check_queue() read the plate-clear setting with _get_bool_setting(default=True),
but SettingsSchema.require_plate_clear defaults False and the whole frontend
treats a missing value as off. Since _get_bool_setting returns its default when
no DB row exists, installs that never saved the setting enforced the plate-clear
gate the UI showed as disabled — FINISH-state printers never dispatched and no UI
control existed to clear awaiting_plate_clear. Read the setting with default=False
so the enforced behavior matches the schema and the toggle. Both defaults shipped
together in #752; this aligns them.
get_network_interfaces() only sent Windows to the psutil path; macOS fell into
the Linux ioctl branch, whose SIOCGIFADDR/SIOCGIFNETMASK ioctls are Linux-only.
macOS/BSD have fcntl but different ioctl numbers, so every call raised OSError
and the function returned an empty list — the VP bind-interface dropdown showed
nothing. Route all non-Linux platforms through the cross-platform psutil path.
External cameras in HTTP-snapshot mode failed to load with a repeating
"connection lost" when the endpoint served PNG/WebP/BMP stills instead of
JPEG (common on IP cameras and reverse-proxied snapshot URLs). The URL
rendered fine directly in a browser, but Bambuddy's MJPEG stream wraps
every part in a hard-coded Content-Type: image/jpeg boundary, so a
non-JPEG payload labelled as JPEG made the browser reject the frame and
tear down the whole multipart/x-mixed-replace stream.
_capture_snapshot now transcodes non-JPEG stills to JPEG via OpenCV
(already a dependency). Genuine JPEG snapshots keep a byte-for-byte fast
path; truly undecodable responses (HTML error pages, auth redirects) fall
back to the previous raw-return behaviour with a single clear warning
instead of a per-frame log flood.
Native (non-Docker) installs launched uvicorn without --loop asyncio, so
uvicorn[standard] auto-selected uvloop. uvloop's SSL layer drops
already-received but still-buffered data when the client closes the data
connection without a TLS close_notify while the reader is flow-control
paused on slow storage. cmd_STOR writes each chunk to disk inside the read
loop, so a slow consumer falls behind, the tail is lost, read() returns a
clean EOF, and the loop exits with no exception -- the server acked 226 for
a file it truncated itself, then archived, queued, and forwarded the corrupt
3MF to the real printer.
Fix in two independent layers:
1. Remove the trigger: add --loop asyncio to every native launch path,
matching the Dockerfile -- deploy/bambuddy.service, install/install.sh
(systemd + launchd), spoolbuddy/install/install.sh, the Windows NSSM
service, README, CONTRIBUTING dev command.
2. Defense in depth (loop-independent): cmd_STOR now validates that a
received .3mf opens as a ZIP (reads the central directory, no
decompression) before replying 226. A truncated/corrupt file is dropped
and answered with 426, and on_file_received never runs -- so a broken
upload surfaces as an immediate slicer-side send error instead of being
archived and pushed to the printer. Scoped to .3mf; other filetypes pass
through unchanged.
PROJECTS_CREATE/UPDATE/DELETE were in _APIKEY_DENIED_PERMISSIONS with no
entry in _APIKEY_SCOPE_BY_PERMISSION, so every project mutation returned a
generic 403 for any API key regardless of granted permissions -- the same
regression class as archives (#1888) and library (#1832).
Add a per-key can_manage_projects scope. Project routes gate on plain
PROJECTS_* (no OWN/ALL split), so all three CRUD permissions map to the one
scope; membership edits (add-archives) gate on PROJECTS_UPDATE and are
covered. PROJECTS_READ is unchanged (already under can_read_status).
Column defaults TRUE for new keys; existing rows backfill to FALSE so the
upgrade never silently widens scope. Migration is BOOLEAN (SQLite + Postgres
safe), verified on fresh SQLite and Postgres 17. Bundled SpoolBuddy kiosk key
set to False. Settings API-key UI gets a Manage Projects toggle + Projects
badge; 11-locale i18n. RBAC scope matrix + drift guards extended.
Auto-drying stopped manually started (and pre-restart) AMS drying cycles
after exactly 30 minutes. The already-drying branch in _check_auto_drying()
applied a humidity-based auto-stop despite its own "track but don't stop"
comment, and the humidity re-check is unreliable: RH drops steeply in heated
air, so the sensor reads ~15-20% within minutes of the dryer starting even
with saturated filament. humidity <= threshold was thus effectively always
true, and the _min_drying_seconds=1800 floor pinned the stop to the 30-minute
mark. This also truncated Bambuddy's own preset-duration dries.
Remove the humidity-based early-stop entirely: a running dry now runs to its
configured duration (firmware stops it). Scheduling stops (print priority,
queue no longer needing the dry) are unchanged via _stop_drying(). Drop the
now-unused _min_drying_seconds.
The print-queue "auto off after this job" trigger used a second, inline
auto-off implementation (main.py, print_scheduler.py, print_queue.py)
that hardcoded wait_for_cooldown(50C, 600s) — ignoring each plug's
configured off_delay_mode / off_delay_minutes / off_temp_threshold — and
ignored the return value, powering off on the 600s timeout regardless of
print state. A print that failed and was reprinted from the touchscreen
got its power cut mid-print. The inline tasks were also uncancellable, so
a reprint couldn't abort a pending off.
Consolidate all three into SmartPlugManager.schedule_off_after_queue_job,
which schedules via the plug's configured strategy (shared with
on_print_complete through _schedule_off_per_mode) and is cancellable via
_pending_off. Add printer_manager.is_print_active() and guard the actual
power-off in _delayed_off and _temp_based_off so no path cuts power on a
loaded print. Move the on_print_start cancellation ahead of the auto_on
gate so a reprint always aborts a pending off.
DELETE /api/v1/archives/{id} rejected every API key with 403
"API keys cannot be used for administrative operations", regardless of
the print's owner or the key's scopes. ARCHIVES_DELETE_ALL/_OWN (and the
create/update variants) were on the denylist and absent from the scope
allowlist, so require_ownership_permission fell through to the generic
admin-denied 403 — the whole archive-management surface was unreachable
for API keys. Same regression class as the #1832 library/maintenance
carve-outs.
Add a can_manage_archives per-key scope: ARCHIVES_CREATE, ARCHIVES_
UPDATE_OWN/_ALL and ARCHIVES_DELETE_OWN/_ALL move from the denylist to
the allowlist under it (OWN and ALL fold into the same scope, matching
can_manage_library). ARCHIVES_PURGE stays admin-only — it drops the
print's Quick Stats contribution, mirroring LIBRARY_PURGE. Column
defaults TRUE for UI-created keys; existing rows backfill to FALSE so the
upgrade never silently widens scope. Bundled SpoolBuddy kiosk key stays
minimally scoped (False). Migration is dialect-agnostic and verified on
fresh SQLite and Postgres 17.
Adds the Settings API-key toggle + badge (11-locale i18n) and extends the
RBAC scope matrix to cover all five archive-management permissions.
Three bugs on the same PLA-model + PVA-support flow, discovered in
sequence:
(A) substitute_unused_plate_filaments inspected only object geometry
(per-object extruder metadata + paint_color triangles) so a support-
only slot was silently treated as "unused" and the user's PVA profile
got overwritten with slot 1's PLA.
