mirror of
https://github.com/maziggy/bambuddy.git
synced 2026-10-18 03:54:17 +02:00
56185d2bacd149f13bc7d1ca48d436746f357bdf
736
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 maziggy
|
af867c0392 |
fix(vp): populate bind-interface list on macOS (route non-Linux to psutil)
get_network_interfaces() only sent Windows to the psutil path; macOS fell into the Linux ioctl branch, whose SIOCGIFADDR/SIOCGIFNETMASK ioctls are Linux-only. macOS/BSD have fcntl but different ioctl numbers, so every call raised OSError and the function returned an empty list — the VP bind-interface dropdown showed nothing. Route all non-Linux platforms through the cross-platform psutil path. |
||
|
maziggy
|
379765a46a |
fix(camera): transcode non-JPEG external snapshots to JPEG (#1902)
External cameras in HTTP-snapshot mode failed to load with a repeating "connection lost" when the endpoint served PNG/WebP/BMP stills instead of JPEG (common on IP cameras and reverse-proxied snapshot URLs). The URL rendered fine directly in a browser, but Bambuddy's MJPEG stream wraps every part in a hard-coded Content-Type: image/jpeg boundary, so a non-JPEG payload labelled as JPEG made the browser reject the frame and tear down the whole multipart/x-mixed-replace stream. _capture_snapshot now transcodes non-JPEG stills to JPEG via OpenCV (already a dependency). Genuine JPEG snapshots keep a byte-for-byte fast path; truly undecodable responses (HTML error pages, auth redirects) fall back to the previous raw-return behaviour with a single clear warning instead of a per-frame log flood. |
||
|
maziggy
|
7d4dfd5a7d |
fix(vp): stop uvloop from silently truncating VP FTP uploads (#1896)
Native (non-Docker) installs launched uvicorn without --loop asyncio, so uvicorn[standard] auto-selected uvloop. uvloop's SSL layer drops already-received but still-buffered data when the client closes the data connection without a TLS close_notify while the reader is flow-control paused on slow storage. cmd_STOR writes each chunk to disk inside the read loop, so a slow consumer falls behind, the tail is lost, read() returns a clean EOF, and the loop exits with no exception -- the server acked 226 for a file it truncated itself, then archived, queued, and forwarded the corrupt 3MF to the real printer. Fix in two independent layers: 1. Remove the trigger: add --loop asyncio to every native launch path, matching the Dockerfile -- deploy/bambuddy.service, install/install.sh (systemd + launchd), spoolbuddy/install/install.sh, the Windows NSSM service, README, CONTRIBUTING dev command. 2. Defense in depth (loop-independent): cmd_STOR now validates that a received .3mf opens as a ZIP (reads the central directory, no decompression) before replying 226. A truncated/corrupt file is dropped and answered with 426, and on_file_received never runs -- so a broken upload surfaces as an immediate slicer-side send error instead of being archived and pushed to the printer. Scoped to .3mf; other filetypes pass through unchanged. |
||
|
maziggy
|
53ae5fb620 |
fix(drying): don't stop a running AMS dry on an unreliable humidity re-check (#1892)
Auto-drying stopped manually started (and pre-restart) AMS drying cycles after exactly 30 minutes. The already-drying branch in _check_auto_drying() applied a humidity-based auto-stop despite its own "track but don't stop" comment, and the humidity re-check is unreliable: RH drops steeply in heated air, so the sensor reads ~15-20% within minutes of the dryer starting even with saturated filament. humidity <= threshold was thus effectively always true, and the _min_drying_seconds=1800 floor pinned the stop to the 30-minute mark. This also truncated Bambuddy's own preset-duration dries. Remove the humidity-based early-stop entirely: a running dry now runs to its configured duration (firmware stops it). Scheduling stops (print priority, queue no longer needing the dry) are unchanged via _stop_drying(). Drop the now-unused _min_drying_seconds. |
||
|
maziggy
|
d568307eac |
fix(smart-plug): don't cut power when a print restarts, honor per-plug cooldown setting (#1890)
The print-queue "auto off after this job" trigger used a second, inline auto-off implementation (main.py, print_scheduler.py, print_queue.py) that hardcoded wait_for_cooldown(50C, 600s) — ignoring each plug's configured off_delay_mode / off_delay_minutes / off_temp_threshold — and ignored the return value, powering off on the 600s timeout regardless of print state. A print that failed and was reprinted from the touchscreen got its power cut mid-print. The inline tasks were also uncancellable, so a reprint couldn't abort a pending off. Consolidate all three into SmartPlugManager.schedule_off_after_queue_job, which schedules via the plug's configured strategy (shared with on_print_complete through _schedule_off_per_mode) and is cancellable via _pending_off. Add printer_manager.is_print_active() and guard the actual power-off in _delayed_off and _temp_based_off so no path cuts power on a loaded print. Move the on_print_start cancellation ahead of the auto_on gate so a reprint always aborts a pending off. |
||
|
maziggy
|
bdac27ebee |
fix(slicer): preserve PVA-for-support intent across re-slice of source 3MF (#1881)
Three bugs on the same PLA-model + PVA-support flow, discovered in
sequence:
(A) substitute_unused_plate_filaments inspected only object geometry
(per-object extruder metadata + paint_color triangles) so a support-
only slot was silently treated as "unused" and the user's PVA profile
got overwritten with slot 1's PLA.
(B) _extract_filament_info stripped filament_is_support==1 entries,
hiding PVA from unsliced source archive cards even when the project
explicitly configured it.
(C) --load-settings is authoritative over the source's project_settings.
config, and Bambu's shipped process presets ship enable_support=0
(supports are a per-print decision, not per-quality). So even with
(A) fixed, the sliced output had supports disabled and the PVA slot
loaded but never consumed. Inverts BambuStudio GUI's semantics where
the project overrides the preset.
Fixes:
- New extract_support_filament_slots_from_3mf reads enable_support +
support_filament + support_interface_filament from project_settings.
config; substitute_unused_plate_filaments unions it into the geometry-
derived set.
- _extract_filament_info returns all configured filament types + colours.
- New _patch_process_support_settings overlays four fields (enable_
support, support_filament, support_interface_filament, support_type)
from the source 3MF onto the picked process preset JSON before
--load-settings sees it. Deliberately targeted to what fixes #1881
without widening to a full project-over-preset merge.
|
||
|
maziggy
|
ba6b1a8436 |
fix(vp): evict MQTT clients on drain timeout + tighten TCP keepalive (#1872)
Reporter (H2C + macOS 26.5.1 + BS 2.8.0.50): after every Mac sleep/wake
cycle, Bambu Studio couldn't see the VP or connect to it. Only fix was
quit BS + reboot Bambuddy. The physical printer's own cloud/LAN link
recovered in ~5 s from the same sleep — the delta was in VP session
handling.
Log evidence (bug-report-assets/logs/ddf1ede75df045cd94ad223d0f08f88a):
- 14:04:06 healthy `1Hz status push: 60 pushes/min to :54698`
- 14:04:06 → 14:09:16: five minutes of SSDP-only, no push summary for
:54698, no OSError, no disconnect line
- 14:09:16: new source port :54861 connects and authenticates fine —
the server was not rejecting reconnects
- 14:10:17 first DEBUG line: `MQTT drain timeout for
device/…/report — client may be busy` — smoking gun
Root cause: `_publish_to_report:1149` caught `asyncio.wait_for(drain,
timeout=5)` TimeoutError at DEBUG and returned silently. TimeoutError
is not OSError, so the push loop's `except OSError` at :441 never saw
it — the zombie writer sat in self._clients until the kernel's default
TCP keepalive detected the dead peer (Linux default: ~2 h 11 min).
Two hunks:
1. `_publish_to_report`: on drain TimeoutError, close the writer (best
effort, catch Exception so an already-broken close() doesn't mask
the raise) and raise BrokenPipeError, which IS OSError. Push loop
evicts on the same tick.
2. `_handle_client`: after SO_KEEPALIVE=1, set TCP_KEEPIDLE=60,
TCP_KEEPINTVL=15, TCP_KEEPCNT=4 — dead-peer detection in ~2 min
instead of ~2 h. `getattr(socket, ...)` guards keep it cross-
platform (macOS uses TCP_KEEPALIVE not TCP_KEEPIDLE, other kernels
may not expose all three — skip whichever is missing).
What I got wrong first pass and corrected on log-read: hypothesised
"missing MQTT session takeover on same client_id". Wrong. _handle_connect
parses the protocol client_id but discards it (assignment commented out
at :762), and self._clients is keyed on `f"{addr[0]}:{addr[1]}"` (socket
peer), so every reconnect gets a distinct key. No takeover race exists.
