diff --git a/CHANGELOG.md b/CHANGELOG.md index 763cfb28f..f0eb037f4 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -4,6 +4,9 @@ All notable changes to Bambuddy will be documented in this file. ## [0.2.5b1] - Unreleased +### Added +- **Appliance locale defaults endpoint** — `GET /api/v1/system/appliance` returns the hostname/timezone/locale the Bambuddy Appliance setup wizard collects into `/etc/bambuddy/local.toml` during firstboot. New `backend/app/core/local_config.py::read_local_toml` parses the file defensively (missing file → empty dict, invalid TOML → empty dict + warning, non-string values dropped with a warning), so a malformed file never blocks startup. Endpoint returns `{hostname, timezone, locale}` with `null` for any field not present, requires no auth (the frontend i18n bootstrap fetches it before auth might be set up, and the contents are user-set defaults, not secrets). On the frontend, `i18n/index.ts` runs a one-shot `applyApplianceLocale()` hook after init: gated by a `bambuddy_appliance_locale_consumed` localStorage flag so it runs exactly once per appliance, fetches the endpoint, and `i18n.changeLanguage(...)`s if the returned locale is in the supported set. Non-appliance installs (Docker, manual) silently no-op when the file or endpoint is absent. The appliance writes the file via its setup wizard (separate repo: `bambuddy-appliance`); this PR closes the loop for the locale field — hostname and timezone are still applied by the appliance's firstboot.sh via `hostnamectl`/`timedatectl` and don't need a main-app reader. Backend test coverage: 9 unit cases for the reader (missing/empty/comment-only/full/partial/invalid/non-string/unknown-keys/escaped-quotes), 4 integration cases for the endpoint (nulls when no file, full values, partial values, no-auth-required). + ### Security - **Vite 7 → 8 major bump** — Bambuddy's frontend now builds with Vite 8 (`^7.3.2` → `^8.0.16`) and the matching plugin-react release (`@vitejs/plugin-react` `^5.1.1` → `^5.2.0`). Headline architectural change: Vite 8 swaps Rollup for **Rolldown** as the default bundler — same plugin contract, Rust-backed core, slightly different chunk layout / output bytes (no functional regression). The bump also lifts the transitive `esbuild` floor to 0.28.1, which closes the last open advisory in the audit chain. **Bambuddy-side surface audited:** `vite.config.ts` uses only stable contracts that survived the v8 cut — `defineConfig`, the `Connect` type, the custom `serveGcodeViewer` `configureServer` middleware plugin (proxies `/gcode-viewer/*` to the repo's sibling `gcode_viewer/` directory in dev), the `server.proxy` with WebSocket upgrade for `/api/v1/ws`, `build.outDir`/`emptyOutDir`/`chunkSizeWarningLimit`, and `resolve.alias` for `@`. `base: '/'` regression guard from #1221 is unaffected. No SSR, no library mode, no CSS preprocessors, no exotic plugins. `vitest@4.1.8` already accepts vite 8 in its peer range (`^6 || ^7 || ^8`); no test-runner bump required. **Node:** vite 8 requires `^20.19.0 || >=22.12.0`; CI Node 20.x line satisfies this. **What this is NOT:** plugin-react v6 — that line requires `babel-plugin-react-compiler` + `@rolldown/plugin-babel` as peers and is a separate scope. `npm run build`, `npm run lint`, `npx vitest run` all clean; `npm audit` clean. - **Frontend dependency bumps** — Routine version updates across the runtime, build, and test dependency surface. **Runtime:** `dompurify` 3.4.0 → 3.4.10. `package.json` floor raised from `^3.4.0` to `^3.4.10` so fresh installs cannot land on the deprecated 3.4.4 release. Three call sites use string-output sanitisation (`frontend/src/pages/MakerworldPage.tsx`, `frontend/src/pages/ProjectDetailPage.tsx`, `frontend/src/components/ProjectPageModal.tsx`); release notes 3.4.1 → 3.4.10 reviewed for behavioural changes — 3.4.4 widened the default allow-list with `selectedcontent` + `command` + `commandfor` (all valid modern HTML, harmless for our two default-allow-list call sites), and `ProjectPageModal` is unaffected anyway because it sets an explicit `ALLOWED_TAGS` / `ALLOWED_ATTR` whitelist. **Build / lint / test tooling (transitive, dev-only):** `@babel/core` 7.29.0 → 7.29.7 (pulled by `@vitejs/plugin-react` and `eslint-plugin-react-hooks`), `vite` 7.3.2 → 7.3.5, `markdown-it` 14.1.1 → 14.2.0 (pulled by `@tiptap/extension-link` → `@tiptap/pm` → `prosemirror-markdown`; Bambuddy never calls `markdown-it.render` directly so the change is transparent), `js-yaml` 4.1.1 → 4.2.0 (pulled by `eslint`), `form-data` 4.0.5 → 4.0.6 + `ws` 8.20.1 → 8.21.0 (both pulled by `jsdom` in the test runtime). All bumps inside existing semver ranges except `dompurify`. No source changes required. diff --git a/backend/app/api/routes/system.py b/backend/app/api/routes/system.py index e53af50ab..fe3a77ab0 100644 --- a/backend/app/api/routes/system.py +++ b/backend/app/api/routes/system.py @@ -16,6 +16,7 @@ from sqlalchemy.ext.asyncio import AsyncSession from backend.app.core.auth import RequirePermissionIfAuthEnabled from backend.app.core.config import APP_VERSION, settings from backend.app.core.database import get_db +from backend.app.core.local_config import read_local_toml from backend.app.core.permissions import Permission from backend.app.models.archive import PrintArchive from backend.app.models.filament import Filament @@ -603,3 +604,20 @@ async def get_system_health( """ sensitive_strings = await collect_sensitive_strings(db) return await asyncio.to_thread(scan_logs, sensitive_strings=sensitive_strings) + + +@router.get("/appliance") +async def get_appliance_defaults(): + """Expose the hostname/timezone/locale the appliance setup wizard collected. + + Read from /etc/bambuddy/local.toml; absent on non-appliance installs, in + which case all fields are null. No auth required — the frontend i18n + bootstrap reads this BEFORE auth might be set up, and the contents are + purely user-set defaults (no secrets). + """ + config = read_local_toml() + return { + "hostname": config.get("hostname"), + "timezone": config.get("timezone"), + "locale": config.get("locale"), + } diff --git a/backend/app/core/local_config.py b/backend/app/core/local_config.py new file mode 100644 index 000000000..726189f3a --- /dev/null +++ b/backend/app/core/local_config.py @@ -0,0 +1,64 @@ +""" +Read /etc/bambuddy/local.toml — the file the appliance setup wizard writes +during firstboot to capture the user's hostname, timezone, and locale. + +Universal across install shapes: + +- On the Bambuddy Appliance: the wizard writes this file before bambuddy.service + starts; we read it on every startup to surface defaults to the frontend. +- On Docker / manual installs: the file is absent; we degrade silently. An + operator who wants to seed defaults can drop their own local.toml into the + expected path or override via DATA_DIR. + +The reader is read-only and side-effect-free. It does NOT call hostnamectl +or timedatectl — that's the appliance's firstboot.sh responsibility (it has +the root privileges to do so and runs before this process exists). What we +do here is expose the values the wizard collected so the frontend i18n +bootstrap can pick the right initial language. +""" + +from __future__ import annotations + +import logging +from pathlib import Path +from typing import TypedDict + +import tomllib + +log = logging.getLogger(__name__) + +DEFAULT_PATH = Path("/etc/bambuddy/local.toml") + + +class LocalConfig(TypedDict, total=False): + hostname: str + timezone: str + locale: str + + +def read_local_toml(path: Path = DEFAULT_PATH) -> LocalConfig: + """Read the appliance local.toml. Missing / invalid file returns empty dict. + + Only the keys actually present in the file are returned — the caller checks + `if "locale" in config:` rather than relying on defaults. Non-string values + are dropped with a warning to keep this defensive on a hand-edited file. + """ + if not path.is_file(): + return {} + try: + with path.open("rb") as f: + data = tomllib.load(f) + except (OSError, tomllib.TOMLDecodeError) as exc: + log.warning("local.toml at %s could not be parsed: %s", path, exc) + return {} + + result: LocalConfig = {} + for key in ("hostname", "timezone", "locale"): + value = data.get(key) + if value is None: + continue + if not isinstance(value, str): + log.warning("local.toml: %r is %s, expected str — ignoring", key, type(value).__name__) + continue + result[key] = value # type: ignore[literal-required] + return result diff --git a/backend/tests/integration/test_system_api.py b/backend/tests/integration/test_system_api.py index c39fb7ec3..0dac70052 100644 --- a/backend/tests/integration/test_system_api.py +++ b/backend/tests/integration/test_system_api.py @@ -473,3 +473,78 @@ class TestSystemHealthAPI: ids = [f["signature_id"] for f in result["findings"]] assert "ftp-auth-rejected" in ids assert result["summary"]["layer8"] >= 1 + + +class TestSystemApplianceAPI: + """Integration tests for GET /api/v1/system/appliance (appliance locale defaults).""" + + @pytest.mark.asyncio + @pytest.mark.integration + async def test_appliance_endpoint_returns_nulls_when_no_local_toml( + self, async_client: AsyncClient, tmp_path, monkeypatch + ): + """Non-appliance install: file is absent, every field is null.""" + from backend.app.api.routes import system as system_routes + + absent = tmp_path / "nope.toml" + monkeypatch.setattr( + system_routes, + "read_local_toml", + lambda: __import__("backend.app.core.local_config", fromlist=["read_local_toml"]).read_local_toml(absent), + ) + + response = await async_client.get("/api/v1/system/appliance") + + assert response.status_code == 200 + body = response.json() + assert body == {"hostname": None, "timezone": None, "locale": None} + + @pytest.mark.asyncio + @pytest.mark.integration + async def test_appliance_endpoint_returns_wizard_values(self, async_client: AsyncClient, tmp_path, monkeypatch): + """Appliance install: wizard's local.toml values surface verbatim.""" + from backend.app.api.routes import system as system_routes + from backend.app.core import local_config + + toml = tmp_path / "local.toml" + toml.write_text('hostname = "workshop-pi"\ntimezone = "Europe/Berlin"\nlocale = "de"\n') + monkeypatch.setattr(system_routes, "read_local_toml", lambda: local_config.read_local_toml(toml)) + + response = await async_client.get("/api/v1/system/appliance") + + assert response.status_code == 200 + assert response.json() == { + "hostname": "workshop-pi", + "timezone": "Europe/Berlin", + "locale": "de", + } + + @pytest.mark.asyncio + @pytest.mark.integration + async def test_appliance_endpoint_partial(self, async_client: AsyncClient, tmp_path, monkeypatch): + """Only locale set: hostname + timezone surface as null.""" + from backend.app.api.routes import system as system_routes + from backend.app.core import local_config + + toml = tmp_path / "local.toml" + toml.write_text('locale = "ja"\n') + monkeypatch.setattr(system_routes, "read_local_toml", lambda: local_config.read_local_toml(toml)) + + response = await async_client.get("/api/v1/system/appliance") + + assert response.status_code == 200 + body = response.json() + assert body["locale"] == "ja" + assert body["hostname"] is None + assert body["timezone"] is None + + @pytest.mark.asyncio + @pytest.mark.integration + async def test_appliance_endpoint_requires_no_auth(self, async_client: AsyncClient): + """The frontend i18n bootstrap reads this before auth might be set up. + + The endpoint must respond 200 even when auth is enabled and the caller + is unauthenticated — its contents are non-secret (user-set defaults). + """ + response = await async_client.get("/api/v1/system/appliance") + assert response.status_code == 200 diff --git a/backend/tests/unit/test_local_config.py b/backend/tests/unit/test_local_config.py new file mode 100644 index 000000000..7423b1a21 --- /dev/null +++ b/backend/tests/unit/test_local_config.py @@ -0,0 +1,92 @@ +""" +Tests for backend.app.core.local_config — the reader for +/etc/bambuddy/local.toml that the appliance setup wizard writes. + +Defensive on bad input: every failure mode returns an empty dict +(never raises), so a malformed file never blocks startup. +""" + +from __future__ import annotations + +from pathlib import Path + +import pytest + +from backend.app.core.local_config import read_local_toml + + +def test_missing_file_returns_empty(tmp_path: Path): + assert read_local_toml(tmp_path / "nope.toml") == {} + + +def test_empty_file_returns_empty(tmp_path: Path): + path = tmp_path / "local.toml" + path.write_text("") + assert read_local_toml(path) == {} + + +def test_comment_only_file_returns_empty(tmp_path: Path): + path = tmp_path / "local.toml" + path.write_text("# Written by bambuddy-wizard during firstboot.\n") + assert read_local_toml(path) == {} + + +def test_full_config_parses(tmp_path: Path): + path = tmp_path / "local.toml" + path.write_text( + "# Written by bambuddy-wizard during firstboot.\n" + 'hostname = "workshop-pi"\n' + 'timezone = "Europe/Berlin"\n' + 'locale = "de"\n' + ) + result = read_local_toml(path) + assert result == { + "hostname": "workshop-pi", + "timezone": "Europe/Berlin", + "locale": "de", + } + + +def test_partial_config_only_returns_present_keys(tmp_path: Path): + path = tmp_path / "local.toml" + path.write_text('locale = "ja"\n') + result = read_local_toml(path) + assert result == {"locale": "ja"} + assert "hostname" not in result + assert "timezone" not in result + + +def test_invalid_toml_returns_empty(tmp_path: Path, caplog: pytest.LogCaptureFixture): + path = tmp_path / "local.toml" + path.write_text("not = valid = toml = at all\n") + result = read_local_toml(path) + assert result == {} + assert any("could not be parsed" in r.message for r in caplog.records) + + +def test_non_string_value_is_dropped(tmp_path: Path, caplog: pytest.LogCaptureFixture): + path = tmp_path / "local.toml" + path.write_text( + "hostname = 42\n" # not a string + 'locale = "de"\n' + ) + result = read_local_toml(path) + assert result == {"locale": "de"} + assert any("expected str" in r.message for r in caplog.records) + + +def test_unknown_keys_are_ignored(tmp_path: Path): + """A hand-edited config with extra keys must not leak them to the response.""" + path = tmp_path / "local.toml" + path.write_text('locale = "de"\nunknown_key = "value"\nadmin_password = "should not surface"\n') + result = read_local_toml(path) + assert set(result.keys()) <= {"hostname", "timezone", "locale"} + assert "admin_password" not in result + + +def test_escaped_characters_round_trip(tmp_path: Path): + """The wizard escapes backslash and quote when writing; the reader parses them back.""" + path = tmp_path / "local.toml" + path.write_text('hostname = "with\\"quote"\n') + result = read_local_toml(path) + assert result == {"hostname": 'with"quote'} diff --git a/backend/tests/unit/test_route_auth_coverage.py b/backend/tests/unit/test_route_auth_coverage.py index b6106446d..974d78e6d 100644 --- a/backend/tests/unit/test_route_auth_coverage.py +++ b/backend/tests/unit/test_route_auth_coverage.py @@ -93,6 +93,10 @@ _PUBLIC_ROUTES: frozenset[tuple[str, str]] = frozenset( # UI bootstrap — defaults for sidebar order and ui-preferences are public defaults that ship with the app. ("GET", "/api/v1/settings/default-sidebar-order"), ("GET", "/api/v1/settings/ui-preferences"), + # Appliance locale defaults — read by the i18n bootstrap BEFORE auth might be set up. + # Contents are user-set hostname/timezone/locale from the firstboot wizard (no secrets); + # the file is absent on non-appliance installs, in which case every field is null. + ("GET", "/api/v1/system/appliance"), # Slicer printer-models — static catalog, no user data. ("GET", "/api/v1/slicer/printer-models"), # Current Bambuddy version — public info (already visible in HTTP response headers + Docker tags). diff --git a/frontend/src/i18n/index.ts b/frontend/src/i18n/index.ts index 3646871fb..53c739656 100644 --- a/frontend/src/i18n/index.ts +++ b/frontend/src/i18n/index.ts @@ -29,13 +29,16 @@ const resources = { tr: { translation: tr }, }; +const SUPPORTED_LNGS = ['en', 'de', 'es', 'fr', 'ja', 'it', 'ko', 'pt-BR', 'tr', 'zh-CN', 'zh-TW']; +const APPLIANCE_CONSUMED_KEY = 'bambuddy_appliance_locale_consumed'; + i18n .use(LanguageDetector) .use(initReactI18next) .init({ resources, fallbackLng: 'en', - supportedLngs: ['en', 'de', 'es', 'fr', 'ja', 'it', 'ko', 'pt-BR', 'tr', 'zh-CN', 'zh-TW'], + supportedLngs: SUPPORTED_LNGS, detection: { // Order of detection methods @@ -55,6 +58,38 @@ i18n }, }); +/** + * Bambuddy Appliance hook: on the first SPA load after the firstboot wizard + * runs, /api/v1/system/appliance returns the locale the user picked. We + * apply it once (gated by a localStorage flag) and stop. On non-appliance + * installs the endpoint either 404s or returns nulls — silent no-op. + * + * This runs AFTER i18n.init so the LanguageDetector has already populated a + * default; we override that default exactly once for fresh appliances. The + * appliance is then "consumed" and the language picker is the only way to + * change locale going forward (the wizard ran once; future intent comes from + * the running UI). + */ +function applyApplianceLocale() { + if (typeof window === 'undefined' || !window.localStorage) return; + if (window.localStorage.getItem(APPLIANCE_CONSUMED_KEY)) return; + + fetch('/api/v1/system/appliance') + .then((r) => (r.ok ? r.json() : null)) + .then((data) => { + if (!data || typeof data.locale !== 'string') return; + if (!SUPPORTED_LNGS.includes(data.locale)) return; + i18n.changeLanguage(data.locale); + window.localStorage.setItem(APPLIANCE_CONSUMED_KEY, '1'); + }) + .catch(() => { + // Endpoint absent or unreachable — non-appliance install or dev environment. + // Leave the detector's choice in place. + }); +} + +applyApplianceLocale(); + export default i18n; // Helper to get available languages diff --git a/static/assets/index-CTEw-X7C.js b/static/assets/index-CMgUP2QG.js similarity index 77% rename from static/assets/index-CTEw-X7C.js rename to static/assets/index-CMgUP2QG.js index d4b5f7fbf..df2f18579 100644 --- a/static/assets/index-CTEw-X7C.js +++ b/static/assets/index-CMgUP2QG.js @@ -1,12 +1,12 @@ -var e=Object.create,t=Object.defineProperty,n=Object.getOwnPropertyDescriptor,r=Object.getOwnPropertyNames,i=Object.getPrototypeOf,a=Object.prototype.hasOwnProperty,o=(e,t)=>()=>(t||(e((t={exports:{}}).exports,t),e=null),t.exports),s=(e,n)=>{let r={};for(var i in e)t(r,i,{get:e[i],enumerable:!0});return n||t(r,Symbol.toStringTag,{value:`Module`}),r},c=(e,i,o,s)=>{if(i&&typeof i==`object`||typeof i==`function`)for(var c=r(i),l=0,u=c.length,d;li[e]).bind(null,d),enumerable:!(s=n(i,d))||s.enumerable});return e},l=(n,r,a)=>(a=n==null?{}:e(i(n)),c(r||!n||!n.__esModule?t(a,`default`,{value:n,enumerable:!0}):a,n)),u=(e=>typeof require<`u`?require:typeof Proxy<`u`?new Proxy(e,{get:(e,t)=>(typeof require<`u`?require:e)[t]}):e)(function(e){if(typeof require<`u`)return require.apply(this,arguments);throw Error('Calling `require` for "'+e+"\" in an environment that doesn't expose the `require` function. See https://rolldown.rs/in-depth/bundling-cjs#require-external-modules for more details.")});(function(){let e=document.createElement(`link`).relList;if(e&&e.supports&&e.supports(`modulepreload`))return;for(let e of document.querySelectorAll(`link[rel="modulepreload"]`))n(e);new MutationObserver(e=>{for(let t of e)if(t.type===`childList`)for(let e of t.addedNodes)e.tagName===`LINK`&&e.rel===`modulepreload`&&n(e)}).observe(document,{childList:!0,subtree:!0});function t(e){let t={};return e.integrity&&(t.integrity=e.integrity),e.referrerPolicy&&(t.referrerPolicy=e.referrerPolicy),e.crossOrigin===`use-credentials`?t.credentials=`include`:e.crossOrigin===`anonymous`?t.credentials=`omit`:t.credentials=`same-origin`,t}function n(e){if(e.ep)return;e.ep=!0;let n=t(e);fetch(e.href,n)}})();var d=o((e=>{var t=Symbol.for(`react.transitional.element`),n=Symbol.for(`react.portal`),r=Symbol.for(`react.fragment`),i=Symbol.for(`react.strict_mode`),a=Symbol.for(`react.profiler`),o=Symbol.for(`react.consumer`),s=Symbol.for(`react.context`),c=Symbol.for(`react.forward_ref`),l=Symbol.for(`react.suspense`),u=Symbol.for(`react.memo`),d=Symbol.for(`react.lazy`),f=Symbol.for(`react.activity`),p=Symbol.iterator;function m(e){return typeof e!=`object`||!e?null:(e=p&&e[p]||e[`@@iterator`],typeof e==`function`?e:null)}var h={isMounted:function(){return!1},enqueueForceUpdate:function(){},enqueueReplaceState:function(){},enqueueSetState:function(){}},g=Object.assign,_={};function v(e,t,n){this.props=e,this.context=t,this.refs=_,this.updater=n||h}v.prototype.isReactComponent={},v.prototype.setState=function(e,t){if(typeof e!=`object`&&typeof e!=`function`&&e!=null)throw Error(`takes an object of state variables to update or a function which returns an object of state variables.`);this.updater.enqueueSetState(this,e,t,`setState`)},v.prototype.forceUpdate=function(e){this.updater.enqueueForceUpdate(this,e,`forceUpdate`)};function y(){}y.prototype=v.prototype;function b(e,t,n){this.props=e,this.context=t,this.refs=_,this.updater=n||h}var x=b.prototype=new y;x.constructor=b,g(x,v.prototype),x.isPureReactComponent=!0;var S=Array.isArray;function C(){}var w={H:null,A:null,T:null,S:null},T=Object.prototype.hasOwnProperty;function E(e,n,r){var i=r.ref;return{$$typeof:t,type:e,key:n,ref:i===void 0?null:i,props:r}}function D(e,t){return E(e.type,t,e.props)}function O(e){return typeof e==`object`&&!!e&&e.$$typeof===t}function k(e){var t={"=":`=0`,":":`=2`};return`$`+e.replace(/[=:]/g,function(e){return t[e]})}var A=/\/+/g;function j(e,t){return typeof e==`object`&&e&&e.key!=null?k(``+e.key):t.toString(36)}function M(e){switch(e.status){case`fulfilled`:return e.value;case`rejected`:throw e.reason;default:switch(typeof e.status==`string`?e.then(C,C):(e.status=`pending`,e.then(function(t){e.status===`pending`&&(e.status=`fulfilled`,e.value=t)},function(t){e.status===`pending`&&(e.status=`rejected`,e.reason=t)})),e.status){case`fulfilled`:return e.value;case`rejected`:throw e.reason}}throw e}function N(e,r,i,a,o){var s=typeof e;(s===`undefined`||s===`boolean`)&&(e=null);var c=!1;if(e===null)c=!0;else switch(s){case`bigint`:case`string`:case`number`:c=!0;break;case`object`:switch(e.$$typeof){case t:case n:c=!0;break;case d:return c=e._init,N(c(e._payload),r,i,a,o)}}if(c)return o=o(e),c=a===``?`.`+j(e,0):a,S(o)?(i=``,c!=null&&(i=c.replace(A,`$&/`)+`/`),N(o,r,i,``,function(e){return e})):o!=null&&(O(o)&&(o=D(o,i+(o.key==null||e&&e.key===o.key?``:(``+o.key).replace(A,`$&/`)+`/`)+c)),r.push(o)),1;c=0;var l=a===``?`.`:a+`:`;if(S(e))for(var u=0;u{t.exports=d()})),p=o((e=>{function t(e,t){var n=e.length;e.push(t);a:for(;0>>1,a=e[r];if(0>>1;ri(c,n))li(u,c)?(e[r]=u,e[l]=n,r=l):(e[r]=c,e[s]=n,r=s);else if(li(u,n))e[r]=u,e[l]=n,r=l;else break a}}return t}function i(e,t){var n=e.sortIndex-t.sortIndex;return n===0?e.id-t.id:n}if(e.unstable_now=void 0,typeof performance==`object`&&typeof performance.now==`function`){var a=performance;e.unstable_now=function(){return a.now()}}else{var o=Date,s=o.now();e.unstable_now=function(){return o.now()-s}}var c=[],l=[],u=1,d=null,f=3,p=!1,m=!1,h=!1,g=!1,_=typeof setTimeout==`function`?setTimeout:null,v=typeof clearTimeout==`function`?clearTimeout:null,y=typeof setImmediate<`u`?setImmediate:null;function b(e){for(var i=n(l);i!==null;){if(i.callback===null)r(l);else if(i.startTime<=e)r(l),i.sortIndex=i.expirationTime,t(c,i);else break;i=n(l)}}function x(e){if(h=!1,b(e),!m)if(n(c)!==null)m=!0,S||(S=!0,O());else{var t=n(l);t!==null&&j(x,t.startTime-e)}}var S=!1,C=-1,w=5,T=-1;function E(){return g?!0:!(e.unstable_now()-Tt&&E());){var o=d.callback;if(typeof o==`function`){d.callback=null,f=d.priorityLevel;var s=o(d.expirationTime<=t);if(t=e.unstable_now(),typeof s==`function`){d.callback=s,b(t),i=!0;break b}d===n(c)&&r(c),b(t)}else r(c);d=n(c)}if(d!==null)i=!0;else{var u=n(l);u!==null&&j(x,u.startTime-t),i=!1}}break a}finally{d=null,f=a,p=!1}i=void 0}}finally{i?O():S=!1}}}var O;if(typeof y==`function`)O=function(){y(D)};else if(typeof MessageChannel<`u`){var k=new MessageChannel,A=k.port2;k.port1.onmessage=D,O=function(){A.postMessage(null)}}else O=function(){_(D,0)};function j(t,n){C=_(function(){t(e.unstable_now())},n)}e.unstable_IdlePriority=5,e.unstable_ImmediatePriority=1,e.unstable_LowPriority=4,e.unstable_NormalPriority=3,e.unstable_Profiling=null,e.unstable_UserBlockingPriority=2,e.unstable_cancelCallback=function(e){e.callback=null},e.unstable_forceFrameRate=function(e){0>e||125o?(r.sortIndex=a,t(l,r),n(c)===null&&r===n(l)&&(h?(v(C),C=-1):h=!0,j(x,a-o))):(r.sortIndex=s,t(c,r),m||p||(m=!0,S||(S=!0,O()))),r},e.unstable_shouldYield=E,e.unstable_wrapCallback=function(e){var t=f;return function(){var n=f;f=t;try{return e.apply(this,arguments)}finally{f=n}}}})),m=o(((e,t)=>{t.exports=p()})),h=o((e=>{var t=f();function n(e){var t=`https://react.dev/errors/`+e;if(1{function n(){if(!(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__>`u`||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!=`function`))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(n)}catch(e){console.error(e)}}n(),t.exports=h()})),_=o((e=>{var t=m(),n=f(),r=g();function i(e){var t=`https://react.dev/errors/`+e;if(1B||(e.current=z[B],z[B]=null,B--)}function H(e,t){B++,z[B]=e.current,e.current=t}var te=V(null),ne=V(null),re=V(null),U=V(null);function ie(e,t){switch(H(re,t),H(ne,e),H(te,null),t.nodeType){case 9:case 11:e=(e=t.documentElement)&&(e=e.namespaceURI)?Hd(e):0;break;default:if(e=t.tagName,t=t.namespaceURI)t=Hd(t),e=Ud(t,e);else switch(e){case`svg`:e=1;break;case`math`:e=2;break;default:e=0}}ee(te),H(te,e)}function ae(){ee(te),ee(ne),ee(re)}function W(e){e.memoizedState!==null&&H(U,e);var t=te.current,n=Ud(t,e.type);t!==n&&(H(ne,e),H(te,n))}function oe(e){ne.current===e&&(ee(te),ee(ne)),U.current===e&&(ee(U),Zf._currentValue=R)}var se,ce;function le(e){if(se===void 0)try{throw Error()}catch(e){var t=e.stack.trim().match(/\n( *(at )?)/);se=t&&t[1]||``,ce=-1()=>(t||(e((t={exports:{}}).exports,t),e=null),t.exports),s=(e,n)=>{let r={};for(var i in e)t(r,i,{get:e[i],enumerable:!0});return n||t(r,Symbol.toStringTag,{value:`Module`}),r},c=(e,i,o,s)=>{if(i&&typeof i==`object`||typeof i==`function`)for(var c=r(i),l=0,u=c.length,d;li[e]).bind(null,d),enumerable:!(s=n(i,d))||s.enumerable});return e},l=(n,r,a)=>(a=n==null?{}:e(i(n)),c(r||!n||!n.__esModule?t(a,`default`,{value:n,enumerable:!0}):a,n)),u=(e=>typeof require<`u`?require:typeof Proxy<`u`?new Proxy(e,{get:(e,t)=>(typeof require<`u`?require:e)[t]}):e)(function(e){if(typeof require<`u`)return require.apply(this,arguments);throw Error('Calling `require` for "'+e+"\" in an environment that doesn't expose the `require` function. See https://rolldown.rs/in-depth/bundling-cjs#require-external-modules for more details.")});(function(){let e=document.createElement(`link`).relList;if(e&&e.supports&&e.supports(`modulepreload`))return;for(let e of document.querySelectorAll(`link[rel="modulepreload"]`))n(e);new MutationObserver(e=>{for(let t of e)if(t.type===`childList`)for(let e of t.addedNodes)e.tagName===`LINK`&&e.rel===`modulepreload`&&n(e)}).observe(document,{childList:!0,subtree:!0});function t(e){let t={};return e.integrity&&(t.integrity=e.integrity),e.referrerPolicy&&(t.referrerPolicy=e.referrerPolicy),e.crossOrigin===`use-credentials`?t.credentials=`include`:e.crossOrigin===`anonymous`?t.credentials=`omit`:t.credentials=`same-origin`,t}function n(e){if(e.ep)return;e.ep=!0;let n=t(e);fetch(e.href,n)}})();var d=o((e=>{var t=Symbol.for(`react.transitional.element`),n=Symbol.for(`react.portal`),r=Symbol.for(`react.fragment`),i=Symbol.for(`react.strict_mode`),a=Symbol.for(`react.profiler`),o=Symbol.for(`react.consumer`),s=Symbol.for(`react.context`),c=Symbol.for(`react.forward_ref`),l=Symbol.for(`react.suspense`),u=Symbol.for(`react.memo`),d=Symbol.for(`react.lazy`),f=Symbol.for(`react.activity`),p=Symbol.iterator;function m(e){return typeof e!=`object`||!e?null:(e=p&&e[p]||e[`@@iterator`],typeof e==`function`?e:null)}var h={isMounted:function(){return!1},enqueueForceUpdate:function(){},enqueueReplaceState:function(){},enqueueSetState:function(){}},g=Object.assign,_={};function v(e,t,n){this.props=e,this.context=t,this.refs=_,this.updater=n||h}v.prototype.isReactComponent={},v.prototype.setState=function(e,t){if(typeof e!=`object`&&typeof e!=`function`&&e!=null)throw Error(`takes an object of state variables to update or a function which returns an object of state variables.`);this.updater.enqueueSetState(this,e,t,`setState`)},v.prototype.forceUpdate=function(e){this.updater.enqueueForceUpdate(this,e,`forceUpdate`)};function y(){}y.prototype=v.prototype;function b(e,t,n){this.props=e,this.context=t,this.refs=_,this.updater=n||h}var x=b.prototype=new y;x.constructor=b,g(x,v.prototype),x.isPureReactComponent=!0;var S=Array.isArray;function C(){}var w={H:null,A:null,T:null,S:null},T=Object.prototype.hasOwnProperty;function E(e,n,r){var i=r.ref;return{$$typeof:t,type:e,key:n,ref:i===void 0?null:i,props:r}}function D(e,t){return E(e.type,t,e.props)}function O(e){return typeof e==`object`&&!!e&&e.$$typeof===t}function k(e){var t={"=":`=0`,":":`=2`};return`$`+e.replace(/[=:]/g,function(e){return t[e]})}var A=/\/+/g;function j(e,t){return typeof e==`object`&&e&&e.key!=null?k(``+e.key):t.toString(36)}function M(e){switch(e.status){case`fulfilled`:return e.value;case`rejected`:throw e.reason;default:switch(typeof e.status==`string`?e.then(C,C):(e.status=`pending`,e.then(function(t){e.status===`pending`&&(e.status=`fulfilled`,e.value=t)},function(t){e.status===`pending`&&(e.status=`rejected`,e.reason=t)})),e.status){case`fulfilled`:return e.value;case`rejected`:throw e.reason}}throw e}function N(e,r,i,a,o){var s=typeof e;(s===`undefined`||s===`boolean`)&&(e=null);var c=!1;if(e===null)c=!0;else switch(s){case`bigint`:case`string`:case`number`:c=!0;break;case`object`:switch(e.$$typeof){case t:case n:c=!0;break;case d:return c=e._init,N(c(e._payload),r,i,a,o)}}if(c)return o=o(e),c=a===``?`.`+j(e,0):a,S(o)?(i=``,c!=null&&(i=c.replace(A,`$&/`)+`/`),N(o,r,i,``,function(e){return e})):o!=null&&(O(o)&&(o=D(o,i+(o.key==null||e&&e.key===o.key?``:(``+o.key).replace(A,`$&/`)+`/`)+c)),r.push(o)),1;c=0;var l=a===``?`.`:a+`:`;if(S(e))for(var u=0;u{t.exports=d()})),p=o((e=>{function t(e,t){var n=e.length;e.push(t);a:for(;0>>1,a=e[r];if(0>>1;ri(c,n))li(u,c)?(e[r]=u,e[l]=n,r=l):(e[r]=c,e[s]=n,r=s);else if(li(u,n))e[r]=u,e[l]=n,r=l;else break a}}return t}function i(e,t){var n=e.sortIndex-t.sortIndex;return n===0?e.id-t.id:n}if(e.unstable_now=void 0,typeof performance==`object`&&typeof performance.now==`function`){var a=performance;e.unstable_now=function(){return a.now()}}else{var o=Date,s=o.now();e.unstable_now=function(){return o.now()-s}}var c=[],l=[],u=1,d=null,f=3,p=!1,m=!1,h=!1,g=!1,_=typeof setTimeout==`function`?setTimeout:null,v=typeof clearTimeout==`function`?clearTimeout:null,y=typeof setImmediate<`u`?setImmediate:null;function b(e){for(var i=n(l);i!==null;){if(i.callback===null)r(l);else if(i.startTime<=e)r(l),i.sortIndex=i.expirationTime,t(c,i);else break;i=n(l)}}function x(e){if(h=!1,b(e),!m)if(n(c)!==null)m=!0,S||(S=!0,O());else{var t=n(l);t!==null&&j(x,t.startTime-e)}}var S=!1,C=-1,w=5,T=-1;function E(){return g?!0:!(e.unstable_now()-Tt&&E());){var o=d.callback;if(typeof o==`function`){d.callback=null,f=d.priorityLevel;var s=o(d.expirationTime<=t);if(t=e.unstable_now(),typeof s==`function`){d.callback=s,b(t),i=!0;break b}d===n(c)&&r(c),b(t)}else r(c);d=n(c)}if(d!==null)i=!0;else{var u=n(l);u!==null&&j(x,u.startTime-t),i=!1}}break a}finally{d=null,f=a,p=!1}i=void 0}}finally{i?O():S=!1}}}var O;if(typeof y==`function`)O=function(){y(D)};else if(typeof MessageChannel<`u`){var k=new MessageChannel,A=k.port2;k.port1.onmessage=D,O=function(){A.postMessage(null)}}else O=function(){_(D,0)};function j(t,n){C=_(function(){t(e.unstable_now())},n)}e.unstable_IdlePriority=5,e.unstable_ImmediatePriority=1,e.unstable_LowPriority=4,e.unstable_NormalPriority=3,e.unstable_Profiling=null,e.unstable_UserBlockingPriority=2,e.unstable_cancelCallback=function(e){e.callback=null},e.unstable_forceFrameRate=function(e){0>e||125o?(r.sortIndex=a,t(l,r),n(c)===null&&r===n(l)&&(h?(v(C),C=-1):h=!0,j(x,a-o))):(r.sortIndex=s,t(c,r),m||p||(m=!0,S||(S=!0,O()))),r},e.unstable_shouldYield=E,e.unstable_wrapCallback=function(e){var t=f;return function(){var n=f;f=t;try{return e.apply(this,arguments)}finally{f=n}}}})),m=o(((e,t)=>{t.exports=p()})),h=o((e=>{var t=f();function n(e){var t=`https://react.dev/errors/`+e;if(1{function n(){if(!(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__>`u`||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!=`function`))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(n)}catch(e){console.error(e)}}n(),t.exports=h()})),_=o((e=>{var t=m(),n=f(),r=g();function i(e){var t=`https://react.dev/errors/`+e;if(1B||(e.current=z[B],z[B]=null,B--)}function H(e,t){B++,z[B]=e.current,e.current=t}var te=V(null),ne=V(null),re=V(null),U=V(null);function ie(e,t){switch(H(re,t),H(ne,e),H(te,null),t.nodeType){case 9:case 11:e=(e=t.documentElement)&&(e=e.namespaceURI)?Hd(e):0;break;default:if(e=t.tagName,t=t.namespaceURI)t=Hd(t),e=Ud(t,e);else switch(e){case`svg`:e=1;break;case`math`:e=2;break;default:e=0}}ee(te),H(te,e)}function ae(){ee(te),ee(ne),ee(re)}function W(e){e.memoizedState!==null&&H(U,e);var t=te.current,n=Ud(t,e.type);t!==n&&(H(ne,e),H(te,n))}function oe(e){ne.current===e&&(ee(te),ee(ne)),U.current===e&&(ee(U),$f._currentValue=R)}var se,ce;function le(e){if(se===void 0)try{throw Error()}catch(e){var t=e.stack.trim().match(/\n( *(at )?)/);se=t&&t[1]||``,ce=-1)`:-1i||c[r]!==l[i]){var u=` `+c[r].replace(` at new `,` at `);return e.displayName&&u.includes(``)&&(u=u.replace(``,e.displayName)),u}while(1<=r&&0<=i);break}}}finally{ue=!1,Error.prepareStackTrace=n}return(n=e?e.displayName||e.name:``)?le(n):``}function fe(e,t){switch(e.tag){case 26:case 27:case 5:return le(e.type);case 16:return le(`Lazy`);case 13:return e.child!==t&&t!==null?le(`Suspense Fallback`):le(`Suspense`);case 19:return le(`SuspenseList`);case 0:case 15:return de(e.type,!1);case 11:return de(e.type.render,!1);case 1:return de(e.type,!0);case 31:return le(`Activity`);default:return``}}function pe(e){try{var t=``,n=null;do t+=fe(e,n),n=e,e=e.return;while(e);return t}catch(e){return` Error generating stack: `+e.message+` -`+e.stack}}var me=Object.prototype.hasOwnProperty,he=t.unstable_scheduleCallback,ge=t.unstable_cancelCallback,_e=t.unstable_shouldYield,ve=t.unstable_requestPaint,ye=t.unstable_now,be=t.unstable_getCurrentPriorityLevel,xe=t.unstable_ImmediatePriority,Se=t.unstable_UserBlockingPriority,Ce=t.unstable_NormalPriority,we=t.unstable_LowPriority,Te=t.unstable_IdlePriority,Ee=t.log,De=t.unstable_setDisableYieldValue,Oe=null,ke=null;function Ae(e){if(typeof Ee==`function`&&De(e),ke&&typeof ke.setStrictMode==`function`)try{ke.setStrictMode(Oe,e)}catch{}}var je=Math.clz32?Math.clz32:Pe,Me=Math.log,Ne=Math.LN2;function Pe(e){return e>>>=0,e===0?32:31-(Me(e)/Ne|0)|0}var Fe=256,Ie=262144,Le=4194304;function Re(e){var t=e&42;if(t!==0)return t;switch(e&-e){case 1:return 1;case 2:return 2;case 4:return 4;case 8:return 8;case 16:return 16;case 32:return 32;case 64:return 64;case 128:return 128;case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:return e&261888;case 262144:case 524288:case 1048576:case 2097152:return e&3932160;case 4194304:case 8388608:case 16777216:case 33554432:return e&62914560;case 67108864:return 67108864;case 134217728:return 134217728;case 268435456:return 268435456;case 536870912:return 536870912;case 1073741824:return 0;default:return e}}function ze(e,t,n){var r=e.pendingLanes;if(r===0)return 0;var i=0,a=e.suspendedLanes,o=e.pingedLanes;e=e.warmLanes;var s=r&134217727;return s===0?(s=r&~a,s===0?o===0?n||(n=r&~e,n!==0&&(i=Re(n))):i=Re(o):i=Re(s)):(r=s&~a,r===0?(o&=s,o===0?n||(n=s&~e,n!==0&&(i=Re(n))):i=Re(o)):i=Re(r)),i===0?0:t!==0&&t!==i&&(t&a)===0&&(a=i&-i,n=t&-t,a>=n||a===32&&n&4194048)?t:i}function Be(e,t){return(e.pendingLanes&~(e.suspendedLanes&~e.pingedLanes)&t)===0}function Ve(e,t){switch(e){case 1:case 2:case 4:case 8:case 64:return t+250;case 16:case 32:case 128:case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:case 262144:case 524288:case 1048576:case 2097152:return t+5e3;case 4194304:case 8388608:case 16777216:case 33554432:return-1;case 67108864:case 134217728:case 268435456:case 536870912:case 1073741824:return-1;default:return-1}}function He(){var e=Le;return Le<<=1,!(Le&62914560)&&(Le=4194304),e}function Ue(e){for(var t=[],n=0;31>n;n++)t.push(e);return t}function We(e,t){e.pendingLanes|=t,t!==268435456&&(e.suspendedLanes=0,e.pingedLanes=0,e.warmLanes=0)}function Ge(e,t,n,r,i,a){var o=e.pendingLanes;e.pendingLanes=n,e.suspendedLanes=0,e.pingedLanes=0,e.warmLanes=0,e.expiredLanes&=n,e.entangledLanes&=n,e.errorRecoveryDisabledLanes&=n,e.shellSuspendCounter=0;var s=e.entanglements,c=e.expirationTimes,l=e.hiddenUpdates;for(n=o&~n;0`u`||window.document===void 0||window.document.createElement===void 0),nn=!1;if(tn)try{var rn={};Object.defineProperty(rn,"passive",{get:function(){nn=!0}}),window.addEventListener(`test`,rn,rn),window.removeEventListener(`test`,rn,rn)}catch{nn=!1}var an=null,on=null,sn=null;function cn(){if(sn)return sn;var e,t=on,n=t.length,r,i=`value`in an?an.value:an.textContent,a=i.length;for(e=0;e=Bn),Un=` `,Wn=!1;function Gn(e,t){switch(e){case`keyup`:return Rn.indexOf(t.keyCode)!==-1;case`keydown`:return t.keyCode!==229;case`keypress`:case`mousedown`:case`focusout`:return!0;default:return!1}}function Kn(e){return e=e.detail,typeof e==`object`&&`data`in e?e.data:null}var qn=!1;function Jn(e,t){switch(e){case`compositionend`:return Kn(t);case`keypress`:return t.which===32?(Wn=!0,Un):null;case`textInput`:return e=t.data,e===Un&&Wn?null:e;default:return null}}function Yn(e,t){if(qn)return e===`compositionend`||!zn&&Gn(e,t)?(e=cn(),sn=on=an=null,qn=!1,e):null;switch(e){case`paste`:return null;case`keypress`:if(!(t.ctrlKey||t.altKey||t.metaKey)||t.ctrlKey&&t.altKey){if(t.char&&1=t)return{node:n,offset:t-e};e=r}a:{for(;n;){if(n.nextSibling){n=n.nextSibling;break a}n=n.parentNode}n=void 0}n=_r(n)}}function yr(e,t){return e&&t?e===t?!0:e&&e.nodeType===3?!1:t&&t.nodeType===3?yr(e,t.parentNode):`contains`in e?e.contains(t):e.compareDocumentPosition?!!(e.compareDocumentPosition(t)&16):!1:!1}function br(e){e=e!=null&&e.ownerDocument!=null&&e.ownerDocument.defaultView!=null?e.ownerDocument.defaultView:window;for(var t=At(e.document);t instanceof e.HTMLIFrameElement;){try{var n=typeof t.contentWindow.location.href==`string`}catch{n=!1}if(n)e=t.contentWindow;else break;t=At(e.document)}return t}function xr(e){var t=e&&e.nodeName&&e.nodeName.toLowerCase();return t&&(t===`input`&&(e.type===`text`||e.type===`search`||e.type===`tel`||e.type===`url`||e.type===`password`)||t===`textarea`||e.contentEditable===`true`)}var Sr=tn&&`documentMode`in document&&11>=document.documentMode,Cr=null,wr=null,Tr=null,Er=!1;function Dr(e,t,n){var r=n.window===n?n.document:n.nodeType===9?n:n.ownerDocument;Er||Cr==null||Cr!==At(r)||(r=Cr,`selectionStart`in r&&xr(r)?r={start:r.selectionStart,end:r.selectionEnd}:(r=(r.ownerDocument&&r.ownerDocument.defaultView||window).getSelection(),r={anchorNode:r.anchorNode,anchorOffset:r.anchorOffset,focusNode:r.focusNode,focusOffset:r.focusOffset}),Tr&&gr(Tr,r)||(Tr=r,r=Ed(wr,`onSelect`),0>=o,i-=o,yi=1<<32-je(t)+i|n<h?(g=d,d=null):g=d.sibling;var _=p(i,d,s[h],c);if(_===null){d===null&&(d=g);break}e&&d&&_.alternate===null&&t(i,d),a=o(_,a,h),u===null?l=_:u.sibling=_,u=_,d=g}if(h===s.length)return n(i,d),Oi&&xi(i,h),l;if(d===null){for(;hg?(_=h,h=null):_=h.sibling;var y=p(a,h,v.value,l);if(y===null){h===null&&(h=_);break}e&&h&&y.alternate===null&&t(a,h),s=o(y,s,g),d===null?u=y:d.sibling=y,d=y,h=_}if(v.done)return n(a,h),Oi&&xi(a,g),u;if(h===null){for(;!v.done;g++,v=c.next())v=f(a,v.value,l),v!==null&&(s=o(v,s,g),d===null?u=v:d.sibling=v,d=v);return Oi&&xi(a,g),u}for(h=r(h);!v.done;g++,v=c.next())v=m(h,a,g,v.value,l),v!==null&&(e&&v.alternate!==null&&h.delete(v.key===null?g:v.key),s=o(v,s,g),d===null?u=v:d.sibling=v,d=v);return e&&h.forEach(function(e){return t(a,e)}),Oi&&xi(a,g),u}function b(e,r,o,c){if(typeof o==`object`&&o&&o.type===y&&o.key===null&&(o=o.props.children),typeof o==`object`&&o){switch(o.$$typeof){case _:a:{for(var l=o.key;r!==null;){if(r.key===l){if(l=o.type,l===y){if(r.tag===7){n(e,r.sibling),c=a(r,o.props.children),c.return=e,e=c;break a}}else if(r.elementType===l||typeof l==`object`&&l&&l.$$typeof===O&&Sa(l)===r.type){n(e,r.sibling),c=a(r,o.props),ka(c,o),c.return=e,e=c;break a}n(e,r);break}else t(e,r);r=r.sibling}o.type===y?(c=oi(o.props.children,e.mode,c,o.key),c.return=e,e=c):(c=ai(o.type,o.key,o.props,null,e.mode,c),ka(c,o),c.return=e,e=c)}return s(e);case v:a:{for(l=o.key;r!==null;){if(r.key===l)if(r.tag===4&&r.stateNode.containerInfo===o.containerInfo&&r.stateNode.implementation===o.implementation){n(e,r.sibling),c=a(r,o.children||[]),c.return=e,e=c;break a}else{n(e,r);break}else t(e,r);r=r.sibling}c=li(o,e.mode,c),c.return=e,e=c}return s(e);case O:return o=Sa(o),b(e,r,o,c)}if(F(o))return h(e,r,o,c);if(M(o)){if(l=M(o),typeof l!=`function`)throw Error(i(150));return o=l.call(o),g(e,r,o,c)}if(typeof o.then==`function`)return b(e,r,Oa(o),c);if(o.$$typeof===C)return b(e,r,Xi(e,o),c);Aa(e,o)}return typeof o==`string`&&o!==``||typeof o==`number`||typeof o==`bigint`?(o=``+o,r!==null&&r.tag===6?(n(e,r.sibling),c=a(r,o),c.return=e,e=c):(n(e,r),c=si(o,e.mode,c),c.return=e,e=c),s(e)):n(e,r)}return function(e,t,n,r){try{Da=0;var i=b(e,t,n,r);return Ea=null,i}catch(t){if(t===ga||t===va)throw t;var a=ti(29,t,null,e.mode);return a.lanes=r,a.return=e,a}}}var Ma=ja(!0),Na=ja(!1),Pa=!1;function Fa(e){e.updateQueue={baseState:e.memoizedState,firstBaseUpdate:null,lastBaseUpdate:null,shared:{pending:null,lanes:0,hiddenCallbacks:null},callbacks:null}}function Ia(e,t){e=e.updateQueue,t.updateQueue===e&&(t.updateQueue={baseState:e.baseState,firstBaseUpdate:e.firstBaseUpdate,lastBaseUpdate:e.lastBaseUpdate,shared:e.shared,callbacks:null})}function La(e){return{lane:e,tag:0,payload:null,callback:null,next:null}}function Ra(e,t,n){var r=e.updateQueue;if(r===null)return null;if(r=r.shared,Fl&2){var i=r.pending;return i===null?t.next=t:(t.next=i.next,i.next=t),r.pending=t,t=Qr(e),Zr(e,null,n),t}return Jr(e,r,t,n),Qr(e)}function za(e,t,n){if(t=t.updateQueue,t!==null&&(t=t.shared,n&4194048)){var r=t.lanes;r&=e.pendingLanes,n|=r,t.lanes=n,qe(e,n)}}function Ba(e,t){var n=e.updateQueue,r=e.alternate;if(r!==null&&(r=r.updateQueue,n===r)){var i=null,a=null;if(n=n.firstBaseUpdate,n!==null){do{var o={lane:n.lane,tag:n.tag,payload:n.payload,callback:null,next:null};a===null?i=a=o:a=a.next=o,n=n.next}while(n!==null);a===null?i=a=t:a=a.next=t}else i=a=t;n={baseState:r.baseState,firstBaseUpdate:i,lastBaseUpdate:a,shared:r.shared,callbacks:r.callbacks},e.updateQueue=n;return}e=n.lastBaseUpdate,e===null?n.firstBaseUpdate=t:e.next=t,n.lastBaseUpdate=t}var Va=!1;function Ha(){if(Va){var e=sa;if(e!==null)throw e}}function Ua(e,t,n,r){Va=!1;var i=e.updateQueue;Pa=!1;var a=i.firstBaseUpdate,o=i.lastBaseUpdate,s=i.shared.pending;if(s!==null){i.shared.pending=null;var c=s,l=c.next;c.next=null,o===null?a=l:o.next=l,o=c;var u=e.alternate;u!==null&&(u=u.updateQueue,s=u.lastBaseUpdate,s!==o&&(s===null?u.firstBaseUpdate=l:s.next=l,u.lastBaseUpdate=c))}if(a!==null){var d=i.baseState;o=0,u=l=c=null,s=a;do{var f=s.lane&-536870913,m=f!==s.lane;if(m?(Rl&f)===f:(r&f)===f){f!==0&&f===oa&&(Va=!0),u!==null&&(u=u.next={lane:0,tag:s.tag,payload:s.payload,callback:null,next:null});a:{var h=e,g=s;f=t;var _=n;switch(g.tag){case 1:if(h=g.payload,typeof h==`function`){d=h.call(_,d,f);break a}d=h;break a;case 3:h.flags=h.flags&-65537|128;case 0:if(h=g.payload,f=typeof h==`function`?h.call(_,d,f):h,f==null)break a;d=p({},d,f);break a;case 2:Pa=!0}}f=s.callback,f!==null&&(e.flags|=64,m&&(e.flags|=8192),m=i.callbacks,m===null?i.callbacks=[f]:m.push(f))}else m={lane:f,tag:s.tag,payload:s.payload,callback:s.callback,next:null},u===null?(l=u=m,c=d):u=u.next=m,o|=f;if(s=s.next,s===null){if(s=i.shared.pending,s===null)break;m=s,s=m.next,m.next=null,i.lastBaseUpdate=m,i.shared.pending=null}}while(1);u===null&&(c=d),i.baseState=c,i.firstBaseUpdate=l,i.lastBaseUpdate=u,a===null&&(i.shared.lanes=0),Kl|=o,e.lanes=o,e.memoizedState=d}}function Wa(e,t){if(typeof e!=`function`)throw Error(i(191,e));e.call(t)}function Ga(e,t){var n=e.callbacks;if(n!==null)for(e.callbacks=null,e=0;ea?a:8;var o=I.T,s={};I.T=s,ks(e,!1,t,n);try{var c=i(),l=I.S;l!==null&&l(s,c),typeof c==`object`&&c&&typeof c.then==`function`?Os(e,t,ua(c,r),mu(e)):Os(e,t,r,mu(e))}catch(n){Os(e,t,{then:function(){},status:`rejected`,reason:n},mu())}finally{L.p=a,o!==null&&s.types!==null&&(o.types=s.types),I.T=o}}function vs(){}function ys(e,t,n,r){if(e.tag!==5)throw Error(i(476));var a=bs(e).queue;_s(e,a,t,R,n===null?vs:function(){return xs(e),n(r)})}function bs(e){var t=e.memoizedState;if(t!==null)return t;t={memoizedState:R,baseState:R,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:ko,lastRenderedState:R},next:null};var n={};return t.next={memoizedState:n,baseState:n,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:ko,lastRenderedState:n},next:null},e.memoizedState=t,e=e.alternate,e!==null&&(e.memoizedState=t),t}function xs(e){var t=bs(e);t.next===null&&(t=e.alternate.memoizedState),Os(e,t.next.queue,{},mu())}function Ss(){return Yi(Zf)}function Cs(){return wo().memoizedState}function ws(){return wo().memoizedState}function Ts(e){for(var t=e.return;t!==null;){switch(t.tag){case 24:case 3:var n=mu();e=La(n);var r=Ra(t,e,n);r!==null&&(gu(r,t,n),za(r,t,n)),t={cache:na()},e.payload=t;return}t=t.return}}function Es(e,t,n){var r=mu();n={lane:r,revertLane:0,gesture:null,action:n,hasEagerState:!1,eagerState:null,next:null},As(e)?js(t,n):(n=Yr(e,t,n,r),n!==null&&(gu(n,e,r),Ms(n,t,r)))}function Ds(e,t,n){Os(e,t,n,mu())}function Os(e,t,n,r){var i={lane:r,revertLane:0,gesture:null,action:n,hasEagerState:!1,eagerState:null,next:null};if(As(e))js(t,i);else{var a=e.alternate;if(e.lanes===0&&(a===null||a.lanes===0)&&(a=t.lastRenderedReducer,a!==null))try{var o=t.lastRenderedState,s=a(o,n);if(i.hasEagerState=!0,i.eagerState=s,hr(s,o))return Jr(e,t,i,0),Il===null&&qr(),!1}catch{}if(n=Yr(e,t,i,r),n!==null)return gu(n,e,r),Ms(n,t,r),!0}return!1}function ks(e,t,n,r){if(r={lane:2,revertLane:dd(),gesture:null,action:r,hasEagerState:!1,eagerState:null,next:null},As(e)){if(t)throw Error(i(479))}else t=Yr(e,n,r,2),t!==null&&gu(t,e,2)}function As(e){var t=e.alternate;return e===oo||t!==null&&t===oo}function js(e,t){uo=lo=!0;var n=e.pending;n===null?t.next=t:(t.next=n.next,n.next=t),e.pending=t}function Ms(e,t,n){if(n&4194048){var r=t.lanes;r&=e.pendingLanes,n|=r,t.lanes=n,qe(e,n)}}var Ns={readContext:Yi,use:Do,useCallback:ho,useContext:ho,useEffect:ho,useImperativeHandle:ho,useLayoutEffect:ho,useInsertionEffect:ho,useMemo:ho,useReducer:ho,useRef:ho,useState:ho,useDebugValue:ho,useDeferredValue:ho,useTransition:ho,useSyncExternalStore:ho,useId:ho,useHostTransitionStatus:ho,useFormState:ho,useActionState:ho,useOptimistic:ho,useMemoCache:ho,useCacheRefresh:ho};Ns.useEffectEvent=ho;var Ps={readContext:Yi,use:Do,useCallback:function(e,t){return Co().memoizedState=[e,t===void 0?null:t],e},useContext:Yi,useEffect:rs,useImperativeHandle:function(e,t,n){n=n==null?null:n.concat([e]),ts(4194308,4,us.bind(null,t,e),n)},useLayoutEffect:function(e,t){return ts(4194308,4,e,t)},useInsertionEffect:function(e,t){ts(4,2,e,t)},useMemo:function(e,t){var n=Co();t=t===void 0?null:t;var r=e();if(fo){Ae(!0);try{e()}finally{Ae(!1)}}return n.memoizedState=[r,t],r},useReducer:function(e,t,n){var r=Co();if(n!==void 0){var i=n(t);if(fo){Ae(!0);try{n(t)}finally{Ae(!1)}}}else i=t;return r.memoizedState=r.baseState=i,e={pending:null,lanes:0,dispatch:null,lastRenderedReducer:e,lastRenderedState:i},r.queue=e,e=e.dispatch=Es.bind(null,oo,e),[r.memoizedState,e]},useRef:function(e){var t=Co();return e={current:e},t.memoizedState=e},useState:function(e){e=zo(e);var t=e.queue,n=Ds.bind(null,oo,t);return t.dispatch=n,[e.memoizedState,n]},useDebugValue:fs,useDeferredValue:function(e,t){return hs(Co(),e,t)},useTransition:function(){var e=zo(!1);return e=_s.bind(null,oo,e.queue,!0,!1),Co().memoizedState=e,[!1,e]},useSyncExternalStore:function(e,t,n){var r=oo,a=Co();if(Oi){if(n===void 0)throw Error(i(407));n=n()}else{if(n=t(),Il===null)throw Error(i(349));Rl&127||Po(r,t,n)}a.memoizedState=n;var o={value:n,getSnapshot:t};return a.queue=o,rs(Io.bind(null,r,o,e),[e]),r.flags|=2048,$o(9,{destroy:void 0},Fo.bind(null,r,o,n,t),null),n},useId:function(){var e=Co(),t=Il.identifierPrefix;if(Oi){var n=bi,r=yi;n=(r&~(1<<32-je(r)-1)).toString(32)+n,t=`_`+t+`R_`+n,n=po++,0<\/script>`,o=o.removeChild(o.firstChild);break;case`select`:o=typeof r.is==`string`?s.createElement(`select`,{is:r.is}):s.createElement(`select`),r.multiple?o.multiple=!0:r.size&&(o.size=r.size);break;default:o=typeof r.is==`string`?s.createElement(a,{is:r.is}):s.createElement(a)}}o[et]=t,o[tt]=r;a:for(s=t.child;s!==null;){if(s.tag===5||s.tag===6)o.appendChild(s.stateNode);else if(s.tag!==4&&s.tag!==27&&s.child!==null){s.child.return=s,s=s.child;continue}if(s===t)break a;for(;s.sibling===null;){if(s.return===null||s.return===t)break a;s=s.return}s.sibling.return=s.return,s=s.sibling}t.stateNode=o;a:switch(Fd(o,a,r),a){case`button`:case`input`:case`select`:case`textarea`:r=!!r.autoFocus;break a;case`img`:r=!0;break a;default:r=!1}r&&Oc(t)}}return Nc(t),kc(t,t.type,e===null?null:e.memoizedProps,t.pendingProps,n),null;case 6:if(e&&t.stateNode!=null)e.memoizedProps!==r&&Oc(t);else{if(typeof r!=`string`&&t.stateNode===null)throw Error(i(166));if(e=re.current,Fi(t)){if(e=t.stateNode,n=t.memoizedProps,r=null,a=Ei,a!==null)switch(a.tag){case 27:case 5:r=a.memoizedProps}e[et]=t,e=!!(e.nodeValue===n||r!==null&&!0===r.suppressHydrationWarning||Md(e.nodeValue,n)),e||Mi(t,!0)}else e=Vd(e).createTextNode(r),e[et]=t,t.stateNode=e}return Nc(t),null;case 31:if(n=t.memoizedState,e===null||e.memoizedState!==null){if(r=Fi(t),n!==null){if(e===null){if(!r)throw Error(i(318));if(e=t.memoizedState,e=e===null?null:e.dehydrated,!e)throw Error(i(557));e[et]=t}else Ii(),!(t.flags&128)&&(t.memoizedState=null),t.flags|=4;Nc(t),e=!1}else n=Li(),e!==null&&e.memoizedState!==null&&(e.memoizedState.hydrationErrors=n),e=!0;if(!e)return t.flags&256?(no(t),t):(no(t),null);if(t.flags&128)throw Error(i(558))}return Nc(t),null;case 13:if(r=t.memoizedState,e===null||e.memoizedState!==null&&e.memoizedState.dehydrated!==null){if(a=Fi(t),r!==null&&r.dehydrated!==null){if(e===null){if(!a)throw Error(i(318));if(a=t.memoizedState,a=a===null?null:a.dehydrated,!a)throw Error(i(317));a[et]=t}else Ii(),!(t.flags&128)&&(t.memoizedState=null),t.flags|=4;Nc(t),a=!1}else a=Li(),e!==null&&e.memoizedState!==null&&(e.memoizedState.hydrationErrors=a),a=!0;if(!a)return t.flags&256?(no(t),t):(no(t),null)}return no(t),t.flags&128?(t.lanes=n,t):(n=r!==null,e=e!==null&&e.memoizedState!==null,n&&(r=t.child,a=null,r.alternate!==null&&r.alternate.memoizedState!==null&&r.alternate.memoizedState.cachePool!==null&&(a=r.alternate.memoizedState.cachePool.pool),o=null,r.memoizedState!==null&&r.memoizedState.cachePool!==null&&(o=r.memoizedState.cachePool.pool),o!==a&&(r.flags|=2048)),n!==e&&n&&(t.child.flags|=8192),jc(t,t.updateQueue),Nc(t),null);case 4:return ae(),e===null&&Cd(t.stateNode.containerInfo),Nc(t),null;case 10:return Ui(t.type),Nc(t),null;case 19:if(ee(ro),r=t.memoizedState,r===null)return Nc(t),null;if(a=(t.flags&128)!=0,o=r.rendering,o===null)if(a)Mc(r,!1);else{if(Gl!==0||e!==null&&e.flags&128)for(e=t.child;e!==null;){if(o=io(e),o!==null){for(t.flags|=128,Mc(r,!1),e=o.updateQueue,t.updateQueue=e,jc(t,e),t.subtreeFlags=0,e=n,n=t.child;n!==null;)ii(n,e),n=n.sibling;return H(ro,ro.current&1|2),Oi&&xi(t,r.treeForkCount),t.child}e=e.sibling}r.tail!==null&&ye()>nu&&(t.flags|=128,a=!0,Mc(r,!1),t.lanes=4194304)}else{if(!a)if(e=io(o),e!==null){if(t.flags|=128,a=!0,e=e.updateQueue,t.updateQueue=e,jc(t,e),Mc(r,!0),r.tail===null&&r.tailMode===`hidden`&&!o.alternate&&!Oi)return Nc(t),null}else 2*ye()-r.renderingStartTime>nu&&n!==536870912&&(t.flags|=128,a=!0,Mc(r,!1),t.lanes=4194304);r.isBackwards?(o.sibling=t.child,t.child=o):(e=r.last,e===null?t.child=o:e.sibling=o,r.last=o)}return r.tail===null?(Nc(t),null):(e=r.tail,r.rendering=e,r.tail=e.sibling,r.renderingStartTime=ye(),e.sibling=null,n=ro.current,H(ro,a?n&1|2:n&1),Oi&&xi(t,r.treeForkCount),e);case 22:case 23:return no(t),Xa(),r=t.memoizedState!==null,e===null?r&&(t.flags|=8192):e.memoizedState!==null!==r&&(t.flags|=8192),r?n&536870912&&!(t.flags&128)&&(Nc(t),t.subtreeFlags&6&&(t.flags|=8192)):Nc(t),n=t.updateQueue,n!==null&&jc(t,n.retryQueue),n=null,e!==null&&e.memoizedState!==null&&e.memoizedState.cachePool!==null&&(n=e.memoizedState.cachePool.pool),r=null,t.memoizedState!==null&&t.memoizedState.cachePool!==null&&(r=t.memoizedState.cachePool.pool),r!==n&&(t.flags|=2048),e!==null&&ee(fa),null;case 24:return n=null,e!==null&&(n=e.memoizedState.cache),t.memoizedState.cache!==n&&(t.flags|=2048),Ui(ta),Nc(t),null;case 25:return null;case 30:return null}throw Error(i(156,t.tag))}function Fc(e,t){switch(wi(t),t.tag){case 1:return e=t.flags,e&65536?(t.flags=e&-65537|128,t):null;case 3:return Ui(ta),ae(),e=t.flags,e&65536&&!(e&128)?(t.flags=e&-65537|128,t):null;case 26:case 27:case 5:return oe(t),null;case 31:if(t.memoizedState!==null){if(no(t),t.alternate===null)throw Error(i(340));Ii()}return e=t.flags,e&65536?(t.flags=e&-65537|128,t):null;case 13:if(no(t),e=t.memoizedState,e!==null&&e.dehydrated!==null){if(t.alternate===null)throw Error(i(340));Ii()}return e=t.flags,e&65536?(t.flags=e&-65537|128,t):null;case 19:return ee(ro),null;case 4:return ae(),null;case 10:return Ui(t.type),null;case 22:case 23:return no(t),Xa(),e!==null&&ee(fa),e=t.flags,e&65536?(t.flags=e&-65537|128,t):null;case 24:return Ui(ta),null;case 25:return null;default:return null}}function Ic(e,t){switch(wi(t),t.tag){case 3:Ui(ta),ae();break;case 26:case 27:case 5:oe(t);break;case 4:ae();break;case 31:t.memoizedState!==null&&no(t);break;case 13:no(t);break;case 19:ee(ro);break;case 10:Ui(t.type);break;case 22:case 23:no(t),Xa(),e!==null&&ee(fa);break;case 24:Ui(ta)}}function Lc(e,t){try{var n=t.updateQueue,r=n===null?null:n.lastEffect;if(r!==null){var i=r.next;n=i;do{if((n.tag&e)===e){r=void 0;var a=n.create,o=n.inst;r=a(),o.destroy=r}n=n.next}while(n!==i)}}catch(e){Ku(t,t.return,e)}}function Rc(e,t,n){try{var r=t.updateQueue,i=r===null?null:r.lastEffect;if(i!==null){var a=i.next;r=a;do{if((r.tag&e)===e){var o=r.inst,s=o.destroy;if(s!==void 0){o.destroy=void 0,i=t;var c=n,l=s;try{l()}catch(e){Ku(i,c,e)}}}r=r.next}while(r!==a)}}catch(e){Ku(t,t.return,e)}}function zc(e){var t=e.updateQueue;if(t!==null){var n=e.stateNode;try{Ga(t,n)}catch(t){Ku(e,e.return,t)}}}function Bc(e,t,n){n.props=Vs(e.type,e.memoizedProps),n.state=e.memoizedState;try{n.componentWillUnmount()}catch(n){Ku(e,t,n)}}function X(e,t){try{var n=e.ref;if(n!==null){switch(e.tag){case 26:case 27:case 5:var r=e.stateNode;break;case 30:r=e.stateNode;break;default:r=e.stateNode}typeof n==`function`?e.refCleanup=n(r):n.current=r}}catch(n){Ku(e,t,n)}}function Vc(e,t){var n=e.ref,r=e.refCleanup;if(n!==null)if(typeof r==`function`)try{r()}catch(n){Ku(e,t,n)}finally{e.refCleanup=null,e=e.alternate,e!=null&&(e.refCleanup=null)}else if(typeof n==`function`)try{n(null)}catch(n){Ku(e,t,n)}else n.current=null}function Hc(e){var t=e.type,n=e.memoizedProps,r=e.stateNode;try{a:switch(t){case`button`:case`input`:case`select`:case`textarea`:n.autoFocus&&r.focus();break a;case`img`:n.src?r.src=n.src:n.srcSet&&(r.srcset=n.srcSet)}}catch(t){Ku(e,e.return,t)}}function Uc(e,t,n){try{var r=e.stateNode;Id(r,e.type,n,t),r[tt]=t}catch(t){Ku(e,e.return,t)}}function Wc(e){return e.tag===5||e.tag===3||e.tag===26||e.tag===27&&Qd(e.type)||e.tag===4}function Gc(e){a:for(;;){for(;e.sibling===null;){if(e.return===null||Wc(e.return))return null;e=e.return}for(e.sibling.return=e.return,e=e.sibling;e.tag!==5&&e.tag!==6&&e.tag!==18;){if(e.tag===27&&Qd(e.type)||e.flags&2||e.child===null||e.tag===4)continue a;e.child.return=e,e=e.child}if(!(e.flags&2))return e.stateNode}}function Kc(e,t,n){var r=e.tag;if(r===5||r===6)e=e.stateNode,t?(n.nodeType===9?n.body:n.nodeName===`HTML`?n.ownerDocument.body:n).insertBefore(e,t):(t=n.nodeType===9?n.body:n.nodeName===`HTML`?n.ownerDocument.body:n,t.appendChild(e),n=n._reactRootContainer,n!=null||t.onclick!==null||(t.onclick=Kt));else if(r!==4&&(r===27&&Qd(e.type)&&(n=e.stateNode,t=null),e=e.child,e!==null))for(Kc(e,t,n),e=e.sibling;e!==null;)Kc(e,t,n),e=e.sibling}function qc(e,t,n){var r=e.tag;if(r===5||r===6)e=e.stateNode,t?n.insertBefore(e,t):n.appendChild(e);else if(r!==4&&(r===27&&Qd(e.type)&&(n=e.stateNode),e=e.child,e!==null))for(qc(e,t,n),e=e.sibling;e!==null;)qc(e,t,n),e=e.sibling}function Jc(e){var t=e.stateNode,n=e.memoizedProps;try{for(var r=e.type,i=t.attributes;i.length;)t.removeAttributeNode(i[0]);Fd(t,r,n),t[et]=e,t[tt]=n}catch(t){Ku(e,e.return,t)}}var Yc=!1,Xc=!1,Zc=!1,Qc=typeof WeakSet==`function`?WeakSet:Set,$c=null;function el(e,t){if(e=e.containerInfo,zd=op,e=br(e),xr(e)){if(`selectionStart`in e)var n={start:e.selectionStart,end:e.selectionEnd};else a:{n=(n=e.ownerDocument)&&n.defaultView||window;var r=n.getSelection&&n.getSelection();if(r&&r.rangeCount!==0){n=r.anchorNode;var a=r.anchorOffset,o=r.focusNode;r=r.focusOffset;try{n.nodeType,o.nodeType}catch{n=null;break a}var s=0,c=-1,l=-1,u=0,d=0,f=e,p=null;b:for(;;){for(var m;f!==n||a!==0&&f.nodeType!==3||(c=s+a),f!==o||r!==0&&f.nodeType!==3||(l=s+r),f.nodeType===3&&(s+=f.nodeValue.length),(m=f.firstChild)!==null;)p=f,f=m;for(;;){if(f===e)break b;if(p===n&&++u===a&&(c=s),p===o&&++d===r&&(l=s),(m=f.nextSibling)!==null)break;f=p,p=f.parentNode}f=m}n=c===-1||l===-1?null:{start:c,end:l}}else n=null}n||={start:0,end:0}}else n=null;for(Bd={focusedElem:e,selectionRange:n},op=!1,$c=t;$c!==null;)if(t=$c,e=t.child,t.subtreeFlags&1028&&e!==null)e.return=t,$c=e;else for(;$c!==null;){switch(t=$c,o=t.alternate,e=t.flags,t.tag){case 0:if(e&4&&(e=t.updateQueue,e=e===null?null:e.events,e!==null))for(n=0;n title`))),Fd(o,r,n),o[et]=e,pt(o),r=o;break a;case`link`:var s=Vf(`link`,`href`,a).get(r+(n.href||``));if(s){for(var c=0;cg&&(o=g,g=h,h=o);var _=vr(s,h),v=vr(s,g);if(_&&v&&(p.rangeCount!==1||p.anchorNode!==_.node||p.anchorOffset!==_.offset||p.focusNode!==v.node||p.focusOffset!==v.offset)){var y=d.createRange();y.setStart(_.node,_.offset),p.removeAllRanges(),h>g?(p.addRange(y),p.extend(v.node,v.offset)):(y.setEnd(v.node,v.offset),p.addRange(y))}}}}for(d=[],p=s;p=p.parentNode;)p.nodeType===1&&d.push({element:p,left:p.scrollLeft,top:p.scrollTop});for(typeof s.focus==`function`&&s.focus(),s=0;sn?32:n,I.T=null,n=uu,uu=null;var o=ou,s=cu;if(au=0,su=ou=null,cu=0,Fl&6)throw Error(i(331));var c=Fl;if(Fl|=4,Al(o.current),Sl(o,o.current,s,n),Fl=c,id(0,!1),ke&&typeof ke.onPostCommitFiberRoot==`function`)try{ke.onPostCommitFiberRoot(Oe,o)}catch{}return!0}finally{L.p=a,I.T=r,Hu(e,t)}}function Gu(e,t,n){t=di(n,t),t=qs(e.stateNode,t,2),e=Ra(e,t,2),e!==null&&(We(e,2),rd(e))}function Ku(e,t,n){if(e.tag===3)Gu(e,e,n);else for(;t!==null;){if(t.tag===3){Gu(t,e,n);break}else if(t.tag===1){var r=t.stateNode;if(typeof t.type.getDerivedStateFromError==`function`||typeof r.componentDidCatch==`function`&&(iu===null||!iu.has(r))){e=di(n,e),n=Js(2),r=Ra(t,n,2),r!==null&&(Ys(n,r,t,e),We(r,2),rd(r));break}}t=t.return}}function qu(e,t,n){var r=e.pingCache;if(r===null){r=e.pingCache=new Pl;var i=new Set;r.set(t,i)}else i=r.get(t),i===void 0&&(i=new Set,r.set(t,i));i.has(n)||(Ul=!0,i.add(n),e=Ju.bind(null,e,t,n),t.then(e,e))}function Ju(e,t,n){var r=e.pingCache;r!==null&&r.delete(t),e.pingedLanes|=e.suspendedLanes&n,e.warmLanes&=~n,Il===e&&(Rl&n)===n&&(Gl===4||Gl===3&&(Rl&62914560)===Rl&&300>ye()-eu?!(Fl&2)&&Cu(e,0):Jl|=n,Xl===Rl&&(Xl=0)),rd(e)}function Z(e,t){t===0&&(t=He()),e=Xr(e,t),e!==null&&(We(e,t),rd(e))}function Yu(e){var t=e.memoizedState,n=0;t!==null&&(n=t.retryLane),Z(e,n)}function Q(e,t){var n=0;switch(e.tag){case 31:case 13:var r=e.stateNode,a=e.memoizedState;a!==null&&(n=a.retryLane);break;case 19:r=e.stateNode;break;case 22:r=e.stateNode._retryCache;break;default:throw Error(i(314))}r!==null&&r.delete(t),Z(e,n)}function Xu(e,t){return he(e,t)}var Zu=null,Qu=null,$u=!1,ed=!1,td=!1,nd=0;function rd(e){e!==Qu&&e.next===null&&(Qu===null?Zu=Qu=e:Qu=Qu.next=e),ed=!0,$u||($u=!0,ud())}function id(e,t){if(!td&&ed){td=!0;do for(var n=!1,r=Zu;r!==null;){if(!t)if(e!==0){var i=r.pendingLanes;if(i===0)var a=0;else{var o=r.suspendedLanes,s=r.pingedLanes;a=(1<<31-je(42|e)+1)-1,a&=i&~(o&~s),a=a&201326741?a&201326741|1:a?a|2:0}a!==0&&(n=!0,ld(r,a))}else a=Rl,a=ze(r,r===Il?a:0,r.cancelPendingCommit!==null||r.timeoutHandle!==-1),!(a&3)||Be(r,a)||(n=!0,ld(r,a));r=r.next}while(n);td=!1}}function ad(){od()}function od(){ed=$u=!1;var e=0;nd!==0&&Kd()&&(e=nd);for(var t=ye(),n=null,r=Zu;r!==null;){var i=r.next,a=sd(r,t);a===0?(r.next=null,n===null?Zu=i:n.next=i,i===null&&(Qu=n)):(n=r,(e!==0||a&3)&&(ed=!0)),r=i}au!==0&&au!==5||id(e,!1),nd!==0&&(nd=0)}function sd(e,t){for(var n=e.suspendedLanes,r=e.pingedLanes,i=e.expirationTimes,a=e.pendingLanes&-62914561;0s)break;var u=c.transferSize,d=c.initiatorType;u&&Ld(d)&&(c=c.responseEnd,o+=u*(c`u`?null:document;function Sf(e,t,n){var r=xf;if(r&&typeof t==`string`&&t){var i=Mt(t);i=`link[rel="`+e+`"][href="`+i+`"]`,typeof n==`string`&&(i+=`[crossorigin="`+n+`"]`),gf.has(i)||(gf.add(i),e={rel:e,crossOrigin:n,href:t},r.querySelector(i)===null&&(t=r.createElement(`link`),Fd(t,`link`,e),pt(t),r.head.appendChild(t)))}}function Cf(e){vf.D(e),Sf(`dns-prefetch`,e,null)}function wf(e,t){vf.C(e,t),Sf(`preconnect`,e,t)}function Tf(e,t,n){vf.L(e,t,n);var r=xf;if(r&&e&&t){var i=`link[rel="preload"][as="`+Mt(t)+`"]`;t===`image`&&n&&n.imageSrcSet?(i+=`[imagesrcset="`+Mt(n.imageSrcSet)+`"]`,typeof n.imageSizes==`string`&&(i+=`[imagesizes="`+Mt(n.imageSizes)+`"]`)):i+=`[href="`+Mt(e)+`"]`;var a=i;switch(t){case`style`:a=Af(e);break;case`script`:a=Pf(e)}hf.has(a)||(e=p({rel:`preload`,href:t===`image`&&n&&n.imageSrcSet?void 0:e,as:t},n),hf.set(a,e),r.querySelector(i)!==null||t===`style`&&r.querySelector(jf(a))||t===`script`&&r.querySelector(Ff(a))||(t=r.createElement(`link`),Fd(t,`link`,e),pt(t),r.head.appendChild(t)))}}function Ef(e,t){vf.m(e,t);var n=xf;if(n&&e){var r=t&&typeof t.as==`string`?t.as:`script`,i=`link[rel="modulepreload"][as="`+Mt(r)+`"][href="`+Mt(e)+`"]`,a=i;switch(r){case`audioworklet`:case`paintworklet`:case`serviceworker`:case`sharedworker`:case`worker`:case`script`:a=Pf(e)}if(!hf.has(a)&&(e=p({rel:`modulepreload`,href:e},t),hf.set(a,e),n.querySelector(i)===null)){switch(r){case`audioworklet`:case`paintworklet`:case`serviceworker`:case`sharedworker`:case`worker`:case`script`:if(n.querySelector(Ff(a)))return}r=n.createElement(`link`),Fd(r,`link`,e),pt(r),n.head.appendChild(r)}}}function Df(e,t,n){vf.S(e,t,n);var r=xf;if(r&&e){var i=ft(r).hoistableStyles,a=Af(e);t||=`default`;var o=i.get(a);if(!o){var s={loading:0,preload:null};if(o=r.querySelector(jf(a)))s.loading=5;else{e=p({rel:`stylesheet`,href:e,"data-precedence":t},n),(n=hf.get(a))&&Rf(e,n);var c=o=r.createElement(`link`);pt(c),Fd(c,`link`,e),c._p=new Promise(function(e,t){c.onload=e,c.onerror=t}),c.addEventListener(`load`,function(){s.loading|=1}),c.addEventListener(`error`,function(){s.loading|=2}),s.loading|=4,Lf(o,t,r)}o={type:`stylesheet`,instance:o,count:1,state:s},i.set(a,o)}}}function eee(e,t){vf.X(e,t);var n=xf;if(n&&e){var r=ft(n).hoistableScripts,i=Pf(e),a=r.get(i);a||(a=n.querySelector(Ff(i)),a||(e=p({src:e,async:!0},t),(t=hf.get(i))&&zf(e,t),a=n.createElement(`script`),pt(a),Fd(a,`link`,e),n.head.appendChild(a)),a={type:`script`,instance:a,count:1,state:null},r.set(i,a))}}function Of(e,t){vf.M(e,t);var n=xf;if(n&&e){var r=ft(n).hoistableScripts,i=Pf(e),a=r.get(i);a||(a=n.querySelector(Ff(i)),a||(e=p({src:e,async:!0,type:`module`},t),(t=hf.get(i))&&zf(e,t),a=n.createElement(`script`),pt(a),Fd(a,`link`,e),n.head.appendChild(a)),a={type:`script`,instance:a,count:1,state:null},r.set(i,a))}}function kf(e,t,n,r){var a=(a=re.current)?_f(a):null;if(!a)throw Error(i(446));switch(e){case`meta`:case`title`:return null;case`style`:return typeof n.precedence==`string`&&typeof n.href==`string`?(t=Af(n.href),n=ft(a).hoistableStyles,r=n.get(t),r||(r={type:`style`,instance:null,count:0,state:null},n.set(t,r)),r):{type:`void`,instance:null,count:0,state:null};case`link`:if(n.rel===`stylesheet`&&typeof n.href==`string`&&typeof n.precedence==`string`){e=Af(n.href);var o=ft(a).hoistableStyles,s=o.get(e);if(s||(a=a.ownerDocument||a,s={type:`stylesheet`,instance:null,count:0,state:{loading:0,preload:null}},o.set(e,s),(o=a.querySelector(jf(e)))&&!o._p&&(s.instance=o,s.state.loading=5),hf.has(e)||(n={rel:`preload`,as:`style`,href:n.href,crossOrigin:n.crossOrigin,integrity:n.integrity,media:n.media,hrefLang:n.hrefLang,referrerPolicy:n.referrerPolicy},hf.set(e,n),o||Nf(a,e,n,s.state))),t&&r===null)throw Error(i(528,``));return s}if(t&&r!==null)throw Error(i(529,``));return null;case`script`:return t=n.async,n=n.src,typeof n==`string`&&t&&typeof t!=`function`&&typeof t!=`symbol`?(t=Pf(n),n=ft(a).hoistableScripts,r=n.get(t),r||(r={type:`script`,instance:null,count:0,state:null},n.set(t,r)),r):{type:`void`,instance:null,count:0,state:null};default:throw Error(i(444,e))}}function Af(e){return`href="`+Mt(e)+`"`}function jf(e){return`link[rel="stylesheet"][`+e+`]`}function Mf(e){return p({},e,{"data-precedence":e.precedence,precedence:null})}function Nf(e,t,n,r){e.querySelector(`link[rel="preload"][as="style"][`+t+`]`)?r.loading=1:(t=e.createElement(`link`),r.preload=t,t.addEventListener(`load`,function(){return r.loading|=1}),t.addEventListener(`error`,function(){return r.loading|=2}),Fd(t,`link`,n),pt(t),e.head.appendChild(t))}function Pf(e){return`[src="`+Mt(e)+`"]`}function Ff(e){return`script[async]`+e}function If(e,t,n){if(t.count++,t.instance===null)switch(t.type){case`style`:var r=e.querySelector(`style[data-href~="`+Mt(n.href)+`"]`);if(r)return t.instance=r,pt(r),r;var a=p({},n,{"data-href":n.href,"data-precedence":n.precedence,href:null,precedence:null});return r=(e.ownerDocument||e).createElement(`style`),pt(r),Fd(r,`style`,a),Lf(r,n.precedence,e),t.instance=r;case`stylesheet`:a=Af(n.href);var o=e.querySelector(jf(a));if(o)return t.state.loading|=4,t.instance=o,pt(o),o;r=Mf(n),(a=hf.get(a))&&Rf(r,a),o=(e.ownerDocument||e).createElement(`link`),pt(o);var s=o;return s._p=new Promise(function(e,t){s.onload=e,s.onerror=t}),Fd(o,`link`,r),t.state.loading|=4,Lf(o,n.precedence,e),t.instance=o;case`script`:return o=Pf(n.src),(a=e.querySelector(Ff(o)))?(t.instance=a,pt(a),a):(r=n,(a=hf.get(o))&&(r=p({},n),zf(r,a)),e=e.ownerDocument||e,a=e.createElement(`script`),pt(a),Fd(a,`link`,r),e.head.appendChild(a),t.instance=a);case`void`:return null;default:throw Error(i(443,t.type))}else t.type===`stylesheet`&&!(t.state.loading&4)&&(r=t.instance,t.state.loading|=4,Lf(r,n.precedence,e));return t.instance}function Lf(e,t,n){for(var r=n.querySelectorAll(`link[rel="stylesheet"][data-precedence],style[data-precedence]`),i=r.length?r[r.length-1]:null,a=i,o=0;o title`):null)}function Uf(e,t,n){if(n===1||t.itemProp!=null)return!1;switch(e){case`meta`:case`title`:return!0;case`style`:if(typeof t.precedence!=`string`||typeof t.href!=`string`||t.href===``)break;return!0;case`link`:if(typeof t.rel!=`string`||typeof t.href!=`string`||t.href===``||t.onLoad||t.onError)break;switch(t.rel){case`stylesheet`:return e=t.disabled,typeof t.precedence==`string`&&e==null;default:return!0}case`script`:if(t.async&&typeof t.async!=`function`&&typeof t.async!=`symbol`&&!t.onLoad&&!t.onError&&t.src&&typeof t.src==`string`)return!0}return!1}function Wf(e){return!(e.type===`stylesheet`&&!(e.state.loading&3))}function Gf(e,t,n,r){if(n.type===`stylesheet`&&(typeof r.media!=`string`||!1!==matchMedia(r.media).matches)&&!(n.state.loading&4)){if(n.instance===null){var i=Af(r.href),a=t.querySelector(jf(i));if(a){t=a._p,typeof t==`object`&&t&&typeof t.then==`function`&&(e.count++,e=Jf.bind(e),t.then(e,e)),n.state.loading|=4,n.instance=a,pt(a);return}a=t.ownerDocument||t,r=Mf(r),(i=hf.get(i))&&Rf(r,i),a=a.createElement(`link`),pt(a);var o=a;o._p=new Promise(function(e,t){o.onload=e,o.onerror=t}),Fd(a,`link`,r),n.instance=a}e.stylesheets===null&&(e.stylesheets=new Map),e.stylesheets.set(n,t),(t=n.state.preload)&&!(n.state.loading&3)&&(e.count++,n=Jf.bind(e),t.addEventListener(`load`,n),t.addEventListener(`error`,n))}}var Kf=0;function qf(e,t){return e.stylesheets&&e.count===0&&Xf(e,e.stylesheets),0Kf?50:800)+t);return e.unsuspend=n,function(){e.unsuspend=null,clearTimeout(r),clearTimeout(i)}}:null}function Jf(){if(this.count--,this.count===0&&(this.imgCount===0||!this.waitingForImages)){if(this.stylesheets)Xf(this,this.stylesheets);else if(this.unsuspend){var e=this.unsuspend;this.unsuspend=null,e()}}}var Yf=null;function Xf(e,t){e.stylesheets=null,e.unsuspend!==null&&(e.count++,Yf=new Map,t.forEach(tee,e),Yf=null,Jf.call(e))}function tee(e,t){if(!(t.state.loading&4)){var n=Yf.get(e);if(n)var r=n.get(null);else{n=new Map,Yf.set(e,n);for(var i=e.querySelectorAll(`link[data-precedence],style[data-precedence]`),a=0;a{function n(){if(!(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__>`u`||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!=`function`))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(n)}catch(e){console.error(e)}}n(),t.exports=_()})),y=l(f()),b=v(),x=e=>typeof e==`string`,S=()=>{let e,t,n=new Promise((n,r)=>{e=n,t=r});return n.resolve=e,n.reject=t,n},C=e=>e==null?``:``+e,w=(e,t,n)=>{e.forEach(e=>{t[e]&&(n[e]=t[e])})},T=/###/g,E=e=>e&&e.indexOf(`###`)>-1?e.replace(T,`.`):e,D=e=>!e||x(e),O=(e,t,n)=>{let r=x(t)?t.split(`.`):t,i=0;for(;i{let{obj:r,k:i}=O(e,t,Object);if(r!==void 0||t.length===1){r[i]=n;return}let a=t[t.length-1],o=t.slice(0,t.length-1),s=O(e,o,Object);for(;s.obj===void 0&&o.length;)a=`${o[o.length-1]}.${a}`,o=o.slice(0,o.length-1),s=O(e,o,Object),s?.obj&&s.obj[`${s.k}.${a}`]!==void 0&&(s.obj=void 0);s.obj[`${s.k}.${a}`]=n},A=(e,t,n,r)=>{let{obj:i,k:a}=O(e,t,Object);i[a]=i[a]||[],i[a].push(n)},j=(e,t)=>{let{obj:n,k:r}=O(e,t);if(n&&Object.prototype.hasOwnProperty.call(n,r))return n[r]},M=(e,t,n)=>{let r=j(e,n);return r===void 0?j(t,n):r},N=(e,t,n)=>{for(let r in t)r!==`__proto__`&&r!==`constructor`&&(r in e?x(e[r])||e[r]instanceof String||x(t[r])||t[r]instanceof String?n&&(e[r]=t[r]):N(e[r],t[r],n):e[r]=t[r]);return e},P=e=>e.replace(/[\-\[\]\/\{\}\(\)\*\+\?\.\\\^\$\|]/g,`\\$&`),F={"&":`&`,"<":`<`,">":`>`,'"':`"`,"'":`'`,"/":`/`},I=e=>x(e)?e.replace(/[&<>"'\/]/g,e=>F[e]):e,L=class{constructor(e){this.capacity=e,this.regExpMap=new Map,this.regExpQueue=[]}getRegExp(e){let t=this.regExpMap.get(e);if(t!==void 0)return t;let n=new RegExp(e);return this.regExpQueue.length===this.capacity&&this.regExpMap.delete(this.regExpQueue.shift()),this.regExpMap.set(e,n),this.regExpQueue.push(e),n}},R=[` `,`,`,`?`,`!`,`;`],z=new L(20),B=(e,t,n)=>{t||=``,n||=``;let r=R.filter(e=>t.indexOf(e)<0&&n.indexOf(e)<0);if(r.length===0)return!0;let i=z.getRegExp(`(${r.map(e=>e===`?`?`\\?`:e).join(`|`)})`),a=!i.test(e);if(!a){let t=e.indexOf(n);t>0&&!i.test(e.substring(0,t))&&(a=!0)}return a},V=(e,t,n=`.`)=>{if(!e)return;if(e[t])return Object.prototype.hasOwnProperty.call(e,t)?e[t]:void 0;let r=t.split(n),i=e;for(let e=0;e-1&&oe?.replace(`_`,`-`),H={type:`logger`,log(e){this.output(`log`,e)},warn(e){this.output(`warn`,e)},error(e){this.output(`error`,e)},output(e,t){console?.[e]?.apply?.(console,t)}},te=new class e{constructor(e,t={}){this.init(e,t)}init(e,t={}){this.prefix=t.prefix||`i18next:`,this.logger=e||H,this.options=t,this.debug=t.debug}log(...e){return this.forward(e,`log`,``,!0)}warn(...e){return this.forward(e,`warn`,``,!0)}error(...e){return this.forward(e,`error`,``)}deprecate(...e){return this.forward(e,`warn`,`WARNING DEPRECATED: `,!0)}forward(e,t,n,r){return r&&!this.debug?null:(x(e[0])&&(e[0]=`${n}${this.prefix} ${e[0]}`),this.logger[t](e))}create(t){return new e(this.logger,{prefix:`${this.prefix}:${t}:`,...this.options})}clone(t){return t||=this.options,t.prefix=t.prefix||this.prefix,new e(this.logger,t)}},ne=class{constructor(){this.observers={}}on(e,t){return e.split(` `).forEach(e=>{this.observers[e]||(this.observers[e]=new Map);let n=this.observers[e].get(t)||0;this.observers[e].set(t,n+1)}),this}off(e,t){if(this.observers[e]){if(!t){delete this.observers[e];return}this.observers[e].delete(t)}}emit(e,...t){this.observers[e]&&Array.from(this.observers[e].entries()).forEach(([e,n])=>{for(let r=0;r{for(let i=0;i-1&&this.options.ns.splice(t,1)}getResource(e,t,n,r={}){let i=r.keySeparator===void 0?this.options.keySeparator:r.keySeparator,a=r.ignoreJSONStructure===void 0?this.options.ignoreJSONStructure:r.ignoreJSONStructure,o;e.indexOf(`.`)>-1?o=e.split(`.`):(o=[e,t],n&&(Array.isArray(n)?o.push(...n):x(n)&&i?o.push(...n.split(i)):o.push(n)));let s=j(this.data,o);return!s&&!t&&!n&&e.indexOf(`.`)>-1&&(e=o[0],t=o[1],n=o.slice(2).join(`.`)),s||!a||!x(n)?s:V(this.data?.[e]?.[t],n,i)}addResource(e,t,n,r,i={silent:!1}){let a=i.keySeparator===void 0?this.options.keySeparator:i.keySeparator,o=[e,t];n&&(o=o.concat(a?n.split(a):n)),e.indexOf(`.`)>-1&&(o=e.split(`.`),r=t,t=o[1]),this.addNamespaces(t),k(this.data,o,r),i.silent||this.emit(`added`,e,t,n,r)}addResources(e,t,n,r={silent:!1}){for(let r in n)(x(n[r])||Array.isArray(n[r]))&&this.addResource(e,t,r,n[r],{silent:!0});r.silent||this.emit(`added`,e,t,n)}addResourceBundle(e,t,n,r,i,a={silent:!1,skipCopy:!1}){let o=[e,t];e.indexOf(`.`)>-1&&(o=e.split(`.`),r=n,n=t,t=o[1]),this.addNamespaces(t);let s=j(this.data,o)||{};a.skipCopy||(n=JSON.parse(JSON.stringify(n))),r?N(s,n,i):s={...s,...n},k(this.data,o,s),a.silent||this.emit(`added`,e,t,n)}removeResourceBundle(e,t){this.hasResourceBundle(e,t)&&delete this.data[e][t],this.removeNamespaces(t),this.emit(`removed`,e,t)}hasResourceBundle(e,t){return this.getResource(e,t)!==void 0}getResourceBundle(e,t){return t||=this.options.defaultNS,this.getResource(e,t)}getDataByLanguage(e){return this.data[e]}hasLanguageSomeTranslations(e){let t=this.getDataByLanguage(e);return!!(t&&Object.keys(t)||[]).find(e=>t[e]&&Object.keys(t[e]).length>0)}toJSON(){return this.data}},U={processors:{},addPostProcessor(e){this.processors[e.name]=e},handle(e,t,n,r,i){return e.forEach(e=>{t=this.processors[e]?.process(t,n,r,i)??t}),t}},ie=Symbol(`i18next/PATH_KEY`);function ae(){let e=[],t=Object.create(null),n;return t.get=(r,i)=>(n?.revoke?.(),i===ie?e:(e.push(i),n=Proxy.revocable(r,t),n.proxy)),Proxy.revocable(Object.create(null),t).proxy}function W(e,t){let{[ie]:n}=e(ae());return n.join(t?.keySeparator??`.`)}var oe={},se=e=>!x(e)&&typeof e!=`boolean`&&typeof e!=`number`,ce=class e extends ne{constructor(e,t={}){super(),w([`resourceStore`,`languageUtils`,`pluralResolver`,`interpolator`,`backendConnector`,`i18nFormat`,`utils`],e,this),this.options=t,this.options.keySeparator===void 0&&(this.options.keySeparator=`.`),this.logger=te.create(`translator`)}changeLanguage(e){e&&(this.language=e)}exists(e,t={interpolation:{}}){let n={...t};if(e==null)return!1;let r=this.resolve(e,n);if(r?.res===void 0)return!1;let i=se(r.res);return!(n.returnObjects===!1&&i)}extractFromKey(e,t){let n=t.nsSeparator===void 0?this.options.nsSeparator:t.nsSeparator;n===void 0&&(n=`:`);let r=t.keySeparator===void 0?this.options.keySeparator:t.keySeparator,i=t.ns||this.options.defaultNS||[],a=n&&e.indexOf(n)>-1,o=!this.options.userDefinedKeySeparator&&!t.keySeparator&&!this.options.userDefinedNsSeparator&&!t.nsSeparator&&!B(e,n,r);if(a&&!o){let t=e.match(this.interpolator.nestingRegexp);if(t&&t.length>0)return{key:e,namespaces:x(i)?[i]:i};let a=e.split(n);(n!==r||n===r&&this.options.ns.indexOf(a[0])>-1)&&(i=a.shift()),e=a.join(r)}return{key:e,namespaces:x(i)?[i]:i}}translate(t,n,r){let i=typeof n==`object`?{...n}:n;if(typeof i!=`object`&&this.options.overloadTranslationOptionHandler&&(i=this.options.overloadTranslationOptionHandler(arguments)),typeof i==`object`&&(i={...i}),i||={},t==null)return``;typeof t==`function`&&(t=W(t,{...this.options,...i})),Array.isArray(t)||(t=[String(t)]);let a=i.returnDetails===void 0?this.options.returnDetails:i.returnDetails,o=i.keySeparator===void 0?this.options.keySeparator:i.keySeparator,{key:s,namespaces:c}=this.extractFromKey(t[t.length-1],i),l=c[c.length-1],u=i.nsSeparator===void 0?this.options.nsSeparator:i.nsSeparator;u===void 0&&(u=`:`);let d=i.lng||this.language,f=i.appendNamespaceToCIMode||this.options.appendNamespaceToCIMode;if(d?.toLowerCase()===`cimode`)return f?a?{res:`${l}${u}${s}`,usedKey:s,exactUsedKey:s,usedLng:d,usedNS:l,usedParams:this.getUsedParamsDetails(i)}:`${l}${u}${s}`:a?{res:s,usedKey:s,exactUsedKey:s,usedLng:d,usedNS:l,usedParams:this.getUsedParamsDetails(i)}:s;let p=this.resolve(t,i),m=p?.res,h=p?.usedKey||s,g=p?.exactUsedKey||s,_=[`[object Number]`,`[object Function]`,`[object RegExp]`],v=i.joinArrays===void 0?this.options.joinArrays:i.joinArrays,y=!this.i18nFormat||this.i18nFormat.handleAsObject,b=i.count!==void 0&&!x(i.count),S=e.hasDefaultValue(i),C=b?this.pluralResolver.getSuffix(d,i.count,i):``,w=i.ordinal&&b?this.pluralResolver.getSuffix(d,i.count,{ordinal:!1}):``,T=b&&!i.ordinal&&i.count===0,E=T&&i[`defaultValue${this.options.pluralSeparator}zero`]||i[`defaultValue${C}`]||i[`defaultValue${w}`]||i.defaultValue,D=m;y&&!m&&S&&(D=E);let O=se(D),k=Object.prototype.toString.apply(D);if(y&&D&&O&&_.indexOf(k)<0&&!(x(v)&&Array.isArray(D))){if(!i.returnObjects&&!this.options.returnObjects){this.options.returnedObjectHandler||this.logger.warn(`accessing an object - but returnObjects options is not enabled!`);let e=this.options.returnedObjectHandler?this.options.returnedObjectHandler(h,D,{...i,ns:c}):`key '${s} (${this.language})' returned an object instead of string.`;return a?(p.res=e,p.usedParams=this.getUsedParamsDetails(i),p):e}if(o){let e=Array.isArray(D),t=e?[]:{},n=e?g:h;for(let e in D)if(Object.prototype.hasOwnProperty.call(D,e)){let r=`${n}${o}${e}`;S&&!m?t[e]=this.translate(r,{...i,defaultValue:se(E)?E[e]:void 0,joinArrays:!1,ns:c}):t[e]=this.translate(r,{...i,joinArrays:!1,ns:c}),t[e]===r&&(t[e]=D[e])}m=t}}else if(y&&x(v)&&Array.isArray(m))m=m.join(v),m&&=this.extendTranslation(m,t,i,r);else{let e=!1,n=!1;!this.isValidLookup(m)&&S&&(e=!0,m=E),this.isValidLookup(m)||(n=!0,m=s);let a=(i.missingKeyNoValueFallbackToKey||this.options.missingKeyNoValueFallbackToKey)&&n?void 0:m,c=S&&E!==m&&this.options.updateMissing;if(n||e||c){if(this.logger.log(c?`updateKey`:`missingKey`,d,l,s,c?E:m),o){let e=this.resolve(s,{...i,keySeparator:!1});e&&e.res&&this.logger.warn(`Seems the loaded translations were in flat JSON format instead of nested. Either set keySeparator: false on init or make sure your translations are published in nested format.`)}let e=[],t=this.languageUtils.getFallbackCodes(this.options.fallbackLng,i.lng||this.language);if(this.options.saveMissingTo===`fallback`&&t&&t[0])for(let n=0;n{let r=S&&n!==m?n:a;this.options.missingKeyHandler?this.options.missingKeyHandler(e,l,t,r,c,i):this.backendConnector?.saveMissing&&this.backendConnector.saveMissing(e,l,t,r,c,i),this.emit(`missingKey`,e,l,t,m)};this.options.saveMissing&&(this.options.saveMissingPlurals&&b?e.forEach(e=>{let t=this.pluralResolver.getSuffixes(e,i);T&&i[`defaultValue${this.options.pluralSeparator}zero`]&&t.indexOf(`${this.options.pluralSeparator}zero`)<0&&t.push(`${this.options.pluralSeparator}zero`),t.forEach(t=>{n([e],s+t,i[`defaultValue${t}`]||E)})}):n(e,s,E))}m=this.extendTranslation(m,t,i,p,r),n&&m===s&&this.options.appendNamespaceToMissingKey&&(m=`${l}${u}${s}`),(n||e)&&this.options.parseMissingKeyHandler&&(m=this.options.parseMissingKeyHandler(this.options.appendNamespaceToMissingKey?`${l}${u}${s}`:s,e?m:void 0,i))}return a?(p.res=m,p.usedParams=this.getUsedParamsDetails(i),p):m}extendTranslation(e,t,n,r,i){if(this.i18nFormat?.parse)e=this.i18nFormat.parse(e,{...this.options.interpolation.defaultVariables,...n},n.lng||this.language||r.usedLng,r.usedNS,r.usedKey,{resolved:r});else if(!n.skipInterpolation){n.interpolation&&this.interpolator.init({...n,interpolation:{...this.options.interpolation,...n.interpolation}});let a=x(e)&&(n?.interpolation?.skipOnVariables===void 0?this.options.interpolation.skipOnVariables:n.interpolation.skipOnVariables),o;if(a){let t=e.match(this.interpolator.nestingRegexp);o=t&&t.length}let s=n.replace&&!x(n.replace)?n.replace:n;if(this.options.interpolation.defaultVariables&&(s={...this.options.interpolation.defaultVariables,...s}),e=this.interpolator.interpolate(e,s,n.lng||this.language||r.usedLng,n),a){let t=e.match(this.interpolator.nestingRegexp),r=t&&t.length;oi?.[0]===e[0]&&!n.context?(this.logger.warn(`It seems you are nesting recursively key: ${e[0]} in key: ${t[0]}`),null):this.translate(...e,t),n)),n.interpolation&&this.interpolator.reset()}let a=n.postProcess||this.options.postProcess,o=x(a)?[a]:a;return e!=null&&o?.length&&n.applyPostProcessor!==!1&&(e=U.handle(o,e,t,this.options&&this.options.postProcessPassResolved?{i18nResolved:{...r,usedParams:this.getUsedParamsDetails(n)},...n}:n,this)),e}resolve(e,t={}){let n,r,i,a,o;return x(e)&&(e=[e]),e.forEach(e=>{if(this.isValidLookup(n))return;let s=this.extractFromKey(e,t),c=s.key;r=c;let l=s.namespaces;this.options.fallbackNS&&(l=l.concat(this.options.fallbackNS));let u=t.count!==void 0&&!x(t.count),d=u&&!t.ordinal&&t.count===0,f=t.context!==void 0&&(x(t.context)||typeof t.context==`number`)&&t.context!==``,p=t.lngs?t.lngs:this.languageUtils.toResolveHierarchy(t.lng||this.language,t.fallbackLng);l.forEach(e=>{this.isValidLookup(n)||(o=e,!oe[`${p[0]}-${e}`]&&this.utils?.hasLoadedNamespace&&!this.utils?.hasLoadedNamespace(o)&&(oe[`${p[0]}-${e}`]=!0,this.logger.warn(`key "${r}" for languages "${p.join(`, `)}" won't get resolved as namespace "${o}" was not yet loaded`,`This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!`)),p.forEach(r=>{if(this.isValidLookup(n))return;a=r;let o=[c];if(this.i18nFormat?.addLookupKeys)this.i18nFormat.addLookupKeys(o,c,r,e,t);else{let e;u&&(e=this.pluralResolver.getSuffix(r,t.count,t));let n=`${this.options.pluralSeparator}zero`,i=`${this.options.pluralSeparator}ordinal${this.options.pluralSeparator}`;if(u&&(t.ordinal&&e.indexOf(i)===0&&o.push(c+e.replace(i,this.options.pluralSeparator)),o.push(c+e),d&&o.push(c+n)),f){let r=`${c}${this.options.contextSeparator||`_`}${t.context}`;o.push(r),u&&(t.ordinal&&e.indexOf(i)===0&&o.push(r+e.replace(i,this.options.pluralSeparator)),o.push(r+e),d&&o.push(r+n))}}let s;for(;s=o.pop();)this.isValidLookup(n)||(i=s,n=this.getResource(r,e,s,t))}))})}),{res:n,usedKey:r,exactUsedKey:i,usedLng:a,usedNS:o}}isValidLookup(e){return e!==void 0&&!(!this.options.returnNull&&e===null)&&!(!this.options.returnEmptyString&&e===``)}getResource(e,t,n,r={}){return this.i18nFormat?.getResource?this.i18nFormat.getResource(e,t,n,r):this.resourceStore.getResource(e,t,n,r)}getUsedParamsDetails(e={}){let t=[`defaultValue`,`ordinal`,`context`,`replace`,`lng`,`lngs`,`fallbackLng`,`ns`,`keySeparator`,`nsSeparator`,`returnObjects`,`returnDetails`,`joinArrays`,`postProcess`,`interpolation`],n=e.replace&&!x(e.replace),r=n?e.replace:e;if(n&&e.count!==void 0&&(r.count=e.count),this.options.interpolation.defaultVariables&&(r={...this.options.interpolation.defaultVariables,...r}),!n){r={...r};for(let e of t)delete r[e]}return r}static hasDefaultValue(e){for(let t in e)if(Object.prototype.hasOwnProperty.call(e,t)&&t.substring(0,12)===`defaultValue`&&e[t]!==void 0)return!0;return!1}},le=class{constructor(e){this.options=e,this.supportedLngs=this.options.supportedLngs||!1,this.logger=te.create(`languageUtils`)}getScriptPartFromCode(e){if(e=ee(e),!e||e.indexOf(`-`)<0)return null;let t=e.split(`-`);return t.length===2||(t.pop(),t[t.length-1].toLowerCase()===`x`)?null:this.formatLanguageCode(t.join(`-`))}getLanguagePartFromCode(e){if(e=ee(e),!e||e.indexOf(`-`)<0)return e;let t=e.split(`-`);return this.formatLanguageCode(t[0])}formatLanguageCode(e){if(x(e)&&e.indexOf(`-`)>-1){let t;try{t=Intl.getCanonicalLocales(e)[0]}catch{}return t&&this.options.lowerCaseLng&&(t=t.toLowerCase()),t||(this.options.lowerCaseLng?e.toLowerCase():e)}return this.options.cleanCode||this.options.lowerCaseLng?e.toLowerCase():e}isSupportedCode(e){return(this.options.load===`languageOnly`||this.options.nonExplicitSupportedLngs)&&(e=this.getLanguagePartFromCode(e)),!this.supportedLngs||!this.supportedLngs.length||this.supportedLngs.indexOf(e)>-1}getBestMatchFromCodes(e){if(!e)return null;let t;return e.forEach(e=>{if(t)return;let n=this.formatLanguageCode(e);(!this.options.supportedLngs||this.isSupportedCode(n))&&(t=n)}),!t&&this.options.supportedLngs&&e.forEach(e=>{if(t)return;let n=this.getScriptPartFromCode(e);if(this.isSupportedCode(n))return t=n;let r=this.getLanguagePartFromCode(e);if(this.isSupportedCode(r))return t=r;t=this.options.supportedLngs.find(e=>{if(e===r||!(e.indexOf(`-`)<0&&r.indexOf(`-`)<0)&&(e.indexOf(`-`)>0&&r.indexOf(`-`)<0&&e.substring(0,e.indexOf(`-`))===r||e.indexOf(r)===0&&r.length>1))return e})}),t||=this.getFallbackCodes(this.options.fallbackLng)[0],t}getFallbackCodes(e,t){if(!e)return[];if(typeof e==`function`&&(e=e(t)),x(e)&&(e=[e]),Array.isArray(e))return e;if(!t)return e.default||[];let n=e[t];return n||=e[this.getScriptPartFromCode(t)],n||=e[this.formatLanguageCode(t)],n||=e[this.getLanguagePartFromCode(t)],n||=e.default,n||[]}toResolveHierarchy(e,t){let n=this.getFallbackCodes((t===!1?[]:t)||this.options.fallbackLng||[],e),r=[],i=e=>{e&&(this.isSupportedCode(e)?r.push(e):this.logger.warn(`rejecting language code not found in supportedLngs: ${e}`))};return x(e)&&(e.indexOf(`-`)>-1||e.indexOf(`_`)>-1)?(this.options.load!==`languageOnly`&&i(this.formatLanguageCode(e)),this.options.load!==`languageOnly`&&this.options.load!==`currentOnly`&&i(this.getScriptPartFromCode(e)),this.options.load!==`currentOnly`&&i(this.getLanguagePartFromCode(e))):x(e)&&i(this.formatLanguageCode(e)),n.forEach(e=>{r.indexOf(e)<0&&i(this.formatLanguageCode(e))}),r}},ue={zero:0,one:1,two:2,few:3,many:4,other:5},de={select:e=>e===1?`one`:`other`,resolvedOptions:()=>({pluralCategories:[`one`,`other`]})},fe=class{constructor(e,t={}){this.languageUtils=e,this.options=t,this.logger=te.create(`pluralResolver`),this.pluralRulesCache={}}addRule(e,t){this.rules[e]=t}clearCache(){this.pluralRulesCache={}}getRule(e,t={}){let n=ee(e===`dev`?`en`:e),r=t.ordinal?`ordinal`:`cardinal`,i=JSON.stringify({cleanedCode:n,type:r});if(i in this.pluralRulesCache)return this.pluralRulesCache[i];let a;try{a=new Intl.PluralRules(n,{type:r})}catch{if(!Intl)return this.logger.error(`No Intl support, please use an Intl polyfill!`),de;if(!e.match(/-|_/))return de;let n=this.languageUtils.getLanguagePartFromCode(e);a=this.getRule(n,t)}return this.pluralRulesCache[i]=a,a}needsPlural(e,t={}){let n=this.getRule(e,t);return n||=this.getRule(`dev`,t),n?.resolvedOptions().pluralCategories.length>1}getPluralFormsOfKey(e,t,n={}){return this.getSuffixes(e,n).map(e=>`${t}${e}`)}getSuffixes(e,t={}){let n=this.getRule(e,t);return n||=this.getRule(`dev`,t),n?n.resolvedOptions().pluralCategories.sort((e,t)=>ue[e]-ue[t]).map(e=>`${this.options.prepend}${t.ordinal?`ordinal${this.options.prepend}`:``}${e}`):[]}getSuffix(e,t,n={}){let r=this.getRule(e,n);return r?`${this.options.prepend}${n.ordinal?`ordinal${this.options.prepend}`:``}${r.select(t)}`:(this.logger.warn(`no plural rule found for: ${e}`),this.getSuffix(`dev`,t,n))}},pe=(e,t,n,r=`.`,i=!0)=>{let a=M(e,t,n);return!a&&i&&x(n)&&(a=V(e,n,r),a===void 0&&(a=V(t,n,r))),a},me=e=>e.replace(/\$/g,`$$$$`),he=class{constructor(e={}){this.logger=te.create(`interpolator`),this.options=e,this.format=e?.interpolation?.format||(e=>e),this.init(e)}init(e={}){e.interpolation||={escapeValue:!0};let{escape:t,escapeValue:n,useRawValueToEscape:r,prefix:i,prefixEscaped:a,suffix:o,suffixEscaped:s,formatSeparator:c,unescapeSuffix:l,unescapePrefix:u,nestingPrefix:d,nestingPrefixEscaped:f,nestingSuffix:p,nestingSuffixEscaped:m,nestingOptionsSeparator:h,maxReplaces:g,alwaysFormat:_}=e.interpolation;this.escape=t===void 0?I:t,this.escapeValue=n===void 0?!0:n,this.useRawValueToEscape=r===void 0?!1:r,this.prefix=i?P(i):a||`{{`,this.suffix=o?P(o):s||`}}`,this.formatSeparator=c||`,`,this.unescapePrefix=l?``:u||`-`,this.unescapeSuffix=this.unescapePrefix?``:l||``,this.nestingPrefix=d?P(d):f||P(`$t(`),this.nestingSuffix=p?P(p):m||P(`)`),this.nestingOptionsSeparator=h||`,`,this.maxReplaces=g||1e3,this.alwaysFormat=_===void 0?!1:_,this.resetRegExp()}reset(){this.options&&this.init(this.options)}resetRegExp(){let e=(e,t)=>e?.source===t?(e.lastIndex=0,e):new RegExp(t,`g`);this.regexp=e(this.regexp,`${this.prefix}(.+?)${this.suffix}`),this.regexpUnescape=e(this.regexpUnescape,`${this.prefix}${this.unescapePrefix}(.+?)${this.unescapeSuffix}${this.suffix}`),this.nestingRegexp=e(this.nestingRegexp,`${this.nestingPrefix}((?:[^()"']+|"[^"]*"|'[^']*'|\\((?:[^()]|"[^"]*"|'[^']*')*\\))*?)${this.nestingSuffix}`)}interpolate(e,t,n,r){let i,a,o,s=this.options&&this.options.interpolation&&this.options.interpolation.defaultVariables||{},c=e=>{if(e.indexOf(this.formatSeparator)<0){let i=pe(t,s,e,this.options.keySeparator,this.options.ignoreJSONStructure);return this.alwaysFormat?this.format(i,void 0,n,{...r,...t,interpolationkey:e}):i}let i=e.split(this.formatSeparator),a=i.shift().trim(),o=i.join(this.formatSeparator).trim();return this.format(pe(t,s,a,this.options.keySeparator,this.options.ignoreJSONStructure),o,n,{...r,...t,interpolationkey:a})};this.resetRegExp();let l=r?.missingInterpolationHandler||this.options.missingInterpolationHandler,u=r?.interpolation?.skipOnVariables===void 0?this.options.interpolation.skipOnVariables:r.interpolation.skipOnVariables;return[{regex:this.regexpUnescape,safeValue:e=>me(e)},{regex:this.regexp,safeValue:e=>this.escapeValue?me(this.escape(e)):me(e)}].forEach(t=>{for(o=0;i=t.regex.exec(e);){let n=i[1].trim();if(a=c(n),a===void 0)if(typeof l==`function`){let t=l(e,i,r);a=x(t)?t:``}else if(r&&Object.prototype.hasOwnProperty.call(r,n))a=``;else if(u){a=i[0];continue}else this.logger.warn(`missed to pass in variable ${n} for interpolating ${e}`),a=``;else !x(a)&&!this.useRawValueToEscape&&(a=C(a));let s=t.safeValue(a);if(e=e.replace(i[0],s),u?(t.regex.lastIndex+=a.length,t.regex.lastIndex-=i[0].length):t.regex.lastIndex=0,o++,o>=this.maxReplaces)break}}),e}nest(e,t,n={}){let r,i,a,o=(e,t)=>{let n=this.nestingOptionsSeparator;if(e.indexOf(n)<0)return e;let r=e.split(RegExp(`${n}[ ]*{`)),i=`{${r[1]}`;e=r[0],i=this.interpolate(i,a);let o=i.match(/'/g),s=i.match(/"/g);((o?.length??0)%2==0&&!s||s.length%2!=0)&&(i=i.replace(/'/g,`"`));try{a=JSON.parse(i),t&&(a={...t,...a})}catch(t){return this.logger.warn(`failed parsing options string in nesting for key ${e}`,t),`${e}${n}${i}`}return a.defaultValue&&a.defaultValue.indexOf(this.prefix)>-1&&delete a.defaultValue,e};for(;r=this.nestingRegexp.exec(e);){let s=[];a={...n},a=a.replace&&!x(a.replace)?a.replace:a,a.applyPostProcessor=!1,delete a.defaultValue;let c=/{.*}/.test(r[1])?r[1].lastIndexOf(`}`)+1:r[1].indexOf(this.formatSeparator);if(c!==-1&&(s=r[1].slice(c).split(this.formatSeparator).map(e=>e.trim()).filter(Boolean),r[1]=r[1].slice(0,c)),i=t(o.call(this,r[1].trim(),a),a),i&&r[0]===e&&!x(i))return i;x(i)||(i=C(i)),i||=(this.logger.warn(`missed to resolve ${r[1]} for nesting ${e}`),``),s.length&&(i=s.reduce((e,t)=>this.format(e,t,n.lng,{...n,interpolationkey:r[1].trim()}),i.trim())),e=e.replace(r[0],i),this.regexp.lastIndex=0}return e}},ge=e=>{let t=e.toLowerCase().trim(),n={};if(e.indexOf(`(`)>-1){let r=e.split(`(`);t=r[0].toLowerCase().trim();let i=r[1].substring(0,r[1].length-1);t===`currency`&&i.indexOf(`:`)<0?n.currency||=i.trim():t===`relativetime`&&i.indexOf(`:`)<0?n.range||=i.trim():i.split(`;`).forEach(e=>{if(e){let[t,...r]=e.split(`:`),i=r.join(`:`).trim().replace(/^'+|'+$/g,``),a=t.trim();n[a]||(n[a]=i),i===`false`&&(n[a]=!1),i===`true`&&(n[a]=!0),isNaN(i)||(n[a]=parseInt(i,10))}})}return{formatName:t,formatOptions:n}},_e=e=>{let t={};return(n,r,i)=>{let a=i;i&&i.interpolationkey&&i.formatParams&&i.formatParams[i.interpolationkey]&&i[i.interpolationkey]&&(a={...a,[i.interpolationkey]:void 0});let o=r+JSON.stringify(a),s=t[o];return s||(s=e(ee(r),i),t[o]=s),s(n)}},ve=e=>(t,n,r)=>e(ee(n),r)(t),ye=class{constructor(e={}){this.logger=te.create(`formatter`),this.options=e,this.init(e)}init(e,t={interpolation:{}}){this.formatSeparator=t.interpolation.formatSeparator||`,`;let n=t.cacheInBuiltFormats?_e:ve;this.formats={number:n((e,t)=>{let n=new Intl.NumberFormat(e,{...t});return e=>n.format(e)}),currency:n((e,t)=>{let n=new Intl.NumberFormat(e,{...t,style:`currency`});return e=>n.format(e)}),datetime:n((e,t)=>{let n=new Intl.DateTimeFormat(e,{...t});return e=>n.format(e)}),relativetime:n((e,t)=>{let n=new Intl.RelativeTimeFormat(e,{...t});return e=>n.format(e,t.range||`day`)}),list:n((e,t)=>{let n=new Intl.ListFormat(e,{...t});return e=>n.format(e)})}}add(e,t){this.formats[e.toLowerCase().trim()]=t}addCached(e,t){this.formats[e.toLowerCase().trim()]=_e(t)}format(e,t,n,r={}){let i=t.split(this.formatSeparator);if(i.length>1&&i[0].indexOf(`(`)>1&&i[0].indexOf(`)`)<0&&i.find(e=>e.indexOf(`)`)>-1)){let e=i.findIndex(e=>e.indexOf(`)`)>-1);i[0]=[i[0],...i.splice(1,e)].join(this.formatSeparator)}return i.reduce((e,t)=>{let{formatName:i,formatOptions:a}=ge(t);if(this.formats[i]){let t=e;try{let o=r?.formatParams?.[r.interpolationkey]||{},s=o.locale||o.lng||r.locale||r.lng||n;t=this.formats[i](e,s,{...a,...r,...o})}catch(e){this.logger.warn(e)}return t}else this.logger.warn(`there was no format function for ${i}`);return e},e)}},be=(e,t)=>{e.pending[t]!==void 0&&(delete e.pending[t],e.pendingCount--)},xe=class extends ne{constructor(e,t,n,r={}){super(),this.backend=e,this.store=t,this.services=n,this.languageUtils=n.languageUtils,this.options=r,this.logger=te.create(`backendConnector`),this.waitingReads=[],this.maxParallelReads=r.maxParallelReads||10,this.readingCalls=0,this.maxRetries=r.maxRetries>=0?r.maxRetries:5,this.retryTimeout=r.retryTimeout>=1?r.retryTimeout:350,this.state={},this.queue=[],this.backend?.init?.(n,r.backend,r)}queueLoad(e,t,n,r){let i={},a={},o={},s={};return e.forEach(e=>{let r=!0;t.forEach(t=>{let o=`${e}|${t}`;!n.reload&&this.store.hasResourceBundle(e,t)?this.state[o]=2:this.state[o]<0||(this.state[o]===1?a[o]===void 0&&(a[o]=!0):(this.state[o]=1,r=!1,a[o]===void 0&&(a[o]=!0),i[o]===void 0&&(i[o]=!0),s[t]===void 0&&(s[t]=!0)))}),r||(o[e]=!0)}),(Object.keys(i).length||Object.keys(a).length)&&this.queue.push({pending:a,pendingCount:Object.keys(a).length,loaded:{},errors:[],callback:r}),{toLoad:Object.keys(i),pending:Object.keys(a),toLoadLanguages:Object.keys(o),toLoadNamespaces:Object.keys(s)}}loaded(e,t,n){let r=e.split(`|`),i=r[0],a=r[1];t&&this.emit(`failedLoading`,i,a,t),!t&&n&&this.store.addResourceBundle(i,a,n,void 0,void 0,{skipCopy:!0}),this.state[e]=t?-1:2,t&&n&&(this.state[e]=0);let o={};this.queue.forEach(n=>{A(n.loaded,[i],a),be(n,e),t&&n.errors.push(t),n.pendingCount===0&&!n.done&&(Object.keys(n.loaded).forEach(e=>{o[e]||(o[e]={});let t=n.loaded[e];t.length&&t.forEach(t=>{o[e][t]===void 0&&(o[e][t]=!0)})}),n.done=!0,n.errors.length?n.callback(n.errors):n.callback())}),this.emit(`loaded`,o),this.queue=this.queue.filter(e=>!e.done)}read(e,t,n,r=0,i=this.retryTimeout,a){if(!e.length)return a(null,{});if(this.readingCalls>=this.maxParallelReads){this.waitingReads.push({lng:e,ns:t,fcName:n,tried:r,wait:i,callback:a});return}this.readingCalls++;let o=(o,s)=>{if(this.readingCalls--,this.waitingReads.length>0){let e=this.waitingReads.shift();this.read(e.lng,e.ns,e.fcName,e.tried,e.wait,e.callback)}if(o&&s&&r{this.read.call(this,e,t,n,r+1,i*2,a)},i);return}a(o,s)},s=this.backend[n].bind(this.backend);if(s.length===2){try{let n=s(e,t);n&&typeof n.then==`function`?n.then(e=>o(null,e)).catch(o):o(null,n)}catch(e){o(e)}return}return s(e,t,o)}prepareLoading(e,t,n={},r){if(!this.backend)return this.logger.warn(`No backend was added via i18next.use. Will not load resources.`),r&&r();x(e)&&(e=this.languageUtils.toResolveHierarchy(e)),x(t)&&(t=[t]);let i=this.queueLoad(e,t,n,r);if(!i.toLoad.length)return i.pending.length||r(),null;i.toLoad.forEach(e=>{this.loadOne(e)})}load(e,t,n){this.prepareLoading(e,t,{},n)}reload(e,t,n){this.prepareLoading(e,t,{reload:!0},n)}loadOne(e,t=``){let n=e.split(`|`),r=n[0],i=n[1];this.read(r,i,`read`,void 0,void 0,(n,a)=>{n&&this.logger.warn(`${t}loading namespace ${i} for language ${r} failed`,n),!n&&a&&this.logger.log(`${t}loaded namespace ${i} for language ${r}`,a),this.loaded(e,n,a)})}saveMissing(e,t,n,r,i,a={},o=()=>{}){if(this.services?.utils?.hasLoadedNamespace&&!this.services?.utils?.hasLoadedNamespace(t)){this.logger.warn(`did not save key "${n}" as the namespace "${t}" was not yet loaded`,`This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!`);return}if(!(n==null||n===``)){if(this.backend?.create){let s={...a,isUpdate:i},c=this.backend.create.bind(this.backend);if(c.length<6)try{let i;i=c.length===5?c(e,t,n,r,s):c(e,t,n,r),i&&typeof i.then==`function`?i.then(e=>o(null,e)).catch(o):o(null,i)}catch(e){o(e)}else c(e,t,n,r,o,s)}!e||!e[0]||this.store.addResource(e[0],t,n,r)}}},Se=()=>({debug:!1,initAsync:!0,ns:[`translation`],defaultNS:[`translation`],fallbackLng:[`dev`],fallbackNS:!1,supportedLngs:!1,nonExplicitSupportedLngs:!1,load:`all`,preload:!1,simplifyPluralSuffix:!0,keySeparator:`.`,nsSeparator:`:`,pluralSeparator:`_`,contextSeparator:`_`,partialBundledLanguages:!1,saveMissing:!1,updateMissing:!1,saveMissingTo:`fallback`,saveMissingPlurals:!0,missingKeyHandler:!1,missingInterpolationHandler:!1,postProcess:!1,postProcessPassResolved:!1,returnNull:!1,returnEmptyString:!0,returnObjects:!1,joinArrays:!1,returnedObjectHandler:!1,parseMissingKeyHandler:!1,appendNamespaceToMissingKey:!1,appendNamespaceToCIMode:!1,overloadTranslationOptionHandler:e=>{let t={};if(typeof e[1]==`object`&&(t=e[1]),x(e[1])&&(t.defaultValue=e[1]),x(e[2])&&(t.tDescription=e[2]),typeof e[2]==`object`||typeof e[3]==`object`){let n=e[3]||e[2];Object.keys(n).forEach(e=>{t[e]=n[e]})}return t},interpolation:{escapeValue:!0,format:e=>e,prefix:`{{`,suffix:`}}`,formatSeparator:`,`,unescapePrefix:`-`,nestingPrefix:`$t(`,nestingSuffix:`)`,nestingOptionsSeparator:`,`,maxReplaces:1e3,skipOnVariables:!0},cacheInBuiltFormats:!0}),Ce=e=>(x(e.ns)&&(e.ns=[e.ns]),x(e.fallbackLng)&&(e.fallbackLng=[e.fallbackLng]),x(e.fallbackNS)&&(e.fallbackNS=[e.fallbackNS]),e.supportedLngs?.indexOf?.(`cimode`)<0&&(e.supportedLngs=e.supportedLngs.concat([`cimode`])),typeof e.initImmediate==`boolean`&&(e.initAsync=e.initImmediate),e),we=()=>{},Te=e=>{Object.getOwnPropertyNames(Object.getPrototypeOf(e)).forEach(t=>{typeof e[t]==`function`&&(e[t]=e[t].bind(e))})},Ee=class e extends ne{constructor(e={},t){if(super(),this.options=Ce(e),this.services={},this.logger=te,this.modules={external:[]},Te(this),t&&!this.isInitialized&&!e.isClone){if(!this.options.initAsync)return this.init(e,t),this;setTimeout(()=>{this.init(e,t)},0)}}init(e={},t){this.isInitializing=!0,typeof e==`function`&&(t=e,e={}),e.defaultNS==null&&e.ns&&(x(e.ns)?e.defaultNS=e.ns:e.ns.indexOf(`translation`)<0&&(e.defaultNS=e.ns[0]));let n=Se();this.options={...n,...this.options,...Ce(e)},this.options.interpolation={...n.interpolation,...this.options.interpolation},e.keySeparator!==void 0&&(this.options.userDefinedKeySeparator=e.keySeparator),e.nsSeparator!==void 0&&(this.options.userDefinedNsSeparator=e.nsSeparator);let r=e=>e?typeof e==`function`?new e:e:null;if(!this.options.isClone){this.modules.logger?te.init(r(this.modules.logger),this.options):te.init(null,this.options);let e;e=this.modules.formatter?this.modules.formatter:ye;let t=new le(this.options);this.store=new re(this.options.resources,this.options);let i=this.services;i.logger=te,i.resourceStore=this.store,i.languageUtils=t,i.pluralResolver=new fe(t,{prepend:this.options.pluralSeparator,simplifyPluralSuffix:this.options.simplifyPluralSuffix}),this.options.interpolation.format&&this.options.interpolation.format!==n.interpolation.format&&this.logger.deprecate(`init: you are still using the legacy format function, please use the new approach: https://www.i18next.com/translation-function/formatting`),e&&(!this.options.interpolation.format||this.options.interpolation.format===n.interpolation.format)&&(i.formatter=r(e),i.formatter.init&&i.formatter.init(i,this.options),this.options.interpolation.format=i.formatter.format.bind(i.formatter)),i.interpolator=new he(this.options),i.utils={hasLoadedNamespace:this.hasLoadedNamespace.bind(this)},i.backendConnector=new xe(r(this.modules.backend),i.resourceStore,i,this.options),i.backendConnector.on(`*`,(e,...t)=>{this.emit(e,...t)}),this.modules.languageDetector&&(i.languageDetector=r(this.modules.languageDetector),i.languageDetector.init&&i.languageDetector.init(i,this.options.detection,this.options)),this.modules.i18nFormat&&(i.i18nFormat=r(this.modules.i18nFormat),i.i18nFormat.init&&i.i18nFormat.init(this)),this.translator=new ce(this.services,this.options),this.translator.on(`*`,(e,...t)=>{this.emit(e,...t)}),this.modules.external.forEach(e=>{e.init&&e.init(this)})}if(this.format=this.options.interpolation.format,t||=we,this.options.fallbackLng&&!this.services.languageDetector&&!this.options.lng){let e=this.services.languageUtils.getFallbackCodes(this.options.fallbackLng);e.length>0&&e[0]!==`dev`&&(this.options.lng=e[0])}!this.services.languageDetector&&!this.options.lng&&this.logger.warn(`init: no languageDetector is used and no lng is defined`),[`getResource`,`hasResourceBundle`,`getResourceBundle`,`getDataByLanguage`].forEach(e=>{this[e]=(...t)=>this.store[e](...t)}),[`addResource`,`addResources`,`addResourceBundle`,`removeResourceBundle`].forEach(e=>{this[e]=(...t)=>(this.store[e](...t),this)});let i=S(),a=()=>{let e=(e,n)=>{this.isInitializing=!1,this.isInitialized&&!this.initializedStoreOnce&&this.logger.warn(`init: i18next is already initialized. You should call init just once!`),this.isInitialized=!0,this.options.isClone||this.logger.log(`initialized`,this.options),this.emit(`initialized`,this.options),i.resolve(n),t(e,n)};if(this.languages&&!this.isInitialized)return e(null,this.t.bind(this));this.changeLanguage(this.options.lng,e)};return this.options.resources||!this.options.initAsync?a():setTimeout(a,0),i}loadResources(e,t=we){let n=t,r=x(e)?e:this.language;if(typeof e==`function`&&(n=e),!this.options.resources||this.options.partialBundledLanguages){if(r?.toLowerCase()===`cimode`&&(!this.options.preload||this.options.preload.length===0))return n();let e=[],t=t=>{t&&t!==`cimode`&&this.services.languageUtils.toResolveHierarchy(t).forEach(t=>{t!==`cimode`&&e.indexOf(t)<0&&e.push(t)})};r?t(r):this.services.languageUtils.getFallbackCodes(this.options.fallbackLng).forEach(e=>t(e)),this.options.preload?.forEach?.(e=>t(e)),this.services.backendConnector.load(e,this.options.ns,e=>{!e&&!this.resolvedLanguage&&this.language&&this.setResolvedLanguage(this.language),n(e)})}else n(null)}reloadResources(e,t,n){let r=S();return typeof e==`function`&&(n=e,e=void 0),typeof t==`function`&&(n=t,t=void 0),e||=this.languages,t||=this.options.ns,n||=we,this.services.backendConnector.reload(e,t,e=>{r.resolve(),n(e)}),r}use(e){if(!e)throw Error(`You are passing an undefined module! Please check the object you are passing to i18next.use()`);if(!e.type)throw Error(`You are passing a wrong module! Please check the object you are passing to i18next.use()`);return e.type===`backend`&&(this.modules.backend=e),(e.type===`logger`||e.log&&e.warn&&e.error)&&(this.modules.logger=e),e.type===`languageDetector`&&(this.modules.languageDetector=e),e.type===`i18nFormat`&&(this.modules.i18nFormat=e),e.type===`postProcessor`&&U.addPostProcessor(e),e.type===`formatter`&&(this.modules.formatter=e),e.type===`3rdParty`&&this.modules.external.push(e),this}setResolvedLanguage(e){if(!(!e||!this.languages)&&!([`cimode`,`dev`].indexOf(e)>-1)){for(let e=0;e-1)&&this.store.hasLanguageSomeTranslations(t)){this.resolvedLanguage=t;break}}!this.resolvedLanguage&&this.languages.indexOf(e)<0&&this.store.hasLanguageSomeTranslations(e)&&(this.resolvedLanguage=e,this.languages.unshift(e))}}changeLanguage(e,t){this.isLanguageChangingTo=e;let n=S();this.emit(`languageChanging`,e);let r=e=>{this.language=e,this.languages=this.services.languageUtils.toResolveHierarchy(e),this.resolvedLanguage=void 0,this.setResolvedLanguage(e)},i=(i,a)=>{a?this.isLanguageChangingTo===e&&(r(a),this.translator.changeLanguage(a),this.isLanguageChangingTo=void 0,this.emit(`languageChanged`,a),this.logger.log(`languageChanged`,a)):this.isLanguageChangingTo=void 0,n.resolve((...e)=>this.t(...e)),t&&t(i,(...e)=>this.t(...e))},a=t=>{!e&&!t&&this.services.languageDetector&&(t=[]);let n=x(t)?t:t&&t[0],a=this.store.hasLanguageSomeTranslations(n)?n:this.services.languageUtils.getBestMatchFromCodes(x(t)?[t]:t);a&&(this.language||r(a),this.translator.language||this.translator.changeLanguage(a),this.services.languageDetector?.cacheUserLanguage?.(a)),this.loadResources(a,e=>{i(e,a)})};return!e&&this.services.languageDetector&&!this.services.languageDetector.async?a(this.services.languageDetector.detect()):!e&&this.services.languageDetector&&this.services.languageDetector.async?this.services.languageDetector.detect.length===0?this.services.languageDetector.detect().then(a):this.services.languageDetector.detect(a):a(e),n}getFixedT(e,t,n){let r=(e,t,...i)=>{let a;a=typeof t==`object`?{...t}:this.options.overloadTranslationOptionHandler([e,t].concat(i)),a.lng=a.lng||r.lng,a.lngs=a.lngs||r.lngs,a.ns=a.ns||r.ns,a.keyPrefix!==``&&(a.keyPrefix=a.keyPrefix||n||r.keyPrefix);let o=this.options.keySeparator||`.`,s;return a.keyPrefix&&Array.isArray(e)?s=e.map(e=>(typeof e==`function`&&(e=W(e,{...this.options,...t})),`${a.keyPrefix}${o}${e}`)):(typeof e==`function`&&(e=W(e,{...this.options,...t})),s=a.keyPrefix?`${a.keyPrefix}${o}${e}`:e),this.t(s,a)};return x(e)?r.lng=e:r.lngs=e,r.ns=t,r.keyPrefix=n,r}t(...e){return this.translator?.translate(...e)}exists(...e){return this.translator?.exists(...e)}setDefaultNamespace(e){this.options.defaultNS=e}hasLoadedNamespace(e,t={}){if(!this.isInitialized)return this.logger.warn(`hasLoadedNamespace: i18next was not initialized`,this.languages),!1;if(!this.languages||!this.languages.length)return this.logger.warn(`hasLoadedNamespace: i18n.languages were undefined or empty`,this.languages),!1;let n=t.lng||this.resolvedLanguage||this.languages[0],r=this.options?this.options.fallbackLng:!1,i=this.languages[this.languages.length-1];if(n.toLowerCase()===`cimode`)return!0;let a=(e,t)=>{let n=this.services.backendConnector.state[`${e}|${t}`];return n===-1||n===0||n===2};if(t.precheck){let e=t.precheck(this,a);if(e!==void 0)return e}return!!(this.hasResourceBundle(n,e)||!this.services.backendConnector.backend||this.options.resources&&!this.options.partialBundledLanguages||a(n,e)&&(!r||a(i,e)))}loadNamespaces(e,t){let n=S();return this.options.ns?(x(e)&&(e=[e]),e.forEach(e=>{this.options.ns.indexOf(e)<0&&this.options.ns.push(e)}),this.loadResources(e=>{n.resolve(),t&&t(e)}),n):(t&&t(),Promise.resolve())}loadLanguages(e,t){let n=S();x(e)&&(e=[e]);let r=this.options.preload||[],i=e.filter(e=>r.indexOf(e)<0&&this.services.languageUtils.isSupportedCode(e));return i.length?(this.options.preload=r.concat(i),this.loadResources(e=>{n.resolve(),t&&t(e)}),n):(t&&t(),Promise.resolve())}dir(e){if(e||=this.resolvedLanguage||(this.languages?.length>0?this.languages[0]:this.language),!e)return`rtl`;try{let t=new Intl.Locale(e);if(t&&t.getTextInfo){let e=t.getTextInfo();if(e&&e.direction)return e.direction}}catch{}let t=`ar.shu.sqr.ssh.xaa.yhd.yud.aao.abh.abv.acm.acq.acw.acx.acy.adf.ads.aeb.aec.afb.ajp.apc.apd.arb.arq.ars.ary.arz.auz.avl.ayh.ayl.ayn.ayp.bbz.pga.he.iw.ps.pbt.pbu.pst.prp.prd.ug.ur.ydd.yds.yih.ji.yi.hbo.men.xmn.fa.jpr.peo.pes.prs.dv.sam.ckb`.split(`.`),n=this.services?.languageUtils||new le(Se());return e.toLowerCase().indexOf(`-latn`)>1?`ltr`:t.indexOf(n.getLanguagePartFromCode(e))>-1||e.toLowerCase().indexOf(`-arab`)>1?`rtl`:`ltr`}static createInstance(t={},n){let r=new e(t,n);return r.createInstance=e.createInstance,r}cloneInstance(t={},n=we){let r=t.forkResourceStore;r&&delete t.forkResourceStore;let i={...this.options,...t,isClone:!0},a=new e(i);return(t.debug!==void 0||t.prefix!==void 0)&&(a.logger=a.logger.clone(t)),[`store`,`services`,`language`].forEach(e=>{a[e]=this[e]}),a.services={...this.services},a.services.utils={hasLoadedNamespace:a.hasLoadedNamespace.bind(a)},r&&(a.store=new re(Object.keys(this.store.data).reduce((e,t)=>(e[t]={...this.store.data[t]},e[t]=Object.keys(e[t]).reduce((n,r)=>(n[r]={...e[t][r]},n),e[t]),e),{}),i),a.services.resourceStore=a.store),a.translator=new ce(a.services,i),a.translator.on(`*`,(e,...t)=>{a.emit(e,...t)}),a.init(i,n),a.translator.options=i,a.translator.backendConnector.services.utils={hasLoadedNamespace:a.hasLoadedNamespace.bind(a)},a}toJSON(){return{options:this.options,store:this.store,language:this.language,languages:this.languages,resolvedLanguage:this.resolvedLanguage}}}.createInstance();Ee.createInstance,Ee.dir,Ee.init,Ee.loadResources,Ee.reloadResources,Ee.use,Ee.changeLanguage,Ee.getFixedT,Ee.t,Ee.exists,Ee.setDefaultNamespace,Ee.hasLoadedNamespace,Ee.loadNamespaces,Ee.loadLanguages;var De=(e,t,n,r)=>{let i=[n,{code:t,...r||{}}];if(e?.services?.logger?.forward)return e.services.logger.forward(i,`warn`,`react-i18next::`,!0);Pe(i[0])&&(i[0]=`react-i18next:: ${i[0]}`),e?.services?.logger?.warn?e.services.logger.warn(...i):console?.warn&&console.warn(...i)},Oe={},ke=(e,t,n,r)=>{Pe(n)&&Oe[n]||(Pe(n)&&(Oe[n]=new Date),De(e,t,n,r))},Ae=(e,t)=>()=>{if(e.isInitialized)t();else{let n=()=>{setTimeout(()=>{e.off(`initialized`,n)},0),t()};e.on(`initialized`,n)}},je=(e,t,n)=>{e.loadNamespaces(t,Ae(e,n))},Me=(e,t,n,r)=>{if(Pe(n)&&(n=[n]),e.options.preload&&e.options.preload.indexOf(t)>-1)return je(e,n,r);n.forEach(t=>{e.options.ns.indexOf(t)<0&&e.options.ns.push(t)}),e.loadLanguages(t,Ae(e,r))},Ne=(e,t,n={})=>!t.languages||!t.languages.length?(ke(t,`NO_LANGUAGES`,`i18n.languages were undefined or empty`,{languages:t.languages}),!0):t.hasLoadedNamespace(e,{lng:n.lng,precheck:(t,r)=>{if(n.bindI18n&&n.bindI18n.indexOf(`languageChanging`)>-1&&t.services.backendConnector.backend&&t.isLanguageChangingTo&&!r(t.isLanguageChangingTo,e))return!1}}),Pe=e=>typeof e==`string`,Fe=e=>typeof e==`object`&&!!e,Ie=/&(?:amp|#38|lt|#60|gt|#62|apos|#39|quot|#34|nbsp|#160|copy|#169|reg|#174|hellip|#8230|#x2F|#47);/g,Le={"&":`&`,"&":`&`,"<":`<`,"<":`<`,">":`>`,">":`>`,"'":`'`,"'":`'`,""":`"`,""":`"`," ":` `," ":` `,"©":`©`,"©":`©`,"®":`®`,"®":`®`,"…":`…`,"…":`…`,"/":`/`,"/":`/`},Re=e=>Le[e],ze={bindI18n:`languageChanged`,bindI18nStore:``,transEmptyNodeValue:``,transSupportBasicHtmlNodes:!0,transWrapTextNodes:``,transKeepBasicHtmlNodesFor:[`br`,`strong`,`i`,`p`],useSuspense:!0,unescape:e=>e.replace(Ie,Re),transDefaultProps:void 0},Be=(e={})=>{ze={...ze,...e}},Ve=()=>ze,He,Ue=e=>{He=e},We=()=>He,Ge={type:`3rdParty`,init(e){Be(e.options.react),Ue(e)}},Ke=(0,y.createContext)(),qe=class{constructor(){this.usedNamespaces={}}addUsedNamespaces(e){e.forEach(e=>{this.usedNamespaces[e]||(this.usedNamespaces[e]=!0)})}getUsedNamespaces(){return Object.keys(this.usedNamespaces)}},Je=o((e=>{var t=f();function n(e,t){return e===t&&(e!==0||1/e==1/t)||e!==e&&t!==t}var r=typeof Object.is==`function`?Object.is:n,i=t.useState,a=t.useEffect,o=t.useLayoutEffect,s=t.useDebugValue;function c(e,t){var n=t(),r=i({inst:{value:n,getSnapshot:t}}),c=r[0].inst,u=r[1];return o(function(){c.value=n,c.getSnapshot=t,l(c)&&u({inst:c})},[e,n,t]),a(function(){return l(c)&&u({inst:c}),e(function(){l(c)&&u({inst:c})})},[e]),s(n),n}function l(e){var t=e.getSnapshot;e=e.value;try{var n=t();return!r(e,n)}catch{return!0}}function u(e,t){return t()}var d=typeof window>`u`||window.document===void 0||window.document.createElement===void 0?u:c;e.useSyncExternalStore=t.useSyncExternalStore===void 0?d:t.useSyncExternalStore})),Ye=o(((e,t)=>{t.exports=Je()})),Xe=Ye(),Ze={t:(e,t)=>Pe(t)?t:Fe(t)&&Pe(t.defaultValue)?t.defaultValue:Array.isArray(e)?e[e.length-1]:e,ready:!1},Qe=()=>()=>{},$e=(e,t={})=>{let{i18n:n}=t,{i18n:r,defaultNS:i}=(0,y.useContext)(Ke)||{},a=n||r||We();a&&!a.reportNamespaces&&(a.reportNamespaces=new qe),a||ke(a,`NO_I18NEXT_INSTANCE`,`useTranslation: You will need to pass in an i18next instance by using initReactI18next`);let o=(0,y.useMemo)(()=>({...Ve(),...a?.options?.react,...t}),[a,t]),{useSuspense:s,keyPrefix:c}=o,l=e||i||a?.options?.defaultNS,u=Pe(l)?[l]:l||[`translation`],d=(0,y.useMemo)(()=>u,u);a?.reportNamespaces?.addUsedNamespaces?.(d);let f=(0,y.useRef)(0),p=(0,y.useCallback)(e=>{if(!a)return Qe;let{bindI18n:t,bindI18nStore:n}=o,r=()=>{f.current+=1,e()};return t&&a.on(t,r),n&&a.store.on(n,r),()=>{t&&t.split(` `).forEach(e=>a.off(e,r)),n&&n.split(` `).forEach(e=>a.store.off(e,r))}},[a,o]),m=(0,y.useRef)(),h=(0,y.useCallback)(()=>{if(!a)return Ze;let e=!!(a.isInitialized||a.initializedStoreOnce)&&d.every(e=>Ne(e,a,o)),n=t.lng||a.language,r=f.current,i=m.current;if(i&&i.ready===e&&i.lng===n&&i.keyPrefix===c&&i.revision===r)return i;let s={t:a.getFixedT(n,o.nsMode===`fallback`?d:d[0],c),ready:e,lng:n,keyPrefix:c,revision:r};return m.current=s,s},[a,d,c,o,t.lng]),[g,_]=(0,y.useState)(0),{t:v,ready:b}=(0,Xe.useSyncExternalStore)(p,h,h);(0,y.useEffect)(()=>{if(a&&!b&&!s){let e=()=>_(e=>e+1);t.lng?Me(a,t.lng,d,e):je(a,d,e)}},[a,t.lng,d,b,s,g]);let x=a||{},S=(0,y.useRef)(null),C=(0,y.useRef)(),w=e=>{let t=Object.getOwnPropertyDescriptors(e);t.__original&&delete t.__original;let n=Object.create(Object.getPrototypeOf(e),t);if(!Object.prototype.hasOwnProperty.call(n,`__original`))try{Object.defineProperty(n,"__original",{value:e,writable:!1,enumerable:!1,configurable:!1})}catch{}return n},T=(0,y.useMemo)(()=>{let e=x,t=e?.language,n=e;e&&(S.current&&S.current.__original===e&&C.current===t?n=S.current:(n=w(e),S.current=n,C.current=t));let r=[v,n,b];return r.t=v,r.i18n=n,r.ready=b,r},[v,x,b,x.resolvedLanguage,x.language,x.languages]);if(a&&s&&!b)throw new Promise(e=>{let n=()=>e();t.lng?Me(a,t.lng,d,n):je(a,d,n)});return T},{slice:et,forEach:tt}=[];function nt(e){return tt.call(et.call(arguments,1),t=>{if(t)for(let n in t)e[n]===void 0&&(e[n]=t[n])}),e}function rt(e){return typeof e==`string`?[/<\s*script.*?>/i,/<\s*\/\s*script\s*>/i,/<\s*img.*?on\w+\s*=/i,/<\s*\w+\s*on\w+\s*=.*?>/i,/javascript\s*:/i,/vbscript\s*:/i,/expression\s*\(/i,/eval\s*\(/i,/alert\s*\(/i,/document\.cookie/i,/document\.write\s*\(/i,/window\.location/i,/innerHTML/i].some(t=>t.test(e)):!1}var it=/^[\u0009\u0020-\u007e\u0080-\u00ff]+$/,at=function(e,t){let n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{path:`/`},r=`${e}=${encodeURIComponent(t)}`;if(n.maxAge>0){let e=n.maxAge-0;if(Number.isNaN(e))throw Error(`maxAge should be a Number`);r+=`; Max-Age=${Math.floor(e)}`}if(n.domain){if(!it.test(n.domain))throw TypeError(`option domain is invalid`);r+=`; Domain=${n.domain}`}if(n.path){if(!it.test(n.path))throw TypeError(`option path is invalid`);r+=`; Path=${n.path}`}if(n.expires){if(typeof n.expires.toUTCString!=`function`)throw TypeError(`option expires is invalid`);r+=`; Expires=${n.expires.toUTCString()}`}if(n.httpOnly&&(r+=`; HttpOnly`),n.secure&&(r+=`; Secure`),n.sameSite)switch(typeof n.sameSite==`string`?n.sameSite.toLowerCase():n.sameSite){case!0:r+=`; SameSite=Strict`;break;case`lax`:r+=`; SameSite=Lax`;break;case`strict`:r+=`; SameSite=Strict`;break;case`none`:r+=`; SameSite=None`;break;default:throw TypeError(`option sameSite is invalid`)}return n.partitioned&&(r+=`; Partitioned`),r},ot={create(e,t,n,r){let i=arguments.length>4&&arguments[4]!==void 0?arguments[4]:{path:`/`,sameSite:`strict`};n&&(i.expires=new Date,i.expires.setTime(i.expires.getTime()+n*60*1e3)),r&&(i.domain=r),document.cookie=at(e,t,i)},read(e){let t=`${e}=`,n=document.cookie.split(`;`);for(let e=0;e-1&&(e=window.location.hash.substring(window.location.hash.indexOf(`?`)));let r=e.substring(1).split(`&`);for(let e=0;e0&&r[e].substring(0,i)===t&&(n=r[e].substring(i+1))}}return n}},lt={name:`hash`,lookup(e){let{lookupHash:t,lookupFromHashIndex:n}=e,r;if(typeof window<`u`){let{hash:e}=window.location;if(e&&e.length>2){let i=e.substring(1);if(t){let e=i.split(`&`);for(let n=0;n0&&e[n].substring(0,i)===t&&(r=e[n].substring(i+1))}}if(r)return r;if(!r&&n>-1){let t=e.match(/\/([a-zA-Z-]*)/g);return Array.isArray(t)?t[typeof n==`number`?n:0]?.replace(`/`,``):void 0}}}return r}},ut=null,dt=()=>{if(ut!==null)return ut;try{if(ut=typeof window<`u`&&window.localStorage!==null,!ut)return!1;let e=`i18next.translate.boo`;window.localStorage.setItem(e,`foo`),window.localStorage.removeItem(e)}catch{ut=!1}return ut},ft={name:`localStorage`,lookup(e){let{lookupLocalStorage:t}=e;if(t&&dt())return window.localStorage.getItem(t)||void 0},cacheUserLanguage(e,t){let{lookupLocalStorage:n}=t;n&&dt()&&window.localStorage.setItem(n,e)}},pt=null,mt=()=>{if(pt!==null)return pt;try{if(pt=typeof window<`u`&&window.sessionStorage!==null,!pt)return!1;let e=`i18next.translate.boo`;window.sessionStorage.setItem(e,`foo`),window.sessionStorage.removeItem(e)}catch{pt=!1}return pt},ht={name:`sessionStorage`,lookup(e){let{lookupSessionStorage:t}=e;if(t&&mt())return window.sessionStorage.getItem(t)||void 0},cacheUserLanguage(e,t){let{lookupSessionStorage:n}=t;n&&mt()&&window.sessionStorage.setItem(n,e)}},gt={name:`navigator`,lookup(e){let t=[];if(typeof navigator<`u`){let{languages:e,userLanguage:n,language:r}=navigator;if(e)for(let n=0;n0?t:void 0}},_t={name:`htmlTag`,lookup(e){let{htmlTag:t}=e,n,r=t||(typeof document<`u`?document.documentElement:null);return r&&typeof r.getAttribute==`function`&&(n=r.getAttribute(`lang`)),n}},vt={name:`path`,lookup(e){let{lookupFromPathIndex:t}=e;if(typeof window>`u`)return;let n=window.location.pathname.match(/\/([a-zA-Z-]*)/g);if(Array.isArray(n))return n[typeof t==`number`?t:0]?.replace(`/`,``)}},yt={name:`subdomain`,lookup(e){let{lookupFromSubdomainIndex:t}=e,n=typeof t==`number`?t+1:1,r=typeof window<`u`&&window.location?.hostname?.match(/^(\w{2,5})\.(([a-z0-9-]{1,63}\.[a-z]{2,6})|localhost)/i);if(r)return r[n]}},bt=!1;try{document.cookie,bt=!0}catch{}var xt=[`querystring`,`cookie`,`localStorage`,`sessionStorage`,`navigator`,`htmlTag`];bt||xt.splice(1,1);var St=()=>({order:xt,lookupQuerystring:`lng`,lookupCookie:`i18next`,lookupLocalStorage:`i18nextLng`,lookupSessionStorage:`i18nextLng`,caches:[`localStorage`],excludeCacheFor:[`cimode`],convertDetectedLanguage:e=>e}),Ct=class{constructor(e){let t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{};this.type=`languageDetector`,this.detectors={},this.init(e,t)}init(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{languageUtils:{}},t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{},n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{};this.services=e,this.options=nt(t,this.options||{},St()),typeof this.options.convertDetectedLanguage==`string`&&this.options.convertDetectedLanguage.indexOf(`15897`)>-1&&(this.options.convertDetectedLanguage=e=>e.replace(`-`,`_`)),this.options.lookupFromUrlIndex&&(this.options.lookupFromPathIndex=this.options.lookupFromUrlIndex),this.i18nOptions=n,this.addDetector(st),this.addDetector(ct),this.addDetector(ft),this.addDetector(ht),this.addDetector(gt),this.addDetector(_t),this.addDetector(vt),this.addDetector(yt),this.addDetector(lt)}addDetector(e){return this.detectors[e.name]=e,this}detect(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.order,t=[];return e.forEach(e=>{if(this.detectors[e]){let n=this.detectors[e].lookup(this.options);n&&typeof n==`string`&&(n=[n]),n&&(t=t.concat(n))}}),t=t.filter(e=>e!=null&&!rt(e)).map(e=>this.options.convertDetectedLanguage(e)),this.services&&this.services.languageUtils&&this.services.languageUtils.getBestMatchFromCodes?t:t.length>0?t[0]:null}cacheUserLanguage(e){let t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:this.options.caches;t&&(this.options.excludeCacheFor&&this.options.excludeCacheFor.indexOf(e)>-1||t.forEach(t=>{this.detectors[t]&&this.detectors[t].cacheUserLanguage(e,this.options)}))}};Ct.type=`languageDetector`,Ee.use(Ct).use(Ge).init({resources:{en:{translation:{nav:{printers:`Printers`,archives:`Archives`,queue:`Print Queue`,stats:`Statistics`,profiles:`Profiles`,maintenance:`Maintenance`,projects:`Projects`,inventory:`Filament`,files:`File Manager`,makerworld:`MakerWorld`,notifications:`Notifications`,settings:`Settings`,system:`System`,collapseSidebar:`Collapse sidebar`,expandSidebar:`Expand sidebar`,update:`Update`,updateAvailable:`Update available: v{{version}}`,updateAvailableBanner:`Version {{version}} is available!`,viewUpdate:`View update`,viewOnGithub:`View on GitHub`,keyboardShortcuts:`Keyboard shortcuts (?)`,switchToLight:`Switch to light mode`,switchToDark:`Switch to dark mode`,switchToSystem:`Switch to system mode`,smartSwitches:`Smart Switches`,logout:`Logout`,installApp:`Install app`,installAppSuccess:`Bambuddy was installed`},common:{save:`Save`,saving:`Saving...`,cancel:`Cancel`,delete:`Delete`,edit:`Edit`,add:`Add`,close:`Close`,confirm:`Confirm`,loading:`Loading...`,error:`Error`,errorLoading:`Error loading data`,retry:`Retry`,success:`Success`,warning:`Warning`,enabled:`Enabled`,disabled:`Disabled`,yes:`Yes`,no:`No`,on:`On`,off:`Off`,all:`All`,none:`None`,search:`Search`,filter:`Filter`,sort:`Sort`,refresh:`Refresh`,download:`Download`,upload:`Upload`,uploading:`Uploading...`,uploadFailed:`Upload failed`,actions:`Actions`,status:`Status`,name:`Name`,description:`Description`,date:`Date`,time:`Time`,hours:`hours`,minutes:`minutes`,seconds:`seconds`,days:`days`,enable:`Enable`,disable:`Disable`,permissions:`Permissions`,noPrinters:`No printers configured`,noData:`No data available`,linkNotFound:`Link not found`,required:`Required`,optional:`Optional`,dismiss:`Dismiss`,apply:`Apply`,reset:`Reset`,export:`Export`,import:`Import`,clear:`Clear`,selectAll:`Select All`,deselectAll:`Deselect All`,noChange:`— No change —`,unchanged:`Unchanged`,unassigned:`Unassigned`,unknown:`Unknown`,unknownError:`Unknown error`,today:`Today`,tomorrow:`Tomorrow`,asap:`ASAP`,overdue:`Overdue`,now:`Now`,collapse:`Collapse`,expand:`Expand`,viewArchive:`View archive`,viewInFileManager:`View in File Manager`,addedBy:`Added by {{username}}`,prints:`prints`,more:`+{{count}} more`,ascending:`Ascending`,descending:`Descending`,back:`Back`,copy:`Copy`,copied:`Copied!`,printer:`Printer`,remove:`Remove`,type:`Type`,print:`Print`,rename:`Rename`,move:`Move`,create:`Create`,duplicate:`Duplicate`,left:`Left`,right:`Right`},printers:{title:`Printers`,addPrinter:`Add Printer`,addPreflight:{checking:`Checking connection...`,warning:`Some connection checks failed. This printer may show as offline. Review the checks below, fix what you can, or save anyway.`,back:`Back`,saveAnyway:`Save anyway`},editPrinter:`Edit Printer`,deletePrinter:`Delete Printer`,printerName:`Printer Name`,serialNumber:`Serial Number`,ipAddress:`IP Address / Hostname`,accessCode:`Access Code`,model:`Model`,nozzleCount:`Nozzle Count`,autoArchive:`Auto Archive`,status:{available:`Available`,idle:`Idle`,printing:`Printing`,paused:`Paused`,offline:`Offline`,problem:`Problem`,error:`Error`,finished:`Finished`,unknown:`Unknown`},temperatures:{nozzle:`Nozzle`,bed:`Bed`,chamber:`Chamber`},heaterHistory:{title:`Heater History`,openLabel:`View heater history`,nozzle:`Nozzle`,nozzle2:`Nozzle 2`,bed:`Bed`,chamber:`Chamber`,error:`Failed to load history`,empty:`No data recorded yet`},progress:`{{percent}}% complete`,timeRemaining:`{{time}} remaining`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,maintenanceOk:`Maintenance OK`,maintenanceWarning:`{{count}} warning`,maintenanceWarning_plural:`{{count}} warnings`,maintenanceDue:`{{count}} due`,maintenanceDue_plural:`{{count}} due`,sort:{name:`Name`,status:`Status`,model:`Model`,location:`Location`,eta:`ETA`,ascending:`Sort ascending`,descending:`Sort descending`},cardSize:{small:`Small cards`,medium:`Medium cards`,large:`Large cards`,extraLarge:`Extra large cards`},hideOffline:`Hide offline`,nextAvailable:`Next available`,powerOn:`Power On`,offlinePrintersWithPlugs:`Offline printers with smart plugs`,noPrintersConfigured:`No printers configured yet`,search:`Search printers...`,noSearchResults:`No printers match your search or filters`,filter:{allStatuses:`All statuses`,allLocations:`All locations`},toolbar:{filters:`Filters`,view:`View`,actions:`Actions`},readyToPrint:`Ready to print`,external:`External`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Delete print archives`,noLabel:`No label`,printPreview:`Print preview`,width:`Width`,height:`Height`,noObjectsFound:`No objects found`,objectsLoadedOnPrintStart:`Objects are loaded when a print starts`,willBeSkipped:`Will be skipped`,name:`Name`,serialCannotBeChanged:`Serial number cannot be changed`,locationHelp:`Used to group printers and filter queue jobs`,wifiSignal:{veryWeak:`Very weak`,weak:`Weak`,fair:`Fair`,good:`Good`,excellent:`Excellent`},maintenanceUpToDate:`All maintenance up to date - Click to view`,maintenance:{title:`In Maintenance`,subtitle:`This printer is paused — not connected, not eligible for the queue, not sending notifications.`,pillLabel:`Maintenance`,exitButton:`Exit maintenance`,menuEnter:`Enter maintenance mode`,menuExit:`Exit maintenance mode`,toastEntered:`{{name}} is now in maintenance mode`,toastExited:`{{name}} is back online`,confirmMidPrintTitle:`Enter maintenance mode mid-print?`,confirmMidPrintMessage:`{{name}} is currently printing. Entering maintenance mode will disconnect MQTT and stop progress tracking and completion notifications for this job. Continue?`,editFieldLabel:`Maintenance mode`,editFieldHelp:`When on, this printer is paused from MQTT, queue dispatch and notifications — useful for repair, parallel Bambuddy installs, or temporary suspension.`},chamberLightOn:`Turn on chamber light`,chamberLightOff:`Turn off chamber light`,files:`Files`,browseFiles:`Browse printer files`,autoOffAfterPrint:`Auto power-off after print`,autoOffExecuted:`Auto-off was executed - turn printer on to reset`,hmsErrors:`HMS Errors`,viewHmsErrors:`View {{count}} HMS error(s)`,resume:`Resume`,pause:`Pause`,stop:`Stop`,camera:`Camera`,skipObject:`Skip Object`,reconnect:`Reconnect`,forceRefresh:`Force Refresh`,forceRefreshSuccess:`Refresh requested`,mqttDebug:`MQTT Debug`,printerInformation:`Printer Information`,copyToClipboard:`Copy`,copied:`Copied!`,state:`State`,wifiSignalLabel:`WiFi Signal`,developerMode:`Developer Mode`,enabled:`Enabled`,disabled:`Disabled`,addedOn:`Added`,sdCard:`SD Card`,inserted:`Inserted`,notInserted:`Not inserted`,totalPrintHours:`Print Hours`,activeNozzle:`Active: {{nozzle}} nozzle`,nozzleRack:`Nozzle Rack`,nozzleDocked:`Docked`,nozzleMounted:`Mounted`,nozzleActive:`Active`,nozzleIdle:`Idle`,nozzleDiameter:`Diameter`,nozzleType:`Type`,nozzleStatus:`Status`,nozzleFilament:`Filament`,nozzleWear:`Wear`,nozzleMaxTemp:`Max Temp`,nozzleSerial:`Serial`,nozzleHardenedSteel:`Hardened Steel`,nozzleStainlessSteel:`Stainless Steel`,nozzleTungstenCarbide:`Tungsten Carbide`,nozzleFlow:`Flow`,nozzleHighFlow:`High Flow`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Firmware Update`,firmwareInstructions:`On the printer's touchscreen, go to`,firmwareNav:`Navigate to`,settings:`Settings`,firmware:`Firmware`,discoverPrinters:`Discover Printers`,searching:`Searching...`,manualEntry:`Manual Entry`,addFromCloud:`Add from Cloud`,toast:{printerDeleted:`Printer deleted`,missingSpoolAssignment:`Print started on {{printer}}. Missing spool assignment for: {{slots}}`,printerAdded:`Printer added`,printerUpdated:`Printer updated`,failedToDelete:`Failed to delete printer`,failedToAdd:`Failed to add printer`,connectionFailedNotAdded:`Could not connect to the printer. Verify the IP, serial number, and access code, and confirm LAN-only mode is on. The printer was not added.`,failedToUpdate:`Failed to update printer`,commandSent:`Command sent`,failedToSendCommand:`Failed to send command`,turnedOn:`{{name}} turned on`,failedToPowerOn:`Failed to power on {{name}}`,scriptTriggered:`Script triggered`,printStopped:`Print stopped`,printPaused:`Print paused`,printResumed:`Print resumed`,referenceDeleted:`Reference deleted`,detectionAreaSaved:`Detection area saved`,failedToRunScript:`Failed to run script`,failedToStopPrint:`Failed to stop print`,failedToPausePrint:`Failed to pause print`,failedToResumePrint:`Failed to resume print`,failedToControlChamberLight:`Failed to control chamber light`,failedToSetSpeed:`Failed to set print speed`,failedToUpdateSetting:`Failed to update setting`,failedToSkipObjects:`Failed to skip objects`,failedToRereadRfid:`Failed to re-read RFID`,failedToCheckPlate:`Failed to check plate`,failedToUpdateLabel:`Failed to update label`,failedToDeleteReference:`Failed to delete reference`,failedToSaveDetectionArea:`Failed to save detection area`,plateCheckEnabled:`Plate check enabled`,plateCheckDisabled:`Plate check disabled`,calibrationSaved:`Calibration saved!`,calibrationFailed:`Calibration failed`,rfidRereadInitiated:`RFID re-read initiated`,loadInitiated:`Loading filament…`,unloadInitiated:`Unloading filament…`,failedToLoad:`Failed to load filament`,failedToUnload:`Failed to unload filament`},connection:{connected:`Connected`,offline:`Offline`},plateStatus:{markCleared:`Mark plate as cleared`,cleared:`Plate Clear`,notCleared:`Plate not Clear`,inUse:`Plate in Use`},queue:{inQueue:`{{count}} print in queue`,inQueue_plural:`{{count}} prints in queue`},controls:`Controls`,rfid:{reread:`Re-read RFID`},ams:{load:`Load`,unload:`Unload`},bedJog:{title:`Jog Controls`,bed:`Bed`,step:`Step (mm)`,up:`Move plate up`,down:`Move plate down`,disabledWhilePrinting:`Disabled while printing`,notHomedTitle:`Printer is not homed`,notHomedMessage:`The printer has not been homed since the last print. Run auto-home first for safe positioning (parks the toolhead, then homes X, Y, and Z), or move anyway — soft endstops will be bypassed.`,homeZ:`Auto Home`,moveAnyway:`Move anyway`,homingStarted:`Auto-homing printer…`},permission:{noAdd:`You do not have permission to add printers`,noEdit:`You do not have permission to edit printers`,noDelete:`You do not have permission to delete printers`,noControl:`You do not have permission to control printers`,noFiles:`You do not have permission to access printer files`,noAmsRfid:`You do not have permission to re-read AMS RFID`,noSmartPlugControl:`You do not have permission to control smart plugs`,noCamera:`You do not have permission to view cameras`},modal:{addTitle:`Add Printer`,editTitle:`Edit Printer`,myPrinter:`My Printer`,selectModel:`Select model...`,locationGroup:`Location / Group (optional)`,locationPlaceholder:`e.g., Workshop, Office, Basement`,autoArchiveLabel:`Auto-archive completed prints`,fromPrinterSettings:`From printer settings`,modelOptional:`Model (optional)`,saveChanges:`Save Changes`},skipObjects:{tooltip:`Skip objects`,onlyWhilePrinting:`Skip objects (only while printing)`,requiresMultiple:`Skip objects (requires 2+ objects)`,title:`Skip Objects`,matchIdsInfo:`Match IDs with your printer display`,printerShowsIds:`The printer screen shows object IDs on the build plate`,skipSelected:`Skip Selected`,skipping:`Skipping...`,noObjectsSelected:`No objects selected`,selectObjectsToSkip:`Select objects you want to skip from the current print`,skipped:`skipped`,objectsSkipped:`Objects skipped`,activeCount:`{{count}} active`,waitForLayer:`Wait for layer 2+ to skip objects (currently layer {{layer}})`,skip:`Skip`,confirmTitle:`Skip Object?`,confirmMessage:`Are you sure you want to skip "{{name}}"? This cannot be undone.`},confirm:{deleteTitle:`Delete Printer`,deleteMessage:`Are you sure you want to delete "{{name}}"? This will remove all connection settings.`,deleteArchivesNote:`All print history for this printer will be permanently deleted.`,keepArchivesNote:`Print history will be kept but no longer associated with this printer.`,stopTitle:`Stop Print`,stopMessage:`Are you sure you want to stop the current print on "{{name}}"? This will cancel the print job.`,stopButton:`Stop Print`,pauseTitle:`Pause Print`,pauseMessage:`Are you sure you want to pause the current print on "{{name}}"?`,pauseButton:`Pause Print`,resumeTitle:`Resume Print`,resumeMessage:`Are you sure you want to resume the print on "{{name}}"?`,resumeButton:`Resume Print`,powerOnTitle:`Power On Printer`,powerOnMessage:`Are you sure you want to turn ON the power for "{{name}}"?`,powerOnButton:`Power On`,powerOffTitle:`Power Off Printer`,powerOffMessage:`Are you sure you want to turn OFF the power for "{{name}}"?`,powerOffWarning:`WARNING: "{{name}}" is currently printing! Are you sure you want to turn OFF the power? This will interrupt the print and may damage the printer.`,powerOffButton:`Power Off`,haToggleTitle:`Toggle "{{name}}"`,haToggleMessage:`Toggle the Home Assistant entity {{entity}}? This may turn power off if it is currently on.`,haToggleWarning:`WARNING: "{{name}}" is currently printing! Toggling {{entity}} may cut power and interrupt the print. Continue?`,haToggleButton:`Toggle`},bulk:{select:`Select`,selectAll:`Select All`,selectByLocation:`Select by Location`,selected:`{{count}} selected`,actions:{stop:`Stop`,pause:`Pause`,resume:`Resume`,clearPlate:`Clear Bed`,clearHMS:`Clear Notifications`},confirm:{stopTitle:`Stop {{count}} Prints`,stopMessage:`This will cancel active prints on {{count}} printer(s). This action cannot be undone.`,stopButton:`Stop All`,pauseTitle:`Pause {{count}} Prints`,pauseMessage:`This will pause active prints on {{count}} printer(s).`,pauseButton:`Pause All`,clearPlateTitle:`Clear {{count}} Print Beds`,clearPlateMessage:`This will clear the print bed on {{count}} printer(s) and may trigger queued jobs.`,clearPlateButton:`Clear All`},success:`{{action}} completed on {{count}} printer(s)`,partial:`{{succeeded}} succeeded, {{failed}} failed`,noneApplicable:`No selected printers are in the right state for this action`,selectByState:`Select by State`},discovery:{title:`Discover Printers`,searching:`Searching...`,scanning:`Scanning...`,scanProgress:`Scanning... {{scanned}}/{{total}}`,foundPrinters:`Found {{count}} printer(s)`,noPrintersFound:`No printers found`,noPrintersFoundSubnet:`No printers found in the specified subnet.`,noPrintersFoundNetwork:`No printers found on the network.`,allConfigured:`All discovered printers are already configured.`,alreadyAdded:`Already added`,select:`Select`,manualEntry:`Manual Entry`,addFromCloud:`Add from Cloud`,subnetToScan:`Subnet to scan`,dockerNote:`Docker detected. Enter your printer's subnet in CIDR notation. Requires network_mode: host in docker-compose.yml.`,scanSubnet:`Scan Subnet for Printers`,discoverNetwork:`Discover Printers on Network`,scanningSubnet:`Scanning subnet for Bambu printers...`,scanningNetwork:`Scanning network...`,serialRequired:`Serial required`,unknown:`Unknown`,failedToStart:`Failed to start discovery`,customSubnetOption:`Custom subnet...`,customSubnetLabel:`Custom subnet (CIDR)`,customSubnetNote:`Use a custom subnet if your printer is on a different network than this server. The FTP (990) and MQTT (8883) ports must be reachable across the routing boundary.`},drying:{start:`Start Drying`,stop:`Stop Drying`,temperature:`Temperature`,duration:`Duration`,hours:`hours`,timeRemaining:`{{time}} left`,active:`Drying`,notSupported:`Drying not supported`,powerRequired:`Connect AMS power adapter to enable drying`,startingDrying:`Starting drying...`,stoppingDrying:`Stopping drying...`,rotateTray:`Rotate spool during drying`},amsBackup:{titleOn:`AMS Filament Backup is ON. Click to disable.`,titleOff:`AMS Filament Backup is OFF. Click to enable.`,titleUnknown:`AMS Filament Backup status unavailable on this printer.`,toastEnabled:`AMS Filament Backup enabled`,toastDisabled:`AMS Filament Backup disabled`,modalTitle:`AMS Filament Backup`,modalHelp:`When the active slot runs out, the printer cycles through any matching same-preset, same-colour slots in this order.`,modalNoSlots:`No filament loaded.`,modalNoPairs:`No backup pairs — no two slots share the same filament profile and colour.`,extruderRightShort:`R`,extruderLeftShort:`L`,stateOn:`Enabled`,stateOff:`Disabled`,stateUnknown:`Unsupported on this printer`},activeJobSlot:{title:`This slot is filament {{n}} in the active print`,ariaLabel:`Active print slot {{n}}`},filaments:`Filaments`,openCameraOverlay:`Open camera overlay`,openCameraWindow:`Open camera in new window`,firmwareUpdateAvailable:`Firmware update available: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Up to date`,firmwareUpdateButton:`Update`,plateDetection:{noPermission:`You do not have permission to update printers`,enabledClick:`Plate check enabled - Click to disable`,disabledClick:`Plate check disabled - Click to enable`,manageCalibration:`Manage plate detection calibration`,calibrationRequired:`Calibration Required`,calibrationInstructions:`Please ensure the build plate is completely empty, then click Calibrate.`,calibrationDescription:`Calibration captures a reference image of the empty plate. Future checks will compare against this reference to detect objects.`,calibrationTip:`Tip: You can store up to 5 calibrations for different plates. The system automatically uses the best match when checking.`,plateEmpty:`Plate appears empty`,objectsDetected:`Objects detected on plate`,confidence:`Confidence`,difference:`Difference`,analysisPreview:`Analysis preview:`,analysisLegend:`Green box = detection area, Red overlay = differences from calibration`,savedReferences:`Saved References ({{count}}/{{max}})`,deleteReference:`Delete reference`,labelPlaceholder:`Label...`,clickToEdit:`{{label}} - Click to edit`,clickToAddLabel:`Click to add label`},speed:{title:`Print Speed`,silent:`Silent (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Airduct Mode`,cooling:`Cooling`,heating:`Heating`},noSdCard:`No SD`,door:{open:`Open`,closed:`Closed`},fans:{partCooling:`Part Cooling Fan`,auxiliary:`Auxiliary Fan`,chamber:`Chamber Fan`},clickToViewHmsErrors:`Click to view HMS errors`,estimatedCompletion:`Estimated completion time`,plateNumber:`Plate {{number}}`,slotOptions:`Slot options`,amsPopup:{friendlyName:`AMS Name`,friendlyNamePlaceholder:`e.g. AMS Friendly Name`,serialNumber:`Serial Number`,firmwareVersion:`Firmware`,save:`Save`,clear:`Clear`,noEditPermission:`You do not have permission to rename AMS units`},firmwareModal:{title:`Firmware Update`,titleUpToDate:`Firmware Info`,currentVersion:`Current:`,latestVersion:`Latest:`,releaseNotes:`Release Notes`,checkingPrereqs:`Checking prerequisites...`,sdCardReady:`SD card ready. Click below to upload firmware.`,uploadedSuccess:`Firmware uploaded to SD card!`,applyInstructions:`To apply the update on your printer:`,step1:`On the printer's touchscreen, go to Settings`,step2:`Navigate to Firmware`,step3:`Select Update from SD card`,step4:`The update will take 10-20 minutes`,done:`Done`,starting:`Starting...`,uploadFirmware:`Upload Firmware`,uploadFailed:`Failed to start upload: {{error}}`,uploadedToast:`Firmware uploaded! Trigger update from printer screen.`,availableVersions:`Available versions`,usable:`Usable`,unavailable:`Unavailable`,installed:`Installed`,newerBadge:`newer`,olderBadge:`older`,currentBadge:`current`},accessCodePlaceholder:`Leave empty to keep current`,roi:{title:`Detection Area (ROI)`,xStart:`X Start`,yStart:`Y Start`,width:`Width`,height:`Height`,instruction:`Adjust the detection area to focus on the build plate. The green box in the preview shows the current area.`},developerModeWarning:`Developer LAN mode is not enabled on: {{names}}. Some features may not work.`,howToEnable:`How to enable`,incompatibleFile:`This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}`,dropNotPrintable:`Only .gcode and .gcode.3mf files can be printed`,dropToPrint:`Drop to print`,cannotPrint:`Printer busy`},archives:{title:`Print Archives`,no3mfBanner:{title:`Some recent prints couldn't be archived with thumbnails`,body:`The slicer didn't leave the .gcode.3mf on the printer's SD card, so Bambuddy couldn't pull the thumbnail or slicer metadata. This is usually because "Store sent files on external storage" is off in the slicer (Bambu Studio / OrcaSlicer Device tab).`,docsLink:`See install step 4`,dismissLabel:`Dismiss this notice`},searchPlaceholder:`Search archives...`,filterByPrinter:`Filter by printer`,filterByStatus:`Filter by status`,sortBy:`Sort by`,sortNewest:`Newest first`,sortOldest:`Oldest first`,sortName:`Name`,sortDuration:`Duration`,sortLargest:`Largest first`,sortSmallest:`Smallest first`,sortSize:`Size`,noArchives:`No archives found`,noArchivesSearch:`No archives match your search`,originalPrintNotVisible:`Original print not visible - try clearing filters`,noArchivesYet:`No archives yet`,prints:`prints`,pagination:{showing:`Showing`,to:`to`,of:`of`,show:`Show`,page:`Page`,all:`All`},loadingArchives:`Loading archives...`,releaseToUpload:`Release to upload`,showAll:`Show all`,showFavoritesOnly:`Show favorites only`,gridView:`Grid view`,listView:`List view`,calendarView:`Calendar view`,logView:`Print Log`,manageTags:`Manage Tags`,showFailedPrints:`Show failed prints`,hideFailedPrints:`Hide failed prints`,hideDuplicates:`Hide Duplicates`,viewOriginalPrint:`Click to view original print (#{{id}})`,printTime:`Print Time`,filamentUsed:`Filament Used`,cost:`Cost`,reprint:`Reprint`,preview:`Preview`,deleteArchive:`Delete Archive`,deleteConfirm:`Are you sure you want to delete this archive?`,favorite:`Favorite`,unfavorite:`Remove from favorites`,viewDetails:`View Details`,status:{completed:`Completed`,failed:`Failed`,stopped:`Stopped`},toast:{source3mfAttached:`Source 3MF attached: {{filename}}`,failedUploadSource3mf:`Failed to upload source 3MF`,source3mfRemoved:`Source 3MF removed`,failedRemoveSource3mf:`Failed to remove source 3MF`,f3dAttached:`F3D attached: {{filename}}`,failedUploadF3d:`Failed to upload F3D`,f3dRemoved:`F3D removed`,failedRemoveF3d:`Failed to remove F3D`,timelapseAttached:`Timelapse attached: {{filename}}`,timelapseAlreadyAttached:`Timelapse already attached`,noMatchingTimelapse:`No matching timelapse found`,failedScanTimelapse:`Failed to scan for timelapse`,failedAttachTimelapse:`Failed to attach timelapse`,timelapseRemoved:`Timelapse removed`,failedRemoveTimelapse:`Failed to remove timelapse`,timelapseUploaded:`Timelapse uploaded: {{filename}}`,failedUploadTimelapse:`Failed to upload timelapse`,archiveDeleted:`Archive deleted`,failedDeleteArchive:`Failed to delete archive`,addedToFavorites:`Added to favorites`,removedFromFavorites:`Removed from favorites`,projectUpdated:`Project updated`,failedUpdateProject:`Failed to update project`,linkCopied:`Link copied to clipboard`,failedCopyLink:`Failed to copy link`,photoDeleted:`Photo deleted`,failedDeletePhoto:`Failed to delete photo`,failedDeleteArchives:`Failed to delete archives`,failedUpdateFavorites:`Failed to update favorites`,exportDownloaded:`Export downloaded`,exportFailed:`Export failed`},menu:{print:`Print`,schedule:`Schedule`,openInBambuStudio:`Open in Slicer`,slice:`Slice`,externalLink:`External Link`,viewOnMakerWorld:`View on MakerWorld`,preview3d:`3D Preview`,viewTimelapse:`View Timelapse`,scanForTimelapse:`Scan for Timelapse`,uploadTimelapse:`Upload Timelapse`,removeTimelapse:`Remove Timelapse`,downloadSource3mf:`Download Source 3MF`,uploadSource3mf:`Upload Source 3MF`,replaceSource3mf:`Replace Source 3MF`,removeSource3mf:`Remove Source 3MF`,uploadF3d:`Upload F3D`,replaceF3d:`Replace F3D`,downloadF3d:`Download F3D`,removeF3d:`Remove F3D`,download:`Download`,copyDownloadLink:`Copy Download Link`,qrCode:`QR Code`,viewPhotos:`View Photos`,viewPhotosCount:`View Photos ({{count}})`,projectPage:`Project Page`,addToFavorites:`Add to Favorites`,removeFromFavorites:`Remove from Favorites`,edit:`Edit`,printLog:`Print Log`,goToProject:`Go to Project: {{name}}`,addToProject:`Add to Project`,removeFromProject:`Remove from Project`,loading:`Loading...`,noProjectsAvailable:`No projects available`,searchProjects:`Search projects…`,select:`Select`,deselect:`Deselect`,delete:`Delete`},permission:{noReprint:`You do not have permission to reprint this archive`,noAddToQueue:`You do not have permission to add to queue`,noUpdateArchives:`You do not have permission to update archives`,noUploadFiles:`You do not have permission to upload files`,noDownload:`You do not have permission to download archives`,noCopyLink:`You do not have permission to copy download links`,noDelete:`You do not have permission to delete this archive`,noEdit:`You do not have permission to edit this entry`,noCreate:`You do not have permission to create archives`},platePicker:{title:`Select plate to preview`,hint:`This archive has multiple plates. Pick one to open in the GCode viewer.`,plateLabel:`Plate {{index}}`,objectCount:`{{count}} object`,objectCount_plural:`{{count}} objects`,noGcode:`This archive has no sliced G-code to preview. Open it in Bambu Studio to slice first.