(B) _extract_filament_info stripped filament_is_support==1 entries,
hiding PVA from unsliced source archive cards even when the project
explicitly configured it.
(C) --load-settings is authoritative over the source's project_settings.
config, and Bambu's shipped process presets ship enable_support=0
(supports are a per-print decision, not per-quality). So even with
(A) fixed, the sliced output had supports disabled and the PVA slot
loaded but never consumed. Inverts BambuStudio GUI's semantics where
the project overrides the preset.
Fixes:
- New extract_support_filament_slots_from_3mf reads enable_support +
support_filament + support_interface_filament from project_settings.
config; substitute_unused_plate_filaments unions it into the geometry-
derived set.
- _extract_filament_info returns all configured filament types + colours.
- New _patch_process_support_settings overlays four fields (enable_
support, support_filament, support_interface_filament, support_type)
from the source 3MF onto the picked process preset JSON before
--load-settings sees it. Deliberately targeted to what fixes#1881
without widening to a full project-over-preset merge.
Reporter (H2C + macOS 26.5.1 + BS 2.8.0.50): after every Mac sleep/wake
cycle, Bambu Studio couldn't see the VP or connect to it. Only fix was
quit BS + reboot Bambuddy. The physical printer's own cloud/LAN link
recovered in ~5 s from the same sleep — the delta was in VP session
handling.
Log evidence (bug-report-assets/logs/ddf1ede75df045cd94ad223d0f08f88a):
- 14:04:06 healthy `1Hz status push: 60 pushes/min to :54698`
- 14:04:06 → 14:09:16: five minutes of SSDP-only, no push summary for
:54698, no OSError, no disconnect line
- 14:09:16: new source port :54861 connects and authenticates fine —
the server was not rejecting reconnects
- 14:10:17 first DEBUG line: `MQTT drain timeout for
device/…/report — client may be busy` — smoking gun
Root cause: `_publish_to_report:1149` caught `asyncio.wait_for(drain,
timeout=5)` TimeoutError at DEBUG and returned silently. TimeoutError
is not OSError, so the push loop's `except OSError` at :441 never saw
it — the zombie writer sat in self._clients until the kernel's default
TCP keepalive detected the dead peer (Linux default: ~2 h 11 min).
Two hunks:
1. `_publish_to_report`: on drain TimeoutError, close the writer (best
effort, catch Exception so an already-broken close() doesn't mask
the raise) and raise BrokenPipeError, which IS OSError. Push loop
evicts on the same tick.
2. `_handle_client`: after SO_KEEPALIVE=1, set TCP_KEEPIDLE=60,
TCP_KEEPINTVL=15, TCP_KEEPCNT=4 — dead-peer detection in ~2 min
instead of ~2 h. `getattr(socket, ...)` guards keep it cross-
platform (macOS uses TCP_KEEPALIVE not TCP_KEEPIDLE, other kernels
may not expose all three — skip whichever is missing).
What I got wrong first pass and corrected on log-read: hypothesised
"missing MQTT session takeover on same client_id". Wrong. _handle_connect
parses the protocol client_id but discards it (assignment commented out
at :762), and self._clients is keyed on `f"{addr[0]}:{addr[1]}"` (socket
peer), so every reconnect gets a distinct key. No takeover race exists.
The log fixed this: the "not seen" symptom is BS-side (macOS UDP
receive after sleep + BS holding the pre-sleep socket state), but the
server-side amplifier was the zombie writer.
Non-proxy VP mode hardcoded the camera-passthrough TCPProxy to
listen_port=322 / target_port=322 regardless of the target printer's
model. That port is correct for RTSPS models (X1/X2/H2/P2S), but A1 /
A1 Mini / P1P / P1S use Bambu's proprietary chamber-image protocol on
port 6000. Result: A1/P1 targets got a 322 listener with no upstream,
OrcaSlicer Liveview failed with [2:-10061], BambuStudio's camera button
timed out.
Reporter confirmed a raw socat forwarder `<VP-IP>:6000 → <P1S-IP>:6000`
restored the stream — the target camera works, the VP just wasn't
publishing it.
Proxy mode was unaffected because SlicerProxyManager already opens 6000
(nominally file-transfer; Bambu reuses the port for chamber-image), so
the passthrough coincidentally works there.
Fix: read the target's model from
`printer_manager.get_client(target_id).model` at the same point we read
target_ip, then use `get_camera_port(target_model)` — the same source of
truth as routes/camera.py — to pick 322 or 6000. Model comes from the
physical printer, NOT self.model (the VP's spoofed identity has no
bearing on how the real device serves its camera).
Renamed the log tag from "RTSP" to f"Camera-{camera_port}" so support
bundles show which protocol the VP is fronting at a glance. Kept the
_rtsp_proxy attribute name to keep the diff tight; the block comment
spells out that it doubles as chamber-image passthrough on A1/P1.
A1 Mini firmware skips stg_cur=22 entirely, so the finish-photo fallback
fires at gcode_state=FINISH — which runs AFTER Bambu Studio has already
executed the user's End G-code. Users with SwapMod plate-swap injected
into End G-code always got a photo of the swapped (empty) plate.
Add a layer_num >= total_layer_num edge trigger in _parse_print_data so
the pre-capture fires the moment the last object layer completes, on
every printer variant. Guarded by the existing _finish_photo_captured
one-shot so stage-22 and FINISH-state hooks become no-ops for the same
print — no framing regression on AMS printers without custom end G-code.
usage_tracker's tray-switch split has never had a Spoolman peer.
An AMS same-material runout switch mid-print charged the whole slot
to the origin spool via the (via tag) path and double-credited the
backup via remain-delta — origin exceeded initial_weight.
Extract the segment-math into utils/tray_split.compute_tray_split_grams
and call it from both writers so the two inventory backends attribute
mid-print switches identically. spoolman_tracking gains
_report_spool_usage_split_by_tray_changes; the Path 2 remain-delta
fallback now skips trays the split path covered, killing the
double-count.
Carve MAINTENANCE_CREATE/UPDATE/DELETE out of the admin denylist so
HA automations can log "cleaned nozzle" / reset a counter via API key
without granting broader printer control. Follows the same shape as
can_manage_library and can_manage_inventory: new column, allowlist
entry, UI checkbox, wiki row, RBAC test coverage.
Distinct backfill: these perms were EXPLICITLY denied for every API
key before this change (no existing integration relies on them), so
existing rows migrate to FALSE — no silent scope widening on upgrade.
New keys default to TRUE, matching the safe-on-by-default pattern.
Bundled SpoolBuddy kiosk key gets False explicitly (kiosk doesn't need it).
P1S has an enclosure door but no hall sensor for it; P1P has no
enclosure at all. Both models were rendering a permanent green
"Door Closed" chip driven by bit 23 of the stat field, which stays
0 forever on that firmware. Whitelist now covers only models that
actually ship with a door sensor: X1 family, X2D, P2S, and H2 family.
Corrected the matching stale comments in the PrinterStatus TS
interface (client.ts) and PrinterState dataclass (bambu_mqtt.py).
Backend parse left as-is — cheap and future-proof if Bambu ever
wires the P-series enclosure into a sensor.
get_setting_detail and delete_setting were hitting
/v1/iot-service/api/slicer/setting/{id} without the version query
parameter Bambu Cloud requires — every call returned HTTP 400
"field 'version' is not set". The sibling plural GET
(get_slicer_settings) has always sent it; the comment above
_SLICER_API_VERSION documents the contract for the endpoint subtree.
