Raise the brace-expansion override from ^5.0.9 to ^5.0.12. Earlier
versions can run out of stack on deeply nested brace groups and take
quadratic time on the {a},b} rewrite. brace-expansion is a dev-only
transitive dependency of eslint (through minimatch) and only expands
the fixed globs in eslint.config.js.
Raise the js-yaml override from ^5.2.3 to ^5.4.1. Versions up to 5.4.0
do not count empty mappings towards maxTotalMergeKeys, so a small YAML
file can keep the CPU busy for a long time. js-yaml is a dev-only
transitive dependency of eslint and only parses our own ESLint configs.
C11 is the P1P, C12 the P1S, C13 the X1E and N7 the P2S, as the virtual
printer and a real P1P 3MF already say. The frontend map had them shifted,
so discovery pre-filled a P1S as a P1P and an X1E as a P2S. The backend
map read C11/C12 as X1C/X1 and lacked N7, the firmware check sent C13 to
the P2S line, and the capability lists never matched BL-P001 because
their lookup strips the dash.
-----
Post work PR #3134
POST /notifications/app-message delivers an app's message to every channel
with the new "Messages from connected apps" switch on (off by default),
through quiet hours, the digest and the log. API keys need the new "Send
notifications" permission, and their owner notifications:update; plain text,
http(s) links, 20 messages a minute per key. The electricity-price door and
this one now share one scoped-key check. /queue?batch=<id> opens and
highlights one batch order.
fix(#1898): keep Telegram link previews, and keep the outcome prompt's failures its own
Four follow-ups to the post-print outcome confirmation merged in #3047.
Telegram: link previews were switched off for every message rather than
only for the outcome prompt, so a print_complete template carrying
{finish_photo_url} lost its photo preview whenever the photo was too
large to attach. _send_telegram now takes link_preview, and only the
prompt turns it off, as the Slack unfurl change already did.
Archives: Reset left the new Unconfirmed filter on, so the list stayed
narrowed and the button seemed to do nothing.
Print start: when the external-print check hit a failed statement, it
rolled back the caller's whole transaction, which expired the printer
and the just-created archive; on an async session the next read of
either raises, and the start notification, energy reading and timelapse
baseline were skipped. The check's reads now run in a savepoint, and a
failed flag write reloads the archive and printer after its rollback.
Print complete: a failed outcome prompt left the notification session
needing a rollback, so the per-user print email sent on it next failed
too. The dispatch now rolls back on failure.
Minimal OAuth 2.0 authorization-code flow with PKCE (S256): admins register
an app with one exact callback URL (Settings > API Keys > Connected Apps);
/connect/authorize asks for consent once and returns a single-use, 60 s code
bound to app, callback and challenge; POST /api/v1/connect/token swaps it,
with the client secret, for the user's identity and permissions. Codes and
secrets stored hashed, exchanges rate-limited per client and IP, no redirect
before the callback is validated, API keys cannot authorize, refused while
auth is disabled. i18n for all 15 locales.
-----
fix(db): upgrading from 0.2.4.0 or older no longer crashes at startup
The #2974 failure-reason conversion ran before the #1378 migration that adds
print_log_entries.failure_reason, so older databases stopped with "no such
column: failure_reason". It now skips a table without the column, only runs
where a legacy label exists, and on SQLite rebuilds archive_fts first, since
archives created before that index existed trip "database disk image is
malformed" when updated.
POST /queue/batches accepts external_source + external_ref; both are
returned on every batch and filterable on GET /queue/batches. The pair is
unique (index uq_print_batches_external), so a retried create answers 409
instead of queueing the same order twice. Migration covers SQLite and
PostgreSQL.
Follow-ups after merging PR #3128 (with the #2990 preview work):
- PDF preview failed on every browser without
Map.prototype.getOrInsertComputed (Chrome < 145, Firefox < 144,
older Safari): "This file cannot be previewed" for any PDF. Load
pdf.js's legacy build, which bundles the polyfills for page and
worker, and bundle the worker through Vite (?worker&url) so
build.target lowers its class static block for Safari 16.0-16.3.
The browser-baseline check only scanned .js output and never saw
the copied .mjs worker; it scans .mjs too.
- PDF grid thumbnails only existed after someone opened the preview.