The log fixed this: the "not seen" symptom is BS-side (macOS UDP
receive after sleep + BS holding the pre-sleep socket state), but the
server-side amplifier was the zombie writer.
|
||
|
maziggy
|
932aa557f2 |
fix(vp): route non-proxy camera passthrough by target model — 6000 for A1/P1 (#1868)
Non-proxy VP mode hardcoded the camera-passthrough TCPProxy to
listen_port=322 / target_port=322 regardless of the target printer's
model. That port is correct for RTSPS models (X1/X2/H2/P2S), but A1 /
A1 Mini / P1P / P1S use Bambu's proprietary chamber-image protocol on
port 6000. Result: A1/P1 targets got a 322 listener with no upstream,
OrcaSlicer Liveview failed with [2:-10061], BambuStudio's camera button
timed out.
Reporter confirmed a raw socat forwarder `<VP-IP>:6000 → <P1S-IP>:6000`
restored the stream — the target camera works, the VP just wasn't
publishing it.
Proxy mode was unaffected because SlicerProxyManager already opens 6000
(nominally file-transfer; Bambu reuses the port for chamber-image), so
the passthrough coincidentally works there.
Fix: read the target's model from
`printer_manager.get_client(target_id).model` at the same point we read
target_ip, then use `get_camera_port(target_model)` — the same source of
truth as routes/camera.py — to pick 322 or 6000. Model comes from the
physical printer, NOT self.model (the VP's spoofed identity has no
bearing on how the real device serves its camera).
Renamed the log tag from "RTSP" to f"Camera-{camera_port}" so support
bundles show which protocol the VP is fronting at a glance. Kept the
_rtsp_proxy attribute name to keep the diff tight; the block comment
spells out that it doubles as chamber-image passthrough on A1/P1.
|
||
|
maziggy
|
2d13e77f1b |
fix(mqtt): capture finish photo on last-layer edge, not FINISH state (#1867)
A1 Mini firmware skips stg_cur=22 entirely, so the finish-photo fallback fires at gcode_state=FINISH — which runs AFTER Bambu Studio has already executed the user's End G-code. Users with SwapMod plate-swap injected into End G-code always got a photo of the swapped (empty) plate. Add a layer_num >= total_layer_num edge trigger in _parse_print_data so the pre-capture fires the moment the last object layer completes, on every printer variant. Guarded by the existing _finish_photo_captured one-shot so stage-22 and FINISH-state hooks become no-ops for the same print — no framing regression on AMS printers without custom end G-code. |
||
|
maziggy
|
9f4f16e5bd |
fix(spoolman): split mid-print usage across AMS backup switch (#1793)
usage_tracker's tray-switch split has never had a Spoolman peer. An AMS same-material runout switch mid-print charged the whole slot to the origin spool via the (via tag) path and double-credited the backup via remain-delta — origin exceeded initial_weight. Extract the segment-math into utils/tray_split.compute_tray_split_grams and call it from both writers so the two inventory backends attribute mid-print switches identically. spoolman_tracking gains _report_spool_usage_split_by_tray_changes; the Path 2 remain-delta fallback now skips trays the split path covered, killing the double-count. |
||
|
maziggy
|
b71d486058 |
fix(printers): drop P1S / P1P from door-sensor badge whitelist (#1866)
P1S has an enclosure door but no hall sensor for it; P1P has no enclosure at all. Both models were rendering a permanent green "Door Closed" chip driven by bit 23 of the stat field, which stays 0 forever on that firmware. Whitelist now covers only models that actually ship with a door sensor: X1 family, X2D, P2S, and H2 family. Corrected the matching stale comments in the PrinterStatus TS interface (client.ts) and PrinterState dataclass (bambu_mqtt.py). Backend parse left as-is — cheap and future-proof if Bambu ever wires the P-series enclosure into a sensor. |
||
|
maziggy
|
e33ab07a93 |
fix(cloud): send required ?version= param on singular GET/DELETE of slicer setting endpoint (#1815)
get_setting_detail and delete_setting were hitting
/v1/iot-service/api/slicer/setting/{id} without the version query
parameter Bambu Cloud requires — every call returned HTTP 400
"field 'version' is not set". The sibling plural GET
(get_slicer_settings) has always sent it; the comment above
_SLICER_API_VERSION documents the contract for the endpoint subtree.
Missed when the placeholder landed in the 2026-05-12 compliance rework.
Downstream effect: slicer_filament_resolver.resolve_slicer_filament's
PFUS branch swallowed the 400, fell through to normalize_slicer_filament,
and caller inventory.py generic-material-fell-back tray_info_idx to
GFL99/GFG99. BambuStudio's AMS panel reads the printer's tray_info_idx
echo, so the user saw "Generic PLA" instead of the custom cloud preset.
Masked for 50 days by two rescue paths in the caller: prior-slot
tray_info_idx reuse, and stored spool_k_profile → live state.kprofiles
realign. Reporter's spool 54 → tray 2 assign had neither.
Adjacent surfaces also fixed by the same two-line change: the delete
cloud preset UI route, the whole update_setting flow (get_setting_detail
→ delete_setting → POST), preset_resolver's cloud branch, and three
UI-facing cloud.py routes that fetch setting detail.
get_setting_detail also includes the truncated response body in the
raised BambuCloudError so the next contract change is self-diagnostic
from support-bundle logs.
|
||
|
maziggy
|
c32bc82dd4 |
fix(scheduler): cancel during queue dispatch actually cancels (#1853)
Symptom: user queued a batch of 10 prints, pressed Cancel on a pending row, the print started anyway. Repeated consecutively. Support bundle also showed 15x "sqlite3.OperationalError: database is locked" from the sensor history recorder in the same 8-minute window. Root cause is a check-then-act race in _start_print. check_queue takes a snapshot of pending items, then _start_print does FTP delete + FTP upload (5-30s) before the unconditional item.status = "printing"; db.commit() at line 2792. /cancel commits status='cancelled' in a separate session during that window; the scheduler's stale in-memory write overwrites it and start_print ships. The lock-contention finding is the same shape from a different angle: _start_print did await db.flush() at line 2555 (after item.archive_id set + library_file delete) which opens the SQLite WAL writer lock and holds it through the FTP upload, queueing every concurrent writer behind it including the user's own cancel commit. Three guards layered: 1) Atomic CAS at the pending->printing transition. UPDATE print_queue SET status='printing', started_at=NOW() WHERE id=:id AND status='pending'. rowcount==0 means user won; log abort, best-effort delete_file_async the file we just FTP'd up so it doesn't leak into the printer's BambuStudio file picker, send queue_item_failed WS event with reason="cancelled_mid_dispatch", return without calling printer_manager.start_print. 2) Early db.refresh(item) + bail right after the printer connectivity check. Saves the wasted FTP upload when the row was already cancelled before _start_print resumed. Defense in depth; guard 1 catches the same case at the CAS point. 3) flush -> commit before the FTP block. The library-file-to-archive promotion's writes commit cleanly, WAL writer lock releases, sensor history and concurrent cancels stop queueing behind the scheduler. The flush-not-commit pattern was rolling back a pointer to an already-committed archive row, so the new behaviour matches reality (archive committed, pointer committed, FTP unblocked). |
||
|
maziggy
|
61a7f2e4ac |
feat(scheduler): preheat & heat-soak before queued prints with per-filament chamber targets + airduct flap control (#1468)
New scheduler stage that heats the bed (and the chamber, on supported
printers) and holds at temperature before each queued print starts —
the heat-soak engineering filaments need for adhesion and warp
control. Bambuddy waits between FTP upload and start_print, so the
soak runs while the printer is otherwise idle. M191 is silently
ignored by Bambu firmware, so doing this at the orchestration layer
is the only place it works.
Resolution order at dispatch:
1. PrintQueueItem.preheat_override ∈ {inherit, on, off}.
'off' skips entirely; 'inherit' falls back to the global
preheat_enabled toggle; 'on' forces the stage even when the
global is off.
2. chamber_target = item.preheat_chamber_target_override
?? max(filament_map[normalize(t.tray_type)] for loaded slots)
?? 0.
Mixed PA+PLA picks PA's 50 (max-across-slots — PA's chamber
requirement is binding, PLA doesn't suffer being warm). PLA-only
derives 0 and skips the chamber phase automatically.
