check_queue() read the plate-clear setting with _get_bool_setting(default=True),
but SettingsSchema.require_plate_clear defaults False and the whole frontend
treats a missing value as off. Since _get_bool_setting returns its default when
no DB row exists, installs that never saved the setting enforced the plate-clear
gate the UI showed as disabled — FINISH-state printers never dispatched and no UI
control existed to clear awaiting_plate_clear. Read the setting with default=False
so the enforced behavior matches the schema and the toggle. Both defaults shipped
together in #752; this aligns them.
get_network_interfaces() only sent Windows to the psutil path; macOS fell into
the Linux ioctl branch, whose SIOCGIFADDR/SIOCGIFNETMASK ioctls are Linux-only.
macOS/BSD have fcntl but different ioctl numbers, so every call raised OSError
and the function returned an empty list — the VP bind-interface dropdown showed
nothing. Route all non-Linux platforms through the cross-platform psutil path.
External cameras in HTTP-snapshot mode failed to load with a repeating
"connection lost" when the endpoint served PNG/WebP/BMP stills instead of
JPEG (common on IP cameras and reverse-proxied snapshot URLs). The URL
rendered fine directly in a browser, but Bambuddy's MJPEG stream wraps
every part in a hard-coded Content-Type: image/jpeg boundary, so a
non-JPEG payload labelled as JPEG made the browser reject the frame and
tear down the whole multipart/x-mixed-replace stream.
_capture_snapshot now transcodes non-JPEG stills to JPEG via OpenCV
(already a dependency). Genuine JPEG snapshots keep a byte-for-byte fast
path; truly undecodable responses (HTML error pages, auth redirects) fall
back to the previous raw-return behaviour with a single clear warning
instead of a per-frame log flood.
Native (non-Docker) installs launched uvicorn without --loop asyncio, so
uvicorn[standard] auto-selected uvloop. uvloop's SSL layer drops
already-received but still-buffered data when the client closes the data
connection without a TLS close_notify while the reader is flow-control
paused on slow storage. cmd_STOR writes each chunk to disk inside the read
loop, so a slow consumer falls behind, the tail is lost, read() returns a
clean EOF, and the loop exits with no exception -- the server acked 226 for
a file it truncated itself, then archived, queued, and forwarded the corrupt
3MF to the real printer.
Fix in two independent layers:
1. Remove the trigger: add --loop asyncio to every native launch path,
matching the Dockerfile -- deploy/bambuddy.service, install/install.sh
(systemd + launchd), spoolbuddy/install/install.sh, the Windows NSSM
service, README, CONTRIBUTING dev command.
2. Defense in depth (loop-independent): cmd_STOR now validates that a
received .3mf opens as a ZIP (reads the central directory, no
decompression) before replying 226. A truncated/corrupt file is dropped
and answered with 426, and on_file_received never runs -- so a broken
upload surfaces as an immediate slicer-side send error instead of being
archived and pushed to the printer. Scoped to .3mf; other filetypes pass
through unchanged.
Auto-drying stopped manually started (and pre-restart) AMS drying cycles
after exactly 30 minutes. The already-drying branch in _check_auto_drying()
applied a humidity-based auto-stop despite its own "track but don't stop"
comment, and the humidity re-check is unreliable: RH drops steeply in heated
air, so the sensor reads ~15-20% within minutes of the dryer starting even
with saturated filament. humidity <= threshold was thus effectively always
true, and the _min_drying_seconds=1800 floor pinned the stop to the 30-minute
mark. This also truncated Bambuddy's own preset-duration dries.
Remove the humidity-based early-stop entirely: a running dry now runs to its
configured duration (firmware stops it). Scheduling stops (print priority,
queue no longer needing the dry) are unchanged via _stop_drying(). Drop the
now-unused _min_drying_seconds.
The print-queue "auto off after this job" trigger used a second, inline
auto-off implementation (main.py, print_scheduler.py, print_queue.py)
that hardcoded wait_for_cooldown(50C, 600s) — ignoring each plug's
configured off_delay_mode / off_delay_minutes / off_temp_threshold — and
ignored the return value, powering off on the 600s timeout regardless of
print state. A print that failed and was reprinted from the touchscreen
got its power cut mid-print. The inline tasks were also uncancellable, so
a reprint couldn't abort a pending off.
Consolidate all three into SmartPlugManager.schedule_off_after_queue_job,
which schedules via the plug's configured strategy (shared with
on_print_complete through _schedule_off_per_mode) and is cancellable via
_pending_off. Add printer_manager.is_print_active() and guard the actual
power-off in _delayed_off and _temp_based_off so no path cuts power on a
loaded print. Move the on_print_start cancellation ahead of the auto_on
gate so a reprint always aborts a pending off.
Three bugs on the same PLA-model + PVA-support flow, discovered in
sequence:
(A) substitute_unused_plate_filaments inspected only object geometry
(per-object extruder metadata + paint_color triangles) so a support-
only slot was silently treated as "unused" and the user's PVA profile
got overwritten with slot 1's PLA.
(B) _extract_filament_info stripped filament_is_support==1 entries,
hiding PVA from unsliced source archive cards even when the project
explicitly configured it.
(C) --load-settings is authoritative over the source's project_settings.
config, and Bambu's shipped process presets ship enable_support=0
(supports are a per-print decision, not per-quality). So even with
(A) fixed, the sliced output had supports disabled and the PVA slot
loaded but never consumed. Inverts BambuStudio GUI's semantics where
the project overrides the preset.
Fixes:
- New extract_support_filament_slots_from_3mf reads enable_support +
support_filament + support_interface_filament from project_settings.
config; substitute_unused_plate_filaments unions it into the geometry-
derived set.
- _extract_filament_info returns all configured filament types + colours.
- New _patch_process_support_settings overlays four fields (enable_
support, support_filament, support_interface_filament, support_type)
from the source 3MF onto the picked process preset JSON before
--load-settings sees it. Deliberately targeted to what fixes#1881
without widening to a full project-over-preset merge.
Reporter (H2C + macOS 26.5.1 + BS 2.8.0.50): after every Mac sleep/wake
cycle, Bambu Studio couldn't see the VP or connect to it. Only fix was
quit BS + reboot Bambuddy. The physical printer's own cloud/LAN link
recovered in ~5 s from the same sleep — the delta was in VP session
handling.
Log evidence (bug-report-assets/logs/ddf1ede75df045cd94ad223d0f08f88a):
- 14:04:06 healthy `1Hz status push: 60 pushes/min to :54698`
- 14:04:06 → 14:09:16: five minutes of SSDP-only, no push summary for
:54698, no OSError, no disconnect line
- 14:09:16: new source port :54861 connects and authenticates fine —
the server was not rejecting reconnects
- 14:10:17 first DEBUG line: `MQTT drain timeout for
device/…/report — client may be busy` — smoking gun
Root cause: `_publish_to_report:1149` caught `asyncio.wait_for(drain,
timeout=5)` TimeoutError at DEBUG and returned silently. TimeoutError
is not OSError, so the push loop's `except OSError` at :441 never saw
it — the zombie writer sat in self._clients until the kernel's default
TCP keepalive detected the dead peer (Linux default: ~2 h 11 min).
Two hunks:
1. `_publish_to_report`: on drain TimeoutError, close the writer (best
effort, catch Exception so an already-broken close() doesn't mask
the raise) and raise BrokenPipeError, which IS OSError. Push loop
evicts on the same tick.
2. `_handle_client`: after SO_KEEPALIVE=1, set TCP_KEEPIDLE=60,
TCP_KEEPINTVL=15, TCP_KEEPCNT=4 — dead-peer detection in ~2 min
instead of ~2 h. `getattr(socket, ...)` guards keep it cross-
platform (macOS uses TCP_KEEPALIVE not TCP_KEEPIDLE, other kernels
may not expose all three — skip whichever is missing).