Page one is now rendered server-side with PDFium (pypdfium2, new
dependency, prebuilt wheels for every shipped platform) on upload,
ZIP extraction and external-folder scans; Generate Thumbnails
backfills PDFs as well. Renders are serialised behind a lock
(PDFium is not thread-safe), run off the event loop, and scale
from the page size so a huge MediaBox cannot allocate a huge
bitmap. Unreadable PDFs land without a thumbnail and keep the
browser fallback.
- A large STEP file takes over a minute to mesh in the browser and
showed only a spinner. STEP loads now show "Converting STEP
model... N s" and a note that large files can take a minute or
more, in all 15 locales.
- Drop the two occt-import-js "externalized for browser
compatibility" build warnings (path/crypto are only required in
its Node branch); any other externalization still shows.
The Print / Schedule dialog's filament mapping is where the colour a slice
asked for is compared against the colour actually loaded, and only the
left-hand side of that comparison had a swatch. The slot, and every slot in
its dropdown, was text -- and the text cannot be trusted: a slot's colour name
is resolved from the Color Catalog or, failing that, from hue, so a
third-party beige is announced as "Orange". A "Color mismatch" warning then
gives no way to tell a real mismatch from two names for the same hex without
opening the printer card in another tab, which on a farm swapping twenty or
thirty non-Bambu colours between machines is a check made many times a day.
Each slot now carries its colour and its hex, and the slot whose colour is
exactly the one the slice asked for is ticked. This works for a slot bound to
an inventory spool and for one configured through Configure Slot or on the
printer itself: the second kind has no inventory row behind it, and the
printer's own tray colour is then what draws. A bound spool contributes what a
tray record cannot -- SlotSpoolIdentity gains extra_colors and effect_type, so
a two-tone or glittery spool draws as itself rather than as its base colour.
The same treatment goes to the filament-override picker used for model-based
assignment. It is the same choice on the other dispatch path, and leaving it
text-only would have made one decision read two ways.
Both controls stop being <select>s to do it, because an <option> renders text
and nothing else. SlotPicker keeps what the select gave for free -- arrow,
Home/End, Enter and Escape keys, listbox semantics, and the border colouring
that encodes match, same-type-different-colour and not-loaded -- and is
portaled with position:fixed so it is not clipped by the dialog's own scroll
container, flipping above the row when there is no room below.
print_archives.library_file_id -> library_files.folder_id ->
library_folders.archive_id -> print_archives. Three nullable SET NULL
links, each reasonable alone, that together made a loop
metadata.sorted_tables could not sort: it dropped those edges, warned on
every backup and every restore, and could return an order placing a
child before its parent -- which once imported library_files ahead of
library_folders and killed a restore on a ForeignKeyViolation.
The restore no longer depends on that order (it strips every foreign key
before importing and adds them back after), but the backup export sorts
the same way, and the warning ends with "may raise an error in a future
release" -- which would break backup and restore on one upgrade.
Marking one edge use_alter removes it from the sort graph, not from the
database: PostgreSQL emits it as ALTER TABLE ADD CONSTRAINT, as it
already did for every constraint on these three tables, and SQLite
inlines it into CREATE TABLE, so ON DELETE SET NULL holds on both.
Verified against PostgreSQL 16 and SQLite.
Switching an "Any P2S" job to a specific P2S cleared its filament
override: "Specific Printer" empties the target model and the reset
effect counted that as a model change. Printer mode also matched trays
against the 3MF's colours, never sent the override, and left the old one
on the row.
The reset now compares against the last model actually targeted, so the
switch keeps the override while a real model or plate change still clears
it. Printer-mode tray matching (single, per-plate, multi-printer and the
selector's per-printer editor) runs against the requirements with the
overrides applied, mirroring the scheduler's _apply_filament_overrides; an
entry naming the slot's own filament is not a swap and keeps its
tray_info_idx. Printer-mode submits carry the user's overrides, and the
create endpoint stores them for a printer-targeted job, so a dispatch-time
recompute of an unresolved mapping looks for the same filament.
Saving re-attaches the tray_info_idx an unchanged entry already had, so a
virtual printer's force-colour PLA-variant pin (#2650) survives an edit in
either assignment mode. The printer card's compatibility filter skips
printer-targeted jobs: it mirrors the model scheduler, and hiding a job on
filament would hide it from the printer it is going to run on.
Selecting sliced files for two printer models and asking for 25 copies
queued one item. The queue emptied as soon as it dispatched and the
Batches tab stayed empty, because no batch is created at quantity 1.
