Each hourly energy snapshot records the price, and the energy used until the
next one is costed at it. Prints and the Statistics energy cost follow the
price over time instead of applying one price after the fact. The price can
come from a Home Assistant sensor, read hourly and at print start and end.
Energy multipliers now accept any value above zero, for plugs that report
watt-seconds.
A printer kept dark between uses showed a black live view and sent black
notification photos (#1655). Settings → Camera can turn the light on for
all printers or for selected ones, for the live view, notification
photos, the finish photo and the snapshot API that Home Assistant uses,
and turns it off 15 seconds after the last use. It only turns off a
light it turned on, and switching the light by hand hands it back.
Snapshots wait an adjustable delay after the light comes on. Timelapse,
the Obico check and the in-print frame bank don't switch it, since they
would make it flash.
The camera card no longer lists every printer: external cameras are
added from a searchable printer picker and only those printers are
listed, so large farms get a short page.
Fetch a signed feed.json from the public bambuddy-notifications repo on
GitHub at startup and every 6 hours. Nothing about the install is sent;
targeting (version, beta channel, install type) is decided locally.
- Ed25519 against a key built into the app; an older serial is refused so a
withdrawn message can't come back. The feed replaces the stored list, and
a failed or rejected fetch keeps the last good one.
- Sidebar entry above System with an unread count, a slide-over list, and a
banner for unread important/critical messages. Read state per user.
- Admins by default; Settings > General > Updates can show them to all
users or switch them off, which also stops the fetch.
- Plain text only; links to github.com and bambuddy.cool only.
Back-to-back prints in chamber-heated materials (ASA, ABS, PA, PC) each paid
a full heat-soak from cold, even when the print that just finished had left
the chamber at temperature. Two changes remove that cost.
Keep bed warm between prints
While a printer sits in FINISH awaiting plate-clear and the next queued item
needs chamber heat, hold the bed hot so the chamber does not cool during the
bed-clearing window. The bed is the chamber's heating element here, not a
print surface, so the hold runs at the new `queue_keep_warm_bed_temp`
(default 90C, which also satisfies bed-threshold-linked aftermarket chamber
heaters), raised to the item's own bed temperature when that is higher.
Gated on `queue_keep_bed_warm` AND `require_plate_clear` AND
`preheat_enabled`, all re-checked in the backend so a stale UI cannot leave
the feature running. `queue_keep_warm_max_minutes` (default 120) bounds the
hold: when it elapses the bed is switched off and the hold latches until the
printer is next a candidate, so a plate nobody clears cannot leave the bed
hot indefinitely. The hold is also released when the item is deleted, the
queue empties, or a gate is toggled off mid-hold, and never when firmware
reports a target other than the one it set — a temperature the user or a
print changed is left alone. Publishing is idempotent.
Smart soak reduction from chamber history
The scheduler samples each connected printer's chamber temperature every tick
into a 2h rolling history. Preheat credits time the chamber has already spent
at temperature against the configured soak, shortening or skipping it.
Credit starts no earlier than the newest sample, the most recent unbroken run
of samples, or the end of the last real dip below target. A dip only counts
once it outlasts a grace period: an enclosed chamber cannot lose and regain
several degrees quickly (measured on an X1C, cooling from 55C to below 48C
takes 23-73 minutes, ~0.2 C/min), so a brief low reading is a door opening or
sensor noise rather than lost soak — and a plate swap, which is exactly when
keep-warm runs, produces one. A stale history credits nothing: at that
cooling rate the chamber can cross the threshold unobserved, so the full soak
runs instead.
Three supporting changes to preheat itself:
* Cancelling or deleting a queued item now stops a preheat already running
for it. Those routes only write `status` to the database, which a dispatch
coroutine parked in `asyncio.sleep` cannot observe, so the heaters ran for
the rest of max_wait + soak — 45 minutes at the default settings — and the
printer stayed in `busy_printers`, blocking every other queued item behind
a print that was not happening. The routes now signal the scheduler
directly, and the stage sleeps in slices so it notices promptly and
abandons the dispatch, letting the existing rollback shut the heaters off.
* A chamber-heated print whose slicer metadata carries no bed temperature
(common for Orca-exported 3MFs) used to skip preheat entirely and start
with a cold chamber. It now heats the bed to `queue_keep_warm_bed_temp`.
A parsed bed temperature still wins, and a print with no chamber
requirement still skips — no bed temperature is invented for the print
itself. Preheat's bed target is transient regardless: the print's own
gcode issues its M140/M190 at start.
* Preheat records which commands it sent (bed, chamber, airduct) and unwinds
them if the dispatch aborts before the print starts — a failed upload, a
cancelled item, an exception — instead of leaving the printer heating for
a job that is not happening.
Slicing from Bambuddy meant taking a process preset as-is; any change
meant a round trip through Bambu Studio. The slice dialog now carries
OrcaSlicer's full process tree -- pages, groups, labels, tooltips,
ranges and defaults extracted from the slicer's own sources.
Enable/disable rules are evaluated from the slicer's own enable_if
expressions via a recursive-descent interpreter (no eval, CSP), with
enum comparisons validated against each option's declared values.
Anything undecidable leaves the field editable rather than greyed.
Overrides apply after the source's support config (#1881) and the
designer's carried tweaks (#2622), so an explicit choice always wins;
an untouched panel sends the same request as before.
Adds slice_engine as a separate setting from preferred_slicer -- where
slicing runs is a different axis from which binary the sidecar drives.
Only the sidecar engine is registered, so no picker renders yet.
The printed command only works from the directory holding the compose
file, which is the thing the user came to the page not knowing. Adds a
copy button, a saved Compose directory setting, BAMBUDDY_COMPOSE_DIR,
and best-effort detection from a bind mount's host path.
Compose records the directory on every container it creates, but reading
that label needs the Docker socket mounted in — root-equivalent access
for a convenience string. The mountinfo guess is a prefill only: its root
field is relative to the mounted device, so a compose dir on its own
mount loses that prefix, and nothing in the container can detect it.
The field is restricted to path characters. It is the one setting whose
purpose is to be pasted into a root shell, so "/opt/bambuddy; rm -rf /"
would otherwise render as a plausible update command.
Every field that takes a chamber target stopped at 60: the per-filament
chamber map and per-print override in Preheat & Heat Soak, the chamber
quick-select presets, and the printer-card chamber control. 60 is the
X1E's ceiling and the X1E was the only heated-chamber model when that
limit was written; the H2 series and X2D heat to 65, so the top of their
range was unreachable.
