diff --git a/CHANGELOG.md b/CHANGELOG.md index 556066097..8ab014152 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -22,6 +22,9 @@ All notable changes to Bambuddy will be documented in this file. ### Changed - **Plate-Clear Confirmation Disabled by Default** — New installs ship with Settings → Workflow → "Require Plate-Clear Confirmation" off. Multiple new users reported queued prints appearing to not start because the prompt was waiting for acknowledgement; opt in from Workflow if you want the confirmation gate. +### Security +- **Dependency Updates for Published Advisories** — Bumped two dependencies flagged by vulnerability scanners. `python-multipart` 0.0.22 → 0.0.26 closes CVE-2026-40347 (GHSA-mj87-hwqh-73pj), a denial-of-service triggered by large preamble or epilogue data around a multipart boundary — the 0.0.26 release now skips the preamble before the first boundary and silently discards the epilogue after the closing one. Bambuddy uses `python-multipart` transitively through FastAPI/Starlette for form and file-upload parsing, so any authenticated endpoint accepting `multipart/form-data` (e.g. backup restore, project thumbnail upload) was exposed. `dompurify` 3.3.3 → 3.4.0 picks up the fix for GHSA-39q2-94rc-95cp (the function-form `ADD_TAGS` could bypass `FORBID_TAGS`); Bambuddy's two call sites (`ProjectDetailPage`, `ProjectPageModal`) only use array-form `ALLOWED_TAGS`/`ALLOWED_ATTR`, so the specific bypass was not reachable, but the bump still hardens the sanitizer against future misconfiguration and clears the audit warning. + ### Fixed - **Print Speed Icon Not Updating Live When Changed on Printer** ([#993](https://github.com/maziggy/bambuddy/issues/993)) — Changing the print speed mode from the printer's own panel (instead of from Bambuddy) did not update the speed icon on the Printers page card; the new value only appeared after a full page reload. The MQTT parser was already tracking `spd_lvl` and updating `state.speed_level` correctly, but the WebSocket serializer (`printer_state_to_dict`) was missing the field — so live status pushes never carried `speed_level`, and the frontend's merge-over-old-cache update left the icon stuck on its previous value. The REST `/status` endpoint used on initial page load already included it, which is why reloads worked. Added `speed_level` to the WebSocket payload. Thanks to @chesterakl for reporting. - **Camera Popup Shows "Valid camera stream token required" With Auth Enabled** ([#979](https://github.com/maziggy/bambuddy/issues/979)) — When Camera View Mode was set to "Window" and authentication was enabled, clicking the camera button opened a popup that immediately failed with `"Valid camera stream token required"`, while the embedded overlay kept working. Two root causes: (1) `window.open(...)` passed `noopener` in the popup features, which severed the opener link and prevented the browser from copying sessionStorage (where the auth token lives) into the popup — so the new window booted unauthenticated and the `POST /printers/camera/stream-token` fetch returned 401, leaving the `` src without the required `?token=` query param; (2) even once the token arrived, `CameraPage` computed its URL from the module-level stream-token cache on render and never re-rendered when the cache was updated in a `useEffect`, so the first paint locked in a tokenless URL that the backend kept rejecting. Fixed by dropping `noopener` from the camera popup features (same-origin, trusted window) so sessionStorage is inherited, subscribing `CameraPage` to the `camera-stream-token` React Query so it re-renders the moment the token resolves, and appending the token directly from the reactive query value instead of the effect-synced module cache — the `` src stays empty until the token is ready, so no tokenless request ever leaves the popup. Embedded-overlay mode was unaffected. Thanks to @VREmma for the reproducer. diff --git a/frontend/package-lock.json b/frontend/package-lock.json index 49bbe77a9..14389d2d4 100644 --- a/frontend/package-lock.json +++ b/frontend/package-lock.json @@ -22,7 +22,7 @@ "@tiptap/react": "^3.11.1", "@tiptap/starter-kit": "^3.11.1", "@types/three": "^0.181.0", - "dompurify": "^3.3.3", + "dompurify": "^3.4.0", "gcode-preview": "^2.18.0", "i18next": "25.6.3", "i18next-browser-languagedetector": "^8.2.0", @@ -4269,9 +4269,9 @@ "peer": true }, "node_modules/dompurify": { - "version": "3.3.3", - "resolved": "https://registry.npmjs.org/dompurify/-/dompurify-3.3.3.tgz", - "integrity": "sha512-Oj6pzI2+RqBfFG+qOaOLbFXLQ90ARpcGG6UePL82bJLtdsa6CYJD7nmiU8MW9nQNOtCHV3lZ/Bzq1X0QYbBZCA==", + "version": "3.4.0", + "resolved": "https://registry.npmjs.org/dompurify/-/dompurify-3.4.0.tgz", + "integrity": "sha512-nolgK9JcaUXMSmW+j1yaSvaEaoXYHwWyGJlkoCTghc97KgGDDSnpoU/PlEnw63Ah+TGKFOyY+X5LnxaWbCSfXg==", "optionalDependencies": { "@types/trusted-types": "^2.0.7" } diff --git a/frontend/package.json b/frontend/package.json index 431206055..6df7b260b 100644 --- a/frontend/package.json +++ b/frontend/package.json @@ -28,7 +28,7 @@ "@tiptap/react": "^3.11.1", "@tiptap/starter-kit": "^3.11.1", "@types/three": "^0.181.0", - "dompurify": "^3.3.3", + "dompurify": "^3.4.0", "gcode-preview": "^2.18.0", "i18next": "25.6.3", "i18next-browser-languagedetector": "^8.2.0", diff --git a/requirements.txt b/requirements.txt index 91a6d9e3e..eddca9e05 100644 --- a/requirements.txt +++ b/requirements.txt @@ -35,7 +35,7 @@ openpyxl>=3.1.0 pywebpush>=2.0.0 # Utilities -python-multipart>=0.0.6 +python-multipart>=0.0.26 aiofiles>=23.0.0 # QR Code generation diff --git a/static/assets/index-ZvhX-Q31.js b/static/assets/index-CSgLWiF3.js similarity index 93% rename from static/assets/index-ZvhX-Q31.js rename to static/assets/index-CSgLWiF3.js index 9893e4d51..06afbf7d1 100644 --- a/static/assets/index-ZvhX-Q31.js +++ b/static/assets/index-CSgLWiF3.js @@ -1,12 +1,12 @@ -function Dde(t,e){for(var n=0;nr[i]})}}}return Object.freeze(Object.defineProperty(t,Symbol.toStringTag,{value:"Module"}))}(function(){const e=document.createElement("link").relList;if(e&&e.supports&&e.supports("modulepreload"))return;for(const i of document.querySelectorAll('link[rel="modulepreload"]'))r(i);new MutationObserver(i=>{for(const s of i)if(s.type==="childList")for(const o of s.addedNodes)o.tagName==="LINK"&&o.rel==="modulepreload"&&r(o)}).observe(document,{childList:!0,subtree:!0});function n(i){const s={};return i.integrity&&(s.integrity=i.integrity),i.referrerPolicy&&(s.referrerPolicy=i.referrerPolicy),i.crossOrigin==="use-credentials"?s.credentials="include":i.crossOrigin==="anonymous"?s.credentials="omit":s.credentials="same-origin",s}function r(i){if(i.ep)return;i.ep=!0;const s=n(i);fetch(i.href,s)}})();var I_=typeof globalThis<"u"?globalThis:typeof window<"u"?window:typeof global<"u"?global:typeof self<"u"?self:{};function hc(t){return t&&t.__esModule&&Object.prototype.hasOwnProperty.call(t,"default")?t.default:t}var cM={exports:{}},yv={};var N8;function Fde(){if(N8)return yv;N8=1;var t=Symbol.for("react.transitional.element"),e=Symbol.for("react.fragment");function n(r,i,s){var o=null;if(s!==void 0&&(o=""+s),i.key!==void 0&&(o=""+i.key),"key"in i){s={};for(var l in i)l!=="key"&&(s[l]=i[l])}else s=i;return i=s.ref,{$$typeof:t,type:r,key:o,ref:i!==void 0?i:null,props:s}}return yv.Fragment=e,yv.jsx=n,yv.jsxs=n,yv}var C8;function Rde(){return C8||(C8=1,cM.exports=Fde()),cM.exports}var a=Rde(),dM={exports:{}},Wn={};var P8;function Lde(){if(P8)return Wn;P8=1;var t=Symbol.for("react.transitional.element"),e=Symbol.for("react.portal"),n=Symbol.for("react.fragment"),r=Symbol.for("react.strict_mode"),i=Symbol.for("react.profiler"),s=Symbol.for("react.consumer"),o=Symbol.for("react.context"),l=Symbol.for("react.forward_ref"),c=Symbol.for("react.suspense"),d=Symbol.for("react.memo"),u=Symbol.for("react.lazy"),m=Symbol.for("react.activity"),p=Symbol.iterator;function f(W){return W===null||typeof W!="object"?null:(W=p&&W[p]||W["@@iterator"],typeof W=="function"?W:null)}var x={isMounted:function(){return!1},enqueueForceUpdate:function(){},enqueueReplaceState:function(){},enqueueSetState:function(){}},v=Object.assign,g={};function b(W,ne,ce){this.props=W,this.context=ne,this.refs=g,this.updater=ce||x}b.prototype.isReactComponent={},b.prototype.setState=function(W,ne){if(typeof W!="object"&&typeof W!="function"&&W!=null)throw Error("takes an object of state variables to update or a function which returns an object of state variables.");this.updater.enqueueSetState(this,W,ne,"setState")},b.prototype.forceUpdate=function(W){this.updater.enqueueForceUpdate(this,W,"forceUpdate")};function _(){}_.prototype=b.prototype;function C(W,ne,ce){this.props=W,this.context=ne,this.refs=g,this.updater=ce||x}var P=C.prototype=new _;P.constructor=C,v(P,b.prototype),P.isPureReactComponent=!0;var N=Array.isArray;function A(){}var T={H:null,A:null,T:null,S:null},F=Object.prototype.hasOwnProperty;function k(W,ne,ce){var xe=ce.ref;return{$$typeof:t,type:W,key:ne,ref:xe!==void 0?xe:null,props:ce}}function D(W,ne){return k(W.type,ne,W.props)}function H(W){return typeof W=="object"&&W!==null&&W.$$typeof===t}function z(W){var ne={"=":"=0",":":"=2"};return"$"+W.replace(/[=:]/g,function(ce){return ne[ce]})}var X=/\/+/g;function L(W,ne){return typeof W=="object"&&W!==null&&W.key!=null?z(""+W.key):ne.toString(36)}function te(W){switch(W.status){case"fulfilled":return W.value;case"rejected":throw W.reason;default:switch(typeof W.status=="string"?W.then(A,A):(W.status="pending",W.then(function(ne){W.status==="pending"&&(W.status="fulfilled",W.value=ne)},function(ne){W.status==="pending"&&(W.status="rejected",W.reason=ne)})),W.status){case"fulfilled":return W.value;case"rejected":throw W.reason}}throw W}function ie(W,ne,ce,xe,Ce){var $=typeof W;($==="undefined"||$==="boolean")&&(W=null);var Y=!1;if(W===null)Y=!0;else switch($){case"bigint":case"string":case"number":Y=!0;break;case"object":switch(W.$$typeof){case t:case e:Y=!0;break;case u:return Y=W._init,ie(Y(W._payload),ne,ce,xe,Ce)}}if(Y)return Ce=Ce(W),Y=xe===""?"."+L(W,0):xe,N(Ce)?(ce="",Y!=null&&(ce=Y.replace(X,"$&/")+"/"),ie(Ce,ne,ce,"",function(O){return O})):Ce!=null&&(H(Ce)&&(Ce=D(Ce,ce+(Ce.key==null||W&&W.key===Ce.key?"":(""+Ce.key).replace(X,"$&/")+"/")+Y)),ne.push(Ce)),1;Y=0;var E=xe===""?".":xe+":";if(N(W))for(var j=0;j>>1,le=ie[oe];if(0>>1;oei(ce,ue))xei(Ce,ce)?(ie[oe]=Ce,ie[xe]=ue,oe=xe):(ie[oe]=ce,ie[ne]=ue,oe=ne);else if(xei(Ce,ue))ie[oe]=Ce,ie[xe]=ue,oe=xe;else break e}}return J}function i(ie,J){var ue=ie.sortIndex-J.sortIndex;return ue!==0?ue:ie.id-J.id}if(t.unstable_now=void 0,typeof performance=="object"&&typeof performance.now=="function"){var s=performance;t.unstable_now=function(){return s.now()}}else{var o=Date,l=o.now();t.unstable_now=function(){return o.now()-l}}var c=[],d=[],u=1,m=null,p=3,f=!1,x=!1,v=!1,g=!1,b=typeof setTimeout=="function"?setTimeout:null,_=typeof clearTimeout=="function"?clearTimeout:null,C=typeof setImmediate<"u"?setImmediate:null;function P(ie){for(var J=n(d);J!==null;){if(J.callback===null)r(d);else if(J.startTime<=ie)r(d),J.sortIndex=J.expirationTime,e(c,J);else break;J=n(d)}}function N(ie){if(v=!1,P(ie),!x)if(n(c)!==null)x=!0,A||(A=!0,z());else{var J=n(d);J!==null&&te(N,J.startTime-ie)}}var A=!1,T=-1,F=5,k=-1;function D(){return g?!0:!(t.unstable_now()-kie&&D());){var oe=m.callback;if(typeof oe=="function"){m.callback=null,p=m.priorityLevel;var le=oe(m.expirationTime<=ie);if(ie=t.unstable_now(),typeof le=="function"){m.callback=le,P(ie),J=!0;break t}m===n(c)&&r(c),P(ie)}else r(c);m=n(c)}if(m!==null)J=!0;else{var W=n(d);W!==null&&te(N,W.startTime-ie),J=!1}}break e}finally{m=null,p=ue,f=!1}J=void 0}}finally{J?z():A=!1}}}var z;if(typeof C=="function")z=function(){C(H)};else if(typeof MessageChannel<"u"){var X=new MessageChannel,L=X.port2;X.port1.onmessage=H,z=function(){L.postMessage(null)}}else z=function(){b(H,0)};function te(ie,J){T=b(function(){ie(t.unstable_now())},J)}t.unstable_IdlePriority=5,t.unstable_ImmediatePriority=1,t.unstable_LowPriority=4,t.unstable_NormalPriority=3,t.unstable_Profiling=null,t.unstable_UserBlockingPriority=2,t.unstable_cancelCallback=function(ie){ie.callback=null},t.unstable_forceFrameRate=function(ie){0>ie||125oe?(ie.sortIndex=ue,e(d,ie),n(c)===null&&ie===n(d)&&(v?(_(T),T=-1):v=!0,te(N,ue-oe))):(ie.sortIndex=le,e(c,ie),x||f||(x=!0,A||(A=!0,z()))),ie},t.unstable_shouldYield=D,t.unstable_wrapCallback=function(ie){var J=p;return function(){var ue=p;p=J;try{return ie.apply(this,arguments)}finally{p=ue}}}})(hM)),hM}var j8;function zde(){return j8||(j8=1,mM.exports=Ide()),mM.exports}var pM={exports:{}},_s={};var M8;function Ude(){if(M8)return _s;M8=1;var t=_g();function e(c){var d="https://react.dev/errors/"+c;if(1"u"||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!="function"))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(t)}catch(e){console.error(e)}}return t(),pM.exports=Ude(),pM.exports}var D8;function Bde(){if(D8)return vv;D8=1;var t=zde(),e=_g(),n=LY();function r(h){var y="https://react.dev/errors/"+h;if(1le||(h.current=oe[le],oe[le]=null,le--)}function ce(h,y){le++,oe[le]=h.current,h.current=y}var xe=W(null),Ce=W(null),$=W(null),Y=W(null);function E(h,y){switch(ce($,y),ce(Ce,h),ce(xe,null),y.nodeType){case 9:case 11:h=(h=y.documentElement)&&(h=h.namespaceURI)?KB(h):0;break;default:if(h=y.tagName,y=y.namespaceURI)y=KB(y),h=XB(y,h);else switch(h){case"svg":h=1;break;case"math":h=2;break;default:h=0}}ne(xe),ce(xe,h)}function j(){ne(xe),ne(Ce),ne($)}function O(h){h.memoizedState!==null&&ce(Y,h);var y=xe.current,S=XB(y,h.type);y!==S&&(ce(Ce,h),ce(xe,S))}function K(h){Ce.current===h&&(ne(xe),ne(Ce)),Y.current===h&&(ne(Y),fv._currentValue=ue)}var B,pe;function I(h){if(B===void 0)try{throw Error()}catch(S){var y=S.stack.trim().match(/\n( *(at )?)/);B=y&&y[1]||"",pe=-1r[i]})}}}return Object.freeze(Object.defineProperty(t,Symbol.toStringTag,{value:"Module"}))}(function(){const e=document.createElement("link").relList;if(e&&e.supports&&e.supports("modulepreload"))return;for(const i of document.querySelectorAll('link[rel="modulepreload"]'))r(i);new MutationObserver(i=>{for(const s of i)if(s.type==="childList")for(const o of s.addedNodes)o.tagName==="LINK"&&o.rel==="modulepreload"&&r(o)}).observe(document,{childList:!0,subtree:!0});function n(i){const s={};return i.integrity&&(s.integrity=i.integrity),i.referrerPolicy&&(s.referrerPolicy=i.referrerPolicy),i.crossOrigin==="use-credentials"?s.credentials="include":i.crossOrigin==="anonymous"?s.credentials="omit":s.credentials="same-origin",s}function r(i){if(i.ep)return;i.ep=!0;const s=n(i);fetch(i.href,s)}})();var U_=typeof globalThis<"u"?globalThis:typeof window<"u"?window:typeof global<"u"?global:typeof self<"u"?self:{};function mc(t){return t&&t.__esModule&&Object.prototype.hasOwnProperty.call(t,"default")?t.default:t}var cM={exports:{}},vv={};var N8;function Fde(){if(N8)return vv;N8=1;var t=Symbol.for("react.transitional.element"),e=Symbol.for("react.fragment");function n(r,i,s){var o=null;if(s!==void 0&&(o=""+s),i.key!==void 0&&(o=""+i.key),"key"in i){s={};for(var l in i)l!=="key"&&(s[l]=i[l])}else s=i;return i=s.ref,{$$typeof:t,type:r,key:o,ref:i!==void 0?i:null,props:s}}return vv.Fragment=e,vv.jsx=n,vv.jsxs=n,vv}var C8;function Rde(){return C8||(C8=1,cM.exports=Fde()),cM.exports}var a=Rde(),dM={exports:{}},Wn={};var P8;function Lde(){if(P8)return Wn;P8=1;var t=Symbol.for("react.transitional.element"),e=Symbol.for("react.portal"),n=Symbol.for("react.fragment"),r=Symbol.for("react.strict_mode"),i=Symbol.for("react.profiler"),s=Symbol.for("react.consumer"),o=Symbol.for("react.context"),l=Symbol.for("react.forward_ref"),c=Symbol.for("react.suspense"),d=Symbol.for("react.memo"),u=Symbol.for("react.lazy"),m=Symbol.for("react.activity"),p=Symbol.iterator;function f(W){return W===null||typeof W!="object"?null:(W=p&&W[p]||W["@@iterator"],typeof W=="function"?W:null)}var x={isMounted:function(){return!1},enqueueForceUpdate:function(){},enqueueReplaceState:function(){},enqueueSetState:function(){}},v=Object.assign,g={};function b(W,ne,ce){this.props=W,this.context=ne,this.refs=g,this.updater=ce||x}b.prototype.isReactComponent={},b.prototype.setState=function(W,ne){if(typeof W!="object"&&typeof W!="function"&&W!=null)throw Error("takes an object of state variables to update or a function which returns an object of state variables.");this.updater.enqueueSetState(this,W,ne,"setState")},b.prototype.forceUpdate=function(W){this.updater.enqueueForceUpdate(this,W,"forceUpdate")};function _(){}_.prototype=b.prototype;function C(W,ne,ce){this.props=W,this.context=ne,this.refs=g,this.updater=ce||x}var P=C.prototype=new _;P.constructor=C,v(P,b.prototype),P.isPureReactComponent=!0;var N=Array.isArray;function A(){}var T={H:null,A:null,T:null,S:null},F=Object.prototype.hasOwnProperty;function k(W,ne,ce){var xe=ce.ref;return{$$typeof:t,type:W,key:ne,ref:xe!==void 0?xe:null,props:ce}}function D(W,ne){return k(W.type,ne,W.props)}function H(W){return typeof W=="object"&&W!==null&&W.$$typeof===t}function z(W){var ne={"=":"=0",":":"=2"};return"$"+W.replace(/[=:]/g,function(ce){return ne[ce]})}var X=/\/+/g;function L(W,ne){return typeof W=="object"&&W!==null&&W.key!=null?z(""+W.key):ne.toString(36)}function te(W){switch(W.status){case"fulfilled":return W.value;case"rejected":throw W.reason;default:switch(typeof W.status=="string"?W.then(A,A):(W.status="pending",W.then(function(ne){W.status==="pending"&&(W.status="fulfilled",W.value=ne)},function(ne){W.status==="pending"&&(W.status="rejected",W.reason=ne)})),W.status){case"fulfilled":return W.value;case"rejected":throw W.reason}}throw W}function ie(W,ne,ce,xe,Ce){var $=typeof W;($==="undefined"||$==="boolean")&&(W=null);var Y=!1;if(W===null)Y=!0;else switch($){case"bigint":case"string":case"number":Y=!0;break;case"object":switch(W.$$typeof){case t:case e:Y=!0;break;case u:return Y=W._init,ie(Y(W._payload),ne,ce,xe,Ce)}}if(Y)return Ce=Ce(W),Y=xe===""?"."+L(W,0):xe,N(Ce)?(ce="",Y!=null&&(ce=Y.replace(X,"$&/")+"/"),ie(Ce,ne,ce,"",function(O){return O})):Ce!=null&&(H(Ce)&&(Ce=D(Ce,ce+(Ce.key==null||W&&W.key===Ce.key?"":(""+Ce.key).replace(X,"$&/")+"/")+Y)),ne.push(Ce)),1;Y=0;var E=xe===""?".":xe+":";if(N(W))for(var j=0;j>>1,le=ie[oe];if(0>>1;oei(ce,ue))xei(Ce,ce)?(ie[oe]=Ce,ie[xe]=ue,oe=xe):(ie[oe]=ce,ie[ne]=ue,oe=ne);else if(xei(Ce,ue))ie[oe]=Ce,ie[xe]=ue,oe=xe;else break e}}return J}function i(ie,J){var ue=ie.sortIndex-J.sortIndex;return ue!==0?ue:ie.id-J.id}if(t.unstable_now=void 0,typeof performance=="object"&&typeof performance.now=="function"){var s=performance;t.unstable_now=function(){return s.now()}}else{var o=Date,l=o.now();t.unstable_now=function(){return o.now()-l}}var c=[],d=[],u=1,m=null,p=3,f=!1,x=!1,v=!1,g=!1,b=typeof setTimeout=="function"?setTimeout:null,_=typeof clearTimeout=="function"?clearTimeout:null,C=typeof setImmediate<"u"?setImmediate:null;function P(ie){for(var J=n(d);J!==null;){if(J.callback===null)r(d);else if(J.startTime<=ie)r(d),J.sortIndex=J.expirationTime,e(c,J);else break;J=n(d)}}function N(ie){if(v=!1,P(ie),!x)if(n(c)!==null)x=!0,A||(A=!0,z());else{var J=n(d);J!==null&&te(N,J.startTime-ie)}}var A=!1,T=-1,F=5,k=-1;function D(){return g?!0:!(t.unstable_now()-kie&&D());){var oe=m.callback;if(typeof oe=="function"){m.callback=null,p=m.priorityLevel;var le=oe(m.expirationTime<=ie);if(ie=t.unstable_now(),typeof le=="function"){m.callback=le,P(ie),J=!0;break t}m===n(c)&&r(c),P(ie)}else r(c);m=n(c)}if(m!==null)J=!0;else{var W=n(d);W!==null&&te(N,W.startTime-ie),J=!1}}break e}finally{m=null,p=ue,f=!1}J=void 0}}finally{J?z():A=!1}}}var z;if(typeof C=="function")z=function(){C(H)};else if(typeof MessageChannel<"u"){var X=new MessageChannel,L=X.port2;X.port1.onmessage=H,z=function(){L.postMessage(null)}}else z=function(){b(H,0)};function te(ie,J){T=b(function(){ie(t.unstable_now())},J)}t.unstable_IdlePriority=5,t.unstable_ImmediatePriority=1,t.unstable_LowPriority=4,t.unstable_NormalPriority=3,t.unstable_Profiling=null,t.unstable_UserBlockingPriority=2,t.unstable_cancelCallback=function(ie){ie.callback=null},t.unstable_forceFrameRate=function(ie){0>ie||125oe?(ie.sortIndex=ue,e(d,ie),n(c)===null&&ie===n(d)&&(v?(_(T),T=-1):v=!0,te(N,ue-oe))):(ie.sortIndex=le,e(c,ie),x||f||(x=!0,A||(A=!0,z()))),ie},t.unstable_shouldYield=D,t.unstable_wrapCallback=function(ie){var J=p;return function(){var ue=p;p=J;try{return ie.apply(this,arguments)}finally{p=ue}}}})(hM)),hM}var j8;function zde(){return j8||(j8=1,mM.exports=Ide()),mM.exports}var pM={exports:{}},_s={};var M8;function Ude(){if(M8)return _s;M8=1;var t=_g();function e(c){var d="https://react.dev/errors/"+c;if(1"u"||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!="function"))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(t)}catch(e){console.error(e)}}return t(),pM.exports=Ude(),pM.exports}var D8;function Bde(){if(D8)return wv;D8=1;var t=zde(),e=_g(),n=LY();function r(h){var y="https://react.dev/errors/"+h;if(1le||(h.current=oe[le],oe[le]=null,le--)}function ce(h,y){le++,oe[le]=h.current,h.current=y}var xe=W(null),Ce=W(null),$=W(null),Y=W(null);function E(h,y){switch(ce($,y),ce(Ce,h),ce(xe,null),y.nodeType){case 9:case 11:h=(h=y.documentElement)&&(h=h.namespaceURI)?KB(h):0;break;default:if(h=y.tagName,y=y.namespaceURI)y=KB(y),h=XB(y,h);else switch(h){case"svg":h=1;break;case"math":h=2;break;default:h=0}}ne(xe),ce(xe,h)}function j(){ne(xe),ne(Ce),ne($)}function O(h){h.memoizedState!==null&&ce(Y,h);var y=xe.current,S=XB(y,h.type);y!==S&&(ce(Ce,h),ce(xe,S))}function K(h){Ce.current===h&&(ne(xe),ne(Ce)),Y.current===h&&(ne(Y),gv._currentValue=ue)}var B,he;function I(h){if(B===void 0)try{throw Error()}catch(S){var y=S.stack.trim().match(/\n( *(at )?)/);B=y&&y[1]||"",he=-1)":-1q||at[M]!==kt[q]){var Ot=` -`+at[M].replace(" at new "," at ");return h.displayName&&Ot.includes("")&&(Ot=Ot.replace("",h.displayName)),Ot}while(1<=M&&0<=q);break}}}finally{V=!1,Error.prepareStackTrace=S}return(S=h?h.displayName||h.name:"")?I(S):""}function G(h,y){switch(h.tag){case 26:case 27:case 5:return I(h.type);case 16:return I("Lazy");case 13:return h.child!==y&&y!==null?I("Suspense Fallback"):I("Suspense");case 19:return I("SuspenseList");case 0:case 15:return Q(h.type,!1);case 11:return Q(h.type.render,!1);case 1:return Q(h.type,!0);case 31:return I("Activity");default:return""}}function ee(h){try{var y="",S=null;do y+=G(h,S),S=h,h=h.return;while(h);return y}catch(M){return` +`+B+h+he}var V=!1;function Q(h,y){if(!h||V)return"";V=!0;var S=Error.prepareStackTrace;Error.prepareStackTrace=void 0;try{var M={DetermineComponentFrameRoot:function(){try{if(y){var Ut=function(){throw Error()};if(Object.defineProperty(Ut.prototype,"props",{set:function(){throw Error()}}),typeof Reflect=="object"&&Reflect.construct){try{Reflect.construct(Ut,[])}catch(Dt){var Ct=Dt}Reflect.construct(h,[],Ut)}else{try{Ut.call()}catch(Dt){Ct=Dt}h.call(Ut.prototype)}}else{try{throw Error()}catch(Dt){Ct=Dt}(Ut=h())&&typeof Ut.catch=="function"&&Ut.catch(function(){})}}catch(Dt){if(Dt&&Ct&&typeof Dt.stack=="string")return[Dt.stack,Ct.stack]}return[null,null]}};M.DetermineComponentFrameRoot.displayName="DetermineComponentFrameRoot";var q=Object.getOwnPropertyDescriptor(M.DetermineComponentFrameRoot,"name");q&&q.configurable&&Object.defineProperty(M.DetermineComponentFrameRoot,"name",{value:"DetermineComponentFrameRoot"});var Z=M.DetermineComponentFrameRoot(),Ne=Z[0],He=Z[1];if(Ne&&He){var rt=Ne.split(` +`),kt=He.split(` +`);for(q=M=0;Mq||rt[M]!==kt[q]){var Ot=` +`+rt[M].replace(" at new "," at ");return h.displayName&&Ot.includes("")&&(Ot=Ot.replace("",h.displayName)),Ot}while(1<=M&&0<=q);break}}}finally{V=!1,Error.prepareStackTrace=S}return(S=h?h.displayName||h.name:"")?I(S):""}function G(h,y){switch(h.tag){case 26:case 27:case 5:return I(h.type);case 16:return I("Lazy");case 13:return h.child!==y&&y!==null?I("Suspense Fallback"):I("Suspense");case 19:return I("SuspenseList");case 0:case 15:return Q(h.type,!1);case 11:return Q(h.type.render,!1);case 1:return Q(h.type,!0);case 31:return I("Activity");default:return""}}function ee(h){try{var y="",S=null;do y+=G(h,S),S=h,h=h.return;while(h);return y}catch(M){return` Error generating stack: `+M.message+` -`+M.stack}}var se=Object.prototype.hasOwnProperty,ge=t.unstable_scheduleCallback,fe=t.unstable_cancelCallback,de=t.unstable_shouldYield,U=t.unstable_requestPaint,R=t.unstable_now,re=t.unstable_getCurrentPriorityLevel,_e=t.unstable_ImmediatePriority,Se=t.unstable_UserBlockingPriority,ye=t.unstable_NormalPriority,Te=t.unstable_LowPriority,be=t.unstable_IdlePriority,Ae=t.log,Re=t.unstable_setDisableYieldValue,Me=null,Fe=null;function Le(h){if(typeof Ae=="function"&&Re(h),Fe&&typeof Fe.setStrictMode=="function")try{Fe.setStrictMode(Me,h)}catch{}}var qe=Math.clz32?Math.clz32:ae,Ye=Math.log,nt=Math.LN2;function ae(h){return h>>>=0,h===0?32:31-(Ye(h)/nt|0)|0}var ze=256,we=262144,Ve=4194304;function je(h){var y=h&42;if(y!==0)return y;switch(h&-h){case 1:return 1;case 2:return 2;case 4:return 4;case 8:return 8;case 16:return 16;case 32:return 32;case 64:return 64;case 128:return 128;case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:return h&261888;case 262144:case 524288:case 1048576:case 2097152:return h&3932160;case 4194304:case 8388608:case 16777216:case 33554432:return h&62914560;case 67108864:return 67108864;case 134217728:return 134217728;case 268435456:return 268435456;case 536870912:return 536870912;case 1073741824:return 0;default:return h}}function me(h,y,S){var M=h.pendingLanes;if(M===0)return 0;var q=0,Z=h.suspendedLanes,Ne=h.pingedLanes;h=h.warmLanes;var Be=M&134217727;return Be!==0?(M=Be&~Z,M!==0?q=je(M):(Ne&=Be,Ne!==0?q=je(Ne):S||(S=Be&~h,S!==0&&(q=je(S))))):(Be=M&~Z,Be!==0?q=je(Be):Ne!==0?q=je(Ne):S||(S=M&~h,S!==0&&(q=je(S)))),q===0?0:y!==0&&y!==q&&(y&Z)===0&&(Z=q&-q,S=y&-y,Z>=S||Z===32&&(S&4194048)!==0)?y:q}function ve(h,y){return(h.pendingLanes&~(h.suspendedLanes&~h.pingedLanes)&y)===0}function Ue(h,y){switch(h){case 1:case 2:case 4:case 8:case 64:return y+250;case 16:case 32:case 128:case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:case 262144:case 524288:case 1048576:case 2097152:return y+5e3;case 4194304:case 8388608:case 16777216:case 33554432:return-1;case 67108864:case 134217728:case 268435456:case 536870912:case 1073741824:return-1;default:return-1}}function Ze(){var h=Ve;return Ve<<=1,(Ve&62914560)===0&&(Ve=4194304),h}function mt(h){for(var y=[],S=0;31>S;S++)y.push(h);return y}function gt(h,y){h.pendingLanes|=y,y!==268435456&&(h.suspendedLanes=0,h.pingedLanes=0,h.warmLanes=0)}function xt(h,y,S,M,q,Z){var Ne=h.pendingLanes;h.pendingLanes=S,h.suspendedLanes=0,h.pingedLanes=0,h.warmLanes=0,h.expiredLanes&=S,h.entangledLanes&=S,h.errorRecoveryDisabledLanes&=S,h.shellSuspendCounter=0;var Be=h.entanglements,at=h.expirationTimes,kt=h.hiddenUpdates;for(S=Ne&~S;0"u")return null;try{return h.activeElement||h.body}catch{return h.body}}var Mr=/[\n"\\]/g;function En(h){return h.replace(Mr,function(y){return"\\"+y.charCodeAt(0).toString(16)+" "})}function ja(h,y,S,M,q,Z,Ne,Be){h.name="",Ne!=null&&typeof Ne!="function"&&typeof Ne!="symbol"&&typeof Ne!="boolean"?h.type=Ne:h.removeAttribute("type"),y!=null?Ne==="number"?(y===0&&h.value===""||h.value!=y)&&(h.value=""+zn(y)):h.value!==""+zn(y)&&(h.value=""+zn(y)):Ne!=="submit"&&Ne!=="reset"||h.removeAttribute("value"),y!=null?na(h,Ne,zn(y)):S!=null?na(h,Ne,zn(S)):M!=null&&h.removeAttribute("value"),q==null&&Z!=null&&(h.defaultChecked=!!Z),q!=null&&(h.checked=q&&typeof q!="function"&&typeof q!="symbol"),Be!=null&&typeof Be!="function"&&typeof Be!="symbol"&&typeof Be!="boolean"?h.name=""+zn(Be):h.removeAttribute("name")}function Pn(h,y,S,M,q,Z,Ne,Be){if(Z!=null&&typeof Z!="function"&&typeof Z!="symbol"&&typeof Z!="boolean"&&(h.type=Z),y!=null||S!=null){if(!(Z!=="submit"&&Z!=="reset"||y!=null)){bn(h);return}S=S!=null?""+zn(S):"",y=y!=null?""+zn(y):S,Be||y===h.value||(h.value=y),h.defaultValue=y}M=M??q,M=typeof M!="function"&&typeof M!="symbol"&&!!M,h.checked=Be?h.checked:!!M,h.defaultChecked=!!M,Ne!=null&&typeof Ne!="function"&&typeof Ne!="symbol"&&typeof Ne!="boolean"&&(h.name=Ne),bn(h)}function na(h,y,S){y==="number"&&hr(h.ownerDocument)===h||h.defaultValue===""+S||(h.defaultValue=""+S)}function Bn(h,y,S,M){if(h=h.options,y){y={};for(var q=0;q"u"||typeof window.document>"u"||typeof window.document.createElement>"u"),Em=!1;if(Bs)try{var Hs={};Object.defineProperty(Hs,"passive",{get:function(){Em=!0}}),window.addEventListener("test",Hs,Hs),window.removeEventListener("test",Hs,Hs)}catch{Em=!1}var Bo=null,gc=null,ed=null;function mo(){if(ed)return ed;var h,y=gc,S=y.length,M,q="value"in Bo?Bo.value:Bo.textContent,Z=q.length;for(h=0;h=en),Ja=" ",Yi=!1;function _l(h,y){switch(h){case"keyup":return ua.indexOf(y.keyCode)!==-1;case"keydown":return y.keyCode!==229;case"keypress":case"mousedown":case"focusout":return!0;default:return!1}}function Ho(h){return h=h.detail,typeof h=="object"&&"data"in h?h.data:null}var qr=!1;function Qi(h,y){switch(h){case"compositionend":return Ho(y);case"keypress":return y.which!==32?null:(Yi=!0,Ja);case"textInput":return h=y.data,h===Ja&&Yi?null:h;default:return null}}function wc(h,y){if(qr)return h==="compositionend"||!ga&&_l(h,y)?(h=mo(),ed=gc=Bo=null,qr=!1,h):null;switch(h){case"paste":return null;case"keypress":if(!(y.ctrlKey||y.altKey||y.metaKey)||y.ctrlKey&&y.altKey){if(y.char&&1=y)return{node:S,offset:y-h};h=M}e:{for(;S;){if(S.nextSibling){S=S.nextSibling;break e}S=S.parentNode}S=void 0}S=m5(S)}}function p5(h,y){return h&&y?h===y?!0:h&&h.nodeType===3?!1:y&&y.nodeType===3?p5(h,y.parentNode):"contains"in h?h.contains(y):h.compareDocumentPosition?!!(h.compareDocumentPosition(y)&16):!1:!1}function f5(h){h=h!=null&&h.ownerDocument!=null&&h.ownerDocument.defaultView!=null?h.ownerDocument.defaultView:window;for(var y=hr(h.document);y instanceof h.HTMLIFrameElement;){try{var S=typeof y.contentWindow.location.href=="string"}catch{S=!1}if(S)h=y.contentWindow;else break;y=hr(h.document)}return y}function xA(h){var y=h&&h.nodeName&&h.nodeName.toLowerCase();return y&&(y==="input"&&(h.type==="text"||h.type==="search"||h.type==="tel"||h.type==="url"||h.type==="password")||y==="textarea"||h.contentEditable==="true")}var mce=Bs&&"documentMode"in document&&11>=document.documentMode,Og=null,yA=null,Uy=null,vA=!1;function g5(h,y,S){var M=S.window===S?S.document:S.nodeType===9?S:S.ownerDocument;vA||Og==null||Og!==hr(M)||(M=Og,"selectionStart"in M&&xA(M)?M={start:M.selectionStart,end:M.selectionEnd}:(M=(M.ownerDocument&&M.ownerDocument.defaultView||window).getSelection(),M={anchorNode:M.anchorNode,anchorOffset:M.anchorOffset,focusNode:M.focusNode,focusOffset:M.focusOffset}),Uy&&zy(Uy,M)||(Uy=M,M=__(yA,"onSelect"),0>=Ne,q-=Ne,sd=1<<32-qe(y)+q|S<Qn?(xr=xn,xn=null):xr=xn.sibling;var Pr=Ct(ft,xn,_t[Qn],zt);if(Pr===null){xn===null&&(xn=xr);break}h&&xn&&Pr.alternate===null&&y(ft,xn),dt=Z(Pr,dt,Qn),Cr===null?Cn=Pr:Cr.sibling=Pr,Cr=Pr,xn=xr}if(Qn===_t.length)return S(ft,xn),vr&&ru(ft,Qn),Cn;if(xn===null){for(;Qn<_t.length;Qn++)xn=Ut(ft,_t[Qn],zt),xn!==null&&(dt=Z(xn,dt,Qn),Cr===null?Cn=xn:Cr.sibling=xn,Cr=xn);return vr&&ru(ft,Qn),Cn}for(xn=M(xn);Qn<_t.length;Qn++)xr=Dt(xn,ft,Qn,_t[Qn],zt),xr!==null&&(h&&xr.alternate!==null&&xn.delete(xr.key===null?Qn:xr.key),dt=Z(xr,dt,Qn),Cr===null?Cn=xr:Cr.sibling=xr,Cr=xr);return h&&xn.forEach(function(th){return y(ft,th)}),vr&&ru(ft,Qn),Cn}function Rn(ft,dt,_t,zt){if(_t==null)throw Error(r(151));for(var Cn=null,Cr=null,xn=dt,Qn=dt=0,xr=null,Pr=_t.next();xn!==null&&!Pr.done;Qn++,Pr=_t.next()){xn.index>Qn?(xr=xn,xn=null):xr=xn.sibling;var th=Ct(ft,xn,Pr.value,zt);if(th===null){xn===null&&(xn=xr);break}h&&xn&&th.alternate===null&&y(ft,xn),dt=Z(th,dt,Qn),Cr===null?Cn=th:Cr.sibling=th,Cr=th,xn=xr}if(Pr.done)return S(ft,xn),vr&&ru(ft,Qn),Cn;if(xn===null){for(;!Pr.done;Qn++,Pr=_t.next())Pr=Ut(ft,Pr.value,zt),Pr!==null&&(dt=Z(Pr,dt,Qn),Cr===null?Cn=Pr:Cr.sibling=Pr,Cr=Pr);return vr&&ru(ft,Qn),Cn}for(xn=M(xn);!Pr.done;Qn++,Pr=_t.next())Pr=Dt(xn,ft,Qn,Pr.value,zt),Pr!==null&&(h&&Pr.alternate!==null&&xn.delete(Pr.key===null?Qn:Pr.key),dt=Z(Pr,dt,Qn),Cr===null?Cn=Pr:Cr.sibling=Pr,Cr=Pr);return h&&xn.forEach(function(Ede){return y(ft,Ede)}),vr&&ru(ft,Qn),Cn}function Wr(ft,dt,_t,zt){if(typeof _t=="object"&&_t!==null&&_t.type===v&&_t.key===null&&(_t=_t.props.children),typeof _t=="object"&&_t!==null){switch(_t.$$typeof){case f:e:{for(var Cn=_t.key;dt!==null;){if(dt.key===Cn){if(Cn=_t.type,Cn===v){if(dt.tag===7){S(ft,dt.sibling),zt=q(dt,_t.props.children),zt.return=ft,ft=zt;break e}}else if(dt.elementType===Cn||typeof Cn=="object"&&Cn!==null&&Cn.$$typeof===F&&qp(Cn)===dt.type){S(ft,dt.sibling),zt=q(dt,_t.props),Gy(zt,_t),zt.return=ft,ft=zt;break e}S(ft,dt);break}else y(ft,dt);dt=dt.sibling}_t.type===v?(zt=Ip(_t.props.children,ft.mode,zt,_t.key),zt.return=ft,ft=zt):(zt=US(_t.type,_t.key,_t.props,null,ft.mode,zt),Gy(zt,_t),zt.return=ft,ft=zt)}return Ne(ft);case x:e:{for(Cn=_t.key;dt!==null;){if(dt.key===Cn)if(dt.tag===4&&dt.stateNode.containerInfo===_t.containerInfo&&dt.stateNode.implementation===_t.implementation){S(ft,dt.sibling),zt=q(dt,_t.children||[]),zt.return=ft,ft=zt;break e}else{S(ft,dt);break}else y(ft,dt);dt=dt.sibling}zt=PA(_t,ft.mode,zt),zt.return=ft,ft=zt}return Ne(ft);case F:return _t=qp(_t),Wr(ft,dt,_t,zt)}if(te(_t))return pn(ft,dt,_t,zt);if(z(_t)){if(Cn=z(_t),typeof Cn!="function")throw Error(r(150));return _t=Cn.call(_t),Rn(ft,dt,_t,zt)}if(typeof _t.then=="function")return Wr(ft,dt,WS(_t),zt);if(_t.$$typeof===C)return Wr(ft,dt,qS(ft,_t),zt);KS(ft,_t)}return typeof _t=="string"&&_t!==""||typeof _t=="number"||typeof _t=="bigint"?(_t=""+_t,dt!==null&&dt.tag===6?(S(ft,dt.sibling),zt=q(dt,_t),zt.return=ft,ft=zt):(S(ft,dt),zt=CA(_t,ft.mode,zt),zt.return=ft,ft=zt),Ne(ft)):S(ft,dt)}return function(ft,dt,_t,zt){try{Vy=0;var Cn=Wr(ft,dt,_t,zt);return Kg=null,Cn}catch(xn){if(xn===Wg||xn===VS)throw xn;var Cr=$o(29,xn,null,ft.mode);return Cr.lanes=zt,Cr.return=ft,Cr}}}var Vp=z5(!0),U5=z5(!1),Im=!1;function zA(h){h.updateQueue={baseState:h.memoizedState,firstBaseUpdate:null,lastBaseUpdate:null,shared:{pending:null,lanes:0,hiddenCallbacks:null},callbacks:null}}function UA(h,y){h=h.updateQueue,y.updateQueue===h&&(y.updateQueue={baseState:h.baseState,firstBaseUpdate:h.firstBaseUpdate,lastBaseUpdate:h.lastBaseUpdate,shared:h.shared,callbacks:null})}function zm(h){return{lane:h,tag:0,payload:null,callback:null,next:null}}function Um(h,y,S){var M=h.updateQueue;if(M===null)return null;if(M=M.shared,(Er&2)!==0){var q=M.pending;return q===null?y.next=y:(y.next=q.next,q.next=y),M.pending=y,y=zS(h),_5(h,null,S),y}return IS(h,M,y,S),zS(h)}function Wy(h,y,S){if(y=y.updateQueue,y!==null&&(y=y.shared,(S&4194048)!==0)){var M=y.lanes;M&=h.pendingLanes,S|=M,y.lanes=S,Yt(h,S)}}function BA(h,y){var S=h.updateQueue,M=h.alternate;if(M!==null&&(M=M.updateQueue,S===M)){var q=null,Z=null;if(S=S.firstBaseUpdate,S!==null){do{var Ne={lane:S.lane,tag:S.tag,payload:S.payload,callback:null,next:null};Z===null?q=Z=Ne:Z=Z.next=Ne,S=S.next}while(S!==null);Z===null?q=Z=y:Z=Z.next=y}else q=Z=y;S={baseState:M.baseState,firstBaseUpdate:q,lastBaseUpdate:Z,shared:M.shared,callbacks:M.callbacks},h.updateQueue=S;return}h=S.lastBaseUpdate,h===null?S.firstBaseUpdate=y:h.next=y,S.lastBaseUpdate=y}var HA=!1;function Ky(){if(HA){var h=Gg;if(h!==null)throw h}}function Xy(h,y,S,M){HA=!1;var q=h.updateQueue;Im=!1;var Z=q.firstBaseUpdate,Ne=q.lastBaseUpdate,Be=q.shared.pending;if(Be!==null){q.shared.pending=null;var at=Be,kt=at.next;at.next=null,Ne===null?Z=kt:Ne.next=kt,Ne=at;var Ot=h.alternate;Ot!==null&&(Ot=Ot.updateQueue,Be=Ot.lastBaseUpdate,Be!==Ne&&(Be===null?Ot.firstBaseUpdate=kt:Be.next=kt,Ot.lastBaseUpdate=at))}if(Z!==null){var Ut=q.baseState;Ne=0,Ot=kt=at=null,Be=Z;do{var Ct=Be.lane&-536870913,Dt=Ct!==Be.lane;if(Dt?(br&Ct)===Ct:(M&Ct)===Ct){Ct!==0&&Ct===Vg&&(HA=!0),Ot!==null&&(Ot=Ot.next={lane:0,tag:Be.tag,payload:Be.payload,callback:null,next:null});e:{var pn=h,Rn=Be;Ct=y;var Wr=S;switch(Rn.tag){case 1:if(pn=Rn.payload,typeof pn=="function"){Ut=pn.call(Wr,Ut,Ct);break e}Ut=pn;break e;case 3:pn.flags=pn.flags&-65537|128;case 0:if(pn=Rn.payload,Ct=typeof pn=="function"?pn.call(Wr,Ut,Ct):pn,Ct==null)break e;Ut=m({},Ut,Ct);break e;case 2:Im=!0}}Ct=Be.callback,Ct!==null&&(h.flags|=64,Dt&&(h.flags|=8192),Dt=q.callbacks,Dt===null?q.callbacks=[Ct]:Dt.push(Ct))}else Dt={lane:Ct,tag:Be.tag,payload:Be.payload,callback:Be.callback,next:null},Ot===null?(kt=Ot=Dt,at=Ut):Ot=Ot.next=Dt,Ne|=Ct;if(Be=Be.next,Be===null){if(Be=q.shared.pending,Be===null)break;Dt=Be,Be=Dt.next,Dt.next=null,q.lastBaseUpdate=Dt,q.shared.pending=null}}while(!0);Ot===null&&(at=Ut),q.baseState=at,q.firstBaseUpdate=kt,q.lastBaseUpdate=Ot,Z===null&&(q.shared.lanes=0),Vm|=Ne,h.lanes=Ne,h.memoizedState=Ut}}function B5(h,y){if(typeof h!="function")throw Error(r(191,h));h.call(y)}function H5(h,y){var S=h.callbacks;if(S!==null)for(h.callbacks=null,h=0;hZ?Z:8;var Ne=ie.T,Be={};ie.T=Be,oj(h,!1,y,S);try{var at=q(),kt=ie.S;if(kt!==null&&kt(Be,at),at!==null&&typeof at=="object"&&typeof at.then=="function"){var Ot=wce(at,M);Zy(h,y,Ot,Xo(h))}else Zy(h,y,M,Xo(h))}catch(Ut){Zy(h,y,{then:function(){},status:"rejected",reason:Ut},Xo())}finally{J.p=Z,Ne!==null&&Be.types!==null&&(Ne.types=Be.types),ie.T=Ne}}function Pce(){}function ij(h,y,S,M){if(h.tag!==5)throw Error(r(476));var q=vU(h).queue;yU(h,q,y,ue,S===null?Pce:function(){return wU(h),S(M)})}function vU(h){var y=h.memoizedState;if(y!==null)return y;y={memoizedState:ue,baseState:ue,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:ou,lastRenderedState:ue},next:null};var S={};return y.next={memoizedState:S,baseState:S,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:ou,lastRenderedState:S},next:null},h.memoizedState=y,h=h.alternate,h!==null&&(h.memoizedState=y),y}function wU(h){var y=vU(h);y.next===null&&(y=h.alternate.memoizedState),Zy(h,y.next.queue,{},Xo())}function sj(){return es(fv)}function SU(){return ti().memoizedState}function _U(){return ti().memoizedState}function Tce(h){for(var y=h.return;y!==null;){switch(y.tag){case 24:case 3:var S=Xo();h=zm(S);var M=Um(y,h,S);M!==null&&(So(M,y,S),Wy(M,y,S)),y={cache:RA()},h.payload=y;return}y=y.return}}function Ace(h,y,S){var M=Xo();S={lane:M,revertLane:0,gesture:null,action:S,hasEagerState:!1,eagerState:null,next:null},a_(h)?NU(y,S):(S=kA(h,y,S,M),S!==null&&(So(S,h,M),CU(S,y,M)))}function kU(h,y,S){var M=Xo();Zy(h,y,S,M)}function Zy(h,y,S,M){var q={lane:M,revertLane:0,gesture:null,action:S,hasEagerState:!1,eagerState:null,next:null};if(a_(h))NU(y,q);else{var Z=h.alternate;if(h.lanes===0&&(Z===null||Z.lanes===0)&&(Z=y.lastRenderedReducer,Z!==null))try{var Ne=y.lastRenderedState,Be=Z(Ne,S);if(q.hasEagerState=!0,q.eagerState=Be,qo(Be,Ne))return IS(h,y,q,0),aa===null&&OS(),!1}catch{}if(S=kA(h,y,q,M),S!==null)return So(S,h,M),CU(S,y,M),!0}return!1}function oj(h,y,S,M){if(M={lane:2,revertLane:zj(),gesture:null,action:M,hasEagerState:!1,eagerState:null,next:null},a_(h)){if(y)throw Error(r(479))}else y=kA(h,S,M,2),y!==null&&So(y,h,2)}function a_(h){var y=h.alternate;return h===Xn||y!==null&&y===Xn}function NU(h,y){Yg=QS=!0;var S=h.pending;S===null?y.next=y:(y.next=S.next,S.next=y),h.pending=y}function CU(h,y,S){if((S&4194048)!==0){var M=y.lanes;M&=h.pendingLanes,S|=M,y.lanes=S,Yt(h,S)}}var Jy={readContext:es,use:e_,useCallback:Ia,useContext:Ia,useEffect:Ia,useImperativeHandle:Ia,useLayoutEffect:Ia,useInsertionEffect:Ia,useMemo:Ia,useReducer:Ia,useRef:Ia,useState:Ia,useDebugValue:Ia,useDeferredValue:Ia,useTransition:Ia,useSyncExternalStore:Ia,useId:Ia,useHostTransitionStatus:Ia,useFormState:Ia,useActionState:Ia,useOptimistic:Ia,useMemoCache:Ia,useCacheRefresh:Ia};Jy.useEffectEvent=Ia;var PU={readContext:es,use:e_,useCallback:function(h,y){return $s().memoizedState=[h,y===void 0?null:y],h},useContext:es,useEffect:dU,useImperativeHandle:function(h,y,S){S=S!=null?S.concat([h]):null,n_(4194308,4,pU.bind(null,y,h),S)},useLayoutEffect:function(h,y){return n_(4194308,4,h,y)},useInsertionEffect:function(h,y){n_(4,2,h,y)},useMemo:function(h,y){var S=$s();y=y===void 0?null:y;var M=h();if(Gp){Le(!0);try{h()}finally{Le(!1)}}return S.memoizedState=[M,y],M},useReducer:function(h,y,S){var M=$s();if(S!==void 0){var q=S(y);if(Gp){Le(!0);try{S(y)}finally{Le(!1)}}}else q=y;return M.memoizedState=M.baseState=q,h={pending:null,lanes:0,dispatch:null,lastRenderedReducer:h,lastRenderedState:q},M.queue=h,h=h.dispatch=Ace.bind(null,Xn,h),[M.memoizedState,h]},useRef:function(h){var y=$s();return h={current:h},y.memoizedState=h},useState:function(h){h=ej(h);var y=h.queue,S=kU.bind(null,Xn,y);return y.dispatch=S,[h.memoizedState,S]},useDebugValue:rj,useDeferredValue:function(h,y){var S=$s();return aj(S,h,y)},useTransition:function(){var h=ej(!1);return h=yU.bind(null,Xn,h.queue,!0,!1),$s().memoizedState=h,[!1,h]},useSyncExternalStore:function(h,y,S){var M=Xn,q=$s();if(vr){if(S===void 0)throw Error(r(407));S=S()}else{if(S=y(),aa===null)throw Error(r(349));(br&127)!==0||K5(M,y,S)}q.memoizedState=S;var Z={value:S,getSnapshot:y};return q.queue=Z,dU(Y5.bind(null,M,Z,h),[h]),M.flags|=2048,Zg(9,{destroy:void 0},X5.bind(null,M,Z,S,y),null),S},useId:function(){var h=$s(),y=aa.identifierPrefix;if(vr){var S=od,M=sd;S=(M&~(1<<32-qe(M)-1)).toString(32)+S,y="_"+y+"R_"+S,S=ZS++,0<\/script>",Z=Z.removeChild(Z.firstChild);break;case"select":Z=typeof M.is=="string"?Ne.createElement("select",{is:M.is}):Ne.createElement("select"),M.multiple?Z.multiple=!0:M.size&&(Z.size=M.size);break;default:Z=typeof M.is=="string"?Ne.createElement(q,{is:M.is}):Ne.createElement(q)}}Z[Nt]=y,Z[bt]=M;e:for(Ne=y.child;Ne!==null;){if(Ne.tag===5||Ne.tag===6)Z.appendChild(Ne.stateNode);else if(Ne.tag!==4&&Ne.tag!==27&&Ne.child!==null){Ne.child.return=Ne,Ne=Ne.child;continue}if(Ne===y)break e;for(;Ne.sibling===null;){if(Ne.return===null||Ne.return===y)break e;Ne=Ne.return}Ne.sibling.return=Ne.return,Ne=Ne.sibling}y.stateNode=Z;e:switch(ns(Z,q,M),q){case"button":case"input":case"select":case"textarea":M=!!M.autoFocus;break e;case"img":M=!0;break e;default:M=!1}M&&cu(y)}}return xa(y),wj(y,y.type,h===null?null:h.memoizedProps,y.pendingProps,S),null;case 6:if(h&&y.stateNode!=null)h.memoizedProps!==M&&cu(y);else{if(typeof M!="string"&&y.stateNode===null)throw Error(r(166));if(h=$.current,qg(y)){if(h=y.stateNode,S=y.memoizedProps,M=null,q=Ji,q!==null)switch(q.tag){case 27:case 5:M=q.memoizedProps}h[Nt]=y,h=!!(h.nodeValue===S||M!==null&&M.suppressHydrationWarning===!0||GB(h.nodeValue,S)),h||Lm(y,!0)}else h=k_(h).createTextNode(M),h[Nt]=y,y.stateNode=h}return xa(y),null;case 31:if(S=y.memoizedState,h===null||h.memoizedState!==null){if(M=qg(y),S!==null){if(h===null){if(!M)throw Error(r(318));if(h=y.memoizedState,h=h!==null?h.dehydrated:null,!h)throw Error(r(557));h[Nt]=y}else zp(),(y.flags&128)===0&&(y.memoizedState=null),y.flags|=4;xa(y),h=!1}else S=MA(),h!==null&&h.memoizedState!==null&&(h.memoizedState.hydrationErrors=S),h=!0;if(!h)return y.flags&256?(Go(y),y):(Go(y),null);if((y.flags&128)!==0)throw Error(r(558))}return xa(y),null;case 13:if(M=y.memoizedState,h===null||h.memoizedState!==null&&h.memoizedState.dehydrated!==null){if(q=qg(y),M!==null&&M.dehydrated!==null){if(h===null){if(!q)throw Error(r(318));if(q=y.memoizedState,q=q!==null?q.dehydrated:null,!q)throw Error(r(317));q[Nt]=y}else zp(),(y.flags&128)===0&&(y.memoizedState=null),y.flags|=4;xa(y),q=!1}else q=MA(),h!==null&&h.memoizedState!==null&&(h.memoizedState.hydrationErrors=q),q=!0;if(!q)return y.flags&256?(Go(y),y):(Go(y),null)}return Go(y),(y.flags&128)!==0?(y.lanes=S,y):(S=M!==null,h=h!==null&&h.memoizedState!==null,S&&(M=y.child,q=null,M.alternate!==null&&M.alternate.memoizedState!==null&&M.alternate.memoizedState.cachePool!==null&&(q=M.alternate.memoizedState.cachePool.pool),Z=null,M.memoizedState!==null&&M.memoizedState.cachePool!==null&&(Z=M.memoizedState.cachePool.pool),Z!==q&&(M.flags|=2048)),S!==h&&S&&(y.child.flags|=8192),c_(y,y.updateQueue),xa(y),null);case 4:return j(),h===null&&qj(y.stateNode.containerInfo),xa(y),null;case 10:return iu(y.type),xa(y),null;case 19:if(ne(ei),M=y.memoizedState,M===null)return xa(y),null;if(q=(y.flags&128)!==0,Z=M.rendering,Z===null)if(q)tv(M,!1);else{if(za!==0||h!==null&&(h.flags&128)!==0)for(h=y.child;h!==null;){if(Z=YS(h),Z!==null){for(y.flags|=128,tv(M,!1),h=Z.updateQueue,y.updateQueue=h,c_(y,h),y.subtreeFlags=0,h=S,S=y.child;S!==null;)k5(S,h),S=S.sibling;return ce(ei,ei.current&1|2),vr&&ru(y,M.treeForkCount),y.child}h=h.sibling}M.tail!==null&&R()>p_&&(y.flags|=128,q=!0,tv(M,!1),y.lanes=4194304)}else{if(!q)if(h=YS(Z),h!==null){if(y.flags|=128,q=!0,h=h.updateQueue,y.updateQueue=h,c_(y,h),tv(M,!0),M.tail===null&&M.tailMode==="hidden"&&!Z.alternate&&!vr)return xa(y),null}else 2*R()-M.renderingStartTime>p_&&S!==536870912&&(y.flags|=128,q=!0,tv(M,!1),y.lanes=4194304);M.isBackwards?(Z.sibling=y.child,y.child=Z):(h=M.last,h!==null?h.sibling=Z:y.child=Z,M.last=Z)}return M.tail!==null?(h=M.tail,M.rendering=h,M.tail=h.sibling,M.renderingStartTime=R(),h.sibling=null,S=ei.current,ce(ei,q?S&1|2:S&1),vr&&ru(y,M.treeForkCount),h):(xa(y),null);case 22:case 23:return Go(y),$A(),M=y.memoizedState!==null,h!==null?h.memoizedState!==null!==M&&(y.flags|=8192):M&&(y.flags|=8192),M?(S&536870912)!==0&&(y.flags&128)===0&&(xa(y),y.subtreeFlags&6&&(y.flags|=8192)):xa(y),S=y.updateQueue,S!==null&&c_(y,S.retryQueue),S=null,h!==null&&h.memoizedState!==null&&h.memoizedState.cachePool!==null&&(S=h.memoizedState.cachePool.pool),M=null,y.memoizedState!==null&&y.memoizedState.cachePool!==null&&(M=y.memoizedState.cachePool.pool),M!==S&&(y.flags|=2048),h!==null&&ne(Hp),null;case 24:return S=null,h!==null&&(S=h.memoizedState.cache),y.memoizedState.cache!==S&&(y.flags|=2048),iu(si),xa(y),null;case 25:return null;case 30:return null}throw Error(r(156,y.tag))}function Fce(h,y){switch(AA(y),y.tag){case 1:return h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 3:return iu(si),j(),h=y.flags,(h&65536)!==0&&(h&128)===0?(y.flags=h&-65537|128,y):null;case 26:case 27:case 5:return K(y),null;case 31:if(y.memoizedState!==null){if(Go(y),y.alternate===null)throw Error(r(340));zp()}return h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 13:if(Go(y),h=y.memoizedState,h!==null&&h.dehydrated!==null){if(y.alternate===null)throw Error(r(340));zp()}return h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 19:return ne(ei),null;case 4:return j(),null;case 10:return iu(y.type),null;case 22:case 23:return Go(y),$A(),h!==null&&ne(Hp),h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 24:return iu(si),null;case 25:return null;default:return null}}function QU(h,y){switch(AA(y),y.tag){case 3:iu(si),j();break;case 26:case 27:case 5:K(y);break;case 4:j();break;case 31:y.memoizedState!==null&&Go(y);break;case 13:Go(y);break;case 19:ne(ei);break;case 10:iu(y.type);break;case 22:case 23:Go(y),$A(),h!==null&&ne(Hp);break;case 24:iu(si)}}function nv(h,y){try{var S=y.updateQueue,M=S!==null?S.lastEffect:null;if(M!==null){var q=M.next;S=q;do{if((S.tag&h)===h){M=void 0;var Z=S.create,Ne=S.inst;M=Z(),Ne.destroy=M}S=S.next}while(S!==q)}}catch(Be){zr(y,y.return,Be)}}function qm(h,y,S){try{var M=y.updateQueue,q=M!==null?M.lastEffect:null;if(q!==null){var Z=q.next;M=Z;do{if((M.tag&h)===h){var Ne=M.inst,Be=Ne.destroy;if(Be!==void 0){Ne.destroy=void 0,q=y;var at=S,kt=Be;try{kt()}catch(Ot){zr(q,at,Ot)}}}M=M.next}while(M!==Z)}}catch(Ot){zr(y,y.return,Ot)}}function ZU(h){var y=h.updateQueue;if(y!==null){var S=h.stateNode;try{H5(y,S)}catch(M){zr(h,h.return,M)}}}function JU(h,y,S){S.props=Wp(h.type,h.memoizedProps),S.state=h.memoizedState;try{S.componentWillUnmount()}catch(M){zr(h,y,M)}}function rv(h,y){try{var S=h.ref;if(S!==null){switch(h.tag){case 26:case 27:case 5:var M=h.stateNode;break;case 30:M=h.stateNode;break;default:M=h.stateNode}typeof S=="function"?h.refCleanup=S(M):S.current=M}}catch(q){zr(h,y,q)}}function ld(h,y){var S=h.ref,M=h.refCleanup;if(S!==null)if(typeof M=="function")try{M()}catch(q){zr(h,y,q)}finally{h.refCleanup=null,h=h.alternate,h!=null&&(h.refCleanup=null)}else if(typeof S=="function")try{S(null)}catch(q){zr(h,y,q)}else S.current=null}function eB(h){var y=h.type,S=h.memoizedProps,M=h.stateNode;try{e:switch(y){case"button":case"input":case"select":case"textarea":S.autoFocus&&M.focus();break e;case"img":S.src?M.src=S.src:S.srcSet&&(M.srcset=S.srcSet)}}catch(q){zr(h,h.return,q)}}function Sj(h,y,S){try{var M=h.stateNode;nde(M,h.type,S,y),M[bt]=y}catch(q){zr(h,h.return,q)}}function tB(h){return h.tag===5||h.tag===3||h.tag===26||h.tag===27&&Ym(h.type)||h.tag===4}function _j(h){e:for(;;){for(;h.sibling===null;){if(h.return===null||tB(h.return))return null;h=h.return}for(h.sibling.return=h.return,h=h.sibling;h.tag!==5&&h.tag!==6&&h.tag!==18;){if(h.tag===27&&Ym(h.type)||h.flags&2||h.child===null||h.tag===4)continue e;h.child.return=h,h=h.child}if(!(h.flags&2))return h.stateNode}}function kj(h,y,S){var M=h.tag;if(M===5||M===6)h=h.stateNode,y?(S.nodeType===9?S.body:S.nodeName==="HTML"?S.ownerDocument.body:S).insertBefore(h,y):(y=S.nodeType===9?S.body:S.nodeName==="HTML"?S.ownerDocument.body:S,y.appendChild(h),S=S._reactRootContainer,S!=null||y.onclick!==null||(y.onclick=qt));else if(M!==4&&(M===27&&Ym(h.type)&&(S=h.stateNode,y=null),h=h.child,h!==null))for(kj(h,y,S),h=h.sibling;h!==null;)kj(h,y,S),h=h.sibling}function d_(h,y,S){var M=h.tag;if(M===5||M===6)h=h.stateNode,y?S.insertBefore(h,y):S.appendChild(h);else if(M!==4&&(M===27&&Ym(h.type)&&(S=h.stateNode),h=h.child,h!==null))for(d_(h,y,S),h=h.sibling;h!==null;)d_(h,y,S),h=h.sibling}function nB(h){var y=h.stateNode,S=h.memoizedProps;try{for(var M=h.type,q=y.attributes;q.length;)y.removeAttributeNode(q[0]);ns(y,M,S),y[Nt]=h,y[bt]=S}catch(Z){zr(h,h.return,Z)}}var du=!1,ci=!1,Nj=!1,rB=typeof WeakSet=="function"?WeakSet:Set,Ri=null;function Rce(h,y){if(h=h.containerInfo,Gj=M_,h=f5(h),xA(h)){if("selectionStart"in h)var S={start:h.selectionStart,end:h.selectionEnd};else e:{S=(S=h.ownerDocument)&&S.defaultView||window;var M=S.getSelection&&S.getSelection();if(M&&M.rangeCount!==0){S=M.anchorNode;var q=M.anchorOffset,Z=M.focusNode;M=M.focusOffset;try{S.nodeType,Z.nodeType}catch{S=null;break e}var Ne=0,Be=-1,at=-1,kt=0,Ot=0,Ut=h,Ct=null;t:for(;;){for(var Dt;Ut!==S||q!==0&&Ut.nodeType!==3||(Be=Ne+q),Ut!==Z||M!==0&&Ut.nodeType!==3||(at=Ne+M),Ut.nodeType===3&&(Ne+=Ut.nodeValue.length),(Dt=Ut.firstChild)!==null;)Ct=Ut,Ut=Dt;for(;;){if(Ut===h)break t;if(Ct===S&&++kt===q&&(Be=Ne),Ct===Z&&++Ot===M&&(at=Ne),(Dt=Ut.nextSibling)!==null)break;Ut=Ct,Ct=Ut.parentNode}Ut=Dt}S=Be===-1||at===-1?null:{start:Be,end:at}}else S=null}S=S||{start:0,end:0}}else S=null;for(Wj={focusedElem:h,selectionRange:S},M_=!1,Ri=y;Ri!==null;)if(y=Ri,h=y.child,(y.subtreeFlags&1028)!==0&&h!==null)h.return=y,Ri=h;else for(;Ri!==null;){switch(y=Ri,Z=y.alternate,h=y.flags,y.tag){case 0:if((h&4)!==0&&(h=y.updateQueue,h=h!==null?h.events:null,h!==null))for(S=0;S title"))),ns(Z,M,S),Z[Nt]=h,Ke(Z),M=Z;break e;case"link":var Ne=c8("link","href",q).get(M+(S.href||""));if(Ne){for(var Be=0;BeWr&&(Ne=Wr,Wr=Rn,Rn=Ne);var ft=h5(Be,Rn),dt=h5(Be,Wr);if(ft&&dt&&(Dt.rangeCount!==1||Dt.anchorNode!==ft.node||Dt.anchorOffset!==ft.offset||Dt.focusNode!==dt.node||Dt.focusOffset!==dt.offset)){var _t=Ut.createRange();_t.setStart(ft.node,ft.offset),Dt.removeAllRanges(),Rn>Wr?(Dt.addRange(_t),Dt.extend(dt.node,dt.offset)):(_t.setEnd(dt.node,dt.offset),Dt.addRange(_t))}}}}for(Ut=[],Dt=Be;Dt=Dt.parentNode;)Dt.nodeType===1&&Ut.push({element:Dt,left:Dt.scrollLeft,top:Dt.scrollTop});for(typeof Be.focus=="function"&&Be.focus(),Be=0;BeS?32:S,ie.T=null,S=Ej,Ej=null;var Z=Wm,Ne=fu;if(wi=0,rb=Wm=null,fu=0,(Er&6)!==0)throw Error(r(331));var Be=Er;if(Er|=4,pB(Z.current),uB(Z,Z.current,Ne,S),Er=Be,cv(0,!1),Fe&&typeof Fe.onPostCommitFiberRoot=="function")try{Fe.onPostCommitFiberRoot(Me,Z)}catch{}return!0}finally{J.p=q,ie.T=M,EB(h,y)}}function FB(h,y,S){y=Nl(S,y),y=uj(h.stateNode,y,2),h=Um(h,y,2),h!==null&&(gt(h,2),cd(h))}function zr(h,y,S){if(h.tag===3)FB(h,h,S);else for(;y!==null;){if(y.tag===3){FB(y,h,S);break}else if(y.tag===1){var M=y.stateNode;if(typeof y.type.getDerivedStateFromError=="function"||typeof M.componentDidCatch=="function"&&(Gm===null||!Gm.has(M))){h=Nl(S,h),S=RU(2),M=Um(y,S,2),M!==null&&(LU(S,M,y,h),gt(M,2),cd(M));break}}y=y.return}}function Lj(h,y,S){var M=h.pingCache;if(M===null){M=h.pingCache=new Ice;var q=new Set;M.set(y,q)}else q=M.get(y),q===void 0&&(q=new Set,M.set(y,q));q.has(S)||(Tj=!0,q.add(S),h=qce.bind(null,h,y,S),y.then(h,h))}function qce(h,y,S){var M=h.pingCache;M!==null&&M.delete(y),h.pingedLanes|=h.suspendedLanes&S,h.warmLanes&=~S,aa===h&&(br&S)===S&&(za===4||za===3&&(br&62914560)===br&&300>R()-h_?(Er&2)===0&&ab(h,0):Aj|=S,nb===br&&(nb=0)),cd(h)}function RB(h,y){y===0&&(y=Ze()),h=Op(h,y),h!==null&&(gt(h,y),cd(h))}function $ce(h){var y=h.memoizedState,S=0;y!==null&&(S=y.retryLane),RB(h,S)}function Vce(h,y){var S=0;switch(h.tag){case 31:case 13:var M=h.stateNode,q=h.memoizedState;q!==null&&(S=q.retryLane);break;case 19:M=h.stateNode;break;case 22:M=h.stateNode._retryCache;break;default:throw Error(r(314))}M!==null&&M.delete(y),RB(h,S)}function Gce(h,y){return ge(h,y)}var v_=null,sb=null,Oj=!1,w_=!1,Ij=!1,Xm=0;function cd(h){h!==sb&&h.next===null&&(sb===null?v_=sb=h:sb=sb.next=h),w_=!0,Oj||(Oj=!0,Kce())}function cv(h,y){if(!Ij&&w_){Ij=!0;do for(var S=!1,M=v_;M!==null;){if(h!==0){var q=M.pendingLanes;if(q===0)var Z=0;else{var Ne=M.suspendedLanes,Be=M.pingedLanes;Z=(1<<31-qe(42|h)+1)-1,Z&=q&~(Ne&~Be),Z=Z&201326741?Z&201326741|1:Z?Z|2:0}Z!==0&&(S=!0,zB(M,Z))}else Z=br,Z=me(M,M===aa?Z:0,M.cancelPendingCommit!==null||M.timeoutHandle!==-1),(Z&3)===0||ve(M,Z)||(S=!0,zB(M,Z));M=M.next}while(S);Ij=!1}}function Wce(){LB()}function LB(){w_=Oj=!1;var h=0;Xm!==0&&ade()&&(h=Xm);for(var y=R(),S=null,M=v_;M!==null;){var q=M.next,Z=OB(M,y);Z===0?(M.next=null,S===null?v_=q:S.next=q,q===null&&(sb=S)):(S=M,(h!==0||(Z&3)!==0)&&(w_=!0)),M=q}wi!==0&&wi!==5||cv(h),Xm!==0&&(Xm=0)}function OB(h,y){for(var S=h.suspendedLanes,M=h.pingedLanes,q=h.expirationTimes,Z=h.pendingLanes&-62914561;0Be)break;var Ot=at.transferSize,Ut=at.initiatorType;Ot&&WB(Ut)&&(at=at.responseEnd,Ne+=Ot*(at"u"?null:document;function i8(h,y,S){var M=ob;if(M&&typeof y=="string"&&y){var q=En(y);q='link[rel="'+h+'"][href="'+q+'"]',typeof S=="string"&&(q+='[crossorigin="'+S+'"]'),a8.has(q)||(a8.add(q),h={rel:h,crossOrigin:S,href:y},M.querySelector(q)===null&&(y=M.createElement("link"),ns(y,"link",h),Ke(y),M.head.appendChild(y)))}}function hde(h){gu.D(h),i8("dns-prefetch",h,null)}function pde(h,y){gu.C(h,y),i8("preconnect",h,y)}function fde(h,y,S){gu.L(h,y,S);var M=ob;if(M&&h&&y){var q='link[rel="preload"][as="'+En(y)+'"]';y==="image"&&S&&S.imageSrcSet?(q+='[imagesrcset="'+En(S.imageSrcSet)+'"]',typeof S.imageSizes=="string"&&(q+='[imagesizes="'+En(S.imageSizes)+'"]')):q+='[href="'+En(h)+'"]';var Z=q;switch(y){case"style":Z=lb(h);break;case"script":Z=cb(h)}Ml.has(Z)||(h=m({rel:"preload",href:y==="image"&&S&&S.imageSrcSet?void 0:h,as:y},S),Ml.set(Z,h),M.querySelector(q)!==null||y==="style"&&M.querySelector(hv(Z))||y==="script"&&M.querySelector(pv(Z))||(y=M.createElement("link"),ns(y,"link",h),Ke(y),M.head.appendChild(y)))}}function gde(h,y){gu.m(h,y);var S=ob;if(S&&h){var M=y&&typeof y.as=="string"?y.as:"script",q='link[rel="modulepreload"][as="'+En(M)+'"][href="'+En(h)+'"]',Z=q;switch(M){case"audioworklet":case"paintworklet":case"serviceworker":case"sharedworker":case"worker":case"script":Z=cb(h)}if(!Ml.has(Z)&&(h=m({rel:"modulepreload",href:h},y),Ml.set(Z,h),S.querySelector(q)===null)){switch(M){case"audioworklet":case"paintworklet":case"serviceworker":case"sharedworker":case"worker":case"script":if(S.querySelector(pv(Z)))return}M=S.createElement("link"),ns(M,"link",h),Ke(M),S.head.appendChild(M)}}}function bde(h,y,S){gu.S(h,y,S);var M=ob;if(M&&h){var q=et(M).hoistableStyles,Z=lb(h);y=y||"default";var Ne=q.get(Z);if(!Ne){var Be={loading:0,preload:null};if(Ne=M.querySelector(hv(Z)))Be.loading=5;else{h=m({rel:"stylesheet",href:h,"data-precedence":y},S),(S=Ml.get(Z))&&eM(h,S);var at=Ne=M.createElement("link");Ke(at),ns(at,"link",h),at._p=new Promise(function(kt,Ot){at.onload=kt,at.onerror=Ot}),at.addEventListener("load",function(){Be.loading|=1}),at.addEventListener("error",function(){Be.loading|=2}),Be.loading|=4,C_(Ne,y,M)}Ne={type:"stylesheet",instance:Ne,count:1,state:Be},q.set(Z,Ne)}}}function xde(h,y){gu.X(h,y);var S=ob;if(S&&h){var M=et(S).hoistableScripts,q=cb(h),Z=M.get(q);Z||(Z=S.querySelector(pv(q)),Z||(h=m({src:h,async:!0},y),(y=Ml.get(q))&&tM(h,y),Z=S.createElement("script"),Ke(Z),ns(Z,"link",h),S.head.appendChild(Z)),Z={type:"script",instance:Z,count:1,state:null},M.set(q,Z))}}function yde(h,y){gu.M(h,y);var S=ob;if(S&&h){var M=et(S).hoistableScripts,q=cb(h),Z=M.get(q);Z||(Z=S.querySelector(pv(q)),Z||(h=m({src:h,async:!0,type:"module"},y),(y=Ml.get(q))&&tM(h,y),Z=S.createElement("script"),Ke(Z),ns(Z,"link",h),S.head.appendChild(Z)),Z={type:"script",instance:Z,count:1,state:null},M.set(q,Z))}}function s8(h,y,S,M){var q=(q=$.current)?N_(q):null;if(!q)throw Error(r(446));switch(h){case"meta":case"title":return null;case"style":return typeof S.precedence=="string"&&typeof S.href=="string"?(y=lb(S.href),S=et(q).hoistableStyles,M=S.get(y),M||(M={type:"style",instance:null,count:0,state:null},S.set(y,M)),M):{type:"void",instance:null,count:0,state:null};case"link":if(S.rel==="stylesheet"&&typeof S.href=="string"&&typeof S.precedence=="string"){h=lb(S.href);var Z=et(q).hoistableStyles,Ne=Z.get(h);if(Ne||(q=q.ownerDocument||q,Ne={type:"stylesheet",instance:null,count:0,state:{loading:0,preload:null}},Z.set(h,Ne),(Z=q.querySelector(hv(h)))&&!Z._p&&(Ne.instance=Z,Ne.state.loading=5),Ml.has(h)||(S={rel:"preload",as:"style",href:S.href,crossOrigin:S.crossOrigin,integrity:S.integrity,media:S.media,hrefLang:S.hrefLang,referrerPolicy:S.referrerPolicy},Ml.set(h,S),Z||vde(q,h,S,Ne.state))),y&&M===null)throw Error(r(528,""));return Ne}if(y&&M!==null)throw Error(r(529,""));return null;case"script":return y=S.async,S=S.src,typeof S=="string"&&y&&typeof y!="function"&&typeof y!="symbol"?(y=cb(S),S=et(q).hoistableScripts,M=S.get(y),M||(M={type:"script",instance:null,count:0,state:null},S.set(y,M)),M):{type:"void",instance:null,count:0,state:null};default:throw Error(r(444,h))}}function lb(h){return'href="'+En(h)+'"'}function hv(h){return'link[rel="stylesheet"]['+h+"]"}function o8(h){return m({},h,{"data-precedence":h.precedence,precedence:null})}function vde(h,y,S,M){h.querySelector('link[rel="preload"][as="style"]['+y+"]")?M.loading=1:(y=h.createElement("link"),M.preload=y,y.addEventListener("load",function(){return M.loading|=1}),y.addEventListener("error",function(){return M.loading|=2}),ns(y,"link",S),Ke(y),h.head.appendChild(y))}function cb(h){return'[src="'+En(h)+'"]'}function pv(h){return"script[async]"+h}function l8(h,y,S){if(y.count++,y.instance===null)switch(y.type){case"style":var M=h.querySelector('style[data-href~="'+En(S.href)+'"]');if(M)return y.instance=M,Ke(M),M;var q=m({},S,{"data-href":S.href,"data-precedence":S.precedence,href:null,precedence:null});return M=(h.ownerDocument||h).createElement("style"),Ke(M),ns(M,"style",q),C_(M,S.precedence,h),y.instance=M;case"stylesheet":q=lb(S.href);var Z=h.querySelector(hv(q));if(Z)return y.state.loading|=4,y.instance=Z,Ke(Z),Z;M=o8(S),(q=Ml.get(q))&&eM(M,q),Z=(h.ownerDocument||h).createElement("link"),Ke(Z);var Ne=Z;return Ne._p=new Promise(function(Be,at){Ne.onload=Be,Ne.onerror=at}),ns(Z,"link",M),y.state.loading|=4,C_(Z,S.precedence,h),y.instance=Z;case"script":return Z=cb(S.src),(q=h.querySelector(pv(Z)))?(y.instance=q,Ke(q),q):(M=S,(q=Ml.get(Z))&&(M=m({},S),tM(M,q)),h=h.ownerDocument||h,q=h.createElement("script"),Ke(q),ns(q,"link",M),h.head.appendChild(q),y.instance=q);case"void":return null;default:throw Error(r(443,y.type))}else y.type==="stylesheet"&&(y.state.loading&4)===0&&(M=y.instance,y.state.loading|=4,C_(M,S.precedence,h));return y.instance}function C_(h,y,S){for(var M=S.querySelectorAll('link[rel="stylesheet"][data-precedence],style[data-precedence]'),q=M.length?M[M.length-1]:null,Z=q,Ne=0;Ne title"):null)}function wde(h,y,S){if(S===1||y.itemProp!=null)return!1;switch(h){case"meta":case"title":return!0;case"style":if(typeof y.precedence!="string"||typeof y.href!="string"||y.href==="")break;return!0;case"link":if(typeof y.rel!="string"||typeof y.href!="string"||y.href===""||y.onLoad||y.onError)break;return y.rel==="stylesheet"?(h=y.disabled,typeof y.precedence=="string"&&h==null):!0;case"script":if(y.async&&typeof y.async!="function"&&typeof y.async!="symbol"&&!y.onLoad&&!y.onError&&y.src&&typeof y.src=="string")return!0}return!1}function u8(h){return!(h.type==="stylesheet"&&(h.state.loading&3)===0)}function Sde(h,y,S,M){if(S.type==="stylesheet"&&(typeof M.media!="string"||matchMedia(M.media).matches!==!1)&&(S.state.loading&4)===0){if(S.instance===null){var q=lb(M.href),Z=y.querySelector(hv(q));if(Z){y=Z._p,y!==null&&typeof y=="object"&&typeof y.then=="function"&&(h.count++,h=T_.bind(h),y.then(h,h)),S.state.loading|=4,S.instance=Z,Ke(Z);return}Z=y.ownerDocument||y,M=o8(M),(q=Ml.get(q))&&eM(M,q),Z=Z.createElement("link"),Ke(Z);var Ne=Z;Ne._p=new Promise(function(Be,at){Ne.onload=Be,Ne.onerror=at}),ns(Z,"link",M),S.instance=Z}h.stylesheets===null&&(h.stylesheets=new Map),h.stylesheets.set(S,y),(y=S.state.preload)&&(S.state.loading&3)===0&&(h.count++,S=T_.bind(h),y.addEventListener("load",S),y.addEventListener("error",S))}}var nM=0;function _de(h,y){return h.stylesheets&&h.count===0&&j_(h,h.stylesheets),0nM?50:800)+y);return h.unsuspend=S,function(){h.unsuspend=null,clearTimeout(M),clearTimeout(q)}}:null}function T_(){if(this.count--,this.count===0&&(this.imgCount===0||!this.waitingForImages)){if(this.stylesheets)j_(this,this.stylesheets);else if(this.unsuspend){var h=this.unsuspend;this.unsuspend=null,h()}}}var A_=null;function j_(h,y){h.stylesheets=null,h.unsuspend!==null&&(h.count++,A_=new Map,y.forEach(kde,h),A_=null,T_.call(h))}function kde(h,y){if(!(y.state.loading&4)){var S=A_.get(h);if(S)var M=S.get(null);else{S=new Map,A_.set(h,S);for(var q=h.querySelectorAll("link[data-precedence],style[data-precedence]"),Z=0;Z"u"||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!="function"))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(t)}catch(e){console.error(e)}}return t(),uM.exports=Bde(),uM.exports}var qde=Hde();const Hn=t=>typeof t=="string",wv=()=>{let t,e;const n=new Promise((r,i)=>{t=r,e=i});return n.resolve=t,n.reject=e,n},R8=t=>t==null?"":""+t,$de=(t,e,n)=>{t.forEach(r=>{e[r]&&(n[r]=e[r])})},Vde=/###/g,L8=t=>t&&t.indexOf("###")>-1?t.replace(Vde,"."):t,O8=t=>!t||Hn(t),b0=(t,e,n)=>{const r=Hn(e)?e.split("."):e;let i=0;for(;i{const{obj:r,k:i}=b0(t,e,Object);if(r!==void 0||e.length===1){r[i]=n;return}let s=e[e.length-1],o=e.slice(0,e.length-1),l=b0(t,o,Object);for(;l.obj===void 0&&o.length;)s=`${o[o.length-1]}.${s}`,o=o.slice(0,o.length-1),l=b0(t,o,Object),l?.obj&&typeof l.obj[`${l.k}.${s}`]<"u"&&(l.obj=void 0);l.obj[`${l.k}.${s}`]=n},Gde=(t,e,n,r)=>{const{obj:i,k:s}=b0(t,e,Object);i[s]=i[s]||[],i[s].push(n)},sN=(t,e)=>{const{obj:n,k:r}=b0(t,e);if(n&&Object.prototype.hasOwnProperty.call(n,r))return n[r]},Wde=(t,e,n)=>{const r=sN(t,n);return r!==void 0?r:sN(e,n)},OY=(t,e,n)=>{for(const r in e)r!=="__proto__"&&r!=="constructor"&&(r in t?Hn(t[r])||t[r]instanceof String||Hn(e[r])||e[r]instanceof String?n&&(t[r]=e[r]):OY(t[r],e[r],n):t[r]=e[r]);return t},ub=t=>t.replace(/[\-\[\]\/\{\}\(\)\*\+\?\.\\\^\$\|]/g,"\\$&");var Kde={"&":"&","<":"<",">":">",'"':""","'":"'","/":"/"};const Xde=t=>Hn(t)?t.replace(/[&<>"'\/]/g,e=>Kde[e]):t;class Yde{constructor(e){this.capacity=e,this.regExpMap=new Map,this.regExpQueue=[]}getRegExp(e){const n=this.regExpMap.get(e);if(n!==void 0)return n;const r=new RegExp(e);return this.regExpQueue.length===this.capacity&&this.regExpMap.delete(this.regExpQueue.shift()),this.regExpMap.set(e,r),this.regExpQueue.push(e),r}}const Qde=[" ",",","?","!",";"],Zde=new Yde(20),Jde=(t,e,n)=>{e=e||"",n=n||"";const r=Qde.filter(o=>e.indexOf(o)<0&&n.indexOf(o)<0);if(r.length===0)return!0;const i=Zde.getRegExp(`(${r.map(o=>o==="?"?"\\?":o).join("|")})`);let s=!i.test(t);if(!s){const o=t.indexOf(n);o>0&&!i.test(t.substring(0,o))&&(s=!0)}return s},R3=(t,e,n=".")=>{if(!t)return;if(t[e])return Object.prototype.hasOwnProperty.call(t,e)?t[e]:void 0;const r=e.split(n);let i=t;for(let s=0;s-1&&ct?.replace("_","-"),eue={type:"logger",log(t){this.output("log",t)},warn(t){this.output("warn",t)},error(t){this.output("error",t)},output(t,e){console?.[t]?.apply?.(console,e)}};class oN{constructor(e,n={}){this.init(e,n)}init(e,n={}){this.prefix=n.prefix||"i18next:",this.logger=e||eue,this.options=n,this.debug=n.debug}log(...e){return this.forward(e,"log","",!0)}warn(...e){return this.forward(e,"warn","",!0)}error(...e){return this.forward(e,"error","")}deprecate(...e){return this.forward(e,"warn","WARNING DEPRECATED: ",!0)}forward(e,n,r,i){return i&&!this.debug?null:(Hn(e[0])&&(e[0]=`${r}${this.prefix} ${e[0]}`),this.logger[n](e))}create(e){return new oN(this.logger,{prefix:`${this.prefix}:${e}:`,...this.options})}clone(e){return e=e||this.options,e.prefix=e.prefix||this.prefix,new oN(this.logger,e)}}var Cd=new oN;let EP=class{constructor(){this.observers={}}on(e,n){return e.split(" ").forEach(r=>{this.observers[r]||(this.observers[r]=new Map);const i=this.observers[r].get(n)||0;this.observers[r].set(n,i+1)}),this}off(e,n){if(this.observers[e]){if(!n){delete this.observers[e];return}this.observers[e].delete(n)}}emit(e,...n){this.observers[e]&&Array.from(this.observers[e].entries()).forEach(([i,s])=>{for(let o=0;o{for(let o=0;o-1&&this.options.ns.splice(n,1)}getResource(e,n,r,i={}){const s=i.keySeparator!==void 0?i.keySeparator:this.options.keySeparator,o=i.ignoreJSONStructure!==void 0?i.ignoreJSONStructure:this.options.ignoreJSONStructure;let l;e.indexOf(".")>-1?l=e.split("."):(l=[e,n],r&&(Array.isArray(r)?l.push(...r):Hn(r)&&s?l.push(...r.split(s)):l.push(r)));const c=sN(this.data,l);return!c&&!n&&!r&&e.indexOf(".")>-1&&(e=l[0],n=l[1],r=l.slice(2).join(".")),c||!o||!Hn(r)?c:R3(this.data?.[e]?.[n],r,s)}addResource(e,n,r,i,s={silent:!1}){const o=s.keySeparator!==void 0?s.keySeparator:this.options.keySeparator;let l=[e,n];r&&(l=l.concat(o?r.split(o):r)),e.indexOf(".")>-1&&(l=e.split("."),i=n,n=l[1]),this.addNamespaces(n),I8(this.data,l,i),s.silent||this.emit("added",e,n,r,i)}addResources(e,n,r,i={silent:!1}){for(const s in r)(Hn(r[s])||Array.isArray(r[s]))&&this.addResource(e,n,s,r[s],{silent:!0});i.silent||this.emit("added",e,n,r)}addResourceBundle(e,n,r,i,s,o={silent:!1,skipCopy:!1}){let l=[e,n];e.indexOf(".")>-1&&(l=e.split("."),i=r,r=n,n=l[1]),this.addNamespaces(n);let c=sN(this.data,l)||{};o.skipCopy||(r=JSON.parse(JSON.stringify(r))),i?OY(c,r,s):c={...c,...r},I8(this.data,l,c),o.silent||this.emit("added",e,n,r)}removeResourceBundle(e,n){this.hasResourceBundle(e,n)&&delete this.data[e][n],this.removeNamespaces(n),this.emit("removed",e,n)}hasResourceBundle(e,n){return this.getResource(e,n)!==void 0}getResourceBundle(e,n){return n||(n=this.options.defaultNS),this.getResource(e,n)}getDataByLanguage(e){return this.data[e]}hasLanguageSomeTranslations(e){const n=this.getDataByLanguage(e);return!!(n&&Object.keys(n)||[]).find(i=>n[i]&&Object.keys(n[i]).length>0)}toJSON(){return this.data}}var IY={processors:{},addPostProcessor(t){this.processors[t.name]=t},handle(t,e,n,r,i){return t.forEach(s=>{e=this.processors[s]?.process(e,n,r,i)??e}),e}};const zY=Symbol("i18next/PATH_KEY");function tue(){const t=[],e=Object.create(null);let n;return e.get=(r,i)=>(n?.revoke?.(),i===zY?t:(t.push(i),n=Proxy.revocable(r,e),n.proxy)),Proxy.revocable(Object.create(null),e).proxy}function L3(t,e){const{[zY]:n}=t(tue());return n.join(e?.keySeparator??".")}const U8={},fM=t=>!Hn(t)&&typeof t!="boolean"&&typeof t!="number";class lN extends EP{constructor(e,n={}){super(),$de(["resourceStore","languageUtils","pluralResolver","interpolator","backendConnector","i18nFormat","utils"],e,this),this.options=n,this.options.keySeparator===void 0&&(this.options.keySeparator="."),this.logger=Cd.create("translator")}changeLanguage(e){e&&(this.language=e)}exists(e,n={interpolation:{}}){const r={...n};if(e==null)return!1;const i=this.resolve(e,r);if(i?.res===void 0)return!1;const s=fM(i.res);return!(r.returnObjects===!1&&s)}extractFromKey(e,n){let r=n.nsSeparator!==void 0?n.nsSeparator:this.options.nsSeparator;r===void 0&&(r=":");const i=n.keySeparator!==void 0?n.keySeparator:this.options.keySeparator;let s=n.ns||this.options.defaultNS||[];const o=r&&e.indexOf(r)>-1,l=!this.options.userDefinedKeySeparator&&!n.keySeparator&&!this.options.userDefinedNsSeparator&&!n.nsSeparator&&!Jde(e,r,i);if(o&&!l){const c=e.match(this.interpolator.nestingRegexp);if(c&&c.length>0)return{key:e,namespaces:Hn(s)?[s]:s};const d=e.split(r);(r!==i||r===i&&this.options.ns.indexOf(d[0])>-1)&&(s=d.shift()),e=d.join(i)}return{key:e,namespaces:Hn(s)?[s]:s}}translate(e,n,r){let i=typeof n=="object"?{...n}:n;if(typeof i!="object"&&this.options.overloadTranslationOptionHandler&&(i=this.options.overloadTranslationOptionHandler(arguments)),typeof i=="object"&&(i={...i}),i||(i={}),e==null)return"";typeof e=="function"&&(e=L3(e,{...this.options,...i})),Array.isArray(e)||(e=[String(e)]);const s=i.returnDetails!==void 0?i.returnDetails:this.options.returnDetails,o=i.keySeparator!==void 0?i.keySeparator:this.options.keySeparator,{key:l,namespaces:c}=this.extractFromKey(e[e.length-1],i),d=c[c.length-1];let u=i.nsSeparator!==void 0?i.nsSeparator:this.options.nsSeparator;u===void 0&&(u=":");const m=i.lng||this.language,p=i.appendNamespaceToCIMode||this.options.appendNamespaceToCIMode;if(m?.toLowerCase()==="cimode")return p?s?{res:`${d}${u}${l}`,usedKey:l,exactUsedKey:l,usedLng:m,usedNS:d,usedParams:this.getUsedParamsDetails(i)}:`${d}${u}${l}`:s?{res:l,usedKey:l,exactUsedKey:l,usedLng:m,usedNS:d,usedParams:this.getUsedParamsDetails(i)}:l;const f=this.resolve(e,i);let x=f?.res;const v=f?.usedKey||l,g=f?.exactUsedKey||l,b=["[object Number]","[object Function]","[object RegExp]"],_=i.joinArrays!==void 0?i.joinArrays:this.options.joinArrays,C=!this.i18nFormat||this.i18nFormat.handleAsObject,P=i.count!==void 0&&!Hn(i.count),N=lN.hasDefaultValue(i),A=P?this.pluralResolver.getSuffix(m,i.count,i):"",T=i.ordinal&&P?this.pluralResolver.getSuffix(m,i.count,{ordinal:!1}):"",F=P&&!i.ordinal&&i.count===0,k=F&&i[`defaultValue${this.options.pluralSeparator}zero`]||i[`defaultValue${A}`]||i[`defaultValue${T}`]||i.defaultValue;let D=x;C&&!x&&N&&(D=k);const H=fM(D),z=Object.prototype.toString.apply(D);if(C&&D&&H&&b.indexOf(z)<0&&!(Hn(_)&&Array.isArray(D))){if(!i.returnObjects&&!this.options.returnObjects){this.options.returnedObjectHandler||this.logger.warn("accessing an object - but returnObjects options is not enabled!");const X=this.options.returnedObjectHandler?this.options.returnedObjectHandler(v,D,{...i,ns:c}):`key '${l} (${this.language})' returned an object instead of string.`;return s?(f.res=X,f.usedParams=this.getUsedParamsDetails(i),f):X}if(o){const X=Array.isArray(D),L=X?[]:{},te=X?g:v;for(const ie in D)if(Object.prototype.hasOwnProperty.call(D,ie)){const J=`${te}${o}${ie}`;N&&!x?L[ie]=this.translate(J,{...i,defaultValue:fM(k)?k[ie]:void 0,joinArrays:!1,ns:c}):L[ie]=this.translate(J,{...i,joinArrays:!1,ns:c}),L[ie]===J&&(L[ie]=D[ie])}x=L}}else if(C&&Hn(_)&&Array.isArray(x))x=x.join(_),x&&(x=this.extendTranslation(x,e,i,r));else{let X=!1,L=!1;!this.isValidLookup(x)&&N&&(X=!0,x=k),this.isValidLookup(x)||(L=!0,x=l);const ie=(i.missingKeyNoValueFallbackToKey||this.options.missingKeyNoValueFallbackToKey)&&L?void 0:x,J=N&&k!==x&&this.options.updateMissing;if(L||X||J){if(this.logger.log(J?"updateKey":"missingKey",m,d,l,J?k:x),o){const W=this.resolve(l,{...i,keySeparator:!1});W&&W.res&&this.logger.warn("Seems the loaded translations were in flat JSON format instead of nested. Either set keySeparator: false on init or make sure your translations are published in nested format.")}let ue=[];const oe=this.languageUtils.getFallbackCodes(this.options.fallbackLng,i.lng||this.language);if(this.options.saveMissingTo==="fallback"&&oe&&oe[0])for(let W=0;W{const xe=N&&ce!==x?ce:ie;this.options.missingKeyHandler?this.options.missingKeyHandler(W,d,ne,xe,J,i):this.backendConnector?.saveMissing&&this.backendConnector.saveMissing(W,d,ne,xe,J,i),this.emit("missingKey",W,d,ne,x)};this.options.saveMissing&&(this.options.saveMissingPlurals&&P?ue.forEach(W=>{const ne=this.pluralResolver.getSuffixes(W,i);F&&i[`defaultValue${this.options.pluralSeparator}zero`]&&ne.indexOf(`${this.options.pluralSeparator}zero`)<0&&ne.push(`${this.options.pluralSeparator}zero`),ne.forEach(ce=>{le([W],l+ce,i[`defaultValue${ce}`]||k)})}):le(ue,l,k))}x=this.extendTranslation(x,e,i,f,r),L&&x===l&&this.options.appendNamespaceToMissingKey&&(x=`${d}${u}${l}`),(L||X)&&this.options.parseMissingKeyHandler&&(x=this.options.parseMissingKeyHandler(this.options.appendNamespaceToMissingKey?`${d}${u}${l}`:l,X?x:void 0,i))}return s?(f.res=x,f.usedParams=this.getUsedParamsDetails(i),f):x}extendTranslation(e,n,r,i,s){if(this.i18nFormat?.parse)e=this.i18nFormat.parse(e,{...this.options.interpolation.defaultVariables,...r},r.lng||this.language||i.usedLng,i.usedNS,i.usedKey,{resolved:i});else if(!r.skipInterpolation){r.interpolation&&this.interpolator.init({...r,interpolation:{...this.options.interpolation,...r.interpolation}});const c=Hn(e)&&(r?.interpolation?.skipOnVariables!==void 0?r.interpolation.skipOnVariables:this.options.interpolation.skipOnVariables);let d;if(c){const m=e.match(this.interpolator.nestingRegexp);d=m&&m.length}let u=r.replace&&!Hn(r.replace)?r.replace:r;if(this.options.interpolation.defaultVariables&&(u={...this.options.interpolation.defaultVariables,...u}),e=this.interpolator.interpolate(e,u,r.lng||this.language||i.usedLng,r),c){const m=e.match(this.interpolator.nestingRegexp),p=m&&m.length;ds?.[0]===m[0]&&!r.context?(this.logger.warn(`It seems you are nesting recursively key: ${m[0]} in key: ${n[0]}`),null):this.translate(...m,n),r)),r.interpolation&&this.interpolator.reset()}const o=r.postProcess||this.options.postProcess,l=Hn(o)?[o]:o;return e!=null&&l?.length&&r.applyPostProcessor!==!1&&(e=IY.handle(l,e,n,this.options&&this.options.postProcessPassResolved?{i18nResolved:{...i,usedParams:this.getUsedParamsDetails(r)},...r}:r,this)),e}resolve(e,n={}){let r,i,s,o,l;return Hn(e)&&(e=[e]),e.forEach(c=>{if(this.isValidLookup(r))return;const d=this.extractFromKey(c,n),u=d.key;i=u;let m=d.namespaces;this.options.fallbackNS&&(m=m.concat(this.options.fallbackNS));const p=n.count!==void 0&&!Hn(n.count),f=p&&!n.ordinal&&n.count===0,x=n.context!==void 0&&(Hn(n.context)||typeof n.context=="number")&&n.context!=="",v=n.lngs?n.lngs:this.languageUtils.toResolveHierarchy(n.lng||this.language,n.fallbackLng);m.forEach(g=>{this.isValidLookup(r)||(l=g,!U8[`${v[0]}-${g}`]&&this.utils?.hasLoadedNamespace&&!this.utils?.hasLoadedNamespace(l)&&(U8[`${v[0]}-${g}`]=!0,this.logger.warn(`key "${i}" for languages "${v.join(", ")}" won't get resolved as namespace "${l}" was not yet loaded`,"This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!")),v.forEach(b=>{if(this.isValidLookup(r))return;o=b;const _=[u];if(this.i18nFormat?.addLookupKeys)this.i18nFormat.addLookupKeys(_,u,b,g,n);else{let P;p&&(P=this.pluralResolver.getSuffix(b,n.count,n));const N=`${this.options.pluralSeparator}zero`,A=`${this.options.pluralSeparator}ordinal${this.options.pluralSeparator}`;if(p&&(n.ordinal&&P.indexOf(A)===0&&_.push(u+P.replace(A,this.options.pluralSeparator)),_.push(u+P),f&&_.push(u+N)),x){const T=`${u}${this.options.contextSeparator||"_"}${n.context}`;_.push(T),p&&(n.ordinal&&P.indexOf(A)===0&&_.push(T+P.replace(A,this.options.pluralSeparator)),_.push(T+P),f&&_.push(T+N))}}let C;for(;C=_.pop();)this.isValidLookup(r)||(s=C,r=this.getResource(b,g,C,n))}))})}),{res:r,usedKey:i,exactUsedKey:s,usedLng:o,usedNS:l}}isValidLookup(e){return e!==void 0&&!(!this.options.returnNull&&e===null)&&!(!this.options.returnEmptyString&&e==="")}getResource(e,n,r,i={}){return this.i18nFormat?.getResource?this.i18nFormat.getResource(e,n,r,i):this.resourceStore.getResource(e,n,r,i)}getUsedParamsDetails(e={}){const n=["defaultValue","ordinal","context","replace","lng","lngs","fallbackLng","ns","keySeparator","nsSeparator","returnObjects","returnDetails","joinArrays","postProcess","interpolation"],r=e.replace&&!Hn(e.replace);let i=r?e.replace:e;if(r&&typeof e.count<"u"&&(i.count=e.count),this.options.interpolation.defaultVariables&&(i={...this.options.interpolation.defaultVariables,...i}),!r){i={...i};for(const s of n)delete i[s]}return i}static hasDefaultValue(e){const n="defaultValue";for(const r in e)if(Object.prototype.hasOwnProperty.call(e,r)&&n===r.substring(0,n.length)&&e[r]!==void 0)return!0;return!1}}class B8{constructor(e){this.options=e,this.supportedLngs=this.options.supportedLngs||!1,this.logger=Cd.create("languageUtils")}getScriptPartFromCode(e){if(e=$0(e),!e||e.indexOf("-")<0)return null;const n=e.split("-");return n.length===2||(n.pop(),n[n.length-1].toLowerCase()==="x")?null:this.formatLanguageCode(n.join("-"))}getLanguagePartFromCode(e){if(e=$0(e),!e||e.indexOf("-")<0)return e;const n=e.split("-");return this.formatLanguageCode(n[0])}formatLanguageCode(e){if(Hn(e)&&e.indexOf("-")>-1){let n;try{n=Intl.getCanonicalLocales(e)[0]}catch{}return n&&this.options.lowerCaseLng&&(n=n.toLowerCase()),n||(this.options.lowerCaseLng?e.toLowerCase():e)}return this.options.cleanCode||this.options.lowerCaseLng?e.toLowerCase():e}isSupportedCode(e){return(this.options.load==="languageOnly"||this.options.nonExplicitSupportedLngs)&&(e=this.getLanguagePartFromCode(e)),!this.supportedLngs||!this.supportedLngs.length||this.supportedLngs.indexOf(e)>-1}getBestMatchFromCodes(e){if(!e)return null;let n;return e.forEach(r=>{if(n)return;const i=this.formatLanguageCode(r);(!this.options.supportedLngs||this.isSupportedCode(i))&&(n=i)}),!n&&this.options.supportedLngs&&e.forEach(r=>{if(n)return;const i=this.getScriptPartFromCode(r);if(this.isSupportedCode(i))return n=i;const s=this.getLanguagePartFromCode(r);if(this.isSupportedCode(s))return n=s;n=this.options.supportedLngs.find(o=>{if(o===s)return o;if(!(o.indexOf("-")<0&&s.indexOf("-")<0)&&(o.indexOf("-")>0&&s.indexOf("-")<0&&o.substring(0,o.indexOf("-"))===s||o.indexOf(s)===0&&s.length>1))return o})}),n||(n=this.getFallbackCodes(this.options.fallbackLng)[0]),n}getFallbackCodes(e,n){if(!e)return[];if(typeof e=="function"&&(e=e(n)),Hn(e)&&(e=[e]),Array.isArray(e))return e;if(!n)return e.default||[];let r=e[n];return r||(r=e[this.getScriptPartFromCode(n)]),r||(r=e[this.formatLanguageCode(n)]),r||(r=e[this.getLanguagePartFromCode(n)]),r||(r=e.default),r||[]}toResolveHierarchy(e,n){const r=this.getFallbackCodes((n===!1?[]:n)||this.options.fallbackLng||[],e),i=[],s=o=>{o&&(this.isSupportedCode(o)?i.push(o):this.logger.warn(`rejecting language code not found in supportedLngs: ${o}`))};return Hn(e)&&(e.indexOf("-")>-1||e.indexOf("_")>-1)?(this.options.load!=="languageOnly"&&s(this.formatLanguageCode(e)),this.options.load!=="languageOnly"&&this.options.load!=="currentOnly"&&s(this.getScriptPartFromCode(e)),this.options.load!=="currentOnly"&&s(this.getLanguagePartFromCode(e))):Hn(e)&&s(this.formatLanguageCode(e)),r.forEach(o=>{i.indexOf(o)<0&&s(this.formatLanguageCode(o))}),i}}const H8={zero:0,one:1,two:2,few:3,many:4,other:5},q8={select:t=>t===1?"one":"other",resolvedOptions:()=>({pluralCategories:["one","other"]})};class nue{constructor(e,n={}){this.languageUtils=e,this.options=n,this.logger=Cd.create("pluralResolver"),this.pluralRulesCache={}}addRule(e,n){this.rules[e]=n}clearCache(){this.pluralRulesCache={}}getRule(e,n={}){const r=$0(e==="dev"?"en":e),i=n.ordinal?"ordinal":"cardinal",s=JSON.stringify({cleanedCode:r,type:i});if(s in this.pluralRulesCache)return this.pluralRulesCache[s];let o;try{o=new Intl.PluralRules(r,{type:i})}catch{if(!Intl)return this.logger.error("No Intl support, please use an Intl polyfill!"),q8;if(!e.match(/-|_/))return q8;const c=this.languageUtils.getLanguagePartFromCode(e);o=this.getRule(c,n)}return this.pluralRulesCache[s]=o,o}needsPlural(e,n={}){let r=this.getRule(e,n);return r||(r=this.getRule("dev",n)),r?.resolvedOptions().pluralCategories.length>1}getPluralFormsOfKey(e,n,r={}){return this.getSuffixes(e,r).map(i=>`${n}${i}`)}getSuffixes(e,n={}){let r=this.getRule(e,n);return r||(r=this.getRule("dev",n)),r?r.resolvedOptions().pluralCategories.sort((i,s)=>H8[i]-H8[s]).map(i=>`${this.options.prepend}${n.ordinal?`ordinal${this.options.prepend}`:""}${i}`):[]}getSuffix(e,n,r={}){const i=this.getRule(e,r);return i?`${this.options.prepend}${r.ordinal?`ordinal${this.options.prepend}`:""}${i.select(n)}`:(this.logger.warn(`no plural rule found for: ${e}`),this.getSuffix("dev",n,r))}}const $8=(t,e,n,r=".",i=!0)=>{let s=Wde(t,e,n);return!s&&i&&Hn(n)&&(s=R3(t,n,r),s===void 0&&(s=R3(e,n,r))),s},gM=t=>t.replace(/\$/g,"$$$$");class rue{constructor(e={}){this.logger=Cd.create("interpolator"),this.options=e,this.format=e?.interpolation?.format||(n=>n),this.init(e)}init(e={}){e.interpolation||(e.interpolation={escapeValue:!0});const{escape:n,escapeValue:r,useRawValueToEscape:i,prefix:s,prefixEscaped:o,suffix:l,suffixEscaped:c,formatSeparator:d,unescapeSuffix:u,unescapePrefix:m,nestingPrefix:p,nestingPrefixEscaped:f,nestingSuffix:x,nestingSuffixEscaped:v,nestingOptionsSeparator:g,maxReplaces:b,alwaysFormat:_}=e.interpolation;this.escape=n!==void 0?n:Xde,this.escapeValue=r!==void 0?r:!0,this.useRawValueToEscape=i!==void 0?i:!1,this.prefix=s?ub(s):o||"{{",this.suffix=l?ub(l):c||"}}",this.formatSeparator=d||",",this.unescapePrefix=u?"":m||"-",this.unescapeSuffix=this.unescapePrefix?"":u||"",this.nestingPrefix=p?ub(p):f||ub("$t("),this.nestingSuffix=x?ub(x):v||ub(")"),this.nestingOptionsSeparator=g||",",this.maxReplaces=b||1e3,this.alwaysFormat=_!==void 0?_:!1,this.resetRegExp()}reset(){this.options&&this.init(this.options)}resetRegExp(){const e=(n,r)=>n?.source===r?(n.lastIndex=0,n):new RegExp(r,"g");this.regexp=e(this.regexp,`${this.prefix}(.+?)${this.suffix}`),this.regexpUnescape=e(this.regexpUnescape,`${this.prefix}${this.unescapePrefix}(.+?)${this.unescapeSuffix}${this.suffix}`),this.nestingRegexp=e(this.nestingRegexp,`${this.nestingPrefix}((?:[^()"']+|"[^"]*"|'[^']*'|\\((?:[^()]|"[^"]*"|'[^']*')*\\))*?)${this.nestingSuffix}`)}interpolate(e,n,r,i){let s,o,l;const c=this.options&&this.options.interpolation&&this.options.interpolation.defaultVariables||{},d=f=>{if(f.indexOf(this.formatSeparator)<0){const b=$8(n,c,f,this.options.keySeparator,this.options.ignoreJSONStructure);return this.alwaysFormat?this.format(b,void 0,r,{...i,...n,interpolationkey:f}):b}const x=f.split(this.formatSeparator),v=x.shift().trim(),g=x.join(this.formatSeparator).trim();return this.format($8(n,c,v,this.options.keySeparator,this.options.ignoreJSONStructure),g,r,{...i,...n,interpolationkey:v})};this.resetRegExp();const u=i?.missingInterpolationHandler||this.options.missingInterpolationHandler,m=i?.interpolation?.skipOnVariables!==void 0?i.interpolation.skipOnVariables:this.options.interpolation.skipOnVariables;return[{regex:this.regexpUnescape,safeValue:f=>gM(f)},{regex:this.regexp,safeValue:f=>this.escapeValue?gM(this.escape(f)):gM(f)}].forEach(f=>{for(l=0;s=f.regex.exec(e);){const x=s[1].trim();if(o=d(x),o===void 0)if(typeof u=="function"){const g=u(e,s,i);o=Hn(g)?g:""}else if(i&&Object.prototype.hasOwnProperty.call(i,x))o="";else if(m){o=s[0];continue}else this.logger.warn(`missed to pass in variable ${x} for interpolating ${e}`),o="";else!Hn(o)&&!this.useRawValueToEscape&&(o=R8(o));const v=f.safeValue(o);if(e=e.replace(s[0],v),m?(f.regex.lastIndex+=o.length,f.regex.lastIndex-=s[0].length):f.regex.lastIndex=0,l++,l>=this.maxReplaces)break}}),e}nest(e,n,r={}){let i,s,o;const l=(c,d)=>{const u=this.nestingOptionsSeparator;if(c.indexOf(u)<0)return c;const m=c.split(new RegExp(`${u}[ ]*{`));let p=`{${m[1]}`;c=m[0],p=this.interpolate(p,o);const f=p.match(/'/g),x=p.match(/"/g);((f?.length??0)%2===0&&!x||x.length%2!==0)&&(p=p.replace(/'/g,'"'));try{o=JSON.parse(p),d&&(o={...d,...o})}catch(v){return this.logger.warn(`failed parsing options string in nesting for key ${c}`,v),`${c}${u}${p}`}return o.defaultValue&&o.defaultValue.indexOf(this.prefix)>-1&&delete o.defaultValue,c};for(;i=this.nestingRegexp.exec(e);){let c=[];o={...r},o=o.replace&&!Hn(o.replace)?o.replace:o,o.applyPostProcessor=!1,delete o.defaultValue;const d=/{.*}/.test(i[1])?i[1].lastIndexOf("}")+1:i[1].indexOf(this.formatSeparator);if(d!==-1&&(c=i[1].slice(d).split(this.formatSeparator).map(u=>u.trim()).filter(Boolean),i[1]=i[1].slice(0,d)),s=n(l.call(this,i[1].trim(),o),o),s&&i[0]===e&&!Hn(s))return s;Hn(s)||(s=R8(s)),s||(this.logger.warn(`missed to resolve ${i[1]} for nesting ${e}`),s=""),c.length&&(s=c.reduce((u,m)=>this.format(u,m,r.lng,{...r,interpolationkey:i[1].trim()}),s.trim())),e=e.replace(i[0],s),this.regexp.lastIndex=0}return e}}const aue=t=>{let e=t.toLowerCase().trim();const n={};if(t.indexOf("(")>-1){const r=t.split("(");e=r[0].toLowerCase().trim();const i=r[1].substring(0,r[1].length-1);e==="currency"&&i.indexOf(":")<0?n.currency||(n.currency=i.trim()):e==="relativetime"&&i.indexOf(":")<0?n.range||(n.range=i.trim()):i.split(";").forEach(o=>{if(o){const[l,...c]=o.split(":"),d=c.join(":").trim().replace(/^'+|'+$/g,""),u=l.trim();n[u]||(n[u]=d),d==="false"&&(n[u]=!1),d==="true"&&(n[u]=!0),isNaN(d)||(n[u]=parseInt(d,10))}})}return{formatName:e,formatOptions:n}},V8=t=>{const e={};return(n,r,i)=>{let s=i;i&&i.interpolationkey&&i.formatParams&&i.formatParams[i.interpolationkey]&&i[i.interpolationkey]&&(s={...s,[i.interpolationkey]:void 0});const o=r+JSON.stringify(s);let l=e[o];return l||(l=t($0(r),i),e[o]=l),l(n)}},iue=t=>(e,n,r)=>t($0(n),r)(e);class sue{constructor(e={}){this.logger=Cd.create("formatter"),this.options=e,this.init(e)}init(e,n={interpolation:{}}){this.formatSeparator=n.interpolation.formatSeparator||",";const r=n.cacheInBuiltFormats?V8:iue;this.formats={number:r((i,s)=>{const o=new Intl.NumberFormat(i,{...s});return l=>o.format(l)}),currency:r((i,s)=>{const o=new Intl.NumberFormat(i,{...s,style:"currency"});return l=>o.format(l)}),datetime:r((i,s)=>{const o=new Intl.DateTimeFormat(i,{...s});return l=>o.format(l)}),relativetime:r((i,s)=>{const o=new Intl.RelativeTimeFormat(i,{...s});return l=>o.format(l,s.range||"day")}),list:r((i,s)=>{const o=new Intl.ListFormat(i,{...s});return l=>o.format(l)})}}add(e,n){this.formats[e.toLowerCase().trim()]=n}addCached(e,n){this.formats[e.toLowerCase().trim()]=V8(n)}format(e,n,r,i={}){const s=n.split(this.formatSeparator);if(s.length>1&&s[0].indexOf("(")>1&&s[0].indexOf(")")<0&&s.find(l=>l.indexOf(")")>-1)){const l=s.findIndex(c=>c.indexOf(")")>-1);s[0]=[s[0],...s.splice(1,l)].join(this.formatSeparator)}return s.reduce((l,c)=>{const{formatName:d,formatOptions:u}=aue(c);if(this.formats[d]){let m=l;try{const p=i?.formatParams?.[i.interpolationkey]||{},f=p.locale||p.lng||i.locale||i.lng||r;m=this.formats[d](l,f,{...u,...i,...p})}catch(p){this.logger.warn(p)}return m}else this.logger.warn(`there was no format function for ${d}`);return l},e)}}const oue=(t,e)=>{t.pending[e]!==void 0&&(delete t.pending[e],t.pendingCount--)};class lue extends EP{constructor(e,n,r,i={}){super(),this.backend=e,this.store=n,this.services=r,this.languageUtils=r.languageUtils,this.options=i,this.logger=Cd.create("backendConnector"),this.waitingReads=[],this.maxParallelReads=i.maxParallelReads||10,this.readingCalls=0,this.maxRetries=i.maxRetries>=0?i.maxRetries:5,this.retryTimeout=i.retryTimeout>=1?i.retryTimeout:350,this.state={},this.queue=[],this.backend?.init?.(r,i.backend,i)}queueLoad(e,n,r,i){const s={},o={},l={},c={};return e.forEach(d=>{let u=!0;n.forEach(m=>{const p=`${d}|${m}`;!r.reload&&this.store.hasResourceBundle(d,m)?this.state[p]=2:this.state[p]<0||(this.state[p]===1?o[p]===void 0&&(o[p]=!0):(this.state[p]=1,u=!1,o[p]===void 0&&(o[p]=!0),s[p]===void 0&&(s[p]=!0),c[m]===void 0&&(c[m]=!0)))}),u||(l[d]=!0)}),(Object.keys(s).length||Object.keys(o).length)&&this.queue.push({pending:o,pendingCount:Object.keys(o).length,loaded:{},errors:[],callback:i}),{toLoad:Object.keys(s),pending:Object.keys(o),toLoadLanguages:Object.keys(l),toLoadNamespaces:Object.keys(c)}}loaded(e,n,r){const i=e.split("|"),s=i[0],o=i[1];n&&this.emit("failedLoading",s,o,n),!n&&r&&this.store.addResourceBundle(s,o,r,void 0,void 0,{skipCopy:!0}),this.state[e]=n?-1:2,n&&r&&(this.state[e]=0);const l={};this.queue.forEach(c=>{Gde(c.loaded,[s],o),oue(c,e),n&&c.errors.push(n),c.pendingCount===0&&!c.done&&(Object.keys(c.loaded).forEach(d=>{l[d]||(l[d]={});const u=c.loaded[d];u.length&&u.forEach(m=>{l[d][m]===void 0&&(l[d][m]=!0)})}),c.done=!0,c.errors.length?c.callback(c.errors):c.callback())}),this.emit("loaded",l),this.queue=this.queue.filter(c=>!c.done)}read(e,n,r,i=0,s=this.retryTimeout,o){if(!e.length)return o(null,{});if(this.readingCalls>=this.maxParallelReads){this.waitingReads.push({lng:e,ns:n,fcName:r,tried:i,wait:s,callback:o});return}this.readingCalls++;const l=(d,u)=>{if(this.readingCalls--,this.waitingReads.length>0){const m=this.waitingReads.shift();this.read(m.lng,m.ns,m.fcName,m.tried,m.wait,m.callback)}if(d&&u&&i{this.read.call(this,e,n,r,i+1,s*2,o)},s);return}o(d,u)},c=this.backend[r].bind(this.backend);if(c.length===2){try{const d=c(e,n);d&&typeof d.then=="function"?d.then(u=>l(null,u)).catch(l):l(null,d)}catch(d){l(d)}return}return c(e,n,l)}prepareLoading(e,n,r={},i){if(!this.backend)return this.logger.warn("No backend was added via i18next.use. Will not load resources."),i&&i();Hn(e)&&(e=this.languageUtils.toResolveHierarchy(e)),Hn(n)&&(n=[n]);const s=this.queueLoad(e,n,r,i);if(!s.toLoad.length)return s.pending.length||i(),null;s.toLoad.forEach(o=>{this.loadOne(o)})}load(e,n,r){this.prepareLoading(e,n,{},r)}reload(e,n,r){this.prepareLoading(e,n,{reload:!0},r)}loadOne(e,n=""){const r=e.split("|"),i=r[0],s=r[1];this.read(i,s,"read",void 0,void 0,(o,l)=>{o&&this.logger.warn(`${n}loading namespace ${s} for language ${i} failed`,o),!o&&l&&this.logger.log(`${n}loaded namespace ${s} for language ${i}`,l),this.loaded(e,o,l)})}saveMissing(e,n,r,i,s,o={},l=()=>{}){if(this.services?.utils?.hasLoadedNamespace&&!this.services?.utils?.hasLoadedNamespace(n)){this.logger.warn(`did not save key "${r}" as the namespace "${n}" was not yet loaded`,"This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!");return}if(!(r==null||r==="")){if(this.backend?.create){const c={...o,isUpdate:s},d=this.backend.create.bind(this.backend);if(d.length<6)try{let u;d.length===5?u=d(e,n,r,i,c):u=d(e,n,r,i),u&&typeof u.then=="function"?u.then(m=>l(null,m)).catch(l):l(null,u)}catch(u){l(u)}else d(e,n,r,i,l,c)}!e||!e[0]||this.store.addResource(e[0],n,r,i)}}}const G8=()=>({debug:!1,initAsync:!0,ns:["translation"],defaultNS:["translation"],fallbackLng:["dev"],fallbackNS:!1,supportedLngs:!1,nonExplicitSupportedLngs:!1,load:"all",preload:!1,simplifyPluralSuffix:!0,keySeparator:".",nsSeparator:":",pluralSeparator:"_",contextSeparator:"_",partialBundledLanguages:!1,saveMissing:!1,updateMissing:!1,saveMissingTo:"fallback",saveMissingPlurals:!0,missingKeyHandler:!1,missingInterpolationHandler:!1,postProcess:!1,postProcessPassResolved:!1,returnNull:!1,returnEmptyString:!0,returnObjects:!1,joinArrays:!1,returnedObjectHandler:!1,parseMissingKeyHandler:!1,appendNamespaceToMissingKey:!1,appendNamespaceToCIMode:!1,overloadTranslationOptionHandler:t=>{let e={};if(typeof t[1]=="object"&&(e=t[1]),Hn(t[1])&&(e.defaultValue=t[1]),Hn(t[2])&&(e.tDescription=t[2]),typeof t[2]=="object"||typeof t[3]=="object"){const n=t[3]||t[2];Object.keys(n).forEach(r=>{e[r]=n[r]})}return e},interpolation:{escapeValue:!0,format:t=>t,prefix:"{{",suffix:"}}",formatSeparator:",",unescapePrefix:"-",nestingPrefix:"$t(",nestingSuffix:")",nestingOptionsSeparator:",",maxReplaces:1e3,skipOnVariables:!0},cacheInBuiltFormats:!0}),W8=t=>(Hn(t.ns)&&(t.ns=[t.ns]),Hn(t.fallbackLng)&&(t.fallbackLng=[t.fallbackLng]),Hn(t.fallbackNS)&&(t.fallbackNS=[t.fallbackNS]),t.supportedLngs?.indexOf?.("cimode")<0&&(t.supportedLngs=t.supportedLngs.concat(["cimode"])),typeof t.initImmediate=="boolean"&&(t.initAsync=t.initImmediate),t),z_=()=>{},cue=t=>{Object.getOwnPropertyNames(Object.getPrototypeOf(t)).forEach(n=>{typeof t[n]=="function"&&(t[n]=t[n].bind(t))})};class x0 extends EP{constructor(e={},n){if(super(),this.options=W8(e),this.services={},this.logger=Cd,this.modules={external:[]},cue(this),n&&!this.isInitialized&&!e.isClone){if(!this.options.initAsync)return this.init(e,n),this;setTimeout(()=>{this.init(e,n)},0)}}init(e={},n){this.isInitializing=!0,typeof e=="function"&&(n=e,e={}),e.defaultNS==null&&e.ns&&(Hn(e.ns)?e.defaultNS=e.ns:e.ns.indexOf("translation")<0&&(e.defaultNS=e.ns[0]));const r=G8();this.options={...r,...this.options,...W8(e)},this.options.interpolation={...r.interpolation,...this.options.interpolation},e.keySeparator!==void 0&&(this.options.userDefinedKeySeparator=e.keySeparator),e.nsSeparator!==void 0&&(this.options.userDefinedNsSeparator=e.nsSeparator);const i=d=>d?typeof d=="function"?new d:d:null;if(!this.options.isClone){this.modules.logger?Cd.init(i(this.modules.logger),this.options):Cd.init(null,this.options);let d;this.modules.formatter?d=this.modules.formatter:d=sue;const u=new B8(this.options);this.store=new z8(this.options.resources,this.options);const m=this.services;m.logger=Cd,m.resourceStore=this.store,m.languageUtils=u,m.pluralResolver=new nue(u,{prepend:this.options.pluralSeparator,simplifyPluralSuffix:this.options.simplifyPluralSuffix}),this.options.interpolation.format&&this.options.interpolation.format!==r.interpolation.format&&this.logger.deprecate("init: you are still using the legacy format function, please use the new approach: https://www.i18next.com/translation-function/formatting"),d&&(!this.options.interpolation.format||this.options.interpolation.format===r.interpolation.format)&&(m.formatter=i(d),m.formatter.init&&m.formatter.init(m,this.options),this.options.interpolation.format=m.formatter.format.bind(m.formatter)),m.interpolator=new rue(this.options),m.utils={hasLoadedNamespace:this.hasLoadedNamespace.bind(this)},m.backendConnector=new lue(i(this.modules.backend),m.resourceStore,m,this.options),m.backendConnector.on("*",(f,...x)=>{this.emit(f,...x)}),this.modules.languageDetector&&(m.languageDetector=i(this.modules.languageDetector),m.languageDetector.init&&m.languageDetector.init(m,this.options.detection,this.options)),this.modules.i18nFormat&&(m.i18nFormat=i(this.modules.i18nFormat),m.i18nFormat.init&&m.i18nFormat.init(this)),this.translator=new lN(this.services,this.options),this.translator.on("*",(f,...x)=>{this.emit(f,...x)}),this.modules.external.forEach(f=>{f.init&&f.init(this)})}if(this.format=this.options.interpolation.format,n||(n=z_),this.options.fallbackLng&&!this.services.languageDetector&&!this.options.lng){const d=this.services.languageUtils.getFallbackCodes(this.options.fallbackLng);d.length>0&&d[0]!=="dev"&&(this.options.lng=d[0])}!this.services.languageDetector&&!this.options.lng&&this.logger.warn("init: no languageDetector is used and no lng is defined"),["getResource","hasResourceBundle","getResourceBundle","getDataByLanguage"].forEach(d=>{this[d]=(...u)=>this.store[d](...u)}),["addResource","addResources","addResourceBundle","removeResourceBundle"].forEach(d=>{this[d]=(...u)=>(this.store[d](...u),this)});const l=wv(),c=()=>{const d=(u,m)=>{this.isInitializing=!1,this.isInitialized&&!this.initializedStoreOnce&&this.logger.warn("init: i18next is already initialized. You should call init just once!"),this.isInitialized=!0,this.options.isClone||this.logger.log("initialized",this.options),this.emit("initialized",this.options),l.resolve(m),n(u,m)};if(this.languages&&!this.isInitialized)return d(null,this.t.bind(this));this.changeLanguage(this.options.lng,d)};return this.options.resources||!this.options.initAsync?c():setTimeout(c,0),l}loadResources(e,n=z_){let r=n;const i=Hn(e)?e:this.language;if(typeof e=="function"&&(r=e),!this.options.resources||this.options.partialBundledLanguages){if(i?.toLowerCase()==="cimode"&&(!this.options.preload||this.options.preload.length===0))return r();const s=[],o=l=>{if(!l||l==="cimode")return;this.services.languageUtils.toResolveHierarchy(l).forEach(d=>{d!=="cimode"&&s.indexOf(d)<0&&s.push(d)})};i?o(i):this.services.languageUtils.getFallbackCodes(this.options.fallbackLng).forEach(c=>o(c)),this.options.preload?.forEach?.(l=>o(l)),this.services.backendConnector.load(s,this.options.ns,l=>{!l&&!this.resolvedLanguage&&this.language&&this.setResolvedLanguage(this.language),r(l)})}else r(null)}reloadResources(e,n,r){const i=wv();return typeof e=="function"&&(r=e,e=void 0),typeof n=="function"&&(r=n,n=void 0),e||(e=this.languages),n||(n=this.options.ns),r||(r=z_),this.services.backendConnector.reload(e,n,s=>{i.resolve(),r(s)}),i}use(e){if(!e)throw new Error("You are passing an undefined module! Please check the object you are passing to i18next.use()");if(!e.type)throw new Error("You are passing a wrong module! Please check the object you are passing to i18next.use()");return e.type==="backend"&&(this.modules.backend=e),(e.type==="logger"||e.log&&e.warn&&e.error)&&(this.modules.logger=e),e.type==="languageDetector"&&(this.modules.languageDetector=e),e.type==="i18nFormat"&&(this.modules.i18nFormat=e),e.type==="postProcessor"&&IY.addPostProcessor(e),e.type==="formatter"&&(this.modules.formatter=e),e.type==="3rdParty"&&this.modules.external.push(e),this}setResolvedLanguage(e){if(!(!e||!this.languages)&&!(["cimode","dev"].indexOf(e)>-1)){for(let n=0;n-1)&&this.store.hasLanguageSomeTranslations(r)){this.resolvedLanguage=r;break}}!this.resolvedLanguage&&this.languages.indexOf(e)<0&&this.store.hasLanguageSomeTranslations(e)&&(this.resolvedLanguage=e,this.languages.unshift(e))}}changeLanguage(e,n){this.isLanguageChangingTo=e;const r=wv();this.emit("languageChanging",e);const i=l=>{this.language=l,this.languages=this.services.languageUtils.toResolveHierarchy(l),this.resolvedLanguage=void 0,this.setResolvedLanguage(l)},s=(l,c)=>{c?this.isLanguageChangingTo===e&&(i(c),this.translator.changeLanguage(c),this.isLanguageChangingTo=void 0,this.emit("languageChanged",c),this.logger.log("languageChanged",c)):this.isLanguageChangingTo=void 0,r.resolve((...d)=>this.t(...d)),n&&n(l,(...d)=>this.t(...d))},o=l=>{!e&&!l&&this.services.languageDetector&&(l=[]);const c=Hn(l)?l:l&&l[0],d=this.store.hasLanguageSomeTranslations(c)?c:this.services.languageUtils.getBestMatchFromCodes(Hn(l)?[l]:l);d&&(this.language||i(d),this.translator.language||this.translator.changeLanguage(d),this.services.languageDetector?.cacheUserLanguage?.(d)),this.loadResources(d,u=>{s(u,d)})};return!e&&this.services.languageDetector&&!this.services.languageDetector.async?o(this.services.languageDetector.detect()):!e&&this.services.languageDetector&&this.services.languageDetector.async?this.services.languageDetector.detect.length===0?this.services.languageDetector.detect().then(o):this.services.languageDetector.detect(o):o(e),r}getFixedT(e,n,r){const i=(s,o,...l)=>{let c;typeof o!="object"?c=this.options.overloadTranslationOptionHandler([s,o].concat(l)):c={...o},c.lng=c.lng||i.lng,c.lngs=c.lngs||i.lngs,c.ns=c.ns||i.ns,c.keyPrefix!==""&&(c.keyPrefix=c.keyPrefix||r||i.keyPrefix);const d=this.options.keySeparator||".";let u;return c.keyPrefix&&Array.isArray(s)?u=s.map(m=>(typeof m=="function"&&(m=L3(m,{...this.options,...o})),`${c.keyPrefix}${d}${m}`)):(typeof s=="function"&&(s=L3(s,{...this.options,...o})),u=c.keyPrefix?