Bed levelling, flow calibration, and nozzle-offset calibration were on/off
only, so the sole way to run bed levelling was to force a full level before
every print. Bambu Studio has always offered a third "Auto" state that lets
the printer skip the calibration when it was done recently -- the state most
users actually want. Make these three options tri-state (off/on/auto),
defaulting to auto, and leave vibration/layer-inspect/timelapse as on/off
(Bambu Studio exposes no auto for those).
Wire encoding follows Bambu Studio's source exactly: each option sends a JSON
bool (true only for "on") plus a companion int -- off=0, on=1, auto=2. The
bool fields stay booleans (the #1478 H2S regression); only the companion int
widened from {0,1} to {0,1,2}. #1721's observation that stage 8/39 stays
queued when sending 2 is the auto contract (queued, skipped at runtime if
recent), not a broken "off".
- schemas: TriState = Literal[off/on/auto] with a BeforeValidator coercing
legacy bool / 0-1 / true-false so old clients and un-migrated rows validate
- model + migration: boolean columns -> String; SQLite via column affinity +
data backfill, PostgreSQL via ALTER COLUMN TYPE guarded on information_schema
(verified on both dialects); settings rows normalised true/false -> on/off
- MQTT: start_print takes the tri-state strings and emits the paired bool+int
- Virtual Printer: reconstructs the slicer's auto/on/off from the int companion
(auto_bed_leveling / extrude_cali_flag) in both capture paths
- frontend: CalibrationMode type; off/auto/on segmented controls in the print
dialog, queue bulk-edit, and Settings -> Workflow; calibrationMode_* strings
in all 11 locales
New scheduler stage that heats the bed (and the chamber, on supported
printers) and holds at temperature before each queued print starts —
the heat-soak engineering filaments need for adhesion and warp
control. Bambuddy waits between FTP upload and start_print, so the
soak runs while the printer is otherwise idle. M191 is silently
ignored by Bambu firmware, so doing this at the orchestration layer
is the only place it works.
Resolution order at dispatch:
1. PrintQueueItem.preheat_override ∈ {inherit, on, off}.
'off' skips entirely; 'inherit' falls back to the global
preheat_enabled toggle; 'on' forces the stage even when the
global is off.
2. chamber_target = item.preheat_chamber_target_override
?? max(filament_map[normalize(t.tray_type)] for loaded slots)
?? 0.
Mixed PA+PLA picks PA's 50 (max-across-slots — PA's chamber
requirement is binding, PLA doesn't suffer being warm). PLA-only
derives 0 and skips the chamber phase automatically.
3. Three hardware tiers for chamber heat:
- Active chamber heater (H2C/H2D/H2D Pro/H2S/X2D/X1E) → M141 +
chamber-sensor wait
- Chamber sensor only (X1C/P2S) → no M141, passive bed-radiation
wait with hard max-wait cap
- No chamber sensor (P1S/P1P/A1/A1 Mini) → bed + soak timer only
4. Airduct flap (H2C/H2D/H2D Pro/H2S/X2D/P2S) auto-switches to
match the chamber target — heating mode for engineering
filaments, cooling mode for PLA. Bambu firmware does NOT
auto-switch the flap with M141, so without this an ABS print
on a previously-cooling flap fights the open exhaust, and a
PLA print on a previously-hot flap recirculates ABS heat.
Idempotent: only fires set_airduct_mode when current ≠ desired.
Settings → Workflow → Queue & Dispatch → Preheat & Heat Soak card:
master enable toggle (default off — disabled installs see no change),
per-filament chamber-target editor (replaces a single global int that
shipped in the first cut and couldn't serve PA + PLA in the same
config), preheat_max_wait_seconds, preheat_soak_seconds. The Print
Options panel in PrintModal gets a Preheat sub-section with the
tri-state Inherit/On/Off control and an optional chamber-target
override input.
DB migration: PrintQueueItem gains preheat_override VARCHAR(10)
DEFAULT 'inherit' and preheat_chamber_target_override INTEGER NULL.