3. Three hardware tiers for chamber heat:
- Active chamber heater (H2C/H2D/H2D Pro/H2S/X2D/X1E) → M141 +
chamber-sensor wait
- Chamber sensor only (X1C/P2S) → no M141, passive bed-radiation
wait with hard max-wait cap
- No chamber sensor (P1S/P1P/A1/A1 Mini) → bed + soak timer only
4. Airduct flap (H2C/H2D/H2D Pro/H2S/X2D/P2S) auto-switches to
match the chamber target — heating mode for engineering
filaments, cooling mode for PLA. Bambu firmware does NOT
auto-switch the flap with M141, so without this an ABS print
on a previously-cooling flap fights the open exhaust, and a
PLA print on a previously-hot flap recirculates ABS heat.
Idempotent: only fires set_airduct_mode when current ≠ desired.
Settings → Workflow → Queue & Dispatch → Preheat & Heat Soak card:
master enable toggle (default off — disabled installs see no change),
per-filament chamber-target editor (replaces a single global int that
shipped in the first cut and couldn't serve PA + PLA in the same
config), preheat_max_wait_seconds, preheat_soak_seconds. The Print
Options panel in PrintModal gets a Preheat sub-section with the
tri-state Inherit/On/Off control and an optional chamber-target
override input.
DB migration: PrintQueueItem gains preheat_override VARCHAR(10)
DEFAULT 'inherit' and preheat_chamber_target_override INTEGER NULL.
Idempotent via _safe_execute. Existing rows behave exactly as before
the migration.
Best-effort throughout: printer drops, refused M141 or set_airduct,
missing bed temp, lost MQTT state mid-wait all log and return cleanly.
Normal upload + start path runs after this returns regardless.
|
||
|
maziggy
|
a45d32efd0 |
fix(hms): wrong-plate Ignore actually ignores + buttons read as buttons + ack-detection survives transient re-pause (#1869)
The HMS error modal had three compounding bugs that surfaced when a user forced a wrong-plate HMS (0500_8051) and tried to dispatch the per-fault actions. (1) IGNORE_RESUME did not ignore. Bambuddy redirected the action on state=PAUSE to a plain `resume` command, citing a #1830 verdict that BambuStudio's "err-bearing shape" was firmware-silently-rejected. BambuStudio source disagrees: DeviceErrorDialog.cpp:600 dispatches IGNORE_RESUME via command_hms_ignore, whose wire shape is {command:"ignore", err:"<decimal>", param:"reserve", job_id:...}. That's a distinct command from `resume` — the firmware suppresses the next re-check AND auto-resumes in one operation. Plain resume means "re-check normally", which is exactly why the wrong-plate detection re-fired 1-2 s after the user clicked Ignore. The #1830 "err-bearing shape rejected" test almost certainly sent the err as a hex shortcode; BambuStudio passes std::to_string(int m_error_code) i.e. the DECIMAL form, which is what the firmware matches against. (2) Action buttons read as inert badges. The button className used `hover:${buttonHoverColor}` — a template-literal interpolation Tailwind's JIT scanner can't see as a literal string, so the per-severity hover utility never reached the compiled CSS. Same bg/text color as the severity badge above and no border made it read as another label. No disabled state and no spinner during the 2.5 s ack wait left clicks sitting silently inert. (3) Ack-detection 502'd on legitimate ack. The route compared (gcode_state, hms_errors-len) before vs after publish; wrong-plate re-pause round-tripped both fields to their pre-publish values inside the 2.5 s window → false 502 even though the firmware fully ack'd. PROBLEM_SOLVED_RESUME working but IGNORE_RESUME 502'ing on the same fault was the same race resolving differently. Fixes: bambu_mqtt.py — new hms_ignore_command() publishes the BambuStudio shape; existing hms_ignore(persistent) renamed to hms_idle_ignore (unchanged shape, used by NO_REMINDER_NEXT_TIME per DeviceErrorDialog.cpp:588). Dispatch routes IGNORE_RESUME, IGNORE_NO_REMINDER_NEXT_TIME, and DONT_REMIND_NEXT_TIME to hms_ignore_command (BambuStudio routes all three to the same command_hms_ignore — the "don't remind" half is the firmware's job). NO_REMINDER_NEXT_TIME stays on hms_idle_ignore type=0. Hex → decimal err conversion at the helper layer with a defensive fallback. job_id=None → empty string (matches BambuStudio's std::string default). HMSErrorModal.tsx — getSeverityInfo loses the dead buttonHoverColor field. Action button uses static `bg-white/10 hover:bg-white/20 active:bg-white/30 text-white border border-white/20`, wires `disabled={!hasPermission||mutation.isPending}`, and renders `<Loader2/>` only on the button whose (action,print_error) matches mutation.variables. printers.py — ack-detection probes `client._last_message_time` (bumped on every MQTT push regardless of payload) rather than diffing state fields. The pushall that follows every command guarantees a fresh push lands inside the 2.5 s window on any healthy printer; only firmware-silent-drop leaves the timestamp untouched, which is the 502 path #1830 wanted. |
||
|
maziggy
|
3ef197e4e0 |
feat(slicer): Pipelines — multi-copy + class targeting + fanout + runs dashboard + retry-failed + WS updates (#1425 PR C — completes the v3 design)
PR A/B turned the slice modal's preset bundle into a one-click dispatch
with a pinned target printer. PR C closes the original issue: operators
type in a number of copies, Bambuddy slices once and distributes prints
across a fleet per the pipeline's chosen fanout strategy. A new dashboard
surfaces every run with filters, expandable per-copy status, cancel,
and retry-failed-copies. WS pushes keep everything live.
Backend
- copies field on POST /run, capped by new pipeline_max_copies setting
(default 50, hard cap 1000). PipelineRun.parent_run_id chains retries.
- SlicerPipelineUpdate accepts target_kind (specific_printer /
printer_class), target_model_class, fanout_strategy.
- Eligibility matcher branches: class-targeting enumerates matching
Printer rows, runs per-printer checks via a status_lookup closure,
returns printer_reports[]. New issue kinds: no_class_matches,
class_not_set.
- _pick_assignments distributes copies per strategy:
- max_parallel: target_model set, printer_id None — scheduler picks
- round_robin: copy i → eligible[i % N], fixed printer_id
- fill_one_first: all copies pinned to eligible[0]
All three reuse the slice-once path through slice_dispatch.enqueue.
- New routes:
- GET /pipeline-runs (paginated, filterable by pipeline + status)
- POST /pipeline-runs/{id}/retry-failed (creates child run with
copies = failed+cancelled count, parent_run_id set)
- Cancel cascades to all N queue entries (only pending/queued)
- _roll_up_run_status computes run-level status from per-job statuses;
introduces partial_failure for "some completed, some failed".
- ws_manager.broadcast_to_user emits pipeline_run_updated on every
state transition with the full materialised response.
Frontend
- Pipeline editor: target_kind radio + class picker (filtered to
installed models) + fanout-strategy radio. Read-only row shows
"X1C · Round robin" for class pipelines.
- RunWithPipelineModal: copies number input bounded by
settings.pipeline_max_copies. Accepts class-targeted pipelines.
- Settings → Workflow → Queue & Dispatch: new "Slicer Pipeline limits"
card with the max-copies input.
- New /pipelines/runs dashboard page (sidebar entry, gated on
pipelines:read). Two-filter dropdown, 25-per-page pagination, per-row
expandable to job list, Cancel + Retry-failed buttons.
- useWebSocket case for pipeline_run_updated invalidates both
pipeline-runs-all and pipeline-runs/{id} query keys.
|
||
|
maziggy
|
4bbf0f031e |
feat(slicer): Pipelines — archive entry point + slicer progress toast (#1425 PR B follow-up)
Two real gaps from the PR B drop:
1. Run-with-pipeline only existed in the file manager. Operators who keep
working files in archives had to copy them to the library to use a
pipeline.
2. Triggering a slice via a pipeline produced a silent multi-second-to-
minute wait. The manual SliceModal flow shows the sticky
"Slicing X - Generating G-code 75%" persistent toast; the pipeline
path went through asyncio.create_task directly and never registered
with SliceJobTracker.
Archive entry point
- POST /slicer-pipelines/{id}/check-eligibility and /run accept
source_archive_id as an alternative to source_library_file_id (XOR,
enforced by Pydantic validator).
- PipelineRun.source_archive_id is a new nullable FK column with the
ALTER TABLE migration in run_migrations (idempotent via _safe_execute,
works on SQLite + Postgres).
- _resolve_source branches: archive path reads source_3mf_path with
fallback to file_path, mirroring routes/archives.py.
- ArchiveCard's context menu picks up a "Run with pipeline" item next to
Slice (only on source archives), gated on useSlicerApi + pipelines:run.
Slice (only on source archives), gated on useSlicerApi + pipelines:run.
- Path-safety: SEC-PATH-OK markers added at both LibraryFile.file_path
and archive.source_3mf_path join sites, citing the upload-time
validators.