`${c.keyPrefix}${d}${s}`:s),this.t(u,c)};return Hn(e)?i.lng=e:i.lngs=e,i.ns=n,i.keyPrefix=r,i}t(...e){return this.translator?.translate(...e)}exists(...e){return this.translator?.exists(...e)}setDefaultNamespace(e){this.options.defaultNS=e}hasLoadedNamespace(e,n={}){if(!this.isInitialized)return this.logger.warn("hasLoadedNamespace: i18next was not initialized",this.languages),!1;if(!this.languages||!this.languages.length)return this.logger.warn("hasLoadedNamespace: i18n.languages were undefined or empty",this.languages),!1;const r=n.lng||this.resolvedLanguage||this.languages[0],i=this.options?this.options.fallbackLng:!1,s=this.languages[this.languages.length-1];if(r.toLowerCase()==="cimode")return!0;const o=(l,c)=>{const d=this.services.backendConnector.state[`${l}|${c}`];return d===-1||d===0||d===2};if(n.precheck){const l=n.precheck(this,o);if(l!==void 0)return l}return!!(this.hasResourceBundle(r,e)||!this.services.backendConnector.backend||this.options.resources&&!this.options.partialBundledLanguages||o(r,e)&&(!i||o(s,e)))}loadNamespaces(e,n){const r=wv();return this.options.ns?(Hn(e)&&(e=[e]),e.forEach(i=>{this.options.ns.indexOf(i)<0&&this.options.ns.push(i)}),this.loadResources(i=>{r.resolve(),n&&n(i)}),r):(n&&n(),Promise.resolve())}loadLanguages(e,n){const r=wv();Hn(e)&&(e=[e]);const i=this.options.preload||[],s=e.filter(o=>i.indexOf(o)<0&&this.services.languageUtils.isSupportedCode(o));return s.length?(this.options.preload=i.concat(s),this.loadResources(o=>{r.resolve(),n&&n(o)}),r):(n&&n(),Promise.resolve())}dir(e){if(e||(e=this.resolvedLanguage||(this.languages?.length>0?this.languages[0]:this.language)),!e)return"rtl";try{const i=new Intl.Locale(e);if(i&&i.getTextInfo){const s=i.getTextInfo();if(s&&s.direction)return s.direction}}catch{}const n=["ar","shu","sqr","ssh","xaa","yhd","yud","aao","abh","abv","acm","acq","acw","acx","acy","adf","ads","aeb","aec","afb","ajp","apc","apd","arb","arq","ars","ary","arz","auz","avl","ayh","ayl","ayn","ayp","bbz","pga","he","iw","ps","pbt","pbu","pst","prp","prd","ug","ur","ydd","yds","yih","ji","yi","hbo","men","xmn","fa","jpr","peo","pes","prs","dv","sam","ckb"],r=this.services?.languageUtils||new B8(G8());return e.toLowerCase().indexOf("-latn")>1?"ltr":n.indexOf(r.getLanguagePartFromCode(e))>-1||e.toLowerCase().indexOf("-arab")>1?"rtl":"ltr"}static createInstance(e={},n){const r=new x0(e,n);return r.createInstance=x0.createInstance,r}cloneInstance(e={},n=z_){const r=e.forkResourceStore;r&&delete e.forkResourceStore;const i={...this.options,...e,isClone:!0},s=new x0(i);if((e.debug!==void 0||e.prefix!==void 0)&&(s.logger=s.logger.clone(e)),["store","services","language"].forEach(l=>{s[l]=this[l]}),s.services={...this.services},s.services.utils={hasLoadedNamespace:s.hasLoadedNamespace.bind(s)},r){const l=Object.keys(this.store.data).reduce((c,d)=>(c[d]={...this.store.data[d]},c[d]=Object.keys(c[d]).reduce((u,m)=>(u[m]={...c[d][m]},u),c[d]),c),{});s.store=new z8(l,i),s.services.resourceStore=s.store}return s.translator=new lN(s.services,i),s.translator.on("*",(l,...c)=>{s.emit(l,...c)}),s.init(i,n),s.translator.options=i,s.translator.backendConnector.services.utils={hasLoadedNamespace:s.hasLoadedNamespace.bind(s)},s}toJSON(){return{options:this.options,store:this.store,language:this.language,languages:this.languages,resolvedLanguage:this.resolvedLanguage}}}const uo=x0.createInstance();uo.createInstance;uo.dir;uo.init;uo.loadResources;uo.reloadResources;uo.use;uo.changeLanguage;uo.getFixedT;uo.t;uo.exists;uo.setDefaultNamespace;uo.hasLoadedNamespace;uo.loadNamespaces;uo.loadLanguages;const due=(t,e,n,r)=>{const i=[n,{code:e,...r||{}}];if(t?.services?.logger?.forward)return t.services.logger.forward(i,"warn","react-i18next::",!0);Xf(i[0])&&(i[0]=`react-i18next:: ${i[0]}`),t?.services?.logger?.warn?t.services.logger.warn(...i):console?.warn&&console.warn(...i)},K8={},UY=(t,e,n,r)=>{Xf(n)&&K8[n]||(Xf(n)&&(K8[n]=new Date),due(t,e,n,r))},BY=(t,e)=>()=>{if(t.isInitialized)e();else{const n=()=>{setTimeout(()=>{t.off("initialized",n)},0),e()};t.on("initialized",n)}},O3=(t,e,n)=>{t.loadNamespaces(e,BY(t,n))},X8=(t,e,n,r)=>{if(Xf(n)&&(n=[n]),t.options.preload&&t.options.preload.indexOf(e)>-1)return O3(t,n,r);n.forEach(i=>{t.options.ns.indexOf(i)<0&&t.options.ns.push(i)}),t.loadLanguages(e,BY(t,r))},uue=(t,e,n={})=>!e.languages||!e.languages.length?(UY(e,"NO_LANGUAGES","i18n.languages were undefined or empty",{languages:e.languages}),!0):e.hasLoadedNamespace(t,{lng:n.lng,precheck:(r,i)=>{if(n.bindI18n&&n.bindI18n.indexOf("languageChanging")>-1&&r.services.backendConnector.backend&&r.isLanguageChangingTo&&!i(r.isLanguageChangingTo,t))return!1}}),Xf=t=>typeof t=="string",mue=t=>typeof t=="object"&&t!==null,hue=/&(?:amp|#38|lt|#60|gt|#62|apos|#39|quot|#34|nbsp|#160|copy|#169|reg|#174|hellip|#8230|#x2F|#47);/g,pue={"&":"&","&":"&","<":"<","<":"<",">":">",">":">","'":"'","'":"'",""":'"',""":'"'," ":" "," ":" ","©":"©","©":"©","®":"®","®":"®","…":"…","…":"…","/":"/","/":"/"},fue=t=>pue[t],gue=t=>t.replace(hue,fue);let I3={bindI18n:"languageChanged",bindI18nStore:"",transEmptyNodeValue:"",transSupportBasicHtmlNodes:!0,transWrapTextNodes:"",transKeepBasicHtmlNodesFor:["br","strong","i","p"],useSuspense:!0,unescape:gue,transDefaultProps:void 0};const bue=(t={})=>{I3={...I3,...t}},xue=()=>I3;let HY;const yue=t=>{HY=t},vue=()=>HY,wue={type:"3rdParty",init(t){bue(t.options.react),yue(t)}},Sue=w.createContext();class _ue{constructor(){this.usedNamespaces={}}addUsedNamespaces(e){e.forEach(n=>{this.usedNamespaces[n]||(this.usedNamespaces[n]=!0)})}getUsedNamespaces(){return Object.keys(this.usedNamespaces)}}var bM={exports:{}},xM={};var Y8;function kue(){if(Y8)return xM;Y8=1;var t=_g();function e(m,p){return m===p&&(m!==0||1/m===1/p)||m!==m&&p!==p}var n=typeof Object.is=="function"?Object.is:e,r=t.useState,i=t.useEffect,s=t.useLayoutEffect,o=t.useDebugValue;function l(m,p){var f=p(),x=r({inst:{value:f,getSnapshot:p}}),v=x[0].inst,g=x[1];return s(function(){v.value=f,v.getSnapshot=p,c(v)&&g({inst:v})},[m,f,p]),i(function(){return c(v)&&g({inst:v}),m(function(){c(v)&&g({inst:v})})},[m]),o(f),f}function c(m){var p=m.getSnapshot;m=m.value;try{var f=p();return!n(m,f)}catch{return!0}}function d(m,p){return p()}var u=typeof window>"u"||typeof window.document>"u"||typeof window.document.createElement>"u"?d:l;return xM.useSyncExternalStore=t.useSyncExternalStore!==void 0?t.useSyncExternalStore:u,xM}var Q8;function qY(){return Q8||(Q8=1,bM.exports=kue()),bM.exports}var sO=qY();const Nue=(t,e)=>Xf(e)?e:mue(e)&&Xf(e.defaultValue)?e.defaultValue:Array.isArray(t)?t[t.length-1]:t,Cue={t:Nue,ready:!1},Pue=()=>()=>{},Rt=(t,e={})=>{const{i18n:n}=e,{i18n:r,defaultNS:i}=w.useContext(Sue)||{},s=n||r||vue();s&&!s.reportNamespaces&&(s.reportNamespaces=new _ue),s||UY(s,"NO_I18NEXT_INSTANCE","useTranslation: You will need to pass in an i18next instance by using initReactI18next");const o=w.useMemo(()=>({...xue(),...s?.options?.react,...e}),[s,e]),{useSuspense:l,keyPrefix:c}=o,d=i||s?.options?.defaultNS,u=Xf(d)?[d]:d||["translation"],m=w.useMemo(()=>u,u);s?.reportNamespaces?.addUsedNamespaces?.(m);const p=w.useRef(0),f=w.useCallback(k=>{if(!s)return Pue;const{bindI18n:D,bindI18nStore:H}=o,z=()=>{p.current+=1,k()};return D&&s.on(D,z),H&&s.store.on(H,z),()=>{D&&D.split(" ").forEach(X=>s.off(X,z)),H&&H.split(" ").forEach(X=>s.store.off(X,z))}},[s,o]),x=w.useRef(),v=w.useCallback(()=>{if(!s)return Cue;const k=!!(s.isInitialized||s.initializedStoreOnce)&&m.every(te=>uue(te,s,o)),D=e.lng||s.language,H=p.current,z=x.current;if(z&&z.ready===k&&z.lng===D&&z.keyPrefix===c&&z.revision===H)return z;const L={t:s.getFixedT(D,o.nsMode==="fallback"?m:m[0],c),ready:k,lng:D,keyPrefix:c,revision:H};return x.current=L,L},[s,m,c,o,e.lng]),[g,b]=w.useState(0),{t:_,ready:C}=sO.useSyncExternalStore(f,v,v);w.useEffect(()=>{if(s&&!C&&!l){const k=()=>b(D=>D+1);e.lng?X8(s,e.lng,m,k):O3(s,m,k)}},[s,e.lng,m,C,l,g]);const P=s||{},N=w.useRef(null),A=w.useRef(),T=k=>{const D=Object.getOwnPropertyDescriptors(k);D.__original&&delete D.__original;const H=Object.create(Object.getPrototypeOf(k),D);if(!Object.prototype.hasOwnProperty.call(H,"__original"))try{Object.defineProperty(H,"__original",{value:k,writable:!1,enumerable:!1,configurable:!1})}catch{}return H},F=w.useMemo(()=>{const k=P,D=k?.language;let H=k;k&&(N.current&&N.current.__original===k?A.current!==D?(H=T(k),N.current=H,A.current=D):H=N.current:(H=T(k),N.current=H,A.current=D));const z=[_,H,C];return z.t=_,z.i18n=H,z.ready=C,z},[_,P,C,P.resolvedLanguage,P.language,P.languages]);if(s&&l&&!C)throw new Promise(k=>{const D=()=>k();e.lng?X8(s,e.lng,m,D):O3(s,m,D)});return F},{slice:Tue,forEach:Aue}=[];function jue(t){return Aue.call(Tue.call(arguments,1),e=>{if(e)for(const n in e)t[n]===void 0&&(t[n]=e[n])}),t}function Mue(t){return typeof t!="string"?!1:[/<\s*script.*?>/i,/<\s*\/\s*script\s*>/i,/<\s*img.*?on\w+\s*=/i,/<\s*\w+\s*on\w+\s*=.*?>/i,/javascript\s*:/i,/vbscript\s*:/i,/expression\s*\(/i,/eval\s*\(/i,/alert\s*\(/i,/document\.cookie/i,/document\.write\s*\(/i,/window\.location/i,/innerHTML/i].some(n=>n.test(t))}const Z8=/^[\u0009\u0020-\u007e\u0080-\u00ff]+$/,Eue=function(t,e){const r=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{path:"/"},i=encodeURIComponent(e);let s=`${t}=${i}`;if(r.maxAge>0){const o=r.maxAge-0;if(Number.isNaN(o))throw new Error("maxAge should be a Number");s+=`; Max-Age=${Math.floor(o)}`}if(r.domain){if(!Z8.test(r.domain))throw new TypeError("option domain is invalid");s+=`; Domain=${r.domain}`}if(r.path){if(!Z8.test(r.path))throw new TypeError("option path is invalid");s+=`; Path=${r.path}`}if(r.expires){if(typeof r.expires.toUTCString!="function")throw new TypeError("option expires is invalid");s+=`; Expires=${r.expires.toUTCString()}`}if(r.httpOnly&&(s+="; HttpOnly"),r.secure&&(s+="; Secure"),r.sameSite)switch(typeof r.sameSite=="string"?r.sameSite.toLowerCase():r.sameSite){case!0:s+="; SameSite=Strict";break;case"lax":s+="; SameSite=Lax";break;case"strict":s+="; SameSite=Strict";break;case"none":s+="; SameSite=None";break;default:throw new TypeError("option sameSite is invalid")}return r.partitioned&&(s+="; Partitioned"),s},J8={create(t,e,n,r){let i=arguments.length>4&&arguments[4]!==void 0?arguments[4]:{path:"/",sameSite:"strict"};n&&(i.expires=new Date,i.expires.setTime(i.expires.getTime()+n*60*1e3)),r&&(i.domain=r),document.cookie=Eue(t,e,i)},read(t){const e=`${t}=`,n=document.cookie.split(";");for(let r=0;r-1&&(r=window.location.hash.substring(window.location.hash.indexOf("?")));const s=r.substring(1).split("&");for(let o=0;o0&&s[o].substring(0,l)===e&&(n=s[o].substring(l+1))}}return n}},Rue={name:"hash",lookup(t){let{lookupHash:e,lookupFromHashIndex:n}=t,r;if(typeof window<"u"){const{hash:i}=window.location;if(i&&i.length>2){const s=i.substring(1);if(e){const o=s.split("&");for(let l=0;l0&&o[l].substring(0,c)===e&&(r=o[l].substring(c+1))}}if(r)return r;if(!r&&n>-1){const o=i.match(/\/([a-zA-Z-]*)/g);return Array.isArray(o)?o[typeof n=="number"?n:0]?.replace("/",""):void 0}}}return r}};let mb=null;const eH=()=>{if(mb!==null)return mb;try{if(mb=typeof window<"u"&&window.localStorage!==null,!mb)return!1;const t="i18next.translate.boo";window.localStorage.setItem(t,"foo"),window.localStorage.removeItem(t)}catch{mb=!1}return mb};var Lue={name:"localStorage",lookup(t){let{lookupLocalStorage:e}=t;if(e&&eH())return window.localStorage.getItem(e)||void 0},cacheUserLanguage(t,e){let{lookupLocalStorage:n}=e;n&&eH()&&window.localStorage.setItem(n,t)}};let hb=null;const tH=()=>{if(hb!==null)return hb;try{if(hb=typeof window<"u"&&window.sessionStorage!==null,!hb)return!1;const t="i18next.translate.boo";window.sessionStorage.setItem(t,"foo"),window.sessionStorage.removeItem(t)}catch{hb=!1}return hb};var Oue={name:"sessionStorage",lookup(t){let{lookupSessionStorage:e}=t;if(e&&tH())return window.sessionStorage.getItem(e)||void 0},cacheUserLanguage(t,e){let{lookupSessionStorage:n}=e;n&&tH()&&window.sessionStorage.setItem(n,t)}},Iue={name:"navigator",lookup(t){const e=[];if(typeof navigator<"u"){const{languages:n,userLanguage:r,language:i}=navigator;if(n)for(let s=0;s0?e:void 0}},zue={name:"htmlTag",lookup(t){let{htmlTag:e}=t,n;const r=e||(typeof document<"u"?document.documentElement:null);return r&&typeof r.getAttribute=="function"&&(n=r.getAttribute("lang")),n}},Uue={name:"path",lookup(t){let{lookupFromPathIndex:e}=t;if(typeof window>"u")return;const n=window.location.pathname.match(/\/([a-zA-Z-]*)/g);return Array.isArray(n)?n[typeof e=="number"?e:0]?.replace("/",""):void 0}},Bue={name:"subdomain",lookup(t){let{lookupFromSubdomainIndex:e}=t;const n=typeof e=="number"?e+1:1,r=typeof window<"u"&&window.location?.hostname?.match(/^(\w{2,5})\.(([a-z0-9-]{1,63}\.[a-z]{2,6})|localhost)/i);if(r)return r[n]}};let $Y=!1;try{document.cookie,$Y=!0}catch{}const VY=["querystring","cookie","localStorage","sessionStorage","navigator","htmlTag"];$Y||VY.splice(1,1);const Hue=()=>({order:VY,lookupQuerystring:"lng",lookupCookie:"i18next",lookupLocalStorage:"i18nextLng",lookupSessionStorage:"i18nextLng",caches:["localStorage"],excludeCacheFor:["cimode"],convertDetectedLanguage:t=>t});class GY{constructor(e){let n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{};this.type="languageDetector",this.detectors={},this.init(e,n)}init(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{languageUtils:{}},n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{},r=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{};this.services=e,this.options=jue(n,this.options||{},Hue()),typeof this.options.convertDetectedLanguage=="string"&&this.options.convertDetectedLanguage.indexOf("15897")>-1&&(this.options.convertDetectedLanguage=i=>i.replace("-","_")),this.options.lookupFromUrlIndex&&(this.options.lookupFromPathIndex=this.options.lookupFromUrlIndex),this.i18nOptions=r,this.addDetector(Due),this.addDetector(Fue),this.addDetector(Lue),this.addDetector(Oue),this.addDetector(Iue),this.addDetector(zue),this.addDetector(Uue),this.addDetector(Bue),this.addDetector(Rue)}addDetector(e){return this.detectors[e.name]=e,this}detect(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.order,n=[];return e.forEach(r=>{if(this.detectors[r]){let i=this.detectors[r].lookup(this.options);i&&typeof i=="string"&&(i=[i]),i&&(n=n.concat(i))}}),n=n.filter(r=>r!=null&&!Mue(r)).map(r=>this.options.convertDetectedLanguage(r)),this.services&&this.services.languageUtils&&this.services.languageUtils.getBestMatchFromCodes?n:n.length>0?n[0]:null}cacheUserLanguage(e){let n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:this.options.caches;n&&(this.options.excludeCacheFor&&this.options.excludeCacheFor.indexOf(e)>-1||n.forEach(r=>{this.detectors[r]&&this.detectors[r].cacheUserLanguage(e,this.options)}))}}GY.type="languageDetector";const que={nav:{printers:"Printers",archives:"Archives",queue:"Queue",stats:"Statistics",profiles:"Profiles",maintenance:"Maintenance",projects:"Projects",inventory:"Filament",files:"File Manager",notifications:"Notifications",settings:"Settings",system:"System",collapseSidebar:"Collapse sidebar",expandSidebar:"Expand sidebar",update:"Update",updateAvailable:"Update available: v{{version}}",updateAvailableBanner:"Version {{version}} is available!",viewUpdate:"View update",viewOnGithub:"View on GitHub",keyboardShortcuts:"Keyboard shortcuts (?)",switchToLight:"Switch to light mode",switchToDark:"Switch to dark mode",smartSwitches:"Smart Switches",logout:"Logout"},common:{save:"Save",saving:"Saving...",cancel:"Cancel",delete:"Delete",edit:"Edit",add:"Add",close:"Close",confirm:"Confirm",loading:"Loading...",error:"Error",success:"Success",warning:"Warning",enabled:"Enabled",disabled:"Disabled",yes:"Yes",no:"No",on:"On",off:"Off",all:"All",none:"None",search:"Search",filter:"Filter",sort:"Sort",refresh:"Refresh",download:"Download",upload:"Upload",uploading:"Uploading...",uploadFailed:"Upload failed",actions:"Actions",status:"Status",name:"Name",description:"Description",date:"Date",time:"Time",hours:"hours",minutes:"minutes",seconds:"seconds",days:"days",enable:"Enable",disable:"Disable",permissions:"Permissions",noPrinters:"No printers configured",noData:"No data available",linkNotFound:"Link not found",required:"Required",optional:"Optional",dismiss:"Dismiss",apply:"Apply",reset:"Reset",export:"Export",import:"Import",clear:"Clear",selectAll:"Select All",deselectAll:"Deselect All",noChange:"— No change —",unchanged:"Unchanged",unassigned:"Unassigned",unknown:"Unknown",unknownError:"Unknown error",today:"Today",tomorrow:"Tomorrow",asap:"ASAP",overdue:"Overdue",now:"Now",collapse:"Collapse",expand:"Expand",viewArchive:"View archive",viewInFileManager:"View in File Manager",addedBy:"Added by {{username}}",prints:"prints",more:"+{{count}} more",ascending:"Ascending",descending:"Descending",back:"Back",copy:"Copy",copied:"Copied!",printer:"Printer",remove:"Remove",type:"Type",print:"Print",rename:"Rename",move:"Move",create:"Create",duplicate:"Duplicate",left:"Left",right:"Right"},printers:{title:"Printers",addPrinter:"Add Printer",editPrinter:"Edit Printer",deletePrinter:"Delete Printer",printerName:"Printer Name",serialNumber:"Serial Number",ipAddress:"IP Address / Hostname",accessCode:"Access Code",model:"Model",nozzleCount:"Nozzle Count",autoArchive:"Auto Archive",status:{available:"Available",idle:"Idle",printing:"Printing",paused:"Paused",offline:"Offline",problem:"Problem",error:"Error",finished:"Finished",unknown:"Unknown"},temperatures:{nozzle:"Nozzle",bed:"Bed",chamber:"Chamber"},progress:"{{percent}}% complete",timeRemaining:"{{time}} remaining",deleteConfirm:'Are you sure you want to delete "{{name}}"?',maintenanceOk:"Maintenance OK",maintenanceWarning:"{{count}} warning",maintenanceWarning_plural:"{{count}} warnings",maintenanceDue:"{{count}} due",maintenanceDue_plural:"{{count}} due",sort:{name:"Name",status:"Status",model:"Model",location:"Location",ascending:"Sort ascending",descending:"Sort descending"},cardSize:{small:"Small cards",medium:"Medium cards",large:"Large cards",extraLarge:"Extra large cards"},hideOffline:"Hide offline",nextAvailable:"Next available",powerOn:"Power On",offlinePrintersWithPlugs:"Offline printers with smart plugs",noPrintersConfigured:"No printers configured yet",search:"Search printers...",noSearchResults:"No printers match your search or filters",filter:{allStatuses:"All statuses",allLocations:"All locations"},readyToPrint:"Ready to print",external:"External",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Delete print archives",noLabel:"No label",printPreview:"Print preview",width:"Width",height:"Height",noObjectsFound:"No objects found",objectsLoadedOnPrintStart:"Objects are loaded when a print starts",willBeSkipped:"Will be skipped",name:"Name",serialCannotBeChanged:"Serial number cannot be changed",locationHelp:"Used to group printers and filter queue jobs",wifiSignal:{veryWeak:"Very weak",weak:"Weak",fair:"Fair",good:"Good",excellent:"Excellent"},maintenanceUpToDate:"All maintenance up to date - Click to view",chamberLightOn:"Turn on chamber light",chamberLightOff:"Turn off chamber light",files:"Files",browseFiles:"Browse printer files",autoOffAfterPrint:"Auto power-off after print",autoOffExecuted:"Auto-off was executed - turn printer on to reset",hmsErrors:"HMS Errors",viewHmsErrors:"View {{count}} HMS error(s)",resume:"Resume",pause:"Pause",stop:"Stop",camera:"Camera",skipObject:"Skip Object",reconnect:"Reconnect",forceRefresh:"Force Refresh",forceRefreshSuccess:"Refresh requested",mqttDebug:"MQTT Debug",printerInformation:"Printer Information",copyToClipboard:"Copy",copied:"Copied!",state:"State",wifiSignalLabel:"WiFi Signal",developerMode:"Developer Mode",enabled:"Enabled",disabled:"Disabled",addedOn:"Added",sdCard:"SD Card",inserted:"Inserted",notInserted:"Not inserted",totalPrintHours:"Print Hours",activeNozzle:"Active: {{nozzle}} nozzle",nozzleRack:"Nozzle Rack",nozzleDocked:"Docked",nozzleMounted:"Mounted",nozzleActive:"Active",nozzleIdle:"Idle",nozzleDiameter:"Diameter",nozzleType:"Type",nozzleStatus:"Status",nozzleFilament:"Filament",nozzleWear:"Wear",nozzleMaxTemp:"Max Temp",nozzleSerial:"Serial",nozzleHardenedSteel:"Hardened Steel",nozzleStainlessSteel:"Stainless Steel",nozzleTungstenCarbide:"Tungsten Carbide",nozzleFlow:"Flow",nozzleHighFlow:"High Flow",nozzleStandardFlow:"Standard",firmwareUpdate:"Firmware Update",firmwareInstructions:"On the printer's touchscreen, go to",firmwareNav:"Navigate to",settings:"Settings",firmware:"Firmware",discoverPrinters:"Discover Printers",searching:"Searching...",manualEntry:"Manual Entry",addFromCloud:"Add from Cloud",toast:{printerDeleted:"Printer deleted",missingSpoolAssignment:"Print started on {{printer}}. Missing spool assignment for: {{slots}}",printerAdded:"Printer added",printerUpdated:"Printer updated",failedToDelete:"Failed to delete printer",failedToAdd:"Failed to add printer",failedToUpdate:"Failed to update printer",commandSent:"Command sent",failedToSendCommand:"Failed to send command",turnedOn:"{{name}} turned on",failedToPowerOn:"Failed to power on {{name}}",scriptTriggered:"Script triggered",printStopped:"Print stopped",printPaused:"Print paused",printResumed:"Print resumed",referenceDeleted:"Reference deleted",detectionAreaSaved:"Detection area saved",failedToRunScript:"Failed to run script",failedToStopPrint:"Failed to stop print",failedToPausePrint:"Failed to pause print",failedToResumePrint:"Failed to resume print",failedToControlChamberLight:"Failed to control chamber light",failedToSetSpeed:"Failed to set print speed",failedToUpdateSetting:"Failed to update setting",failedToSkipObjects:"Failed to skip objects",failedToRereadRfid:"Failed to re-read RFID",failedToCheckPlate:"Failed to check plate",failedToUpdateLabel:"Failed to update label",failedToDeleteReference:"Failed to delete reference",failedToSaveDetectionArea:"Failed to save detection area",plateCheckEnabled:"Plate check enabled",plateCheckDisabled:"Plate check disabled",calibrationSaved:"Calibration saved!",calibrationFailed:"Calibration failed",rfidRereadInitiated:"RFID re-read initiated"},connection:{connected:"Connected",offline:"Offline"},queue:{inQueue:"{{count}} print in queue",inQueue_plural:"{{count}} prints in queue"},controls:"Controls",rfid:{reread:"Re-read RFID"},bedJog:{title:"Move build plate",bed:"Bed",step:"Step (mm)",up:"Move plate up",down:"Move plate down",disabledWhilePrinting:"Disabled while printing",notHomedTitle:"Printer is not homed",notHomedMessage:"The Z axis has not been homed since the last print. Home Z first for safe positioning, or move anyway — soft endstops will be bypassed.",homeZ:"Home Z",moveAnyway:"Move anyway",homingStarted:"Homing Z axis…"},permission:{noAdd:"You do not have permission to add printers",noEdit:"You do not have permission to edit printers",noDelete:"You do not have permission to delete printers",noControl:"You do not have permission to control printers",noFiles:"You do not have permission to access printer files",noAmsRfid:"You do not have permission to re-read AMS RFID",noSmartPlugControl:"You do not have permission to control smart plugs",noCamera:"You do not have permission to view cameras"},modal:{addTitle:"Add Printer",editTitle:"Edit Printer",myPrinter:"My Printer",selectModel:"Select model...",locationGroup:"Location / Group (optional)",locationPlaceholder:"e.g., Workshop, Office, Basement",autoArchiveLabel:"Auto-archive completed prints",fromPrinterSettings:"From printer settings",modelOptional:"Model (optional)",saveChanges:"Save Changes"},skipObjects:{tooltip:"Skip objects",onlyWhilePrinting:"Skip objects (only while printing)",requiresMultiple:"Skip objects (requires 2+ objects)",title:"Skip Objects",matchIdsInfo:"Match IDs with your printer display",printerShowsIds:"The printer screen shows object IDs on the build plate",skipSelected:"Skip Selected",skipping:"Skipping...",noObjectsSelected:"No objects selected",selectObjectsToSkip:"Select objects you want to skip from the current print",skipped:"skipped",objectsSkipped:"Objects skipped",activeCount:"{{count}} active",waitForLayer:"Wait for layer 2+ to skip objects (currently layer {{layer}})",skip:"Skip",confirmTitle:"Skip Object?",confirmMessage:'Are you sure you want to skip "{{name}}"? This cannot be undone.'},confirm:{deleteTitle:"Delete Printer",deleteMessage:'Are you sure you want to delete "{{name}}"? This will remove all connection settings.',deleteArchivesNote:"All print history for this printer will be permanently deleted.",keepArchivesNote:"Print history will be kept but no longer associated with this printer.",stopTitle:"Stop Print",stopMessage:'Are you sure you want to stop the current print on "{{name}}"? This will cancel the print job.',stopButton:"Stop Print",pauseTitle:"Pause Print",pauseMessage:'Are you sure you want to pause the current print on "{{name}}"?',pauseButton:"Pause Print",resumeTitle:"Resume Print",resumeMessage:'Are you sure you want to resume the print on "{{name}}"?',resumeButton:"Resume Print",powerOnTitle:"Power On Printer",powerOnMessage:'Are you sure you want to turn ON the power for "{{name}}"?',powerOnButton:"Power On",powerOffTitle:"Power Off Printer",powerOffMessage:'Are you sure you want to turn OFF the power for "{{name}}"?',powerOffWarning:'WARNING: "{{name}}" is currently printing! Are you sure you want to turn OFF the power? This will interrupt the print and may damage the printer.',powerOffButton:"Power Off"},bulk:{select:"Select",selectAll:"Select All",selectByLocation:"Select by Location",selected:"{{count}} selected",actions:{stop:"Stop",pause:"Pause",resume:"Resume",clearPlate:"Clear Bed",clearHMS:"Clear Notifications"},confirm:{stopTitle:"Stop {{count}} Prints",stopMessage:"This will cancel active prints on {{count}} printer(s). This action cannot be undone.",stopButton:"Stop All",pauseTitle:"Pause {{count}} Prints",pauseMessage:"This will pause active prints on {{count}} printer(s).",pauseButton:"Pause All",clearPlateTitle:"Clear {{count}} Print Beds",clearPlateMessage:"This will clear the print bed on {{count}} printer(s) and may trigger queued jobs.",clearPlateButton:"Clear All"},success:"{{action}} completed on {{count}} printer(s)",partial:"{{succeeded}} succeeded, {{failed}} failed",noneApplicable:"No selected printers are in the right state for this action",selectByState:"Select by State"},discovery:{title:"Discover Printers",searching:"Searching...",scanning:"Scanning...",scanProgress:"Scanning... {{scanned}}/{{total}}",foundPrinters:"Found {{count}} printer(s)",noPrintersFound:"No printers found",noPrintersFoundSubnet:"No printers found in the specified subnet.",noPrintersFoundNetwork:"No printers found on the network.",allConfigured:"All discovered printers are already configured.",alreadyAdded:"Already added",select:"Select",manualEntry:"Manual Entry",addFromCloud:"Add from Cloud",subnetToScan:"Subnet to scan",dockerNote:"Docker detected. Enter your printer's subnet in CIDR notation. Requires network_mode: host in docker-compose.yml.",scanSubnet:"Scan Subnet for Printers",discoverNetwork:"Discover Printers on Network",scanningSubnet:"Scanning subnet for Bambu printers...",scanningNetwork:"Scanning network...",serialRequired:"Serial required",unknown:"Unknown",failedToStart:"Failed to start discovery"},drying:{start:"Start Drying",stop:"Stop Drying",temperature:"Temperature",duration:"Duration",hours:"hours",timeRemaining:"{{time}} left",active:"Drying",notSupported:"Drying not supported",powerRequired:"Connect AMS power adapter to enable drying",startingDrying:"Starting drying...",stoppingDrying:"Stopping drying...",rotateTray:"Rotate spool during drying"},filaments:"Filaments",openCameraOverlay:"Open camera overlay",openCameraWindow:"Open camera in new window",firmwareUpdateAvailable:"Firmware update available: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Up to date",firmwareUpdateButton:"Update",plateDetection:{noPermission:"You do not have permission to update printers",enabledClick:"Plate check enabled - Click to disable",disabledClick:"Plate check disabled - Click to enable",manageCalibration:"Manage plate detection calibration",calibrationRequired:"Calibration Required",calibrationInstructions:"Please ensure the build plate is completely empty, then click Calibrate.",calibrationDescription:"Calibration captures a reference image of the empty plate. Future checks will compare against this reference to detect objects.",calibrationTip:"Tip: You can store up to 5 calibrations for different plates. The system automatically uses the best match when checking.",plateEmpty:"Plate appears empty",objectsDetected:"Objects detected on plate",confidence:"Confidence",difference:"Difference",analysisPreview:"Analysis preview:",analysisLegend:"Green box = detection area, Red overlay = differences from calibration",savedReferences:"Saved References ({{count}}/{{max}})",deleteReference:"Delete reference",labelPlaceholder:"Label...",clickToEdit:"{{label}} - Click to edit",clickToAddLabel:"Click to add label"},speed:{title:"Print Speed",silent:"Silent (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Airduct Mode",cooling:"Cooling",heating:"Heating"},noSdCard:"No SD",door:{open:"Open",closed:"Closed"},fans:{partCooling:"Part Cooling Fan",auxiliary:"Auxiliary Fan",chamber:"Chamber Fan"},clickToViewHmsErrors:"Click to view HMS errors",estimatedCompletion:"Estimated completion time",plateNumber:"Plate {{number}}",slotOptions:"Slot options",amsPopup:{friendlyName:"AMS Name",friendlyNamePlaceholder:"e.g. AMS Friendly Name",serialNumber:"Serial Number",firmwareVersion:"Firmware",save:"Save",clear:"Clear",noEditPermission:"You do not have permission to rename AMS units"},firmwareModal:{title:"Firmware Update",titleUpToDate:"Firmware Info",currentVersion:"Current:",latestVersion:"Latest:",releaseNotes:"Release Notes",checkingPrereqs:"Checking prerequisites...",sdCardReady:"SD card ready. Click below to upload firmware.",uploadedSuccess:"Firmware uploaded to SD card!",applyInstructions:"To apply the update on your printer:",step1:"On the printer's touchscreen, go to Settings",step2:"Navigate to Firmware",step3:"Select Update from SD card",step4:"The update will take 10-20 minutes",done:"Done",starting:"Starting...",uploadFirmware:"Upload Firmware",uploadFailed:"Failed to start upload: {{error}}",uploadedToast:"Firmware uploaded! Trigger update from printer screen.",availableVersions:"Available versions",usable:"Usable",unavailable:"Unavailable",installed:"Installed",newerBadge:"newer",olderBadge:"older",currentBadge:"current"},accessCodePlaceholder:"Leave empty to keep current",roi:{title:"Detection Area (ROI)",xStart:"X Start",yStart:"Y Start",width:"Width",height:"Height",instruction:"Adjust the detection area to focus on the build plate. The green box in the preview shows the current area."},developerModeWarning:"Developer LAN mode is not enabled on: {{names}}. Some features may not work.",howToEnable:"How to enable",incompatibleFile:"This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}",dropNotPrintable:"Only .gcode and .gcode.3mf files can be printed",dropToPrint:"Drop to print",cannotPrint:"Printer busy"},archives:{title:"Print Archives",searchPlaceholder:"Search archives...",filterByPrinter:"Filter by printer",filterByStatus:"Filter by status",sortBy:"Sort by",sortNewest:"Newest first",sortOldest:"Oldest first",sortName:"Name",sortDuration:"Duration",sortLargest:"Largest first",sortSmallest:"Smallest first",sortSize:"Size",noArchives:"No archives found",noArchivesSearch:"No archives match your search",originalPrintNotVisible:"Original print not visible - try clearing filters",noArchivesYet:"No archives yet",prints:"prints",pagination:{showing:"Showing",to:"to",of:"of",show:"Show",page:"Page",all:"All"},loadingArchives:"Loading archives...",releaseToUpload:"Release to upload",showAll:"Show all",showFavoritesOnly:"Show favorites only",gridView:"Grid view",listView:"List view",calendarView:"Calendar view",logView:"Print Log",manageTags:"Manage Tags",showFailedPrints:"Show failed prints",hideFailedPrints:"Hide failed prints",hideDuplicates:"Hide Duplicates",viewOriginalPrint:"Click to view original print (#{{id}})",printTime:"Print Time",filamentUsed:"Filament Used",cost:"Cost",reprint:"Reprint",preview:"Preview",deleteArchive:"Delete Archive",deleteConfirm:"Are you sure you want to delete this archive?",favorite:"Favorite",unfavorite:"Remove from favorites",viewDetails:"View Details",status:{completed:"Completed",failed:"Failed",stopped:"Stopped"},toast:{source3mfAttached:"Source 3MF attached: {{filename}}",failedUploadSource3mf:"Failed to upload source 3MF",source3mfRemoved:"Source 3MF removed",failedRemoveSource3mf:"Failed to remove source 3MF",f3dAttached:"F3D attached: {{filename}}",failedUploadF3d:"Failed to upload F3D",f3dRemoved:"F3D removed",failedRemoveF3d:"Failed to remove F3D",timelapseAttached:"Timelapse attached: {{filename}}",timelapseAlreadyAttached:"Timelapse already attached",noMatchingTimelapse:"No matching timelapse found",failedScanTimelapse:"Failed to scan for timelapse",failedAttachTimelapse:"Failed to attach timelapse",timelapseRemoved:"Timelapse removed",failedRemoveTimelapse:"Failed to remove timelapse",timelapseUploaded:"Timelapse uploaded: {{filename}}",failedUploadTimelapse:"Failed to upload timelapse",archiveDeleted:"Archive deleted",failedDeleteArchive:"Failed to delete archive",addedToFavorites:"Added to favorites",removedFromFavorites:"Removed from favorites",projectUpdated:"Project updated",failedUpdateProject:"Failed to update project",linkCopied:"Link copied to clipboard",failedCopyLink:"Failed to copy link",photoDeleted:"Photo deleted",failedDeletePhoto:"Failed to delete photo",failedDeleteArchives:"Failed to delete archives",failedUpdateFavorites:"Failed to update favorites",exportDownloaded:"Export downloaded",exportFailed:"Export failed"},menu:{print:"Print",schedule:"Schedule",openInBambuStudio:"Open in Slicer",slice:"Slice",externalLink:"External Link",viewOnMakerWorld:"View on MakerWorld",preview3d:"3D Preview",viewTimelapse:"View Timelapse",scanForTimelapse:"Scan for Timelapse",uploadTimelapse:"Upload Timelapse",removeTimelapse:"Remove Timelapse",downloadSource3mf:"Download Source 3MF",uploadSource3mf:"Upload Source 3MF",replaceSource3mf:"Replace Source 3MF",removeSource3mf:"Remove Source 3MF",uploadF3d:"Upload F3D",replaceF3d:"Replace F3D",downloadF3d:"Download F3D",removeF3d:"Remove F3D",download:"Download",copyDownloadLink:"Copy Download Link",qrCode:"QR Code",viewPhotos:"View Photos",viewPhotosCount:"View Photos ({{count}})",projectPage:"Project Page",addToFavorites:"Add to Favorites",removeFromFavorites:"Remove from Favorites",edit:"Edit",goToProject:"Go to Project: {{name}}",addToProject:"Add to Project",removeFromProject:"Remove from Project",loading:"Loading...",noProjectsAvailable:"No projects available",select:"Select",deselect:"Deselect",delete:"Delete"},permission:{noReprint:"You do not have permission to reprint this archive",noAddToQueue:"You do not have permission to add to queue",noUpdateArchives:"You do not have permission to update archives",noUploadFiles:"You do not have permission to upload files",noDownload:"You do not have permission to download archives",noCopyLink:"You do not have permission to copy download links",noDelete:"You do not have permission to delete this archive",noCreate:"You do not have permission to create archives"},card:{previousPlate:"Previous plate",nextPlate:"Next plate",plateNumber:"Plate {{index}}",moreOptions:"Right-click for more options",addToFavorites:"Add to favorites",removeFromFavorites:"Remove from favorites",cancelled:"cancelled",failed:"failed",duplicate:"duplicate",duplicateTitle:"This model has been printed before",openSource3mf:"Open source 3MF in Bambu Studio (right-click for more options)",downloadF3d:"Download Fusion 360 design file",viewTimelapse:"View timelapse",viewPhoto:"View 1 photo",viewPhotos:"View {{count}} photos",openFolder:"Open folder: {{name}}",slicedFile:"Sliced file - ready to print",sourceFile:"Source file only - no AMS mapping available",gcode:"GCODE",source:"SOURCE",project:"Project: {{name}}",estimated:"Estimated: {{time}}",actual:"Actual: {{time}}",accuracy:"Accuracy: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} layer",layers:"{{count}} layers",object:"{{count}} object",objects:"{{count}} objects",slicedFor:"Sliced for {{model}}",uploadedBy:"Uploaded By",noPermissionReprint:"You do not have permission to reprint",noFileForReprint:"No 3MF file available — the file could not be downloaded from the printer when the print was recorded",noPermissionEdit:"You do not have permission to edit archives",noPermissionDelete:"You do not have permission to delete archives",reprint:"Reprint",schedulePrint:"Schedule Print",schedule:"Schedule",openInBambuStudio:"Open in Slicer",openInBambuStudioToSlice:"Open in Slicer to slice",slice:"Slice",externalLink:"External Link",makerWorld:"MakerWorld: {{designer}}",viewProject:"View project",noExternalLink:"No external link",preview3d:"3D Preview",download:"Download",edit:"Edit",delete:"Delete"},modal:{deleteArchive:"Delete Archive",deleteConfirm:'Are you sure you want to delete "{{name}}"? This action cannot be undone.',deleteButton:"Delete",removeSource3mf:"Remove Source 3MF",removeSource3mfConfirm:'Are you sure you want to remove the source 3MF file from "{{name}}"? This will delete the original slicer project file.',removeButton:"Remove",removeF3d:"Remove F3D",removeF3dConfirm:'Are you sure you want to remove the Fusion 360 design file from "{{name}}"?',removeTimelapse:"Remove Timelapse",removeTimelapseConfirm:'Are you sure you want to remove the timelapse video from "{{name}}"?',timelapse:"{{name}} - Timelapse",selectTimelapse:"Select Timelapse",selectTimelapseDesc:"No auto-match found. Select the timelapse for this print:",deleteArchives:"Delete Archives",deleteArchivesConfirm:"Are you sure you want to delete {{count}} archive(s)? This action cannot be undone.",deleteCount:"Delete {{count}}"},page:{title:"Archives",printsCount:"{{filtered}} of {{total}} prints",dropFilesHere:"Drop .3mf files here",releaseToUpload:"Release to upload",only3mfSupported:"Only .3mf files are supported",close:"Close",selected:"{{count}} selected",selectAll:"Select All",tags:"Tags",project:"Project",favorite:"Favorite",delete:"Delete",toggledFavorites:"Toggled favorites for {{count}} archive(s)",failedUpdateFavorites:"Failed to update favorites",archivesDeleted:"{{count}} archive(s) deleted",failedDeleteArchives:"Failed to delete archives",photoDeleted:"Photo deleted",failedDeletePhoto:"Failed to delete photo"},list:{name:"Name",printer:"Printer",date:"Date",size:"Size",actions:"Actions",hasTimelapse:"Has timelapse"},log:{date:"Date",printName:"Print Name",printer:"Printer",user:"User",status:"Status",duration:"Duration",filament:"Filament",allPrinters:"All Printers",allUsers:"All Users",allStatuses:"All Statuses",cancelled:"Cancelled",skipped:"Skipped",dateFrom:"From",dateTo:"To",noEntries:"No print log entries found",showing:"Showing {{count}} of {{total}} entries",rowsPerPage:"Rows",page:"Page",prev:"Prev",next:"Next",clearLog:"Clear Log",clearLogTitle:"Clear Print Log",clearLogConfirm:"All print log entries will be permanently deleted. Archives and queue items are not affected. This action cannot be undone. Are you sure?",clearLogButton:"Clear All",cleared:"{{count}} log entries cleared",clearFailed:"Failed to clear print log"}},queue:{title:"Print Queue",subtitle:"Schedule and manage your print jobs",addToQueue:"Add to Queue",print:"Print",reprint:"Re-print",schedulePrint:"Schedule Print",editQueueItem:"Edit Queue Item",printToPrinters:"Print to {{count}} Printers",queueToPrinters:"Queue to {{count}} Printers",queueSelectedPlates:"Queue {{count}} Plates",selectAllPlates:"Select All {{count}} Plates",deselectAll:"Deselect All",printQueued:"Print queued",itemsQueued:"{{count}} items queued",sending:"Sending...",sendingProgress:"Sending {{current}}/{{total}}...",adding:"Adding...",addingProgress:"Adding {{current}}/{{total}}...",savingProgress:"Saving {{current}}/{{total}}...",clearQueue:"Clear Queue",clearHistory:"Clear History",emptyQueue:"Queue is empty",position:"Position",scheduledTime:"Scheduled Time",moveUp:"Move Up",moveDown:"Move Down",startNow:"Start Now",printingInProgress:"Printing in progress...",viewArchive:"View archive",viewInFileManager:"View in File Manager",itemCount:"{{count}} item",itemCount_plural:"{{count}} items",dragToReorder:"Drag to reorder (ASAP only)",reorderHint:"Position only affects ASAP items. Scheduled items run at their set time.",sjf:{label:"SJF",tooltip:"Shortest Job First — scheduler prioritizes shorter prints"},addedBy:"Added by {{name}}",nextInQueue:"Next in queue",clearPlate:"Clear Plate & Start Next",clearPlateSuccess:"Plate cleared — ready for next print",plateReady:"Plate cleared — ready for next print",plateNumber:"Plate {{index}}",quantity:"Quantity",quantityHint:"Creates {{count}} queue items",activeBatches:"Active Batches",batchProgress:"{{completed}} of {{total}} completed",cancelBatch:"Cancel Remaining",batchCancelled:"Remaining batch items cancelled",cancelBatchConfirmTitle:"Cancel Batch",cancelBatchConfirmMessage:"Cancel all remaining pending items in this batch?",batch:"Batch",sections:{currentlyPrinting:"Currently Printing",queued:"Queued",history:"History"},status:{pending:"Pending",waiting:"Waiting",printing:"Printing",paused:"Paused",completed:"Completed",failed:"Failed",skipped:"Skipped",cancelled:"Cancelled"},summary:{printing:"Printing",queued:"Queued",totalTime:"Total Queue Time",totalWeight:"Total Queue Weight",history:"History"},filter:{allPrinters:"All Printers",unassigned:"Unassigned",allStatus:"All Status",allLocations:"All Locations",any:"Any"},sort:{byPosition:"Sort by Position",byName:"Sort by Name",byPrinter:"Sort by Printer",bySchedule:"Sort by Schedule",byDate:"Sort by Date",ascendingOldest:"Ascending (oldest first)",descendingNewest:"Descending (newest first)"},badges:{staged:"Staged",requiresPrevious:"Requires previous success",autoPowerOff:"Auto power off",gcodeInjection:"G-code"},empty:{title:"No prints scheduled",description:'Schedule a print from the Archives page using the "Schedule" option in the context menu, or drag and drop files to get started.'},time:{asap:"ASAP",overdue:"Overdue",now:"Now",lessThanMinute:"In less than a minute",inMinutes:"In {{count}} min",inHours:"In {{count}} hours"},actions:{stopPrint:"Stop Print",startPrint:"Start Print",requeue:"Re-queue"},bulkEdit:{title:"Edit {{count}} Item",title_plural:"Edit {{count}} Items",description:"Only changed settings will be applied to selected items.",printer:"Printer",noChange:"— No change —",queueOptions:"Queue Options",staged:"Staged (manual start)",autoPowerOff:"Auto power off after print",requirePrevious:"Require previous success",printOptions:"Print Options",bedLevelling:"Bed levelling",flowCalibration:"Flow calibration",vibrationCalibration:"Vibration calibration",layerInspection:"First layer inspection",timelapse:"Timelapse",useAms:"Use AMS",applyChanges:"Apply Changes",selectAll:"Select All",deselectAll:"Deselect All",selected:"{{count}} selected",editSelected:"Edit Selected",cancelSelected:"Cancel Selected"},confirm:{cancelTitle:"Cancel Scheduled Print",cancelMessage:'Are you sure you want to cancel "{{name}}"?',stopTitle:"Stop Print",stopMessage:'Are you sure you want to stop the current print "{{name}}"? This will cancel the print job on the printer.',removeTitle:"Remove from History",removeMessage:'Are you sure you want to remove "{{name}}" from the queue history?',clearHistoryTitle:"Clear History",clearHistoryMessage:"Are you sure you want to remove all {{count}} item(s) from the history?",cancelButton:"Cancel Print",stopButton:"Stop Print",thisPrint:"this print",thisItem:"this item"},toast:{cancelled:"Queue item cancelled",cancelFailed:"Failed to cancel item",removed:"Queue item removed",removeFailed:"Failed to remove item",stopped:"Print stopped",stopFailed:"Failed to stop print",released:"Print released to queue",startFailed:"Failed to start print",reorderFailed:"Failed to reorder queue",historyCleared:"Cleared {{count}} history item(s)",clearHistoryFailed:"Failed to clear history",updateFailed:"Failed to update items",bulkCancelled:"Cancelled {{count}} item(s)",bulkCancelFailed:"Failed to cancel items"},timeline:{listView:"List",timelineView:"Timeline",unassigned:"Unassigned",noData:"No scheduled prints for this day",allDoneBy:"All prints estimated done by {{time}}",staged:"Staged",filterAll:"Show All",filterPrinting:"Printing",filterQueued:"Queued",time:{anyMoment:"any moment",minutesLeft:"{{minutes}}m left",hoursLeft:"{{hours}}h left",hoursMinutesLeft:"{{hours}}h {{minutes}}m left"},day:{previous:"Previous day",next:"Next day",today:"Today"}},permissions:{noStopPrint:"You do not have permission to stop prints",noStartPrint:"You do not have permission to start prints",noEdit:"You do not have permission to edit this queue item",noCancel:"You do not have permission to cancel this queue item",noRequeue:"You do not have permission to re-queue items",noRemove:"You do not have permission to remove this queue item",noClearHistory:"You do not have permission to clear all history",noEditItems:"You do not have permission to edit queue items",noCancelItems:"You do not have permission to cancel queue items"}},backgroundDispatch:{unknownFile:"Unknown file",unknownPrinter:"Unknown printer",startingPrints:"Starting prints",progressSummary:"{{complete}}/{{total}} complete • Dispatched: {{dispatched}} • Processing: {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Dismiss dispatch toast",cancelDispatchJob:"Cancel dispatch job",cancel:"Cancel",cancelling:"Cancelling…",status:{dispatched:"Dispatched",processing:"Processing",completed:"Completed",failed:"Failed",cancelled:"Cancelled"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Dispatch cancelled",cancelFailed:"Failed to cancel dispatch",completeWithFailures:"Background dispatch complete: {{completed}} succeeded, {{failed}} failed",completeSuccess:"Background dispatch complete: {{completed}} succeeded",printStartedRemaining:"{{completed}} print(s) started, {{remaining}} more sending..."}},stats:{title:"Dashboard",subtitle:"Drag widgets to rearrange. Click the eye icon to hide.",overview:"Overview",totalPrints:"Total Prints",successRate:"Success Rate",totalPrintTime:"Total Print Time",printTime:"Print Time",totalFilament:"Total Filament Used",filamentUsed:"Filament Used",filamentCost:"Filament Cost",totalCost:"Total Cost",energyUsed:"Energy Used",energyCost:"Energy Cost",energyWarmingUpTooltip:"Energy tracking is still collecting hourly snapshots. Date-range totals will become accurate once at least one snapshot exists before the selected range. Early values may undercount.",averagePrintTime:"Average Print Time",printsPerDay:"Prints per Day",byPrinter:"By Printer",printsByPrinter:"Prints by Printer",byMaterial:"By Material",byMonth:"By Month",last7Days:"Last 7 Days",last30Days:"Last 30 Days",last90Days:"Last 90 Days",allTime:"All Time",quickStats:"Quick Stats",printActivity:"Print Activity",filamentTypes:"Filament Types",filamentTrends:"Filament Trends",failureAnalysis:"Failure Analysis",timeAccuracy:"Time Accuracy",successful:"Successful:",failed:"Failed:",perfectEstimate:"100% = perfect estimate",noTimeAccuracyData:"No time accuracy data yet",noFilamentData:"No filament data available",noPrinterData:"No printer data available",noPrintData:"No print data available",noPrintDataLast30Days:"No print data in the last 30 days",failureReasons:"Failure Reasons",topFailureReasons:"Top Failure Reasons",failedPrintsCount:"{{failed}} / {{total}} prints failed",lastWeekRate:"Last week: {{rate}}%",resetLayout:"Reset Layout",recalculateCosts:"Recalculate Costs",recalculateCostsHint:"Recalculate all archive costs using current filament prices",exportStats:"Export Stats",exportAsCsv:"Export as CSV",exportAsExcel:"Export as Excel",hiddenCount:"{{count}} Hidden",exportDownloaded:"Export downloaded",exportFailed:"Export failed",layoutReset:"Layout reset",recalculatedCosts:"Recalculated costs for {{count}} archives",recalculateFailed:"Failed to recalculate costs",loadingStats:"Loading statistics...",noPermissionResetLayout:"You do not have permission to reset layout",noPermissionRecalculate:"You do not have permission to recalculate costs",noPrintDataInRange:"No print data in selected range",periodFilament:"Period Filament",periodCost:"Period Cost",avgPerPrint:"Avg per Print",usageOverTime:"Usage Over Time",filamentByWeight:"Weight",printDuration:"Print Duration",printerUtilization:"Printer Utilization",filamentSuccess:"Success by Material",printHabits:"Print Habits",printTimeOfDay:"Print Time of Day",colorDistribution:"Color Distribution",noColorData:"No color data available",records:"Records",longestPrint:"Longest Print",heaviestPrint:"Heaviest Print",mostExpensivePrint:"Most Expensive",busiestDay:"Busiest Day",successStreak:"Success Streak",streakPrint:"consecutive print",streakPrints:"{{count}} consecutive prints",printerStats:"Printer Stats",hours:"hours",avgPrints:"Avg. prints",noArchiveData:"No print data available",filamentByTime:"Time",avgWeight:"Avg. weight",avgTime:"Avg. time",filamentByPrints:"Prints",timeframe:{today:"Today","this-week":"This Week","this-month":"This Month","last-7":"Last 7 Days","last-30":"Last 30 Days","last-90":"Last 90 Days","this-year":"This Year","all-time":"All Time",custom:"Custom Range",from:"From",to:"To"},allUsers:"All Users",noUser:"No User (System)",filterByUser:"Filter by User"},maintenance:{title:"Maintenance",overview:"Overview",allOk:"All maintenance up to date",dueCount:"{{count}} item due",dueCount_plural:"{{count}} items due",warningCount:"{{count}} warning",warningCount_plural:"{{count}} warnings",totalPrintTime:"Total Print Time",nextMaintenance:"Next Maintenance",nothingDue:"Nothing due",tasks:"Tasks",lastPerformed:"Last performed",interval:"Interval",hoursRemaining:"{{hours}}h remaining",hoursOverdue:"{{hours}}h overdue",markDone:"Mark as Done",performMaintenance:"Perform Maintenance",history:"History",noHistory:"No maintenance history",editPrintHours:"Edit Print Hours",currentHours:"Current Hours",statusTab:"Status",settingsTab:"Settings",overdueCount:"{{count}} overdue",dueSoonCount:"{{count}} due soon",dueSoon:"Due soon",allGood:"All good",overdueBy:"Overdue by {{duration}}",dueIn:"Due in {{duration}}",timeLeft:"{{duration}} left",day:"1 day",days:"{{count}} days",week:"1 week",weeks:"{{count}} weeks",month:"1 month",months:"{{count}} months",year:"1 year",maintenanceTypes:"Maintenance Types",maintenanceTypesDescription:"System types and your custom maintenance tasks",addCustomType:"Add Custom Type",restoreDefaults:"Restore Default Tasks",intervalType:"Interval Type",intervalValue:"Interval ({{type}})",icon:"Icon",documentationLink:"Documentation Link (optional)",assignToPrinters:"Assign to Printers",selectAtLeastOnePrinter:"Select at least one printer",addType:"Add Type",custom:"Custom",printHours:"Print Hours",calendarDays:"Calendar Days",exampleName:"e.g., Replace HEPA Filter",viewDocumentation:"View documentation",timeBasedInterval:"Time-based interval",intervalOverrides:"Interval Overrides",intervalOverridesDescription:"Customize intervals for specific printers",assignedToPrinters:"Assigned to printers:",noPrintersAssigned:"No printers assigned",addPrinterShort:"Add:",printersAssignedClick:"{{count}} printer(s) assigned - click to manage",removeFromPrinter:"Remove from this printer",types:{lubricateCarbonRods:"Lubricate Carbon Rods",lubricateRails:"Lubricate Linear Rails",cleanNozzle:"Clean Nozzle/Hotend",checkBelts:"Check Belt Tension",cleanBuildPlate:"Clean Build Plate",checkExtruder:"Check Extruder Gears",checkCooling:"Check Cooling Fans",generalInspection:"General Inspection",cleanCarbonRods:"Clean Carbon Rods",lubricateSteelRods:"Lubricate Steel Rods",cleanSteelRods:"Clean Steel Rods",cleanLinearRails:"Clean Linear Rails",checkPtfeTube:"Check PTFE Tube",replaceHepaFilter:"Replace HEPA Filter",replaceCarbonFilter:"Replace Carbon Filter",lubricateLeftNozzleRail:"Lubricate Left Nozzle Rail"},maintenanceComplete:"Maintenance marked as complete",typeUpdated:"Maintenance type updated",typeDeleted:"Maintenance type deleted",defaultsRestored:"Restored {{count}} default task(s)",printHoursUpdated:"Print hours updated",printerAssigned:"Printer assigned",printerRemoved:"Printer removed",deleteTypeConfirm:'Delete "{{name}}"?',deleteSystemTypeTitle:"Delete default maintenance task?",deleteSystemTypeMessage:'Are you sure you want to delete the default maintenance task "{{name}}"?',noPermissionUpdate:"You do not have permission to update maintenance items",noPermissionPerform:"You do not have permission to perform maintenance",noPermissionEditTypes:"You do not have permission to edit maintenance types",noPermissionDeleteTypes:"You do not have permission to delete maintenance types",noPermissionEditHours:"You do not have permission to edit print hours",noPermissionRemovePrinter:"You do not have permission to remove printer assignments",noPermissionAssignPrinter:"You do not have permission to assign printers",noPermissionEditIntervals:"You do not have permission to edit intervals",configureSettings:"Configure maintenance types and intervals"},settings:{title:"Settings",general:"General",tabs:{general:"General",smartPlugs:"Smart Plugs",notifications:"Notifications",queue:"Workflow",filament:"Filament",network:"Network",apiKeys:"API Keys",virtualPrinter:"Virtual Printer",spoolbuddy:"SpoolBuddy",failureDetection:"Failure Detection",users:"Authentication",backup:"Backup",emailAuth:"Email Authentication",ldap:"LDAP",twoFa:"Two-Factor Auth",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy devices",infoBody:"SpoolBuddy kiosks register themselves automatically via heartbeat. Unregister a device here if it is no longer in use or if a stale duplicate was left behind by a daemon crash.",duplicatesTitle:"{{count}} devices registered",duplicatesBody:"Only the first registered device is used by the kiosk UI. If one of these is a stale duplicate from a crash, unregister it — an online device will re-register itself on its next heartbeat.",empty:"No SpoolBuddy devices registered yet.",online:"Online",offline:"Offline",unregister:"Unregister",unregisterSuccess:"Device unregistered",unregisterError:"Failed to unregister device",confirmTitle:"Unregister SpoolBuddy device?",confirmBody:'This will remove "{{hostname}}" ({{deviceId}}) from the database. If the device is online, it will re-register itself on its next heartbeat.',ipAddress:"IP address",firmware:"Firmware",lastSeen:"Last seen",daemonUptime:"Daemon uptime",systemUptime:"System uptime",never:"never",nfc:"NFC",scale:"Scale",cpuTemp:"CPU temp",memory:"Memory",disk:"Disk",update:"Update",updateConfirmTitle:"Update Spoolbuddy daemon?",updateConfirmBody:'Trigger a software update on "{{hostname}}"? The daemon will restart once the update is applied.',restartBrowser:"Restart Browser",restartBrowserConfirmTitle:"Restart kiosk browser?",restartBrowserConfirmBody:'Restart the kiosk browser on "{{hostname}}"? The display will blank briefly.',restartDaemon:"Restart Daemon",restartDaemonConfirmTitle:"Restart Spoolbuddy daemon?",restartDaemonConfirmBody:'Restart the Spoolbuddy daemon on "{{hostname}}"? The device will go offline for a few seconds.',reboot:"Reboot",rebootConfirmTitle:"Reboot device?",rebootConfirmBody:'Reboot "{{hostname}}"? The device will be offline for around a minute.',shutdown:"Shutdown",shutdownConfirmTitle:"Shutdown device?",shutdownConfirmBody:'Shutdown "{{hostname}}"? You will need physical access to power it back on.',commandConfirm:"Confirm",commandQueued:"Command queued",commandError:"Failed to send command"},ldap:{title:"LDAP Authentication",enabledDesc:"LDAP authentication is enabled",disabledDesc:"LDAP authentication is disabled",disabledHint:"Configure and save LDAP settings below, then enable.",enabled:"LDAP authentication enabled",disabled:"LDAP authentication disabled",feature1:"Users can login with LDAP credentials",feature2:"Local admin account remains as fallback",feature3:"LDAP groups are mapped to BamBuddy groups on login",serverConfig:"LDAP Server Configuration",serverUrl:"Server URL",serverUrlHint:"Use ldaps:// for SSL or ldap:// with StartTLS",security:"Security",securityHint:"StartTLS upgrades a plain connection to TLS. LDAPS uses TLS from the start.",bindDn:"Bind DN (Service Account)",bindPassword:"Bind Password",searchBase:"Search Base DN",userFilter:"User Search Filter",userFilterHint:"{username} is replaced with the login username. Use (uid={username}) for OpenLDAP.",autoProvision:"Auto-provision users",autoProvisionHint:"Automatically create a BamBuddy account on first LDAP login",defaultGroup:"Default group",defaultGroupNone:"— None (no fallback) —",defaultGroupHint:"Fallback group assigned when an LDAP user authenticates but is not listed in any mapped LDAP group. Leave empty to leave unmapped users without permissions.",groupMapping:"Group Mapping (JSON)",groupMappingHint:"Map LDAP group DNs to BamBuddy groups. Available groups: ",testConnection:"Test Connection",settingsSaved:"LDAP settings saved",errors:{serverRequired:"LDAP server URL is required",searchBaseRequired:"Search base DN is required",enableAuthFirst:"Enable authentication first",configureLdapFirst:"Save LDAP settings first"}},email:{smtpSettings:"SMTP Configuration",smtpHost:"SMTP Server",smtpPort:"SMTP Port",security:"Security",authentication:"Authentication",username:"Username",password:"Password",fromEmail:"From Email",fromName:"From Name",testConnection:"Test SMTP Connection",testRecipient:"Test Recipient Email",sendTest:"Send Test Email",sending:"Sending...",save:"Save Settings",saving:"Saving...",advancedAuth:"Advanced Authentication",advancedAuthEnabled:"Advanced Authentication is enabled",advancedAuthEnabledDesc:"Email-based user management features are active. New users will receive auto-generated passwords via email, and users can reset their passwords through the forgot password feature.",advancedAuthDisabled:"Advanced Authentication is disabled",advancedAuthDisabledDesc:"Enable advanced authentication to activate email-based features for user management.",enable:"Enable",disable:"Disable",feature1:"Passwords are auto-generated and emailed to new users",feature2:"Users can login with username or email",feature3:"Forgot password feature is available",feature4:"Admins can reset user passwords via email",errors:{requiredFields:"Please fill in all required fields",usernameRequired:"Username is required when authentication is enabled",enterTestEmail:"Please enter a test email address",smtpServerAndEmail:"Please fill in SMTP Server and From Email before testing",usernamePasswordRequired:"Username and Password are required when authentication is enabled",configureSmtpFirst:"Please configure and test SMTP settings first",enableAuthFirst:"Please enable authentication first to use email-based features."},success:{settingsSaved:"SMTP settings saved successfully"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"None (Port 25)"},authOptions:{enabled:"Enabled",disabled:"Disabled"}},appearance:"Appearance",notifications:"Notifications",smartPlugs:"Smart Plugs",spoolman:"Spoolman",updates:"Updates",language:"Language",languageDescription:"Select your preferred language",theme:"Theme",themeLight:"Light",themeDark:"Dark",themeSystem:"System",defaultView:"Default View",defaultViewDescription:"Page to show when opening the app",checkForUpdates:"Check for Updates",autoUpdate:"Auto Update",currentVersion:"Current Version",latestVersion:"Latest Version",upToDate:"You are up to date",updateAvailable:"Update available",notificationLanguage:"Notification Language",notificationLanguageDescription:"Language for push notifications",bedCooledThreshold:"Bed Cooled Threshold",bedCooledThresholdDescription:"Temperature below which the bed is considered cooled after a print",userNotificationsEnabled:"User Notifications",userNotificationsEnabledDescription:"Enable the user notifications menu and email notifications for print job events. Requires Advanced Authentication.",userNotificationsDisabledHint:"Enable Advanced Authentication to use user notifications.",notificationProviders:"Notification Providers",addProvider:"Add Provider",editProvider:"Edit Provider",providerType:"Provider Type",testNotification:"Test Notification",testSuccess:"Test notification sent successfully",testFailed:"Failed to send test notification",quietHours:"Quiet Hours",quietHoursDescription:"Do not disturb during these hours",quietHoursStart:"Start",quietHoursEnd:"End",events:{title:"Notification Events",printStart:"Print Started",printComplete:"Print Completed",printFailed:"Print Failed",printStopped:"Print Stopped",printProgress:"Progress Milestones",printProgressDescription:"Notify at 25%, 50%, 75%",printerOffline:"Printer Offline",printerError:"Printer Error",filamentLow:"Low Filament",maintenanceDue:"Maintenance Due",maintenanceDueDescription:"Notify when maintenance is needed"},smartPlug:{title:"Smart Plugs",add:"Add Smart Plug",edit:"Edit Smart Plug",name:"Name",ipAddress:"IP Address",linkedPrinter:"Linked Printer",autoOn:"Auto Power On",autoOnDescription:"Turn on when print starts",autoOff:"Auto Power Off",autoOffDescription:"Turn off after print completes",offDelay:"Off Delay",offDelayMinutes:"Minutes after print",offDelayTemp:"When nozzle below temperature",currentState:"Current State",turnOn:"Turn On",turnOff:"Turn Off"},filamentTracking:"Filament Tracking",filamentTrackingDesc:"Choose how to track your filament spools. You can use the built-in inventory or connect an external Spoolman server.",filamentChecks:"Filament checks",disableFilamentWarnings:"Disable filament warnings",disableFilamentWarningsDesc:"Don't show warnings about insufficient filament when printing or queueing",preferLowestFilament:"Prefer lowest remaining filament",preferLowestFilamentDesc:"When multiple spools match, use the one with the least filament remaining",trackingModeBuiltIn:"Built-in Inventory",trackingModeBuiltInDesc:"RFID auto-matching and usage tracking included",trackingModeSpoolmanDesc:"External filament management server",builtInFeatureRfid:"Automatically detects Bambu Lab RFID spools in AMS",builtInFeatureUsage:"Tracks filament consumption per print",builtInFeatureCatalog:"Manage spools, colors, and K-factor profiles",builtInFeatureThirdParty:"Third-party spools can be assigned to inventory spools",amsSyncButton:"Sync Weights from AMS",amsSyncTitle:"Sync Spool Weights from AMS",amsSyncMessage:"This will overwrite all inventory spool weights with the current AMS remain% values from connected printers. Use this to recover from corrupted weight data. Printers must be online.",amsSyncing:"Syncing...",amsSyncSuccess:"{{synced}} spool(s) synced, {{skipped}} skipped",amsSyncError:"Failed to sync weights from AMS",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL of your Spoolman server (e.g., http://localhost:7912)",spoolmanConnected:"Connected",spoolmanDisconnected:"Disconnected",status:"Status",connect:"Connect",disconnect:"Disconnect",howSyncWorks:"How Sync Works",syncInfoRfidOnly:"Only official Bambu Lab spools with RFID are synced",syncInfoAutoCreate:"New spools are auto-created in Spoolman on first sync",syncInfoThirdPartySkipped:"Non-Bambu Lab spools (third-party, refilled) are skipped",linkingExistingSpools:"Linking Existing Spools",linkingExistingSpoolsDesc:'To link existing Spoolman spools to your AMS, hover over an AMS slot and click "Link to Spoolman".',syncMode:"Sync Mode",syncModeAuto:"Automatic",syncModeManual:"Manual Only",syncModeAutoDesc:"AMS data syncs automatically when changes are detected",syncModeManualDesc:"Only sync when manually triggered",syncAmsData:"Sync AMS Data",syncAmsDataDesc:"Manually sync printer AMS data to Spoolman",allPrinters:"All Printers",noDefaultPrinter:"No default (ask each time)",sidebarOrder:"Sidebar order",saveThumbnails:"Save thumbnails",captureFinishPhoto:"Capture finish photo",noPrintersConfigured:"No printers configured",archiveMode:{always:"Always create archive entry",never:"Never create archive entry",ask:"Ask each time"},checkForUpdatesLabel:"Check for updates",checkPrinterFirmware:"Check printer firmware",includeBetaUpdates:"Include beta versions",includeBetaUpdatesDesc:"Notify about beta and prerelease versions when checking for updates",enableRetry:"Enable retry",homeAssistantDescription:"Control smart plugs via Home Assistant",environmentManagedLabel:"(Environment Managed)",autoEnabledViaEnv:"Automatically enabled via environment variables",urlFromEnvReadOnly:"Value set by HA_URL environment variable (read-only)",tokenFromEnvReadOnly:"Value set by HA_TOKEN environment variable (read-only)",mqttConnectedTo:"Connected to",prometheusDescription:"Expose printer data in Prometheus format",noSmartPlugsTitle:"No smart plugs configured",noSmartPlugsDescription:"Add a Tasmota-based smart plug to track energy usage and automate power control.",noProvidersTitle:"No providers configured",noProvidersDescription:"Add a provider to receive alerts.",noTemplatesAvailable:"No templates available. Restart the backend to seed default templates.",apiPermissionView:"View printer status and queue",apiPermissionEdit:"Add and remove items from print queue",apiKeysEmptyTitle:"No API keys",apiKeysEmptyDescription:"Create an API key to integrate with external services.",noUsersFound:"No users found",noGroupsFound:"No groups found",noGroupsAvailable:"No groups available",passwordsDoNotMatch:"Passwords do not match",systemGroupWarning:"System group names cannot be changed",authDisabledTitle:"Authentication is Disabled",authDisabledFeature1:"Require login to access the system",authDisabledFeature2:"Create multiple users with group-based permissions",authDisabledFeature3:"Control access with 50+ granular permissions",userHasCreated:"This user has created:",userItemsQuestion:"What would you like to do with these items?",deleteUserConfirm:"Are you sure you want to delete this user?",actionCannotBeUndone:"This action cannot be undone.",addFirstSmartPlug:"Add Your First Smart Plug",providers:"Providers",log:"Log",testAll:"Test All",testResults:"Test Results",testPassedCount:"{{count}} passed",testFailedCount:"{{count}} failed",messageTemplates:"Message Templates",messageTemplatesDescription:"Customize notification messages for each event.",apiKeys:"API Keys",apiKeysDescription:"Create API keys for external integrations and webhooks.",createKey:"Create Key",apiKeyCreated:"API Key Created Successfully",apiKeyCopyWarning:"Copy this key now - it won't be shown again!",useInApiBrowser:"Use in API Browser",createNewApiKey:"Create New API Key",keyName:"Key Name",keyNamePlaceholder:"e.g., Home Assistant, OctoPrint",readStatus:"Read Status",readStatusDescription:"View printer status and queue",manageQueue:"Manage Queue",manageQueueDescription:"Add and remove items from print queue",controlPrinter:"Control Printer",controlPrinterDescription:"Pause, resume, and stop prints",unnamedKey:"Unnamed Key",lastUsed:"Last used",read:"Read",control:"Control",createFirstKey:"Create Your First Key",webhookEndpoints:"Webhook Endpoints",webhookApiKeyHint:"Use your API key in the X-API-Key header.",webhook:{getAllStatus:"Get all printer status",getSpecificStatus:"Get specific printer status",addToQueue:"Add to print queue",pausePrint:"Pause print",resumePrint:"Resume print",stopPrint:"Stop print"},apiBrowser:"API Browser",apiBrowserDescription:"Explore and test all available API endpoints.",apiKeyForTesting:"API Key for Testing",apiKeyPlaceholder:"Paste your API key here to test authenticated endpoints...",apiKeyHint:"This key will be sent as X-API-Key header with requests.",deleteApiKeyTitle:"Delete API Key",deleteApiKeyMessage:"Are you sure you want to delete this API key? Any integrations using this key will stop working.",deleteKey:"Delete Key",amsDisplayThresholds:"AMS Display Thresholds",amsThresholdsDescription:"Configure color thresholds for AMS humidity and temperature indicators.",humidity:"Humidity",goodGreen:"Good (green)",fairOrange:"Fair (orange)",aboveFairBad:"Above fair threshold shows as red (bad)",fairAlsoDryingThreshold:"This threshold is also used to trigger auto-drying when enabled",temperature:"Temperature",goodBlue:"Good (blue)",aboveFairHot:"Above fair threshold shows as red (hot)",historyRetention:"History Retention",keepSensorHistory:"Keep sensor history for",historyRetentionDescription:"Older humidity and temperature data will be automatically deleted",defaultPrintOptions:"Default Print Options",defaultPrintOptionsDescription:"Set default values for print options when starting new prints. These can be overridden per print in the print dialog.",defaultBedLevelling:"Bed Levelling",defaultBedLevellingDesc:"Auto-level bed before print",defaultFlowCali:"Flow Calibration",defaultFlowCaliDesc:"Calibrate extrusion flow",defaultVibrationCali:"Vibration Calibration",defaultVibrationCaliDesc:"Reduce ringing artifacts",defaultLayerInspect:"First Layer Inspection",defaultLayerInspectDesc:"AI inspection of first layer",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Record timelapse video",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Plate-Clear Confirmation",requirePlateClear:"Require plate-clear confirmation",requirePlateClearDescription:"When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disable for farm workflows where plates are verified physically.",gcodeInjection:"G-code Injection",gcodeInjectionDescription:'Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.',gcodeInjectionNoPrinters:"No printers found. Add printers to configure G-code snippets.",gcodeStartLabel:"Start G-code",gcodeEndLabel:"End G-code",gcodeStartPlaceholder:"G-code prepended before the print starts...",gcodeEndPlaceholder:"G-code appended after the print ends...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Queue Auto-Drying",queueDryingDescription:"Automatically dry AMS filament when printer is idle between queued prints. Uses humidity threshold above to trigger drying.",queueDryingEnabled:"Enable auto-drying",queueDryingEnabledDescription:"Start AMS drying automatically when printer is idle and humidity is above threshold",queueDryingBlock:"Wait for drying to complete",queueDryingBlockDescription:"Block the print queue until drying finishes. When off, prints take priority over drying.",ambientDryingEnabled:"Ambient drying",ambientDryingEnabledDescription:"Automatically dry filament on idle printers when humidity exceeds threshold, even without queued prints.",dryingPresets:"Drying Presets",dryingPresetsDescription:"Temperature and duration per filament type. AMS 2 Pro uses lower temps, AMS-HT supports higher temps.",dryingFilament:"Filament",printModal:"Print Modal",expandCustomMapping:"Expand custom mapping by default",expandCustomMappingDescription:"When printing to multiple printers, show per-printer AMS mapping expanded",authentication:"Authentication",authEnabledDescription:"Your instance is secured with user authentication",authDisabledDescription:"Enable to require login and manage user access",authDisabledMessage:"Enable authentication to create user accounts, manage permissions, and secure your Bambuddy instance.",enableAuthentication:"Enable Authentication",currentUser:"Current User",changePassword:"Change Password",admin:"Admin",users:"Users",addUser:"Add User",groups:"Groups",addGroup:"Add Group",system:"System",noDescription:"No description",userCount:"{{count}} users",permissionCount:"{{count}} permissions",createUser:"Create User",username:"Username",enterUsername:"Enter username",password:"Password",enterPassword:"Enter password (min 6 characters)",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm password",viewReleaseOnGitHub:"View release on GitHub",turnAllPlugsOn:"Turn all plugs on",turnAllPlugsOff:"Turn all plugs off",clearNotificationLogs:"Clear Notification Logs",clearLogsMessage:"This will permanently delete all notification logs older than 30 days. This action cannot be undone.",clearLogs:"Clear Logs",resetUiPreferences:"Reset UI Preferences",resetUiPreferencesMessage:"This will reset all UI preferences to defaults: sidebar order, theme, dashboard layout, view modes, and sorting preferences. Your printers, archives, and server settings will NOT be affected. The page will reload after clearing.",resetPreferences:"Reset Preferences",deleteGroupTitle:"Delete Group",deleteGroupMessage:"Are you sure you want to delete this group? Users in this group will lose these permissions.",deleteGroup:"Delete Group",disableAuthenticationTitle:"Disable Authentication",disableAuthenticationMessage:"Are you sure you want to disable authentication? This will make your Bambuddy instance accessible without login. All users will remain in the database but authentication will be disabled.",disableAuthentication:"Disable Authentication",configureBambuddy:"Configure Bambuddy",systemDefault:"System Default",archiveSettings:"Archive Settings",newWindow:"New Window",embeddedOverlay:"Embedded Overlay",preferredSlicer:"Preferred Slicer",preferredSlicerDescription:"Choose which slicer application to open files with",externalCameras:"External Cameras",costTracking:"Cost Tracking",printsOnly:"Prints Only",totalConsumption:"Total Consumption",dataManagement:"Data Management",storageUsage:"Storage Usage",storageUsageDescription:"Breakdown of data usage by category",storageUsageTotal:"Total",storageUsageErrors:"Errors",storageUsageOtherBreakdown:"Other (includes static assets, scripts, and configuration files)",storageUsageSystem:"System",storageUsageData:"Data",storageUsageUnavailable:"Storage usage information unavailable",clearNotificationLogsDescription:"Delete notification logs older than 30 days",resetUiPreferencesDescription:"Reset sidebar order, theme, view modes, and layout preferences. Printers, archives, and settings are not affected.",enableHomeAssistant:"Enable Home Assistant",enableMqtt:"Enable MQTT",useTls:"Use TLS",enableMetricsEndpoint:"Enable Metrics Endpoint",availableMetrics:"Available Metrics",editUser:"Edit User",deleteUserTitle:"Delete User",groupName:"Group Name",leaveEmptyForAnonymous:"Leave empty for anonymous",leaveEmptyForNoAuth:"Leave empty for no authentication",enterNewPassword:"Enter new password",confirmNewPassword:"Confirm new password",enterGroupName:"Enter group name",enterDescriptionOptional:"Enter description (optional)",enterCurrentPassword:"Enter current password",enterNewPasswordMin6:"Enter new password (min 6 characters)",toast:{keyCopied:"Key copied to clipboard",copyFailed:"Failed to copy key",keyAddedToBrowser:"Key added to API Browser",clearLogsFailed:"Failed to clear logs",uiPreferencesReset:"UI preferences reset. Refreshing...",authDisabled:"Authentication disabled successfully",authDisableFailed:"Failed to disable authentication",apiKeyCreated:"API key created",apiKeyDeleted:"API key deleted",userCreated:"User created successfully",userUpdated:"User updated successfully",userDeleted:"User deleted successfully",groupCreated:"Group created successfully",groupUpdated:"Group updated successfully",groupDeleted:"Group deleted successfully",fillRequiredFields:"Please fill in all required fields",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters",enterGroupName:"Please enter a group name",settingsSaved:"Settings saved",cameraSettingsSaved:"Camera settings saved",enterCameraUrl:"Please enter a camera URL",passwordChanged:"Password changed successfully",connectionFailed:"Connection failed",testFailed:"Test failed",cameraConnected:"Camera connected{{resolution}}"},testConnection:"Test Connection",catalog:{spoolCatalog:"Spool Catalog",spoolCatalogDescription:"Empty spool weights by brand/type. Used for automatic weight lookup when adding spools.",searchCatalog:"Search catalog...",addNewEntry:"Add New Entry",namePlaceholder:"Name (e.g., Bambu Lab - Plastic)",weight:"Weight",type:"Type",default:"Default",custom:"Custom",noMatch:"No entries match your search",empty:"No entries in catalog",deleteEntry:"Delete Entry",deleteConfirm:'Are you sure you want to delete "{{name}}"?',resetCatalog:"Reset Catalog",resetConfirm:"Reset catalog to defaults? This will remove all custom entries.",loadFailed:"Failed to load spool catalog",nameWeightRequired:"Name and weight are required",entryAdded:"Entry added",addFailed:"Failed to add entry",entryUpdated:"Entry updated",updateFailed:"Failed to update entry",entryDeleted:"Entry deleted",deleteFailed:"Failed to delete entry",resetSuccess:"Catalog reset to defaults",resetFailed:"Failed to reset catalog",exported:"Exported {{count}} entries",imported:"Imported {{added}} entries ({{skipped}} skipped)",importFailed:"Failed to import: invalid JSON format",exportTooltip:"Export catalog to JSON",importTooltip:"Import catalog from JSON",resetTooltip:"Reset to defaults",selectedCount:"{{count}} selected",deleteSelected:"Delete Selected",bulkDeleteConfirm:"Are you sure you want to delete {{count}} entries?",bulkDeleted:"Deleted {{count}} entries",bulkDeleteFailed:"Failed to delete entries"},colorCatalog:{title:"Color Catalog",description:"Filament colors by manufacturer/material. Used for automatic color lookup when adding spools.",searchColors:"Search colors...",allManufacturers:"All manufacturers",addNewColor:"Add New Color",manufacturer:"Manufacturer",colorName:"Color Name",hex:"Hex",materialOptional:"Material (optional)",showing:"Showing {{filtered}} of {{total}} colors",noMatch:"No colors match your search",empty:"No colors in catalog",deleteColor:"Delete Color",deleteConfirm:'Are you sure you want to delete "{{name}}"?',resetCatalog:"Reset Color Catalog",resetConfirm:"Reset catalog to defaults? This will remove all custom colors.",sync:"Sync",starting:"Starting...",syncTooltip:"Sync from FilamentColors.xyz (2000+ colors, may take a minute)",loadFailed:"Failed to load color catalog",fieldsRequired:"Manufacturer, color name, and hex color are required",colorAdded:"Color added",addFailed:"Failed to add color",colorUpdated:"Color updated",updateFailed:"Failed to update color",colorDeleted:"Color deleted",deleteFailed:"Failed to delete color",resetSuccess:"Color catalog reset to defaults",resetFailed:"Failed to reset catalog",syncUpToDate:"Already up to date ({{count}} colors checked)",syncComplete:"Added {{added}} new colors ({{skipped}} already existed)",syncError:"Sync error",syncFailed:"Failed to sync from FilamentColors.xyz",exported:"Exported {{count}} colors",imported:"Imported {{added}} colors ({{skipped}} skipped)",importFailed:"Failed to import: invalid JSON format",selectedCount:"{{count}} selected",deleteSelected:"Delete Selected",bulkDeleteConfirm:"Are you sure you want to delete {{count}} colors?",bulkDeleted:"Deleted {{count}} colors",bulkDeleteFailed:"Failed to delete colors"},dateFormat:"Date Format",dateFormatUs:"US (MM/DD/YYYY)",dateFormatEu:"EU (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"Time Format",timeFormat12:"12-hour (3:30 PM)",timeFormat24:"24-hour (15:30)",defaultPrinter:"Default Printer",defaultPrinterDescription:"Pre-select this printer for uploads, reprints, and other operations.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Drag items in the sidebar to reorder. Reset to default order here.",setDefault:"Set Default",sidebarOrderSetDefaultHint:"Set default applies the current menu order to users who haven't customized theirs.",sidebarDefaultSet:"Default menu order has been set.",sidebarDefaultCleared:"Default menu order cleared.",sidebarDefaultFailed:"Failed to set default menu order.",reset:"Reset",darkMode:"Dark Mode",lightMode:"Light Mode",active:"(active)",background:"Background",accent:"Accent",style:"Style",bgNeutral:"Neutral",bgWarm:"Warm",bgCool:"Cool",bgOled:"OLED Black",bgSlate:"Slate Blue",bgForest:"Forest Green",accentGreen:"Green",accentTeal:"Teal",accentBlue:"Blue",accentOrange:"Orange",accentPurple:"Purple",accentRed:"Red",styleClassic:"Classic",styleGlow:"Glow",styleVibrant:"Vibrant",themeToggleHint:"Toggle between dark and light mode using the sun/moon icon in the sidebar.",autoArchivePrints:"Auto-archive prints",autoArchiveDescription:"Automatically save 3MF files when prints complete",saveThumbnailsDescription:"Extract and save preview images from 3MF files",captureFinishPhotoDescription:"Take a photo from printer camera when print completes",ffmpegNotInstalled:"ffmpeg not installed",ffmpegRequired:"Camera capture requires ffmpeg. Install it via brew install ffmpeg (macOS) or apt install ffmpeg (Linux).",camera:"Camera",cameraViewMode:"Camera View Mode",cameraOverlayDescription:"Camera opens in a resizable overlay on the main screen",cameraWindowDescription:"Camera opens in a separate browser window",externalCamerasDescription:"Configure external cameras to replace the built-in printer camera. Supports MJPEG streams, RTSP, HTTP snapshots, and USB cameras (V4L2). When enabled, the external camera is used for live view and finish photos.",cameraPlaceholderUsb:"Device path (/dev/video0)",cameraPlaceholderUrl:"Camera URL (rtsp://... or http://...)",cameraTypeMjpeg:"MJPEG Stream",cameraTypeRtsp:"RTSP Stream",cameraTypeSnapshot:"HTTP Snapshot",cameraTypeUsb:"USB Camera (V4L2)",cameraRotation:"Rotation",test:"Test",connected:"Connected",disconnected:"Disconnected",currency:"Currency",defaultFilamentCost:"Default filament cost (per kg)",electricityCost:"Electricity cost per kWh",energyDisplayMode:"Energy display mode",energyModePrintDescription:"Dashboard shows sum of energy used during prints",energyModeTotalDescription:"Dashboard shows lifetime energy from smart plugs",fileManager:"File Manager",createArchiveEntry:"Create Archive Entry When Printing",createArchiveEntryDescription:"When printing from File Manager, optionally create an archive entry",lowDiskSpaceWarning:"Low Disk Space Warning",lowDiskSpaceDescription:"Show warning when free disk space falls below this threshold",printerFirmware:"Printer Firmware",checkFirmwareDescription:"Check for printer firmware updates from Bambu Lab",bambuddySoftware:"Bambuddy Software",autoCheckDescription:"Automatically check for new versions on startup",checkNow:"Check now",updateAvailableVersion:"Update available: v{{version}}",releaseNotes:"Release Notes",updateViaDocker:"Update via Docker Compose:",installUpdate:"Install Update",latestVersionRunning:"You're running the latest version",failedToCheckUpdates:"Failed to check for updates: {{error}}",backupRestore:"Backup & Restore",backupRestoreDescription:"Export/import settings and configure GitHub backup",goToBackup:"Go to Backup",externalUrl:"External URL",externalUrlDescription:"The external URL where Bambuddy is accessible. Used for notification images and external integrations.",bambuddyUrl:"Bambuddy URL",externalUrlHint:"Include protocol and port (e.g., http://192.168.1.100:8000)",ftpRetry:"FTP Retry",ftpRetryDescription:"Retry FTP operations when printer WiFi is unreliable. Applies to 3MF downloads, print uploads, timelapse downloads, and firmware updates.",autoRetryDescription:"Automatically retry failed FTP operations",retryAttempts:"Retry attempts",retryDelay:"Retry delay",connectionTimeout:"Connection timeout",time_one:"{{count}} time",time_other:"{{count}} times",second_one:"{{count}} second",second_other:"{{count}} seconds",nSeconds:"{{count}} seconds",increaseForWeakWifi:"Increase for printers with weak WiFi",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Connect to Home Assistant to control smart plugs via HA's REST API. Supports switch, light, input_boolean, and script entities.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Long-Lived Access Token",haTokenHint:"Create a token in HA: Profile → Long-Lived Access Tokens → Create Token",connectionSuccessful:"Connection Successful",connectionFailed:"Connection Failed",haConnectionSuccess:"Successfully connected to Home Assistant.",haConnectionFailed:"Failed to connect to Home Assistant.",mqttPublishing:"MQTT Publishing",mqttDescription:"Publish BamBuddy events to an external MQTT broker for integration with Node-RED, Home Assistant, and other automation systems.",mqttEnableDescription:"Publish events to external MQTT broker",brokerHostname:"Broker hostname",port:"Port",usernameOptional:"Username (optional)",passwordOptional:"Password (optional)",topicPrefix:"Topic prefix",topicPrefixHint:"Topics will be: {{prefix}}/printers//status, etc.",prometheusMetrics:"Prometheus Metrics",prometheusEndpointDescription:"Expose printer metrics at /api/v1/metrics for Prometheus/Grafana monitoring.",bearerTokenOptional:"Bearer Token (optional)",bearerTokenHint:"If set, requests must include Authorization: Bearer ",metricsConnectionStatus:"Connection status",metricsPrinterState:"Printer state (idle/printing/etc)",metricsPrintProgress:"Print progress 0-100%",metricsBedTemp:"Bed temperature",metricsNozzleTemp:"Nozzle temperature",metricsPrintsTotal:"Total prints by result",metricsMore:"...and more (layers, fans, queue, filament usage)",smartPlugsDescription:"Connect smart plugs (Tasmota or Home Assistant) to automate power control and track energy usage for your printers.",allOn:"All On",allOff:"All Off",addSmartPlug:"Add Smart Plug",energySummary:"Energy Summary",currentPower:"Current Power",plugsOnline:"{{reachable}}/{{total}} plugs online",today:"Today",yesterday:"Yesterday",total:"Total",enablePlugsForSummary:"Enable plugs to see energy summary",addNotificationProvider:"Add",systemBadge:"(System)",creating:"Creating...",changing:"Changing...",deleteUserAndItems:"Delete user AND their items",deleteUserKeepItems:"Delete user, keep items (become ownerless)",ok:"OK",twoFa:{totpTitle:"Authenticator App (TOTP)",totpDesc:"Use an authenticator app like Google Authenticator, Aegis or Authy.",emailOtpTitle:"Email OTP",emailOtpDesc:"Send a one-time code to {{email}} when you log in.",emailOtpNoEmail:"Add an email address to your account to enable this method.",addEmailFirst:"Your account has no email address. Ask an admin to add one before enabling Email OTP.",setupTotp:"Set up Authenticator App",setupAuthApp:"Set up Authenticator App",setupInstructions:"Scan the QR code below with your authenticator app, then confirm with a code.",manualEntry:"Can't scan? Enter this secret manually:",scannedContinue:"I've scanned the code — continue",enterCodeToConfirm:"Enter the 6-digit code from your authenticator app to confirm setup.",activate:"Activate",disableTotp:"Disable Authenticator",disableConfirmHint:"Enter a valid TOTP code or a backup code to disable the authenticator.",totpDisabled:"Authenticator app disabled.",emailOtpEnabled:"Email OTP enabled.",emailOtpDisabled:"Email OTP disabled.",smtpRequired:"Please configure and test SMTP settings first.",invalidCode:"Invalid code. Please try again.",enableEmailOtp:"Enable Email OTP",disableEmailOtp:"Disable Email OTP",emailSetupEnterCode:"A verification code has been sent to your email address. Enter it below to confirm you own this inbox.",verifyAndEnable:"Verify & Enable",emailDisablePasswordHint:"Enter your account password to confirm disabling email OTP.",passwordPlaceholder:"Enter your password",backupCodesTitle:"Save your backup codes",backupCodesWarning:"Save these codes somewhere safe. Each code can only be used once and they will not be shown again.",backupCodesRemaining:"{{count}} backup codes remaining",savedCodes:"I've saved my codes",regenBackup:"Regenerate Backup Codes",regenBackupHint:"Enter your current TOTP code to generate 10 new backup codes. All existing backup codes will be invalidated.",newBackupCodes:"New backup codes",linkedAccounts:"Linked SSO Accounts",linkedAccountsDesc:"These external identity providers are linked to your account.",oidcUnlinked:"Account unlinked."},oidc:{title:"SSO / OIDC Providers",desc:"Configure OpenID Connect providers to allow single sign-on via external identity providers.",addProvider:"Add Provider",newProvider:"New Provider",empty:"No OIDC providers configured yet.",created:"Provider created.",updated:"Provider updated.",deleted:"Provider deleted.",deleteTitle:"Delete Provider",deleteMessage:'Delete "{{name}}"? All linked user accounts will be disconnected.',form:{name:"Display Name",issuerUrl:"Issuer URL",clientId:"Client ID",clientSecret:"Client Secret",scopes:"Scopes",iconUrl:"Icon URL (optional)",enabled:"Enabled",autoCreate:"Auto-create users",autoCreateDesc:"Automatically create a local account on first login.",autoLink:"Auto-link existing accounts",autoLinkDesc:"Link existing local accounts by matching email on first login.",secretHint:"leave blank to keep current",secretPlaceholder:"new secret"}}},notification:{printStarted:{title:"Print Started",body:"{{printer}}: {{filename}} has started printing"},printCompleted:{title:"Print Completed",body:"{{printer}}: {{filename}} completed successfully"},printFailed:{title:"Print Failed",body:"{{printer}}: {{filename}} has failed"},printStopped:{title:"Print Stopped",body:"{{printer}}: {{filename}} was stopped"},printProgress:{title:"Print Progress",body:"{{printer}}: {{filename}} is {{percent}}% complete"},printerOffline:{title:"Printer Offline",body:"{{printer}} is offline"},printerError:{title:"Printer Error",body:"{{printer}}: {{error}}"},filamentLow:{title:"Low Filament",body:"{{printer}}: Filament is running low"},maintenanceDue:{title:"Maintenance Due",body:"{{printer}}: {{items}} need attention"}},errors:{generic:"Something went wrong",networkError:"Network error. Please check your connection.",notFound:"Not found",unauthorized:"Unauthorized",serverError:"Server error",validationError:"Please check your input",printerConnectionFailed:"Failed to connect to printer",saveFailed:"Failed to save changes",deleteFailed:"Failed to delete",loadFailed:"Failed to load data"},hmsErrors:{title:"Errors - {{name}}",noErrors:"No errors",viewOnWiki:"View on Bambu Lab Wiki",clearInstructions:"Clear errors on the printer to dismiss them here.",clearErrors:"Clear Errors",clearSuccess:"HMS errors cleared",clearFailed:"Failed to clear HMS errors"},mqttDebug:{title:"MQTT Debug Log",searchPlaceholder:"Search topic or payload...",noMessages:"No messages logged yet",startLoggingHint:'Click "Start Logging" to begin capturing MQTT messages',noMessagesMatch:"No messages match your filter",adjustFilterHint:"Try adjusting your search or filter criteria",incoming:"Incoming",outgoing:"Outgoing",loggingStopped:"Logging stopped",loggingActive:"Logging active - messages will auto-refresh",startLogging:"Start Logging",stopLogging:"Stop Logging",clearLog:"Clear Log",topic:"Topic",timestamp:"Timestamp",direction:"Direction",all:"All"},printerFiles:{title:"File Manager",storageUsed:"Used:",storageFree:"Free:",filterPlaceholder:"Filter files...",deleteButton:"Delete",deleteFiles:"Delete {{count}} Files",deleteFileConfirm:'Delete "{{name}}"? This cannot be undone.',deleteFilesConfirm:"Delete {{count}} selected files? This cannot be undone.",noFiles:"No files on printer",loadingFiles:"Loading files...",failedToLoad:"Failed to load files",toast:{filesDeleted:"Deleted {{count}} file(s)",deleteFailed:"Delete failed: {{error}}"}},confirm:{delete:"Are you sure you want to delete this?",unsavedChanges:"You have unsaved changes. Are you sure you want to leave?",clearQueue:"Are you sure you want to clear the queue?"},login:{title:"Bambuddy Login",subtitle:"Sign in to your account",username:"Username",usernamePlaceholder:"Enter your username",usernameOrEmail:"Username or Email",usernameOrEmailPlaceholder:"Username or @ Email",password:"Password",passwordPlaceholder:"Enter your password",signIn:"Sign in",signingIn:"Logging in...",forgotPassword:"Forgot your password?",loginSuccess:"Logged in successfully",loginFailed:"Login failed",enterCredentials:"Please enter username and password",enterEmail:"Please enter your email address",oidcLoginFailed:"OIDC login failed",oidcErrors:{providerError:"The identity provider returned an error",missingParameters:"OIDC callback is missing required parameters",invalidState:"OIDC state is invalid or has already been used",stateExpired:"OIDC login session expired — please try again",providerNotFound:"OIDC provider not found",discoveryFailed:"Failed to fetch OIDC discovery document",invalidDiscovery:"OIDC discovery document is invalid",networkError:"Network error during OIDC token exchange",badResponse:"Unexpected response during OIDC token exchange",noIdToken:"OIDC provider did not return an ID token",validationFailed:"OIDC token validation failed",nonceMismatch:"OIDC nonce mismatch — possible replay attack",missingSubClaim:"OIDC token is missing the sub claim",noLinkedAccount:"No local account is linked to this OIDC identity",accountInactive:"Your account is inactive",userResolutionFailed:"Failed to resolve your account",internalError:"An internal error occurred during OIDC login",tokenExchangeFailed:"OIDC token exchange failed"},forgotPasswordTitle:"Forgot Password",forgotPasswordMessage:"If you've forgotten your password, please contact your system administrator to reset it.",forgotPasswordEmailMessage:"Enter your email address and we'll send you a new password.",emailAddress:"Email Address",emailPlaceholder:"your.email@example.com",cancel:"Cancel",sending:"Sending...",sendResetEmail:"Send Reset Email",howToReset:"How to reset your password:",resetStep1:"Contact your Bambuddy administrator",resetStep2:"Ask them to reset your password in User Management",resetStep3:"They can set a new temporary password for you",resetStep4:"Log in with the new password and change it in Settings",gotIt:"Got it",resetPassword:{title:"Set New Password",subtitle:"Enter and confirm your new password below.",newPassword:"New Password",newPasswordPlaceholder:"At least 8 characters",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Repeat new password",saving:"Saving…",submit:"Set New Password",backToLogin:"Back to login",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 8 characters",resetFailed:"Password reset failed. The link may have expired."},twoFA:{title:"Two-Factor Authentication",subtitle:"Your account is protected with 2FA. Enter the verification code below.",methodAuthenticator:"Authenticator App",methodEmail:"Email Code",methodBackup:"Backup Code",instructionsTotp:"Open your authenticator app and enter the 6-digit code for Bambuddy.",instructionsEmail:"A 6-digit code has been sent to your email address. It expires in 10 minutes.",instructionsEmailNotSent:"Click the button below to receive a verification code via email.",instructionsBackup:"Enter one of your 8-character backup recovery codes. Each code can only be used once.",sendCodeButton:"Send Code via Email",sendingCode:"Sending...",resendCode:"Resend code",codeLabel:"Verification Code",backupCodeLabel:"Backup Code",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verify",verifyingButton:"Verifying...",backToLogin:"← Back to login",orContinueWith:"or continue with",signInWith:"Sign in with {{provider}}",enterCode:"Please enter the verification code",sendCodeFailed:"Failed to send verification code",invalidCode:"Invalid code. Please try again."}},setup:{title:"Bambuddy Setup",subtitle:"Configure authentication for your Bambuddy instance",enableAuth:"Enable Authentication",adminAccount:"Admin Account",adminAccountDesc:"If admin users already exist, authentication will be enabled using the existing admin accounts. Leave the fields below empty to use existing admins, or enter new credentials to create a new admin user.",adminUsername:"Admin Username",adminPassword:"Admin Password",optionalIfAdminExists:"(optional if admin users exist)",adminUsernamePlaceholder:"Enter admin username (optional)",adminPasswordPlaceholder:"Enter admin password (optional)",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm admin password",settingUp:"Setting up...",completeSetup:"Complete Setup",toast:{authEnabledAdminCreated:"Authentication enabled and admin user created",authEnabledExistingAdmins:"Authentication enabled using existing admin users",setupCompleted:"Setup completed",enterBothCredentials:"Please enter both admin username and password, or leave both empty to use existing admin users",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters"}},changePassword:{title:"Change Password",currentPassword:"Current Password",currentPasswordPlaceholder:"Enter current password",newPassword:"New Password",newPasswordPlaceholder:"Enter new password (min 6 characters)",confirmPassword:"Confirm New Password",confirmPasswordPlaceholder:"Confirm new password",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters",changing:"Changing...",success:"Password changed successfully",failed:"Failed to change password"},plateAlert:{title:"Print Paused!",message:"Objects detected on build plate. The print has been automatically paused. Please clear the plate and resume the print.",understand:"I Understand"},camera:{title:"Camera View",invalidPrinterId:"Invalid printer ID",live:"Live",snapshot:"Snapshot",restartStream:"Restart stream",refreshSnapshot:"Refresh snapshot",fullscreen:"Fullscreen",exitFullscreen:"Exit fullscreen",connectingToCamera:"Connecting to camera...",capturingSnapshot:"Capturing snapshot...",connectionLost:"Connection lost",connectionFailed:"Camera connection failed",reconnecting:"Reconnecting in {{countdown}}s... (attempt {{attempt}}/{{max}})",reconnectNow:"Reconnect now",cameraUnavailable:"Camera unavailable",cameraUnavailableDesc:"Make sure the printer is powered on and connected.",noCamera:"No camera available",retry:"Retry",cameraStream:"Camera stream",zoomOut:"Zoom out",zoomIn:"Zoom in",resetZoom:"Reset zoom",recording:"Recording",startRecording:"Start Recording",stopRecording:"Stop Recording",chamberLight:"Toggle chamber light"},groups:{title:"Group Management",subtitle:"Manage permission groups for access control",backToSettings:"Back to Settings",createGroup:"Create Group",noPermission:"You do not have permission to access this page.",system:"System",noDescription:"No description",usersCount:"{{count}} users",permissionsCount:"{{count}} permissions",edit:"Edit",delete:"Delete",toast:{created:"Group created successfully",updated:"Group updated successfully",deleted:"Group deleted successfully",enterGroupName:"Please enter a group name"},modal:{editGroup:"Edit Group",createGroup:"Create Group",cancel:"Cancel",saving:"Saving...",creating:"Creating...",saveChanges:"Save Changes"},form:{groupName:"Group Name",groupNamePlaceholder:"Enter group name",systemGroupWarning:"System group names cannot be changed",description:"Description",descriptionPlaceholder:"Enter description (optional)",permissions:"Permissions ({{count}} selected)"},deleteModal:{title:"Delete Group",message:"Are you sure you want to delete this group? Users in this group will lose these permissions.",confirm:"Delete Group"},editor:{title:"Edit Group",createTitle:"Create Group",search:"Search permissions...",selectAll:"Select All",clearAll:"Clear All",permissionsSelected:"{{count}} selected",noResults:"No permissions match your search"}},users:{title:"User Management",subtitle:"Manage users and their access to your Bambuddy instance",backToSettings:"Back to Settings",createUser:"Create User",noPermission:"You do not have permission to access this page.",admin:"Admin",noGroups:"No groups",active:"Active",inactive:"Inactive",edit:"Edit",delete:"Delete",system:"System",noGroupsAvailable:"No groups available",table:{username:"Username",groups:"Groups",status:"Status",actions:"Actions"},toast:{created:"User created successfully",updated:"User updated successfully",deleted:"User deleted successfully",fillRequired:"Please fill in all required fields",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters"},modal:{createUser:"Create User",editUser:"Edit User",cancel:"Cancel",creating:"Creating...",saving:"Saving...",saveChanges:"Save Changes",advancedAuthSubtitle:"with Advanced Authentication"},form:{username:"Username",usernamePlaceholder:"Enter username",email:"Email",emailPlaceholder:"user@example.com",password:"Password",passwordPlaceholder:"Enter password",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm password",newPasswordPlaceholder:"Enter new password",confirmNewPasswordPlaceholder:"Confirm new password",leaveBlankToKeep:"leave blank to keep current",groups:"Groups",optional:"optional",autoGeneratedPassword:"A secure password will be automatically generated and emailed to the user.",passwordManagedByAdvancedAuth:'Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.',resetPassword:"Reset Password",resettingPassword:"Resetting Password..."