Idempotent via _safe_execute. Existing rows behave exactly as before
the migration.
Best-effort throughout: printer drops, refused M141 or set_airduct,
missing bed temp, lost MQTT state mid-wait all log and return cleanly.
Normal upload + start path runs after this returns regardless.
Three issues from the post-merge audit of the unified-dispatch PR, all
pre-existed on dev but became more impactful once every print routes
through the queue:
1. Start/Stop ownership gates. /queue/{id}/stop required QUEUE_UPDATE_ALL
(admin-only) -- operators saw the Stop button in the queue UI but got
403 on click. /queue/{id}/start required QUEUE_UPDATE_OWN with no
ownership check -- _OWN holders could start anyone's queue items via
direct API. Both routes now use require_ownership_permission, mirroring
/cancel. Stop is strict (rejects unowned items for _OWN); start preserves
#1670's VP-import flow where _OWN can start NULL-owner items and claim
ownership at click-time. Frontend QueuePage Start/Stop buttons flip
from printers:control to canModify('queue', 'update', created_by_id).
2. TOCTOU race on insert_position. Concurrent ASAP inserts to the same
scope both computed MAX(position) from before the other committed; in
an empty scope, both inserted at position=1 (duplicate). Wraps the
read+update in a transaction-scoped Postgres pg_advisory_xact_lock
keyed on the printer_id. Different printers don't contend. SQLite
serializes writes implicitly so the path is no-op there. Dialect is
checked against the live session binding, not the is_sqlite() helper,
because the test fixture overrides get_db to SQLite while
settings.database_url still points at Postgres.
3. /reorder duplicate-position validator. POST /queue/reorder set position
from the payload in a loop with no uniqueness validation -- a buggy
drag-drop client could leave the queue with ambiguous ordering (the
scheduler's ORDER BY (printer_id, position) ties break by row order).
New model_validator on PrintQueueReorder rejects duplicates at the
schema layer with 422 + "Duplicate positions in reorder request: [N, ...]".
First-attempt fix (d196cfc5) was wrong about the cause. Real root,
traced via @mkoreen's BAMBUDDY_VP_DUMP_WIRE capture + 2026-06-21
support bundle:
mqtt_server.py:1296 was passing the slicer's bare subtask_name
(e.g. "Model_Name") into on_print_command, which stashed under
that key. _add_to_print_queue looked up under file_path.name
(the FTP filename WITH extension, "Model_Name.gcode.3mf"). The
two strings never matched. pop returned None, the 2s wait fired
against a key the stash side never signaled, every captured
slicer field silently fell back to settings defaults.
Affected EVERY Bambu Studio "Send" upload across EVERY model —
not just H2C nozzle_mapping. bed_leveling / flow_cali /
vibration_cali / layer_inspect / timelapse from the original
#1403 capture have been silently ignored since BambuStudio
started splitting subtask_name (bare) from file (with extension).
Unit tests passed because fixtures called on_print_command with
file_path.name directly, bypassing the broken caller.
Fix in manager.py::on_print_command: derive
stash_key = data.get("file") or filename and use it for both
_slicer_print_options and the event lookup. filename
(subtask_name) still flows unchanged to _schedule_finish_release
— push_status echoes it back as gcode_file / subtask_name and
the slicer matches against its own subtask_name there, so
re-routing that path was a separate regression I caught and
reverted mid-audit.
Also: nozzles_info field was a wrong guess in d196cfc5 —
BambuStudio never sends it (confirmed via wire capture). Drop
the capture, dispatch, schema, kwarg, and route paths. DB
column stays nullable so old rows still load; nothing reads
or writes it.
Diagnostic: DEBUG log when _add_to_print_queue finds no slicer
options after the 2s wait, including the looked-up key and the
actual cache keys present. Future stash/lookup mismatches will
be obvious from a log line instead of needing a wire capture.
