mirror of
https://github.com/maziggy/bambuddy.git
synced 2026-10-05 13:41:36 +02:00
52448a374e71cdad86e35dca445aad63eb3db3c0
22
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 maziggy
|
be7e85344c |
fix(finish-photo): drive capture from stg_cur=22, drop dispatch force-on (#1721)
capture_finish_photo (default-on) was forcing the timelapse MQTT field to true on every print, even when the user explicitly unchecked Timelapse in the slicer send dialog. On profiles with Timelapse Type = Smooth, that flipped the printer's timelapse_record_flag and un-gated the per-layer M622 J1 wipe blocks the slicer had baked in — toolhead parked off the part every layer, on prints the user opted out of recording. Root cause: #1397 implemented the finish-photo feature as a side channel of "force the printer into timelapse-recording mode at dispatch" so the last-frame extractor had a video to pull from. That conflated recording a timelapse with snapping a finish photo, and the per-layer side effects were decided at slice time by the user's timelapse_type, which Bambuddy has no visibility into post-slice. Fix: replace the force-on with a clean MQTT-state-driven trigger. bambu_mqtt.py fires a new on_finish_photo_moment callback when stg_cur transitions INTO 22 ("Filament unloading") while _was_running AND end-of-print gate matches (progress >= 99 OR layer_num >= total_layers OR remaining_time <= 0). The gate disambiguates from mid-print color swaps (which also transit stage 22 but at progress < 99). FINISH-state fallback in the same handler fires the callback at the existing transition if stage 22 never arrived (cancel, external-spool-only, HMS halt, firmware variants). main.py registers on_finish_photo_moment as a top-level handler. It pre-captures one camera frame at the trigger edge (external cam → buffered RTSP → fresh RTSP via capture_camera_frame_bytes) and caches the JPEG bytes in _stage22_finish_frames[printer_id]. _background_finish_photo consumes the cached bytes before its existing live-grab chain, so the saved photo has the better framing (toolhead parked, before bed drop) without restructuring the archive-resolution / fallback / notification wiring. When a timelapse IS actively recording (user explicitly opted in), pre-capture is skipped — _capture_finish_photo_from_timelapse still extracts the last frame, which is still the best framing and now has no force-on side effects because the user wanted the video. Removed: resolve_effective_timelapse, _resolve_effective_timelapse wrapper, both background_dispatch call sites, the print_scheduler call site, the archive.bambuddy_forced_timelapse write, _cleanup_forced_timelapse (~75 lines including the FTP-DELE walk across /timelapse, /timelapse/video, /record, /recording) and its call site. All paths now read bool(item.timelapse) / bool(job.options.get("timelapse", False)) directly. The archive.bambuddy_forced_timelapse DB column stays defined (default False) for back-compat with existing rows — no consumer reads it anymore. |
||
|
maziggy
|
72044e3a53 |
fix(usage): scope 3MF filament tracking to dispatched plate (#1697)
When a print targets a single plate from a multi-plate 3MF, both the
internal Filament Inventory tracker and the Spoolman-mode tracker parsed
the 3MF without a plate filter and summed every plate's filament — so a
single lid print debited the spool the entire file's grey + black totals.
The 3MF parser already supports plate_id (queue pre-flight uses it at
print_queue.py:254/:286). Plumbed it through both dispatch paths:
Queue path:
- PrintSession gains a plate_id field; on_print_start queries the
printer's currently-printing queue row and records queue_item.plate_id
onto the session.
- _track_from_3mf accepts plate_id and passes it to the extractor.
- store_print_data moves its existing queue-item lookup above the
extract and uses queue_item.plate_id as the plate filter.
Direct-Print path (reprintArchive / printLibraryFile — never goes
through the queue):
- _print_plate_ids dict added in main.py, parallel to _print_ams_mappings.
- register_expected_print accepts plate_id and stores it; the 2 sites in
background_dispatch.py and the 1 site in print_scheduler.py now pass
it (resolve was already happening, just needed reordering before the
register call so the value is available).
- Expected-print promotion in main.py injects _print_plate_ids[archive_id]
into the session, guarded so a queue capture wins over the dict.
- _get_start_plate_id helper feeds plate_id into all 3
_store_spoolman_print_data call sites; spoolman_tracking.store_print_data
takes the caller value first, falls back to queue_item.plate_id.