Progress toast
- Pipeline orchestration is now the `run` callable of a
slice_dispatch.enqueue call — the same dispatcher SliceModal uses —
instead of a bare asyncio.create_task. The SliceJob lifecycle drives
the existing progress toast end to end with no separate notification
surface for pipeline runs.
- PipelineRun.slice_job_id is set before the 202 returns.
- RunWithPipelineModal calls useSliceJobTracker().trackJob() from
runMutation.onSuccess.
- RunWithPipelineModal source prop is now {kind, id, filename}
mirroring SliceModal.SliceSource; api.checkPipelineEligibility +
api.runPipeline take a discriminated-union source argument.
|
||
|
maziggy
|
9033b0f81e |
feat(toast): restore upload-progress toast for scheduler dispatches (#1625 follow-up)
FTP push to the printer into the server-side scheduler tick. That
removed the browser-side upload the old XHR-progress modal listened
to — users only saw the queue item flip to "active" with no visibility
into the FTP push + the H2D/H2D Pro 80-210 s project_file digestion
window before the printer actually started.
Port the legacy bg-dispatch toast rendering from
0b43ac0d:frontend/src/contexts/ToastContext.tsx lines 510-650 back in
place verbatim — same DOM tree, same Tailwind classes, same
formatFileSize bytes line, same uppercase status chip, same collapse
chevron, same awaitingPrinter derivation, same auto-dismiss. The only
adapt is the event ingestion: a useEffect maps the four scheduler-side
WS events to the legacy DispatchToastJob shape.
The toast materializes when the FTP push to the printer ACTUALLY
STARTS (queue_item_uploading) — NOT on POST /queue. A draft that
fired at queue-add made the toast jump to "Dispatched" before any
upload had happened.
Four backend WS events drive it: uploading (carries printer_name +
total_bytes), upload_progress (throttled at 200 ms / 256 KB to match
legacy background_dispatch.py:614-615 1:1, first call always emits,
completion always emits; an _UploadProgressBridge bridges from the
FTP executor thread to the asyncio loop), acked (printer transitioned
out of pre_state), failed (with a reason key the toast looks up as
dispatchToast.failed.{reason}). No queue_item_dispatched event: the
legacy path kept status=processing from upload start until printer
ack, "Awaiting printer..." derives from upload_progress_pct >= 99.9
(legacy uploadDoneAwaitingPrinter trick).
Per-user routing: WS connect resolves the principal username to
User.id once and stashes it on websocket.state, so
ws_manager.broadcast_to_user filters O(connections). Auth-disabled
installs route user_id=None to all connections — matches the legacy
single-user behaviour. The watchdog receives created_by_id through a
new kwarg so the static method can still emit acked without
re-fetching the queue item.
|
||
|
maziggy
|
d4ad41d850 |
fix(hms): action buttons actually reach the printer (#1830)
Three distinct bugs combined into one user-facing failure: clicking
Stop / Problem-solved-and-resume / Ignore-and-resume returned 200 OK
but the printer didn't act, modal stayed up, print stayed paused.
Verified by injecting candidate command shapes on device/<sn>/request
against a live H2D paused on a wrong-plate HMS (print_error=0x05008051).
(1) hms_resume / hms_stop dispatched the "err"-bearing shape that
BambuStudio doesn't actually send; Bambu firmware silently rejects it.
Both now send the plain shape ({"print":{"command":"<x>","param":"",
"sequence_id":"0"}}). PAUSE -> FAILED in 1.7s for stop, PAUSE -> RUNNING
in <2s for resume.
(2) IGNORE_RESUME mapped to idle_ignore, which is BambuStudio's
"dismiss a warning" command and only works for non-pause warnings.
hms_ignore now branches on state.state == "PAUSE": paused -> plain
resume; not-paused -> idle_ignore with the full-length err.
(3) 64-bit hms[]-array faults were truncated to a non-matching err.
short_code in _parse_status discarded 32 of the 64 identifier bits, so
the firmware didn't match it to the active fault. HMSError.full_code
now carries the canonical hex identifier (16 chars for hms[] faults,
8 chars for print_error faults). Catalog lookup tries 16-char first,
falls back to 8-char. HmsActionBody.print_error pattern relaxed to
^[0-9A-Fa-f]{8}([0-9A-Fa-f]{8})?$.
(4) execute_hms_action returned publish-success as success, masking
every silent-rejection bug above as 200 OK. Route now snapshots
(state.state, len(state.hms_errors)) before dispatch, awaits
HMS_ACTION_ACK_WAIT_SECONDS (default 2.5s, module-level so tests
override), and returns 502 with "Printer did not acknowledge HMS
action within 2.5s" if state didn't move.
|
||
|
maziggy
|
31e61cebd7 |
feat(sponsor-prompt): lower print/archive/cost thresholds to fire for typical new installs
The toast was calibrated for power users — lowest bars were 100 prints,
50 archives, 100 cost. Most installs never crossed any of them, especially
with the install base ~doubling since March. Matomo confirms: only 4
prints-100 and 3 archives-50 deeplink visits to /sponsors.html in a 7-day
window despite tens of thousands of weekly pulls.
Adds lower thresholds without changing priority order or cooldown:
PRINT_MILESTONES = (10, 25, ...)
ARCHIVE_MILESTONES = (5, 10, ...)
COST_MILESTONES = (25, 50, ...)
Existing toast copy uses {count}/{total} interpolation in all 11 locales,
so no i18n changes. Tests rebalanced so "below the floor" still tests
with the new floor; new test_fires_at_lowest_threshold pins prints-10.
|
||
|
maziggy
|
510005f043 |
fix(printers): cam wall — offline tile chip + don't kill shared
streams when one viewer closes
1) Offline tiles now show OFF (not LIVE)
CameraWall.modeByPrinter assigned 'live' to any visible printer
without considering status.connected, so a disconnected X1C wasted
a live-budget slot AND rendered the red LIVE chip on top of the
WifiOff placeholder. Disconnected printers now map to 'paused' and
don't decrement liveBudget — the existing WifiOff + Off chip
rendering takes over.
2) /camera/stop no longer kills other viewers' streams
The cam-wall tile, EmbeddedCameraViewer, and the /camera/:id popup
all subscribe to the same fan-out broadcaster for a printer.
/camera/stop used to unconditionally shutdown_broadcaster() + kill
every ffmpeg process for the printer, so closing the embedded viewer
while the cam-wall tile of the same printer was live force-killed
the source the tile was pulling from — the tile's <img> errored.
New get_subscriber_count(key) accessor in camera_fanout.py exposes
the broadcaster's subscriber list length. /camera/stop now reads
that first; when >= 1 subscriber is still attached, return
{stopped: 0, skipped: true} and leave the broadcaster + ffmpeg
processes alone. The leaving viewer's HTTP teardown still runs the
natural iter_subscriber.finally -> unsubscribe path, so its slot is
released; the broadcaster keeps serving the other viewers. Single-
viewer close still hits the immediate force-teardown (count is 0).
|
||
|
maziggy
|
6f727d300a | Post work PR #1743 | ||
|
Zelda
|
3ddf8d847e | [Feature]: HMS Actions (#1743) | ||
|
Ed
|
4c67d8a4e1 | feat: Unify print dispatch through the scheduler (#1625) | ||
|
maziggy
|
fd61812d01 |
feat(drying): show active-cycle filament + target temperature on the AMS drying badge
Bambu's per-tick AMS push carries only the dry_time countdown — the
filament name and target temperature the user chose are never echoed on
the wire. The AMS card had no source of truth for them and rendered the
bare "Drying · 11h 35m left". The badge now shows
"Drying · PETG @ 65°C · 11h 35m left", matching the cycle the user
actually started.
BambuMQTTClient caches {ams_id: {filament, temp}} on send_drying_command
(mode=1), clears on mode=0 and on the dry_time falling edge to 0 — the
same per-AMS edge detector that drives the smart-plug-after-drying
callback. PrinterManager.get_drying_targets exposes it, the four
printer_state_to_dict call sites thread it through, AMS schema gains
dry_target_temp + dry_filament, and routes/printers.py builds the same
fields into the manually-constructed AMSUnit response.
When no cached target exists (drying started in a previous backend
lifetime, or initiated outside Bambuddy), the badge falls back to the
first loaded tray's tray_type + RFID-recommended drying_temp — the
heuristic the popover already uses to seed defaults.
i18n: printers.drying.targetSummary = "{{filament}} @ {{temp}}°C" in
all 11 locales. Parity check 5356 leaves per locale.
