setInterval does not await an async callback. Slicing a large project
blocks the backend for seconds, so poll ticks piled up behind one stalled
request, each holding a snapshot taken while the job was still active.
They resolved together, and every one of them ran the completion path —
one toast and two query invalidations each. A 20s stall against the 1.5s
interval produced 13 "Sliced X" toasts from a single slice.
Only one poll round is now in flight at a time, which also stops queueing
requests against a backend that is already saturated. Completion is
recorded once per job id, and a round still awaiting a response when the
effect tears down now returns instead of acting.
Slicing for a P2S failed with "filament preset Bambu PLA Basic @BBL X1C 0.2
nozzle (slot 1) is not compatible with printer Bambu Lab P2S 0.4 nozzle" —
naming a profile shown nowhere in the dialog. The picked profile was
"Overture PLA Matte @0.2", whose inheritance chain roots in that X1C profile.
The dialog classifies a profile by its compatible_printers list and falls back
to reading the printer out of its name. That name carries no model, and the
list — present on the imported copy — is not shipped by every source: Bambu
Cloud omits it deliberately (rate limits), and Orca Cloud shipped it but
Bambuddy only mined filament type and colour from the same content.
Orca Cloud entries now carry their own compatible_printers, and the existing
same-name enrichment bridge carries the list onto entries that lack one, in
both directions between the cloud tiers. A bare "@<size>" name tag is read as
a nozzle size as a last resort: it can rule a printer out but never rules one
in, and implausible values are ignored rather than guessed at.
Three bugs on the same PLA-model + PVA-support flow, discovered in
sequence:
(A) substitute_unused_plate_filaments inspected only object geometry
(per-object extruder metadata + paint_color triangles) so a support-
only slot was silently treated as "unused" and the user's PVA profile
got overwritten with slot 1's PLA.
(B) _extract_filament_info stripped filament_is_support==1 entries,
hiding PVA from unsliced source archive cards even when the project
explicitly configured it.
(C) --load-settings is authoritative over the source's project_settings.
config, and Bambu's shipped process presets ship enable_support=0
(supports are a per-print decision, not per-quality). So even with
(A) fixed, the sliced output had supports disabled and the PVA slot
loaded but never consumed. Inverts BambuStudio GUI's semantics where
the project overrides the preset.
Fixes:
- New extract_support_filament_slots_from_3mf reads enable_support +
support_filament + support_interface_filament from project_settings.
config; substitute_unused_plate_filaments unions it into the geometry-
derived set.
- _extract_filament_info returns all configured filament types + colours.
- New _patch_process_support_settings overlays four fields (enable_
support, support_filament, support_interface_filament, support_type)
from the source 3MF onto the picked process preset JSON before
--load-settings sees it. Deliberately targeted to what fixes#1881
without widening to a full project-over-preset merge.
Re-slicing a 3MF authored for a single-nozzle printer (X1C, P1S, A1, P2S)
onto a dual-nozzle printer (H2D / H2D Pro) — or vice versa — previously
failed with "G-code in unprintable area of multi-extruder printers" (the
source's bed-coordinate layout lands in the H2D's per-nozzle dead zone)
or, on multi-color projects, a hard SIGSEGV inside the slicer's ZFiller
polygon-clipping. Earlier shipped a fail-fast 400 guard; this drop lifts
it and actually does the conversion by forwarding the sidecar's existing
--arrange flag when the source and target nozzle classes differ. BS
itself reconciles the embedded project_settings.config against the new
printer that way, the same way the GUI's "Switch Printer" operation
does. The guard becomes a kept-for-compat no-op.
Slice-all-plates added to the SliceModal: a checkbox for multi-plate
sources sends plate=0 to the backend, which forwards --slice 0 to the
BS CLI. Same-class slice-all produces one multi-plate output 3MF in a
single sidecar call. Cross-class slice-all loops per plate (BS's
--arrange is project-wide and would otherwise consolidate every plate's
objects onto one bed) and merges the per-plate outputs into one
multi-plate 3MF locally via the new merge_plate_3mfs helper. The toast
shows "Plate 2 of 5 — Generating G-code (47%)" through the loop.
Three side fixes surfaced during testing:
- substitute_unused_plate_filaments overwrites unused-slot filaments
with the slot-1 selection before slicing so BS's loaded-filament
temperature validator doesn't reject a PLA print whose unused slot 2
defaulted to ABS in the dropdown
- re-sliced archive thumbnail now prefers the source's per-plate
render (Metadata/plate_N.png) over the project-wide MakerWorld cover
art, because BS CLI with --arrange skips writing a fresh per-plate
preview
- re-sliced archive bed_type now lifts from the sliced output's
curr_bed_type onto the PrintArchive column the card actually reads
Schema: SliceRequest.plate range relaxed from ge=1 to ge=0 to admit
the "all plates" sentinel; SlicerApiService.slice_with_profiles /
slice_with_bundle take an `arrange` parameter.
Tests: 26 in test_slicer_3mf_convert (count / merge / substitute /
extract), 3 in test_slicer_api (arrange wire format), 9 in
test_library_slice_api (guard no-op, bed_type lift, thumbnail
fallback, new cross-class slice-all loop integration test), 2 in
test_archive_service (Auxiliaries fallback), 4 in SliceModal.test
(plate=0 toggle), 2 in SliceJobTrackerContext.test (multi-plate toast
prefix). 659 backend + 42 frontend green; backend ruff clean,
frontend build clean, i18n parity green at 4984 keys × 9 locales.
maziggy