Behaviour change worth flagging: users on Bambu Studio whose
slicer-side bed-leveling / flow-cali / vibration-cali /
layer-inspect / timelapse differ from Bambuddy's
default-workflow settings will see their slicer choices
honored now instead of silently overridden. Restores #1403's
original intent.
BambuStudio's project_file MQTT command for O1C2 (the H2C dual-
nozzle-rack variant) carries nozzle_mapping (per-filament physical
nozzle position IDs) and nozzles_info (per-extruder rack metadata).
The VP intake was dropping both, so the H2C firmware fell back to
"last matching nozzle type" auto-pick and ignored the user's
slicer choice — every HF print landed on R2, every standard print
landed on R4.
Carry both fields through the VP intake → queue item → MQTT
dispatch path. New nullable TEXT columns on print_queue, non-
branched ALTER (matches ams_mapping / filament_overrides
precedent). Dual-nozzle gate at start_print() keeps the fields
off single-nozzle dispatches. Fail-open on malformed JSON —
firmware auto-picks, never worse than pre-fix.
Stamps both fields on every plate in the multi-plate Send All
loop (#1697 / #1188 precedent).
ams_mapping2 still handles H2D/X2D dual-extruder routing
unchanged; this fix is scoped to the O1C2 rack-swap mechanism.
Restructures the queue page around three tabs (Queue / History / Timeline)
and adds first-class batch grouping plus a real time-based timeline.
Queue tab
- Layout toggle: Sort by Position (flat list) or Group by Printer (per-
printer section cards with aggregate count / time / weight headers).
- Batch grouping: pending items sharing a batch_id render as a single
collapsible row with aggregate stats; children draggable within the
batch only. Per-batch collapse state in localStorage.
- Multi-drag: dragging any selected row moves all selected items as a
contiguous block via DragOverlay (+N ghost).
- Selection bar gains a Group as batch action when 2+ ungrouped items
are selected. Ungroup lives on the batch parent row.
History tab
- Two-line rich rows: filament color swatch + weight + type, user
attribution, inline error message on failed / skipped rows.
- Responsive 1 / 2 / 3 column grid so a long history uses available
width instead of stretching one row per line.
- Batch siblings group into a collapsible parent with status-rollup
chips (3 OK / 1 failed / etc).
- Thumbnail hover preview shows the full image at 192x192 next to the
small thumb.
Timeline tab
- Replaces the hourly-list view with a Gantt swimlane: one row per
printer (plus per target_model and unassigned), horizontal hour
axis, jobs as bars positioned by start time and sized by duration.
- Live NOW marker.
- Only committed schedules are rendered: currently printing items,
pending items with scheduled_time, and pending ASAP behind an active
print. Staged (manual_start), waiting (waiting_reason), and ASAP
jobs on idle printers are filtered out.
- 24h rolling window with 12h step controls.
- Per-bar tooltip with start, end, progress, batch name.
Backend
- POST /queue/batches creates a batch, optionally assigning existing
pending item_ids (manual grouping) or returning an empty batch the
client can attach to subsequent /queue/ POSTs.
- POST /queue/batches/{id}/ungroup clears batch_id from all members
(skipping items the caller does not own) and deletes the batch row
when no members remain.
- POST /queue/ accepts an optional batch_id and validates that the
batch exists, is active, and the caller may modify it. The existing
quantity > 1 auto-batch path still fires when no batch_id is sent.
PrintModal
- When N plates from one source are queued in a single submission
(model assignment or single printer), the modal pre-creates a batch
and passes its id to each addToQueue call so multi-plate jobs land
grouped automatically. Falls back to ungrouped items if the batch
pre-create fails.
When the user clicked Print Anyway on a filament-deficit warning, the
acknowledgement was one-shot. The route cleared manual_start and
filament_short, then the next scheduler tick re-ran
compute_deficit_for_queue_item against identical spool state, found
the same deficit, and re-set both flags. The item bounced between
"user said anyway" and "scheduler re-blocked" — every Play click
returned 409, every confirm got rolled back on the next tick.