What I got wrong first pass and corrected on log-read: hypothesised
"missing MQTT session takeover on same client_id". Wrong. _handle_connect
parses the protocol client_id but discards it (assignment commented out
at :762), and self._clients is keyed on `f"{addr[0]}:{addr[1]}"` (socket
peer), so every reconnect gets a distinct key. No takeover race exists.
The log fixed this: the "not seen" symptom is BS-side (macOS UDP
receive after sleep + BS holding the pre-sleep socket state), but the
server-side amplifier was the zombie writer.
Non-proxy VP mode hardcoded the camera-passthrough TCPProxy to
listen_port=322 / target_port=322 regardless of the target printer's
model. That port is correct for RTSPS models (X1/X2/H2/P2S), but A1 /
A1 Mini / P1P / P1S use Bambu's proprietary chamber-image protocol on
port 6000. Result: A1/P1 targets got a 322 listener with no upstream,
OrcaSlicer Liveview failed with [2:-10061], BambuStudio's camera button
timed out.
Reporter confirmed a raw socat forwarder `<VP-IP>:6000 → <P1S-IP>:6000`
restored the stream — the target camera works, the VP just wasn't
publishing it.
Proxy mode was unaffected because SlicerProxyManager already opens 6000
(nominally file-transfer; Bambu reuses the port for chamber-image), so
the passthrough coincidentally works there.
Fix: read the target's model from
`printer_manager.get_client(target_id).model` at the same point we read
target_ip, then use `get_camera_port(target_model)` — the same source of
truth as routes/camera.py — to pick 322 or 6000. Model comes from the
physical printer, NOT self.model (the VP's spoofed identity has no
bearing on how the real device serves its camera).
Renamed the log tag from "RTSP" to f"Camera-{camera_port}" so support
bundles show which protocol the VP is fronting at a glance. Kept the
_rtsp_proxy attribute name to keep the diff tight; the block comment
spells out that it doubles as chamber-image passthrough on A1/P1.
A1 Mini firmware skips stg_cur=22 entirely, so the finish-photo fallback
fires at gcode_state=FINISH — which runs AFTER Bambu Studio has already
executed the user's End G-code. Users with SwapMod plate-swap injected
into End G-code always got a photo of the swapped (empty) plate.
Add a layer_num >= total_layer_num edge trigger in _parse_print_data so
the pre-capture fires the moment the last object layer completes, on
every printer variant. Guarded by the existing _finish_photo_captured
one-shot so stage-22 and FINISH-state hooks become no-ops for the same
print — no framing regression on AMS printers without custom end G-code.
usage_tracker's tray-switch split has never had a Spoolman peer.
An AMS same-material runout switch mid-print charged the whole slot
to the origin spool via the (via tag) path and double-credited the
backup via remain-delta — origin exceeded initial_weight.
Extract the segment-math into utils/tray_split.compute_tray_split_grams
and call it from both writers so the two inventory backends attribute
mid-print switches identically. spoolman_tracking gains
_report_spool_usage_split_by_tray_changes; the Path 2 remain-delta
fallback now skips trays the split path covered, killing the
double-count.
get_setting_detail and delete_setting were hitting
/v1/iot-service/api/slicer/setting/{id} without the version query
parameter Bambu Cloud requires — every call returned HTTP 400
"field 'version' is not set". The sibling plural GET
(get_slicer_settings) has always sent it; the comment above
_SLICER_API_VERSION documents the contract for the endpoint subtree.
Missed when the placeholder landed in the 2026-05-12 compliance rework.
Downstream effect: slicer_filament_resolver.resolve_slicer_filament's
PFUS branch swallowed the 400, fell through to normalize_slicer_filament,
and caller inventory.py generic-material-fell-back tray_info_idx to
GFL99/GFG99. BambuStudio's AMS panel reads the printer's tray_info_idx
echo, so the user saw "Generic PLA" instead of the custom cloud preset.
Masked for 50 days by two rescue paths in the caller: prior-slot
tray_info_idx reuse, and stored spool_k_profile → live state.kprofiles
realign. Reporter's spool 54 → tray 2 assign had neither.
Adjacent surfaces also fixed by the same two-line change: the delete
cloud preset UI route, the whole update_setting flow (get_setting_detail
→ delete_setting → POST), preset_resolver's cloud branch, and three
UI-facing cloud.py routes that fetch setting detail.
get_setting_detail also includes the truncated response body in the
raised BambuCloudError so the next contract change is self-diagnostic
from support-bundle logs.
Symptom: user queued a batch of 10 prints, pressed Cancel on a pending
row, the print started anyway. Repeated consecutively. Support bundle
also showed 15x "sqlite3.OperationalError: database is locked" from the
sensor history recorder in the same 8-minute window.
Root cause is a check-then-act race in _start_print. check_queue takes
a snapshot of pending items, then _start_print does FTP delete + FTP
upload (5-30s) before the unconditional item.status = "printing";
db.commit() at line 2792. /cancel commits status='cancelled' in a
separate session during that window; the scheduler's stale in-memory
write overwrites it and start_print ships. The lock-contention finding
is the same shape from a different angle: _start_print did
await db.flush() at line 2555 (after item.archive_id set + library_file
delete) which opens the SQLite WAL writer lock and holds it through
the FTP upload, queueing every concurrent writer behind it including
the user's own cancel commit.
Three guards layered:
1) Atomic CAS at the pending->printing transition. UPDATE print_queue
SET status='printing', started_at=NOW() WHERE id=:id AND
status='pending'. rowcount==0 means user won; log abort, best-effort
delete_file_async the file we just FTP'd up so it doesn't leak into
the printer's BambuStudio file picker, send queue_item_failed WS
event with reason="cancelled_mid_dispatch", return without calling
printer_manager.start_print.
2) Early db.refresh(item) + bail right after the printer connectivity
check. Saves the wasted FTP upload when the row was already
cancelled before _start_print resumed. Defense in depth; guard 1
catches the same case at the CAS point.
3) flush -> commit before the FTP block. The library-file-to-archive
promotion's writes commit cleanly, WAL writer lock releases, sensor
history and concurrent cancels stop queueing behind the scheduler.
The flush-not-commit pattern was rolling back a pointer to an
already-committed archive row, so the new behaviour matches reality
(archive committed, pointer committed, FTP unblocked).
New scheduler stage that heats the bed (and the chamber, on supported
printers) and holds at temperature before each queued print starts —
the heat-soak engineering filaments need for adhesion and warp
control. Bambuddy waits between FTP upload and start_print, so the
soak runs while the printer is otherwise idle. M191 is silently
ignored by Bambu firmware, so doing this at the orchestration layer
is the only place it works.
Resolution order at dispatch:
1. PrintQueueItem.preheat_override ∈ {inherit, on, off}.
'off' skips entirely; 'inherit' falls back to the global
preheat_enabled toggle; 'on' forces the stage even when the
global is off.
2. chamber_target = item.preheat_chamber_target_override
?? max(filament_map[normalize(t.tray_type)] for loaded slots)
?? 0.
Mixed PA+PLA picks PA's 50 (max-across-slots — PA's chamber
requirement is binding, PLA doesn't suffer being warm). PLA-only
derives 0 and skips the chamber phase automatically.