A multi-plate file moves the run count off the modal's Quantity field
onto a stepper beside each plate (#342), hiding the field. The
cross-model submit (#671) posts that field, which in this combination
nothing can set, so it stayed at its initial 1. The modal read "19 runs
in total" above a button that queued one.
Per-plate steppers do not fit a cross-model job: its plate is chosen per
candidate, in the alternatives list, so there is one number to give.
Exclude cross-model from the per-plate mode and the global field comes
back.
Drop the plate selector in that mode too. Its choice never reached the
request; it only keyed the filament-requirements query, so picking plate
3 for a candidate while plate 1 stayed ticked above produced overrides
computed from a plate the job would not print. That query now follows
the primary file's own dropdown.
Dispatch needed nothing -- it already gives each copy its own candidate
rows -- but naming did. A cross-model job carries neither archive_id nor
library_file_id, because the candidates are the files, so both branches
that name a batch missed and every such order would have read "Batch" in
the tab the reporter went looking in. Name it after the first candidate.
The existing cross-model tests all mock a single-plate file, which is
why the pair was never covered; the multi-plate case is added.
Bambu Studio files a sliced print on the X2D's internal eMMC, which FTPS
does not serve. The bounded probe found a same-named file on the card --
an earlier slice of the same project, plate 4, against a running plate 1
-- and #1204's guard correctly refused it rather than archive another
plate's thumbnail, filament and cost.
It then blanked subtask_name because swap_plate_suffix returned None. But
None also means "this name carries no plate suffix", and such a name holds
no stale plate number to be wrong about. The project name was dropped, the
row fell through to the gcode_file path, and the archive was titled
plate_1.
Keep the name for the title only. subtask_name itself stays disowned,
because it is what every lookup here is built from and it keys
_active_prints, where the cover endpoint's own download of that same name
would find this archive and hand the contradicted file to
_recover_fallback_archive -- which checks a candidate is a readable 3MF
and never which plate it holds. A corrected name is still registered:
that one points at the plate actually running.
Also name the X2D alongside H2-series and P2S in the Archives banner, the
connection diagnostic and the storage-verdict docs -- it stores slicer
sends the same way, and an X2D owner was told the explanation did not
apply.
The two tag-link routes answered the same conflict differently. The
built-in one said "Tag UID already linked to another active spool" and
named nobody -- while holding the conflicting spool row it had just
loaded -- and Spoolman mode named the spool inside a different English
sentence. Neither was machine-readable, so a client had to parse prose
to learn which spool to look at, and could only do it in one mode.
Both now raise one shared constructor: code tag_already_linked, the
holder's id, and which identifier collided. That is the detail shape
insufficient_filament and printer_connection_failed already use, so
ApiError parses it with no frontend change.
Two active spools can carry one tag -- no unique index on either
column, no conflict check on PATCH /spools/{id}, and /spools/bulk
copies one payload including the tag into every row it creates -- and
the lookup read that with scalar_one_or_none(), which raises on two
rows. The exception escaped into the auth middleware's fail-closed
handler, so the caller was told the authentication service was
unavailable. Both lookups are now ordered and take the first row, as
get_spool_by_tag earlier in the same file always has.
Naming the lowest id means the Spoolman scan reads every row where it
used to stop at its first match, so it now reads extra.tag defensively:
that field is edited outside Bambuddy, and a single null further down
the list would otherwise take the request down in place of the 409.
The kiosk reads the new code: a refused link showed a flat "Failed to
assign spool" and now names the spool holding the tag, reusing the
inventory.tagAlreadyLinked key that no code referenced.
The button gated on tag_uid alone. A spool linked by its 32-character
Bambu tray UUID carries none -- Bambuddy splits a stored tag by length,
so a 32-char value becomes tray_uuid and tag_uid stays empty. In
Spoolman mode that is every Bambu Lab spool synced from the AMS; on the
reporter's instance, 35 of 39 tagged spools, none of which could have
its tag cleared from the dialog. The documented workaround was to edit
extra.tag in Spoolman's own interface.
Everything around the button already treated those spools as tagged.
The Tag ID column renders whichever identifier is present, and the
payload the button sends nulls both fields -- which both inventory
modes honour: the built-in PATCH applies them through exclude_unset,
and the Spoolman route keys its tag-removal branch off either field
being explicitly null.
Either identifier now enables it, and clearing still removes both.
