The flame-icon onClick on PrintersPage computed popover position as a
fixed { top: rect.bottom + 4, left: Math.max(8, rect.right - 240) }
with no viewport-overflow check. The flame icon sits at the bottom of
the AMS info section on the printer card, so on most realistic viewports
rect.bottom + 4 + popover_height (~320px) overruns viewport.height and
the popover renders partially or entirely off-screen with the Start
button unreachable. Reporter (kleinweby, P1S + AMS-HT) worked around it
via DevTools to confirm the popover was actually there, just clipped.
Extract a computePopoverPosition() helper in utils/popoverPosition.ts:
- defaults to below + right-aligned to the trigger (preserves the
original visual layout when there's room),
- flips ABOVE the trigger when below would overflow AND above fits,
- stays below in the degraded case (popover taller than the viewport) —
at least the top is visible and the user can scroll inside the
popover; flipping to a top-clipped position would lose the action
buttons too,
- clamps the left coordinate so a trigger near either viewport edge
can't push the popover off-screen horizontally either.
Both PrintersPage callsites (the compact AMS row at :3498 and the
dual-nozzle layout at :4011) route through the helper.
This is part 1 of #1447. The functional drying bug — printer receives
the ams_filament_drying MQTT command, ACKs it, but never starts/stops
drying on Bambuddy's request while the printer's own touchscreen works
— is NOT addressed here. Diagnosing it needs the printer's actual
response payload (whether result: "fail" and the specific reason code),
which bambu_mqtt.py:918 currently doesn't log for ams_filament_drying.
Punted to a follow-up where I'll extend the existing extrusion_cali_* /
ams_filament_setting payload-logging path at :919-920 to cover
ams_filament_drying too, ask the reporter to retry, and fix the
command side based on what the printer actually returns.
PrintCalendar.tsx had three instances of the same UTC-shortcut anti-pattern:
1. Bucketing input dates via `date.split('T')[0]` — gives the UTC day
while the cell tooltip rendered local via `toLocaleDateString`. Same
data, two renderers, only one was tz-correct. Reporter on CDT (UTC-5)
saw evening prints jump to "tomorrow's" cell.
2. Per-cell lookup key built via `day.toISOString().split('T')[0]`. The
`day` Date objects produced by the calendar-generation loop are
local-tz (constructed via `new Date()` + `setDate`), so `toISOString`
shifted them back to UTC before the lookup — would have re-broken the
join even after the bucketing fix.
3. "Today" ring comparison used `new Date().toISOString().split('T')[0]`
too — at 23:00 local the ring would have moved to UTC-tomorrow's cell.
Fix adds a `localDateKey(input: string | Date): string` helper to
utils/date.ts that wraps parseUTCDate and formats via the local-tz
getters (`getFullYear` / `getMonth` / `getDate` with two-digit padding),
returning a stable comparable YYYY-MM-DD. PrintCalendar.tsx uses it in
all three spots so the buckets, the cell join, and the today ring share
the same local-tz axis as the user's tooltip label.
Backend stays UTC. Bucketing is a presentation concern and the browser
already knows the user's tz.
Stragglers flagged for follow-up: StatsPage.computeDateRange builds
dateFrom/dateTo for backend stats queries using getUTC* getters, so a
"this week" picked at 23:00 local on Sunday in CDT sends UTC-Monday-based
ranges to the backend. Fixing it properly also needs the backend to
filter on a tz-shifted UTC range, and Bambuddy has no user-tz setting
model today. localDateKey is in place for reuse when that work lands.
Two regressions reported in #1336:
1. spoolMatchesQuery did not include spool.id in the predicate, so
typing a numeric Spoolman ID into the Assign Spool dialog or the
Inventory page search returned no matches. Predicate now also
tests String(spool.id).includes(q).
2. The Unassign button in the spool edit modal was permanently
disabled for Spoolman-mode spools. The modal only ever queried
the legacy spool_assignments table (keyed by spool_id), but in
Spoolman mode the assignment lives in spoolman_slot_assignments
(keyed by spoolman_spool_id). Both the lookup query and the
unassign mutation now branch on the spoolmanMode prop and call
the Spoolman-flavored endpoints.
Create/Edit User modal previously had no hint about backend password
complexity, and the FE pre-check was only length>=6 — so any weak
password got bounced as a bare "HTTP 422" toast after the round-trip.