Missed when the placeholder landed in the 2026-05-12 compliance rework.
Downstream effect: slicer_filament_resolver.resolve_slicer_filament's
PFUS branch swallowed the 400, fell through to normalize_slicer_filament,
and caller inventory.py generic-material-fell-back tray_info_idx to
GFL99/GFG99. BambuStudio's AMS panel reads the printer's tray_info_idx
echo, so the user saw "Generic PLA" instead of the custom cloud preset.
Masked for 50 days by two rescue paths in the caller: prior-slot
tray_info_idx reuse, and stored spool_k_profile → live state.kprofiles
realign. Reporter's spool 54 → tray 2 assign had neither.
Adjacent surfaces also fixed by the same two-line change: the delete
cloud preset UI route, the whole update_setting flow (get_setting_detail
→ delete_setting → POST), preset_resolver's cloud branch, and three
UI-facing cloud.py routes that fetch setting detail.
get_setting_detail also includes the truncated response body in the
raised BambuCloudError so the next contract change is self-diagnostic
from support-bundle logs.
Symptom: user queued a batch of 10 prints, pressed Cancel on a pending
row, the print started anyway. Repeated consecutively. Support bundle
also showed 15x "sqlite3.OperationalError: database is locked" from the
sensor history recorder in the same 8-minute window.
Root cause is a check-then-act race in _start_print. check_queue takes
a snapshot of pending items, then _start_print does FTP delete + FTP
upload (5-30s) before the unconditional item.status = "printing";
db.commit() at line 2792. /cancel commits status='cancelled' in a
separate session during that window; the scheduler's stale in-memory
write overwrites it and start_print ships. The lock-contention finding
is the same shape from a different angle: _start_print did
await db.flush() at line 2555 (after item.archive_id set + library_file
delete) which opens the SQLite WAL writer lock and holds it through
the FTP upload, queueing every concurrent writer behind it including
the user's own cancel commit.
Three guards layered:
1) Atomic CAS at the pending->printing transition. UPDATE print_queue
SET status='printing', started_at=NOW() WHERE id=:id AND
status='pending'. rowcount==0 means user won; log abort, best-effort
delete_file_async the file we just FTP'd up so it doesn't leak into
the printer's BambuStudio file picker, send queue_item_failed WS
event with reason="cancelled_mid_dispatch", return without calling
printer_manager.start_print.
2) Early db.refresh(item) + bail right after the printer connectivity
check. Saves the wasted FTP upload when the row was already
cancelled before _start_print resumed. Defense in depth; guard 1
catches the same case at the CAS point.
3) flush -> commit before the FTP block. The library-file-to-archive
promotion's writes commit cleanly, WAL writer lock releases, sensor
history and concurrent cancels stop queueing behind the scheduler.
The flush-not-commit pattern was rolling back a pointer to an
already-committed archive row, so the new behaviour matches reality
(archive committed, pointer committed, FTP unblocked).
New scheduler stage that heats the bed (and the chamber, on supported
printers) and holds at temperature before each queued print starts —
the heat-soak engineering filaments need for adhesion and warp
control. Bambuddy waits between FTP upload and start_print, so the
soak runs while the printer is otherwise idle. M191 is silently
ignored by Bambu firmware, so doing this at the orchestration layer
is the only place it works.
Resolution order at dispatch:
1. PrintQueueItem.preheat_override ∈ {inherit, on, off}.
'off' skips entirely; 'inherit' falls back to the global
preheat_enabled toggle; 'on' forces the stage even when the
global is off.
2. chamber_target = item.preheat_chamber_target_override
?? max(filament_map[normalize(t.tray_type)] for loaded slots)
?? 0.
Mixed PA+PLA picks PA's 50 (max-across-slots — PA's chamber
requirement is binding, PLA doesn't suffer being warm). PLA-only
derives 0 and skips the chamber phase automatically.
3. Three hardware tiers for chamber heat:
- Active chamber heater (H2C/H2D/H2D Pro/H2S/X2D/X1E) → M141 +
chamber-sensor wait
- Chamber sensor only (X1C/P2S) → no M141, passive bed-radiation
wait with hard max-wait cap
- No chamber sensor (P1S/P1P/A1/A1 Mini) → bed + soak timer only
4. Airduct flap (H2C/H2D/H2D Pro/H2S/X2D/P2S) auto-switches to
match the chamber target — heating mode for engineering
filaments, cooling mode for PLA. Bambu firmware does NOT
auto-switch the flap with M141, so without this an ABS print
on a previously-cooling flap fights the open exhaust, and a
PLA print on a previously-hot flap recirculates ABS heat.
Idempotent: only fires set_airduct_mode when current ≠ desired.
Settings → Workflow → Queue & Dispatch → Preheat & Heat Soak card:
master enable toggle (default off — disabled installs see no change),
per-filament chamber-target editor (replaces a single global int that
shipped in the first cut and couldn't serve PA + PLA in the same
config), preheat_max_wait_seconds, preheat_soak_seconds. The Print
Options panel in PrintModal gets a Preheat sub-section with the
tri-state Inherit/On/Off control and an optional chamber-target
override input.
DB migration: PrintQueueItem gains preheat_override VARCHAR(10)
DEFAULT 'inherit' and preheat_chamber_target_override INTEGER NULL.
Idempotent via _safe_execute. Existing rows behave exactly as before
the migration.
Best-effort throughout: printer drops, refused M141 or set_airduct,
missing bed temp, lost MQTT state mid-wait all log and return cleanly.
Normal upload + start path runs after this returns regardless.
The HMS error modal had three compounding bugs that surfaced when a
user forced a wrong-plate HMS (0500_8051) and tried to dispatch the
per-fault actions.
(1) IGNORE_RESUME did not ignore. Bambuddy redirected the action on
state=PAUSE to a plain `resume` command, citing a #1830 verdict that
BambuStudio's "err-bearing shape" was firmware-silently-rejected.
BambuStudio source disagrees: DeviceErrorDialog.cpp:600 dispatches
IGNORE_RESUME via command_hms_ignore, whose wire shape is
{command:"ignore", err:"<decimal>", param:"reserve", job_id:...}.
That's a distinct command from `resume` — the firmware suppresses
the next re-check AND auto-resumes in one operation. Plain resume
means "re-check normally", which is exactly why the wrong-plate
detection re-fired 1-2 s after the user clicked Ignore. The #1830
"err-bearing shape rejected" test almost certainly sent the err as
a hex shortcode; BambuStudio passes std::to_string(int m_error_code)
i.e. the DECIMAL form, which is what the firmware matches against.
(2) Action buttons read as inert badges. The button className used
`hover:${buttonHoverColor}` — a template-literal interpolation
Tailwind's JIT scanner can't see as a literal string, so the
per-severity hover utility never reached the compiled CSS. Same
bg/text color as the severity badge above and no border made it
read as another label. No disabled state and no spinner during the
2.5 s ack wait left clicks sitting silently inert.
(3) Ack-detection 502'd on legitimate ack. The route compared
(gcode_state, hms_errors-len) before vs after publish; wrong-plate
re-pause round-tripped both fields to their pre-publish values
inside the 2.5 s window → false 502 even though the firmware fully
ack'd. PROBLEM_SOLVED_RESUME working but IGNORE_RESUME 502'ing on
the same fault was the same race resolving differently.