The Finance page was the only surface in Bambuddy that read its currency
from a data row rather than the `currency` setting, and it fell back to EUR
where every other page falls back to USD. One variable drives every amount
on that page, so the personal balance, the cost-center budgets and the whole
transaction list were wrong together on any install not set to euros. It now
takes the configured currency from /settings/ui-flags, which is readable by
anyone who can see Finance -- /settings needs SETTINGS_READ, which a
cost_centers:read_own user does not have.
The backend was the other half. Of the four places that settle on a
currency, three wrote a hardcoded "EUR": the wallet the API mints on demand,
the wallet a print charge mints when none exists, and the balance returned
for a user with no wallet row at all. All four now go through one resolver,
which lives beside the rest of the balance logic.
The wallet's currency column is removed outright rather than merely ignored.
An install has one currency and nothing here converts between them, so a
per-wallet copy could only ever drift from the setting -- and a column
nothing reads is a trap for whoever finds it next. A startup migration drops
it on both SQLite and PostgreSQL, after the raw CREATE TABLE that would
otherwise re-add it on an install whose finance tables predate the ORM.
SQLite builds older than 3.35 have no DROP COLUMN and keep it, harmlessly,
since it has a default and no reader.
Saving settings now invalidates the ui-flags query too. Nothing did, so a
changed currency sat behind that query's staleTime before showing up. The
sponsor prompt's own EUR fallback is now USD, matching AppSettings.
macOS attributes Local Network permission to a code signature and judges a
launchd-spawned process on its own, rather than letting it inherit the grant
of the Terminal that started it. Homebrew ships Python unsigned on Intel, so
there is no identity for the grant to attach to: every connection to a LAN
address is dropped with no error the application can log and no permission
prompt. The printer reads as unreachable and nothing says why, and the entry
in Privacy & Security cannot be made to work because it refers to an identity
that no longer resolves.
install.sh signs during a macOS install; update_macos.sh re-checks on every
update, because `brew upgrade python` installs a fresh unsigned binary under
a new versioned path.
Both sign only what is currently unsigned. That gate is load-bearing: on
arm64 the linker ad-hoc signs every binary and the identity is a hash of the
file, so re-signing would rotate it and revoke a working grant on each update.
A python.org build carries a real Developer ID and must not be downgraded for
the same reason.
The interpreter and the framework's Python.app are both signed. The first is
what sys._base_executable resolves to and what the reporter's TCC log names;
the second is what his fix actually targeted. Which one macOS attributes
could not be established from either, and signing both costs nothing.
-----
fix(diagnostics): name the macOS permission that silently blocks the printer (issue #3114)
The port checks reported all three ports unreachable while the subnet check
passed, and port_mqtt's fix text sent the reporter after firewalls and IP
addresses. On a macOS native install that pattern has a cause neither of
those covers: no Local Network grant, denied with no error and no prompt.
A new macos_local_network check, appended on macOS only so no permanently
dimmed row appears for anyone else. It passes when the control port answered,
which is proof the permission is in place and means the signature probe never
runs on a healthy diagnostic. Otherwise it probes the interpreter: an
unsigned one gets the repair that fixes it, a signed one gets System Settings
— the arm64 case, where the identity is a hash of the binary, so a Python
upgrade presents macOS with a new application and strands the old grant.
Always warn, never fail, and only once port_mqtt has already failed, so this
can never be why a green diagnostic turns red. A printer that is simply
switched off produces the same all-ports-dead pattern, which is why the
signature, not the pattern, is what earns the specific advice. An
undeterminable signature is reported as the generic case rather than as
unsigned: that advice rewrites a file in the user's Python installation and
must not be offered on a guess.
The Network subnet check told the reporter that 192.168.98.170 and
192.168.96.9 were on different networks and to go configure routing
between them. They are four hundred addresses apart inside one
192.168.96.0/22 LAN.
An IPv4 address does not carry its prefix, and the check supplied /24
for both sides. That is the most common LAN and not the only one, and
the guess is wrong in both directions: it splits a /22 and it merges a
/25. Read the prefix off the interface that owns the address instead.
find_local_ipv4_network() enumerates every interface, including the ones
EXCLUDED_INTERFACE_PREFIXES hides. That list keeps docker0 and friends
out of the Virtual Printer's bind dropdown; here the caller is asking
about an address the kernel has already picked as a route source, and
answering "unknown" because it sits on a bridge would be a worse answer
than the truth. When nothing claims the address the check skips, which
is what it always did with no host IP at all -- it must not assert a
split it cannot see.