The ceiling now lives in one constant per side (MAX_CHAMBER_TEMP_C in
backend/app/utils/printer_models.py and frontend/src/utils/printer.ts)
rather than as a literal at each call site. X1E firmware clamps a higher
request to its own maximum, so a shared ceiling is safe.
Also fixes a live bug at PrintersPage.tsx:7985: parsePresetTriple was
bounded to 60 there, and it rejects the whole triple on any out-of-range
entry, so a saved 65 preset would have silently reverted the printer
card to the defaults while Settings still showed 65.
A heavy MakerWorld model — one Bambu Studio also takes a long time over —
failed after five minutes with "Slicer sidecar unreachable". The sidecar
was reachable the whole time and still slicing when we hung up on it.
SlicerApiService carried a hardcoded 300s timeout, passed to httpx as a
bare float so it covered connect, read, write and pool alike. On a single
long request that is not a health check, it is a cap on how long a model is
allowed to take. And because httpx.ReadTimeout subclasses RequestError,
expiry landed in the same handler as a refused connection and was reported
as an unreachable sidecar — so the reporter went and updated their sidecar
container, which was never the problem.
The information to do better was already being collected. _poll_progress
polls /slice/progress/{id} once a second alongside the blocking POST to
drive the live progress toast, so at minute five Bambuddy had fresh
evidence the slicer was working. It killed the request anyway.
So the read timeout comes off the HTTP call and the poller supervises
instead: the deadline moves forward on every progress update, and only
genuine silence ends the wait. A model that keeps reporting runs to
completion however long it takes. Connect and pool keep short timeouts —
a sidecar that will not accept a connection is unreachable and should
still say so quickly.
Only a *changed* progress payload counts as alive. The sidecar re-serves
its last snapshot on every poll, so counting repeats would leave the
watchdog unable to detect a stall at all.
The window is floored at three poll intervals: liveness can only be
observed as fast as the poller ticks, so anything shorter would expire in
the gap between two polls and fail every slice instantly.
New setting slicer_stall_timeout_minutes (Settings > Workflow > Slicer),
default 15, range 1-240, alongside the sidecar URL and gated on
use_slicer_api like its neighbours. Sidecars too old to report progress
have no liveness signal, so for those the same number bounds total elapsed
time — the old behaviour, configurable and no longer 300s flat. The
message says which case applies and where to change it.
SlicerTimeoutError is its own type and maps to 504, not 502: the sidecar
answered throughout, we stopped waiting. Connection failures keep
SlicerApiUnavailableError. The preview slice path gets the same treatment.
Obico's ml_api container takes an optional ML_API_TOKEN environment variable.
With it set, ml_api/auth.py answers a bare 401 to any request whose
Authorization header isn't "Bearer <token>"; with it unset it ignores the
header entirely. Bambuddy never sent one, so pointing it at a protected server
meant deleting the token there — which the reporter had set for their Home
Assistant integration and did not want to undo.
Settings -> Failure Detection gains an ML API Token field. When it is empty no
header is sent, so an unconfigured install's request stays byte-identical to
what shipped before the setting existed.
This failed in the worst possible way, and that is the more important half of
the change. Obico decorates /p/ with token_required but leaves /hc/ open. Test
Connection pinged /hc/, so it reported success against a server that was
rejecting every real detection call, the settings looked right, and detection
silently never ran. The only symptom was a generic "ML API call failed" buried
in the status card.
So the test now proves what it claims. After health passes it probes GET /p/
with no img parameter: the auth decorator runs before the handler, so 401 means
the token was rejected and 422 ("Invalid request params") means it was
accepted. No inference work is done either way. A probe that itself errors
reports the token as unknown rather than as working — the UI says it could not
be checked instead of claiming success.
The detection loop checks for 401 before raise_for_status, so a rejected token
is reported as a rejected token, naming the setting and the environment
variable, instead of surfacing "401 Unauthorized" with no hint of what to do.
The message never contains the token; a test pins that.
The setting name carries "token", so the support bundle's keyword redactor
masks it with no new rule. Resolving "field omitted" to the saved token is the
route's job, keeping test_connection a pure outbound call with no database
access.
Second fix, same issue: support bundles misreported which printers Obico
watches. The bundle split obico_enabled_printers on commas and read an empty
value as "no printers". The settings UI writes a JSON array, and empty means
*all* printers — the default — so a working Obico setup showed obico_enabled
false against every printer in its own bundle. That is the reporter's bundle
exactly, and it points anyone reading it at the wrong subsystem. The bundle now
parses the setting the way ObicoDetectionService does, keeps a comma fallback
for any install that stored the legacy shape, and factors in the global switch.
The photo fired the moment layer_num reached total_layer_num. That edge is
where the printer *starts* its final layer, not where it finishes it: the
reporter's H2C capture shows it arriving at 92% with mc_remaining_time=2,
three minutes and seventeen seconds and one filament change before the print
actually ended, so the frame caught the toolhead mid-print over the model.
The trigger also latched _finish_photo_captured, which locked out both the
stage-22 and FINISH triggers for the rest of the print — so on firmware that
never reports an end-of-print filament unload (H2C and A1 Mini confirmed)
nothing could replace the bad frame.
Remove the last-layer trigger. The photo is now taken at the FINISH-state
trigger, which every model sends and which lands after the toolhead parks.
Since Bambu's end G-code drops the plate ~100mm just before that, restore the
framing before capturing: absolute G90/G1 Z to max_z_height + 10mm clearance,
settle, capture, then drop it back so the print is as reachable as the printer
left it. Absolute is the safety argument — that Z is a height the toolhead
occupied seconds earlier, so it is inside the travel limits by construction and
leaves the nozzle above the part, and it is unambiguous across model families
because Z is the nozzle-to-bed gap whether the bed moves or the toolhead does.
M211 is never touched (#2579). This is what #1145, #1397 and #1565 asked for.
The height is only trusted when two independent sources agree: the archive is
matched by the finished print's subtask_name by equality (not LIKE, so "Cube"
cannot resolve to "Cube v2"), and its layer count from the 3MF must match the
layer count the printer reported over MQTT. Matching on "most recent archive
for this printer" was not safe — on_print_complete pops the _active_prints
binding concurrently, and a print Bambuddy failed to archive would have
resolved to its predecessor. A wrong height is the one failure that could drive
the nozzle into the model.