`},card:{previousPlate:`Previous plate`,nextPlate:`Next plate`,plateNumber:`Plate {{index}}`,moreOptions:`Right-click for more options`,addToFavorites:`Add to favorites`,removeFromFavorites:`Remove from favorites`,cancelled:`cancelled`,failed:`failed`,duplicate:`duplicate`,duplicateTitle:`This model has been printed before`,openSource3mf:`Open source 3MF in Bambu Studio (right-click for more options)`,downloadF3d:`Download Fusion 360 design file`,viewTimelapse:`View timelapse`,viewPhoto:`View 1 photo`,viewPhotos:`View {{count}} photos`,openFolder:`Open folder: {{name}}`,slicedFile:`Sliced file - ready to print`,sourceFile:`Source file only - no AMS mapping available`,gcode:`GCODE`,source:`SOURCE`,project:`Project: {{name}}`,runsBadge:`{{count}} prints`,runsBadgeTitle:`{{count}} prints total — {{successful}} successful, {{failed}} failed. Click to see the full print log.`,estimated:`Estimated: {{time}}`,actual:`Actual: {{time}}`,accuracy:`Accuracy: {{percent}}%`,filament:`{{weight}}g`,layer:`{{count}} layer`,layers:`{{count}} layers`,object:`{{count}} object`,objects:`{{count}} objects`,slicedFor:`Sliced for {{model}}`,uploadedBy:`Uploaded By`,noPermissionReprint:`You do not have permission to reprint`,noFileForReprint:`No 3MF file available — the file could not be downloaded from the printer when the print was recorded`,noPermissionEdit:`You do not have permission to edit archives`,noPermissionDelete:`You do not have permission to delete archives`,reprint:`Reprint`,schedulePrint:`Schedule Print`,schedule:`Schedule`,openInBambuStudio:`Open in Slicer`,openInBambuStudioToSlice:`Open in Slicer to slice`,slice:`Slice`,externalLink:`External Link`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`View project`,noExternalLink:`No external link`,preview3d:`3D Preview`,download:`Download`,edit:`Edit`,delete:`Delete`},runLog:{title:`Print Log`,modalTitle:`Print Log — {{name}}`,modalTitleFallback:`this archive`,empty:`No print events recorded for this archive yet.`,col:{date:`Date`,status:`Status`,duration:`Duration`,filament:`Filament`,cost:`Cost`},status:{completed:`Completed`,failed:`Failed`,cancelled:`Cancelled`,stopped:`Stopped`,skipped:`Skipped`,printing:`Printing`}},modal:{deleteArchive:`Delete Archive`,deleteConfirm:`Are you sure you want to delete "{{name}}"? This action cannot be undone.`,deleteButton:`Delete`,deletePurgeStats:`Also remove this print from Quick Stats (filament, time, cost, energy)`,deleteQueueItemsWarning:`{{count}} queue item(s) linked to this archive will also be removed.`,deleteBlockedByPrinting:`Cannot delete — {{count}} queue item(s) are currently printing. Stop the print first, then retry.`,removeSource3mf:`Remove Source 3MF`,removeSource3mfConfirm:`Are you sure you want to remove the source 3MF file from "{{name}}"? This will delete the original slicer project file.`,removeButton:`Remove`,removeF3d:`Remove F3D`,removeF3dConfirm:`Are you sure you want to remove the Fusion 360 design file from "{{name}}"?`,removeTimelapse:`Remove Timelapse`,removeTimelapseConfirm:`Are you sure you want to remove the timelapse video from "{{name}}"?`,timelapse:`{{name}} - Timelapse`,selectTimelapse:`Select Timelapse`,selectTimelapseDesc:`No auto-match found. Select the timelapse for this print:`,deleteArchives:`Delete Archives`,deleteArchivesConfirm:`Are you sure you want to delete {{count}} archive(s)? This action cannot be undone.`,deleteCount:`Delete {{count}}`},page:{title:`Archives`,printsCount:`{{filtered}} of {{total}} prints`,dropFilesHere:`Drop .3mf files here`,releaseToUpload:`Release to upload`,only3mfSupported:`Only .3mf files are supported`,close:`Close`,selected:`{{count}} selected`,selectAll:`Select All`,tags:`Tags`,project:`Project`,favorite:`Favorite`,delete:`Delete`,toggledFavorites:`Toggled favorites for {{count}} archive(s)`,failedUpdateFavorites:`Failed to update favorites`,archivesDeleted:`{{count}} archive(s) deleted`,failedDeleteArchives:`Failed to delete archives`,photoDeleted:`Photo deleted`,failedDeletePhoto:`Failed to delete photo`},list:{name:`Name`,printer:`Printer`,date:`Date`,size:`Size`,actions:`Actions`,hasTimelapse:`Has timelapse`},log:{date:`Date`,printName:`Print Name`,printer:`Printer`,user:`User`,status:`Status`,duration:`Duration`,filament:`Filament`,allPrinters:`All Printers`,allUsers:`All Users`,allStatuses:`All Statuses`,cancelled:`Cancelled`,skipped:`Skipped`,dateFrom:`From`,dateTo:`To`,noEntries:`No print log entries found`,showing:`Showing {{count}} of {{total}} entries`,rowsPerPage:`Rows`,page:`Page`,prev:`Prev`,next:`Next`,clearLog:`Clear Log`,clearLogTitle:`Clear Print Log`,clearLogConfirm:`All print log entries will be permanently deleted. Archives and queue items are not affected. This action cannot be undone. Are you sure?`,clearLogButton:`Clear All`,cleared:`{{count}} log entries cleared`,clearFailed:`Failed to clear print log`,deleteEntryTitle:`Delete print log entry`,deleteEntryConfirm:`This entry will be removed from the log and its filament, time, and cost contributions will drop out of Quick Stats. The matching archive (if any) is not affected. This action cannot be undone.`,entryDeleted:`Print log entry deleted`,entryDeleteFailed:`Failed to delete print log entry`,editEntryTitle:`Edit print log entry`,editEntryDescription:`Classify this print run. The Failure Analysis widget groups by these values, so updates flow through to stats immediately.`,entryUpdated:`Print log entry updated`,entryUpdateFailed:`Failed to update print log entry`,statuses:{completed:`Completed`,failed:`Failed`,stopped:`Stopped`,cancelled:`Cancelled`,skipped:`Skipped`}}},queue:{title:`Print Queue`,subtitle:`Schedule and manage your print jobs`,addToQueue:`Add to Queue`,filamentShort:{rowBadge:`Insufficient filament for the assigned spool`,rowTooltip:`The dispatch scheduler flagged this item. Click Play to see the per-slot deficit and decide whether to print anyway.`,confirmTitle:`Insufficient filament`,confirmIntro:`The assigned spool cannot satisfy at least one slot. Print anyway?`,lineItem:`Slot {{slot}}: needs {{required}} g, {{remaining}} g remaining`,unknown:`unknown`,printAnyway:`Print Anyway`},print:`Print`,reprint:`Re-print`,schedulePrint:`Schedule Print`,editQueueItem:`Edit Queue Item`,printToPrinters:`Print to {{count}} Printers`,queueToPrinters:`Queue to {{count}} Printers`,queueSelectedPlates:`Queue {{count}} Plates`,selectAllPlates:`Select All {{count}} Plates`,deselectAll:`Deselect All`,printQueued:`Print queued`,itemsQueued:`{{count}} items queued`,sending:`Sending...`,sendingProgress:`Sending {{current}}/{{total}}...`,adding:`Adding...`,addingProgress:`Adding {{current}}/{{total}}...`,savingProgress:`Saving {{current}}/{{total}}...`,clearQueue:`Clear Queue`,clearHistory:`Clear History`,emptyQueue:`Queue is empty`,position:`Position`,scheduledTime:`Scheduled Time`,moveUp:`Move Up`,moveDown:`Move Down`,startNow:`Start Now`,printingInProgress:`Printing in progress...`,viewArchive:`View archive`,viewInFileManager:`View in File Manager`,itemCount:`{{count}} item`,itemCount_plural:`{{count}} items`,dragToReorder:`Drag to reorder (ASAP only)`,reorderHint:`Position only affects ASAP items. Scheduled items run at their set time.`,sjf:{label:`SJF`,tooltip:`Shortest Job First — scheduler prioritizes shorter prints`},addedBy:`Added by {{name}}`,nextInQueue:`Next in queue`,clearPlateSuccess:`Plate cleared — ready for next print`,plateNumber:`Plate {{index}}`,quantity:`Quantity`,quantityHint:`Creates {{count}} queue items`,activeBatches:`Active Batches`,batchProgress:`{{completed}} of {{total}} completed`,cancelBatch:`Cancel Remaining`,batchCancelled:`Remaining batch items cancelled`,cancelBatchConfirmTitle:`Cancel Batch`,cancelBatchConfirmMessage:`Cancel all remaining pending items in this batch?`,batch:{defaultName:`Batch`,label:`{{count}} item`,label_plural:`{{count}} items`,pendingCount:`{{count}} pending`,pendingCount_plural:`{{count}} pending`,expand:`Expand batch`,collapse:`Collapse batch`,groupAsBatch:`Group as batch…`,groupAsBatchDescription:`Combine the {{count}} selected items into a single collapsible batch.`,nameLabel:`Batch name`,namePlaceholder:`e.g. Friday gifts`,create:`Create batch`,ungroup:`Ungroup`,ungroupConfirmTitle:`Ungroup batch?`,ungroupConfirmMessage:`The items will stay in the queue but no longer be grouped together.`,dragGroup:`Drag group`},tabs:{queue:`Queue`,history:`History`,timeline:`Timeline`},layout:{flatList:`List`,byPrinter:`By Printer`,groupByPrinter:`Group by Printer`},history:{emptyTitle:`No history yet`,emptyDescription:`Completed, cancelled, and failed prints will appear here.`},dragGhost:{multiCount:`{{count}} items`,batch:`{{name}} ({{count}} copy)`,batch_plural:`{{name}} ({{count}} copies)`},sections:{currentlyPrinting:`Currently Printing`,queued:`Queued`,history:`History`},status:{pending:`Pending`,waiting:`Waiting`,printing:`Printing`,paused:`Paused`,completed:`Completed`,failed:`Failed`,skipped:`Skipped`,cancelled:`Cancelled`},summary:{printing:`Printing`,queued:`Queued`,totalTime:`Total Queue Time`,totalWeight:`Total Queue Weight`,history:`History`},filter:{allPrinters:`All Printers`,unassigned:`Unassigned`,allStatus:`All Status`,allLocations:`All Locations`,any:`Any`},sort:{byPosition:`Sort by Position`,byName:`Sort by Name`,byPrinter:`Sort by Printer`,bySchedule:`Sort by Schedule`,byDate:`Sort by Date`,ascendingOldest:`Ascending (oldest first)`,descendingNewest:`Descending (newest first)`},badges:{staged:`Staged`,requiresPrevious:`Requires previous success`,autoPowerOff:`Auto power off`,gcodeInjection:`G-code`},empty:{title:`No prints scheduled`,description:`Schedule a print from the Archives page using the "Schedule" option in the context menu, or drag and drop files to get started.`},time:{asap:`ASAP`,overdue:`Overdue`,now:`Now`,lessThanMinute:`In less than a minute`,inMinutes:`In {{count}} min`,inHours:`In {{count}} hours`},actions:{stopPrint:`Stop Print`,startPrint:`Start Print`,requeue:`Re-queue`},bulkEdit:{title:`Edit {{count}} Item`,title_plural:`Edit {{count}} Items`,description:`Only changed settings will be applied to selected items.`,printer:`Printer`,noChange:`— No change —`,queueOptions:`Queue Options`,staged:`Staged (manual start)`,autoPowerOff:`Auto power off after print`,requirePrevious:`Require previous success`,printOptions:`Print Options`,bedLevelling:`Bed levelling`,flowCalibration:`Flow calibration`,vibrationCalibration:`Vibration calibration`,layerInspection:`First layer inspection`,timelapse:`Timelapse`,useAms:`Use AMS`,nozzleOffsetCali:`Nozzle offset calibration`,applyChanges:`Apply Changes`,selectAll:`Select All`,deselectAll:`Deselect All`,selected:`{{count}} selected`,editSelected:`Edit Selected`,cancelSelected:`Cancel Selected`},confirm:{cancelTitle:`Cancel Scheduled Print`,cancelMessage:`Are you sure you want to cancel "{{name}}"?`,stopTitle:`Stop Print`,stopMessage:`Are you sure you want to stop the current print "{{name}}"? This will cancel the print job on the printer.`,removeTitle:`Remove from History`,removeMessage:`Are you sure you want to remove "{{name}}" from the queue history?`,clearHistoryTitle:`Clear History`,clearHistoryMessage:`Are you sure you want to remove all {{count}} item(s) from the history?`,cancelButton:`Cancel Print`,stopButton:`Stop Print`,thisPrint:`this print`,thisItem:`this item`},toast:{cancelled:`Queue item cancelled`,cancelFailed:`Failed to cancel item`,removed:`Queue item removed`,removeFailed:`Failed to remove item`,stopped:`Print stopped`,stopFailed:`Failed to stop print`,released:`Print released to queue`,startFailed:`Failed to start print`,reorderFailed:`Failed to reorder queue`,historyCleared:`Cleared {{count}} history item(s)`,clearHistoryFailed:`Failed to clear history`,updateFailed:`Failed to update items`,bulkCancelled:`Cancelled {{count}} item(s)`,bulkCancelFailed:`Failed to cancel items`,batchCreated:`Batch "{{name}}" created`,batchCreateFailed:`Failed to create batch`,batchUngrouped:`Ungrouped {{count}} item(s)`,batchUngroupFailed:`Failed to ungroup batch`},timeline:{listView:`List`,timelineView:`Timeline`,unassigned:`Unassigned`,noData:`No scheduled prints for this day`,nothingCommitted:`No committed schedules in this window. Staged items, waiting items, and ASAP jobs on idle printers are not shown — set a scheduled time or release a staged item to see it here.`,allDoneBy:`All prints estimated done by {{time}}`,staged:`Staged`,filterAll:`Show All`,filterPrinting:`Printing`,filterQueued:`Queued`,time:{anyMoment:`any moment`,minutesLeft:`{{minutes}}m left`,hoursLeft:`{{hours}}h left`,hoursMinutesLeft:`{{hours}}h {{minutes}}m left`},day:{previous:`Previous day`,next:`Next day`,today:`Today`},window:{back12h:`Back 12 hours`,forward12h:`Forward 12 hours`,now:`Now`},printerColumnHeader:`Printer`},permissions:{noStopPrint:`You do not have permission to stop prints`,noStartPrint:`You do not have permission to start prints`,noEdit:`You do not have permission to edit this queue item`,noCancel:`You do not have permission to cancel this queue item`,noRequeue:`You do not have permission to re-queue items`,noRemove:`You do not have permission to remove this queue item`,noClearHistory:`You do not have permission to clear all history`,noEditItems:`You do not have permission to edit queue items`,noCancelItems:`You do not have permission to cancel queue items`}},backgroundDispatch:{unknownFile:`Unknown file`,unknownPrinter:`Unknown printer`,startingPrints:`Starting prints`,progressSummary:`{{complete}}/{{total}} complete • Dispatched: {{dispatched}} • Processing: {{processing}}`,expandDetails:`Expand dispatch details`,collapseDetails:`Collapse dispatch details`,dismissToast:`Dismiss dispatch toast`,cancelDispatchJob:`Cancel dispatch job`,cancel:`Cancel`,cancelling:`Cancelling…`,awaitingPrinter:`Awaiting printer…`,status:{dispatched:`Dispatched`,processing:`Processing`,completed:`Completed`,failed:`Failed`,cancelled:`Cancelled`},toast:{cancellingUpload:`Cancelling upload...`,cancelled:`Dispatch cancelled`,cancelFailed:`Failed to cancel dispatch`,completeWithFailures:`Background dispatch complete: {{completed}} succeeded, {{failed}} failed`,completeSuccess:`Background dispatch complete: {{completed}} succeeded`,printStartedRemaining:`{{completed}} print(s) started, {{remaining}} more sending...`}},stats:{title:`Statistics`,subtitle:`Drag widgets to rearrange. Click the eye icon to hide.`,overview:`Overview`,totalPrints:`Total Prints`,successRate:`Success Rate`,totalPrintTime:`Total Print Time`,printTime:`Print Time`,totalFilament:`Total Filament Used`,filamentUsed:`Filament Used`,filamentCost:`Filament Cost`,totalCost:`Total Cost`,energyUsed:`Energy Used`,energyCost:`Energy Cost`,energyWarmingUpTooltip:`Energy tracking is still collecting hourly snapshots. Date-range totals will become accurate once at least one snapshot exists before the selected range. Early values may undercount.`,averagePrintTime:`Average Print Time`,printsPerDay:`Prints per Day`,byPrinter:`By Printer`,printsByPrinter:`Prints by Printer`,byMaterial:`By Material`,byMonth:`By Month`,last7Days:`Last 7 Days`,last30Days:`Last 30 Days`,last90Days:`Last 90 Days`,allTime:`All Time`,quickStats:`Quick Stats`,printActivity:`Print Activity`,filamentTypes:`Filament Types`,filamentTrends:`Filament Trends`,failureAnalysis:`Failure Analysis`,timeAccuracy:`Time Accuracy`,successful:`Successful:`,failed:`Failed:`,cancelled:`Cancelled:`,perfectEstimate:`100% = perfect estimate`,noTimeAccuracyData:`No time accuracy data yet`,noFilamentData:`No filament data available`,noPrinterData:`No printer data available`,noPrintData:`No print data available`,noPrintDataLast30Days:`No print data in the last 30 days`,failureReasons:`Failure Reasons`,topFailureReasons:`Top Failure Reasons`,failedPrintsCount:`{{failed}} / {{total}} prints failed`,lastWeekRate:`Last week: {{rate}}%`,resetLayout:`Reset Layout`,recalculateCosts:`Recalculate Costs`,recalculateCostsHint:`Recalculate all archive costs using current filament prices`,exportStats:`Export Stats`,exportAsCsv:`Export as CSV`,exportAsExcel:`Export as Excel`,hiddenCount:`{{count}} Hidden`,exportDownloaded:`Export downloaded`,exportFailed:`Export failed`,layoutReset:`Layout reset`,recalculatedCosts:`Recalculated costs for {{count}} archives`,recalculateFailed:`Failed to recalculate costs`,loadingStats:`Loading statistics...`,noPermissionResetLayout:`You do not have permission to reset layout`,noPermissionRecalculate:`You do not have permission to recalculate costs`,noPrintDataInRange:`No print data in selected range`,periodFilament:`Period Filament`,periodCost:`Period Cost`,avgPerPrint:`Avg per Print`,usageOverTime:`Usage Over Time`,filamentByWeight:`Weight`,printDuration:`Print Duration`,printerUtilization:`Printer Utilization`,filamentSuccess:`Success by Material`,printHabits:`Print Habits`,printTimeOfDay:`Print Time of Day`,colorDistribution:`Color Distribution`,noColorData:`No color data available`,records:`Records`,longestPrint:`Longest Print`,heaviestPrint:`Heaviest Print`,mostExpensivePrint:`Most Expensive`,busiestDay:`Busiest Day`,successStreak:`Success Streak`,streakPrint:`consecutive print`,streakPrints:`{{count}} consecutive prints`,printerStats:`Printer Stats`,hours:`hours`,avgPrints:`Avg. prints`,noArchiveData:`No print data available`,filamentByTime:`Time`,avgWeight:`Avg. weight`,avgTime:`Avg. time`,filamentByPrints:`Prints`,timeframe:{today:`Today`,"this-week":`This Week`,"this-month":`This Month`,"last-7":`Last 7 Days`,"last-30":`Last 30 Days`,"last-90":`Last 90 Days`,"this-year":`This Year`,"all-time":`All Time`,custom:`Custom Range`,from:`From`,to:`To`},allUsers:`All Users`,noUser:`No User (System)`,filterByUser:`Filter by User`},maintenance:{title:`Maintenance`,overview:`Overview`,allOk:`All maintenance up to date`,dueCount:`{{count}} item due`,dueCount_plural:`{{count}} items due`,warningCount:`{{count}} warning`,warningCount_plural:`{{count}} warnings`,totalPrintTime:`Total Print Time`,nextMaintenance:`Next Maintenance`,nothingDue:`Nothing due`,tasks:`Tasks`,lastPerformed:`Last performed`,interval:`Interval`,hoursRemaining:`{{hours}}h remaining`,hoursOverdue:`{{hours}}h overdue`,markDone:`Mark as Done`,performMaintenance:`Perform Maintenance`,history:`History`,noHistory:`No maintenance history`,editPrintHours:`Edit Print Hours`,currentHours:`Current Hours`,statusTab:`Status`,settingsTab:`Settings`,overdueCount:`{{count}} overdue`,dueSoonCount:`{{count}} due soon`,dueSoon:`Due soon`,allGood:`All good`,overdueBy:`Overdue by {{duration}}`,dueIn:`Due in {{duration}}`,timeLeft:`{{duration}} left`,day:`1 day`,days:`{{count}} days`,week:`1 week`,weeks:`{{count}} weeks`,month:`1 month`,months:`{{count}} months`,year:`1 year`,maintenanceTypes:`Maintenance Types`,maintenanceTypesDescription:`System types and your custom maintenance tasks`,addCustomType:`Add Custom Type`,restoreDefaults:`Restore Default Tasks`,intervalType:`Interval Type`,intervalValue:`Interval ({{type}})`,icon:`Icon`,documentationLink:`Documentation Link (optional)`,assignToPrinters:`Assign to Printers`,selectAtLeastOnePrinter:`Select at least one printer`,addType:`Add Type`,custom:`Custom`,printHours:`Print Hours`,calendarDays:`Calendar Days`,exampleName:`e.g., Replace HEPA Filter`,viewDocumentation:`View documentation`,timeBasedInterval:`Time-based interval`,intervalOverrides:`Interval Overrides`,intervalOverridesDescription:`Customize intervals for specific printers`,assignedToPrinters:`Assigned to printers:`,noPrintersAssigned:`No printers assigned`,addPrinterShort:`Add:`,printersAssignedClick:`{{count}} printer(s) assigned - click to manage`,removeFromPrinter:`Remove from this printer`,types:{lubricateCarbonRods:`Lubricate Carbon Rods`,lubricateRails:`Lubricate Linear Rails`,cleanNozzle:`Clean Nozzle/Hotend`,checkBelts:`Check Belt Tension`,cleanBuildPlate:`Clean Build Plate`,checkExtruder:`Check Extruder Gears`,checkCooling:`Check Cooling Fans`,generalInspection:`General Inspection`,cleanCarbonRods:`Clean Carbon Rods`,lubricateSteelRods:`Lubricate Steel Rods`,cleanSteelRods:`Clean Steel Rods`,cleanLinearRails:`Clean Linear Rails`,checkPtfeTube:`Check PTFE Tube`,replaceHepaFilter:`Replace HEPA Filter`,replaceCarbonFilter:`Replace Carbon Filter`,lubricateLeftNozzleRail:`Lubricate Left Nozzle Rail`},maintenanceComplete:`Maintenance marked as complete`,typeUpdated:`Maintenance type updated`,typeDeleted:`Maintenance type deleted`,defaultsRestored:`Restored {{count}} default task(s)`,printHoursUpdated:`Print hours updated`,printerAssigned:`Printer assigned`,printerRemoved:`Printer removed`,deleteTypeConfirm:`Delete "{{name}}"?`,deleteSystemTypeTitle:`Delete default maintenance task?`,deleteSystemTypeMessage:`Are you sure you want to delete the default maintenance task "{{name}}"?`,noPermissionUpdate:`You do not have permission to update maintenance items`,noPermissionPerform:`You do not have permission to perform maintenance`,noPermissionEditTypes:`You do not have permission to edit maintenance types`,noPermissionDeleteTypes:`You do not have permission to delete maintenance types`,noPermissionEditHours:`You do not have permission to edit print hours`,noPermissionRemovePrinter:`You do not have permission to remove printer assignments`,noPermissionAssignPrinter:`You do not have permission to assign printers`,noPermissionEditIntervals:`You do not have permission to edit intervals`,configureSettings:`Configure maintenance types and intervals`},settings:{title:`Settings`,general:`General`,tabs:{general:`General`,smartPlugs:`Smart Plugs`,notifications:`Notifications`,queue:`Workflow`,filament:`Filament`,network:`Network`,apiKeys:`API Keys`,virtualPrinter:`Virtual Printer`,spoolbuddy:`SpoolBuddy`,failureDetection:`Failure Detection`,users:`Authentication`,backup:`Backup`,emailAuth:`Email Authentication`,ldap:`LDAP`,twoFa:`Two-Factor Auth`,oidc:`SSO / OIDC`,security:`Security`},spoolbuddy:{infoTitle:`SpoolBuddy devices`,infoBody:`SpoolBuddy kiosks register themselves automatically via heartbeat. Unregister a device here if it is no longer in use or if a stale duplicate was left behind by a daemon crash.`,duplicatesTitle:`{{count}} devices registered`,duplicatesBody:`Only the first registered device is used by the kiosk UI. If one of these is a stale duplicate from a crash, unregister it — an online device will re-register itself on its next heartbeat.`,empty:`No SpoolBuddy devices registered yet.`,online:`Online`,offline:`Offline`,unregister:`Unregister`,unregisterSuccess:`Device unregistered`,unregisterError:`Failed to unregister device`,confirmTitle:`Unregister SpoolBuddy device?`,confirmBody:`This will remove "{{hostname}}" ({{deviceId}}) from the database. If the device is online, it will re-register itself on its next heartbeat.`,ipAddress:`IP address`,firmware:`Firmware`,lastSeen:`Last seen`,daemonUptime:`Daemon uptime`,systemUptime:`System uptime`,never:`never`,nfc:`NFC`,scale:`Scale`,cpuTemp:`CPU temp`,cpuLoad:`CPU load`,memory:`Memory`,disk:`Disk`,update:`Update`,updateConfirmTitle:`Update Spoolbuddy daemon?`,updateConfirmBody:`Trigger a software update on "{{hostname}}"? The daemon will restart once the update is applied.`,restartBrowser:`Restart Browser`,restartBrowserConfirmTitle:`Restart kiosk browser?`,restartBrowserConfirmBody:`Restart the kiosk browser on "{{hostname}}"? The display will blank briefly.`,restartDaemon:`Restart Daemon`,restartDaemonConfirmTitle:`Restart Spoolbuddy daemon?`,restartDaemonConfirmBody:`Restart the Spoolbuddy daemon on "{{hostname}}"? The device will go offline for a few seconds.`,reboot:`Reboot`,rebootConfirmTitle:`Reboot device?`,rebootConfirmBody:`Reboot "{{hostname}}"? The device will be offline for around a minute.`,shutdown:`Shutdown`,shutdownConfirmTitle:`Shutdown device?`,shutdownConfirmBody:`Shutdown "{{hostname}}"? You will need physical access to power it back on.`,commandConfirm:`Confirm`,commandQueued:`Command queued`,commandError:`Failed to send command`},ldap:{title:`LDAP Authentication`,enabledDesc:`LDAP authentication is enabled`,disabledDesc:`LDAP authentication is disabled`,disabledHint:`Configure and save LDAP settings below, then enable.`,enabled:`LDAP authentication enabled`,disabled:`LDAP authentication disabled`,feature1:`Users can login with LDAP credentials`,feature2:`Local admin account remains as fallback`,feature3:`LDAP groups are mapped to BamBuddy groups on login`,serverConfig:`LDAP Server Configuration`,serverUrl:`Server URL`,serverUrlHint:`Use ldaps:// for SSL or ldap:// with StartTLS`,security:`Security`,securityHint:`StartTLS upgrades a plain connection to TLS. LDAPS uses TLS from the start.`,bindDn:`Bind DN (Service Account)`,bindPassword:`Bind Password`,searchBase:`Search Base DN`,userFilter:`User Search Filter`,userFilterHint:`{username} is replaced with the login username. Use (uid={username}) for OpenLDAP.`,advanced:`Advanced`,autoProvision:`Auto-provision users`,autoProvisionHint:`Automatically create a BamBuddy account on first LDAP login`,defaultGroup:`Default group`,defaultGroupNone:`— None (no fallback) —`,defaultGroupHint:`Fallback group assigned when an LDAP user authenticates but is not listed in any mapped LDAP group. Leave empty to leave unmapped users without permissions.`,groupMapping:`Group Mapping (JSON)`,groupMappingHint:`Map LDAP group DNs to BamBuddy groups. Available groups: `,testConnection:`Test Connection`,settingsSaved:`LDAP settings saved`,errors:{serverRequired:`LDAP server URL is required`,searchBaseRequired:`Search base DN is required`,enableAuthFirst:`Enable authentication first`,configureLdapFirst:`Save LDAP settings first`}},email:{smtpSettings:`SMTP Configuration`,smtpHost:`SMTP Server`,smtpPort:`SMTP Port`,security:`Security`,authentication:`Authentication`,username:`Username`,password:`Password`,fromEmail:`From Email`,fromName:`From Name`,testConnection:`Test SMTP Connection`,testRecipient:`Test Recipient Email`,sendTest:`Send Test Email`,sending:`Sending...`,save:`Save Settings`,saving:`Saving...`,advancedAuth:`Advanced Authentication`,advancedAuthEnabled:`Advanced Authentication is enabled`,advancedAuthEnabledDesc:`Email-based user management features are active. New users will receive auto-generated passwords via email, and users can reset their passwords through the forgot password feature.`,advancedAuthDisabled:`Advanced Authentication is disabled`,advancedAuthDisabledDesc:`Enable advanced authentication to activate email-based features for user management.`,enable:`Enable`,disable:`Disable`,feature1:`Passwords are auto-generated and emailed to new users`,feature2:`Users can login with username or email`,feature3:`Forgot password feature is available`,feature4:`Admins can reset user passwords via email`,errors:{requiredFields:`Please fill in all required fields`,usernameRequired:`Username is required when authentication is enabled`,enterTestEmail:`Please enter a test email address`,smtpServerAndEmail:`Please fill in SMTP Server and From Email before testing`,usernamePasswordRequired:`Username and Password are required when authentication is enabled`,configureSmtpFirst:`Please configure and test SMTP settings first`,enableAuthFirst:`Please enable authentication first to use email-based features.`},success:{settingsSaved:`SMTP settings saved successfully`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`None (Port 25)`},authOptions:{enabled:`Enabled`,disabled:`Disabled`}},appearance:`Appearance`,notifications:`Notifications`,smartPlugs:`Smart Plugs`,spoolman:`Spoolman`,updates:`Updates`,language:`Language`,languageDescription:`Select your preferred language`,theme:`Theme`,themeLight:`Light`,themeDark:`Dark`,themeSystem:`System`,defaultView:`Default View`,defaultViewDescription:`Page to show when opening the app`,checkForUpdates:`Check for Updates`,autoUpdate:`Auto Update`,currentVersion:`Current Version`,latestVersion:`Latest Version`,upToDate:`You are up to date`,updateAvailable:`Update available`,notificationLanguage:`Notification Language`,notificationLanguageDescription:`Language for push notifications`,bedCooledThreshold:`Bed Cooled Threshold`,bedCooledThresholdDescription:`Temperature below which the bed is considered cooled after a print`,userNotificationsEnabled:`User Notifications`,userNotificationsEnabledDescription:`Enable the user notifications menu and email notifications for print job events. Requires Advanced Authentication.`,userNotificationsDisabledHint:`Enable Advanced Authentication to use user notifications.`,notificationProviders:`Notification Providers`,addProvider:`Add Provider`,editProvider:`Edit Provider`,providerType:`Provider Type`,testNotification:`Test Notification`,testSuccess:`Test notification sent successfully`,testFailed:`Failed to send test notification`,quietHours:`Quiet Hours`,quietHoursDescription:`Do not disturb during these hours`,quietHoursStart:`Start`,quietHoursEnd:`End`,events:{title:`Notification Events`,printStart:`Print Started`,printComplete:`Print Completed`,printFailed:`Print Failed`,printStopped:`Print Stopped`,printProgress:`Progress Milestones`,printProgressDescription:`Notify at 25%, 50%, 75%`,printerOffline:`Printer Offline`,printerError:`Printer Error`,filamentLow:`Low Filament`,maintenanceDue:`Maintenance Due`,maintenanceDueDescription:`Notify when maintenance is needed`},smartPlug:{title:`Smart Plugs`,add:`Add Smart Plug`,edit:`Edit Smart Plug`,name:`Name`,ipAddress:`IP Address`,linkedPrinter:`Linked Printer`,autoOn:`Auto Power On`,autoOnDescription:`Turn on when print starts`,autoOff:`Auto Power Off`,autoOffDescription:`Turn off after print completes`,offDelay:`Off Delay`,offDelayMinutes:`Minutes after print`,offDelayTemp:`When nozzle below temperature`,currentState:`Current State`,turnOn:`Turn On`,turnOff:`Turn Off`},filamentTracking:`Filament Tracking`,filamentTrackingDesc:`Choose how to track your filament spools. You can use the built-in inventory or connect an external Spoolman server.`,filamentChecks:`Filament checks`,disableFilamentWarnings:`Disable filament warnings`,disableFilamentWarningsDesc:`Don't show warnings about insufficient filament when printing or queueing`,preferLowestFilament:`Prefer lowest remaining filament`,preferLowestFilamentDesc:`When multiple spools match, use the one with the least filament remaining`,preferLowestFilamentBackupNote:`Only takes effect when AMS Filament Backup is enabled on the printer — otherwise the printer cannot switch to a second spool when the picked one runs out.`,trackingModeBuiltIn:`Built-in Inventory`,trackingModeBuiltInDesc:`RFID auto-matching and usage tracking included`,trackingModeSpoolmanDesc:`External filament management server`,builtInFeatureRfid:`Automatically detects Bambu Lab RFID spools in AMS`,builtInFeatureUsage:`Tracks filament consumption per print`,builtInFeatureCatalog:`Manage spools, colors, and K-factor profiles`,builtInFeatureThirdParty:`Third-party spools can be assigned to inventory spools`,amsSyncButton:`Sync Weights from AMS`,amsSyncTitle:`Sync Spool Weights from AMS`,amsSyncMessage:`This will overwrite all inventory spool weights with the current AMS remain% values from connected printers. Use this to recover from corrupted weight data. Printers must be online.`,amsSyncing:`Syncing...`,amsSyncSuccess:`{{synced}} spool(s) synced, {{skipped}} skipped`,amsSyncError:`Failed to sync weights from AMS`,spoolmanAmsSyncButton:`Sync Spoolman Weights from AMS`,spoolmanAmsSyncTitle:`Sync Spoolman Spool Weights from AMS`,spoolmanAmsSyncMessage:`This will update all Spoolman spool weights based on the current AMS remain% values from connected printers. Printers must be online.`,spoolmanAmsSyncing:`Syncing...`,spoolmanAmsSyncSuccess:`{{synced}} spool(s) synced, {{skipped}} skipped`,spoolmanAmsSyncError:`Failed to sync Spoolman weights from AMS`,spoolmanAmsSyncErrorUnreachable:`Failed to sync Spoolman weights (Spoolman unreachable)`,spoolmanAmsSyncErrorNotConfigured:`Failed to sync Spoolman weights (Spoolman not configured)`,spoolmanNotConfigured:`Spoolman not configured`,spoolmanFilamentCatalogTitle:`Spoolman Filament Catalog`,spoolmanFilamentCatalogDesc:`Filament names and tare weights from your Spoolman instance. Name and spool weight are editable here; all other properties are managed directly in Spoolman.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`URL of your Spoolman server (e.g., http://localhost:7912)`,spoolmanConnected:`Connected`,spoolmanDisconnected:`Disconnected`,status:`Status`,connect:`Connect`,disconnect:`Disconnect`,howSyncWorks:`How Sync Works`,syncInfoRfidOnly:`Only official Bambu Lab spools with RFID are synced`,syncInfoAutoCreate:`New spools are auto-created in Spoolman on first sync`,syncInfoThirdPartySkipped:`Non-Bambu Lab spools (third-party, refilled) are skipped`,linkingExistingSpools:`Linking Existing Spools`,linkingExistingSpoolsDesc:`To link existing Spoolman spools to your AMS, hover over an AMS slot and click "Link to Spoolman".`,syncMode:`Sync Mode`,syncModeAuto:`Automatic`,syncModeManual:`Manual Only`,syncModeAutoDesc:`AMS data syncs automatically when changes are detected`,syncModeManualDesc:`Only sync when manually triggered`,syncAmsData:`Sync AMS Data`,syncAmsDataDesc:`Manually sync printer AMS data to Spoolman`,allPrinters:`All Printers`,noDefaultPrinter:`No default (ask each time)`,sidebarOrder:`Sidebar order`,saveThumbnails:`Save thumbnails`,captureFinishPhoto:`Capture finish photo`,noPrintersConfigured:`No printers configured`,archiveMode:{always:`Always create archive entry`,never:`Never create archive entry`,ask:`Ask each time`},checkForUpdatesLabel:`Check for updates`,checkPrinterFirmware:`Check printer firmware`,includeBetaUpdates:`Include beta versions`,includeBetaUpdatesDesc:`Notify about beta and prerelease versions when checking for updates`,enableRetry:`Enable retry`,homeAssistantDescription:`Control smart plugs via Home Assistant`,environmentManagedLabel:`(Environment Managed)`,autoEnabledViaEnv:`Automatically enabled via environment variables`,urlFromEnvReadOnly:`Value set by HA_URL environment variable (read-only)`,tokenFromEnvReadOnly:`Value set by HA_TOKEN environment variable (read-only)`,mqttConnectedTo:`Connected to`,prometheusDescription:`Expose printer data in Prometheus format`,noSmartPlugsTitle:`No smart plugs configured`,noSmartPlugsDescription:`Add a Tasmota-based smart plug to track energy usage and automate power control.`,noProvidersTitle:`No providers configured`,noProvidersDescription:`Add a provider to receive alerts.`,noTemplatesAvailable:`No templates available. Restart the backend to seed default templates.`,apiPermissionView:`View printer status and queue`,apiPermissionEdit:`Add and remove items from print queue`,apiKeysEmptyTitle:`No API keys`,apiKeysEmptyDescription:`Create an API key to integrate with external services.`,noUsersFound:`No users found`,noGroupsFound:`No groups found`,noGroupsAvailable:`No groups available`,passwordsDoNotMatch:`Passwords do not match`,systemGroupWarning:`System group names cannot be changed`,authDisabledTitle:`Authentication is Disabled`,authDisabledFeature1:`Require login to access the system`,authDisabledFeature2:`Create multiple users with group-based permissions`,authDisabledFeature3:`Control access with 50+ granular permissions`,userHasCreated:`This user has created:`,userItemsQuestion:`What would you like to do with these items?`,deleteUserConfirm:`Are you sure you want to delete this user?`,actionCannotBeUndone:`This action cannot be undone.`,addFirstSmartPlug:`Add Your First Smart Plug`,providers:`Providers`,log:`Log`,testAll:`Test All`,testResults:`Test Results`,testPassedCount:`{{count}} passed`,testFailedCount:`{{count}} failed`,messageTemplates:`Message Templates`,messageTemplatesDescription:`Customize notification messages for each event.`,apiKeys:`API Keys`,apiKeysDescription:`Create API keys for external integrations and webhooks.`,createKey:`Create Key`,apiKeyCreated:`API Key Created Successfully`,apiKeyCopyWarning:`Copy this key now - it won't be shown again!`,useInApiBrowser:`Use in API Browser`,apiKeyQrButton:`QR code`,apiKeyQrTitle:`Scan to configure`,apiKeyQrCaption:`Scan with your mobile app to add this server and API key.`,apiKeyQrWarning:`Contains your secret API key — don't share or screenshot it where others can see.`,createNewApiKey:`Create New API Key`,keyName:`Key Name`,keyNamePlaceholder:`e.g., Home Assistant, OctoPrint`,readStatus:`Read Status`,readStatusDescription:`View printer status and queue`,manageQueue:`Manage Queue`,manageQueueDescription:`Add and remove items from print queue`,controlPrinter:`Control Printer`,controlPrinterDescription:`Pause, resume, and stop prints`,manageLibrary:`Manage Library`,manageLibraryDescription:`Upload, rename, and delete library files; import models from MakerWorld`,manageInventory:`Manage Inventory`,manageInventoryDescription:`Create, update, and delete spools and inventory records. Required for SpoolBuddy kiosks (NFC scan, scale readings, kiosk system commands).`,libraryBadge:`Library`,inventoryBadge:`Inventory`,cloudAccess:`Allow cloud access`,cloudAccessDescription:`Read Bambu Cloud presets and filaments on your behalf. Requires you to be signed into Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Update electricity price`,updateEnergyCostDescription:`Allow this key to POST a new per-kWh electricity price to /settings/electricity-price. Useful for Home Assistant dynamic-tariff automations (Tibber, Octopus, etc.). This is the only settings field writable via API key.`,energyCostBadge:`Energy`,legacyKey:`Legacy`,legacyKeyTooltip:`Created before per-user ownership; recreate to use cloud access`,unnamedKey:`Unnamed Key`,lastUsed:`Last used`,read:`Read`,control:`Control`,createFirstKey:`Create Your First Key`,webhookEndpoints:`Webhook Endpoints`,webhookApiKeyHint:`Use your API key in the X-API-Key header.`,webhook:{getAllStatus:`Get all printer status`,getSpecificStatus:`Get specific printer status`,addToQueue:`Add to print queue`,pausePrint:`Pause print`,resumePrint:`Resume print`,stopPrint:`Stop print`},apiBrowser:`API Browser`,apiBrowserDescription:`Explore and test all available API endpoints.`,apiKeyForTesting:`API Key for Testing`,apiKeyPlaceholder:`Paste your API key here to test authenticated endpoints...`,apiKeyHint:`This key will be sent as X-API-Key header with requests.`,deleteApiKeyTitle:`Delete API Key`,deleteApiKeyMessage:`Are you sure you want to delete this API key? Any integrations using this key will stop working.`,deleteKey:`Delete Key`,amsDisplayThresholds:`AMS Display Thresholds`,amsThresholdsDescription:`Configure color thresholds for AMS humidity and temperature indicators.`,humidity:`Humidity`,goodGreen:`Good (green)`,fairOrange:`Fair (orange)`,aboveFairBad:`Above fair threshold shows as red (bad)`,fairAlsoDryingThreshold:`This threshold is also used to trigger auto-drying when enabled`,temperature:`Temperature`,goodBlue:`Good (blue)`,aboveFairHot:`Above fair threshold shows as red (hot)`,historyRetention:`History Retention`,keepSensorHistory:`Keep sensor history for`,historyRetentionDescription:`Older humidity and temperature data will be automatically deleted`,defaultPrintOptions:`Default Print Options`,defaultPrintOptionsDescription:`Set default values for print options when starting new prints. These can be overridden per print in the print dialog.`,defaultBedLevelling:`Bed Levelling`,defaultBedLevellingDesc:`Auto-level bed before print`,defaultFlowCali:`Flow Calibration`,defaultFlowCaliDesc:`Calibrate extrusion flow`,defaultVibrationCali:`Vibration Calibration`,defaultVibrationCaliDesc:`Reduce ringing artifacts`,defaultLayerInspect:`First Layer Inspection`,defaultLayerInspectDesc:`AI inspection of first layer`,defaultTimelapse:`Timelapse`,defaultTimelapseDesc:`Record timelapse video`,defaultNozzleOffsetCali:`Nozzle Offset Calibration`,defaultNozzleOffsetCaliDesc:`Calibrate nozzle offsets between extruders`,tempFanPresetsTitle:`Temperature & Fan Presets`,tempFanPresetsDescription:`Customize the quick-select values shown in printer-card temperature and fan-speed popovers. The Off button is always shown.`,tempFanPresetsNozzle:`Nozzle temperature`,tempFanPresetsBed:`Bed temperature`,tempFanPresetsChamber:`Chamber temperature`,tempFanPresetsFan:`Fan speed`,tempFanPresetsReset:`Reset to defaults`,staggeredStart:`Staggered Start`,staggeredStartDescription:`Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.`,plateClear:`Plate-Clear Confirmation`,requirePlateClear:`Require plate-clear confirmation`,requirePlateClearDescription:`When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disabling this also hides the plate status badge and the "Mark plate as cleared" button on printer cards.`,gcodeInjection:`G-code Injection`,gcodeInjectionDescription:`Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.`,gcodeInjectionNoPrinters:`No printers found. Add printers to configure G-code snippets.`,gcodeStartLabel:`Start G-code`,gcodeEndLabel:`End G-code`,gcodeStartPlaceholder:`G-code prepended before the print starts...`,gcodeEndPlaceholder:`G-code appended after the print ends...`,staggerGroupSize:`Group size`,staggerGroupSizeHelp:`Printers to start simultaneously per group`,staggerInterval:`Interval (minutes)`,staggerIntervalHelp:`Delay between each group starting`,queueDrying:`Queue Auto-Drying`,queueDryingDescription:`Automatically dry AMS filament when printer is idle between queued prints. Uses humidity threshold above to trigger drying.`,queueDryingEnabled:`Enable auto-drying`,queueDryingEnabledDescription:`Start AMS drying automatically when printer is idle and humidity is above threshold`,queueDryingBlock:`Wait for drying to complete`,queueDryingBlockDescription:`Block the print queue until drying finishes. When off, prints take priority over drying.`,ambientDryingEnabled:`Ambient drying`,ambientDryingEnabledDescription:`Automatically dry filament on idle printers when humidity exceeds threshold, even without queued prints.`,dryingPresets:`Drying Presets`,dryingPresetsDescription:`Temperature and duration per filament type. AMS 2 Pro uses lower temps, AMS-HT supports higher temps.`,dryingFilament:`Filament`,humidityThresholds:`Humidity Thresholds`,humidityThresholdsDescription:`Per-filament humidity trigger for auto-drying and alarms. Mixed loads in one AMS use the lowest threshold.`,humidityThresholdCol:`Threshold`,humidityThresholdDefault:`Default (unknown types)`,printModal:`Print Modal`,expandCustomMapping:`Expand custom mapping by default`,expandCustomMappingDescription:`When printing to multiple printers, show per-printer AMS mapping expanded`,authentication:`Authentication`,authEnabledDescription:`Your instance is secured with user authentication`,authDisabledDescription:`Enable to require login and manage user access`,authDisabledMessage:`Enable authentication to create user accounts, manage permissions, and secure your Bambuddy instance.`,enableAuthentication:`Enable Authentication`,currentUser:`Current User`,changePassword:`Change Password`,admin:`Admin`,users:`Users`,addUser:`Add User`,groups:`Groups`,addGroup:`Add Group`,system:`System`,noDescription:`No description`,userCount:`{{count}} users`,permissionCount:`{{count}} permissions`,createUser:`Create User`,username:`Username`,enterUsername:`Enter username`,password:`Password`,enterPassword:`Enter password`,passwordRequirements:`At least 8 characters, with one uppercase, one lowercase, one digit, and one special character.`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Confirm password`,viewReleaseOnGitHub:`View release on GitHub`,turnAllPlugsOn:`Turn all plugs on`,turnAllPlugsOff:`Turn all plugs off`,clearNotificationLogs:`Clear Notification Logs`,clearLogsMessage:`This will permanently delete all notification logs older than 30 days. This action cannot be undone.`,clearLogs:`Clear Logs`,resetUiPreferences:`Reset UI Preferences`,resetUiPreferencesMessage:`This will reset all UI preferences to defaults: sidebar order, theme, dashboard layout, view modes, and sorting preferences. Your printers, archives, and server settings will NOT be affected. The page will reload after clearing.`,resetPreferences:`Reset Preferences`,deleteGroupTitle:`Delete Group`,deleteGroupMessage:`Are you sure you want to delete this group? Users in this group will lose these permissions.`,deleteGroup:`Delete Group`,disableAuthenticationTitle:`Disable Authentication`,disableAuthenticationMessage:`Are you sure you want to disable authentication? This will make your Bambuddy instance accessible without login. All users will remain in the database but authentication will be disabled.`,disableAuthentication:`Disable Authentication`,configureBambuddy:`Configure Bambuddy`,systemDefault:`System Default`,archiveSettings:`Archive Settings`,newWindow:`New Window`,embeddedOverlay:`Embedded Overlay`,preferredSlicer:`Preferred Slicer`,preferredSlicerDescription:`Slicer used for in-app slicing via the API sidecar`,openInSlicerLabel:`Open in Slicer`,openInSlicerInherit:`Same as API slicer`,openInSlicerDescription:`Desktop slicer used by the 'Open in Slicer' button. Leave on 'Same as API slicer' to inherit, or pick a different slicer to use locally.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.`,useSlicerApi:`Use Slicer API`,useSlicerApiDescription:`When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerApiUrlDescription:`URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.`,slicerBundlesRemoved:{title:`Slicer Bundles (removed)`,description:`Printer Preset Bundle (.bbscfg) import was removed. BambuStudio's bundle export only includes user-customised presets, so the import never delivered standard processes / filaments and slicing fell back to embedded settings.`,alternatives:`Use Single Preset Import for individual customs, or sync via Bambu Cloud / Orca Cloud. Stock presets come from the slicer sidecar automatically.`,lookupOrder:`Slice-time preset lookup order: 1) Imported (local), 2) Orca Cloud, 3) Bambu Cloud, 4) Standard (sidecar fallback).`},externalCameras:`External Cameras`,costTracking:`Cost Tracking`,printsOnly:`Prints Only`,totalConsumption:`Total Consumption`,dataManagement:`Data Management`,storageUsage:`Storage Usage`,storageUsageDescription:`Breakdown of data usage by category`,storageUsageTotal:`Total`,storageUsageErrors:`Errors`,storageUsageOtherBreakdown:`Other (includes static assets, scripts, and configuration files)`,storageUsageSystem:`System`,storageUsageData:`Data`,storageUsageUnavailable:`Storage usage information unavailable`,clearNotificationLogsDescription:`Delete notification logs older than 30 days`,resetUiPreferencesDescription:`Reset sidebar order, theme, view modes, and layout preferences. Printers, archives, and settings are not affected.`,enableHomeAssistant:`Enable Home Assistant`,enableMqtt:`Enable MQTT`,useTls:`Use TLS`,enableMetricsEndpoint:`Enable Metrics Endpoint`,availableMetrics:`Available Metrics`,editUser:`Edit User`,deleteUserTitle:`Delete User`,groupName:`Group Name`,leaveEmptyForAnonymous:`Leave empty for anonymous`,leaveEmptyForNoAuth:`Leave empty for no authentication`,enterNewPassword:`Enter new password`,confirmNewPassword:`Confirm new password`,enterGroupName:`Enter group name`,enterDescriptionOptional:`Enter description (optional)`,enterCurrentPassword:`Enter current password`,enterNewPasswordMin6:`Enter new password (min 6 characters)`,toast:{keyCopied:`Key copied to clipboard`,copyFailed:`Failed to copy key`,keyAddedToBrowser:`Key added to API Browser`,clearLogsFailed:`Failed to clear logs`,uiPreferencesReset:`UI preferences reset. Refreshing...`,authDisabled:`Authentication disabled successfully`,authDisableFailed:`Failed to disable authentication`,apiKeyCreated:`API key created`,apiKeyDeleted:`API key deleted`,userCreated:`User created successfully`,userUpdated:`User updated successfully`,userDeleted:`User deleted successfully`,groupCreated:`Group created successfully`,groupUpdated:`Group updated successfully`,groupDeleted:`Group deleted successfully`,fillRequiredFields:`Please fill in all required fields`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 8 characters`,passwordNeedsUppercase:`Password must contain at least one uppercase letter`,passwordNeedsLowercase:`Password must contain at least one lowercase letter`,passwordNeedsDigit:`Password must contain at least one digit`,passwordNeedsSpecial:`Password must contain at least one special character`,enterGroupName:`Please enter a group name`,settingsSaved:`Settings saved`,noPermissionUpdate:`You do not have permission to change settings`,cameraSettingsSaved:`Camera settings saved`,enterCameraUrl:`Please enter a camera URL`,passwordChanged:`Password changed successfully`,connectionFailed:`Connection failed`,testFailed:`Test failed`,cameraConnected:`Camera connected{{resolution}}`},testConnection:`Test Connection`,catalog:{spoolCatalog:`Spool Catalog`,spoolCatalogDescription:`Empty spool weights by brand/type. Used for automatic weight lookup when adding spools.`,searchCatalog:`Search catalog...`,addNewEntry:`Add New Entry`,namePlaceholder:`Name (e.g., Bambu Lab - Plastic)`,weight:`Weight`,type:`Type`,default:`Default`,custom:`Custom`,noMatch:`No entries match your search`,empty:`No entries in catalog`,deleteEntry:`Delete Entry`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,resetCatalog:`Reset Catalog`,resetConfirm:`Reset catalog to defaults? This will remove all custom entries.`,loadFailed:`Failed to load spool catalog`,nameWeightRequired:`Name and weight are required`,entryAdded:`Entry added`,addFailed:`Failed to add entry`,entryUpdated:`Entry updated`,updateFailed:`Failed to update entry`,entryDeleted:`Entry deleted`,deleteFailed:`Failed to delete entry`,resetSuccess:`Catalog reset to defaults`,resetFailed:`Failed to reset catalog`,exported:`Exported {{count}} entries`,imported:`Imported {{added}} entries ({{skipped}} skipped)`,importFailed:`Failed to import: invalid JSON format`,exportTooltip:`Export catalog to JSON`,importTooltip:`Import catalog from JSON`,resetTooltip:`Reset to defaults`,selectedCount:`{{count}} selected`,deleteSelected:`Delete Selected`,bulkDeleteConfirm:`Are you sure you want to delete {{count}} entries?`,bulkDeleted:`Deleted {{count}} entries`,bulkDeleteFailed:`Failed to delete entries`,material:`Material`,spoolWeight:`Spool Weight`,color:`Color`,updateSpoolWeight:`Update Spool Weight`,filamentUpdated:`Filament updated`,filamentUpdateFailed:`Failed to update filament`,filamentUpdateInvalid:`Invalid filament data`,keepExistingSpoolWeight:`Keep old weight for existing spools`,keepExistingSpoolWeightDesc:`Spools already created with this filament type retain the old tare weight. New spools use the updated value.`,applyToAllSpools:`Apply to all spools`,applyToAllSpoolsDesc:`All weight calculations for this filament type immediately use the new tare weight.`},colorCatalog:{title:`Color Catalog`,description:`Filament colors by manufacturer/material. Used for automatic color lookup when adding spools.`,searchColors:`Search colors...`,allManufacturers:`All manufacturers`,addNewColor:`Add New Color`,manufacturer:`Manufacturer`,colorName:`Color Name`,hex:`Hex`,materialOptional:`Material (optional)`,showing:`Showing {{filtered}} of {{total}} colors`,noMatch:`No colors match your search`,empty:`No colors in catalog`,deleteColor:`Delete Color`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,resetCatalog:`Reset Color Catalog`,resetConfirm:`Reset catalog to defaults? This will remove all custom colors.`,sync:`Sync`,starting:`Starting...`,syncTooltip:`Sync from FilamentColors.xyz (2000+ colors, may take a minute)`,loadFailed:`Failed to load color catalog`,fieldsRequired:`Manufacturer, color name, and hex color are required`,colorAdded:`Color added`,addFailed:`Failed to add color`,colorUpdated:`Color updated`,updateFailed:`Failed to update color`,colorDeleted:`Color deleted`,deleteFailed:`Failed to delete color`,resetSuccess:`Color catalog reset to defaults`,resetFailed:`Failed to reset catalog`,syncUpToDate:`Already up to date ({{count}} colors checked)`,syncComplete:`Added {{added}} new colors ({{skipped}} already existed)`,syncError:`Sync error`,syncFailed:`Failed to sync from FilamentColors.xyz`,exported:`Exported {{count}} colors`,imported:`Imported {{added}} colors ({{skipped}} skipped)`,importFailed:`Failed to import: invalid JSON format`,selectedCount:`{{count}} selected`,deleteSelected:`Delete Selected`,bulkDeleteConfirm:`Are you sure you want to delete {{count}} colors?`,bulkDeleted:`Deleted {{count}} colors`,bulkDeleteFailed:`Failed to delete colors`},dateFormat:`Date Format`,dateFormatUs:`US (MM/DD/YYYY)`,dateFormatEu:`EU (DD/MM/YYYY)`,dateFormatIso:`ISO (YYYY-MM-DD)`,timeFormat:`Time Format`,timeFormat12:`12-hour (3:30 PM)`,timeFormat24:`24-hour (15:30)`,defaultPrinter:`Default Printer`,defaultPrinterDescription:`Pre-select this printer for uploads, reprints, and other operations.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Use Sidebar to reorder items, reset visibility, and manage custom links.`,setDefault:`Set Default`,sidebarOrderSetDefaultHint:`Set default applies the current menu order to users who haven't customized theirs.`,sidebarDefaultSet:`Default menu order has been set.`,sidebarDefaultCleared:`Default menu order cleared.`,sidebarDefaultFailed:`Failed to set default menu order.`,reset:`Reset`,darkMode:`Dark Mode`,lightMode:`Light Mode`,active:`(active)`,background:`Background`,accent:`Accent`,style:`Style`,bgNeutral:`Neutral`,bgWarm:`Warm`,bgCool:`Cool`,bgOled:`OLED Black`,bgSlate:`Slate Blue`,bgForest:`Forest Green`,accentGreen:`Green`,accentTeal:`Teal`,accentBlue:`Blue`,accentOrange:`Orange`,accentPurple:`Purple`,accentRed:`Red`,styleClassic:`Classic`,styleGlow:`Glow`,styleVibrant:`Vibrant`,themeToggleHint:`Toggle between dark, light, and system mode using the icon in the sidebar.`,autoArchivePrints:`Auto-archive prints`,autoArchiveDescription:`Automatically save 3MF files when prints complete`,saveThumbnailsDescription:`Extract and save preview images from 3MF files`,captureFinishPhotoDescription:`Take a photo from printer camera when print completes. Bambuddy records a brief timelapse during the print so the photo can be sourced from the moment before the bed drops; the timelapse file is kept if you enabled timelapse for this print, otherwise it is deleted automatically after the photo is captured.`,ffmpegNotInstalled:`ffmpeg not installed`,ffmpegRequired:`Camera capture requires ffmpeg. Install it via brew install ffmpeg (macOS) or apt install ffmpeg (Linux).`,camera:`Camera`,cameraViewMode:`Camera View Mode`,cameraOverlayDescription:`Camera opens in a resizable overlay on the main screen`,cameraWindowDescription:`Camera opens in a separate browser window`,externalCamerasDescription:`Configure external cameras to replace the built-in printer camera. Supports MJPEG streams, RTSP, HTTP snapshots, and USB cameras (V4L2). When enabled, the external camera is used for live view and finish photos.`,cameraPlaceholderUsb:`Device path (/dev/video0)`,cameraPlaceholderUrl:`Camera URL (rtsp://... or http://...)`,cameraTypeMjpeg:`MJPEG Stream`,cameraTypeRtsp:`RTSP Stream`,cameraTypeSnapshot:`HTTP Snapshot`,cameraTypeUsb:`USB Camera (V4L2)`,cameraSnapshotUrl:`Snapshot URL (optional)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`Single-frame URL used for notification thumbnails, finish photos, layer-timelapse frames, and plate detection. Timelapse and plate detection each require their own per-printer toggle — this URL is just the image source they pull from when active. Leave blank to capture from the live stream above. Useful for go2rtc (/api/frame.jpeg) and IP cameras with a dedicated snapshot endpoint.`,cameraRotation:`Rotation`,test:`Test`,connected:`Connected`,disconnected:`Disconnected`,currency:`Currency`,defaultFilamentCost:`Default filament cost (per kg)`,electricityCost:`Electricity cost per kWh`,energyDisplayMode:`Energy display mode`,energyModePrintDescription:`Dashboard shows sum of energy used during prints`,energyModeTotalDescription:`Dashboard shows lifetime energy from smart plugs`,fileManager:`File Manager`,createArchiveEntry:`Create Archive Entry When Printing`,createArchiveEntryDescription:`When printing from File Manager, optionally create an archive entry`,lowDiskSpaceWarning:`Low Disk Space Warning`,lowDiskSpaceDescription:`Show warning when free disk space falls below this threshold`,printerFirmware:`Printer Firmware`,checkFirmwareDescription:`Check for printer firmware updates from Bambu Lab`,bambuddySoftware:`Bambuddy Software`,autoCheckDescription:`Automatically check for new versions on startup`,checkNow:`Check now`,updateAvailableVersion:`Update available: v{{version}}`,releaseNotes:`Release Notes`,updateViaDocker:`Update via Docker Compose:`,updateViaHomeAssistant:`Updates are managed by the Home Assistant Supervisor. Open Settings → Add-ons → Bambuddy in Home Assistant to install the new version.`,updateViaWindowsInstaller:`Windows installations are updated by re-running the installer. Download the new version below — your data, settings and printers are preserved.`,downloadWindowsInstaller:`Download installer for v{{version}}`,installUpdate:`Install Update`,latestVersionRunning:`You're running the latest version`,failedToCheckUpdates:`Failed to check for updates: {{error}}`,backupRestore:`Backup & Restore`,backupRestoreDescription:`Export/import settings and configure GitHub backup`,goToBackup:`Go to Backup`,externalUrl:`External URL`,externalUrlDescription:`The external URL where Bambuddy is accessible. Used for notification images and external integrations.`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`Include protocol and port (e.g., http://192.168.1.100:8000)`,ftpRetry:`FTP Retry`,ftpRetryDescription:`Retry FTP operations when printer WiFi is unreliable. Applies to 3MF downloads, print uploads, timelapse downloads, and firmware updates.`,autoRetryDescription:`Automatically retry failed FTP operations`,retryAttempts:`Retry attempts`,retryDelay:`Retry delay`,connectionTimeout:`Connection timeout`,time_one:`{{count}} time`,time_other:`{{count}} times`,second_one:`{{count}} second`,second_other:`{{count}} seconds`,nSeconds:`{{count}} seconds`,increaseForWeakWifi:`Increase for printers with weak WiFi`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Connect to Home Assistant to control smart plugs via HA's REST API. Supports switch, light, input_boolean, and script entities.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`Long-Lived Access Token`,haTokenHint:`Create a token in HA: Profile → Long-Lived Access Tokens → Create Token`,connectionSuccessful:`Connection Successful`,connectionFailed:`Connection Failed`,haConnectionSuccess:`Successfully connected to Home Assistant.`,haConnectionFailed:`Failed to connect to Home Assistant.`,mqttPublishing:`MQTT Publishing`,mqttDescription:`Publish BamBuddy events to an external MQTT broker for integration with Node-RED, Home Assistant, and other automation systems.`,mqttEnableDescription:`Publish events to external MQTT broker`,brokerHostname:`Broker hostname`,port:`Port`,usernameOptional:`Username (optional)`,passwordOptional:`Password (optional)`,topicPrefix:`Topic prefix`,topicPrefixHint:`Topics will be: {{prefix}}/printers//status, etc.`,prometheusMetrics:`Prometheus Metrics`,prometheusEndpointDescription:`Expose printer metrics at /api/v1/metrics for Prometheus/Grafana monitoring.`,bearerTokenOptional:`Bearer Token (optional)`,bearerTokenHint:`If set, requests must include Authorization: Bearer `,metricsConnectionStatus:`Connection status`,metricsPrinterState:`Printer state (idle/printing/etc)`,metricsPrintProgress:`Print progress 0-100%`,metricsBedTemp:`Bed temperature`,metricsNozzleTemp:`Nozzle temperature`,metricsPrintsTotal:`Total prints by result`,metricsMore:`...and more (layers, fans, queue, filament usage)`,smartPlugsDescription:`Connect smart plugs (Tasmota or Home Assistant) to automate power control and track energy usage for your printers.`,allOn:`All On`,allOff:`All Off`,addSmartPlug:`Add Smart Plug`,energySummary:`Energy Summary`,currentPower:`Current Power`,plugsOnline:`{{reachable}}/{{total}} plugs online`,today:`Today`,yesterday:`Yesterday`,total:`Total`,enablePlugsForSummary:`Enable plugs to see energy summary`,addNotificationProvider:`Add`,systemBadge:`(System)`,creating:`Creating...`,changing:`Changing...`,deleteUserAndItems:`Delete user AND their items`,deleteUserKeepItems:`Delete user, keep items (become ownerless)`,ok:`OK`,twoFa:{totpTitle:`Authenticator App (TOTP)`,totpDesc:`Use an authenticator app like Google Authenticator, Aegis or Authy.`,emailOtpTitle:`Email OTP`,emailOtpDesc:`Send a one-time code to {{email}} when you log in.`,emailOtpNoEmail:`Add an email address to your account to enable this method.`,addEmailFirst:`Your account has no email address. Ask an admin to add one before enabling Email OTP.`,setupTotp:`Set up Authenticator App`,setupAuthApp:`Set up Authenticator App`,setupInstructions:`Scan the QR code below with your authenticator app, then confirm with a code.`,manualEntry:`Can't scan? Enter this secret manually:`,scannedContinue:`I've scanned the code — continue`,enterCodeToConfirm:`Enter the 6-digit code from your authenticator app to confirm setup.`,activate:`Activate`,disableTotp:`Disable Authenticator`,disableConfirmHint:`Enter a valid TOTP code or a backup code to disable the authenticator.`,totpDisabled:`Authenticator app disabled.`,emailOtpEnabled:`Email OTP enabled.`,emailOtpDisabled:`Email OTP disabled.`,smtpRequired:`Please configure and test SMTP settings first.`,invalidCode:`Invalid code. Please try again.`,enableEmailOtp:`Enable Email OTP`,disableEmailOtp:`Disable Email OTP`,emailSetupEnterCode:`A verification code has been sent to your email address. Enter it below to confirm you own this inbox.`,verifyAndEnable:`Verify & Enable`,emailDisablePasswordHint:`Enter your account password to confirm disabling email OTP.`,passwordPlaceholder:`Enter your password`,backupCodesTitle:`Save your backup codes`,backupCodesWarning:`Save these codes somewhere safe. Each code can only be used once and they will not be shown again.`,backupCodesRemaining:`{{count}} backup codes remaining`,savedCodes:`I've saved my codes`,regenBackup:`Regenerate Backup Codes`,regenBackupHint:`Enter your current TOTP code to generate 10 new backup codes. All existing backup codes will be invalidated.`,newBackupCodes:`New backup codes`,linkedAccounts:`Linked SSO Accounts`,linkedAccountsDesc:`These external identity providers are linked to your account.`,oidcUnlinked:`Account unlinked.`},sessionPolicy:{title:`Session Policy`,description:`Maximum session lifetime for new user logins. Already-issued tokens keep their original expiry.`,preset24h:`24 hours`,preset7d:`7 days`,preset30d:`30 days`,customHoursLabel:`Custom session lifetime in hours`,hoursSuffix:`hours`,warning:`Longer sessions reduce automatic logout protection. Recommended only for trusted single-user deployments.`},oidc:{title:`SSO / OIDC Providers`,desc:`Configure OpenID Connect providers to allow single sign-on via external identity providers.`,addProvider:`Add Provider`,newProvider:`New Provider`,empty:`No OIDC providers configured yet.`,created:`Provider created.`,updated:`Provider updated.`,deleted:`Provider deleted.`,refreshIcon:`Refresh icon`,removeIcon:`Remove icon`,iconRefreshed:`Icon refreshed.`,iconRemoved:`Icon removed.`,iconFetchFailed:`Icon could not be fetched from the provider URL.`,deleteTitle:`Delete Provider`,deleteMessage:`Delete "{{name}}"? All linked user accounts will be disconnected.`,form:{name:`Display Name`,issuerUrl:`Issuer URL`,clientId:`Client ID`,clientSecret:`Client Secret`,scopes:`Scopes`,iconUrl:`Icon URL (optional)`,enabled:`Enabled`,autoCreate:`Auto-create users`,autoCreateDesc:`Automatically create a local account on first login.`,autoLink:`Auto-link existing accounts`,autoLinkDesc:`Link existing local accounts by matching email on first login.`,secretHint:`leave blank to keep current`,secretPlaceholder:`new secret`,emailClaim:`Email Claim`,emailClaimDesc:`JWT claim used as email identity. Use 'preferred_username' or 'upn' for Azure Entra ID (which does not send email_verified). Only use trusted claim names.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.`,requireEmailVerified:`Require email verified`,requireEmailVerifiedDesc:`Only accept the email claim when the provider marks it as verified.`,requireEmailVerifiedWarning:`Warning: email will be accepted even without verification. Use only with trusted providers.`,requireEmailVerifiedAutoLink:`Disable auto-link first to change this setting.`,defaultGroup:`Default Group`,defaultGroupDesc:`Group assigned to auto-created users. Falls back to Viewers if not set.`,defaultGroupViewersFallback:`Viewers (default)`}},encryption:{title:`MFA Encryption Status`,enabledFromEnv:`At-rest encryption enabled (key from MFA_ENCRYPTION_KEY environment variable)`,enabledFromFile:`At-rest encryption enabled (key loaded from data directory)`,enabledGenerated:`At-rest encryption enabled with auto-generated key`,notConfigured:`At-rest encryption not configured`,notConfiguredDesc:`TOTP secrets and OIDC client_secrets are stored in plaintext. Set MFA_ENCRYPTION_KEY or restart Bambuddy with a writable data directory to auto-generate one.`,allEncrypted:`All MFA secrets are encrypted at rest.`,legacyRowsLabel:`Legacy plaintext rows`,encryptedRowsLabel:`Encrypted rows`,legacyRowsWarning:`{{count}} legacy plaintext row(s) detected. Re-save the OIDC provider or re-enroll the user’s authenticator app to migrate to encrypted storage.`,backupHint:`The auto-generated key is stored at DATA_DIR/.mfa_encryption_key and is included in local backup ZIPs. Keep your backups secure or set MFA_ENCRYPTION_KEY explicitly.`,decryptionBrokenTitle:`Encryption key missing`,decryptionBrokenError:`{{count}} encrypted record(s) cannot be decrypted because the encryption key is no longer available. Restore the previous MFA_ENCRYPTION_KEY or DATA_DIR/.mfa_encryption_key to recover.`,migrationErrorWarning:`{{count}} legacy row(s) failed to re-encrypt at startup. Check server logs and restart Bambuddy to retry.`}},notification:{printStarted:{title:`Print Started`,body:`{{printer}}: {{filename}} has started printing`},printCompleted:{title:`Print Completed`,body:`{{printer}}: {{filename}} completed successfully`},printFailed:{title:`Print Failed`,body:`{{printer}}: {{filename}} has failed`},printStopped:{title:`Print Stopped`,body:`{{printer}}: {{filename}} was stopped`},printProgress:{title:`Print Progress`,body:`{{printer}}: {{filename}} is {{percent}}% complete`},printerOffline:{title:`Printer Offline`,body:`{{printer}} is offline`},printerError:{title:`Printer Error`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Low Filament`,body:`{{printer}}: Filament is running low`},maintenanceDue:{title:`Maintenance Due`,body:`{{printer}}: {{items}} need attention`}},errors:{generic:`Something went wrong`,networkError:`Network error. Please check your connection.`,notFound:`Not found`,unauthorized:`Unauthorized`,serverError:`Server error`,validationError:`Please check your input`,printerConnectionFailed:`Failed to connect to printer`,saveFailed:`Failed to save changes`,deleteFailed:`Failed to delete`,loadFailed:`Failed to load data`},hmsErrors:{title:`Errors - {{name}}`,noErrors:`No errors`,viewOnWiki:`View on Bambu Lab Wiki`,clearInstructions:`Clear errors on the printer to dismiss them here.`,clearErrors:`Clear Errors`,clearSuccess:`HMS errors cleared`,clearFailed:`Failed to clear HMS errors`},mqttDebug:{title:`MQTT Debug Log`,searchPlaceholder:`Search topic or payload...`,noMessages:`No messages logged yet`,startLoggingHint:`Click "Start Logging" to begin capturing MQTT messages`,noMessagesMatch:`No messages match your filter`,adjustFilterHint:`Try adjusting your search or filter criteria`,incoming:`Incoming`,outgoing:`Outgoing`,loggingStopped:`Logging stopped`,loggingActive:`Logging active - messages will auto-refresh`,startLogging:`Start Logging`,stopLogging:`Stop Logging`,clearLog:`Clear Log`,topic:`Topic`,timestamp:`Timestamp`,direction:`Direction`,all:`All`},printerFiles:{title:`File Manager`,storageUsed:`Used:`,storageFree:`Free:`,filterPlaceholder:`Filter files...`,deleteButton:`Delete`,deleteFiles:`Delete {{count}} Files`,deleteFileConfirm:`Delete "{{name}}"? This cannot be undone.`,deleteFilesConfirm:`Delete {{count}} selected files? This cannot be undone.`,noFiles:`No files on printer`,loadingFiles:`Loading files...`,failedToLoad:`Failed to load files`,toast:{filesDeleted:`Deleted {{count}} file(s)`,deleteFailed:`Delete failed: {{error}}`}},confirm:{delete:`Are you sure you want to delete this?`,unsavedChanges:`You have unsaved changes. Are you sure you want to leave?`,clearQueue:`Are you sure you want to clear the queue?`},login:{title:`Bambuddy Login`,subtitle:`Sign in to your account`,username:`Username`,usernamePlaceholder:`Enter your username`,usernameOrEmail:`Username or Email`,usernameOrEmailPlaceholder:`Username or @ Email`,password:`Password`,passwordPlaceholder:`Enter your password`,signIn:`Sign in`,signingIn:`Logging in...`,rememberMe:`Remember Me`,forgotPassword:`Forgot your password?`,loginSuccess:`Logged in successfully`,loginFailed:`Login failed`,enterCredentials:`Please enter username and password`,enterEmail:`Please enter your email address`,oidcLoginFailed:`OIDC login failed`,oidcErrors:{providerError:`The identity provider returned an error`,missingParameters:`OIDC callback is missing required parameters`,invalidState:`OIDC state is invalid or has already been used`,stateExpired:`OIDC login session expired — please try again`,providerNotFound:`OIDC provider not found`,discoveryFailed:`Failed to fetch OIDC discovery document`,invalidDiscovery:`OIDC discovery document is invalid`,networkError:`Network error during OIDC token exchange`,badResponse:`Unexpected response during OIDC token exchange`,noIdToken:`OIDC provider did not return an ID token`,validationFailed:`OIDC token validation failed`,nonceMismatch:`OIDC nonce mismatch — possible replay attack`,missingSubClaim:`OIDC token is missing the sub claim`,noLinkedAccount:`No local account is linked to this OIDC identity`,accountInactive:`Your account is inactive`,userResolutionFailed:`Failed to resolve your account`,internalError:`An internal error occurred during OIDC login`,tokenExchangeFailed:`OIDC token exchange failed`},forgotPasswordTitle:`Forgot Password`,forgotPasswordMessage:`If you've forgotten your password, please contact your system administrator to reset it.`,forgotPasswordEmailMessage:`Enter your email address and we'll send you a new password.`,emailAddress:`Email Address`,emailPlaceholder:`your.email@example.com`,cancel:`Cancel`,sending:`Sending...`,sendResetEmail:`Send Reset Email`,howToReset:`How to reset your password:`,resetStep1:`Contact your Bambuddy administrator`,resetStep2:`Ask them to reset your password in User Management`,resetStep3:`They can set a new temporary password for you`,resetStep4:`Log in with the new password and change it in Settings`,gotIt:`Got it`,resetPassword:{title:`Set New Password`,subtitle:`Enter and confirm your new password below.`,newPassword:`New Password`,newPasswordPlaceholder:`At least 8 characters`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Repeat new password`,saving:`Saving…`,submit:`Set New Password`,backToLogin:`Back to login`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 8 characters`,resetFailed:`Password reset failed. The link may have expired.`},twoFA:{title:`Two-Factor Authentication`,subtitle:`Your account is protected with 2FA. Enter the verification code below.`,methodAuthenticator:`Authenticator App`,methodEmail:`Email Code`,methodBackup:`Backup Code`,instructionsTotp:`Open your authenticator app and enter the 6-digit code for Bambuddy.`,instructionsEmail:`A 6-digit code has been sent to your email address. It expires in 10 minutes.`,instructionsEmailNotSent:`Click the button below to receive a verification code via email.`,instructionsBackup:`Enter one of your 8-character backup recovery codes. Each code can only be used once.`,sendCodeButton:`Send Code via Email`,sendingCode:`Sending...`,resendCode:`Resend code`,codeLabel:`Verification Code`,backupCodeLabel:`Backup Code`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verify`,verifyingButton:`Verifying...`,backToLogin:`← Back to login`,orContinueWith:`or continue with`,signInWith:`Sign in with {{provider}}`,enterCode:`Please enter the verification code`,sendCodeFailed:`Failed to send verification code`,invalidCode:`Invalid code. Please try again.`}},setup:{title:`Bambuddy Setup`,subtitle:`Configure authentication for your Bambuddy instance`,enableAuth:`Enable Authentication`,adminAccount:`Admin Account`,adminAccountDesc:`If admin users already exist, authentication will be enabled using the existing admin accounts. Leave the fields below empty to use existing admins, or enter new credentials to create a new admin user.`,adminUsername:`Admin Username`,adminPassword:`Admin Password`,optionalIfAdminExists:`(optional if admin users exist)`,adminUsernamePlaceholder:`Enter admin username (optional)`,adminPasswordPlaceholder:`Enter admin password (optional)`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Confirm admin password`,settingUp:`Setting up...`,completeSetup:`Complete Setup`,toast:{authEnabledAdminCreated:`Authentication enabled and admin user created`,authEnabledExistingAdmins:`Authentication enabled using existing admin users`,setupCompleted:`Setup completed`,enterBothCredentials:`Please enter both admin username and password, or leave both empty to use existing admin users`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 6 characters`}},changePassword:{title:`Change Password`,currentPassword:`Current Password`,currentPasswordPlaceholder:`Enter current password`,newPassword:`New Password`,newPasswordPlaceholder:`Enter new password (min 6 characters)`,confirmPassword:`Confirm New Password`,confirmPasswordPlaceholder:`Confirm new password`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 6 characters`,changing:`Changing...`,success:`Password changed successfully`,failed:`Failed to change password`},plateAlert:{title:`Print Paused!`,message:`Objects detected on build plate. The print has been automatically paused. Please clear the plate and resume the print.`,understand:`I Understand`},camera:{title:`Camera View`,invalidPrinterId:`Invalid printer ID`,live:`Live`,snapshot:`Snapshot`,restartStream:`Restart stream`,refreshSnapshot:`Refresh snapshot`,fullscreen:`Fullscreen`,exitFullscreen:`Exit fullscreen`,connectingToCamera:`Connecting to camera...`,capturingSnapshot:`Capturing snapshot...`,connectionLost:`Connection lost`,connectionFailed:`Camera connection failed`,reconnecting:`Reconnecting in {{countdown}}s... (attempt {{attempt}}/{{max}})`,reconnectNow:`Reconnect now`,cameraUnavailable:`Camera unavailable`,cameraUnavailableDesc:`Make sure the printer is powered on and connected.`,noCamera:`No camera available`,retry:`Retry`,cameraStream:`Camera stream`,zoomOut:`Zoom out`,zoomIn:`Zoom in`,resetZoom:`Reset zoom`,recording:`Recording`,startRecording:`Start Recording`,stopRecording:`Stop Recording`,chamberLight:`Toggle chamber light`,unavailable:`Camera unavailable`,diagnose:{button:`Diagnose`,modalTitle:`Camera diagnostic`,running:`Running diagnostic...`,runFailed:`Diagnostic could not run: {{error}}`,retry:`Run again`,stage:{tcp_reachable:`Network reachability`,first_frame:`Frame capture`,live_stream_active:`Live stream active`},summary:{all_ok:`Camera is working. The diagnostic completed all stages successfully.`,live_stream_active_healthy:`Camera is currently streaming with recent frames — no test needed.`,printer_unreachable:`Printer is not reachable. Check the IP address, network connection, and that the printer is powered on.`,camera_port_closed:`Printer is reachable but the camera port is closed. Make sure LAN-only mode and Developer Mode are enabled in the printer settings.`,no_frame:`Connected to the camera but no frames were received. Try again, or check that the camera is enabled in the printer settings.`,unknown_failure:`Camera diagnostic failed for an unknown reason. Check the support log for details.`},meta:{protocol:`Protocol`,port:`Port`,profile:`Profile`}}},groups:{title:`Group Management`,subtitle:`Manage permission groups for access control`,backToSettings:`Back to Settings`,createGroup:`Create Group`,noPermission:`You do not have permission to access this page.`,system:`System`,noDescription:`No description`,usersCount:`{{count}} users`,permissionsCount:`{{count}} permissions`,edit:`Edit`,delete:`Delete`,toast:{created:`Group created successfully`,updated:`Group updated successfully`,deleted:`Group deleted successfully`,enterGroupName:`Please enter a group name`},modal:{editGroup:`Edit Group`,createGroup:`Create Group`,cancel:`Cancel`,saving:`Saving...`,creating:`Creating...`,saveChanges:`Save Changes`},form:{groupName:`Group Name`,groupNamePlaceholder:`Enter group name`,systemGroupWarning:`System group names cannot be changed`,description:`Description`,descriptionPlaceholder:`Enter description (optional)`,permissions:`Permissions ({{count}} selected)`},deleteModal:{title:`Delete Group`,message:`Are you sure you want to delete this group? Users in this group will lose these permissions.`,confirm:`Delete Group`},editor:{title:`Edit Group`,createTitle:`Create Group`,search:`Search permissions...`,selectAll:`Select All`,clearAll:`Clear All`,permissionsSelected:`{{count}} selected`,noResults:`No permissions match your search`}},users:{title:`User Management`,subtitle:`Manage users and their access to your Bambuddy instance`,backToSettings:`Back to Settings`,createUser:`Create User`,noPermission:`You do not have permission to access this page.`,admin:`Admin`,noGroups:`No groups`,active:`Active`,inactive:`Inactive`,edit:`Edit`,delete:`Delete`,system:`System`,noGroupsAvailable:`No groups available`,table:{username:`Username`,groups:`Groups`,status:`Status`,actions:`Actions`},toast:{created:`User created successfully`,updated:`User updated successfully`,deleted:`User deleted successfully`,fillRequired:`Please fill in all required fields`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 6 characters`,ldapProvisioned:`Provisioned LDAP user "{{username}}"`},modal:{createUser:`Create User`,editUser:`Edit User`,cancel:`Cancel`,creating:`Creating...`,saving:`Saving...`,saveChanges:`Save Changes`,advancedAuthSubtitle:`with Advanced Authentication`,tabsAriaLabel:`User source`,localTab:`Local`,ldapTab:`LDAP`,ldapSearchLabel:`Search directory`,ldapSearchPlaceholder:`Type a username, name, or email...`,ldapMinChars:`Type at least 2 characters to search`,ldapTypeToSearch:`Start typing to search the LDAP directory`,ldapSearching:`Searching directory...`,ldapNoResults:`No matching users in the directory`,ldapSearchError:`Directory search failed. Check the LDAP server status.`,ldapAlreadyProvisioned:`Already provisioned`,ldapSelectedLabel:`Selected`,ldapProvision:`Provision user`,ldapProvisioning:`Provisioning...`,ldapErrorProvision:`Provisioning failed. Check the LDAP server status and try again.`},form:{username:`Username`,usernamePlaceholder:`Enter username`,email:`Email`,emailPlaceholder:`user@example.com`,password:`Password`,passwordPlaceholder:`Enter password`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Confirm password`,newPasswordPlaceholder:`Enter new password`,confirmNewPasswordPlaceholder:`Confirm new password`,leaveBlankToKeep:`leave blank to keep current`,groups:`Groups`,optional:`optional`,autoGeneratedPassword:`A secure password will be automatically generated and emailed to the user.`,passwordManagedByAdvancedAuth:`Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.`,resetPassword:`Reset Password`,resettingPassword:`Resetting Password...`},deleteModal:{title:`Delete User`,message:`Are you sure you want to delete this user? This action cannot be undone.`,confirm:`Delete User`}},streamOverlay:{title:`Stream Overlay`,invalidPrinterId:`Invalid printer ID`,cameraStream:`Camera stream`,progress:`Progress`,eta:`ETA`,printerIdle:`Printer is idle`,printerOffline:`Printer offline`,status:{printing:`Printing`,paused:`Paused`,finished:`Finished`,failed:`Failed`,idle:`Idle`,unknown:`Unknown`}},profiles:{title:`Profiles`,subtitle:`Manage your slicer presets and pressure advance calibrations`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Local Profiles`,kprofiles:`K-Profiles`},orcaCloud:{connectedAs:`Connected as`,logout:`Disconnect`,noLogoutPermission:`You do not have permission to disconnect`,noConnectPermission:`You do not have permission to connect to Orca Cloud`,retry:`Retry`,back:`Use a different sign-in method`,connect:{title:`Connect to Orca Cloud`,description:`Sign in to your Orca Cloud account to sync your slicer profiles into Bambuddy.`},providers:{google:`Sign in with Google`,apple:`Sign in with Apple`,github:`Sign in with GitHub`,email:`Sign in with email and password`},password:{title:`Sign in with email and password`,email:`Email`,emailPlaceholder:`you@example.com`,password:`Password`,submit:`Sign in`},paste:{title:`Finish signing in`,step1:`A new tab opened with the Orca Cloud sign-in page. Sign in with your Orca account.`,step2:`Your browser will be redirected to a "localhost" URL that fails to load. That is expected — the URL is what we need.`,step3:`Copy the entire URL from your browser's address bar and paste it below.`,signInUrl:`If the sign-in tab did not open, click this URL:`,label:`Paste the callback URL here`,placeholder:`http://localhost:41172/callback?code=...&state=...`,submit:`Finish connecting`},profiles:{title:`Your Orca Cloud profiles ({{count}})`,refresh:`Refresh`,empty:`No profiles found in your Orca Cloud account yet.`},toast:{connected:`Connected to Orca Cloud as {{email}}`,disconnected:`Disconnected from Orca Cloud`},errors:{startFailed:`Could not start the Orca Cloud sign-in flow.`,finishFailed:`Could not finish the Orca Cloud sign-in.`,passwordFailed:`Could not sign in with that email and password.`,passwordEmpty:`Please enter both your email and password.`,emptyPaste:`Please paste the callback URL from your browser.`,noCode:`That URL does not look like an Orca Cloud callback (no code parameter). Copy the full URL from your address bar.`}},localProfiles:{title:`Local Profiles`,subtitle:`Import and manage slicer presets from OrcaSlicer`,import:`Import Profiles`,importDesc:`Drop .bbscfg, .bbsflmt, .orca_filament, .zip, or .json files here`,importing:`Importing...`,search:`Search local presets...`,noPresets:`No local presets yet`,noSearchResults:`No presets match your search`,badge:`Local`,edit:`Edit`,delete:`Delete`,cancel:`Cancel`,deleteConfirmTitle:`Delete Preset`,deleteConfirm:`Are you sure you want to delete this preset? This cannot be undone.`,source:`Source`,inheritsFrom:`Inherits`,filamentType:`Type`,vendor:`Vendor`,compatiblePrinters:`Printers`,nozzleTemp:`Nozzle Temp`,cost:`Cost`,density:`Density`,pressureAdvance:`Pressure Advance`,filament:`Filament`,process:`Process`,printer:`Printer`,toast:{importSuccess:`{{count}} preset(s) imported`,importSkipped:`{{count}} preset(s) skipped (duplicates)`,importError:`{{count}} error(s) during import`,deleted:`Preset deleted`,updated:`Preset updated`}},connectedAs:`Connected as`,logout:`Logout`,noLogoutPermission:`You do not have permission to logout`,failedToLoad:`Failed to load profiles`,retry:`Retry`,time:{justNow:`Just now`,minsAgo:`{{count}}m ago`,hoursAgo:`{{count}}h ago`,daysAgo:`{{count}}d ago`},toast:{loggedOut:`Logged out`},login:{title:`Connect to Bambu Cloud`,subtitle:`Sync your slicer presets across devices`,email:`Email`,password:`Password`,region:`Region`,regionGlobal:`Global`,regionChina:`China`,verificationCode:`Verification Code`,totpCode:`Authenticator Code`,checkEmail:`Check your email ({{email}}) for a 6-digit code`,enterTotpHint:`Enter the 6-digit code from your authenticator app`,accessToken:`Access Token`,accessTokenHint:`Paste your Bambu Cloud access token. China-region accounts must use this path (phone-bound — email login unavailable). See the wiki for how to retrieve the token from MakerWorld cookies.`,back:`Back`,loginButton:`Login`,verifyButton:`Verify`,setTokenButton:`Set Token`,useToken:`Use access token instead`,useEmail:`Login with email instead`,toast:{loggedIn:`Logged in successfully`,codeSent:`Verification code sent to your email`,enterTotp:`Enter code from your authenticator app`,tokenSet:`Token set successfully`}},presets:{myPreset:`My preset (editable)`,duplicate:`Duplicate`,editable:`Editable`,failedToLoadDetails:`Failed to load preset details`,deleteConfirm:`Delete this preset?`,deleteWarning:`This will permanently delete "{{name}}" from Bambu Cloud. This cannot be undone.`,noDuplicatePermission:`You do not have permission to duplicate presets`,noEditPermission:`You do not have permission to edit presets`,noDeletePermission:`You do not have permission to delete presets`,types:{filament:`Filament preset`,printer:`Printer preset`,process:`Process preset`},toast:{deleted:`Preset deleted`,created:`Preset created`,updated:`Preset updated`,duplicated:`Preset duplicated`,fieldAdded:`Field "{{key}}" added`,exported:`Preset exported`},baseLabel:`Base: {{name}}`,currentLabel:`Current: {{name}}`,newPreset:`New Preset`,editPreset:`Edit Preset`,duplicatePreset:`Duplicate Preset`,createNewPreset:`Create New Preset`,customizeSettings:`Customize settings for your new preset`,compareWithBase:`Compare with base preset`,compare:`Compare`,basePreset:`Base Preset`,selectBasePreset:`Select base preset...`,presetName:`Preset Name`,myCustomPreset:`My custom preset`,inheritsFrom:`Inherits from`,dropJsonToImport:`Drop JSON to import`,tabs:{common:`Common`,allFields:`All Fields`},availableFields:`Available Fields`,searchFieldsPlaceholder:`Search fields...`,noMatchingFields:`No matching fields`,allFieldsAdded:`All fields added`,addCustomField:`Add custom field`,yourOverrides:`Your Overrides`,noOverridesYet:`No overrides yet`,clickFieldsToAdd:`Click fields on the left to add them`,saveAsTemplate:`Save as template`,jsonTip:`Tip: Drag & drop a .json file anywhere on this modal to import settings`},cloudView:{searchPlaceholder:`Search presets...`,templates:`Templates`,refresh:`Refresh`,newPreset:`New Preset`,clearFilters:`Clear filters`,compareMode:`Compare Mode`,selectAnotherPreset:`Select another {{type}} preset`,clickTwoPresets:`Click two presets of the same type to compare`,selectFirst:`1. Select first`,selectSecond:`2. Select second`,compareNow:`Compare Now`,lastSynced:`Last synced:`,showingCount:`Showing {{showing}} of {{total}} presets`,noPresetsFound:`No presets found`,columns:{filament:`Filament`,process:`Process`,printer:`Printer`},noFilamentPresets:`No filament presets`,noProcessPresets:`No process presets`,noPrinterPresets:`No printer presets`,filters:{type:`Type`,owner:`Owner`,printer:`Printer`,nozzle:`Nozzle`,filament:`Filament`,layer:`Layer`,all:`All`,myPresets:`My Presets`,builtIn:`Built-in`,process:`Process`},noTemplatesPermission:`You do not have permission to manage templates`,noRefreshPermission:`You do not have permission to refresh profiles`,noCreatePermission:`You do not have permission to create presets`},templates:{title:`Quick Templates`,noTemplates:`No templates yet`,createFirst:`Create templates from the preset editor`,typeFilter:`Type:`,deleteTitle:`Delete Template`,deleteWarning:`This action cannot be undone`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,namePlaceholder:`Template name`,descriptionPlaceholder:`Description`,settingsJson:`Settings (JSON)`,fieldsCount:`{{count}} fields`,shownInModals:`Shown in modals`,hiddenInModals:`Hidden in modals`,apply:`Apply`,toast:{deleted:`Template deleted`,updated:`Template updated`,created:`Template created`,applied:`Template applied`}}},support:{debugLoggingActive:`Debug logging is active`,manageLogs:`Manage`,collectItem7:`Printer connectivity and firmware versions`,collectItem8:`Integration status (Spoolman, MQTT, HA)`,collectItem9:`Network interfaces (subnets only)`,collectItem10:`Python package versions`,collectItem11:`Database health checks`,collectItem12:`Docker environment details`,bundleGenerating:`Generating bundle...`,bundleStepConnection:`Running printer connectivity checks`,bundleStepVirtualPrinters:`Running virtual-printer setup checks`,bundleStepLogScan:`Scanning recent logs for known issues`,bundleStepBuild:`Building the support bundle ZIP`},fileManager:{title:`File Manager`,subtitle:`Organize and manage your print files`,uploadFiles:`Upload Files`,newFolder:`New Folder`,folderName:`Folder Name`,folderNamePlaceholder:`e.g., Functional Parts`,renameFile:`Rename File`,renameFolder:`Rename Folder`,invalidFilenameChar:`The character "{{char}}" is not allowed in print filenames. The printer SD card rejects: < > : " / \\ | ? *`,moveFiles:`Move {{count}} File(s)`,rootNoFolder:`Root (No Folder)`,current:`current`,linkFolder:`Link Folder`,linkFolderDescription:`Link "{{name}}" to a project or archive for quick access.`,project:`Project`,archive:`Archive`,noProjectsFound:`No projects found`,noArchivesFound:`No archives found`,unlink:`Unlink`,link:`Link`,dragDropFiles:`Drag & drop files here`,dropFilesHere:`Drop files here`,releaseToUpload:`Release to upload`,orClickToBrowse:`or click to browse`,allFileTypesSupported:`All file types supported. ZIP files will be extracted.`,zipFilesDetected:`ZIP files detected`,zipExtractOptions:`ZIP files will be extracted. Choose how to handle folder structure:`,preserveZipStructure:`Preserve folder structure from ZIP`,createFolderFromZip:`Create folder from ZIP filename`,stlThumbnailGeneration:`STL thumbnail generation`,zipMayContainStl:`ZIP files may contain STL files. Thumbnails can be generated during extraction.`,thumbnailsCanBeGenerated:`Thumbnails can be generated for STL files. Large models may take longer to process.`,generateThumbnailsForStl:`Generate thumbnails for STL files`,threemfDetected:`3MF files detected`,threemfExtractionInfo:`Printer model, material, color, and print settings will be automatically extracted from 3MF files.`,willBeExtracted:`Will be extracted`,filesExtracted:`{{count}} files extracted`,uploadComplete:`Upload complete: {{succeeded}} succeeded`,uploadFailed:`Upload failed`,zipFilesFailed:`{{count}} files failed`,uploading:`Uploading...`,changeLink:`Change Link...`,linkTo:`Link to...`,linkToProjectOrArchive:`Link to project or archive`,addToQueue:`Add to Queue`,schedulePrint:`Schedule`,generateThumbnail:`Generate Thumbnail`,generateThumbnails:`Generate Thumbnails`,generateThumbnailsForMissing:`Generate thumbnails for STL files missing them`,gridView:`Grid view`,listView:`List view`,lowDiskSpaceWarning:`Low disk space warning`,lowDiskSpaceDetails:`Only {{free}} free of {{total}} total. Threshold is set to {{threshold}} GB in settings.`,files:`Files`,folders:`Folders`,size:`Size`,free:`Free`,allFiles:`All Files`,allExternal:`External`,externalIsEmpty:`No external files`,externalEmptyDescription:`Files in your linked external folders will appear here.`,wrap:`Wrap`,enableTextWrapping:`Enable text wrapping`,disableTextWrapping:`Disable text wrapping`,collapse:`Collapse`,collapseFoldersByDefault:`Collapse folders by default`,expandFoldersByDefault:`Expand folders by default`,folderSort:`Sort folders`,folderSortByName:`By name`,folderSortByActivity:`By recent activity`,dragToResizeTooltip:`Drag to resize, double-click to reset`,searchFiles:`Search files...`,searchSubfoldersHint:`Including subfolders`,readme:{truncated:`Truncated`},tags:{title:`Tags`,subtitle:`Label files for cross-cutting filtering — toys, kid-safe, PETG-only, anything.`,manage:`Tags`,manageTitle:`Manage tag catalog`,add:`New tag`,edit:`Rename tag`,name:`Name`,fileCount:`Files`,empty:`No tags yet. Create one to start labelling files.`,noMatches:`No matching tags.`,createPlaceholder:`e.g. toys, kid-safe, petg`,createButton:`Create`,nameRequired:`Name is required.`,searchPlaceholder:`Filter tags...`,created:`Tag created.`,updated:`Tag renamed.`,deleted:`Tag removed.`,saveFailed:`Could not save tag.`,deleteFailed:`Could not remove tag.`,applyFailed:`Could not apply tags.`,applyAdd:`Add tags`,applyRemove:`Remove tags`,applyAddSuccess:`Added {{count}} tag(s) across {{files}} file(s).`,applyRemoveSuccess:`Removed {{count}} tag(s) across {{files}} file(s).`,actionAdd:`Add to selected files`,actionRemove:`Remove from selected files`,tagAction:`Tag`,bulkTitle:`Tag {{count}} selected file(s)`,bulkTooltip:`Add or remove tags on every selected file.`,noPermission:`You do not have permission to tag files.`,filterLabel:`Filtering by:`,clearAll:`Clear all`,confirmDelete:`Delete tag "{{name}}"?`,confirmDeleteMessage:`This removes the tag from the catalog. Files keep their other tags.`,confirmDeleteInUseMessage:`This tag is on {{count}} file(s). Deleting removes the chip from all of them; files themselves are untouched.`,editAria:`Edit {{name}}`,deleteAria:`Delete {{name}}`},allTypes:`All types`,prints:`Prints`,ascending:`Ascending`,descending:`Descending`,resultsCount:`{{showing}} of {{total}} files`,selectAll:`Select All`,deselectAll:`Deselect All`,selected:`{{count}} selected`,adding:`Adding...`,loadingFiles:`Loading files...`,folderIsEmpty:`Folder is empty`,noFilesYet:`No files yet`,folderEmptyDescription:`Upload files or move files into this folder to get started.`,noFilesDescription:`Upload files to start organizing your print-related files.`,noMatchingFiles:`No matching files`,noMatchingFilesDescription:`No files match your current search or filter criteria.`,clearFilters:`Clear filters`,printedCount:`Printed {{count}}x`,uploadedBy:`Uploaded By`,deleteFolder:`Delete Folder`,deleteFile:`Delete File`,deleteFilesCount:`Delete {{count}} Files`,deleteFolderConfirm:`Are you sure you want to delete this folder? All files inside will also be deleted.`,deleteFileConfirm:`Are you sure you want to delete this file?`,deleteFilesConfirm:`Are you sure you want to delete {{count}} selected files? This action cannot be undone.`,deleting:`Deleting...`,noPermissionRenameFolder:`You do not have permission to rename folders`,noPermissionLinkFolder:`You do not have permission to link folders`,noPermissionDeleteFolder:`You do not have permission to delete folders`,noPermissionPrint:`You do not have permission to print`,noPermissionAddToQueue:`You do not have permission to add to queue`,noPermissionSlice:`You do not have permission to slice files`,noPermissionDownload:`You do not have permission to download files`,noPermissionRenameFile:`You do not have permission to rename this file`,noPermissionGenerateThumbnail:`You do not have permission to generate thumbnails`,noPermissionDeleteFile:`You do not have permission to delete this file`,noPermissionCreateFolder:`You do not have permission to create folders`,noPermissionUpload:`You do not have permission to upload files`,noPermissionMoveFiles:`You do not have permission to move files`,noPermissionDeleteFiles:`You do not have permission to delete files`,linkExternal:`Link External`,linkExternalFolder:`Link External Folder`,linkExternalFolderDescription:`Mount a host directory (NAS, USB, network share) into the File Manager. Files are not copied — they are accessed directly from the original path.`,externalFolderNamePlaceholder:`e.g., NAS Prints`,externalPath:`Host Path`,externalPathHelp:`Absolute path to the directory on the Docker host. Must be bind-mounted into the container.`,readOnly:`Read Only`,readOnlyHelp:`prevents uploads and deletions`,showHiddenFiles:`Show hidden files (dotfiles)`,externalFolder:`External Folder`,scanFolder:`Scan`,toast:{folderCreated:`Folder created`,folderDeleted:`Folder deleted`,fileDeleted:`File deleted`,filesDeleted:`Deleted {{count}} files`,filesMoved:`Files moved`,folderLinked:`Folder linked`,folderUnlinked:`Folder unlinked`,externalFolderLinked:`External folder linked and scanned`,folderScanned:`Scan complete: {{added}} added, {{removed}} removed`,addedToQueue:`Added {{count}} file(s) to queue`,addedToQueuePartial:`Added {{added}} file(s), {{failed}} failed`,failedToAddToQueue:`Failed to add files: {{error}}`,fileRenamed:`File renamed`,folderRenamed:`Folder renamed`,thumbnailsGenerated:`Generated {{count}} thumbnail(s)`,thumbnailsGeneratedPartial:`Generated {{succeeded}} thumbnail(s), {{failed}} failed`,noStlMissingThumbnails:`No STL files missing thumbnails`,failedToGenerateThumbnails:`Failed to generate thumbnails: {{error}}`,thumbnailGenerated:`Thumbnail generated`,failedToGenerateThumbnail:`Failed to generate thumbnail: {{error}}`}},projects:{title:`Projects`,subtitle:`Organize and track your 3D printing projects`,newProject:`New Project`,editProject:`Edit Project`,deleteProject:`Delete Project`,projectName:`Project Name`,description:`Description`,noProjects:`No projects yet`,noProjectsFiltered:`No {{status}} projects`,noProjectsFilteredHelp:`You don't have any {{status}} projects. Projects will appear here when their status changes.`,createFirst:`Create your first project to start organizing related prints, tracking progress, and managing your builds.`,createFirstButton:`Create Your First Project`,create:`Create`,files:`Files`,prints:`Prints`,plates:`plates`,parts:`parts`,lastModified:`Last Modified`,deleteConfirm:`Are you sure you want to delete this project? Archives and queue items will be unlinked but not deleted.`,addFiles:`Add Files`,removeFile:`Remove File`,viewDetails:`View Details`,namePlaceholder:`e.g., Voron 2.4 Build`,descriptionPlaceholder:`Optional description...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL must start with http:// or https://`,openExternalUrl:`Open project URL`,coverImageLabel:`Cover photo`,coverImageAlt:`Project cover photo`,coverImageUpload:`Upload`,coverImageReplace:`Replace`,coverImageRemove:`Remove`,color:`Color`,targetPlates:`Target Plates`,targetPlatesPlaceholder:`e.g., 25`,targetPlatesHelp:`Number of print jobs`,targetParts:`Target Parts`,targetPartsPlaceholder:`e.g., 150`,targetPartsHelp:`Total objects needed`,tagsLabel:`Tags (comma-separated)`,tagsPlaceholder:`e.g., voron, functional, gift`,dueDate:`Due Date`,priority:`Priority`,priorityLow:`Low`,priorityNormal:`Normal`,priorityHigh:`High`,priorityUrgent:`Urgent`,statusActive:`Active`,statusCompleted:`Completed`,statusArchived:`Archived`,done:`Done`,completed:`completed`,failed:`failed`,inQueue:`in queue`,noPrintsYet:`No prints yet`,printJobs:`Print jobs (plates)`,partsPrinted:`Parts printed`,failedParts:`Failed parts`,import:`Import`,export:`Export`,importProject:`Import project`,exportAll:`Export all projects`,loading:`Loading projects...`,noEditPermission:`You do not have permission to edit projects`,noDeletePermission:`You do not have permission to delete projects`,noCreatePermission:`You do not have permission to create projects`,noImportPermission:`You do not have permission to import projects`,noExportPermission:`You do not have permission to export projects`,toast:{created:`Project created`,updated:`Project updated`,deleted:`Project deleted`,imported:`Project imported`,multipleImported:`{{count}} projects imported`,importFailed:`Import failed`,exported:`Projects exported (metadata only)`}},projectDetail:{notFound:`Project not found`,backToProjects:`Back to Projects`,export:`Export`,exportProject:`Export project`,noExportPermission:`You do not have permission to export projects`,noEditPermission:`You do not have permission to edit projects`,partOf:`Part of:`,priorityLabel:`Priority:`,noPrints:`No prints in this project yet`,status:{active:`Active`,completed:`Completed`,archived:`Archived`},priority:{low:`Low`,normal:`Normal`,high:`High`,urgent:`Urgent`},dueDate:{overdue:`Overdue`,today:`Due today`,daysLeft:`{{count}} days left`},progress:{platesProgress:`Plates Progress`,partsProgress:`Parts Progress`,printJobs:`print jobs`,parts:`parts`,percentComplete:`{{percent}}% complete`,remaining:`{{count}} remaining`},stats:{printJobs:`Print Jobs`,total:`total`,failed:`{{count}} failed`,partsPrinted:`{{count}} parts printed`,printTime:`Print Time`,filamentUsed:`Filament Used`},cost:{title:`Cost Tracking`,filamentCost:`Filament Cost`,energy:`Energy`,totalCost:`Total Cost`,total:`Total`,includesBom:`incl. BOM`,budget:`Budget`,remaining:`Remaining`},subProjects:{title:`Sub-projects ({{count}})`},notes:{title:`Notes`,noEditPermission:`You do not have permission to edit notes`,placeholder:`Add notes about this project...`,empty:`No notes yet. Click Edit to add notes.`},files:{title:`Files`,linkFolders:`Link folders from the File Manager`,forQuickAccess:`to this project for quick access.`,fileCount:`{{count}} file(s)`,empty:`No folders linked. Go to File Manager and link a folder to this project.`,noFiles:`No files in this folder.`,print:`Print Now`,addToQueue:`Add to Queue`},bom:{title:`Bill of Materials`,acquired:`{{completed}}/{{total}} acquired`,showAll:`Show all`,hideDone:`Hide done`,addPart:`Add Part`,noAddPermission:`You do not have permission to add parts`,partNamePlaceholder:`Part name (e.g., M3x8 screws)`,partName:`Part name`,qty:`Qty`,price:`Price ({{currency}})`,sourcingUrlPlaceholder:`Sourcing URL (optional)`,remarksPlaceholder:`Remarks (optional)`,deletePart:`Delete Part`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,noUpdatePermission:`You do not have permission to update parts`,noEditPermission:`You do not have permission to edit parts`,noDeletePermission:`You do not have permission to delete parts`,totalCost:`Total cost:`,empty:`No parts in the bill of materials. Add hardware, electronics, or other components to track what needs to be sourced.`},timeline:{title:`Activity Timeline`,empty:`No activity yet.`},template:{saveAsTemplate:`Save as Template`,noCreatePermission:`You do not have permission to create templates`},queue:{title:`Queue`,viewAll:`View all`,printing:`{{count}} printing`,queued:`{{count}} queued`},prints:{title:`Prints ({{count}})`},toast:{projectUpdated:`Project updated`,partAdded:`Part added`,partRemoved:`Part removed`,exportFailed:`Export failed`,projectExported:`Project exported`,templateCreated:`Template created`}},system:{title:`System Information`,version:`Version`,uptime:`Uptime`,cpuUsage:`CPU Usage`,memoryUsage:`Memory Usage`,diskUsage:`Disk Usage`,networkInfo:`Network Info`,logs:`Logs`,debugMode:`Debug Mode`,enableDebug:`Enable Debug Logging`,disableDebug:`Disable Debug Logging`,downloadLogs:`Download Logs`,clearLogs:`Clear Logs`,dockerInfo:`Docker Info`,containerName:`Container Name`,imageName:`Image Name`,platform:`Platform`,architecture:`Architecture`},sponsors:{sectionTitle:`Independent & community-funded`,tagline:`Bambuddy is free and stays that way because people choose to support it. No VC, no cloud lock-in.`,viewSupporters:`View supporters`,toastPrints:`You've completed {{count}} prints with Bambuddy. Bambuddy stays free thanks to its supporters.`,toastCost:`You've tracked {{total}} in filament with Bambuddy. See who keeps the project independent.`,toastArchives:`{{count}} prints archived with Bambuddy. See who keeps it independent.`,toastAnniversary:`One year with Bambuddy! See who keeps the project independent.`,toastVersionUpdate:`Updated to v{{version}}. Bambuddy stays free thanks to its supporters.`},library:{title:`Filament Library`,addFilament:`Add Filament`,editFilament:`Edit Filament`,deleteFilament:`Delete Filament`,vendor:`Vendor`,material:`Material`,color:`Color`,kFactor:`K Factor`,temperature:`Temperature`,noFilaments:`No filaments in library`,deleteConfirm:`Are you sure you want to delete this filament?`,importFromPrinter:`Import from Printer`,exportToFile:`Export to File`},slice:{title:`Slice model`,action:`Slice`,actionAll:`Slice all {{count}} plates`,actionAllTitle:`Slice every plate into one multi-plate output (single archive). Filament selection covers every slot the project defines.`,allPlatesToggle:`Slice all {{count}} plates`,slicing:`Slicing…`,printer:`Printer profile`,process:`Process profile`,filament:`Filament profile`,filamentSlot:`Filament {{index}} ({{type}})`,selectPreset:`— Select a preset —`,loadingPresets:`Loading presets…`,analyzingPlateFilaments:`Analyzing plate filaments…`,analyzingPlateFilamentsHint:`Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.`,previewToast:`Analyzing {{name}} — {{elapsed}}`,previewWithProgress:`Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— not used by this plate`,noPresetsForSlot:`No presets available`,otherPrinters:`Other printers`,presetsLoadFailed:`Failed to load presets. Open Settings → Profiles to import them first.`,refreshPresets:`Refresh`,refreshPresetsTitle:`Refresh presets — fetch the latest cloud and bundled listings (use after deleting a preset in Bambu Studio or Bambu Handy)`,allPresetsRequired:`All presets must be selected`,enqueuing:`Submitting slice job…`,queued:`Queued…`,failed:`Slicing failed. Check the slicer sidecar logs.`,startedToast:`Slicing {{name}} in the background…`,queuedToast:`Queued: {{name}} — {{elapsed}}`,runningToast:`Slicing {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Plate {{plateIndex}} of {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`Sliced {{name}}`,failedTitle:`Slicing failed`,failedToast:`Slicing {{name}} failed: {{detail}}`,tier:{local:`Imported`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`Sign in to Bambu Cloud (Settings → Profiles → Bambu Cloud) to see your cloud presets.`,expired:`Bambu Cloud session expired — sign in again to refresh your cloud presets.`,unreachable:`Bambu Cloud is unreachable right now. Local and standard presets still work.`},orcaCloud:{notAuthenticated:`Sign in to Orca Cloud (Profiles → Orca Cloud) to see your Orca presets.`,expired:`Orca Cloud session expired — sign in again to refresh your Orca presets.`,unreachable:`Orca Cloud is unreachable right now. Other presets still work.`},bedType:{label:`Build plate`,auto:`Auto (use process preset)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`}},spoolman:{title:`Spoolman Integration`,enabled:`Spoolman Enabled`,url:`Spoolman URL`,connected:`Connected`,disconnected:`Not Connected`,testConnection:`Test Connection`,sync:`Sync`,syncing:`Syncing...`,lastSync:`Last Sync`,linkToSpoolman:`Link to Spoolman`,openInSpoolman:`Open in Spoolman`,unlinkSpool:`Unlink Spool`,unlinkConfirmTitle:`Unassign Spool?`,unlinkConfirmMessage:`This will remove the spool from this slot. The spool data itself will remain unchanged.`,selectSpool:`Select Spool`,noUnlinkedSpools:`No unassigned spools available`,linkSuccess:`Spool assigned successfully`,linkFailed:`Failed to assign spool`,unlinkSuccess:`Spool unassigned successfully`,unlinkFailed:`Failed to unassign spool`,linkedSpool:`Assigned spool`,spoolId:`Spool ID`,fillSourceLabel:`(Spoolman)`,weight:`Weight`,remaining:`Remaining`,disableWeightSync:`Disable AMS Estimated Weight Sync`,disableWeightSyncDesc:`Don't update remaining capacity from AMS estimates. Use this if you prefer Spoolman's usage tracking over AMS percentage-based estimates. New spools will still use the AMS estimate as their initial weight.`,reportPartialUsage:`Report Partial Usage for Failed Prints`,reportPartialUsageDesc:`When a print fails or is cancelled, report the estimated filament used up to that point based on layer progress.`},locations:{title:`Storage Locations`,subtitle:`Manage shelves, drawers, and other physical storage spots for your spools`,add:`Add Location`,addShort:`Add`,edit:`Edit Location`,name:`Name`,spools:`Spools`,empty:`No storage locations yet. Create your first shelf or drawer.`,manage:`Locations`,createPlaceholder:`e.g. Shelf A, Drawer 1`,nameRequired:`Location name is required`,created:`Location created`,updated:`Location updated`,deleted:`Location deleted`,saveFailed:`Failed to save location`,deleteFailed:`Failed to delete location`,deleteBlocked:`Remove all spools from this location before deleting`,confirmDelete:`Delete "{{name}}"?`,confirmDeleteMessage:`This location will be removed from the catalog. Spools must be moved first.`},inventory:{title:`Spool Inventory`,subtitle:`Manage your spools`,spoolmanMixedContentTitle:`Spoolman can't load over HTTPS — mixed-content blocked by your browser`,spoolmanMixedContentBody:`Bambuddy is served over HTTPS (via your reverse proxy), but your Spoolman URL is still plain HTTP. Browsers block mixed content for security, so the embedded Spoolman UI can't render. Spoolman needs to be reachable over HTTPS for this to work.`,spoolmanMixedContentFixReverseProxy:`Put Spoolman behind the same reverse proxy as Bambuddy (Traefik / Nginx / Caddy) with HTTPS, then update the Spoolman URL in Settings to the new HTTPS address.`,spoolmanMixedContentFixOpenNewTab:`As a workaround, open Spoolman in a new browser tab over HTTP — mixed-content rules only apply to embedded frames, so a standalone tab still works.`,spoolmanOpenInNewTab:`Open Spoolman in a new tab`,labels:{title:`Print spool labels`,selectedCount:`{{count}} selected`,pickSpools:`Pick which spools to print labels for:`,searchPlaceholder:`Search name, brand, or #ID`,filterByMaterial:`Material:`,allMaterials:`All`,selectVisible:`Select all visible ({{count}})`,deselectVisible:`Deselect visible`,clearAll:`Clear all`,noSpoolsToShow:`No spools to show. Adjust your filter and try again.`,noMatches:`No spools match the current search or filter.`,printOne:`Print label for this spool`,printLabels:`Print labels…`,bulkTitle:`Pick spools to print labels for from the {{count}} currently shown`,noSpoolsTitle:`No spools to label`,error:`Could not generate labels: {{msg}}`,sortBy:{label:`Sort:`,id:`By ID`,color:`By colour`},templates:{amsHolderSmall:{label:`AMS holder — small (74 × 33 mm)`,hint:`Single label per page; matches the printable label from MakerWorld model 752566 (AMS Filament Label Holder).`},amsHolderLarge:{label:`AMS holder — large (75 × 55 mm)`,hint:`Single label per page; fits the cardstock-insert variant of the AMS Filament Label Holder. Roomy enough for swatch, brand, material, ID, and QR code.`},box40x30:{label:`Box label (40 × 30 mm)`,hint:`Single label per page; common DK/Brother roll size, good for filament-bag and storage-bin labels.`},box:{label:`Box label (62 × 29 mm)`,hint:`Single label per page; sized for Brother PT/QL and Dymo small labels.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`EU sheet stock; 21 labels per A4 page.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`US sheet stock; 30 labels per Letter page.`}}},csv:{importButton:`Import CSV`,exportButton:`Export CSV`,modalTitle:`Import spools from CSV`,selectFile:`Choose a CSV file or drag it here`,dragHint:`Header: material (required), brand, subtype, color_name, rgba, …`,parsing:`Reading file…`,previewError:`Could not read the CSV file`,validCount:`{{count}} valid`,errorCount:`{{count}} error`,skippedCount:`{{count}} skipped`,colRow:`Row`,colStatus:`Status`,colColor:`Color`,colorResolved:`Color filled from catalog`,colorCrossMaterial:`Color taken from a different material — no exact match in catalog`,duplicateExisting:`A spool with this material, brand and color already exists — it will still be imported as a new spool`,spoolmanHint:`In Spoolman mode, use Spoolman's built-in CSV import/export.`,importValidRows:`Import {{count}} valid rows`,noValidRows:`No valid rows`,importing:`Importing…`,importSuccess:`{{count}} spools imported`,importError:`Import failed`,exportError:`Export failed`},addSpool:`Add Spool`,editSpool:`Edit Spool`,copySpool:`Copy Spool`,material:`Material`,selectMaterial:`Select material...`,subtype:`Subtype`,brand:`Brand`,searchBrand:`Search brand...`,useCustomBrand:`Use "{{brand}}"`,useCustomMaterial:`Use custom material: {{material}}`,colorName:`Color Name`,colorNamePlaceholder:`Jade White, Fire Red...`,color:`Color`,hexColor:`Hex Color`,pickColor:`Pick custom color`,labelWeight:`Label Weight`,coreWeight:`Empty Spool Weight`,searchSpoolWeight:`Search spool weight...`,weightUsed:`Used`,currentWeight:`Remaining Weight`,measuredWeight:`Measured Weight`,spoolName:`Spool`,costPerKg:`Cost per kg`,storageLocation:`Storage Location`,storageLocationPlaceholder:`e.g. Shelf A, Drawer 1`,openInInventory:`Open in Inventory`,measuredWeightError:`Measured weight must be between {{min}}g and {{max}}g.`,slicerFilament:`Slicer Filament`,slicerFilamentName:`Slicer Preset Name`,slicerPreset:`Slicer Preset`,searchPresets:`Search filament presets...`,selectedPreset:`Selected`,noPresetsFound:`No presets found`,tempOverrides:`Temperature Overrides`,note:`Note`,notePlaceholder:`Any additional notes about this spool...`,category:`Category`,categoryPlaceholder:`e.g. Production, Prototype, Client A`,categoryNone:`Uncategorized`,storageLocationNone:`No location set`,lowStockThresholdOverride:`Low-stock threshold (this spool)`,lowStockThresholdOverrideHelp:`Leave blank to use the global threshold ({{global}}%).`,clearRfid:`Clear RFID Tag`,rfidCleared:`RFID tag cleared`,archive:`Archive`,restore:`Restore`,noSpools:`No spools yet. Add your first spool to get started.`,noAvailableSpools:`No spools available. Add a spool to your inventory or unassign one from another slot first.`,kProfiles:`K-Profiles`,addKProfile:`Add K-Profile`,assignSpool:`Assign Spool`,unassignSpool:`Unassign`,assignSuccess:`Spool assigned and AMS slot configured`,assignPendingInsert:`Assigned. Slot will configure when you insert the spool.`,assignFailed:`Failed to assign spool`,selectSpool:`Select a spool to assign to this slot`,assigned:`Assigned`,assigning:`Assigning...`,searchSpools:`Search spools...`,showAllSpools:`Show all spools`,spoolmanSpools:`Spoolman Spools`,allMaterials:`All Materials`,filterByBrand:`Filter by brand...`,showArchived:`Show archived`,quickAdd:`Quick Add (Stock)`,quantity:`Quantity`,stock:`Stock`,configured:`Configured`,spoolsCreated:`{{count}} spools created`,spoolsPartiallyCreated:`{{created}} of {{total}} spools created (some failed)`,spoolCreated:`Spool created`,spoolUpdated:`Spool updated`,spoolDeleted:`Spool deleted`,deepLinkSpoolNotFound:`Spool not found`,deepLinkFetchFailed:`Could not load spool — try again`,spoolArchived:`Spool archived`,spoolRestored:`Spool restored`,kProfileSaveFailed:`K-profile settings could not be saved`,syncWeightSpoolNotFound:`Spool not found — it may have been deleted`,syncWeightSpoolmanUnreachable:`Spoolman is unreachable — try again later`,syncWeightFailed:`Failed to sync weight`,spoolmanUnreachable:`Spoolman is not reachable — please try again later`,deleteSpoolNotFound:`Spool not found — it may have already been deleted`,deleteFailed:`Failed to delete spool`,archiveSpoolNotFound:`Spool not found — it may have already been deleted`,archiveFailed:`Failed to archive spool`,restoreSpoolNotFound:`Spool not found — it may have already been deleted`,restoreFailed:`Failed to restore spool`,saveFailed:`Failed to save changes`,tagClearFailed:`Failed to clear tag`,deleteConfirm:`Are you sure you want to delete this spool? This cannot be undone.`,archiveConfirm:`Are you sure you want to archive this spool?`,advancedSettings:`Advanced Settings`,filamentInfoTab:`Filament Info`,paProfileTab:`PA Profile`,filamentInfo:`Filament`,additional:`Additional`,loadingPresets:`Loading cloud presets...`,cloudConnected:`Cloud connected`,cloudNotConnected:`Cloud not connected (using defaults)`,recentColors:`Recent`,searchColors:`Search colors...`,searchResults:`Search results`,allColors:`All colors`,commonColors:`Common colors`,showLess:`Show less`,showAll:`Show all`,noColorsFound:`No colors match your search`,noResults:`No matches found`,extraColorsLabel:`Extra colors`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.`,extraColorsInvalid:`Ignored invalid hex: {{tokens}}`,colorEffectLabel:`Effect`,colorEffect:{none:`None`,sparkle:`Sparkle`,wood:`Wood`,marble:`Marble`,glow:`Glow`,matte:`Matte`,silk:`Silk`,galaxy:`Galaxy`,rainbow:`Rainbow`,metal:`Metal`,translucent:`Translucent`,gradient:`Gradient`,dualColor:`Dual Color`,triColor:`Tri Color`,multicolor:`Multicolor`},selectMaterialFirst:`Please select a material first in the Filament Info tab.`,noPrintersConfigured:`No printers configured. Add printers to use PA profiles.`,matchingFilter:`Matching`,anyBrand:`Any brand`,anyVariant:`Any variant`,autoSelect:`Auto-select`,matches:`matches`,match:`match`,noMatches:`No matches`,connected:`Connected`,offline:`Offline`,printerOffline:`Printer is offline. Connect to view calibration profiles.`,noKProfilesMatch:`No K-profiles match the selected filament.`,leftNozzle:`Left Nozzle`,rightNozzle:`Right Nozzle`,profilesSelected:`calibration profile(s) selected`,totalInventory:`Total Inventory`,totalConsumed:`Total Consumed`,byMaterial:`By Material`,inPrinter:`In Printer`,lowStock:`Low Stock`,sinceTracking:`Since tracking started`,resetConsumedCounter:`Reset counter`,resetConsumedCounterTooltip:`Zero the consumed-grams counter for this spool. Remaining weight is not changed.`,resetConsumedCounterConfirm:`Reset this spool's consumed-grams counter to 0? Future prints will track from zero again. The spool itself, its remaining weight calculation, and your settings are not changed.`,resetAllConsumedCounters:`Reset all counters`,resetAllConsumedCountersTooltip:`Zero the consumed-grams counter on every spool. Remaining weights are not changed.`,resetAllConsumedCountersConfirm:`Reset the consumed-grams counter to 0 on all {{count}} spools (archived ones included)? This clears the "Total Consumed" stat so future prints track from zero. Spools and remaining weights are not changed.`,consumedCounterReset:`Counter reset`,allConsumedCountersReset:`Counter reset for {{count}} spool(s)`,resetConsumedCounterFailed:`Failed to reset counter`,loadedInAms:`Loaded in AMS/Ext`,remaining:`Remaining`,weightCheck:`Weight Check`,lastWeighed:`Last weighed`,neverWeighed:`Never weighed`,search:`Search spools...`,showing:`Showing`,to:`to`,of:`of`,show:`Show`,spools:`spools`,spool:`spool`,page:`Page`,noSpoolsMatch:`No results found`,noSpoolsMatchDesc:`Try adjusting your search or filters to find what you're looking for.`,active:`Active`,archived:`Archived`,all:`All`,used:`Used`,new:`New`,clearFilters:`Clear filters`,table:`Table`,cards:`Cards`,net:`Net`,groupSimilar:`Group`,groupedSpools:`{{count}} identical spools`,groupedRows:`rows`,columns:`Columns`,configureColumns:`Configure Columns`,configureColumnsDesc:`Drag to reorder columns or use arrows. Toggle visibility with the eye icon.`,visible:`visible`,reset:`Reset`,cancel:`Cancel`,applyChanges:`Apply Changes`,moveUp:`Move up`,moveDown:`Move down`,hideColumn:`Hide column`,showColumn:`Show column`,linkToSpool:`Link to Spool`,tagLinked:`Tag linked to spool`,tagLinkFailed:`Failed to link tag`,tagAlreadyLinked:`Tag already linked to another spool`,unknownTag:`Unknown RFID tag detected`,usageHistory:`Usage History`,noUsageHistory:`No usage recorded yet`,printName:`Print Name`,weightConsumed:`Weight Consumed`,clearHistory:`Clear`,historyCleared:`Usage history cleared`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`Threshold must be between 0.1 and 99.9`,assignMismatchTitle:`Material mismatch`,assignMismatchMessage:`The selected spool material "{{spoolMaterial}}" does not match the tray material "{{trayMaterial}}" for {{location}}. Assign anyway?`,assignMismatchConfirm:`Assign Anyway`,assignPartialMismatchMessage:`The spool material "{{spoolMaterial}}" is similar to but not exactly matching "{{trayMaterial}}" in {{location}}. Do you want to proceed?`,assignProfileMismatchMessage:`The spool profile "{{spoolProfile}}" does not match the tray profile "{{trayProfile}}" in {{location}}. Do you want to proceed?`,assignReconfigureNote:`The AMS slot will be reconfigured to use the spool's profile.`,spoolmanFilamentCatalog:`Spoolman Filament Catalog`,pickFromSpoolmanCatalog:`Pick from Spoolman catalog…`,spoolmanFilamentSelected:`Filament selected from Spoolman catalog`,spoolmanFilamentUnlinked:`Filament catalog link cleared`,noSpoolmanFilaments:`No filaments found in Spoolman catalog`,spoolmanFilamentColorSwatch:`Filament color`,spoolWeightManagedBySpoolman:`Empty spool weight is managed per filament type in Spoolman`,spoolmanCatalogLoadFailed:`Failed to load Spoolman filament catalog`},timelapse:{title:`Timelapse`,create:`Create Timelapse`,download:`Download`,delete:`Delete`,preview:`Preview`,frameRate:`Frame Rate`,quality:`Quality`,processing:`Processing...`,noTimelapses:`No timelapses available`},ams:{title:`AMS`,slot:`Slot`,empty:`Empty`,emptySlot:`Empty slot`,slotEmpty:`Empty`,slotUnconfigured:`?`,emptySlotReset:`No filament assigned`,unknown:`Unknown`,humidity:`Humidity`,temperature:`Temperature`,filamentType:`Filament Type`,filamentColor:`Color`,remaining:`Remaining`,history:`AMS History`,noHistory:`No history available`,configureSlot:`Configure Slot`,externalSpool:`External Spool`,profile:`Profile`,kFactor:`K Factor`,fill:`Fill`,configure:`Configure`,used:`used`,remainingUnit:`remaining`},printModal:{title:`Start Print`,selectPrinter:`Select Printer`,selectPlate:`Select Plate`,filamentMapping:`Filament Mapping`,totalCost:`Total cost:`,slotRemainingShort:` - {{grams}}g left`,printSettings:`Print Settings`,bedLeveling:`Bed Leveling`,flowCalibration:`Flow Calibration`,vibrationCalibration:`Vibration Calibration`,layerInspection:`First Layer Inspection`,timelapse:`Timelapse`,startPrint:`Start Print`,addToQueue:`Add to Queue`,cancel:`Cancel`,noPrintersAvailable:`No printers available`,printerBusy:`Printer is busy`,printerOffline:`Printer is offline`,sameTypeDifferentColor:`Same type, different color`,filamentTypeNotLoaded:`Filament type not loaded`,openCalendar:`Open calendar`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Left nozzle`,rightNozzleTooltip:`Right nozzle`,filamentOverride:`Filament Override`,filamentOverrideHint:`Optionally override filaments for model-based assignment. The scheduler will match against your selected filaments instead of the original 3MF values.`,originalFilament:`Original`,overrideWith:`Override with`,resetToOriginal:`Reset to original`,insufficientFilamentTitle:`Not enough filament`,insufficientFilamentMessage:`Some assigned spools have less filament remaining than this print needs:`,insufficientFilamentLine:`{{printer}} - {{slot}}: needs {{required}}g, remaining {{remaining}}g`,printAnyway:`Print anyway`,forceColorMatch:`Force color match`,staggerPrinterStarts:`Stagger printer starts`,staggerGroupSize:`Group size`,staggerInterval:`Interval (min)`,staggerPreview:`{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min`,staggerLastGroup:`last group: {{count}}`,staggerTotal:`total: {{minutes}} min`,staggerToPrinters:`Stagger to {{count}} printers`,gcodeInjection:`Inject auto-print G-code`},backup:{includesEncryptionKey:`Local backups include the MFA encryption key file (DATA_DIR/.mfa_encryption_key) so a backup ZIP is self-contained. Treat the ZIP as sensitive — anyone with the file can decrypt the OIDC client secrets and TOTP secrets stored inside.`,title:`Backup & Restore`,createBackup:`Create Backup`,restoreBackup:`Restore Backup`,restoreDescription:`Replace all data from a backup file`,downloadBackup:`Download Backup`,uploadBackup:`Upload Backup`,lastBackup:`Last Backup`,autoBackup:`Auto Backup`,backupNow:`Backup Now`,restoreWarning:`Warning: Restoring a backup will overwrite all current data.`,includeArchives:`Include Archives`,includeSettings:`Include Settings`,includeProfiles:`Include Profiles`,backupSuccess:`Backup created successfully`,restoreSuccess:`Backup restored successfully`,backupFailed:`Backup failed`,restoreFailed:`Restore failed`,restoreNote:`Virtual Printer will be stopped during restore`,githubBackup:`Git Backup`,enabled:`Enabled`,cloudLoginRequired:`Bambu Cloud login required. Sign in under Profiles → Cloud Profiles to enable GitHub backup.`,cloudLoginRequiredShort:`Cloud login required`,githubDescription:`Automatically sync your profiles to a private GitHub repository for backup and version history.`,repoIsPrivate:`Repository is private — safe to back up to.`,repoIsPublicWarning:`Repository is PUBLIC. Bambuddy backups include MQTT credentials, Home Assistant tokens, Prometheus tokens, your Bambu Cloud email, and printer access codes via K-profiles. Saving is blocked until you make the repository private in your provider's settings.`,repoVisibilityUnknown:`Could not determine repository visibility. Bambuddy refuses to back up to anything not confirmed private; saving will be blocked.`,repositoryUrl:`Repository URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Allow insecure HTTP`,allowInsecureHttpHint:`Enable for self-hosted instances on private networks without TLS`,personalAccessToken:`Personal Access Token`,tokenSaved:`(saved)`,enterNewToken:`Enter new token to update`,tokenHint:`Fine-grained token with Contents read/write permission`,branch:`Branch`,provider:`Git Provider`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Manual only`,hourly:`Hourly`,daily:`Daily`,weekly:`Weekly`,includeInBackup:`Include in backup`,kProfiles:`K-Profiles`,kProfilesDescription:`Pressure advance calibration from connected printers`,noPrintersConnected:`No printers connected`,printersConnected:`{{connected}}/{{total}} connected`,cloudProfiles:`Cloud Profiles`,cloudProfilesDescription:`Filament, printer, and process presets from Bambu Cloud`,appSettings:`App Settings`,appSettingsDescription:`Bambuddy configuration (complete database)`,spoolInventory:`Spool Inventory`,spoolInventoryDescription:`Filament spools, usage history, and cost tracking`,printArchives:`Print Archives`,printArchivesDescription:`Print history metadata (no gcode/3MF files)`,lastBackupAt:`Last backup:`,noBackupsYet:`No backups yet`,next:`Next:`,startingBackup:`Starting backup...`,test:`Test`,enableBackup:`Enable Backup`,testConnection:`Test Connection`,enterRepoUrl:`Enter repository URL`,enterRepoAndToken:`Enter repository URL and access token`,repoRequired:`Repository URL is required`,tokenRequired:`Access token is required`,githubBackupEnabled:`GitHub backup enabled`,tokenUpdated:`Token updated`,settingsSaved:`Settings saved`,failedToSave:`Failed to save: {{message}}`,backupCompleteFiles:`Backup complete - {{count}} files updated`,backupSkippedNoChanges:`Backup skipped - no changes`,backupFailed2:`Backup failed: {{message}}`,clearedLogs:`Cleared {{count}} logs`,failedToClearLogs:`Failed to clear logs: {{message}}`,history:`History`,clear:`Clear`,date:`Date`,status:`Status`,commit:`Commit`,localBackup:`Local Backup`,localBackupDescription:`Create a complete backup of your Bambuddy data including the database, archives, uploads, and all files.`,downloadBackupLabel:`Download Backup`,completeBackupZip:`Complete backup: database + all files (ZIP)`,download:`Download`,preparingBackup:`Preparing backup...`,creatingArchive:`Creating backup archive... This may take a while for large archives.`,downloadingFile:`Downloading backup file...`,backupDownloaded:`Backup downloaded successfully`,failedToCreateBackup:`Failed to create backup: {{message}}`,restore:`Restore`,restoreReplacesAll:`Restore replaces all data.`,restoreReplacesAllDetail:`Your current database and files will be completely replaced. A restart is required after restore.`,restoreConfirmTitle:`Restore Backup`,restoreConfirmMessage:`Are you sure you want to restore from "{{filename}}"? This will completely replace your current database and all files. The application will need to be restarted after restore.`,restoreConfirmButton:`Restore Backup`,uploadingFile:`Uploading backup file...`,backupRestoredRestart:`Backup restored. Please restart Bambuddy.`,failedToRestore:`Failed to restore backup. Please check the file format.`,reloadNow:`Reload Now`,creatingBackup:`Creating Backup`,restoringBackup:`Restoring Backup`,preparing:`Preparing...`,processing:`Processing...`,doNotClosePage:`Please do not close this page or navigate away. This operation may take several minutes for large backups.`,restoring:`Restoring...`,restoreComplete:`Restore Complete`,restoreFailed2:`Restore Failed`,importSettings:`Import settings from a backup file`,pleaseWaitRestoring:`Please wait while your data is being restored`,selectBackupFile:`Click to select backup file (.json or .zip)`,duplicateHandling:`How duplicate handling works:`,matchPrinters:`Printers`,matchPrintersBy:`matched by serial number`,matchSmartPlugs:`Smart Plugs`,matchSmartPlugsBy:`matched by IP address`,matchNotificationProviders:`Notification Providers`,matchNotificationProvidersBy:`matched by name`,matchFilaments:`Filaments`,matchFilamentsBy:`matched by name + type + brand`,matchArchives:`Archives`,matchArchivesBy:`matched by content hash (always skipped)`,matchPendingUploads:`Pending Uploads`,matchPendingUploadsBy:`matched by filename`,matchSettingsTemplates:`Settings & Templates`,matchSettingsTemplatesBy:`always overwritten`,replaceExisting:`Replace existing data`,keepExisting:`Keep existing data`,overwriteDescription:`Overwrite items that already exist with backup data`,keepDescription:`Only restore items that don't already exist`,overwriteCaution:`Caution:`,overwriteWarning:`Overwriting will replace your current configurations with data from the backup. Printer access codes are never overwritten for security.`,cancel:`Cancel`,processingBackup:`Processing backup file...`,itemsRestored:`Items Restored`,itemsSkipped:`Items Skipped`,restored:`Restored`,skippedAlreadyExist:`Skipped (already exist)`,filesCategory:`Files (3MF, thumbnails, etc.)`,andMore:`...and {{count}} more`,newApiKeysGenerated:`New API Keys Generated`,keysShownOnce:`These keys are only shown once. Copy them now!`,copy:`Copy`,noDataFound:`No data was found to restore in the backup file.`,close:`Close`,scheduledBackup:`Scheduled Backups`,scheduledBackupDescription:`Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.`,frequency:`Frequency`,backupTime:`Time`,retention:`Retention`,retentionDescription:`Number of backups to keep`,outputPath:`Output Path`,outputPathPlaceholder:`Default: {{path}}`,outputPathDescription:`Leave empty for default location`,runNow:`Run Now`,backupFiles:`Backup Files`,noScheduledBackups:`No backups yet`,deleteBackup:`Delete`,deleteBackupConfirm:`Delete this backup file?`,backupRunning:`Backup in progress...`,scheduledBackupComplete:`Backup completed successfully`,scheduledBackupFailed:`Backup failed`,nextBackup:`Next backup`,backupSize:`Size`,localTimeHint:`Local time ({{tz}})`,defaultPathLabel:`Default:`,categories:{settings:`Settings`,notification_providers:`Notification Providers`,notification_templates:`Notification Templates`,smart_plugs:`Smart Plugs`,printers:`Printers`,filaments:`Filaments`,maintenance_types:`Maintenance Types`,archives:`Archives`,projects:`Projects`,pending_uploads:`Pending Uploads`,external_links:`External Links`,api_keys:`API Keys`}},tags:{title:`Tags`,addTag:`Add Tag`,editTag:`Edit Tag`,deleteTag:`Delete Tag`,tagName:`Tag Name`,tagColor:`Tag Color`,noTags:`No tags`,deleteConfirm:`Are you sure you want to delete this tag?`,manageTags:`Manage Tags`},uploadModal:{title:`Upload 3MF Files`,dragDrop:`Drag & drop .3mf files here`,or:`or`,browseFiles:`Browse Files`,extractionInfo:`The printer model will be automatically extracted from the 3MF file metadata.`,uploaded:`uploaded`,failed:`failed`,uploading:`Uploading...`,upload:`Upload`,uploadFailed:`Upload failed`},editArchive:{title:`Edit Archive`,name:`Name`,namePlaceholder:`Print name`,printer:`Printer`,noPrinter:`No printer`,project:`Project`,noProject:`No project`,itemsPrinted:`Items Printed`,itemsPrintedHelp:`Number of items produced in this print job`,notes:`Notes`,notesPlaceholder:`Add notes about this print...`,externalLink:`External Link`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link to Printables, Thingiverse, or other source`,tags:`Tags`,tagsPlaceholder:`Add tags...`,addMoreTags:`Add more tags...`,matchingTags:`Matching "{{query}}"`,existingTags:`Existing tags`,clickToAdd:`(click to add)`,status:`Status`,failureReason:`Failure Reason`,selectReason:`Select reason...`,photos:`Photos of Printed Result`,photosHelp:`Click + to add photos of your printed result`,printResult:`Print result`,saving:`Saving...`,failureReasons:{adhesionFailure:`Adhesion failure`,spaghettiDetached:`Spaghetti / Detached`,layerShift:`Layer shift`,cloggedNozzle:`Clogged nozzle`,filamentRunout:`Filament runout`,warping:`Warping`,stringing:`Stringing`,underExtrusion:`Under-extrusion`,powerFailure:`Power failure`,userCancelled:`User cancelled`,other:`Other`},statuses:{completed:`Completed`,failed:`Failed`,aborted:`Cancelled`,printing:`Printing`}},kProfiles:{title:`K-Profiles`,noPrintersConfigured:`No Printers Configured`,addPrinterInSettings:`Add a printer in Settings to manage K-profiles`,noActivePrinters:`No Active Printers`,enablePrinterConnection:`Enable a printer connection to view its K-profiles`,loadingProfiles:`Loading K-Profiles...`,printerOffline:`Printer Offline`,printerOfflineDesc:`The selected printer is not connected. Power it on to view K-profiles.`,noMatchingProfiles:`No Matching Profiles`,noMatchingProfilesDesc:`No profiles match your search criteria`,noKProfiles:`No K-Profiles`,noKProfilesDesc:`No pressure advance profiles found for {{diameter}}mm nozzle`,createFirstProfile:`Create First Profile`,printer:`Printer`,nozzle:`Nozzle`,refresh:`Refresh`,addProfile:`Add Profile`,export:`Export`,import:`Import`,select:`Select`,selectAll:`Select All`,delete:`Delete`,searchPlaceholder:`Search by name or filament...`,allExtruders:`All Extruders`,leftOnly:`Left Only`,rightOnly:`Right Only`,allFlow:`All Flow`,hfOnly:`HF Only`,sOnly:`S Only`,sortName:`Sort: Name`,sortKValue:`Sort: K-Value`,sortFilament:`Sort: Filament`,leftExtruder:`Left Extruder`,rightExtruder:`Right Extruder`,modal:{addTitle:`Add K-Profile`,editTitle:`Edit K-Profile`,profileName:`Profile Name`,profileNamePlaceholder:`My PLA Profile`,kValue:`K-Value`,kValuePlaceholder:`0.020`,kValueHelp:`Typical range: 0.01 - 0.06 for PLA, 0.02 - 0.10 for PETG`,filament:`Filament`,selectFilament:`Select filament...`,noFilamentsHelp:`No filaments found. Create a K-profile in Bambu Studio first.`,flowType:`Flow Type`,highFlow:`High Flow`,standard:`Standard`,nozzleSize:`Nozzle Size`,extruder:`Extruder`,extruders:`Extruders`,left:`Left`,right:`Right`,notes:`Notes (stored locally)`,notesPlaceholder:`Add notes about this profile...`,notesHelp:`Notes are saved in Bambuddy, not on the printer`,syncing:`Syncing with printer...`,savingExtruder:`Saving to extruder {{current}}/{{total}}...`,pleaseWait:`Please wait`},deleteConfirm:{title:`Delete Profile`,cannotUndo:`This cannot be undone`,message:`Are you sure you want to delete "{{name}}" from the printer?`},bulkDelete:{title:`Delete Profiles`,cannotUndo:`This cannot be undone`,message:`Are you sure you want to delete {{count}} selected profiles from the printer?`},toast:{profileSaved:`K-profile saved`,profilesSaved:`K-profile saved to {{count}} extruders`,selectAtLeastOneExtruder:`Please select at least one extruder`,profileDeleted:`K-profile deleted`,profilesDeleted:`Deleted {{count}} profiles`,exportedProfiles:`Exported {{count}} profiles`,importedProfiles:`Imported {{count}} of {{total}} profiles`,noProfilesToExport:`No profiles to export`,invalidFileFormat:`Invalid file format`,failedToParseImport:`Failed to parse import file`,failedToSaveBatch:`Failed to save K-profiles`,noteSaved:`Note saved`,failedToSaveNote:`Failed to save note`},permission:{noRead:`You do not have permission to refresh profiles`,noCreate:`You do not have permission to add profiles`,noUpdate:`You do not have permission to update K-profiles`,noDelete:`You do not have permission to delete K-profiles`,noExport:`You do not have permission to export profiles`,noImport:`You do not have permission to import profiles`}},virtualPrinter:{title:`Virtual Printer`,running:`Running`,stopped:`Stopped`,description:{default:`Enable a virtual printer that appears in Bambu Studio and OrcaSlicer. Files sent to this printer will be archived directly without printing.`,proxy:`Enable a proxy that relays slicer traffic to a real printer, allowing remote printing over any network.`},enable:{title:`Enable Virtual Printer`,visibleInSlicer:`Visible as "Bambuddy" in slicer discovery`,proxyingTo:`Proxying to {{name}}`,notActive:`Not active`},model:{title:`Printer Model`,description:`Select which printer model to emulate.`,restartWarning:`Changing the model will restart the virtual printer`},accessCode:{title:`Access Code`,isSet:`Access code is set`,notSet:`No access code set - required to enable`,placeholder:`Enter 8-char code`,placeholderChange:`Enter new code to change`,hint:`Must be exactly 8 characters. Used by slicers to authenticate.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Inherited from target`,derivedFromTargetHint:`Uses the target printer's access code. The bridge forwards slicer auth to the real printer, so the codes must match — edit the printer's access code to change this value.`,reveal:`Show access code`,hide:`Hide access code`},targetPrinter:{title:`Target Printer`,configured:`Proxy target configured`,notConfigured:`No target printer selected - required for proxy mode`,placeholder:`Select a printer...`,hint:`Select the printer to proxy slicer traffic to. The printer must be in LAN mode.`,noPrinters:`No printers configured. Add a printer first to use proxy mode.`},remoteInterface:{title:`Network Interface Override`,configured:`Interface override active`,optional:`Optional - use if auto-detected IP is wrong (e.g. multiple NICs, Docker, VPN)`,placeholder:`Auto-detect (default)...`,hint:`Override the IP address advertised via SSDP and used in the TLS certificate. Useful when Bambuddy has multiple network interfaces.`},mode:{title:`Mode`,archive:`Archive`,archiveDesc:`Archive files immediately`,review:`Review`,reviewDesc:`Review before archiving`,queue:`Queue`,queueDesc:`Archive and add to queue`,proxy:`Proxy`,proxyDesc:`Relay to real printer`},autoDispatch:{title:`Auto-dispatch`,description:`Automatically start prints when added to queue. When off, prints wait for manual dispatch.`},queueForceColorMatch:{title:`Force color match`,description:`Refuse to dispatch onto a printer that does not have the exact filament type and color loaded. Off by default — without this, the queue uses model-only matching and may pick a printer with the wrong color loaded.`},gcodeInjection:{title:`G-code injection`,description:`Apply the per-model G-code snippets configured in Settings to jobs from this VP. Off by default.`},tailscaleDisabled:{title:`Tailscale integration`,description:`Enable to mark this VP as exposed over Tailscale. Shows the host's Tailscale address so you know which IP to paste into the slicer. The CA-import step is unchanged — this toggle has no effect on certificates.`},setupRequired:{title:`Setup Required`,description:`The virtual printer feature requires additional system configuration before it will work. This includes port forwarding, firewall rules, and platform-specific settings.`,readGuide:`Read the setup guide before enabling`},archiveNameSource:{title:`Archive name source`,description:`Choose how new archives are named when files arrive via the virtual printer. "Metadata" uses the slicer-embedded Title from the 3MF (default). "Filename" uses the filename Bambu Studio sent over FTP. Note: Bambu Studio overwrites the name you type in the "send to printer" dialog with the 3MF's Title field whenever one is present, so both modes often produce the same string.`,metadata:`Metadata`,filename:`Filename`},caCert:{title:`Slicer certificate`,description:`Virtual printers use a TLS certificate signed by the Bambuddy CA. Import this CA certificate into your slicer's trust store once so it accepts the connection — no need to copy it from the command line.`,copy:`Copy`,copied:`Copied`,download:`Download`,fingerprint:`SHA-256`},howItWorks:{title:`How it works`,step1:`On the same LAN, virtual printers appear in your slicer (Bambu Studio / OrcaSlicer) automatically via discovery. From other networks, add them manually by IP address and access code.`,step2:`In Archive, Review, and Queue modes, use the "Send" button in your slicer to upload 3MF files to Bambuddy. The slicer will show "Print success" — the file is stored, not printed.`,step3:`In Proxy mode, the virtual printer relays all traffic to a real printer — prints start immediately as if connected directly.`},status:{title:`Status Details`,printerName:`Printer Name`,model:`Model`,serialNumber:`Serial Number`,mode:`Mode`,pendingFiles:`Pending Files`,targetPrinter:`Target Printer`,ftpPort:`FTP Port`,mqttPort:`MQTT Port`,ftpConnections:`FTP Connections`,mqttConnections:`MQTT Connections`},toast:{updated:`Virtual printer settings updated`,failedToUpdate:`Failed to update settings`,copyFailed:`Failed to copy — try selecting the text manually`,accessCodeRequired:`Please set an access code first`,targetPrinterRequired:`Please select a target printer first`,bindIpRequired:`Please set a bind IP first`,accessCodeEmpty:`Access code cannot be empty`,accessCodeLength:`Access code must be exactly 8 characters`,targetCodeChangedRebind:`Access code now matches the new target printer. Re-add this device in your slicer to pick up the new code.`,created:`Virtual printer created`,failedToCreate:`Failed to create virtual printer`,deleted:`Virtual printer deleted`,failedToDelete:`Failed to delete virtual printer`},list:{title:`Virtual Printers`,add:`Add`,addFirst:`Add Virtual Printer`,empty:`No virtual printers configured. Add one to get started.`},bindIp:{title:`Bind Interface`,placeholder:`Select interface...`,hint:`Network interface for this virtual printer to bind to. Must be unique per printer.`},proxy:{accessCodeHint:`In proxy mode, use your target printer's access code in the slicer. The connection is forwarded transparently to the real printer.`},addDialog:{title:`Add Virtual Printer`,name:`Name`,hint:`You can configure access code, target printer, and other settings after creating.`,create:`Create`},deleteConfirm:{title:`Delete Virtual Printer`,message:`Are you sure you want to delete "{{name}}"? This will stop all services for this printer.`}},modelViewer:{openInSlicer:`Open in Slicer`,tabs:{model:`3D Model`,gcode:`G-code Preview`},notAvailable:`not available`,notSliced:`not sliced`,plates:`Plates`,allPlates:`All Plates`,plateNumber:`Plate {{number}}`,plateCount:`{{count}} plate`,plateCount_other:`{{count}} plates`,objectCount:`{{count}} object`,objectCount_other:`{{count}} objects`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filaments`,eta:`ETA {{minutes}} min`,noPreview:`No preview available for this file`,pagination:{pageOf:`Page {{current}} of {{total}}`,prev:`Prev`,next:`Next`},errors:{failedToLoad:`Failed to load file`,noMeshes:`No meshes found in 3MF file`,unsupportedFormat:`Unsupported file format`}},maintenanceDescriptions:{lubricateCarbonRods:`Apply lubricant to carbon rods for smooth motion`,lubricateRails:`Apply lubricant to linear rails for smooth motion`,cleanNozzle:`Clean hotend and nozzle to prevent clogs`,checkBelts:`Verify belt tension for accurate prints`,cleanBuildPlate:`Clean build plate for better adhesion`,checkExtruder:`Inspect extruder gears for wear`,checkCooling:`Ensure cooling fans are working properly`,generalInspection:`General printer inspection`,cleanCarbonRods:`Clean carbon rods to reduce friction`,lubricateSteelRods:`Apply lubricant to steel rods for smooth motion`,cleanSteelRods:`Clean steel rods to reduce friction`,cleanLinearRails:`Wipe linear rails to remove dust and debris`,checkPtfeTube:`Inspect PTFE tube for wear or damage`,replaceHepaFilter:`Replace HEPA filter for air quality`,replaceCarbonFilter:`Replace activated carbon filter`,lubricateLeftNozzleRail:`Lubricate left nozzle rail (H2 series)`},smartPlugs:{offline:`Offline`,admin:`Admin`,openPlugAdminPage:`Open plug admin page`,deleteSmartPlug:`Delete Smart Plug`,turnOnSmartPlug:`Turn On Smart Plug`,turnOffSmartPlug:`Turn Off Smart Plug`,turnOn:`Turn On`,turnOff:`Turn Off`,addSmartPlug:{scanningNetwork:`Scanning network...`,chooseEntity:`Choose an entity...`,connectionFailed:`Connection failed`,searchEntities:`Search entities...`,searchPowerSensors:`Search power sensors...`,searchEnergySensors:`Search energy sensors...`,placeholders:{plugName:`Living Room Plug`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Same as power topic, or different`}},linkedTo:`Linked to:`,monitorOnly:`Monitor Only`,alerts:`Alerts`,scheduleOn:`On {{time}}`,scheduleOff:`Off {{time}}`,on:`On`,off:`Off`,power:`Power`,kwhToday:`kWh Today`,settings:`Settings`,automationSettings:`Automation Settings`,showInSwitchbar:`Show in Switchbar`,quickAccessSidebar:`Quick access from sidebar`,enabled:`Enabled`,enableAutomation:`Enable automation for this plug`,autoOn:`Auto On`,autoOnDescription:`Turn on when print starts`,autoOff:`Auto Off`,autoOffDescription:`Turn off when print completes (one-shot)`,autoOffPersistent:`Keep Enabled`,autoOffPersistentDescription:`Stay enabled between prints instead of one-shot`,autoOffAfterDrying:`Auto Off After Drying`,autoOffAfterDryingDescription:`Turn off when AMS drying completes`,delayAfterDryingMinutes:`Drying delay (minutes)`,turnOffDelayMode:`Turn Off Delay Mode`,time:`Time`,temp:`Temp`,delayMinutes:`Delay (minutes)`,tempThreshold:`Temperature threshold (°C)`,tempThresholdDescription:`Turns off when nozzle cools below this temperature`,edit:`Edit`,deleteConfirm:`Are you sure you want to delete "{{name}}"? This cannot be undone.`,turnOnConfirm:`Are you sure you want to turn on "{{name}}"?`,turnOffConfirm:`Are you sure you want to turn off "{{name}}"? This will cut power to the connected device.