3. Three hardware tiers for chamber heat:
- Active chamber heater (H2C/H2D/H2D Pro/H2S/X2D/X1E) → M141 +
chamber-sensor wait
- Chamber sensor only (X1C/P2S) → no M141, passive bed-radiation
wait with hard max-wait cap
- No chamber sensor (P1S/P1P/A1/A1 Mini) → bed + soak timer only
4. Airduct flap (H2C/H2D/H2D Pro/H2S/X2D/P2S) auto-switches to
match the chamber target — heating mode for engineering
filaments, cooling mode for PLA. Bambu firmware does NOT
auto-switch the flap with M141, so without this an ABS print
on a previously-cooling flap fights the open exhaust, and a
PLA print on a previously-hot flap recirculates ABS heat.
Idempotent: only fires set_airduct_mode when current ≠ desired.
Settings → Workflow → Queue & Dispatch → Preheat & Heat Soak card:
master enable toggle (default off — disabled installs see no change),
per-filament chamber-target editor (replaces a single global int that
shipped in the first cut and couldn't serve PA + PLA in the same
config), preheat_max_wait_seconds, preheat_soak_seconds. The Print
Options panel in PrintModal gets a Preheat sub-section with the
tri-state Inherit/On/Off control and an optional chamber-target
override input.
DB migration: PrintQueueItem gains preheat_override VARCHAR(10)
DEFAULT 'inherit' and preheat_chamber_target_override INTEGER NULL.
Idempotent via _safe_execute. Existing rows behave exactly as before
the migration.
Best-effort throughout: printer drops, refused M141 or set_airduct,
missing bed temp, lost MQTT state mid-wait all log and return cleanly.
Normal upload + start path runs after this returns regardless.
The HMS error modal had three compounding bugs that surfaced when a
user forced a wrong-plate HMS (0500_8051) and tried to dispatch the
per-fault actions.
(1) IGNORE_RESUME did not ignore. Bambuddy redirected the action on
state=PAUSE to a plain `resume` command, citing a #1830 verdict that
BambuStudio's "err-bearing shape" was firmware-silently-rejected.
BambuStudio source disagrees: DeviceErrorDialog.cpp:600 dispatches
IGNORE_RESUME via command_hms_ignore, whose wire shape is
{command:"ignore", err:"<decimal>", param:"reserve", job_id:...}.
That's a distinct command from `resume` — the firmware suppresses
the next re-check AND auto-resumes in one operation. Plain resume
means "re-check normally", which is exactly why the wrong-plate
detection re-fired 1-2 s after the user clicked Ignore. The #1830
"err-bearing shape rejected" test almost certainly sent the err as
a hex shortcode; BambuStudio passes std::to_string(int m_error_code)
i.e. the DECIMAL form, which is what the firmware matches against.
(2) Action buttons read as inert badges. The button className used
`hover:${buttonHoverColor}` — a template-literal interpolation
Tailwind's JIT scanner can't see as a literal string, so the
per-severity hover utility never reached the compiled CSS. Same
bg/text color as the severity badge above and no border made it
read as another label. No disabled state and no spinner during the
2.5 s ack wait left clicks sitting silently inert.
(3) Ack-detection 502'd on legitimate ack. The route compared
(gcode_state, hms_errors-len) before vs after publish; wrong-plate
re-pause round-tripped both fields to their pre-publish values
inside the 2.5 s window → false 502 even though the firmware fully
ack'd. PROBLEM_SOLVED_RESUME working but IGNORE_RESUME 502'ing on
the same fault was the same race resolving differently.
Fixes:
bambu_mqtt.py — new hms_ignore_command() publishes the BambuStudio
shape; existing hms_ignore(persistent) renamed to hms_idle_ignore
(unchanged shape, used by NO_REMINDER_NEXT_TIME per
DeviceErrorDialog.cpp:588). Dispatch routes IGNORE_RESUME,
IGNORE_NO_REMINDER_NEXT_TIME, and DONT_REMIND_NEXT_TIME to
hms_ignore_command (BambuStudio routes all three to the same
command_hms_ignore — the "don't remind" half is the firmware's
job). NO_REMINDER_NEXT_TIME stays on hms_idle_ignore type=0. Hex →
decimal err conversion at the helper layer with a defensive
fallback. job_id=None → empty string (matches BambuStudio's
std::string default).
HMSErrorModal.tsx — getSeverityInfo loses the dead buttonHoverColor
field. Action button uses static
`bg-white/10 hover:bg-white/20 active:bg-white/30 text-white
border border-white/20`, wires
`disabled={!hasPermission||mutation.isPending}`, and renders
`<Loader2/>` only on the button whose (action,print_error) matches
mutation.variables.
printers.py — ack-detection probes `client._last_message_time`
(bumped on every MQTT push regardless of payload) rather than
diffing state fields. The pushall that follows every command
guarantees a fresh push lands inside the 2.5 s window on any
healthy printer; only firmware-silent-drop leaves the timestamp
untouched, which is the 502 path #1830 wanted.
FTP push to the printer into the server-side scheduler tick. That
removed the browser-side upload the old XHR-progress modal listened
to — users only saw the queue item flip to "active" with no visibility
into the FTP push + the H2D/H2D Pro 80-210 s project_file digestion
window before the printer actually started.
Port the legacy bg-dispatch toast rendering from
0b43ac0d:frontend/src/contexts/ToastContext.tsx lines 510-650 back in
place verbatim — same DOM tree, same Tailwind classes, same
formatFileSize bytes line, same uppercase status chip, same collapse
chevron, same awaitingPrinter derivation, same auto-dismiss. The only
adapt is the event ingestion: a useEffect maps the four scheduler-side
WS events to the legacy DispatchToastJob shape.
The toast materializes when the FTP push to the printer ACTUALLY
STARTS (queue_item_uploading) — NOT on POST /queue. A draft that
fired at queue-add made the toast jump to "Dispatched" before any
upload had happened.
Four backend WS events drive it: uploading (carries printer_name +
total_bytes), upload_progress (throttled at 200 ms / 256 KB to match
legacy background_dispatch.py:614-615 1:1, first call always emits,
completion always emits; an _UploadProgressBridge bridges from the
FTP executor thread to the asyncio loop), acked (printer transitioned
out of pre_state), failed (with a reason key the toast looks up as
dispatchToast.failed.{reason}). No queue_item_dispatched event: the
legacy path kept status=processing from upload start until printer
ack, "Awaiting printer..." derives from upload_progress_pct >= 99.9
(legacy uploadDoneAwaitingPrinter trick).
Per-user routing: WS connect resolves the principal username to
User.id once and stashes it on websocket.state, so
ws_manager.broadcast_to_user filters O(connections). Auth-disabled
installs route user_id=None to all connections — matches the legacy
single-user behaviour. The watchdog receives created_by_id through a
new kwarg so the static method can still emit acked without
re-fetching the queue item.
extract_nozzle_mapping_from_3mf has a single-active-extruder shortcut
(added in #851 for #827) at threemf_tools.py:354 that runs before the
per-filament group_id mapping. It fires whenever
extruder_nozzle_stats reports exactly one extruder as active. On
multi-nozzle Bambu printers (H2D / H2D Pro / X2D / H2C) the slicer
under-reports the second extruder when its nozzle volume-type isn't
enumerated in the slice's profile (common with HT-AMS / High-Flow
asymmetric setups, e.g. HT-AMS feeding the right nozzle on an H2D):
['Standard#1', 'Standard#0'] even when both extruders are genuinely
used. sum(active_extruders) == 1 → every filament was force-assigned
to physical_extruder_map[active_idx], the authoritative group_id was
discarded, and the Filament Mapping panel showed both filaments
badged L with the auto-match hard filter blocking the wrong-nozzle
tray as "Type not found".
Bug is parser-side and model-agnostic, not gated on AMS hardware —
typical dual-AMS H2D slices contain ['Standard#1', 'Standard#1']
(sum==2), never enter the shortcut, and work fine. Physical extrude
routing was not affected (gcode + project_file nozzle_mapping path
from #1780 is authoritative). User-visible harm: wrong L/R badge and
no auto-match for the second nozzle.