The move is additionally skipped when the print height is unknown, when a queue
item is pending for the printer, when the printer has left FINISH, and when the
new finish_photo_restore_plate setting is off.
for every FINISH-state capture — which is what shipped the mid-print photo —
the bank is used only when the dispatcher recorded that it injected End G-code
into this print, since a SwapMod snippet may have ejected the plate. The flag is
handed over in two steps (mark_pending at dispatch, adopt at print start) so it
can never outlive its print: a job started from the slicer or SD card adopts
False rather than inheriting its predecessor's answer. Those prints also skip
the plate move outright, bank or no bank.
The bank now refreshes on mc_percent advances as well as layer changes, via a
new on_print_progress callback. Layer changes stop the instant the final layer
begins, which left the #1867 fallback frame stale by the whole length of that
layer; progress keeps ticking there and freezes before the End G-code runs, so
a swapped plate still cannot reach the bank. The last-layer throttle exemption
is dropped, since it would now fire a grab on every percent tick.
On the timelapse path the moment producer returns early, so the consumer does
the restore itself before its live-grab fallback — the documented usual outcome
on P1-series, where the video has not transferred by the time the notification
goes out and the shipped photo was of an already-dropped plate. The two waits
are now derived from the settle window and the video poll timeout rather than
hardcoded; at the old flat 75s that fallback was guaranteed to be cut off
mid-settle.
extract_max_z_height_from_3mf reads only a bounded prefix of the plate G-code,
since a sliced plate is routinely tens of megabytes and the header is ~40 lines.
It returns None for missing, unparseable, zero and negative values so callers
must treat "don't know" as such rather than defaulting.
Bed levelling, flow calibration, and nozzle-offset calibration were on/off
only, so the sole way to run bed levelling was to force a full level before
every print. Bambu Studio has always offered a third "Auto" state that lets
the printer skip the calibration when it was done recently -- the state most
users actually want. Make these three options tri-state (off/on/auto),
defaulting to auto, and leave vibration/layer-inspect/timelapse as on/off
(Bambu Studio exposes no auto for those).
Wire encoding follows Bambu Studio's source exactly: each option sends a JSON
bool (true only for "on") plus a companion int -- off=0, on=1, auto=2. The
bool fields stay booleans (the #1478 H2S regression); only the companion int
widened from {0,1} to {0,1,2}. #1721's observation that stage 8/39 stays
queued when sending 2 is the auto contract (queued, skipped at runtime if
recent), not a broken "off".
- schemas: TriState = Literal[off/on/auto] with a BeforeValidator coercing
legacy bool / 0-1 / true-false so old clients and un-migrated rows validate
- model + migration: boolean columns -> String; SQLite via column affinity +
data backfill, PostgreSQL via ALTER COLUMN TYPE guarded on information_schema
(verified on both dialects); settings rows normalised true/false -> on/off
- MQTT: start_print takes the tri-state strings and emits the paired bool+int
- Virtual Printer: reconstructs the slicer's auto/on/off from the int companion
(auto_bed_leveling / extrude_cali_flag) in both capture paths
- frontend: CalibrationMode type; off/auto/on segmented controls in the print
dialog, queue bulk-edit, and Settings -> Workflow; calibrationMode_* strings
in all 11 locales
The reporter's 19-printer farm started prints "one by one", up to an hour apart.
check_queue awaited each dispatch inline, and a dispatch includes the FTP upload,
so every printer queued behind every other printer's transfer despite being an
independent machine. His logs give the arithmetic: 40978500 bytes in 254.1s,
157 KB/s - a Bambu printer's SD write, not the network, is the bottleneck. Nineteen
of those in series is ~80 minutes, and the next upload started 131 ms after the
previous one finished. The delay is linear in fleet size, which is why it got worse
the more printers he selected.
Dispatch is now collected during the (still sequential) selection loop and run
concurrently afterwards, capped by queue_max_concurrent_uploads - Settings ->
Workflow -> Queue & Dispatch, default 4, 1 restores the old behaviour. Every gate
is untouched; only the transfers overlap. The pass still awaits its uploads before
returning: _start_print flips the row pending -> printing only after the upload,
so an early return would let the next tick re-dispatch the same rows.
FTP work moves to its own thread pool. It was on asyncio's default executor -
min(32, cpu+4), six threads on a 2-core NAS, shared with everything else - which
was survivable only while uploads were serial.
Two problems the same bundle exposed:
A printer that accepts project_file but never starts (#1678) was retried forever:
270s watchdog, revert to pending, re-upload the whole file, repeat. Hence his
"printer who, since the morning, still not launch" - and on a farm each lap also
eats an upload slot the other printers are waiting on. Attempts are now counted on
the queue item; after three it fails with a message pointing at the printer instead
of queueing a fourth re-upload.
The debug bundle we asked him for held 4m49s of history. The push_status dumps fired
on every frame rather than on change - several while their own comment claimed
otherwise - which is 27,727 of the bundle's 29,830 lines and rolls 5 MB in under five
minutes on 19 printers. They now log transitions only. The bundle also read just the
live log while three rotated backups sat next to it, under a byte budget four times
larger than the file it was reading.
Migration verified on SQLite and Postgres: idempotent, backfills legacy NULLs
(dispatch_attempts + 1 is NULL for a NULL row, which would silently disable the cap).
Tests: 6 on concurrent dispatch (overlap, cap honoured, 1 == serial, default applies
with no settings row, a failed printer does not cancel its siblings, no early return),
4 on the retry budget, 6 on the bundle's rotated-log span, 7 on the debug gating.
Each verified to fail against the unfixed code - the first end-to-end log assertion I
wrote passed without the fix and had to be tightened.
New scheduler stage that heats the bed (and the chamber, on supported
printers) and holds at temperature before each queued print starts —
the heat-soak engineering filaments need for adhesion and warp
control. Bambuddy waits between FTP upload and start_print, so the
soak runs while the printer is otherwise idle. M191 is silently
ignored by Bambu firmware, so doing this at the orchestration layer
is the only place it works.
Resolution order at dispatch:
1. PrintQueueItem.preheat_override ∈ {inherit, on, off}.
'off' skips entirely; 'inherit' falls back to the global
preheat_enabled toggle; 'on' forces the stage even when the
global is off.
2. chamber_target = item.preheat_chamber_target_override
?? max(filament_map[normalize(t.tray_type)] for loaded slots)
?? 0.