`,failedToTurn:`Failed to turn {{action}} "{{name}}"`,unknown:`Unknown`,addTitle:`Add Smart Plug`,editTitle:`Edit Smart Plug`,stopScanning:`Stop Scanning`,discoverTasmota:`Discover Tasmota Devices`,foundDevices:`Found {{count}} device(s) - click to select:`,noDevicesFound:`No Tasmota devices found on your network`,haNotConfigured:`Home Assistant is not configured. Set it up in`,haSettingsPath:`Settings → Network → Home Assistant`,selectEntity:`Select Entity *`,ipAddress:`IP Address *`,nameLabel:`Name *`,username:`Username`,password:`Password`,authHint:`Leave empty if your Tasmota device doesn't require authentication`,linkToPrinter:`Link to Printer`,noPrinter:`No printer (manual control only)`,linkingDescription:`Linking enables automatic on/off when prints start/complete`,powerAlerts:`Power Alerts`,alertAbove:`Alert if above (W)`,alertBelow:`Alert if below (W)`,alertDescription:`Get notified when power consumption crosses these thresholds. Leave empty to disable that direction.`,dailySchedule:`Daily Schedule`,turnOnAt:`Turn On at`,turnOffAt:`Turn Off at`,scheduleDescription:`Automatically turn the plug on/off at these times daily. Leave empty to skip that action.`,showOnPrinterCard:`Show on Printer Card`,displayOnPrinterCard:`Display button on printer card`,connectedResult:`Connected!`,deviceLabel:`Device: {{name}} - `,stateLabel:`State: {{state}}`,test:`Test`,delete:`Delete`,save:`Save`,add:`Add`,cancel:`Cancel`,failedToStartScan:`Failed to start scan`,nameRequired:`Name is required`,entityRequired:`Entity is required for Home Assistant plugs`,mqttTopicRequired:`At least one MQTT topic must be configured for power, energy, or state monitoring`,loadingEntities:`Loading entities...`,loading:`Loading...`,failedToLoadEntities:`Failed to load entities: {{error}}`,noEntitiesMatching:`No entities found matching "{{search}}"`,noEntitiesAvailable:`No entities available`,searchingEntities:`Searching all entities ({{count}} found)`,showingEntities:`Showing switch, light, input_boolean ({{count}} available)`,energyMonitoringOptional:`Energy Monitoring (Optional)`,energyMonitoringHint:`Search and select sensors that provide power/energy data.`,powerSensorW:`Power Sensor (W)`,energyTodayKwh:`Energy Today (kWh)`,totalEnergyKwh:`Total Energy (kWh)`,noMatchingSensors:`No matching sensors`,none:`None`,mqttNotConfigured:`MQTT broker not configured. Set broker address in`,mqttSettingsPath:`Settings → Network → MQTT Publishing`,mqttNotConfiguredSuffix:`(you don't need to enable publishing, just fill in the broker details).`,mqttMonitorOnlyDescription:`MQTT plugs receive power/energy data via MQTT subscription. On/off control is not available - use your MQTT broker or home automation system.`,powerMonitoring:`Power Monitoring`,energyMonitoring:`Energy Monitoring`,stateMonitoring:`State Monitoring`,optional:`optional`,topic:`Topic`,jsonPath:`JSON Path`,multiplier:`Multiplier`,onValue:`ON Value`,mqttPowerHint:`JSON path extracts value from JSON payload (e.g., "power_l1"). Leave empty if topic publishes raw numeric values. +`+e.stack}}var me=Object.prototype.hasOwnProperty,he=t.unstable_scheduleCallback,ge=t.unstable_cancelCallback,_e=t.unstable_shouldYield,ve=t.unstable_requestPaint,ye=t.unstable_now,be=t.unstable_getCurrentPriorityLevel,xe=t.unstable_ImmediatePriority,Se=t.unstable_UserBlockingPriority,Ce=t.unstable_NormalPriority,we=t.unstable_LowPriority,Te=t.unstable_IdlePriority,Ee=t.log,De=t.unstable_setDisableYieldValue,Oe=null,ke=null;function Ae(e){if(typeof Ee==`function`&&De(e),ke&&typeof ke.setStrictMode==`function`)try{ke.setStrictMode(Oe,e)}catch{}}var je=Math.clz32?Math.clz32:Pe,Me=Math.log,Ne=Math.LN2;function Pe(e){return e>>>=0,e===0?32:31-(Me(e)/Ne|0)|0}var Fe=256,Ie=262144,Le=4194304;function Re(e){var t=e&42;if(t!==0)return t;switch(e&-e){case 1:return 1;case 2:return 2;case 4:return 4;case 8:return 8;case 16:return 16;case 32:return 32;case 64:return 64;case 128:return 128;case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:return e&261888;case 262144:case 524288:case 1048576:case 2097152:return e&3932160;case 4194304:case 8388608:case 16777216:case 33554432:return e&62914560;case 67108864:return 67108864;case 134217728:return 134217728;case 268435456:return 268435456;case 536870912:return 536870912;case 1073741824:return 0;default:return e}}function ze(e,t,n){var r=e.pendingLanes;if(r===0)return 0;var i=0,a=e.suspendedLanes,o=e.pingedLanes;e=e.warmLanes;var s=r&134217727;return s===0?(s=r&~a,s===0?o===0?n||(n=r&~e,n!==0&&(i=Re(n))):i=Re(o):i=Re(s)):(r=s&~a,r===0?(o&=s,o===0?n||(n=s&~e,n!==0&&(i=Re(n))):i=Re(o)):i=Re(r)),i===0?0:t!==0&&t!==i&&(t&a)===0&&(a=i&-i,n=t&-t,a>=n||a===32&&n&4194048)?t:i}function Be(e,t){return(e.pendingLanes&~(e.suspendedLanes&~e.pingedLanes)&t)===0}function Ve(e,t){switch(e){case 1:case 2:case 4:case 8:case 64:return t+250;case 16:case 32:case 128:case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:case 262144:case 524288:case 1048576:case 2097152:return t+5e3;case 4194304:case 8388608:case 16777216:case 33554432:return-1;case 67108864:case 134217728:case 268435456:case 536870912:case 1073741824:return-1;default:return-1}}function He(){var e=Le;return Le<<=1,!(Le&62914560)&&(Le=4194304),e}function Ue(e){for(var t=[],n=0;31>n;n++)t.push(e);return t}function We(e,t){e.pendingLanes|=t,t!==268435456&&(e.suspendedLanes=0,e.pingedLanes=0,e.warmLanes=0)}function Ge(e,t,n,r,i,a){var o=e.pendingLanes;e.pendingLanes=n,e.suspendedLanes=0,e.pingedLanes=0,e.warmLanes=0,e.expiredLanes&=n,e.entangledLanes&=n,e.errorRecoveryDisabledLanes&=n,e.shellSuspendCounter=0;var s=e.entanglements,c=e.expirationTimes,l=e.hiddenUpdates;for(n=o&~n;0`u`||window.document===void 0||window.document.createElement===void 0),nn=!1;if(tn)try{var rn={};Object.defineProperty(rn,"passive",{get:function(){nn=!0}}),window.addEventListener(`test`,rn,rn),window.removeEventListener(`test`,rn,rn)}catch{nn=!1}var an=null,on=null,sn=null;function cn(){if(sn)return sn;var e,t=on,n=t.length,r,i=`value`in an?an.value:an.textContent,a=i.length;for(e=0;e=Bn),Un=` `,Wn=!1;function Gn(e,t){switch(e){case`keyup`:return Rn.indexOf(t.keyCode)!==-1;case`keydown`:return t.keyCode!==229;case`keypress`:case`mousedown`:case`focusout`:return!0;default:return!1}}function Kn(e){return e=e.detail,typeof e==`object`&&`data`in e?e.data:null}var qn=!1;function Jn(e,t){switch(e){case`compositionend`:return Kn(t);case`keypress`:return t.which===32?(Wn=!0,Un):null;case`textInput`:return e=t.data,e===Un&&Wn?null:e;default:return null}}function Yn(e,t){if(qn)return e===`compositionend`||!zn&&Gn(e,t)?(e=cn(),sn=on=an=null,qn=!1,e):null;switch(e){case`paste`:return null;case`keypress`:if(!(t.ctrlKey||t.altKey||t.metaKey)||t.ctrlKey&&t.altKey){if(t.char&&1=t)return{node:n,offset:t-e};e=r}a:{for(;n;){if(n.nextSibling){n=n.nextSibling;break a}n=n.parentNode}n=void 0}n=_r(n)}}function yr(e,t){return e&&t?e===t?!0:e&&e.nodeType===3?!1:t&&t.nodeType===3?yr(e,t.parentNode):`contains`in e?e.contains(t):e.compareDocumentPosition?!!(e.compareDocumentPosition(t)&16):!1:!1}function br(e){e=e!=null&&e.ownerDocument!=null&&e.ownerDocument.defaultView!=null?e.ownerDocument.defaultView:window;for(var t=At(e.document);t instanceof e.HTMLIFrameElement;){try{var n=typeof t.contentWindow.location.href==`string`}catch{n=!1}if(n)e=t.contentWindow;else break;t=At(e.document)}return t}function xr(e){var t=e&&e.nodeName&&e.nodeName.toLowerCase();return t&&(t===`input`&&(e.type===`text`||e.type===`search`||e.type===`tel`||e.type===`url`||e.type===`password`)||t===`textarea`||e.contentEditable===`true`)}var Sr=tn&&`documentMode`in document&&11>=document.documentMode,Cr=null,wr=null,Tr=null,Er=!1;function Dr(e,t,n){var r=n.window===n?n.document:n.nodeType===9?n:n.ownerDocument;Er||Cr==null||Cr!==At(r)||(r=Cr,`selectionStart`in r&&xr(r)?r={start:r.selectionStart,end:r.selectionEnd}:(r=(r.ownerDocument&&r.ownerDocument.defaultView||window).getSelection(),r={anchorNode:r.anchorNode,anchorOffset:r.anchorOffset,focusNode:r.focusNode,focusOffset:r.focusOffset}),Tr&&gr(Tr,r)||(Tr=r,r=Dd(wr,`onSelect`),0>=o,i-=o,yi=1<<32-je(t)+i|n<h?(g=d,d=null):g=d.sibling;var _=p(i,d,s[h],c);if(_===null){d===null&&(d=g);break}e&&d&&_.alternate===null&&t(i,d),a=o(_,a,h),u===null?l=_:u.sibling=_,u=_,d=g}if(h===s.length)return n(i,d),Oi&&xi(i,h),l;if(d===null){for(;hg?(_=h,h=null):_=h.sibling;var y=p(a,h,v.value,l);if(y===null){h===null&&(h=_);break}e&&h&&y.alternate===null&&t(a,h),s=o(y,s,g),d===null?u=y:d.sibling=y,d=y,h=_}if(v.done)return n(a,h),Oi&&xi(a,g),u;if(h===null){for(;!v.done;g++,v=c.next())v=f(a,v.value,l),v!==null&&(s=o(v,s,g),d===null?u=v:d.sibling=v,d=v);return Oi&&xi(a,g),u}for(h=r(h);!v.done;g++,v=c.next())v=m(h,a,g,v.value,l),v!==null&&(e&&v.alternate!==null&&h.delete(v.key===null?g:v.key),s=o(v,s,g),d===null?u=v:d.sibling=v,d=v);return e&&h.forEach(function(e){return t(a,e)}),Oi&&xi(a,g),u}function b(e,r,o,c){if(typeof o==`object`&&o&&o.type===y&&o.key===null&&(o=o.props.children),typeof o==`object`&&o){switch(o.$$typeof){case _:a:{for(var l=o.key;r!==null;){if(r.key===l){if(l=o.type,l===y){if(r.tag===7){n(e,r.sibling),c=a(r,o.props.children),c.return=e,e=c;break a}}else if(r.elementType===l||typeof l==`object`&&l&&l.$$typeof===O&&Sa(l)===r.type){n(e,r.sibling),c=a(r,o.props),ka(c,o),c.return=e,e=c;break a}n(e,r);break}else t(e,r);r=r.sibling}o.type===y?(c=oi(o.props.children,e.mode,c,o.key),c.return=e,e=c):(c=ai(o.type,o.key,o.props,null,e.mode,c),ka(c,o),c.return=e,e=c)}return s(e);case v:a:{for(l=o.key;r!==null;){if(r.key===l)if(r.tag===4&&r.stateNode.containerInfo===o.containerInfo&&r.stateNode.implementation===o.implementation){n(e,r.sibling),c=a(r,o.children||[]),c.return=e,e=c;break a}else{n(e,r);break}else t(e,r);r=r.sibling}c=li(o,e.mode,c),c.return=e,e=c}return s(e);case O:return o=Sa(o),b(e,r,o,c)}if(F(o))return h(e,r,o,c);if(M(o)){if(l=M(o),typeof l!=`function`)throw Error(i(150));return o=l.call(o),g(e,r,o,c)}if(typeof o.then==`function`)return b(e,r,Oa(o),c);if(o.$$typeof===C)return b(e,r,Xi(e,o),c);Aa(e,o)}return typeof o==`string`&&o!==``||typeof o==`number`||typeof o==`bigint`?(o=``+o,r!==null&&r.tag===6?(n(e,r.sibling),c=a(r,o),c.return=e,e=c):(n(e,r),c=si(o,e.mode,c),c.return=e,e=c),s(e)):n(e,r)}return function(e,t,n,r){try{Da=0;var i=b(e,t,n,r);return Ea=null,i}catch(t){if(t===ga||t===va)throw t;var a=ti(29,t,null,e.mode);return a.lanes=r,a.return=e,a}}}var Ma=ja(!0),Na=ja(!1),Pa=!1;function Fa(e){e.updateQueue={baseState:e.memoizedState,firstBaseUpdate:null,lastBaseUpdate:null,shared:{pending:null,lanes:0,hiddenCallbacks:null},callbacks:null}}function Ia(e,t){e=e.updateQueue,t.updateQueue===e&&(t.updateQueue={baseState:e.baseState,firstBaseUpdate:e.firstBaseUpdate,lastBaseUpdate:e.lastBaseUpdate,shared:e.shared,callbacks:null})}function La(e){return{lane:e,tag:0,payload:null,callback:null,next:null}}function Ra(e,t,n){var r=e.updateQueue;if(r===null)return null;if(r=r.shared,Fl&2){var i=r.pending;return i===null?t.next=t:(t.next=i.next,i.next=t),r.pending=t,t=Qr(e),Zr(e,null,n),t}return Jr(e,r,t,n),Qr(e)}function za(e,t,n){if(t=t.updateQueue,t!==null&&(t=t.shared,n&4194048)){var r=t.lanes;r&=e.pendingLanes,n|=r,t.lanes=n,qe(e,n)}}function Ba(e,t){var n=e.updateQueue,r=e.alternate;if(r!==null&&(r=r.updateQueue,n===r)){var i=null,a=null;if(n=n.firstBaseUpdate,n!==null){do{var o={lane:n.lane,tag:n.tag,payload:n.payload,callback:null,next:null};a===null?i=a=o:a=a.next=o,n=n.next}while(n!==null);a===null?i=a=t:a=a.next=t}else i=a=t;n={baseState:r.baseState,firstBaseUpdate:i,lastBaseUpdate:a,shared:r.shared,callbacks:r.callbacks},e.updateQueue=n;return}e=n.lastBaseUpdate,e===null?n.firstBaseUpdate=t:e.next=t,n.lastBaseUpdate=t}var Va=!1;function Ha(){if(Va){var e=sa;if(e!==null)throw e}}function Ua(e,t,n,r){Va=!1;var i=e.updateQueue;Pa=!1;var a=i.firstBaseUpdate,o=i.lastBaseUpdate,s=i.shared.pending;if(s!==null){i.shared.pending=null;var c=s,l=c.next;c.next=null,o===null?a=l:o.next=l,o=c;var u=e.alternate;u!==null&&(u=u.updateQueue,s=u.lastBaseUpdate,s!==o&&(s===null?u.firstBaseUpdate=l:s.next=l,u.lastBaseUpdate=c))}if(a!==null){var d=i.baseState;o=0,u=l=c=null,s=a;do{var f=s.lane&-536870913,m=f!==s.lane;if(m?(Rl&f)===f:(r&f)===f){f!==0&&f===oa&&(Va=!0),u!==null&&(u=u.next={lane:0,tag:s.tag,payload:s.payload,callback:null,next:null});a:{var h=e,g=s;f=t;var _=n;switch(g.tag){case 1:if(h=g.payload,typeof h==`function`){d=h.call(_,d,f);break a}d=h;break a;case 3:h.flags=h.flags&-65537|128;case 0:if(h=g.payload,f=typeof h==`function`?h.call(_,d,f):h,f==null)break a;d=p({},d,f);break a;case 2:Pa=!0}}f=s.callback,f!==null&&(e.flags|=64,m&&(e.flags|=8192),m=i.callbacks,m===null?i.callbacks=[f]:m.push(f))}else m={lane:f,tag:s.tag,payload:s.payload,callback:s.callback,next:null},u===null?(l=u=m,c=d):u=u.next=m,o|=f;if(s=s.next,s===null){if(s=i.shared.pending,s===null)break;m=s,s=m.next,m.next=null,i.lastBaseUpdate=m,i.shared.pending=null}}while(1);u===null&&(c=d),i.baseState=c,i.firstBaseUpdate=l,i.lastBaseUpdate=u,a===null&&(i.shared.lanes=0),Kl|=o,e.lanes=o,e.memoizedState=d}}function Wa(e,t){if(typeof e!=`function`)throw Error(i(191,e));e.call(t)}function Ga(e,t){var n=e.callbacks;if(n!==null)for(e.callbacks=null,e=0;ea?a:8;var o=I.T,s={};I.T=s,ks(e,!1,t,n);try{var c=i(),l=I.S;l!==null&&l(s,c),typeof c==`object`&&c&&typeof c.then==`function`?Os(e,t,ua(c,r),mu(e)):Os(e,t,r,mu(e))}catch(n){Os(e,t,{then:function(){},status:`rejected`,reason:n},mu())}finally{L.p=a,o!==null&&s.types!==null&&(o.types=s.types),I.T=o}}function vs(){}function ys(e,t,n,r){if(e.tag!==5)throw Error(i(476));var a=bs(e).queue;_s(e,a,t,R,n===null?vs:function(){return xs(e),n(r)})}function bs(e){var t=e.memoizedState;if(t!==null)return t;t={memoizedState:R,baseState:R,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:ko,lastRenderedState:R},next:null};var n={};return t.next={memoizedState:n,baseState:n,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:ko,lastRenderedState:n},next:null},e.memoizedState=t,e=e.alternate,e!==null&&(e.memoizedState=t),t}function xs(e){var t=bs(e);t.next===null&&(t=e.alternate.memoizedState),Os(e,t.next.queue,{},mu())}function Ss(){return Yi($f)}function Cs(){return To().memoizedState}function ws(){return To().memoizedState}function Ts(e){for(var t=e.return;t!==null;){switch(t.tag){case 24:case 3:var n=mu();e=La(n);var r=Ra(t,e,n);r!==null&&(gu(r,t,n),za(r,t,n)),t={cache:na()},e.payload=t;return}t=t.return}}function Es(e,t,n){var r=mu();n={lane:r,revertLane:0,gesture:null,action:n,hasEagerState:!1,eagerState:null,next:null},As(e)?js(t,n):(n=Yr(e,t,n,r),n!==null&&(gu(n,e,r),Ms(n,t,r)))}function Ds(e,t,n){Os(e,t,n,mu())}function Os(e,t,n,r){var i={lane:r,revertLane:0,gesture:null,action:n,hasEagerState:!1,eagerState:null,next:null};if(As(e))js(t,i);else{var a=e.alternate;if(e.lanes===0&&(a===null||a.lanes===0)&&(a=t.lastRenderedReducer,a!==null))try{var o=t.lastRenderedState,s=a(o,n);if(i.hasEagerState=!0,i.eagerState=s,hr(s,o))return Jr(e,t,i,0),Il===null&&qr(),!1}catch{}if(n=Yr(e,t,i,r),n!==null)return gu(n,e,r),Ms(n,t,r),!0}return!1}function ks(e,t,n,r){if(r={lane:2,revertLane:dd(),gesture:null,action:r,hasEagerState:!1,eagerState:null,next:null},As(e)){if(t)throw Error(i(479))}else t=Yr(e,n,r,2),t!==null&&gu(t,e,2)}function As(e){var t=e.alternate;return e===oo||t!==null&&t===oo}function js(e,t){uo=lo=!0;var n=e.pending;n===null?t.next=t:(t.next=n.next,n.next=t),e.pending=t}function Ms(e,t,n){if(n&4194048){var r=t.lanes;r&=e.pendingLanes,n|=r,t.lanes=n,qe(e,n)}}var Ns={readContext:Yi,use:Do,useCallback:_o,useContext:_o,useEffect:_o,useImperativeHandle:_o,useLayoutEffect:_o,useInsertionEffect:_o,useMemo:_o,useReducer:_o,useRef:_o,useState:_o,useDebugValue:_o,useDeferredValue:_o,useTransition:_o,useSyncExternalStore:_o,useId:_o,useHostTransitionStatus:_o,useFormState:_o,useActionState:_o,useOptimistic:_o,useMemoCache:_o,useCacheRefresh:_o};Ns.useEffectEvent=_o;var Ps={readContext:Yi,use:Do,useCallback:function(e,t){return wo().memoizedState=[e,t===void 0?null:t],e},useContext:Yi,useEffect:rs,useImperativeHandle:function(e,t,n){n=n==null?null:n.concat([e]),ts(4194308,4,us.bind(null,t,e),n)},useLayoutEffect:function(e,t){return ts(4194308,4,e,t)},useInsertionEffect:function(e,t){ts(4,2,e,t)},useMemo:function(e,t){var n=wo();t=t===void 0?null:t;var r=e();if(fo){Ae(!0);try{e()}finally{Ae(!1)}}return n.memoizedState=[r,t],r},useReducer:function(e,t,n){var r=wo();if(n!==void 0){var i=n(t);if(fo){Ae(!0);try{n(t)}finally{Ae(!1)}}}else i=t;return r.memoizedState=r.baseState=i,e={pending:null,lanes:0,dispatch:null,lastRenderedReducer:e,lastRenderedState:i},r.queue=e,e=e.dispatch=Es.bind(null,oo,e),[r.memoizedState,e]},useRef:function(e){var t=wo();return e={current:e},t.memoizedState=e},useState:function(e){e=zo(e);var t=e.queue,n=Ds.bind(null,oo,t);return t.dispatch=n,[e.memoizedState,n]},useDebugValue:fs,useDeferredValue:function(e,t){return hs(wo(),e,t)},useTransition:function(){var e=zo(!1);return e=_s.bind(null,oo,e.queue,!0,!1),wo().memoizedState=e,[!1,e]},useSyncExternalStore:function(e,t,n){var r=oo,a=wo();if(Oi){if(n===void 0)throw Error(i(407));n=n()}else{if(n=t(),Il===null)throw Error(i(349));Rl&127||Po(r,t,n)}a.memoizedState=n;var o={value:n,getSnapshot:t};return a.queue=o,rs(Io.bind(null,r,o,e),[e]),r.flags|=2048,$o(9,{destroy:void 0},Fo.bind(null,r,o,n,t),null),n},useId:function(){var e=wo(),t=Il.identifierPrefix;if(Oi){var n=bi,r=yi;n=(r&~(1<<32-je(r)-1)).toString(32)+n,t=`_`+t+`R_`+n,n=po++,0<\/script>`,o=o.removeChild(o.firstChild);break;case`select`:o=typeof r.is==`string`?s.createElement(`select`,{is:r.is}):s.createElement(`select`),r.multiple?o.multiple=!0:r.size&&(o.size=r.size);break;default:o=typeof r.is==`string`?s.createElement(a,{is:r.is}):s.createElement(a)}}o[et]=t,o[tt]=r;a:for(s=t.child;s!==null;){if(s.tag===5||s.tag===6)o.appendChild(s.stateNode);else if(s.tag!==4&&s.tag!==27&&s.child!==null){s.child.return=s,s=s.child;continue}if(s===t)break a;for(;s.sibling===null;){if(s.return===null||s.return===t)break a;s=s.return}s.sibling.return=s.return,s=s.sibling}t.stateNode=o;a:switch(Fd(o,a,r),a){case`button`:case`input`:case`select`:case`textarea`:r=!!r.autoFocus;break a;case`img`:r=!0;break a;default:r=!1}r&&Oc(t)}}return Nc(t),kc(t,t.type,e===null?null:e.memoizedProps,t.pendingProps,n),null;case 6:if(e&&t.stateNode!=null)e.memoizedProps!==r&&Oc(t);else{if(typeof r!=`string`&&t.stateNode===null)throw Error(i(166));if(e=re.current,Fi(t)){if(e=t.stateNode,n=t.memoizedProps,r=null,a=Ei,a!==null)switch(a.tag){case 27:case 5:r=a.memoizedProps}e[et]=t,e=!!(e.nodeValue===n||r!==null&&!0===r.suppressHydrationWarning||Md(e.nodeValue,n)),e||Mi(t,!0)}else e=Vd(e).createTextNode(r),e[et]=t,t.stateNode=e}return Nc(t),null;case 31:if(n=t.memoizedState,e===null||e.memoizedState!==null){if(r=Fi(t),n!==null){if(e===null){if(!r)throw Error(i(318));if(e=t.memoizedState,e=e===null?null:e.dehydrated,!e)throw Error(i(557));e[et]=t}else Ii(),!(t.flags&128)&&(t.memoizedState=null),t.flags|=4;Nc(t),e=!1}else n=Li(),e!==null&&e.memoizedState!==null&&(e.memoizedState.hydrationErrors=n),e=!0;if(!e)return t.flags&256?(no(t),t):(no(t),null);if(t.flags&128)throw Error(i(558))}return Nc(t),null;case 13:if(r=t.memoizedState,e===null||e.memoizedState!==null&&e.memoizedState.dehydrated!==null){if(a=Fi(t),r!==null&&r.dehydrated!==null){if(e===null){if(!a)throw Error(i(318));if(a=t.memoizedState,a=a===null?null:a.dehydrated,!a)throw Error(i(317));a[et]=t}else Ii(),!(t.flags&128)&&(t.memoizedState=null),t.flags|=4;Nc(t),a=!1}else a=Li(),e!==null&&e.memoizedState!==null&&(e.memoizedState.hydrationErrors=a),a=!0;if(!a)return t.flags&256?(no(t),t):(no(t),null)}return no(t),t.flags&128?(t.lanes=n,t):(n=r!==null,e=e!==null&&e.memoizedState!==null,n&&(r=t.child,a=null,r.alternate!==null&&r.alternate.memoizedState!==null&&r.alternate.memoizedState.cachePool!==null&&(a=r.alternate.memoizedState.cachePool.pool),o=null,r.memoizedState!==null&&r.memoizedState.cachePool!==null&&(o=r.memoizedState.cachePool.pool),o!==a&&(r.flags|=2048)),n!==e&&n&&(t.child.flags|=8192),jc(t,t.updateQueue),Nc(t),null);case 4:return ae(),e===null&&Cd(t.stateNode.containerInfo),Nc(t),null;case 10:return Ui(t.type),Nc(t),null;case 19:if(ee(ro),r=t.memoizedState,r===null)return Nc(t),null;if(a=(t.flags&128)!=0,o=r.rendering,o===null)if(a)Mc(r,!1);else{if(Gl!==0||e!==null&&e.flags&128)for(e=t.child;e!==null;){if(o=io(e),o!==null){for(t.flags|=128,Mc(r,!1),e=o.updateQueue,t.updateQueue=e,jc(t,e),t.subtreeFlags=0,e=n,n=t.child;n!==null;)ii(n,e),n=n.sibling;return H(ro,ro.current&1|2),Oi&&xi(t,r.treeForkCount),t.child}e=e.sibling}r.tail!==null&&ye()>nu&&(t.flags|=128,a=!0,Mc(r,!1),t.lanes=4194304)}else{if(!a)if(e=io(o),e!==null){if(t.flags|=128,a=!0,e=e.updateQueue,t.updateQueue=e,jc(t,e),Mc(r,!0),r.tail===null&&r.tailMode===`hidden`&&!o.alternate&&!Oi)return Nc(t),null}else 2*ye()-r.renderingStartTime>nu&&n!==536870912&&(t.flags|=128,a=!0,Mc(r,!1),t.lanes=4194304);r.isBackwards?(o.sibling=t.child,t.child=o):(e=r.last,e===null?t.child=o:e.sibling=o,r.last=o)}return r.tail===null?(Nc(t),null):(e=r.tail,r.rendering=e,r.tail=e.sibling,r.renderingStartTime=ye(),e.sibling=null,n=ro.current,H(ro,a?n&1|2:n&1),Oi&&xi(t,r.treeForkCount),e);case 22:case 23:return no(t),Xa(),r=t.memoizedState!==null,e===null?r&&(t.flags|=8192):e.memoizedState!==null!==r&&(t.flags|=8192),r?n&536870912&&!(t.flags&128)&&(Nc(t),t.subtreeFlags&6&&(t.flags|=8192)):Nc(t),n=t.updateQueue,n!==null&&jc(t,n.retryQueue),n=null,e!==null&&e.memoizedState!==null&&e.memoizedState.cachePool!==null&&(n=e.memoizedState.cachePool.pool),r=null,t.memoizedState!==null&&t.memoizedState.cachePool!==null&&(r=t.memoizedState.cachePool.pool),r!==n&&(t.flags|=2048),e!==null&&ee(fa),null;case 24:return n=null,e!==null&&(n=e.memoizedState.cache),t.memoizedState.cache!==n&&(t.flags|=2048),Ui(ta),Nc(t),null;case 25:return null;case 30:return null}throw Error(i(156,t.tag))}function Fc(e,t){switch(wi(t),t.tag){case 1:return e=t.flags,e&65536?(t.flags=e&-65537|128,t):null;case 3:return Ui(ta),ae(),e=t.flags,e&65536&&!(e&128)?(t.flags=e&-65537|128,t):null;case 26:case 27:case 5:return oe(t),null;case 31:if(t.memoizedState!==null){if(no(t),t.alternate===null)throw Error(i(340));Ii()}return e=t.flags,e&65536?(t.flags=e&-65537|128,t):null;case 13:if(no(t),e=t.memoizedState,e!==null&&e.dehydrated!==null){if(t.alternate===null)throw Error(i(340));Ii()}return e=t.flags,e&65536?(t.flags=e&-65537|128,t):null;case 19:return ee(ro),null;case 4:return ae(),null;case 10:return Ui(t.type),null;case 22:case 23:return no(t),Xa(),e!==null&&ee(fa),e=t.flags,e&65536?(t.flags=e&-65537|128,t):null;case 24:return Ui(ta),null;case 25:return null;default:return null}}function Ic(e,t){switch(wi(t),t.tag){case 3:Ui(ta),ae();break;case 26:case 27:case 5:oe(t);break;case 4:ae();break;case 31:t.memoizedState!==null&&no(t);break;case 13:no(t);break;case 19:ee(ro);break;case 10:Ui(t.type);break;case 22:case 23:no(t),Xa(),e!==null&&ee(fa);break;case 24:Ui(ta)}}function Lc(e,t){try{var n=t.updateQueue,r=n===null?null:n.lastEffect;if(r!==null){var i=r.next;n=i;do{if((n.tag&e)===e){r=void 0;var a=n.create,o=n.inst;r=a(),o.destroy=r}n=n.next}while(n!==i)}}catch(e){Ku(t,t.return,e)}}function Rc(e,t,n){try{var r=t.updateQueue,i=r===null?null:r.lastEffect;if(i!==null){var a=i.next;r=a;do{if((r.tag&e)===e){var o=r.inst,s=o.destroy;if(s!==void 0){o.destroy=void 0,i=t;var c=n,l=s;try{l()}catch(e){Ku(i,c,e)}}}r=r.next}while(r!==a)}}catch(e){Ku(t,t.return,e)}}function zc(e){var t=e.updateQueue;if(t!==null){var n=e.stateNode;try{Ga(t,n)}catch(t){Ku(e,e.return,t)}}}function Bc(e,t,n){n.props=Vs(e.type,e.memoizedProps),n.state=e.memoizedState;try{n.componentWillUnmount()}catch(n){Ku(e,t,n)}}function Vc(e,t){try{var n=e.ref;if(n!==null){switch(e.tag){case 26:case 27:case 5:var r=e.stateNode;break;case 30:r=e.stateNode;break;default:r=e.stateNode}typeof n==`function`?e.refCleanup=n(r):n.current=r}}catch(n){Ku(e,t,n)}}function Hc(e,t){var n=e.ref,r=e.refCleanup;if(n!==null)if(typeof r==`function`)try{r()}catch(n){Ku(e,t,n)}finally{e.refCleanup=null,e=e.alternate,e!=null&&(e.refCleanup=null)}else if(typeof n==`function`)try{n(null)}catch(n){Ku(e,t,n)}else n.current=null}function Uc(e){var t=e.type,n=e.memoizedProps,r=e.stateNode;try{a:switch(t){case`button`:case`input`:case`select`:case`textarea`:n.autoFocus&&r.focus();break a;case`img`:n.src?r.src=n.src:n.srcSet&&(r.srcset=n.srcSet)}}catch(t){Ku(e,e.return,t)}}function Wc(e,t,n){try{var r=e.stateNode;Id(r,e.type,n,t),r[tt]=t}catch(t){Ku(e,e.return,t)}}function X(e){return e.tag===5||e.tag===3||e.tag===26||e.tag===27&&Qd(e.type)||e.tag===4}function Gc(e){a:for(;;){for(;e.sibling===null;){if(e.return===null||X(e.return))return null;e=e.return}for(e.sibling.return=e.return,e=e.sibling;e.tag!==5&&e.tag!==6&&e.tag!==18;){if(e.tag===27&&Qd(e.type)||e.flags&2||e.child===null||e.tag===4)continue a;e.child.return=e,e=e.child}if(!(e.flags&2))return e.stateNode}}function Kc(e,t,n){var r=e.tag;if(r===5||r===6)e=e.stateNode,t?(n.nodeType===9?n.body:n.nodeName===`HTML`?n.ownerDocument.body:n).insertBefore(e,t):(t=n.nodeType===9?n.body:n.nodeName===`HTML`?n.ownerDocument.body:n,t.appendChild(e),n=n._reactRootContainer,n!=null||t.onclick!==null||(t.onclick=Kt));else if(r!==4&&(r===27&&Qd(e.type)&&(n=e.stateNode,t=null),e=e.child,e!==null))for(Kc(e,t,n),e=e.sibling;e!==null;)Kc(e,t,n),e=e.sibling}function qc(e,t,n){var r=e.tag;if(r===5||r===6)e=e.stateNode,t?n.insertBefore(e,t):n.appendChild(e);else if(r!==4&&(r===27&&Qd(e.type)&&(n=e.stateNode),e=e.child,e!==null))for(qc(e,t,n),e=e.sibling;e!==null;)qc(e,t,n),e=e.sibling}function Jc(e){var t=e.stateNode,n=e.memoizedProps;try{for(var r=e.type,i=t.attributes;i.length;)t.removeAttributeNode(i[0]);Fd(t,r,n),t[et]=e,t[tt]=n}catch(t){Ku(e,e.return,t)}}var Yc=!1,Xc=!1,Zc=!1,Qc=typeof WeakSet==`function`?WeakSet:Set,$c=null;function el(e,t){if(e=e.containerInfo,zd=cp,e=br(e),xr(e)){if(`selectionStart`in e)var n={start:e.selectionStart,end:e.selectionEnd};else a:{n=(n=e.ownerDocument)&&n.defaultView||window;var r=n.getSelection&&n.getSelection();if(r&&r.rangeCount!==0){n=r.anchorNode;var a=r.anchorOffset,o=r.focusNode;r=r.focusOffset;try{n.nodeType,o.nodeType}catch{n=null;break a}var s=0,c=-1,l=-1,u=0,d=0,f=e,p=null;b:for(;;){for(var m;f!==n||a!==0&&f.nodeType!==3||(c=s+a),f!==o||r!==0&&f.nodeType!==3||(l=s+r),f.nodeType===3&&(s+=f.nodeValue.length),(m=f.firstChild)!==null;)p=f,f=m;for(;;){if(f===e)break b;if(p===n&&++u===a&&(c=s),p===o&&++d===r&&(l=s),(m=f.nextSibling)!==null)break;f=p,p=f.parentNode}f=m}n=c===-1||l===-1?null:{start:c,end:l}}else n=null}n||={start:0,end:0}}else n=null;for(Bd={focusedElem:e,selectionRange:n},cp=!1,$c=t;$c!==null;)if(t=$c,e=t.child,t.subtreeFlags&1028&&e!==null)e.return=t,$c=e;else for(;$c!==null;){switch(t=$c,o=t.alternate,e=t.flags,t.tag){case 0:if(e&4&&(e=t.updateQueue,e=e===null?null:e.events,e!==null))for(n=0;n title`))),Fd(o,r,n),o[et]=e,pt(o),r=o;break a;case`link`:var s=Hf(`link`,`href`,a).get(r+(n.href||``));if(s){for(var c=0;cg&&(o=g,g=h,h=o);var _=vr(s,h),v=vr(s,g);if(_&&v&&(p.rangeCount!==1||p.anchorNode!==_.node||p.anchorOffset!==_.offset||p.focusNode!==v.node||p.focusOffset!==v.offset)){var y=d.createRange();y.setStart(_.node,_.offset),p.removeAllRanges(),h>g?(p.addRange(y),p.extend(v.node,v.offset)):(y.setEnd(v.node,v.offset),p.addRange(y))}}}}for(d=[],p=s;p=p.parentNode;)p.nodeType===1&&d.push({element:p,left:p.scrollLeft,top:p.scrollTop});for(typeof s.focus==`function`&&s.focus(),s=0;sn?32:n,I.T=null,n=uu,uu=null;var o=ou,s=cu;if(au=0,su=ou=null,cu=0,Fl&6)throw Error(i(331));var c=Fl;if(Fl|=4,Al(o.current),Sl(o,o.current,s,n),Fl=c,id(0,!1),ke&&typeof ke.onPostCommitFiberRoot==`function`)try{ke.onPostCommitFiberRoot(Oe,o)}catch{}return!0}finally{L.p=a,I.T=r,Hu(e,t)}}function Gu(e,t,n){t=di(n,t),t=qs(e.stateNode,t,2),e=Ra(e,t,2),e!==null&&(We(e,2),rd(e))}function Ku(e,t,n){if(e.tag===3)Gu(e,e,n);else for(;t!==null;){if(t.tag===3){Gu(t,e,n);break}else if(t.tag===1){var r=t.stateNode;if(typeof t.type.getDerivedStateFromError==`function`||typeof r.componentDidCatch==`function`&&(iu===null||!iu.has(r))){e=di(n,e),n=Js(2),r=Ra(t,n,2),r!==null&&(Ys(n,r,t,e),We(r,2),rd(r));break}}t=t.return}}function qu(e,t,n){var r=e.pingCache;if(r===null){r=e.pingCache=new Pl;var i=new Set;r.set(t,i)}else i=r.get(t),i===void 0&&(i=new Set,r.set(t,i));i.has(n)||(Ul=!0,i.add(n),e=Ju.bind(null,e,t,n),t.then(e,e))}function Ju(e,t,n){var r=e.pingCache;r!==null&&r.delete(t),e.pingedLanes|=e.suspendedLanes&n,e.warmLanes&=~n,Il===e&&(Rl&n)===n&&(Gl===4||Gl===3&&(Rl&62914560)===Rl&&300>ye()-eu?!(Fl&2)&&Cu(e,0):Jl|=n,Xl===Rl&&(Xl=0)),rd(e)}function Yu(e,t){t===0&&(t=He()),e=Xr(e,t),e!==null&&(We(e,t),rd(e))}function Xu(e){var t=e.memoizedState,n=0;t!==null&&(n=t.retryLane),Yu(e,n)}function Zu(e,t){var n=0;switch(e.tag){case 31:case 13:var r=e.stateNode,a=e.memoizedState;a!==null&&(n=a.retryLane);break;case 19:r=e.stateNode;break;case 22:r=e.stateNode._retryCache;break;default:throw Error(i(314))}r!==null&&r.delete(t),Yu(e,n)}function Qu(e,t){return he(e,t)}var Z=null,$u=null,Q=!1,ed=!1,td=!1,nd=0;function rd(e){e!==$u&&e.next===null&&($u===null?Z=$u=e:$u=$u.next=e),ed=!0,Q||(Q=!0,ud())}function id(e,t){if(!td&&ed){td=!0;do for(var n=!1,r=Z;r!==null;){if(!t)if(e!==0){var i=r.pendingLanes;if(i===0)var a=0;else{var o=r.suspendedLanes,s=r.pingedLanes;a=(1<<31-je(42|e)+1)-1,a&=i&~(o&~s),a=a&201326741?a&201326741|1:a?a|2:0}a!==0&&(n=!0,ld(r,a))}else a=Rl,a=ze(r,r===Il?a:0,r.cancelPendingCommit!==null||r.timeoutHandle!==-1),!(a&3)||Be(r,a)||(n=!0,ld(r,a));r=r.next}while(n);td=!1}}function ad(){od()}function od(){ed=Q=!1;var e=0;nd!==0&&Kd()&&(e=nd);for(var t=ye(),n=null,r=Z;r!==null;){var i=r.next,a=sd(r,t);a===0?(r.next=null,n===null?Z=i:n.next=i,i===null&&($u=n)):(n=r,(e!==0||a&3)&&(ed=!0)),r=i}au!==0&&au!==5||id(e,!1),nd!==0&&(nd=0)}function sd(e,t){for(var n=e.suspendedLanes,r=e.pingedLanes,i=e.expirationTimes,a=e.pendingLanes&-62914561;0s)break;var u=c.transferSize,d=c.initiatorType;u&&Ld(d)&&(c=c.responseEnd,o+=u*(c`u`?null:document;function Sf(e,t,n){var r=xf;if(r&&typeof t==`string`&&t){var i=Mt(t);i=`link[rel="`+e+`"][href="`+i+`"]`,typeof n==`string`&&(i+=`[crossorigin="`+n+`"]`),gf.has(i)||(gf.add(i),e={rel:e,crossOrigin:n,href:t},r.querySelector(i)===null&&(t=r.createElement(`link`),Fd(t,`link`,e),pt(t),r.head.appendChild(t)))}}function Cf(e){vf.D(e),Sf(`dns-prefetch`,e,null)}function wf(e,t){vf.C(e,t),Sf(`preconnect`,e,t)}function Tf(e,t,n){vf.L(e,t,n);var r=xf;if(r&&e&&t){var i=`link[rel="preload"][as="`+Mt(t)+`"]`;t===`image`&&n&&n.imageSrcSet?(i+=`[imagesrcset="`+Mt(n.imageSrcSet)+`"]`,typeof n.imageSizes==`string`&&(i+=`[imagesizes="`+Mt(n.imageSizes)+`"]`)):i+=`[href="`+Mt(e)+`"]`;var a=i;switch(t){case`style`:a=jf(e);break;case`script`:a=Ff(e)}hf.has(a)||(e=p({rel:`preload`,href:t===`image`&&n&&n.imageSrcSet?void 0:e,as:t},n),hf.set(a,e),r.querySelector(i)!==null||t===`style`&&r.querySelector(Mf(a))||t===`script`&&r.querySelector(If(a))||(t=r.createElement(`link`),Fd(t,`link`,e),pt(t),r.head.appendChild(t)))}}function Ef(e,t){vf.m(e,t);var n=xf;if(n&&e){var r=t&&typeof t.as==`string`?t.as:`script`,i=`link[rel="modulepreload"][as="`+Mt(r)+`"][href="`+Mt(e)+`"]`,a=i;switch(r){case`audioworklet`:case`paintworklet`:case`serviceworker`:case`sharedworker`:case`worker`:case`script`:a=Ff(e)}if(!hf.has(a)&&(e=p({rel:`modulepreload`,href:e},t),hf.set(a,e),n.querySelector(i)===null)){switch(r){case`audioworklet`:case`paintworklet`:case`serviceworker`:case`sharedworker`:case`worker`:case`script`:if(n.querySelector(If(a)))return}r=n.createElement(`link`),Fd(r,`link`,e),pt(r),n.head.appendChild(r)}}}function Df(e,t,n){vf.S(e,t,n);var r=xf;if(r&&e){var i=ft(r).hoistableStyles,a=jf(e);t||=`default`;var o=i.get(a);if(!o){var s={loading:0,preload:null};if(o=r.querySelector(Mf(a)))s.loading=5;else{e=p({rel:`stylesheet`,href:e,"data-precedence":t},n),(n=hf.get(a))&&zf(e,n);var c=o=r.createElement(`link`);pt(c),Fd(c,`link`,e),c._p=new Promise(function(e,t){c.onload=e,c.onerror=t}),c.addEventListener(`load`,function(){s.loading|=1}),c.addEventListener(`error`,function(){s.loading|=2}),s.loading|=4,Rf(o,t,r)}o={type:`stylesheet`,instance:o,count:1,state:s},i.set(a,o)}}}function Of(e,t){vf.X(e,t);var n=xf;if(n&&e){var r=ft(n).hoistableScripts,i=Ff(e),a=r.get(i);a||(a=n.querySelector(If(i)),a||(e=p({src:e,async:!0},t),(t=hf.get(i))&&Bf(e,t),a=n.createElement(`script`),pt(a),Fd(a,`link`,e),n.head.appendChild(a)),a={type:`script`,instance:a,count:1,state:null},r.set(i,a))}}function kf(e,t){vf.M(e,t);var n=xf;if(n&&e){var r=ft(n).hoistableScripts,i=Ff(e),a=r.get(i);a||(a=n.querySelector(If(i)),a||(e=p({src:e,async:!0,type:`module`},t),(t=hf.get(i))&&Bf(e,t),a=n.createElement(`script`),pt(a),Fd(a,`link`,e),n.head.appendChild(a)),a={type:`script`,instance:a,count:1,state:null},r.set(i,a))}}function Af(e,t,n,r){var a=(a=re.current)?_f(a):null;if(!a)throw Error(i(446));switch(e){case`meta`:case`title`:return null;case`style`:return typeof n.precedence==`string`&&typeof n.href==`string`?(t=jf(n.href),n=ft(a).hoistableStyles,r=n.get(t),r||(r={type:`style`,instance:null,count:0,state:null},n.set(t,r)),r):{type:`void`,instance:null,count:0,state:null};case`link`:if(n.rel===`stylesheet`&&typeof n.href==`string`&&typeof n.precedence==`string`){e=jf(n.href);var o=ft(a).hoistableStyles,s=o.get(e);if(s||(a=a.ownerDocument||a,s={type:`stylesheet`,instance:null,count:0,state:{loading:0,preload:null}},o.set(e,s),(o=a.querySelector(Mf(e)))&&!o._p&&(s.instance=o,s.state.loading=5),hf.has(e)||(n={rel:`preload`,as:`style`,href:n.href,crossOrigin:n.crossOrigin,integrity:n.integrity,media:n.media,hrefLang:n.hrefLang,referrerPolicy:n.referrerPolicy},hf.set(e,n),o||Pf(a,e,n,s.state))),t&&r===null)throw Error(i(528,``));return s}if(t&&r!==null)throw Error(i(529,``));return null;case`script`:return t=n.async,n=n.src,typeof n==`string`&&t&&typeof t!=`function`&&typeof t!=`symbol`?(t=Ff(n),n=ft(a).hoistableScripts,r=n.get(t),r||(r={type:`script`,instance:null,count:0,state:null},n.set(t,r)),r):{type:`void`,instance:null,count:0,state:null};default:throw Error(i(444,e))}}function jf(e){return`href="`+Mt(e)+`"`}function Mf(e){return`link[rel="stylesheet"][`+e+`]`}function Nf(e){return p({},e,{"data-precedence":e.precedence,precedence:null})}function Pf(e,t,n,r){e.querySelector(`link[rel="preload"][as="style"][`+t+`]`)?r.loading=1:(t=e.createElement(`link`),r.preload=t,t.addEventListener(`load`,function(){return r.loading|=1}),t.addEventListener(`error`,function(){return r.loading|=2}),Fd(t,`link`,n),pt(t),e.head.appendChild(t))}function Ff(e){return`[src="`+Mt(e)+`"]`}function If(e){return`script[async]`+e}function Lf(e,t,n){if(t.count++,t.instance===null)switch(t.type){case`style`:var r=e.querySelector(`style[data-href~="`+Mt(n.href)+`"]`);if(r)return t.instance=r,pt(r),r;var a=p({},n,{"data-href":n.href,"data-precedence":n.precedence,href:null,precedence:null});return r=(e.ownerDocument||e).createElement(`style`),pt(r),Fd(r,`style`,a),Rf(r,n.precedence,e),t.instance=r;case`stylesheet`:a=jf(n.href);var o=e.querySelector(Mf(a));if(o)return t.state.loading|=4,t.instance=o,pt(o),o;r=Nf(n),(a=hf.get(a))&&zf(r,a),o=(e.ownerDocument||e).createElement(`link`),pt(o);var s=o;return s._p=new Promise(function(e,t){s.onload=e,s.onerror=t}),Fd(o,`link`,r),t.state.loading|=4,Rf(o,n.precedence,e),t.instance=o;case`script`:return o=Ff(n.src),(a=e.querySelector(If(o)))?(t.instance=a,pt(a),a):(r=n,(a=hf.get(o))&&(r=p({},n),Bf(r,a)),e=e.ownerDocument||e,a=e.createElement(`script`),pt(a),Fd(a,`link`,r),e.head.appendChild(a),t.instance=a);case`void`:return null;default:throw Error(i(443,t.type))}else t.type===`stylesheet`&&!(t.state.loading&4)&&(r=t.instance,t.state.loading|=4,Rf(r,n.precedence,e));return t.instance}function Rf(e,t,n){for(var r=n.querySelectorAll(`link[rel="stylesheet"][data-precedence],style[data-precedence]`),i=r.length?r[r.length-1]:null,a=i,o=0;o title`):null)}function Wf(e,t,n){if(n===1||t.itemProp!=null)return!1;switch(e){case`meta`:case`title`:return!0;case`style`:if(typeof t.precedence!=`string`||typeof t.href!=`string`||t.href===``)break;return!0;case`link`:if(typeof t.rel!=`string`||typeof t.href!=`string`||t.href===``||t.onLoad||t.onError)break;switch(t.rel){case`stylesheet`:return e=t.disabled,typeof t.precedence==`string`&&e==null;default:return!0}case`script`:if(t.async&&typeof t.async!=`function`&&typeof t.async!=`symbol`&&!t.onLoad&&!t.onError&&t.src&&typeof t.src==`string`)return!0}return!1}function Gf(e){return!(e.type===`stylesheet`&&!(e.state.loading&3))}function Kf(e,t,n,r){if(n.type===`stylesheet`&&(typeof r.media!=`string`||!1!==matchMedia(r.media).matches)&&!(n.state.loading&4)){if(n.instance===null){var i=jf(r.href),a=t.querySelector(Mf(i));if(a){t=a._p,typeof t==`object`&&t&&typeof t.then==`function`&&(e.count++,e=Yf.bind(e),t.then(e,e)),n.state.loading|=4,n.instance=a,pt(a);return}a=t.ownerDocument||t,r=Nf(r),(i=hf.get(i))&&zf(r,i),a=a.createElement(`link`),pt(a);var o=a;o._p=new Promise(function(e,t){o.onload=e,o.onerror=t}),Fd(a,`link`,r),n.instance=a}e.stylesheets===null&&(e.stylesheets=new Map),e.stylesheets.set(n,t),(t=n.state.preload)&&!(n.state.loading&3)&&(e.count++,n=Yf.bind(e),t.addEventListener(`load`,n),t.addEventListener(`error`,n))}}var qf=0;function Jf(e,t){return e.stylesheets&&e.count===0&&Zf(e,e.stylesheets),0qf?50:800)+t);return e.unsuspend=n,function(){e.unsuspend=null,clearTimeout(r),clearTimeout(i)}}:null}function Yf(){if(this.count--,this.count===0&&(this.imgCount===0||!this.waitingForImages)){if(this.stylesheets)Zf(this,this.stylesheets);else if(this.unsuspend){var e=this.unsuspend;this.unsuspend=null,e()}}}var Xf=null;function Zf(e,t){e.stylesheets=null,e.unsuspend!==null&&(e.count++,Xf=new Map,t.forEach(Qf,e),Xf=null,Yf.call(e))}function Qf(e,t){if(!(t.state.loading&4)){var n=Xf.get(e);if(n)var r=n.get(null);else{n=new Map,Xf.set(e,n);for(var i=e.querySelectorAll(`link[data-precedence],style[data-precedence]`),a=0;a{function n(){if(!(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__>`u`||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!=`function`))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(n)}catch(e){console.error(e)}}n(),t.exports=_()})),y=l(f()),b=v(),x=e=>typeof e==`string`,S=()=>{let e,t,n=new Promise((n,r)=>{e=n,t=r});return n.resolve=e,n.reject=t,n},C=e=>e==null?``:``+e,w=(e,t,n)=>{e.forEach(e=>{t[e]&&(n[e]=t[e])})},T=/###/g,E=e=>e&&e.indexOf(`###`)>-1?e.replace(T,`.`):e,D=e=>!e||x(e),O=(e,t,n)=>{let r=x(t)?t.split(`.`):t,i=0;for(;i{let{obj:r,k:i}=O(e,t,Object);if(r!==void 0||t.length===1){r[i]=n;return}let a=t[t.length-1],o=t.slice(0,t.length-1),s=O(e,o,Object);for(;s.obj===void 0&&o.length;)a=`${o[o.length-1]}.${a}`,o=o.slice(0,o.length-1),s=O(e,o,Object),s?.obj&&s.obj[`${s.k}.${a}`]!==void 0&&(s.obj=void 0);s.obj[`${s.k}.${a}`]=n},A=(e,t,n,r)=>{let{obj:i,k:a}=O(e,t,Object);i[a]=i[a]||[],i[a].push(n)},j=(e,t)=>{let{obj:n,k:r}=O(e,t);if(n&&Object.prototype.hasOwnProperty.call(n,r))return n[r]},M=(e,t,n)=>{let r=j(e,n);return r===void 0?j(t,n):r},N=(e,t,n)=>{for(let r in t)r!==`__proto__`&&r!==`constructor`&&(r in e?x(e[r])||e[r]instanceof String||x(t[r])||t[r]instanceof String?n&&(e[r]=t[r]):N(e[r],t[r],n):e[r]=t[r]);return e},P=e=>e.replace(/[\-\[\]\/\{\}\(\)\*\+\?\.\\\^\$\|]/g,`\\$&`),F={"&":`&`,"<":`<`,">":`>`,'"':`"`,"'":`'`,"/":`/`},I=e=>x(e)?e.replace(/[&<>"'\/]/g,e=>F[e]):e,L=class{constructor(e){this.capacity=e,this.regExpMap=new Map,this.regExpQueue=[]}getRegExp(e){let t=this.regExpMap.get(e);if(t!==void 0)return t;let n=new RegExp(e);return this.regExpQueue.length===this.capacity&&this.regExpMap.delete(this.regExpQueue.shift()),this.regExpMap.set(e,n),this.regExpQueue.push(e),n}},R=[` `,`,`,`?`,`!`,`;`],z=new L(20),B=(e,t,n)=>{t||=``,n||=``;let r=R.filter(e=>t.indexOf(e)<0&&n.indexOf(e)<0);if(r.length===0)return!0;let i=z.getRegExp(`(${r.map(e=>e===`?`?`\\?`:e).join(`|`)})`),a=!i.test(e);if(!a){let t=e.indexOf(n);t>0&&!i.test(e.substring(0,t))&&(a=!0)}return a},V=(e,t,n=`.`)=>{if(!e)return;if(e[t])return Object.prototype.hasOwnProperty.call(e,t)?e[t]:void 0;let r=t.split(n),i=e;for(let e=0;e-1&&oe?.replace(`_`,`-`),H={type:`logger`,log(e){this.output(`log`,e)},warn(e){this.output(`warn`,e)},error(e){this.output(`error`,e)},output(e,t){console?.[e]?.apply?.(console,t)}},te=new class e{constructor(e,t={}){this.init(e,t)}init(e,t={}){this.prefix=t.prefix||`i18next:`,this.logger=e||H,this.options=t,this.debug=t.debug}log(...e){return this.forward(e,`log`,``,!0)}warn(...e){return this.forward(e,`warn`,``,!0)}error(...e){return this.forward(e,`error`,``)}deprecate(...e){return this.forward(e,`warn`,`WARNING DEPRECATED: `,!0)}forward(e,t,n,r){return r&&!this.debug?null:(x(e[0])&&(e[0]=`${n}${this.prefix} ${e[0]}`),this.logger[t](e))}create(t){return new e(this.logger,{prefix:`${this.prefix}:${t}:`,...this.options})}clone(t){return t||=this.options,t.prefix=t.prefix||this.prefix,new e(this.logger,t)}},ne=class{constructor(){this.observers={}}on(e,t){return e.split(` `).forEach(e=>{this.observers[e]||(this.observers[e]=new Map);let n=this.observers[e].get(t)||0;this.observers[e].set(t,n+1)}),this}off(e,t){if(this.observers[e]){if(!t){delete this.observers[e];return}this.observers[e].delete(t)}}emit(e,...t){this.observers[e]&&Array.from(this.observers[e].entries()).forEach(([e,n])=>{for(let r=0;r{for(let i=0;i-1&&this.options.ns.splice(t,1)}getResource(e,t,n,r={}){let i=r.keySeparator===void 0?this.options.keySeparator:r.keySeparator,a=r.ignoreJSONStructure===void 0?this.options.ignoreJSONStructure:r.ignoreJSONStructure,o;e.indexOf(`.`)>-1?o=e.split(`.`):(o=[e,t],n&&(Array.isArray(n)?o.push(...n):x(n)&&i?o.push(...n.split(i)):o.push(n)));let s=j(this.data,o);return!s&&!t&&!n&&e.indexOf(`.`)>-1&&(e=o[0],t=o[1],n=o.slice(2).join(`.`)),s||!a||!x(n)?s:V(this.data?.[e]?.[t],n,i)}addResource(e,t,n,r,i={silent:!1}){let a=i.keySeparator===void 0?this.options.keySeparator:i.keySeparator,o=[e,t];n&&(o=o.concat(a?n.split(a):n)),e.indexOf(`.`)>-1&&(o=e.split(`.`),r=t,t=o[1]),this.addNamespaces(t),k(this.data,o,r),i.silent||this.emit(`added`,e,t,n,r)}addResources(e,t,n,r={silent:!1}){for(let r in n)(x(n[r])||Array.isArray(n[r]))&&this.addResource(e,t,r,n[r],{silent:!0});r.silent||this.emit(`added`,e,t,n)}addResourceBundle(e,t,n,r,i,a={silent:!1,skipCopy:!1}){let o=[e,t];e.indexOf(`.`)>-1&&(o=e.split(`.`),r=n,n=t,t=o[1]),this.addNamespaces(t);let s=j(this.data,o)||{};a.skipCopy||(n=JSON.parse(JSON.stringify(n))),r?N(s,n,i):s={...s,...n},k(this.data,o,s),a.silent||this.emit(`added`,e,t,n)}removeResourceBundle(e,t){this.hasResourceBundle(e,t)&&delete this.data[e][t],this.removeNamespaces(t),this.emit(`removed`,e,t)}hasResourceBundle(e,t){return this.getResource(e,t)!==void 0}getResourceBundle(e,t){return t||=this.options.defaultNS,this.getResource(e,t)}getDataByLanguage(e){return this.data[e]}hasLanguageSomeTranslations(e){let t=this.getDataByLanguage(e);return!!(t&&Object.keys(t)||[]).find(e=>t[e]&&Object.keys(t[e]).length>0)}toJSON(){return this.data}},U={processors:{},addPostProcessor(e){this.processors[e.name]=e},handle(e,t,n,r,i){return e.forEach(e=>{t=this.processors[e]?.process(t,n,r,i)??t}),t}},ie=Symbol(`i18next/PATH_KEY`);function ae(){let e=[],t=Object.create(null),n;return t.get=(r,i)=>(n?.revoke?.(),i===ie?e:(e.push(i),n=Proxy.revocable(r,t),n.proxy)),Proxy.revocable(Object.create(null),t).proxy}function W(e,t){let{[ie]:n}=e(ae());return n.join(t?.keySeparator??`.`)}var oe={},se=e=>!x(e)&&typeof e!=`boolean`&&typeof e!=`number`,ce=class e extends ne{constructor(e,t={}){super(),w([`resourceStore`,`languageUtils`,`pluralResolver`,`interpolator`,`backendConnector`,`i18nFormat`,`utils`],e,this),this.options=t,this.options.keySeparator===void 0&&(this.options.keySeparator=`.`),this.logger=te.create(`translator`)}changeLanguage(e){e&&(this.language=e)}exists(e,t={interpolation:{}}){let n={...t};if(e==null)return!1;let r=this.resolve(e,n);if(r?.res===void 0)return!1;let i=se(r.res);return!(n.returnObjects===!1&&i)}extractFromKey(e,t){let n=t.nsSeparator===void 0?this.options.nsSeparator:t.nsSeparator;n===void 0&&(n=`:`);let r=t.keySeparator===void 0?this.options.keySeparator:t.keySeparator,i=t.ns||this.options.defaultNS||[],a=n&&e.indexOf(n)>-1,o=!this.options.userDefinedKeySeparator&&!t.keySeparator&&!this.options.userDefinedNsSeparator&&!t.nsSeparator&&!B(e,n,r);if(a&&!o){let t=e.match(this.interpolator.nestingRegexp);if(t&&t.length>0)return{key:e,namespaces:x(i)?[i]:i};let a=e.split(n);(n!==r||n===r&&this.options.ns.indexOf(a[0])>-1)&&(i=a.shift()),e=a.join(r)}return{key:e,namespaces:x(i)?[i]:i}}translate(t,n,r){let i=typeof n==`object`?{...n}:n;if(typeof i!=`object`&&this.options.overloadTranslationOptionHandler&&(i=this.options.overloadTranslationOptionHandler(arguments)),typeof i==`object`&&(i={...i}),i||={},t==null)return``;typeof t==`function`&&(t=W(t,{...this.options,...i})),Array.isArray(t)||(t=[String(t)]);let a=i.returnDetails===void 0?this.options.returnDetails:i.returnDetails,o=i.keySeparator===void 0?this.options.keySeparator:i.keySeparator,{key:s,namespaces:c}=this.extractFromKey(t[t.length-1],i),l=c[c.length-1],u=i.nsSeparator===void 0?this.options.nsSeparator:i.nsSeparator;u===void 0&&(u=`:`);let d=i.lng||this.language,f=i.appendNamespaceToCIMode||this.options.appendNamespaceToCIMode;if(d?.toLowerCase()===`cimode`)return f?a?{res:`${l}${u}${s}`,usedKey:s,exactUsedKey:s,usedLng:d,usedNS:l,usedParams:this.getUsedParamsDetails(i)}:`${l}${u}${s}`:a?{res:s,usedKey:s,exactUsedKey:s,usedLng:d,usedNS:l,usedParams:this.getUsedParamsDetails(i)}:s;let p=this.resolve(t,i),m=p?.res,h=p?.usedKey||s,g=p?.exactUsedKey||s,_=[`[object Number]`,`[object Function]`,`[object RegExp]`],v=i.joinArrays===void 0?this.options.joinArrays:i.joinArrays,y=!this.i18nFormat||this.i18nFormat.handleAsObject,b=i.count!==void 0&&!x(i.count),S=e.hasDefaultValue(i),C=b?this.pluralResolver.getSuffix(d,i.count,i):``,w=i.ordinal&&b?this.pluralResolver.getSuffix(d,i.count,{ordinal:!1}):``,T=b&&!i.ordinal&&i.count===0,E=T&&i[`defaultValue${this.options.pluralSeparator}zero`]||i[`defaultValue${C}`]||i[`defaultValue${w}`]||i.defaultValue,D=m;y&&!m&&S&&(D=E);let O=se(D),k=Object.prototype.toString.apply(D);if(y&&D&&O&&_.indexOf(k)<0&&!(x(v)&&Array.isArray(D))){if(!i.returnObjects&&!this.options.returnObjects){this.options.returnedObjectHandler||this.logger.warn(`accessing an object - but returnObjects options is not enabled!`);let e=this.options.returnedObjectHandler?this.options.returnedObjectHandler(h,D,{...i,ns:c}):`key '${s} (${this.language})' returned an object instead of string.`;return a?(p.res=e,p.usedParams=this.getUsedParamsDetails(i),p):e}if(o){let e=Array.isArray(D),t=e?[]:{},n=e?g:h;for(let e in D)if(Object.prototype.hasOwnProperty.call(D,e)){let r=`${n}${o}${e}`;S&&!m?t[e]=this.translate(r,{...i,defaultValue:se(E)?E[e]:void 0,joinArrays:!1,ns:c}):t[e]=this.translate(r,{...i,joinArrays:!1,ns:c}),t[e]===r&&(t[e]=D[e])}m=t}}else if(y&&x(v)&&Array.isArray(m))m=m.join(v),m&&=this.extendTranslation(m,t,i,r);else{let e=!1,n=!1;!this.isValidLookup(m)&&S&&(e=!0,m=E),this.isValidLookup(m)||(n=!0,m=s);let a=(i.missingKeyNoValueFallbackToKey||this.options.missingKeyNoValueFallbackToKey)&&n?void 0:m,c=S&&E!==m&&this.options.updateMissing;if(n||e||c){if(this.logger.log(c?`updateKey`:`missingKey`,d,l,s,c?E:m),o){let e=this.resolve(s,{...i,keySeparator:!1});e&&e.res&&this.logger.warn(`Seems the loaded translations were in flat JSON format instead of nested. Either set keySeparator: false on init or make sure your translations are published in nested format.`)}let e=[],t=this.languageUtils.getFallbackCodes(this.options.fallbackLng,i.lng||this.language);if(this.options.saveMissingTo===`fallback`&&t&&t[0])for(let n=0;n{let r=S&&n!==m?n:a;this.options.missingKeyHandler?this.options.missingKeyHandler(e,l,t,r,c,i):this.backendConnector?.saveMissing&&this.backendConnector.saveMissing(e,l,t,r,c,i),this.emit(`missingKey`,e,l,t,m)};this.options.saveMissing&&(this.options.saveMissingPlurals&&b?e.forEach(e=>{let t=this.pluralResolver.getSuffixes(e,i);T&&i[`defaultValue${this.options.pluralSeparator}zero`]&&t.indexOf(`${this.options.pluralSeparator}zero`)<0&&t.push(`${this.options.pluralSeparator}zero`),t.forEach(t=>{n([e],s+t,i[`defaultValue${t}`]||E)})}):n(e,s,E))}m=this.extendTranslation(m,t,i,p,r),n&&m===s&&this.options.appendNamespaceToMissingKey&&(m=`${l}${u}${s}`),(n||e)&&this.options.parseMissingKeyHandler&&(m=this.options.parseMissingKeyHandler(this.options.appendNamespaceToMissingKey?`${l}${u}${s}`:s,e?m:void 0,i))}return a?(p.res=m,p.usedParams=this.getUsedParamsDetails(i),p):m}extendTranslation(e,t,n,r,i){if(this.i18nFormat?.parse)e=this.i18nFormat.parse(e,{...this.options.interpolation.defaultVariables,...n},n.lng||this.language||r.usedLng,r.usedNS,r.usedKey,{resolved:r});else if(!n.skipInterpolation){n.interpolation&&this.interpolator.init({...n,interpolation:{...this.options.interpolation,...n.interpolation}});let a=x(e)&&(n?.interpolation?.skipOnVariables===void 0?this.options.interpolation.skipOnVariables:n.interpolation.skipOnVariables),o;if(a){let t=e.match(this.interpolator.nestingRegexp);o=t&&t.length}let s=n.replace&&!x(n.replace)?n.replace:n;if(this.options.interpolation.defaultVariables&&(s={...this.options.interpolation.defaultVariables,...s}),e=this.interpolator.interpolate(e,s,n.lng||this.language||r.usedLng,n),a){let t=e.match(this.interpolator.nestingRegexp),r=t&&t.length;oi?.[0]===e[0]&&!n.context?(this.logger.warn(`It seems you are nesting recursively key: ${e[0]} in key: ${t[0]}`),null):this.translate(...e,t),n)),n.interpolation&&this.interpolator.reset()}let a=n.postProcess||this.options.postProcess,o=x(a)?[a]:a;return e!=null&&o?.length&&n.applyPostProcessor!==!1&&(e=U.handle(o,e,t,this.options&&this.options.postProcessPassResolved?{i18nResolved:{...r,usedParams:this.getUsedParamsDetails(n)},...n}:n,this)),e}resolve(e,t={}){let n,r,i,a,o;return x(e)&&(e=[e]),e.forEach(e=>{if(this.isValidLookup(n))return;let s=this.extractFromKey(e,t),c=s.key;r=c;let l=s.namespaces;this.options.fallbackNS&&(l=l.concat(this.options.fallbackNS));let u=t.count!==void 0&&!x(t.count),d=u&&!t.ordinal&&t.count===0,f=t.context!==void 0&&(x(t.context)||typeof t.context==`number`)&&t.context!==``,p=t.lngs?t.lngs:this.languageUtils.toResolveHierarchy(t.lng||this.language,t.fallbackLng);l.forEach(e=>{this.isValidLookup(n)||(o=e,!oe[`${p[0]}-${e}`]&&this.utils?.hasLoadedNamespace&&!this.utils?.hasLoadedNamespace(o)&&(oe[`${p[0]}-${e}`]=!0,this.logger.warn(`key "${r}" for languages "${p.join(`, `)}" won't get resolved as namespace "${o}" was not yet loaded`,`This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!`)),p.forEach(r=>{if(this.isValidLookup(n))return;a=r;let o=[c];if(this.i18nFormat?.addLookupKeys)this.i18nFormat.addLookupKeys(o,c,r,e,t);else{let e;u&&(e=this.pluralResolver.getSuffix(r,t.count,t));let n=`${this.options.pluralSeparator}zero`,i=`${this.options.pluralSeparator}ordinal${this.options.pluralSeparator}`;if(u&&(t.ordinal&&e.indexOf(i)===0&&o.push(c+e.replace(i,this.options.pluralSeparator)),o.push(c+e),d&&o.push(c+n)),f){let r=`${c}${this.options.contextSeparator||`_`}${t.context}`;o.push(r),u&&(t.ordinal&&e.indexOf(i)===0&&o.push(r+e.replace(i,this.options.pluralSeparator)),o.push(r+e),d&&o.push(r+n))}}let s;for(;s=o.pop();)this.isValidLookup(n)||(i=s,n=this.getResource(r,e,s,t))}))})}),{res:n,usedKey:r,exactUsedKey:i,usedLng:a,usedNS:o}}isValidLookup(e){return e!==void 0&&!(!this.options.returnNull&&e===null)&&!(!this.options.returnEmptyString&&e===``)}getResource(e,t,n,r={}){return this.i18nFormat?.getResource?this.i18nFormat.getResource(e,t,n,r):this.resourceStore.getResource(e,t,n,r)}getUsedParamsDetails(e={}){let t=[`defaultValue`,`ordinal`,`context`,`replace`,`lng`,`lngs`,`fallbackLng`,`ns`,`keySeparator`,`nsSeparator`,`returnObjects`,`returnDetails`,`joinArrays`,`postProcess`,`interpolation`],n=e.replace&&!x(e.replace),r=n?e.replace:e;if(n&&e.count!==void 0&&(r.count=e.count),this.options.interpolation.defaultVariables&&(r={...this.options.interpolation.defaultVariables,...r}),!n){r={...r};for(let e of t)delete r[e]}return r}static hasDefaultValue(e){for(let t in e)if(Object.prototype.hasOwnProperty.call(e,t)&&t.substring(0,12)===`defaultValue`&&e[t]!==void 0)return!0;return!1}},le=class{constructor(e){this.options=e,this.supportedLngs=this.options.supportedLngs||!1,this.logger=te.create(`languageUtils`)}getScriptPartFromCode(e){if(e=ee(e),!e||e.indexOf(`-`)<0)return null;let t=e.split(`-`);return t.length===2||(t.pop(),t[t.length-1].toLowerCase()===`x`)?null:this.formatLanguageCode(t.join(`-`))}getLanguagePartFromCode(e){if(e=ee(e),!e||e.indexOf(`-`)<0)return e;let t=e.split(`-`);return this.formatLanguageCode(t[0])}formatLanguageCode(e){if(x(e)&&e.indexOf(`-`)>-1){let t;try{t=Intl.getCanonicalLocales(e)[0]}catch{}return t&&this.options.lowerCaseLng&&(t=t.toLowerCase()),t||(this.options.lowerCaseLng?e.toLowerCase():e)}return this.options.cleanCode||this.options.lowerCaseLng?e.toLowerCase():e}isSupportedCode(e){return(this.options.load===`languageOnly`||this.options.nonExplicitSupportedLngs)&&(e=this.getLanguagePartFromCode(e)),!this.supportedLngs||!this.supportedLngs.length||this.supportedLngs.indexOf(e)>-1}getBestMatchFromCodes(e){if(!e)return null;let t;return e.forEach(e=>{if(t)return;let n=this.formatLanguageCode(e);(!this.options.supportedLngs||this.isSupportedCode(n))&&(t=n)}),!t&&this.options.supportedLngs&&e.forEach(e=>{if(t)return;let n=this.getScriptPartFromCode(e);if(this.isSupportedCode(n))return t=n;let r=this.getLanguagePartFromCode(e);if(this.isSupportedCode(r))return t=r;t=this.options.supportedLngs.find(e=>{if(e===r||!(e.indexOf(`-`)<0&&r.indexOf(`-`)<0)&&(e.indexOf(`-`)>0&&r.indexOf(`-`)<0&&e.substring(0,e.indexOf(`-`))===r||e.indexOf(r)===0&&r.length>1))return e})}),t||=this.getFallbackCodes(this.options.fallbackLng)[0],t}getFallbackCodes(e,t){if(!e)return[];if(typeof e==`function`&&(e=e(t)),x(e)&&(e=[e]),Array.isArray(e))return e;if(!t)return e.default||[];let n=e[t];return n||=e[this.getScriptPartFromCode(t)],n||=e[this.formatLanguageCode(t)],n||=e[this.getLanguagePartFromCode(t)],n||=e.default,n||[]}toResolveHierarchy(e,t){let n=this.getFallbackCodes((t===!1?[]:t)||this.options.fallbackLng||[],e),r=[],i=e=>{e&&(this.isSupportedCode(e)?r.push(e):this.logger.warn(`rejecting language code not found in supportedLngs: ${e}`))};return x(e)&&(e.indexOf(`-`)>-1||e.indexOf(`_`)>-1)?(this.options.load!==`languageOnly`&&i(this.formatLanguageCode(e)),this.options.load!==`languageOnly`&&this.options.load!==`currentOnly`&&i(this.getScriptPartFromCode(e)),this.options.load!==`currentOnly`&&i(this.getLanguagePartFromCode(e))):x(e)&&i(this.formatLanguageCode(e)),n.forEach(e=>{r.indexOf(e)<0&&i(this.formatLanguageCode(e))}),r}},ue={zero:0,one:1,two:2,few:3,many:4,other:5},de={select:e=>e===1?`one`:`other`,resolvedOptions:()=>({pluralCategories:[`one`,`other`]})},fe=class{constructor(e,t={}){this.languageUtils=e,this.options=t,this.logger=te.create(`pluralResolver`),this.pluralRulesCache={}}addRule(e,t){this.rules[e]=t}clearCache(){this.pluralRulesCache={}}getRule(e,t={}){let n=ee(e===`dev`?`en`:e),r=t.ordinal?`ordinal`:`cardinal`,i=JSON.stringify({cleanedCode:n,type:r});if(i in this.pluralRulesCache)return this.pluralRulesCache[i];let a;try{a=new Intl.PluralRules(n,{type:r})}catch{if(!Intl)return this.logger.error(`No Intl support, please use an Intl polyfill!`),de;if(!e.match(/-|_/))return de;let n=this.languageUtils.getLanguagePartFromCode(e);a=this.getRule(n,t)}return this.pluralRulesCache[i]=a,a}needsPlural(e,t={}){let n=this.getRule(e,t);return n||=this.getRule(`dev`,t),n?.resolvedOptions().pluralCategories.length>1}getPluralFormsOfKey(e,t,n={}){return this.getSuffixes(e,n).map(e=>`${t}${e}`)}getSuffixes(e,t={}){let n=this.getRule(e,t);return n||=this.getRule(`dev`,t),n?n.resolvedOptions().pluralCategories.sort((e,t)=>ue[e]-ue[t]).map(e=>`${this.options.prepend}${t.ordinal?`ordinal${this.options.prepend}`:``}${e}`):[]}getSuffix(e,t,n={}){let r=this.getRule(e,n);return r?`${this.options.prepend}${n.ordinal?`ordinal${this.options.prepend}`:``}${r.select(t)}`:(this.logger.warn(`no plural rule found for: ${e}`),this.getSuffix(`dev`,t,n))}},pe=(e,t,n,r=`.`,i=!0)=>{let a=M(e,t,n);return!a&&i&&x(n)&&(a=V(e,n,r),a===void 0&&(a=V(t,n,r))),a},me=e=>e.replace(/\$/g,`$$$$`),he=class{constructor(e={}){this.logger=te.create(`interpolator`),this.options=e,this.format=e?.interpolation?.format||(e=>e),this.init(e)}init(e={}){e.interpolation||={escapeValue:!0};let{escape:t,escapeValue:n,useRawValueToEscape:r,prefix:i,prefixEscaped:a,suffix:o,suffixEscaped:s,formatSeparator:c,unescapeSuffix:l,unescapePrefix:u,nestingPrefix:d,nestingPrefixEscaped:f,nestingSuffix:p,nestingSuffixEscaped:m,nestingOptionsSeparator:h,maxReplaces:g,alwaysFormat:_}=e.interpolation;this.escape=t===void 0?I:t,this.escapeValue=n===void 0?!0:n,this.useRawValueToEscape=r===void 0?!1:r,this.prefix=i?P(i):a||`{{`,this.suffix=o?P(o):s||`}}`,this.formatSeparator=c||`,`,this.unescapePrefix=l?``:u||`-`,this.unescapeSuffix=this.unescapePrefix?``:l||``,this.nestingPrefix=d?P(d):f||P(`$t(`),this.nestingSuffix=p?P(p):m||P(`)`),this.nestingOptionsSeparator=h||`,`,this.maxReplaces=g||1e3,this.alwaysFormat=_===void 0?!1:_,this.resetRegExp()}reset(){this.options&&this.init(this.options)}resetRegExp(){let e=(e,t)=>e?.source===t?(e.lastIndex=0,e):new RegExp(t,`g`);this.regexp=e(this.regexp,`${this.prefix}(.+?)${this.suffix}`),this.regexpUnescape=e(this.regexpUnescape,`${this.prefix}${this.unescapePrefix}(.+?)${this.unescapeSuffix}${this.suffix}`),this.nestingRegexp=e(this.nestingRegexp,`${this.nestingPrefix}((?:[^()"']+|"[^"]*"|'[^']*'|\\((?:[^()]|"[^"]*"|'[^']*')*\\))*?)${this.nestingSuffix}`)}interpolate(e,t,n,r){let i,a,o,s=this.options&&this.options.interpolation&&this.options.interpolation.defaultVariables||{},c=e=>{if(e.indexOf(this.formatSeparator)<0){let i=pe(t,s,e,this.options.keySeparator,this.options.ignoreJSONStructure);return this.alwaysFormat?this.format(i,void 0,n,{...r,...t,interpolationkey:e}):i}let i=e.split(this.formatSeparator),a=i.shift().trim(),o=i.join(this.formatSeparator).trim();return this.format(pe(t,s,a,this.options.keySeparator,this.options.ignoreJSONStructure),o,n,{...r,...t,interpolationkey:a})};this.resetRegExp();let l=r?.missingInterpolationHandler||this.options.missingInterpolationHandler,u=r?.interpolation?.skipOnVariables===void 0?this.options.interpolation.skipOnVariables:r.interpolation.skipOnVariables;return[{regex:this.regexpUnescape,safeValue:e=>me(e)},{regex:this.regexp,safeValue:e=>this.escapeValue?me(this.escape(e)):me(e)}].forEach(t=>{for(o=0;i=t.regex.exec(e);){let n=i[1].trim();if(a=c(n),a===void 0)if(typeof l==`function`){let t=l(e,i,r);a=x(t)?t:``}else if(r&&Object.prototype.hasOwnProperty.call(r,n))a=``;else if(u){a=i[0];continue}else this.logger.warn(`missed to pass in variable ${n} for interpolating ${e}`),a=``;else !x(a)&&!this.useRawValueToEscape&&(a=C(a));let s=t.safeValue(a);if(e=e.replace(i[0],s),u?(t.regex.lastIndex+=a.length,t.regex.lastIndex-=i[0].length):t.regex.lastIndex=0,o++,o>=this.maxReplaces)break}}),e}nest(e,t,n={}){let r,i,a,o=(e,t)=>{let n=this.nestingOptionsSeparator;if(e.indexOf(n)<0)return e;let r=e.split(RegExp(`${n}[ ]*{`)),i=`{${r[1]}`;e=r[0],i=this.interpolate(i,a);let o=i.match(/'/g),s=i.match(/"/g);((o?.length??0)%2==0&&!s||s.length%2!=0)&&(i=i.replace(/'/g,`"`));try{a=JSON.parse(i),t&&(a={...t,...a})}catch(t){return this.logger.warn(`failed parsing options string in nesting for key ${e}`,t),`${e}${n}${i}`}return a.defaultValue&&a.defaultValue.indexOf(this.prefix)>-1&&delete a.defaultValue,e};for(;r=this.nestingRegexp.exec(e);){let s=[];a={...n},a=a.replace&&!x(a.replace)?a.replace:a,a.applyPostProcessor=!1,delete a.defaultValue;let c=/{.*}/.test(r[1])?r[1].lastIndexOf(`}`)+1:r[1].indexOf(this.formatSeparator);if(c!==-1&&(s=r[1].slice(c).split(this.formatSeparator).map(e=>e.trim()).filter(Boolean),r[1]=r[1].slice(0,c)),i=t(o.call(this,r[1].trim(),a),a),i&&r[0]===e&&!x(i))return i;x(i)||(i=C(i)),i||=(this.logger.warn(`missed to resolve ${r[1]} for nesting ${e}`),``),s.length&&(i=s.reduce((e,t)=>this.format(e,t,n.lng,{...n,interpolationkey:r[1].trim()}),i.trim())),e=e.replace(r[0],i),this.regexp.lastIndex=0}return e}},ge=e=>{let t=e.toLowerCase().trim(),n={};if(e.indexOf(`(`)>-1){let r=e.split(`(`);t=r[0].toLowerCase().trim();let i=r[1].substring(0,r[1].length-1);t===`currency`&&i.indexOf(`:`)<0?n.currency||=i.trim():t===`relativetime`&&i.indexOf(`:`)<0?n.range||=i.trim():i.split(`;`).forEach(e=>{if(e){let[t,...r]=e.split(`:`),i=r.join(`:`).trim().replace(/^'+|'+$/g,``),a=t.trim();n[a]||(n[a]=i),i===`false`&&(n[a]=!1),i===`true`&&(n[a]=!0),isNaN(i)||(n[a]=parseInt(i,10))}})}return{formatName:t,formatOptions:n}},_e=e=>{let t={};return(n,r,i)=>{let a=i;i&&i.interpolationkey&&i.formatParams&&i.formatParams[i.interpolationkey]&&i[i.interpolationkey]&&(a={...a,[i.interpolationkey]:void 0});let o=r+JSON.stringify(a),s=t[o];return s||(s=e(ee(r),i),t[o]=s),s(n)}},ve=e=>(t,n,r)=>e(ee(n),r)(t),ye=class{constructor(e={}){this.logger=te.create(`formatter`),this.options=e,this.init(e)}init(e,t={interpolation:{}}){this.formatSeparator=t.interpolation.formatSeparator||`,`;let n=t.cacheInBuiltFormats?_e:ve;this.formats={number:n((e,t)=>{let n=new Intl.NumberFormat(e,{...t});return e=>n.format(e)}),currency:n((e,t)=>{let n=new Intl.NumberFormat(e,{...t,style:`currency`});return e=>n.format(e)}),datetime:n((e,t)=>{let n=new Intl.DateTimeFormat(e,{...t});return e=>n.format(e)}),relativetime:n((e,t)=>{let n=new Intl.RelativeTimeFormat(e,{...t});return e=>n.format(e,t.range||`day`)}),list:n((e,t)=>{let n=new Intl.ListFormat(e,{...t});return e=>n.format(e)})}}add(e,t){this.formats[e.toLowerCase().trim()]=t}addCached(e,t){this.formats[e.toLowerCase().trim()]=_e(t)}format(e,t,n,r={}){let i=t.split(this.formatSeparator);if(i.length>1&&i[0].indexOf(`(`)>1&&i[0].indexOf(`)`)<0&&i.find(e=>e.indexOf(`)`)>-1)){let e=i.findIndex(e=>e.indexOf(`)`)>-1);i[0]=[i[0],...i.splice(1,e)].join(this.formatSeparator)}return i.reduce((e,t)=>{let{formatName:i,formatOptions:a}=ge(t);if(this.formats[i]){let t=e;try{let o=r?.formatParams?.[r.interpolationkey]||{},s=o.locale||o.lng||r.locale||r.lng||n;t=this.formats[i](e,s,{...a,...r,...o})}catch(e){this.logger.warn(e)}return t}else this.logger.warn(`there was no format function for ${i}`);return e},e)}},be=(e,t)=>{e.pending[t]!==void 0&&(delete e.pending[t],e.pendingCount--)},xe=class extends ne{constructor(e,t,n,r={}){super(),this.backend=e,this.store=t,this.services=n,this.languageUtils=n.languageUtils,this.options=r,this.logger=te.create(`backendConnector`),this.waitingReads=[],this.maxParallelReads=r.maxParallelReads||10,this.readingCalls=0,this.maxRetries=r.maxRetries>=0?r.maxRetries:5,this.retryTimeout=r.retryTimeout>=1?r.retryTimeout:350,this.state={},this.queue=[],this.backend?.init?.(n,r.backend,r)}queueLoad(e,t,n,r){let i={},a={},o={},s={};return e.forEach(e=>{let r=!0;t.forEach(t=>{let o=`${e}|${t}`;!n.reload&&this.store.hasResourceBundle(e,t)?this.state[o]=2:this.state[o]<0||(this.state[o]===1?a[o]===void 0&&(a[o]=!0):(this.state[o]=1,r=!1,a[o]===void 0&&(a[o]=!0),i[o]===void 0&&(i[o]=!0),s[t]===void 0&&(s[t]=!0)))}),r||(o[e]=!0)}),(Object.keys(i).length||Object.keys(a).length)&&this.queue.push({pending:a,pendingCount:Object.keys(a).length,loaded:{},errors:[],callback:r}),{toLoad:Object.keys(i),pending:Object.keys(a),toLoadLanguages:Object.keys(o),toLoadNamespaces:Object.keys(s)}}loaded(e,t,n){let r=e.split(`|`),i=r[0],a=r[1];t&&this.emit(`failedLoading`,i,a,t),!t&&n&&this.store.addResourceBundle(i,a,n,void 0,void 0,{skipCopy:!0}),this.state[e]=t?-1:2,t&&n&&(this.state[e]=0);let o={};this.queue.forEach(n=>{A(n.loaded,[i],a),be(n,e),t&&n.errors.push(t),n.pendingCount===0&&!n.done&&(Object.keys(n.loaded).forEach(e=>{o[e]||(o[e]={});let t=n.loaded[e];t.length&&t.forEach(t=>{o[e][t]===void 0&&(o[e][t]=!0)})}),n.done=!0,n.errors.length?n.callback(n.errors):n.callback())}),this.emit(`loaded`,o),this.queue=this.queue.filter(e=>!e.done)}read(e,t,n,r=0,i=this.retryTimeout,a){if(!e.length)return a(null,{});if(this.readingCalls>=this.maxParallelReads){this.waitingReads.push({lng:e,ns:t,fcName:n,tried:r,wait:i,callback:a});return}this.readingCalls++;let o=(o,s)=>{if(this.readingCalls--,this.waitingReads.length>0){let e=this.waitingReads.shift();this.read(e.lng,e.ns,e.fcName,e.tried,e.wait,e.callback)}if(o&&s&&r{this.read.call(this,e,t,n,r+1,i*2,a)},i);return}a(o,s)},s=this.backend[n].bind(this.backend);if(s.length===2){try{let n=s(e,t);n&&typeof n.then==`function`?n.then(e=>o(null,e)).catch(o):o(null,n)}catch(e){o(e)}return}return s(e,t,o)}prepareLoading(e,t,n={},r){if(!this.backend)return this.logger.warn(`No backend was added via i18next.use. Will not load resources.`),r&&r();x(e)&&(e=this.languageUtils.toResolveHierarchy(e)),x(t)&&(t=[t]);let i=this.queueLoad(e,t,n,r);if(!i.toLoad.length)return i.pending.length||r(),null;i.toLoad.forEach(e=>{this.loadOne(e)})}load(e,t,n){this.prepareLoading(e,t,{},n)}reload(e,t,n){this.prepareLoading(e,t,{reload:!0},n)}loadOne(e,t=``){let n=e.split(`|`),r=n[0],i=n[1];this.read(r,i,`read`,void 0,void 0,(n,a)=>{n&&this.logger.warn(`${t}loading namespace ${i} for language ${r} failed`,n),!n&&a&&this.logger.log(`${t}loaded namespace ${i} for language ${r}`,a),this.loaded(e,n,a)})}saveMissing(e,t,n,r,i,a={},o=()=>{}){if(this.services?.utils?.hasLoadedNamespace&&!this.services?.utils?.hasLoadedNamespace(t)){this.logger.warn(`did not save key "${n}" as the namespace "${t}" was not yet loaded`,`This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!`);return}if(!(n==null||n===``)){if(this.backend?.create){let s={...a,isUpdate:i},c=this.backend.create.bind(this.backend);if(c.length<6)try{let i;i=c.length===5?c(e,t,n,r,s):c(e,t,n,r),i&&typeof i.then==`function`?i.then(e=>o(null,e)).catch(o):o(null,i)}catch(e){o(e)}else c(e,t,n,r,o,s)}!e||!e[0]||this.store.addResource(e[0],t,n,r)}}},Se=()=>({debug:!1,initAsync:!0,ns:[`translation`],defaultNS:[`translation`],fallbackLng:[`dev`],fallbackNS:!1,supportedLngs:!1,nonExplicitSupportedLngs:!1,load:`all`,preload:!1,simplifyPluralSuffix:!0,keySeparator:`.`,nsSeparator:`:`,pluralSeparator:`_`,contextSeparator:`_`,partialBundledLanguages:!1,saveMissing:!1,updateMissing:!1,saveMissingTo:`fallback`,saveMissingPlurals:!0,missingKeyHandler:!1,missingInterpolationHandler:!1,postProcess:!1,postProcessPassResolved:!1,returnNull:!1,returnEmptyString:!0,returnObjects:!1,joinArrays:!1,returnedObjectHandler:!1,parseMissingKeyHandler:!1,appendNamespaceToMissingKey:!1,appendNamespaceToCIMode:!1,overloadTranslationOptionHandler:e=>{let t={};if(typeof e[1]==`object`&&(t=e[1]),x(e[1])&&(t.defaultValue=e[1]),x(e[2])&&(t.tDescription=e[2]),typeof e[2]==`object`||typeof e[3]==`object`){let n=e[3]||e[2];Object.keys(n).forEach(e=>{t[e]=n[e]})}return t},interpolation:{escapeValue:!0,format:e=>e,prefix:`{{`,suffix:`}}`,formatSeparator:`,`,unescapePrefix:`-`,nestingPrefix:`$t(`,nestingSuffix:`)`,nestingOptionsSeparator:`,`,maxReplaces:1e3,skipOnVariables:!0},cacheInBuiltFormats:!0}),Ce=e=>(x(e.ns)&&(e.ns=[e.ns]),x(e.fallbackLng)&&(e.fallbackLng=[e.fallbackLng]),x(e.fallbackNS)&&(e.fallbackNS=[e.fallbackNS]),e.supportedLngs?.indexOf?.(`cimode`)<0&&(e.supportedLngs=e.supportedLngs.concat([`cimode`])),typeof e.initImmediate==`boolean`&&(e.initAsync=e.initImmediate),e),we=()=>{},Te=e=>{Object.getOwnPropertyNames(Object.getPrototypeOf(e)).forEach(t=>{typeof e[t]==`function`&&(e[t]=e[t].bind(e))})},Ee=class e extends ne{constructor(e={},t){if(super(),this.options=Ce(e),this.services={},this.logger=te,this.modules={external:[]},Te(this),t&&!this.isInitialized&&!e.isClone){if(!this.options.initAsync)return this.init(e,t),this;setTimeout(()=>{this.init(e,t)},0)}}init(e={},t){this.isInitializing=!0,typeof e==`function`&&(t=e,e={}),e.defaultNS==null&&e.ns&&(x(e.ns)?e.defaultNS=e.ns:e.ns.indexOf(`translation`)<0&&(e.defaultNS=e.ns[0]));let n=Se();this.options={...n,...this.options,...Ce(e)},this.options.interpolation={...n.interpolation,...this.options.interpolation},e.keySeparator!==void 0&&(this.options.userDefinedKeySeparator=e.keySeparator),e.nsSeparator!==void 0&&(this.options.userDefinedNsSeparator=e.nsSeparator);let r=e=>e?typeof e==`function`?new e:e:null;if(!this.options.isClone){this.modules.logger?te.init(r(this.modules.logger),this.options):te.init(null,this.options);let e;e=this.modules.formatter?this.modules.formatter:ye;let t=new le(this.options);this.store=new re(this.options.resources,this.options);let i=this.services;i.logger=te,i.resourceStore=this.store,i.languageUtils=t,i.pluralResolver=new fe(t,{prepend:this.options.pluralSeparator,simplifyPluralSuffix:this.options.simplifyPluralSuffix}),this.options.interpolation.format&&this.options.interpolation.format!==n.interpolation.format&&this.logger.deprecate(`init: you are still using the legacy format function, please use the new approach: https://www.i18next.com/translation-function/formatting`),e&&(!this.options.interpolation.format||this.options.interpolation.format===n.interpolation.format)&&(i.formatter=r(e),i.formatter.init&&i.formatter.init(i,this.options),this.options.interpolation.format=i.formatter.format.bind(i.formatter)),i.interpolator=new he(this.options),i.utils={hasLoadedNamespace:this.hasLoadedNamespace.bind(this)},i.backendConnector=new xe(r(this.modules.backend),i.resourceStore,i,this.options),i.backendConnector.on(`*`,(e,...t)=>{this.emit(e,...t)}),this.modules.languageDetector&&(i.languageDetector=r(this.modules.languageDetector),i.languageDetector.init&&i.languageDetector.init(i,this.options.detection,this.options)),this.modules.i18nFormat&&(i.i18nFormat=r(this.modules.i18nFormat),i.i18nFormat.init&&i.i18nFormat.init(this)),this.translator=new ce(this.services,this.options),this.translator.on(`*`,(e,...t)=>{this.emit(e,...t)}),this.modules.external.forEach(e=>{e.init&&e.init(this)})}if(this.format=this.options.interpolation.format,t||=we,this.options.fallbackLng&&!this.services.languageDetector&&!this.options.lng){let e=this.services.languageUtils.getFallbackCodes(this.options.fallbackLng);e.length>0&&e[0]!==`dev`&&(this.options.lng=e[0])}!this.services.languageDetector&&!this.options.lng&&this.logger.warn(`init: no languageDetector is used and no lng is defined`),[`getResource`,`hasResourceBundle`,`getResourceBundle`,`getDataByLanguage`].forEach(e=>{this[e]=(...t)=>this.store[e](...t)}),[`addResource`,`addResources`,`addResourceBundle`,`removeResourceBundle`].forEach(e=>{this[e]=(...t)=>(this.store[e](...t),this)});let i=S(),a=()=>{let e=(e,n)=>{this.isInitializing=!1,this.isInitialized&&!this.initializedStoreOnce&&this.logger.warn(`init: i18next is already initialized. You should call init just once!`),this.isInitialized=!0,this.options.isClone||this.logger.log(`initialized`,this.options),this.emit(`initialized`,this.options),i.resolve(n),t(e,n)};if(this.languages&&!this.isInitialized)return e(null,this.t.bind(this));this.changeLanguage(this.options.lng,e)};return this.options.resources||!this.options.initAsync?a():setTimeout(a,0),i}loadResources(e,t=we){let n=t,r=x(e)?e:this.language;if(typeof e==`function`&&(n=e),!this.options.resources||this.options.partialBundledLanguages){if(r?.toLowerCase()===`cimode`&&(!this.options.preload||this.options.preload.length===0))return n();let e=[],t=t=>{t&&t!==`cimode`&&this.services.languageUtils.toResolveHierarchy(t).forEach(t=>{t!==`cimode`&&e.indexOf(t)<0&&e.push(t)})};r?t(r):this.services.languageUtils.getFallbackCodes(this.options.fallbackLng).forEach(e=>t(e)),this.options.preload?.forEach?.(e=>t(e)),this.services.backendConnector.load(e,this.options.ns,e=>{!e&&!this.resolvedLanguage&&this.language&&this.setResolvedLanguage(this.language),n(e)})}else n(null)}reloadResources(e,t,n){let r=S();return typeof e==`function`&&(n=e,e=void 0),typeof t==`function`&&(n=t,t=void 0),e||=this.languages,t||=this.options.ns,n||=we,this.services.backendConnector.reload(e,t,e=>{r.resolve(),n(e)}),r}use(e){if(!e)throw Error(`You are passing an undefined module! Please check the object you are passing to i18next.use()`);if(!e.type)throw Error(`You are passing a wrong module! Please check the object you are passing to i18next.use()`);return e.type===`backend`&&(this.modules.backend=e),(e.type===`logger`||e.log&&e.warn&&e.error)&&(this.modules.logger=e),e.type===`languageDetector`&&(this.modules.languageDetector=e),e.type===`i18nFormat`&&(this.modules.i18nFormat=e),e.type===`postProcessor`&&U.addPostProcessor(e),e.type===`formatter`&&(this.modules.formatter=e),e.type===`3rdParty`&&this.modules.external.push(e),this}setResolvedLanguage(e){if(!(!e||!this.languages)&&!([`cimode`,`dev`].indexOf(e)>-1)){for(let e=0;e-1)&&this.store.hasLanguageSomeTranslations(t)){this.resolvedLanguage=t;break}}!this.resolvedLanguage&&this.languages.indexOf(e)<0&&this.store.hasLanguageSomeTranslations(e)&&(this.resolvedLanguage=e,this.languages.unshift(e))}}changeLanguage(e,t){this.isLanguageChangingTo=e;let n=S();this.emit(`languageChanging`,e);let r=e=>{this.language=e,this.languages=this.services.languageUtils.toResolveHierarchy(e),this.resolvedLanguage=void 0,this.setResolvedLanguage(e)},i=(i,a)=>{a?this.isLanguageChangingTo===e&&(r(a),this.translator.changeLanguage(a),this.isLanguageChangingTo=void 0,this.emit(`languageChanged`,a),this.logger.log(`languageChanged`,a)):this.isLanguageChangingTo=void 0,n.resolve((...e)=>this.t(...e)),t&&t(i,(...e)=>this.t(...e))},a=t=>{!e&&!t&&this.services.languageDetector&&(t=[]);let n=x(t)?t:t&&t[0],a=this.store.hasLanguageSomeTranslations(n)?n:this.services.languageUtils.getBestMatchFromCodes(x(t)?[t]:t);a&&(this.language||r(a),this.translator.language||this.translator.changeLanguage(a),this.services.languageDetector?.cacheUserLanguage?.(a)),this.loadResources(a,e=>{i(e,a)})};return!e&&this.services.languageDetector&&!this.services.languageDetector.async?a(this.services.languageDetector.detect()):!e&&this.services.languageDetector&&this.services.languageDetector.async?this.services.languageDetector.detect.length===0?this.services.languageDetector.detect().then(a):this.services.languageDetector.detect(a):a(e),n}getFixedT(e,t,n){let r=(e,t,...i)=>{let a;a=typeof t==`object`?{...t}:this.options.overloadTranslationOptionHandler([e,t].concat(i)),a.lng=a.lng||r.lng,a.lngs=a.lngs||r.lngs,a.ns=a.ns||r.ns,a.keyPrefix!==``&&(a.keyPrefix=a.keyPrefix||n||r.keyPrefix);let o=this.options.keySeparator||`.`,s;return a.keyPrefix&&Array.isArray(e)?s=e.map(e=>(typeof e==`function`&&(e=W(e,{...this.options,...t})),`${a.keyPrefix}${o}${e}`)):(typeof e==`function`&&(e=W(e,{...this.options,...t})),s=a.keyPrefix?`${a.keyPrefix}${o}${e}`:e),this.t(s,a)};return x(e)?r.lng=e:r.lngs=e,r.ns=t,r.keyPrefix=n,r}t(...e){return this.translator?.translate(...e)}exists(...e){return this.translator?.exists(...e)}setDefaultNamespace(e){this.options.defaultNS=e}hasLoadedNamespace(e,t={}){if(!this.isInitialized)return this.logger.warn(`hasLoadedNamespace: i18next was not initialized`,this.languages),!1;if(!this.languages||!this.languages.length)return this.logger.warn(`hasLoadedNamespace: i18n.languages were undefined or empty`,this.languages),!1;let n=t.lng||this.resolvedLanguage||this.languages[0],r=this.options?this.options.fallbackLng:!1,i=this.languages[this.languages.length-1];if(n.toLowerCase()===`cimode`)return!0;let a=(e,t)=>{let n=this.services.backendConnector.state[`${e}|${t}`];return n===-1||n===0||n===2};if(t.precheck){let e=t.precheck(this,a);if(e!==void 0)return e}return!!(this.hasResourceBundle(n,e)||!this.services.backendConnector.backend||this.options.resources&&!this.options.partialBundledLanguages||a(n,e)&&(!r||a(i,e)))}loadNamespaces(e,t){let n=S();return this.options.ns?(x(e)&&(e=[e]),e.forEach(e=>{this.options.ns.indexOf(e)<0&&this.options.ns.push(e)}),this.loadResources(e=>{n.resolve(),t&&t(e)}),n):(t&&t(),Promise.resolve())}loadLanguages(e,t){let n=S();x(e)&&(e=[e]);let r=this.options.preload||[],i=e.filter(e=>r.indexOf(e)<0&&this.services.languageUtils.isSupportedCode(e));return i.length?(this.options.preload=r.concat(i),this.loadResources(e=>{n.resolve(),t&&t(e)}),n):(t&&t(),Promise.resolve())}dir(e){if(e||=this.resolvedLanguage||(this.languages?.length>0?this.languages[0]:this.language),!e)return`rtl`;try{let t=new Intl.Locale(e);if(t&&t.getTextInfo){let e=t.getTextInfo();if(e&&e.direction)return e.direction}}catch{}let t=`ar.shu.sqr.ssh.xaa.yhd.yud.aao.abh.abv.acm.acq.acw.acx.acy.adf.ads.aeb.aec.afb.ajp.apc.apd.arb.arq.ars.ary.arz.auz.avl.ayh.ayl.ayn.ayp.bbz.pga.he.iw.ps.pbt.pbu.pst.prp.prd.ug.ur.ydd.yds.yih.ji.yi.hbo.men.xmn.fa.jpr.peo.pes.prs.dv.sam.ckb`.split(`.`),n=this.services?.languageUtils||new le(Se());return e.toLowerCase().indexOf(`-latn`)>1?`ltr`:t.indexOf(n.getLanguagePartFromCode(e))>-1||e.toLowerCase().indexOf(`-arab`)>1?`rtl`:`ltr`}static createInstance(t={},n){let r=new e(t,n);return r.createInstance=e.createInstance,r}cloneInstance(t={},n=we){let r=t.forkResourceStore;r&&delete t.forkResourceStore;let i={...this.options,...t,isClone:!0},a=new e(i);return(t.debug!==void 0||t.prefix!==void 0)&&(a.logger=a.logger.clone(t)),[`store`,`services`,`language`].forEach(e=>{a[e]=this[e]}),a.services={...this.services},a.services.utils={hasLoadedNamespace:a.hasLoadedNamespace.bind(a)},r&&(a.store=new re(Object.keys(this.store.data).reduce((e,t)=>(e[t]={...this.store.data[t]},e[t]=Object.keys(e[t]).reduce((n,r)=>(n[r]={...e[t][r]},n),e[t]),e),{}),i),a.services.resourceStore=a.store),a.translator=new ce(a.services,i),a.translator.on(`*`,(e,...t)=>{a.emit(e,...t)}),a.init(i,n),a.translator.options=i,a.translator.backendConnector.services.utils={hasLoadedNamespace:a.hasLoadedNamespace.bind(a)},a}toJSON(){return{options:this.options,store:this.store,language:this.language,languages:this.languages,resolvedLanguage:this.resolvedLanguage}}}.createInstance();Ee.createInstance,Ee.dir,Ee.init,Ee.loadResources,Ee.reloadResources,Ee.use,Ee.changeLanguage,Ee.getFixedT,Ee.t,Ee.exists,Ee.setDefaultNamespace,Ee.hasLoadedNamespace,Ee.loadNamespaces,Ee.loadLanguages;var De=(e,t,n,r)=>{let i=[n,{code:t,...r||{}}];if(e?.services?.logger?.forward)return e.services.logger.forward(i,`warn`,`react-i18next::`,!0);Pe(i[0])&&(i[0]=`react-i18next:: ${i[0]}`),e?.services?.logger?.warn?e.services.logger.warn(...i):console?.warn&&console.warn(...i)},Oe={},ke=(e,t,n,r)=>{Pe(n)&&Oe[n]||(Pe(n)&&(Oe[n]=new Date),De(e,t,n,r))},Ae=(e,t)=>()=>{if(e.isInitialized)t();else{let n=()=>{setTimeout(()=>{e.off(`initialized`,n)},0),t()};e.on(`initialized`,n)}},je=(e,t,n)=>{e.loadNamespaces(t,Ae(e,n))},Me=(e,t,n,r)=>{if(Pe(n)&&(n=[n]),e.options.preload&&e.options.preload.indexOf(t)>-1)return je(e,n,r);n.forEach(t=>{e.options.ns.indexOf(t)<0&&e.options.ns.push(t)}),e.loadLanguages(t,Ae(e,r))},Ne=(e,t,n={})=>!t.languages||!t.languages.length?(ke(t,`NO_LANGUAGES`,`i18n.languages were undefined or empty`,{languages:t.languages}),!0):t.hasLoadedNamespace(e,{lng:n.lng,precheck:(t,r)=>{if(n.bindI18n&&n.bindI18n.indexOf(`languageChanging`)>-1&&t.services.backendConnector.backend&&t.isLanguageChangingTo&&!r(t.isLanguageChangingTo,e))return!1}}),Pe=e=>typeof e==`string`,Fe=e=>typeof e==`object`&&!!e,Ie=/&(?:amp|#38|lt|#60|gt|#62|apos|#39|quot|#34|nbsp|#160|copy|#169|reg|#174|hellip|#8230|#x2F|#47);/g,Le={"&":`&`,"&":`&`,"<":`<`,"<":`<`,">":`>`,">":`>`,"'":`'`,"'":`'`,""":`"`,""":`"`," ":` `," ":` `,"©":`©`,"©":`©`,"®":`®`,"®":`®`,"…":`…`,"…":`…`,"/":`/`,"/":`/`},Re=e=>Le[e],ze={bindI18n:`languageChanged`,bindI18nStore:``,transEmptyNodeValue:``,transSupportBasicHtmlNodes:!0,transWrapTextNodes:``,transKeepBasicHtmlNodesFor:[`br`,`strong`,`i`,`p`],useSuspense:!0,unescape:e=>e.replace(Ie,Re),transDefaultProps:void 0},Be=(e={})=>{ze={...ze,...e}},Ve=()=>ze,He,Ue=e=>{He=e},We=()=>He,Ge={type:`3rdParty`,init(e){Be(e.options.react),Ue(e)}},Ke=(0,y.createContext)(),qe=class{constructor(){this.usedNamespaces={}}addUsedNamespaces(e){e.forEach(e=>{this.usedNamespaces[e]||(this.usedNamespaces[e]=!0)})}getUsedNamespaces(){return Object.keys(this.usedNamespaces)}},Je=o((e=>{var t=f();function n(e,t){return e===t&&(e!==0||1/e==1/t)||e!==e&&t!==t}var r=typeof Object.is==`function`?Object.is:n,i=t.useState,a=t.useEffect,o=t.useLayoutEffect,s=t.useDebugValue;function c(e,t){var n=t(),r=i({inst:{value:n,getSnapshot:t}}),c=r[0].inst,u=r[1];return o(function(){c.value=n,c.getSnapshot=t,l(c)&&u({inst:c})},[e,n,t]),a(function(){return l(c)&&u({inst:c}),e(function(){l(c)&&u({inst:c})})},[e]),s(n),n}function l(e){var t=e.getSnapshot;e=e.value;try{var n=t();return!r(e,n)}catch{return!0}}function u(e,t){return t()}var d=typeof window>`u`||window.document===void 0||window.document.createElement===void 0?u:c;e.useSyncExternalStore=t.useSyncExternalStore===void 0?d:t.useSyncExternalStore})),Ye=o(((e,t)=>{t.exports=Je()})),Xe=Ye(),Ze={t:(e,t)=>Pe(t)?t:Fe(t)&&Pe(t.defaultValue)?t.defaultValue:Array.isArray(e)?e[e.length-1]:e,ready:!1},Qe=()=>()=>{},$e=(e,t={})=>{let{i18n:n}=t,{i18n:r,defaultNS:i}=(0,y.useContext)(Ke)||{},a=n||r||We();a&&!a.reportNamespaces&&(a.reportNamespaces=new qe),a||ke(a,`NO_I18NEXT_INSTANCE`,`useTranslation: You will need to pass in an i18next instance by using initReactI18next`);let o=(0,y.useMemo)(()=>({...Ve(),...a?.options?.react,...t}),[a,t]),{useSuspense:s,keyPrefix:c}=o,l=e||i||a?.options?.defaultNS,u=Pe(l)?[l]:l||[`translation`],d=(0,y.useMemo)(()=>u,u);a?.reportNamespaces?.addUsedNamespaces?.(d);let f=(0,y.useRef)(0),p=(0,y.useCallback)(e=>{if(!a)return Qe;let{bindI18n:t,bindI18nStore:n}=o,r=()=>{f.current+=1,e()};return t&&a.on(t,r),n&&a.store.on(n,r),()=>{t&&t.split(` `).forEach(e=>a.off(e,r)),n&&n.split(` `).forEach(e=>a.store.off(e,r))}},[a,o]),m=(0,y.useRef)(),h=(0,y.useCallback)(()=>{if(!a)return Ze;let e=!!(a.isInitialized||a.initializedStoreOnce)&&d.every(e=>Ne(e,a,o)),n=t.lng||a.language,r=f.current,i=m.current;if(i&&i.ready===e&&i.lng===n&&i.keyPrefix===c&&i.revision===r)return i;let s={t:a.getFixedT(n,o.nsMode===`fallback`?d:d[0],c),ready:e,lng:n,keyPrefix:c,revision:r};return m.current=s,s},[a,d,c,o,t.lng]),[g,_]=(0,y.useState)(0),{t:v,ready:b}=(0,Xe.useSyncExternalStore)(p,h,h);(0,y.useEffect)(()=>{if(a&&!b&&!s){let e=()=>_(e=>e+1);t.lng?Me(a,t.lng,d,e):je(a,d,e)}},[a,t.lng,d,b,s,g]);let x=a||{},S=(0,y.useRef)(null),C=(0,y.useRef)(),w=e=>{let t=Object.getOwnPropertyDescriptors(e);t.__original&&delete t.__original;let n=Object.create(Object.getPrototypeOf(e),t);if(!Object.prototype.hasOwnProperty.call(n,`__original`))try{Object.defineProperty(n,"__original",{value:e,writable:!1,enumerable:!1,configurable:!1})}catch{}return n},T=(0,y.useMemo)(()=>{let e=x,t=e?.language,n=e;e&&(S.current&&S.current.__original===e&&C.current===t?n=S.current:(n=w(e),S.current=n,C.current=t));let r=[v,n,b];return r.t=v,r.i18n=n,r.ready=b,r},[v,x,b,x.resolvedLanguage,x.language,x.languages]);if(a&&s&&!b)throw new Promise(e=>{let n=()=>e();t.lng?Me(a,t.lng,d,n):je(a,d,n)});return T},{slice:et,forEach:tt}=[];function nt(e){return tt.call(et.call(arguments,1),t=>{if(t)for(let n in t)e[n]===void 0&&(e[n]=t[n])}),e}function rt(e){return typeof e==`string`?[/<\s*script.*?>/i,/<\s*\/\s*script\s*>/i,/<\s*img.*?on\w+\s*=/i,/<\s*\w+\s*on\w+\s*=.*?>/i,/javascript\s*:/i,/vbscript\s*:/i,/expression\s*\(/i,/eval\s*\(/i,/alert\s*\(/i,/document\.cookie/i,/document\.write\s*\(/i,/window\.location/i,/innerHTML/i].some(t=>t.test(e)):!1}var it=/^[\u0009\u0020-\u007e\u0080-\u00ff]+$/,at=function(e,t){let n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{path:`/`},r=`${e}=${encodeURIComponent(t)}`;if(n.maxAge>0){let e=n.maxAge-0;if(Number.isNaN(e))throw Error(`maxAge should be a Number`);r+=`; Max-Age=${Math.floor(e)}`}if(n.domain){if(!it.test(n.domain))throw TypeError(`option domain is invalid`);r+=`; Domain=${n.domain}`}if(n.path){if(!it.test(n.path))throw TypeError(`option path is invalid`);r+=`; Path=${n.path}`}if(n.expires){if(typeof n.expires.toUTCString!=`function`)throw TypeError(`option expires is invalid`);r+=`; Expires=${n.expires.toUTCString()}`}if(n.httpOnly&&(r+=`; HttpOnly`),n.secure&&(r+=`; Secure`),n.sameSite)switch(typeof n.sameSite==`string`?n.sameSite.toLowerCase():n.sameSite){case!0:r+=`; SameSite=Strict`;break;case`lax`:r+=`; SameSite=Lax`;break;case`strict`:r+=`; SameSite=Strict`;break;case`none`:r+=`; SameSite=None`;break;default:throw TypeError(`option sameSite is invalid`)}return n.partitioned&&(r+=`; Partitioned`),r},ot={create(e,t,n,r){let i=arguments.length>4&&arguments[4]!==void 0?arguments[4]:{path:`/`,sameSite:`strict`};n&&(i.expires=new Date,i.expires.setTime(i.expires.getTime()+n*60*1e3)),r&&(i.domain=r),document.cookie=at(e,t,i)},read(e){let t=`${e}=`,n=document.cookie.split(`;`);for(let e=0;e-1&&(e=window.location.hash.substring(window.location.hash.indexOf(`?`)));let r=e.substring(1).split(`&`);for(let e=0;e0&&r[e].substring(0,i)===t&&(n=r[e].substring(i+1))}}return n}},lt={name:`hash`,lookup(e){let{lookupHash:t,lookupFromHashIndex:n}=e,r;if(typeof window<`u`){let{hash:e}=window.location;if(e&&e.length>2){let i=e.substring(1);if(t){let e=i.split(`&`);for(let n=0;n0&&e[n].substring(0,i)===t&&(r=e[n].substring(i+1))}}if(r)return r;if(!r&&n>-1){let t=e.match(/\/([a-zA-Z-]*)/g);return Array.isArray(t)?t[typeof n==`number`?n:0]?.replace(`/`,``):void 0}}}return r}},ut=null,dt=()=>{if(ut!==null)return ut;try{if(ut=typeof window<`u`&&window.localStorage!==null,!ut)return!1;let e=`i18next.translate.boo`;window.localStorage.setItem(e,`foo`),window.localStorage.removeItem(e)}catch{ut=!1}return ut},ft={name:`localStorage`,lookup(e){let{lookupLocalStorage:t}=e;if(t&&dt())return window.localStorage.getItem(t)||void 0},cacheUserLanguage(e,t){let{lookupLocalStorage:n}=t;n&&dt()&&window.localStorage.setItem(n,e)}},pt=null,mt=()=>{if(pt!==null)return pt;try{if(pt=typeof window<`u`&&window.sessionStorage!==null,!pt)return!1;let e=`i18next.translate.boo`;window.sessionStorage.setItem(e,`foo`),window.sessionStorage.removeItem(e)}catch{pt=!1}return pt},ht={name:`sessionStorage`,lookup(e){let{lookupSessionStorage:t}=e;if(t&&mt())return window.sessionStorage.getItem(t)||void 0},cacheUserLanguage(e,t){let{lookupSessionStorage:n}=t;n&&mt()&&window.sessionStorage.setItem(n,e)}},gt={name:`navigator`,lookup(e){let t=[];if(typeof navigator<`u`){let{languages:e,userLanguage:n,language:r}=navigator;if(e)for(let n=0;n0?t:void 0}},_t={name:`htmlTag`,lookup(e){let{htmlTag:t}=e,n,r=t||(typeof document<`u`?document.documentElement:null);return r&&typeof r.getAttribute==`function`&&(n=r.getAttribute(`lang`)),n}},vt={name:`path`,lookup(e){let{lookupFromPathIndex:t}=e;if(typeof window>`u`)return;let n=window.location.pathname.match(/\/([a-zA-Z-]*)/g);if(Array.isArray(n))return n[typeof t==`number`?t:0]?.replace(`/`,``)}},yt={name:`subdomain`,lookup(e){let{lookupFromSubdomainIndex:t}=e,n=typeof t==`number`?t+1:1,r=typeof window<`u`&&window.location?.hostname?.match(/^(\w{2,5})\.(([a-z0-9-]{1,63}\.[a-z]{2,6})|localhost)/i);if(r)return r[n]}},bt=!1;try{document.cookie,bt=!0}catch{}var xt=[`querystring`,`cookie`,`localStorage`,`sessionStorage`,`navigator`,`htmlTag`];bt||xt.splice(1,1);var St=()=>({order:xt,lookupQuerystring:`lng`,lookupCookie:`i18next`,lookupLocalStorage:`i18nextLng`,lookupSessionStorage:`i18nextLng`,caches:[`localStorage`],excludeCacheFor:[`cimode`],convertDetectedLanguage:e=>e}),Ct=class{constructor(e){let t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{};this.type=`languageDetector`,this.detectors={},this.init(e,t)}init(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{languageUtils:{}},t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{},n=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{};this.services=e,this.options=nt(t,this.options||{},St()),typeof this.options.convertDetectedLanguage==`string`&&this.options.convertDetectedLanguage.indexOf(`15897`)>-1&&(this.options.convertDetectedLanguage=e=>e.replace(`-`,`_`)),this.options.lookupFromUrlIndex&&(this.options.lookupFromPathIndex=this.options.lookupFromUrlIndex),this.i18nOptions=n,this.addDetector(st),this.addDetector(ct),this.addDetector(ft),this.addDetector(ht),this.addDetector(gt),this.addDetector(_t),this.addDetector(vt),this.addDetector(yt),this.addDetector(lt)}addDetector(e){return this.detectors[e.name]=e,this}detect(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.order,t=[];return e.forEach(e=>{if(this.detectors[e]){let n=this.detectors[e].lookup(this.options);n&&typeof n==`string`&&(n=[n]),n&&(t=t.concat(n))}}),t=t.filter(e=>e!=null&&!rt(e)).map(e=>this.options.convertDetectedLanguage(e)),this.services&&this.services.languageUtils&&this.services.languageUtils.getBestMatchFromCodes?t:t.length>0?t[0]:null}cacheUserLanguage(e){let t=arguments.length>1&&arguments[1]!==void 0?arguments[1]:this.options.caches;t&&(this.options.excludeCacheFor&&this.options.excludeCacheFor.indexOf(e)>-1||t.forEach(t=>{this.detectors[t]&&this.detectors[t].cacheUserLanguage(e,this.options)}))}};Ct.type=`languageDetector`;var wt={en:{translation:{nav:{printers:`Printers`,archives:`Archives`,queue:`Print Queue`,stats:`Statistics`,profiles:`Profiles`,maintenance:`Maintenance`,projects:`Projects`,inventory:`Filament`,files:`File Manager`,makerworld:`MakerWorld`,notifications:`Notifications`,settings:`Settings`,system:`System`,collapseSidebar:`Collapse sidebar`,expandSidebar:`Expand sidebar`,update:`Update`,updateAvailable:`Update available: v{{version}}`,updateAvailableBanner:`Version {{version}} is available!`,viewUpdate:`View update`,viewOnGithub:`View on GitHub`,keyboardShortcuts:`Keyboard shortcuts (?)`,switchToLight:`Switch to light mode`,switchToDark:`Switch to dark mode`,switchToSystem:`Switch to system mode`,smartSwitches:`Smart Switches`,logout:`Logout`,installApp:`Install app`,installAppSuccess:`Bambuddy was installed`},common:{save:`Save`,saving:`Saving...`,cancel:`Cancel`,delete:`Delete`,edit:`Edit`,add:`Add`,close:`Close`,confirm:`Confirm`,loading:`Loading...`,error:`Error`,errorLoading:`Error loading data`,retry:`Retry`,success:`Success`,warning:`Warning`,enabled:`Enabled`,disabled:`Disabled`,yes:`Yes`,no:`No`,on:`On`,off:`Off`,all:`All`,none:`None`,search:`Search`,filter:`Filter`,sort:`Sort`,refresh:`Refresh`,download:`Download`,upload:`Upload`,uploading:`Uploading...`,uploadFailed:`Upload failed`,actions:`Actions`,status:`Status`,name:`Name`,description:`Description`,date:`Date`,time:`Time`,hours:`hours`,minutes:`minutes`,seconds:`seconds`,days:`days`,enable:`Enable`,disable:`Disable`,permissions:`Permissions`,noPrinters:`No printers configured`,noData:`No data available`,linkNotFound:`Link not found`,required:`Required`,optional:`Optional`,dismiss:`Dismiss`,apply:`Apply`,reset:`Reset`,export:`Export`,import:`Import`,clear:`Clear`,selectAll:`Select All`,deselectAll:`Deselect All`,noChange:`— No change —`,unchanged:`Unchanged`,unassigned:`Unassigned`,unknown:`Unknown`,unknownError:`Unknown error`,today:`Today`,tomorrow:`Tomorrow`,asap:`ASAP`,overdue:`Overdue`,now:`Now`,collapse:`Collapse`,expand:`Expand`,viewArchive:`View archive`,viewInFileManager:`View in File Manager`,addedBy:`Added by {{username}}`,prints:`prints`,more:`+{{count}} more`,ascending:`Ascending`,descending:`Descending`,back:`Back`,copy:`Copy`,copied:`Copied!`,printer:`Printer`,remove:`Remove`,type:`Type`,print:`Print`,rename:`Rename`,move:`Move`,create:`Create`,duplicate:`Duplicate`,left:`Left`,right:`Right`},printers:{title:`Printers`,addPrinter:`Add Printer`,addPreflight:{checking:`Checking connection...`,warning:`Some connection checks failed. This printer may show as offline. Review the checks below, fix what you can, or save anyway.`,back:`Back`,saveAnyway:`Save anyway`},editPrinter:`Edit Printer`,deletePrinter:`Delete Printer`,printerName:`Printer Name`,serialNumber:`Serial Number`,ipAddress:`IP Address / Hostname`,accessCode:`Access Code`,model:`Model`,nozzleCount:`Nozzle Count`,autoArchive:`Auto Archive`,status:{available:`Available`,idle:`Idle`,printing:`Printing`,paused:`Paused`,offline:`Offline`,problem:`Problem`,error:`Error`,finished:`Finished`,unknown:`Unknown`},temperatures:{nozzle:`Nozzle`,bed:`Bed`,chamber:`Chamber`},heaterHistory:{title:`Heater History`,openLabel:`View heater history`,nozzle:`Nozzle`,nozzle2:`Nozzle 2`,bed:`Bed`,chamber:`Chamber`,error:`Failed to load history`,empty:`No data recorded yet`},progress:`{{percent}}% complete`,timeRemaining:`{{time}} remaining`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,maintenanceOk:`Maintenance OK`,maintenanceWarning:`{{count}} warning`,maintenanceWarning_plural:`{{count}} warnings`,maintenanceDue:`{{count}} due`,maintenanceDue_plural:`{{count}} due`,sort:{name:`Name`,status:`Status`,model:`Model`,location:`Location`,eta:`ETA`,ascending:`Sort ascending`,descending:`Sort descending`},cardSize:{small:`Small cards`,medium:`Medium cards`,large:`Large cards`,extraLarge:`Extra large cards`},hideOffline:`Hide offline`,nextAvailable:`Next available`,powerOn:`Power On`,offlinePrintersWithPlugs:`Offline printers with smart plugs`,noPrintersConfigured:`No printers configured yet`,search:`Search printers...`,noSearchResults:`No printers match your search or filters`,filter:{allStatuses:`All statuses`,allLocations:`All locations`},toolbar:{filters:`Filters`,view:`View`,actions:`Actions`},readyToPrint:`Ready to print`,external:`External`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Delete print archives`,noLabel:`No label`,printPreview:`Print preview`,width:`Width`,height:`Height`,noObjectsFound:`No objects found`,objectsLoadedOnPrintStart:`Objects are loaded when a print starts`,willBeSkipped:`Will be skipped`,name:`Name`,serialCannotBeChanged:`Serial number cannot be changed`,locationHelp:`Used to group printers and filter queue jobs`,wifiSignal:{veryWeak:`Very weak`,weak:`Weak`,fair:`Fair`,good:`Good`,excellent:`Excellent`},maintenanceUpToDate:`All maintenance up to date - Click to view`,maintenance:{title:`In Maintenance`,subtitle:`This printer is paused — not connected, not eligible for the queue, not sending notifications.`,pillLabel:`Maintenance`,exitButton:`Exit maintenance`,menuEnter:`Enter maintenance mode`,menuExit:`Exit maintenance mode`,toastEntered:`{{name}} is now in maintenance mode`,toastExited:`{{name}} is back online`,confirmMidPrintTitle:`Enter maintenance mode mid-print?`,confirmMidPrintMessage:`{{name}} is currently printing. Entering maintenance mode will disconnect MQTT and stop progress tracking and completion notifications for this job. Continue?`,editFieldLabel:`Maintenance mode`,editFieldHelp:`When on, this printer is paused from MQTT, queue dispatch and notifications — useful for repair, parallel Bambuddy installs, or temporary suspension.`},chamberLightOn:`Turn on chamber light`,chamberLightOff:`Turn off chamber light`,files:`Files`,browseFiles:`Browse printer files`,autoOffAfterPrint:`Auto power-off after print`,autoOffExecuted:`Auto-off was executed - turn printer on to reset`,hmsErrors:`HMS Errors`,viewHmsErrors:`View {{count}} HMS error(s)`,resume:`Resume`,pause:`Pause`,stop:`Stop`,camera:`Camera`,skipObject:`Skip Object`,reconnect:`Reconnect`,forceRefresh:`Force Refresh`,forceRefreshSuccess:`Refresh requested`,mqttDebug:`MQTT Debug`,printerInformation:`Printer Information`,copyToClipboard:`Copy`,copied:`Copied!`,state:`State`,wifiSignalLabel:`WiFi Signal`,developerMode:`Developer Mode`,enabled:`Enabled`,disabled:`Disabled`,addedOn:`Added`,sdCard:`SD Card`,inserted:`Inserted`,notInserted:`Not inserted`,totalPrintHours:`Print Hours`,activeNozzle:`Active: {{nozzle}} nozzle`,nozzleRack:`Nozzle Rack`,nozzleDocked:`Docked`,nozzleMounted:`Mounted`,nozzleActive:`Active`,nozzleIdle:`Idle`,nozzleDiameter:`Diameter`,nozzleType:`Type`,nozzleStatus:`Status`,nozzleFilament:`Filament`,nozzleWear:`Wear`,nozzleMaxTemp:`Max Temp`,nozzleSerial:`Serial`,nozzleHardenedSteel:`Hardened Steel`,nozzleStainlessSteel:`Stainless Steel`,nozzleTungstenCarbide:`Tungsten Carbide`,nozzleFlow:`Flow`,nozzleHighFlow:`High Flow`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Firmware Update`,firmwareInstructions:`On the printer's touchscreen, go to`,firmwareNav:`Navigate to`,settings:`Settings`,firmware:`Firmware`,discoverPrinters:`Discover Printers`,searching:`Searching...`,manualEntry:`Manual Entry`,addFromCloud:`Add from Cloud`,toast:{printerDeleted:`Printer deleted`,missingSpoolAssignment:`Print started on {{printer}}. Missing spool assignment for: {{slots}}`,printerAdded:`Printer added`,printerUpdated:`Printer updated`,failedToDelete:`Failed to delete printer`,failedToAdd:`Failed to add printer`,connectionFailedNotAdded:`Could not connect to the printer. Verify the IP, serial number, and access code, and confirm LAN-only mode is on. The printer was not added.`,failedToUpdate:`Failed to update printer`,commandSent:`Command sent`,failedToSendCommand:`Failed to send command`,turnedOn:`{{name}} turned on`,failedToPowerOn:`Failed to power on {{name}}`,scriptTriggered:`Script triggered`,printStopped:`Print stopped`,printPaused:`Print paused`,printResumed:`Print resumed`,referenceDeleted:`Reference deleted`,detectionAreaSaved:`Detection area saved`,failedToRunScript:`Failed to run script`,failedToStopPrint:`Failed to stop print`,failedToPausePrint:`Failed to pause print`,failedToResumePrint:`Failed to resume print`,failedToControlChamberLight:`Failed to control chamber light`,failedToSetSpeed:`Failed to set print speed`,failedToUpdateSetting:`Failed to update setting`,failedToSkipObjects:`Failed to skip objects`,failedToRereadRfid:`Failed to re-read RFID`,failedToCheckPlate:`Failed to check plate`,failedToUpdateLabel:`Failed to update label`,failedToDeleteReference:`Failed to delete reference`,failedToSaveDetectionArea:`Failed to save detection area`,plateCheckEnabled:`Plate check enabled`,plateCheckDisabled:`Plate check disabled`,calibrationSaved:`Calibration saved!`,calibrationFailed:`Calibration failed`,rfidRereadInitiated:`RFID re-read initiated`,loadInitiated:`Loading filament…`,unloadInitiated:`Unloading filament…`,failedToLoad:`Failed to load filament`,failedToUnload:`Failed to unload filament`},connection:{connected:`Connected`,offline:`Offline`},plateStatus:{markCleared:`Mark plate as cleared`,cleared:`Plate Clear`,notCleared:`Plate not Clear`,inUse:`Plate in Use`},queue:{inQueue:`{{count}} print in queue`,inQueue_plural:`{{count}} prints in queue`},controls:`Controls`,rfid:{reread:`Re-read RFID`},ams:{load:`Load`,unload:`Unload`},bedJog:{title:`Jog Controls`,bed:`Bed`,step:`Step (mm)`,up:`Move plate up`,down:`Move plate down`,disabledWhilePrinting:`Disabled while printing`,notHomedTitle:`Printer is not homed`,notHomedMessage:`The printer has not been homed since the last print. Run auto-home first for safe positioning (parks the toolhead, then homes X, Y, and Z), or move anyway — soft endstops will be bypassed.`,homeZ:`Auto Home`,moveAnyway:`Move anyway`,homingStarted:`Auto-homing printer…`},permission:{noAdd:`You do not have permission to add printers`,noEdit:`You do not have permission to edit printers`,noDelete:`You do not have permission to delete printers`,noControl:`You do not have permission to control printers`,noFiles:`You do not have permission to access printer files`,noAmsRfid:`You do not have permission to re-read AMS RFID`,noSmartPlugControl:`You do not have permission to control smart plugs`,noCamera:`You do not have permission to view cameras`},modal:{addTitle:`Add Printer`,editTitle:`Edit Printer`,myPrinter:`My Printer`,selectModel:`Select model...`,locationGroup:`Location / Group (optional)`,locationPlaceholder:`e.g., Workshop, Office, Basement`,autoArchiveLabel:`Auto-archive completed prints`,fromPrinterSettings:`From printer settings`,modelOptional:`Model (optional)`,saveChanges:`Save Changes`},skipObjects:{tooltip:`Skip objects`,onlyWhilePrinting:`Skip objects (only while printing)`,requiresMultiple:`Skip objects (requires 2+ objects)`,title:`Skip Objects`,matchIdsInfo:`Match IDs with your printer display`,printerShowsIds:`The printer screen shows object IDs on the build plate`,skipSelected:`Skip Selected`,skipping:`Skipping...`,noObjectsSelected:`No objects selected`,selectObjectsToSkip:`Select objects you want to skip from the current print`,skipped:`skipped`,objectsSkipped:`Objects skipped`,activeCount:`{{count}} active`,waitForLayer:`Wait for layer 2+ to skip objects (currently layer {{layer}})`,skip:`Skip`,confirmTitle:`Skip Object?`,confirmMessage:`Are you sure you want to skip "{{name}}"? This cannot be undone.`},confirm:{deleteTitle:`Delete Printer`,deleteMessage:`Are you sure you want to delete "{{name}}"? This will remove all connection settings.`,deleteArchivesNote:`All print history for this printer will be permanently deleted.`,keepArchivesNote:`Print history will be kept but no longer associated with this printer.`,stopTitle:`Stop Print`,stopMessage:`Are you sure you want to stop the current print on "{{name}}"? This will cancel the print job.`,stopButton:`Stop Print`,pauseTitle:`Pause Print`,pauseMessage:`Are you sure you want to pause the current print on "{{name}}"?`,pauseButton:`Pause Print`,resumeTitle:`Resume Print`,resumeMessage:`Are you sure you want to resume the print on "{{name}}"?`,resumeButton:`Resume Print`,powerOnTitle:`Power On Printer`,powerOnMessage:`Are you sure you want to turn ON the power for "{{name}}"?`,powerOnButton:`Power On`,powerOffTitle:`Power Off Printer`,powerOffMessage:`Are you sure you want to turn OFF the power for "{{name}}"?`,powerOffWarning:`WARNING: "{{name}}" is currently printing! Are you sure you want to turn OFF the power? This will interrupt the print and may damage the printer.`,powerOffButton:`Power Off`,haToggleTitle:`Toggle "{{name}}"`,haToggleMessage:`Toggle the Home Assistant entity {{entity}}? This may turn power off if it is currently on.`,haToggleWarning:`WARNING: "{{name}}" is currently printing! Toggling {{entity}} may cut power and interrupt the print. Continue?`,haToggleButton:`Toggle`},bulk:{select:`Select`,selectAll:`Select All`,selectByLocation:`Select by Location`,selected:`{{count}} selected`,actions:{stop:`Stop`,pause:`Pause`,resume:`Resume`,clearPlate:`Clear Bed`,clearHMS:`Clear Notifications`},confirm:{stopTitle:`Stop {{count}} Prints`,stopMessage:`This will cancel active prints on {{count}} printer(s). This action cannot be undone.`,stopButton:`Stop All`,pauseTitle:`Pause {{count}} Prints`,pauseMessage:`This will pause active prints on {{count}} printer(s).`,pauseButton:`Pause All`,clearPlateTitle:`Clear {{count}} Print Beds`,clearPlateMessage:`This will clear the print bed on {{count}} printer(s) and may trigger queued jobs.`,clearPlateButton:`Clear All`},success:`{{action}} completed on {{count}} printer(s)`,partial:`{{succeeded}} succeeded, {{failed}} failed`,noneApplicable:`No selected printers are in the right state for this action`,selectByState:`Select by State`},discovery:{title:`Discover Printers`,searching:`Searching...`,scanning:`Scanning...`,scanProgress:`Scanning... {{scanned}}/{{total}}`,foundPrinters:`Found {{count}} printer(s)`,noPrintersFound:`No printers found`,noPrintersFoundSubnet:`No printers found in the specified subnet.`,noPrintersFoundNetwork:`No printers found on the network.`,allConfigured:`All discovered printers are already configured.`,alreadyAdded:`Already added`,select:`Select`,manualEntry:`Manual Entry`,addFromCloud:`Add from Cloud`,subnetToScan:`Subnet to scan`,dockerNote:`Docker detected. Enter your printer's subnet in CIDR notation. Requires network_mode: host in docker-compose.yml.`,scanSubnet:`Scan Subnet for Printers`,discoverNetwork:`Discover Printers on Network`,scanningSubnet:`Scanning subnet for Bambu printers...`,scanningNetwork:`Scanning network...`,serialRequired:`Serial required`,unknown:`Unknown`,failedToStart:`Failed to start discovery`,customSubnetOption:`Custom subnet...`,customSubnetLabel:`Custom subnet (CIDR)`,customSubnetNote:`Use a custom subnet if your printer is on a different network than this server. The FTP (990) and MQTT (8883) ports must be reachable across the routing boundary.`},drying:{start:`Start Drying`,stop:`Stop Drying`,temperature:`Temperature`,duration:`Duration`,hours:`hours`,timeRemaining:`{{time}} left`,active:`Drying`,notSupported:`Drying not supported`,powerRequired:`Connect AMS power adapter to enable drying`,startingDrying:`Starting drying...`,stoppingDrying:`Stopping drying...`,rotateTray:`Rotate spool during drying`},amsBackup:{titleOn:`AMS Filament Backup is ON. Click to disable.`,titleOff:`AMS Filament Backup is OFF. Click to enable.`,titleUnknown:`AMS Filament Backup status unavailable on this printer.`,toastEnabled:`AMS Filament Backup enabled`,toastDisabled:`AMS Filament Backup disabled`,modalTitle:`AMS Filament Backup`,modalHelp:`When the active slot runs out, the printer cycles through any matching same-preset, same-colour slots in this order.`,modalNoSlots:`No filament loaded.`,modalNoPairs:`No backup pairs — no two slots share the same filament profile and colour.`,extruderRightShort:`R`,extruderLeftShort:`L`,stateOn:`Enabled`,stateOff:`Disabled`,stateUnknown:`Unsupported on this printer`},activeJobSlot:{title:`This slot is filament {{n}} in the active print`,ariaLabel:`Active print slot {{n}}`},filaments:`Filaments`,openCameraOverlay:`Open camera overlay`,openCameraWindow:`Open camera in new window`,firmwareUpdateAvailable:`Firmware update available: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Up to date`,firmwareUpdateButton:`Update`,plateDetection:{noPermission:`You do not have permission to update printers`,enabledClick:`Plate check enabled - Click to disable`,disabledClick:`Plate check disabled - Click to enable`,manageCalibration:`Manage plate detection calibration`,calibrationRequired:`Calibration Required`,calibrationInstructions:`Please ensure the build plate is completely empty, then click Calibrate.`,calibrationDescription:`Calibration captures a reference image of the empty plate. Future checks will compare against this reference to detect objects.`,calibrationTip:`Tip: You can store up to 5 calibrations for different plates. The system automatically uses the best match when checking.`,plateEmpty:`Plate appears empty`,objectsDetected:`Objects detected on plate`,confidence:`Confidence`,difference:`Difference`,analysisPreview:`Analysis preview:`,analysisLegend:`Green box = detection area, Red overlay = differences from calibration`,savedReferences:`Saved References ({{count}}/{{max}})`,deleteReference:`Delete reference`,labelPlaceholder:`Label...`,clickToEdit:`{{label}} - Click to edit`,clickToAddLabel:`Click to add label`},speed:{title:`Print Speed`,silent:`Silent (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Airduct Mode`,cooling:`Cooling`,heating:`Heating`},noSdCard:`No SD`,door:{open:`Open`,closed:`Closed`},fans:{partCooling:`Part Cooling Fan`,auxiliary:`Auxiliary Fan`,chamber:`Chamber Fan`},clickToViewHmsErrors:`Click to view HMS errors`,estimatedCompletion:`Estimated completion time`,plateNumber:`Plate {{number}}`,slotOptions:`Slot options`,amsPopup:{friendlyName:`AMS Name`,friendlyNamePlaceholder:`e.g. AMS Friendly Name`,serialNumber:`Serial Number`,firmwareVersion:`Firmware`,save:`Save`,clear:`Clear`,noEditPermission:`You do not have permission to rename AMS units`},firmwareModal:{title:`Firmware Update`,titleUpToDate:`Firmware Info`,currentVersion:`Current:`,latestVersion:`Latest:`,releaseNotes:`Release Notes`,checkingPrereqs:`Checking prerequisites...`,sdCardReady:`SD card ready. Click below to upload firmware.`,uploadedSuccess:`Firmware uploaded to SD card!`,applyInstructions:`To apply the update on your printer:`,step1:`On the printer's touchscreen, go to Settings`,step2:`Navigate to Firmware`,step3:`Select Update from SD card`,step4:`The update will take 10-20 minutes`,done:`Done`,starting:`Starting...`,uploadFirmware:`Upload Firmware`,uploadFailed:`Failed to start upload: {{error}}`,uploadedToast:`Firmware uploaded! Trigger update from printer screen.`,availableVersions:`Available versions`,usable:`Usable`,unavailable:`Unavailable`,installed:`Installed`,newerBadge:`newer`,olderBadge:`older`,currentBadge:`current`},accessCodePlaceholder:`Leave empty to keep current`,roi:{title:`Detection Area (ROI)`,xStart:`X Start`,yStart:`Y Start`,width:`Width`,height:`Height`,instruction:`Adjust the detection area to focus on the build plate. The green box in the preview shows the current area.`},developerModeWarning:`Developer LAN mode is not enabled on: {{names}}. Some features may not work.`,howToEnable:`How to enable`,incompatibleFile:`This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}`,dropNotPrintable:`Only .gcode and .gcode.3mf files can be printed`,dropToPrint:`Drop to print`,cannotPrint:`Printer busy`},archives:{title:`Print Archives`,no3mfBanner:{title:`Some recent prints couldn't be archived with thumbnails`,body:`The slicer didn't leave the .gcode.3mf on the printer's SD card, so Bambuddy couldn't pull the thumbnail or slicer metadata. This is usually because "Store sent files on external storage" is off in the slicer (Bambu Studio / OrcaSlicer Device tab).`,docsLink:`See install step 4`,dismissLabel:`Dismiss this notice`},searchPlaceholder:`Search archives...`,filterByPrinter:`Filter by printer`,filterByStatus:`Filter by status`,sortBy:`Sort by`,sortNewest:`Newest first`,sortOldest:`Oldest first`,sortName:`Name`,sortDuration:`Duration`,sortLargest:`Largest first`,sortSmallest:`Smallest first`,sortSize:`Size`,noArchives:`No archives found`,noArchivesSearch:`No archives match your search`,originalPrintNotVisible:`Original print not visible - try clearing filters`,noArchivesYet:`No archives yet`,prints:`prints`,pagination:{showing:`Showing`,to:`to`,of:`of`,show:`Show`,page:`Page`,all:`All`},loadingArchives:`Loading archives...`,releaseToUpload:`Release to upload`,showAll:`Show all`,showFavoritesOnly:`Show favorites only`,gridView:`Grid view`,listView:`List view`,calendarView:`Calendar view`,logView:`Print Log`,manageTags:`Manage Tags`,showFailedPrints:`Show failed prints`,hideFailedPrints:`Hide failed prints`,hideDuplicates:`Hide Duplicates`,viewOriginalPrint:`Click to view original print (#{{id}})`,printTime:`Print Time`,filamentUsed:`Filament Used`,cost:`Cost`,reprint:`Reprint`,preview:`Preview`,deleteArchive:`Delete Archive`,deleteConfirm:`Are you sure you want to delete this archive?`,favorite:`Favorite`,unfavorite:`Remove from favorites`,viewDetails:`View Details`,status:{completed:`Completed`,failed:`Failed`,stopped:`Stopped`},toast:{source3mfAttached:`Source 3MF attached: {{filename}}`,failedUploadSource3mf:`Failed to upload source 3MF`,source3mfRemoved:`Source 3MF removed`,failedRemoveSource3mf:`Failed to remove source 3MF`,f3dAttached:`F3D attached: {{filename}}`,failedUploadF3d:`Failed to upload F3D`,f3dRemoved:`F3D removed`,failedRemoveF3d:`Failed to remove F3D`,timelapseAttached:`Timelapse attached: {{filename}}`,timelapseAlreadyAttached:`Timelapse already attached`,noMatchingTimelapse:`No matching timelapse found`,failedScanTimelapse:`Failed to scan for timelapse`,failedAttachTimelapse:`Failed to attach timelapse`,timelapseRemoved:`Timelapse removed`,failedRemoveTimelapse:`Failed to remove timelapse`,timelapseUploaded:`Timelapse uploaded: {{filename}}`,failedUploadTimelapse:`Failed to upload timelapse`,archiveDeleted:`Archive deleted`,failedDeleteArchive:`Failed to delete archive`,addedToFavorites:`Added to favorites`,removedFromFavorites:`Removed from favorites`,projectUpdated:`Project updated`,failedUpdateProject:`Failed to update project`,linkCopied:`Link copied to clipboard`,failedCopyLink:`Failed to copy link`,photoDeleted:`Photo deleted`,failedDeletePhoto:`Failed to delete photo`,failedDeleteArchives:`Failed to delete archives`,failedUpdateFavorites:`Failed to update favorites`,exportDownloaded:`Export downloaded`,exportFailed:`Export failed`},menu:{print:`Print`,schedule:`Schedule`,openInBambuStudio:`Open in Slicer`,slice:`Slice`,externalLink:`External Link`,viewOnMakerWorld:`View on MakerWorld`,preview3d:`3D Preview`,viewTimelapse:`View Timelapse`,scanForTimelapse:`Scan for Timelapse`,uploadTimelapse:`Upload Timelapse`,removeTimelapse:`Remove Timelapse`,downloadSource3mf:`Download Source 3MF`,uploadSource3mf:`Upload Source 3MF`,replaceSource3mf:`Replace Source 3MF`,removeSource3mf:`Remove Source 3MF`,uploadF3d:`Upload F3D`,replaceF3d:`Replace F3D`,downloadF3d:`Download F3D`,removeF3d:`Remove F3D`,download:`Download`,copyDownloadLink:`Copy Download Link`,qrCode:`QR Code`,viewPhotos:`View Photos`,viewPhotosCount:`View Photos ({{count}})`,projectPage:`Project Page`,addToFavorites:`Add to Favorites`,removeFromFavorites:`Remove from Favorites`,edit:`Edit`,printLog:`Print Log`,goToProject:`Go to Project: {{name}}`,addToProject:`Add to Project`,removeFromProject:`Remove from Project`,loading:`Loading...`,noProjectsAvailable:`No projects available`,searchProjects:`Search projects…`,select:`Select`,deselect:`Deselect`,delete:`Delete`},permission:{noReprint:`You do not have permission to reprint this archive`,noAddToQueue:`You do not have permission to add to queue`,noUpdateArchives:`You do not have permission to update archives`,noUploadFiles:`You do not have permission to upload files`,noDownload:`You do not have permission to download archives`,noCopyLink:`You do not have permission to copy download links`,noDelete:`You do not have permission to delete this archive`,noEdit:`You do not have permission to edit this entry`,noCreate:`You do not have permission to create archives`},platePicker:{title:`Select plate to preview`,hint:`This archive has multiple plates. Pick one to open in the GCode viewer.`,plateLabel:`Plate {{index}}`,objectCount:`{{count}} object`,objectCount_plural:`{{count}} objects`,noGcode:`This archive has no sliced G-code to preview. Open it in Bambu Studio to slice first.`},card:{previousPlate:`Previous plate`,nextPlate:`Next plate`,plateNumber:`Plate {{index}}`,moreOptions:`Right-click for more options`,addToFavorites:`Add to favorites`,removeFromFavorites:`Remove from favorites`,cancelled:`cancelled`,failed:`failed`,duplicate:`duplicate`,duplicateTitle:`This model has been printed before`,openSource3mf:`Open source 3MF in Bambu Studio (right-click for more options)`,downloadF3d:`Download Fusion 360 design file`,viewTimelapse:`View timelapse`,viewPhoto:`View 1 photo`,viewPhotos:`View {{count}} photos`,openFolder:`Open folder: {{name}}`,slicedFile:`Sliced file - ready to print`,sourceFile:`Source file only - no AMS mapping available`,gcode:`GCODE`,source:`SOURCE`,project:`Project: {{name}}`,runsBadge:`{{count}} prints`,runsBadgeTitle:`{{count}} prints total — {{successful}} successful, {{failed}} failed. Click to see the full print log.`,estimated:`Estimated: {{time}}`,actual:`Actual: {{time}}`,accuracy:`Accuracy: {{percent}}%`,filament:`{{weight}}g`,layer:`{{count}} layer`,layers:`{{count}} layers`,object:`{{count}} object`,objects:`{{count}} objects`,slicedFor:`Sliced for {{model}}`,uploadedBy:`Uploaded By`,noPermissionReprint:`You do not have permission to reprint`,noFileForReprint:`No 3MF file available — the file could not be downloaded from the printer when the print was recorded`,noPermissionEdit:`You do not have permission to edit archives`,noPermissionDelete:`You do not have permission to delete archives`,reprint:`Reprint`,schedulePrint:`Schedule Print`,schedule:`Schedule`,openInBambuStudio:`Open in Slicer`,openInBambuStudioToSlice:`Open in Slicer to slice`,slice:`Slice`,externalLink:`External Link`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`View project`,noExternalLink:`No external link`,preview3d:`3D Preview`,download:`Download`,edit:`Edit`,delete:`Delete`},runLog:{title:`Print Log`,modalTitle:`Print Log — {{name}}`,modalTitleFallback:`this archive`,empty:`No print events recorded for this archive yet.`,col:{date:`Date`,status:`Status`,duration:`Duration`,filament:`Filament`,cost:`Cost`},status:{completed:`Completed`,failed:`Failed`,cancelled:`Cancelled`,stopped:`Stopped`,skipped:`Skipped`,printing:`Printing`}},modal:{deleteArchive:`Delete Archive`,deleteConfirm:`Are you sure you want to delete "{{name}}"? This action cannot be undone.`,deleteButton:`Delete`,deletePurgeStats:`Also remove this print from Quick Stats (filament, time, cost, energy)`,deleteQueueItemsWarning:`{{count}} queue item(s) linked to this archive will also be removed.`,deleteBlockedByPrinting:`Cannot delete — {{count}} queue item(s) are currently printing. Stop the print first, then retry.`,removeSource3mf:`Remove Source 3MF`,removeSource3mfConfirm:`Are you sure you want to remove the source 3MF file from "{{name}}"? This will delete the original slicer project file.`,removeButton:`Remove`,removeF3d:`Remove F3D`,removeF3dConfirm:`Are you sure you want to remove the Fusion 360 design file from "{{name}}"?`,removeTimelapse:`Remove Timelapse`,removeTimelapseConfirm:`Are you sure you want to remove the timelapse video from "{{name}}"?`,timelapse:`{{name}} - Timelapse`,selectTimelapse:`Select Timelapse`,selectTimelapseDesc:`No auto-match found. Select the timelapse for this print:`,deleteArchives:`Delete Archives`,deleteArchivesConfirm:`Are you sure you want to delete {{count}} archive(s)? This action cannot be undone.`,deleteCount:`Delete {{count}}`},page:{title:`Archives`,printsCount:`{{filtered}} of {{total}} prints`,dropFilesHere:`Drop .3mf files here`,releaseToUpload:`Release to upload`,only3mfSupported:`Only .3mf files are supported`,close:`Close`,selected:`{{count}} selected`,selectAll:`Select All`,tags:`Tags`,project:`Project`,favorite:`Favorite`,delete:`Delete`,toggledFavorites:`Toggled favorites for {{count}} archive(s)`,failedUpdateFavorites:`Failed to update favorites`,archivesDeleted:`{{count}} archive(s) deleted`,failedDeleteArchives:`Failed to delete archives`,photoDeleted:`Photo deleted`,failedDeletePhoto:`Failed to delete photo`},list:{name:`Name`,printer:`Printer`,date:`Date`,size:`Size`,actions:`Actions`,hasTimelapse:`Has timelapse`},log:{date:`Date`,printName:`Print Name`,printer:`Printer`,user:`User`,status:`Status`,duration:`Duration`,filament:`Filament`,allPrinters:`All Printers`,allUsers:`All Users`,allStatuses:`All Statuses`,cancelled:`Cancelled`,skipped:`Skipped`,dateFrom:`From`,dateTo:`To`,noEntries:`No print log entries found`,showing:`Showing {{count}} of {{total}} entries`,rowsPerPage:`Rows`,page:`Page`,prev:`Prev`,next:`Next`,clearLog:`Clear Log`,clearLogTitle:`Clear Print Log`,clearLogConfirm:`All print log entries will be permanently deleted. Archives and queue items are not affected. This action cannot be undone. Are you sure?`,clearLogButton:`Clear All`,cleared:`{{count}} log entries cleared`,clearFailed:`Failed to clear print log`,deleteEntryTitle:`Delete print log entry`,deleteEntryConfirm:`This entry will be removed from the log and its filament, time, and cost contributions will drop out of Quick Stats. The matching archive (if any) is not affected. This action cannot be undone.`,entryDeleted:`Print log entry deleted`,entryDeleteFailed:`Failed to delete print log entry`,editEntryTitle:`Edit print log entry`,editEntryDescription:`Classify this print run. The Failure Analysis widget groups by these values, so updates flow through to stats immediately.`,entryUpdated:`Print log entry updated`,entryUpdateFailed:`Failed to update print log entry`,statuses:{completed:`Completed`,failed:`Failed`,stopped:`Stopped`,cancelled:`Cancelled`,skipped:`Skipped`}}},queue:{title:`Print Queue`,subtitle:`Schedule and manage your print jobs`,addToQueue:`Add to Queue`,filamentShort:{rowBadge:`Insufficient filament for the assigned spool`,rowTooltip:`The dispatch scheduler flagged this item. Click Play to see the per-slot deficit and decide whether to print anyway.`,confirmTitle:`Insufficient filament`,confirmIntro:`The assigned spool cannot satisfy at least one slot. Print anyway?`,lineItem:`Slot {{slot}}: needs {{required}} g, {{remaining}} g remaining`,unknown:`unknown`,printAnyway:`Print Anyway`},print:`Print`,reprint:`Re-print`,schedulePrint:`Schedule Print`,editQueueItem:`Edit Queue Item`,printToPrinters:`Print to {{count}} Printers`,queueToPrinters:`Queue to {{count}} Printers`,queueSelectedPlates:`Queue {{count}} Plates`,selectAllPlates:`Select All {{count}} Plates`,deselectAll:`Deselect All`,printQueued:`Print queued`,itemsQueued:`{{count}} items queued`,sending:`Sending...`,sendingProgress:`Sending {{current}}/{{total}}...`,adding:`Adding...`,addingProgress:`Adding {{current}}/{{total}}...`,savingProgress:`Saving {{current}}/{{total}}...`,clearQueue:`Clear Queue`,clearHistory:`Clear History`,emptyQueue:`Queue is empty`,position:`Position`,scheduledTime:`Scheduled Time`,moveUp:`Move Up`,moveDown:`Move Down`,startNow:`Start Now`,printingInProgress:`Printing in progress...`,viewArchive:`View archive`,viewInFileManager:`View in File Manager`,itemCount:`{{count}} item`,itemCount_plural:`{{count}} items`,dragToReorder:`Drag to reorder (ASAP only)`,reorderHint:`Position only affects ASAP items. Scheduled items run at their set time.`,sjf:{label:`SJF`,tooltip:`Shortest Job First — scheduler prioritizes shorter prints`},addedBy:`Added by {{name}}`,nextInQueue:`Next in queue`,clearPlateSuccess:`Plate cleared — ready for next print`,plateNumber:`Plate {{index}}`,quantity:`Quantity`,quantityHint:`Creates {{count}} queue items`,activeBatches:`Active Batches`,batchProgress:`{{completed}} of {{total}} completed`,cancelBatch:`Cancel Remaining`,batchCancelled:`Remaining batch items cancelled`,cancelBatchConfirmTitle:`Cancel Batch`,cancelBatchConfirmMessage:`Cancel all remaining pending items in this batch?`,batch:{defaultName:`Batch`,label:`{{count}} item`,label_plural:`{{count}} items`,pendingCount:`{{count}} pending`,pendingCount_plural:`{{count}} pending`,expand:`Expand batch`,collapse:`Collapse batch`,groupAsBatch:`Group as batch…`,groupAsBatchDescription:`Combine the {{count}} selected items into a single collapsible batch.`,nameLabel:`Batch name`,namePlaceholder:`e.g. Friday gifts`,create:`Create batch`,ungroup:`Ungroup`,ungroupConfirmTitle:`Ungroup batch?`,ungroupConfirmMessage:`The items will stay in the queue but no longer be grouped together.`,dragGroup:`Drag group`},tabs:{queue:`Queue`,history:`History`,timeline:`Timeline`},layout:{flatList:`List`,byPrinter:`By Printer`,groupByPrinter:`Group by Printer`},history:{emptyTitle:`No history yet`,emptyDescription:`Completed, cancelled, and failed prints will appear here.`},dragGhost:{multiCount:`{{count}} items`,batch:`{{name}} ({{count}} copy)`,batch_plural:`{{name}} ({{count}} copies)`},sections:{currentlyPrinting:`Currently Printing`,queued:`Queued`,history:`History`},status:{pending:`Pending`,waiting:`Waiting`,printing:`Printing`,paused:`Paused`,completed:`Completed`,failed:`Failed`,skipped:`Skipped`,cancelled:`Cancelled`},summary:{printing:`Printing`,queued:`Queued`,totalTime:`Total Queue Time`,totalWeight:`Total Queue Weight`,history:`History`},filter:{allPrinters:`All Printers`,unassigned:`Unassigned`,allStatus:`All Status`,allLocations:`All Locations`,any:`Any`},sort:{byPosition:`Sort by Position`,byName:`Sort by Name`,byPrinter:`Sort by Printer`,bySchedule:`Sort by Schedule`,byDate:`Sort by Date`,ascendingOldest:`Ascending (oldest first)`,descendingNewest:`Descending (newest first)`},badges:{staged:`Staged`,requiresPrevious:`Requires previous success`,autoPowerOff:`Auto power off`,gcodeInjection:`G-code`},empty:{title:`No prints scheduled`,description:`Schedule a print from the Archives page using the "Schedule" option in the context menu, or drag and drop files to get started.`},time:{asap:`ASAP`,overdue:`Overdue`,now:`Now`,lessThanMinute:`In less than a minute`,inMinutes:`In {{count}} min`,inHours:`In {{count}} hours`},actions:{stopPrint:`Stop Print`,startPrint:`Start Print`,requeue:`Re-queue`},bulkEdit:{title:`Edit {{count}} Item`,title_plural:`Edit {{count}} Items`,description:`Only changed settings will be applied to selected items.`,printer:`Printer`,noChange:`— No change —`,queueOptions:`Queue Options`,staged:`Staged (manual start)`,autoPowerOff:`Auto power off after print`,requirePrevious:`Require previous success`,printOptions:`Print Options`,bedLevelling:`Bed levelling`,flowCalibration:`Flow calibration`,vibrationCalibration:`Vibration calibration`,layerInspection:`First layer inspection`,timelapse:`Timelapse`,useAms:`Use AMS`,nozzleOffsetCali:`Nozzle offset calibration`,applyChanges:`Apply Changes`,selectAll:`Select All`,deselectAll:`Deselect All`,selected:`{{count}} selected`,editSelected:`Edit Selected`,cancelSelected:`Cancel Selected`},confirm:{cancelTitle:`Cancel Scheduled Print`,cancelMessage:`Are you sure you want to cancel "{{name}}"?`,stopTitle:`Stop Print`,stopMessage:`Are you sure you want to stop the current print "{{name}}"? This will cancel the print job on the printer.`,removeTitle:`Remove from History`,removeMessage:`Are you sure you want to remove "{{name}}" from the queue history?`,clearHistoryTitle:`Clear History`,clearHistoryMessage:`Are you sure you want to remove all {{count}} item(s) from the history?`,cancelButton:`Cancel Print`,stopButton:`Stop Print`,thisPrint:`this print`,thisItem:`this item`},toast:{cancelled:`Queue item cancelled`,cancelFailed:`Failed to cancel item`,removed:`Queue item removed`,removeFailed:`Failed to remove item`,stopped:`Print stopped`,stopFailed:`Failed to stop print`,released:`Print released to queue`,startFailed:`Failed to start print`,reorderFailed:`Failed to reorder queue`,historyCleared:`Cleared {{count}} history item(s)`,clearHistoryFailed:`Failed to clear history`,updateFailed:`Failed to update items`,bulkCancelled:`Cancelled {{count}} item(s)`,bulkCancelFailed:`Failed to cancel items`,batchCreated:`Batch "{{name}}" created`,batchCreateFailed:`Failed to create batch`,batchUngrouped:`Ungrouped {{count}} item(s)`,batchUngroupFailed:`Failed to ungroup batch`},timeline:{listView:`List`,timelineView:`Timeline`,unassigned:`Unassigned`,noData:`No scheduled prints for this day`,nothingCommitted:`No committed schedules in this window. Staged items, waiting items, and ASAP jobs on idle printers are not shown — set a scheduled time or release a staged item to see it here.`,allDoneBy:`All prints estimated done by {{time}}`,staged:`Staged`,filterAll:`Show All`,filterPrinting:`Printing`,filterQueued:`Queued`,time:{anyMoment:`any moment`,minutesLeft:`{{minutes}}m left`,hoursLeft:`{{hours}}h left`,hoursMinutesLeft:`{{hours}}h {{minutes}}m left`},day:{previous:`Previous day`,next:`Next day`,today:`Today`},window:{back12h:`Back 12 hours`,forward12h:`Forward 12 hours`,now:`Now`},printerColumnHeader:`Printer`},permissions:{noStopPrint:`You do not have permission to stop prints`,noStartPrint:`You do not have permission to start prints`,noEdit:`You do not have permission to edit this queue item`,noCancel:`You do not have permission to cancel this queue item`,noRequeue:`You do not have permission to re-queue items`,noRemove:`You do not have permission to remove this queue item`,noClearHistory:`You do not have permission to clear all history`,noEditItems:`You do not have permission to edit queue items`,noCancelItems:`You do not have permission to cancel queue items`}},backgroundDispatch:{unknownFile:`Unknown file`,unknownPrinter:`Unknown printer`,startingPrints:`Starting prints`,progressSummary:`{{complete}}/{{total}} complete • Dispatched: {{dispatched}} • Processing: {{processing}}`,expandDetails:`Expand dispatch details`,collapseDetails:`Collapse dispatch details`,dismissToast:`Dismiss dispatch toast`,cancelDispatchJob:`Cancel dispatch job`,cancel:`Cancel`,cancelling:`Cancelling…`,awaitingPrinter:`Awaiting printer…`,status:{dispatched:`Dispatched`,processing:`Processing`,completed:`Completed`,failed:`Failed`,cancelled:`Cancelled`},toast:{cancellingUpload:`Cancelling upload...`,cancelled:`Dispatch cancelled`,cancelFailed:`Failed to cancel dispatch`,completeWithFailures:`Background dispatch complete: {{completed}} succeeded, {{failed}} failed`,completeSuccess:`Background dispatch complete: {{completed}} succeeded`,printStartedRemaining:`{{completed}} print(s) started, {{remaining}} more sending...`}},stats:{title:`Statistics`,subtitle:`Drag widgets to rearrange. Click the eye icon to hide.`,overview:`Overview`,totalPrints:`Total Prints`,successRate:`Success Rate`,totalPrintTime:`Total Print Time`,printTime:`Print Time`,totalFilament:`Total Filament Used`,filamentUsed:`Filament Used`,filamentCost:`Filament Cost`,totalCost:`Total Cost`,energyUsed:`Energy Used`,energyCost:`Energy Cost`,energyWarmingUpTooltip:`Energy tracking is still collecting hourly snapshots. Date-range totals will become accurate once at least one snapshot exists before the selected range. Early values may undercount.`,averagePrintTime:`Average Print Time`,printsPerDay:`Prints per Day`,byPrinter:`By Printer`,printsByPrinter:`Prints by Printer`,byMaterial:`By Material`,byMonth:`By Month`,last7Days:`Last 7 Days`,last30Days:`Last 30 Days`,last90Days:`Last 90 Days`,allTime:`All Time`,quickStats:`Quick Stats`,printActivity:`Print Activity`,filamentTypes:`Filament Types`,filamentTrends:`Filament Trends`,failureAnalysis:`Failure Analysis`,timeAccuracy:`Time Accuracy`,successful:`Successful:`,failed:`Failed:`,cancelled:`Cancelled:`,perfectEstimate:`100% = perfect estimate`,noTimeAccuracyData:`No time accuracy data yet`,noFilamentData:`No filament data available`,noPrinterData:`No printer data available`,noPrintData:`No print data available`,noPrintDataLast30Days:`No print data in the last 30 days`,failureReasons:`Failure Reasons`,topFailureReasons:`Top Failure Reasons`,failedPrintsCount:`{{failed}} / {{total}} prints failed`,lastWeekRate:`Last week: {{rate}}%`,resetLayout:`Reset Layout`,recalculateCosts:`Recalculate Costs`,recalculateCostsHint:`Recalculate all archive costs using current filament prices`,exportStats:`Export Stats`,exportAsCsv:`Export as CSV`,exportAsExcel:`Export as Excel`,hiddenCount:`{{count}} Hidden`,exportDownloaded:`Export downloaded`,exportFailed:`Export failed`,layoutReset:`Layout reset`,recalculatedCosts:`Recalculated costs for {{count}} archives`,recalculateFailed:`Failed to recalculate costs`,loadingStats:`Loading statistics...`,noPermissionResetLayout:`You do not have permission to reset layout`,noPermissionRecalculate:`You do not have permission to recalculate costs`,noPrintDataInRange:`No print data in selected range`,periodFilament:`Period Filament`,periodCost:`Period Cost`,avgPerPrint:`Avg per Print`,usageOverTime:`Usage Over Time`,filamentByWeight:`Weight`,printDuration:`Print Duration`,printerUtilization:`Printer Utilization`,filamentSuccess:`Success by Material`,printHabits:`Print Habits`,printTimeOfDay:`Print Time of Day`,colorDistribution:`Color Distribution`,noColorData:`No color data available`,records:`Records`,longestPrint:`Longest Print`,heaviestPrint:`Heaviest Print`,mostExpensivePrint:`Most Expensive`,busiestDay:`Busiest Day`,successStreak:`Success Streak`,streakPrint:`consecutive print`,streakPrints:`{{count}} consecutive prints`,printerStats:`Printer Stats`,hours:`hours`,avgPrints:`Avg. prints`,noArchiveData:`No print data available`,filamentByTime:`Time`,avgWeight:`Avg. weight`,avgTime:`Avg. time`,filamentByPrints:`Prints`,timeframe:{today:`Today`,"this-week":`This Week`,"this-month":`This Month`,"last-7":`Last 7 Days`,"last-30":`Last 30 Days`,"last-90":`Last 90 Days`,"this-year":`This Year`,"all-time":`All Time`,custom:`Custom Range`,from:`From`,to:`To`},allUsers:`All Users`,noUser:`No User (System)`,filterByUser:`Filter by User`},maintenance:{title:`Maintenance`,overview:`Overview`,allOk:`All maintenance up to date`,dueCount:`{{count}} item due`,dueCount_plural:`{{count}} items due`,warningCount:`{{count}} warning`,warningCount_plural:`{{count}} warnings`,totalPrintTime:`Total Print Time`,nextMaintenance:`Next Maintenance`,nothingDue:`Nothing due`,tasks:`Tasks`,lastPerformed:`Last performed`,interval:`Interval`,hoursRemaining:`{{hours}}h remaining`,hoursOverdue:`{{hours}}h overdue`,markDone:`Mark as Done`,performMaintenance:`Perform Maintenance`,history:`History`,noHistory:`No maintenance history`,editPrintHours:`Edit Print Hours`,currentHours:`Current Hours`,statusTab:`Status`,settingsTab:`Settings`,overdueCount:`{{count}} overdue`,dueSoonCount:`{{count}} due soon`,dueSoon:`Due soon`,allGood:`All good`,overdueBy:`Overdue by {{duration}}`,dueIn:`Due in {{duration}}`,timeLeft:`{{duration}} left`,day:`1 day`,days:`{{count}} days`,week:`1 week`,weeks:`{{count}} weeks`,month:`1 month`,months:`{{count}} months`,year:`1 year`,maintenanceTypes:`Maintenance Types`,maintenanceTypesDescription:`System types and your custom maintenance tasks`,addCustomType:`Add Custom Type`,restoreDefaults:`Restore Default Tasks`,intervalType:`Interval Type`,intervalValue:`Interval ({{type}})`,icon:`Icon`,documentationLink:`Documentation Link (optional)`,assignToPrinters:`Assign to Printers`,selectAtLeastOnePrinter:`Select at least one printer`,addType:`Add Type`,custom:`Custom`,printHours:`Print Hours`,calendarDays:`Calendar Days`,exampleName:`e.g., Replace HEPA Filter`,viewDocumentation:`View documentation`,timeBasedInterval:`Time-based interval`,intervalOverrides:`Interval Overrides`,intervalOverridesDescription:`Customize intervals for specific printers`,assignedToPrinters:`Assigned to printers:`,noPrintersAssigned:`No printers assigned`,addPrinterShort:`Add:`,printersAssignedClick:`{{count}} printer(s) assigned - click to manage`,removeFromPrinter:`Remove from this printer`,types:{lubricateCarbonRods:`Lubricate Carbon Rods`,lubricateRails:`Lubricate Linear Rails`,cleanNozzle:`Clean Nozzle/Hotend`,checkBelts:`Check Belt Tension`,cleanBuildPlate:`Clean Build Plate`,checkExtruder:`Check Extruder Gears`,checkCooling:`Check Cooling Fans`,generalInspection:`General Inspection`,cleanCarbonRods:`Clean Carbon Rods`,lubricateSteelRods:`Lubricate Steel Rods`,cleanSteelRods:`Clean Steel Rods`,cleanLinearRails:`Clean Linear Rails`,checkPtfeTube:`Check PTFE Tube`,replaceHepaFilter:`Replace HEPA Filter`,replaceCarbonFilter:`Replace Carbon Filter`,lubricateLeftNozzleRail:`Lubricate Left Nozzle Rail`},maintenanceComplete:`Maintenance marked as complete`,typeUpdated:`Maintenance type updated`,typeDeleted:`Maintenance type deleted`,defaultsRestored:`Restored {{count}} default task(s)`,printHoursUpdated:`Print hours updated`,printerAssigned:`Printer assigned`,printerRemoved:`Printer removed`,deleteTypeConfirm:`Delete "{{name}}"?`,deleteSystemTypeTitle:`Delete default maintenance task?`,deleteSystemTypeMessage:`Are you sure you want to delete the default maintenance task "{{name}}"?`,noPermissionUpdate:`You do not have permission to update maintenance items`,noPermissionPerform:`You do not have permission to perform maintenance`,noPermissionEditTypes:`You do not have permission to edit maintenance types`,noPermissionDeleteTypes:`You do not have permission to delete maintenance types`,noPermissionEditHours:`You do not have permission to edit print hours`,noPermissionRemovePrinter:`You do not have permission to remove printer assignments`,noPermissionAssignPrinter:`You do not have permission to assign printers`,noPermissionEditIntervals:`You do not have permission to edit intervals`,configureSettings:`Configure maintenance types and intervals`},settings:{title:`Settings`,general:`General`,tabs:{general:`General`,smartPlugs:`Smart Plugs`,notifications:`Notifications`,queue:`Workflow`,filament:`Filament`,network:`Network`,apiKeys:`API Keys`,virtualPrinter:`Virtual Printer`,spoolbuddy:`SpoolBuddy`,failureDetection:`Failure Detection`,users:`Authentication`,backup:`Backup`,emailAuth:`Email Authentication`,ldap:`LDAP`,twoFa:`Two-Factor Auth`,oidc:`SSO / OIDC`,security:`Security`},spoolbuddy:{infoTitle:`SpoolBuddy devices`,infoBody:`SpoolBuddy kiosks register themselves automatically via heartbeat. Unregister a device here if it is no longer in use or if a stale duplicate was left behind by a daemon crash.`,duplicatesTitle:`{{count}} devices registered`,duplicatesBody:`Only the first registered device is used by the kiosk UI. If one of these is a stale duplicate from a crash, unregister it — an online device will re-register itself on its next heartbeat.`,empty:`No SpoolBuddy devices registered yet.`,online:`Online`,offline:`Offline`,unregister:`Unregister`,unregisterSuccess:`Device unregistered`,unregisterError:`Failed to unregister device`,confirmTitle:`Unregister SpoolBuddy device?`,confirmBody:`This will remove "{{hostname}}" ({{deviceId}}) from the database. If the device is online, it will re-register itself on its next heartbeat.`,ipAddress:`IP address`,firmware:`Firmware`,lastSeen:`Last seen`,daemonUptime:`Daemon uptime`,systemUptime:`System uptime`,never:`never`,nfc:`NFC`,scale:`Scale`,cpuTemp:`CPU temp`,cpuLoad:`CPU load`,memory:`Memory`,disk:`Disk`,update:`Update`,updateConfirmTitle:`Update Spoolbuddy daemon?`,updateConfirmBody:`Trigger a software update on "{{hostname}}"? The daemon will restart once the update is applied.`,restartBrowser:`Restart Browser`,restartBrowserConfirmTitle:`Restart kiosk browser?`,restartBrowserConfirmBody:`Restart the kiosk browser on "{{hostname}}"? The display will blank briefly.`,restartDaemon:`Restart Daemon`,restartDaemonConfirmTitle:`Restart Spoolbuddy daemon?`,restartDaemonConfirmBody:`Restart the Spoolbuddy daemon on "{{hostname}}"? The device will go offline for a few seconds.`,reboot:`Reboot`,rebootConfirmTitle:`Reboot device?`,rebootConfirmBody:`Reboot "{{hostname}}"? The device will be offline for around a minute.`,shutdown:`Shutdown`,shutdownConfirmTitle:`Shutdown device?`,shutdownConfirmBody:`Shutdown "{{hostname}}"? You will need physical access to power it back on.`,commandConfirm:`Confirm`,commandQueued:`Command queued`,commandError:`Failed to send command`},ldap:{title:`LDAP Authentication`,enabledDesc:`LDAP authentication is enabled`,disabledDesc:`LDAP authentication is disabled`,disabledHint:`Configure and save LDAP settings below, then enable.`,enabled:`LDAP authentication enabled`,disabled:`LDAP authentication disabled`,feature1:`Users can login with LDAP credentials`,feature2:`Local admin account remains as fallback`,feature3:`LDAP groups are mapped to BamBuddy groups on login`,serverConfig:`LDAP Server Configuration`,serverUrl:`Server URL`,serverUrlHint:`Use ldaps:// for SSL or ldap:// with StartTLS`,security:`Security`,securityHint:`StartTLS upgrades a plain connection to TLS. LDAPS uses TLS from the start.`,bindDn:`Bind DN (Service Account)`,bindPassword:`Bind Password`,searchBase:`Search Base DN`,userFilter:`User Search Filter`,userFilterHint:`{username} is replaced with the login username. Use (uid={username}) for OpenLDAP.`,advanced:`Advanced`,autoProvision:`Auto-provision users`,autoProvisionHint:`Automatically create a BamBuddy account on first LDAP login`,defaultGroup:`Default group`,defaultGroupNone:`— None (no fallback) —`,defaultGroupHint:`Fallback group assigned when an LDAP user authenticates but is not listed in any mapped LDAP group. Leave empty to leave unmapped users without permissions.`,groupMapping:`Group Mapping (JSON)`,groupMappingHint:`Map LDAP group DNs to BamBuddy groups. Available groups: `,testConnection:`Test Connection`,settingsSaved:`LDAP settings saved`,errors:{serverRequired:`LDAP server URL is required`,searchBaseRequired:`Search base DN is required`,enableAuthFirst:`Enable authentication first`,configureLdapFirst:`Save LDAP settings first`}},email:{smtpSettings:`SMTP Configuration`,smtpHost:`SMTP Server`,smtpPort:`SMTP Port`,security:`Security`,authentication:`Authentication`,username:`Username`,password:`Password`,fromEmail:`From Email`,fromName:`From Name`,testConnection:`Test SMTP Connection`,testRecipient:`Test Recipient Email`,sendTest:`Send Test Email`,sending:`Sending...`,save:`Save Settings`,saving:`Saving...`,advancedAuth:`Advanced Authentication`,advancedAuthEnabled:`Advanced Authentication is enabled`,advancedAuthEnabledDesc:`Email-based user management features are active. New users will receive auto-generated passwords via email, and users can reset their passwords through the forgot password feature.`,advancedAuthDisabled:`Advanced Authentication is disabled`,advancedAuthDisabledDesc:`Enable advanced authentication to activate email-based features for user management.`,enable:`Enable`,disable:`Disable`,feature1:`Passwords are auto-generated and emailed to new users`,feature2:`Users can login with username or email`,feature3:`Forgot password feature is available`,feature4:`Admins can reset user passwords via email`,errors:{requiredFields:`Please fill in all required fields`,usernameRequired:`Username is required when authentication is enabled`,enterTestEmail:`Please enter a test email address`,smtpServerAndEmail:`Please fill in SMTP Server and From Email before testing`,usernamePasswordRequired:`Username and Password are required when authentication is enabled`,configureSmtpFirst:`Please configure and test SMTP settings first`,enableAuthFirst:`Please enable authentication first to use email-based features.`},success:{settingsSaved:`SMTP settings saved successfully`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`None (Port 25)`},authOptions:{enabled:`Enabled`,disabled:`Disabled`}},appearance:`Appearance`,notifications:`Notifications`,smartPlugs:`Smart Plugs`,spoolman:`Spoolman`,updates:`Updates`,language:`Language`,languageDescription:`Select your preferred language`,theme:`Theme`,themeLight:`Light`,themeDark:`Dark`,themeSystem:`System`,defaultView:`Default View`,defaultViewDescription:`Page to show when opening the app`,checkForUpdates:`Check for Updates`,autoUpdate:`Auto Update`,currentVersion:`Current Version`,latestVersion:`Latest Version`,upToDate:`You are up to date`,updateAvailable:`Update available`,notificationLanguage:`Notification Language`,notificationLanguageDescription:`Language for push notifications`,bedCooledThreshold:`Bed Cooled Threshold`,bedCooledThresholdDescription:`Temperature below which the bed is considered cooled after a print`,userNotificationsEnabled:`User Notifications`,userNotificationsEnabledDescription:`Enable the user notifications menu and email notifications for print job events. Requires Advanced Authentication.`,userNotificationsDisabledHint:`Enable Advanced Authentication to use user notifications.`,notificationProviders:`Notification Providers`,addProvider:`Add Provider`,editProvider:`Edit Provider`,providerType:`Provider Type`,testNotification:`Test Notification`,testSuccess:`Test notification sent successfully`,testFailed:`Failed to send test notification`,quietHours:`Quiet Hours`,quietHoursDescription:`Do not disturb during these hours`,quietHoursStart:`Start`,quietHoursEnd:`End`,events:{title:`Notification Events`,printStart:`Print Started`,printComplete:`Print Completed`,printFailed:`Print Failed`,printStopped:`Print Stopped`,printProgress:`Progress Milestones`,printProgressDescription:`Notify at 25%, 50%, 75%`,printerOffline:`Printer Offline`,printerError:`Printer Error`,filamentLow:`Low Filament`,maintenanceDue:`Maintenance Due`,maintenanceDueDescription:`Notify when maintenance is needed`},smartPlug:{title:`Smart Plugs`,add:`Add Smart Plug`,edit:`Edit Smart Plug`,name:`Name`,ipAddress:`IP Address`,linkedPrinter:`Linked Printer`,autoOn:`Auto Power On`,autoOnDescription:`Turn on when print starts`,autoOff:`Auto Power Off`,autoOffDescription:`Turn off after print completes`,offDelay:`Off Delay`,offDelayMinutes:`Minutes after print`,offDelayTemp:`When nozzle below temperature`,currentState:`Current State`,turnOn:`Turn On`,turnOff:`Turn Off`},filamentTracking:`Filament Tracking`,filamentTrackingDesc:`Choose how to track your filament spools. You can use the built-in inventory or connect an external Spoolman server.`,filamentChecks:`Filament checks`,disableFilamentWarnings:`Disable filament warnings`,disableFilamentWarningsDesc:`Don't show warnings about insufficient filament when printing or queueing`,preferLowestFilament:`Prefer lowest remaining filament`,preferLowestFilamentDesc:`When multiple spools match, use the one with the least filament remaining`,preferLowestFilamentBackupNote:`Only takes effect when AMS Filament Backup is enabled on the printer — otherwise the printer cannot switch to a second spool when the picked one runs out.`,trackingModeBuiltIn:`Built-in Inventory`,trackingModeBuiltInDesc:`RFID auto-matching and usage tracking included`,trackingModeSpoolmanDesc:`External filament management server`,builtInFeatureRfid:`Automatically detects Bambu Lab RFID spools in AMS`,builtInFeatureUsage:`Tracks filament consumption per print`,builtInFeatureCatalog:`Manage spools, colors, and K-factor profiles`,builtInFeatureThirdParty:`Third-party spools can be assigned to inventory spools`,amsSyncButton:`Sync Weights from AMS`,amsSyncTitle:`Sync Spool Weights from AMS`,amsSyncMessage:`This will overwrite all inventory spool weights with the current AMS remain% values from connected printers. Use this to recover from corrupted weight data. Printers must be online.`,amsSyncing:`Syncing...`,amsSyncSuccess:`{{synced}} spool(s) synced, {{skipped}} skipped`,amsSyncError:`Failed to sync weights from AMS`,spoolmanAmsSyncButton:`Sync Spoolman Weights from AMS`,spoolmanAmsSyncTitle:`Sync Spoolman Spool Weights from AMS`,spoolmanAmsSyncMessage:`This will update all Spoolman spool weights based on the current AMS remain% values from connected printers. Printers must be online.`,spoolmanAmsSyncing:`Syncing...`,spoolmanAmsSyncSuccess:`{{synced}} spool(s) synced, {{skipped}} skipped`,spoolmanAmsSyncError:`Failed to sync Spoolman weights from AMS`,spoolmanAmsSyncErrorUnreachable:`Failed to sync Spoolman weights (Spoolman unreachable)`,spoolmanAmsSyncErrorNotConfigured:`Failed to sync Spoolman weights (Spoolman not configured)`,spoolmanNotConfigured:`Spoolman not configured`,spoolmanFilamentCatalogTitle:`Spoolman Filament Catalog`,spoolmanFilamentCatalogDesc:`Filament names and tare weights from your Spoolman instance. Name and spool weight are editable here; all other properties are managed directly in Spoolman.