PrintArchive.filament_used_grams stays file-level summed by design
(#1593's contract — the archive describes the file, not the run); only
the per-run usage attribution becomes plate-aware. Single-plate direct
prints resolve to plate_id=1 → plate 1 = whole file, identical to the
prior no-filter behaviour.
|
||
|
maziggy
|
2c2725cb53 |
fix(print): expose nozzle_offset_cali toggle for dual-nozzle printers (#1682)
Bambuddy's project_file MQTT payload hardcoded "nozzle_offset_cali": 2 (skip), giving users on H2D / H2D Pro / H2C / X2D no way to control the same toggle BambuStudio exposes. Critical for diamond-nozzle setups that must keep the calibration off. start_print() now takes a nozzle_offset_cali kwarg; the value is encoded as 1 (run) or 2 (skip) and gated on is_dual_nozzle so single-nozzle machines always send 2 even if a stale flag arrives. The kwarg threads through printer_manager, both background_dispatch sites, and print_scheduler so every dispatch path respects the per-item setting. print_queue gains a nozzle_offset_cali column (DEFAULT TRUE, is_sqlite() branch for Postgres BOOLEAN). Settings default key default_nozzle_offset_cali defaults to TRUE to match BambuStudio. Schemas updated across print_queue, library FilePrintRequest, archive ReprintRequest, settings. PrintModal renders the new toggle only when the selected printer is dual- nozzle (printer-mode: nozzle_count===2; model-mode: DUAL_NOZZLE_MODELS). SettingsPage default-print-options row + QueuePage bulk-edit tri-state both hide unless any registered printer is dual-nozzle. Labels reuse the existing settings.default* keys so the only new i18n strings are settings.defaultNozzleOffsetCali / Desc and queue.bulkEdit.nozzleOffsetCali - real translations in all 11 locales. |
||
|
maziggy
|
f243e4e598 |
fix(asyncio): track strong refs on orphan create_task sites
asyncio holds only a weak reference to tasks returned by ``create_task``. Fire-and-forget callers that discard the return value let the event loop GC the task before it finishes, logging ``Task was destroyed but it is pending!`` with no traceback. The #1648 support-bundle review surfaced 94 such warnings in 8 days of v0.2.4.5 -- the silently-vanished exceptions reach support bundles as opaque GC notices instead of actionable errors. New backend/app/core/tasks.py::spawn_background_task(coro, *, name=None) is the one place in the codebase that calls asyncio.create_task. It stores the task in a module-level set, attaches a done-callback that auto-removes on completion AND surfaces any uncaught exception via the logger with the originating traceback, and accepts name= so a leak source is traceable through /tracebacks and the log line. Cancelled tasks don't log (a shutting-down service is not an error). Migrated the 16 truly-orphan create_task call sites to the helper: main.py (8): reconcile-stale, cooldown-poweroff, energy calc, smart-plug, maintenance-check, photo-then-notify, layer-timelapse, scan-timelapse, print-scheduler, notify-no-archive (the last one was hand-rolling the same pattern with task + no-op done_callback) printers.py:3123 apply-pa-after-refresh print_queue.py:1034 queue cooldown-poweroff firmware_update.py:261 firmware upload archive.py:1514 timelapse mp4 convert print_scheduler.py:2199 watchdog print-start library.py:1614 STL backfill smart_plugs.py:259 tasmota scan discovery.py:159 subnet scan smart_plug_manager.py x3 plug auto-off-pending background_dispatch.py x2 (lambda-wrapped inside loop.call_soon_threadsafe) upload progress Sites that already kept strong refs are unchanged: self._tasks.append(asyncio.create_task(...)) -- VP manager, tcp_proxy, mqtt_server self._x_task = asyncio.create_task(...) on service instances -- mqtt_bridge, obico_detection, github_backup, archive_purge, local_backup, library_trash, discovery service Locally assigned + awaited/gathered -- tcp_proxy bidirectional pumps, camera_fanout, slice_dispatch, slicer_api progress_task, manager._finish_release_task, main.py module-level cleanup loops |