Mixed PA+PLA picks PA's 50 (max-across-slots — PA's chamber
requirement is binding, PLA doesn't suffer being warm). PLA-only
derives 0 and skips the chamber phase automatically.
3. Three hardware tiers for chamber heat:
- Active chamber heater (H2C/H2D/H2D Pro/H2S/X2D/X1E) → M141 +
chamber-sensor wait
- Chamber sensor only (X1C/P2S) → no M141, passive bed-radiation
wait with hard max-wait cap
- No chamber sensor (P1S/P1P/A1/A1 Mini) → bed + soak timer only
4. Airduct flap (H2C/H2D/H2D Pro/H2S/X2D/P2S) auto-switches to
match the chamber target — heating mode for engineering
filaments, cooling mode for PLA. Bambu firmware does NOT
auto-switch the flap with M141, so without this an ABS print
on a previously-cooling flap fights the open exhaust, and a
PLA print on a previously-hot flap recirculates ABS heat.
Idempotent: only fires set_airduct_mode when current ≠ desired.
Settings → Workflow → Queue & Dispatch → Preheat & Heat Soak card:
master enable toggle (default off — disabled installs see no change),
per-filament chamber-target editor (replaces a single global int that
shipped in the first cut and couldn't serve PA + PLA in the same
config), preheat_max_wait_seconds, preheat_soak_seconds. The Print
Options panel in PrintModal gets a Preheat sub-section with the
tri-state Inherit/On/Off control and an optional chamber-target
override input.
DB migration: PrintQueueItem gains preheat_override VARCHAR(10)
DEFAULT 'inherit' and preheat_chamber_target_override INTEGER NULL.
Idempotent via _safe_execute. Existing rows behave exactly as before
the migration.
Best-effort throughout: printer drops, refused M141 or set_airduct,
missing bed temp, lost MQTT state mid-wait all log and return cleanly.
Normal upload + start path runs after this returns regardless.
PR A/B turned the slice modal's preset bundle into a one-click dispatch
with a pinned target printer. PR C closes the original issue: operators
type in a number of copies, Bambuddy slices once and distributes prints
across a fleet per the pipeline's chosen fanout strategy. A new dashboard
surfaces every run with filters, expandable per-copy status, cancel,
and retry-failed-copies. WS pushes keep everything live.
Backend
- copies field on POST /run, capped by new pipeline_max_copies setting
(default 50, hard cap 1000). PipelineRun.parent_run_id chains retries.
- SlicerPipelineUpdate accepts target_kind (specific_printer /
printer_class), target_model_class, fanout_strategy.
- Eligibility matcher branches: class-targeting enumerates matching
Printer rows, runs per-printer checks via a status_lookup closure,
returns printer_reports[]. New issue kinds: no_class_matches,
class_not_set.
- _pick_assignments distributes copies per strategy:
- max_parallel: target_model set, printer_id None — scheduler picks
- round_robin: copy i → eligible[i % N], fixed printer_id
- fill_one_first: all copies pinned to eligible[0]
All three reuse the slice-once path through slice_dispatch.enqueue.
- New routes:
- GET /pipeline-runs (paginated, filterable by pipeline + status)
- POST /pipeline-runs/{id}/retry-failed (creates child run with
copies = failed+cancelled count, parent_run_id set)
- Cancel cascades to all N queue entries (only pending/queued)
- _roll_up_run_status computes run-level status from per-job statuses;
introduces partial_failure for "some completed, some failed".
- ws_manager.broadcast_to_user emits pipeline_run_updated on every
state transition with the full materialised response.
Frontend
- Pipeline editor: target_kind radio + class picker (filtered to
installed models) + fanout-strategy radio. Read-only row shows
"X1C · Round robin" for class pipelines.
- RunWithPipelineModal: copies number input bounded by
settings.pipeline_max_copies. Accepts class-targeted pipelines.
- Settings → Workflow → Queue & Dispatch: new "Slicer Pipeline limits"
card with the max-copies input.
- New /pipelines/runs dashboard page (sidebar entry, gated on
pipelines:read). Two-filter dropdown, 25-per-page pagination, per-row
expandable to job list, Cancel + Retry-failed buttons.
- useWebSocket case for pipeline_run_updated invalidates both
pipeline-runs-all and pipeline-runs/{id} query keys.
Adds a global local_login_enabled setting plus a per-provider
is_autologin flag on OIDCProvider so operators who run their own SSO
enabled, or if the calling admin has no UserOIDCLink — either would
lock everyone out. App-layer invariant: at most one provider can carry
is_autologin; setting it on one clears it on every other.
/auth/advanced-auth/status surfaces both new fields so the LoginPage
decides UI in one query. The env-var bypass flips the reported
local_login_enabled back to true so the SPA matches what the route
will accept.
Continue Auto-Drying while a print is running on capable hardware.
New Settings > Print Queue > "Continue drying while printing" toggle
(default OFF). Extends _check_auto_drying in print_scheduler.py to
evaluate running printers when supports_drying_while_printing(model,
firmware) returns true. Strict allowlist verified per Bambu wiki
release notes for "Print While Drying" / "printing while filament is
drying": H2D 01.03.00.00+, H2C/H2S/P2S/H2D Pro 01.02.00.00+, X2D/A2L
01.01.00.00+, X1C 01.11.02.00+. P1*, A1, A1 Mini, X1 (non-C), X1E
intentionally excluded. Mid-print drying temperature is capped at
max(40, preset_temp - 5) to protect spools from heat damage inside the
hot enclosure during a print, matching Bambu's own "lower drying
temperature during printing" guidance.
Rotate-spool toggle in the drying popover is now disabled when any tray
in the targeted AMS has filament threaded into the feed tube
(tray.state === 11). The whole AMS rotates as one mechanism, so a
single loaded slot locks the entire unit. Previously the toggle was
always clickable and the firmware rejected with dry_sf_reason=[3]
(ConsumableAtAmsOutlet) after the click. The first cut keyed on the
printer-level tray_now but missed the H2D's typical post-print state
where tray_now resets to 255 while filament stays in the tube — the
per-tray state field reports it correctly. Submission also clamps
rotateTray off so a stale-true state from a previous AMS can't leak
through.