},deleteModal:{title:"Delete User",message:"Are you sure you want to delete this user? This action cannot be undone.",confirm:"Delete User"}},streamOverlay:{title:"Stream Overlay",invalidPrinterId:"Invalid printer ID",cameraStream:"Camera stream",progress:"Progress",eta:"ETA",printerIdle:"Printer is idle",printerOffline:"Printer offline",status:{printing:"Printing",paused:"Paused",finished:"Finished",failed:"Failed",idle:"Idle",unknown:"Unknown"}},profiles:{title:"Profiles",subtitle:"Manage your slicer presets and pressure advance calibrations",tabs:{cloud:"Cloud Profiles",local:"Local Profiles",kprofiles:"K-Profiles"},localProfiles:{title:"Local Profiles",subtitle:"Import and manage slicer presets from OrcaSlicer",import:"Import Profiles",importDesc:"Drop .bbscfg, .bbsflmt, .orca_filament, .zip, or .json files here",importing:"Importing...",search:"Search local presets...",noPresets:"No local presets yet",badge:"Local",edit:"Edit",delete:"Delete",cancel:"Cancel",deleteConfirmTitle:"Delete Preset",deleteConfirm:"Are you sure you want to delete this preset? This cannot be undone.",source:"Source",inheritsFrom:"Inherits",filamentType:"Type",vendor:"Vendor",compatiblePrinters:"Printers",nozzleTemp:"Nozzle Temp",cost:"Cost",density:"Density",pressureAdvance:"Pressure Advance",filament:"Filament",process:"Process",printer:"Printer",toast:{importSuccess:"{{count}} preset(s) imported",importSkipped:"{{count}} preset(s) skipped (duplicates)",importError:"{{count}} error(s) during import",deleted:"Preset deleted",updated:"Preset updated"}},connectedAs:"Connected as",logout:"Logout",noLogoutPermission:"You do not have permission to logout",failedToLoad:"Failed to load profiles",retry:"Retry",time:{justNow:"Just now",minsAgo:"{{count}}m ago",hoursAgo:"{{count}}h ago",daysAgo:"{{count}}d ago"},toast:{loggedOut:"Logged out"},login:{title:"Connect to Bambu Cloud",subtitle:"Sync your slicer presets across devices",email:"Email",password:"Password",region:"Region",regionGlobal:"Global",regionChina:"China",verificationCode:"Verification Code",totpCode:"Authenticator Code",checkEmail:"Check your email ({{email}}) for a 6-digit code",enterTotpHint:"Enter the 6-digit code from your authenticator app",accessToken:"Access Token",accessTokenHint:"Paste your Bambu Lab access token (from Bambu Studio)",back:"Back",loginButton:"Login",verifyButton:"Verify",setTokenButton:"Set Token",useToken:"Use access token instead",useEmail:"Login with email instead",toast:{loggedIn:"Logged in successfully",codeSent:"Verification code sent to your email",enterTotp:"Enter code from your authenticator app",tokenSet:"Token set successfully"}},presets:{myPreset:"My preset (editable)",duplicate:"Duplicate",editable:"Editable",failedToLoadDetails:"Failed to load preset details",deleteConfirm:"Delete this preset?",deleteWarning:'This will permanently delete "{{name}}" from Bambu Cloud. This cannot be undone.',noDuplicatePermission:"You do not have permission to duplicate presets",noEditPermission:"You do not have permission to edit presets",noDeletePermission:"You do not have permission to delete presets",types:{filament:"Filament preset",printer:"Printer preset",process:"Process preset"},toast:{deleted:"Preset deleted",created:"Preset created",updated:"Preset updated",duplicated:"Preset duplicated",fieldAdded:'Field "{{key}}" added',exported:"Preset exported"},baseLabel:"Base: {{name}}",currentLabel:"Current: {{name}}",newPreset:"New Preset",editPreset:"Edit Preset",duplicatePreset:"Duplicate Preset",createNewPreset:"Create New Preset",customizeSettings:"Customize settings for your new preset",compareWithBase:"Compare with base preset",compare:"Compare",basePreset:"Base Preset",selectBasePreset:"Select base preset...",presetName:"Preset Name",myCustomPreset:"My custom preset",inheritsFrom:"Inherits from",dropJsonToImport:"Drop JSON to import",tabs:{common:"Common",allFields:"All Fields"},availableFields:"Available Fields",searchFieldsPlaceholder:"Search fields...",noMatchingFields:"No matching fields",allFieldsAdded:"All fields added",addCustomField:"Add custom field",yourOverrides:"Your Overrides",noOverridesYet:"No overrides yet",clickFieldsToAdd:"Click fields on the left to add them",saveAsTemplate:"Save as template",jsonTip:"Tip: Drag & drop a .json file anywhere on this modal to import settings"},cloudView:{searchPlaceholder:"Search presets...",templates:"Templates",refresh:"Refresh",newPreset:"New Preset",clearFilters:"Clear filters",compareMode:"Compare Mode",selectAnotherPreset:"Select another {{type}} preset",clickTwoPresets:"Click two presets of the same type to compare",selectFirst:"1. Select first",selectSecond:"2. Select second",compareNow:"Compare Now",lastSynced:"Last synced:",showingCount:"Showing {{showing}} of {{total}} presets",noPresetsFound:"No presets found",columns:{filament:"Filament",process:"Process",printer:"Printer"},noFilamentPresets:"No filament presets",noProcessPresets:"No process presets",noPrinterPresets:"No printer presets",filters:{type:"Type",owner:"Owner",printer:"Printer",nozzle:"Nozzle",filament:"Filament",layer:"Layer",all:"All",myPresets:"My Presets",builtIn:"Built-in",process:"Process"},noTemplatesPermission:"You do not have permission to manage templates",noRefreshPermission:"You do not have permission to refresh profiles",noCreatePermission:"You do not have permission to create presets"},templates:{title:"Quick Templates",noTemplates:"No templates yet",createFirst:"Create templates from the preset editor",typeFilter:"Type:",deleteTitle:"Delete Template",deleteWarning:"This action cannot be undone",deleteConfirm:'Are you sure you want to delete "{{name}}"?',namePlaceholder:"Template name",descriptionPlaceholder:"Description",settingsJson:"Settings (JSON)",fieldsCount:"{{count}} fields",shownInModals:"Shown in modals",hiddenInModals:"Hidden in modals",apply:"Apply",toast:{deleted:"Template deleted",updated:"Template updated",created:"Template created",applied:"Template applied"}}},support:{debugLoggingActive:"Debug logging is active",manageLogs:"Manage",collectItem7:"Printer connectivity and firmware versions",collectItem8:"Integration status (Spoolman, MQTT, HA)",collectItem9:"Network interfaces (subnets only)",collectItem10:"Python package versions",collectItem11:"Database health checks",collectItem12:"Docker environment details"},fileManager:{title:"File Manager",subtitle:"Organize and manage your print files",uploadFiles:"Upload Files",newFolder:"New Folder",folderName:"Folder Name",folderNamePlaceholder:"e.g., Functional Parts",renameFile:"Rename File",renameFolder:"Rename Folder",moveFiles:"Move {{count}} File(s)",rootNoFolder:"Root (No Folder)",current:"current",linkFolder:"Link Folder",linkFolderDescription:'Link "{{name}}" to a project or archive for quick access.',project:"Project",archive:"Archive",noProjectsFound:"No projects found",noArchivesFound:"No archives found",unlink:"Unlink",link:"Link",dragDropFiles:"Drag & drop files here",dropFilesHere:"Drop files here",orClickToBrowse:"or click to browse",allFileTypesSupported:"All file types supported. ZIP files will be extracted.",zipFilesDetected:"ZIP files detected",zipExtractOptions:"ZIP files will be extracted. Choose how to handle folder structure:",preserveZipStructure:"Preserve folder structure from ZIP",createFolderFromZip:"Create folder from ZIP filename",stlThumbnailGeneration:"STL thumbnail generation",zipMayContainStl:"ZIP files may contain STL files. Thumbnails can be generated during extraction.",thumbnailsCanBeGenerated:"Thumbnails can be generated for STL files. Large models may take longer to process.",generateThumbnailsForStl:"Generate thumbnails for STL files",threemfDetected:"3MF files detected",threemfExtractionInfo:"Printer model, material, color, and print settings will be automatically extracted from 3MF files.",willBeExtracted:"Will be extracted",filesExtracted:"{{count}} files extracted",uploadComplete:"Upload complete: {{succeeded}} succeeded",uploadFailed:"Upload failed",zipFilesFailed:"{{count}} files failed",uploading:"Uploading...",changeLink:"Change Link...",linkTo:"Link to...",linkToProjectOrArchive:"Link to project or archive",addToQueue:"Add to Queue",schedulePrint:"Schedule",generateThumbnail:"Generate Thumbnail",generateThumbnails:"Generate Thumbnails",generateThumbnailsForMissing:"Generate thumbnails for STL files missing them",gridView:"Grid view",listView:"List view",lowDiskSpaceWarning:"Low disk space warning",lowDiskSpaceDetails:"Only {{free}} free of {{total}} total. Threshold is set to {{threshold}} GB in settings.",files:"Files",folders:"Folders",size:"Size",free:"Free",allFiles:"All Files",wrap:"Wrap",enableTextWrapping:"Enable text wrapping",disableTextWrapping:"Disable text wrapping",dragToResizeTooltip:"Drag to resize, double-click to reset",searchFiles:"Search files...",allTypes:"All types",prints:"Prints",ascending:"Ascending",descending:"Descending",resultsCount:"{{showing}} of {{total}} files",selectAll:"Select All",deselectAll:"Deselect All",selected:"{{count}} selected",adding:"Adding...",loadingFiles:"Loading files...",folderIsEmpty:"Folder is empty",noFilesYet:"No files yet",folderEmptyDescription:"Upload files or move files into this folder to get started.",noFilesDescription:"Upload files to start organizing your print-related files.",noMatchingFiles:"No matching files",noMatchingFilesDescription:"No files match your current search or filter criteria.",clearFilters:"Clear filters",printedCount:"Printed {{count}}x",uploadedBy:"Uploaded By",deleteFolder:"Delete Folder",deleteFile:"Delete File",deleteFilesCount:"Delete {{count}} Files",deleteFolderConfirm:"Are you sure you want to delete this folder? All files inside will also be deleted.",deleteFileConfirm:"Are you sure you want to delete this file?",deleteFilesConfirm:"Are you sure you want to delete {{count}} selected files? This action cannot be undone.",deleting:"Deleting...",noPermissionRenameFolder:"You do not have permission to rename folders",noPermissionLinkFolder:"You do not have permission to link folders",noPermissionDeleteFolder:"You do not have permission to delete folders",noPermissionPrint:"You do not have permission to print",noPermissionAddToQueue:"You do not have permission to add to queue",noPermissionDownload:"You do not have permission to download files",noPermissionRenameFile:"You do not have permission to rename this file",noPermissionGenerateThumbnail:"You do not have permission to generate thumbnails",noPermissionDeleteFile:"You do not have permission to delete this file",noPermissionCreateFolder:"You do not have permission to create folders",noPermissionUpload:"You do not have permission to upload files",noPermissionMoveFiles:"You do not have permission to move files",noPermissionDeleteFiles:"You do not have permission to delete files",linkExternal:"Link External",linkExternalFolder:"Link External Folder",linkExternalFolderDescription:"Mount a host directory (NAS, USB, network share) into the File Manager. Files are not copied — they are accessed directly from the original path.",externalFolderNamePlaceholder:"e.g., NAS Prints",externalPath:"Host Path",externalPathHelp:"Absolute path to the directory on the Docker host. Must be bind-mounted into the container.",readOnly:"Read Only",readOnlyHelp:"prevents uploads and deletions",showHiddenFiles:"Show hidden files (dotfiles)",externalFolder:"External Folder",scanFolder:"Scan",toast:{folderCreated:"Folder created",folderDeleted:"Folder deleted",fileDeleted:"File deleted",filesDeleted:"Deleted {{count}} files",filesMoved:"Files moved",folderLinked:"Folder linked",folderUnlinked:"Folder unlinked",externalFolderLinked:"External folder linked and scanned",folderScanned:"Scan complete: {{added}} added, {{removed}} removed",addedToQueue:"Added {{count}} file(s) to queue",addedToQueuePartial:"Added {{added}} file(s), {{failed}} failed",failedToAddToQueue:"Failed to add files: {{error}}",fileRenamed:"File renamed",folderRenamed:"Folder renamed",thumbnailsGenerated:"Generated {{count}} thumbnail(s)",thumbnailsGeneratedPartial:"Generated {{succeeded}} thumbnail(s), {{failed}} failed",noStlMissingThumbnails:"No STL files missing thumbnails",failedToGenerateThumbnails:"Failed to generate thumbnails: {{error}}",thumbnailGenerated:"Thumbnail generated",failedToGenerateThumbnail:"Failed to generate thumbnail: {{error}}"}},projects:{title:"Projects",subtitle:"Organize and track your 3D printing projects",newProject:"New Project",editProject:"Edit Project",deleteProject:"Delete Project",projectName:"Project Name",description:"Description",noProjects:"No projects yet",noProjectsFiltered:"No {{status}} projects",noProjectsFilteredHelp:"You don't have any {{status}} projects. Projects will appear here when their status changes.",createFirst:"Create your first project to start organizing related prints, tracking progress, and managing your builds.",createFirstButton:"Create Your First Project",create:"Create",files:"Files",prints:"Prints",plates:"plates",parts:"parts",lastModified:"Last Modified",deleteConfirm:"Are you sure you want to delete this project? Archives and queue items will be unlinked but not deleted.",addFiles:"Add Files",removeFile:"Remove File",viewDetails:"View Details",namePlaceholder:"e.g., Voron 2.4 Build",descriptionPlaceholder:"Optional description...",color:"Color",targetPlates:"Target Plates",targetPlatesPlaceholder:"e.g., 25",targetPlatesHelp:"Number of print jobs",targetParts:"Target Parts",targetPartsPlaceholder:"e.g., 150",targetPartsHelp:"Total objects needed",tagsLabel:"Tags (comma-separated)",tagsPlaceholder:"e.g., voron, functional, gift",dueDate:"Due Date",priority:"Priority",priorityLow:"Low",priorityNormal:"Normal",priorityHigh:"High",priorityUrgent:"Urgent",statusActive:"Active",statusCompleted:"Completed",statusArchived:"Archived",done:"Done",completed:"completed",failed:"failed",inQueue:"in queue",noPrintsYet:"No prints yet",printJobs:"Print jobs (plates)",partsPrinted:"Parts printed",failedParts:"Failed parts",import:"Import",export:"Export",importProject:"Import project",exportAll:"Export all projects",loading:"Loading projects...",noEditPermission:"You do not have permission to edit projects",noDeletePermission:"You do not have permission to delete projects",noCreatePermission:"You do not have permission to create projects",noImportPermission:"You do not have permission to import projects",noExportPermission:"You do not have permission to export projects",toast:{created:"Project created",updated:"Project updated",deleted:"Project deleted",imported:"Project imported",multipleImported:"{{count}} projects imported",importFailed:"Import failed",exported:"Projects exported (metadata only)"}},projectDetail:{notFound:"Project not found",backToProjects:"Back to Projects",export:"Export",exportProject:"Export project",noExportPermission:"You do not have permission to export projects",noEditPermission:"You do not have permission to edit projects",partOf:"Part of:",priorityLabel:"Priority:",noPrints:"No prints in this project yet",status:{active:"Active",completed:"Completed",archived:"Archived"},priority:{low:"Low",normal:"Normal",high:"High",urgent:"Urgent"},dueDate:{overdue:"Overdue",today:"Due today",daysLeft:"{{count}} days left"},progress:{platesProgress:"Plates Progress",partsProgress:"Parts Progress",printJobs:"print jobs",parts:"parts",percentComplete:"{{percent}}% complete",remaining:"{{count}} remaining"},stats:{printJobs:"Print Jobs",total:"total",failed:"{{count}} failed",partsPrinted:"{{count}} parts printed",printTime:"Print Time",filamentUsed:"Filament Used"},cost:{title:"Cost Tracking",filamentCost:"Filament Cost",energy:"Energy",totalCost:"Total Cost",total:"Total",includesBom:"incl. BOM",budget:"Budget",remaining:"Remaining"},subProjects:{title:"Sub-projects ({{count}})"},notes:{title:"Notes",noEditPermission:"You do not have permission to edit notes",placeholder:"Add notes about this project...",empty:"No notes yet. Click Edit to add notes."},files:{title:"Files",linkFolders:"Link folders from the File Manager",forQuickAccess:"to this project for quick access.",fileCount:"{{count}} file(s)",empty:"No folders linked. Go to File Manager and link a folder to this project.",noFiles:"No files in this folder.",print:"Print Now",addToQueue:"Add to Queue"},bom:{title:"Bill of Materials",acquired:"{{completed}}/{{total}} acquired",showAll:"Show all",hideDone:"Hide done",addPart:"Add Part",noAddPermission:"You do not have permission to add parts",partNamePlaceholder:"Part name (e.g., M3x8 screws)",partName:"Part name",qty:"Qty",price:"Price ({{currency}})",sourcingUrlPlaceholder:"Sourcing URL (optional)",remarksPlaceholder:"Remarks (optional)",deletePart:"Delete Part",deleteConfirm:'Are you sure you want to delete "{{name}}"?',noUpdatePermission:"You do not have permission to update parts",noEditPermission:"You do not have permission to edit parts",noDeletePermission:"You do not have permission to delete parts",totalCost:"Total cost:",empty:"No parts in the bill of materials. Add hardware, electronics, or other components to track what needs to be sourced."},timeline:{title:"Activity Timeline",empty:"No activity yet."},template:{saveAsTemplate:"Save as Template",noCreatePermission:"You do not have permission to create templates"},queue:{title:"Queue",viewAll:"View all",printing:"{{count}} printing",queued:"{{count}} queued"},prints:{title:"Prints ({{count}})"},toast:{projectUpdated:"Project updated",partAdded:"Part added",partRemoved:"Part removed",exportFailed:"Export failed",projectExported:"Project exported",templateCreated:"Template created"}},system:{title:"System Information",version:"Version",uptime:"Uptime",cpuUsage:"CPU Usage",memoryUsage:"Memory Usage",diskUsage:"Disk Usage",networkInfo:"Network Info",logs:"Logs",debugMode:"Debug Mode",enableDebug:"Enable Debug Logging",disableDebug:"Disable Debug Logging",downloadLogs:"Download Logs",clearLogs:"Clear Logs",dockerInfo:"Docker Info",containerName:"Container Name",imageName:"Image Name",platform:"Platform",architecture:"Architecture"},library:{title:"Filament Library",addFilament:"Add Filament",editFilament:"Edit Filament",deleteFilament:"Delete Filament",vendor:"Vendor",material:"Material",color:"Color",kFactor:"K Factor",temperature:"Temperature",noFilaments:"No filaments in library",deleteConfirm:"Are you sure you want to delete this filament?",importFromPrinter:"Import from Printer",exportToFile:"Export to File"},spoolman:{title:"Spoolman Integration",enabled:"Spoolman Enabled",url:"Spoolman URL",connected:"Connected",disconnected:"Not Connected",testConnection:"Test Connection",sync:"Sync",syncing:"Syncing...",lastSync:"Last Sync",linkToSpoolman:"Link to Spoolman",openInSpoolman:"Open in Spoolman",unlinkSpool:"Unlink Spool",unlinkConfirmTitle:"Unlink Spool?",unlinkConfirmMessage:"This will disconnect the spool from Spoolman. The spool data in Spoolman will remain unchanged.",selectSpool:"Select Spool",noUnlinkedSpools:"No unlinked spools available",linkSuccess:"Spool linked to Spoolman successfully",linkFailed:"Failed to link spool",unlinkSuccess:"Spool unlinked from Spoolman successfully",unlinkFailed:"Failed to unlink spool",spoolId:"Spool ID",fillSourceLabel:"(Spoolman)",weight:"Weight",remaining:"Remaining",disableWeightSync:"Disable AMS Estimated Weight Sync",disableWeightSyncDesc:"Don't update remaining capacity from AMS estimates. Use this if you prefer Spoolman's usage tracking over AMS percentage-based estimates. New spools will still use the AMS estimate as their initial weight.",reportPartialUsage:"Report Partial Usage for Failed Prints",reportPartialUsageDesc:"When a print fails or is cancelled, report the estimated filament used up to that point based on layer progress."},inventory:{title:"Spool Inventory",addSpool:"Add Spool",editSpool:"Edit Spool",material:"Material",selectMaterial:"Select material...",subtype:"Subtype",brand:"Brand",searchBrand:"Search brand...",useCustomBrand:'Use "{{brand}}"',useCustomMaterial:"Use custom material: {{material}}",colorName:"Color Name",colorNamePlaceholder:"Jade White, Fire Red...",color:"Color",hexColor:"Hex Color",pickColor:"Pick custom color",labelWeight:"Label Weight",coreWeight:"Empty Spool Weight",searchSpoolWeight:"Search spool weight...",weightUsed:"Used",currentWeight:"Remaining Weight",measuredWeight:"Measured Weight",spoolName:"Spool",costPerKg:"Cost per kg",measuredWeightError:"Measured weight must be between {{min}}g and {{max}}g.",slicerFilament:"Slicer Filament",slicerFilamentName:"Slicer Preset Name",slicerPreset:"Slicer Preset",searchPresets:"Search filament presets...",selectedPreset:"Selected",noPresetsFound:"No presets found",tempOverrides:"Temperature Overrides",note:"Note",notePlaceholder:"Any additional notes about this spool...",archive:"Archive",restore:"Restore",noSpools:"No spools yet. Add your first spool to get started.",noManualSpools:"No manually added spools available. Add a spool to your inventory first.",kProfiles:"K-Profiles",addKProfile:"Add K-Profile",assignSpool:"Assign Spool",unassignSpool:"Unassign",assignSuccess:"Spool assigned and AMS slot configured",assignFailed:"Failed to assign spool",selectSpool:"Select a spool to assign to this slot",assigned:"Assigned",assigning:"Assigning...",searchSpools:"Search spools...",showAllSpools:"Show all spools",allMaterials:"All Materials",filterByBrand:"Filter by brand...",showArchived:"Show archived",quickAdd:"Quick Add (Stock)",quantity:"Quantity",stock:"Stock",configured:"Configured",spoolsCreated:"{{count}} spools created",spoolCreated:"Spool created",spoolUpdated:"Spool updated",spoolDeleted:"Spool deleted",spoolArchived:"Spool archived",spoolRestored:"Spool restored",deleteConfirm:"Are you sure you want to delete this spool? This cannot be undone.",archiveConfirm:"Are you sure you want to archive this spool?",advancedSettings:"Advanced Settings",filamentInfoTab:"Filament Info",paProfileTab:"PA Profile",filamentInfo:"Filament",additional:"Additional",loadingPresets:"Loading cloud presets...",cloudConnected:"Cloud connected",cloudNotConnected:"Cloud not connected (using defaults)",recentColors:"Recent",searchColors:"Search colors...",searchResults:"Search results",allColors:"All colors",commonColors:"Common colors",showLess:"Show less",showAll:"Show all",noColorsFound:"No colors match your search",noResults:"No matches found",selectMaterialFirst:"Please select a material first in the Filament Info tab.",noPrintersConfigured:"No printers configured. Add printers to use PA profiles.",matchingFilter:"Matching",anyBrand:"Any brand",anyVariant:"Any variant",autoSelect:"Auto-select",matches:"matches",match:"match",noMatches:"No matches",connected:"Connected",offline:"Offline",printerOffline:"Printer is offline. Connect to view calibration profiles.",noKProfilesMatch:"No K-profiles match the selected filament.",leftNozzle:"Left Nozzle",rightNozzle:"Right Nozzle",profilesSelected:"calibration profile(s) selected",totalInventory:"Total Inventory",totalConsumed:"Total Consumed",byMaterial:"By Material",inPrinter:"In Printer",lowStock:"Low Stock",sinceTracking:"Since tracking started",loadedInAms:"Loaded in AMS/Ext",remaining:"Remaining",weightCheck:"Weight Check",lastWeighed:"Last weighed",neverWeighed:"Never weighed",search:"Search spools...",showing:"Showing",to:"to",of:"of",show:"Show",spools:"spools",spool:"spool",page:"Page",noSpoolsMatch:"No results found",noSpoolsMatchDesc:"Try adjusting your search or filters to find what you're looking for.",active:"Active",archived:"Archived",all:"All",used:"Used",new:"New",clearFilters:"Clear filters",table:"Table",cards:"Cards",net:"Net",groupSimilar:"Group",groupedSpools:"{{count}} identical spools",groupedRows:"rows",columns:"Columns",configureColumns:"Configure Columns",configureColumnsDesc:"Drag to reorder columns or use arrows. Toggle visibility with the eye icon.",visible:"visible",reset:"Reset",cancel:"Cancel",applyChanges:"Apply Changes",moveUp:"Move up",moveDown:"Move down",hideColumn:"Hide column",showColumn:"Show column",linkToSpool:"Link to Spool",tagLinked:"Tag linked to spool",tagLinkFailed:"Failed to link tag",tagAlreadyLinked:"Tag already linked to another spool",unknownTag:"Unknown RFID tag detected",usageHistory:"Usage History",noUsageHistory:"No usage recorded yet",printName:"Print Name",weightConsumed:"Weight Consumed",clearHistory:"Clear",historyCleared:"Usage history cleared",fillSourceLabel:"(Inv)",lowStockThresholdError:"Threshold must be between 0.1 and 99.9",assignMismatchTitle:"Material mismatch",assignMismatchMessage:'The selected spool material "{{spoolMaterial}}" does not match the tray material "{{trayMaterial}}" for {{location}}. Assign anyway?',assignMismatchConfirm:"Assign Anyway",assignPartialMismatchMessage:'The spool material "{{spoolMaterial}}" is similar to but not exactly matching "{{trayMaterial}}" in {{location}}. Do you want to proceed?',assignProfileMismatchMessage:'The spool profile "{{spoolProfile}}" does not match the tray profile "{{trayProfile}}" in {{location}}. Do you want to proceed?'},timelapse:{title:"Timelapse",create:"Create Timelapse",download:"Download",delete:"Delete",preview:"Preview",frameRate:"Frame Rate",quality:"Quality",processing:"Processing...",noTimelapses:"No timelapses available"},ams:{title:"AMS",slot:"Slot",empty:"Empty",emptySlot:"Empty slot",unknown:"Unknown",humidity:"Humidity",temperature:"Temperature",filamentType:"Filament Type",filamentColor:"Color",remaining:"Remaining",history:"AMS History",noHistory:"No history available",configureSlot:"Configure Slot",externalSpool:"External Spool",profile:"Profile",kFactor:"K Factor",fill:"Fill",configure:"Configure",used:"used",remainingUnit:"remaining"},printModal:{title:"Start Print",selectPrinter:"Select Printer",selectPlate:"Select Plate",filamentMapping:"Filament Mapping",totalCost:"Total cost:",slotRemainingShort:" - {{grams}}g left",printSettings:"Print Settings",bedLeveling:"Bed Leveling",flowCalibration:"Flow Calibration",vibrationCalibration:"Vibration Calibration",layerInspection:"First Layer Inspection",timelapse:"Timelapse",startPrint:"Start Print",addToQueue:"Add to Queue",cancel:"Cancel",noPrintersAvailable:"No printers available",printerBusy:"Printer is busy",printerOffline:"Printer is offline",sameTypeDifferentColor:"Same type, different color",filamentTypeNotLoaded:"Filament type not loaded",openCalendar:"Open calendar",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Left nozzle",rightNozzleTooltip:"Right nozzle",filamentOverride:"Filament Override",filamentOverrideHint:"Optionally override filaments for model-based assignment. The scheduler will match against your selected filaments instead of the original 3MF values.",originalFilament:"Original",overrideWith:"Override with",resetToOriginal:"Reset to original",insufficientFilamentTitle:"Not enough filament",insufficientFilamentMessage:"Some assigned spools have less filament remaining than this print needs:",insufficientFilamentLine:"{{printer}} - {{slot}}: needs {{required}}g, remaining {{remaining}}g",printAnyway:"Print anyway",forceColorMatch:"Force color match",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Stagger to {{count}} printers",gcodeInjection:"Inject auto-print G-code"},backup:{title:"Backup & Restore",createBackup:"Create Backup",restoreBackup:"Restore Backup",restoreDescription:"Replace all data from a backup file",downloadBackup:"Download Backup",uploadBackup:"Upload Backup",lastBackup:"Last Backup",autoBackup:"Auto Backup",backupNow:"Backup Now",restoreWarning:"Warning: Restoring a backup will overwrite all current data.",includeArchives:"Include Archives",includeSettings:"Include Settings",includeProfiles:"Include Profiles",backupSuccess:"Backup created successfully",restoreSuccess:"Backup restored successfully",backupFailed:"Backup failed",restoreFailed:"Restore failed",restoreNote:"Virtual Printer will be stopped during restore",githubBackup:"GitHub Backup",enabled:"Enabled",cloudLoginRequired:"Bambu Cloud login required. Sign in under Profiles → Cloud Profiles to enable GitHub backup.",cloudLoginRequiredShort:"Cloud login required",githubDescription:"Automatically sync your profiles to a private GitHub repository for backup and version history.",repositoryUrl:"Repository URL",personalAccessToken:"Personal Access Token",tokenSaved:"(saved)",enterNewToken:"Enter new token to update",tokenHint:"Fine-grained token with Contents read/write permission",branch:"Branch",manualOnly:"Manual only",hourly:"Hourly",daily:"Daily",weekly:"Weekly",includeInBackup:"Include in backup",kProfiles:"K-Profiles",kProfilesDescription:"Pressure advance calibration from connected printers",noPrintersConnected:"No printers connected",printersConnected:"{{connected}}/{{total}} connected",cloudProfiles:"Cloud Profiles",cloudProfilesDescription:"Filament, printer, and process presets from Bambu Cloud",appSettings:"App Settings",appSettingsDescription:"Bambuddy configuration (complete database)",spoolInventory:"Spool Inventory",spoolInventoryDescription:"Filament spools, usage history, and cost tracking",printArchives:"Print Archives",printArchivesDescription:"Print history metadata (no gcode/3MF files)",lastBackupAt:"Last backup:",noBackupsYet:"No backups yet",next:"Next:",startingBackup:"Starting backup...",test:"Test",enableBackup:"Enable Backup",testConnection:"Test Connection",enterRepoUrl:"Enter repository URL",enterRepoAndToken:"Enter repository URL and access token",repoRequired:"Repository URL is required",tokenRequired:"Access token is required",githubBackupEnabled:"GitHub backup enabled",tokenUpdated:"Token updated",settingsSaved:"Settings saved",failedToSave:"Failed to save: {{message}}",backupCompleteFiles:"Backup complete - {{count}} files updated",backupSkippedNoChanges:"Backup skipped - no changes",backupFailed2:"Backup failed: {{message}}",clearedLogs:"Cleared {{count}} logs",failedToClearLogs:"Failed to clear logs: {{message}}",history:"History",clear:"Clear",date:"Date",status:"Status",commit:"Commit",localBackup:"Local Backup",localBackupDescription:"Create a complete backup of your Bambuddy data including the database, archives, uploads, and all files.",downloadBackupLabel:"Download Backup",completeBackupZip:"Complete backup: database + all files (ZIP)",download:"Download",preparingBackup:"Preparing backup...",creatingArchive:"Creating backup archive... This may take a while for large archives.",downloadingFile:"Downloading backup file...",backupDownloaded:"Backup downloaded successfully",failedToCreateBackup:"Failed to create backup: {{message}}",restore:"Restore",restoreReplacesAll:"Restore replaces all data.",restoreReplacesAllDetail:"Your current database and files will be completely replaced. A restart is required after restore.",restoreConfirmTitle:"Restore Backup",restoreConfirmMessage:'Are you sure you want to restore from "{{filename}}"? This will completely replace your current database and all files. The application will need to be restarted after restore.',restoreConfirmButton:"Restore Backup",uploadingFile:"Uploading backup file...",backupRestoredRestart:"Backup restored. Please restart Bambuddy.",failedToRestore:"Failed to restore backup. Please check the file format.",reloadNow:"Reload Now",creatingBackup:"Creating Backup",restoringBackup:"Restoring Backup",preparing:"Preparing...",processing:"Processing...",doNotClosePage:"Please do not close this page or navigate away. This operation may take several minutes for large backups.",restoring:"Restoring...",restoreComplete:"Restore Complete",restoreFailed2:"Restore Failed",importSettings:"Import settings from a backup file",pleaseWaitRestoring:"Please wait while your data is being restored",selectBackupFile:"Click to select backup file (.json or .zip)",duplicateHandling:"How duplicate handling works:",matchPrinters:"Printers",matchPrintersBy:"matched by serial number",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"matched by IP address",matchNotificationProviders:"Notification Providers",matchNotificationProvidersBy:"matched by name",matchFilaments:"Filaments",matchFilamentsBy:"matched by name + type + brand",matchArchives:"Archives",matchArchivesBy:"matched by content hash (always skipped)",matchPendingUploads:"Pending Uploads",matchPendingUploadsBy:"matched by filename",matchSettingsTemplates:"Settings & Templates",matchSettingsTemplatesBy:"always overwritten",replaceExisting:"Replace existing data",keepExisting:"Keep existing data",overwriteDescription:"Overwrite items that already exist with backup data",keepDescription:"Only restore items that don't already exist",overwriteCaution:"Caution:",overwriteWarning:"Overwriting will replace your current configurations with data from the backup. Printer access codes are never overwritten for security.",cancel:"Cancel",processingBackup:"Processing backup file...",itemsRestored:"Items Restored",itemsSkipped:"Items Skipped",restored:"Restored",skippedAlreadyExist:"Skipped (already exist)",filesCategory:"Files (3MF, thumbnails, etc.)",andMore:"...and {{count}} more",newApiKeysGenerated:"New API Keys Generated",keysShownOnce:"These keys are only shown once. Copy them now!",copy:"Copy",noDataFound:"No data was found to restore in the backup file.",close:"Close",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Settings",notification_providers:"Notification Providers",notification_templates:"Notification Templates",smart_plugs:"Smart Plugs",printers:"Printers",filaments:"Filaments",maintenance_types:"Maintenance Types",archives:"Archives",projects:"Projects",pending_uploads:"Pending Uploads",external_links:"External Links",api_keys:"API Keys"}},tags:{title:"Tags",addTag:"Add Tag",editTag:"Edit Tag",deleteTag:"Delete Tag",tagName:"Tag Name",tagColor:"Tag Color",noTags:"No tags",deleteConfirm:"Are you sure you want to delete this tag?",manageTags:"Manage Tags"},uploadModal:{title:"Upload 3MF Files",dragDrop:"Drag & drop .3mf files here",or:"or",browseFiles:"Browse Files",extractionInfo:"The printer model will be automatically extracted from the 3MF file metadata.",uploaded:"uploaded",failed:"failed",uploading:"Uploading...",upload:"Upload",uploadFailed:"Upload failed"},editArchive:{title:"Edit Archive",name:"Name",namePlaceholder:"Print name",printer:"Printer",noPrinter:"No printer",project:"Project",noProject:"No project",itemsPrinted:"Items Printed",itemsPrintedHelp:"Number of items produced in this print job",notes:"Notes",notesPlaceholder:"Add notes about this print...",externalLink:"External Link",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link to Printables, Thingiverse, or other source",tags:"Tags",tagsPlaceholder:"Add tags...",addMoreTags:"Add more tags...",matchingTags:'Matching "{{query}}"',existingTags:"Existing tags",clickToAdd:"(click to add)",status:"Status",failureReason:"Failure Reason",selectReason:"Select reason...",photos:"Photos of Printed Result",photosHelp:"Click + to add photos of your printed result",printResult:"Print result",saving:"Saving...",failureReasons:{adhesionFailure:"Adhesion failure",spaghettiDetached:"Spaghetti / Detached",layerShift:"Layer shift",cloggedNozzle:"Clogged nozzle",filamentRunout:"Filament runout",warping:"Warping",stringing:"Stringing",underExtrusion:"Under-extrusion",powerFailure:"Power failure",userCancelled:"User cancelled",other:"Other"},statuses:{completed:"Completed",failed:"Failed",aborted:"Cancelled",printing:"Printing"}},kProfiles:{title:"K-Profiles",noPrintersConfigured:"No Printers Configured",addPrinterInSettings:"Add a printer in Settings to manage K-profiles",noActivePrinters:"No Active Printers",enablePrinterConnection:"Enable a printer connection to view its K-profiles",loadingProfiles:"Loading K-Profiles...",printerOffline:"Printer Offline",printerOfflineDesc:"The selected printer is not connected. Power it on to view K-profiles.",noMatchingProfiles:"No Matching Profiles",noMatchingProfilesDesc:"No profiles match your search criteria",noKProfiles:"No K-Profiles",noKProfilesDesc:"No pressure advance profiles found for {{diameter}}mm nozzle",createFirstProfile:"Create First Profile",printer:"Printer",nozzle:"Nozzle",refresh:"Refresh",addProfile:"Add Profile",export:"Export",import:"Import",select:"Select",selectAll:"Select All",delete:"Delete",searchPlaceholder:"Search by name or filament...",allExtruders:"All Extruders",leftOnly:"Left Only",rightOnly:"Right Only",allFlow:"All Flow",hfOnly:"HF Only",sOnly:"S Only",sortName:"Sort: Name",sortKValue:"Sort: K-Value",sortFilament:"Sort: Filament",leftExtruder:"Left Extruder",rightExtruder:"Right Extruder",modal:{addTitle:"Add K-Profile",editTitle:"Edit K-Profile",profileName:"Profile Name",profileNamePlaceholder:"My PLA Profile",kValue:"K-Value",kValuePlaceholder:"0.020",kValueHelp:"Typical range: 0.01 - 0.06 for PLA, 0.02 - 0.10 for PETG",filament:"Filament",selectFilament:"Select filament...",noFilamentsHelp:"No filaments found. Create a K-profile in Bambu Studio first.",flowType:"Flow Type",highFlow:"High Flow",standard:"Standard",nozzleSize:"Nozzle Size",extruder:"Extruder",extruders:"Extruders",left:"Left",right:"Right",notes:"Notes (stored locally)",notesPlaceholder:"Add notes about this profile...",notesHelp:"Notes are saved in Bambuddy, not on the printer",syncing:"Syncing with printer...",savingExtruder:"Saving to extruder {{current}}/{{total}}...",pleaseWait:"Please wait"},deleteConfirm:{title:"Delete Profile",cannotUndo:"This cannot be undone",message:'Are you sure you want to delete "{{name}}" from the printer?'},bulkDelete:{title:"Delete Profiles",cannotUndo:"This cannot be undone",message:"Are you sure you want to delete {{count}} selected profiles from the printer?"},toast:{profileSaved:"K-profile saved",profilesSaved:"K-profile saved to {{count}} extruders",selectAtLeastOneExtruder:"Please select at least one extruder",profileDeleted:"K-profile deleted",profilesDeleted:"Deleted {{count}} profiles",exportedProfiles:"Exported {{count}} profiles",importedProfiles:"Imported {{count}} of {{total}} profiles",noProfilesToExport:"No profiles to export",invalidFileFormat:"Invalid file format",failedToParseImport:"Failed to parse import file",failedToSaveBatch:"Failed to save K-profiles",noteSaved:"Note saved",failedToSaveNote:"Failed to save note"},permission:{noRead:"You do not have permission to refresh profiles",noCreate:"You do not have permission to add profiles",noUpdate:"You do not have permission to update K-profiles",noDelete:"You do not have permission to delete K-profiles",noExport:"You do not have permission to export profiles",noImport:"You do not have permission to import profiles"}},virtualPrinter:{title:"Virtual Printer",running:"Running",stopped:"Stopped",description:{default:"Enable a virtual printer that appears in Bambu Studio and OrcaSlicer. Files sent to this printer will be archived directly without printing.",proxy:"Enable a proxy that relays slicer traffic to a real printer, allowing remote printing over any network."},enable:{title:"Enable Virtual Printer",visibleInSlicer:'Visible as "Bambuddy" in slicer discovery',proxyingTo:"Proxying to {{name}}",notActive:"Not active"},model:{title:"Printer Model",description:"Select which printer model to emulate.",restartWarning:"Changing the model will restart the virtual printer"},accessCode:{title:"Access Code",isSet:"Access code is set",notSet:"No access code set - required to enable",placeholder:"Enter 8-char code",placeholderChange:"Enter new code to change",hint:"Must be exactly 8 characters. Used by slicers to authenticate.",charCount:"({{count}}/8)"},targetPrinter:{title:"Target Printer",configured:"Proxy target configured",notConfigured:"No target printer selected - required for proxy mode",placeholder:"Select a printer...",hint:"Select the printer to proxy slicer traffic to. The printer must be in LAN mode.",noPrinters:"No printers configured. Add a printer first to use proxy mode."},remoteInterface:{title:"Network Interface Override",configured:"Interface override active",optional:"Optional - use if auto-detected IP is wrong (e.g. multiple NICs, Docker, VPN)",placeholder:"Auto-detect (default)...",hint:"Override the IP address advertised via SSDP and used in the TLS certificate. Useful when Bambuddy has multiple network interfaces."},mode:{title:"Mode",archive:"Archive",archiveDesc:"Archive files immediately",review:"Review",reviewDesc:"Review before archiving",queue:"Queue",queueDesc:"Archive and add to queue",proxy:"Proxy",proxyDesc:"Relay to real printer"},autoDispatch:{title:"Auto-dispatch",description:"Automatically start prints when added to queue. When off, prints wait for manual dispatch."},setupRequired:{title:"Setup Required",description:"The virtual printer feature requires additional system configuration before it will work. This includes port forwarding, firewall rules, and platform-specific settings.",readGuide:"Read the setup guide before enabling"},howItWorks:{title:"How it works",step1:"On the same LAN, virtual printers appear in your slicer (Bambu Studio / OrcaSlicer) automatically via discovery. From other networks, add them manually by IP address and access code.",step2:'In Archive, Review, and Queue modes, use the "Send" button in your slicer to upload 3MF files to Bambuddy. The slicer will show "Print success" — the file is stored, not printed.',step3:"In Proxy mode, the virtual printer relays all traffic to a real printer — prints start immediately as if connected directly."},status:{title:"Status Details",printerName:"Printer Name",model:"Model",serialNumber:"Serial Number",mode:"Mode",pendingFiles:"Pending Files",targetPrinter:"Target Printer",ftpPort:"FTP Port",mqttPort:"MQTT Port",ftpConnections:"FTP Connections",mqttConnections:"MQTT Connections"},toast:{updated:"Virtual printer settings updated",failedToUpdate:"Failed to update settings",accessCodeRequired:"Please set an access code first",targetPrinterRequired:"Please select a target printer first",bindIpRequired:"Please set a bind IP first",accessCodeEmpty:"Access code cannot be empty",accessCodeLength:"Access code must be exactly 8 characters",created:"Virtual printer created",failedToCreate:"Failed to create virtual printer",deleted:"Virtual printer deleted",failedToDelete:"Failed to delete virtual printer"},list:{title:"Virtual Printers",add:"Add",addFirst:"Add Virtual Printer",empty:"No virtual printers configured. Add one to get started."},bindIp:{title:"Bind Interface",placeholder:"Select interface...",hint:"Network interface for this virtual printer to bind to. Must be unique per printer."},proxy:{accessCodeHint:"In proxy mode, use your target printer's access code in the slicer. The connection is forwarded transparently to the real printer."},addDialog:{title:"Add Virtual Printer",name:"Name",hint:"You can configure access code, target printer, and other settings after creating.",create:"Create"},deleteConfirm:{title:"Delete Virtual Printer",message:'Are you sure you want to delete "{{name}}"? This will stop all services for this printer.'}},modelViewer:{openInSlicer:"Open in Slicer",tabs:{model:"3D Model",gcode:"G-code Preview"},notAvailable:"not available",notSliced:"not sliced",plates:"Plates",allPlates:"All Plates",plateNumber:"Plate {{number}}",plateCount:"{{count}} plate",plateCount_other:"{{count}} plates",objectCount:"{{count}} object",objectCount_other:"{{count}} objects",filamentCount:"{{count}} filament",filamentCount_other:"{{count}} filaments",eta:"ETA {{minutes}} min",noPreview:"No preview available for this file",pagination:{pageOf:"Page {{current}} of {{total}}",prev:"Prev",next:"Next"},errors:{failedToLoad:"Failed to load file",noMeshes:"No meshes found in 3MF file",unsupportedFormat:"Unsupported file format"}},maintenanceDescriptions:{lubricateCarbonRods:"Apply lubricant to carbon rods for smooth motion",lubricateRails:"Apply lubricant to linear rails for smooth motion",cleanNozzle:"Clean hotend and nozzle to prevent clogs",checkBelts:"Verify belt tension for accurate prints",cleanBuildPlate:"Clean build plate for better adhesion",checkExtruder:"Inspect extruder gears for wear",checkCooling:"Ensure cooling fans are working properly",generalInspection:"General printer inspection",cleanCarbonRods:"Clean carbon rods to reduce friction",lubricateSteelRods:"Apply lubricant to steel rods for smooth motion",cleanSteelRods:"Clean steel rods to reduce friction",cleanLinearRails:"Wipe linear rails to remove dust and debris",checkPtfeTube:"Inspect PTFE tube for wear or damage",replaceHepaFilter:"Replace HEPA filter for air quality",replaceCarbonFilter:"Replace activated carbon filter",lubricateLeftNozzleRail:"Lubricate left nozzle rail (H2 series)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Open plug admin page",deleteSmartPlug:"Delete Smart Plug",turnOnSmartPlug:"Turn On Smart Plug",turnOffSmartPlug:"Turn Off Smart Plug",turnOn:"Turn On",turnOff:"Turn Off",addSmartPlug:{scanningNetwork:"Scanning network...",chooseEntity:"Choose an entity...",connectionFailed:"Connection failed",searchEntities:"Search entities...",searchPowerSensors:"Search power sensors...",searchEnergySensors:"Search energy sensors...",placeholders:{plugName:"Living Room Plug",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Same as power topic, or different"}},linkedTo:"Linked to:",monitorOnly:"Monitor Only",alerts:"Alerts",scheduleOn:"On {{time}}",scheduleOff:"Off {{time}}",on:"On",off:"Off",power:"Power",kwhToday:"kWh Today",settings:"Settings",automationSettings:"Automation Settings",showInSwitchbar:"Show in Switchbar",quickAccessSidebar:"Quick access from sidebar",enabled:"Enabled",enableAutomation:"Enable automation for this plug",autoOn:"Auto On",autoOnDescription:"Turn on when print starts",autoOff:"Auto Off",autoOffDescription:"Turn off when print completes (one-shot)",autoOffPersistent:"Keep Enabled",autoOffPersistentDescription:"Stay enabled between prints instead of one-shot",turnOffDelayMode:"Turn Off Delay Mode",time:"Time",temp:"Temp",delayMinutes:"Delay (minutes)",tempThreshold:"Temperature threshold (°C)",tempThresholdDescription:"Turns off when nozzle cools below this temperature",edit:"Edit",deleteConfirm:'Are you sure you want to delete "{{name}}"? This cannot be undone.',turnOnConfirm:'Are you sure you want to turn on "{{name}}"?',turnOffConfirm:'Are you sure you want to turn off "{{name}}"? This will cut power to the connected device.',failedToTurn:'Failed to turn {{action}} "{{name}}"',unknown:"Unknown",addTitle:"Add Smart Plug",editTitle:"Edit Smart Plug",stopScanning:"Stop Scanning",discoverTasmota:"Discover Tasmota Devices",foundDevices:"Found {{count}} device(s) - click to select:",noDevicesFound:"No Tasmota devices found on your network",haNotConfigured:"Home Assistant is not configured. Set it up in",haSettingsPath:"Settings → Network → Home Assistant",selectEntity:"Select Entity *",ipAddress:"IP Address *",nameLabel:"Name *",username:"Username",password:"Password",authHint:"Leave empty if your Tasmota device doesn't require authentication",linkToPrinter:"Link to Printer",noPrinter:"No printer (manual control only)",linkingDescription:"Linking enables automatic on/off when prints start/complete",powerAlerts:"Power Alerts",alertAbove:"Alert if above (W)",alertBelow:"Alert if below (W)",alertDescription:"Get notified when power consumption crosses these thresholds. Leave empty to disable that direction.",dailySchedule:"Daily Schedule",turnOnAt:"Turn On at",turnOffAt:"Turn Off at",scheduleDescription:"Automatically turn the plug on/off at these times daily. Leave empty to skip that action.",showOnPrinterCard:"Show on Printer Card",displayOnPrinterCard:"Display button on printer card",connectedResult:"Connected!",deviceLabel:"Device: {{name}} - ",stateLabel:"State: {{state}}",test:"Test",delete:"Delete",save:"Save",add:"Add",cancel:"Cancel",failedToStartScan:"Failed to start scan",nameRequired:"Name is required",entityRequired:"Entity is required for Home Assistant plugs",mqttTopicRequired:"At least one MQTT topic must be configured for power, energy, or state monitoring",loadingEntities:"Loading entities...",loading:"Loading...",failedToLoadEntities:"Failed to load entities: {{error}}",noEntitiesMatching:'No entities found matching "{{search}}"',noEntitiesAvailable:"No entities available",searchingEntities:"Searching all entities ({{count}} found)",showingEntities:"Showing switch, light, input_boolean ({{count}} available)",energyMonitoringOptional:"Energy Monitoring (Optional)",energyMonitoringHint:"Search and select sensors that provide power/energy data.",powerSensorW:"Power Sensor (W)",energyTodayKwh:"Energy Today (kWh)",totalEnergyKwh:"Total Energy (kWh)",noMatchingSensors:"No matching sensors",none:"None",mqttNotConfigured:"MQTT broker not configured. Set broker address in",mqttSettingsPath:"Settings → Network → MQTT Publishing",mqttNotConfiguredSuffix:"(you don't need to enable publishing, just fill in the broker details).",mqttMonitorOnlyDescription:"MQTT plugs receive power/energy data via MQTT subscription. On/off control is not available - use your MQTT broker or home automation system.",powerMonitoring:"Power Monitoring",energyMonitoring:"Energy Monitoring",stateMonitoring:"State Monitoring",optional:"optional",topic:"Topic",jsonPath:"JSON Path",multiplier:"Multiplier",onValue:"ON Value",mqttPowerHint:`JSON path extracts value from JSON payload (e.g., "power_l1"). Leave empty if topic publishes raw numeric values. +`+M.stack}}var se=Object.prototype.hasOwnProperty,ge=t.unstable_scheduleCallback,fe=t.unstable_cancelCallback,de=t.unstable_shouldYield,U=t.unstable_requestPaint,R=t.unstable_now,re=t.unstable_getCurrentPriorityLevel,_e=t.unstable_ImmediatePriority,Se=t.unstable_UserBlockingPriority,ye=t.unstable_NormalPriority,Te=t.unstable_LowPriority,be=t.unstable_IdlePriority,Ae=t.log,Le=t.unstable_setDisableYieldValue,Me=null,Fe=null;function Re(h){if(typeof Ae=="function"&&Le(h),Fe&&typeof Fe.setStrictMode=="function")try{Fe.setStrictMode(Me,h)}catch{}}var qe=Math.clz32?Math.clz32:ae,Ye=Math.log,nt=Math.LN2;function ae(h){return h>>>=0,h===0?32:31-(Ye(h)/nt|0)|0}var ze=256,we=262144,Ve=4194304;function je(h){var y=h&42;if(y!==0)return y;switch(h&-h){case 1:return 1;case 2:return 2;case 4:return 4;case 8:return 8;case 16:return 16;case 32:return 32;case 64:return 64;case 128:return 128;case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:return h&261888;case 262144:case 524288:case 1048576:case 2097152:return h&3932160;case 4194304:case 8388608:case 16777216:case 33554432:return h&62914560;case 67108864:return 67108864;case 134217728:return 134217728;case 268435456:return 268435456;case 536870912:return 536870912;case 1073741824:return 0;default:return h}}function me(h,y,S){var M=h.pendingLanes;if(M===0)return 0;var q=0,Z=h.suspendedLanes,Ne=h.pingedLanes;h=h.warmLanes;var He=M&134217727;return He!==0?(M=He&~Z,M!==0?q=je(M):(Ne&=He,Ne!==0?q=je(Ne):S||(S=He&~h,S!==0&&(q=je(S))))):(He=M&~Z,He!==0?q=je(He):Ne!==0?q=je(Ne):S||(S=M&~h,S!==0&&(q=je(S)))),q===0?0:y!==0&&y!==q&&(y&Z)===0&&(Z=q&-q,S=y&-y,Z>=S||Z===32&&(S&4194048)!==0)?y:q}function ve(h,y){return(h.pendingLanes&~(h.suspendedLanes&~h.pingedLanes)&y)===0}function Be(h,y){switch(h){case 1:case 2:case 4:case 8:case 64:return y+250;case 16:case 32:case 128:case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:case 262144:case 524288:case 1048576:case 2097152:return y+5e3;case 4194304:case 8388608:case 16777216:case 33554432:return-1;case 67108864:case 134217728:case 268435456:case 536870912:case 1073741824:return-1;default:return-1}}function Ze(){var h=Ve;return Ve<<=1,(Ve&62914560)===0&&(Ve=4194304),h}function mt(h){for(var y=[],S=0;31>S;S++)y.push(h);return y}function gt(h,y){h.pendingLanes|=y,y!==268435456&&(h.suspendedLanes=0,h.pingedLanes=0,h.warmLanes=0)}function xt(h,y,S,M,q,Z){var Ne=h.pendingLanes;h.pendingLanes=S,h.suspendedLanes=0,h.pingedLanes=0,h.warmLanes=0,h.expiredLanes&=S,h.entangledLanes&=S,h.errorRecoveryDisabledLanes&=S,h.shellSuspendCounter=0;var He=h.entanglements,rt=h.expirationTimes,kt=h.hiddenUpdates;for(S=Ne&~S;0"u")return null;try{return h.activeElement||h.body}catch{return h.body}}var Mr=/[\n"\\]/g;function En(h){return h.replace(Mr,function(y){return"\\"+y.charCodeAt(0).toString(16)+" "})}function ja(h,y,S,M,q,Z,Ne,He){h.name="",Ne!=null&&typeof Ne!="function"&&typeof Ne!="symbol"&&typeof Ne!="boolean"?h.type=Ne:h.removeAttribute("type"),y!=null?Ne==="number"?(y===0&&h.value===""||h.value!=y)&&(h.value=""+zn(y)):h.value!==""+zn(y)&&(h.value=""+zn(y)):Ne!=="submit"&&Ne!=="reset"||h.removeAttribute("value"),y!=null?na(h,Ne,zn(y)):S!=null?na(h,Ne,zn(S)):M!=null&&h.removeAttribute("value"),q==null&&Z!=null&&(h.defaultChecked=!!Z),q!=null&&(h.checked=q&&typeof q!="function"&&typeof q!="symbol"),He!=null&&typeof He!="function"&&typeof He!="symbol"&&typeof He!="boolean"?h.name=""+zn(He):h.removeAttribute("name")}function Pn(h,y,S,M,q,Z,Ne,He){if(Z!=null&&typeof Z!="function"&&typeof Z!="symbol"&&typeof Z!="boolean"&&(h.type=Z),y!=null||S!=null){if(!(Z!=="submit"&&Z!=="reset"||y!=null)){bn(h);return}S=S!=null?""+zn(S):"",y=y!=null?""+zn(y):S,He||y===h.value||(h.value=y),h.defaultValue=y}M=M??q,M=typeof M!="function"&&typeof M!="symbol"&&!!M,h.checked=He?h.checked:!!M,h.defaultChecked=!!M,Ne!=null&&typeof Ne!="function"&&typeof Ne!="symbol"&&typeof Ne!="boolean"&&(h.name=Ne),bn(h)}function na(h,y,S){y==="number"&&hr(h.ownerDocument)===h||h.defaultValue===""+S||(h.defaultValue=""+S)}function Bn(h,y,S,M){if(h=h.options,y){y={};for(var q=0;q"u"||typeof window.document>"u"||typeof window.document.createElement>"u"),Em=!1;if(Bs)try{var Hs={};Object.defineProperty(Hs,"passive",{get:function(){Em=!0}}),window.addEventListener("test",Hs,Hs),window.removeEventListener("test",Hs,Hs)}catch{Em=!1}var Bo=null,fc=null,ed=null;function mo(){if(ed)return ed;var h,y=fc,S=y.length,M,q="value"in Bo?Bo.value:Bo.textContent,Z=q.length;for(h=0;h=en),Ja=" ",Yi=!1;function Sl(h,y){switch(h){case"keyup":return ua.indexOf(y.keyCode)!==-1;case"keydown":return y.keyCode!==229;case"keypress":case"mousedown":case"focusout":return!0;default:return!1}}function Ho(h){return h=h.detail,typeof h=="object"&&"data"in h?h.data:null}var qr=!1;function Qi(h,y){switch(h){case"compositionend":return Ho(y);case"keypress":return y.which!==32?null:(Yi=!0,Ja);case"textInput":return h=y.data,h===Ja&&Yi?null:h;default:return null}}function vc(h,y){if(qr)return h==="compositionend"||!ga&&Sl(h,y)?(h=mo(),ed=fc=Bo=null,qr=!1,h):null;switch(h){case"paste":return null;case"keypress":if(!(y.ctrlKey||y.altKey||y.metaKey)||y.ctrlKey&&y.altKey){if(y.char&&1=y)return{node:S,offset:y-h};h=M}e:{for(;S;){if(S.nextSibling){S=S.nextSibling;break e}S=S.parentNode}S=void 0}S=m5(S)}}function p5(h,y){return h&&y?h===y?!0:h&&h.nodeType===3?!1:y&&y.nodeType===3?p5(h,y.parentNode):"contains"in h?h.contains(y):h.compareDocumentPosition?!!(h.compareDocumentPosition(y)&16):!1:!1}function f5(h){h=h!=null&&h.ownerDocument!=null&&h.ownerDocument.defaultView!=null?h.ownerDocument.defaultView:window;for(var y=hr(h.document);y instanceof h.HTMLIFrameElement;){try{var S=typeof y.contentWindow.location.href=="string"}catch{S=!1}if(S)h=y.contentWindow;else break;y=hr(h.document)}return y}function xA(h){var y=h&&h.nodeName&&h.nodeName.toLowerCase();return y&&(y==="input"&&(h.type==="text"||h.type==="search"||h.type==="tel"||h.type==="url"||h.type==="password")||y==="textarea"||h.contentEditable==="true")}var mce=Bs&&"documentMode"in document&&11>=document.documentMode,Og=null,yA=null,By=null,vA=!1;function g5(h,y,S){var M=S.window===S?S.document:S.nodeType===9?S:S.ownerDocument;vA||Og==null||Og!==hr(M)||(M=Og,"selectionStart"in M&&xA(M)?M={start:M.selectionStart,end:M.selectionEnd}:(M=(M.ownerDocument&&M.ownerDocument.defaultView||window).getSelection(),M={anchorNode:M.anchorNode,anchorOffset:M.anchorOffset,focusNode:M.focusNode,focusOffset:M.focusOffset}),By&&Uy(By,M)||(By=M,M=N_(yA,"onSelect"),0>=Ne,q-=Ne,sd=1<<32-qe(y)+q|S<Qn?(xr=xn,xn=null):xr=xn.sibling;var Pr=Ct(ft,xn,_t[Qn],zt);if(Pr===null){xn===null&&(xn=xr);break}h&&xn&&Pr.alternate===null&&y(ft,xn),dt=Z(Pr,dt,Qn),Cr===null?Cn=Pr:Cr.sibling=Pr,Cr=Pr,xn=xr}if(Qn===_t.length)return S(ft,xn),vr&&ru(ft,Qn),Cn;if(xn===null){for(;Qn<_t.length;Qn++)xn=Ut(ft,_t[Qn],zt),xn!==null&&(dt=Z(xn,dt,Qn),Cr===null?Cn=xn:Cr.sibling=xn,Cr=xn);return vr&&ru(ft,Qn),Cn}for(xn=M(xn);Qn<_t.length;Qn++)xr=Dt(xn,ft,Qn,_t[Qn],zt),xr!==null&&(h&&xr.alternate!==null&&xn.delete(xr.key===null?Qn:xr.key),dt=Z(xr,dt,Qn),Cr===null?Cn=xr:Cr.sibling=xr,Cr=xr);return h&&xn.forEach(function(th){return y(ft,th)}),vr&&ru(ft,Qn),Cn}function Rn(ft,dt,_t,zt){if(_t==null)throw Error(r(151));for(var Cn=null,Cr=null,xn=dt,Qn=dt=0,xr=null,Pr=_t.next();xn!==null&&!Pr.done;Qn++,Pr=_t.next()){xn.index>Qn?(xr=xn,xn=null):xr=xn.sibling;var th=Ct(ft,xn,Pr.value,zt);if(th===null){xn===null&&(xn=xr);break}h&&xn&&th.alternate===null&&y(ft,xn),dt=Z(th,dt,Qn),Cr===null?Cn=th:Cr.sibling=th,Cr=th,xn=xr}if(Pr.done)return S(ft,xn),vr&&ru(ft,Qn),Cn;if(xn===null){for(;!Pr.done;Qn++,Pr=_t.next())Pr=Ut(ft,Pr.value,zt),Pr!==null&&(dt=Z(Pr,dt,Qn),Cr===null?Cn=Pr:Cr.sibling=Pr,Cr=Pr);return vr&&ru(ft,Qn),Cn}for(xn=M(xn);!Pr.done;Qn++,Pr=_t.next())Pr=Dt(xn,ft,Qn,Pr.value,zt),Pr!==null&&(h&&Pr.alternate!==null&&xn.delete(Pr.key===null?Qn:Pr.key),dt=Z(Pr,dt,Qn),Cr===null?Cn=Pr:Cr.sibling=Pr,Cr=Pr);return h&&xn.forEach(function(Ede){return y(ft,Ede)}),vr&&ru(ft,Qn),Cn}function Wr(ft,dt,_t,zt){if(typeof _t=="object"&&_t!==null&&_t.type===v&&_t.key===null&&(_t=_t.props.children),typeof _t=="object"&&_t!==null){switch(_t.$$typeof){case f:e:{for(var Cn=_t.key;dt!==null;){if(dt.key===Cn){if(Cn=_t.type,Cn===v){if(dt.tag===7){S(ft,dt.sibling),zt=q(dt,_t.props.children),zt.return=ft,ft=zt;break e}}else if(dt.elementType===Cn||typeof Cn=="object"&&Cn!==null&&Cn.$$typeof===F&&qp(Cn)===dt.type){S(ft,dt.sibling),zt=q(dt,_t.props),Wy(zt,_t),zt.return=ft,ft=zt;break e}S(ft,dt);break}else y(ft,dt);dt=dt.sibling}_t.type===v?(zt=Ip(_t.props.children,ft.mode,zt,_t.key),zt.return=ft,ft=zt):(zt=HS(_t.type,_t.key,_t.props,null,ft.mode,zt),Wy(zt,_t),zt.return=ft,ft=zt)}return Ne(ft);case x:e:{for(Cn=_t.key;dt!==null;){if(dt.key===Cn)if(dt.tag===4&&dt.stateNode.containerInfo===_t.containerInfo&&dt.stateNode.implementation===_t.implementation){S(ft,dt.sibling),zt=q(dt,_t.children||[]),zt.return=ft,ft=zt;break e}else{S(ft,dt);break}else y(ft,dt);dt=dt.sibling}zt=PA(_t,ft.mode,zt),zt.return=ft,ft=zt}return Ne(ft);case F:return _t=qp(_t),Wr(ft,dt,_t,zt)}if(te(_t))return pn(ft,dt,_t,zt);if(z(_t)){if(Cn=z(_t),typeof Cn!="function")throw Error(r(150));return _t=Cn.call(_t),Rn(ft,dt,_t,zt)}if(typeof _t.then=="function")return Wr(ft,dt,XS(_t),zt);if(_t.$$typeof===C)return Wr(ft,dt,VS(ft,_t),zt);YS(ft,_t)}return typeof _t=="string"&&_t!==""||typeof _t=="number"||typeof _t=="bigint"?(_t=""+_t,dt!==null&&dt.tag===6?(S(ft,dt.sibling),zt=q(dt,_t),zt.return=ft,ft=zt):(S(ft,dt),zt=CA(_t,ft.mode,zt),zt.return=ft,ft=zt),Ne(ft)):S(ft,dt)}return function(ft,dt,_t,zt){try{Gy=0;var Cn=Wr(ft,dt,_t,zt);return Kg=null,Cn}catch(xn){if(xn===Wg||xn===WS)throw xn;var Cr=$o(29,xn,null,ft.mode);return Cr.lanes=zt,Cr.return=ft,Cr}}}var Vp=z5(!0),U5=z5(!1),Im=!1;function zA(h){h.updateQueue={baseState:h.memoizedState,firstBaseUpdate:null,lastBaseUpdate:null,shared:{pending:null,lanes:0,hiddenCallbacks:null},callbacks:null}}function UA(h,y){h=h.updateQueue,y.updateQueue===h&&(y.updateQueue={baseState:h.baseState,firstBaseUpdate:h.firstBaseUpdate,lastBaseUpdate:h.lastBaseUpdate,shared:h.shared,callbacks:null})}function zm(h){return{lane:h,tag:0,payload:null,callback:null,next:null}}function Um(h,y,S){var M=h.updateQueue;if(M===null)return null;if(M=M.shared,(Er&2)!==0){var q=M.pending;return q===null?y.next=y:(y.next=q.next,q.next=y),M.pending=y,y=BS(h),_5(h,null,S),y}return US(h,M,y,S),BS(h)}function Ky(h,y,S){if(y=y.updateQueue,y!==null&&(y=y.shared,(S&4194048)!==0)){var M=y.lanes;M&=h.pendingLanes,S|=M,y.lanes=S,Yt(h,S)}}function BA(h,y){var S=h.updateQueue,M=h.alternate;if(M!==null&&(M=M.updateQueue,S===M)){var q=null,Z=null;if(S=S.firstBaseUpdate,S!==null){do{var Ne={lane:S.lane,tag:S.tag,payload:S.payload,callback:null,next:null};Z===null?q=Z=Ne:Z=Z.next=Ne,S=S.next}while(S!==null);Z===null?q=Z=y:Z=Z.next=y}else q=Z=y;S={baseState:M.baseState,firstBaseUpdate:q,lastBaseUpdate:Z,shared:M.shared,callbacks:M.callbacks},h.updateQueue=S;return}h=S.lastBaseUpdate,h===null?S.firstBaseUpdate=y:h.next=y,S.lastBaseUpdate=y}var HA=!1;function Xy(){if(HA){var h=Gg;if(h!==null)throw h}}function Yy(h,y,S,M){HA=!1;var q=h.updateQueue;Im=!1;var Z=q.firstBaseUpdate,Ne=q.lastBaseUpdate,He=q.shared.pending;if(He!==null){q.shared.pending=null;var rt=He,kt=rt.next;rt.next=null,Ne===null?Z=kt:Ne.next=kt,Ne=rt;var Ot=h.alternate;Ot!==null&&(Ot=Ot.updateQueue,He=Ot.lastBaseUpdate,He!==Ne&&(He===null?Ot.firstBaseUpdate=kt:He.next=kt,Ot.lastBaseUpdate=rt))}if(Z!==null){var Ut=q.baseState;Ne=0,Ot=kt=rt=null,He=Z;do{var Ct=He.lane&-536870913,Dt=Ct!==He.lane;if(Dt?(br&Ct)===Ct:(M&Ct)===Ct){Ct!==0&&Ct===Vg&&(HA=!0),Ot!==null&&(Ot=Ot.next={lane:0,tag:He.tag,payload:He.payload,callback:null,next:null});e:{var pn=h,Rn=He;Ct=y;var Wr=S;switch(Rn.tag){case 1:if(pn=Rn.payload,typeof pn=="function"){Ut=pn.call(Wr,Ut,Ct);break e}Ut=pn;break e;case 3:pn.flags=pn.flags&-65537|128;case 0:if(pn=Rn.payload,Ct=typeof pn=="function"?pn.call(Wr,Ut,Ct):pn,Ct==null)break e;Ut=m({},Ut,Ct);break e;case 2:Im=!0}}Ct=He.callback,Ct!==null&&(h.flags|=64,Dt&&(h.flags|=8192),Dt=q.callbacks,Dt===null?q.callbacks=[Ct]:Dt.push(Ct))}else Dt={lane:Ct,tag:He.tag,payload:He.payload,callback:He.callback,next:null},Ot===null?(kt=Ot=Dt,rt=Ut):Ot=Ot.next=Dt,Ne|=Ct;if(He=He.next,He===null){if(He=q.shared.pending,He===null)break;Dt=He,He=Dt.next,Dt.next=null,q.lastBaseUpdate=Dt,q.shared.pending=null}}while(!0);Ot===null&&(rt=Ut),q.baseState=rt,q.firstBaseUpdate=kt,q.lastBaseUpdate=Ot,Z===null&&(q.shared.lanes=0),Vm|=Ne,h.lanes=Ne,h.memoizedState=Ut}}function B5(h,y){if(typeof h!="function")throw Error(r(191,h));h.call(y)}function H5(h,y){var S=h.callbacks;if(S!==null)for(h.callbacks=null,h=0;hZ?Z:8;var Ne=ie.T,He={};ie.T=He,oj(h,!1,y,S);try{var rt=q(),kt=ie.S;if(kt!==null&&kt(He,rt),rt!==null&&typeof rt=="object"&&typeof rt.then=="function"){var Ot=wce(rt,M);Jy(h,y,Ot,Xo(h))}else Jy(h,y,M,Xo(h))}catch(Ut){Jy(h,y,{then:function(){},status:"rejected",reason:Ut},Xo())}finally{J.p=Z,Ne!==null&&He.types!==null&&(Ne.types=He.types),ie.T=Ne}}function Pce(){}function ij(h,y,S,M){if(h.tag!==5)throw Error(r(476));var q=vU(h).queue;yU(h,q,y,ue,S===null?Pce:function(){return wU(h),S(M)})}function vU(h){var y=h.memoizedState;if(y!==null)return y;y={memoizedState:ue,baseState:ue,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:ou,lastRenderedState:ue},next:null};var S={};return y.next={memoizedState:S,baseState:S,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:ou,lastRenderedState:S},next:null},h.memoizedState=y,h=h.alternate,h!==null&&(h.memoizedState=y),y}function wU(h){var y=vU(h);y.next===null&&(y=h.alternate.memoizedState),Jy(h,y.next.queue,{},Xo())}function sj(){return es(gv)}function SU(){return ti().memoizedState}function _U(){return ti().memoizedState}function Tce(h){for(var y=h.return;y!==null;){switch(y.tag){case 24:case 3:var S=Xo();h=zm(S);var M=Um(y,h,S);M!==null&&(So(M,y,S),Ky(M,y,S)),y={cache:RA()},h.payload=y;return}y=y.return}}function Ace(h,y,S){var M=Xo();S={lane:M,revertLane:0,gesture:null,action:S,hasEagerState:!1,eagerState:null,next:null},s_(h)?NU(y,S):(S=kA(h,y,S,M),S!==null&&(So(S,h,M),CU(S,y,M)))}function kU(h,y,S){var M=Xo();Jy(h,y,S,M)}function Jy(h,y,S,M){var q={lane:M,revertLane:0,gesture:null,action:S,hasEagerState:!1,eagerState:null,next:null};if(s_(h))NU(y,q);else{var Z=h.alternate;if(h.lanes===0&&(Z===null||Z.lanes===0)&&(Z=y.lastRenderedReducer,Z!==null))try{var Ne=y.lastRenderedState,He=Z(Ne,S);if(q.hasEagerState=!0,q.eagerState=He,qo(He,Ne))return US(h,y,q,0),aa===null&&zS(),!1}catch{}if(S=kA(h,y,q,M),S!==null)return So(S,h,M),CU(S,y,M),!0}return!1}function oj(h,y,S,M){if(M={lane:2,revertLane:zj(),gesture:null,action:M,hasEagerState:!1,eagerState:null,next:null},s_(h)){if(y)throw Error(r(479))}else y=kA(h,S,M,2),y!==null&&So(y,h,2)}function s_(h){var y=h.alternate;return h===Xn||y!==null&&y===Xn}function NU(h,y){Yg=JS=!0;var S=h.pending;S===null?y.next=y:(y.next=S.next,S.next=y),h.pending=y}function CU(h,y,S){if((S&4194048)!==0){var M=y.lanes;M&=h.pendingLanes,S|=M,y.lanes=S,Yt(h,S)}}var ev={readContext:es,use:n_,useCallback:Ia,useContext:Ia,useEffect:Ia,useImperativeHandle:Ia,useLayoutEffect:Ia,useInsertionEffect:Ia,useMemo:Ia,useReducer:Ia,useRef:Ia,useState:Ia,useDebugValue:Ia,useDeferredValue:Ia,useTransition:Ia,useSyncExternalStore:Ia,useId:Ia,useHostTransitionStatus:Ia,useFormState:Ia,useActionState:Ia,useOptimistic:Ia,useMemoCache:Ia,useCacheRefresh:Ia};ev.useEffectEvent=Ia;var PU={readContext:es,use:n_,useCallback:function(h,y){return $s().memoizedState=[h,y===void 0?null:y],h},useContext:es,useEffect:dU,useImperativeHandle:function(h,y,S){S=S!=null?S.concat([h]):null,a_(4194308,4,pU.bind(null,y,h),S)},useLayoutEffect:function(h,y){return a_(4194308,4,h,y)},useInsertionEffect:function(h,y){a_(4,2,h,y)},useMemo:function(h,y){var S=$s();y=y===void 0?null:y;var M=h();if(Gp){Re(!0);try{h()}finally{Re(!1)}}return S.memoizedState=[M,y],M},useReducer:function(h,y,S){var M=$s();if(S!==void 0){var q=S(y);if(Gp){Re(!0);try{S(y)}finally{Re(!1)}}}else q=y;return M.memoizedState=M.baseState=q,h={pending:null,lanes:0,dispatch:null,lastRenderedReducer:h,lastRenderedState:q},M.queue=h,h=h.dispatch=Ace.bind(null,Xn,h),[M.memoizedState,h]},useRef:function(h){var y=$s();return h={current:h},y.memoizedState=h},useState:function(h){h=ej(h);var y=h.queue,S=kU.bind(null,Xn,y);return y.dispatch=S,[h.memoizedState,S]},useDebugValue:rj,useDeferredValue:function(h,y){var S=$s();return aj(S,h,y)},useTransition:function(){var h=ej(!1);return h=yU.bind(null,Xn,h.queue,!0,!1),$s().memoizedState=h,[!1,h]},useSyncExternalStore:function(h,y,S){var M=Xn,q=$s();if(vr){if(S===void 0)throw Error(r(407));S=S()}else{if(S=y(),aa===null)throw Error(r(349));(br&127)!==0||K5(M,y,S)}q.memoizedState=S;var Z={value:S,getSnapshot:y};return q.queue=Z,dU(Y5.bind(null,M,Z,h),[h]),M.flags|=2048,Zg(9,{destroy:void 0},X5.bind(null,M,Z,S,y),null),S},useId:function(){var h=$s(),y=aa.identifierPrefix;if(vr){var S=od,M=sd;S=(M&~(1<<32-qe(M)-1)).toString(32)+S,y="_"+y+"R_"+S,S=e_++,0<\/script>",Z=Z.removeChild(Z.firstChild);break;case"select":Z=typeof M.is=="string"?Ne.createElement("select",{is:M.is}):Ne.createElement("select"),M.multiple?Z.multiple=!0:M.size&&(Z.size=M.size);break;default:Z=typeof M.is=="string"?Ne.createElement(q,{is:M.is}):Ne.createElement(q)}}Z[Nt]=y,Z[bt]=M;e:for(Ne=y.child;Ne!==null;){if(Ne.tag===5||Ne.tag===6)Z.appendChild(Ne.stateNode);else if(Ne.tag!==4&&Ne.tag!==27&&Ne.child!==null){Ne.child.return=Ne,Ne=Ne.child;continue}if(Ne===y)break e;for(;Ne.sibling===null;){if(Ne.return===null||Ne.return===y)break e;Ne=Ne.return}Ne.sibling.return=Ne.return,Ne=Ne.sibling}y.stateNode=Z;e:switch(ns(Z,q,M),q){case"button":case"input":case"select":case"textarea":M=!!M.autoFocus;break e;case"img":M=!0;break e;default:M=!1}M&&cu(y)}}return xa(y),wj(y,y.type,h===null?null:h.memoizedProps,y.pendingProps,S),null;case 6:if(h&&y.stateNode!=null)h.memoizedProps!==M&&cu(y);else{if(typeof M!="string"&&y.stateNode===null)throw Error(r(166));if(h=$.current,qg(y)){if(h=y.stateNode,S=y.memoizedProps,M=null,q=Ji,q!==null)switch(q.tag){case 27:case 5:M=q.memoizedProps}h[Nt]=y,h=!!(h.nodeValue===S||M!==null&&M.suppressHydrationWarning===!0||GB(h.nodeValue,S)),h||Lm(y,!0)}else h=C_(h).createTextNode(M),h[Nt]=y,y.stateNode=h}return xa(y),null;case 31:if(S=y.memoizedState,h===null||h.memoizedState!==null){if(M=qg(y),S!==null){if(h===null){if(!M)throw Error(r(318));if(h=y.memoizedState,h=h!==null?h.dehydrated:null,!h)throw Error(r(557));h[Nt]=y}else zp(),(y.flags&128)===0&&(y.memoizedState=null),y.flags|=4;xa(y),h=!1}else S=MA(),h!==null&&h.memoizedState!==null&&(h.memoizedState.hydrationErrors=S),h=!0;if(!h)return y.flags&256?(Go(y),y):(Go(y),null);if((y.flags&128)!==0)throw Error(r(558))}return xa(y),null;case 13:if(M=y.memoizedState,h===null||h.memoizedState!==null&&h.memoizedState.dehydrated!==null){if(q=qg(y),M!==null&&M.dehydrated!==null){if(h===null){if(!q)throw Error(r(318));if(q=y.memoizedState,q=q!==null?q.dehydrated:null,!q)throw Error(r(317));q[Nt]=y}else zp(),(y.flags&128)===0&&(y.memoizedState=null),y.flags|=4;xa(y),q=!1}else q=MA(),h!==null&&h.memoizedState!==null&&(h.memoizedState.hydrationErrors=q),q=!0;if(!q)return y.flags&256?(Go(y),y):(Go(y),null)}return Go(y),(y.flags&128)!==0?(y.lanes=S,y):(S=M!==null,h=h!==null&&h.memoizedState!==null,S&&(M=y.child,q=null,M.alternate!==null&&M.alternate.memoizedState!==null&&M.alternate.memoizedState.cachePool!==null&&(q=M.alternate.memoizedState.cachePool.pool),Z=null,M.memoizedState!==null&&M.memoizedState.cachePool!==null&&(Z=M.memoizedState.cachePool.pool),Z!==q&&(M.flags|=2048)),S!==h&&S&&(y.child.flags|=8192),u_(y,y.updateQueue),xa(y),null);case 4:return j(),h===null&&qj(y.stateNode.containerInfo),xa(y),null;case 10:return iu(y.type),xa(y),null;case 19:if(ne(ei),M=y.memoizedState,M===null)return xa(y),null;if(q=(y.flags&128)!==0,Z=M.rendering,Z===null)if(q)nv(M,!1);else{if(za!==0||h!==null&&(h.flags&128)!==0)for(h=y.child;h!==null;){if(Z=ZS(h),Z!==null){for(y.flags|=128,nv(M,!1),h=Z.updateQueue,y.updateQueue=h,u_(y,h),y.subtreeFlags=0,h=S,S=y.child;S!==null;)k5(S,h),S=S.sibling;return ce(ei,ei.current&1|2),vr&&ru(y,M.treeForkCount),y.child}h=h.sibling}M.tail!==null&&R()>g_&&(y.flags|=128,q=!0,nv(M,!1),y.lanes=4194304)}else{if(!q)if(h=ZS(Z),h!==null){if(y.flags|=128,q=!0,h=h.updateQueue,y.updateQueue=h,u_(y,h),nv(M,!0),M.tail===null&&M.tailMode==="hidden"&&!Z.alternate&&!vr)return xa(y),null}else 2*R()-M.renderingStartTime>g_&&S!==536870912&&(y.flags|=128,q=!0,nv(M,!1),y.lanes=4194304);M.isBackwards?(Z.sibling=y.child,y.child=Z):(h=M.last,h!==null?h.sibling=Z:y.child=Z,M.last=Z)}return M.tail!==null?(h=M.tail,M.rendering=h,M.tail=h.sibling,M.renderingStartTime=R(),h.sibling=null,S=ei.current,ce(ei,q?S&1|2:S&1),vr&&ru(y,M.treeForkCount),h):(xa(y),null);case 22:case 23:return Go(y),$A(),M=y.memoizedState!==null,h!==null?h.memoizedState!==null!==M&&(y.flags|=8192):M&&(y.flags|=8192),M?(S&536870912)!==0&&(y.flags&128)===0&&(xa(y),y.subtreeFlags&6&&(y.flags|=8192)):xa(y),S=y.updateQueue,S!==null&&u_(y,S.retryQueue),S=null,h!==null&&h.memoizedState!==null&&h.memoizedState.cachePool!==null&&(S=h.memoizedState.cachePool.pool),M=null,y.memoizedState!==null&&y.memoizedState.cachePool!==null&&(M=y.memoizedState.cachePool.pool),M!==S&&(y.flags|=2048),h!==null&&ne(Hp),null;case 24:return S=null,h!==null&&(S=h.memoizedState.cache),y.memoizedState.cache!==S&&(y.flags|=2048),iu(si),xa(y),null;case 25:return null;case 30:return null}throw Error(r(156,y.tag))}function Fce(h,y){switch(AA(y),y.tag){case 1:return h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 3:return iu(si),j(),h=y.flags,(h&65536)!==0&&(h&128)===0?(y.flags=h&-65537|128,y):null;case 26:case 27:case 5:return K(y),null;case 31:if(y.memoizedState!==null){if(Go(y),y.alternate===null)throw Error(r(340));zp()}return h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 13:if(Go(y),h=y.memoizedState,h!==null&&h.dehydrated!==null){if(y.alternate===null)throw Error(r(340));zp()}return h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 19:return ne(ei),null;case 4:return j(),null;case 10:return iu(y.type),null;case 22:case 23:return Go(y),$A(),h!==null&&ne(Hp),h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 24:return iu(si),null;case 25:return null;default:return null}}function QU(h,y){switch(AA(y),y.tag){case 3:iu(si),j();break;case 26:case 27:case 5:K(y);break;case 4:j();break;case 31:y.memoizedState!==null&&Go(y);break;case 13:Go(y);break;case 19:ne(ei);break;case 10:iu(y.type);break;case 22:case 23:Go(y),$A(),h!==null&&ne(Hp);break;case 24:iu(si)}}function rv(h,y){try{var S=y.updateQueue,M=S!==null?S.lastEffect:null;if(M!==null){var q=M.next;S=q;do{if((S.tag&h)===h){M=void 0;var Z=S.create,Ne=S.inst;M=Z(),Ne.destroy=M}S=S.next}while(S!==q)}}catch(He){zr(y,y.return,He)}}function qm(h,y,S){try{var M=y.updateQueue,q=M!==null?M.lastEffect:null;if(q!==null){var Z=q.next;M=Z;do{if((M.tag&h)===h){var Ne=M.inst,He=Ne.destroy;if(He!==void 0){Ne.destroy=void 0,q=y;var rt=S,kt=He;try{kt()}catch(Ot){zr(q,rt,Ot)}}}M=M.next}while(M!==Z)}}catch(Ot){zr(y,y.return,Ot)}}function ZU(h){var y=h.updateQueue;if(y!==null){var S=h.stateNode;try{H5(y,S)}catch(M){zr(h,h.return,M)}}}function JU(h,y,S){S.props=Wp(h.type,h.memoizedProps),S.state=h.memoizedState;try{S.componentWillUnmount()}catch(M){zr(h,y,M)}}function av(h,y){try{var S=h.ref;if(S!==null){switch(h.tag){case 26:case 27:case 5:var M=h.stateNode;break;case 30:M=h.stateNode;break;default:M=h.stateNode}typeof S=="function"?h.refCleanup=S(M):S.current=M}}catch(q){zr(h,y,q)}}function ld(h,y){var S=h.ref,M=h.refCleanup;if(S!==null)if(typeof M=="function")try{M()}catch(q){zr(h,y,q)}finally{h.refCleanup=null,h=h.alternate,h!=null&&(h.refCleanup=null)}else if(typeof S=="function")try{S(null)}catch(q){zr(h,y,q)}else S.current=null}function eB(h){var y=h.type,S=h.memoizedProps,M=h.stateNode;try{e:switch(y){case"button":case"input":case"select":case"textarea":S.autoFocus&&M.focus();break e;case"img":S.src?M.src=S.src:S.srcSet&&(M.srcset=S.srcSet)}}catch(q){zr(h,h.return,q)}}function Sj(h,y,S){try{var M=h.stateNode;nde(M,h.type,S,y),M[bt]=y}catch(q){zr(h,h.return,q)}}function tB(h){return h.tag===5||h.tag===3||h.tag===26||h.tag===27&&Ym(h.type)||h.tag===4}function _j(h){e:for(;;){for(;h.sibling===null;){if(h.return===null||tB(h.return))return null;h=h.return}for(h.sibling.return=h.return,h=h.sibling;h.tag!==5&&h.tag!==6&&h.tag!==18;){if(h.tag===27&&Ym(h.type)||h.flags&2||h.child===null||h.tag===4)continue e;h.child.return=h,h=h.child}if(!(h.flags&2))return h.stateNode}}function kj(h,y,S){var M=h.tag;if(M===5||M===6)h=h.stateNode,y?(S.nodeType===9?S.body:S.nodeName==="HTML"?S.ownerDocument.body:S).insertBefore(h,y):(y=S.nodeType===9?S.body:S.nodeName==="HTML"?S.ownerDocument.body:S,y.appendChild(h),S=S._reactRootContainer,S!=null||y.onclick!==null||(y.onclick=qt));else if(M!==4&&(M===27&&Ym(h.type)&&(S=h.stateNode,y=null),h=h.child,h!==null))for(kj(h,y,S),h=h.sibling;h!==null;)kj(h,y,S),h=h.sibling}function m_(h,y,S){var M=h.tag;if(M===5||M===6)h=h.stateNode,y?S.insertBefore(h,y):S.appendChild(h);else if(M!==4&&(M===27&&Ym(h.type)&&(S=h.stateNode),h=h.child,h!==null))for(m_(h,y,S),h=h.sibling;h!==null;)m_(h,y,S),h=h.sibling}function nB(h){var y=h.stateNode,S=h.memoizedProps;try{for(var M=h.type,q=y.attributes;q.length;)y.removeAttributeNode(q[0]);ns(y,M,S),y[Nt]=h,y[bt]=S}catch(Z){zr(h,h.return,Z)}}var du=!1,ci=!1,Nj=!1,rB=typeof WeakSet=="function"?WeakSet:Set,Ri=null;function Rce(h,y){if(h=h.containerInfo,Gj=D_,h=f5(h),xA(h)){if("selectionStart"in h)var S={start:h.selectionStart,end:h.selectionEnd};else e:{S=(S=h.ownerDocument)&&S.defaultView||window;var M=S.getSelection&&S.getSelection();if(M&&M.rangeCount!==0){S=M.anchorNode;var q=M.anchorOffset,Z=M.focusNode;M=M.focusOffset;try{S.nodeType,Z.nodeType}catch{S=null;break e}var Ne=0,He=-1,rt=-1,kt=0,Ot=0,Ut=h,Ct=null;t:for(;;){for(var Dt;Ut!==S||q!==0&&Ut.nodeType!==3||(He=Ne+q),Ut!==Z||M!==0&&Ut.nodeType!==3||(rt=Ne+M),Ut.nodeType===3&&(Ne+=Ut.nodeValue.length),(Dt=Ut.firstChild)!==null;)Ct=Ut,Ut=Dt;for(;;){if(Ut===h)break t;if(Ct===S&&++kt===q&&(He=Ne),Ct===Z&&++Ot===M&&(rt=Ne),(Dt=Ut.nextSibling)!==null)break;Ut=Ct,Ct=Ut.parentNode}Ut=Dt}S=He===-1||rt===-1?null:{start:He,end:rt}}else S=null}S=S||{start:0,end:0}}else S=null;for(Wj={focusedElem:h,selectionRange:S},D_=!1,Ri=y;Ri!==null;)if(y=Ri,h=y.child,(y.subtreeFlags&1028)!==0&&h!==null)h.return=y,Ri=h;else for(;Ri!==null;){switch(y=Ri,Z=y.alternate,h=y.flags,y.tag){case 0:if((h&4)!==0&&(h=y.updateQueue,h=h!==null?h.events:null,h!==null))for(S=0;S title"))),ns(Z,M,S),Z[Nt]=h,Ke(Z),M=Z;break e;case"link":var Ne=c8("link","href",q).get(M+(S.href||""));if(Ne){for(var He=0;HeWr&&(Ne=Wr,Wr=Rn,Rn=Ne);var ft=h5(He,Rn),dt=h5(He,Wr);if(ft&&dt&&(Dt.rangeCount!==1||Dt.anchorNode!==ft.node||Dt.anchorOffset!==ft.offset||Dt.focusNode!==dt.node||Dt.focusOffset!==dt.offset)){var _t=Ut.createRange();_t.setStart(ft.node,ft.offset),Dt.removeAllRanges(),Rn>Wr?(Dt.addRange(_t),Dt.extend(dt.node,dt.offset)):(_t.setEnd(dt.node,dt.offset),Dt.addRange(_t))}}}}for(Ut=[],Dt=He;Dt=Dt.parentNode;)Dt.nodeType===1&&Ut.push({element:Dt,left:Dt.scrollLeft,top:Dt.scrollTop});for(typeof He.focus=="function"&&He.focus(),He=0;HeS?32:S,ie.T=null,S=Ej,Ej=null;var Z=Wm,Ne=fu;if(wi=0,rb=Wm=null,fu=0,(Er&6)!==0)throw Error(r(331));var He=Er;if(Er|=4,pB(Z.current),uB(Z,Z.current,Ne,S),Er=He,dv(0,!1),Fe&&typeof Fe.onPostCommitFiberRoot=="function")try{Fe.onPostCommitFiberRoot(Me,Z)}catch{}return!0}finally{J.p=q,ie.T=M,EB(h,y)}}function FB(h,y,S){y=kl(S,y),y=uj(h.stateNode,y,2),h=Um(h,y,2),h!==null&&(gt(h,2),cd(h))}function zr(h,y,S){if(h.tag===3)FB(h,h,S);else for(;y!==null;){if(y.tag===3){FB(y,h,S);break}else if(y.tag===1){var M=y.stateNode;if(typeof y.type.getDerivedStateFromError=="function"||typeof M.componentDidCatch=="function"&&(Gm===null||!Gm.has(M))){h=kl(S,h),S=RU(2),M=Um(y,S,2),M!==null&&(LU(S,M,y,h),gt(M,2),cd(M));break}}y=y.return}}function Lj(h,y,S){var M=h.pingCache;if(M===null){M=h.pingCache=new Ice;var q=new Set;M.set(y,q)}else q=M.get(y),q===void 0&&(q=new Set,M.set(y,q));q.has(S)||(Tj=!0,q.add(S),h=qce.bind(null,h,y,S),y.then(h,h))}function qce(h,y,S){var M=h.pingCache;M!==null&&M.delete(y),h.pingedLanes|=h.suspendedLanes&S,h.warmLanes&=~S,aa===h&&(br&S)===S&&(za===4||za===3&&(br&62914560)===br&&300>R()-f_?(Er&2)===0&&ab(h,0):Aj|=S,nb===br&&(nb=0)),cd(h)}function RB(h,y){y===0&&(y=Ze()),h=Op(h,y),h!==null&&(gt(h,y),cd(h))}function $ce(h){var y=h.memoizedState,S=0;y!==null&&(S=y.retryLane),RB(h,S)}function Vce(h,y){var S=0;switch(h.tag){case 31:case 13:var M=h.stateNode,q=h.memoizedState;q!==null&&(S=q.retryLane);break;case 19:M=h.stateNode;break;case 22:M=h.stateNode._retryCache;break;default:throw Error(r(314))}M!==null&&M.delete(y),RB(h,S)}function Gce(h,y){return ge(h,y)}var S_=null,sb=null,Oj=!1,__=!1,Ij=!1,Xm=0;function cd(h){h!==sb&&h.next===null&&(sb===null?S_=sb=h:sb=sb.next=h),__=!0,Oj||(Oj=!0,Kce())}function dv(h,y){if(!Ij&&__){Ij=!0;do for(var S=!1,M=S_;M!==null;){if(h!==0){var q=M.pendingLanes;if(q===0)var Z=0;else{var Ne=M.suspendedLanes,He=M.pingedLanes;Z=(1<<31-qe(42|h)+1)-1,Z&=q&~(Ne&~He),Z=Z&201326741?Z&201326741|1:Z?Z|2:0}Z!==0&&(S=!0,zB(M,Z))}else Z=br,Z=me(M,M===aa?Z:0,M.cancelPendingCommit!==null||M.timeoutHandle!==-1),(Z&3)===0||ve(M,Z)||(S=!0,zB(M,Z));M=M.next}while(S);Ij=!1}}function Wce(){LB()}function LB(){__=Oj=!1;var h=0;Xm!==0&&ade()&&(h=Xm);for(var y=R(),S=null,M=S_;M!==null;){var q=M.next,Z=OB(M,y);Z===0?(M.next=null,S===null?S_=q:S.next=q,q===null&&(sb=S)):(S=M,(h!==0||(Z&3)!==0)&&(__=!0)),M=q}wi!==0&&wi!==5||dv(h),Xm!==0&&(Xm=0)}function OB(h,y){for(var S=h.suspendedLanes,M=h.pingedLanes,q=h.expirationTimes,Z=h.pendingLanes&-62914561;0He)break;var Ot=rt.transferSize,Ut=rt.initiatorType;Ot&&WB(Ut)&&(rt=rt.responseEnd,Ne+=Ot*(rt"u"?null:document;function i8(h,y,S){var M=ob;if(M&&typeof y=="string"&&y){var q=En(y);q='link[rel="'+h+'"][href="'+q+'"]',typeof S=="string"&&(q+='[crossorigin="'+S+'"]'),a8.has(q)||(a8.add(q),h={rel:h,crossOrigin:S,href:y},M.querySelector(q)===null&&(y=M.createElement("link"),ns(y,"link",h),Ke(y),M.head.appendChild(y)))}}function hde(h){gu.D(h),i8("dns-prefetch",h,null)}function pde(h,y){gu.C(h,y),i8("preconnect",h,y)}function fde(h,y,S){gu.L(h,y,S);var M=ob;if(M&&h&&y){var q='link[rel="preload"][as="'+En(y)+'"]';y==="image"&&S&&S.imageSrcSet?(q+='[imagesrcset="'+En(S.imageSrcSet)+'"]',typeof S.imageSizes=="string"&&(q+='[imagesizes="'+En(S.imageSizes)+'"]')):q+='[href="'+En(h)+'"]';var Z=q;switch(y){case"style":Z=lb(h);break;case"script":Z=cb(h)}jl.has(Z)||(h=m({rel:"preload",href:y==="image"&&S&&S.imageSrcSet?void 0:h,as:y},S),jl.set(Z,h),M.querySelector(q)!==null||y==="style"&&M.querySelector(pv(Z))||y==="script"&&M.querySelector(fv(Z))||(y=M.createElement("link"),ns(y,"link",h),Ke(y),M.head.appendChild(y)))}}function gde(h,y){gu.m(h,y);var S=ob;if(S&&h){var M=y&&typeof y.as=="string"?y.as:"script",q='link[rel="modulepreload"][as="'+En(M)+'"][href="'+En(h)+'"]',Z=q;switch(M){case"audioworklet":case"paintworklet":case"serviceworker":case"sharedworker":case"worker":case"script":Z=cb(h)}if(!jl.has(Z)&&(h=m({rel:"modulepreload",href:h},y),jl.set(Z,h),S.querySelector(q)===null)){switch(M){case"audioworklet":case"paintworklet":case"serviceworker":case"sharedworker":case"worker":case"script":if(S.querySelector(fv(Z)))return}M=S.createElement("link"),ns(M,"link",h),Ke(M),S.head.appendChild(M)}}}function bde(h,y,S){gu.S(h,y,S);var M=ob;if(M&&h){var q=et(M).hoistableStyles,Z=lb(h);y=y||"default";var Ne=q.get(Z);if(!Ne){var He={loading:0,preload:null};if(Ne=M.querySelector(pv(Z)))He.loading=5;else{h=m({rel:"stylesheet",href:h,"data-precedence":y},S),(S=jl.get(Z))&&eM(h,S);var rt=Ne=M.createElement("link");Ke(rt),ns(rt,"link",h),rt._p=new Promise(function(kt,Ot){rt.onload=kt,rt.onerror=Ot}),rt.addEventListener("load",function(){He.loading|=1}),rt.addEventListener("error",function(){He.loading|=2}),He.loading|=4,T_(Ne,y,M)}Ne={type:"stylesheet",instance:Ne,count:1,state:He},q.set(Z,Ne)}}}function xde(h,y){gu.X(h,y);var S=ob;if(S&&h){var M=et(S).hoistableScripts,q=cb(h),Z=M.get(q);Z||(Z=S.querySelector(fv(q)),Z||(h=m({src:h,async:!0},y),(y=jl.get(q))&&tM(h,y),Z=S.createElement("script"),Ke(Z),ns(Z,"link",h),S.head.appendChild(Z)),Z={type:"script",instance:Z,count:1,state:null},M.set(q,Z))}}function yde(h,y){gu.M(h,y);var S=ob;if(S&&h){var M=et(S).hoistableScripts,q=cb(h),Z=M.get(q);Z||(Z=S.querySelector(fv(q)),Z||(h=m({src:h,async:!0,type:"module"},y),(y=jl.get(q))&&tM(h,y),Z=S.createElement("script"),Ke(Z),ns(Z,"link",h),S.head.appendChild(Z)),Z={type:"script",instance:Z,count:1,state:null},M.set(q,Z))}}function s8(h,y,S,M){var q=(q=$.current)?P_(q):null;if(!q)throw Error(r(446));switch(h){case"meta":case"title":return null;case"style":return typeof S.precedence=="string"&&typeof S.href=="string"?(y=lb(S.href),S=et(q).hoistableStyles,M=S.get(y),M||(M={type:"style",instance:null,count:0,state:null},S.set(y,M)),M):{type:"void",instance:null,count:0,state:null};case"link":if(S.rel==="stylesheet"&&typeof S.href=="string"&&typeof S.precedence=="string"){h=lb(S.href);var Z=et(q).hoistableStyles,Ne=Z.get(h);if(Ne||(q=q.ownerDocument||q,Ne={type:"stylesheet",instance:null,count:0,state:{loading:0,preload:null}},Z.set(h,Ne),(Z=q.querySelector(pv(h)))&&!Z._p&&(Ne.instance=Z,Ne.state.loading=5),jl.has(h)||(S={rel:"preload",as:"style",href:S.href,crossOrigin:S.crossOrigin,integrity:S.integrity,media:S.media,hrefLang:S.hrefLang,referrerPolicy:S.referrerPolicy},jl.set(h,S),Z||vde(q,h,S,Ne.state))),y&&M===null)throw Error(r(528,""));return Ne}if(y&&M!==null)throw Error(r(529,""));return null;case"script":return y=S.async,S=S.src,typeof S=="string"&&y&&typeof y!="function"&&typeof y!="symbol"?(y=cb(S),S=et(q).hoistableScripts,M=S.get(y),M||(M={type:"script",instance:null,count:0,state:null},S.set(y,M)),M):{type:"void",instance:null,count:0,state:null};default:throw Error(r(444,h))}}function lb(h){return'href="'+En(h)+'"'}function pv(h){return'link[rel="stylesheet"]['+h+"]"}function o8(h){return m({},h,{"data-precedence":h.precedence,precedence:null})}function vde(h,y,S,M){h.querySelector('link[rel="preload"][as="style"]['+y+"]")?M.loading=1:(y=h.createElement("link"),M.preload=y,y.addEventListener("load",function(){return M.loading|=1}),y.addEventListener("error",function(){return M.loading|=2}),ns(y,"link",S),Ke(y),h.head.appendChild(y))}function cb(h){return'[src="'+En(h)+'"]'}function fv(h){return"script[async]"+h}function l8(h,y,S){if(y.count++,y.instance===null)switch(y.type){case"style":var M=h.querySelector('style[data-href~="'+En(S.href)+'"]');if(M)return y.instance=M,Ke(M),M;var q=m({},S,{"data-href":S.href,"data-precedence":S.precedence,href:null,precedence:null});return M=(h.ownerDocument||h).createElement("style"),Ke(M),ns(M,"style",q),T_(M,S.precedence,h),y.instance=M;case"stylesheet":q=lb(S.href);var Z=h.querySelector(pv(q));if(Z)return y.state.loading|=4,y.instance=Z,Ke(Z),Z;M=o8(S),(q=jl.get(q))&&eM(M,q),Z=(h.ownerDocument||h).createElement("link"),Ke(Z);var Ne=Z;return Ne._p=new Promise(function(He,rt){Ne.onload=He,Ne.onerror=rt}),ns(Z,"link",M),y.state.loading|=4,T_(Z,S.precedence,h),y.instance=Z;case"script":return Z=cb(S.src),(q=h.querySelector(fv(Z)))?(y.instance=q,Ke(q),q):(M=S,(q=jl.get(Z))&&(M=m({},S),tM(M,q)),h=h.ownerDocument||h,q=h.createElement("script"),Ke(q),ns(q,"link",M),h.head.appendChild(q),y.instance=q);case"void":return null;default:throw Error(r(443,y.type))}else y.type==="stylesheet"&&(y.state.loading&4)===0&&(M=y.instance,y.state.loading|=4,T_(M,S.precedence,h));return y.instance}function T_(h,y,S){for(var M=S.querySelectorAll('link[rel="stylesheet"][data-precedence],style[data-precedence]'),q=M.length?M[M.length-1]:null,Z=q,Ne=0;Ne title"):null)}function wde(h,y,S){if(S===1||y.itemProp!=null)return!1;switch(h){case"meta":case"title":return!0;case"style":if(typeof y.precedence!="string"||typeof y.href!="string"||y.href==="")break;return!0;case"link":if(typeof y.rel!="string"||typeof y.href!="string"||y.href===""||y.onLoad||y.onError)break;return y.rel==="stylesheet"?(h=y.disabled,typeof y.precedence=="string"&&h==null):!0;case"script":if(y.async&&typeof y.async!="function"&&typeof y.async!="symbol"&&!y.onLoad&&!y.onError&&y.src&&typeof y.src=="string")return!0}return!1}function u8(h){return!(h.type==="stylesheet"&&(h.state.loading&3)===0)}function Sde(h,y,S,M){if(S.type==="stylesheet"&&(typeof M.media!="string"||matchMedia(M.media).matches!==!1)&&(S.state.loading&4)===0){if(S.instance===null){var q=lb(M.href),Z=y.querySelector(pv(q));if(Z){y=Z._p,y!==null&&typeof y=="object"&&typeof y.then=="function"&&(h.count++,h=j_.bind(h),y.then(h,h)),S.state.loading|=4,S.instance=Z,Ke(Z);return}Z=y.ownerDocument||y,M=o8(M),(q=jl.get(q))&&eM(M,q),Z=Z.createElement("link"),Ke(Z);var Ne=Z;Ne._p=new Promise(function(He,rt){Ne.onload=He,Ne.onerror=rt}),ns(Z,"link",M),S.instance=Z}h.stylesheets===null&&(h.stylesheets=new Map),h.stylesheets.set(S,y),(y=S.state.preload)&&(S.state.loading&3)===0&&(h.count++,S=j_.bind(h),y.addEventListener("load",S),y.addEventListener("error",S))}}var nM=0;function _de(h,y){return h.stylesheets&&h.count===0&&E_(h,h.stylesheets),0nM?50:800)+y);return h.unsuspend=S,function(){h.unsuspend=null,clearTimeout(M),clearTimeout(q)}}:null}function j_(){if(this.count--,this.count===0&&(this.imgCount===0||!this.waitingForImages)){if(this.stylesheets)E_(this,this.stylesheets);else if(this.unsuspend){var h=this.unsuspend;this.unsuspend=null,h()}}}var M_=null;function E_(h,y){h.stylesheets=null,h.unsuspend!==null&&(h.count++,M_=new Map,y.forEach(kde,h),M_=null,j_.call(h))}function kde(h,y){if(!(y.state.loading&4)){var S=M_.get(h);if(S)var M=S.get(null);else{S=new Map,M_.set(h,S);for(var q=h.querySelectorAll("link[data-precedence],style[data-precedence]"),Z=0;Z"u"||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!="function"))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(t)}catch(e){console.error(e)}}return t(),uM.exports=Bde(),uM.exports}var qde=Hde();const Hn=t=>typeof t=="string",Sv=()=>{let t,e;const n=new Promise((r,i)=>{t=r,e=i});return n.resolve=t,n.reject=e,n},R8=t=>t==null?"":""+t,$de=(t,e,n)=>{t.forEach(r=>{e[r]&&(n[r]=e[r])})},Vde=/###/g,L8=t=>t&&t.indexOf("###")>-1?t.replace(Vde,"."):t,O8=t=>!t||Hn(t),y0=(t,e,n)=>{const r=Hn(e)?e.split("."):e;let i=0;for(;i{const{obj:r,k:i}=y0(t,e,Object);if(r!==void 0||e.length===1){r[i]=n;return}let s=e[e.length-1],o=e.slice(0,e.length-1),l=y0(t,o,Object);for(;l.obj===void 0&&o.length;)s=`${o[o.length-1]}.${s}`,o=o.slice(0,o.length-1),l=y0(t,o,Object),l?.obj&&typeof l.obj[`${l.k}.${s}`]<"u"&&(l.obj=void 0);l.obj[`${l.k}.${s}`]=n},Gde=(t,e,n,r)=>{const{obj:i,k:s}=y0(t,e,Object);i[s]=i[s]||[],i[s].push(n)},sN=(t,e)=>{const{obj:n,k:r}=y0(t,e);if(n&&Object.prototype.hasOwnProperty.call(n,r))return n[r]},Wde=(t,e,n)=>{const r=sN(t,n);return r!==void 0?r:sN(e,n)},OY=(t,e,n)=>{for(const r in e)r!=="__proto__"&&r!=="constructor"&&(r in t?Hn(t[r])||t[r]instanceof String||Hn(e[r])||e[r]instanceof String?n&&(t[r]=e[r]):OY(t[r],e[r],n):t[r]=e[r]);return t},ub=t=>t.replace(/[\-\[\]\/\{\}\(\)\*\+\?\.\\\^\$\|]/g,"\\$&");var Kde={"&":"&","<":"<",">":">",'"':""","'":"'","/":"/"};const Xde=t=>Hn(t)?t.replace(/[&<>"'\/]/g,e=>Kde[e]):t;class Yde{constructor(e){this.capacity=e,this.regExpMap=new Map,this.regExpQueue=[]}getRegExp(e){const n=this.regExpMap.get(e);if(n!==void 0)return n;const r=new RegExp(e);return this.regExpQueue.length===this.capacity&&this.regExpMap.delete(this.regExpQueue.shift()),this.regExpMap.set(e,r),this.regExpQueue.push(e),r}}const Qde=[" ",",","?","!",";"],Zde=new Yde(20),Jde=(t,e,n)=>{e=e||"",n=n||"";const r=Qde.filter(o=>e.indexOf(o)<0&&n.indexOf(o)<0);if(r.length===0)return!0;const i=Zde.getRegExp(`(${r.map(o=>o==="?"?"\\?":o).join("|")})`);let s=!i.test(t);if(!s){const o=t.indexOf(n);o>0&&!i.test(t.substring(0,o))&&(s=!0)}return s},R3=(t,e,n=".")=>{if(!t)return;if(t[e])return Object.prototype.hasOwnProperty.call(t,e)?t[e]:void 0;const r=e.split(n);let i=t;for(let s=0;s-1&&ct?.replace("_","-"),eue={type:"logger",log(t){this.output("log",t)},warn(t){this.output("warn",t)},error(t){this.output("error",t)},output(t,e){console?.[t]?.apply?.(console,e)}};class oN{constructor(e,n={}){this.init(e,n)}init(e,n={}){this.prefix=n.prefix||"i18next:",this.logger=e||eue,this.options=n,this.debug=n.debug}log(...e){return this.forward(e,"log","",!0)}warn(...e){return this.forward(e,"warn","",!0)}error(...e){return this.forward(e,"error","")}deprecate(...e){return this.forward(e,"warn","WARNING DEPRECATED: ",!0)}forward(e,n,r,i){return i&&!this.debug?null:(Hn(e[0])&&(e[0]=`${r}${this.prefix} ${e[0]}`),this.logger[n](e))}create(e){return new oN(this.logger,{prefix:`${this.prefix}:${e}:`,...this.options})}clone(e){return e=e||this.options,e.prefix=e.prefix||this.prefix,new oN(this.logger,e)}}var Cd=new oN;let EP=class{constructor(){this.observers={}}on(e,n){return e.split(" ").forEach(r=>{this.observers[r]||(this.observers[r]=new Map);const i=this.observers[r].get(n)||0;this.observers[r].set(n,i+1)}),this}off(e,n){if(this.observers[e]){if(!n){delete this.observers[e];return}this.observers[e].delete(n)}}emit(e,...n){this.observers[e]&&Array.from(this.observers[e].entries()).forEach(([i,s])=>{for(let o=0;o{for(let o=0;o-1&&this.options.ns.splice(n,1)}getResource(e,n,r,i={}){const s=i.keySeparator!==void 0?i.keySeparator:this.options.keySeparator,o=i.ignoreJSONStructure!==void 0?i.ignoreJSONStructure:this.options.ignoreJSONStructure;let l;e.indexOf(".")>-1?l=e.split("."):(l=[e,n],r&&(Array.isArray(r)?l.push(...r):Hn(r)&&s?l.push(...r.split(s)):l.push(r)));const c=sN(this.data,l);return!c&&!n&&!r&&e.indexOf(".")>-1&&(e=l[0],n=l[1],r=l.slice(2).join(".")),c||!o||!Hn(r)?c:R3(this.data?.[e]?.[n],r,s)}addResource(e,n,r,i,s={silent:!1}){const o=s.keySeparator!==void 0?s.keySeparator:this.options.keySeparator;let l=[e,n];r&&(l=l.concat(o?r.split(o):r)),e.indexOf(".")>-1&&(l=e.split("."),i=n,n=l[1]),this.addNamespaces(n),I8(this.data,l,i),s.silent||this.emit("added",e,n,r,i)}addResources(e,n,r,i={silent:!1}){for(const s in r)(Hn(r[s])||Array.isArray(r[s]))&&this.addResource(e,n,s,r[s],{silent:!0});i.silent||this.emit("added",e,n,r)}addResourceBundle(e,n,r,i,s,o={silent:!1,skipCopy:!1}){let l=[e,n];e.indexOf(".")>-1&&(l=e.split("."),i=r,r=n,n=l[1]),this.addNamespaces(n);let c=sN(this.data,l)||{};o.skipCopy||(r=JSON.parse(JSON.stringify(r))),i?OY(c,r,s):c={...c,...r},I8(this.data,l,c),o.silent||this.emit("added",e,n,r)}removeResourceBundle(e,n){this.hasResourceBundle(e,n)&&delete this.data[e][n],this.removeNamespaces(n),this.emit("removed",e,n)}hasResourceBundle(e,n){return this.getResource(e,n)!==void 0}getResourceBundle(e,n){return n||(n=this.options.defaultNS),this.getResource(e,n)}getDataByLanguage(e){return this.data[e]}hasLanguageSomeTranslations(e){const n=this.getDataByLanguage(e);return!!(n&&Object.keys(n)||[]).find(i=>n[i]&&Object.keys(n[i]).length>0)}toJSON(){return this.data}}var IY={processors:{},addPostProcessor(t){this.processors[t.name]=t},handle(t,e,n,r,i){return t.forEach(s=>{e=this.processors[s]?.process(e,n,r,i)??e}),e}};const zY=Symbol("i18next/PATH_KEY");function tue(){const t=[],e=Object.create(null);let n;return e.get=(r,i)=>(n?.revoke?.(),i===zY?t:(t.push(i),n=Proxy.revocable(r,e),n.proxy)),Proxy.revocable(Object.create(null),e).proxy}function L3(t,e){const{[zY]:n}=t(tue());return n.join(e?.keySeparator??".")}const U8={},fM=t=>!Hn(t)&&typeof t!="boolean"&&typeof t!="number";class lN extends EP{constructor(e,n={}){super(),$de(["resourceStore","languageUtils","pluralResolver","interpolator","backendConnector","i18nFormat","utils"],e,this),this.options=n,this.options.keySeparator===void 0&&(this.options.keySeparator="."),this.logger=Cd.create("translator")}changeLanguage(e){e&&(this.language=e)}exists(e,n={interpolation:{}}){const r={...n};if(e==null)return!1;const i=this.resolve(e,r);if(i?.res===void 0)return!1;const s=fM(i.res);return!(r.returnObjects===!1&&s)}extractFromKey(e,n){let r=n.nsSeparator!==void 0?n.nsSeparator:this.options.nsSeparator;r===void 0&&(r=":");const i=n.keySeparator!==void 0?n.keySeparator:this.options.keySeparator;let s=n.ns||this.options.defaultNS||[];const o=r&&e.indexOf(r)>-1,l=!this.options.userDefinedKeySeparator&&!n.keySeparator&&!this.options.userDefinedNsSeparator&&!n.nsSeparator&&!Jde(e,r,i);if(o&&!l){const c=e.match(this.interpolator.nestingRegexp);if(c&&c.length>0)return{key:e,namespaces:Hn(s)?[s]:s};const d=e.split(r);(r!==i||r===i&&this.options.ns.indexOf(d[0])>-1)&&(s=d.shift()),e=d.join(i)}return{key:e,namespaces:Hn(s)?[s]:s}}translate(e,n,r){let i=typeof n=="object"?{...n}:n;if(typeof i!="object"&&this.options.overloadTranslationOptionHandler&&(i=this.options.overloadTranslationOptionHandler(arguments)),typeof i=="object"&&(i={...i}),i||(i={}),e==null)return"";typeof e=="function"&&(e=L3(e,{...this.options,...i})),Array.isArray(e)||(e=[String(e)]);const s=i.returnDetails!==void 0?i.returnDetails:this.options.returnDetails,o=i.keySeparator!==void 0?i.keySeparator:this.options.keySeparator,{key:l,namespaces:c}=this.extractFromKey(e[e.length-1],i),d=c[c.length-1];let u=i.nsSeparator!==void 0?i.nsSeparator:this.options.nsSeparator;u===void 0&&(u=":");const m=i.lng||this.language,p=i.appendNamespaceToCIMode||this.options.appendNamespaceToCIMode;if(m?.toLowerCase()==="cimode")return p?s?{res:`${d}${u}${l}`,usedKey:l,exactUsedKey:l,usedLng:m,usedNS:d,usedParams:this.getUsedParamsDetails(i)}:`${d}${u}${l}`:s?{res:l,usedKey:l,exactUsedKey:l,usedLng:m,usedNS:d,usedParams:this.getUsedParamsDetails(i)}:l;const f=this.resolve(e,i);let x=f?.res;const v=f?.usedKey||l,g=f?.exactUsedKey||l,b=["[object Number]","[object Function]","[object RegExp]"],_=i.joinArrays!==void 0?i.joinArrays:this.options.joinArrays,C=!this.i18nFormat||this.i18nFormat.handleAsObject,P=i.count!==void 0&&!Hn(i.count),N=lN.hasDefaultValue(i),A=P?this.pluralResolver.getSuffix(m,i.count,i):"",T=i.ordinal&&P?this.pluralResolver.getSuffix(m,i.count,{ordinal:!1}):"",F=P&&!i.ordinal&&i.count===0,k=F&&i[`defaultValue${this.options.pluralSeparator}zero`]||i[`defaultValue${A}`]||i[`defaultValue${T}`]||i.defaultValue;let D=x;C&&!x&&N&&(D=k);const H=fM(D),z=Object.prototype.toString.apply(D);if(C&&D&&H&&b.indexOf(z)<0&&!(Hn(_)&&Array.isArray(D))){if(!i.returnObjects&&!this.options.returnObjects){this.options.returnedObjectHandler||this.logger.warn("accessing an object - but returnObjects options is not enabled!");const X=this.options.returnedObjectHandler?this.options.returnedObjectHandler(v,D,{...i,ns:c}):`key '${l} (${this.language})' returned an object instead of string.`;return s?(f.res=X,f.usedParams=this.getUsedParamsDetails(i),f):X}if(o){const X=Array.isArray(D),L=X?[]:{},te=X?g:v;for(const ie in D)if(Object.prototype.hasOwnProperty.call(D,ie)){const J=`${te}${o}${ie}`;N&&!x?L[ie]=this.translate(J,{...i,defaultValue:fM(k)?k[ie]:void 0,joinArrays:!1,ns:c}):L[ie]=this.translate(J,{...i,joinArrays:!1,ns:c}),L[ie]===J&&(L[ie]=D[ie])}x=L}}else if(C&&Hn(_)&&Array.isArray(x))x=x.join(_),x&&(x=this.extendTranslation(x,e,i,r));else{let X=!1,L=!1;!this.isValidLookup(x)&&N&&(X=!0,x=k),this.isValidLookup(x)||(L=!0,x=l);const ie=(i.missingKeyNoValueFallbackToKey||this.options.missingKeyNoValueFallbackToKey)&&L?void 0:x,J=N&&k!==x&&this.options.updateMissing;if(L||X||J){if(this.logger.log(J?"updateKey":"missingKey",m,d,l,J?k:x),o){const W=this.resolve(l,{...i,keySeparator:!1});W&&W.res&&this.logger.warn("Seems the loaded translations were in flat JSON format instead of nested. Either set keySeparator: false on init or make sure your translations are published in nested format.")}let ue=[];const oe=this.languageUtils.getFallbackCodes(this.options.fallbackLng,i.lng||this.language);if(this.options.saveMissingTo==="fallback"&&oe&&oe[0])for(let W=0;W{const xe=N&&ce!==x?ce:ie;this.options.missingKeyHandler?this.options.missingKeyHandler(W,d,ne,xe,J,i):this.backendConnector?.saveMissing&&this.backendConnector.saveMissing(W,d,ne,xe,J,i),this.emit("missingKey",W,d,ne,x)};this.options.saveMissing&&(this.options.saveMissingPlurals&&P?ue.forEach(W=>{const ne=this.pluralResolver.getSuffixes(W,i);F&&i[`defaultValue${this.options.pluralSeparator}zero`]&&ne.indexOf(`${this.options.pluralSeparator}zero`)<0&&ne.push(`${this.options.pluralSeparator}zero`),ne.forEach(ce=>{le([W],l+ce,i[`defaultValue${ce}`]||k)})}):le(ue,l,k))}x=this.extendTranslation(x,e,i,f,r),L&&x===l&&this.options.appendNamespaceToMissingKey&&(x=`${d}${u}${l}`),(L||X)&&this.options.parseMissingKeyHandler&&(x=this.options.parseMissingKeyHandler(this.options.appendNamespaceToMissingKey?`${d}${u}${l}`:l,X?x:void 0,i))}return s?(f.res=x,f.usedParams=this.getUsedParamsDetails(i),f):x}extendTranslation(e,n,r,i,s){if(this.i18nFormat?.parse)e=this.i18nFormat.parse(e,{...this.options.interpolation.defaultVariables,...r},r.lng||this.language||i.usedLng,i.usedNS,i.usedKey,{resolved:i});else if(!r.skipInterpolation){r.interpolation&&this.interpolator.init({...r,interpolation:{...this.options.interpolation,...r.interpolation}});const c=Hn(e)&&(r?.interpolation?.skipOnVariables!==void 0?r.interpolation.skipOnVariables:this.options.interpolation.skipOnVariables);let d;if(c){const m=e.match(this.interpolator.nestingRegexp);d=m&&m.length}let u=r.replace&&!Hn(r.replace)?r.replace:r;if(this.options.interpolation.defaultVariables&&(u={...this.options.interpolation.defaultVariables,...u}),e=this.interpolator.interpolate(e,u,r.lng||this.language||i.usedLng,r),c){const m=e.match(this.interpolator.nestingRegexp),p=m&&m.length;ds?.