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`URL of your Spoolman server (e.g., http://localhost:7912)`,spoolmanConnected:`Connected`,spoolmanDisconnected:`Disconnected`,status:`Status`,connect:`Connect`,disconnect:`Disconnect`,howSyncWorks:`How Sync Works`,syncInfoRfidOnly:`Only official Bambu Lab spools with RFID are synced`,syncInfoAutoCreate:`New spools are auto-created in Spoolman on first sync`,syncInfoThirdPartySkipped:`Non-Bambu Lab spools (third-party, refilled) are skipped`,linkingExistingSpools:`Linking Existing Spools`,linkingExistingSpoolsDesc:`To link existing Spoolman spools to your AMS, hover over an AMS slot and click "Link to Spoolman".`,syncMode:`Sync Mode`,syncModeAuto:`Automatic`,syncModeManual:`Manual Only`,syncModeAutoDesc:`AMS data syncs automatically when changes are detected`,syncModeManualDesc:`Only sync when manually triggered`,syncAmsData:`Sync AMS Data`,syncAmsDataDesc:`Manually sync printer AMS data to Spoolman`,allPrinters:`All Printers`,noDefaultPrinter:`No default (ask each time)`,sidebarOrder:`Sidebar order`,saveThumbnails:`Save thumbnails`,captureFinishPhoto:`Capture finish photo`,noPrintersConfigured:`No printers configured`,archiveMode:{always:`Always create archive entry`,never:`Never create archive entry`,ask:`Ask each time`},checkForUpdatesLabel:`Check for updates`,checkPrinterFirmware:`Check printer firmware`,includeBetaUpdates:`Include beta versions`,includeBetaUpdatesDesc:`Notify about beta and prerelease versions when checking for updates`,enableRetry:`Enable retry`,homeAssistantDescription:`Control smart plugs via Home Assistant`,environmentManagedLabel:`(Environment Managed)`,autoEnabledViaEnv:`Automatically enabled via environment variables`,urlFromEnvReadOnly:`Value set by HA_URL environment variable (read-only)`,tokenFromEnvReadOnly:`Value set by HA_TOKEN environment variable (read-only)`,mqttConnectedTo:`Connected to`,prometheusDescription:`Expose printer data in Prometheus format`,noSmartPlugsTitle:`No smart plugs configured`,noSmartPlugsDescription:`Add a Tasmota-based smart plug to track energy usage and automate power control.`,noProvidersTitle:`No providers configured`,noProvidersDescription:`Add a provider to receive alerts.`,noTemplatesAvailable:`No templates available. Restart the backend to seed default templates.`,apiPermissionView:`View printer status and queue`,apiPermissionEdit:`Add and remove items from print queue`,apiKeysEmptyTitle:`No API keys`,apiKeysEmptyDescription:`Create an API key to integrate with external services.`,noUsersFound:`No users found`,noGroupsFound:`No groups found`,noGroupsAvailable:`No groups available`,passwordsDoNotMatch:`Passwords do not match`,systemGroupWarning:`System group names cannot be changed`,authDisabledTitle:`Authentication is Disabled`,authDisabledFeature1:`Require login to access the system`,authDisabledFeature2:`Create multiple users with group-based permissions`,authDisabledFeature3:`Control access with 50+ granular permissions`,userHasCreated:`This user has created:`,userItemsQuestion:`What would you like to do with these items?`,deleteUserConfirm:`Are you sure you want to delete this user?`,actionCannotBeUndone:`This action cannot be undone.`,addFirstSmartPlug:`Add Your First Smart Plug`,providers:`Providers`,log:`Log`,testAll:`Test All`,testResults:`Test Results`,testPassedCount:`{{count}} passed`,testFailedCount:`{{count}} failed`,messageTemplates:`Message Templates`,messageTemplatesDescription:`Customize notification messages for each event.`,apiKeys:`API Keys`,apiKeysDescription:`Create API keys for external integrations and webhooks.`,createKey:`Create Key`,apiKeyCreated:`API Key Created Successfully`,apiKeyCopyWarning:`Copy this key now - it won't be shown again!`,useInApiBrowser:`Use in API Browser`,apiKeyQrButton:`QR code`,apiKeyQrTitle:`Scan to configure`,apiKeyQrCaption:`Scan with your mobile app to add this server and API key.`,apiKeyQrWarning:`Contains your secret API key — don't share or screenshot it where others can see.`,createNewApiKey:`Create New API Key`,keyName:`Key Name`,keyNamePlaceholder:`e.g., Home Assistant, OctoPrint`,readStatus:`Read Status`,readStatusDescription:`View printer status and queue`,manageQueue:`Manage Queue`,manageQueueDescription:`Add and remove items from print queue`,controlPrinter:`Control Printer`,controlPrinterDescription:`Pause, resume, and stop prints`,manageLibrary:`Manage Library`,manageLibraryDescription:`Upload, rename, and delete library files; import models from MakerWorld`,manageInventory:`Manage Inventory`,manageInventoryDescription:`Create, update, and delete spools and inventory records. Required for SpoolBuddy kiosks (NFC scan, scale readings, kiosk system commands).`,libraryBadge:`Library`,inventoryBadge:`Inventory`,cloudAccess:`Allow cloud access`,cloudAccessDescription:`Read Bambu Cloud presets and filaments on your behalf. Requires you to be signed into Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Update electricity price`,updateEnergyCostDescription:`Allow this key to POST a new per-kWh electricity price to /settings/electricity-price. Useful for Home Assistant dynamic-tariff automations (Tibber, Octopus, etc.). This is the only settings field writable via API key.`,energyCostBadge:`Energy`,legacyKey:`Legacy`,legacyKeyTooltip:`Created before per-user ownership; recreate to use cloud access`,unnamedKey:`Unnamed Key`,lastUsed:`Last used`,read:`Read`,control:`Control`,createFirstKey:`Create Your First Key`,webhookEndpoints:`Webhook Endpoints`,webhookApiKeyHint:`Use your API key in the X-API-Key header.`,webhook:{getAllStatus:`Get all printer status`,getSpecificStatus:`Get specific printer status`,addToQueue:`Add to print queue`,pausePrint:`Pause print`,resumePrint:`Resume print`,stopPrint:`Stop print`},apiBrowser:`API Browser`,apiBrowserDescription:`Explore and test all available API endpoints.`,apiKeyForTesting:`API Key for Testing`,apiKeyPlaceholder:`Paste your API key here to test authenticated endpoints...`,apiKeyHint:`This key will be sent as X-API-Key header with requests.`,deleteApiKeyTitle:`Delete API Key`,deleteApiKeyMessage:`Are you sure you want to delete this API key? Any integrations using this key will stop working.`,deleteKey:`Delete Key`,amsDisplayThresholds:`AMS Display Thresholds`,amsThresholdsDescription:`Configure color thresholds for AMS humidity and temperature indicators.`,humidity:`Humidity`,goodGreen:`Good (green)`,fairOrange:`Fair (orange)`,aboveFairBad:`Above fair threshold shows as red (bad)`,fairAlsoDryingThreshold:`This threshold is also used to trigger auto-drying when enabled`,temperature:`Temperature`,goodBlue:`Good (blue)`,aboveFairHot:`Above fair threshold shows as red (hot)`,historyRetention:`History Retention`,keepSensorHistory:`Keep sensor history for`,historyRetentionDescription:`Older humidity and temperature data will be automatically deleted`,defaultPrintOptions:`Default Print Options`,defaultPrintOptionsDescription:`Set default values for print options when starting new prints. These can be overridden per print in the print dialog.`,defaultBedLevelling:`Bed Levelling`,defaultBedLevellingDesc:`Auto-level bed before print`,defaultFlowCali:`Flow Calibration`,defaultFlowCaliDesc:`Calibrate extrusion flow`,defaultVibrationCali:`Vibration Calibration`,defaultVibrationCaliDesc:`Reduce ringing artifacts`,defaultLayerInspect:`First Layer Inspection`,defaultLayerInspectDesc:`AI inspection of first layer`,defaultTimelapse:`Timelapse`,defaultTimelapseDesc:`Record timelapse video`,defaultNozzleOffsetCali:`Nozzle Offset Calibration`,defaultNozzleOffsetCaliDesc:`Calibrate nozzle offsets between extruders`,tempFanPresetsTitle:`Temperature & Fan Presets`,tempFanPresetsDescription:`Customize the quick-select values shown in printer-card temperature and fan-speed popovers. The Off button is always shown.`,tempFanPresetsNozzle:`Nozzle temperature`,tempFanPresetsBed:`Bed temperature`,tempFanPresetsChamber:`Chamber temperature`,tempFanPresetsFan:`Fan speed`,tempFanPresetsReset:`Reset to defaults`,staggeredStart:`Staggered Start`,staggeredStartDescription:`Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.`,plateClear:`Plate-Clear Confirmation`,requirePlateClear:`Require plate-clear confirmation`,requirePlateClearDescription:`When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disabling this also hides the plate status badge and the "Mark plate as cleared" button on printer cards.`,gcodeInjection:`G-code Injection`,gcodeInjectionDescription:`Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.`,gcodeInjectionNoPrinters:`No printers found. Add printers to configure G-code snippets.`,gcodeStartLabel:`Start G-code`,gcodeEndLabel:`End G-code`,gcodeStartPlaceholder:`G-code prepended before the print starts...`,gcodeEndPlaceholder:`G-code appended after the print ends...`,staggerGroupSize:`Group size`,staggerGroupSizeHelp:`Printers to start simultaneously per group`,staggerInterval:`Interval (minutes)`,staggerIntervalHelp:`Delay between each group starting`,queueDrying:`Queue Auto-Drying`,queueDryingDescription:`Automatically dry AMS filament when printer is idle between queued prints. Uses humidity threshold above to trigger drying.`,queueDryingEnabled:`Enable auto-drying`,queueDryingEnabledDescription:`Start AMS drying automatically when printer is idle and humidity is above threshold`,queueDryingBlock:`Wait for drying to complete`,queueDryingBlockDescription:`Block the print queue until drying finishes. When off, prints take priority over drying.`,ambientDryingEnabled:`Ambient drying`,ambientDryingEnabledDescription:`Automatically dry filament on idle printers when humidity exceeds threshold, even without queued prints.`,dryingPresets:`Drying Presets`,dryingPresetsDescription:`Temperature and duration per filament type. AMS 2 Pro uses lower temps, AMS-HT supports higher temps.`,dryingFilament:`Filament`,humidityThresholds:`Humidity Thresholds`,humidityThresholdsDescription:`Per-filament humidity trigger for auto-drying and alarms. Mixed loads in one AMS use the lowest threshold.`,humidityThresholdCol:`Threshold`,humidityThresholdDefault:`Default (unknown types)`,printModal:`Print Modal`,expandCustomMapping:`Expand custom mapping by default`,expandCustomMappingDescription:`When printing to multiple printers, show per-printer AMS mapping expanded`,authentication:`Authentication`,authEnabledDescription:`Your instance is secured with user authentication`,authDisabledDescription:`Enable to require login and manage user access`,authDisabledMessage:`Enable authentication to create user accounts, manage permissions, and secure your Bambuddy instance.`,enableAuthentication:`Enable Authentication`,currentUser:`Current User`,changePassword:`Change Password`,admin:`Admin`,users:`Users`,addUser:`Add User`,groups:`Groups`,addGroup:`Add Group`,system:`System`,noDescription:`No description`,userCount:`{{count}} users`,permissionCount:`{{count}} permissions`,createUser:`Create User`,username:`Username`,enterUsername:`Enter username`,password:`Password`,enterPassword:`Enter password`,passwordRequirements:`At least 8 characters, with one uppercase, one lowercase, one digit, and one special character.`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Confirm password`,viewReleaseOnGitHub:`View release on GitHub`,turnAllPlugsOn:`Turn all plugs on`,turnAllPlugsOff:`Turn all plugs off`,clearNotificationLogs:`Clear Notification Logs`,clearLogsMessage:`This will permanently delete all notification logs older than 30 days. This action cannot be undone.`,clearLogs:`Clear Logs`,resetUiPreferences:`Reset UI Preferences`,resetUiPreferencesMessage:`This will reset all UI preferences to defaults: sidebar order, theme, dashboard layout, view modes, and sorting preferences. Your printers, archives, and server settings will NOT be affected. The page will reload after clearing.`,resetPreferences:`Reset Preferences`,deleteGroupTitle:`Delete Group`,deleteGroupMessage:`Are you sure you want to delete this group? Users in this group will lose these permissions.`,deleteGroup:`Delete Group`,disableAuthenticationTitle:`Disable Authentication`,disableAuthenticationMessage:`Are you sure you want to disable authentication? This will make your Bambuddy instance accessible without login. All users will remain in the database but authentication will be disabled.`,disableAuthentication:`Disable Authentication`,configureBambuddy:`Configure Bambuddy`,systemDefault:`System Default`,archiveSettings:`Archive Settings`,newWindow:`New Window`,embeddedOverlay:`Embedded Overlay`,preferredSlicer:`Preferred Slicer`,preferredSlicerDescription:`Slicer used for in-app slicing via the API sidecar`,openInSlicerLabel:`Open in Slicer`,openInSlicerInherit:`Same as API slicer`,openInSlicerDescription:`Desktop slicer used by the 'Open in Slicer' button. Leave on 'Same as API slicer' to inherit, or pick a different slicer to use locally.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.`,useSlicerApi:`Use Slicer API`,useSlicerApiDescription:`When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer sidecar URL`,bambuStudioApiUrl:`Bambu Studio sidecar URL`,slicerApiUrlDescription:`URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.`,slicerBundlesRemoved:{title:`Slicer Bundles (removed)`,description:`Printer Preset Bundle (.bbscfg) import was removed. BambuStudio's bundle export only includes user-customised presets, so the import never delivered standard processes / filaments and slicing fell back to embedded settings.`,alternatives:`Use Single Preset Import for individual customs, or sync via Bambu Cloud / Orca Cloud. Stock presets come from the slicer sidecar automatically.`,lookupOrder:`Slice-time preset lookup order: 1) Imported (local), 2) Orca Cloud, 3) Bambu Cloud, 4) Standard (sidecar fallback).`},externalCameras:`External Cameras`,costTracking:`Cost Tracking`,printsOnly:`Prints Only`,totalConsumption:`Total Consumption`,dataManagement:`Data Management`,storageUsage:`Storage Usage`,storageUsageDescription:`Breakdown of data usage by category`,storageUsageTotal:`Total`,storageUsageErrors:`Errors`,storageUsageOtherBreakdown:`Other (includes static assets, scripts, and configuration files)`,storageUsageSystem:`System`,storageUsageData:`Data`,storageUsageUnavailable:`Storage usage information unavailable`,clearNotificationLogsDescription:`Delete notification logs older than 30 days`,resetUiPreferencesDescription:`Reset sidebar order, theme, view modes, and layout preferences. Printers, archives, and settings are not affected.`,enableHomeAssistant:`Enable Home Assistant`,enableMqtt:`Enable MQTT`,useTls:`Use TLS`,enableMetricsEndpoint:`Enable Metrics Endpoint`,availableMetrics:`Available Metrics`,editUser:`Edit User`,deleteUserTitle:`Delete User`,groupName:`Group Name`,leaveEmptyForAnonymous:`Leave empty for anonymous`,leaveEmptyForNoAuth:`Leave empty for no authentication`,enterNewPassword:`Enter new password`,confirmNewPassword:`Confirm new password`,enterGroupName:`Enter group name`,enterDescriptionOptional:`Enter description (optional)`,enterCurrentPassword:`Enter current password`,enterNewPasswordMin6:`Enter new password (min 6 characters)`,toast:{keyCopied:`Key copied to clipboard`,copyFailed:`Failed to copy key`,keyAddedToBrowser:`Key added to API Browser`,clearLogsFailed:`Failed to clear logs`,uiPreferencesReset:`UI preferences reset. Refreshing...`,authDisabled:`Authentication disabled successfully`,authDisableFailed:`Failed to disable authentication`,apiKeyCreated:`API key created`,apiKeyDeleted:`API key deleted`,userCreated:`User created successfully`,userUpdated:`User updated successfully`,userDeleted:`User deleted successfully`,groupCreated:`Group created successfully`,groupUpdated:`Group updated successfully`,groupDeleted:`Group deleted successfully`,fillRequiredFields:`Please fill in all required fields`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 8 characters`,passwordNeedsUppercase:`Password must contain at least one uppercase letter`,passwordNeedsLowercase:`Password must contain at least one lowercase letter`,passwordNeedsDigit:`Password must contain at least one digit`,passwordNeedsSpecial:`Password must contain at least one special character`,enterGroupName:`Please enter a group name`,settingsSaved:`Settings saved`,noPermissionUpdate:`You do not have permission to change settings`,cameraSettingsSaved:`Camera settings saved`,enterCameraUrl:`Please enter a camera URL`,passwordChanged:`Password changed successfully`,connectionFailed:`Connection failed`,testFailed:`Test failed`,cameraConnected:`Camera connected{{resolution}}`},testConnection:`Test Connection`,catalog:{spoolCatalog:`Spool Catalog`,spoolCatalogDescription:`Empty spool weights by brand/type. Used for automatic weight lookup when adding spools.`,searchCatalog:`Search catalog...`,addNewEntry:`Add New Entry`,namePlaceholder:`Name (e.g., Bambu Lab - Plastic)`,weight:`Weight`,type:`Type`,default:`Default`,custom:`Custom`,noMatch:`No entries match your search`,empty:`No entries in catalog`,deleteEntry:`Delete Entry`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,resetCatalog:`Reset Catalog`,resetConfirm:`Reset catalog to defaults? This will remove all custom entries.`,loadFailed:`Failed to load spool catalog`,nameWeightRequired:`Name and weight are required`,entryAdded:`Entry added`,addFailed:`Failed to add entry`,entryUpdated:`Entry updated`,updateFailed:`Failed to update entry`,entryDeleted:`Entry deleted`,deleteFailed:`Failed to delete entry`,resetSuccess:`Catalog reset to defaults`,resetFailed:`Failed to reset catalog`,exported:`Exported {{count}} entries`,imported:`Imported {{added}} entries ({{skipped}} skipped)`,importFailed:`Failed to import: invalid JSON format`,exportTooltip:`Export catalog to JSON`,importTooltip:`Import catalog from JSON`,resetTooltip:`Reset to defaults`,selectedCount:`{{count}} selected`,deleteSelected:`Delete Selected`,bulkDeleteConfirm:`Are you sure you want to delete {{count}} entries?`,bulkDeleted:`Deleted {{count}} entries`,bulkDeleteFailed:`Failed to delete entries`,material:`Material`,spoolWeight:`Spool Weight`,color:`Color`,updateSpoolWeight:`Update Spool Weight`,filamentUpdated:`Filament updated`,filamentUpdateFailed:`Failed to update filament`,filamentUpdateInvalid:`Invalid filament data`,keepExistingSpoolWeight:`Keep old weight for existing spools`,keepExistingSpoolWeightDesc:`Spools already created with this filament type retain the old tare weight. New spools use the updated value.`,applyToAllSpools:`Apply to all spools`,applyToAllSpoolsDesc:`All weight calculations for this filament type immediately use the new tare weight.`},colorCatalog:{title:`Color Catalog`,description:`Filament colors by manufacturer/material. Used for automatic color lookup when adding spools.`,searchColors:`Search colors...`,allManufacturers:`All manufacturers`,addNewColor:`Add New Color`,manufacturer:`Manufacturer`,colorName:`Color Name`,hex:`Hex`,materialOptional:`Material (optional)`,showing:`Showing {{filtered}} of {{total}} colors`,noMatch:`No colors match your search`,empty:`No colors in catalog`,deleteColor:`Delete Color`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,resetCatalog:`Reset Color Catalog`,resetConfirm:`Reset catalog to defaults? This will remove all custom colors.`,sync:`Sync`,starting:`Starting...`,syncTooltip:`Sync from FilamentColors.xyz (2000+ colors, may take a minute)`,loadFailed:`Failed to load color catalog`,fieldsRequired:`Manufacturer, color name, and hex color are required`,colorAdded:`Color added`,addFailed:`Failed to add color`,colorUpdated:`Color updated`,updateFailed:`Failed to update color`,colorDeleted:`Color deleted`,deleteFailed:`Failed to delete color`,resetSuccess:`Color catalog reset to defaults`,resetFailed:`Failed to reset catalog`,syncUpToDate:`Already up to date ({{count}} colors checked)`,syncComplete:`Added {{added}} new colors ({{skipped}} already existed)`,syncError:`Sync error`,syncFailed:`Failed to sync from FilamentColors.xyz`,exported:`Exported {{count}} colors`,imported:`Imported {{added}} colors ({{skipped}} skipped)`,importFailed:`Failed to import: invalid JSON format`,selectedCount:`{{count}} selected`,deleteSelected:`Delete Selected`,bulkDeleteConfirm:`Are you sure you want to delete {{count}} colors?`,bulkDeleted:`Deleted {{count}} colors`,bulkDeleteFailed:`Failed to delete colors`},dateFormat:`Date Format`,dateFormatUs:`US (MM/DD/YYYY)`,dateFormatEu:`EU (DD/MM/YYYY)`,dateFormatIso:`ISO (YYYY-MM-DD)`,timeFormat:`Time Format`,timeFormat12:`12-hour (3:30 PM)`,timeFormat24:`24-hour (15:30)`,defaultPrinter:`Default Printer`,defaultPrinterDescription:`Pre-select this printer for uploads, reprints, and other operations.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Use Sidebar to reorder items, reset visibility, and manage custom links.`,setDefault:`Set Default`,sidebarOrderSetDefaultHint:`Set default applies the current menu order to users who haven't customized theirs.`,sidebarDefaultSet:`Default menu order has been set.`,sidebarDefaultCleared:`Default menu order cleared.`,sidebarDefaultFailed:`Failed to set default menu order.`,reset:`Reset`,darkMode:`Dark Mode`,lightMode:`Light Mode`,active:`(active)`,background:`Background`,accent:`Accent`,style:`Style`,bgNeutral:`Neutral`,bgWarm:`Warm`,bgCool:`Cool`,bgOled:`OLED Black`,bgSlate:`Slate Blue`,bgForest:`Forest Green`,accentGreen:`Green`,accentTeal:`Teal`,accentBlue:`Blue`,accentOrange:`Orange`,accentPurple:`Purple`,accentRed:`Red`,styleClassic:`Classic`,styleGlow:`Glow`,styleVibrant:`Vibrant`,themeToggleHint:`Toggle between dark, light, and system mode using the icon in the sidebar.`,autoArchivePrints:`Auto-archive prints`,autoArchiveDescription:`Automatically save 3MF files when prints complete`,saveThumbnailsDescription:`Extract and save preview images from 3MF files`,captureFinishPhotoDescription:`Take a photo from printer camera when print completes. Bambuddy records a brief timelapse during the print so the photo can be sourced from the moment before the bed drops; the timelapse file is kept if you enabled timelapse for this print, otherwise it is deleted automatically after the photo is captured.`,ffmpegNotInstalled:`ffmpeg not installed`,ffmpegRequired:`Camera capture requires ffmpeg. Install it via brew install ffmpeg (macOS) or apt install ffmpeg (Linux).`,camera:`Camera`,cameraViewMode:`Camera View Mode`,cameraOverlayDescription:`Camera opens in a resizable overlay on the main screen`,cameraWindowDescription:`Camera opens in a separate browser window`,externalCamerasDescription:`Configure external cameras to replace the built-in printer camera. Supports MJPEG streams, RTSP, HTTP snapshots, and USB cameras (V4L2). When enabled, the external camera is used for live view and finish photos.`,cameraPlaceholderUsb:`Device path (/dev/video0)`,cameraPlaceholderUrl:`Camera URL (rtsp://... or http://...)`,cameraTypeMjpeg:`MJPEG Stream`,cameraTypeRtsp:`RTSP Stream`,cameraTypeSnapshot:`HTTP Snapshot`,cameraTypeUsb:`USB Camera (V4L2)`,cameraSnapshotUrl:`Snapshot URL (optional)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`Single-frame URL used for notification thumbnails, finish photos, layer-timelapse frames, and plate detection. Timelapse and plate detection each require their own per-printer toggle — this URL is just the image source they pull from when active. Leave blank to capture from the live stream above. Useful for go2rtc (/api/frame.jpeg) and IP cameras with a dedicated snapshot endpoint.`,cameraRotation:`Rotation`,test:`Test`,connected:`Connected`,disconnected:`Disconnected`,currency:`Currency`,defaultFilamentCost:`Default filament cost (per kg)`,electricityCost:`Electricity cost per kWh`,energyDisplayMode:`Energy display mode`,energyModePrintDescription:`Dashboard shows sum of energy used during prints`,energyModeTotalDescription:`Dashboard shows lifetime energy from smart plugs`,fileManager:`File Manager`,createArchiveEntry:`Create Archive Entry When Printing`,createArchiveEntryDescription:`When printing from File Manager, optionally create an archive entry`,lowDiskSpaceWarning:`Low Disk Space Warning`,lowDiskSpaceDescription:`Show warning when free disk space falls below this threshold`,printerFirmware:`Printer Firmware`,checkFirmwareDescription:`Check for printer firmware updates from Bambu Lab`,bambuddySoftware:`Bambuddy Software`,autoCheckDescription:`Automatically check for new versions on startup`,checkNow:`Check now`,updateAvailableVersion:`Update available: v{{version}}`,releaseNotes:`Release Notes`,updateViaDocker:`Update via Docker Compose:`,updateViaHomeAssistant:`Updates are managed by the Home Assistant Supervisor. Open Settings → Add-ons → Bambuddy in Home Assistant to install the new version.`,updateViaWindowsInstaller:`Windows installations are updated by re-running the installer. Download the new version below — your data, settings and printers are preserved.`,downloadWindowsInstaller:`Download installer for v{{version}}`,installUpdate:`Install Update`,latestVersionRunning:`You're running the latest version`,failedToCheckUpdates:`Failed to check for updates: {{error}}`,backupRestore:`Backup & Restore`,backupRestoreDescription:`Export/import settings and configure GitHub backup`,goToBackup:`Go to Backup`,externalUrl:`External URL`,externalUrlDescription:`The external URL where Bambuddy is accessible. Used for notification images and external integrations.`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`Include protocol and port (e.g., http://192.168.1.100:8000)`,ftpRetry:`FTP Retry`,ftpRetryDescription:`Retry FTP operations when printer WiFi is unreliable. Applies to 3MF downloads, print uploads, timelapse downloads, and firmware updates.`,autoRetryDescription:`Automatically retry failed FTP operations`,retryAttempts:`Retry attempts`,retryDelay:`Retry delay`,connectionTimeout:`Connection timeout`,time_one:`{{count}} time`,time_other:`{{count}} times`,second_one:`{{count}} second`,second_other:`{{count}} seconds`,nSeconds:`{{count}} seconds`,increaseForWeakWifi:`Increase for printers with weak WiFi`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Connect to Home Assistant to control smart plugs via HA's REST API. Supports switch, light, input_boolean, and script entities.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`Long-Lived Access Token`,haTokenHint:`Create a token in HA: Profile → Long-Lived Access Tokens → Create Token`,connectionSuccessful:`Connection Successful`,connectionFailed:`Connection Failed`,haConnectionSuccess:`Successfully connected to Home Assistant.`,haConnectionFailed:`Failed to connect to Home Assistant.`,mqttPublishing:`MQTT Publishing`,mqttDescription:`Publish BamBuddy events to an external MQTT broker for integration with Node-RED, Home Assistant, and other automation systems.`,mqttEnableDescription:`Publish events to external MQTT broker`,brokerHostname:`Broker hostname`,port:`Port`,usernameOptional:`Username (optional)`,passwordOptional:`Password (optional)`,topicPrefix:`Topic prefix`,topicPrefixHint:`Topics will be: {{prefix}}/printers//status, etc.`,prometheusMetrics:`Prometheus Metrics`,prometheusEndpointDescription:`Expose printer metrics at /api/v1/metrics for Prometheus/Grafana monitoring.`,bearerTokenOptional:`Bearer Token (optional)`,bearerTokenHint:`If set, requests must include Authorization: Bearer `,metricsConnectionStatus:`Connection status`,metricsPrinterState:`Printer state (idle/printing/etc)`,metricsPrintProgress:`Print progress 0-100%`,metricsBedTemp:`Bed temperature`,metricsNozzleTemp:`Nozzle temperature`,metricsPrintsTotal:`Total prints by result`,metricsMore:`...and more (layers, fans, queue, filament usage)`,smartPlugsDescription:`Connect smart plugs (Tasmota or Home Assistant) to automate power control and track energy usage for your printers.`,allOn:`All On`,allOff:`All Off`,addSmartPlug:`Add Smart Plug`,energySummary:`Energy Summary`,currentPower:`Current Power`,plugsOnline:`{{reachable}}/{{total}} plugs online`,today:`Today`,yesterday:`Yesterday`,total:`Total`,enablePlugsForSummary:`Enable plugs to see energy summary`,addNotificationProvider:`Add`,systemBadge:`(System)`,creating:`Creating...`,changing:`Changing...`,deleteUserAndItems:`Delete user AND their items`,deleteUserKeepItems:`Delete user, keep items (become ownerless)`,ok:`OK`,twoFa:{totpTitle:`Authenticator App (TOTP)`,totpDesc:`Use an authenticator app like Google Authenticator, Aegis or Authy.`,emailOtpTitle:`Email OTP`,emailOtpDesc:`Send a one-time code to {{email}} when you log in.`,emailOtpNoEmail:`Add an email address to your account to enable this method.`,addEmailFirst:`Your account has no email address. Ask an admin to add one before enabling Email OTP.`,setupTotp:`Set up Authenticator App`,setupAuthApp:`Set up Authenticator App`,setupInstructions:`Scan the QR code below with your authenticator app, then confirm with a code.`,manualEntry:`Can't scan? Enter this secret manually:`,scannedContinue:`I've scanned the code — continue`,enterCodeToConfirm:`Enter the 6-digit code from your authenticator app to confirm setup.`,activate:`Activate`,disableTotp:`Disable Authenticator`,disableConfirmHint:`Enter a valid TOTP code or a backup code to disable the authenticator.`,totpDisabled:`Authenticator app disabled.`,emailOtpEnabled:`Email OTP enabled.`,emailOtpDisabled:`Email OTP disabled.`,smtpRequired:`Please configure and test SMTP settings first.`,invalidCode:`Invalid code. Please try again.`,enableEmailOtp:`Enable Email OTP`,disableEmailOtp:`Disable Email OTP`,emailSetupEnterCode:`A verification code has been sent to your email address. Enter it below to confirm you own this inbox.`,verifyAndEnable:`Verify & Enable`,emailDisablePasswordHint:`Enter your account password to confirm disabling email OTP.`,passwordPlaceholder:`Enter your password`,backupCodesTitle:`Save your backup codes`,backupCodesWarning:`Save these codes somewhere safe. Each code can only be used once and they will not be shown again.`,backupCodesRemaining:`{{count}} backup codes remaining`,savedCodes:`I've saved my codes`,regenBackup:`Regenerate Backup Codes`,regenBackupHint:`Enter your current TOTP code to generate 10 new backup codes. All existing backup codes will be invalidated.`,newBackupCodes:`New backup codes`,linkedAccounts:`Linked SSO Accounts`,linkedAccountsDesc:`These external identity providers are linked to your account.`,oidcUnlinked:`Account unlinked.`},sessionPolicy:{title:`Session Policy`,description:`Maximum session lifetime for new user logins. Already-issued tokens keep their original expiry.`,preset24h:`24 hours`,preset7d:`7 days`,preset30d:`30 days`,customHoursLabel:`Custom session lifetime in hours`,hoursSuffix:`hours`,warning:`Longer sessions reduce automatic logout protection. Recommended only for trusted single-user deployments.`},oidc:{title:`SSO / OIDC Providers`,desc:`Configure OpenID Connect providers to allow single sign-on via external identity providers.`,addProvider:`Add Provider`,newProvider:`New Provider`,empty:`No OIDC providers configured yet.`,created:`Provider created.`,updated:`Provider updated.`,deleted:`Provider deleted.`,refreshIcon:`Refresh icon`,removeIcon:`Remove icon`,iconRefreshed:`Icon refreshed.`,iconRemoved:`Icon removed.`,iconFetchFailed:`Icon could not be fetched from the provider URL.`,deleteTitle:`Delete Provider`,deleteMessage:`Delete "{{name}}"? All linked user accounts will be disconnected.`,form:{name:`Display Name`,issuerUrl:`Issuer URL`,clientId:`Client ID`,clientSecret:`Client Secret`,scopes:`Scopes`,iconUrl:`Icon URL (optional)`,enabled:`Enabled`,autoCreate:`Auto-create users`,autoCreateDesc:`Automatically create a local account on first login.`,autoLink:`Auto-link existing accounts`,autoLinkDesc:`Link existing local accounts by matching email on first login.`,secretHint:`leave blank to keep current`,secretPlaceholder:`new secret`,emailClaim:`Email Claim`,emailClaimDesc:`JWT claim used as email identity. Use 'preferred_username' or 'upn' for Azure Entra ID (which does not send email_verified). Only use trusted claim names.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.`,requireEmailVerified:`Require email verified`,requireEmailVerifiedDesc:`Only accept the email claim when the provider marks it as verified.`,requireEmailVerifiedWarning:`Warning: email will be accepted even without verification. Use only with trusted providers.`,requireEmailVerifiedAutoLink:`Disable auto-link first to change this setting.`,defaultGroup:`Default Group`,defaultGroupDesc:`Group assigned to auto-created users. Falls back to Viewers if not set.`,defaultGroupViewersFallback:`Viewers (default)`}},encryption:{title:`MFA Encryption Status`,enabledFromEnv:`At-rest encryption enabled (key from MFA_ENCRYPTION_KEY environment variable)`,enabledFromFile:`At-rest encryption enabled (key loaded from data directory)`,enabledGenerated:`At-rest encryption enabled with auto-generated key`,notConfigured:`At-rest encryption not configured`,notConfiguredDesc:`TOTP secrets and OIDC client_secrets are stored in plaintext. Set MFA_ENCRYPTION_KEY or restart Bambuddy with a writable data directory to auto-generate one.`,allEncrypted:`All MFA secrets are encrypted at rest.`,legacyRowsLabel:`Legacy plaintext rows`,encryptedRowsLabel:`Encrypted rows`,legacyRowsWarning:`{{count}} legacy plaintext row(s) detected. Re-save the OIDC provider or re-enroll the user’s authenticator app to migrate to encrypted storage.`,backupHint:`The auto-generated key is stored at DATA_DIR/.mfa_encryption_key and is included in local backup ZIPs. Keep your backups secure or set MFA_ENCRYPTION_KEY explicitly.`,decryptionBrokenTitle:`Encryption key missing`,decryptionBrokenError:`{{count}} encrypted record(s) cannot be decrypted because the encryption key is no longer available. Restore the previous MFA_ENCRYPTION_KEY or DATA_DIR/.mfa_encryption_key to recover.`,migrationErrorWarning:`{{count}} legacy row(s) failed to re-encrypt at startup. Check server logs and restart Bambuddy to retry.`}},notification:{printStarted:{title:`Print Started`,body:`{{printer}}: {{filename}} has started printing`},printCompleted:{title:`Print Completed`,body:`{{printer}}: {{filename}} completed successfully`},printFailed:{title:`Print Failed`,body:`{{printer}}: {{filename}} has failed`},printStopped:{title:`Print Stopped`,body:`{{printer}}: {{filename}} was stopped`},printProgress:{title:`Print Progress`,body:`{{printer}}: {{filename}} is {{percent}}% complete`},printerOffline:{title:`Printer Offline`,body:`{{printer}} is offline`},printerError:{title:`Printer Error`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Low Filament`,body:`{{printer}}: Filament is running low`},maintenanceDue:{title:`Maintenance Due`,body:`{{printer}}: {{items}} need attention`}},errors:{generic:`Something went wrong`,networkError:`Network error. Please check your connection.`,notFound:`Not found`,unauthorized:`Unauthorized`,serverError:`Server error`,validationError:`Please check your input`,printerConnectionFailed:`Failed to connect to printer`,saveFailed:`Failed to save changes`,deleteFailed:`Failed to delete`,loadFailed:`Failed to load data`},hmsErrors:{title:`Errors - {{name}}`,noErrors:`No errors`,viewOnWiki:`View on Bambu Lab Wiki`,clearInstructions:`Clear errors on the printer to dismiss them here.`,clearErrors:`Clear Errors`,clearSuccess:`HMS errors cleared`,clearFailed:`Failed to clear HMS errors`},mqttDebug:{title:`MQTT Debug Log`,searchPlaceholder:`Search topic or payload...`,noMessages:`No messages logged yet`,startLoggingHint:`Click "Start Logging" to begin capturing MQTT messages`,noMessagesMatch:`No messages match your filter`,adjustFilterHint:`Try adjusting your search or filter criteria`,incoming:`Incoming`,outgoing:`Outgoing`,loggingStopped:`Logging stopped`,loggingActive:`Logging active - messages will auto-refresh`,startLogging:`Start Logging`,stopLogging:`Stop Logging`,clearLog:`Clear Log`,topic:`Topic`,timestamp:`Timestamp`,direction:`Direction`,all:`All`},printerFiles:{title:`File Manager`,storageUsed:`Used:`,storageFree:`Free:`,filterPlaceholder:`Filter files...`,deleteButton:`Delete`,deleteFiles:`Delete {{count}} Files`,deleteFileConfirm:`Delete "{{name}}"? This cannot be undone.`,deleteFilesConfirm:`Delete {{count}} selected files? This cannot be undone.`,noFiles:`No files on printer`,loadingFiles:`Loading files...`,failedToLoad:`Failed to load files`,toast:{filesDeleted:`Deleted {{count}} file(s)`,deleteFailed:`Delete failed: {{error}}`}},confirm:{delete:`Are you sure you want to delete this?`,unsavedChanges:`You have unsaved changes. Are you sure you want to leave?`,clearQueue:`Are you sure you want to clear the queue?`},login:{title:`Bambuddy Login`,subtitle:`Sign in to your account`,username:`Username`,usernamePlaceholder:`Enter your username`,usernameOrEmail:`Username or Email`,usernameOrEmailPlaceholder:`Username or @ Email`,password:`Password`,passwordPlaceholder:`Enter your password`,signIn:`Sign in`,signingIn:`Logging in...`,rememberMe:`Remember Me`,forgotPassword:`Forgot your password?`,loginSuccess:`Logged in successfully`,loginFailed:`Login failed`,enterCredentials:`Please enter username and password`,enterEmail:`Please enter your email address`,oidcLoginFailed:`OIDC login failed`,oidcErrors:{providerError:`The identity provider returned an error`,missingParameters:`OIDC callback is missing required parameters`,invalidState:`OIDC state is invalid or has already been used`,stateExpired:`OIDC login session expired — please try again`,providerNotFound:`OIDC provider not found`,discoveryFailed:`Failed to fetch OIDC discovery document`,invalidDiscovery:`OIDC discovery document is invalid`,networkError:`Network error during OIDC token exchange`,badResponse:`Unexpected response during OIDC token exchange`,noIdToken:`OIDC provider did not return an ID token`,validationFailed:`OIDC token validation failed`,nonceMismatch:`OIDC nonce mismatch — possible replay attack`,missingSubClaim:`OIDC token is missing the sub claim`,noLinkedAccount:`No local account is linked to this OIDC identity`,accountInactive:`Your account is inactive`,userResolutionFailed:`Failed to resolve your account`,internalError:`An internal error occurred during OIDC login`,tokenExchangeFailed:`OIDC token exchange failed`},forgotPasswordTitle:`Forgot Password`,forgotPasswordMessage:`If you've forgotten your password, please contact your system administrator to reset it.`,forgotPasswordEmailMessage:`Enter your email address and we'll send you a new password.`,emailAddress:`Email Address`,emailPlaceholder:`your.email@example.com`,cancel:`Cancel`,sending:`Sending...`,sendResetEmail:`Send Reset Email`,howToReset:`How to reset your password:`,resetStep1:`Contact your Bambuddy administrator`,resetStep2:`Ask them to reset your password in User Management`,resetStep3:`They can set a new temporary password for you`,resetStep4:`Log in with the new password and change it in Settings`,gotIt:`Got it`,resetPassword:{title:`Set New Password`,subtitle:`Enter and confirm your new password below.`,newPassword:`New Password`,newPasswordPlaceholder:`At least 8 characters`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Repeat new password`,saving:`Saving…`,submit:`Set New Password`,backToLogin:`Back to login`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 8 characters`,resetFailed:`Password reset failed. The link may have expired.`},twoFA:{title:`Two-Factor Authentication`,subtitle:`Your account is protected with 2FA. Enter the verification code below.`,methodAuthenticator:`Authenticator App`,methodEmail:`Email Code`,methodBackup:`Backup Code`,instructionsTotp:`Open your authenticator app and enter the 6-digit code for Bambuddy.`,instructionsEmail:`A 6-digit code has been sent to your email address. It expires in 10 minutes.`,instructionsEmailNotSent:`Click the button below to receive a verification code via email.`,instructionsBackup:`Enter one of your 8-character backup recovery codes. Each code can only be used once.`,sendCodeButton:`Send Code via Email`,sendingCode:`Sending...`,resendCode:`Resend code`,codeLabel:`Verification Code`,backupCodeLabel:`Backup Code`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Verify`,verifyingButton:`Verifying...`,backToLogin:`← Back to login`,orContinueWith:`or continue with`,signInWith:`Sign in with {{provider}}`,enterCode:`Please enter the verification code`,sendCodeFailed:`Failed to send verification code`,invalidCode:`Invalid code. Please try again.`}},setup:{title:`Bambuddy Setup`,subtitle:`Configure authentication for your Bambuddy instance`,enableAuth:`Enable Authentication`,adminAccount:`Admin Account`,adminAccountDesc:`If admin users already exist, authentication will be enabled using the existing admin accounts. Leave the fields below empty to use existing admins, or enter new credentials to create a new admin user.`,adminUsername:`Admin Username`,adminPassword:`Admin Password`,optionalIfAdminExists:`(optional if admin users exist)`,adminUsernamePlaceholder:`Enter admin username (optional)`,adminPasswordPlaceholder:`Enter admin password (optional)`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Confirm admin password`,settingUp:`Setting up...`,completeSetup:`Complete Setup`,toast:{authEnabledAdminCreated:`Authentication enabled and admin user created`,authEnabledExistingAdmins:`Authentication enabled using existing admin users`,setupCompleted:`Setup completed`,enterBothCredentials:`Please enter both admin username and password, or leave both empty to use existing admin users`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 6 characters`}},changePassword:{title:`Change Password`,currentPassword:`Current Password`,currentPasswordPlaceholder:`Enter current password`,newPassword:`New Password`,newPasswordPlaceholder:`Enter new password (min 6 characters)`,confirmPassword:`Confirm New Password`,confirmPasswordPlaceholder:`Confirm new password`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 6 characters`,changing:`Changing...`,success:`Password changed successfully`,failed:`Failed to change password`},plateAlert:{title:`Print Paused!`,message:`Objects detected on build plate. The print has been automatically paused. Please clear the plate and resume the print.`,understand:`I Understand`},camera:{title:`Camera View`,invalidPrinterId:`Invalid printer ID`,live:`Live`,snapshot:`Snapshot`,restartStream:`Restart stream`,refreshSnapshot:`Refresh snapshot`,fullscreen:`Fullscreen`,exitFullscreen:`Exit fullscreen`,connectingToCamera:`Connecting to camera...`,capturingSnapshot:`Capturing snapshot...`,connectionLost:`Connection lost`,connectionFailed:`Camera connection failed`,reconnecting:`Reconnecting in {{countdown}}s... (attempt {{attempt}}/{{max}})`,reconnectNow:`Reconnect now`,cameraUnavailable:`Camera unavailable`,cameraUnavailableDesc:`Make sure the printer is powered on and connected.`,noCamera:`No camera available`,retry:`Retry`,cameraStream:`Camera stream`,zoomOut:`Zoom out`,zoomIn:`Zoom in`,resetZoom:`Reset zoom`,recording:`Recording`,startRecording:`Start Recording`,stopRecording:`Stop Recording`,chamberLight:`Toggle chamber light`,unavailable:`Camera unavailable`,diagnose:{button:`Diagnose`,modalTitle:`Camera diagnostic`,running:`Running diagnostic...`,runFailed:`Diagnostic could not run: {{error}}`,retry:`Run again`,stage:{tcp_reachable:`Network reachability`,first_frame:`Frame capture`,live_stream_active:`Live stream active`},summary:{all_ok:`Camera is working. The diagnostic completed all stages successfully.`,live_stream_active_healthy:`Camera is currently streaming with recent frames — no test needed.`,printer_unreachable:`Printer is not reachable. Check the IP address, network connection, and that the printer is powered on.`,camera_port_closed:`Printer is reachable but the camera port is closed. Make sure LAN-only mode and Developer Mode are enabled in the printer settings.`,no_frame:`Connected to the camera but no frames were received. Try again, or check that the camera is enabled in the printer settings.`,unknown_failure:`Camera diagnostic failed for an unknown reason. Check the support log for details.`},meta:{protocol:`Protocol`,port:`Port`,profile:`Profile`}}},groups:{title:`Group Management`,subtitle:`Manage permission groups for access control`,backToSettings:`Back to Settings`,createGroup:`Create Group`,noPermission:`You do not have permission to access this page.`,system:`System`,noDescription:`No description`,usersCount:`{{count}} users`,permissionsCount:`{{count}} permissions`,edit:`Edit`,delete:`Delete`,toast:{created:`Group created successfully`,updated:`Group updated successfully`,deleted:`Group deleted successfully`,enterGroupName:`Please enter a group name`},modal:{editGroup:`Edit Group`,createGroup:`Create Group`,cancel:`Cancel`,saving:`Saving...`,creating:`Creating...`,saveChanges:`Save Changes`},form:{groupName:`Group Name`,groupNamePlaceholder:`Enter group name`,systemGroupWarning:`System group names cannot be changed`,description:`Description`,descriptionPlaceholder:`Enter description (optional)`,permissions:`Permissions ({{count}} selected)`},deleteModal:{title:`Delete Group`,message:`Are you sure you want to delete this group? Users in this group will lose these permissions.`,confirm:`Delete Group`},editor:{title:`Edit Group`,createTitle:`Create Group`,search:`Search permissions...`,selectAll:`Select All`,clearAll:`Clear All`,permissionsSelected:`{{count}} selected`,noResults:`No permissions match your search`}},users:{title:`User Management`,subtitle:`Manage users and their access to your Bambuddy instance`,backToSettings:`Back to Settings`,createUser:`Create User`,noPermission:`You do not have permission to access this page.`,admin:`Admin`,noGroups:`No groups`,active:`Active`,inactive:`Inactive`,edit:`Edit`,delete:`Delete`,system:`System`,noGroupsAvailable:`No groups available`,table:{username:`Username`,groups:`Groups`,status:`Status`,actions:`Actions`},toast:{created:`User created successfully`,updated:`User updated successfully`,deleted:`User deleted successfully`,fillRequired:`Please fill in all required fields`,passwordsDoNotMatch:`Passwords do not match`,passwordTooShort:`Password must be at least 6 characters`,ldapProvisioned:`Provisioned LDAP user "{{username}}"`},modal:{createUser:`Create User`,editUser:`Edit User`,cancel:`Cancel`,creating:`Creating...`,saving:`Saving...`,saveChanges:`Save Changes`,advancedAuthSubtitle:`with Advanced Authentication`,tabsAriaLabel:`User source`,localTab:`Local`,ldapTab:`LDAP`,ldapSearchLabel:`Search directory`,ldapSearchPlaceholder:`Type a username, name, or email...`,ldapMinChars:`Type at least 2 characters to search`,ldapTypeToSearch:`Start typing to search the LDAP directory`,ldapSearching:`Searching directory...`,ldapNoResults:`No matching users in the directory`,ldapSearchError:`Directory search failed. Check the LDAP server status.`,ldapAlreadyProvisioned:`Already provisioned`,ldapSelectedLabel:`Selected`,ldapProvision:`Provision user`,ldapProvisioning:`Provisioning...`,ldapErrorProvision:`Provisioning failed. Check the LDAP server status and try again.`},form:{username:`Username`,usernamePlaceholder:`Enter username`,email:`Email`,emailPlaceholder:`user@example.com`,password:`Password`,passwordPlaceholder:`Enter password`,confirmPassword:`Confirm Password`,confirmPasswordPlaceholder:`Confirm password`,newPasswordPlaceholder:`Enter new password`,confirmNewPasswordPlaceholder:`Confirm new password`,leaveBlankToKeep:`leave blank to keep current`,groups:`Groups`,optional:`optional`,autoGeneratedPassword:`A secure password will be automatically generated and emailed to the user.`,passwordManagedByAdvancedAuth:`Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.`,resetPassword:`Reset Password`,resettingPassword:`Resetting Password...`},deleteModal:{title:`Delete User`,message:`Are you sure you want to delete this user? This action cannot be undone.`,confirm:`Delete User`}},streamOverlay:{title:`Stream Overlay`,invalidPrinterId:`Invalid printer ID`,cameraStream:`Camera stream`,progress:`Progress`,eta:`ETA`,printerIdle:`Printer is idle`,printerOffline:`Printer offline`,status:{printing:`Printing`,paused:`Paused`,finished:`Finished`,failed:`Failed`,idle:`Idle`,unknown:`Unknown`}},profiles:{title:`Profiles`,subtitle:`Manage your slicer presets and pressure advance calibrations`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Local Profiles`,kprofiles:`K-Profiles`},orcaCloud:{connectedAs:`Connected as`,logout:`Disconnect`,noLogoutPermission:`You do not have permission to disconnect`,noConnectPermission:`You do not have permission to connect to Orca Cloud`,retry:`Retry`,back:`Use a different sign-in method`,connect:{title:`Connect to Orca Cloud`,description:`Sign in to your Orca Cloud account to sync your slicer profiles into Bambuddy.`},providers:{google:`Sign in with Google`,apple:`Sign in with Apple`,github:`Sign in with GitHub`,email:`Sign in with email and password`},password:{title:`Sign in with email and password`,email:`Email`,emailPlaceholder:`you@example.com`,password:`Password`,submit:`Sign in`},paste:{title:`Finish signing in`,step1:`A new tab opened with the Orca Cloud sign-in page. Sign in with your Orca account.`,step2:`Your browser will be redirected to a "localhost" URL that fails to load. That is expected — the URL is what we need.`,step3:`Copy the entire URL from your browser's address bar and paste it below.`,signInUrl:`If the sign-in tab did not open, click this URL:`,label:`Paste the callback URL here`,placeholder:`http://localhost:41172/callback?code=...&state=...`,submit:`Finish connecting`},profiles:{title:`Your Orca Cloud profiles ({{count}})`,refresh:`Refresh`,empty:`No profiles found in your Orca Cloud account yet.`},toast:{connected:`Connected to Orca Cloud as {{email}}`,disconnected:`Disconnected from Orca Cloud`},errors:{startFailed:`Could not start the Orca Cloud sign-in flow.`,finishFailed:`Could not finish the Orca Cloud sign-in.`,passwordFailed:`Could not sign in with that email and password.`,passwordEmpty:`Please enter both your email and password.`,emptyPaste:`Please paste the callback URL from your browser.`,noCode:`That URL does not look like an Orca Cloud callback (no code parameter). Copy the full URL from your address bar.`}},localProfiles:{title:`Local Profiles`,subtitle:`Import and manage slicer presets from OrcaSlicer`,import:`Import Profiles`,importDesc:`Drop .bbscfg, .bbsflmt, .orca_filament, .zip, or .json files here`,importing:`Importing...`,search:`Search local presets...`,noPresets:`No local presets yet`,noSearchResults:`No presets match your search`,badge:`Local`,edit:`Edit`,delete:`Delete`,cancel:`Cancel`,deleteConfirmTitle:`Delete Preset`,deleteConfirm:`Are you sure you want to delete this preset? This cannot be undone.`,source:`Source`,inheritsFrom:`Inherits`,filamentType:`Type`,vendor:`Vendor`,compatiblePrinters:`Printers`,nozzleTemp:`Nozzle Temp`,cost:`Cost`,density:`Density`,pressureAdvance:`Pressure Advance`,filament:`Filament`,process:`Process`,printer:`Printer`,toast:{importSuccess:`{{count}} preset(s) imported`,importSkipped:`{{count}} preset(s) skipped (duplicates)`,importError:`{{count}} error(s) during import`,deleted:`Preset deleted`,updated:`Preset updated`}},connectedAs:`Connected as`,logout:`Logout`,noLogoutPermission:`You do not have permission to logout`,failedToLoad:`Failed to load profiles`,retry:`Retry`,time:{justNow:`Just now`,minsAgo:`{{count}}m ago`,hoursAgo:`{{count}}h ago`,daysAgo:`{{count}}d ago`},toast:{loggedOut:`Logged out`},login:{title:`Connect to Bambu Cloud`,subtitle:`Sync your slicer presets across devices`,email:`Email`,password:`Password`,region:`Region`,regionGlobal:`Global`,regionChina:`China`,verificationCode:`Verification Code`,totpCode:`Authenticator Code`,checkEmail:`Check your email ({{email}}) for a 6-digit code`,enterTotpHint:`Enter the 6-digit code from your authenticator app`,accessToken:`Access Token`,accessTokenHint:`Paste your Bambu Cloud access token. China-region accounts must use this path (phone-bound — email login unavailable). See the wiki for how to retrieve the token from MakerWorld cookies.`,back:`Back`,loginButton:`Login`,verifyButton:`Verify`,setTokenButton:`Set Token`,useToken:`Use access token instead`,useEmail:`Login with email instead`,toast:{loggedIn:`Logged in successfully`,codeSent:`Verification code sent to your email`,enterTotp:`Enter code from your authenticator app`,tokenSet:`Token set successfully`}},presets:{myPreset:`My preset (editable)`,duplicate:`Duplicate`,editable:`Editable`,failedToLoadDetails:`Failed to load preset details`,deleteConfirm:`Delete this preset?`,deleteWarning:`This will permanently delete "{{name}}" from Bambu Cloud. This cannot be undone.`,noDuplicatePermission:`You do not have permission to duplicate presets`,noEditPermission:`You do not have permission to edit presets`,noDeletePermission:`You do not have permission to delete presets`,types:{filament:`Filament preset`,printer:`Printer preset`,process:`Process preset`},toast:{deleted:`Preset deleted`,created:`Preset created`,updated:`Preset updated`,duplicated:`Preset duplicated`,fieldAdded:`Field "{{key}}" added`,exported:`Preset exported`},baseLabel:`Base: {{name}}`,currentLabel:`Current: {{name}}`,newPreset:`New Preset`,editPreset:`Edit Preset`,duplicatePreset:`Duplicate Preset`,createNewPreset:`Create New Preset`,customizeSettings:`Customize settings for your new preset`,compareWithBase:`Compare with base preset`,compare:`Compare`,basePreset:`Base Preset`,selectBasePreset:`Select base preset...`,presetName:`Preset Name`,myCustomPreset:`My custom preset`,inheritsFrom:`Inherits from`,dropJsonToImport:`Drop JSON to import`,tabs:{common:`Common`,allFields:`All Fields`},availableFields:`Available Fields`,searchFieldsPlaceholder:`Search fields...`,noMatchingFields:`No matching fields`,allFieldsAdded:`All fields added`,addCustomField:`Add custom field`,yourOverrides:`Your Overrides`,noOverridesYet:`No overrides yet`,clickFieldsToAdd:`Click fields on the left to add them`,saveAsTemplate:`Save as template`,jsonTip:`Tip: Drag & drop a .json file anywhere on this modal to import settings`},cloudView:{searchPlaceholder:`Search presets...`,templates:`Templates`,refresh:`Refresh`,newPreset:`New Preset`,clearFilters:`Clear filters`,compareMode:`Compare Mode`,selectAnotherPreset:`Select another {{type}} preset`,clickTwoPresets:`Click two presets of the same type to compare`,selectFirst:`1. Select first`,selectSecond:`2. Select second`,compareNow:`Compare Now`,lastSynced:`Last synced:`,showingCount:`Showing {{showing}} of {{total}} presets`,noPresetsFound:`No presets found`,columns:{filament:`Filament`,process:`Process`,printer:`Printer`},noFilamentPresets:`No filament presets`,noProcessPresets:`No process presets`,noPrinterPresets:`No printer presets`,filters:{type:`Type`,owner:`Owner`,printer:`Printer`,nozzle:`Nozzle`,filament:`Filament`,layer:`Layer`,all:`All`,myPresets:`My Presets`,builtIn:`Built-in`,process:`Process`},noTemplatesPermission:`You do not have permission to manage templates`,noRefreshPermission:`You do not have permission to refresh profiles`,noCreatePermission:`You do not have permission to create presets`},templates:{title:`Quick Templates`,noTemplates:`No templates yet`,createFirst:`Create templates from the preset editor`,typeFilter:`Type:`,deleteTitle:`Delete Template`,deleteWarning:`This action cannot be undone`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,namePlaceholder:`Template name`,descriptionPlaceholder:`Description`,settingsJson:`Settings (JSON)`,fieldsCount:`{{count}} fields`,shownInModals:`Shown in modals`,hiddenInModals:`Hidden in modals`,apply:`Apply`,toast:{deleted:`Template deleted`,updated:`Template updated`,created:`Template created`,applied:`Template applied`}}},support:{debugLoggingActive:`Debug logging is active`,manageLogs:`Manage`,collectItem7:`Printer connectivity and firmware versions`,collectItem8:`Integration status (Spoolman, MQTT, HA)`,collectItem9:`Network interfaces (subnets only)`,collectItem10:`Python package versions`,collectItem11:`Database health checks`,collectItem12:`Docker environment details`,bundleGenerating:`Generating bundle...`,bundleStepConnection:`Running printer connectivity checks`,bundleStepVirtualPrinters:`Running virtual-printer setup checks`,bundleStepLogScan:`Scanning recent logs for known issues`,bundleStepBuild:`Building the support bundle ZIP`},fileManager:{title:`File Manager`,subtitle:`Organize and manage your print files`,uploadFiles:`Upload Files`,newFolder:`New Folder`,folderName:`Folder Name`,folderNamePlaceholder:`e.g., Functional Parts`,renameFile:`Rename File`,renameFolder:`Rename Folder`,invalidFilenameChar:`The character "{{char}}" is not allowed in print filenames. The printer SD card rejects: < > : " / \\ | ? *`,moveFiles:`Move {{count}} File(s)`,rootNoFolder:`Root (No Folder)`,current:`current`,linkFolder:`Link Folder`,linkFolderDescription:`Link "{{name}}" to a project or archive for quick access.`,project:`Project`,archive:`Archive`,noProjectsFound:`No projects found`,noArchivesFound:`No archives found`,unlink:`Unlink`,link:`Link`,dragDropFiles:`Drag & drop files here`,dropFilesHere:`Drop files here`,releaseToUpload:`Release to upload`,orClickToBrowse:`or click to browse`,allFileTypesSupported:`All file types supported. ZIP files will be extracted.`,zipFilesDetected:`ZIP files detected`,zipExtractOptions:`ZIP files will be extracted. Choose how to handle folder structure:`,preserveZipStructure:`Preserve folder structure from ZIP`,createFolderFromZip:`Create folder from ZIP filename`,stlThumbnailGeneration:`STL thumbnail generation`,zipMayContainStl:`ZIP files may contain STL files. Thumbnails can be generated during extraction.`,thumbnailsCanBeGenerated:`Thumbnails can be generated for STL files. Large models may take longer to process.`,generateThumbnailsForStl:`Generate thumbnails for STL files`,threemfDetected:`3MF files detected`,threemfExtractionInfo:`Printer model, material, color, and print settings will be automatically extracted from 3MF files.`,willBeExtracted:`Will be extracted`,filesExtracted:`{{count}} files extracted`,uploadComplete:`Upload complete: {{succeeded}} succeeded`,uploadFailed:`Upload failed`,zipFilesFailed:`{{count}} files failed`,uploading:`Uploading...`,changeLink:`Change Link...`,linkTo:`Link to...`,linkToProjectOrArchive:`Link to project or archive`,addToQueue:`Add to Queue`,schedulePrint:`Schedule`,generateThumbnail:`Generate Thumbnail`,generateThumbnails:`Generate Thumbnails`,generateThumbnailsForMissing:`Generate thumbnails for STL files missing them`,gridView:`Grid view`,listView:`List view`,lowDiskSpaceWarning:`Low disk space warning`,lowDiskSpaceDetails:`Only {{free}} free of {{total}} total. Threshold is set to {{threshold}} GB in settings.`,files:`Files`,folders:`Folders`,size:`Size`,free:`Free`,allFiles:`All Files`,allExternal:`External`,externalIsEmpty:`No external files`,externalEmptyDescription:`Files in your linked external folders will appear here.`,wrap:`Wrap`,enableTextWrapping:`Enable text wrapping`,disableTextWrapping:`Disable text wrapping`,collapse:`Collapse`,collapseFoldersByDefault:`Collapse folders by default`,expandFoldersByDefault:`Expand folders by default`,folderSort:`Sort folders`,folderSortByName:`By name`,folderSortByActivity:`By recent activity`,dragToResizeTooltip:`Drag to resize, double-click to reset`,searchFiles:`Search files...`,searchSubfoldersHint:`Including subfolders`,readme:{truncated:`Truncated`},tags:{title:`Tags`,subtitle:`Label files for cross-cutting filtering — toys, kid-safe, PETG-only, anything.`,manage:`Tags`,manageTitle:`Manage tag catalog`,add:`New tag`,edit:`Rename tag`,name:`Name`,fileCount:`Files`,empty:`No tags yet. Create one to start labelling files.`,noMatches:`No matching tags.`,createPlaceholder:`e.g. toys, kid-safe, petg`,createButton:`Create`,nameRequired:`Name is required.`,searchPlaceholder:`Filter tags...`,created:`Tag created.`,updated:`Tag renamed.`,deleted:`Tag removed.`,saveFailed:`Could not save tag.`,deleteFailed:`Could not remove tag.`,applyFailed:`Could not apply tags.`,applyAdd:`Add tags`,applyRemove:`Remove tags`,applyAddSuccess:`Added {{count}} tag(s) across {{files}} file(s).`,applyRemoveSuccess:`Removed {{count}} tag(s) across {{files}} file(s).`,actionAdd:`Add to selected files`,actionRemove:`Remove from selected files`,tagAction:`Tag`,bulkTitle:`Tag {{count}} selected file(s)`,bulkTooltip:`Add or remove tags on every selected file.`,noPermission:`You do not have permission to tag files.`,filterLabel:`Filtering by:`,clearAll:`Clear all`,confirmDelete:`Delete tag "{{name}}"?`,confirmDeleteMessage:`This removes the tag from the catalog. Files keep their other tags.`,confirmDeleteInUseMessage:`This tag is on {{count}} file(s). Deleting removes the chip from all of them; files themselves are untouched.`,editAria:`Edit {{name}}`,deleteAria:`Delete {{name}}`},allTypes:`All types`,prints:`Prints`,ascending:`Ascending`,descending:`Descending`,resultsCount:`{{showing}} of {{total}} files`,selectAll:`Select All`,deselectAll:`Deselect All`,selected:`{{count}} selected`,adding:`Adding...`,loadingFiles:`Loading files...`,folderIsEmpty:`Folder is empty`,noFilesYet:`No files yet`,folderEmptyDescription:`Upload files or move files into this folder to get started.`,noFilesDescription:`Upload files to start organizing your print-related files.`,noMatchingFiles:`No matching files`,noMatchingFilesDescription:`No files match your current search or filter criteria.`,clearFilters:`Clear filters`,printedCount:`Printed {{count}}x`,uploadedBy:`Uploaded By`,deleteFolder:`Delete Folder`,deleteFile:`Delete File`,deleteFilesCount:`Delete {{count}} Files`,deleteFolderConfirm:`Are you sure you want to delete this folder? All files inside will also be deleted.`,deleteFileConfirm:`Are you sure you want to delete this file?`,deleteFilesConfirm:`Are you sure you want to delete {{count}} selected files? This action cannot be undone.`,deleting:`Deleting...`,noPermissionRenameFolder:`You do not have permission to rename folders`,noPermissionLinkFolder:`You do not have permission to link folders`,noPermissionDeleteFolder:`You do not have permission to delete folders`,noPermissionPrint:`You do not have permission to print`,noPermissionAddToQueue:`You do not have permission to add to queue`,noPermissionSlice:`You do not have permission to slice files`,noPermissionDownload:`You do not have permission to download files`,noPermissionRenameFile:`You do not have permission to rename this file`,noPermissionGenerateThumbnail:`You do not have permission to generate thumbnails`,noPermissionDeleteFile:`You do not have permission to delete this file`,noPermissionCreateFolder:`You do not have permission to create folders`,noPermissionUpload:`You do not have permission to upload files`,noPermissionMoveFiles:`You do not have permission to move files`,noPermissionDeleteFiles:`You do not have permission to delete files`,linkExternal:`Link External`,linkExternalFolder:`Link External Folder`,linkExternalFolderDescription:`Mount a host directory (NAS, USB, network share) into the File Manager. Files are not copied — they are accessed directly from the original path.`,externalFolderNamePlaceholder:`e.g., NAS Prints`,externalPath:`Host Path`,externalPathHelp:`Absolute path to the directory on the Docker host. Must be bind-mounted into the container.`,readOnly:`Read Only`,readOnlyHelp:`prevents uploads and deletions`,showHiddenFiles:`Show hidden files (dotfiles)`,externalFolder:`External Folder`,scanFolder:`Scan`,toast:{folderCreated:`Folder created`,folderDeleted:`Folder deleted`,fileDeleted:`File deleted`,filesDeleted:`Deleted {{count}} files`,filesMoved:`Files moved`,folderLinked:`Folder linked`,folderUnlinked:`Folder unlinked`,externalFolderLinked:`External folder linked and scanned`,folderScanned:`Scan complete: {{added}} added, {{removed}} removed`,addedToQueue:`Added {{count}} file(s) to queue`,addedToQueuePartial:`Added {{added}} file(s), {{failed}} failed`,failedToAddToQueue:`Failed to add files: {{error}}`,fileRenamed:`File renamed`,folderRenamed:`Folder renamed`,thumbnailsGenerated:`Generated {{count}} thumbnail(s)`,thumbnailsGeneratedPartial:`Generated {{succeeded}} thumbnail(s), {{failed}} failed`,noStlMissingThumbnails:`No STL files missing thumbnails`,failedToGenerateThumbnails:`Failed to generate thumbnails: {{error}}`,thumbnailGenerated:`Thumbnail generated`,failedToGenerateThumbnail:`Failed to generate thumbnail: {{error}}`}},projects:{title:`Projects`,subtitle:`Organize and track your 3D printing projects`,newProject:`New Project`,editProject:`Edit Project`,deleteProject:`Delete Project`,projectName:`Project Name`,description:`Description`,noProjects:`No projects yet`,noProjectsFiltered:`No {{status}} projects`,noProjectsFilteredHelp:`You don't have any {{status}} projects. Projects will appear here when their status changes.`,createFirst:`Create your first project to start organizing related prints, tracking progress, and managing your builds.`,createFirstButton:`Create Your First Project`,create:`Create`,files:`Files`,prints:`Prints`,plates:`plates`,parts:`parts`,lastModified:`Last Modified`,deleteConfirm:`Are you sure you want to delete this project? Archives and queue items will be unlinked but not deleted.`,addFiles:`Add Files`,removeFile:`Remove File`,viewDetails:`View Details`,namePlaceholder:`e.g., Voron 2.4 Build`,descriptionPlaceholder:`Optional description...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL must start with http:// or https://`,openExternalUrl:`Open project URL`,coverImageLabel:`Cover photo`,coverImageAlt:`Project cover photo`,coverImageUpload:`Upload`,coverImageReplace:`Replace`,coverImageRemove:`Remove`,color:`Color`,targetPlates:`Target Plates`,targetPlatesPlaceholder:`e.g., 25`,targetPlatesHelp:`Number of print jobs`,targetParts:`Target Parts`,targetPartsPlaceholder:`e.g., 150`,targetPartsHelp:`Total objects needed`,tagsLabel:`Tags (comma-separated)`,tagsPlaceholder:`e.g., voron, functional, gift`,dueDate:`Due Date`,priority:`Priority`,priorityLow:`Low`,priorityNormal:`Normal`,priorityHigh:`High`,priorityUrgent:`Urgent`,statusActive:`Active`,statusCompleted:`Completed`,statusArchived:`Archived`,done:`Done`,completed:`completed`,failed:`failed`,inQueue:`in queue`,noPrintsYet:`No prints yet`,printJobs:`Print jobs (plates)`,partsPrinted:`Parts printed`,failedParts:`Failed parts`,import:`Import`,export:`Export`,importProject:`Import project`,exportAll:`Export all projects`,loading:`Loading projects...`,noEditPermission:`You do not have permission to edit projects`,noDeletePermission:`You do not have permission to delete projects`,noCreatePermission:`You do not have permission to create projects`,noImportPermission:`You do not have permission to import projects`,noExportPermission:`You do not have permission to export projects`,toast:{created:`Project created`,updated:`Project updated`,deleted:`Project deleted`,imported:`Project imported`,multipleImported:`{{count}} projects imported`,importFailed:`Import failed`,exported:`Projects exported (metadata only)`}},projectDetail:{notFound:`Project not found`,backToProjects:`Back to Projects`,export:`Export`,exportProject:`Export project`,noExportPermission:`You do not have permission to export projects`,noEditPermission:`You do not have permission to edit projects`,partOf:`Part of:`,priorityLabel:`Priority:`,noPrints:`No prints in this project yet`,status:{active:`Active`,completed:`Completed`,archived:`Archived`},priority:{low:`Low`,normal:`Normal`,high:`High`,urgent:`Urgent`},dueDate:{overdue:`Overdue`,today:`Due today`,daysLeft:`{{count}} days left`},progress:{platesProgress:`Plates Progress`,partsProgress:`Parts Progress`,printJobs:`print jobs`,parts:`parts`,percentComplete:`{{percent}}% complete`,remaining:`{{count}} remaining`},stats:{printJobs:`Print Jobs`,total:`total`,failed:`{{count}} failed`,partsPrinted:`{{count}} parts printed`,printTime:`Print Time`,filamentUsed:`Filament Used`},cost:{title:`Cost Tracking`,filamentCost:`Filament Cost`,energy:`Energy`,totalCost:`Total Cost`,total:`Total`,includesBom:`incl. BOM`,budget:`Budget`,remaining:`Remaining`},subProjects:{title:`Sub-projects ({{count}})`},notes:{title:`Notes`,noEditPermission:`You do not have permission to edit notes`,placeholder:`Add notes about this project...`,empty:`No notes yet. Click Edit to add notes.`},files:{title:`Files`,linkFolders:`Link folders from the File Manager`,forQuickAccess:`to this project for quick access.`,fileCount:`{{count}} file(s)`,empty:`No folders linked. Go to File Manager and link a folder to this project.`,noFiles:`No files in this folder.`,print:`Print Now`,addToQueue:`Add to Queue`},bom:{title:`Bill of Materials`,acquired:`{{completed}}/{{total}} acquired`,showAll:`Show all`,hideDone:`Hide done`,addPart:`Add Part`,noAddPermission:`You do not have permission to add parts`,partNamePlaceholder:`Part name (e.g., M3x8 screws)`,partName:`Part name`,qty:`Qty`,price:`Price ({{currency}})`,sourcingUrlPlaceholder:`Sourcing URL (optional)`,remarksPlaceholder:`Remarks (optional)`,deletePart:`Delete Part`,deleteConfirm:`Are you sure you want to delete "{{name}}"?`,noUpdatePermission:`You do not have permission to update parts`,noEditPermission:`You do not have permission to edit parts`,noDeletePermission:`You do not have permission to delete parts`,totalCost:`Total cost:`,empty:`No parts in the bill of materials. Add hardware, electronics, or other components to track what needs to be sourced.`},timeline:{title:`Activity Timeline`,empty:`No activity yet.`},template:{saveAsTemplate:`Save as Template`,noCreatePermission:`You do not have permission to create templates`},queue:{title:`Queue`,viewAll:`View all`,printing:`{{count}} printing`,queued:`{{count}} queued`},prints:{title:`Prints ({{count}})`},toast:{projectUpdated:`Project updated`,partAdded:`Part added`,partRemoved:`Part removed`,exportFailed:`Export failed`,projectExported:`Project exported`,templateCreated:`Template created`}},system:{title:`System Information`,version:`Version`,uptime:`Uptime`,cpuUsage:`CPU Usage`,memoryUsage:`Memory Usage`,diskUsage:`Disk Usage`,networkInfo:`Network Info`,logs:`Logs`,debugMode:`Debug Mode`,enableDebug:`Enable Debug Logging`,disableDebug:`Disable Debug Logging`,downloadLogs:`Download Logs`,clearLogs:`Clear Logs`,dockerInfo:`Docker Info`,containerName:`Container Name`,imageName:`Image Name`,platform:`Platform`,architecture:`Architecture`},sponsors:{sectionTitle:`Independent & community-funded`,tagline:`Bambuddy is free and stays that way because people choose to support it. No VC, no cloud lock-in.`,viewSupporters:`View supporters`,toastPrints:`You've completed {{count}} prints with Bambuddy. Bambuddy stays free thanks to its supporters.`,toastCost:`You've tracked {{total}} in filament with Bambuddy. See who keeps the project independent.`,toastArchives:`{{count}} prints archived with Bambuddy. See who keeps it independent.`,toastAnniversary:`One year with Bambuddy! See who keeps the project independent.`,toastVersionUpdate:`Updated to v{{version}}. Bambuddy stays free thanks to its supporters.`},library:{title:`Filament Library`,addFilament:`Add Filament`,editFilament:`Edit Filament`,deleteFilament:`Delete Filament`,vendor:`Vendor`,material:`Material`,color:`Color`,kFactor:`K Factor`,temperature:`Temperature`,noFilaments:`No filaments in library`,deleteConfirm:`Are you sure you want to delete this filament?`,importFromPrinter:`Import from Printer`,exportToFile:`Export to File`},slice:{title:`Slice model`,action:`Slice`,actionAll:`Slice all {{count}} plates`,actionAllTitle:`Slice every plate into one multi-plate output (single archive). Filament selection covers every slot the project defines.`,allPlatesToggle:`Slice all {{count}} plates`,slicing:`Slicing…`,printer:`Printer profile`,process:`Process profile`,filament:`Filament profile`,filamentSlot:`Filament {{index}} ({{type}})`,selectPreset:`— Select a preset —`,loadingPresets:`Loading presets…`,analyzingPlateFilaments:`Analyzing plate filaments…`,analyzingPlateFilamentsHint:`Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.`,previewToast:`Analyzing {{name}} — {{elapsed}}`,previewWithProgress:`Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— not used by this plate`,noPresetsForSlot:`No presets available`,otherPrinters:`Other printers`,presetsLoadFailed:`Failed to load presets. Open Settings → Profiles to import them first.`,refreshPresets:`Refresh`,refreshPresetsTitle:`Refresh presets — fetch the latest cloud and bundled listings (use after deleting a preset in Bambu Studio or Bambu Handy)`,allPresetsRequired:`All presets must be selected`,enqueuing:`Submitting slice job…`,queued:`Queued…`,failed:`Slicing failed. Check the slicer sidecar logs.`,startedToast:`Slicing {{name}} in the background…`,queuedToast:`Queued: {{name}} — {{elapsed}}`,runningToast:`Slicing {{name}} — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,runningWithProgressMultiPlate:`Plate {{plateIndex}} of {{plateCount}} • {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}`,completedToast:`Sliced {{name}}`,failedTitle:`Slicing failed`,failedToast:`Slicing {{name}} failed: {{detail}}`,tier:{local:`Imported`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`Sign in to Bambu Cloud (Settings → Profiles → Bambu Cloud) to see your cloud presets.`,expired:`Bambu Cloud session expired — sign in again to refresh your cloud presets.`,unreachable:`Bambu Cloud is unreachable right now. Local and standard presets still work.`},orcaCloud:{notAuthenticated:`Sign in to Orca Cloud (Profiles → Orca Cloud) to see your Orca presets.`,expired:`Orca Cloud session expired — sign in again to refresh your Orca presets.`,unreachable:`Orca Cloud is unreachable right now. Other presets still work.`},bedType:{label:`Build plate`,auto:`Auto (use process preset)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`}},spoolman:{title:`Spoolman Integration`,enabled:`Spoolman Enabled`,url:`Spoolman URL`,connected:`Connected`,disconnected:`Not Connected`,testConnection:`Test Connection`,sync:`Sync`,syncing:`Syncing...`,lastSync:`Last Sync`,linkToSpoolman:`Link to Spoolman`,openInSpoolman:`Open in Spoolman`,unlinkSpool:`Unlink Spool`,unlinkConfirmTitle:`Unassign Spool?`,unlinkConfirmMessage:`This will remove the spool from this slot. The spool data itself will remain unchanged.`,selectSpool:`Select Spool`,noUnlinkedSpools:`No unassigned spools available`,linkSuccess:`Spool assigned successfully`,linkFailed:`Failed to assign spool`,unlinkSuccess:`Spool unassigned successfully`,unlinkFailed:`Failed to unassign spool`,linkedSpool:`Assigned spool`,spoolId:`Spool ID`,fillSourceLabel:`(Spoolman)`,weight:`Weight`,remaining:`Remaining`,disableWeightSync:`Disable AMS Estimated Weight Sync`,disableWeightSyncDesc:`Don't update remaining capacity from AMS estimates. Use this if you prefer Spoolman's usage tracking over AMS percentage-based estimates. New spools will still use the AMS estimate as their initial weight.`,reportPartialUsage:`Report Partial Usage for Failed Prints`,reportPartialUsageDesc:`When a print fails or is cancelled, report the estimated filament used up to that point based on layer progress.`},locations:{title:`Storage Locations`,subtitle:`Manage shelves, drawers, and other physical storage spots for your spools`,add:`Add Location`,addShort:`Add`,edit:`Edit Location`,name:`Name`,spools:`Spools`,empty:`No storage locations yet. Create your first shelf or drawer.`,manage:`Locations`,createPlaceholder:`e.g. Shelf A, Drawer 1`,nameRequired:`Location name is required`,created:`Location created`,updated:`Location updated`,deleted:`Location deleted`,saveFailed:`Failed to save location`,deleteFailed:`Failed to delete location`,deleteBlocked:`Remove all spools from this location before deleting`,confirmDelete:`Delete "{{name}}"?`,confirmDeleteMessage:`This location will be removed from the catalog. Spools must be moved first.`},inventory:{title:`Spool Inventory`,subtitle:`Manage your spools`,spoolmanMixedContentTitle:`Spoolman can't load over HTTPS — mixed-content blocked by your browser`,spoolmanMixedContentBody:`Bambuddy is served over HTTPS (via your reverse proxy), but your Spoolman URL is still plain HTTP. Browsers block mixed content for security, so the embedded Spoolman UI can't render. Spoolman needs to be reachable over HTTPS for this to work.`,spoolmanMixedContentFixReverseProxy:`Put Spoolman behind the same reverse proxy as Bambuddy (Traefik / Nginx / Caddy) with HTTPS, then update the Spoolman URL in Settings to the new HTTPS address.`,spoolmanMixedContentFixOpenNewTab:`As a workaround, open Spoolman in a new browser tab over HTTP — mixed-content rules only apply to embedded frames, so a standalone tab still works.`,spoolmanOpenInNewTab:`Open Spoolman in a new tab`,labels:{title:`Print spool labels`,selectedCount:`{{count}} selected`,pickSpools:`Pick which spools to print labels for:`,searchPlaceholder:`Search name, brand, or #ID`,filterByMaterial:`Material:`,allMaterials:`All`,selectVisible:`Select all visible ({{count}})`,deselectVisible:`Deselect visible`,clearAll:`Clear all`,noSpoolsToShow:`No spools to show. Adjust your filter and try again.`,noMatches:`No spools match the current search or filter.`,printOne:`Print label for this spool`,printLabels:`Print labels…`,bulkTitle:`Pick spools to print labels for from the {{count}} currently shown`,noSpoolsTitle:`No spools to label`,error:`Could not generate labels: {{msg}}`,sortBy:{label:`Sort:`,id:`By ID`,color:`By colour`},templates:{amsHolderSmall:{label:`AMS holder — small (74 × 33 mm)`,hint:`Single label per page; matches the printable label from MakerWorld model 752566 (AMS Filament Label Holder).`},amsHolderLarge:{label:`AMS holder — large (75 × 55 mm)`,hint:`Single label per page; fits the cardstock-insert variant of the AMS Filament Label Holder. Roomy enough for swatch, brand, material, ID, and QR code.`},box40x30:{label:`Box label (40 × 30 mm)`,hint:`Single label per page; common DK/Brother roll size, good for filament-bag and storage-bin labels.`},box:{label:`Box label (62 × 29 mm)`,hint:`Single label per page; sized for Brother PT/QL and Dymo small labels.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`EU sheet stock; 21 labels per A4 page.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`US sheet stock; 30 labels per Letter page.`}}},csv:{importButton:`Import CSV`,exportButton:`Export CSV`,modalTitle:`Import spools from CSV`,selectFile:`Choose a CSV file or drag it here`,dragHint:`Header: material (required), brand, subtype, color_name, rgba, …`,parsing:`Reading file…`,previewError:`Could not read the CSV file`,validCount:`{{count}} valid`,errorCount:`{{count}} error`,skippedCount:`{{count}} skipped`,colRow:`Row`,colStatus:`Status`,colColor:`Color`,colorResolved:`Color filled from catalog`,colorCrossMaterial:`Color taken from a different material — no exact match in catalog`,duplicateExisting:`A spool with this material, brand and color already exists — it will still be imported as a new spool`,spoolmanHint:`In Spoolman mode, use Spoolman's built-in CSV import/export.`,importValidRows:`Import {{count}} valid rows`,noValidRows:`No valid rows`,importing:`Importing…`,importSuccess:`{{count}} spools imported`,importError:`Import failed`,exportError:`Export failed`},addSpool:`Add Spool`,editSpool:`Edit Spool`,copySpool:`Copy Spool`,material:`Material`,selectMaterial:`Select material...`,subtype:`Subtype`,brand:`Brand`,searchBrand:`Search brand...`,useCustomBrand:`Use "{{brand}}"`,useCustomMaterial:`Use custom material: {{material}}`,colorName:`Color Name`,colorNamePlaceholder:`Jade White, Fire Red...`,color:`Color`,hexColor:`Hex Color`,pickColor:`Pick custom color`,labelWeight:`Label Weight`,coreWeight:`Empty Spool Weight`,searchSpoolWeight:`Search spool weight...`,weightUsed:`Used`,currentWeight:`Remaining Weight`,measuredWeight:`Measured Weight`,spoolName:`Spool`,costPerKg:`Cost per kg`,storageLocation:`Storage Location`,storageLocationPlaceholder:`e.g. Shelf A, Drawer 1`,openInInventory:`Open in Inventory`,measuredWeightError:`Measured weight must be between {{min}}g and {{max}}g.`,slicerFilament:`Slicer Filament`,slicerFilamentName:`Slicer Preset Name`,slicerPreset:`Slicer Preset`,searchPresets:`Search filament presets...`,selectedPreset:`Selected`,noPresetsFound:`No presets found`,tempOverrides:`Temperature Overrides`,note:`Note`,notePlaceholder:`Any additional notes about this spool...`,category:`Category`,categoryPlaceholder:`e.g. Production, Prototype, Client A`,categoryNone:`Uncategorized`,storageLocationNone:`No location set`,lowStockThresholdOverride:`Low-stock threshold (this spool)`,lowStockThresholdOverrideHelp:`Leave blank to use the global threshold ({{global}}%).`,clearRfid:`Clear RFID Tag`,rfidCleared:`RFID tag cleared`,archive:`Archive`,restore:`Restore`,noSpools:`No spools yet. Add your first spool to get started.`,noAvailableSpools:`No spools available. Add a spool to your inventory or unassign one from another slot first.`,kProfiles:`K-Profiles`,addKProfile:`Add K-Profile`,assignSpool:`Assign Spool`,unassignSpool:`Unassign`,assignSuccess:`Spool assigned and AMS slot configured`,assignPendingInsert:`Assigned. Slot will configure when you insert the spool.`,assignFailed:`Failed to assign spool`,selectSpool:`Select a spool to assign to this slot`,assigned:`Assigned`,assigning:`Assigning...`,searchSpools:`Search spools...`,showAllSpools:`Show all spools`,spoolmanSpools:`Spoolman Spools`,allMaterials:`All Materials`,filterByBrand:`Filter by brand...`,showArchived:`Show archived`,quickAdd:`Quick Add (Stock)`,quantity:`Quantity`,stock:`Stock`,configured:`Configured`,spoolsCreated:`{{count}} spools created`,spoolsPartiallyCreated:`{{created}} of {{total}} spools created (some failed)`,spoolCreated:`Spool created`,spoolUpdated:`Spool updated`,spoolDeleted:`Spool deleted`,deepLinkSpoolNotFound:`Spool not found`,deepLinkFetchFailed:`Could not load spool — try again`,spoolArchived:`Spool archived`,spoolRestored:`Spool restored`,kProfileSaveFailed:`K-profile settings could not be saved`,syncWeightSpoolNotFound:`Spool not found — it may have been deleted`,syncWeightSpoolmanUnreachable:`Spoolman is unreachable — try again later`,syncWeightFailed:`Failed to sync weight`,spoolmanUnreachable:`Spoolman is not reachable — please try again later`,deleteSpoolNotFound:`Spool not found — it may have already been deleted`,deleteFailed:`Failed to delete spool`,archiveSpoolNotFound:`Spool not found — it may have already been deleted`,archiveFailed:`Failed to archive spool`,restoreSpoolNotFound:`Spool not found — it may have already been deleted`,restoreFailed:`Failed to restore spool`,saveFailed:`Failed to save changes`,tagClearFailed:`Failed to clear tag`,deleteConfirm:`Are you sure you want to delete this spool? This cannot be undone.`,archiveConfirm:`Are you sure you want to archive this spool?`,advancedSettings:`Advanced Settings`,filamentInfoTab:`Filament Info`,paProfileTab:`PA Profile`,filamentInfo:`Filament`,additional:`Additional`,loadingPresets:`Loading cloud presets...`,cloudConnected:`Cloud connected`,cloudNotConnected:`Cloud not connected (using defaults)`,recentColors:`Recent`,searchColors:`Search colors...`,searchResults:`Search results`,allColors:`All colors`,commonColors:`Common colors`,showLess:`Show less`,showAll:`Show all`,noColorsFound:`No colors match your search`,noResults:`No matches found`,extraColorsLabel:`Extra colors`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.`,extraColorsInvalid:`Ignored invalid hex: {{tokens}}`,colorEffectLabel:`Effect`,colorEffect:{none:`None`,sparkle:`Sparkle`,wood:`Wood`,marble:`Marble`,glow:`Glow`,matte:`Matte`,silk:`Silk`,galaxy:`Galaxy`,rainbow:`Rainbow`,metal:`Metal`,translucent:`Translucent`,gradient:`Gradient`,dualColor:`Dual Color`,triColor:`Tri Color`,multicolor:`Multicolor`},selectMaterialFirst:`Please select a material first in the Filament Info tab.`,noPrintersConfigured:`No printers configured. Add printers to use PA profiles.`,matchingFilter:`Matching`,anyBrand:`Any brand`,anyVariant:`Any variant`,autoSelect:`Auto-select`,matches:`matches`,match:`match`,noMatches:`No matches`,connected:`Connected`,offline:`Offline`,printerOffline:`Printer is offline. Connect to view calibration profiles.`,noKProfilesMatch:`No K-profiles match the selected filament.`,leftNozzle:`Left Nozzle`,rightNozzle:`Right Nozzle`,profilesSelected:`calibration profile(s) selected`,totalInventory:`Total Inventory`,totalConsumed:`Total Consumed`,byMaterial:`By Material`,inPrinter:`In Printer`,lowStock:`Low Stock`,sinceTracking:`Since tracking started`,resetConsumedCounter:`Reset counter`,resetConsumedCounterTooltip:`Zero the consumed-grams counter for this spool. Remaining weight is not changed.`,resetConsumedCounterConfirm:`Reset this spool's consumed-grams counter to 0? Future prints will track from zero again. The spool itself, its remaining weight calculation, and your settings are not changed.`,resetAllConsumedCounters:`Reset all counters`,resetAllConsumedCountersTooltip:`Zero the consumed-grams counter on every spool. Remaining weights are not changed.`,resetAllConsumedCountersConfirm:`Reset the consumed-grams counter to 0 on all {{count}} spools (archived ones included)? This clears the "Total Consumed" stat so future prints track from zero. Spools and remaining weights are not changed.`,consumedCounterReset:`Counter reset`,allConsumedCountersReset:`Counter reset for {{count}} spool(s)`,resetConsumedCounterFailed:`Failed to reset counter`,loadedInAms:`Loaded in AMS/Ext`,remaining:`Remaining`,weightCheck:`Weight Check`,lastWeighed:`Last weighed`,neverWeighed:`Never weighed`,search:`Search spools...`,showing:`Showing`,to:`to`,of:`of`,show:`Show`,spools:`spools`,spool:`spool`,page:`Page`,noSpoolsMatch:`No results found`,noSpoolsMatchDesc:`Try adjusting your search or filters to find what you're looking for.`,active:`Active`,archived:`Archived`,all:`All`,used:`Used`,new:`New`,clearFilters:`Clear filters`,table:`Table`,cards:`Cards`,net:`Net`,groupSimilar:`Group`,groupedSpools:`{{count}} identical spools`,groupedRows:`rows`,columns:`Columns`,configureColumns:`Configure Columns`,configureColumnsDesc:`Drag to reorder columns or use arrows. Toggle visibility with the eye icon.`,visible:`visible`,reset:`Reset`,cancel:`Cancel`,applyChanges:`Apply Changes`,moveUp:`Move up`,moveDown:`Move down`,hideColumn:`Hide column`,showColumn:`Show column`,linkToSpool:`Link to Spool`,tagLinked:`Tag linked to spool`,tagLinkFailed:`Failed to link tag`,tagAlreadyLinked:`Tag already linked to another spool`,unknownTag:`Unknown RFID tag detected`,usageHistory:`Usage History`,noUsageHistory:`No usage recorded yet`,printName:`Print Name`,weightConsumed:`Weight Consumed`,clearHistory:`Clear`,historyCleared:`Usage history cleared`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`Threshold must be between 0.1 and 99.9`,assignMismatchTitle:`Material mismatch`,assignMismatchMessage:`The selected spool material "{{spoolMaterial}}" does not match the tray material "{{trayMaterial}}" for {{location}}. Assign anyway?`,assignMismatchConfirm:`Assign Anyway`,assignPartialMismatchMessage:`The spool material "{{spoolMaterial}}" is similar to but not exactly matching "{{trayMaterial}}" in {{location}}. Do you want to proceed?`,assignProfileMismatchMessage:`The spool profile "{{spoolProfile}}" does not match the tray profile "{{trayProfile}}" in {{location}}. Do you want to proceed?`,assignReconfigureNote:`The AMS slot will be reconfigured to use the spool's profile.`,spoolmanFilamentCatalog:`Spoolman Filament Catalog`,pickFromSpoolmanCatalog:`Pick from Spoolman catalog…`,spoolmanFilamentSelected:`Filament selected from Spoolman catalog`,spoolmanFilamentUnlinked:`Filament catalog link cleared`,noSpoolmanFilaments:`No filaments found in Spoolman catalog`,spoolmanFilamentColorSwatch:`Filament color`,spoolWeightManagedBySpoolman:`Empty spool weight is managed per filament type in Spoolman`,spoolmanCatalogLoadFailed:`Failed to load Spoolman filament catalog`},timelapse:{title:`Timelapse`,create:`Create Timelapse`,download:`Download`,delete:`Delete`,preview:`Preview`,frameRate:`Frame Rate`,quality:`Quality`,processing:`Processing...`,noTimelapses:`No timelapses available`},ams:{title:`AMS`,slot:`Slot`,empty:`Empty`,emptySlot:`Empty slot`,slotEmpty:`Empty`,slotUnconfigured:`?`,emptySlotReset:`No filament assigned`,unknown:`Unknown`,humidity:`Humidity`,temperature:`Temperature`,filamentType:`Filament Type`,filamentColor:`Color`,remaining:`Remaining`,history:`AMS History`,noHistory:`No history available`,configureSlot:`Configure Slot`,externalSpool:`External Spool`,profile:`Profile`,kFactor:`K Factor`,fill:`Fill`,configure:`Configure`,used:`used`,remainingUnit:`remaining`},printModal:{title:`Start Print`,selectPrinter:`Select Printer`,selectPlate:`Select Plate`,filamentMapping:`Filament Mapping`,totalCost:`Total cost:`,slotRemainingShort:` - {{grams}}g left`,printSettings:`Print Settings`,bedLeveling:`Bed Leveling`,flowCalibration:`Flow Calibration`,vibrationCalibration:`Vibration Calibration`,layerInspection:`First Layer Inspection`,timelapse:`Timelapse`,startPrint:`Start Print`,addToQueue:`Add to Queue`,cancel:`Cancel`,noPrintersAvailable:`No printers available`,printerBusy:`Printer is busy`,printerOffline:`Printer is offline`,sameTypeDifferentColor:`Same type, different color`,filamentTypeNotLoaded:`Filament type not loaded`,openCalendar:`Open calendar`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Left nozzle`,rightNozzleTooltip:`Right nozzle`,filamentOverride:`Filament Override`,filamentOverrideHint:`Optionally override filaments for model-based assignment. The scheduler will match against your selected filaments instead of the original 3MF values.`,originalFilament:`Original`,overrideWith:`Override with`,resetToOriginal:`Reset to original`,insufficientFilamentTitle:`Not enough filament`,insufficientFilamentMessage:`Some assigned spools have less filament remaining than this print needs:`,insufficientFilamentLine:`{{printer}} - {{slot}}: needs {{required}}g, remaining {{remaining}}g`,printAnyway:`Print anyway`,forceColorMatch:`Force color match`,staggerPrinterStarts:`Stagger printer starts`,staggerGroupSize:`Group size`,staggerInterval:`Interval (min)`,staggerPreview:`{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min`,staggerLastGroup:`last group: {{count}}`,staggerTotal:`total: {{minutes}} min`,staggerToPrinters:`Stagger to {{count}} printers`,gcodeInjection:`Inject auto-print G-code`},backup:{includesEncryptionKey:`Local backups include the MFA encryption key file (DATA_DIR/.mfa_encryption_key) so a backup ZIP is self-contained. Treat the ZIP as sensitive — anyone with the file can decrypt the OIDC client secrets and TOTP secrets stored inside.`,title:`Backup & Restore`,createBackup:`Create Backup`,restoreBackup:`Restore Backup`,restoreDescription:`Replace all data from a backup file`,downloadBackup:`Download Backup`,uploadBackup:`Upload Backup`,lastBackup:`Last Backup`,autoBackup:`Auto Backup`,backupNow:`Backup Now`,restoreWarning:`Warning: Restoring a backup will overwrite all current data.`,includeArchives:`Include Archives`,includeSettings:`Include Settings`,includeProfiles:`Include Profiles`,backupSuccess:`Backup created successfully`,restoreSuccess:`Backup restored successfully`,backupFailed:`Backup failed`,restoreFailed:`Restore failed`,restoreNote:`Virtual Printer will be stopped during restore`,githubBackup:`Git Backup`,enabled:`Enabled`,cloudLoginRequired:`Bambu Cloud login required. Sign in under Profiles → Cloud Profiles to enable GitHub backup.`,cloudLoginRequiredShort:`Cloud login required`,githubDescription:`Automatically sync your profiles to a private GitHub repository for backup and version history.`,repoIsPrivate:`Repository is private — safe to back up to.`,repoIsPublicWarning:`Repository is PUBLIC. Bambuddy backups include MQTT credentials, Home Assistant tokens, Prometheus tokens, your Bambu Cloud email, and printer access codes via K-profiles. Saving is blocked until you make the repository private in your provider's settings.`,repoVisibilityUnknown:`Could not determine repository visibility. Bambuddy refuses to back up to anything not confirmed private; saving will be blocked.`,repositoryUrl:`Repository URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Allow insecure HTTP`,allowInsecureHttpHint:`Enable for self-hosted instances on private networks without TLS`,personalAccessToken:`Personal Access Token`,tokenSaved:`(saved)`,enterNewToken:`Enter new token to update`,tokenHint:`Fine-grained token with Contents read/write permission`,branch:`Branch`,provider:`Git Provider`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Manual only`,hourly:`Hourly`,daily:`Daily`,weekly:`Weekly`,includeInBackup:`Include in backup`,kProfiles:`K-Profiles`,kProfilesDescription:`Pressure advance calibration from connected printers`,noPrintersConnected:`No printers connected`,printersConnected:`{{connected}}/{{total}} connected`,cloudProfiles:`Cloud Profiles`,cloudProfilesDescription:`Filament, printer, and process presets from Bambu Cloud`,appSettings:`App Settings`,appSettingsDescription:`Bambuddy configuration (complete database)`,spoolInventory:`Spool Inventory`,spoolInventoryDescription:`Filament spools, usage history, and cost tracking`,printArchives:`Print Archives`,printArchivesDescription:`Print history metadata (no gcode/3MF files)`,lastBackupAt:`Last backup:`,noBackupsYet:`No backups yet`,next:`Next:`,startingBackup:`Starting backup...`,test:`Test`,enableBackup:`Enable Backup`,testConnection:`Test Connection`,enterRepoUrl:`Enter repository URL`,enterRepoAndToken:`Enter repository URL and access token`,repoRequired:`Repository URL is required`,tokenRequired:`Access token is required`,githubBackupEnabled:`GitHub backup enabled`,tokenUpdated:`Token updated`,settingsSaved:`Settings saved`,failedToSave:`Failed to save: {{message}}`,backupCompleteFiles:`Backup complete - {{count}} files updated`,backupSkippedNoChanges:`Backup skipped - no changes`,backupFailed2:`Backup failed: {{message}}`,clearedLogs:`Cleared {{count}} logs`,failedToClearLogs:`Failed to clear logs: {{message}}`,history:`History`,clear:`Clear`,date:`Date`,status:`Status`,commit:`Commit`,localBackup:`Local Backup`,localBackupDescription:`Create a complete backup of your Bambuddy data including the database, archives, uploads, and all files.`,downloadBackupLabel:`Download Backup`,completeBackupZip:`Complete backup: database + all files (ZIP)`,download:`Download`,preparingBackup:`Preparing backup...`,creatingArchive:`Creating backup archive... This may take a while for large archives.`,downloadingFile:`Downloading backup file...`,backupDownloaded:`Backup downloaded successfully`,failedToCreateBackup:`Failed to create backup: {{message}}`,restore:`Restore`,restoreReplacesAll:`Restore replaces all data.`,restoreReplacesAllDetail:`Your current database and files will be completely replaced. A restart is required after restore.`,restoreConfirmTitle:`Restore Backup`,restoreConfirmMessage:`Are you sure you want to restore from "{{filename}}"? This will completely replace your current database and all files. The application will need to be restarted after restore.`,restoreConfirmButton:`Restore Backup`,uploadingFile:`Uploading backup file...`,backupRestoredRestart:`Backup restored. Please restart Bambuddy.`,failedToRestore:`Failed to restore backup. Please check the file format.`,reloadNow:`Reload Now`,creatingBackup:`Creating Backup`,restoringBackup:`Restoring Backup`,preparing:`Preparing...`,processing:`Processing...`,doNotClosePage:`Please do not close this page or navigate away. This operation may take several minutes for large backups.`,restoring:`Restoring...`,restoreComplete:`Restore Complete`,restoreFailed2:`Restore Failed`,importSettings:`Import settings from a backup file`,pleaseWaitRestoring:`Please wait while your data is being restored`,selectBackupFile:`Click to select backup file (.json or .zip)`,duplicateHandling:`How duplicate handling works:`,matchPrinters:`Printers`,matchPrintersBy:`matched by serial number`,matchSmartPlugs:`Smart Plugs`,matchSmartPlugsBy:`matched by IP address`,matchNotificationProviders:`Notification Providers`,matchNotificationProvidersBy:`matched by name`,matchFilaments:`Filaments`,matchFilamentsBy:`matched by name + type + brand`,matchArchives:`Archives`,matchArchivesBy:`matched by content hash (always skipped)`,matchPendingUploads:`Pending Uploads`,matchPendingUploadsBy:`matched by filename`,matchSettingsTemplates:`Settings & Templates`,matchSettingsTemplatesBy:`always overwritten`,replaceExisting:`Replace existing data`,keepExisting:`Keep existing data`,overwriteDescription:`Overwrite items that already exist with backup data`,keepDescription:`Only restore items that don't already exist`,overwriteCaution:`Caution:`,overwriteWarning:`Overwriting will replace your current configurations with data from the backup. Printer access codes are never overwritten for security.`,cancel:`Cancel`,processingBackup:`Processing backup file...`,itemsRestored:`Items Restored`,itemsSkipped:`Items Skipped`,restored:`Restored`,skippedAlreadyExist:`Skipped (already exist)`,filesCategory:`Files (3MF, thumbnails, etc.)`,andMore:`...and {{count}} more`,newApiKeysGenerated:`New API Keys Generated`,keysShownOnce:`These keys are only shown once. Copy them now!`,copy:`Copy`,noDataFound:`No data was found to restore in the backup file.`,close:`Close`,scheduledBackup:`Scheduled Backups`,scheduledBackupDescription:`Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.`,frequency:`Frequency`,backupTime:`Time`,retention:`Retention`,retentionDescription:`Number of backups to keep`,outputPath:`Output Path`,outputPathPlaceholder:`Default: {{path}}`,outputPathDescription:`Leave empty for default location`,runNow:`Run Now`,backupFiles:`Backup Files`,noScheduledBackups:`No backups yet`,deleteBackup:`Delete`,deleteBackupConfirm:`Delete this backup file?`,backupRunning:`Backup in progress...`,scheduledBackupComplete:`Backup completed successfully`,scheduledBackupFailed:`Backup failed`,nextBackup:`Next backup`,backupSize:`Size`,localTimeHint:`Local time ({{tz}})`,defaultPathLabel:`Default:`,categories:{settings:`Settings`,notification_providers:`Notification Providers`,notification_templates:`Notification Templates`,smart_plugs:`Smart Plugs`,printers:`Printers`,filaments:`Filaments`,maintenance_types:`Maintenance Types`,archives:`Archives`,projects:`Projects`,pending_uploads:`Pending Uploads`,external_links:`External Links`,api_keys:`API Keys`}},tags:{title:`Tags`,addTag:`Add Tag`,editTag:`Edit Tag`,deleteTag:`Delete Tag`,tagName:`Tag Name`,tagColor:`Tag Color`,noTags:`No tags`,deleteConfirm:`Are you sure you want to delete this tag?`,manageTags:`Manage Tags`},uploadModal:{title:`Upload 3MF Files`,dragDrop:`Drag & drop .3mf files here`,or:`or`,browseFiles:`Browse Files`,extractionInfo:`The printer model will be automatically extracted from the 3MF file metadata.`,uploaded:`uploaded`,failed:`failed`,uploading:`Uploading...`,upload:`Upload`,uploadFailed:`Upload failed`},editArchive:{title:`Edit Archive`,name:`Name`,namePlaceholder:`Print name`,printer:`Printer`,noPrinter:`No printer`,project:`Project`,noProject:`No project`,itemsPrinted:`Items Printed`,itemsPrintedHelp:`Number of items produced in this print job`,notes:`Notes`,notesPlaceholder:`Add notes about this print...`,externalLink:`External Link`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link to Printables, Thingiverse, or other source`,tags:`Tags`,tagsPlaceholder:`Add tags...`,addMoreTags:`Add more tags...`,matchingTags:`Matching "{{query}}"`,existingTags:`Existing tags`,clickToAdd:`(click to add)`,status:`Status`,failureReason:`Failure Reason`,selectReason:`Select reason...`,photos:`Photos of Printed Result`,photosHelp:`Click + to add photos of your printed result`,printResult:`Print result`,saving:`Saving...`,failureReasons:{adhesionFailure:`Adhesion failure`,spaghettiDetached:`Spaghetti / Detached`,layerShift:`Layer shift`,cloggedNozzle:`Clogged nozzle`,filamentRunout:`Filament runout`,warping:`Warping`,stringing:`Stringing`,underExtrusion:`Under-extrusion`,powerFailure:`Power failure`,userCancelled:`User cancelled`,other:`Other`},statuses:{completed:`Completed`,failed:`Failed`,aborted:`Cancelled`,printing:`Printing`}},kProfiles:{title:`K-Profiles`,noPrintersConfigured:`No Printers Configured`,addPrinterInSettings:`Add a printer in Settings to manage K-profiles`,noActivePrinters:`No Active Printers`,enablePrinterConnection:`Enable a printer connection to view its K-profiles`,loadingProfiles:`Loading K-Profiles...`,printerOffline:`Printer Offline`,printerOfflineDesc:`The selected printer is not connected. Power it on to view K-profiles.`,noMatchingProfiles:`No Matching Profiles`,noMatchingProfilesDesc:`No profiles match your search criteria`,noKProfiles:`No K-Profiles`,noKProfilesDesc:`No pressure advance profiles found for {{diameter}}mm nozzle`,createFirstProfile:`Create First Profile`,printer:`Printer`,nozzle:`Nozzle`,refresh:`Refresh`,addProfile:`Add Profile`,export:`Export`,import:`Import`,select:`Select`,selectAll:`Select All`,delete:`Delete`,searchPlaceholder:`Search by name or filament...`,allExtruders:`All Extruders`,leftOnly:`Left Only`,rightOnly:`Right Only`,allFlow:`All Flow`,hfOnly:`HF Only`,sOnly:`S Only`,sortName:`Sort: Name`,sortKValue:`Sort: K-Value`,sortFilament:`Sort: Filament`,leftExtruder:`Left Extruder`,rightExtruder:`Right Extruder`,modal:{addTitle:`Add K-Profile`,editTitle:`Edit K-Profile`,profileName:`Profile Name`,profileNamePlaceholder:`My PLA Profile`,kValue:`K-Value`,kValuePlaceholder:`0.020`,kValueHelp:`Typical range: 0.01 - 0.06 for PLA, 0.02 - 0.10 for PETG`,filament:`Filament`,selectFilament:`Select filament...`,noFilamentsHelp:`No filaments found. Create a K-profile in Bambu Studio first.`,flowType:`Flow Type`,highFlow:`High Flow`,standard:`Standard`,nozzleSize:`Nozzle Size`,extruder:`Extruder`,extruders:`Extruders`,left:`Left`,right:`Right`,notes:`Notes (stored locally)`,notesPlaceholder:`Add notes about this profile...`,notesHelp:`Notes are saved in Bambuddy, not on the printer`,syncing:`Syncing with printer...`,savingExtruder:`Saving to extruder {{current}}/{{total}}...`,pleaseWait:`Please wait`},deleteConfirm:{title:`Delete Profile`,cannotUndo:`This cannot be undone`,message:`Are you sure you want to delete "{{name}}" from the printer?`},bulkDelete:{title:`Delete Profiles`,cannotUndo:`This cannot be undone`,message:`Are you sure you want to delete {{count}} selected profiles from the printer?`},toast:{profileSaved:`K-profile saved`,profilesSaved:`K-profile saved to {{count}} extruders`,selectAtLeastOneExtruder:`Please select at least one extruder`,profileDeleted:`K-profile deleted`,profilesDeleted:`Deleted {{count}} profiles`,exportedProfiles:`Exported {{count}} profiles`,importedProfiles:`Imported {{count}} of {{total}} profiles`,noProfilesToExport:`No profiles to export`,invalidFileFormat:`Invalid file format`,failedToParseImport:`Failed to parse import file`,failedToSaveBatch:`Failed to save K-profiles`,noteSaved:`Note saved`,failedToSaveNote:`Failed to save note`},permission:{noRead:`You do not have permission to refresh profiles`,noCreate:`You do not have permission to add profiles`,noUpdate:`You do not have permission to update K-profiles`,noDelete:`You do not have permission to delete K-profiles`,noExport:`You do not have permission to export profiles`,noImport:`You do not have permission to import profiles`}},virtualPrinter:{title:`Virtual Printer`,running:`Running`,stopped:`Stopped`,description:{default:`Enable a virtual printer that appears in Bambu Studio and OrcaSlicer. Files sent to this printer will be archived directly without printing.`,proxy:`Enable a proxy that relays slicer traffic to a real printer, allowing remote printing over any network.`},enable:{title:`Enable Virtual Printer`,visibleInSlicer:`Visible as "Bambuddy" in slicer discovery`,proxyingTo:`Proxying to {{name}}`,notActive:`Not active`},model:{title:`Printer Model`,description:`Select which printer model to emulate.`,restartWarning:`Changing the model will restart the virtual printer`},accessCode:{title:`Access Code`,isSet:`Access code is set`,notSet:`No access code set - required to enable`,placeholder:`Enter 8-char code`,placeholderChange:`Enter new code to change`,hint:`Must be exactly 8 characters. Used by slicers to authenticate.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Inherited from target`,derivedFromTargetHint:`Uses the target printer's access code. The bridge forwards slicer auth to the real printer, so the codes must match — edit the printer's access code to change this value.`,reveal:`Show access code`,hide:`Hide access code`},targetPrinter:{title:`Target Printer`,configured:`Proxy target configured`,notConfigured:`No target printer selected - required for proxy mode`,placeholder:`Select a printer...`,hint:`Select the printer to proxy slicer traffic to. The printer must be in LAN mode.`,noPrinters:`No printers configured. Add a printer first to use proxy mode.`},remoteInterface:{title:`Network Interface Override`,configured:`Interface override active`,optional:`Optional - use if auto-detected IP is wrong (e.g. multiple NICs, Docker, VPN)`,placeholder:`Auto-detect (default)...`,hint:`Override the IP address advertised via SSDP and used in the TLS certificate. Useful when Bambuddy has multiple network interfaces.`},mode:{title:`Mode`,archive:`Archive`,archiveDesc:`Archive files immediately`,review:`Review`,reviewDesc:`Review before archiving`,queue:`Queue`,queueDesc:`Archive and add to queue`,proxy:`Proxy`,proxyDesc:`Relay to real printer`},autoDispatch:{title:`Auto-dispatch`,description:`Automatically start prints when added to queue. When off, prints wait for manual dispatch.`},queueForceColorMatch:{title:`Force color match`,description:`Refuse to dispatch onto a printer that does not have the exact filament type and color loaded. Off by default — without this, the queue uses model-only matching and may pick a printer with the wrong color loaded.`},gcodeInjection:{title:`G-code injection`,description:`Apply the per-model G-code snippets configured in Settings to jobs from this VP. Off by default.`},tailscaleDisabled:{title:`Tailscale integration`,description:`Enable to mark this VP as exposed over Tailscale. Shows the host's Tailscale address so you know which IP to paste into the slicer. The CA-import step is unchanged — this toggle has no effect on certificates.`},setupRequired:{title:`Setup Required`,description:`The virtual printer feature requires additional system configuration before it will work. This includes port forwarding, firewall rules, and platform-specific settings.`,readGuide:`Read the setup guide before enabling`},archiveNameSource:{title:`Archive name source`,description:`Choose how new archives are named when files arrive via the virtual printer. "Metadata" uses the slicer-embedded Title from the 3MF (default). "Filename" uses the filename Bambu Studio sent over FTP. Note: Bambu Studio overwrites the name you type in the "send to printer" dialog with the 3MF's Title field whenever one is present, so both modes often produce the same string.`,metadata:`Metadata`,filename:`Filename`},caCert:{title:`Slicer certificate`,description:`Virtual printers use a TLS certificate signed by the Bambuddy CA. Import this CA certificate into your slicer's trust store once so it accepts the connection — no need to copy it from the command line.`,copy:`Copy`,copied:`Copied`,download:`Download`,fingerprint:`SHA-256`},howItWorks:{title:`How it works`,step1:`On the same LAN, virtual printers appear in your slicer (Bambu Studio / OrcaSlicer) automatically via discovery. From other networks, add them manually by IP address and access code.`,step2:`In Archive, Review, and Queue modes, use the "Send" button in your slicer to upload 3MF files to Bambuddy. The slicer will show "Print success" — the file is stored, not printed.`,step3:`In Proxy mode, the virtual printer relays all traffic to a real printer — prints start immediately as if connected directly.`},status:{title:`Status Details`,printerName:`Printer Name`,model:`Model`,serialNumber:`Serial Number`,mode:`Mode`,pendingFiles:`Pending Files`,targetPrinter:`Target Printer`,ftpPort:`FTP Port`,mqttPort:`MQTT Port`,ftpConnections:`FTP Connections`,mqttConnections:`MQTT Connections`},toast:{updated:`Virtual printer settings updated`,failedToUpdate:`Failed to update settings`,copyFailed:`Failed to copy — try selecting the text manually`,accessCodeRequired:`Please set an access code first`,targetPrinterRequired:`Please select a target printer first`,bindIpRequired:`Please set a bind IP first`,accessCodeEmpty:`Access code cannot be empty`,accessCodeLength:`Access code must be exactly 8 characters`,targetCodeChangedRebind:`Access code now matches the new target printer. Re-add this device in your slicer to pick up the new code.`,created:`Virtual printer created`,failedToCreate:`Failed to create virtual printer`,deleted:`Virtual printer deleted`,failedToDelete:`Failed to delete virtual printer`},list:{title:`Virtual Printers`,add:`Add`,addFirst:`Add Virtual Printer`,empty:`No virtual printers configured. Add one to get started.`},bindIp:{title:`Bind Interface`,placeholder:`Select interface...`,hint:`Network interface for this virtual printer to bind to. Must be unique per printer.`},proxy:{accessCodeHint:`In proxy mode, use your target printer's access code in the slicer. The connection is forwarded transparently to the real printer.`},addDialog:{title:`Add Virtual Printer`,name:`Name`,hint:`You can configure access code, target printer, and other settings after creating.`,create:`Create`},deleteConfirm:{title:`Delete Virtual Printer`,message:`Are you sure you want to delete "{{name}}"? This will stop all services for this printer.`}},modelViewer:{openInSlicer:`Open in Slicer`,tabs:{model:`3D Model`,gcode:`G-code Preview`},notAvailable:`not available`,notSliced:`not sliced`,plates:`Plates`,allPlates:`All Plates`,plateNumber:`Plate {{number}}`,plateCount:`{{count}} plate`,plateCount_other:`{{count}} plates`,objectCount:`{{count}} object`,objectCount_other:`{{count}} objects`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filaments`,eta:`ETA {{minutes}} min`,noPreview:`No preview available for this file`,pagination:{pageOf:`Page {{current}} of {{total}}`,prev:`Prev`,next:`Next`},errors:{failedToLoad:`Failed to load file`,noMeshes:`No meshes found in 3MF file`,unsupportedFormat:`Unsupported file format`}},maintenanceDescriptions:{lubricateCarbonRods:`Apply lubricant to carbon rods for smooth motion`,lubricateRails:`Apply lubricant to linear rails for smooth motion`,cleanNozzle:`Clean hotend and nozzle to prevent clogs`,checkBelts:`Verify belt tension for accurate prints`,cleanBuildPlate:`Clean build plate for better adhesion`,checkExtruder:`Inspect extruder gears for wear`,checkCooling:`Ensure cooling fans are working properly`,generalInspection:`General printer inspection`,cleanCarbonRods:`Clean carbon rods to reduce friction`,lubricateSteelRods:`Apply lubricant to steel rods for smooth motion`,cleanSteelRods:`Clean steel rods to reduce friction`,cleanLinearRails:`Wipe linear rails to remove dust and debris`,checkPtfeTube:`Inspect PTFE tube for wear or damage`,replaceHepaFilter:`Replace HEPA filter for air quality`,replaceCarbonFilter:`Replace activated carbon filter`,lubricateLeftNozzleRail:`Lubricate left nozzle rail (H2 series)`},smartPlugs:{offline:`Offline`,admin:`Admin`,openPlugAdminPage:`Open plug admin page`,deleteSmartPlug:`Delete Smart Plug`,turnOnSmartPlug:`Turn On Smart Plug`,turnOffSmartPlug:`Turn Off Smart Plug`,turnOn:`Turn On`,turnOff:`Turn Off`,addSmartPlug:{scanningNetwork:`Scanning network...`,chooseEntity:`Choose an entity...`,connectionFailed:`Connection failed`,searchEntities:`Search entities...`,searchPowerSensors:`Search power sensors...`,searchEnergySensors:`Search energy sensors...`,placeholders:{plugName:`Living Room Plug`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Same as power topic, or different`}},linkedTo:`Linked to:`,monitorOnly:`Monitor Only`,alerts:`Alerts`,scheduleOn:`On {{time}}`,scheduleOff:`Off {{time}}`,on:`On`,off:`Off`,power:`Power`,kwhToday:`kWh Today`,settings:`Settings`,automationSettings:`Automation Settings`,showInSwitchbar:`Show in Switchbar`,quickAccessSidebar:`Quick access from sidebar`,enabled:`Enabled`,enableAutomation:`Enable automation for this plug`,autoOn:`Auto On`,autoOnDescription:`Turn on when print starts`,autoOff:`Auto Off`,autoOffDescription:`Turn off when print completes (one-shot)`,autoOffPersistent:`Keep Enabled`,autoOffPersistentDescription:`Stay enabled between prints instead of one-shot`,autoOffAfterDrying:`Auto Off After Drying`,autoOffAfterDryingDescription:`Turn off when AMS drying completes`,delayAfterDryingMinutes:`Drying delay (minutes)`,turnOffDelayMode:`Turn Off Delay Mode`,time:`Time`,temp:`Temp`,delayMinutes:`Delay (minutes)`,tempThreshold:`Temperature threshold (°C)`,tempThresholdDescription:`Turns off when nozzle cools below this temperature`,edit:`Edit`,deleteConfirm:`Are you sure you want to delete "{{name}}"? This cannot be undone.`,turnOnConfirm:`Are you sure you want to turn on "{{name}}"?`,turnOffConfirm:`Are you sure you want to turn off "{{name}}"? This will cut power to the connected device.`,failedToTurn:`Failed to turn {{action}} "{{name}}"`,unknown:`Unknown`,addTitle:`Add Smart Plug`,editTitle:`Edit Smart Plug`,stopScanning:`Stop Scanning`,discoverTasmota:`Discover Tasmota Devices`,foundDevices:`Found {{count}} device(s) - click to select:`,noDevicesFound:`No Tasmota devices found on your network`,haNotConfigured:`Home Assistant is not configured. Set it up in`,haSettingsPath:`Settings → Network → Home Assistant`,selectEntity:`Select Entity *`,ipAddress:`IP Address *`,nameLabel:`Name *`,username:`Username`,password:`Password`,authHint:`Leave empty if your Tasmota device doesn't require authentication`,linkToPrinter:`Link to Printer`,noPrinter:`No printer (manual control only)`,linkingDescription:`Linking enables automatic on/off when prints start/complete`,powerAlerts:`Power Alerts`,alertAbove:`Alert if above (W)`,alertBelow:`Alert if below (W)`,alertDescription:`Get notified when power consumption crosses these thresholds. Leave empty to disable that direction.`,dailySchedule:`Daily Schedule`,turnOnAt:`Turn On at`,turnOffAt:`Turn Off at`,scheduleDescription:`Automatically turn the plug on/off at these times daily. Leave empty to skip that action.`,showOnPrinterCard:`Show on Printer Card`,displayOnPrinterCard:`Display button on printer card`,connectedResult:`Connected!`,deviceLabel:`Device: {{name}} - `,stateLabel:`State: {{state}}`,test:`Test`,delete:`Delete`,save:`Save`,add:`Add`,cancel:`Cancel`,failedToStartScan:`Failed to start scan`,nameRequired:`Name is required`,entityRequired:`Entity is required for Home Assistant plugs`,mqttTopicRequired:`At least one MQTT topic must be configured for power, energy, or state monitoring`,loadingEntities:`Loading entities...`,loading:`Loading...`,failedToLoadEntities:`Failed to load entities: {{error}}`,noEntitiesMatching:`No entities found matching "{{search}}"`,noEntitiesAvailable:`No entities available`,searchingEntities:`Searching all entities ({{count}} found)`,showingEntities:`Showing switch, light, input_boolean ({{count}} available)`,energyMonitoringOptional:`Energy Monitoring (Optional)`,energyMonitoringHint:`Search and select sensors that provide power/energy data.`,powerSensorW:`Power Sensor (W)`,energyTodayKwh:`Energy Today (kWh)`,totalEnergyKwh:`Total Energy (kWh)`,noMatchingSensors:`No matching sensors`,none:`None`,mqttNotConfigured:`MQTT broker not configured. Set broker address in`,mqttSettingsPath:`Settings → Network → MQTT Publishing`,mqttNotConfiguredSuffix:`(you don't need to enable publishing, just fill in the broker details).`,mqttMonitorOnlyDescription:`MQTT plugs receive power/energy data via MQTT subscription. On/off control is not available - use your MQTT broker or home automation system.`,powerMonitoring:`Power Monitoring`,energyMonitoring:`Energy Monitoring`,stateMonitoring:`State Monitoring`,optional:`optional`,topic:`Topic`,jsonPath:`JSON Path`,multiplier:`Multiplier`,onValue:`ON Value`,mqttPowerHint:`JSON path extracts value from JSON payload (e.g., "power_l1"). Leave empty if topic publishes raw numeric values. Use multiplier 0.001 for mW→W, 1000 for kW→W.`,mqttEnergyHint:`JSON path extracts value from JSON payload. Leave empty for raw values. Use multiplier 0.001 for Wh→kWh, 1000 for MWh→kWh.`,mqttStateHint:`JSON path extracts value from JSON payload. Leave empty for raw values. ON value: the exact string that means "ON". Leave empty for auto-detect (ON, true, 1).`,restControl:`Control`,restOnUrl:`Turn ON URL`,restOffUrl:`Turn OFF URL`,restOnBody:`ON Request Body`,restOffBody:`OFF Request Body`,restMethod:`HTTP Method`,restHeaders:`Custom Headers (JSON)`,restStatusUrl:`Status URL`,restStatusPath:`State JSON Path`,restStatusOnValue:`ON Value`,restPowerUrl:`Power URL`,restPowerPath:`Power JSON Path`,restPowerMultiplier:`Power Multiplier`,restEnergyUrl:`Energy URL`,restEnergyPath:`Energy JSON Path`,restEnergyMultiplier:`Energy Multiplier`,restUrlRequired:`At least one URL (ON or OFF) is required for REST plugs`,restHeadersHint:`e.g. {"Authorization": "Bearer your-token"}`,restBodyHint:`e.g. ON, {"state": "on"}`,restStatusHint:`URL to poll for current state`,restPathHint:`e.g. state or data.power.status`,restPowerUrlHint:`Separate URL for power data (uses Status URL if empty)`,restEnergyUrlHint:`Separate URL for energy data (uses Status URL if empty)`,restEnergyHint:`Each value can use its own URL or fall back to the Status URL. Use multipliers for unit conversion (e.g. 0.001 to convert Wh to kWh).`,testConnection:`Test Connection`,connectionSuccess:`Connection successful`,noSwitchesInSwitchbar:`No switches in switchbar`,enableSwitchbarHint:`Enable "Show in Switchbar" in Settings > Smart Plugs`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`Email`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`},providerDescriptions:{email:`SMTP email notifications`,telegram:`Notifications via Telegram bot`,discord:`Send to Discord channel via webhook`,ntfy:`Free, self-hostable push notifications`,pushover:`Simple, reliable push notifications`,callmebot:`Free WhatsApp notifications via CallMeBot`,webhook:`Generic HTTP POST to any URL`,homeassistant:`Persistent notifications in Home Assistant dashboard`},lastSuccess:`Last: {{date}}`,error:`Error`,printer:`Printer:`,allPrinters:`All printers`,sendTestNotification:`Send Test Notification`,eventSettings:`Event Settings`,enabled:`Enabled`,sendFromProvider:`Send notifications from this provider`,printEvents:`Print Events`,printerStatus:`Printer Status`,amsAlarms:`AMS Alarms`,amsHtAlarms:`AMS-HT Alarms`,printQueue:`Print Queue`,start:`Start`,plateCheck:`Plate Check`,complete:`Complete`,failed:`Failed`,stopped:`Stopped`,progress:`Progress`,offline:`Offline`,lowFilament:`Low Filament`,maintenance:`Maintenance`,amsHumidity:`AMS Humidity`,amsTemp:`AMS Temp`,amsHtHumidity:`AMS-HT Humidity`,amsHtTemp:`AMS-HT Temp`,bedCooled:`Bed Cooled`,firstLayer:`First Layer`,quiet:`Quiet`,digest:`Digest {{time}}`,printStarted:`Print Started`,plateNotEmpty:`Plate Not Empty`,plateNotEmptyDescription:`Objects detected before print`,printCompleted:`Print Completed`,bedCooledLabel:`Bed Cooled`,bedCooledDescription:`Bed cooled below threshold after print`,firstLayerCompleteLabel:`First Layer Complete`,firstLayerCompleteDescription:`Notify with snapshot when first layer finishes`,missingSpoolAssignmentLabel:`Missing Spool Assignment`,missingSpoolAssignmentDescription:`Notify when print starts and required trays have no assigned spool`,printFailed:`Print Failed`,printStopped:`Print Stopped`,progressMilestones:`Progress Milestones`,progressMilestonesDescription:`Notify at 25%, 50%, 75%`,printerOffline:`Printer Offline`,printerError:`Printer Error`,aiFailureDetection:`AI Failure Detection`,aiFailureDetectionDescription:`Notify when Obico AI detects a possible print failure`,lowFilamentLabel:`Low Filament`,maintenanceDue:`Maintenance Due`,maintenanceDueDescription:`Notify when maintenance is needed`,amsHumidityHigh:`AMS Humidity High`,amsHumidityHighDescription:`Regular AMS humidity exceeds threshold`,amsTemperatureHigh:`AMS Temperature High`,amsTemperatureHighDescription:`Regular AMS temperature exceeds threshold`,amsHtHumidityHigh:`AMS-HT Humidity High`,amsHtHumidityHighDescription:`AMS-HT humidity exceeds threshold`,amsHtTemperatureHigh:`AMS-HT Temperature High`,amsHtTemperatureHighDescription:`AMS-HT temperature exceeds threshold`,inventoryAlerts:`Inventory Alerts`,stockReorderAlert:`Reorder Alert`,stockReorderAlertDescription:`SKU has reached its reorder point`,stockBreakAlert:`Stock Break Alert`,stockBreakAlertDescription:`Stock will run out before replenishment arrives`,jobAdded:`Job Added`,jobAddedDescription:`Job added to queue`,jobAssigned:`Job Assigned`,jobAssignedDescription:`Model-based job assigned to printer`,jobStarted:`Job Started`,jobStartedDescription:`Queue job started printing`,jobWaiting:`Job Waiting`,jobWaitingDescription:`Job waiting for filament or printer`,jobSkipped:`Job Skipped`,jobSkippedDescription:`Job skipped (previous failed)`,jobFailed:`Job Failed`,jobFailedDescription:`Job failed to start`,queueComplete:`Queue Complete`,queueCompleteDescription:`All queue jobs finished`,quietHours:`Quiet Hours`,noNotificationsDuring:`No notifications during these hours`,editProviderToChangeQuietHours:`Edit provider to change quiet hours`,dailyDigest:`Daily Digest`,batchNotifications:`Batch notifications into a single daily summary`,sendAt:`Send at {{time}}`,editProviderToChangeDigestTime:`Edit provider to change digest time`,edit:`Edit`,deleteProvider:`Delete Notification Provider`,deleteConfirm:`Are you sure you want to delete "{{name}}"? This cannot be undone.`,delete:`Delete`,addTitle:`Add Notification Provider`,editTitle:`Edit Notification Provider`,nameLabel:`Name *`,namePlaceholder:`My Notifications`,providerTypeLabel:`Provider Type *`,configuration:`Configuration`,testConfiguration:`Test Configuration`,printerFilter:`Printer Filter`,onlyFromPrinter:`Only send notifications for events from this printer`,quietHoursDnd:`Quiet Hours (Do Not Disturb)`,quietStart:`Start`,quietEnd:`End`,dailyDigestLabel:`Daily Digest`,sendDigestAt:`Send digest at`,digestCollected:`Events will be collected and sent as a single summary at this time`,notificationEvents:`Notification Events`,progressPercent:`(25%, 50%, 75%)`,bedCooledAfterPrint:`(after print completes)`,eventPriority:{sectionTitle:`ntfy Priority`,helpNtfy:`Pick a priority for each enabled event. ntfy uses these to escalate alerts (sound, visibility, push behavior). Levels not set here use the ntfy server default.`,min:`Min`,low:`Low`,default:`Default`,high:`High`,urgent:`Urgent`},cancel:`Cancel`,save:`Save`,add:`Add`,nameRequired:`Name is required`,fieldRequired:`{{field}} is required`,phoneNumber:`Phone Number`,apiKey:`API Key`,serverUrl:`Server URL`,topic:`Topic`,authToken:`Auth Token`,userKey:`User Key`,appToken:`App Token`,priority:`Priority`,botToken:`Bot Token`,chatId:`Chat ID`,smtpServer:`SMTP Server`,smtpPort:`SMTP Port`,security:`Security`,authentication:`Authentication`,username:`Username`,password:`Password`,fromEmail:`From Email`,toEmail:`To Email`,webhookUrl:`Webhook URL`,payloadFormat:`Payload Format`,authorization:`Authorization`,titleFieldName:`Title Field Name`,messageFieldName:`Message Field Name`,editTemplate:`Edit Template: {{name}}`,titleLabel:`Title`,bodyLabel:`Body`,titlePlaceholder:`Notification title...`,bodyPlaceholder:`Notification body...`,availableVariables:`Available Variables`,clickToInsert:`Click to insert at cursor position in body`,livePreview:`Live Preview`,hide:`Hide`,show:`Show`,loadingPreview:`Loading preview...`,enterTemplateContent:`Enter template content to see preview`,titlePreview:`Title:`,bodyPreview:`Body:`,resetToDefault:`Reset to Default`,titleRequired:`Title is required`,bodyRequired:`Body is required`,notificationLog:`Notification Log`,showFailedOnly:`Failed only`,last24Hours:`Last 24 hours`,last7Days:`Last 7 days`,last30Days:`Last 30 days`,last90Days:`Last 90 days`,justNow:`Just now`,noFailedNotifications:`No failed notifications`,noNotificationsLogged:`No notifications logged`,unknownProvider:`Unknown Provider`,logTitle:`Title`,logMessage:`Message`,logError:`Error`,logProvider:`Provider: {{type}}`,logTime:`Time: {{time}}`,refresh:`Refresh`,clearOld:`Clear Old`,statsSummary:`Last {{days}} days:`,statsNotifications:`notifications`,statsSent:`{{count}} sent`,statsFailed:`{{count}} failed`,eventTypes:{print_start:`Print Started`,print_complete:`Print Complete`,print_failed:`Print Failed`,print_stopped:`Print Stopped`,print_progress:`Progress`,printer_offline:`Printer Offline`,printer_error:`Printer Error`,filament_low:`Low Filament`,maintenance_due:`Maintenance Due`,test:`Test`},userEmail:{title:`Notifications`,emailNotifications:`Email Notifications`,emailNotificationsDesc:`Receive email notifications for your own print jobs. Emails are sent using the system SMTP settings configured in Advanced Authentication.`,sendingTo:`Notifications will be sent to`,noEmailWarning:`Your account does not have an email address. Contact an administrator to add one.`,printJobNotifications:`Print Job Notifications`,printJobNotificationsDesc:`Choose which events trigger email notifications for print jobs you submit.`,printJobStarts:`Print Job Starts`,printJobStartsDesc:`Get notified when your print job begins.`,printJobFinishes:`Print Job Finishes`,printJobFinishesDesc:`Get notified when your print job completes successfully.`,printErrors:`Print Errors`,printErrorsDesc:`Get notified when your print job fails or encounters an error.`,printJobStops:`Print Job Stops`,printJobStopsDesc:`Get notified when your print job is cancelled or stopped.`,saveSuccess:`Notification preferences saved.`,saveError:`Failed to save notification preferences.`}},richTextEditor:{bold:`Bold`,italic:`Italic`,underline:`Underline`,bulletList:`Bullet List`,numberedList:`Numbered List`,alignLeft:`Align Left`,alignCenter:`Align Center`,alignRight:`Align Right`,addLink:`Add Link`,removeLink:`Remove Link`},externalLinks:{title:`Sidebar Links`,sidebarLayout:`Sidebar`,sidebarLayoutDescription:`Show or hide built-in pages, add external links, and drag items to reorder the sidebar navigation.`,systemPages:`Bambuddy pages`,externalLinks:`External links`,visibleInSidebar:`Visible in sidebar`,hiddenFromSidebar:`Hidden from sidebar`,requiredInSidebar:`Required in sidebar`,hidePage:`Hide page`,showPage:`Show page`,settingsCannotBeHidden:`Settings cannot be hidden`,noLinksConfigured:`No external links configured`,deleteLink:`Delete Link`,removeCustomIcon:`Remove custom icon`,openInNewTab:`Open in new tab`,placeholders:{linkName:`My Link`}},keyboardShortcuts:{title:`Keyboard Shortcuts`,navigation:`Navigation`,archivesSection:`Archives`,kProfilesSection:`K-Profiles`,generalSection:`General`,shortcuts:{goToPrinters:`Go to Printers`,goToArchives:`Go to Archives`,goToQueue:`Go to Queue`,goToStats:`Go to Statistics`,goToProfiles:`Go to Cloud Profiles`,goToSettings:`Go to Settings`,focusSearch:`Focus search`,openUploadModal:`Open upload modal`,clearSelection:`Clear selection / blur input`,contextMenu:`Context menu on cards`,refreshProfiles:`Refresh profiles`,newProfile:`New profile`,exitSelectionMode:`Exit selection mode`,showHelp:`Show this help`},footer:`Press Esc or click outside to close`},notificationLog:{title:`Notification Log`,events:{printStarted:`Print Started`,printComplete:`Print Complete`,printFailed:`Print Failed`,printStopped:`Print Stopped`,progress:`Progress`,printerOffline:`Printer Offline`,printerError:`Printer Error`,lowFilament:`Low Filament`,maintenanceDue:`Maintenance Due`,test:`Test`},timeAgo:{justNow:`Just now`,minutesAgo:`{{minutes}}m ago`,hoursAgo:`{{hours}}h ago`}},restoreBackup:{title:`Restore Backup`,restoring:`Restoring...`,restoreComplete:`Restore Complete`,restoreFailed:`Restore Failed`,importSettings:`Import settings from a backup file`,pleaseWait:`Please wait while your data is being restored`,clickToSelect:`Click to select backup file (.json or .zip)`,howDuplicateHandling:`How duplicate handling works:`,categories:{printers:`Printers`,smartPlugs:`Smart Plugs`,notificationProviders:`Notification Providers`,filaments:`Filaments`,archives:`Archives`,pendingUploads:`Pending Uploads`,settingsTemplates:`Settings & Templates`},matchingInfo:{printers:`matched by serial number`,smartPlugs:`matched by IP address`,notificationProviders:`matched by name`,filaments:`matched by name + type + brand`,archives:`matched by content hash`,pendingUploads:`matched by filename`,settingsTemplates:`always overwritten`},replaceExisting:`Replace existing data`,keepExisting:`Keep existing data`,replaceDescription:`Overwrite items that already exist with backup data`,keepDescription:`Only restore items that don't already exist`,caution:`Caution:`,cautionText:`Overwriting will replace your current configurations with backup data. Printer access codes are never overwritten for security.`,itemsRestored:`Items Restored`,itemsSkipped:`Items Skipped`,restored:`Restored`,skipped:`Skipped (already exist)`,filesLabel:`Files (3MF, thumbnails, etc.)`,newApiKeysGenerated:`New API Keys Generated`,newApiKeysWarning:`These keys are only shown once. Copy them now!`,processingBackup:`Processing backup file...`,noDataFound:`No data was found to restore in the backup file.`,failedToRestore:`Failed to restore backup. Please check the file format.`},backupExport:{title:`Export Backup`,selectData:`Select data to include`,selectAll:`Select All`,selectNone:`Select None`,categoryDescriptions:{settings:`Language, theme, update preferences`,notifications:`ntfy, Pushover, Discord, etc.`,templates:`Custom message templates`,smartPlugs:`Tasmota plug configurations`,externalLinks:`Sidebar links to external services`,printers:`Printer info (access codes excluded)`,plateDetection:`Empty plate reference images`,filaments:`Filament types and costs`,maintenance:`Custom maintenance schedules`,archives:`All print data + files (3MF, thumbnails, photos)`,projects:`Projects, BOM items, and attachments`,pendingUploads:`Virtual printer uploads awaiting review`,apiKeys:`Webhook API keys (new keys generated on import)`},requiresPrinters:`Requires Printers to be selected`,zipFileWarning:`ZIP file will be created.`,zipFileDescription:`Includes all 3MF files, thumbnails, timelapses, and photos. This may take a while and result in a large file.`,includeAccessCodes:`Include Access Codes`,includeAccessCodesDescription:`For transferring to another machine`,includeAccessCodesWarning:`Access codes will be included in plain text. Keep this backup file secure!`,categoriesSelected:`{{selectedCount}} categories selected`},pendingUploads:{placeholders:{notes:`Add notes about this print...`},discardUpload:`Discard Upload`,archiveAllUploads:`Archive All Uploads`,discardAllUploads:`Discard All Uploads`,archive:`Archive`,timeAgo:{justNow:`Just now`,minutesAgo:`{{minutes}}m ago`,hoursAgo:`{{hours}}h ago`,daysAgo:`{{days}}d ago`}},apiBrowser:{placeholders:{requestBody:`JSON request body...`,searchEndpoints:`Search endpoints...`}},configureAmsSlot:{title:`Configure AMS Slot`,slotConfigured:`Slot Configured!`,configuringSlot:`Configuring slot:`,slotLabel:`{{ams}} Slot {{slot}}`,searchPresets:`Search presets...`,colorPlaceholder:`Color name or hex (e.g., brown, FF8800)`,clearCustomColor:`Clear custom color`,noCloudPresets:`No cloud presets. Login to Bambu Cloud to sync.`,noPresetsAvailable:`No presets available. Login to Bambu Cloud or import local profiles.`,noMatchingPresets:`No matching presets found.`,custom:`Custom`,builtin:`Built-in`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Settings sent to printer`,filamentProfile:`Filament Profile`,kProfileLabel:`K Profile (Pressure Advance)`,filteringFor:`Filtering for: {{material}}`,noKProfile:`No K profile (use default 0.020)`,noMatchingKProfiles:`No matching K profiles found. Default K=0.020 will be used.`,selectFilamentFirst:`Select a filament profile first`,kFromCalibration:`K={{value}} from printer calibration`,customColorLabel:`Custom Color (optional)`,presetColors:`{{name}} colors:`,showLessColors:`Show less colors`,showMoreColors:`Show more colors`,clear:`Clear`,hexLabel:`Hex: #{{hex}}`,resetting:`Resetting...`,resetSlot:`Reset Slot`,cancel:`Cancel`,configuring:`Configuring...`,configureSlot:`Configure Slot`},githubBackup:{title:`Git Backup`,history:`History`,downloadBackup:`Download Backup`,restoreBackup:`Restore Backup`,noBackupsYet:`No backups yet`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Search tags...`,renameTag:`Rename tag`,deleteTag:`Delete tag`},notificationTemplates:{placeholders:{title:`Notification title...`,body:`Notification body...`}},batchTag:{placeholders:{newTag:`Enter new tag...`}},photoGallery:{deletePhoto:`Delete Photo`},filamentHoverCard:{copySpoolUuid:`Copy spool UUID`},kProfilesView:{hasNote:`Has note`,copyProfile:`Copy profile`},layout:{openMenu:`Open menu`,noPermissionSystemInfo:`You do not have permission to view system information`},dashboard:{dragToReorder:`Drag to reorder`,hideWidget:`Hide widget`},notificationProviderCard:{deleteNotificationProvider:`Delete Notification Provider`},fileManagerModal:{closeFileManager:`Close file manager`,sortFiles:`Sort files`,goToParentFolder:`Go to parent folder`,threeView:`3D View`},embeddedCameraViewer:{refreshStream:`Refresh stream`,close:`Close`,zoomOut:`Zoom out`,resetZoom:`Reset zoom`,zoomIn:`Zoom in`,dragToResize:`Drag to resize`},timelapseViewer:{skipBack5s:`Skip back 5s`,skipForward5s:`Skip forward 5s`},notificationProviders:{descriptions:{email:`SMTP email notifications`,telegram:`Notifications via Telegram bot`,discord:`Send to Discord channel via webhook`,ntfy:`Free, self-hostable push notifications`,pushover:`Simple, reliable push notifications`,callmebot:`Free WhatsApp notifications via CallMeBot`,webhook:`Generic HTTP POST to any URL`}},logViewer:{searchPlaceholder:`Search message or logger name...`,noLogEntries:`No log entries found`},switchbarPopover:{noSwitchesInSwitchbar:`No switches in switchbar`},projectPageModal:{placeholders:{title:`Title`,designer:`Designer`,license:`License`,description:`Enter description...`,profileTitle:`Profile Title`,profileDescription:`Profile description...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Waiting`,justNow:`Just now`,now:`Now`,minsAgo:`{{count}}m ago`,inMins:`in {{count}}m`,hoursAgo:`{{count}}h ago`,inHours:`in {{count}}h`,daysAgo:`{{count}}d ago`,inDays:`in {{count}}d`},spoolbuddy:{nav:{dashboard:`Dashboard`,ams:`AMS`,inventory:`Inventory`,writeTag:`Write`,settings:`Settings`},status:{nfcReady:`NFC Ready`,nfcOff:`NFC Off`,offline:`Offline`,online:`Online`,noPrinters:`No printers`,deviceOffline:`Device Offline`,waitingConnection:`Waiting for device connection...`,systemReady:`System Ready`,status:`Status`},dashboard:{readyToScan:`Ready to scan`,idleMessage:`Place a spool on the scale to identify it`,nfcHint:`NFC tag will be read automatically`,device:`Device`,syncWeight:`Sync Weight`,weightSynced:`Synced!`,unknownTag:`Unknown Tag`,newTag:`New Tag Detected`,onScale:`on scale`,linkSpool:`Link to Spool`,linkTagTitle:`Link Tag to Spool`,linkTag:`Link Tag`,selectSpool:`Select a spool to link this tag to:`,noUntagged:`No spools without tags found`,tagDetected:`Tag detected`,noTag:`No tag`,tagId:`Tag`,grossWeight:`Gross weight`,spoolSize:`Spool size`,close:`Close`,currentSpool:`Current Spool`,plateReady:`Plate ready: {{name}}`,plateReadyLabel:`Plates ready to clear`,plateClearAction:`Clear`,plateClearedToast:`Plate marked as cleared`,plateClearFailed:`Could not mark plate as cleared`},modal:{spoolDetected:`Spool Detected`,assignToAms:`Assign to AMS`,syncWeight:`Sync Weight`,weightSynced:`Synced!`,syncing:`Syncing...`,newTagDetected:`New Tag Detected`,addToInventory:`Add to Inventory`,assignToAmsTitle:`Assign to AMS`,selectSlot:`Select a slot`,assign:`Assign`,assigning:`Assigning...`,assignSuccess:`Assigned!`,assignPendingInsert:`Assigned. Slot will configure when you insert the spool.`,assignError:`Failed to assign spool. Please try again.`,noPrinterSelected:`Select a printer...`,noAmsDetected:`No AMS detected on this printer`,slot:`Slot`},weight:{noReading:`No reading`,stable:`Stable`,measuring:`Measuring...`,tare:`Tare`,calibrate:`Calibrate`},spool:{remaining:`Remaining`,material:`Material`,brand:`Brand`,color:`Color`,coreWeight:`Core`,labelWeight:`Label`,scaleWeight:`Scale`,netWeight:`Net`,lastUsed:`Last used`},ams:{noData:`No AMS detected`,connectAms:`Connect an AMS to see filament slots`,noPrinter:`No printer selected`,selectPrinter:`Select a printer from the top bar`,printerDisconnected:`Printer disconnected`,humidity:`Humidity`,level:`Level`,active:`Active`,slot:`Slot`,empty:`Empty`},inventory:{search:`Search spools...`,empty:`No spools in inventory`,noResults:`No matching spools`,spools:`spools`,addSpool:`Add Spool`},settings:{tabDevice:`Device`,tabDisplay:`Display`,tabScale:`Scale`,tabUpdates:`Updates`,nfcReader:`NFC Reader`,type:`Type`,connection:`Connection`,notConnected:`N/A`,deviceInfo:`Device Info`,hostname:`Host`,uptime:`Uptime`,systemConfig:`Backend & Auth`,backendUrl:`Bambuddy Backend URL`,apiToken:`API Token`,apiTokenPlaceholder:`Enter API token`,saveConfig:`Save Config`,systemQueued:`Config queued.`,nfcDiagnostic:`NFC Diagnostic`,scaleDiagnostic:`Scale Diagnostic`,readTagDiagnostic:`Read Tag Diagnostic`,testNfc:`Test reader`,testScale:`Test accuracy`,testReadTag:`Read tag`,systemFieldsRequired:`Backend URL is required.`,brightness:`Brightness`,saved:`Saved`,noBacklight:`No DSI backlight detected. Brightness control requires a DSI display.`,screenBlank:`Screen Blank Timeout`,screenBlankDesc:`Screen turns off after inactivity. Touch to wake.`,displayNote:`Brightness is applied as a software filter.`,scaleCalibration:`Scale Calibration`,currentWeight:`Current weight`,tareOffset:`Tare`,calFactor:`Factor`,knownWeight:`Known weight`,calStep1:`Remove all items from the scale and press Set Zero.`,calStep2:`Place known weight on scale.`,setZero:`Set Zero`,calibrateNow:`Calibrate`,calibrated:`Calibrated`,tareSet:`Tare command sent. Waiting for device...`,tareComplete:`Tare complete!`,tareTimedOut:`Tare timed out — is the SpoolBuddy daemon running?`,tareFailed:`Failed to send tare command`,zeroSet:`Zero point set. Place known weight on scale.`,calibrationDone:`Calibration complete!`,calibrationFailed:`Calibration failed`,lastCalibrated:`Last calibrated`,stable:`Stable`,settling:`Settling...`,firmware:`Firmware`,scale:`Scale`,noDevice:`No SpoolBuddy device found`,daemonVersion:`Daemon Version`,currentVersion:`Current`,versionPending:`Waiting for daemon...`,checking:`Checking...`,checkUpdates:`Check for Updates`,updateAvailable:`Update available`,updateInstructions:`Update via SSH: run the SpoolBuddy install script to upgrade.`,upToDate:`Up to date`,includeBeta:`Include beta versions`},writeTag:{tabExisting:`Existing Spool`,tabNew:`New Spool`,tabReplace:`Replace Tag`,searchPlaceholder:`Search by material, color, brand...`,noUntaggedSpools:`No spools without tags`,noTaggedSpools:`No spools with tags`,selectSpool:`Select a spool, then place a blank NTAG on the reader`,placeTag:`Place an NTAG on the reader`,tagReady:`Tag detected — ready to write`,writeTag:`Write Tag`,replaceTag:`Replace Tag`,writing:`Writing tag...`,waiting:`Waiting for SpoolBuddy...`,writeSuccess:`Tag written successfully!`,writeFailed:`Write failed`,queueFailed:`Failed to queue write command`,tryAgain:`Try Again`,cancel:`Cancel`,replaceWarning:`Old tag will be unlinked. New tag will replace it.`,deviceOffline:`SpoolBuddy is offline`,material:`Material`,colorName:`Color Name`,color:`Color`,brand:`Brand`,weight:`Weight (g)`,createSpool:`Create Spool`,creating:`Creating...`,spoolCreated:`Spool created! Ready to write.`,createFailed:`Failed to create spool`,incompleteDataWarning:`Tag written with incomplete Spoolman data`},quickMenu:{printerPower:`Printer Power`,systemControls:`System`,restartDaemon:`Restart Daemon`,restartBrowser:`Restart Browser`,reboot:`Reboot`,shutdown:`Shutdown`,swipeToClose:`Swipe down to close`,confirmTitle:`Confirm`,confirmShutdown:`Are you sure you want to shut down the SpoolBuddy? You will need physical access to turn it back on.`,confirmReboot:`Are you sure you want to reboot the SpoolBuddy?`,confirmRestartDaemon:`Restart the SpoolBuddy daemon? NFC and scale will be temporarily unavailable.`,confirmRestartBrowser:`Restart the kiosk browser? The display will briefly go blank.`,confirm:`Confirm`,confirmPlugOn:`Turn on {{name}}?`,confirmPlugOff:`Turn off {{name}}?`,turnOn:`Turn On`,turnOff:`Turn Off`}},diagnostic:{modalTitle:`Connection diagnostic — {{name}}`,running:`Running diagnostic...`,runningElapsed:`Running diagnostic... ({{elapsed}}s)`,waitingForReportHint:`Listening for the printer to publish a status report — this can take up to {{max}} seconds.`,runFailed:`Diagnostic could not run: {{error}}`,retry:`Run again`,runButton:`Run diagnostic`,sectionTitle:`Connection Diagnostic`,sectionDescription:`Check why a printer won't connect or won't print — port reachability, LAN developer mode, Docker network mode, and credentials.`,noPrinters:`No printers configured.`,overall:{ok:`No problems found — the printer connection looks healthy.`,warnings:`The printer should work, but some things need attention.`,problems:`Found problems that explain why the printer won't connect or print.`},check:{port_mqtt:{title:`Control port (MQTT 8883)`,pass:`Reachable — the printer is accepting control connections.`,fail:`Port 8883 is unreachable. The printer is powered off, on a different IP address, or a firewall is blocking it. Verify the printer IP and that nothing blocks port 8883.`},port_ftps:{title:`File transfer port (FTPS 990)`,pass:`Reachable — sending print files will work.`,warn:`Port 990 is unreachable. Monitoring may still work, but sending prints to the printer will fail. Make sure port 990 is not blocked.`},external_storage:{title:`Store sent files on external storage (install step 4)`,pass:`The printer reports this option is on — sent files will be stored on the SD card and archives will have thumbnails and slicer metadata.`,fail:`The printer reports this option is off. Enable "Store sent files on external storage" — on newer firmware (P2S 01.02 / Bambu Studio 2.6+) the toggle lives on the printer's Print Settings; on older versions it's in Bambu Studio / OrcaSlicer's Device tab. Without it, every archived print is missing its thumbnail and slicer metadata.`,skip:`Not checked — needs a live MQTT connection. On older slicers where this setting lives only in the slicer the printer never reports it, so this check will pass even when the option is off — verify install step 4 manually.`},port_rtsps:{title:`Camera port (RTSPS 322)`,pass:`Reachable — the camera stream will work.`,warn:`Port 322 is unreachable. The live camera view will not work. This does not affect printing.`},network_mode:{title:`Docker network mode`,pass:`Running in host network mode.`,warn:`Bambuddy is running in Docker bridge networking. Printer discovery and the Virtual Printer need host network mode — recreate the container with "network_mode: host".`,skip:`Not running in Docker — not applicable.`},subnet:{title:`Network subnet`,pass:`The printer and Bambuddy are on the same subnet.`,warn:`The printer ({{printer_ip}}) and Bambuddy ({{host_ip}}) are on different subnets. They may not reach each other unless routing between the subnets is configured.`,skip:`Subnet could not be determined — skipped.`},mqtt_auth:{title:`Printer credentials`,pass:`The printer accepted the connection.`,fail:`The printer is reachable but rejected the connection. The access code or serial number is most likely wrong. The access code changes every time Developer Mode is toggled — re-copy it from the printer screen.`,skip:`Not checked — the printer could not be reached.`},developer_mode:{title:`LAN Developer Mode`,pass:`Developer Mode is enabled.`,fail:`Developer Mode is OFF on the printer. Enable it in the printer's LAN settings — and confirm with OK. Without it, prints will not start.`,skip:`Could not be checked — requires a live connection to the printer.`},printer_publishing:{title:`Printer is publishing status`,pass:`The printer is publishing status updates — AMS, filaments, and K-profiles will mirror correctly to the slicer.`,fail:`The MQTT broker accepted the connection but the printer has not published any status reports. This is almost always a wrong or mis-cased serial number — the device//report topic is case-sensitive. Re-check the serial in printer settings against the screen on the printer.`,skip:`Could not be checked — requires a live connection to the printer.`}}},systemHealth:{sectionTitle:`System Health`,sectionDescription:`Scans recent logs for known issues you can usually fix yourself, before they turn into a support ticket.`,rescan:`Re-scan`,clean:`No known issues found in the last {{times}} log entries.`,logUnavailable:`File logging is disabled, so logs cannot be scanned. Enable file logging to use this check.