Gate the shortcut on len(distinct_group_ids) <= 1 from
slice_info.config. The slice_info parse is hoisted above the shortcut
and reused by Priority 1, so the gate adds zero extra I/O. The gate
only narrows the shortcut — it can't widen the bug onto any
previously-working slice. Generalizes to H2C and any N-nozzle printer
for free (no per-printer branching).
Three distinct bugs combined into one user-facing failure: clicking
Stop / Problem-solved-and-resume / Ignore-and-resume returned 200 OK
but the printer didn't act, modal stayed up, print stayed paused.
Verified by injecting candidate command shapes on device/<sn>/request
against a live H2D paused on a wrong-plate HMS (print_error=0x05008051).
(1) hms_resume / hms_stop dispatched the "err"-bearing shape that
BambuStudio doesn't actually send; Bambu firmware silently rejects it.
Both now send the plain shape ({"print":{"command":"<x>","param":"",
"sequence_id":"0"}}). PAUSE -> FAILED in 1.7s for stop, PAUSE -> RUNNING
in <2s for resume.
(2) IGNORE_RESUME mapped to idle_ignore, which is BambuStudio's
"dismiss a warning" command and only works for non-pause warnings.
hms_ignore now branches on state.state == "PAUSE": paused -> plain
resume; not-paused -> idle_ignore with the full-length err.
(3) 64-bit hms[]-array faults were truncated to a non-matching err.
short_code in _parse_status discarded 32 of the 64 identifier bits, so
the firmware didn't match it to the active fault. HMSError.full_code
now carries the canonical hex identifier (16 chars for hms[] faults,
8 chars for print_error faults). Catalog lookup tries 16-char first,
falls back to 8-char. HmsActionBody.print_error pattern relaxed to
^[0-9A-Fa-f]{8}([0-9A-Fa-f]{8})?$.
(4) execute_hms_action returned publish-success as success, masking
every silent-rejection bug above as 200 OK. Route now snapshots
(state.state, len(state.hms_errors)) before dispatch, awaits
HMS_ACTION_ACK_WAIT_SECONDS (default 2.5s, module-level so tests
override), and returns 502 with "Printer did not acknowledge HMS
action within 2.5s" if state didn't move.
The toast was calibrated for power users — lowest bars were 100 prints,
50 archives, 100 cost. Most installs never crossed any of them, especially
with the install base ~doubling since March. Matomo confirms: only 4
prints-100 and 3 archives-50 deeplink visits to /sponsors.html in a 7-day
window despite tens of thousands of weekly pulls.
Adds lower thresholds without changing priority order or cooldown:
PRINT_MILESTONES = (10, 25, ...)
ARCHIVE_MILESTONES = (5, 10, ...)
COST_MILESTONES = (25, 50, ...)
Existing toast copy uses {count}/{total} interpolation in all 11 locales,
so no i18n changes. Tests rebalanced so "below the floor" still tests
with the new floor; new test_fires_at_lowest_threshold pins prints-10.
The /system/appliance endpoint is fetched by the SPA's i18n bootstrap on
mount to seed locale, hostname, timezone, and the chrony NTP-gate state
BEFORE any login state exists. The route handler itself has no auth
dependency and the test_route_auth_coverage allowlist correctly marks it
public, but the global auth_middleware in main.py — which short-circuits
every /api/ path not in PUBLIC_API_ROUTES — was never told about it.
Result: every browser session on an auth-enabled install logged a 401
on the appliance endpoint before login.
Added /api/v1/system/appliance to PUBLIC_API_ROUTES with a comment
pointing at the dual-list pattern so this doesn't drift again, and a
regression test in TestAuthMiddlewarePublicRoutes that posts /auth/setup
to turn auth on, then asserts the endpoint returns 200 with the
documented shape (hostname / timezone / locale / time_synced fields all
present).
Adds a global local_login_enabled setting plus a per-provider
is_autologin flag on OIDCProvider so operators who run their own SSO
enabled, or if the calling admin has no UserOIDCLink — either would
lock everyone out. App-layer invariant: at most one provider can carry
is_autologin; setting it on one clears it on every other.
/auth/advanced-auth/status surfaces both new fields so the LoginPage
decides UI in one query. The env-var bypass flips the reported
local_login_enabled back to true so the SPA matches what the route
will accept.
Bambu's per-tick AMS push carries only the dry_time countdown — the
filament name and target temperature the user chose are never echoed on
the wire. The AMS card had no source of truth for them and rendered the
bare "Drying · 11h 35m left". The badge now shows
"Drying · PETG @ 65°C · 11h 35m left", matching the cycle the user
actually started.
BambuMQTTClient caches {ams_id: {filament, temp}} on send_drying_command
(mode=1), clears on mode=0 and on the dry_time falling edge to 0 — the
same per-AMS edge detector that drives the smart-plug-after-drying
callback. PrinterManager.get_drying_targets exposes it, the four
printer_state_to_dict call sites thread it through, AMS schema gains
dry_target_temp + dry_filament, and routes/printers.py builds the same
fields into the manually-constructed AMSUnit response.
When no cached target exists (drying started in a previous backend
lifetime, or initiated outside Bambuddy), the badge falls back to the
first loaded tray's tray_type + RFID-recommended drying_temp — the
heuristic the popover already uses to seed defaults.
i18n: printers.drying.targetSummary = "{{filament}} @ {{temp}}°C" in
all 11 locales. Parity check 5356 leaves per locale.
Note: a user reported the H2D's own physical display still labels the
cycle by the loaded tray's filament (e.g. "PLA" instead of the
Bambuddy-requested "PETG"). The wire payload is correct end-to-end —
journalctl shows filament: "PETG" sent and result: success ACKed — and
the badge in Bambuddy's own UI now reflects what we actually sent,
independent of the firmware's display choice.
Continue Auto-Drying while a print is running on capable hardware.
New Settings > Print Queue > "Continue drying while printing" toggle
(default OFF). Extends _check_auto_drying in print_scheduler.py to
evaluate running printers when supports_drying_while_printing(model,
firmware) returns true. Strict allowlist verified per Bambu wiki
release notes for "Print While Drying" / "printing while filament is
drying": H2D 01.03.00.00+, H2C/H2S/P2S/H2D Pro 01.02.00.00+, X2D/A2L
01.01.00.00+, X1C 01.11.02.00+. P1*, A1, A1 Mini, X1 (non-C), X1E
intentionally excluded. Mid-print drying temperature is capped at
max(40, preset_temp - 5) to protect spools from heat damage inside the
hot enclosure during a print, matching Bambu's own "lower drying
temperature during printing" guidance.
Rotate-spool toggle in the drying popover is now disabled when any tray
in the targeted AMS has filament threaded into the feed tube
(tray.state === 11). The whole AMS rotates as one mechanism, so a
single loaded slot locks the entire unit. Previously the toggle was
always clickable and the firmware rejected with dry_sf_reason=[3]
(ConsumableAtAmsOutlet) after the click. The first cut keyed on the
printer-level tray_now but missed the H2D's typical post-print state
where tray_now resets to 255 while filament stays in the tube — the
per-tray state field reports it correctly. Submission also clamps
rotateTray off so a stale-true state from a previous AMS can't leak
through.