Add a persistent acknowledgement flag on the queue item:
- New column `skip_filament_check` on print_queue. SQLite + Postgres
migration branched on is_sqlite() so Postgres doesn't reject
DEFAULT 0 on BOOLEAN.
- PrintQueueItemCreate + PrintQueueItemResponse schemas + the
TypeScript types carry the field.
- POST /print-queue/{id}/start with skip_filament_check=true now
ALSO sets item.skip_filament_check = True (not just clearing
manual_start / filament_short).
- PrintScheduler._block_on_filament_deficit short-circuits to
False — no compute, no flag-setting, no notification — when
item.skip_filament_check is True. We trust the operator's
decision and stop fighting them.
- PrintModal at queue-creation time threads
skip_filament_check=true into the create payload when the user
clicks Print Anyway on the frontend deficit warning, so a print
that was warned-then-acknowledged at add-to-queue time goes in
pre-acknowledged — scheduler never blocks it on first tick.
Flag is not auto-cleared on spool swap by design: if remaining is
now sufficient, the check returns no deficit anyway, so the flag
is moot. Auto-clearing would add lifecycle complexity without
changing behaviour.
AMS Backup awareness (the other half of the discussion) intentionally
NOT included — verified the H2D's bit-26 of print.cfg toggles with
the printer-side AMS Backup setting, but the X1C's cfg has a
different shape entirely and verifying every model family isn't
realistic. Silently under-warning would be worse than always
per-slot. The check stays single-slot for now.
Reporter on a multi-printer farm with 40+-plate runs needed to walk to
the printer with the right physical plate, but the queue and the
scheduling modal didn't surface curr_bed_type the way the archive card
already did.
New utils/threemf_tools.extract_bed_type_from_3mf helper (per-plate) so
both the queue API and the /plates endpoint can return per-plate values.
PrintQueueItemResponse.bed_type populated from archive.bed_type /
library_file.file_metadata['bed_type'] as the default, then overridden
per-plate via the helper when item.plate_id is set. /archives/{id}/plates
(and library equivalent) include bed_type in each plate object.
Per-plate accuracy matters because archive.bed_type is captured at
ingest as only the first plate's value (services/archive.py:235) -
a 40-plate 3MF mixing PEI + Engineering returns PEI at the archive
level for every plate. The helper re-reads the 3MF and returns the
truth.
Frontend: queue card meta row + PlateSelector per-plate row + PrintModal
header all render bed icon + canonical label via the existing
getBedTypeInfo() helper, same as the archive card.
Bambuddy's project_file MQTT payload hardcoded "nozzle_offset_cali": 2 (skip),
giving users on H2D / H2D Pro / H2C / X2D no way to control the same toggle
BambuStudio exposes. Critical for diamond-nozzle setups that must keep the
calibration off.
start_print() now takes a nozzle_offset_cali kwarg; the value is encoded as
1 (run) or 2 (skip) and gated on is_dual_nozzle so single-nozzle machines
always send 2 even if a stale flag arrives. The kwarg threads through
printer_manager, both background_dispatch sites, and print_scheduler so
every dispatch path respects the per-item setting.
print_queue gains a nozzle_offset_cali column (DEFAULT TRUE, is_sqlite()
branch for Postgres BOOLEAN). Settings default key default_nozzle_offset_cali
defaults to TRUE to match BambuStudio. Schemas updated across print_queue,
library FilePrintRequest, archive ReprintRequest, settings.
PrintModal renders the new toggle only when the selected printer is dual-
nozzle (printer-mode: nozzle_count===2; model-mode: DUAL_NOZZLE_MODELS).
SettingsPage default-print-options row + QueuePage bulk-edit tri-state both
hide unless any registered printer is dual-nozzle. Labels reuse the existing
settings.default* keys so the only new i18n strings are
settings.defaultNozzleOffsetCali / Desc and queue.bulkEdit.nozzleOffsetCali
- real translations in all 11 locales.
The pre-print deficit warning from #720 only ran inside the PrintModal
submit flow. Both the green ▶ button on a staged queue row (POST
/queue/{id}/start) and the Virtual Printer queue-mode intake bypassed
it — auto_dispatch=True VP intakes would dispatch unsupervised onto
spools that physically can't complete the print.