||
|
maziggy
|
12d17bfbe7 |
fix(photo): source finish photo from forced timelapse + cleanup (#1397)
Bambu's end-gcode lowers the bed at gcode_state=FINISH. Bambuddy's live-camera grab captured the bed already dropped, ruining the photo framing. Source the photo from a brief Bambu timelapse instead — firmware stops timelapse recording AFTER toolhead parks but BEFORE bed-drop runs, so the last frame frames the finished print correctly. When capture_finish_photo is on AND the user did not opt in to timelapse for this print, force timelapse=True at dispatch + mark the new PrintArchive.bambuddy_forced_timelapse column. After extraction (success or failure), cleanup deletes the locally-attached file, clears archive.timelapse_path, and walks the four scanner directories (/timelapse, /timelapse/video, /record, /recording) trying FTP DELE against the original filename. User-opted-in timelapses pass through unchanged. Resolver lives at services/background_dispatch.py::resolve_effective_timelapse (module-level so the print queue can reuse it). Both dispatch paths wired: background_dispatch.py (Print Now / Reprint) AND print_scheduler.py:_start_print (the queue). Field testing caught the scheduler gap on the first round — AST regression test now asserts start_print(timelapse=...) references effective_timelapse, not the raw item.timelapse, so a future refactor can't silently drop it. Extractor: ffmpeg -i input.mp4 -update 1 -q:v 2 out.jpg. Decoded frames overwrite the same output file, so the file left on disk is the literal last frame regardless of duration. Bambu records one frame per layer-change, so a 16-layer cube produces a 0.6 s timelapse — the original -sseof -1.0 approach seeked before the start of the file and returned frame 0 (empty bed). Decoding every frame is fine; Bambu timelapses are short by construction even on hours-long prints. Migration adds bambuddy_forced_timelapse branched on is_sqlite() (DEFAULT 0 / DEFAULT FALSE — PG rejects DEFAULT 0 for BOOLEAN). Verified live on postgres:16-alpine. Photo-task wait_for budget extends 45s -> 75s when timelapse_was_active so the notification carries the bed-up photo instead of falling back to the live-cam grab on slow links. Scope limit, documented in the camera wiki: prints started directly on the printer touchscreen / Bambu Handy / Bambu Studio Send bypass both dispatch paths, so the override doesn't fire there. Future option: mid-print M981 S1 P20000 MQTT toggle in on_print_start. Setting description rewritten in all 11 locales to drop the "only works when timelapse enabled" caveat (Bambuddy now forces it) and explain the kept-or-deleted behaviour. |
||
|
maziggy
|
6d316c5593 |
fix(dispatch): align SD cleanup with upload path so doubled-extension library rows don't leave ghost prints (#1542)
A library row with archive.filename "Cube (1).gcode.3mf.gcode.3mf" uploaded
to /Cube_(1).gcode.3mf.3mf (single-iteration strip + append). Post-print
cleanup looked at /Cube_(1).3mf and /Cube_(1).gcode (subtask_name + ext),
missed the on-card file, and A1 firmware re-ran it on next power-on.
- New derive_remote_filename() helper in backend/app/utils/filename.py:
iterative strip of .gcode.3mf/.3mf suffixes, append single .3mf,
space->underscore. isinstance() guard raises TypeError on non-str
input rather than entering the strip loop with a duck-typed
object that returns truthy sentinels from endswith.
- Three previously-duplicated upload sites (background_dispatch reprint +
library, print_scheduler queue) now share the helper.
- SD cleanup fetches archive.filename and tries the derived path first,
with the legacy subtask_name + ext paths kept as fallbacks.
- 10 new unit tests pin the reproducer + edge cases (doubled .gcode.3mf,
doubled .3mf, raw .gcode preserved, idempotence, Unicode, plus the
type guard against MagicMock / None / int inputs).
