3 Commits

Include renames

Author	SHA1	Message	Date
maziggy	7b181b84f0	Let a filled or foamed filament keep its own name (issue #2902) ... The reduction that gave an AMS slot a material type read PLA-AERO, PLA-GF, ASA-GF and PPS-GF as their base material, so a slot loaded with foaming or glass-filled filament went out saying plain PLA or ASA. That is worse than the bug it replaced. "PLA-AERO" matched nothing before, which was useless but honest; "PLA" matches every PLA plate in the queue, so the dispatcher would have sent one to filament that will not print it -- and the contract the first fix claimed, that it could only ever repair a slot, no longer held. @doncaruana caught PLA Aero on the issue. All four are values Bambuddy itself offers: filament_fields.json is the material list the Profiles editor puts in a dropdown, and the reduction table was assembled from the cloud filament names and the frontend preset parser without ever being checked against it. It is checked now, so the next type added to one and not the other fails a test rather than a print. ASA-AERO joins them from the cloud catalogue (GFB02). The table hyphenates because the slicers do, while a spool says "PLA Aero" and every Bambu preset name says "Bambu PLA Aero". Adjacent words are joined and taken when the join is a type exactly -- exactly, because letting the prefix and suffix rules reach across a space would make "Support for PLA" a type by its tail. Also from @doncaruana, and the better half of his point: a preset is chosen from a list the slicer defines, so it already knows its own type and nothing has to be read out of a product name. The resolver now hands that answer back and both assign routes prefer it. It cannot be the only source -- material is required on a spool and slicer_filament is not, and the spool this issue was reported for had no preset at all -- so the reduction stays as the fallback for spools without one. Two things had to move with it. The auto-unlink guard compared the slot's reported type against the reduced material, so a spool whose preset outranked its material column would have been unlinked from the slot it had just been assigned to; it now accepts any type the assign path could have written. And two lookups keyed by material took the catch-all for a type they had no row for, which sent an ASA-GF spool out at 200/240 -- too cold to extrude -- and preheated its chamber to nothing. Both fall back to the base material last, so PLA-CF, PETG-CF and PA-CF keep the rows they are listed with, and ASA-CF and ABS-GF pick up ranges they had been missing all along. What counts as a material name is decided by the base for the same reason: saying yes throws the value away and rescues the slot from the generic-material fallback, so the answer has to be no when that fallback has nothing to offer. ABS-GF reduces to a generic ABS the printer can resolve; PPS-CF reduces to nothing and is left as it stands. Adding a type to the table therefore cannot quietly change that answer, which is how these five slipped through in the first place. ------ Hand the bundled chamber-preheat table back the way it is read Every lookup of the per-filament chamber map happens after the keys are upper-cased, and the parser documents exactly that: keys uppercased, DEFAULT always present so the resolution loop can index it unconditionally. The three fallback paths returned the bundled constant as declared, with the lowercase "default" row the Settings editor writes and displays, so an install that had never opened the setting got a dict the loop could not read its fallback out of and used a hardcoded 0 for any filament without a row of its own. It reported the right number only because that bundled default is 0. Raising it would have changed nothing for everyone who had not customised the map, with the map in Settings still showing the value that was not being used. The test that should have caught this asserted the fallback under either spelling, and its docstring contradicted itself between title and comment. It pins the contract now, over all four ways the parser can fall back.	2026-08-23 10:36:50 +02:00
maziggy	88e8ca81c3	Give an AMS slot a material type, not a product name (issue #2902) ... Assigning a spool wrote its material straight into the slot's tray_type. A slot that says "PLA+" satisfies nothing that asks for PLA: not OrcaSlicer, not Bambu Studio, and not Bambuddy's own dispatch matcher, which compares the type the printer reports to the one the 3MF declares as plain equality. The reporter's slot was unusable for every PLA plate he had. Not only a label, either. The same string went into the generic-filament lookup, which missed, so the slot went out with no tray_info_idx at all -- the half-configured state #2604 documents the printer as reverting from -- and took the 200/240 catch-all nozzle range instead of PLA's 190/230. PLA+ is not a special case. Bambuddy's own colour catalogue supplies the material dropdown, and around forty of its values are vendor product lines rather than filament types: HTPLA, PolyTerra PLA, PLA Matte, ASA Extrafill, Flexfill TPU 98A. So the four routes that configure a slot reduce the material to a name the printer knows before sending it, and the product name moves to tray_sub_brands -- which is where Bambu Lab puts it too: their catalogue carries a preset named "eSUN PLA+" whose type is PLA. A name the reduction cannot place is sent exactly as before rather than guessed at, so this can only repair a slot, never break a working one. The spool's own wording still leads the id and temperature lookups with the reduced type appended behind it, so "PETG HF" keeps its own generic preset (GFG96) rather than being traded down to plain PETG's. Two guards decide whether a candidate filament id is really a material name -- the resolver's, which discards one, and slot reuse, which will not carry one forward. Both saw only bare types, so "PLA+" passed as a filament id. They share one answer now, which also refuses to read an id-shaped value: "GFPLA" ends in a material name, and reducing it would throw away the calibrated preset in the slot. One thing had to move with it. on_ams_change auto-unlinks an assignment whose slot stopped looking the way it did when the spool was assigned, and the check that spares a slot Bambuddy itself reconfigured compared the printer's reported type against the spool's raw material. With the slot now carrying the reduced type, every spool this issue is about would have been unlinked from the slot it had just been assigned to. Both sides are reduced there -- the printer's too, so slots configured by an older version, still reporting "PLA+", keep matching. Something starts working as a result: a slot holding a calibrated preset is reused when a same-material spool is assigned to it, which could not happen for these spools while "PLA" and "PLA+" compared unequal. Reverting any one of the behaviours above fails a distinct test -- the reduction's four matching rules and its pass-through contract included, since that contract is what makes the rest of it safe.	2026-08-22 11:41:28 +02:00
maziggy	9f4f16e5bd	fix(spoolman): split mid-print usage across AMS backup switch (#1793) ... usage_tracker's tray-switch split has never had a Spoolman peer. An AMS same-material runout switch mid-print charged the whole slot to the origin spool via the (via tag) path and double-credited the backup via remain-delta — origin exceeded initial_weight. Extract the segment-math into utils/tray_split.compute_tray_split_grams and call it from both writers so the two inventory backends attribute mid-print switches identically. spoolman_tracking gains _report_spool_usage_split_by_tray_changes; the Path 2 remain-delta fallback now skips trays the split path covered, killing the double-count.	2026-07-01 09:50:30 +02:00