[0]===m[0]&&!r.context?(this.logger.warn(`It seems you are nesting recursively key: ${m[0]} in key: ${n[0]}`),null):this.translate(...m,n),r)),r.interpolation&&this.interpolator.reset()}const o=r.postProcess||this.options.postProcess,l=Hn(o)?[o]:o;return e!=null&&l?.length&&r.applyPostProcessor!==!1&&(e=IY.handle(l,e,n,this.options&&this.options.postProcessPassResolved?{i18nResolved:{...i,usedParams:this.getUsedParamsDetails(r)},...r}:r,this)),e}resolve(e,n={}){let r,i,s,o,l;return Hn(e)&&(e=[e]),e.forEach(c=>{if(this.isValidLookup(r))return;const d=this.extractFromKey(c,n),u=d.key;i=u;let m=d.namespaces;this.options.fallbackNS&&(m=m.concat(this.options.fallbackNS));const p=n.count!==void 0&&!Hn(n.count),f=p&&!n.ordinal&&n.count===0,x=n.context!==void 0&&(Hn(n.context)||typeof n.context=="number")&&n.context!=="",v=n.lngs?n.lngs:this.languageUtils.toResolveHierarchy(n.lng||this.language,n.fallbackLng);m.forEach(g=>{this.isValidLookup(r)||(l=g,!U8[`${v[0]}-${g}`]&&this.utils?.hasLoadedNamespace&&!this.utils?.hasLoadedNamespace(l)&&(U8[`${v[0]}-${g}`]=!0,this.logger.warn(`key "${i}" for languages "${v.join(", ")}" won't get resolved as namespace "${l}" was not yet loaded`,"This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!")),v.forEach(b=>{if(this.isValidLookup(r))return;o=b;const _=[u];if(this.i18nFormat?.addLookupKeys)this.i18nFormat.addLookupKeys(_,u,b,g,n);else{let P;p&&(P=this.pluralResolver.getSuffix(b,n.count,n));const N=`${this.options.pluralSeparator}zero`,A=`${this.options.pluralSeparator}ordinal${this.options.pluralSeparator}`;if(p&&(n.ordinal&&P.indexOf(A)===0&&_.push(u+P.replace(A,this.options.pluralSeparator)),_.push(u+P),f&&_.push(u+N)),x){const T=`${u}${this.options.contextSeparator||"_"}${n.context}`;_.push(T),p&&(n.ordinal&&P.indexOf(A)===0&&_.push(T+P.replace(A,this.options.pluralSeparator)),_.push(T+P),f&&_.push(T+N))}}let C;for(;C=_.pop();)this.isValidLookup(r)||(s=C,r=this.getResource(b,g,C,n))}))})}),{res:r,usedKey:i,exactUsedKey:s,usedLng:o,usedNS:l}}isValidLookup(e){return e!==void 0&&!(!this.options.returnNull&&e===null)&&!(!this.options.returnEmptyString&&e==="")}getResource(e,n,r,i={}){return this.i18nFormat?.getResource?this.i18nFormat.getResource(e,n,r,i):this.resourceStore.getResource(e,n,r,i)}getUsedParamsDetails(e={}){const n=["defaultValue","ordinal","context","replace","lng","lngs","fallbackLng","ns","keySeparator","nsSeparator","returnObjects","returnDetails","joinArrays","postProcess","interpolation"],r=e.replace&&!Hn(e.replace);let i=r?e.replace:e;if(r&&typeof e.count<"u"&&(i.count=e.count),this.options.interpolation.defaultVariables&&(i={...this.options.interpolation.defaultVariables,...i}),!r){i={...i};for(const s of n)delete i[s]}return i}static hasDefaultValue(e){const n="defaultValue";for(const r in e)if(Object.prototype.hasOwnProperty.call(e,r)&&n===r.substring(0,n.length)&&e[r]!==void 0)return!0;return!1}}class B8{constructor(e){this.options=e,this.supportedLngs=this.options.supportedLngs||!1,this.logger=Cd.create("languageUtils")}getScriptPartFromCode(e){if(e=G0(e),!e||e.indexOf("-")<0)return null;const n=e.split("-");return n.length===2||(n.pop(),n[n.length-1].toLowerCase()==="x")?null:this.formatLanguageCode(n.join("-"))}getLanguagePartFromCode(e){if(e=G0(e),!e||e.indexOf("-")<0)return e;const n=e.split("-");return this.formatLanguageCode(n[0])}formatLanguageCode(e){if(Hn(e)&&e.indexOf("-")>-1){let n;try{n=Intl.getCanonicalLocales(e)[0]}catch{}return n&&this.options.lowerCaseLng&&(n=n.toLowerCase()),n||(this.options.lowerCaseLng?e.toLowerCase():e)}return this.options.cleanCode||this.options.lowerCaseLng?e.toLowerCase():e}isSupportedCode(e){return(this.options.load==="languageOnly"||this.options.nonExplicitSupportedLngs)&&(e=this.getLanguagePartFromCode(e)),!this.supportedLngs||!this.supportedLngs.length||this.supportedLngs.indexOf(e)>-1}getBestMatchFromCodes(e){if(!e)return null;let n;return e.forEach(r=>{if(n)return;const i=this.formatLanguageCode(r);(!this.options.supportedLngs||this.isSupportedCode(i))&&(n=i)}),!n&&this.options.supportedLngs&&e.forEach(r=>{if(n)return;const i=this.getScriptPartFromCode(r);if(this.isSupportedCode(i))return n=i;const s=this.getLanguagePartFromCode(r);if(this.isSupportedCode(s))return n=s;n=this.options.supportedLngs.find(o=>{if(o===s)return o;if(!(o.indexOf("-")<0&&s.indexOf("-")<0)&&(o.indexOf("-")>0&&s.indexOf("-")<0&&o.substring(0,o.indexOf("-"))===s||o.indexOf(s)===0&&s.length>1))return o})}),n||(n=this.getFallbackCodes(this.options.fallbackLng)[0]),n}getFallbackCodes(e,n){if(!e)return[];if(typeof e=="function"&&(e=e(n)),Hn(e)&&(e=[e]),Array.isArray(e))return e;if(!n)return e.default||[];let r=e[n];return r||(r=e[this.getScriptPartFromCode(n)]),r||(r=e[this.formatLanguageCode(n)]),r||(r=e[this.getLanguagePartFromCode(n)]),r||(r=e.default),r||[]}toResolveHierarchy(e,n){const r=this.getFallbackCodes((n===!1?[]:n)||this.options.fallbackLng||[],e),i=[],s=o=>{o&&(this.isSupportedCode(o)?i.push(o):this.logger.warn(`rejecting language code not found in supportedLngs: ${o}`))};return Hn(e)&&(e.indexOf("-")>-1||e.indexOf("_")>-1)?(this.options.load!=="languageOnly"&&s(this.formatLanguageCode(e)),this.options.load!=="languageOnly"&&this.options.load!=="currentOnly"&&s(this.getScriptPartFromCode(e)),this.options.load!=="currentOnly"&&s(this.getLanguagePartFromCode(e))):Hn(e)&&s(this.formatLanguageCode(e)),r.forEach(o=>{i.indexOf(o)<0&&s(this.formatLanguageCode(o))}),i}}const H8={zero:0,one:1,two:2,few:3,many:4,other:5},q8={select:t=>t===1?"one":"other",resolvedOptions:()=>({pluralCategories:["one","other"]})};class nue{constructor(e,n={}){this.languageUtils=e,this.options=n,this.logger=Cd.create("pluralResolver"),this.pluralRulesCache={}}addRule(e,n){this.rules[e]=n}clearCache(){this.pluralRulesCache={}}getRule(e,n={}){const r=G0(e==="dev"?"en":e),i=n.ordinal?"ordinal":"cardinal",s=JSON.stringify({cleanedCode:r,type:i});if(s in this.pluralRulesCache)return this.pluralRulesCache[s];let o;try{o=new Intl.PluralRules(r,{type:i})}catch{if(!Intl)return this.logger.error("No Intl support, please use an Intl polyfill!"),q8;if(!e.match(/-|_/))return q8;const c=this.languageUtils.getLanguagePartFromCode(e);o=this.getRule(c,n)}return this.pluralRulesCache[s]=o,o}needsPlural(e,n={}){let r=this.getRule(e,n);return r||(r=this.getRule("dev",n)),r?.resolvedOptions().pluralCategories.length>1}getPluralFormsOfKey(e,n,r={}){return this.getSuffixes(e,r).map(i=>`${n}${i}`)}getSuffixes(e,n={}){let r=this.getRule(e,n);return r||(r=this.getRule("dev",n)),r?r.resolvedOptions().pluralCategories.sort((i,s)=>H8[i]-H8[s]).map(i=>`${this.options.prepend}${n.ordinal?`ordinal${this.options.prepend}`:""}${i}`):[]}getSuffix(e,n,r={}){const i=this.getRule(e,r);return i?`${this.options.prepend}${r.ordinal?`ordinal${this.options.prepend}`:""}${i.select(n)}`:(this.logger.warn(`no plural rule found for: ${e}`),this.getSuffix("dev",n,r))}}const $8=(t,e,n,r=".",i=!0)=>{let s=Wde(t,e,n);return!s&&i&&Hn(n)&&(s=R3(t,n,r),s===void 0&&(s=R3(e,n,r))),s},gM=t=>t.replace(/\$/g,"$$$$");class rue{constructor(e={}){this.logger=Cd.create("interpolator"),this.options=e,this.format=e?.interpolation?.format||(n=>n),this.init(e)}init(e={}){e.interpolation||(e.interpolation={escapeValue:!0});const{escape:n,escapeValue:r,useRawValueToEscape:i,prefix:s,prefixEscaped:o,suffix:l,suffixEscaped:c,formatSeparator:d,unescapeSuffix:u,unescapePrefix:m,nestingPrefix:p,nestingPrefixEscaped:f,nestingSuffix:x,nestingSuffixEscaped:v,nestingOptionsSeparator:g,maxReplaces:b,alwaysFormat:_}=e.interpolation;this.escape=n!==void 0?n:Xde,this.escapeValue=r!==void 0?r:!0,this.useRawValueToEscape=i!==void 0?i:!1,this.prefix=s?ub(s):o||"{{",this.suffix=l?ub(l):c||"}}",this.formatSeparator=d||",",this.unescapePrefix=u?"":m||"-",this.unescapeSuffix=this.unescapePrefix?"":u||"",this.nestingPrefix=p?ub(p):f||ub("$t("),this.nestingSuffix=x?ub(x):v||ub(")"),this.nestingOptionsSeparator=g||",",this.maxReplaces=b||1e3,this.alwaysFormat=_!==void 0?_:!1,this.resetRegExp()}reset(){this.options&&this.init(this.options)}resetRegExp(){const e=(n,r)=>n?.source===r?(n.lastIndex=0,n):new RegExp(r,"g");this.regexp=e(this.regexp,`${this.prefix}(.+?)${this.suffix}`),this.regexpUnescape=e(this.regexpUnescape,`${this.prefix}${this.unescapePrefix}(.+?)${this.unescapeSuffix}${this.suffix}`),this.nestingRegexp=e(this.nestingRegexp,`${this.nestingPrefix}((?:[^()"']+|"[^"]*"|'[^']*'|\\((?:[^()]|"[^"]*"|'[^']*')*\\))*?)${this.nestingSuffix}`)}interpolate(e,n,r,i){let s,o,l;const c=this.options&&this.options.interpolation&&this.options.interpolation.defaultVariables||{},d=f=>{if(f.indexOf(this.formatSeparator)<0){const b=$8(n,c,f,this.options.keySeparator,this.options.ignoreJSONStructure);return this.alwaysFormat?this.format(b,void 0,r,{...i,...n,interpolationkey:f}):b}const x=f.split(this.formatSeparator),v=x.shift().trim(),g=x.join(this.formatSeparator).trim();return this.format($8(n,c,v,this.options.keySeparator,this.options.ignoreJSONStructure),g,r,{...i,...n,interpolationkey:v})};this.resetRegExp();const u=i?.missingInterpolationHandler||this.options.missingInterpolationHandler,m=i?.interpolation?.skipOnVariables!==void 0?i.interpolation.skipOnVariables:this.options.interpolation.skipOnVariables;return[{regex:this.regexpUnescape,safeValue:f=>gM(f)},{regex:this.regexp,safeValue:f=>this.escapeValue?gM(this.escape(f)):gM(f)}].forEach(f=>{for(l=0;s=f.regex.exec(e);){const x=s[1].trim();if(o=d(x),o===void 0)if(typeof u=="function"){const g=u(e,s,i);o=Hn(g)?g:""}else if(i&&Object.prototype.hasOwnProperty.call(i,x))o="";else if(m){o=s[0];continue}else this.logger.warn(`missed to pass in variable ${x} for interpolating ${e}`),o="";else!Hn(o)&&!this.useRawValueToEscape&&(o=R8(o));const v=f.safeValue(o);if(e=e.replace(s[0],v),m?(f.regex.lastIndex+=o.length,f.regex.lastIndex-=s[0].length):f.regex.lastIndex=0,l++,l>=this.maxReplaces)break}}),e}nest(e,n,r={}){let i,s,o;const l=(c,d)=>{const u=this.nestingOptionsSeparator;if(c.indexOf(u)<0)return c;const m=c.split(new RegExp(`${u}[ ]*{`));let p=`{${m[1]}`;c=m[0],p=this.interpolate(p,o);const f=p.match(/'/g),x=p.match(/"/g);((f?.length??0)%2===0&&!x||x.length%2!==0)&&(p=p.replace(/'/g,'"'));try{o=JSON.parse(p),d&&(o={...d,...o})}catch(v){return this.logger.warn(`failed parsing options string in nesting for key ${c}`,v),`${c}${u}${p}`}return o.defaultValue&&o.defaultValue.indexOf(this.prefix)>-1&&delete o.defaultValue,c};for(;i=this.nestingRegexp.exec(e);){let c=[];o={...r},o=o.replace&&!Hn(o.replace)?o.replace:o,o.applyPostProcessor=!1,delete o.defaultValue;const d=/{.*}/.test(i[1])?i[1].lastIndexOf("}")+1:i[1].indexOf(this.formatSeparator);if(d!==-1&&(c=i[1].slice(d).split(this.formatSeparator).map(u=>u.trim()).filter(Boolean),i[1]=i[1].slice(0,d)),s=n(l.call(this,i[1].trim(),o),o),s&&i[0]===e&&!Hn(s))return s;Hn(s)||(s=R8(s)),s||(this.logger.warn(`missed to resolve ${i[1]} for nesting ${e}`),s=""),c.length&&(s=c.reduce((u,m)=>this.format(u,m,r.lng,{...r,interpolationkey:i[1].trim()}),s.trim())),e=e.replace(i[0],s),this.regexp.lastIndex=0}return e}}const aue=t=>{let e=t.toLowerCase().trim();const n={};if(t.indexOf("(")>-1){const r=t.split("(");e=r[0].toLowerCase().trim();const i=r[1].substring(0,r[1].length-1);e==="currency"&&i.indexOf(":")<0?n.currency||(n.currency=i.trim()):e==="relativetime"&&i.indexOf(":")<0?n.range||(n.range=i.trim()):i.split(";").forEach(o=>{if(o){const[l,...c]=o.split(":"),d=c.join(":").trim().replace(/^'+|'+$/g,""),u=l.trim();n[u]||(n[u]=d),d==="false"&&(n[u]=!1),d==="true"&&(n[u]=!0),isNaN(d)||(n[u]=parseInt(d,10))}})}return{formatName:e,formatOptions:n}},V8=t=>{const e={};return(n,r,i)=>{let s=i;i&&i.interpolationkey&&i.formatParams&&i.formatParams[i.interpolationkey]&&i[i.interpolationkey]&&(s={...s,[i.interpolationkey]:void 0});const o=r+JSON.stringify(s);let l=e[o];return l||(l=t(G0(r),i),e[o]=l),l(n)}},iue=t=>(e,n,r)=>t(G0(n),r)(e);class sue{constructor(e={}){this.logger=Cd.create("formatter"),this.options=e,this.init(e)}init(e,n={interpolation:{}}){this.formatSeparator=n.interpolation.formatSeparator||",";const r=n.cacheInBuiltFormats?V8:iue;this.formats={number:r((i,s)=>{const o=new Intl.NumberFormat(i,{...s});return l=>o.format(l)}),currency:r((i,s)=>{const o=new Intl.NumberFormat(i,{...s,style:"currency"});return l=>o.format(l)}),datetime:r((i,s)=>{const o=new Intl.DateTimeFormat(i,{...s});return l=>o.format(l)}),relativetime:r((i,s)=>{const o=new Intl.RelativeTimeFormat(i,{...s});return l=>o.format(l,s.range||"day")}),list:r((i,s)=>{const o=new Intl.ListFormat(i,{...s});return l=>o.format(l)})}}add(e,n){this.formats[e.toLowerCase().trim()]=n}addCached(e,n){this.formats[e.toLowerCase().trim()]=V8(n)}format(e,n,r,i={}){const s=n.split(this.formatSeparator);if(s.length>1&&s[0].indexOf("(")>1&&s[0].indexOf(")")<0&&s.find(l=>l.indexOf(")")>-1)){const l=s.findIndex(c=>c.indexOf(")")>-1);s[0]=[s[0],...s.splice(1,l)].join(this.formatSeparator)}return s.reduce((l,c)=>{const{formatName:d,formatOptions:u}=aue(c);if(this.formats[d]){let m=l;try{const p=i?.formatParams?.[i.interpolationkey]||{},f=p.locale||p.lng||i.locale||i.lng||r;m=this.formats[d](l,f,{...u,...i,...p})}catch(p){this.logger.warn(p)}return m}else this.logger.warn(`there was no format function for ${d}`);return l},e)}}const oue=(t,e)=>{t.pending[e]!==void 0&&(delete t.pending[e],t.pendingCount--)};class lue extends EP{constructor(e,n,r,i={}){super(),this.backend=e,this.store=n,this.services=r,this.languageUtils=r.languageUtils,this.options=i,this.logger=Cd.create("backendConnector"),this.waitingReads=[],this.maxParallelReads=i.maxParallelReads||10,this.readingCalls=0,this.maxRetries=i.maxRetries>=0?i.maxRetries:5,this.retryTimeout=i.retryTimeout>=1?i.retryTimeout:350,this.state={},this.queue=[],this.backend?.init?.(r,i.backend,i)}queueLoad(e,n,r,i){const s={},o={},l={},c={};return e.forEach(d=>{let u=!0;n.forEach(m=>{const p=`${d}|${m}`;!r.reload&&this.store.hasResourceBundle(d,m)?this.state[p]=2:this.state[p]<0||(this.state[p]===1?o[p]===void 0&&(o[p]=!0):(this.state[p]=1,u=!1,o[p]===void 0&&(o[p]=!0),s[p]===void 0&&(s[p]=!0),c[m]===void 0&&(c[m]=!0)))}),u||(l[d]=!0)}),(Object.keys(s).length||Object.keys(o).length)&&this.queue.push({pending:o,pendingCount:Object.keys(o).length,loaded:{},errors:[],callback:i}),{toLoad:Object.keys(s),pending:Object.keys(o),toLoadLanguages:Object.keys(l),toLoadNamespaces:Object.keys(c)}}loaded(e,n,r){const i=e.split("|"),s=i[0],o=i[1];n&&this.emit("failedLoading",s,o,n),!n&&r&&this.store.addResourceBundle(s,o,r,void 0,void 0,{skipCopy:!0}),this.state[e]=n?-1:2,n&&r&&(this.state[e]=0);const l={};this.queue.forEach(c=>{Gde(c.loaded,[s],o),oue(c,e),n&&c.errors.push(n),c.pendingCount===0&&!c.done&&(Object.keys(c.loaded).forEach(d=>{l[d]||(l[d]={});const u=c.loaded[d];u.length&&u.forEach(m=>{l[d][m]===void 0&&(l[d][m]=!0)})}),c.done=!0,c.errors.length?c.callback(c.errors):c.callback())}),this.emit("loaded",l),this.queue=this.queue.filter(c=>!c.done)}read(e,n,r,i=0,s=this.retryTimeout,o){if(!e.length)return o(null,{});if(this.readingCalls>=this.maxParallelReads){this.waitingReads.push({lng:e,ns:n,fcName:r,tried:i,wait:s,callback:o});return}this.readingCalls++;const l=(d,u)=>{if(this.readingCalls--,this.waitingReads.length>0){const m=this.waitingReads.shift();this.read(m.lng,m.ns,m.fcName,m.tried,m.wait,m.callback)}if(d&&u&&i{this.read.call(this,e,n,r,i+1,s*2,o)},s);return}o(d,u)},c=this.backend[r].bind(this.backend);if(c.length===2){try{const d=c(e,n);d&&typeof d.then=="function"?d.then(u=>l(null,u)).catch(l):l(null,d)}catch(d){l(d)}return}return c(e,n,l)}prepareLoading(e,n,r={},i){if(!this.backend)return this.logger.warn("No backend was added via i18next.use. Will not load resources."),i&&i();Hn(e)&&(e=this.languageUtils.toResolveHierarchy(e)),Hn(n)&&(n=[n]);const s=this.queueLoad(e,n,r,i);if(!s.toLoad.length)return s.pending.length||i(),null;s.toLoad.forEach(o=>{this.loadOne(o)})}load(e,n,r){this.prepareLoading(e,n,{},r)}reload(e,n,r){this.prepareLoading(e,n,{reload:!0},r)}loadOne(e,n=""){const r=e.split("|"),i=r[0],s=r[1];this.read(i,s,"read",void 0,void 0,(o,l)=>{o&&this.logger.warn(`${n}loading namespace ${s} for language ${i} failed`,o),!o&&l&&this.logger.log(`${n}loaded namespace ${s} for language ${i}`,l),this.loaded(e,o,l)})}saveMissing(e,n,r,i,s,o={},l=()=>{}){if(this.services?.utils?.hasLoadedNamespace&&!this.services?.utils?.hasLoadedNamespace(n)){this.logger.warn(`did not save key "${r}" as the namespace "${n}" was not yet loaded`,"This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!");return}if(!(r==null||r==="")){if(this.backend?.create){const c={...o,isUpdate:s},d=this.backend.create.bind(this.backend);if(d.length<6)try{let u;d.length===5?u=d(e,n,r,i,c):u=d(e,n,r,i),u&&typeof u.then=="function"?u.then(m=>l(null,m)).catch(l):l(null,u)}catch(u){l(u)}else d(e,n,r,i,l,c)}!e||!e[0]||this.store.addResource(e[0],n,r,i)}}}const G8=()=>({debug:!1,initAsync:!0,ns:["translation"],defaultNS:["translation"],fallbackLng:["dev"],fallbackNS:!1,supportedLngs:!1,nonExplicitSupportedLngs:!1,load:"all",preload:!1,simplifyPluralSuffix:!0,keySeparator:".",nsSeparator:":",pluralSeparator:"_",contextSeparator:"_",partialBundledLanguages:!1,saveMissing:!1,updateMissing:!1,saveMissingTo:"fallback",saveMissingPlurals:!0,missingKeyHandler:!1,missingInterpolationHandler:!1,postProcess:!1,postProcessPassResolved:!1,returnNull:!1,returnEmptyString:!0,returnObjects:!1,joinArrays:!1,returnedObjectHandler:!1,parseMissingKeyHandler:!1,appendNamespaceToMissingKey:!1,appendNamespaceToCIMode:!1,overloadTranslationOptionHandler:t=>{let e={};if(typeof t[1]=="object"&&(e=t[1]),Hn(t[1])&&(e.defaultValue=t[1]),Hn(t[2])&&(e.tDescription=t[2]),typeof t[2]=="object"||typeof t[3]=="object"){const n=t[3]||t[2];Object.keys(n).forEach(r=>{e[r]=n[r]})}return e},interpolation:{escapeValue:!0,format:t=>t,prefix:"{{",suffix:"}}",formatSeparator:",",unescapePrefix:"-",nestingPrefix:"$t(",nestingSuffix:")",nestingOptionsSeparator:",",maxReplaces:1e3,skipOnVariables:!0},cacheInBuiltFormats:!0}),W8=t=>(Hn(t.ns)&&(t.ns=[t.ns]),Hn(t.fallbackLng)&&(t.fallbackLng=[t.fallbackLng]),Hn(t.fallbackNS)&&(t.fallbackNS=[t.fallbackNS]),t.supportedLngs?.indexOf?.("cimode")<0&&(t.supportedLngs=t.supportedLngs.concat(["cimode"])),typeof t.initImmediate=="boolean"&&(t.initAsync=t.initImmediate),t),B_=()=>{},cue=t=>{Object.getOwnPropertyNames(Object.getPrototypeOf(t)).forEach(n=>{typeof t[n]=="function"&&(t[n]=t[n].bind(t))})};class v0 extends EP{constructor(e={},n){if(super(),this.options=W8(e),this.services={},this.logger=Cd,this.modules={external:[]},cue(this),n&&!this.isInitialized&&!e.isClone){if(!this.options.initAsync)return this.init(e,n),this;setTimeout(()=>{this.init(e,n)},0)}}init(e={},n){this.isInitializing=!0,typeof e=="function"&&(n=e,e={}),e.defaultNS==null&&e.ns&&(Hn(e.ns)?e.defaultNS=e.ns:e.ns.indexOf("translation")<0&&(e.defaultNS=e.ns[0]));const r=G8();this.options={...r,...this.options,...W8(e)},this.options.interpolation={...r.interpolation,...this.options.interpolation},e.keySeparator!==void 0&&(this.options.userDefinedKeySeparator=e.keySeparator),e.nsSeparator!==void 0&&(this.options.userDefinedNsSeparator=e.nsSeparator);const i=d=>d?typeof d=="function"?new d:d:null;if(!this.options.isClone){this.modules.logger?Cd.init(i(this.modules.logger),this.options):Cd.init(null,this.options);let d;this.modules.formatter?d=this.modules.formatter:d=sue;const u=new B8(this.options);this.store=new z8(this.options.resources,this.options);const m=this.services;m.logger=Cd,m.resourceStore=this.store,m.languageUtils=u,m.pluralResolver=new nue(u,{prepend:this.options.pluralSeparator,simplifyPluralSuffix:this.options.simplifyPluralSuffix}),this.options.interpolation.format&&this.options.interpolation.format!==r.interpolation.format&&this.logger.deprecate("init: you are still using the legacy format function, please use the new approach: https://www.i18next.com/translation-function/formatting"),d&&(!this.options.interpolation.format||this.options.interpolation.format===r.interpolation.format)&&(m.formatter=i(d),m.formatter.init&&m.formatter.init(m,this.options),this.options.interpolation.format=m.formatter.format.bind(m.formatter)),m.interpolator=new rue(this.options),m.utils={hasLoadedNamespace:this.hasLoadedNamespace.bind(this)},m.backendConnector=new lue(i(this.modules.backend),m.resourceStore,m,this.options),m.backendConnector.on("*",(f,...x)=>{this.emit(f,...x)}),this.modules.languageDetector&&(m.languageDetector=i(this.modules.languageDetector),m.languageDetector.init&&m.languageDetector.init(m,this.options.detection,this.options)),this.modules.i18nFormat&&(m.i18nFormat=i(this.modules.i18nFormat),m.i18nFormat.init&&m.i18nFormat.init(this)),this.translator=new lN(this.services,this.options),this.translator.on("*",(f,...x)=>{this.emit(f,...x)}),this.modules.external.forEach(f=>{f.init&&f.init(this)})}if(this.format=this.options.interpolation.format,n||(n=B_),this.options.fallbackLng&&!this.services.languageDetector&&!this.options.lng){const d=this.services.languageUtils.getFallbackCodes(this.options.fallbackLng);d.length>0&&d[0]!=="dev"&&(this.options.lng=d[0])}!this.services.languageDetector&&!this.options.lng&&this.logger.warn("init: no languageDetector is used and no lng is defined"),["getResource","hasResourceBundle","getResourceBundle","getDataByLanguage"].forEach(d=>{this[d]=(...u)=>this.store[d](...u)}),["addResource","addResources","addResourceBundle","removeResourceBundle"].forEach(d=>{this[d]=(...u)=>(this.store[d](...u),this)});const l=Sv(),c=()=>{const d=(u,m)=>{this.isInitializing=!1,this.isInitialized&&!this.initializedStoreOnce&&this.logger.warn("init: i18next is already initialized. You should call init just once!"),this.isInitialized=!0,this.options.isClone||this.logger.log("initialized",this.options),this.emit("initialized",this.options),l.resolve(m),n(u,m)};if(this.languages&&!this.isInitialized)return d(null,this.t.bind(this));this.changeLanguage(this.options.lng,d)};return this.options.resources||!this.options.initAsync?c():setTimeout(c,0),l}loadResources(e,n=B_){let r=n;const i=Hn(e)?e:this.language;if(typeof e=="function"&&(r=e),!this.options.resources||this.options.partialBundledLanguages){if(i?.toLowerCase()==="cimode"&&(!this.options.preload||this.options.preload.length===0))return r();const s=[],o=l=>{if(!l||l==="cimode")return;this.services.languageUtils.toResolveHierarchy(l).forEach(d=>{d!=="cimode"&&s.indexOf(d)<0&&s.push(d)})};i?o(i):this.services.languageUtils.getFallbackCodes(this.options.fallbackLng).forEach(c=>o(c)),this.options.preload?.forEach?.(l=>o(l)),this.services.backendConnector.load(s,this.options.ns,l=>{!l&&!this.resolvedLanguage&&this.language&&this.setResolvedLanguage(this.language),r(l)})}else r(null)}reloadResources(e,n,r){const i=Sv();return typeof e=="function"&&(r=e,e=void 0),typeof n=="function"&&(r=n,n=void 0),e||(e=this.languages),n||(n=this.options.ns),r||(r=B_),this.services.backendConnector.reload(e,n,s=>{i.resolve(),r(s)}),i}use(e){if(!e)throw new Error("You are passing an undefined module! Please check the object you are passing to i18next.use()");if(!e.type)throw new Error("You are passing a wrong module! Please check the object you are passing to i18next.use()");return e.type==="backend"&&(this.modules.backend=e),(e.type==="logger"||e.log&&e.warn&&e.error)&&(this.modules.logger=e),e.type==="languageDetector"&&(this.modules.languageDetector=e),e.type==="i18nFormat"&&(this.modules.i18nFormat=e),e.type==="postProcessor"&&IY.addPostProcessor(e),e.type==="formatter"&&(this.modules.formatter=e),e.type==="3rdParty"&&this.modules.external.push(e),this}setResolvedLanguage(e){if(!(!e||!this.languages)&&!(["cimode","dev"].indexOf(e)>-1)){for(let n=0;n-1)&&this.store.hasLanguageSomeTranslations(r)){this.resolvedLanguage=r;break}}!this.resolvedLanguage&&this.languages.indexOf(e)<0&&this.store.hasLanguageSomeTranslations(e)&&(this.resolvedLanguage=e,this.languages.unshift(e))}}changeLanguage(e,n){this.isLanguageChangingTo=e;const r=Sv();this.emit("languageChanging",e);const i=l=>{this.language=l,this.languages=this.services.languageUtils.toResolveHierarchy(l),this.resolvedLanguage=void 0,this.setResolvedLanguage(l)},s=(l,c)=>{c?this.isLanguageChangingTo===e&&(i(c),this.translator.changeLanguage(c),this.isLanguageChangingTo=void 0,this.emit("languageChanged",c),this.logger.log("languageChanged",c)):this.isLanguageChangingTo=void 0,r.resolve((...d)=>this.t(...d)),n&&n(l,(...d)=>this.t(...d))},o=l=>{!e&&!l&&this.services.languageDetector&&(l=[]);const c=Hn(l)?l:l&&l[0],d=this.store.hasLanguageSomeTranslations(c)?c:this.services.languageUtils.getBestMatchFromCodes(Hn(l)?[l]:l);d&&(this.language||i(d),this.translator.language||this.translator.changeLanguage(d),this.services.languageDetector?.cacheUserLanguage?.(d)),this.loadResources(d,u=>{s(u,d)})};return!e&&this.services.languageDetector&&!this.services.languageDetector.async?o(this.services.languageDetector.detect()):!e&&this.services.languageDetector&&this.services.languageDetector.async?this.services.languageDetector.detect.length===0?this.services.languageDetector.detect().then(o):this.services.languageDetector.detect(o):o(e),r}getFixedT(e,n,r){const i=(s,o,...l)=>{let c;typeof o!="object"?c=this.options.overloadTranslationOptionHandler([s,o].concat(l)):c={...o},c.lng=c.lng||i.lng,c.lngs=c.lngs||i.lngs,c.ns=c.ns||i.ns,c.keyPrefix!==""&&(c.keyPrefix=c.keyPrefix||r||i.keyPrefix);const d=this.options.keySeparator||".";let u;return c.keyPrefix&&Array.isArray(s)?u=s.map(m=>(typeof m=="function"&&(m=L3(m,{...this.options,...o})),`${c.keyPrefix}${d}${m}`)):(typeof s=="function"&&(s=L3(s,{...this.options,...o})),u=c.keyPrefix?`${c.keyPrefix}${d}${s}`:s),this.t(u,c)};return Hn(e)?i.lng=e:i.lngs=e,i.ns=n,i.keyPrefix=r,i}t(...e){return this.translator?.translate(...e)}exists(...e){return this.translator?.exists(...e)}setDefaultNamespace(e){this.options.defaultNS=e}hasLoadedNamespace(e,n={}){if(!this.isInitialized)return this.logger.warn("hasLoadedNamespace: i18next was not initialized",this.languages),!1;if(!this.languages||!this.languages.length)return this.logger.warn("hasLoadedNamespace: i18n.languages were undefined or empty",this.languages),!1;const r=n.lng||this.resolvedLanguage||this.languages[0],i=this.options?this.options.fallbackLng:!1,s=this.languages[this.languages.length-1];if(r.toLowerCase()==="cimode")return!0;const o=(l,c)=>{const d=this.services.backendConnector.state[`${l}|${c}`];return d===-1||d===0||d===2};if(n.precheck){const l=n.precheck(this,o);if(l!==void 0)return l}return!!(this.hasResourceBundle(r,e)||!this.services.backendConnector.backend||this.options.resources&&!this.options.partialBundledLanguages||o(r,e)&&(!i||o(s,e)))}loadNamespaces(e,n){const r=Sv();return this.options.ns?(Hn(e)&&(e=[e]),e.forEach(i=>{this.options.ns.indexOf(i)<0&&this.options.ns.push(i)}),this.loadResources(i=>{r.resolve(),n&&n(i)}),r):(n&&n(),Promise.resolve())}loadLanguages(e,n){const r=Sv();Hn(e)&&(e=[e]);const i=this.options.preload||[],s=e.filter(o=>i.indexOf(o)<0&&this.services.languageUtils.isSupportedCode(o));return s.length?(this.options.preload=i.concat(s),this.loadResources(o=>{r.resolve(),n&&n(o)}),r):(n&&n(),Promise.resolve())}dir(e){if(e||(e=this.resolvedLanguage||(this.languages?.length>0?this.languages[0]:this.language)),!e)return"rtl";try{const i=new Intl.Locale(e);if(i&&i.getTextInfo){const s=i.getTextInfo();if(s&&s.direction)return s.direction}}catch{}const n=["ar","shu","sqr","ssh","xaa","yhd","yud","aao","abh","abv","acm","acq","acw","acx","acy","adf","ads","aeb","aec","afb","ajp","apc","apd","arb","arq","ars","ary","arz","auz","avl","ayh","ayl","ayn","ayp","bbz","pga","he","iw","ps","pbt","pbu","pst","prp","prd","ug","ur","ydd","yds","yih","ji","yi","hbo","men","xmn","fa","jpr","peo","pes","prs","dv","sam","ckb"],r=this.services?.languageUtils||new B8(G8());return e.toLowerCase().indexOf("-latn")>1?"ltr":n.indexOf(r.getLanguagePartFromCode(e))>-1||e.toLowerCase().indexOf("-arab")>1?"rtl":"ltr"}static createInstance(e={},n){const r=new v0(e,n);return r.createInstance=v0.createInstance,r}cloneInstance(e={},n=B_){const r=e.forkResourceStore;r&&delete e.forkResourceStore;const i={...this.options,...e,isClone:!0},s=new v0(i);if((e.debug!==void 0||e.prefix!==void 0)&&(s.logger=s.logger.clone(e)),["store","services","language"].forEach(l=>{s[l]=this[l]}),s.services={...this.services},s.services.utils={hasLoadedNamespace:s.hasLoadedNamespace.bind(s)},r){const l=Object.keys(this.store.data).reduce((c,d)=>(c[d]={...this.store.data[d]},c[d]=Object.keys(c[d]).reduce((u,m)=>(u[m]={...c[d][m]},u),c[d]),c),{});s.store=new z8(l,i),s.services.resourceStore=s.store}return s.translator=new lN(s.services,i),s.translator.on("*",(l,...c)=>{s.emit(l,...c)}),s.init(i,n),s.translator.options=i,s.translator.backendConnector.services.utils={hasLoadedNamespace:s.hasLoadedNamespace.bind(s)},s}toJSON(){return{options:this.options,store:this.store,language:this.language,languages:this.languages,resolvedLanguage:this.resolvedLanguage}}}const uo=v0.createInstance();uo.createInstance;uo.dir;uo.init;uo.loadResources;uo.reloadResources;uo.use;uo.changeLanguage;uo.getFixedT;uo.t;uo.exists;uo.setDefaultNamespace;uo.hasLoadedNamespace;uo.loadNamespaces;uo.loadLanguages;const due=(t,e,n,r)=>{const i=[n,{code:e,...r||{}}];if(t?.services?.logger?.forward)return t.services.logger.forward(i,"warn","react-i18next::",!0);Xf(i[0])&&(i[0]=`react-i18next:: ${i[0]}`),t?.services?.logger?.warn?t.services.logger.warn(...i):console?.warn&&console.warn(...i)},K8={},UY=(t,e,n,r)=>{Xf(n)&&K8[n]||(Xf(n)&&(K8[n]=new Date),due(t,e,n,r))},BY=(t,e)=>()=>{if(t.isInitialized)e();else{const n=()=>{setTimeout(()=>{t.off("initialized",n)},0),e()};t.on("initialized",n)}},O3=(t,e,n)=>{t.loadNamespaces(e,BY(t,n))},X8=(t,e,n,r)=>{if(Xf(n)&&(n=[n]),t.options.preload&&t.options.preload.indexOf(e)>-1)return O3(t,n,r);n.forEach(i=>{t.options.ns.indexOf(i)<0&&t.options.ns.push(i)}),t.loadLanguages(e,BY(t,r))},uue=(t,e,n={})=>!e.languages||!e.languages.length?(UY(e,"NO_LANGUAGES","i18n.languages were undefined or empty",{languages:e.languages}),!0):e.hasLoadedNamespace(t,{lng:n.lng,precheck:(r,i)=>{if(n.bindI18n&&n.bindI18n.indexOf("languageChanging")>-1&&r.services.backendConnector.backend&&r.isLanguageChangingTo&&!i(r.isLanguageChangingTo,t))return!1}}),Xf=t=>typeof t=="string",mue=t=>typeof t=="object"&&t!==null,hue=/&(?:amp|#38|lt|#60|gt|#62|apos|#39|quot|#34|nbsp|#160|copy|#169|reg|#174|hellip|#8230|#x2F|#47);/g,pue={"&":"&","&":"&","<":"<","<":"<",">":">",">":">","'":"'","'":"'",""":'"',""":'"'," ":" "," ":" ","©":"©","©":"©","®":"®","®":"®","…":"…","…":"…","/":"/","/":"/"},fue=t=>pue[t],gue=t=>t.replace(hue,fue);let I3={bindI18n:"languageChanged",bindI18nStore:"",transEmptyNodeValue:"",transSupportBasicHtmlNodes:!0,transWrapTextNodes:"",transKeepBasicHtmlNodesFor:["br","strong","i","p"],useSuspense:!0,unescape:gue,transDefaultProps:void 0};const bue=(t={})=>{I3={...I3,...t}},xue=()=>I3;let HY;const yue=t=>{HY=t},vue=()=>HY,wue={type:"3rdParty",init(t){bue(t.options.react),yue(t)}},Sue=w.createContext();class _ue{constructor(){this.usedNamespaces={}}addUsedNamespaces(e){e.forEach(n=>{this.usedNamespaces[n]||(this.usedNamespaces[n]=!0)})}getUsedNamespaces(){return Object.keys(this.usedNamespaces)}}var bM={exports:{}},xM={};var Y8;function kue(){if(Y8)return xM;Y8=1;var t=_g();function e(m,p){return m===p&&(m!==0||1/m===1/p)||m!==m&&p!==p}var n=typeof Object.is=="function"?Object.is:e,r=t.useState,i=t.useEffect,s=t.useLayoutEffect,o=t.useDebugValue;function l(m,p){var f=p(),x=r({inst:{value:f,getSnapshot:p}}),v=x[0].inst,g=x[1];return s(function(){v.value=f,v.getSnapshot=p,c(v)&&g({inst:v})},[m,f,p]),i(function(){return c(v)&&g({inst:v}),m(function(){c(v)&&g({inst:v})})},[m]),o(f),f}function c(m){var p=m.getSnapshot;m=m.value;try{var f=p();return!n(m,f)}catch{return!0}}function d(m,p){return p()}var u=typeof window>"u"||typeof window.document>"u"||typeof window.document.createElement>"u"?d:l;return xM.useSyncExternalStore=t.useSyncExternalStore!==void 0?t.useSyncExternalStore:u,xM}var Q8;function qY(){return Q8||(Q8=1,bM.exports=kue()),bM.exports}var sO=qY();const Nue=(t,e)=>Xf(e)?e:mue(e)&&Xf(e.defaultValue)?e.defaultValue:Array.isArray(t)?t[t.length-1]:t,Cue={t:Nue,ready:!1},Pue=()=>()=>{},Rt=(t,e={})=>{const{i18n:n}=e,{i18n:r,defaultNS:i}=w.useContext(Sue)||{},s=n||r||vue();s&&!s.reportNamespaces&&(s.reportNamespaces=new _ue),s||UY(s,"NO_I18NEXT_INSTANCE","useTranslation: You will need to pass in an i18next instance by using initReactI18next");const o=w.useMemo(()=>({...xue(),...s?.options?.react,...e}),[s,e]),{useSuspense:l,keyPrefix:c}=o,d=i||s?.options?.defaultNS,u=Xf(d)?[d]:d||["translation"],m=w.useMemo(()=>u,u);s?.reportNamespaces?.addUsedNamespaces?.(m);const p=w.useRef(0),f=w.useCallback(k=>{if(!s)return Pue;const{bindI18n:D,bindI18nStore:H}=o,z=()=>{p.current+=1,k()};return D&&s.on(D,z),H&&s.store.on(H,z),()=>{D&&D.split(" ").forEach(X=>s.off(X,z)),H&&H.split(" ").forEach(X=>s.store.off(X,z))}},[s,o]),x=w.useRef(),v=w.useCallback(()=>{if(!s)return Cue;const k=!!(s.isInitialized||s.initializedStoreOnce)&&m.every(te=>uue(te,s,o)),D=e.lng||s.language,H=p.current,z=x.current;if(z&&z.ready===k&&z.lng===D&&z.keyPrefix===c&&z.revision===H)return z;const L={t:s.getFixedT(D,o.nsMode==="fallback"?m:m[0],c),ready:k,lng:D,keyPrefix:c,revision:H};return x.current=L,L},[s,m,c,o,e.lng]),[g,b]=w.useState(0),{t:_,ready:C}=sO.useSyncExternalStore(f,v,v);w.useEffect(()=>{if(s&&!C&&!l){const k=()=>b(D=>D+1);e.lng?X8(s,e.lng,m,k):O3(s,m,k)}},[s,e.lng,m,C,l,g]);const P=s||{},N=w.useRef(null),A=w.useRef(),T=k=>{const D=Object.getOwnPropertyDescriptors(k);D.__original&&delete D.__original;const H=Object.create(Object.getPrototypeOf(k),D);if(!Object.prototype.hasOwnProperty.call(H,"__original"))try{Object.defineProperty(H,"__original",{value:k,writable:!1,enumerable:!1,configurable:!1})}catch{}return H},F=w.useMemo(()=>{const k=P,D=k?.language;let H=k;k&&(N.current&&N.current.__original===k?A.current!==D?(H=T(k),N.current=H,A.current=D):H=N.current:(H=T(k),N.current=H,A.current=D));const z=[_,H,C];return z.t=_,z.i18n=H,z.ready=C,z},[_,P,C,P.resolvedLanguage,P.language,P.languages]);if(s&&l&&!C)throw new Promise(k=>{const D=()=>k();e.lng?X8(s,e.lng,m,D):O3(s,m,D)});return F},{slice:Tue,forEach:Aue}=[];function jue(t){return Aue.call(Tue.call(arguments,1),e=>{if(e)for(const n in e)t[n]===void 0&&(t[n]=e[n])}),t}function Mue(t){return typeof t!="string"?!1:[/<\s*script.*?>/i,/<\s*\/\s*script\s*>/i,/<\s*img.*?on\w+\s*=/i,/<\s*\w+\s*on\w+\s*=.*?>/i,/javascript\s*:/i,/vbscript\s*:/i,/expression\s*\(/i,/eval\s*\(/i,/alert\s*\(/i,/document\.cookie/i,/document\.write\s*\(/i,/window\.location/i,/innerHTML/i].some(n=>n.test(t))}const Z8=/^[\u0009\u0020-\u007e\u0080-\u00ff]+$/,Eue=function(t,e){const r=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{path:"/"},i=encodeURIComponent(e);let s=`${t}=${i}`;if(r.maxAge>0){const o=r.maxAge-0;if(Number.isNaN(o))throw new Error("maxAge should be a Number");s+=`; Max-Age=${Math.floor(o)}`}if(r.domain){if(!Z8.test(r.domain))throw new TypeError("option domain is invalid");s+=`; Domain=${r.domain}`}if(r.path){if(!Z8.test(r.path))throw new TypeError("option path is invalid");s+=`; Path=${r.path}`}if(r.expires){if(typeof r.expires.toUTCString!="function")throw new TypeError("option expires is invalid");s+=`; Expires=${r.expires.toUTCString()}`}if(r.httpOnly&&(s+="; HttpOnly"),r.secure&&(s+="; Secure"),r.sameSite)switch(typeof r.sameSite=="string"?r.sameSite.toLowerCase():r.sameSite){case!0:s+="; SameSite=Strict";break;case"lax":s+="; SameSite=Lax";break;case"strict":s+="; SameSite=Strict";break;case"none":s+="; SameSite=None";break;default:throw new TypeError("option sameSite is invalid")}return r.partitioned&&(s+="; Partitioned"),s},J8={create(t,e,n,r){let i=arguments.length>4&&arguments[4]!==void 0?arguments[4]:{path:"/",sameSite:"strict"};n&&(i.expires=new Date,i.expires.setTime(i.expires.getTime()+n*60*1e3)),r&&(i.domain=r),document.cookie=Eue(t,e,i)},read(t){const e=`${t}=`,n=document.cookie.split(";");for(let r=0;r-1&&(r=window.location.hash.substring(window.location.hash.indexOf("?")));const s=r.substring(1).split("&");for(let o=0;o0&&s[o].substring(0,l)===e&&(n=s[o].substring(l+1))}}return n}},Rue={name:"hash",lookup(t){let{lookupHash:e,lookupFromHashIndex:n}=t,r;if(typeof window<"u"){const{hash:i}=window.location;if(i&&i.length>2){const s=i.substring(1);if(e){const o=s.split("&");for(let l=0;l0&&o[l].substring(0,c)===e&&(r=o[l].substring(c+1))}}if(r)return r;if(!r&&n>-1){const o=i.match(/\/([a-zA-Z-]*)/g);return Array.isArray(o)?o[typeof n=="number"?n:0]?.replace("/",""):void 0}}}return r}};let mb=null;const eH=()=>{if(mb!==null)return mb;try{if(mb=typeof window<"u"&&window.localStorage!==null,!mb)return!1;const t="i18next.translate.boo";window.localStorage.setItem(t,"foo"),window.localStorage.removeItem(t)}catch{mb=!1}return mb};var Lue={name:"localStorage",lookup(t){let{lookupLocalStorage:e}=t;if(e&&eH())return window.localStorage.getItem(e)||void 0},cacheUserLanguage(t,e){let{lookupLocalStorage:n}=e;n&&eH()&&window.localStorage.setItem(n,t)}};let hb=null;const tH=()=>{if(hb!==null)return hb;try{if(hb=typeof window<"u"&&window.sessionStorage!==null,!hb)return!1;const t="i18next.translate.boo";window.sessionStorage.setItem(t,"foo"),window.sessionStorage.removeItem(t)}catch{hb=!1}return hb};var Oue={name:"sessionStorage",lookup(t){let{lookupSessionStorage:e}=t;if(e&&tH())return window.sessionStorage.getItem(e)||void 0},cacheUserLanguage(t,e){let{lookupSessionStorage:n}=e;n&&tH()&&window.sessionStorage.setItem(n,t)}},Iue={name:"navigator",lookup(t){const e=[];if(typeof navigator<"u"){const{languages:n,userLanguage:r,language:i}=navigator;if(n)for(let s=0;s0?e:void 0}},zue={name:"htmlTag",lookup(t){let{htmlTag:e}=t,n;const r=e||(typeof document<"u"?document.documentElement:null);return r&&typeof r.getAttribute=="function"&&(n=r.getAttribute("lang")),n}},Uue={name:"path",lookup(t){let{lookupFromPathIndex:e}=t;if(typeof window>"u")return;const n=window.location.pathname.match(/\/([a-zA-Z-]*)/g);return Array.isArray(n)?n[typeof e=="number"?e:0]?.replace("/",""):void 0}},Bue={name:"subdomain",lookup(t){let{lookupFromSubdomainIndex:e}=t;const n=typeof e=="number"?e+1:1,r=typeof window<"u"&&window.location?.hostname?.match(/^(\w{2,5})\.(([a-z0-9-]{1,63}\.[a-z]{2,6})|localhost)/i);if(r)return r[n]}};let $Y=!1;try{document.cookie,$Y=!0}catch{}const VY=["querystring","cookie","localStorage","sessionStorage","navigator","htmlTag"];$Y||VY.splice(1,1);const Hue=()=>({order:VY,lookupQuerystring:"lng",lookupCookie:"i18next",lookupLocalStorage:"i18nextLng",lookupSessionStorage:"i18nextLng",caches:["localStorage"],excludeCacheFor:["cimode"],convertDetectedLanguage:t=>t});class GY{constructor(e){let n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{};this.type="languageDetector",this.detectors={},this.init(e,n)}init(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{languageUtils:{}},n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{},r=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{};this.services=e,this.options=jue(n,this.options||{},Hue()),typeof this.options.convertDetectedLanguage=="string"&&this.options.convertDetectedLanguage.indexOf("15897")>-1&&(this.options.convertDetectedLanguage=i=>i.replace("-","_")),this.options.lookupFromUrlIndex&&(this.options.lookupFromPathIndex=this.options.lookupFromUrlIndex),this.i18nOptions=r,this.addDetector(Due),this.addDetector(Fue),this.addDetector(Lue),this.addDetector(Oue),this.addDetector(Iue),this.addDetector(zue),this.addDetector(Uue),this.addDetector(Bue),this.addDetector(Rue)}addDetector(e){return this.detectors[e.name]=e,this}detect(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.order,n=[];return e.forEach(r=>{if(this.detectors[r]){let i=this.detectors[r].lookup(this.options);i&&typeof i=="string"&&(i=[i]),i&&(n=n.concat(i))}}),n=n.filter(r=>r!=null&&!Mue(r)).map(r=>this.options.convertDetectedLanguage(r)),this.services&&this.services.languageUtils&&this.services.languageUtils.getBestMatchFromCodes?n:n.length>0?n[0]:null}cacheUserLanguage(e){let n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:this.options.caches;n&&(this.options.excludeCacheFor&&this.options.excludeCacheFor.indexOf(e)>-1||n.forEach(r=>{this.detectors[r]&&this.detectors[r].cacheUserLanguage(e,this.options)}))}}GY.type="languageDetector";const que={nav:{printers:"Printers",archives:"Archives",queue:"Queue",stats:"Statistics",profiles:"Profiles",maintenance:"Maintenance",projects:"Projects",inventory:"Filament",files:"File Manager",notifications:"Notifications",settings:"Settings",system:"System",collapseSidebar:"Collapse sidebar",expandSidebar:"Expand sidebar",update:"Update",updateAvailable:"Update available: v{{version}}",updateAvailableBanner:"Version {{version}} is available!",viewUpdate:"View update",viewOnGithub:"View on GitHub",keyboardShortcuts:"Keyboard shortcuts (?)",switchToLight:"Switch to light mode",switchToDark:"Switch to dark mode",smartSwitches:"Smart Switches",logout:"Logout"},common:{save:"Save",saving:"Saving...",cancel:"Cancel",delete:"Delete",edit:"Edit",add:"Add",close:"Close",confirm:"Confirm",loading:"Loading...",error:"Error",success:"Success",warning:"Warning",enabled:"Enabled",disabled:"Disabled",yes:"Yes",no:"No",on:"On",off:"Off",all:"All",none:"None",search:"Search",filter:"Filter",sort:"Sort",refresh:"Refresh",download:"Download",upload:"Upload",uploading:"Uploading...",uploadFailed:"Upload failed",actions:"Actions",status:"Status",name:"Name",description:"Description",date:"Date",time:"Time",hours:"hours",minutes:"minutes",seconds:"seconds",days:"days",enable:"Enable",disable:"Disable",permissions:"Permissions",noPrinters:"No printers configured",noData:"No data available",linkNotFound:"Link not found",required:"Required",optional:"Optional",dismiss:"Dismiss",apply:"Apply",reset:"Reset",export:"Export",import:"Import",clear:"Clear",selectAll:"Select All",deselectAll:"Deselect All",noChange:"— No change —",unchanged:"Unchanged",unassigned:"Unassigned",unknown:"Unknown",unknownError:"Unknown error",today:"Today",tomorrow:"Tomorrow",asap:"ASAP",overdue:"Overdue",now:"Now",collapse:"Collapse",expand:"Expand",viewArchive:"View archive",viewInFileManager:"View in File Manager",addedBy:"Added by {{username}}",prints:"prints",more:"+{{count}} more",ascending:"Ascending",descending:"Descending",back:"Back",copy:"Copy",copied:"Copied!",printer:"Printer",remove:"Remove",type:"Type",print:"Print",rename:"Rename",move:"Move",create:"Create",duplicate:"Duplicate",left:"Left",right:"Right"},printers:{title:"Printers",addPrinter:"Add Printer",editPrinter:"Edit Printer",deletePrinter:"Delete Printer",printerName:"Printer Name",serialNumber:"Serial Number",ipAddress:"IP Address / Hostname",accessCode:"Access Code",model:"Model",nozzleCount:"Nozzle Count",autoArchive:"Auto Archive",status:{available:"Available",idle:"Idle",printing:"Printing",paused:"Paused",offline:"Offline",problem:"Problem",error:"Error",finished:"Finished",unknown:"Unknown"},temperatures:{nozzle:"Nozzle",bed:"Bed",chamber:"Chamber"},progress:"{{percent}}% complete",timeRemaining:"{{time}} remaining",deleteConfirm:'Are you sure you want to delete "{{name}}"?',maintenanceOk:"Maintenance OK",maintenanceWarning:"{{count}} warning",maintenanceWarning_plural:"{{count}} warnings",maintenanceDue:"{{count}} due",maintenanceDue_plural:"{{count}} due",sort:{name:"Name",status:"Status",model:"Model",location:"Location",ascending:"Sort ascending",descending:"Sort descending"},cardSize:{small:"Small cards",medium:"Medium cards",large:"Large cards",extraLarge:"Extra large cards"},hideOffline:"Hide offline",nextAvailable:"Next available",powerOn:"Power On",offlinePrintersWithPlugs:"Offline printers with smart plugs",noPrintersConfigured:"No printers configured yet",search:"Search printers...",noSearchResults:"No printers match your search or filters",filter:{allStatuses:"All statuses",allLocations:"All locations"},readyToPrint:"Ready to print",external:"External",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Delete print archives",noLabel:"No label",printPreview:"Print preview",width:"Width",height:"Height",noObjectsFound:"No objects found",objectsLoadedOnPrintStart:"Objects are loaded when a print starts",willBeSkipped:"Will be skipped",name:"Name",serialCannotBeChanged:"Serial number cannot be changed",locationHelp:"Used to group printers and filter queue jobs",wifiSignal:{veryWeak:"Very weak",weak:"Weak",fair:"Fair",good:"Good",excellent:"Excellent"},maintenanceUpToDate:"All maintenance up to date - Click to view",chamberLightOn:"Turn on chamber light",chamberLightOff:"Turn off chamber light",files:"Files",browseFiles:"Browse printer files",autoOffAfterPrint:"Auto power-off after print",autoOffExecuted:"Auto-off was executed - turn printer on to reset",hmsErrors:"HMS Errors",viewHmsErrors:"View {{count}} HMS error(s)",resume:"Resume",pause:"Pause",stop:"Stop",camera:"Camera",skipObject:"Skip Object",reconnect:"Reconnect",forceRefresh:"Force Refresh",forceRefreshSuccess:"Refresh requested",mqttDebug:"MQTT Debug",printerInformation:"Printer Information",copyToClipboard:"Copy",copied:"Copied!",state:"State",wifiSignalLabel:"WiFi Signal",developerMode:"Developer Mode",enabled:"Enabled",disabled:"Disabled",addedOn:"Added",sdCard:"SD Card",inserted:"Inserted",notInserted:"Not inserted",totalPrintHours:"Print Hours",activeNozzle:"Active: {{nozzle}} nozzle",nozzleRack:"Nozzle Rack",nozzleDocked:"Docked",nozzleMounted:"Mounted",nozzleActive:"Active",nozzleIdle:"Idle",nozzleDiameter:"Diameter",nozzleType:"Type",nozzleStatus:"Status",nozzleFilament:"Filament",nozzleWear:"Wear",nozzleMaxTemp:"Max Temp",nozzleSerial:"Serial",nozzleHardenedSteel:"Hardened Steel",nozzleStainlessSteel:"Stainless Steel",nozzleTungstenCarbide:"Tungsten Carbide",nozzleFlow:"Flow",nozzleHighFlow:"High Flow",nozzleStandardFlow:"Standard",firmwareUpdate:"Firmware Update",firmwareInstructions:"On the printer's touchscreen, go to",firmwareNav:"Navigate to",settings:"Settings",firmware:"Firmware",discoverPrinters:"Discover Printers",searching:"Searching...",manualEntry:"Manual Entry",addFromCloud:"Add from Cloud",toast:{printerDeleted:"Printer deleted",missingSpoolAssignment:"Print started on {{printer}}. Missing spool assignment for: {{slots}}",printerAdded:"Printer added",printerUpdated:"Printer updated",failedToDelete:"Failed to delete printer",failedToAdd:"Failed to add printer",failedToUpdate:"Failed to update printer",commandSent:"Command sent",failedToSendCommand:"Failed to send command",turnedOn:"{{name}} turned on",failedToPowerOn:"Failed to power on {{name}}",scriptTriggered:"Script triggered",printStopped:"Print stopped",printPaused:"Print paused",printResumed:"Print resumed",referenceDeleted:"Reference deleted",detectionAreaSaved:"Detection area saved",failedToRunScript:"Failed to run script",failedToStopPrint:"Failed to stop print",failedToPausePrint:"Failed to pause print",failedToResumePrint:"Failed to resume print",failedToControlChamberLight:"Failed to control chamber light",failedToSetSpeed:"Failed to set print speed",failedToUpdateSetting:"Failed to update setting",failedToSkipObjects:"Failed to skip objects",failedToRereadRfid:"Failed to re-read RFID",failedToCheckPlate:"Failed to check plate",failedToUpdateLabel:"Failed to update label",failedToDeleteReference:"Failed to delete reference",failedToSaveDetectionArea:"Failed to save detection area",plateCheckEnabled:"Plate check enabled",plateCheckDisabled:"Plate check disabled",calibrationSaved:"Calibration saved!",calibrationFailed:"Calibration failed",rfidRereadInitiated:"RFID re-read initiated"},connection:{connected:"Connected",offline:"Offline"},queue:{inQueue:"{{count}} print in queue",inQueue_plural:"{{count}} prints in queue"},controls:"Controls",rfid:{reread:"Re-read RFID"},bedJog:{title:"Move build plate",bed:"Bed",step:"Step (mm)",up:"Move plate up",down:"Move plate down",disabledWhilePrinting:"Disabled while printing",notHomedTitle:"Printer is not homed",notHomedMessage:"The Z axis has not been homed since the last print. Home Z first for safe positioning, or move anyway — soft endstops will be bypassed.",homeZ:"Home Z",moveAnyway:"Move anyway",homingStarted:"Homing Z axis…"},permission:{noAdd:"You do not have permission to add printers",noEdit:"You do not have permission to edit printers",noDelete:"You do not have permission to delete printers",noControl:"You do not have permission to control printers",noFiles:"You do not have permission to access printer files",noAmsRfid:"You do not have permission to re-read AMS RFID",noSmartPlugControl:"You do not have permission to control smart plugs",noCamera:"You do not have permission to view cameras"},modal:{addTitle:"Add Printer",editTitle:"Edit Printer",myPrinter:"My Printer",selectModel:"Select model...",locationGroup:"Location / Group (optional)",locationPlaceholder:"e.g., Workshop, Office, Basement",autoArchiveLabel:"Auto-archive completed prints",fromPrinterSettings:"From printer settings",modelOptional:"Model (optional)",saveChanges:"Save Changes"},skipObjects:{tooltip:"Skip objects",onlyWhilePrinting:"Skip objects (only while printing)",requiresMultiple:"Skip objects (requires 2+ objects)",title:"Skip Objects",matchIdsInfo:"Match IDs with your printer display",printerShowsIds:"The printer screen shows object IDs on the build plate",skipSelected:"Skip Selected",skipping:"Skipping...",noObjectsSelected:"No objects selected",selectObjectsToSkip:"Select objects you want to skip from the current print",skipped:"skipped",objectsSkipped:"Objects skipped",activeCount:"{{count}} active",waitForLayer:"Wait for layer 2+ to skip objects (currently layer {{layer}})",skip:"Skip",confirmTitle:"Skip Object?",confirmMessage:'Are you sure you want to skip "{{name}}"? This cannot be undone.'},confirm:{deleteTitle:"Delete Printer",deleteMessage:'Are you sure you want to delete "{{name}}"? This will remove all connection settings.',deleteArchivesNote:"All print history for this printer will be permanently deleted.",keepArchivesNote:"Print history will be kept but no longer associated with this printer.",stopTitle:"Stop Print",stopMessage:'Are you sure you want to stop the current print on "{{name}}"? This will cancel the print job.',stopButton:"Stop Print",pauseTitle:"Pause Print",pauseMessage:'Are you sure you want to pause the current print on "{{name}}"?',pauseButton:"Pause Print",resumeTitle:"Resume Print",resumeMessage:'Are you sure you want to resume the print on "{{name}}"?',resumeButton:"Resume Print",powerOnTitle:"Power On Printer",powerOnMessage:'Are you sure you want to turn ON the power for "{{name}}"?',powerOnButton:"Power On",powerOffTitle:"Power Off Printer",powerOffMessage:'Are you sure you want to turn OFF the power for "{{name}}"?',powerOffWarning:'WARNING: "{{name}}" is currently printing! Are you sure you want to turn OFF the power? This will interrupt the print and may damage the printer.',powerOffButton:"Power Off"},bulk:{select:"Select",selectAll:"Select All",selectByLocation:"Select by Location",selected:"{{count}} selected",actions:{stop:"Stop",pause:"Pause",resume:"Resume",clearPlate:"Clear Bed",clearHMS:"Clear Notifications"},confirm:{stopTitle:"Stop {{count}} Prints",stopMessage:"This will cancel active prints on {{count}} printer(s). This action cannot be undone.",stopButton:"Stop All",pauseTitle:"Pause {{count}} Prints",pauseMessage:"This will pause active prints on {{count}} printer(s).",pauseButton:"Pause All",clearPlateTitle:"Clear {{count}} Print Beds",clearPlateMessage:"This will clear the print bed on {{count}} printer(s) and may trigger queued jobs.",clearPlateButton:"Clear All"},success:"{{action}} completed on {{count}} printer(s)",partial:"{{succeeded}} succeeded, {{failed}} failed",noneApplicable:"No selected printers are in the right state for this action",selectByState:"Select by State"},discovery:{title:"Discover Printers",searching:"Searching...",scanning:"Scanning...",scanProgress:"Scanning... {{scanned}}/{{total}}",foundPrinters:"Found {{count}} printer(s)",noPrintersFound:"No printers found",noPrintersFoundSubnet:"No printers found in the specified subnet.",noPrintersFoundNetwork:"No printers found on the network.",allConfigured:"All discovered printers are already configured.",alreadyAdded:"Already added",select:"Select",manualEntry:"Manual Entry",addFromCloud:"Add from Cloud",subnetToScan:"Subnet to scan",dockerNote:"Docker detected. Enter your printer's subnet in CIDR notation. Requires network_mode: host in docker-compose.yml.",scanSubnet:"Scan Subnet for Printers",discoverNetwork:"Discover Printers on Network",scanningSubnet:"Scanning subnet for Bambu printers...",scanningNetwork:"Scanning network...",serialRequired:"Serial required",unknown:"Unknown",failedToStart:"Failed to start discovery"},drying:{start:"Start Drying",stop:"Stop Drying",temperature:"Temperature",duration:"Duration",hours:"hours",timeRemaining:"{{time}} left",active:"Drying",notSupported:"Drying not supported",powerRequired:"Connect AMS power adapter to enable drying",startingDrying:"Starting drying...",stoppingDrying:"Stopping drying...",rotateTray:"Rotate spool during drying"},filaments:"Filaments",openCameraOverlay:"Open camera overlay",openCameraWindow:"Open camera in new window",firmwareUpdateAvailable:"Firmware update available: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Up to date",firmwareUpdateButton:"Update",plateDetection:{noPermission:"You do not have permission to update printers",enabledClick:"Plate check enabled - Click to disable",disabledClick:"Plate check disabled - Click to enable",manageCalibration:"Manage plate detection calibration",calibrationRequired:"Calibration Required",calibrationInstructions:"Please ensure the build plate is completely empty, then click Calibrate.",calibrationDescription:"Calibration captures a reference image of the empty plate. Future checks will compare against this reference to detect objects.",calibrationTip:"Tip: You can store up to 5 calibrations for different plates. The system automatically uses the best match when checking.",plateEmpty:"Plate appears empty",objectsDetected:"Objects detected on plate",confidence:"Confidence",difference:"Difference",analysisPreview:"Analysis preview:",analysisLegend:"Green box = detection area, Red overlay = differences from calibration",savedReferences:"Saved References ({{count}}/{{max}})",deleteReference:"Delete reference",labelPlaceholder:"Label...",clickToEdit:"{{label}} - Click to edit",clickToAddLabel:"Click to add label"},speed:{title:"Print Speed",silent:"Silent (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Airduct Mode",cooling:"Cooling",heating:"Heating"},noSdCard:"No SD",door:{open:"Open",closed:"Closed"},fans:{partCooling:"Part Cooling Fan",auxiliary:"Auxiliary Fan",chamber:"Chamber Fan"},clickToViewHmsErrors:"Click to view HMS errors",estimatedCompletion:"Estimated completion time",plateNumber:"Plate {{number}}",slotOptions:"Slot options",amsPopup:{friendlyName:"AMS Name",friendlyNamePlaceholder:"e.g. AMS Friendly Name",serialNumber:"Serial Number",firmwareVersion:"Firmware",save:"Save",clear:"Clear",noEditPermission:"You do not have permission to rename AMS units"},firmwareModal:{title:"Firmware Update",titleUpToDate:"Firmware Info",currentVersion:"Current:",latestVersion:"Latest:",releaseNotes:"Release Notes",checkingPrereqs:"Checking prerequisites...",sdCardReady:"SD card ready. Click below to upload firmware.",uploadedSuccess:"Firmware uploaded to SD card!",applyInstructions:"To apply the update on your printer:",step1:"On the printer's touchscreen, go to Settings",step2:"Navigate to Firmware",step3:"Select Update from SD card",step4:"The update will take 10-20 minutes",done:"Done",starting:"Starting...",uploadFirmware:"Upload Firmware",uploadFailed:"Failed to start upload: {{error}}",uploadedToast:"Firmware uploaded! Trigger update from printer screen.",availableVersions:"Available versions",usable:"Usable",unavailable:"Unavailable",installed:"Installed",newerBadge:"newer",olderBadge:"older",currentBadge:"current"},accessCodePlaceholder:"Leave empty to keep current",roi:{title:"Detection Area (ROI)",xStart:"X Start",yStart:"Y Start",width:"Width",height:"Height",instruction:"Adjust the detection area to focus on the build plate. The green box in the preview shows the current area."},developerModeWarning:"Developer LAN mode is not enabled on: {{names}}. Some features may not work.",howToEnable:"How to enable",incompatibleFile:"This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}",dropNotPrintable:"Only .gcode and .gcode.3mf files can be printed",dropToPrint:"Drop to print",cannotPrint:"Printer busy"},archives:{title:"Print Archives",searchPlaceholder:"Search archives...",filterByPrinter:"Filter by printer",filterByStatus:"Filter by status",sortBy:"Sort by",sortNewest:"Newest first",sortOldest:"Oldest first",sortName:"Name",sortDuration:"Duration",sortLargest:"Largest first",sortSmallest:"Smallest first",sortSize:"Size",noArchives:"No archives found",noArchivesSearch:"No archives match your search",originalPrintNotVisible:"Original print not visible - try clearing filters",noArchivesYet:"No archives yet",prints:"prints",pagination:{showing:"Showing",to:"to",of:"of",show:"Show",page:"Page",all:"All"},loadingArchives:"Loading archives...",releaseToUpload:"Release to upload",showAll:"Show all",showFavoritesOnly:"Show favorites only",gridView:"Grid view",listView:"List view",calendarView:"Calendar view",logView:"Print Log",manageTags:"Manage Tags",showFailedPrints:"Show failed prints",hideFailedPrints:"Hide failed prints",hideDuplicates:"Hide Duplicates",viewOriginalPrint:"Click to view original print (#{{id}})",printTime:"Print Time",filamentUsed:"Filament Used",cost:"Cost",reprint:"Reprint",preview:"Preview",deleteArchive:"Delete Archive",deleteConfirm:"Are you sure you want to delete this archive?",favorite:"Favorite",unfavorite:"Remove from favorites",viewDetails:"View Details",status:{completed:"Completed",failed:"Failed",stopped:"Stopped"},toast:{source3mfAttached:"Source 3MF attached: {{filename}}",failedUploadSource3mf:"Failed to upload source 3MF",source3mfRemoved:"Source 3MF removed",failedRemoveSource3mf:"Failed to remove source 3MF",f3dAttached:"F3D attached: {{filename}}",failedUploadF3d:"Failed to upload F3D",f3dRemoved:"F3D removed",failedRemoveF3d:"Failed to remove F3D",timelapseAttached:"Timelapse attached: {{filename}}",timelapseAlreadyAttached:"Timelapse already attached",noMatchingTimelapse:"No matching timelapse found",failedScanTimelapse:"Failed to scan for timelapse",failedAttachTimelapse:"Failed to attach timelapse",timelapseRemoved:"Timelapse removed",failedRemoveTimelapse:"Failed to remove timelapse",timelapseUploaded:"Timelapse uploaded: {{filename}}",failedUploadTimelapse:"Failed to upload timelapse",archiveDeleted:"Archive deleted",failedDeleteArchive:"Failed to delete archive",addedToFavorites:"Added to favorites",removedFromFavorites:"Removed from favorites",projectUpdated:"Project updated",failedUpdateProject:"Failed to update project",linkCopied:"Link copied to clipboard",failedCopyLink:"Failed to copy link",photoDeleted:"Photo deleted",failedDeletePhoto:"Failed to delete photo",failedDeleteArchives:"Failed to delete archives",failedUpdateFavorites:"Failed to update favorites",exportDownloaded:"Export downloaded",exportFailed:"Export failed"},menu:{print:"Print",schedule:"Schedule",openInBambuStudio:"Open in Slicer",slice:"Slice",externalLink:"External Link",viewOnMakerWorld:"View on MakerWorld",preview3d:"3D Preview",viewTimelapse:"View Timelapse",scanForTimelapse:"Scan for Timelapse",uploadTimelapse:"Upload Timelapse",removeTimelapse:"Remove Timelapse",downloadSource3mf:"Download Source 3MF",uploadSource3mf:"Upload Source 3MF",replaceSource3mf:"Replace Source 3MF",removeSource3mf:"Remove Source 3MF",uploadF3d:"Upload F3D",replaceF3d:"Replace F3D",downloadF3d:"Download F3D",removeF3d:"Remove F3D",download:"Download",copyDownloadLink:"Copy Download Link",qrCode:"QR Code",viewPhotos:"View Photos",viewPhotosCount:"View Photos ({{count}})",projectPage:"Project Page",addToFavorites:"Add to Favorites",removeFromFavorites:"Remove from Favorites",edit:"Edit",goToProject:"Go to Project: {{name}}",addToProject:"Add to Project",removeFromProject:"Remove from Project",loading:"Loading...",noProjectsAvailable:"No projects available",select:"Select",deselect:"Deselect",delete:"Delete"},permission:{noReprint:"You do not have permission to reprint this archive",noAddToQueue:"You do not have permission to add to queue",noUpdateArchives:"You do not have permission to update archives",noUploadFiles:"You do not have permission to upload files",noDownload:"You do not have permission to download archives",noCopyLink:"You do not have permission to copy download links",noDelete:"You do not have permission to delete this archive",noCreate:"You do not have permission to create archives"},card:{previousPlate:"Previous plate",nextPlate:"Next plate",plateNumber:"Plate {{index}}",moreOptions:"Right-click for more options",addToFavorites:"Add to favorites",removeFromFavorites:"Remove from favorites",cancelled:"cancelled",failed:"failed",duplicate:"duplicate",duplicateTitle:"This model has been printed before",openSource3mf:"Open source 3MF in Bambu Studio (right-click for more options)",downloadF3d:"Download Fusion 360 design file",viewTimelapse:"View timelapse",viewPhoto:"View 1 photo",viewPhotos:"View {{count}} photos",openFolder:"Open folder: {{name}}",slicedFile:"Sliced file - ready to print",sourceFile:"Source file only - no AMS mapping available",gcode:"GCODE",source:"SOURCE",project:"Project: {{name}}",estimated:"Estimated: {{time}}",actual:"Actual: {{time}}",accuracy:"Accuracy: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} layer",layers:"{{count}} layers",object:"{{count}} object",objects:"{{count}} objects",slicedFor:"Sliced for {{model}}",uploadedBy:"Uploaded By",noPermissionReprint:"You do not have permission to reprint",noFileForReprint:"No 3MF file available — the file could not be downloaded from the printer when the print was recorded",noPermissionEdit:"You do not have permission to edit archives",noPermissionDelete:"You do not have permission to delete archives",reprint:"Reprint",schedulePrint:"Schedule Print",schedule:"Schedule",openInBambuStudio:"Open in Slicer",openInBambuStudioToSlice:"Open in Slicer to slice",slice:"Slice",externalLink:"External Link",makerWorld:"MakerWorld: {{designer}}",viewProject:"View project",noExternalLink:"No external link",preview3d:"3D Preview",download:"Download",edit:"Edit",delete:"Delete"},modal:{deleteArchive:"Delete Archive",deleteConfirm:'Are you sure you want to delete "{{name}}"? This action cannot be undone.',deleteButton:"Delete",removeSource3mf:"Remove Source 3MF",removeSource3mfConfirm:'Are you sure you want to remove the source 3MF file from "{{name}}"? This will delete the original slicer project file.',removeButton:"Remove",removeF3d:"Remove F3D",removeF3dConfirm:'Are you sure you want to remove the Fusion 360 design file from "{{name}}"?',removeTimelapse:"Remove Timelapse",removeTimelapseConfirm:'Are you sure you want to remove the timelapse video from "{{name}}"?',timelapse:"{{name}} - Timelapse",selectTimelapse:"Select Timelapse",selectTimelapseDesc:"No auto-match found. Select the timelapse for this print:",deleteArchives:"Delete Archives",deleteArchivesConfirm:"Are you sure you want to delete {{count}} archive(s)? This action cannot be undone.",deleteCount:"Delete {{count}}"},page:{title:"Archives",printsCount:"{{filtered}} of {{total}} prints",dropFilesHere:"Drop .3mf files here",releaseToUpload:"Release to upload",only3mfSupported:"Only .3mf files are supported",close:"Close",selected:"{{count}} selected",selectAll:"Select All",tags:"Tags",project:"Project",favorite:"Favorite",delete:"Delete",toggledFavorites:"Toggled favorites for {{count}} archive(s)",failedUpdateFavorites:"Failed to update favorites",archivesDeleted:"{{count}} archive(s) deleted",failedDeleteArchives:"Failed to delete archives",photoDeleted:"Photo deleted",failedDeletePhoto:"Failed to delete photo"},list:{name:"Name",printer:"Printer",date:"Date",size:"Size",actions:"Actions",hasTimelapse:"Has timelapse"},log:{date:"Date",printName:"Print Name",printer:"Printer",user:"User",status:"Status",duration:"Duration",filament:"Filament",allPrinters:"All Printers",allUsers:"All Users",allStatuses:"All Statuses",cancelled:"Cancelled",skipped:"Skipped",dateFrom:"From",dateTo:"To",noEntries:"No print log entries found",showing:"Showing {{count}} of {{total}} entries",rowsPerPage:"Rows",page:"Page",prev:"Prev",next:"Next",clearLog:"Clear Log",clearLogTitle:"Clear Print Log",clearLogConfirm:"All print log entries will be permanently deleted. Archives and queue items are not affected. This action cannot be undone. Are you sure?",clearLogButton:"Clear All",cleared:"{{count}} log entries cleared",clearFailed:"Failed to clear print log"}},queue:{title:"Print Queue",subtitle:"Schedule and manage your print jobs",addToQueue:"Add to Queue",print:"Print",reprint:"Re-print",schedulePrint:"Schedule Print",editQueueItem:"Edit Queue Item",printToPrinters:"Print to {{count}} Printers",queueToPrinters:"Queue to {{count}} Printers",queueSelectedPlates:"Queue {{count}} Plates",selectAllPlates:"Select All {{count}} Plates",deselectAll:"Deselect All",printQueued:"Print queued",itemsQueued:"{{count}} items queued",sending:"Sending...",sendingProgress:"Sending {{current}}/{{total}}...",adding:"Adding...",addingProgress:"Adding {{current}}/{{total}}...",savingProgress:"Saving {{current}}/{{total}}...",clearQueue:"Clear Queue",clearHistory:"Clear History",emptyQueue:"Queue is empty",position:"Position",scheduledTime:"Scheduled Time",moveUp:"Move Up",moveDown:"Move Down",startNow:"Start Now",printingInProgress:"Printing in progress...",viewArchive:"View archive",viewInFileManager:"View in File Manager",itemCount:"{{count}} item",itemCount_plural:"{{count}} items",dragToReorder:"Drag to reorder (ASAP only)",reorderHint:"Position only affects ASAP items. Scheduled items run at their set time.",sjf:{label:"SJF",tooltip:"Shortest Job First — scheduler prioritizes shorter prints"},addedBy:"Added by {{name}}",nextInQueue:"Next in queue",clearPlate:"Clear Plate & Start Next",clearPlateSuccess:"Plate cleared — ready for next print",plateReady:"Plate cleared — ready for next print",plateNumber:"Plate {{index}}",quantity:"Quantity",quantityHint:"Creates {{count}} queue items",activeBatches:"Active Batches",batchProgress:"{{completed}} of {{total}} completed",cancelBatch:"Cancel Remaining",batchCancelled:"Remaining batch items cancelled",cancelBatchConfirmTitle:"Cancel Batch",cancelBatchConfirmMessage:"Cancel all remaining pending items in this batch?",batch:"Batch",sections:{currentlyPrinting:"Currently Printing",queued:"Queued",history:"History"},status:{pending:"Pending",waiting:"Waiting",printing:"Printing",paused:"Paused",completed:"Completed",failed:"Failed",skipped:"Skipped",cancelled:"Cancelled"},summary:{printing:"Printing",queued:"Queued",totalTime:"Total Queue Time",totalWeight:"Total Queue Weight",history:"History"},filter:{allPrinters:"All Printers",unassigned:"Unassigned",allStatus:"All Status",allLocations:"All Locations",any:"Any"},sort:{byPosition:"Sort by Position",byName:"Sort by Name",byPrinter:"Sort by Printer",bySchedule:"Sort by Schedule",byDate:"Sort by Date",ascendingOldest:"Ascending (oldest first)",descendingNewest:"Descending (newest first)"},badges:{staged:"Staged",requiresPrevious:"Requires previous success",autoPowerOff:"Auto power off",gcodeInjection:"G-code"},empty:{title:"No prints scheduled",description:'Schedule a print from the Archives page using the "Schedule" option in the context menu, or drag and drop files to get started.'},time:{asap:"ASAP",overdue:"Overdue",now:"Now",lessThanMinute:"In less than a minute",inMinutes:"In {{count}} min",inHours:"In {{count}} hours"},actions:{stopPrint:"Stop Print",startPrint:"Start Print",requeue:"Re-queue"},bulkEdit:{title:"Edit {{count}} Item",title_plural:"Edit {{count}} Items",description:"Only changed settings will be applied to selected items.",printer:"Printer",noChange:"— No change —",queueOptions:"Queue Options",staged:"Staged (manual start)",autoPowerOff:"Auto power off after print",requirePrevious:"Require previous success",printOptions:"Print Options",bedLevelling:"Bed levelling",flowCalibration:"Flow calibration",vibrationCalibration:"Vibration calibration",layerInspection:"First layer inspection",timelapse:"Timelapse",useAms:"Use AMS",applyChanges:"Apply Changes",selectAll:"Select All",deselectAll:"Deselect All",selected:"{{count}} selected",editSelected:"Edit Selected",cancelSelected:"Cancel Selected"},confirm:{cancelTitle:"Cancel Scheduled Print",cancelMessage:'Are you sure you want to cancel "{{name}}"?',stopTitle:"Stop Print",stopMessage:'Are you sure you want to stop the current print "{{name}}"? This will cancel the print job on the printer.',removeTitle:"Remove from History",removeMessage:'Are you sure you want to remove "{{name}}" from the queue history?',clearHistoryTitle:"Clear History",clearHistoryMessage:"Are you sure you want to remove all {{count}} item(s) from the history?",cancelButton:"Cancel Print",stopButton:"Stop Print",thisPrint:"this print",thisItem:"this item"},toast:{cancelled:"Queue item cancelled",cancelFailed:"Failed to cancel item",removed:"Queue item removed",removeFailed:"Failed to remove item",stopped:"Print stopped",stopFailed:"Failed to stop print",released:"Print released to queue",startFailed:"Failed to start print",reorderFailed:"Failed to reorder queue",historyCleared:"Cleared {{count}} history item(s)",clearHistoryFailed:"Failed to clear history",updateFailed:"Failed to update items",bulkCancelled:"Cancelled {{count}} item(s)",bulkCancelFailed:"Failed to cancel items"},timeline:{listView:"List",timelineView:"Timeline",unassigned:"Unassigned",noData:"No scheduled prints for this day",allDoneBy:"All prints estimated done by {{time}}",staged:"Staged",filterAll:"Show All",filterPrinting:"Printing",filterQueued:"Queued",time:{anyMoment:"any moment",minutesLeft:"{{minutes}}m left",hoursLeft:"{{hours}}h left",hoursMinutesLeft:"{{hours}}h {{minutes}}m left"},day:{previous:"Previous day",next:"Next day",today:"Today"}},permissions:{noStopPrint:"You do not have permission to stop prints",noStartPrint:"You do not have permission to start prints",noEdit:"You do not have permission to edit this queue item",noCancel:"You do not have permission to cancel this queue item",noRequeue:"You do not have permission to re-queue items",noRemove:"You do not have permission to remove this queue item",noClearHistory:"You do not have permission to clear all history",noEditItems:"You do not have permission to edit queue items",noCancelItems:"You do not have permission to cancel queue items"}},backgroundDispatch:{unknownFile:"Unknown file",unknownPrinter:"Unknown printer",startingPrints:"Starting prints",progressSummary:"{{complete}}/{{total}} complete • Dispatched: {{dispatched}} • Processing: {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Dismiss dispatch toast",cancelDispatchJob:"Cancel dispatch job",cancel:"Cancel",cancelling:"Cancelling…",status:{dispatched:"Dispatched",processing:"Processing",completed:"Completed",failed:"Failed",cancelled:"Cancelled"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Dispatch cancelled",cancelFailed:"Failed to cancel dispatch",completeWithFailures:"Background dispatch complete: {{completed}} succeeded, {{failed}} failed",completeSuccess:"Background dispatch complete: {{completed}} succeeded",printStartedRemaining:"{{completed}} print(s) started, {{remaining}} more sending..."}},stats:{title:"Dashboard",subtitle:"Drag widgets to rearrange. Click the eye icon to hide.",overview:"Overview",totalPrints:"Total Prints",successRate:"Success Rate",totalPrintTime:"Total Print Time",printTime:"Print Time",totalFilament:"Total Filament Used",filamentUsed:"Filament Used",filamentCost:"Filament Cost",totalCost:"Total Cost",energyUsed:"Energy Used",energyCost:"Energy Cost",energyWarmingUpTooltip:"Energy tracking is still collecting hourly snapshots. Date-range totals will become accurate once at least one snapshot exists before the selected range. Early values may undercount.",averagePrintTime:"Average Print Time",printsPerDay:"Prints per Day",byPrinter:"By Printer",printsByPrinter:"Prints by Printer",byMaterial:"By Material",byMonth:"By Month",last7Days:"Last 7 Days",last30Days:"Last 30 Days",last90Days:"Last 90 Days",allTime:"All Time",quickStats:"Quick Stats",printActivity:"Print Activity",filamentTypes:"Filament Types",filamentTrends:"Filament Trends",failureAnalysis:"Failure Analysis",timeAccuracy:"Time Accuracy",successful:"Successful:",failed:"Failed:",perfectEstimate:"100% = perfect estimate",noTimeAccuracyData:"No time accuracy data yet",noFilamentData:"No filament data available",noPrinterData:"No printer data available",noPrintData:"No print data available",noPrintDataLast30Days:"No print data in the last 30 days",failureReasons:"Failure Reasons",topFailureReasons:"Top Failure Reasons",failedPrintsCount:"{{failed}} / {{total}} prints failed",lastWeekRate:"Last week: {{rate}}%",resetLayout:"Reset Layout",recalculateCosts:"Recalculate Costs",recalculateCostsHint:"Recalculate all archive costs using current filament prices",exportStats:"Export Stats",exportAsCsv:"Export as CSV",exportAsExcel:"Export as Excel",hiddenCount:"{{count}} Hidden",exportDownloaded:"Export downloaded",exportFailed:"Export failed",layoutReset:"Layout reset",recalculatedCosts:"Recalculated costs for {{count}} archives",recalculateFailed:"Failed to recalculate costs",loadingStats:"Loading statistics...",noPermissionResetLayout:"You do not have permission to reset layout",noPermissionRecalculate:"You do not have permission to recalculate costs",noPrintDataInRange:"No print data in selected range",periodFilament:"Period Filament",periodCost:"Period Cost",avgPerPrint:"Avg per Print",usageOverTime:"Usage Over Time",filamentByWeight:"Weight",printDuration:"Print Duration",printerUtilization:"Printer Utilization",filamentSuccess:"Success by Material",printHabits:"Print Habits",printTimeOfDay:"Print Time of Day",colorDistribution:"Color Distribution",noColorData:"No color data available",records:"Records",longestPrint:"Longest Print",heaviestPrint:"Heaviest Print",mostExpensivePrint:"Most Expensive",busiestDay:"Busiest Day",successStreak:"Success Streak",streakPrint:"consecutive print",streakPrints:"{{count}} consecutive prints",printerStats:"Printer Stats",hours:"hours",avgPrints:"Avg. prints",noArchiveData:"No print data available",filamentByTime:"Time",avgWeight:"Avg. weight",avgTime:"Avg. time",filamentByPrints:"Prints",timeframe:{today:"Today","this-week":"This Week","this-month":"This Month","last-7":"Last 7 Days","last-30":"Last 30 Days","last-90":"Last 90 Days","this-year":"This Year","all-time":"All Time",custom:"Custom Range",from:"From",to:"To"},allUsers:"All Users",noUser:"No User (System)",filterByUser:"Filter by User"},maintenance:{title:"Maintenance",overview:"Overview",allOk:"All maintenance up to date",dueCount:"{{count}} item due",dueCount_plural:"{{count}} items due",warningCount:"{{count}} warning",warningCount_plural:"{{count}} warnings",totalPrintTime:"Total Print Time",nextMaintenance:"Next Maintenance",nothingDue:"Nothing due",tasks:"Tasks",lastPerformed:"Last performed",interval:"Interval",hoursRemaining:"{{hours}}h remaining",hoursOverdue:"{{hours}}h overdue",markDone:"Mark as Done",performMaintenance:"Perform Maintenance",history:"History",noHistory:"No maintenance history",editPrintHours:"Edit Print Hours",currentHours:"Current Hours",statusTab:"Status",settingsTab:"Settings",overdueCount:"{{count}} overdue",dueSoonCount:"{{count}} due soon",dueSoon:"Due soon",allGood:"All good",overdueBy:"Overdue by {{duration}}",dueIn:"Due in {{duration}}",timeLeft:"{{duration}} left",day:"1 day",days:"{{count}} days",week:"1 week",weeks:"{{count}} weeks",month:"1 month",months:"{{count}} months",year:"1 year",maintenanceTypes:"Maintenance Types",maintenanceTypesDescription:"System types and your custom maintenance tasks",addCustomType:"Add Custom Type",restoreDefaults:"Restore Default Tasks",intervalType:"Interval Type",intervalValue:"Interval ({{type}})",icon:"Icon",documentationLink:"Documentation Link (optional)",assignToPrinters:"Assign to Printers",selectAtLeastOnePrinter:"Select at least one printer",addType:"Add Type",custom:"Custom",printHours:"Print Hours",calendarDays:"Calendar Days",exampleName:"e.g., Replace HEPA Filter",viewDocumentation:"View documentation",timeBasedInterval:"Time-based interval",intervalOverrides:"Interval Overrides",intervalOverridesDescription:"Customize intervals for specific printers",assignedToPrinters:"Assigned to printers:",noPrintersAssigned:"No printers assigned",addPrinterShort:"Add:",printersAssignedClick:"{{count}} printer(s) assigned - click to manage",removeFromPrinter:"Remove from this printer",types:{lubricateCarbonRods:"Lubricate Carbon Rods",lubricateRails:"Lubricate Linear Rails",cleanNozzle:"Clean Nozzle/Hotend",checkBelts:"Check Belt Tension",cleanBuildPlate:"Clean Build Plate",checkExtruder:"Check Extruder Gears",checkCooling:"Check Cooling Fans",generalInspection:"General Inspection",cleanCarbonRods:"Clean Carbon Rods",lubricateSteelRods:"Lubricate Steel Rods",cleanSteelRods:"Clean Steel Rods",cleanLinearRails:"Clean Linear Rails",checkPtfeTube:"Check PTFE Tube",replaceHepaFilter:"Replace HEPA Filter",replaceCarbonFilter:"Replace Carbon Filter",lubricateLeftNozzleRail:"Lubricate Left Nozzle Rail"},maintenanceComplete:"Maintenance marked as complete",typeUpdated:"Maintenance type updated",typeDeleted:"Maintenance type deleted",defaultsRestored:"Restored {{count}} default task(s)",printHoursUpdated:"Print hours updated",printerAssigned:"Printer assigned",printerRemoved:"Printer removed",deleteTypeConfirm:'Delete "{{name}}"?',deleteSystemTypeTitle:"Delete default maintenance task?",deleteSystemTypeMessage:'Are you sure you want to delete the default maintenance task "{{name}}"?',noPermissionUpdate:"You do not have permission to update maintenance items",noPermissionPerform:"You do not have permission to perform maintenance",noPermissionEditTypes:"You do not have permission to edit maintenance types",noPermissionDeleteTypes:"You do not have permission to delete maintenance types",noPermissionEditHours:"You do not have permission to edit print hours",noPermissionRemovePrinter:"You do not have permission to remove printer assignments",noPermissionAssignPrinter:"You do not have permission to assign printers",noPermissionEditIntervals:"You do not have permission to edit intervals",configureSettings:"Configure maintenance types and intervals"},settings:{title:"Settings",general:"General",tabs:{general:"General",smartPlugs:"Smart Plugs",notifications:"Notifications",queue:"Workflow",filament:"Filament",network:"Network",apiKeys:"API Keys",virtualPrinter:"Virtual Printer",spoolbuddy:"SpoolBuddy",failureDetection:"Failure Detection",users:"Authentication",backup:"Backup",emailAuth:"Email Authentication",ldap:"LDAP",twoFa:"Two-Factor Auth",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy devices",infoBody:"SpoolBuddy kiosks register themselves automatically via heartbeat. Unregister a device here if it is no longer in use or if a stale duplicate was left behind by a daemon crash.",duplicatesTitle:"{{count}} devices registered",duplicatesBody:"Only the first registered device is used by the kiosk UI. If one of these is a stale duplicate from a crash, unregister it — an online device will re-register itself on its next heartbeat.",empty:"No SpoolBuddy devices registered yet.",online:"Online",offline:"Offline",unregister:"Unregister",unregisterSuccess:"Device unregistered",unregisterError:"Failed to unregister device",confirmTitle:"Unregister SpoolBuddy device?",confirmBody:'This will remove "{{hostname}}" ({{deviceId}}) from the database. If the device is online, it will re-register itself on its next heartbeat.',ipAddress:"IP address",firmware:"Firmware",lastSeen:"Last seen",daemonUptime:"Daemon uptime",systemUptime:"System uptime",never:"never",nfc:"NFC",scale:"Scale",cpuTemp:"CPU temp",memory:"Memory",disk:"Disk",update:"Update",updateConfirmTitle:"Update Spoolbuddy daemon?",updateConfirmBody:'Trigger a software update on "{{hostname}}"? The daemon will restart once the update is applied.',restartBrowser:"Restart Browser",restartBrowserConfirmTitle:"Restart kiosk browser?",restartBrowserConfirmBody:'Restart the kiosk browser on "{{hostname}}"? The display will blank briefly.',restartDaemon:"Restart Daemon",restartDaemonConfirmTitle:"Restart Spoolbuddy daemon?",restartDaemonConfirmBody:'Restart the Spoolbuddy daemon on "{{hostname}}"? The device will go offline for a few seconds.',reboot:"Reboot",rebootConfirmTitle:"Reboot device?",rebootConfirmBody:'Reboot "{{hostname}}"? The device will be offline for around a minute.',shutdown:"Shutdown",shutdownConfirmTitle:"Shutdown device?",shutdownConfirmBody:'Shutdown "{{hostname}}"? You will need physical access to power it back on.',commandConfirm:"Confirm",commandQueued:"Command queued",commandError:"Failed to send command"},ldap:{title:"LDAP Authentication",enabledDesc:"LDAP authentication is enabled",disabledDesc:"LDAP authentication is disabled",disabledHint:"Configure and save LDAP settings below, then enable.",enabled:"LDAP authentication enabled",disabled:"LDAP authentication disabled",feature1:"Users can login with LDAP credentials",feature2:"Local admin account remains as fallback",feature3:"LDAP groups are mapped to BamBuddy groups on login",serverConfig:"LDAP Server Configuration",serverUrl:"Server URL",serverUrlHint:"Use ldaps:// for SSL or ldap:// with StartTLS",security:"Security",securityHint:"StartTLS upgrades a plain connection to TLS. LDAPS uses TLS from the start.",bindDn:"Bind DN (Service Account)",bindPassword:"Bind Password",searchBase:"Search Base DN",userFilter:"User Search Filter",userFilterHint:"{username} is replaced with the login username. Use (uid={username}) for OpenLDAP.",autoProvision:"Auto-provision users",autoProvisionHint:"Automatically create a BamBuddy account on first LDAP login",defaultGroup:"Default group",defaultGroupNone:"— None (no fallback) —",defaultGroupHint:"Fallback group assigned when an LDAP user authenticates but is not listed in any mapped LDAP group. Leave empty to leave unmapped users without permissions.",groupMapping:"Group Mapping (JSON)",groupMappingHint:"Map LDAP group DNs to BamBuddy groups. Available groups: ",testConnection:"Test Connection",settingsSaved:"LDAP settings saved",errors:{serverRequired:"LDAP server URL is required",searchBaseRequired:"Search base DN is required",enableAuthFirst:"Enable authentication first",configureLdapFirst:"Save LDAP settings first"}},email:{smtpSettings:"SMTP Configuration",smtpHost:"SMTP Server",smtpPort:"SMTP Port",security:"Security",authentication:"Authentication",username:"Username",password:"Password",fromEmail:"From Email",fromName:"From Name",testConnection:"Test SMTP Connection",testRecipient:"Test Recipient Email",sendTest:"Send Test Email",sending:"Sending...",save:"Save Settings",saving:"Saving...",advancedAuth:"Advanced Authentication",advancedAuthEnabled:"Advanced Authentication is enabled",advancedAuthEnabledDesc:"Email-based user management features are active. New users will receive auto-generated passwords via email, and users can reset their passwords through the forgot password feature.",advancedAuthDisabled:"Advanced Authentication is disabled",advancedAuthDisabledDesc:"Enable advanced authentication to activate email-based features for user management.",enable:"Enable",disable:"Disable",feature1:"Passwords are auto-generated and emailed to new users",feature2:"Users can login with username or email",feature3:"Forgot password feature is available",feature4:"Admins can reset user passwords via email",errors:{requiredFields:"Please fill in all required fields",usernameRequired:"Username is required when authentication is enabled",enterTestEmail:"Please enter a test email address",smtpServerAndEmail:"Please fill in SMTP Server and From Email before testing",usernamePasswordRequired:"Username and Password are required when authentication is enabled",configureSmtpFirst:"Please configure and test SMTP settings first",enableAuthFirst:"Please enable authentication first to use email-based features."},success:{settingsSaved:"SMTP settings saved successfully"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"None (Port 25)"},authOptions:{enabled:"Enabled",disabled:"Disabled"}},appearance:"Appearance",notifications:"Notifications",smartPlugs:"Smart Plugs",spoolman:"Spoolman",updates:"Updates",language:"Language",languageDescription:"Select your preferred language",theme:"Theme",themeLight:"Light",themeDark:"Dark",themeSystem:"System",defaultView:"Default View",defaultViewDescription:"Page to show when opening the app",checkForUpdates:"Check for Updates",autoUpdate:"Auto Update",currentVersion:"Current Version",latestVersion:"Latest Version",upToDate:"You are up to date",updateAvailable:"Update available",notificationLanguage:"Notification Language",notificationLanguageDescription:"Language for push notifications",bedCooledThreshold:"Bed Cooled Threshold",bedCooledThresholdDescription:"Temperature below which the bed is considered cooled after a print",userNotificationsEnabled:"User Notifications",userNotificationsEnabledDescription:"Enable the user notifications menu and email notifications for print job events. Requires Advanced Authentication.",userNotificationsDisabledHint:"Enable Advanced Authentication to use user notifications.",notificationProviders:"Notification Providers",addProvider:"Add Provider",editProvider:"Edit Provider",providerType:"Provider Type",testNotification:"Test Notification",testSuccess:"Test notification sent successfully",testFailed:"Failed to send test notification",quietHours:"Quiet Hours",quietHoursDescription:"Do not disturb during these hours",quietHoursStart:"Start",quietHoursEnd:"End",events:{title:"Notification Events",printStart:"Print Started",printComplete:"Print Completed",printFailed:"Print Failed",printStopped:"Print Stopped",printProgress:"Progress Milestones",printProgressDescription:"Notify at 25%, 50%, 75%",printerOffline:"Printer Offline",printerError:"Printer Error",filamentLow:"Low Filament",maintenanceDue:"Maintenance Due",maintenanceDueDescription:"Notify when maintenance is needed"},smartPlug:{title:"Smart Plugs",add:"Add Smart Plug",edit:"Edit Smart Plug",name:"Name",ipAddress:"IP Address",linkedPrinter:"Linked Printer",autoOn:"Auto Power On",autoOnDescription:"Turn on when print starts",autoOff:"Auto Power Off",autoOffDescription:"Turn off after print completes",offDelay:"Off Delay",offDelayMinutes:"Minutes after print",offDelayTemp:"When nozzle below temperature",currentState:"Current State",turnOn:"Turn On",turnOff:"Turn Off"},filamentTracking:"Filament Tracking",filamentTrackingDesc:"Choose how to track your filament spools. You can use the built-in inventory or connect an external Spoolman server.",filamentChecks:"Filament checks",disableFilamentWarnings:"Disable filament warnings",disableFilamentWarningsDesc:"Don't show warnings about insufficient filament when printing or queueing",preferLowestFilament:"Prefer lowest remaining filament",preferLowestFilamentDesc:"When multiple spools match, use the one with the least filament remaining",trackingModeBuiltIn:"Built-in Inventory",trackingModeBuiltInDesc:"RFID auto-matching and usage tracking included",trackingModeSpoolmanDesc:"External filament management server",builtInFeatureRfid:"Automatically detects Bambu Lab RFID spools in AMS",builtInFeatureUsage:"Tracks filament consumption per print",builtInFeatureCatalog:"Manage spools, colors, and K-factor profiles",builtInFeatureThirdParty:"Third-party spools can be assigned to inventory spools",amsSyncButton:"Sync Weights from AMS",amsSyncTitle:"Sync Spool Weights from AMS",amsSyncMessage:"This will overwrite all inventory spool weights with the current AMS remain% values from connected printers. Use this to recover from corrupted weight data. Printers must be online.",amsSyncing:"Syncing...",amsSyncSuccess:"{{synced}} spool(s) synced, {{skipped}} skipped",amsSyncError:"Failed to sync weights from AMS",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL of your Spoolman server (e.g., http://localhost:7912)",spoolmanConnected:"Connected",spoolmanDisconnected:"Disconnected",status:"Status",connect:"Connect",disconnect:"Disconnect",howSyncWorks:"How Sync Works",syncInfoRfidOnly:"Only official Bambu Lab spools with RFID are synced",syncInfoAutoCreate:"New spools are auto-created in Spoolman on first sync",syncInfoThirdPartySkipped:"Non-Bambu Lab spools (third-party, refilled) are skipped",linkingExistingSpools:"Linking Existing Spools",linkingExistingSpoolsDesc:'To link existing Spoolman spools to your AMS, hover over an AMS slot and click "Link to Spoolman".',syncMode:"Sync Mode",syncModeAuto:"Automatic",syncModeManual:"Manual Only",syncModeAutoDesc:"AMS data syncs automatically when changes are detected",syncModeManualDesc:"Only sync when manually triggered",syncAmsData:"Sync AMS Data",syncAmsDataDesc:"Manually sync printer AMS data to Spoolman",allPrinters:"All Printers",noDefaultPrinter:"No default (ask each time)",sidebarOrder:"Sidebar order",saveThumbnails:"Save thumbnails",captureFinishPhoto:"Capture finish photo",noPrintersConfigured:"No printers configured",archiveMode:{always:"Always create archive entry",never:"Never create archive entry",ask:"Ask each time"},checkForUpdatesLabel:"Check for updates",checkPrinterFirmware:"Check printer firmware",includeBetaUpdates:"Include beta versions",includeBetaUpdatesDesc:"Notify about beta and prerelease versions when checking for updates",enableRetry:"Enable retry",homeAssistantDescription:"Control smart plugs via Home Assistant",environmentManagedLabel:"(Environment Managed)",autoEnabledViaEnv:"Automatically enabled via environment variables",urlFromEnvReadOnly:"Value set by HA_URL environment variable (read-only)",tokenFromEnvReadOnly:"Value set by HA_TOKEN environment variable (read-only)",mqttConnectedTo:"Connected to",prometheusDescription:"Expose printer data in Prometheus format",noSmartPlugsTitle:"No smart plugs configured",noSmartPlugsDescription:"Add a Tasmota-based smart plug to track energy usage and automate power control.",noProvidersTitle:"No providers configured",noProvidersDescription:"Add a provider to receive alerts.",noTemplatesAvailable:"No templates available. Restart the backend to seed default templates.",apiPermissionView:"View printer status and queue",apiPermissionEdit:"Add and remove items from print queue",apiKeysEmptyTitle:"No API keys",apiKeysEmptyDescription:"Create an API key to integrate with external services.",noUsersFound:"No users found",noGroupsFound:"No groups found",noGroupsAvailable:"No groups available",passwordsDoNotMatch:"Passwords do not match",systemGroupWarning:"System group names cannot be changed",authDisabledTitle:"Authentication is Disabled",authDisabledFeature1:"Require login to access the system",authDisabledFeature2:"Create multiple users with group-based permissions",authDisabledFeature3:"Control access with 50+ granular permissions",userHasCreated:"This user has created:",userItemsQuestion:"What would you like to do with these items?",deleteUserConfirm:"Are you sure you want to delete this user?",actionCannotBeUndone:"This action cannot be undone.",addFirstSmartPlug:"Add Your First Smart Plug",providers:"Providers",log:"Log",testAll:"Test All",testResults:"Test Results",testPassedCount:"{{count}} passed",testFailedCount:"{{count}} failed",messageTemplates:"Message Templates",messageTemplatesDescription:"Customize notification messages for each event.",apiKeys:"API Keys",apiKeysDescription:"Create API keys for external integrations and webhooks.",createKey:"Create Key",apiKeyCreated:"API Key Created Successfully",apiKeyCopyWarning:"Copy this key now - it won't be shown again!",useInApiBrowser:"Use in API Browser",createNewApiKey:"Create New API Key",keyName:"Key Name",keyNamePlaceholder:"e.g., Home Assistant, OctoPrint",readStatus:"Read Status",readStatusDescription:"View printer status and queue",manageQueue:"Manage Queue",manageQueueDescription:"Add and remove items from print queue",controlPrinter:"Control Printer",controlPrinterDescription:"Pause, resume, and stop prints",unnamedKey:"Unnamed Key",lastUsed:"Last used",read:"Read",control:"Control",createFirstKey:"Create Your First Key",webhookEndpoints:"Webhook Endpoints",webhookApiKeyHint:"Use your API key in the X-API-Key header.",webhook:{getAllStatus:"Get all printer status",getSpecificStatus:"Get specific printer status",addToQueue:"Add to print queue",pausePrint:"Pause print",resumePrint:"Resume print",stopPrint:"Stop print"},apiBrowser:"API Browser",apiBrowserDescription:"Explore and test all available API endpoints.",apiKeyForTesting:"API Key for Testing",apiKeyPlaceholder:"Paste your API key here to test authenticated endpoints...",apiKeyHint:"This key will be sent as X-API-Key header with requests.",deleteApiKeyTitle:"Delete API Key",deleteApiKeyMessage:"Are you sure you want to delete this API key? Any integrations using this key will stop working.",deleteKey:"Delete Key",amsDisplayThresholds:"AMS Display Thresholds",amsThresholdsDescription:"Configure color thresholds for AMS humidity and temperature indicators.",humidity:"Humidity",goodGreen:"Good (green)",fairOrange:"Fair (orange)",aboveFairBad:"Above fair threshold shows as red (bad)",fairAlsoDryingThreshold:"This threshold is also used to trigger auto-drying when enabled",temperature:"Temperature",goodBlue:"Good (blue)",aboveFairHot:"Above fair threshold shows as red (hot)",historyRetention:"History Retention",keepSensorHistory:"Keep sensor history for",historyRetentionDescription:"Older humidity and temperature data will be automatically deleted",defaultPrintOptions:"Default Print Options",defaultPrintOptionsDescription:"Set default values for print options when starting new prints. These can be overridden per print in the print dialog.",defaultBedLevelling:"Bed Levelling",defaultBedLevellingDesc:"Auto-level bed before print",defaultFlowCali:"Flow Calibration",defaultFlowCaliDesc:"Calibrate extrusion flow",defaultVibrationCali:"Vibration Calibration",defaultVibrationCaliDesc:"Reduce ringing artifacts",defaultLayerInspect:"First Layer Inspection",defaultLayerInspectDesc:"AI inspection of first layer",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Record timelapse video",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Plate-Clear Confirmation",requirePlateClear:"Require plate-clear confirmation",requirePlateClearDescription:"When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disable for farm workflows where plates are verified physically.",gcodeInjection:"G-code Injection",gcodeInjectionDescription:'Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.',gcodeInjectionNoPrinters:"No printers found. Add printers to configure G-code snippets.",gcodeStartLabel:"Start G-code",gcodeEndLabel:"End G-code",gcodeStartPlaceholder:"G-code prepended before the print starts...",gcodeEndPlaceholder:"G-code appended after the print ends...