`,learnMore:`How to fix`,fixLabel:`Fix:`,occurrences:`Seen {{times}}× — last at {{lastSeen}}`,category:{layer8:`You can fix this`,environment:`Environment`,bug:`Please report this`},signature:{"ftp-auth-rejected":{name:`Printer rejected the access code`,cause:`The printer refused the file-transfer login. The access code is wrong, or it changed after Developer Mode was toggled.`,fix:`Re-copy the access code from the printer screen (LAN settings) and update it in the printer's settings in Bambuddy.`},"ftp-connection-timeout":{name:`File-transfer connection timed out`,cause:`Bambuddy could not reach the printer's file-transfer port (FTPS 990). The port is blocked, or the printer is off or on another subnet.`,fix:`Make sure nothing blocks port 990 between Bambuddy and the printer, and that both are on the same network.`},"ftp-ssl-error":{name:`Secure file-transfer handshake failed`,cause:`The TLS handshake with the printer's file-transfer server failed. This is often a firewall or outdated printer firmware.`,fix:`Update the printer firmware and check that no firewall or proxy intercepts the connection on port 990.`},"mqtt-connection-flapping":{name:`Printer connection keeps dropping`,cause:`The control connection (MQTT 8883) repeatedly disconnects and reconnects — usually a weak network path or a partially blocked port.`,fix:`Check the Wi-Fi signal at the printer, prefer a wired connection, and make sure port 8883 is reliably reachable.`},"camera-connection-refused":{name:`Camera stream unreachable`,cause:`The live camera could not be reached on port RTSPS 322. The port is blocked, or the camera or LAN liveview is off on the printer.`,fix:`Enable the camera and LAN liveview on the printer, and make sure port 322 is not blocked. This does not affect printing.`},"database-locked":{name:`Database write contention`,cause:`The SQLite database is hitting "database is locked" errors under load — common when running several printers at once.`,fix:`Switch Bambuddy to an external PostgreSQL database. See the PostgreSQL guide in the documentation.`}}},vpDiagnostic:{title:`Setup check — {{name}}`,runButton:`Run setup check`,running:`Running setup check...`,runFailed:`Could not run the setup check: {{error}}`,retry:`Run again`,overall:{ok:`All checks passed — this virtual printer is set up correctly.`,warnings:`The virtual printer should work, but some things need attention.`,problems:`Found problems that explain why the slicer can't see or use this virtual printer.`},check:{enabled:{title:`Virtual printer enabled`,fail:`This virtual printer is switched off. Toggle it on to make it discoverable.`},running:{title:`Services running`,fail:`The virtual printer is enabled but its services are not running. Check the Bambuddy log — a bind IP conflict or a permission error usually stops them.`},bind_interface:{title:`Bind network interface`,fail:`The bind interface is not set, or no longer exists on this host. Pick a current interface in the Bind Interface dropdown.`},access_code:{title:`Access code set`,fail:`No access code is set. The slicer must be given the same 8-character access code you set here.`},target_printer:{title:`Target printer`,fail:`No target printer is selected. Proxy mode needs a real printer to forward to.`,warn:`The target printer is offline right now — proxying will resume once it reconnects.`},port_ftps:{title:`File-upload service (port {{port}})`,fail:`Nothing is listening on port {{port}} of the bind IP, so the slicer cannot upload files. A port conflict on this interface is the usual cause.`},port_mqtt:{title:`Control service (port {{port}})`,fail:`Nothing is listening on port {{port}} of the bind IP, so the slicer cannot connect or show status.`},port_bind:{title:`Discovery service (port {{port}})`,fail:`Nothing is listening on port {{port}} of the bind IP, so the slicer's discovery handshake fails.`},certificate:{title:`TLS certificate`,pass:`Certificate ready. Make sure the Bambuddy CA certificate (above) is imported into your slicer's trust store.`,fail:`The TLS certificate for this virtual printer is missing. Check that the Bambuddy data directory is writable.`}}},bugReport:{title:`Report a Bug`,description:`Description`,descriptionPlaceholder:`What went wrong? Please describe the issue...`,email:`Email (optional)`,emailPlaceholder:`your@email.com`,emailPrivacy:`If provided, your email will be included in a collapsed section of the GitHub issue so the maintainer can follow up.`,screenshot:`Screenshot`,uploadOrPaste:`Upload, paste, or drag an image`,dataCollectedSummary:`What data is included in the report?`,dataIncluded:`Included:`,dataIncludedList:`App version, OS, architecture, Python version, database stats (counts only), printer models, nozzle counts, firmware versions, connectivity status, integration status (Spoolman, MQTT, HA), non-sensitive settings, network interface count, Docker details, dependency versions.`,dataNeverIncluded:`Never included:`,dataNeverIncludedList:`Printer names, serial numbers, access codes, passwords, IP addresses, email addresses, API keys, tokens, webhook URLs, hostnames, or usernames.`,submit:`Submit`,startLogging:`Start Debug Logging`,stepEnableLogging:`Debug logging enabled`,stepReproduce:`Reproduce the issue now`,stepStopLogging:`Stop & submit report`,stopAndSubmit:`Stop & Submit`,maxDuration:`Auto-stops after {{minutes}} min`,stoppingLogs:`Collecting logs & submitting...`,submitting:`Submitting bug report...`,submittingStepConnection:`Running printer connectivity checks`,submittingStepVirtualPrinters:`Running virtual-printer setup checks`,submittingStepLogScan:`Scanning recent logs for known issues`,submittingStepSubmit:`Submitting report to GitHub`,submitSuccess:`Bug report submitted successfully!`,submitFailed:`Failed to submit bug report`,diagnosticChecking:`Checking printer connections...`,diagnosticHealthy:`Connection check passed — no problems found on your printers.`,diagnosticSummary:`{{problems}} of {{total}} printers have connection issues`,diagnosticIntro:`One or more printers have a connection problem that may be causing your issue. Expand a printer below to see the fix — resolving it could solve the problem without a bug report. You can still submit a report below.`,logHealthSummary:`Known issues found in your logs`,logHealthIntro:`Recent logs match known problems. Check the fixes below — resolving them could solve your issue without a bug report. You can still submit a report below.`,thankYou:`Thank you!`,submitted:`Your bug report has been submitted.`,viewIssue:`View Issue`,unexpectedError:`An unexpected error occurred`},failureDetection:{title:`AI Failure Detection`,description:`Monitor prints with a self-hosted Obico ML API and act on detected failures automatically.`,mlUrl:`Obico ML API URL`,mlUrlHint:`Base URL of your self-hosted Obico ml_api container (e.g. http://192.168.1.10:3333).`,test:`Test`,testSuccess:`ML API reachable and healthy.`,testFailed:`Could not reach the ML API.`,sensitivity:`Sensitivity`,sensitivityLow:`Low (fewer false positives)`,sensitivityMedium:`Medium (balanced)`,sensitivityHigh:`High (detect early, more false positives)`,sensitivityHint:`Adjusts the confidence thresholds that trigger warnings and failures.`,action:`Action on detected failure`,actionNotify:`Notify only`,actionPause:`Pause print`,actionPauseOff:`Pause and cut power`,pollInterval:`Poll interval (seconds)`,pollIntervalHint:`How often to check each printer while it is printing. Minimum 5s, maximum 120s.`,externalUrlMissing:`External URL is not set.`,externalUrlHint:`The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.`,perPrinterTitle:`Monitored Printers`,perPrinterHint:`Choose which printers the detection service watches.`,monitorAll:`Monitor all connected printers`,statusTitle:`Status`,serviceRunning:`Service running`,thresholds:`Low / High thresholds`,activePrinters:`Active prints`,noActivePrints:`No prints currently running.`,historyTitle:`Recent Detections`,noHistory:`No detections yet.`},makerworld:{title:`MakerWorld`,description:`Paste a MakerWorld model URL to import and print it directly from Bambuddy — without leaving for the Bambu Handy app.`,pasteUrlHeader:`Import from MakerWorld`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… or paste any MakerWorld link`,resolveButton:`Resolve`,signInRequiredTitle:`Bambu Cloud sign-in required to download`,signInRequiredBody:`You can browse model details anonymously, but MakerWorld requires a Bambu Cloud account to download 3MF files.`,openCloudSettings:`Open Cloud settings`,untitledModel:`Untitled model`,byCreator:`by {{name}}`,downloadsCount:`{{count}} downloads`,licensePrefix:`License`,alreadyImported:`Already in library`,openOnMakerworld:`Open on MakerWorld`,alreadyInLibrary:`This model is already in your library — find it in File Manager → MakerWorld`,importSuccess:`Imported {{filename}} — saved to File Manager → MakerWorld`,platesHeader:`Plates ({{count}})`,plateDefaultName:`Plate {{n}}`,materialCount:`{{count}} filaments`,amsRequired:`AMS required`,slicedFor:`Sliced for {{printer}}`,alsoCompatible:`Also marked compatible: {{printers}}`,importToLibrary:`Save`,sliceIn:`Save & Slice in {{slicer}}`,disclaimer:`MakerWorld integration uses community-documented API endpoints. Bambuddy is not affiliated with or endorsed by MakerWorld or Bambu Lab.`,lastImportSuccess:`Imported to your library`,lastImportAlreadyInLibrary:`Already in your library`,viewInLibrary:`View in File Manager`,openInBambuStudio:`Open in Bambu Studio`,openInOrcaSlicer:`Open in OrcaSlicer`,importTo:`Import to file manager`,recentImportsHeader:`Recent imports`,phaseResolving:`Resolving`,phaseDownloading:`Downloading`,folderAuto:`MakerWorld (default)`,importAll:`Import all`,importAllProgress:`Importing {{current}}/{{total}}`,openGallery:`Open image gallery`,galleryPrev:`Previous image`,galleryNext:`Next image`,deleteImport:`Remove from library`,importDeleting:`Removing…`,importDeleted:`Removed from library`,confirmDelete:`Remove {{filename}} from the library? This deletes the local file but the plate can be re-imported from MakerWorld.`,errors:{resolveFailed:`Could not resolve that MakerWorld URL.`,downloadFailed:`Download failed. Please try again.`,deleteFailed:`Could not remove the file from the library.`}},gcodeViewer:{back:`Back`,backToArchives:`Back to Print Archives`,backToFiles:`Back to File Manager`},libraryTrash:{title:`Trash`,headerButton:`Trash`,headerTooltip:`View files moved to the trash`,backToFiles:`Back to File Manager`,subtitleAdmin:`Deleted files stay here for {{days}} days, then auto-delete. This view shows trashed files for all users.`,subtitleUser:`Deleted files stay here for {{days}} days, then auto-delete.`,loading:`Loading trash…`,loadError:`Could not load the trash.`,empty:`The trash is empty.`,summary:`{{count}} files · {{size}}`,emptyTrash:`Empty trash`,restore:`Restore`,purgeNow:`Delete now`,autoPurgeIn:`Auto-deletes in {{when}}`,days:`days`,retentionLabel:`Auto-delete after`,selectAll:`Select all`,selectOne:`Select {{filename}}`,selectionCount:`{{count}} selected`,bulkRestore:`Restore selected`,bulkPurge:`Delete selected`,col:{filename:`File`,folder:`Folder`,size:`Size`,deleted:`Moved to trash`,autoPurge:`Auto-deletes`,owner:`Owner`,actions:`Actions`},confirm:{purgeTitle:`Delete permanently?`,purgeBody:`{{filename}} will be deleted from disk and cannot be restored.`,emptyTitle:`Empty the trash?`,emptyBody:`All {{count}} files will be deleted from disk. This cannot be undone.`,bulkPurgeTitle:`Delete selected files permanently?`,bulkPurgeBody:`The {{count}} selected files will be deleted from disk and cannot be restored.`,cta:`Delete permanently`},toast:{restored:`File restored.`,restoreFailed:`Could not restore the file.`,purged:`File deleted permanently.`,purgeFailed:`Could not delete the file.`,emptied:`Deleted {{count}} file(s) from trash.`,emptyFailed:`Could not empty the trash.`,retentionSaved:`Auto-delete set to {{days}} days.`,retentionFailed:`Could not save retention setting.`,bulkRestored:`Restored {{count}} file(s).`,bulkPurged:`Deleted {{count}} file(s).`}},libraryPurge:{title:`Purge old files`,headerButton:`Purge old`,headerTooltip:`Bulk-move old files to trash`,description:`Sweep old files out of your library in one shot. Files with a print history are aged by their last-printed date; files that were never printed are aged by their upload date.`,ageLabel:`Move files older than`,days:`days`,includeNeverPrinted:`Include files that have never been printed`,effectsTitle:`What happens when you click Purge`,effect1:`Matching files are moved to Trash — they are not deleted from disk yet.`,effect2:`You can restore them from Trash at any time until the retention window expires.`,effect3:`After retention, the trash sweeper permanently removes them from disk.`,effect4:`Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.`,previewLoading:`Checking how many files match…`,previewFailed:`Could not preview the purge.`,previewSummary:`{{count}} files · {{size}} would move to trash`,andMore:`…and {{count}} more`,warning:`Trashed files still count against storage until the retention window expires. Empty the Trash afterwards to free disk immediately.`,confirmCta:`Move {{count}} to trash`,purging:`Moving to trash…`,toast:{success:`Moved {{count}} file(s) to trash.`,failed:`Could not purge files.`}},libraryAutoPurge:{enableLabel:`Auto-purge old files`,enableDescription:`Runs the admin purge once per day. Files go to Trash first — they are not deleted immediately.`,ageLabel:`Auto-purge files older than`,ageDescription:`Minimum 7 days, maximum 10 years. Uses the same age rule as the manual Purge button.`,days:`days`,includeNeverPrinted:`Include files that have never been printed`,saveFailed:`Could not save auto-purge settings.`},archivePurge:{headerButton:`Purge old`,headerTooltip:`Bulk-delete old archives`,title:`Purge old archives`,description:`Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.`,ageLabel:`Delete archives not printed in the last`,days:`days`,effectsTitle:`What happens when you click Purge`,effect1:`Each matching archive is hidden from the listings and its files are removed from disk (3MF, thumbnail, timelapse, source 3MF, F3D design file, photos).`,effect2:`The archive row stays in the database so Quick Stats keeps the filament, time, cost, and energy contribution — same as the single-archive delete default.`,effect3:`Tick "Also remove from statistics" below to drop the Quick Stats contribution too (matches the single-archive delete option). That path is irreversible.`,effect4:`Reprinting an archive refreshes its age clock, so archives you still use are safe.`,purgeStatsLabel:`Also remove from statistics`,purgeStatsHint:`Drops the matching archives from Quick Stats (filament, time, cost, energy). Without this, Quick Stats keeps every contribution and only the files leave disk.`,previewLoading:`Checking how many archives match…`,previewFailed:`Could not preview the purge.`,previewSummary:`{{count}} archives · {{size}} would be removed`,andMore:`…and {{count}} more`,warning:`Files are removed from disk and cannot be restored. Download or favourite anything you want to keep before continuing.`,confirmCta:`Remove {{count}} archive(s)`,purging:`Removing…`,toast:{success:`Removed {{count}} archive(s).`,failed:`Could not purge archives.`}},archiveAutoPurge:{enableLabel:`Auto-purge old archives`,enableDescription:`Once per day, hides archives from the listings and removes their files from disk when they have not been printed within the threshold. Reprinting an archive resets the clock.`,ageLabel:`Auto-delete archives not printed in the last`,ageDescription:`Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Removes the 3MF, thumbnail, timelapse, source 3MF, F3D, and photos.`,days:`days`,purgeStatsLabel:`Also remove from statistics`,purgeStatsDescription:`When enabled, the daily sweeper also drops each purged archive from Quick Stats (filament, time, cost, energy). Default off — Quick Stats keeps the contribution, only the files leave disk.`,runNow:`Purge archives now`,saveFailed:`Could not save auto-purge settings.`},cameraTokens:{title:`Camera API Tokens`,navTitle:`Camera API tokens`,description:`Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.`,loading:`Loading…`,confirmRevoke:{title:`Revoke this token?`,body:`Any device using "{{name}}" will lose access immediately. This cannot be undone.`,cancel:`Cancel`,confirm:`Revoke`},create:{title:`Create new token`,nameLabel:`Token name`,namePlaceholder:`e.g. Home Assistant`,daysLabel:`Days until expiry`,submit:`Create`,hint:`Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now.`},created:{title:`Token created — copy it now`,warning:`This is the only time this token will be visible. After you close this dialog you can never view it again.`,copy:`Copy`,dismiss:`I've saved it`},list:{myTitle:`My tokens`,allTitle:`All users (admin view)`,empty:`No tokens yet.`,name:`Name`,owner:`Owner`,prefix:`Prefix`,created:`Created`,expires:`Expires`,lastUsed:`Last used`,revoke:`Revoke`,expired:`Expired`},toast:{created:`Token created`,createFailed:`Failed to create token`,revoked:`Token revoked`,revokeFailed:`Failed to revoke token`,loadFailed:`Failed to load tokens`,copied:`Copied to clipboard`,copyFailed:`Copy failed — select and copy manually`}},forecast:{title:`Forecast`,noSpools:`No active spools found. Add spools to your inventory to see forecast data.`,noUsageData:`No usage data available — cannot project stock timeline.`,sku:`SKU`,material:`Material`,stock:`Stock`,dailyRate:`Rate`,daysLeft:`Days Left`,emptyBy:`Empty By`,reorderBy:`Reorder By`,actions:`Actions`,trend:`Trend`,estimated:`Est.`,noData:`No data`,timeframe:`Timeframe`,chartTitle:`Projected Stock — Top 5 Materials`,dashedLinesROP:`Dashed lines = reorder points`,stockLevel:`Stock Level`,reorderPoint:`Reorder Point`,safetyMargin:`Safety Margin`,trendLegend:`Trend (history-based, 95% service level)`,estimatedLegend:`Estimated (weight delta)`,noDataLegend:`No data`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`Safety stock`,stockArrivalLegend:`Stock arrival`,stockoutLegend:`Stockout`,alertCount_one:`{{count}} alert`,alertCount_other:`{{count}} alerts`,order:`Order`,save:`Save`,cancel:`Cancel`,settingsSaved:`Settings saved`,failedSaveSettings:`Failed to save settings`,globalLeadTimeSaved:`Global lead time saved`,globalLeadTime:`Global lead time`,globalLeadTimeHint:`Global lead time floor — used in reorder point calculation for all SKUs`,skuLeadTimeOverride:`SKU Lead Time Override`,skuLeadTimeHint:`0 = use global lead time. Set >0 to override for this SKU.`,safetyMarginLabel:`Safety Margin`,effectiveLeadTime:`Effective Lead Time`,effectiveLeadTimeHint:`max(global {{global}}d, SKU {{sku}}d)`,reorderPointHint:`d̄ × LT + safety margin — order when stock hits this level`,safetyMarginHint:`Statistical safety stock (z=1.65 × σ × √LT) + user-defined buffer`,safetyMarginHintDays:`Buffer added on top of statistical safety stock.{{approx}}`,safetyMarginHintDaysApprox:` ≈ {{g}}g at current rate.`,safetyMarginHintG:`Fixed weight buffer added on top of statistical safety stock.{{approx}}`,safetyMarginHintGApprox:` ≈ {{days}}d at current rate.`,individualSpools:`Individual spools`,labelWeight:`Label`,spoolCount_one:`{{count}} spool`,spoolCount_other:`{{count}} spools`,stockBreakRisk:`Stock break risk`,stockBreakDetail:`{{days}}d remaining, lead time {{lt}}d.`,stockBreakBefore:`Stock break before replenishment`,reorderNow:`Reorder now`,reorderTriggerPassed:`Trigger date {{date}} has passed.`,shoppingList:`Shopping List`,shoppingListItems_one:`({{count}} item)`,shoppingListItems_other:`({{count}} items)`,shoppingListEmpty:`Shopping list is empty. Click the cart icon on any row to add items.`,addToCart:`Add to shopping list`,alertsSnoozed:`Mute alerts for this SKU`,alertsEnabled:`Unmute alerts for this SKU`,addedToCart:`Added to shopping list`,failedAddItem:`Failed to add item`,listView:`List`,logisticsView:`Logistics`,qty:`Qty`,weight:`Weight`,leadTime:`Lead Time`,expectedRestock:`Expected Restock`,status:`Status`,note:`Note`,pending:`Pending`,purchased:`Purchased`,received:`Received`,markPurchased:`Mark as purchased`,markReceived:`Mark as received — adds spools to Stock inventory`,resetToPending:`Reset to pending`,remove:`Remove`,clearAll:`Clear all`,downloadCsv:`CSV`,addToCartTitle:`Add to Shopping List`,byQuantity:`By Quantity`,byDuration:`By Duration`,numberOfSpools:`Number of spools`,lastHowManyDays:`Should last how many days?`,noUsageQty:`No usage data — quantity set to 1.`,noteOptional:`Note (optional)`,notePlaceholder:`e.g. for project X, urgent…`,addNSpools_one:`Add {{count}} spool`,addNSpools_other:`Add {{count}} spools`,onArrival:`On Arrival`,stockBreakIn:`Stock break in {{days}}d.`,stockRunsOutBefore:`Stock runs out before the {{lt}}d lead time elapses.`,atRate:`At {{rate}}g/day you need`,moreSpools_one:`{{count}} more spool`,moreSpools_other:`{{count}} more spools`,bridgeGap:`to bridge the gap.`,noReadAccess:`You do not have permission to view inventory forecasts.`,noWriteAccess:`You do not have permission to modify forecast settings.`}}},de:{translation:{nav:{printers:`Drucker`,archives:`Archiv`,queue:`Druckwarteschlange`,stats:`Statistiken`,profiles:`Profile`,maintenance:`Wartung`,projects:`Projekte`,inventory:`Filament`,files:`Dateimanager`,makerworld:`MakerWorld`,notifications:`Benachrichtigungen`,settings:`Einstellungen`,system:`System`,collapseSidebar:`Seitenleiste einklappen`,expandSidebar:`Seitenleiste ausklappen`,update:`Aktualisieren`,updateAvailable:`Update verfügbar: v{{version}}`,updateAvailableBanner:`Version {{version}} ist verfügbar!`,viewUpdate:`Update anzeigen`,viewOnGithub:`Auf GitHub ansehen`,keyboardShortcuts:`Tastaturkürzel (?)`,switchToLight:`Zum hellen Modus wechseln`,switchToDark:`Zum dunklen Modus wechseln`,switchToSystem:`Zum Systemmodus wechseln`,smartSwitches:`Smart Switches`,logout:`Abmelden`,installApp:`App installieren`,installAppSuccess:`Bambuddy wurde installiert`},common:{save:`Speichern`,saving:`Speichern...`,cancel:`Abbrechen`,delete:`Löschen`,edit:`Bearbeiten`,add:`Hinzufügen`,close:`Schließen`,confirm:`Bestätigen`,loading:`Lädt...`,error:`Fehler`,errorLoading:`Fehler beim Laden`,retry:`Erneut versuchen`,success:`Erfolg`,warning:`Warnung`,enabled:`Aktiviert`,disabled:`Deaktiviert`,yes:`Ja`,no:`Nein`,on:`An`,off:`Aus`,all:`Alle`,none:`Keine`,search:`Suchen`,filter:`Filtern`,sort:`Sortieren`,refresh:`Aktualisieren`,download:`Herunterladen`,upload:`Hochladen`,uploading:`Hochladen...`,uploadFailed:`Hochladen fehlgeschlagen`,actions:`Aktionen`,status:`Status`,name:`Name`,description:`Beschreibung`,date:`Datum`,time:`Zeit`,hours:`Stunden`,minutes:`Minuten`,seconds:`Sekunden`,days:`Tage`,enable:`Aktivieren`,disable:`Deaktivieren`,permissions:`Berechtigungen`,noPrinters:`Keine Drucker konfiguriert`,noData:`Keine Daten verfügbar`,linkNotFound:`Link nicht gefunden`,required:`Erforderlich`,optional:`Optional`,dismiss:`Schließen`,apply:`Anwenden`,reset:`Zurücksetzen`,export:`Exportieren`,import:`Importieren`,clear:`Leeren`,selectAll:`Alle auswählen`,deselectAll:`Auswahl aufheben`,noChange:`— Keine Änderung —`,unchanged:`Unverändert`,unassigned:`Nicht zugewiesen`,unknown:`Unbekannt`,unknownError:`Unbekannter Fehler`,today:`Heute`,tomorrow:`Morgen`,asap:`Sofort`,overdue:`Überfällig`,now:`Jetzt`,collapse:`Einklappen`,expand:`Ausklappen`,viewArchive:`Archiv anzeigen`,viewInFileManager:`Im Dateimanager anzeigen`,addedBy:`Hinzugefügt von {{username}}`,prints:`Drucke`,more:`+{{count}} weitere`,ascending:`Aufsteigend`,descending:`Absteigend`,back:`Zurück`,copy:`Kopieren`,copied:`Kopiert!`,printer:`Drucker`,remove:`Entfernen`,type:`Typ`,print:`Drucken`,rename:`Umbenennen`,move:`Verschieben`,create:`Erstellen`,duplicate:`Duplizieren`,left:`Links`,right:`Rechts`},printers:{addPreflight:{checking:`Verbindung wird geprüft...`,warning:`Einige Verbindungsprüfungen sind fehlgeschlagen. Dieser Drucker wird möglicherweise als offline angezeigt. Prüfe die Punkte unten, behebe was möglich ist, oder speichere trotzdem.`,back:`Zurück`,saveAnyway:`Trotzdem speichern`},title:`Drucker`,addPrinter:`Drucker hinzufügen`,editPrinter:`Drucker bearbeiten`,deletePrinter:`Drucker löschen`,printerName:`Druckername`,serialNumber:`Seriennummer`,ipAddress:`IP-Adresse / Hostname`,accessCode:`Zugangscode`,model:`Modell`,nozzleCount:`Düsenanzahl`,autoArchive:`Automatische Archivierung`,status:{available:`Verfügbar`,idle:`Bereit`,printing:`Druckt`,paused:`Pausiert`,offline:`Offline`,problem:`Problem`,error:`Fehler`,finished:`Fertig`,unknown:`Unbekannt`},temperatures:{nozzle:`Düse`,bed:`Druckbett`,chamber:`Kammer`},heaterHistory:{title:`Heizungsverlauf`,openLabel:`Heizungsverlauf anzeigen`,nozzle:`Düse`,nozzle2:`Düse 2`,bed:`Druckbett`,chamber:`Kammer`,error:`Verlauf konnte nicht geladen werden`,empty:`Noch keine Daten aufgezeichnet`},progress:`{{percent}}% abgeschlossen`,timeRemaining:`Noch {{time}}`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,maintenanceOk:`Wartung OK`,maintenanceWarning:`{{count}} Warnung`,maintenanceWarning_plural:`{{count}} Warnungen`,maintenanceDue:`{{count}} fällig`,maintenanceDue_plural:`{{count}} fällig`,sort:{name:`Name`,status:`Status`,model:`Modell`,location:`Standort`,eta:`Restzeit`,ascending:`Aufsteigend sortieren`,descending:`Absteigend sortieren`},cardSize:{small:`Kleine Karten`,medium:`Mittlere Karten`,large:`Große Karten`,extraLarge:`Extra große Karten`},hideOffline:`Offline ausblenden`,nextAvailable:`Nächster verfügbar`,powerOn:`Einschalten`,offlinePrintersWithPlugs:`Offline-Drucker mit Smart-Plugs`,noPrintersConfigured:`Noch keine Drucker konfiguriert`,search:`Drucker suchen...`,noSearchResults:`Keine Drucker entsprechen deiner Suche oder deinen Filtern`,filter:{allStatuses:`Alle Status`,allLocations:`Alle Standorte`},toolbar:{filters:`Filter`,view:`Ansicht`,actions:`Aktionen`},readyToPrint:`Druckbereit`,external:`Extern`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Druckarchive löschen`,noLabel:`Keine Bezeichnung`,printPreview:`Druckvorschau`,width:`Breite`,height:`Höhe`,noObjectsFound:`Keine Objekte gefunden`,objectsLoadedOnPrintStart:`Objekte werden beim Druckstart geladen`,willBeSkipped:`Wird übersprungen`,name:`Name`,serialCannotBeChanged:`Seriennummer kann nicht geändert werden`,locationHelp:`Dient zur Gruppierung von Druckern und zum Filtern von Warteschlangenaufträgen`,wifiSignal:{veryWeak:`Sehr schwach`,weak:`Schwach`,fair:`Ausreichend`,good:`Gut`,excellent:`Ausgezeichnet`},maintenanceUpToDate:`Alle Wartungen aktuell - Klicken zum Anzeigen`,maintenance:{title:`In Wartung`,subtitle:`Dieser Drucker ist pausiert — keine Verbindung, nicht für die Warteschlange verfügbar, keine Benachrichtigungen.`,pillLabel:`Wartung`,exitButton:`Wartung beenden`,menuEnter:`In den Wartungsmodus wechseln`,menuExit:`Wartungsmodus beenden`,toastEntered:`{{name}} ist jetzt im Wartungsmodus`,toastExited:`{{name}} ist wieder online`,confirmMidPrintTitle:`Wartungsmodus während des Drucks aktivieren?`,confirmMidPrintMessage:`{{name}} druckt gerade. Der Wartungsmodus trennt die MQTT-Verbindung und beendet das Fortschritts-Tracking sowie Abschlussbenachrichtigungen für diesen Auftrag. Fortfahren?`,editFieldLabel:`Wartungsmodus`,editFieldHelp:`Wenn aktiviert, ist dieser Drucker von MQTT, Warteschlangenversand und Benachrichtigungen pausiert — nützlich für Reparaturen, parallele Bambuddy-Installationen oder temporäre Außerbetriebnahme.`},chamberLightOn:`Kammerbeleuchtung einschalten`,chamberLightOff:`Kammerbeleuchtung ausschalten`,files:`Dateien`,browseFiles:`Druckerdateien durchsuchen`,autoOffAfterPrint:`Automatisches Ausschalten nach Druck`,autoOffExecuted:`Auto-off wurde ausgeführt - Drucker einschalten zum Zurücksetzen`,hmsErrors:`HMS-Fehler`,viewHmsErrors:`{{count}} HMS-Fehler anzeigen`,resume:`Fortsetzen`,pause:`Pausieren`,stop:`Stoppen`,camera:`Kamera`,skipObject:`Objekt überspringen`,reconnect:`Neu verbinden`,forceRefresh:`Aktualisierung erzwingen`,forceRefreshSuccess:`Aktualisierung angefordert`,mqttDebug:`MQTT-Debug`,printerInformation:`Druckerinformationen`,copyToClipboard:`Kopieren`,copied:`Kopiert!`,state:`Zustand`,wifiSignalLabel:`WLAN-Signal`,developerMode:`Entwicklermodus`,enabled:`Aktiviert`,disabled:`Deaktiviert`,addedOn:`Hinzugefügt`,sdCard:`SD-Karte`,inserted:`Eingelegt`,notInserted:`Nicht eingelegt`,totalPrintHours:`Druckstunden`,activeNozzle:`Aktiv: {{nozzle}} Düse`,nozzleRack:`Düsenhalter`,nozzleDocked:`Angedockt`,nozzleMounted:`Montiert`,nozzleActive:`Aktiv`,nozzleIdle:`Inaktiv`,nozzleDiameter:`Durchmesser`,nozzleType:`Typ`,nozzleStatus:`Status`,nozzleFilament:`Filament`,nozzleWear:`Verschleiß`,nozzleMaxTemp:`Max. Temp`,nozzleSerial:`Seriennr.`,nozzleHardenedSteel:`Gehärteter Stahl`,nozzleStainlessSteel:`Edelstahl`,nozzleTungstenCarbide:`Wolframkarbid`,nozzleFlow:`Durchfluss`,nozzleHighFlow:`Hoher Durchfluss`,nozzleStandardFlow:`Standard`,firmwareUpdate:`Firmware-Update`,firmwareInstructions:`Gehen Sie auf dem Touchscreen des Druckers zu`,firmwareNav:`Navigieren Sie zu`,settings:`Einstellungen`,firmware:`Firmware`,discoverPrinters:`Drucker entdecken`,searching:`Suche...`,manualEntry:`Manuelle Eingabe`,addFromCloud:`Aus Cloud hinzufügen`,toast:{printerDeleted:`Drucker gelöscht`,missingSpoolAssignment:`Druck gestartet auf {{printer}}. Fehlende Spulenzuordnung für: {{slots}}`,printerAdded:`Drucker hinzugefügt`,printerUpdated:`Drucker aktualisiert`,failedToDelete:`Drucker konnte nicht gelöscht werden`,failedToAdd:`Drucker konnte nicht hinzugefügt werden`,connectionFailedNotAdded:`Keine Verbindung zum Drucker möglich. Prüfen Sie IP-Adresse, Seriennummer und Zugangscode und stellen Sie sicher, dass der Nur-LAN-Modus aktiv ist. Der Drucker wurde nicht hinzugefügt.`,failedToUpdate:`Drucker konnte nicht aktualisiert werden`,commandSent:`Befehl gesendet`,failedToSendCommand:`Befehl konnte nicht gesendet werden`,turnedOn:`{{name}} eingeschaltet`,failedToPowerOn:`{{name}} konnte nicht eingeschaltet werden`,scriptTriggered:`Skript ausgelöst`,printStopped:`Druck gestoppt`,printPaused:`Druck pausiert`,printResumed:`Druck fortgesetzt`,referenceDeleted:`Referenz gelöscht`,detectionAreaSaved:`Erkennungsbereich gespeichert`,failedToRunScript:`Skript konnte nicht ausgeführt werden`,failedToStopPrint:`Druck konnte nicht gestoppt werden`,failedToPausePrint:`Druck konnte nicht pausiert werden`,failedToResumePrint:`Druck konnte nicht fortgesetzt werden`,failedToControlChamberLight:`Kammerbeleuchtung konnte nicht gesteuert werden`,failedToSetSpeed:`Druckgeschwindigkeit konnte nicht eingestellt werden`,failedToUpdateSetting:`Einstellung konnte nicht aktualisiert werden`,failedToSkipObjects:`Objekte konnten nicht übersprungen werden`,failedToRereadRfid:`RFID konnte nicht erneut gelesen werden`,failedToCheckPlate:`Platte konnte nicht überprüft werden`,failedToUpdateLabel:`Bezeichnung konnte nicht aktualisiert werden`,failedToDeleteReference:`Referenz konnte nicht gelöscht werden`,failedToSaveDetectionArea:`Erkennungsbereich konnte nicht gespeichert werden`,plateCheckEnabled:`Plattenprüfung aktiviert`,plateCheckDisabled:`Plattenprüfung deaktiviert`,calibrationSaved:`Kalibrierung gespeichert!`,calibrationFailed:`Kalibrierung fehlgeschlagen`,rfidRereadInitiated:`RFID-Neueinlesen gestartet`,loadInitiated:`Filament wird geladen…`,unloadInitiated:`Filament wird entladen…`,failedToLoad:`Filament konnte nicht geladen werden`,failedToUnload:`Filament konnte nicht entladen werden`},connection:{connected:`Verbunden`,offline:`Offline`},plateStatus:{markCleared:`Platte als freigegeben markieren`,cleared:`Platte freigegeben`,notCleared:`Platte nicht freigegeben`,inUse:`Platte in Benutzung`},queue:{inQueue:`{{count}} Druck in Warteschlange`,inQueue_plural:`{{count}} Drucke in Warteschlange`},controls:`Steuerung`,rfid:{reread:`RFID neu lesen`},ams:{load:`Laden`,unload:`Entladen`},bedJog:{title:`Jog-Steuerung`,bed:`Bett`,step:`Schritt (mm)`,up:`Platte hoch`,down:`Platte runter`,disabledWhilePrinting:`Während des Drucks deaktiviert`,notHomedTitle:`Drucker ist nicht referenziert`,notHomedMessage:`Der Drucker wurde seit dem letzten Druck nicht referenziert. Führen Sie zuerst die automatische Referenzfahrt aus (parkt den Werkzeugkopf und referenziert dann X, Y und Z) oder bewegen Sie trotzdem — die Software-Endschalter werden dabei umgangen.`,homeZ:`Automatische Referenzfahrt`,moveAnyway:`Trotzdem bewegen`,homingStarted:`Drucker wird automatisch referenziert…`},permission:{noAdd:`Sie haben keine Berechtigung, Drucker hinzuzufügen`,noEdit:`Sie haben keine Berechtigung, Drucker zu bearbeiten`,noDelete:`Sie haben keine Berechtigung, Drucker zu löschen`,noControl:`Sie haben keine Berechtigung, Drucker zu steuern`,noFiles:`Sie haben keine Berechtigung, auf Druckerdateien zuzugreifen`,noAmsRfid:`Sie haben keine Berechtigung, AMS-RFID erneut zu lesen`,noSmartPlugControl:`Sie haben keine Berechtigung, Smart Plugs zu steuern`,noCamera:`Sie haben keine Berechtigung, Kameras anzuzeigen`},modal:{addTitle:`Drucker hinzufügen`,editTitle:`Drucker bearbeiten`,myPrinter:`Mein Drucker`,selectModel:`Modell auswählen...`,locationGroup:`Standort / Gruppe (optional)`,locationPlaceholder:`z.B. Werkstatt, Büro, Keller`,autoArchiveLabel:`Abgeschlossene Drucke automatisch archivieren`,fromPrinterSettings:`Aus Druckereinstellungen`,modelOptional:`Modell (optional)`,saveChanges:`Änderungen speichern`},skipObjects:{tooltip:`Objekte überspringen`,onlyWhilePrinting:`Objekte überspringen (nur während des Drucks)`,requiresMultiple:`Objekte überspringen (erfordert 2+ Objekte)`,title:`Objekte überspringen`,matchIdsInfo:`IDs mit Drucker-Display abgleichen`,printerShowsIds:`Der Druckerbildschirm zeigt Objekt-IDs auf der Bauplatte`,skipSelected:`Ausgewählte überspringen`,skipping:`Überspringe...`,noObjectsSelected:`Keine Objekte ausgewählt`,selectObjectsToSkip:`Wählen Sie Objekte aus, die Sie vom aktuellen Druck überspringen möchten`,skipped:`übersprungen`,objectsSkipped:`Objekte übersprungen`,activeCount:`{{count}} aktiv`,waitForLayer:`Warten Sie auf Schicht 2+ zum Überspringen von Objekten (aktuell Schicht {{layer}})`,skip:`Überspringen`,confirmTitle:`Objekt überspringen?`,confirmMessage:`Möchten Sie "{{name}}" wirklich überspringen? Dies kann nicht rückgängig gemacht werden.`},confirm:{deleteTitle:`Drucker löschen`,deleteMessage:`Möchten Sie "{{name}}" wirklich löschen? Alle Verbindungseinstellungen werden entfernt.`,deleteArchivesNote:`Der gesamte Druckverlauf für diesen Drucker wird dauerhaft gelöscht.`,keepArchivesNote:`Der Druckverlauf wird beibehalten, aber nicht mehr mit diesem Drucker verknüpft.`,stopTitle:`Druck stoppen`,stopMessage:`Möchten Sie den aktuellen Druck auf "{{name}}" wirklich stoppen? Der Druckauftrag wird abgebrochen.`,stopButton:`Druck stoppen`,pauseTitle:`Druck pausieren`,pauseMessage:`Möchten Sie den aktuellen Druck auf "{{name}}" wirklich pausieren?`,pauseButton:`Druck pausieren`,resumeTitle:`Druck fortsetzen`,resumeMessage:`Möchten Sie den Druck auf "{{name}}" fortsetzen?`,resumeButton:`Druck fortsetzen`,powerOnTitle:`Drucker einschalten`,powerOnMessage:`Möchten Sie die Stromversorgung für "{{name}}" wirklich EINSCHALTEN?`,powerOnButton:`Einschalten`,powerOffTitle:`Drucker ausschalten`,powerOffMessage:`Möchten Sie die Stromversorgung für "{{name}}" wirklich AUSSCHALTEN?`,powerOffWarning:`WARNUNG: "{{name}}" druckt gerade! Möchten Sie die Stromversorgung wirklich AUSSCHALTEN? Dies unterbricht den Druck und kann den Drucker beschädigen.`,powerOffButton:`Ausschalten`,haToggleTitle:`"{{name}}" umschalten`,haToggleMessage:`Home-Assistant-Entität {{entity}} umschalten? Das kann die Stromversorgung ausschalten, falls sie gerade an ist.`,haToggleWarning:`WARNUNG: "{{name}}" druckt gerade! Umschalten von {{entity}} kann die Stromversorgung trennen und den Druck abbrechen. Fortfahren?`,haToggleButton:`Umschalten`},bulk:{select:`Auswählen`,selectAll:`Alle auswählen`,selectByLocation:`Nach Standort auswählen`,selected:`{{count}} ausgewählt`,actions:{stop:`Stoppen`,pause:`Pausieren`,resume:`Fortsetzen`,clearPlate:`Druckbett leeren`,clearHMS:`Benachrichtigungen löschen`},confirm:{stopTitle:`{{count}} Drucke stoppen`,stopMessage:`Dies wird aktive Drucke auf {{count}} Drucker(n) abbrechen. Diese Aktion kann nicht rückgängig gemacht werden.`,stopButton:`Alle stoppen`,pauseTitle:`{{count}} Drucke pausieren`,pauseMessage:`Dies wird aktive Drucke auf {{count}} Drucker(n) pausieren.`,pauseButton:`Alle pausieren`,clearPlateTitle:`{{count}} Druckbetten leeren`,clearPlateMessage:`Dies wird das Druckbett auf {{count}} Drucker(n) leeren und kann wartende Aufträge starten.`,clearPlateButton:`Alle leeren`},success:`{{action}} auf {{count}} Drucker(n) abgeschlossen`,partial:`{{succeeded}} erfolgreich, {{failed}} fehlgeschlagen`,noneApplicable:`Keine ausgewählten Drucker sind im richtigen Zustand für diese Aktion`,selectByState:`Nach Status auswählen`},discovery:{title:`Drucker entdecken`,searching:`Suche...`,scanning:`Scanne...`,scanProgress:`Scanne... {{scanned}}/{{total}}`,foundPrinters:`{{count}} Drucker gefunden`,noPrintersFound:`Keine Drucker gefunden`,noPrintersFoundSubnet:`Keine Drucker im angegebenen Subnetz gefunden.`,noPrintersFoundNetwork:`Keine Drucker im Netzwerk gefunden.`,allConfigured:`Alle erkannten Drucker sind bereits konfiguriert.`,alreadyAdded:`Bereits hinzugefügt`,select:`Auswählen`,manualEntry:`Manuelle Eingabe`,addFromCloud:`Aus Cloud hinzufügen`,subnetToScan:`Zu scannendes Subnetz`,dockerNote:`Docker erkannt. Geben Sie das Subnetz Ihres Druckers in CIDR-Notation ein. Erfordert network_mode: host in docker-compose.yml.`,scanSubnet:`Subnetz nach Druckern scannen`,discoverNetwork:`Drucker im Netzwerk suchen`,scanningSubnet:`Subnetz wird nach Bambu-Druckern gescannt...`,scanningNetwork:`Netzwerk wird gescannt...`,serialRequired:`Seriennummer erforderlich`,unknown:`Unbekannt`,failedToStart:`Erkennung konnte nicht gestartet werden`,customSubnetOption:`Eigenes Subnetz...`,customSubnetLabel:`Eigenes Subnetz (CIDR)`,customSubnetNote:`Wähle ein eigenes Subnetz, wenn dein Drucker in einem anderen Netzwerk als dieser Server steht. Die Ports FTP (990) und MQTT (8883) müssen über die Routinggrenze erreichbar sein.`},drying:{start:`Trocknung starten`,stop:`Trocknung stoppen`,temperature:`Temperatur`,duration:`Dauer`,hours:`Stunden`,timeRemaining:`{{time}} verbleibend`,active:`Trocknung`,notSupported:`Trocknung nicht unterstützt`,powerRequired:`AMS-Netzteil anschließen, um Trocknung zu aktivieren`,startingDrying:`Trocknung wird gestartet...`,stoppingDrying:`Trocknung wird gestoppt...`,rotateTray:`Spule während der Trocknung drehen`},amsBackup:{titleOn:`AMS Filament Backup ist EIN. Zum Deaktivieren klicken.`,titleOff:`AMS Filament Backup ist AUS. Zum Aktivieren klicken.`,titleUnknown:`AMS-Filament-Backup-Status auf diesem Drucker nicht verfügbar.`,toastEnabled:`AMS Filament Backup aktiviert`,toastDisabled:`AMS Filament Backup deaktiviert`,modalTitle:`AMS Filament Backup`,modalHelp:`Wenn der aktive Slot leer wird, wechselt der Drucker in dieser Reihenfolge zu Slots mit demselben Preset und derselben Farbe.`,modalNoSlots:`Kein Filament geladen.`,modalNoPairs:`Keine Backup-Paare — keine zwei Slots teilen sich Filament-Preset und Farbe.`,extruderRightShort:`R`,extruderLeftShort:`L`,stateOn:`Aktiviert`,stateOff:`Deaktiviert`,stateUnknown:`Auf diesem Drucker nicht unterstützt`},activeJobSlot:{title:`Dieser Slot ist Filament {{n}} im aktiven Druck`,ariaLabel:`Aktiver Druck-Slot {{n}}`},filaments:`Filamente`,openCameraOverlay:`Kamera-Overlay öffnen`,openCameraWindow:`Kamera in neuem Fenster öffnen`,firmwareUpdateAvailable:`Firmware-Update verfügbar: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Aktuell`,firmwareUpdateButton:`Aktualisieren`,plateDetection:{noPermission:`Sie haben keine Berechtigung, Drucker zu aktualisieren`,enabledClick:`Plattenprüfung aktiviert - Klicken zum Deaktivieren`,disabledClick:`Plattenprüfung deaktiviert - Klicken zum Aktivieren`,manageCalibration:`Platten-Erkennungskalibrierung verwalten`,calibrationRequired:`Kalibrierung erforderlich`,calibrationInstructions:`Bitte stellen Sie sicher, dass die Druckplatte vollständig leer ist, und klicken Sie dann auf Kalibrieren.`,calibrationDescription:`Die Kalibrierung erfasst ein Referenzbild der leeren Platte. Zukünftige Prüfungen vergleichen mit dieser Referenz, um Objekte zu erkennen.`,calibrationTip:`Tipp: Sie können bis zu 5 Kalibrierungen für verschiedene Platten speichern. Das System verwendet automatisch die beste Übereinstimmung bei der Prüfung.`,plateEmpty:`Platte erscheint leer`,objectsDetected:`Objekte auf Platte erkannt`,confidence:`Konfidenz`,difference:`Differenz`,analysisPreview:`Analysevorschau:`,analysisLegend:`Grüner Rahmen = Erkennungsbereich, Rote Überlagerung = Unterschiede zur Kalibrierung`,savedReferences:`Gespeicherte Referenzen ({{count}}/{{max}})`,deleteReference:`Referenz löschen`,labelPlaceholder:`Bezeichnung...`,clickToEdit:`{{label}} - Zum Bearbeiten klicken`,clickToAddLabel:`Zum Hinzufügen einer Bezeichnung klicken`},speed:{title:`Druckgeschwindigkeit`,silent:`Leise (50%)`,standard:`Standard (100%)`,sport:`Sport (124%)`,ludicrous:`Ludicrous (166%)`},airduct:{title:`Luftkanal-Modus`,cooling:`Kühlen`,heating:`Heizen`},noSdCard:`Keine SD`,door:{open:`Offen`,closed:`Zu`},fans:{partCooling:`Bauteilkühlung`,auxiliary:`Hilfsventilator`,chamber:`Kammerventilator`},clickToViewHmsErrors:`Klicken, um HMS-Fehler anzuzeigen`,estimatedCompletion:`Geschätzte Fertigstellungszeit`,plateNumber:`Platte {{number}}`,slotOptions:`Slot-Optionen`,amsPopup:{friendlyName:`AMS-Name`,friendlyNamePlaceholder:`z. B. AMS-Anzeigename`,serialNumber:`Seriennummer`,firmwareVersion:`Firmware`,save:`Speichern`,clear:`Löschen`,noEditPermission:`Sie haben keine Berechtigung, AMS-Einheiten umzubenennen`},firmwareModal:{title:`Firmware-Update`,titleUpToDate:`Firmware-Info`,currentVersion:`Aktuell:`,latestVersion:`Neueste:`,releaseNotes:`Versionshinweise`,checkingPrereqs:`Prüfe Voraussetzungen...`,sdCardReady:`SD-Karte bereit. Klicken Sie unten, um die Firmware hochzuladen.`,uploadedSuccess:`Firmware auf SD-Karte hochgeladen!`,applyInstructions:`So wenden Sie das Update auf Ihrem Drucker an:`,step1:`Gehen Sie auf dem Touchscreen des Druckers zu Einstellungen`,step2:`Navigieren Sie zu Firmware`,step3:`Wählen Sie Update von SD-Karte`,step4:`Das Update dauert 10-20 Minuten`,done:`Fertig`,starting:`Starte...`,uploadFirmware:`Firmware hochladen`,uploadFailed:`Upload fehlgeschlagen: {{error}}`,uploadedToast:`Firmware hochgeladen! Starten Sie das Update vom Druckerbildschirm.`,availableVersions:`Verfügbare Versionen`,usable:`Installierbar`,unavailable:`Nicht verfügbar`,installed:`Installiert`,newerBadge:`neuer`,olderBadge:`älter`,currentBadge:`aktuell`},accessCodePlaceholder:`Leer lassen, um den aktuellen zu behalten`,roi:{title:`Erkennungsbereich (ROI)`,xStart:`X-Start`,yStart:`Y-Start`,width:`Breite`,height:`Höhe`,instruction:`Passen Sie den Erkennungsbereich an, um sich auf die Druckplatte zu konzentrieren. Der grüne Rahmen in der Vorschau zeigt den aktuellen Bereich.`},developerModeWarning:`Der Entwickler-LAN-Modus ist nicht aktiviert auf: {{names}}. Einige Funktionen funktionieren möglicherweise nicht.`,howToEnable:`Aktivieren`,incompatibleFile:`Diese Datei wurde für {{slicedFor}} geslicet, aber dieser Drucker ist ein {{printerModel}}`,dropNotPrintable:`Nur .gcode- und .gcode.3mf-Dateien können gedruckt werden`,dropToPrint:`Zum Drucken ablegen`,cannotPrint:`Drucker beschäftigt`},archives:{title:`Druckarchiv`,no3mfBanner:{title:`Einige kürzliche Drucke konnten nicht mit Vorschaubild archiviert werden`,body:`Der Slicer hat die .gcode.3mf-Datei nicht auf der SD-Karte des Druckers hinterlegt, daher konnte Bambuddy weder Vorschaubild noch Slicer-Metadaten abrufen. Üblicherweise liegt das daran, dass "Gesendete Dateien auf externem Speicher speichern" im Slicer (Geräte-Tab in Bambu Studio / OrcaSlicer) deaktiviert ist.`,docsLink:`Installationsschritt 4 anzeigen`,dismissLabel:`Hinweis schließen`},searchPlaceholder:`Archiv durchsuchen...`,filterByPrinter:`Nach Drucker filtern`,filterByStatus:`Nach Status filtern`,sortBy:`Sortieren nach`,sortNewest:`Neueste zuerst`,sortOldest:`Älteste zuerst`,sortName:`Name`,sortDuration:`Dauer`,sortLargest:`Größte zuerst`,sortSmallest:`Kleinste zuerst`,sortSize:`Größe`,noArchives:`Keine Archive gefunden`,noArchivesSearch:`Keine Archive entsprechen Ihrer Suche`,originalPrintNotVisible:`Ursprünglicher Druck nicht sichtbar - versuchen Sie, die Filter zu löschen`,noArchivesYet:`Noch keine Archive`,prints:`Drucke`,pagination:{showing:`Zeige`,to:`bis`,of:`von`,show:`Zeige`,page:`Seite`,all:`Alle`},loadingArchives:`Lade Archive...`,releaseToUpload:`Loslassen zum Hochladen`,showAll:`Alle anzeigen`,showFavoritesOnly:`Nur Favoriten anzeigen`,gridView:`Rasteransicht`,listView:`Listenansicht`,calendarView:`Kalenderansicht`,logView:`Druckprotokoll`,manageTags:`Tags verwalten`,showFailedPrints:`Fehlgeschlagene Drucke anzeigen`,hideFailedPrints:`Fehlgeschlagene Drucke ausblenden`,hideDuplicates:`Duplikate ausblenden`,viewOriginalPrint:`Klicken, um den ursprünglichen Druck anzuzeigen (#{{id}})`,printTime:`Druckzeit`,filamentUsed:`Verbrauchtes Filament`,cost:`Kosten`,reprint:`Drucken`,preview:`Vorschau`,deleteArchive:`Archiv löschen`,deleteConfirm:`Möchten Sie dieses Archiv wirklich löschen?`,favorite:`Favorit`,unfavorite:`Aus Favoriten entfernen`,viewDetails:`Details anzeigen`,status:{completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,stopped:`Gestoppt`},toast:{source3mfAttached:`Quell-3MF angehängt: {{filename}}`,failedUploadSource3mf:`Fehler beim Hochladen der Quell-3MF`,source3mfRemoved:`Quell-3MF entfernt`,failedRemoveSource3mf:`Fehler beim Entfernen der Quell-3MF`,f3dAttached:`F3D angehängt: {{filename}}`,failedUploadF3d:`Fehler beim Hochladen der F3D`,f3dRemoved:`F3D entfernt`,failedRemoveF3d:`Fehler beim Entfernen der F3D`,timelapseAttached:`Zeitraffer angehängt: {{filename}}`,timelapseAlreadyAttached:`Zeitraffer bereits angehängt`,noMatchingTimelapse:`Kein passender Zeitraffer gefunden`,failedScanTimelapse:`Fehler beim Suchen nach Zeitraffer`,failedAttachTimelapse:`Fehler beim Anhängen des Zeitraffers`,timelapseRemoved:`Zeitraffer entfernt`,failedRemoveTimelapse:`Fehler beim Entfernen des Zeitraffers`,timelapseUploaded:`Zeitraffer hochgeladen: {{filename}}`,failedUploadTimelapse:`Fehler beim Hochladen des Zeitraffers`,archiveDeleted:`Archiv gelöscht`,failedDeleteArchive:`Fehler beim Löschen des Archivs`,addedToFavorites:`Zu Favoriten hinzugefügt`,removedFromFavorites:`Aus Favoriten entfernt`,projectUpdated:`Projekt aktualisiert`,failedUpdateProject:`Fehler beim Aktualisieren des Projekts`,linkCopied:`Link in die Zwischenablage kopiert`,failedCopyLink:`Fehler beim Kopieren des Links`,photoDeleted:`Foto gelöscht`,failedDeletePhoto:`Fehler beim Löschen des Fotos`,failedDeleteArchives:`Fehler beim Löschen der Archive`,failedUpdateFavorites:`Fehler beim Aktualisieren der Favoriten`,exportDownloaded:`Export heruntergeladen`,exportFailed:`Export fehlgeschlagen`},menu:{print:`Drucken`,schedule:`Planen`,openInBambuStudio:`Im Slicer öffnen`,slice:`Slicen`,externalLink:`Externer Link`,viewOnMakerWorld:`Auf MakerWorld ansehen`,preview3d:`3D-Vorschau`,viewTimelapse:`Zeitraffer ansehen`,scanForTimelapse:`Nach Zeitraffer suchen`,uploadTimelapse:`Zeitraffer hochladen`,removeTimelapse:`Zeitraffer entfernen`,downloadSource3mf:`Quell-3MF herunterladen`,uploadSource3mf:`Quell-3MF hochladen`,replaceSource3mf:`Quell-3MF ersetzen`,removeSource3mf:`Quell-3MF entfernen`,uploadF3d:`F3D hochladen`,replaceF3d:`F3D ersetzen`,downloadF3d:`F3D herunterladen`,removeF3d:`F3D entfernen`,download:`Herunterladen`,copyDownloadLink:`Download-Link kopieren`,qrCode:`QR-Code`,viewPhotos:`Fotos ansehen`,viewPhotosCount:`Fotos ansehen ({{count}})`,projectPage:`Projektseite`,addToFavorites:`Zu Favoriten hinzufügen`,removeFromFavorites:`Aus Favoriten entfernen`,edit:`Bearbeiten`,printLog:`Druckprotokoll`,goToProject:`Zum Projekt: {{name}}`,addToProject:`Zu Projekt hinzufügen`,removeFromProject:`Aus Projekt entfernen`,loading:`Laden...`,noProjectsAvailable:`Keine Projekte verfügbar`,searchProjects:`Projekte suchen…`,select:`Auswählen`,deselect:`Abwählen`,delete:`Löschen`},permission:{noReprint:`Sie haben keine Berechtigung, dieses Archiv erneut zu drucken`,noAddToQueue:`Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen`,noUpdateArchives:`Sie haben keine Berechtigung, Archive zu aktualisieren`,noUploadFiles:`Sie haben keine Berechtigung, Dateien hochzuladen`,noDownload:`Sie haben keine Berechtigung, Archive herunterzuladen`,noCopyLink:`Sie haben keine Berechtigung, Download-Links zu kopieren`,noDelete:`Sie haben keine Berechtigung, dieses Archiv zu löschen`,noEdit:`Sie haben keine Berechtigung, diesen Eintrag zu bearbeiten`,noCreate:`Sie haben keine Berechtigung, Archive zu erstellen`},platePicker:{title:`Platte zur Vorschau auswählen`,hint:`Dieses Archiv enthält mehrere Platten. Wähle eine, um sie im GCode-Viewer zu öffnen.`,plateLabel:`Platte {{index}}`,objectCount:`{{count}} Objekt`,objectCount_plural:`{{count}} Objekte`,noGcode:`Dieses Archiv enthält keinen geschnittenen G-Code zur Vorschau. Öffne es zuerst in Bambu Studio zum Slicen.`},card:{previousPlate:`Vorherige Platte`,nextPlate:`Nächste Platte`,plateNumber:`Platte {{index}}`,moreOptions:`Rechtsklick für mehr Optionen`,addToFavorites:`Zu Favoriten hinzufügen`,removeFromFavorites:`Aus Favoriten entfernen`,cancelled:`abgebrochen`,failed:`fehlgeschlagen`,duplicate:`Duplikat`,duplicateTitle:`Dieses Modell wurde bereits zuvor gedruckt`,openSource3mf:`Quell-3MF in Bambu Studio öffnen (Rechtsklick für mehr Optionen)`,downloadF3d:`Fusion 360 Designdatei herunterladen`,viewTimelapse:`Zeitraffer ansehen`,viewPhoto:`1 Foto ansehen`,viewPhotos:`{{count}} Fotos ansehen`,openFolder:`Ordner öffnen: {{name}}`,slicedFile:`Geslicte Datei - druckbereit`,sourceFile:`Nur Quelldatei - keine AMS-Zuordnung verfügbar`,gcode:`GCODE`,source:`QUELLE`,project:`Projekt: {{name}}`,runsBadge:`{{count}} Drucke`,runsBadgeTitle:`Insgesamt {{count}} Drucke — {{successful}} erfolgreich, {{failed}} fehlgeschlagen. Klicken, um das vollständige Druckprotokoll zu öffnen.`,estimated:`Geschätzt: {{time}}`,actual:`Tatsächlich: {{time}}`,accuracy:`Genauigkeit: {{percent}}%`,filament:`{{weight}} g`,layer:`{{count}} Schicht`,layers:`{{count}} Schichten`,object:`{{count}} Objekt`,objects:`{{count}} Objekte`,slicedFor:`Geslict für {{model}}`,uploadedBy:`Hochgeladen von`,noPermissionReprint:`Sie haben keine Berechtigung, erneut zu drucken`,noFileForReprint:`Keine 3MF-Datei verfügbar — die Datei konnte beim Aufzeichnen des Drucks nicht vom Drucker heruntergeladen werden`,noPermissionEdit:`Sie haben keine Berechtigung, Archive zu bearbeiten`,noPermissionDelete:`Sie haben keine Berechtigung, Archive zu löschen`,reprint:`Drucken`,schedulePrint:`Druck planen`,schedule:`Planen`,openInBambuStudio:`Im Slicer öffnen`,openInBambuStudioToSlice:`Im Slicer öffnen zum Slicen`,slice:`Slicen`,externalLink:`Externer Link`,makerWorld:`MakerWorld – {{designer}}`,viewProject:`Projekt ansehen`,noExternalLink:`Kein externer Link`,preview3d:`3D-Vorschau`,download:`Herunterladen`,edit:`Bearbeiten`,delete:`Löschen`},runLog:{title:`Druckprotokoll`,modalTitle:`Druckprotokoll — {{name}}`,modalTitleFallback:`dieses Archiv`,empty:`Für dieses Archiv wurden noch keine Druckereignisse aufgezeichnet.`,col:{date:`Datum`,status:`Status`,duration:`Dauer`,filament:`Filament`,cost:`Kosten`},status:{completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,cancelled:`Abgebrochen`,stopped:`Gestoppt`,skipped:`Übersprungen`,printing:`Druckt`}},modal:{deleteArchive:`Archiv löschen`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.`,deleteButton:`Löschen`,deletePurgeStats:`Diesen Druck auch aus den Quick Stats entfernen (Filament, Zeit, Kosten, Energie)`,deleteQueueItemsWarning:`{{count}} mit diesem Archiv verknüpfte Warteschlangeneinträge werden ebenfalls entfernt.`,deleteBlockedByPrinting:`Löschen nicht möglich — {{count}} Warteschlangeneinträge werden derzeit gedruckt. Druck zuerst stoppen und erneut versuchen.`,removeSource3mf:`Quell-3MF entfernen`,removeSource3mfConfirm:`Möchten Sie die Quell-3MF-Datei wirklich von "{{name}}" entfernen? Die ursprüngliche Slicer-Projektdatei wird gelöscht.`,removeButton:`Entfernen`,removeF3d:`F3D entfernen`,removeF3dConfirm:`Möchten Sie die Fusion 360 Designdatei wirklich von "{{name}}" entfernen?`,removeTimelapse:`Zeitraffer entfernen`,removeTimelapseConfirm:`Möchten Sie das Zeitraffervideo wirklich von "{{name}}" entfernen?`,timelapse:`{{name}} - Zeitraffer`,selectTimelapse:`Zeitraffer auswählen`,selectTimelapseDesc:`Keine automatische Übereinstimmung gefunden. Wählen Sie den Zeitraffer für diesen Druck:`,deleteArchives:`Archive löschen`,deleteArchivesConfirm:`Möchten Sie wirklich {{count}} Archiv(e) löschen? Diese Aktion kann nicht rückgängig gemacht werden.`,deleteCount:`{{count}} löschen`},page:{title:`Archive`,printsCount:`{{filtered}} von {{total}} Drucken`,dropFilesHere:`.3mf-Dateien hier ablegen`,releaseToUpload:`Loslassen zum Hochladen`,only3mfSupported:`Nur .3mf-Dateien werden unterstützt`,close:`Schließen`,selected:`{{count}} ausgewählt`,selectAll:`Alle auswählen`,tags:`Tags`,project:`Projekt`,favorite:`Favorit`,delete:`Löschen`,toggledFavorites:`Favoriten für {{count}} Archiv(e) umgeschaltet`,failedUpdateFavorites:`Fehler beim Aktualisieren der Favoriten`,archivesDeleted:`{{count}} Archiv(e) gelöscht`,failedDeleteArchives:`Fehler beim Löschen der Archive`,photoDeleted:`Foto gelöscht`,failedDeletePhoto:`Fehler beim Löschen des Fotos`},list:{name:`Name`,printer:`Drucker`,date:`Datum`,size:`Größe`,actions:`Aktionen`,hasTimelapse:`Hat Zeitraffer`},log:{date:`Datum`,printName:`Druckname`,printer:`Drucker`,user:`Benutzer`,status:`Status`,duration:`Dauer`,filament:`Filament`,allPrinters:`Alle Drucker`,allUsers:`Alle Benutzer`,allStatuses:`Alle Status`,cancelled:`Abgebrochen`,skipped:`Übersprungen`,dateFrom:`Von`,dateTo:`Bis`,noEntries:`Keine Druckprotokolleinträge gefunden`,showing:`{{count}} von {{total}} Einträgen`,rowsPerPage:`Zeilen`,page:`Seite`,prev:`Zurück`,next:`Weiter`,clearLog:`Protokoll löschen`,clearLogTitle:`Druckprotokoll löschen`,clearLogConfirm:`Alle Druckprotokolleinträge werden dauerhaft gelöscht. Archive und Warteschlangeneinträge sind nicht betroffen. Diese Aktion kann nicht rückgängig gemacht werden. Sind Sie sicher?`,clearLogButton:`Alle löschen`,cleared:`{{count}} Protokolleinträge gelöscht`,clearFailed:`Druckprotokoll konnte nicht gelöscht werden`,deleteEntryTitle:`Druckprotokoll-Eintrag löschen`,deleteEntryConfirm:`Dieser Eintrag wird aus dem Protokoll entfernt und sein Filament-, Zeit- und Kostenbeitrag verschwindet aus den Schnellstatistiken. Das zugehörige Archiv (falls vorhanden) ist nicht betroffen. Diese Aktion kann nicht rückgängig gemacht werden.`,entryDeleted:`Druckprotokoll-Eintrag gelöscht`,entryDeleteFailed:`Druckprotokoll-Eintrag konnte nicht gelöscht werden`,editEntryTitle:`Druckprotokoll-Eintrag bearbeiten`,editEntryDescription:`Diesen Druckdurchlauf klassifizieren. Das Fehleranalyse-Widget gruppiert nach diesen Werten, sodass Aktualisierungen sofort in die Statistik einfließen.`,entryUpdated:`Druckprotokoll-Eintrag aktualisiert`,entryUpdateFailed:`Druckprotokoll-Eintrag konnte nicht aktualisiert werden`,statuses:{completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,stopped:`Gestoppt`,cancelled:`Abgebrochen`,skipped:`Übersprungen`}}},queue:{filamentShort:{rowBadge:`Filament fuer die zugewiesene Spule reicht nicht`,rowTooltip:`Der Dispatcher hat diese Position markiert. Klicke auf Play, um den Pro-Slot-Fehlbestand zu sehen und zu entscheiden, ob trotzdem gedruckt werden soll.`,confirmTitle:`Filament reicht nicht`,confirmIntro:`Die zugewiesene Spule kann mindestens einen Slot nicht versorgen. Trotzdem drucken?`,lineItem:`Slot {{slot}}: benoetigt {{required}} g, {{remaining}} g verbleibend`,unknown:`unbekannt`,printAnyway:`Trotzdem drucken`},title:`Druckwarteschlange`,subtitle:`Planen und verwalten Sie Ihre Druckaufträge`,addToQueue:`Zur Warteschlange hinzufügen`,print:`Drucken`,reprint:`Erneut drucken`,schedulePrint:`Druck planen`,editQueueItem:`Warteschlangeneintrag bearbeiten`,printToPrinters:`Auf {{count}} Druckern drucken`,queueToPrinters:`Zu {{count}} Druckern hinzufügen`,queueSelectedPlates:`{{count}} Platten in die Warteschlange`,selectAllPlates:`Alle {{count}} Platten auswählen`,deselectAll:`Alle abwählen`,printQueued:`Druck in Warteschlange`,itemsQueued:`{{count}} Einträge in Warteschlange`,sending:`Wird gesendet...`,sendingProgress:`Sende {{current}}/{{total}}...`,adding:`Wird hinzugefügt...`,addingProgress:`Füge hinzu {{current}}/{{total}}...`,savingProgress:`Speichere {{current}}/{{total}}...`,clearQueue:`Warteschlange leeren`,clearHistory:`Verlauf löschen`,emptyQueue:`Warteschlange ist leer`,position:`Position`,scheduledTime:`Geplante Zeit`,moveUp:`Nach oben`,moveDown:`Nach unten`,startNow:`Jetzt starten`,printingInProgress:`Druck läuft...`,viewArchive:`Archiv anzeigen`,viewInFileManager:`Im Dateimanager anzeigen`,itemCount:`{{count}} Element`,itemCount_plural:`{{count}} Elemente`,dragToReorder:`Ziehen zum Neuordnen (nur Sofort)`,reorderHint:`Position betrifft nur Sofort-Elemente. Geplante Elemente werden zur festgelegten Zeit ausgeführt.`,sjf:{label:`SJF`,tooltip:`Kürzester Auftrag zuerst — Scheduler bevorzugt kürzere Drucke`},addedBy:`Hinzugefügt von {{name}}`,nextInQueue:`Nächster in der Warteschlange`,clearPlateSuccess:`Druckplatte freigegeben — bereit für nächsten Druck`,plateNumber:`Platte {{index}}`,quantity:`Menge`,quantityHint:`Erstellt {{count}} Warteschlangeneinträge`,activeBatches:`Aktive Stapel`,batchProgress:`{{completed}} von {{total}} abgeschlossen`,cancelBatch:`Verbleibende abbrechen`,batchCancelled:`Verbleibende Stapeleinträge abgebrochen`,cancelBatchConfirmTitle:`Stapel abbrechen`,cancelBatchConfirmMessage:`Alle verbleibenden ausstehenden Einträge in diesem Stapel abbrechen?`,batch:{defaultName:`Stapel`,label:`{{count}} Eintrag`,label_plural:`{{count}} Einträge`,pendingCount:`{{count}} ausstehend`,pendingCount_plural:`{{count}} ausstehend`,expand:`Stapel ausklappen`,collapse:`Stapel einklappen`,groupAsBatch:`Als Stapel gruppieren…`,groupAsBatchDescription:`Fasse die {{count}} ausgewählten Einträge zu einem einklappbaren Stapel zusammen.`,nameLabel:`Stapelname`,namePlaceholder:`z. B. Freitagsgeschenke`,create:`Stapel erstellen`,ungroup:`Gruppierung aufheben`,ungroupConfirmTitle:`Stapel auflösen?`,ungroupConfirmMessage:`Die Einträge bleiben in der Warteschlange, sind aber nicht mehr gruppiert.`,dragGroup:`Gruppe ziehen`},tabs:{queue:`Warteschlange`,history:`Verlauf`,timeline:`Zeitachse`},layout:{flatList:`Liste`,byPrinter:`Nach Drucker`,groupByPrinter:`Nach Drucker gruppieren`},history:{emptyTitle:`Noch kein Verlauf`,emptyDescription:`Abgeschlossene, abgebrochene und fehlgeschlagene Drucke erscheinen hier.`},dragGhost:{multiCount:`{{count}} Einträge`,batch:`{{name}} ({{count}} Kopie)`,batch_plural:`{{name}} ({{count}} Kopien)`},sections:{currentlyPrinting:`Aktuell druckend`,queued:`In Warteschlange`,history:`Verlauf`},status:{pending:`Ausstehend`,waiting:`Wartend`,printing:`Druckt`,paused:`Pausiert`,completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,skipped:`Übersprungen`,cancelled:`Abgebrochen`},summary:{printing:`Druckt`,queued:`In Warteschlange`,totalTime:`Gesamte Wartezeit`,totalWeight:`Gesamtgewicht der Warteschlange`,history:`Verlauf`},filter:{allPrinters:`Alle Drucker`,unassigned:`Nicht zugewiesen`,allStatus:`Alle Status`,allLocations:`Alle Standorte`,any:`Beliebig`},sort:{byPosition:`Nach Position sortieren`,byName:`Nach Name sortieren`,byPrinter:`Nach Drucker sortieren`,bySchedule:`Nach Zeitplan sortieren`,byDate:`Nach Datum sortieren`,ascendingOldest:`Aufsteigend (älteste zuerst)`,descendingNewest:`Absteigend (neueste zuerst)`},badges:{staged:`Bereitgestellt`,requiresPrevious:`Erfordert vorherigen Erfolg`,autoPowerOff:`Automatisch ausschalten`,gcodeInjection:`G-Code`},empty:{title:`Keine Drucke geplant`,description:`Planen Sie einen Druck von der Archivseite über die Option "Planen" im Kontextmenü oder ziehen Sie Dateien hierher.`},time:{asap:`Sofort`,overdue:`Überfällig`,now:`Jetzt`,lessThanMinute:`In weniger als einer Minute`,inMinutes:`In {{count}} Min`,inHours:`In {{count}} Stunden`},actions:{stopPrint:`Druck stoppen`,startPrint:`Druck starten`,requeue:`Erneut einreihen`},bulkEdit:{title:`{{count}} Element bearbeiten`,title_plural:`{{count}} Elemente bearbeiten`,description:`Nur geänderte Einstellungen werden auf ausgewählte Elemente angewendet.`,printer:`Drucker`,noChange:`— Keine Änderung —`,queueOptions:`Warteschlangenoptionen`,staged:`Bereitgestellt (manueller Start)`,autoPowerOff:`Nach Druck automatisch ausschalten`,requirePrevious:`Vorherigen Erfolg erfordern`,printOptions:`Druckoptionen`,bedLevelling:`Bett-Nivellierung`,flowCalibration:`Fluss-Kalibrierung`,vibrationCalibration:`Vibrations-Kalibrierung`,layerInspection:`Erste-Schicht-Prüfung`,timelapse:`Zeitraffer`,useAms:`AMS verwenden`,nozzleOffsetCali:`Düsenversatz-Kalibrierung`,applyChanges:`Änderungen übernehmen`,selectAll:`Alle auswählen`,deselectAll:`Auswahl aufheben`,selected:`{{count}} ausgewählt`,editSelected:`Ausgewählte bearbeiten`,cancelSelected:`Ausgewählte abbrechen`},confirm:{cancelTitle:`Geplanten Druck abbrechen`,cancelMessage:`Möchten Sie "{{name}}" wirklich abbrechen?`,stopTitle:`Druck stoppen`,stopMessage:`Möchten Sie den aktuellen Druck "{{name}}" wirklich stoppen? Der Druckauftrag wird am Drucker abgebrochen.`,removeTitle:`Aus Verlauf entfernen`,removeMessage:`Möchten Sie "{{name}}" wirklich aus dem Warteschlangenverlauf entfernen?`,clearHistoryTitle:`Verlauf löschen`,clearHistoryMessage:`Möchten Sie alle {{count}} Element(e) aus dem Verlauf entfernen?`,cancelButton:`Druck abbrechen`,stopButton:`Druck stoppen`,thisPrint:`diesen Druck`,thisItem:`dieses Element`},toast:{cancelled:`Warteschlangenelement abgebrochen`,cancelFailed:`Element konnte nicht abgebrochen werden`,removed:`Warteschlangenelement entfernt`,removeFailed:`Element konnte nicht entfernt werden`,stopped:`Druck gestoppt`,stopFailed:`Druck konnte nicht gestoppt werden`,released:`Druck in Warteschlange freigegeben`,startFailed:`Druck konnte nicht gestartet werden`,reorderFailed:`Warteschlange konnte nicht neu geordnet werden`,historyCleared:`{{count}} Verlaufselement(e) gelöscht`,clearHistoryFailed:`Verlauf konnte nicht gelöscht werden`,updateFailed:`Elemente konnten nicht aktualisiert werden`,bulkCancelled:`{{count}} Element(e) abgebrochen`,bulkCancelFailed:`Elemente konnten nicht abgebrochen werden`,batchCreated:`Stapel „{{name}}“ erstellt`,batchCreateFailed:`Stapel konnte nicht erstellt werden`,batchUngrouped:`{{count}} Eintrag/Einträge aus Stapel gelöst`,batchUngroupFailed:`Stapel konnte nicht aufgelöst werden`},timeline:{listView:`Liste`,timelineView:`Zeitstrahl`,unassigned:`Nicht zugewiesen`,noData:`Keine geplanten Drucke für diesen Tag`,nothingCommitted:`Keine festgelegten Pläne in diesem Zeitfenster. Vorgemerkte Einträge, wartende Einträge und ASAP-Aufträge auf inaktiven Druckern werden nicht angezeigt — leg eine geplante Zeit fest oder gib einen vorgemerkten Eintrag frei, damit er hier erscheint.`,allDoneBy:`Alle Drucke voraussichtlich fertig um {{time}}`,staged:`Bereitgestellt`,filterAll:`Alle anzeigen`,filterPrinting:`Druckend`,filterQueued:`Warteschlange`,time:{anyMoment:`jeden Moment`,minutesLeft:`{{minutes}}m übrig`,hoursLeft:`{{hours}}h übrig`,hoursMinutesLeft:`{{hours}}h {{minutes}}m übrig`},day:{previous:`Vorheriger Tag`,next:`Nächster Tag`,today:`Heute`},window:{back12h:`12 Stunden zurück`,forward12h:`12 Stunden vor`,now:`Jetzt`},printerColumnHeader:`Drucker`},permissions:{noStopPrint:`Sie haben keine Berechtigung, Drucke zu stoppen`,noStartPrint:`Sie haben keine Berechtigung, Drucke zu starten`,noEdit:`Sie haben keine Berechtigung, dieses Warteschlangenelement zu bearbeiten`,noCancel:`Sie haben keine Berechtigung, dieses Warteschlangenelement abzubrechen`,noRequeue:`Sie haben keine Berechtigung, Elemente erneut einzureihen`,noRemove:`Sie haben keine Berechtigung, dieses Warteschlangenelement zu entfernen`,noClearHistory:`Sie haben keine Berechtigung, den gesamten Verlauf zu löschen`,noEditItems:`Sie haben keine Berechtigung, Warteschlangenelemente zu bearbeiten`,noCancelItems:`Sie haben keine Berechtigung, Warteschlangenelemente abzubrechen`}},backgroundDispatch:{unknownFile:`Unbekannte Datei`,unknownPrinter:`Unbekannter Drucker`,startingPrints:`Starte Drucke`,progressSummary:`{{complete}}/{{total}} abgeschlossen • Geplant: {{dispatched}} • In Bearbeitung: {{processing}}`,expandDetails:`Dispatch-Details ausklappen`,collapseDetails:`Dispatch-Details einklappen`,dismissToast:`Dispatch-Hinweis schließen`,cancelDispatchJob:`Dispatch-Job abbrechen`,cancel:`Abbrechen`,cancelling:`Wird abgebrochen…`,awaitingPrinter:`Warte auf Drucker…`,status:{dispatched:`Geplant`,processing:`In Bearbeitung`,completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,cancelled:`Abgebrochen`},toast:{cancellingUpload:`Upload wird abgebrochen...`,cancelled:`Dispatch abgebrochen`,cancelFailed:`Dispatch konnte nicht abgebrochen werden`,completeWithFailures:`Background Dispatch abgeschlossen: {{completed}} erfolgreich, {{failed}} fehlgeschlagen`,completeSuccess:`Background Dispatch abgeschlossen: {{completed}} erfolgreich`,printStartedRemaining:`{{completed}} Druck(e) gestartet, {{remaining}} weitere werden gesendet...`}},stats:{title:`Statistiken`,subtitle:`Widgets zum Neuanordnen ziehen. Auf das Augensymbol klicken zum Ausblenden.`,overview:`Übersicht`,totalPrints:`Gesamtdrucke`,successRate:`Erfolgsrate`,totalPrintTime:`Gesamtdruckzeit`,printTime:`Druckzeit`,totalFilament:`Gesamtverbrauch Filament`,filamentUsed:`Filamentverbrauch`,filamentCost:`Filamentkosten`,totalCost:`Gesamtkosten`,energyUsed:`Energieverbrauch`,energyCost:`Energiekosten`,energyWarmingUpTooltip:`Die Energieerfassung sammelt noch stündliche Snapshots. Zeitraumwerte werden genau, sobald vor dem gewählten Bereich mindestens ein Snapshot vorliegt. Frühe Werte können zu niedrig sein.`,averagePrintTime:`Durchschnittliche Druckzeit`,printsPerDay:`Drucke pro Tag`,byPrinter:`Nach Drucker`,printsByPrinter:`Drucke nach Drucker`,byMaterial:`Nach Material`,byMonth:`Nach Monat`,last7Days:`Letzte 7 Tage`,last30Days:`Letzte 30 Tage`,last90Days:`Letzte 90 Tage`,allTime:`Gesamt`,quickStats:`Schnellstatistiken`,printActivity:`Druckaktivität`,filamentTypes:`Filamenttypen`,filamentTrends:`Filamenttrends`,failureAnalysis:`Fehleranalyse`,timeAccuracy:`Zeitgenauigkeit`,successful:`Erfolgreich:`,failed:`Fehlgeschlagen:`,cancelled:`Abgebrochen:`,perfectEstimate:`100% = perfekte Schätzung`,noTimeAccuracyData:`Noch keine Zeitgenauigkeitsdaten`,noFilamentData:`Keine Filamentdaten verfügbar`,noPrinterData:`Keine Druckerdaten verfügbar`,noPrintData:`Keine Druckdaten verfügbar`,noPrintDataLast30Days:`Keine Druckdaten in den letzten 30 Tagen`,failureReasons:`Fehlerursachen`,topFailureReasons:`Häufigste Fehlerursachen`,failedPrintsCount:`{{failed}} / {{total}} Drucke fehlgeschlagen`,lastWeekRate:`Letzte Woche: {{rate}}%`,resetLayout:`Layout zurücksetzen`,recalculateCosts:`Kosten neu berechnen`,recalculateCostsHint:`Alle Archivkosten mit aktuellen Filamentpreisen neu berechnen`,exportStats:`Statistiken exportieren`,exportAsCsv:`Als CSV exportieren`,exportAsExcel:`Als Excel exportieren`,hiddenCount:`{{count}} ausgeblendet`,exportDownloaded:`Export heruntergeladen`,exportFailed:`Export fehlgeschlagen`,layoutReset:`Layout zurückgesetzt`,recalculatedCosts:`Kosten für {{count}} Archive neu berechnet`,recalculateFailed:`Kosten konnten nicht neu berechnet werden`,loadingStats:`Statistiken werden geladen...`,noPermissionResetLayout:`Sie haben keine Berechtigung, das Layout zurückzusetzen`,noPermissionRecalculate:`Sie haben keine Berechtigung, Kosten neu zu berechnen`,noPrintDataInRange:`Keine Druckdaten im ausgewählten Zeitraum`,periodFilament:`Filamentverbrauch`,periodCost:`Kosten`,avgPerPrint:`Durchschnitt pro Druck`,usageOverTime:`Verbrauch im Zeitverlauf`,filamentByWeight:`Gewicht`,printDuration:`Druckdauer`,printerUtilization:`Druckerauslastung`,filamentSuccess:`Erfolg nach Material`,printHabits:`Druckgewohnheiten`,printTimeOfDay:`Druck-Tageszeit`,colorDistribution:`Farbverteilung`,noColorData:`Keine Farbdaten verfügbar`,records:`Rekorde`,longestPrint:`Längster Druck`,heaviestPrint:`Schwerster Druck`,mostExpensivePrint:`Teuerster Druck`,busiestDay:`Aktivster Tag`,successStreak:`Erfolgsserie`,streakPrint:`aufeinanderfolgender Druck`,streakPrints:`{{count}} aufeinanderfolgende Drucke`,printerStats:`Druckerstatistiken`,hours:`Stunden`,avgPrints:`Ø Drucke`,noArchiveData:`Keine Druckdaten verfügbar`,filamentByTime:`Zeitverlauf`,avgWeight:`Ø Gewicht`,avgTime:`Ø Zeit`,filamentByPrints:`Drucke`,timeframe:{today:`Heute`,"this-week":`Diese Woche`,"this-month":`Dieser Monat`,"last-7":`Letzte 7 Tage`,"last-30":`Letzte 30 Tage`,"last-90":`Letzte 90 Tage`,"this-year":`Dieses Jahr`,"all-time":`Gesamt`,custom:`Benutzerdefiniert`,from:`Von`,to:`Bis`},allUsers:`Alle Benutzer`,noUser:`Kein Benutzer (System)`,filterByUser:`Nach Benutzer filtern`},maintenance:{title:`Wartung`,overview:`Übersicht`,allOk:`Alle Wartungen aktuell`,dueCount:`{{count}} Aufgabe fällig`,dueCount_plural:`{{count}} Aufgaben fällig`,warningCount:`{{count}} Warnung`,warningCount_plural:`{{count}} Warnungen`,totalPrintTime:`Gesamtdruckzeit`,nextMaintenance:`Nächste Wartung`,nothingDue:`Nichts fällig`,tasks:`Aufgaben`,lastPerformed:`Zuletzt durchgeführt`,interval:`Intervall`,hoursRemaining:`{{hours}}h verbleibend`,hoursOverdue:`{{hours}}h überfällig`,markDone:`Als erledigt markieren`,performMaintenance:`Wartung durchführen`,history:`Verlauf`,noHistory:`Kein Wartungsverlauf`,editPrintHours:`Druckstunden bearbeiten`,currentHours:`Aktuelle Stunden`,statusTab:`Status`,settingsTab:`Einstellungen`,overdueCount:`{{count}} überfällig`,dueSoonCount:`{{count}} bald fällig`,dueSoon:`Bald fällig`,allGood:`Alles in Ordnung`,overdueBy:`Überfällig um {{duration}}`,dueIn:`Fällig in {{duration}}`,timeLeft:`{{duration}} verbleibend`,day:`1 Tag`,days:`{{count}} Tage`,week:`1 Woche`,weeks:`{{count}} Wochen`,month:`1 Monat`,months:`{{count}} Monate`,year:`1 Jahr`,maintenanceTypes:`Wartungstypen`,maintenanceTypesDescription:`Systemtypen und Ihre benutzerdefinierten Wartungsaufgaben`,addCustomType:`Benutzerdefinierten Typ hinzufügen`,restoreDefaults:`Standardaufgaben wiederherstellen`,intervalType:`Intervalltyp`,intervalValue:`Intervall ({{type}})`,icon:`Symbol`,documentationLink:`Dokumentationslink (optional)`,assignToPrinters:`Druckern zuweisen`,selectAtLeastOnePrinter:`Wählen Sie mindestens einen Drucker`,addType:`Typ hinzufügen`,custom:`Benutzerdefiniert`,printHours:`Druckstunden`,calendarDays:`Kalendertage`,exampleName:`z.B. HEPA-Filter ersetzen`,viewDocumentation:`Dokumentation anzeigen`,timeBasedInterval:`Zeitbasiertes Intervall`,intervalOverrides:`Intervall-Überschreibungen`,intervalOverridesDescription:`Intervalle für bestimmte Drucker anpassen`,assignedToPrinters:`Druckern zugewiesen:`,noPrintersAssigned:`Keine Drucker zugewiesen`,addPrinterShort:`Hinzufügen:`,printersAssignedClick:`{{count}} Drucker zugewiesen - klicken zum Verwalten`,removeFromPrinter:`Von diesem Drucker entfernen`,types:{lubricateCarbonRods:`Karbonstäbe schmieren`,lubricateRails:`Linearschienen schmieren`,cleanNozzle:`Düse/Hotend reinigen`,checkBelts:`Riemenspannung prüfen`,cleanBuildPlate:`Druckbett reinigen`,checkExtruder:`Extruderzahnräder prüfen`,checkCooling:`Kühlungslüfter prüfen`,generalInspection:`Allgemeine Inspektion`,cleanCarbonRods:`Kohlenstoffstangen reinigen`,lubricateSteelRods:`Stahlstangen schmieren`,cleanSteelRods:`Stahlstangen reinigen`,cleanLinearRails:`Linearschienen reinigen`,checkPtfeTube:`PTFE-Schlauch prüfen`,replaceHepaFilter:`HEPA-Filter ersetzen`,replaceCarbonFilter:`Aktivkohlefilter ersetzen`,lubricateLeftNozzleRail:`Linke Düsenschiene schmieren`},maintenanceComplete:`Wartung als abgeschlossen markiert`,typeUpdated:`Wartungstyp aktualisiert`,typeDeleted:`Wartungstyp gelöscht`,defaultsRestored:`{{count}} Standardaufgabe(n) wiederhergestellt`,printHoursUpdated:`Druckstunden aktualisiert`,printerAssigned:`Drucker zugewiesen`,printerRemoved:`Drucker entfernt`,deleteTypeConfirm:`"{{name}}" löschen?`,deleteSystemTypeTitle:`Standard-Wartungsaufgabe löschen?`,deleteSystemTypeMessage:`Möchten Sie die Standard-Wartungsaufgabe "{{name}}" wirklich löschen?`,noPermissionUpdate:`Sie haben keine Berechtigung, Wartungselemente zu aktualisieren`,noPermissionPerform:`Sie haben keine Berechtigung, Wartungen durchzuführen`,noPermissionEditTypes:`Sie haben keine Berechtigung, Wartungstypen zu bearbeiten`,noPermissionDeleteTypes:`Sie haben keine Berechtigung, Wartungstypen zu löschen`,noPermissionEditHours:`Sie haben keine Berechtigung, Druckstunden zu bearbeiten`,noPermissionRemovePrinter:`Sie haben keine Berechtigung, Druckerzuweisungen zu entfernen`,noPermissionAssignPrinter:`Sie haben keine Berechtigung, Drucker zuzuweisen`,noPermissionEditIntervals:`Sie haben keine Berechtigung, Intervalle zu bearbeiten`,configureSettings:`Wartungstypen und Intervalle konfigurieren`},settings:{title:`Einstellungen`,general:`Allgemein`,tabs:{general:`Allgemein`,smartPlugs:`Smart Plugs`,notifications:`Benachrichtigungen`,queue:`Workflow`,filament:`Filament`,network:`Netzwerk`,apiKeys:`API-Schlüssel`,virtualPrinter:`Virtueller Drucker`,spoolbuddy:`SpoolBuddy`,failureDetection:`Fehlererkennung`,users:`Authentifizierung`,backup:`Sicherung`,emailAuth:`E-Mail-Authentifizierung`,ldap:`LDAP`,twoFa:`Zwei-Faktor-Auth`,oidc:`SSO / OIDC`,security:`Sicherheit`},spoolbuddy:{infoTitle:`SpoolBuddy-Geräte`,infoBody:`SpoolBuddy-Kioske registrieren sich automatisch per Heartbeat. Ein Gerät hier abmelden, wenn es nicht mehr verwendet wird oder wenn ein veralteter Eintrag nach einem Daemon-Absturz übrig geblieben ist.`,duplicatesTitle:`{{count}} Geräte registriert`,duplicatesBody:`Die Kiosk-Oberfläche verwendet nur das zuerst registrierte Gerät. Falls eines davon ein veralteter Doppeleintrag nach einem Absturz ist, kann es hier entfernt werden — ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.`,empty:`Noch keine SpoolBuddy-Geräte registriert.`,online:`Online`,offline:`Offline`,unregister:`Abmelden`,unregisterSuccess:`Gerät abgemeldet`,unregisterError:`Gerät konnte nicht abgemeldet werden`,confirmTitle:`SpoolBuddy-Gerät abmelden?`,confirmBody:`Dies entfernt „{{hostname}}" ({{deviceId}}) aus der Datenbank. Ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.`,ipAddress:`IP-Adresse`,firmware:`Firmware`,lastSeen:`Zuletzt gesehen`,daemonUptime:`Daemon-Laufzeit`,systemUptime:`System-Laufzeit`,never:`nie`,nfc:`NFC`,scale:`Waage`,cpuTemp:`CPU-Temp.`,cpuLoad:`CPU-Last`,memory:`Speicher`,disk:`Festplatte`,update:`Aktualisieren`,updateConfirmTitle:`Spoolbuddy-Daemon aktualisieren?`,updateConfirmBody:`Software-Update auf „{{hostname}}" auslösen? Der Daemon startet nach dem Update neu.`,restartBrowser:`Browser neu starten`,restartBrowserConfirmTitle:`Kiosk-Browser neu starten?`,restartBrowserConfirmBody:`Kiosk-Browser auf „{{hostname}}" neu starten? Die Anzeige wird kurz schwarz.`,restartDaemon:`Daemon neu starten`,restartDaemonConfirmTitle:`Spoolbuddy-Daemon neu starten?`,restartDaemonConfirmBody:`Spoolbuddy-Daemon auf „{{hostname}}" neu starten? Das Gerät ist für einige Sekunden offline.`,reboot:`Neustart`,rebootConfirmTitle:`Gerät neu starten?`,rebootConfirmBody:`„{{hostname}}" neu starten? Das Gerät ist für etwa eine Minute offline.`,shutdown:`Herunterfahren`,shutdownConfirmTitle:`Gerät herunterfahren?`,shutdownConfirmBody:`„{{hostname}}" herunterfahren? Physischer Zugriff ist nötig, um es wieder einzuschalten.`,commandConfirm:`Bestätigen`,commandQueued:`Befehl eingereiht`,commandError:`Befehl konnte nicht gesendet werden`},ldap:{title:`LDAP-Authentifizierung`,enabledDesc:`LDAP-Authentifizierung ist aktiviert`,disabledDesc:`LDAP-Authentifizierung ist deaktiviert`,disabledHint:`LDAP-Einstellungen unten konfigurieren und speichern, dann aktivieren.`,enabled:`LDAP-Authentifizierung aktiviert`,disabled:`LDAP-Authentifizierung deaktiviert`,feature1:`Benutzer können sich mit LDAP-Anmeldedaten anmelden`,feature2:`Lokales Admin-Konto bleibt als Fallback erhalten`,feature3:`LDAP-Gruppen werden bei der Anmeldung BamBuddy-Gruppen zugeordnet`,serverConfig:`LDAP-Server-Konfiguration`,serverUrl:`Server-URL`,serverUrlHint:`Verwenden Sie ldap:// für Standard oder ldaps:// für SSL-Verbindungen`,security:`Sicherheit`,securityHint:`StartTLS aktualisiert eine einfache Verbindung auf TLS. LDAPS verwendet TLS von Anfang an.`,bindDn:`Bind-DN (Dienstkonto)`,bindPassword:`Bind-Passwort`,searchBase:`Such-Basis-DN`,userFilter:`Benutzer-Suchfilter`,userFilterHint:`{username} wird durch den Anmeldenamen ersetzt. Verwenden Sie (uid={username}) für OpenLDAP.`,advanced:`Erweitert`,autoProvision:`Benutzer automatisch anlegen`,autoProvisionHint:`Automatisch ein BamBuddy-Konto bei der ersten LDAP-Anmeldung erstellen`,defaultGroup:`Standardgruppe`,defaultGroupNone:`— Keine (kein Fallback) —`,defaultGroupHint:`Fallback-Gruppe, die zugewiesen wird, wenn sich ein LDAP-Benutzer authentifiziert, aber in keiner zugeordneten LDAP-Gruppe enthalten ist. Leer lassen, um nicht zugeordnete Benutzer ohne Berechtigungen zu belassen.`,groupMapping:`Gruppenzuordnung (JSON)`,groupMappingHint:`LDAP-Gruppen-DNs BamBuddy-Gruppen zuordnen. Verfügbare Gruppen: `,testConnection:`Verbindung testen`,settingsSaved:`LDAP-Einstellungen gespeichert`,errors:{serverRequired:`LDAP-Server-URL ist erforderlich`,searchBaseRequired:`Such-Basis-DN ist erforderlich`,enableAuthFirst:`Authentifizierung zuerst aktivieren`,configureLdapFirst:`LDAP-Einstellungen zuerst speichern`}},email:{smtpSettings:`SMTP-Konfiguration`,smtpHost:`SMTP-Server`,smtpPort:`SMTP-Port`,security:`Sicherheit`,authentication:`Authentifizierung`,username:`Benutzername`,password:`Passwort`,fromEmail:`Absender-E-Mail`,fromName:`Absendername`,testConnection:`SMTP-Verbindung testen`,testRecipient:`Test-Empfänger-E-Mail`,sendTest:`Test-E-Mail senden`,sending:`Wird gesendet...`,save:`Einstellungen speichern`,saving:`Wird gespeichert...`,advancedAuth:`Erweiterte Authentifizierung`,advancedAuthEnabled:`Erweiterte Authentifizierung ist aktiviert`,advancedAuthEnabledDesc:`E-Mail-basierte Benutzerverwaltungsfunktionen sind aktiv. Neue Benutzer erhalten automatisch generierte Passwörter per E-Mail und können ihr Passwort über die Passwort vergessen Funktion zurücksetzen.`,advancedAuthDisabled:`Erweiterte Authentifizierung ist deaktiviert`,advancedAuthDisabledDesc:`Aktivieren Sie die erweiterte Authentifizierung, um E-Mail-basierte Funktionen für die Benutzerverwaltung zu aktivieren.`,enable:`Aktivieren`,disable:`Deaktivieren`,feature1:`Passwörter werden automatisch generiert und an neue Benutzer gesendet`,feature2:`Benutzer können sich mit Benutzername oder E-Mail anmelden`,feature3:`Passwort vergessen Funktion ist verfügbar`,feature4:`Administratoren können Benutzerpasswörter per E-Mail zurücksetzen`,errors:{requiredFields:`Bitte füllen Sie alle Pflichtfelder aus`,usernameRequired:`Benutzername ist erforderlich, wenn Authentifizierung aktiviert ist`,enterTestEmail:`Bitte geben Sie eine Test-E-Mail-Adresse ein`,smtpServerAndEmail:`Bitte füllen Sie SMTP-Server und Absender-E-Mail aus, bevor Sie testen`,usernamePasswordRequired:`Benutzername und Passwort sind erforderlich, wenn Authentifizierung aktiviert ist`,configureSmtpFirst:`Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen`,enableAuthFirst:`Bitte aktivieren Sie zuerst die Authentifizierung, um E-Mail-basierte Funktionen nutzen zu können.`},success:{settingsSaved:`SMTP-Einstellungen erfolgreich gespeichert`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`Keine (Port 25)`},authOptions:{enabled:`Aktiviert`,disabled:`Deaktiviert`}},appearance:`Erscheinungsbild`,notifications:`Benachrichtigungen`,smartPlugs:`Smart Plugs`,spoolman:`Spoolman`,updates:`Aktualisierungen`,language:`Sprache`,languageDescription:`Wählen Sie Ihre bevorzugte Sprache`,theme:`Design`,themeLight:`Hell`,themeDark:`Dunkel`,themeSystem:`System`,defaultView:`Standardansicht`,defaultViewDescription:`Seite, die beim Öffnen der App angezeigt wird`,checkForUpdates:`Nach Updates suchen`,autoUpdate:`Automatische Updates`,currentVersion:`Aktuelle Version`,latestVersion:`Neueste Version`,upToDate:`Sie sind auf dem neuesten Stand`,updateAvailable:`Update verfügbar`,notificationLanguage:`Benachrichtigungssprache`,notificationLanguageDescription:`Sprache für Push-Benachrichtigungen`,bedCooledThreshold:`Bett-Abkühlung Schwellenwert`,bedCooledThresholdDescription:`Temperatur, unter der das Bett nach einem Druck als abgekühlt gilt`,userNotificationsEnabled:`Benutzerbenachrichtigungen`,userNotificationsEnabledDescription:`Aktiviert das Benutzerbenachrichtigungsmenü und E-Mail-Benachrichtigungen für Druckereignisse. Erfordert Erweiterte Authentifizierung.`,userNotificationsDisabledHint:`Erweiterte Authentifizierung aktivieren, um Benutzerbenachrichtigungen zu verwenden.`,notificationProviders:`Benachrichtigungsanbieter`,addProvider:`Anbieter hinzufügen`,editProvider:`Anbieter bearbeiten`,providerType:`Anbietertyp`,testNotification:`Testbenachrichtigung`,testSuccess:`Testbenachrichtigung erfolgreich gesendet`,testFailed:`Testbenachrichtigung konnte nicht gesendet werden`,quietHours:`Ruhezeiten`,quietHoursDescription:`Keine Störungen während dieser Zeiten`,quietHoursStart:`Beginn`,quietHoursEnd:`Ende`,events:{title:`Benachrichtigungsereignisse`,printStart:`Druck gestartet`,printComplete:`Druck abgeschlossen`,printFailed:`Druck fehlgeschlagen`,printStopped:`Druck gestoppt`,printProgress:`Fortschrittsmeldungen`,printProgressDescription:`Bei 25%, 50%, 75% benachrichtigen`,printerOffline:`Drucker offline`,printerError:`Druckerfehler`,filamentLow:`Filament niedrig`,maintenanceDue:`Wartung fällig`,maintenanceDueDescription:`Benachrichtigen, wenn Wartung erforderlich`},smartPlug:{title:`Smart Plugs`,add:`Smart Plug hinzufügen`,edit:`Smart Plug bearbeiten`,name:`Name`,ipAddress:`IP-Adresse`,linkedPrinter:`Verknüpfter Drucker`,autoOn:`Automatisch einschalten`,autoOnDescription:`Einschalten beim Druckstart`,autoOff:`Automatisch ausschalten`,autoOffDescription:`Ausschalten nach Druckende`,offDelay:`Ausschaltverzögerung`,offDelayMinutes:`Minuten nach Druck`,offDelayTemp:`Wenn Düse unter Temperatur`,currentState:`Aktueller Status`,turnOn:`Einschalten`,turnOff:`Ausschalten`},filamentTracking:`Filament-Verfolgung`,filamentTrackingDesc:`Wählen Sie, wie Sie Ihre Filamentspulen verfolgen möchten. Sie können das integrierte Inventar oder einen externen Spoolman-Server verwenden.`,filamentChecks:`Filament-Prüfungen`,disableFilamentWarnings:`Filament-Warnungen deaktivieren`,disableFilamentWarningsDesc:`Keine Warnungen über unzureichendes Filament beim Drucken oder Einreihen anzeigen`,preferLowestFilament:`Niedrigsten Filamentrest bevorzugen`,preferLowestFilamentDesc:`Bei mehreren passenden Spulen die mit dem geringsten Restfilament verwenden`,preferLowestFilamentBackupNote:`Wirkt nur, wenn AMS Filament Backup am Drucker aktiviert ist — sonst kann der Drucker beim Aufbrauchen der ersten Spule nicht auf eine zweite Spule wechseln.`,trackingModeBuiltIn:`Integriertes Inventar`,trackingModeBuiltInDesc:`RFID-Erkennung und Verbrauchserfassung inklusive`,trackingModeSpoolmanDesc:`Externer Filament-Management-Server`,builtInFeatureRfid:`Erkennt automatisch Bambu Lab RFID-Spulen im AMS`,builtInFeatureUsage:`Erfasst den Filamentverbrauch pro Druck`,builtInFeatureCatalog:`Spulen, Farben und K-Faktor-Profile verwalten`,builtInFeatureThirdParty:`Drittanbieter-Spulen können Inventarspulen zugewiesen werden`,amsSyncButton:`Gewichte vom AMS synchronisieren`,amsSyncTitle:`Spulengewichte vom AMS synchronisieren`,amsSyncMessage:`Alle Inventar-Spulengewichte werden mit den aktuellen AMS-Restwerten der verbundenen Drucker überschrieben. Verwenden Sie dies zur Wiederherstellung beschädigter Gewichtsdaten. Drucker müssen online sein.`,amsSyncing:`Synchronisiere...`,amsSyncSuccess:`{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen`,amsSyncError:`Synchronisierung der Gewichte vom AMS fehlgeschlagen`,spoolmanAmsSyncButton:`Spoolman-Gewichte vom AMS synchronisieren`,spoolmanAmsSyncTitle:`Spoolman-Spulengewichte vom AMS synchronisieren`,spoolmanAmsSyncMessage:`Dabei werden alle Spoolman-Spulengewichte anhand der aktuellen AMS-Füllstandswerte der verbundenen Drucker aktualisiert. Die Drucker müssen online sein.`,spoolmanAmsSyncing:`Synchronisiere...`,spoolmanAmsSyncSuccess:`{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen`,spoolmanAmsSyncError:`Synchronisierung der Spoolman-Gewichte vom AMS fehlgeschlagen`,spoolmanAmsSyncErrorUnreachable:`Synchronisierung fehlgeschlagen (Spoolman nicht erreichbar)`,spoolmanAmsSyncErrorNotConfigured:`Synchronisierung fehlgeschlagen (Spoolman nicht konfiguriert)`,spoolmanNotConfigured:`Spoolman nicht konfiguriert`,spoolmanFilamentCatalogTitle:`Spoolman-Filamentkatalog`,spoolmanFilamentCatalogDesc:`Filamentnamen und Leergewichte aus deiner Spoolman-Instanz. Name und Spulengewicht sind hier editierbar; alle anderen Eigenschaften werden direkt in Spoolman verwaltet.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`URL Ihres Spoolman-Servers (z.B. http://localhost:7912)`,spoolmanConnected:`Verbunden`,spoolmanDisconnected:`Nicht verbunden`,status:`Status`,connect:`Verbinden`,disconnect:`Trennen`,howSyncWorks:`So funktioniert die Synchronisierung`,syncInfoRfidOnly:`Nur offizielle Bambu Lab Spulen mit RFID werden synchronisiert`,syncInfoAutoCreate:`Neue Spulen werden bei der ersten Synchronisierung automatisch in Spoolman erstellt`,syncInfoThirdPartySkipped:`Nicht-Bambu-Lab-Spulen (Drittanbieter, nachgefüllt) werden übersprungen`,linkingExistingSpools:`Vorhandene Spulen verknüpfen`,linkingExistingSpoolsDesc:`Um vorhandene Spoolman-Spulen mit Ihrem AMS zu verknüpfen, fahren Sie über einen AMS-Slot und klicken Sie auf "Mit Spoolman verknüpfen".`,syncMode:`Synchronisierungsmodus`,syncModeAuto:`Automatisch`,syncModeManual:`Nur manuell`,syncModeAutoDesc:`AMS-Daten werden automatisch synchronisiert, wenn Änderungen erkannt werden`,syncModeManualDesc:`Nur bei manueller Auslösung synchronisieren`,syncAmsData:`AMS-Daten synchronisieren`,syncAmsDataDesc:`AMS-Daten des Druckers manuell mit Spoolman synchronisieren`,allPrinters:`Alle Drucker`,noDefaultPrinter:`Kein Standard (jedes Mal fragen)`,sidebarOrder:`Seitenleisten-Reihenfolge`,saveThumbnails:`Vorschaubilder speichern`,captureFinishPhoto:`Abschlussfoto aufnehmen`,noPrintersConfigured:`Keine Drucker konfiguriert`,archiveMode:{always:`Immer Archiveintrag erstellen`,never:`Nie Archiveintrag erstellen`,ask:`Jedes Mal fragen`},checkForUpdatesLabel:`Nach Updates suchen`,checkPrinterFirmware:`Drucker-Firmware prüfen`,includeBetaUpdates:`Beta-Versionen einschließen`,includeBetaUpdatesDesc:`Über Beta- und Vorabversionen bei der Updateprüfung benachrichtigen`,enableRetry:`Wiederholung aktivieren`,homeAssistantDescription:`Smart Plugs über Home Assistant steuern`,environmentManagedLabel:`(Umgebungsvariable)`,autoEnabledViaEnv:`Automatisch über Umgebungsvariablen aktiviert`,urlFromEnvReadOnly:`Wert wird über HA_URL Umgebungsvariable gesetzt (schreibgeschützt)`,tokenFromEnvReadOnly:`Wert wird über HA_TOKEN Umgebungsvariable gesetzt (schreibgeschützt)`,mqttConnectedTo:`Verbunden mit`,prometheusDescription:`Druckerdaten im Prometheus-Format bereitstellen`,noSmartPlugsTitle:`Keine Smart Plugs konfiguriert`,noSmartPlugsDescription:`Fügen Sie einen Tasmota-basierten Smart Plug hinzu, um den Energieverbrauch zu verfolgen und die Stromsteuerung zu automatisieren.`,noProvidersTitle:`Keine Anbieter konfiguriert`,noProvidersDescription:`Fügen Sie einen Anbieter hinzu, um Benachrichtigungen zu erhalten.`,noTemplatesAvailable:`Keine Vorlagen verfügbar. Starten Sie das Backend neu, um Standardvorlagen zu laden.`,apiPermissionView:`Druckerstatus und Warteschlange anzeigen`,apiPermissionEdit:`Elemente zur Druckwarteschlange hinzufügen und entfernen`,apiKeysEmptyTitle:`Keine API-Schlüssel`,apiKeysEmptyDescription:`Erstellen Sie einen API-Schlüssel zur Integration mit externen Diensten.`,noUsersFound:`Keine Benutzer gefunden`,noGroupsFound:`Keine Gruppen gefunden`,noGroupsAvailable:`Keine Gruppen verfügbar`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,systemGroupWarning:`System-Gruppennamen können nicht geändert werden`,authDisabledTitle:`Authentifizierung ist deaktiviert`,authDisabledFeature1:`Anmeldung zum Zugriff auf das System erforderlich`,authDisabledFeature2:`Mehrere Benutzer mit gruppenbasierten Berechtigungen erstellen`,authDisabledFeature3:`Zugriff mit über 50 granularen Berechtigungen steuern`,userHasCreated:`Dieser Benutzer hat erstellt:`,userItemsQuestion:`Was möchten Sie mit diesen Elementen tun?`,deleteUserConfirm:`Möchten Sie diesen Benutzer wirklich löschen?`,actionCannotBeUndone:`Diese Aktion kann nicht rückgängig gemacht werden.`,addFirstSmartPlug:`Ersten Smart Plug hinzufügen`,providers:`Anbieter`,log:`Protokoll`,testAll:`Alle testen`,testResults:`Testergebnisse`,testPassedCount:`{{count}} bestanden`,testFailedCount:`{{count}} fehlgeschlagen`,messageTemplates:`Nachrichtenvorlagen`,messageTemplatesDescription:`Passen Sie Benachrichtigungen für jedes Ereignis an.`,apiKeys:`API-Schlüssel`,apiKeysDescription:`Erstellen Sie API-Schlüssel für externe Integrationen und Webhooks.`,createKey:`Schlüssel erstellen`,apiKeyCreated:`API-Schlüssel erfolgreich erstellt`,apiKeyCopyWarning:`Kopieren Sie diesen Schlüssel jetzt - er wird nicht mehr angezeigt!`,useInApiBrowser:`Im API-Browser verwenden`,apiKeyQrButton:`QR-Code`,apiKeyQrTitle:`Zum Einrichten scannen`,apiKeyQrCaption:`Mit deiner mobilen App scannen, um diesen Server und API-Schlüssel hinzuzufügen.`,apiKeyQrWarning:`Enthält deinen geheimen API-Schlüssel – nicht teilen oder dort abfotografieren, wo andere ihn sehen können.`,createNewApiKey:`Neuen API-Schlüssel erstellen`,keyName:`Schlüsselname`,keyNamePlaceholder:`z.B. Home Assistant, OctoPrint`,readStatus:`Status lesen`,readStatusDescription:`Druckerstatus und Warteschlange anzeigen`,manageQueue:`Warteschlange verwalten`,manageQueueDescription:`Elemente zur Druckwarteschlange hinzufügen und entfernen`,controlPrinter:`Drucker steuern`,controlPrinterDescription:`Drucke pausieren, fortsetzen und stoppen`,manageLibrary:`Bibliothek verwalten`,manageLibraryDescription:`Bibliotheksdateien hochladen, umbenennen und löschen; Modelle aus MakerWorld importieren`,manageInventory:`Bestand verwalten`,manageInventoryDescription:`Spulen und Bestandseinträge anlegen, ändern und löschen. Erforderlich für SpoolBuddy-Kioske (NFC-Scan, Waagenmessungen, Kiosk-Systembefehle).`,libraryBadge:`Bibliothek`,inventoryBadge:`Bestand`,cloudAccess:`Cloud-Zugriff erlauben`,cloudAccessDescription:`Liest Bambu-Cloud-Presets und -Filamente in Ihrem Namen. Erfordert eine Anmeldung in Bambu Cloud.`,cloudBadge:`Cloud`,updateEnergyCost:`Strompreis aktualisieren`,updateEnergyCostDescription:`Erlaubt diesem Schlüssel, einen neuen Strompreis pro kWh an /settings/electricity-price zu senden. Nützlich für Home-Assistant-Automatisierungen mit dynamischen Tarifen (Tibber, Octopus usw.). Dies ist das einzige Einstellungsfeld, das per API-Schlüssel schreibbar ist.`,energyCostBadge:`Energie`,legacyKey:`Alt`,legacyKeyTooltip:`Wurde vor der nutzerbezogenen Eigentümerschaft erstellt; neu erstellen, um Cloud-Zugriff zu nutzen`,unnamedKey:`Unbenannter Schlüssel`,lastUsed:`Zuletzt verwendet`,read:`Lesen`,control:`Steuern`,createFirstKey:`Ersten Schlüssel erstellen`,webhookEndpoints:`Webhook-Endpunkte`,webhookApiKeyHint:`Verwenden Sie Ihren API-Schlüssel im X-API-Key-Header.`,webhook:{getAllStatus:`Alle Druckerstatus abrufen`,getSpecificStatus:`Spezifischen Druckerstatus abrufen`,addToQueue:`Zur Druckwarteschlange hinzufügen`,pausePrint:`Druck pausieren`,resumePrint:`Druck fortsetzen`,stopPrint:`Druck stoppen`},apiBrowser:`API-Browser`,apiBrowserDescription:`Erkunden und testen Sie alle verfügbaren API-Endpunkte.`,apiKeyForTesting:`API-Schlüssel zum Testen`,apiKeyPlaceholder:`Fügen Sie hier Ihren API-Schlüssel ein, um authentifizierte Endpunkte zu testen...`,apiKeyHint:`Dieser Schlüssel wird als X-API-Key-Header mit Anfragen gesendet.`,deleteApiKeyTitle:`API-Schlüssel löschen`,deleteApiKeyMessage:`Möchten Sie diesen API-Schlüssel wirklich löschen? Alle Integrationen, die diesen Schlüssel verwenden, funktionieren nicht mehr.`,deleteKey:`Schlüssel löschen`,amsDisplayThresholds:`AMS-Anzeigeschwellenwerte`,amsThresholdsDescription:`Konfigurieren Sie Farbschwellenwerte für AMS-Feuchtigkeits- und Temperaturanzeigen.`,humidity:`Luftfeuchtigkeit`,goodGreen:`Gut (grün)`,fairOrange:`Mittel (orange)`,aboveFairBad:`Über dem mittleren Schwellenwert wird rot angezeigt (schlecht)`,fairAlsoDryingThreshold:`Dieser Schwellenwert wird auch für die automatische Trocknung verwendet`,temperature:`Temperatur`,goodBlue:`Gut (blau)`,aboveFairHot:`Über dem mittleren Schwellenwert wird rot angezeigt (heiß)`,historyRetention:`Verlaufsaufbewahrung`,keepSensorHistory:`Sensorverlauf behalten für`,historyRetentionDescription:`Ältere Feuchtigkeits- und Temperaturdaten werden automatisch gelöscht`,defaultPrintOptions:`Standard-Druckoptionen`,defaultPrintOptionsDescription:`Standardwerte für Druckoptionen bei neuen Drucken festlegen. Diese können im Druckdialog pro Druck überschrieben werden.`,defaultBedLevelling:`Bett-Nivellierung`,defaultBedLevellingDesc:`Bett vor dem Druck automatisch nivellieren`,defaultFlowCali:`Fluss-Kalibrierung`,defaultFlowCaliDesc:`Extrusionsfluss kalibrieren`,defaultVibrationCali:`Vibrationskalibrierung`,defaultVibrationCaliDesc:`Ringing-Artefakte reduzieren`,defaultLayerInspect:`Erste-Schicht-Inspektion`,defaultLayerInspectDesc:`KI-Inspektion der ersten Schicht`,defaultTimelapse:`Zeitraffer`,defaultTimelapseDesc:`Zeitraffervideo aufnehmen`,defaultNozzleOffsetCali:`Düsenversatz-Kalibrierung`,defaultNozzleOffsetCaliDesc:`Düsenversatz zwischen Extrudern kalibrieren`,tempFanPresetsTitle:`Temperatur- und Lüfter-Vorgaben`,tempFanPresetsDescription:`Passen Sie die Schnellwahlwerte in den Temperatur- und Lüfter-Popovers der Druckerkarte an. Die Aus-Schaltfläche wird immer angezeigt.`,tempFanPresetsNozzle:`Düsentemperatur`,tempFanPresetsBed:`Betttemperatur`,tempFanPresetsChamber:`Kammertemperatur`,tempFanPresetsFan:`Lüftergeschwindigkeit`,tempFanPresetsReset:`Auf Standardwerte zurücksetzen`,staggeredStart:`Versetzter Start`,staggeredStartDescription:`Standard-Gruppengröße und -Intervall beim Staffeln von Mehrdrucker-Batchstarts. Pro Batch im Druck-Dialog überschreibbar.`,plateClear:`Druckplatte-Bestätigung`,requirePlateClear:`Druckplatte-Bestätigung erforderlich`,requirePlateClearDescription:`Wenn aktiviert, wartet der Scheduler auf eine Druckplatten-Bestätigung pro Drucker, bevor geplante Drucke auf Druckern mit abgeschlossenen Aufträgen gestartet werden. Wenn dies deaktiviert ist, werden auch das Druckplatten-Status-Badge und die Schaltfläche "Druckplatte als freigegeben markieren" auf den Druckerkarten ausgeblendet.`,gcodeInjection:`G-Code-Injektion`,gcodeInjectionDescription:`Konfigurieren Sie benutzerdefinierten G-code, der am Anfang und/oder Ende von Drucken für Auto-Print-Systeme wie Farmloop, SwapMod, AutoClear und Printflow 3D eingefügt wird. Snippets werden pro Druckermodell konfiguriert und angewendet, wenn "G-code einfügen" bei einem Warteschlangen-Element aktiviert ist.`,gcodeInjectionNoPrinters:`Keine Drucker gefunden. Fügen Sie Drucker hinzu, um G-code-Snippets zu konfigurieren.`,gcodeStartLabel:`Start-G-Code`,gcodeEndLabel:`End-G-Code`,gcodeStartPlaceholder:`G-code, der vor dem Druckstart eingefügt wird...`,gcodeEndPlaceholder:`G-code, der nach dem Druckende angefügt wird...`,staggerGroupSize:`Gruppengröße`,staggerGroupSizeHelp:`Anzahl gleichzeitig zu startender Drucker pro Gruppe`,staggerInterval:`Intervall (Minuten)`,staggerIntervalHelp:`Verzögerung zwischen Gruppenstart`,queueDrying:`Automatische Trocknung`,queueDryingDescription:`AMS-Filament automatisch trocknen, wenn der Drucker zwischen Warteschlangen-Drucken im Leerlauf ist. Verwendet den Feuchtigkeitsschwellenwert oben.`,queueDryingEnabled:`Automatische Trocknung aktivieren`,queueDryingEnabledDescription:`AMS-Trocknung automatisch starten, wenn der Drucker im Leerlauf ist und die Feuchtigkeit über dem Schwellenwert liegt`,queueDryingBlock:`Auf Trocknung warten`,queueDryingBlockDescription:`Druckwarteschlange blockieren, bis die Trocknung abgeschlossen ist. Wenn aus, haben Drucke Vorrang.`,ambientDryingEnabled:`Umgebungstrocknung`,ambientDryingEnabledDescription:`Filament auf inaktiven Druckern automatisch trocknen, wenn die Luftfeuchtigkeit den Schwellenwert überschreitet — auch ohne Warteschlange.`,dryingPresets:`Trocknungsvoreinstellungen`,dryingPresetsDescription:`Temperatur und Dauer pro Filamenttyp. AMS 2 Pro verwendet niedrigere Temperaturen, AMS-HT unterstützt höhere.`,dryingFilament:`Filament`,humidityThresholds:`Feuchtigkeitsschwellen`,humidityThresholdsDescription:`Feuchtigkeitsauslöser pro Filamenttyp für Auto-Trocknung und Alarme. Bei gemischter Bestückung gilt der niedrigste Wert.`,humidityThresholdCol:`Schwellenwert`,humidityThresholdDefault:`Standard (unbekannte Typen)`,printModal:`Druckdialog`,expandCustomMapping:`Benutzerdefinierte Zuordnung standardmäßig erweitern`,expandCustomMappingDescription:`Bei Druck auf mehrere Drucker die AMS-Zuordnung pro Drucker erweitert anzeigen`,authentication:`Authentifizierung`,authEnabledDescription:`Ihre Instanz ist mit Benutzerauthentifizierung gesichert`,authDisabledDescription:`Aktivieren Sie die Anmeldepflicht und verwalten Sie den Benutzerzugriff`,authDisabledMessage:`Aktivieren Sie die Authentifizierung, um Benutzerkonten zu erstellen, Berechtigungen zu verwalten und Ihre Bambuddy-Instanz zu sichern.`,enableAuthentication:`Authentifizierung aktivieren`,currentUser:`Aktueller Benutzer`,changePassword:`Passwort ändern`,admin:`Admin`,users:`Benutzer`,addUser:`Benutzer hinzufügen`,groups:`Gruppen`,addGroup:`Gruppe hinzufügen`,system:`System`,noDescription:`Keine Beschreibung`,userCount:`{{count}} Benutzer`,permissionCount:`{{count}} Berechtigungen`,createUser:`Benutzer erstellen`,username:`Benutzername`,enterUsername:`Benutzername eingeben`,password:`Passwort`,enterPassword:`Passwort eingeben`,passwordRequirements:`Mindestens 8 Zeichen, davon ein Großbuchstabe, ein Kleinbuchstabe, eine Ziffer und ein Sonderzeichen.`,confirmPassword:`Passwort bestätigen`,confirmPasswordPlaceholder:`Passwort bestätigen`,viewReleaseOnGitHub:`Release auf GitHub anzeigen`,turnAllPlugsOn:`Alle Stecker einschalten`,turnAllPlugsOff:`Alle Stecker ausschalten`,clearNotificationLogs:`Benachrichtigungsprotokolle löschen`,clearLogsMessage:`Dadurch werden alle Benachrichtigungsprotokolle, die älter als 30 Tage sind, dauerhaft gelöscht. Diese Aktion kann nicht rückgängig gemacht werden.`,clearLogs:`Protokolle löschen`,resetUiPreferences:`UI-Einstellungen zurücksetzen`,resetUiPreferencesMessage:`Dadurch werden alle UI-Einstellungen auf Standardwerte zurückgesetzt: Seitenleisten-Reihenfolge, Theme, Dashboard-Layout, Ansichtsmodi und Sortiereinstellungen. Ihre Drucker, Archive und Servereinstellungen werden NICHT beeinträchtigt. Die Seite wird nach dem Löschen neu geladen.`,resetPreferences:`Einstellungen zurücksetzen`,deleteGroupTitle:`Gruppe löschen`,deleteGroupMessage:`Möchten Sie diese Gruppe wirklich löschen? Benutzer in dieser Gruppe verlieren diese Berechtigungen.`,deleteGroup:`Gruppe löschen`,disableAuthenticationTitle:`Authentifizierung deaktivieren`,disableAuthenticationMessage:`Möchten Sie die Authentifizierung wirklich deaktivieren? Dadurch wird Ihre Bambuddy-Instanz ohne Anmeldung zugänglich. Alle Benutzer bleiben in der Datenbank, aber die Authentifizierung wird deaktiviert.`,disableAuthentication:`Authentifizierung deaktivieren`,configureBambuddy:`Bambuddy konfigurieren`,systemDefault:`Systemstandard`,archiveSettings:`Archiv-Einstellungen`,newWindow:`Neues Fenster`,embeddedOverlay:`Eingebettetes Overlay`,preferredSlicer:`Bevorzugter Slicer`,preferredSlicerDescription:`Slicer für das In-App-Slicen über das API-Sidecar`,openInSlicerLabel:`Im Slicer öffnen`,openInSlicerInherit:`Wie API-Slicer`,openInSlicerDescription:`Desktop-Slicer, der vom „Im Slicer öffnen"-Button verwendet wird. Auf „Wie API-Slicer" belassen, um zu erben, oder einen anderen Slicer für die lokale Nutzung wählen.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev haben bekannte CLI-Bugs, die das Slicen vieler von BambuStudio erstellter 3MF-Dateien blockieren — siehe Upstream-Issues #12426 (Segfault bei bemalten Multi-Extruder-Dateien) und #13386 (zu strikte Parameter-Range-Validierung). Bis die Upstream-Fixes verfügbar sind, wird Bambu Studio empfohlen.`,useSlicerApi:`Slicer-API verwenden`,useSlicerApiDescription:`Wenn aktiv, öffnen "Slice"-Aktionen das in-App Slicer-Modal und rufen den Slicer-API-Sidecar. Aus (Standard): Übergabe an den Desktop-Slicer per URI-Schema.`,slicerCard:`Slicer`,orcaslicerApiUrl:`OrcaSlicer Sidecar-URL`,bambuStudioApiUrl:`Bambu Studio Sidecar-URL`,slicerApiUrlDescription:`URL des Slicer-API-Sidecar-Containers. Leer lassen, um die SLICER_API_URL- bzw. BAMBU_STUDIO_API_URL-Umgebungsvariablen zu nutzen.`,slicerBundlesRemoved:{title:`Slicer-Bundles (entfernt)`,description:`Der Import von Drucker-Voreinstellungs-Bundles (.bbscfg) wurde entfernt. Der Bundle-Export von BambuStudio enthält nur benutzerdefinierte Voreinstellungen, daher lieferte der Import nie die Standard-Prozesse / -Filamente, und das Slicen fiel auf eingebettete Einstellungen zurück.`,alternatives:`Verwende Einzel-Voreinstellungs-Import für individuelle Anpassungen oder synchronisiere via Bambu Cloud / Orca Cloud. Standard-Voreinstellungen kommen automatisch vom Slicer-Sidecar.`,lookupOrder:`Reihenfolge der Voreinstellungssuche beim Slicen: 1) Importiert (lokal), 2) Orca Cloud, 3) Bambu Cloud, 4) Standard (Sidecar-Fallback).`},externalCameras:`Externe Kameras`,costTracking:`Kostenverfolgung`,printsOnly:`Nur Drucke`,totalConsumption:`Gesamtverbrauch`,dataManagement:`Datenverwaltung`,storageUsage:`Speichernutzung`,storageUsageDescription:`Aufschlüsselung der Datennutzung nach Kategorie`,storageUsageTotal:`Gesamt`,storageUsageErrors:`Fehler`,storageUsageOtherBreakdown:`Sonstiges (enthält statische Assets, Skripte und Konfigurationsdateien)`,storageUsageSystem:`System`,storageUsageData:`Daten`,storageUsageUnavailable:`Speichernutzungsinformationen nicht verfügbar`,clearNotificationLogsDescription:`Benachrichtigungsprotokolle älter als 30 Tage löschen`,resetUiPreferencesDescription:`Seitenleisten-Reihenfolge, Theme, Ansichtsmodi und Layout-Einstellungen zurücksetzen. Drucker, Archive und Einstellungen werden nicht beeinflusst.`,enableHomeAssistant:`Home Assistant aktivieren`,enableMqtt:`MQTT aktivieren`,useTls:`TLS verwenden`,enableMetricsEndpoint:`Metrik-Endpunkt aktivieren`,availableMetrics:`Verfügbare Metriken`,editUser:`Benutzer bearbeiten`,deleteUserTitle:`Benutzer löschen`,groupName:`Gruppenname`,leaveEmptyForAnonymous:`Leer lassen für anonym`,leaveEmptyForNoAuth:`Leer lassen für keine Authentifizierung`,enterNewPassword:`Neues Passwort eingeben`,confirmNewPassword:`Neues Passwort bestätigen`,enterGroupName:`Gruppenname eingeben`,enterDescriptionOptional:`Beschreibung eingeben (optional)`,enterCurrentPassword:`Aktuelles Passwort eingeben`,enterNewPasswordMin6:`Neues Passwort eingeben (min. 6 Zeichen)`,toast:{keyCopied:`Schlüssel in Zwischenablage kopiert`,copyFailed:`Schlüssel konnte nicht kopiert werden`,keyAddedToBrowser:`Schlüssel zum API-Browser hinzugefügt`,clearLogsFailed:`Protokolle konnten nicht gelöscht werden`,uiPreferencesReset:`UI-Einstellungen zurückgesetzt. Wird neu geladen...`,authDisabled:`Authentifizierung erfolgreich deaktiviert`,authDisableFailed:`Authentifizierung konnte nicht deaktiviert werden`,apiKeyCreated:`API-Schlüssel erstellt`,apiKeyDeleted:`API-Schlüssel gelöscht`,userCreated:`Benutzer erfolgreich erstellt`,userUpdated:`Benutzer erfolgreich aktualisiert`,userDeleted:`Benutzer erfolgreich gelöscht`,groupCreated:`Gruppe erfolgreich erstellt`,groupUpdated:`Gruppe erfolgreich aktualisiert`,groupDeleted:`Gruppe erfolgreich gelöscht`,fillRequiredFields:`Bitte füllen Sie alle erforderlichen Felder aus`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 8 Zeichen lang sein`,passwordNeedsUppercase:`Passwort muss mindestens einen Großbuchstaben enthalten`,passwordNeedsLowercase:`Passwort muss mindestens einen Kleinbuchstaben enthalten`,passwordNeedsDigit:`Passwort muss mindestens eine Ziffer enthalten`,passwordNeedsSpecial:`Passwort muss mindestens ein Sonderzeichen enthalten`,enterGroupName:`Bitte geben Sie einen Gruppennamen ein`,settingsSaved:`Einstellungen gespeichert`,noPermissionUpdate:`Sie haben keine Berechtigung, Einstellungen zu ändern`,cameraSettingsSaved:`Kamera-Einstellungen gespeichert`,enterCameraUrl:`Bitte geben Sie eine Kamera-URL ein`,passwordChanged:`Passwort erfolgreich geändert`,connectionFailed:`Verbindung fehlgeschlagen`,testFailed:`Test fehlgeschlagen`,cameraConnected:`Kamera verbunden{{resolution}}`},testConnection:`Verbindung testen`,catalog:{spoolCatalog:`Spulenkatalog`,spoolCatalogDescription:`Leerspulengewichte nach Marke/Typ. Wird für die automatische Gewichtssuche beim Hinzufügen von Spulen verwendet.`,searchCatalog:`Katalog durchsuchen...`,addNewEntry:`Neuen Eintrag hinzufügen`,namePlaceholder:`Name (z.B. Bambu Lab - Plastik)`,weight:`Gewicht`,type:`Typ`,default:`Standard`,custom:`Benutzerdefiniert`,noMatch:`Keine Einträge entsprechen Ihrer Suche`,empty:`Keine Einträge im Katalog`,deleteEntry:`Eintrag löschen`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,resetCatalog:`Katalog zurücksetzen`,resetConfirm:`Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Einträge werden entfernt.`,loadFailed:`Spulenkatalog konnte nicht geladen werden`,nameWeightRequired:`Name und Gewicht sind erforderlich`,entryAdded:`Eintrag hinzugefügt`,addFailed:`Eintrag konnte nicht hinzugefügt werden`,entryUpdated:`Eintrag aktualisiert`,updateFailed:`Eintrag konnte nicht aktualisiert werden`,entryDeleted:`Eintrag gelöscht`,deleteFailed:`Eintrag konnte nicht gelöscht werden`,resetSuccess:`Katalog auf Standardwerte zurückgesetzt`,resetFailed:`Katalog konnte nicht zurückgesetzt werden`,exported:`{{count}} Einträge exportiert`,imported:`{{added}} Einträge importiert ({{skipped}} übersprungen)`,importFailed:`Import fehlgeschlagen: ungültiges JSON-Format`,exportTooltip:`Katalog als JSON exportieren`,importTooltip:`Katalog aus JSON importieren`,resetTooltip:`Auf Standardwerte zurücksetzen`,selectedCount:`{{count}} ausgewählt`,deleteSelected:`Ausgewählte löschen`,bulkDeleteConfirm:`Möchten Sie {{count}} Einträge wirklich löschen?`,bulkDeleted:`{{count}} Einträge gelöscht`,bulkDeleteFailed:`Fehler beim Löschen der Einträge`,material:`Material`,spoolWeight:`Spulengewicht`,color:`Farbe`,updateSpoolWeight:`Spulengewicht aktualisieren`,filamentUpdated:`Filament aktualisiert`,filamentUpdateFailed:`Filament konnte nicht aktualisiert werden`,filamentUpdateInvalid:`Ungültige Filamentdaten`,keepExistingSpoolWeight:`Altes Gewicht für bestehende Spulen behalten`,keepExistingSpoolWeightDesc:`Bereits erstellte Spulen dieses Filamenttyps behalten das alte Leergewicht. Neue Spulen nutzen den neuen Wert.`,applyToAllSpools:`Auf alle Spulen anwenden`,applyToAllSpoolsDesc:`Alle Gewichtsberechnungen für diesen Filamenttyp nutzen sofort das neue Leergewicht.`},colorCatalog:{title:`Farbkatalog`,description:`Filamentfarben nach Hersteller/Material. Wird für die automatische Farbsuche beim Hinzufügen von Spulen verwendet.`,searchColors:`Farben durchsuchen...`,allManufacturers:`Alle Hersteller`,addNewColor:`Neue Farbe hinzufügen`,manufacturer:`Hersteller`,colorName:`Farbname`,hex:`Hex`,materialOptional:`Material (optional)`,showing:`{{filtered}} von {{total}} Farben angezeigt`,noMatch:`Keine Farben entsprechen Ihrer Suche`,empty:`Keine Farben im Katalog`,deleteColor:`Farbe löschen`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,resetCatalog:`Farbkatalog zurücksetzen`,resetConfirm:`Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Farben werden entfernt.`,sync:`Synchron.`,starting:`Starten...`,syncTooltip:`Von FilamentColors.xyz synchronisieren (2000+ Farben)`,loadFailed:`Farbkatalog konnte nicht geladen werden`,fieldsRequired:`Hersteller, Farbname und Hex-Farbe sind erforderlich`,colorAdded:`Farbe hinzugefügt`,addFailed:`Farbe konnte nicht hinzugefügt werden`,colorUpdated:`Farbe aktualisiert`,updateFailed:`Farbe konnte nicht aktualisiert werden`,colorDeleted:`Farbe gelöscht`,deleteFailed:`Farbe konnte nicht gelöscht werden`,resetSuccess:`Farbkatalog auf Standardwerte zurückgesetzt`,resetFailed:`Katalog konnte nicht zurückgesetzt werden`,syncUpToDate:`Bereits aktuell ({{count}} Farben geprüft)`,syncComplete:`{{added}} neue Farben hinzugefügt ({{skipped}} bereits vorhanden)`,syncError:`Sync-Fehler`,syncFailed:`Synchronisierung von FilamentColors.xyz fehlgeschlagen`,exported:`{{count}} Farben exportiert`,imported:`{{added}} Farben importiert ({{skipped}} übersprungen)`,importFailed:`Import fehlgeschlagen: ungültiges JSON-Format`,selectedCount:`{{count}} ausgewählt`,deleteSelected:`Ausgewählte löschen`,bulkDeleteConfirm:`Möchten Sie {{count}} Farben wirklich löschen?`,bulkDeleted:`{{count}} Farben gelöscht`,bulkDeleteFailed:`Fehler beim Löschen der Farben`},dateFormat:`Datumsformat`,dateFormatUs:`US (MM/TT/JJJJ)`,dateFormatEu:`EU (TT/MM/JJJJ)`,dateFormatIso:`ISO (JJJJ-MM-TT)`,timeFormat:`Zeitformat`,timeFormat12:`12-Stunden (3:30 PM)`,timeFormat24:`24-Stunden (15:30)`,defaultPrinter:`Standarddrucker`,defaultPrinterDescription:`Diesen Drucker für Uploads, Nachdrucke und andere Vorgänge vorauswählen.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Nutze das Seitenleisten-Layout, um Elemente neu anzuordnen, Sichtbarkeit zurückzusetzen und benutzerdefinierte Links zu verwalten.`,setDefault:`Standard setzen`,sidebarOrderSetDefaultHint:`Standard setzen übernimmt die aktuelle Menüreihenfolge für Benutzer, die ihre noch nicht angepasst haben.`,sidebarDefaultSet:`Standard-Menüreihenfolge wurde festgelegt.`,sidebarDefaultCleared:`Standard-Menüreihenfolge gelöscht.`,sidebarDefaultFailed:`Festlegen der Standard-Menüreihenfolge fehlgeschlagen.`,reset:`Zurücksetzen`,darkMode:`Dunkelmodus`,lightMode:`Hellmodus`,active:`(aktiv)`,background:`Hintergrund`,accent:`Akzent`,style:`Stil`,bgNeutral:`Neutral`,bgWarm:`Warm`,bgCool:`Kühl`,bgOled:`OLED Schwarz`,bgSlate:`Schieferblau`,bgForest:`Waldgrün`,accentGreen:`Grün`,accentTeal:`Türkis`,accentBlue:`Blau`,accentOrange:`Orange`,accentPurple:`Lila`,accentRed:`Rot`,styleClassic:`Klassisch`,styleGlow:`Leuchtend`,styleVibrant:`Lebendig`,themeToggleHint:`Zwischen Dunkel-, Hell- und Systemmodus mit dem Symbol in der Seitenleiste wechseln.`,autoArchivePrints:`Drucke automatisch archivieren`,autoArchiveDescription:`3MF-Dateien automatisch speichern, wenn Drucke abgeschlossen sind`,saveThumbnailsDescription:`Vorschaubilder aus 3MF-Dateien extrahieren und speichern`,captureFinishPhotoDescription:`Foto von der Druckerkamera aufnehmen, wenn der Druck abgeschlossen ist. Bambuddy zeichnet während des Drucks einen kurzen Zeitraffer auf, damit das Foto aus dem Moment vor dem Absenken der Druckplatte stammen kann. Die Zeitraffer-Datei bleibt erhalten, wenn du den Zeitraffer für diesen Druck aktiviert hast, andernfalls wird sie nach Aufnahme des Fotos automatisch gelöscht.`,ffmpegNotInstalled:`ffmpeg nicht installiert`,ffmpegRequired:`Kameraaufnahme benötigt ffmpeg. Installieren über brew install ffmpeg (macOS) oder apt install ffmpeg (Linux).`,camera:`Kamera`,cameraViewMode:`Kamera-Ansichtsmodus`,cameraOverlayDescription:`Kamera öffnet sich als größenveränderbares Overlay auf dem Hauptbildschirm`,cameraWindowDescription:`Kamera öffnet sich in einem separaten Browserfenster`,externalCamerasDescription:`Externe Kameras konfigurieren, um die eingebaute Druckerkamera zu ersetzen. Unterstützt MJPEG-Streams, RTSP, HTTP-Snapshots und USB-Kameras (V4L2). Wenn aktiviert, wird die externe Kamera für Live-Ansicht und Abschlussfotos verwendet.`,cameraPlaceholderUsb:`Gerätepfad (/dev/video0)`,cameraPlaceholderUrl:`Kamera-URL (rtsp://... oder http://...)`,cameraTypeMjpeg:`MJPEG-Stream`,cameraTypeRtsp:`RTSP-Stream`,cameraTypeSnapshot:`HTTP-Snapshot`,cameraTypeUsb:`USB-Kamera (V4L2)`,cameraSnapshotUrl:`Snapshot-URL (optional)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`URL für Einzelbildaufnahmen — wird für Benachrichtigungs-Vorschaubilder, Abschlussfotos, Schicht-Zeitraffer und Plattenerkennung verwendet. Zeitraffer und Plattenerkennung benötigen jeweils eigene drucker-spezifische Schalter — diese URL ist nur die Bildquelle, die sie verwenden, wenn sie aktiv sind. Leer lassen, um Bilder aus dem oben konfigurierten Live-Stream zu verwenden. Nützlich für go2rtc (/api/frame.jpeg) und IP-Kameras mit dediziertem Snapshot-Endpunkt.`,cameraRotation:`Drehung`,test:`Testen`,connected:`Verbunden`,disconnected:`Getrennt`,currency:`Währung`,defaultFilamentCost:`Standard-Filamentkosten (pro kg)`,electricityCost:`Stromkosten pro kWh`,energyDisplayMode:`Energieanzeige-Modus`,energyModePrintDescription:`Dashboard zeigt Summe der während Drucken verbrauchten Energie`,energyModeTotalDescription:`Dashboard zeigt Gesamtenergie der Smart Plugs`,fileManager:`Dateimanager`,createArchiveEntry:`Archiveintrag beim Drucken erstellen`,createArchiveEntryDescription:`Beim Drucken aus dem Dateimanager optional einen Archiveintrag erstellen`,lowDiskSpaceWarning:`Warnung bei wenig Speicherplatz`,lowDiskSpaceDescription:`Warnung anzeigen, wenn freier Speicherplatz unter diesen Schwellenwert fällt`,printerFirmware:`Drucker-Firmware`,checkFirmwareDescription:`Nach Firmware-Updates von Bambu Lab suchen`,bambuddySoftware:`Bambuddy-Software`,autoCheckDescription:`Automatisch beim Start nach neuen Versionen suchen`,checkNow:`Jetzt prüfen`,updateAvailableVersion:`Update verfügbar: v{{version}}`,releaseNotes:`Versionshinweise`,updateViaDocker:`Update über Docker Compose:`,updateViaHomeAssistant:`Updates werden vom Home Assistant Supervisor verwaltet. Öffne Einstellungen → Add-ons → Bambuddy in Home Assistant, um die neue Version zu installieren.`,updateViaWindowsInstaller:`Windows-Installationen werden durch erneutes Ausführen des Installers aktualisiert. Lade die neue Version unten herunter — deine Daten, Einstellungen und Drucker bleiben erhalten.`,downloadWindowsInstaller:`Installer für v{{version}} herunterladen`,installUpdate:`Update installieren`,latestVersionRunning:`Sie verwenden die neueste Version`,failedToCheckUpdates:`Update-Prüfung fehlgeschlagen: {{error}}`,backupRestore:`Sicherung & Wiederherstellung`,backupRestoreDescription:`Einstellungen exportieren/importieren und GitHub-Backup konfigurieren`,goToBackup:`Zur Sicherung`,externalUrl:`Externe URL`,externalUrlDescription:`Die externe URL, unter der Bambuddy erreichbar ist. Wird für Benachrichtigungsbilder und externe Integrationen verwendet.`,bambuddyUrl:`Bambuddy-URL`,externalUrlHint:`Protokoll und Port angeben (z.B. http://192.168.1.100:8000)`,ftpRetry:`FTP-Wiederholung`,ftpRetryDescription:`FTP-Operationen bei unzuverlässigem Drucker-WLAN wiederholen. Gilt für 3MF-Downloads, Druck-Uploads, Zeitraffer-Downloads und Firmware-Updates.`,autoRetryDescription:`Fehlgeschlagene FTP-Operationen automatisch wiederholen`,retryAttempts:`Wiederholungsversuche`,retryDelay:`Wiederholungsverzögerung`,connectionTimeout:`Verbindungs-Timeout`,time_one:`{{count}} Mal`,time_other:`{{count}} Mal`,second_one:`{{count}} Sekunde`,second_other:`{{count}} Sekunden`,nSeconds:`{{count}} Sekunden`,increaseForWeakWifi:`Erhöhen für Drucker mit schwachem WLAN`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`Mit Home Assistant verbinden, um Smart Plugs über die HA REST-API zu steuern. Unterstützt Switch-, Light-, Input_Boolean- und Script-Entitäten.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`Langlebiges Zugriffstoken`,haTokenHint:`Token in HA erstellen: Profil → Langlebige Zugriffstoken → Token erstellen`,connectionSuccessful:`Verbindung erfolgreich`,connectionFailed:`Verbindung fehlgeschlagen`,haConnectionSuccess:`Erfolgreich mit Home Assistant verbunden.`,haConnectionFailed:`Verbindung zu Home Assistant fehlgeschlagen.`,mqttPublishing:`MQTT-Veröffentlichung`,mqttDescription:`BamBuddy-Ereignisse an einen externen MQTT-Broker zur Integration mit Node-RED, Home Assistant und anderen Automatisierungssystemen veröffentlichen.`,mqttEnableDescription:`Ereignisse an externen MQTT-Broker veröffentlichen`,brokerHostname:`Broker-Hostname`,port:`Port`,usernameOptional:`Benutzername (optional)`,passwordOptional:`Passwort (optional)`,topicPrefix:`Topic-Präfix`,topicPrefixHint:`Topics werden sein: {{prefix}}/printers//status, etc.`,prometheusMetrics:`Prometheus-Metriken`,prometheusEndpointDescription:`Druckermetriken unter /api/v1/metrics für Prometheus/Grafana-Überwachung bereitstellen.`,bearerTokenOptional:`Bearer-Token (optional)`,bearerTokenHint:`Wenn gesetzt, müssen Anfragen Authorization: Bearer enthalten`,metricsConnectionStatus:`Verbindungsstatus`,metricsPrinterState:`Druckerstatus (idle/printing/etc)`,metricsPrintProgress:`Druckfortschritt 0-100%`,metricsBedTemp:`Betttemperatur`,metricsNozzleTemp:`Düsentemperatur`,metricsPrintsTotal:`Gesamtdrucke nach Ergebnis`,metricsMore:`...und mehr (Schichten, Lüfter, Warteschlange, Filamentverbrauch)`,smartPlugsDescription:`Smart Plugs (Tasmota oder Home Assistant) verbinden, um Stromsteuerung zu automatisieren und Energieverbrauch für Ihre Drucker zu verfolgen.`,allOn:`Alle Ein`,allOff:`Alle Aus`,addSmartPlug:`Smart Plug hinzufügen`,energySummary:`Energieübersicht`,currentPower:`Aktuelle Leistung`,plugsOnline:`{{reachable}}/{{total}} Plugs online`,today:`Heute`,yesterday:`Gestern`,total:`Gesamt`,enablePlugsForSummary:`Plugs aktivieren, um Energieübersicht zu sehen`,addNotificationProvider:`Hinzufügen`,systemBadge:`(System)`,creating:`Erstellen...`,changing:`Ändern...`,deleteUserAndItems:`Benutzer UND dessen Elemente löschen`,deleteUserKeepItems:`Benutzer löschen, Elemente behalten (werden herrenlos)`,ok:`OK`,twoFa:{totpTitle:`Authenticator-App (TOTP)`,totpDesc:`Verwende eine Authenticator-App wie Google Authenticator, Aegis oder Authy.`,emailOtpTitle:`E-Mail OTP`,emailOtpDesc:`Sende einen Einmalcode an {{email}} beim Einloggen.`,emailOtpNoEmail:`Füge eine E-Mail-Adresse zu deinem Konto hinzu, um diese Methode zu aktivieren.`,addEmailFirst:`Dein Konto hat keine E-Mail-Adresse. Bitte einen Administrator, eine hinzuzufügen.`,setupTotp:`Authenticator-App einrichten`,setupAuthApp:`Authenticator-App einrichten`,setupInstructions:`Scanne den QR-Code mit deiner Authenticator-App und bestätige mit einem Code.`,manualEntry:`Kein Scanner? Gib dieses Secret manuell ein:`,scannedContinue:`Code gescannt — weiter`,enterCodeToConfirm:`Gib den 6-stelligen Code aus deiner Authenticator-App ein, um die Einrichtung zu bestätigen.`,activate:`Aktivieren`,disableTotp:`Authenticator deaktivieren`,disableConfirmHint:`Gib einen gültigen TOTP-Code oder einen Backup-Code ein, um den Authenticator zu deaktivieren.`,totpDisabled:`Authenticator-App deaktiviert.`,emailOtpEnabled:`E-Mail OTP aktiviert.`,emailOtpDisabled:`E-Mail OTP deaktiviert.`,smtpRequired:`Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen.`,invalidCode:`Ungültiger Code. Bitte erneut versuchen.`,enableEmailOtp:`E-Mail OTP aktivieren`,disableEmailOtp:`E-Mail OTP deaktivieren`,emailSetupEnterCode:`Ein Bestätigungscode wurde an Ihre E-Mail-Adresse gesendet. Geben Sie ihn unten ein, um zu bestätigen, dass Ihnen dieses Postfach gehört.`,verifyAndEnable:`Verifizieren & Aktivieren`,emailDisablePasswordHint:`Geben Sie Ihr Kontopasswort ein, um die Deaktivierung des E-Mail OTP zu bestätigen.`,passwordPlaceholder:`Passwort eingeben`,backupCodesTitle:`Backup-Codes sichern`,backupCodesWarning:`Speichere diese Codes sicher. Jeder Code kann nur einmal verwendet werden und wird nicht erneut angezeigt.`,backupCodesRemaining:`{{count}} Backup-Codes verbleibend`,savedCodes:`Codes gespeichert`,regenBackup:`Backup-Codes neu generieren`,regenBackupHint:`Gib deinen aktuellen TOTP-Code ein, um 10 neue Backup-Codes zu generieren. Alle bestehenden Codes werden ungültig.`,newBackupCodes:`Neue Backup-Codes`,linkedAccounts:`Verknüpfte SSO-Konten`,linkedAccountsDesc:`Diese externen Identitätsanbieter sind mit deinem Konto verknüpft.`,oidcUnlinked:`Konto getrennt.`},sessionPolicy:{title:`Sitzungsrichtlinie`,description:`Maximale Sitzungsdauer für neue Benutzeranmeldungen. Bereits ausgegebene Token behalten ihren ursprünglichen Ablauf.`,preset24h:`24 Stunden`,preset7d:`7 Tage`,preset30d:`30 Tage`,customHoursLabel:`Individuelle Sitzungsdauer in Stunden`,hoursSuffix:`Stunden`,warning:`Längere Sitzungen reduzieren den automatischen Abmeldeschutz. Nur für vertrauenswürdige Einzelnutzer-Installationen empfohlen.`},oidc:{title:`SSO / OIDC-Anbieter`,desc:`Konfiguriere OpenID Connect-Anbieter für Single Sign-On.`,addProvider:`Anbieter hinzufügen`,newProvider:`Neuer Anbieter`,empty:`Noch keine OIDC-Anbieter konfiguriert.`,created:`Anbieter erstellt.`,updated:`Anbieter aktualisiert.`,deleted:`Anbieter gelöscht.`,refreshIcon:`Icon neu laden`,removeIcon:`Icon entfernen`,iconRefreshed:`Icon aktualisiert.`,iconRemoved:`Icon entfernt.`,iconFetchFailed:`Icon konnte von der Anbieter-URL nicht geladen werden.`,deleteTitle:`Anbieter löschen`,deleteMessage:`"{{name}}" löschen? Alle verknüpften Benutzerkonten werden getrennt.`,form:{name:`Anzeigename`,issuerUrl:`Aussteller-URL`,clientId:`Client-ID`,clientSecret:`Client-Secret`,scopes:`Bereiche`,iconUrl:`Symbol-URL (optional)`,enabled:`Aktiviert`,autoCreate:`Benutzer automatisch anlegen`,autoCreateDesc:`Erstellt beim ersten Login automatisch ein lokales Konto.`,autoLink:`Bestehende Konten automatisch verknüpfen`,autoLinkDesc:`Verknüpft beim ersten Login vorhandene lokale Konten anhand der E-Mail-Adresse.`,secretHint:`leer lassen zum Beibehalten`,secretPlaceholder:`neues Secret`,emailClaim:`E-Mail-Claim`,emailClaimDesc:`JWT-Claim für die E-Mail-Identität. Für Azure Entra ID 'preferred_username' oder 'upn' verwenden (sendet kein email_verified). Nur vertrauenswürdige Claim-Namen verwenden.`,emailClaimPlaceholder:`E-Mail`,emailClaimCustomClaimAutoLinkWarning:`Benutzerdefinierte Claims sind für die Auto-Verknüpfung nur sicher, wenn der Wert vom Mandanten verwaltet wird (z. B. Azure Entra ID upn / preferred_username). Aktiviere Auto-Verknüpfung nicht, wenn dein IdP Benutzern erlaubt, diesen Claim selbst zu setzen.`,requireEmailVerified:`E-Mail-Verifizierung erforderlich`,requireEmailVerifiedDesc:`E-Mail-Claim nur akzeptieren, wenn der Provider ihn als verifiziert markiert.`,requireEmailVerifiedWarning:`Warnung: E-Mail wird auch ohne Verifizierung akzeptiert. Nur bei vertrauenswürdigen Providern verwenden.`,requireEmailVerifiedAutoLink:`Auto-Verknüpfung zuerst deaktivieren, um diese Einstellung zu ändern.`,defaultGroup:`Standardgruppe`,defaultGroupDesc:`Gruppe, der automatisch erstellte Benutzer zugewiesen werden. Fallback auf Viewers, wenn nicht gesetzt.`,defaultGroupViewersFallback:`Viewers (Standard)`}},encryption:{title:`MFA-Verschlüsselungsstatus`,enabledFromEnv:`At-Rest-Verschlüsselung aktiv (Schlüssel aus Umgebungsvariable MFA_ENCRYPTION_KEY)`,enabledFromFile:`At-Rest-Verschlüsselung aktiv (Schlüssel aus dem Datenverzeichnis geladen)`,enabledGenerated:`At-Rest-Verschlüsselung aktiv mit automatisch generiertem Schlüssel`,notConfigured:`At-Rest-Verschlüsselung nicht konfiguriert`,notConfiguredDesc:`TOTP-Geheimnisse und OIDC-Client-Secrets werden im Klartext gespeichert. Setze MFA_ENCRYPTION_KEY oder starte Bambuddy mit beschreibbarem Datenverzeichnis neu, damit ein Schlüssel automatisch erzeugt wird.`,allEncrypted:`Alle MFA-Geheimnisse sind verschlüsselt gespeichert.`,legacyRowsLabel:`Klartext-Zeilen (Altbestand)`,encryptedRowsLabel:`Verschlüsselte Zeilen`,legacyRowsWarning:`{{count}} Klartext-Zeile(n) erkannt. Den OIDC-Provider neu speichern oder den Authenticator des Benutzers neu einrichten, um die Daten verschlüsselt abzulegen.`,backupHint:`Der automatisch erzeugte Schlüssel liegt unter DATA_DIR/.mfa_encryption_key und wird in lokalen Backup-ZIPs mitgesichert. Backups sicher aufbewahren oder MFA_ENCRYPTION_KEY explizit setzen.`,decryptionBrokenTitle:`Verschlüsselungsschlüssel fehlt`,decryptionBrokenError:`{{count}} verschlüsselte Datensätze können nicht entschlüsselt werden, weil der Schlüssel nicht mehr verfügbar ist. Den vorherigen MFA_ENCRYPTION_KEY oder DATA_DIR/.mfa_encryption_key wiederherstellen.`,migrationErrorWarning:`{{count}} Legacy-Eintrag/Einträge konnten beim Start nicht verschlüsselt werden. Prüfen Sie die Server-Logs und starten Sie Bambuddy neu.`}},notification:{printStarted:{title:`Druck gestartet`,body:`{{printer}}: {{filename}} wird gedruckt`},printCompleted:{title:`Druck abgeschlossen`,body:`{{printer}}: {{filename}} erfolgreich abgeschlossen`},printFailed:{title:`Druck fehlgeschlagen`,body:`{{printer}}: {{filename}} ist fehlgeschlagen`},printStopped:{title:`Druck gestoppt`,body:`{{printer}}: {{filename}} wurde gestoppt`},printProgress:{title:`Druckfortschritt`,body:`{{printer}}: {{filename}} ist zu {{percent}}% abgeschlossen`},printerOffline:{title:`Drucker offline`,body:`{{printer}} ist offline`},printerError:{title:`Druckerfehler`,body:`{{printer}} – {{error}}`},filamentLow:{title:`Filament niedrig`,body:`{{printer}}: Filament geht zur Neige`},maintenanceDue:{title:`Wartung fällig`,body:`{{printer}}: {{items}} benötigen Aufmerksamkeit`}},errors:{generic:`Etwas ist schiefgelaufen`,networkError:`Netzwerkfehler. Bitte überprüfen Sie Ihre Verbindung.`,notFound:`Nicht gefunden`,unauthorized:`Nicht autorisiert`,serverError:`Serverfehler`,validationError:`Bitte überprüfen Sie Ihre Eingabe`,printerConnectionFailed:`Verbindung zum Drucker fehlgeschlagen`,saveFailed:`Speichern fehlgeschlagen`,deleteFailed:`Löschen fehlgeschlagen`,loadFailed:`Laden der Daten fehlgeschlagen`},hmsErrors:{title:`Fehler - {{name}}`,noErrors:`Keine Fehler`,viewOnWiki:`Im Bambu Lab Wiki ansehen`,clearInstructions:`Löschen Sie die Fehler am Drucker, um sie hier zu entfernen.`,clearErrors:`Fehler löschen`,clearSuccess:`HMS-Fehler gelöscht`,clearFailed:`HMS-Fehler konnten nicht gelöscht werden`},mqttDebug:{title:`MQTT-Debug-Protokoll`,searchPlaceholder:`Topic oder Payload suchen...`,noMessages:`Noch keine Nachrichten protokolliert`,startLoggingHint:`Klicken Sie auf "Protokollierung starten", um MQTT-Nachrichten aufzuzeichnen`,noMessagesMatch:`Keine Nachrichten entsprechen Ihrem Filter`,adjustFilterHint:`Versuchen Sie, Ihre Such- oder Filterkriterien anzupassen`,incoming:`Eingehend`,outgoing:`Ausgehend`,loggingStopped:`Protokollierung gestoppt`,loggingActive:`Protokollierung aktiv - Nachrichten werden automatisch aktualisiert`,startLogging:`Protokollierung starten`,stopLogging:`Protokollierung stoppen`,clearLog:`Protokoll löschen`,topic:`Thema`,timestamp:`Zeitstempel`,direction:`Richtung`,all:`Alle`},printerFiles:{title:`Dateimanager`,storageUsed:`Belegt:`,storageFree:`Frei:`,filterPlaceholder:`Dateien filtern...`,deleteButton:`Löschen`,deleteFiles:`{{count}} Dateien löschen`,deleteFileConfirm:`"{{name}}" löschen? Dies kann nicht rückgängig gemacht werden.`,deleteFilesConfirm:`{{count}} ausgewählte Dateien löschen? Dies kann nicht rückgängig gemacht werden.`,noFiles:`Keine Dateien auf dem Drucker`,loadingFiles:`Dateien werden geladen...`,failedToLoad:`Dateien konnten nicht geladen werden`,toast:{filesDeleted:`{{count}} Datei(en) gelöscht`,deleteFailed:`Löschen fehlgeschlagen: {{error}}`}},confirm:{delete:`Möchten Sie dies wirklich löschen?`,unsavedChanges:`Sie haben ungespeicherte Änderungen. Möchten Sie wirklich verlassen?`,clearQueue:`Möchten Sie die Warteschlange wirklich leeren?`},login:{title:`Bambuddy Anmeldung`,subtitle:`Melden Sie sich bei Ihrem Konto an`,username:`Benutzername`,usernamePlaceholder:`Benutzername eingeben`,usernameOrEmail:`Benutzername oder E-Mail`,usernameOrEmailPlaceholder:`Benutzername oder @ E-Mail`,password:`Passwort`,passwordPlaceholder:`Passwort eingeben`,signIn:`Anmelden`,signingIn:`Anmeldung läuft...`,rememberMe:`Angemeldet bleiben`,forgotPassword:`Passwort vergessen?`,loginSuccess:`Erfolgreich angemeldet`,loginFailed:`Anmeldung fehlgeschlagen`,enterCredentials:`Bitte Benutzername und Passwort eingeben`,enterEmail:`Bitte geben Sie Ihre E-Mail-Adresse ein`,oidcLoginFailed:`OIDC-Anmeldung fehlgeschlagen`,oidcErrors:{providerError:`Der Identity-Provider hat einen Fehler zurückgegeben`,missingParameters:`Dem OIDC-Callback fehlen erforderliche Parameter`,invalidState:`OIDC-State ist ungültig oder wurde bereits verwendet`,stateExpired:`OIDC-Sitzung abgelaufen — bitte erneut versuchen`,providerNotFound:`OIDC-Provider nicht gefunden`,discoveryFailed:`OIDC-Discovery-Dokument konnte nicht abgerufen werden`,invalidDiscovery:`OIDC-Discovery-Dokument ist ungültig`,networkError:`Netzwerkfehler beim OIDC-Token-Austausch`,badResponse:`Unerwartete Antwort beim OIDC-Token-Austausch`,noIdToken:`OIDC-Provider hat kein ID-Token zurückgegeben`,validationFailed:`OIDC-Token-Validierung fehlgeschlagen`,nonceMismatch:`OIDC-Nonce stimmt nicht überein — möglicher Replay-Angriff`,missingSubClaim:`OIDC-Token enthält keinen Sub-Claim`,noLinkedAccount:`Kein lokales Konto mit dieser OIDC-Identität verknüpft`,accountInactive:`Ihr Konto ist inaktiv`,userResolutionFailed:`Ihr Konto konnte nicht aufgelöst werden`,internalError:`Interner Fehler beim OIDC-Login`,tokenExchangeFailed:`OIDC-Token-Austausch fehlgeschlagen`},forgotPasswordTitle:`Passwort vergessen`,forgotPasswordMessage:`Wenn Sie Ihr Passwort vergessen haben, wenden Sie sich bitte an Ihren Systemadministrator.`,forgotPasswordEmailMessage:`Geben Sie Ihre E-Mail-Adresse ein und wir senden Ihnen ein neues Passwort.`,emailAddress:`E-Mail-Adresse`,emailPlaceholder:`ihre.email@beispiel.de`,cancel:`Abbrechen`,sending:`Wird gesendet...`,sendResetEmail:`Zurücksetzungs-E-Mail senden`,howToReset:`So setzen Sie Ihr Passwort zurück:`,resetStep1:`Kontaktieren Sie Ihren Bambuddy-Administrator`,resetStep2:`Bitten Sie ihn, Ihr Passwort in der Benutzerverwaltung zurückzusetzen`,resetStep3:`Er kann ein neues temporäres Passwort für Sie festlegen`,resetStep4:`Melden Sie sich mit dem neuen Passwort an und ändern Sie es in den Einstellungen`,gotIt:`Verstanden`,resetPassword:{title:`Neues Passwort festlegen`,subtitle:`Geben Sie unten Ihr neues Passwort ein und bestätigen Sie es.`,newPassword:`Neues Passwort`,newPasswordPlaceholder:`Mindestens 8 Zeichen`,confirmPassword:`Passwort bestätigen`,confirmPasswordPlaceholder:`Neues Passwort wiederholen`,saving:`Wird gespeichert…`,submit:`Neues Passwort festlegen`,backToLogin:`Zurück zur Anmeldung`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 8 Zeichen lang sein`,resetFailed:`Passwort zurücksetzen fehlgeschlagen. Der Link ist möglicherweise abgelaufen.`},twoFA:{title:`Zwei-Faktor-Authentifizierung`,subtitle:`Ihr Konto ist mit 2FA geschützt. Geben Sie unten den Bestätigungscode ein.`,methodAuthenticator:`Authenticator-App`,methodEmail:`E-Mail-Code`,methodBackup:`Wiederherstellungscode`,instructionsTotp:`Öffnen Sie Ihre Authenticator-App und geben Sie den 6-stelligen Code für Bambuddy ein.`,instructionsEmail:`Ein 6-stelliger Code wurde an Ihre E-Mail-Adresse gesendet. Er ist 10 Minuten gültig.`,instructionsEmailNotSent:`Klicken Sie unten, um einen Bestätigungscode per E-Mail zu erhalten.`,instructionsBackup:`Geben Sie einen Ihrer 8-stelligen Wiederherstellungscodes ein. Jeder Code kann nur einmal verwendet werden.`,sendCodeButton:`Code per E-Mail senden`,sendingCode:`Wird gesendet...`,resendCode:`Code erneut senden`,codeLabel:`Bestätigungscode`,backupCodeLabel:`Wiederherstellungscode`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Bestätigen`,verifyingButton:`Wird überprüft...`,backToLogin:`← Zurück zur Anmeldung`,orContinueWith:`oder anmelden mit`,signInWith:`Anmelden mit {{provider}}`,enterCode:`Bitte geben Sie den Bestätigungscode ein`,sendCodeFailed:`Bestätigungscode konnte nicht gesendet werden`,invalidCode:`Ungültiger Code. Bitte erneut versuchen.`}},setup:{title:`Bambuddy Einrichtung`,subtitle:`Konfigurieren Sie die Authentifizierung für Ihre Bambuddy-Instanz`,enableAuth:`Authentifizierung aktivieren`,adminAccount:`Admin-Konto`,adminAccountDesc:`Wenn bereits Admin-Benutzer existieren, wird die Authentifizierung mit den vorhandenen Admin-Konten aktiviert. Lassen Sie die Felder unten leer, um vorhandene Admins zu verwenden, oder geben Sie neue Anmeldedaten ein, um einen neuen Admin-Benutzer zu erstellen.`,adminUsername:`Admin-Benutzername`,adminPassword:`Admin-Passwort`,optionalIfAdminExists:`(optional, wenn Admin-Benutzer existieren)`,adminUsernamePlaceholder:`Admin-Benutzernamen eingeben (optional)`,adminPasswordPlaceholder:`Admin-Passwort eingeben (optional)`,confirmPassword:`Passwort bestätigen`,confirmPasswordPlaceholder:`Admin-Passwort bestätigen`,settingUp:`Einrichtung läuft...`,completeSetup:`Einrichtung abschließen`,toast:{authEnabledAdminCreated:`Authentifizierung aktiviert und Admin-Benutzer erstellt`,authEnabledExistingAdmins:`Authentifizierung mit vorhandenen Admin-Benutzern aktiviert`,setupCompleted:`Einrichtung abgeschlossen`,enterBothCredentials:`Bitte geben Sie sowohl Admin-Benutzernamen als auch Passwort ein, oder lassen Sie beide leer, um vorhandene Admin-Benutzer zu verwenden`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 6 Zeichen lang sein`}},changePassword:{title:`Passwort ändern`,currentPassword:`Aktuelles Passwort`,currentPasswordPlaceholder:`Aktuelles Passwort eingeben`,newPassword:`Neues Passwort`,newPasswordPlaceholder:`Neues Passwort eingeben (min. 6 Zeichen)`,confirmPassword:`Neues Passwort bestätigen`,confirmPasswordPlaceholder:`Neues Passwort bestätigen`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 6 Zeichen lang sein`,changing:`Wird geändert...`,success:`Passwort erfolgreich geändert`,failed:`Passwortänderung fehlgeschlagen`},plateAlert:{title:`Druck pausiert!`,message:`Objekte auf dem Druckbett erkannt. Der Druck wurde automatisch pausiert. Bitte räumen Sie das Druckbett und setzen Sie den Druck fort.`,understand:`Verstanden`},camera:{title:`Kameraansicht`,invalidPrinterId:`Ungültige Drucker-ID`,live:`Live`,snapshot:`Schnappschuss`,restartStream:`Stream neu starten`,refreshSnapshot:`Schnappschuss aktualisieren`,fullscreen:`Vollbild`,exitFullscreen:`Vollbild beenden`,connectingToCamera:`Verbinde mit Kamera...`,capturingSnapshot:`Schnappschuss wird aufgenommen...`,connectionLost:`Verbindung verloren`,connectionFailed:`Kameraverbindung fehlgeschlagen`,reconnecting:`Neuverbindung in {{countdown}}s... (Versuch {{attempt}}/{{max}})`,reconnectNow:`Jetzt verbinden`,cameraUnavailable:`Kamera nicht verfügbar`,cameraUnavailableDesc:`Stellen Sie sicher, dass der Drucker eingeschaltet und verbunden ist.`,noCamera:`Keine Kamera verfügbar`,retry:`Erneut versuchen`,cameraStream:`Kamera-Stream`,zoomOut:`Verkleinern`,zoomIn:`Vergrößern`,resetZoom:`Zoom zurücksetzen`,recording:`Aufnahme`,startRecording:`Aufnahme starten`,stopRecording:`Aufnahme stoppen`,chamberLight:`Kammerbeleuchtung umschalten`,unavailable:`Kamera nicht verfügbar`,diagnose:{button:`Diagnose`,modalTitle:`Kamera-Diagnose`,running:`Diagnose läuft...`,runFailed:`Diagnose konnte nicht ausgeführt werden: {{error}}`,retry:`Erneut ausführen`,stage:{tcp_reachable:`Netzwerk-Erreichbarkeit`,first_frame:`Bilderfassung`,live_stream_active:`Live-Stream aktiv`},summary:{all_ok:`Kamera funktioniert. Die Diagnose hat alle Phasen erfolgreich abgeschlossen.`,live_stream_active_healthy:`Kamera streamt gerade mit aktuellen Bildern — kein Test nötig.`,printer_unreachable:`Drucker ist nicht erreichbar. Prüfe IP-Adresse, Netzwerkverbindung und ob der Drucker eingeschaltet ist.`,camera_port_closed:`Drucker ist erreichbar, aber der Kamera-Port ist geschlossen. Stelle sicher, dass LAN-Modus und Entwicklermodus in den Druckereinstellungen aktiviert sind.`,no_frame:`Verbindung zur Kamera hergestellt, aber keine Bilder empfangen. Versuche es erneut oder prüfe, ob die Kamera in den Druckereinstellungen aktiviert ist.`,unknown_failure:`Kamera-Diagnose aus unbekanntem Grund fehlgeschlagen. Prüfe das Support-Log für Details.`},meta:{protocol:`Protokoll`,port:`Port`,profile:`Profil`}}},groups:{title:`Gruppenverwaltung`,subtitle:`Berechtigungsgruppen für Zugriffskontrolle verwalten`,backToSettings:`Zurück zu Einstellungen`,createGroup:`Gruppe erstellen`,noPermission:`Sie haben keine Berechtigung, auf diese Seite zuzugreifen.`,system:`System`,noDescription:`Keine Beschreibung`,usersCount:`{{count}} Benutzer`,permissionsCount:`{{count}} Berechtigungen`,edit:`Bearbeiten`,delete:`Löschen`,toast:{created:`Gruppe erfolgreich erstellt`,updated:`Gruppe erfolgreich aktualisiert`,deleted:`Gruppe erfolgreich gelöscht`,enterGroupName:`Bitte geben Sie einen Gruppennamen ein`},modal:{editGroup:`Gruppe bearbeiten`,createGroup:`Gruppe erstellen`,cancel:`Abbrechen`,saving:`Speichern...`,creating:`Erstellen...`,saveChanges:`Änderungen speichern`},form:{groupName:`Gruppenname`,groupNamePlaceholder:`Gruppennamen eingeben`,systemGroupWarning:`Systemgruppennamen können nicht geändert werden`,description:`Beschreibung`,descriptionPlaceholder:`Beschreibung eingeben (optional)`,permissions:`Berechtigungen ({{count}} ausgewählt)`},deleteModal:{title:`Gruppe löschen`,message:`Sind Sie sicher, dass Sie diese Gruppe löschen möchten? Benutzer in dieser Gruppe verlieren diese Berechtigungen.`,confirm:`Gruppe löschen`},editor:{title:`Gruppe bearbeiten`,createTitle:`Gruppe erstellen`,search:`Berechtigungen suchen...`,selectAll:`Alle auswählen`,clearAll:`Alle abwählen`,permissionsSelected:`{{count}} ausgewählt`,noResults:`Keine Berechtigungen entsprechen Ihrer Suche`}},users:{title:`Benutzerverwaltung`,subtitle:`Benutzer und deren Zugriff auf Ihre Bambuddy-Instanz verwalten`,backToSettings:`Zurück zu Einstellungen`,createUser:`Benutzer erstellen`,noPermission:`Sie haben keine Berechtigung, auf diese Seite zuzugreifen.`,admin:`Admin`,noGroups:`Keine Gruppen`,active:`Aktiv`,inactive:`Inaktiv`,edit:`Bearbeiten`,delete:`Löschen`,system:`System`,noGroupsAvailable:`Keine Gruppen verfügbar`,table:{username:`Benutzername`,groups:`Gruppen`,status:`Status`,actions:`Aktionen`},toast:{created:`Benutzer erfolgreich erstellt`,updated:`Benutzer erfolgreich aktualisiert`,deleted:`Benutzer erfolgreich gelöscht`,fillRequired:`Bitte füllen Sie alle Pflichtfelder aus`,passwordsDoNotMatch:`Passwörter stimmen nicht überein`,passwordTooShort:`Passwort muss mindestens 6 Zeichen lang sein`,ldapProvisioned:`LDAP-Benutzer „{{username}}" bereitgestellt`},modal:{createUser:`Benutzer erstellen`,editUser:`Benutzer bearbeiten`,cancel:`Abbrechen`,creating:`Erstellen...`,saving:`Speichern...`,saveChanges:`Änderungen speichern`,advancedAuthSubtitle:`mit erweiterter Authentifizierung`,tabsAriaLabel:`Benutzerquelle`,localTab:`Lokal`,ldapTab:`LDAP`,ldapSearchLabel:`Verzeichnis durchsuchen`,ldapSearchPlaceholder:`Benutzername, Name oder E-Mail eingeben...`,ldapMinChars:`Mindestens 2 Zeichen für die Suche eingeben`,ldapTypeToSearch:`Tippen, um das LDAP-Verzeichnis zu durchsuchen`,ldapSearching:`Verzeichnis wird durchsucht...`,ldapNoResults:`Keine passenden Benutzer im Verzeichnis`,ldapSearchError:`Verzeichnissuche fehlgeschlagen. Bitte LDAP-Server-Status prüfen.`,ldapAlreadyProvisioned:`Bereits bereitgestellt`,ldapSelectedLabel:`Ausgewählt`,ldapProvision:`Benutzer bereitstellen`,ldapProvisioning:`Wird bereitgestellt...`,ldapErrorProvision:`Bereitstellung fehlgeschlagen. Bitte LDAP-Server-Status prüfen und erneut versuchen.`},form:{username:`Benutzername`,usernamePlaceholder:`Benutzernamen eingeben`,email:`E-Mail`,emailPlaceholder:`benutzer@beispiel.de`,password:`Passwort`,passwordPlaceholder:`Passwort eingeben`,confirmPassword:`Passwort bestätigen`,confirmPasswordPlaceholder:`Passwort bestätigen`,newPasswordPlaceholder:`Neues Passwort eingeben`,confirmNewPasswordPlaceholder:`Neues Passwort bestätigen`,leaveBlankToKeep:`leer lassen, um das aktuelle zu behalten`,groups:`Gruppen`,optional:`optional`,autoGeneratedPassword:`Ein sicheres Passwort wird automatisch generiert und per E-Mail an den Benutzer gesendet.`,passwordManagedByAdvancedAuth:`Das Passwort wird durch erweiterte Authentifizierung verwaltet. Verwenden Sie "Passwort zurücksetzen", um ein neues Passwort per E-Mail an den Benutzer zu senden.`,resetPassword:`Passwort zurücksetzen`,resettingPassword:`Passwort wird zurückgesetzt...`},deleteModal:{title:`Benutzer löschen`,message:`Sind Sie sicher, dass Sie diesen Benutzer löschen möchten? Diese Aktion kann nicht rückgängig gemacht werden.`,confirm:`Benutzer löschen`}},streamOverlay:{title:`Stream-Overlay`,invalidPrinterId:`Ungültige Drucker-ID`,cameraStream:`Kamera-Stream`,progress:`Fortschritt`,eta:`ETA`,printerIdle:`Drucker ist inaktiv`,printerOffline:`Drucker offline`,status:{printing:`Druckt`,paused:`Pausiert`,finished:`Fertig`,failed:`Fehlgeschlagen`,idle:`Inaktiv`,unknown:`Unbekannt`}},profiles:{title:`Profile`,subtitle:`Verwalten Sie Ihre Slicer-Voreinstellungen und Druckvorschub-Kalibrierungen`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Lokale Profile`,kprofiles:`K-Profile`},orcaCloud:{connectedAs:`Verbunden als`,logout:`Trennen`,noLogoutPermission:`Sie haben keine Berechtigung zum Trennen`,noConnectPermission:`Sie haben keine Berechtigung, sich mit Orca Cloud zu verbinden`,retry:`Erneut versuchen`,back:`Andere Anmeldemethode verwenden`,connect:{title:`Mit Orca Cloud verbinden`,description:`Melden Sie sich bei Ihrem Orca Cloud-Konto an, um Ihre Slicer-Profile in Bambuddy zu synchronisieren.`},providers:{google:`Mit Google anmelden`,apple:`Mit Apple anmelden`,github:`Mit GitHub anmelden`,email:`Mit E-Mail und Passwort anmelden`},password:{title:`Mit E-Mail und Passwort anmelden`,email:`E-Mail`,emailPlaceholder:`sie@beispiel.de`,password:`Passwort`,submit:`Anmelden`},paste:{title:`Anmeldung abschließen`,step1:`Ein neuer Tab wurde mit der Orca Cloud-Anmeldeseite geöffnet. Melden Sie sich mit Ihrem Orca-Konto an.`,step2:`Ihr Browser wird zu einer "localhost"-URL umgeleitet, die nicht geladen werden kann. Das ist normal — die URL ist es, was wir brauchen.`,step3:`Kopieren Sie die gesamte URL aus der Adressleiste Ihres Browsers und fügen Sie sie unten ein.`,signInUrl:`Falls sich der Anmelde-Tab nicht geöffnet hat, klicken Sie auf diese URL:`,label:`Callback-URL hier einfügen`,placeholder:`http://localhost:41172/callback?code=...&state=...`,submit:`Verbindung abschließen`},profiles:{title:`Ihre Orca Cloud-Profile ({{count}})`,refresh:`Aktualisieren`,empty:`Noch keine Profile in Ihrem Orca Cloud-Konto gefunden.`},toast:{connected:`Mit Orca Cloud verbunden als {{email}}`,disconnected:`Verbindung zu Orca Cloud getrennt`},errors:{startFailed:`Anmeldevorgang für Orca Cloud konnte nicht gestartet werden.`,finishFailed:`Orca Cloud-Anmeldung konnte nicht abgeschlossen werden.`,passwordFailed:`Anmeldung mit dieser E-Mail und diesem Passwort fehlgeschlagen.`,passwordEmpty:`Bitte geben Sie sowohl E-Mail als auch Passwort ein.`,emptyPaste:`Bitte fügen Sie die Callback-URL aus Ihrem Browser ein.`,noCode:`Diese URL sieht nicht wie ein Orca Cloud-Callback aus (kein code-Parameter). Kopieren Sie die vollständige URL aus der Adressleiste.`}},localProfiles:{title:`Lokale Profile`,subtitle:`Slicer-Voreinstellungen aus OrcaSlicer importieren und verwalten`,import:`Profile importieren`,importDesc:`.bbscfg-, .bbsflmt-, .orca_filament-, .zip- oder .json-Dateien hier ablegen`,importing:`Importiere...`,search:`Lokale Voreinstellungen durchsuchen...`,noPresets:`Noch keine lokalen Voreinstellungen`,noSearchResults:`Keine Voreinstellungen entsprechen deiner Suche`,badge:`Lokal`,edit:`Bearbeiten`,delete:`Löschen`,cancel:`Abbrechen`,deleteConfirmTitle:`Voreinstellung löschen`,deleteConfirm:`Möchten Sie diese Voreinstellung wirklich löschen? Dies kann nicht rückgängig gemacht werden.`,source:`Quelle`,inheritsFrom:`Erbt von`,filamentType:`Typ`,vendor:`Hersteller`,compatiblePrinters:`Drucker`,nozzleTemp:`Düsentemperatur`,cost:`Kosten`,density:`Dichte`,pressureAdvance:`Druckvorschub`,filament:`Filament`,process:`Prozess`,printer:`Drucker`,toast:{importSuccess:`{{count}} Voreinstellung(en) importiert`,importSkipped:`{{count}} Voreinstellung(en) übersprungen (Duplikate)`,importError:`{{count}} Fehler beim Import`,deleted:`Voreinstellung gelöscht`,updated:`Voreinstellung aktualisiert`}},connectedAs:`Verbunden als`,logout:`Abmelden`,noLogoutPermission:`Sie haben keine Berechtigung zum Abmelden`,failedToLoad:`Profile konnten nicht geladen werden`,retry:`Erneut versuchen`,time:{justNow:`Gerade eben`,minsAgo:`vor {{count}}m`,hoursAgo:`vor {{count}}h`,daysAgo:`vor {{count}}d`},toast:{loggedOut:`Abgemeldet`},login:{title:`Mit Bambu Cloud verbinden`,subtitle:`Synchronisieren Sie Ihre Slicer-Voreinstellungen geräteübergreifend`,email:`E-Mail`,password:`Passwort`,region:`Region`,regionGlobal:`Global`,regionChina:`China`,verificationCode:`Bestätigungscode`,totpCode:`Authenticator-Code`,checkEmail:`Prüfen Sie Ihre E-Mail ({{email}}) für einen 6-stelligen Code`,enterTotpHint:`Geben Sie den 6-stelligen Code aus Ihrer Authenticator-App ein`,accessToken:`Zugriffstoken`,accessTokenHint:`Fügen Sie Ihr Bambu-Cloud-Zugriffstoken ein. Konten der Region China müssen diesen Weg nutzen (telefonnummerngebunden — kein E-Mail-Login). Im Wiki steht, wie Sie das Token aus den MakerWorld-Cookies auslesen.