Backend: supports_drying_while_printing in printer_manager.py covers
display names and internal SSDP/MQTT codes (O1D, O1E/O2D, O1C/O1C2,
O1S, N6, BL-P001, N7, N9). New print_drying_enabled boolean in
settings schema. Frontend: toggle on SettingsPage, gate + clamp on
PrintersPage drying popover using existing amsData cache. i18n: 3 new
keys x 11 locales, no English fallback. Tests: 7 cases on the gate
matrix (TestSupportsDryingWhilePrinting), 4 cases on the scheduler
mid-print path (TestMidPrintDrying), 9 cases on the rotate gate state
transitions. Full backend pytest -n 30 green (4251/4251), ruff clean,
frontend npm run build clean, i18n parity 5355 leaves per locale.
Reprints triggered a bogus "Print Stopped" push notification while the print
kept running, surfaced by the reconciler synthesising a missed PRINT COMPLETE
on MQTT reconnect.
bambu_mqtt:3647 mints a fresh subtask_id per dispatch. On reprint, the
on_print_start expected-archive promotion only wrote subtask_id when the
stored value was empty (`not archive.subtask_id`) — so the archive kept the
FIRST run's id. On the next MQTT reconnect, reconcile_stale_active_prints
(#1542) compared the stale stored id against the printer's live id, found
a mismatch, and synthesised a status="aborted" PRINT COMPLETE — which fires
the "Print Stopped" notification.
Captured cleanly in the reporter's support bundle:
[RECONCILE] Printer 1: synthesising missed PRINT COMPLETE for archive 31
— subtask_id changed ('1844213296' → '2103771517')
immediately followed by gcode_state: RUNNING on the same wire.
Fix: update archive.subtask_id whenever the new effective id differs from
the stored one, not only when the stored one is empty. Inequality check
preserves the noop-on-stable-push behaviour the original guard provided.
Two places in main.py (expected-print and duplicate-printing-archive
branches). 3 new unit tests cover the reprint, first-run, and stable-push
paths. Reconciler itself unchanged — it was doing the right thing given
the data it had.
Brings the Spoolman writer up to parity with the internal-inventory
side, which has had this fallback since #1119. When a Bambu print
starts without a retrievable .gcode.3mf on the printer (typically an
unsaved BambuStudio project, subtask_name='Untitled'), Spoolman no
longer silently skips the print's filament consumption.
- ActivePrintSpoolman.filament_usage now nullable; new tray_remain_start
column captures per-slot {remain, tray_uuid} at print start.
- store_print_data: always snapshots remain, even when 3MF is present
(mirrors usage_tracker.on_print_start), so partial-3MF prints can also
fall back per-slot.
- report_usage: 3MF path stays primary; new _report_remain_delta_for_slots
handles slots the 3MF didn't cover via delta * Filament.weight / 100,
resolving the spool via the existing slot-assignment table.
- _report_partial_usage: same fallback for aborted no-3MF prints.
#1119 invariant preserved: per-slot, per-print, gated on a valid
start/current remain AND a resolvable Spoolman spool. Uses curated
Filament.weight (not MQTT's unreliable tray_weight) — same trick the
internal-inventory side uses.
Mid-print spool swap detected via tray_uuid mismatch → slot skipped.
Double-charge prevented via handled_global_tray_ids dedup.
SpoolBuddy "Assign to AMS" with a Bambu Cloud user preset (PFUS) left
Bambu Studio showing "Generic <Material>" instead of the user's
custom preset. Root cause: the defensive filter that catches
PFUS/PFCN leaks into tray_info_idx also cleared setting_id —
but PFUS/PFCN are VALID setting_id values, just not valid
tray_info_idx values. When the cloud detail lookup didn't return
a filament_id (cloud unauth on the on_ams_change replay path,
transient failure, or older custom presets), both fields got
cleared and the caller's generic-material fallback overwrote
setting_id with GFSG99 — slicer resolved to Generic PETG.
Fix: the filter still clears tray_info_idx for PFUS/PFCN/material-
name leaks, but preserves setting_id when it's a valid slicer
reference (PFUS / PFCN / GFS). Material-name leaks still clear
both. Post-fix MQTT carries tray_info_idx=GFG99 (firmware-acceptable
for HMS/drying/colour) AND setting_id=PFUS<hash> (slicer uses this
to load the actual user preset).
What stays the same: Bambuddy's own AMS card still displays
the generic material on cloud-unauth paths — same fundamental
limitation as today. Fixing that needs a deeper layered fallback
(LocalPreset name match, printer kprofile query, cloud-detail
cache) and is out of scope for this drop. Slicer-side fix is
the reporter's explicit ask.
H2S firmware reports tray_now=0 (the AMS's idle slot) throughout
external-spool prints instead of 254 like X1C/P1S/A1 do, so the
single-nozzle branch's 0-3 passthrough landed state.tray_now on slot
0 — UI highlighted AMS SLOT 1 instead of the external spool.
Usage credit was unaffected (#1276 covers that via ams_mapping).
The single-nozzle branch now checks _captured_ams_mapping (slicer-
captured per-filament mapping that the request-topic intercept
already tracks) before the existing P2S multi-AMS resolver. When
every entry is -1, the print uses ONLY the external spool, so
state.tray_now is promoted to 254.
Narrow on purpose: AMS-only [5] and mixed [5, -1] are NOT
overridden — we have no evidence H2S misreports mid-print swaps, and
trusting the firmware preserves correctness for users with multi-
filament setups. No-mapping prints (printer-screen start) fall
through unchanged.
Single failure on a printer with require_previous_success queue items
permanently skipped every downstream + every new item — the
_check_previous_success lookback always walked back to the original
failed row (skipped is excluded from the lookback), and no code path
could dismiss that failure.
Three pieces:
1. PrintQueueItem.gate_acknowledged Boolean column (default False).
SQLite/Postgres-safe ALTER, dialect-branched DEFAULT.
2. _check_previous_success skips rows where gate_acknowledged=True so
acknowledged failures walk past the lookback. Fresh post-resume
failures still gate independently.
3. POST /api/v1/queue/printer/{printer_id}/resume — gated on
QUEUE_UPDATE_ALL — acknowledges failed/aborted items for that
printer AND restores items where
status='skipped' AND error_message='Previous print failed or was
aborted' back to pending in one transaction. Returns
{acknowledged, restored}.
Frontend banner above the active Queue tab surfaces blocked printers,
fires a warning-variant ConfirmModal, and shows a precise toast on
success.
Round 2 (166e9f9e) fixed the stash-key mismatch, but @mkoreen's
2026-06-23 bundle showed BS's MQTT project_file arrived 85 ms past the
2.0 s wait timeout (FTP done 00:42:02.509, "No slicer options cached"
00:42:04.509, MQTT 00:42:04.594). Queue item was committed with
settings defaults; nozzle_mapping never made it onto the wire.
Three pieces:
1. _SLICER_OPTIONS_WAIT_TIMEOUT module constant, 2.0 -> 5.0 s. Covers
wireless / loaded-Pi jitter; one-time +3 s cost only for legacy
slicers that never send MQTT.
2. _RECENT_QUEUE_ITEM_TTL fallback: on_print_command retroactively
UPDATEs slicer-driven fields on a recently-committed queue item
when the event wait already gave up. Tracked via
_recent_queue_items dict (30 s TTL, evicted on every queue-add).
Gated on status='pending' so we never race the dispatcher.
Multi-plate covered via WHERE id IN (...).
3. Post-commit last-chance pop. Audit caught a race in (2): MQTT could
arrive during any await inside _add_to_print_queue (wait_for,
archive_print, db.flush, db.commit), and on_print_command would
stash data with no event consumer AND no _recent_queue_items entry
yet. After populating _recent_queue_items, _add_to_print_queue now
pops _slicer_print_options[file_path.name] one last time and
routes any hit through _restamp inline.