The same check chose which of Bambuddy's own addresses to compare by
probing a route toward 10.255.255.255, which on a multi-homed host is
not the interface the printer is on. It asks for the route toward the
printer now. On a two-NIC dev box that alone was warning about a printer
sitting on the second card's own subnet.
The probe takes IPv4 literals only. connect() on a name would resolve
it on the event loop, and _same_subnet rejects names anyway, so nothing
is lost. Resolving the prefix shells out to `ip -j addr show`, so it
moves off the loop too.
-----
fix(diagnostics): name the container engine instead of asking about Docker (issue #3092)
"Not running in Docker - not applicable", said to a Bambuddy inside a
Podman container. It reads as "you are on bare metal", and it sent the
reporter looking for his problem somewhere else.
Podman runs Bambuddy in exactly the two shapes Docker does, and the
shape is the thing that breaks printer discovery and the Virtual
Printer. detect_container_runtime() names the engine -- Docker, Podman,
Kubernetes, containerd, LXC, or a container it cannot place -- and the
check became Container network mode.
is_running_in_docker() is deliberately left alone rather than rewritten
on top of it. Three callers key real behaviour off that flag, and one of
them switches the Add Printer flow from SSDP to subnet scanning. SSDP
works for a host-networked Podman container, so answering True there
would take a working feature away to fix a sentence. Widening it is a
separate decision from naming the engine, so it is made separately.
Mode detection keeps the original signal first, which also makes the
Docker path incapable of regressing: a Docker host always has a docker0,
so a container that sees one shares its namespace, and the new rules can
only turn a warning into a pass. That signal says nothing about Podman,
which creates no such interface on a host running no bridge containers --
which is how host networking came to be reported as bridge. The general
form of the same idea answers for Podman: an interface whose iflink
equals its ifindex was created in this namespace, and a NAT-networked
container only ever receives one end of a veth pair. tun/tap is skipped,
because a container may run its own WireGuard and that tun is native to
a namespace it is not evidence of. The interface also has to be the one
the kernel just named -- sysfs is namespace-tagged but a bind-mounted
host /sys is not, and reading a colliding name's numbers would be
reading another namespace's answer.
What is still unreadable now says so and suggests host networking if
discovery is failing, rather than guessing bridge and telling a healthy
install to recreate itself. An LXC or LXD system container is named and
told the question does not apply: it is on the LAN like a small virtual
machine, so there is no network mode to recommend -- and its subnet
check still runs.
An engine we cannot name is a sentinel the frontend localizes, not a
word interpolated into thirteen other languages.
The support bundle carries the engine name beside the Docker flag, so
the next report of this shape is answerable from the bundle.
SpoolBuddy said "Unknown color" under a correctly-coloured swatch for
spools the inventory page names without trouble.
The name was never in the spool record. Bambu's RFID tags frequently
carry no readable colour name -- some carry an internal code instead --
so Bambuddy has always resolved the swatch's own hex against the colour
catalog, and the kiosk was rendering the empty column. Exactly one
SpoolBuddy file already did it right, which is what marks this as an
inconsistency rather than a kiosk simplification.
Route every SpoolBuddy colour-name display through resolveSpoolColorName,
which also stops the spools that do carry a code from showing "A06-D0" at
the user. The write-tag edit form keeps the raw stored value on purpose:
offering a derived name for editing invites the user to save it as though
they had typed it.
Spoolman has no colour-name field at all, so _map_spoolman_spool puts the
spool's subtype there and sets color_name_is_synthesized. That flag now
travels on the tag-matched broadcast, and resolveSpoolColorName takes a
third argument to honour it -- a synthesised name loses to the catalog
and survives only as a last resort. Spoolman installs were reading
"Silk+" as a colour on the Inventory page and the AMS hover card too, so
those call sites pass the flag as well.
Searching by a colour you can read on screen now finds it, in the kiosk
and in Bambuddy: the shared inventory filter matches the resolved name as
well as the stored one. That makes the filter depend on the catalog,
which loads asynchronously, so the three memoised call sites take its
version as a dependency -- without that, a query typed before the catalog
arrives keeps its empty result and reproduces the very symptom being
fixed.