`,back:`Zurück`,loginButton:`Anmelden`,verifyButton:`Bestätigen`,setTokenButton:`Token setzen`,useToken:`Stattdessen Zugriffstoken verwenden`,useEmail:`Stattdessen mit E-Mail anmelden`,toast:{loggedIn:`Erfolgreich angemeldet`,codeSent:`Bestätigungscode an Ihre E-Mail gesendet`,enterTotp:`Geben Sie den Code aus Ihrer Authenticator-App ein`,tokenSet:`Token erfolgreich gesetzt`}},presets:{myPreset:`Mein Profil (bearbeitbar)`,duplicate:`Duplizieren`,editable:`Bearbeitbar`,failedToLoadDetails:`Profil-Details konnten nicht geladen werden`,deleteConfirm:`Dieses Profil löschen?`,deleteWarning:`"{{name}}" wird dauerhaft aus Bambu Cloud gelöscht. Dies kann nicht rückgängig gemacht werden.`,noDuplicatePermission:`Sie haben keine Berechtigung zum Duplizieren von Profilen`,noEditPermission:`Sie haben keine Berechtigung zum Bearbeiten von Profilen`,noDeletePermission:`Sie haben keine Berechtigung zum Löschen von Profilen`,types:{filament:`Filament-Profil`,printer:`Drucker-Profil`,process:`Prozess-Profil`},toast:{deleted:`Profil gelöscht`,created:`Profil erstellt`,updated:`Profil aktualisiert`,duplicated:`Profil dupliziert`,fieldAdded:`Feld "{{key}}" hinzugefügt`,exported:`Profil exportiert`},baseLabel:`Basis: {{name}}`,currentLabel:`Aktuell: {{name}}`,newPreset:`Neues Profil`,editPreset:`Profil bearbeiten`,duplicatePreset:`Profil duplizieren`,createNewPreset:`Neues Profil erstellen`,customizeSettings:`Passen Sie die Einstellungen für Ihr neues Profil an`,compareWithBase:`Mit Basis-Profil vergleichen`,compare:`Vergleichen`,basePreset:`Basis-Profil`,selectBasePreset:`Basis-Profil auswählen...`,presetName:`Profilname`,myCustomPreset:`Mein eigenes Profil`,inheritsFrom:`Erbt von`,dropJsonToImport:`JSON zum Importieren ablegen`,tabs:{common:`Allgemein`,allFields:`Alle Felder`},availableFields:`Verfügbare Felder`,searchFieldsPlaceholder:`Felder suchen...`,noMatchingFields:`Keine passenden Felder`,allFieldsAdded:`Alle Felder hinzugefügt`,addCustomField:`Eigenes Feld hinzufügen`,yourOverrides:`Ihre Überschreibungen`,noOverridesYet:`Noch keine Überschreibungen`,clickFieldsToAdd:`Klicken Sie links auf Felder, um sie hinzuzufügen`,saveAsTemplate:`Als Vorlage speichern`,jsonTip:`Tipp: Ziehen Sie eine .json-Datei auf dieses Fenster, um Einstellungen zu importieren`},cloudView:{searchPlaceholder:`Profile suchen...`,templates:`Vorlagen`,refresh:`Aktualisieren`,newPreset:`Neues Profil`,clearFilters:`Filter zurücksetzen`,compareMode:`Vergleichsmodus`,selectAnotherPreset:`Wählen Sie ein weiteres {{type}}-Profil`,clickTwoPresets:`Klicken Sie auf zwei Profile des gleichen Typs zum Vergleichen`,selectFirst:`1. Erstes auswählen`,selectSecond:`2. Zweites auswählen`,compareNow:`Jetzt vergleichen`,lastSynced:`Zuletzt synchronisiert:`,showingCount:`{{showing}} von {{total}} Profilen`,noPresetsFound:`Keine Profile gefunden`,columns:{filament:`Filament`,process:`Prozess`,printer:`Drucker`},noFilamentPresets:`Keine Filament-Profile`,noProcessPresets:`Keine Prozess-Profile`,noPrinterPresets:`Keine Drucker-Profile`,filters:{type:`Typ`,owner:`Besitzer`,printer:`Drucker`,nozzle:`Düse`,filament:`Filament`,layer:`Schicht`,all:`Alle`,myPresets:`Meine Profile`,builtIn:`Voreingestellt`,process:`Prozess`},noTemplatesPermission:`Sie haben keine Berechtigung, Vorlagen zu verwalten`,noRefreshPermission:`Sie haben keine Berechtigung, Profile zu aktualisieren`,noCreatePermission:`Sie haben keine Berechtigung, Profile zu erstellen`},templates:{title:`Schnellvorlagen`,noTemplates:`Noch keine Vorlagen`,createFirst:`Erstellen Sie Vorlagen aus dem Preset-Editor`,typeFilter:`Typ:`,deleteTitle:`Vorlage löschen`,deleteWarning:`Diese Aktion kann nicht rückgängig gemacht werden`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,namePlaceholder:`Vorlagenname`,descriptionPlaceholder:`Beschreibung`,settingsJson:`Einstellungen (JSON)`,fieldsCount:`{{count}} Felder`,shownInModals:`In Dialogen angezeigt`,hiddenInModals:`In Dialogen ausgeblendet`,apply:`Anwenden`,toast:{deleted:`Vorlage gelöscht`,updated:`Vorlage aktualisiert`,created:`Vorlage erstellt`,applied:`Vorlage angewendet`}}},support:{debugLoggingActive:`Debug-Protokollierung ist aktiv`,manageLogs:`Verwalten`,collectItem7:`Drucker-Verbindungsstatus und Firmware-Versionen`,collectItem8:`Integrationsstatus (Spoolman, MQTT, HA)`,collectItem9:`Netzwerkschnittstellen (nur Subnetze)`,collectItem10:`Python-Paketversionen`,collectItem11:`Datenbankzustandsprüfungen`,collectItem12:`Docker-Umgebungsdetails`,bundleGenerating:`Bundle wird erstellt...`,bundleStepConnection:`Drucker-Verbindungsprüfungen werden ausgeführt`,bundleStepVirtualPrinters:`Setup-Prüfungen für virtuelle Drucker werden ausgeführt`,bundleStepLogScan:`Aktuelle Protokolle werden auf bekannte Probleme überprüft`,bundleStepBuild:`Support-Bundle-ZIP wird erstellt`},fileManager:{title:`Dateimanager`,subtitle:`Organisieren und verwalten Sie Ihre Druckdateien`,uploadFiles:`Dateien hochladen`,newFolder:`Neuer Ordner`,folderName:`Ordnername`,folderNamePlaceholder:`z.B. Funktionsteile`,renameFile:`Datei umbenennen`,renameFolder:`Ordner umbenennen`,invalidFilenameChar:`Das Zeichen "{{char}}" ist in Druck-Dateinamen nicht erlaubt. Die SD-Karte des Druckers lehnt folgende Zeichen ab: < > : " / \\ | ? *`,moveFiles:`{{count}} Datei(en) verschieben`,rootNoFolder:`Stammverzeichnis (Kein Ordner)`,current:`aktuell`,linkFolder:`Ordner verknüpfen`,linkFolderDescription:`"{{name}}" mit einem Projekt oder Archiv verknüpfen für schnellen Zugriff.`,project:`Projekt`,archive:`Archiv`,noProjectsFound:`Keine Projekte gefunden`,noArchivesFound:`Keine Archive gefunden`,unlink:`Verknüpfung aufheben`,link:`Verknüpfen`,dragDropFiles:`Dateien hierher ziehen`,dropFilesHere:`Dateien hier ablegen`,releaseToUpload:`Loslassen zum Hochladen`,orClickToBrowse:`oder klicken zum Durchsuchen`,allFileTypesSupported:`Alle Dateitypen werden unterstützt. ZIP-Dateien werden extrahiert.`,zipFilesDetected:`ZIP-Dateien erkannt`,zipExtractOptions:`ZIP-Dateien werden extrahiert. Wählen Sie, wie die Ordnerstruktur behandelt werden soll:`,preserveZipStructure:`Ordnerstruktur aus ZIP beibehalten`,createFolderFromZip:`Ordner aus ZIP-Dateiname erstellen`,stlThumbnailGeneration:`STL-Vorschaubildgenerierung`,zipMayContainStl:`ZIP-Dateien können STL-Dateien enthalten. Vorschaubilder können während der Extraktion generiert werden.`,thumbnailsCanBeGenerated:`Vorschaubilder können für STL-Dateien generiert werden. Große Modelle benötigen möglicherweise mehr Zeit.`,generateThumbnailsForStl:`Vorschaubilder für STL-Dateien generieren`,threemfDetected:`3MF-Dateien erkannt`,threemfExtractionInfo:`Druckermodell, Material, Farbe und Druckeinstellungen werden automatisch aus 3MF-Dateien extrahiert.`,willBeExtracted:`Wird extrahiert`,filesExtracted:`{{count}} Dateien extrahiert`,uploadComplete:`Upload abgeschlossen: {{succeeded}} erfolgreich`,uploadFailed:`Hochladen fehlgeschlagen`,zipFilesFailed:`{{count}} Dateien fehlgeschlagen`,uploading:`Hochladen...`,changeLink:`Verknüpfung ändern...`,linkTo:`Verknüpfen mit...`,linkToProjectOrArchive:`Mit Projekt oder Archiv verknüpfen`,addToQueue:`Zur Warteschlange`,schedulePrint:`Planen`,generateThumbnail:`Vorschaubild generieren`,generateThumbnails:`Vorschaubilder generieren`,generateThumbnailsForMissing:`Vorschaubilder für STL-Dateien ohne Vorschau generieren`,gridView:`Rasteransicht`,listView:`Listenansicht`,lowDiskSpaceWarning:`Warnung: Wenig Speicherplatz`,lowDiskSpaceDetails:`Nur {{free}} frei von {{total}} gesamt. Schwellenwert ist auf {{threshold}} GB eingestellt.`,files:`Dateien`,folders:`Ordner`,size:`Größe`,free:`Frei`,allFiles:`Alle Dateien`,allExternal:`Extern`,externalIsEmpty:`Keine externen Dateien`,externalEmptyDescription:`Dateien aus deinen verknüpften externen Ordnern erscheinen hier.`,wrap:`Umbrechen`,enableTextWrapping:`Textumbruch aktivieren`,disableTextWrapping:`Textumbruch deaktivieren`,collapse:`Einklappen`,collapseFoldersByDefault:`Ordner standardmäßig einklappen`,expandFoldersByDefault:`Ordner standardmäßig ausklappen`,folderSort:`Ordner sortieren`,folderSortByName:`Nach Name`,folderSortByActivity:`Nach letzter Aktivität`,dragToResizeTooltip:`Ziehen zum Ändern der Größe, Doppelklick zum Zurücksetzen`,searchFiles:`Dateien suchen...`,searchSubfoldersHint:`Inklusive Unterordner`,readme:{truncated:`Gekürzt`},tags:{title:`Tags`,subtitle:`Dateien mit Labels versehen — Spielzeug, kindersicher, nur PETG, was immer du willst.`,manage:`Tags`,manageTitle:`Tag-Katalog verwalten`,add:`Neuer Tag`,edit:`Tag umbenennen`,name:`Name`,fileCount:`Dateien`,empty:`Noch keine Tags. Erstelle einen, um Dateien zu kennzeichnen.`,noMatches:`Keine passenden Tags.`,createPlaceholder:`z. B. Spielzeug, kindersicher, petg`,createButton:`Erstellen`,nameRequired:`Name ist erforderlich.`,searchPlaceholder:`Tags filtern...`,created:`Tag erstellt.`,updated:`Tag umbenannt.`,deleted:`Tag entfernt.`,saveFailed:`Tag konnte nicht gespeichert werden.`,deleteFailed:`Tag konnte nicht entfernt werden.`,applyFailed:`Tags konnten nicht angewendet werden.`,applyAdd:`Tags hinzufügen`,applyRemove:`Tags entfernen`,applyAddSuccess:`{{count}} Tag(s) zu {{files}} Datei(en) hinzugefügt.`,applyRemoveSuccess:`{{count}} Tag(s) von {{files}} Datei(en) entfernt.`,actionAdd:`Zu ausgewählten Dateien hinzufügen`,actionRemove:`Von ausgewählten Dateien entfernen`,tagAction:`Tag`,bulkTitle:`{{count}} ausgewählte Datei(en) taggen`,bulkTooltip:`Tags für alle ausgewählten Dateien hinzufügen oder entfernen.`,noPermission:`Du hast keine Berechtigung, Dateien zu taggen.`,filterLabel:`Filtern nach:`,clearAll:`Alle entfernen`,confirmDelete:`Tag "{{name}}" löschen?`,confirmDeleteMessage:`Entfernt den Tag aus dem Katalog. Dateien behalten ihre übrigen Tags.`,confirmDeleteInUseMessage:`Dieser Tag ist auf {{count}} Datei(en). Beim Löschen verschwindet er von allen; die Dateien selbst bleiben unverändert.`,editAria:`{{name}} bearbeiten`,deleteAria:`{{name}} löschen`},allTypes:`Alle Typen`,prints:`Drucke`,ascending:`Aufsteigend`,descending:`Absteigend`,resultsCount:`{{showing}} von {{total}} Dateien`,selectAll:`Alle auswählen`,deselectAll:`Auswahl aufheben`,selected:`{{count}} ausgewählt`,adding:`Hinzufügen...`,loadingFiles:`Dateien werden geladen...`,folderIsEmpty:`Ordner ist leer`,noFilesYet:`Noch keine Dateien`,folderEmptyDescription:`Laden Sie Dateien hoch oder verschieben Sie Dateien in diesen Ordner.`,noFilesDescription:`Laden Sie Dateien hoch, um Ihre Druckdateien zu organisieren.`,noMatchingFiles:`Keine passenden Dateien`,noMatchingFilesDescription:`Keine Dateien entsprechen Ihren aktuellen Such- oder Filterkriterien.`,clearFilters:`Filter zurücksetzen`,printedCount:`{{count}}x gedruckt`,uploadedBy:`Hochgeladen von`,deleteFolder:`Ordner löschen`,deleteFile:`Datei löschen`,deleteFilesCount:`{{count}} Dateien löschen`,deleteFolderConfirm:`Möchten Sie diesen Ordner wirklich löschen? Alle Dateien darin werden ebenfalls gelöscht.`,deleteFileConfirm:`Möchten Sie diese Datei wirklich löschen?`,deleteFilesConfirm:`Möchten Sie {{count}} ausgewählte Dateien wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.`,deleting:`Wird gelöscht...`,noPermissionRenameFolder:`Sie haben keine Berechtigung, Ordner umzubenennen`,noPermissionLinkFolder:`Sie haben keine Berechtigung, Ordner zu verknüpfen`,noPermissionDeleteFolder:`Sie haben keine Berechtigung, Ordner zu löschen`,noPermissionPrint:`Sie haben keine Berechtigung zum Drucken`,noPermissionSlice:`Sie haben keine Berechtigung, Dateien zu slicen`,noPermissionAddToQueue:`Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen`,noPermissionDownload:`Sie haben keine Berechtigung, Dateien herunterzuladen`,noPermissionRenameFile:`Sie haben keine Berechtigung, diese Datei umzubenennen`,noPermissionGenerateThumbnail:`Sie haben keine Berechtigung, Vorschaubilder zu generieren`,noPermissionDeleteFile:`Sie haben keine Berechtigung, diese Datei zu löschen`,noPermissionCreateFolder:`Sie haben keine Berechtigung, Ordner zu erstellen`,noPermissionUpload:`Sie haben keine Berechtigung, Dateien hochzuladen`,noPermissionMoveFiles:`Sie haben keine Berechtigung, Dateien zu verschieben`,noPermissionDeleteFiles:`Sie haben keine Berechtigung, Dateien zu löschen`,linkExternal:`Extern verknüpfen`,linkExternalFolder:`Externen Ordner verknüpfen`,linkExternalFolderDescription:`Ein Host-Verzeichnis (NAS, USB, Netzlaufwerk) in den Dateimanager einbinden. Dateien werden nicht kopiert — sie werden direkt vom Originalpfad gelesen.`,externalFolderNamePlaceholder:`z.B. NAS-Drucke`,externalPath:`Host-Pfad`,externalPathHelp:`Absoluter Pfad zum Verzeichnis auf dem Docker-Host. Muss als Bind-Mount in den Container eingebunden sein.`,readOnly:`Nur Lesen`,readOnlyHelp:`verhindert Uploads und Löschungen`,showHiddenFiles:`Versteckte Dateien anzeigen (Punkt-Dateien)`,externalFolder:`Externer Ordner`,scanFolder:`Scannen`,toast:{folderCreated:`Ordner erstellt`,folderDeleted:`Ordner gelöscht`,fileDeleted:`Datei gelöscht`,filesDeleted:`{{count}} Dateien gelöscht`,filesMoved:`Dateien verschoben`,folderLinked:`Ordner verknüpft`,folderUnlinked:`Ordnerverknüpfung aufgehoben`,externalFolderLinked:`Externer Ordner verknüpft und gescannt`,folderScanned:`Scan abgeschlossen: {{added}} hinzugefügt, {{removed}} entfernt`,addedToQueue:`{{count}} Datei(en) zur Warteschlange hinzugefügt`,addedToQueuePartial:`{{added}} Datei(en) hinzugefügt, {{failed}} fehlgeschlagen`,failedToAddToQueue:`Fehler beim Hinzufügen: {{error}}`,fileRenamed:`Datei umbenannt`,folderRenamed:`Ordner umbenannt`,thumbnailsGenerated:`{{count}} Vorschaubild(er) generiert`,thumbnailsGeneratedPartial:`{{succeeded}} Vorschaubild(er) generiert, {{failed}} fehlgeschlagen`,noStlMissingThumbnails:`Keine STL-Dateien ohne Vorschaubild`,failedToGenerateThumbnails:`Fehler beim Generieren der Vorschaubilder: {{error}}`,thumbnailGenerated:`Vorschaubild generiert`,failedToGenerateThumbnail:`Fehler beim Generieren des Vorschaubildes: {{error}}`}},projects:{title:`Projekte`,subtitle:`Organisieren und verfolgen Sie Ihre 3D-Druckprojekte`,newProject:`Neues Projekt`,editProject:`Projekt bearbeiten`,deleteProject:`Projekt löschen`,projectName:`Projektname`,description:`Beschreibung`,noProjects:`Noch keine Projekte`,noProjectsFiltered:`Keine {{status}} Projekte`,noProjectsFilteredHelp:`Sie haben keine {{status}} Projekte. Projekte werden hier angezeigt, wenn sich ihr Status ändert.`,createFirst:`Erstellen Sie Ihr erstes Projekt, um verwandte Drucke zu organisieren, den Fortschritt zu verfolgen und Ihre Builds zu verwalten.`,createFirstButton:`Erstes Projekt erstellen`,create:`Erstellen`,files:`Dateien`,prints:`Drucke`,plates:`Platten`,parts:`Teile`,lastModified:`Zuletzt geändert`,deleteConfirm:`Möchten Sie dieses Projekt wirklich löschen? Archive und Warteschlangenelemente werden getrennt, aber nicht gelöscht.`,addFiles:`Dateien hinzufügen`,removeFile:`Datei entfernen`,viewDetails:`Details anzeigen`,namePlaceholder:`z.B. Voron 2.4 Build`,descriptionPlaceholder:`Optionale Beschreibung...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL muss mit http:// oder https:// beginnen`,openExternalUrl:`Projekt-URL öffnen`,coverImageLabel:`Titelbild`,coverImageAlt:`Projekt-Titelbild`,coverImageUpload:`Hochladen`,coverImageReplace:`Ersetzen`,coverImageRemove:`Entfernen`,color:`Farbe`,targetPlates:`Ziel-Platten`,targetPlatesPlaceholder:`z.B. 25`,targetPlatesHelp:`Anzahl der Druckaufträge`,targetParts:`Ziel-Teile`,targetPartsPlaceholder:`z.B. 150`,targetPartsHelp:`Benötigte Objekte insgesamt`,tagsLabel:`Tags (kommagetrennt)`,tagsPlaceholder:`z.B. voron, funktional, geschenk`,dueDate:`Fälligkeitsdatum`,priority:`Priorität`,priorityLow:`Niedrig`,priorityNormal:`Normal`,priorityHigh:`Hoch`,priorityUrgent:`Dringend`,statusActive:`Aktiv`,statusCompleted:`Abgeschlossen`,statusArchived:`Archiviert`,done:`Fertig`,completed:`abgeschlossen`,failed:`fehlgeschlagen`,inQueue:`in Warteschlange`,noPrintsYet:`Noch keine Drucke`,printJobs:`Druckaufträge (Platten)`,partsPrinted:`Gedruckte Teile`,failedParts:`Fehlgeschlagene Teile`,import:`Importieren`,export:`Exportieren`,importProject:`Projekt importieren`,exportAll:`Alle Projekte exportieren`,loading:`Projekte werden geladen...`,noEditPermission:`Sie haben keine Berechtigung, Projekte zu bearbeiten`,noDeletePermission:`Sie haben keine Berechtigung, Projekte zu löschen`,noCreatePermission:`Sie haben keine Berechtigung, Projekte zu erstellen`,noImportPermission:`Sie haben keine Berechtigung, Projekte zu importieren`,noExportPermission:`Sie haben keine Berechtigung, Projekte zu exportieren`,toast:{created:`Projekt erstellt`,updated:`Projekt aktualisiert`,deleted:`Projekt gelöscht`,imported:`Projekt importiert`,multipleImported:`{{count}} Projekte importiert`,importFailed:`Import fehlgeschlagen`,exported:`Projekte exportiert (nur Metadaten)`}},projectDetail:{notFound:`Projekt nicht gefunden`,backToProjects:`Zurück zu Projekten`,export:`Exportieren`,exportProject:`Projekt exportieren`,noExportPermission:`Sie haben keine Berechtigung, Projekte zu exportieren`,noEditPermission:`Sie haben keine Berechtigung, Projekte zu bearbeiten`,partOf:`Teil von:`,priorityLabel:`Priorität:`,noPrints:`Noch keine Drucke in diesem Projekt`,status:{active:`Aktiv`,completed:`Abgeschlossen`,archived:`Archiviert`},priority:{low:`Niedrig`,normal:`Normal`,high:`Hoch`,urgent:`Dringend`},dueDate:{overdue:`Überfällig`,today:`Heute fällig`,daysLeft:`{{count}} Tage übrig`},progress:{platesProgress:`Platten-Fortschritt`,partsProgress:`Teile-Fortschritt`,printJobs:`Druckaufträge`,parts:`Teile`,percentComplete:`{{percent}}% abgeschlossen`,remaining:`{{count}} verbleibend`},stats:{printJobs:`Druckaufträge`,total:`gesamt`,failed:`{{count}} fehlgeschlagen`,partsPrinted:`{{count}} Teile gedruckt`,printTime:`Druckzeit`,filamentUsed:`Filament verbraucht`},cost:{title:`Kostenverfolgung`,filamentCost:`Filamentkosten`,energy:`Energie`,totalCost:`Gesamtkosten`,total:`Gesamt`,includesBom:`inkl. Stückliste`,budget:`Budget`,remaining:`Verbleibend`},subProjects:{title:`Unterprojekte ({{count}})`},notes:{title:`Notizen`,noEditPermission:`Sie haben keine Berechtigung, Notizen zu bearbeiten`,placeholder:`Notizen zu diesem Projekt hinzufügen...`,empty:`Noch keine Notizen. Klicken Sie auf Bearbeiten, um Notizen hinzuzufügen.`},files:{title:`Dateien`,linkFolders:`Ordner aus dem Dateimanager verknüpfen`,forQuickAccess:`für schnellen Zugriff auf dieses Projekt.`,fileCount:`{{count}} Datei(en)`,empty:`Keine Ordner verknüpft. Gehen Sie zum Dateimanager und verknüpfen Sie einen Ordner mit diesem Projekt.`,noFiles:`Keine Dateien in diesem Ordner.`,print:`Jetzt drucken`,addToQueue:`Zur Warteschlange`},bom:{title:`Stückliste`,acquired:`{{completed}}/{{total}} beschafft`,showAll:`Alle anzeigen`,hideDone:`Erledigte ausblenden`,addPart:`Teil hinzufügen`,noAddPermission:`Sie haben keine Berechtigung, Teile hinzuzufügen`,partNamePlaceholder:`Teilename (z.B. M3x8 Schrauben)`,partName:`Teilename`,qty:`Menge`,price:`Preis ({{currency}})`,sourcingUrlPlaceholder:`Bezugsquelle-URL (optional)`,remarksPlaceholder:`Bemerkungen (optional)`,deletePart:`Teil löschen`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen?`,noUpdatePermission:`Sie haben keine Berechtigung, Teile zu aktualisieren`,noEditPermission:`Sie haben keine Berechtigung, Teile zu bearbeiten`,noDeletePermission:`Sie haben keine Berechtigung, Teile zu löschen`,totalCost:`Gesamtkosten:`,empty:`Keine Teile in der Stückliste. Fügen Sie Hardware, Elektronik oder andere Komponenten hinzu, um zu verfolgen, was beschafft werden muss.`},timeline:{title:`Aktivitätsverlauf`,empty:`Noch keine Aktivität.`},template:{saveAsTemplate:`Als Vorlage speichern`,noCreatePermission:`Sie haben keine Berechtigung, Vorlagen zu erstellen`},queue:{title:`Warteschlange`,viewAll:`Alle anzeigen`,printing:`{{count}} druckend`,queued:`{{count}} in Warteschlange`},prints:{title:`Drucke ({{count}})`},toast:{projectUpdated:`Projekt aktualisiert`,partAdded:`Teil hinzugefügt`,partRemoved:`Teil entfernt`,exportFailed:`Export fehlgeschlagen`,projectExported:`Projekt exportiert`,templateCreated:`Vorlage erstellt`}},system:{title:`Systeminformationen`,version:`Version`,uptime:`Laufzeit`,cpuUsage:`CPU-Auslastung`,memoryUsage:`Speicherauslastung`,diskUsage:`Festplattenauslastung`,networkInfo:`Netzwerkinformationen`,logs:`Protokolle`,debugMode:`Debug-Modus`,enableDebug:`Debug-Protokollierung aktivieren`,disableDebug:`Debug-Protokollierung deaktivieren`,downloadLogs:`Protokolle herunterladen`,clearLogs:`Protokolle löschen`,dockerInfo:`Docker-Info`,containerName:`Container-Name`,imageName:`Image-Name`,platform:`Plattform`,architecture:`Architektur`},sponsors:{sectionTitle:`Unabhängig & von der Community finanziert`,tagline:`Bambuddy ist kostenlos und bleibt es, weil Menschen es freiwillig unterstützen. Kein VC, kein Cloud-Zwang.`,viewSupporters:`Unterstützer ansehen`,toastPrints:`Du hast {{count}} Drucke mit Bambuddy abgeschlossen. Bambuddy bleibt kostenlos dank seiner Unterstützer.`,toastCost:`Du hast {{total}} an Filament mit Bambuddy verfolgt. Sieh dir an, wer das Projekt unabhängig hält.`,toastArchives:`{{count}} Drucke mit Bambuddy archiviert. Sieh dir an, wer es unabhängig hält.`,toastAnniversary:`Ein Jahr mit Bambuddy! Sieh dir an, wer das Projekt unabhängig hält.`,toastVersionUpdate:`Aktualisiert auf v{{version}}. Bambuddy bleibt kostenlos dank seiner Unterstützer.`},library:{title:`Filament-Bibliothek`,addFilament:`Filament hinzufügen`,editFilament:`Filament bearbeiten`,deleteFilament:`Filament löschen`,vendor:`Hersteller`,material:`Material`,color:`Farbe`,kFactor:`K-Faktor`,temperature:`Temperatur`,noFilaments:`Keine Filamente in der Bibliothek`,deleteConfirm:`Möchten Sie dieses Filament wirklich löschen?`,importFromPrinter:`Vom Drucker importieren`,exportToFile:`In Datei exportieren`},slice:{title:`Modell slicen`,action:`Slicen`,actionAll:`Alle {{count}} Plates slicen`,actionAllTitle:`Alle Plates in eine einzelne Multi-Plate-Ausgabe slicen (ein Archiv). Die Filamentauswahl gilt für jeden Slot des Projekts.`,allPlatesToggle:`Alle {{count}} Plates slicen`,slicing:`Slicen…`,printer:`Drucker-Profil`,process:`Prozess-Profil`,filament:`Filament-Profil`,filamentSlot:`Filament {{index}} – {{type}}`,selectPreset:`— Profil auswählen —`,loadingPresets:`Profile werden geladen…`,analyzingPlateFilaments:`Plattenfilamente werden analysiert…`,analyzingPlateFilamentsHint:`Es wird ein Probeschnitt ausgeführt, um die belegten AMS-Slots dieser Platte zu ermitteln. Wird zwischengespeichert — erneutes Öffnen ist sofort.`,previewToast:`{{name}} wird analysiert — {{elapsed}}`,previewWithProgress:`{{name}} wird analysiert — {{stage}} ({{percent}}%) — {{elapsed}}`,notUsedByPlate:`— wird von dieser Platte nicht verwendet`,noPresetsForSlot:`Keine Profile verfügbar`,otherPrinters:`Andere Drucker`,presetsLoadFailed:`Profile konnten nicht geladen werden. Importiere sie zuerst unter Einstellungen → Profile.`,refreshPresets:`Aktualisieren`,refreshPresetsTitle:`Profile neu laden — die aktuellen Cloud- und Bundle-Listen abrufen (nach dem Löschen eines Profils in Bambu Studio oder Bambu Handy verwenden)`,allPresetsRequired:`Alle Profile müssen ausgewählt sein`,enqueuing:`Slice-Auftrag wird übermittelt…`,queued:`In Warteschlange…`,failed:`Slicen fehlgeschlagen. Logs des Slicer-Sidecars prüfen.`,startedToast:`{{name}} wird im Hintergrund gesliced…`,queuedToast:`Warteschlange: {{name}} — {{elapsed}}`,runningToast:`{{name}} wird gesliced — {{elapsed}}`,runningWithProgress:`{{name}} – {{stage}} ({{percent}} %) – {{elapsed}}`,runningWithProgressMultiPlate:`Plate {{plateIndex}} von {{plateCount}} • {{name}} – {{stage}} ({{percent}} %) – {{elapsed}}`,completedToast:`{{name}} wurde gesliced`,failedTitle:`Slicen fehlgeschlagen`,failedToast:`Slicen von {{name}} fehlgeschlagen: {{detail}}`,tier:{local:`Importiert`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standard`},cloud:{notAuthenticated:`In Bambu Cloud anmelden (Einstellungen → Profile → Bambu Cloud), um deine Cloud-Profile zu sehen.`,expired:`Bambu-Cloud-Sitzung abgelaufen — erneut anmelden, um die Cloud-Profile zu aktualisieren.`,unreachable:`Bambu Cloud ist gerade nicht erreichbar. Lokale und Standard-Profile funktionieren weiterhin.`},orcaCloud:{notAuthenticated:`Bei Orca Cloud anmelden (Profile → Orca Cloud), um Ihre Orca-Profile zu sehen.`,expired:`Orca Cloud-Sitzung abgelaufen — erneut anmelden, um die Orca-Profile zu aktualisieren.`,unreachable:`Orca Cloud ist derzeit nicht erreichbar. Andere Profile funktionieren weiterhin.`},bedType:{label:`Druckbett`,auto:`Auto (aus Prozess-Profil)`,coolPlate:`Cool Plate`,coolPlateSuperTack:`Cool Plate SuperTack`,engineering:`Engineering Plate`,highTemp:`High Temp Plate`,texturedPEI:`Textured PEI Plate`,smoothPEI:`Smooth PEI Plate`}},spoolman:{title:`Spoolman-Integration`,enabled:`Spoolman aktiviert`,url:`Spoolman URL`,connected:`Verbunden`,disconnected:`Nicht verbunden`,testConnection:`Verbindung testen`,sync:`Synchronisieren`,syncing:`Synchronisiert...`,lastSync:`Letzte Synchronisierung`,linkToSpoolman:`Mit Spoolman verknüpfen`,openInSpoolman:`In Spoolman öffnen`,unlinkSpool:`Spule trennen`,unlinkConfirmTitle:`Spule entfernen?`,unlinkConfirmMessage:`Die Spule wird vom Slot entfernt. Die Spulendaten selbst bleiben unverändert.`,selectSpool:`Spule auswählen`,noUnlinkedSpools:`Keine nicht zugewiesenen Spulen verfügbar`,linkSuccess:`Spule erfolgreich zugewiesen`,linkFailed:`Spule konnte nicht zugewiesen werden`,unlinkSuccess:`Spule erfolgreich entfernt`,unlinkFailed:`Spule konnte nicht entfernt werden`,linkedSpool:`Zugewiesene Spule`,spoolId:`Spulen-ID`,fillSourceLabel:`(Spoolman)`,weight:`Gewicht`,remaining:`Verbleibend`,disableWeightSync:`AMS-Gewichtsschätzung deaktivieren`,disableWeightSyncDesc:`Verbleibende Kapazität nicht aus AMS-Schätzungen aktualisieren. Verwenden Sie dies, wenn Sie die Verbrauchserfassung von Spoolman gegenüber den prozentualen AMS-Schätzungen bevorzugen. Neue Spulen verwenden weiterhin die AMS-Schätzung als Anfangsgewicht.`,reportPartialUsage:`Teilverbrauch bei fehlgeschlagenen Drucken melden`,reportPartialUsageDesc:`Wenn ein Druck fehlschlägt oder abgebrochen wird, den geschätzten Filamentverbrauch bis zu diesem Zeitpunkt basierend auf dem Schichtfortschritt melden.`},locations:{title:`Lagerorte`,subtitle:`Regale, Schubladen und andere physische Lagerplätze für Spulen verwalten`,add:`Lagerort hinzufügen`,addShort:`Hinzufügen`,edit:`Lagerort bearbeiten`,name:`Name`,spools:`Spulen`,empty:`Noch keine Lagerorte. Erstellen Sie Ihr erstes Regal oder Ihre erste Schublade.`,manage:`Lagerorte`,createPlaceholder:`z. B. Regal A, Schublade 1`,nameRequired:`Name des Lagerorts ist erforderlich`,created:`Lagerort erstellt`,updated:`Lagerort aktualisiert`,deleted:`Lagerort gelöscht`,saveFailed:`Lagerort konnte nicht gespeichert werden`,deleteFailed:`Lagerort konnte nicht gelöscht werden`,deleteBlocked:`Entfernen Sie zuerst alle Spulen von diesem Lagerort`,confirmDelete:`„{{name}}“ löschen?`,confirmDeleteMessage:`Dieser Lagerort wird aus dem Katalog entfernt. Spulen müssen zuerst verschoben werden.`},inventory:{title:`Spulen-Inventar`,subtitle:`Verwalten Sie Ihre Spulen`,spoolmanMixedContentTitle:`Spoolman lässt sich nicht über HTTPS laden — Browser blockiert gemischte Inhalte`,spoolmanMixedContentBody:`Bambuddy wird über HTTPS ausgeliefert (über deinen Reverse-Proxy), aber deine Spoolman-URL ist nach wie vor HTTP. Browser blockieren gemischte Inhalte aus Sicherheitsgründen, daher kann die eingebettete Spoolman-Oberfläche nicht geladen werden. Spoolman muss ebenfalls über HTTPS erreichbar sein.`,spoolmanMixedContentFixReverseProxy:`Stelle Spoolman hinter denselben Reverse-Proxy wie Bambuddy (Traefik / Nginx / Caddy) mit HTTPS und aktualisiere die Spoolman-URL in den Einstellungen auf die neue HTTPS-Adresse.`,spoolmanMixedContentFixOpenNewTab:`Als Workaround kannst du Spoolman in einem neuen Tab über HTTP öffnen — gemischte Inhalte werden nur innerhalb eingebetteter Frames blockiert, ein eigener Tab funktioniert weiterhin.`,spoolmanOpenInNewTab:`Spoolman in neuem Tab öffnen`,labels:{title:`Spulen-Etiketten drucken`,selectedCount:`{{count}} ausgewählt`,pickSpools:`Wählen Sie, für welche Spulen Etiketten gedruckt werden sollen:`,searchPlaceholder:`Name, Marke oder #ID suchen`,filterByMaterial:`Material:`,allMaterials:`Alle`,selectVisible:`Alle sichtbaren auswählen ({{count}})`,deselectVisible:`Sichtbare abwählen`,clearAll:`Alle entfernen`,noSpoolsToShow:`Keine Spulen anzuzeigen. Filter anpassen und erneut versuchen.`,noMatches:`Keine Spulen entsprechen der aktuellen Suche oder dem Filter.`,printOne:`Etikett für diese Spule drucken`,printLabels:`Etiketten drucken…`,bulkTitle:`Spulen aus den aktuell angezeigten {{count}} zum Etikettieren auswählen`,noSpoolsTitle:`Keine Spulen zum Etikettieren`,error:`Etiketten konnten nicht erstellt werden: {{msg}}`,sortBy:{label:`Sortieren:`,id:`Nach ID`,color:`Nach Farbe`},templates:{amsHolderSmall:{label:`AMS-Halter — klein (74 × 33 mm)`,hint:`Ein Etikett pro Seite; passt zum druckbaren Etikett aus dem MakerWorld-Modell 752566 (AMS-Filament-Etikettenhalter).`},amsHolderLarge:{label:`AMS-Halter — groß (75 × 55 mm)`,hint:`Ein Etikett pro Seite; passt zur Kartoneinleger-Variante des AMS-Filament-Etikettenhalters. Genug Platz für Farbprobe, Marke, Material, ID und QR-Code.`},box40x30:{label:`Boxetikett (40 × 30 mm)`,hint:`Ein Etikett pro Seite; gängige DK/Brother-Rollengröße, ideal für Filament-Beutel und Lager-Etiketten.`},box:{label:`Box label (62 × 29 mm)`,hint:`Ein Etikett pro Seite; für Brother PT/QL und Dymo-Kleinetiketten dimensioniert.`},averyL7160:{label:`Avery L7160 — A4 sheet (38.1 × 63.5 mm × 21)`,hint:`EU-Bogenformat; 21 Etiketten pro A4-Seite.`},avery5160:{label:`Avery 5160 — US Letter sheet (25.4 × 66.7 mm × 30)`,hint:`US-Bogenformat; 30 Etiketten pro Letter-Seite.`}}},csv:{importButton:`CSV importieren`,exportButton:`CSV exportieren`,modalTitle:`Spulen aus CSV importieren`,selectFile:`CSV-Datei auswählen oder hierher ziehen`,dragHint:`Kopfzeile: material (erforderlich), brand, subtype, color_name, rgba, …`,parsing:`Datei wird gelesen…`,previewError:`CSV-Datei konnte nicht gelesen werden`,validCount:`{{count}} gültig`,errorCount:`{{count}} Fehler`,skippedCount:`{{count}} übersprungen`,colRow:`Zeile`,colStatus:`Status`,colColor:`Farbe`,colorResolved:`Farbe aus Katalog übernommen`,colorCrossMaterial:`Farbe von einem anderen Material übernommen — keine exakte Übereinstimmung im Katalog`,duplicateExisting:`Eine Spule mit diesem Material, dieser Marke und Farbe existiert bereits — sie wird trotzdem als neue Spule importiert`,spoolmanHint:`Im Spoolman-Modus den integrierten CSV-Import/-Export von Spoolman verwenden.`,importValidRows:`{{count}} gültige Zeilen importieren`,noValidRows:`Keine gültigen Zeilen`,importing:`Wird importiert…`,importSuccess:`{{count}} Spulen importiert`,importError:`Import fehlgeschlagen`,exportError:`Export fehlgeschlagen`},addSpool:`Spule hinzufügen`,copySpool:`Spule kopieren`,editSpool:`Spule bearbeiten`,material:`Material`,selectMaterial:`Material auswählen...`,subtype:`Untertyp`,brand:`Marke`,searchBrand:`Marke suchen...`,useCustomBrand:`"{{brand}}" verwenden`,useCustomMaterial:`Benutzerdefiniertes Material verwenden: {{material}}`,colorName:`Farbname`,colorNamePlaceholder:`Jadeweiß, Feuerrot...`,color:`Farbe`,hexColor:`Hex-Farbe`,pickColor:`Benutzerdefinierte Farbe wählen`,labelWeight:`Nenngewicht`,coreWeight:`Leergewicht der Spule`,searchSpoolWeight:`Spulengewicht suchen...`,weightUsed:`Verbraucht`,currentWeight:`Restgewicht`,measuredWeight:`Gemessenes Gewicht`,spoolName:`Spule`,costPerKg:`Kosten pro kg`,storageLocation:`Lagerstandort`,storageLocationPlaceholder:`z.B. Regal A, Schublade 1`,openInInventory:`Im Inventar öffnen`,measuredWeightError:`Das gemessene Gewicht muss zwischen {{min}}g und {{max}}g liegen.`,slicerFilament:`Slicer-Filament`,slicerFilamentName:`Slicer-Preset-Name`,slicerPreset:`Slicer-Preset`,searchPresets:`Filament-Presets suchen...`,selectedPreset:`Ausgewählt`,noPresetsFound:`Keine Presets gefunden`,tempOverrides:`Temperatur-Überschreibungen`,note:`Notiz`,notePlaceholder:`Zusätzliche Notizen zu dieser Spule...`,category:`Kategorie`,categoryPlaceholder:`z. B. Produktion, Prototyp, Kunde A`,categoryNone:`Ohne Kategorie`,storageLocationNone:`Kein Lagerort`,lowStockThresholdOverride:`Niedrigbestandsschwelle (diese Spule)`,lowStockThresholdOverrideHelp:`Leer lassen, um den globalen Schwellenwert ({{global}}%) zu verwenden.`,clearRfid:`RFID-Tag löschen`,rfidCleared:`RFID-Tag gelöscht`,archive:`Archivieren`,restore:`Wiederherstellen`,noSpools:`Noch keine Spulen. Fügen Sie Ihre erste Spule hinzu.`,noAvailableSpools:`Keine Spulen verfügbar. Fügen Sie eine Spule zum Inventar hinzu oder lösen Sie eine aus einem anderen Slot.`,kProfiles:`K-Profile`,addKProfile:`K-Profil hinzufügen`,assignSpool:`Spule zuweisen`,unassignSpool:`Zuweisung aufheben`,assignSuccess:`Spule zugewiesen und AMS-Slot konfiguriert`,assignPendingInsert:`Zugewiesen. Slot wird beim Einsetzen der Spule konfiguriert.`,assignFailed:`Spulenzuweisung fehlgeschlagen`,selectSpool:`Wählen Sie eine Spule für diesen Slot`,assigned:`Zugewiesen`,assigning:`Wird zugewiesen...`,searchSpools:`Spulen suchen...`,showAllSpools:`Alle Spulen anzeigen`,spoolmanSpools:`Spoolman-Spulen`,allMaterials:`Alle Materialien`,filterByBrand:`Nach Marke filtern...`,showArchived:`Archivierte anzeigen`,quickAdd:`Schnellerfassung (Lager)`,quantity:`Menge`,stock:`Lager`,configured:`Konfiguriert`,spoolsCreated:`{{count}} Spulen erstellt`,spoolsPartiallyCreated:`{{created}} von {{total}} Spulen erstellt (einige fehlgeschlagen)`,spoolCreated:`Spule erstellt`,spoolUpdated:`Spule aktualisiert`,spoolDeleted:`Spule gelöscht`,deepLinkSpoolNotFound:`Spule nicht gefunden`,deepLinkFetchFailed:`Spule konnte nicht geladen werden — bitte erneut versuchen`,spoolArchived:`Spule archiviert`,spoolRestored:`Spule wiederhergestellt`,kProfileSaveFailed:`K-Profil-Einstellungen konnten nicht gespeichert werden`,syncWeightSpoolNotFound:`Spule nicht gefunden — sie wurde möglicherweise gelöscht`,syncWeightSpoolmanUnreachable:`Spoolman ist nicht erreichbar — bitte später erneut versuchen`,syncWeightFailed:`Gewicht konnte nicht synchronisiert werden`,spoolmanUnreachable:`Spoolman ist nicht erreichbar — bitte später erneut versuchen`,deleteSpoolNotFound:`Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht`,deleteFailed:`Spule konnte nicht gelöscht werden`,archiveSpoolNotFound:`Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht`,archiveFailed:`Spule konnte nicht archiviert werden`,restoreSpoolNotFound:`Spule nicht gefunden — sie wurde möglicherweise bereits gelöscht`,restoreFailed:`Spule konnte nicht wiederhergestellt werden`,saveFailed:`Änderungen konnten nicht gespeichert werden`,tagClearFailed:`Tag konnte nicht gelöscht werden`,deleteConfirm:`Möchten Sie diese Spule wirklich löschen? Dies kann nicht rückgängig gemacht werden.`,archiveConfirm:`Möchten Sie diese Spule wirklich archivieren?`,advancedSettings:`Erweiterte Einstellungen`,filamentInfoTab:`Filament-Info`,paProfileTab:`PA-Profil`,filamentInfo:`Filament`,additional:`Zusätzlich`,loadingPresets:`Cloud-Presets werden geladen...`,cloudConnected:`Cloud verbunden`,cloudNotConnected:`Cloud nicht verbunden (Standardwerte)`,recentColors:`Zuletzt`,searchColors:`Farben suchen...`,searchResults:`Suchergebnisse`,allColors:`Alle Farben`,commonColors:`Häufige Farben`,showLess:`Weniger`,showAll:`Alle`,noColorsFound:`Keine Farben gefunden`,noResults:`Keine Ergebnisse`,extraColorsLabel:`Zusätzliche Farben`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`2 bis 8 Hex-Stops, durch Kommas getrennt. Wird als Verlauf dargestellt.`,extraColorsInvalid:`Ungültige Hex-Werte ignoriert: {{tokens}}`,colorEffectLabel:`Effekt`,colorEffect:{none:`Keiner`,sparkle:`Glitzer`,wood:`Holz`,marble:`Marmor`,glow:`Leuchtend`,matte:`Matt`,silk:`Seide`,galaxy:`Galaxie`,rainbow:`Regenbogen`,metal:`Metallic`,translucent:`Lichtdurchlässig`,gradient:`Verlauf`,dualColor:`Zweifarbig`,triColor:`Dreifarbig`,multicolor:`Mehrfarbig`},selectMaterialFirst:`Bitte zuerst ein Material im Filament-Info Tab auswählen.`,noPrintersConfigured:`Keine Drucker konfiguriert. Fügen Sie Drucker hinzu.`,matchingFilter:`Filter`,anyBrand:`Jede Marke`,anyVariant:`Jede Variante`,autoSelect:`Auto-Auswahl`,matches:`Treffer`,match:`Treffer`,noMatches:`Keine Treffer`,connected:`Verbunden`,offline:`Offline`,printerOffline:`Drucker ist offline. Verbinden Sie ihn, um Kalibrierungsprofile anzuzeigen.`,noKProfilesMatch:`Keine K-Profile stimmen mit dem gewählten Filament überein.`,leftNozzle:`Linke Düse`,rightNozzle:`Rechte Düse`,profilesSelected:`Kalibrierungsprofil(e) ausgewählt`,totalInventory:`Gesamtbestand`,totalConsumed:`Gesamtverbrauch`,byMaterial:`Nach Material`,inPrinter:`Im Drucker`,lowStock:`Niedriger Bestand`,sinceTracking:`Seit Beginn der Erfassung`,resetConsumedCounter:`Zähler zurücksetzen`,resetConsumedCounterTooltip:`Den verbrauchten Gramm-Zähler dieser Spule auf null setzen. Das Restgewicht bleibt unverändert.`,resetConsumedCounterConfirm:`Verbrauchten Gramm-Zähler dieser Spule auf 0 zurücksetzen? Künftige Drucke zählen wieder ab null. Die Spule selbst, ihre Restgewichtsberechnung und Ihre Einstellungen bleiben unverändert.`,resetAllConsumedCounters:`Alle Zähler zurücksetzen`,resetAllConsumedCountersTooltip:`Den verbrauchten Gramm-Zähler auf jeder Spule auf null setzen. Die Restgewichte bleiben unverändert.`,resetAllConsumedCountersConfirm:`Verbrauchten Gramm-Zähler auf allen {{count}} Spulen (archivierte eingeschlossen) auf 0 zurücksetzen? Das löscht den Wert „Insgesamt verbraucht“, sodass künftige Drucke wieder ab null gezählt werden. Spulen und Restgewichte bleiben unverändert.`,consumedCounterReset:`Zähler zurückgesetzt`,allConsumedCountersReset:`Zähler für {{count}} Spule(n) zurückgesetzt`,resetConsumedCounterFailed:`Zähler konnte nicht zurückgesetzt werden`,loadedInAms:`Im AMS/Ext geladen`,remaining:`Verbleibend`,weightCheck:`Gewichtskontrolle`,lastWeighed:`Zuletzt gewogen`,neverWeighed:`Nie gewogen`,search:`Spulen suchen...`,showing:`Zeige`,to:`bis`,of:`von`,show:`Zeige`,spools:`Spulen`,spool:`Spule`,page:`Seite`,noSpoolsMatch:`Keine Ergebnisse`,noSpoolsMatchDesc:`Versuchen Sie, Ihre Suche oder Filter anzupassen.`,active:`Aktiv`,archived:`Archiviert`,all:`Alle`,used:`Verwendet`,new:`Neu`,clearFilters:`Filter löschen`,table:`Tabelle`,cards:`Karten`,net:`Netto`,groupSimilar:`Gruppieren`,groupedSpools:`{{count}} identische Spulen`,groupedRows:`Zeilen`,columns:`Spalten`,configureColumns:`Spalten konfigurieren`,configureColumnsDesc:`Ziehen zum Neuordnen oder Pfeile verwenden. Sichtbarkeit mit dem Augensymbol umschalten.`,visible:`sichtbar`,reset:`Zurücksetzen`,cancel:`Abbrechen`,applyChanges:`Änderungen anwenden`,moveUp:`Nach oben`,moveDown:`Nach unten`,hideColumn:`Spalte ausblenden`,showColumn:`Spalte einblenden`,linkToSpool:`Mit Spule verknüpfen`,tagLinked:`Tag mit Spule verknüpft`,tagLinkFailed:`Tag-Verknüpfung fehlgeschlagen`,tagAlreadyLinked:`Tag bereits mit anderer Spule verknüpft`,unknownTag:`Unbekannter RFID-Tag erkannt`,usageHistory:`Verbrauchshistorie`,noUsageHistory:`Noch kein Verbrauch erfasst`,printName:`Druckname`,weightConsumed:`Verbrauchtes Gewicht`,clearHistory:`Löschen`,historyCleared:`Verbrauchshistorie gelöscht`,fillSourceLabel:`(Inv)`,lowStockThresholdError:`Der Schwellenwert muss zwischen 0.1 und 99.9 liegen`,assignMismatchTitle:`Material stimmt nicht überein`,assignMismatchMessage:`Das ausgewählte Spulenmaterial "{{spoolMaterial}}" stimmt nicht mit dem Tray-Material "{{trayMaterial}}" für {{location}} überein. Trotzdem zuweisen?`,assignMismatchConfirm:`Trotzdem zuweisen`,assignPartialMismatchMessage:`Das Spulenmaterial "{{spoolMaterial}}" ist ähnlich, stimmt aber nicht genau mit "{{trayMaterial}}" in {{location}} überein. Möchten Sie fortfahren?`,assignProfileMismatchMessage:`Das Spulenprofil "{{spoolProfile}}" stimmt nicht mit dem Fachprofil "{{trayProfile}}" in {{location}} überein. Möchten Sie fortfahren?`,assignReconfigureNote:`Der AMS-Slot wird mit dem Profil der Spule neu konfiguriert.`,spoolmanFilamentCatalog:`Spoolman-Filamentkatalog`,pickFromSpoolmanCatalog:`Aus Spoolman-Katalog wählen…`,spoolmanFilamentSelected:`Filament aus Spoolman-Katalog ausgewählt`,spoolmanFilamentUnlinked:`Verknüpfung mit Filamentkatalog aufgehoben`,noSpoolmanFilaments:`Keine Filamente im Spoolman-Katalog gefunden`,spoolmanFilamentColorSwatch:`Filamentfarbe`,spoolWeightManagedBySpoolman:`Das Leerspulengewicht wird pro Filamenttyp in Spoolman verwaltet`,spoolmanCatalogLoadFailed:`Spoolman-Filamentkatalog konnte nicht geladen werden`},timelapse:{title:`Zeitraffer`,create:`Zeitraffer erstellen`,download:`Herunterladen`,delete:`Löschen`,preview:`Vorschau`,frameRate:`Bildrate`,quality:`Qualität`,processing:`Wird verarbeitet...`,noTimelapses:`Keine Zeitraffer verfügbar`},ams:{title:`AMS`,slot:`Slot`,empty:`Leer`,emptySlot:`Leerer Slot`,slotEmpty:`Leer`,slotUnconfigured:`?`,emptySlotReset:`Keine Spule zugewiesen`,unknown:`Unbekannt`,humidity:`Luftfeuchtigkeit`,temperature:`Temperatur`,filamentType:`Filamenttyp`,filamentColor:`Farbe`,remaining:`Verbleibend`,history:`AMS-Verlauf`,noHistory:`Kein Verlauf verfügbar`,configureSlot:`Slot konfigurieren`,externalSpool:`Externe Spule`,profile:`Profil`,kFactor:`K-Faktor`,fill:`Füllstand`,configure:`Konfigurieren`,used:`verwendet`,remainingUnit:`verbleibend`},printModal:{title:`Druck starten`,selectPrinter:`Drucker auswählen`,selectPlate:`Platte auswählen`,filamentMapping:`Filamentzuordnung`,totalCost:`Gesamtkosten:`,slotRemainingShort:` - {{grams}}g übrig`,printSettings:`Druckeinstellungen`,bedLeveling:`Bett-Nivellierung`,flowCalibration:`Fluss-Kalibrierung`,vibrationCalibration:`Vibrations-Kalibrierung`,layerInspection:`Erste-Schicht-Prüfung`,timelapse:`Zeitraffer`,startPrint:`Druck starten`,addToQueue:`Zur Warteschlange hinzufügen`,cancel:`Abbrechen`,noPrintersAvailable:`Keine Drucker verfügbar`,printerBusy:`Drucker ist beschäftigt`,printerOffline:`Drucker ist offline`,sameTypeDifferentColor:`Gleicher Typ, andere Farbe`,filamentTypeNotLoaded:`Filamenttyp nicht geladen`,openCalendar:`Kalender öffnen`,leftNozzle:`L`,rightNozzle:`R`,leftNozzleTooltip:`Linke Düse`,rightNozzleTooltip:`Rechte Düse`,filamentOverride:`Filament-Überschreibung`,filamentOverrideHint:`Filamente für modellbasierte Zuweisung optional überschreiben. Der Planer wird gegen die ausgewählten Filamente statt der ursprünglichen 3MF-Werte abgleichen.`,originalFilament:`Original`,overrideWith:`Ersetzen mit`,resetToOriginal:`Auf Original zurücksetzen`,insufficientFilamentTitle:`Nicht genug Filament`,insufficientFilamentMessage:`Einige zugewiesene Spulen haben weniger Filament als dieser Druck benötigt:`,insufficientFilamentLine:`{{printer}} - {{slot}}: benötigt {{required}}g, verbleibend {{remaining}}g`,printAnyway:`Trotzdem drucken`,forceColorMatch:`Farbe erzwingen`,staggerPrinterStarts:`Druckerstarts staffeln`,staggerGroupSize:`Gruppengröße`,staggerInterval:`Intervall (Min.)`,staggerPreview:`{{printers}} Drucker → {{groups}} Gruppen à {{size}}, Start alle {{interval}} Min.`,staggerLastGroup:`letzte Gruppe: {{count}}`,staggerTotal:`insgesamt: {{minutes}} Min.`,staggerToPrinters:`Gestaffelt an {{count}} Drucker senden`,gcodeInjection:`Auto-Print G-code einfügen`},backup:{includesEncryptionKey:`Lokale Sicherungen enthalten die MFA-Schlüsseldatei (DATA_DIR/.mfa_encryption_key), damit ein Backup-ZIP selbstkonsistent ist. Behandle das ZIP als sensibel — wer Zugriff auf die Datei hat, kann die darin enthaltenen OIDC-Client-Secrets und TOTP-Geheimnisse entschlüsseln.`,title:`Sichern & Wiederherstellen`,createBackup:`Sicherung erstellen`,restoreBackup:`Sicherung wiederherstellen`,restoreDescription:`Alle Daten aus einer Sicherungsdatei ersetzen`,downloadBackup:`Sicherung herunterladen`,uploadBackup:`Sicherung hochladen`,lastBackup:`Letzte Sicherung`,autoBackup:`Automatische Sicherung`,backupNow:`Jetzt sichern`,restoreWarning:`Warnung: Das Wiederherstellen einer Sicherung überschreibt alle aktuellen Daten.`,includeArchives:`Archive einschließen`,includeSettings:`Einstellungen einschließen`,includeProfiles:`Profile einschließen`,backupSuccess:`Sicherung erfolgreich erstellt`,restoreSuccess:`Sicherung erfolgreich wiederhergestellt`,backupFailed:`Sicherung fehlgeschlagen`,restoreFailed:`Wiederherstellung fehlgeschlagen`,restoreNote:`Virtueller Drucker wird während der Wiederherstellung gestoppt`,githubBackup:`Git-Backup`,enabled:`Aktiviert`,cloudLoginRequired:`Bambu Cloud Login erforderlich. Melden Sie sich unter Profile → Cloud-Profile an, um GitHub-Backup zu aktivieren.`,cloudLoginRequiredShort:`Cloud-Login erforderlich`,githubDescription:`Synchronisieren Sie Ihre Profile automatisch mit einem privaten GitHub-Repository für Backup und Versionsverlauf.`,repoIsPrivate:`Repository ist privat — Sicherung möglich.`,repoIsPublicWarning:`Das Repository ist ÖFFENTLICH. Bambuddy-Backups enthalten MQTT-Zugangsdaten, Home-Assistant-Tokens, Prometheus-Tokens, Ihre Bambu-Cloud-E-Mail-Adresse und über K-Profile auch Drucker-Zugangscodes. Speichern ist blockiert, bis Sie das Repository in den Einstellungen Ihres Anbieters auf privat stellen.`,repoVisibilityUnknown:`Die Sichtbarkeit des Repositories konnte nicht bestimmt werden. Bambuddy sichert nur in Repositories, die nachweislich privat sind; Speichern wird blockiert.`,repositoryUrl:`Repository-URL`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Unsicheres HTTP erlauben`,allowInsecureHttpHint:`Für selbst gehostete Instanzen in privaten Netzwerken ohne TLS aktivieren`,personalAccessToken:`Persönlicher Zugriffstoken`,tokenSaved:`(gespeichert)`,enterNewToken:`Neuen Token eingeben zum Aktualisieren`,tokenHint:`Feingranularer Token mit Lese-/Schreibberechtigung für Inhalte`,branch:`Branch`,provider:`Git-Anbieter`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Nur manuell`,hourly:`Stündlich`,daily:`Täglich`,weekly:`Wöchentlich`,includeInBackup:`In Sicherung einschließen`,kProfiles:`K-Profile`,kProfilesDescription:`Druckvorschub-Kalibrierung von verbundenen Druckern`,noPrintersConnected:`Keine Drucker verbunden`,printersConnected:`{{connected}}/{{total}} verbunden`,cloudProfiles:`Cloud-Profile`,cloudProfilesDescription:`Filament-, Drucker- und Prozessprofile aus der Bambu Cloud`,appSettings:`App-Einstellungen`,appSettingsDescription:`Bambuddy-Konfiguration (komplette Datenbank)`,spoolInventory:`Spulenbestand`,spoolInventoryDescription:`Filamentspulen, Nutzungsverlauf und Kostenverfolgung`,printArchives:`Druckarchive`,printArchivesDescription:`Druckverlauf-Metadaten (keine GCode/3MF-Dateien)`,lastBackupAt:`Letzte Sicherung:`,noBackupsYet:`Noch keine Sicherungen`,next:`Nächste:`,startingBackup:`Sicherung wird gestartet...`,test:`Test`,enableBackup:`Sicherung aktivieren`,testConnection:`Verbindung testen`,enterRepoUrl:`Repository-URL eingeben`,enterRepoAndToken:`Repository-URL und Zugriffstoken eingeben`,repoRequired:`Repository-URL ist erforderlich`,tokenRequired:`Zugriffstoken ist erforderlich`,githubBackupEnabled:`GitHub-Backup aktiviert`,tokenUpdated:`Token aktualisiert`,settingsSaved:`Einstellungen gespeichert`,failedToSave:`Speichern fehlgeschlagen: {{message}}`,backupCompleteFiles:`Sicherung abgeschlossen - {{count}} Dateien aktualisiert`,backupSkippedNoChanges:`Sicherung übersprungen - keine Änderungen`,backupFailed2:`Sicherung fehlgeschlagen: {{message}}`,clearedLogs:`{{count}} Protokolle gelöscht`,failedToClearLogs:`Protokolle löschen fehlgeschlagen: {{message}}`,history:`Verlauf`,clear:`Löschen`,date:`Datum`,status:`Status`,commit:`Commit`,localBackup:`Lokale Sicherung`,localBackupDescription:`Erstellen Sie eine vollständige Sicherung Ihrer Bambuddy-Daten einschließlich Datenbank, Archive, Uploads und aller Dateien.`,downloadBackupLabel:`Sicherung herunterladen`,completeBackupZip:`Vollständige Sicherung: Datenbank + alle Dateien (ZIP)`,download:`Herunterladen`,preparingBackup:`Sicherung wird vorbereitet...`,creatingArchive:`Sicherungsarchiv wird erstellt... Dies kann bei großen Archiven eine Weile dauern.`,downloadingFile:`Sicherungsdatei wird heruntergeladen...`,backupDownloaded:`Sicherung erfolgreich heruntergeladen`,failedToCreateBackup:`Sicherung erstellen fehlgeschlagen: {{message}}`,restore:`Wiederherstellen`,restoreReplacesAll:`Wiederherstellung ersetzt alle Daten.`,restoreReplacesAllDetail:`Ihre aktuelle Datenbank und Dateien werden vollständig ersetzt. Nach der Wiederherstellung ist ein Neustart erforderlich.`,restoreConfirmTitle:`Sicherung wiederherstellen`,restoreConfirmMessage:`Sind Sie sicher, dass Sie von "{{filename}}" wiederherstellen möchten? Dies ersetzt Ihre aktuelle Datenbank und alle Dateien vollständig. Die Anwendung muss nach der Wiederherstellung neu gestartet werden.`,restoreConfirmButton:`Sicherung wiederherstellen`,uploadingFile:`Sicherungsdatei wird hochgeladen...`,backupRestoredRestart:`Sicherung wiederhergestellt. Bitte starten Sie Bambuddy neu.`,failedToRestore:`Sicherung wiederherstellen fehlgeschlagen. Bitte überprüfen Sie das Dateiformat.`,reloadNow:`Jetzt neu laden`,creatingBackup:`Sicherung erstellen`,restoringBackup:`Sicherung wiederherstellen`,preparing:`Vorbereiten...`,processing:`Verarbeiten...`,doNotClosePage:`Bitte schließen Sie diese Seite nicht und navigieren Sie nicht weg. Dieser Vorgang kann bei großen Sicherungen mehrere Minuten dauern.`,restoring:`Wiederherstellen...`,restoreComplete:`Wiederherstellung abgeschlossen`,restoreFailed2:`Wiederherstellung fehlgeschlagen`,importSettings:`Einstellungen aus einer Sicherungsdatei importieren`,pleaseWaitRestoring:`Bitte warten Sie, während Ihre Daten wiederhergestellt werden`,selectBackupFile:`Klicken Sie, um eine Sicherungsdatei auszuwählen (.json oder .zip)`,duplicateHandling:`So funktioniert die Duplikatbehandlung:`,matchPrinters:`Drucker`,matchPrintersBy:`abgeglichen nach Seriennummer`,matchSmartPlugs:`Smart Plugs`,matchSmartPlugsBy:`abgeglichen nach IP-Adresse`,matchNotificationProviders:`Benachrichtigungsanbieter`,matchNotificationProvidersBy:`abgeglichen nach Name`,matchFilaments:`Filamente`,matchFilamentsBy:`abgeglichen nach Name + Typ + Marke`,matchArchives:`Archive`,matchArchivesBy:`abgeglichen nach Inhaltshash (immer übersprungen)`,matchPendingUploads:`Ausstehende Uploads`,matchPendingUploadsBy:`abgeglichen nach Dateiname`,matchSettingsTemplates:`Einstellungen & Vorlagen`,matchSettingsTemplatesBy:`immer überschrieben`,replaceExisting:`Vorhandene Daten ersetzen`,keepExisting:`Vorhandene Daten behalten`,overwriteDescription:`Bereits vorhandene Elemente mit Sicherungsdaten überschreiben`,keepDescription:`Nur Elemente wiederherstellen, die noch nicht vorhanden sind`,overwriteCaution:`Achtung:`,overwriteWarning:`Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Daten aus der Sicherung. Drucker-Zugangscodes werden aus Sicherheitsgründen nie überschrieben.`,cancel:`Abbrechen`,processingBackup:`Sicherungsdatei wird verarbeitet...`,itemsRestored:`Wiederhergestellt`,itemsSkipped:`Übersprungen`,restored:`Wiederhergestellt`,skippedAlreadyExist:`Übersprungen (bereits vorhanden)`,filesCategory:`Dateien (3MF, Thumbnails, etc.)`,andMore:`...und {{count}} weitere`,newApiKeysGenerated:`Neue API-Schlüssel generiert`,keysShownOnce:`Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!`,copy:`Kopieren`,noDataFound:`In der Sicherungsdatei wurden keine Daten zur Wiederherstellung gefunden.`,close:`Schließen`,scheduledBackup:`Geplante Backups`,scheduledBackupDescription:`Backup-Snapshots automatisch nach Zeitplan erstellen. Ausgabeverzeichnis kann auf einen NAS oder externen Speicher gemountet werden.`,frequency:`Frequenz`,backupTime:`Zeit`,retention:`Aufbewahrung`,retentionDescription:`Anzahl der zu behaltenden Backups`,outputPath:`Ausgabepfad`,outputPathPlaceholder:`Standard: {{path}}`,outputPathDescription:`Leer lassen für den Standardort`,runNow:`Jetzt ausführen`,backupFiles:`Backup-Dateien`,noScheduledBackups:`Noch keine Backups`,deleteBackup:`Löschen`,deleteBackupConfirm:`Diese Backup-Datei löschen?`,backupRunning:`Backup läuft...`,scheduledBackupComplete:`Backup erfolgreich abgeschlossen`,scheduledBackupFailed:`Backup fehlgeschlagen`,nextBackup:`Nächstes Backup`,backupSize:`Größe`,localTimeHint:`Ortszeit ({{tz}})`,defaultPathLabel:`Standard:`,categories:{settings:`Einstellungen`,notification_providers:`Benachrichtigungsanbieter`,notification_templates:`Benachrichtigungsvorlagen`,smart_plugs:`Smart Plugs`,printers:`Drucker`,filaments:`Filamente`,maintenance_types:`Wartungstypen`,archives:`Archive`,projects:`Projekte`,pending_uploads:`Ausstehende Uploads`,external_links:`Externe Links`,api_keys:`API-Schlüssel`}},tags:{title:`Tags`,addTag:`Tag hinzufügen`,editTag:`Tag bearbeiten`,deleteTag:`Tag löschen`,tagName:`Tag-Name`,tagColor:`Tag-Farbe`,noTags:`Keine Tags`,deleteConfirm:`Möchten Sie diesen Tag wirklich löschen?`,manageTags:`Tags verwalten`},uploadModal:{title:`3MF-Dateien hochladen`,dragDrop:`3MF-Dateien hierher ziehen`,or:`oder`,browseFiles:`Dateien durchsuchen`,extractionInfo:`Das Druckermodell wird automatisch aus den 3MF-Datei-Metadaten extrahiert.`,uploaded:`hochgeladen`,failed:`fehlgeschlagen`,uploading:`Wird hochgeladen...`,upload:`Hochladen`,uploadFailed:`Hochladen fehlgeschlagen`},editArchive:{title:`Archiv bearbeiten`,name:`Name`,namePlaceholder:`Druckname`,printer:`Drucker`,noPrinter:`Kein Drucker`,project:`Projekt`,noProject:`Kein Projekt`,itemsPrinted:`Gedruckte Teile`,itemsPrintedHelp:`Anzahl der in diesem Druckauftrag produzierten Teile`,notes:`Notizen`,notesPlaceholder:`Notizen zu diesem Druck hinzufügen...`,externalLink:`Externer Link`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Link zu Printables, Thingiverse oder anderer Quelle`,tags:`Tags`,tagsPlaceholder:`Tags hinzufügen...`,addMoreTags:`Weitere Tags hinzufügen...`,matchingTags:`Übereinstimmend mit "{{query}}"`,existingTags:`Vorhandene Tags`,clickToAdd:`(zum Hinzufügen klicken)`,status:`Status`,failureReason:`Fehlergrund`,selectReason:`Grund auswählen...`,photos:`Fotos des Druckergebnisses`,photosHelp:`Klicken Sie auf + um Fotos Ihres Druckergebnisses hinzuzufügen`,printResult:`Druckergebnis`,saving:`Wird gespeichert...`,failureReasons:{adhesionFailure:`Haftungsfehler`,spaghettiDetached:`Spaghetti / Abgelöst`,layerShift:`Schichtversatz`,cloggedNozzle:`Verstopfte Düse`,filamentRunout:`Filament aufgebraucht`,warping:`Verformung`,stringing:`Fadenziehen`,underExtrusion:`Unterextrusion`,powerFailure:`Stromausfall`,userCancelled:`Vom Benutzer abgebrochen`,other:`Sonstiges`},statuses:{completed:`Abgeschlossen`,failed:`Fehlgeschlagen`,aborted:`Abgebrochen`,printing:`Druckt`}},kProfiles:{title:`K-Profile`,noPrintersConfigured:`Keine Drucker konfiguriert`,addPrinterInSettings:`Fügen Sie einen Drucker in den Einstellungen hinzu, um K-Profile zu verwalten`,noActivePrinters:`Keine aktiven Drucker`,enablePrinterConnection:`Aktivieren Sie eine Druckerverbindung, um K-Profile anzuzeigen`,loadingProfiles:`Lade K-Profile...`,printerOffline:`Drucker offline`,printerOfflineDesc:`Der ausgewählte Drucker ist nicht verbunden. Schalten Sie ihn ein, um K-Profile anzuzeigen.`,noMatchingProfiles:`Keine passenden Profile`,noMatchingProfilesDesc:`Keine Profile entsprechen Ihren Suchkriterien`,noKProfiles:`Keine K-Profile`,noKProfilesDesc:`Keine Druckvorschub-Profile für {{diameter}}mm Düse gefunden`,createFirstProfile:`Erstes Profil erstellen`,printer:`Drucker`,nozzle:`Düse`,refresh:`Aktualisieren`,addProfile:`Profil hinzufügen`,export:`Exportieren`,import:`Importieren`,select:`Auswählen`,selectAll:`Alle auswählen`,delete:`Löschen`,searchPlaceholder:`Nach Name oder Filament suchen...`,allExtruders:`Alle Extruder`,leftOnly:`Nur links`,rightOnly:`Nur rechts`,allFlow:`Alle Flusstypen`,hfOnly:`Nur HF`,sOnly:`Nur S`,sortName:`Sortieren: Name`,sortKValue:`Sortieren: K-Wert`,sortFilament:`Sortieren: Filament`,leftExtruder:`Linker Extruder`,rightExtruder:`Rechter Extruder`,modal:{addTitle:`K-Profil hinzufügen`,editTitle:`K-Profil bearbeiten`,profileName:`Profilname`,profileNamePlaceholder:`Mein PLA-Profil`,kValue:`K-Wert`,kValuePlaceholder:`0,020`,kValueHelp:`Typischer Bereich: 0,01 - 0,06 für PLA, 0,02 - 0,10 für PETG`,filament:`Filament`,selectFilament:`Filament auswählen...`,noFilamentsHelp:`Keine Filamente gefunden. Erstellen Sie zuerst ein K-Profil in Bambu Studio.`,flowType:`Flusstyp`,highFlow:`Hoher Durchfluss`,standard:`Standard`,nozzleSize:`Düsengröße`,extruder:`Extruder`,extruders:`Extruder`,left:`Links`,right:`Rechts`,notes:`Notizen (lokal gespeichert)`,notesPlaceholder:`Notizen zu diesem Profil hinzufügen...`,notesHelp:`Notizen werden in Bambuddy gespeichert, nicht auf dem Drucker`,syncing:`Synchronisiert mit Drucker...`,savingExtruder:`Speichern auf Extruder {{current}}/{{total}}...`,pleaseWait:`Bitte warten`},deleteConfirm:{title:`Profil löschen`,cannotUndo:`Dies kann nicht rückgängig gemacht werden`,message:`Möchten Sie "{{name}}" wirklich vom Drucker löschen?`},bulkDelete:{title:`Profile löschen`,cannotUndo:`Dies kann nicht rückgängig gemacht werden`,message:`Möchten Sie wirklich {{count}} ausgewählte Profile vom Drucker löschen?`},toast:{profileSaved:`K-Profil gespeichert`,profilesSaved:`K-Profil auf {{count}} Extrudern gespeichert`,selectAtLeastOneExtruder:`Bitte wählen Sie mindestens einen Extruder aus`,profileDeleted:`K-Profil gelöscht`,profilesDeleted:`{{count}} Profile gelöscht`,exportedProfiles:`{{count}} Profile exportiert`,importedProfiles:`{{count}} von {{total}} Profilen importiert`,noProfilesToExport:`Keine Profile zum Exportieren`,invalidFileFormat:`Ungültiges Dateiformat`,failedToParseImport:`Import-Datei konnte nicht gelesen werden`,failedToSaveBatch:`K-Profile konnten nicht gespeichert werden`,noteSaved:`Notiz gespeichert`,failedToSaveNote:`Notiz konnte nicht gespeichert werden`},permission:{noRead:`Sie haben keine Berechtigung, Profile zu aktualisieren`,noCreate:`Sie haben keine Berechtigung, Profile hinzuzufügen`,noUpdate:`Sie haben keine Berechtigung, K-Profile zu aktualisieren`,noDelete:`Sie haben keine Berechtigung, K-Profile zu löschen`,noExport:`Sie haben keine Berechtigung, Profile zu exportieren`,noImport:`Sie haben keine Berechtigung, Profile zu importieren`}},virtualPrinter:{title:`Virtueller Drucker`,running:`Läuft`,stopped:`Gestoppt`,description:{default:`Aktiviere einen virtuellen Drucker, der in Bambu Studio und OrcaSlicer erscheint. Dateien, die an diesen Drucker gesendet werden, werden direkt archiviert ohne zu drucken.`,proxy:`Aktiviere einen Proxy, der Slicer-Datenverkehr an einen echten Drucker weiterleitet, um Ferndruck über jedes Netzwerk zu ermöglichen.`},enable:{title:`Virtuellen Drucker aktivieren`,visibleInSlicer:`Sichtbar als "Bambuddy" in der Slicer-Erkennung`,proxyingTo:`Proxy zu {{name}}`,notActive:`Nicht aktiv`},model:{title:`Druckermodell`,description:`Wähle welches Druckermodell emuliert werden soll.`,restartWarning:`Das Ändern des Modells startet den virtuellen Drucker neu`},accessCode:{title:`Zugangscode`,isSet:`Zugangscode ist gesetzt`,notSet:`Kein Zugangscode gesetzt - erforderlich zum Aktivieren`,placeholder:`8-Zeichen-Code eingeben`,placeholderChange:`Neuen Code eingeben zum Ändern`,hint:`Muss genau 8 Zeichen lang sein. Wird von Slicern zur Authentifizierung verwendet.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Vom Zieldrucker übernommen`,derivedFromTargetHint:`Verwendet den Zugangscode des Zieldruckers. Die Brücke leitet die Slicer-Authentifizierung an den echten Drucker weiter, daher müssen die Codes übereinstimmen — den Druckercode in dessen Einstellungen ändern.`,reveal:`Zugangscode anzeigen`,hide:`Zugangscode verbergen`},targetPrinter:{title:`Zieldrucker`,configured:`Proxy-Ziel konfiguriert`,notConfigured:`Kein Zieldrucker ausgewählt - erforderlich für Proxy-Modus`,placeholder:`Drucker auswählen...`,hint:`Wähle den Drucker aus, an den der Slicer-Datenverkehr weitergeleitet werden soll. Der Drucker muss im LAN-Modus sein.`,noPrinters:`Keine Drucker konfiguriert. Füge zuerst einen Drucker hinzu, um den Proxy-Modus zu verwenden.`},remoteInterface:{title:`Netzwerkschnittstelle überschreiben`,configured:`Schnittstellenüberschreibung aktiv`,optional:`Optional - verwenden wenn die automatisch erkannte IP falsch ist (z.B. mehrere NICs, Docker, VPN)`,placeholder:`Automatisch erkennen (Standard)...`,hint:`Überschreibt die per SSDP beworbene und im TLS-Zertifikat verwendete IP-Adresse. Nützlich wenn Bambuddy mehrere Netzwerkschnittstellen hat.`},mode:{title:`Modus`,archive:`Archivieren`,archiveDesc:`Dateien sofort archivieren`,review:`Überprüfen`,reviewDesc:`Vor dem Archivieren überprüfen`,queue:`Warteschlange`,queueDesc:`Archivieren und zur Warteschlange hinzufügen`,proxy:`Proxy`,proxyDesc:`An echten Drucker weiterleiten`},autoDispatch:{title:`Automatisch starten`,description:`Drucke automatisch starten, wenn sie zur Warteschlange hinzugefügt werden. Wenn deaktiviert, warten Drucke auf manuellen Start.`},queueForceColorMatch:{title:`Farbabgleich erzwingen`,description:`Druckaufträge nur an Drucker senden, bei denen der genaue Filament-Typ und die genaue Farbe geladen sind. Standardmäßig deaktiviert — ohne diese Option verwendet die Warteschlange nur den Drucker-Modell-Abgleich und wählt möglicherweise einen Drucker mit der falschen Farbe.`},gcodeInjection:{title:`G-code-Injektion`,description:`Wendet die in den Einstellungen pro Modell konfigurierten G-code-Snippets auf Jobs dieses VP an. Standardmäßig aus.`},tailscaleDisabled:{title:`Tailscale-Integration`,description:`Aktivieren, um diesen VP als per Tailscale erreichbar zu markieren. Zeigt die Tailscale-Adresse des Hosts an, damit du weißt, welche IP du im Slicer eintragen musst. Der CA-Import bleibt unverändert — diese Option hat keinen Einfluss auf Zertifikate.`},setupRequired:{title:`Einrichtung erforderlich`,description:`Die virtuelle Druckerfunktion erfordert zusätzliche Systemkonfiguration, bevor sie funktioniert. Dies beinhaltet Portweiterleitung, Firewall-Regeln und plattformspezifische Einstellungen.`,readGuide:`Lese die Einrichtungsanleitung vor dem Aktivieren`},archiveNameSource:{title:`Quelle des Archivnamens`,description:`Lege fest, wie neue Archive benannt werden, wenn Dateien über den virtuellen Drucker eintreffen. "Metadaten" verwendet den im 3MF eingebetteten Titel des Slicers (Standard). "Dateiname" nutzt den Dateinamen, den Bambu Studio per FTP gesendet hat. Hinweis: Bambu Studio überschreibt den im Dialog "Zum Drucker senden" eingegebenen Namen mit dem Titelfeld der 3MF, sofern eines vorhanden ist — beide Modi liefern daher oft denselben Wert.`,metadata:`Metadaten`,filename:`Dateiname`},caCert:{title:`Slicer-Zertifikat`,description:`Virtuelle Drucker verwenden ein TLS-Zertifikat, das von der Bambuddy-CA signiert ist. Importieren Sie dieses CA-Zertifikat einmalig in den Vertrauensspeicher Ihres Slicers, damit er die Verbindung akzeptiert — kein Abrufen über die Kommandozeile mehr nötig.`,copy:`Kopieren`,copied:`Kopiert`,download:`Herunterladen`,fingerprint:`SHA-256`},howItWorks:{title:`So funktioniert es`,step1:`Im selben LAN erscheinen virtuelle Drucker automatisch in deinem Slicer (Bambu Studio / OrcaSlicer). Aus anderen Netzwerken füge sie manuell per IP-Adresse und Zugangscode hinzu.`,step2:`Im Archiv-, Überprüfungs- und Warteschlangen-Modus verwende die "Senden"-Funktion im Slicer, um 3MF-Dateien an Bambuddy zu senden. Der Slicer zeigt "Druck erfolgreich" — die Datei wird gespeichert, nicht gedruckt.`,step3:`Im Proxy-Modus leitet der virtuelle Drucker den gesamten Datenverkehr an einen echten Drucker weiter — Drucke starten sofort wie bei einer direkten Verbindung.`},status:{title:`Status-Details`,printerName:`Druckername`,model:`Modell`,serialNumber:`Seriennummer`,mode:`Modus`,pendingFiles:`Ausstehende Dateien`,targetPrinter:`Zieldrucker`,ftpPort:`FTP-Port`,mqttPort:`MQTT-Port`,ftpConnections:`FTP-Verbindungen`,mqttConnections:`MQTT-Verbindungen`},toast:{updated:`Virtuelle Druckereinstellungen aktualisiert`,failedToUpdate:`Einstellungen konnten nicht aktualisiert werden`,copyFailed:`Kopieren fehlgeschlagen — bitte Text manuell markieren`,accessCodeRequired:`Bitte zuerst einen Zugangscode setzen`,targetPrinterRequired:`Bitte zuerst einen Zieldrucker auswählen`,bindIpRequired:`Bitte zuerst eine Bind-IP setzen`,accessCodeEmpty:`Zugangscode darf nicht leer sein`,accessCodeLength:`Zugangscode muss genau 8 Zeichen lang sein`,targetCodeChangedRebind:`Zugangscode wurde an den neuen Zieldrucker angepasst. Bitte dieses Gerät im Slicer neu hinzufügen, damit der neue Code übernommen wird.`,created:`Virtueller Drucker erstellt`,failedToCreate:`Virtueller Drucker konnte nicht erstellt werden`,deleted:`Virtueller Drucker gelöscht`,failedToDelete:`Virtueller Drucker konnte nicht gelöscht werden`},list:{title:`Virtuelle Drucker`,add:`Hinzufügen`,addFirst:`Virtuellen Drucker hinzufügen`,empty:`Keine virtuellen Drucker konfiguriert. Fügen Sie einen hinzu, um zu beginnen.`},bindIp:{title:`Bind-Interface`,placeholder:`Interface auswählen...`,hint:`Netzwerkinterface, an das dieser virtuelle Drucker gebunden wird. Muss pro Drucker eindeutig sein.`},proxy:{accessCodeHint:`Im Proxy-Modus den Zugangscode des Zieldruckers im Slicer verwenden. Die Verbindung wird transparent zum echten Drucker weitergeleitet.`},addDialog:{title:`Virtuellen Drucker hinzufügen`,name:`Name`,hint:`Sie können Zugangscode, Zieldrucker und andere Einstellungen nach dem Erstellen konfigurieren.`,create:`Erstellen`},deleteConfirm:{title:`Virtuellen Drucker löschen`,message:`Möchten Sie "{{name}}" wirklich löschen? Dies stoppt alle Dienste für diesen Drucker.`}},modelViewer:{openInSlicer:`Im Slicer öffnen`,tabs:{model:`3D-Modell`,gcode:`G-Code Vorschau`},notAvailable:`nicht verfügbar`,notSliced:`nicht geslicet`,plates:`Platten`,allPlates:`Alle Platten`,plateNumber:`Platte {{number}}`,plateCount:`{{count}} Platte`,plateCount_other:`{{count}} Platten`,objectCount:`{{count}} Objekt`,objectCount_other:`{{count}} Objekte`,filamentCount:`{{count}} Filament`,filamentCount_other:`{{count}} Filamente`,eta:`ETA {{minutes}} Min`,noPreview:`Keine Vorschau für diese Datei verfügbar`,pagination:{pageOf:`Seite {{current}} von {{total}}`,prev:`Zurück`,next:`Weiter`},errors:{failedToLoad:`Datei konnte nicht geladen werden`,noMeshes:`Keine Meshes in 3MF-Datei gefunden`,unsupportedFormat:`Nicht unterstütztes Dateiformat`}},maintenanceDescriptions:{lubricateCarbonRods:`Schmiermittel auf Karbonstäbe für sanfte Bewegung auftragen`,lubricateRails:`Schmiermittel auf Linearschienen für sanfte Bewegung auftragen`,cleanNozzle:`Hotend und Düse reinigen, um Verstopfungen zu verhindern`,checkBelts:`Riemenspannung für präzise Drucke überprüfen`,cleanBuildPlate:`Druckplatte für bessere Haftung reinigen`,checkExtruder:`Extruderzahnräder auf Verschleiß prüfen`,checkCooling:`Sicherstellen, dass Lüfter ordnungsgemäß funktionieren`,generalInspection:`Allgemeine Druckerinspektion`,cleanCarbonRods:`Karbonstäbe reinigen, um Reibung zu reduzieren`,lubricateSteelRods:`Schmiermittel auf Stahlstangen für sanfte Bewegung auftragen`,cleanSteelRods:`Stahlstangen reinigen, um Reibung zu reduzieren`,cleanLinearRails:`Linearschienen abwischen, um Staub und Schmutz zu entfernen`,checkPtfeTube:`PTFE-Schlauch auf Verschleiß oder Beschädigung prüfen`,replaceHepaFilter:`HEPA-Filter für Luftqualität ersetzen`,replaceCarbonFilter:`Aktivkohlefilter ersetzen`,lubricateLeftNozzleRail:`Linke Düsenschiene schmieren (H2-Serie)`},smartPlugs:{offline:`Offline`,admin:`Admin`,openPlugAdminPage:`Plug-Admin-Seite öffnen`,deleteSmartPlug:`Smart Plug löschen`,turnOnSmartPlug:`Smart Plug einschalten`,turnOffSmartPlug:`Smart Plug ausschalten`,turnOn:`Einschalten`,turnOff:`Ausschalten`,addSmartPlug:{scanningNetwork:`Netzwerk wird durchsucht...`,chooseEntity:`Entität auswählen...`,connectionFailed:`Verbindung fehlgeschlagen`,searchEntities:`Entitäten suchen...`,searchPowerSensors:`Leistungssensoren suchen...`,searchEnergySensors:`Energiesensoren suchen...`,placeholders:{plugName:`Wohnzimmer Steckdose`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Gleich wie Leistungs-Topic oder anders`}},linkedTo:`Verbunden mit:`,monitorOnly:`Nur Überwachung`,alerts:`Alarme`,scheduleOn:`Ein {{time}}`,scheduleOff:`Aus {{time}}`,on:`Ein`,off:`Aus`,power:`Leistung`,kwhToday:`kWh Heute`,settings:`Einstellungen`,automationSettings:`Automatisierungseinstellungen`,showInSwitchbar:`In Schaltleiste anzeigen`,quickAccessSidebar:`Schnellzugriff über Seitenleiste`,enabled:`Aktiviert`,enableAutomation:`Automatisierung für diesen Stecker aktivieren`,autoOn:`Auto Ein`,autoOnDescription:`Einschalten wenn Druck startet`,autoOff:`Auto Aus`,autoOffDescription:`Ausschalten wenn Druck abgeschlossen (einmalig)`,autoOffPersistent:`Aktiviert lassen`,autoOffPersistentDescription:`Zwischen Drucken aktiviert bleiben statt einmalig`,autoOffAfterDrying:`Automatisch aus nach Trocknung`,autoOffAfterDryingDescription:`Ausschalten, wenn AMS-Trocknung abgeschlossen ist`,delayAfterDryingMinutes:`Verzögerung nach Trocknung (Minuten)`,turnOffDelayMode:`Ausschaltverzögerungsmodus`,time:`Zeit`,temp:`Temp.`,delayMinutes:`Verzögerung (Minuten)`,tempThreshold:`Temperaturschwelle (°C)`,tempThresholdDescription:`Schaltet aus wenn die Düse unter diese Temperatur abkühlt`,edit:`Bearbeiten`,deleteConfirm:`Möchten Sie "{{name}}" wirklich löschen? Dies kann nicht rückgängig gemacht werden.`,turnOnConfirm:`Möchten Sie "{{name}}" wirklich einschalten?`,turnOffConfirm:`Möchten Sie "{{name}}" wirklich ausschalten? Dies unterbricht die Stromversorgung des angeschlossenen Geräts.`,failedToTurn:`{{name}}" konnte nicht {{action}} werden`,unknown:`Unbekannt`,addTitle:`Smart Plug hinzufügen`,editTitle:`Smart Plug bearbeiten`,stopScanning:`Suche beenden`,discoverTasmota:`Tasmota Geräte suchen`,foundDevices:`{{count}} Gerät(e) gefunden - zum Auswählen klicken:`,noDevicesFound:`Keine Tasmota Geräte in Ihrem Netzwerk gefunden`,haNotConfigured:`Home Assistant ist nicht konfiguriert. Einrichtung unter`,haSettingsPath:`Einstellungen → Netzwerk → Home Assistant`,selectEntity:`Entität auswählen *`,ipAddress:`IP-Adresse *`,nameLabel:`Name *`,username:`Benutzername`,password:`Passwort`,authHint:`Leer lassen, wenn Ihr Tasmota-Gerät keine Authentifizierung benötigt`,linkToPrinter:`Mit Drucker verbinden`,noPrinter:`Kein Drucker (nur manuelle Steuerung)`,linkingDescription:`Verknüpfung ermöglicht automatisches Ein-/Ausschalten bei Druckstart/-ende`,powerAlerts:`Leistungsalarme`,alertAbove:`Alarm wenn über (W)`,alertBelow:`Alarm wenn unter (W)`,alertDescription:`Benachrichtigung wenn der Stromverbrauch diese Schwellenwerte überschreitet. Leer lassen um diese Richtung zu deaktivieren.`,dailySchedule:`Tagesplan`,turnOnAt:`Einschalten um`,turnOffAt:`Ausschalten um`,scheduleDescription:`Den Stecker automatisch täglich zu diesen Zeiten ein-/ausschalten. Leer lassen um diese Aktion zu überspringen.`,showOnPrinterCard:`Auf Druckerkarte anzeigen`,displayOnPrinterCard:`Schaltfläche auf Druckerkarte anzeigen`,connectedResult:`Verbunden!`,deviceLabel:`Gerät: {{name}} - `,stateLabel:`Status: {{state}}`,test:`Test`,delete:`Löschen`,save:`Speichern`,add:`Hinzufügen`,cancel:`Abbrechen`,failedToStartScan:`Suche konnte nicht gestartet werden`,nameRequired:`Name ist erforderlich`,entityRequired:`Entität ist für Home Assistant Stecker erforderlich`,mqttTopicRequired:`Mindestens ein MQTT-Topic muss für Leistung, Energie oder Statusüberwachung konfiguriert sein`,loadingEntities:`Entitäten werden geladen...`,loading:`Laden...`,failedToLoadEntities:`Entitäten konnten nicht geladen werden: {{error}}`,noEntitiesMatching:`Keine Entitäten gefunden die "{{search}}" entsprechen`,noEntitiesAvailable:`Keine Entitäten verfügbar`,searchingEntities:`Alle Entitäten durchsuchen ({{count}} gefunden)`,showingEntities:`Zeige switch, light, input_boolean ({{count}} verfügbar)`,energyMonitoringOptional:`Energieüberwachung (Optional)`,energyMonitoringHint:`Sensoren suchen und auswählen, die Leistungs-/Energiedaten liefern.`,powerSensorW:`Leistungssensor (W)`,energyTodayKwh:`Energie Heute (kWh)`,totalEnergyKwh:`Gesamtenergie (kWh)`,noMatchingSensors:`Keine passenden Sensoren`,none:`Keine`,mqttNotConfigured:`MQTT-Broker nicht konfiguriert. Broker-Adresse einstellen unter`,mqttSettingsPath:`Einstellungen → Netzwerk → MQTT-Veröffentlichung`,mqttNotConfiguredSuffix:`(Sie müssen die Veröffentlichung nicht aktivieren, nur die Broker-Details ausfüllen).`,mqttMonitorOnlyDescription:`MQTT-Stecker empfangen Leistungs-/Energiedaten über MQTT-Abonnement. Ein-/Ausschalten ist nicht verfügbar - verwenden Sie Ihren MQTT-Broker oder Ihr Home-Automation-System.`,powerMonitoring:`Leistungsüberwachung`,energyMonitoring:`Energieüberwachung`,stateMonitoring:`Statusüberwachung`,optional:`optional`,topic:`Thema`,jsonPath:`JSON-Pfad`,multiplier:`Multiplikator`,onValue:`EIN-Wert`,mqttPowerHint:`JSON-Pfad extrahiert Wert aus JSON-Payload (z.B. "power_l1"). Leer lassen wenn Topic rohe numerische Werte sendet. @@ -39,13 +39,13 @@ ON值：表示"ON"的确切字符串。留空以自动检测（ON、true、1） ON值：表示"ON"的確切字串。留空以自動檢測（ON、true、1）。`,restControl:`控制`,restOnUrl:`開啟 URL`,restOffUrl:`關閉 URL`,restOnBody:`開啟請求內容`,restOffBody:`關閉請求內容`,restMethod:`HTTP 方法`,restHeaders:`自訂標頭（JSON）`,restStatusUrl:`狀態 URL`,restStatusPath:`狀態 JSON 路徑`,restStatusOnValue:`ON 值`,restPowerUrl:`功率URL`,restPowerPath:`功率 JSON 路徑`,restPowerMultiplier:`功率乘數`,restEnergyUrl:`能耗URL`,restEnergyPath:`能耗 JSON 路徑`,restEnergyMultiplier:`能耗乘數`,restUrlRequired:`REST 插座至少需要一個 URL（ON 或 OFF）`,restHeadersHint:`例如：{"Authorization": "Bearer your-token"}`,restBodyHint:`例如：ON、{"state": "on"}`,restStatusHint:`用於輪詢目前狀態的 URL`,restPathHint:`例如：state 或 data.power.status`,restPowerUrlHint:`功率資料的獨立URL（留空則使用狀態URL）`,restEnergyUrlHint:`能耗資料的獨立URL（留空則使用狀態URL）`,restEnergyHint:`每個值可以使用獨立的URL，或回退到狀態 URL。使用乘數進行單位轉換（例如：0.001 將 Wh 轉換為 kWh）。`,testConnection:`測試連線`,connectionSuccess:`連線成功`,noSwitchesInSwitchbar:`開關欄中沒有開關`,enableSwitchbarHint:`在設定 > 智慧插座中啟用"在開關欄顯示"`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`電子郵件`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`},providerDescriptions:{email:`SMTP 電子郵件通知`,telegram:`透過 Telegram 機器人傳送通知`,discord:`透過 Webhook 傳送到 Discord 頻道`,ntfy:`免費、可自託管的推送通知`,pushover:`簡單、可靠的推送通知`,callmebot:`透過 CallMeBot 免費傳送 WhatsApp 通知`,webhook:`通用 HTTP POST 到任意 URL`,homeassistant:`Home Assistant 儀表板中的持久通知`},lastSuccess:`上次：{{date}}`,error:`錯誤`,printer:`印表機：`,allPrinters:`所有印表機`,sendTestNotification:`傳送測試通知`,eventSettings:`事件設定`,enabled:`已啟用`,sendFromProvider:`從此提供者傳送通知`,printEvents:`列印事件`,printerStatus:`印表機狀態`,amsAlarms:`AMS 警報`,amsHtAlarms:`AMS-HT 警報`,printQueue:`列印佇列`,start:`開始`,plateCheck:`熱床檢測`,complete:`完成`,failed:`失敗`,stopped:`已停止`,progress:`進度`,offline:`離線`,lowFilament:`耗材不足`,maintenance:`維護`,amsHumidity:`AMS 濕度`,amsTemp:`AMS 溫度`,amsHtHumidity:`AMS-HT 濕度`,amsHtTemp:`AMS-HT 溫度`,bedCooled:`熱床已冷卻`,firstLayer:`首層完成`,quiet:`免打擾`,digest:`摘要 {{time}}`,printStarted:`列印已開始`,plateNotEmpty:`熱床非空`,plateNotEmptyDescription:`列印前偵測到物體`,printCompleted:`列印已完成`,bedCooledLabel:`熱床已冷卻`,bedCooledDescription:`列印後熱床溫度降至閾值以下`,firstLayerCompleteLabel:`首層列印完成`,firstLayerCompleteDescription:`首層完成時傳送帶照片的通知`,missingSpoolAssignmentLabel:`缺少料卷分配`,missingSpoolAssignmentDescription:`當列印開始且所需料盤沒有分配料卷時傳送通知`,printFailed:`列印失敗`,printStopped:`列印已停止`,progressMilestones:`進度里程碑`,progressMilestonesDescription:`在 25%、50%、75% 時通知`,printerOffline:`印表機離線`,printerError:`印表機錯誤`,aiFailureDetection:`AI 失敗偵測`,aiFailureDetectionDescription:`當 Obico AI 偵測到可能的列印失敗時通知`,lowFilamentLabel:`耗材不足`,maintenanceDue:`需要維護`,maintenanceDueDescription:`需要維護時通知`,amsHumidityHigh:`AMS 濕度過高`,amsHumidityHighDescription:`普通 AMS 濕度超過閾值`,amsTemperatureHigh:`AMS 溫度過高`,amsTemperatureHighDescription:`普通 AMS 溫度超過閾值`,amsHtHumidityHigh:`AMS-HT 濕度過高`,amsHtHumidityHighDescription:`AMS-HT 濕度超過閾值`,amsHtTemperatureHigh:`AMS-HT 溫度過高`,amsHtTemperatureHighDescription:`AMS-HT 溫度超過閾值`,inventoryAlerts:`庫存警報`,stockReorderAlert:`補貨警報`,stockReorderAlertDescription:`SKU 已達到補貨點`,stockBreakAlert:`斷貨警報`,stockBreakAlertDescription:`庫存將在補貨到達前耗盡`,jobAdded:`任務已新增`,jobAddedDescription:`任務已新增到佇列`,jobAssigned:`任務已分配`,jobAssignedDescription:`基於模型的任務已分配給印表機`,jobStarted:`任務已開始`,jobStartedDescription:`佇列任務已開始列印`,jobWaiting:`任務等待中`,jobWaitingDescription:`任務正在等待耗材或印表機`,jobSkipped:`任務已跳過`,jobSkippedDescription:`任務已跳過（上一個失敗）`,jobFailed:`任務失敗`,jobFailedDescription:`任務啟動失敗`,queueComplete:`佇列已完成`,queueCompleteDescription:`所有佇列任務已完成`,quietHours:`免打擾時段`,noNotificationsDuring:`在此時段內不傳送通知`,editProviderToChangeQuietHours:`編輯提供者以更改免打擾時段`,dailyDigest:`每日摘要`,batchNotifications:`將通知彙總為每日摘要`,sendAt:`傳送於 {{time}}`,editProviderToChangeDigestTime:`編輯提供者以更改摘要時間`,edit:`編輯`,deleteProvider:`刪除通知提供者`,deleteConfirm:`確定要刪除"{{name}}"嗎？此操作無法復原。`,delete:`刪除`,addTitle:`新增通知提供者`,editTitle:`編輯通知提供者`,nameLabel:`名稱 *`,namePlaceholder:`我的通知`,providerTypeLabel:`提供者類型 *`,configuration:`設定`,testConfiguration:`測試設定`,printerFilter:`印表機篩選`,onlyFromPrinter:`僅傳送來自此印表機的事件通知`,quietHoursDnd:`免打擾時段`,quietStart:`開始`,quietEnd:`結束`,dailyDigestLabel:`每日摘要`,sendDigestAt:`傳送摘要於`,digestCollected:`事件將被收集並在此時間作為單條摘要傳送`,notificationEvents:`通知事件`,progressPercent:`（25%、50%、75%）`,bedCooledAfterPrint:`（列印完成後）`,eventPriority:{sectionTitle:`ntfy 優先級`,helpNtfy:`為每個已啟用的事件選擇優先級。ntfy 使用它來升級提醒（聲音、可見性、推播行為）。此處未設定的級別將使用 ntfy 伺服器預設值。`,min:`最低`,low:`低`,default:`預設`,high:`高`,urgent:`緊急`},cancel:`取消`,save:`儲存`,add:`新增`,nameRequired:`名稱為必填項`,fieldRequired:`{{field}}為必填項`,phoneNumber:`電話號碼`,apiKey:`API 金鑰`,serverUrl:`伺服器 URL`,topic:`主題`,authToken:`認證權杖`,userKey:`使用者金鑰`,appToken:`應用程式權杖`,priority:`優先順序`,botToken:`機器人權杖`,chatId:`聊天 ID`,smtpServer:`SMTP 伺服器`,smtpPort:`SMTP 連接埠`,security:`安全`,authentication:`認證`,username:`使用者名稱`,password:`密碼`,fromEmail:`寄件人信箱`,toEmail:`收件人信箱`,webhookUrl:`Webhook URL`,payloadFormat:`負載格式`,authorization:`授權`,titleFieldName:`標題欄位名`,messageFieldName:`訊息欄位名`,editTemplate:`編輯範本：{{name}}`,titleLabel:`標題`,bodyLabel:`正文`,titlePlaceholder:`通知標題...`,bodyPlaceholder:`通知正文...`,availableVariables:`可用變數`,clickToInsert:`點選插入到正文游標位置`,livePreview:`即時預覽`,hide:`隱藏`,show:`顯示`,loadingPreview:`載入預覽中...`,enterTemplateContent:`輸入範本內容以檢視預覽`,titlePreview:`標題：`,bodyPreview:`正文：`,resetToDefault:`恢復預設`,titleRequired:`標題為必填項`,bodyRequired:`正文為必填項`,notificationLog:`通知日誌`,showFailedOnly:`僅顯示失敗`,last24Hours:`最近 24 小時`,last7Days:`最近 7 天`,last30Days:`最近 30 天`,last90Days:`最近 90 天`,justNow:`剛剛`,noFailedNotifications:`沒有失敗的通知`,noNotificationsLogged:`沒有通知紀錄`,unknownProvider:`未知提供者`,logTitle:`標題`,logMessage:`訊息`,logError:`錯誤`,logProvider:`提供者：{{type}}`,logTime:`時間：{{time}}`,refresh:`重新整理`,clearOld:`清除舊紀錄`,statsSummary:`最近 {{days}} 天：`,statsNotifications:`條通知`,statsSent:`{{count}} 條已傳送`,statsFailed:`{{count}} 條失敗`,eventTypes:{print_start:`列印已開始`,print_complete:`列印完成`,print_failed:`列印失敗`,print_stopped:`列印已停止`,print_progress:`進度`,printer_offline:`印表機離線`,printer_error:`印表機錯誤`,filament_low:`耗材不足`,maintenance_due:`需要維護`,test:`測試`},userEmail:{title:`通知`,emailNotifications:`郵件通知`,emailNotificationsDesc:`接收您自己列印任務的郵件通知。郵件將透過進階身份驗證中設定的 SMTP 設定傳送。`,sendingTo:`通知將傳送至`,noEmailWarning:`您的帳戶沒有郵件地址。請聯絡管理員新增。`,printJobNotifications:`列印任務通知`,printJobNotificationsDesc:`選擇哪些事件會觸發您提交的列印任務的郵件通知。`,printJobStarts:`列印任務開始`,printJobStartsDesc:`當您的列印任務開始時收到通知。`,printJobFinishes:`列印任務完成`,printJobFinishesDesc:`當您的列印任務成功完成時收到通知。`,printErrors:`列印錯誤`,printErrorsDesc:`當您的列印任務失敗或遇到錯誤時收到通知。`,printJobStops:`列印任務停止`,printJobStopsDesc:`當您的列印任務被取消或停止時收到通知。`,saveSuccess:`通知偏好設定已儲存。`,saveError:`儲存通知偏好設定失敗。`}},richTextEditor:{bold:`粗體`,italic:`斜體`,underline:`底線`,bulletList:`無序列表`,numberedList:`有序列表`,alignLeft:`左對齊`,alignCenter:`居中對齊`,alignRight:`右對齊`,addLink:`新增連結`,removeLink:`移除連結`},externalLinks:{title:`側邊欄連結`,sidebarLayout:`側邊欄`,sidebarLayoutDescription:`顯示或隱藏內建頁面、加入外部連結，並拖曳項目以重新排序側邊欄導覽。`,systemPages:`Bambuddy 頁面`,externalLinks:`外部連結`,visibleInSidebar:`顯示於側邊欄`,hiddenFromSidebar:`隱藏於側邊欄`,requiredInSidebar:`側邊欄中必須顯示`,hidePage:`隱藏頁面`,showPage:`顯示頁面`,settingsCannotBeHidden:`設定無法隱藏`,noLinksConfigured:`未設定外部連結`,deleteLink:`刪除連結`,removeCustomIcon:`移除自訂圖示`,openInNewTab:`在新標籤頁中開啟`,placeholders:{linkName:`我的連結`}},keyboardShortcuts:{title:`鍵盤快捷鍵`,navigation:`導航`,archivesSection:`歸檔`,kProfilesSection:`K 值設定`,generalSection:`通用`,shortcuts:{goToPrinters:`前往印表機`,goToArchives:`前往歸檔`,goToQueue:`前往佇列`,goToStats:`前往統計`,goToProfiles:`前往雲端設定`,goToSettings:`前往設定`,focusSearch:`聚焦搜尋`,openUploadModal:`開啟上傳對話方塊`,clearSelection:`清除選擇 / 取消焦點`,contextMenu:`卡片右鍵選單`,refreshProfiles:`重新整理設定`,newProfile:`新增設定`,exitSelectionMode:`結束選擇模式`,showHelp:`顯示此協助`},footer:`按 Esc 或點選外部關閉`},notificationLog:{title:`通知日誌`,events:{printStarted:`列印開始`,printComplete:`列印完成`,printFailed:`列印失敗`,printStopped:`列印停止`,progress:`進度`,printerOffline:`印表機離線`,printerError:`印表機錯誤`,lowFilament:`耗材不足`,maintenanceDue:`維護到期`,test:`測試`},timeAgo:{justNow:`剛剛`,minutesAgo:`{{minutes}} 分鐘前`,hoursAgo:`{{hours}} 小時前`}},restoreBackup:{title:`恢復備份`,restoring:`恢復中...`,restoreComplete:`恢復完成`,restoreFailed:`恢復失敗`,importSettings:`從備份檔案匯入設定`,pleaseWait:`請稍候，正在恢復您的資料`,clickToSelect:`點選選擇備份檔案（.json 或 .zip）`,howDuplicateHandling:`重複處理方式：`,categories:{printers:`印表機`,smartPlugs:`智慧插座`,notificationProviders:`通知提供者`,filaments:`耗材`,archives:`歸檔`,pendingUploads:`待處理上傳`,settingsTemplates:`設定和範本`},matchingInfo:{printers:`按序列號匹配`,smartPlugs:`按 IP 位址匹配`,notificationProviders:`按名稱匹配`,filaments:`按名稱 + 類型 + 品牌匹配`,archives:`按內容雜湊匹配`,pendingUploads:`按檔名匹配`,settingsTemplates:`始終覆蓋`},replaceExisting:`替換現有資料`,keepExisting:`保留現有資料`,replaceDescription:`用備份資料覆蓋已存在的項目`,keepDescription:`僅恢復不存在的項目`,caution:`注意：`,cautionText:`覆蓋將用備份資料替換您目前的設定。出於安全考慮，印表機存取碼永遠不會被覆蓋。`,itemsRestored:`已恢復項目`,itemsSkipped:`已跳過項目`,restored:`已恢復`,skipped:`已跳過（已存在）`,filesLabel:`檔案（3MF、縮圖等）`,newApiKeysGenerated:`已產生新 API 金鑰`,newApiKeysWarning:`這些金鑰僅顯示一次。請立即複製！`,processingBackup:`處理備份檔案中...`,noDataFound:`備份檔案中未找到可恢復的資料。`,failedToRestore:`恢復備份失敗。請檢查檔案格式。`},backupExport:{title:`匯出備份`,selectData:`選擇要包含的資料`,selectAll:`全選`,selectNone:`全不選`,categoryDescriptions:{settings:`語言、主題、更新偏好`,notifications:`ntfy、Pushover、Discord 等`,templates:`自訂訊息範本`,smartPlugs:`Tasmota 插座設定`,externalLinks:`側邊欄外部服務連結`,printers:`印表機資訊（不含存取碼）`,plateDetection:`空列印板參考影像`,filaments:`耗材類型和成本`,maintenance:`自訂維護計畫`,archives:`所有列印資料 + 檔案（3MF、縮圖、照片）`,projects:`專案、材料清單和附件`,pendingUploads:`虛擬印表機待審核的上傳`,apiKeys:`Webhook API 金鑰（匯入時產生新金鑰）`},requiresPrinters:`需要選擇印表機`,zipFileWarning:`將建立 ZIP 檔案。`,zipFileDescription:`包括所有 3MF 檔案、縮圖、縮時攝影和照片。這可能需要一些時間並產生較大的檔案。`,includeAccessCodes:`包含存取碼`,includeAccessCodesDescription:`用於轉移到另一臺機器`,includeAccessCodesWarning:`存取碼將以明文形式包含。請妥善保管此備份檔案！`,categoriesSelected:`已選擇 {{selectedCount}} 個類別`},pendingUploads:{placeholders:{notes:`新增關於此列印的備註...`},discardUpload:`丟棄上傳`,archiveAllUploads:`歸檔所有上傳`,discardAllUploads:`丟棄所有上傳`,archive:`歸檔`,timeAgo:{justNow:`剛剛`,minutesAgo:`{{minutes}} 分鐘前`,hoursAgo:`{{hours}} 小時前`,daysAgo:`{{days}} 天前`}},apiBrowser:{placeholders:{requestBody:`JSON 請求體...`,searchEndpoints:`搜尋端點...`}},configureAmsSlot:{title:`設定 AMS 槽位`,slotConfigured:`槽位已設定！`,configuringSlot:`正在設定槽位：`,slotLabel:`{{ams}} 槽位 {{slot}}`,searchPresets:`搜尋預設...`,colorPlaceholder:`顏色名稱或十六進位（例如：棕色、FF8800）`,clearCustomColor:`清除自訂顏色`,noCloudPresets:`無雲端預設。登入拓竹雲以同步。`,noPresetsAvailable:`無可用預設。登入拓竹雲或匯入本機設定。`,noMatchingPresets:`未找到匹配的預設。`,custom:`自訂`,builtin:`內建`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`設定已傳送到印表機`,filamentProfile:`耗材設定`,kProfileLabel:`K 值設定（壓力推進）`,filteringFor:`篩選：{{material}}`,noKProfile:`無 K 值設定（使用預設值 0.020）`,noMatchingKProfiles:`未找到匹配的 K 值設定。將使用預設 K=0.020。`,selectFilamentFirst:`請先選擇耗材設定`,kFromCalibration:`K={{value}}（來自印表機校準）`,customColorLabel:`自訂顏色（可選）`,presetColors:`{{name}} 顏色：`,showLessColors:`顯示更少顏色`,showMoreColors:`顯示更多顏色`,clear:`清除`,hexLabel:`十六進位：#{{hex}}`,resetting:`重設中...`,resetSlot:`重設槽位`,cancel:`取消`,configuring:`設定中...`,configureSlot:`設定槽位`},githubBackup:{title:`Git 備份`,history:`歷史`,downloadBackup:`下載備份`,restoreBackup:`恢復備份`,noBackupsYet:`尚無備份`},emailSettings:{placeholders:{fromName:`Bambuddy`}},tagManagement:{searchTags:`搜尋標籤...`,renameTag:`重新命名標籤`,deleteTag:`刪除標籤`},notificationTemplates:{placeholders:{title:`通知標題...`,body:`通知正文...`}},batchTag:{placeholders:{newTag:`輸入新標籤...`}},photoGallery:{deletePhoto:`刪除照片`},filamentHoverCard:{copySpoolUuid:`複製耗材 UUID`},kProfilesView:{hasNote:`有備註`,copyProfile:`複製設定`},layout:{openMenu:`開啟選單`,noPermissionSystemInfo:`您沒有檢視系統資訊的權限`},dashboard:{dragToReorder:`拖曳以重新排列`,hideWidget:`隱藏小工具`},notificationProviderCard:{deleteNotificationProvider:`刪除通知提供者`},fileManagerModal:{closeFileManager:`關閉檔案管理器`,sortFiles:`排序檔案`,goToParentFolder:`返回上級資料夾`,threeView:`3D 檢視`},embeddedCameraViewer:{refreshStream:`重新整理流`,close:`關閉`,zoomOut:`縮小`,resetZoom:`重設縮放`,zoomIn:`放大`,dragToResize:`拖曳調整大小`},timelapseViewer:{skipBack5s:`後退 5 秒`,skipForward5s:`前進 5 秒`},notificationProviders:{descriptions:{email:`SMTP 郵件通知`,telegram:`透過 Telegram 機器人通知`,discord:`透過 Webhook 傳送到 Discord 頻道`,ntfy:`免費、可自託管的推送通知`,pushover:`簡單、可靠的推送通知`,callmebot:`透過 CallMeBot 的免費 WhatsApp 通知`,webhook:`通用 HTTP POST 到任意 URL`}},logViewer:{searchPlaceholder:`搜尋訊息或日誌名稱...`,noLogEntries:`未找到日誌條目`},switchbarPopover:{noSwitchesInSwitchbar:`切換欄中沒有開關`},projectPageModal:{placeholders:{title:`標題`,designer:`設計師`,license:`許可證`,description:`輸入描述...`,profileTitle:`設定標題`,profileDescription:`設定描述...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`等待中`,justNow:`剛剛`,now:`現在`,minsAgo:`{{count}} 分鐘前`,inMins:`{{count}} 分鐘後`,hoursAgo:`{{count}} 小時前`,inHours:`{{count}} 小時後`,daysAgo:`{{count}} 天前`,inDays:`{{count}} 天後`},spoolbuddy:{nav:{dashboard:`儀表板`,ams:`AMS`,inventory:`庫存`,writeTag:`寫入`,settings:`設定`},status:{nfcReady:`NFC 就緒`,nfcOff:`NFC 關閉`,offline:`離線`,online:`線上`,noPrinters:`無印表機`,deviceOffline:`裝置離線`,waitingConnection:`等待裝置連線...`,systemReady:`系統就緒`,status:`狀態`},dashboard:{readyToScan:`準備掃描`,idleMessage:`將耗材放在磅秤上以識別`,nfcHint:`NFC 標籤將自動讀取`,device:`裝置`,syncWeight:`同步重量`,weightSynced:`已同步！`,unknownTag:`未知標籤`,newTag:`偵測到新標籤`,onScale:`在磅秤上`,linkSpool:`連結到耗材`,linkTagTitle:`將標籤連結到耗材`,linkTag:`連結標籤`,selectSpool:`選擇要連結此標籤的耗材：`,noUntagged:`未找到沒有標籤的耗材`,tagDetected:`偵測到標籤`,noTag:`無標籤`,tagId:`標籤`,grossWeight:`毛重`,spoolSize:`耗材盤尺寸`,close:`關閉`,currentSpool:`目前耗材`,plateReady:`熱床就緒: {{name}}`,plateReadyLabel:`待清理的熱床`,plateClearAction:`清理`,plateClearedToast:`已將熱床標記為已清理`,plateClearFailed:`無法將熱床標記為已清理`},modal:{spoolDetected:`偵測到耗材`,assignToAms:`分配到 AMS`,syncWeight:`同步重量`,weightSynced:`已同步！`,syncing:`同步中...`,newTagDetected:`偵測到新標籤`,addToInventory:`新增到庫存`,assignToAmsTitle:`分配到 AMS`,selectSlot:`選擇槽位`,assign:`分配`,assigning:`分配中...`,assignSuccess:`已分配！`,assignPendingInsert:`已分配。插入耗材後將設定槽位。`,assignError:`分配耗材失敗。請重試。`,noPrinterSelected:`選擇印表機...`,noAmsDetected:`此印表機未偵測到 AMS`,slot:`槽位`},weight:{noReading:`無讀數`,stable:`穩定`,measuring:`測量中...`,tare:`去皮`,calibrate:`校準`},spool:{remaining:`剩餘`,material:`材料`,brand:`品牌`,color:`顏色`,coreWeight:`軸心重`,labelWeight:`標籤重`,scaleWeight:`磅秤重`,netWeight:`淨重`,lastUsed:`上次使用`},ams:{noData:`未偵測到 AMS`,connectAms:`連線 AMS 以檢視耗材槽位`,noPrinter:`未選擇印表機`,selectPrinter:`從頂部欄選擇印表機`,printerDisconnected:`印表機已斷開`,humidity:`濕度`,level:`餘量`,active:`活躍`,slot:`槽位`,empty:`空`},inventory:{search:`搜尋耗材...`,empty:`庫存中沒有耗材`,noResults:`沒有匹配的耗材`,spools:`個耗材`,addSpool:`新增耗材`},settings:{tabDevice:`裝置`,tabDisplay:`顯示`,tabScale:`磅秤`,tabUpdates:`更新`,nfcReader:`NFC 讀卡器`,type:`類型`,connection:`連線`,notConnected:`不適用`,deviceInfo:`裝置資訊`,hostname:`主機`,uptime:`執行時間`,systemConfig:`後端與認證`,backendUrl:`Bambuddy 後端 URL`,apiToken:`API 權杖`,apiTokenPlaceholder:`輸入 API 權杖`,saveConfig:`儲存設定`,systemQueued:`設定已加入佇列。`,nfcDiagnostic:`NFC 診斷`,scaleDiagnostic:`磅秤診斷`,readTagDiagnostic:`讀取標籤診斷`,testNfc:`測試讀卡器`,testScale:`測試精度`,testReadTag:`讀取標籤`,systemFieldsRequired:`後端 URL 為必填項。`,brightness:`亮度`,saved:`已儲存`,noBacklight:`未偵測到 DSI 背光。亮度控制需要 DSI 螢幕。`,screenBlank:`螢幕熄滅超時`,screenBlankDesc:`不活動後螢幕關閉。觸控喚醒。`,displayNote:`亮度作為軟體濾鏡套用。`,scaleCalibration:`磅秤校準`,currentWeight:`目前重量`,tareOffset:`去皮`,calFactor:`係數`,knownWeight:`已知重量`,calStep1:`移除磅秤上所有物品並按設定零點。`,calStep2:`將已知重量放在磅秤上。`,setZero:`設定零點`,calibrateNow:`校準`,calibrated:`已校準`,tareSet:`去皮命令已傳送。等待裝置回應...`,tareComplete:`去皮完成！`,tareTimedOut:`去皮逾時 — SpoolBuddy 守護程序是否正在執行？`,tareFailed:`傳送去皮命令失敗`,zeroSet:`零點已設定。將已知重量放在磅秤上。`,calibrationDone:`校準完成！`,calibrationFailed:`校準失敗`,lastCalibrated:`上次校準`,stable:`穩定`,settling:`穩定中...`,firmware:`韌體`,scale:`磅秤`,noDevice:`未找到 SpoolBuddy 裝置`,daemonVersion:`守護程式版本`,currentVersion:`目前`,versionPending:`等待守護程式...`,checking:`檢查中...`,checkUpdates:`檢查更新`,updateAvailable:`有可用更新`,updateInstructions:`透過 SSH 更新：執行 SpoolBuddy 安裝腳本進行升級。`,upToDate:`已是最新`,includeBeta:`包含測試版本`},writeTag:{tabExisting:`現有耗材`,tabNew:`新耗材`,tabReplace:`替換標籤`,searchPlaceholder:`按材料、顏色、品牌搜尋...`,noUntaggedSpools:`沒有無標籤的耗材`,noTaggedSpools:`沒有有標籤的耗材`,selectSpool:`選擇一個耗材，然後將空白 NTAG 放在讀卡器上`,placeTag:`將 NTAG 放在讀卡器上`,tagReady:`偵測到標籤 — 準備寫入`,writeTag:`寫入標籤`,replaceTag:`替換標籤`,writing:`寫入標籤中...`,waiting:`等待 SpoolBuddy...`,writeSuccess:`標籤寫入成功！`,writeFailed:`寫入失敗`,queueFailed:`佇列寫入命令失敗`,tryAgain:`重試`,cancel:`取消`,replaceWarning:`舊標籤將被取消連結。新標籤將替換它。`,deviceOffline:`SpoolBuddy 離線`,material:`材料`,colorName:`顏色名稱`,color:`顏色`,brand:`品牌`,weight:`重量 (g)`,createSpool:`建立耗材`,creating:`建立中...`,spoolCreated:`耗材已建立！準備寫入。`,createFailed:`建立耗材失敗`,incompleteDataWarning:`已使用不完整的Spoolman資料寫入標籤`},quickMenu:{printerPower:`印表機電源`,systemControls:`系統`,restartDaemon:`重新啟動守護程式`,restartBrowser:`重新啟動瀏覽器`,reboot:`重新開機`,shutdown:`關機`,swipeToClose:`向下滑動關閉`,confirmTitle:`確認`,confirmShutdown:`確定要關閉 SpoolBuddy 嗎？您需要實體存取才能重新開啟。`,confirmReboot:`確定要重新開機 SpoolBuddy 嗎？`,confirmRestartDaemon:`重新啟動 SpoolBuddy 守護程式？NFC 和磅秤將暫時不可用。`,confirmRestartBrowser:`重新啟動kiosk瀏覽器？螢幕將短暫變黑。`,confirm:`確認`,confirmPlugOn:`開啟 {{name}}？`,confirmPlugOff:`關閉 {{name}}？`,turnOn:`開啟`,turnOff:`關閉`}},diagnostic:{modalTitle:`連線診斷 — {{name}}`,running:`正在執行診斷...`,runningElapsed:`正在執行診斷... ({{elapsed}}秒)`,waitingForReportHint:`正在等待印表機發佈狀態報告 — 最長可能需要 {{max}} 秒。`,runFailed:`無法執行診斷：{{error}}`,retry:`重新執行`,runButton:`執行診斷`,sectionTitle:`連線診斷`,sectionDescription:`檢查印表機無法連線或無法列印的原因 — 連接埠可達性、LAN 開發者模式、Docker 網路模式與認證資訊。`,noPrinters:`未設定印表機。`,overall:{ok:`未發現問題 — 印表機連線看起來正常。`,warnings:`印表機應該可以運作，但有些項目需要注意。`,problems:`發現了可解釋印表機無法連線或無法列印的問題。`},check:{port_mqtt:{title:`控制連接埠（MQTT 8883）`,pass:`可達 — 印表機正在接受控制連線。`,fail:`連接埠 8883 無法連線。印表機已關機、IP 位址不同，或被防火牆封鎖。請核實印表機 IP，並確保沒有任何東西封鎖連接埠 8883。`},port_ftps:{title:`檔案傳輸連接埠（FTPS 990）`,pass:`可達 — 傳送列印檔案將正常運作。`,warn:`連接埠 990 無法連線。監控可能仍然有效，但向印表機傳送列印工作將失敗。請確保連接埠 990 未被封鎖。`},external_storage:{title:`將傳送的檔案儲存在外部儲存中（安裝步驟 4）`,pass:`印表機回報此選項已開啟 — 傳送的檔案將儲存在 SD 卡上，封存將包含縮圖和切片機中繼資料。`,fail:`印表機回報此選項已關閉。請啟用「將傳送的檔案儲存在外部儲存中」 — 在較新韌體 (P2S 01.02 / Bambu Studio 2.6+) 中，開關位於印表機的列印設定中；在較舊版本中位於 Bambu Studio / OrcaSlicer 的裝置分頁中。如果未啟用此選項，每次封存的列印都將沒有縮圖也沒有切片機中繼資料。`,skip:`未檢查 — 需要有效的 MQTT 連線。在該設定僅存在於切片機中的較舊切片機上，印表機不會回報此設定，因此即使選項已關閉，此檢查也會通過 — 請手動驗證安裝步驟 4。`},port_rtsps:{title:`攝影機連接埠（RTSPS 322）`,pass:`可達 — 攝影機串流將正常運作。`,warn:`連接埠 322 無法連線。即時攝影機檢視將無法運作。這不影響列印。`},network_mode:{title:`Docker 網路模式`,pass:`正在以 host 網路模式執行。`,warn:`Bambuddy 正在以 Docker bridge 網路執行。印表機探索與虛擬印表機需要 host 網路模式 — 請使用 "network_mode: host" 重新建立容器。`,skip:`未在 Docker 中執行 — 不適用。`},subnet:{title:`網路子網路`,pass:`印表機與 Bambuddy 位於同一子網路。`,warn:`印表機（{{printer_ip}}）與 Bambuddy（{{host_ip}}）位於不同的子網路。除非設定了子網路之間的路由，否則它們可能無法互相連線。`,skip:`無法判定子網路 — 已略過。`},mqtt_auth:{title:`印表機認證資訊`,pass:`印表機已接受連線。`,fail:`印表機可達，但拒絕了連線。存取碼或序號很可能有誤。每次切換開發者模式時存取碼都會變更 — 請從印表機螢幕重新複製。`,skip:`未檢查 — 無法連線到印表機。`},developer_mode:{title:`LAN 開發者模式`,pass:`開發者模式已啟用。`,fail:`印表機上的開發者模式已關閉。請在印表機的 LAN 設定中啟用它 — 並按 OK 確認。否則列印將無法開始。`,skip:`無法檢查 — 需要與印表機的即時連線。`},printer_publishing:{title:`印表機正在發佈狀態`,pass:`印表機正在發佈狀態更新 — AMS、耗材和 K 配置將正確鏡像到切片軟體。`,fail:`MQTT 代理已接受連線，但印表機未發佈任何狀態報告。這幾乎總是因為序號錯誤或大小寫不一致 — device//report 主題區分大小寫。請將印表機設定中的序號與印表機螢幕上的顯示進行核對。`,skip:`無法檢查 — 需要與印表機的即時連線。`}}},systemHealth:{sectionTitle:`系統健康`,sectionDescription:`掃描最近的日誌以找出已知問題，在它們演變成支援工單之前，通常你可以自行解決。`,rescan:`重新掃描`,clean:`在最近 {{times}} 筆日誌中未發現已知問題。`,logUnavailable:`檔案日誌記錄已停用，因此無法掃描日誌。請啟用檔案日誌以使用此檢查。`,learnMore:`如何解決`,fixLabel:`解決方法：`,occurrences:`出現 {{times}} 次 — 最近一次 {{lastSeen}}`,category:{layer8:`你可以自行解決`,environment:`環境`,bug:`請回報此問題`},signature:{"ftp-auth-rejected":{name:`印表機拒絕了存取碼`,cause:`印表機拒絕了檔案傳輸登入。存取碼錯誤，或在切換開發者模式後已變更。`,fix:`從印表機螢幕（區域網路設定）重新複製存取碼，並在 Bambuddy 的印表機設定中更新。`},"ftp-connection-timeout":{name:`檔案傳輸連線逾時`,cause:`Bambuddy 無法連線印表機的檔案傳輸連接埠（FTPS 990）。該連接埠被封鎖，或印表機已關機或位於其他子網路。`,fix:`請確認 Bambuddy 與印表機之間的 990 連接埠未被封鎖，且兩者位於同一網路。`},"ftp-ssl-error":{name:`安全檔案傳輸交握失敗`,cause:`與印表機檔案傳輸伺服器的 TLS 交握失敗。通常是防火牆或印表機韌體過舊所致。`,fix:`請更新印表機韌體，並檢查沒有防火牆或代理伺服器攔截 990 連接埠上的連線。`},"mqtt-connection-flapping":{name:`印表機連線反覆中斷`,cause:`控制連線（MQTT 8883）反覆中斷並重新連線——通常是網路訊號弱或連接埠被部分封鎖所致。`,fix:`請檢查印表機附近的 Wi-Fi 訊號，盡量使用有線連線，並確認 8883 連接埠能夠穩定連線。`},"camera-connection-refused":{name:`無法存取攝影機串流`,cause:`無法在 RTSPS 322 連接埠連線即時攝影機。該連接埠被封鎖，或印表機上的攝影機或區域網路即時影像已關閉。`,fix:`請在印表機上啟用攝影機和區域網路即時影像，並確認 322 連接埠未被封鎖。這不會影響列印。`},"database-locked":{name:`資料庫寫入衝突`,cause:`在負載下 SQLite 資料庫出現 "database is locked" 錯誤——同時使用多台印表機時較為常見。`,fix:`請將 Bambuddy 切換到外部 PostgreSQL 資料庫。參見文件中的 PostgreSQL 指南。`}}},vpDiagnostic:{title:`設定檢查 — {{name}}`,runButton:`執行設定檢查`,running:`正在執行設定檢查...`,runFailed:`無法執行設定檢查：{{error}}`,retry:`重新執行`,overall:{ok:`所有檢查均已通過 — 此虛擬印表機已正確設定。`,warnings:`虛擬印表機應該可以運作，但有些方面需要注意。`,problems:`發現的問題可以解釋切片軟體為何無法看到或使用此虛擬印表機。`},check:{enabled:{title:`虛擬印表機已啟用`,fail:`此虛擬印表機已關閉。請將其開啟以使其可被探索。`},running:{title:`服務正在執行`,fail:`虛擬印表機已啟用，但其服務未執行。請檢查 Bambuddy 記錄 — 通常是繫結 IP 衝突或權限錯誤使其停止。`},bind_interface:{title:`繫結網路介面`,fail:`繫結介面未設定，或在此主機上已不存在。請在「繫結介面」下拉選單中選擇一個目前的介面。`},access_code:{title:`已設定存取碼`,fail:`未設定存取碼。必須向切片軟體提供與您在此處設定的相同的 8 位存取碼。`},target_printer:{title:`目標印表機`,fail:`未選擇目標印表機。代理模式需要一台實際的印表機進行轉送。`,warn:`目標印表機目前處於離線狀態 — 重新連線後將恢復轉送。`},port_ftps:{title:`檔案上傳服務（連接埠 {{port}}）`,fail:`繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體無法上傳檔案。通常是此介面上的連接埠衝突所致。`},port_mqtt:{title:`控制服務（連接埠 {{port}}）`,fail:`繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體無法連線或顯示狀態。`},port_bind:{title:`探索服務（連接埠 {{port}}）`,fail:`繫結 IP 的連接埠 {{port}} 上沒有任何監聽，因此切片軟體的探索交握會失敗。`},certificate:{title:`TLS 憑證`,pass:`憑證已就緒。請確保已將 Bambuddy CA 憑證（上方）匯入切片軟體的信任庫。`,fail:`此虛擬印表機的 TLS 憑證遺失。請檢查 Bambuddy 資料目錄是否可寫入。`}}},bugReport:{logHealthSummary:`在你的日誌中發現了已知問題`,logHealthIntro:`最近的日誌與已知問題相符。請查看下方的解決方法——解決它們可能無需提交錯誤報告即可解決你的問題。你仍然可以在下方提交報告。`,title:`報告錯誤`,description:`描述`,descriptionPlaceholder:`出了什麼問題？請描述問題...`,email:`信箱（可選）`,emailPlaceholder:`your@email.com`,emailPrivacy:`如果提供，您的信箱將包含在GitHub Issue的摺疊部分中，以便維護者後續跟進。`,screenshot:`截圖`,uploadOrPaste:`上傳、貼上或拖曳圖片`,dataCollectedSummary:`報告中包含哪些資料？`,dataIncluded:`包含：`,dataIncludedList:`應用程式版本、作業系統、架構、Python版本、資料庫統計（僅計數）、印表機型號、噴嘴數量、韌體版本、連線狀態、整合狀態（Spoolman、MQTT、HA）、非敏感設定、網路介面數量、Docker詳情、依賴版本。`,dataNeverIncluded:`絕不包含：`,dataNeverIncludedList:`印表機名稱、序列號、存取碼、密碼、IP 位址、信箱地址、API金鑰、權杖、Webhook URL、主機名稱或使用者名稱。`,submit:`提交`,startLogging:`開始偵錯日誌`,stepEnableLogging:`偵錯日誌已啟用`,stepReproduce:`請現在重現問題`,stepStopLogging:`停止並提交報告`,stopAndSubmit:`停止並提交`,maxDuration:`{{minutes}} 分鐘後自動停止`,stoppingLogs:`正在收集日誌並提交...`,submitting:`正在提交錯誤報告...`,submittingStepConnection:`正在執行印表機連線檢查`,submittingStepVirtualPrinters:`正在執行虛擬印表機設定檢查`,submittingStepLogScan:`正在掃描最近的日誌以尋找已知問題`,submittingStepSubmit:`正在將報告提交至 GitHub`,submitSuccess:`錯誤報告提交成功！`,submitFailed:`提交錯誤報告失敗`,diagnosticChecking:`正在檢查印表機連線...`,diagnosticHealthy:`連線檢查通過 — 未在您的印表機上發現問題。`,diagnosticSummary:`{{total}} 台印表機中有 {{problems}} 台存在連線問題`,diagnosticIntro:`一台或多台印表機存在連線問題，可能正是您遇到問題的原因。請展開下方的印表機查看解決方法 — 解決它也許無需提交錯誤報告即可解決問題。您仍然可以在下方提交報告。`,thankYou:`謝謝！`,submitted:`您的錯誤報告已提交。`,viewIssue:`檢視 Issue`,unexpectedError:`發生了意外錯誤`},failureDetection:{title:`AI 故障檢測`,description:`透過自託管的 Obico ML API 監控列印,並對偵測到的故障自動採取行動。`,mlUrl:`Obico ML API 地址`,mlUrlHint:`您自託管的 Obico ml_api 容器的基礎 URL(例如 http://192.168.1.10:3333)。`,test:`測試`,testSuccess:`ML API 可存取且正常。`,testFailed:`無法存取 ML API。`,sensitivity:`靈敏度`,sensitivityLow:`低(減少誤報)`,sensitivityMedium:`中(平衡)`,sensitivityHigh:`高(更早檢測,更多誤報)`,sensitivityHint:`調整觸發警告和故障的置信度閾值。`,action:`偵測到故障時的操作`,actionNotify:`僅通知`,actionPause:`暫停列印`,actionPauseOff:`暫停並切斷電源`,pollInterval:`檢查間隔(秒)`,pollIntervalHint:`列印過程中每臺印表機的檢查頻率。最小 5 秒,最大 120 秒。`,externalUrlMissing:`尚未設定外部 URL。`,externalUrlHint:`ML API 透過 URL 擷取攝影機快照。請在一般設定中設定外部 URL，讓 ML API 容器可以連線到 Bambuddy。`,perPrinterTitle:`監控的印表機`,perPrinterHint:`選擇檢測服務要監視哪些印表機。`,monitorAll:`監控所有已連線的印表機`,statusTitle:`狀態`,serviceRunning:`服務執行中`,thresholds:`低 / 高閾值`,activePrinters:`活動列印`,noActivePrints:`目前沒有正在進行的列印。`,historyTitle:`最近檢測`,noHistory:`尚無檢測紀錄。`},makerworld:{title:`MakerWorld`,description:`貼上 MakerWorld 模型連結，即可直接在 Bambuddy 中匯入並列印 —— 無需切換至 Bambu Handy 應用程式。`,pasteUrlHeader:`從 MakerWorld 匯入`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… 或貼上任意 MakerWorld 連結`,resolveButton:`解析`,signInRequiredTitle:`下載需要登入 Bambu Cloud`,signInRequiredBody:`您可以匿名瀏覽模型詳情，但下載 3MF 檔案需要 Bambu Cloud 帳戶。`,openCloudSettings:`開啟雲端設定`,untitledModel:`無標題模型`,byCreator:`作者: {{name}}`,downloadsCount:`{{count}} 次下載`,licensePrefix:`授權條款`,alreadyImported:`已在資料庫中`,openOnMakerworld:`在 MakerWorld 中開啟`,alreadyInLibrary:`此模型已在您的資料庫中 —— 可在檔案管理員 → MakerWorld 中找到`,importSuccess:`已匯入 {{filename}} —— 已儲存至檔案管理員 → MakerWorld`,platesHeader:`列印板 ({{count}})`,plateDefaultName:`列印板 {{n}}`,materialCount:`{{count}} 種耗材`,amsRequired:`需要 AMS`,slicedFor:`為 {{printer}} 切片`,alsoCompatible:`還標記為相容：{{printers}}`,importToLibrary:`儲存`,sliceIn:`儲存並在 {{slicer}} 中切片`,disclaimer:`MakerWorld 整合使用由社群記錄的 API 介面。Bambuddy 與 MakerWorld 或 Bambu Lab 無從屬或認可關係。`,lastImportSuccess:`已匯入您的資料庫`,lastImportAlreadyInLibrary:`已存在於您的資料庫中`,viewInLibrary:`在檔案管理員中查看`,openInBambuStudio:`在 Bambu Studio 中開啟`,openInOrcaSlicer:`在 OrcaSlicer 中開啟`,importTo:`匯入至檔案管理員`,recentImportsHeader:`最近匯入`,phaseResolving:`解析中`,phaseDownloading:`下載中`,folderAuto:`MakerWorld (預設)`,importAll:`全部匯入`,importAllProgress:`正在匯入 {{current}}/{{total}}`,openGallery:`開啟圖片庫`,galleryPrev:`上一張`,galleryNext:`下一張`,deleteImport:`從資料庫中移除`,importDeleting:`正在移除…`,importDeleted:`已從資料庫中移除`,confirmDelete:`從資料庫中移除 {{filename}}？本機檔案將被刪除，但可以從 MakerWorld 重新匯入。`,errors:{resolveFailed:`無法解析該 MakerWorld 連結。`,downloadFailed:`下載失敗。請重試。`,deleteFailed:`無法從資料庫中移除檔案。`}},gcodeViewer:{back:`返回`,backToArchives:`返回列印歸檔`,backToFiles:`返回檔案管理器`},libraryTrash:{title:`資源回收筒`,headerButton:`資源回收筒`,headerTooltip:`檢視已移至資源回收筒的檔案`,backToFiles:`返回檔案管理員`,subtitleAdmin:`已刪除的檔案會在資源回收筒保留 {{days}} 天，之後自動刪除。此檢視顯示所有使用者的資源回收筒。`,subtitleUser:`已刪除的檔案會在資源回收筒保留 {{days}} 天，之後自動刪除。`,loading:`正在載入資源回收筒…`,loadError:`無法載入資源回收筒。`,empty:`資源回收筒是空的。`,summary:`{{count}} 個檔案 · {{size}}`,emptyTrash:`清空資源回收筒`,restore:`還原`,purgeNow:`立即刪除`,autoPurgeIn:`將於 {{when}} 自動刪除`,days:`天`,retentionLabel:`自動刪除時間`,selectAll:`全選`,selectOne:`選擇 {{filename}}`,selectionCount:`已選擇 {{count}} 項`,bulkRestore:`還原所選`,bulkPurge:`刪除所選`,col:{filename:`檔案`,folder:`資料夾`,size:`大小`,deleted:`移入資源回收筒`,autoPurge:`自動刪除`,owner:`擁有者`,actions:`操作`},confirm:{purgeTitle:`永久刪除？`,purgeBody:`{{filename}} 將從磁碟中刪除，無法還原。`,emptyTitle:`清空資源回收筒？`,emptyBody:`全部 {{count}} 個檔案將從磁碟中刪除。此操作無法復原。`,bulkPurgeTitle:`永久刪除所選檔案？`,bulkPurgeBody:`所選的 {{count}} 個檔案將從磁碟中刪除，無法還原。`,cta:`永久刪除`},toast:{restored:`檔案已還原。`,restoreFailed:`無法還原檔案。`,purged:`檔案已永久刪除。`,purgeFailed:`無法刪除檔案。`,emptied:`已從資源回收筒刪除 {{count}} 個檔案。`,emptyFailed:`無法清空資源回收筒。`,retentionSaved:`自動刪除已設定為 {{days}} 天。`,retentionFailed:`無法儲存保留設定。`,bulkRestored:`已還原 {{count}} 個檔案。`,bulkPurged:`已刪除 {{count}} 個檔案。`}},libraryPurge:{title:`清理舊檔案`,headerButton:`清理舊檔案`,headerTooltip:`批次將舊檔案移至資源回收筒`,description:`早於所選時間的檔案將被移至資源回收筒。外部資料夾會被略過。在自動刪除之前，您可以從資源回收筒還原檔案。`,ageLabel:`移動早於以下天數的檔案`,days:`天`,includeNeverPrinted:`包括從未列印過的檔案`,effectsTitle:`點擊清除時會發生什麼`,effect1:`符合的檔案移至回收筒 — 尚未從磁碟刪除。`,effect2:`在保留期到期之前，您可以隨時從回收筒復原。`,effect3:`保留期滿後，回收筒清理器將它們從磁碟永久刪除。`,effect4:`外部（連結）資料夾中的檔案將被略過 — Bambuddy 從不刪除不屬於自己的位元組。`,previewLoading:`正在檢查符合的檔案數量…`,previewFailed:`無法預覽清理結果。`,previewSummary:`{{count}} 個檔案 · {{size}} 將被移至資源回收筒`,andMore:`…還有 {{count}} 個`,warning:`檔案將被軟刪除——在保留期結束前，您可以從資源回收筒還原它們。`,confirmCta:`將 {{count}} 個移至資源回收筒`,purging:`正在移至資源回收筒…`,toast:{success:`已將 {{count}} 個檔案移至資源回收筒。`,failed:`無法清理檔案。`}},libraryAutoPurge:{enableLabel:`自動清理舊檔案`,enableDescription:`每天執行一次管理員清理。檔案會先進入資源回收筒——不會立即刪除。`,ageLabel:`自動清理早於以下天數的檔案`,ageDescription:`最少 7 天，最多 10 年。使用與手動「清理舊檔案」按鈕相同的時間規則。`,days:`天`,includeNeverPrinted:`包括從未列印過的檔案`,saveFailed:`無法儲存自動清理設定。`},archivePurge:{headerButton:`清除舊條目`,headerTooltip:`批次刪除舊歸檔`,title:`清除舊歸檔`,description:`清除舊的列印歷史。每個歸檔按其最近一次列印完成時間老化 — 重新列印歸檔會重新整理其年齡，因此活躍工作永遠不會被清除。`,ageLabel:`刪除最近未列印的歸檔：`,days:`天`,effectsTitle:`點擊清除時會發生什麼`,effect1:`每個符合的歸檔將從清單中隱藏，其磁碟檔案（3MF、縮圖、縮時攝影、原始 3MF、F3D、照片）也會被刪除。`,effect2:`資料庫中的歸檔記錄會保留，因此 Quick Stats 仍可計入耗材、時間、成本與能耗的貢獻 — 與單筆刪除的預設行為一致。`,effect3:`勾選下方「同時從統計中移除」，可一併清除 Quick Stats 中的貢獻（等同單筆刪除選項）。此操作無法復原。`,effect4:`重新列印歸檔會重新整理其使用計時器，因此仍在使用的歸檔不會被清除。`,purgeStatsLabel:`同時從統計中移除`,purgeStatsHint:`從 Quick Stats（耗材、時間、成本、能耗）中移除符合的歸檔。未勾選時，Quick Stats 會保留所有貢獻，僅檔案從磁碟刪除。`,previewLoading:`檢查符合的歸檔數量…`,previewFailed:`無法預覽清除。`,previewSummary:`將移除 {{count}} 個歸檔 · {{size}}`,andMore:`…還有 {{count}} 個`,warning:`檔案會從磁碟刪除且無法復原。繼續前請下載或收藏您想保留的內容。`,confirmCta:`移除 {{count}} 個歸檔`,purging:`移除中…`,toast:{success:`已移除 {{count}} 個歸檔。`,failed:`無法清除歸檔。`}},archiveAutoPurge:{enableLabel:`自動清除舊歸檔`,enableDescription:`每天一次，將閾值內未列印的歸檔從清單中隱藏，並從磁碟中刪除其檔案。重新列印會重設計時器。`,ageLabel:`自動刪除最近未列印的歸檔：`,ageDescription:`最少 7 天，最多 10 年。基於最近一次列印完成 — 重新列印會重新整理年齡。刪除 3MF、縮圖、縮時攝影、原始 3MF、F3D 與照片。`,days:`天`,purgeStatsLabel:`同時從統計中移除`,purgeStatsDescription:`啟用後，每日清理任務還會將每個被清除的歸檔從 Quick Stats（耗材、時間、成本、能耗）中移除。預設關閉 — Quick Stats 會保留貢獻，僅檔案從磁碟刪除。`,runNow:`立即清除歸檔`,saveFailed:`無法儲存自動清除設定。`},cameraTokens:{title:`攝影機 API 權杖`,navTitle:`攝影機 API 權杖`,description:`長期權杖，用於將攝影機串流嵌入 Home Assistant、Frigate、資訊站或其他需要穩定 URL 的工具。每個權杖僅限攝影機串流，可隨時撤銷。`,loading:`載入中…`,confirmRevoke:{title:`撤銷此權杖？`,body:`使用「{{name}}」的任何裝置將立即失去存取權限。此操作無法復原。`,cancel:`取消`,confirm:`撤銷`},create:{title:`建立新權杖`,nameLabel:`權杖名稱`,namePlaceholder:`例如 Home Assistant`,daysLabel:`到期天數`,submit:`建立`,hint:`最大有效期 365 天。權杖值僅在建立時顯示一次 — 請立即複製。`},created:{title:`權杖已建立 — 立即複製`,warning:`這是此權杖唯一一次可見。關閉此對話框後您將無法再次查看。`,copy:`複製`,dismiss:`我已儲存`},list:{myTitle:`我的權杖`,allTitle:`所有使用者（管理員視圖）`,empty:`尚無權杖。`,name:`名稱`,owner:`擁有者`,prefix:`前綴`,created:`建立時間`,expires:`到期時間`,lastUsed:`最近使用`,revoke:`撤銷`,expired:`已過期`},toast:{created:`權杖已建立`,createFailed:`建立權杖失敗`,revoked:`權杖已撤銷`,revokeFailed:`撤銷權杖失敗`,loadFailed:`載入權杖失敗`,copied:`已複製到剪貼簿`,copyFailed:`複製失敗 — 手動選擇並複製`}},forecast:{title:`庫存預測`,noSpools:`未找到活躍的料卷。請將料卷新增至庫存以查看預測資料。`,noUsageData:`無可用使用資料 — 無法預測庫存時間線。`,sku:`SKU`,material:`材料`,stock:`庫存`,dailyRate:`消耗率`,daysLeft:`剩餘天數`,emptyBy:`耗盡日期`,reorderBy:`補貨截止日`,actions:`操作`,trend:`趨勢`,estimated:`估算`,noData:`無資料`,timeframe:`時間範圍`,chartTitle:`庫存預測 — 前5種材料`,dashedLinesROP:`虛線 = 再訂貨點`,stockLevel:`庫存量`,reorderPoint:`再訂購點`,safetyMargin:`安全餘量`,trendLegend:`趨勢（基於歷史，95%服務水準）`,estimatedLegend:`估算（重量差值）`,noDataLegend:`無資料`,ropLabel:`再訂貨點`,ssLabel:`安全庫存`,safetyStockLegend:`安全庫存`,stockArrivalLegend:`到貨`,stockoutLegend:`斷貨`,alertCount_one:`{{count}}條警告`,alertCount_other:`{{count}}條警告`,order:`訂購`,globalLeadTime:`全域交貨期`,globalLeadTimeHint:`全域交貨期下限 — 用於所有 SKU 的再訂購點計算`,save:`儲存`,cancel:`取消`,settingsSaved:`設定已儲存`,failedSaveSettings:`儲存設定失敗`,globalLeadTimeSaved:`全域提前期已儲存`,skuLeadTimeOverride:`SKU 交貨期覆蓋`,skuLeadTimeHint:`0 = 使用全域交貨期。設定 >0 以覆蓋此 SKU。`,safetyMarginLabel:`安全餘量`,effectiveLeadTime:`有效交貨期`,effectiveLeadTimeHint:`max(全域 {{global}}天, SKU {{sku}}天)`,reorderPointHint:`d̄ × LT + safety margin — 當庫存降至此水準時下單`,safetyMarginHint:`統計安全庫存 (z=1.65 × σ × √LT) + 使用者自訂緩衝`,safetyMarginHintDays:`在統計安全庫存基礎上額外增加的緩衝。{{approx}}`,safetyMarginHintDaysApprox:` ≈ 按當前速率 {{g}}g。`,safetyMarginHintG:`在統計安全庫存基礎上增加的固定重量緩衝。{{approx}}`,safetyMarginHintGApprox:` ≈ 按當前速率 {{days}}天。`,individualSpools:`單個料卷`,labelWeight:`標示重量`,spoolCount_one:`{{count}}個線軸`,spoolCount_other:`{{count}}個線軸`,stockBreakRisk:`斷貨風險`,stockBreakBefore:`補貨前庫存斷檔`,stockBreakDetail:`剩餘 {{days}} 天，交貨期 {{lt}} 天。`,reorderNow:`立即補貨`,reorderTriggerPassed:`觸發日期 {{date}} 已過。`,shoppingList:`購物清單`,shoppingListItems_one:`（{{count}}項）`,shoppingListItems_other:`（{{count}}項）`,shoppingListEmpty:`購物清單為空。點擊任意列的購物車圖示以新增商品。`,addToCart:`新增至購物清單`,alertsSnoozed:`靜音此SKU的提醒`,alertsEnabled:`啟用此SKU的提醒`,addedToCart:`已新增至購物清單`,failedAddItem:`新增項目失敗`,listView:`列表`,logisticsView:`物流`,qty:`數量`,weight:`重量`,leadTime:`交貨期`,expectedRestock:`預計補貨日期`,status:`狀態`,note:`備註`,pending:`待處理`,purchased:`已購買`,received:`已收貨`,markPurchased:`標記為已購買`,markReceived:`標記為已收貨 — 將料卷新增至庫存`,resetToPending:`重置為待處理`,remove:`移除`,clearAll:`清空`,downloadCsv:`CSV`,addToCartTitle:`新增至購物清單`,byQuantity:`依數量`,byDuration:`依時長`,numberOfSpools:`線軸數量`,lastHowManyDays:`需要持續多少天？`,noUsageQty:`無使用資料 — 數量已設為1。`,noteOptional:`備註（選填）`,notePlaceholder:`例如：用於專案X，緊急…`,addNSpools_one:`新增{{count}}個線軸`,addNSpools_other:`新增{{count}}個線軸`,onArrival:`到貨時`,stockBreakIn:`{{days}} 天後斷貨。`,stockRunsOutBefore:`庫存在 {{lt}} 天交貨期結束前耗盡。`,atRate:`按 {{rate}}g/天的速度，您需要`,moreSpools_one:`再{{count}}個線軸`,moreSpools_other:`再{{count}}個線軸`,bridgeGap:`來彌補缺口。`,noReadAccess:`您沒有查看庫存預測的權限。`,noWriteAccess:`您沒有修改預測設定的權限。`}}},tr:{translation:{nav:{printers:`Yazıcılar`,archives:`Arşivler`,queue:`Baskı Kuyruğu`,stats:`İstatistikler`,profiles:`Profiller`,maintenance:`Bakım`,projects:`Projeler`,inventory:`Filament`,files:`Dosya Yöneticisi`,makerworld:`MakerWorld`,notifications:`Bildirimler`,settings:`Ayarlar`,system:`Sistem`,collapseSidebar:`Kenar çubuğunu daralt`,expandSidebar:`Kenar çubuğunu genişlet`,update:`Güncelle`,updateAvailable:`Güncelleme mevcut: v{{version}}`,updateAvailableBanner:`{{version}} sürümü kullanılabilir!`,viewUpdate:`Güncellemeyi gör`,viewOnGithub:`GitHub'da gör`,keyboardShortcuts:`Klavye kısayolları (?)`,switchToLight:`Açık moda geç`,switchToDark:`Koyu moda geç`,switchToSystem:`Sistem moduna geç`,smartSwitches:`Akıllı Anahtarlar`,logout:`Çıkış`,installApp:`Uygulamayı yükle`,installAppSuccess:`Bambuddy yüklendi`},common:{save:`Kaydet`,saving:`Kaydediliyor...`,cancel:`İptal`,delete:`Sil`,edit:`Düzenle`,add:`Ekle`,close:`Kapat`,confirm:`Onayla`,loading:`Yükleniyor...`,error:`Hata`,errorLoading:`Veri yüklenirken hata`,retry:`Yeniden dene`,success:`Başarılı`,warning:`Uyarı`,enabled:`Etkin`,disabled:`Devre dışı`,yes:`Evet`,no:`Hayır`,on:`Açık`,off:`Kapalı`,all:`Tümü`,none:`Hiçbiri`,search:`Ara`,filter:`Filtrele`,sort:`Sırala`,refresh:`Yenile`,download:`İndir`,upload:`Yükle`,uploading:`Yükleniyor...`,uploadFailed:`Yükleme başarısız`,actions:`İşlemler`,status:`Durum`,name:`Ad`,description:`Açıklama`,date:`Tarih`,time:`Saat`,hours:`saat`,minutes:`dakika`,seconds:`saniye`,days:`gün`,enable:`Etkinleştir`,disable:`Devre dışı bırak`,permissions:`İzinler`,noPrinters:`Yapılandırılmış yazıcı yok`,noData:`Veri yok`,linkNotFound:`Bağlantı bulunamadı`,required:`Zorunlu`,optional:`İsteğe bağlı`,dismiss:`Kapat`,apply:`Uygula`,reset:`Sıfırla`,export:`Dışa aktar`,import:`İçe aktar`,clear:`Temizle`,selectAll:`Tümünü Seç`,deselectAll:`Seçimi Kaldır`,noChange:`— Değişiklik yok —`,unchanged:`Değişmedi`,unassigned:`Atanmamış`,unknown:`Bilinmiyor`,unknownError:`Bilinmeyen hata`,today:`Bugün`,tomorrow:`Yarın`,asap:`En kısa sürede`,overdue:`Gecikmiş`,now:`Şimdi`,collapse:`Daralt`,expand:`Genişlet`,viewArchive:`Arşivi gör`,viewInFileManager:`Dosya Yöneticisinde gör`,addedBy:`{{username}} tarafından eklendi`,prints:`baskı`,more:`+{{count}} daha`,ascending:`Artan`,descending:`Azalan`,back:`Geri`,copy:`Kopyala`,copied:`Kopyalandı!`,printer:`Yazıcı`,remove:`Kaldır`,type:`Tür`,print:`Baskı`,rename:`Yeniden adlandır`,move:`Taşı`,create:`Oluştur`,duplicate:`Çoğalt`,left:`Sol`,right:`Sağ`},printers:{title:`Yazıcılar`,addPrinter:`Yazıcı Ekle`,addPreflight:{checking:`Bağlantı kontrol ediliyor...`,warning:`Bazı bağlantı kontrolleri başarısız oldu. Bu yazıcı çevrimdışı olarak görünebilir. Aşağıdaki kontrolleri inceleyin, düzeltebileceklerinizi düzeltin veya yine de kaydedin.`,back:`Geri`,saveAnyway:`Yine de kaydet`},editPrinter:`Yazıcıyı Düzenle`,deletePrinter:`Yazıcıyı Sil`,printerName:`Yazıcı Adı`,serialNumber:`Seri Numarası`,ipAddress:`IP Adresi / Ana Bilgisayar Adı`,accessCode:`Erişim Kodu`,model:`Model`,nozzleCount:`Nozul Sayısı`,autoArchive:`Otomatik Arşivle`,status:{available:`Müsait`,idle:`Boşta`,printing:`Baskıda`,paused:`Duraklatıldı`,offline:`Çevrimdışı`,problem:`Sorun`,error:`Hata`,finished:`Tamamlandı`,unknown:`Bilinmiyor`},temperatures:{nozzle:`Nozul`,bed:`Tabla`,chamber:`Hazne`},heaterHistory:{title:`Isıtıcı Geçmişi`,openLabel:`Isıtıcı geçmişini görüntüle`,nozzle:`Nozul`,nozzle2:`Nozul 2`,bed:`Tabla`,chamber:`Hazne`,error:`Geçmiş yüklenemedi`,empty:`Henüz veri kaydedilmedi`},progress:`%{{percent}} tamamlandı`,timeRemaining:`{{time}} kaldı`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,maintenanceOk:`Bakım Tamam`,maintenanceWarning:`{{count}} uyarı`,maintenanceWarning_plural:`{{count}} uyarı`,maintenanceDue:`{{count}} bekliyor`,maintenanceDue_plural:`{{count}} bekliyor`,sort:{name:`Ad`,status:`Durum`,model:`Model`,location:`Konum`,eta:`Kalan süre`,ascending:`Artan sırala`,descending:`Azalan sırala`},cardSize:{small:`Küçük kartlar`,medium:`Orta kartlar`,large:`Büyük kartlar`,extraLarge:`Çok büyük kartlar`},hideOffline:`Çevrimdışı olanları gizle`,nextAvailable:`Sıradaki müsait`,powerOn:`Aç`,offlinePrintersWithPlugs:`Akıllı prizli çevrimdışı yazıcılar`,noPrintersConfigured:`Henüz yapılandırılmış yazıcı yok`,search:`Yazıcı ara...`,noSearchResults:`Aramanıza veya filtrelerinize uyan yazıcı yok`,filter:{allStatuses:`Tüm durumlar`,allLocations:`Tüm konumlar`},toolbar:{filters:`Filtreler`,view:`Görünüm`,actions:`İşlemler`},readyToPrint:`Baskıya hazır`,external:`Harici`,extL:`Ext-L`,extR:`Ext-R`,deleteArchives:`Baskı arşivlerini sil`,noLabel:`Etiket yok`,printPreview:`Baskı önizleme`,width:`Genişlik`,height:`Yükseklik`,noObjectsFound:`Nesne bulunamadı`,objectsLoadedOnPrintStart:`Nesneler baskı başladığında yüklenir`,willBeSkipped:`Atlanacak`,name:`Ad`,serialCannotBeChanged:`Seri numarası değiştirilemez`,locationHelp:`Yazıcıları gruplamak ve kuyruk işlerini filtrelemek için kullanılır`,wifiSignal:{veryWeak:`Çok zayıf`,weak:`Zayıf`,fair:`Orta`,good:`İyi`,excellent:`Mükemmel`},maintenanceUpToDate:`Tüm bakım güncel - Görüntülemek için tıklayın`,maintenance:{title:`Bakımda`,subtitle:`Bu yazıcı duraklatıldı — bağlı değil, kuyruğa uygun değil, bildirim göndermiyor.`,pillLabel:`Bakım`,exitButton:`Bakımdan çık`,menuEnter:`Bakım moduna gir`,menuExit:`Bakım modundan çık`,toastEntered:`{{name}} artık bakım modunda`,toastExited:`{{name}} tekrar çevrimiçi`,confirmMidPrintTitle:`Yazdırma sırasında bakım moduna geçilsin mi?`,confirmMidPrintMessage:`{{name}} şu anda yazdırıyor. Bakım moduna geçmek MQTT bağlantısını kesecek ve bu iş için ilerleme takibi ile tamamlanma bildirimlerini durduracak. Devam edilsin mi?`,editFieldLabel:`Bakım modu`,editFieldHelp:`Etkinleştirildiğinde, bu yazıcı MQTT, kuyruk gönderimi ve bildirimlerden duraklatılır — tamir, paralel Bambuddy kurulumları veya geçici askıya alma için kullanışlıdır.`},chamberLightOn:`Hazne ışığını aç`,chamberLightOff:`Hazne ışığını kapat`,files:`Dosyalar`,browseFiles:`Yazıcı dosyalarına göz at`,autoOffAfterPrint:`Baskı sonrası otomatik kapat`,autoOffExecuted:`Otomatik kapama uygulandı - sıfırlamak için yazıcıyı açın`,hmsErrors:`HMS Hataları`,viewHmsErrors:`{{count}} HMS hatasını gör`,resume:`Devam Et`,pause:`Duraklat`,stop:`Durdur`,camera:`Kamera`,skipObject:`Nesneyi Atla`,reconnect:`Yeniden Bağlan`,forceRefresh:`Zorla Yenile`,forceRefreshSuccess:`Yenileme istendi`,mqttDebug:`MQTT Hata Ayıklama`,printerInformation:`Yazıcı Bilgisi`,copyToClipboard:`Kopyala`,copied:`Kopyalandı!`,state:`Durum`,wifiSignalLabel:`WiFi Sinyali`,developerMode:`Geliştirici Modu`,enabled:`Etkin`,disabled:`Devre dışı`,addedOn:`Eklendi`,sdCard:`SD Kart`,inserted:`Takılı`,notInserted:`Takılı değil`,totalPrintHours:`Baskı Saatleri`,activeNozzle:`Aktif: {{nozzle}} nozul`,nozzleRack:`Nozul Rafı`,nozzleDocked:`Yuvalanmış`,nozzleMounted:`Takılı`,nozzleActive:`Aktif`,nozzleIdle:`Boşta`,nozzleDiameter:`Çap`,nozzleType:`Tür`,nozzleStatus:`Durum`,nozzleFilament:`Filament`,nozzleWear:`Aşınma`,nozzleMaxTemp:`Maks. Sıcaklık`,nozzleSerial:`Seri`,nozzleHardenedSteel:`Sertleştirilmiş Çelik`,nozzleStainlessSteel:`Paslanmaz Çelik`,nozzleTungstenCarbide:`Tungsten Karbür`,nozzleFlow:`Akış`,nozzleHighFlow:`Yüksek Akış`,nozzleStandardFlow:`Standart`,firmwareUpdate:`Firmware Güncellemesi`,firmwareInstructions:`Yazıcının dokunmatik ekranında şuraya gidin:`,firmwareNav:`Şuraya gidin`,settings:`Ayarlar`,firmware:`Firmware`,discoverPrinters:`Yazıcıları Keşfet`,searching:`Aranıyor...`,manualEntry:`Manuel Giriş`,addFromCloud:`Bulut'tan Ekle`,toast:{printerDeleted:`Yazıcı silindi`,missingSpoolAssignment:`{{printer}} üzerinde baskı başladı. Şunlar için eksik makara ataması: {{slots}}`,printerAdded:`Yazıcı eklendi`,printerUpdated:`Yazıcı güncellendi`,failedToDelete:`Yazıcı silinemedi`,failedToAdd:`Yazıcı eklenemedi`,connectionFailedNotAdded:`Yazıcıya bağlanılamadı. IP, seri numarası ve erişim kodunu doğrulayın ve yalnızca LAN modunun açık olduğunu onaylayın. Yazıcı eklenmedi.`,failedToUpdate:`Yazıcı güncellenemedi`,commandSent:`Komut gönderildi`,failedToSendCommand:`Komut gönderilemedi`,turnedOn:`{{name}} açıldı`,failedToPowerOn:`{{name}} açılamadı`,scriptTriggered:`Betik tetiklendi`,printStopped:`Baskı durduruldu`,printPaused:`Baskı duraklatıldı`,printResumed:`Baskıya devam edildi`,referenceDeleted:`Referans silindi`,detectionAreaSaved:`Algılama alanı kaydedildi`,failedToRunScript:`Betik çalıştırılamadı`,failedToStopPrint:`Baskı durdurulamadı`,failedToPausePrint:`Baskı duraklatılamadı`,failedToResumePrint:`Baskıya devam edilemedi`,failedToControlChamberLight:`Hazne ışığı kontrol edilemedi`,failedToSetSpeed:`Baskı hızı ayarlanamadı`,failedToUpdateSetting:`Ayar güncellenemedi`,failedToSkipObjects:`Nesneler atlanamadı`,failedToRereadRfid:`RFID yeniden okunamadı`,failedToCheckPlate:`Plaka kontrol edilemedi`,failedToUpdateLabel:`Etiket güncellenemedi`,failedToDeleteReference:`Referans silinemedi`,failedToSaveDetectionArea:`Algılama alanı kaydedilemedi`,plateCheckEnabled:`Plaka kontrolü etkinleştirildi`,plateCheckDisabled:`Plaka kontrolü devre dışı bırakıldı`,calibrationSaved:`Kalibrasyon kaydedildi!`,calibrationFailed:`Kalibrasyon başarısız`,rfidRereadInitiated:`RFID yeniden okuma başlatıldı`,loadInitiated:`Filament yükleniyor…`,unloadInitiated:`Filament çıkarılıyor…`,failedToLoad:`Filament yüklenemedi`,failedToUnload:`Filament çıkarılamadı`},connection:{connected:`Bağlı`,offline:`Çevrimdışı`},plateStatus:{markCleared:`Plakayı temizlendi olarak işaretle`,cleared:`Plaka Temiz`,notCleared:`Plaka Temiz Değil`,inUse:`Plaka Kullanımda`},queue:{inQueue:`Kuyrukta {{count}} baskı`,inQueue_plural:`Kuyrukta {{count}} baskı`},controls:`Kontroller`,rfid:{reread:`RFID'yi yeniden oku`},ams:{load:`Yükle`,unload:`Çıkar`},bedJog:{title:`Jog kontrolleri`,bed:`Tabla`,step:`Adım (mm)`,up:`Plakayı yukarı hareket ettir`,down:`Plakayı aşağı hareket ettir`,disabledWhilePrinting:`Baskı sırasında devre dışı`,notHomedTitle:`Yazıcı sıfırlanmamış`,notHomedMessage:`Yazıcı son baskıdan bu yana sıfırlanmadı. Güvenli konumlandırma için önce otomatik sıfırlamayı çalıştırın (kafayı park eder, ardından X, Y ve Z sıfırlanır) veya yine de hareket ettirin — yazılım son durakları atlanır.`,homeZ:`Otomatik Sıfırla`,moveAnyway:`Yine de hareket ettir`,homingStarted:`Yazıcı otomatik sıfırlanıyor…`},permission:{noAdd:`Yazıcı eklemek için izniniz yok`,noEdit:`Yazıcıları düzenlemek için izniniz yok`,noDelete:`Yazıcıları silmek için izniniz yok`,noControl:`Yazıcıları kontrol etmek için izniniz yok`,noFiles:`Yazıcı dosyalarına erişim izniniz yok`,noAmsRfid:`AMS RFID'yi yeniden okumak için izniniz yok`,noSmartPlugControl:`Akıllı prizleri kontrol etme izniniz yok`,noCamera:`Kameraları görüntüleme izniniz yok`},modal:{addTitle:`Yazıcı Ekle`,editTitle:`Yazıcıyı Düzenle`,myPrinter:`Yazıcım`,selectModel:`Model seç...`,locationGroup:`Konum / Grup (isteğe bağlı)`,locationPlaceholder:`örn., Atölye, Ofis, Bodrum`,autoArchiveLabel:`Tamamlanan baskıları otomatik arşivle`,fromPrinterSettings:`Yazıcı ayarlarından`,modelOptional:`Model (isteğe bağlı)`,saveChanges:`Değişiklikleri Kaydet`},skipObjects:{tooltip:`Nesneleri atla`,onlyWhilePrinting:`Nesneleri atla (yalnızca baskı sırasında)`,requiresMultiple:`Nesneleri atla (2+ nesne gerektirir)`,title:`Nesneleri Atla`,matchIdsInfo:`ID'leri yazıcı ekranınızla eşleştirin`,printerShowsIds:`Yazıcı ekranı baskı plakasındaki nesne ID'lerini gösterir`,skipSelected:`Seçilenleri Atla`,skipping:`Atlanıyor...`,noObjectsSelected:`Hiçbir nesne seçilmedi`,selectObjectsToSkip:`Mevcut baskıdan atlamak istediğiniz nesneleri seçin`,skipped:`atlandı`,objectsSkipped:`Nesneler atlandı`,activeCount:`{{count}} aktif`,waitForLayer:`Nesneleri atlamak için 2+ katmanı bekleyin (şu an katman {{layer}})`,skip:`Atla`,confirmTitle:`Nesne Atlansın mı?`,confirmMessage:`"{{name}}" atlamak istediğinizden emin misiniz? Bu geri alınamaz.`},confirm:{deleteTitle:`Yazıcıyı Sil`,deleteMessage:`"{{name}}" silmek istediğinizden emin misiniz? Bu, tüm bağlantı ayarlarını kaldıracak.`,deleteArchivesNote:`Bu yazıcı için tüm baskı geçmişi kalıcı olarak silinecek.`,keepArchivesNote:`Baskı geçmişi saklanacak ancak artık bu yazıcıyla ilişkilendirilmeyecek.`,stopTitle:`Baskıyı Durdur`,stopMessage:`"{{name}}" üzerindeki mevcut baskıyı durdurmak istediğinizden emin misiniz? Bu, baskı işini iptal edecek.`,stopButton:`Baskıyı Durdur`,pauseTitle:`Baskıyı Duraklat`,pauseMessage:`"{{name}}" üzerindeki mevcut baskıyı duraklatmak istediğinizden emin misiniz?`,pauseButton:`Baskıyı Duraklat`,resumeTitle:`Baskıya Devam Et`,resumeMessage:`"{{name}}" üzerindeki baskıya devam etmek istediğinizden emin misiniz?`,resumeButton:`Baskıya Devam Et`,powerOnTitle:`Yazıcıyı Aç`,powerOnMessage:`"{{name}}" için gücü AÇMAK istediğinizden emin misiniz?`,powerOnButton:`Aç`,powerOffTitle:`Yazıcıyı Kapat`,powerOffMessage:`"{{name}}" için gücü KAPATMAK istediğinizden emin misiniz?`,powerOffWarning:`UYARI: "{{name}}" şu anda baskı yapıyor! Gücü KAPATMAK istediğinizden emin misiniz? Bu, baskıyı kesintiye uğratacak ve yazıcıya zarar verebilir.`,powerOffButton:`Kapat`,haToggleTitle:`"{{name}}" Aç/Kapat`,haToggleMessage:`Home Assistant varlığı {{entity}} açılıp kapatılsın mı? Şu anda açıksa güç kesilebilir.`,haToggleWarning:`UYARI: "{{name}}" şu anda baskı yapıyor! {{entity}} açılıp kapatılması gücü kesip baskıyı kesintiye uğratabilir. Devam edilsin mi?`,haToggleButton:`Aç/Kapat`},bulk:{select:`Seç`,selectAll:`Tümünü Seç`,selectByLocation:`Konuma Göre Seç`,selected:`{{count}} seçildi`,actions:{stop:`Durdur`,pause:`Duraklat`,resume:`Devam Et`,clearPlate:`Tablayı Temizle`,clearHMS:`Bildirimleri Temizle`},confirm:{stopTitle:`{{count}} Baskıyı Durdur`,stopMessage:`Bu, {{count}} yazıcı üzerindeki aktif baskıları iptal edecek. Bu işlem geri alınamaz.`,stopButton:`Hepsini Durdur`,pauseTitle:`{{count}} Baskıyı Duraklat`,pauseMessage:`Bu, {{count}} yazıcı üzerindeki aktif baskıları duraklatacak.`,pauseButton:`Hepsini Duraklat`,clearPlateTitle:`{{count}} Baskı Tablasını Temizle`,clearPlateMessage:`Bu, {{count}} yazıcının baskı tablasını temizleyecek ve kuyruktaki işleri tetikleyebilir.`,clearPlateButton:`Hepsini Temizle`},success:`{{count}} yazıcı üzerinde {{action}} tamamlandı`,partial:`{{succeeded}} başarılı, {{failed}} başarısız`,noneApplicable:`Seçilen yazıcılar bu işlem için doğru durumda değil`,selectByState:`Duruma Göre Seç`},discovery:{title:`Yazıcıları Keşfet`,searching:`Aranıyor...`,scanning:`Taranıyor...`,scanProgress:`Taranıyor... {{scanned}}/{{total}}`,foundPrinters:`{{count}} yazıcı bulundu`,noPrintersFound:`Yazıcı bulunamadı`,noPrintersFoundSubnet:`Belirtilen alt ağda yazıcı bulunamadı.`,noPrintersFoundNetwork:`Ağda yazıcı bulunamadı.`,allConfigured:`Keşfedilen tüm yazıcılar zaten yapılandırılmış.`,alreadyAdded:`Zaten eklendi`,select:`Seç`,manualEntry:`Manuel Giriş`,addFromCloud:`Bulut'tan Ekle`,subnetToScan:`Taranacak alt ağ`,dockerNote:`Docker algılandı. Yazıcınızın alt ağını CIDR gösteriminde girin. docker-compose.yml'de network_mode: host gerektirir.`,scanSubnet:`Yazıcılar için Alt Ağı Tara`,discoverNetwork:`Ağda Yazıcıları Keşfet`,scanningSubnet:`Bambu yazıcıları için alt ağ taranıyor...`,scanningNetwork:`Ağ taranıyor...`,serialRequired:`Seri numarası gerekli`,unknown:`Bilinmiyor`,failedToStart:`Keşif başlatılamadı`,customSubnetOption:`Özel alt ağ...`,customSubnetLabel:`Özel alt ağ (CIDR)`,customSubnetNote:`Yazıcınız bu sunucudan farklı bir ağda ise özel bir alt ağ kullanın. FTP (990) ve MQTT (8883) bağlantı noktaları yönlendirme sınırı boyunca erişilebilir olmalıdır.`},drying:{start:`Kurutmayı Başlat`,stop:`Kurutmayı Durdur`,temperature:`Sıcaklık`,duration:`Süre`,hours:`saat`,timeRemaining:`{{time}} kaldı`,active:`Kurutuluyor`,notSupported:`Kurutma desteklenmiyor`,powerRequired:`Kurutmayı etkinleştirmek için AMS güç adaptörünü bağlayın`,startingDrying:`Kurutma başlatılıyor...`,stoppingDrying:`Kurutma durduruluyor...`,rotateTray:`Kurutma sırasında makarayı döndür`},amsBackup:{titleOn:`AMS Filament Backup AÇIK. Devre dışı bırakmak için tıklayın.`,titleOff:`AMS Filament Backup KAPALI. Etkinleştirmek için tıklayın.`,titleUnknown:`Bu yazıcıda AMS Filament Backup durumu kullanılamıyor.`,toastEnabled:`AMS Filament Backup etkinleştirildi`,toastDisabled:`AMS Filament Backup devre dışı bırakıldı`,modalTitle:`AMS Filament Backup`,modalHelp:`Aktif slot tükendiğinde, yazıcı aynı ön ayar ve renkteki slotları bu sırayla dolaşır.`,modalNoSlots:`Yüklenmiş filament yok.`,modalNoPairs:`Yedek çifti yok — hiçbir slot çifti aynı ön ayar ve rengi paylaşmıyor.`,extruderRightShort:`S`,extruderLeftShort:`L`,stateOn:`Etkin`,stateOff:`Devre dışı`,stateUnknown:`Bu yazıcıda desteklenmiyor`},activeJobSlot:{title:`Bu slot, aktif baskıdaki {{n}} numaralı filament`,ariaLabel:`Aktif baskı slotu {{n}}`},filaments:`Filamentler`,openCameraOverlay:`Kamera bindirmesini aç`,openCameraWindow:`Kamerayı yeni pencerede aç`,firmwareUpdateAvailable:`Firmware güncellemesi mevcut: {{current}} → {{latest}}`,firmwareUpToDate:`Firmware {{version}} — Güncel`,firmwareUpdateButton:`Güncelle`,plateDetection:{noPermission:`Yazıcıları güncellemek için izniniz yok`,enabledClick:`Plaka kontrolü etkin - Devre dışı bırakmak için tıklayın`,disabledClick:`Plaka kontrolü devre dışı - Etkinleştirmek için tıklayın`,manageCalibration:`Plaka algılama kalibrasyonunu yönet`,calibrationRequired:`Kalibrasyon Gerekli`,calibrationInstructions:`Lütfen baskı plakasının tamamen boş olduğundan emin olun, ardından Kalibre Et'e tıklayın.`,calibrationDescription:`Kalibrasyon, boş plakanın referans görüntüsünü yakalar. Gelecekteki kontroller, nesneleri algılamak için bu referansa karşı karşılaştırılır.`,calibrationTip:`İpucu: Farklı plakalar için 5 kalibrasyona kadar saklayabilirsiniz. Sistem, kontrol sırasında en iyi eşleşmeyi otomatik olarak kullanır.`,plateEmpty:`Plaka boş görünüyor`,objectsDetected:`Plakada nesneler algılandı`,confidence:`Güven`,difference:`Fark`,analysisPreview:`Analiz önizlemesi:`,analysisLegend:`Yeşil kutu = algılama alanı, Kırmızı kaplama = kalibrasyondan farklar`,savedReferences:`Kaydedilen Referanslar ({{count}}/{{max}})`,deleteReference:`Referansı sil`,labelPlaceholder:`Etiket...`,clickToEdit:`{{label}} - Düzenlemek için tıklayın`,clickToAddLabel:`Etiket eklemek için tıklayın`},speed:{title:`Baskı Hızı`,silent:`Sessiz (%50)`,standard:`Standart (%100)`,sport:`Spor (%124)`,ludicrous:`Çılgın (%166)`},airduct:{title:`Hava Kanalı Modu`,cooling:`Soğutma`,heating:`Isıtma`},noSdCard:`SD Yok`,door:{open:`Açık`,closed:`Kapalı`},fans:{partCooling:`Parça Soğutma Fanı`,auxiliary:`Yardımcı Fan`,chamber:`Hazne Fanı`},clickToViewHmsErrors:`HMS hatalarını görüntülemek için tıklayın`,estimatedCompletion:`Tahmini tamamlanma süresi`,plateNumber:`Plaka {{number}}`,slotOptions:`Yuva seçenekleri`,amsPopup:{friendlyName:`AMS Adı`,friendlyNamePlaceholder:`örn. AMS Kolay Adı`,serialNumber:`Seri Numarası`,firmwareVersion:`Firmware`,save:`Kaydet`,clear:`Temizle`,noEditPermission:`AMS birimlerini yeniden adlandırma izniniz yok`},firmwareModal:{title:`Firmware Güncellemesi`,titleUpToDate:`Firmware Bilgisi`,currentVersion:`Mevcut:`,latestVersion:`En son:`,releaseNotes:`Sürüm Notları`,checkingPrereqs:`Önkoşullar kontrol ediliyor...`,sdCardReady:`SD kart hazır. Firmware yüklemek için aşağıya tıklayın.`,uploadedSuccess:`Firmware SD karta yüklendi!`,applyInstructions:`Güncellemeyi yazıcınıza uygulamak için:`,step1:`Yazıcının dokunmatik ekranında Ayarlar'a gidin`,step2:`Firmware'e gidin`,step3:`SD karttan güncelle'yi seçin`,step4:`Güncelleme 10-20 dakika sürer`,done:`Tamam`,starting:`Başlatılıyor...`,uploadFirmware:`Firmware Yükle`,uploadFailed:`Yükleme başlatılamadı: {{error}}`,uploadedToast:`Firmware yüklendi! Güncellemeyi yazıcı ekranından tetikleyin.`,availableVersions:`Kullanılabilir sürümler`,usable:`Kullanılabilir`,unavailable:`Kullanılamaz`,installed:`Yüklü`,newerBadge:`daha yeni`,olderBadge:`daha eski`,currentBadge:`mevcut`},accessCodePlaceholder:`Mevcut olanı korumak için boş bırakın`,roi:{title:`Algılama Alanı (ROI)`,xStart:`X Başlangıç`,yStart:`Y Başlangıç`,width:`Genişlik`,height:`Yükseklik`,instruction:`Baskı plakasına odaklanmak için algılama alanını ayarlayın. Önizlemedeki yeşil kutu mevcut alanı gösterir.`},developerModeWarning:`Geliştirici LAN modu şunlarda etkin değil: {{names}}. Bazı özellikler çalışmayabilir.`,howToEnable:`Nasıl etkinleştirilir`,incompatibleFile:`Bu dosya {{slicedFor}} için dilimlendi, ancak bu yazıcı bir {{printerModel}}`,dropNotPrintable:`Yalnızca .gcode ve .gcode.3mf dosyaları yazdırılabilir`,dropToPrint:`Yazdırmak için bırakın`,cannotPrint:`Yazıcı meşgul`},archives:{title:`Baskı Arşivleri`,no3mfBanner:{title:`Bazı son baskılar küçük resimlerle birlikte arşivlenemedi`,body:`Dilimleyici yazıcının SD kartına .gcode.3mf dosyasını bırakmadı, bu nedenle Bambuddy küçük resmi veya dilimleyici meta verilerini alamadı. Bu genellikle dilimleyicide (Bambu Studio / OrcaSlicer'in Cihaz sekmesi) "Gönderilen dosyaları harici depolamada sakla" seçeneğinin kapalı olmasından kaynaklanır.`,docsLink:`Kurulum adımı 4'ü görüntüle`,dismissLabel:`Bu bildirimi kapat`},searchPlaceholder:`Arşivlerde ara...`,filterByPrinter:`Yazıcıya göre filtrele`,filterByStatus:`Duruma göre filtrele`,sortBy:`Sıralama`,sortNewest:`Önce en yeni`,sortOldest:`Önce en eski`,sortName:`Ad`,sortDuration:`Süre`,sortLargest:`Önce en büyük`,sortSmallest:`Önce en küçük`,sortSize:`Boyut`,noArchives:`Arşiv bulunamadı`,noArchivesSearch:`Aramanızla eşleşen arşiv yok`,originalPrintNotVisible:`Orijinal baskı görünmüyor - filtreleri temizlemeyi deneyin`,noArchivesYet:`Henüz arşiv yok`,prints:`baskı`,pagination:{showing:`Gösterilen`,to:`-`,of:`/`,show:`Göster`,page:`Sayfa`,all:`Tümü`},loadingArchives:`Arşivler yükleniyor...`,releaseToUpload:`Yüklemek için bırakın`,showAll:`Tümünü göster`,showFavoritesOnly:`Yalnızca favorileri göster`,gridView:`Izgara görünümü`,listView:`Liste görünümü`,calendarView:`Takvim görünümü`,logView:`Baskı Günlüğü`,manageTags:`Etiketleri Yönet`,showFailedPrints:`Başarısız baskıları göster`,hideFailedPrints:`Başarısız baskıları gizle`,hideDuplicates:`Tekrarları Gizle`,viewOriginalPrint:`Orijinal baskıyı görüntülemek için tıklayın (#{{id}})`,printTime:`Baskı Süresi`,filamentUsed:`Kullanılan Filament`,cost:`Maliyet`,reprint:`Tekrar Yazdır`,preview:`Önizleme`,deleteArchive:`Arşivi Sil`,deleteConfirm:`Bu arşivi silmek istediğinizden emin misiniz?`,favorite:`Favori`,unfavorite:`Favorilerden kaldır`,viewDetails:`Detayları Görüntüle`,status:{completed:`Tamamlandı`,failed:`Başarısız`,stopped:`Durduruldu`},toast:{source3mfAttached:`Kaynak 3MF eklendi: {{filename}}`,failedUploadSource3mf:`Kaynak 3MF yüklenemedi`,source3mfRemoved:`Kaynak 3MF kaldırıldı`,failedRemoveSource3mf:`Kaynak 3MF kaldırılamadı`,f3dAttached:`F3D eklendi: {{filename}}`,failedUploadF3d:`F3D yüklenemedi`,f3dRemoved:`F3D kaldırıldı`,failedRemoveF3d:`F3D kaldırılamadı`,timelapseAttached:`Zaman atlamalı video eklendi: {{filename}}`,timelapseAlreadyAttached:`Zaman atlamalı video zaten eklendi`,noMatchingTimelapse:`Eşleşen zaman atlamalı video bulunamadı`,failedScanTimelapse:`Zaman atlamalı video taranamadı`,failedAttachTimelapse:`Zaman atlamalı video eklenemedi`,timelapseRemoved:`Zaman atlamalı video kaldırıldı`,failedRemoveTimelapse:`Zaman atlamalı video kaldırılamadı`,timelapseUploaded:`Zaman atlamalı video yüklendi: {{filename}}`,failedUploadTimelapse:`Zaman atlamalı video yüklenemedi`,archiveDeleted:`Arşiv silindi`,failedDeleteArchive:`Arşiv silinemedi`,addedToFavorites:`Favorilere eklendi`,removedFromFavorites:`Favorilerden kaldırıldı`,projectUpdated:`Proje güncellendi`,failedUpdateProject:`Proje güncellenemedi`,linkCopied:`Bağlantı panoya kopyalandı`,failedCopyLink:`Bağlantı kopyalanamadı`,photoDeleted:`Fotoğraf silindi`,failedDeletePhoto:`Fotoğraf silinemedi`,failedDeleteArchives:`Arşivler silinemedi`,failedUpdateFavorites:`Favoriler güncellenemedi`,exportDownloaded:`Dışa aktarma indirildi`,exportFailed:`Dışa aktarma başarısız`},menu:{print:`Yazdır`,schedule:`Zamanla`,openInBambuStudio:`Dilimleyicide Aç`,slice:`Dilimle`,externalLink:`Harici Bağlantı`,viewOnMakerWorld:`MakerWorld'de Görüntüle`,preview3d:`3B Önizleme`,viewTimelapse:`Zaman Atlamalı Videoyu Görüntüle`,scanForTimelapse:`Zaman Atlamalı Video Tara`,uploadTimelapse:`Zaman Atlamalı Video Yükle`,removeTimelapse:`Zaman Atlamalı Videoyu Kaldır`,downloadSource3mf:`Kaynak 3MF İndir`,uploadSource3mf:`Kaynak 3MF Yükle`,replaceSource3mf:`Kaynak 3MF Değiştir`,removeSource3mf:`Kaynak 3MF Kaldır`,uploadF3d:`F3D Yükle`,replaceF3d:`F3D Değiştir`,downloadF3d:`F3D İndir`,removeF3d:`F3D Kaldır`,download:`İndir`,copyDownloadLink:`İndirme Bağlantısını Kopyala`,qrCode:`QR Kod`,viewPhotos:`Fotoğrafları Görüntüle`,viewPhotosCount:`Fotoğrafları Görüntüle ({{count}})`,projectPage:`Proje Sayfası`,addToFavorites:`Favorilere Ekle`,removeFromFavorites:`Favorilerden Kaldır`,edit:`Düzenle`,printLog:`Baskı Günlüğü`,goToProject:`Projeye Git: {{name}}`,addToProject:`Projeye Ekle`,removeFromProject:`Projeden Kaldır`,loading:`Yükleniyor...`,noProjectsAvailable:`Kullanılabilir proje yok`,searchProjects:`Projelerde ara…`,select:`Seç`,deselect:`Seçimi Kaldır`,delete:`Sil`},permission:{noReprint:`Bu arşivi yeniden yazdırma izniniz yok`,noAddToQueue:`Kuyruğa ekleme izniniz yok`,noUpdateArchives:`Arşivleri güncelleme izniniz yok`,noUploadFiles:`Dosya yükleme izniniz yok`,noDownload:`Arşivleri indirme izniniz yok`,noCopyLink:`İndirme bağlantılarını kopyalama izniniz yok`,noDelete:`Bu arşivi silme izniniz yok`,noEdit:`Bu girişi düzenleme izniniz yok`,noCreate:`Arşiv oluşturma izniniz yok`},platePicker:{title:`Önizleme için plaka seçin`,hint:`Bu arşivde birden fazla plaka var. GCode görüntüleyicide açmak için birini seçin.`,plateLabel:`Plaka {{index}}`,objectCount:`{{count}} nesne`,objectCount_plural:`{{count}} nesne`,noGcode:`Bu arşivin önizleme için dilimlenmiş G-kodu yok. Önce dilimlemek için Bambu Studio'da açın.`},card:{previousPlate:`Önceki plaka`,nextPlate:`Sonraki plaka`,plateNumber:`Plaka {{index}}`,moreOptions:`Daha fazla seçenek için sağ tıklayın`,addToFavorites:`Favorilere ekle`,removeFromFavorites:`Favorilerden kaldır`,cancelled:`iptal edildi`,failed:`başarısız`,duplicate:`tekrar`,duplicateTitle:`Bu model daha önce yazdırıldı`,openSource3mf:`Kaynak 3MF'yi Bambu Studio'da aç (daha fazla seçenek için sağ tıklayın)`,downloadF3d:`Fusion 360 tasarım dosyasını indir`,viewTimelapse:`Zaman atlamalı videoyu görüntüle`,viewPhoto:`1 fotoğrafı görüntüle`,viewPhotos:`{{count}} fotoğrafı görüntüle`,openFolder:`Klasörü aç: {{name}}`,slicedFile:`Dilimlenmiş dosya - yazdırmaya hazır`,sourceFile:`Yalnızca kaynak dosya - AMS eşlemesi mevcut değil`,gcode:`GCODE`,source:`KAYNAK`,project:`Proje: {{name}}`,runsBadge:`{{count}} baskı`,runsBadgeTitle:`Toplam {{count}} baskı — {{successful}} başarılı, {{failed}} başarısız. Tam baskı günlüğünü görmek için tıklayın.`,estimated:`Tahmini: {{time}}`,actual:`Gerçek: {{time}}`,accuracy:`Doğruluk: %{{percent}}`,filament:`{{weight}}g`,layer:`{{count}} katman`,layers:`{{count}} katman`,object:`{{count}} nesne`,objects:`{{count}} nesne`,slicedFor:`{{model}} için dilimlendi`,uploadedBy:`Yükleyen`,noPermissionReprint:`Yeniden yazdırma izniniz yok`,noFileForReprint:`Kullanılabilir 3MF dosyası yok — baskı kaydedildiğinde dosya yazıcıdan indirilemedi`,noPermissionEdit:`Arşivleri düzenleme izniniz yok`,noPermissionDelete:`Arşivleri silme izniniz yok`,reprint:`Tekrar Yazdır`,schedulePrint:`Baskıyı Zamanla`,schedule:`Zamanla`,openInBambuStudio:`Dilimleyicide Aç`,openInBambuStudioToSlice:`Dilimlemek için Dilimleyicide Aç`,slice:`Dilimle`,externalLink:`Harici Bağlantı`,makerWorld:`MakerWorld: {{designer}}`,viewProject:`Projeyi görüntüle`,noExternalLink:`Harici bağlantı yok`,preview3d:`3B Önizleme`,download:`İndir`,edit:`Düzenle`,delete:`Sil`},runLog:{title:`Baskı Günlüğü`,modalTitle:`Baskı Günlüğü — {{name}}`,modalTitleFallback:`bu arşiv`,empty:`Bu arşiv için henüz baskı olayı kaydedilmedi.`,col:{date:`Tarih`,status:`Durum`,duration:`Süre`,filament:`Filament`,cost:`Maliyet`},status:{completed:`Tamamlandı`,failed:`Başarısız`,cancelled:`İptal edildi`,stopped:`Durduruldu`,skipped:`Atlandı`,printing:`Yazdırılıyor`}},modal:{deleteArchive:`Arşivi Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.`,deleteButton:`Sil`,deletePurgeStats:`Ayrıca bu baskıyı Hızlı İstatistiklerden de kaldır (filament, süre, maliyet, enerji)`,deleteQueueItemsWarning:`Bu arşive bağlı {{count}} kuyruk öğesi de kaldırılacak.`,deleteBlockedByPrinting:`Silinemiyor — {{count}} kuyruk öğesi şu anda yazdırılıyor. Önce yazdırmayı durdurun, ardından tekrar deneyin.`,removeSource3mf:`Kaynak 3MF Kaldır`,removeSource3mfConfirm:`"{{name}}" dosyasından kaynak 3MF dosyasını kaldırmak istediğinizden emin misiniz? Bu, orijinal dilimleyici proje dosyasını silecek.`,removeButton:`Kaldır`,removeF3d:`F3D Kaldır`,removeF3dConfirm:`"{{name}}" dosyasından Fusion 360 tasarım dosyasını kaldırmak istediğinizden emin misiniz?`,removeTimelapse:`Zaman Atlamalı Videoyu Kaldır`,removeTimelapseConfirm:`"{{name}}" dosyasından zaman atlamalı videoyu kaldırmak istediğinizden emin misiniz?`,timelapse:`{{name}} - Zaman Atlamalı Video`,selectTimelapse:`Zaman Atlamalı Video Seç`,selectTimelapseDesc:`Otomatik eşleşme bulunamadı. Bu baskı için zaman atlamalı videoyu seçin:`,deleteArchives:`Arşivleri Sil`,deleteArchivesConfirm:`{{count}} arşivi silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.`,deleteCount:`{{count}} Sil`},page:{title:`Arşivler`,printsCount:`{{total}} baskıdan {{filtered}} tanesi`,dropFilesHere:`.3mf dosyalarını buraya bırakın`,releaseToUpload:`Yüklemek için bırakın`,only3mfSupported:`Yalnızca .3mf dosyaları desteklenir`,close:`Kapat`,selected:`{{count}} seçildi`,selectAll:`Tümünü Seç`,tags:`Etiketler`,project:`Proje`,favorite:`Favori`,delete:`Sil`,toggledFavorites:`{{count}} arşiv için favoriler değiştirildi`,failedUpdateFavorites:`Favoriler güncellenemedi`,archivesDeleted:`{{count}} arşiv silindi`,failedDeleteArchives:`Arşivler silinemedi`,photoDeleted:`Fotoğraf silindi`,failedDeletePhoto:`Fotoğraf silinemedi`},list:{name:`Ad`,printer:`Yazıcı`,date:`Tarih`,size:`Boyut`,actions:`İşlemler`,hasTimelapse:`Zaman atlamalı videosu var`},log:{date:`Tarih`,printName:`Baskı Adı`,printer:`Yazıcı`,user:`Kullanıcı`,status:`Durum`,duration:`Süre`,filament:`Filament`,allPrinters:`Tüm Yazıcılar`,allUsers:`Tüm Kullanıcılar`,allStatuses:`Tüm Durumlar`,cancelled:`İptal edildi`,skipped:`Atlandı`,dateFrom:`Başlangıç`,dateTo:`Bitiş`,noEntries:`Baskı günlüğü kaydı bulunamadı`,showing:`{{total}} kayıttan {{count}} tanesi gösteriliyor`,rowsPerPage:`Satır`,page:`Sayfa`,prev:`Önceki`,next:`Sonraki`,clearLog:`Günlüğü Temizle`,clearLogTitle:`Baskı Günlüğünü Temizle`,clearLogConfirm:`Tüm baskı günlüğü kayıtları kalıcı olarak silinecek. Arşivler ve kuyruk öğeleri etkilenmeyecek. Bu işlem geri alınamaz. Emin misiniz?`,clearLogButton:`Hepsini Temizle`,cleared:`{{count}} günlük kaydı temizlendi`,clearFailed:`Baskı günlüğü temizlenemedi`,deleteEntryTitle:`Baskı günlüğü girişini sil`,deleteEntryConfirm:`Bu giriş günlükten kaldırılacak ve filament, süre ve maliyet katkıları Hızlı İstatistikler'den çıkarılacak. İlgili arşiv (varsa) etkilenmez. Bu işlem geri alınamaz.`,entryDeleted:`Baskı günlüğü girişi silindi`,entryDeleteFailed:`Baskı günlüğü girişi silinemedi`,editEntryTitle:`Baskı günlüğü girişini düzenle`,editEntryDescription:`Bu baskıyı sınıflandırın. Hata Analizi widget'ı bu değerlere göre gruplandırır, böylece güncellemeler istatistiklere anında yansır.`,entryUpdated:`Baskı günlüğü girişi güncellendi`,entryUpdateFailed:`Baskı günlüğü girişi güncellenemedi`,statuses:{completed:`Tamamlandı`,failed:`Başarısız`,stopped:`Durduruldu`,cancelled:`İptal edildi`,skipped:`Atlandı`}}},queue:{title:`Baskı Kuyruğu`,subtitle:`Baskı işlerinizi zamanlayın ve yönetin`,addToQueue:`Kuyruğa Ekle`,filamentShort:{rowBadge:`Atanan makara için yetersiz filament`,rowTooltip:`Sevk planlayıcı bu öğeyi işaretledi. Yuva başına eksikliği görmek ve yine de yazdırıp yazdırmayacağınıza karar vermek için Oynat'a tıklayın.`,confirmTitle:`Yetersiz filament`,confirmIntro:`Atanan makara en az bir yuvayı karşılayamıyor. Yine de yazdırılsın mı?`,lineItem:`Yuva {{slot}}: {{required}} g gerekli, {{remaining}} g kaldı`,unknown:`bilinmiyor`,printAnyway:`Yine de Yazdır`},print:`Yazdır`,reprint:`Tekrar Yazdır`,schedulePrint:`Baskıyı Zamanla`,editQueueItem:`Kuyruk Öğesini Düzenle`,printToPrinters:`{{count}} Yazıcıya Yazdır`,queueToPrinters:`{{count}} Yazıcıya Kuyrukla`,queueSelectedPlates:`{{count}} Plakayı Kuyrukla`,selectAllPlates:`Tüm {{count}} Plakayı Seç`,deselectAll:`Seçimi Kaldır`,printQueued:`Baskı kuyruğa eklendi`,itemsQueued:`{{count}} öğe kuyruğa eklendi`,sending:`Gönderiliyor...`,sendingProgress:`Gönderiliyor {{current}}/{{total}}...`,adding:`Ekleniyor...`,addingProgress:`Ekleniyor {{current}}/{{total}}...`,savingProgress:`Kaydediliyor {{current}}/{{total}}...`,clearQueue:`Kuyruğu Temizle`,clearHistory:`Geçmişi Temizle`,emptyQueue:`Kuyruk boş`,position:`Konum`,scheduledTime:`Zamanlanmış Süre`,moveUp:`Yukarı Taşı`,moveDown:`Aşağı Taşı`,startNow:`Şimdi Başlat`,printingInProgress:`Baskı devam ediyor...`,viewArchive:`Arşivi görüntüle`,viewInFileManager:`Dosya Yöneticisinde görüntüle`,itemCount:`{{count}} öğe`,itemCount_plural:`{{count}} öğe`,dragToReorder:`Yeniden sıralamak için sürükleyin (yalnızca ASAP)`,reorderHint:`Konum yalnızca ASAP öğelerini etkiler. Zamanlanmış öğeler belirlenen zamanlarında çalışır.`,sjf:{label:`SJF`,tooltip:`En Kısa İş İlk — planlayıcı daha kısa baskılara öncelik verir`},addedBy:`{{name}} tarafından eklendi`,nextInQueue:`Kuyrukta sıradaki`,clearPlateSuccess:`Plaka temizlendi — sonraki baskıya hazır`,plateNumber:`Plaka {{index}}`,quantity:`Miktar`,quantityHint:`{{count}} kuyruk öğesi oluşturur`,activeBatches:`Aktif Yığınlar`,batchProgress:`{{total}} öğeden {{completed}} tanesi tamamlandı`,cancelBatch:`Kalanları İptal Et`,batchCancelled:`Kalan yığın öğeleri iptal edildi`,cancelBatchConfirmTitle:`Yığını İptal Et`,cancelBatchConfirmMessage:`Bu yığındaki tüm bekleyen öğeler iptal edilsin mi?`,batch:{defaultName:`Yığın`,label:`{{count}} öğe`,label_plural:`{{count}} öğe`,pendingCount:`{{count}} bekleyen`,pendingCount_plural:`{{count}} bekleyen`,expand:`Yığını genişlet`,collapse:`Yığını daralt`,groupAsBatch:`Yığın olarak grupla…`,groupAsBatchDescription:`Seçilen {{count}} öğeyi tek bir daraltılabilir yığında birleştirin.`,nameLabel:`Yığın adı`,namePlaceholder:`örn. Cuma hediyeleri`,create:`Yığın oluştur`,ungroup:`Gruptan çıkar`,ungroupConfirmTitle:`Yığını gruptan çıkar?`,ungroupConfirmMessage:`Öğeler kuyrukta kalacak ancak artık birlikte gruplanmayacak.`,dragGroup:`Grubu sürükle`},tabs:{queue:`Kuyruk`,history:`Geçmiş`,timeline:`Zaman çizelgesi`},layout:{flatList:`Liste`,byPrinter:`Yazıcıya göre`,groupByPrinter:`Yazıcıya göre grupla`},history:{emptyTitle:`Henüz geçmiş yok`,emptyDescription:`Tamamlanan, iptal edilen ve başarısız baskılar burada görünür.`},dragGhost:{multiCount:`{{count}} öğe`,batch:`{{name}} ({{count}} kopya)`,batch_plural:`{{name}} ({{count}} kopya)`},sections:{currentlyPrinting:`Şu Anda Yazdırılan`,queued:`Kuyruktaki`,history:`Geçmiş`},status:{pending:`Beklemede`,waiting:`Bekliyor`,printing:`Yazdırılıyor`,paused:`Duraklatıldı`,completed:`Tamamlandı`,failed:`Başarısız`,skipped:`Atlandı`,cancelled:`İptal edildi`},summary:{printing:`Yazdırılıyor`,queued:`Kuyrukta`,totalTime:`Toplam Kuyruk Süresi`,totalWeight:`Toplam Kuyruk Ağırlığı`,history:`Geçmiş`},filter:{allPrinters:`Tüm Yazıcılar`,unassigned:`Atanmamış`,allStatus:`Tüm Durumlar`,allLocations:`Tüm Konumlar`,any:`Herhangi`},sort:{byPosition:`Konuma Göre Sırala`,byName:`Ada Göre Sırala`,byPrinter:`Yazıcıya Göre Sırala`,bySchedule:`Zamana Göre Sırala`,byDate:`Tarihe Göre Sırala`,ascendingOldest:`Artan (önce en eski)`,descendingNewest:`Azalan (önce en yeni)`},badges:{staged:`Hazırlandı`,requiresPrevious:`Önceki başarı gerekli`,autoPowerOff:`Otomatik kapanma`,gcodeInjection:`G-kod`},empty:{title:`Zamanlanmış baskı yok`,description:`Bağlam menüsündeki "Zamanla" seçeneğini kullanarak Arşivler sayfasından bir baskı zamanlayın veya başlamak için dosyaları sürükleyip bırakın.`},time:{asap:`ASAP`,overdue:`Gecikmiş`,now:`Şimdi`,lessThanMinute:`Bir dakikadan az`,inMinutes:`{{count}} dk içinde`,inHours:`{{count}} saat içinde`},actions:{stopPrint:`Baskıyı Durdur`,startPrint:`Baskıyı Başlat`,requeue:`Yeniden Kuyrukla`},bulkEdit:{title:`{{count}} Öğeyi Düzenle`,title_plural:`{{count}} Öğeyi Düzenle`,description:`Yalnızca değiştirilen ayarlar seçili öğelere uygulanacak.`,printer:`Yazıcı`,noChange:`— Değişiklik yok —`,queueOptions:`Kuyruk Seçenekleri`,staged:`Hazırlandı (manuel başlatma)`,autoPowerOff:`Baskı sonrası otomatik kapanma`,requirePrevious:`Önceki başarı gerekli`,printOptions:`Baskı Seçenekleri`,bedLevelling:`Tabla seviyelendirme`,flowCalibration:`Akış kalibrasyonu`,vibrationCalibration:`Titreşim kalibrasyonu`,layerInspection:`İlk katman denetimi`,timelapse:`Zaman atlamalı video`,useAms:`AMS Kullan`,nozzleOffsetCali:`Nozül ofset kalibrasyonu`,applyChanges:`Değişiklikleri Uygula`,selectAll:`Tümünü Seç`,deselectAll:`Seçimi Kaldır`,selected:`{{count}} seçildi`,editSelected:`Seçilenleri Düzenle`,cancelSelected:`Seçilenleri İptal Et`},confirm:{cancelTitle:`Zamanlanmış Baskıyı İptal Et`,cancelMessage:`"{{name}}" iptal etmek istediğinizden emin misiniz?`,stopTitle:`Baskıyı Durdur`,stopMessage:`"{{name}}" mevcut baskıyı durdurmak istediğinizden emin misiniz? Bu, yazıcıdaki baskı işini iptal edecek.`,removeTitle:`Geçmişten Kaldır`,removeMessage:`"{{name}}" kuyruk geçmişinden kaldırmak istediğinizden emin misiniz?`,clearHistoryTitle:`Geçmişi Temizle`,clearHistoryMessage:`Geçmişten {{count}} öğenin tümünü kaldırmak istediğinizden emin misiniz?`,cancelButton:`Baskıyı İptal Et`,stopButton:`Baskıyı Durdur`,thisPrint:`bu baskı`,thisItem:`bu öğe`},toast:{cancelled:`Kuyruk öğesi iptal edildi`,cancelFailed:`Öğe iptal edilemedi`,removed:`Kuyruk öğesi kaldırıldı`,removeFailed:`Öğe kaldırılamadı`,stopped:`Baskı durduruldu`,stopFailed:`Baskı durdurulamadı`,released:`Baskı kuyruğa bırakıldı`,startFailed:`Baskı başlatılamadı`,reorderFailed:`Kuyruk yeniden sıralanamadı`,historyCleared:`{{count}} geçmiş öğesi temizlendi`,clearHistoryFailed:`Geçmiş temizlenemedi`,updateFailed:`Öğeler güncellenemedi`,bulkCancelled:`{{count}} öğe iptal edildi`,bulkCancelFailed:`Öğeler iptal edilemedi`,batchCreated:`"{{name}}" yığını oluşturuldu`,batchCreateFailed:`Yığın oluşturma başarısız`,batchUngrouped:`{{count}} öğe gruptan çıkarıldı`,batchUngroupFailed:`Yığını gruptan çıkarma başarısız`},timeline:{listView:`Liste`,timelineView:`Zaman Çizelgesi`,unassigned:`Atanmamış`,noData:`Bu gün için zamanlanmış baskı yok`,nothingCommitted:`Bu pencerede onaylanmış programlar yok. Hazırlanmış öğeler, beklemedeki öğeler ve boştaki yazıcılardaki ASAP işleri gösterilmez — burada görmek için zamanlanmış bir saat belirleyin veya hazırlanmış bir öğeyi serbest bırakın.`,allDoneBy:`Tüm baskıların {{time}}'e kadar bitmesi tahmin ediliyor`,staged:`Hazırlandı`,filterAll:`Tümünü Göster`,filterPrinting:`Yazdırılıyor`,filterQueued:`Kuyrukta`,time:{anyMoment:`her an`,minutesLeft:`{{minutes}}dk kaldı`,hoursLeft:`{{hours}}sa kaldı`,hoursMinutesLeft:`{{hours}}sa {{minutes}}dk kaldı`},day:{previous:`Önceki gün`,next:`Sonraki gün`,today:`Bugün`},window:{back12h:`12 saat geri`,forward12h:`12 saat ileri`,now:`Şimdi`},printerColumnHeader:`Yazıcı`},permissions:{noStopPrint:`Baskıları durdurma izniniz yok`,noStartPrint:`Baskıları başlatma izniniz yok`,noEdit:`Bu kuyruk öğesini düzenleme izniniz yok`,noCancel:`Bu kuyruk öğesini iptal etme izniniz yok`,noRequeue:`Öğeleri yeniden kuyruklama izniniz yok`,noRemove:`Bu kuyruk öğesini kaldırma izniniz yok`,noClearHistory:`Tüm geçmişi temizleme izniniz yok`,noEditItems:`Kuyruk öğelerini düzenleme izniniz yok`,noCancelItems:`Kuyruk öğelerini iptal etme izniniz yok`}},backgroundDispatch:{unknownFile:`Bilinmeyen dosya`,unknownPrinter:`Bilinmeyen yazıcı`,startingPrints:`Baskılar başlatılıyor`,progressSummary:`{{complete}}/{{total}} tamamlandı • Sevk edildi: {{dispatched}} • İşleniyor: {{processing}}`,expandDetails:`Sevk ayrıntılarını genişlet`,collapseDetails:`Sevk ayrıntılarını daralt`,dismissToast:`Sevk bildirimini kapat`,cancelDispatchJob:`Sevk işini iptal et`,cancel:`İptal`,cancelling:`İptal ediliyor…`,awaitingPrinter:`Yazıcı bekleniyor…`,status:{dispatched:`Sevk Edildi`,processing:`İşleniyor`,completed:`Tamamlandı`,failed:`Başarısız`,cancelled:`İptal edildi`},toast:{cancellingUpload:`Yükleme iptal ediliyor...`,cancelled:`Sevk iptal edildi`,cancelFailed:`Sevk iptal edilemedi`,completeWithFailures:`Arka plan sevki tamamlandı: {{completed}} başarılı, {{failed}} başarısız`,completeSuccess:`Arka plan sevki tamamlandı: {{completed}} başarılı`,printStartedRemaining:`{{completed}} baskı başlatıldı, {{remaining}} tane daha gönderiliyor...`}},stats:{title:`İstatistikler`,subtitle:`Yeniden düzenlemek için widget'ları sürükleyin. Gizlemek için göz simgesine tıklayın.