|
||
|
maziggy
|
173edd9b7c |
● fix(vp-queue): inherit slicer print options instead of always using defaults (#1403)
Reporter sliced in OrcaSlicer with timelapse on, sent the job to a VP queue, started from the queue, and got no timelapse video. Their dispatch chain itself was correct (queue item -> scheduler -> MQTT command honors `timelapse`); the gap was at queue-add time. The VP's `_add_to_print_queue` reads `default_timelapse` (and the four other print-option settings) from the workflow settings card. That was introduced in #1235 to stop column-level defaults from winning. But it also discarded the slicer's actual choice carried on the MQTT `project_file` command, which all the slicers (Studio / Handy / Orca) ship as `timelapse: true|1`. Result: a user with the new-install value `default_timelapse=false` had to either flip the global setting or edit every queue item by hand, even though their slicer's "Print options" UI clearly said "record timelapse". Investigation went wider than #1403 because Martin's hypothesis was "the print options modal isn't respected either." Cross-checking 86 captured P1S `project_file` commands across the support packages shows 46 from the queue scheduler and 33 from background_dispatch emitting `"timelapse": true` correctly to real printers - the modal + re-print path is intact end-to-end. The slicer-side gap was the only real bug. Two unrelated dead-code issues turned up in the same dig and are folded in below. Fix (VP queue inheritance) - `on_print_command` in the VP manager now stashes the slicer's project_file dict keyed by filename, then signals an asyncio.Event. - `_add_to_print_queue` checks the dict first; if empty, creates the event and waits up to 2 s for it before reading the settings fallback. Each option flows through per-field - slicer value wins if present, else the existing settings default (so users who explicitly set `default_timelapse=true` in their VP workflow card still get that on slicers that don't send a print command). - MQTT field naming preserved exactly: `bed_leveling` (single L) on the wire stays mapped to `bed_levelling` (double L) on the Bambuddy column. Integer 0/1 from H-family slicers and bool true/false from P1/X1 slicers both coerce via `bool()`. - Capture is gated on `mode == "print_queue"` so immediate / review / proxy modes keep their pre-fix no-op `on_print_command` and don't accumulate stashed entries over the VP's uptime. - Wait is also skipped when there's no MQTT server attached (`self._mqtt is None`), so unit tests that invoke `_add_to_print_queue` directly don't pay the 2 s tax. - Capture is consumed on use so the dict stays bounded. - `printer_manager.get_status(...).get(...)` against a `PrinterState` dataclass that has no `.get()` method. - Every print option discarded (timelapse, bed_levelling, AMS mapping). The route 500'd before ever reaching the printer. Rewritten to mirror `POST /print-queue/{item_id}/start`: clear `manual_start=False` on the next pending queue item and let the scheduler dispatch with the queue's stored options intact. Response shape preserved. Side-bug b: vibration_cali default drift in background_dispatch - `ReprintRequest.vibration_cali` and `FilePrintRequest.vibration_cali` both default to `True` (matches Bambu Studio behavior for X1/P1). - Both `_process_job` call sites read `job.options.get("vibration_cali", False)`. Cosmetic today because the frontend always sends the field, but a latent landmine for any future caller that bypasses the schema. Both sites flipped to `True`. |
||
|
maziggy
|
5680f5d34b |
fix(scheduler): watchdogs no longer falsely treat FINISH->IDLE as "print landed" (#1370)
Both the queue-side _watchdog_print_start and the direct-dispatch _verify_print_response used `status.state != pre_state` to decide whether a project_file command had been accepted. When a printer was in FINISH at dispatch time (un-dismissed post-print prompt from a prior job), the firmware silently rejected the new command; if the user then dismissed the screen prompt, the printer moved FINISH -> IDLE and the watchdog returned early as "command landed" — leaving the queue row stuck at status='printing' indefinitely and the scheduler permanently marking the printer as busy. Narrow the "command landed" check in both verifiers to an allow-list of active-print states (PREPARE / SLICING / RUNNING / PAUSE). Inactive transitions (FINISH -> IDLE, etc.) no longer short-circuit the revert. The subtask_id-advance signal stays in place for H2D's slow FINISH -> PREPARE transition (#1078). Also wrap _watchdog_print_start's revert commit and printer_manager._persist_awaiting_plate_clear in run_with_retry so SQLite single-writer contention can't silently drop these writes. The revert path returns a tristate sentinel so the post-revert MQTT session-recovery logic only runs when we actually reverted (or the commit failed) — not when on_print_complete had already cleared the row, where a forced reconnect could break a healthy concurrent print. |
||
|
maziggy
|
889c8bd87f |
fix(printers): show correct plate thumbnail on multi-plate 3MFs (#1166)
P1S 01.10.00.00 (and similar firmware revisions) only echo the .3mf
filename in print.gcode_file, dropping the Metadata/plate_N.gcode path.
The /cover route's regex falls back to plate 1 — and the printer card
shows the wrong plate's thumbnail on multi-plate prints.