- New checkPasswordComplexity util mirroring backend's validator order
- Helper text under password inputs in both modals
- Submit disabled until every rule passes
- client.ts 422 parser falls back to JSON.stringify(detail) when the
mapped array is empty, so a bare status code never masks the real
Pydantic detail again
- i18n keys added in all 8 locales (EN/DE fully translated, others
per project's English-seed convention)
- 7 unit tests pinning the validator contract, including the
reporter's "12345678" input
Show an OrcaSlicer-style bed icon in the archive card's printer-name row
indicating which build plate the print was sliced for (Cool /
Cool SuperTack / Engineering / High Temp / Textured PEI / Smooth PEI),
with the full plate name in the hover tooltip. Closes the gap where
users had to remember which plate matched a re-print or open the
source 3MF in a slicer just to read the bed setting.
Card row also unified: archives with a real Bambuddy-printer
association used to render "H2D-1 GCODE ..." while slicer-only uploads
rendered "Sliced for X1C GCODE ..." -- same line, two different shapes.
Drop the "Sliced for " prefix so both render as a uniform
"<name-or-model> [bed-icon] GCODE <hash>" row, scanning identically
regardless of provenance.
Backend: new bed_type column on print_archives (idempotent ALTER TABLE
migration; SQLite + Postgres safe). Populated from curr_bed_type in
Metadata/slice_info.config (per-plate, authoritative -- that's what
got sent to the printer for the exported plate) with a fallback to
project_settings.config for older 3MF shapes. Wired through both
archive_to_response() (the hand-rolled dict converter that bypasses
from_attributes -- easy to miss) and the /rescan endpoint, so old
archives can be re-parsed via the existing per-archive Rescan button.
Backfill script (scripts/backfill_archive_bed_type.py, --dry-run
supported) re-opens every NULL archive's 3MF on disk to populate the
column. Auto-loads .env from project root before importing backend
modules (config.py reads DATABASE_URL from os.environ at import time,
not from pydantic-settings at Settings() time) and prints the resolved
DB URL with credentials redacted, so operators can confirm they're
hitting the intended database -- Postgres or SQLite.
Frontend: 6 OrcaSlicer-style PNGs ship in frontend/public/img/bed/ --
under /img/ because that path is already statically mounted; a
toplevel /bed-icons/ tried first hit the SPA catch-all and returned
index.html as text/html. New utils/bedType.ts maps slicer strings
case-insensitively, covering both Bambu Studio and OrcaSlicer naming
variants for the same physical plate. Unmapped or NULL bed_type
simply omits the icon, so cards stay clean for pre-feature archives.
feat(spoolman-inventory): squashed feature work for rebase onto dev
Squashed all commits from feature/spoolman-inventory-ui onto a single commit
to enable a clean rebase onto dev. Original per-commit history preserved at
backup tag backup/spoolman-inventory-ui-prerebase-20260507-105721.
feat(spoolman-inventory): squashed feature work for rebase onto dev
Squashed all commits from feature/spoolman-inventory-ui onto a single commit
to enable a clean rebase onto dev. Original per-commit history preserved at
backup tag backup/spoolman-inventory-ui-prerebase-20260507-105721.
"Open in Slicer" emitted `orcaslicer://open?file=<URL>` and
`bambustudio://open?file=<URL>` by plain string concatenation, relying
on a stale comment that claimed the browser preserves URLs in the query
string. That ignores the slicer's own `url_decode()` on the received
query (BS post_init → url_decode + split_str; OrcaSlicer Downloader
regex + url_decode), so any already-percent-encoded character — most
commonly `%20` from filenames with spaces — decoded to a literal space
and the slicer's subsequent HTTP GET returned 0 bytes or 404.
All three URL forms now use `encodeURIComponent()` (matching what the
macOS `bambustudioopen://` branch was already doing, which is why the
bug didn't surface on macOS). Corrected the file-level comment to
document the actual invariant.
Regression test in slicer.test.ts feeds the exact issue reproduction
URL and asserts `%2520` appears in the generated href.
The "Print" button on a printer card (and drag-drop-onto-card) used
FileUploadModal to persist the file as a LibraryFile, then dispatched
through POST /library/files/{id}/print. The LibraryFile row + disk file
were left behind after every one-off print, polluting File Manager with
entries the user never asked to save.
