Two tightly-coupled deliverables in one drop -- a new AMS Filament Backup
status/control surface, and the #1766 fix that depends on it.
Added -- AMS Filament Backup status + control
- Parse bit 18 of top-level print.cfg into PrinterState.ams_filament_backup
on every push_status. Verified against OrcaSlicer source
(DeviceManager.cpp:4961) and a live H2D ON/OFF capture. Tri-state
(None = A1 family / pre-cfg push) preserves today's behaviour.
- Hold-timer guard (3 s) prevents stale frames from flickering the badge
back to the printer's old cfg after a user-initiated toggle.
- POST /printers/{id}/ams-backup toggle, set_ams_filament_backup() client
method calling _set_print_option("auto_switch_filament", enabled).
- GET /printers/{id}/inventory-remain endpoint exposes the same map the
dispatcher uses (internal and Spoolman modes both work uniformly).
- Small icon badge in the printer card's "Filaments" section header
(placement reads as printer-wide because the cfg bit is printer-wide,
not per-AMS). Click to toggle, success toast.
- 5 i18n keys x 11 locales for the badge UI.
Fixed -- #1766: prefer_lowest didn't pick lowest, ignored backup state
- Backend gate in _compute_ams_mapping_for_printer: coerce prefer_lowest
to False when status.ams_filament_backup is False; log the skip.
- New effectivePreferLowest(setting, backup) helper applied at every
frontend sort entry point: single-printer PrintModal, multi-printer
hook per-printer, PrinterSelector InlineMappingEditor, FilamentMapping
standalone editor (the last had NO preferLowest awareness at all
before this change).
- New preferLowestSortKey(f, inventoryByTrayId) mirrors backend's two-tier
key exactly, including the banding tie-break (regular AMS < AMS-HT <
external) so the client-side pre-compute matches the dispatch-time pick.
An earlier draft used a flat `amsId * 4 + trayId` priority which gave
external slots (ams_id = -1) a NEGATIVE priority -- caught in code
review before commit.
- Settings -> Filament -> "Prefer lowest remaining filament" gets an
explanatory note about the printer-side AMS Backup dependency, with
i18n key in all 11 locales.
external-spool extruder routing (#1257)
X2D with 0 AMS units and two external spools (Ext-L feeding left
extruder, Ext-R feeding right) showed "Required filament type not
found in printer" even when the matching filament was physically
loaded. Cause: useFilamentMapping derived dual-nozzle status from
ams_extruder_map being non-empty -- that map is populated from AMS
info bits, so dual-nozzle printers without AMS got an empty map
and hasDualNozzle=false. External spools then fell through to
extruderId=undefined, and the nozzle-aware filter rejected every
candidate because undefined !== 0/1.
Prefer the hardware-reported printerStatus.nozzles array length as
the dual-nozzle signal -- populated regardless of AMS configuration
-- and keep the ams_extruder_map branch as fallback for older
firmware that might not surface nozzles. Affects all dual-nozzle
printers running without AMS: X2D, H2D, X2 Pro.
Regression test pins both layers the bug straddled --
buildLoadedFilaments extruderId assignment per external spool, and
computeAmsMapping picking the correct external for a per-nozzle
requirement -- so a future change that re-breaks either fails CI.
The FTS routes any AMS slot to either extruder, so AMS info reports
bits 8-11 = 0xE (uninitialized) and ams_extruder_map ends up empty.
The print modal's per-nozzle dropdown filter then hides every loaded
slot, leaving the user with an empty filament dropdown.
Detection: parse print.device.fila_switch from MQTT push_status into a
new FilaSwitchState dataclass on PrinterState; surface it through the
GET /printers/{id}/status response as a nullable FilaSwitchResponse.
Frontend: useFilamentMapping and FilamentMapping skip the per-extruder
filter when fila_switch.installed is true. Slots currently fed into a
track display an [L]/[R] routing badge in the dropdown so the user
can see where the FTS is currently routing them.