Fixes:
bambu_mqtt.py — new hms_ignore_command() publishes the BambuStudio
shape; existing hms_ignore(persistent) renamed to hms_idle_ignore
(unchanged shape, used by NO_REMINDER_NEXT_TIME per
DeviceErrorDialog.cpp:588). Dispatch routes IGNORE_RESUME,
IGNORE_NO_REMINDER_NEXT_TIME, and DONT_REMIND_NEXT_TIME to
hms_ignore_command (BambuStudio routes all three to the same
command_hms_ignore — the "don't remind" half is the firmware's
job). NO_REMINDER_NEXT_TIME stays on hms_idle_ignore type=0. Hex →
decimal err conversion at the helper layer with a defensive
fallback. job_id=None → empty string (matches BambuStudio's
std::string default).
HMSErrorModal.tsx — getSeverityInfo loses the dead buttonHoverColor
field. Action button uses static
`bg-white/10 hover:bg-white/20 active:bg-white/30 text-white
border border-white/20`, wires
`disabled={!hasPermission||mutation.isPending}`, and renders
`<Loader2/>` only on the button whose (action,print_error) matches
mutation.variables.
printers.py — ack-detection probes `client._last_message_time`
(bumped on every MQTT push regardless of payload) rather than
diffing state fields. The pushall that follows every command
guarantees a fresh push lands inside the 2.5 s window on any
healthy printer; only firmware-silent-drop leaves the timestamp
untouched, which is the 502 path #1830 wanted.
Two compounding bugs let an H2C-bound filament land in slot 1 of an A1
slice silently. (1) `_slicer_rejection_message` discarded the actual CLI
diagnostic - `filament preset Generic PLA @BBL H2C (slot 1) is not
compatible with printer Bambu Lab A1 0.4 nozzle.` - when the sidecar's
headline error_string was Bambu Studio's catch-all
`The input preset file is invalid and can not be parsed.` placeholder.
The real reason was in the stdout `[error] run NNNN:` line, trimmed off
before reaching the SliceJob's error_detail. (2) `pickFilamentForSlot`
used a soft `-100` mismatch penalty rather than a hard skip, leaving
the "never auto-fill an incompatible preset while a compatible one
exists" contract implicit. The unused-slot substitution in
`substitute_unused_plate_filaments` then propagated whatever slot 1
held across every unused slot - one bad pick poisoned the array.
(1) Mine `[error] <msg>` (with or without `run NNNN:`) from the full
pre-trim response; substitute the placeholder, keep meaningful
headlines. (2) Partition candidates into compatible/unknown vs
mismatch; prefer compatible whenever the bucket is non-empty, fall
back to mismatch only on graceful-degrade. Picker helpers moved out
of `SliceModal.tsx` into `utils/slicePresetPicker.ts` so the modal
file stays component-only (react-refresh lint).
P1S and other Bambu printers tick layer_num during the pre-print calibration
sequence (homing -> auto bed leveling -> bed-surface scan -> nozzle clean ->
purge / wipe), so a bare `2 <= layer_num <= 5` gate fires the first-layer
notification minutes before the first real extrusion. The attached photo
shows a lowered bed, parked toolhead, and a clean plate -- exactly the
state during PREPARE, not after layer 1.
The reporter's log timeline made it explicit:
- 13:54:27 PRINT START detected
- 14:10:13 [SNAPSHOT] Capturing fresh frame (notification fires here)
- 14:44:28 gcode_state: RUNNING (debug log, only visible because they
enabled debug logging mid-print)
So the notification went out ~30 minutes before the print actually started.
Fix in main.py:6043 -- the on_layer_change first-layer block now requires
both:
- state.state == "RUNNING" (gcode_state is RUNNING, not PREPARE)
- state.mc_print_sub_stage in (None, 0)
(0 = "Printing" in the canonical STAGE_NAMES at bambu_mqtt.py:376;
None preserved as a no-opinion fall-through for any firmware that
doesn't push the sub-stage so unknown-firmware installs keep
their existing behaviour)
_first_layer_notified is only set after the gate passes, so calibration
ticks are non-consuming -- the next on_layer_change edge fires the
notification once the printer is actually printing.
The trigger window widens from [2, 5] to [2, 10] so that if calibration
consumed several layer_num slots before RUNNING, the deferred edge
still falls inside. The RUNNING + sub-stage gate ensures we don't fire
on a stale layer count.
Administrators system group sync
- Fresh installs already bootstrap with ALL_PERMISSIONS, so they always have
every permission. Upgrades previously only got what one-off backfill blocks
in seed_default_groups() explicitly listed (library:purge, archives:purge,
the OWN/ALL read-flag block, orca_cloud:auth, pipelines:*). Any Permission
enum member added without a matching block silently stayed missing on
existing admin rows. The most recent gap was printer_sensor_history:read
(Sensor History charts returned 403 for upgraded admins).
- seed_default_groups() now syncs Administrators to ALL_PERMISSIONS on every
startup: append every Permission value that isn't already on the row.
Additive only -- hand-added custom permissions are preserved.
- The pure-admin one-off backfills (library:purge / archives:purge block,
the OWN/ALL + orca_cloud:auth + legacy-read-flag block, the Administrators
branch of the pipeline backfill) are retired since the sync subsumes
them. Non-admin backfills (Operators / Viewers OWN-tier reads, Operators
orca_cloud:auth, pipelines for non-admin groups, makerworld:*, clear_plate
cross-group adders) are untouched.
- Tests: test_administrators_printer_sensor_history_read_backfilled
(regression for the reported gap),
test_administrators_sync_covers_every_current_permission (generic
invariant -- any future new permission lands on admin without needing
a one-off test), test_administrators_sync_is_additive_only (custom
permissions preserved). 12/12 backfill-migration + 102/102 broader
permission tests green; ruff clean.
Pipelines runs dashboard
- PipelineRunsPage.tsx: the Pipeline / Status / Target filter row's three
native <select> elements are replaced with a bambu-themed FilterDropdown
(button trigger, floating menu, optgroup-style headers for the Target
picker, hover + selected states with a check mark, closes on outside
click and Escape). Same value/onChange contract -- visual only.
- SlicerPipelinesPanel.tsx: wrap list?.pipelines ?? [] in useMemo so the
reference is stable when the data is stable. Fixes the
react-hooks/exhaustive-deps warning where the inline fallback returned
a fresh empty array every render, invalidating both downstream useMemo
caches (target-options + filtered-pipelines list).
PR A/B turned the slice modal's preset bundle into a one-click dispatch
with a pinned target printer. PR C closes the original issue: operators
type in a number of copies, Bambuddy slices once and distributes prints
across a fleet per the pipeline's chosen fanout strategy. A new dashboard
surfaces every run with filters, expandable per-copy status, cancel,
and retry-failed-copies. WS pushes keep everything live.
Backend
- copies field on POST /run, capped by new pipeline_max_copies setting
(default 50, hard cap 1000). PipelineRun.parent_run_id chains retries.
- SlicerPipelineUpdate accepts target_kind (specific_printer /
printer_class), target_model_class, fanout_strategy.
- Eligibility matcher branches: class-targeting enumerates matching
Printer rows, runs per-printer checks via a status_lookup closure,
returns printer_reports[]. New issue kinds: no_class_matches,
class_not_set.