The fallback label was hardcoded English in components that already
import useTranslation; it is now spoolbuddy.spool.unknownColor in all 14
POST /printers/{id}/bed-jog takes a signed nozzle-bed gap, documented since it
was written: positive asks for more room between the nozzle and the plate. On
an A1 it did the opposite. The reporter sent distance=5 for clearance and
watched the toolhead come down.
The sign had been flipped on A1 models since the original report on this issue,
where an A1 Mini owner clicked an arrow labelled "move the plate up" and watched
the nozzle dive. That is a labelling problem -- a bed-slinger's plate does not
move in Z at all, so closing the gap shows up as the toolhead descending -- and
it was solved in the transport layer, which turned a parameter documented as
model-independent into one that meant the opposite thing on part of the fleet.
Z is the nozzle-to-bed distance on every Bambu model, by definition of the
coordinate system rather than by convention: G1 Z+ opens the gap whether the bed
drops away from a fixed nozzle (X1/P1/H2, whose end G-code parks with
G1 Z{max_layer_z + 100}) or the nozzle rises off a fixed bed (A1/A2L). The
finish-photo plate restore already relies on exactly that and carries no model
branch. So distance goes onto the wire unchanged and one call means one physical
outcome everywhere: positive is the safe direction on every printer.
Which way an arrow points is a different question, about the machine in front of
the user rather than about G-code, so the printer card answers it and asks for
the gap it wants. The buttons move what you would expect them to move, exactly
as before; on a bed-slinger they now say toolhead rather than plate.
The A2L never had the old fix. It slings its bed the same way the A1 does, but
the inversion listed the A1 names and the A2L was not among them, so its up
arrow has been sending the toolhead at the plate for as long as the machine has
been supported. The new classifier also covers the alternate internal codes
A04 / A11 / A12, which LINEAR_RAIL_MODELS and SINGLE_NOZZLE_FLOW_MODELS both
carry and the old gate did not.
is_bed_slinger is gone from the backend rather than widened: with the route
model-independent it had no caller, and a kinematics helper sitting unused in
the service layer invites the next person to assume the backend handles
direction. It does not, deliberately.
Separately, the soft-endstop comments on both jog routes claimed the firmware
clamps a bare move at the travel limit. It does not, and #2579 measured that:
an H2D at its Z limit ran straight past a clean G91/G1 Z-1.00/G90, while its own
touchscreen refuses the identical move. What #2579 removed was M211 S0, which
disabled the limits globally and took the touchscreen's protection with them.
The jog popover has warned about this correctly the whole time; only the code
comments disagreed with it.
A job queued as "Any X1C" explains itself when it cannot start: the
model-based branch builds a reason for every candidate printer and puts it
on the row, so the queue shows "Busy: X1C-01" or "Waiting for filament:
X1C-02 (needs PETG)". The same job pinned to one printer showed nothing.
It sat at Pending with waiting_reason NULL for as long as that printer was
busy, which from the outside is indistinguishable from a queue that has
stopped working -- the reporter watched fourteen minutes of it while his
X1C ran a print he had started from its own screen.
The fixed-printer branch had six ways out and none of them wrote the field.
The sensor interlock (#1148) was its only writer, and it cleared the field
up front on every pass where no sensor was holding the printer, so NULL was
not an oversight on those paths but a guarantee.
Every exit now writes, through one helper. The reasons reuse the
model-based branch's vocabulary so _is_busy_only() keeps deciding what is
worth a notification: a printer that is printing, drying, or working
through the item ahead of this one reads as "Busy: <printer>" and stays
silent, because it resolves itself. A printer that is off with no Auto On
plug, and one whose plug could not switch it on, are worth saying.
A finished plate nobody has acknowledged is split out from plain busy and
named as itself. _is_printer_idle() returns the same plain False for that
and for a running print, but they are not the same thing to the person
looking at the queue: one clears itself and the other needs somebody to
walk over to the printer.
That notification fires on the transition into asking, where a busy-only
reason counts as not asking. Testing whether the item was waiting at all --
which is what the model-based branch does -- would never fire it here:
nobody's queue goes straight from idle to an unconfirmed plate, it waits
behind the print first. The cost is that a printer dropping offline,
returning busy and dropping again asks twice rather than once.
The interlock stays silent. It has never sent this notification, and a
change about what the queue displays is not the place to start.
Clearing the field up front is gone with it. It existed so a shut door
could not leave "Waiting on Enclosure Door" standing while the printer
stayed busy with something else, and the new rule carries that guarantee
instead -- whichever exit runs next overwrites it, and the dispatch path
clears it.