`,overview:`Genel Bakış`,totalPrints:`Toplam Baskı`,successRate:`Başarı Oranı`,totalPrintTime:`Toplam Baskı Süresi`,printTime:`Baskı Süresi`,totalFilament:`Toplam Kullanılan Filament`,filamentUsed:`Kullanılan Filament`,filamentCost:`Filament Maliyeti`,totalCost:`Toplam Maliyet`,energyUsed:`Kullanılan Enerji`,energyCost:`Enerji Maliyeti`,energyWarmingUpTooltip:`Enerji takibi hâlâ saatlik anlık görüntüler topluyor. Tarih aralığı toplamları, seçilen aralıktan önce en az bir anlık görüntü olduğunda doğru hâle gelir. Erken değerler eksik sayabilir.`,averagePrintTime:`Ortalama Baskı Süresi`,printsPerDay:`Günlük Baskı`,byPrinter:`Yazıcıya Göre`,printsByPrinter:`Yazıcıya Göre Baskılar`,byMaterial:`Malzemeye Göre`,byMonth:`Aya Göre`,last7Days:`Son 7 Gün`,last30Days:`Son 30 Gün`,last90Days:`Son 90 Gün`,allTime:`Tüm Zamanlar`,quickStats:`Hızlı İstatistikler`,printActivity:`Baskı Etkinliği`,filamentTypes:`Filament Türleri`,filamentTrends:`Filament Trendleri`,failureAnalysis:`Başarısızlık Analizi`,timeAccuracy:`Süre Doğruluğu`,successful:`Başarılı:`,failed:`Başarısız:`,cancelled:`İptal edildi:`,perfectEstimate:`%100 = mükemmel tahmin`,noTimeAccuracyData:`Henüz süre doğruluğu verisi yok`,noFilamentData:`Filament verisi mevcut değil`,noPrinterData:`Yazıcı verisi mevcut değil`,noPrintData:`Baskı verisi mevcut değil`,noPrintDataLast30Days:`Son 30 günde baskı verisi yok`,failureReasons:`Başarısızlık Nedenleri`,topFailureReasons:`En Sık Başarısızlık Nedenleri`,failedPrintsCount:`{{total}} baskının {{failed}} tanesi başarısız`,lastWeekRate:`Geçen hafta: %{{rate}}`,resetLayout:`Düzeni Sıfırla`,recalculateCosts:`Maliyetleri Yeniden Hesapla`,recalculateCostsHint:`Mevcut filament fiyatlarını kullanarak tüm arşiv maliyetlerini yeniden hesapla`,exportStats:`İstatistikleri Dışa Aktar`,exportAsCsv:`CSV Olarak Dışa Aktar`,exportAsExcel:`Excel Olarak Dışa Aktar`,hiddenCount:`{{count}} Gizli`,exportDownloaded:`Dışa aktarma indirildi`,exportFailed:`Dışa aktarma başarısız`,layoutReset:`Düzen sıfırlandı`,recalculatedCosts:`{{count}} arşiv için maliyetler yeniden hesaplandı`,recalculateFailed:`Maliyetler yeniden hesaplanamadı`,loadingStats:`İstatistikler yükleniyor...`,noPermissionResetLayout:`Düzeni sıfırlama izniniz yok`,noPermissionRecalculate:`Maliyetleri yeniden hesaplama izniniz yok`,noPrintDataInRange:`Seçili aralıkta baskı verisi yok`,periodFilament:`Dönem Filamenti`,periodCost:`Dönem Maliyeti`,avgPerPrint:`Baskı Başına Ort.`,usageOverTime:`Zaman İçinde Kullanım`,filamentByWeight:`Ağırlık`,printDuration:`Baskı Süresi`,printerUtilization:`Yazıcı Kullanımı`,filamentSuccess:`Malzemeye Göre Başarı`,printHabits:`Baskı Alışkanlıkları`,printTimeOfDay:`Günün Baskı Saati`,colorDistribution:`Renk Dağılımı`,noColorData:`Renk verisi mevcut değil`,records:`Kayıtlar`,longestPrint:`En Uzun Baskı`,heaviestPrint:`En Ağır Baskı`,mostExpensivePrint:`En Pahalı`,busiestDay:`En Yoğun Gün`,successStreak:`Başarı Serisi`,streakPrint:`ardışık baskı`,streakPrints:`{{count}} ardışık baskı`,printerStats:`Yazıcı İstatistikleri`,hours:`saat`,avgPrints:`Ort. baskı`,noArchiveData:`Baskı verisi mevcut değil`,filamentByTime:`Süre`,avgWeight:`Ort. ağırlık`,avgTime:`Ort. süre`,filamentByPrints:`Baskılar`,timeframe:{today:`Bugün`,"this-week":`Bu Hafta`,"this-month":`Bu Ay`,"last-7":`Son 7 Gün`,"last-30":`Son 30 Gün`,"last-90":`Son 90 Gün`,"this-year":`Bu Yıl`,"all-time":`Tüm Zamanlar`,custom:`Özel Aralık`,from:`Başlangıç`,to:`Bitiş`},allUsers:`Tüm Kullanıcılar`,noUser:`Kullanıcı Yok (Sistem)`,filterByUser:`Kullanıcıya Göre Filtrele`},maintenance:{title:`Bakım`,overview:`Genel Bakış`,allOk:`Tüm bakım güncel`,dueCount:`{{count}} öğe bekliyor`,dueCount_plural:`{{count}} öğe bekliyor`,warningCount:`{{count}} uyarı`,warningCount_plural:`{{count}} uyarı`,totalPrintTime:`Toplam Baskı Süresi`,nextMaintenance:`Sonraki Bakım`,nothingDue:`Bekleyen yok`,tasks:`Görevler`,lastPerformed:`Son yapılan`,interval:`Aralık`,hoursRemaining:`{{hours}}sa kaldı`,hoursOverdue:`{{hours}}sa gecikmiş`,markDone:`Tamamlandı Olarak İşaretle`,performMaintenance:`Bakım Gerçekleştir`,history:`Geçmiş`,noHistory:`Bakım geçmişi yok`,editPrintHours:`Baskı Saatlerini Düzenle`,currentHours:`Mevcut Saat`,statusTab:`Durum`,settingsTab:`Ayarlar`,overdueCount:`{{count}} gecikmiş`,dueSoonCount:`{{count}} yakında`,dueSoon:`Yakında`,allGood:`Her şey iyi`,overdueBy:`{{duration}} gecikmiş`,dueIn:`{{duration}} içinde`,timeLeft:`{{duration}} kaldı`,day:`1 gün`,days:`{{count}} gün`,week:`1 hafta`,weeks:`{{count}} hafta`,month:`1 ay`,months:`{{count}} ay`,year:`1 yıl`,maintenanceTypes:`Bakım Türleri`,maintenanceTypesDescription:`Sistem türleri ve özel bakım görevleriniz`,addCustomType:`Özel Tür Ekle`,restoreDefaults:`Varsayılan Görevleri Geri Yükle`,intervalType:`Aralık Türü`,intervalValue:`Aralık ({{type}})`,icon:`Simge`,documentationLink:`Dokümantasyon Bağlantısı (isteğe bağlı)`,assignToPrinters:`Yazıcılara Ata`,selectAtLeastOnePrinter:`En az bir yazıcı seçin`,addType:`Tür Ekle`,custom:`Özel`,printHours:`Baskı Saatleri`,calendarDays:`Takvim Günleri`,exampleName:`örn., HEPA Filtresini Değiştir`,viewDocumentation:`Dokümantasyonu görüntüle`,timeBasedInterval:`Zaman tabanlı aralık`,intervalOverrides:`Aralık Geçersiz Kılmaları`,intervalOverridesDescription:`Belirli yazıcılar için aralıkları özelleştir`,assignedToPrinters:`Atanan yazıcılar:`,noPrintersAssigned:`Atanan yazıcı yok`,addPrinterShort:`Ekle:`,printersAssignedClick:`{{count}} yazıcı atandı - yönetmek için tıklayın`,removeFromPrinter:`Bu yazıcıdan kaldır`,types:{lubricateCarbonRods:`Karbon Çubukları Yağla`,lubricateRails:`Lineer Rayları Yağla`,cleanNozzle:`Nozulu/Hotend Temizle`,checkBelts:`Kayış Gerginliğini Kontrol Et`,cleanBuildPlate:`Baskı Plakasını Temizle`,checkExtruder:`Ekstrüder Dişlilerini Kontrol Et`,checkCooling:`Soğutma Fanlarını Kontrol Et`,generalInspection:`Genel Denetim`,cleanCarbonRods:`Karbon Çubukları Temizle`,lubricateSteelRods:`Çelik Çubukları Yağla`,cleanSteelRods:`Çelik Çubukları Temizle`,cleanLinearRails:`Lineer Rayları Temizle`,checkPtfeTube:`PTFE Tüpünü Kontrol Et`,replaceHepaFilter:`HEPA Filtresini Değiştir`,replaceCarbonFilter:`Karbon Filtresini Değiştir`,lubricateLeftNozzleRail:`Sol Nozul Rayını Yağla`},maintenanceComplete:`Bakım tamamlandı olarak işaretlendi`,typeUpdated:`Bakım türü güncellendi`,typeDeleted:`Bakım türü silindi`,defaultsRestored:`{{count}} varsayılan görev geri yüklendi`,printHoursUpdated:`Baskı saatleri güncellendi`,printerAssigned:`Yazıcı atandı`,printerRemoved:`Yazıcı kaldırıldı`,deleteTypeConfirm:`"{{name}}" silinsin mi?`,deleteSystemTypeTitle:`Varsayılan bakım görevi silinsin mi?`,deleteSystemTypeMessage:`"{{name}}" varsayılan bakım görevini silmek istediğinizden emin misiniz?`,noPermissionUpdate:`Bakım öğelerini güncelleme izniniz yok`,noPermissionPerform:`Bakım gerçekleştirme izniniz yok`,noPermissionEditTypes:`Bakım türlerini düzenleme izniniz yok`,noPermissionDeleteTypes:`Bakım türlerini silme izniniz yok`,noPermissionEditHours:`Baskı saatlerini düzenleme izniniz yok`,noPermissionRemovePrinter:`Yazıcı atamalarını kaldırma izniniz yok`,noPermissionAssignPrinter:`Yazıcı atama izniniz yok`,noPermissionEditIntervals:`Aralıkları düzenleme izniniz yok`,configureSettings:`Bakım türlerini ve aralıklarını yapılandır`},settings:{title:`Ayarlar`,general:`Genel`,tabs:{general:`Genel`,smartPlugs:`Akıllı Prizler`,notifications:`Bildirimler`,queue:`İş Akışı`,filament:`Filament`,network:`Ağ`,apiKeys:`API Anahtarları`,virtualPrinter:`Sanal Yazıcı`,spoolbuddy:`SpoolBuddy`,failureDetection:`Başarısızlık Algılama`,users:`Kimlik Doğrulama`,backup:`Yedekleme`,emailAuth:`E-posta Kimlik Doğrulama`,ldap:`LDAP`,twoFa:`İki Faktörlü Kimlik Doğrulama`,oidc:`SSO / OIDC`,security:`Güvenlik`},spoolbuddy:{infoTitle:`SpoolBuddy cihazları`,infoBody:`SpoolBuddy kioskları heartbeat üzerinden otomatik olarak kayıt olur. Artık kullanılmıyorsa veya bir daemon çökmesi nedeniyle eski bir kopya kaldıysa bir cihazı buradan kayıttan çıkarın.`,duplicatesTitle:`{{count}} cihaz kayıtlı`,duplicatesBody:`Yalnızca ilk kayıtlı cihaz kiosk arayüzü tarafından kullanılır. Bunlardan biri çökme sonucu kalmış eski bir kopya ise kayıttan çıkarın — çevrimiçi bir cihaz sonraki heartbeat'inde kendini yeniden kaydedecek.`,empty:`Henüz kayıtlı SpoolBuddy cihazı yok.`,online:`Çevrimiçi`,offline:`Çevrimdışı`,unregister:`Kayıttan Çıkar`,unregisterSuccess:`Cihaz kayıttan çıkarıldı`,unregisterError:`Cihaz kayıttan çıkarılamadı`,confirmTitle:`SpoolBuddy cihazı kayıttan çıkarılsın mı?`,confirmBody:`Bu, "{{hostname}}" ({{deviceId}}) cihazını veritabanından kaldıracak. Cihaz çevrimiçiyse, sonraki heartbeat'inde kendini yeniden kaydedecek.`,ipAddress:`IP adresi`,firmware:`Firmware`,lastSeen:`Son görülme`,daemonUptime:`Daemon çalışma süresi`,systemUptime:`Sistem çalışma süresi`,never:`asla`,nfc:`NFC`,scale:`Tartı`,cpuTemp:`CPU sıcaklığı`,cpuLoad:`CPU yükü`,memory:`Bellek`,disk:`Disk`,update:`Güncelle`,updateConfirmTitle:`Spoolbuddy daemon güncellensin mi?`,updateConfirmBody:`"{{hostname}}" cihazında yazılım güncellemesi tetiklensin mi? Güncelleme uygulandığında daemon yeniden başlayacak.`,restartBrowser:`Tarayıcıyı Yeniden Başlat`,restartBrowserConfirmTitle:`Kiosk tarayıcısı yeniden başlatılsın mı?`,restartBrowserConfirmBody:`"{{hostname}}" cihazındaki kiosk tarayıcısı yeniden başlatılsın mı? Ekran kısa bir süre kararacak.`,restartDaemon:`Daemon'u Yeniden Başlat`,restartDaemonConfirmTitle:`Spoolbuddy daemon yeniden başlatılsın mı?`,restartDaemonConfirmBody:`"{{hostname}}" üzerindeki Spoolbuddy daemon yeniden başlatılsın mı? Cihaz birkaç saniye çevrimdışı olacak.`,reboot:`Yeniden Başlat`,rebootConfirmTitle:`Cihaz yeniden başlatılsın mı?`,rebootConfirmBody:`"{{hostname}}" yeniden başlatılsın mı? Cihaz yaklaşık bir dakika çevrimdışı olacak.`,shutdown:`Kapat`,shutdownConfirmTitle:`Cihaz kapatılsın mı?`,shutdownConfirmBody:`"{{hostname}}" kapatılsın mı? Tekrar açmak için fiziksel erişime ihtiyacınız olacak.`,commandConfirm:`Onayla`,commandQueued:`Komut kuyruğa alındı`,commandError:`Komut gönderilemedi`},ldap:{title:`LDAP Kimlik Doğrulama`,enabledDesc:`LDAP kimlik doğrulama etkin`,disabledDesc:`LDAP kimlik doğrulama devre dışı`,disabledHint:`Aşağıdaki LDAP ayarlarını yapılandırın ve kaydedin, ardından etkinleştirin.`,enabled:`LDAP kimlik doğrulama etkinleştirildi`,disabled:`LDAP kimlik doğrulama devre dışı bırakıldı`,feature1:`Kullanıcılar LDAP kimlik bilgileriyle giriş yapabilir`,feature2:`Yerel yönetici hesabı yedek olarak kalır`,feature3:`LDAP grupları giriş sırasında BamBuddy gruplarına eşlenir`,serverConfig:`LDAP Sunucu Yapılandırması`,serverUrl:`Sunucu URL`,serverUrlHint:`SSL için ldaps:// veya StartTLS ile ldap:// kullanın`,security:`Güvenlik`,securityHint:`StartTLS düz bir bağlantıyı TLS'ye yükseltir. LDAPS başlangıçtan itibaren TLS kullanır.`,bindDn:`Bind DN (Servis Hesabı)`,bindPassword:`Bind Parolası`,searchBase:`Arama Tabanı DN`,userFilter:`Kullanıcı Arama Filtresi`,userFilterHint:`{username} giriş kullanıcı adıyla değiştirilir. OpenLDAP için (uid={username}) kullanın.`,advanced:`Gelişmiş`,autoProvision:`Kullanıcıları otomatik tedarik et`,autoProvisionHint:`İlk LDAP girişinde otomatik olarak BamBuddy hesabı oluştur`,defaultGroup:`Varsayılan grup`,defaultGroupNone:`— Hiçbiri (yedek yok) —`,defaultGroupHint:`Bir LDAP kullanıcısı kimlik doğruladığında ancak eşlenmiş herhangi bir LDAP grubunda listelenmediğinde atanan yedek grup. Eşlenmemiş kullanıcıları izinsiz bırakmak için boş bırakın.`,groupMapping:`Grup Eşleme (JSON)`,groupMappingHint:`LDAP grup DN'lerini BamBuddy gruplarına eşle. Kullanılabilir gruplar: `,testConnection:`Bağlantıyı Test Et`,settingsSaved:`LDAP ayarları kaydedildi`,errors:{serverRequired:`LDAP sunucu URL gerekli`,searchBaseRequired:`Arama tabanı DN gerekli`,enableAuthFirst:`Önce kimlik doğrulamayı etkinleştirin`,configureLdapFirst:`Önce LDAP ayarlarını kaydedin`}},email:{smtpSettings:`SMTP Yapılandırması`,smtpHost:`SMTP Sunucusu`,smtpPort:`SMTP Portu`,security:`Güvenlik`,authentication:`Kimlik Doğrulama`,username:`Kullanıcı Adı`,password:`Parola`,fromEmail:`Gönderen E-posta`,fromName:`Gönderen Adı`,testConnection:`SMTP Bağlantısını Test Et`,testRecipient:`Test Alıcı E-postası`,sendTest:`Test E-postası Gönder`,sending:`Gönderiliyor...`,save:`Ayarları Kaydet`,saving:`Kaydediliyor...`,advancedAuth:`Gelişmiş Kimlik Doğrulama`,advancedAuthEnabled:`Gelişmiş Kimlik Doğrulama etkin`,advancedAuthEnabledDesc:`E-posta tabanlı kullanıcı yönetimi özellikleri aktif. Yeni kullanıcılar e-posta ile otomatik oluşturulan parolalar alacak ve kullanıcılar parola sıfırlama özelliğiyle parolalarını sıfırlayabilecek.`,advancedAuthDisabled:`Gelişmiş Kimlik Doğrulama devre dışı`,advancedAuthDisabledDesc:`Kullanıcı yönetimi için e-posta tabanlı özellikleri etkinleştirmek için gelişmiş kimlik doğrulamayı etkinleştirin.`,enable:`Etkinleştir`,disable:`Devre dışı bırak`,feature1:`Parolalar otomatik oluşturulur ve yeni kullanıcılara e-posta ile gönderilir`,feature2:`Kullanıcılar kullanıcı adı veya e-posta ile giriş yapabilir`,feature3:`Parola unuttum özelliği kullanılabilir`,feature4:`Yöneticiler kullanıcı parolalarını e-posta ile sıfırlayabilir`,errors:{requiredFields:`Lütfen tüm zorunlu alanları doldurun`,usernameRequired:`Kimlik doğrulama etkinken kullanıcı adı zorunludur`,enterTestEmail:`Lütfen test e-posta adresi girin`,smtpServerAndEmail:`Test etmeden önce lütfen SMTP Sunucusu ve Gönderen E-posta alanlarını doldurun`,usernamePasswordRequired:`Kimlik doğrulama etkinken Kullanıcı Adı ve Parola zorunludur`,configureSmtpFirst:`Lütfen önce SMTP ayarlarını yapılandırın ve test edin`,enableAuthFirst:`E-posta tabanlı özellikleri kullanmak için lütfen önce kimlik doğrulamayı etkinleştirin.`},success:{settingsSaved:`SMTP ayarları başarıyla kaydedildi`},securityOptions:{starttls:`STARTTLS (Port 587)`,ssl:`SSL/TLS (Port 465)`,none:`Hiçbiri (Port 25)`},authOptions:{enabled:`Etkin`,disabled:`Devre dışı`}},appearance:`Görünüm`,notifications:`Bildirimler`,smartPlugs:`Akıllı Prizler`,spoolman:`Spoolman`,updates:`Güncellemeler`,language:`Dil`,languageDescription:`Tercih ettiğiniz dili seçin`,theme:`Tema`,themeLight:`Açık`,themeDark:`Koyu`,themeSystem:`Sistem`,defaultView:`Varsayılan Görünüm`,defaultViewDescription:`Uygulamayı açarken gösterilecek sayfa`,checkForUpdates:`Güncellemeleri Kontrol Et`,autoUpdate:`Otomatik Güncelleme`,currentVersion:`Mevcut Sürüm`,latestVersion:`En Son Sürüm`,upToDate:`Güncelsiniz`,updateAvailable:`Güncelleme mevcut`,notificationLanguage:`Bildirim Dili`,notificationLanguageDescription:`Push bildirimleri için dil`,bedCooledThreshold:`Tabla Soğuma Eşiği`,bedCooledThresholdDescription:`Bir baskıdan sonra tablanın soğumuş kabul edildiği sıcaklık`,userNotificationsEnabled:`Kullanıcı Bildirimleri`,userNotificationsEnabledDescription:`Baskı işi olayları için kullanıcı bildirim menüsünü ve e-posta bildirimlerini etkinleştir. Gelişmiş Kimlik Doğrulama gerektirir.`,userNotificationsDisabledHint:`Kullanıcı bildirimlerini kullanmak için Gelişmiş Kimlik Doğrulamayı etkinleştirin.`,notificationProviders:`Bildirim Sağlayıcıları`,addProvider:`Sağlayıcı Ekle`,editProvider:`Sağlayıcıyı Düzenle`,providerType:`Sağlayıcı Türü`,testNotification:`Test Bildirimi`,testSuccess:`Test bildirimi başarıyla gönderildi`,testFailed:`Test bildirimi gönderilemedi`,quietHours:`Sessiz Saatler`,quietHoursDescription:`Bu saatler arasında rahatsız etme`,quietHoursStart:`Başlangıç`,quietHoursEnd:`Bitiş`,events:{title:`Bildirim Olayları`,printStart:`Baskı Başladı`,printComplete:`Baskı Tamamlandı`,printFailed:`Baskı Başarısız`,printStopped:`Baskı Durduruldu`,printProgress:`İlerleme Kilometre Taşları`,printProgressDescription:`%25, %50, %75'te bildir`,printerOffline:`Yazıcı Çevrimdışı`,printerError:`Yazıcı Hatası`,filamentLow:`Az Filament`,maintenanceDue:`Bakım Zamanı`,maintenanceDueDescription:`Bakım gerektiğinde bildir`},smartPlug:{title:`Akıllı Prizler`,add:`Akıllı Priz Ekle`,edit:`Akıllı Prizi Düzenle`,name:`Ad`,ipAddress:`IP Adresi`,linkedPrinter:`Bağlı Yazıcı`,autoOn:`Otomatik Aç`,autoOnDescription:`Baskı başladığında aç`,autoOff:`Otomatik Kapat`,autoOffDescription:`Baskı tamamlandıktan sonra kapat`,offDelay:`Kapatma Gecikmesi`,offDelayMinutes:`Baskıdan sonra dakika`,offDelayTemp:`Nozul sıcaklığın altında olduğunda`,currentState:`Mevcut Durum`,turnOn:`Aç`,turnOff:`Kapat`},filamentTracking:`Filament Takibi`,filamentTrackingDesc:`Filament makaralarınızı nasıl takip edeceğinizi seçin. Yerleşik envanteri kullanabilir veya harici bir Spoolman sunucusuna bağlanabilirsiniz.`,filamentChecks:`Filament kontrolleri`,disableFilamentWarnings:`Filament uyarılarını devre dışı bırak`,disableFilamentWarningsDesc:`Yazdırırken veya kuyruğa eklerken yetersiz filamentle ilgili uyarıları gösterme`,preferLowestFilament:`En az kalan filamenti tercih et`,preferLowestFilamentDesc:`Birden fazla makara eşleştiğinde, kalan filamenti en az olanı kullan`,preferLowestFilamentBackupNote:`Yalnızca yazıcıda AMS Filament Backup etkinleştirildiğinde uygulanır — aksi takdirde seçilen makara bittiğinde yazıcı ikinci bir makaraya geçemez.`,trackingModeBuiltIn:`Yerleşik Envanter`,trackingModeBuiltInDesc:`RFID otomatik eşleştirme ve kullanım takibi dahil`,trackingModeSpoolmanDesc:`Harici filament yönetim sunucusu`,builtInFeatureRfid:`AMS'deki Bambu Lab RFID makaralarını otomatik olarak algılar`,builtInFeatureUsage:`Baskı başına filament tüketimini takip eder`,builtInFeatureCatalog:`Makaraları, renkleri ve K faktör profillerini yönetin`,builtInFeatureThirdParty:`Üçüncü taraf makaralar envanter makaralarına atanabilir`,amsSyncButton:`AMS'den Ağırlıkları Senkronize Et`,amsSyncTitle:`AMS'den Makara Ağırlıklarını Senkronize Et`,amsSyncMessage:`Bu, bağlı yazıcılardan gelen mevcut AMS kalan% değerleriyle tüm envanter makara ağırlıklarının üzerine yazar. Bozuk ağırlık verilerinden kurtarmak için bunu kullanın. Yazıcılar çevrimiçi olmalıdır.`,amsSyncing:`Senkronize ediliyor...`,amsSyncSuccess:`{{synced}} makara senkronize edildi, {{skipped}} atlandı`,amsSyncError:`AMS'den ağırlıklar senkronize edilemedi`,spoolmanAmsSyncButton:`AMS'den Spoolman Ağırlıklarını Senkronize Et`,spoolmanAmsSyncTitle:`AMS'den Spoolman Makara Ağırlıklarını Senkronize Et`,spoolmanAmsSyncMessage:`Bu, bağlı yazıcılardan gelen mevcut AMS kalan% değerlerine göre tüm Spoolman makara ağırlıklarını güncelleyecek. Yazıcılar çevrimiçi olmalıdır.`,spoolmanAmsSyncing:`Senkronize ediliyor...`,spoolmanAmsSyncSuccess:`{{synced}} makara senkronize edildi, {{skipped}} atlandı`,spoolmanAmsSyncError:`Spoolman ağırlıkları AMS'den senkronize edilemedi`,spoolmanAmsSyncErrorUnreachable:`Spoolman ağırlıkları senkronize edilemedi (Spoolman erişilemez)`,spoolmanAmsSyncErrorNotConfigured:`Spoolman ağırlıkları senkronize edilemedi (Spoolman yapılandırılmamış)`,spoolmanNotConfigured:`Spoolman yapılandırılmamış`,spoolmanFilamentCatalogTitle:`Spoolman Filament Kataloğu`,spoolmanFilamentCatalogDesc:`Spoolman örneğinizden filament adları ve boş ağırlıkları. Ad ve makara ağırlığı burada düzenlenebilir; diğer tüm özellikler doğrudan Spoolman'da yönetilir.`,spoolmanUrl:`Spoolman URL`,spoolmanUrlHint:`Spoolman sunucunuzun URL'si (örn., http://localhost:7912)`,spoolmanConnected:`Bağlı`,spoolmanDisconnected:`Bağlı değil`,status:`Durum`,connect:`Bağlan`,disconnect:`Bağlantıyı Kes`,howSyncWorks:`Senkronizasyon Nasıl Çalışır`,syncInfoRfidOnly:`Yalnızca RFID'li resmi Bambu Lab makaraları senkronize edilir`,syncInfoAutoCreate:`Yeni makaralar ilk senkronizasyonda Spoolman'da otomatik olarak oluşturulur`,syncInfoThirdPartySkipped:`Bambu Lab dışı makaralar (üçüncü taraf, yeniden doldurulmuş) atlanır`,linkingExistingSpools:`Mevcut Makaraları Bağlama`,linkingExistingSpoolsDesc:`Mevcut Spoolman makaralarını AMS'inize bağlamak için, bir AMS yuvasının üzerine gelin ve "Spoolman'a Bağla"ya tıklayın.`,syncMode:`Senkronizasyon Modu`,syncModeAuto:`Otomatik`,syncModeManual:`Yalnızca Manuel`,syncModeAutoDesc:`Değişiklikler algılandığında AMS verisi otomatik olarak senkronize edilir`,syncModeManualDesc:`Yalnızca manuel olarak tetiklendiğinde senkronize et`,syncAmsData:`AMS Verisini Senkronize Et`,syncAmsDataDesc:`Yazıcı AMS verisini manuel olarak Spoolman'a senkronize et`,allPrinters:`Tüm Yazıcılar`,noDefaultPrinter:`Varsayılan yok (her seferinde sor)`,sidebarOrder:`Kenar çubuğu sırası`,saveThumbnails:`Küçük resimleri kaydet`,captureFinishPhoto:`Bitiş fotoğrafı çek`,noPrintersConfigured:`Yapılandırılmış yazıcı yok`,archiveMode:{always:`Her zaman arşiv girişi oluştur`,never:`Asla arşiv girişi oluşturma`,ask:`Her seferinde sor`},checkForUpdatesLabel:`Güncellemeleri kontrol et`,checkPrinterFirmware:`Yazıcı firmware'ini kontrol et`,includeBetaUpdates:`Beta sürümleri dahil et`,includeBetaUpdatesDesc:`Güncellemeleri kontrol ederken beta ve önyayım sürümleri hakkında bildir`,enableRetry:`Yeniden denemeyi etkinleştir`,homeAssistantDescription:`Akıllı prizleri Home Assistant üzerinden kontrol et`,environmentManagedLabel:`(Ortam Yönetiliyor)`,autoEnabledViaEnv:`Ortam değişkenleriyle otomatik etkinleştirildi`,urlFromEnvReadOnly:`Değer HA_URL ortam değişkeniyle ayarlandı (salt okunur)`,tokenFromEnvReadOnly:`Değer HA_TOKEN ortam değişkeniyle ayarlandı (salt okunur)`,mqttConnectedTo:`Bağlı`,prometheusDescription:`Yazıcı verisini Prometheus formatında sun`,noSmartPlugsTitle:`Yapılandırılmış akıllı priz yok`,noSmartPlugsDescription:`Enerji kullanımını takip etmek ve güç kontrolünü otomatikleştirmek için Tasmota tabanlı bir akıllı priz ekleyin.`,noProvidersTitle:`Yapılandırılmış sağlayıcı yok`,noProvidersDescription:`Uyarı almak için bir sağlayıcı ekleyin.`,noTemplatesAvailable:`Şablon mevcut değil. Varsayılan şablonları yüklemek için arka ucu yeniden başlatın.`,apiPermissionView:`Yazıcı durumunu ve kuyruğu görüntüle`,apiPermissionEdit:`Baskı kuyruğundan öğe ekle ve kaldır`,apiKeysEmptyTitle:`API anahtarı yok`,apiKeysEmptyDescription:`Harici servislerle entegre olmak için bir API anahtarı oluşturun.`,noUsersFound:`Kullanıcı bulunamadı`,noGroupsFound:`Grup bulunamadı`,noGroupsAvailable:`Kullanılabilir grup yok`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,systemGroupWarning:`Sistem grubu adları değiştirilemez`,authDisabledTitle:`Kimlik Doğrulama Devre Dışı`,authDisabledFeature1:`Sisteme erişmek için giriş gerektir`,authDisabledFeature2:`Grup tabanlı izinlerle birden fazla kullanıcı oluştur`,authDisabledFeature3:`50'den fazla ayrıntılı izinle erişimi kontrol et`,userHasCreated:`Bu kullanıcı şunları oluşturdu:`,userItemsQuestion:`Bu öğelerle ne yapmak istersiniz?`,deleteUserConfirm:`Bu kullanıcıyı silmek istediğinizden emin misiniz?`,actionCannotBeUndone:`Bu işlem geri alınamaz.`,addFirstSmartPlug:`İlk Akıllı Prizinizi Ekleyin`,providers:`Sağlayıcılar`,log:`Günlük`,testAll:`Hepsini Test Et`,testResults:`Test Sonuçları`,testPassedCount:`{{count}} başarılı`,testFailedCount:`{{count}} başarısız`,messageTemplates:`Mesaj Şablonları`,messageTemplatesDescription:`Her olay için bildirim mesajlarını özelleştirin.`,apiKeys:`API Anahtarları`,apiKeysDescription:`Harici entegrasyonlar ve webhook'lar için API anahtarları oluşturun.`,createKey:`Anahtar Oluştur`,apiKeyCreated:`API Anahtarı Başarıyla Oluşturuldu`,apiKeyCopyWarning:`Bu anahtarı şimdi kopyalayın - bir daha gösterilmeyecek!`,useInApiBrowser:`API Tarayıcısında Kullan`,apiKeyQrButton:`QR kodu`,apiKeyQrTitle:`Yapılandırmak için tarayın`,apiKeyQrCaption:`Bu sunucuyu ve API anahtarını eklemek için mobil uygulamanızla tarayın.`,apiKeyQrWarning:`Gizli API anahtarınızı içerir — başkalarının görebileceği yerlerde paylaşmayın veya ekran görüntüsü almayın.`,createNewApiKey:`Yeni API Anahtarı Oluştur`,keyName:`Anahtar Adı`,keyNamePlaceholder:`örn., Home Assistant, OctoPrint`,readStatus:`Durumu Oku`,readStatusDescription:`Yazıcı durumunu ve kuyruğu görüntüle`,manageQueue:`Kuyruğu Yönet`,manageQueueDescription:`Baskı kuyruğundan öğe ekle ve kaldır`,controlPrinter:`Yazıcıyı Kontrol Et`,controlPrinterDescription:`Baskıları duraklat, devam ettir ve durdur`,manageLibrary:`Kütüphaneyi Yönet`,manageLibraryDescription:`Kütüphane dosyalarını yükle, yeniden adlandır ve sil; MakerWorld'den model içe aktar`,manageInventory:`Envanteri Yönet`,manageInventoryDescription:`Makaraları ve envanter kayıtlarını oluştur, güncelle ve sil. SpoolBuddy kiosklar (NFC tarama, tartı okumaları, kiosk sistem komutları) için gereklidir.`,libraryBadge:`Kütüphane`,inventoryBadge:`Envanter`,cloudAccess:`Bulut erişimine izin ver`,cloudAccessDescription:`Adınıza Bambu Bulut ön ayarlarını ve filamentleri okuyun. Bambu Bulut'a giriş yapmış olmanız gerekir.`,cloudBadge:`Bulut`,updateEnergyCost:`Elektrik fiyatını güncelle`,updateEnergyCostDescription:`Bu anahtarın /settings/electricity-price üzerine yeni bir kWh başına elektrik fiyatı POST etmesine izin ver. Home Assistant dinamik tarife otomasyonları (Tibber, Octopus, vb.) için kullanışlıdır. Bu, API anahtarıyla yazılabilen tek ayar alanıdır.`,energyCostBadge:`Enerji`,legacyKey:`Eski`,legacyKeyTooltip:`Kullanıcı başına sahiplikten önce oluşturuldu; bulut erişimini kullanmak için yeniden oluşturun`,unnamedKey:`Adsız Anahtar`,lastUsed:`Son kullanım`,read:`Oku`,control:`Kontrol`,createFirstKey:`İlk Anahtarınızı Oluşturun`,webhookEndpoints:`Webhook Uç Noktaları`,webhookApiKeyHint:`API anahtarınızı X-API-Key başlığında kullanın.`,webhook:{getAllStatus:`Tüm yazıcı durumlarını al`,getSpecificStatus:`Belirli yazıcı durumunu al`,addToQueue:`Baskı kuyruğuna ekle`,pausePrint:`Baskıyı duraklat`,resumePrint:`Baskıya devam et`,stopPrint:`Baskıyı durdur`},apiBrowser:`API Tarayıcısı`,apiBrowserDescription:`Mevcut tüm API uç noktalarını keşfedin ve test edin.`,apiKeyForTesting:`Test için API Anahtarı`,apiKeyPlaceholder:`Kimlik doğrulamalı uç noktaları test etmek için API anahtarınızı buraya yapıştırın...`,apiKeyHint:`Bu anahtar isteklerle birlikte X-API-Key başlığı olarak gönderilecek.`,deleteApiKeyTitle:`API Anahtarını Sil`,deleteApiKeyMessage:`Bu API anahtarını silmek istediğinizden emin misiniz? Bu anahtarı kullanan tüm entegrasyonlar çalışmayı durduracak.`,deleteKey:`Anahtarı Sil`,amsDisplayThresholds:`AMS Görüntü Eşikleri`,amsThresholdsDescription:`AMS nem ve sıcaklık göstergeleri için renk eşiklerini yapılandırın.`,humidity:`Nem`,goodGreen:`İyi (yeşil)`,fairOrange:`Orta (turuncu)`,aboveFairBad:`Orta eşiğin üstü kırmızı olarak gösterilir (kötü)`,fairAlsoDryingThreshold:`Bu eşik aynı zamanda etkinleştirildiğinde otomatik kurutmayı tetiklemek için de kullanılır`,temperature:`Sıcaklık`,goodBlue:`İyi (mavi)`,aboveFairHot:`Orta eşiğin üstü kırmızı olarak gösterilir (sıcak)`,historyRetention:`Geçmiş Saklama`,keepSensorHistory:`Sensör geçmişini sakla`,historyRetentionDescription:`Daha eski nem ve sıcaklık verileri otomatik olarak silinecek`,defaultPrintOptions:`Varsayılan Baskı Seçenekleri`,defaultPrintOptionsDescription:`Yeni baskılar başlatılırken baskı seçenekleri için varsayılan değerleri ayarlayın. Bunlar baskı iletişim kutusunda baskı başına geçersiz kılınabilir.`,defaultBedLevelling:`Tabla Seviyelendirme`,defaultBedLevellingDesc:`Baskıdan önce tablayı otomatik seviyelendir`,defaultFlowCali:`Akış Kalibrasyonu`,defaultFlowCaliDesc:`Ekstrüzyon akışını kalibre et`,defaultVibrationCali:`Titreşim Kalibrasyonu`,defaultVibrationCaliDesc:`Çınlama artefaktlarını azalt`,defaultLayerInspect:`İlk Katman Denetimi`,defaultLayerInspectDesc:`İlk katmanın AI denetimi`,defaultTimelapse:`Zaman Atlamalı Video`,defaultTimelapseDesc:`Zaman atlamalı video kaydet`,defaultNozzleOffsetCali:`Nozül Ofset Kalibrasyonu`,defaultNozzleOffsetCaliDesc:`Ekstrüderler arasındaki nozül ofsetlerini kalibre et`,tempFanPresetsTitle:`Sıcaklık ve Fan Ön Ayarları`,tempFanPresetsDescription:`Yazıcı kartı sıcaklık ve fan hızı pencerelerinde gösterilen hızlı seçim değerlerini özelleştirin. Kapalı düğmesi her zaman gösterilir.`,tempFanPresetsNozzle:`Nozül sıcaklığı`,tempFanPresetsBed:`Tabla sıcaklığı`,tempFanPresetsChamber:`Hazne sıcaklığı`,tempFanPresetsFan:`Fan hızı`,tempFanPresetsReset:`Varsayılanlara sıfırla`,staggeredStart:`Kademeli Başlatma`,staggeredStartDescription:`Çoklu yazıcı toplu başlatmaları kademelendirilirken varsayılan grup boyutu ve aralığı. Baskı modalinde yığın başına geçersiz kılınabilir.`,plateClear:`Plaka Temizleme Onayı`,requirePlateClear:`Plaka temizleme onayı gerektir`,requirePlateClearDescription:`Etkinleştirildiğinde, planlayıcı bitmiş işleri olan yazıcılarda kuyruktaki baskıları başlatmadan önce yazıcı başına plaka temizleme onayını bekler. Bunu devre dışı bırakmak ayrıca plaka durum rozetini ve yazıcı kartlarındaki "Plakayı temizlendi olarak işaretle" düğmesini gizler.`,gcodeInjection:`G-kod Enjeksiyonu`,gcodeInjectionDescription:`Farmloop, SwapMod, AutoClear ve Printflow 3D gibi otomatik baskı sistemleri için baskıların başlangıcında ve/veya sonunda enjekte edilecek özel G-kodu yapılandırın. Parçacıklar yazıcı modeli başına yapılandırılır ve bir kuyruk öğesinde "G-kod Enjekte Et" etkinleştirildiğinde uygulanır.`,gcodeInjectionNoPrinters:`Yazıcı bulunamadı. G-kod parçacıklarını yapılandırmak için yazıcı ekleyin.`,gcodeStartLabel:`Başlangıç G-kodu`,gcodeEndLabel:`Bitiş G-kodu`,gcodeStartPlaceholder:`Baskı başlamadan önce eklenecek G-kodu...`,gcodeEndPlaceholder:`Baskı bittikten sonra eklenecek G-kodu...`,staggerGroupSize:`Grup boyutu`,staggerGroupSizeHelp:`Grup başına eş zamanlı başlatılacak yazıcılar`,staggerInterval:`Aralık (dakika)`,staggerIntervalHelp:`Her grubun başlatılması arasındaki gecikme`,queueDrying:`Kuyruk Otomatik Kurutma`,queueDryingDescription:`Kuyruktaki baskılar arasında yazıcı boştayken AMS filamentini otomatik olarak kurut. Kurutmayı tetiklemek için yukarıdaki nem eşiğini kullanır.`,queueDryingEnabled:`Otomatik kurutmayı etkinleştir`,queueDryingEnabledDescription:`Yazıcı boştayken ve nem eşiğin üzerindeyken AMS kurutmasını otomatik olarak başlat`,queueDryingBlock:`Kurutmanın tamamlanmasını bekle`,queueDryingBlockDescription:`Kurutma bitene kadar baskı kuyruğunu engelle. Kapalıyken, baskılar kurutmadan önceliklidir.`,ambientDryingEnabled:`Ortam kurutma`,ambientDryingEnabledDescription:`Kuyrukta baskı olmasa bile, nem eşiği aştığında boşta yazıcılarda filamenti otomatik olarak kurut.`,dryingPresets:`Kurutma Ön Ayarları`,dryingPresetsDescription:`Filament türü başına sıcaklık ve süre. AMS 2 Pro daha düşük sıcaklıklar kullanır, AMS-HT daha yüksek sıcaklıkları destekler.`,dryingFilament:`Filament`,humidityThresholds:`Nem Eşikleri`,humidityThresholdsDescription:`Otomatik kurutma ve alarmlar için filament türüne göre nem tetikleyici. Tek AMS'te karışık yükler en düşük eşiği kullanır.`,humidityThresholdCol:`Eşik`,humidityThresholdDefault:`Varsayılan (bilinmeyen türler)`,printModal:`Baskı Modali`,expandCustomMapping:`Özel eşlemeyi varsayılan olarak genişlet`,expandCustomMappingDescription:`Birden fazla yazıcıya yazdırırken, yazıcı başına AMS eşlemesini genişletilmiş olarak göster`,authentication:`Kimlik Doğrulama`,authEnabledDescription:`Örneğiniz kullanıcı kimlik doğrulamayla güvende`,authDisabledDescription:`Girişi gerektirmek ve kullanıcı erişimini yönetmek için etkinleştir`,authDisabledMessage:`Kullanıcı hesapları oluşturmak, izinleri yönetmek ve Bambuddy örneğinizi güvende tutmak için kimlik doğrulamayı etkinleştirin.`,enableAuthentication:`Kimlik Doğrulamayı Etkinleştir`,currentUser:`Mevcut Kullanıcı`,changePassword:`Parolayı Değiştir`,admin:`Yönetici`,users:`Kullanıcılar`,addUser:`Kullanıcı Ekle`,groups:`Gruplar`,addGroup:`Grup Ekle`,system:`Sistem`,noDescription:`Açıklama yok`,userCount:`{{count}} kullanıcı`,permissionCount:`{{count}} izin`,createUser:`Kullanıcı Oluştur`,username:`Kullanıcı Adı`,enterUsername:`Kullanıcı adı girin`,password:`Parola`,enterPassword:`Parola girin`,passwordRequirements:`En az 8 karakter, bir büyük harf, bir küçük harf, bir rakam ve bir özel karakter ile.`,confirmPassword:`Parolayı Onayla`,confirmPasswordPlaceholder:`Parolayı onayla`,viewReleaseOnGitHub:`Yayını GitHub'da görüntüle`,turnAllPlugsOn:`Tüm prizleri aç`,turnAllPlugsOff:`Tüm prizleri kapat`,clearNotificationLogs:`Bildirim Günlüklerini Temizle`,clearLogsMessage:`Bu, 30 günden eski tüm bildirim günlüklerini kalıcı olarak silecek. Bu işlem geri alınamaz.`,clearLogs:`Günlükleri Temizle`,resetUiPreferences:`Arayüz Tercihlerini Sıfırla`,resetUiPreferencesMessage:`Bu, tüm arayüz tercihlerini varsayılana sıfırlayacak: kenar çubuğu sırası, tema, gösterge paneli düzeni, görünüm modları ve sıralama tercihleri. Yazıcılarınız, arşivleriniz ve sunucu ayarlarınız ETKİLENMEYECEK. Sayfa temizleme sonrası yeniden yüklenecek.`,resetPreferences:`Tercihleri Sıfırla`,deleteGroupTitle:`Grubu Sil`,deleteGroupMessage:`Bu grubu silmek istediğinizden emin misiniz? Bu gruptaki kullanıcılar bu izinleri kaybedecek.`,deleteGroup:`Grubu Sil`,disableAuthenticationTitle:`Kimlik Doğrulamayı Devre Dışı Bırak`,disableAuthenticationMessage:`Kimlik doğrulamayı devre dışı bırakmak istediğinizden emin misiniz? Bu, Bambuddy örneğinizi giriş yapmadan erişilebilir hale getirecek. Tüm kullanıcılar veritabanında kalacak ancak kimlik doğrulama devre dışı bırakılacak.`,disableAuthentication:`Kimlik Doğrulamayı Devre Dışı Bırak`,configureBambuddy:`Bambuddy'yi Yapılandır`,systemDefault:`Sistem Varsayılanı`,archiveSettings:`Arşiv Ayarları`,newWindow:`Yeni Pencere`,embeddedOverlay:`Gömülü Bindirme`,preferredSlicer:`Tercih Edilen Dilimleyici`,preferredSlicerDescription:`Uygulama içi dilimleme için API yardımcı kabıyla kullanılan dilimleyici`,openInSlicerLabel:`Dilimleyicide Aç`,openInSlicerInherit:`API dilimleyicisiyle aynı`,openInSlicerDescription:`'Dilimleyicide Aç' düğmesinin kullandığı masaüstü dilimleyici. Devralmak için 'API dilimleyicisiyle aynı' bırakın veya yerel olarak kullanmak için farklı bir dilimleyici seçin.`,orcaslicerKnownIssuesWarning:`OrcaSlicer 2.3.2 / 2.4.0-dev, birçok Bambu yazılı 3MF'nin dilimlenmesini engelleyen bilinen CLI hatalarına sahiptir — yukarı yöndeki #12426 (boyalı çok ekstrüderli dosyalarda segfault) ve #13386 (parametre aralığı katı doğrulama reddi) sorunlarına bakın. Yukarı yön düzeltmeler gelene kadar Bambu Studio önerilir.`,useSlicerApi:`Dilimleyici API kullan`,useSlicerApiDescription:`Açıkken, "Dilimle" eylemleri uygulama içi dilimleyici modalini açar ve dilimleyici-API yardımcı bileşenini çağırır. Kapalıyken (varsayılan), URI şeması üzerinden masaüstü dilimleyiciye devredilirler.`,slicerCard:`Dilimleyici`,orcaslicerApiUrl:`OrcaSlicer yardımcı bileşen URL`,bambuStudioApiUrl:`Bambu Studio yardımcı bileşen URL`,slicerApiUrlDescription:`Dilimleyici-API yardımcı bileşen konteynerinin URL'si. SLICER_API_URL / BAMBU_STUDIO_API_URL ortam değişkeni varsayılanlarını kullanmak için boş bırakın.`,slicerBundlesRemoved:{title:`Dilimleyici Paketleri (kaldırıldı)`,description:`Yazıcı Ön Ayar Paketi (.bbscfg) içe aktarma kaldırıldı. BambuStudio'nun paket dışa aktarması yalnızca kullanıcı tarafından özelleştirilmiş ön ayarları içerir, bu nedenle içe aktarma hiçbir zaman standart süreçleri / filamentleri sağlamadı ve dilimleme gömülü ayarlara geri döndü.`,alternatives:`Bireysel özelleştirmeler için Tekli Ön Ayar İçe Aktarma'yı kullanın veya Bambu Cloud / Orca Cloud üzerinden senkronize edin. Standart ön ayarlar otomatik olarak dilimleyici sidecar'ından gelir.`,lookupOrder:`Dilimleme sırasında ön ayar arama sırası: 1) İçe aktarılmış (yerel), 2) Orca Cloud, 3) Bambu Cloud, 4) Standart (sidecar yedeği).`},externalCameras:`Harici Kameralar`,costTracking:`Maliyet Takibi`,printsOnly:`Yalnızca Baskılar`,totalConsumption:`Toplam Tüketim`,dataManagement:`Veri Yönetimi`,storageUsage:`Depolama Kullanımı`,storageUsageDescription:`Kategoriye göre veri kullanımı dökümü`,storageUsageTotal:`Toplam`,storageUsageErrors:`Hatalar`,storageUsageOtherBreakdown:`Diğer (statik varlıklar, betikler ve yapılandırma dosyaları dahil)`,storageUsageSystem:`Sistem`,storageUsageData:`Veri`,storageUsageUnavailable:`Depolama kullanım bilgisi mevcut değil`,clearNotificationLogsDescription:`30 günden eski bildirim günlüklerini sil`,resetUiPreferencesDescription:`Kenar çubuğu sırası, tema, görünüm modları ve düzen tercihlerini sıfırla. Yazıcılar, arşivler ve ayarlar etkilenmez.`,enableHomeAssistant:`Home Assistant'ı Etkinleştir`,enableMqtt:`MQTT'yi Etkinleştir`,useTls:`TLS Kullan`,enableMetricsEndpoint:`Metrikler Uç Noktasını Etkinleştir`,availableMetrics:`Kullanılabilir Metrikler`,editUser:`Kullanıcıyı Düzenle`,deleteUserTitle:`Kullanıcıyı Sil`,groupName:`Grup Adı`,leaveEmptyForAnonymous:`Anonim için boş bırakın`,leaveEmptyForNoAuth:`Kimlik doğrulama olmaması için boş bırakın`,enterNewPassword:`Yeni parola girin`,confirmNewPassword:`Yeni parolayı onayla`,enterGroupName:`Grup adını girin`,enterDescriptionOptional:`Açıklama girin (isteğe bağlı)`,enterCurrentPassword:`Mevcut parolayı girin`,enterNewPasswordMin6:`Yeni parolayı girin (en az 6 karakter)`,toast:{keyCopied:`Anahtar panoya kopyalandı`,copyFailed:`Anahtar kopyalanamadı`,keyAddedToBrowser:`Anahtar API Tarayıcısına eklendi`,clearLogsFailed:`Günlükler temizlenemedi`,uiPreferencesReset:`Arayüz tercihleri sıfırlandı. Yenileniyor...`,authDisabled:`Kimlik doğrulama başarıyla devre dışı bırakıldı`,authDisableFailed:`Kimlik doğrulama devre dışı bırakılamadı`,apiKeyCreated:`API anahtarı oluşturuldu`,apiKeyDeleted:`API anahtarı silindi`,userCreated:`Kullanıcı başarıyla oluşturuldu`,userUpdated:`Kullanıcı başarıyla güncellendi`,userDeleted:`Kullanıcı başarıyla silindi`,groupCreated:`Grup başarıyla oluşturuldu`,groupUpdated:`Grup başarıyla güncellendi`,groupDeleted:`Grup başarıyla silindi`,fillRequiredFields:`Lütfen tüm zorunlu alanları doldurun`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 8 karakter olmalı`,passwordNeedsUppercase:`Parola en az bir büyük harf içermeli`,passwordNeedsLowercase:`Parola en az bir küçük harf içermeli`,passwordNeedsDigit:`Parola en az bir rakam içermeli`,passwordNeedsSpecial:`Parola en az bir özel karakter içermeli`,enterGroupName:`Lütfen bir grup adı girin`,settingsSaved:`Ayarlar kaydedildi`,noPermissionUpdate:`Ayarları değiştirme izniniz yok`,cameraSettingsSaved:`Kamera ayarları kaydedildi`,enterCameraUrl:`Lütfen bir kamera URL'si girin`,passwordChanged:`Parola başarıyla değiştirildi`,connectionFailed:`Bağlantı başarısız`,testFailed:`Test başarısız`,cameraConnected:`Kamera bağlandı{{resolution}}`},testConnection:`Bağlantıyı Test Et`,catalog:{spoolCatalog:`Makara Kataloğu`,spoolCatalogDescription:`Marka/türe göre boş makara ağırlıkları. Makara eklerken otomatik ağırlık araması için kullanılır.`,searchCatalog:`Katalogda ara...`,addNewEntry:`Yeni Giriş Ekle`,namePlaceholder:`Ad (örn., Bambu Lab - Plastik)`,weight:`Ağırlık`,type:`Tür`,default:`Varsayılan`,custom:`Özel`,noMatch:`Aramanızla eşleşen giriş yok`,empty:`Katalogda giriş yok`,deleteEntry:`Girişi Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,resetCatalog:`Kataloğu Sıfırla`,resetConfirm:`Katalog varsayılana sıfırlansın mı? Bu, tüm özel girişleri kaldıracak.`,loadFailed:`Makara kataloğu yüklenemedi`,nameWeightRequired:`Ad ve ağırlık gereklidir`,entryAdded:`Giriş eklendi`,addFailed:`Giriş eklenemedi`,entryUpdated:`Giriş güncellendi`,updateFailed:`Giriş güncellenemedi`,entryDeleted:`Giriş silindi`,deleteFailed:`Giriş silinemedi`,resetSuccess:`Katalog varsayılana sıfırlandı`,resetFailed:`Katalog sıfırlanamadı`,exported:`{{count}} giriş dışa aktarıldı`,imported:`{{added}} giriş içe aktarıldı ({{skipped}} atlandı)`,importFailed:`İçe aktarma başarısız: geçersiz JSON formatı`,exportTooltip:`Kataloğu JSON'a dışa aktar`,importTooltip:`Kataloğu JSON'dan içe aktar`,resetTooltip:`Varsayılana sıfırla`,selectedCount:`{{count}} seçildi`,deleteSelected:`Seçilenleri Sil`,bulkDeleteConfirm:`{{count}} girişi silmek istediğinizden emin misiniz?`,bulkDeleted:`{{count}} giriş silindi`,bulkDeleteFailed:`Girişler silinemedi`,material:`Malzeme`,spoolWeight:`Makara Ağırlığı`,color:`Renk`,updateSpoolWeight:`Makara Ağırlığını Güncelle`,filamentUpdated:`Filament güncellendi`,filamentUpdateFailed:`Filament güncellenemedi`,filamentUpdateInvalid:`Geçersiz filament verisi`,keepExistingSpoolWeight:`Mevcut makaralar için eski ağırlığı koru`,keepExistingSpoolWeightDesc:`Bu filament türüyle önceden oluşturulmuş makaralar eski boş ağırlığı korur. Yeni makaralar güncellenmiş değeri kullanır.`,applyToAllSpools:`Tüm makaralara uygula`,applyToAllSpoolsDesc:`Bu filament türü için tüm ağırlık hesaplamaları hemen yeni boş ağırlığı kullanır.`},colorCatalog:{title:`Renk Kataloğu`,description:`Üreticiye/malzemeye göre filament renkleri. Makara eklerken otomatik renk araması için kullanılır.`,searchColors:`Renklerde ara...`,allManufacturers:`Tüm üreticiler`,addNewColor:`Yeni Renk Ekle`,manufacturer:`Üretici`,colorName:`Renk Adı`,hex:`Hex`,materialOptional:`Malzeme (isteğe bağlı)`,showing:`{{total}} renkten {{filtered}} tanesi gösteriliyor`,noMatch:`Aramanızla eşleşen renk yok`,empty:`Katalogda renk yok`,deleteColor:`Rengi Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,resetCatalog:`Renk Kataloğunu Sıfırla`,resetConfirm:`Katalog varsayılana sıfırlansın mı? Bu, tüm özel renkleri kaldıracak.`,sync:`Senkronize Et`,starting:`Başlatılıyor...`,syncTooltip:`FilamentColors.xyz'den senkronize et (2000+ renk, bir dakika sürebilir)`,loadFailed:`Renk kataloğu yüklenemedi`,fieldsRequired:`Üretici, renk adı ve hex renk gereklidir`,colorAdded:`Renk eklendi`,addFailed:`Renk eklenemedi`,colorUpdated:`Renk güncellendi`,updateFailed:`Renk güncellenemedi`,colorDeleted:`Renk silindi`,deleteFailed:`Renk silinemedi`,resetSuccess:`Renk kataloğu varsayılana sıfırlandı`,resetFailed:`Katalog sıfırlanamadı`,syncUpToDate:`Zaten güncel ({{count}} renk kontrol edildi)`,syncComplete:`{{added}} yeni renk eklendi ({{skipped}} zaten mevcuttu)`,syncError:`Senkronizasyon hatası`,syncFailed:`FilamentColors.xyz'den senkronize edilemedi`,exported:`{{count}} renk dışa aktarıldı`,imported:`{{added}} renk içe aktarıldı ({{skipped}} atlandı)`,importFailed:`İçe aktarma başarısız: geçersiz JSON formatı`,selectedCount:`{{count}} seçildi`,deleteSelected:`Seçilenleri Sil`,bulkDeleteConfirm:`{{count}} rengi silmek istediğinizden emin misiniz?`,bulkDeleted:`{{count}} renk silindi`,bulkDeleteFailed:`Renkler silinemedi`},dateFormat:`Tarih Formatı`,dateFormatUs:`ABD (AA/GG/YYYY)`,dateFormatEu:`AB (GG/AA/YYYY)`,dateFormatIso:`ISO (YYYY-AA-GG)`,timeFormat:`Saat Formatı`,timeFormat12:`12 saat (3:30 PM)`,timeFormat24:`24 saat (15:30)`,defaultPrinter:`Varsayılan Yazıcı`,defaultPrinterDescription:`Yüklemeler, tekrar baskılar ve diğer işlemler için bu yazıcıyı önceden seç.`,slicerBambuStudio:`Bambu Studio`,slicerOrcaSlicer:`OrcaSlicer`,sidebarOrderDescription:`Öğeleri yeniden sıralamak, görünürlüğü sıfırlamak ve özel bağlantıları yönetmek için Kenar çubuğu düzenini kullanın.`,setDefault:`Varsayılan Yap`,sidebarOrderSetDefaultHint:`Varsayılan ayarla, mevcut menü sırasını henüz özelleştirmemiş kullanıcılara uygular.`,sidebarDefaultSet:`Varsayılan menü sırası ayarlandı.`,sidebarDefaultCleared:`Varsayılan menü sırası temizlendi.`,sidebarDefaultFailed:`Varsayılan menü sırası ayarlanamadı.`,reset:`Sıfırla`,darkMode:`Koyu Mod`,lightMode:`Açık Mod`,active:`(aktif)`,background:`Arka Plan`,accent:`Vurgu`,style:`Stil`,bgNeutral:`Nötr`,bgWarm:`Sıcak`,bgCool:`Soğuk`,bgOled:`OLED Siyah`,bgSlate:`Arduvaz Mavisi`,bgForest:`Orman Yeşili`,accentGreen:`Yeşil`,accentTeal:`Camgöbeği`,accentBlue:`Mavi`,accentOrange:`Turuncu`,accentPurple:`Mor`,accentRed:`Kırmızı`,styleClassic:`Klasik`,styleGlow:`Parıltı`,styleVibrant:`Canlı`,themeToggleHint:`Kenar çubuğundaki güneş/ay simgesini kullanarak koyu ve açık mod arasında geçiş yapın.`,autoArchivePrints:`Baskıları otomatik arşivle`,autoArchiveDescription:`Baskılar tamamlandığında 3MF dosyalarını otomatik olarak kaydet`,saveThumbnailsDescription:`3MF dosyalarından önizleme görüntülerini çıkar ve kaydet`,captureFinishPhotoDescription:`Baskı tamamlandığında yazıcı kamerasından bir fotoğraf çek. Bambuddy, baskı sırasında kısa bir zaman atlamalı kayıt yapar, böylece fotoğraf tabla inmeden önceki andan alınabilir. Bu baskı için zaman atlamalı kaydı etkinleştirdiyseniz dosya saklanır, aksi takdirde fotoğraf çekildikten sonra otomatik olarak silinir.`,ffmpegNotInstalled:`ffmpeg yüklü değil`,ffmpegRequired:`Kamera yakalama ffmpeg gerektirir. brew install ffmpeg (macOS) veya apt install ffmpeg (Linux) ile yükleyin.`,camera:`Kamera`,cameraViewMode:`Kamera Görüntüleme Modu`,cameraOverlayDescription:`Kamera ana ekranda yeniden boyutlandırılabilir bir bindirmede açılır`,cameraWindowDescription:`Kamera ayrı bir tarayıcı penceresinde açılır`,externalCamerasDescription:`Yerleşik yazıcı kamerasını değiştirmek için harici kameraları yapılandırın. MJPEG akışlarını, RTSP, HTTP anlık görüntüleri ve USB kameralarını (V4L2) destekler. Etkinleştirildiğinde, harici kamera canlı görüntüleme ve bitiş fotoğrafları için kullanılır.`,cameraPlaceholderUsb:`Cihaz yolu (/dev/video0)`,cameraPlaceholderUrl:`Kamera URL'si (rtsp://... veya http://...)`,cameraTypeMjpeg:`MJPEG Akışı`,cameraTypeRtsp:`RTSP Akışı`,cameraTypeSnapshot:`HTTP Anlık Görüntü`,cameraTypeUsb:`USB Kamera (V4L2)`,cameraSnapshotUrl:`Anlık Görüntü URL (isteğe bağlı)`,cameraSnapshotUrlPlaceholder:`http://192.168.1.61:1984/api/frame.jpeg?src=printer`,cameraSnapshotUrlHelp:`Bildirim küçük resimleri, bitiş fotoğrafları, katman zaman atlamalı kareler ve plaka algılama için kullanılan tek kare URL'si. Zaman atlamalı video ve plaka algılama, her birinin kendi yazıcı başına anahtarı gerektirir — bu URL yalnızca aktif olduklarında çektikleri görüntü kaynağıdır. Yukarıdaki canlı akıştan yakalamak için boş bırakın. go2rtc (/api/frame.jpeg) ve özel anlık görüntü uç noktasına sahip IP kameraları için kullanışlıdır.`,cameraRotation:`Döndürme`,test:`Test`,connected:`Bağlı`,disconnected:`Bağlı değil`,currency:`Para Birimi`,defaultFilamentCost:`Varsayılan filament maliyeti (kg başına)`,electricityCost:`kWh başına elektrik maliyeti`,energyDisplayMode:`Enerji görüntüleme modu`,energyModePrintDescription:`Gösterge paneli, baskılar sırasında kullanılan enerji toplamını gösterir`,energyModeTotalDescription:`Gösterge paneli, akıllı prizlerden ömür boyu enerjiyi gösterir`,fileManager:`Dosya Yöneticisi`,createArchiveEntry:`Yazdırırken Arşiv Girişi Oluştur`,createArchiveEntryDescription:`Dosya Yöneticisinden yazdırırken isteğe bağlı olarak bir arşiv girişi oluştur`,lowDiskSpaceWarning:`Düşük Disk Alanı Uyarısı`,lowDiskSpaceDescription:`Boş disk alanı bu eşiğin altına düştüğünde uyarı göster`,printerFirmware:`Yazıcı Firmware`,checkFirmwareDescription:`Bambu Lab'dan yazıcı firmware güncellemelerini kontrol et`,bambuddySoftware:`Bambuddy Yazılımı`,autoCheckDescription:`Başlangıçta otomatik olarak yeni sürümleri kontrol et`,checkNow:`Şimdi kontrol et`,updateAvailableVersion:`Güncelleme mevcut: v{{version}}`,releaseNotes:`Sürüm Notları`,updateViaDocker:`Docker Compose ile güncelle:`,updateViaHomeAssistant:`Güncellemeler Home Assistant Supervisor tarafından yönetilir. Yeni sürümü yüklemek için Home Assistant'ta Ayarlar → Eklentiler → Bambuddy'ye gidin.`,updateViaWindowsInstaller:`Windows kurulumları, kurucu yeniden çalıştırılarak güncellenir. Yeni sürümü aşağıdan indirin — verileriniz, ayarlarınız ve yazıcılarınız korunur.`,downloadWindowsInstaller:`v{{version}} için kurucuyu indir`,installUpdate:`Güncellemeyi Yükle`,latestVersionRunning:`En son sürümü çalıştırıyorsunuz`,failedToCheckUpdates:`Güncellemeler kontrol edilemedi: {{error}}`,backupRestore:`Yedekleme ve Geri Yükleme`,backupRestoreDescription:`Ayarları dışa/içe aktar ve GitHub yedeklemesini yapılandır`,goToBackup:`Yedeklemeye Git`,externalUrl:`Harici URL`,externalUrlDescription:`Bambuddy'nin erişilebildiği harici URL. Bildirim görüntüleri ve harici entegrasyonlar için kullanılır.`,bambuddyUrl:`Bambuddy URL`,externalUrlHint:`Protokol ve port dahil edin (örn., http://192.168.1.100:8000)`,ftpRetry:`FTP Yeniden Dene`,ftpRetryDescription:`Yazıcı WiFi güvenilmez olduğunda FTP işlemlerini yeniden dene. 3MF indirmelerine, baskı yüklemelerine, zaman atlamalı video indirmelerine ve firmware güncellemelerine uygulanır.`,autoRetryDescription:`Başarısız FTP işlemlerini otomatik olarak yeniden dene`,retryAttempts:`Yeniden deneme sayısı`,retryDelay:`Yeniden deneme gecikmesi`,connectionTimeout:`Bağlantı zaman aşımı`,time_one:`{{count}} kez`,time_other:`{{count}} kez`,second_one:`{{count}} saniye`,second_other:`{{count}} saniye`,nSeconds:`{{count}} saniye`,increaseForWeakWifi:`Zayıf WiFi'li yazıcılar için artırın`,homeAssistant:`Home Assistant`,homeAssistantFullDescription:`HA'nın REST API'si üzerinden akıllı prizleri kontrol etmek için Home Assistant'a bağlanın. switch, light, input_boolean ve script varlıklarını destekler.`,homeAssistantUrl:`Home Assistant URL`,longLivedAccessToken:`Uzun Ömürlü Erişim Belirteci`,haTokenHint:`HA'da belirteç oluşturun: Profil → Uzun Ömürlü Erişim Belirteçleri → Belirteç Oluştur`,connectionSuccessful:`Bağlantı Başarılı`,connectionFailed:`Bağlantı Başarısız`,haConnectionSuccess:`Home Assistant'a başarıyla bağlanıldı.`,haConnectionFailed:`Home Assistant'a bağlanılamadı.`,mqttPublishing:`MQTT Yayınlama`,mqttDescription:`Node-RED, Home Assistant ve diğer otomasyon sistemleriyle entegrasyon için BamBuddy olaylarını harici bir MQTT brokerına yayınla.`,mqttEnableDescription:`Olayları harici MQTT brokerına yayınla`,brokerHostname:`Broker ana bilgisayar adı`,port:`Port`,usernameOptional:`Kullanıcı adı (isteğe bağlı)`,passwordOptional:`Parola (isteğe bağlı)`,topicPrefix:`Konu öneki`,topicPrefixHint:`Konular: {{prefix}}/printers//status, vb. olacak`,prometheusMetrics:`Prometheus Metrikleri`,prometheusEndpointDescription:`Prometheus/Grafana izleme için yazıcı metriklerini /api/v1/metrics adresinde sun.`,bearerTokenOptional:`Bearer Belirteci (isteğe bağlı)`,bearerTokenHint:`Ayarlandıysa, isteklerin Authorization: Bearer içermesi gerekir`,metricsConnectionStatus:`Bağlantı durumu`,metricsPrinterState:`Yazıcı durumu (boşta/yazdırılıyor/vb.)`,metricsPrintProgress:`Baskı ilerlemesi 0-100%`,metricsBedTemp:`Tabla sıcaklığı`,metricsNozzleTemp:`Nozul sıcaklığı`,metricsPrintsTotal:`Sonuca göre toplam baskılar`,metricsMore:`...ve daha fazlası (katmanlar, fanlar, kuyruk, filament kullanımı)`,smartPlugsDescription:`Güç kontrolünü otomatikleştirmek ve yazıcılarınız için enerji kullanımını takip etmek üzere akıllı prizleri (Tasmota veya Home Assistant) bağlayın.`,allOn:`Tümü Açık`,allOff:`Tümü Kapalı`,addSmartPlug:`Akıllı Priz Ekle`,energySummary:`Enerji Özeti`,currentPower:`Mevcut Güç`,plugsOnline:`{{reachable}}/{{total}} priz çevrimiçi`,today:`Bugün`,yesterday:`Dün`,total:`Toplam`,enablePlugsForSummary:`Enerji özetini görmek için prizleri etkinleştirin`,addNotificationProvider:`Ekle`,systemBadge:`(Sistem)`,creating:`Oluşturuluyor...`,changing:`Değiştiriliyor...`,deleteUserAndItems:`Kullanıcıyı VE öğelerini sil`,deleteUserKeepItems:`Kullanıcıyı sil, öğeleri tut (sahipsiz olur)`,ok:`Tamam`,twoFa:{totpTitle:`Doğrulayıcı Uygulama (TOTP)`,totpDesc:`Google Authenticator, Aegis veya Authy gibi bir doğrulayıcı uygulama kullanın.`,emailOtpTitle:`E-posta OTP`,emailOtpDesc:`Giriş yaptığınızda {{email}} adresine tek seferlik bir kod gönder.`,emailOtpNoEmail:`Bu yöntemi etkinleştirmek için hesabınıza bir e-posta adresi ekleyin.`,addEmailFirst:`Hesabınızın e-posta adresi yok. E-posta OTP'yi etkinleştirmeden önce bir yöneticiden eklemesini isteyin.`,setupTotp:`Doğrulayıcı Uygulamayı Ayarla`,setupAuthApp:`Doğrulayıcı Uygulamayı Ayarla`,setupInstructions:`Aşağıdaki QR kodunu doğrulayıcı uygulamanızla tarayın, ardından bir kodla onaylayın.`,manualEntry:`Tarayamıyor musunuz? Bu gizli anahtarı manuel olarak girin:`,scannedContinue:`Kodu taradım — devam et`,enterCodeToConfirm:`Kurulumu onaylamak için doğrulayıcı uygulamanızdan 6 haneli kodu girin.`,activate:`Etkinleştir`,disableTotp:`Doğrulayıcıyı Devre Dışı Bırak`,disableConfirmHint:`Doğrulayıcıyı devre dışı bırakmak için geçerli bir TOTP kodu veya yedek kod girin.`,totpDisabled:`Doğrulayıcı uygulama devre dışı bırakıldı.`,emailOtpEnabled:`E-posta OTP etkinleştirildi.`,emailOtpDisabled:`E-posta OTP devre dışı bırakıldı.`,smtpRequired:`Lütfen önce SMTP ayarlarını yapılandırın ve test edin.`,invalidCode:`Geçersiz kod. Lütfen tekrar deneyin.`,enableEmailOtp:`E-posta OTP'yi Etkinleştir`,disableEmailOtp:`E-posta OTP'yi Devre Dışı Bırak`,emailSetupEnterCode:`E-posta adresinize bir doğrulama kodu gönderildi. Bu kutunun sahibi olduğunuzu onaylamak için aşağıya girin.`,verifyAndEnable:`Doğrula ve Etkinleştir`,emailDisablePasswordHint:`E-posta OTP'yi devre dışı bırakmayı onaylamak için hesap parolanızı girin.`,passwordPlaceholder:`Parolanızı girin`,backupCodesTitle:`Yedek kodlarınızı kaydedin`,backupCodesWarning:`Bu kodları güvenli bir yere kaydedin. Her kod yalnızca bir kez kullanılabilir ve tekrar gösterilmeyecektir.`,backupCodesRemaining:`{{count}} yedek kod kaldı`,savedCodes:`Kodlarımı kaydettim`,regenBackup:`Yedek Kodları Yeniden Oluştur`,regenBackupHint:`10 yeni yedek kod oluşturmak için mevcut TOTP kodunuzu girin. Mevcut tüm yedek kodlar geçersiz kılınacak.`,newBackupCodes:`Yeni yedek kodlar`,linkedAccounts:`Bağlı SSO Hesapları`,linkedAccountsDesc:`Bu harici kimlik sağlayıcıları hesabınıza bağlıdır.`,oidcUnlinked:`Hesap bağlantısı kaldırıldı.`},sessionPolicy:{title:`Oturum Politikası`,description:`Yeni kullanıcı girişleri için maksimum oturum süresi. Daha önce verilmiş belirteçler özgün son kullanma tarihlerini korur.`,preset24h:`24 saat`,preset7d:`7 gün`,preset30d:`30 gün`,customHoursLabel:`Özel oturum süresi (saat)`,hoursSuffix:`saat`,warning:`Daha uzun oturumlar otomatik oturum kapatma korumasını azaltır. Yalnızca güvenilir tek kullanıcılı dağıtımlar için önerilir.`},oidc:{title:`SSO / OIDC Sağlayıcıları`,desc:`Harici kimlik sağlayıcılar aracılığıyla tek oturum açmaya izin vermek için OpenID Connect sağlayıcılarını yapılandırın.`,addProvider:`Sağlayıcı Ekle`,newProvider:`Yeni Sağlayıcı`,empty:`Henüz yapılandırılmış OIDC sağlayıcısı yok.`,created:`Sağlayıcı oluşturuldu.`,updated:`Sağlayıcı güncellendi.`,deleted:`Sağlayıcı silindi.`,refreshIcon:`Simgeyi yenile`,removeIcon:`Simgeyi kaldır`,iconRefreshed:`Simge yenilendi.`,iconRemoved:`Simge kaldırıldı.`,iconFetchFailed:`Simge sağlayıcı URL'sinden alınamadı.`,deleteTitle:`Sağlayıcıyı Sil`,deleteMessage:`"{{name}}" silinsin mi? Tüm bağlı kullanıcı hesaplarının bağlantısı kaldırılacak.`,form:{name:`Görünen Ad`,issuerUrl:`Yayıncı URL`,clientId:`İstemci Kimliği`,clientSecret:`İstemci Gizli Anahtarı`,scopes:`Kapsamlar`,iconUrl:`Simge URL (isteğe bağlı)`,enabled:`Etkin`,autoCreate:`Kullanıcıları otomatik oluştur`,autoCreateDesc:`İlk girişte otomatik olarak yerel bir hesap oluştur.`,autoLink:`Mevcut hesapları otomatik bağla`,autoLinkDesc:`İlk girişte mevcut yerel hesapları e-posta eşleştirerek bağla.`,secretHint:`mevcut olanı korumak için boş bırakın`,secretPlaceholder:`yeni gizli anahtar`,emailClaim:`E-posta İddiası`,emailClaimDesc:`E-posta kimliği olarak kullanılan JWT iddiası. Azure Entra ID için 'preferred_username' veya 'upn' kullanın (email_verified göndermez). Yalnızca güvenilir iddia adlarını kullanın.`,emailClaimPlaceholder:`email`,emailClaimCustomClaimAutoLinkWarning:`Özel iddialar yalnızca değer kiracı tarafından yönetildiğinde otomatik bağlantı için güvenlidir (örn. Azure Entra ID upn / preferred_username). Kimlik sağlayıcınız kullanıcıların bu iddiayı kendi kendine onaylamasına izin veriyorsa otomatik bağlantıyı etkinleştirmeyin.`,requireEmailVerified:`E-posta doğrulamasını gerektir`,requireEmailVerifiedDesc:`E-posta iddiasını yalnızca sağlayıcı doğrulanmış olarak işaretlediğinde kabul et.`,requireEmailVerifiedWarning:`Uyarı: e-posta doğrulama olmadan bile kabul edilecek. Yalnızca güvenilir sağlayıcılarla kullanın.`,requireEmailVerifiedAutoLink:`Bu ayarı değiştirmek için önce otomatik bağlantıyı devre dışı bırakın.`,defaultGroup:`Varsayılan Grup`,defaultGroupDesc:`Otomatik oluşturulan kullanıcılara atanan grup. Ayarlanmazsa Viewers'a geri döner.`,defaultGroupViewersFallback:`Viewers (varsayılan)`}},encryption:{title:`MFA Şifreleme Durumu`,enabledFromEnv:`Sabit şifreleme etkin (anahtar MFA_ENCRYPTION_KEY ortam değişkeninden)`,enabledFromFile:`Sabit şifreleme etkin (anahtar veri dizininden yüklendi)`,enabledGenerated:`Sabit şifreleme otomatik oluşturulan anahtarla etkin`,notConfigured:`Sabit şifreleme yapılandırılmamış`,notConfiguredDesc:`TOTP gizli anahtarları ve OIDC client_secrets düz metin olarak saklanır. MFA_ENCRYPTION_KEY ayarlayın veya Bambuddy'yi otomatik olarak oluşturmak için yazılabilir bir veri dizini ile yeniden başlatın.`,allEncrypted:`Tüm MFA gizli anahtarları sabit olarak şifrelenmiş durumda.`,legacyRowsLabel:`Eski düz metin satırlar`,encryptedRowsLabel:`Şifrelenmiş satırlar`,legacyRowsWarning:`{{count}} eski düz metin satır algılandı. Şifrelenmiş depolamaya geçmek için OIDC sağlayıcısını yeniden kaydedin veya kullanıcının doğrulayıcı uygulamasını yeniden kaydedin.`,backupHint:`Otomatik oluşturulan anahtar DATA_DIR/.mfa_encryption_key konumunda saklanır ve yerel yedek ZIP'lere dahil edilir. Yedeklerinizi güvende tutun veya MFA_ENCRYPTION_KEY'i açıkça ayarlayın.`,decryptionBrokenTitle:`Şifreleme anahtarı eksik`,decryptionBrokenError:`Şifreleme anahtarı artık mevcut olmadığından {{count}} şifrelenmiş kayıt şifresi çözülemiyor. Kurtarmak için önceki MFA_ENCRYPTION_KEY veya DATA_DIR/.mfa_encryption_key'i geri yükleyin.`,migrationErrorWarning:`Başlangıçta {{count}} eski satır yeniden şifrelenemedi. Sunucu günlüklerini kontrol edin ve yeniden denemek için Bambuddy'yi yeniden başlatın.`}},notification:{printStarted:{title:`Baskı Başladı`,body:`{{printer}}: {{filename}} yazdırmaya başladı`},printCompleted:{title:`Baskı Tamamlandı`,body:`{{printer}}: {{filename}} başarıyla tamamlandı`},printFailed:{title:`Baskı Başarısız`,body:`{{printer}}: {{filename}} başarısız oldu`},printStopped:{title:`Baskı Durduruldu`,body:`{{printer}}: {{filename}} durduruldu`},printProgress:{title:`Baskı İlerlemesi`,body:`{{printer}}: {{filename}} %{{percent}} tamamlandı`},printerOffline:{title:`Yazıcı Çevrimdışı`,body:`{{printer}} çevrimdışı`},printerError:{title:`Yazıcı Hatası`,body:`{{printer}}: {{error}}`},filamentLow:{title:`Az Filament`,body:`{{printer}}: Filament azalıyor`},maintenanceDue:{title:`Bakım Zamanı`,body:`{{printer}}: {{items}} dikkat gerektiriyor`}},errors:{generic:`Bir şeyler ters gitti`,networkError:`Ağ hatası. Lütfen bağlantınızı kontrol edin.`,notFound:`Bulunamadı`,unauthorized:`Yetkisiz`,serverError:`Sunucu hatası`,validationError:`Lütfen girdinizi kontrol edin`,printerConnectionFailed:`Yazıcıya bağlanılamadı`,saveFailed:`Değişiklikler kaydedilemedi`,deleteFailed:`Silme başarısız`,loadFailed:`Veri yüklenemedi`},hmsErrors:{title:`Hatalar - {{name}}`,noErrors:`Hata yok`,viewOnWiki:`Bambu Lab Wiki'de görüntüle`,clearInstructions:`Buradan kapatmak için yazıcıdaki hataları temizleyin.`,clearErrors:`Hataları Temizle`,clearSuccess:`HMS hataları temizlendi`,clearFailed:`HMS hataları temizlenemedi`},mqttDebug:{title:`MQTT Hata Ayıklama Günlüğü`,searchPlaceholder:`Konu veya yük ara...`,noMessages:`Henüz mesaj kaydedilmedi`,startLoggingHint:`MQTT mesajlarını yakalamaya başlamak için "Kaydetmeye Başla"ya tıklayın`,noMessagesMatch:`Filtrenizle eşleşen mesaj yok`,adjustFilterHint:`Arama veya filtre kriterlerinizi ayarlamayı deneyin`,incoming:`Gelen`,outgoing:`Giden`,loggingStopped:`Kaydetme durduruldu`,loggingActive:`Kaydetme aktif - mesajlar otomatik olarak yenilenecek`,startLogging:`Kaydetmeye Başla`,stopLogging:`Kaydetmeyi Durdur`,clearLog:`Günlüğü Temizle`,topic:`Konu`,timestamp:`Zaman damgası`,direction:`Yön`,all:`Tümü`},printerFiles:{title:`Dosya Yöneticisi`,storageUsed:`Kullanılan:`,storageFree:`Boş:`,filterPlaceholder:`Dosyaları filtrele...`,deleteButton:`Sil`,deleteFiles:`{{count}} Dosya Sil`,deleteFileConfirm:`"{{name}}" silinsin mi? Bu geri alınamaz.`,deleteFilesConfirm:`Seçilen {{count}} dosya silinsin mi? Bu geri alınamaz.`,noFiles:`Yazıcıda dosya yok`,loadingFiles:`Dosyalar yükleniyor...`,failedToLoad:`Dosyalar yüklenemedi`,toast:{filesDeleted:`{{count}} dosya silindi`,deleteFailed:`Silme başarısız: {{error}}`}},confirm:{delete:`Bunu silmek istediğinizden emin misiniz?`,unsavedChanges:`Kaydedilmemiş değişiklikleriniz var. Çıkmak istediğinizden emin misiniz?`,clearQueue:`Kuyruğu temizlemek istediğinizden emin misiniz?`},login:{title:`Bambuddy Giriş`,subtitle:`Hesabınıza giriş yapın`,username:`Kullanıcı Adı`,usernamePlaceholder:`Kullanıcı adınızı girin`,usernameOrEmail:`Kullanıcı Adı veya E-posta`,usernameOrEmailPlaceholder:`Kullanıcı adı veya @ E-posta`,password:`Parola`,passwordPlaceholder:`Parolanızı girin`,signIn:`Giriş yap`,signingIn:`Giriş yapılıyor...`,rememberMe:`Beni Hatırla`,forgotPassword:`Parolanızı mı unuttunuz?`,loginSuccess:`Başarıyla giriş yapıldı`,loginFailed:`Giriş başarısız`,enterCredentials:`Lütfen kullanıcı adı ve parola girin`,enterEmail:`Lütfen e-posta adresinizi girin`,oidcLoginFailed:`OIDC girişi başarısız`,oidcErrors:{providerError:`Kimlik sağlayıcısı bir hata döndürdü`,missingParameters:`OIDC geri arama gerekli parametreleri eksik`,invalidState:`OIDC durumu geçersiz veya zaten kullanılmış`,stateExpired:`OIDC giriş oturumu süresi doldu — lütfen tekrar deneyin`,providerNotFound:`OIDC sağlayıcısı bulunamadı`,discoveryFailed:`OIDC keşif belgesi alınamadı`,invalidDiscovery:`OIDC keşif belgesi geçersiz`,networkError:`OIDC belirteç değişimi sırasında ağ hatası`,badResponse:`OIDC belirteç değişimi sırasında beklenmeyen yanıt`,noIdToken:`OIDC sağlayıcısı bir ID belirteci döndürmedi`,validationFailed:`OIDC belirteç doğrulaması başarısız`,nonceMismatch:`OIDC nonce uyuşmazlığı — olası tekrar saldırısı`,missingSubClaim:`OIDC belirteci sub iddiasını içermiyor`,noLinkedAccount:`Bu OIDC kimliğine bağlı yerel hesap yok`,accountInactive:`Hesabınız aktif değil`,userResolutionFailed:`Hesabınız çözümlenemedi`,internalError:`OIDC girişi sırasında dahili bir hata oluştu`,tokenExchangeFailed:`OIDC belirteç değişimi başarısız`},forgotPasswordTitle:`Parolayı Unuttum`,forgotPasswordMessage:`Parolanızı unuttuysanız, sıfırlamak için lütfen sistem yöneticinizle iletişime geçin.`,forgotPasswordEmailMessage:`E-posta adresinizi girin, size yeni bir parola göndereceğiz.`,emailAddress:`E-posta Adresi`,emailPlaceholder:`eposta.adresi@example.com`,cancel:`İptal`,sending:`Gönderiliyor...`,sendResetEmail:`Sıfırlama E-postası Gönder`,howToReset:`Parolanızı nasıl sıfırlarsınız:`,resetStep1:`Bambuddy yöneticinizle iletişime geçin`,resetStep2:`Kullanıcı Yönetiminde parolanızı sıfırlamasını isteyin`,resetStep3:`Sizin için yeni bir geçici parola belirleyebilirler`,resetStep4:`Yeni parolayla giriş yapın ve Ayarlarda değiştirin`,gotIt:`Anladım`,resetPassword:{title:`Yeni Parola Belirle`,subtitle:`Aşağıya yeni parolanızı girin ve onaylayın.`,newPassword:`Yeni Parola`,newPasswordPlaceholder:`En az 8 karakter`,confirmPassword:`Parolayı Onayla`,confirmPasswordPlaceholder:`Yeni parolayı tekrarlayın`,saving:`Kaydediliyor…`,submit:`Yeni Parola Belirle`,backToLogin:`Girişe dön`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 8 karakter olmalı`,resetFailed:`Parola sıfırlama başarısız. Bağlantının süresi dolmuş olabilir.`},twoFA:{title:`İki Faktörlü Kimlik Doğrulama`,subtitle:`Hesabınız 2FA ile korunuyor. Aşağıya doğrulama kodunu girin.`,methodAuthenticator:`Doğrulayıcı Uygulama`,methodEmail:`E-posta Kodu`,methodBackup:`Yedek Kod`,instructionsTotp:`Doğrulayıcı uygulamanızı açın ve Bambuddy için 6 haneli kodu girin.`,instructionsEmail:`E-posta adresinize 6 haneli bir kod gönderildi. 10 dakika içinde sona erer.`,instructionsEmailNotSent:`E-posta yoluyla bir doğrulama kodu almak için aşağıdaki düğmeye tıklayın.`,instructionsBackup:`8 karakterlik yedek kurtarma kodlarınızdan birini girin. Her kod yalnızca bir kez kullanılabilir.`,sendCodeButton:`E-posta ile Kod Gönder`,sendingCode:`Gönderiliyor...`,resendCode:`Kodu yeniden gönder`,codeLabel:`Doğrulama Kodu`,backupCodeLabel:`Yedek Kod`,codePlaceholder:`000000`,backupCodePlaceholder:`XXXXXXXX`,verifyButton:`Doğrula`,verifyingButton:`Doğrulanıyor...`,backToLogin:`← Girişe dön`,orContinueWith:`veya şununla devam edin`,signInWith:`{{provider}} ile giriş yap`,enterCode:`Lütfen doğrulama kodunu girin`,sendCodeFailed:`Doğrulama kodu gönderilemedi`,invalidCode:`Geçersiz kod. Lütfen tekrar deneyin.`}},setup:{title:`Bambuddy Kurulumu`,subtitle:`Bambuddy örneğiniz için kimlik doğrulamayı yapılandırın`,enableAuth:`Kimlik Doğrulamayı Etkinleştir`,adminAccount:`Yönetici Hesabı`,adminAccountDesc:`Yönetici kullanıcılar zaten varsa, kimlik doğrulama mevcut yönetici hesapları kullanılarak etkinleştirilecek. Mevcut yöneticileri kullanmak için aşağıdaki alanları boş bırakın veya yeni bir yönetici kullanıcı oluşturmak için yeni kimlik bilgileri girin.`,adminUsername:`Yönetici Kullanıcı Adı`,adminPassword:`Yönetici Parolası`,optionalIfAdminExists:`(yönetici kullanıcılar varsa isteğe bağlı)`,adminUsernamePlaceholder:`Yönetici kullanıcı adı girin (isteğe bağlı)`,adminPasswordPlaceholder:`Yönetici parolası girin (isteğe bağlı)`,confirmPassword:`Parolayı Onayla`,confirmPasswordPlaceholder:`Yönetici parolasını onayla`,settingUp:`Kuruluyor...`,completeSetup:`Kurulumu Tamamla`,toast:{authEnabledAdminCreated:`Kimlik doğrulama etkinleştirildi ve yönetici kullanıcı oluşturuldu`,authEnabledExistingAdmins:`Mevcut yönetici kullanıcılar kullanılarak kimlik doğrulama etkinleştirildi`,setupCompleted:`Kurulum tamamlandı`,enterBothCredentials:`Lütfen hem yönetici kullanıcı adı hem de parola girin veya mevcut yönetici kullanıcıları kullanmak için her ikisini de boş bırakın`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 6 karakter olmalı`}},changePassword:{title:`Parolayı Değiştir`,currentPassword:`Mevcut Parola`,currentPasswordPlaceholder:`Mevcut parolayı girin`,newPassword:`Yeni Parola`,newPasswordPlaceholder:`Yeni parolayı girin (en az 6 karakter)`,confirmPassword:`Yeni Parolayı Onayla`,confirmPasswordPlaceholder:`Yeni parolayı onayla`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 6 karakter olmalı`,changing:`Değiştiriliyor...`,success:`Parola başarıyla değiştirildi`,failed:`Parola değiştirilemedi`},plateAlert:{title:`Baskı Duraklatıldı!`,message:`Baskı plakasında nesneler algılandı. Baskı otomatik olarak duraklatıldı. Lütfen plakayı temizleyin ve baskıya devam edin.`,understand:`Anladım`},camera:{title:`Kamera Görünümü`,invalidPrinterId:`Geçersiz yazıcı ID'si`,live:`Canlı`,snapshot:`Anlık Görüntü`,restartStream:`Akışı yeniden başlat`,refreshSnapshot:`Anlık görüntüyü yenile`,fullscreen:`Tam ekran`,exitFullscreen:`Tam ekrandan çık`,connectingToCamera:`Kameraya bağlanılıyor...`,capturingSnapshot:`Anlık görüntü yakalanıyor...`,connectionLost:`Bağlantı kesildi`,connectionFailed:`Kamera bağlantısı başarısız`,reconnecting:`{{countdown}}sn içinde yeniden bağlanılıyor... (deneme {{attempt}}/{{max}})`,reconnectNow:`Şimdi yeniden bağlan`,cameraUnavailable:`Kamera kullanılamıyor`,cameraUnavailableDesc:`Yazıcının açık ve bağlı olduğundan emin olun.`,noCamera:`Kamera yok`,retry:`Yeniden dene`,cameraStream:`Kamera akışı`,zoomOut:`Uzaklaştır`,zoomIn:`Yakınlaştır`,resetZoom:`Yakınlaştırmayı sıfırla`,recording:`Kaydediyor`,startRecording:`Kaydı Başlat`,stopRecording:`Kaydı Durdur`,chamberLight:`Hazne ışığını aç/kapat`,unavailable:`Kamera kullanılamıyor`,diagnose:{button:`Tanıla`,modalTitle:`Kamera tanılaması`,running:`Tanılama çalışıyor...`,runFailed:`Tanılama çalıştırılamadı: {{error}}`,retry:`Tekrar çalıştır`,stage:{tcp_reachable:`Ağ erişilebilirliği`,first_frame:`Kare yakalama`,live_stream_active:`Canlı akış aktif`},summary:{all_ok:`Kamera çalışıyor. Tanılama tüm aşamaları başarıyla tamamladı.`,live_stream_active_healthy:`Kamera şu anda son karelerle akış yapıyor — teste gerek yok.`,printer_unreachable:`Yazıcıya erişilemiyor. IP adresini, ağ bağlantısını ve yazıcının açık olduğunu kontrol edin.`,camera_port_closed:`Yazıcıya erişilebilir ancak kamera portu kapalı. Yazıcı ayarlarında yalnızca LAN modunun ve Geliştirici Modunun etkin olduğundan emin olun.`,no_frame:`Kameraya bağlanıldı ancak hiç kare alınmadı. Tekrar deneyin veya yazıcı ayarlarında kameranın etkin olduğunu kontrol edin.`,unknown_failure:`Kamera tanılaması bilinmeyen bir nedenle başarısız oldu. Ayrıntılar için destek günlüğüne bakın.`},meta:{protocol:`Protokol`,port:`Port`,profile:`Profil`}}},groups:{title:`Grup Yönetimi`,subtitle:`Erişim kontrolü için izin gruplarını yönetin`,backToSettings:`Ayarlara Dön`,createGroup:`Grup Oluştur`,noPermission:`Bu sayfaya erişim izniniz yok.`,system:`Sistem`,noDescription:`Açıklama yok`,usersCount:`{{count}} kullanıcı`,permissionsCount:`{{count}} izin`,edit:`Düzenle`,delete:`Sil`,toast:{created:`Grup başarıyla oluşturuldu`,updated:`Grup başarıyla güncellendi`,deleted:`Grup başarıyla silindi`,enterGroupName:`Lütfen bir grup adı girin`},modal:{editGroup:`Grubu Düzenle`,createGroup:`Grup Oluştur`,cancel:`İptal`,saving:`Kaydediliyor...`,creating:`Oluşturuluyor...`,saveChanges:`Değişiklikleri Kaydet`},form:{groupName:`Grup Adı`,groupNamePlaceholder:`Grup adını girin`,systemGroupWarning:`Sistem grubu adları değiştirilemez`,description:`Açıklama`,descriptionPlaceholder:`Açıklama girin (isteğe bağlı)`,permissions:`İzinler ({{count}} seçildi)`},deleteModal:{title:`Grubu Sil`,message:`Bu grubu silmek istediğinizden emin misiniz? Bu gruptaki kullanıcılar bu izinleri kaybedecek.`,confirm:`Grubu Sil`},editor:{title:`Grubu Düzenle`,createTitle:`Grup Oluştur`,search:`İzinlerde ara...`,selectAll:`Tümünü Seç`,clearAll:`Tümünü Temizle`,permissionsSelected:`{{count}} seçildi`,noResults:`Aramanızla eşleşen izin yok`}},users:{title:`Kullanıcı Yönetimi`,subtitle:`Kullanıcıları ve Bambuddy örneğinize erişimlerini yönetin`,backToSettings:`Ayarlara Dön`,createUser:`Kullanıcı Oluştur`,noPermission:`Bu sayfaya erişim izniniz yok.`,admin:`Yönetici`,noGroups:`Grup yok`,active:`Aktif`,inactive:`Pasif`,edit:`Düzenle`,delete:`Sil`,system:`Sistem`,noGroupsAvailable:`Kullanılabilir grup yok`,table:{username:`Kullanıcı Adı`,groups:`Gruplar`,status:`Durum`,actions:`İşlemler`},toast:{created:`Kullanıcı başarıyla oluşturuldu`,updated:`Kullanıcı başarıyla güncellendi`,deleted:`Kullanıcı başarıyla silindi`,fillRequired:`Lütfen tüm zorunlu alanları doldurun`,passwordsDoNotMatch:`Parolalar eşleşmiyor`,passwordTooShort:`Parola en az 6 karakter olmalı`,ldapProvisioned:`"{{username}}" LDAP kullanıcısı tedarik edildi`},modal:{createUser:`Kullanıcı Oluştur`,editUser:`Kullanıcıyı Düzenle`,cancel:`İptal`,creating:`Oluşturuluyor...`,saving:`Kaydediliyor...`,saveChanges:`Değişiklikleri Kaydet`,advancedAuthSubtitle:`Gelişmiş Kimlik Doğrulama ile`,tabsAriaLabel:`Kullanıcı kaynağı`,localTab:`Yerel`,ldapTab:`LDAP`,ldapSearchLabel:`Dizinde ara`,ldapSearchPlaceholder:`Bir kullanıcı adı, isim veya e-posta yazın...`,ldapMinChars:`Aramak için en az 2 karakter yazın`,ldapTypeToSearch:`LDAP dizininde aramak için yazmaya başlayın`,ldapSearching:`Dizinde aranıyor...`,ldapNoResults:`Dizinde eşleşen kullanıcı yok`,ldapSearchError:`Dizin araması başarısız. LDAP sunucu durumunu kontrol edin.`,ldapAlreadyProvisioned:`Zaten tedarik edildi`,ldapSelectedLabel:`Seçildi`,ldapProvision:`Kullanıcıyı tedarik et`,ldapProvisioning:`Tedarik ediliyor...`,ldapErrorProvision:`Tedarik başarısız. LDAP sunucu durumunu kontrol edin ve tekrar deneyin.`},form:{username:`Kullanıcı Adı`,usernamePlaceholder:`Kullanıcı adını girin`,email:`E-posta`,emailPlaceholder:`kullanici@example.com`,password:`Parola`,passwordPlaceholder:`Parolayı girin`,confirmPassword:`Parolayı Onayla`,confirmPasswordPlaceholder:`Parolayı onayla`,newPasswordPlaceholder:`Yeni parolayı girin`,confirmNewPasswordPlaceholder:`Yeni parolayı onayla`,leaveBlankToKeep:`mevcut olanı korumak için boş bırakın`,groups:`Gruplar`,optional:`isteğe bağlı`,autoGeneratedPassword:`Güvenli bir parola otomatik olarak oluşturulacak ve kullanıcıya e-posta ile gönderilecek.`,passwordManagedByAdvancedAuth:`Parola Gelişmiş Kimlik Doğrulama tarafından yönetilir. Kullanıcıya e-posta yoluyla yeni bir parola göndermek için "Parolayı Sıfırla"yı kullanın.`,resetPassword:`Parolayı Sıfırla`,resettingPassword:`Parola Sıfırlanıyor...`},deleteModal:{title:`Kullanıcıyı Sil`,message:`Bu kullanıcıyı silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.`,confirm:`Kullanıcıyı Sil`}},streamOverlay:{title:`Akış Bindirmesi`,invalidPrinterId:`Geçersiz yazıcı ID'si`,cameraStream:`Kamera akışı`,progress:`İlerleme`,eta:`ETA`,printerIdle:`Yazıcı boşta`,printerOffline:`Yazıcı çevrimdışı`,status:{printing:`Yazdırılıyor`,paused:`Duraklatıldı`,finished:`Tamamlandı`,failed:`Başarısız`,idle:`Boşta`,unknown:`Bilinmiyor`}},profiles:{title:`Profiller`,subtitle:`Dilimleyici ön ayarlarını ve basınç ilerleme kalibrasyonlarını yönetin`,tabs:{bambuCloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,local:`Yerel Profiller`,kprofiles:`K-Profilleri`},orcaCloud:{connectedAs:`Bağlı kullanıcı`,logout:`Bağlantıyı kes`,noLogoutPermission:`Bağlantıyı kesme izniniz yok`,noConnectPermission:`Orca Cloud'a bağlanma izniniz yok`,retry:`Yeniden dene`,back:`Farklı bir giriş yöntemi kullan`,connect:{title:`Orca Cloud'a bağlan`,description:`Dilimleyici profillerinizi Bambuddy ile senkronize etmek için Orca Cloud hesabınıza giriş yapın.`},providers:{google:`Google ile giriş yap`,apple:`Apple ile giriş yap`,github:`GitHub ile giriş yap`,email:`E-posta ve şifre ile giriş yap`},password:{title:`E-posta ve şifre ile giriş yap`,email:`E-posta`,emailPlaceholder:`sen@ornek.com`,password:`Şifre`,submit:`Giriş yap`},paste:{title:`Girişi tamamla`,step1:`Yeni bir sekme Orca Cloud giriş sayfasıyla açıldı. Orca hesabınızla giriş yapın.`,step2:`Tarayıcınız yüklenemeyen bir "localhost" URL'sine yönlendirilecektir. Bu beklenen bir durumdur — bize gereken URL budur.`,step3:`Tarayıcınızın adres çubuğundaki URL'nin tamamını kopyalayın ve aşağıya yapıştırın.`,signInUrl:`Giriş sekmesi açılmadıysa bu URL'ye tıklayın:`,label:`Geri çağrı URL'sini buraya yapıştırın`,placeholder:`http://localhost:41172/callback?code=...&state=...`,submit:`Bağlantıyı tamamla`},profiles:{title:`Orca Cloud profilleriniz ({{count}})`,refresh:`Yenile`,empty:`Orca Cloud hesabınızda henüz profil bulunamadı.`},toast:{connected:`{{email}} olarak Orca Cloud'a bağlanıldı`,disconnected:`Orca Cloud bağlantısı kesildi`},errors:{startFailed:`Orca Cloud giriş akışı başlatılamadı.`,finishFailed:`Orca Cloud girişi tamamlanamadı.`,passwordFailed:`Bu e-posta ve şifreyle giriş yapılamadı.`,passwordEmpty:`Lütfen hem e-postanızı hem de şifrenizi girin.`,emptyPaste:`Lütfen tarayıcınızdan geri çağrı URL'sini yapıştırın.`,noCode:`Bu URL bir Orca Cloud geri çağrısına benzemiyor (code parametresi yok). Tam URL'yi adres çubuğundan kopyalayın.`}},localProfiles:{title:`Yerel Profiller`,subtitle:`OrcaSlicer'dan dilimleyici ön ayarlarını içe aktar ve yönet`,import:`Profilleri İçe Aktar`,importDesc:`.bbscfg, .bbsflmt, .orca_filament, .zip veya .json dosyalarını buraya bırakın`,importing:`İçe aktarılıyor...`,search:`Yerel ön ayarlarda ara...`,noPresets:`Henüz yerel ön ayar yok`,noSearchResults:`Aramanızla eşleşen ön ayar yok`,badge:`Yerel`,edit:`Düzenle`,delete:`Sil`,cancel:`İptal`,deleteConfirmTitle:`Ön Ayarı Sil`,deleteConfirm:`Bu ön ayarı silmek istediğinizden emin misiniz? Bu geri alınamaz.`,source:`Kaynak`,inheritsFrom:`Miras alır`,filamentType:`Tür`,vendor:`Satıcı`,compatiblePrinters:`Yazıcılar`,nozzleTemp:`Nozul Sıcaklığı`,cost:`Maliyet`,density:`Yoğunluk`,pressureAdvance:`Basınç İlerlemesi`,filament:`Filament`,process:`İşlem`,printer:`Yazıcı`,toast:{importSuccess:`{{count}} ön ayar içe aktarıldı`,importSkipped:`{{count}} ön ayar atlandı (yinelenenler)`,importError:`İçe aktarma sırasında {{count}} hata`,deleted:`Ön ayar silindi`,updated:`Ön ayar güncellendi`}},connectedAs:`Bağlı kullanıcı`,logout:`Çıkış`,noLogoutPermission:`Çıkış yapma izniniz yok`,failedToLoad:`Profiller yüklenemedi`,retry:`Yeniden dene`,time:{justNow:`Az önce`,minsAgo:`{{count}}dk önce`,hoursAgo:`{{count}}sa önce`,daysAgo:`{{count}}g önce`},toast:{loggedOut:`Çıkış yapıldı`},login:{title:`Bambu Cloud'a Bağlan`,subtitle:`Dilimleyici ön ayarlarınızı cihazlar arasında senkronize edin`,email:`E-posta`,password:`Parola`,region:`Bölge`,regionGlobal:`Global`,regionChina:`Çin`,verificationCode:`Doğrulama Kodu`,totpCode:`Doğrulayıcı Kodu`,checkEmail:`E-postanızı ({{email}}) 6 haneli kod için kontrol edin`,enterTotpHint:`Doğrulayıcı uygulamanızdan 6 haneli kodu girin`,accessToken:`Erişim Belirteci`,accessTokenHint:`Bambu Cloud erişim belirtecinizi yapıştırın. Çin bölgesi hesapları bu yolu kullanmalıdır (telefon bağımlı — e-posta girişi kullanılamaz). MakerWorld çerezlerinden belirteci nasıl alacağınız için wiki'ye bakın.`,back:`Geri`,loginButton:`Giriş`,verifyButton:`Doğrula`,setTokenButton:`Belirteç Ayarla`,useToken:`Erişim belirteci kullan`,useEmail:`E-posta ile giriş yap`,toast:{loggedIn:`Başarıyla giriş yapıldı`,codeSent:`Doğrulama kodu e-postanıza gönderildi`,enterTotp:`Doğrulayıcı uygulamanızdan kod girin`,tokenSet:`Belirteç başarıyla ayarlandı`}},presets:{myPreset:`Ön ayarım (düzenlenebilir)`,duplicate:`Çoğalt`,editable:`Düzenlenebilir`,failedToLoadDetails:`Ön ayar ayrıntıları yüklenemedi`,deleteConfirm:`Bu ön ayar silinsin mi?`,deleteWarning:`Bu, "{{name}}" ön ayarını Bambu Cloud'dan kalıcı olarak silecek. Bu geri alınamaz.`,noDuplicatePermission:`Ön ayarları çoğaltma izniniz yok`,noEditPermission:`Ön ayarları düzenleme izniniz yok`,noDeletePermission:`Ön ayarları silme izniniz yok`,types:{filament:`Filament ön ayarı`,printer:`Yazıcı ön ayarı`,process:`İşlem ön ayarı`},toast:{deleted:`Ön ayar silindi`,created:`Ön ayar oluşturuldu`,updated:`Ön ayar güncellendi`,duplicated:`Ön ayar çoğaltıldı`,fieldAdded:`"{{key}}" alanı eklendi`,exported:`Ön ayar dışa aktarıldı`},baseLabel:`Taban: {{name}}`,currentLabel:`Mevcut: {{name}}`,newPreset:`Yeni Ön Ayar`,editPreset:`Ön Ayarı Düzenle`,duplicatePreset:`Ön Ayarı Çoğalt`,createNewPreset:`Yeni Ön Ayar Oluştur`,customizeSettings:`Yeni ön ayarınız için ayarları özelleştirin`,compareWithBase:`Taban ön ayarla karşılaştır`,compare:`Karşılaştır`,basePreset:`Taban Ön Ayar`,selectBasePreset:`Taban ön ayar seç...`,presetName:`Ön Ayar Adı`,myCustomPreset:`Özel ön ayarım`,inheritsFrom:`Miras alır`,dropJsonToImport:`İçe aktarmak için JSON bırakın`,tabs:{common:`Ortak`,allFields:`Tüm Alanlar`},availableFields:`Kullanılabilir Alanlar`,searchFieldsPlaceholder:`Alanlarda ara...`,noMatchingFields:`Eşleşen alan yok`,allFieldsAdded:`Tüm alanlar eklendi`,addCustomField:`Özel alan ekle`,yourOverrides:`Geçersiz Kılmalarınız`,noOverridesYet:`Henüz geçersiz kılma yok`,clickFieldsToAdd:`Eklemek için soldaki alanlara tıklayın`,saveAsTemplate:`Şablon olarak kaydet`,jsonTip:`İpucu: Ayarları içe aktarmak için bu modalin herhangi bir yerine .json dosyasını sürükleyip bırakın`},cloudView:{searchPlaceholder:`Ön ayarlarda ara...`,templates:`Şablonlar`,refresh:`Yenile`,newPreset:`Yeni Ön Ayar`,clearFilters:`Filtreleri temizle`,compareMode:`Karşılaştırma Modu`,selectAnotherPreset:`Başka bir {{type}} ön ayarı seç`,clickTwoPresets:`Karşılaştırmak için aynı türden iki ön ayara tıklayın`,selectFirst:`1. İlkini seç`,selectSecond:`2. İkincisini seç`,compareNow:`Şimdi Karşılaştır`,lastSynced:`Son senkronizasyon:`,showingCount:`{{total}} ön ayardan {{showing}} tanesi gösteriliyor`,noPresetsFound:`Ön ayar bulunamadı`,columns:{filament:`Filament`,process:`İşlem`,printer:`Yazıcı`},noFilamentPresets:`Filament ön ayarı yok`,noProcessPresets:`İşlem ön ayarı yok`,noPrinterPresets:`Yazıcı ön ayarı yok`,filters:{type:`Tür`,owner:`Sahip`,printer:`Yazıcı`,nozzle:`Nozul`,filament:`Filament`,layer:`Katman`,all:`Tümü`,myPresets:`Ön Ayarlarım`,builtIn:`Yerleşik`,process:`İşlem`},noTemplatesPermission:`Şablonları yönetme izniniz yok`,noRefreshPermission:`Profilleri yenileme izniniz yok`,noCreatePermission:`Ön ayar oluşturma izniniz yok`},templates:{title:`Hızlı Şablonlar`,noTemplates:`Henüz şablon yok`,createFirst:`Ön ayar düzenleyicisinden şablonlar oluşturun`,typeFilter:`Tür:`,deleteTitle:`Şablonu Sil`,deleteWarning:`Bu işlem geri alınamaz`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,namePlaceholder:`Şablon adı`,descriptionPlaceholder:`Açıklama`,settingsJson:`Ayarlar (JSON)`,fieldsCount:`{{count}} alan`,shownInModals:`Modallerde gösterilir`,hiddenInModals:`Modallerde gizli`,apply:`Uygula`,toast:{deleted:`Şablon silindi`,updated:`Şablon güncellendi`,created:`Şablon oluşturuldu`,applied:`Şablon uygulandı`}}},support:{debugLoggingActive:`Hata ayıklama kaydı aktif`,manageLogs:`Yönet`,collectItem7:`Yazıcı bağlantısı ve firmware sürümleri`,collectItem8:`Entegrasyon durumu (Spoolman, MQTT, HA)`,collectItem9:`Ağ arayüzleri (yalnızca alt ağlar)`,collectItem10:`Python paket sürümleri`,collectItem11:`Veritabanı sağlık kontrolleri`,collectItem12:`Docker ortam ayrıntıları`,bundleGenerating:`Paket oluşturuluyor...`,bundleStepConnection:`Yazıcı bağlantı kontrolleri çalıştırılıyor`,bundleStepVirtualPrinters:`Sanal yazıcı kurulum kontrolleri çalıştırılıyor`,bundleStepLogScan:`Son günlüklerde bilinen sorunlar taranıyor`,bundleStepBuild:`Destek paketi ZIP oluşturuluyor`},fileManager:{title:`Dosya Yöneticisi`,subtitle:`Baskı dosyalarınızı organize edin ve yönetin`,uploadFiles:`Dosya Yükle`,newFolder:`Yeni Klasör`,folderName:`Klasör Adı`,folderNamePlaceholder:`örn., Fonksiyonel Parçalar`,renameFile:`Dosyayı Yeniden Adlandır`,renameFolder:`Klasörü Yeniden Adlandır`,invalidFilenameChar:`Baskı dosya adlarında "{{char}}" karakterine izin verilmiyor. Yazıcının SD kartı şu karakterleri reddeder: < > : " / \\ | ? *`,moveFiles:`{{count}} Dosyayı Taşı`,rootNoFolder:`Kök (Klasör Yok)`,current:`mevcut`,linkFolder:`Klasörü Bağla`,linkFolderDescription:`Hızlı erişim için "{{name}}" klasörünü bir projeye veya arşive bağla.`,project:`Proje`,archive:`Arşiv`,noProjectsFound:`Proje bulunamadı`,noArchivesFound:`Arşiv bulunamadı`,unlink:`Bağlantıyı Kaldır`,link:`Bağla`,dragDropFiles:`Dosyaları buraya sürükleyip bırakın`,dropFilesHere:`Dosyaları buraya bırakın`,releaseToUpload:`Yüklemek için bırakın`,orClickToBrowse:`veya göz atmak için tıklayın`,allFileTypesSupported:`Tüm dosya türleri desteklenir. ZIP dosyaları çıkarılacak.`,zipFilesDetected:`ZIP dosyaları algılandı`,zipExtractOptions:`ZIP dosyaları çıkarılacak. Klasör yapısını nasıl yöneteceğinizi seçin:`,preserveZipStructure:`ZIP'ten klasör yapısını koru`,createFolderFromZip:`ZIP dosya adından klasör oluştur`,stlThumbnailGeneration:`STL küçük resim oluşturma`,zipMayContainStl:`ZIP dosyaları STL dosyaları içerebilir. Küçük resimler çıkarma sırasında oluşturulabilir.`,thumbnailsCanBeGenerated:`STL dosyaları için küçük resimler oluşturulabilir. Büyük modellerin işlenmesi daha uzun sürebilir.`,generateThumbnailsForStl:`STL dosyaları için küçük resim oluştur`,threemfDetected:`3MF dosyaları algılandı`,threemfExtractionInfo:`Yazıcı modeli, malzeme, renk ve baskı ayarları 3MF dosyalarından otomatik olarak çıkarılacak.`,willBeExtracted:`Çıkarılacak`,filesExtracted:`{{count}} dosya çıkarıldı`,uploadComplete:`Yükleme tamamlandı: {{succeeded}} başarılı`,uploadFailed:`Yükleme başarısız`,zipFilesFailed:`{{count}} dosya başarısız`,uploading:`Yükleniyor...`,changeLink:`Bağlantıyı Değiştir...`,linkTo:`Şuna bağla...`,linkToProjectOrArchive:`Projeye veya arşive bağla`,addToQueue:`Kuyruğa Ekle`,schedulePrint:`Zamanla`,generateThumbnail:`Küçük Resim Oluştur`,generateThumbnails:`Küçük Resimler Oluştur`,generateThumbnailsForMissing:`Eksik olan STL dosyaları için küçük resimler oluştur`,gridView:`Izgara görünümü`,listView:`Liste görünümü`,lowDiskSpaceWarning:`Düşük disk alanı uyarısı`,lowDiskSpaceDetails:`Toplam {{total}} alandan yalnızca {{free}} boş. Eşik ayarlarda {{threshold}} GB olarak ayarlanmış.`,files:`Dosyalar`,folders:`Klasörler`,size:`Boyut`,free:`Boş`,allFiles:`Tüm Dosyalar`,allExternal:`Harici`,externalIsEmpty:`Harici dosya yok`,externalEmptyDescription:`Bağlı harici klasörlerinizdeki dosyalar burada görünecek.`,wrap:`Sar`,enableTextWrapping:`Metin sarmayı etkinleştir`,disableTextWrapping:`Metin sarmayı devre dışı bırak`,collapse:`Daralt`,collapseFoldersByDefault:`Klasörleri varsayılan olarak daralt`,expandFoldersByDefault:`Klasörleri varsayılan olarak genişlet`,folderSort:`Klasörleri sırala`,folderSortByName:`Ada göre`,folderSortByActivity:`Son etkinliğe göre`,dragToResizeTooltip:`Yeniden boyutlandırmak için sürükleyin, sıfırlamak için çift tıklayın`,searchFiles:`Dosyalarda ara...`,searchSubfoldersHint:`Alt klasörler dahil`,readme:{truncated:`Kısaltıldı`},tags:{title:`Etiketler`,subtitle:`Çapraz filtreleme için dosyaları etiketleyin — oyuncak, çocuklar için güvenli, sadece PETG, ne isterseniz.`,manage:`Etiketler`,manageTitle:`Etiket kataloğunu yönet`,add:`Yeni etiket`,edit:`Etiketi yeniden adlandır`,name:`Ad`,fileCount:`Dosya`,empty:`Henüz etiket yok. Bir tane oluşturup dosyaları etiketlemeye başlayın.`,noMatches:`Eşleşen etiket yok.`,createPlaceholder:`örn. oyuncak, çocuk-güvenli, petg`,createButton:`Oluştur`,nameRequired:`Ad gerekli.`,searchPlaceholder:`Etiketleri filtrele...`,created:`Etiket oluşturuldu.`,updated:`Etiket yeniden adlandırıldı.`,deleted:`Etiket kaldırıldı.`,saveFailed:`Etiket kaydedilemedi.`,deleteFailed:`Etiket kaldırılamadı.`,applyFailed:`Etiketler uygulanamadı.`,applyAdd:`Etiket ekle`,applyRemove:`Etiket kaldır`,applyAddSuccess:`{{files}} dosyaya {{count}} etiket eklendi.`,applyRemoveSuccess:`{{files}} dosyadan {{count}} etiket kaldırıldı.`,actionAdd:`Seçili dosyalara ekle`,actionRemove:`Seçili dosyalardan kaldır`,tagAction:`Etiketle`,bulkTitle:`Seçili {{count}} dosyayı etiketle`,bulkTooltip:`Seçili her dosyaya etiket ekleyin veya kaldırın.`,noPermission:`Dosyaları etiketleme izniniz yok.`,filterLabel:`Filtre:`,clearAll:`Tümünü temizle`,confirmDelete:`"{{name}}" etiketi silinsin mi?`,confirmDeleteMessage:`Bu, etiketi katalogdan kaldırır. Dosyalar diğer etiketlerini korur.`,confirmDeleteInUseMessage:`Bu etiket {{count}} dosyada bulunuyor. Silmek hepsinden çıkarır; dosyaların kendisine dokunulmaz.`,editAria:`{{name}} düzenle`,deleteAria:`{{name}} sil`},allTypes:`Tüm türler`,prints:`Baskılar`,ascending:`Artan`,descending:`Azalan`,resultsCount:`{{total}} dosyadan {{showing}} tanesi`,selectAll:`Tümünü Seç`,deselectAll:`Seçimi Kaldır`,selected:`{{count}} seçildi`,adding:`Ekleniyor...`,loadingFiles:`Dosyalar yükleniyor...`,folderIsEmpty:`Klasör boş`,noFilesYet:`Henüz dosya yok`,folderEmptyDescription:`Başlamak için bu klasöre dosya yükleyin veya dosyaları taşıyın.`,noFilesDescription:`Baskıyla ilgili dosyalarınızı organize etmeye başlamak için dosya yükleyin.`,noMatchingFiles:`Eşleşen dosya yok`,noMatchingFilesDescription:`Mevcut arama veya filtre kriterlerinizle eşleşen dosya yok.`,clearFilters:`Filtreleri temizle`,printedCount:`{{count}}x yazdırıldı`,uploadedBy:`Yükleyen`,deleteFolder:`Klasörü Sil`,deleteFile:`Dosyayı Sil`,deleteFilesCount:`{{count}} Dosya Sil`,deleteFolderConfirm:`Bu klasörü silmek istediğinizden emin misiniz? İçindeki tüm dosyalar da silinecek.`,deleteFileConfirm:`Bu dosyayı silmek istediğinizden emin misiniz?`,deleteFilesConfirm:`{{count}} seçili dosyayı silmek istediğinizden emin misiniz? Bu işlem geri alınamaz.`,deleting:`Siliniyor...`,noPermissionRenameFolder:`Klasörleri yeniden adlandırma izniniz yok`,noPermissionLinkFolder:`Klasörleri bağlama izniniz yok`,noPermissionDeleteFolder:`Klasörleri silme izniniz yok`,noPermissionPrint:`Yazdırma izniniz yok`,noPermissionAddToQueue:`Kuyruğa ekleme izniniz yok`,noPermissionSlice:`Dosyaları dilimleme izniniz yok`,noPermissionDownload:`Dosyaları indirme izniniz yok`,noPermissionRenameFile:`Bu dosyayı yeniden adlandırma izniniz yok`,noPermissionGenerateThumbnail:`Küçük resim oluşturma izniniz yok`,noPermissionDeleteFile:`Bu dosyayı silme izniniz yok`,noPermissionCreateFolder:`Klasör oluşturma izniniz yok`,noPermissionUpload:`Dosya yükleme izniniz yok`,noPermissionMoveFiles:`Dosyaları taşıma izniniz yok`,noPermissionDeleteFiles:`Dosyaları silme izniniz yok`,linkExternal:`Harici Bağla`,linkExternalFolder:`Harici Klasör Bağla`,linkExternalFolderDescription:`Bir ana bilgisayar dizinini (NAS, USB, ağ paylaşımı) Dosya Yöneticisine bağla. Dosyalar kopyalanmaz — orijinal yoldan doğrudan erişilir.`,externalFolderNamePlaceholder:`örn., NAS Baskıları`,externalPath:`Ana Bilgisayar Yolu`,externalPathHelp:`Docker ana bilgisayarındaki dizinin mutlak yolu. Konteynere bind-mount edilmiş olmalıdır.`,readOnly:`Salt Okunur`,readOnlyHelp:`yüklemeleri ve silmeleri engeller`,showHiddenFiles:`Gizli dosyaları göster (nokta dosyaları)`,externalFolder:`Harici Klasör`,scanFolder:`Tara`,toast:{folderCreated:`Klasör oluşturuldu`,folderDeleted:`Klasör silindi`,fileDeleted:`Dosya silindi`,filesDeleted:`{{count}} dosya silindi`,filesMoved:`Dosyalar taşındı`,folderLinked:`Klasör bağlandı`,folderUnlinked:`Klasör bağlantısı kaldırıldı`,externalFolderLinked:`Harici klasör bağlandı ve tarandı`,folderScanned:`Tarama tamamlandı: {{added}} eklendi, {{removed}} kaldırıldı`,addedToQueue:`Kuyruğa {{count}} dosya eklendi`,addedToQueuePartial:`{{added}} dosya eklendi, {{failed}} başarısız`,failedToAddToQueue:`Dosyalar eklenemedi: {{error}}`,fileRenamed:`Dosya yeniden adlandırıldı`,folderRenamed:`Klasör yeniden adlandırıldı`,thumbnailsGenerated:`{{count}} küçük resim oluşturuldu`,thumbnailsGeneratedPartial:`{{succeeded}} küçük resim oluşturuldu, {{failed}} başarısız`,noStlMissingThumbnails:`Küçük resmi eksik STL dosyası yok`,failedToGenerateThumbnails:`Küçük resimler oluşturulamadı: {{error}}`,thumbnailGenerated:`Küçük resim oluşturuldu`,failedToGenerateThumbnail:`Küçük resim oluşturulamadı: {{error}}`}},projects:{title:`Projeler`,subtitle:`3D baskı projelerinizi organize edin ve takip edin`,newProject:`Yeni Proje`,editProject:`Projeyi Düzenle`,deleteProject:`Projeyi Sil`,projectName:`Proje Adı`,description:`Açıklama`,noProjects:`Henüz proje yok`,noProjectsFiltered:`{{status}} proje yok`,noProjectsFilteredHelp:`Hiç {{status}} projeniz yok. Projeler durumları değiştiğinde burada görünecek.`,createFirst:`İlgili baskıları organize etmeye, ilerlemeyi takip etmeye ve yapımlarınızı yönetmeye başlamak için ilk projenizi oluşturun.`,createFirstButton:`İlk Projenizi Oluşturun`,create:`Oluştur`,files:`Dosyalar`,prints:`Baskılar`,plates:`plaka`,parts:`parça`,lastModified:`Son Değiştirme`,deleteConfirm:`Bu projeyi silmek istediğinizden emin misiniz? Arşivler ve kuyruk öğelerinin bağlantısı kaldırılacak ancak silinmeyecek.`,addFiles:`Dosya Ekle`,removeFile:`Dosyayı Kaldır`,viewDetails:`Detayları Görüntüle`,namePlaceholder:`örn., Voron 2.4 Yapımı`,descriptionPlaceholder:`İsteğe bağlı açıklama...`,urlLabel:`URL`,urlPlaceholder:`https://makerworld.com/...`,urlInvalid:`URL http:// veya https:// ile başlamalı`,openExternalUrl:`Proje URL'sini aç`,coverImageLabel:`Kapak fotoğrafı`,coverImageAlt:`Proje kapak fotoğrafı`,coverImageUpload:`Yükle`,coverImageReplace:`Değiştir`,coverImageRemove:`Kaldır`,color:`Renk`,targetPlates:`Hedef Plakalar`,targetPlatesPlaceholder:`örn., 25`,targetPlatesHelp:`Baskı işi sayısı`,targetParts:`Hedef Parçalar`,targetPartsPlaceholder:`örn., 150`,targetPartsHelp:`Gereken toplam nesne`,tagsLabel:`Etiketler (virgülle ayrılmış)`,tagsPlaceholder:`örn., voron, fonksiyonel, hediye`,dueDate:`Son Tarih`,priority:`Öncelik`,priorityLow:`Düşük`,priorityNormal:`Normal`,priorityHigh:`Yüksek`,priorityUrgent:`Acil`,statusActive:`Aktif`,statusCompleted:`Tamamlandı`,statusArchived:`Arşivlendi`,done:`Tamamlandı`,completed:`tamamlandı`,failed:`başarısız`,inQueue:`kuyrukta`,noPrintsYet:`Henüz baskı yok`,printJobs:`Baskı işleri (plakalar)`,partsPrinted:`Yazdırılan parçalar`,failedParts:`Başarısız parçalar`,import:`İçe Aktar`,export:`Dışa Aktar`,importProject:`Projeyi içe aktar`,exportAll:`Tüm projeleri dışa aktar`,loading:`Projeler yükleniyor...`,noEditPermission:`Projeleri düzenleme izniniz yok`,noDeletePermission:`Projeleri silme izniniz yok`,noCreatePermission:`Proje oluşturma izniniz yok`,noImportPermission:`Projeleri içe aktarma izniniz yok`,noExportPermission:`Projeleri dışa aktarma izniniz yok`,toast:{created:`Proje oluşturuldu`,updated:`Proje güncellendi`,deleted:`Proje silindi`,imported:`Proje içe aktarıldı`,multipleImported:`{{count}} proje içe aktarıldı`,importFailed:`İçe aktarma başarısız`,exported:`Projeler dışa aktarıldı (yalnızca meta veriler)`}},projectDetail:{notFound:`Proje bulunamadı`,backToProjects:`Projelere Dön`,export:`Dışa Aktar`,exportProject:`Projeyi dışa aktar`,noExportPermission:`Projeleri dışa aktarma izniniz yok`,noEditPermission:`Projeleri düzenleme izniniz yok`,partOf:`Şunun parçası:`,priorityLabel:`Öncelik:`,noPrints:`Bu projede henüz baskı yok`,status:{active:`Aktif`,completed:`Tamamlandı`,archived:`Arşivlendi`},priority:{low:`Düşük`,normal:`Normal`,high:`Yüksek`,urgent:`Acil`},dueDate:{overdue:`Gecikmiş`,today:`Bugün teslim`,daysLeft:`{{count}} gün kaldı`},progress:{platesProgress:`Plaka İlerlemesi`,partsProgress:`Parça İlerlemesi`,printJobs:`baskı işi`,parts:`parça`,percentComplete:`%{{percent}} tamamlandı`,remaining:`{{count}} kaldı`},stats:{printJobs:`Baskı İşleri`,total:`toplam`,failed:`{{count}} başarısız`,partsPrinted:`{{count}} parça yazdırıldı`,printTime:`Baskı Süresi`,filamentUsed:`Kullanılan Filament`},cost:{title:`Maliyet Takibi`,filamentCost:`Filament Maliyeti`,energy:`Enerji`,totalCost:`Toplam Maliyet`,total:`Toplam`,includesBom:`BOM dahil`,budget:`Bütçe`,remaining:`Kalan`},subProjects:{title:`Alt projeler ({{count}})`},notes:{title:`Notlar`,noEditPermission:`Notları düzenleme izniniz yok`,placeholder:`Bu proje hakkında notlar ekleyin...`,empty:`Henüz not yok. Not eklemek için Düzenle'ye tıklayın.`},files:{title:`Dosyalar`,linkFolders:`Dosya Yöneticisinden klasörleri bağla`,forQuickAccess:`hızlı erişim için bu projeye.`,fileCount:`{{count}} dosya`,empty:`Bağlı klasör yok. Dosya Yöneticisine gidin ve bu projeye bir klasör bağlayın.`,noFiles:`Bu klasörde dosya yok.`,print:`Şimdi Yazdır`,addToQueue:`Kuyruğa Ekle`},bom:{title:`Malzeme Listesi`,acquired:`{{completed}}/{{total}} edinildi`,showAll:`Tümünü göster`,hideDone:`Tamamlananları gizle`,addPart:`Parça Ekle`,noAddPermission:`Parça ekleme izniniz yok`,partNamePlaceholder:`Parça adı (örn., M3x8 vidalar)`,partName:`Parça adı`,qty:`Adet`,price:`Fiyat ({{currency}})`,sourcingUrlPlaceholder:`Kaynak URL'si (isteğe bağlı)`,remarksPlaceholder:`Notlar (isteğe bağlı)`,deletePart:`Parçayı Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz?`,noUpdatePermission:`Parçaları güncelleme izniniz yok`,noEditPermission:`Parçaları düzenleme izniniz yok`,noDeletePermission:`Parçaları silme izniniz yok`,totalCost:`Toplam maliyet:`,empty:`Malzeme listesinde parça yok. Nelerin tedarik edilmesi gerektiğini takip etmek için donanım, elektronik veya diğer bileşenler ekleyin.`},timeline:{title:`Etkinlik Zaman Çizelgesi`,empty:`Henüz etkinlik yok.`},template:{saveAsTemplate:`Şablon Olarak Kaydet`,noCreatePermission:`Şablon oluşturma izniniz yok`},queue:{title:`Kuyruk`,viewAll:`Tümünü görüntüle`,printing:`{{count}} yazdırılıyor`,queued:`{{count}} kuyrukta`},prints:{title:`Baskılar ({{count}})`},toast:{projectUpdated:`Proje güncellendi`,partAdded:`Parça eklendi`,partRemoved:`Parça kaldırıldı`,exportFailed:`Dışa aktarma başarısız`,projectExported:`Proje dışa aktarıldı`,templateCreated:`Şablon oluşturuldu`}},system:{title:`Sistem Bilgisi`,version:`Sürüm`,uptime:`Çalışma Süresi`,cpuUsage:`CPU Kullanımı`,memoryUsage:`Bellek Kullanımı`,diskUsage:`Disk Kullanımı`,networkInfo:`Ağ Bilgisi`,logs:`Günlükler`,debugMode:`Hata Ayıklama Modu`,enableDebug:`Hata Ayıklama Kaydını Etkinleştir`,disableDebug:`Hata Ayıklama Kaydını Devre Dışı Bırak`,downloadLogs:`Günlükleri İndir`,clearLogs:`Günlükleri Temizle`,dockerInfo:`Docker Bilgisi`,containerName:`Konteyner Adı`,imageName:`İmaj Adı`,platform:`Platform`,architecture:`Mimari`},sponsors:{sectionTitle:`Bağımsız ve topluluk destekli`,tagline:`Bambuddy ücretsizdir ve böyle kalır çünkü insanlar onu desteklemeyi seçer. VC yok, bulut bağımlılığı yok.`,viewSupporters:`Destekçileri görüntüle`,toastPrints:`Bambuddy ile {{count}} baskı tamamladın. Bambuddy, destekçileri sayesinde ücretsiz kalıyor.`,toastCost:`Bambuddy ile {{total}} kadar filament takip ettin. Projeyi bağımsız tutanları gör.`,toastArchives:`{{count}} baskı Bambuddy ile arşivlendi. Bağımsız kalmasını sağlayanları gör.`,toastAnniversary:`Bambuddy ile bir yılı doldurdun! Projeyi bağımsız tutanları gör.`,toastVersionUpdate:`v{{version}} sürümüne güncellendi. Bambuddy, destekçileri sayesinde ücretsiz kalıyor.`},library:{title:`Filament Kütüphanesi`,addFilament:`Filament Ekle`,editFilament:`Filamenti Düzenle`,deleteFilament:`Filamenti Sil`,vendor:`Satıcı`,material:`Malzeme`,color:`Renk`,kFactor:`K Faktörü`,temperature:`Sıcaklık`,noFilaments:`Kütüphanede filament yok`,deleteConfirm:`Bu filamenti silmek istediğinizden emin misiniz?`,importFromPrinter:`Yazıcıdan İçe Aktar`,exportToFile:`Dosyaya Dışa Aktar`},slice:{title:`Modeli dilimle`,action:`Dilimle`,actionAll:`Tüm {{count}} plakayı dilimle`,actionAllTitle:`Her plakayı tek bir çok plakalı çıktıya dilimle (tek arşiv). Filament seçimi projenin tanımladığı her yuvayı kapsar.`,allPlatesToggle:`Tüm {{count}} plakayı dilimle`,slicing:`Dilimleniyor…`,printer:`Yazıcı profili`,process:`İşlem profili`,filament:`Filament profili`,filamentSlot:`Filament {{index}} ({{type}})`,selectPreset:`— Bir ön ayar seçin —`,loadingPresets:`Ön ayarlar yükleniyor…`,analyzingPlateFilaments:`Plaka filamentleri analiz ediliyor…`,analyzingPlateFilamentsHint:`Bu plakanın hangi AMS yuvalarını kullandığını keşfetmek için bir önizleme dilimleme çalıştırılıyor. Sonradan önbelleğe alınır — yeniden açma anlıktır.`,previewToast:`{{name}} analiz ediliyor — {{elapsed}}`,previewWithProgress:`{{name}} analiz ediliyor — {{stage}} (%{{percent}}) — {{elapsed}}`,notUsedByPlate:`— bu plaka tarafından kullanılmıyor`,noPresetsForSlot:`Kullanılabilir ön ayar yok`,otherPrinters:`Diğer yazıcılar`,presetsLoadFailed:`Ön ayarlar yüklenemedi. Önce içe aktarmak için Ayarlar → Profiller'i açın.`,refreshPresets:`Yenile`,refreshPresetsTitle:`Ön ayarları yenile — en güncel bulut ve paketli listeleri getir (Bambu Studio veya Bambu Handy'de bir ön ayar sildikten sonra kullanın)`,allPresetsRequired:`Tüm ön ayarlar seçilmelidir`,enqueuing:`Dilimleme işi gönderiliyor…`,queued:`Kuyrukta…`,failed:`Dilimleme başarısız. Dilimleyici yardımcı bileşen günlüklerini kontrol edin.`,startedToast:`{{name}} arka planda dilimleniyor…`,queuedToast:`Kuyrukta: {{name}} — {{elapsed}}`,runningToast:`{{name}} dilimleniyor — {{elapsed}}`,runningWithProgress:`{{name}} — {{stage}} (%{{percent}}) — {{elapsed}}`,runningWithProgressMultiPlate:`{{plateCount}}/{{plateIndex}} plaka • {{name}} — {{stage}} (%{{percent}}) — {{elapsed}}`,completedToast:`{{name}} dilimlendi`,failedTitle:`Dilimleme başarısız`,failedToast:`{{name}} dilimleme başarısız: {{detail}}`,tier:{local:`İçe aktarılmış`,cloud:`Bambu Cloud`,orcaCloud:`Orca Cloud`,standard:`Standart`},cloud:{notAuthenticated:`Bulut ön ayarlarınızı görmek için Bambu Cloud'a giriş yapın (Ayarlar → Profiller → Bambu Cloud).`,expired:`Bambu Cloud oturumu süresi doldu — bulut ön ayarlarınızı yenilemek için tekrar giriş yapın.`,unreachable:`Bambu Cloud şu anda erişilemez. Yerel ve standart ön ayarlar hâlâ çalışıyor.`},orcaCloud:{notAuthenticated:`Orca ön ayarlarınızı görmek için Orca Cloud'a giriş yapın (Profiller → Orca Cloud).`,expired:`Orca Cloud oturumu sona erdi — Orca ön ayarlarınızı yenilemek için tekrar giriş yapın.`,unreachable:`Orca Cloud şu anda erişilemez. Diğer ön ayarlar çalışmaya devam ediyor.`},bedType:{label:`Baskı plakası`,auto:`Otomatik (işlem ön ayarı kullan)`,coolPlate:`Soğuk Plaka`,coolPlateSuperTack:`Soğuk Plaka SuperTack`,engineering:`Mühendislik Plakası`,highTemp:`Yüksek Sıcaklık Plakası`,texturedPEI:`Dokulu PEI Plakası`,smoothPEI:`Düz PEI Plakası`}},spoolman:{title:`Spoolman Entegrasyonu`,enabled:`Spoolman Etkin`,url:`Spoolman URL`,connected:`Bağlı`,disconnected:`Bağlı Değil`,testConnection:`Bağlantıyı Test Et`,sync:`Senkronize Et`,syncing:`Senkronize ediliyor...`,lastSync:`Son Senkronizasyon`,linkToSpoolman:`Spoolman'a Bağla`,openInSpoolman:`Spoolman'da Aç`,unlinkSpool:`Makara Bağlantısını Kaldır`,unlinkConfirmTitle:`Makara Atamasını Kaldır?`,unlinkConfirmMessage:`Bu, makarayı bu yuvadan kaldıracak. Makara verisinin kendisi değişmeyecek.`,selectSpool:`Makara Seç`,noUnlinkedSpools:`Atanmamış makara yok`,linkSuccess:`Makara başarıyla atandı`,linkFailed:`Makara atanamadı`,unlinkSuccess:`Makara ataması başarıyla kaldırıldı`,unlinkFailed:`Makara ataması kaldırılamadı`,linkedSpool:`Atanan makara`,spoolId:`Makara ID`,fillSourceLabel:`(Spoolman)`,weight:`Ağırlık`,remaining:`Kalan`,disableWeightSync:`AMS Tahmini Ağırlık Senkronizasyonunu Devre Dışı Bırak`,disableWeightSyncDesc:`AMS tahminlerinden kalan kapasiteyi güncelleme. AMS yüzde tabanlı tahminler yerine Spoolman'ın kullanım takibini tercih ediyorsanız bunu kullanın. Yeni makaralar yine de başlangıç ağırlığı olarak AMS tahminini kullanacak.`,reportPartialUsage:`Başarısız Baskılar için Kısmi Kullanımı Bildir`,reportPartialUsageDesc:`Bir baskı başarısız olduğunda veya iptal edildiğinde, katman ilerlemesine göre o noktaya kadar kullanılan tahmini filamenti bildir.`},locations:{title:`Depolama Konumları`,subtitle:`Makaralarınız için raf, çekmece ve diğer fiziksel depolama yerlerini yönetin`,add:`Konum Ekle`,addShort:`Ekle`,edit:`Konumu Düzenle`,name:`Ad`,spools:`Makaralar`,empty:`Henüz depolama konumu yok. İlk rafınızı veya çekmecenizi oluşturun.`,manage:`Konumlar`,createPlaceholder:`örn. Raf A, Çekmece 1`,nameRequired:`Konum adı zorunludur`,created:`Konum oluşturuldu`,updated:`Konum güncellendi`,deleted:`Konum silindi`,saveFailed:`Konum kaydedilemedi`,deleteFailed:`Konum silinemedi`,deleteBlocked:`Silmeden önce bu konumdaki tüm makaraları taşıyın`,confirmDelete:`"{{name}}" silinsin mi?`,confirmDeleteMessage:`Bu konum kataloğdan kaldırılacak. Önce makaralar taşınmalıdır.`},inventory:{title:`Makara Envanteri`,subtitle:`Makaralarınızı yönetin`,spoolmanMixedContentTitle:`Spoolman HTTPS üzerinden yüklenemiyor — tarayıcınız tarafından karışık içerik engellendi`,spoolmanMixedContentBody:`Bambuddy HTTPS üzerinden sunuluyor (ters proxy'niz aracılığıyla), ancak Spoolman URL'niz hâlâ düz HTTP. Tarayıcılar güvenlik için karışık içeriği engeller, bu nedenle gömülü Spoolman arayüzü oluşturulamaz. Bunun çalışması için Spoolman'in HTTPS üzerinden erişilebilir olması gerekiyor.`,spoolmanMixedContentFixReverseProxy:`Spoolman'i Bambuddy ile aynı ters proxy'nin (Traefik / Nginx / Caddy) arkasına HTTPS ile koyun, ardından Ayarlardaki Spoolman URL'sini yeni HTTPS adresine güncelleyin.`,spoolmanMixedContentFixOpenNewTab:`Geçici bir çözüm olarak, Spoolman'i HTTP üzerinden yeni bir tarayıcı sekmesinde açın — karışık içerik kuralları yalnızca gömülü çerçevelere uygulanır, bu nedenle bağımsız bir sekme yine çalışır.`,spoolmanOpenInNewTab:`Spoolman'i yeni sekmede aç`,labels:{title:`Makara etiketleri yazdır`,selectedCount:`{{count}} seçildi`,pickSpools:`Hangi makaralar için etiket yazdırılacağını seçin:`,searchPlaceholder:`Ad, marka veya #ID ara`,filterByMaterial:`Malzeme:`,allMaterials:`Tümü`,selectVisible:`Görünen tümünü seç ({{count}})`,deselectVisible:`Görünenleri seçimden kaldır`,clearAll:`Tümünü temizle`,noSpoolsToShow:`Gösterilecek makara yok. Filtrenizi ayarlayın ve tekrar deneyin.`,noMatches:`Mevcut arama veya filtreyle eşleşen makara yok.`,printOne:`Bu makara için etiket yazdır`,printLabels:`Etiketleri yazdır…`,bulkTitle:`Şu anda gösterilen {{count}} makaradan etiket yazdırılacak olanları seçin`,noSpoolsTitle:`Etiketlenecek makara yok`,error:`Etiketler oluşturulamadı: {{msg}}`,sortBy:{label:`Sırala:`,id:`ID'ye göre`,color:`Renge göre`},templates:{amsHolderSmall:{label:`AMS tutucu — küçük (74 × 33 mm)`,hint:`Sayfa başına tek etiket; MakerWorld model 752566 (AMS Filament Etiket Tutucu) yazdırılabilir etiketle eşleşir.`},amsHolderLarge:{label:`AMS tutucu — büyük (75 × 55 mm)`,hint:`Sayfa başına tek etiket; AMS Filament Etiket Tutucu'nun karton uçlu varyantına uyar. Numune, marka, malzeme, ID ve QR kod için yeterli yer.`},box40x30:{label:`Kutu etiketi (40 × 30 mm)`,hint:`Sayfa başına tek etiket; yaygın DK/Brother rulo boyutu, filament torbası ve depolama kutusu etiketleri için iyi.`},box:{label:`Kutu etiketi (62 × 29 mm)`,hint:`Sayfa başına tek etiket; Brother PT/QL ve Dymo küçük etiketleri için boyutlandırılmış.`},averyL7160:{label:`Avery L7160 — A4 sayfa (38.1 × 63.5 mm × 21)`,hint:`AB sayfa stoğu; A4 sayfa başına 21 etiket.`},avery5160:{label:`Avery 5160 — US Letter sayfa (25.4 × 66.7 mm × 30)`,hint:`ABD sayfa stoğu; Letter sayfası başına 30 etiket.`}}},csv:{importButton:`CSV İçe Aktar`,exportButton:`CSV Dışa Aktar`,modalTitle:`CSV'den makara içe aktar`,selectFile:`Bir CSV dosyası seçin veya buraya sürükleyin`,dragHint:`Başlık: material (zorunlu), brand, subtype, color_name, rgba, …`,parsing:`Dosya okunuyor…`,previewError:`CSV dosyası okunamadı`,validCount:`{{count}} geçerli`,errorCount:`{{count}} hatalı`,skippedCount:`{{count}} atlandı`,colRow:`Satır`,colStatus:`Durum`,colColor:`Renk`,colorResolved:`Renk katalogdan dolduruldu`,colorCrossMaterial:`Renk farklı bir malzemeden alındı — katalogda tam eşleşme yok`,duplicateExisting:`Bu malzeme, marka ve renkte bir makara zaten var — yine de yeni makara olarak içe aktarılacak`,spoolmanHint:`Spoolman modunda Spoolman'ın yerleşik CSV içe/dışa aktarımını kullanın.`,importValidRows:`{{count}} geçerli satırı içe aktar`,noValidRows:`Geçerli satır yok`,importing:`İçe aktarılıyor…`,importSuccess:`{{count}} makara içe aktarıldı`,importError:`İçe aktarma başarısız`,exportError:`Dışa aktarma başarısız`},addSpool:`Makara Ekle`,editSpool:`Makarayı Düzenle`,copySpool:`Makarayı Kopyala`,material:`Malzeme`,selectMaterial:`Malzeme seç...`,subtype:`Alt tür`,brand:`Marka`,searchBrand:`Marka ara...`,useCustomBrand:`"{{brand}}" kullan`,useCustomMaterial:`Özel malzeme kullan: {{material}}`,colorName:`Renk Adı`,colorNamePlaceholder:`Yeşim Beyazı, Ateş Kırmızısı...`,color:`Renk`,hexColor:`Hex Renk`,pickColor:`Özel renk seç`,labelWeight:`Etiket Ağırlığı`,coreWeight:`Boş Makara Ağırlığı`,searchSpoolWeight:`Makara ağırlığı ara...`,weightUsed:`Kullanılan`,currentWeight:`Kalan Ağırlık`,measuredWeight:`Ölçülen Ağırlık`,spoolName:`Makara`,costPerKg:`kg başına maliyet`,storageLocation:`Depolama Konumu`,storageLocationPlaceholder:`örn. Raf A, Çekmece 1`,openInInventory:`Envanterde Aç`,measuredWeightError:`Ölçülen ağırlık {{min}}g ile {{max}}g arasında olmalı.`,slicerFilament:`Dilimleyici Filamenti`,slicerFilamentName:`Dilimleyici Ön Ayar Adı`,slicerPreset:`Dilimleyici Ön Ayarı`,searchPresets:`Filament ön ayarlarında ara...`,selectedPreset:`Seçildi`,noPresetsFound:`Ön ayar bulunamadı`,tempOverrides:`Sıcaklık Geçersiz Kılmaları`,note:`Not`,notePlaceholder:`Bu makara hakkında ek notlar...`,category:`Kategori`,categoryPlaceholder:`örn. Üretim, Prototip, Müşteri A`,categoryNone:`Kategorisiz`,storageLocationNone:`Konum ayarlanmamış`,lowStockThresholdOverride:`Düşük stok eşiği (bu makara)`,lowStockThresholdOverrideHelp:`Global eşiği kullanmak için boş bırakın (%{{global}}).`,clearRfid:`RFID Etiketini Temizle`,rfidCleared:`RFID etiketi temizlendi`,archive:`Arşivle`,restore:`Geri Yükle`,noSpools:`Henüz makara yok. Başlamak için ilk makaranızı ekleyin.`,noAvailableSpools:`Kullanılabilir makara yok. Envanterinize bir makara ekleyin veya önce başka bir yuvadan atamayı kaldırın.`,kProfiles:`K-Profilleri`,addKProfile:`K-Profili Ekle`,assignSpool:`Makara Ata`,unassignSpool:`Atamayı Kaldır`,assignSuccess:`Makara atandı ve AMS yuvası yapılandırıldı`,assignPendingInsert:`Atandı. Makarayı yerleştirdiğinizde yuva yapılandırılacak.`,assignFailed:`Makara atanamadı`,selectSpool:`Bu yuvaya atamak için bir makara seçin`,assigned:`Atandı`,assigning:`Atanıyor...`,searchSpools:`Makaralarda ara...`,showAllSpools:`Tüm makaraları göster`,spoolmanSpools:`Spoolman Makaraları`,allMaterials:`Tüm Malzemeler`,filterByBrand:`Markaya göre filtrele...`,showArchived:`Arşivlenmişleri göster`,quickAdd:`Hızlı Ekle (Stok)`,quantity:`Miktar`,stock:`Stok`,configured:`Yapılandırıldı`,spoolsCreated:`{{count}} makara oluşturuldu`,spoolsPartiallyCreated:`{{total}} makaradan {{created}} tanesi oluşturuldu (bazıları başarısız)`,spoolCreated:`Makara oluşturuldu`,spoolUpdated:`Makara güncellendi`,spoolDeleted:`Makara silindi`,deepLinkSpoolNotFound:`Makara bulunamadı`,deepLinkFetchFailed:`Makara yüklenemedi — tekrar deneyin`,spoolArchived:`Makara arşivlendi`,spoolRestored:`Makara geri yüklendi`,kProfileSaveFailed:`K-profili ayarları kaydedilemedi`,syncWeightSpoolNotFound:`Makara bulunamadı — silinmiş olabilir`,syncWeightSpoolmanUnreachable:`Spoolman'a erişilemiyor — daha sonra tekrar deneyin`,syncWeightFailed:`Ağırlık senkronize edilemedi`,spoolmanUnreachable:`Spoolman erişilebilir değil — lütfen daha sonra tekrar deneyin`,deleteSpoolNotFound:`Makara bulunamadı — zaten silinmiş olabilir`,deleteFailed:`Makara silinemedi`,archiveSpoolNotFound:`Makara bulunamadı — zaten silinmiş olabilir`,archiveFailed:`Makara arşivlenemedi`,restoreSpoolNotFound:`Makara bulunamadı — zaten silinmiş olabilir`,restoreFailed:`Makara geri yüklenemedi`,saveFailed:`Değişiklikler kaydedilemedi`,tagClearFailed:`Etiket temizlenemedi`,deleteConfirm:`Bu makarayı silmek istediğinizden emin misiniz? Bu geri alınamaz.`,archiveConfirm:`Bu makarayı arşivlemek istediğinizden emin misiniz?`,advancedSettings:`Gelişmiş Ayarlar`,filamentInfoTab:`Filament Bilgisi`,paProfileTab:`PA Profili`,filamentInfo:`Filament`,additional:`Ek`,loadingPresets:`Bulut ön ayarları yükleniyor...`,cloudConnected:`Bulut bağlı`,cloudNotConnected:`Bulut bağlı değil (varsayılanlar kullanılıyor)`,recentColors:`Son Kullanılan`,searchColors:`Renklerde ara...`,searchResults:`Arama sonuçları`,allColors:`Tüm renkler`,commonColors:`Yaygın renkler`,showLess:`Daha az göster`,showAll:`Tümünü göster`,noColorsFound:`Aramanızla eşleşen renk yok`,noResults:`Eşleşme bulunamadı`,extraColorsLabel:`Ekstra renkler`,extraColorsPlaceholder:`EC984C,#6CD4BC,A66EB9,D87694`,extraColorsHint:`Virgülle ayrılmış 2 ile 8 arası hex durağı yapıştırın. Bir gradyan olarak görüntülenir.`,extraColorsInvalid:`Geçersiz hex yok sayıldı: {{tokens}}`,colorEffectLabel:`Efekt`,colorEffect:{none:`Yok`,sparkle:`Parıltı`,wood:`Ahşap`,marble:`Mermer`,glow:`Parlama`,matte:`Mat`,silk:`İpek`,galaxy:`Galaksi`,rainbow:`Gökkuşağı`,metal:`Metal`,translucent:`Yarı saydam`,gradient:`Gradyan`,dualColor:`Çift Renk`,triColor:`Üç Renk`,multicolor:`Çok Renkli`},selectMaterialFirst:`Lütfen önce Filament Bilgisi sekmesinde bir malzeme seçin.`,noPrintersConfigured:`Yapılandırılmış yazıcı yok. PA profillerini kullanmak için yazıcı ekleyin.`,matchingFilter:`Eşleşen`,anyBrand:`Herhangi marka`,anyVariant:`Herhangi varyant`,autoSelect:`Otomatik seç`,matches:`eşleşme`,match:`eşleşme`,noMatches:`Eşleşme yok`,connected:`Bağlı`,offline:`Çevrimdışı`,printerOffline:`Yazıcı çevrimdışı. Kalibrasyon profillerini görüntülemek için bağlanın.`,noKProfilesMatch:`Seçilen filamentle eşleşen K-profili yok.`,leftNozzle:`Sol Nozul`,rightNozzle:`Sağ Nozul`,profilesSelected:`kalibrasyon profili seçildi`,totalInventory:`Toplam Envanter`,totalConsumed:`Toplam Tüketim`,byMaterial:`Malzemeye Göre`,inPrinter:`Yazıcıda`,lowStock:`Düşük Stok`,sinceTracking:`Takip başladığından beri`,resetConsumedCounter:`Sayacı sıfırla`,resetConsumedCounterTooltip:`Bu makara için tüketilen gram sayacını sıfırla. Kalan ağırlık değişmez.`,resetConsumedCounterConfirm:`Bu makaranın tüketilen gram sayacı 0'a sıfırlansın mı? Gelecekteki baskılar sıfırdan tekrar takip edilecek. Makaranın kendisi, kalan ağırlık hesaplaması ve ayarlarınız değiştirilmez.`,resetAllConsumedCounters:`Tüm sayaçları sıfırla`,resetAllConsumedCountersTooltip:`Her makarada tüketilen gram sayacını sıfırla. Kalan ağırlıklar değişmez.`,resetAllConsumedCountersConfirm:`Tüm {{count}} makaradaki (arşivlenmişler dahil) tüketilen gram sayacı 0'a sıfırlansın mı? Bu, "Toplam Tüketim" istatistiğini temizler, böylece gelecekteki baskılar sıfırdan takip edilir. Makaralar ve kalan ağırlıklar değiştirilmez.`,consumedCounterReset:`Sayaç sıfırlandı`,allConsumedCountersReset:`{{count}} makaranın sayacı sıfırlandı`,resetConsumedCounterFailed:`Sayaç sıfırlanamadı`,loadedInAms:`AMS/Ext'te Yüklü`,remaining:`Kalan`,weightCheck:`Ağırlık Kontrolü`,lastWeighed:`Son tartım`,neverWeighed:`Hiç tartılmadı`,search:`Makaralarda ara...`,showing:`Gösterilen`,to:`-`,of:`/`,show:`Göster`,spools:`makara`,spool:`makara`,page:`Sayfa`,noSpoolsMatch:`Sonuç bulunamadı`,noSpoolsMatchDesc:`Aradığınızı bulmak için aramanızı veya filtrelerinizi ayarlamayı deneyin.`,active:`Aktif`,archived:`Arşivlendi`,all:`Tümü`,used:`Kullanılmış`,new:`Yeni`,clearFilters:`Filtreleri temizle`,table:`Tablo`,cards:`Kartlar`,net:`Net`,groupSimilar:`Grupla`,groupedSpools:`{{count}} aynı makara`,groupedRows:`satır`,columns:`Sütunlar`,configureColumns:`Sütunları Yapılandır`,configureColumnsDesc:`Sütunları yeniden sıralamak için sürükleyin veya okları kullanın. Göz simgesiyle görünürlüğü değiştirin.`,visible:`görünür`,reset:`Sıfırla`,cancel:`İptal`,applyChanges:`Değişiklikleri Uygula`,moveUp:`Yukarı taşı`,moveDown:`Aşağı taşı`,hideColumn:`Sütunu gizle`,showColumn:`Sütunu göster`,linkToSpool:`Makaraya Bağla`,tagLinked:`Etiket makaraya bağlandı`,tagLinkFailed:`Etiket bağlanamadı`,tagAlreadyLinked:`Etiket zaten başka bir makaraya bağlı`,unknownTag:`Bilinmeyen RFID etiketi algılandı`,usageHistory:`Kullanım Geçmişi`,noUsageHistory:`Henüz kullanım kaydedilmedi`,printName:`Baskı Adı`,weightConsumed:`Tüketilen Ağırlık`,clearHistory:`Temizle`,historyCleared:`Kullanım geçmişi temizlendi`,fillSourceLabel:`(Env)`,lowStockThresholdError:`Eşik 0.1 ile 99.9 arasında olmalı`,assignMismatchTitle:`Malzeme uyumsuzluğu`,assignMismatchMessage:`Seçilen makara malzemesi "{{spoolMaterial}}", {{location}} için tepsi malzemesi "{{trayMaterial}}" ile eşleşmiyor. Yine de atansın mı?`,assignMismatchConfirm:`Yine de Ata`,assignPartialMismatchMessage:`Makara malzemesi "{{spoolMaterial}}", {{location}} konumundaki "{{trayMaterial}}" ile benzer ancak tam olarak eşleşmiyor. Devam etmek istiyor musunuz?`,assignProfileMismatchMessage:`Makara profili "{{spoolProfile}}", {{location}} konumundaki tepsi profili "{{trayProfile}}" ile eşleşmiyor. Devam etmek istiyor musunuz?`,assignReconfigureNote:`AMS yuvası, makaranın profilini kullanacak şekilde yeniden yapılandırılacak.`,spoolmanFilamentCatalog:`Spoolman Filament Kataloğu`,pickFromSpoolmanCatalog:`Spoolman kataloğundan seç…`,spoolmanFilamentSelected:`Filament Spoolman kataloğundan seçildi`,spoolmanFilamentUnlinked:`Filament katalog bağlantısı temizlendi`,noSpoolmanFilaments:`Spoolman kataloğunda filament bulunamadı`,spoolmanFilamentColorSwatch:`Filament rengi`,spoolWeightManagedBySpoolman:`Boş makara ağırlığı Spoolman'de filament türü başına yönetilir`,spoolmanCatalogLoadFailed:`Spoolman filament kataloğu yüklenemedi`},timelapse:{title:`Zaman Atlamalı Video`,create:`Zaman Atlamalı Video Oluştur`,download:`İndir`,delete:`Sil`,preview:`Önizleme`,frameRate:`Kare Hızı`,quality:`Kalite`,processing:`İşleniyor...`,noTimelapses:`Kullanılabilir zaman atlamalı video yok`},ams:{title:`AMS`,slot:`Yuva`,empty:`Boş`,emptySlot:`Boş yuva`,slotEmpty:`Boş`,slotUnconfigured:`?`,emptySlotReset:`Atanmış filament yok`,unknown:`Bilinmiyor`,humidity:`Nem`,temperature:`Sıcaklık`,filamentType:`Filament Türü`,filamentColor:`Renk`,remaining:`Kalan`,history:`AMS Geçmişi`,noHistory:`Geçmiş mevcut değil`,configureSlot:`Yuvayı Yapılandır`,externalSpool:`Harici Makara`,profile:`Profil`,kFactor:`K Faktörü`,fill:`Doldur`,configure:`Yapılandır`,used:`kullanılan`,remainingUnit:`kalan`},printModal:{title:`Baskıyı Başlat`,selectPrinter:`Yazıcı Seç`,selectPlate:`Plaka Seç`,filamentMapping:`Filament Eşlemesi`,totalCost:`Toplam maliyet:`,slotRemainingShort:` - {{grams}}g kaldı`,printSettings:`Baskı Ayarları`,bedLeveling:`Tabla Seviyelendirme`,flowCalibration:`Akış Kalibrasyonu`,vibrationCalibration:`Titreşim Kalibrasyonu`,layerInspection:`İlk Katman Denetimi`,timelapse:`Zaman Atlamalı Video`,startPrint:`Baskıyı Başlat`,addToQueue:`Kuyruğa Ekle`,cancel:`İptal`,noPrintersAvailable:`Kullanılabilir yazıcı yok`,printerBusy:`Yazıcı meşgul`,printerOffline:`Yazıcı çevrimdışı`,sameTypeDifferentColor:`Aynı tür, farklı renk`,filamentTypeNotLoaded:`Filament türü yüklenmedi`,openCalendar:`Takvimi aç`,leftNozzle:`S`,rightNozzle:`R`,leftNozzleTooltip:`Sol nozul`,rightNozzleTooltip:`Sağ nozul`,filamentOverride:`Filament Geçersiz Kılma`,filamentOverrideHint:`Model tabanlı atama için isteğe bağlı olarak filamentleri geçersiz kıl. Planlayıcı, orijinal 3MF değerleri yerine seçtiğiniz filamentlere göre eşleşecek.`,originalFilament:`Orijinal`,overrideWith:`Şununla geçersiz kıl`,resetToOriginal:`Orijinale sıfırla`,insufficientFilamentTitle:`Yeterli filament yok`,insufficientFilamentMessage:`Bazı atanmış makaralarda bu baskının ihtiyaç duyduğundan daha az filament kaldı:`,insufficientFilamentLine:`{{printer}} - {{slot}}: {{required}}g gerekli, {{remaining}}g kaldı`,printAnyway:`Yine de yazdır`,forceColorMatch:`Renk eşleşmesini zorla`,staggerPrinterStarts:`Yazıcı başlangıçlarını kademelendir`,staggerGroupSize:`Grup boyutu`,staggerInterval:`Aralık (dk)`,staggerPreview:`{{printers}} yazıcı → {{size}} kişilik {{groups}} grup, her {{interval}} dk'da bir başlatılıyor`,staggerLastGroup:`son grup: {{count}}`,staggerTotal:`toplam: {{minutes}} dk`,staggerToPrinters:`{{count}} yazıcıya kademelendir`,gcodeInjection:`Otomatik baskı G-kodu enjekte et`},backup:{includesEncryptionKey:`Yerel yedekler, yedek ZIP'nin kendi içinde tamamlanmış olması için MFA şifreleme anahtarı dosyasını (DATA_DIR/.mfa_encryption_key) içerir. ZIP'yi hassas olarak değerlendirin — dosyaya sahip olan herkes içinde saklanan OIDC istemci gizli anahtarlarını ve TOTP gizli anahtarlarını çözebilir.`,title:`Yedekleme ve Geri Yükleme`,createBackup:`Yedek Oluştur`,restoreBackup:`Yedeği Geri Yükle`,restoreDescription:`Tüm verileri bir yedek dosyasından değiştir`,downloadBackup:`Yedeği İndir`,uploadBackup:`Yedek Yükle`,lastBackup:`Son Yedek`,autoBackup:`Otomatik Yedekleme`,backupNow:`Şimdi Yedekle`,restoreWarning:`Uyarı: Bir yedeği geri yüklemek tüm mevcut verilerin üzerine yazacak.`,includeArchives:`Arşivleri Dahil Et`,includeSettings:`Ayarları Dahil Et`,includeProfiles:`Profilleri Dahil Et`,backupSuccess:`Yedek başarıyla oluşturuldu`,restoreSuccess:`Yedek başarıyla geri yüklendi`,backupFailed:`Yedekleme başarısız`,restoreFailed:`Geri yükleme başarısız`,restoreNote:`Geri yükleme sırasında Sanal Yazıcı durdurulacak`,githubBackup:`Git Yedekleme`,enabled:`Etkin`,cloudLoginRequired:`Bambu Cloud girişi gerekli. GitHub yedeklemesini etkinleştirmek için Profiller → Bulut Profilleri altında giriş yapın.`,cloudLoginRequiredShort:`Bulut girişi gerekli`,githubDescription:`Yedekleme ve sürüm geçmişi için profillerinizi otomatik olarak özel bir GitHub deposuna senkronize et.`,repoIsPrivate:`Depo özel — yedeklemek için güvenli.`,repoIsPublicWarning:`Depo HERKESE AÇIK. Bambuddy yedekleri MQTT kimlik bilgilerini, Home Assistant belirteçlerini, Prometheus belirteçlerini, Bambu Cloud e-postanızı ve K-profilleri aracılığıyla yazıcı erişim kodlarını içerir. Sağlayıcınızın ayarlarında depoyu özel hale getirene kadar kaydetme engellenir.`,repoVisibilityUnknown:`Depo görünürlüğü belirlenemedi. Bambuddy, özel olarak onaylanmamış hiçbir şeye yedekleme yapmayı reddeder; kaydetme engellenecek.`,repositoryUrl:`Depo URL'si`,repoUrlPlaceholderGitHub:`https://github.com/username/repo-name`,repoUrlPlaceholderGitea:`https://gitea.example.com/username/repo-name`,repoUrlPlaceholderForgejo:`https://forgejo.example.com/username/repo-name`,repoUrlPlaceholderGitLab:`https://gitlab.com/username/repo-name`,allowInsecureHttp:`Güvensiz HTTP'ye izin ver`,allowInsecureHttpHint:`TLS olmadan özel ağlarda kendi barındırılan örnekler için etkinleştir`,personalAccessToken:`Kişisel Erişim Belirteci`,tokenSaved:`(kaydedildi)`,enterNewToken:`Güncellemek için yeni belirteç girin`,tokenHint:`Contents okuma/yazma izni olan ayrıntılı belirteç`,branch:`Dal`,provider:`Git Sağlayıcısı`,providerGitHub:`GitHub`,providerGitLab:`GitLab`,providerGitea:`Gitea`,providerForgejo:`Forgejo`,manualOnly:`Yalnızca manuel`,hourly:`Saatlik`,daily:`Günlük`,weekly:`Haftalık`,includeInBackup:`Yedeğe dahil et`,kProfiles:`K-Profilleri`,kProfilesDescription:`Bağlı yazıcılardan basınç ilerleme kalibrasyonu`,noPrintersConnected:`Bağlı yazıcı yok`,printersConnected:`{{connected}}/{{total}} bağlı`,cloudProfiles:`Bulut Profilleri`,cloudProfilesDescription:`Bambu Cloud'dan filament, yazıcı ve işlem ön ayarları`,appSettings:`Uygulama Ayarları`,appSettingsDescription:`Bambuddy yapılandırması (tam veritabanı)`,spoolInventory:`Makara Envanteri`,spoolInventoryDescription:`Filament makaraları, kullanım geçmişi ve maliyet takibi`,printArchives:`Baskı Arşivleri`,printArchivesDescription:`Baskı geçmişi meta verileri (gcode/3MF dosyaları yok)`,lastBackupAt:`Son yedek:`,noBackupsYet:`Henüz yedek yok`,next:`Sonraki:`,startingBackup:`Yedekleme başlatılıyor...`,test:`Test`,enableBackup:`Yedeklemeyi Etkinleştir`,testConnection:`Bağlantıyı Test Et`,enterRepoUrl:`Depo URL'sini girin`,enterRepoAndToken:`Depo URL'si ve erişim belirteci girin`,repoRequired:`Depo URL'si gerekli`,tokenRequired:`Erişim belirteci gerekli`,githubBackupEnabled:`GitHub yedeklemesi etkinleştirildi`,tokenUpdated:`Belirteç güncellendi`,settingsSaved:`Ayarlar kaydedildi`,failedToSave:`Kaydedilemedi: {{message}}`,backupCompleteFiles:`Yedekleme tamamlandı - {{count}} dosya güncellendi`,backupSkippedNoChanges:`Yedekleme atlandı - değişiklik yok`,backupFailed2:`Yedekleme başarısız: {{message}}`,clearedLogs:`{{count}} günlük temizlendi`,failedToClearLogs:`Günlükler temizlenemedi: {{message}}`,history:`Geçmiş`,clear:`Temizle`,date:`Tarih`,status:`Durum`,commit:`Commit`,localBackup:`Yerel Yedekleme`,localBackupDescription:`Veritabanı, arşivler, yüklemeler ve tüm dosyalar dahil Bambuddy verilerinizin tam bir yedeğini oluşturun.`,downloadBackupLabel:`Yedeği İndir`,completeBackupZip:`Tam yedek: veritabanı + tüm dosyalar (ZIP)`,download:`İndir`,preparingBackup:`Yedek hazırlanıyor...`,creatingArchive:`Yedek arşivi oluşturuluyor... Büyük arşivler için bu biraz zaman alabilir.`,downloadingFile:`Yedek dosyası indiriliyor...`,backupDownloaded:`Yedek başarıyla indirildi`,failedToCreateBackup:`Yedek oluşturulamadı: {{message}}`,restore:`Geri Yükle`,restoreReplacesAll:`Geri yükleme tüm verilerin yerine geçer.`,restoreReplacesAllDetail:`Mevcut veritabanınız ve dosyalarınız tamamen değiştirilecek. Geri yüklemeden sonra yeniden başlatma gerekli.`,restoreConfirmTitle:`Yedeği Geri Yükle`,restoreConfirmMessage:`"{{filename}}" dosyasından geri yüklemek istediğinizden emin misiniz? Bu, mevcut veritabanınızı ve tüm dosyaları tamamen değiştirecek. Geri yüklemeden sonra uygulamanın yeniden başlatılması gerekecek.`,restoreConfirmButton:`Yedeği Geri Yükle`,uploadingFile:`Yedek dosyası yükleniyor...`,backupRestoredRestart:`Yedek geri yüklendi. Lütfen Bambuddy'yi yeniden başlatın.`,failedToRestore:`Yedek geri yüklenemedi. Lütfen dosya formatını kontrol edin.`,reloadNow:`Şimdi Yeniden Yükle`,creatingBackup:`Yedek Oluşturuluyor`,restoringBackup:`Yedek Geri Yükleniyor`,preparing:`Hazırlanıyor...`,processing:`İşleniyor...`,doNotClosePage:`Lütfen bu sayfayı kapatmayın veya başka bir yere gitmeyin. Büyük yedekler için bu işlem birkaç dakika sürebilir.`,restoring:`Geri yükleniyor...`,restoreComplete:`Geri Yükleme Tamamlandı`,restoreFailed2:`Geri Yükleme Başarısız`,importSettings:`Ayarları bir yedek dosyasından içe aktar`,pleaseWaitRestoring:`Verileriniz geri yüklenirken lütfen bekleyin`,selectBackupFile:`Yedek dosyası seçmek için tıklayın (.json veya .zip)`,duplicateHandling:`Yinelenen yönetiminin nasıl çalıştığı:`,matchPrinters:`Yazıcılar`,matchPrintersBy:`seri numarasına göre eşleşti`,matchSmartPlugs:`Akıllı Prizler`,matchSmartPlugsBy:`IP adresine göre eşleşti`,matchNotificationProviders:`Bildirim Sağlayıcıları`,matchNotificationProvidersBy:`ada göre eşleşti`,matchFilaments:`Filamentler`,matchFilamentsBy:`ad + tür + markaya göre eşleşti`,matchArchives:`Arşivler`,matchArchivesBy:`içerik hash'ine göre eşleşti (her zaman atlanır)`,matchPendingUploads:`Bekleyen Yüklemeler`,matchPendingUploadsBy:`dosya adına göre eşleşti`,matchSettingsTemplates:`Ayarlar ve Şablonlar`,matchSettingsTemplatesBy:`her zaman üzerine yazılır`,replaceExisting:`Mevcut veriyi değiştir`,keepExisting:`Mevcut veriyi koru`,overwriteDescription:`Zaten mevcut olan öğeleri yedek verisiyle üzerine yaz`,keepDescription:`Yalnızca zaten mevcut olmayan öğeleri geri yükle`,overwriteCaution:`Dikkat:`,overwriteWarning:`Üzerine yazma, mevcut yapılandırmalarınızı yedekten gelen verilerle değiştirecek. Güvenlik için yazıcı erişim kodları asla üzerine yazılmaz.`,cancel:`İptal`,processingBackup:`Yedek dosyası işleniyor...`,itemsRestored:`Geri Yüklenen Öğeler`,itemsSkipped:`Atlanan Öğeler`,restored:`Geri yüklendi`,skippedAlreadyExist:`Atlandı (zaten mevcut)`,filesCategory:`Dosyalar (3MF, küçük resimler, vb.)`,andMore:`...ve {{count}} daha`,newApiKeysGenerated:`Yeni API Anahtarları Oluşturuldu`,keysShownOnce:`Bu anahtarlar yalnızca bir kez gösterilir. Şimdi kopyalayın!`,copy:`Kopyala`,noDataFound:`Yedek dosyasında geri yüklenecek veri bulunamadı.`,close:`Kapat`,scheduledBackup:`Zamanlanmış Yedekler`,scheduledBackupDescription:`Zamanlamaya göre otomatik olarak yedek anlık görüntüleri oluşturun. Çıktı dizini bir NAS veya harici depolama alanına bağlanabilir.`,frequency:`Sıklık`,backupTime:`Saat`,retention:`Saklama`,retentionDescription:`Saklanacak yedek sayısı`,outputPath:`Çıktı Yolu`,outputPathPlaceholder:`Varsayılan: {{path}}`,outputPathDescription:`Varsayılan konum için boş bırakın`,runNow:`Şimdi Çalıştır`,backupFiles:`Yedek Dosyaları`,noScheduledBackups:`Henüz yedek yok`,deleteBackup:`Sil`,deleteBackupConfirm:`Bu yedek dosyası silinsin mi?`,backupRunning:`Yedekleme devam ediyor...`,scheduledBackupComplete:`Yedekleme başarıyla tamamlandı`,scheduledBackupFailed:`Yedekleme başarısız`,nextBackup:`Sonraki yedek`,backupSize:`Boyut`,localTimeHint:`Yerel saat ({{tz}})`,defaultPathLabel:`Varsayılan:`,categories:{settings:`Ayarlar`,notification_providers:`Bildirim Sağlayıcıları`,notification_templates:`Bildirim Şablonları`,smart_plugs:`Akıllı Prizler`,printers:`Yazıcılar`,filaments:`Filamentler`,maintenance_types:`Bakım Türleri`,archives:`Arşivler`,projects:`Projeler`,pending_uploads:`Bekleyen Yüklemeler`,external_links:`Harici Bağlantılar`,api_keys:`API Anahtarları`}},tags:{title:`Etiketler`,addTag:`Etiket Ekle`,editTag:`Etiketi Düzenle`,deleteTag:`Etiketi Sil`,tagName:`Etiket Adı`,tagColor:`Etiket Rengi`,noTags:`Etiket yok`,deleteConfirm:`Bu etiketi silmek istediğinizden emin misiniz?`,manageTags:`Etiketleri Yönet`},uploadModal:{title:`3MF Dosyalarını Yükle`,dragDrop:`.3mf dosyalarını buraya sürükleyip bırakın`,or:`veya`,browseFiles:`Dosyalara Göz At`,extractionInfo:`Yazıcı modeli, 3MF dosya meta verilerinden otomatik olarak çıkarılacak.`,uploaded:`yüklendi`,failed:`başarısız`,uploading:`Yükleniyor...`,upload:`Yükle`,uploadFailed:`Yükleme başarısız`},editArchive:{title:`Arşivi Düzenle`,name:`Ad`,namePlaceholder:`Baskı adı`,printer:`Yazıcı`,noPrinter:`Yazıcı yok`,project:`Proje`,noProject:`Proje yok`,itemsPrinted:`Yazdırılan Öğeler`,itemsPrintedHelp:`Bu baskı işinde üretilen öğe sayısı`,notes:`Notlar`,notesPlaceholder:`Bu baskı hakkında notlar ekleyin...`,externalLink:`Harici Bağlantı`,externalLinkPlaceholder:`https://printables.com/model/...`,externalLinkHelp:`Printables, Thingiverse veya başka bir kaynağa bağlantı`,tags:`Etiketler`,tagsPlaceholder:`Etiketler ekle...`,addMoreTags:`Daha fazla etiket ekle...`,matchingTags:`"{{query}}" ile eşleşen`,existingTags:`Mevcut etiketler`,clickToAdd:`(eklemek için tıklayın)`,status:`Durum`,failureReason:`Başarısızlık Nedeni`,selectReason:`Neden seç...`,photos:`Yazdırılan Sonuç Fotoğrafları`,photosHelp:`Yazdırılan sonuçunuzun fotoğraflarını eklemek için + tıklayın`,printResult:`Baskı sonucu`,saving:`Kaydediliyor...`,failureReasons:{adhesionFailure:`Yapışma başarısız`,spaghettiDetached:`Spagetti / Ayrılmış`,layerShift:`Katman kayması`,cloggedNozzle:`Tıkalı nozul`,filamentRunout:`Filament bitti`,warping:`Bükülme`,stringing:`İplik oluşumu`,underExtrusion:`Az ekstrüzyon`,powerFailure:`Güç kesintisi`,userCancelled:`Kullanıcı iptal etti`,other:`Diğer`},statuses:{completed:`Tamamlandı`,failed:`Başarısız`,aborted:`İptal edildi`,printing:`Yazdırılıyor`}},kProfiles:{title:`K-Profilleri`,noPrintersConfigured:`Yapılandırılmış Yazıcı Yok`,addPrinterInSettings:`K-profillerini yönetmek için Ayarlarda bir yazıcı ekleyin`,noActivePrinters:`Aktif Yazıcı Yok`,enablePrinterConnection:`K-profillerini görüntülemek için bir yazıcı bağlantısını etkinleştirin`,loadingProfiles:`K-Profilleri yükleniyor...`,printerOffline:`Yazıcı Çevrimdışı`,printerOfflineDesc:`Seçilen yazıcı bağlı değil. K-profillerini görüntülemek için açın.`,noMatchingProfiles:`Eşleşen Profil Yok`,noMatchingProfilesDesc:`Arama kriterlerinizle eşleşen profil yok`,noKProfiles:`K-Profili Yok`,noKProfilesDesc:`{{diameter}}mm nozul için basınç ilerleme profili bulunamadı`,createFirstProfile:`İlk Profili Oluştur`,printer:`Yazıcı`,nozzle:`Nozul`,refresh:`Yenile`,addProfile:`Profil Ekle`,export:`Dışa Aktar`,import:`İçe Aktar`,select:`Seç`,selectAll:`Tümünü Seç`,delete:`Sil`,searchPlaceholder:`Ad veya filamente göre ara...`,allExtruders:`Tüm Ekstrüderler`,leftOnly:`Yalnızca Sol`,rightOnly:`Yalnızca Sağ`,allFlow:`Tüm Akış`,hfOnly:`Yalnızca HF`,sOnly:`Yalnızca S`,sortName:`Sırala: Ad`,sortKValue:`Sırala: K-Değeri`,sortFilament:`Sırala: Filament`,leftExtruder:`Sol Ekstrüder`,rightExtruder:`Sağ Ekstrüder`,modal:{addTitle:`K-Profili Ekle`,editTitle:`K-Profilini Düzenle`,profileName:`Profil Adı`,profileNamePlaceholder:`PLA Profilim`,kValue:`K-Değeri`,kValuePlaceholder:`0.020`,kValueHelp:`Tipik aralık: PLA için 0.01 - 0.06, PETG için 0.02 - 0.10`,filament:`Filament`,selectFilament:`Filament seç...`,noFilamentsHelp:`Filament bulunamadı. Önce Bambu Studio'da bir K-profili oluşturun.`,flowType:`Akış Türü`,highFlow:`Yüksek Akış`,standard:`Standart`,nozzleSize:`Nozul Boyutu`,extruder:`Ekstrüder`,extruders:`Ekstrüderler`,left:`Sol`,right:`Sağ`,notes:`Notlar (yerel olarak saklanır)`,notesPlaceholder:`Bu profil hakkında notlar ekleyin...`,notesHelp:`Notlar yazıcıda değil, Bambuddy'de kaydedilir`,syncing:`Yazıcıyla senkronize ediliyor...`,savingExtruder:`Ekstrüdere kaydediliyor {{current}}/{{total}}...`,pleaseWait:`Lütfen bekleyin`},deleteConfirm:{title:`Profili Sil`,cannotUndo:`Bu geri alınamaz`,message:`"{{name}}" yazıcıdan silmek istediğinizden emin misiniz?`},bulkDelete:{title:`Profilleri Sil`,cannotUndo:`Bu geri alınamaz`,message:`Yazıcıdan seçili {{count}} profili silmek istediğinizden emin misiniz?`},toast:{profileSaved:`K-profili kaydedildi`,profilesSaved:`{{count}} ekstrüdere K-profili kaydedildi`,selectAtLeastOneExtruder:`Lütfen en az bir ekstrüder seçin`,profileDeleted:`K-profili silindi`,profilesDeleted:`{{count}} profil silindi`,exportedProfiles:`{{count}} profil dışa aktarıldı`,importedProfiles:`{{total}} profilden {{count}} tanesi içe aktarıldı`,noProfilesToExport:`Dışa aktarılacak profil yok`,invalidFileFormat:`Geçersiz dosya formatı`,failedToParseImport:`İçe aktarma dosyası ayrıştırılamadı`,failedToSaveBatch:`K-profilleri kaydedilemedi`,noteSaved:`Not kaydedildi`,failedToSaveNote:`Not kaydedilemedi`},permission:{noRead:`Profilleri yenileme izniniz yok`,noCreate:`Profil ekleme izniniz yok`,noUpdate:`K-profillerini güncelleme izniniz yok`,noDelete:`K-profillerini silme izniniz yok`,noExport:`Profilleri dışa aktarma izniniz yok`,noImport:`Profilleri içe aktarma izniniz yok`}},virtualPrinter:{title:`Sanal Yazıcı`,running:`Çalışıyor`,stopped:`Durduruldu`,description:{default:`Bambu Studio ve OrcaSlicer'da görünen bir sanal yazıcı etkinleştirin. Bu yazıcıya gönderilen dosyalar yazdırılmadan doğrudan arşivlenecek.`,proxy:`Dilimleyici trafiğini gerçek bir yazıcıya ileten bir proxy etkinleştirin, böylece herhangi bir ağ üzerinden uzaktan baskı yapabilirsiniz.`},enable:{title:`Sanal Yazıcıyı Etkinleştir`,visibleInSlicer:`Dilimleyici keşfinde "Bambuddy" olarak görünür`,proxyingTo:`{{name}} cihazına proxy yapılıyor`,notActive:`Aktif değil`},model:{title:`Yazıcı Modeli`,description:`Öykünülecek yazıcı modelini seçin.`,restartWarning:`Modeli değiştirmek sanal yazıcıyı yeniden başlatacak`},accessCode:{title:`Erişim Kodu`,isSet:`Erişim kodu ayarlandı`,notSet:`Erişim kodu ayarlanmadı - etkinleştirmek için gerekli`,placeholder:`8 karakterli kodu girin`,placeholderChange:`Değiştirmek için yeni kodu girin`,hint:`Tam olarak 8 karakter olmalı. Dilimleyiciler tarafından kimlik doğrulama için kullanılır.`,charCount:`({{count}}/8)`,inheritedFromTarget:`Hedef yazıcıdan devralındı`,derivedFromTargetHint:`Hedef yazıcının erişim kodunu kullanır. Köprü, dilimleyicinin kimlik doğrulamasını gerçek yazıcıya iletir, bu nedenle kodlar eşleşmelidir — değiştirmek için yazıcının ayarlarında erişim kodunu düzenleyin.`,reveal:`Erişim kodunu göster`,hide:`Erişim kodunu gizle`},targetPrinter:{title:`Hedef Yazıcı`,configured:`Proxy hedefi yapılandırıldı`,notConfigured:`Hedef yazıcı seçilmedi - proxy modu için gerekli`,placeholder:`Bir yazıcı seçin...`,hint:`Dilimleyici trafiğine proxy yapmak için yazıcıyı seçin. Yazıcı LAN modunda olmalıdır.`,noPrinters:`Yapılandırılmış yazıcı yok. Proxy modunu kullanmak için önce bir yazıcı ekleyin.`},remoteInterface:{title:`Ağ Arayüzü Geçersiz Kılma`,configured:`Arayüz geçersiz kılma aktif`,optional:`İsteğe bağlı - otomatik algılanan IP yanlışsa kullanın (örn. birden fazla NIC, Docker, VPN)`,placeholder:`Otomatik algıla (varsayılan)...`,hint:`SSDP üzerinden tanıtılan ve TLS sertifikasında kullanılan IP adresini geçersiz kıl. Bambuddy birden fazla ağ arayüzüne sahip olduğunda kullanışlıdır.`},mode:{title:`Mod`,archive:`Arşiv`,archiveDesc:`Dosyaları hemen arşivle`,review:`İnceleme`,reviewDesc:`Arşivlemeden önce incele`,queue:`Kuyruk`,queueDesc:`Arşivle ve kuyruğa ekle`,proxy:`Proxy`,proxyDesc:`Gerçek yazıcıya ilet`},autoDispatch:{title:`Otomatik sevk`,description:`Kuyruğa eklendiğinde baskıları otomatik olarak başlat. Kapalıyken, baskılar manuel sevki bekler.`},queueForceColorMatch:{title:`Renk eşleşmesini zorla`,description:`Tam olarak doğru filament türü ve rengi yüklü olmayan bir yazıcıya sevk etmeyi reddet. Varsayılan olarak kapalı — bu olmadan kuyruk yalnızca model eşleşmesi kullanır ve yanlış renk yüklü bir yazıcı seçebilir.`},gcodeInjection:{title:`G-code enjeksiyonu`,description:`Ayarlar'da model bazında yapılandırılan G-code parçacıklarını bu VP'nin işlerine uygular. Varsayılan olarak kapalı.`},tailscaleDisabled:{title:`Tailscale entegrasyonu`,description:`Bu VP'yi Tailscale üzerinden açıkta olarak işaretlemek için etkinleştirin. Dilimleyiciye hangi IP'yi yapıştıracağınızı bilmeniz için ana bilgisayarın Tailscale adresini gösterir. CA içe aktarma adımı değişmedi — bu anahtarın sertifikalar üzerinde etkisi yoktur.`},setupRequired:{title:`Kurulum Gerekli`,description:`Sanal yazıcı özelliği çalışmadan önce ek sistem yapılandırması gerektirir. Bu, port yönlendirme, güvenlik duvarı kuralları ve platforma özgü ayarları içerir.`,readGuide:`Etkinleştirmeden önce kurulum kılavuzunu okuyun`},archiveNameSource:{title:`Arşiv ad kaynağı`,description:`Dosyalar sanal yazıcı aracılığıyla geldiğinde yeni arşivlerin nasıl adlandırılacağını seçin. "Meta veri" 3MF'den dilimleyici-gömülü başlığı kullanır (varsayılan). "Dosya adı" Bambu Studio'nun FTP üzerinden gönderdiği dosya adını kullanır. Not: Bambu Studio, 3MF'de bir Başlık alanı varsa "yazıcıya gönder" iletişim kutusunda yazdığınız adı bu alanla geçersiz kılar, bu nedenle her iki mod da genellikle aynı dizeyi üretir.`,metadata:`Meta veri`,filename:`Dosya adı`},caCert:{title:`Dilimleyici sertifikası`,description:`Sanal yazıcılar Bambuddy CA tarafından imzalanmış bir TLS sertifikası kullanır. Bağlantıyı kabul etmesi için bu CA sertifikasını dilimleyicinizin güven deposuna bir kez içe aktarın — komut satırından kopyalamaya gerek yok.`,copy:`Kopyala`,copied:`Kopyalandı`,download:`İndir`,fingerprint:`SHA-256`},howItWorks:{title:`Nasıl çalışır`,step1:`Aynı LAN'da, sanal yazıcılar dilimleyicinizde (Bambu Studio / OrcaSlicer) keşif yoluyla otomatik olarak görünür. Diğer ağlardan, IP adresi ve erişim koduyla manuel olarak ekleyin.`,step2:`3MF dosyalarını Bambuddy'ye yüklemek için Arşiv, İnceleme ve Kuyruk modlarında dilimleyicinizdeki "Gönder" düğmesini kullanın. Dilimleyici "Baskı başarılı" gösterecek — dosya saklanır, yazdırılmaz.`,step3:`Proxy modunda, sanal yazıcı tüm trafiği gerçek bir yazıcıya iletir — baskılar doğrudan bağlıymış gibi hemen başlar.`},status:{title:`Durum Ayrıntıları`,printerName:`Yazıcı Adı`,model:`Model`,serialNumber:`Seri Numarası`,mode:`Mod`,pendingFiles:`Bekleyen Dosyalar`,targetPrinter:`Hedef Yazıcı`,ftpPort:`FTP Portu`,mqttPort:`MQTT Portu`,ftpConnections:`FTP Bağlantıları`,mqttConnections:`MQTT Bağlantıları`},toast:{updated:`Sanal yazıcı ayarları güncellendi`,failedToUpdate:`Ayarlar güncellenemedi`,copyFailed:`Kopyalama başarısız — metni manuel olarak seçmeyi deneyin`,accessCodeRequired:`Lütfen önce bir erişim kodu ayarlayın`,targetPrinterRequired:`Lütfen önce bir hedef yazıcı seçin`,bindIpRequired:`Lütfen önce bir bind IP'si ayarlayın`,accessCodeEmpty:`Erişim kodu boş olamaz`,accessCodeLength:`Erişim kodu tam olarak 8 karakter olmalı`,targetCodeChangedRebind:`Erişim kodu artık yeni hedef yazıcıyla eşleşiyor. Yeni kodu almak için bu cihazı dilimleyicinizde yeniden ekleyin.`,created:`Sanal yazıcı oluşturuldu`,failedToCreate:`Sanal yazıcı oluşturulamadı`,deleted:`Sanal yazıcı silindi`,failedToDelete:`Sanal yazıcı silinemedi`},list:{title:`Sanal Yazıcılar`,add:`Ekle`,addFirst:`Sanal Yazıcı Ekle`,empty:`Yapılandırılmış sanal yazıcı yok. Başlamak için bir tane ekleyin.`},bindIp:{title:`Bind Arayüzü`,placeholder:`Arayüz seç...`,hint:`Bu sanal yazıcının bağlanacağı ağ arayüzü. Yazıcı başına benzersiz olmalıdır.`},proxy:{accessCodeHint:`Proxy modunda, dilimleyicide hedef yazıcınızın erişim kodunu kullanın. Bağlantı şeffaf olarak gerçek yazıcıya iletilir.`},addDialog:{title:`Sanal Yazıcı Ekle`,name:`Ad`,hint:`Oluşturduktan sonra erişim kodunu, hedef yazıcıyı ve diğer ayarları yapılandırabilirsiniz.`,create:`Oluştur`},deleteConfirm:{title:`Sanal Yazıcıyı Sil`,message:`"{{name}}" silmek istediğinizden emin misiniz? Bu, bu yazıcı için tüm servisleri durduracak.`}},modelViewer:{openInSlicer:`Dilimleyicide Aç`,tabs:{model:`3B Model`,gcode:`G-kod Önizleme`},notAvailable:`mevcut değil`,notSliced:`dilimlenmemiş`,plates:`Plakalar`,allPlates:`Tüm Plakalar`,plateNumber:`Plaka {{number}}`,plateCount:`{{count}} plaka`,plateCount_other:`{{count}} plaka`,objectCount:`{{count}} nesne`,objectCount_other:`{{count}} nesne`,filamentCount:`{{count}} filament`,filamentCount_other:`{{count}} filament`,eta:`ETA {{minutes}} dk`,noPreview:`Bu dosya için önizleme yok`,pagination:{pageOf:`{{total}} sayfadan {{current}} tanesi`,prev:`Önceki`,next:`Sonraki`},errors:{failedToLoad:`Dosya yüklenemedi`,noMeshes:`3MF dosyasında ağ bulunamadı`,unsupportedFormat:`Desteklenmeyen dosya formatı`}},maintenanceDescriptions:{lubricateCarbonRods:`Düzgün hareket için karbon çubuklara yağ uygula`,lubricateRails:`Düzgün hareket için lineer raylara yağ uygula`,cleanNozzle:`Tıkanmaları önlemek için hotend ve nozulu temizle`,checkBelts:`Doğru baskılar için kayış gerginliğini kontrol et`,cleanBuildPlate:`Daha iyi yapışma için baskı plakasını temizle`,checkExtruder:`Aşınma için ekstrüder dişlilerini inceleyin`,checkCooling:`Soğutma fanlarının düzgün çalıştığından emin ol`,generalInspection:`Genel yazıcı denetimi`,cleanCarbonRods:`Sürtünmeyi azaltmak için karbon çubukları temizle`,lubricateSteelRods:`Düzgün hareket için çelik çubuklara yağ uygula`,cleanSteelRods:`Sürtünmeyi azaltmak için çelik çubukları temizle`,cleanLinearRails:`Toz ve kalıntıları temizlemek için lineer rayları sil`,checkPtfeTube:`Aşınma veya hasar için PTFE tüpünü incele`,replaceHepaFilter:`Hava kalitesi için HEPA filtresini değiştir`,replaceCarbonFilter:`Aktif karbon filtresini değiştir`,lubricateLeftNozzleRail:`Sol nozul rayını yağla (H2 serisi)`},smartPlugs:{offline:`Çevrimdışı`,admin:`Yönetici`,openPlugAdminPage:`Priz yönetici sayfasını aç`,deleteSmartPlug:`Akıllı Prizi Sil`,turnOnSmartPlug:`Akıllı Prizi Aç`,turnOffSmartPlug:`Akıllı Prizi Kapat`,turnOn:`Aç`,turnOff:`Kapat`,addSmartPlug:{scanningNetwork:`Ağ taranıyor...`,chooseEntity:`Bir varlık seçin...`,connectionFailed:`Bağlantı başarısız`,searchEntities:`Varlıklarda ara...`,searchPowerSensors:`Güç sensörlerinde ara...`,searchEnergySensors:`Enerji sensörlerinde ara...`,placeholders:{plugName:`Oturma Odası Prizi`,mqttStateOnValue:`ON, true, 1`,mqttSameAsPower:`Güç konusuyla aynı veya farklı`}},linkedTo:`Bağlı:`,monitorOnly:`Yalnızca İzle`,alerts:`Uyarılar`,scheduleOn:`{{time}} Açık`,scheduleOff:`{{time}} Kapalı`,on:`Açık`,off:`Kapalı`,power:`Güç`,kwhToday:`Bugün kWh`,settings:`Ayarlar`,automationSettings:`Otomasyon Ayarları`,showInSwitchbar:`Anahtar Çubuğunda Göster`,quickAccessSidebar:`Kenar çubuğundan hızlı erişim`,enabled:`Etkin`,enableAutomation:`Bu priz için otomasyonu etkinleştir`,autoOn:`Otomatik Aç`,autoOnDescription:`Baskı başladığında aç`,autoOff:`Otomatik Kapat`,autoOffDescription:`Baskı tamamlandığında kapat (tek seferlik)`,autoOffPersistent:`Etkin Tut`,autoOffPersistentDescription:`Tek seferlik yerine baskılar arasında etkin kal`,autoOffAfterDrying:`Kurutmadan Sonra Otomatik Kapat`,autoOffAfterDryingDescription:`AMS kurutması tamamlandığında kapat`,delayAfterDryingMinutes:`Kurutma gecikmesi (dakika)`,turnOffDelayMode:`Kapatma Gecikme Modu`,time:`Süre`,temp:`Sıcaklık`,delayMinutes:`Gecikme (dakika)`,tempThreshold:`Sıcaklık eşiği (°C)`,tempThresholdDescription:`Nozul bu sıcaklığın altına soğuduğunda kapanır`,edit:`Düzenle`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz? Bu geri alınamaz.`,turnOnConfirm:`"{{name}}" açmak istediğinizden emin misiniz?`,turnOffConfirm:`"{{name}}" kapatmak istediğinizden emin misiniz? Bu, bağlı cihazın gücünü kesecek.`,failedToTurn:`"{{name}}" {{action}} başarısız`,unknown:`Bilinmiyor`,addTitle:`Akıllı Priz Ekle`,editTitle:`Akıllı Prizi Düzenle`,stopScanning:`Taramayı Durdur`,discoverTasmota:`Tasmota Cihazlarını Keşfet`,foundDevices:`{{count}} cihaz bulundu - seçmek için tıklayın:`,noDevicesFound:`Ağınızda Tasmota cihazı bulunamadı`,haNotConfigured:`Home Assistant yapılandırılmamış. Şuradan ayarlayın:`,haSettingsPath:`Ayarlar → Ağ → Home Assistant`,selectEntity:`Varlık Seç *`,ipAddress:`IP Adresi *`,nameLabel:`Ad *`,username:`Kullanıcı Adı`,password:`Parola`,authHint:`Tasmota cihazınız kimlik doğrulama gerektirmiyorsa boş bırakın`,linkToPrinter:`Yazıcıya Bağla`,noPrinter:`Yazıcı yok (yalnızca manuel kontrol)`,linkingDescription:`Bağlama, baskılar başladığında/tamamlandığında otomatik açma/kapamayı etkinleştirir`,powerAlerts:`Güç Uyarıları`,alertAbove:`Üstündeyse uyar (W)`,alertBelow:`Altındaysa uyar (W)`,alertDescription:`Güç tüketimi bu eşikleri geçtiğinde bildirim alın. O yönü devre dışı bırakmak için boş bırakın.`,dailySchedule:`Günlük Zamanlama`,turnOnAt:`Şu saatte aç`,turnOffAt:`Şu saatte kapat`,scheduleDescription:`Prizi günlük olarak bu saatlerde otomatik aç/kapat. O eylemi atlamak için boş bırakın.`,showOnPrinterCard:`Yazıcı Kartında Göster`,displayOnPrinterCard:`Yazıcı kartında düğme göster`,connectedResult:`Bağlandı!`,deviceLabel:`Cihaz: {{name}} - `,stateLabel:`Durum: {{state}}`,test:`Test`,delete:`Sil`,save:`Kaydet`,add:`Ekle`,cancel:`İptal`,failedToStartScan:`Tarama başlatılamadı`,nameRequired:`Ad gerekli`,entityRequired:`Home Assistant prizleri için varlık gerekli`,mqttTopicRequired:`Güç, enerji veya durum izleme için en az bir MQTT konusu yapılandırılmalı`,loadingEntities:`Varlıklar yükleniyor...`,loading:`Yükleniyor...`,failedToLoadEntities:`Varlıklar yüklenemedi: {{error}}`,noEntitiesMatching:`"{{search}}" ile eşleşen varlık bulunamadı`,noEntitiesAvailable:`Kullanılabilir varlık yok`,searchingEntities:`Tüm varlıklar aranıyor ({{count}} bulundu)`,showingEntities:`switch, light, input_boolean gösteriliyor ({{count}} mevcut)`,energyMonitoringOptional:`Enerji İzleme (İsteğe Bağlı)`,energyMonitoringHint:`Güç/enerji verisi sağlayan sensörleri arayın ve seçin.`,powerSensorW:`Güç Sensörü (W)`,energyTodayKwh:`Bugünkü Enerji (kWh)`,totalEnergyKwh:`Toplam Enerji (kWh)`,noMatchingSensors:`Eşleşen sensör yok`,none:`Hiçbiri`,mqttNotConfigured:`MQTT brokerı yapılandırılmamış. Şurada broker adresini ayarlayın:`,mqttSettingsPath:`Ayarlar → Ağ → MQTT Yayınlama`,mqttNotConfiguredSuffix:`(yayınlamayı etkinleştirmenize gerek yok, yalnızca broker ayrıntılarını doldurun).`,mqttMonitorOnlyDescription:`MQTT prizleri MQTT aboneliği aracılığıyla güç/enerji verisi alır. Açma/kapama kontrolü kullanılamaz - MQTT brokerınızı veya ev otomasyon sisteminizi kullanın.`,powerMonitoring:`Güç İzleme`,energyMonitoring:`Enerji İzleme`,stateMonitoring:`Durum İzleme`,optional:`isteğe bağlı`,topic:`Konu`,jsonPath:`JSON Yolu`,multiplier:`Çarpan`,onValue:`ON Değeri`,mqttPowerHint:`JSON yolu JSON yükten değer çıkarır (örn., "power_l1"). Konu ham sayısal değerler yayınlıyorsa boş bırakın. mW→W için 0.001, kW→W için 1000 çarpanı kullanın.`,mqttEnergyHint:`JSON yolu JSON yükten değer çıkarır. Ham değerler için boş bırakın. Wh→kWh için 0.001, MWh→kWh için 1000 çarpanı kullanın.`,mqttStateHint:`JSON yolu JSON yükten değer çıkarır. Ham değerler için boş bırakın. -ON değeri: "ON" anlamına gelen tam string. Otomatik algılama için boş bırakın (ON, true, 1).`,restControl:`Kontrol`,restOnUrl:`AÇ URL'si`,restOffUrl:`KAPAT URL'si`,restOnBody:`AÇ İstek Gövdesi`,restOffBody:`KAPAT İstek Gövdesi`,restMethod:`HTTP Yöntemi`,restHeaders:`Özel Başlıklar (JSON)`,restStatusUrl:`Durum URL'si`,restStatusPath:`Durum JSON Yolu`,restStatusOnValue:`ON Değeri`,restPowerUrl:`Güç URL'si`,restPowerPath:`Güç JSON Yolu`,restPowerMultiplier:`Güç Çarpanı`,restEnergyUrl:`Enerji URL'si`,restEnergyPath:`Enerji JSON Yolu`,restEnergyMultiplier:`Enerji Çarpanı`,restUrlRequired:`REST prizleri için en az bir URL (ON veya OFF) gerekli`,restHeadersHint:`örn. {"Authorization": "Bearer your-token"}`,restBodyHint:`örn. ON, {"state": "on"}`,restStatusHint:`Mevcut durumu sorgulamak için URL`,restPathHint:`örn. state veya data.power.status`,restPowerUrlHint:`Güç verisi için ayrı URL (boşsa Durum URL'sini kullanır)`,restEnergyUrlHint:`Enerji verisi için ayrı URL (boşsa Durum URL'sini kullanır)`,restEnergyHint:`Her değer kendi URL'sini kullanabilir veya Durum URL'sine geri dönebilir. Birim dönüşümü için çarpanları kullanın (örn. Wh'yi kWh'ye dönüştürmek için 0.001).