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Queue Auto-Drying",queueDryingDescription:"Automatically dry AMS filament when printer is idle between queued prints. Uses humidity threshold above to trigger drying.",queueDryingEnabled:"Enable auto-drying",queueDryingEnabledDescription:"Start AMS drying automatically when printer is idle and humidity is above threshold",queueDryingBlock:"Wait for drying to complete",queueDryingBlockDescription:"Block the print queue until drying finishes. When off, prints take priority over drying.",ambientDryingEnabled:"Ambient drying",ambientDryingEnabledDescription:"Automatically dry filament on idle printers when humidity exceeds threshold, even without queued prints.",dryingPresets:"Drying Presets",dryingPresetsDescription:"Temperature and duration per filament type. AMS 2 Pro uses lower temps, AMS-HT supports higher temps.",dryingFilament:"Filament",printModal:"Print Modal",expandCustomMapping:"Expand custom mapping by default",expandCustomMappingDescription:"When printing to multiple printers, show per-printer AMS mapping expanded",authentication:"Authentication",authEnabledDescription:"Your instance is secured with user authentication",authDisabledDescription:"Enable to require login and manage user access",authDisabledMessage:"Enable authentication to create user accounts, manage permissions, and secure your Bambuddy instance.",enableAuthentication:"Enable Authentication",currentUser:"Current User",changePassword:"Change Password",admin:"Admin",users:"Users",addUser:"Add User",groups:"Groups",addGroup:"Add Group",system:"System",noDescription:"No description",userCount:"{{count}} users",permissionCount:"{{count}} permissions",createUser:"Create User",username:"Username",enterUsername:"Enter username",password:"Password",enterPassword:"Enter password (min 6 characters)",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm password",viewReleaseOnGitHub:"View release on GitHub",turnAllPlugsOn:"Turn all plugs on",turnAllPlugsOff:"Turn all plugs off",clearNotificationLogs:"Clear Notification Logs",clearLogsMessage:"This will permanently delete all notification logs older than 30 days. This action cannot be undone.",clearLogs:"Clear Logs",resetUiPreferences:"Reset UI Preferences",resetUiPreferencesMessage:"This will reset all UI preferences to defaults: sidebar order, theme, dashboard layout, view modes, and sorting preferences. Your printers, archives, and server settings will NOT be affected. The page will reload after clearing.",resetPreferences:"Reset Preferences",deleteGroupTitle:"Delete Group",deleteGroupMessage:"Are you sure you want to delete this group? Users in this group will lose these permissions.",deleteGroup:"Delete Group",disableAuthenticationTitle:"Disable Authentication",disableAuthenticationMessage:"Are you sure you want to disable authentication? This will make your Bambuddy instance accessible without login. All users will remain in the database but authentication will be disabled.",disableAuthentication:"Disable Authentication",configureBambuddy:"Configure Bambuddy",systemDefault:"System Default",archiveSettings:"Archive Settings",newWindow:"New Window",embeddedOverlay:"Embedded Overlay",preferredSlicer:"Preferred Slicer",preferredSlicerDescription:"Choose which slicer application to open files with",externalCameras:"External Cameras",costTracking:"Cost Tracking",printsOnly:"Prints Only",totalConsumption:"Total Consumption",dataManagement:"Data Management",storageUsage:"Storage Usage",storageUsageDescription:"Breakdown of data usage by category",storageUsageTotal:"Total",storageUsageErrors:"Errors",storageUsageOtherBreakdown:"Other (includes static assets, scripts, and configuration files)",storageUsageSystem:"System",storageUsageData:"Data",storageUsageUnavailable:"Storage usage information unavailable",clearNotificationLogsDescription:"Delete notification logs older than 30 days",resetUiPreferencesDescription:"Reset sidebar order, theme, view modes, and layout preferences. Printers, archives, and settings are not affected.",enableHomeAssistant:"Enable Home Assistant",enableMqtt:"Enable MQTT",useTls:"Use TLS",enableMetricsEndpoint:"Enable Metrics Endpoint",availableMetrics:"Available Metrics",editUser:"Edit User",deleteUserTitle:"Delete User",groupName:"Group Name",leaveEmptyForAnonymous:"Leave empty for anonymous",leaveEmptyForNoAuth:"Leave empty for no authentication",enterNewPassword:"Enter new password",confirmNewPassword:"Confirm new password",enterGroupName:"Enter group name",enterDescriptionOptional:"Enter description (optional)",enterCurrentPassword:"Enter current password",enterNewPasswordMin6:"Enter new password (min 6 characters)",toast:{keyCopied:"Key copied to clipboard",copyFailed:"Failed to copy key",keyAddedToBrowser:"Key added to API Browser",clearLogsFailed:"Failed to clear logs",uiPreferencesReset:"UI preferences reset. Refreshing...",authDisabled:"Authentication disabled successfully",authDisableFailed:"Failed to disable authentication",apiKeyCreated:"API key created",apiKeyDeleted:"API key deleted",userCreated:"User created successfully",userUpdated:"User updated successfully",userDeleted:"User deleted successfully",groupCreated:"Group created successfully",groupUpdated:"Group updated successfully",groupDeleted:"Group deleted successfully",fillRequiredFields:"Please fill in all required fields",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters",enterGroupName:"Please enter a group name",settingsSaved:"Settings saved",cameraSettingsSaved:"Camera settings saved",enterCameraUrl:"Please enter a camera URL",passwordChanged:"Password changed successfully",connectionFailed:"Connection failed",testFailed:"Test failed",cameraConnected:"Camera connected{{resolution}}"},testConnection:"Test Connection",catalog:{spoolCatalog:"Spool Catalog",spoolCatalogDescription:"Empty spool weights by brand/type. Used for automatic weight lookup when adding spools.",searchCatalog:"Search catalog...",addNewEntry:"Add New Entry",namePlaceholder:"Name (e.g., Bambu Lab - Plastic)",weight:"Weight",type:"Type",default:"Default",custom:"Custom",noMatch:"No entries match your search",empty:"No entries in catalog",deleteEntry:"Delete Entry",deleteConfirm:'Are you sure you want to delete "{{name}}"?',resetCatalog:"Reset Catalog",resetConfirm:"Reset catalog to defaults? This will remove all custom entries.",loadFailed:"Failed to load spool catalog",nameWeightRequired:"Name and weight are required",entryAdded:"Entry added",addFailed:"Failed to add entry",entryUpdated:"Entry updated",updateFailed:"Failed to update entry",entryDeleted:"Entry deleted",deleteFailed:"Failed to delete entry",resetSuccess:"Catalog reset to defaults",resetFailed:"Failed to reset catalog",exported:"Exported {{count}} entries",imported:"Imported {{added}} entries ({{skipped}} skipped)",importFailed:"Failed to import: invalid JSON format",exportTooltip:"Export catalog to JSON",importTooltip:"Import catalog from JSON",resetTooltip:"Reset to defaults",selectedCount:"{{count}} selected",deleteSelected:"Delete Selected",bulkDeleteConfirm:"Are you sure you want to delete {{count}} entries?",bulkDeleted:"Deleted {{count}} entries",bulkDeleteFailed:"Failed to delete entries"},colorCatalog:{title:"Color Catalog",description:"Filament colors by manufacturer/material. Used for automatic color lookup when adding spools.",searchColors:"Search colors...",allManufacturers:"All manufacturers",addNewColor:"Add New Color",manufacturer:"Manufacturer",colorName:"Color Name",hex:"Hex",materialOptional:"Material (optional)",showing:"Showing {{filtered}} of {{total}} colors",noMatch:"No colors match your search",empty:"No colors in catalog",deleteColor:"Delete Color",deleteConfirm:'Are you sure you want to delete "{{name}}"?',resetCatalog:"Reset Color Catalog",resetConfirm:"Reset catalog to defaults? This will remove all custom colors.",sync:"Sync",starting:"Starting...",syncTooltip:"Sync from FilamentColors.xyz (2000+ colors, may take a minute)",loadFailed:"Failed to load color catalog",fieldsRequired:"Manufacturer, color name, and hex color are required",colorAdded:"Color added",addFailed:"Failed to add color",colorUpdated:"Color updated",updateFailed:"Failed to update color",colorDeleted:"Color deleted",deleteFailed:"Failed to delete color",resetSuccess:"Color catalog reset to defaults",resetFailed:"Failed to reset catalog",syncUpToDate:"Already up to date ({{count}} colors checked)",syncComplete:"Added {{added}} new colors ({{skipped}} already existed)",syncError:"Sync error",syncFailed:"Failed to sync from FilamentColors.xyz",exported:"Exported {{count}} colors",imported:"Imported {{added}} colors ({{skipped}} skipped)",importFailed:"Failed to import: invalid JSON format",selectedCount:"{{count}} selected",deleteSelected:"Delete Selected",bulkDeleteConfirm:"Are you sure you want to delete {{count}} colors?",bulkDeleted:"Deleted {{count}} colors",bulkDeleteFailed:"Failed to delete colors"},dateFormat:"Date Format",dateFormatUs:"US (MM/DD/YYYY)",dateFormatEu:"EU (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"Time Format",timeFormat12:"12-hour (3:30 PM)",timeFormat24:"24-hour (15:30)",defaultPrinter:"Default Printer",defaultPrinterDescription:"Pre-select this printer for uploads, reprints, and other operations.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Drag items in the sidebar to reorder. Reset to default order here.",setDefault:"Set Default",sidebarOrderSetDefaultHint:"Set default applies the current menu order to users who haven't customized theirs.",sidebarDefaultSet:"Default menu order has been set.",sidebarDefaultCleared:"Default menu order cleared.",sidebarDefaultFailed:"Failed to set default menu order.",reset:"Reset",darkMode:"Dark Mode",lightMode:"Light Mode",active:"(active)",background:"Background",accent:"Accent",style:"Style",bgNeutral:"Neutral",bgWarm:"Warm",bgCool:"Cool",bgOled:"OLED Black",bgSlate:"Slate Blue",bgForest:"Forest Green",accentGreen:"Green",accentTeal:"Teal",accentBlue:"Blue",accentOrange:"Orange",accentPurple:"Purple",accentRed:"Red",styleClassic:"Classic",styleGlow:"Glow",styleVibrant:"Vibrant",themeToggleHint:"Toggle between dark and light mode using the sun/moon icon in the sidebar.",autoArchivePrints:"Auto-archive prints",autoArchiveDescription:"Automatically save 3MF files when prints complete",saveThumbnailsDescription:"Extract and save preview images from 3MF files",captureFinishPhotoDescription:"Take a photo from printer camera when print completes",ffmpegNotInstalled:"ffmpeg not installed",ffmpegRequired:"Camera capture requires ffmpeg. Install it via brew install ffmpeg (macOS) or apt install ffmpeg (Linux).",camera:"Camera",cameraViewMode:"Camera View Mode",cameraOverlayDescription:"Camera opens in a resizable overlay on the main screen",cameraWindowDescription:"Camera opens in a separate browser window",externalCamerasDescription:"Configure external cameras to replace the built-in printer camera. Supports MJPEG streams, RTSP, HTTP snapshots, and USB cameras (V4L2). When enabled, the external camera is used for live view and finish photos.",cameraPlaceholderUsb:"Device path (/dev/video0)",cameraPlaceholderUrl:"Camera URL (rtsp://... or http://...)",cameraTypeMjpeg:"MJPEG Stream",cameraTypeRtsp:"RTSP Stream",cameraTypeSnapshot:"HTTP Snapshot",cameraTypeUsb:"USB Camera (V4L2)",cameraRotation:"Rotation",test:"Test",connected:"Connected",disconnected:"Disconnected",currency:"Currency",defaultFilamentCost:"Default filament cost (per kg)",electricityCost:"Electricity cost per kWh",energyDisplayMode:"Energy display mode",energyModePrintDescription:"Dashboard shows sum of energy used during prints",energyModeTotalDescription:"Dashboard shows lifetime energy from smart plugs",fileManager:"File Manager",createArchiveEntry:"Create Archive Entry When Printing",createArchiveEntryDescription:"When printing from File Manager, optionally create an archive entry",lowDiskSpaceWarning:"Low Disk Space Warning",lowDiskSpaceDescription:"Show warning when free disk space falls below this threshold",printerFirmware:"Printer Firmware",checkFirmwareDescription:"Check for printer firmware updates from Bambu Lab",bambuddySoftware:"Bambuddy Software",autoCheckDescription:"Automatically check for new versions on startup",checkNow:"Check now",updateAvailableVersion:"Update available: v{{version}}",releaseNotes:"Release Notes",updateViaDocker:"Update via Docker Compose:",installUpdate:"Install Update",latestVersionRunning:"You're running the latest version",failedToCheckUpdates:"Failed to check for updates: {{error}}",backupRestore:"Backup & Restore",backupRestoreDescription:"Export/import settings and configure GitHub backup",goToBackup:"Go to Backup",externalUrl:"External URL",externalUrlDescription:"The external URL where Bambuddy is accessible. Used for notification images and external integrations.",bambuddyUrl:"Bambuddy URL",externalUrlHint:"Include protocol and port (e.g., http://192.168.1.100:8000)",ftpRetry:"FTP Retry",ftpRetryDescription:"Retry FTP operations when printer WiFi is unreliable. Applies to 3MF downloads, print uploads, timelapse downloads, and firmware updates.",autoRetryDescription:"Automatically retry failed FTP operations",retryAttempts:"Retry attempts",retryDelay:"Retry delay",connectionTimeout:"Connection timeout",time_one:"{{count}} time",time_other:"{{count}} times",second_one:"{{count}} second",second_other:"{{count}} seconds",nSeconds:"{{count}} seconds",increaseForWeakWifi:"Increase for printers with weak WiFi",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Connect to Home Assistant to control smart plugs via HA's REST API. Supports switch, light, input_boolean, and script entities.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Long-Lived Access Token",haTokenHint:"Create a token in HA: Profile → Long-Lived Access Tokens → Create Token",connectionSuccessful:"Connection Successful",connectionFailed:"Connection Failed",haConnectionSuccess:"Successfully connected to Home Assistant.",haConnectionFailed:"Failed to connect to Home Assistant.",mqttPublishing:"MQTT Publishing",mqttDescription:"Publish BamBuddy events to an external MQTT broker for integration with Node-RED, Home Assistant, and other automation systems.",mqttEnableDescription:"Publish events to external MQTT broker",brokerHostname:"Broker hostname",port:"Port",usernameOptional:"Username (optional)",passwordOptional:"Password (optional)",topicPrefix:"Topic prefix",topicPrefixHint:"Topics will be: {{prefix}}/printers//status, etc.",prometheusMetrics:"Prometheus Metrics",prometheusEndpointDescription:"Expose printer metrics at /api/v1/metrics for Prometheus/Grafana monitoring.",bearerTokenOptional:"Bearer Token (optional)",bearerTokenHint:"If set, requests must include Authorization: Bearer ",metricsConnectionStatus:"Connection status",metricsPrinterState:"Printer state (idle/printing/etc)",metricsPrintProgress:"Print progress 0-100%",metricsBedTemp:"Bed temperature",metricsNozzleTemp:"Nozzle temperature",metricsPrintsTotal:"Total prints by result",metricsMore:"...and more (layers, fans, queue, filament usage)",smartPlugsDescription:"Connect smart plugs (Tasmota or Home Assistant) to automate power control and track energy usage for your printers.",allOn:"All On",allOff:"All Off",addSmartPlug:"Add Smart Plug",energySummary:"Energy Summary",currentPower:"Current Power",plugsOnline:"{{reachable}}/{{total}} plugs online",today:"Today",yesterday:"Yesterday",total:"Total",enablePlugsForSummary:"Enable plugs to see energy summary",addNotificationProvider:"Add",systemBadge:"(System)",creating:"Creating...",changing:"Changing...",deleteUserAndItems:"Delete user AND their items",deleteUserKeepItems:"Delete user, keep items (become ownerless)",ok:"OK",twoFa:{totpTitle:"Authenticator App (TOTP)",totpDesc:"Use an authenticator app like Google Authenticator, Aegis or Authy.",emailOtpTitle:"Email OTP",emailOtpDesc:"Send a one-time code to {{email}} when you log in.",emailOtpNoEmail:"Add an email address to your account to enable this method.",addEmailFirst:"Your account has no email address. Ask an admin to add one before enabling Email OTP.",setupTotp:"Set up Authenticator App",setupAuthApp:"Set up Authenticator App",setupInstructions:"Scan the QR code below with your authenticator app, then confirm with a code.",manualEntry:"Can't scan? Enter this secret manually:",scannedContinue:"I've scanned the code — continue",enterCodeToConfirm:"Enter the 6-digit code from your authenticator app to confirm setup.",activate:"Activate",disableTotp:"Disable Authenticator",disableConfirmHint:"Enter a valid TOTP code or a backup code to disable the authenticator.",totpDisabled:"Authenticator app disabled.",emailOtpEnabled:"Email OTP enabled.",emailOtpDisabled:"Email OTP disabled.",smtpRequired:"Please configure and test SMTP settings first.",invalidCode:"Invalid code. Please try again.",enableEmailOtp:"Enable Email OTP",disableEmailOtp:"Disable Email OTP",emailSetupEnterCode:"A verification code has been sent to your email address. Enter it below to confirm you own this inbox.",verifyAndEnable:"Verify & Enable",emailDisablePasswordHint:"Enter your account password to confirm disabling email OTP.",passwordPlaceholder:"Enter your password",backupCodesTitle:"Save your backup codes",backupCodesWarning:"Save these codes somewhere safe. Each code can only be used once and they will not be shown again.",backupCodesRemaining:"{{count}} backup codes remaining",savedCodes:"I've saved my codes",regenBackup:"Regenerate Backup Codes",regenBackupHint:"Enter your current TOTP code to generate 10 new backup codes. All existing backup codes will be invalidated.",newBackupCodes:"New backup codes",linkedAccounts:"Linked SSO Accounts",linkedAccountsDesc:"These external identity providers are linked to your account.",oidcUnlinked:"Account unlinked."},oidc:{title:"SSO / OIDC Providers",desc:"Configure OpenID Connect providers to allow single sign-on via external identity providers.",addProvider:"Add Provider",newProvider:"New Provider",empty:"No OIDC providers configured yet.",created:"Provider created.",updated:"Provider updated.",deleted:"Provider deleted.",deleteTitle:"Delete Provider",deleteMessage:'Delete "{{name}}"? All linked user accounts will be disconnected.',form:{name:"Display Name",issuerUrl:"Issuer URL",clientId:"Client ID",clientSecret:"Client Secret",scopes:"Scopes",iconUrl:"Icon URL (optional)",enabled:"Enabled",autoCreate:"Auto-create users",autoCreateDesc:"Automatically create a local account on first login.",autoLink:"Auto-link existing accounts",autoLinkDesc:"Link existing local accounts by matching email on first login.",secretHint:"leave blank to keep current",secretPlaceholder:"new secret"}}},notification:{printStarted:{title:"Print Started",body:"{{printer}}: {{filename}} has started printing"},printCompleted:{title:"Print Completed",body:"{{printer}}: {{filename}} completed successfully"},printFailed:{title:"Print Failed",body:"{{printer}}: {{filename}} has failed"},printStopped:{title:"Print Stopped",body:"{{printer}}: {{filename}} was stopped"},printProgress:{title:"Print Progress",body:"{{printer}}: {{filename}} is {{percent}}% complete"},printerOffline:{title:"Printer Offline",body:"{{printer}} is offline"},printerError:{title:"Printer Error",body:"{{printer}}: {{error}}"},filamentLow:{title:"Low Filament",body:"{{printer}}: Filament is running low"},maintenanceDue:{title:"Maintenance Due",body:"{{printer}}: {{items}} need attention"}},errors:{generic:"Something went wrong",networkError:"Network error. Please check your connection.",notFound:"Not found",unauthorized:"Unauthorized",serverError:"Server error",validationError:"Please check your input",printerConnectionFailed:"Failed to connect to printer",saveFailed:"Failed to save changes",deleteFailed:"Failed to delete",loadFailed:"Failed to load data"},hmsErrors:{title:"Errors - {{name}}",noErrors:"No errors",viewOnWiki:"View on Bambu Lab Wiki",clearInstructions:"Clear errors on the printer to dismiss them here.",clearErrors:"Clear Errors",clearSuccess:"HMS errors cleared",clearFailed:"Failed to clear HMS errors"},mqttDebug:{title:"MQTT Debug Log",searchPlaceholder:"Search topic or payload...",noMessages:"No messages logged yet",startLoggingHint:'Click "Start Logging" to begin capturing MQTT messages',noMessagesMatch:"No messages match your filter",adjustFilterHint:"Try adjusting your search or filter criteria",incoming:"Incoming",outgoing:"Outgoing",loggingStopped:"Logging stopped",loggingActive:"Logging active - messages will auto-refresh",startLogging:"Start Logging",stopLogging:"Stop Logging",clearLog:"Clear Log",topic:"Topic",timestamp:"Timestamp",direction:"Direction",all:"All"},printerFiles:{title:"File Manager",storageUsed:"Used:",storageFree:"Free:",filterPlaceholder:"Filter files...",deleteButton:"Delete",deleteFiles:"Delete {{count}} Files",deleteFileConfirm:'Delete "{{name}}"? This cannot be undone.',deleteFilesConfirm:"Delete {{count}} selected files? This cannot be undone.",noFiles:"No files on printer",loadingFiles:"Loading files...",failedToLoad:"Failed to load files",toast:{filesDeleted:"Deleted {{count}} file(s)",deleteFailed:"Delete failed: {{error}}"}},confirm:{delete:"Are you sure you want to delete this?",unsavedChanges:"You have unsaved changes. Are you sure you want to leave?",clearQueue:"Are you sure you want to clear the queue?"},login:{title:"Bambuddy Login",subtitle:"Sign in to your account",username:"Username",usernamePlaceholder:"Enter your username",usernameOrEmail:"Username or Email",usernameOrEmailPlaceholder:"Username or @ Email",password:"Password",passwordPlaceholder:"Enter your password",signIn:"Sign in",signingIn:"Logging in...",forgotPassword:"Forgot your password?",loginSuccess:"Logged in successfully",loginFailed:"Login failed",enterCredentials:"Please enter username and password",enterEmail:"Please enter your email address",oidcLoginFailed:"OIDC login failed",oidcErrors:{providerError:"The identity provider returned an error",missingParameters:"OIDC callback is missing required parameters",invalidState:"OIDC state is invalid or has already been used",stateExpired:"OIDC login session expired — please try again",providerNotFound:"OIDC provider not found",discoveryFailed:"Failed to fetch OIDC discovery document",invalidDiscovery:"OIDC discovery document is invalid",networkError:"Network error during OIDC token exchange",badResponse:"Unexpected response during OIDC token exchange",noIdToken:"OIDC provider did not return an ID token",validationFailed:"OIDC token validation failed",nonceMismatch:"OIDC nonce mismatch — possible replay attack",missingSubClaim:"OIDC token is missing the sub claim",noLinkedAccount:"No local account is linked to this OIDC identity",accountInactive:"Your account is inactive",userResolutionFailed:"Failed to resolve your account",internalError:"An internal error occurred during OIDC login",tokenExchangeFailed:"OIDC token exchange failed"},forgotPasswordTitle:"Forgot Password",forgotPasswordMessage:"If you've forgotten your password, please contact your system administrator to reset it.",forgotPasswordEmailMessage:"Enter your email address and we'll send you a new password.",emailAddress:"Email Address",emailPlaceholder:"your.email@example.com",cancel:"Cancel",sending:"Sending...",sendResetEmail:"Send Reset Email",howToReset:"How to reset your password:",resetStep1:"Contact your Bambuddy administrator",resetStep2:"Ask them to reset your password in User Management",resetStep3:"They can set a new temporary password for you",resetStep4:"Log in with the new password and change it in Settings",gotIt:"Got it",resetPassword:{title:"Set New Password",subtitle:"Enter and confirm your new password below.",newPassword:"New Password",newPasswordPlaceholder:"At least 8 characters",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Repeat new password",saving:"Saving…",submit:"Set New Password",backToLogin:"Back to login",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 8 characters",resetFailed:"Password reset failed. The link may have expired."},twoFA:{title:"Two-Factor Authentication",subtitle:"Your account is protected with 2FA. Enter the verification code below.",methodAuthenticator:"Authenticator App",methodEmail:"Email Code",methodBackup:"Backup Code",instructionsTotp:"Open your authenticator app and enter the 6-digit code for Bambuddy.",instructionsEmail:"A 6-digit code has been sent to your email address. It expires in 10 minutes.",instructionsEmailNotSent:"Click the button below to receive a verification code via email.",instructionsBackup:"Enter one of your 8-character backup recovery codes. Each code can only be used once.",sendCodeButton:"Send Code via Email",sendingCode:"Sending...",resendCode:"Resend code",codeLabel:"Verification Code",backupCodeLabel:"Backup Code",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verify",verifyingButton:"Verifying...",backToLogin:"← Back to login",orContinueWith:"or continue with",signInWith:"Sign in with {{provider}}",enterCode:"Please enter the verification code",sendCodeFailed:"Failed to send verification code",invalidCode:"Invalid code. Please try again."}},setup:{title:"Bambuddy Setup",subtitle:"Configure authentication for your Bambuddy instance",enableAuth:"Enable Authentication",adminAccount:"Admin Account",adminAccountDesc:"If admin users already exist, authentication will be enabled using the existing admin accounts. Leave the fields below empty to use existing admins, or enter new credentials to create a new admin user.",adminUsername:"Admin Username",adminPassword:"Admin Password",optionalIfAdminExists:"(optional if admin users exist)",adminUsernamePlaceholder:"Enter admin username (optional)",adminPasswordPlaceholder:"Enter admin password (optional)",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm admin password",settingUp:"Setting up...",completeSetup:"Complete Setup",toast:{authEnabledAdminCreated:"Authentication enabled and admin user created",authEnabledExistingAdmins:"Authentication enabled using existing admin users",setupCompleted:"Setup completed",enterBothCredentials:"Please enter both admin username and password, or leave both empty to use existing admin users",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters"}},changePassword:{title:"Change Password",currentPassword:"Current Password",currentPasswordPlaceholder:"Enter current password",newPassword:"New Password",newPasswordPlaceholder:"Enter new password (min 6 characters)",confirmPassword:"Confirm New Password",confirmPasswordPlaceholder:"Confirm new password",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters",changing:"Changing...",success:"Password changed successfully",failed:"Failed to change password"},plateAlert:{title:"Print Paused!",message:"Objects detected on build plate. The print has been automatically paused. Please clear the plate and resume the print.",understand:"I Understand"},camera:{title:"Camera View",invalidPrinterId:"Invalid printer ID",live:"Live",snapshot:"Snapshot",restartStream:"Restart stream",refreshSnapshot:"Refresh snapshot",fullscreen:"Fullscreen",exitFullscreen:"Exit fullscreen",connectingToCamera:"Connecting to camera...",capturingSnapshot:"Capturing snapshot...",connectionLost:"Connection lost",connectionFailed:"Camera connection failed",reconnecting:"Reconnecting in {{countdown}}s... (attempt {{attempt}}/{{max}})",reconnectNow:"Reconnect now",cameraUnavailable:"Camera unavailable",cameraUnavailableDesc:"Make sure the printer is powered on and connected.",noCamera:"No camera available",retry:"Retry",cameraStream:"Camera stream",zoomOut:"Zoom out",zoomIn:"Zoom in",resetZoom:"Reset zoom",recording:"Recording",startRecording:"Start Recording",stopRecording:"Stop Recording",chamberLight:"Toggle chamber light"},groups:{title:"Group Management",subtitle:"Manage permission groups for access control",backToSettings:"Back to Settings",createGroup:"Create Group",noPermission:"You do not have permission to access this page.",system:"System",noDescription:"No description",usersCount:"{{count}} users",permissionsCount:"{{count}} permissions",edit:"Edit",delete:"Delete",toast:{created:"Group created successfully",updated:"Group updated successfully",deleted:"Group deleted successfully",enterGroupName:"Please enter a group name"},modal:{editGroup:"Edit Group",createGroup:"Create Group",cancel:"Cancel",saving:"Saving...",creating:"Creating...",saveChanges:"Save Changes"},form:{groupName:"Group Name",groupNamePlaceholder:"Enter group name",systemGroupWarning:"System group names cannot be changed",description:"Description",descriptionPlaceholder:"Enter description (optional)",permissions:"Permissions ({{count}} selected)"},deleteModal:{title:"Delete Group",message:"Are you sure you want to delete this group? Users in this group will lose these permissions.",confirm:"Delete Group"},editor:{title:"Edit Group",createTitle:"Create Group",search:"Search permissions...",selectAll:"Select All",clearAll:"Clear All",permissionsSelected:"{{count}} selected",noResults:"No permissions match your search"}},users:{title:"User Management",subtitle:"Manage users and their access to your Bambuddy instance",backToSettings:"Back to Settings",createUser:"Create User",noPermission:"You do not have permission to access this page.",admin:"Admin",noGroups:"No groups",active:"Active",inactive:"Inactive",edit:"Edit",delete:"Delete",system:"System",noGroupsAvailable:"No groups available",table:{username:"Username",groups:"Groups",status:"Status",actions:"Actions"},toast:{created:"User created successfully",updated:"User updated successfully",deleted:"User deleted successfully",fillRequired:"Please fill in all required fields",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters"},modal:{createUser:"Create User",editUser:"Edit User",cancel:"Cancel",creating:"Creating...",saving:"Saving...",saveChanges:"Save Changes",advancedAuthSubtitle:"with Advanced Authentication"},form:{username:"Username",usernamePlaceholder:"Enter username",email:"Email",emailPlaceholder:"user@example.com",password:"Password",passwordPlaceholder:"Enter password",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm password",newPasswordPlaceholder:"Enter new password",confirmNewPasswordPlaceholder:"Confirm new password",leaveBlankToKeep:"leave blank to keep current",groups:"Groups",optional:"optional",autoGeneratedPassword:"A secure password will be automatically generated and emailed to the user.",passwordManagedByAdvancedAuth:'Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.',resetPassword:"Reset Password",resettingPassword:"Resetting Password..."},deleteModal:{title:"Delete User",message:"Are you sure you want to delete this user? This action cannot be undone.",confirm:"Delete User"}},streamOverlay:{title:"Stream Overlay",invalidPrinterId:"Invalid printer ID",cameraStream:"Camera stream",progress:"Progress",eta:"ETA",printerIdle:"Printer is idle",printerOffline:"Printer offline",status:{printing:"Printing",paused:"Paused",finished:"Finished",failed:"Failed",idle:"Idle",unknown:"Unknown"}},profiles:{title:"Profiles",subtitle:"Manage your slicer presets and pressure advance calibrations",tabs:{cloud:"Cloud Profiles",local:"Local Profiles",kprofiles:"K-Profiles"},localProfiles:{title:"Local Profiles",subtitle:"Import and manage slicer presets from OrcaSlicer",import:"Import Profiles",importDesc:"Drop .bbscfg, .bbsflmt, .orca_filament, .zip, or .json files here",importing:"Importing...",search:"Search local presets...",noPresets:"No local presets yet",badge:"Local",edit:"Edit",delete:"Delete",cancel:"Cancel",deleteConfirmTitle:"Delete Preset",deleteConfirm:"Are you sure you want to delete this preset? This cannot be undone.",source:"Source",inheritsFrom:"Inherits",filamentType:"Type",vendor:"Vendor",compatiblePrinters:"Printers",nozzleTemp:"Nozzle Temp",cost:"Cost",density:"Density",pressureAdvance:"Pressure Advance",filament:"Filament",process:"Process",printer:"Printer",toast:{importSuccess:"{{count}} preset(s) imported",importSkipped:"{{count}} preset(s) skipped (duplicates)",importError:"{{count}} error(s) during import",deleted:"Preset deleted",updated:"Preset updated"}},connectedAs:"Connected as",logout:"Logout",noLogoutPermission:"You do not have permission to logout",failedToLoad:"Failed to load profiles",retry:"Retry",time:{justNow:"Just now",minsAgo:"{{count}}m ago",hoursAgo:"{{count}}h ago",daysAgo:"{{count}}d ago"},toast:{loggedOut:"Logged out"},login:{title:"Connect to Bambu Cloud",subtitle:"Sync your slicer presets across devices",email:"Email",password:"Password",region:"Region",regionGlobal:"Global",regionChina:"China",verificationCode:"Verification Code",totpCode:"Authenticator Code",checkEmail:"Check your email ({{email}}) for a 6-digit code",enterTotpHint:"Enter the 6-digit code from your authenticator app",accessToken:"Access Token",accessTokenHint:"Paste your Bambu Lab access token (from Bambu Studio)",back:"Back",loginButton:"Login",verifyButton:"Verify",setTokenButton:"Set Token",useToken:"Use access token instead",useEmail:"Login with email instead",toast:{loggedIn:"Logged in successfully",codeSent:"Verification code sent to your email",enterTotp:"Enter code from your authenticator app",tokenSet:"Token set successfully"}},presets:{myPreset:"My preset (editable)",duplicate:"Duplicate",editable:"Editable",failedToLoadDetails:"Failed to load preset details",deleteConfirm:"Delete this preset?",deleteWarning:'This will permanently delete "{{name}}" from Bambu Cloud. This cannot be undone.',noDuplicatePermission:"You do not have permission to duplicate presets",noEditPermission:"You do not have permission to edit presets",noDeletePermission:"You do not have permission to delete presets",types:{filament:"Filament preset",printer:"Printer preset",process:"Process preset"},toast:{deleted:"Preset deleted",created:"Preset created",updated:"Preset updated",duplicated:"Preset duplicated",fieldAdded:'Field "{{key}}" added',exported:"Preset exported"},baseLabel:"Base: {{name}}",currentLabel:"Current: {{name}}",newPreset:"New Preset",editPreset:"Edit Preset",duplicatePreset:"Duplicate Preset",createNewPreset:"Create New Preset",customizeSettings:"Customize settings for your new preset",compareWithBase:"Compare with base preset",compare:"Compare",basePreset:"Base Preset",selectBasePreset:"Select base preset...",presetName:"Preset Name",myCustomPreset:"My custom preset",inheritsFrom:"Inherits from",dropJsonToImport:"Drop JSON to import",tabs:{common:"Common",allFields:"All Fields"},availableFields:"Available Fields",searchFieldsPlaceholder:"Search fields...",noMatchingFields:"No matching fields",allFieldsAdded:"All fields added",addCustomField:"Add custom field",yourOverrides:"Your Overrides",noOverridesYet:"No overrides yet",clickFieldsToAdd:"Click fields on the left to add them",saveAsTemplate:"Save as template",jsonTip:"Tip: Drag & drop a .json file anywhere on this modal to import settings"},cloudView:{searchPlaceholder:"Search presets...",templates:"Templates",refresh:"Refresh",newPreset:"New Preset",clearFilters:"Clear filters",compareMode:"Compare Mode",selectAnotherPreset:"Select another {{type}} preset",clickTwoPresets:"Click two presets of the same type to compare",selectFirst:"1. Select first",selectSecond:"2. Select second",compareNow:"Compare Now",lastSynced:"Last synced:",showingCount:"Showing {{showing}} of {{total}} presets",noPresetsFound:"No presets found",columns:{filament:"Filament",process:"Process",printer:"Printer"},noFilamentPresets:"No filament presets",noProcessPresets:"No process presets",noPrinterPresets:"No printer presets",filters:{type:"Type",owner:"Owner",printer:"Printer",nozzle:"Nozzle",filament:"Filament",layer:"Layer",all:"All",myPresets:"My Presets",builtIn:"Built-in",process:"Process"},noTemplatesPermission:"You do not have permission to manage templates",noRefreshPermission:"You do not have permission to refresh profiles",noCreatePermission:"You do not have permission to create presets"},templates:{title:"Quick Templates",noTemplates:"No templates yet",createFirst:"Create templates from the preset editor",typeFilter:"Type:",deleteTitle:"Delete Template",deleteWarning:"This action cannot be undone",deleteConfirm:'Are you sure you want to delete "{{name}}"?',namePlaceholder:"Template name",descriptionPlaceholder:"Description",settingsJson:"Settings (JSON)",fieldsCount:"{{count}} fields",shownInModals:"Shown in modals",hiddenInModals:"Hidden in modals",apply:"Apply",toast:{deleted:"Template deleted",updated:"Template updated",created:"Template created",applied:"Template applied"}}},support:{debugLoggingActive:"Debug logging is active",manageLogs:"Manage",collectItem7:"Printer connectivity and firmware versions",collectItem8:"Integration status (Spoolman, MQTT, HA)",collectItem9:"Network interfaces (subnets only)",collectItem10:"Python package versions",collectItem11:"Database health checks",collectItem12:"Docker environment details"},fileManager:{title:"File Manager",subtitle:"Organize and manage your print files",uploadFiles:"Upload Files",newFolder:"New Folder",folderName:"Folder Name",folderNamePlaceholder:"e.g., Functional Parts",renameFile:"Rename File",renameFolder:"Rename Folder",moveFiles:"Move {{count}} File(s)",rootNoFolder:"Root (No Folder)",current:"current",linkFolder:"Link Folder",linkFolderDescription:'Link "{{name}}" to a project or archive for quick access.',project:"Project",archive:"Archive",noProjectsFound:"No projects found",noArchivesFound:"No archives found",unlink:"Unlink",link:"Link",dragDropFiles:"Drag & drop files here",dropFilesHere:"Drop files here",orClickToBrowse:"or click to browse",allFileTypesSupported:"All file types supported. ZIP files will be extracted.",zipFilesDetected:"ZIP files detected",zipExtractOptions:"ZIP files will be extracted. Choose how to handle folder structure:",preserveZipStructure:"Preserve folder structure from ZIP",createFolderFromZip:"Create folder from ZIP filename",stlThumbnailGeneration:"STL thumbnail generation",zipMayContainStl:"ZIP files may contain STL files. Thumbnails can be generated during extraction.",thumbnailsCanBeGenerated:"Thumbnails can be generated for STL files. Large models may take longer to process.",generateThumbnailsForStl:"Generate thumbnails for STL files",threemfDetected:"3MF files detected",threemfExtractionInfo:"Printer model, material, color, and print settings will be automatically extracted from 3MF files.",willBeExtracted:"Will be extracted",filesExtracted:"{{count}} files extracted",uploadComplete:"Upload complete: {{succeeded}} succeeded",uploadFailed:"Upload failed",zipFilesFailed:"{{count}} files failed",uploading:"Uploading...",changeLink:"Change Link...",linkTo:"Link to...",linkToProjectOrArchive:"Link to project or archive",addToQueue:"Add to Queue",schedulePrint:"Schedule",generateThumbnail:"Generate Thumbnail",generateThumbnails:"Generate Thumbnails",generateThumbnailsForMissing:"Generate thumbnails for STL files missing them",gridView:"Grid view",listView:"List view",lowDiskSpaceWarning:"Low disk space warning",lowDiskSpaceDetails:"Only {{free}} free of {{total}} total. Threshold is set to {{threshold}} GB in settings.",files:"Files",folders:"Folders",size:"Size",free:"Free",allFiles:"All Files",wrap:"Wrap",enableTextWrapping:"Enable text wrapping",disableTextWrapping:"Disable text wrapping",dragToResizeTooltip:"Drag to resize, double-click to reset",searchFiles:"Search files...",allTypes:"All types",prints:"Prints",ascending:"Ascending",descending:"Descending",resultsCount:"{{showing}} of {{total}} files",selectAll:"Select All",deselectAll:"Deselect All",selected:"{{count}} selected",adding:"Adding...",loadingFiles:"Loading files...",folderIsEmpty:"Folder is empty",noFilesYet:"No files yet",folderEmptyDescription:"Upload files or move files into this folder to get started.",noFilesDescription:"Upload files to start organizing your print-related files.",noMatchingFiles:"No matching files",noMatchingFilesDescription:"No files match your current search or filter criteria.",clearFilters:"Clear filters",printedCount:"Printed {{count}}x",uploadedBy:"Uploaded By",deleteFolder:"Delete Folder",deleteFile:"Delete File",deleteFilesCount:"Delete {{count}} Files",deleteFolderConfirm:"Are you sure you want to delete this folder? All files inside will also be deleted.",deleteFileConfirm:"Are you sure you want to delete this file?",deleteFilesConfirm:"Are you sure you want to delete {{count}} selected files? This action cannot be undone.",deleting:"Deleting...",noPermissionRenameFolder:"You do not have permission to rename folders",noPermissionLinkFolder:"You do not have permission to link folders",noPermissionDeleteFolder:"You do not have permission to delete folders",noPermissionPrint:"You do not have permission to print",noPermissionAddToQueue:"You do not have permission to add to queue",noPermissionDownload:"You do not have permission to download files",noPermissionRenameFile:"You do not have permission to rename this file",noPermissionGenerateThumbnail:"You do not have permission to generate thumbnails",noPermissionDeleteFile:"You do not have permission to delete this file",noPermissionCreateFolder:"You do not have permission to create folders",noPermissionUpload:"You do not have permission to upload files",noPermissionMoveFiles:"You do not have permission to move files",noPermissionDeleteFiles:"You do not have permission to delete files",linkExternal:"Link External",linkExternalFolder:"Link External Folder",linkExternalFolderDescription:"Mount a host directory (NAS, USB, network share) into the File Manager. Files are not copied — they are accessed directly from the original path.",externalFolderNamePlaceholder:"e.g., NAS Prints",externalPath:"Host Path",externalPathHelp:"Absolute path to the directory on the Docker host. Must be bind-mounted into the container.",readOnly:"Read Only",readOnlyHelp:"prevents uploads and deletions",showHiddenFiles:"Show hidden files (dotfiles)",externalFolder:"External Folder",scanFolder:"Scan",toast:{folderCreated:"Folder created",folderDeleted:"Folder deleted",fileDeleted:"File deleted",filesDeleted:"Deleted {{count}} files",filesMoved:"Files moved",folderLinked:"Folder linked",folderUnlinked:"Folder unlinked",externalFolderLinked:"External folder linked and scanned",folderScanned:"Scan complete: {{added}} added, {{removed}} removed",addedToQueue:"Added {{count}} file(s) to queue",addedToQueuePartial:"Added {{added}} file(s), {{failed}} failed",failedToAddToQueue:"Failed to add files: {{error}}",fileRenamed:"File renamed",folderRenamed:"Folder renamed",thumbnailsGenerated:"Generated {{count}} thumbnail(s)",thumbnailsGeneratedPartial:"Generated {{succeeded}} thumbnail(s), {{failed}} failed",noStlMissingThumbnails:"No STL files missing thumbnails",failedToGenerateThumbnails:"Failed to generate thumbnails: {{error}}",thumbnailGenerated:"Thumbnail generated",failedToGenerateThumbnail:"Failed to generate thumbnail: {{error}}"}},projects:{title:"Projects",subtitle:"Organize and track your 3D printing projects",newProject:"New Project",editProject:"Edit Project",deleteProject:"Delete Project",projectName:"Project Name",description:"Description",noProjects:"No projects yet",noProjectsFiltered:"No {{status}} projects",noProjectsFilteredHelp:"You don't have any {{status}} projects. Projects will appear here when their status changes.",createFirst:"Create your first project to start organizing related prints, tracking progress, and managing your builds.",createFirstButton:"Create Your First Project",create:"Create",files:"Files",prints:"Prints",plates:"plates",parts:"parts",lastModified:"Last Modified",deleteConfirm:"Are you sure you want to delete this project? Archives and queue items will be unlinked but not deleted.",addFiles:"Add Files",removeFile:"Remove File",viewDetails:"View Details",namePlaceholder:"e.g., Voron 2.4 Build",descriptionPlaceholder:"Optional description...",color:"Color",targetPlates:"Target Plates",targetPlatesPlaceholder:"e.g., 25",targetPlatesHelp:"Number of print jobs",targetParts:"Target Parts",targetPartsPlaceholder:"e.g., 150",targetPartsHelp:"Total objects needed",tagsLabel:"Tags (comma-separated)",tagsPlaceholder:"e.g., voron, functional, gift",dueDate:"Due Date",priority:"Priority",priorityLow:"Low",priorityNormal:"Normal",priorityHigh:"High",priorityUrgent:"Urgent",statusActive:"Active",statusCompleted:"Completed",statusArchived:"Archived",done:"Done",completed:"completed",failed:"failed",inQueue:"in queue",noPrintsYet:"No prints yet",printJobs:"Print jobs (plates)",partsPrinted:"Parts printed",failedParts:"Failed parts",import:"Import",export:"Export",importProject:"Import project",exportAll:"Export all projects",loading:"Loading projects...",noEditPermission:"You do not have permission to edit projects",noDeletePermission:"You do not have permission to delete projects",noCreatePermission:"You do not have permission to create projects",noImportPermission:"You do not have permission to import projects",noExportPermission:"You do not have permission to export projects",toast:{created:"Project created",updated:"Project updated",deleted:"Project deleted",imported:"Project imported",multipleImported:"{{count}} projects imported",importFailed:"Import failed",exported:"Projects exported (metadata only)"}},projectDetail:{notFound:"Project not found",backToProjects:"Back to Projects",export:"Export",exportProject:"Export project",noExportPermission:"You do not have permission to export projects",noEditPermission:"You do not have permission to edit projects",partOf:"Part of:",priorityLabel:"Priority:",noPrints:"No prints in this project yet",status:{active:"Active",completed:"Completed",archived:"Archived"},priority:{low:"Low",normal:"Normal",high:"High",urgent:"Urgent"},dueDate:{overdue:"Overdue",today:"Due today",daysLeft:"{{count}} days left"},progress:{platesProgress:"Plates Progress",partsProgress:"Parts Progress",printJobs:"print jobs",parts:"parts",percentComplete:"{{percent}}% complete",remaining:"{{count}} remaining"},stats:{printJobs:"Print Jobs",total:"total",failed:"{{count}} failed",partsPrinted:"{{count}} parts printed",printTime:"Print Time",filamentUsed:"Filament Used"},cost:{title:"Cost Tracking",filamentCost:"Filament Cost",energy:"Energy",totalCost:"Total Cost",total:"Total",includesBom:"incl. BOM",budget:"Budget",remaining:"Remaining"},subProjects:{title:"Sub-projects ({{count}})"},notes:{title:"Notes",noEditPermission:"You do not have permission to edit notes",placeholder:"Add notes about this project...",empty:"No notes yet. Click Edit to add notes."},files:{title:"Files",linkFolders:"Link folders from the File Manager",forQuickAccess:"to this project for quick access.",fileCount:"{{count}} file(s)",empty:"No folders linked. Go to File Manager and link a folder to this project.",noFiles:"No files in this folder.",print:"Print Now",addToQueue:"Add to Queue"},bom:{title:"Bill of Materials",acquired:"{{completed}}/{{total}} acquired",showAll:"Show all",hideDone:"Hide done",addPart:"Add Part",noAddPermission:"You do not have permission to add parts",partNamePlaceholder:"Part name (e.g., M3x8 screws)",partName:"Part name",qty:"Qty",price:"Price ({{currency}})",sourcingUrlPlaceholder:"Sourcing URL (optional)",remarksPlaceholder:"Remarks (optional)",deletePart:"Delete Part",deleteConfirm:'Are you sure you want to delete "{{name}}"?',noUpdatePermission:"You do not have permission to update parts",noEditPermission:"You do not have permission to edit parts",noDeletePermission:"You do not have permission to delete parts",totalCost:"Total cost:",empty:"No parts in the bill of materials. Add hardware, electronics, or other components to track what needs to be sourced."},timeline:{title:"Activity Timeline",empty:"No activity yet."},template:{saveAsTemplate:"Save as Template",noCreatePermission:"You do not have permission to create templates"},queue:{title:"Queue",viewAll:"View all",printing:"{{count}} printing",queued:"{{count}} queued"},prints:{title:"Prints ({{count}})"},toast:{projectUpdated:"Project updated",partAdded:"Part added",partRemoved:"Part removed",exportFailed:"Export failed",projectExported:"Project exported",templateCreated:"Template created"}},system:{title:"System Information",version:"Version",uptime:"Uptime",cpuUsage:"CPU Usage",memoryUsage:"Memory Usage",diskUsage:"Disk Usage",networkInfo:"Network Info",logs:"Logs",debugMode:"Debug Mode",enableDebug:"Enable Debug Logging",disableDebug:"Disable Debug Logging",downloadLogs:"Download Logs",clearLogs:"Clear Logs",dockerInfo:"Docker Info",containerName:"Container Name",imageName:"Image Name",platform:"Platform",architecture:"Architecture"},library:{title:"Filament Library",addFilament:"Add Filament",editFilament:"Edit Filament",deleteFilament:"Delete Filament",vendor:"Vendor",material:"Material",color:"Color",kFactor:"K Factor",temperature:"Temperature",noFilaments:"No filaments in library",deleteConfirm:"Are you sure you want to delete this filament?",importFromPrinter:"Import from Printer",exportToFile:"Export to File"},spoolman:{title:"Spoolman Integration",enabled:"Spoolman Enabled",url:"Spoolman URL",connected:"Connected",disconnected:"Not Connected",testConnection:"Test Connection",sync:"Sync",syncing:"Syncing...",lastSync:"Last Sync",linkToSpoolman:"Link to Spoolman",openInSpoolman:"Open in Spoolman",unlinkSpool:"Unlink Spool",unlinkConfirmTitle:"Unlink Spool?",unlinkConfirmMessage:"This will disconnect the spool from Spoolman. The spool data in Spoolman will remain unchanged.",selectSpool:"Select Spool",noUnlinkedSpools:"No unlinked spools available",linkSuccess:"Spool linked to Spoolman successfully",linkFailed:"Failed to link spool",unlinkSuccess:"Spool unlinked from Spoolman successfully",unlinkFailed:"Failed to unlink spool",spoolId:"Spool ID",fillSourceLabel:"(Spoolman)",weight:"Weight",remaining:"Remaining",disableWeightSync:"Disable AMS Estimated Weight Sync",disableWeightSyncDesc:"Don't update remaining capacity from AMS estimates. Use this if you prefer Spoolman's usage tracking over AMS percentage-based estimates. New spools will still use the AMS estimate as their initial weight.",reportPartialUsage:"Report Partial Usage for Failed Prints",reportPartialUsageDesc:"When a print fails or is cancelled, report the estimated filament used up to that point based on layer progress."},inventory:{title:"Spool Inventory",addSpool:"Add Spool",editSpool:"Edit Spool",material:"Material",selectMaterial:"Select material...",subtype:"Subtype",brand:"Brand",searchBrand:"Search brand...",useCustomBrand:'Use "{{brand}}"',useCustomMaterial:"Use custom material: {{material}}",colorName:"Color Name",colorNamePlaceholder:"Jade White, Fire Red...",color:"Color",hexColor:"Hex Color",pickColor:"Pick custom color",labelWeight:"Label Weight",coreWeight:"Empty Spool Weight",searchSpoolWeight:"Search spool weight...",weightUsed:"Used",currentWeight:"Remaining Weight",measuredWeight:"Measured Weight",spoolName:"Spool",costPerKg:"Cost per kg",measuredWeightError:"Measured weight must be between {{min}}g and {{max}}g.",slicerFilament:"Slicer Filament",slicerFilamentName:"Slicer Preset Name",slicerPreset:"Slicer Preset",searchPresets:"Search filament presets...",selectedPreset:"Selected",noPresetsFound:"No presets found",tempOverrides:"Temperature Overrides",note:"Note",notePlaceholder:"Any additional notes about this spool...",archive:"Archive",restore:"Restore",noSpools:"No spools yet. Add your first spool to get started.",noManualSpools:"No manually added spools available. Add a spool to your inventory first.",kProfiles:"K-Profiles",addKProfile:"Add K-Profile",assignSpool:"Assign Spool",unassignSpool:"Unassign",assignSuccess:"Spool assigned and AMS slot configured",assignFailed:"Failed to assign spool",selectSpool:"Select a spool to assign to this slot",assigned:"Assigned",assigning:"Assigning...",searchSpools:"Search spools...",showAllSpools:"Show all spools",allMaterials:"All Materials",filterByBrand:"Filter by brand...",showArchived:"Show archived",quickAdd:"Quick Add (Stock)",quantity:"Quantity",stock:"Stock",configured:"Configured",spoolsCreated:"{{count}} spools created",spoolCreated:"Spool created",spoolUpdated:"Spool updated",spoolDeleted:"Spool deleted",spoolArchived:"Spool archived",spoolRestored:"Spool restored",deleteConfirm:"Are you sure you want to delete this spool? This cannot be undone.",archiveConfirm:"Are you sure you want to archive this spool?",advancedSettings:"Advanced Settings",filamentInfoTab:"Filament Info",paProfileTab:"PA Profile",filamentInfo:"Filament",additional:"Additional",loadingPresets:"Loading cloud presets...",cloudConnected:"Cloud connected",cloudNotConnected:"Cloud not connected (using defaults)",recentColors:"Recent",searchColors:"Search colors...",searchResults:"Search results",allColors:"All colors",commonColors:"Common colors",showLess:"Show less",showAll:"Show all",noColorsFound:"No colors match your search",noResults:"No matches found",selectMaterialFirst:"Please select a material first in the Filament Info tab.",noPrintersConfigured:"No printers configured. Add printers to use PA profiles.",matchingFilter:"Matching",anyBrand:"Any brand",anyVariant:"Any variant",autoSelect:"Auto-select",matches:"matches",match:"match",noMatches:"No matches",connected:"Connected",offline:"Offline",printerOffline:"Printer is offline. Connect to view calibration profiles.",noKProfilesMatch:"No K-profiles match the selected filament.",leftNozzle:"Left Nozzle",rightNozzle:"Right Nozzle",profilesSelected:"calibration profile(s) selected",totalInventory:"Total Inventory",totalConsumed:"Total Consumed",byMaterial:"By Material",inPrinter:"In Printer",lowStock:"Low Stock",sinceTracking:"Since tracking started",loadedInAms:"Loaded in AMS/Ext",remaining:"Remaining",weightCheck:"Weight Check",lastWeighed:"Last weighed",neverWeighed:"Never weighed",search:"Search spools...",showing:"Showing",to:"to",of:"of",show:"Show",spools:"spools",spool:"spool",page:"Page",noSpoolsMatch:"No results found",noSpoolsMatchDesc:"Try adjusting your search or filters to find what you're looking for.",active:"Active",archived:"Archived",all:"All",used:"Used",new:"New",clearFilters:"Clear filters",table:"Table",cards:"Cards",net:"Net",groupSimilar:"Group",groupedSpools:"{{count}} identical spools",groupedRows:"rows",columns:"Columns",configureColumns:"Configure Columns",configureColumnsDesc:"Drag to reorder columns or use arrows. Toggle visibility with the eye icon.",visible:"visible",reset:"Reset",cancel:"Cancel",applyChanges:"Apply Changes",moveUp:"Move up",moveDown:"Move down",hideColumn:"Hide column",showColumn:"Show column",linkToSpool:"Link to Spool",tagLinked:"Tag linked to spool",tagLinkFailed:"Failed to link tag",tagAlreadyLinked:"Tag already linked to another spool",unknownTag:"Unknown RFID tag detected",usageHistory:"Usage History",noUsageHistory:"No usage recorded yet",printName:"Print Name",weightConsumed:"Weight Consumed",clearHistory:"Clear",historyCleared:"Usage history cleared",fillSourceLabel:"(Inv)",lowStockThresholdError:"Threshold must be between 0.1 and 99.9",assignMismatchTitle:"Material mismatch",assignMismatchMessage:'The selected spool material "{{spoolMaterial}}" does not match the tray material "{{trayMaterial}}" for {{location}}. Assign anyway?',assignMismatchConfirm:"Assign Anyway",assignPartialMismatchMessage:'The spool material "{{spoolMaterial}}" is similar to but not exactly matching "{{trayMaterial}}" in {{location}}. Do you want to proceed?',assignProfileMismatchMessage:'The spool profile "{{spoolProfile}}" does not match the tray profile "{{trayProfile}}" in {{location}}. Do you want to proceed?'},timelapse:{title:"Timelapse",create:"Create Timelapse",download:"Download",delete:"Delete",preview:"Preview",frameRate:"Frame Rate",quality:"Quality",processing:"Processing...",noTimelapses:"No timelapses available"},ams:{title:"AMS",slot:"Slot",empty:"Empty",emptySlot:"Empty slot",unknown:"Unknown",humidity:"Humidity",temperature:"Temperature",filamentType:"Filament Type",filamentColor:"Color",remaining:"Remaining",history:"AMS History",noHistory:"No history available",configureSlot:"Configure Slot",externalSpool:"External Spool",profile:"Profile",kFactor:"K Factor",fill:"Fill",configure:"Configure",used:"used",remainingUnit:"remaining"},printModal:{title:"Start Print",selectPrinter:"Select Printer",selectPlate:"Select Plate",filamentMapping:"Filament Mapping",totalCost:"Total cost:",slotRemainingShort:" - {{grams}}g left",printSettings:"Print Settings",bedLeveling:"Bed Leveling",flowCalibration:"Flow Calibration",vibrationCalibration:"Vibration Calibration",layerInspection:"First Layer Inspection",timelapse:"Timelapse",startPrint:"Start Print",addToQueue:"Add to Queue",cancel:"Cancel",noPrintersAvailable:"No printers available",printerBusy:"Printer is busy",printerOffline:"Printer is offline",sameTypeDifferentColor:"Same type, different color",filamentTypeNotLoaded:"Filament type not loaded",openCalendar:"Open calendar",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Left nozzle",rightNozzleTooltip:"Right nozzle",filamentOverride:"Filament Override",filamentOverrideHint:"Optionally override filaments for model-based assignment. The scheduler will match against your selected filaments instead of the original 3MF values.",originalFilament:"Original",overrideWith:"Override with",resetToOriginal:"Reset to original",insufficientFilamentTitle:"Not enough filament",insufficientFilamentMessage:"Some assigned spools have less filament remaining than this print needs:",insufficientFilamentLine:"{{printer}} - {{slot}}: needs {{required}}g, remaining {{remaining}}g",printAnyway:"Print anyway",forceColorMatch:"Force color match",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Stagger to {{count}} printers",gcodeInjection:"Inject auto-print G-code"},backup:{title:"Backup & Restore",createBackup:"Create Backup",restoreBackup:"Restore Backup",restoreDescription:"Replace all data from a backup file",downloadBackup:"Download Backup",uploadBackup:"Upload Backup",lastBackup:"Last Backup",autoBackup:"Auto Backup",backupNow:"Backup Now",restoreWarning:"Warning: Restoring a backup will overwrite all current data.",includeArchives:"Include Archives",includeSettings:"Include Settings",includeProfiles:"Include Profiles",backupSuccess:"Backup created successfully",restoreSuccess:"Backup restored successfully",backupFailed:"Backup failed",restoreFailed:"Restore failed",restoreNote:"Virtual Printer will be stopped during restore",githubBackup:"GitHub Backup",enabled:"Enabled",cloudLoginRequired:"Bambu Cloud login required. Sign in under Profiles → Cloud Profiles to enable GitHub backup.",cloudLoginRequiredShort:"Cloud login required",githubDescription:"Automatically sync your profiles to a private GitHub repository for backup and version history.",repositoryUrl:"Repository URL",personalAccessToken:"Personal Access Token",tokenSaved:"(saved)",enterNewToken:"Enter new token to update",tokenHint:"Fine-grained token with Contents read/write permission",branch:"Branch",manualOnly:"Manual only",hourly:"Hourly",daily:"Daily",weekly:"Weekly",includeInBackup:"Include in backup",kProfiles:"K-Profiles",kProfilesDescription:"Pressure advance calibration from connected printers",noPrintersConnected:"No printers connected",printersConnected:"{{connected}}/{{total}} connected",cloudProfiles:"Cloud Profiles",cloudProfilesDescription:"Filament, printer, and process presets from Bambu Cloud",appSettings:"App Settings",appSettingsDescription:"Bambuddy configuration (complete database)",spoolInventory:"Spool Inventory",spoolInventoryDescription:"Filament spools, usage history, and cost tracking",printArchives:"Print Archives",printArchivesDescription:"Print history metadata (no gcode/3MF files)",lastBackupAt:"Last backup:",noBackupsYet:"No backups yet",next:"Next:",startingBackup:"Starting backup...",test:"Test",enableBackup:"Enable Backup",testConnection:"Test Connection",enterRepoUrl:"Enter repository URL",enterRepoAndToken:"Enter repository URL and access token",repoRequired:"Repository URL is required",tokenRequired:"Access token is required",githubBackupEnabled:"GitHub backup enabled",tokenUpdated:"Token updated",settingsSaved:"Settings saved",failedToSave:"Failed to save: {{message}}",backupCompleteFiles:"Backup complete - {{count}} files updated",backupSkippedNoChanges:"Backup skipped - no changes",backupFailed2:"Backup failed: {{message}}",clearedLogs:"Cleared {{count}} logs",failedToClearLogs:"Failed to clear logs: {{message}}",history:"History",clear:"Clear",date:"Date",status:"Status",commit:"Commit",localBackup:"Local Backup",localBackupDescription:"Create a complete backup of your Bambuddy data including the database, archives, uploads, and all files.",downloadBackupLabel:"Download Backup",completeBackupZip:"Complete backup: database + all files (ZIP)",download:"Download",preparingBackup:"Preparing backup...",creatingArchive:"Creating backup archive... This may take a while for large archives.",downloadingFile:"Downloading backup file...",backupDownloaded:"Backup downloaded successfully",failedToCreateBackup:"Failed to create backup: {{message}}",restore:"Restore",restoreReplacesAll:"Restore replaces all data.",restoreReplacesAllDetail:"Your current database and files will be completely replaced. A restart is required after restore.",restoreConfirmTitle:"Restore Backup",restoreConfirmMessage:'Are you sure you want to restore from "{{filename}}"? This will completely replace your current database and all files. The application will need to be restarted after restore.',restoreConfirmButton:"Restore Backup",uploadingFile:"Uploading backup file...",backupRestoredRestart:"Backup restored. Please restart Bambuddy.",failedToRestore:"Failed to restore backup. Please check the file format.",reloadNow:"Reload Now",creatingBackup:"Creating Backup",restoringBackup:"Restoring Backup",preparing:"Preparing...",processing:"Processing...",doNotClosePage:"Please do not close this page or navigate away. This operation may take several minutes for large backups.",restoring:"Restoring...",restoreComplete:"Restore Complete",restoreFailed2:"Restore Failed",importSettings:"Import settings from a backup file",pleaseWaitRestoring:"Please wait while your data is being restored",selectBackupFile:"Click to select backup file (.json or .zip)",duplicateHandling:"How duplicate handling works:",matchPrinters:"Printers",matchPrintersBy:"matched by serial number",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"matched by IP address",matchNotificationProviders:"Notification Providers",matchNotificationProvidersBy:"matched by name",matchFilaments:"Filaments",matchFilamentsBy:"matched by name + type + brand",matchArchives:"Archives",matchArchivesBy:"matched by content hash (always skipped)",matchPendingUploads:"Pending Uploads",matchPendingUploadsBy:"matched by filename",matchSettingsTemplates:"Settings & Templates",matchSettingsTemplatesBy:"always overwritten",replaceExisting:"Replace existing data",keepExisting:"Keep existing data",overwriteDescription:"Overwrite items that already exist with backup data",keepDescription:"Only restore items that don't already exist",overwriteCaution:"Caution:",overwriteWarning:"Overwriting will replace your current configurations with data from the backup. Printer access codes are never overwritten for security.",cancel:"Cancel",processingBackup:"Processing backup file...",itemsRestored:"Items Restored",itemsSkipped:"Items Skipped",restored:"Restored",skippedAlreadyExist:"Skipped (already exist)",filesCategory:"Files (3MF, thumbnails, etc.)",andMore:"...and {{count}} more",newApiKeysGenerated:"New API Keys Generated",keysShownOnce:"These keys are only shown once. Copy them now!",copy:"Copy",noDataFound:"No data was found to restore in the backup file.",close:"Close",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Settings",notification_providers:"Notification Providers",notification_templates:"Notification Templates",smart_plugs:"Smart Plugs",printers:"Printers",filaments:"Filaments",maintenance_types:"Maintenance Types",archives:"Archives",projects:"Projects",pending_uploads:"Pending Uploads",external_links:"External Links",api_keys:"API Keys"}},tags:{title:"Tags",addTag:"Add Tag",editTag:"Edit Tag",deleteTag:"Delete Tag",tagName:"Tag Name",tagColor:"Tag Color",noTags:"No tags",deleteConfirm:"Are you sure you want to delete this tag?",manageTags:"Manage Tags"},uploadModal:{title:"Upload 3MF Files",dragDrop:"Drag & drop .3mf files here",or:"or",browseFiles:"Browse Files",extractionInfo:"The printer model will be automatically extracted from the 3MF file metadata.",uploaded:"uploaded",failed:"failed",uploading:"Uploading...",upload:"Upload",uploadFailed:"Upload failed"},editArchive:{title:"Edit Archive",name:"Name",namePlaceholder:"Print name",printer:"Printer",noPrinter:"No printer",project:"Project",noProject:"No project",itemsPrinted:"Items Printed",itemsPrintedHelp:"Number of items produced in this print job",notes:"Notes",notesPlaceholder:"Add notes about this print...",externalLink:"External Link",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link to Printables, Thingiverse, or other source",tags:"Tags",tagsPlaceholder:"Add tags...",addMoreTags:"Add more tags...",matchingTags:'Matching "{{query}}"',existingTags:"Existing tags",clickToAdd:"(click to add)",status:"Status",failureReason:"Failure Reason",selectReason:"Select reason...",photos:"Photos of Printed Result",photosHelp:"Click + to add photos of your printed result",printResult:"Print result",saving:"Saving...",failureReasons:{adhesionFailure:"Adhesion failure",spaghettiDetached:"Spaghetti / Detached",layerShift:"Layer shift",cloggedNozzle:"Clogged nozzle",filamentRunout:"Filament runout",warping:"Warping",stringing:"Stringing",underExtrusion:"Under-extrusion",powerFailure:"Power failure",userCancelled:"User cancelled",other:"Other"},statuses:{completed:"Completed",failed:"Failed",aborted:"Cancelled",printing:"Printing"}},kProfiles:{title:"K-Profiles",noPrintersConfigured:"No Printers Configured",addPrinterInSettings:"Add a printer in Settings to manage K-profiles",noActivePrinters:"No Active Printers",enablePrinterConnection:"Enable a printer connection to view its K-profiles",loadingProfiles:"Loading K-Profiles...",printerOffline:"Printer Offline",printerOfflineDesc:"The selected printer is not connected. Power it on to view K-profiles.",noMatchingProfiles:"No Matching Profiles",noMatchingProfilesDesc:"No profiles match your search criteria",noKProfiles:"No K-Profiles",noKProfilesDesc:"No pressure advance profiles found for {{diameter}}mm nozzle",createFirstProfile:"Create First Profile",printer:"Printer",nozzle:"Nozzle",refresh:"Refresh",addProfile:"Add Profile",export:"Export",import:"Import",select:"Select",selectAll:"Select All",delete:"Delete",searchPlaceholder:"Search by name or filament...",allExtruders:"All Extruders",leftOnly:"Left Only",rightOnly:"Right Only",allFlow:"All Flow",hfOnly:"HF Only",sOnly:"S Only",sortName:"Sort: Name",sortKValue:"Sort: K-Value",sortFilament:"Sort: Filament",leftExtruder:"Left Extruder",rightExtruder:"Right Extruder",modal:{addTitle:"Add K-Profile",editTitle:"Edit K-Profile",profileName:"Profile Name",profileNamePlaceholder:"My PLA Profile",kValue:"K-Value",kValuePlaceholder:"0.020",kValueHelp:"Typical range: 0.01 - 0.06 for PLA, 0.02 - 0.10 for PETG",filament:"Filament",selectFilament:"Select filament...",noFilamentsHelp:"No filaments found. Create a K-profile in Bambu Studio first.",flowType:"Flow Type",highFlow:"High Flow",standard:"Standard",nozzleSize:"Nozzle Size",extruder:"Extruder",extruders:"Extruders",left:"Left",right:"Right",notes:"Notes (stored locally)",notesPlaceholder:"Add notes about this profile...",notesHelp:"Notes are saved in Bambuddy, not on the printer",syncing:"Syncing with printer...",savingExtruder:"Saving to extruder {{current}}/{{total}}...",pleaseWait:"Please wait"},deleteConfirm:{title:"Delete Profile",cannotUndo:"This cannot be undone",message:'Are you sure you want to delete "{{name}}" from the printer?'},bulkDelete:{title:"Delete Profiles",cannotUndo:"This cannot be undone",message:"Are you sure you want to delete {{count}} selected profiles from the printer?"},toast:{profileSaved:"K-profile saved",profilesSaved:"K-profile saved to {{count}} extruders",selectAtLeastOneExtruder:"Please select at least one extruder",profileDeleted:"K-profile deleted",profilesDeleted:"Deleted {{count}} profiles",exportedProfiles:"Exported {{count}} profiles",importedProfiles:"Imported {{count}} of {{total}} profiles",noProfilesToExport:"No profiles to export",invalidFileFormat:"Invalid file format",failedToParseImport:"Failed to parse import file",failedToSaveBatch:"Failed to save K-profiles",noteSaved:"Note saved",failedToSaveNote:"Failed to save note"},permission:{noRead:"You do not have permission to refresh profiles",noCreate:"You do not have permission to add profiles",noUpdate:"You do not have permission to update K-profiles",noDelete:"You do not have permission to delete K-profiles",noExport:"You do not have permission to export profiles",noImport:"You do not have permission to import profiles"}},virtualPrinter:{title:"Virtual Printer",running:"Running",stopped:"Stopped",description:{default:"Enable a virtual printer that appears in Bambu Studio and OrcaSlicer. Files sent to this printer will be archived directly without printing.",proxy:"Enable a proxy that relays slicer traffic to a real printer, allowing remote printing over any network."},enable:{title:"Enable Virtual Printer",visibleInSlicer:'Visible as "Bambuddy" in slicer discovery',proxyingTo:"Proxying to {{name}}",notActive:"Not active"},model:{title:"Printer Model",description:"Select which printer model to emulate.",restartWarning:"Changing the model will restart the virtual printer"},accessCode:{title:"Access Code",isSet:"Access code is set",notSet:"No access code set - required to enable",placeholder:"Enter 8-char code",placeholderChange:"Enter new code to change",hint:"Must be exactly 8 characters. Used by slicers to authenticate.",charCount:"({{count}}/8)"},targetPrinter:{title:"Target Printer",configured:"Proxy target configured",notConfigured:"No target printer selected - required for proxy mode",placeholder:"Select a printer...",hint:"Select the printer to proxy slicer traffic to. The printer must be in LAN mode.",noPrinters:"No printers configured. Add a printer first to use proxy mode."},remoteInterface:{title:"Network Interface Override",configured:"Interface override active",optional:"Optional - use if auto-detected IP is wrong (e.g. multiple NICs, Docker, VPN)",placeholder:"Auto-detect (default)...",hint:"Override the IP address advertised via SSDP and used in the TLS certificate. Useful when Bambuddy has multiple network interfaces."},mode:{title:"Mode",archive:"Archive",archiveDesc:"Archive files immediately",review:"Review",reviewDesc:"Review before archiving",queue:"Queue",queueDesc:"Archive and add to queue",proxy:"Proxy",proxyDesc:"Relay to real printer"},autoDispatch:{title:"Auto-dispatch",description:"Automatically start prints when added to queue. When off, prints wait for manual dispatch."},setupRequired:{title:"Setup Required",description:"The virtual printer feature requires additional system configuration before it will work. This includes port forwarding, firewall rules, and platform-specific settings.",readGuide:"Read the setup guide before enabling"},howItWorks:{title:"How it works",step1:"On the same LAN, virtual printers appear in your slicer (Bambu Studio / OrcaSlicer) automatically via discovery. From other networks, add them manually by IP address and access code.",step2:'In Archive, Review, and Queue modes, use the "Send" button in your slicer to upload 3MF files to Bambuddy. The slicer will show "Print success" — the file is stored, not printed.',step3:"In Proxy mode, the virtual printer relays all traffic to a real printer — prints start immediately as if connected directly."},status:{title:"Status Details",printerName:"Printer Name",model:"Model",serialNumber:"Serial Number",mode:"Mode",pendingFiles:"Pending Files",targetPrinter:"Target Printer",ftpPort:"FTP Port",mqttPort:"MQTT Port",ftpConnections:"FTP Connections",mqttConnections:"MQTT Connections"},toast:{updated:"Virtual printer settings updated",failedToUpdate:"Failed to update settings",accessCodeRequired:"Please set an access code first",targetPrinterRequired:"Please select a target printer first",bindIpRequired:"Please set a bind IP first",accessCodeEmpty:"Access code cannot be empty",accessCodeLength:"Access code must be exactly 8 characters",created:"Virtual printer created",failedToCreate:"Failed to create virtual printer",deleted:"Virtual printer deleted",failedToDelete:"Failed to delete virtual printer"},list:{title:"Virtual Printers",add:"Add",addFirst:"Add Virtual Printer",empty:"No virtual printers configured. Add one to get started."},bindIp:{title:"Bind Interface",placeholder:"Select interface...",hint:"Network interface for this virtual printer to bind to. Must be unique per printer."},proxy:{accessCodeHint:"In proxy mode, use your target printer's access code in the slicer. The connection is forwarded transparently to the real printer."},addDialog:{title:"Add Virtual Printer",name:"Name",hint:"You can configure access code, target printer, and other settings after creating.",create:"Create"},deleteConfirm:{title:"Delete Virtual Printer",message:'Are you sure you want to delete "{{name}}"? This will stop all services for this printer.'}},modelViewer:{openInSlicer:"Open in Slicer",tabs:{model:"3D Model",gcode:"G-code Preview"},notAvailable:"not available",notSliced:"not sliced",plates:"Plates",allPlates:"All Plates",plateNumber:"Plate {{number}}",plateCount:"{{count}} plate",plateCount_other:"{{count}} plates",objectCount:"{{count}} object",objectCount_other:"{{count}} objects",filamentCount:"{{count}} filament",filamentCount_other:"{{count}} filaments",eta:"ETA {{minutes}} min",noPreview:"No preview available for this file",pagination:{pageOf:"Page {{current}} of {{total}}",prev:"Prev",next:"Next"},errors:{failedToLoad:"Failed to load file",noMeshes:"No meshes found in 3MF file",unsupportedFormat:"Unsupported file format"}},maintenanceDescriptions:{lubricateCarbonRods:"Apply lubricant to carbon rods for smooth motion",lubricateRails:"Apply lubricant to linear rails for smooth motion",cleanNozzle:"Clean hotend and nozzle to prevent clogs",checkBelts:"Verify belt tension for accurate prints",cleanBuildPlate:"Clean build plate for better adhesion",checkExtruder:"Inspect extruder gears for wear",checkCooling:"Ensure cooling fans are working properly",generalInspection:"General printer inspection",cleanCarbonRods:"Clean carbon rods to reduce friction",lubricateSteelRods:"Apply lubricant to steel rods for smooth motion",cleanSteelRods:"Clean steel rods to reduce friction",cleanLinearRails:"Wipe linear rails to remove dust and debris",checkPtfeTube:"Inspect PTFE tube for wear or damage",replaceHepaFilter:"Replace HEPA filter for air quality",replaceCarbonFilter:"Replace activated carbon filter",lubricateLeftNozzleRail:"Lubricate left nozzle rail (H2 series)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Open plug admin page",deleteSmartPlug:"Delete Smart Plug",turnOnSmartPlug:"Turn On Smart Plug",turnOffSmartPlug:"Turn Off Smart Plug",turnOn:"Turn On",turnOff:"Turn Off",addSmartPlug:{scanningNetwork:"Scanning network...",chooseEntity:"Choose an entity...",connectionFailed:"Connection failed",searchEntities:"Search entities...",searchPowerSensors:"Search power sensors...",searchEnergySensors:"Search energy sensors...",placeholders:{plugName:"Living Room Plug",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Same as power topic, or different"}},linkedTo:"Linked to:",monitorOnly:"Monitor Only",alerts:"Alerts",scheduleOn:"On {{time}}",scheduleOff:"Off {{time}}",on:"On",off:"Off",power:"Power",kwhToday:"kWh Today",settings:"Settings",automationSettings:"Automation Settings",showInSwitchbar:"Show in Switchbar",quickAccessSidebar:"Quick access from sidebar",enabled:"Enabled",enableAutomation:"Enable automation for this plug",autoOn:"Auto On",autoOnDescription:"Turn on when print starts",autoOff:"Auto Off",autoOffDescription:"Turn off when print completes (one-shot)",autoOffPersistent:"Keep Enabled",autoOffPersistentDescription:"Stay enabled between prints instead of one-shot",turnOffDelayMode:"Turn Off Delay Mode",time:"Time",temp:"Temp",delayMinutes:"Delay (minutes)",tempThreshold:"Temperature threshold (°C)",tempThresholdDescription:"Turns off when nozzle cools below this temperature",edit:"Edit",deleteConfirm:'Are you sure you want to delete "{{name}}"? This cannot be undone.',turnOnConfirm:'Are you sure you want to turn on "{{name}}"?',turnOffConfirm:'Are you sure you want to turn off "{{name}}"? This will cut power to the connected device.',failedToTurn:'Failed to turn {{action}} "{{name}}"',unknown:"Unknown",addTitle:"Add Smart Plug",editTitle:"Edit Smart Plug",stopScanning:"Stop Scanning",discoverTasmota:"Discover Tasmota Devices",foundDevices:"Found {{count}} device(s) - click to select:",noDevicesFound:"No Tasmota devices found on your network",haNotConfigured:"Home Assistant is not configured. Set it up in",haSettingsPath:"Settings → Network → Home Assistant",selectEntity:"Select Entity *",ipAddress:"IP Address *",nameLabel:"Name *",username:"Username",password:"Password",authHint:"Leave empty if your Tasmota device doesn't require authentication",linkToPrinter:"Link to Printer",noPrinter:"No printer (manual control only)",linkingDescription:"Linking enables automatic on/off when prints start/complete",powerAlerts:"Power Alerts",alertAbove:"Alert if above (W)",alertBelow:"Alert if below (W)",alertDescription:"Get notified when power consumption crosses these thresholds. Leave empty to disable that direction.",dailySchedule:"Daily Schedule",turnOnAt:"Turn On at",turnOffAt:"Turn Off at",scheduleDescription:"Automatically turn the plug on/off at these times daily. Leave empty to skip that action.",showOnPrinterCard:"Show on Printer Card",displayOnPrinterCard:"Display button on printer card",connectedResult:"Connected!",deviceLabel:"Device: {{name}} - ",stateLabel:"State: {{state}}",test:"Test",delete:"Delete",save:"Save",add:"Add",cancel:"Cancel",failedToStartScan:"Failed to start scan",nameRequired:"Name is required",entityRequired:"Entity is required for Home Assistant plugs",mqttTopicRequired:"At least one MQTT topic must be configured for power, energy, or state monitoring",loadingEntities:"Loading entities...",loading:"Loading...",failedToLoadEntities:"Failed to load entities: {{error}}",noEntitiesMatching:'No entities found matching "{{search}}"',noEntitiesAvailable:"No entities available",searchingEntities:"Searching all entities ({{count}} found)",showingEntities:"Showing switch, light, input_boolean ({{count}} available)",energyMonitoringOptional:"Energy Monitoring (Optional)",energyMonitoringHint:"Search and select sensors that provide power/energy data.",powerSensorW:"Power Sensor (W)",energyTodayKwh:"Energy Today (kWh)",totalEnergyKwh:"Total Energy (kWh)",noMatchingSensors:"No matching sensors",none:"None",mqttNotConfigured:"MQTT broker not configured. Set broker address in",mqttSettingsPath:"Settings → Network → MQTT Publishing",mqttNotConfiguredSuffix:"(you don't need to enable publishing, just fill in the broker details).",mqttMonitorOnlyDescription:"MQTT plugs receive power/energy data via MQTT subscription. On/off control is not available - use your MQTT broker or home automation system.",powerMonitoring:"Power Monitoring",energyMonitoring:"Energy Monitoring",stateMonitoring:"State Monitoring",optional:"optional",topic:"Topic",jsonPath:"JSON Path",multiplier:"Multiplier",onValue:"ON Value",mqttPowerHint:`JSON path extracts value from JSON payload (e.g., "power_l1"). Leave empty if topic publishes raw numeric values. Use multiplier 0.001 for mW→W, 1000 for kW→W.`,mqttEnergyHint:`JSON path extracts value from JSON payload. Leave empty for raw values. Use multiplier 0.001 for Wh→kWh, 1000 for MWh→kWh.`,mqttStateHint:`JSON path extracts value from JSON payload. Leave empty for raw values. ON value: the exact string that means "ON". Leave empty for auto-detect (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"Power URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"Power Multiplier",restEnergyUrl:"Energy URL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Energy Multiplier",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"Separate URL for power data (uses Status URL if empty)",restEnergyUrlHint:"Separate URL for energy data (uses Status URL if empty)",restEnergyHint:"Each value can use its own URL or fall back to the Status URL. Use multipliers for unit conversion (e.g. 0.001 to convert Wh to kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"No switches in switchbar",enableSwitchbarHint:'Enable "Show in Switchbar" in Settings > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"Email",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP email notifications",telegram:"Notifications via Telegram bot",discord:"Send to Discord channel via webhook",ntfy:"Free, self-hostable push notifications",pushover:"Simple, reliable push notifications",callmebot:"Free WhatsApp notifications via CallMeBot",webhook:"Generic HTTP POST to any URL",homeassistant:"Persistent notifications in Home Assistant dashboard"},lastSuccess:"Last: {{date}}",error:"Error",printer:"Printer:",allPrinters:"All printers",sendTestNotification:"Send Test Notification",eventSettings:"Event Settings",enabled:"Enabled",sendFromProvider:"Send notifications from this provider",printEvents:"Print Events",printerStatus:"Printer Status",amsAlarms:"AMS Alarms",amsHtAlarms:"AMS-HT Alarms",printQueue:"Print Queue",start:"Start",plateCheck:"Plate Check",complete:"Complete",failed:"Failed",stopped:"Stopped",progress:"Progress",offline:"Offline",lowFilament:"Low Filament",maintenance:"Maintenance",amsHumidity:"AMS Humidity",amsTemp:"AMS Temp",amsHtHumidity:"AMS-HT Humidity",amsHtTemp:"AMS-HT Temp",bedCooled:"Bed Cooled",firstLayer:"First Layer",quiet:"Quiet",digest:"Digest {{time}}",printStarted:"Print Started",plateNotEmpty:"Plate Not Empty",plateNotEmptyDescription:"Objects detected before print",printCompleted:"Print Completed",bedCooledLabel:"Bed Cooled",bedCooledDescription:"Bed cooled below threshold after print",firstLayerCompleteLabel:"First Layer Complete",firstLayerCompleteDescription:"Notify with snapshot when first layer finishes",missingSpoolAssignmentLabel:"Missing Spool Assignment",missingSpoolAssignmentDescription:"Notify when print starts and required trays have no assigned spool",printFailed:"Print Failed",printStopped:"Print Stopped",progressMilestones:"Progress Milestones",progressMilestonesDescription:"Notify at 25%, 50%, 75%",printerOffline:"Printer Offline",printerError:"Printer Error",lowFilamentLabel:"Low Filament",maintenanceDue:"Maintenance Due",maintenanceDueDescription:"Notify when maintenance is needed",amsHumidityHigh:"AMS Humidity High",amsHumidityHighDescription:"Regular AMS humidity exceeds threshold",amsTemperatureHigh:"AMS Temperature High",amsTemperatureHighDescription:"Regular AMS temperature exceeds threshold",amsHtHumidityHigh:"AMS-HT Humidity High",amsHtHumidityHighDescription:"AMS-HT humidity exceeds threshold",amsHtTemperatureHigh:"AMS-HT Temperature High",amsHtTemperatureHighDescription:"AMS-HT temperature exceeds threshold",jobAdded:"Job Added",jobAddedDescription:"Job added to queue",jobAssigned:"Job Assigned",jobAssignedDescription:"Model-based job assigned to printer",jobStarted:"Job Started",jobStartedDescription:"Queue job started printing",jobWaiting:"Job Waiting",jobWaitingDescription:"Job waiting for filament or printer",jobSkipped:"Job Skipped",jobSkippedDescription:"Job skipped (previous failed)",jobFailed:"Job Failed",jobFailedDescription:"Job failed to start",queueComplete:"Queue Complete",queueCompleteDescription:"All queue jobs finished",quietHours:"Quiet Hours",noNotificationsDuring:"No notifications during these hours",editProviderToChangeQuietHours:"Edit provider to change quiet hours",dailyDigest:"Daily Digest",batchNotifications:"Batch notifications into a single daily summary",sendAt:"Send at {{time}}",editProviderToChangeDigestTime:"Edit provider to change digest time",edit:"Edit",deleteProvider:"Delete Notification Provider",deleteConfirm:'Are you sure you want to delete "{{name}}"? This cannot be undone.',delete:"Delete",addTitle:"Add Notification Provider",editTitle:"Edit Notification Provider",nameLabel:"Name *",namePlaceholder:"My Notifications",providerTypeLabel:"Provider Type *",configuration:"Configuration",testConfiguration:"Test Configuration",printerFilter:"Printer Filter",onlyFromPrinter:"Only send notifications for events from this printer",quietHoursDnd:"Quiet Hours (Do Not Disturb)",quietStart:"Start",quietEnd:"End",dailyDigestLabel:"Daily Digest",sendDigestAt:"Send digest at",digestCollected:"Events will be collected and sent as a single summary at this time",notificationEvents:"Notification Events",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(after print completes)",cancel:"Cancel",save:"Save",add:"Add",nameRequired:"Name is required",fieldRequired:"{{field}} is required",phoneNumber:"Phone Number",apiKey:"API Key",serverUrl:"Server URL",topic:"Topic",authToken:"Auth Token",userKey:"User Key",appToken:"App Token",priority:"Priority",botToken:"Bot Token",chatId:"Chat ID",smtpServer:"SMTP Server",smtpPort:"SMTP Port",security:"Security",authentication:"Authentication",username:"Username",password:"Password",fromEmail:"From Email",toEmail:"To Email",webhookUrl:"Webhook URL",payloadFormat:"Payload Format",authorization:"Authorization",titleFieldName:"Title Field Name",messageFieldName:"Message Field Name",editTemplate:"Edit Template: {{name}}",titleLabel:"Title",bodyLabel:"Body",titlePlaceholder:"Notification title...",bodyPlaceholder:"Notification body...",availableVariables:"Available Variables",clickToInsert:"Click to insert at cursor position in body",livePreview:"Live Preview",hide:"Hide",show:"Show",loadingPreview:"Loading preview...",enterTemplateContent:"Enter template content to see preview",titlePreview:"Title:",bodyPreview:"Body:",resetToDefault:"Reset to Default",titleRequired:"Title is required",bodyRequired:"Body is required",notificationLog:"Notification Log",showFailedOnly:"Failed only",last24Hours:"Last 24 hours",last7Days:"Last 7 days",last30Days:"Last 30 days",last90Days:"Last 90 days",justNow:"Just now",noFailedNotifications:"No failed notifications",noNotificationsLogged:"No notifications logged",unknownProvider:"Unknown Provider",logTitle:"Title",logMessage:"Message",logError:"Error",logProvider:"Provider: {{type}}",logTime:"Time: {{time}}",refresh:"Refresh",clearOld:"Clear Old",statsSummary:"Last {{days}} days:",statsNotifications:"notifications",statsSent:"{{count}} sent",statsFailed:"{{count}} failed",eventTypes:{print_start:"Print Started",print_complete:"Print Complete",print_failed:"Print Failed",print_stopped:"Print Stopped",print_progress:"Progress",printer_offline:"Printer Offline",printer_error:"Printer Error",filament_low:"Low Filament",maintenance_due:"Maintenance Due",test:"Test"},userEmail:{title:"Notifications",emailNotifications:"Email Notifications",emailNotificationsDesc:"Receive email notifications for your own print jobs. Emails are sent using the system SMTP settings configured in Advanced Authentication.",sendingTo:"Notifications will be sent to",noEmailWarning:"Your account does not have an email address. Contact an administrator to add one.",printJobNotifications:"Print Job Notifications",printJobNotificationsDesc:"Choose which events trigger email notifications for print jobs you submit.",printJobStarts:"Print Job Starts",printJobStartsDesc:"Get notified when your print job begins.",printJobFinishes:"Print Job Finishes",printJobFinishesDesc:"Get notified when your print job completes successfully.",printErrors:"Print Errors",printErrorsDesc:"Get notified when your print job fails or encounters an error.",printJobStops:"Print Job Stops",printJobStopsDesc:"Get notified when your print job is cancelled or stopped.",saveSuccess:"Notification preferences saved.",saveError:"Failed to save notification preferences."}},richTextEditor:{bold:"Bold",italic:"Italic",underline:"Underline",bulletList:"Bullet List",numberedList:"Numbered List",alignLeft:"Align Left",alignCenter:"Align Center",alignRight:"Align Right",addLink:"Add Link",removeLink:"Remove Link"},externalLinks:{noLinksConfigured:"No external links configured",deleteLink:"Delete Link",removeCustomIcon:"Remove custom icon",openInNewTab:"Open in new tab",placeholders:{linkName:"My Link"}},keyboardShortcuts:{title:"Keyboard Shortcuts",navigation:"Navigation",archivesSection:"Archives",kProfilesSection:"K-Profiles",generalSection:"General",shortcuts:{goToPrinters:"Go to Printers",goToArchives:"Go to Archives",goToQueue:"Go to Queue",goToStats:"Go to Statistics",goToProfiles:"Go to Cloud Profiles",goToSettings:"Go to Settings",focusSearch:"Focus search",openUploadModal:"Open upload modal",clearSelection:"Clear selection / blur input",contextMenu:"Context menu on cards",refreshProfiles:"Refresh profiles",newProfile:"New profile",exitSelectionMode:"Exit selection mode",showHelp:"Show this help"},footer:"Press Esc or click outside to close"},notificationLog:{title:"Notification Log",events:{printStarted:"Print Started",printComplete:"Print Complete",printFailed:"Print Failed",printStopped:"Print Stopped",progress:"Progress",printerOffline:"Printer Offline",printerError:"Printer Error",lowFilament:"Low Filament",maintenanceDue:"Maintenance Due",test:"Test"},timeAgo:{justNow:"Just now",minutesAgo:"{{minutes}}m ago",hoursAgo:"{{hours}}h ago"}},restoreBackup:{title:"Restore Backup",restoring:"Restoring...",restoreComplete:"Restore Complete",restoreFailed:"Restore Failed",importSettings:"Import settings from a backup file",pleaseWait:"Please wait while your data is being restored",clickToSelect:"Click to select backup file (.json or .zip)",howDuplicateHandling:"How duplicate handling works:",categories:{printers:"Printers",smartPlugs:"Smart Plugs",notificationProviders:"Notification Providers",filaments:"Filaments",archives:"Archives",pendingUploads:"Pending Uploads",settingsTemplates:"Settings & Templates"},matchingInfo:{printers:"matched by serial number",smartPlugs:"matched by IP address",notificationProviders:"matched by name",filaments:"matched by name + type + brand",archives:"matched by content hash",pendingUploads:"matched by filename",settingsTemplates:"always overwritten"},replaceExisting:"Replace existing data",keepExisting:"Keep existing data",replaceDescription:"Overwrite items that already exist with backup data",keepDescription:"Only restore items that don't already exist",caution:"Caution:",cautionText:"Overwriting will replace your current configurations with backup data. Printer access codes are never overwritten for security.",itemsRestored:"Items Restored",itemsSkipped:"Items Skipped",restored:"Restored",skipped:"Skipped (already exist)",filesLabel:"Files (3MF, thumbnails, etc.)",newApiKeysGenerated:"New API Keys Generated",newApiKeysWarning:"These keys are only shown once. Copy them now!",processingBackup:"Processing backup file...",noDataFound:"No data was found to restore in the backup file.",failedToRestore:"Failed to restore backup. Please check the file format."},backupExport:{title:"Export Backup",selectData:"Select data to include",selectAll:"Select All",selectNone:"Select None",categoryDescriptions:{settings:"Language, theme, update preferences",notifications:"ntfy, Pushover, Discord, etc.",templates:"Custom message templates",smartPlugs:"Tasmota plug configurations",externalLinks:"Sidebar links to external services",printers:"Printer info (access codes excluded)",plateDetection:"Empty plate reference images",filaments:"Filament types and costs",maintenance:"Custom maintenance schedules",archives:"All print data + files (3MF, thumbnails, photos)",projects:"Projects, BOM items, and attachments",pendingUploads:"Virtual printer uploads awaiting review",apiKeys:"Webhook API keys (new keys generated on import)"},requiresPrinters:"Requires Printers to be selected",zipFileWarning:"ZIP file will be created.",zipFileDescription:"Includes all 3MF files, thumbnails, timelapses, and photos. This may take a while and result in a large file.",includeAccessCodes:"Include Access Codes",includeAccessCodesDescription:"For transferring to another machine",includeAccessCodesWarning:"Access codes will be included in plain text. Keep this backup file secure!",categoriesSelected:"{{selectedCount}} categories selected"},pendingUploads:{placeholders:{notes:"Add notes about this print..."},discardUpload:"Discard Upload",archiveAllUploads:"Archive All Uploads",discardAllUploads:"Discard All Uploads",archive:"Archive",timeAgo:{justNow:"Just now",minutesAgo:"{{minutes}}m ago",hoursAgo:"{{hours}}h ago",daysAgo:"{{days}}d ago"}},apiBrowser:{placeholders:{requestBody:"JSON request body...",searchEndpoints:"Search endpoints..."}},configureAmsSlot:{title:"Configure AMS Slot",slotConfigured:"Slot Configured!",configuringSlot:"Configuring slot:",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Search presets...",colorPlaceholder:"Color name or hex (e.g., brown, FF8800)",clearCustomColor:"Clear custom color",noCloudPresets:"No cloud presets. Login to Bambu Cloud to sync.",noPresetsAvailable:"No presets available. Login to Bambu Cloud or import local profiles.",noMatchingPresets:"No matching presets found.",custom:"Custom",builtin:"Built-in",settingsSentToPrinter:"Settings sent to printer",filamentProfile:"Filament Profile",kProfileLabel:"K Profile (Pressure Advance)",filteringFor:"Filtering for: {{material}}",noKProfile:"No K profile (use default 0.020)",noMatchingKProfiles:"No matching K profiles found. Default K=0.020 will be used.",selectFilamentFirst:"Select a filament profile first",kFromCalibration:"K={{value}} from printer calibration",customColorLabel:"Custom Color (optional)",presetColors:"{{name}} colors:",showLessColors:"Show less colors",showMoreColors:"Show more colors",clear:"Clear",hexLabel:"Hex: #{{hex}}",resetting:"Resetting...",resetSlot:"Reset Slot",cancel:"Cancel",configuring:"Configuring...",configureSlot:"Configure Slot"},githubBackup:{title:"GitHub Backup",history:"History",downloadBackup:"Download Backup",restoreBackup:"Restore Backup",noBackupsYet:"No backups yet"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Search tags...",renameTag:"Rename tag",deleteTag:"Delete tag"},notificationTemplates:{placeholders:{title:"Notification title...",body:"Notification body..."}},batchTag:{placeholders:{newTag:"Enter new tag..."}},photoGallery:{deletePhoto:"Delete Photo"},filamentHoverCard:{copySpoolUuid:"Copy spool UUID"},kProfilesView:{hasNote:"Has note",copyProfile:"Copy profile"},layout:{openMenu:"Open menu",noPermissionSystemInfo:"You do not have permission to view system information"},dashboard:{dragToReorder:"Drag to reorder",hideWidget:"Hide widget"},notificationProviderCard:{deleteNotificationProvider:"Delete Notification Provider"},fileManagerModal:{closeFileManager:"Close file manager",sortFiles:"Sort files",goToParentFolder:"Go to parent folder",threeView:"3D View"},embeddedCameraViewer:{refreshStream:"Refresh stream",close:"Close",zoomOut:"Zoom out",resetZoom:"Reset zoom",zoomIn:"Zoom in",dragToResize:"Drag to resize"},timelapseViewer:{skipBack5s:"Skip back 5s",skipForward5s:"Skip forward 5s"},notificationProviders:{descriptions:{email:"SMTP email notifications",telegram:"Notifications via Telegram bot",discord:"Send to Discord channel via webhook",ntfy:"Free, self-hostable push notifications",pushover:"Simple, reliable push notifications",callmebot:"Free WhatsApp notifications via CallMeBot",webhook:"Generic HTTP POST to any URL"}},logViewer:{searchPlaceholder:"Search message or logger name...",noLogEntries:"No log entries found"},switchbarPopover:{noSwitchesInSwitchbar:"No switches in switchbar"},projectPageModal:{placeholders:{title:"Title",designer:"Designer",license:"License",description:"Enter description...",profileTitle:"Profile Title",profileDescription:"Profile description..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Waiting",justNow:"Just now",now:"Now",minsAgo:"{{count}}m ago",inMins:"in {{count}}m",hoursAgo:"{{count}}h ago",inHours:"in {{count}}h",daysAgo:"{{count}}d ago",inDays:"in {{count}}d"},spoolbuddy:{nav:{dashboard:"Dashboard",ams:"AMS",inventory:"Inventory",writeTag:"Write",settings:"Settings"},status:{nfcReady:"NFC Ready",nfcOff:"NFC Off",offline:"Offline",online:"Online",noPrinters:"No printers",deviceOffline:"Device Offline",waitingConnection:"Waiting for device connection...",systemReady:"System Ready",status:"Status"},dashboard:{readyToScan:"Ready to scan",idleMessage:"Place a spool on the scale to identify it",nfcHint:"NFC tag will be read automatically",device:"Device",syncWeight:"Sync Weight",weightSynced:"Synced!",unknownTag:"Unknown Tag",newTag:"New Tag Detected",onScale:"on scale",linkSpool:"Link to Spool",linkTagTitle:"Link Tag to Spool",linkTag:"Link Tag",selectSpool:"Select a spool to link this tag to:",noUntagged:"No spools without tags found",tagDetected:"Tag detected",noTag:"No tag",tagId:"Tag",grossWeight:"Gross weight",spoolSize:"Spool size",close:"Close",currentSpool:"Current Spool"},modal:{spoolDetected:"Spool Detected",assignToAms:"Assign to AMS",syncWeight:"Sync Weight",weightSynced:"Synced!",syncing:"Syncing...",newTagDetected:"New Tag Detected",addToInventory:"Add to Inventory",assignToAmsTitle:"Assign to AMS",selectSlot:"Select a slot",assign:"Assign",assigning:"Assigning...",assignSuccess:"Assigned!",assignError:"Failed to assign spool. Please try again.",noPrinterSelected:"Select a printer...",noAmsDetected:"No AMS detected on this printer",slot:"Slot"},weight:{noReading:"No reading",stable:"Stable",measuring:"Measuring...",tare:"Tare",calibrate:"Calibrate"},spool:{remaining:"Remaining",material:"Material",brand:"Brand",color:"Color",coreWeight:"Core",labelWeight:"Label",scaleWeight:"Scale",netWeight:"Net",lastUsed:"Last used"},ams:{noData:"No AMS detected",connectAms:"Connect an AMS to see filament slots",noPrinter:"No printer selected",selectPrinter:"Select a printer from the top bar",printerDisconnected:"Printer disconnected",humidity:"Humidity",level:"Level",active:"Active",slot:"Slot",empty:"Empty"},inventory:{search:"Search spools...",empty:"No spools in inventory",noResults:"No matching spools",spools:"spools",addSpool:"Add Spool"},settings:{tabDevice:"Device",tabDisplay:"Display",tabScale:"Scale",tabUpdates:"Updates",nfcReader:"NFC Reader",type:"Type",connection:"Connection",notConnected:"N/A",deviceInfo:"Device Info",hostname:"Host",uptime:"Uptime",systemConfig:"Backend & Auth",backendUrl:"Bambuddy Backend URL",apiToken:"API Token",apiTokenPlaceholder:"Enter API token",saveConfig:"Save Config",systemQueued:"Config queued.",nfcDiagnostic:"NFC Diagnostic",scaleDiagnostic:"Scale Diagnostic",readTagDiagnostic:"Read Tag Diagnostic",testNfc:"Test reader",testScale:"Test accuracy",testReadTag:"Read tag",systemFieldsRequired:"Backend URL is required.",brightness:"Brightness",saved:"Saved",noBacklight:"No DSI backlight detected. Brightness control requires a DSI display.",screenBlank:"Screen Blank Timeout",screenBlankDesc:"Screen turns off after inactivity. Touch to wake.",displayNote:"Brightness is applied as a software filter.",scaleCalibration:"Scale Calibration",currentWeight:"Current weight",tareOffset:"Tare",calFactor:"Factor",knownWeight:"Known weight",calStep1:"Remove all items from the scale and press Set Zero.",calStep2:"Place known weight on scale.",setZero:"Set Zero",calibrateNow:"Calibrate",calibrated:"Calibrated",tareSet:"Tare command sent. Waiting for device...",tareFailed:"Failed to send tare command",zeroSet:"Zero point set. Place known weight on scale.",calibrationDone:"Calibration complete!",calibrationFailed:"Calibration failed",lastCalibrated:"Last calibrated",stable:"Stable",settling:"Settling...",firmware:"Firmware",scale:"Scale",noDevice:"No SpoolBuddy device found",daemonVersion:"Daemon Version",currentVersion:"Current",versionPending:"Waiting for daemon...",checking:"Checking...",checkUpdates:"Check for Updates",updateAvailable:"Update available",updateInstructions:"Update via SSH: run the SpoolBuddy install script to upgrade.",upToDate:"Up to date",includeBeta:"Include beta versions"},writeTag:{tabExisting:"Existing Spool",tabNew:"New Spool",tabReplace:"Replace Tag",searchPlaceholder:"Search by material, color, brand...",noUntaggedSpools:"No spools without tags",noTaggedSpools:"No spools with tags",selectSpool:"Select a spool, then place a blank NTAG on the reader",placeTag:"Place an NTAG on the reader",tagReady:"Tag detected — ready to write",writeTag:"Write Tag",replaceTag:"Replace Tag",writing:"Writing tag...",waiting:"Waiting for SpoolBuddy...",writeSuccess:"Tag written successfully!",writeFailed:"Write failed",queueFailed:"Failed to queue write command",tryAgain:"Try Again",cancel:"Cancel",replaceWarning:"Old tag will be unlinked. New tag will replace it.",deviceOffline:"SpoolBuddy is offline",material:"Material",colorName:"Color Name",color:"Color",brand:"Brand",weight:"Weight (g)",createSpool:"Create Spool",creating:"Creating...",spoolCreated:"Spool created! Ready to write.",createFailed:"Failed to create spool"},quickMenu:{printerPower:"Printer Power",systemControls:"System",restartDaemon:"Restart Daemon",restartBrowser:"Restart Browser",reboot:"Reboot",shutdown:"Shutdown",swipeToClose:"Swipe down to close",confirmTitle:"Confirm",confirmShutdown:"Are you sure you want to shut down the SpoolBuddy? You will need physical access to turn it back on.",confirmReboot:"Are you sure you want to reboot the SpoolBuddy?",confirmRestartDaemon:"Restart the SpoolBuddy daemon? NFC and scale will be temporarily unavailable.",confirmRestartBrowser:"Restart the kiosk browser? The display will briefly go blank.",confirm:"Confirm",confirmPlugOn:"Turn on {{name}}?",confirmPlugOff:"Turn off {{name}}?",turnOn:"Turn On",turnOff:"Turn Off"}},bugReport:{title:"Report a Bug",description:"Description",descriptionPlaceholder:"What went wrong? Please describe the issue...",email:"Email (optional)",emailPlaceholder:"your@email.com",emailPrivacy:"If provided, your email will be included in a collapsed section of the GitHub issue so the maintainer can follow up.",screenshot:"Screenshot",uploadOrPaste:"Upload, paste, or drag an image",dataCollectedSummary:"What data is included in the report?",dataIncluded:"Included:",dataIncludedList:"App version, OS, architecture, Python version, database stats (counts only), printer models, nozzle counts, firmware versions, connectivity status, integration status (Spoolman, MQTT, HA), non-sensitive settings, network interface count, Docker details, dependency versions.",dataNeverIncluded:"Never included:",dataNeverIncludedList:"Printer names, serial numbers, access codes, passwords, IP addresses, email addresses, API keys, tokens, webhook URLs, hostnames, or usernames.",submit:"Submit",startLogging:"Start Debug Logging",stepEnableLogging:"Debug logging enabled",stepReproduce:"Reproduce the issue now",stepStopLogging:"Stop & submit report",stopAndSubmit:"Stop & Submit",maxDuration:"Auto-stops after {{minutes}} min",stoppingLogs:"Collecting logs & submitting...",submitting:"Submitting bug report...",submitSuccess:"Bug report submitted successfully!",submitFailed:"Failed to submit bug report",thankYou:"Thank you!",submitted:"Your bug report has been submitted.",viewIssue:"View Issue",unexpectedError:"An unexpected error occurred"},failureDetection:{title:"AI Failure Detection",description:"Monitor prints with a self-hosted Obico ML API and act on detected failures automatically.",mlUrl:"Obico ML API URL",mlUrlHint:"Base URL of your self-hosted Obico ml_api container (e.g. http://192.168.1.10:3333).",test:"Test",testSuccess:"ML API reachable and healthy.",testFailed:"Could not reach the ML API.",sensitivity:"Sensitivity",sensitivityLow:"Low (fewer false positives)",sensitivityMedium:"Medium (balanced)",sensitivityHigh:"High (detect early, more false positives)",sensitivityHint:"Adjusts the confidence thresholds that trigger warnings and failures.",action:"Action on detected failure",actionNotify:"Notify only",actionPause:"Pause print",actionPauseOff:"Pause and cut power",pollInterval:"Poll interval (seconds)",pollIntervalHint:"How often to check each printer while it is printing. Minimum 5s, maximum 120s.",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"Monitored Printers",perPrinterHint:"Choose which printers the detection service watches.",monitorAll:"Monitor all connected printers",statusTitle:"Status",serviceRunning:"Service running",thresholds:"Low / High thresholds",activePrinters:"Active prints",noActivePrints:"No prints currently running.",historyTitle:"Recent Detections",noHistory:"No detections yet."