- _pick_assignments distributes copies per strategy:
- max_parallel: target_model set, printer_id None — scheduler picks
- round_robin: copy i → eligible[i % N], fixed printer_id
- fill_one_first: all copies pinned to eligible[0]
All three reuse the slice-once path through slice_dispatch.enqueue.
- New routes:
- GET /pipeline-runs (paginated, filterable by pipeline + status)
- POST /pipeline-runs/{id}/retry-failed (creates child run with
copies = failed+cancelled count, parent_run_id set)
- Cancel cascades to all N queue entries (only pending/queued)
- _roll_up_run_status computes run-level status from per-job statuses;
introduces partial_failure for "some completed, some failed".
- ws_manager.broadcast_to_user emits pipeline_run_updated on every
state transition with the full materialised response.
Frontend
- Pipeline editor: target_kind radio + class picker (filtered to
installed models) + fanout-strategy radio. Read-only row shows
"X1C · Round robin" for class pipelines.
- RunWithPipelineModal: copies number input bounded by
settings.pipeline_max_copies. Accepts class-targeted pipelines.
- Settings → Workflow → Queue & Dispatch: new "Slicer Pipeline limits"
card with the max-copies input.
- New /pipelines/runs dashboard page (sidebar entry, gated on
pipelines:read). Two-filter dropdown, 25-per-page pagination, per-row
expandable to job list, Cancel + Retry-failed buttons.
- useWebSocket case for pipeline_run_updated invalidates both
pipeline-runs-all and pipeline-runs/{id} query keys.
Two real gaps from the PR B drop:
1. Run-with-pipeline only existed in the file manager. Operators who keep
working files in archives had to copy them to the library to use a
pipeline.
2. Triggering a slice via a pipeline produced a silent multi-second-to-
minute wait. The manual SliceModal flow shows the sticky
"Slicing X - Generating G-code 75%" persistent toast; the pipeline
path went through asyncio.create_task directly and never registered
with SliceJobTracker.
Archive entry point
- POST /slicer-pipelines/{id}/check-eligibility and /run accept
source_archive_id as an alternative to source_library_file_id (XOR,
enforced by Pydantic validator).
- PipelineRun.source_archive_id is a new nullable FK column with the
ALTER TABLE migration in run_migrations (idempotent via _safe_execute,
works on SQLite + Postgres).
- _resolve_source branches: archive path reads source_3mf_path with
fallback to file_path, mirroring routes/archives.py.
- ArchiveCard's context menu picks up a "Run with pipeline" item next to
Slice (only on source archives), gated on useSlicerApi + pipelines:run.
Slice (only on source archives), gated on useSlicerApi + pipelines:run.
- Path-safety: SEC-PATH-OK markers added at both LibraryFile.file_path
and archive.source_3mf_path join sites, citing the upload-time
validators.
Progress toast
- Pipeline orchestration is now the `run` callable of a
slice_dispatch.enqueue call — the same dispatcher SliceModal uses —
instead of a bare asyncio.create_task. The SliceJob lifecycle drives
the existing progress toast end to end with no separate notification
surface for pipeline runs.
- PipelineRun.slice_job_id is set before the 202 returns.
- RunWithPipelineModal calls useSliceJobTracker().trackJob() from
runMutation.onSuccess.
- RunWithPipelineModal source prop is now {kind, id, filename}
mirroring SliceModal.SliceSource; api.checkPipelineEligibility +
api.runPipeline take a discriminated-union source argument.
The SliceModal forces the user to pick four slots every time (printer /
process / filament(s) / bed type). For fleet production that's tedious
and error-prone. Pipelines let an operator save a named bundle and apply
it with one click on the next file.
PR A is bundle-and-management only. PR B adds single-target dispatch,
PR C adds multi-copy batch with capability-matched fanout. Future-PR
columns (target_kind / target_printer_id / target_model_class /
fanout_strategy) ship in this migration so PR B+ is code-only, not a
schema bump.
Backend
- New model SlicerPipeline + slicer_pipelines table; soft-delete via
is_deleted so PR B+ run history can still resolve metadata.
- Pydantic schemas reuse the existing PresetRef shape from
schemas/slicer.py.
- CRUD routes at /api/v1/slicer-pipelines/ — list (newest first by id
DESC), create (201), get-by-id, partial PUT, soft-delete (204).
- Three new permissions: PIPELINES_READ / PIPELINES_WRITE / PIPELINES_RUN.
Administrators + Operators get all three; Viewers get READ.
Backfill in seed_default_groups() so existing installs upgrade
cleanly. All three denied to API keys for now.
Frontend
- Settings → Workflow splits into two horizontal sub-tabs mirroring
the Authentication tab pattern: "Queue & Dispatch" (existing
Workflow content) and "Pipelines" (new). URL deep-link via
?tab=queue&sub=pipelines.
- SlicerPipelinesPanel — list, inline rename, delete, stale-preset
warning when a referenced preset no longer resolves.
- SliceModal gets "Apply pipeline ▾" + "Save as pipeline". Apply
fills all four slot states; the filament list right-pads from
current state so a pipeline with fewer entries than the current
source's slot count keeps the existing tail.
FTP push to the printer into the server-side scheduler tick. That
removed the browser-side upload the old XHR-progress modal listened
to — users only saw the queue item flip to "active" with no visibility
into the FTP push + the H2D/H2D Pro 80-210 s project_file digestion
window before the printer actually started.
Port the legacy bg-dispatch toast rendering from
0b43ac0d:frontend/src/contexts/ToastContext.tsx lines 510-650 back in
place verbatim — same DOM tree, same Tailwind classes, same
formatFileSize bytes line, same uppercase status chip, same collapse
chevron, same awaitingPrinter derivation, same auto-dismiss. The only
adapt is the event ingestion: a useEffect maps the four scheduler-side
WS events to the legacy DispatchToastJob shape.
The toast materializes when the FTP push to the printer ACTUALLY
STARTS (queue_item_uploading) — NOT on POST /queue. A draft that
fired at queue-add made the toast jump to "Dispatched" before any
upload had happened.
Four backend WS events drive it: uploading (carries printer_name +
total_bytes), upload_progress (throttled at 200 ms / 256 KB to match
legacy background_dispatch.py:614-615 1:1, first call always emits,
completion always emits; an _UploadProgressBridge bridges from the
FTP executor thread to the asyncio loop), acked (printer transitioned
out of pre_state), failed (with a reason key the toast looks up as
dispatchToast.failed.{reason}). No queue_item_dispatched event: the
legacy path kept status=processing from upload start until printer
ack, "Awaiting printer..." derives from upload_progress_pct >= 99.9
(legacy uploadDoneAwaitingPrinter trick).