Note: a user reported the H2D's own physical display still labels the
cycle by the loaded tray's filament (e.g. "PLA" instead of the
Bambuddy-requested "PETG"). The wire payload is correct end-to-end —
journalctl shows filament: "PETG" sent and result: success ACKed — and
the badge in Bambuddy's own UI now reflects what we actually sent,
independent of the firmware's display choice.
|
||
|
maziggy
|
8d6f701f1d |
feat(drying): continue drying while printing + gate rotate-spool when tray loaded (issue #1816)
Continue Auto-Drying while a print is running on capable hardware. New Settings > Print Queue > "Continue drying while printing" toggle (default OFF). Extends _check_auto_drying in print_scheduler.py to evaluate running printers when supports_drying_while_printing(model, firmware) returns true. Strict allowlist verified per Bambu wiki release notes for "Print While Drying" / "printing while filament is drying": H2D 01.03.00.00+, H2C/H2S/P2S/H2D Pro 01.02.00.00+, X2D/A2L 01.01.00.00+, X1C 01.11.02.00+. P1*, A1, A1 Mini, X1 (non-C), X1E intentionally excluded. Mid-print drying temperature is capped at max(40, preset_temp - 5) to protect spools from heat damage inside the hot enclosure during a print, matching Bambu's own "lower drying temperature during printing" guidance. Rotate-spool toggle in the drying popover is now disabled when any tray in the targeted AMS has filament threaded into the feed tube (tray.state === 11). The whole AMS rotates as one mechanism, so a single loaded slot locks the entire unit. Previously the toggle was always clickable and the firmware rejected with dry_sf_reason=[3] (ConsumableAtAmsOutlet) after the click. The first cut keyed on the printer-level tray_now but missed the H2D's typical post-print state where tray_now resets to 255 while filament stays in the tube — the per-tray state field reports it correctly. Submission also clamps rotateTray off so a stale-true state from a previous AMS can't leak through. Backend: supports_drying_while_printing in printer_manager.py covers display names and internal SSDP/MQTT codes (O1D, O1E/O2D, O1C/O1C2, O1S, N6, BL-P001, N7, N9). New print_drying_enabled boolean in settings schema. Frontend: toggle on SettingsPage, gate + clamp on PrintersPage drying popover using existing amsData cache. i18n: 3 new keys x 11 locales, no English fallback. Tests: 7 cases on the gate matrix (TestSupportsDryingWhilePrinting), 4 cases on the scheduler mid-print path (TestMidPrintDrying), 9 cases on the rotate gate state transitions. Full backend pytest -n 30 green (4251/4251), ruff clean, frontend npm run build clean, i18n parity 5355 leaves per locale. |
||
|
maziggy
|
e09a33be16 |
feat(spoolman): remain%-delta fallback for no-3MF "Untitled" prints (#1820)
Brings the Spoolman writer up to parity with the internal-inventory side, which has had this fallback since #1119. When a Bambu print starts without a retrievable .gcode.3mf on the printer (typically an unsaved BambuStudio project, subtask_name='Untitled'), Spoolman no longer silently skips the print's filament consumption. - ActivePrintSpoolman.filament_usage now nullable; new tray_remain_start column captures per-slot {remain, tray_uuid} at print start. - store_print_data: always snapshots remain, even when 3MF is present (mirrors usage_tracker.on_print_start), so partial-3MF prints can also fall back per-slot. - report_usage: 3MF path stays primary; new _report_remain_delta_for_slots handles slots the 3MF didn't cover via delta * Filament.weight / 100, resolving the spool via the existing slot-assignment table. - _report_partial_usage: same fallback for aborted no-3MF prints. #1119 invariant preserved: per-slot, per-print, gated on a valid start/current remain AND a resolvable Spoolman spool. Uses curated Filament.weight (not MQTT's unreliable tray_weight) — same trick the internal-inventory side uses. Mid-print spool swap detected via tray_uuid mismatch → slot skipped. Double-charge prevented via handled_global_tray_ids dedup. |
||
|
maziggy
|
261c376d1f |
fix(spoolbuddy): close #1815 — preserve PFUS/PFCN setting_id in resolver
SpoolBuddy "Assign to AMS" with a Bambu Cloud user preset (PFUS) left Bambu Studio showing "Generic <Material>" instead of the user's custom preset. Root cause: the defensive filter that catches PFUS/PFCN leaks into tray_info_idx also cleared setting_id — but PFUS/PFCN are VALID setting_id values, just not valid tray_info_idx values. When the cloud detail lookup didn't return a filament_id (cloud unauth on the on_ams_change replay path, transient failure, or older custom presets), both fields got cleared and the caller's generic-material fallback overwrote setting_id with GFSG99 — slicer resolved to Generic PETG. Fix: the filter still clears tray_info_idx for PFUS/PFCN/material- name leaks, but preserves setting_id when it's a valid slicer reference (PFUS / PFCN / GFS). Material-name leaks still clear both. Post-fix MQTT carries tray_info_idx=GFG99 (firmware-acceptable for HMS/drying/colour) AND setting_id=PFUS<hash> (slicer uses this to load the actual user preset). What stays the same: Bambuddy's own AMS card still displays the generic material on cloud-unauth paths — same fundamental limitation as today. Fixing that needs a deeper layered fallback (LocalPreset name match, printer kprofile query, cloud-detail cache) and is out of scope for this drop. Slicer-side fix is the reporter's explicit ask. |
||
|
maziggy
|
4b0150b0ec |
fix(mqtt): close #1822 — promote H2S tray_now to 254 on all-external prints
H2S firmware reports tray_now=0 (the AMS's idle slot) throughout external-spool prints instead of 254 like X1C/P1S/A1 do, so the single-nozzle branch's 0-3 passthrough landed state.tray_now on slot 0 — UI highlighted AMS SLOT 1 instead of the external spool. Usage credit was unaffected (#1276 covers that via ams_mapping). The single-nozzle branch now checks _captured_ams_mapping (slicer- captured per-filament mapping that the request-topic intercept already tracks) before the existing P2S multi-AMS resolver. When every entry is -1, the print uses ONLY the external spool, so state.tray_now is promoted to 254. Narrow on purpose: AMS-only [5] and mixed [5, -1] are NOT overridden — we have no evidence H2S misreports mid-print swaps, and trusting the firmware preserves correctness for users with multi- filament setups. No-mapping prints (printer-screen start) fall through unchanged. |
||
|
maziggy
|
2fe9896917 |
fix(queue): close #1818 — Resume after failure clears the gate
Single failure on a printer with require_previous_success queue items
permanently skipped every downstream + every new item — the
_check_previous_success lookback always walked back to the original
failed row (skipped is excluded from the lookback), and no code path
could dismiss that failure.
Three pieces:
1. PrintQueueItem.gate_acknowledged Boolean column (default False).
SQLite/Postgres-safe ALTER, dialect-branched DEFAULT.
2. _check_previous_success skips rows where gate_acknowledged=True so
acknowledged failures walk past the lookback. Fresh post-resume
failures still gate independently.
3. POST /api/v1/queue/printer/{printer_id}/resume — gated on
QUEUE_UPDATE_ALL — acknowledges failed/aborted items for that
printer AND restores items where
status='skipped' AND error_message='Previous print failed or was
aborted' back to pending in one transaction. Returns
{acknowledged, restored}.
Frontend banner above the active Queue tab surfaces blocked printers,
fires a warning-variant ConfirmModal, and shows a precise toast on
success.
|
||
|
maziggy
|
38b8a87c11 |
fix(vp): close #1780 race — bump slicer-MQTT wait to 5s + retroactive stamp
Round 2 (
|
||
|
maziggy
|
7cb905ad0c |
feat(inventory): toggle to disable auto-add of unknown RFID spools + global confirmation modal (issue #1764)
New setting "Auto-add unknown RFID spools" under Settings -> Filament -> Filament Tracking,
default ON for back-compat. When turned off, the backend stops auto-creating an inventory
record for an unknown RFID tag and instead broadcasts an unknown_tag WS event that pops
a global confirmation modal in the Bambuddy UI showing the printer / AMS-X label / slot /
material / colour. Add or Cancel; no nag on every MQTT push.
Backend
- Module-level _unknown_tag_last_broadcast dict dedupes per (printer, slot, tag). Set is
committed AFTER ws_manager.broadcast() returns so a crashed broadcast doesn't poison
the dedup and permanently silence the slot.
- Empty-slot MQTT push clears that slot's entry, so remove+reinsert reliably re-prompts.
- Successful matches via get_spool_by_tag / find_matching_untagged_spool / create_spool
also clear the entry so a future tag swap re-prompts.