}},$ue={nav:{printers:"Drucker",archives:"Archiv",queue:"Warteschlange",stats:"Statistiken",profiles:"Profile",maintenance:"Wartung",projects:"Projekte",inventory:"Filament",files:"Dateimanager",notifications:"Benachrichtigungen",settings:"Einstellungen",system:"System",collapseSidebar:"Seitenleiste einklappen",expandSidebar:"Seitenleiste ausklappen",update:"Update",updateAvailable:"Update verfügbar: v{{version}}",updateAvailableBanner:"Version {{version}} ist verfügbar!",viewUpdate:"Update anzeigen",viewOnGithub:"Auf GitHub ansehen",keyboardShortcuts:"Tastaturkürzel (?)",switchToLight:"Zum hellen Modus wechseln",switchToDark:"Zum dunklen Modus wechseln",smartSwitches:"Smart Switches",logout:"Abmelden"},common:{save:"Speichern",saving:"Speichern...",cancel:"Abbrechen",delete:"Löschen",edit:"Bearbeiten",add:"Hinzufügen",close:"Schließen",confirm:"Bestätigen",loading:"Lädt...",error:"Fehler",success:"Erfolg",warning:"Warnung",enabled:"Aktiviert",disabled:"Deaktiviert",yes:"Ja",no:"Nein",on:"An",off:"Aus",all:"Alle",none:"Keine",search:"Suchen",filter:"Filtern",sort:"Sortieren",refresh:"Aktualisieren",download:"Herunterladen",upload:"Hochladen",uploading:"Hochladen...",uploadFailed:"Hochladen fehlgeschlagen",actions:"Aktionen",status:"Status",name:"Name",description:"Beschreibung",date:"Datum",time:"Zeit",hours:"Stunden",minutes:"Minuten",seconds:"Sekunden",days:"Tage",enable:"Aktivieren",disable:"Deaktivieren",permissions:"Berechtigungen",noPrinters:"Keine Drucker konfiguriert",noData:"Keine Daten verfügbar",linkNotFound:"Link nicht gefunden",required:"Erforderlich",optional:"Optional",dismiss:"Schließen",apply:"Anwenden",reset:"Zurücksetzen",export:"Exportieren",import:"Importieren",clear:"Leeren",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",noChange:"— Keine Änderung —",unchanged:"Unverändert",unassigned:"Nicht zugewiesen",unknown:"Unbekannt",unknownError:"Unbekannter Fehler",today:"Heute",tomorrow:"Morgen",asap:"Sofort",overdue:"Überfällig",now:"Jetzt",collapse:"Einklappen",expand:"Ausklappen",viewArchive:"Archiv anzeigen",viewInFileManager:"Im Dateimanager anzeigen",addedBy:"Hinzugefügt von {{username}}",prints:"Drucke",more:"+{{count}} weitere",ascending:"Aufsteigend",descending:"Absteigend",back:"Zurück",copy:"Kopieren",copied:"Kopiert!",printer:"Drucker",remove:"Entfernen",type:"Typ",print:"Drucken",rename:"Umbenennen",move:"Verschieben",create:"Erstellen",duplicate:"Duplizieren",left:"Links",right:"Rechts"},printers:{title:"Drucker",addPrinter:"Drucker hinzufügen",editPrinter:"Drucker bearbeiten",deletePrinter:"Drucker löschen",printerName:"Druckername",serialNumber:"Seriennummer",ipAddress:"IP-Adresse / Hostname",accessCode:"Zugangscode",model:"Modell",nozzleCount:"Düsenanzahl",autoArchive:"Automatische Archivierung",status:{available:"Verfügbar",idle:"Bereit",printing:"Druckt",paused:"Pausiert",offline:"Offline",problem:"Problem",error:"Fehler",finished:"Fertig",unknown:"Unbekannt"},temperatures:{nozzle:"Düse",bed:"Druckbett",chamber:"Kammer"},progress:"{{percent}}% abgeschlossen",timeRemaining:"Noch {{time}}",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',maintenanceOk:"Wartung OK",maintenanceWarning:"{{count}} Warnung",maintenanceWarning_plural:"{{count}} Warnungen",maintenanceDue:"{{count}} fällig",maintenanceDue_plural:"{{count}} fällig",sort:{name:"Name",status:"Status",model:"Modell",location:"Standort",ascending:"Aufsteigend sortieren",descending:"Absteigend sortieren"},cardSize:{small:"Kleine Karten",medium:"Mittlere Karten",large:"Große Karten",extraLarge:"Extra große Karten"},hideOffline:"Offline ausblenden",nextAvailable:"Nächster verfügbar",powerOn:"Einschalten",offlinePrintersWithPlugs:"Offline-Drucker mit Smart-Plugs",noPrintersConfigured:"Noch keine Drucker konfiguriert",search:"Drucker suchen...",noSearchResults:"Keine Drucker entsprechen deiner Suche oder deinen Filtern",filter:{allStatuses:"Alle Status",allLocations:"Alle Standorte"},readyToPrint:"Druckbereit",external:"Extern",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Druckarchive löschen",noLabel:"Keine Bezeichnung",printPreview:"Druckvorschau",width:"Breite",height:"Höhe",noObjectsFound:"Keine Objekte gefunden",objectsLoadedOnPrintStart:"Objekte werden beim Druckstart geladen",willBeSkipped:"Wird übersprungen",name:"Name",serialCannotBeChanged:"Seriennummer kann nicht geändert werden",locationHelp:"Dient zur Gruppierung von Druckern und zum Filtern von Warteschlangenaufträgen",wifiSignal:{veryWeak:"Sehr schwach",weak:"Schwach",fair:"Ausreichend",good:"Gut",excellent:"Ausgezeichnet"},maintenanceUpToDate:"Alle Wartungen aktuell - Klicken zum Anzeigen",chamberLightOn:"Kammerbeleuchtung einschalten",chamberLightOff:"Kammerbeleuchtung ausschalten",files:"Dateien",browseFiles:"Druckerdateien durchsuchen",autoOffAfterPrint:"Automatisches Ausschalten nach Druck",autoOffExecuted:"Auto-off wurde ausgeführt - Drucker einschalten zum Zurücksetzen",hmsErrors:"HMS-Fehler",viewHmsErrors:"{{count}} HMS-Fehler anzeigen",resume:"Fortsetzen",pause:"Pausieren",stop:"Stoppen",camera:"Kamera",skipObject:"Objekt überspringen",reconnect:"Neu verbinden",forceRefresh:"Aktualisierung erzwingen",forceRefreshSuccess:"Aktualisierung angefordert",mqttDebug:"MQTT-Debug",printerInformation:"Druckerinformationen",copyToClipboard:"Kopieren",copied:"Kopiert!",state:"Zustand",wifiSignalLabel:"WLAN-Signal",developerMode:"Entwicklermodus",enabled:"Aktiviert",disabled:"Deaktiviert",addedOn:"Hinzugefügt",sdCard:"SD-Karte",inserted:"Eingelegt",notInserted:"Nicht eingelegt",totalPrintHours:"Druckstunden",activeNozzle:"Aktiv: {{nozzle}} Düse",nozzleRack:"Düsenhalter",nozzleDocked:"Angedockt",nozzleMounted:"Montiert",nozzleActive:"Aktiv",nozzleIdle:"Inaktiv",nozzleDiameter:"Durchmesser",nozzleType:"Typ",nozzleStatus:"Status",nozzleFilament:"Filament",nozzleWear:"Verschleiß",nozzleMaxTemp:"Max Temp",nozzleSerial:"Seriennr.",nozzleHardenedSteel:"Gehärteter Stahl",nozzleStainlessSteel:"Edelstahl",nozzleTungstenCarbide:"Wolframkarbid",nozzleFlow:"Durchfluss",nozzleHighFlow:"High Flow",nozzleStandardFlow:"Standard",firmwareUpdate:"Firmware-Update",firmwareInstructions:"Gehen Sie auf dem Touchscreen des Druckers zu",firmwareNav:"Navigieren Sie zu",settings:"Einstellungen",firmware:"Firmware",discoverPrinters:"Drucker entdecken",searching:"Suche...",manualEntry:"Manuelle Eingabe",addFromCloud:"Aus Cloud hinzufügen",toast:{printerDeleted:"Drucker gelöscht",missingSpoolAssignment:"Druck gestartet auf {{printer}}. Fehlende Spulenzuordnung für: {{slots}}",printerAdded:"Drucker hinzugefügt",printerUpdated:"Drucker aktualisiert",failedToDelete:"Drucker konnte nicht gelöscht werden",failedToAdd:"Drucker konnte nicht hinzugefügt werden",failedToUpdate:"Drucker konnte nicht aktualisiert werden",commandSent:"Befehl gesendet",failedToSendCommand:"Befehl konnte nicht gesendet werden",turnedOn:"{{name}} eingeschaltet",failedToPowerOn:"{{name}} konnte nicht eingeschaltet werden",scriptTriggered:"Skript ausgelöst",printStopped:"Druck gestoppt",printPaused:"Druck pausiert",printResumed:"Druck fortgesetzt",referenceDeleted:"Referenz gelöscht",detectionAreaSaved:"Erkennungsbereich gespeichert",failedToRunScript:"Skript konnte nicht ausgeführt werden",failedToStopPrint:"Druck konnte nicht gestoppt werden",failedToPausePrint:"Druck konnte nicht pausiert werden",failedToResumePrint:"Druck konnte nicht fortgesetzt werden",failedToControlChamberLight:"Kammerbeleuchtung konnte nicht gesteuert werden",failedToSetSpeed:"Druckgeschwindigkeit konnte nicht eingestellt werden",failedToUpdateSetting:"Einstellung konnte nicht aktualisiert werden",failedToSkipObjects:"Objekte konnten nicht übersprungen werden",failedToRereadRfid:"RFID konnte nicht erneut gelesen werden",failedToCheckPlate:"Platte konnte nicht überprüft werden",failedToUpdateLabel:"Bezeichnung konnte nicht aktualisiert werden",failedToDeleteReference:"Referenz konnte nicht gelöscht werden",failedToSaveDetectionArea:"Erkennungsbereich konnte nicht gespeichert werden",plateCheckEnabled:"Plattenprüfung aktiviert",plateCheckDisabled:"Plattenprüfung deaktiviert",calibrationSaved:"Kalibrierung gespeichert!",calibrationFailed:"Kalibrierung fehlgeschlagen",rfidRereadInitiated:"RFID-Neueinlesen gestartet"},connection:{connected:"Verbunden",offline:"Offline"},queue:{inQueue:"{{count}} Druck in Warteschlange",inQueue_plural:"{{count}} Drucke in Warteschlange"},controls:"Steuerung",rfid:{reread:"RFID neu lesen"},bedJog:{title:"Druckbett bewegen",bed:"Bett",step:"Schritt (mm)",up:"Platte hoch",down:"Platte runter",disabledWhilePrinting:"Während des Drucks deaktiviert",notHomedTitle:"Drucker ist nicht referenziert",notHomedMessage:"Die Z-Achse wurde seit dem letzten Druck nicht referenziert. Referenzieren Sie Z zuerst für eine sichere Positionierung oder bewegen Sie trotzdem — die Software-Endschalter werden dabei umgangen.",homeZ:"Z referenzieren",moveAnyway:"Trotzdem bewegen",homingStarted:"Z-Achse wird referenziert…"},permission:{noAdd:"Sie haben keine Berechtigung, Drucker hinzuzufügen",noEdit:"Sie haben keine Berechtigung, Drucker zu bearbeiten",noDelete:"Sie haben keine Berechtigung, Drucker zu löschen",noControl:"Sie haben keine Berechtigung, Drucker zu steuern",noFiles:"Sie haben keine Berechtigung, auf Druckerdateien zuzugreifen",noAmsRfid:"Sie haben keine Berechtigung, AMS-RFID erneut zu lesen",noSmartPlugControl:"Sie haben keine Berechtigung, Smart Plugs zu steuern",noCamera:"Sie haben keine Berechtigung, Kameras anzuzeigen"},modal:{addTitle:"Drucker hinzufügen",editTitle:"Drucker bearbeiten",myPrinter:"Mein Drucker",selectModel:"Modell auswählen...",locationGroup:"Standort / Gruppe (optional)",locationPlaceholder:"z.B. Werkstatt, Büro, Keller",autoArchiveLabel:"Abgeschlossene Drucke automatisch archivieren",fromPrinterSettings:"Aus Druckereinstellungen",modelOptional:"Modell (optional)",saveChanges:"Änderungen speichern"},skipObjects:{tooltip:"Objekte überspringen",onlyWhilePrinting:"Objekte überspringen (nur während des Drucks)",requiresMultiple:"Objekte überspringen (erfordert 2+ Objekte)",title:"Objekte überspringen",matchIdsInfo:"IDs mit Drucker-Display abgleichen",printerShowsIds:"Der Druckerbildschirm zeigt Objekt-IDs auf der Bauplatte",skipSelected:"Ausgewählte überspringen",skipping:"Überspringe...",noObjectsSelected:"Keine Objekte ausgewählt",selectObjectsToSkip:"Wählen Sie Objekte aus, die Sie vom aktuellen Druck überspringen möchten",skipped:"übersprungen",objectsSkipped:"Objekte übersprungen",activeCount:"{{count}} aktiv",waitForLayer:"Warten Sie auf Schicht 2+ zum Überspringen von Objekten (aktuell Schicht {{layer}})",skip:"Überspringen",confirmTitle:"Objekt überspringen?",confirmMessage:'Möchten Sie "{{name}}" wirklich überspringen? Dies kann nicht rückgängig gemacht werden.'},confirm:{deleteTitle:"Drucker löschen",deleteMessage:'Möchten Sie "{{name}}" wirklich löschen? Alle Verbindungseinstellungen werden entfernt.',deleteArchivesNote:"Der gesamte Druckverlauf für diesen Drucker wird dauerhaft gelöscht.",keepArchivesNote:"Der Druckverlauf wird beibehalten, aber nicht mehr mit diesem Drucker verknüpft.",stopTitle:"Druck stoppen",stopMessage:'Möchten Sie den aktuellen Druck auf "{{name}}" wirklich stoppen? Der Druckauftrag wird abgebrochen.',stopButton:"Druck stoppen",pauseTitle:"Druck pausieren",pauseMessage:'Möchten Sie den aktuellen Druck auf "{{name}}" wirklich pausieren?',pauseButton:"Druck pausieren",resumeTitle:"Druck fortsetzen",resumeMessage:'Möchten Sie den Druck auf "{{name}}" fortsetzen?',resumeButton:"Druck fortsetzen",powerOnTitle:"Drucker einschalten",powerOnMessage:'Möchten Sie die Stromversorgung für "{{name}}" wirklich EINSCHALTEN?',powerOnButton:"Einschalten",powerOffTitle:"Drucker ausschalten",powerOffMessage:'Möchten Sie die Stromversorgung für "{{name}}" wirklich AUSSCHALTEN?',powerOffWarning:'WARNUNG: "{{name}}" druckt gerade! Möchten Sie die Stromversorgung wirklich AUSSCHALTEN? Dies unterbricht den Druck und kann den Drucker beschädigen.',powerOffButton:"Ausschalten"},bulk:{select:"Auswählen",selectAll:"Alle auswählen",selectByLocation:"Nach Standort auswählen",selected:"{{count}} ausgewählt",actions:{stop:"Stoppen",pause:"Pausieren",resume:"Fortsetzen",clearPlate:"Druckbett leeren",clearHMS:"Benachrichtigungen löschen"},confirm:{stopTitle:"{{count}} Drucke stoppen",stopMessage:"Dies wird aktive Drucke auf {{count}} Drucker(n) abbrechen. Diese Aktion kann nicht rückgängig gemacht werden.",stopButton:"Alle stoppen",pauseTitle:"{{count}} Drucke pausieren",pauseMessage:"Dies wird aktive Drucke auf {{count}} Drucker(n) pausieren.",pauseButton:"Alle pausieren",clearPlateTitle:"{{count}} Druckbetten leeren",clearPlateMessage:"Dies wird das Druckbett auf {{count}} Drucker(n) leeren und kann wartende Aufträge starten.",clearPlateButton:"Alle leeren"},success:"{{action}} auf {{count}} Drucker(n) abgeschlossen",partial:"{{succeeded}} erfolgreich, {{failed}} fehlgeschlagen",noneApplicable:"Keine ausgewählten Drucker sind im richtigen Zustand für diese Aktion",selectByState:"Nach Status auswählen"},discovery:{title:"Drucker entdecken",searching:"Suche...",scanning:"Scanne...",scanProgress:"Scanne... {{scanned}}/{{total}}",foundPrinters:"{{count}} Drucker gefunden",noPrintersFound:"Keine Drucker gefunden",noPrintersFoundSubnet:"Keine Drucker im angegebenen Subnetz gefunden.",noPrintersFoundNetwork:"Keine Drucker im Netzwerk gefunden.",allConfigured:"Alle erkannten Drucker sind bereits konfiguriert.",alreadyAdded:"Bereits hinzugefügt",select:"Auswählen",manualEntry:"Manuelle Eingabe",addFromCloud:"Aus Cloud hinzufügen",subnetToScan:"Zu scannendes Subnetz",dockerNote:"Docker erkannt. Geben Sie das Subnetz Ihres Druckers in CIDR-Notation ein. Erfordert network_mode: host in docker-compose.yml.",scanSubnet:"Subnetz nach Druckern scannen",discoverNetwork:"Drucker im Netzwerk suchen",scanningSubnet:"Subnetz wird nach Bambu-Druckern gescannt...",scanningNetwork:"Netzwerk wird gescannt...",serialRequired:"Seriennummer erforderlich",unknown:"Unbekannt",failedToStart:"Erkennung konnte nicht gestartet werden"},drying:{start:"Trocknung starten",stop:"Trocknung stoppen",temperature:"Temperatur",duration:"Dauer",hours:"Stunden",timeRemaining:"{{time}} verbleibend",active:"Trocknung",notSupported:"Trocknung nicht unterstützt",powerRequired:"AMS-Netzteil anschließen, um Trocknung zu aktivieren",startingDrying:"Trocknung wird gestartet...",stoppingDrying:"Trocknung wird gestoppt...",rotateTray:"Spule während der Trocknung drehen"},filaments:"Filamente",openCameraOverlay:"Kamera-Overlay öffnen",openCameraWindow:"Kamera in neuem Fenster öffnen",firmwareUpdateAvailable:"Firmware-Update verfügbar: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Aktuell",firmwareUpdateButton:"Update",plateDetection:{noPermission:"Sie haben keine Berechtigung, Drucker zu aktualisieren",enabledClick:"Plattenprüfung aktiviert - Klicken zum Deaktivieren",disabledClick:"Plattenprüfung deaktiviert - Klicken zum Aktivieren",manageCalibration:"Platten-Erkennungskalibrierung verwalten",calibrationRequired:"Kalibrierung erforderlich",calibrationInstructions:"Bitte stellen Sie sicher, dass die Druckplatte vollständig leer ist, und klicken Sie dann auf Kalibrieren.",calibrationDescription:"Die Kalibrierung erfasst ein Referenzbild der leeren Platte. Zukünftige Prüfungen vergleichen mit dieser Referenz, um Objekte zu erkennen.",calibrationTip:"Tipp: Sie können bis zu 5 Kalibrierungen für verschiedene Platten speichern. Das System verwendet automatisch die beste Übereinstimmung bei der Prüfung.",plateEmpty:"Platte erscheint leer",objectsDetected:"Objekte auf Platte erkannt",confidence:"Konfidenz",difference:"Differenz",analysisPreview:"Analysevorschau:",analysisLegend:"Grüner Rahmen = Erkennungsbereich, Rote Überlagerung = Unterschiede zur Kalibrierung",savedReferences:"Gespeicherte Referenzen ({{count}}/{{max}})",deleteReference:"Referenz löschen",labelPlaceholder:"Bezeichnung...",clickToEdit:"{{label}} - Zum Bearbeiten klicken",clickToAddLabel:"Zum Hinzufügen einer Bezeichnung klicken"},speed:{title:"Druckgeschwindigkeit",silent:"Leise (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Luftkanal-Modus",cooling:"Kühlen",heating:"Heizen"},noSdCard:"Keine SD",door:{open:"Offen",closed:"Zu"},fans:{partCooling:"Bauteilkühlung",auxiliary:"Hilfsventilator",chamber:"Kammerventilator"},clickToViewHmsErrors:"Klicken, um HMS-Fehler anzuzeigen",estimatedCompletion:"Geschätzte Fertigstellungszeit",plateNumber:"Platte {{number}}",slotOptions:"Slot-Optionen",amsPopup:{friendlyName:"AMS-Name",friendlyNamePlaceholder:"z. B. AMS-Anzeigename",serialNumber:"Seriennummer",firmwareVersion:"Firmware",save:"Speichern",clear:"Löschen",noEditPermission:"Sie haben keine Berechtigung, AMS-Einheiten umzubenennen"},firmwareModal:{title:"Firmware-Update",titleUpToDate:"Firmware-Info",currentVersion:"Aktuell:",latestVersion:"Neueste:",releaseNotes:"Versionshinweise",checkingPrereqs:"Prüfe Voraussetzungen...",sdCardReady:"SD-Karte bereit. Klicken Sie unten, um die Firmware hochzuladen.",uploadedSuccess:"Firmware auf SD-Karte hochgeladen!",applyInstructions:"So wenden Sie das Update auf Ihrem Drucker an:",step1:"Gehen Sie auf dem Touchscreen des Druckers zu Einstellungen",step2:"Navigieren Sie zu Firmware",step3:"Wählen Sie Update von SD-Karte",step4:"Das Update dauert 10-20 Minuten",done:"Fertig",starting:"Starte...",uploadFirmware:"Firmware hochladen",uploadFailed:"Upload fehlgeschlagen: {{error}}",uploadedToast:"Firmware hochgeladen! Starten Sie das Update vom Druckerbildschirm.",availableVersions:"Verfügbare Versionen",usable:"Installierbar",unavailable:"Nicht verfügbar",installed:"Installiert",newerBadge:"neuer",olderBadge:"älter",currentBadge:"aktuell"},accessCodePlaceholder:"Leer lassen, um den aktuellen zu behalten",roi:{title:"Erkennungsbereich (ROI)",xStart:"X-Start",yStart:"Y-Start",width:"Breite",height:"Höhe",instruction:"Passen Sie den Erkennungsbereich an, um sich auf die Druckplatte zu konzentrieren. Der grüne Rahmen in der Vorschau zeigt den aktuellen Bereich."},developerModeWarning:"Der Entwickler-LAN-Modus ist nicht aktiviert auf: {{names}}. Einige Funktionen funktionieren möglicherweise nicht.",howToEnable:"Aktivieren",incompatibleFile:"Diese Datei wurde für {{slicedFor}} geslicet, aber dieser Drucker ist ein {{printerModel}}",dropNotPrintable:"Nur .gcode- und .gcode.3mf-Dateien können gedruckt werden",dropToPrint:"Zum Drucken ablegen",cannotPrint:"Drucker beschäftigt"},archives:{title:"Druckarchiv",searchPlaceholder:"Archiv durchsuchen...",filterByPrinter:"Nach Drucker filtern",filterByStatus:"Nach Status filtern",sortBy:"Sortieren nach",sortNewest:"Neueste zuerst",sortOldest:"Älteste zuerst",sortName:"Name",sortDuration:"Dauer",sortLargest:"Größte zuerst",sortSmallest:"Kleinste zuerst",sortSize:"Größe",noArchives:"Keine Archive gefunden",noArchivesSearch:"Keine Archive entsprechen Ihrer Suche",originalPrintNotVisible:"Ursprünglicher Druck nicht sichtbar - versuchen Sie, die Filter zu löschen",noArchivesYet:"Noch keine Archive",prints:"Drucke",pagination:{showing:"Zeige",to:"bis",of:"von",show:"Zeige",page:"Seite",all:"Alle"},loadingArchives:"Lade Archive...",releaseToUpload:"Loslassen zum Hochladen",showAll:"Alle anzeigen",showFavoritesOnly:"Nur Favoriten anzeigen",gridView:"Rasteransicht",listView:"Listenansicht",calendarView:"Kalenderansicht",logView:"Druckprotokoll",manageTags:"Tags verwalten",showFailedPrints:"Fehlgeschlagene Drucke anzeigen",hideFailedPrints:"Fehlgeschlagene Drucke ausblenden",hideDuplicates:"Duplikate ausblenden",viewOriginalPrint:"Klicken, um den ursprünglichen Druck anzuzeigen (#{{id}})",printTime:"Druckzeit",filamentUsed:"Verbrauchtes Filament",cost:"Kosten",reprint:"Drucken",preview:"Vorschau",deleteArchive:"Archiv löschen",deleteConfirm:"Möchten Sie dieses Archiv wirklich löschen?",favorite:"Favorit",unfavorite:"Aus Favoriten entfernen",viewDetails:"Details anzeigen",status:{completed:"Abgeschlossen",failed:"Fehlgeschlagen",stopped:"Gestoppt"},toast:{source3mfAttached:"Quell-3MF angehängt: {{filename}}",failedUploadSource3mf:"Fehler beim Hochladen der Quell-3MF",source3mfRemoved:"Quell-3MF entfernt",failedRemoveSource3mf:"Fehler beim Entfernen der Quell-3MF",f3dAttached:"F3D angehängt: {{filename}}",failedUploadF3d:"Fehler beim Hochladen der F3D",f3dRemoved:"F3D entfernt",failedRemoveF3d:"Fehler beim Entfernen der F3D",timelapseAttached:"Zeitraffer angehängt: {{filename}}",timelapseAlreadyAttached:"Zeitraffer bereits angehängt",noMatchingTimelapse:"Kein passender Zeitraffer gefunden",failedScanTimelapse:"Fehler beim Suchen nach Zeitraffer",failedAttachTimelapse:"Fehler beim Anhängen des Zeitraffers",timelapseRemoved:"Zeitraffer entfernt",failedRemoveTimelapse:"Fehler beim Entfernen des Zeitraffers",timelapseUploaded:"Zeitraffer hochgeladen: {{filename}}",failedUploadTimelapse:"Fehler beim Hochladen des Zeitraffers",archiveDeleted:"Archiv gelöscht",failedDeleteArchive:"Fehler beim Löschen des Archivs",addedToFavorites:"Zu Favoriten hinzugefügt",removedFromFavorites:"Aus Favoriten entfernt",projectUpdated:"Projekt aktualisiert",failedUpdateProject:"Fehler beim Aktualisieren des Projekts",linkCopied:"Link in die Zwischenablage kopiert",failedCopyLink:"Fehler beim Kopieren des Links",photoDeleted:"Foto gelöscht",failedDeletePhoto:"Fehler beim Löschen des Fotos",failedDeleteArchives:"Fehler beim Löschen der Archive",failedUpdateFavorites:"Fehler beim Aktualisieren der Favoriten",exportDownloaded:"Export heruntergeladen",exportFailed:"Export fehlgeschlagen"},menu:{print:"Drucken",schedule:"Planen",openInBambuStudio:"Im Slicer öffnen",slice:"Slicen",externalLink:"Externer Link",viewOnMakerWorld:"Auf MakerWorld ansehen",preview3d:"3D-Vorschau",viewTimelapse:"Zeitraffer ansehen",scanForTimelapse:"Nach Zeitraffer suchen",uploadTimelapse:"Zeitraffer hochladen",removeTimelapse:"Zeitraffer entfernen",downloadSource3mf:"Quell-3MF herunterladen",uploadSource3mf:"Quell-3MF hochladen",replaceSource3mf:"Quell-3MF ersetzen",removeSource3mf:"Quell-3MF entfernen",uploadF3d:"F3D hochladen",replaceF3d:"F3D ersetzen",downloadF3d:"F3D herunterladen",removeF3d:"F3D entfernen",download:"Herunterladen",copyDownloadLink:"Download-Link kopieren",qrCode:"QR-Code",viewPhotos:"Fotos ansehen",viewPhotosCount:"Fotos ansehen ({{count}})",projectPage:"Projektseite",addToFavorites:"Zu Favoriten hinzufügen",removeFromFavorites:"Aus Favoriten entfernen",edit:"Bearbeiten",goToProject:"Zum Projekt: {{name}}",addToProject:"Zu Projekt hinzufügen",removeFromProject:"Aus Projekt entfernen",loading:"Laden...",noProjectsAvailable:"Keine Projekte verfügbar",select:"Auswählen",deselect:"Abwählen",delete:"Löschen"},permission:{noReprint:"Sie haben keine Berechtigung, dieses Archiv erneut zu drucken",noAddToQueue:"Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen",noUpdateArchives:"Sie haben keine Berechtigung, Archive zu aktualisieren",noUploadFiles:"Sie haben keine Berechtigung, Dateien hochzuladen",noDownload:"Sie haben keine Berechtigung, Archive herunterzuladen",noCopyLink:"Sie haben keine Berechtigung, Download-Links zu kopieren",noDelete:"Sie haben keine Berechtigung, dieses Archiv zu löschen",noCreate:"Sie haben keine Berechtigung, Archive zu erstellen"},card:{previousPlate:"Vorherige Platte",nextPlate:"Nächste Platte",plateNumber:"Platte {{index}}",moreOptions:"Rechtsklick für mehr Optionen",addToFavorites:"Zu Favoriten hinzufügen",removeFromFavorites:"Aus Favoriten entfernen",cancelled:"abgebrochen",failed:"fehlgeschlagen",duplicate:"Duplikat",duplicateTitle:"Dieses Modell wurde bereits zuvor gedruckt",openSource3mf:"Quell-3MF in Bambu Studio öffnen (Rechtsklick für mehr Optionen)",downloadF3d:"Fusion 360 Designdatei herunterladen",viewTimelapse:"Zeitraffer ansehen",viewPhoto:"1 Foto ansehen",viewPhotos:"{{count}} Fotos ansehen",openFolder:"Ordner öffnen: {{name}}",slicedFile:"Geslicte Datei - druckbereit",sourceFile:"Nur Quelldatei - keine AMS-Zuordnung verfügbar",gcode:"GCODE",source:"QUELLE",project:"Projekt: {{name}}",estimated:"Geschätzt: {{time}}",actual:"Tatsächlich: {{time}}",accuracy:"Genauigkeit: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} Schicht",layers:"{{count}} Schichten",object:"{{count}} Objekt",objects:"{{count}} Objekte",slicedFor:"Geslict für {{model}}",uploadedBy:"Hochgeladen von",noPermissionReprint:"Sie haben keine Berechtigung, erneut zu drucken",noFileForReprint:"Keine 3MF-Datei verfügbar — die Datei konnte beim Aufzeichnen des Drucks nicht vom Drucker heruntergeladen werden",noPermissionEdit:"Sie haben keine Berechtigung, Archive zu bearbeiten",noPermissionDelete:"Sie haben keine Berechtigung, Archive zu löschen",reprint:"Drucken",schedulePrint:"Druck planen",schedule:"Planen",openInBambuStudio:"Im Slicer öffnen",openInBambuStudioToSlice:"Im Slicer öffnen zum Slicen",slice:"Slicen",externalLink:"Externer Link",makerWorld:"MakerWorld: {{designer}}",viewProject:"Projekt ansehen",noExternalLink:"Kein externer Link",preview3d:"3D-Vorschau",download:"Herunterladen",edit:"Bearbeiten",delete:"Löschen"},modal:{deleteArchive:"Archiv löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.',deleteButton:"Löschen",removeSource3mf:"Quell-3MF entfernen",removeSource3mfConfirm:'Möchten Sie die Quell-3MF-Datei wirklich von "{{name}}" entfernen? Die ursprüngliche Slicer-Projektdatei wird gelöscht.',removeButton:"Entfernen",removeF3d:"F3D entfernen",removeF3dConfirm:'Möchten Sie die Fusion 360 Designdatei wirklich von "{{name}}" entfernen?',removeTimelapse:"Zeitraffer entfernen",removeTimelapseConfirm:'Möchten Sie das Zeitraffervideo wirklich von "{{name}}" entfernen?',timelapse:"{{name}} - Zeitraffer",selectTimelapse:"Zeitraffer auswählen",selectTimelapseDesc:"Keine automatische Übereinstimmung gefunden. Wählen Sie den Zeitraffer für diesen Druck:",deleteArchives:"Archive löschen",deleteArchivesConfirm:"Möchten Sie wirklich {{count}} Archiv(e) löschen? Diese Aktion kann nicht rückgängig gemacht werden.",deleteCount:"{{count}} löschen"},page:{title:"Archive",printsCount:"{{filtered}} von {{total}} Drucken",dropFilesHere:".3mf-Dateien hier ablegen",releaseToUpload:"Loslassen zum Hochladen",only3mfSupported:"Nur .3mf-Dateien werden unterstützt",close:"Schließen",selected:"{{count}} ausgewählt",selectAll:"Alle auswählen",tags:"Tags",project:"Projekt",favorite:"Favorit",delete:"Löschen",toggledFavorites:"Favoriten für {{count}} Archiv(e) umgeschaltet",failedUpdateFavorites:"Fehler beim Aktualisieren der Favoriten",archivesDeleted:"{{count}} Archiv(e) gelöscht",failedDeleteArchives:"Fehler beim Löschen der Archive",photoDeleted:"Foto gelöscht",failedDeletePhoto:"Fehler beim Löschen des Fotos"},list:{name:"Name",printer:"Drucker",date:"Datum",size:"Größe",actions:"Aktionen",hasTimelapse:"Hat Zeitraffer"},log:{date:"Datum",printName:"Druckname",printer:"Drucker",user:"Benutzer",status:"Status",duration:"Dauer",filament:"Filament",allPrinters:"Alle Drucker",allUsers:"Alle Benutzer",allStatuses:"Alle Status",cancelled:"Abgebrochen",skipped:"Übersprungen",dateFrom:"Von",dateTo:"Bis",noEntries:"Keine Druckprotokolleinträge gefunden",showing:"{{count}} von {{total}} Einträgen",rowsPerPage:"Zeilen",page:"Seite",prev:"Zurück",next:"Weiter",clearLog:"Protokoll löschen",clearLogTitle:"Druckprotokoll löschen",clearLogConfirm:"Alle Druckprotokolleinträge werden dauerhaft gelöscht. Archive und Warteschlangeneinträge sind nicht betroffen. Diese Aktion kann nicht rückgängig gemacht werden. Sind Sie sicher?",clearLogButton:"Alle löschen",cleared:"{{count}} Protokolleinträge gelöscht",clearFailed:"Druckprotokoll konnte nicht gelöscht werden"}},queue:{title:"Druckwarteschlange",subtitle:"Planen und verwalten Sie Ihre Druckaufträge",addToQueue:"Zur Warteschlange hinzufügen",print:"Drucken",reprint:"Erneut drucken",schedulePrint:"Druck planen",editQueueItem:"Warteschlangeneintrag bearbeiten",printToPrinters:"Auf {{count}} Druckern drucken",queueToPrinters:"Zu {{count}} Druckern hinzufügen",queueSelectedPlates:"{{count}} Platten in die Warteschlange",selectAllPlates:"Alle {{count}} Platten auswählen",deselectAll:"Alle abwählen",printQueued:"Druck in Warteschlange",itemsQueued:"{{count}} Einträge in Warteschlange",sending:"Wird gesendet...",sendingProgress:"Sende {{current}}/{{total}}...",adding:"Wird hinzugefügt...",addingProgress:"Füge hinzu {{current}}/{{total}}...",savingProgress:"Speichere {{current}}/{{total}}...",clearQueue:"Warteschlange leeren",clearHistory:"Verlauf löschen",emptyQueue:"Warteschlange ist leer",position:"Position",scheduledTime:"Geplante Zeit",moveUp:"Nach oben",moveDown:"Nach unten",startNow:"Jetzt starten",printingInProgress:"Druck läuft...",viewArchive:"Archiv anzeigen",viewInFileManager:"Im Dateimanager anzeigen",itemCount:"{{count}} Element",itemCount_plural:"{{count}} Elemente",dragToReorder:"Ziehen zum Neuordnen (nur Sofort)",reorderHint:"Position betrifft nur Sofort-Elemente. Geplante Elemente werden zur festgelegten Zeit ausgeführt.",sjf:{label:"SJF",tooltip:"Kürzester Auftrag zuerst — Scheduler bevorzugt kürzere Drucke"},addedBy:"Hinzugefügt von {{name}}",nextInQueue:"Nächster in der Warteschlange",clearPlate:"Druckplatte freigeben & Nächsten starten",clearPlateSuccess:"Druckplatte freigegeben — bereit für nächsten Druck",plateReady:"Druckplatte freigegeben — bereit für nächsten Druck",plateNumber:"Platte {{index}}",quantity:"Menge",quantityHint:"Erstellt {{count}} Warteschlangeneinträge",activeBatches:"Aktive Stapel",batchProgress:"{{completed}} von {{total}} abgeschlossen",cancelBatch:"Verbleibende abbrechen",batchCancelled:"Verbleibende Stapeleinträge abgebrochen",cancelBatchConfirmTitle:"Stapel abbrechen",cancelBatchConfirmMessage:"Alle verbleibenden ausstehenden Einträge in diesem Stapel abbrechen?",batch:"Stapel",sections:{currentlyPrinting:"Aktuell druckend",queued:"In Warteschlange",history:"Verlauf"},status:{pending:"Ausstehend",waiting:"Wartend",printing:"Druckt",paused:"Pausiert",completed:"Abgeschlossen",failed:"Fehlgeschlagen",skipped:"Übersprungen",cancelled:"Abgebrochen"},summary:{printing:"Druckt",queued:"In Warteschlange",totalTime:"Gesamte Wartezeit",totalWeight:"Gesamtgewicht der Warteschlange",history:"Verlauf"},filter:{allPrinters:"Alle Drucker",unassigned:"Nicht zugewiesen",allStatus:"Alle Status",allLocations:"Alle Standorte",any:"Beliebig"},sort:{byPosition:"Nach Position sortieren",byName:"Nach Name sortieren",byPrinter:"Nach Drucker sortieren",bySchedule:"Nach Zeitplan sortieren",byDate:"Nach Datum sortieren",ascendingOldest:"Aufsteigend (älteste zuerst)",descendingNewest:"Absteigend (neueste zuerst)"},badges:{staged:"Bereitgestellt",requiresPrevious:"Erfordert vorherigen Erfolg",autoPowerOff:"Automatisch ausschalten",gcodeInjection:"G-code"},empty:{title:"Keine Drucke geplant",description:'Planen Sie einen Druck von der Archivseite über die Option "Planen" im Kontextmenü oder ziehen Sie Dateien hierher.'},time:{asap:"Sofort",overdue:"Überfällig",now:"Jetzt",lessThanMinute:"In weniger als einer Minute",inMinutes:"In {{count}} Min",inHours:"In {{count}} Stunden"},actions:{stopPrint:"Druck stoppen",startPrint:"Druck starten",requeue:"Erneut einreihen"},bulkEdit:{title:"{{count}} Element bearbeiten",title_plural:"{{count}} Elemente bearbeiten",description:"Nur geänderte Einstellungen werden auf ausgewählte Elemente angewendet.",printer:"Drucker",noChange:"— Keine Änderung —",queueOptions:"Warteschlangenoptionen",staged:"Bereitgestellt (manueller Start)",autoPowerOff:"Nach Druck automatisch ausschalten",requirePrevious:"Vorherigen Erfolg erfordern",printOptions:"Druckoptionen",bedLevelling:"Bett-Nivellierung",flowCalibration:"Fluss-Kalibrierung",vibrationCalibration:"Vibrations-Kalibrierung",layerInspection:"Erste-Schicht-Prüfung",timelapse:"Zeitraffer",useAms:"AMS verwenden",applyChanges:"Änderungen übernehmen",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",selected:"{{count}} ausgewählt",editSelected:"Ausgewählte bearbeiten",cancelSelected:"Ausgewählte abbrechen"},confirm:{cancelTitle:"Geplanten Druck abbrechen",cancelMessage:'Möchten Sie "{{name}}" wirklich abbrechen?',stopTitle:"Druck stoppen",stopMessage:'Möchten Sie den aktuellen Druck "{{name}}" wirklich stoppen? Der Druckauftrag wird am Drucker abgebrochen.',removeTitle:"Aus Verlauf entfernen",removeMessage:'Möchten Sie "{{name}}" wirklich aus dem Warteschlangenverlauf entfernen?',clearHistoryTitle:"Verlauf löschen",clearHistoryMessage:"Möchten Sie alle {{count}} Element(e) aus dem Verlauf entfernen?",cancelButton:"Druck abbrechen",stopButton:"Druck stoppen",thisPrint:"diesen Druck",thisItem:"dieses Element"},toast:{cancelled:"Warteschlangenelement abgebrochen",cancelFailed:"Element konnte nicht abgebrochen werden",removed:"Warteschlangenelement entfernt",removeFailed:"Element konnte nicht entfernt werden",stopped:"Druck gestoppt",stopFailed:"Druck konnte nicht gestoppt werden",released:"Druck in Warteschlange freigegeben",startFailed:"Druck konnte nicht gestartet werden",reorderFailed:"Warteschlange konnte nicht neu geordnet werden",historyCleared:"{{count}} Verlaufselement(e) gelöscht",clearHistoryFailed:"Verlauf konnte nicht gelöscht werden",updateFailed:"Elemente konnten nicht aktualisiert werden",bulkCancelled:"{{count}} Element(e) abgebrochen",bulkCancelFailed:"Elemente konnten nicht abgebrochen werden"},timeline:{listView:"Liste",timelineView:"Zeitstrahl",unassigned:"Nicht zugewiesen",noData:"Keine geplanten Drucke für diesen Tag",allDoneBy:"Alle Drucke voraussichtlich fertig um {{time}}",staged:"Bereitgestellt",filterAll:"Alle anzeigen",filterPrinting:"Druckend",filterQueued:"Warteschlange",time:{anyMoment:"jeden Moment",minutesLeft:"{{minutes}}m übrig",hoursLeft:"{{hours}}h übrig",hoursMinutesLeft:"{{hours}}h {{minutes}}m übrig"},day:{previous:"Vorheriger Tag",next:"Nächster Tag",today:"Heute"}},permissions:{noStopPrint:"Sie haben keine Berechtigung, Drucke zu stoppen",noStartPrint:"Sie haben keine Berechtigung, Drucke zu starten",noEdit:"Sie haben keine Berechtigung, dieses Warteschlangenelement zu bearbeiten",noCancel:"Sie haben keine Berechtigung, dieses Warteschlangenelement abzubrechen",noRequeue:"Sie haben keine Berechtigung, Elemente erneut einzureihen",noRemove:"Sie haben keine Berechtigung, dieses Warteschlangenelement zu entfernen",noClearHistory:"Sie haben keine Berechtigung, den gesamten Verlauf zu löschen",noEditItems:"Sie haben keine Berechtigung, Warteschlangenelemente zu bearbeiten",noCancelItems:"Sie haben keine Berechtigung, Warteschlangenelemente abzubrechen"}},backgroundDispatch:{unknownFile:"Unbekannte Datei",unknownPrinter:"Unbekannter Drucker",startingPrints:"Starte Drucke",progressSummary:"{{complete}}/{{total}} abgeschlossen • Geplant: {{dispatched}} • In Bearbeitung: {{processing}}",expandDetails:"Dispatch-Details ausklappen",collapseDetails:"Dispatch-Details einklappen",dismissToast:"Dispatch-Hinweis schließen",cancelDispatchJob:"Dispatch-Job abbrechen",cancel:"Abbrechen",cancelling:"Wird abgebrochen…",status:{dispatched:"Geplant",processing:"In Bearbeitung",completed:"Abgeschlossen",failed:"Fehlgeschlagen",cancelled:"Abgebrochen"},toast:{cancellingUpload:"Upload wird abgebrochen...",cancelled:"Dispatch abgebrochen",cancelFailed:"Dispatch konnte nicht abgebrochen werden",completeWithFailures:"Background Dispatch abgeschlossen: {{completed}} erfolgreich, {{failed}} fehlgeschlagen",completeSuccess:"Background Dispatch abgeschlossen: {{completed}} erfolgreich",printStartedRemaining:"{{completed}} Druck(e) gestartet, {{remaining}} weitere werden gesendet..."}},stats:{title:"Dashboard",subtitle:"Widgets zum Neuanordnen ziehen. Auf das Augensymbol klicken zum Ausblenden.",overview:"Übersicht",totalPrints:"Gesamtdrucke",successRate:"Erfolgsrate",totalPrintTime:"Gesamtdruckzeit",printTime:"Druckzeit",totalFilament:"Gesamtverbrauch Filament",filamentUsed:"Filamentverbrauch",filamentCost:"Filamentkosten",totalCost:"Gesamtkosten",energyUsed:"Energieverbrauch",energyCost:"Energiekosten",energyWarmingUpTooltip:"Die Energieerfassung sammelt noch stündliche Snapshots. Zeitraumwerte werden genau, sobald vor dem gewählten Bereich mindestens ein Snapshot vorliegt. Frühe Werte können zu niedrig sein.",averagePrintTime:"Durchschnittliche Druckzeit",printsPerDay:"Drucke pro Tag",byPrinter:"Nach Drucker",printsByPrinter:"Drucke nach Drucker",byMaterial:"Nach Material",byMonth:"Nach Monat",last7Days:"Letzte 7 Tage",last30Days:"Letzte 30 Tage",last90Days:"Letzte 90 Tage",allTime:"Gesamt",quickStats:"Schnellstatistiken",printActivity:"Druckaktivität",filamentTypes:"Filamenttypen",filamentTrends:"Filamenttrends",failureAnalysis:"Fehleranalyse",timeAccuracy:"Zeitgenauigkeit",successful:"Erfolgreich:",failed:"Fehlgeschlagen:",perfectEstimate:"100% = perfekte Schätzung",noTimeAccuracyData:"Noch keine Zeitgenauigkeitsdaten",noFilamentData:"Keine Filamentdaten verfügbar",noPrinterData:"Keine Druckerdaten verfügbar",noPrintData:"Keine Druckdaten verfügbar",noPrintDataLast30Days:"Keine Druckdaten in den letzten 30 Tagen",failureReasons:"Fehlerursachen",topFailureReasons:"Häufigste Fehlerursachen",failedPrintsCount:"{{failed}} / {{total}} Drucke fehlgeschlagen",lastWeekRate:"Letzte Woche: {{rate}}%",resetLayout:"Layout zurücksetzen",recalculateCosts:"Kosten neu berechnen",recalculateCostsHint:"Alle Archivkosten mit aktuellen Filamentpreisen neu berechnen",exportStats:"Statistiken exportieren",exportAsCsv:"Als CSV exportieren",exportAsExcel:"Als Excel exportieren",hiddenCount:"{{count}} ausgeblendet",exportDownloaded:"Export heruntergeladen",exportFailed:"Export fehlgeschlagen",layoutReset:"Layout zurückgesetzt",recalculatedCosts:"Kosten für {{count}} Archive neu berechnet",recalculateFailed:"Kosten konnten nicht neu berechnet werden",loadingStats:"Statistiken werden geladen...",noPermissionResetLayout:"Sie haben keine Berechtigung, das Layout zurückzusetzen",noPermissionRecalculate:"Sie haben keine Berechtigung, Kosten neu zu berechnen",noPrintDataInRange:"Keine Druckdaten im ausgewählten Zeitraum",periodFilament:"Filamentverbrauch",periodCost:"Kosten",avgPerPrint:"Durchschnitt pro Druck",usageOverTime:"Verbrauch im Zeitverlauf",filamentByWeight:"Gewicht",printDuration:"Druckdauer",printerUtilization:"Druckerauslastung",filamentSuccess:"Erfolg nach Material",printHabits:"Druckgewohnheiten",printTimeOfDay:"Druck-Tageszeit",colorDistribution:"Farbverteilung",noColorData:"Keine Farbdaten verfügbar",records:"Rekorde",longestPrint:"Längster Druck",heaviestPrint:"Schwerster Druck",mostExpensivePrint:"Teuerster Druck",busiestDay:"Aktivster Tag",successStreak:"Erfolgsserie",streakPrint:"aufeinanderfolgender Druck",streakPrints:"{{count}} aufeinanderfolgende Drucke",printerStats:"Druckerstatistiken",hours:"Stunden",avgPrints:"Ø Drucke",noArchiveData:"Keine Druckdaten verfügbar",filamentByTime:"Zeitverlauf",avgWeight:"Ø Gewicht",avgTime:"Ø Zeit",filamentByPrints:"Drucke",timeframe:{today:"Heute","this-week":"Diese Woche","this-month":"Dieser Monat","last-7":"Letzte 7 Tage","last-30":"Letzte 30 Tage","last-90":"Letzte 90 Tage","this-year":"Dieses Jahr","all-time":"Gesamt",custom:"Benutzerdefiniert",from:"Von",to:"Bis"},allUsers:"Alle Benutzer",noUser:"Kein Benutzer (System)",filterByUser:"Nach Benutzer filtern"},maintenance:{title:"Wartung",overview:"Übersicht",allOk:"Alle Wartungen aktuell",dueCount:"{{count}} Aufgabe fällig",dueCount_plural:"{{count}} Aufgaben fällig",warningCount:"{{count}} Warnung",warningCount_plural:"{{count}} Warnungen",totalPrintTime:"Gesamtdruckzeit",nextMaintenance:"Nächste Wartung",nothingDue:"Nichts fällig",tasks:"Aufgaben",lastPerformed:"Zuletzt durchgeführt",interval:"Intervall",hoursRemaining:"{{hours}}h verbleibend",hoursOverdue:"{{hours}}h überfällig",markDone:"Als erledigt markieren",performMaintenance:"Wartung durchführen",history:"Verlauf",noHistory:"Kein Wartungsverlauf",editPrintHours:"Druckstunden bearbeiten",currentHours:"Aktuelle Stunden",statusTab:"Status",settingsTab:"Einstellungen",overdueCount:"{{count}} überfällig",dueSoonCount:"{{count}} bald fällig",dueSoon:"Bald fällig",allGood:"Alles in Ordnung",overdueBy:"Überfällig um {{duration}}",dueIn:"Fällig in {{duration}}",timeLeft:"{{duration}} verbleibend",day:"1 Tag",days:"{{count}} Tage",week:"1 Woche",weeks:"{{count}} Wochen",month:"1 Monat",months:"{{count}} Monate",year:"1 Jahr",maintenanceTypes:"Wartungstypen",maintenanceTypesDescription:"Systemtypen und Ihre benutzerdefinierten Wartungsaufgaben",addCustomType:"Benutzerdefinierten Typ hinzufügen",restoreDefaults:"Standardaufgaben wiederherstellen",intervalType:"Intervalltyp",intervalValue:"Intervall ({{type}})",icon:"Symbol",documentationLink:"Dokumentationslink (optional)",assignToPrinters:"Druckern zuweisen",selectAtLeastOnePrinter:"Wählen Sie mindestens einen Drucker",addType:"Typ hinzufügen",custom:"Benutzerdefiniert",printHours:"Druckstunden",calendarDays:"Kalendertage",exampleName:"z.B. HEPA-Filter ersetzen",viewDocumentation:"Dokumentation anzeigen",timeBasedInterval:"Zeitbasiertes Intervall",intervalOverrides:"Intervall-Überschreibungen",intervalOverridesDescription:"Intervalle für bestimmte Drucker anpassen",assignedToPrinters:"Druckern zugewiesen:",noPrintersAssigned:"Keine Drucker zugewiesen",addPrinterShort:"Hinzufügen:",printersAssignedClick:"{{count}} Drucker zugewiesen - klicken zum Verwalten",removeFromPrinter:"Von diesem Drucker entfernen",types:{lubricateCarbonRods:"Karbonstäbe schmieren",lubricateRails:"Linearschienen schmieren",cleanNozzle:"Düse/Hotend reinigen",checkBelts:"Riemenspannung prüfen",cleanBuildPlate:"Druckbett reinigen",checkExtruder:"Extruderzahnräder prüfen",checkCooling:"Kühlungslüfter prüfen",generalInspection:"Allgemeine Inspektion",cleanCarbonRods:"Kohlenstoffstangen reinigen",lubricateSteelRods:"Stahlstangen schmieren",cleanSteelRods:"Stahlstangen reinigen",cleanLinearRails:"Linearschienen reinigen",checkPtfeTube:"PTFE-Schlauch prüfen",replaceHepaFilter:"HEPA-Filter ersetzen",replaceCarbonFilter:"Aktivkohlefilter ersetzen",lubricateLeftNozzleRail:"Linke Düsenschiene schmieren"},maintenanceComplete:"Wartung als abgeschlossen markiert",typeUpdated:"Wartungstyp aktualisiert",typeDeleted:"Wartungstyp gelöscht",defaultsRestored:"{{count}} Standardaufgabe(n) wiederhergestellt",printHoursUpdated:"Druckstunden aktualisiert",printerAssigned:"Drucker zugewiesen",printerRemoved:"Drucker entfernt",deleteTypeConfirm:'"{{name}}" löschen?',deleteSystemTypeTitle:"Standard-Wartungsaufgabe löschen?",deleteSystemTypeMessage:'Möchten Sie die Standard-Wartungsaufgabe "{{name}}" wirklich löschen?',noPermissionUpdate:"Sie haben keine Berechtigung, Wartungselemente zu aktualisieren",noPermissionPerform:"Sie haben keine Berechtigung, Wartungen durchzuführen",noPermissionEditTypes:"Sie haben keine Berechtigung, Wartungstypen zu bearbeiten",noPermissionDeleteTypes:"Sie haben keine Berechtigung, Wartungstypen zu löschen",noPermissionEditHours:"Sie haben keine Berechtigung, Druckstunden zu bearbeiten",noPermissionRemovePrinter:"Sie haben keine Berechtigung, Druckerzuweisungen zu entfernen",noPermissionAssignPrinter:"Sie haben keine Berechtigung, Drucker zuzuweisen",noPermissionEditIntervals:"Sie haben keine Berechtigung, Intervalle zu bearbeiten",configureSettings:"Wartungstypen und Intervalle konfigurieren"},settings:{title:"Einstellungen",general:"Allgemein",tabs:{general:"Allgemein",smartPlugs:"Smart Plugs",notifications:"Benachrichtigungen",queue:"Workflow",filament:"Filament",network:"Netzwerk",apiKeys:"API-Schlüssel",virtualPrinter:"Virtueller Drucker",spoolbuddy:"SpoolBuddy",failureDetection:"Fehlererkennung",users:"Authentifizierung",backup:"Sicherung",emailAuth:"E-Mail-Authentifizierung",ldap:"LDAP",twoFa:"Zwei-Faktor-Auth",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy-Geräte",infoBody:"SpoolBuddy-Kioske registrieren sich automatisch per Heartbeat. Ein Gerät hier abmelden, wenn es nicht mehr verwendet wird oder wenn ein veralteter Eintrag nach einem Daemon-Absturz übrig geblieben ist.",duplicatesTitle:"{{count}} Geräte registriert",duplicatesBody:"Die Kiosk-Oberfläche verwendet nur das zuerst registrierte Gerät. Falls eines davon ein veralteter Doppeleintrag nach einem Absturz ist, kann es hier entfernt werden — ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.",empty:"Noch keine SpoolBuddy-Geräte registriert.",online:"Online",offline:"Offline",unregister:"Abmelden",unregisterSuccess:"Gerät abgemeldet",unregisterError:"Gerät konnte nicht abgemeldet werden",confirmTitle:"SpoolBuddy-Gerät abmelden?",confirmBody:'Dies entfernt „{{hostname}}" ({{deviceId}}) aus der Datenbank. Ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.',ipAddress:"IP-Adresse",firmware:"Firmware",lastSeen:"Zuletzt gesehen",daemonUptime:"Daemon-Laufzeit",systemUptime:"System-Laufzeit",never:"nie",nfc:"NFC",scale:"Waage",cpuTemp:"CPU-Temp.",memory:"Speicher",disk:"Festplatte",update:"Aktualisieren",updateConfirmTitle:"Spoolbuddy-Daemon aktualisieren?",updateConfirmBody:'Software-Update auf „{{hostname}}" auslösen? Der Daemon startet nach dem Update neu.',restartBrowser:"Browser neu starten",restartBrowserConfirmTitle:"Kiosk-Browser neu starten?",restartBrowserConfirmBody:'Kiosk-Browser auf „{{hostname}}" neu starten? Die Anzeige wird kurz schwarz.',restartDaemon:"Daemon neu starten",restartDaemonConfirmTitle:"Spoolbuddy-Daemon neu starten?",restartDaemonConfirmBody:'Spoolbuddy-Daemon auf „{{hostname}}" neu starten? Das Gerät ist für einige Sekunden offline.',reboot:"Neustart",rebootConfirmTitle:"Gerät neu starten?",rebootConfirmBody:'„{{hostname}}" neu starten? Das Gerät ist für etwa eine Minute offline.',shutdown:"Herunterfahren",shutdownConfirmTitle:"Gerät herunterfahren?",shutdownConfirmBody:'„{{hostname}}" herunterfahren? Physischer Zugriff ist nötig, um es wieder einzuschalten.',commandConfirm:"Bestätigen",commandQueued:"Befehl eingereiht",commandError:"Befehl konnte nicht gesendet werden"},ldap:{title:"LDAP-Authentifizierung",enabledDesc:"LDAP-Authentifizierung ist aktiviert",disabledDesc:"LDAP-Authentifizierung ist deaktiviert",disabledHint:"LDAP-Einstellungen unten konfigurieren und speichern, dann aktivieren.",enabled:"LDAP-Authentifizierung aktiviert",disabled:"LDAP-Authentifizierung deaktiviert",feature1:"Benutzer können sich mit LDAP-Anmeldedaten anmelden",feature2:"Lokales Admin-Konto bleibt als Fallback erhalten",feature3:"LDAP-Gruppen werden bei der Anmeldung BamBuddy-Gruppen zugeordnet",serverConfig:"LDAP-Server-Konfiguration",serverUrl:"Server-URL",serverUrlHint:"Verwenden Sie ldap:// für Standard oder ldaps:// für SSL-Verbindungen",security:"Sicherheit",securityHint:"StartTLS aktualisiert eine einfache Verbindung auf TLS. LDAPS verwendet TLS von Anfang an.",bindDn:"Bind-DN (Dienstkonto)",bindPassword:"Bind-Passwort",searchBase:"Such-Basis-DN",userFilter:"Benutzer-Suchfilter",userFilterHint:"{username} wird durch den Anmeldenamen ersetzt. Verwenden Sie (uid={username}) für OpenLDAP.",autoProvision:"Benutzer automatisch anlegen",autoProvisionHint:"Automatisch ein BamBuddy-Konto bei der ersten LDAP-Anmeldung erstellen",defaultGroup:"Standardgruppe",defaultGroupNone:"— Keine (kein Fallback) —",defaultGroupHint:"Fallback-Gruppe, die zugewiesen wird, wenn sich ein LDAP-Benutzer authentifiziert, aber in keiner zugeordneten LDAP-Gruppe enthalten ist. Leer lassen, um nicht zugeordnete Benutzer ohne Berechtigungen zu belassen.",groupMapping:"Gruppenzuordnung (JSON)",groupMappingHint:"LDAP-Gruppen-DNs BamBuddy-Gruppen zuordnen. Verfügbare Gruppen: ",testConnection:"Verbindung testen",settingsSaved:"LDAP-Einstellungen gespeichert",errors:{serverRequired:"LDAP-Server-URL ist erforderlich",searchBaseRequired:"Such-Basis-DN ist erforderlich",enableAuthFirst:"Authentifizierung zuerst aktivieren",configureLdapFirst:"LDAP-Einstellungen zuerst speichern"}},email:{smtpSettings:"SMTP-Konfiguration",smtpHost:"SMTP-Server",smtpPort:"SMTP-Port",security:"Sicherheit",authentication:"Authentifizierung",username:"Benutzername",password:"Passwort",fromEmail:"Absender-E-Mail",fromName:"Absendername",testConnection:"SMTP-Verbindung testen",testRecipient:"Test-Empfänger-E-Mail",sendTest:"Test-E-Mail senden",sending:"Wird gesendet...",save:"Einstellungen speichern",saving:"Wird gespeichert...",advancedAuth:"Erweiterte Authentifizierung",advancedAuthEnabled:"Erweiterte Authentifizierung ist aktiviert",advancedAuthEnabledDesc:"E-Mail-basierte Benutzerverwaltungsfunktionen sind aktiv. Neue Benutzer erhalten automatisch generierte Passwörter per E-Mail und können ihr Passwort über die Passwort vergessen Funktion zurücksetzen.",advancedAuthDisabled:"Erweiterte Authentifizierung ist deaktiviert",advancedAuthDisabledDesc:"Aktivieren Sie die erweiterte Authentifizierung, um E-Mail-basierte Funktionen für die Benutzerverwaltung zu aktivieren.",enable:"Aktivieren",disable:"Deaktivieren",feature1:"Passwörter werden automatisch generiert und an neue Benutzer gesendet",feature2:"Benutzer können sich mit Benutzername oder E-Mail anmelden",feature3:"Passwort vergessen Funktion ist verfügbar",feature4:"Administratoren können Benutzerpasswörter per E-Mail zurücksetzen",errors:{requiredFields:"Bitte füllen Sie alle Pflichtfelder aus",usernameRequired:"Benutzername ist erforderlich, wenn Authentifizierung aktiviert ist",enterTestEmail:"Bitte geben Sie eine Test-E-Mail-Adresse ein",smtpServerAndEmail:"Bitte füllen Sie SMTP-Server und Absender-E-Mail aus, bevor Sie testen",usernamePasswordRequired:"Benutzername und Passwort sind erforderlich, wenn Authentifizierung aktiviert ist",configureSmtpFirst:"Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen",enableAuthFirst:"Bitte aktivieren Sie zuerst die Authentifizierung, um E-Mail-basierte Funktionen nutzen zu können."},success:{settingsSaved:"SMTP-Einstellungen erfolgreich gespeichert"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"Keine (Port 25)"},authOptions:{enabled:"Aktiviert",disabled:"Deaktiviert"}},appearance:"Erscheinungsbild",notifications:"Benachrichtigungen",smartPlugs:"Smart Plugs",spoolman:"Spoolman",updates:"Updates",language:"Sprache",languageDescription:"Wählen Sie Ihre bevorzugte Sprache",theme:"Design",themeLight:"Hell",themeDark:"Dunkel",themeSystem:"System",defaultView:"Standardansicht",defaultViewDescription:"Seite, die beim Öffnen der App angezeigt wird",checkForUpdates:"Nach Updates suchen",autoUpdate:"Automatische Updates",currentVersion:"Aktuelle Version",latestVersion:"Neueste Version",upToDate:"Sie sind auf dem neuesten Stand",updateAvailable:"Update verfügbar",notificationLanguage:"Benachrichtigungssprache",notificationLanguageDescription:"Sprache für Push-Benachrichtigungen",bedCooledThreshold:"Bett-Abkühlung Schwellenwert",bedCooledThresholdDescription:"Temperatur, unter der das Bett nach einem Druck als abgekühlt gilt",userNotificationsEnabled:"Benutzerbenachrichtigungen",userNotificationsEnabledDescription:"Aktiviert das Benutzerbenachrichtigungsmenü und E-Mail-Benachrichtigungen für Druckereignisse. Erfordert Erweiterte Authentifizierung.",userNotificationsDisabledHint:"Erweiterte Authentifizierung aktivieren, um Benutzerbenachrichtigungen zu verwenden.",notificationProviders:"Benachrichtigungsanbieter",addProvider:"Anbieter hinzufügen",editProvider:"Anbieter bearbeiten",providerType:"Anbietertyp",testNotification:"Testbenachrichtigung",testSuccess:"Testbenachrichtigung erfolgreich gesendet",testFailed:"Testbenachrichtigung konnte nicht gesendet werden",quietHours:"Ruhezeiten",quietHoursDescription:"Keine Störungen während dieser Zeiten",quietHoursStart:"Beginn",quietHoursEnd:"Ende",events:{title:"Benachrichtigungsereignisse",printStart:"Druck gestartet",printComplete:"Druck abgeschlossen",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",printProgress:"Fortschrittsmeldungen",printProgressDescription:"Bei 25%, 50%, 75% benachrichtigen",printerOffline:"Drucker offline",printerError:"Druckerfehler",filamentLow:"Filament niedrig",maintenanceDue:"Wartung fällig",maintenanceDueDescription:"Benachrichtigen, wenn Wartung erforderlich"},smartPlug:{title:"Smart Plugs",add:"Smart Plug hinzufügen",edit:"Smart Plug bearbeiten",name:"Name",ipAddress:"IP-Adresse",linkedPrinter:"Verknüpfter Drucker",autoOn:"Automatisch einschalten",autoOnDescription:"Einschalten beim Druckstart",autoOff:"Automatisch ausschalten",autoOffDescription:"Ausschalten nach Druckende",offDelay:"Ausschaltverzögerung",offDelayMinutes:"Minuten nach Druck",offDelayTemp:"Wenn Düse unter Temperatur",currentState:"Aktueller Status",turnOn:"Einschalten",turnOff:"Ausschalten"},filamentTracking:"Filament-Verfolgung",filamentTrackingDesc:"Wählen Sie, wie Sie Ihre Filamentspulen verfolgen möchten. Sie können das integrierte Inventar oder einen externen Spoolman-Server verwenden.",filamentChecks:"Filament-Prüfungen",disableFilamentWarnings:"Filament-Warnungen deaktivieren",disableFilamentWarningsDesc:"Keine Warnungen über unzureichendes Filament beim Drucken oder Einreihen anzeigen",preferLowestFilament:"Niedrigsten Filamentrest bevorzugen",preferLowestFilamentDesc:"Bei mehreren passenden Spulen die mit dem geringsten Restfilament verwenden",trackingModeBuiltIn:"Integriertes Inventar",trackingModeBuiltInDesc:"RFID-Erkennung und Verbrauchserfassung inklusive",trackingModeSpoolmanDesc:"Externer Filament-Management-Server",builtInFeatureRfid:"Erkennt automatisch Bambu Lab RFID-Spulen im AMS",builtInFeatureUsage:"Erfasst den Filamentverbrauch pro Druck",builtInFeatureCatalog:"Spulen, Farben und K-Faktor-Profile verwalten",builtInFeatureThirdParty:"Drittanbieter-Spulen können Inventarspulen zugewiesen werden",amsSyncButton:"Gewichte vom AMS synchronisieren",amsSyncTitle:"Spulengewichte vom AMS synchronisieren",amsSyncMessage:"Alle Inventar-Spulengewichte werden mit den aktuellen AMS-Restwerten der verbundenen Drucker überschrieben. Verwenden Sie dies zur Wiederherstellung beschädigter Gewichtsdaten. Drucker müssen online sein.",amsSyncing:"Synchronisiere...",amsSyncSuccess:"{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen",amsSyncError:"Synchronisierung der Gewichte vom AMS fehlgeschlagen",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL Ihres Spoolman-Servers (z.B. http://localhost:7912)",spoolmanConnected:"Verbunden",spoolmanDisconnected:"Nicht verbunden",status:"Status",connect:"Verbinden",disconnect:"Trennen",howSyncWorks:"So funktioniert die Synchronisierung",syncInfoRfidOnly:"Nur offizielle Bambu Lab Spulen mit RFID werden synchronisiert",syncInfoAutoCreate:"Neue Spulen werden bei der ersten Synchronisierung automatisch in Spoolman erstellt",syncInfoThirdPartySkipped:"Nicht-Bambu-Lab-Spulen (Drittanbieter, nachgefüllt) werden übersprungen",linkingExistingSpools:"Vorhandene Spulen verknüpfen",linkingExistingSpoolsDesc:'Um vorhandene Spoolman-Spulen mit Ihrem AMS zu verknüpfen, fahren Sie über einen AMS-Slot und klicken Sie auf "Mit Spoolman verknüpfen".',syncMode:"Synchronisierungsmodus",syncModeAuto:"Automatisch",syncModeManual:"Nur manuell",syncModeAutoDesc:"AMS-Daten werden automatisch synchronisiert, wenn Änderungen erkannt werden",syncModeManualDesc:"Nur bei manueller Auslösung synchronisieren",syncAmsData:"AMS-Daten synchronisieren",syncAmsDataDesc:"AMS-Daten des Druckers manuell mit Spoolman synchronisieren",allPrinters:"Alle Drucker",noDefaultPrinter:"Kein Standard (jedes Mal fragen)",sidebarOrder:"Seitenleisten-Reihenfolge",saveThumbnails:"Vorschaubilder speichern",captureFinishPhoto:"Abschlussfoto aufnehmen",noPrintersConfigured:"Keine Drucker konfiguriert",archiveMode:{always:"Immer Archiveintrag erstellen",never:"Nie Archiveintrag erstellen",ask:"Jedes Mal fragen"},checkForUpdatesLabel:"Nach Updates suchen",checkPrinterFirmware:"Drucker-Firmware prüfen",includeBetaUpdates:"Beta-Versionen einschließen",includeBetaUpdatesDesc:"Über Beta- und Vorabversionen bei der Updateprüfung benachrichtigen",enableRetry:"Wiederholung aktivieren",homeAssistantDescription:"Smart Plugs über Home Assistant steuern",environmentManagedLabel:"(Umgebungsvariable)",autoEnabledViaEnv:"Automatisch über Umgebungsvariablen aktiviert",urlFromEnvReadOnly:"Wert wird über HA_URL Umgebungsvariable gesetzt (schreibgeschützt)",tokenFromEnvReadOnly:"Wert wird über HA_TOKEN Umgebungsvariable gesetzt (schreibgeschützt)",mqttConnectedTo:"Verbunden mit",prometheusDescription:"Druckerdaten im Prometheus-Format bereitstellen",noSmartPlugsTitle:"Keine Smart Plugs konfiguriert",noSmartPlugsDescription:"Fügen Sie einen Tasmota-basierten Smart Plug hinzu, um den Energieverbrauch zu verfolgen und die Stromsteuerung zu automatisieren.",noProvidersTitle:"Keine Anbieter konfiguriert",noProvidersDescription:"Fügen Sie einen Anbieter hinzu, um Benachrichtigungen zu erhalten.",noTemplatesAvailable:"Keine Vorlagen verfügbar. Starten Sie das Backend neu, um Standardvorlagen zu laden.",apiPermissionView:"Druckerstatus und Warteschlange anzeigen",apiPermissionEdit:"Elemente zur Druckwarteschlange hinzufügen und entfernen",apiKeysEmptyTitle:"Keine API-Schlüssel",apiKeysEmptyDescription:"Erstellen Sie einen API-Schlüssel zur Integration mit externen Diensten.",noUsersFound:"Keine Benutzer gefunden",noGroupsFound:"Keine Gruppen gefunden",noGroupsAvailable:"Keine Gruppen verfügbar",passwordsDoNotMatch:"Passwörter stimmen nicht überein",systemGroupWarning:"System-Gruppennamen können nicht geändert werden",authDisabledTitle:"Authentifizierung ist deaktiviert",authDisabledFeature1:"Anmeldung zum Zugriff auf das System erforderlich",authDisabledFeature2:"Mehrere Benutzer mit gruppenbasierten Berechtigungen erstellen",authDisabledFeature3:"Zugriff mit über 50 granularen Berechtigungen steuern",userHasCreated:"Dieser Benutzer hat erstellt:",userItemsQuestion:"Was möchten Sie mit diesen Elementen tun?",deleteUserConfirm:"Möchten Sie diesen Benutzer wirklich löschen?",actionCannotBeUndone:"Diese Aktion kann nicht rückgängig gemacht werden.",addFirstSmartPlug:"Ersten Smart Plug hinzufügen",providers:"Anbieter",log:"Protokoll",testAll:"Alle testen",testResults:"Testergebnisse",testPassedCount:"{{count}} bestanden",testFailedCount:"{{count}} fehlgeschlagen",messageTemplates:"Nachrichtenvorlagen",messageTemplatesDescription:"Passen Sie Benachrichtigungen für jedes Ereignis an.",apiKeys:"API-Schlüssel",apiKeysDescription:"Erstellen Sie API-Schlüssel für externe Integrationen und Webhooks.",createKey:"Schlüssel erstellen",apiKeyCreated:"API-Schlüssel erfolgreich erstellt",apiKeyCopyWarning:"Kopieren Sie diesen Schlüssel jetzt - er wird nicht mehr angezeigt!",useInApiBrowser:"Im API-Browser verwenden",createNewApiKey:"Neuen API-Schlüssel erstellen",keyName:"Schlüsselname",keyNamePlaceholder:"z.B. Home Assistant, OctoPrint",readStatus:"Status lesen",readStatusDescription:"Druckerstatus und Warteschlange anzeigen",manageQueue:"Warteschlange verwalten",manageQueueDescription:"Elemente zur Druckwarteschlange hinzufügen und entfernen",controlPrinter:"Drucker steuern",controlPrinterDescription:"Drucke pausieren, fortsetzen und stoppen",unnamedKey:"Unbenannter Schlüssel",lastUsed:"Zuletzt verwendet",read:"Lesen",control:"Steuern",createFirstKey:"Ersten Schlüssel erstellen",webhookEndpoints:"Webhook-Endpunkte",webhookApiKeyHint:"Verwenden Sie Ihren API-Schlüssel im X-API-Key-Header.",webhook:{getAllStatus:"Alle Druckerstatus abrufen",getSpecificStatus:"Spezifischen Druckerstatus abrufen",addToQueue:"Zur Druckwarteschlange hinzufügen",pausePrint:"Druck pausieren",resumePrint:"Druck fortsetzen",stopPrint:"Druck stoppen"},apiBrowser:"API-Browser",apiBrowserDescription:"Erkunden und testen Sie alle verfügbaren API-Endpunkte.",apiKeyForTesting:"API-Schlüssel zum Testen",apiKeyPlaceholder:"Fügen Sie hier Ihren API-Schlüssel ein, um authentifizierte Endpunkte zu testen...",apiKeyHint:"Dieser Schlüssel wird als X-API-Key-Header mit Anfragen gesendet.",deleteApiKeyTitle:"API-Schlüssel löschen",deleteApiKeyMessage:"Möchten Sie diesen API-Schlüssel wirklich löschen? Alle Integrationen, die diesen Schlüssel verwenden, funktionieren nicht mehr.",deleteKey:"Schlüssel löschen",amsDisplayThresholds:"AMS-Anzeigeschwellenwerte",amsThresholdsDescription:"Konfigurieren Sie Farbschwellenwerte für AMS-Feuchtigkeits- und Temperaturanzeigen.",humidity:"Luftfeuchtigkeit",goodGreen:"Gut (grün)",fairOrange:"Mittel (orange)",aboveFairBad:"Über dem mittleren Schwellenwert wird rot angezeigt (schlecht)",fairAlsoDryingThreshold:"Dieser Schwellenwert wird auch für die automatische Trocknung verwendet",temperature:"Temperatur",goodBlue:"Gut (blau)",aboveFairHot:"Über dem mittleren Schwellenwert wird rot angezeigt (heiß)",historyRetention:"Verlaufsaufbewahrung",keepSensorHistory:"Sensorverlauf behalten für",historyRetentionDescription:"Ältere Feuchtigkeits- und Temperaturdaten werden automatisch gelöscht",defaultPrintOptions:"Standard-Druckoptionen",defaultPrintOptionsDescription:"Standardwerte für Druckoptionen bei neuen Drucken festlegen. Diese können im Druckdialog pro Druck überschrieben werden.",defaultBedLevelling:"Bett-Nivellierung",defaultBedLevellingDesc:"Bett vor dem Druck automatisch nivellieren",defaultFlowCali:"Fluss-Kalibrierung",defaultFlowCaliDesc:"Extrusionsfluss kalibrieren",defaultVibrationCali:"Vibrationskalibrierung",defaultVibrationCaliDesc:"Ringing-Artefakte reduzieren",defaultLayerInspect:"Erste-Schicht-Inspektion",defaultLayerInspectDesc:"KI-Inspektion der ersten Schicht",defaultTimelapse:"Zeitraffer",defaultTimelapseDesc:"Zeitraffervideo aufnehmen",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Druckplatte-Bestätigung",requirePlateClear:"Druckplatte-Bestätigung erforderlich",requirePlateClearDescription:"Wenn aktiviert, wartet der Scheduler auf eine Druckplatte-Bestätigung pro Drucker, bevor geplante Drucke auf Druckern mit abgeschlossenen Aufträgen gestartet werden. Deaktivieren Sie dies für Farm-Workflows, bei denen die Platten physisch überprüft werden.",gcodeInjection:"G-code Injection",gcodeInjectionDescription:'Konfigurieren Sie benutzerdefinierten G-code, der am Anfang und/oder Ende von Drucken für Auto-Print-Systeme wie Farmloop, SwapMod, AutoClear und Printflow 3D eingefügt wird. Snippets werden pro Druckermodell konfiguriert und angewendet, wenn "G-code einfügen" bei einem Warteschlangen-Element aktiviert ist.',gcodeInjectionNoPrinters:"Keine Drucker gefunden. Fügen Sie Drucker hinzu, um G-code-Snippets zu konfigurieren.",gcodeStartLabel:"Start G-code",gcodeEndLabel:"End G-code",gcodeStartPlaceholder:"G-code, der vor dem Druckstart eingefügt wird...",gcodeEndPlaceholder:"G-code, der nach dem Druckende angefügt wird...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Automatische Trocknung",queueDryingDescription:"AMS-Filament automatisch trocknen, wenn der Drucker zwischen Warteschlangen-Drucken im Leerlauf ist. Verwendet den Feuchtigkeitsschwellenwert oben.",queueDryingEnabled:"Automatische Trocknung aktivieren",queueDryingEnabledDescription:"AMS-Trocknung automatisch starten, wenn der Drucker im Leerlauf ist und die Feuchtigkeit über dem Schwellenwert liegt",queueDryingBlock:"Auf Trocknung warten",queueDryingBlockDescription:"Druckwarteschlange blockieren, bis die Trocknung abgeschlossen ist. Wenn aus, haben Drucke Vorrang.",ambientDryingEnabled:"Umgebungstrocknung",ambientDryingEnabledDescription:"Filament auf inaktiven Druckern automatisch trocknen, wenn die Luftfeuchtigkeit den Schwellenwert überschreitet — auch ohne Warteschlange.",dryingPresets:"Trocknungsvoreinstellungen",dryingPresetsDescription:"Temperatur und Dauer pro Filamenttyp. AMS 2 Pro verwendet niedrigere Temperaturen, AMS-HT unterstützt höhere.",dryingFilament:"Filament",printModal:"Druckdialog",expandCustomMapping:"Benutzerdefinierte Zuordnung standardmäßig erweitern",expandCustomMappingDescription:"Bei Druck auf mehrere Drucker die AMS-Zuordnung pro Drucker erweitert anzeigen",authentication:"Authentifizierung",authEnabledDescription:"Ihre Instanz ist mit Benutzerauthentifizierung gesichert",authDisabledDescription:"Aktivieren Sie die Anmeldepflicht und verwalten Sie den Benutzerzugriff",authDisabledMessage:"Aktivieren Sie die Authentifizierung, um Benutzerkonten zu erstellen, Berechtigungen zu verwalten und Ihre Bambuddy-Instanz zu sichern.",enableAuthentication:"Authentifizierung aktivieren",currentUser:"Aktueller Benutzer",changePassword:"Passwort ändern",admin:"Admin",users:"Benutzer",addUser:"Benutzer hinzufügen",groups:"Gruppen",addGroup:"Gruppe hinzufügen",system:"System",noDescription:"Keine Beschreibung",userCount:"{{count}} Benutzer",permissionCount:"{{count}} Berechtigungen",createUser:"Benutzer erstellen",username:"Benutzername",enterUsername:"Benutzername eingeben",password:"Passwort",enterPassword:"Passwort eingeben (min. 6 Zeichen)",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Passwort bestätigen",viewReleaseOnGitHub:"Release auf GitHub anzeigen",turnAllPlugsOn:"Alle Stecker einschalten",turnAllPlugsOff:"Alle Stecker ausschalten",clearNotificationLogs:"Benachrichtigungsprotokolle löschen",clearLogsMessage:"Dadurch werden alle Benachrichtigungsprotokolle, die älter als 30 Tage sind, dauerhaft gelöscht. Diese Aktion kann nicht rückgängig gemacht werden.",clearLogs:"Protokolle löschen",resetUiPreferences:"UI-Einstellungen zurücksetzen",resetUiPreferencesMessage:"Dadurch werden alle UI-Einstellungen auf Standardwerte zurückgesetzt: Seitenleisten-Reihenfolge, Theme, Dashboard-Layout, Ansichtsmodi und Sortiereinstellungen. Ihre Drucker, Archive und Servereinstellungen werden NICHT beeinträchtigt. Die Seite wird nach dem Löschen neu geladen.",resetPreferences:"Einstellungen zurücksetzen",deleteGroupTitle:"Gruppe löschen",deleteGroupMessage:"Möchten Sie diese Gruppe wirklich löschen? Benutzer in dieser Gruppe verlieren diese Berechtigungen.",deleteGroup:"Gruppe löschen",disableAuthenticationTitle:"Authentifizierung deaktivieren",disableAuthenticationMessage:"Möchten Sie die Authentifizierung wirklich deaktivieren? Dadurch wird Ihre Bambuddy-Instanz ohne Anmeldung zugänglich. Alle Benutzer bleiben in der Datenbank, aber die Authentifizierung wird deaktiviert.",disableAuthentication:"Authentifizierung deaktivieren",configureBambuddy:"Bambuddy konfigurieren",systemDefault:"Systemstandard",archiveSettings:"Archiv-Einstellungen",newWindow:"Neues Fenster",embeddedOverlay:"Eingebettetes Overlay",preferredSlicer:"Bevorzugter Slicer",preferredSlicerDescription:"Wähle die Slicer-Anwendung zum Öffnen von Dateien",externalCameras:"Externe Kameras",costTracking:"Kostenverfolgung",printsOnly:"Nur Drucke",totalConsumption:"Gesamtverbrauch",dataManagement:"Datenverwaltung",storageUsage:"Speichernutzung",storageUsageDescription:"Aufschlüsselung der Datennutzung nach Kategorie",storageUsageTotal:"Gesamt",storageUsageErrors:"Fehler",storageUsageOtherBreakdown:"Sonstiges (enthält statische Assets, Skripte und Konfigurationsdateien)",storageUsageSystem:"System",storageUsageData:"Daten",storageUsageUnavailable:"Speichernutzungsinformationen nicht verfügbar",clearNotificationLogsDescription:"Benachrichtigungsprotokolle älter als 30 Tage löschen",resetUiPreferencesDescription:"Seitenleisten-Reihenfolge, Theme, Ansichtsmodi und Layout-Einstellungen zurücksetzen. Drucker, Archive und Einstellungen werden nicht beeinflusst.",enableHomeAssistant:"Home Assistant aktivieren",enableMqtt:"MQTT aktivieren",useTls:"TLS verwenden",enableMetricsEndpoint:"Metrik-Endpunkt aktivieren",availableMetrics:"Verfügbare Metriken",editUser:"Benutzer bearbeiten",deleteUserTitle:"Benutzer löschen",groupName:"Gruppenname",leaveEmptyForAnonymous:"Leer lassen für anonym",leaveEmptyForNoAuth:"Leer lassen für keine Authentifizierung",enterNewPassword:"Neues Passwort eingeben",confirmNewPassword:"Neues Passwort bestätigen",enterGroupName:"Gruppenname eingeben",enterDescriptionOptional:"Beschreibung eingeben (optional)",enterCurrentPassword:"Aktuelles Passwort eingeben",enterNewPasswordMin6:"Neues Passwort eingeben (min. 6 Zeichen)",toast:{keyCopied:"Schlüssel in Zwischenablage kopiert",copyFailed:"Schlüssel konnte nicht kopiert werden",keyAddedToBrowser:"Schlüssel zum API-Browser hinzugefügt",clearLogsFailed:"Protokolle konnten nicht gelöscht werden",uiPreferencesReset:"UI-Einstellungen zurückgesetzt. Wird neu geladen...",authDisabled:"Authentifizierung erfolgreich deaktiviert",authDisableFailed:"Authentifizierung konnte nicht deaktiviert werden",apiKeyCreated:"API-Schlüssel erstellt",apiKeyDeleted:"API-Schlüssel gelöscht",userCreated:"Benutzer erfolgreich erstellt",userUpdated:"Benutzer erfolgreich aktualisiert",userDeleted:"Benutzer erfolgreich gelöscht",groupCreated:"Gruppe erfolgreich erstellt",groupUpdated:"Gruppe erfolgreich aktualisiert",groupDeleted:"Gruppe erfolgreich gelöscht",fillRequiredFields:"Bitte füllen Sie alle erforderlichen Felder aus",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein",enterGroupName:"Bitte geben Sie einen Gruppennamen ein",settingsSaved:"Einstellungen gespeichert",cameraSettingsSaved:"Kamera-Einstellungen gespeichert",enterCameraUrl:"Bitte geben Sie eine Kamera-URL ein",passwordChanged:"Passwort erfolgreich geändert",connectionFailed:"Verbindung fehlgeschlagen",testFailed:"Test fehlgeschlagen",cameraConnected:"Kamera verbunden{{resolution}}"},testConnection:"Verbindung testen",catalog:{spoolCatalog:"Spulenkatalog",spoolCatalogDescription:"Leerspulengewichte nach Marke/Typ. Wird für die automatische Gewichtssuche beim Hinzufügen von Spulen verwendet.",searchCatalog:"Katalog durchsuchen...",addNewEntry:"Neuen Eintrag hinzufügen",namePlaceholder:"Name (z.B. Bambu Lab - Plastik)",weight:"Gewicht",type:"Typ",default:"Standard",custom:"Benutzerdefiniert",noMatch:"Keine Einträge entsprechen Ihrer Suche",empty:"Keine Einträge im Katalog",deleteEntry:"Eintrag löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',resetCatalog:"Katalog zurücksetzen",resetConfirm:"Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Einträge werden entfernt.",loadFailed:"Spulenkatalog konnte nicht geladen werden",nameWeightRequired:"Name und Gewicht sind erforderlich",entryAdded:"Eintrag hinzugefügt",addFailed:"Eintrag konnte nicht hinzugefügt werden",entryUpdated:"Eintrag aktualisiert",updateFailed:"Eintrag konnte nicht aktualisiert werden",entryDeleted:"Eintrag gelöscht",deleteFailed:"Eintrag konnte nicht gelöscht werden",resetSuccess:"Katalog auf Standardwerte zurückgesetzt",resetFailed:"Katalog konnte nicht zurückgesetzt werden",exported:"{{count}} Einträge exportiert",imported:"{{added}} Einträge importiert ({{skipped}} übersprungen)",importFailed:"Import fehlgeschlagen: ungültiges JSON-Format",exportTooltip:"Katalog als JSON exportieren",importTooltip:"Katalog aus JSON importieren",resetTooltip:"Auf Standardwerte zurücksetzen",selectedCount:"{{count}} ausgewählt",deleteSelected:"Ausgewählte löschen",bulkDeleteConfirm:"Möchten Sie {{count}} Einträge wirklich löschen?",bulkDeleted:"{{count}} Einträge gelöscht",bulkDeleteFailed:"Fehler beim Löschen der Einträge"},colorCatalog:{title:"Farbkatalog",description:"Filamentfarben nach Hersteller/Material. Wird für die automatische Farbsuche beim Hinzufügen von Spulen verwendet.",searchColors:"Farben durchsuchen...",allManufacturers:"Alle Hersteller",addNewColor:"Neue Farbe hinzufügen",manufacturer:"Hersteller",colorName:"Farbname",hex:"Hex",materialOptional:"Material (optional)",showing:"{{filtered}} von {{total}} Farben angezeigt",noMatch:"Keine Farben entsprechen Ihrer Suche",empty:"Keine Farben im Katalog",deleteColor:"Farbe löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',resetCatalog:"Farbkatalog zurücksetzen",resetConfirm:"Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Farben werden entfernt.",sync:"Sync",starting:"Starten...",syncTooltip:"Von FilamentColors.xyz synchronisieren (2000+ Farben)",loadFailed:"Farbkatalog konnte nicht geladen werden",fieldsRequired:"Hersteller, Farbname und Hex-Farbe sind erforderlich",colorAdded:"Farbe hinzugefügt",addFailed:"Farbe konnte nicht hinzugefügt werden",colorUpdated:"Farbe aktualisiert",updateFailed:"Farbe konnte nicht aktualisiert werden",colorDeleted:"Farbe gelöscht",deleteFailed:"Farbe konnte nicht gelöscht werden",resetSuccess:"Farbkatalog auf Standardwerte zurückgesetzt",resetFailed:"Katalog konnte nicht zurückgesetzt werden",syncUpToDate:"Bereits aktuell ({{count}} Farben geprüft)",syncComplete:"{{added}} neue Farben hinzugefügt ({{skipped}} bereits vorhanden)",syncError:"Sync-Fehler",syncFailed:"Synchronisierung von FilamentColors.xyz fehlgeschlagen",exported:"{{count}} Farben exportiert",imported:"{{added}} Farben importiert ({{skipped}} übersprungen)",importFailed:"Import fehlgeschlagen: ungültiges JSON-Format",selectedCount:"{{count}} ausgewählt",deleteSelected:"Ausgewählte löschen",bulkDeleteConfirm:"Möchten Sie {{count}} Farben wirklich löschen?",bulkDeleted:"{{count}} Farben gelöscht",bulkDeleteFailed:"Fehler beim Löschen der Farben"},dateFormat:"Datumsformat",dateFormatUs:"US (MM/TT/JJJJ)",dateFormatEu:"EU (TT/MM/JJJJ)",dateFormatIso:"ISO (JJJJ-MM-TT)",timeFormat:"Zeitformat",timeFormat12:"12-Stunden (3:30 PM)",timeFormat24:"24-Stunden (15:30)",defaultPrinter:"Standarddrucker",defaultPrinterDescription:"Diesen Drucker für Uploads, Nachdrucke und andere Vorgänge vorauswählen.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Elemente in der Seitenleiste per Drag & Drop neu anordnen. Hier auf Standardreihenfolge zurücksetzen.",setDefault:"Standard setzen",sidebarOrderSetDefaultHint:"Standard setzen übernimmt die aktuelle Menüreihenfolge für Benutzer, die ihre noch nicht angepasst haben.",sidebarDefaultSet:"Standard-Menüreihenfolge wurde festgelegt.",sidebarDefaultCleared:"Standard-Menüreihenfolge gelöscht.",sidebarDefaultFailed:"Festlegen der Standard-Menüreihenfolge fehlgeschlagen.",reset:"Zurücksetzen",darkMode:"Dunkelmodus",lightMode:"Hellmodus",active:"(aktiv)",background:"Hintergrund",accent:"Akzent",style:"Stil",bgNeutral:"Neutral",bgWarm:"Warm",bgCool:"Kühl",bgOled:"OLED Schwarz",bgSlate:"Schieferblau",bgForest:"Waldgrün",accentGreen:"Grün",accentTeal:"Türkis",accentBlue:"Blau",accentOrange:"Orange",accentPurple:"Lila",accentRed:"Rot",styleClassic:"Klassisch",styleGlow:"Leuchtend",styleVibrant:"Lebendig",themeToggleHint:"Zwischen Hell- und Dunkelmodus mit dem Sonnen-/Mondsymbol in der Seitenleiste wechseln.",autoArchivePrints:"Drucke automatisch archivieren",autoArchiveDescription:"3MF-Dateien automatisch speichern, wenn Drucke abgeschlossen sind",saveThumbnailsDescription:"Vorschaubilder aus 3MF-Dateien extrahieren und speichern",captureFinishPhotoDescription:"Foto von der Druckerkamera aufnehmen, wenn der Druck abgeschlossen ist",ffmpegNotInstalled:"ffmpeg nicht installiert",ffmpegRequired:"Kameraaufnahme benötigt ffmpeg. Installieren über brew install ffmpeg (macOS) oder apt install ffmpeg (Linux).",camera:"Kamera",cameraViewMode:"Kamera-Ansichtsmodus",cameraOverlayDescription:"Kamera öffnet sich als größenveränderbares Overlay auf dem Hauptbildschirm",cameraWindowDescription:"Kamera öffnet sich in einem separaten Browserfenster",externalCamerasDescription:"Externe Kameras konfigurieren, um die eingebaute Druckerkamera zu ersetzen. Unterstützt MJPEG-Streams, RTSP, HTTP-Snapshots und USB-Kameras (V4L2). Wenn aktiviert, wird die externe Kamera für Live-Ansicht und Abschlussfotos verwendet.",cameraPlaceholderUsb:"Gerätepfad (/dev/video0)",cameraPlaceholderUrl:"Kamera-URL (rtsp://... oder http://...)",cameraTypeMjpeg:"MJPEG-Stream",cameraTypeRtsp:"RTSP-Stream",cameraTypeSnapshot:"HTTP-Snapshot",cameraTypeUsb:"USB-Kamera (V4L2)",cameraRotation:"Drehung",test:"Testen",connected:"Verbunden",disconnected:"Getrennt",currency:"Währung",defaultFilamentCost:"Standard-Filamentkosten (pro kg)",electricityCost:"Stromkosten pro kWh",energyDisplayMode:"Energieanzeige-Modus",energyModePrintDescription:"Dashboard zeigt Summe der während Drucken verbrauchten Energie",energyModeTotalDescription:"Dashboard zeigt Gesamtenergie der Smart Plugs",fileManager:"Dateimanager",createArchiveEntry:"Archiveintrag beim Drucken erstellen",createArchiveEntryDescription:"Beim Drucken aus dem Dateimanager optional einen Archiveintrag erstellen",lowDiskSpaceWarning:"Warnung bei wenig Speicherplatz",lowDiskSpaceDescription:"Warnung anzeigen, wenn freier Speicherplatz unter diesen Schwellenwert fällt",printerFirmware:"Drucker-Firmware",checkFirmwareDescription:"Nach Firmware-Updates von Bambu Lab suchen",bambuddySoftware:"Bambuddy Software",autoCheckDescription:"Automatisch beim Start nach neuen Versionen suchen",checkNow:"Jetzt prüfen",updateAvailableVersion:"Update verfügbar: v{{version}}",releaseNotes:"Versionshinweise",updateViaDocker:"Update über Docker Compose:",installUpdate:"Update installieren",latestVersionRunning:"Sie verwenden die neueste Version",failedToCheckUpdates:"Update-Prüfung fehlgeschlagen: {{error}}",backupRestore:"Sicherung & Wiederherstellung",backupRestoreDescription:"Einstellungen exportieren/importieren und GitHub-Backup konfigurieren",goToBackup:"Zur Sicherung",externalUrl:"Externe URL",externalUrlDescription:"Die externe URL, unter der Bambuddy erreichbar ist. Wird für Benachrichtigungsbilder und externe Integrationen verwendet.",bambuddyUrl:"Bambuddy-URL",externalUrlHint:"Protokoll und Port angeben (z.B. http://192.168.1.100:8000)",ftpRetry:"FTP-Wiederholung",ftpRetryDescription:"FTP-Operationen bei unzuverlässigem Drucker-WLAN wiederholen. Gilt für 3MF-Downloads, Druck-Uploads, Zeitraffer-Downloads und Firmware-Updates.",autoRetryDescription:"Fehlgeschlagene FTP-Operationen automatisch wiederholen",retryAttempts:"Wiederholungsversuche",retryDelay:"Wiederholungsverzögerung",connectionTimeout:"Verbindungs-Timeout",time_one:"{{count}} Mal",time_other:"{{count}} Mal",second_one:"{{count}} Sekunde",second_other:"{{count}} Sekunden",nSeconds:"{{count}} Sekunden",increaseForWeakWifi:"Erhöhen für Drucker mit schwachem WLAN",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Mit Home Assistant verbinden, um Smart Plugs über die HA REST-API zu steuern. Unterstützt Switch-, Light-, Input_Boolean- und Script-Entitäten.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Langlebiges Zugriffstoken",haTokenHint:"Token in HA erstellen: Profil → Langlebige Zugriffstoken → Token erstellen",connectionSuccessful:"Verbindung erfolgreich",connectionFailed:"Verbindung fehlgeschlagen",haConnectionSuccess:"Erfolgreich mit Home Assistant verbunden.",haConnectionFailed:"Verbindung zu Home Assistant fehlgeschlagen.",mqttPublishing:"MQTT-Veröffentlichung",mqttDescription:"BamBuddy-Ereignisse an einen externen MQTT-Broker zur Integration mit Node-RED, Home Assistant und anderen Automatisierungssystemen veröffentlichen.",mqttEnableDescription:"Ereignisse an externen MQTT-Broker veröffentlichen",brokerHostname:"Broker-Hostname",port:"Port",usernameOptional:"Benutzername (optional)",passwordOptional:"Passwort (optional)",topicPrefix:"Topic-Präfix",topicPrefixHint:"Topics werden sein: {{prefix}}/printers//status, etc.",prometheusMetrics:"Prometheus-Metriken",prometheusEndpointDescription:"Druckermetriken unter /api/v1/metrics für Prometheus/Grafana-Überwachung bereitstellen.",bearerTokenOptional:"Bearer-Token (optional)",bearerTokenHint:"Wenn gesetzt, müssen Anfragen Authorization: Bearer enthalten",metricsConnectionStatus:"Verbindungsstatus",metricsPrinterState:"Druckerstatus (idle/printing/etc)",metricsPrintProgress:"Druckfortschritt 0-100%",metricsBedTemp:"Betttemperatur",metricsNozzleTemp:"Düsentemperatur",metricsPrintsTotal:"Gesamtdrucke nach Ergebnis",metricsMore:"...und mehr (Schichten, Lüfter, Warteschlange, Filamentverbrauch)",smartPlugsDescription:"Smart Plugs (Tasmota oder Home Assistant) verbinden, um Stromsteuerung zu automatisieren und Energieverbrauch für Ihre Drucker zu verfolgen.",allOn:"Alle Ein",allOff:"Alle Aus",addSmartPlug:"Smart Plug hinzufügen",energySummary:"Energieübersicht",currentPower:"Aktuelle Leistung",plugsOnline:"{{reachable}}/{{total}} Plugs online",today:"Heute",yesterday:"Gestern",total:"Gesamt",enablePlugsForSummary:"Plugs aktivieren, um Energieübersicht zu sehen",addNotificationProvider:"Hinzufügen",systemBadge:"(System)",creating:"Erstellen...",changing:"Ändern...",deleteUserAndItems:"Benutzer UND dessen Elemente löschen",deleteUserKeepItems:"Benutzer löschen, Elemente behalten (werden herrenlos)",ok:"OK",twoFa:{totpTitle:"Authenticator-App (TOTP)",totpDesc:"Verwende eine Authenticator-App wie Google Authenticator, Aegis oder Authy.",emailOtpTitle:"E-Mail OTP",emailOtpDesc:"Sende einen Einmalcode an {{email}} beim Einloggen.",emailOtpNoEmail:"Füge eine E-Mail-Adresse zu deinem Konto hinzu, um diese Methode zu aktivieren.",addEmailFirst:"Dein Konto hat keine E-Mail-Adresse. Bitte einen Administrator, eine hinzuzufügen.",setupTotp:"Authenticator-App einrichten",setupAuthApp:"Authenticator-App einrichten",setupInstructions:"Scanne den QR-Code mit deiner Authenticator-App und bestätige mit einem Code.",manualEntry:"Kein Scanner? Gib dieses Secret manuell ein:",scannedContinue:"Code gescannt — weiter",enterCodeToConfirm:"Gib den 6-stelligen Code aus deiner Authenticator-App ein, um die Einrichtung zu bestätigen.",activate:"Aktivieren",disableTotp:"Authenticator deaktivieren",disableConfirmHint:"Gib einen gültigen TOTP-Code oder einen Backup-Code ein, um den Authenticator zu deaktivieren.",totpDisabled:"Authenticator-App deaktiviert.",emailOtpEnabled:"E-Mail OTP aktiviert.",emailOtpDisabled:"E-Mail OTP deaktiviert.",smtpRequired:"Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen.",invalidCode:"Ungültiger Code. Bitte erneut versuchen.",enableEmailOtp:"E-Mail OTP aktivieren",disableEmailOtp:"E-Mail OTP deaktivieren",emailSetupEnterCode:"Ein Bestätigungscode wurde an Ihre E-Mail-Adresse gesendet. Geben Sie ihn unten ein, um zu bestätigen, dass Ihnen dieses Postfach gehört.",verifyAndEnable:"Verifizieren & Aktivieren",emailDisablePasswordHint:"Geben Sie Ihr Kontopasswort ein, um die Deaktivierung des E-Mail OTP zu bestätigen.",passwordPlaceholder:"Passwort eingeben",backupCodesTitle:"Backup-Codes sichern",backupCodesWarning:"Speichere diese Codes sicher. Jeder Code kann nur einmal verwendet werden und wird nicht erneut angezeigt.",backupCodesRemaining:"{{count}} Backup-Codes verbleibend",savedCodes:"Codes gespeichert",regenBackup:"Backup-Codes neu generieren",regenBackupHint:"Gib deinen aktuellen TOTP-Code ein, um 10 neue Backup-Codes zu generieren. Alle bestehenden Codes werden ungültig.",newBackupCodes:"Neue Backup-Codes",linkedAccounts:"Verknüpfte SSO-Konten",linkedAccountsDesc:"Diese externen Identitätsanbieter sind mit deinem Konto verknüpft.",oidcUnlinked:"Konto getrennt."},oidc:{title:"SSO / OIDC-Anbieter",desc:"Konfiguriere OpenID Connect-Anbieter für Single Sign-On.",addProvider:"Anbieter hinzufügen",newProvider:"Neuer Anbieter",empty:"Noch keine OIDC-Anbieter konfiguriert.",created:"Anbieter erstellt.",updated:"Anbieter aktualisiert.",deleted:"Anbieter gelöscht.",deleteTitle:"Anbieter löschen",deleteMessage:'"{{name}}" löschen? Alle verknüpften Benutzerkonten werden getrennt.',form:{name:"Anzeigename",issuerUrl:"Aussteller-URL",clientId:"Client-ID",clientSecret:"Client-Secret",scopes:"Scopes",iconUrl:"Symbol-URL (optional)",enabled:"Aktiviert",autoCreate:"Benutzer automatisch anlegen",autoCreateDesc:"Erstellt beim ersten Login automatisch ein lokales Konto.",autoLink:"Bestehende Konten automatisch verknüpfen",autoLinkDesc:"Verknüpft beim ersten Login vorhandene lokale Konten anhand der E-Mail-Adresse.",secretHint:"leer lassen zum Beibehalten",secretPlaceholder:"neues Secret"}}},notification:{printStarted:{title:"Druck gestartet",body:"{{printer}}: {{filename}} wird gedruckt"},printCompleted:{title:"Druck abgeschlossen",body:"{{printer}}: {{filename}} erfolgreich abgeschlossen"},printFailed:{title:"Druck fehlgeschlagen",body:"{{printer}}: {{filename}} ist fehlgeschlagen"},printStopped:{title:"Druck gestoppt",body:"{{printer}}: {{filename}} wurde gestoppt"},printProgress:{title:"Druckfortschritt",body:"{{printer}}: {{filename}} ist zu {{percent}}% abgeschlossen"},printerOffline:{title:"Drucker offline",body:"{{printer}} ist offline"},printerError:{title:"Druckerfehler",body:"{{printer}}: {{error}}"},filamentLow:{title:"Filament niedrig",body:"{{printer}}: Filament geht zur Neige"},maintenanceDue:{title:"Wartung fällig",body:"{{printer}}: {{items}} benötigen Aufmerksamkeit"}},errors:{generic:"Etwas ist schiefgelaufen",networkError:"Netzwerkfehler. Bitte überprüfen Sie Ihre Verbindung.",notFound:"Nicht gefunden",unauthorized:"Nicht autorisiert",serverError:"Serverfehler",validationError:"Bitte überprüfen Sie Ihre Eingabe",printerConnectionFailed:"Verbindung zum Drucker fehlgeschlagen",saveFailed:"Speichern fehlgeschlagen",deleteFailed:"Löschen fehlgeschlagen",loadFailed:"Laden der Daten fehlgeschlagen"},hmsErrors:{title:"Fehler - {{name}}",noErrors:"Keine Fehler",viewOnWiki:"Im Bambu Lab Wiki ansehen",clearInstructions:"Löschen Sie die Fehler am Drucker, um sie hier zu entfernen.",clearErrors:"Fehler löschen",clearSuccess:"HMS-Fehler gelöscht",clearFailed:"HMS-Fehler konnten nicht gelöscht werden"},mqttDebug:{title:"MQTT-Debug-Protokoll",searchPlaceholder:"Topic oder Payload suchen...",noMessages:"Noch keine Nachrichten protokolliert",startLoggingHint:'Klicken Sie auf "Protokollierung starten", um MQTT-Nachrichten aufzuzeichnen',noMessagesMatch:"Keine Nachrichten entsprechen Ihrem Filter",adjustFilterHint:"Versuchen Sie, Ihre Such- oder Filterkriterien anzupassen",incoming:"Eingehend",outgoing:"Ausgehend",loggingStopped:"Protokollierung gestoppt",loggingActive:"Protokollierung aktiv - Nachrichten werden automatisch aktualisiert",startLogging:"Protokollierung starten",stopLogging:"Protokollierung stoppen",clearLog:"Protokoll löschen",topic:"Topic",timestamp:"Zeitstempel",direction:"Richtung",all:"Alle"},printerFiles:{title:"Dateimanager",storageUsed:"Belegt:",storageFree:"Frei:",filterPlaceholder:"Dateien filtern...",deleteButton:"Löschen",deleteFiles:"{{count}} Dateien löschen",deleteFileConfirm:'"{{name}}" löschen? Dies kann nicht rückgängig gemacht werden.',deleteFilesConfirm:"{{count}} ausgewählte Dateien löschen? Dies kann nicht rückgängig gemacht werden.",noFiles:"Keine Dateien auf dem Drucker",loadingFiles:"Dateien werden geladen...",failedToLoad:"Dateien konnten nicht geladen werden",toast:{filesDeleted:"{{count}} Datei(en) gelöscht",deleteFailed:"Löschen fehlgeschlagen: {{error}}"}},confirm:{delete:"Möchten Sie dies wirklich löschen?",unsavedChanges:"Sie haben ungespeicherte Änderungen. Möchten Sie wirklich verlassen?",clearQueue:"Möchten Sie die Warteschlange wirklich leeren?"},login:{title:"Bambuddy Anmeldung",subtitle:"Melden Sie sich bei Ihrem Konto an",username:"Benutzername",usernamePlaceholder:"Benutzername eingeben",usernameOrEmail:"Benutzername oder E-Mail",usernameOrEmailPlaceholder:"Benutzername oder @ E-Mail",password:"Passwort",passwordPlaceholder:"Passwort eingeben",signIn:"Anmelden",signingIn:"Anmeldung läuft...",forgotPassword:"Passwort vergessen?",loginSuccess:"Erfolgreich angemeldet",loginFailed:"Anmeldung fehlgeschlagen",enterCredentials:"Bitte Benutzername und Passwort eingeben",enterEmail:"Bitte geben Sie Ihre E-Mail-Adresse ein",oidcLoginFailed:"OIDC-Anmeldung fehlgeschlagen",oidcErrors:{providerError:"Der Identity-Provider hat einen Fehler zurückgegeben",missingParameters:"Dem OIDC-Callback fehlen erforderliche Parameter",invalidState:"OIDC-State ist ungültig oder wurde bereits verwendet",stateExpired:"OIDC-Sitzung abgelaufen — bitte erneut versuchen",providerNotFound:"OIDC-Provider nicht gefunden",discoveryFailed:"OIDC-Discovery-Dokument konnte nicht abgerufen werden",invalidDiscovery:"OIDC-Discovery-Dokument ist ungültig",networkError:"Netzwerkfehler beim OIDC-Token-Austausch",badResponse:"Unerwartete Antwort beim OIDC-Token-Austausch",noIdToken:"OIDC-Provider hat kein ID-Token zurückgegeben",validationFailed:"OIDC-Token-Validierung fehlgeschlagen",nonceMismatch:"OIDC-Nonce stimmt nicht überein — möglicher Replay-Angriff",missingSubClaim:"OIDC-Token enthält keinen Sub-Claim",noLinkedAccount:"Kein lokales Konto mit dieser OIDC-Identität verknüpft",accountInactive:"Ihr Konto ist inaktiv",userResolutionFailed:"Ihr Konto konnte nicht aufgelöst werden",internalError:"Interner Fehler beim OIDC-Login",tokenExchangeFailed:"OIDC-Token-Austausch fehlgeschlagen"},forgotPasswordTitle:"Passwort vergessen",forgotPasswordMessage:"Wenn Sie Ihr Passwort vergessen haben, wenden Sie sich bitte an Ihren Systemadministrator.",forgotPasswordEmailMessage:"Geben Sie Ihre E-Mail-Adresse ein und wir senden Ihnen ein neues Passwort.",emailAddress:"E-Mail-Adresse",emailPlaceholder:"ihre.email@beispiel.de",cancel:"Abbrechen",sending:"Wird gesendet...",sendResetEmail:"Zurücksetzungs-E-Mail senden",howToReset:"So setzen Sie Ihr Passwort zurück:",resetStep1:"Kontaktieren Sie Ihren Bambuddy-Administrator",resetStep2:"Bitten Sie ihn, Ihr Passwort in der Benutzerverwaltung zurückzusetzen",resetStep3:"Er kann ein neues temporäres Passwort für Sie festlegen",resetStep4:"Melden Sie sich mit dem neuen Passwort an und ändern Sie es in den Einstellungen",gotIt:"Verstanden",resetPassword:{title:"Neues Passwort festlegen",subtitle:"Geben Sie unten Ihr neues Passwort ein und bestätigen Sie es.",newPassword:"Neues Passwort",newPasswordPlaceholder:"Mindestens 8 Zeichen",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Neues Passwort wiederholen",saving:"Wird gespeichert…",submit:"Neues Passwort festlegen",backToLogin:"Zurück zur Anmeldung",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 8 Zeichen lang sein",resetFailed:"Passwort zurücksetzen fehlgeschlagen. Der Link ist möglicherweise abgelaufen."},twoFA:{title:"Zwei-Faktor-Authentifizierung",subtitle:"Ihr Konto ist mit 2FA geschützt. Geben Sie unten den Bestätigungscode ein.",methodAuthenticator:"Authenticator-App",methodEmail:"E-Mail-Code",methodBackup:"Wiederherstellungscode",instructionsTotp:"Öffnen Sie Ihre Authenticator-App und geben Sie den 6-stelligen Code für Bambuddy ein.",instructionsEmail:"Ein 6-stelliger Code wurde an Ihre E-Mail-Adresse gesendet. Er ist 10 Minuten gültig.",instructionsEmailNotSent:"Klicken Sie unten, um einen Bestätigungscode per E-Mail zu erhalten.",instructionsBackup:"Geben Sie einen Ihrer 8-stelligen Wiederherstellungscodes ein. Jeder Code kann nur einmal verwendet werden.",sendCodeButton:"Code per E-Mail senden",sendingCode:"Wird gesendet...",resendCode:"Code erneut senden",codeLabel:"Bestätigungscode",backupCodeLabel:"Wiederherstellungscode",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Bestätigen",verifyingButton:"Wird überprüft...",backToLogin:"← Zurück zur Anmeldung",orContinueWith:"oder anmelden mit",signInWith:"Anmelden mit {{provider}}",enterCode:"Bitte geben Sie den Bestätigungscode ein",sendCodeFailed:"Bestätigungscode konnte nicht gesendet werden",invalidCode:"Ungültiger Code. Bitte erneut versuchen."}},setup:{title:"Bambuddy Einrichtung",subtitle:"Konfigurieren Sie die Authentifizierung für Ihre Bambuddy-Instanz",enableAuth:"Authentifizierung aktivieren",adminAccount:"Admin-Konto",adminAccountDesc:"Wenn bereits Admin-Benutzer existieren, wird die Authentifizierung mit den vorhandenen Admin-Konten aktiviert. Lassen Sie die Felder unten leer, um vorhandene Admins zu verwenden, oder geben Sie neue Anmeldedaten ein, um einen neuen Admin-Benutzer zu erstellen.",adminUsername:"Admin-Benutzername",adminPassword:"Admin-Passwort",optionalIfAdminExists:"(optional, wenn Admin-Benutzer existieren)",adminUsernamePlaceholder:"Admin-Benutzernamen eingeben (optional)",adminPasswordPlaceholder:"Admin-Passwort eingeben (optional)",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Admin-Passwort bestätigen",settingUp:"Einrichtung läuft...",completeSetup:"Einrichtung abschließen",toast:{authEnabledAdminCreated:"Authentifizierung aktiviert und Admin-Benutzer erstellt",authEnabledExistingAdmins:"Authentifizierung mit vorhandenen Admin-Benutzern aktiviert",setupCompleted:"Einrichtung abgeschlossen",enterBothCredentials:"Bitte geben Sie sowohl Admin-Benutzernamen als auch Passwort ein, oder lassen Sie beide leer, um vorhandene Admin-Benutzer zu verwenden",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein"}},changePassword:{title:"Passwort ändern",currentPassword:"Aktuelles Passwort",currentPasswordPlaceholder:"Aktuelles Passwort eingeben",newPassword:"Neues Passwort",newPasswordPlaceholder:"Neues Passwort eingeben (min. 6 Zeichen)",confirmPassword:"Neues Passwort bestätigen",confirmPasswordPlaceholder:"Neues Passwort bestätigen",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein",changing:"Wird geändert...",success:"Passwort erfolgreich geändert",failed:"Passwortänderung fehlgeschlagen"},plateAlert:{title:"Druck pausiert!",message:"Objekte auf dem Druckbett erkannt. Der Druck wurde automatisch pausiert. Bitte räumen Sie das Druckbett und setzen Sie den Druck fort.",understand:"Verstanden"},camera:{title:"Kameraansicht",invalidPrinterId:"Ungültige Drucker-ID",live:"Live",snapshot:"Schnappschuss",restartStream:"Stream neu starten",refreshSnapshot:"Schnappschuss aktualisieren",fullscreen:"Vollbild",exitFullscreen:"Vollbild beenden",connectingToCamera:"Verbinde mit Kamera...",capturingSnapshot:"Schnappschuss wird aufgenommen...",connectionLost:"Verbindung verloren",connectionFailed:"Kameraverbindung fehlgeschlagen",reconnecting:"Neuverbindung in {{countdown}}s... (Versuch {{attempt}}/{{max}})",reconnectNow:"Jetzt verbinden",cameraUnavailable:"Kamera nicht verfügbar",cameraUnavailableDesc:"Stellen Sie sicher, dass der Drucker eingeschaltet und verbunden ist.",noCamera:"Keine Kamera verfügbar",retry:"Erneut versuchen",cameraStream:"Kamera-Stream",zoomOut:"Verkleinern",zoomIn:"Vergrößern",resetZoom:"Zoom zurücksetzen",recording:"Aufnahme",startRecording:"Aufnahme starten",stopRecording:"Aufnahme stoppen",chamberLight:"Kammerbeleuchtung umschalten"},groups:{title:"Gruppenverwaltung",subtitle:"Berechtigungsgruppen für Zugriffskontrolle verwalten",backToSettings:"Zurück zu Einstellungen",createGroup:"Gruppe erstellen",noPermission:"Sie haben keine Berechtigung, auf diese Seite zuzugreifen.",system:"System",noDescription:"Keine Beschreibung",usersCount:"{{count}} Benutzer",permissionsCount:"{{count}} Berechtigungen",edit:"Bearbeiten",delete:"Löschen",toast:{created:"Gruppe erfolgreich erstellt",updated:"Gruppe erfolgreich aktualisiert",deleted:"Gruppe erfolgreich gelöscht",enterGroupName:"Bitte geben Sie einen Gruppennamen ein"},modal:{editGroup:"Gruppe bearbeiten",createGroup:"Gruppe erstellen",cancel:"Abbrechen",saving:"Speichern...",creating:"Erstellen...",saveChanges:"Änderungen speichern"},form:{groupName:"Gruppenname",groupNamePlaceholder:"Gruppennamen eingeben",systemGroupWarning:"Systemgruppennamen können nicht geändert werden",description:"Beschreibung",descriptionPlaceholder:"Beschreibung eingeben (optional)",permissions:"Berechtigungen ({{count}} ausgewählt)"},deleteModal:{title:"Gruppe löschen",message:"Sind Sie sicher, dass Sie diese Gruppe löschen möchten? Benutzer in dieser Gruppe verlieren diese Berechtigungen.",confirm:"Gruppe löschen"},editor:{title:"Gruppe bearbeiten",createTitle:"Gruppe erstellen",search:"Berechtigungen suchen...",selectAll:"Alle auswählen",clearAll:"Alle abwählen",permissionsSelected:"{{count}} ausgewählt",noResults:"Keine Berechtigungen entsprechen Ihrer Suche"}},users:{title:"Benutzerverwaltung",subtitle:"Benutzer und deren Zugriff auf Ihre Bambuddy-Instanz verwalten",backToSettings:"Zurück zu Einstellungen",createUser:"Benutzer erstellen",noPermission:"Sie haben keine Berechtigung, auf diese Seite zuzugreifen.",admin:"Admin",noGroups:"Keine Gruppen",active:"Aktiv",inactive:"Inaktiv",edit:"Bearbeiten",delete:"Löschen",system:"System",noGroupsAvailable:"Keine Gruppen verfügbar",table:{username:"Benutzername",groups:"Gruppen",status:"Status",actions:"Aktionen"},toast:{created:"Benutzer erfolgreich erstellt",updated:"Benutzer erfolgreich aktualisiert",deleted:"Benutzer erfolgreich gelöscht",fillRequired:"Bitte füllen Sie alle Pflichtfelder aus",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein"},modal:{createUser:"Benutzer erstellen",editUser:"Benutzer bearbeiten",cancel:"Abbrechen",creating:"Erstellen...",saving:"Speichern...",saveChanges:"Änderungen speichern",advancedAuthSubtitle:"mit erweiterter Authentifizierung"},form:{username:"Benutzername",usernamePlaceholder:"Benutzernamen eingeben",email:"E-Mail",emailPlaceholder:"benutzer@beispiel.de",password:"Passwort",passwordPlaceholder:"Passwort eingeben",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Passwort bestätigen",newPasswordPlaceholder:"Neues Passwort eingeben",confirmNewPasswordPlaceholder:"Neues Passwort bestätigen",leaveBlankToKeep:"leer lassen, um das aktuelle zu behalten",groups:"Gruppen",optional:"optional",autoGeneratedPassword:"Ein sicheres Passwort wird automatisch generiert und per E-Mail an den Benutzer gesendet.",passwordManagedByAdvancedAuth:'Das Passwort wird durch erweiterte Authentifizierung verwaltet. Verwenden Sie "Passwort zurücksetzen", um ein neues Passwort per E-Mail an den Benutzer zu senden.',resetPassword:"Passwort zurücksetzen",resettingPassword:"Passwort wird zurückgesetzt..."