Extracted the deficit check into backend/app/services/filament_deficit.py
(single source of truth, both internal inventory and Spoolman modes).
POST /queue/{id}/start returns 409 with a structured deficit payload
unless ?skip_filament_check=true. The dispatch scheduler runs the same
check before each _start_print; a deficit promotes the item to
manual_start + sets a new filament_short flag (idempotent migration on
print_queue). The flag clears automatically on the next tick when the
operator swaps a spool to one with enough material.
Frontend ▶ catches the 409 and opens a confirm modal showing each
shorted slot's required vs remaining grams; the row now renders a
yellow "Insufficient filament" badge when filament_short is set.
Translated across all 9 locales.
Opening the Print Queue page fired 404s on /archives/{id}/thumbnail,
/archives/{id}/plates, and /archives/{id}/plate-thumbnail/{n} for any
row pointing at a soft-deleted archive. Two underlying problems wearing
one mask:
1. Cosmetic: the queue API was copying item.archive.thumbnail_path into
archive_thumbnail without checking deleted_at. Soft-delete leaves the
row (so the relationship resolves) but removes the file from disk, so
the cached path was always stale.
2. Functional: a queue item whose 3MF was removed can never dispatch.
Without an explicit cancel, the item sits in 'pending' forever with
no indication to the user about why nothing is printing.
Fix in three parts:
- New _cancel_pending_queue_items() helper, called from soft_delete_archive
alongside the existing print-log thumbnail cleanup. Sets status='cancelled'
+ waiting_reason='Source archive deleted' on every pending queue item
linked to the archive. Only 'pending' is touched - completed/failed/
cancelled rows are historical and untouched. Hard-delete is already
covered by ON DELETE CASCADE on print_queue.archive_id.
- Queue API serializer now checks item.archive.deleted_at before
populating any archive-derived field. New archive_deleted: bool field
on PrintQueueItemResponse signals the soft-deleted state.
- Frontend's getArchivePlates query in QueuePage was gated on archive_id
only - archive_id is the real FK and stays exposed for dispatch/audit,
so added an explicit && !item.archive_deleted clause to respect the
new flag. Thumbnail render and CompactHistoryRow/QueueTimelineView
already gate on archive_thumbnail so the backend suppression alone
covers them.
Regression tests pin cancel-only-pending behavior, soft-deleted
suppression + archive_deleted=True flag, and the sanity guard that
live-archive fields keep flowing through unchanged.
* feat: print files directly from project view (closes#930)
Show printable files from linked library folders directly in the project
detail page, with Print Now and Add to Queue buttons per file. Removes
the detour through the File Manager for common reprint workflows.
Per-model start/end G-code snippets configurable in Settings (Workflow
tab). Queue items get "Inject G-code" toggle — scheduler injects
snippets into a temp 3MF copy before FTP upload. Supports Farmloop,
SwapMod, AutoClear, Printflow 3D and similar bed-clearing systems.
Original files are never modified.
New SJF toggle badge on the queue page. When enabled, the scheduler
picks shorter print jobs before longer ones instead of FIFO. A
starvation guard flags jobs that get skipped once, moving them to
the front on the next cycle so long jobs can't be postponed indefinitely.
- Add print_time_seconds and been_jumped columns to PrintQueueItem
- Cache print duration from 3MF metadata at queue item creation
- SJF query: printer_id, target_model, been_jumped DESC, print_time_seconds ASC, position
- Mark jumped items in-memory after each print start
- Toggle badge on queue page header with live state indicator
- Frontend auto-sorts to match scheduler order when SJF enabled
- Settings schema, boolean parsing, and migration (SQLite + PostgreSQL)
- i18n badge keys for all 7 locales
- 10 integration tests for SJF ordering and starvation logic
- Wiki, website, README, and changelog updated
Queue endpoints now return filament_type, filament_color, layer_height,
nozzle_diameter, and sliced_for_model from the archive or library file.