- Tray data (tray_type, tray_color, tray_sub_brands, tray_count) shipped in the WS payload
directly so the modal renders the real material / colour instead of relying on the
React Query cache that lags the WS event by several seconds.
- Two new endpoints back the modal's confirm action:
POST /api/v1/inventory/spools/from-slot (INVENTORY_UPDATE)
POST /api/v1/spoolman/spools/from-slot (FILAMENTS_UPDATE)
Both look up the slot's tray data server-side and create + auto-assign atomically.
- Spoolman /from-slot now raises HTTP 500 when the slot-assignment INSERT fails instead
of returning success while the DB rolled back the binding.
- sync_ams_tray gained an optional auto_add_unknown_rfid kwarg (default True so existing
callers are unaffected); auto-sync and both manual sync routes thread the setting.
Frontend
- useUnknownTagPrompt hook listens for the unknown-tag CustomEvent, reads the tray fields
out of the event detail, and feeds a single-modal queue. No long-lived dismissed set;
the backend dedup handles spam suppression.
- UnknownSpoolModal wraps the existing ConfirmModal with a material + colour-swatch
preview block.
- Mounted in Layout.tsx alongside useSponsorPrompt so SpoolBuddy kiosk / login / setup
routes are excluded.
- getAmsLabel moved to utils/amsHelpers.ts; ConfigureAmsSlotModal.tsx and PrintersPage.tsx
both import the shared version (canonical AMS-A / HT-A / External labels).
- AppSettings TS interface gained spoolman_enabled, auto_add_unknown_rfid, spoolman_url
so the runtime cast in the hook is no longer needed.
- SpoolmanSettings.tsx gets a new toggle row in the Filament Tracking card, visible in
both built-in and Spoolman branches; auto-save + toast already wired.
|
||
|
Stefano Maffeis
|
271560f7cb | Fix camera port diagnostic for A1/P1 printers (#1799) | ||
|
maziggy
|
7e6b390d74 |
feat(notifications): template-driven finish-photo email embed + user_print_* rename (#1792)
Reporter (email provider, "Reason: unknown" failures) wanted a camera snapshot in failure emails. The finish-photo capture path shipped in 0.2.5b1 (#1397) already loads JPEG bytes into archive_data["image_data"] for terminal print events, and pushover/telegram/discord/ntfy users have been getting them. Email was the one provider that dropped the bytes on the floor. Reporter separately flagged that the Message Templates list shows "Print Completed" and "User Print Completed" with no visual cue they're different dispatches. Both fixes in one commit because they touch the same UI surface (Message Templates) and both stem from the same reporter conversation. 1) Inline finish-photo embed in email — template-driven, opt-in. _send_email now accepts finish_photo_url alongside image_data. Inline embed fires only when bytes are present AND URL is set AND the rendered body contains that URL — i.e. the user's template referenced the existing {finish_photo_url} variable. The multipart/related shape wraps a multipart/alternative (plain + HTML) plus an inline MIMEImage with Content-ID: <bambuddy-finish-photo>. The HTML part replaces the escaped URL in-place with the cid <img>, so the image appears WHERE the user put the variable in the template, not stapled to the bottom. Plain-text part keeps the URL as a clickable link for non-HTML clients. First draft of this fix unconditionally inlined the photo whenever image_data was present, which bypassed the template system. Reverted to the template-driven contract: default templates unchanged, opt-in by editing the template body to include {finish_photo_url}. 2) user_print_* template name disambiguation. The four user_print_* templates are the per-user SMTP emails sent to the print's submitter (advanced-auth-only path). They shared the "Print Completed" / "Print Failed" / etc. short names with the broadcast provider templates, so the Message Templates list was indistinguishable. The EVENT_NAMES display map in routes/notification_templates.py already used the disambiguated "… Email" labels, but the seed wrote the short name to the DB. DEFAULT_TEMPLATES now seeds the four user_print_* rows with " Email" suffix so fresh installs are correctly labelled. New _migrate_rename_user_print_template_names runs on startup and updates existing rows where the name still matches the old default. Admin-edited names are preserved. Standard SQL UPDATE works on both SQLite and Postgres without dialect branching. |
||
|
maziggy
|
9d74f9281b |
feat(deficit): backup-aware filament deficit check, colour-strict (#1762)
When the printer reports ams_filament_backup=True, compute_deficit_for_queue_item pools remaining_grams across spools matching (preset, colour) on the same printer (scoped per extruder on dual-nozzle) before declaring a per-slot shortfall. Identity is strict: same slicer_filament preset AND same colour (alpha-normalised). Two PETG HF spools in different colours are NOT pooled — the firmware would swap correctly but the print would change colour mid-run. Spoolman side mirrors the rule via filament.id + color_hex. Backup OFF falls back to the pre-PR per-slot accounting line-for-line. 8 new test cases in TestFilamentDeficitBackupAware pin pool covers, pool insufficient, different presets, backup-OFF regression, dual- extruder side scoping, no-preset never pairs, colour-strict, and alpha-hex normalisation. The 8 pre-existing test_filament_deficit.py cases stay green. feat(printers): AMS Filament Backup modal with BS-style ring per pair Badge click on the Filaments section header (#1766) now opens a modal: filament-colour ring per backup pair, material name + rotation count in the centre, slot labels distributed around the colour band on contrast-aware pills. Closely modelled on Bambu Studio's Auto Refill widget. Lone slots are intentionally not listed. R / L badges per ring when the extruder map carries two distinct values; collapses to no- badge rendering for single-nozzle printers misflagged as dual. Esc keypress closes the modal. Theme-aware via CSS variables matching AMSHistoryModal. computeBackupGroups helper in utils/amsHelpers defensively dedupes duplicate ams.id entries observed on switch-VP aggregations. 10 modal render cases pin: Esc closes / unmount nulls the listener / ring renders for pairs and omits lone slots / R-L badges only when extruder map has distinct values / empty state / toggle gating. 13 frontend cases pin computeBackupGroups identity rules. feat(printers): active-print P-N pill on AMS slot tiles during RUNNING While the printer is mid-print, each AMS slot tile referenced by status.ams_mapping carries a small "P1 / P2 / P3" pill in the top- right corner, naming which print-slot is mapped to that AMS slot. Catches the #1762 comment-2 scenario: a queue job set for "any X1C" staged to a printer with mismatched filament, no way to verify mid- print. Same wire data (status.ams_mapping is already on the wire) — the addition is purely surface. The existing ring-bambu-green highlight for effectiveTrayNow keeps its meaning (currently extruding RIGHT NOW); the pill is the per-slot static assignment for the active print. chore(scheduler): log Print Anyway short-circuit at INFO _block_on_filament_deficit logs at INFO when it honours item.skip_filament_check, so a future "Print Anyway didn't work" report (third commenter on #1762 hit this shape) has actionable evidence in the standard support bundle without DEBUG. Bundled because the deficit fix makes the original symptom disappear for users with backup ON. |
||
|
maziggy
|
4206d675eb |
feat(notifications): dedicate AI Failure Detection notification event (#1794)
Split Obico failure-detection dispatch out of the multiplexed
on_printer_error event onto its own on_ai_failure_detection event so
users can subscribe to AI alerts without also enabling HMS hardware-
error pages, and so the discoverable label "AI Failure Detection" is
what subscribes them rather than the unrelated "Printer Error" toggle.
New column on notification_providers (default False, branched
SQLite/Postgres migration), new notification_service.on_ai_failure_detection
method, new ai_failure_detection template, obico_actions._notify swap.
Frontend gets a summary badge, a toggle row with description, and ntfy
priority surfacing. 14 new tests pin the routing + the regression guard
("Printer Error" alone must NOT receive AI notifications now). 11 locales
covered.
Existing providers keep working: HMS hardware errors continue to ride
on_printer_error unchanged; users who want spaghetti alerts opt in via
the new toggle.
|
||
|
maziggy
|
166e9f9ef2 |
fix(vp): correct #1780 root cause — VP intake key mismatch dropped every slicer field
First-attempt fix ( |
||
|
maziggy
|
68b9d741d9 |
feat(humidity): per-filament humidity threshold for auto-drying + alarms (#1605)
Reporter @thenewguy runs an engineering farm with one AMS per material
(PLA, ASA, Nylon, PVB, HIPS) — Bambuddy's single global ams_humidity_fair
threshold (default 60%) was driving both the queue / ambient auto-drying
trigger AND the hourly humidity alarm uniformly, which is wrong for
multi-material setups where Nylon wants <10% and PLA is fine at 60%.
Drying RUN parameters were already per-filament via drying_presets;
this commit adds the missing per-filament TRIGGER.