Backend: supports_drying_while_printing in printer_manager.py covers
display names and internal SSDP/MQTT codes (O1D, O1E/O2D, O1C/O1C2,
O1S, N6, BL-P001, N7, N9). New print_drying_enabled boolean in
settings schema. Frontend: toggle on SettingsPage, gate + clamp on
PrintersPage drying popover using existing amsData cache. i18n: 3 new
keys x 11 locales, no English fallback. Tests: 7 cases on the gate
matrix (TestSupportsDryingWhilePrinting), 4 cases on the scheduler
mid-print path (TestMidPrintDrying), 9 cases on the rotate gate state
transitions. Full backend pytest -n 30 green (4251/4251), ruff clean,
frontend npm run build clean, i18n parity 5355 leaves per locale.
- Introduced cost center permissions in permissions.py.
- Added finance-related fields and models in archive.py, finance.py, library.py, print_queue.py, and settings.py.
- Implemented database migrations for cost centers and wallet transactions in database.py.
New setting "Auto-add unknown RFID spools" under Settings -> Filament -> Filament Tracking,
default ON for back-compat. When turned off, the backend stops auto-creating an inventory
record for an unknown RFID tag and instead broadcasts an unknown_tag WS event that pops
a global confirmation modal in the Bambuddy UI showing the printer / AMS-X label / slot /
material / colour. Add or Cancel; no nag on every MQTT push.
Backend
- Module-level _unknown_tag_last_broadcast dict dedupes per (printer, slot, tag). Set is
committed AFTER ws_manager.broadcast() returns so a crashed broadcast doesn't poison
the dedup and permanently silence the slot.
- Empty-slot MQTT push clears that slot's entry, so remove+reinsert reliably re-prompts.
- Successful matches via get_spool_by_tag / find_matching_untagged_spool / create_spool
also clear the entry so a future tag swap re-prompts.
- Tray data (tray_type, tray_color, tray_sub_brands, tray_count) shipped in the WS payload
directly so the modal renders the real material / colour instead of relying on the
React Query cache that lags the WS event by several seconds.
- Two new endpoints back the modal's confirm action:
POST /api/v1/inventory/spools/from-slot (INVENTORY_UPDATE)
POST /api/v1/spoolman/spools/from-slot (FILAMENTS_UPDATE)
Both look up the slot's tray data server-side and create + auto-assign atomically.
- Spoolman /from-slot now raises HTTP 500 when the slot-assignment INSERT fails instead
of returning success while the DB rolled back the binding.
- sync_ams_tray gained an optional auto_add_unknown_rfid kwarg (default True so existing
callers are unaffected); auto-sync and both manual sync routes thread the setting.
Frontend
- useUnknownTagPrompt hook listens for the unknown-tag CustomEvent, reads the tray fields
out of the event detail, and feeds a single-modal queue. No long-lived dismissed set;
the backend dedup handles spam suppression.
- UnknownSpoolModal wraps the existing ConfirmModal with a material + colour-swatch
preview block.
- Mounted in Layout.tsx alongside useSponsorPrompt so SpoolBuddy kiosk / login / setup
routes are excluded.
- getAmsLabel moved to utils/amsHelpers.ts; ConfigureAmsSlotModal.tsx and PrintersPage.tsx
both import the shared version (canonical AMS-A / HT-A / External labels).
- AppSettings TS interface gained spoolman_enabled, auto_add_unknown_rfid, spoolman_url
so the runtime cast in the hook is no longer needed.
- SpoolmanSettings.tsx gets a new toggle row in the Filament Tracking card, visible in
both built-in and Spoolman branches; auto-save + toast already wired.
Reporter @thenewguy runs an engineering farm with one AMS per material
(PLA, ASA, Nylon, PVB, HIPS) — Bambuddy's single global ams_humidity_fair
threshold (default 60%) was driving both the queue / ambient auto-drying
trigger AND the hourly humidity alarm uniformly, which is wrong for
multi-material setups where Nylon wants <10% and PLA is fine at 60%.
Drying RUN parameters were already per-filament via drying_presets;
this commit adds the missing per-filament TRIGGER.
New setting ams_humidity_thresholds — JSON map of filament-type to
threshold percent with a "default" key for unknown / unmapped types.
Empty / unset → both consumers fall back to ams_humidity_fair so the
upgrade is silent.
Resolver lives in PrintScheduler.resolve_humidity_threshold(trays,
thresholds, fallback) — picks the lowest (most-restrictive) threshold
across all loaded tray types, matching the conservative-params strategy
_get_conservative_drying_params already uses for temp / hours. Empty
tray slots contribute no constraint; all-empty AMS falls through to the
"default" key. Filament names normalized to uppercase base (so
"PLA Basic" / "pla basic" both map to PLA).
Two consumer sites rewired through the same resolver so the scheduler
and the alarm path can never disagree about whether an AMS is "too
humid":
- print_scheduler.py::_check_auto_drying — per-AMS humidity comparison
for start / stop / skip decisions.
- main.py AMS sensor / alarm worker — hourly humidity alarm notifier.
UI: new table in Settings → Workflow → Auto-Drying, below the existing
Drying Presets table. Default row + 8 default filament types
(PLA / PETG / TPU / ABS / ASA / PA / PC / PVA) pre-filled from the
current ams_humidity_fair value so the editor starts sensibly.
Input pattern: draft-on-edit / commit-on-blur (transient humidityDrafts
state per row). onChange only updates the draft; onBlur (and Enter)
parses + clamps to [5, 95] + commits. Empty value on blur clears the
override and falls back to default. Caught mid-PR via a typing test:
the naive per-keystroke clamp snapped "3" → 5 before the user could
type the second digit of "30".
Setting is in the public _UI_PREFERENCE_FIELDS allowlist (same rationale
as drying_presets and ams_humidity_fair — non-sensitive integer map,
no SETTINGS_READ permission required for badge-color rendering).
New PrinterSensorHistory table + 60s recorder + GET/DELETE /printer-sensor-history
route gated behind a new PRINTER_SENSOR_HISTORY_READ scope (separate from AMS). UI
adds a 10x10 LineChart icon on each heater tile - click body opens the existing
target-temp popover unchanged, click icon opens a HeaterHistoryModal mirroring the
AMSHistoryModal shape (kind toggle + 6h/24h/48h/7d range + current/avg/min/max +
recharts line for value + dashed target). Read-only X1C/P2S chamber tile finally
gets an interaction. Retention configurable via printer_sensor_history_retention_days
(default 30, sibling of ams_history_retention_days). 8 new i18n keys translated in
all 11 locales, parity green. 4 backend + 6 frontend tests added; full pytest -n 30
6226/6226, vitest 2176/2176, ruff/eslint/build all clean.