Two paths clear it that the report did not mention. A staged item and a
future-scheduled one skip before this branch and never reach it again, so
anything written on an earlier pass would outlive its condition for the
life of the row. That includes the filament-deficit check, which stages the
item itself.
The notification is wrapped: a queue that cannot say why it is waiting is
the bug being fixed, and a queue that stops dispatching because a provider
timed out would be a worse one.
On the frontend, the queue timeline drops any pending item carrying a
reason, on the grounds that such an item will not auto-dispatch. That held
while only the model-based branch wrote the field; "Busy: <printer>" is
now the commonest reason there is, and it describes the very chain the
timeline forecasts, so the rule would have emptied the view for anyone
whose queue is pinned. It now asks whether the reason needs the user, via
a small shared reader of the same shape the scheduler encodes.
Which job goes out, and when, is unchanged: running the previous scheduler
and this one over the same 768 states dispatches the same items in the same
order with the same statuses, across 1452 rows that now carry a reason.
The reporter's AMS-HT would not auto-dry PA6-CF, and drying the same spool by
hand worked. The scheduler reduced a tray to a preset key by splitting on spaces
only, so "PA6-CF" stayed "PA6-CF", matched none of the eight rows the preset
table has, and the tray was read as holding nothing worth drying. The AMS was
then passed over on every scheduler sweep, silently, because every caller reads
"no row" as "nothing to do for this tray".
It was never only nylon. Of the 41 types a printer can report, 33 had no row
under that rule, and 20 of those have a base material sitting right there: every
-CF, -GF and -AERO variant of PLA, PETG, ABS, ASA, PC and PA.
Doing it by hand worked because the drying popover has resolved composites since
exact key first, so a row the user added for the exact type still wins, then the
suffix, then an alias map reading PA6, PA11, PA12, PAHT, PPA and Nylon as PA.
PPA is the one alias that is a judgement rather than a spelling. Polyphthalamide
is a distinct polymer, not a grade of nylon -- but it is an aromatic polyamide,
it takes up moisture the same way, and PA's row is the hottest the table has.
A material with no row and no alias is still skipped rather than dried at a
number nothing here can source. That is where this parts company with the
popover, which falls back to PLA because a dropdown has to show something.
The table is user-editable JSON, so a preset row can be present and empty. That
has always meant "skip this material" and still does: the temp and hours reads
fall back per field to 55C/12h, which would dry a PLA spool at 55 degrees.
Two more callers had the same line and move with it: per-filament humidity
thresholds, where the override set for a material never applied to that
material's composites, and the chamber preheat target, which had the suffix half
of this from #2902 but not the aliases.
The preheat test for that half reimplemented the lookup inline rather than
calling it, so it would have passed whatever the function did. It calls it now.
The reporter's P1S had the sliced file on its card and was serving it. The 19MB
transfer just did not finish inside the budget while the printer was also running
its camera, its status messages and the upload of the job itself. Bambuddy wrote
an empty fallback archive and never looked again -- then downloaded that same file
successfully three times over the next two minutes and discarded every copy,
because the only code that would have attached one had already run.
The recovery machinery was there. It was armed for exactly one give-up, the FTPS
cool-off, on the grounds that the three storage verdicts are settled: a job on
internal eMMC never appears at any FTPS path, and sweeping for it again is what
where the file is demonstrably still on the card.
The sweep already had the signal and never used it. A file that is genuinely not
there is answered with 550, which surfaces as FileNotOnPrinterError and is caught
by name; a timeout returns falsy instead. So "the printer says no such file" and
"we never got a straight answer" are distinguishable without guessing, and only
the second schedules anything.
Not scheduled either for a 3MF that downloaded fine and turned out to be another
plate's. Recovery checks that a candidate is a readable 3MF but not which plate it
holds, and the names a retry would use are the same stale ones that fetched the
contradicted file -- so it would put back exactly what #2957 discards.
The ladder follows the cause: a cool-off has to expire, so its first attempt sits
past the 300s; nothing has to expire here, and this reporter's file completed 48
seconds after the budget was spent.
The archives banner gets its own wording for this, because the old text sends an
owner whose card is working to switch on a setting that is already on. It names
the Connection Timeout setting instead.