Extends the appliance endpoint that landed in the previous commit with a
time_synced field, sourced from /run/bambuddy/time-synced (the appliance's
ntp-gate.sh writes this once chronyd reports sync, or with a "warning"
marker after the 3-minute timeout). The RPi 5 has no battery-backed RTC,
so on a fresh boot the system clock is wrong until NTP catches up -- JWT
expiries and TLS certificate validity windows depend on this being right.
Exposing the gate lets the SPA render a "time not synced" indicator while
that's still true and clear it once "ok" comes through.
backend/app/core/local_config.py
New read_ntp_gate(path) function alongside read_local_toml. Three states:
"ok" chrony reported sync within the 3-minute window
"warning" 3-minute timeout elapsed without sync; user already waited
and the wizard proceeded with a degraded clock
None file absent (non-appliance install), OSError, empty content,
unknown marker, or binary garbage -- "unknown / don't gate"
Defensive read mode (errors="replace") survives non-utf8 content without
crashing. Module docstring broadened from "local.toml reader" to "small
readers for appliance-set state files".
backend/app/api/routes/system.py
/system/appliance now returns:
{hostname, timezone, locale, time_synced}
with the same no-auth posture: bootstrap surfaces (i18n init, time-sync
banner) read this before auth might be set up, and the contents are
non-secret (user-set defaults + a public sync flag). The endpoint
docstring expands to explain the RTC motivation -- otherwise the
time_synced field reads like a leftover.
Closes the cross-repo contract started in bambuddy-appliance: the firstboot
wizard writes /etc/bambuddy/local.toml with the user's hostname / timezone /
locale, but nothing on the main app side read it. Hostname + timezone are
already applied by the appliance's firstboot.sh via hostnamectl /
timedatectl. This PR closes the loop for the third field — locale — so the
language the user picked in the wizard actually shows up on first SPA load.
backend/app/core/local_config.py
New module. read_local_toml(path) returns a LocalConfig TypedDict
({hostname?, timezone?, locale?}) parsed from /etc/bambuddy/local.toml.
Defensive on every failure mode -- missing file returns {}, invalid TOML
returns {} + log warning, non-string values dropped with warning. The
reader never raises; a malformed config never blocks startup.
backend/app/api/routes/system.py
New endpoint GET /system/appliance. Returns {hostname, timezone, locale}
with null for any field not present in the TOML. No auth required: the
frontend i18n bootstrap reads this before auth might be set up, and the
contents are user-set defaults, not secrets. The function calls
read_local_toml() with no args (default path) so tests can monkeypatch
the module's read_local_toml reference to inject fixtures.
frontend/src/i18n/index.ts
One-shot applyApplianceLocale() runs after i18n.init(). Gated by a
bambuddy_appliance_locale_consumed localStorage flag so it runs at most
once per appliance. Fetches /api/v1/system/appliance, validates the
returned locale against supportedLngs, calls i18n.changeLanguage if
valid. Silent .catch() because the endpoint absent / unreachable means
non-appliance install or dev environment -- we leave the LanguageDetector's
choice in place. The consumed flag is set on success; future loads skip
the fetch entirely. Won't override a user's explicit language pick (the
language picker writes to a separate localStorage key, bambutrack_language).
Reporter (email provider, "Reason: unknown" failures) wanted a camera snapshot
in failure emails. The finish-photo capture path shipped in 0.2.5b1 (#1397)
already loads JPEG bytes into archive_data["image_data"] for terminal print
events, and pushover/telegram/discord/ntfy users have been getting them.
Email was the one provider that dropped the bytes on the floor. Reporter
separately flagged that the Message Templates list shows "Print Completed"
and "User Print Completed" with no visual cue they're different dispatches.
Both fixes in one commit because they touch the same UI surface (Message
Templates) and both stem from the same reporter conversation.
1) Inline finish-photo embed in email — template-driven, opt-in.
_send_email now accepts finish_photo_url alongside image_data. Inline
embed fires only when bytes are present AND URL is set AND the rendered
body contains that URL — i.e. the user's template referenced the existing
{finish_photo_url} variable. The multipart/related shape wraps a
multipart/alternative (plain + HTML) plus an inline MIMEImage with
Content-ID: <bambuddy-finish-photo>. The HTML part replaces the escaped
URL in-place with the cid <img>, so the image appears WHERE the user put
the variable in the template, not stapled to the bottom. Plain-text part
keeps the URL as a clickable link for non-HTML clients.
First draft of this fix unconditionally inlined the photo whenever
image_data was present, which bypassed the template system. Reverted to
the template-driven contract: default templates unchanged, opt-in by
editing the template body to include {finish_photo_url}.
2) user_print_* template name disambiguation.
The four user_print_* templates are the per-user SMTP emails sent to the
print's submitter (advanced-auth-only path). They shared the "Print
Completed" / "Print Failed" / etc. short names with the broadcast
provider templates, so the Message Templates list was indistinguishable.
The EVENT_NAMES display map in routes/notification_templates.py already
used the disambiguated "… Email" labels, but the seed wrote the short
name to the DB.
DEFAULT_TEMPLATES now seeds the four user_print_* rows with " Email"
suffix so fresh installs are correctly labelled. New
_migrate_rename_user_print_template_names runs on startup and updates
existing rows where the name still matches the old default. Admin-edited
names are preserved. Standard SQL UPDATE works on both SQLite and
Postgres without dialect branching.
When the printer reports ams_filament_backup=True,
compute_deficit_for_queue_item pools remaining_grams across spools
matching (preset, colour) on the same printer (scoped per extruder on
dual-nozzle) before declaring a per-slot shortfall. Identity is strict:
same slicer_filament preset AND same colour (alpha-normalised). Two
PETG HF spools in different colours are NOT pooled — the firmware would
swap correctly but the print would change colour mid-run. Spoolman side
mirrors the rule via filament.id + color_hex. Backup OFF falls back to
the pre-PR per-slot accounting line-for-line.
8 new test cases in TestFilamentDeficitBackupAware pin pool covers,
pool insufficient, different presets, backup-OFF regression, dual-
extruder side scoping, no-preset never pairs, colour-strict, and
alpha-hex normalisation. The 8 pre-existing test_filament_deficit.py
cases stay green.
feat(printers): AMS Filament Backup modal with BS-style ring per pair
Badge click on the Filaments section header (#1766) now opens a
modal: filament-colour ring per backup pair, material name + rotation
count in the centre, slot labels distributed around the colour band on
contrast-aware pills. Closely modelled on Bambu Studio's Auto Refill
widget. Lone slots are intentionally not listed. R / L badges per ring
when the extruder map carries two distinct values; collapses to no-
badge rendering for single-nozzle printers misflagged as dual.
Esc keypress closes the modal. Theme-aware via CSS variables matching
AMSHistoryModal. computeBackupGroups helper in utils/amsHelpers
defensively dedupes duplicate ams.id entries observed on switch-VP
aggregations.
10 modal render cases pin: Esc closes / unmount nulls the listener /
ring renders for pairs and omits lone slots / R-L badges only when
extruder map has distinct values / empty state / toggle gating.
13 frontend cases pin computeBackupGroups identity rules.
feat(printers): active-print P-N pill on AMS slot tiles during RUNNING
While the printer is mid-print, each AMS slot tile referenced by
status.ams_mapping carries a small "P1 / P2 / P3" pill in the top-
right corner, naming which print-slot is mapped to that AMS slot.
Catches the #1762 comment-2 scenario: a queue job set for "any X1C"
staged to a printer with mismatched filament, no way to verify mid-
print. Same wire data (status.ams_mapping is already on the wire) —
the addition is purely surface.