`,testConnection:`Bağlantıyı Test Et`,connectionSuccess:`Bağlantı başarılı`,noSwitchesInSwitchbar:`Anahtar çubuğunda anahtar yok`,enableSwitchbarHint:`Ayarlar > Akıllı Prizler'de "Anahtar Çubuğunda Göster"i etkinleştirin`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-posta`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`},providerDescriptions:{email:`SMTP e-posta bildirimleri`,telegram:`Telegram botu üzerinden bildirimler`,discord:`Webhook üzerinden Discord kanalına gönder`,ntfy:`Ücretsiz, kendi barındırılabilir push bildirimleri`,pushover:`Basit, güvenilir push bildirimleri`,callmebot:`CallMeBot üzerinden ücretsiz WhatsApp bildirimleri`,webhook:`Herhangi bir URL'ye genel HTTP POST`,homeassistant:`Home Assistant gösterge panelinde kalıcı bildirimler`},lastSuccess:`Son: {{date}}`,error:`Hata`,printer:`Yazıcı:`,allPrinters:`Tüm yazıcılar`,sendTestNotification:`Test Bildirimi Gönder`,eventSettings:`Olay Ayarları`,enabled:`Etkin`,sendFromProvider:`Bu sağlayıcıdan bildirim gönder`,printEvents:`Baskı Olayları`,printerStatus:`Yazıcı Durumu`,amsAlarms:`AMS Alarmları`,amsHtAlarms:`AMS-HT Alarmları`,printQueue:`Baskı Kuyruğu`,start:`Başlangıç`,plateCheck:`Plaka Kontrolü`,complete:`Tamamlandı`,failed:`Başarısız`,stopped:`Durduruldu`,progress:`İlerleme`,offline:`Çevrimdışı`,lowFilament:`Az Filament`,maintenance:`Bakım`,amsHumidity:`AMS Nemi`,amsTemp:`AMS Sıcaklığı`,amsHtHumidity:`AMS-HT Nemi`,amsHtTemp:`AMS-HT Sıcaklığı`,bedCooled:`Tabla Soğudu`,firstLayer:`İlk Katman`,quiet:`Sessiz`,digest:`Özet {{time}}`,printStarted:`Baskı Başladı`,plateNotEmpty:`Plaka Boş Değil`,plateNotEmptyDescription:`Baskıdan önce nesneler algılandı`,printCompleted:`Baskı Tamamlandı`,bedCooledLabel:`Tabla Soğudu`,bedCooledDescription:`Baskıdan sonra tabla eşiğin altına soğudu`,firstLayerCompleteLabel:`İlk Katman Tamamlandı`,firstLayerCompleteDescription:`İlk katman bittiğinde anlık görüntüyle bildir`,missingSpoolAssignmentLabel:`Eksik Makara Ataması`,missingSpoolAssignmentDescription:`Baskı başladığında ve gerekli tepsilerin atanmış makarası olmadığında bildir`,printFailed:`Baskı Başarısız`,printStopped:`Baskı Durduruldu`,progressMilestones:`İlerleme Kilometre Taşları`,progressMilestonesDescription:`%25, %50, %75'te bildir`,printerOffline:`Yazıcı Çevrimdışı`,printerError:`Yazıcı Hatası`,aiFailureDetection:`AI Hata Tespiti`,aiFailureDetectionDescription:`Obico AI olası bir baskı hatası tespit ettiğinde bildir`,lowFilamentLabel:`Az Filament`,maintenanceDue:`Bakım Zamanı`,maintenanceDueDescription:`Bakım gerektiğinde bildir`,amsHumidityHigh:`AMS Nemi Yüksek`,amsHumidityHighDescription:`Normal AMS nemi eşiği aşıyor`,amsTemperatureHigh:`AMS Sıcaklığı Yüksek`,amsTemperatureHighDescription:`Normal AMS sıcaklığı eşiği aşıyor`,amsHtHumidityHigh:`AMS-HT Nemi Yüksek`,amsHtHumidityHighDescription:`AMS-HT nemi eşiği aşıyor`,amsHtTemperatureHigh:`AMS-HT Sıcaklığı Yüksek`,amsHtTemperatureHighDescription:`AMS-HT sıcaklığı eşiği aşıyor`,inventoryAlerts:`Envanter Uyarıları`,stockReorderAlert:`Yeniden Sipariş Uyarısı`,stockReorderAlertDescription:`SKU yeniden sipariş noktasına ulaştı`,stockBreakAlert:`Stok Tükenme Uyarısı`,stockBreakAlertDescription:`Yenileme gelmeden stok tükenecek`,jobAdded:`İş Eklendi`,jobAddedDescription:`İş kuyruğa eklendi`,jobAssigned:`İş Atandı`,jobAssignedDescription:`Model tabanlı iş yazıcıya atandı`,jobStarted:`İş Başladı`,jobStartedDescription:`Kuyruk işi yazdırmaya başladı`,jobWaiting:`İş Bekliyor`,jobWaitingDescription:`İş filament veya yazıcı için bekliyor`,jobSkipped:`İş Atlandı`,jobSkippedDescription:`İş atlandı (önceki başarısız oldu)`,jobFailed:`İş Başarısız`,jobFailedDescription:`İş başlatılamadı`,queueComplete:`Kuyruk Tamamlandı`,queueCompleteDescription:`Tüm kuyruk işleri bitti`,quietHours:`Sessiz Saatler`,noNotificationsDuring:`Bu saatler arasında bildirim yok`,editProviderToChangeQuietHours:`Sessiz saatleri değiştirmek için sağlayıcıyı düzenleyin`,dailyDigest:`Günlük Özet`,batchNotifications:`Bildirimleri tek bir günlük özette topla`,sendAt:`{{time}}'de gönder`,editProviderToChangeDigestTime:`Özet saatini değiştirmek için sağlayıcıyı düzenleyin`,edit:`Düzenle`,deleteProvider:`Bildirim Sağlayıcısını Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz? Bu geri alınamaz.`,delete:`Sil`,addTitle:`Bildirim Sağlayıcısı Ekle`,editTitle:`Bildirim Sağlayıcısını Düzenle`,nameLabel:`Ad *`,namePlaceholder:`Bildirimlerim`,providerTypeLabel:`Sağlayıcı Türü *`,configuration:`Yapılandırma`,testConfiguration:`Yapılandırmayı Test Et`,printerFilter:`Yazıcı Filtresi`,onlyFromPrinter:`Yalnızca bu yazıcının olayları için bildirim gönder`,quietHoursDnd:`Sessiz Saatler (Rahatsız Etme)`,quietStart:`Başlangıç`,quietEnd:`Bitiş`,dailyDigestLabel:`Günlük Özet`,sendDigestAt:`Özeti şu saatte gönder`,digestCollected:`Olaylar toplanacak ve bu saatte tek bir özet olarak gönderilecek`,notificationEvents:`Bildirim Olayları`,progressPercent:`(%25, %50, %75)`,bedCooledAfterPrint:`(baskı tamamlandıktan sonra)`,eventPriority:{sectionTitle:`ntfy Önceliği`,helpNtfy:`Her etkin olay için bir öncelik seçin. ntfy uyarıları kademelendirmek için bunları kullanır (ses, görünürlük, push davranışı). Burada ayarlanmamış seviyeler ntfy sunucu varsayılanını kullanır.`,min:`Min`,low:`Düşük`,default:`Varsayılan`,high:`Yüksek`,urgent:`Acil`},cancel:`İptal`,save:`Kaydet`,add:`Ekle`,nameRequired:`Ad gerekli`,fieldRequired:`{{field}} gerekli`,phoneNumber:`Telefon Numarası`,apiKey:`API Anahtarı`,serverUrl:`Sunucu URL`,topic:`Konu`,authToken:`Yetkilendirme Belirteci`,userKey:`Kullanıcı Anahtarı`,appToken:`Uygulama Belirteci`,priority:`Öncelik`,botToken:`Bot Belirteci`,chatId:`Sohbet ID`,smtpServer:`SMTP Sunucusu`,smtpPort:`SMTP Portu`,security:`Güvenlik`,authentication:`Kimlik Doğrulama`,username:`Kullanıcı Adı`,password:`Parola`,fromEmail:`Gönderen E-posta`,toEmail:`Alıcı E-posta`,webhookUrl:`Webhook URL`,payloadFormat:`Yük Formatı`,authorization:`Yetkilendirme`,titleFieldName:`Başlık Alanı Adı`,messageFieldName:`Mesaj Alanı Adı`,editTemplate:`Şablonu Düzenle: {{name}}`,titleLabel:`Başlık`,bodyLabel:`Gövde`,titlePlaceholder:`Bildirim başlığı...`,bodyPlaceholder:`Bildirim gövdesi...`,availableVariables:`Kullanılabilir Değişkenler`,clickToInsert:`Gövdede imleç konumuna eklemek için tıklayın`,livePreview:`Canlı Önizleme`,hide:`Gizle`,show:`Göster`,loadingPreview:`Önizleme yükleniyor...`,enterTemplateContent:`Önizlemeyi görmek için şablon içeriğini girin`,titlePreview:`Başlık:`,bodyPreview:`Gövde:`,resetToDefault:`Varsayılana Sıfırla`,titleRequired:`Başlık gerekli`,bodyRequired:`Gövde gerekli`,notificationLog:`Bildirim Günlüğü`,showFailedOnly:`Yalnızca başarısız`,last24Hours:`Son 24 saat`,last7Days:`Son 7 gün`,last30Days:`Son 30 gün`,last90Days:`Son 90 gün`,justNow:`Az önce`,noFailedNotifications:`Başarısız bildirim yok`,noNotificationsLogged:`Kaydedilen bildirim yok`,unknownProvider:`Bilinmeyen Sağlayıcı`,logTitle:`Başlık`,logMessage:`Mesaj`,logError:`Hata`,logProvider:`Sağlayıcı: {{type}}`,logTime:`Saat: {{time}}`,refresh:`Yenile`,clearOld:`Eskileri Temizle`,statsSummary:`Son {{days}} gün:`,statsNotifications:`bildirim`,statsSent:`{{count}} gönderildi`,statsFailed:`{{count}} başarısız`,eventTypes:{print_start:`Baskı Başladı`,print_complete:`Baskı Tamamlandı`,print_failed:`Baskı Başarısız`,print_stopped:`Baskı Durduruldu`,print_progress:`İlerleme`,printer_offline:`Yazıcı Çevrimdışı`,printer_error:`Yazıcı Hatası`,filament_low:`Az Filament`,maintenance_due:`Bakım Zamanı`,test:`Test`},userEmail:{title:`Bildirimler`,emailNotifications:`E-posta Bildirimleri`,emailNotificationsDesc:`Kendi baskı işleriniz için e-posta bildirimleri alın. E-postalar Gelişmiş Kimlik Doğrulamada yapılandırılan sistem SMTP ayarları kullanılarak gönderilir.`,sendingTo:`Bildirimler şuraya gönderilecek`,noEmailWarning:`Hesabınızın e-posta adresi yok. Eklemek için bir yöneticiyle iletişime geçin.`,printJobNotifications:`Baskı İşi Bildirimleri`,printJobNotificationsDesc:`Gönderdiğiniz baskı işleri için hangi olayların e-posta bildirimlerini tetikleyeceğini seçin.`,printJobStarts:`Baskı İşi Başlar`,printJobStartsDesc:`Baskı işiniz başladığında bildirim alın.`,printJobFinishes:`Baskı İşi Biter`,printJobFinishesDesc:`Baskı işiniz başarıyla tamamlandığında bildirim alın.`,printErrors:`Baskı Hataları`,printErrorsDesc:`Baskı işiniz başarısız olduğunda veya bir hatayla karşılaştığında bildirim alın.`,printJobStops:`Baskı İşi Durur`,printJobStopsDesc:`Baskı işiniz iptal edildiğinde veya durdurulduğunda bildirim alın.`,saveSuccess:`Bildirim tercihleri kaydedildi.`,saveError:`Bildirim tercihleri kaydedilemedi.`}},richTextEditor:{bold:`Kalın`,italic:`İtalik`,underline:`Altı Çizili`,bulletList:`Madde İşaretli Liste`,numberedList:`Numaralı Liste`,alignLeft:`Sola Hizala`,alignCenter:`Ortaya Hizala`,alignRight:`Sağa Hizala`,addLink:`Bağlantı Ekle`,removeLink:`Bağlantıyı Kaldır`},externalLinks:{title:`Kenar çubuğu bağlantıları`,sidebarLayout:`Kenar çubuğu`,sidebarLayoutDescription:`Yerleşik sayfaları gösterin veya gizleyin, harici bağlantılar ekleyin ve kenar çubuğu gezinmesini yeniden sıralamak için öğeleri sürükleyin.`,systemPages:`Bambuddy sayfaları`,externalLinks:`Harici bağlantılar`,visibleInSidebar:`Kenar çubuğunda görünür`,hiddenFromSidebar:`Kenar çubuğunda gizli`,requiredInSidebar:`Kenar çubuğunda gerekli`,hidePage:`Sayfayı gizle`,showPage:`Sayfayı göster`,settingsCannotBeHidden:`Ayarlar gizlenemez`,noLinksConfigured:`Yapılandırılmış harici bağlantı yok`,deleteLink:`Bağlantıyı Sil`,removeCustomIcon:`Özel simgeyi kaldır`,openInNewTab:`Yeni sekmede aç`,placeholders:{linkName:`Bağlantım`}},keyboardShortcuts:{title:`Klavye Kısayolları`,navigation:`Navigasyon`,archivesSection:`Arşivler`,kProfilesSection:`K-Profilleri`,generalSection:`Genel`,shortcuts:{goToPrinters:`Yazıcılara Git`,goToArchives:`Arşivlere Git`,goToQueue:`Kuyruğa Git`,goToStats:`İstatistiklere Git`,goToProfiles:`Bulut Profillerine Git`,goToSettings:`Ayarlara Git`,focusSearch:`Aramaya odaklan`,openUploadModal:`Yükleme modalini aç`,clearSelection:`Seçimi temizle / odağı kaldır`,contextMenu:`Kartlarda bağlam menüsü`,refreshProfiles:`Profilleri yenile`,newProfile:`Yeni profil`,exitSelectionMode:`Seçim modundan çık`,showHelp:`Bu yardımı göster`},footer:`Kapatmak için Esc'ye basın veya dışarı tıklayın`},notificationLog:{title:`Bildirim Günlüğü`,events:{printStarted:`Baskı Başladı`,printComplete:`Baskı Tamamlandı`,printFailed:`Baskı Başarısız`,printStopped:`Baskı Durduruldu`,progress:`İlerleme`,printerOffline:`Yazıcı Çevrimdışı`,printerError:`Yazıcı Hatası`,lowFilament:`Az Filament`,maintenanceDue:`Bakım Zamanı`,test:`Test`},timeAgo:{justNow:`Az önce`,minutesAgo:`{{minutes}}dk önce`,hoursAgo:`{{hours}}sa önce`}},restoreBackup:{title:`Yedeği Geri Yükle`,restoring:`Geri yükleniyor...`,restoreComplete:`Geri Yükleme Tamamlandı`,restoreFailed:`Geri Yükleme Başarısız`,importSettings:`Ayarları bir yedek dosyasından içe aktar`,pleaseWait:`Verileriniz geri yüklenirken lütfen bekleyin`,clickToSelect:`Yedek dosyası seçmek için tıklayın (.json veya .zip)`,howDuplicateHandling:`Yinelenen yönetiminin nasıl çalıştığı:`,categories:{printers:`Yazıcılar`,smartPlugs:`Akıllı Prizler`,notificationProviders:`Bildirim Sağlayıcıları`,filaments:`Filamentler`,archives:`Arşivler`,pendingUploads:`Bekleyen Yüklemeler`,settingsTemplates:`Ayarlar ve Şablonlar`},matchingInfo:{printers:`seri numarasına göre eşleşti`,smartPlugs:`IP adresine göre eşleşti`,notificationProviders:`ada göre eşleşti`,filaments:`ad + tür + markaya göre eşleşti`,archives:`içerik hash'ine göre eşleşti`,pendingUploads:`dosya adına göre eşleşti`,settingsTemplates:`her zaman üzerine yazılır`},replaceExisting:`Mevcut veriyi değiştir`,keepExisting:`Mevcut veriyi koru`,replaceDescription:`Zaten mevcut olan öğeleri yedek verisiyle üzerine yaz`,keepDescription:`Yalnızca zaten mevcut olmayan öğeleri geri yükle`,caution:`Dikkat:`,cautionText:`Üzerine yazma, mevcut yapılandırmalarınızı yedek verisiyle değiştirecek. Güvenlik için yazıcı erişim kodları asla üzerine yazılmaz.`,itemsRestored:`Geri Yüklenen Öğeler`,itemsSkipped:`Atlanan Öğeler`,restored:`Geri yüklendi`,skipped:`Atlandı (zaten mevcut)`,filesLabel:`Dosyalar (3MF, küçük resimler, vb.)`,newApiKeysGenerated:`Yeni API Anahtarları Oluşturuldu`,newApiKeysWarning:`Bu anahtarlar yalnızca bir kez gösterilir. Şimdi kopyalayın!`,processingBackup:`Yedek dosyası işleniyor...`,noDataFound:`Yedek dosyasında geri yüklenecek veri bulunamadı.`,failedToRestore:`Yedek geri yüklenemedi. Lütfen dosya formatını kontrol edin.`},backupExport:{title:`Yedeği Dışa Aktar`,selectData:`Dahil edilecek veriyi seçin`,selectAll:`Tümünü Seç`,selectNone:`Hiçbirini Seçme`,categoryDescriptions:{settings:`Dil, tema, güncelleme tercihleri`,notifications:`ntfy, Pushover, Discord, vb.`,templates:`Özel mesaj şablonları`,smartPlugs:`Tasmota priz yapılandırmaları`,externalLinks:`Harici servislere kenar çubuğu bağlantıları`,printers:`Yazıcı bilgisi (erişim kodları hariç)`,plateDetection:`Boş plaka referans görüntüleri`,filaments:`Filament türleri ve maliyetleri`,maintenance:`Özel bakım programları`,archives:`Tüm baskı verileri + dosyalar (3MF, küçük resimler, fotoğraflar)`,projects:`Projeler, BOM öğeleri ve ekler`,pendingUploads:`İnceleme bekleyen sanal yazıcı yüklemeleri`,apiKeys:`Webhook API anahtarları (içe aktarımda yeni anahtarlar oluşturulur)`},requiresPrinters:`Yazıcıların seçili olması gerekir`,zipFileWarning:`ZIP dosyası oluşturulacak.`,zipFileDescription:`Tüm 3MF dosyalarını, küçük resimleri, zaman atlamalı videoları ve fotoğrafları içerir. Bu biraz zaman alabilir ve büyük bir dosya oluşturabilir.`,includeAccessCodes:`Erişim Kodlarını Dahil Et`,includeAccessCodesDescription:`Başka bir makineye aktarmak için`,includeAccessCodesWarning:`Erişim kodları düz metin olarak dahil edilecek. Bu yedek dosyasını güvende tutun!`,categoriesSelected:`{{selectedCount}} kategori seçildi`},pendingUploads:{placeholders:{notes:`Bu baskı hakkında notlar ekleyin...`},discardUpload:`Yüklemeyi At`,archiveAllUploads:`Tüm Yüklemeleri Arşivle`,discardAllUploads:`Tüm Yüklemeleri At`,archive:`Arşivle`,timeAgo:{justNow:`Az önce`,minutesAgo:`{{minutes}}dk önce`,hoursAgo:`{{hours}}sa önce`,daysAgo:`{{days}}g önce`}},apiBrowser:{placeholders:{requestBody:`JSON istek gövdesi...`,searchEndpoints:`Uç noktalarda ara...`}},configureAmsSlot:{title:`AMS Yuvasını Yapılandır`,slotConfigured:`Yuva Yapılandırıldı!`,configuringSlot:`Yuva yapılandırılıyor:`,slotLabel:`{{ams}} Yuva {{slot}}`,searchPresets:`Ön ayarlarda ara...`,colorPlaceholder:`Renk adı veya hex (örn., kahverengi, FF8800)`,clearCustomColor:`Özel rengi temizle`,noCloudPresets:`Bulut ön ayarı yok. Senkronize etmek için Bambu Cloud'a giriş yapın.`,noPresetsAvailable:`Kullanılabilir ön ayar yok. Bambu Cloud'a giriş yapın veya yerel profilleri içe aktarın.`,noMatchingPresets:`Eşleşen ön ayar bulunamadı.`,custom:`Özel`,builtin:`Yerleşik`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Ayarlar yazıcıya gönderildi`,filamentProfile:`Filament Profili`,kProfileLabel:`K Profili (Basınç İlerlemesi)`,filteringFor:`Şu için filtreleniyor: {{material}}`,noKProfile:`K profili yok (varsayılan 0.020 kullan)`,noMatchingKProfiles:`Eşleşen K profili bulunamadı. Varsayılan K=0.020 kullanılacak.`,selectFilamentFirst:`Önce bir filament profili seçin`,kFromCalibration:`Yazıcı kalibrasyonundan K={{value}}`,customColorLabel:`Özel Renk (isteğe bağlı)`,presetColors:`{{name}} renkleri:`,showLessColors:`Daha az renk göster`,showMoreColors:`Daha fazla renk göster`,clear:`Temizle`,hexLabel:`Hex: #{{hex}}`,resetting:`Sıfırlanıyor...`,resetSlot:`Yuvayı Sıfırla`,cancel:`İptal`,configuring:`Yapılandırılıyor...`,configureSlot:`Yuvayı Yapılandır`},githubBackup:{title:`Git Yedekleme`,history:`Geçmiş`,downloadBackup:`Yedeği İndir`,restoreBackup:`Yedeği Geri Yükle`,noBackupsYet:`Henüz yedek yok`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Etiketlerde ara...`,renameTag:`Etiketi yeniden adlandır`,deleteTag:`Etiketi sil`},notificationTemplates:{placeholders:{title:`Bildirim başlığı...`,body:`Bildirim gövdesi...`}},batchTag:{placeholders:{newTag:`Yeni etiket girin...`}},photoGallery:{deletePhoto:`Fotoğrafı Sil`},filamentHoverCard:{copySpoolUuid:`Makara UUID'sini kopyala`},kProfilesView:{hasNote:`Notu var`,copyProfile:`Profili kopyala`},layout:{openMenu:`Menüyü aç`,noPermissionSystemInfo:`Sistem bilgisini görüntüleme izniniz yok`},dashboard:{dragToReorder:`Yeniden sıralamak için sürükleyin`,hideWidget:`Widget'ı gizle`},notificationProviderCard:{deleteNotificationProvider:`Bildirim Sağlayıcısını Sil`},fileManagerModal:{closeFileManager:`Dosya yöneticisini kapat`,sortFiles:`Dosyaları sırala`,goToParentFolder:`Üst klasöre git`,threeView:`3B Görünüm`},embeddedCameraViewer:{refreshStream:`Akışı yenile`,close:`Kapat`,zoomOut:`Uzaklaştır`,resetZoom:`Yakınlaştırmayı sıfırla`,zoomIn:`Yakınlaştır`,dragToResize:`Yeniden boyutlandırmak için sürükleyin`},timelapseViewer:{skipBack5s:`5 sn geri al`,skipForward5s:`5 sn ileri al`},notificationProviders:{descriptions:{email:`SMTP e-posta bildirimleri`,telegram:`Telegram botu üzerinden bildirimler`,discord:`Webhook üzerinden Discord kanalına gönder`,ntfy:`Ücretsiz, kendi barındırılabilir push bildirimleri`,pushover:`Basit, güvenilir push bildirimleri`,callmebot:`CallMeBot üzerinden ücretsiz WhatsApp bildirimleri`,webhook:`Herhangi bir URL'ye genel HTTP POST`}},logViewer:{searchPlaceholder:`Mesaj veya günlükçü adı ara...`,noLogEntries:`Günlük kaydı bulunamadı`},switchbarPopover:{noSwitchesInSwitchbar:`Anahtar çubuğunda anahtar yok`},projectPageModal:{placeholders:{title:`Başlık`,designer:`Tasarımcı`,license:`Lisans`,description:`Açıklama girin...`,profileTitle:`Profil Başlığı`,profileDescription:`Profil açıklaması...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Bekliyor`,justNow:`Az önce`,now:`Şimdi`,minsAgo:`{{count}}dk önce`,inMins:`{{count}}dk sonra`,hoursAgo:`{{count}}sa önce`,inHours:`{{count}}sa sonra`,daysAgo:`{{count}}g önce`,inDays:`{{count}}g sonra`},spoolbuddy:{nav:{dashboard:`Gösterge Paneli`,ams:`AMS`,inventory:`Envanter`,writeTag:`Yaz`,settings:`Ayarlar`},status:{nfcReady:`NFC Hazır`,nfcOff:`NFC Kapalı`,offline:`Çevrimdışı`,online:`Çevrimiçi`,noPrinters:`Yazıcı yok`,deviceOffline:`Cihaz Çevrimdışı`,waitingConnection:`Cihaz bağlantısı bekleniyor...`,systemReady:`Sistem Hazır`,status:`Durum`},dashboard:{readyToScan:`Taramaya hazır`,idleMessage:`Tanımlamak için bir makarayı tartıya yerleştirin`,nfcHint:`NFC etiketi otomatik olarak okunacak`,device:`Cihaz`,syncWeight:`Ağırlığı Senkronize Et`,weightSynced:`Senkronize edildi!`,unknownTag:`Bilinmeyen Etiket`,newTag:`Yeni Etiket Algılandı`,onScale:`tartıda`,linkSpool:`Makaraya Bağla`,linkTagTitle:`Etiketi Makaraya Bağla`,linkTag:`Etiketi Bağla`,selectSpool:`Bu etiketi bağlamak için bir makara seçin:`,noUntagged:`Etiketsiz makara bulunamadı`,tagDetected:`Etiket algılandı`,noTag:`Etiket yok`,tagId:`Etiket`,grossWeight:`Brüt ağırlık`,spoolSize:`Makara boyutu`,close:`Kapat`,currentSpool:`Mevcut Makara`,plateReady:`Plaka hazır: {{name}}`,plateReadyLabel:`Temizlenmeye hazır plakalar`,plateClearAction:`Temizle`,plateClearedToast:`Plaka temizlendi olarak işaretlendi`,plateClearFailed:`Plaka temizlendi olarak işaretlenemedi`},modal:{spoolDetected:`Makara Algılandı`,assignToAms:`AMS'e Ata`,syncWeight:`Ağırlığı Senkronize Et`,weightSynced:`Senkronize edildi!`,syncing:`Senkronize ediliyor...`,newTagDetected:`Yeni Etiket Algılandı`,addToInventory:`Envantere Ekle`,assignToAmsTitle:`AMS'e Ata`,selectSlot:`Bir yuva seçin`,assign:`Ata`,assigning:`Atanıyor...`,assignSuccess:`Atandı!`,assignPendingInsert:`Atandı. Makarayı yerleştirdiğinizde yuva yapılandırılacak.`,assignError:`Makara atanamadı. Lütfen tekrar deneyin.`,noPrinterSelected:`Bir yazıcı seçin...`,noAmsDetected:`Bu yazıcıda AMS algılanmadı`,slot:`Yuva`},weight:{noReading:`Okuma yok`,stable:`Kararlı`,measuring:`Ölçülüyor...`,tare:`Dara`,calibrate:`Kalibre Et`},spool:{remaining:`Kalan`,material:`Malzeme`,brand:`Marka`,color:`Renk`,coreWeight:`Çekirdek`,labelWeight:`Etiket`,scaleWeight:`Tartı`,netWeight:`Net`,lastUsed:`Son kullanım`},ams:{noData:`AMS algılanmadı`,connectAms:`Filament yuvalarını görmek için bir AMS bağlayın`,noPrinter:`Yazıcı seçilmedi`,selectPrinter:`Üst çubuktan bir yazıcı seçin`,printerDisconnected:`Yazıcı bağlantısı kesildi`,humidity:`Nem`,level:`Seviye`,active:`Aktif`,slot:`Yuva`,empty:`Boş`},inventory:{search:`Makaralarda ara...`,empty:`Envanterde makara yok`,noResults:`Eşleşen makara yok`,spools:`makara`,addSpool:`Makara Ekle`},settings:{tabDevice:`Cihaz`,tabDisplay:`Görüntü`,tabScale:`Tartı`,tabUpdates:`Güncellemeler`,nfcReader:`NFC Okuyucu`,type:`Tür`,connection:`Bağlantı`,notConnected:`N/A`,deviceInfo:`Cihaz Bilgisi`,hostname:`Ana Bilgisayar`,uptime:`Çalışma Süresi`,systemConfig:`Arka Uç ve Kimlik Doğrulama`,backendUrl:`Bambuddy Arka Uç URL'si`,apiToken:`API Belirteci`,apiTokenPlaceholder:`API belirtecini girin`,saveConfig:`Yapılandırmayı Kaydet`,systemQueued:`Yapılandırma kuyruğa alındı.`,nfcDiagnostic:`NFC Tanılaması`,scaleDiagnostic:`Tartı Tanılaması`,readTagDiagnostic:`Etiket Okuma Tanılaması`,testNfc:`Okuyucuyu test et`,testScale:`Doğruluğu test et`,testReadTag:`Etiket oku`,systemFieldsRequired:`Arka uç URL'si gerekli.`,brightness:`Parlaklık`,saved:`Kaydedildi`,noBacklight:`DSI arka ışık algılanmadı. Parlaklık kontrolü DSI ekran gerektirir.`,screenBlank:`Ekran Kapanma Zaman Aşımı`,screenBlankDesc:`Hareketsizlik sonrası ekran kapanır. Uyandırmak için dokunun.`,displayNote:`Parlaklık bir yazılım filtresi olarak uygulanır.`,scaleCalibration:`Tartı Kalibrasyonu`,currentWeight:`Mevcut ağırlık`,tareOffset:`Dara`,calFactor:`Faktör`,knownWeight:`Bilinen ağırlık`,calStep1:`Tartıdan tüm öğeleri kaldırın ve Sıfır Ayarla'ya basın.`,calStep2:`Bilinen ağırlığı tartıya yerleştirin.`,setZero:`Sıfır Ayarla`,calibrateNow:`Kalibre Et`,calibrated:`Kalibre edildi`,tareSet:`Dara komutu gönderildi. Cihaz bekleniyor...`,tareComplete:`Dara tamam!`,tareTimedOut:`Dara zaman aşımına uğradı — SpoolBuddy daemon çalışıyor mu?`,tareFailed:`Dara komutu gönderilemedi`,zeroSet:`Sıfır noktası ayarlandı. Bilinen ağırlığı tartıya yerleştirin.`,calibrationDone:`Kalibrasyon tamamlandı!`,calibrationFailed:`Kalibrasyon başarısız`,lastCalibrated:`Son kalibrasyon`,stable:`Kararlı`,settling:`Sabitleniyor...`,firmware:`Firmware`,scale:`Tartı`,noDevice:`SpoolBuddy cihazı bulunamadı`,daemonVersion:`Daemon Sürümü`,currentVersion:`Mevcut`,versionPending:`Daemon bekleniyor...`,checking:`Kontrol ediliyor...`,checkUpdates:`Güncellemeleri Kontrol Et`,updateAvailable:`Güncelleme mevcut`,updateInstructions:`SSH üzerinden güncelle: yükseltmek için SpoolBuddy yükleme betiğini çalıştırın.`,upToDate:`Güncel`,includeBeta:`Beta sürümleri dahil et`},writeTag:{tabExisting:`Mevcut Makara`,tabNew:`Yeni Makara`,tabReplace:`Etiketi Değiştir`,searchPlaceholder:`Malzeme, renk, marka ile ara...`,noUntaggedSpools:`Etiketsiz makara yok`,noTaggedSpools:`Etiketli makara yok`,selectSpool:`Bir makara seçin, ardından okuyucuya boş bir NTAG yerleştirin`,placeTag:`Okuyucuya bir NTAG yerleştirin`,tagReady:`Etiket algılandı — yazmaya hazır`,writeTag:`Etiketi Yaz`,replaceTag:`Etiketi Değiştir`,writing:`Etiket yazılıyor...`,waiting:`SpoolBuddy bekleniyor...`,writeSuccess:`Etiket başarıyla yazıldı!`,writeFailed:`Yazma başarısız`,queueFailed:`Yazma komutu kuyruğa alınamadı`,tryAgain:`Tekrar Dene`,cancel:`İptal`,replaceWarning:`Eski etiket bağlantısı kaldırılacak. Yeni etiket yerini alacak.`,deviceOffline:`SpoolBuddy çevrimdışı`,material:`Malzeme`,colorName:`Renk Adı`,color:`Renk`,brand:`Marka`,weight:`Ağırlık (g)`,createSpool:`Makara Oluştur`,creating:`Oluşturuluyor...`,spoolCreated:`Makara oluşturuldu! Yazmaya hazır.`,createFailed:`Makara oluşturulamadı`,incompleteDataWarning:`Etiket eksik Spoolman verisiyle yazıldı`},quickMenu:{printerPower:`Yazıcı Gücü`,systemControls:`Sistem`,restartDaemon:`Daemon'u Yeniden Başlat`,restartBrowser:`Tarayıcıyı Yeniden Başlat`,reboot:`Yeniden Başlat`,shutdown:`Kapat`,swipeToClose:`Kapatmak için aşağı kaydır`,confirmTitle:`Onayla`,confirmShutdown:`SpoolBuddy'yi kapatmak istediğinizden emin misiniz? Tekrar açmak için fiziksel erişime ihtiyacınız olacak.`,confirmReboot:`SpoolBuddy'yi yeniden başlatmak istediğinizden emin misiniz?`,confirmRestartDaemon:`SpoolBuddy daemon yeniden başlatılsın mı? NFC ve tartı geçici olarak kullanılamayacak.`,confirmRestartBrowser:`Kiosk tarayıcısı yeniden başlatılsın mı? Ekran kısa bir süre kararacak.`,confirm:`Onayla`,confirmPlugOn:`{{name}} açılsın mı?`,confirmPlugOff:`{{name}} kapatılsın mı?`,turnOn:`Aç`,turnOff:`Kapat`}},diagnostic:{modalTitle:`Bağlantı tanılaması — {{name}}`,running:`Tanılama çalışıyor...`,runningElapsed:`Tanılama çalışıyor... ({{elapsed}}s)`,waitingForReportHint:`Yazıcının durum raporu yayınlamasını bekliyor — bu işlem en fazla {{max}} saniye sürebilir.`,runFailed:`Tanılama çalıştırılamadı: {{error}}`,retry:`Tekrar çalıştır`,runButton:`Tanılamayı çalıştır`,sectionTitle:`Bağlantı Tanılaması`,sectionDescription:`Bir yazıcının neden bağlanmadığını veya yazdırmadığını kontrol edin — port erişilebilirliği, LAN geliştirici modu, Docker ağ modu ve kimlik bilgileri.`,noPrinters:`Yapılandırılmış yazıcı yok.`,overall:{ok:`Sorun bulunamadı — yazıcı bağlantısı sağlıklı görünüyor.`,warnings:`Yazıcı çalışmalı, ancak bazı şeyler dikkat gerektiriyor.`,problems:`Yazıcının neden bağlanmadığını veya yazdırmadığını açıklayan sorunlar bulundu.`},check:{port_mqtt:{title:`Kontrol portu (MQTT 8883)`,pass:`Erişilebilir — yazıcı kontrol bağlantılarını kabul ediyor.`,fail:`Port 8883 erişilemez. Yazıcı kapalı, farklı bir IP adresinde veya bir güvenlik duvarı engelliyor. Yazıcı IP'sini ve hiçbir şeyin port 8883'ü engellemediğini doğrulayın.`},port_ftps:{title:`Dosya aktarım portu (FTPS 990)`,pass:`Erişilebilir — baskı dosyaları gönderme çalışacak.`,warn:`Port 990 erişilemez. İzleme yine çalışabilir, ancak yazıcıya baskı gönderme başarısız olacak. Port 990'ın engellenmediğinden emin olun.`},external_storage:{title:`Gönderilen dosyaları harici depolamada sakla (kurulum adımı 4)`,pass:`Yazıcı bu seçeneğin açık olduğunu bildiriyor — gönderilen dosyalar SD kartta saklanacak ve arşivler küçük resim ve dilimleyici meta verileri içerecek.`,fail:`Yazıcı bu seçeneğin kapalı olduğunu bildiriyor. "Gönderilen dosyaları harici depolamada sakla" seçeneğini etkinleştirin — yeni donanım yazılımlarında (P2S 01.02 / Bambu Studio 2.6+) düğme yazıcının Baskı Ayarları'nda; eski sürümlerde Bambu Studio / OrcaSlicer'in Cihaz sekmesindedir. Bu seçenek olmadan, arşivlenen her baskıda küçük resim ve dilimleyici meta verisi olmayacak.`,skip:`Kontrol edilmedi — etkin bir MQTT bağlantısı gerekli. Bu ayarın yalnızca dilimleyicide bulunduğu eski dilimleyicilerde yazıcı bunu bildirmez, bu nedenle seçenek kapalı olsa bile bu kontrol geçer — kurulum adımı 4'ü manuel olarak doğrulayın.`},port_rtsps:{title:`Kamera portu (RTSPS 322)`,pass:`Erişilebilir — kamera akışı çalışacak.`,warn:`Port 322 erişilemez. Canlı kamera görünümü çalışmayacak. Bu, baskıyı etkilemez.`},network_mode:{title:`Docker ağ modu`,pass:`Ana bilgisayar ağ modunda çalışıyor.`,warn:`Bambuddy, Docker köprü ağı kullanılarak çalışıyor. Yazıcı keşfi ve Sanal Yazıcı, ana bilgisayar ağ modu gerektirir — konteyneri "network_mode: host" ile yeniden oluşturun.`,skip:`Docker'da çalışmıyor — uygulanamaz.`},subnet:{title:`Ağ alt ağı`,pass:`Yazıcı ve Bambuddy aynı alt ağda.`,warn:`Yazıcı ({{printer_ip}}) ve Bambuddy ({{host_ip}}) farklı alt ağlarda. Alt ağlar arasında yönlendirme yapılandırılmazsa birbirlerine erişemeyebilirler.`,skip:`Alt ağ belirlenemedi — atlandı.`},mqtt_auth:{title:`Yazıcı kimlik bilgileri`,pass:`Yazıcı bağlantıyı kabul etti.`,fail:`Yazıcı erişilebilir ancak bağlantıyı reddetti. Büyük olasılıkla erişim kodu veya seri numarası yanlış. Erişim kodu, Geliştirici Modu her açılıp kapatıldığında değişir — yazıcı ekranından yeniden kopyalayın.`,skip:`Kontrol edilmedi — yazıcıya erişilemedi.`},developer_mode:{title:`LAN Geliştirici Modu`,pass:`Geliştirici Modu etkin.`,fail:`Yazıcıda Geliştirici Modu KAPALI. Yazıcının LAN ayarlarında etkinleştirin — ve OK ile onaylayın. Bu olmadan baskılar başlamayacak.`,skip:`Kontrol edilemedi — yazıcıya canlı bir bağlantı gerektirir.`},printer_publishing:{title:`Yazıcı durum yayını yapıyor`,pass:`Yazıcı durum güncellemelerini yayınlıyor — AMS, filamentler ve K profilleri dilimleyiciye doğru şekilde yansıtılacak.`,fail:`MQTT aracısı bağlantıyı kabul etti, ancak yazıcı hiç durum raporu yayınlamadı. Bu neredeyse her zaman yanlış ya da büyük/küçük harf hatalı bir seri numarasından kaynaklanır — device//report konusu büyük/küçük harfe duyarlıdır. Yazıcı ayarlarındaki seri numarasını cihazın ekranındaki ile karşılaştırarak doğrulayın.`,skip:`Kontrol edilemedi — yazıcıya canlı bir bağlantı gerektirir.`}}},systemHealth:{sectionTitle:`Sistem Sağlığı`,sectionDescription:`Bir destek talebine dönüşmeden önce genellikle kendi başınıza düzeltebileceğiniz bilinen sorunlar için son günlükleri tarar.`,rescan:`Yeniden tara`,clean:`Son {{times}} günlük kaydında bilinen sorun bulunamadı.`,logUnavailable:`Dosya günlüğü devre dışı, bu nedenle günlükler taranamıyor. Bu kontrolü kullanmak için dosya günlüğünü etkinleştirin.`,learnMore:`Nasıl düzeltilir`,fixLabel:`Düzeltme:`,occurrences:`{{times}}× görüldü — son {{lastSeen}}'de`,category:{layer8:`Bunu düzeltebilirsiniz`,environment:`Ortam`,bug:`Lütfen bunu bildirin`},signature:{"ftp-auth-rejected":{name:`Yazıcı erişim kodunu reddetti`,cause:`Yazıcı dosya aktarım girişini reddetti. Erişim kodu yanlış veya Geliştirici Modu açılıp kapatıldıktan sonra değişti.`,fix:`Erişim kodunu yazıcı ekranından (LAN ayarları) yeniden kopyalayın ve Bambuddy'deki yazıcının ayarlarında güncelleyin.`},"ftp-connection-timeout":{name:`Dosya aktarım bağlantısı zaman aşımına uğradı`,cause:`Bambuddy yazıcının dosya aktarım portuna (FTPS 990) erişemedi. Port engellendi veya yazıcı kapalı ya da başka bir alt ağda.`,fix:`Bambuddy ile yazıcı arasında hiçbir şeyin port 990'ı engellemediğinden ve her ikisinin de aynı ağda olduğundan emin olun.`},"ftp-ssl-error":{name:`Güvenli dosya aktarım el sıkışması başarısız`,cause:`Yazıcının dosya aktarım sunucusuyla TLS el sıkışması başarısız oldu. Bu genellikle bir güvenlik duvarı veya eski yazıcı firmware'idir.`,fix:`Yazıcı firmware'ini güncelleyin ve port 990'daki bağlantıyı hiçbir güvenlik duvarı veya proxy'nin engellemediğini kontrol edin.`},"mqtt-connection-flapping":{name:`Yazıcı bağlantısı sürekli düşüyor`,cause:`Kontrol bağlantısı (MQTT 8883) tekrar tekrar bağlantısı kesiliyor ve yeniden bağlanıyor — genellikle zayıf bir ağ yolu veya kısmen engellenmiş bir port.`,fix:`Yazıcıdaki Wi-Fi sinyalini kontrol edin, kablolu bağlantı tercih edin ve port 8883'ün güvenilir bir şekilde erişilebilir olduğundan emin olun.`},"camera-connection-refused":{name:`Kamera akışına erişilemez`,cause:`Canlı kameraya RTSPS 322 portunda erişilemedi. Port engellendi veya yazıcıda kamera veya LAN canlı görünümü kapalı.`,fix:`Yazıcıda kamerayı ve LAN canlı görünümünü etkinleştirin ve port 322'nin engellenmediğinden emin olun. Bu, baskıyı etkilemez.`},"database-locked":{name:`Veritabanı yazma çekişmesi`,cause:`SQLite veritabanı yük altında "veritabanı kilitli" hatalarıyla karşılaşıyor — aynı anda birkaç yazıcı çalıştırırken yaygındır.`,fix:`Bambuddy'yi harici bir PostgreSQL veritabanına geçirin. Dokümantasyondaki PostgreSQL kılavuzuna bakın.`}}},vpDiagnostic:{title:`Kurulum kontrolü — {{name}}`,runButton:`Kurulum kontrolünü çalıştır`,running:`Kurulum kontrolü çalışıyor...`,runFailed:`Kurulum kontrolü çalıştırılamadı: {{error}}`,retry:`Tekrar çalıştır`,overall:{ok:`Tüm kontroller geçti — bu sanal yazıcı doğru şekilde kurulmuş.`,warnings:`Sanal yazıcı çalışmalı, ancak bazı şeyler dikkat gerektiriyor.`,problems:`Dilimleyicinin bu sanal yazıcıyı neden göremediğini veya kullanamadığını açıklayan sorunlar bulundu.`},check:{enabled:{title:`Sanal yazıcı etkin`,fail:`Bu sanal yazıcı kapatılmış. Keşfedilebilir hale getirmek için açın.`},running:{title:`Servisler çalışıyor`,fail:`Sanal yazıcı etkin ancak servisleri çalışmıyor. Bambuddy günlüğünü kontrol edin — bir bind IP çakışması veya bir izin hatası genellikle onları durdurur.`},bind_interface:{title:`Bind ağ arayüzü`,fail:`Bind arayüzü ayarlanmamış veya artık bu ana bilgisayarda mevcut değil. Bind Arayüzü açılır menüsünde mevcut bir arayüz seçin.`},access_code:{title:`Erişim kodu ayarlandı`,fail:`Erişim kodu ayarlanmamış. Dilimleyiciye burada ayarladığınız aynı 8 karakterli erişim kodunun verilmesi gerekir.`},target_printer:{title:`Hedef yazıcı`,fail:`Hedef yazıcı seçilmemiş. Proxy modu iletmek için gerçek bir yazıcıya ihtiyaç duyar.`,warn:`Hedef yazıcı şu anda çevrimdışı — yeniden bağlandığında proxy devam edecek.`},port_ftps:{title:`Dosya yükleme servisi (port {{port}})`,fail:`Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyici dosya yükleyemez. Bu arayüzde bir port çakışması genellikle nedendir.`},port_mqtt:{title:`Kontrol servisi (port {{port}})`,fail:`Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyici bağlanamaz veya durum gösteremez.`},port_bind:{title:`Keşif servisi (port {{port}})`,fail:`Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyicinin keşif el sıkışması başarısız oluyor.`},certificate:{title:`TLS sertifikası`,pass:`Sertifika hazır. Bambuddy CA sertifikasının (yukarıda) dilimleyicinizin güven deposuna içe aktarıldığından emin olun.`,fail:`Bu sanal yazıcı için TLS sertifikası eksik. Bambuddy veri dizininin yazılabilir olduğunu kontrol edin.`}}},bugReport:{title:`Hata Bildir`,description:`Açıklama`,descriptionPlaceholder:`Ne ters gitti? Lütfen sorunu tanımlayın...`,email:`E-posta (isteğe bağlı)`,emailPlaceholder:`sizin@email.com`,emailPrivacy:`Sağlanırsa, e-postanız GitHub sorunundaki daraltılmış bir bölümde dahil edilecek, böylece bakımcı takip edebilir.`,screenshot:`Ekran Görüntüsü`,uploadOrPaste:`Bir görüntü yükleyin, yapıştırın veya sürükleyin`,dataCollectedSummary:`Rapora hangi veriler dahil edilir?`,dataIncluded:`Dahil:`,dataIncludedList:`Uygulama sürümü, OS, mimari, Python sürümü, veritabanı istatistikleri (yalnızca sayılar), yazıcı modelleri, nozul sayıları, firmware sürümleri, bağlantı durumu, entegrasyon durumu (Spoolman, MQTT, HA), hassas olmayan ayarlar, ağ arayüzü sayısı, Docker ayrıntıları, bağımlılık sürümleri.`,dataNeverIncluded:`Asla dahil edilmez:`,dataNeverIncludedList:`Yazıcı adları, seri numaraları, erişim kodları, parolalar, IP adresleri, e-posta adresleri, API anahtarları, belirteçler, webhook URL'leri, ana bilgisayar adları veya kullanıcı adları.`,submit:`Gönder`,startLogging:`Hata Ayıklama Kaydını Başlat`,stepEnableLogging:`Hata ayıklama kaydı etkin`,stepReproduce:`Sorunu şimdi yeniden oluşturun`,stepStopLogging:`Durdur ve raporu gönder`,stopAndSubmit:`Durdur ve Gönder`,maxDuration:`{{minutes}} dk sonra otomatik durur`,stoppingLogs:`Günlükler toplanıyor ve gönderiliyor...`,submitting:`Hata raporu gönderiliyor...`,submittingStepConnection:`Yazıcı bağlantı kontrolleri çalıştırılıyor`,submittingStepVirtualPrinters:`Sanal yazıcı kurulum kontrolleri çalıştırılıyor`,submittingStepLogScan:`Son günlüklerde bilinen sorunlar taranıyor`,submittingStepSubmit:`Rapor GitHub'a gönderiliyor`,submitSuccess:`Hata raporu başarıyla gönderildi!`,submitFailed:`Hata raporu gönderilemedi`,diagnosticChecking:`Yazıcı bağlantıları kontrol ediliyor...`,diagnosticHealthy:`Bağlantı kontrolü başarılı — yazıcılarınızda sorun bulunamadı.`,diagnosticSummary:`{{total}} yazıcıdan {{problems}} tanesinde bağlantı sorunu var`,diagnosticIntro:`Bir veya daha fazla yazıcının sorununuza neden olabilecek bir bağlantı sorunu var. Düzeltmeyi görmek için aşağıda bir yazıcıyı genişletin — bunu çözmek, hata raporu olmadan sorunu çözebilir. Yine de aşağıda bir rapor gönderebilirsiniz.`,logHealthSummary:`Günlüklerinizde bilinen sorunlar bulundu`,logHealthIntro:`Son günlükler bilinen sorunlarla eşleşiyor. Aşağıdaki düzeltmeleri kontrol edin — bunları çözmek, hata raporu olmadan sorununuzu çözebilir. Yine de aşağıda bir rapor gönderebilirsiniz.`,thankYou:`Teşekkürler!`,submitted:`Hata raporunuz gönderildi.`,viewIssue:`Sorunu Görüntüle`,unexpectedError:`Beklenmedik bir hata oluştu`},failureDetection:{title:`AI Başarısızlık Algılama`,description:`Baskıları kendi barındırılan bir Obico ML API ile izle ve algılanan başarısızlıklara otomatik olarak yanıt ver.`,mlUrl:`Obico ML API URL'si`,mlUrlHint:`Kendi barındırılan Obico ml_api konteynerinizin temel URL'si (örn. http://192.168.1.10:3333).`,test:`Test`,testSuccess:`ML API erişilebilir ve sağlıklı.`,testFailed:`ML API'ye erişilemedi.`,sensitivity:`Hassasiyet`,sensitivityLow:`Düşük (daha az yanlış pozitif)`,sensitivityMedium:`Orta (dengeli)`,sensitivityHigh:`Yüksek (erken algıla, daha fazla yanlış pozitif)`,sensitivityHint:`Uyarıları ve başarısızlıkları tetikleyen güven eşiklerini ayarlar.`,action:`Algılanan başarısızlıkta eylem`,actionNotify:`Yalnızca bildir`,actionPause:`Baskıyı duraklat`,actionPauseOff:`Duraklat ve gücü kes`,pollInterval:`Sorgulama aralığı (saniye)`,pollIntervalHint:`Baskı yaparken her yazıcının ne sıklıkta kontrol edileceği. Minimum 5sn, maksimum 120sn.`,externalUrlMissing:`Harici URL ayarlanmamış.`,externalUrlHint:`ML API, kamera anlık görüntüsünü URL üzerinden alır. ML API konteyneri Bambuddy'ye erişebilsin diye Genel ayarlarda Harici URL'yi ayarlayın.`,perPrinterTitle:`İzlenen Yazıcılar`,perPrinterHint:`Algılama servisinin hangi yazıcıları izleyeceğini seçin.`,monitorAll:`Tüm bağlı yazıcıları izle`,statusTitle:`Durum`,serviceRunning:`Servis çalışıyor`,thresholds:`Düşük / Yüksek eşikler`,activePrinters:`Aktif baskılar`,noActivePrints:`Şu anda çalışan baskı yok.`,historyTitle:`Son Algılamalar`,noHistory:`Henüz algılama yok.`},makerworld:{title:`MakerWorld`,description:`Bambu Handy uygulamasına gitmeden — doğrudan Bambuddy'den içe aktarmak ve yazdırmak için bir MakerWorld model URL'si yapıştırın.`,pasteUrlHeader:`MakerWorld'den İçe Aktar`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… veya herhangi bir MakerWorld bağlantısını yapıştırın`,resolveButton:`Çöz`,signInRequiredTitle:`İndirme için Bambu Cloud girişi gerekli`,signInRequiredBody:`Model ayrıntılarına anonim olarak göz atabilirsiniz, ancak MakerWorld 3MF dosyalarını indirmek için bir Bambu Cloud hesabı gerektirir.`,openCloudSettings:`Bulut ayarlarını aç`,untitledModel:`Adsız model`,byCreator:`{{name}} tarafından`,downloadsCount:`{{count}} indirme`,licensePrefix:`Lisans`,alreadyImported:`Zaten kütüphanede`,openOnMakerworld:`MakerWorld'de aç`,alreadyInLibrary:`Bu model zaten kütüphanenizde — Dosya Yöneticisi → MakerWorld'de bulun`,importSuccess:`{{filename}} içe aktarıldı — Dosya Yöneticisi → MakerWorld'e kaydedildi`,platesHeader:`Plakalar ({{count}})`,plateDefaultName:`Plaka {{n}}`,materialCount:`{{count}} filament`,amsRequired:`AMS gerekli`,slicedFor:`{{printer}} için dilimlendi`,alsoCompatible:`Ayrıca uyumlu olarak işaretlendi: {{printers}}`,importToLibrary:`Kaydet`,sliceIn:`Kaydet ve {{slicer}}'de Dilimle`,disclaimer:`MakerWorld entegrasyonu topluluk tarafından belgelenen API uç noktalarını kullanır. Bambuddy, MakerWorld veya Bambu Lab ile ilişkili veya onaylı değildir.`,lastImportSuccess:`Kütüphanenize içe aktarıldı`,lastImportAlreadyInLibrary:`Zaten kütüphanenizde`,viewInLibrary:`Dosya Yöneticisinde Görüntüle`,openInBambuStudio:`Bambu Studio'da Aç`,openInOrcaSlicer:`OrcaSlicer'da Aç`,importTo:`Dosya yöneticisine içe aktar`,recentImportsHeader:`Son içe aktarımlar`,phaseResolving:`Çözülüyor`,phaseDownloading:`İndiriliyor`,folderAuto:`MakerWorld (varsayılan)`,importAll:`Tümünü içe aktar`,importAllProgress:`{{current}}/{{total}} içe aktarılıyor`,openGallery:`Görüntü galerisini aç`,galleryPrev:`Önceki görüntü`,galleryNext:`Sonraki görüntü`,deleteImport:`Kütüphaneden kaldır`,importDeleting:`Kaldırılıyor…`,importDeleted:`Kütüphaneden kaldırıldı`,confirmDelete:`{{filename}} kütüphaneden kaldırılsın mı? Bu, yerel dosyayı siler ancak plaka MakerWorld'den yeniden içe aktarılabilir.`,errors:{resolveFailed:`O MakerWorld URL'si çözülemedi.`,downloadFailed:`İndirme başarısız. Lütfen tekrar deneyin.`,deleteFailed:`Dosya kütüphaneden kaldırılamadı.`}},gcodeViewer:{back:`Geri`,backToArchives:`Baskı Arşivlerine Dön`,backToFiles:`Dosya Yöneticisine Dön`},libraryTrash:{title:`Çöp Kutusu`,headerButton:`Çöp`,headerTooltip:`Çöpe taşınan dosyaları görüntüle`,backToFiles:`Dosya Yöneticisine Dön`,subtitleAdmin:`Silinen dosyalar burada {{days}} gün kalır, ardından otomatik silinir. Bu görünüm tüm kullanıcılar için çöpteki dosyaları gösterir.`,subtitleUser:`Silinen dosyalar burada {{days}} gün kalır, ardından otomatik silinir.`,loading:`Çöp yükleniyor…`,loadError:`Çöp yüklenemedi.`,empty:`Çöp boş.`,summary:`{{count}} dosya · {{size}}`,emptyTrash:`Çöpü boşalt`,restore:`Geri Yükle`,purgeNow:`Şimdi sil`,autoPurgeIn:`{{when}} içinde otomatik silinir`,days:`gün`,retentionLabel:`Otomatik sil`,selectAll:`Tümünü seç`,selectOne:`{{filename}} seç`,selectionCount:`{{count}} seçildi`,bulkRestore:`Seçilenleri geri yükle`,bulkPurge:`Seçilenleri sil`,col:{filename:`Dosya`,folder:`Klasör`,size:`Boyut`,deleted:`Çöpe taşındı`,autoPurge:`Otomatik silinir`,owner:`Sahip`,actions:`İşlemler`},confirm:{purgeTitle:`Kalıcı olarak silinsin mi?`,purgeBody:`{{filename}} diskten silinecek ve geri yüklenemeyecek.`,emptyTitle:`Çöp boşaltılsın mı?`,emptyBody:`Tüm {{count}} dosya diskten silinecek. Bu geri alınamaz.`,bulkPurgeTitle:`Seçili dosyalar kalıcı olarak silinsin mi?`,bulkPurgeBody:`Seçili {{count}} dosya diskten silinecek ve geri yüklenemeyecek.`,cta:`Kalıcı olarak sil`},toast:{restored:`Dosya geri yüklendi.`,restoreFailed:`Dosya geri yüklenemedi.`,purged:`Dosya kalıcı olarak silindi.`,purgeFailed:`Dosya silinemedi.`,emptied:`{{count}} dosya çöpten silindi.`,emptyFailed:`Çöp boşaltılamadı.`,retentionSaved:`Otomatik silme {{days}} gün olarak ayarlandı.`,retentionFailed:`Saklama ayarı kaydedilemedi.`,bulkRestored:`{{count}} dosya geri yüklendi.`,bulkPurged:`{{count}} dosya silindi.`}},libraryPurge:{title:`Eski dosyaları temizle`,headerButton:`Eskileri temizle`,headerTooltip:`Eski dosyaları toplu olarak çöpe taşı`,description:`Kütüphanenizden eski dosyaları tek seferde temizleyin. Baskı geçmişi olan dosyalar son baskı tarihlerine göre, hiç yazdırılmamış dosyalar yükleme tarihlerine göre yaşlandırılır.`,ageLabel:`Şundan eski dosyaları taşı`,days:`gün`,includeNeverPrinted:`Hiç yazdırılmamış dosyaları dahil et`,effectsTitle:`Temizle'ye tıkladığınızda ne olur`,effect1:`Eşleşen dosyalar Çöp'e taşınır — henüz diskten silinmezler.`,effect2:`Saklama penceresi sona erene kadar Çöp'ten herhangi bir zamanda geri yükleyebilirsiniz.`,effect3:`Saklama sonrası, çöp süpürücü onları kalıcı olarak diskten kaldırır.`,effect4:`Harici (bağlı) klasörlerdeki dosyalar atlanır — Bambuddy asla sahibi olmadığı bayt'ları silmez.`,previewLoading:`Kaç dosyanın eşleştiği kontrol ediliyor…`,previewFailed:`Temizleme önizlenemedi.`,previewSummary:`{{count}} dosya · {{size}} çöpe taşınacak`,andMore:`…ve {{count}} daha`,warning:`Çöpe taşınan dosyalar saklama penceresi sona erene kadar depolama alanını kullanmaya devam eder. Diski hemen boşaltmak için sonradan Çöp'ü boşaltın.`,confirmCta:`{{count}} dosyayı çöpe taşı`,purging:`Çöpe taşınıyor…`,toast:{success:`{{count}} dosya çöpe taşındı.`,failed:`Dosyalar temizlenemedi.`}},libraryAutoPurge:{enableLabel:`Eski dosyaları otomatik temizle`,enableDescription:`Yönetici temizliğini günde bir kez çalıştırır. Dosyalar önce Çöp'e gider — hemen silinmezler.`,ageLabel:`Şundan eski dosyaları otomatik temizle`,ageDescription:`Minimum 7 gün, maksimum 10 yıl. Manuel Temizle düğmesiyle aynı yaş kuralını kullanır.`,days:`gün`,includeNeverPrinted:`Hiç yazdırılmamış dosyaları dahil et`,saveFailed:`Otomatik temizleme ayarları kaydedilemedi.`},archivePurge:{headerButton:`Eskileri temizle`,headerTooltip:`Eski arşivleri toplu olarak sil`,title:`Eski arşivleri temizle`,description:`Eski baskı geçmişini temizleyin. Her arşiv en son baskı tamamlamasına göre yaşlandırılır — bir arşivi yeniden yazdırmak yaşını yeniler, bu nedenle aktif çalışma asla temizlenmez.`,ageLabel:`Son şu kadar günde yazdırılmamış arşivleri sil`,days:`gün`,effectsTitle:`Temizle'ye tıkladığınızda ne olur`,effect1:`Eşleşen her arşiv listelerden gizlenir ve dosyaları diskten kaldırılır (3MF, küçük resim, zaman atlamalı video, kaynak 3MF, F3D tasarım dosyası, fotoğraflar).`,effect2:`Arşiv satırı veritabanında kalır, böylece Hızlı İstatistikler filament, süre, maliyet ve enerji katkısını korur — tek arşiv silme varsayılanı ile aynı.`,effect3:`Hızlı İstatistik katkısını da kaldırmak için aşağıdaki "Ayrıca istatistiklerden kaldır"ı işaretleyin (tek arşiv silme seçeneğiyle eşleşir). O yol geri alınamaz.`,effect4:`Bir arşivi yeniden yazdırmak yaş saatini yeniler, bu nedenle hâlâ kullandığınız arşivler güvendedir.`,purgeStatsLabel:`Ayrıca istatistiklerden kaldır`,purgeStatsHint:`Eşleşen arşivleri Hızlı İstatistiklerden (filament, süre, maliyet, enerji) düşürür. Bu olmadan, Hızlı İstatistikler her katkıyı korur ve yalnızca dosyalar diskten ayrılır.`,previewLoading:`Kaç arşivin eşleştiği kontrol ediliyor…`,previewFailed:`Temizleme önizlenemedi.`,previewSummary:`{{count}} arşiv · {{size}} kaldırılacak`,andMore:`…ve {{count}} daha`,warning:`Dosyalar diskten kaldırılır ve geri yüklenemez. Devam etmeden önce saklamak istediğiniz her şeyi indirin veya favoriye ekleyin.`,confirmCta:`{{count}} arşivi kaldır`,purging:`Kaldırılıyor…`,toast:{success:`{{count}} arşiv kaldırıldı.`,failed:`Arşivler temizlenemedi.`}},archiveAutoPurge:{enableLabel:`Eski arşivleri otomatik temizle`,enableDescription:`Günde bir kez, eşik içinde yazdırılmamışsa arşivleri listelerden gizler ve dosyalarını diskten kaldırır. Bir arşivi yeniden yazdırmak saati sıfırlar.`,ageLabel:`Son şu kadar günde yazdırılmamış arşivleri otomatik sil`,ageDescription:`Minimum 7 gün, maksimum 10 yıl. En son baskı tamamlamasına göre — bir arşivi yeniden yazdırmak yaşını yeniler. 3MF, küçük resim, zaman atlamalı video, kaynak 3MF, F3D ve fotoğrafları kaldırır.`,days:`gün`,purgeStatsLabel:`Ayrıca istatistiklerden kaldır`,purgeStatsDescription:`Etkinleştirildiğinde, günlük süpürücü her temizlenen arşivi de Hızlı İstatistiklerden (filament, süre, maliyet, enerji) düşürür. Varsayılan kapalı — Hızlı İstatistikler katkıyı korur, yalnızca dosyalar diskten ayrılır.`,runNow:`Arşivleri şimdi temizle`,saveFailed:`Otomatik temizleme ayarları kaydedilemedi.`},cameraTokens:{title:`Kamera API Belirteçleri`,navTitle:`Kamera API belirteçleri`,description:`Kamera akışını Home Assistant, Frigate, kiosklar veya kararlı bir URL'ye ihtiyaç duyan başka herhangi bir araca gömmek için uzun ömürlü belirteçler. Her belirteç yalnızca kamera akışı içindir ve herhangi bir zamanda iptal edilebilir.`,loading:`Yükleniyor…`,confirmRevoke:{title:`Bu belirteç iptal edilsin mi?`,body:`"{{name}}" kullanan herhangi bir cihaz hemen erişimini kaybedecek. Bu geri alınamaz.`,cancel:`İptal`,confirm:`İptal Et`},create:{title:`Yeni belirteç oluştur`,nameLabel:`Belirteç adı`,namePlaceholder:`örn. Home Assistant`,daysLabel:`Sona erene kadar gün`,submit:`Oluştur`,hint:`Maksimum ömür 365 gün. Belirteç değeri oluşturmada yalnızca bir kez gösterilir — şimdi kopyalayın.`},created:{title:`Belirteç oluşturuldu — şimdi kopyalayın`,warning:`Bu, bu belirtecin görünür olacağı tek seferdir. Bu iletişim kutusunu kapattıktan sonra onu bir daha asla görüntüleyemezsiniz.`,copy:`Kopyala`,dismiss:`Kaydettim`},list:{myTitle:`Belirteçlerim`,allTitle:`Tüm kullanıcılar (yönetici görünümü)`,empty:`Henüz belirteç yok.`,name:`Ad`,owner:`Sahip`,prefix:`Önek`,created:`Oluşturuldu`,expires:`Sona Erer`,lastUsed:`Son kullanım`,revoke:`İptal Et`,expired:`Süresi Doldu`},toast:{created:`Belirteç oluşturuldu`,createFailed:`Belirteç oluşturulamadı`,revoked:`Belirteç iptal edildi`,revokeFailed:`Belirteç iptal edilemedi`,loadFailed:`Belirteçler yüklenemedi`,copied:`Panoya kopyalandı`,copyFailed:`Kopyalama başarısız — manuel olarak seçip kopyalayın`}},forecast:{title:`Tahmin`,noSpools:`Aktif makara bulunamadı. Tahmin verisini görmek için envanterinize makara ekleyin.`,noUsageData:`Kullanım verisi mevcut değil — stok zaman çizelgesi öngörülemiyor.`,sku:`SKU`,material:`Malzeme`,stock:`Stok`,dailyRate:`Oran`,daysLeft:`Kalan Gün`,emptyBy:`Şu Tarihte Boş`,reorderBy:`Şu Tarihte Sipariş`,actions:`İşlemler`,trend:`Trend`,estimated:`Tahmini`,noData:`Veri yok`,timeframe:`Zaman Aralığı`,chartTitle:`Öngörülen Stok — İlk 5 Malzeme`,dashedLinesROP:`Kesik çizgiler = yeniden sipariş noktaları`,stockLevel:`Stok Seviyesi`,reorderPoint:`Yeniden Sipariş Noktası`,safetyMargin:`Güvenlik Marjı`,trendLegend:`Trend (geçmiş tabanlı, %95 servis seviyesi)`,estimatedLegend:`Tahmini (ağırlık farkı)`,noDataLegend:`Veri yok`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`Güvenlik stoku`,stockArrivalLegend:`Stok varışı`,stockoutLegend:`Stok tükenmesi`,alertCount_one:`{{count}} uyarı`,alertCount_other:`{{count}} uyarı`,order:`Sipariş`,save:`Kaydet`,cancel:`İptal`,settingsSaved:`Ayarlar kaydedildi`,failedSaveSettings:`Ayarlar kaydedilemedi`,globalLeadTimeSaved:`Global teslim süresi kaydedildi`,globalLeadTime:`Global teslim süresi`,globalLeadTimeHint:`Global teslim süresi tabanı — tüm SKU'lar için yeniden sipariş noktası hesaplamasında kullanılır`,skuLeadTimeOverride:`SKU Teslim Süresi Geçersiz Kılma`,skuLeadTimeHint:`0 = global teslim süresini kullan. Bu SKU için geçersiz kılmak için >0 ayarlayın.`,safetyMarginLabel:`Güvenlik Marjı`,effectiveLeadTime:`Etkili Teslim Süresi`,effectiveLeadTimeHint:`max(global {{global}}g, SKU {{sku}}g)`,reorderPointHint:`d̄ × LT + güvenlik marjı — stok bu seviyeye geldiğinde sipariş ver`,safetyMarginHint:`İstatistiksel güvenlik stoku (z=1.65 × σ × √LT) + kullanıcı tanımlı tampon`,safetyMarginHintDays:`İstatistiksel güvenlik stokunun üzerine eklenen tampon.{{approx}}`,safetyMarginHintDaysApprox:` ≈ mevcut oranda {{g}}g.`,safetyMarginHintG:`İstatistiksel güvenlik stokunun üzerine eklenen sabit ağırlık tamponu.{{approx}}`,safetyMarginHintGApprox:` ≈ mevcut oranda {{days}}g.`,individualSpools:`Bireysel makaralar`,labelWeight:`Etiket`,spoolCount_one:`{{count}} makara`,spoolCount_other:`{{count}} makara`,stockBreakRisk:`Stok tükenme riski`,stockBreakDetail:`{{days}}g kaldı, teslim süresi {{lt}}g.`,stockBreakBefore:`Yenileme öncesi stok tükenmesi`,reorderNow:`Şimdi sipariş ver`,reorderTriggerPassed:`Tetikleyici tarih {{date}} geçti.`,shoppingList:`Alışveriş Listesi`,shoppingListItems_one:`({{count}} öğe)`,shoppingListItems_other:`({{count}} öğe)`,shoppingListEmpty:`Alışveriş listesi boş. Öğe eklemek için herhangi bir satırdaki sepet simgesine tıklayın.`,addToCart:`Alışveriş listesine ekle`,alertsSnoozed:`Bu SKU için uyarıları sustur`,alertsEnabled:`Bu SKU için uyarıları aç`,addedToCart:`Alışveriş listesine eklendi`,failedAddItem:`Öğe eklenemedi`,listView:`Liste`,logisticsView:`Lojistik`,qty:`Adet`,weight:`Ağırlık`,leadTime:`Teslim Süresi`,expectedRestock:`Beklenen Yenileme`,status:`Durum`,note:`Not`,pending:`Beklemede`,purchased:`Satın Alındı`,received:`Teslim Alındı`,markPurchased:`Satın alındı olarak işaretle`,markReceived:`Teslim alındı olarak işaretle — makaraları Stok envanterine ekler`,resetToPending:`Beklemeye sıfırla`,remove:`Kaldır`,clearAll:`Tümünü temizle`,downloadCsv:`CSV`,addToCartTitle:`Alışveriş Listesine Ekle`,byQuantity:`Miktara Göre`,byDuration:`Süreye Göre`,numberOfSpools:`Makara sayısı`,lastHowManyDays:`Kaç gün dayanmalı?`,noUsageQty:`Kullanım verisi yok — miktar 1 olarak ayarlandı.`,noteOptional:`Not (isteğe bağlı)`,notePlaceholder:`örn. X projesi için, acil…`,addNSpools_one:`{{count}} makara ekle`,addNSpools_other:`{{count}} makara ekle`,onArrival:`Varışta`,stockBreakIn:`{{days}}g içinde stok tükenmesi.`,stockRunsOutBefore:`{{lt}}g teslim süresi dolmadan önce stok tükenir.`,atRate:`{{rate}}g/gün oranında size gerekli`,moreSpools_one:`{{count}} daha makara`,moreSpools_other:`{{count}} daha makara`,bridgeGap:`boşluğu kapatmak için.`,noReadAccess:`Envanter tahminlerini görüntüleme izniniz yok.`,noWriteAccess:`Tahmin ayarlarını değiştirme izniniz yok.`}}}},fallbackLng:`en`,supportedLngs:[`en`,`de`,`es`,`fr`,`ja`,`it`,`ko`,`pt-BR`,`tr`,`zh-CN`,`zh-TW`],detection:{order:[`localStorage`,`navigator`,`htmlTag`],lookupLocalStorage:`bambutrack_language`,caches:[`localStorage`]},interpolation:{escapeValue:!1},react:{useSuspense:!1}});var wt=[{code:`en`,name:`English`,nativeName:`English`},{code:`de`,name:`German`,nativeName:`Deutsch`},{code:`es`,name:`Spanish`,nativeName:`Español`},{code:`fr`,name:`French`,nativeName:`Français`},{code:`ja`,name:`Japanese`,nativeName:`日本語`},{code:`it`,name:`Italian`,nativeName:`Italiano`},{code:`ko`,name:`Korean`,nativeName:`한국어`},{code:`pt-BR`,name:`Portuguese (Brazil)`,nativeName:`Português (Brasil)`},{code:`zh-CN`,name:`Chinese (Simplified)`,nativeName:`简体中文`},{code:`zh-TW`,name:`Chinese (Traditional)`,nativeName:`繁體中文`},{code:`tr`,name:`Turkish`,nativeName:`Türkçe`}],Tt=`modulepreload`,Et=function(e){return`/`+e},Dt={},Ot=function(e,t,n){let r=Promise.resolve();if(t&&t.length>0){let e=document.getElementsByTagName(`link`),i=document.querySelector(`meta[property=csp-nonce]`),a=i?.nonce||i?.getAttribute(`nonce`);function o(e){return Promise.all(e.map(e=>Promise.resolve(e).then(e=>({status:`fulfilled`,value:e}),e=>({status:`rejected`,reason:e}))))}r=o(t.map(t=>{if(t=Et(t,n),t in Dt)return;Dt[t]=!0;let r=t.endsWith(`.css`),i=r?`[rel="stylesheet"]`:``;if(n)for(let n=e.length-1;n>=0;n--){let i=e[n];if(i.href===t&&(!r||i.rel===`stylesheet`))return}else if(document.querySelector(`link[href="${t}"]${i}`))return;let o=document.createElement(`link`);if(o.rel=r?`stylesheet`:Tt,r||(o.as=`script`),o.crossOrigin=``,o.href=t,a&&o.setAttribute(`nonce`,a),document.head.appendChild(o),r)return new Promise((e,n)=>{o.addEventListener(`load`,e),o.addEventListener(`error`,()=>n(Error(`Unable to preload CSS for ${t}`)))})}))}function i(e){let t=new Event(`vite:preloadError`,{cancelable:!0});if(t.payload=e,window.dispatchEvent(t),!t.defaultPrevented)throw e}return r.then(t=>{for(let e of t||[])e.status===`rejected`&&i(e.reason);return e().catch(i)})},kt=`popstate`;function At(e){return typeof e==`object`&&!!e&&`pathname`in e&&`search`in e&&`hash`in e&&`state`in e&&`key`in e}function jt(e={}){function t(e,t){let n=t.state?.masked,{pathname:r,search:i,hash:a}=n||e.location;return Ft(``,{pathname:r,search:i,hash:a},t.state&&t.state.usr||null,t.state&&t.state.key||`default`,n?{pathname:e.location.pathname,search:e.location.search,hash:e.location.hash}:void 0)}function n(e,t){return typeof t==`string`?t:It(t)}return Rt(t,n,null,e)}function Mt(e,t){if(e===!1||e==null)throw Error(t)}function G(e,t){if(!e){typeof console<`u`&&console.warn(t);try{throw Error(t)}catch{}}}function Nt(){return Math.random().toString(36).substring(2,10)}function Pt(e,t){return{usr:e.state,key:e.key,idx:t,masked:e.mask?{pathname:e.pathname,search:e.search,hash:e.hash}:void 0}}function Ft(e,t,n=null,r,i){return{pathname:typeof e==`string`?e:e.pathname,search:``,hash:``,...typeof t==`string`?Lt(t):t,state:n,key:t&&t.key||r||Nt(),mask:i}}function It({pathname:e=`/`,search:t=``,hash:n=``}){return t&&t!==`?`&&(e+=t.charAt(0)===`?`?t:`?`+t),n&&n!==`#`&&(e+=n.charAt(0)===`#`?n:`#`+n),e}function Lt(e){let t={};if(e){let n=e.indexOf(`#`);n>=0&&(t.hash=e.substring(n),e=e.substring(0,n));let r=e.indexOf(`?`);r>=0&&(t.search=e.substring(r),e=e.substring(0,r)),e&&(t.pathname=e)}return t}function Rt(e,t,n,r={}){let{window:i=document.defaultView,v5Compat:a=!1}=r,o=i.history,s=`POP`,c=null,l=u();l??(l=0,o.replaceState({...o.state,idx:l},``));function u(){return(o.state||{idx:null}).idx}function d(){s=`POP`;let e=u(),t=e==null?null:e-l;l=e,c&&c({action:s,location:h.location,delta:t})}function f(e,t){s=`PUSH`;let r=At(e)?e:Ft(h.location,e,t);n&&n(r,e),l=u()+1;let d=Pt(r,l),f=h.createHref(r.mask||r);try{o.pushState(d,``,f)}catch(e){if(e instanceof DOMException&&e.name===`DataCloneError`)throw e;i.location.assign(f)}a&&c&&c({action:s,location:h.location,delta:1})}function p(e,t){s=`REPLACE`;let r=At(e)?e:Ft(h.location,e,t);n&&n(r,e),l=u();let i=Pt(r,l),d=h.createHref(r.mask||r);o.replaceState(i,``,d),a&&c&&c({action:s,location:h.location,delta:0})}function m(e){return zt(i,e)}let h={get action(){return s},get location(){return e(i,o)},listen(e){if(c)throw Error(`A history only accepts one active listener`);return i.addEventListener(kt,d),c=e,()=>{i.removeEventListener(kt,d),c=null}},createHref(e){return t(i,e)},createURL:m,encodeLocation(e){let t=m(e);return{pathname:t.pathname,search:t.search,hash:t.hash}},push:f,replace:p,go(e){return o.go(e)}};return h}function zt(e,t,n=!1){let r=`http://localhost`;e&&(r=e.location.origin===`null`?e.location.href:e.location.origin),Mt(r,`No window.location.(origin|href) available to create URL`);let i=typeof t==`string`?t:It(t);return i=i.replace(/ $/,`%20`),!n&&i.startsWith(`//`)&&(i=r+i),new URL(i,r)}function Bt(e,t,n=`/`){return Vt(e,t,n,!1)}function Vt(e,t,n,r,i){let a=sn((typeof t==`string`?Lt(t):t).pathname||`/`,n);if(a==null)return null;let o=i??Ut(e),s=null,c=on(a);for(let e=0;s==null&&e{let c={relativePath:s===void 0?e.path||``:s,caseSensitive:e.caseSensitive===!0,childrenIndex:a,route:e};if(c.relativePath.startsWith(`/`)){if(!c.relativePath.startsWith(r)&&o)return;Mt(c.relativePath.startsWith(r),`Absolute route path "${c.relativePath}" nested under path "${r}" is not valid. An absolute child route path must start with the combined path of all its parent routes.`),c.relativePath=c.relativePath.slice(r.length)}let l=gn([r,c.relativePath]),u=n.concat(c);e.children&&e.children.length>0&&(Mt(e.index!==!0,`Index routes must not have child routes. Please remove all child routes from route path "${l}".`),Wt(e.children,t,u,l,o)),!(e.path==null&&!e.index)&&t.push({path:l,score:en(l,e.index),routesMeta:u})};return e.forEach((e,t)=>{if(e.path===``||!e.path?.includes(`?`))a(e,t);else for(let n of Gt(e.path))a(e,t,!0,n)}),t}function Gt(e){let t=e.split(`/`);if(t.length===0)return[];let[n,...r]=t,i=n.endsWith(`?`),a=n.replace(/\?$/,``);if(r.length===0)return i?[a,``]:[a];let o=Gt(r.join(`/`)),s=[];return s.push(...o.map(e=>e===``?a:[a,e].join(`/`))),i&&s.push(...o),s.map(t=>e.startsWith(`/`)&&t===``?`/`:t)}function Kt(e){e.sort((e,t)=>e.score===t.score?tn(e.routesMeta.map(e=>e.childrenIndex),t.routesMeta.map(e=>e.childrenIndex)):t.score-e.score)}var qt=/^:[\w-]+$/,Jt=3,Yt=2,Xt=1,Zt=10,Qt=-2,$t=e=>e===`*`;function en(e,t){let n=e.split(`/`),r=n.length;return n.some($t)&&(r+=Qt),t&&(r+=Yt),n.filter(e=>!$t(e)).reduce((e,t)=>e+(qt.test(t)?Jt:t===``?Xt:Zt),r)}function tn(e,t){return e.length===t.length&&e.slice(0,-1).every((e,n)=>e===t[n])?e[e.length-1]-t[t.length-1]:0}function nn(e,t,n=!1){let{routesMeta:r}=e,i={},a=`/`,o=[];for(let e=0;e{if(t===`*`){let e=s[r]||``;o=a.slice(0,a.length-e.length).replace(/(.)\/+$/,`$1`)}let i=s[r];return n&&!i?e[t]=void 0:e[t]=(i||``).replace(/%2F/g,`/`),e},{}),pathname:a,pathnameBase:o,pattern:e}}function an(e,t=!1,n=!0){G(e===`*`||!e.endsWith(`*`)||e.endsWith(`/*`),`Route path "${e}" will be treated as if it were "${e.replace(/\*$/,`/*`)}" because the \`*\` character must always follow a \`/\` in the pattern. To get rid of this warning, please change the route path to "${e.replace(/\*$/,`/*`)}".`);let r=[],i=`^`+e.replace(/\/*\*?$/,``).replace(/^\/*/,`/`).replace(/[\\.*+^${}|()[\]]/g,`\\$&`).replace(/\/:([\w-]+)(\?)?/g,(e,t,n,i,a)=>{if(r.push({paramName:t,isOptional:n!=null}),n){let t=a.charAt(i+e.length);return t&&t!==`/`?`/([^\\/]*)`:`(?:/([^\\/]*))?`}return`/([^\\/]+)`}).replace(/\/([\w-]+)\?(\/|$)/g,`(/$1)?$2`);return e.endsWith(`*`)?(r.push({paramName:`*`}),i+=e===`*`||e===`/*`?`(.*)$`:`(?:\\/(.+)|\\/*)$`):n?i+=`\\/*$`:e!==``&&e!==`/`&&(i+=`(?:(?=\\/|$))`),[new RegExp(i,t?void 0:`i`),r]}function on(e){try{return e.split(`/`).map(e=>decodeURIComponent(e).replace(/\//g,`%2F`)).join(`/`)}catch(t){return G(!1,`The URL path "${e}" could not be decoded because it is a malformed URL segment. This is probably due to a bad percent encoding (${t}).`),e}}function sn(e,t){if(t===`/`)return e;if(!e.toLowerCase().startsWith(t.toLowerCase()))return null;let n=t.endsWith(`/`)?t.length-1:t.length,r=e.charAt(n);return r&&r!==`/`?null:e.slice(n)||`/`}var cn=/^(?:[a-z][a-z0-9+.-]*:|\/\/)/i;function ln(e,t=`/`){let{pathname:n,search:r=``,hash:i=``}=typeof e==`string`?Lt(e):e,a;return n?(n=hn(n),a=n.startsWith(`/`)?un(n.substring(1),`/`):un(n,t)):a=t,{pathname:a,search:yn(r),hash:bn(i)}}function un(e,t){let n=_n(t).split(`/`);return e.split(`/`).forEach(e=>{e===`..`?n.length>1&&n.pop():e!==`.`&&n.push(e)}),n.length>1?n.join(`/`):`/`}function dn(e,t,n,r){return`Cannot include a '${e}' character in a manually specified \`to.${t}\` field [${JSON.stringify(r)}]. Please separate it out to the \`to.${n}\` field. Alternatively you may provide the full path as a string in and the router will parse it for you.`}function fn(e){return e.filter((e,t)=>t===0||e.route.path&&e.route.path.length>0)}function pn(e){let t=fn(e);return t.map((e,n)=>n===t.length-1?e.pathname:e.pathnameBase)}function mn(e,t,n,r=!1){let i;typeof e==`string`?i=Lt(e):(i={...e},Mt(!i.pathname||!i.pathname.includes(`?`),dn(`?`,`pathname`,`search`,i)),Mt(!i.pathname||!i.pathname.includes(`#`),dn(`#`,`pathname`,`hash`,i)),Mt(!i.search||!i.search.includes(`#`),dn(`#`,`search`,`hash`,i)));let a=e===``||i.pathname===``,o=a?`/`:i.pathname,s;if(o==null)s=n;else{let e=t.length-1;if(!r&&o.startsWith(`..`)){let t=o.split(`/`);for(;t[0]===`..`;)t.shift(),--e;i.pathname=t.join(`/`)}s=e>=0?t[e]:`/`}let c=ln(i,s),l=o&&o!==`/`&&o.endsWith(`/`),u=(a||o===`.`)&&n.endsWith(`/`);return!c.pathname.endsWith(`/`)&&(l||u)&&(c.pathname+=`/`),c}var hn=e=>e.replace(/\/\/+/g,`/`),gn=e=>hn(e.join(`/`)),_n=e=>e.replace(/\/+$/,``),vn=e=>_n(e).replace(/^\/*/,`/`),yn=e=>!e||e===`?`?``:e.startsWith(`?`)?e:`?`+e,bn=e=>!e||e===`#`?``:e.startsWith(`#`)?e:`#`+e,xn=class{constructor(e,t,n,r=!1){this.status=e,this.statusText=t||``,this.internal=r,n instanceof Error?(this.data=n.toString(),this.error=n):this.data=n}};function Sn(e){return e!=null&&typeof e.status==`number`&&typeof e.statusText==`string`&&typeof e.internal==`boolean`&&`data`in e}function Cn(e){return gn(e.map(e=>e.route.path).filter(Boolean))||`/`}var wn=typeof window<`u`&&window.document!==void 0&&window.document.createElement!==void 0;function Tn(e,t){let n=e;if(typeof n!=`string`||!cn.test(n))return{absoluteURL:void 0,isExternal:!1,to:n};let r=n,i=!1;if(wn)try{let e=new URL(window.location.href),r=n.startsWith(`//`)?new URL(e.protocol+n):new URL(n),a=sn(r.pathname,t);r.origin===e.origin&&a!=null?n=a+r.search+r.hash:i=!0}catch{G(!1,` contains an invalid URL which will probably break when clicked - please update to a valid URL path.`)}return{absoluteURL:r,isExternal:i,to:n}}Object.getOwnPropertyNames(Object.prototype).sort().join(`\0`);var En=[`POST`,`PUT`,`PATCH`,`DELETE`];new Set(En);var Dn=[`GET`,...En];new Set(Dn);var On=y.createContext(null);On.displayName=`DataRouter`;var kn=y.createContext(null);kn.displayName=`DataRouterState`;var An=y.createContext(!1);function jn(){return y.useContext(An)}var Mn=y.createContext({isTransitioning:!1});Mn.displayName=`ViewTransition`;var Nn=y.createContext(new Map);Nn.displayName=`Fetchers`;var Pn=y.createContext(null);Pn.displayName=`Await`;var Fn=y.createContext(null);Fn.displayName=`Navigation`;var In=y.createContext(null);In.displayName=`Location`;var Ln=y.createContext({outlet:null,matches:[],isDataRoute:!1});Ln.displayName=`Route`;var Rn=y.createContext(null);Rn.displayName=`RouteError`;var zn=`REACT_ROUTER_ERROR`,Bn=`REDIRECT`,Vn=`ROUTE_ERROR_RESPONSE`;function Hn(e){if(e.startsWith(`${zn}:${Bn}:{`))try{let t=JSON.parse(e.slice(28));if(typeof t==`object`&&t&&typeof t.status==`number`&&typeof t.statusText==`string`&&typeof t.location==`string`&&typeof t.reloadDocument==`boolean`&&typeof t.replace==`boolean`)return t}catch{}}function Un(e){if(e.startsWith(`${zn}:${Vn}:{`))try{let t=JSON.parse(e.slice(40));if(typeof t==`object`&&t&&typeof t.status==`number`&&typeof t.statusText==`string`)return new xn(t.status,t.statusText,t.data)}catch{}}function Wn(e,{relative:t}={}){Mt(Gn(),`useHref() may be used only in the context of a component.`);let{basename:n,navigator:r}=y.useContext(Fn),{hash:i,pathname:a,search:o}=tr(e,{relative:t}),s=a;return n!==`/`&&(s=a===`/`?n:gn([n,a])),r.createHref({pathname:s,search:o,hash:i})}function Gn(){return y.useContext(In)!=null}function Kn(){return Mt(Gn(),`useLocation() may be used only in the context of a component.`),y.useContext(In).location}var qn=`You should call navigate() in a React.useEffect(), not when your component is first rendered.`;function Jn(e){y.useContext(Fn).static||y.useLayoutEffect(e)}function Yn(){let{isDataRoute:e}=y.useContext(Ln);return e?br():Xn()}function Xn(){Mt(Gn(),`useNavigate() may be used only in the context of a component.`);let e=y.useContext(On),{basename:t,navigator:n}=y.useContext(Fn),{matches:r}=y.useContext(Ln),{pathname:i}=Kn(),a=JSON.stringify(pn(r)),o=y.useRef(!1);return Jn(()=>{o.current=!0}),y.useCallback((r,s={})=>{if(G(o.current,qn),!o.current)return;if(typeof r==`number`){n.go(r);return}let c=mn(r,JSON.parse(a),i,s.relative===`path`);e==null&&t!==`/`&&(c.pathname=c.pathname===`/`?t:gn([t,c.pathname])),(s.replace?n.replace:n.push)(c,s.state,s)},[t,n,a,i,e])}var Zn=y.createContext(null);function Qn(){return y.useContext(Zn)}function $n(e){let t=y.useContext(Ln).outlet;return y.useMemo(()=>t&&y.createElement(Zn.Provider,{value:e},t),[t,e])}function er(){let{matches:e}=y.useContext(Ln);return e[e.length-1]?.params??{}}function tr(e,{relative:t}={}){let{matches:n}=y.useContext(Ln),{pathname:r}=Kn(),i=JSON.stringify(pn(n));return y.useMemo(()=>mn(e,JSON.parse(i),r,t===`path`),[e,i,r,t])}function nr(e,t){return rr(e,t)}function rr(e,t,n){Mt(Gn(),`useRoutes() may be used only in the context of a component.`);let{navigator:r}=y.useContext(Fn),{matches:i}=y.useContext(Ln),a=i[i.length-1],o=a?a.params:{},s=a?a.pathname:`/`,c=a?a.pathnameBase:`/`,l=a&&a.route;{let e=l&&l.path||``;Sr(s,!l||e.endsWith(`*`)||e.endsWith(`*?`),`You rendered descendant (or called \`useRoutes()\`) at "${s}" (under ) but the parent route path has no trailing "*". This means if you navigate deeper, the parent won't match anymore and therefore the child routes will never render. +ON değeri: "ON" anlamına gelen tam string. Otomatik algılama için boş bırakın (ON, true, 1).`,restControl:`Kontrol`,restOnUrl:`AÇ URL'si`,restOffUrl:`KAPAT URL'si`,restOnBody:`AÇ İstek Gövdesi`,restOffBody:`KAPAT İstek Gövdesi`,restMethod:`HTTP Yöntemi`,restHeaders:`Özel Başlıklar (JSON)`,restStatusUrl:`Durum URL'si`,restStatusPath:`Durum JSON Yolu`,restStatusOnValue:`ON Değeri`,restPowerUrl:`Güç URL'si`,restPowerPath:`Güç JSON Yolu`,restPowerMultiplier:`Güç Çarpanı`,restEnergyUrl:`Enerji URL'si`,restEnergyPath:`Enerji JSON Yolu`,restEnergyMultiplier:`Enerji Çarpanı`,restUrlRequired:`REST prizleri için en az bir URL (ON veya OFF) gerekli`,restHeadersHint:`örn. {"Authorization": "Bearer your-token"}`,restBodyHint:`örn. ON, {"state": "on"}`,restStatusHint:`Mevcut durumu sorgulamak için URL`,restPathHint:`örn. state veya data.power.status`,restPowerUrlHint:`Güç verisi için ayrı URL (boşsa Durum URL'sini kullanır)`,restEnergyUrlHint:`Enerji verisi için ayrı URL (boşsa Durum URL'sini kullanır)`,restEnergyHint:`Her değer kendi URL'sini kullanabilir veya Durum URL'sine geri dönebilir. Birim dönüşümü için çarpanları kullanın (örn. Wh'yi kWh'ye dönüştürmek için 0.001).`,testConnection:`Bağlantıyı Test Et`,connectionSuccess:`Bağlantı başarılı`,noSwitchesInSwitchbar:`Anahtar çubuğunda anahtar yok`,enableSwitchbarHint:`Ayarlar > Akıllı Prizler'de "Anahtar Çubuğunda Göster"i etkinleştirin`},notifications:{providerTypes:{callmebot:`CallMeBot/WhatsApp`,ntfy:`ntfy`,pushover:`Pushover`,telegram:`Telegram`,email:`E-posta`,discord:`Discord`,webhook:`Webhook`,homeassistant:`Home Assistant`},providerDescriptions:{email:`SMTP e-posta bildirimleri`,telegram:`Telegram botu üzerinden bildirimler`,discord:`Webhook üzerinden Discord kanalına gönder`,ntfy:`Ücretsiz, kendi barındırılabilir push bildirimleri`,pushover:`Basit, güvenilir push bildirimleri`,callmebot:`CallMeBot üzerinden ücretsiz WhatsApp bildirimleri`,webhook:`Herhangi bir URL'ye genel HTTP POST`,homeassistant:`Home Assistant gösterge panelinde kalıcı bildirimler`},lastSuccess:`Son: {{date}}`,error:`Hata`,printer:`Yazıcı:`,allPrinters:`Tüm yazıcılar`,sendTestNotification:`Test Bildirimi Gönder`,eventSettings:`Olay Ayarları`,enabled:`Etkin`,sendFromProvider:`Bu sağlayıcıdan bildirim gönder`,printEvents:`Baskı Olayları`,printerStatus:`Yazıcı Durumu`,amsAlarms:`AMS Alarmları`,amsHtAlarms:`AMS-HT Alarmları`,printQueue:`Baskı Kuyruğu`,start:`Başlangıç`,plateCheck:`Plaka Kontrolü`,complete:`Tamamlandı`,failed:`Başarısız`,stopped:`Durduruldu`,progress:`İlerleme`,offline:`Çevrimdışı`,lowFilament:`Az Filament`,maintenance:`Bakım`,amsHumidity:`AMS Nemi`,amsTemp:`AMS Sıcaklığı`,amsHtHumidity:`AMS-HT Nemi`,amsHtTemp:`AMS-HT Sıcaklığı`,bedCooled:`Tabla Soğudu`,firstLayer:`İlk Katman`,quiet:`Sessiz`,digest:`Özet {{time}}`,printStarted:`Baskı Başladı`,plateNotEmpty:`Plaka Boş Değil`,plateNotEmptyDescription:`Baskıdan önce nesneler algılandı`,printCompleted:`Baskı Tamamlandı`,bedCooledLabel:`Tabla Soğudu`,bedCooledDescription:`Baskıdan sonra tabla eşiğin altına soğudu`,firstLayerCompleteLabel:`İlk Katman Tamamlandı`,firstLayerCompleteDescription:`İlk katman bittiğinde anlık görüntüyle bildir`,missingSpoolAssignmentLabel:`Eksik Makara Ataması`,missingSpoolAssignmentDescription:`Baskı başladığında ve gerekli tepsilerin atanmış makarası olmadığında bildir`,printFailed:`Baskı Başarısız`,printStopped:`Baskı Durduruldu`,progressMilestones:`İlerleme Kilometre Taşları`,progressMilestonesDescription:`%25, %50, %75'te bildir`,printerOffline:`Yazıcı Çevrimdışı`,printerError:`Yazıcı Hatası`,aiFailureDetection:`AI Hata Tespiti`,aiFailureDetectionDescription:`Obico AI olası bir baskı hatası tespit ettiğinde bildir`,lowFilamentLabel:`Az Filament`,maintenanceDue:`Bakım Zamanı`,maintenanceDueDescription:`Bakım gerektiğinde bildir`,amsHumidityHigh:`AMS Nemi Yüksek`,amsHumidityHighDescription:`Normal AMS nemi eşiği aşıyor`,amsTemperatureHigh:`AMS Sıcaklığı Yüksek`,amsTemperatureHighDescription:`Normal AMS sıcaklığı eşiği aşıyor`,amsHtHumidityHigh:`AMS-HT Nemi Yüksek`,amsHtHumidityHighDescription:`AMS-HT nemi eşiği aşıyor`,amsHtTemperatureHigh:`AMS-HT Sıcaklığı Yüksek`,amsHtTemperatureHighDescription:`AMS-HT sıcaklığı eşiği aşıyor`,inventoryAlerts:`Envanter Uyarıları`,stockReorderAlert:`Yeniden Sipariş Uyarısı`,stockReorderAlertDescription:`SKU yeniden sipariş noktasına ulaştı`,stockBreakAlert:`Stok Tükenme Uyarısı`,stockBreakAlertDescription:`Yenileme gelmeden stok tükenecek`,jobAdded:`İş Eklendi`,jobAddedDescription:`İş kuyruğa eklendi`,jobAssigned:`İş Atandı`,jobAssignedDescription:`Model tabanlı iş yazıcıya atandı`,jobStarted:`İş Başladı`,jobStartedDescription:`Kuyruk işi yazdırmaya başladı`,jobWaiting:`İş Bekliyor`,jobWaitingDescription:`İş filament veya yazıcı için bekliyor`,jobSkipped:`İş Atlandı`,jobSkippedDescription:`İş atlandı (önceki başarısız oldu)`,jobFailed:`İş Başarısız`,jobFailedDescription:`İş başlatılamadı`,queueComplete:`Kuyruk Tamamlandı`,queueCompleteDescription:`Tüm kuyruk işleri bitti`,quietHours:`Sessiz Saatler`,noNotificationsDuring:`Bu saatler arasında bildirim yok`,editProviderToChangeQuietHours:`Sessiz saatleri değiştirmek için sağlayıcıyı düzenleyin`,dailyDigest:`Günlük Özet`,batchNotifications:`Bildirimleri tek bir günlük özette topla`,sendAt:`{{time}}'de gönder`,editProviderToChangeDigestTime:`Özet saatini değiştirmek için sağlayıcıyı düzenleyin`,edit:`Düzenle`,deleteProvider:`Bildirim Sağlayıcısını Sil`,deleteConfirm:`"{{name}}" silmek istediğinizden emin misiniz? Bu geri alınamaz.`,delete:`Sil`,addTitle:`Bildirim Sağlayıcısı Ekle`,editTitle:`Bildirim Sağlayıcısını Düzenle`,nameLabel:`Ad *`,namePlaceholder:`Bildirimlerim`,providerTypeLabel:`Sağlayıcı Türü *`,configuration:`Yapılandırma`,testConfiguration:`Yapılandırmayı Test Et`,printerFilter:`Yazıcı Filtresi`,onlyFromPrinter:`Yalnızca bu yazıcının olayları için bildirim gönder`,quietHoursDnd:`Sessiz Saatler (Rahatsız Etme)`,quietStart:`Başlangıç`,quietEnd:`Bitiş`,dailyDigestLabel:`Günlük Özet`,sendDigestAt:`Özeti şu saatte gönder`,digestCollected:`Olaylar toplanacak ve bu saatte tek bir özet olarak gönderilecek`,notificationEvents:`Bildirim Olayları`,progressPercent:`(%25, %50, %75)`,bedCooledAfterPrint:`(baskı tamamlandıktan sonra)`,eventPriority:{sectionTitle:`ntfy Önceliği`,helpNtfy:`Her etkin olay için bir öncelik seçin. ntfy uyarıları kademelendirmek için bunları kullanır (ses, görünürlük, push davranışı). Burada ayarlanmamış seviyeler ntfy sunucu varsayılanını kullanır.`,min:`Min`,low:`Düşük`,default:`Varsayılan`,high:`Yüksek`,urgent:`Acil`},cancel:`İptal`,save:`Kaydet`,add:`Ekle`,nameRequired:`Ad gerekli`,fieldRequired:`{{field}} gerekli`,phoneNumber:`Telefon Numarası`,apiKey:`API Anahtarı`,serverUrl:`Sunucu URL`,topic:`Konu`,authToken:`Yetkilendirme Belirteci`,userKey:`Kullanıcı Anahtarı`,appToken:`Uygulama Belirteci`,priority:`Öncelik`,botToken:`Bot Belirteci`,chatId:`Sohbet ID`,smtpServer:`SMTP Sunucusu`,smtpPort:`SMTP Portu`,security:`Güvenlik`,authentication:`Kimlik Doğrulama`,username:`Kullanıcı Adı`,password:`Parola`,fromEmail:`Gönderen E-posta`,toEmail:`Alıcı E-posta`,webhookUrl:`Webhook URL`,payloadFormat:`Yük Formatı`,authorization:`Yetkilendirme`,titleFieldName:`Başlık Alanı Adı`,messageFieldName:`Mesaj Alanı Adı`,editTemplate:`Şablonu Düzenle: {{name}}`,titleLabel:`Başlık`,bodyLabel:`Gövde`,titlePlaceholder:`Bildirim başlığı...`,bodyPlaceholder:`Bildirim gövdesi...`,availableVariables:`Kullanılabilir Değişkenler`,clickToInsert:`Gövdede imleç konumuna eklemek için tıklayın`,livePreview:`Canlı Önizleme`,hide:`Gizle`,show:`Göster`,loadingPreview:`Önizleme yükleniyor...`,enterTemplateContent:`Önizlemeyi görmek için şablon içeriğini girin`,titlePreview:`Başlık:`,bodyPreview:`Gövde:`,resetToDefault:`Varsayılana Sıfırla`,titleRequired:`Başlık gerekli`,bodyRequired:`Gövde gerekli`,notificationLog:`Bildirim Günlüğü`,showFailedOnly:`Yalnızca başarısız`,last24Hours:`Son 24 saat`,last7Days:`Son 7 gün`,last30Days:`Son 30 gün`,last90Days:`Son 90 gün`,justNow:`Az önce`,noFailedNotifications:`Başarısız bildirim yok`,noNotificationsLogged:`Kaydedilen bildirim yok`,unknownProvider:`Bilinmeyen Sağlayıcı`,logTitle:`Başlık`,logMessage:`Mesaj`,logError:`Hata`,logProvider:`Sağlayıcı: {{type}}`,logTime:`Saat: {{time}}`,refresh:`Yenile`,clearOld:`Eskileri Temizle`,statsSummary:`Son {{days}} gün:`,statsNotifications:`bildirim`,statsSent:`{{count}} gönderildi`,statsFailed:`{{count}} başarısız`,eventTypes:{print_start:`Baskı Başladı`,print_complete:`Baskı Tamamlandı`,print_failed:`Baskı Başarısız`,print_stopped:`Baskı Durduruldu`,print_progress:`İlerleme`,printer_offline:`Yazıcı Çevrimdışı`,printer_error:`Yazıcı Hatası`,filament_low:`Az Filament`,maintenance_due:`Bakım Zamanı`,test:`Test`},userEmail:{title:`Bildirimler`,emailNotifications:`E-posta Bildirimleri`,emailNotificationsDesc:`Kendi baskı işleriniz için e-posta bildirimleri alın. E-postalar Gelişmiş Kimlik Doğrulamada yapılandırılan sistem SMTP ayarları kullanılarak gönderilir.`,sendingTo:`Bildirimler şuraya gönderilecek`,noEmailWarning:`Hesabınızın e-posta adresi yok. Eklemek için bir yöneticiyle iletişime geçin.`,printJobNotifications:`Baskı İşi Bildirimleri`,printJobNotificationsDesc:`Gönderdiğiniz baskı işleri için hangi olayların e-posta bildirimlerini tetikleyeceğini seçin.`,printJobStarts:`Baskı İşi Başlar`,printJobStartsDesc:`Baskı işiniz başladığında bildirim alın.`,printJobFinishes:`Baskı İşi Biter`,printJobFinishesDesc:`Baskı işiniz başarıyla tamamlandığında bildirim alın.`,printErrors:`Baskı Hataları`,printErrorsDesc:`Baskı işiniz başarısız olduğunda veya bir hatayla karşılaştığında bildirim alın.`,printJobStops:`Baskı İşi Durur`,printJobStopsDesc:`Baskı işiniz iptal edildiğinde veya durdurulduğunda bildirim alın.`,saveSuccess:`Bildirim tercihleri kaydedildi.`,saveError:`Bildirim tercihleri kaydedilemedi.`}},richTextEditor:{bold:`Kalın`,italic:`İtalik`,underline:`Altı Çizili`,bulletList:`Madde İşaretli Liste`,numberedList:`Numaralı Liste`,alignLeft:`Sola Hizala`,alignCenter:`Ortaya Hizala`,alignRight:`Sağa Hizala`,addLink:`Bağlantı Ekle`,removeLink:`Bağlantıyı Kaldır`},externalLinks:{title:`Kenar çubuğu bağlantıları`,sidebarLayout:`Kenar çubuğu`,sidebarLayoutDescription:`Yerleşik sayfaları gösterin veya gizleyin, harici bağlantılar ekleyin ve kenar çubuğu gezinmesini yeniden sıralamak için öğeleri sürükleyin.`,systemPages:`Bambuddy sayfaları`,externalLinks:`Harici bağlantılar`,visibleInSidebar:`Kenar çubuğunda görünür`,hiddenFromSidebar:`Kenar çubuğunda gizli`,requiredInSidebar:`Kenar çubuğunda gerekli`,hidePage:`Sayfayı gizle`,showPage:`Sayfayı göster`,settingsCannotBeHidden:`Ayarlar gizlenemez`,noLinksConfigured:`Yapılandırılmış harici bağlantı yok`,deleteLink:`Bağlantıyı Sil`,removeCustomIcon:`Özel simgeyi kaldır`,openInNewTab:`Yeni sekmede aç`,placeholders:{linkName:`Bağlantım`}},keyboardShortcuts:{title:`Klavye Kısayolları`,navigation:`Navigasyon`,archivesSection:`Arşivler`,kProfilesSection:`K-Profilleri`,generalSection:`Genel`,shortcuts:{goToPrinters:`Yazıcılara Git`,goToArchives:`Arşivlere Git`,goToQueue:`Kuyruğa Git`,goToStats:`İstatistiklere Git`,goToProfiles:`Bulut Profillerine Git`,goToSettings:`Ayarlara Git`,focusSearch:`Aramaya odaklan`,openUploadModal:`Yükleme modalini aç`,clearSelection:`Seçimi temizle / odağı kaldır`,contextMenu:`Kartlarda bağlam menüsü`,refreshProfiles:`Profilleri yenile`,newProfile:`Yeni profil`,exitSelectionMode:`Seçim modundan çık`,showHelp:`Bu yardımı göster`},footer:`Kapatmak için Esc'ye basın veya dışarı tıklayın`},notificationLog:{title:`Bildirim Günlüğü`,events:{printStarted:`Baskı Başladı`,printComplete:`Baskı Tamamlandı`,printFailed:`Baskı Başarısız`,printStopped:`Baskı Durduruldu`,progress:`İlerleme`,printerOffline:`Yazıcı Çevrimdışı`,printerError:`Yazıcı Hatası`,lowFilament:`Az Filament`,maintenanceDue:`Bakım Zamanı`,test:`Test`},timeAgo:{justNow:`Az önce`,minutesAgo:`{{minutes}}dk önce`,hoursAgo:`{{hours}}sa önce`}},restoreBackup:{title:`Yedeği Geri Yükle`,restoring:`Geri yükleniyor...`,restoreComplete:`Geri Yükleme Tamamlandı`,restoreFailed:`Geri Yükleme Başarısız`,importSettings:`Ayarları bir yedek dosyasından içe aktar`,pleaseWait:`Verileriniz geri yüklenirken lütfen bekleyin`,clickToSelect:`Yedek dosyası seçmek için tıklayın (.json veya .zip)`,howDuplicateHandling:`Yinelenen yönetiminin nasıl çalıştığı:`,categories:{printers:`Yazıcılar`,smartPlugs:`Akıllı Prizler`,notificationProviders:`Bildirim Sağlayıcıları`,filaments:`Filamentler`,archives:`Arşivler`,pendingUploads:`Bekleyen Yüklemeler`,settingsTemplates:`Ayarlar ve Şablonlar`},matchingInfo:{printers:`seri numarasına göre eşleşti`,smartPlugs:`IP adresine göre eşleşti`,notificationProviders:`ada göre eşleşti`,filaments:`ad + tür + markaya göre eşleşti`,archives:`içerik hash'ine göre eşleşti`,pendingUploads:`dosya adına göre eşleşti`,settingsTemplates:`her zaman üzerine yazılır`},replaceExisting:`Mevcut veriyi değiştir`,keepExisting:`Mevcut veriyi koru`,replaceDescription:`Zaten mevcut olan öğeleri yedek verisiyle üzerine yaz`,keepDescription:`Yalnızca zaten mevcut olmayan öğeleri geri yükle`,caution:`Dikkat:`,cautionText:`Üzerine yazma, mevcut yapılandırmalarınızı yedek verisiyle değiştirecek. Güvenlik için yazıcı erişim kodları asla üzerine yazılmaz.`,itemsRestored:`Geri Yüklenen Öğeler`,itemsSkipped:`Atlanan Öğeler`,restored:`Geri yüklendi`,skipped:`Atlandı (zaten mevcut)`,filesLabel:`Dosyalar (3MF, küçük resimler, vb.)`,newApiKeysGenerated:`Yeni API Anahtarları Oluşturuldu`,newApiKeysWarning:`Bu anahtarlar yalnızca bir kez gösterilir. Şimdi kopyalayın!`,processingBackup:`Yedek dosyası işleniyor...`,noDataFound:`Yedek dosyasında geri yüklenecek veri bulunamadı.`,failedToRestore:`Yedek geri yüklenemedi. Lütfen dosya formatını kontrol edin.`},backupExport:{title:`Yedeği Dışa Aktar`,selectData:`Dahil edilecek veriyi seçin`,selectAll:`Tümünü Seç`,selectNone:`Hiçbirini Seçme`,categoryDescriptions:{settings:`Dil, tema, güncelleme tercihleri`,notifications:`ntfy, Pushover, Discord, vb.`,templates:`Özel mesaj şablonları`,smartPlugs:`Tasmota priz yapılandırmaları`,externalLinks:`Harici servislere kenar çubuğu bağlantıları`,printers:`Yazıcı bilgisi (erişim kodları hariç)`,plateDetection:`Boş plaka referans görüntüleri`,filaments:`Filament türleri ve maliyetleri`,maintenance:`Özel bakım programları`,archives:`Tüm baskı verileri + dosyalar (3MF, küçük resimler, fotoğraflar)`,projects:`Projeler, BOM öğeleri ve ekler`,pendingUploads:`İnceleme bekleyen sanal yazıcı yüklemeleri`,apiKeys:`Webhook API anahtarları (içe aktarımda yeni anahtarlar oluşturulur)`},requiresPrinters:`Yazıcıların seçili olması gerekir`,zipFileWarning:`ZIP dosyası oluşturulacak.`,zipFileDescription:`Tüm 3MF dosyalarını, küçük resimleri, zaman atlamalı videoları ve fotoğrafları içerir. Bu biraz zaman alabilir ve büyük bir dosya oluşturabilir.`,includeAccessCodes:`Erişim Kodlarını Dahil Et`,includeAccessCodesDescription:`Başka bir makineye aktarmak için`,includeAccessCodesWarning:`Erişim kodları düz metin olarak dahil edilecek. Bu yedek dosyasını güvende tutun!`,categoriesSelected:`{{selectedCount}} kategori seçildi`},pendingUploads:{placeholders:{notes:`Bu baskı hakkında notlar ekleyin...`},discardUpload:`Yüklemeyi At`,archiveAllUploads:`Tüm Yüklemeleri Arşivle`,discardAllUploads:`Tüm Yüklemeleri At`,archive:`Arşivle`,timeAgo:{justNow:`Az önce`,minutesAgo:`{{minutes}}dk önce`,hoursAgo:`{{hours}}sa önce`,daysAgo:`{{days}}g önce`}},apiBrowser:{placeholders:{requestBody:`JSON istek gövdesi...`,searchEndpoints:`Uç noktalarda ara...`}},configureAmsSlot:{title:`AMS Yuvasını Yapılandır`,slotConfigured:`Yuva Yapılandırıldı!`,configuringSlot:`Yuva yapılandırılıyor:`,slotLabel:`{{ams}} Yuva {{slot}}`,searchPresets:`Ön ayarlarda ara...`,colorPlaceholder:`Renk adı veya hex (örn., kahverengi, FF8800)`,clearCustomColor:`Özel rengi temizle`,noCloudPresets:`Bulut ön ayarı yok. Senkronize etmek için Bambu Cloud'a giriş yapın.`,noPresetsAvailable:`Kullanılabilir ön ayar yok. Bambu Cloud'a giriş yapın veya yerel profilleri içe aktarın.`,noMatchingPresets:`Eşleşen ön ayar bulunamadı.`,custom:`Özel`,builtin:`Yerleşik`,orcaCloud:`Orca Cloud`,bambuCloud:`Bambu Cloud`,settingsSentToPrinter:`Ayarlar yazıcıya gönderildi`,filamentProfile:`Filament Profili`,kProfileLabel:`K Profili (Basınç İlerlemesi)`,filteringFor:`Şu için filtreleniyor: {{material}}`,noKProfile:`K profili yok (varsayılan 0.020 kullan)`,noMatchingKProfiles:`Eşleşen K profili bulunamadı. Varsayılan K=0.020 kullanılacak.`,selectFilamentFirst:`Önce bir filament profili seçin`,kFromCalibration:`Yazıcı kalibrasyonundan K={{value}}`,customColorLabel:`Özel Renk (isteğe bağlı)`,presetColors:`{{name}} renkleri:`,showLessColors:`Daha az renk göster`,showMoreColors:`Daha fazla renk göster`,clear:`Temizle`,hexLabel:`Hex: #{{hex}}`,resetting:`Sıfırlanıyor...`,resetSlot:`Yuvayı Sıfırla`,cancel:`İptal`,configuring:`Yapılandırılıyor...`,configureSlot:`Yuvayı Yapılandır`},githubBackup:{title:`Git Yedekleme`,history:`Geçmiş`,downloadBackup:`Yedeği İndir`,restoreBackup:`Yedeği Geri Yükle`,noBackupsYet:`Henüz yedek yok`},emailSettings:{placeholders:{fromName:`BamBuddy`}},tagManagement:{searchTags:`Etiketlerde ara...`,renameTag:`Etiketi yeniden adlandır`,deleteTag:`Etiketi sil`},notificationTemplates:{placeholders:{title:`Bildirim başlığı...`,body:`Bildirim gövdesi...`}},batchTag:{placeholders:{newTag:`Yeni etiket girin...`}},photoGallery:{deletePhoto:`Fotoğrafı Sil`},filamentHoverCard:{copySpoolUuid:`Makara UUID'sini kopyala`},kProfilesView:{hasNote:`Notu var`,copyProfile:`Profili kopyala`},layout:{openMenu:`Menüyü aç`,noPermissionSystemInfo:`Sistem bilgisini görüntüleme izniniz yok`},dashboard:{dragToReorder:`Yeniden sıralamak için sürükleyin`,hideWidget:`Widget'ı gizle`},notificationProviderCard:{deleteNotificationProvider:`Bildirim Sağlayıcısını Sil`},fileManagerModal:{closeFileManager:`Dosya yöneticisini kapat`,sortFiles:`Dosyaları sırala`,goToParentFolder:`Üst klasöre git`,threeView:`3B Görünüm`},embeddedCameraViewer:{refreshStream:`Akışı yenile`,close:`Kapat`,zoomOut:`Uzaklaştır`,resetZoom:`Yakınlaştırmayı sıfırla`,zoomIn:`Yakınlaştır`,dragToResize:`Yeniden boyutlandırmak için sürükleyin`},timelapseViewer:{skipBack5s:`5 sn geri al`,skipForward5s:`5 sn ileri al`},notificationProviders:{descriptions:{email:`SMTP e-posta bildirimleri`,telegram:`Telegram botu üzerinden bildirimler`,discord:`Webhook üzerinden Discord kanalına gönder`,ntfy:`Ücretsiz, kendi barındırılabilir push bildirimleri`,pushover:`Basit, güvenilir push bildirimleri`,callmebot:`CallMeBot üzerinden ücretsiz WhatsApp bildirimleri`,webhook:`Herhangi bir URL'ye genel HTTP POST`}},logViewer:{searchPlaceholder:`Mesaj veya günlükçü adı ara...`,noLogEntries:`Günlük kaydı bulunamadı`},switchbarPopover:{noSwitchesInSwitchbar:`Anahtar çubuğunda anahtar yok`},projectPageModal:{placeholders:{title:`Başlık`,designer:`Tasarımcı`,license:`Lisans`,description:`Açıklama girin...`,profileTitle:`Profil Başlığı`,profileDescription:`Profil açıklaması...`}},spoolmanSettings:{},time:{unknown:`-`,waiting:`Bekliyor`,justNow:`Az önce`,now:`Şimdi`,minsAgo:`{{count}}dk önce`,inMins:`{{count}}dk sonra`,hoursAgo:`{{count}}sa önce`,inHours:`{{count}}sa sonra`,daysAgo:`{{count}}g önce`,inDays:`{{count}}g sonra`},spoolbuddy:{nav:{dashboard:`Gösterge Paneli`,ams:`AMS`,inventory:`Envanter`,writeTag:`Yaz`,settings:`Ayarlar`},status:{nfcReady:`NFC Hazır`,nfcOff:`NFC Kapalı`,offline:`Çevrimdışı`,online:`Çevrimiçi`,noPrinters:`Yazıcı yok`,deviceOffline:`Cihaz Çevrimdışı`,waitingConnection:`Cihaz bağlantısı bekleniyor...`,systemReady:`Sistem Hazır`,status:`Durum`},dashboard:{readyToScan:`Taramaya hazır`,idleMessage:`Tanımlamak için bir makarayı tartıya yerleştirin`,nfcHint:`NFC etiketi otomatik olarak okunacak`,device:`Cihaz`,syncWeight:`Ağırlığı Senkronize Et`,weightSynced:`Senkronize edildi!`,unknownTag:`Bilinmeyen Etiket`,newTag:`Yeni Etiket Algılandı`,onScale:`tartıda`,linkSpool:`Makaraya Bağla`,linkTagTitle:`Etiketi Makaraya Bağla`,linkTag:`Etiketi Bağla`,selectSpool:`Bu etiketi bağlamak için bir makara seçin:`,noUntagged:`Etiketsiz makara bulunamadı`,tagDetected:`Etiket algılandı`,noTag:`Etiket yok`,tagId:`Etiket`,grossWeight:`Brüt ağırlık`,spoolSize:`Makara boyutu`,close:`Kapat`,currentSpool:`Mevcut Makara`,plateReady:`Plaka hazır: {{name}}`,plateReadyLabel:`Temizlenmeye hazır plakalar`,plateClearAction:`Temizle`,plateClearedToast:`Plaka temizlendi olarak işaretlendi`,plateClearFailed:`Plaka temizlendi olarak işaretlenemedi`},modal:{spoolDetected:`Makara Algılandı`,assignToAms:`AMS'e Ata`,syncWeight:`Ağırlığı Senkronize Et`,weightSynced:`Senkronize edildi!`,syncing:`Senkronize ediliyor...`,newTagDetected:`Yeni Etiket Algılandı`,addToInventory:`Envantere Ekle`,assignToAmsTitle:`AMS'e Ata`,selectSlot:`Bir yuva seçin`,assign:`Ata`,assigning:`Atanıyor...`,assignSuccess:`Atandı!`,assignPendingInsert:`Atandı. Makarayı yerleştirdiğinizde yuva yapılandırılacak.`,assignError:`Makara atanamadı. Lütfen tekrar deneyin.`,noPrinterSelected:`Bir yazıcı seçin...`,noAmsDetected:`Bu yazıcıda AMS algılanmadı`,slot:`Yuva`},weight:{noReading:`Okuma yok`,stable:`Kararlı`,measuring:`Ölçülüyor...`,tare:`Dara`,calibrate:`Kalibre Et`},spool:{remaining:`Kalan`,material:`Malzeme`,brand:`Marka`,color:`Renk`,coreWeight:`Çekirdek`,labelWeight:`Etiket`,scaleWeight:`Tartı`,netWeight:`Net`,lastUsed:`Son kullanım`},ams:{noData:`AMS algılanmadı`,connectAms:`Filament yuvalarını görmek için bir AMS bağlayın`,noPrinter:`Yazıcı seçilmedi`,selectPrinter:`Üst çubuktan bir yazıcı seçin`,printerDisconnected:`Yazıcı bağlantısı kesildi`,humidity:`Nem`,level:`Seviye`,active:`Aktif`,slot:`Yuva`,empty:`Boş`},inventory:{search:`Makaralarda ara...`,empty:`Envanterde makara yok`,noResults:`Eşleşen makara yok`,spools:`makara`,addSpool:`Makara Ekle`},settings:{tabDevice:`Cihaz`,tabDisplay:`Görüntü`,tabScale:`Tartı`,tabUpdates:`Güncellemeler`,nfcReader:`NFC Okuyucu`,type:`Tür`,connection:`Bağlantı`,notConnected:`N/A`,deviceInfo:`Cihaz Bilgisi`,hostname:`Ana Bilgisayar`,uptime:`Çalışma Süresi`,systemConfig:`Arka Uç ve Kimlik Doğrulama`,backendUrl:`Bambuddy Arka Uç URL'si`,apiToken:`API Belirteci`,apiTokenPlaceholder:`API belirtecini girin`,saveConfig:`Yapılandırmayı Kaydet`,systemQueued:`Yapılandırma kuyruğa alındı.`,nfcDiagnostic:`NFC Tanılaması`,scaleDiagnostic:`Tartı Tanılaması`,readTagDiagnostic:`Etiket Okuma Tanılaması`,testNfc:`Okuyucuyu test et`,testScale:`Doğruluğu test et`,testReadTag:`Etiket oku`,systemFieldsRequired:`Arka uç URL'si gerekli.`,brightness:`Parlaklık`,saved:`Kaydedildi`,noBacklight:`DSI arka ışık algılanmadı. Parlaklık kontrolü DSI ekran gerektirir.`,screenBlank:`Ekran Kapanma Zaman Aşımı`,screenBlankDesc:`Hareketsizlik sonrası ekran kapanır. Uyandırmak için dokunun.`,displayNote:`Parlaklık bir yazılım filtresi olarak uygulanır.`,scaleCalibration:`Tartı Kalibrasyonu`,currentWeight:`Mevcut ağırlık`,tareOffset:`Dara`,calFactor:`Faktör`,knownWeight:`Bilinen ağırlık`,calStep1:`Tartıdan tüm öğeleri kaldırın ve Sıfır Ayarla'ya basın.`,calStep2:`Bilinen ağırlığı tartıya yerleştirin.`,setZero:`Sıfır Ayarla`,calibrateNow:`Kalibre Et`,calibrated:`Kalibre edildi`,tareSet:`Dara komutu gönderildi. Cihaz bekleniyor...`,tareComplete:`Dara tamam!`,tareTimedOut:`Dara zaman aşımına uğradı — SpoolBuddy daemon çalışıyor mu?`,tareFailed:`Dara komutu gönderilemedi`,zeroSet:`Sıfır noktası ayarlandı. Bilinen ağırlığı tartıya yerleştirin.`,calibrationDone:`Kalibrasyon tamamlandı!`,calibrationFailed:`Kalibrasyon başarısız`,lastCalibrated:`Son kalibrasyon`,stable:`Kararlı`,settling:`Sabitleniyor...`,firmware:`Firmware`,scale:`Tartı`,noDevice:`SpoolBuddy cihazı bulunamadı`,daemonVersion:`Daemon Sürümü`,currentVersion:`Mevcut`,versionPending:`Daemon bekleniyor...`,checking:`Kontrol ediliyor...`,checkUpdates:`Güncellemeleri Kontrol Et`,updateAvailable:`Güncelleme mevcut`,updateInstructions:`SSH üzerinden güncelle: yükseltmek için SpoolBuddy yükleme betiğini çalıştırın.`,upToDate:`Güncel`,includeBeta:`Beta sürümleri dahil et`},writeTag:{tabExisting:`Mevcut Makara`,tabNew:`Yeni Makara`,tabReplace:`Etiketi Değiştir`,searchPlaceholder:`Malzeme, renk, marka ile ara...`,noUntaggedSpools:`Etiketsiz makara yok`,noTaggedSpools:`Etiketli makara yok`,selectSpool:`Bir makara seçin, ardından okuyucuya boş bir NTAG yerleştirin`,placeTag:`Okuyucuya bir NTAG yerleştirin`,tagReady:`Etiket algılandı — yazmaya hazır`,writeTag:`Etiketi Yaz`,replaceTag:`Etiketi Değiştir`,writing:`Etiket yazılıyor...`,waiting:`SpoolBuddy bekleniyor...`,writeSuccess:`Etiket başarıyla yazıldı!`,writeFailed:`Yazma başarısız`,queueFailed:`Yazma komutu kuyruğa alınamadı`,tryAgain:`Tekrar Dene`,cancel:`İptal`,replaceWarning:`Eski etiket bağlantısı kaldırılacak. Yeni etiket yerini alacak.`,deviceOffline:`SpoolBuddy çevrimdışı`,material:`Malzeme`,colorName:`Renk Adı`,color:`Renk`,brand:`Marka`,weight:`Ağırlık (g)`,createSpool:`Makara Oluştur`,creating:`Oluşturuluyor...`,spoolCreated:`Makara oluşturuldu! Yazmaya hazır.`,createFailed:`Makara oluşturulamadı`,incompleteDataWarning:`Etiket eksik Spoolman verisiyle yazıldı`},quickMenu:{printerPower:`Yazıcı Gücü`,systemControls:`Sistem`,restartDaemon:`Daemon'u Yeniden Başlat`,restartBrowser:`Tarayıcıyı Yeniden Başlat`,reboot:`Yeniden Başlat`,shutdown:`Kapat`,swipeToClose:`Kapatmak için aşağı kaydır`,confirmTitle:`Onayla`,confirmShutdown:`SpoolBuddy'yi kapatmak istediğinizden emin misiniz? Tekrar açmak için fiziksel erişime ihtiyacınız olacak.`,confirmReboot:`SpoolBuddy'yi yeniden başlatmak istediğinizden emin misiniz?`,confirmRestartDaemon:`SpoolBuddy daemon yeniden başlatılsın mı? NFC ve tartı geçici olarak kullanılamayacak.`,confirmRestartBrowser:`Kiosk tarayıcısı yeniden başlatılsın mı? Ekran kısa bir süre kararacak.`,confirm:`Onayla`,confirmPlugOn:`{{name}} açılsın mı?`,confirmPlugOff:`{{name}} kapatılsın mı?`,turnOn:`Aç`,turnOff:`Kapat`}},diagnostic:{modalTitle:`Bağlantı tanılaması — {{name}}`,running:`Tanılama çalışıyor...`,runningElapsed:`Tanılama çalışıyor... ({{elapsed}}s)`,waitingForReportHint:`Yazıcının durum raporu yayınlamasını bekliyor — bu işlem en fazla {{max}} saniye sürebilir.`,runFailed:`Tanılama çalıştırılamadı: {{error}}`,retry:`Tekrar çalıştır`,runButton:`Tanılamayı çalıştır`,sectionTitle:`Bağlantı Tanılaması`,sectionDescription:`Bir yazıcının neden bağlanmadığını veya yazdırmadığını kontrol edin — port erişilebilirliği, LAN geliştirici modu, Docker ağ modu ve kimlik bilgileri.`,noPrinters:`Yapılandırılmış yazıcı yok.`,overall:{ok:`Sorun bulunamadı — yazıcı bağlantısı sağlıklı görünüyor.`,warnings:`Yazıcı çalışmalı, ancak bazı şeyler dikkat gerektiriyor.`,problems:`Yazıcının neden bağlanmadığını veya yazdırmadığını açıklayan sorunlar bulundu.`},check:{port_mqtt:{title:`Kontrol portu (MQTT 8883)`,pass:`Erişilebilir — yazıcı kontrol bağlantılarını kabul ediyor.`,fail:`Port 8883 erişilemez. Yazıcı kapalı, farklı bir IP adresinde veya bir güvenlik duvarı engelliyor. Yazıcı IP'sini ve hiçbir şeyin port 8883'ü engellemediğini doğrulayın.`},port_ftps:{title:`Dosya aktarım portu (FTPS 990)`,pass:`Erişilebilir — baskı dosyaları gönderme çalışacak.`,warn:`Port 990 erişilemez. İzleme yine çalışabilir, ancak yazıcıya baskı gönderme başarısız olacak. Port 990'ın engellenmediğinden emin olun.`},external_storage:{title:`Gönderilen dosyaları harici depolamada sakla (kurulum adımı 4)`,pass:`Yazıcı bu seçeneğin açık olduğunu bildiriyor — gönderilen dosyalar SD kartta saklanacak ve arşivler küçük resim ve dilimleyici meta verileri içerecek.`,fail:`Yazıcı bu seçeneğin kapalı olduğunu bildiriyor. "Gönderilen dosyaları harici depolamada sakla" seçeneğini etkinleştirin — yeni donanım yazılımlarında (P2S 01.02 / Bambu Studio 2.6+) düğme yazıcının Baskı Ayarları'nda; eski sürümlerde Bambu Studio / OrcaSlicer'in Cihaz sekmesindedir. Bu seçenek olmadan, arşivlenen her baskıda küçük resim ve dilimleyici meta verisi olmayacak.`,skip:`Kontrol edilmedi — etkin bir MQTT bağlantısı gerekli. Bu ayarın yalnızca dilimleyicide bulunduğu eski dilimleyicilerde yazıcı bunu bildirmez, bu nedenle seçenek kapalı olsa bile bu kontrol geçer — kurulum adımı 4'ü manuel olarak doğrulayın.`},port_rtsps:{title:`Kamera portu (RTSPS 322)`,pass:`Erişilebilir — kamera akışı çalışacak.`,warn:`Port 322 erişilemez. Canlı kamera görünümü çalışmayacak. Bu, baskıyı etkilemez.`},network_mode:{title:`Docker ağ modu`,pass:`Ana bilgisayar ağ modunda çalışıyor.`,warn:`Bambuddy, Docker köprü ağı kullanılarak çalışıyor. Yazıcı keşfi ve Sanal Yazıcı, ana bilgisayar ağ modu gerektirir — konteyneri "network_mode: host" ile yeniden oluşturun.`,skip:`Docker'da çalışmıyor — uygulanamaz.`},subnet:{title:`Ağ alt ağı`,pass:`Yazıcı ve Bambuddy aynı alt ağda.`,warn:`Yazıcı ({{printer_ip}}) ve Bambuddy ({{host_ip}}) farklı alt ağlarda. Alt ağlar arasında yönlendirme yapılandırılmazsa birbirlerine erişemeyebilirler.`,skip:`Alt ağ belirlenemedi — atlandı.`},mqtt_auth:{title:`Yazıcı kimlik bilgileri`,pass:`Yazıcı bağlantıyı kabul etti.`,fail:`Yazıcı erişilebilir ancak bağlantıyı reddetti. Büyük olasılıkla erişim kodu veya seri numarası yanlış. Erişim kodu, Geliştirici Modu her açılıp kapatıldığında değişir — yazıcı ekranından yeniden kopyalayın.`,skip:`Kontrol edilmedi — yazıcıya erişilemedi.`},developer_mode:{title:`LAN Geliştirici Modu`,pass:`Geliştirici Modu etkin.`,fail:`Yazıcıda Geliştirici Modu KAPALI. Yazıcının LAN ayarlarında etkinleştirin — ve OK ile onaylayın. Bu olmadan baskılar başlamayacak.`,skip:`Kontrol edilemedi — yazıcıya canlı bir bağlantı gerektirir.`},printer_publishing:{title:`Yazıcı durum yayını yapıyor`,pass:`Yazıcı durum güncellemelerini yayınlıyor — AMS, filamentler ve K profilleri dilimleyiciye doğru şekilde yansıtılacak.`,fail:`MQTT aracısı bağlantıyı kabul etti, ancak yazıcı hiç durum raporu yayınlamadı. Bu neredeyse her zaman yanlış ya da büyük/küçük harf hatalı bir seri numarasından kaynaklanır — device//report konusu büyük/küçük harfe duyarlıdır. Yazıcı ayarlarındaki seri numarasını cihazın ekranındaki ile karşılaştırarak doğrulayın.`,skip:`Kontrol edilemedi — yazıcıya canlı bir bağlantı gerektirir.`}}},systemHealth:{sectionTitle:`Sistem Sağlığı`,sectionDescription:`Bir destek talebine dönüşmeden önce genellikle kendi başınıza düzeltebileceğiniz bilinen sorunlar için son günlükleri tarar.`,rescan:`Yeniden tara`,clean:`Son {{times}} günlük kaydında bilinen sorun bulunamadı.`,logUnavailable:`Dosya günlüğü devre dışı, bu nedenle günlükler taranamıyor. Bu kontrolü kullanmak için dosya günlüğünü etkinleştirin.`,learnMore:`Nasıl düzeltilir`,fixLabel:`Düzeltme:`,occurrences:`{{times}}× görüldü — son {{lastSeen}}'de`,category:{layer8:`Bunu düzeltebilirsiniz`,environment:`Ortam`,bug:`Lütfen bunu bildirin`},signature:{"ftp-auth-rejected":{name:`Yazıcı erişim kodunu reddetti`,cause:`Yazıcı dosya aktarım girişini reddetti. Erişim kodu yanlış veya Geliştirici Modu açılıp kapatıldıktan sonra değişti.`,fix:`Erişim kodunu yazıcı ekranından (LAN ayarları) yeniden kopyalayın ve Bambuddy'deki yazıcının ayarlarında güncelleyin.`},"ftp-connection-timeout":{name:`Dosya aktarım bağlantısı zaman aşımına uğradı`,cause:`Bambuddy yazıcının dosya aktarım portuna (FTPS 990) erişemedi. Port engellendi veya yazıcı kapalı ya da başka bir alt ağda.`,fix:`Bambuddy ile yazıcı arasında hiçbir şeyin port 990'ı engellemediğinden ve her ikisinin de aynı ağda olduğundan emin olun.`},"ftp-ssl-error":{name:`Güvenli dosya aktarım el sıkışması başarısız`,cause:`Yazıcının dosya aktarım sunucusuyla TLS el sıkışması başarısız oldu. Bu genellikle bir güvenlik duvarı veya eski yazıcı firmware'idir.`,fix:`Yazıcı firmware'ini güncelleyin ve port 990'daki bağlantıyı hiçbir güvenlik duvarı veya proxy'nin engellemediğini kontrol edin.`},"mqtt-connection-flapping":{name:`Yazıcı bağlantısı sürekli düşüyor`,cause:`Kontrol bağlantısı (MQTT 8883) tekrar tekrar bağlantısı kesiliyor ve yeniden bağlanıyor — genellikle zayıf bir ağ yolu veya kısmen engellenmiş bir port.`,fix:`Yazıcıdaki Wi-Fi sinyalini kontrol edin, kablolu bağlantı tercih edin ve port 8883'ün güvenilir bir şekilde erişilebilir olduğundan emin olun.`},"camera-connection-refused":{name:`Kamera akışına erişilemez`,cause:`Canlı kameraya RTSPS 322 portunda erişilemedi. Port engellendi veya yazıcıda kamera veya LAN canlı görünümü kapalı.`,fix:`Yazıcıda kamerayı ve LAN canlı görünümünü etkinleştirin ve port 322'nin engellenmediğinden emin olun. Bu, baskıyı etkilemez.`},"database-locked":{name:`Veritabanı yazma çekişmesi`,cause:`SQLite veritabanı yük altında "veritabanı kilitli" hatalarıyla karşılaşıyor — aynı anda birkaç yazıcı çalıştırırken yaygındır.`,fix:`Bambuddy'yi harici bir PostgreSQL veritabanına geçirin. Dokümantasyondaki PostgreSQL kılavuzuna bakın.`}}},vpDiagnostic:{title:`Kurulum kontrolü — {{name}}`,runButton:`Kurulum kontrolünü çalıştır`,running:`Kurulum kontrolü çalışıyor...`,runFailed:`Kurulum kontrolü çalıştırılamadı: {{error}}`,retry:`Tekrar çalıştır`,overall:{ok:`Tüm kontroller geçti — bu sanal yazıcı doğru şekilde kurulmuş.`,warnings:`Sanal yazıcı çalışmalı, ancak bazı şeyler dikkat gerektiriyor.`,problems:`Dilimleyicinin bu sanal yazıcıyı neden göremediğini veya kullanamadığını açıklayan sorunlar bulundu.`},check:{enabled:{title:`Sanal yazıcı etkin`,fail:`Bu sanal yazıcı kapatılmış. Keşfedilebilir hale getirmek için açın.`},running:{title:`Servisler çalışıyor`,fail:`Sanal yazıcı etkin ancak servisleri çalışmıyor. Bambuddy günlüğünü kontrol edin — bir bind IP çakışması veya bir izin hatası genellikle onları durdurur.`},bind_interface:{title:`Bind ağ arayüzü`,fail:`Bind arayüzü ayarlanmamış veya artık bu ana bilgisayarda mevcut değil. Bind Arayüzü açılır menüsünde mevcut bir arayüz seçin.`},access_code:{title:`Erişim kodu ayarlandı`,fail:`Erişim kodu ayarlanmamış. Dilimleyiciye burada ayarladığınız aynı 8 karakterli erişim kodunun verilmesi gerekir.`},target_printer:{title:`Hedef yazıcı`,fail:`Hedef yazıcı seçilmemiş. Proxy modu iletmek için gerçek bir yazıcıya ihtiyaç duyar.`,warn:`Hedef yazıcı şu anda çevrimdışı — yeniden bağlandığında proxy devam edecek.`},port_ftps:{title:`Dosya yükleme servisi (port {{port}})`,fail:`Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyici dosya yükleyemez. Bu arayüzde bir port çakışması genellikle nedendir.`},port_mqtt:{title:`Kontrol servisi (port {{port}})`,fail:`Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyici bağlanamaz veya durum gösteremez.`},port_bind:{title:`Keşif servisi (port {{port}})`,fail:`Bind IP'sinin {{port}} portunda hiçbir şey dinlemiyor, bu nedenle dilimleyicinin keşif el sıkışması başarısız oluyor.`},certificate:{title:`TLS sertifikası`,pass:`Sertifika hazır. Bambuddy CA sertifikasının (yukarıda) dilimleyicinizin güven deposuna içe aktarıldığından emin olun.`,fail:`Bu sanal yazıcı için TLS sertifikası eksik. Bambuddy veri dizininin yazılabilir olduğunu kontrol edin.`}}},bugReport:{title:`Hata Bildir`,description:`Açıklama`,descriptionPlaceholder:`Ne ters gitti? Lütfen sorunu tanımlayın...`,email:`E-posta (isteğe bağlı)`,emailPlaceholder:`sizin@email.com`,emailPrivacy:`Sağlanırsa, e-postanız GitHub sorunundaki daraltılmış bir bölümde dahil edilecek, böylece bakımcı takip edebilir.`,screenshot:`Ekran Görüntüsü`,uploadOrPaste:`Bir görüntü yükleyin, yapıştırın veya sürükleyin`,dataCollectedSummary:`Rapora hangi veriler dahil edilir?`,dataIncluded:`Dahil:`,dataIncludedList:`Uygulama sürümü, OS, mimari, Python sürümü, veritabanı istatistikleri (yalnızca sayılar), yazıcı modelleri, nozul sayıları, firmware sürümleri, bağlantı durumu, entegrasyon durumu (Spoolman, MQTT, HA), hassas olmayan ayarlar, ağ arayüzü sayısı, Docker ayrıntıları, bağımlılık sürümleri.`,dataNeverIncluded:`Asla dahil edilmez:`,dataNeverIncludedList:`Yazıcı adları, seri numaraları, erişim kodları, parolalar, IP adresleri, e-posta adresleri, API anahtarları, belirteçler, webhook URL'leri, ana bilgisayar adları veya kullanıcı adları.`,submit:`Gönder`,startLogging:`Hata Ayıklama Kaydını Başlat`,stepEnableLogging:`Hata ayıklama kaydı etkin`,stepReproduce:`Sorunu şimdi yeniden oluşturun`,stepStopLogging:`Durdur ve raporu gönder`,stopAndSubmit:`Durdur ve Gönder`,maxDuration:`{{minutes}} dk sonra otomatik durur`,stoppingLogs:`Günlükler toplanıyor ve gönderiliyor...`,submitting:`Hata raporu gönderiliyor...`,submittingStepConnection:`Yazıcı bağlantı kontrolleri çalıştırılıyor`,submittingStepVirtualPrinters:`Sanal yazıcı kurulum kontrolleri çalıştırılıyor`,submittingStepLogScan:`Son günlüklerde bilinen sorunlar taranıyor`,submittingStepSubmit:`Rapor GitHub'a gönderiliyor`,submitSuccess:`Hata raporu başarıyla gönderildi!`,submitFailed:`Hata raporu gönderilemedi`,diagnosticChecking:`Yazıcı bağlantıları kontrol ediliyor...`,diagnosticHealthy:`Bağlantı kontrolü başarılı — yazıcılarınızda sorun bulunamadı.`,diagnosticSummary:`{{total}} yazıcıdan {{problems}} tanesinde bağlantı sorunu var`,diagnosticIntro:`Bir veya daha fazla yazıcının sorununuza neden olabilecek bir bağlantı sorunu var. Düzeltmeyi görmek için aşağıda bir yazıcıyı genişletin — bunu çözmek, hata raporu olmadan sorunu çözebilir. Yine de aşağıda bir rapor gönderebilirsiniz.`,logHealthSummary:`Günlüklerinizde bilinen sorunlar bulundu`,logHealthIntro:`Son günlükler bilinen sorunlarla eşleşiyor. Aşağıdaki düzeltmeleri kontrol edin — bunları çözmek, hata raporu olmadan sorununuzu çözebilir. Yine de aşağıda bir rapor gönderebilirsiniz.`,thankYou:`Teşekkürler!`,submitted:`Hata raporunuz gönderildi.`,viewIssue:`Sorunu Görüntüle`,unexpectedError:`Beklenmedik bir hata oluştu`},failureDetection:{title:`AI Başarısızlık Algılama`,description:`Baskıları kendi barındırılan bir Obico ML API ile izle ve algılanan başarısızlıklara otomatik olarak yanıt ver.`,mlUrl:`Obico ML API URL'si`,mlUrlHint:`Kendi barındırılan Obico ml_api konteynerinizin temel URL'si (örn. http://192.168.1.10:3333).`,test:`Test`,testSuccess:`ML API erişilebilir ve sağlıklı.`,testFailed:`ML API'ye erişilemedi.`,sensitivity:`Hassasiyet`,sensitivityLow:`Düşük (daha az yanlış pozitif)`,sensitivityMedium:`Orta (dengeli)`,sensitivityHigh:`Yüksek (erken algıla, daha fazla yanlış pozitif)`,sensitivityHint:`Uyarıları ve başarısızlıkları tetikleyen güven eşiklerini ayarlar.`,action:`Algılanan başarısızlıkta eylem`,actionNotify:`Yalnızca bildir`,actionPause:`Baskıyı duraklat`,actionPauseOff:`Duraklat ve gücü kes`,pollInterval:`Sorgulama aralığı (saniye)`,pollIntervalHint:`Baskı yaparken her yazıcının ne sıklıkta kontrol edileceği. Minimum 5sn, maksimum 120sn.`,externalUrlMissing:`Harici URL ayarlanmamış.`,externalUrlHint:`ML API, kamera anlık görüntüsünü URL üzerinden alır. ML API konteyneri Bambuddy'ye erişebilsin diye Genel ayarlarda Harici URL'yi ayarlayın.`,perPrinterTitle:`İzlenen Yazıcılar`,perPrinterHint:`Algılama servisinin hangi yazıcıları izleyeceğini seçin.`,monitorAll:`Tüm bağlı yazıcıları izle`,statusTitle:`Durum`,serviceRunning:`Servis çalışıyor`,thresholds:`Düşük / Yüksek eşikler`,activePrinters:`Aktif baskılar`,noActivePrints:`Şu anda çalışan baskı yok.`,historyTitle:`Son Algılamalar`,noHistory:`Henüz algılama yok.`},makerworld:{title:`MakerWorld`,description:`Bambu Handy uygulamasına gitmeden — doğrudan Bambuddy'den içe aktarmak ve yazdırmak için bir MakerWorld model URL'si yapıştırın.`,pasteUrlHeader:`MakerWorld'den İçe Aktar`,pasteUrlPlaceholder:`https://makerworld.com/en/models/… veya herhangi bir MakerWorld bağlantısını yapıştırın`,resolveButton:`Çöz`,signInRequiredTitle:`İndirme için Bambu Cloud girişi gerekli`,signInRequiredBody:`Model ayrıntılarına anonim olarak göz atabilirsiniz, ancak MakerWorld 3MF dosyalarını indirmek için bir Bambu Cloud hesabı gerektirir.`,openCloudSettings:`Bulut ayarlarını aç`,untitledModel:`Adsız model`,byCreator:`{{name}} tarafından`,downloadsCount:`{{count}} indirme`,licensePrefix:`Lisans`,alreadyImported:`Zaten kütüphanede`,openOnMakerworld:`MakerWorld'de aç`,alreadyInLibrary:`Bu model zaten kütüphanenizde — Dosya Yöneticisi → MakerWorld'de bulun`,importSuccess:`{{filename}} içe aktarıldı — Dosya Yöneticisi → MakerWorld'e kaydedildi`,platesHeader:`Plakalar ({{count}})`,plateDefaultName:`Plaka {{n}}`,materialCount:`{{count}} filament`,amsRequired:`AMS gerekli`,slicedFor:`{{printer}} için dilimlendi`,alsoCompatible:`Ayrıca uyumlu olarak işaretlendi: {{printers}}`,importToLibrary:`Kaydet`,sliceIn:`Kaydet ve {{slicer}}'de Dilimle`,disclaimer:`MakerWorld entegrasyonu topluluk tarafından belgelenen API uç noktalarını kullanır. Bambuddy, MakerWorld veya Bambu Lab ile ilişkili veya onaylı değildir.`,lastImportSuccess:`Kütüphanenize içe aktarıldı`,lastImportAlreadyInLibrary:`Zaten kütüphanenizde`,viewInLibrary:`Dosya Yöneticisinde Görüntüle`,openInBambuStudio:`Bambu Studio'da Aç`,openInOrcaSlicer:`OrcaSlicer'da Aç`,importTo:`Dosya yöneticisine içe aktar`,recentImportsHeader:`Son içe aktarımlar`,phaseResolving:`Çözülüyor`,phaseDownloading:`İndiriliyor`,folderAuto:`MakerWorld (varsayılan)`,importAll:`Tümünü içe aktar`,importAllProgress:`{{current}}/{{total}} içe aktarılıyor`,openGallery:`Görüntü galerisini aç`,galleryPrev:`Önceki görüntü`,galleryNext:`Sonraki görüntü`,deleteImport:`Kütüphaneden kaldır`,importDeleting:`Kaldırılıyor…`,importDeleted:`Kütüphaneden kaldırıldı`,confirmDelete:`{{filename}} kütüphaneden kaldırılsın mı? Bu, yerel dosyayı siler ancak plaka MakerWorld'den yeniden içe aktarılabilir.`,errors:{resolveFailed:`O MakerWorld URL'si çözülemedi.`,downloadFailed:`İndirme başarısız. Lütfen tekrar deneyin.`,deleteFailed:`Dosya kütüphaneden kaldırılamadı.`}},gcodeViewer:{back:`Geri`,backToArchives:`Baskı Arşivlerine Dön`,backToFiles:`Dosya Yöneticisine Dön`},libraryTrash:{title:`Çöp Kutusu`,headerButton:`Çöp`,headerTooltip:`Çöpe taşınan dosyaları görüntüle`,backToFiles:`Dosya Yöneticisine Dön`,subtitleAdmin:`Silinen dosyalar burada {{days}} gün kalır, ardından otomatik silinir. Bu görünüm tüm kullanıcılar için çöpteki dosyaları gösterir.`,subtitleUser:`Silinen dosyalar burada {{days}} gün kalır, ardından otomatik silinir.`,loading:`Çöp yükleniyor…`,loadError:`Çöp yüklenemedi.`,empty:`Çöp boş.`,summary:`{{count}} dosya · {{size}}`,emptyTrash:`Çöpü boşalt`,restore:`Geri Yükle`,purgeNow:`Şimdi sil`,autoPurgeIn:`{{when}} içinde otomatik silinir`,days:`gün`,retentionLabel:`Otomatik sil`,selectAll:`Tümünü seç`,selectOne:`{{filename}} seç`,selectionCount:`{{count}} seçildi`,bulkRestore:`Seçilenleri geri yükle`,bulkPurge:`Seçilenleri sil`,col:{filename:`Dosya`,folder:`Klasör`,size:`Boyut`,deleted:`Çöpe taşındı`,autoPurge:`Otomatik silinir`,owner:`Sahip`,actions:`İşlemler`},confirm:{purgeTitle:`Kalıcı olarak silinsin mi?`,purgeBody:`{{filename}} diskten silinecek ve geri yüklenemeyecek.`,emptyTitle:`Çöp boşaltılsın mı?`,emptyBody:`Tüm {{count}} dosya diskten silinecek. Bu geri alınamaz.`,bulkPurgeTitle:`Seçili dosyalar kalıcı olarak silinsin mi?`,bulkPurgeBody:`Seçili {{count}} dosya diskten silinecek ve geri yüklenemeyecek.`,cta:`Kalıcı olarak sil`},toast:{restored:`Dosya geri yüklendi.`,restoreFailed:`Dosya geri yüklenemedi.`,purged:`Dosya kalıcı olarak silindi.`,purgeFailed:`Dosya silinemedi.`,emptied:`{{count}} dosya çöpten silindi.`,emptyFailed:`Çöp boşaltılamadı.`,retentionSaved:`Otomatik silme {{days}} gün olarak ayarlandı.`,retentionFailed:`Saklama ayarı kaydedilemedi.`,bulkRestored:`{{count}} dosya geri yüklendi.`,bulkPurged:`{{count}} dosya silindi.`}},libraryPurge:{title:`Eski dosyaları temizle`,headerButton:`Eskileri temizle`,headerTooltip:`Eski dosyaları toplu olarak çöpe taşı`,description:`Kütüphanenizden eski dosyaları tek seferde temizleyin. Baskı geçmişi olan dosyalar son baskı tarihlerine göre, hiç yazdırılmamış dosyalar yükleme tarihlerine göre yaşlandırılır.`,ageLabel:`Şundan eski dosyaları taşı`,days:`gün`,includeNeverPrinted:`Hiç yazdırılmamış dosyaları dahil et`,effectsTitle:`Temizle'ye tıkladığınızda ne olur`,effect1:`Eşleşen dosyalar Çöp'e taşınır — henüz diskten silinmezler.`,effect2:`Saklama penceresi sona erene kadar Çöp'ten herhangi bir zamanda geri yükleyebilirsiniz.`,effect3:`Saklama sonrası, çöp süpürücü onları kalıcı olarak diskten kaldırır.`,effect4:`Harici (bağlı) klasörlerdeki dosyalar atlanır — Bambuddy asla sahibi olmadığı bayt'ları silmez.`,previewLoading:`Kaç dosyanın eşleştiği kontrol ediliyor…`,previewFailed:`Temizleme önizlenemedi.`,previewSummary:`{{count}} dosya · {{size}} çöpe taşınacak`,andMore:`…ve {{count}} daha`,warning:`Çöpe taşınan dosyalar saklama penceresi sona erene kadar depolama alanını kullanmaya devam eder. Diski hemen boşaltmak için sonradan Çöp'ü boşaltın.`,confirmCta:`{{count}} dosyayı çöpe taşı`,purging:`Çöpe taşınıyor…`,toast:{success:`{{count}} dosya çöpe taşındı.`,failed:`Dosyalar temizlenemedi.`}},libraryAutoPurge:{enableLabel:`Eski dosyaları otomatik temizle`,enableDescription:`Yönetici temizliğini günde bir kez çalıştırır. Dosyalar önce Çöp'e gider — hemen silinmezler.`,ageLabel:`Şundan eski dosyaları otomatik temizle`,ageDescription:`Minimum 7 gün, maksimum 10 yıl. Manuel Temizle düğmesiyle aynı yaş kuralını kullanır.`,days:`gün`,includeNeverPrinted:`Hiç yazdırılmamış dosyaları dahil et`,saveFailed:`Otomatik temizleme ayarları kaydedilemedi.`},archivePurge:{headerButton:`Eskileri temizle`,headerTooltip:`Eski arşivleri toplu olarak sil`,title:`Eski arşivleri temizle`,description:`Eski baskı geçmişini temizleyin. Her arşiv en son baskı tamamlamasına göre yaşlandırılır — bir arşivi yeniden yazdırmak yaşını yeniler, bu nedenle aktif çalışma asla temizlenmez.`,ageLabel:`Son şu kadar günde yazdırılmamış arşivleri sil`,days:`gün`,effectsTitle:`Temizle'ye tıkladığınızda ne olur`,effect1:`Eşleşen her arşiv listelerden gizlenir ve dosyaları diskten kaldırılır (3MF, küçük resim, zaman atlamalı video, kaynak 3MF, F3D tasarım dosyası, fotoğraflar).`,effect2:`Arşiv satırı veritabanında kalır, böylece Hızlı İstatistikler filament, süre, maliyet ve enerji katkısını korur — tek arşiv silme varsayılanı ile aynı.`,effect3:`Hızlı İstatistik katkısını da kaldırmak için aşağıdaki "Ayrıca istatistiklerden kaldır"ı işaretleyin (tek arşiv silme seçeneğiyle eşleşir). O yol geri alınamaz.`,effect4:`Bir arşivi yeniden yazdırmak yaş saatini yeniler, bu nedenle hâlâ kullandığınız arşivler güvendedir.`,purgeStatsLabel:`Ayrıca istatistiklerden kaldır`,purgeStatsHint:`Eşleşen arşivleri Hızlı İstatistiklerden (filament, süre, maliyet, enerji) düşürür. Bu olmadan, Hızlı İstatistikler her katkıyı korur ve yalnızca dosyalar diskten ayrılır.`,previewLoading:`Kaç arşivin eşleştiği kontrol ediliyor…`,previewFailed:`Temizleme önizlenemedi.`,previewSummary:`{{count}} arşiv · {{size}} kaldırılacak`,andMore:`…ve {{count}} daha`,warning:`Dosyalar diskten kaldırılır ve geri yüklenemez. Devam etmeden önce saklamak istediğiniz her şeyi indirin veya favoriye ekleyin.`,confirmCta:`{{count}} arşivi kaldır`,purging:`Kaldırılıyor…`,toast:{success:`{{count}} arşiv kaldırıldı.`,failed:`Arşivler temizlenemedi.`}},archiveAutoPurge:{enableLabel:`Eski arşivleri otomatik temizle`,enableDescription:`Günde bir kez, eşik içinde yazdırılmamışsa arşivleri listelerden gizler ve dosyalarını diskten kaldırır. Bir arşivi yeniden yazdırmak saati sıfırlar.`,ageLabel:`Son şu kadar günde yazdırılmamış arşivleri otomatik sil`,ageDescription:`Minimum 7 gün, maksimum 10 yıl. En son baskı tamamlamasına göre — bir arşivi yeniden yazdırmak yaşını yeniler. 3MF, küçük resim, zaman atlamalı video, kaynak 3MF, F3D ve fotoğrafları kaldırır.`,days:`gün`,purgeStatsLabel:`Ayrıca istatistiklerden kaldır`,purgeStatsDescription:`Etkinleştirildiğinde, günlük süpürücü her temizlenen arşivi de Hızlı İstatistiklerden (filament, süre, maliyet, enerji) düşürür. Varsayılan kapalı — Hızlı İstatistikler katkıyı korur, yalnızca dosyalar diskten ayrılır.`,runNow:`Arşivleri şimdi temizle`,saveFailed:`Otomatik temizleme ayarları kaydedilemedi.`},cameraTokens:{title:`Kamera API Belirteçleri`,navTitle:`Kamera API belirteçleri`,description:`Kamera akışını Home Assistant, Frigate, kiosklar veya kararlı bir URL'ye ihtiyaç duyan başka herhangi bir araca gömmek için uzun ömürlü belirteçler. Her belirteç yalnızca kamera akışı içindir ve herhangi bir zamanda iptal edilebilir.`,loading:`Yükleniyor…`,confirmRevoke:{title:`Bu belirteç iptal edilsin mi?`,body:`"{{name}}" kullanan herhangi bir cihaz hemen erişimini kaybedecek. Bu geri alınamaz.`,cancel:`İptal`,confirm:`İptal Et`},create:{title:`Yeni belirteç oluştur`,nameLabel:`Belirteç adı`,namePlaceholder:`örn. Home Assistant`,daysLabel:`Sona erene kadar gün`,submit:`Oluştur`,hint:`Maksimum ömür 365 gün. Belirteç değeri oluşturmada yalnızca bir kez gösterilir — şimdi kopyalayın.`},created:{title:`Belirteç oluşturuldu — şimdi kopyalayın`,warning:`Bu, bu belirtecin görünür olacağı tek seferdir. Bu iletişim kutusunu kapattıktan sonra onu bir daha asla görüntüleyemezsiniz.`,copy:`Kopyala`,dismiss:`Kaydettim`},list:{myTitle:`Belirteçlerim`,allTitle:`Tüm kullanıcılar (yönetici görünümü)`,empty:`Henüz belirteç yok.`,name:`Ad`,owner:`Sahip`,prefix:`Önek`,created:`Oluşturuldu`,expires:`Sona Erer`,lastUsed:`Son kullanım`,revoke:`İptal Et`,expired:`Süresi Doldu`},toast:{created:`Belirteç oluşturuldu`,createFailed:`Belirteç oluşturulamadı`,revoked:`Belirteç iptal edildi`,revokeFailed:`Belirteç iptal edilemedi`,loadFailed:`Belirteçler yüklenemedi`,copied:`Panoya kopyalandı`,copyFailed:`Kopyalama başarısız — manuel olarak seçip kopyalayın`}},forecast:{title:`Tahmin`,noSpools:`Aktif makara bulunamadı. Tahmin verisini görmek için envanterinize makara ekleyin.`,noUsageData:`Kullanım verisi mevcut değil — stok zaman çizelgesi öngörülemiyor.`,sku:`SKU`,material:`Malzeme`,stock:`Stok`,dailyRate:`Oran`,daysLeft:`Kalan Gün`,emptyBy:`Şu Tarihte Boş`,reorderBy:`Şu Tarihte Sipariş`,actions:`İşlemler`,trend:`Trend`,estimated:`Tahmini`,noData:`Veri yok`,timeframe:`Zaman Aralığı`,chartTitle:`Öngörülen Stok — İlk 5 Malzeme`,dashedLinesROP:`Kesik çizgiler = yeniden sipariş noktaları`,stockLevel:`Stok Seviyesi`,reorderPoint:`Yeniden Sipariş Noktası`,safetyMargin:`Güvenlik Marjı`,trendLegend:`Trend (geçmiş tabanlı, %95 servis seviyesi)`,estimatedLegend:`Tahmini (ağırlık farkı)`,noDataLegend:`Veri yok`,ropLabel:`ROP`,ssLabel:`SS`,safetyStockLegend:`Güvenlik stoku`,stockArrivalLegend:`Stok varışı`,stockoutLegend:`Stok tükenmesi`,alertCount_one:`{{count}} uyarı`,alertCount_other:`{{count}} uyarı`,order:`Sipariş`,save:`Kaydet`,cancel:`İptal`,settingsSaved:`Ayarlar kaydedildi`,failedSaveSettings:`Ayarlar kaydedilemedi`,globalLeadTimeSaved:`Global teslim süresi kaydedildi`,globalLeadTime:`Global teslim süresi`,globalLeadTimeHint:`Global teslim süresi tabanı — tüm SKU'lar için yeniden sipariş noktası hesaplamasında kullanılır`,skuLeadTimeOverride:`SKU Teslim Süresi Geçersiz Kılma`,skuLeadTimeHint:`0 = global teslim süresini kullan. Bu SKU için geçersiz kılmak için >0 ayarlayın.`,safetyMarginLabel:`Güvenlik Marjı`,effectiveLeadTime:`Etkili Teslim Süresi`,effectiveLeadTimeHint:`max(global {{global}}g, SKU {{sku}}g)`,reorderPointHint:`d̄ × LT + güvenlik marjı — stok bu seviyeye geldiğinde sipariş ver`,safetyMarginHint:`İstatistiksel güvenlik stoku (z=1.65 × σ × √LT) + kullanıcı tanımlı tampon`,safetyMarginHintDays:`İstatistiksel güvenlik stokunun üzerine eklenen tampon.{{approx}}`,safetyMarginHintDaysApprox:` ≈ mevcut oranda {{g}}g.`,safetyMarginHintG:`İstatistiksel güvenlik stokunun üzerine eklenen sabit ağırlık tamponu.{{approx}}`,safetyMarginHintGApprox:` ≈ mevcut oranda {{days}}g.`,individualSpools:`Bireysel makaralar`,labelWeight:`Etiket`,spoolCount_one:`{{count}} makara`,spoolCount_other:`{{count}} makara`,stockBreakRisk:`Stok tükenme riski`,stockBreakDetail:`{{days}}g kaldı, teslim süresi {{lt}}g.`,stockBreakBefore:`Yenileme öncesi stok tükenmesi`,reorderNow:`Şimdi sipariş ver`,reorderTriggerPassed:`Tetikleyici tarih {{date}} geçti.`,shoppingList:`Alışveriş Listesi`,shoppingListItems_one:`({{count}} öğe)`,shoppingListItems_other:`({{count}} öğe)`,shoppingListEmpty:`Alışveriş listesi boş. Öğe eklemek için herhangi bir satırdaki sepet simgesine tıklayın.`,addToCart:`Alışveriş listesine ekle`,alertsSnoozed:`Bu SKU için uyarıları sustur`,alertsEnabled:`Bu SKU için uyarıları aç`,addedToCart:`Alışveriş listesine eklendi`,failedAddItem:`Öğe eklenemedi`,listView:`Liste`,logisticsView:`Lojistik`,qty:`Adet`,weight:`Ağırlık`,leadTime:`Teslim Süresi`,expectedRestock:`Beklenen Yenileme`,status:`Durum`,note:`Not`,pending:`Beklemede`,purchased:`Satın Alındı`,received:`Teslim Alındı`,markPurchased:`Satın alındı olarak işaretle`,markReceived:`Teslim alındı olarak işaretle — makaraları Stok envanterine ekler`,resetToPending:`Beklemeye sıfırla`,remove:`Kaldır`,clearAll:`Tümünü temizle`,downloadCsv:`CSV`,addToCartTitle:`Alışveriş Listesine Ekle`,byQuantity:`Miktara Göre`,byDuration:`Süreye Göre`,numberOfSpools:`Makara sayısı`,lastHowManyDays:`Kaç gün dayanmalı?`,noUsageQty:`Kullanım verisi yok — miktar 1 olarak ayarlandı.`,noteOptional:`Not (isteğe bağlı)`,notePlaceholder:`örn. X projesi için, acil…`,addNSpools_one:`{{count}} makara ekle`,addNSpools_other:`{{count}} makara ekle`,onArrival:`Varışta`,stockBreakIn:`{{days}}g içinde stok tükenmesi.`,stockRunsOutBefore:`{{lt}}g teslim süresi dolmadan önce stok tükenir.`,atRate:`{{rate}}g/gün oranında size gerekli`,moreSpools_one:`{{count}} daha makara`,moreSpools_other:`{{count}} daha makara`,bridgeGap:`boşluğu kapatmak için.`,noReadAccess:`Envanter tahminlerini görüntüleme izniniz yok.`,noWriteAccess:`Tahmin ayarlarını değiştirme izniniz yok.`}}}},Tt=[`en`,`de`,`es`,`fr`,`ja`,`it`,`ko`,`pt-BR`,`tr`,`zh-CN`,`zh-TW`],Et=`bambuddy_appliance_locale_consumed`;Ee.use(Ct).use(Ge).init({resources:wt,fallbackLng:`en`,supportedLngs:Tt,detection:{order:[`localStorage`,`navigator`,`htmlTag`],lookupLocalStorage:`bambutrack_language`,caches:[`localStorage`]},interpolation:{escapeValue:!1},react:{useSuspense:!1}});function Dt(){typeof window>`u`||!window.localStorage||window.localStorage.getItem(Et)||fetch(`/api/v1/system/appliance`).then(e=>e.ok?e.json():null).then(e=>{!e||typeof e.locale!=`string`||Tt.includes(e.locale)&&(Ee.changeLanguage(e.locale),window.localStorage.setItem(Et,`1`))}).catch(()=>{})}Dt();var Ot=[{code:`en`,name:`English`,nativeName:`English`},{code:`de`,name:`German`,nativeName:`Deutsch`},{code:`es`,name:`Spanish`,nativeName:`Español`},{code:`fr`,name:`French`,nativeName:`Français`},{code:`ja`,name:`Japanese`,nativeName:`日本語`},{code:`it`,name:`Italian`,nativeName:`Italiano`},{code:`ko`,name:`Korean`,nativeName:`한국어`},{code:`pt-BR`,name:`Portuguese (Brazil)`,nativeName:`Português (Brasil)`},{code:`zh-CN`,name:`Chinese (Simplified)`,nativeName:`简体中文`},{code:`zh-TW`,name:`Chinese (Traditional)`,nativeName:`繁體中文`},{code:`tr`,name:`Turkish`,nativeName:`Türkçe`}],kt=`modulepreload`,At=function(e){return`/`+e},jt={},Mt=function(e,t,n){let r=Promise.resolve();if(t&&t.length>0){let e=document.getElementsByTagName(`link`),i=document.querySelector(`meta[property=csp-nonce]`),a=i?.nonce||i?.getAttribute(`nonce`);function o(e){return Promise.all(e.map(e=>Promise.resolve(e).then(e=>({status:`fulfilled`,value:e}),e=>({status:`rejected`,reason:e}))))}r=o(t.map(t=>{if(t=At(t,n),t in jt)return;jt[t]=!0;let r=t.endsWith(`.css`),i=r?`[rel="stylesheet"]`:``;if(n)for(let n=e.length-1;n>=0;n--){let i=e[n];if(i.href===t&&(!r||i.rel===`stylesheet`))return}else if(document.querySelector(`link[href="${t}"]${i}`))return;let o=document.createElement(`link`);if(o.rel=r?`stylesheet`:kt,r||(o.as=`script`),o.crossOrigin=``,o.href=t,a&&o.setAttribute(`nonce`,a),document.head.appendChild(o),r)return new Promise((e,n)=>{o.addEventListener(`load`,e),o.addEventListener(`error`,()=>n(Error(`Unable to preload CSS for ${t}`)))})}))}function i(e){let t=new Event(`vite:preloadError`,{cancelable:!0});if(t.payload=e,window.dispatchEvent(t),!t.defaultPrevented)throw e}return r.then(t=>{for(let e of t||[])e.status===`rejected`&&i(e.reason);return e().catch(i)})},G=`popstate`;function Nt(e){return typeof e==`object`&&!!e&&`pathname`in e&&`search`in e&&`hash`in e&&`state`in e&&`key`in e}function Pt(e={}){function t(e,t){let n=t.state?.masked,{pathname:r,search:i,hash:a}=n||e.location;return zt(``,{pathname:r,search:i,hash:a},t.state&&t.state.usr||null,t.state&&t.state.key||`default`,n?{pathname:e.location.pathname,search:e.location.search,hash:e.location.hash}:void 0)}function n(e,t){return typeof t==`string`?t:Bt(t)}return Ht(t,n,null,e)}function Ft(e,t){if(e===!1||e==null)throw Error(t)}function It(e,t){if(!e){typeof console<`u`&&console.warn(t);try{throw Error(t)}catch{}}}function Lt(){return Math.random().toString(36).substring(2,10)}function Rt(e,t){return{usr:e.state,key:e.key,idx:t,masked:e.mask?{pathname:e.pathname,search:e.search,hash:e.hash}:void 0}}function zt(e,t,n=null,r,i){return{pathname:typeof e==`string`?e:e.pathname,search:``,hash:``,...typeof t==`string`?Vt(t):t,state:n,key:t&&t.key||r||Lt(),mask:i}}function Bt({pathname:e=`/`,search:t=``,hash:n=``}){return t&&t!==`?`&&(e+=t.charAt(0)===`?`?t:`?`+t),n&&n!==`#`&&(e+=n.charAt(0)===`#`?n:`#`+n),e}function Vt(e){let t={};if(e){let n=e.indexOf(`#`);n>=0&&(t.hash=e.substring(n),e=e.substring(0,n));let r=e.indexOf(`?`);r>=0&&(t.search=e.substring(r),e=e.substring(0,r)),e&&(t.pathname=e)}return t}function Ht(e,t,n,r={}){let{window:i=document.defaultView,v5Compat:a=!1}=r,o=i.history,s=`POP`,c=null,l=u();l??(l=0,o.replaceState({...o.state,idx:l},``));function u(){return(o.state||{idx:null}).idx}function d(){s=`POP`;let e=u(),t=e==null?null:e-l;l=e,c&&c({action:s,location:h.location,delta:t})}function f(e,t){s=`PUSH`;let r=Nt(e)?e:zt(h.location,e,t);n&&n(r,e),l=u()+1;let d=Rt(r,l),f=h.createHref(r.mask||r);try{o.pushState(d,``,f)}catch(e){if(e instanceof DOMException&&e.name===`DataCloneError`)throw e;i.location.assign(f)}a&&c&&c({action:s,location:h.location,delta:1})}function p(e,t){s=`REPLACE`;let r=Nt(e)?e:zt(h.location,e,t);n&&n(r,e),l=u();let i=Rt(r,l),d=h.createHref(r.mask||r);o.replaceState(i,``,d),a&&c&&c({action:s,location:h.location,delta:0})}function m(e){return Ut(i,e)}let h={get action(){return s},get location(){return e(i,o)},listen(e){if(c)throw Error(`A history only accepts one active listener`);return i.addEventListener(G,d),c=e,()=>{i.removeEventListener(G,d),c=null}},createHref(e){return t(i,e)},createURL:m,encodeLocation(e){let t=m(e);return{pathname:t.pathname,search:t.search,hash:t.hash}},push:f,replace:p,go(e){return o.go(e)}};return h}function Ut(e,t,n=!1){let r=`http://localhost`;e&&(r=e.location.origin===`null`?e.location.href:e.location.origin),Ft(r,`No window.location.(origin|href) available to create URL`);let i=typeof t==`string`?t:Bt(t);return i=i.replace(/ $/,`%20`),!n&&i.startsWith(`//`)&&(i=r+i),new URL(i,r)}function Wt(e,t,n=`/`){return Gt(e,t,n,!1)}function Gt(e,t,n,r,i){let a=dn((typeof t==`string`?Vt(t):t).pathname||`/`,n);if(a==null)return null;let o=i??qt(e),s=null,c=un(a);for(let e=0;s==null&&e{let c={relativePath:s===void 0?e.path||``:s,caseSensitive:e.caseSensitive===!0,childrenIndex:a,route:e};if(c.relativePath.startsWith(`/`)){if(!c.relativePath.startsWith(r)&&o)return;Ft(c.relativePath.startsWith(r),`Absolute route path "${c.relativePath}" nested under path "${r}" is not valid. An absolute child route path must start with the combined path of all its parent routes.`),c.relativePath=c.relativePath.slice(r.length)}let l=bn([r,c.relativePath]),u=n.concat(c);e.children&&e.children.length>0&&(Ft(e.index!==!0,`Index routes must not have child routes. Please remove all child routes from route path "${l}".`),Jt(e.children,t,u,l,o)),!(e.path==null&&!e.index)&&t.push({path:l,score:an(l,e.index),routesMeta:u})};return e.forEach((e,t)=>{if(e.path===``||!e.path?.includes(`?`))a(e,t);else for(let n of Yt(e.path))a(e,t,!0,n)}),t}function Yt(e){let t=e.split(`/`);if(t.length===0)return[];let[n,...r]=t,i=n.endsWith(`?`),a=n.replace(/\?$/,``);if(r.length===0)return i?[a,``]:[a];let o=Yt(r.join(`/`)),s=[];return s.push(...o.map(e=>e===``?a:[a,e].join(`/`))),i&&s.push(...o),s.map(t=>e.startsWith(`/`)&&t===``?`/`:t)}function Xt(e){e.sort((e,t)=>e.score===t.score?on(e.routesMeta.map(e=>e.childrenIndex),t.routesMeta.map(e=>e.childrenIndex)):t.score-e.score)}var Zt=/^:[\w-]+$/,Qt=3,$t=2,en=1,tn=10,nn=-2,rn=e=>e===`*`;function an(e,t){let n=e.split(`/`),r=n.length;return n.some(rn)&&(r+=nn),t&&(r+=$t),n.filter(e=>!rn(e)).reduce((e,t)=>e+(Zt.test(t)?Qt:t===``?en:tn),r)}function on(e,t){return e.length===t.length&&e.slice(0,-1).every((e,n)=>e===t[n])?e[e.length-1]-t[t.length-1]:0}function sn(e,t,n=!1){let{routesMeta:r}=e,i={},a=`/`,o=[];for(let e=0;e{if(t===`*`){let e=s[r]||``;o=a.slice(0,a.length-e.length).replace(/(.)\/+$/,`$1`)}let i=s[r];return n&&!i?e[t]=void 0:e[t]=(i||``).replace(/%2F/g,`/`),e},{}),pathname:a,pathnameBase:o,pattern:e}}function ln(e,t=!1,n=!0){It(e===`*`||!e.endsWith(`*`)||e.endsWith(`/*`),`Route path "${e}" will be treated as if it were "${e.replace(/\*$/,`/*`)}" because the \`*\` character must always follow a \`/\` in the pattern. To get rid of this warning, please change the route path to "${e.replace(/\*$/,`/*`)}".`);let r=[],i=`^`+e.replace(/\/*\*?$/,``).replace(/^\/*/,`/`).replace(/[\\.*+^${}|()[\]]/g,`\\$&`).replace(/\/:([\w-]+)(\?)?/g,(e,t,n,i,a)=>{if(r.push({paramName:t,isOptional:n!=null}),n){let t=a.charAt(i+e.length);return t&&t!==`/`?`/([^\\/]*)`:`(?:/([^\\/]*))?`}return`/([^\\/]+)`}).replace(/\/([\w-]+)\?(\/|$)/g,`(/$1)?$2`);return e.endsWith(`*`)?(r.push({paramName:`*`}),i+=e===`*`||e===`/*`?`(.*)$`:`(?:\\/(.+)|\\/*)$`):n?i+=`\\/*$`:e!==``&&e!==`/`&&(i+=`(?:(?=\\/|$))`),[new RegExp(i,t?void 0:`i`),r]}function un(e){try{return e.split(`/`).map(e=>decodeURIComponent(e).replace(/\//g,`%2F`)).join(`/`)}catch(t){return It(!1,`The URL path "${e}" could not be decoded because it is a malformed URL segment. This is probably due to a bad percent encoding (${t}).`),e}}function dn(e,t){if(t===`/`)return e;if(!e.toLowerCase().startsWith(t.toLowerCase()))return null;let n=t.endsWith(`/`)?t.length-1:t.length,r=e.charAt(n);return r&&r!==`/`?null:e.slice(n)||`/`}var fn=/^(?:[a-z][a-z0-9+.-]*:|\/\/)/i;function pn(e,t=`/`){let{pathname:n,search:r=``,hash:i=``}=typeof e==`string`?Vt(e):e,a;return n?(n=yn(n),a=n.startsWith(`/`)?mn(n.substring(1),`/`):mn(n,t)):a=t,{pathname:a,search:Cn(r),hash:wn(i)}}function mn(e,t){let n=xn(t).split(`/`);return e.split(`/`).forEach(e=>{e===`..`?n.length>1&&n.pop():e!==`.`&&n.push(e)}),n.length>1?n.join(`/`):`/`}function hn(e,t,n,r){return`Cannot include a '${e}' character in a manually specified \`to.${t}\` field [${JSON.stringify(r)}]. Please separate it out to the \`to.${n}\` field. Alternatively you may provide the full path as a string in and the router will parse it for you.`}function gn(e){return e.filter((e,t)=>t===0||e.route.path&&e.route.path.length>0)}function _n(e){let t=gn(e);return t.map((e,n)=>n===t.length-1?e.pathname:e.pathnameBase)}function vn(e,t,n,r=!1){let i;typeof e==`string`?i=Vt(e):(i={...e},Ft(!i.pathname||!i.pathname.includes(`?`),hn(`?`,`pathname`,`search`,i)),Ft(!i.pathname||!i.pathname.includes(`#`),hn(`#`,`pathname`,`hash`,i)),Ft(!i.search||!i.search.includes(`#`),hn(`#`,`search`,`hash`,i)));let a=e===``||i.pathname===``,o=a?`/`:i.pathname,s;if(o==null)s=n;else{let e=t.length-1;if(!r&&o.startsWith(`..`)){let t=o.split(`/`);for(;t[0]===`..`;)t.shift(),--e;i.pathname=t.join(`/`)}s=e>=0?t[e]:`/`}let c=pn(i,s),l=o&&o!==`/`&&o.endsWith(`/`),u=(a||o===`.`)&&n.endsWith(`/`);return!c.pathname.endsWith(`/`)&&(l||u)&&(c.pathname+=`/`),c}var yn=e=>e.replace(/\/\/+/g,`/`),bn=e=>yn(e.join(`/`)),xn=e=>e.replace(/\/+$/,``),Sn=e=>xn(e).replace(/^\/*/,`/`),Cn=e=>!e||e===`?`?``:e.startsWith(`?`)?e:`?`+e,wn=e=>!e||e===`#`?``:e.startsWith(`#`)?e:`#`+e,Tn=class{constructor(e,t,n,r=!1){this.status=e,this.statusText=t||``,this.internal=r,n instanceof Error?(this.data=n.toString(),this.error=n):this.data=n}};function En(e){return e!=null&&typeof e.status==`number`&&typeof e.statusText==`string`&&typeof e.internal==`boolean`&&`data`in e}function Dn(e){return bn(e.map(e=>e.route.path).filter(Boolean))||`/`}var On=typeof window<`u`&&window.document!==void 0&&window.document.createElement!==void 0;function kn(e,t){let n=e;if(typeof n!=`string`||!fn.test(n))return{absoluteURL:void 0,isExternal:!1,to:n};let r=n,i=!1;if(On)try{let e=new URL(window.location.href),r=n.startsWith(`//`)?new URL(e.protocol+n):new URL(n),a=dn(r.pathname,t);r.origin===e.origin&&a!=null?n=a+r.search+r.hash:i=!0}catch{It(!1,` contains an invalid URL which will probably break when clicked - please update to a valid URL path.`)}return{absoluteURL:r,isExternal:i,to:n}}Object.getOwnPropertyNames(Object.prototype).sort().join(`\0`);var An=[`POST`,`PUT`,`PATCH`,`DELETE`];new Set(An);var jn=[`GET`,...An];new Set(jn);var Mn=y.createContext(null);Mn.displayName=`DataRouter`;var Nn=y.createContext(null);Nn.displayName=`DataRouterState`;var Pn=y.createContext(!1);function Fn(){return y.useContext(Pn)}var In=y.createContext({isTransitioning:!1});In.displayName=`ViewTransition`;var Ln=y.createContext(new Map);Ln.displayName=`Fetchers`;var Rn=y.createContext(null);Rn.displayName=`Await`;var zn=y.createContext(null);zn.displayName=`Navigation`;var Bn=y.createContext(null);Bn.displayName=`Location`;var Vn=y.createContext({outlet:null,matches:[],isDataRoute:!1});Vn.displayName=`Route`;var Hn=y.createContext(null);Hn.displayName=`RouteError`;var Un=`REACT_ROUTER_ERROR`,Wn=`REDIRECT`,Gn=`ROUTE_ERROR_RESPONSE`;function Kn(e){if(e.startsWith(`${Un}:${Wn}:{`))try{let t=JSON.parse(e.slice(28));if(typeof t==`object`&&t&&typeof t.status==`number`&&typeof t.statusText==`string`&&typeof t.location==`string`&&typeof t.reloadDocument==`boolean`&&typeof t.replace==`boolean`)return t}catch{}}function qn(e){if(e.startsWith(`${Un}:${Gn}:{`))try{let t=JSON.parse(e.slice(40));if(typeof t==`object`&&t&&typeof t.status==`number`&&typeof t.statusText==`string`)return new Tn(t.status,t.statusText,t.data)}catch{}}function Jn(e,{relative:t}={}){Ft(Yn(),`useHref() may be used only in the context of a component.`);let{basename:n,navigator:r}=y.useContext(zn),{hash:i,pathname:a,search:o}=ar(e,{relative:t}),s=a;return n!==`/`&&(s=a===`/`?n:bn([n,a])),r.createHref({pathname:s,search:o,hash:i})}function Yn(){return y.useContext(Bn)!=null}function Xn(){return Ft(Yn(),`useLocation() may be used only in the context of a component.`),y.useContext(Bn).location}var Zn=`You should call navigate() in a React.useEffect(), not when your component is first rendered.`;function Qn(e){y.useContext(zn).static||y.useLayoutEffect(e)}function $n(){let{isDataRoute:e}=y.useContext(Vn);return e?wr():er()}function er(){Ft(Yn(),`useNavigate() may be used only in the context of a component.`);let e=y.useContext(Mn),{basename:t,navigator:n}=y.useContext(zn),{matches:r}=y.useContext(Vn),{pathname:i}=Xn(),a=JSON.stringify(_n(r)),o=y.useRef(!1);return Qn(()=>{o.current=!0}),y.useCallback((r,s={})=>{if(It(o.current,Zn),!o.current)return;if(typeof r==`number`){n.go(r);return}let c=vn(r,JSON.parse(a),i,s.relative===`path`);e==null&&t!==`/`&&(c.pathname=c.pathname===`/`?t:bn([t,c.pathname])),(s.replace?n.replace:n.push)(c,s.state,s)},[t,n,a,i,e])}var tr=y.createContext(null);function nr(){return y.useContext(tr)}function rr(e){let t=y.useContext(Vn).outlet;return y.useMemo(()=>t&&y.createElement(tr.Provider,{value:e},t),[t,e])}function ir(){let{matches:e}=y.useContext(Vn);return e[e.length-1]?.params??{}}function ar(e,{relative:t}={}){let{matches:n}=y.useContext(Vn),{pathname:r}=Xn(),i=JSON.stringify(_n(n));return y.useMemo(()=>vn(e,JSON.parse(i),r,t===`path`),[e,i,r,t])}function or(e,t){return sr(e,t)}function sr(e,t,n){Ft(Yn(),`useRoutes() may be used only in the context of a component.`);let{navigator:r}=y.useContext(zn),{matches:i}=y.useContext(Vn),a=i[i.length-1],o=a?a.params:{},s=a?a.pathname:`/`,c=a?a.pathnameBase:`/`,l=a&&a.route;{let e=l&&l.path||``;Er(s,!l||e.endsWith(`*`)||e.endsWith(`*?`),`You rendered descendant (or called \`useRoutes()\`) at "${s}" (under ) but the parent route path has no trailing "*". This means if you navigate deeper, the parent won't match anymore and therefore the child routes will never render. -Please change the parent to .`)}let u=Kn(),d;if(t){let e=typeof t==`string`?Lt(t):t;Mt(c===`/`||e.pathname?.startsWith(c),`When overriding the location using \`\` or \`useRoutes(routes, location)\`, the location pathname must begin with the portion of the URL pathname that was matched by all parent routes. The current pathname base is "${c}" but pathname "${e.pathname}" was given in the \`location\` prop.`),d=e}else d=u;let f=d.pathname||`/`,p=f;if(c!==`/`){let e=c.replace(/^\//,``).split(`/`);p=`/`+f.replace(/^\//,``).split(`/`).slice(e.length).join(`/`)}let m=n&&n.state.matches.length?n.state.matches.map(e=>Object.assign(e,{route:n.manifest[e.route.id]||e.route})):Bt(e,{pathname:p});G(l||m!=null,`No routes matched location "${d.pathname}${d.search}${d.hash}" `),G(m==null||m[m.length-1].route.element!==void 0||m[m.length-1].route.Component!==void 0||m[m.length-1].route.lazy!==void 0,`Matched leaf route at location "${d.pathname}${d.search}${d.hash}" does not have an element or Component. This means it will render an with a null value by default resulting in an "empty" page.`);let h=ur(m&&m.map(e=>Object.assign({},e,{params:Object.assign({},o,e.params),pathname:gn([c,r.encodeLocation?r.encodeLocation(e.pathname.replace(/%/g,`%25`).replace(/\?/g,`%3F`).replace(/#/g,`%23`)).pathname:e.pathname]),pathnameBase:e.pathnameBase===`/`?c:gn([c,r.encodeLocation?r.encodeLocation(e.pathnameBase.replace(/%/g,`%25`).replace(/\?/g,`%3F`).replace(/#/g,`%23`)).pathname:e.pathnameBase])})),i,n);return t&&h?y.createElement(In.Provider,{value:{location:{pathname:`/`,search:``,hash:``,state:null,key:`default`,mask:void 0,...d},navigationType:`POP`}},h):h}function ir(){let e=yr(),t=Sn(e)?`${e.status} ${e.statusText}`:e instanceof Error?e.message:JSON.stringify(e),n=e instanceof Error?e.stack:null,r=`rgba(200,200,200, 0.5)`,i={padding:`0.5rem`,backgroundColor:r},a={padding:`2px 4px`,backgroundColor:r},o=null;return console.error(`Error handled by React Router default ErrorBoundary:`,e),o=y.createElement(y.Fragment,null,y.createElement(`p`,null,`💿 Hey developer 👋`),y.createElement(`p`,null,`You can provide a way better UX than this when your app throws errors by providing your own `,y.createElement(`code`,{style:a},`ErrorBoundary`),` or`,` `,y.createElement(`code`,{style:a},`errorElement`),` prop on your route.`)),y.createElement(y.Fragment,null,y.createElement(`h2`,null,`Unexpected Application Error!`),y.createElement(`h3`,{style:{fontStyle:`italic`}},t),n?y.createElement(`pre`,{style:i},n):null,o)}var ar=y.createElement(ir,null),or=class extends y.Component{constructor(e){super(e),this.state={location:e.location,revalidation:e.revalidation,error:e.error}}static getDerivedStateFromError(e){return{error:e}}static getDerivedStateFromProps(e,t){return t.location!==e.location||t.revalidation!==`idle`&&e.revalidation===`idle`?{error:e.error,location:e.location,revalidation:e.revalidation}:{error:e.error===void 0?t.error:e.error,location:t.location,revalidation:e.revalidation||t.revalidation}}componentDidCatch(e,t){this.props.onError?this.props.onError(e,t):console.error(`React Router caught the following error during render`,e)}render(){let e=this.state.error;if(this.context&&typeof e==`object`&&e&&`digest`in e&&typeof e.digest==`string`){let t=Un(e.digest);t&&(e=t)}let t=e===void 0?this.props.children:y.createElement(Ln.Provider,{value:this.props.routeContext},y.createElement(Rn.Provider,{value:e,children:this.props.component}));return this.context?y.createElement(cr,{error:e},t):t}};or.contextType=An;var sr=new WeakMap;function cr({children:e,error:t}){let{basename:n}=y.useContext(Fn);if(typeof t==`object`&&t&&`digest`in t&&typeof t.digest==`string`){let e=Hn(t.digest);if(e){let r=sr.get(t);if(r)throw r;let i=Tn(e.location,n);if(wn&&!sr.get(t))if(i.isExternal||e.reloadDocument)window.location.href=i.absoluteURL||i.to;else{let n=Promise.resolve().then(()=>window.__reactRouterDataRouter.navigate(i.to,{replace:e.replace}));throw sr.set(t,n),n}return y.createElement(`meta`,{httpEquiv:`refresh`,content:`0;url=${i.absoluteURL||i.to}`})}}return e}function lr({routeContext:e,match:t,children:n}){let r=y.useContext(On);return r&&r.static&&r.staticContext&&(t.route.errorElement||t.route.ErrorBoundary)&&(r.staticContext._deepestRenderedBoundaryId=t.route.id),y.createElement(Ln.Provider,{value:e},n)}function ur(e,t=[],n){let r=n?.state;if(e==null){if(!r)return null;if(r.errors)e=r.matches;else if(t.length===0&&!r.initialized&&r.matches.length>0)e=r.matches;else return null}let i=e,a=r?.errors;if(a!=null){let e=i.findIndex(e=>e.route.id&&a?.[e.route.id]!==void 0);Mt(e>=0,`Could not find a matching route for errors on route IDs: ${Object.keys(a).join(`,`)}`),i=i.slice(0,Math.min(i.length,e+1))}let o=!1,s=-1;if(n&&r){o=r.renderFallback;for(let e=0;e=0?i.slice(0,s+1):[i[0]];break}}}}let c=n?.onError,l=r&&c?(e,t)=>{c(e,{location:r.location,params:r.matches?.[0]?.params??{},pattern:Cn(r.matches),errorInfo:t})}:void 0;return i.reduceRight((e,n,c)=>{let u,d=!1,f=null,p=null;r&&(u=a&&n.route.id?a[n.route.id]:void 0,f=n.route.errorElement||ar,o&&(s<0&&c===0?(Sr(`route-fallback`,!1,"No `HydrateFallback` element provided to render during initial hydration"),d=!0,p=null):s===c&&(d=!0,p=n.route.hydrateFallbackElement||null)));let m=t.concat(i.slice(0,c+1)),h=()=>{let t;return t=u?f:d?p:n.route.Component?y.createElement(n.route.Component,null):n.route.element?n.route.element:e,y.createElement(lr,{match:n,routeContext:{outlet:e,matches:m,isDataRoute:r!=null},children:t})};return r&&(n.route.ErrorBoundary||n.route.errorElement||c===0)?y.createElement(or,{location:r.location,revalidation:r.revalidation,component:f,error:u,children:h(),routeContext:{outlet:null,matches:m,isDataRoute:!0},onError:l}):h()},null)}function dr(e){return`${e} must be used within a data router. See https://reactrouter.com/en/main/routers/picking-a-router.`}function fr(e){let t=y.useContext(On);return Mt(t,dr(e)),t}function pr(e){let t=y.useContext(kn);return Mt(t,dr(e)),t}function mr(e){let t=y.useContext(Ln);return Mt(t,dr(e)),t}function hr(e){let t=mr(e),n=t.matches[t.matches.length-1];return Mt(n.route.id,`${e} can only be used on routes that contain a unique "id"`),n.route.id}function gr(){return hr(`useRouteId`)}function _r(){let e=pr(`useNavigation`);return y.useMemo(()=>{let{matches:t,historyAction:n,...r}=e.navigation;return r},[e.navigation])}function vr(){let{matches:e,loaderData:t}=pr(`useMatches`);return y.useMemo(()=>e.map(e=>Ht(e,t)),[e,t])}function yr(){let e=y.useContext(Rn),t=pr(`useRouteError`),n=hr(`useRouteError`);return e===void 0?t.errors?.[n]:e}function br(){let{router:e}=fr(`useNavigate`),t=hr(`useNavigate`),n=y.useRef(!1);return Jn(()=>{n.current=!0}),y.useCallback(async(r,i={})=>{G(n.current,qn),n.current&&(typeof r==`number`?await e.navigate(r):await e.navigate(r,{fromRouteId:t,...i}))},[e,t])}var xr={};function Sr(e,t,n){!t&&!xr[e]&&(xr[e]=!0,G(!1,n))}y.memo(Cr);function Cr({routes:e,manifest:t,future:n,state:r,isStatic:i,onError:a}){return rr(e,void 0,{manifest:t,state:r,isStatic:i,onError:a,future:n})}function wr({to:e,replace:t,state:n,relative:r}){Mt(Gn(),` may be used only in the context of a component.`);let{static:i}=y.useContext(Fn);G(!i,` must not be used on the initial render in a . This is a no-op, but you should modify your code so the is only ever rendered in response to some user interaction or state change.`);let{matches:a}=y.useContext(Ln),{pathname:o}=Kn(),s=Yn(),c=mn(e,pn(a),o,r===`path`),l=JSON.stringify(c);return y.useEffect(()=>{s(JSON.parse(l),{replace:t,state:n,relative:r})},[s,l,r,t,n]),null}function Tr(e){return $n(e.context)}function Er(e){Mt(!1,`A is only ever to be used as the child of element, never rendered directly. Please wrap your in a .`)}function Dr({basename:e=`/`,children:t=null,location:n,navigationType:r=`POP`,navigator:i,static:a=!1,useTransitions:o}){Mt(!Gn(),`You cannot render a inside another . You should never have more than one in your app.`);let s=e.replace(/^\/*/,`/`),c=y.useMemo(()=>({basename:s,navigator:i,static:a,useTransitions:o,future:{}}),[s,i,a,o]);typeof n==`string`&&(n=Lt(n));let{pathname:l=`/`,search:u=``,hash:d=``,state:f=null,key:p=`default`,mask:m}=n,h=y.useMemo(()=>{let e=sn(l,s);return e==null?null:{location:{pathname:e,search:u,hash:d,state:f,key:p,mask:m},navigationType:r}},[s,l,u,d,f,p,r,m]);return G(h!=null,` is not able to match the URL "${l}${u}${d}" because it does not start with the basename, so the won't render anything.`),h==null?null:y.createElement(Fn.Provider,{value:c},y.createElement(In.Provider,{children:t,value:h}))}function Or({children:e,location:t}){return nr(kr(e),t)}y.Component;function kr(e,t=[]){let n=[];return y.Children.forEach(e,(e,r)=>{if(!y.isValidElement(e))return;let i=[...t,r];if(e.type===y.Fragment){n.push.apply(n,kr(e.props.children,i));return}Mt(e.type===Er,`[${typeof e.type==`string`?e.type:e.type.name}] is not a component. All component children of must be a or `),Mt(!e.props.index||!e.props.children,`An index route cannot have child routes.`);let a={id:e.props.id||i.join(`-`),caseSensitive:e.props.caseSensitive,element:e.props.element,Component:e.props.Component,index:e.props.index,path:e.props.path,middleware:e.props.middleware,loader:e.props.loader,action:e.props.action,hydrateFallbackElement:e.props.hydrateFallbackElement,HydrateFallback:e.props.HydrateFallback,errorElement:e.props.errorElement,ErrorBoundary:e.props.ErrorBoundary,hasErrorBoundary:e.props.hasErrorBoundary===!0||e.props.ErrorBoundary!=null||e.props.errorElement!=null,shouldRevalidate:e.props.shouldRevalidate,handle:e.props.handle,lazy:e.props.lazy};e.props.children&&(a.children=kr(e.props.children,i)),n.push(a)}),n}var Ar=`get`,jr=`application/x-www-form-urlencoded`;function Mr(e){return typeof HTMLElement<`u`&&e instanceof HTMLElement}function Nr(e){return Mr(e)&&e.tagName.toLowerCase()===`button`}function Pr(e){return Mr(e)&&e.tagName.toLowerCase()===`form`}function Fr(e){return Mr(e)&&e.tagName.toLowerCase()===`input`}function Ir(e){return!!(e.metaKey||e.altKey||e.ctrlKey||e.shiftKey)}function Lr(e,t){return e.button===0&&(!t||t===`_self`)&&!Ir(e)}function Rr(e=``){return new URLSearchParams(typeof e==`string`||Array.isArray(e)||e instanceof URLSearchParams?e:Object.keys(e).reduce((t,n)=>{let r=e[n];return t.concat(Array.isArray(r)?r.map(e=>[n,e]):[[n,r]])},[]))}function zr(e,t){let n=Rr(e);return t&&t.forEach((e,r)=>{n.has(r)||t.getAll(r).forEach(e=>{n.append(r,e)})}),n}var Br=null;function Vr(){if(Br===null)try{new FormData(document.createElement(`form`),0),Br=!1}catch{Br=!0}return Br}var Hr=new Set([`application/x-www-form-urlencoded`,`multipart/form-data`,`text/plain`]);function Ur(e){return e!=null&&!Hr.has(e)?(G(!1,`"${e}" is not a valid \`encType\` for \`
\`/\`\` and will default to "${jr}"`),null):e}function Wr(e,t){let n,r,i,a,o;if(Pr(e)){let o=e.getAttribute(`action`);r=o?sn(o,t):null,n=e.getAttribute(`method`)||Ar,i=Ur(e.getAttribute(`enctype`))||jr,a=new FormData(e)}else if(Nr(e)||Fr(e)&&(e.type===`submit`||e.type===`image`)){let o=e.form;if(o==null)throw Error(`Cannot submit a