A jam can destroy everything on the plate while the printer still reports the
job as a success, so the honest count of usable parts is zero. The edit dialog
floored the field at one, and a project's completed-items count sums that
column, so there was no way to record that a job produced nothing.
The floor was in the dialog only; the API stored whatever it was given, which
also meant a negative count was accepted and would have subtracted from the
project totals. The column is now bounded at zero instead.
Filament Trends counted prints as `quantity || 1`, which would have read a
deliberate 0 as "unset" and charged the ruined plate as one print while the
project page counted none.
@vitest/mocker registers a redirect mock's target without checking it
against Vite's file-serving allowlist, and the load hook then returns
readFile(mock.redirect) as the module source. The target is built as
join(root, new URL(redirect).pathname), which confines nothing -- a
non-special scheme keeps ".." in pathname, so the join resolves outside
the project root. GHSA-82fw-gwwq-j7x9, CVSS 5.9, CWE-22.
Not reachable here. The unauthenticated path is the public mockerPlugin
and interceptorPlugin exports, which attach to Vite's unauthenticated HMR
socket for the benefit of third-party dev servers; nothing under
frontend/src imports either. Browser mode, which registers over a
token-authenticated RPC, is not installed -- @vitest/browser is an unmet
optional peer -- and vitest.config.ts runs plain jsdom, so no dev server
listens during a test run. Both packages are devDependencies and reach no
shipped artifact.
vitest and the eight @vitest/* packages go 4.1.8 -> 4.1.11, carrying
es-module-lexer, expect-type, obug, std-env, tinyexec and tinyrainbow.
Fifteen lockfile entries, all dev-scoped, none added or removed. The
^4.1.8 range already admitted the fix, but the declared floor is raised
so a regenerated lockfile cannot resolve back beneath it. No src change,
so the bundle is byte-identical and static/ does not move.
An X2D with two AMS 2 Pro, one per hotend, showed a K value on every slot
of the first and nothing on any slot of the second. Configure Slot was
worse than blank there: the picker offered no matching profile, the slot
read as though nothing were bound, and choosing one changed nothing the
user could see. Both symptoms are one rule.
A calibration index can mean two different profiles on a dual-nozzle
machine -- on the maintainer's H2C, index 16 is the left hotend's black
PLA at K=0.018 and 15 is the right's at K=0.020 -- so the index is
resolved against the slot's own hotend, and a miss shows nothing rather
than the other nozzle's number. That is right whenever the printer files
its calibrations per hotend. This one files them per filament: the second
AMS's slots point at the same entries as the first, every entry tagged
with one extruder, and requiring a match found nothing at all.
The hotend now has to appear in the table the printer actually sent
before it is used to narrow anything. Where it does not, the index stands
on its own, which is what BambuStudio does for this same card --
AMSItem.cpp resolves it through get_pa_k_n_value_by_cali_idx, matching
cali_idx and nothing else. Where it does, nothing changes: the H2C case
still blanks rather than borrowing, and the other hotend's profiles stay
reachable under Other K profiles. The relaxed path still refuses an
answer when the candidates disagree on a value.
The premise that the table is always numbered per nozzle had been written
into three comments and two layers of code; it is corrected where it
appears.
Alongside it, in the same picker: the K-profile options rendered the
hotend suffix twice in the matching group and three times under Other, so
every option on a dual-nozzle printer read "... . Left . Left".
Turning Shortest Job First on reordered the pending list and the
scheduler, and left the Timeline drawing the pre-SJF queue for good. It
chained each swimlane's bars by queue position alone and was never told
the setting existed -- so the one view whose whole job is to say when
each print will run was the one view answering for an order the
scheduler had no intention of using.
Bars now chain in the order the scheduler will dispatch: jumped items
first, then shortest print time with an unknown duration last, then
position. The starvation guard is visible there too, so a long print
that has finally come up reads as next rather than staying buried behind
every short job on the lane.
Three surfaces claim to show queue order -- the pending list, the "if
started now" ETA, and the Timeline -- and each had its own copy of the
comparator, which is how one of them came to be missing a whole clause.
They now share one, written against the scheduler's ORDER BY.
Grouping came along with it: the pending list folded a model name down
to its first character to build a lane key, so Any X1C and Any X2D both
landed on -88 (as did Any P1S and Any P1P) and the two lanes interleaved
into a single run of rows.
Backend untouched. The scheduler was dispatching correctly the whole
time; only the drawing of it was wrong.
maziggy