},deleteModal:{title:"Benutzer löschen",message:"Sind Sie sicher, dass Sie diesen Benutzer löschen möchten? Diese Aktion kann nicht rückgängig gemacht werden.",confirm:"Benutzer löschen"}},streamOverlay:{title:"Stream-Overlay",invalidPrinterId:"Ungültige Drucker-ID",cameraStream:"Kamera-Stream",progress:"Fortschritt",eta:"ETA",printerIdle:"Drucker ist inaktiv",printerOffline:"Drucker offline",status:{printing:"Druckt",paused:"Pausiert",finished:"Fertig",failed:"Fehlgeschlagen",idle:"Inaktiv",unknown:"Unbekannt"}},profiles:{title:"Profile",subtitle:"Verwalten Sie Ihre Slicer-Voreinstellungen und Druckvorschub-Kalibrierungen",tabs:{cloud:"Cloud-Profile",local:"Lokale Profile",kprofiles:"K-Profile"},localProfiles:{title:"Lokale Profile",subtitle:"Slicer-Voreinstellungen aus OrcaSlicer importieren und verwalten",import:"Profile importieren",importDesc:".bbscfg-, .bbsflmt-, .orca_filament-, .zip- oder .json-Dateien hier ablegen",importing:"Importiere...",search:"Lokale Voreinstellungen durchsuchen...",noPresets:"Noch keine lokalen Voreinstellungen",badge:"Lokal",edit:"Bearbeiten",delete:"Löschen",cancel:"Abbrechen",deleteConfirmTitle:"Voreinstellung löschen",deleteConfirm:"Möchten Sie diese Voreinstellung wirklich löschen? Dies kann nicht rückgängig gemacht werden.",source:"Quelle",inheritsFrom:"Erbt von",filamentType:"Typ",vendor:"Hersteller",compatiblePrinters:"Drucker",nozzleTemp:"Düsentemperatur",cost:"Kosten",density:"Dichte",pressureAdvance:"Druckvorschub",filament:"Filament",process:"Prozess",printer:"Drucker",toast:{importSuccess:"{{count}} Voreinstellung(en) importiert",importSkipped:"{{count}} Voreinstellung(en) übersprungen (Duplikate)",importError:"{{count}} Fehler beim Import",deleted:"Voreinstellung gelöscht",updated:"Voreinstellung aktualisiert"}},connectedAs:"Verbunden als",logout:"Abmelden",noLogoutPermission:"Sie haben keine Berechtigung zum Abmelden",failedToLoad:"Profile konnten nicht geladen werden",retry:"Erneut versuchen",time:{justNow:"Gerade eben",minsAgo:"vor {{count}}m",hoursAgo:"vor {{count}}h",daysAgo:"vor {{count}}d"},toast:{loggedOut:"Abgemeldet"},login:{title:"Mit Bambu Cloud verbinden",subtitle:"Synchronisieren Sie Ihre Slicer-Voreinstellungen geräteübergreifend",email:"E-Mail",password:"Passwort",region:"Region",regionGlobal:"Global",regionChina:"China",verificationCode:"Bestätigungscode",totpCode:"Authenticator-Code",checkEmail:"Prüfen Sie Ihre E-Mail ({{email}}) für einen 6-stelligen Code",enterTotpHint:"Geben Sie den 6-stelligen Code aus Ihrer Authenticator-App ein",accessToken:"Zugriffstoken",accessTokenHint:"Fügen Sie Ihr Bambu Lab Zugriffstoken ein (aus Bambu Studio)",back:"Zurück",loginButton:"Anmelden",verifyButton:"Bestätigen",setTokenButton:"Token setzen",useToken:"Stattdessen Zugriffstoken verwenden",useEmail:"Stattdessen mit E-Mail anmelden",toast:{loggedIn:"Erfolgreich angemeldet",codeSent:"Bestätigungscode an Ihre E-Mail gesendet",enterTotp:"Geben Sie den Code aus Ihrer Authenticator-App ein",tokenSet:"Token erfolgreich gesetzt"}},presets:{myPreset:"Mein Profil (bearbeitbar)",duplicate:"Duplizieren",editable:"Bearbeitbar",failedToLoadDetails:"Profil-Details konnten nicht geladen werden",deleteConfirm:"Dieses Profil löschen?",deleteWarning:'"{{name}}" wird dauerhaft aus Bambu Cloud gelöscht. Dies kann nicht rückgängig gemacht werden.',noDuplicatePermission:"Sie haben keine Berechtigung zum Duplizieren von Profilen",noEditPermission:"Sie haben keine Berechtigung zum Bearbeiten von Profilen",noDeletePermission:"Sie haben keine Berechtigung zum Löschen von Profilen",types:{filament:"Filament-Profil",printer:"Drucker-Profil",process:"Prozess-Profil"},toast:{deleted:"Profil gelöscht",created:"Profil erstellt",updated:"Profil aktualisiert",duplicated:"Profil dupliziert",fieldAdded:'Feld "{{key}}" hinzugefügt',exported:"Profil exportiert"},baseLabel:"Basis: {{name}}",currentLabel:"Aktuell: {{name}}",newPreset:"Neues Profil",editPreset:"Profil bearbeiten",duplicatePreset:"Profil duplizieren",createNewPreset:"Neues Profil erstellen",customizeSettings:"Passen Sie die Einstellungen für Ihr neues Profil an",compareWithBase:"Mit Basis-Profil vergleichen",compare:"Vergleichen",basePreset:"Basis-Profil",selectBasePreset:"Basis-Profil auswählen...",presetName:"Profilname",myCustomPreset:"Mein eigenes Profil",inheritsFrom:"Erbt von",dropJsonToImport:"JSON zum Importieren ablegen",tabs:{common:"Allgemein",allFields:"Alle Felder"},availableFields:"Verfügbare Felder",searchFieldsPlaceholder:"Felder suchen...",noMatchingFields:"Keine passenden Felder",allFieldsAdded:"Alle Felder hinzugefügt",addCustomField:"Eigenes Feld hinzufügen",yourOverrides:"Ihre Überschreibungen",noOverridesYet:"Noch keine Überschreibungen",clickFieldsToAdd:"Klicken Sie links auf Felder, um sie hinzuzufügen",saveAsTemplate:"Als Vorlage speichern",jsonTip:"Tipp: Ziehen Sie eine .json-Datei auf dieses Fenster, um Einstellungen zu importieren"},cloudView:{searchPlaceholder:"Profile suchen...",templates:"Vorlagen",refresh:"Aktualisieren",newPreset:"Neues Profil",clearFilters:"Filter zurücksetzen",compareMode:"Vergleichsmodus",selectAnotherPreset:"Wählen Sie ein weiteres {{type}}-Profil",clickTwoPresets:"Klicken Sie auf zwei Profile des gleichen Typs zum Vergleichen",selectFirst:"1. Erstes auswählen",selectSecond:"2. Zweites auswählen",compareNow:"Jetzt vergleichen",lastSynced:"Zuletzt synchronisiert:",showingCount:"{{showing}} von {{total}} Profilen",noPresetsFound:"Keine Profile gefunden",columns:{filament:"Filament",process:"Prozess",printer:"Drucker"},noFilamentPresets:"Keine Filament-Profile",noProcessPresets:"Keine Prozess-Profile",noPrinterPresets:"Keine Drucker-Profile",filters:{type:"Typ",owner:"Besitzer",printer:"Drucker",nozzle:"Düse",filament:"Filament",layer:"Schicht",all:"Alle",myPresets:"Meine Profile",builtIn:"Voreingestellt",process:"Prozess"},noTemplatesPermission:"Sie haben keine Berechtigung, Vorlagen zu verwalten",noRefreshPermission:"Sie haben keine Berechtigung, Profile zu aktualisieren",noCreatePermission:"Sie haben keine Berechtigung, Profile zu erstellen"},templates:{title:"Schnellvorlagen",noTemplates:"Noch keine Vorlagen",createFirst:"Erstellen Sie Vorlagen aus dem Preset-Editor",typeFilter:"Typ:",deleteTitle:"Vorlage löschen",deleteWarning:"Diese Aktion kann nicht rückgängig gemacht werden",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',namePlaceholder:"Vorlagenname",descriptionPlaceholder:"Beschreibung",settingsJson:"Einstellungen (JSON)",fieldsCount:"{{count}} Felder",shownInModals:"In Dialogen angezeigt",hiddenInModals:"In Dialogen ausgeblendet",apply:"Anwenden",toast:{deleted:"Vorlage gelöscht",updated:"Vorlage aktualisiert",created:"Vorlage erstellt",applied:"Vorlage angewendet"}}},support:{debugLoggingActive:"Debug-Protokollierung ist aktiv",manageLogs:"Verwalten",collectItem7:"Drucker-Verbindungsstatus und Firmware-Versionen",collectItem8:"Integrationsstatus (Spoolman, MQTT, HA)",collectItem9:"Netzwerkschnittstellen (nur Subnetze)",collectItem10:"Python-Paketversionen",collectItem11:"Datenbankzustandsprüfungen",collectItem12:"Docker-Umgebungsdetails"},fileManager:{title:"Dateimanager",subtitle:"Organisieren und verwalten Sie Ihre Druckdateien",uploadFiles:"Dateien hochladen",newFolder:"Neuer Ordner",folderName:"Ordnername",folderNamePlaceholder:"z.B. Funktionsteile",renameFile:"Datei umbenennen",renameFolder:"Ordner umbenennen",moveFiles:"{{count}} Datei(en) verschieben",rootNoFolder:"Stammverzeichnis (Kein Ordner)",current:"aktuell",linkFolder:"Ordner verknüpfen",linkFolderDescription:'"{{name}}" mit einem Projekt oder Archiv verknüpfen für schnellen Zugriff.',project:"Projekt",archive:"Archiv",noProjectsFound:"Keine Projekte gefunden",noArchivesFound:"Keine Archive gefunden",unlink:"Verknüpfung aufheben",link:"Verknüpfen",dragDropFiles:"Dateien hierher ziehen",dropFilesHere:"Dateien hier ablegen",orClickToBrowse:"oder klicken zum Durchsuchen",allFileTypesSupported:"Alle Dateitypen werden unterstützt. ZIP-Dateien werden extrahiert.",zipFilesDetected:"ZIP-Dateien erkannt",zipExtractOptions:"ZIP-Dateien werden extrahiert. Wählen Sie, wie die Ordnerstruktur behandelt werden soll:",preserveZipStructure:"Ordnerstruktur aus ZIP beibehalten",createFolderFromZip:"Ordner aus ZIP-Dateiname erstellen",stlThumbnailGeneration:"STL-Vorschaubildgenerierung",zipMayContainStl:"ZIP-Dateien können STL-Dateien enthalten. Vorschaubilder können während der Extraktion generiert werden.",thumbnailsCanBeGenerated:"Vorschaubilder können für STL-Dateien generiert werden. Große Modelle benötigen möglicherweise mehr Zeit.",generateThumbnailsForStl:"Vorschaubilder für STL-Dateien generieren",threemfDetected:"3MF-Dateien erkannt",threemfExtractionInfo:"Druckermodell, Material, Farbe und Druckeinstellungen werden automatisch aus 3MF-Dateien extrahiert.",willBeExtracted:"Wird extrahiert",filesExtracted:"{{count}} Dateien extrahiert",uploadComplete:"Upload abgeschlossen: {{succeeded}} erfolgreich",uploadFailed:"Hochladen fehlgeschlagen",zipFilesFailed:"{{count}} Dateien fehlgeschlagen",uploading:"Hochladen...",changeLink:"Verknüpfung ändern...",linkTo:"Verknüpfen mit...",linkToProjectOrArchive:"Mit Projekt oder Archiv verknüpfen",addToQueue:"Zur Warteschlange",schedulePrint:"Planen",generateThumbnail:"Vorschaubild generieren",generateThumbnails:"Vorschaubilder generieren",generateThumbnailsForMissing:"Vorschaubilder für STL-Dateien ohne Vorschau generieren",gridView:"Rasteransicht",listView:"Listenansicht",lowDiskSpaceWarning:"Warnung: Wenig Speicherplatz",lowDiskSpaceDetails:"Nur {{free}} frei von {{total}} gesamt. Schwellenwert ist auf {{threshold}} GB eingestellt.",files:"Dateien",folders:"Ordner",size:"Größe",free:"Frei",allFiles:"Alle Dateien",wrap:"Umbrechen",enableTextWrapping:"Textumbruch aktivieren",disableTextWrapping:"Textumbruch deaktivieren",dragToResizeTooltip:"Ziehen zum Ändern der Größe, Doppelklick zum Zurücksetzen",searchFiles:"Dateien suchen...",allTypes:"Alle Typen",prints:"Drucke",ascending:"Aufsteigend",descending:"Absteigend",resultsCount:"{{showing}} von {{total}} Dateien",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",selected:"{{count}} ausgewählt",adding:"Hinzufügen...",loadingFiles:"Dateien werden geladen...",folderIsEmpty:"Ordner ist leer",noFilesYet:"Noch keine Dateien",folderEmptyDescription:"Laden Sie Dateien hoch oder verschieben Sie Dateien in diesen Ordner.",noFilesDescription:"Laden Sie Dateien hoch, um Ihre Druckdateien zu organisieren.",noMatchingFiles:"Keine passenden Dateien",noMatchingFilesDescription:"Keine Dateien entsprechen Ihren aktuellen Such- oder Filterkriterien.",clearFilters:"Filter zurücksetzen",printedCount:"{{count}}x gedruckt",uploadedBy:"Hochgeladen von",deleteFolder:"Ordner löschen",deleteFile:"Datei löschen",deleteFilesCount:"{{count}} Dateien löschen",deleteFolderConfirm:"Möchten Sie diesen Ordner wirklich löschen? Alle Dateien darin werden ebenfalls gelöscht.",deleteFileConfirm:"Möchten Sie diese Datei wirklich löschen?",deleteFilesConfirm:"Möchten Sie {{count}} ausgewählte Dateien wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.",deleting:"Wird gelöscht...",noPermissionRenameFolder:"Sie haben keine Berechtigung, Ordner umzubenennen",noPermissionLinkFolder:"Sie haben keine Berechtigung, Ordner zu verknüpfen",noPermissionDeleteFolder:"Sie haben keine Berechtigung, Ordner zu löschen",noPermissionPrint:"Sie haben keine Berechtigung zum Drucken",noPermissionAddToQueue:"Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen",noPermissionDownload:"Sie haben keine Berechtigung, Dateien herunterzuladen",noPermissionRenameFile:"Sie haben keine Berechtigung, diese Datei umzubenennen",noPermissionGenerateThumbnail:"Sie haben keine Berechtigung, Vorschaubilder zu generieren",noPermissionDeleteFile:"Sie haben keine Berechtigung, diese Datei zu löschen",noPermissionCreateFolder:"Sie haben keine Berechtigung, Ordner zu erstellen",noPermissionUpload:"Sie haben keine Berechtigung, Dateien hochzuladen",noPermissionMoveFiles:"Sie haben keine Berechtigung, Dateien zu verschieben",noPermissionDeleteFiles:"Sie haben keine Berechtigung, Dateien zu löschen",linkExternal:"Extern verknüpfen",linkExternalFolder:"Externen Ordner verknüpfen",linkExternalFolderDescription:"Ein Host-Verzeichnis (NAS, USB, Netzlaufwerk) in den Dateimanager einbinden. Dateien werden nicht kopiert — sie werden direkt vom Originalpfad gelesen.",externalFolderNamePlaceholder:"z.B. NAS-Drucke",externalPath:"Host-Pfad",externalPathHelp:"Absoluter Pfad zum Verzeichnis auf dem Docker-Host. Muss als Bind-Mount in den Container eingebunden sein.",readOnly:"Nur Lesen",readOnlyHelp:"verhindert Uploads und Löschungen",showHiddenFiles:"Versteckte Dateien anzeigen (Punkt-Dateien)",externalFolder:"Externer Ordner",scanFolder:"Scannen",toast:{folderCreated:"Ordner erstellt",folderDeleted:"Ordner gelöscht",fileDeleted:"Datei gelöscht",filesDeleted:"{{count}} Dateien gelöscht",filesMoved:"Dateien verschoben",folderLinked:"Ordner verknüpft",folderUnlinked:"Ordnerverknüpfung aufgehoben",externalFolderLinked:"Externer Ordner verknüpft und gescannt",folderScanned:"Scan abgeschlossen: {{added}} hinzugefügt, {{removed}} entfernt",addedToQueue:"{{count}} Datei(en) zur Warteschlange hinzugefügt",addedToQueuePartial:"{{added}} Datei(en) hinzugefügt, {{failed}} fehlgeschlagen",failedToAddToQueue:"Fehler beim Hinzufügen: {{error}}",fileRenamed:"Datei umbenannt",folderRenamed:"Ordner umbenannt",thumbnailsGenerated:"{{count}} Vorschaubild(er) generiert",thumbnailsGeneratedPartial:"{{succeeded}} Vorschaubild(er) generiert, {{failed}} fehlgeschlagen",noStlMissingThumbnails:"Keine STL-Dateien ohne Vorschaubild",failedToGenerateThumbnails:"Fehler beim Generieren der Vorschaubilder: {{error}}",thumbnailGenerated:"Vorschaubild generiert",failedToGenerateThumbnail:"Fehler beim Generieren des Vorschaubildes: {{error}}"}},projects:{title:"Projekte",subtitle:"Organisieren und verfolgen Sie Ihre 3D-Druckprojekte",newProject:"Neues Projekt",editProject:"Projekt bearbeiten",deleteProject:"Projekt löschen",projectName:"Projektname",description:"Beschreibung",noProjects:"Noch keine Projekte",noProjectsFiltered:"Keine {{status}} Projekte",noProjectsFilteredHelp:"Sie haben keine {{status}} Projekte. Projekte werden hier angezeigt, wenn sich ihr Status ändert.",createFirst:"Erstellen Sie Ihr erstes Projekt, um verwandte Drucke zu organisieren, den Fortschritt zu verfolgen und Ihre Builds zu verwalten.",createFirstButton:"Erstes Projekt erstellen",create:"Erstellen",files:"Dateien",prints:"Drucke",plates:"Platten",parts:"Teile",lastModified:"Zuletzt geändert",deleteConfirm:"Möchten Sie dieses Projekt wirklich löschen? Archive und Warteschlangenelemente werden getrennt, aber nicht gelöscht.",addFiles:"Dateien hinzufügen",removeFile:"Datei entfernen",viewDetails:"Details anzeigen",namePlaceholder:"z.B. Voron 2.4 Build",descriptionPlaceholder:"Optionale Beschreibung...",color:"Farbe",targetPlates:"Ziel-Platten",targetPlatesPlaceholder:"z.B. 25",targetPlatesHelp:"Anzahl der Druckaufträge",targetParts:"Ziel-Teile",targetPartsPlaceholder:"z.B. 150",targetPartsHelp:"Benötigte Objekte insgesamt",tagsLabel:"Tags (kommagetrennt)",tagsPlaceholder:"z.B. voron, funktional, geschenk",dueDate:"Fälligkeitsdatum",priority:"Priorität",priorityLow:"Niedrig",priorityNormal:"Normal",priorityHigh:"Hoch",priorityUrgent:"Dringend",statusActive:"Aktiv",statusCompleted:"Abgeschlossen",statusArchived:"Archiviert",done:"Fertig",completed:"abgeschlossen",failed:"fehlgeschlagen",inQueue:"in Warteschlange",noPrintsYet:"Noch keine Drucke",printJobs:"Druckaufträge (Platten)",partsPrinted:"Gedruckte Teile",failedParts:"Fehlgeschlagene Teile",import:"Importieren",export:"Exportieren",importProject:"Projekt importieren",exportAll:"Alle Projekte exportieren",loading:"Projekte werden geladen...",noEditPermission:"Sie haben keine Berechtigung, Projekte zu bearbeiten",noDeletePermission:"Sie haben keine Berechtigung, Projekte zu löschen",noCreatePermission:"Sie haben keine Berechtigung, Projekte zu erstellen",noImportPermission:"Sie haben keine Berechtigung, Projekte zu importieren",noExportPermission:"Sie haben keine Berechtigung, Projekte zu exportieren",toast:{created:"Projekt erstellt",updated:"Projekt aktualisiert",deleted:"Projekt gelöscht",imported:"Projekt importiert",multipleImported:"{{count}} Projekte importiert",importFailed:"Import fehlgeschlagen",exported:"Projekte exportiert (nur Metadaten)"}},projectDetail:{notFound:"Projekt nicht gefunden",backToProjects:"Zurück zu Projekten",export:"Exportieren",exportProject:"Projekt exportieren",noExportPermission:"Sie haben keine Berechtigung, Projekte zu exportieren",noEditPermission:"Sie haben keine Berechtigung, Projekte zu bearbeiten",partOf:"Teil von:",priorityLabel:"Priorität:",noPrints:"Noch keine Drucke in diesem Projekt",status:{active:"Aktiv",completed:"Abgeschlossen",archived:"Archiviert"},priority:{low:"Niedrig",normal:"Normal",high:"Hoch",urgent:"Dringend"},dueDate:{overdue:"Überfällig",today:"Heute fällig",daysLeft:"{{count}} Tage übrig"},progress:{platesProgress:"Platten-Fortschritt",partsProgress:"Teile-Fortschritt",printJobs:"Druckaufträge",parts:"Teile",percentComplete:"{{percent}}% abgeschlossen",remaining:"{{count}} verbleibend"},stats:{printJobs:"Druckaufträge",total:"gesamt",failed:"{{count}} fehlgeschlagen",partsPrinted:"{{count}} Teile gedruckt",printTime:"Druckzeit",filamentUsed:"Filament verbraucht"},cost:{title:"Kostenverfolgung",filamentCost:"Filamentkosten",energy:"Energie",totalCost:"Gesamtkosten",total:"Gesamt",includesBom:"inkl. Stückliste",budget:"Budget",remaining:"Verbleibend"},subProjects:{title:"Unterprojekte ({{count}})"},notes:{title:"Notizen",noEditPermission:"Sie haben keine Berechtigung, Notizen zu bearbeiten",placeholder:"Notizen zu diesem Projekt hinzufügen...",empty:"Noch keine Notizen. Klicken Sie auf Bearbeiten, um Notizen hinzuzufügen."},files:{title:"Dateien",linkFolders:"Ordner aus dem Dateimanager verknüpfen",forQuickAccess:"für schnellen Zugriff auf dieses Projekt.",fileCount:"{{count}} Datei(en)",empty:"Keine Ordner verknüpft. Gehen Sie zum Dateimanager und verknüpfen Sie einen Ordner mit diesem Projekt.",noFiles:"Keine Dateien in diesem Ordner.",print:"Jetzt drucken",addToQueue:"Zur Warteschlange"},bom:{title:"Stückliste",acquired:"{{completed}}/{{total}} beschafft",showAll:"Alle anzeigen",hideDone:"Erledigte ausblenden",addPart:"Teil hinzufügen",noAddPermission:"Sie haben keine Berechtigung, Teile hinzuzufügen",partNamePlaceholder:"Teilename (z.B. M3x8 Schrauben)",partName:"Teilename",qty:"Menge",price:"Preis ({{currency}})",sourcingUrlPlaceholder:"Bezugsquelle-URL (optional)",remarksPlaceholder:"Bemerkungen (optional)",deletePart:"Teil löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',noUpdatePermission:"Sie haben keine Berechtigung, Teile zu aktualisieren",noEditPermission:"Sie haben keine Berechtigung, Teile zu bearbeiten",noDeletePermission:"Sie haben keine Berechtigung, Teile zu löschen",totalCost:"Gesamtkosten:",empty:"Keine Teile in der Stückliste. Fügen Sie Hardware, Elektronik oder andere Komponenten hinzu, um zu verfolgen, was beschafft werden muss."},timeline:{title:"Aktivitätsverlauf",empty:"Noch keine Aktivität."},template:{saveAsTemplate:"Als Vorlage speichern",noCreatePermission:"Sie haben keine Berechtigung, Vorlagen zu erstellen"},queue:{title:"Warteschlange",viewAll:"Alle anzeigen",printing:"{{count}} druckend",queued:"{{count}} in Warteschlange"},prints:{title:"Drucke ({{count}})"},toast:{projectUpdated:"Projekt aktualisiert",partAdded:"Teil hinzugefügt",partRemoved:"Teil entfernt",exportFailed:"Export fehlgeschlagen",projectExported:"Projekt exportiert",templateCreated:"Vorlage erstellt"}},system:{title:"Systeminformationen",version:"Version",uptime:"Laufzeit",cpuUsage:"CPU-Auslastung",memoryUsage:"Speicherauslastung",diskUsage:"Festplattenauslastung",networkInfo:"Netzwerkinformationen",logs:"Protokolle",debugMode:"Debug-Modus",enableDebug:"Debug-Protokollierung aktivieren",disableDebug:"Debug-Protokollierung deaktivieren",downloadLogs:"Protokolle herunterladen",clearLogs:"Protokolle löschen",dockerInfo:"Docker-Info",containerName:"Container-Name",imageName:"Image-Name",platform:"Plattform",architecture:"Architektur"},library:{title:"Filament-Bibliothek",addFilament:"Filament hinzufügen",editFilament:"Filament bearbeiten",deleteFilament:"Filament löschen",vendor:"Hersteller",material:"Material",color:"Farbe",kFactor:"K-Faktor",temperature:"Temperatur",noFilaments:"Keine Filamente in der Bibliothek",deleteConfirm:"Möchten Sie dieses Filament wirklich löschen?",importFromPrinter:"Vom Drucker importieren",exportToFile:"In Datei exportieren"},spoolman:{title:"Spoolman-Integration",enabled:"Spoolman aktiviert",url:"Spoolman URL",connected:"Verbunden",disconnected:"Nicht verbunden",testConnection:"Verbindung testen",sync:"Synchronisieren",syncing:"Synchronisiert...",lastSync:"Letzte Synchronisierung",linkToSpoolman:"Mit Spoolman verknüpfen",openInSpoolman:"In Spoolman öffnen",unlinkSpool:"Spule trennen",unlinkConfirmTitle:"Spule entkoppeln?",unlinkConfirmMessage:"Dadurch wird die Spule von Spoolman getrennt. Die Spulendaten in Spoolman bleiben unverändert.",selectSpool:"Spule auswählen",noUnlinkedSpools:"Keine nicht verknüpften Spulen verfügbar",linkSuccess:"Spule erfolgreich mit Spoolman verknüpft",linkFailed:"Verknüpfung mit Spoolman fehlgeschlagen",unlinkSuccess:"Spule erfolgreich von Spoolman getrennt",unlinkFailed:"Trennen der Spule von Spoolman fehlgeschlagen",spoolId:"Spulen-ID",fillSourceLabel:"(Spoolman)",weight:"Gewicht",remaining:"Verbleibend",disableWeightSync:"AMS-Gewichtsschätzung deaktivieren",disableWeightSyncDesc:"Verbleibende Kapazität nicht aus AMS-Schätzungen aktualisieren. Verwenden Sie dies, wenn Sie die Verbrauchserfassung von Spoolman gegenüber den prozentualen AMS-Schätzungen bevorzugen. Neue Spulen verwenden weiterhin die AMS-Schätzung als Anfangsgewicht.",reportPartialUsage:"Teilverbrauch bei fehlgeschlagenen Drucken melden",reportPartialUsageDesc:"Wenn ein Druck fehlschlägt oder abgebrochen wird, den geschätzten Filamentverbrauch bis zu diesem Zeitpunkt basierend auf dem Schichtfortschritt melden."},inventory:{title:"Spulen-Inventar",addSpool:"Spule hinzufügen",editSpool:"Spule bearbeiten",material:"Material",selectMaterial:"Material auswählen...",subtype:"Untertyp",brand:"Marke",searchBrand:"Marke suchen...",useCustomBrand:'"{{brand}}" verwenden',useCustomMaterial:"Benutzerdefiniertes Material verwenden: {{material}}",colorName:"Farbname",colorNamePlaceholder:"Jade White, Fire Red...",color:"Farbe",hexColor:"Hex-Farbe",pickColor:"Benutzerdefinierte Farbe wählen",labelWeight:"Nenngewicht",coreWeight:"Leergewicht der Spule",searchSpoolWeight:"Spulengewicht suchen...",weightUsed:"Verbraucht",currentWeight:"Restgewicht",measuredWeight:"Gemessenes Gewicht",spoolName:"Spule",costPerKg:"Kosten pro kg",measuredWeightError:"Das gemessene Gewicht muss zwischen {{min}}g und {{max}}g liegen.",slicerFilament:"Slicer-Filament",slicerFilamentName:"Slicer-Preset-Name",slicerPreset:"Slicer-Preset",searchPresets:"Filament-Presets suchen...",selectedPreset:"Ausgewählt",noPresetsFound:"Keine Presets gefunden",tempOverrides:"Temperatur-Überschreibungen",note:"Notiz",notePlaceholder:"Zusätzliche Notizen zu dieser Spule...",archive:"Archivieren",restore:"Wiederherstellen",noSpools:"Noch keine Spulen. Fügen Sie Ihre erste Spule hinzu.",noManualSpools:"Keine manuell hinzugefügten Spulen verfügbar. Fügen Sie zuerst eine Spule zum Inventar hinzu.",kProfiles:"K-Profile",addKProfile:"K-Profil hinzufügen",assignSpool:"Spule zuweisen",unassignSpool:"Zuweisung aufheben",assignSuccess:"Spule zugewiesen und AMS-Slot konfiguriert",assignFailed:"Spulenzuweisung fehlgeschlagen",selectSpool:"Wählen Sie eine Spule für diesen Slot",assigned:"Zugewiesen",assigning:"Wird zugewiesen...",searchSpools:"Spulen suchen...",showAllSpools:"Alle Spulen anzeigen",allMaterials:"Alle Materialien",filterByBrand:"Nach Marke filtern...",showArchived:"Archivierte anzeigen",quickAdd:"Schnellerfassung (Lager)",quantity:"Menge",stock:"Lager",configured:"Konfiguriert",spoolsCreated:"{{count}} Spulen erstellt",spoolCreated:"Spule erstellt",spoolUpdated:"Spule aktualisiert",spoolDeleted:"Spule gelöscht",spoolArchived:"Spule archiviert",spoolRestored:"Spule wiederhergestellt",deleteConfirm:"Möchten Sie diese Spule wirklich löschen? Dies kann nicht rückgängig gemacht werden.",archiveConfirm:"Möchten Sie diese Spule wirklich archivieren?",advancedSettings:"Erweiterte Einstellungen",filamentInfoTab:"Filament-Info",paProfileTab:"PA-Profil",filamentInfo:"Filament",additional:"Zusätzlich",loadingPresets:"Cloud-Presets werden geladen...",cloudConnected:"Cloud verbunden",cloudNotConnected:"Cloud nicht verbunden (Standardwerte)",recentColors:"Zuletzt",searchColors:"Farben suchen...",searchResults:"Suchergebnisse",allColors:"Alle Farben",commonColors:"Häufige Farben",showLess:"Weniger",showAll:"Alle",noColorsFound:"Keine Farben gefunden",noResults:"Keine Ergebnisse",selectMaterialFirst:"Bitte zuerst ein Material im Filament-Info Tab auswählen.",noPrintersConfigured:"Keine Drucker konfiguriert. Fügen Sie Drucker hinzu.",matchingFilter:"Filter",anyBrand:"Jede Marke",anyVariant:"Jede Variante",autoSelect:"Auto-Auswahl",matches:"Treffer",match:"Treffer",noMatches:"Keine Treffer",connected:"Verbunden",offline:"Offline",printerOffline:"Drucker ist offline. Verbinden Sie ihn, um Kalibrierungsprofile anzuzeigen.",noKProfilesMatch:"Keine K-Profile stimmen mit dem gewählten Filament überein.",leftNozzle:"Linke Düse",rightNozzle:"Rechte Düse",profilesSelected:"Kalibrierungsprofil(e) ausgewählt",totalInventory:"Gesamtbestand",totalConsumed:"Gesamtverbrauch",byMaterial:"Nach Material",inPrinter:"Im Drucker",lowStock:"Niedriger Bestand",sinceTracking:"Seit Beginn der Erfassung",loadedInAms:"Im AMS/Ext geladen",remaining:"Verbleibend",weightCheck:"Gewichtskontrolle",lastWeighed:"Zuletzt gewogen",neverWeighed:"Nie gewogen",search:"Spulen suchen...",showing:"Zeige",to:"bis",of:"von",show:"Zeige",spools:"Spulen",spool:"Spule",page:"Seite",noSpoolsMatch:"Keine Ergebnisse",noSpoolsMatchDesc:"Versuchen Sie, Ihre Suche oder Filter anzupassen.",active:"Aktiv",archived:"Archiviert",all:"Alle",used:"Verwendet",new:"Neu",clearFilters:"Filter löschen",table:"Tabelle",cards:"Karten",net:"Netto",groupSimilar:"Gruppieren",groupedSpools:"{{count}} identische Spulen",groupedRows:"Zeilen",columns:"Spalten",configureColumns:"Spalten konfigurieren",configureColumnsDesc:"Ziehen zum Neuordnen oder Pfeile verwenden. Sichtbarkeit mit dem Augensymbol umschalten.",visible:"sichtbar",reset:"Zurücksetzen",cancel:"Abbrechen",applyChanges:"Änderungen anwenden",moveUp:"Nach oben",moveDown:"Nach unten",hideColumn:"Spalte ausblenden",showColumn:"Spalte einblenden",linkToSpool:"Mit Spule verknüpfen",tagLinked:"Tag mit Spule verknüpft",tagLinkFailed:"Tag-Verknüpfung fehlgeschlagen",tagAlreadyLinked:"Tag bereits mit anderer Spule verknüpft",unknownTag:"Unbekannter RFID-Tag erkannt",usageHistory:"Verbrauchshistorie",noUsageHistory:"Noch kein Verbrauch erfasst",printName:"Druckname",weightConsumed:"Verbrauchtes Gewicht",clearHistory:"Löschen",historyCleared:"Verbrauchshistorie gelöscht",fillSourceLabel:"(Inv)",lowStockThresholdError:"Der Schwellenwert muss zwischen 0.1 und 99.9 liegen",assignMismatchTitle:"Material stimmt nicht überein",assignMismatchMessage:'Das ausgewählte Spulenmaterial "{{spoolMaterial}}" stimmt nicht mit dem Tray-Material "{{trayMaterial}}" für {{location}} überein. Trotzdem zuweisen?',assignMismatchConfirm:"Trotzdem zuweisen",assignPartialMismatchMessage:'Das Spulenmaterial "{{spoolMaterial}}" ist ähnlich, stimmt aber nicht genau mit "{{trayMaterial}}" in {{location}} überein. Möchten Sie fortfahren?',assignProfileMismatchMessage:'Das Spulenprofil "{{spoolProfile}}" stimmt nicht mit dem Fachprofil "{{trayProfile}}" in {{location}} überein. Möchten Sie fortfahren?'},timelapse:{title:"Zeitraffer",create:"Zeitraffer erstellen",download:"Herunterladen",delete:"Löschen",preview:"Vorschau",frameRate:"Bildrate",quality:"Qualität",processing:"Wird verarbeitet...",noTimelapses:"Keine Zeitraffer verfügbar"},ams:{title:"AMS",slot:"Slot",empty:"Leer",emptySlot:"Leerer Slot",unknown:"Unbekannt",humidity:"Luftfeuchtigkeit",temperature:"Temperatur",filamentType:"Filamenttyp",filamentColor:"Farbe",remaining:"Verbleibend",history:"AMS-Verlauf",noHistory:"Kein Verlauf verfügbar",configureSlot:"Slot konfigurieren",externalSpool:"Externe Spule",profile:"Profil",kFactor:"K-Faktor",fill:"Füllstand",configure:"Konfigurieren",used:"verwendet",remainingUnit:"verbleibend"},printModal:{title:"Druck starten",selectPrinter:"Drucker auswählen",selectPlate:"Platte auswählen",filamentMapping:"Filamentzuordnung",totalCost:"Gesamtkosten:",slotRemainingShort:" - {{grams}}g übrig",printSettings:"Druckeinstellungen",bedLeveling:"Bett-Nivellierung",flowCalibration:"Fluss-Kalibrierung",vibrationCalibration:"Vibrations-Kalibrierung",layerInspection:"Erste-Schicht-Prüfung",timelapse:"Zeitraffer",startPrint:"Druck starten",addToQueue:"Zur Warteschlange hinzufügen",cancel:"Abbrechen",noPrintersAvailable:"Keine Drucker verfügbar",printerBusy:"Drucker ist beschäftigt",printerOffline:"Drucker ist offline",sameTypeDifferentColor:"Gleicher Typ, andere Farbe",filamentTypeNotLoaded:"Filamenttyp nicht geladen",openCalendar:"Kalender öffnen",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Linke Düse",rightNozzleTooltip:"Rechte Düse",filamentOverride:"Filament-Überschreibung",filamentOverrideHint:"Filamente für modellbasierte Zuweisung optional überschreiben. Der Planer wird gegen die ausgewählten Filamente statt der ursprünglichen 3MF-Werte abgleichen.",originalFilament:"Original",overrideWith:"Ersetzen mit",resetToOriginal:"Auf Original zurücksetzen",insufficientFilamentTitle:"Nicht genug Filament",insufficientFilamentMessage:"Einige zugewiesene Spulen haben weniger Filament als dieser Druck benötigt:",insufficientFilamentLine:"{{printer}} - {{slot}}: benötigt {{required}}g, verbleibend {{remaining}}g",printAnyway:"Trotzdem drucken",forceColorMatch:"Farbe erzwingen",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Gestaffelt an {{count}} Drucker senden",gcodeInjection:"Auto-Print G-code einfügen"},backup:{title:"Sichern & Wiederherstellen",createBackup:"Sicherung erstellen",restoreBackup:"Sicherung wiederherstellen",restoreDescription:"Alle Daten aus einer Sicherungsdatei ersetzen",downloadBackup:"Sicherung herunterladen",uploadBackup:"Sicherung hochladen",lastBackup:"Letzte Sicherung",autoBackup:"Automatische Sicherung",backupNow:"Jetzt sichern",restoreWarning:"Warnung: Das Wiederherstellen einer Sicherung überschreibt alle aktuellen Daten.",includeArchives:"Archive einschließen",includeSettings:"Einstellungen einschließen",includeProfiles:"Profile einschließen",backupSuccess:"Sicherung erfolgreich erstellt",restoreSuccess:"Sicherung erfolgreich wiederhergestellt",backupFailed:"Sicherung fehlgeschlagen",restoreFailed:"Wiederherstellung fehlgeschlagen",restoreNote:"Virtueller Drucker wird während der Wiederherstellung gestoppt",githubBackup:"GitHub Backup",enabled:"Aktiviert",cloudLoginRequired:"Bambu Cloud Login erforderlich. Melden Sie sich unter Profile → Cloud-Profile an, um GitHub-Backup zu aktivieren.",cloudLoginRequiredShort:"Cloud-Login erforderlich",githubDescription:"Synchronisieren Sie Ihre Profile automatisch mit einem privaten GitHub-Repository für Backup und Versionsverlauf.",repositoryUrl:"Repository-URL",personalAccessToken:"Persönlicher Zugriffstoken",tokenSaved:"(gespeichert)",enterNewToken:"Neuen Token eingeben zum Aktualisieren",tokenHint:"Feingranularer Token mit Lese-/Schreibberechtigung für Inhalte",branch:"Branch",manualOnly:"Nur manuell",hourly:"Stündlich",daily:"Täglich",weekly:"Wöchentlich",includeInBackup:"In Sicherung einschließen",kProfiles:"K-Profile",kProfilesDescription:"Druckvorschub-Kalibrierung von verbundenen Druckern",noPrintersConnected:"Keine Drucker verbunden",printersConnected:"{{connected}}/{{total}} verbunden",cloudProfiles:"Cloud-Profile",cloudProfilesDescription:"Filament-, Drucker- und Prozessprofile aus der Bambu Cloud",appSettings:"App-Einstellungen",appSettingsDescription:"Bambuddy-Konfiguration (komplette Datenbank)",spoolInventory:"Spulenbestand",spoolInventoryDescription:"Filamentspulen, Nutzungsverlauf und Kostenverfolgung",printArchives:"Druckarchive",printArchivesDescription:"Druckverlauf-Metadaten (keine GCode/3MF-Dateien)",lastBackupAt:"Letzte Sicherung:",noBackupsYet:"Noch keine Sicherungen",next:"Nächste:",startingBackup:"Sicherung wird gestartet...",test:"Test",enableBackup:"Sicherung aktivieren",testConnection:"Verbindung testen",enterRepoUrl:"Repository-URL eingeben",enterRepoAndToken:"Repository-URL und Zugriffstoken eingeben",repoRequired:"Repository-URL ist erforderlich",tokenRequired:"Zugriffstoken ist erforderlich",githubBackupEnabled:"GitHub-Backup aktiviert",tokenUpdated:"Token aktualisiert",settingsSaved:"Einstellungen gespeichert",failedToSave:"Speichern fehlgeschlagen: {{message}}",backupCompleteFiles:"Sicherung abgeschlossen - {{count}} Dateien aktualisiert",backupSkippedNoChanges:"Sicherung übersprungen - keine Änderungen",backupFailed2:"Sicherung fehlgeschlagen: {{message}}",clearedLogs:"{{count}} Protokolle gelöscht",failedToClearLogs:"Protokolle löschen fehlgeschlagen: {{message}}",history:"Verlauf",clear:"Löschen",date:"Datum",status:"Status",commit:"Commit",localBackup:"Lokale Sicherung",localBackupDescription:"Erstellen Sie eine vollständige Sicherung Ihrer Bambuddy-Daten einschließlich Datenbank, Archive, Uploads und aller Dateien.",downloadBackupLabel:"Sicherung herunterladen",completeBackupZip:"Vollständige Sicherung: Datenbank + alle Dateien (ZIP)",download:"Herunterladen",preparingBackup:"Sicherung wird vorbereitet...",creatingArchive:"Sicherungsarchiv wird erstellt... Dies kann bei großen Archiven eine Weile dauern.",downloadingFile:"Sicherungsdatei wird heruntergeladen...",backupDownloaded:"Sicherung erfolgreich heruntergeladen",failedToCreateBackup:"Sicherung erstellen fehlgeschlagen: {{message}}",restore:"Wiederherstellen",restoreReplacesAll:"Wiederherstellung ersetzt alle Daten.",restoreReplacesAllDetail:"Ihre aktuelle Datenbank und Dateien werden vollständig ersetzt. Nach der Wiederherstellung ist ein Neustart erforderlich.",restoreConfirmTitle:"Sicherung wiederherstellen",restoreConfirmMessage:'Sind Sie sicher, dass Sie von "{{filename}}" wiederherstellen möchten? Dies ersetzt Ihre aktuelle Datenbank und alle Dateien vollständig. Die Anwendung muss nach der Wiederherstellung neu gestartet werden.',restoreConfirmButton:"Sicherung wiederherstellen",uploadingFile:"Sicherungsdatei wird hochgeladen...",backupRestoredRestart:"Sicherung wiederhergestellt. Bitte starten Sie Bambuddy neu.",failedToRestore:"Sicherung wiederherstellen fehlgeschlagen. Bitte überprüfen Sie das Dateiformat.",reloadNow:"Jetzt neu laden",creatingBackup:"Sicherung erstellen",restoringBackup:"Sicherung wiederherstellen",preparing:"Vorbereiten...",processing:"Verarbeiten...",doNotClosePage:"Bitte schließen Sie diese Seite nicht und navigieren Sie nicht weg. Dieser Vorgang kann bei großen Sicherungen mehrere Minuten dauern.",restoring:"Wiederherstellen...",restoreComplete:"Wiederherstellung abgeschlossen",restoreFailed2:"Wiederherstellung fehlgeschlagen",importSettings:"Einstellungen aus einer Sicherungsdatei importieren",pleaseWaitRestoring:"Bitte warten Sie, während Ihre Daten wiederhergestellt werden",selectBackupFile:"Klicken Sie, um eine Sicherungsdatei auszuwählen (.json oder .zip)",duplicateHandling:"So funktioniert die Duplikatbehandlung:",matchPrinters:"Drucker",matchPrintersBy:"abgeglichen nach Seriennummer",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"abgeglichen nach IP-Adresse",matchNotificationProviders:"Benachrichtigungsanbieter",matchNotificationProvidersBy:"abgeglichen nach Name",matchFilaments:"Filamente",matchFilamentsBy:"abgeglichen nach Name + Typ + Marke",matchArchives:"Archive",matchArchivesBy:"abgeglichen nach Inhaltshash (immer übersprungen)",matchPendingUploads:"Ausstehende Uploads",matchPendingUploadsBy:"abgeglichen nach Dateiname",matchSettingsTemplates:"Einstellungen & Vorlagen",matchSettingsTemplatesBy:"immer überschrieben",replaceExisting:"Vorhandene Daten ersetzen",keepExisting:"Vorhandene Daten behalten",overwriteDescription:"Bereits vorhandene Elemente mit Sicherungsdaten überschreiben",keepDescription:"Nur Elemente wiederherstellen, die noch nicht vorhanden sind",overwriteCaution:"Achtung:",overwriteWarning:"Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Daten aus der Sicherung. Drucker-Zugangscodes werden aus Sicherheitsgründen nie überschrieben.",cancel:"Abbrechen",processingBackup:"Sicherungsdatei wird verarbeitet...",itemsRestored:"Wiederhergestellt",itemsSkipped:"Übersprungen",restored:"Wiederhergestellt",skippedAlreadyExist:"Übersprungen (bereits vorhanden)",filesCategory:"Dateien (3MF, Thumbnails, etc.)",andMore:"...und {{count}} weitere",newApiKeysGenerated:"Neue API-Schlüssel generiert",keysShownOnce:"Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!",copy:"Kopieren",noDataFound:"In der Sicherungsdatei wurden keine Daten zur Wiederherstellung gefunden.",close:"Schließen",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Einstellungen",notification_providers:"Benachrichtigungsanbieter",notification_templates:"Benachrichtigungsvorlagen",smart_plugs:"Smart Plugs",printers:"Drucker",filaments:"Filamente",maintenance_types:"Wartungstypen",archives:"Archive",projects:"Projekte",pending_uploads:"Ausstehende Uploads",external_links:"Externe Links",api_keys:"API-Schlüssel"}},tags:{title:"Tags",addTag:"Tag hinzufügen",editTag:"Tag bearbeiten",deleteTag:"Tag löschen",tagName:"Tag-Name",tagColor:"Tag-Farbe",noTags:"Keine Tags",deleteConfirm:"Möchten Sie diesen Tag wirklich löschen?",manageTags:"Tags verwalten"},uploadModal:{title:"3MF-Dateien hochladen",dragDrop:"3MF-Dateien hierher ziehen",or:"oder",browseFiles:"Dateien durchsuchen",extractionInfo:"Das Druckermodell wird automatisch aus den 3MF-Datei-Metadaten extrahiert.",uploaded:"hochgeladen",failed:"fehlgeschlagen",uploading:"Wird hochgeladen...",upload:"Hochladen",uploadFailed:"Hochladen fehlgeschlagen"},editArchive:{title:"Archiv bearbeiten",name:"Name",namePlaceholder:"Druckname",printer:"Drucker",noPrinter:"Kein Drucker",project:"Projekt",noProject:"Kein Projekt",itemsPrinted:"Gedruckte Teile",itemsPrintedHelp:"Anzahl der in diesem Druckauftrag produzierten Teile",notes:"Notizen",notesPlaceholder:"Notizen zu diesem Druck hinzufügen...",externalLink:"Externer Link",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link zu Printables, Thingiverse oder anderer Quelle",tags:"Tags",tagsPlaceholder:"Tags hinzufügen...",addMoreTags:"Weitere Tags hinzufügen...",matchingTags:'Übereinstimmend mit "{{query}}"',existingTags:"Vorhandene Tags",clickToAdd:"(zum Hinzufügen klicken)",status:"Status",failureReason:"Fehlergrund",selectReason:"Grund auswählen...",photos:"Fotos des Druckergebnisses",photosHelp:"Klicken Sie auf + um Fotos Ihres Druckergebnisses hinzuzufügen",printResult:"Druckergebnis",saving:"Wird gespeichert...",failureReasons:{adhesionFailure:"Haftungsfehler",spaghettiDetached:"Spaghetti / Abgelöst",layerShift:"Schichtversatz",cloggedNozzle:"Verstopfte Düse",filamentRunout:"Filament aufgebraucht",warping:"Verformung",stringing:"Fadenziehen",underExtrusion:"Unterextrusion",powerFailure:"Stromausfall",userCancelled:"Vom Benutzer abgebrochen",other:"Sonstiges"},statuses:{completed:"Abgeschlossen",failed:"Fehlgeschlagen",aborted:"Abgebrochen",printing:"Druckt"}},kProfiles:{title:"K-Profile",noPrintersConfigured:"Keine Drucker konfiguriert",addPrinterInSettings:"Fügen Sie einen Drucker in den Einstellungen hinzu, um K-Profile zu verwalten",noActivePrinters:"Keine aktiven Drucker",enablePrinterConnection:"Aktivieren Sie eine Druckerverbindung, um K-Profile anzuzeigen",loadingProfiles:"Lade K-Profile...",printerOffline:"Drucker offline",printerOfflineDesc:"Der ausgewählte Drucker ist nicht verbunden. Schalten Sie ihn ein, um K-Profile anzuzeigen.",noMatchingProfiles:"Keine passenden Profile",noMatchingProfilesDesc:"Keine Profile entsprechen Ihren Suchkriterien",noKProfiles:"Keine K-Profile",noKProfilesDesc:"Keine Druckvorschub-Profile für {{diameter}}mm Düse gefunden",createFirstProfile:"Erstes Profil erstellen",printer:"Drucker",nozzle:"Düse",refresh:"Aktualisieren",addProfile:"Profil hinzufügen",export:"Exportieren",import:"Importieren",select:"Auswählen",selectAll:"Alle auswählen",delete:"Löschen",searchPlaceholder:"Nach Name oder Filament suchen...",allExtruders:"Alle Extruder",leftOnly:"Nur links",rightOnly:"Nur rechts",allFlow:"Alle Flusstypen",hfOnly:"Nur HF",sOnly:"Nur S",sortName:"Sortieren: Name",sortKValue:"Sortieren: K-Wert",sortFilament:"Sortieren: Filament",leftExtruder:"Linker Extruder",rightExtruder:"Rechter Extruder",modal:{addTitle:"K-Profil hinzufügen",editTitle:"K-Profil bearbeiten",profileName:"Profilname",profileNamePlaceholder:"Mein PLA-Profil",kValue:"K-Wert",kValuePlaceholder:"0,020",kValueHelp:"Typischer Bereich: 0,01 - 0,06 für PLA, 0,02 - 0,10 für PETG",filament:"Filament",selectFilament:"Filament auswählen...",noFilamentsHelp:"Keine Filamente gefunden. Erstellen Sie zuerst ein K-Profil in Bambu Studio.",flowType:"Flusstyp",highFlow:"High Flow",standard:"Standard",nozzleSize:"Düsengröße",extruder:"Extruder",extruders:"Extruder",left:"Links",right:"Rechts",notes:"Notizen (lokal gespeichert)",notesPlaceholder:"Notizen zu diesem Profil hinzufügen...",notesHelp:"Notizen werden in Bambuddy gespeichert, nicht auf dem Drucker",syncing:"Synchronisiert mit Drucker...",savingExtruder:"Speichern auf Extruder {{current}}/{{total}}...",pleaseWait:"Bitte warten"},deleteConfirm:{title:"Profil löschen",cannotUndo:"Dies kann nicht rückgängig gemacht werden",message:'Möchten Sie "{{name}}" wirklich vom Drucker löschen?'},bulkDelete:{title:"Profile löschen",cannotUndo:"Dies kann nicht rückgängig gemacht werden",message:"Möchten Sie wirklich {{count}} ausgewählte Profile vom Drucker löschen?"},toast:{profileSaved:"K-Profil gespeichert",profilesSaved:"K-Profil auf {{count}} Extrudern gespeichert",selectAtLeastOneExtruder:"Bitte wählen Sie mindestens einen Extruder aus",profileDeleted:"K-Profil gelöscht",profilesDeleted:"{{count}} Profile gelöscht",exportedProfiles:"{{count}} Profile exportiert",importedProfiles:"{{count}} von {{total}} Profilen importiert",noProfilesToExport:"Keine Profile zum Exportieren",invalidFileFormat:"Ungültiges Dateiformat",failedToParseImport:"Import-Datei konnte nicht gelesen werden",failedToSaveBatch:"K-Profile konnten nicht gespeichert werden",noteSaved:"Notiz gespeichert",failedToSaveNote:"Notiz konnte nicht gespeichert werden"},permission:{noRead:"Sie haben keine Berechtigung, Profile zu aktualisieren",noCreate:"Sie haben keine Berechtigung, Profile hinzuzufügen",noUpdate:"Sie haben keine Berechtigung, K-Profile zu aktualisieren",noDelete:"Sie haben keine Berechtigung, K-Profile zu löschen",noExport:"Sie haben keine Berechtigung, Profile zu exportieren",noImport:"Sie haben keine Berechtigung, Profile zu importieren"}},virtualPrinter:{title:"Virtueller Drucker",running:"Läuft",stopped:"Gestoppt",description:{default:"Aktiviere einen virtuellen Drucker, der in Bambu Studio und OrcaSlicer erscheint. Dateien, die an diesen Drucker gesendet werden, werden direkt archiviert ohne zu drucken.",proxy:"Aktiviere einen Proxy, der Slicer-Datenverkehr an einen echten Drucker weiterleitet, um Ferndruck über jedes Netzwerk zu ermöglichen."},enable:{title:"Virtuellen Drucker aktivieren",visibleInSlicer:'Sichtbar als "Bambuddy" in der Slicer-Erkennung',proxyingTo:"Proxy zu {{name}}",notActive:"Nicht aktiv"},model:{title:"Druckermodell",description:"Wähle welches Druckermodell emuliert werden soll.",restartWarning:"Das Ändern des Modells startet den virtuellen Drucker neu"},accessCode:{title:"Zugangscode",isSet:"Zugangscode ist gesetzt",notSet:"Kein Zugangscode gesetzt - erforderlich zum Aktivieren",placeholder:"8-Zeichen-Code eingeben",placeholderChange:"Neuen Code eingeben zum Ändern",hint:"Muss genau 8 Zeichen lang sein. Wird von Slicern zur Authentifizierung verwendet.",charCount:"({{count}}/8)"},targetPrinter:{title:"Zieldrucker",configured:"Proxy-Ziel konfiguriert",notConfigured:"Kein Zieldrucker ausgewählt - erforderlich für Proxy-Modus",placeholder:"Drucker auswählen...",hint:"Wähle den Drucker aus, an den der Slicer-Datenverkehr weitergeleitet werden soll. Der Drucker muss im LAN-Modus sein.",noPrinters:"Keine Drucker konfiguriert. Füge zuerst einen Drucker hinzu, um den Proxy-Modus zu verwenden."},remoteInterface:{title:"Netzwerkschnittstelle überschreiben",configured:"Schnittstellenüberschreibung aktiv",optional:"Optional - verwenden wenn die automatisch erkannte IP falsch ist (z.B. mehrere NICs, Docker, VPN)",placeholder:"Automatisch erkennen (Standard)...",hint:"Überschreibt die per SSDP beworbene und im TLS-Zertifikat verwendete IP-Adresse. Nützlich wenn Bambuddy mehrere Netzwerkschnittstellen hat."},mode:{title:"Modus",archive:"Archivieren",archiveDesc:"Dateien sofort archivieren",review:"Überprüfen",reviewDesc:"Vor dem Archivieren überprüfen",queue:"Warteschlange",queueDesc:"Archivieren und zur Warteschlange hinzufügen",proxy:"Proxy",proxyDesc:"An echten Drucker weiterleiten"},autoDispatch:{title:"Automatisch starten",description:"Drucke automatisch starten, wenn sie zur Warteschlange hinzugefügt werden. Wenn deaktiviert, warten Drucke auf manuellen Start."},setupRequired:{title:"Einrichtung erforderlich",description:"Die virtuelle Druckerfunktion erfordert zusätzliche Systemkonfiguration, bevor sie funktioniert. Dies beinhaltet Portweiterleitung, Firewall-Regeln und plattformspezifische Einstellungen.",readGuide:"Lese die Einrichtungsanleitung vor dem Aktivieren"},howItWorks:{title:"So funktioniert es",step1:"Im selben LAN erscheinen virtuelle Drucker automatisch in deinem Slicer (Bambu Studio / OrcaSlicer). Aus anderen Netzwerken füge sie manuell per IP-Adresse und Zugangscode hinzu.",step2:'Im Archiv-, Überprüfungs- und Warteschlangen-Modus verwende die "Senden"-Funktion im Slicer, um 3MF-Dateien an Bambuddy zu senden. Der Slicer zeigt "Druck erfolgreich" — die Datei wird gespeichert, nicht gedruckt.',step3:"Im Proxy-Modus leitet der virtuelle Drucker den gesamten Datenverkehr an einen echten Drucker weiter — Drucke starten sofort wie bei einer direkten Verbindung."},status:{title:"Status-Details",printerName:"Druckername",model:"Modell",serialNumber:"Seriennummer",mode:"Modus",pendingFiles:"Ausstehende Dateien",targetPrinter:"Zieldrucker",ftpPort:"FTP-Port",mqttPort:"MQTT-Port",ftpConnections:"FTP-Verbindungen",mqttConnections:"MQTT-Verbindungen"},toast:{updated:"Virtuelle Druckereinstellungen aktualisiert",failedToUpdate:"Einstellungen konnten nicht aktualisiert werden",accessCodeRequired:"Bitte zuerst einen Zugangscode setzen",targetPrinterRequired:"Bitte zuerst einen Zieldrucker auswählen",bindIpRequired:"Bitte zuerst eine Bind-IP setzen",accessCodeEmpty:"Zugangscode darf nicht leer sein",accessCodeLength:"Zugangscode muss genau 8 Zeichen lang sein",created:"Virtueller Drucker erstellt",failedToCreate:"Virtueller Drucker konnte nicht erstellt werden",deleted:"Virtueller Drucker gelöscht",failedToDelete:"Virtueller Drucker konnte nicht gelöscht werden"},list:{title:"Virtuelle Drucker",add:"Hinzufügen",addFirst:"Virtuellen Drucker hinzufügen",empty:"Keine virtuellen Drucker konfiguriert. Fügen Sie einen hinzu, um zu beginnen."},bindIp:{title:"Bind-Interface",placeholder:"Interface auswählen...",hint:"Netzwerkinterface, an das dieser virtuelle Drucker gebunden wird. Muss pro Drucker eindeutig sein."},proxy:{accessCodeHint:"Im Proxy-Modus den Zugangscode des Zieldruckers im Slicer verwenden. Die Verbindung wird transparent zum echten Drucker weitergeleitet."},addDialog:{title:"Virtuellen Drucker hinzufügen",name:"Name",hint:"Sie können Zugangscode, Zieldrucker und andere Einstellungen nach dem Erstellen konfigurieren.",create:"Erstellen"},deleteConfirm:{title:"Virtuellen Drucker löschen",message:'Möchten Sie "{{name}}" wirklich löschen? Dies stoppt alle Dienste für diesen Drucker.'}},modelViewer:{openInSlicer:"Im Slicer öffnen",tabs:{model:"3D-Modell",gcode:"G-Code Vorschau"},notAvailable:"nicht verfügbar",notSliced:"nicht geslicet",plates:"Platten",allPlates:"Alle Platten",plateNumber:"Platte {{number}}",plateCount:"{{count}} Platte",plateCount_other:"{{count}} Platten",objectCount:"{{count}} Objekt",objectCount_other:"{{count}} Objekte",filamentCount:"{{count}} Filament",filamentCount_other:"{{count}} Filamente",eta:"ETA {{minutes}} Min",noPreview:"Keine Vorschau für diese Datei verfügbar",pagination:{pageOf:"Seite {{current}} von {{total}}",prev:"Zurück",next:"Weiter"},errors:{failedToLoad:"Datei konnte nicht geladen werden",noMeshes:"Keine Meshes in 3MF-Datei gefunden",unsupportedFormat:"Nicht unterstütztes Dateiformat"}},maintenanceDescriptions:{lubricateCarbonRods:"Schmiermittel auf Karbonstäbe für sanfte Bewegung auftragen",lubricateRails:"Schmiermittel auf Linearschienen für sanfte Bewegung auftragen",cleanNozzle:"Hotend und Düse reinigen, um Verstopfungen zu verhindern",checkBelts:"Riemenspannung für präzise Drucke überprüfen",cleanBuildPlate:"Druckplatte für bessere Haftung reinigen",checkExtruder:"Extruderzahnräder auf Verschleiß prüfen",checkCooling:"Sicherstellen, dass Lüfter ordnungsgemäß funktionieren",generalInspection:"Allgemeine Druckerinspektion",cleanCarbonRods:"Karbonstäbe reinigen, um Reibung zu reduzieren",lubricateSteelRods:"Schmiermittel auf Stahlstangen für sanfte Bewegung auftragen",cleanSteelRods:"Stahlstangen reinigen, um Reibung zu reduzieren",cleanLinearRails:"Linearschienen abwischen, um Staub und Schmutz zu entfernen",checkPtfeTube:"PTFE-Schlauch auf Verschleiß oder Beschädigung prüfen",replaceHepaFilter:"HEPA-Filter für Luftqualität ersetzen",replaceCarbonFilter:"Aktivkohlefilter ersetzen",lubricateLeftNozzleRail:"Linke Düsenschiene schmieren (H2-Serie)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Plug-Admin-Seite öffnen",deleteSmartPlug:"Smart Plug löschen",turnOnSmartPlug:"Smart Plug einschalten",turnOffSmartPlug:"Smart Plug ausschalten",turnOn:"Einschalten",turnOff:"Ausschalten",addSmartPlug:{scanningNetwork:"Netzwerk wird durchsucht...",chooseEntity:"Entität auswählen...",connectionFailed:"Verbindung fehlgeschlagen",searchEntities:"Entitäten suchen...",searchPowerSensors:"Leistungssensoren suchen...",searchEnergySensors:"Energiesensoren suchen...",placeholders:{plugName:"Wohnzimmer Steckdose",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Gleich wie Leistungs-Topic oder anders"}},linkedTo:"Verbunden mit:",monitorOnly:"Nur Überwachung",alerts:"Alarme",scheduleOn:"Ein {{time}}",scheduleOff:"Aus {{time}}",on:"Ein",off:"Aus",power:"Leistung",kwhToday:"kWh Heute",settings:"Einstellungen",automationSettings:"Automatisierungseinstellungen",showInSwitchbar:"In Schaltleiste anzeigen",quickAccessSidebar:"Schnellzugriff über Seitenleiste",enabled:"Aktiviert",enableAutomation:"Automatisierung für diesen Stecker aktivieren",autoOn:"Auto Ein",autoOnDescription:"Einschalten wenn Druck startet",autoOff:"Auto Aus",autoOffDescription:"Ausschalten wenn Druck abgeschlossen (einmalig)",autoOffPersistent:"Aktiviert lassen",autoOffPersistentDescription:"Zwischen Drucken aktiviert bleiben statt einmalig",turnOffDelayMode:"Ausschaltverzögerungsmodus",time:"Zeit",temp:"Temp",delayMinutes:"Verzögerung (Minuten)",tempThreshold:"Temperaturschwelle (°C)",tempThresholdDescription:"Schaltet aus wenn die Düse unter diese Temperatur abkühlt",edit:"Bearbeiten",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen? Dies kann nicht rückgängig gemacht werden.',turnOnConfirm:'Möchten Sie "{{name}}" wirklich einschalten?',turnOffConfirm:'Möchten Sie "{{name}}" wirklich ausschalten? Dies unterbricht die Stromversorgung des angeschlossenen Geräts.',failedToTurn:'{{name}}" konnte nicht {{action}} werden',unknown:"Unbekannt",addTitle:"Smart Plug hinzufügen",editTitle:"Smart Plug bearbeiten",stopScanning:"Suche beenden",discoverTasmota:"Tasmota Geräte suchen",foundDevices:"{{count}} Gerät(e) gefunden - zum Auswählen klicken:",noDevicesFound:"Keine Tasmota Geräte in Ihrem Netzwerk gefunden",haNotConfigured:"Home Assistant ist nicht konfiguriert. Einrichtung unter",haSettingsPath:"Einstellungen → Netzwerk → Home Assistant",selectEntity:"Entität auswählen *",ipAddress:"IP-Adresse *",nameLabel:"Name *",username:"Benutzername",password:"Passwort",authHint:"Leer lassen, wenn Ihr Tasmota-Gerät keine Authentifizierung benötigt",linkToPrinter:"Mit Drucker verbinden",noPrinter:"Kein Drucker (nur manuelle Steuerung)",linkingDescription:"Verknüpfung ermöglicht automatisches Ein-/Ausschalten bei Druckstart/-ende",powerAlerts:"Leistungsalarme",alertAbove:"Alarm wenn über (W)",alertBelow:"Alarm wenn unter (W)",alertDescription:"Benachrichtigung wenn der Stromverbrauch diese Schwellenwerte überschreitet. Leer lassen um diese Richtung zu deaktivieren.",dailySchedule:"Tagesplan",turnOnAt:"Einschalten um",turnOffAt:"Ausschalten um",scheduleDescription:"Den Stecker automatisch täglich zu diesen Zeiten ein-/ausschalten. Leer lassen um diese Aktion zu überspringen.",showOnPrinterCard:"Auf Druckerkarte anzeigen",displayOnPrinterCard:"Schaltfläche auf Druckerkarte anzeigen",connectedResult:"Verbunden!",deviceLabel:"Gerät: {{name}} - ",stateLabel:"Status: {{state}}",test:"Test",delete:"Löschen",save:"Speichern",add:"Hinzufügen",cancel:"Abbrechen",failedToStartScan:"Suche konnte nicht gestartet werden",nameRequired:"Name ist erforderlich",entityRequired:"Entität ist für Home Assistant Stecker erforderlich",mqttTopicRequired:"Mindestens ein MQTT-Topic muss für Leistung, Energie oder Statusüberwachung konfiguriert sein",loadingEntities:"Entitäten werden geladen...",loading:"Laden...",failedToLoadEntities:"Entitäten konnten nicht geladen werden: {{error}}",noEntitiesMatching:'Keine Entitäten gefunden die "{{search}}" entsprechen',noEntitiesAvailable:"Keine Entitäten verfügbar",searchingEntities:"Alle Entitäten durchsuchen ({{count}} gefunden)",showingEntities:"Zeige switch, light, input_boolean ({{count}} verfügbar)",energyMonitoringOptional:"Energieüberwachung (Optional)",energyMonitoringHint:"Sensoren suchen und auswählen, die Leistungs-/Energiedaten liefern.",powerSensorW:"Leistungssensor (W)",energyTodayKwh:"Energie Heute (kWh)",totalEnergyKwh:"Gesamtenergie (kWh)",noMatchingSensors:"Keine passenden Sensoren",none:"Keine",mqttNotConfigured:"MQTT-Broker nicht konfiguriert. Broker-Adresse einstellen unter",mqttSettingsPath:"Einstellungen → Netzwerk → MQTT-Veröffentlichung",mqttNotConfiguredSuffix:"(Sie müssen die Veröffentlichung nicht aktivieren, nur die Broker-Details ausfüllen).",mqttMonitorOnlyDescription:"MQTT-Stecker empfangen Leistungs-/Energiedaten über MQTT-Abonnement. Ein-/Ausschalten ist nicht verfügbar - verwenden Sie Ihren MQTT-Broker oder Ihr Home-Automation-System.",powerMonitoring:"Leistungsüberwachung",energyMonitoring:"Energieüberwachung",stateMonitoring:"Statusüberwachung",optional:"optional",topic:"Topic",jsonPath:"JSON-Pfad",multiplier:"Multiplikator",onValue:"EIN-Wert",mqttPowerHint:`JSON-Pfad extrahiert Wert aus JSON-Payload (z.B. "power_l1"). Leer lassen wenn Topic rohe numerische Werte sendet. @@ -27,13 +27,13 @@ Use multiplicador 0.001 para Wh→kWh, 1000 para MWh→kWh.`,mqttStateHint:`O ca Valor ON: a string exata que significa "ON". Deixe vazio para detecção automática (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"URL de potência",restPowerPath:"Power JSON Path",restPowerMultiplier:"Multiplicador de potência",restEnergyUrl:"URL de energia",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Multiplicador de energia",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"URL separada para dados de potência (usa a URL de status se vazio)",restEnergyUrlHint:"URL separada para dados de energia (usa a URL de status se vazio)",restEnergyHint:"Cada valor pode usar sua própria URL ou recorrer à URL de status. Use multiplicadores para conversão de unidades (ex: 0.001 para converter Wh em kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"Nenhum interruptor na barra",enableSwitchbarHint:'Ative "Mostrar na barra de interruptores" em Configurações > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notificações por e-mail SMTP",telegram:"Notificações via bot do Telegram",discord:"Enviar para canal do Discord via webhook",ntfy:"Notificações push gratuitas e auto-hospedáveis",pushover:"Notificações push simples e confiáveis",callmebot:"Notificações gratuitas via WhatsApp pelo CallMeBot",webhook:"POST HTTP genérico para qualquer URL",homeassistant:"Notificações persistentes no painel do Home Assistant"},lastSuccess:"Último: {{date}}",error:"Erro",printer:"Impressora:",allPrinters:"Todas as impressoras",sendTestNotification:"Enviar Notificação de Teste",eventSettings:"Configurações de Eventos",enabled:"Ativado",sendFromProvider:"Enviar notificações deste provedor",printEvents:"Eventos de Impressão",printerStatus:"Status da Impressora",amsAlarms:"Alarmes do AMS",amsHtAlarms:"Alarmes do AMS-HT",printQueue:"Fila de Impressão",start:"Início",plateCheck:"Verificação da Mesa",complete:"Concluído",failed:"Falhou",stopped:"Parado",progress:"Progresso",offline:"Offline",lowFilament:"Filamento Baixo",maintenance:"Manutenção",amsHumidity:"Umidade do AMS",amsTemp:"Temp. do AMS",amsHtHumidity:"Umidade do AMS-HT",amsHtTemp:"Temp. do AMS-HT",bedCooled:"Mesa Resfriada",firstLayer:"Primeira camada",quiet:"Silencioso",digest:"Resumo {{time}}",printStarted:"Impressão Iniciada",plateNotEmpty:"Mesa Não Vazia",plateNotEmptyDescription:"Objetos detectados antes da impressão",printCompleted:"Impressão Concluída",bedCooledLabel:"Mesa Resfriada",bedCooledDescription:"Mesa resfriou abaixo do limite após a impressão",firstLayerCompleteLabel:"Primeira camada concluída",firstLayerCompleteDescription:"Notificar com foto quando a primeira camada terminar",missingSpoolAssignmentLabel:"Atribuição de bobina ausente",missingSpoolAssignmentDescription:"Notificar quando a impressão iniciar e bandejas necessárias não tiverem bobina atribuída",printFailed:"Impressão Falhou",printStopped:"Impressão Parada",progressMilestones:"Marcos de Progresso",progressMilestonesDescription:"Notificar em 25%, 50%, 75%",printerOffline:"Impressora Offline",printerError:"Erro da Impressora",lowFilamentLabel:"Filamento Baixo",maintenanceDue:"Manutenção Necessária",maintenanceDueDescription:"Notificar quando manutenção for necessária",amsHumidityHigh:"Umidade Alta do AMS",amsHumidityHighDescription:"Umidade do AMS regular excede o limite",amsTemperatureHigh:"Temperatura Alta do AMS",amsTemperatureHighDescription:"Temperatura do AMS regular excede o limite",amsHtHumidityHigh:"Umidade Alta do AMS-HT",amsHtHumidityHighDescription:"Umidade do AMS-HT excede o limite",amsHtTemperatureHigh:"Temperatura Alta do AMS-HT",amsHtTemperatureHighDescription:"Temperatura do AMS-HT excede o limite",jobAdded:"Trabalho Adicionado",jobAddedDescription:"Trabalho adicionado à fila",jobAssigned:"Trabalho Atribuído",jobAssignedDescription:"Trabalho baseado em modelo atribuído à impressora",jobStarted:"Trabalho Iniciado",jobStartedDescription:"Trabalho da fila começou a imprimir",jobWaiting:"Trabalho Aguardando",jobWaitingDescription:"Trabalho aguardando filamento ou impressora",jobSkipped:"Trabalho Pulado",jobSkippedDescription:"Trabalho pulado (anterior falhou)",jobFailed:"Trabalho Falhou",jobFailedDescription:"Trabalho falhou ao iniciar",queueComplete:"Fila Concluída",queueCompleteDescription:"Todos os trabalhos da fila finalizados",quietHours:"Horário de Silêncio",noNotificationsDuring:"Sem notificações durante essas horas",editProviderToChangeQuietHours:"Edite o provedor para alterar o horário de silêncio",dailyDigest:"Resumo Diário",batchNotifications:"Agrupar notificações em um único resumo diário",sendAt:"Enviar às {{time}}",editProviderToChangeDigestTime:"Edite o provedor para alterar o horário do resumo",edit:"Editar",deleteProvider:"Excluir Provedor de Notificação",deleteConfirm:'Tem certeza que deseja excluir "{{name}}"? Isso não pode ser desfeito.',delete:"Excluir",addTitle:"Adicionar Provedor de Notificação",editTitle:"Editar Provedor de Notificação",nameLabel:"Nome *",namePlaceholder:"Minhas Notificações",providerTypeLabel:"Tipo de Provedor *",configuration:"Configuração",testConfiguration:"Testar Configuração",printerFilter:"Filtro de Impressora",onlyFromPrinter:"Enviar notificações apenas para eventos desta impressora",quietHoursDnd:"Horário de Silêncio (Não Perturbe)",quietStart:"Início",quietEnd:"Fim",dailyDigestLabel:"Resumo Diário",sendDigestAt:"Enviar resumo às",digestCollected:"Os eventos serão coletados e enviados como um único resumo neste horário",notificationEvents:"Eventos de Notificação",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(após conclusão da impressão)",cancel:"Cancelar",save:"Salvar",add:"Adicionar",nameRequired:"Nome é obrigatório",fieldRequired:"{{field}} é obrigatório",phoneNumber:"Número de Telefone",apiKey:"Chave da API",serverUrl:"URL do Servidor",topic:"Tópico",authToken:"Token de Autenticação",userKey:"Chave do Usuário",appToken:"Token do Aplicativo",priority:"Prioridade",botToken:"Token do Bot",chatId:"ID do Chat",smtpServer:"Servidor SMTP",smtpPort:"Porta SMTP",security:"Segurança",authentication:"Autenticação",username:"Usuário",password:"Senha",fromEmail:"E-mail de Origem",toEmail:"E-mail de Destino",webhookUrl:"URL do Webhook",payloadFormat:"Formato do Payload",authorization:"Autorização",titleFieldName:"Nome do Campo de Título",messageFieldName:"Nome do Campo de Mensagem",editTemplate:"Editar Modelo: {{name}}",titleLabel:"Título",bodyLabel:"Corpo",titlePlaceholder:"Título da notificação...",bodyPlaceholder:"Corpo da notificação...",availableVariables:"Variáveis Disponíveis",clickToInsert:"Clique para inserir na posição do cursor no corpo",livePreview:"Pré-visualização ao Vivo",hide:"Ocultar",show:"Mostrar",loadingPreview:"Carregando pré-visualização...",enterTemplateContent:"Insira o conteúdo do modelo para ver a pré-visualização",titlePreview:"Título:",bodyPreview:"Corpo:",resetToDefault:"Restaurar Padrão",titleRequired:"Título é obrigatório",bodyRequired:"Corpo é obrigatório",notificationLog:"Registro de Notificações",showFailedOnly:"Apenas falhas",last24Hours:"Últimas 24 horas",last7Days:"Últimos 7 dias",last30Days:"Últimos 30 dias",last90Days:"Últimos 90 dias",justNow:"Agora mesmo",noFailedNotifications:"Nenhuma notificação com falha",noNotificationsLogged:"Nenhuma notificação registrada",unknownProvider:"Provedor Desconhecido",logTitle:"Título",logMessage:"Mensagem",logError:"Erro",logProvider:"Provedor: {{type}}",logTime:"Hora: {{time}}",refresh:"Atualizar",clearOld:"Limpar Antigos",statsSummary:"Últimos {{days}} dias:",statsNotifications:"notificações",statsSent:"{{count}} enviadas",statsFailed:"{{count}} com falha",eventTypes:{print_start:"Impressão Iniciada",print_complete:"Impressão Concluída",print_failed:"Impressão Falhou",print_stopped:"Impressão Parada",print_progress:"Progresso",printer_offline:"Impressora Offline",printer_error:"Erro da Impressora",filament_low:"Filamento Baixo",maintenance_due:"Manutenção Necessária",test:"Teste"},userEmail:{title:"Notificações",emailNotifications:"Notificações por E-mail",emailNotificationsDesc:"Receba notificações por e-mail para seus próprios trabalhos de impressão. Os e-mails são enviados usando as configurações SMTP definidas na Autenticação Avançada.",sendingTo:"As notificações serão enviadas para",noEmailWarning:"Sua conta não tem um endereço de e-mail. Entre em contato com um administrador para adicionar um.",printJobNotifications:"Notificações de Trabalhos de Impressão",printJobNotificationsDesc:"Escolha quais eventos acionam notificações por e-mail para os trabalhos de impressão que você envia.",printJobStarts:"Início do Trabalho de Impressão",printJobStartsDesc:"Ser notificado quando seu trabalho de impressão começar.",printJobFinishes:"Conclusão do Trabalho de Impressão",printJobFinishesDesc:"Ser notificado quando seu trabalho de impressão concluir com sucesso.",printErrors:"Erros de Impressão",printErrorsDesc:"Ser notificado quando seu trabalho de impressão falhar ou encontrar um erro.",printJobStops:"Trabalho de Impressão Parado",printJobStopsDesc:"Ser notificado quando seu trabalho de impressão for cancelado ou parado.",saveSuccess:"Preferências de notificação salvas.",saveError:"Falha ao salvar preferências de notificação."}},richTextEditor:{bold:"Negrito",italic:"Itálico",underline:"Sublinhado",bulletList:"Lista com marcadores",numberedList:"Lista numerada",alignLeft:"Alinhar à esquerda",alignCenter:"Centralizar",alignRight:"Alinhar à direita",addLink:"Adicionar link",removeLink:"Remover link"},externalLinks:{noLinksConfigured:"Nenhum link externo configurado",deleteLink:"Excluir link",removeCustomIcon:"Remover ícone personalizado",openInNewTab:"Abrir em nova aba",placeholders:{linkName:"Meu Link"}},keyboardShortcuts:{title:"Atalhos de Teclado",navigation:"Navegação",archivesSection:"Arquivos",kProfilesSection:"K-Profiles",generalSection:"Geral",shortcuts:{goToPrinters:"Ir para Impressoras",goToArchives:"Ir para Arquivos",goToQueue:"Ir para Fila",goToStats:"Ir para Estatísticas",goToProfiles:"Ir para Perfis na Nuvem",goToSettings:"Ir para Configurações",focusSearch:"Focar na pesquisa",openUploadModal:"Abrir modal de upload",clearSelection:"Limpar seleção / desfocar input",contextMenu:"Menu de contexto nos cartões",refreshProfiles:"Atualizar perfis",newProfile:"Novo perfil",exitSelectionMode:"Sair do modo de seleção",showHelp:"Mostrar esta ajuda"},footer:"Pressione Esc ou clique fora para fechar"},notificationLog:{title:"Registro de Notificações",events:{printStarted:"Impressão Iniciada",printComplete:"Impressão Concluída",printFailed:"Impressão Falhou",printStopped:"Impressão Interrompida",progress:"Progresso",printerOffline:"Impressora Offline",printerError:"Erro na Impressora",lowFilament:"Filamento Baixo",maintenanceDue:"Manutenção Pendente",test:"Teste"},timeAgo:{justNow:"Agora mesmo",minutesAgo:"há {{minutes}} minutos",hoursAgo:"há {{hours}} horas"}},restoreBackup:{title:"Restaurar Backup",restoring:"Restaurando...",restoreComplete:"Restauração Concluída",restoreFailed:"Falha na Restauração",importSettings:"Importar configurações de um arquivo de backup",pleaseWait:"Aguarde enquanto seus dados estão sendo restaurados",clickToSelect:"Clique para selecionar o arquivo de backup (.json ou .zip)",howDuplicateHandling:"Como funciona o tratamento de duplicatas:",categories:{printers:"Impressoras",smartPlugs:"Tomadas Inteligentes",notificationProviders:"Provedores de Notificação",filaments:"Filamentos",archives:"Arquivos",pendingUploads:"Uploads Pendentes",settingsTemplates:"Configurações e Modelos"},matchingInfo:{printers:"correspondem pelo número de série",smartPlugs:"correspondem pelo endereço IP",notificationProviders:"correspondem pelo nome",filaments:"correspondem pelo nome + tipo + marca",archives:"correspondem pelo hash do conteúdo",pendingUploads:"correspondem pelo nome do arquivo",settingsTemplates:"sempre sobrescrito"},replaceExisting:"Substituir dados existentes",keepExisting:"Manter dados existentes",replaceDescription:"Substituir itens que já existem com os dados do backup",keepDescription:"Restaurar apenas itens que não existem",caution:"Atenção:",cautionText:"Sobrescrever substituirá suas configurações atuais pelos dados do backup. Os códigos de acesso da impressora nunca são sobrescritos por segurança.",itemsRestored:"Itens Restaurados",itemsSkipped:"Itens Ignorados",restored:"Restaurado",skipped:"Ignorado (já existe)",filesLabel:"Arquivos (3MF, miniaturas, etc.)",newApiKeysGenerated:"Novas Chaves API Geradas",newApiKeysWarning:"Essas chaves são exibidas apenas uma vez. Copie-as agora!",processingBackup:"Processando arquivo de backup...",noDataFound:"Nenhum dado foi encontrado para restaurar no arquivo de backup.",failedToRestore:"Falha ao restaurar o backup. Verifique o formato do arquivo."},backupExport:{title:"Exportar Backup",selectData:"Selecione os dados a incluir",selectAll:"Selecionar Todos",selectNone:"Selecionar Nenhum",categoryDescriptions:{settings:"Idioma, tema, preferências de atualização",notifications:"ntfy, Pushover, Discord, etc.",templates:"Modelos de mensagens personalizadas",smartPlugs:"Configurações de tomadas Tasmota",externalLinks:"Links da barra lateral para serviços externos",printers:"Informações da impressora (códigos de acesso excluídos)",plateDetection:"Imagens de referência de placa vazia",filaments:"Tipos e custos de filamento",maintenance:"Cronogramas de manutenção personalizados",archives:"Todos os dados de impressão + arquivos (3MF, miniaturas, fotos)",projects:"Projetos, itens de BOM e anexos",pendingUploads:"Uploads de impressora virtual aguardando revisão",apiKeys:"Chaves API de webhook (novas chaves geradas na importação)"},requiresPrinters:"Requer que as impressoras sejam selecionadas",zipFileWarning:"Um arquivo ZIP será criado.",zipFileDescription:"Inclui todos os arquivos 3MF, miniaturas, timelapses e fotos. Isso pode levar algum tempo e resultar em um arquivo grande.",includeAccessCodes:"Incluir Códigos de Acesso",includeAccessCodesDescription:"Para transferir para outra máquina",includeAccessCodesWarning:"Os códigos de acesso serão incluídos em texto simples. Mantenha este arquivo de backup seguro!",categoriesSelected:"{{selectedCount}} categorias selecionadas"},pendingUploads:{placeholders:{notes:"Adicione notas sobre esta impressão..."},discardUpload:"Descartar Upload",archiveAllUploads:"Arquivar Todos os Uploads",discardAllUploads:"Descartar Todos os Uploads",archive:"Arquivar",timeAgo:{justNow:"Agora mesmo",minutesAgo:"há {{minutes}} minutos",hoursAgo:"há {{hours}} horas",daysAgo:"há {{days}} dias"}},apiBrowser:{placeholders:{requestBody:"Corpo da requisição JSON...",searchEndpoints:"Pesquisar endpoints..."}},configureAmsSlot:{title:"Configurar Slot AMS",slotConfigured:"Slot Configurado!",configuringSlot:"Configurando slot:",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Pesquisar predefinições...",colorPlaceholder:"Nome da cor ou hex (ex.: marrom, FF8800)",clearCustomColor:"Limpar cor personalizada",noCloudPresets:"Nenhuma predefinição na nuvem. Faça login no Bambu Cloud para sincronizar.",noPresetsAvailable:"Nenhuma predefinição disponível. Faça login no Bambu Cloud ou importe perfis locais.",noMatchingPresets:"Nenhuma predefinição correspondente encontrada.",custom:"Personalizado",builtin:"Integrado",settingsSentToPrinter:"Configurações enviadas para a impressora",filamentProfile:"Perfil de Filamento",kProfileLabel:"Perfil K (Avanço de Pressão)",filteringFor:"Filtrando por: {{material}}",noKProfile:"Nenhum perfil K (usar padrão 0.020)",noMatchingKProfiles:"Nenhum perfil K correspondente encontrado. O K padrão=0.020 será usado.",selectFilamentFirst:"Selecione um perfil de filamento primeiro",kFromCalibration:"K={{value}} da calibração da impressora",customColorLabel:"Cor Personalizada (opcional)",presetColors:"Cores de {{name}}:",showLessColors:"Mostrar menos cores",showMoreColors:"Mostrar mais cores",clear:"Limpar",hexLabel:"Hex: #{{hex}}",resetting:"Redefinindo...",resetSlot:"Redefinir Slot",cancel:"Cancelar",configuring:"Configurando...",configureSlot:"Configurar Slot"},githubBackup:{title:"Backup do GitHub",history:"Histórico",downloadBackup:"Baixar Backup",restoreBackup:"Restaurar Backup",noBackupsYet:"Nenhum backup ainda"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Pesquisar tags...",renameTag:"Renomear tag",deleteTag:"Excluir tag"},notificationTemplates:{placeholders:{title:"Título da notificação...",body:"Corpo da notificação..."}},batchTag:{placeholders:{newTag:"Digite uma nova tag..."}},photoGallery:{deletePhoto:"Excluir foto"},filamentHoverCard:{copySpoolUuid:"Copiar UUID do carretel"},kProfilesView:{hasNote:"Possui nota",copyProfile:"Copiar perfil"},layout:{openMenu:"Abrir menu",noPermissionSystemInfo:"Você não tem permissão para visualizar informações do sistema"},dashboard:{dragToReorder:"Arrastar para reordenar",hideWidget:"Ocultar widget"},notificationProviderCard:{deleteNotificationProvider:"Excluir provedor de notificação"},fileManagerModal:{closeFileManager:"Fechar gerenciador de arquivos",sortFiles:"Ordenar arquivos",goToParentFolder:"Ir para a pasta pai",threeView:"Visualização 3D"},embeddedCameraViewer:{refreshStream:"Atualizar stream",close:"Fechar",zoomOut:"Reduzir zoom",resetZoom:"Redefinir zoom",zoomIn:"Aumentar zoom",dragToResize:"Arrastar para redimensionar"},timelapseViewer:{skipBack5s:"Voltar 5s",skipForward5s:"Avançar 5s"},notificationProviders:{descriptions:{email:"Notificações por email SMTP",telegram:"Notificações via bot do Telegram",discord:"Enviar para canal do Discord via webhook",ntfy:"Notificações push gratuitas e auto-hospedáveis",pushover:"Notificações push simples e confiáveis",callmebot:"Notificações gratuitas via WhatsApp pelo CallMeBot",webhook:"POST HTTP genérico para qualquer URL"}},logViewer:{searchPlaceholder:"Pesquisar mensagem ou nome do logger...",noLogEntries:"Nenhuma entrada de log encontrada"},switchbarPopover:{noSwitchesInSwitchbar:"Nenhum switch na barra de switches"},projectPageModal:{placeholders:{title:"Título",designer:"Designer",license:"Licença",description:"Digite a descrição...",profileTitle:"Título do perfil",profileDescription:"Descrição do perfil..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Aguardando",justNow:"Agora mesmo",now:"Agora",minsAgo:"{{count}}min atrás",inMins:"em {{count}}min",hoursAgo:"{{count}}h atrás",inHours:"em {{count}}h",daysAgo:"{{count}}d atrás",inDays:"em {{count}}d"},spoolbuddy:{nav:{dashboard:"Painel",ams:"AMS",inventory:"Inventário",writeTag:"Escrever",settings:"Configurações"},status:{nfcReady:"NFC pronto",nfcOff:"NFC desligado",offline:"Offline",online:"Online",noPrinters:"Sem impressoras",deviceOffline:"Dispositivo offline",waitingConnection:"Aguardando conexão do dispositivo...",systemReady:"Sistema pronto",status:"Status"},dashboard:{readyToScan:"Pronto para escanear",idleMessage:"Coloque um carretel na balança para identificá-lo",nfcHint:"A tag NFC será lida automaticamente",device:"Dispositivo",syncWeight:"Sincronizar peso",weightSynced:"Sincronizado!",unknownTag:"Tag desconhecida",newTag:"Nova tag detectada",onScale:"na balança",linkSpool:"Vincular ao carretel",linkTagTitle:"Vincular tag ao carretel",linkTag:"Vincular tag",selectSpool:"Selecione um carretel para vincular a esta tag:",noUntagged:"Nenhum carretel sem tag encontrado",tagDetected:"Tag detectada",noTag:"Sem tag",tagId:"Tag",grossWeight:"Peso bruto",spoolSize:"Tamanho do carretel",close:"Fechar",currentSpool:"Carretel Atual"},modal:{spoolDetected:"Carretel Detectado",assignToAms:"Atribuir ao AMS",syncWeight:"Sincronizar Peso",weightSynced:"Sincronizado!",syncing:"Sincronizando...",newTagDetected:"Nova Tag Detectada",addToInventory:"Adicionar ao Inventário",assignToAmsTitle:"Atribuir ao AMS",selectSlot:"Selecionar um slot",assign:"Atribuir",assigning:"Atribuindo...",assignSuccess:"Atribuído!",assignError:"Falha ao atribuir carretel. Tente novamente.",noPrinterSelected:"Selecionar uma impressora...",noAmsDetected:"Nenhum AMS detectado nesta impressora",slot:"Slot"},weight:{noReading:"Sem leitura",stable:"Estável",measuring:"Medindo...",tare:"Tarar",calibrate:"Calibrar"},spool:{remaining:"Restante",material:"Material",brand:"Marca",color:"Cor",coreWeight:"Núcleo",labelWeight:"Rótulo",scaleWeight:"Balança",netWeight:"Líquido",lastUsed:"Último uso"},ams:{noData:"Nenhum AMS detectado",connectAms:"Conecte um AMS para ver os slots",noPrinter:"Nenhuma impressora selecionada",selectPrinter:"Selecione uma impressora na barra superior",printerDisconnected:"Impressora desconectada",humidity:"Umidade",level:"Nível",active:"Ativo",slot:"Slot",empty:"Vazio"},inventory:{search:"Buscar carretéis...",empty:"Nenhum carretel no inventário",noResults:"Nenhum carretel correspondente",spools:"carretéis",addSpool:"Adicionar carretel"},settings:{tabDevice:"Dispositivo",tabDisplay:"Tela",tabScale:"Balança",tabUpdates:"Atualizações",nfcReader:"Leitor NFC",type:"Tipo",connection:"Conexão",notConnected:"N/A",deviceInfo:"Info do dispositivo",hostname:"Host",uptime:"Tempo de atividade",brightness:"Brilho",saved:"Salvo",noBacklight:"Nenhuma retroiluminação DSI detectada. O controle de brilho requer uma tela DSI.",screenBlank:"Tempo para desligar tela",screenBlankDesc:"A tela desliga após inatividade. Toque para despertar.",displayNote:"O brilho é aplicado como filtro de software.",scaleCalibration:"Calibração da balança",currentWeight:"Peso atual",tareOffset:"Tara",calFactor:"Fator",knownWeight:"Peso conhecido",calStep1:"Remova todos os itens da balança e pressione Definir zero.",calStep2:"Coloque o peso conhecido na balança.",setZero:"Definir zero",calibrateNow:"Calibrar",calibrated:"Calibrado",tareSet:"Comando de tara enviado. Aguardando dispositivo...",tareFailed:"Falha ao enviar comando de tara",zeroSet:"Ponto zero definido. Coloque o peso conhecido na balança.",calibrationDone:"Calibração concluída!",calibrationFailed:"Falha na calibração",lastCalibrated:"Última calibração",stable:"Estável",settling:"Estabilizando...",firmware:"Firmware",scale:"Balança",noDevice:"Nenhum dispositivo SpoolBuddy encontrado",daemonVersion:"Versão do daemon",currentVersion:"Atual",versionPending:"Aguardando daemon...",checking:"Verificando...",checkUpdates:"Verificar atualizações",updateAvailable:"Atualização disponível",updateInstructions:"Atualize via SSH: execute o script de instalação do SpoolBuddy.",upToDate:"Atualizado",includeBeta:"Incluir versões beta"},writeTag:{tabExisting:"Bobina existente",tabNew:"Nova bobina",tabReplace:"Substituir tag",searchPlaceholder:"Buscar por material, cor, marca...",noUntaggedSpools:"Nenhuma bobina sem tag",noTaggedSpools:"Nenhuma bobina com tag",selectSpool:"Selecione uma bobina e coloque um NTAG no leitor",placeTag:"Coloque um NTAG no leitor",tagReady:"Tag detectado — pronto para gravar",writeTag:"Gravar Tag",replaceTag:"Substituir Tag",writing:"Gravando tag...",waiting:"Aguardando SpoolBuddy...",writeSuccess:"Tag gravado com sucesso!",writeFailed:"Falha na gravação",queueFailed:"Falha ao enfileirar comando de gravação",tryAgain:"Tentar novamente",cancel:"Cancelar",replaceWarning:"O tag antigo será desvinculado. O novo tag o substituirá.",deviceOffline:"SpoolBuddy está offline",material:"Material",colorName:"Nome da cor",color:"Cor",brand:"Marca",weight:"Peso (g)",createSpool:"Criar bobina",creating:"Criando...",spoolCreated:"Bobina criada! Pronto para gravar.",createFailed:"Falha ao criar bobina"},quickMenu:{printerPower:"Energia da impressora",systemControls:"Sistema",restartDaemon:"Reiniciar daemon",restartBrowser:"Reiniciar navegador",reboot:"Reiniciar",shutdown:"Desligar",swipeToClose:"Deslize para baixo para fechar",confirmTitle:"Confirmar",confirmShutdown:"Tem certeza de que deseja desligar o SpoolBuddy? Você precisará de acesso físico para ligá-lo novamente.",confirmReboot:"Tem certeza de que deseja reiniciar o SpoolBuddy?",confirmRestartDaemon:"Reiniciar o daemon do SpoolBuddy? NFC e balança ficarão temporariamente indisponíveis.",confirmRestartBrowser:"Reiniciar o navegador kiosk? A tela ficará brevemente preta.",confirm:"Confirmar",confirmPlugOn:"Ligar {{name}}?",confirmPlugOff:"Desligar {{name}}?",turnOn:"Ligar",turnOff:"Desligar"}},bugReport:{title:"Reportar um bug",description:"Descrição",descriptionPlaceholder:"O que deu errado? Por favor, descreva o problema...",email:"Email (opcional)",emailPlaceholder:"seu@email.com.br",emailPrivacy:"Se fornecido, seu email será incluído em uma seção recolhida da issue no GitHub para que o mantenedor possa entrar em contato.",screenshot:"Captura de tela",uploadOrPaste:"Enviar, colar ou arrastar uma imagem",dataCollectedSummary:"Quais dados são incluídos no relatório?",dataIncluded:"Incluídos:",dataIncludedList:"Versão do app, SO, arquitetura, versão Python, estatísticas do banco de dados (apenas contagens), modelos de impressora, quantidade de bicos, versões de firmware, status de conexão, status de integrações (Spoolman, MQTT, HA), configurações não sensíveis, contagem de interfaces de rede, detalhes Docker, versões de dependências.",dataNeverIncluded:"Nunca incluídos:",dataNeverIncludedList:"Nomes de impressoras, números de série, códigos de acesso, senhas, endereços IP, endereços de email, chaves de API, tokens, URLs de webhook, nomes de host ou nomes de usuário.",submit:"Enviar",startLogging:"Iniciar log de depuração",stepEnableLogging:"Log de depuração ativado",stepReproduce:"Reproduza o problema agora",stepStopLogging:"Parar & enviar relatório",stopAndSubmit:"Parar & Enviar",maxDuration:"Para automaticamente após {{minutes}} min",stoppingLogs:"Coletando logs & enviando...",submitting:"Enviando relatório de bug...",submitSuccess:"Relatório de bug enviado com sucesso!",submitFailed:"Falha ao enviar relatório de bug",thankYou:"Obrigado!",submitted:"Seu relatório de bug foi enviado.",viewIssue:"Ver issue",unexpectedError:"Ocorreu um erro inesperado"},failureDetection:{title:"Detecção de Falhas por IA",description:"Monitora impressões via API ML do Obico auto-hospedada e age automaticamente em falhas detectadas.",mlUrl:"URL da API ML do Obico",mlUrlHint:"URL base do seu contêiner Obico ml_api auto-hospedado (ex.: http://192.168.1.10:3333).",test:"Testar",testSuccess:"API ML acessível e operacional.",testFailed:"Não foi possível acessar a API ML.",sensitivity:"Sensibilidade",sensitivityLow:"Baixa (menos falsos positivos)",sensitivityMedium:"Média (equilibrada)",sensitivityHigh:"Alta (detecção precoce, mais falsos positivos)",sensitivityHint:"Ajusta os limiares de confiança que disparam avisos e falhas.",action:"Ação em falha detectada",actionNotify:"Apenas notificar",actionPause:"Pausar impressão",actionPauseOff:"Pausar e cortar energia",pollInterval:"Intervalo de verificação (segundos)",pollIntervalHint:"Frequência de verificação de cada impressora durante a impressão. Mínimo 5s, máximo 120s.",externalUrlMissing:"URL externa não configurada.",externalUrlHint:"A API ML busca a imagem da câmera por URL. Defina a URL externa nas configurações gerais para que o contêiner da API ML possa alcançar o Bambuddy.",perPrinterTitle:"Impressoras monitoradas",perPrinterHint:"Escolha quais impressoras o serviço de detecção monitora.",monitorAll:"Monitorar todas as impressoras conectadas",statusTitle:"Status",serviceRunning:"Serviço em execução",thresholds:"Limiares baixo / alto",activePrinters:"Impressões ativas",noActivePrints:"Nenhuma impressão em andamento.",historyTitle:"Detecções recentes",noHistory:"Nenhuma detecção ainda."}},Xue={nav:{printers:"打印机",archives:"归档",queue:"队列",stats:"统计",profiles:"配置文件",maintenance:"维护",projects:"项目",inventory:"耗材",files:"文件管理器",notifications:"通知",settings:"设置",system:"系统",collapseSidebar:"收起侧边栏",expandSidebar:"展开侧边栏",update:"更新",updateAvailable:"有可用更新：v{{version}}",updateAvailableBanner:"版本 {{version}} 已发布！",viewUpdate:"查看更新",viewOnGithub:"在 GitHub 上查看",keyboardShortcuts:"键盘快捷键 (?)",switchToLight:"切换到浅色模式",switchToDark:"切换到深色模式",smartSwitches:"智能开关",logout:"退出登录"},common:{save:"保存",saving:"保存中...",cancel:"取消",delete:"删除",edit:"编辑",add:"添加",close:"关闭",confirm:"确认",loading:"加载中...",error:"错误",success:"成功",warning:"警告",enabled:"已启用",disabled:"已禁用",yes:"是",no:"否",on:"开",off:"关",all:"全部",none:"无",search:"搜索",filter:"筛选",sort:"排序",refresh:"刷新",download:"下载",upload:"上传",uploading:"上传中...",uploadFailed:"上传失败",actions:"操作",status:"状态",name:"名称",description:"描述",date:"日期",time:"时间",hours:"小时",minutes:"分钟",seconds:"秒",days:"天",enable:"启用",disable:"禁用",permissions:"权限",noPrinters:"未配置打印机",noData:"暂无数据",linkNotFound:"未找到链接",required:"必填",optional:"可选",dismiss:"关闭",apply:"应用",reset:"重置",export:"导出",import:"导入",clear:"清除",selectAll:"全选",deselectAll:"取消全选",noChange:"— 不更改 —",unchanged:"未更改",unassigned:"未分配",unknown:"未知",unknownError:"未知错误",today:"今天",tomorrow:"明天",asap:"尽快",overdue:"已逾期",now:"现在",collapse:"收起",expand:"展开",viewArchive:"查看归档",viewInFileManager:"在文件管理器中查看",addedBy:"由 {{username}} 添加",prints:"次打印",more:"还有 {{count}} 个",ascending:"升序",descending:"降序",back:"返回",copy:"复制",copied:"已复制!",printer:"打印机",remove:"移除",type:"类型",print:"打印",rename:"重命名",move:"移动",create:"创建",duplicate:"复制",left:"左",right:"右"},printers:{title:"打印机",addPrinter:"添加打印机",editPrinter:"编辑打印机",deletePrinter:"删除打印机",printerName:"打印机名称",serialNumber:"序列号",ipAddress:"IP 地址 / 主机名",accessCode:"访问码",model:"型号",nozzleCount:"喷嘴数量",autoArchive:"自动归档",status:{available:"可用",idle:"空闲",printing:"打印中",paused:"已暂停",offline:"离线",problem:"故障",error:"错误",finished:"已完成",unknown:"未知"},temperatures:{nozzle:"喷嘴",bed:"热床",chamber:"腔室"},progress:"{{percent}}% 完成",timeRemaining:"剩余 {{time}}",deleteConfirm:'确定要删除"{{name}}"吗？',maintenanceOk:"维护正常",maintenanceWarning:"{{count}} 个警告",maintenanceWarning_plural:"{{count}} 个警告",maintenanceDue:"{{count}} 个到期",maintenanceDue_plural:"{{count}} 个到期",sort:{name:"名称",status:"状态",model:"型号",location:"位置",ascending:"升序排列",descending:"降序排列"},cardSize:{small:"小卡片",medium:"中卡片",large:"大卡片",extraLarge:"超大卡片"},hideOffline:"隐藏离线",nextAvailable:"下一个可用",powerOn:"开机",offlinePrintersWithPlugs:"带智能插座的离线打印机",noPrintersConfigured:"尚未配置打印机",search:"搜索打印机...",noSearchResults:"没有打印机符合您的搜索或筛选条件",filter:{allStatuses:"所有状态",allLocations:"所有位置"},readyToPrint:"准备打印",external:"外部",extL:"外置左",extR:"外置右",deleteArchives:"删除打印归档",noLabel:"无标签",printPreview:"打印预览",width:"宽度",height:"高度",noObjectsFound:"未找到对象",objectsLoadedOnPrintStart:"对象在打印开始时加载",willBeSkipped:"将被跳过",name:"名称",serialCannotBeChanged:"序列号无法更改",locationHelp:"用于分组打印机和筛选队列任务",wifiSignal:{veryWeak:"非常弱",weak:"弱",fair:"一般",good:"良好",excellent:"优秀"},maintenanceUpToDate:"所有维护均已完成 - 点击查看",chamberLightOn:"打开腔室灯",chamberLightOff:"关闭腔室灯",files:"文件",browseFiles:"浏览打印机文件",autoOffAfterPrint:"打印后自动关机",autoOffExecuted:"已执行自动关机 - 开启打印机以重置",hmsErrors:"HMS 错误",viewHmsErrors:"查看 {{count}} 个 HMS 错误",resume:"继续",pause:"暂停",stop:"停止",camera:"摄像头",skipObject:"跳过对象",reconnect:"重新连接",forceRefresh:"强制刷新",forceRefreshSuccess:"已请求刷新",mqttDebug:"MQTT 调试",printerInformation:"打印机信息",copyToClipboard:"复制",copied:"已复制！",state:"状态",wifiSignalLabel:"WiFi 信号",developerMode:"开发者模式",enabled:"已启用",disabled:"已禁用",addedOn:"添加日期",sdCard:"SD 卡",inserted:"已插入",notInserted:"未插入",totalPrintHours:"打印时长",activeNozzle:"当前：{{nozzle}} 喷嘴",nozzleRack:"喷嘴架",nozzleDocked:"已停靠",nozzleMounted:"已安装",nozzleActive:"使用中",nozzleIdle:"空闲",nozzleDiameter:"直径",nozzleType:"类型",nozzleStatus:"状态",nozzleFilament:"耗材",nozzleWear:"磨损",nozzleMaxTemp:"最高温度",nozzleSerial:"序列号",nozzleHardenedSteel:"硬化钢",nozzleStainlessSteel:"不锈钢",nozzleTungstenCarbide:"碳化钨",nozzleFlow:"流量",nozzleHighFlow:"高流量",nozzleStandardFlow:"标准",firmwareUpdate:"固件更新",firmwareInstructions:"在打印机触摸屏上，前往",firmwareNav:"导航到",settings:"设置",firmware:"固件",discoverPrinters:"发现打印机",searching:"搜索中...",manualEntry:"手动输入",addFromCloud:"从云端添加",toast:{printerDeleted:"打印机已删除",missingSpoolAssignment:"已在{{printer}}上开始打印。以下料槽未分配耗材: {{slots}}",printerAdded:"打印机已添加",printerUpdated:"打印机已更新",failedToDelete:"删除打印机失败",failedToAdd:"添加打印机失败",failedToUpdate:"更新打印机失败",commandSent:"命令已发送",failedToSendCommand:"发送命令失败",turnedOn:"{{name}} 已开启",failedToPowerOn:"开启 {{name}} 失败",scriptTriggered:"脚本已触发",printStopped:"打印已停止",printPaused:"打印已暂停",printResumed:"打印已继续",referenceDeleted:"参考已删除",detectionAreaSaved:"检测区域已保存",failedToRunScript:"运行脚本失败",failedToStopPrint:"停止打印失败",failedToPausePrint:"暂停打印失败",failedToResumePrint:"继续打印失败",failedToControlChamberLight:"控制腔室灯失败",failedToSetSpeed:"设置打印速度失败",failedToUpdateSetting:"更新设置失败",failedToSkipObjects:"跳过对象失败",failedToRereadRfid:"重新读取 RFID 失败",failedToCheckPlate:"检查打印板失败",failedToUpdateLabel:"更新标签失败",failedToDeleteReference:"删除参考失败",failedToSaveDetectionArea:"保存检测区域失败",plateCheckEnabled:"打印板检查已启用",plateCheckDisabled:"打印板检查已禁用",calibrationSaved:"校准已保存！",calibrationFailed:"校准失败",rfidRereadInitiated:"已发起 RFID 重新读取"},connection:{connected:"已连接",offline:"离线"},queue:{inQueue:"队列中有 {{count}} 个打印任务",inQueue_plural:"队列中有 {{count}} 个打印任务"},controls:"控制",rfid:{reread:"重新读取 RFID"},bedJog:{title:"移动热床",bed:"热床",step:"步长 (mm)",up:"热床上移",down:"热床下移",disabledWhilePrinting:"打印中已禁用",notHomedTitle:"打印机未归零",notHomedMessage:"自上次打印以来 Z 轴尚未归零。请先归零 Z 以确保安全定位，或者直接移动 — 软限位将被绕过。",homeZ:"归零 Z",moveAnyway:"强制移动",homingStarted:"Z 轴归零中…"},permission:{noAdd:"您没有添加打印机的权限",noEdit:"您没有编辑打印机的权限",noDelete:"您没有删除打印机的权限",noControl:"您没有控制打印机的权限",noFiles:"您没有访问打印机文件的权限",noAmsRfid:"您没有重新读取 AMS RFID 的权限",noSmartPlugControl:"您没有控制智能插座的权限",noCamera:"您没有查看摄像头的权限"},modal:{addTitle:"添加打印机",editTitle:"编辑打印机",myPrinter:"我的打印机",selectModel:"选择型号...",locationGroup:"位置 / 分组（可选）",locationPlaceholder:"例如：工作室、办公室、地下室",autoArchiveLabel:"自动归档已完成的打印",fromPrinterSettings:"来自打印机设置",modelOptional:"型号（可选）",saveChanges:"保存更改"},skipObjects:{tooltip:"跳过对象",onlyWhilePrinting:"跳过对象（仅在打印时）",requiresMultiple:"跳过对象（需要2个以上对象）",title:"跳过对象",matchIdsInfo:"将 ID 与打印机显示屏上的 ID 进行对照",printerShowsIds:"打印机屏幕上显示构建板上对象的 ID",skipSelected:"跳过所选",skipping:"跳过中...",noObjectsSelected:"未选择对象",selectObjectsToSkip:"选择要从当前打印中跳过的对象",skipped:"已跳过",objectsSkipped:"对象已跳过",activeCount:"{{count}} 个活跃",waitForLayer:"等待第2层以上才能跳过对象（当前第 {{layer}} 层）",skip:"跳过",confirmTitle:"跳过对象？",confirmMessage:'确定要跳过"{{name}}"吗？此操作无法撤销。'},confirm:{deleteTitle:"删除打印机",deleteMessage:'确定要删除"{{name}}"吗？这将移除所有连接设置。',deleteArchivesNote:"此打印机的所有打印历史将被永久删除。",keepArchivesNote:"打印历史将保留，但不再与此打印机关联。",stopTitle:"停止打印",stopMessage:'确定要停止"{{name}}"上的当前打印吗？这将取消打印任务。',stopButton:"停止打印",pauseTitle:"暂停打印",pauseMessage:'确定要暂停"{{name}}"上的当前打印吗？',pauseButton:"暂停打印",resumeTitle:"继续打印",resumeMessage:'确定要继续"{{name}}"上的打印吗？',resumeButton:"继续打印",powerOnTitle:"开启打印机",powerOnMessage:'确定要打开"{{name}}"的电源吗？',powerOnButton:"开机",powerOffTitle:"关闭打印机",powerOffMessage:'确定要关闭"{{name}}"的电源吗？',powerOffWarning:'警告："{{name}}"正在打印中！确定要关闭电源吗？这将中断打印并可能损坏打印机。',powerOffButton:"关机"},bulk:{select:"选择",selectAll:"全选",selectByLocation:"按位置选择",selected:"已选择{{count}}台",actions:{stop:"停止",pause:"暂停",resume:"继续",clearPlate:"清除打印床",clearHMS:"清除通知"},confirm:{stopTitle:"停止{{count}}个打印任务",stopMessage:"这将取消{{count}}台打印机上的活动打印任务。此操作无法撤销。",stopButton:"全部停止",pauseTitle:"暂停{{count}}个打印任务",pauseMessage:"这将暂停{{count}}台打印机上的活动打印任务。",pauseButton:"全部暂停",clearPlateTitle:"清除{{count}}个打印床",clearPlateMessage:"这将清除{{count}}台打印机的打印床，可能会触发队列中的任务。",clearPlateButton:"全部清除"},success:"{{action}}已在{{count}}台打印机上完成",partial:"{{succeeded}}成功，{{failed}}失败",noneApplicable:"没有选中的打印机处于适合此操作的状态",selectByState:"按状态选择"},discovery:{title:"发现打印机",searching:"搜索中...",scanning:"扫描中...",scanProgress:"扫描中... {{scanned}}/{{total}}",foundPrinters:"发现 {{count}} 台打印机",noPrintersFound:"未找到打印机",noPrintersFoundSubnet:"在指定子网中未找到打印机。",noPrintersFoundNetwork:"在网络上未找到打印机。",allConfigured:"所有发现的打印机已配置完毕。",alreadyAdded:"已添加",select:"选择",manualEntry:"手动输入",addFromCloud:"从云端添加",subnetToScan:"要扫描的子网",dockerNote:"检测到 Docker 环境。请以 CIDR 格式输入打印机所在子网。需要在 docker-compose.yml 中设置 network_mode: host。",scanSubnet:"扫描子网查找打印机",discoverNetwork:"在网络上发现打印机",scanningSubnet:"正在扫描子网查找拓竹打印机...",scanningNetwork:"正在扫描网络...",serialRequired:"需要序列号",unknown:"未知",failedToStart:"启动发现失败"},drying:{start:"开始干燥",stop:"停止干燥",temperature:"温度",duration:"时长",hours:"小时",timeRemaining:"剩余 {{time}}",active:"干燥中",notSupported:"不支持干燥",powerRequired:"连接AMS电源适配器以启用干燥",startingDrying:"正在启动干燥...",stoppingDrying:"正在停止干燥...",rotateTray:"干燥时旋转料盘"},filaments:"耗材",openCameraOverlay:"打开摄像头叠加层",openCameraWindow:"在新窗口中打开摄像头",firmwareUpdateAvailable:"固件更新可用：{{current}} → {{latest}}",firmwareUpToDate:"固件 {{version}} — 已是最新",firmwareUpdateButton:"更新",plateDetection:{noPermission:"您没有更新打印机的权限",enabledClick:"打印板检查已启用 - 点击禁用",disabledClick:"打印板检查已禁用 - 点击启用",manageCalibration:"管理打印板检测校准",calibrationRequired:"需要校准",calibrationInstructions:"请确保构建板完全空置，然后点击校准。",calibrationDescription:"校准会拍摄空置打印板的参考图像。后续检查将与此参考进行比较以检测物体。",calibrationTip:"提示：您最多可以为不同的打印板存储5个校准。系统会在检查时自动使用最佳匹配。",plateEmpty:"打印板似乎是空的",objectsDetected:"在打印板上检测到物体",confidence:"置信度",difference:"差异",analysisPreview:"分析预览：",analysisLegend:"绿色框 = 检测区域，红色覆盖 = 与校准的差异",savedReferences:"已保存的参考 ({{count}}/{{max}})",deleteReference:"删除参考",labelPlaceholder:"标签...",clickToEdit:"{{label}} - 点击编辑",clickToAddLabel:"点击添加标签"},speed:{title:"打印速度",silent:"静音 (50%)",standard:"标准 (100%)",sport:"运动 (124%)",ludicrous:"疯狂 (166%)"},airduct:{title:"风道模式",cooling:"制冷",heating:"加热"},noSdCard:"无SD",door:{open:"开",closed:"关"},fans:{partCooling:"零件冷却风扇",auxiliary:"辅助风扇",chamber:"腔室风扇"},clickToViewHmsErrors:"点击查看 HMS 错误",estimatedCompletion:"预计完成时间",plateNumber:"板 {{number}}",slotOptions:"槽位选项",amsPopup:{friendlyName:"AMS 名称",friendlyNamePlaceholder:"例如 AMS 友好名称",serialNumber:"序列号",firmwareVersion:"固件",save:"保存",clear:"清除",noEditPermission:"您没有重命名 AMS 单元的权限"},firmwareModal:{title:"固件更新",titleUpToDate:"固件信息",currentVersion:"当前版本：",latestVersion:"最新版本：",releaseNotes:"发布说明",checkingPrereqs:"正在检查前提条件...",sdCardReady:"SD 卡已就绪。点击下方上传固件。",uploadedSuccess:"固件已上传到 SD 卡！",applyInstructions:"在打印机上应用更新：",step1:"在打印机触摸屏上，前往设置",step2:"导航到固件",step3:"选择从 SD 卡更新",step4:"更新将需要 10-20 分钟",done:"完成",starting:"启动中...",uploadFirmware:"上传固件",uploadFailed:"上传启动失败：{{error}}",uploadedToast:"固件已上传！请在打印机屏幕上触发更新。"},accessCodePlaceholder:"留空以保持当前值",roi:{title:"检测区域 (ROI)",xStart:"X 起点",yStart:"Y 起点",width:"宽度",height:"高度",instruction:"调整检测区域以聚焦到构建板。预览中的绿色框显示当前区域。"},developerModeWarning:"以下打印机未启用开发者局域网模式：{{names}}。某些功能可能无法使用。",howToEnable:"如何启用",incompatibleFile:"此文件是为 {{slicedFor}} 切片的，但该打印机是 {{printerModel}}",dropNotPrintable:"只能打印 .gcode 和 .gcode.3mf 文件",dropToPrint:"拖放以打印",cannotPrint:"打印机忙碌"},archives:{title:"打印归档",searchPlaceholder:"搜索归档...",filterByPrinter:"按打印机筛选",filterByStatus:"按状态筛选",sortBy:"排序方式",sortNewest:"最新优先",sortOldest:"最旧优先",sortName:"名称",sortDuration:"时长",sortLargest:"最大优先",sortSmallest:"最小优先",sortSize:"大小",noArchives:"未找到归档",noArchivesSearch:"没有匹配搜索的归档",originalPrintNotVisible:"原始打印不可见 - 请尝试清除筛选条件",noArchivesYet:"暂无归档",prints:"条打印",pagination:{showing:"显示",to:"至",of:"共",show:"每页",page:"页",all:"全部"},loadingArchives:"加载归档中...",releaseToUpload:"释放以上传",showAll:"显示全部",showFavoritesOnly:"仅显示收藏",gridView:"网格视图",listView:"列表视图",calendarView:"日历视图",logView:"打印日志",manageTags:"管理标签",showFailedPrints:"显示失败的打印",hideFailedPrints:"隐藏失败的打印",hideDuplicates:"隐藏重复项",viewOriginalPrint:"点击查看原始打印 (#{{id}})",printTime:"打印时间",filamentUsed:"耗材用量",cost:"成本",reprint:"重新打印",preview:"预览",deleteArchive:"删除归档",deleteConfirm:"确定要删除此归档吗？",favorite:"收藏",unfavorite:"取消收藏",viewDetails:"查看详情",status:{completed:"已完成",failed:"失败",stopped:"已停止"},toast:{source3mfAttached:"源 3MF 已附加：{{filename}}",failedUploadSource3mf:"上传源 3MF 失败",source3mfRemoved:"源 3MF 已移除",failedRemoveSource3mf:"移除源 3MF 失败",f3dAttached:"F3D 已附加：{{filename}}",failedUploadF3d:"上传 F3D 失败",f3dRemoved:"F3D 已移除",failedRemoveF3d:"移除 F3D 失败",timelapseAttached:"延时摄影已附加：{{filename}}",timelapseAlreadyAttached:"延时摄影已附加",noMatchingTimelapse:"未找到匹配的延时摄影",failedScanTimelapse:"扫描延时摄影失败",failedAttachTimelapse:"附加延时摄影失败",timelapseRemoved:"延时摄影已移除",failedRemoveTimelapse:"移除延时摄影失败",timelapseUploaded:"延时摄影已上传：{{filename}}",failedUploadTimelapse:"上传延时摄影失败",archiveDeleted:"归档已删除",failedDeleteArchive:"删除归档失败",addedToFavorites:"已添加到收藏",removedFromFavorites:"已从收藏中移除",projectUpdated:"项目已更新",failedUpdateProject:"更新项目失败",linkCopied:"链接已复制到剪贴板",failedCopyLink:"复制链接失败",photoDeleted:"照片已删除",failedDeletePhoto:"删除照片失败",failedDeleteArchives:"删除归档失败",failedUpdateFavorites:"更新收藏失败",exportDownloaded:"导出已下载",exportFailed:"导出失败"},menu:{print:"打印",schedule:"排程",openInBambuStudio:"在切片软件中打开",slice:"切片",externalLink:"外部链接",viewOnMakerWorld:"在 MakerWorld 上查看",preview3d:"3D 预览",viewTimelapse:"查看延时摄影",scanForTimelapse:"扫描延时摄影",uploadTimelapse:"上传延时摄影",removeTimelapse:"移除延时摄影",downloadSource3mf:"下载源 3MF",uploadSource3mf:"上传源 3MF",replaceSource3mf:"替换源 3MF",removeSource3mf:"移除源 3MF",uploadF3d:"上传 F3D",replaceF3d:"替换 F3D",downloadF3d:"下载 F3D",removeF3d:"移除 F3D",download:"下载",copyDownloadLink:"复制下载链接",qrCode:"二维码",viewPhotos:"查看照片",viewPhotosCount:"查看照片 ({{count}})",projectPage:"项目页面",addToFavorites:"添加到收藏",removeFromFavorites:"从收藏中移除",edit:"编辑",goToProject:"前往项目：{{name}}",addToProject:"添加到项目",removeFromProject:"从项目中移除",loading:"加载中...",noProjectsAvailable:"无可用项目",select:"选择",deselect:"取消选择",delete:"删除"},permission:{noReprint:"您没有重新打印此归档的权限",noAddToQueue:"您没有添加到队列的权限",noUpdateArchives:"您没有更新归档的权限",noUploadFiles:"您没有上传文件的权限",noDownload:"您没有下载归档的权限",noCopyLink:"您没有复制下载链接的权限",noDelete:"您没有删除此归档的权限",noCreate:"您没有创建归档的权限"},card:{previousPlate:"上一个板",nextPlate:"下一个板",plateNumber:"板 {{index}}",moreOptions:"右键查看更多选项",addToFavorites:"添加到收藏",removeFromFavorites:"从收藏中移除",cancelled:"已取消",failed:"失败",duplicate:"重复",duplicateTitle:"此模型之前已打印过",openSource3mf:"在 Bambu Studio 中打开源 3MF（右键查看更多选项）",downloadF3d:"下载 Fusion 360 设计文件",viewTimelapse:"查看延时摄影",viewPhoto:"查看 1 张照片",viewPhotos:"查看 {{count}} 张照片",openFolder:"打开文件夹：{{name}}",slicedFile:"已切片文件 - 可以打印",sourceFile:"仅源文件 - 无 AMS 映射可用",gcode:"GCODE",source:"源文件",project:"项目：{{name}}",estimated:"预计：{{time}}",actual:"实际：{{time}}",accuracy:"准确度：{{percent}}%",filament:"{{weight}}g",layer:"{{count}} 层",layers:"{{count}} 层",object:"{{count}} 个对象",objects:"{{count}} 个对象",slicedFor:"为 {{model}} 切片",uploadedBy:"上传者",noPermissionReprint:"您没有重新打印的权限",noFileForReprint:"无可用的 3MF 文件 — 打印记录时无法从打印机下载该文件",noPermissionEdit:"您没有编辑归档的权限",noPermissionDelete:"您没有删除归档的权限",reprint:"重新打印",schedulePrint:"排程打印",schedule:"排程",openInBambuStudio:"在切片软件中打开",openInBambuStudioToSlice:"在切片软件中打开进行切片",slice:"切片",externalLink:"外部链接",makerWorld:"MakerWorld：{{designer}}",viewProject:"查看项目",noExternalLink:"无外部链接",preview3d:"3D 预览",download:"下载",edit:"编辑",delete:"删除"},modal:{deleteArchive:"删除归档",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',deleteButton:"删除",removeSource3mf:"移除源 3MF",removeSource3mfConfirm:'确定要从"{{name}}"中移除源 3MF 文件吗？这将删除原始切片项目文件。',removeButton:"移除",removeF3d:"移除 F3D",removeF3dConfirm:'确定要从"{{name}}"中移除 Fusion 360 设计文件吗？',removeTimelapse:"移除延时摄影",removeTimelapseConfirm:'确定要从"{{name}}"中移除延时摄影视频吗？',timelapse:"{{name}} - 延时摄影",selectTimelapse:"选择延时摄影",selectTimelapseDesc:"未找到自动匹配。请选择此打印的延时摄影：",deleteArchives:"删除归档",deleteArchivesConfirm:"确定要删除 {{count}} 个归档吗？此操作无法撤销。",deleteCount:"删除 {{count}} 个"},page:{title:"归档",printsCount:"{{filtered}} / {{total}} 次打印",dropFilesHere:"将 .3mf 文件拖放到此处",releaseToUpload:"释放以上传",only3mfSupported:"仅支持 .3mf 文件",close:"关闭",selected:"已选择 {{count}} 个",selectAll:"全选",tags:"标签",project:"项目",favorite:"收藏",delete:"删除",toggledFavorites:"已切换 {{count}} 个归档的收藏状态",failedUpdateFavorites:"更新收藏失败",archivesDeleted:"已删除 {{count}} 个归档",failedDeleteArchives:"删除归档失败",photoDeleted:"照片已删除",failedDeletePhoto:"删除照片失败"},list:{name:"名称",printer:"打印机",date:"日期",size:"大小",actions:"操作",hasTimelapse:"有延时摄影"},log:{date:"日期",printName:"打印名称",printer:"打印机",user:"用户",status:"状态",duration:"时长",filament:"耗材",allPrinters:"所有打印机",allUsers:"所有用户",allStatuses:"所有状态",cancelled:"已取消",skipped:"已跳过",dateFrom:"从",dateTo:"到",noEntries:"未找到打印日志条目",showing:"显示 {{count}} / {{total}} 条",rowsPerPage:"行数",page:"页",prev:"上一页",next:"下一页",clearLog:"清除日志",clearLogTitle:"清除打印日志",clearLogConfirm:"所有打印日志条目将被永久删除。归档和队列项目不受影响。此操作无法撤销。确定要继续吗？",clearLogButton:"全部清除",cleared:"已清除 {{count}} 条日志",clearFailed:"清除打印日志失败"}},queue:{title:"打印队列",subtitle:"排程和管理您的打印任务",addToQueue:"添加到队列",print:"打印",reprint:"重新打印",schedulePrint:"排程打印",editQueueItem:"编辑队列项目",printToPrinters:"打印到 {{count}} 台打印机",queueToPrinters:"排队到 {{count}} 台打印机",queueSelectedPlates:"将 {{count}} 个热床加入队列",selectAllPlates:"选择全部 {{count}} 个热床",deselectAll:"取消全选",printQueued:"已加入打印队列",itemsQueued:"{{count}} 个任务已加入队列",sending:"发送中...",sendingProgress:"发送中 {{current}}/{{total}}...",adding:"添加中...",addingProgress:"添加中 {{current}}/{{total}}...",savingProgress:"保存中 {{current}}/{{total}}...",clearQueue:"清空队列",clearHistory:"清除历史",emptyQueue:"队列为空",position:"位置",scheduledTime:"排程时间",moveUp:"上移",moveDown:"下移",startNow:"立即开始",printingInProgress:"打印进行中...",viewArchive:"查看归档",viewInFileManager:"在文件管理器中查看",itemCount:"{{count}} 个项目",itemCount_plural:"{{count}} 个项目",dragToReorder:"拖动以重新排序（仅限尽快）",reorderHint:'位置仅影响"尽快"项目。排程项目按设定时间运行。',sjf:{label:"SJF",tooltip:"最短任务优先 — 调度器优先处理较短的打印任务"},addedBy:"由 {{name}} 添加",nextInQueue:"队列中的下一个",clearPlate:"清理打印板并开始下一个",clearPlateSuccess:"打印板已清理 — 准备进行下一个打印",plateReady:"打印板已清理 — 准备进行下一个打印",plateNumber:"板 {{index}}",quantity:"数量",quantityHint:"创建 {{count}} 个队列项目",activeBatches:"活跃批次",batchProgress:"已完成 {{completed}}/{{total}}",cancelBatch:"取消剩余",batchCancelled:"已取消剩余批次项目",cancelBatchConfirmTitle:"取消批次",cancelBatchConfirmMessage:"取消此批次中所有剩余的待处理项目？",batch:"批次",sections:{currentlyPrinting:"正在打印",queued:"排队中",history:"历史"},status:{pending:"等待中",waiting:"等待中",printing:"打印中",paused:"已暂停",completed:"已完成",failed:"失败",skipped:"已跳过",cancelled:"已取消"},summary:{printing:"打印中",queued:"排队中",totalTime:"总队列时间",totalWeight:"总队列重量",history:"历史"},filter:{allPrinters:"所有打印机",unassigned:"未分配",allStatus:"所有状态",allLocations:"所有位置",any:"任意"},sort:{byPosition:"按位置排序",byName:"按名称排序",byPrinter:"按打印机排序",bySchedule:"按排程排序",byDate:"按日期排序",ascendingOldest:"升序（最旧优先）",descendingNewest:"降序（最新优先）"},badges:{staged:"已暂存",requiresPrevious:"需要前一个成功",autoPowerOff:"自动关机",gcodeInjection:"G-code"},empty:{title:"没有排程的打印",description:'从归档页面使用右键菜单中的"排程"选项来排程打印，或拖放文件开始。'