The existing ring-bambu-green highlight for effectiveTrayNow keeps its
meaning (currently extruding RIGHT NOW); the pill is the per-slot
static assignment for the active print.
chore(scheduler): log Print Anyway short-circuit at INFO
_block_on_filament_deficit logs at INFO when it honours
item.skip_filament_check, so a future "Print Anyway didn't work" report
(third commenter on #1762 hit this shape) has actionable evidence in
the standard support bundle without DEBUG. Bundled because the deficit
fix makes the original symptom disappear for users with backup ON.
Split Obico failure-detection dispatch out of the multiplexed
on_printer_error event onto its own on_ai_failure_detection event so
users can subscribe to AI alerts without also enabling HMS hardware-
error pages, and so the discoverable label "AI Failure Detection" is
what subscribes them rather than the unrelated "Printer Error" toggle.
New column on notification_providers (default False, branched
SQLite/Postgres migration), new notification_service.on_ai_failure_detection
method, new ai_failure_detection template, obico_actions._notify swap.
Frontend gets a summary badge, a toggle row with description, and ntfy
priority surfacing. 14 new tests pin the routing + the regression guard
("Printer Error" alone must NOT receive AI notifications now). 11 locales
covered.
Existing providers keep working: HMS hardware errors continue to ride
on_printer_error unchanged; users who want spaghetti alerts opt in via
the new toggle.
On the FINISH-state fallback path bambu_mqtt.py:3258 dispatches
on_finish_photo_moment and on_print_complete back-to-back, so the
moment-producer's RTSP grab and the print-complete consumer's cache
read race — consumer wins the empty pop, then its own RTSP fallback
times out against the producer's in-flight grab (Bambu printers allow
one RTSP client). 394 KB frame captured, notification went text-only.
Add a per-printer asyncio.Event in _stage22_finish_in_flight: producer
registers before first await, sets it in finally on every exit;
consumer awaits with a 20s timeout (15s producer grab + headroom)
before the cache pop. Closes the race AND the concurrent-RTSP timeout
in one change. Timelapse path skips the event, so its branch is
unchanged.
First-attempt fix (d196cfc5) was wrong about the cause. Real root,
traced via @mkoreen's BAMBUDDY_VP_DUMP_WIRE capture + 2026-06-21
support bundle:
mqtt_server.py:1296 was passing the slicer's bare subtask_name
(e.g. "Model_Name") into on_print_command, which stashed under
that key. _add_to_print_queue looked up under file_path.name
(the FTP filename WITH extension, "Model_Name.gcode.3mf"). The
two strings never matched. pop returned None, the 2s wait fired
against a key the stash side never signaled, every captured
slicer field silently fell back to settings defaults.
Affected EVERY Bambu Studio "Send" upload across EVERY model —
not just H2C nozzle_mapping. bed_leveling / flow_cali /
vibration_cali / layer_inspect / timelapse from the original
#1403 capture have been silently ignored since BambuStudio
started splitting subtask_name (bare) from file (with extension).
Unit tests passed because fixtures called on_print_command with
file_path.name directly, bypassing the broken caller.
Fix in manager.py::on_print_command: derive
stash_key = data.get("file") or filename and use it for both
_slicer_print_options and the event lookup. filename
(subtask_name) still flows unchanged to _schedule_finish_release
— push_status echoes it back as gcode_file / subtask_name and
the slicer matches against its own subtask_name there, so
re-routing that path was a separate regression I caught and
reverted mid-audit.
Also: nozzles_info field was a wrong guess in d196cfc5 —
BambuStudio never sends it (confirmed via wire capture). Drop
the capture, dispatch, schema, kwarg, and route paths. DB
column stays nullable so old rows still load; nothing reads
or writes it.
Diagnostic: DEBUG log when _add_to_print_queue finds no slicer
options after the 2s wait, including the looked-up key and the
actual cache keys present. Future stash/lookup mismatches will
be obvious from a log line instead of needing a wire capture.
Behaviour change worth flagging: users on Bambu Studio whose
slicer-side bed-leveling / flow-cali / vibration-cali /
layer-inspect / timelapse differ from Bambuddy's
default-workflow settings will see their slicer choices
honored now instead of silently overridden. Restores #1403's
original intent.
Reporter @thenewguy runs an engineering farm with one AMS per material
(PLA, ASA, Nylon, PVB, HIPS) — Bambuddy's single global ams_humidity_fair
threshold (default 60%) was driving both the queue / ambient auto-drying
trigger AND the hourly humidity alarm uniformly, which is wrong for
multi-material setups where Nylon wants <10% and PLA is fine at 60%.
Drying RUN parameters were already per-filament via drying_presets;
this commit adds the missing per-filament TRIGGER.
New setting ams_humidity_thresholds — JSON map of filament-type to
threshold percent with a "default" key for unknown / unmapped types.
Empty / unset → both consumers fall back to ams_humidity_fair so the
upgrade is silent.
Resolver lives in PrintScheduler.resolve_humidity_threshold(trays,
thresholds, fallback) — picks the lowest (most-restrictive) threshold
across all loaded tray types, matching the conservative-params strategy
_get_conservative_drying_params already uses for temp / hours. Empty
tray slots contribute no constraint; all-empty AMS falls through to the
"default" key. Filament names normalized to uppercase base (so
"PLA Basic" / "pla basic" both map to PLA).
Two consumer sites rewired through the same resolver so the scheduler
and the alarm path can never disagree about whether an AMS is "too
humid":
- print_scheduler.py::_check_auto_drying — per-AMS humidity comparison
for start / stop / skip decisions.
- main.py AMS sensor / alarm worker — hourly humidity alarm notifier.
UI: new table in Settings → Workflow → Auto-Drying, below the existing
Drying Presets table. Default row + 8 default filament types
(PLA / PETG / TPU / ABS / ASA / PA / PC / PVA) pre-filled from the
current ams_humidity_fair value so the editor starts sensibly.
Input pattern: draft-on-edit / commit-on-blur (transient humidityDrafts
state per row). onChange only updates the draft; onBlur (and Enter)
parses + clamps to [5, 95] + commits. Empty value on blur clears the
override and falls back to default. Caught mid-PR via a typing test:
the naive per-keystroke clamp snapped "3" → 5 before the user could
type the second digit of "30".
Setting is in the public _UI_PREFERENCE_FIELDS allowlist (same rationale
as drying_presets and ams_humidity_fair — non-sensitive integer map,
no SETTINGS_READ permission required for badge-color rendering).
ghcr.io pull baseline (~10k/day rising → ~8-12k active installs) puts
sponsor conversion at 0.08% — roughly an order of magnitude under
industry-benchmark for OSS with visible CTA. The Settings banner from
0d4b9d4e gives passive every-visit visibility on one page; this adds
opt-out-able active visibility at moments where the user has just
earned something with Bambuddy.
Five trigger families with a 14-day cross-family cooldown: prints
(100/500/1000/2500/5000), cost (100/500/1000 tracked filament +
energy), archives (50/250/1000), anniversary (1 year), version-update
(re-armable on each major bump). New sponsor_toast_state table with
nullable user_id so auth-disabled installs get the same trigger logic
through one code path (NULL-keyed install-default row).
New PrinterSensorHistory table + 60s recorder + GET/DELETE /printer-sensor-history
route gated behind a new PRINTER_SENSOR_HISTORY_READ scope (separate from AMS). UI
adds a 10x10 LineChart icon on each heater tile - click body opens the existing
target-temp popover unchanged, click icon opens a HeaterHistoryModal mirroring the
AMSHistoryModal shape (kind toggle + 6h/24h/48h/7d range + current/avg/min/max +
recharts line for value + dashed target). Read-only X1C/P2S chamber tile finally
gets an interaction. Retention configurable via printer_sensor_history_retention_days
(default 30, sibling of ams_history_retention_days). 8 new i18n keys translated in
all 11 locales, parity green. 4 backend + 6 frontend tests added; full pytest -n 30
6226/6226, vitest 2176/2176, ruff/eslint/build all clean.