The 24h session cap from the M-2 audit finding was hard-coded, so the
"Remember Me" checkbox could only control storage location, never
duration. Add session_max_hours setting (default 24, max 720) honoured
at all four token-issuance sites: plain login, 2FA TOTP/email, 2FA
backup, OIDC.
- backend/app/core/auth.py: SESSION_MAX_HOURS_HARD_CEILING + resolver
that clamps to [1h, 720h] and falls back to 24h on missing/blank/
unparseable. DB errors propagate — the login transaction must abort
on a broken DB rather than silently extend or shrink the lifetime.
- backend/app/api/routes/auth.py, mfa.py: all four sites read the
resolved value instead of ACCESS_TOKEN_EXPIRE_MINUTES directly.
- backend/app/schemas/settings.py, routes/settings.py: schema field
with ge=1 le=720 + int coercion in _build_settings_response.
- frontend/src/pages/SettingsPage.tsx: half-width card at top of
Settings -> Users left column with 24h/7d/30d presets, custom input,
and a yellow warning when value > 24h.
- frontend/src/i18n/locales/*.ts: 8 new keys per locale, real
translations in all 11 (en/de/es/fr/it/ja/ko/pt-BR/tr/zh-CN/zh-TW).
- backend/tests/integration/test_session_policy.py: 15 tests across
resolver clamping, login JWT exp end-to-end, settings API round-trip.
Already-issued tokens keep their original expiry; the new setting only
affects future logins.
Reporter wanted to slice via the Bambu Studio sidecar but open files
locally in OrcaSlicer. preferred_slicer drove both the in-app
SliceModal sidecar selection AND the desktop "Open in Slicer" URI
handoff, so picking one forced the other.
New open_in_slicer setting (str | None) drives only the desktop URI;
null inherits from preferred_slicer so existing installs behave
identically. Storage in the existing app_settings key/value table;
GET normalises the "None" string back to null mirroring the
default_printer_id convention.
Frontend: Settings -> Slicer card adds a second dropdown ("Open in
Slicer" with "Same as API slicer" / Bambu Studio / OrcaSlicer);
ArchivesPage, MakerworldPage, ModelViewerModal switch desktop-URI
call sites to open_in_slicer ?? preferred_slicer. MakerworldPage's
"Slice in {{slicer}}" label additionally branches on useSlicerApi
so the label matches what the button actually dispatches.
Bambuddy's project_file MQTT payload hardcoded "nozzle_offset_cali": 2 (skip),
giving users on H2D / H2D Pro / H2C / X2D no way to control the same toggle
BambuStudio exposes. Critical for diamond-nozzle setups that must keep the
calibration off.
start_print() now takes a nozzle_offset_cali kwarg; the value is encoded as
1 (run) or 2 (skip) and gated on is_dual_nozzle so single-nozzle machines
always send 2 even if a stale flag arrives. The kwarg threads through
printer_manager, both background_dispatch sites, and print_scheduler so
every dispatch path respects the per-item setting.
print_queue gains a nozzle_offset_cali column (DEFAULT TRUE, is_sqlite()
branch for Postgres BOOLEAN). Settings default key default_nozzle_offset_cali
defaults to TRUE to match BambuStudio. Schemas updated across print_queue,
library FilePrintRequest, archive ReprintRequest, settings.
PrintModal renders the new toggle only when the selected printer is dual-
nozzle (printer-mode: nozzle_count===2; model-mode: DUAL_NOZZLE_MODELS).
SettingsPage default-print-options row + QueuePage bulk-edit tri-state both
hide unless any registered printer is dual-nozzle. Labels reuse the existing
settings.default* keys so the only new i18n strings are
settings.defaultNozzleOffsetCali / Desc and queue.bulkEdit.nozzleOffsetCali
- real translations in all 11 locales.
Bambu's end-gcode lowers the bed at gcode_state=FINISH. Bambuddy's
live-camera grab captured the bed already dropped, ruining the photo
framing. Source the photo from a brief Bambu timelapse instead —
firmware stops timelapse recording AFTER toolhead parks but BEFORE
bed-drop runs, so the last frame frames the finished print correctly.
When capture_finish_photo is on AND the user did not opt in to
timelapse for this print, force timelapse=True at dispatch + mark the
new PrintArchive.bambuddy_forced_timelapse column. After extraction
(success or failure), cleanup deletes the locally-attached file,
clears archive.timelapse_path, and walks the four scanner directories
(/timelapse, /timelapse/video, /record, /recording) trying FTP DELE
against the original filename. User-opted-in timelapses pass through
unchanged.
Resolver lives at services/background_dispatch.py::resolve_effective_timelapse
(module-level so the print queue can reuse it). Both dispatch paths
wired: background_dispatch.py (Print Now / Reprint) AND
print_scheduler.py:_start_print (the queue). Field testing caught the
scheduler gap on the first round — AST regression test now asserts
start_print(timelapse=...) references effective_timelapse, not the raw
item.timelapse, so a future refactor can't silently drop it.
Extractor: ffmpeg -i input.mp4 -update 1 -q:v 2 out.jpg. Decoded
frames overwrite the same output file, so the file left on disk is the
literal last frame regardless of duration. Bambu records one frame per
layer-change, so a 16-layer cube produces a 0.6 s timelapse — the
original -sseof -1.0 approach seeked before the start of the file and
returned frame 0 (empty bed). Decoding every frame is fine; Bambu
timelapses are short by construction even on hours-long prints.
Migration adds bambuddy_forced_timelapse branched on is_sqlite()
(DEFAULT 0 / DEFAULT FALSE — PG rejects DEFAULT 0 for BOOLEAN).
Verified live on postgres:16-alpine.
Photo-task wait_for budget extends 45s -> 75s when timelapse_was_active
so the notification carries the bed-up photo instead of falling back
to the live-cam grab on slow links.
Scope limit, documented in the camera wiki: prints started directly
on the printer touchscreen / Bambu Handy / Bambu Studio Send bypass
both dispatch paths, so the override doesn't fire there. Future
option: mid-print M981 S1 P20000 MQTT toggle in on_print_start.
Setting description rewritten in all 11 locales to drop the "only
works when timelapse enabled" caveat (Bambuddy now forces it) and
explain the kept-or-deleted behaviour.