New setting ams_humidity_thresholds — JSON map of filament-type to
threshold percent with a "default" key for unknown / unmapped types.
Empty / unset → both consumers fall back to ams_humidity_fair so the
upgrade is silent.
Resolver lives in PrintScheduler.resolve_humidity_threshold(trays,
thresholds, fallback) — picks the lowest (most-restrictive) threshold
across all loaded tray types, matching the conservative-params strategy
_get_conservative_drying_params already uses for temp / hours. Empty
tray slots contribute no constraint; all-empty AMS falls through to the
"default" key. Filament names normalized to uppercase base (so
"PLA Basic" / "pla basic" both map to PLA).
Two consumer sites rewired through the same resolver so the scheduler
and the alarm path can never disagree about whether an AMS is "too
humid":
- print_scheduler.py::_check_auto_drying — per-AMS humidity comparison
for start / stop / skip decisions.
- main.py AMS sensor / alarm worker — hourly humidity alarm notifier.
UI: new table in Settings → Workflow → Auto-Drying, below the existing
Drying Presets table. Default row + 8 default filament types
(PLA / PETG / TPU / ABS / ASA / PA / PC / PVA) pre-filled from the
current ams_humidity_fair value so the editor starts sensibly.
Input pattern: draft-on-edit / commit-on-blur (transient humidityDrafts
state per row). onChange only updates the draft; onBlur (and Enter)
parses + clamps to [5, 95] + commits. Empty value on blur clears the
override and falls back to default. Caught mid-PR via a typing test:
the naive per-keystroke clamp snapped "3" → 5 before the user could
type the second digit of "30".
Setting is in the public _UI_PREFERENCE_FIELDS allowlist (same rationale
as drying_presets and ams_humidity_fair — non-sensitive integer map,
no SETTINGS_READ permission required for badge-color rendering).
|
||
|
maziggy
|
a5fe5cb3d4 |
feat(sponsor-prompt): in-app toast at earned milestones
ghcr.io pull baseline (~10k/day rising → ~8-12k active installs) puts
sponsor conversion at 0.08% — roughly an order of magnitude under
industry-benchmark for OSS with visible CTA. The Settings banner from
|
||
|
maziggy
|
a53dc20ca3 |
fix(usage-tracker): split mid-print AMS-Backup spool switch correctly (#1771)
Reporter forcefully started a print needing ~260 g with 180 g on the
first spool and a backup spool in the AMS. Printer correctly consumed
spool 1, AMS Backup switched, spool 2 finished the print. Bambuddy
attributed all 260 g to spool 2 -- spool 1 untouched in inventory.
Two stacking bugs produced the exact "all to second spool" symptom for
prints without per-layer 3MF gcode data:
1. bambu_mqtt.py:2135 wrote state.total_layers = int(data["total_layer_num"])
unconditionally. P1S firmware pushes total_layer_num=0 at print end
(same reset pattern other models do for layer_num / progress). The
unconditional write clobbered the slicer's actual total to 0 before
the usage tracker read it.
2. usage_tracker.py:1129-1137 linear-fallback dumped EVERYTHING onto the
last segment when total_layers was 0:
if total_layers > 0:
segment_grams = total_weight * (seg_end_layer - seg_start_layer) / total_layers
else:
segment_grams = 0.0 # <- entire print weight ends up on last segment
Path 2 (AMS remain% delta) couldn't recover because (a) the emptied
spool reported remain=-1 and (b) Bug-A had already added the second
spool's key to handled_trays, suppressing the Path 2 lookup.
Fix:
- bambu_mqtt.py: only overwrite state.total_layers when the incoming
value is positive (mirror of the existing _last_valid_layer_num
pattern at line 2127). Explicit reset on new print start at
_handle_print_start so the previous print's total can't bleed in.
- usage_tracker.py: cascade the linear-fallback denominator -
state.total_layers, then last_layer_num (already threaded in for
the last_progress fallback), then equal-split as a bounded fence.
Equal-split is still wrong but never dumps the whole print on the
last segment, which was strictly worse.
|
||
|
maziggy
|
b1cb26f6ee |
feat(ams-backup): add status badge + toggle, fix prefer-lowest (#1766)
Two tightly-coupled deliverables in one drop -- a new AMS Filament Backup status/control surface, and the #1766 fix that depends on it. Added -- AMS Filament Backup status + control - Parse bit 18 of top-level print.cfg into PrinterState.ams_filament_backup on every push_status. Verified against OrcaSlicer source (DeviceManager.cpp:4961) and a live H2D ON/OFF capture. Tri-state (None = A1 family / pre-cfg push) preserves today's behaviour. - Hold-timer guard (3 s) prevents stale frames from flickering the badge back to the printer's old cfg after a user-initiated toggle. - POST /printers/{id}/ams-backup toggle, set_ams_filament_backup() client method calling _set_print_option("auto_switch_filament", enabled). - GET /printers/{id}/inventory-remain endpoint exposes the same map the dispatcher uses (internal and Spoolman modes both work uniformly). - Small icon badge in the printer card's "Filaments" section header (placement reads as printer-wide because the cfg bit is printer-wide, not per-AMS). Click to toggle, success toast. - 5 i18n keys x 11 locales for the badge UI. Fixed -- #1766: prefer_lowest didn't pick lowest, ignored backup state - Backend gate in _compute_ams_mapping_for_printer: coerce prefer_lowest to False when status.ams_filament_backup is False; log the skip. - New effectivePreferLowest(setting, backup) helper applied at every frontend sort entry point: single-printer PrintModal, multi-printer hook per-printer, PrinterSelector InlineMappingEditor, FilamentMapping standalone editor (the last had NO preferLowest awareness at all before this change). - New preferLowestSortKey(f, inventoryByTrayId) mirrors backend's two-tier key exactly, including the banding tie-break (regular AMS < AMS-HT < external) so the client-side pre-compute matches the dispatch-time pick. An earlier draft used a flat `amsId * 4 + trayId` priority which gave external slots (ams_id = -1) a NEGATIVE priority -- caught in code review before commit. - Settings -> Filament -> "Prefer lowest remaining filament" gets an explanatory note about the printer-side AMS Backup dependency, with i18n key in all 11 locales. |
||
|
maziggy
|
d196cfc500 |
fix(virtual-printer): forward H2C rack-swap nozzle pick from slicer to dispatch (#1780)
BambuStudio's project_file MQTT command for O1C2 (the H2C dual- nozzle-rack variant) carries nozzle_mapping (per-filament physical nozzle position IDs) and nozzles_info (per-extruder rack metadata). The VP intake was dropping both, so the H2C firmware fell back to "last matching nozzle type" auto-pick and ignored the user's slicer choice — every HF print landed on R2, every standard print landed on R4. Carry both fields through the VP intake → queue item → MQTT dispatch path. New nullable TEXT columns on print_queue, non- branched ALTER (matches ams_mapping / filament_overrides precedent). Dual-nozzle gate at start_print() keeps the fields off single-nozzle dispatches. Fail-open on malformed JSON — firmware auto-picks, never worse than pre-fix. Stamps both fields on every plate in the multi-plate Send All loop (#1697 / #1188 precedent). ams_mapping2 still handles H2D/X2D dual-extruder routing unchanged; this fix is scoped to the O1C2 rack-swap mechanism. |
||
|
phieb
|
b414af6b1c | feat(gcode-injection): per-VP opt-in auto-print injection toggle (#1516) (#1656) | ||
|
maziggy
|
3ef5119b7d |
fix(archives): render plate thumbnails server-side when sidecar slice skips them (#1759)
Bambuddy's archive cards were blank for every print sliced through the BS or Orca docker sidecars. The "Some recent prints couldn't be archived with thumbnails" banner pointed at install step 4 which is unrelated — that flag only fires on FTP-fetch failures, not on missing-thumb in the sliced 3MF. Root cause is upstream of Bambuddy: neither slicer CLI renders Metadata/plate_N.png when invoked headlessly with --slice --export-3mf. That render is a separate code path triggered by --export-png, which is mutually exclusive with --export-3mf and additionally needs a working display backend (BS 02.07.x's bundled GLFW is hard-locked to Wayland — even XDG_SESSION_TYPE=x11 + GDK_BACKEND=x11 + QT_QPA_PLATFORM=xcb don't switch it back). An Xvfb display in the sidecar wouldn't help even if we wired the second-pass call. The Orca sidecar has been silently shipping thumbnail-less 3MFs from STL inputs since launch; nobody noticed. Fill the gap on the Bambuddy side: new plate_thumbnail.py renders the missing thumbnails after the slice returns. inject_plate_thumbnails_if_missing parses the sliced zip, finds every Metadata/plate_N.gcode entry that doesn't have a matching plate_N.png, loads 3D/3dmodel.model via trimesh, renders an isometric Bambu-green-on-dark view at 512x512 + 128x128 via the same matplotlib Agg pipeline as stl_thumbnail.py, and re-packs the zip with the PNGs injected. Visual style matches Bambuddy's existing library thumbnails — archive cards stay consistent inside Bambuddy rather than chasing parity with desktop Studio's plate render. Best-effort: input bytes are returned unchanged on any failure so the slice flow itself can never fail because of a missing thumbnail. Idempotent: re-running on an already-injected 3MF returns the input verbatim. Wired into both library.py slice paths via result._replace; covers the cross-class merged-multi-plate path automatically (merged bytes flow into the same write site). No sidecar Dockerfile change required — an earlier attempt to install Xvfb in Dockerfile.bambu-studio was a false start and is not part of this drop. Dependencies: trimesh's 3MF loader uses networkx (scene-graph traversal) and lxml (model.xml parse) lazily inside the 3MF code path — both added to requirements.txt because they aren't strict trimesh transitives. |
||
|
Ed
|
0f99b54d7e | feat: Update printer card UI for structure and readability (#1661) | ||
|
maziggy
|
9d1f04b89d |
log(scheduler): emit prefer-lowest dispatch decision at INFO so #1766 can be triaged from a bundle
The matcher's tray_info_idx vs color vs type_only bucket choice was debug-only, so a bug report's bundle never showed which path won. Emit the sorted candidate trays and the picked bucket per filament req when prefer_lowest=True. Behaviour-neutral; existing 89 matcher tests pass. |
||
|
Poltavtcev
|
af5d24e289 | feat(inventory): structured storage locations catalog (#1505) | ||
|
maziggy
|
2cf6f29503 |
fix(vp): Send All enqueues one item per plate; archive delete cascades to queue
VP queue-mode multi-plate Send All
==========================================
BambuStudio / OrcaSlicer "Send All" of a multi-plate project uploads ONE
3MF containing every plate (one FTP STOR, single filename) — slice_info.config
inside the file lists N <plate> blocks with their own index metadata and
their own Metadata/plate_N.gcode payload. Pre-#1733 the VP queue path
called _extract_plate_id which returned only the FIRST plate index, and
_add_to_print_queue built exactly one PrintQueueItem from it. Plates 2..N
silently dropped on the floor. From the user's perspective: Send All of a
3-plate project produced 1 queue item, indistinguishable from a regular
single-plate Send, with no log line to explain the discrepancy.