Previously this data was only available via the archive API.
When scheduling a print to "any printer" (model-based assignment),
users can now override the 3MF's original filament choices per slot.
The override dropdown shows compatible filaments loaded across all
printers of the selected model, filtered by type and nozzle (H2D).
The scheduler matches against overridden type/color instead of the
original 3MF values, preferring printers with exact color matches.
Backend:
- New GET /printers/available-filaments endpoint (aggregates loaded
filaments across printers of a model, includes extruder_id for
dual-nozzle nozzle-aware filtering)
- New filament_overrides JSON column on print_queue table
- Scheduler applies overrides before AMS mapping, clears tray_info_idx
on overridden slots so color matching takes priority
- Printer selection prefers printers with most override color matches
Frontend:
- New FilamentOverride component with per-slot override dropdowns
- Type-filtered options (PLA slots only show PLA)
- Nozzle-aware filtering (H2D: only shows filaments on correct extruder)
- Integrated into PrintModal for model-based queue mode
Tests:
- 11 backend unit tests (color match counting, override application)
- 12 frontend tests (rendering, type/nozzle filtering, interactions)
i18n: All 6 locales (en, de, fr, it, ja, pt-BR)
Features:
- Add location filter for "Any {Model}" queue assignments
- Queue items can target a specific location (e.g., "Any X1C in Workshop")
- Location dropdown filter on Queue page to view jobs by location
- Scheduler considers location when assigning model-based jobs
Closes#220
Track and display who performs key actions in Bambuddy:
- Archives: who uploaded each archive file
- Library: who uploaded each file in File Manager
- Queue: who added each print job to the queue
- Printers: who started the current print (reprint tracking)
Backend changes:
- Add created_by_id column to print_archives, library_files, print_queue tables
- Add database migrations for new columns (auto-run on startup)
- Update archive, library, and queue routes to capture current user
- Add current-print-user endpoint for printer reprint tracking
- Track reprint user in PrinterManager in-memory state
- Fix file uploads not sending auth headers (FormData requires explicit headers)
Frontend changes:
- Display username on archive cards, library files, queue items
- Show "Started by" on printer cards during active prints
- Add auth headers to all 12 FormData upload functions
- Update TypeScript types for user tracking fields
Tests:
- Add unit tests for PrinterManager user tracking methods (7 tests)
- Add integration tests for current-print-user endpoint (3 tests)
- Add integration tests for library file user tracking (3 tests)
Works when authentication is enabled; gracefully hidden when disabled.
Closes#206
Model-based queue assignment:
- Extract printer_model from sliced 3MF files during upload
- Display sliced-for model in archive view
- New queue mode: assign to "Any [Model]" instead of specific printer
- Scheduler auto-assigns to first idle printer of matching model
- Filament validation: only assign to printers with required filament types loaded
- Waiting reason display shows why jobs are waiting (e.g., "Waiting for filament: Printer1 (needs PLA)")
- "Waiting" status badge (purple) distinguishes from regular "Pending"
Queue notifications (7 new events):
- Job Added: When a job is added to queue
- Job Assigned: When a model-based job is assigned to a printer
- Job Started: When a queue job starts printing
- Job Waiting: When a job is waiting for filament (enabled by default)
- Job Skipped: When a job is skipped due to previous failure (enabled by default)
- Job Failed: When a job fails to start (enabled by default)
- Queue Complete: When all queued jobs finish
Backend changes:
- New columns: print_queue.target_model, print_queue.required_filament_types, print_queue.waiting_reason
- New columns: notification_providers.on_queue_job_* (7 event triggers)
- Notification templates for all queue events
- Scheduler validates filament compatibility before model-based assignment
- Queue API extracts filament types from 3MF when adding model-based items
- Local backup/restore includes queue notification settings
Frontend changes:
- TypeScript interfaces updated for new fields
- Queue page shows waiting reason and "Waiting" badge
- Notification settings includes "Print Queue" section with 7 toggles
Closes#162
New Features:
- Queue bulk edit: Select multiple pending items and edit printer
assignment, print options, or cancel them at once (Issue #159)
- Tri-state toggles (unchanged/on/off) for selective field updates
Fixes:
- Progress milestone notifications showed wrong time (e.g., "17m" instead
of "17h 47m") - fixed by converting remaining_time from minutes to
seconds (Issue #157)
- File Manager folder names now show full name on hover tooltip (Issue #160)
Backend:
- Added PATCH /queue/bulk endpoint for bulk updates
- Route ordering fixed to prevent /bulk matching as /{item_id}
Frontend:
- Added checkbox selection to pending queue items
- Added bulk action toolbar with Select All, Edit Selected, Cancel Selected
- Created BulkEditModal with tri-state toggles for each setting
Tests:
- Added 7 integration tests for bulk update endpoint
Closes#159
- Print from File Manager with plate selection, AMS mapping, and print options. Closes#94
- Add to queue without creating archive (reduces clutter)
- Queue displays library file name, thumbnail, and print time
Fixes:
Queue items from File Manager now reference library files directly instead of
creating archives upfront. Archives are created automatically when prints start.