#1429 (reported by @TrickShotMLG02, confirmed by @Mape6 on a flat single-LAN
that rules out subnet / mDNS-reflector theories): with the physical printer
off the slicer's "Send" landed in Bambuddy's archive; once the printer
powered on every subsequent "Send" went straight to the printer's SD card
and bypassed Bambuddy. Bundle analysis: mape6-before showed clean FTP
receive + archive lines, mape6-after had zero FTP attempts to Bambuddy
once the printer was online.
Cause: mqtt_bridge.py::_resolve_client encoded _target_ip_uint32_le /
_vp_ip_uint32_le ONLY on client-identity change and early-returned on
every refresh tick when the same client object was still bound. If
target_client.ip_address was empty at first bind (DB row stale, or client
constructed before SSDP refresh filled it in), the encoding stayed None,
the net.info[*].ip rewrite block was skipped, the cache filled with the
real printer IP, sticky-key preservation kept the poisoned net value
alive across every subsequent incremental push, and the slicer followed
the leaked IP. Only Bambuddy-restart-with-printer-off cleared it — the
workaround both reporters independently arrived at. Same shape on
multi-NIC printers (X1C, H2D Pro): the rewrite only matched entries
whose ip equalled _target_ip_uint32_le, so a secondary interface IP
Bambuddy never saw would leak through unchanged.
Bridge fix:
- _resolve_client calls a new _refresh_ip_encoding() on every refresh
tick, even when client identity is unchanged; self-heals once
ip_address becomes valid.
- _refresh_ip_encoding() sweeps the existing _latest_print_state when
encoding becomes valid for the first time. Without the sweep,
sticky-key preservation keeps the pre-arm poisoned cache alive
forever — incremental pushes that don't include net carry the bad
value forward.
- _rewrite_net_info_ips() rewrites EVERY non-zero net.info[].ip entry
that doesn't already equal the VP IP, not just entries matching
_target_ip_uint32_le. Multi-NIC printers stop leaking secondary
interfaces. Zero-IP placeholders are left alone so "active interface"
detection still works.
- INFO logging on encoding arm/update and on cache sweep so future
bundles directly answer "did the rewrite fire?".
Mode wire-value rename (#1429 follow-up, separate confusion source):
- Both reporters' support bundles showed mode: immediate while the UI
said "Archive"; @TrickShotMLG02 quoted: "I have no idea why it says
immediate in the support-info.json file. In the webui the printer is
set to archive". UI button "Archive" had always saved immediate, and
"Queue" had always saved print_queue. Canonical wire values are now
archive / review / queue / proxy, matching the button labels 1:1.
- New normalize_vp_mode() + VP_MODE_* constants in
models/virtual_printer.py; manager.py normalises on construction so
a legacy row read pre-migration still dispatches correctly.
- core/database.py::run_migrations rewrites existing virtual_printers
and settings rows; idempotent (re-runs are no-ops); identical SQL
under SQLite and Postgres.
- API routes accept both legacy and canonical on input, normalise
before storage. GET /settings/virtual-printer normalises on read so
the frontend's mode-button highlight works for stale legacy values.
- Three frontend VP components (VirtualPrinterSettings,
VirtualPrinterCard, VirtualPrinterAddDialog) switched click handlers
and type aliases to canonical; each got its own normalizeMode()
helper so a stale-cached settings payload still highlights the right
button. Two pre-existing `printer.mode === 'queue' ? 'review'`
legacy mappings in VirtualPrinterCard were the source of a test
failure caught mid-implementation where the new canonical 'queue'
was being mis-aliased back to 'review' and hiding the auto-dispatch
+ force-color-match toggles.
mode handler is NOT the dispatch bug: manager.py::_archive_file (the
handler for archive mode) doesn't dispatch to the physical printer.
The "files end up on the printer's SD card" symptom was the IP-leak
from the bridge cache. The mode rename is purely clarity / support-
bundle accuracy.
Slicer-uploaded archives picked up their display name from the 3MF's
embedded print_name (the creator-baked title); users who renamed a job
in BambuStudio's "Send to printer" dialog never saw that name surface
because the FTP filename was only used as a fallback when metadata was
empty.
Settings -> Virtual Printer now exposes an Archive name source toggle
(Metadata / Filename, default Metadata) that flips precedence in
ArchiveService.archive_print via a new prefer_filename_for_name param.
All four VP-sourced archive paths read the new
virtual_printer_archive_name_source setting and forward the flag:
_archive_file, _add_to_print_queue, POST /pending-uploads/archive-all,
POST /pending-uploads/{id}/archive.
Adds an optional slicer-api/ Compose stack and wires Bambuddy's File
Manager, Archives, and MakerWorld pages to a new server-side Slice flow.
Slicing runs as an in-memory background job (POST returns 202 + job_id,
polled via GET /api/v1/slice-jobs/{id}) so a multi-minute slice no
longer pins the modal; result lands as a new .gcode.3mf in the same
folder (or new archive for archive sources) with the embedded
thumbnail extracted.
Backend
- New services: slice_dispatch (in-memory dispatcher, 30min retention
sweep) and slicer_api (HTTP bridge with 4xx/5xx/connection error
split that drives the 3MF embedded-settings fallback retry path).
- New schemas: SliceRequest, SliceResponse, SliceArchiveResponse,
SliceJobEnqueueResponse.
- New routes: POST /library/files/{id}/slice,
POST /archives/{id}/slice, GET /api/v1/slice-jobs/{id} (gated on
LIBRARY_READ since job IDs are sequential and the body leaks source
filenames and result IDs).
- AppSettings + env defaults: use_slicer_api, orcaslicer_api_url,
bambu_studio_api_url. DB-stored values override env defaults.
Frontend
- New SliceModal handles preset gating; enqueues then closes
immediately.
- New SliceJobTrackerProvider polls active jobs at app level, surfaces
a single toast per job (queued -> running -> completed / failed)
and invalidates library/archives queries on terminal status.
- Settings -> Workflow -> Slicer card: preferred slicer dropdown,
Use Slicer API toggle, contextual sidecar URL field.
- File Manager / Archives / MakerWorld get a Slice button gated on
the Use Slicer API setting.
- gcode-viewer adapter learns ?library_file=<id> so sliced library
files preview inline.
i18n
- New slice.* and settings.{useSlicerApi,slicerCard,orcaslicerApiUrl,
bambuStudioApiUrl,slicerApiUrlDescription,useSlicerApiDescription}
+ fileManager.noPermissionSlice keys across all 8 locales (en, de,
fr, it, ja, pt-BR, zh-CN, zh-TW). English fully translated, German
fully translated, the other six seeded with English fallbacks
pending native translation.