FilePrintRequest.cleanup_library_after_dispatch (default False) opts
into post-dispatch cleanup. When set, _run_print_library_file stages
db.delete(lib_file) in the same transaction as archive_print so a
mid-flight FTP / start_print failure rolls both back cleanly, commits
together, then unlinks the library disk file + thumbnail after commit
succeeds. External library files (is_external=True) are never touched.
Only the Printers-page Direct-Print PrintModal sets the flag. Every
other api.printLibraryFile caller (File Manager Print, Project Detail
Print) leaves it unset — their entries are there by user intent.
Also moves formatPrintName out of PrintersPage.tsx into a new
utils/printName.ts module — fa1c46d9 (#881) exported it inline so its
test could import it, tripping react-refresh/only-export-components.
The Bambu Lab X2D (launched April 2026, dual-nozzle, enclosed, hardened
steel rod gantry, AMS 2 Pro compatible) identifies itself as internal
model code N6 via SSDP/MQTT, and real serials begin with 20P9. None of
these identifiers existed in Bambuddy's registries, so the camera
service fell back to the chamber-image protocol on port 6000 (X2D
doesn't speak it), firmware-check logged "Unknown printer model: N6",
and the dual-nozzle K-profile paths — gated on the H2D serial prefix
"094" — would have treated X2D as single-nozzle.
Backend:
- Register N6 → X2D across every registry (PRINTER_MODEL_ID_MAP,
PRINTER_MODEL_MAP, STEEL_ROD_MODELS, ETHERNET_MODELS,
CHAMBER_TEMP_SUPPORTED_MODELS, firmware-check API keys + wiki path,
virtual-printer SSDP/product/serial tables, DB vp_model_fixes).
- supports_rtsp(): match the X2 display-name prefix and the N6 internal
code; camera now routes to RTSP on port 322.
- Dual-nozzle serial prefix check in bambu_mqtt.delete_kprofile and
kprofiles.set_kprofile broadened to ("094", "20P9") — X2D now takes
the H2D-style cali_idx in-place edit path.
- is_h2d model gate in bambu_mqtt.start_print extended with "X2D" so
timelapse / bed_leveling / flow_cali / vibration_cali / layer_inspect
are sent as integers and external-spool ams_id 254/255 routing is
preserved (H2D-style deputy-nozzle addressing).
X2D uses hardened steel rods like P2S — it is intentionally placed in
STEEL_ROD_MODELS, not CARBON_ROD_MODELS. A regression-guard test pins
the classification.
Frontend:
- mapModelCode in PrintersPage and SpoolBuddyAmsPage handle N6 and X2D.
- Enclosure-door badge and airduct-mode whitelists include X2D.
- MaintenancePage.getMaintenanceWikiUrl routes X2D to P2S wiki URLs for
steel-rod lubrication, belt tension, cold-pull, and PTFE tube
(exported to enable direct unit testing).
Tests:
- test_printer_models.py: TestX2DModel (10 assertions).
- test_bambu_mqtt.py: X2D in start_print ams_mapping and is_h2d gate;
TestDeleteKProfileDualNozzleDetection across H2D, X2D, P2S, X1C.
- MaintenancePageWikiUrls.test.tsx: 15 assertions covering X2D, P2S
regression, X1C/H2D/A1Mini regression, and model-name normalisation.
Docs:
- README: added X2 series to the supported printers table.
- CHANGELOG: new entry under 0.2.3b4 Fixed.
Credit to @krautech for the report and debug bundle, and to @legend813
for PR #989 which seeded most of the registry changes — rod-type
classification was corrected (steel, not carbon) and the dual-nozzle /
K-profile / is_h2d gaps were added on top.
Firmware update modal now shows every version from Bambu's wiki release
history, each badged Usable/Unavailable/Installed. Selecting a usable row
— newer or older than current — swaps the release notes and enables
install for that version, so rollback no longer requires hand-flashing.
Wiki scraper tightened to only read heading-anchor ids (h-XXXXXXXX-YYYYMMDD)
instead of any XX.XX.XX.XX substring, eliminating false positives like an
AMS firmware version mentioned in an H2D changelog being listed as H2D
firmware.