Reporter forcefully started a print needing ~260 g with 180 g on the
first spool and a backup spool in the AMS. Printer correctly consumed
spool 1, AMS Backup switched, spool 2 finished the print. Bambuddy
attributed all 260 g to spool 2 -- spool 1 untouched in inventory.
Two stacking bugs produced the exact "all to second spool" symptom for
prints without per-layer 3MF gcode data:
1. bambu_mqtt.py:2135 wrote state.total_layers = int(data["total_layer_num"])
unconditionally. P1S firmware pushes total_layer_num=0 at print end
(same reset pattern other models do for layer_num / progress). The
unconditional write clobbered the slicer's actual total to 0 before
the usage tracker read it.
2. usage_tracker.py:1129-1137 linear-fallback dumped EVERYTHING onto the
last segment when total_layers was 0:
if total_layers > 0:
segment_grams = total_weight * (seg_end_layer - seg_start_layer) / total_layers
else:
segment_grams = 0.0 # <- entire print weight ends up on last segment
Path 2 (AMS remain% delta) couldn't recover because (a) the emptied
spool reported remain=-1 and (b) Bug-A had already added the second
spool's key to handled_trays, suppressing the Path 2 lookup.
Fix:
- bambu_mqtt.py: only overwrite state.total_layers when the incoming
value is positive (mirror of the existing _last_valid_layer_num
pattern at line 2127). Explicit reset on new print start at
_handle_print_start so the previous print's total can't bleed in.
- usage_tracker.py: cascade the linear-fallback denominator -
state.total_layers, then last_layer_num (already threaded in for
the last_progress fallback), then equal-split as a bounded fence.
Equal-split is still wrong but never dumps the whole print on the
last segment, which was strictly worse.
Two tightly-coupled deliverables in one drop -- a new AMS Filament Backup
status/control surface, and the #1766 fix that depends on it.
Added -- AMS Filament Backup status + control
- Parse bit 18 of top-level print.cfg into PrinterState.ams_filament_backup
on every push_status. Verified against OrcaSlicer source
(DeviceManager.cpp:4961) and a live H2D ON/OFF capture. Tri-state
(None = A1 family / pre-cfg push) preserves today's behaviour.
- Hold-timer guard (3 s) prevents stale frames from flickering the badge
back to the printer's old cfg after a user-initiated toggle.
- POST /printers/{id}/ams-backup toggle, set_ams_filament_backup() client
method calling _set_print_option("auto_switch_filament", enabled).
- GET /printers/{id}/inventory-remain endpoint exposes the same map the
dispatcher uses (internal and Spoolman modes both work uniformly).
- Small icon badge in the printer card's "Filaments" section header
(placement reads as printer-wide because the cfg bit is printer-wide,
not per-AMS). Click to toggle, success toast.
- 5 i18n keys x 11 locales for the badge UI.
Fixed -- #1766: prefer_lowest didn't pick lowest, ignored backup state
- Backend gate in _compute_ams_mapping_for_printer: coerce prefer_lowest
to False when status.ams_filament_backup is False; log the skip.
- New effectivePreferLowest(setting, backup) helper applied at every
frontend sort entry point: single-printer PrintModal, multi-printer
hook per-printer, PrinterSelector InlineMappingEditor, FilamentMapping
standalone editor (the last had NO preferLowest awareness at all
before this change).
- New preferLowestSortKey(f, inventoryByTrayId) mirrors backend's two-tier
key exactly, including the banding tie-break (regular AMS < AMS-HT <
external) so the client-side pre-compute matches the dispatch-time pick.
An earlier draft used a flat `amsId * 4 + trayId` priority which gave
external slots (ams_id = -1) a NEGATIVE priority -- caught in code
review before commit.
- Settings -> Filament -> "Prefer lowest remaining filament" gets an
explanatory note about the printer-side AMS Backup dependency, with
i18n key in all 11 locales.
The 3MF parser sums prediction + weight across every plate (#1593) so the
archive card can headline the whole project — correct for the card, wrong
for the completion notification of a single plate. The queue UI already
re-reads the 3MF per-plate at print_queue.py:272-285; mirror that for the
notification path so Discord / Pushover / email show the plate's actual
duration and grams instead of the project sum. Helper fails open on every
error path so a missing or corrupt 3MF can't block the notification.
BambuStudio's project_file MQTT command for O1C2 (the H2C dual-
nozzle-rack variant) carries nozzle_mapping (per-filament physical
nozzle position IDs) and nozzles_info (per-extruder rack metadata).
The VP intake was dropping both, so the H2C firmware fell back to
"last matching nozzle type" auto-pick and ignored the user's
slicer choice — every HF print landed on R2, every standard print
landed on R4.
Carry both fields through the VP intake → queue item → MQTT
dispatch path. New nullable TEXT columns on print_queue, non-
branched ALTER (matches ams_mapping / filament_overrides
precedent). Dual-nozzle gate at start_print() keeps the fields
off single-nozzle dispatches. Fail-open on malformed JSON —
firmware auto-picks, never worse than pre-fix.
Stamps both fields on every plate in the multi-plate Send All
loop (#1697 / #1188 precedent).
ams_mapping2 still handles H2D/X2D dual-extruder routing
unchanged; this fix is scoped to the O1C2 rack-swap mechanism.
Bambuddy's archive cards were blank for every print sliced through the
BS or Orca docker sidecars. The "Some recent prints couldn't be archived
with thumbnails" banner pointed at install step 4 which is unrelated —
that flag only fires on FTP-fetch failures, not on missing-thumb in the
sliced 3MF.
Root cause is upstream of Bambuddy: neither slicer CLI renders
Metadata/plate_N.png when invoked headlessly with --slice --export-3mf.
That render is a separate code path triggered by --export-png, which is
mutually exclusive with --export-3mf and additionally needs a working
display backend (BS 02.07.x's bundled GLFW is hard-locked to Wayland —
even XDG_SESSION_TYPE=x11 + GDK_BACKEND=x11 + QT_QPA_PLATFORM=xcb don't
switch it back). An Xvfb display in the sidecar wouldn't help even if we
wired the second-pass call. The Orca sidecar has been silently shipping
thumbnail-less 3MFs from STL inputs since launch; nobody noticed.
Fill the gap on the Bambuddy side: new plate_thumbnail.py renders the
missing thumbnails after the slice returns. inject_plate_thumbnails_if_missing
parses the sliced zip, finds every Metadata/plate_N.gcode entry that
doesn't have a matching plate_N.png, loads 3D/3dmodel.model via trimesh,
renders an isometric Bambu-green-on-dark view at 512x512 + 128x128 via
the same matplotlib Agg pipeline as stl_thumbnail.py, and re-packs the
zip with the PNGs injected. Visual style matches Bambuddy's existing
library thumbnails — archive cards stay consistent inside Bambuddy rather
than chasing parity with desktop Studio's plate render. Best-effort:
input bytes are returned unchanged on any failure so the slice flow itself
can never fail because of a missing thumbnail. Idempotent: re-running on
an already-injected 3MF returns the input verbatim.
Wired into both library.py slice paths via result._replace; covers the
cross-class merged-multi-plate path automatically (merged bytes flow into
the same write site). No sidecar Dockerfile change required — an earlier
attempt to install Xvfb in Dockerfile.bambu-studio was a false start and
is not part of this drop.
Dependencies: trimesh's 3MF loader uses networkx (scene-graph traversal)
and lxml (model.xml parse) lazily inside the 3MF code path — both added
to requirements.txt because they aren't strict trimesh transitives.
maziggy