Resolution order in the new resolve_plate_id() helper (used by both
the status route's current_plate_id and /cover):
1. The plate Bambuddy dispatched. start_print() now records
(dispatched_plate_id, dispatched_subtask) on PrinterState; the
subtask check rejects stale records from a previous Bambuddy
dispatch bleeding into a Studio-direct print on the same project.
2. plate_(\d+)\.gcode regex on state.gcode_file (existing behaviour
for firmware that does include the path).
3. After download, scan the 3MF for a unique Metadata/plate_*.gcode —
covers per-plate archives sliced separately in Studio without a
Bambuddy dispatch record.
4. Default to plate 1.
Cover-byte cache key simplified to (subtask_name, view_key) now that
plate resolution is late-bound. clear_cover_cache() already fires on
every print start, so re-dispatches with a different plate always
fetch a fresh thumbnail.
Bambuddy-dispatched prints additionally register the local archive
3MF in the cover cache at dispatch time, so /cover reads straight
from the archive directory and doesn't refetch the file over FTP
from a printer whose FTP server is busy serving the active print.
Coverage: 5 unit tests for resolve_plate_id, 4 unit tests for the
dispatch record on start_print, 2 integration tests for the cover
route (dispatch wins over plate-1 default; 3MF-scan fallback for
per-plate archive without dispatch record).
|
||
|
maziggy
|
69b6b5a334 |
fix(#1150): skip MQTT reconnect on watchdog timeout when project_file landed
Background: P1P firmware can take ~135 s after a project_file MQTT publish
to actually start parsing the uploaded .3mf — gcode_state stays IDLE and
subtask_id doesn't advance until parse completes. The dispatch watchdogs
treated the missed transition as a #887/#936 half-broken session and called
force_reconnect_stale_session, which interrupts the printer's in-progress
parse and triggers 0500_4003 ("can't parse print file") on the printer side.
Both #1150 (slow parse) and #887/#936 (zombie session) look identical from
state and subtask_id alone — both have stale state and stale subtask_id with
fresh telemetry. The distinguishing signal is the printer's gcode_file
field: it updates in push_status when the project_file command actually
lands on the printer, but stays unchanged when the publish was silently
swallowed.
Both watchdogs (_verify_print_response in background_dispatch and
_watchdog_print_start in print_scheduler) now capture pre_gcode_file from
printer_manager.get_status() before sending the publish, then on timeout
compare it against the last good status seen during the poll loop. If the
file changed, the command landed → log a #1150 warning, skip the forced
reconnect to avoid 0500_4003 mid-parse. If unchanged, fall through to the
original force_reconnect_stale_session call so the half-broken-session
recovery is preserved exactly.
Caveat documented in code: in a retry-same-file slow-parse scenario the
gcode_file looks identical pre/post-publish, so the watchdog falls through
to the reconnect path and the user still hits 0500_4003 on that retry.
Accepted to avoid breaking the half-broken-session recovery, which is the
more impactful regression of the two.
The new pre_gcode_file kwarg has a default of None on both watchdog
functions, so any caller that doesn't pass it keeps the original
reconnect-on-timeout behavior verbatim.
4 new unit tests cover both watchdogs: skip on gcode_file change (#1150
fix), reconnect when unchanged (#936 protection preserved), skip when
pre=None and current is non-None (printer just connected), reconnect when
pre_gcode_file arg is omitted (backward-compat). All 439 existing
dispatch / scheduler / mqtt tests pass unchanged.