Refs #568
The Printer tab AMS popup and spool auto-provisioner resolved color
names from hardcoded tray_id_name tables with a suffix-code fallback —
and suffix codes like "R1" are not globally unique across material
families. A17-R1 (PLA Translucent Cherry Pink) fell through the
fallback and resolved to "Scarlet Red" (A01-R1, PLA Matte), baking
the wrong name into auto-created inventory spools.
The fix removes the hardcoded tables entirely. Backend resolves color
names via the existing color_catalog table by hex; frontend fetches a
compact {hex: name} map once per session via a new
GET /inventory/colors/map endpoint (auth-gated but not on
inventory:read — read-only views need it too) and stores it in a
ColorCatalogProvider context. A useSyncExternalStore hook cascades a
re-render into pages mounted before the fetch completes so they
refresh from HSL-fallback names once the catalog loads.
Existing auto-provisioned spools keep their stored names; only new
provisioning and live display benefit. Co-Authored-By is intentionally
omitted here per project convention — set it via git config if needed.
When multiple AMS spools match the same type/color criteria, an optional
setting now prefers the spool with the lowest remaining filament. This
helps consume partial spools before starting new ones. Sorting applies
to all matching paths: queue scheduler, print modal, and multi-printer
mapping. Unknown remain values (-1) sort to end.
Bambu Lab firmware treats PA-CF, PA12-CF, and PAHT-CF as interchangeable,
but the print scheduler and filament override UI used exact string matching.
A 3MF requiring PA-CF wouldn't match PA12-CF in the AMS, leaving the
override dropdown disabled and preventing scheduler assignment.
Add a filament type equivalence system (both backend and frontend) so
these PA variants are treated as compatible in scheduler assignment,
AMS slot matching, force color match validation, and the override dropdown.
Also fix the "Force color match" checkbox click target being too wide
(entire row instead of just the checkbox/label) by changing flex to
inline-flex on the label element.
AMS slots now show "B3" instead of "AMS-B Slot 3" and external spool
holders show "Ext" instead of "External", keeping the table readable
at narrow widths.
* Added "Force Color Match" feature to filament override
* Update settings.py
* Update settings.py
* Label updates for warnings and checkbox case
* Initial plan
* Add noMatchingMaterial i18n translations to all 7 locale files
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
* Use {{material}} interpolation in noMatchingMaterial; populate from filament_overrides with getColorName
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
* Updates for PR#625 comments
* Added "Force Color Match" feature to filament override
* Update settings.py
* Update settings.py
* Label updates for warnings and checkbox case
* Initial plan
* Add noMatchingMaterial i18n translations to all 7 locale files
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
* Use {{material}} interpolation in noMatchingMaterial; populate from filament_overrides with getColorName
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
* Updates to PrintersPage and QueuePage
* Update QueuePage.tsx
* Rebase to 0.2.2b3
* Fix compile errors with FilamentOverride
* Updates for PR#625 comments
https://github.com/maziggy/bambuddy/pull/625#pullrequestreview-3908738261
* Fix force color match default, loadedFilamentTypes bug, remove dead translations
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: cadtoolbox <12723486+cadtoolbox@users.noreply.github.com>
Co-authored-by: MartinNYHC <mz@v8w.de>
The per-printer InlineMappingEditor showed filaments from both nozzles
on H2D printers. The single-printer FilamentMapping dropdown was fixed
in 29e9593 but the multi-printer code path was missed. Added nozzle_id
filtering to both auto-match logic and dropdown options via shared
autoMatchFilament() and filterFilamentsByNozzle() functions in
amsHelpers.ts, with 10 regression tests.
- Extract shared detectSystemDateFormat() helper to eliminate
duplicated system locale detection in date.ts
- Derive SUPPORTED_CURRENCIES from CURRENCY_SYMBOLS map instead
of maintaining a duplicate hardcoded list
- Consolidate redundant time-parsing regex paths into one
- Use applyTimeFormat() consistently in formatETA()
- Add exhaustive switch default for type safety
* Add printer card print flow with drag-drop and reusable LibraryUploadModal
Extract inline upload modal from FileManagerPage into a reusable
LibraryUploadModal component. Add a Print button and drag-drop zone
to printer cards that upload files to the library and open PrintModal
with the printer pre-selected. Only .gcode/.gcode.3mf files are
accepted for printing. PrintModal hides printer selector when a
printer is provided via initialSelectedPrinterIds prop.