Tests
- 10 backend integration tests in test_library_slice_api.py covering
validation (404/400), happy-path enqueue, sidecar-down, 3MF
embedded-settings fallback, STL no-fallback, and preset-error ->
failed job paths.
- New unit tests in test_slicer_api.py for the HTTP bridge.
- 5 new SliceModal frontend tests covering preset gating, library +
archive enqueue paths, error surface, and preset-load failure.
- Existing SettingsPage tests adjusted: slicer dropdown asserts now
switch to the Workflow tab first; added a beforeEach URL reset so
one test's tab click doesn't bleed into sibling tests.
Sidecar
- New slicer-api/ folder is self-contained and optional. Two services
(orca-slicer-api on 3003, bambu-studio-api on 3001 behind --profile
bambu) build via Docker git-build-context from
maziggy/orca-slicer-api@bambuddy/profile-resolver. The fork patches
the OrcaSlicer CLI's profile compatibility quirks (inherits-chain
resolver, from:User -> system rewrite, '# ' clone-prefix strip,
sentinel-value strip) empirically required to slice real GUI
exports without segfaulting the CLI.
Docs
- CHANGELOG entry under [0.2.4b1] - Unreleased Added.
- README File Manager bullet for the new server-side Slice button.
- bambuddy-website features.html: new card under "Configurable Slicer".
- bambuddy-wiki: new page features/slicer-api.md + nav entry +
features index card.
Notes
- Opt-in: with Use Slicer API off, the existing "open in desktop
slicer via URI" flow is the default and unchanged.
- 3MF inputs that segfault the CLI on --load-settings transparently
retry with embedded settings; the resulting job carries
used_embedded_settings: true.
- Sliced files always export as .gcode.3mf so File Manager picks up
the embedded thumbnail; file_type is set to "gcode" (blue badge).
New users repeatedly reported queued prints "not starting" because the
confirmation prompt was waiting on an ack they didn't know existed.
Flip the default in the settings schema and in the frontend fallbacks
so a missing/unset value reads as disabled. Existing installs keep
their saved preference.
Adds a Failure Detection tab under Settings that wires Bambuddy to a
self-hosted Obico ml_api container — no cloud, no account, no WebSocket.
While a print is running, the detection service periodically hands the
printer's camera snapshot URL to the ML API and smooths scores over
time (30-frame warmup + EWM, alpha=2/13, short/long rolling means) so
one noisy frame can't trigger an action. When the smoothed score
crosses HIGH, the configured action fires exactly once per print:
notify, pause, or pause-and-cut-power (via linked smart plugs).
- Backend: new obico_detection + obico_smoothing + obico_actions
services, /obico/status and /obico/test-connection routes
(SETTINGS_READ / SETTINGS_UPDATE), six obico_* AppSettings fields
with validators for sensitivity/action/enabled_printers.
- Frontend: FailureDetectionSettings component (enable, ML URL + test,
sensitivity, action, poll interval, per-printer monitor list, live
status + detection history), new sidebar tab with service-active
bullet, toast on save.
- Tests: 17 detection unit tests + 15 smoothing unit tests + 4
frontend component tests.
- Docs: README bullet, CHANGELOG entry, wiki page under Analytics,
website features.html entry.
Two related LDAP authentication changes.
Fix: POSIX primary group membership was ignored. authenticate_ldap_user
only searched for posixGroup entries via memberUid (supplementary
groups). A user's primary group — referenced by the gidNumber attribute
on the user object matching gidNumber on a posixGroup — was never
resolved, so users whose role came from their primary group landed
without the expected permissions. The authenticator now runs a second
search for posixGroup entries whose gidNumber matches the user's
primary gidNumber, then dedupes DNs case-insensitively before passing
the list to resolve_group_mapping (LDAP DNs are case-insensitive by
spec).
New feature: ldap_default_group setting. Settings → Authentication →
LDAP → Advanced has a new "Default group" selector. When an LDAP user
authenticates but is not listed in any mapped LDAP group, they are
assigned to this fallback group instead of being left with no groups
(and therefore no permissions). A warning is logged each time the
fallback is applied so admins can spot missing group assignments.
Empty setting preserves the old behavior.
Tests: added 4 mocked authenticate_ldap_user tests covering primary
gidNumber lookup, dedupe of overlapping memberUid+primary gid matches,
case-insensitive DN dedupe, and the guard when a user entry has no
gidNumber attribute. Also extended the existing parse_ldap_config tests
to cover the new default_group field.
Backend: ldap_service.py (primary group + dedupe + default_group
field), schemas/settings.py (schema field), api/routes/auth.py
(fallback wiring in _provision_ldap_user / _sync_ldap_user).
Frontend: LDAPSettings.tsx default-group dropdown in the Advanced
collapsible, api/client.ts type field, new i18n keys in all 7 locales
(defaultGroup, defaultGroupNone, defaultGroupHint).
Users can authenticate against an LDAP/AD server with configurable
server URL, bind DN, search base, and user filter. Supports StartTLS
and LDAPS — plaintext is not allowed. Both Active Directory (memberOf)
and POSIX groups (memberUid) are mapped to BamBuddy groups on each
login. Auto-provisioning creates local accounts on first LDAP login.
Local admin accounts remain as fallback when LDAP is unreachable.
Password management is disabled for LDAP users.
Per-model start/end G-code snippets configurable in Settings (Workflow
tab). Queue items get "Inject G-code" toggle — scheduler injects
snippets into a temp 3MF copy before FTP upload. Supports Farmloop,
SwapMod, AutoClear, Printflow 3D and similar bed-clearing systems.
Original files are never modified.
New SJF toggle badge on the queue page. When enabled, the scheduler
picks shorter print jobs before longer ones instead of FIFO. A
starvation guard flags jobs that get skipped once, moving them to
the front on the next cycle so long jobs can't be postponed indefinitely.
- Add print_time_seconds and been_jumped columns to PrintQueueItem
- Cache print duration from 3MF metadata at queue item creation
- SJF query: printer_id, target_model, been_jumped DESC, print_time_seconds ASC, position
- Mark jumped items in-memory after each print start
- Toggle badge on queue page header with live state indicator
- Frontend auto-sorts to match scheduler order when SJF enabled
- Settings schema, boolean parsing, and migration (SQLite + PostgreSQL)
- i18n badge keys for all 7 locales
- 10 integration tests for SJF ordering and starvation logic
- Wiki, website, README, and changelog updated
Chris Bennight