|
||
|
maziggy
|
9d0418688c |
fix(#1134): propagate background-dispatch watchdog timeout as job failure
Follow-up to #1042. The post-dispatch watchdog _verify_print_response was fire-and-forget — it correctly detected when the printer never transitioned (HMS error pending, half-broken MQTT session, plate-clear gate, SD card fault) and force-reconnected the MQTT session, but the dispatch job had already been marked successful on the optimistic MQTT-publish-acknowledged path. The UI carried on showing "Print started successfully" while the printer sat idle. The watchdog now returns bool and is awaited inline by both call sites in _run_reprint_archive and _run_print_library_file. On False the call sites raise a RuntimeError carrying a user-actionable message ("Printer did not acknowledge print command — state still {pre_state}. Check the printer for a pending error...") which routes through the existing _run_active_job → _mark_job_finished(failed=True) → background_dispatch WS broadcast path. Library-file flow rolls back the freshly-created archive on timeout so no phantom row is left behind for a print that never started. The watchdog now also accepts subtask_id advancing past pre_subtask_id as a definitive "command landed" signal — same as the queue-side watchdog at print_scheduler.py:1992 — so slow H2D FINISH→PREPARE transitions (~50 s observed) don't false-fail when the printer has clearly accepted the project_file but is still in FINISH. Default timeout raised from 15 s to 90 s to match the queue-side watchdog and give the same headroom on both dispatch paths. Brief mid-window MQTT disconnects keep polling instead of immediately failing — matches what the queue watchdog already does and avoids false-failing on transient telemetry gaps. 11 new tests in test_background_dispatch_watchdog.py: state-change pickup, subtask_id-change pickup with state still FINISH, neither-changed timeout plus force_reconnect_stale_session call, pre_subtask_id=None backwards- compat, post-dispatch subtask_id=None not counting as a change, brief disconnect not short-circuiting the window, persistent disconnect for the full window returning False, default-timeout=90s contract, _run_reprint_archive raises RuntimeError with the captured pre-state args on watchdog False, _run_reprint_archive happy path doesn't rollback, _run_active_job marks the job failed with the message when _process_job raises RuntimeError. |
||
|
maziggy
|
e0e597271e |
● feat(#1008): library trash bin, admin bulk purge, auto-purge setting
Library files now move to a configurable-retention trash bin on delete
instead of being hard-deleted from disk (default 30 days). Admins get a
"Purge old" bulk action on the File Manager with a live preview, plus an
optional auto-purge setting in Settings → File Manager that runs the same
operation once per 24h when enabled (default off). Regular users see and
manage their own trashed files; admins see everyone's. External (linked)
files bypass trash since their bytes aren't under Bambuddy's control.
- New `library:purge` permission (admin-only by default)
- Nullable indexed `deleted_at` column on library_files; dialect-aware
ALTER TABLE so the column actually gets added on PostgreSQL (raw
DATETIME is SQLite-only syntax)
- New `LibraryFile.active()` classmethod; every query site routed through
it so trashed rows don't leak into listings, print dispatch, MakerWorld
dedupe, or stats
- Trash page: select-all + bulk restore/delete, per-row checkboxes, wider
layout so datetime columns don't clip
- Auto-purge: 24h throttle via `library_auto_purge_last_run` setting so
the 15-minute sweeper cadence still runs the purge at most once per day
- Save toast wired into every trash/auto-purge setting change
- 17 new backend integration tests (service + routes + auto-purge throttle),
8 new frontend tests, localised across all 8 UI languages
- Wiki + website feature entries updated
|
||
|
maziggy
|
1682b6956f |
fix(dispatch): clean up transient library upload from Direct-Print flow (#730)
The "Print" button on a printer card (and drag-drop-onto-card) used
FileUploadModal to persist the file as a LibraryFile, then dispatched
through POST /library/files/{id}/print. The LibraryFile row + disk file
were left behind after every one-off print, polluting File Manager with
entries the user never asked to save.
FilePrintRequest.cleanup_library_after_dispatch (default False) opts
into post-dispatch cleanup. When set, _run_print_library_file stages
db.delete(lib_file) in the same transaction as archive_print so a
mid-flight FTP / start_print failure rolls both back cleanly, commits
together, then unlinks the library disk file + thumbnail after commit
succeeds. External library files (is_external=True) are never touched.
Only the Printers-page Direct-Print PrintModal sets the flag. Every
other api.printLibraryFile caller (File Manager Print, Project Detail
Print) leaves it unset — their entries are there by user intent.