* Add printer compatibility check for drag-drop and upload-to-print flows
Validates sliced_for_model from file metadata against the target printer model
before opening the print modal, preventing users from printing with incompatible files.
* Improve FileUploadModal: auto-close on success, inline errors, file validation, and i18n
- Close modal automatically after successful upload instead of showing summary
- Show printer compatibility errors inline in the modal instead of closing
- Add validateFile and accept props to restrict file types for print flow
- Add onFileUploaded error return to prevent modal close on incompatible files
- Internationalize all hardcoded error/warning strings across 6 locales
* Clean up incompatible files from library and fix print button i18n
- Delete uploaded file from library when printer compatibility check fails
in both drag-drop and modal upload flows
- Fix print button tooltip to use existing common.print i18n key
- Fix accept attribute to use .gcode,.3mf for proper browser support
* Add printer information modal accessible from card 3-dot menu
Replace inline IP/serial display at bottom of printer card with a
dedicated "Printer Information" modal opened via the card menu. The
modal shows model, status, state, IP address (copyable), serial number
(copyable), WiFi signal, firmware, developer mode, nozzle count, SD
card, auto-archive, total print hours, location, and added date, along
with the printer image. Includes full i18n support across all 6 locales
and accessibility attributes (role="dialog", aria-modal).
* Extract getPrinterImage and getWifiStrength into shared printer utils
---------
Co-authored-by: MartinNYHC <mz@v8w.de>
Add Print Time of Day, Color Distribution, and Records widgets to the
Stats page. Extract shared MetricToggle component for consistent
weight/prints/time toggles. Add date range filtering to archives and
stats API endpoints. Reorganize widgets into parent cards (Printer Stats
and Filament Trends) and fix Dashboard layout persistence for new widgets.
All backend timestamps used datetime.now() (server local time) or the
deprecated datetime.utcnow(). The frontend's parseUTCDate() assumes
timestamps without timezone indicators are UTC and appends 'Z', so
stored timestamps were off by the timezone offset when the container's
timezone wasn't UTC.
Backend: replaced datetime.now() and datetime.utcnow() with
datetime.now(timezone.utc) across 16 files (~80 call sites) for all
database fields and DB comparisons. Cosmetic timestamps (filenames,
user-facing local time formatting) intentionally left as local time.
Frontend: replaced 13 new Date(backendTimestamp) calls with
parseUTCDate() across 8 files to correctly interpret UTC timestamps.
Slicer protocol handlers (bambustudio://, orcaslicer://) launch the
slicer app which fetches files via HTTP but cannot send auth headers.
The global auth middleware returned 401, causing "importing failed."
Add short-lived, single-use download tokens: the frontend fetches a
token via authenticated POST, then builds a /dl/{token}/{filename} URL
the slicer can access without auth headers. Tokens are validated
server-side (5-min expiry, single-use). Applies to archive files,
source 3MFs, and library files.
Also fix platform-specific URL formats to match slicer source code:
- macOS: bambustudioopen:// with encodeURIComponent
- Windows/Linux: bambustudio://open?file= (was wrongly using macOS scheme on Linux)
- OrcaSlicer: orcaslicer://open?file=
- Add formatStorageSize helper in FileManagerModal to display storage
in GB/MB instead of raw bytes
- Show "Overdue" label for queue items whose scheduled time has passed
by more than 1 minute
- Fix missing "in" prefix for English inDays translation
- Fix swapped justNow/now translations in Italian locale
- Fix whitespace formatting for waiting key across all locales
- Add trailing newline to date.ts and date.test.ts
refactor(utils): consolidate date and file size formatting
Extracts formatting logic into dedicated utility functions to improve
code maintainability and consistency across components.
Changes:
- Consolidate date formatting functions (formatRelativeTime, etc.)