Per-user routing: WS connect resolves the principal username to
User.id once and stashes it on websocket.state, so
ws_manager.broadcast_to_user filters O(connections). Auth-disabled
installs route user_id=None to all connections — matches the legacy
single-user behaviour. The watchdog receives created_by_id through a
new kwarg so the static method can still emit acked without
re-fetching the queue item.
extract_nozzle_mapping_from_3mf has a single-active-extruder shortcut
(added in #851 for #827) at threemf_tools.py:354 that runs before the
per-filament group_id mapping. It fires whenever
extruder_nozzle_stats reports exactly one extruder as active. On
multi-nozzle Bambu printers (H2D / H2D Pro / X2D / H2C) the slicer
under-reports the second extruder when its nozzle volume-type isn't
enumerated in the slice's profile (common with HT-AMS / High-Flow
asymmetric setups, e.g. HT-AMS feeding the right nozzle on an H2D):
['Standard#1', 'Standard#0'] even when both extruders are genuinely
used. sum(active_extruders) == 1 → every filament was force-assigned
to physical_extruder_map[active_idx], the authoritative group_id was
discarded, and the Filament Mapping panel showed both filaments
badged L with the auto-match hard filter blocking the wrong-nozzle
tray as "Type not found".
Bug is parser-side and model-agnostic, not gated on AMS hardware —
typical dual-AMS H2D slices contain ['Standard#1', 'Standard#1']
(sum==2), never enter the shortcut, and work fine. Physical extrude
routing was not affected (gcode + project_file nozzle_mapping path
from #1780 is authoritative). User-visible harm: wrong L/R badge and
no auto-match for the second nozzle.
Gate the shortcut on len(distinct_group_ids) <= 1 from
slice_info.config. The slice_info parse is hoisted above the shortcut
and reused by Priority 1, so the gate adds zero extra I/O. The gate
only narrows the shortcut — it can't widen the bug onto any
previously-working slice. Generalizes to H2C and any N-nozzle printer
for free (no per-printer branching).
require_ownership_permission gates API keys on `all_perm` only — the
comment at auth.py:1659 says OWN and ALL "both map to the same scope
flag" for queue / archives / etc., so checking `all_perm` is the
correct gate. Library deliberately broke that: LIBRARY_UPDATE_OWN /
LIBRARY_DELETE_OWN mapped to can_manage_library, but the ALL variants
were in _APIKEY_DENIED_PERMISSIONS. Result — every API-key request to
DELETE /library/files/{id}, PUT /library/files/{id} (rename), or
POST /library/files/move hit "administrative operations" 403, even
for keys with can_manage_library=True. Only slice worked, because it
doesn't go through require_ownership_permission.
The "ALL stays admin-only because it crosses the user boundary"
intent was internally inconsistent. API keys have no per-row
ownership identity (user=None), so the route's
`file.created_by_id != user.id` ownership check would AttributeError
on a key acting under OWN anyway — the only working path is
can_modify_all=True, which `all_perm` denial blocked outright.
Fix folds LIBRARY_UPDATE_ALL and LIBRARY_DELETE_ALL into
_APIKEY_SCOPE_BY_PERMISSION under can_manage_library, matching the
can_queue precedent (QUEUE_UPDATE_OWN and QUEUE_UPDATE_ALL both
map to can_queue for the same per-key-identity reason). Both removed
from _APIKEY_DENIED_PERMISSIONS. LIBRARY_PURGE stays denied — it
bypasses the soft-delete window and is genuinely destructive.
Three distinct bugs combined into one user-facing failure: clicking
Stop / Problem-solved-and-resume / Ignore-and-resume returned 200 OK
but the printer didn't act, modal stayed up, print stayed paused.
Verified by injecting candidate command shapes on device/<sn>/request
against a live H2D paused on a wrong-plate HMS (print_error=0x05008051).
(1) hms_resume / hms_stop dispatched the "err"-bearing shape that
BambuStudio doesn't actually send; Bambu firmware silently rejects it.
Both now send the plain shape ({"print":{"command":"<x>","param":"",
"sequence_id":"0"}}). PAUSE -> FAILED in 1.7s for stop, PAUSE -> RUNNING
in <2s for resume.
(2) IGNORE_RESUME mapped to idle_ignore, which is BambuStudio's
"dismiss a warning" command and only works for non-pause warnings.
hms_ignore now branches on state.state == "PAUSE": paused -> plain
resume; not-paused -> idle_ignore with the full-length err.
(3) 64-bit hms[]-array faults were truncated to a non-matching err.
short_code in _parse_status discarded 32 of the 64 identifier bits, so
the firmware didn't match it to the active fault. HMSError.full_code
now carries the canonical hex identifier (16 chars for hms[] faults,
8 chars for print_error faults). Catalog lookup tries 16-char first,
falls back to 8-char. HmsActionBody.print_error pattern relaxed to
^[0-9A-Fa-f]{8}([0-9A-Fa-f]{8})?$.
(4) execute_hms_action returned publish-success as success, masking
every silent-rejection bug above as 200 OK. Route now snapshots
(state.state, len(state.hms_errors)) before dispatch, awaits
HMS_ACTION_ACK_WAIT_SECONDS (default 2.5s, module-level so tests
override), and returns 502 with "Printer did not acknowledge HMS
action within 2.5s" if state didn't move.
The toast was calibrated for power users — lowest bars were 100 prints,
50 archives, 100 cost. Most installs never crossed any of them, especially
with the install base ~doubling since March. Matomo confirms: only 4
prints-100 and 3 archives-50 deeplink visits to /sponsors.html in a 7-day
window despite tens of thousands of weekly pulls.
Adds lower thresholds without changing priority order or cooldown:
PRINT_MILESTONES = (10, 25, ...)
ARCHIVE_MILESTONES = (5, 10, ...)
COST_MILESTONES = (25, 50, ...)
Existing toast copy uses {count}/{total} interpolation in all 11 locales,
so no i18n changes. Tests rebalanced so "below the floor" still tests
with the new floor; new test_fires_at_lowest_threshold pins prints-10.
streams when one viewer closes
1) Offline tiles now show OFF (not LIVE)
CameraWall.modeByPrinter assigned 'live' to any visible printer
without considering status.connected, so a disconnected X1C wasted
a live-budget slot AND rendered the red LIVE chip on top of the
WifiOff placeholder. Disconnected printers now map to 'paused' and
don't decrement liveBudget — the existing WifiOff + Off chip
rendering takes over.
2) /camera/stop no longer kills other viewers' streams
The cam-wall tile, EmbeddedCameraViewer, and the /camera/:id popup
all subscribe to the same fan-out broadcaster for a printer.
/camera/stop used to unconditionally shutdown_broadcaster() + kill
every ffmpeg process for the printer, so closing the embedded viewer
while the cam-wall tile of the same printer was live force-killed
the source the tile was pulling from — the tile's <img> errored.
New get_subscriber_count(key) accessor in camera_fanout.py exposes
the broadcaster's subscriber list length. /camera/stop now reads
that first; when >= 1 subscriber is still attached, return
{stopped: 0, skipped: true} and leave the broadcaster + ffmpeg
processes alone. The leaving viewer's HTTP teardown still runs the
natural iter_subscriber.finally -> unsubscribe path, so its slot is
released; the broadcaster keeps serving the other viewers. Single-
viewer close still hits the immediate force-teardown (count is 0).
Three issues from the post-merge audit of the unified-dispatch PR, all
pre-existed on dev but became more impactful once every print routes
through the queue:
1. Start/Stop ownership gates. /queue/{id}/stop required QUEUE_UPDATE_ALL
(admin-only) -- operators saw the Stop button in the queue UI but got
403 on click. /queue/{id}/start required QUEUE_UPDATE_OWN with no
ownership check -- _OWN holders could start anyone's queue items via
direct API. Both routes now use require_ownership_permission, mirroring
/cancel. Stop is strict (rejects unowned items for _OWN); start preserves
#1670's VP-import flow where _OWN can start NULL-owner items and claim
ownership at click-time. Frontend QueuePage Start/Stop buttons flip
from printers:control to canModify('queue', 'update', created_by_id).