Also moves formatPrintName out of PrintersPage.tsx into a new
utils/printName.ts module —
|
||
|
maziggy
|
276a1db3ef |
fix(dispatch): forward authenticated user through library-print path (#730 follow-up)
The 0.2.3.1 fix (
|
||
|
maziggy
|
4a2b9bc5d4 |
fix(mqtt): self-heal half-broken session on dispatch timeout (#936)
When a project_file command was unacknowledged for 15s, Bambuddy previously logged "printer may need restart" and left the broken MQTT session in place — requiring the user to power-cycle the printer. The existing half-broken-session recovery only ran via the developer-mode probe path, which skips printers with a known developer_mode value. Extract the existing force-reconnect logic into a reusable helper and call it from _verify_print_response on dispatch timeout. The next dispatch attempt then lands on a fresh MQTT session without a reboot. |
||
|
lietschaend
|
f95b2acd7d |
Feature: print files directly from project view (closes #930) (#932)
* feat: print files directly from project view (closes #930) Show printable files from linked library folders directly in the project detail page, with Print Now and Add to Queue buttons per file. Removes the detour through the File Manager for common reprint workflows. |
||
|
maziggy
|
886fb90339 |
Fix print failing on files with spaces in filename (#824)
Filenames with spaces (e.g. "Junktion Box PRO 90.3mf") broke the MQTT print command because the url field (ftp://file name.3mf) contained unencoded spaces the firmware can't parse. FTP upload succeeded but the printer silently ignored the command and stayed IDLE. Replace spaces with underscores in the remote filename before upload and print command. |
||
|
maziggy
|
00bc1e214a |
Add print command response verification for #737
After sending a print command via MQTT, monitor whether the printer's gcode_state changes within 15 seconds. If not, log a warning visible in support packages. Addresses silent command drops observed on P1S firmware 01.09.01.00 where the printer ignores project_file commands while continuing to send status updates. |
||
|
maziggy
|
19a1a7584b |
Fix archive card showing "Source" badge for sliced .3mf files
The isSlicedFile() check only matched .gcode or .gcode.3mf extensions, so archives from .3mf prints (the standard Bambu slicer output) showed a "SOURCE" badge instead of "GCODE". Since .3mf can be either sliced or a raw CAD export, now checks the archive's total_layers and print_time_seconds metadata to distinguish them. Also passes the original filename when creating archives from file manager prints. |
||
|
maziggy
|
e6236301b4 |
Fix phantom prints from lingering SD card files (#477)
Three bugs allowed uploaded gcode files to survive on the printer's SD card, causing firmware restarts to auto-start old prints hours later. 1. The post-print cleanup retry loop always broke after attempt 1 regardless of delete success — delete_file_async returns False on failure instead of raising, so the except-based retry never fired. 2. When start_print() failed after uploading, the file was never cleaned up since on_print_complete never fires for prints that never started. 3. Cleanup failures were logged at DEBUG level, invisible in production. |
||
|
maziggy
|
e4e6e9f8c4 |
Decouples file uploads and print start commands so that they run in the background asynchronously. When a print is started, the print modal no longer waits for the print to upload and start. Instead, a new toast-based UI appears with the status of prints being dispatched. Prints being dispatched can be cancelled during upload. If cancelled, the partially-uploaded gcode is deleted from the printer automatically before the FTP connection is closed.
This allows users sending particularly large prints to slow printers such as the P1-series to start a print and then move onto another task in Bambuddy immediately (such as starting more prints on more printers). It also gives the user visibility into what's happening instead of a loading indicator appearing for an indefinite period of time. The new toast-based UI uses websockets to update in real time. It will also appear for other users / instances of Bambuddy, not just the user who started the prints, allowing more transparency and handling cases where the user closes the page and then comes back wanting to know the status of the dispatching. fix: review fixes for background dispatch PR #408 - Restore missing imports in main.py (inventory, print_log, virtual_printers, mqtt_smart_plug_service) - Guard voidresp() for A1 printers to prevent hang after upload - Don't fail upload on voidresp() error since data transfer already completed - Add ams_mapping to register_expected_print calls for Spoolman usage tracking - Fix cancel_job TOCTOU race by using single lock acquisition - Fix batch counter reset TOCTOU by re-checking condition inside second lock - Add backgroundDispatch translations to fr.ts and pt-BR.ts - Remove dead upload_progress_callback definitions - Skip redundant "Print queued" toast in reprint mode (dispatch toast handles it) - 5 backend tests: cancel_job single-lock TOCTOU, batch reset re-check, job lifecycle - 2 FTP regression tests: voidresp error handling (upload-loop fix), A1 model voidresp skip - 1 frontend test: reprint toast suppression - CHANGELOG: background dispatch feature + test coverage entries - README: add background dispatch to Scheduling & Automation - Website: add feature item to Automation section - Wiki: add Background Print Dispatch section to print-queue.md |
||
|
Ryan Ewen
|
4a625c1ef2 | Add background print dispatching + tests |