- Consolidate file size formatting into single formatFileSize utility
- Fix file size calculation errors
- Update UI components to use new utilities
- Change "ASAP" to "Waiting" for unscheduled queue items
Tests:
- Add comprehensive unit tests for date utilities
- Add unit tests for file size formatting
- Add progress bar, time remaining, ETA, and layer count to currently printing item
- Remove duplicate formatDuration & formatETA functions, now imported from utils/dates
- Remove formatTime (duplicate of formatDuration)
- Update formatETA to support optional i18n translation
- Update translation: common.tomorrow
Backend:
- Add dual external spool support for H2D (vt_tray as list: Ext-L/Ext-R)
- Add cloud filament ID map endpoint (/cloud/filament-id-map)
- Fix RFID spool data erased by periodic AMS updates (skip tag matcher
for RFID-tagged trays)
- Fix AMS slot config overwrites RFID spool state
- Fix K-profile selection corrupts existing profiles on X1C/P1S
- Resolve K-profiles filament name via cloud filament ID map
- Update print scheduler and usage tracker for dual external spools
Frontend:
- Add printer model filtering to ConfigureAmsSlotModal (cloud/local/builtin
presets filtered by @BBL model suffix and compatible_printers)
- Add pre-population for configured slots (preset, color, K-profile)
- Add K-Profiles view with accurate filament name resolution
- Internationalize all ConfigureAmsSlotModal strings (en/de/fr/it/ja — 21 keys)
- Add 5 new ConfigureAmsSlotModal tests (model filtering, pre-selection,
color pre-population, i18n)
- Update PrintersPage for dual external spool rendering
Docs:
- Update CHANGELOG, README, website features, and wiki AMS docs
AMS-HT global tray ID was calculated as ams_id * 4 (= 512 for unit 128)
but AMS-HT uses the raw ams_id directly since it has a single tray.
The backend misidentified 512 as an external spool, producing wrong
ams_mapping2. Fixed in 4 locations: frontend getGlobalTrayId(), backend
start_print() ams_mapping2 builder, print scheduler, and Spoolman tracking.
Users can now choose their preferred slicer (Bambu Studio or OrcaSlicer)
in Settings → General. All "Open in Slicer" buttons across Archives,
3D Preview, and context menus use the correct protocol for the selected
slicer. OrcaSlicer uses orcaslicer://open?file=<URL> on all platforms;
Bambu Studio uses bambustudio:// (Windows) or bambustudioopen:// (macOS/
Linux). Default remains Bambu Studio for backward compatibility.
Remove vestigial _debug_logging_enabled and _debug_logging_enabled_at
globals from support.py (written but never read; DB is queried directly).
Simplify hue classification in PrintersPage.tsx and colors.ts by removing
always-true h < 345 checks and dead 'Unknown' fallbacks. Narrow
getWifiStrength param type to remove always-false null guard.
Date input for scheduled prints was swapping month and day for European
users because:
1. EU format only accepted "/" separator, not "." which is common in
European locales (e.g., "5.2.2026" for Feb 5th)
2. System format fell back to new Date() which interprets ambiguous
dates in US format
Changes:
- Added splitDateParts() helper to accept /, ., and - separators
- Updated parseDateInput() to use proper locale detection for system
format instead of relying on Date constructor
- All explicit formats (us, eu, iso) now accept any of the three
separators
Closes#233
Issue #233: Respect user date/time format in queue scheduler
- Replace native datetime-local input with custom text inputs
- Add date parsing/formatting utilities for US, EU, ISO, and system formats
- Add calendar button that opens native picker for convenience
- Pass dateFormat and timeFormat settings to ScheduleOptionsPanel
- Show format-appropriate placeholders (MM/DD/YYYY, DD/MM/YYYY, etc.)
Closes#233
- Moved BAMBU_HEX_COLORS mapping and getColorName()/hexToColorName() functions to a shared location
- Exported functions for use across components
- Updated modals to use shared colors:
- ReprintModal.tsx - removed ~100 lines of duplicate color code, now imports from utils/colors
- AddToQueueModal.tsx - same cleanup
- EditQueueItemModal.tsx - same cleanup
- Added AMS mapping to EditQueueItemModal:
- Added state for showFilamentMapping, isRefreshing, manualMappings
- Added queries for filament requirements and printer status
- Added loadedFilaments, filamentComparison, amsMapping memos
- Added collapsible filament mapping UI section (same as other modals)
- Initializes manualMappings from existing item.ams_mapping
- Submits ams_mapping when saving changes
- Backend changes:
- Added ams_mapping field to PrintQueueItemUpdate schema
- Updated update_queue_item route to serialize ams_mapping to JSON
- Frontend API client:
- Added ams_mapping to PrintQueueItemUpdate interface
- Changed "Print" to "Reprint" on archive card button (ArchivesPage.tsx:690)
- Bumped service worker to v22
maziggy