The wire was confirmed against the live H2D-1 Proxy VP: the same file
ships whether the user clicked Send or Send All; the only intent signal
is the count of <plate> blocks inside slice_info.config.
Fix: replaced _extract_plate_id (-> int | None) with _extract_plate_ids
(-> list[int]). The list contains every <plate> block's index in order;
falls back to [1] when slice_info.config is missing / unparseable so the
single-plate case is preserved. _add_to_print_queue now loops over the
list and creates one PrintQueueItem per plate, with:
- plate-specific position = MAX(position) + iteration_number, so the
items inherit consecutive positions and the slicer's plate order
becomes the queue execution order.
- per-plate required_filament_types / filament_overrides via
extract_filament_requirements(file_path, plate_id) — the plate-aware
filter shipped with #1697 — so the scheduler's per-printer "Any X"
matching dispatches each plate onto a printer with the right
colours loaded for THAT plate, not for plate 1's filament set.
- shared archive_id across all plates (one upload = one archive row).
- the VP's auto_dispatch + manual_start posture inherited unchanged.
Net behaviour: single-plate Send hits the loop once → exactly today's
result (one queue item, plate_id from the slicer, one archive). Multi-
plate Send All of a 3-plate file → 3 queue items, plate_id 1/2/3,
consecutive positions, all referencing the same backing archive.
Archive delete cascades to queue rows
=============================================
Previously the soft-delete path (the default the trash-can button uses)
called _cancel_pending_queue_items which only flipped queue rows with
status='pending' to status='cancelled' while leaving every other status
alone AND leaving every row in the DB. The Send All multi-plate work
above made this much more visible: deleting an archive backed by N
queue items now had to clean up N rows, and what users saw instead was
N "cancelled" rows lingering in the queue history.
Backend:
- Replaced _cancel_pending_queue_items with _delete_related_queue_items
(db, archive_id) -> int. DELETEs every queue row where
archive_id = X regardless of status. Matches what the hard-delete
path already did via the ON DELETE CASCADE FK on
print_queue.archive_id — both paths now produce the same end state.
- Print history lives in PrintLogEntry (FK ON DELETE SET NULL) and is
untouched; Quick Stats / accuracy bands are preserved across both
delete paths.
- 409 guard on archives.py::delete_archive when any related queue
item is currently status='printing'. Both soft and hard delete are
gated; deleting the archive while a print is live would strip the
dispatcher's metadata trail (filament / plate / ams_mapping) out
from under the running print.
- New GET /archives/{id}/delete-impact endpoint returns
{related_queue_items: N, currently_printing: M}. Cheap, single
endpoint, deliberately NOT folded into the archive list response
so the much larger list endpoint isn't forced to run the same
query per row.
Frontend:
- ArchivesPage delete-confirm modal queries the new endpoint when the
modal opens (useQuery with enabled: showDeleteConfirm) and renders
an amber "N queue items linked to this archive will also be removed"
line when total > 0 AND printing = 0, OR a red "Cannot delete —
M queue items are currently printing" line when printing > 0
(confirm button disabled in that case so the user can't bonk the
409 on submit).
- ConfirmModal gained an optional confirmDisabled?: boolean prop —
isLoading was the only disable knob before; this adds the external-
precondition path.
- 2 new i18n keys (deleteQueueItemsWarning, deleteBlockedByPrinting)
translated across all 11 locales per feedback_translate_dont_fallback —
no English fallbacks.
No DB migration — the CASCADE FK was already in place; only the helper's
semantics changed.
|
||
|
maziggy
|
be7e85344c |
fix(finish-photo): drive capture from stg_cur=22, drop dispatch force-on (#1721)
capture_finish_photo (default-on) was forcing the timelapse MQTT field to true on every print, even when the user explicitly unchecked Timelapse in the slicer send dialog. On profiles with Timelapse Type = Smooth, that flipped the printer's timelapse_record_flag and un-gated the per-layer M622 J1 wipe blocks the slicer had baked in — toolhead parked off the part every layer, on prints the user opted out of recording. Root cause: #1397 implemented the finish-photo feature as a side channel of "force the printer into timelapse-recording mode at dispatch" so the last-frame extractor had a video to pull from. That conflated recording a timelapse with snapping a finish photo, and the per-layer side effects were decided at slice time by the user's timelapse_type, which Bambuddy has no visibility into post-slice. Fix: replace the force-on with a clean MQTT-state-driven trigger. bambu_mqtt.py fires a new on_finish_photo_moment callback when stg_cur transitions INTO 22 ("Filament unloading") while _was_running AND end-of-print gate matches (progress >= 99 OR layer_num >= total_layers OR remaining_time <= 0). The gate disambiguates from mid-print color swaps (which also transit stage 22 but at progress < 99). FINISH-state fallback in the same handler fires the callback at the existing transition if stage 22 never arrived (cancel, external-spool-only, HMS halt, firmware variants). main.py registers on_finish_photo_moment as a top-level handler. It pre-captures one camera frame at the trigger edge (external cam → buffered RTSP → fresh RTSP via capture_camera_frame_bytes) and caches the JPEG bytes in _stage22_finish_frames[printer_id]. _background_finish_photo consumes the cached bytes before its existing live-grab chain, so the saved photo has the better framing (toolhead parked, before bed drop) without restructuring the archive-resolution / fallback / notification wiring. When a timelapse IS actively recording (user explicitly opted in), pre-capture is skipped — _capture_finish_photo_from_timelapse still extracts the last frame, which is still the best framing and now has no force-on side effects because the user wanted the video. Removed: resolve_effective_timelapse, _resolve_effective_timelapse wrapper, both background_dispatch call sites, the print_scheduler call site, the archive.bambuddy_forced_timelapse write, _cleanup_forced_timelapse (~75 lines including the FTP-DELE walk across /timelapse, /timelapse/video, /record, /recording) and its call site. All paths now read bool(item.timelapse) / bool(job.options.get("timelapse", False)) directly. The archive.bambuddy_forced_timelapse DB column stays defined (default False) for back-compat with existing rows — no consumer reads it anymore. |
||
|
maziggy
|
43adb6f964 | Security hardening (security #2) |