2. TOCTOU race on insert_position. Concurrent ASAP inserts to the same
scope both computed MAX(position) from before the other committed; in
an empty scope, both inserted at position=1 (duplicate). Wraps the
read+update in a transaction-scoped Postgres pg_advisory_xact_lock
keyed on the printer_id. Different printers don't contend. SQLite
serializes writes implicitly so the path is no-op there. Dialect is
checked against the live session binding, not the is_sqlite() helper,
because the test fixture overrides get_db to SQLite while
settings.database_url still points at Postgres.
3. /reorder duplicate-position validator. POST /queue/reorder set position
from the payload in a loop with no uniqueness validation -- a buggy
drag-drop client could leave the queue with ambiguous ordering (the
scheduler's ORDER BY (printer_id, position) ties break by row order).
New model_validator on PrintQueueReorder rejects duplicates at the
schema layer with 422 + "Duplicate positions in reorder request: [N, ...]".
The /system/appliance endpoint is fetched by the SPA's i18n bootstrap on
mount to seed locale, hostname, timezone, and the chrony NTP-gate state
BEFORE any login state exists. The route handler itself has no auth
dependency and the test_route_auth_coverage allowlist correctly marks it
public, but the global auth_middleware in main.py — which short-circuits
every /api/ path not in PUBLIC_API_ROUTES — was never told about it.
Result: every browser session on an auth-enabled install logged a 401
on the appliance endpoint before login.
Added /api/v1/system/appliance to PUBLIC_API_ROUTES with a comment
pointing at the dual-list pattern so this doesn't drift again, and a
regression test in TestAuthMiddlewarePublicRoutes that posts /auth/setup
to turn auth on, then asserts the endpoint returns 200 with the
documented shape (hostname / timezone / locale / time_synced fields all
present).
Adds a global local_login_enabled setting plus a per-provider
is_autologin flag on OIDCProvider so operators who run their own SSO
enabled, or if the calling admin has no UserOIDCLink — either would
lock everyone out. App-layer invariant: at most one provider can carry
is_autologin; setting it on one clears it on every other.
/auth/advanced-auth/status surfaces both new fields so the LoginPage
decides UI in one query. The env-var bypass flips the reported
local_login_enabled back to true so the SPA matches what the route
will accept.
Bambu's per-tick AMS push carries only the dry_time countdown — the
filament name and target temperature the user chose are never echoed on
the wire. The AMS card had no source of truth for them and rendered the
bare "Drying · 11h 35m left". The badge now shows
"Drying · PETG @ 65°C · 11h 35m left", matching the cycle the user
actually started.
BambuMQTTClient caches {ams_id: {filament, temp}} on send_drying_command
(mode=1), clears on mode=0 and on the dry_time falling edge to 0 — the
same per-AMS edge detector that drives the smart-plug-after-drying
callback. PrinterManager.get_drying_targets exposes it, the four
printer_state_to_dict call sites thread it through, AMS schema gains
dry_target_temp + dry_filament, and routes/printers.py builds the same
fields into the manually-constructed AMSUnit response.
When no cached target exists (drying started in a previous backend
lifetime, or initiated outside Bambuddy), the badge falls back to the
first loaded tray's tray_type + RFID-recommended drying_temp — the
heuristic the popover already uses to seed defaults.
i18n: printers.drying.targetSummary = "{{filament}} @ {{temp}}°C" in
all 11 locales. Parity check 5356 leaves per locale.
Note: a user reported the H2D's own physical display still labels the
cycle by the loaded tray's filament (e.g. "PLA" instead of the
Bambuddy-requested "PETG"). The wire payload is correct end-to-end —
journalctl shows filament: "PETG" sent and result: success ACKed — and
the badge in Bambuddy's own UI now reflects what we actually sent,
independent of the firmware's display choice.
Continue Auto-Drying while a print is running on capable hardware.
New Settings > Print Queue > "Continue drying while printing" toggle
(default OFF). Extends _check_auto_drying in print_scheduler.py to
evaluate running printers when supports_drying_while_printing(model,
firmware) returns true. Strict allowlist verified per Bambu wiki
release notes for "Print While Drying" / "printing while filament is
drying": H2D 01.03.00.00+, H2C/H2S/P2S/H2D Pro 01.02.00.00+, X2D/A2L
01.01.00.00+, X1C 01.11.02.00+. P1*, A1, A1 Mini, X1 (non-C), X1E
intentionally excluded. Mid-print drying temperature is capped at
max(40, preset_temp - 5) to protect spools from heat damage inside the
hot enclosure during a print, matching Bambu's own "lower drying
temperature during printing" guidance.
Rotate-spool toggle in the drying popover is now disabled when any tray
in the targeted AMS has filament threaded into the feed tube
(tray.state === 11). The whole AMS rotates as one mechanism, so a
single loaded slot locks the entire unit. Previously the toggle was
always clickable and the firmware rejected with dry_sf_reason=[3]
(ConsumableAtAmsOutlet) after the click. The first cut keyed on the
printer-level tray_now but missed the H2D's typical post-print state
where tray_now resets to 255 while filament stays in the tube — the
per-tray state field reports it correctly. Submission also clamps
rotateTray off so a stale-true state from a previous AMS can't leak
through.
Backend: supports_drying_while_printing in printer_manager.py covers
display names and internal SSDP/MQTT codes (O1D, O1E/O2D, O1C/O1C2,
O1S, N6, BL-P001, N7, N9). New print_drying_enabled boolean in
settings schema. Frontend: toggle on SettingsPage, gate + clamp on
PrintersPage drying popover using existing amsData cache. i18n: 3 new
keys x 11 locales, no English fallback. Tests: 7 cases on the gate
matrix (TestSupportsDryingWhilePrinting), 4 cases on the scheduler
mid-print path (TestMidPrintDrying), 9 cases on the rotate gate state
transitions. Full backend pytest -n 30 green (4251/4251), ruff clean,
frontend npm run build clean, i18n parity 5355 leaves per locale.
fix(db): order filament_shopping_list color_name ALTER after CREATE
PR #1814 added ALTER TABLE filament_shopping_list ADD COLUMN color_name
before the CREATE TABLE IF NOT EXISTS for that table. On fresh installs
the ALTER hit "no such table" — not in _safe_execute's swallow list —
and aborted run_migrations, breaking every migration test that starts
from a fresh DB. Moved the ALTER to after the CREATE on both SQLite and
Postgres branches; the CREATE already declares color_name, so this is
purely the upgrade path and "duplicate column name" on re-runs is
swallowed.
Reprints triggered a bogus "Print Stopped" push notification while the print
kept running, surfaced by the reconciler synthesising a missed PRINT COMPLETE
on MQTT reconnect.
bambu_mqtt:3647 mints a fresh subtask_id per dispatch. On reprint, the
on_print_start expected-archive promotion only wrote subtask_id when the
stored value was empty (`not archive.subtask_id`) — so the archive kept the
FIRST run's id. On the next MQTT reconnect, reconcile_stale_active_prints
(#1542) compared the stale stored id against the printer's live id, found
a mismatch, and synthesised a status="aborted" PRINT COMPLETE — which fires
the "Print Stopped" notification.