- Moved BAMBU_HEX_COLORS mapping and getColorName()/hexToColorName() functions to a shared location
- Exported functions for use across components
- Updated modals to use shared colors:
- ReprintModal.tsx - removed ~100 lines of duplicate color code, now imports from utils/colors
- AddToQueueModal.tsx - same cleanup
- EditQueueItemModal.tsx - same cleanup
- Added AMS mapping to EditQueueItemModal:
- Added state for showFilamentMapping, isRefreshing, manualMappings
- Added queries for filament requirements and printer status
- Added loadedFilaments, filamentComparison, amsMapping memos
- Added collapsible filament mapping UI section (same as other modals)
- Initializes manualMappings from existing item.ams_mapping
- Submits ams_mapping when saving changes
- Backend changes:
- Added ams_mapping field to PrintQueueItemUpdate schema
- Updated update_queue_item route to serialize ams_mapping to JSON
- Frontend API client:
- Added ams_mapping to PrintQueueItemUpdate interface
- Changed "Print" to "Reprint" on archive card button (ArchivesPage.tsx:690)
- Bumped service worker to v22
- ReprintModal: Dropdown to override auto-matched AMS slots
- AddToQueueModal: Collapsible filament mapping section
- Backend: Store ams_mapping in print queue, apply when print starts
- Color names in dropdowns (decoded from Bambu codes or derived from hex)
- Blue ring indicator for manually selected vs auto-matched slots
- Status indicators: green (match), yellow (type only), orange (not found)
Closes#76
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Features:
- Resizable printer cards (S/M/L/XL) with toolbar controls on Printers page
- Queue Only mode for staging prints without automatic scheduling
- "Queue Only" option in add/edit queue modals
- Purple "Staged" badge and Play button to release to queue
- manual_start field in database with migration
Fixes:
- Improved camera stream stuck detection with automatic reconnection
Tests:
- Added 16 integration tests for print queue API endpoints
- New APIBrowser component with full OpenAPI schema integration
- Fetches and parses /openapi.json automatically
- Groups endpoints by API tags (printers, archives, settings, etc.)
- Expandable endpoint sections with color-coded method badges
- Path parameter, query parameter, and JSON body editors
- Auto-populates request body with schema examples
- Live API request execution with response display
- Response shows status code, timing, and formatted JSON
- Copy response button with clipboard fallback
- Search to filter endpoints across all categories
- Expand All / Collapse All buttons
- Link to Swagger UI (/docs)
- Two-column layout for API Keys tab
- Left: API key management + webhook documentation
- Right: API Browser with dedicated test key input
- Parameter validation
- Shows warning for missing required parameters
- Validates before sending requests to avoid 422 errors
- UX improvements
- "Use in API Browser" button on newly created keys
- Responsive layout (stacked on mobile, side-by-side on xl+)
maziggy