Tests: 4 backend unit (TestFilamentTrackSwitchDetection), 2 backend
integration (status route), 2 hook regression, 2 component regression.
When multiple AMS spools match the same type/color criteria, an optional
setting now prefers the spool with the lowest remaining filament. This
helps consume partial spools before starting new ones. Sorting applies
to all matching paths: queue scheduler, print modal, and multi-printer
mapping. Unknown remain values (-1) sort to end.
All filament mapping dropdowns (single-printer, multi-printer, and
"Print to Any" model-based) showed only the base material type (e.g.
"PLA") without distinguishing subtypes like "PLA Basic" vs "PLA Matte",
making entries with different subtypes but same color look identical.
Backend: Add tray_sub_brands to available-filaments response and include
it in the dedup key so different subtypes of the same color appear as
separate entries.
Frontend: Show tray_sub_brands in FilamentMapping, FilamentOverride, and
PrinterSelector dropdowns, falling back to base type when unset. Add
traySubBrands field to LoadedFilament interface.
Backend:
- Add dual external spool support for H2D (vt_tray as list: Ext-L/Ext-R)
- Add cloud filament ID map endpoint (/cloud/filament-id-map)
- Fix RFID spool data erased by periodic AMS updates (skip tag matcher
for RFID-tagged trays)
- Fix AMS slot config overwrites RFID spool state
- Fix K-profile selection corrupts existing profiles on X1C/P1S
- Resolve K-profiles filament name via cloud filament ID map
- Update print scheduler and usage tracker for dual external spools
Frontend:
- Add printer model filtering to ConfigureAmsSlotModal (cloud/local/builtin
presets filtered by @BBL model suffix and compatible_printers)
- Add pre-population for configured slots (preset, color, K-profile)
- Add K-Profiles view with accurate filament name resolution
- Internationalize all ConfigureAmsSlotModal strings (en/de/fr/it/ja — 21 keys)
- Add 5 new ConfigureAmsSlotModal tests (model filtering, pre-selection,
color pre-population, i18n)
- Update PrintersPage for dual external spool rendering
Docs:
- Update CHANGELOG, README, website features, and wiki AMS docs
Dual-nozzle H2D/H2D Pro: filament matching now respects nozzle assignments
from the 3MF file. Each AMS unit feeds a specific nozzle (L/R), and the
scheduler/frontend constrain matching to only trays on the correct nozzle.
Falls back to unfiltered matching when no trays exist on the target nozzle.
L/R badges shown in the filament mapping UI. Translated in en/de/ja/it.
Fix AMS slot config overwritten on startup: on_ams_change unconditionally
unlinked BL spool assignments on every MQTT pushall, then re-assigned them
sending ams_filament_setting without setting_id — clearing the printer's
filament preset. Now compares spool RFID identifiers before unlinking.
Fix BL spool detection false positives: removed tray_info_idx from detection
logic in both backend is_bambu_lab_spool() and frontend isBambuLabSpool().
Third-party spools using Bambu generic presets had GF-prefixed tray_info_idx
values, causing misidentification. Now uses only tray_uuid and tag_uid.
SQLite WAL mode with 5s busy timeout reduces "database is locked" errors.
AMS-HT global tray ID was calculated as ams_id * 4 (= 512 for unit 128)
but AMS-HT uses the raw ams_id directly since it has a single tray.
The backend misidentified 512 as an external spool, producing wrong
ams_mapping2. Fixed in 4 locations: frontend getGlobalTrayId(), backend
start_print() ams_mapping2 builder, print scheduler, and Spoolman tracking.
When multiple AMS trays have the same filament type and color, Bambuddy
now uses the tray_info_idx attribute from the 3MF file to identify the
exact spool selected during slicing. This ensures the correct tray is
used rather than just picking the first match.
Matching priority: tray_info_idx > exact color > similar color > type-only
Closes#245
maziggy