Captured cleanly in the reporter's support bundle:
[RECONCILE] Printer 1: synthesising missed PRINT COMPLETE for archive 31
— subtask_id changed ('1844213296' → '2103771517')
immediately followed by gcode_state: RUNNING on the same wire.
Fix: update archive.subtask_id whenever the new effective id differs from
the stored one, not only when the stored one is empty. Inequality check
preserves the noop-on-stable-push behaviour the original guard provided.
Two places in main.py (expected-print and duplicate-printing-archive
branches). 3 new unit tests cover the reprint, first-run, and stable-push
paths. Reconciler itself unchanged — it was doing the right thing given
the data it had.
Brings the Spoolman writer up to parity with the internal-inventory
side, which has had this fallback since #1119. When a Bambu print
starts without a retrievable .gcode.3mf on the printer (typically an
unsaved BambuStudio project, subtask_name='Untitled'), Spoolman no
longer silently skips the print's filament consumption.
- ActivePrintSpoolman.filament_usage now nullable; new tray_remain_start
column captures per-slot {remain, tray_uuid} at print start.
- store_print_data: always snapshots remain, even when 3MF is present
(mirrors usage_tracker.on_print_start), so partial-3MF prints can also
fall back per-slot.
- report_usage: 3MF path stays primary; new _report_remain_delta_for_slots
handles slots the 3MF didn't cover via delta * Filament.weight / 100,
resolving the spool via the existing slot-assignment table.
- _report_partial_usage: same fallback for aborted no-3MF prints.
#1119 invariant preserved: per-slot, per-print, gated on a valid
start/current remain AND a resolvable Spoolman spool. Uses curated
Filament.weight (not MQTT's unreliable tray_weight) — same trick the
internal-inventory side uses.
Mid-print spool swap detected via tray_uuid mismatch → slot skipped.
Double-charge prevented via handled_global_tray_ids dedup.
The 7cb905a follow-up mounted the global unknown-tag modal listener, which
turned an existing always-on broadcast for no-tag slots from a silent no-op
into a perpetual popup loop — every push for a slot with a generic
non-RFID spool (or zero-filled tag) re-prompted, and confirming each one
created a fresh ghost spool with an empty tag.
- main.py on_ams_change: drop the no-tag else-branch broadcast. No identity,
no prompt; the slot stays unassigned until a real tag is read.
- inventory.py + spoolman.py /spools/from-slot: 400 when the slot has no
usable tag_uid / tray_uuid so stale frontends can't recreate the ghost
spool by re-confirming a queued prompt.
- test_inventory_from_slot_no_tag: lock the guard in (zero-filled + empty
string).
SpoolBuddy "Assign to AMS" with a Bambu Cloud user preset (PFUS) left
Bambu Studio showing "Generic <Material>" instead of the user's
custom preset. Root cause: the defensive filter that catches
PFUS/PFCN leaks into tray_info_idx also cleared setting_id —
but PFUS/PFCN are VALID setting_id values, just not valid
tray_info_idx values. When the cloud detail lookup didn't return
a filament_id (cloud unauth on the on_ams_change replay path,
transient failure, or older custom presets), both fields got
cleared and the caller's generic-material fallback overwrote
setting_id with GFSG99 — slicer resolved to Generic PETG.
Fix: the filter still clears tray_info_idx for PFUS/PFCN/material-
name leaks, but preserves setting_id when it's a valid slicer
reference (PFUS / PFCN / GFS). Material-name leaks still clear
both. Post-fix MQTT carries tray_info_idx=GFG99 (firmware-acceptable
for HMS/drying/colour) AND setting_id=PFUS<hash> (slicer uses this
to load the actual user preset).
What stays the same: Bambuddy's own AMS card still displays
the generic material on cloud-unauth paths — same fundamental
limitation as today. Fixing that needs a deeper layered fallback
(LocalPreset name match, printer kprofile query, cloud-detail
cache) and is out of scope for this drop. Slicer-side fix is
the reporter's explicit ask.
H2S firmware reports tray_now=0 (the AMS's idle slot) throughout
external-spool prints instead of 254 like X1C/P1S/A1 do, so the
single-nozzle branch's 0-3 passthrough landed state.tray_now on slot
0 — UI highlighted AMS SLOT 1 instead of the external spool.
Usage credit was unaffected (#1276 covers that via ams_mapping).
The single-nozzle branch now checks _captured_ams_mapping (slicer-
captured per-filament mapping that the request-topic intercept
already tracks) before the existing P2S multi-AMS resolver. When
every entry is -1, the print uses ONLY the external spool, so
state.tray_now is promoted to 254.
Narrow on purpose: AMS-only [5] and mixed [5, -1] are NOT
overridden — we have no evidence H2S misreports mid-print swaps, and
trusting the firmware preserves correctness for users with multi-
filament setups. No-mapping prints (printer-screen start) fall
through unchanged.
Single failure on a printer with require_previous_success queue items
permanently skipped every downstream + every new item — the
_check_previous_success lookback always walked back to the original
failed row (skipped is excluded from the lookback), and no code path
could dismiss that failure.
Three pieces:
1. PrintQueueItem.gate_acknowledged Boolean column (default False).
SQLite/Postgres-safe ALTER, dialect-branched DEFAULT.
2. _check_previous_success skips rows where gate_acknowledged=True so
acknowledged failures walk past the lookback. Fresh post-resume
failures still gate independently.
3. POST /api/v1/queue/printer/{printer_id}/resume — gated on
QUEUE_UPDATE_ALL — acknowledges failed/aborted items for that
printer AND restores items where
status='skipped' AND error_message='Previous print failed or was
aborted' back to pending in one transaction. Returns
{acknowledged, restored}.
Frontend banner above the active Queue tab surfaces blocked printers,
fires a warning-variant ConfirmModal, and shows a precise toast on
success.
Round 2 (166e9f9e) fixed the stash-key mismatch, but @mkoreen's
2026-06-23 bundle showed BS's MQTT project_file arrived 85 ms past the
2.0 s wait timeout (FTP done 00:42:02.509, "No slicer options cached"
00:42:04.509, MQTT 00:42:04.594). Queue item was committed with
settings defaults; nozzle_mapping never made it onto the wire.
Three pieces:
1. _SLICER_OPTIONS_WAIT_TIMEOUT module constant, 2.0 -> 5.0 s. Covers
wireless / loaded-Pi jitter; one-time +3 s cost only for legacy
slicers that never send MQTT.
2. _RECENT_QUEUE_ITEM_TTL fallback: on_print_command retroactively
UPDATEs slicer-driven fields on a recently-committed queue item
when the event wait already gave up. Tracked via
_recent_queue_items dict (30 s TTL, evicted on every queue-add).
Gated on status='pending' so we never race the dispatcher.
Multi-plate covered via WHERE id IN (...).
3. Post-commit last-chance pop. Audit caught a race in (2): MQTT could
arrive during any await inside _add_to_print_queue (wait_for,
archive_print, db.flush, db.commit), and on_print_command would
stash data with no event consumer AND no _recent_queue_items entry
yet. After populating _recent_queue_items, _add_to_print_queue now
pops _slicer_print_options[file_path.name] one last time and
routes any hit through _restamp inline.
maziggy