},time:{asap:"尽快",overdue:"已逾期",now:"现在",lessThanMinute:"不到一分钟",inMinutes:"{{count}} 分钟后",inHours:"{{count}} 小时后"},actions:{stopPrint:"停止打印",startPrint:"开始打印",requeue:"重新排队"},bulkEdit:{title:"编辑 {{count}} 个项目",title_plural:"编辑 {{count}} 个项目",description:"仅更改的设置将应用于所选项目。",printer:"打印机",noChange:"— 不更改 —",queueOptions:"队列选项",staged:"暂存（手动开始）",autoPowerOff:"打印后自动关机",requirePrevious:"要求前一个成功",printOptions:"打印选项",bedLevelling:"热床调平",flowCalibration:"流量校准",vibrationCalibration:"振动校准",layerInspection:"首层检查",timelapse:"延时摄影",useAms:"使用 AMS",applyChanges:"应用更改",selectAll:"全选",deselectAll:"取消全选",selected:"已选择 {{count}} 个",editSelected:"编辑所选",cancelSelected:"取消所选"},confirm:{cancelTitle:"取消排程打印",cancelMessage:'确定要取消"{{name}}"吗？',stopTitle:"停止打印",stopMessage:'确定要停止当前打印"{{name}}"吗？这将取消打印机上的打印任务。',removeTitle:"从历史中移除",removeMessage:'确定要从队列历史中移除"{{name}}"吗？',clearHistoryTitle:"清除历史",clearHistoryMessage:"确定要从历史中移除所有 {{count}} 个项目吗？",cancelButton:"取消打印",stopButton:"停止打印",thisPrint:"此打印",thisItem:"此项目"},toast:{cancelled:"队列项目已取消",cancelFailed:"取消项目失败",removed:"队列项目已移除",removeFailed:"移除项目失败",stopped:"打印已停止",stopFailed:"停止打印失败",released:"打印已释放到队列",startFailed:"开始打印失败",reorderFailed:"重新排序队列失败",historyCleared:"已清除 {{count}} 条历史记录",clearHistoryFailed:"清除历史失败",updateFailed:"更新项目失败",bulkCancelled:"已取消 {{count}} 个项目",bulkCancelFailed:"批量取消项目失败"},timeline:{listView:"列表",timelineView:"时间线",unassigned:"未分配",noData:"当天没有计划的打印任务",allDoneBy:"所有打印预计在 {{time}} 前完成",staged:"暂存",filterAll:"全部显示",filterPrinting:"打印中",filterQueued:"排队中",time:{anyMoment:"即将完成",minutesLeft:"剩余{{minutes}}分钟",hoursLeft:"剩余{{hours}}小时",hoursMinutesLeft:"剩余{{hours}}小时{{minutes}}分钟"},day:{previous:"前一天",next:"后一天",today:"今天"}},permissions:{noStopPrint:"您没有停止打印的权限",noStartPrint:"您没有开始打印的权限",noEdit:"您没有编辑此队列项目的权限",noCancel:"您没有取消此队列项目的权限",noRequeue:"您没有重新排队的权限",noRemove:"您没有移除此队列项目的权限",noClearHistory:"您没有清除所有历史的权限",noEditItems:"您没有编辑队列项目的权限",noCancelItems:"您没有取消队列项目的权限"}},backgroundDispatch:{unknownFile:"未知文件",unknownPrinter:"未知打印机",startingPrints:"正在开始打印",progressSummary:"{{complete}}/{{total}} 完成 • 已分发：{{dispatched}} • 处理中：{{processing}}",expandDetails:"展开分发详情",collapseDetails:"收起分发详情",dismissToast:"关闭分发通知",cancelDispatchJob:"取消分发任务",cancel:"取消",cancelling:"取消中…",status:{dispatched:"已分发",processing:"处理中",completed:"已完成",failed:"失败",cancelled:"已取消"},toast:{cancellingUpload:"取消上传中...",cancelled:"分发已取消",cancelFailed:"取消分发失败",completeWithFailures:"后台分发完成：{{completed}} 成功，{{failed}} 失败",completeSuccess:"后台分发完成：{{completed}} 成功",printStartedRemaining:"{{completed}} 个打印已开始，{{remaining}} 个正在发送..."}},stats:{title:"仪表板",subtitle:"拖动小部件以重新排列。点击眼睛图标隐藏。",overview:"概览",totalPrints:"总打印次数",successRate:"成功率",totalPrintTime:"总打印时间",printTime:"打印时间",totalFilament:"总耗材用量",filamentUsed:"耗材用量",filamentCost:"耗材成本",totalCost:"总成本",energyUsed:"能耗",energyCost:"能源成本",energyWarmingUpTooltip:"能耗追踪正在收集每小时快照。当所选范围之前至少存在一个快照时，时间段合计将变得准确。早期数值可能偏低。",averagePrintTime:"平均打印时间",printsPerDay:"每日打印次数",byPrinter:"按打印机",printsByPrinter:"各打印机打印次数",byMaterial:"按材料",byMonth:"按月份",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",allTime:"全部时间",quickStats:"快速统计",printActivity:"打印活动",filamentTypes:"耗材类型",filamentTrends:"耗材趋势",failureAnalysis:"失败分析",timeAccuracy:"时间准确度",successful:"成功：",failed:"失败：",perfectEstimate:"100% = 完美估计",noTimeAccuracyData:"暂无时间准确度数据",noFilamentData:"暂无耗材数据",noPrinterData:"暂无打印机数据",noPrintData:"暂无打印数据",noPrintDataLast30Days:"最近 30 天无打印数据",failureReasons:"失败原因",topFailureReasons:"主要失败原因",failedPrintsCount:"{{failed}} / {{total}} 次打印失败",lastWeekRate:"上周：{{rate}}%",resetLayout:"重置布局",recalculateCosts:"重新计算成本",recalculateCostsHint:"使用当前耗材价格重新计算所有归档成本",exportStats:"导出统计",exportAsCsv:"导出为 CSV",exportAsExcel:"导出为 Excel",hiddenCount:"{{count}} 个已隐藏",exportDownloaded:"导出已下载",exportFailed:"导出失败",layoutReset:"布局已重置",recalculatedCosts:"已为 {{count}} 个归档重新计算成本",recalculateFailed:"重新计算成本失败",loadingStats:"加载统计数据中...",noPermissionResetLayout:"您没有重置布局的权限",noPermissionRecalculate:"您没有重新计算成本的权限",noPrintDataInRange:"所选范围内无打印数据",periodFilament:"期间耗材",periodCost:"期间成本",avgPerPrint:"每次打印平均",usageOverTime:"随时间的使用量",filamentByWeight:"重量",printDuration:"打印时长",printerUtilization:"打印机利用率",filamentSuccess:"按材料成功率",printHabits:"打印习惯",printTimeOfDay:"打印时段",colorDistribution:"颜色分布",noColorData:"暂无颜色数据",records:"记录",longestPrint:"最长打印",heaviestPrint:"最重打印",mostExpensivePrint:"最贵打印",busiestDay:"最忙碌的一天",successStreak:"连续成功",streakPrint:"连续打印",streakPrints:"{{count}} 次连续打印",printerStats:"打印机统计",hours:"小时",avgPrints:"平均打印",noArchiveData:"暂无打印数据",filamentByTime:"时间",avgWeight:"平均重量",avgTime:"平均时间",filamentByPrints:"打印次数",timeframe:{today:"今天","this-week":"本周","this-month":"本月","last-7":"最近 7 天","last-30":"最近 30 天","last-90":"最近 90 天","this-year":"今年","all-time":"全部时间",custom:"自定义范围",from:"从",to:"到"},allUsers:"所有用户",noUser:"无用户（系统）",filterByUser:"按用户筛选"},maintenance:{title:"维护",overview:"概览",allOk:"所有维护均已完成",dueCount:"{{count}} 项到期",dueCount_plural:"{{count}} 项到期",warningCount:"{{count}} 个警告",warningCount_plural:"{{count}} 个警告",totalPrintTime:"总打印时间",nextMaintenance:"下次维护",nothingDue:"无到期项目",tasks:"任务",lastPerformed:"上次执行",interval:"间隔",hoursRemaining:"剩余 {{hours}} 小时",hoursOverdue:"逾期 {{hours}} 小时",markDone:"标记为完成",performMaintenance:"执行维护",history:"历史",noHistory:"无维护历史",editPrintHours:"编辑打印时间",currentHours:"当前小时数",statusTab:"状态",settingsTab:"设置",overdueCount:"{{count}} 个逾期",dueSoonCount:"{{count}} 个即将到期",dueSoon:"即将到期",allGood:"一切正常",overdueBy:"逾期 {{duration}}",dueIn:"{{duration}} 后到期",timeLeft:"剩余 {{duration}}",day:"1 天",days:"{{count}} 天",week:"1 周",weeks:"{{count}} 周",month:"1 个月",months:"{{count}} 个月",year:"1 年",maintenanceTypes:"维护类型",maintenanceTypesDescription:"系统类型和您的自定义维护任务",addCustomType:"添加自定义类型",restoreDefaults:"恢复默认任务",intervalType:"间隔类型",intervalValue:"间隔 ({{type}})",icon:"图标",documentationLink:"文档链接（可选）",assignToPrinters:"分配给打印机",selectAtLeastOnePrinter:"至少选择一台打印机",addType:"添加类型",custom:"自定义",printHours:"打印小时数",calendarDays:"日历天数",exampleName:"例如：更换 HEPA 过滤器",viewDocumentation:"查看文档",timeBasedInterval:"基于时间的间隔",intervalOverrides:"间隔覆盖",intervalOverridesDescription:"为特定打印机自定义间隔",assignedToPrinters:"已分配给打印机：",noPrintersAssigned:"未分配打印机",addPrinterShort:"添加：",printersAssignedClick:"已分配 {{count}} 台打印机 - 点击管理",removeFromPrinter:"从此打印机移除",types:{lubricateCarbonRods:"润滑碳纤维杆",lubricateRails:"润滑线性导轨",cleanNozzle:"清洁喷嘴/热端",checkBelts:"检查皮带张力",cleanBuildPlate:"清洁构建板",checkExtruder:"检查挤出机齿轮",checkCooling:"检查冷却风扇",generalInspection:"综合检查",cleanCarbonRods:"清洁碳纤维杆",lubricateSteelRods:"润滑钢杆",cleanSteelRods:"清洁钢杆",cleanLinearRails:"清洁线性导轨",checkPtfeTube:"检查 PTFE 管",replaceHepaFilter:"更换 HEPA 过滤器",replaceCarbonFilter:"更换活性炭过滤器",lubricateLeftNozzleRail:"润滑左喷嘴导轨"},maintenanceComplete:"维护已标记为完成",typeUpdated:"维护类型已更新",typeDeleted:"维护类型已删除",defaultsRestored:"已恢复 {{count}} 个默认任务",printHoursUpdated:"打印小时数已更新",printerAssigned:"打印机已分配",printerRemoved:"打印机已移除",deleteTypeConfirm:'删除"{{name}}"？',deleteSystemTypeTitle:"删除默认维护任务？",deleteSystemTypeMessage:'确定要删除默认维护任务"{{name}}"吗？',noPermissionUpdate:"您没有更新维护项目的权限",noPermissionPerform:"您没有执行维护的权限",noPermissionEditTypes:"您没有编辑维护类型的权限",noPermissionDeleteTypes:"您没有删除维护类型的权限",noPermissionEditHours:"您没有编辑打印时间的权限",noPermissionRemovePrinter:"您没有移除打印机分配的权限",noPermissionAssignPrinter:"您没有分配打印机的权限",noPermissionEditIntervals:"您没有编辑间隔的权限",configureSettings:"配置维护类型和间隔"},settings:{title:"设置",general:"通用",tabs:{general:"通用",smartPlugs:"智能插座",notifications:"通知",queue:"工作流",filament:"耗材",network:"网络",apiKeys:"API 密钥",virtualPrinter:"虚拟打印机",failureDetection:"故障检测",users:"身份验证",backup:"备份",emailAuth:"邮箱认证",ldap:"LDAP",twoFa:"双因素认证",oidc:"SSO / OIDC"},ldap:{title:"LDAP 认证",enabledDesc:"LDAP 认证已启用",disabledDesc:"LDAP 认证已禁用",disabledHint:"在下方配置并保存 LDAP 设置，然后启用。",enabled:"LDAP 认证已启用",disabled:"LDAP 认证已禁用",feature1:"用户可以使用 LDAP 凭据登录",feature2:"本地管理员帐户作为后备保留",feature3:"登录时 LDAP 组映射到 BamBuddy 组",serverConfig:"LDAP 服务器配置",serverUrl:"服务器 URL",serverUrlHint:"使用 ldap:// 进行标准连接或 ldaps:// 进行 SSL 连接",security:"安全",securityHint:"StartTLS 将普通连接升级为 TLS。LDAPS 从一开始就使用 TLS。",bindDn:"绑定 DN（服务帐户）",bindPassword:"绑定密码",searchBase:"搜索基础 DN",userFilter:"用户搜索过滤器",userFilterHint:"{username} 替换为登录用户名。OpenLDAP 使用 (uid={username})。",autoProvision:"自动创建用户",autoProvisionHint:"首次 LDAP 登录时自动创建 BamBuddy 帐户",defaultGroup:"默认组",defaultGroupNone:"— 无（无回退）—",defaultGroupHint:"当 LDAP 用户通过身份验证但不在任何已映射的 LDAP 组中时分配的回退组。留空以使未映射的用户没有权限。",groupMapping:"组映射（JSON）",groupMappingHint:"将 LDAP 组 DN 映射到 BamBuddy 组。可用组：",testConnection:"测试连接",settingsSaved:"LDAP 设置已保存",errors:{serverRequired:"LDAP 服务器 URL 为必填项",searchBaseRequired:"搜索基础 DN 为必填项",enableAuthFirst:"请先启用认证",configureLdapFirst:"请先保存 LDAP 设置"}},email:{smtpSettings:"SMTP 配置",smtpHost:"SMTP 服务器",smtpPort:"SMTP 端口",security:"安全",authentication:"认证",username:"用户名",password:"密码",fromEmail:"发件邮箱",fromName:"发件人名称",testConnection:"测试 SMTP 连接",testRecipient:"测试收件邮箱",sendTest:"发送测试邮件",sending:"发送中...",save:"保存设置",saving:"保存中...",advancedAuth:"高级认证",advancedAuthEnabled:"高级认证已启用",advancedAuthEnabledDesc:"基于邮箱的用户管理功能已激活。新用户将通过邮件收到自动生成的密码，用户可以通过忘记密码功能重置密码。",advancedAuthDisabled:"高级认证已禁用",advancedAuthDisabledDesc:"启用高级认证以激活基于邮箱的用户管理功能。",enable:"启用",disable:"禁用",feature1:"密码自动生成并通过邮件发送给新用户",feature2:"用户可以使用用户名或邮箱登录",feature3:"忘记密码功能可用",feature4:"管理员可以通过邮件重置用户密码",errors:{requiredFields:"请填写所有必填字段",usernameRequired:"启用认证时需要用户名",enterTestEmail:"请输入测试邮箱地址",smtpServerAndEmail:"测试前请填写 SMTP 服务器和发件邮箱",usernamePasswordRequired:"启用认证时需要用户名和密码",configureSmtpFirst:"请先配置并测试 SMTP 设置",enableAuthFirst:"请先启用身份验证才能使用基于电子邮件的功能。"},success:{settingsSaved:"SMTP 设置保存成功"},securityOptions:{starttls:"STARTTLS（端口 587）",ssl:"SSL/TLS（端口 465）",none:"无（端口 25）"},authOptions:{enabled:"已启用",disabled:"已禁用"}},appearance:"外观",notifications:"通知",smartPlugs:"智能插座",spoolman:"Spoolman",updates:"更新",language:"语言",languageDescription:"选择您的首选语言",theme:"主题",themeLight:"浅色",themeDark:"深色",themeSystem:"跟随系统",defaultView:"默认视图",defaultViewDescription:"打开应用时显示的页面",checkForUpdates:"检查更新",autoUpdate:"自动更新",currentVersion:"当前版本",latestVersion:"最新版本",upToDate:"已是最新版本",updateAvailable:"有可用更新",notificationLanguage:"通知语言",notificationLanguageDescription:"推送通知的语言",bedCooledThreshold:"热床冷却阈值",bedCooledThresholdDescription:"打印后热床被视为已冷却的温度",userNotificationsEnabled:"用户通知",userNotificationsEnabledDescription:"启用用户通知菜单和打印任务事件的邮件通知。需要高级身份验证。",userNotificationsDisabledHint:"请启用高级身份验证以使用用户通知。",notificationProviders:"通知提供商",addProvider:"添加提供商",editProvider:"编辑提供商",providerType:"提供商类型",testNotification:"测试通知",testSuccess:"测试通知发送成功",testFailed:"发送测试通知失败",quietHours:"免打扰时间",quietHoursDescription:"在此时间段内不发送通知",quietHoursStart:"开始",quietHoursEnd:"结束",events:{title:"通知事件",printStart:"打印开始",printComplete:"打印完成",printFailed:"打印失败",printStopped:"打印停止",printProgress:"进度里程碑",printProgressDescription:"在 25%、50%、75% 时通知",printerOffline:"打印机离线",printerError:"打印机错误",filamentLow:"耗材不足",maintenanceDue:"维护到期",maintenanceDueDescription:"需要维护时通知"},smartPlug:{title:"智能插座",add:"添加智能插座",edit:"编辑智能插座",name:"名称",ipAddress:"IP 地址",linkedPrinter:"关联打印机",autoOn:"自动开启",autoOnDescription:"打印开始时开启",autoOff:"自动关闭",autoOffDescription:"打印完成后关闭",offDelay:"关闭延迟",offDelayMinutes:"打印后分钟数",offDelayTemp:"当喷嘴温度低于",currentState:"当前状态",turnOn:"开启",turnOff:"关闭"},filamentTracking:"耗材追踪",filamentTrackingDesc:"选择如何追踪您的耗材。您可以使用内置库存或连接外部 Spoolman 服务器。",filamentChecks:"耗材检查",disableFilamentWarnings:"禁用耗材警告",disableFilamentWarningsDesc:"在打印或加入队列时不显示耗材不足警告",preferLowestFilament:"优先使用剩余最少的耗材",preferLowestFilamentDesc:"当多个料盘匹配时，使用剩余耗材最少的那个",trackingModeBuiltIn:"内置库存",trackingModeBuiltInDesc:"包含 RFID 自动匹配和用量追踪",trackingModeSpoolmanDesc:"外部耗材管理服务器",builtInFeatureRfid:"自动检测 AMS 中的拓竹 RFID 耗材",builtInFeatureUsage:"追踪每次打印的耗材消耗",builtInFeatureCatalog:"管理耗材、颜色和 K 值配置文件",builtInFeatureThirdParty:"第三方耗材可分配到库存耗材",amsSyncButton:"从 AMS 同步重量",amsSyncTitle:"从 AMS 同步耗材重量",amsSyncMessage:"这将使用已连接打印机的当前 AMS 剩余百分比值覆盖所有库存耗材重量。用于从损坏的重量数据中恢复。打印机必须在线。",amsSyncing:"同步中...",amsSyncSuccess:"已同步 {{synced}} 个耗材，跳过 {{skipped}} 个",amsSyncError:"从 AMS 同步重量失败",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman 服务器的 URL（例如 http://localhost:7912）",spoolmanConnected:"已连接",spoolmanDisconnected:"未连接",status:"状态",connect:"连接",disconnect:"断开",howSyncWorks:"同步工作原理",syncInfoRfidOnly:"仅同步带有 RFID 的官方拓竹耗材",syncInfoAutoCreate:"首次同步时自动在 Spoolman 中创建新耗材",syncInfoThirdPartySkipped:"非拓竹耗材（第三方、重新填充的）将被跳过",linkingExistingSpools:"链接现有耗材",linkingExistingSpoolsDesc:'要将现有的 Spoolman 耗材链接到您的 AMS，请将鼠标悬停在 AMS 槽位上并点击"链接到 Spoolman"。',syncMode:"同步模式",syncModeAuto:"自动",syncModeManual:"仅手动",syncModeAutoDesc:"检测到更改时自动同步 AMS 数据",syncModeManualDesc:"仅在手动触发时同步",syncAmsData:"同步 AMS 数据",syncAmsDataDesc:"手动将打印机 AMS 数据同步到 Spoolman",allPrinters:"所有打印机",noDefaultPrinter:"无默认（每次询问）",sidebarOrder:"侧边栏顺序",saveThumbnails:"保存缩略图",captureFinishPhoto:"拍摄完成照片",noPrintersConfigured:"未配置打印机",archiveMode:{always:"始终创建归档条目",never:"从不创建归档条目",ask:"每次询问"},checkForUpdatesLabel:"检查更新",checkPrinterFirmware:"检查打印机固件",includeBetaUpdates:"包含测试版本",includeBetaUpdatesDesc:"检查更新时通知测试版和预发布版本",enableRetry:"启用重试",homeAssistantDescription:"通过 Home Assistant 控制智能插座",environmentManagedLabel:"（环境变量管理）",autoEnabledViaEnv:"通过环境变量自动启用",urlFromEnvReadOnly:"值由 HA_URL 环境变量设置（只读）",tokenFromEnvReadOnly:"值由 HA_TOKEN 环境变量设置（只读）",mqttConnectedTo:"已连接到",prometheusDescription:"以 Prometheus 格式暴露打印机数据",noSmartPlugsTitle:"未配置智能插座",noSmartPlugsDescription:"添加基于 Tasmota 的智能插座以追踪能耗并自动化电源控制。",noProvidersTitle:"未配置提供商",noProvidersDescription:"添加提供商以接收警报。",noTemplatesAvailable:"无可用模板。重启后端以加载默认模板。",apiPermissionView:"查看打印机状态和队列",apiPermissionEdit:"添加和移除打印队列中的项目",apiKeysEmptyTitle:"无 API 密钥",apiKeysEmptyDescription:"创建 API 密钥以与外部服务集成。",noUsersFound:"未找到用户",noGroupsFound:"未找到组",noGroupsAvailable:"无可用组",passwordsDoNotMatch:"密码不匹配",systemGroupWarning:"系统组名称不可更改",authDisabledTitle:"身份验证已禁用",authDisabledFeature1:"需要登录才能访问系统",authDisabledFeature2:"创建多个用户并基于组的权限管理",authDisabledFeature3:"使用 50+ 个细粒度权限控制访问",userHasCreated:"此用户已创建：",userItemsQuestion:"您想如何处理这些项目？",deleteUserConfirm:"确定要删除此用户吗？",actionCannotBeUndone:"此操作无法撤销。",addFirstSmartPlug:"添加您的第一个智能插座",providers:"提供商",log:"日志",testAll:"全部测试",testResults:"测试结果",testPassedCount:"{{count}} 个通过",testFailedCount:"{{count}} 个失败",messageTemplates:"消息模板",messageTemplatesDescription:"自定义每个事件的通知消息。",apiKeys:"API 密钥",apiKeysDescription:"创建 API 密钥用于外部集成和 Webhook。",createKey:"创建密钥",apiKeyCreated:"API 密钥创建成功",apiKeyCopyWarning:"请立即复制此密钥 - 它不会再次显示！",useInApiBrowser:"在 API 浏览器中使用",createNewApiKey:"创建新 API 密钥",keyName:"密钥名称",keyNamePlaceholder:"例如：Home Assistant、OctoPrint",readStatus:"读取状态",readStatusDescription:"查看打印机状态和队列",manageQueue:"管理队列",manageQueueDescription:"添加和移除打印队列中的项目",controlPrinter:"控制打印机",controlPrinterDescription:"暂停、继续和停止打印",unnamedKey:"未命名密钥",lastUsed:"上次使用",read:"读取",control:"控制",createFirstKey:"创建您的第一个密钥",webhookEndpoints:"Webhook 端点",webhookApiKeyHint:"在 X-API-Key 请求头中使用您的 API 密钥。",webhook:{getAllStatus:"获取所有打印机状态",getSpecificStatus:"获取特定打印机状态",addToQueue:"添加到打印队列",pausePrint:"暂停打印",resumePrint:"继续打印",stopPrint:"停止打印"},apiBrowser:"API 浏览器",apiBrowserDescription:"浏览和测试所有可用的 API 端点。",apiKeyForTesting:"测试用 API 密钥",apiKeyPlaceholder:"在此粘贴您的 API 密钥以测试需要认证的端点...",apiKeyHint:"此密钥将作为 X-API-Key 请求头随请求发送。",deleteApiKeyTitle:"删除 API 密钥",deleteApiKeyMessage:"确定要删除此 API 密钥吗？使用此密钥的所有集成将停止工作。",deleteKey:"删除密钥",amsDisplayThresholds:"AMS 显示阈值",amsThresholdsDescription:"配置 AMS 湿度和温度指示器的颜色阈值。",humidity:"湿度",goodGreen:"良好（绿色）",fairOrange:"一般（橙色）",aboveFairBad:"超过一般阈值显示为红色（差）",fairAlsoDryingThreshold:"此阈值也用于触发自动干燥",temperature:"温度",goodBlue:"良好（蓝色）",aboveFairHot:"超过一般阈值显示为红色（热）",historyRetention:"历史保留",keepSensorHistory:"保留传感器历史",historyRetentionDescription:"较旧的湿度和温度数据将被自动删除",defaultPrintOptions:"默认打印选项",defaultPrintOptionsDescription:"设置新打印的默认选项值。可在打印对话框中逐次覆盖。",defaultBedLevelling:"热床调平",defaultBedLevellingDesc:"打印前自动调平热床",defaultFlowCali:"流量校准",defaultFlowCaliDesc:"校准挤出流量",defaultVibrationCali:"振动校准",defaultVibrationCaliDesc:"减少振纹伪影",defaultLayerInspect:"首层检测",defaultLayerInspectDesc:"AI首层检测",defaultTimelapse:"延时摄影",defaultTimelapseDesc:"录制延时摄影视频",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"热床清空确认",requirePlateClear:"需要热床清空确认",requirePlateClearDescription:"启用后，调度器会在已完成打印的打印机上启动排队打印之前，等待每台打印机的热床清空确认。对于物理验证热床的农场工作流，请禁用此选项。",gcodeInjection:"G-code注入",gcodeInjectionDescription:'为Farmloop、SwapMod、AutoClear和Printflow 3D等自动打印系统配置自定义G-code，在打印开始和/或结束时注入。代码片段按打印机型号配置，在队列项目上启用"注入G-code"时应用。',gcodeInjectionNoPrinters:"未找到打印机。添加打印机以配置G-code代码片段。",gcodeStartLabel:"开始G-code",gcodeEndLabel:"结束G-code",gcodeStartPlaceholder:"在打印开始前插入的G-code...",gcodeEndPlaceholder:"在打印结束后追加的G-code...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"自动干燥",queueDryingDescription:"在队列打印之间，打印机空闲时自动干燥AMS耗材。使用上方的湿度阈值触发干燥。",queueDryingEnabled:"启用自动干燥",queueDryingEnabledDescription:"当打印机空闲且湿度超过阈值时，自动启动AMS干燥",queueDryingBlock:"等待干燥完成",queueDryingBlockDescription:"阻止打印队列直到干燥完成。关闭时，打印优先于干燥。",ambientDryingEnabled:"环境干燥",ambientDryingEnabledDescription:"当空闲打印机的湿度超过阈值时自动干燥耗材，无需排队打印。",dryingPresets:"干燥预设",dryingPresetsDescription:"每种耗材类型的温度和时长。AMS 2 Pro使用较低温度，AMS-HT支持较高温度。",dryingFilament:"耗材",printModal:"打印对话框",expandCustomMapping:"默认展开自定义映射",expandCustomMappingDescription:"打印到多台打印机时，默认展开显示每台打印机的 AMS 映射",authentication:"身份验证",authEnabledDescription:"您的实例已通过用户身份验证保护",authDisabledDescription:"启用以要求登录并管理用户访问",authDisabledMessage:"启用身份验证以创建用户账户、管理权限并保护您的 Bambuddy 实例。",enableAuthentication:"启用身份验证",currentUser:"当前用户",changePassword:"修改密码",admin:"管理员",users:"用户",addUser:"添加用户",groups:"组",addGroup:"添加组",system:"系统",noDescription:"无描述",userCount:"{{count}} 个用户",permissionCount:"{{count}} 个权限",createUser:"创建用户",username:"用户名",enterUsername:"输入用户名",password:"密码",enterPassword:"输入密码（至少 6 个字符）",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认密码",viewReleaseOnGitHub:"在 GitHub 上查看发布",turnAllPlugsOn:"开启所有插座",turnAllPlugsOff:"关闭所有插座",clearNotificationLogs:"清除通知日志",clearLogsMessage:"这将永久删除所有 30 天前的通知日志。此操作无法撤销。",clearLogs:"清除日志",resetUiPreferences:"重置 UI 偏好",resetUiPreferencesMessage:"这将重置所有 UI 偏好为默认值：侧边栏顺序、主题、仪表板布局、视图模式和排序偏好。您的打印机、归档和服务器设置不会受到影响。清除后页面将重新加载。",resetPreferences:"重置偏好",deleteGroupTitle:"删除组",deleteGroupMessage:"确定要删除此组吗？此组中的用户将失去这些权限。",deleteGroup:"删除组",disableAuthenticationTitle:"禁用身份验证",disableAuthenticationMessage:"确定要禁用身份验证吗？这将使您的 Bambuddy 实例无需登录即可访问。所有用户将保留在数据库中但身份验证将被禁用。",disableAuthentication:"禁用身份验证",configureBambuddy:"配置 Bambuddy",systemDefault:"系统默认",archiveSettings:"归档设置",newWindow:"新窗口",embeddedOverlay:"嵌入式叠加层",preferredSlicer:"首选切片软件",preferredSlicerDescription:"选择要用于打开文件的切片软件",externalCameras:"外部摄像头",costTracking:"成本追踪",printsOnly:"仅打印",totalConsumption:"总消耗",dataManagement:"数据管理",storageUsage:"存储使用情况",storageUsageDescription:"按类别的数据使用情况明细",storageUsageTotal:"总计",storageUsageErrors:"错误",storageUsageOtherBreakdown:"其他（包括静态资源、脚本和配置文件）",storageUsageSystem:"系统",storageUsageData:"数据",storageUsageUnavailable:"存储使用信息不可用",clearNotificationLogsDescription:"删除 30 天前的通知日志",resetUiPreferencesDescription:"重置侧边栏顺序、主题、视图模式和布局偏好。打印机、归档和设置不受影响。",enableHomeAssistant:"启用 Home Assistant",enableMqtt:"启用 MQTT",useTls:"使用 TLS",enableMetricsEndpoint:"启用指标端点",availableMetrics:"可用指标",editUser:"编辑用户",deleteUserTitle:"删除用户",groupName:"组名称",leaveEmptyForAnonymous:"留空为匿名",leaveEmptyForNoAuth:"留空为无认证",enterNewPassword:"输入新密码",confirmNewPassword:"确认新密码",enterGroupName:"输入组名称",enterDescriptionOptional:"输入描述（可选）",enterCurrentPassword:"输入当前密码",enterNewPasswordMin6:"输入新密码（至少 6 个字符）",toast:{keyCopied:"密钥已复制到剪贴板",copyFailed:"复制密钥失败",keyAddedToBrowser:"密钥已添加到 API 浏览器",clearLogsFailed:"清除日志失败",uiPreferencesReset:"UI 偏好已重置。刷新中...",authDisabled:"身份验证已成功禁用",authDisableFailed:"禁用身份验证失败",apiKeyCreated:"API 密钥已创建",apiKeyDeleted:"API 密钥已删除",userCreated:"用户创建成功",userUpdated:"用户更新成功",userDeleted:"用户删除成功",groupCreated:"组创建成功",groupUpdated:"组更新成功",groupDeleted:"组删除成功",fillRequiredFields:"请填写所有必填字段",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符",enterGroupName:"请输入组名称",settingsSaved:"设置已保存",cameraSettingsSaved:"摄像头设置已保存",enterCameraUrl:"请输入摄像头 URL",passwordChanged:"密码修改成功",connectionFailed:"连接失败",testFailed:"测试失败",cameraConnected:"摄像头已连接{{resolution}}"},testConnection:"测试连接",catalog:{spoolCatalog:"耗材目录",spoolCatalogDescription:"按品牌/类型的空耗材重量。用于添加耗材时的自动重量查找。",searchCatalog:"搜索目录...",addNewEntry:"添加新条目",namePlaceholder:"名称（例如：Bambu Lab - 塑料）",weight:"重量",type:"类型",default:"默认",custom:"自定义",noMatch:"没有条目匹配您的搜索",empty:"目录中没有条目",deleteEntry:"删除条目",deleteConfirm:'确定要删除"{{name}}"吗？',resetCatalog:"重置目录",resetConfirm:"重置目录为默认值？这将移除所有自定义条目。",loadFailed:"加载耗材目录失败",nameWeightRequired:"名称和重量为必填项",entryAdded:"条目已添加",addFailed:"添加条目失败",entryUpdated:"条目已更新",updateFailed:"更新条目失败",entryDeleted:"条目已删除",deleteFailed:"删除条目失败",resetSuccess:"目录已重置为默认值",resetFailed:"重置目录失败",exported:"已导出 {{count}} 条",imported:"已导入 {{added}} 条（跳过 {{skipped}} 条）",importFailed:"导入失败：无效的 JSON 格式",exportTooltip:"导出目录为 JSON",importTooltip:"从 JSON 导入目录",resetTooltip:"重置为默认值",selectedCount:"已选择 {{count}} 项",deleteSelected:"删除所选",bulkDeleteConfirm:"确定要删除 {{count}} 个条目吗？",bulkDeleted:"已删除 {{count}} 个条目",bulkDeleteFailed:"删除条目失败"},colorCatalog:{title:"颜色目录",description:"按制造商/材料的耗材颜色。用于添加耗材时的自动颜色查找。",searchColors:"搜索颜色...",allManufacturers:"所有制造商",addNewColor:"添加新颜色",manufacturer:"制造商",colorName:"颜色名称",hex:"十六进制",materialOptional:"材料（可选）",showing:"显示 {{filtered}} / {{total}} 种颜色",noMatch:"没有颜色匹配您的搜索",empty:"目录中没有颜色",deleteColor:"删除颜色",deleteConfirm:'确定要删除"{{name}}"吗？',resetCatalog:"重置颜色目录",resetConfirm:"重置目录为默认值？这将移除所有自定义颜色。",sync:"同步",starting:"启动中...",syncTooltip:"从 FilamentColors.xyz 同步（2000+ 种颜色，可能需要一分钟）",loadFailed:"加载颜色目录失败",fieldsRequired:"制造商、颜色名称和十六进制颜色为必填项",colorAdded:"颜色已添加",addFailed:"添加颜色失败",colorUpdated:"颜色已更新",updateFailed:"更新颜色失败",colorDeleted:"颜色已删除",deleteFailed:"删除颜色失败",resetSuccess:"颜色目录已重置为默认值",resetFailed:"重置目录失败",syncUpToDate:"已是最新（检查了 {{count}} 种颜色）",syncComplete:"添加了 {{added}} 种新颜色（{{skipped}} 种已存在）",syncError:"同步错误",syncFailed:"从 FilamentColors.xyz 同步失败",exported:"已导出 {{count}} 种颜色",imported:"已导入 {{added}} 种颜色（跳过 {{skipped}} 种）",importFailed:"导入失败：无效的 JSON 格式",selectedCount:"已选择 {{count}} 项",deleteSelected:"删除所选",bulkDeleteConfirm:"确定要删除 {{count}} 种颜色吗？",bulkDeleted:"已删除 {{count}} 种颜色",bulkDeleteFailed:"删除颜色失败"},dateFormat:"日期格式",dateFormatUs:"美式 (MM/DD/YYYY)",dateFormatEu:"欧式 (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"时间格式",timeFormat12:"12小时制 (3:30 PM)",timeFormat24:"24小时制 (15:30)",defaultPrinter:"默认打印机",defaultPrinterDescription:"为上传、重印和其他操作预选此打印机。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"拖拽侧边栏项目以重新排序。在此处重置为默认顺序。",setDefault:"设为默认",sidebarOrderSetDefaultHint:"设为默认将当前菜单顺序应用于尚未自定义的用户。",sidebarDefaultSet:"已设置默认菜单顺序。",sidebarDefaultCleared:"已清除默认菜单顺序。",sidebarDefaultFailed:"设置默认菜单顺序失败。",reset:"重置",darkMode:"深色模式",lightMode:"浅色模式",active:"(当前)",background:"背景",accent:"强调色",style:"样式",bgNeutral:"中性",bgWarm:"暖色",bgCool:"冷色",bgOled:"OLED 纯黑",bgSlate:"石板蓝",bgForest:"森林绿",accentGreen:"绿色",accentTeal:"青色",accentBlue:"蓝色",accentOrange:"橙色",accentPurple:"紫色",accentRed:"红色",styleClassic:"经典",styleGlow:"发光",styleVibrant:"鲜艳",themeToggleHint:"使用侧边栏中的太阳/月亮图标在深色和浅色模式之间切换。",autoArchivePrints:"自动归档打印",autoArchiveDescription:"打印完成时自动保存3MF文件",saveThumbnailsDescription:"从3MF文件中提取并保存预览图像",captureFinishPhotoDescription:"打印完成时从打印机摄像头拍照",ffmpegNotInstalled:"未安装ffmpeg",ffmpegRequired:"摄像头捕获需要ffmpeg。通过 brew install ffmpeg（macOS）或 apt install ffmpeg（Linux）安装。",camera:"摄像头",cameraViewMode:"摄像头查看模式",cameraOverlayDescription:"摄像头在主屏幕上以可调大小的覆盖层打开",cameraWindowDescription:"摄像头在单独的浏览器窗口中打开",externalCamerasDescription:"配置外部摄像头以替换内置打印机摄像头。支持MJPEG流、RTSP、HTTP快照和USB摄像头（V4L2）。启用后，外部摄像头将用于实时查看和完成照片。",cameraPlaceholderUsb:"设备路径 (/dev/video0)",cameraPlaceholderUrl:"摄像头URL (rtsp://... 或 http://...)",cameraTypeMjpeg:"MJPEG 流",cameraTypeRtsp:"RTSP 流",cameraTypeSnapshot:"HTTP 快照",cameraTypeUsb:"USB 摄像头 (V4L2)",cameraRotation:"旋转",test:"测试",connected:"已连接",disconnected:"未连接",currency:"货币",defaultFilamentCost:"默认耗材成本（每公斤）",electricityCost:"每千瓦时电费",energyDisplayMode:"能源显示模式",energyModePrintDescription:"仪表板显示打印期间使用的能源总和",energyModeTotalDescription:"仪表板显示智能插座的累计能源",fileManager:"文件管理器",createArchiveEntry:"打印时创建归档条目",createArchiveEntryDescription:"从文件管理器打印时，可选择创建归档条目",lowDiskSpaceWarning:"磁盘空间不足警告",lowDiskSpaceDescription:"当可用磁盘空间低于此阈值时显示警告",printerFirmware:"打印机固件",checkFirmwareDescription:"检查Bambu Lab的打印机固件更新",bambuddySoftware:"Bambuddy 软件",autoCheckDescription:"启动时自动检查新版本",checkNow:"立即检查",updateAvailableVersion:"可用更新：v{{version}}",releaseNotes:"发布说明",updateViaDocker:"通过 Docker Compose 更新：",installUpdate:"安装更新",latestVersionRunning:"您正在运行最新版本",failedToCheckUpdates:"检查更新失败：{{error}}",backupRestore:"备份与恢复",backupRestoreDescription:"导出/导入设置并配置GitHub备份",goToBackup:"前往备份",externalUrl:"外部URL",externalUrlDescription:"Bambuddy可访问的外部URL。用于通知图像和外部集成。",bambuddyUrl:"Bambuddy URL",externalUrlHint:"包含协议和端口（例如：http://192.168.1.100:8000）",ftpRetry:"FTP重试",ftpRetryDescription:"当打印机WiFi不稳定时重试FTP操作。适用于3MF下载、打印上传、延时摄影下载和固件更新。",autoRetryDescription:"自动重试失败的FTP操作",retryAttempts:"重试次数",retryDelay:"重试延迟",connectionTimeout:"连接超时",time_one:"{{count}}次",time_other:"{{count}}次",second_one:"{{count}}秒",second_other:"{{count}}秒",nSeconds:"{{count}}秒",increaseForWeakWifi:"对WiFi信号弱的打印机增加此值",homeAssistant:"Home Assistant",homeAssistantFullDescription:"连接到Home Assistant，通过HA REST API控制智能插座。支持switch、light、input_boolean和script实体。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"长期访问令牌",haTokenHint:"在HA中创建令牌：个人资料 → 长期访问令牌 → 创建令牌",connectionSuccessful:"连接成功",connectionFailed:"连接失败",haConnectionSuccess:"已成功连接到Home Assistant。",haConnectionFailed:"连接Home Assistant失败。",mqttPublishing:"MQTT发布",mqttDescription:"将BamBuddy事件发布到外部MQTT代理，用于与Node-RED、Home Assistant和其他自动化系统集成。",mqttEnableDescription:"向外部MQTT代理发布事件",brokerHostname:"代理主机名",port:"端口",usernameOptional:"用户名（可选）",passwordOptional:"密码（可选）",topicPrefix:"主题前缀",topicPrefixHint:"主题格式：{{prefix}}/printers//status 等",prometheusMetrics:"Prometheus 指标",prometheusEndpointDescription:"在 /api/v1/metrics 公开打印机指标，用于Prometheus/Grafana监控。",bearerTokenOptional:"Bearer令牌（可选）",bearerTokenHint:"设置后，请求必须包含 Authorization: Bearer ",metricsConnectionStatus:"连接状态",metricsPrinterState:"打印机状态（空闲/打印中等）",metricsPrintProgress:"打印进度 0-100%",metricsBedTemp:"热床温度",metricsNozzleTemp:"喷嘴温度",metricsPrintsTotal:"按结果分类的总打印数",metricsMore:"...以及更多（层数、风扇、队列、耗材用量）",smartPlugsDescription:"连接智能插座（Tasmota或Home Assistant）以自动化电源控制并跟踪打印机的能源使用情况。",allOn:"全部开启",allOff:"全部关闭",addSmartPlug:"添加智能插座",energySummary:"能源概要",currentPower:"当前功率",plugsOnline:"{{reachable}}/{{total}} 个插座在线",today:"今天",yesterday:"昨天",total:"总计",enablePlugsForSummary:"启用插座以查看能源概要",addNotificationProvider:"添加",systemBadge:"(系统)",creating:"创建中...",changing:"修改中...",deleteUserAndItems:"删除用户及其所有项目",deleteUserKeepItems:"删除用户，保留项目（将变为无主项目）",ok:"确定",twoFa:{totpTitle:"身份验证器应用 (TOTP)",totpDesc:"使用 Google Authenticator、Aegis 或 Authy 等应用。",emailOtpTitle:"邮件 OTP",emailOtpDesc:"登录时向 {{email}} 发送一次性验证码。",emailOtpNoEmail:"请先为账户添加邮箱地址以启用此方式。",addEmailFirst:"您的账户没有邮箱地址，请联系管理员添加。",setupTotp:"设置身份验证器应用",setupAuthApp:"设置身份验证器应用",setupInstructions:"使用身份验证器应用扫描二维码，然后输入验证码确认。",manualEntry:"无法扫描？请手动输入此密钥：",scannedContinue:"已扫描 — 继续",enterCodeToConfirm:"请输入身份验证器应用中的6位验证码以确认设置。",activate:"激活",disableTotp:"停用身份验证器",disableConfirmHint:"请输入有效的 TOTP 码或备用码来停用身份验证器。",totpDisabled:"身份验证器应用已停用。",emailOtpEnabled:"邮件 OTP 已启用。",emailOtpDisabled:"邮件 OTP 已停用。",smtpRequired:"请先配置并测试SMTP设置。",invalidCode:"无效验证码，请重试。",enableEmailOtp:"启用邮件 OTP",disableEmailOtp:"停用邮件 OTP",emailSetupEnterCode:"验证码已发送至您的邮箱地址。请在下方输入以确认您拥有此邮箱。",verifyAndEnable:"验证并启用",emailDisablePasswordHint:"请输入您的账户密码以确认停用邮件 OTP。",passwordPlaceholder:"输入您的密码",backupCodesTitle:"保存备用码",backupCodesWarning:"请将这些码保存在安全的地方。每个码只能使用一次，且不会再次显示。",backupCodesRemaining:"剩余 {{count}} 个备用码",savedCodes:"已保存",regenBackup:"重新生成备用码",regenBackupHint:"输入当前 TOTP 码以生成 10 个新备用码，所有现有备用码将失效。",newBackupCodes:"新备用码",linkedAccounts:"已关联的 SSO 账户",linkedAccountsDesc:"以下外部身份提供商已与您的账户关联。",oidcUnlinked:"账户已解除关联。"},oidc:{title:"SSO / OIDC 提供商",desc:"配置 OpenID Connect 提供商以实现单点登录。",addProvider:"添加提供商",newProvider:"新提供商",empty:"尚未配置 OIDC 提供商。",created:"提供商已创建。",updated:"提供商已更新。",deleted:"提供商已删除。",deleteTitle:"删除提供商",deleteMessage:'删除"{{name}}"？所有关联账户将断开连接。',form:{name:"显示名称",issuerUrl:"颁发者 URL",clientId:"客户端 ID",clientSecret:"客户端密钥",scopes:"作用域",iconUrl:"图标 URL（可选）",enabled:"已启用",autoCreate:"自动创建用户",autoCreateDesc:"首次登录时自动创建本地账户。",autoLink:"自动关联已有账户",autoLinkDesc:"首次登录时通过邮箱匹配现有本地账户并自动关联。",secretHint:"留空以保留当前",secretPlaceholder:"新密钥"}}},notification:{printStarted:{title:"打印已开始",body:"{{printer}}：{{filename}} 已开始打印"},printCompleted:{title:"打印已完成",body:"{{printer}}：{{filename}} 已成功完成"},printFailed:{title:"打印失败",body:"{{printer}}：{{filename}} 打印失败"},printStopped:{title:"打印已停止",body:"{{printer}}：{{filename}} 已停止"},printProgress:{title:"打印进度",body:"{{printer}}：{{filename}} 已完成 {{percent}}%"},printerOffline:{title:"打印机离线",body:"{{printer}} 已离线"},printerError:{title:"打印机错误",body:"{{printer}}：{{error}}"},filamentLow:{title:"耗材不足",body:"{{printer}}：耗材即将用完"},maintenanceDue:{title:"维护到期",body:"{{printer}}：{{items}} 需要关注"}},errors:{generic:"出了点问题",networkError:"网络错误。请检查您的连接。",notFound:"未找到",unauthorized:"未授权",serverError:"服务器错误",validationError:"请检查您的输入",printerConnectionFailed:"连接打印机失败",saveFailed:"保存更改失败",deleteFailed:"删除失败",loadFailed:"加载数据失败"},hmsErrors:{title:"错误 - {{name}}",noErrors:"无错误",viewOnWiki:"在拓竹 Wiki 上查看",clearInstructions:"在打印机上清除错误以在此处消除它们。",clearErrors:"清除错误",clearSuccess:"HMS 错误已清除",clearFailed:"清除 HMS 错误失败"},mqttDebug:{title:"MQTT 调试日志",searchPlaceholder:"搜索主题或负载...",noMessages:"尚未记录消息",startLoggingHint:'点击"开始记录"以开始捕获 MQTT 消息',noMessagesMatch:"没有消息匹配您的筛选条件",adjustFilterHint:"尝试调整您的搜索或筛选条件",incoming:"传入",outgoing:"传出",loggingStopped:"记录已停止",loggingActive:"记录中 - 消息将自动刷新",startLogging:"开始记录",stopLogging:"停止记录",clearLog:"清除日志",topic:"主题",timestamp:"时间戳",direction:"方向",all:"全部"},printerFiles:{title:"文件管理器",storageUsed:"已用：",storageFree:"剩余：",filterPlaceholder:"筛选文件...",deleteButton:"删除",deleteFiles:"删除 {{count}} 个文件",deleteFileConfirm:'删除"{{name}}"？此操作无法撤销。',deleteFilesConfirm:"删除 {{count}} 个选中的文件？此操作无法撤销。",noFiles:"打印机上没有文件",loadingFiles:"加载文件中...",failedToLoad:"加载文件失败",toast:{filesDeleted:"已删除 {{count}} 个文件",deleteFailed:"删除失败：{{error}}"}},confirm:{delete:"确定要删除吗？",unsavedChanges:"您有未保存的更改。确定要离开吗？",clearQueue:"确定要清空队列吗？"},login:{title:"Bambuddy 登录",subtitle:"登录您的账户",username:"用户名",usernamePlaceholder:"输入您的用户名",usernameOrEmail:"用户名或邮箱",usernameOrEmailPlaceholder:"用户名或 @ 邮箱",password:"密码",passwordPlaceholder:"输入您的密码",signIn:"登录",signingIn:"登录中...",forgotPassword:"忘记密码？",loginSuccess:"登录成功",loginFailed:"登录失败",enterCredentials:"请输入用户名和密码",enterEmail:"请输入您的电子邮件地址",oidcLoginFailed:"OIDC 登录失败",oidcErrors:{providerError:"身份提供商返回了一个错误",missingParameters:"OIDC 回调缺少必要参数",invalidState:"OIDC 状态无效或已被使用",stateExpired:"OIDC 登录会话已过期，请重试",providerNotFound:"未找到 OIDC 提供商",discoveryFailed:"无法获取 OIDC 发现文档",invalidDiscovery:"OIDC 发现文档无效",networkError:"OIDC 令牌交换时出现网络错误",badResponse:"OIDC 令牌交换时收到意外响应",noIdToken:"OIDC 提供商未返回 ID 令牌",validationFailed:"OIDC 令牌验证失败",nonceMismatch:"OIDC nonce 不匹配，可能存在重放攻击",missingSubClaim:"OIDC 令牌缺少 sub 声明",noLinkedAccount:"没有与此 OIDC 身份关联的本地帐户",accountInactive:"您的帐户已被停用",userResolutionFailed:"无法解析您的帐户",internalError:"OIDC 登录过程中发生内部错误",tokenExchangeFailed:"OIDC 令牌交换失败"},forgotPasswordTitle:"忘记密码",forgotPasswordMessage:"如果您忘记了密码，请联系系统管理员进行重置。",forgotPasswordEmailMessage:"输入您的邮箱地址，我们将向您发送新密码。",emailAddress:"邮箱地址",emailPlaceholder:"your.email@example.com",cancel:"取消",sending:"发送中...",sendResetEmail:"发送重置邮件",howToReset:"如何重置密码：",resetStep1:"联系您的 Bambuddy 管理员",resetStep2:"请他们在用户管理中重置您的密码",resetStep3:"他们可以为您设置一个临时密码",resetStep4:"使用新密码登录并在设置中修改密码",gotIt:"知道了",twoFA:{title:"两步验证",subtitle:"您的账户已启用两步验证。请在下方输入验证码。",methodAuthenticator:"身份验证器应用",methodEmail:"邮箱验证码",methodBackup:"备用恢复码",instructionsTotp:"请打开您的身份验证器应用，输入 Bambuddy 的 6 位验证码。",instructionsEmail:"6 位验证码已发送至您的邮箱，有效期为 10 分钟。",instructionsEmailNotSent:"点击下方按钮，通过邮件获取验证码。",instructionsBackup:"请输入您的一个 8 位备用恢复码。每个恢复码只能使用一次。",sendCodeButton:"发送邮箱验证码",sendingCode:"发送中...",resendCode:"重新发送验证码",codeLabel:"验证码",backupCodeLabel:"备用恢复码",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"验证",verifyingButton:"验证中...",backToLogin:"← 返回登录页面",orContinueWith:"或通过以下方式登录",signInWith:"使用 {{provider}} 登录",enterCode:"请输入验证码",sendCodeFailed:"验证码发送失败",invalidCode:"无效验证码，请重试。"}},setup:{title:"Bambuddy 设置",subtitle:"为您的 Bambuddy 实例配置身份验证",enableAuth:"启用身份验证",adminAccount:"管理员账户",adminAccountDesc:"如果管理员用户已存在，将使用现有管理员账户启用身份验证。如需使用现有管理员，请将下方字段留空，或输入新凭据创建新管理员用户。",adminUsername:"管理员用户名",adminPassword:"管理员密码",optionalIfAdminExists:"（如管理员用户已存在则为可选）",adminUsernamePlaceholder:"输入管理员用户名（可选）",adminPasswordPlaceholder:"输入管理员密码（可选）",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认管理员密码",settingUp:"设置中...",completeSetup:"完成设置",toast:{authEnabledAdminCreated:"身份验证已启用并创建了管理员用户",authEnabledExistingAdmins:"使用现有管理员用户启用了身份验证",setupCompleted:"设置完成",enterBothCredentials:"请输入管理员用户名和密码，或将两者留空以使用现有管理员用户",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符"}},changePassword:{title:"修改密码",currentPassword:"当前密码",currentPasswordPlaceholder:"输入当前密码",newPassword:"新密码",newPasswordPlaceholder:"输入新密码（至少 6 个字符）",confirmPassword:"确认新密码",confirmPasswordPlaceholder:"确认新密码",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符",changing:"修改中...",success:"密码修改成功",failed:"密码修改失败"},plateAlert:{title:"打印已暂停！",message:"在构建板上检测到物体。打印已自动暂停。请清理打印板并继续打印。",understand:"我知道了"},camera:{title:"摄像头视图",invalidPrinterId:"无效的打印机 ID",live:"实时",snapshot:"快照",restartStream:"重启流",refreshSnapshot:"刷新快照",fullscreen:"全屏",exitFullscreen:"退出全屏",connectingToCamera:"连接摄像头中...",capturingSnapshot:"拍摄快照中...",connectionLost:"连接已断开",connectionFailed:"摄像头连接失败",reconnecting:"{{countdown}} 秒后重新连接...（第 {{attempt}}/{{max}} 次尝试）",reconnectNow:"立即重新连接",cameraUnavailable:"摄像头不可用",cameraUnavailableDesc:"请确保打印机已通电并已连接。",noCamera:"无可用摄像头",retry:"重试",cameraStream:"摄像头流",zoomOut:"缩小",zoomIn:"放大",resetZoom:"重置缩放",recording:"录制中",startRecording:"开始录制",stopRecording:"停止录制",chamberLight:"切换腔室灯"},groups:{title:"组管理",subtitle:"管理访问控制的权限组",backToSettings:"返回设置",createGroup:"创建组",noPermission:"您没有访问此页面的权限。",system:"系统",noDescription:"无描述",usersCount:"{{count}} 个用户",permissionsCount:"{{count}} 个权限",edit:"编辑",delete:"删除",toast:{created:"组创建成功",updated:"组更新成功",deleted:"组删除成功",enterGroupName:"请输入组名称"},modal:{editGroup:"编辑组",createGroup:"创建组",cancel:"取消",saving:"保存中...",creating:"创建中...",saveChanges:"保存更改"},form:{groupName:"组名称",groupNamePlaceholder:"输入组名称",systemGroupWarning:"系统组名称不可更改",description:"描述",descriptionPlaceholder:"输入描述（可选）",permissions:"权限（已选 {{count}} 个）"},deleteModal:{title:"删除组",message:"确定要删除此组吗？此组中的用户将失去这些权限。",confirm:"删除组"},editor:{title:"编辑组",createTitle:"创建组",search:"搜索权限...",selectAll:"全选",clearAll:"清除全部",permissionsSelected:"已选 {{count}} 个",noResults:"没有权限匹配您的搜索"}},users:{title:"用户管理",subtitle:"管理用户及其对 Bambuddy 实例的访问",backToSettings:"返回设置",createUser:"创建用户",noPermission:"您没有访问此页面的权限。",admin:"管理员",noGroups:"无组",active:"活跃",inactive:"非活跃",edit:"编辑",delete:"删除",system:"系统",noGroupsAvailable:"无可用组",table:{username:"用户名",groups:"组",status:"状态",actions:"操作"},toast:{created:"用户创建成功",updated:"用户更新成功",deleted:"用户删除成功",fillRequired:"请填写所有必填字段",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符"},modal:{createUser:"创建用户",editUser:"编辑用户",cancel:"取消",creating:"创建中...",saving:"保存中...",saveChanges:"保存更改",advancedAuthSubtitle:"使用高级认证"},form:{username:"用户名",usernamePlaceholder:"输入用户名",email:"邮箱",emailPlaceholder:"user@example.com",password:"密码",passwordPlaceholder:"输入密码",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认密码",newPasswordPlaceholder:"输入新密码",confirmNewPasswordPlaceholder:"确认新密码",leaveBlankToKeep:"留空以保持当前值",groups:"组",optional:"可选",autoGeneratedPassword:"将自动生成安全密码并通过邮件发送给用户。",passwordManagedByAdvancedAuth:'密码由高级认证管理。使用"重置密码"通过邮件向用户发送新密码。',resetPassword:"重置密码",resettingPassword:"重置密码中..."},deleteModal:{title:"删除用户",message:"确定要删除此用户吗？此操作无法撤销。",confirm:"删除用户"}},streamOverlay:{title:"流叠加层",invalidPrinterId:"无效的打印机 ID",cameraStream:"摄像头流",progress:"进度",eta:"预计完成时间",printerIdle:"打印机空闲",printerOffline:"打印机离线",status:{printing:"打印中",paused:"已暂停",finished:"已完成",failed:"失败",idle:"空闲",unknown:"未知"}},profiles:{title:"配置文件",subtitle:"管理您的切片预设和压力推进校准",tabs:{cloud:"云端配置文件",local:"本地配置文件",kprofiles:"K 值配置"},localProfiles:{title:"本地配置文件",subtitle:"从 OrcaSlicer 导入和管理切片预设",import:"导入配置文件",importDesc:"将 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 文件拖放到此处",importing:"导入中...",search:"搜索本地预设...",noPresets:"暂无本地预设",badge:"本地",edit:"编辑",delete:"删除",cancel:"取消",deleteConfirmTitle:"删除预设",deleteConfirm:"确定要删除此预设吗？此操作无法撤销。",source:"来源",inheritsFrom:"继承自",filamentType:"类型",vendor:"厂商",compatiblePrinters:"兼容打印机",nozzleTemp:"喷嘴温度",cost:"成本",density:"密度",pressureAdvance:"压力推进",filament:"耗材",process:"工艺",printer:"打印机",toast:{importSuccess:"已导入 {{count}} 个预设",importSkipped:"跳过 {{count}} 个预设（重复）",importError:"导入时出现 {{count}} 个错误",deleted:"预设已删除",updated:"预设已更新"}},connectedAs:"已连接为",logout:"退出登录",noLogoutPermission:"您没有退出登录的权限",failedToLoad:"加载配置文件失败",retry:"重试",time:{justNow:"刚刚",minsAgo:"{{count}} 分钟前",hoursAgo:"{{count}} 小时前",daysAgo:"{{count}} 天前"},toast:{loggedOut:"已退出登录"},login:{title:"连接到拓竹云",subtitle:"跨设备同步您的切片预设",email:"邮箱",password:"密码",region:"地区",regionGlobal:"全球",regionChina:"中国",verificationCode:"验证码",totpCode:"验证器代码",checkEmail:"检查您的邮箱 ({{email}}) 获取 6 位验证码",enterTotpHint:"输入验证器应用中的 6 位代码",accessToken:"访问令牌",accessTokenHint:"粘贴您的拓竹访问令牌（来自 Bambu Studio）",back:"返回",loginButton:"登录",verifyButton:"验证",setTokenButton:"设置令牌",useToken:"改用访问令牌",useEmail:"改用邮箱登录",toast:{loggedIn:"登录成功",codeSent:"验证码已发送到您的邮箱",enterTotp:"输入验证器应用中的代码",tokenSet:"令牌设置成功"}},presets:{myPreset:"我的预设（可编辑）",duplicate:"复制",editable:"可编辑",failedToLoadDetails:"加载预设详情失败",deleteConfirm:"删除此预设？",deleteWarning:'这将从拓竹云中永久删除"{{name}}"。此操作无法撤销。',noDuplicatePermission:"您没有复制预设的权限",noEditPermission:"您没有编辑预设的权限",noDeletePermission:"您没有删除预设的权限",types:{filament:"耗材预设",printer:"打印机预设",process:"工艺预设"},toast:{deleted:"预设已删除",created:"预设已创建",updated:"预设已更新",duplicated:"预设已复制",fieldAdded:'字段"{{key}}"已添加',exported:"预设已导出"},baseLabel:"基础：{{name}}",currentLabel:"当前：{{name}}",newPreset:"新建预设",editPreset:"编辑预设",duplicatePreset:"复制预设",createNewPreset:"创建新预设",customizeSettings:"自定义新预设的设置",compareWithBase:"与基础预设比较",compare:"比较",basePreset:"基础预设",selectBasePreset:"选择基础预设...",presetName:"预设名称",myCustomPreset:"我的自定义预设",inheritsFrom:"继承自",dropJsonToImport:"拖放 JSON 以导入",tabs:{common:"常用",allFields:"所有字段"},availableFields:"可用字段",searchFieldsPlaceholder:"搜索字段...",noMatchingFields:"没有匹配的字段",allFieldsAdded:"所有字段已添加",addCustomField:"添加自定义字段",yourOverrides:"您的覆盖值",noOverridesYet:"暂无覆盖值",clickFieldsToAdd:"点击左侧的字段进行添加",saveAsTemplate:"保存为模板",jsonTip:"提示：将 .json 文件拖放到此对话框的任意位置以导入设置"},cloudView:{searchPlaceholder:"搜索预设...",templates:"模板",refresh:"刷新",newPreset:"新建预设",clearFilters:"清除筛选",compareMode:"比较模式",selectAnotherPreset:"选择另一个 {{type}} 预设",clickTwoPresets:"点击两个相同类型的预设进行比较",selectFirst:"1. 选择第一个",selectSecond:"2. 选择第二个",compareNow:"立即比较",lastSynced:"上次同步：",showingCount:"显示 {{showing}} / {{total}} 个预设",noPresetsFound:"未找到预设",columns:{filament:"耗材",process:"工艺",printer:"打印机"},noFilamentPresets:"无耗材预设",noProcessPresets:"无工艺预设",noPrinterPresets:"无打印机预设",filters:{type:"类型",owner:"所有者",printer:"打印机",nozzle:"喷嘴",filament:"耗材",layer:"层",all:"全部",myPresets:"我的预设",builtIn:"内置",process:"工艺"},noTemplatesPermission:"您没有管理模板的权限",noRefreshPermission:"您没有刷新配置文件的权限",noCreatePermission:"您没有创建预设的权限"},templates:{title:"快速模板",noTemplates:"暂无模板",createFirst:"从预设编辑器创建模板",typeFilter:"类型：",deleteTitle:"删除模板",deleteWarning:"此操作无法撤销",deleteConfirm:'确定要删除"{{name}}"吗？',namePlaceholder:"模板名称",descriptionPlaceholder:"描述",settingsJson:"设置 (JSON)",fieldsCount:"{{count}} 个字段",shownInModals:"在对话框中显示",hiddenInModals:"在对话框中隐藏",apply:"应用",toast:{deleted:"模板已删除",updated:"模板已更新",created:"模板已创建",applied:"模板已应用"}}},support:{debugLoggingActive:"调试日志记录已激活",manageLogs:"管理",collectItem7:"打印机连接和固件版本",collectItem8:"集成状态（Spoolman、MQTT、HA）",collectItem9:"网络接口（仅子网）",collectItem10:"Python 包版本",collectItem11:"数据库健康检查",collectItem12:"Docker 环境详情"},fileManager:{title:"文件管理器",subtitle:"组织和管理您的打印文件",uploadFiles:"上传文件",newFolder:"新建文件夹",folderName:"文件夹名称",folderNamePlaceholder:"例如：功能零件",renameFile:"重命名文件",renameFolder:"重命名文件夹",moveFiles:"移动 {{count}} 个文件",rootNoFolder:"根目录（无文件夹）",current:"当前",linkFolder:"链接文件夹",linkFolderDescription:'将"{{name}}"链接到项目或归档以便快速访问。',project:"项目",archive:"归档",noProjectsFound:"未找到项目",noArchivesFound:"未找到归档",unlink:"取消链接",link:"链接",dragDropFiles:"将文件拖放到此处",dropFilesHere:"将文件放在此处",orClickToBrowse:"或点击浏览",allFileTypesSupported:"支持所有文件类型。ZIP 文件将被解压。",zipFilesDetected:"检测到 ZIP 文件",zipExtractOptions:"ZIP 文件将被解压。选择如何处理文件夹结构：",preserveZipStructure:"保留 ZIP 中的文件夹结构",createFolderFromZip:"从 ZIP 文件名创建文件夹",stlThumbnailGeneration:"STL 缩略图生成",zipMayContainStl:"ZIP 文件可能包含 STL 文件。可以在解压时生成缩略图。",thumbnailsCanBeGenerated:"可以为 STL 文件生成缩略图。大型模型可能需要更长时间处理。",generateThumbnailsForStl:"为 STL 文件生成缩略图",threemfDetected:"检测到 3MF 文件",threemfExtractionInfo:"将自动从 3MF 文件中提取打印机型号、材料、颜色和打印设置。",willBeExtracted:"将被解压",filesExtracted:"已解压 {{count}} 个文件",uploadComplete:"上传完成：{{succeeded}} 个成功",uploadFailed:"{{count}} 个失败",zipFilesFailed:"{{count}} 个文件失败",uploading:"上传中...",changeLink:"更改链接...",linkTo:"链接到...",linkToProjectOrArchive:"链接到项目或归档",addToQueue:"添加到队列",schedulePrint:"排程",generateThumbnail:"生成缩略图",generateThumbnails:"生成缩略图",generateThumbnailsForMissing:"为缺少缩略图的 STL 文件生成缩略图",gridView:"网格视图",listView:"列表视图",lowDiskSpaceWarning:"磁盘空间不足警告",lowDiskSpaceDetails:"仅剩 {{free}}（总共 {{total}}）。阈值设置为 {{threshold}} GB。",files:"文件",folders:"文件夹",size:"大小",free:"剩余",allFiles:"所有文件",wrap:"换行",enableTextWrapping:"启用文本换行",disableTextWrapping:"禁用文本换行",dragToResizeTooltip:"拖动调整大小，双击重置",searchFiles:"搜索文件...",allTypes:"所有类型",prints:"打印",ascending:"升序",descending:"降序",resultsCount:"{{showing}} / {{total}} 个文件",selectAll:"全选",deselectAll:"取消全选",selected:"已选择 {{count}} 个",adding:"添加中...",loadingFiles:"加载文件中...",folderIsEmpty:"文件夹为空",noFilesYet:"暂无文件",folderEmptyDescription:"上传文件或将文件移入此文件夹以开始使用。",noFilesDescription:"上传文件以开始组织您的打印相关文件。",noMatchingFiles:"没有匹配的文件",noMatchingFilesDescription:"没有文件匹配您当前的搜索或筛选条件。",clearFilters:"清除筛选",printedCount:"已打印 {{count}} 次",uploadedBy:"上传者",deleteFolder:"删除文件夹",deleteFile:"删除文件",deleteFilesCount:"删除 {{count}} 个文件",deleteFolderConfirm:"确定要删除此文件夹吗？其中的所有文件也将被删除。",deleteFileConfirm:"确定要删除此文件吗？",deleteFilesConfirm:"确定要删除 {{count}} 个选中的文件吗？此操作无法撤销。",deleting:"删除中...",noPermissionRenameFolder:"您没有重命名文件夹的权限",noPermissionLinkFolder:"您没有链接文件夹的权限",noPermissionDeleteFolder:"您没有删除文件夹的权限",noPermissionPrint:"您没有打印的权限",noPermissionAddToQueue:"您没有添加到队列的权限",noPermissionDownload:"您没有下载文件的权限",noPermissionRenameFile:"您没有重命名此文件的权限",noPermissionGenerateThumbnail:"您没有生成缩略图的权限",noPermissionDeleteFile:"您没有删除此文件的权限",noPermissionCreateFolder:"您没有创建文件夹的权限",noPermissionUpload:"您没有上传文件的权限",noPermissionMoveFiles:"您没有移动文件的权限",noPermissionDeleteFiles:"您没有删除文件的权限",linkExternal:"链接外部",linkExternalFolder:"链接外部文件夹",linkExternalFolderDescription:"将主机目录（NAS、USB、网络共享）挂载到文件管理器中。文件不会被复制——直接从原始路径访问。",externalFolderNamePlaceholder:"例如：NAS打印文件",externalPath:"主机路径",externalPathHelp:"Docker主机上目录的绝对路径。必须以绑定挂载方式挂载到容器中。",readOnly:"只读",readOnlyHelp:"防止上传和删除",showHiddenFiles:"显示隐藏文件（点文件）",externalFolder:"外部文件夹",scanFolder:"扫描",toast:{folderCreated:"文件夹已创建",folderDeleted:"文件夹已删除",fileDeleted:"文件已删除",filesDeleted:"已删除 {{count}} 个文件",filesMoved:"文件已移动",folderLinked:"文件夹已链接",folderUnlinked:"文件夹已取消链接",externalFolderLinked:"外部文件夹已链接并扫描",folderScanned:"扫描完成：添加 {{added}} 个，移除 {{removed}} 个",addedToQueue:"已将 {{count}} 个文件添加到队列",addedToQueuePartial:"已添加 {{added}} 个文件，{{failed}} 个失败",failedToAddToQueue:"添加文件失败：{{error}}",fileRenamed:"文件已重命名",folderRenamed:"文件夹已重命名",thumbnailsGenerated:"已生成 {{count}} 个缩略图",thumbnailsGeneratedPartial:"已生成 {{succeeded}} 个缩略图，{{failed}} 个失败",noStlMissingThumbnails:"没有缺少缩略图的 STL 文件",failedToGenerateThumbnails:"生成缩略图失败：{{error}}",thumbnailGenerated:"缩略图已生成",failedToGenerateThumbnail:"生成缩略图失败：{{error}}"}},projects:{title:"项目",subtitle:"组织和跟踪您的 3D 打印项目",newProject:"新建项目",editProject:"编辑项目",deleteProject:"删除项目",projectName:"项目名称",description:"描述",noProjects:"暂无项目",noProjectsFiltered:"没有{{status}}项目",noProjectsFilteredHelp:"您没有任何{{status}}项目。当项目状态更改时，它们将出现在这里。",createFirst:"创建您的第一个项目以开始组织相关打印、跟踪进度和管理构建。",createFirstButton:"创建您的第一个项目",create:"创建",files:"文件",prints:"打印",plates:"板",parts:"零件",lastModified:"最后修改",deleteConfirm:"确定要删除此项目吗？归档和队列项目将被取消链接但不会被删除。",addFiles:"添加文件",removeFile:"移除文件",viewDetails:"查看详情",namePlaceholder:"例如：Voron 2.4 构建",descriptionPlaceholder:"可选描述...",color:"颜色",targetPlates:"目标板数",targetPlatesPlaceholder:"例如：25",targetPlatesHelp:"打印任务数量",targetParts:"目标零件数",targetPartsPlaceholder:"例如：150",targetPartsHelp:"所需零件总数",tagsLabel:"标签（逗号分隔）",tagsPlaceholder:"例如：voron、功能件、礼物",dueDate:"截止日期",priority:"优先级",priorityLow:"低",priorityNormal:"普通",priorityHigh:"高",priorityUrgent:"紧急",statusActive:"进行中",statusCompleted:"已完成",statusArchived:"已归档",done:"完成",completed:"已完成",failed:"失败",inQueue:"队列中",noPrintsYet:"暂无打印",printJobs:"打印任务（板）",partsPrinted:"已打印零件",failedParts:"失败零件",import:"导入",export:"导出",importProject:"导入项目",exportAll:"导出所有项目",loading:"加载项目中...",noEditPermission:"您没有编辑项目的权限",noDeletePermission:"您没有删除项目的权限",noCreatePermission:"您没有创建项目的权限",noImportPermission:"您没有导入项目的权限",noExportPermission:"您没有导出项目的权限",toast:{created:"项目已创建",updated:"项目已更新",deleted:"项目已删除",imported:"项目已导入",multipleImported:"已导入 {{count}} 个项目",importFailed:"导入失败",exported:"项目已导出（仅元数据）"}},projectDetail:{notFound:"未找到项目",backToProjects:"返回项目",export:"导出",exportProject:"导出项目",noExportPermission:"您没有导出项目的权限",noEditPermission:"您没有编辑项目的权限",partOf:"属于：",priorityLabel:"优先级：",noPrints:"此项目暂无打印",status:{active:"进行中",completed:"已完成",archived:"已归档"},priority:{low:"低",normal:"普通",high:"高",urgent:"紧急"},dueDate:{overdue:"已逾期",today:"今天到期",daysLeft:"还有 {{count}} 天"},progress:{platesProgress:"板进度",partsProgress:"零件进度",printJobs:"打印任务",parts:"零件",percentComplete:"{{percent}}% 完成",remaining:"剩余 {{count}} 个"},stats:{printJobs:"打印任务",total:"总计",failed:"{{count}} 个失败",partsPrinted:"已打印 {{count}} 个零件",printTime:"打印时间",filamentUsed:"耗材用量"},cost:{title:"成本追踪",filamentCost:"耗材成本",energy:"能源",totalCost:"总成本",total:"总计",includesBom:"含物料清单",budget:"预算",remaining:"剩余"},subProjects:{title:"子项目 ({{count}})"},notes:{title:"备注",noEditPermission:"您没有编辑备注的权限",placeholder:"添加关于此项目的备注...",empty:"暂无备注。点击编辑添加备注。"},files:{title:"文件",linkFolders:"从文件管理器链接文件夹",forQuickAccess:"到此项目以便快速访问。",fileCount:"{{count}} 个文件",empty:"未链接文件夹。前往文件管理器将文件夹链接到此项目。",noFiles:"此文件夹中没有文件。",print:"立即打印",addToQueue:"加入队列"},bom:{title:"材料清单",acquired:"已获取 {{completed}}/{{total}}",showAll:"显示全部",hideDone:"隐藏已完成",addPart:"添加零件",noAddPermission:"您没有添加零件的权限",partNamePlaceholder:"零件名称（例如：M3x8 螺丝）",partName:"零件名称",qty:"数量",price:"价格 ({{currency}})",sourcingUrlPlaceholder:"采购链接（可选）",remarksPlaceholder:"备注（可选）",deletePart:"删除零件",deleteConfirm:'确定要删除"{{name}}"吗？',noUpdatePermission:"您没有更新零件的权限",noEditPermission:"您没有编辑零件的权限",noDeletePermission:"您没有删除零件的权限",totalCost:"总成本：",empty:"材料清单中没有零件。添加硬件、电子元件或其他组件以跟踪需要采购的物品。"},timeline:{title:"活动时间线",empty:"暂无活动。"},template:{saveAsTemplate:"保存为模板",noCreatePermission:"您没有创建模板的权限"},queue:{title:"队列",viewAll:"查看全部",printing:"{{count}} 个打印中",queued:"{{count}} 个排队中"},prints:{title:"打印 ({{count}})"},toast:{projectUpdated:"项目已更新",partAdded:"零件已添加",partRemoved:"零件已移除",exportFailed:"导出失败",projectExported:"项目已导出",templateCreated:"模板已创建"}},system:{title:"系统信息",version:"版本",uptime:"运行时间",cpuUsage:"CPU 使用率",memoryUsage:"内存使用率",diskUsage:"磁盘使用率",networkInfo:"网络信息",logs:"日志",debugMode:"调试模式",enableDebug:"启用调试日志",disableDebug:"禁用调试日志",downloadLogs:"下载日志",clearLogs:"清除日志",dockerInfo:"Docker 信息",containerName:"容器名称",imageName:"镜像名称",platform:"平台",architecture:"架构"},library:{title:"耗材库",addFilament:"添加耗材",editFilament:"编辑耗材",deleteFilament:"删除耗材",vendor:"厂商",material:"材料",color:"颜色",kFactor:"K 值",temperature:"温度",noFilaments:"耗材库中没有耗材",deleteConfirm:"确定要删除此耗材吗？",importFromPrinter:"从打印机导入",exportToFile:"导出到文件"},spoolman:{title:"Spoolman 集成",enabled:"Spoolman 已启用",url:"Spoolman URL",connected:"已连接",disconnected:"未连接",testConnection:"测试连接",sync:"同步",syncing:"同步中...",lastSync:"上次同步",linkToSpoolman:"链接到 Spoolman",openInSpoolman:"在 Spoolman 中打开",unlinkSpool:"取消链接耗材",unlinkConfirmTitle:"解开线轴？",unlinkConfirmMessage:"这将断开卷轴与 Spoolman 的连接。Spoolman 中的卷轴数据将保持不变。",selectSpool:"选择耗材",noUnlinkedSpools:"无未链接的耗材",linkSuccess:"耗材已成功链接到 Spoolman",linkFailed:"链接耗材失败",unlinkSuccess:"已成功从 Spoolman 取消链接耗材",unlinkFailed:"取消链接耗材失败",spoolId:"耗材 ID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"剩余",disableWeightSync:"禁用 AMS 估计重量同步",disableWeightSyncDesc:"不从 AMS 估计值更新剩余容量。如果您更喜欢 Spoolman 的用量追踪而非 AMS 百分比估计，请使用此选项。新耗材仍将使用 AMS 估计值作为初始重量。",reportPartialUsage:"报告失败打印的部分用量",reportPartialUsageDesc:"当打印失败或被取消时，根据层进度报告估计的耗材使用量。"},inventory:{title:"耗材库存",addSpool:"添加耗材",editSpool:"编辑耗材",material:"材料",selectMaterial:"选择材料...",subtype:"子类型",brand:"品牌",searchBrand:"搜索品牌...",useCustomBrand:'使用"{{brand}}"',useCustomMaterial:"使用自定义材料：{{material}}",colorName:"颜色名称",colorNamePlaceholder:"翡翠白、烈焰红...",color:"颜色",hexColor:"十六进制颜色",pickColor:"选择自定义颜色",labelWeight:"标签重量",coreWeight:"空盘重量",searchSpoolWeight:"搜索耗材重量...",weightUsed:"已使用",currentWeight:"剩余重量",measuredWeight:"称量重量",spoolName:"线轴",costPerKg:"每公斤成本",measuredWeightError:"称量重量必须在 {{min}}g 到 {{max}}g 之间。",slicerFilament:"切片耗材",slicerFilamentName:"切片预设名称",slicerPreset:"切片预设",searchPresets:"搜索耗材预设...",selectedPreset:"已选择",noPresetsFound:"未找到预设",tempOverrides:"温度覆盖",note:"备注",notePlaceholder:"关于此耗材的任何备注...",archive:"归档",restore:"恢复",noSpools:"暂无耗材。添加您的第一个耗材开始使用。",noManualSpools:"没有手动添加的耗材。请先向库存中添加耗材。",kProfiles:"K 值配置",addKProfile:"添加 K 值配置",assignSpool:"分配耗材",unassignSpool:"取消分配",assignSuccess:"耗材已分配，AMS 槽位已配置",assignFailed:"分配耗材失败",assignMismatchTitle:"材料不匹配",assignMismatchMessage:'所选线轴材料 "{{spoolMaterial}}" 与 {{location}} 的料槽材料 "{{trayMaterial}}" 不匹配。仍要分配吗？',assignMismatchConfirm:"仍然分配",assignPartialMismatchMessage:'线轴材料 "{{spoolMaterial}}" 与 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否继续？',assignProfileMismatchMessage:'线轴配置 "{{spoolProfile}}" 与 {{location}} 的料槽配置 "{{trayProfile}}" 不一致。是否继续？',selectSpool:"选择要分配到此槽位的耗材",assigned:"已分配",assigning:"分配中...",searchSpools:"搜索耗材...",showAllSpools:"显示所有耗材",allMaterials:"所有材料",filterByBrand:"按品牌筛选...",showArchived:"显示已归档",quickAdd:"快速添加（库存）",quantity:"数量",stock:"库存",configured:"已配置",spoolsCreated:"已创建 {{count}} 个耗材",spoolCreated:"耗材已创建",spoolUpdated:"耗材已更新",spoolDeleted:"耗材已删除",spoolArchived:"耗材已归档",spoolRestored:"耗材已恢复",deleteConfirm:"确定要删除此耗材吗？此操作无法撤销。",archiveConfirm:"确定要归档此耗材吗？",advancedSettings:"高级设置",filamentInfoTab:"耗材信息",paProfileTab:"PA 配置",filamentInfo:"耗材",additional:"附加",loadingPresets:"加载云端预设中...",cloudConnected:"云端已连接",cloudNotConnected:"云端未连接（使用默认值）",recentColors:"最近",searchColors:"搜索颜色...",searchResults:"搜索结果",allColors:"所有颜色",commonColors:"常用颜色",showLess:"显示更少",showAll:"显示全部",noColorsFound:"没有颜色匹配您的搜索",noResults:"未找到匹配项",selectMaterialFirst:"请先在耗材信息选项卡中选择材料。",noPrintersConfigured:"未配置打印机。添加打印机以使用 PA 配置。",matchingFilter:"匹配",anyBrand:"任何品牌",anyVariant:"任何变体",autoSelect:"自动选择",matches:"匹配",match:"匹配",noMatches:"无匹配",connected:"已连接",offline:"离线",printerOffline:"打印机离线。连接后查看校准配置。",noKProfilesMatch:"没有 K 值配置匹配所选耗材。",leftNozzle:"左喷嘴",rightNozzle:"右喷嘴",profilesSelected:"个校准配置已选择",totalInventory:"总库存",totalConsumed:"总消耗",byMaterial:"按材料",inPrinter:"在打印机中",lowStock:"库存不足",sinceTracking:"自开始追踪",loadedInAms:"已装载到 AMS/外置",remaining:"剩余",weightCheck:"重量检查",lastWeighed:"上次称量",neverWeighed:"从未称量",search:"搜索耗材...",showing:"显示",to:"到",of:"共",show:"显示",spools:"个耗材",spool:"个耗材",page:"页",noSpoolsMatch:"未找到结果",noSpoolsMatchDesc:"尝试调整您的搜索或筛选条件。",active:"活跃",archived:"已归档",all:"全部",used:"已使用",new:"新的",clearFilters:"清除筛选",table:"表格",cards:"卡片",net:"净重",groupSimilar:"分组",groupedSpools:"{{count}} 个相同耗材",groupedRows:"行",columns:"列",configureColumns:"配置列",configureColumnsDesc:"拖动以重新排序列或使用箭头。使用眼睛图标切换可见性。",visible:"可见",reset:"重置",cancel:"取消",applyChanges:"应用更改",moveUp:"上移",moveDown:"下移",hideColumn:"隐藏列",showColumn:"显示列",linkToSpool:"链接到耗材",tagLinked:"标签已链接到耗材",tagLinkFailed:"链接标签失败",tagAlreadyLinked:"标签已链接到其他耗材",unknownTag:"检测到未知 RFID 标签",usageHistory:"使用历史",noUsageHistory:"暂无使用记录",printName:"打印名称",weightConsumed:"消耗重量",clearHistory:"清除",historyCleared:"使用历史已清除",fillSourceLabel:"(库存)",lowStockThresholdError:"阈值必须在 0.1 到 99.9 之间"},timelapse:{title:"延时摄影",create:"创建延时摄影",download:"下载",delete:"删除",preview:"预览",frameRate:"帧率",quality:"质量",processing:"处理中...",noTimelapses:"无可用延时摄影"},ams:{title:"AMS",slot:"槽位",empty:"空",emptySlot:"空槽位",unknown:"未知",humidity:"湿度",temperature:"温度",filamentType:"耗材类型",filamentColor:"颜色",remaining:"剩余",history:"AMS 历史",noHistory:"无可用历史",configureSlot:"配置槽位",externalSpool:"外置耗材",profile:"配置",kFactor:"K 值",fill:"填充",configure:"配置",used:"已使用",remainingUnit:"剩余"},printModal:{title:"开始打印",selectPrinter:"选择打印机",selectPlate:"选择板",filamentMapping:"耗材映射",totalCost:"总成本：",slotRemainingShort:" - 剩余 {{grams}}g",printSettings:"打印设置",bedLeveling:"热床调平",flowCalibration:"流量校准",vibrationCalibration:"振动校准",layerInspection:"首层检查",timelapse:"延时摄影",startPrint:"开始打印",addToQueue:"添加到队列",cancel:"取消",noPrintersAvailable:"无可用打印机",printerBusy:"打印机忙碌",printerOffline:"打印机离线",sameTypeDifferentColor:"相同类型，不同颜色",filamentTypeNotLoaded:"耗材类型未装载",openCalendar:"打开日历",leftNozzle:"左",rightNozzle:"右",leftNozzleTooltip:"左喷嘴",rightNozzleTooltip:"右喷嘴",filamentOverride:"耗材覆盖",filamentOverrideHint:"可选覆盖用于基于模型的耗材分配。调度器将使用您选择的耗材而不是原始 3MF 值进行匹配。",originalFilament:"原始",overrideWith:"覆盖为",resetToOriginal:"恢复为原始",insufficientFilamentTitle:"耗材不足",insufficientFilamentMessage:"部分已分配线轴的剩余耗材少于本次打印所需：",insufficientFilamentLine:"{{printer}} - {{slot}}：需要 {{required}}g，剩余 {{remaining}}g",printAnyway:"仍然打印",forceColorMatch:"强制颜色匹配",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"分批发送到 {{count}} 台打印机",gcodeInjection:"注入自动打印G-code"},backup:{title:"备份与恢复",createBackup:"创建备份",restoreBackup:"恢复备份",restoreDescription:"从备份文件替换所有数据",downloadBackup:"下载备份",uploadBackup:"上传备份",lastBackup:"上次备份",autoBackup:"自动备份",backupNow:"立即备份",restoreWarning:"警告：恢复备份将覆盖所有当前数据。",includeArchives:"包含归档",includeSettings:"包含设置",includeProfiles:"包含配置文件",backupSuccess:"备份创建成功",restoreSuccess:"备份恢复成功",backupFailed:"备份失败",restoreFailed:"恢复失败",restoreNote:"恢复期间虚拟打印机将停止",githubBackup:"GitHub 备份",enabled:"已启用",cloudLoginRequired:"需要登录 Bambu Cloud。请在 配置文件 → 云配置文件 中登录以启用 GitHub 备份。",cloudLoginRequiredShort:"需要Cloud登录",githubDescription:"自动将您的配置文件同步到私有 GitHub 仓库以进行备份和版本历史记录。",repositoryUrl:"仓库 URL",personalAccessToken:"个人访问令牌",tokenSaved:"（已保存）",enterNewToken:"输入新令牌以更新",tokenHint:"具有内容读写权限的细粒度令牌",branch:"分支",manualOnly:"仅手动",hourly:"每小时",daily:"每天",weekly:"每周",includeInBackup:"包含在备份中",kProfiles:"K 配置文件",kProfilesDescription:"来自已连接打印机的压力推进校准",noPrintersConnected:"没有打印机连接",printersConnected:"{{connected}}/{{total}} 已连接",cloudProfiles:"云配置文件",cloudProfilesDescription:"来自 Bambu Cloud 的耗材、打印机和工艺预设",appSettings:"应用设置",appSettingsDescription:"Bambuddy 配置（完整数据库）",spoolInventory:"耗材库存",spoolInventoryDescription:"耗材卷轴、使用记录和成本追踪",printArchives:"打印档案",printArchivesDescription:"打印历史元数据（不含 gcode/3MF 文件）",lastBackupAt:"上次备份：",noBackupsYet:"尚无备份",next:"下次：",startingBackup:"正在启动备份...",test:"测试",enableBackup:"启用备份",testConnection:"测试连接",enterRepoUrl:"请输入仓库 URL",enterRepoAndToken:"请输入仓库 URL 和访问令牌",repoRequired:"仓库 URL 为必填项",tokenRequired:"访问令牌为必填项",githubBackupEnabled:"GitHub 备份已启用",tokenUpdated:"令牌已更新",settingsSaved:"设置已保存",failedToSave:"保存失败：{{message}}",backupCompleteFiles:"备份完成 - {{count}} 个文件已更新",backupSkippedNoChanges:"备份已跳过 - 无更改",backupFailed2:"备份失败：{{message}}",clearedLogs:"已清除 {{count}} 条日志",failedToClearLogs:"清除日志失败：{{message}}",history:"历史记录",clear:"清除",date:"日期",status:"状态",commit:"提交",localBackup:"本地备份",localBackupDescription:"创建 Bambuddy 数据的完整备份，包括数据库、档案、上传和所有文件。",downloadBackupLabel:"下载备份",completeBackupZip:"完整备份：数据库 + 所有文件（ZIP）",download:"下载",preparingBackup:"正在准备备份...",creatingArchive:"正在创建备份归档...对于大型归档可能需要一些时间。",downloadingFile:"正在下载备份文件...",backupDownloaded:"备份下载成功",failedToCreateBackup:"创建备份失败：{{message}}",restore:"恢复",restoreReplacesAll:"恢复将替换所有数据。",restoreReplacesAllDetail:"您当前的数据库和文件将被完全替换。恢复后需要重启。",restoreConfirmTitle:"恢复备份",restoreConfirmMessage:'您确定要从"{{filename}}"恢复吗？这将完全替换您当前的数据库和所有文件。恢复后需要重启应用程序。',restoreConfirmButton:"恢复备份",uploadingFile:"正在上传备份文件...",backupRestoredRestart:"备份已恢复。请重启 Bambuddy。",failedToRestore:"恢复备份失败。请检查文件格式。",reloadNow:"立即重新加载",creatingBackup:"正在创建备份",restoringBackup:"正在恢复备份",preparing:"准备中...",processing:"处理中...",doNotClosePage:"请不要关闭此页面或导航离开。对于大型备份，此操作可能需要几分钟。",restoring:"恢复中...",restoreComplete:"恢复完成",restoreFailed2:"恢复失败",importSettings:"从备份文件导入设置",pleaseWaitRestoring:"请等待数据恢复中",selectBackupFile:"点击选择备份文件（.json 或 .zip）",duplicateHandling:"重复项处理方式：",matchPrinters:"打印机",matchPrintersBy:"按序列号匹配",matchSmartPlugs:"智能插座",matchSmartPlugsBy:"按 IP 地址匹配",matchNotificationProviders:"通知提供者",matchNotificationProvidersBy:"按名称匹配",matchFilaments:"耗材",matchFilamentsBy:"按名称 + 类型 + 品牌匹配",matchArchives:"档案",matchArchivesBy:"按内容哈希匹配（始终跳过）",matchPendingUploads:"待上传",matchPendingUploadsBy:"按文件名匹配",matchSettingsTemplates:"设置和模板",matchSettingsTemplatesBy:"始终覆盖",replaceExisting:"替换现有数据",keepExisting:"保留现有数据",overwriteDescription:"用备份数据覆盖已存在的项目",keepDescription:"仅恢复尚不存在的项目",overwriteCaution:"注意：",overwriteWarning:"覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问代码永远不会被覆盖。",cancel:"取消",processingBackup:"正在处理备份文件...",itemsRestored:"已恢复项目",itemsSkipped:"已跳过项目",restored:"已恢复",skippedAlreadyExist:"已跳过（已存在）",filesCategory:"文件（3MF、缩略图等）",andMore:"...还有 {{count}} 项",newApiKeysGenerated:"已生成新的 API 密钥",keysShownOnce:"这些密钥仅显示一次。请立即复制！",copy:"复制",noDataFound:"在备份文件中未找到可恢复的数据。",close:"关闭",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"设置",notification_providers:"通知提供者",notification_templates:"通知模板",smart_plugs:"智能插座",printers:"打印机",filaments:"耗材",maintenance_types:"维护类型",archives:"档案",projects:"项目",pending_uploads:"待上传",external_links:"外部链接",api_keys:"API 密钥"}},tags:{title:"标签",addTag:"添加标签",editTag:"编辑标签",deleteTag:"删除标签",tagName:"标签名称",tagColor:"标签颜色",noTags:"无标签",deleteConfirm:"确定要删除此标签吗？",manageTags:"管理标签"},uploadModal:{title:"上传 3MF 文件",dragDrop:"将 .3mf 文件拖放到此处",or:"或",browseFiles:"浏览文件",extractionInfo:"将从 3MF 文件元数据中自动提取打印机型号。",uploaded:"已上传",failed:"失败",uploading:"上传中...",upload:"上传",uploadFailed:"上传失败"},editArchive:{title:"编辑归档",name:"名称",namePlaceholder:"打印名称",printer:"打印机",noPrinter:"无打印机",project:"项目",noProject:"无项目",itemsPrinted:"打印数量",itemsPrintedHelp:"此打印任务中生产的物品数量",notes:"备注",notesPlaceholder:"添加关于此打印的备注...",externalLink:"外部链接",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"链接到 Printables、Thingiverse 或其他来源",tags:"标签",tagsPlaceholder:"添加标签...",addMoreTags:"添加更多标签...",matchingTags:'匹配"{{query}}"',existingTags:"现有标签",clickToAdd:"（点击添加）",status:"状态",failureReason:"失败原因",selectReason:"选择原因...",photos:"打印成品照片",photosHelp:"点击 + 添加打印成品照片",printResult:"打印成品",saving:"保存中...",failureReasons:{adhesionFailure:"附着力失败",spaghettiDetached:"拉丝 / 脱落",layerShift:"层偏移",cloggedNozzle:"喷嘴堵塞",filamentRunout:"耗材用完",warping:"翘曲",stringing:"拉丝",underExtrusion:"挤出不足",powerFailure:"断电",userCancelled:"用户取消",other:"其他"},statuses:{completed:"已完成",failed:"失败",aborted:"已取消",printing:"打印中"}},kProfiles:{title:"K 值配置",noPrintersConfigured:"未配置打印机",addPrinterInSettings:"在设置中添加打印机以管理 K 值配置",noActivePrinters:"无活跃打印机",enablePrinterConnection:"启用打印机连接以查看其 K 值配置",loadingProfiles:"加载 K 值配置中...",printerOffline:"打印机离线",printerOfflineDesc:"所选打印机未连接。开启电源以查看 K 值配置。",noMatchingProfiles:"无匹配的配置",noMatchingProfilesDesc:"没有配置匹配您的搜索条件",noKProfiles:"无 K 值配置",noKProfilesDesc:"未找到 {{diameter}}mm 喷嘴的压力推进配置",createFirstProfile:"创建第一个配置",printer:"打印机",nozzle:"喷嘴",refresh:"刷新",addProfile:"添加配置",export:"导出",import:"导入",select:"选择",selectAll:"全选",delete:"删除",searchPlaceholder:"按名称或耗材搜索...",allExtruders:"所有挤出机",leftOnly:"仅左侧",rightOnly:"仅右侧",allFlow:"所有流量",hfOnly:"仅高流量",sOnly:"仅标准",sortName:"排序：名称",sortKValue:"排序：K 值",sortFilament:"排序：耗材",leftExtruder:"左挤出机",rightExtruder:"右挤出机",modal:{addTitle:"添加 K 值配置",editTitle:"编辑 K 值配置",profileName:"配置名称",profileNamePlaceholder:"我的 PLA 配置",kValue:"K 值",kValuePlaceholder:"0.020",kValueHelp:"典型范围：PLA 0.01 - 0.06，PETG 0.02 - 0.10",filament:"耗材",selectFilament:"选择耗材...",noFilamentsHelp:"未找到耗材。请先在 Bambu Studio 中创建 K 值配置。",flowType:"流量类型",highFlow:"高流量",standard:"标准",nozzleSize:"喷嘴尺寸",extruder:"挤出机",extruders:"挤出机",left:"左",right:"右",notes:"备注（本地存储）",notesPlaceholder:"添加关于此配置的备注...",notesHelp:"备注保存在 Bambuddy 中，不在打印机上",syncing:"与打印机同步中...",savingExtruder:"保存到挤出机 {{current}}/{{total}}...",pleaseWait:"请稍候"},deleteConfirm:{title:"删除配置",cannotUndo:"此操作无法撤销",message:'确定要从打印机删除"{{name}}"吗？'},bulkDelete:{title:"删除配置",cannotUndo:"此操作无法撤销",message:"确定要从打印机删除 {{count}} 个选中的配置吗？"},toast:{profileSaved:"K 值配置已保存",profilesSaved:"K 值配置已保存到 {{count}} 个挤出机",selectAtLeastOneExtruder:"请至少选择一个挤出机",profileDeleted:"K 值配置已删除",profilesDeleted:"已删除 {{count}} 个配置",exportedProfiles:"已导出 {{count}} 个配置",importedProfiles:"已导入 {{count}} / {{total}} 个配置",noProfilesToExport:"无可导出的配置",invalidFileFormat:"无效的文件格式",failedToParseImport:"解析导入文件失败",failedToSaveBatch:"批量保存 K 值配置失败",noteSaved:"备注已保存",failedToSaveNote:"保存备注失败"},permission:{noRead:"您没有刷新配置的权限",noCreate:"您没有添加配置的权限",noUpdate:"您没有更新 K 值配置的权限",noDelete:"您没有删除 K 值配置的权限",noExport:"您没有导出配置的权限",noImport:"您没有导入配置的权限"}},virtualPrinter:{title:"虚拟打印机",running:"运行中",stopped:"已停止",description:{default:"启用虚拟打印机，使其在 Bambu Studio 和 OrcaSlicer 中可见。发送到此打印机的文件将直接归档而不打印。",proxy:"启用代理，将切片软件流量中继到真实打印机，允许在任何网络上远程打印。"},enable:{title:"启用虚拟打印机",visibleInSlicer:'在切片软件发现中显示为"Bambuddy"',proxyingTo:"代理到 {{name}}",notActive:"未激活"},model:{title:"打印机型号",description:"选择要模拟的打印机型号。",restartWarning:"更改型号将重启虚拟打印机"},accessCode:{title:"访问码",isSet:"访问码已设置",notSet:"未设置访问码 - 需要设置才能启用",placeholder:"输入 8 位字符代码",placeholderChange:"输入新代码以更改",hint:"必须恰好 8 个字符。切片软件使用此代码进行认证。",charCount:"({{count}}/8)"},targetPrinter:{title:"目标打印机",configured:"代理目标已配置",notConfigured:"未选择目标打印机 - 代理模式需要设置",placeholder:"选择打印机...",hint:"选择要将切片软件流量代理到的打印机。打印机必须处于局域网模式。",noPrinters:"未配置打印机。请先添加打印机以使用代理模式。"},remoteInterface:{title:"网络接口覆盖",configured:"接口覆盖已激活",optional:"可选 - 当自动检测的 IP 不正确时使用（例如多网卡、Docker、VPN）",placeholder:"自动检测（默认）...",hint:"覆盖通过 SSDP 广播并在 TLS 证书中使用的 IP 地址。在 Bambuddy 有多个网络接口时很有用。"},mode:{title:"模式",archive:"归档",archiveDesc:"立即归档文件",review:"审核",reviewDesc:"归档前审核",queue:"队列",queueDesc:"归档并添加到队列",proxy:"代理",proxyDesc:"中继到真实打印机"},autoDispatch:{title:"自动派发",description:"添加到队列时自动开始打印。关闭后，打印任务等待手动派发。"},setupRequired:{title:"需要设置",description:"虚拟打印机功能需要额外的系统配置才能工作。包括端口转发、防火墙规则和平台特定设置。",readGuide:"启用前请阅读设置指南"},howItWorks:{title:"工作原理",step1:"在同一局域网中，虚拟打印机会通过发现机制自动出现在您的切片软件（Bambu Studio / OrcaSlicer）中。从其他网络，通过 IP 地址和访问码手动添加。",step2:'在归档、审核和队列模式下，使用切片软件中的"发送"按钮将 3MF 文件上传到 Bambuddy。切片软件会显示"打印成功"— 文件已存储，未打印。',step3:"在代理模式下，虚拟打印机将所有流量中继到真实打印机 — 打印会立即开始，就像直接连接一样。"},status:{title:"状态详情",printerName:"打印机名称",model:"型号",serialNumber:"序列号",mode:"模式",pendingFiles:"待处理文件",targetPrinter:"目标打印机",ftpPort:"FTP 端口",mqttPort:"MQTT 端口",ftpConnections:"FTP 连接",mqttConnections:"MQTT 连接"},toast:{updated:"虚拟打印机设置已更新",failedToUpdate:"更新设置失败",accessCodeRequired:"请先设置访问码",targetPrinterRequired:"请先选择目标打印机",bindIpRequired:"请先设置绑定 IP",accessCodeEmpty:"访问码不能为空",accessCodeLength:"访问码必须恰好 8 个字符",created:"虚拟打印机已创建",failedToCreate:"创建虚拟打印机失败",deleted:"虚拟打印机已删除",failedToDelete:"删除虚拟打印机失败"},list:{title:"虚拟打印机",add:"添加",addFirst:"添加虚拟打印机",empty:"未配置虚拟打印机。添加一个以开始使用。"},bindIp:{title:"绑定接口",placeholder:"选择接口...",hint:"此虚拟打印机绑定的网络接口。每台打印机必须唯一。"},proxy:{accessCodeHint:"在代理模式下，在切片软件中使用目标打印机的访问码。连接会透明转发到真实打印机。"},addDialog:{title:"添加虚拟打印机",name:"名称",hint:"创建后可以配置访问码、目标打印机和其他设置。",create:"创建"},deleteConfirm:{title:"删除虚拟打印机",message:'确定要删除"{{name}}"吗？这将停止此打印机的所有服务。'}},modelViewer:{openInSlicer:"在切片软件中打开",tabs:{model:"3D 模型",gcode:"G-code 预览"},notAvailable:"不可用",notSliced:"未切片",plates:"板",allPlates:"所有板",plateNumber:"板 {{number}}",plateCount:"{{count}} 个板",plateCount_other:"{{count}} 个板",objectCount:"{{count}} 个对象",objectCount_other:"{{count}} 个对象",filamentCount:"{{count}} 种耗材",filamentCount_other:"{{count}} 种耗材",eta:"预计 {{minutes}} 分钟",noPreview:"此文件无可用预览",pagination:{pageOf:"第 {{current}} / {{total}} 页",prev:"上一页",next:"下一页"},errors:{failedToLoad:"加载文件失败",noMeshes:"3MF 文件中未找到网格",unsupportedFormat:"不支持的文件格式"}},maintenanceDescriptions:{lubricateCarbonRods:"在碳纤维杆上涂抹润滑剂以确保顺畅运动",lubricateRails:"在线性导轨上涂抹润滑剂以确保顺畅运动",cleanNozzle:"清洁热端和喷嘴以防止堵塞",checkBelts:"检查皮带张力以确保打印精度",cleanBuildPlate:"清洁构建板以获得更好的附着力",checkExtruder:"检查挤出机齿轮磨损情况",checkCooling:"确保冷却风扇正常工作",generalInspection:"打印机综合检查",cleanCarbonRods:"清洁碳纤维杆以减少摩擦",lubricateSteelRods:"在钢杆上涂抹润滑剂以确保顺畅运动",cleanSteelRods:"清洁钢杆以减少摩擦",cleanLinearRails:"擦拭线性导轨以清除灰尘和碎屑",checkPtfeTube:"检查 PTFE 管的磨损或损坏",replaceHepaFilter:"更换 HEPA 过滤器以保证空气质量",replaceCarbonFilter:"更换活性炭过滤器",lubricateLeftNozzleRail:"润滑左喷嘴导轨（H2 系列）"},smartPlugs:{offline:"离线",admin:"管理",openPlugAdminPage:"打开插座管理页面",deleteSmartPlug:"删除智能插座",turnOnSmartPlug:"开启智能插座",turnOffSmartPlug:"关闭智能插座",turnOn:"开启",turnOff:"关闭",addSmartPlug:{scanningNetwork:"扫描网络中...",chooseEntity:"选择实体...",connectionFailed:"连接失败",searchEntities:"搜索实体...",searchPowerSensors:"搜索功率传感器...",searchEnergySensors:"搜索能量传感器...",placeholders:{plugName:"客厅插座",mqttStateOnValue:"ON、true、1",mqttSameAsPower:"与功率主题相同，或不同"}},linkedTo:"关联到：",monitorOnly:"仅监控",alerts:"警报",scheduleOn:"开启 {{time}}",scheduleOff:"关闭 {{time}}",on:"开启",off:"关闭",power:"功率",kwhToday:"今日kWh",settings:"设置",automationSettings:"自动化设置",showInSwitchbar:"在开关栏显示",quickAccessSidebar:"从侧边栏快速访问",enabled:"已启用",enableAutomation:"为此插座启用自动化",autoOn:"自动开启",autoOnDescription:"打印开始时开启",autoOff:"自动关闭",autoOffDescription:"打印完成时关闭（一次性）",autoOffPersistent:"保持启用",autoOffPersistentDescription:"在打印之间保持启用而非一次性",turnOffDelayMode:"关闭延迟模式",time:"时间",temp:"温度",delayMinutes:"延迟（分钟）",tempThreshold:"温度阈值（°C）",tempThresholdDescription:"当喷嘴冷却到此温度以下时关闭",edit:"编辑",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',turnOnConfirm:'确定要开启"{{name}}"吗？',turnOffConfirm:'确定要关闭"{{name}}"吗？这将切断连接设备的电源。',failedToTurn:'无法{{action}}"{{name}}"',unknown:"未知",addTitle:"添加智能插座",editTitle:"编辑智能插座",stopScanning:"停止扫描",discoverTasmota:"发现Tasmota设备",foundDevices:"找到{{count}}个设备 - 点击选择：",noDevicesFound:"未在您的网络中找到Tasmota设备",haNotConfigured:"Home Assistant未配置。请在以下位置设置",haSettingsPath:"设置 → 网络 → Home Assistant",selectEntity:"选择实体 *",ipAddress:"IP地址 *",nameLabel:"名称 *",username:"用户名",password:"密码",authHint:"如果您的Tasmota设备不需要认证，请留空",linkToPrinter:"关联打印机",noPrinter:"无打印机（仅手动控制）",linkingDescription:"关联后可在打印开始/完成时自动开关",powerAlerts:"功率警报",alertAbove:"高于时警报（W）",alertBelow:"低于时警报（W）",alertDescription:"当电力消耗超过这些阈值时收到通知。留空以禁用该方向。",dailySchedule:"每日计划",turnOnAt:"开启时间",turnOffAt:"关闭时间",scheduleDescription:"每天在这些时间自动开关插座。留空以跳过该操作。",showOnPrinterCard:"在打印机卡片上显示",displayOnPrinterCard:"在打印机卡片上显示按钮",connectedResult:"已连接！",deviceLabel:"设备：{{name}} - ",stateLabel:"状态：{{state}}",test:"测试",delete:"删除",save:"保存",add:"添加",cancel:"取消",failedToStartScan:"无法开始扫描",nameRequired:"名称为必填项",entityRequired:"Home Assistant插座需要实体",mqttTopicRequired:"必须为功率、能源或状态监控配置至少一个MQTT主题",loadingEntities:"正在加载实体...",loading:"加载中...",failedToLoadEntities:"加载实体失败：{{error}}",noEntitiesMatching:'未找到匹配"{{search}}"的实体',noEntitiesAvailable:"无可用实体",searchingEntities:"搜索所有实体（找到{{count}}个）",showingEntities:"显示 switch、light、input_boolean（{{count}}个可用）",energyMonitoringOptional:"能源监控（可选）",energyMonitoringHint:"搜索并选择提供功率/能源数据的传感器。",powerSensorW:"功率传感器（W）",energyTodayKwh:"今日能源（kWh）",totalEnergyKwh:"总能源（kWh）",noMatchingSensors:"无匹配的传感器",none:"无",mqttNotConfigured:"MQTT代理未配置。请在以下位置设置代理地址",mqttSettingsPath:"设置 → 网络 → MQTT发布",mqttNotConfiguredSuffix:"（您不需要启用发布，只需填写代理详细信息）。",mqttMonitorOnlyDescription:"MQTT插座通过MQTT订阅接收功率/能源数据。开关控制不可用 - 请使用您的MQTT代理或家庭自动化系统。",powerMonitoring:"功率监控",energyMonitoring:"能源监控",stateMonitoring:"状态监控",optional:"可选",topic:"主题",jsonPath:"JSON路径",multiplier:"乘数",onValue:"ON值",mqttPowerHint:`JSON路径从JSON负载中提取值（例如"power_l1"）。如果主题发布原始数值，请留空。 乘数：mW→W使用0.001，kW→W使用1000。`,mqttEnergyHint:`JSON路径从JSON负载中提取值。原始值请留空。 乘数：Wh→kWh使用0.001，MWh→kWh使用1000。`,mqttStateHint:`JSON路径从JSON负载中提取值。原始值请留空。 -ON值：表示"ON"的确切字符串。留空以自动检测（ON、true、1）。`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"功率URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"功率乘数",restEnergyUrl:"能耗URL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"能耗乘数",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"功率数据的独立URL（留空则使用状态URL）",restEnergyUrlHint:"能耗数据的独立URL（留空则使用状态URL）",restEnergyHint:"每个值可以使用独立的URL，或回退到状态URL。使用乘数进行单位转换（例如：0.001 将 Wh 转换为 kWh）。",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"开关栏中没有开关",enableSwitchbarHint:'在设置 > 智能插座中启用"在开关栏显示"'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"电子邮件",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP 电子邮件通知",telegram:"通过 Telegram 机器人发送通知",discord:"通过 Webhook 发送到 Discord 频道",ntfy:"免费、可自托管的推送通知",pushover:"简单、可靠的推送通知",callmebot:"通过 CallMeBot 免费发送 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL",homeassistant:"Home Assistant 仪表板中的持久通知"},lastSuccess:"上次：{{date}}",error:"错误",printer:"打印机：",allPrinters:"所有打印机",sendTestNotification:"发送测试通知",eventSettings:"事件设置",enabled:"已启用",sendFromProvider:"从此提供商发送通知",printEvents:"打印事件",printerStatus:"打印机状态",amsAlarms:"AMS 警报",amsHtAlarms:"AMS-HT 警报",printQueue:"打印队列",start:"开始",plateCheck:"热床检测",complete:"完成",failed:"失败",stopped:"已停止",progress:"进度",offline:"离线",lowFilament:"耗材不足",maintenance:"维护",amsHumidity:"AMS 湿度",amsTemp:"AMS 温度",amsHtHumidity:"AMS-HT 湿度",amsHtTemp:"AMS-HT 温度",bedCooled:"热床已冷却",firstLayer:"首层完成",quiet:"免打扰",digest:"摘要 {{time}}",printStarted:"打印已开始",plateNotEmpty:"热床非空",plateNotEmptyDescription:"打印前检测到物体",printCompleted:"打印已完成",bedCooledLabel:"热床已冷却",bedCooledDescription:"打印后热床温度降至阈值以下",firstLayerCompleteLabel:"首层打印完成",firstLayerCompleteDescription:"首层完成时发送带照片的通知",missingSpoolAssignmentLabel:"缺少料卷分配",missingSpoolAssignmentDescription:"当打印开始且所需料盘没有分配料卷时发送通知",printFailed:"打印失败",printStopped:"打印已停止",progressMilestones:"进度里程碑",progressMilestonesDescription:"在 25%、50%、75% 时通知",printerOffline:"打印机离线",printerError:"打印机错误",lowFilamentLabel:"耗材不足",maintenanceDue:"需要维护",maintenanceDueDescription:"需要维护时通知",amsHumidityHigh:"AMS 湿度过高",amsHumidityHighDescription:"普通 AMS 湿度超过阈值",amsTemperatureHigh:"AMS 温度过高",amsTemperatureHighDescription:"普通 AMS 温度超过阈值",amsHtHumidityHigh:"AMS-HT 湿度过高",amsHtHumidityHighDescription:"AMS-HT 湿度超过阈值",amsHtTemperatureHigh:"AMS-HT 温度过高",amsHtTemperatureHighDescription:"AMS-HT 温度超过阈值",jobAdded:"任务已添加",jobAddedDescription:"任务已添加到队列",jobAssigned:"任务已分配",jobAssignedDescription:"基于模型的任务已分配给打印机",jobStarted:"任务已开始",jobStartedDescription:"队列任务已开始打印",jobWaiting:"任务等待中",jobWaitingDescription:"任务正在等待耗材或打印机",jobSkipped:"任务已跳过",jobSkippedDescription:"任务已跳过（上一个失败）",jobFailed:"任务失败",jobFailedDescription:"任务启动失败",queueComplete:"队列已完成",queueCompleteDescription:"所有队列任务已完成",quietHours:"免打扰时段",noNotificationsDuring:"在此时段内不发送通知",editProviderToChangeQuietHours:"编辑提供商以更改免打扰时段",dailyDigest:"每日摘要",batchNotifications:"将通知汇总为每日摘要",sendAt:"发送于 {{time}}",editProviderToChangeDigestTime:"编辑提供商以更改摘要时间",edit:"编辑",deleteProvider:"删除通知提供商",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',delete:"删除",addTitle:"添加通知提供商",editTitle:"编辑通知提供商",nameLabel:"名称 *",namePlaceholder:"我的通知",providerTypeLabel:"提供商类型 *",configuration:"配置",testConfiguration:"测试配置",printerFilter:"打印机筛选",onlyFromPrinter:"仅发送来自此打印机的事件通知",quietHoursDnd:"免打扰时段",quietStart:"开始",quietEnd:"结束",dailyDigestLabel:"每日摘要",sendDigestAt:"发送摘要于",digestCollected:"事件将被收集并在此时间作为单条摘要发送",notificationEvents:"通知事件",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（打印完成后）",cancel:"取消",save:"保存",add:"添加",nameRequired:"名称为必填项",fieldRequired:"{{field}}为必填项",phoneNumber:"电话号码",apiKey:"API 密钥",serverUrl:"服务器 URL",topic:"主题",authToken:"认证令牌",userKey:"用户密钥",appToken:"应用令牌",priority:"优先级",botToken:"机器人令牌",chatId:"聊天 ID",smtpServer:"SMTP 服务器",smtpPort:"SMTP 端口",security:"安全",authentication:"认证",username:"用户名",password:"密码",fromEmail:"发件人邮箱",toEmail:"收件人邮箱",webhookUrl:"Webhook URL",payloadFormat:"负载格式",authorization:"授权",titleFieldName:"标题字段名",messageFieldName:"消息字段名",editTemplate:"编辑模板：{{name}}",titleLabel:"标题",bodyLabel:"正文",titlePlaceholder:"通知标题...",bodyPlaceholder:"通知正文...",availableVariables:"可用变量",clickToInsert:"点击插入到正文光标位置",livePreview:"实时预览",hide:"隐藏",show:"显示",loadingPreview:"加载预览中...",enterTemplateContent:"输入模板内容以查看预览",titlePreview:"标题：",bodyPreview:"正文：",resetToDefault:"恢复默认",titleRequired:"标题为必填项",bodyRequired:"正文为必填项",notificationLog:"通知日志",showFailedOnly:"仅显示失败",last24Hours:"最近 24 小时",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",justNow:"刚刚",noFailedNotifications:"没有失败的通知",noNotificationsLogged:"没有通知记录",unknownProvider:"未知提供商",logTitle:"标题",logMessage:"消息",logError:"错误",logProvider:"提供商：{{type}}",logTime:"时间：{{time}}",refresh:"刷新",clearOld:"清除旧记录",statsSummary:"最近 {{days}} 天：",statsNotifications:"条通知",statsSent:"{{count}} 条已发送",statsFailed:"{{count}} 条失败",eventTypes:{print_start:"打印已开始",print_complete:"打印完成",print_failed:"打印失败",print_stopped:"打印已停止",print_progress:"进度",printer_offline:"打印机离线",printer_error:"打印机错误",filament_low:"耗材不足",maintenance_due:"需要维护",test:"测试"},userEmail:{title:"通知",emailNotifications:"邮件通知",emailNotificationsDesc:"接收您自己打印任务的邮件通知。邮件将通过高级身份验证中配置的 SMTP 设置发送。",sendingTo:"通知将发送至",noEmailWarning:"您的账户没有邮件地址。请联系管理员添加。",printJobNotifications:"打印任务通知",printJobNotificationsDesc:"选择哪些事件会触发您提交的打印任务的邮件通知。",printJobStarts:"打印任务开始",printJobStartsDesc:"当您的打印任务开始时收到通知。",printJobFinishes:"打印任务完成",printJobFinishesDesc:"当您的打印任务成功完成时收到通知。",printErrors:"打印错误",printErrorsDesc:"当您的打印任务失败或遇到错误时收到通知。",printJobStops:"打印任务停止",printJobStopsDesc:"当您的打印任务被取消或停止时收到通知。",saveSuccess:"通知偏好设置已保存。",saveError:"保存通知偏好设置失败。"}},richTextEditor:{bold:"粗体",italic:"斜体",underline:"下划线",bulletList:"无序列表",numberedList:"有序列表",alignLeft:"左对齐",alignCenter:"居中对齐",alignRight:"右对齐",addLink:"添加链接",removeLink:"移除链接"},externalLinks:{noLinksConfigured:"未配置外部链接",deleteLink:"删除链接",removeCustomIcon:"移除自定义图标",openInNewTab:"在新标签页中打开",placeholders:{linkName:"我的链接"}},keyboardShortcuts:{title:"键盘快捷键",navigation:"导航",archivesSection:"归档",kProfilesSection:"K 值配置",generalSection:"通用",shortcuts:{goToPrinters:"前往打印机",goToArchives:"前往归档",goToQueue:"前往队列",goToStats:"前往统计",goToProfiles:"前往云端配置",goToSettings:"前往设置",focusSearch:"聚焦搜索",openUploadModal:"打开上传对话框",clearSelection:"清除选择 / 取消焦点",contextMenu:"卡片右键菜单",refreshProfiles:"刷新配置",newProfile:"新建配置",exitSelectionMode:"退出选择模式",showHelp:"显示此帮助"},footer:"按 Esc 或点击外部关闭"},notificationLog:{title:"通知日志",events:{printStarted:"打印开始",printComplete:"打印完成",printFailed:"打印失败",printStopped:"打印停止",progress:"进度",printerOffline:"打印机离线",printerError:"打印机错误",lowFilament:"耗材不足",maintenanceDue:"维护到期",test:"测试"},timeAgo:{justNow:"刚刚",minutesAgo:"{{minutes}} 分钟前",hoursAgo:"{{hours}} 小时前"}},restoreBackup:{title:"恢复备份",restoring:"恢复中...",restoreComplete:"恢复完成",restoreFailed:"恢复失败",importSettings:"从备份文件导入设置",pleaseWait:"请稍候，正在恢复您的数据",clickToSelect:"点击选择备份文件（.json 或 .zip）",howDuplicateHandling:"重复处理方式：",categories:{printers:"打印机",smartPlugs:"智能插座",notificationProviders:"通知提供商",filaments:"耗材",archives:"归档",pendingUploads:"待处理上传",settingsTemplates:"设置和模板"},matchingInfo:{printers:"按序列号匹配",smartPlugs:"按 IP 地址匹配",notificationProviders:"按名称匹配",filaments:"按名称 + 类型 + 品牌匹配",archives:"按内容哈希匹配",pendingUploads:"按文件名匹配",settingsTemplates:"始终覆盖"},replaceExisting:"替换现有数据",keepExisting:"保留现有数据",replaceDescription:"用备份数据覆盖已存在的项目",keepDescription:"仅恢复不存在的项目",caution:"注意：",cautionText:"覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问码永远不会被覆盖。",itemsRestored:"已恢复项目",itemsSkipped:"已跳过项目",restored:"已恢复",skipped:"已跳过（已存在）",filesLabel:"文件（3MF、缩略图等）",newApiKeysGenerated:"已生成新 API 密钥",newApiKeysWarning:"这些密钥仅显示一次。请立即复制！",processingBackup:"处理备份文件中...",noDataFound:"备份文件中未找到可恢复的数据。",failedToRestore:"恢复备份失败。请检查文件格式。"},backupExport:{title:"导出备份",selectData:"选择要包含的数据",selectAll:"全选",selectNone:"全不选",categoryDescriptions:{settings:"语言、主题、更新偏好",notifications:"ntfy、Pushover、Discord 等",templates:"自定义消息模板",smartPlugs:"Tasmota 插座配置",externalLinks:"侧边栏外部服务链接",printers:"打印机信息（不含访问码）",plateDetection:"空打印板参考图像",filaments:"耗材类型和成本",maintenance:"自定义维护计划",archives:"所有打印数据 + 文件（3MF、缩略图、照片）",projects:"项目、材料清单和附件",pendingUploads:"虚拟打印机待审核的上传",apiKeys:"Webhook API 密钥（导入时生成新密钥）"},requiresPrinters:"需要选择打印机",zipFileWarning:"将创建 ZIP 文件。",zipFileDescription:"包括所有 3MF 文件、缩略图、延时摄影和照片。这可能需要一些时间并生成较大的文件。",includeAccessCodes:"包含访问码",includeAccessCodesDescription:"用于转移到另一台机器",includeAccessCodesWarning:"访问码将以明文形式包含。请妥善保管此备份文件！",categoriesSelected:"已选择 {{selectedCount}} 个类别"},pendingUploads:{placeholders:{notes:"添加关于此打印的备注..."},discardUpload:"丢弃上传",archiveAllUploads:"归档所有上传",discardAllUploads:"丢弃所有上传",archive:"归档",timeAgo:{justNow:"刚刚",minutesAgo:"{{minutes}} 分钟前",hoursAgo:"{{hours}} 小时前",daysAgo:"{{days}} 天前"}},apiBrowser:{placeholders:{requestBody:"JSON 请求体...",searchEndpoints:"搜索端点..."}},configureAmsSlot:{title:"配置 AMS 槽位",slotConfigured:"槽位已配置！",configuringSlot:"正在配置槽位：",slotLabel:"{{ams}} 槽位 {{slot}}",searchPresets:"搜索预设...",colorPlaceholder:"颜色名称或十六进制（例如：棕色、FF8800）",clearCustomColor:"清除自定义颜色",noCloudPresets:"无云端预设。登录拓竹云以同步。",noPresetsAvailable:"无可用预设。登录拓竹云或导入本地配置。",noMatchingPresets:"未找到匹配的预设。",custom:"自定义",builtin:"内置",settingsSentToPrinter:"设置已发送到打印机",filamentProfile:"耗材配置",kProfileLabel:"K 值配置（压力推进）",filteringFor:"筛选：{{material}}",noKProfile:"无 K 值配置（使用默认值 0.020）",noMatchingKProfiles:"未找到匹配的 K 值配置。将使用默认 K=0.020。",selectFilamentFirst:"请先选择耗材配置",kFromCalibration:"K={{value}}（来自打印机校准）",customColorLabel:"自定义颜色（可选）",presetColors:"{{name}} 颜色：",showLessColors:"显示更少颜色",showMoreColors:"显示更多颜色",clear:"清除",hexLabel:"十六进制：#{{hex}}",resetting:"重置中...",resetSlot:"重置槽位",cancel:"取消",configuring:"配置中...",configureSlot:"配置槽位"},githubBackup:{title:"GitHub 备份",history:"历史",downloadBackup:"下载备份",restoreBackup:"恢复备份",noBackupsYet:"暂无备份"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"搜索标签...",renameTag:"重命名标签",deleteTag:"删除标签"},notificationTemplates:{placeholders:{title:"通知标题...",body:"通知正文..."}},batchTag:{placeholders:{newTag:"输入新标签..."}},photoGallery:{deletePhoto:"删除照片"},filamentHoverCard:{copySpoolUuid:"复制耗材 UUID"},kProfilesView:{hasNote:"有备注",copyProfile:"复制配置"},layout:{openMenu:"打开菜单",noPermissionSystemInfo:"您没有查看系统信息的权限"},dashboard:{dragToReorder:"拖动以重新排列",hideWidget:"隐藏小部件"},notificationProviderCard:{deleteNotificationProvider:"删除通知提供商"},fileManagerModal:{closeFileManager:"关闭文件管理器",sortFiles:"排序文件",goToParentFolder:"返回上级文件夹",threeView:"3D 视图"},embeddedCameraViewer:{refreshStream:"刷新流",close:"关闭",zoomOut:"缩小",resetZoom:"重置缩放",zoomIn:"放大",dragToResize:"拖动调整大小"},timelapseViewer:{skipBack5s:"后退 5 秒",skipForward5s:"前进 5 秒"},notificationProviders:{descriptions:{email:"SMTP 邮件通知",telegram:"通过 Telegram 机器人通知",discord:"通过 Webhook 发送到 Discord 频道",ntfy:"免费、可自托管的推送通知",pushover:"简单、可靠的推送通知",callmebot:"通过 CallMeBot 的免费 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL"}},logViewer:{searchPlaceholder:"搜索消息或日志名称...",noLogEntries:"未找到日志条目"},switchbarPopover:{noSwitchesInSwitchbar:"切换栏中没有开关"},projectPageModal:{placeholders:{title:"标题",designer:"设计师",license:"许可证",description:"输入描述...",profileTitle:"配置标题",profileDescription:"配置描述..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"等待中",justNow:"刚刚",now:"现在",minsAgo:"{{count}} 分钟前",inMins:"{{count}} 分钟后",hoursAgo:"{{count}} 小时前",inHours:"{{count}} 小时后",daysAgo:"{{count}} 天前",inDays:"{{count}} 天后"},spoolbuddy:{nav:{dashboard:"仪表板",ams:"AMS",inventory:"库存",writeTag:"写入",settings:"设置"},status:{nfcReady:"NFC 就绪",nfcOff:"NFC 关闭",offline:"离线",online:"在线",noPrinters:"无打印机",deviceOffline:"设备离线",waitingConnection:"等待设备连接...",systemReady:"系统就绪",status:"状态"},dashboard:{readyToScan:"准备扫描",idleMessage:"将耗材放在秤上以识别",nfcHint:"NFC 标签将自动读取",device:"设备",syncWeight:"同步重量",weightSynced:"已同步！",unknownTag:"未知标签",newTag:"检测到新标签",onScale:"在秤上",linkSpool:"链接到耗材",linkTagTitle:"将标签链接到耗材",linkTag:"链接标签",selectSpool:"选择要链接此标签的耗材：",noUntagged:"未找到没有标签的耗材",tagDetected:"检测到标签",noTag:"无标签",tagId:"标签",grossWeight:"毛重",spoolSize:"耗材盘尺寸",close:"关闭",currentSpool:"当前耗材"},modal:{spoolDetected:"检测到耗材",assignToAms:"分配到 AMS",syncWeight:"同步重量",weightSynced:"已同步！",syncing:"同步中...",newTagDetected:"检测到新标签",addToInventory:"添加到库存",assignToAmsTitle:"分配到 AMS",selectSlot:"选择槽位",assign:"分配",assigning:"分配中...",assignSuccess:"已分配！",assignError:"分配耗材失败。请重试。",noPrinterSelected:"选择打印机...",noAmsDetected:"此打印机未检测到 AMS",slot:"槽位"},weight:{noReading:"无读数",stable:"稳定",measuring:"测量中...",tare:"去皮",calibrate:"校准"},spool:{remaining:"剩余",material:"材料",brand:"品牌",color:"颜色",coreWeight:"空盘",labelWeight:"标签",scaleWeight:"秤重",netWeight:"净重",lastUsed:"上次使用"},ams:{noData:"未检测到 AMS",connectAms:"连接 AMS 以查看耗材槽位",noPrinter:"未选择打印机",selectPrinter:"从顶部栏选择打印机",printerDisconnected:"打印机已断开",humidity:"湿度",level:"余量",active:"活跃",slot:"槽位",empty:"空"},inventory:{search:"搜索耗材...",empty:"库存中没有耗材",noResults:"没有匹配的耗材",spools:"个耗材",addSpool:"添加耗材"},settings:{tabDevice:"设备",tabDisplay:"显示",tabScale:"秤",tabUpdates:"更新",nfcReader:"NFC 读卡器",type:"类型",connection:"连接",notConnected:"不适用",deviceInfo:"设备信息",hostname:"主机",uptime:"运行时间",brightness:"亮度",saved:"已保存",noBacklight:"未检测到 DSI 背光。亮度控制需要 DSI 显示屏。",screenBlank:"屏幕熄灭超时",screenBlankDesc:"不活动后屏幕关闭。触摸唤醒。",displayNote:"亮度作为软件滤镜应用。",scaleCalibration:"秤校准",currentWeight:"当前重量",tareOffset:"去皮",calFactor:"系数",knownWeight:"已知重量",calStep1:"移除秤上所有物品并按设置零点。",calStep2:"将已知重量放在秤上。",setZero:"设置零点",calibrateNow:"校准",calibrated:"已校准",tareSet:"去皮命令已发送。等待设备响应...",tareFailed:"发送去皮命令失败",zeroSet:"零点已设置。将已知重量放在秤上。",calibrationDone:"校准完成！",calibrationFailed:"校准失败",lastCalibrated:"上次校准",stable:"稳定",settling:"稳定中...",firmware:"固件",scale:"秤",noDevice:"未找到 SpoolBuddy 设备",daemonVersion:"守护进程版本",currentVersion:"当前",versionPending:"等待守护进程...",checking:"检查中...",checkUpdates:"检查更新",updateAvailable:"有可用更新",updateInstructions:"通过 SSH 更新：运行 SpoolBuddy 安装脚本进行升级。",upToDate:"已是最新",includeBeta:"包含测试版本"},writeTag:{tabExisting:"现有耗材",tabNew:"新耗材",tabReplace:"替换标签",searchPlaceholder:"按材料、颜色、品牌搜索...",noUntaggedSpools:"没有无标签的耗材",noTaggedSpools:"没有有标签的耗材",selectSpool:"选择一个耗材，然后将空白 NTAG 放在读卡器上",placeTag:"将 NTAG 放在读卡器上",tagReady:"检测到标签 — 准备写入",writeTag:"写入标签",replaceTag:"替换标签",writing:"写入标签中...",waiting:"等待 SpoolBuddy...",writeSuccess:"标签写入成功！",writeFailed:"写入失败",queueFailed:"排队写入命令失败",tryAgain:"重试",cancel:"取消",replaceWarning:"旧标签将被取消链接。新标签将替换它。",deviceOffline:"SpoolBuddy 离线",material:"材料",colorName:"颜色名称",color:"颜色",brand:"品牌",weight:"重量 (g)",createSpool:"创建耗材",creating:"创建中...",spoolCreated:"耗材已创建！准备写入。",createFailed:"创建耗材失败"},quickMenu:{printerPower:"打印机电源",systemControls:"系统",restartDaemon:"重启守护进程",restartBrowser:"重启浏览器",reboot:"重启",shutdown:"关机",swipeToClose:"向下滑动关闭",confirmTitle:"确认",confirmShutdown:"确定要关闭SpoolBuddy吗？您需要物理访问才能重新开启。",confirmReboot:"确定要重启SpoolBuddy吗？",confirmRestartDaemon:"重启SpoolBuddy守护进程？NFC和秤将暂时不可用。",confirmRestartBrowser:"重启kiosk浏览器？屏幕将短暂变黑。",confirm:"确认",confirmPlugOn:"开启 {{name}}？",confirmPlugOff:"关闭 {{name}}？",turnOn:"开启",turnOff:"关闭"}},bugReport:{title:"报告错误",description:"描述",descriptionPlaceholder:"出了什么问题？请描述问题...",email:"邮箱（可选）",emailPlaceholder:"your@email.com",emailPrivacy:"如果提供，您的邮箱将包含在GitHub Issue的折叠部分中，以便维护者后续跟进。",screenshot:"截图",uploadOrPaste:"上传、粘贴或拖拽图片",dataCollectedSummary:"报告中包含哪些数据？",dataIncluded:"包含：",dataIncludedList:"应用版本、操作系统、架构、Python版本、数据库统计（仅计数）、打印机型号、喷嘴数量、固件版本、连接状态、集成状态（Spoolman、MQTT、HA）、非敏感设置、网络接口数量、Docker详情、依赖版本。",dataNeverIncluded:"绝不包含：",dataNeverIncludedList:"打印机名称、序列号、访问代码、密码、IP地址、邮箱地址、API密钥、令牌、Webhook URL、主机名或用户名。",submit:"提交",startLogging:"开始调试日志",stepEnableLogging:"调试日志已启用",stepReproduce:"请现在重现问题",stepStopLogging:"停止并提交报告",stopAndSubmit:"停止并提交",maxDuration:"{{minutes}}分钟后自动停止",stoppingLogs:"正在收集日志并提交...",submitting:"正在提交错误报告...",submitSuccess:"错误报告提交成功！",submitFailed:"提交错误报告失败",thankYou:"谢谢！",submitted:"您的错误报告已提交。",viewIssue:"查看Issue",unexpectedError:"发生了意外错误"},failureDetection:{title:"AI 故障检测",description:"通过自托管的 Obico ML API 监控打印,并对检测到的故障自动采取行动。",mlUrl:"Obico ML API 地址",mlUrlHint:"您自托管的 Obico ml_api 容器的基础 URL(例如 http://192.168.1.10:3333)。",test:"测试",testSuccess:"ML API 可访问且正常。",testFailed:"无法访问 ML API。",sensitivity:"灵敏度",sensitivityLow:"低(减少误报)",sensitivityMedium:"中(平衡)",sensitivityHigh:"高(更早检测,更多误报)",sensitivityHint:"调整触发警告和故障的置信度阈值。",action:"检测到故障时的操作",actionNotify:"仅通知",actionPause:"暂停打印",actionPauseOff:"暂停并切断电源",pollInterval:"检查间隔(秒)",pollIntervalHint:"打印过程中每台打印机的检查频率。最小 5 秒,最大 120 秒。",externalUrlMissing:"未设置外部 URL。",externalUrlHint:"ML API 通过 URL 获取相机截图。请在常规设置中设置外部 URL,以便 ML API 容器可以访问 Bambuddy。",perPrinterTitle:"监控的打印机",perPrinterHint:"选择检测服务要监视哪些打印机。",monitorAll:"监控所有已连接的打印机",statusTitle:"状态",serviceRunning:"服务运行中",thresholds:"低 / 高阈值",activePrinters:"活动打印",noActivePrints:"当前没有正在进行的打印。",historyTitle:"最近检测",noHistory:"暂无检测记录。"}},Yue={en:{translation:que},de:{translation:$ue},fr:{translation:Vue},ja:{translation:Gue},it:{translation:Wue},"pt-BR":{translation:Kue},"zh-CN":{translation:Xue}};uo.use(GY).use(wue).init({resources:Yue,fallbackLng:"en",supportedLngs:["en","de","fr","ja","it","pt-BR","zh-CN"],detection:{order:["localStorage","navigator","htmlTag"],lookupLocalStorage:"bambutrack_language",caches:["localStorage"]},interpolation:{escapeValue:!1},react:{useSuspense:!1}});const nH=[{code:"en",name:"English",nativeName:"English"},{code:"de",name:"German",nativeName:"Deutsch"},{code:"fr",name:"French",nativeName:"Français"},{code:"ja",name:"Japanese",nativeName:"日本語"},{code:"it",name:"Italian",nativeName:"Italiano"},{code:"pt-BR",name:"Portuguese (Brazil)",nativeName:"Português (Brasil)"},{code:"zh-CN",name:"Chinese (Simplified)",nativeName:"简体中文"}];var rH="popstate";function Que(t={}){function e(r,i){let{pathname:s,search:o,hash:l}=r.location;return z3("",{pathname:s,search:o,hash:l},i.state&&i.state.usr||null,i.state&&i.state.key||"default")}function n(r,i){return typeof i=="string"?i:V0(i)}return Jue(e,n,null,t)}function Pa(t,e){if(t===!1||t===null||typeof t>"u")throw new Error(e)}function ac(t,e){if(!t){typeof console<"u"&&console.warn(e);try{throw new Error(e)}catch{}}}function Zue(){return Math.random().toString(36).substring(2,10)}function aH(t,e){return{usr:t.state,key:t.key,idx:e}}function z3(t,e,n=null,r){return{pathname:typeof t=="string"?t:t.pathname,search:"",hash:"",...typeof e=="string"?oy(e):e,state:n,key:e&&e.key||r||Zue()}}function V0({pathname:t="/",search:e="",hash:n=""}){return e&&e!=="?"&&(t+=e.charAt(0)==="?"?e:"?"+e),n&&n!=="#"&&(t+=n.charAt(0)==="#"?n:"#"+n),t}function oy(t){let e={};if(t){let n=t.indexOf("#");n>=0&&(e.hash=t.substring(n),t=t.substring(0,n));let r=t.indexOf("?");r>=0&&(e.search=t.substring(r),t=t.substring(0,r)),t&&(e.pathname=t)}return e}function Jue(t,e,n,r={}){let{window:i=document.defaultView,v5Compat:s=!1}=r,o=i.history,l="POP",c=null,d=u();d==null&&(d=0,o.replaceState({...o.state,idx:d},""));function u(){return(o.state||{idx:null}).idx}function m(){l="POP";let g=u(),b=g==null?null:g-d;d=g,c&&c({action:l,location:v.location,delta:b})}function p(g,b){l="PUSH";let _=z3(v.location,g,b);d=u()+1;let C=aH(_,d),P=v.createHref(_);try{o.pushState(C,"",P)}catch(N){if(N instanceof DOMException&&N.name==="DataCloneError")throw N;i.location.assign(P)}s&&c&&c({action:l,location:v.location,delta:1})}function f(g,b){l="REPLACE";let _=z3(v.location,g,b);d=u();let C=aH(_,d),P=v.createHref(_);o.replaceState(C,"",P),s&&c&&c({action:l,location:v.location,delta:0})}function x(g){return eme(g)}let v={get action(){return l},get location(){return t(i,o)},listen(g){if(c)throw new Error("A history only accepts one active listener");return i.addEventListener(rH,m),c=g,()=>{i.removeEventListener(rH,m),c=null}},createHref(g){return e(i,g)},createURL:x,encodeLocation(g){let b=x(g);return{pathname:b.pathname,search:b.search,hash:b.hash}},push:p,replace:f,go(g){return o.go(g)}};return v}function eme(t,e=!1){let n="http://localhost";typeof window<"u"&&(n=window.location.origin!=="null"?window.location.origin:window.location.href),Pa(n,"No window.location.(origin|href) available to create URL");let r=typeof t=="string"?t:V0(t);return r=r.replace(/ $/,"%20"),!e&&r.startsWith("//")&&(r=n+r),new URL(r,n)}function WY(t,e,n="/"){return tme(t,e,n,!1)}function tme(t,e,n,r){let i=typeof e=="string"?oy(e):e,s=cm(i.pathname||"/",n);if(s==null)return null;let o=KY(t);nme(o);let l=null;for(let c=0;l==null&&c{let u={relativePath:d===void 0?o.path||"":d,caseSensitive:o.caseSensitive===!0,childrenIndex:l,route:o};if(u.relativePath.startsWith("/")){if(!u.relativePath.startsWith(r)&&c)return;Pa(u.relativePath.startsWith(r),`Absolute route path "${u.relativePath}" nested under path "${r}" is not valid. An absolute child route path must start with the combined path of all its parent routes.`),u.relativePath=u.relativePath.slice(r.length)}let m=Ju([r,u.relativePath]),p=n.concat(u);o.children&&o.children.length>0&&(Pa(o.index!==!0,`Index routes must not have child routes. Please remove all child routes from route path "${m}".`),KY(o.children,e,p,m,c)),!(o.path==null&&!o.index)&&e.push({path:m,score:cme(m,o.index),routesMeta:p})};return t.forEach((o,l)=>{if(o.path===""||!o.path?.includes("?"))s(o,l);else for(let c of XY(o.path))s(o,l,!0,c)}),e}function XY(t){let e=t.split("/");if(e.length===0)return[];let[n,...r]=e,i=n.endsWith("?"),s=n.replace(/\?$/,"");if(r.length===0)return i?[s,""]:[s];let o=XY(r.join("/")),l=[];return l.push(...o.map(c=>c===""?s:[s,c].join("/"))),i&&l.push(...o),l.map(c=>t.startsWith("/")&&c===""?"/":c)}function nme(t){t.sort((e,n)=>e.score!==n.score?n.score-e.score:dme(e.routesMeta.map(r=>r.childrenIndex),n.routesMeta.map(r=>r.childrenIndex)))}var rme=/^:[\w-]+$/,ame=3,ime=2,sme=1,ome=10,lme=-2,iH=t=>t==="*";function cme(t,e){let n=t.split("/"),r=n.length;return n.some(iH)&&(r+=lme),e&&(r+=ime),n.filter(i=>!iH(i)).reduce((i,s)=>i+(rme.test(s)?ame:s===""?sme:ome),r)}function dme(t,e){return t.length===e.length&&t.slice(0,-1).every((r,i)=>r===e[i])?t[t.length-1]-e[e.length-1]:0}function ume(t,e,n=!1){let{routesMeta:r}=t,i={},s="/",o=[];for(let l=0;l{if(u==="*"){let x=l[p]||"";o=s.slice(0,s.length-x.length).replace(/(.)\/+$/,"$1")}const f=l[p];return m&&!f?d[u]=void 0:d[u]=(f||"").replace(/%2F/g,"/"),d},{}),pathname:s,pathnameBase:o,pattern:t}}function mme(t,e=!1,n=!0){ac(t==="*"||!t.endsWith("*")||t.endsWith("/*"),`Route path "${t}" will be treated as if it were "${t.replace(/\*$/,"/*")}" because the \`*\` character must always follow a \`/\` in the pattern. To get rid of this warning, please change the route path to "${t.replace(/\*$/,"/*")}".`);let r=[],i="^"+t.replace(/\/*\*?$/,"").replace(/^\/*/,"/").replace(/[\\.*+^${}|()[\]]/g,"\\$&").replace(/\/:([\w-]+)(\?)?/g,(o,l,c)=>(r.push({paramName:l,isOptional:c!=null}),c?"/?([^\\/]+)?":"/([^\\/]+)")).replace(/\/([\w-]+)\?(\/|$)/g,"(/$1)?$2");return t.endsWith("*")?(r.push({paramName:"*"}),i+=t==="*"||t==="/*"?"(.*)$":"(?:\\/(.+)|\\/*)$"):n?i+="\\/*$":t!==""&&t!=="/"&&(i+="(?:(?=\\/|$))"),[new RegExp(i,e?void 0:"i"),r]}function hme(t){try{return t.split("/").map(e=>decodeURIComponent(e).replace(/\//g,"%2F")).join("/")}catch(e){return ac(!1,`The URL path "${t}" could not be decoded because it is a malformed URL segment. This is probably due to a bad percent encoding (${e}).`),t}}function cm(t,e){if(e==="/")return t;if(!t.toLowerCase().startsWith(e.toLowerCase()))return null;let n=e.endsWith("/")?e.length-1:e.length,r=t.charAt(n);return r&&r!=="/"?null:t.slice(n)||"/"}var pme=/^(?:[a-z][a-z0-9+.-]*:|\/\/)/i;function fme(t,e="/"){let{pathname:n,search:r="",hash:i=""}=typeof t=="string"?oy(t):t,s;return n?(n=n.replace(/\/\/+/g,"/"),n.startsWith("/")?s=sH(n.substring(1),"/"):s=sH(n,e)):s=e,{pathname:s,search:xme(r),hash:yme(i)}}function sH(t,e){let n=e.replace(/\/+$/,"").split("/");return t.split("/").forEach(i=>{i===".."?n.length>1&&n.pop():i!=="."&&n.push(i)}),n.length>1?n.join("/"):"/"}function yM(t,e,n,r){return`Cannot include a '${t}' character in a manually specified \`to.${e}\` field [${JSON.stringify(r)}]. Please separate it out to the \`to.${n}\` field. Alternatively you may provide the full path as a string in and the router will parse it for you.`}function gme(t){return t.filter((e,n)=>n===0||e.route.path&&e.route.path.length>0)}function oO(t){let e=gme(t);return e.map((n,r)=>r===e.length-1?n.pathname:n.pathnameBase)}function lO(t,e,n,r=!1){let i;typeof t=="string"?i=oy(t):(i={...t},Pa(!i.pathname||!i.pathname.includes("?"),yM("?","pathname","search",i)),Pa(!i.pathname||!i.pathname.includes("#"),yM("#","pathname","hash",i)),Pa(!i.search||!i.search.includes("#"),yM("#","search","hash",i)));let s=t===""||i.pathname==="",o=s?"/":i.pathname,l;if(o==null)l=n;else{let m=e.length-1;if(!r&&o.startsWith("..")){let p=o.split("/");for(;p[0]==="..";)p.shift(),m-=1;i.pathname=p.join("/")}l=m>=0?e[m]:"/"}let c=fme(i,l),d=o&&o!=="/"&&o.endsWith("/"),u=(s||o===".")&&n.endsWith("/");return!c.pathname.endsWith("/")&&(d||u)&&(c.pathname+="/"),c}var Ju=t=>t.join("/").replace(/\/\/+/g,"/"),bme=t=>t.replace(/\/+$/,"").replace(/^\/*/,"/"),xme=t=>!t||t==="?"?"":t.startsWith("?")?t:"?"+t,yme=t=>!t||t==="#"?"":t.startsWith("#")?t:"#"+t,vme=class{constructor(t,e,n,r=!1){this.status=t,this.statusText=e||"",this.internal=r,n instanceof Error?(this.data=n.toString(),this.error=n):this.data=n}};function wme(t){return t!=null&&typeof t.status=="number"&&typeof t.statusText=="string"&&typeof t.internal=="boolean"&&"data"in t}function Sme(t){return t.map(e=>e.route.path).filter(Boolean).join("/").replace(/\/\/*/g,"/")||"/"}var YY=typeof window<"u"&&typeof window.document<"u"&&typeof window.document.createElement<"u";function QY(t,e){let n=t;if(typeof n!="string"||!pme.test(n))return{absoluteURL:void 0,isExternal:!1,to:n};let r=n,i=!1;if(YY)try{let s=new URL(window.location.href),o=n.startsWith("//")?new URL(s.protocol+n):new URL(n),l=cm(o.pathname,e);o.origin===s.origin&&l!=null?n=l+o.search+o.hash:i=!0}catch{ac(!1,` contains an invalid URL which will probably break when clicked - please update to a valid URL path.`)}return{absoluteURL:r,isExternal:i,to:n}}Object.getOwnPropertyNames(Object.prototype).sort().join("\0");var ZY=["POST","PUT","PATCH","DELETE"];new Set(ZY);var _me=["GET",...ZY];new Set(_me);var ly=w.createContext(null);ly.displayName="DataRouter";var DP=w.createContext(null);DP.displayName="DataRouterState";var kme=w.createContext(!1),JY=w.createContext({isTransitioning:!1});JY.displayName="ViewTransition";var Nme=w.createContext(new Map);Nme.displayName="Fetchers";var Cme=w.createContext(null);Cme.displayName="Await";var bl=w.createContext(null);bl.displayName="Navigation";var zw=w.createContext(null);zw.displayName="Location";var pc=w.createContext({outlet:null,matches:[],isDataRoute:!1});pc.displayName="Route";var cO=w.createContext(null);cO.displayName="RouteError";var eQ="REACT_ROUTER_ERROR",Pme="REDIRECT",Tme="ROUTE_ERROR_RESPONSE";function Ame(t){if(t.startsWith(`${eQ}:${Pme}:{`))try{let e=JSON.parse(t.slice(28));if(typeof e=="object"&&e&&typeof e.status=="number"&&typeof e.statusText=="string"&&typeof e.location=="string"&&typeof e.reloadDocument=="boolean"&&typeof e.replace=="boolean")return e}catch{}}function jme(t){if(t.startsWith(`${eQ}:${Tme}:{`))try{let e=JSON.parse(t.slice(40));if(typeof e=="object"&&e&&typeof e.status=="number"&&typeof e.statusText=="string")return new vme(e.status,e.statusText,e.data)}catch{}}function Mme(t,{relative:e}={}){Pa(cy(),"useHref() may be used only in the context of a component.");let{basename:n,navigator:r}=w.useContext(bl),{hash:i,pathname:s,search:o}=Bw(t,{relative:e}),l=s;return n!=="/"&&(l=s==="/"?n:Ju([n,s])),r.createHref({pathname:l,search:o,hash:i})}function cy(){return w.useContext(zw)!=null}function Kc(){return Pa(cy(),"useLocation() may be used only in the context of a component."),w.useContext(zw).location}var tQ="You should call navigate() in a React.useEffect(), not when your component is first rendered.";function nQ(t){w.useContext(bl).static||w.useLayoutEffect(t)}function Lo(){let{isDataRoute:t}=w.useContext(pc);return t?Vme():Eme()}function Eme(){Pa(cy(),"useNavigate() may be used only in the context of a component.");let t=w.useContext(ly),{basename:e,navigator:n}=w.useContext(bl),{matches:r}=w.useContext(pc),{pathname:i}=Kc(),s=JSON.stringify(oO(r)),o=w.useRef(!1);return nQ(()=>{o.current=!0}),w.useCallback((c,d={})=>{if(ac(o.current,tQ),!o.current)return;if(typeof c=="number"){n.go(c);return}let u=lO(c,JSON.parse(s),i,d.relative==="path");t==null&&e!=="/"&&(u.pathname=u.pathname==="/"?e:Ju([e,u.pathname])),(d.replace?n.replace:n.push)(u,d.state,d)},[e,n,s,i,t])}var rQ=w.createContext(null);function dy(){return w.useContext(rQ)}function Dme(t){let e=w.useContext(pc).outlet;return w.useMemo(()=>e&&w.createElement(rQ.Provider,{value:t},e),[e,t])}function Uw(){let{matches:t}=w.useContext(pc),e=t[t.length-1];return e?e.params:{}}function Bw(t,{relative:e}={}){let{matches:n}=w.useContext(pc),{pathname:r}=Kc(),i=JSON.stringify(oO(n));return w.useMemo(()=>lO(t,JSON.parse(i),r,e==="path"),[t,i,r,e])}function Fme(t,e){return aQ(t,e)}function aQ(t,e,n,r,i){Pa(cy(),"useRoutes() may be used only in the context of a component.");let{navigator:s}=w.useContext(bl),{matches:o}=w.useContext(pc),l=o[o.length-1],c=l?l.params:{},d=l?l.pathname:"/",u=l?l.pathnameBase:"/",m=l&&l.route;{let _=m&&m.path||"";sQ(d,!m||_.endsWith("*")||_.endsWith("*?"),`You rendered descendant (or called \`useRoutes()\`) at "${d}" (under ) but the parent route path has no trailing "*". This means if you navigate deeper, the parent won't match anymore and therefore the child routes will never render. +ON值：表示"ON"的确切字符串。留空以自动检测（ON、true、1）。`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"功率URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"功率乘数",restEnergyUrl:"能耗URL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"能耗乘数",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"功率数据的独立URL（留空则使用状态URL）",restEnergyUrlHint:"能耗数据的独立URL（留空则使用状态URL）",restEnergyHint:"每个值可以使用独立的URL，或回退到状态URL。使用乘数进行单位转换（例如：0.001 将 Wh 转换为 kWh）。",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"开关栏中没有开关",enableSwitchbarHint:'在设置 > 智能插座中启用"在开关栏显示"'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"电子邮件",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP 电子邮件通知",telegram:"通过 Telegram 机器人发送通知",discord:"通过 Webhook 发送到 Discord 频道",ntfy:"免费、可自托管的推送通知",pushover:"简单、可靠的推送通知",callmebot:"通过 CallMeBot 免费发送 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL",homeassistant:"Home Assistant 仪表板中的持久通知"},lastSuccess:"上次：{{date}}",error:"错误",printer:"打印机：",allPrinters:"所有打印机",sendTestNotification:"发送测试通知",eventSettings:"事件设置",enabled:"已启用",sendFromProvider:"从此提供商发送通知",printEvents:"打印事件",printerStatus:"打印机状态",amsAlarms:"AMS 警报",amsHtAlarms:"AMS-HT 警报",printQueue:"打印队列",start:"开始",plateCheck:"热床检测",complete:"完成",failed:"失败",stopped:"已停止",progress:"进度",offline:"离线",lowFilament:"耗材不足",maintenance:"维护",amsHumidity:"AMS 湿度",amsTemp:"AMS 温度",amsHtHumidity:"AMS-HT 湿度",amsHtTemp:"AMS-HT 温度",bedCooled:"热床已冷却",firstLayer:"首层完成",quiet:"免打扰",digest:"摘要 {{time}}",printStarted:"打印已开始",plateNotEmpty:"热床非空",plateNotEmptyDescription:"打印前检测到物体",printCompleted:"打印已完成",bedCooledLabel:"热床已冷却",bedCooledDescription:"打印后热床温度降至阈值以下",firstLayerCompleteLabel:"首层打印完成",firstLayerCompleteDescription:"首层完成时发送带照片的通知",missingSpoolAssignmentLabel:"缺少料卷分配",missingSpoolAssignmentDescription:"当打印开始且所需料盘没有分配料卷时发送通知",printFailed:"打印失败",printStopped:"打印已停止",progressMilestones:"进度里程碑",progressMilestonesDescription:"在 25%、50%、75% 时通知",printerOffline:"打印机离线",printerError:"打印机错误",lowFilamentLabel:"耗材不足",maintenanceDue:"需要维护",maintenanceDueDescription:"需要维护时通知",amsHumidityHigh:"AMS 湿度过高",amsHumidityHighDescription:"普通 AMS 湿度超过阈值",amsTemperatureHigh:"AMS 温度过高",amsTemperatureHighDescription:"普通 AMS 温度超过阈值",amsHtHumidityHigh:"AMS-HT 湿度过高",amsHtHumidityHighDescription:"AMS-HT 湿度超过阈值",amsHtTemperatureHigh:"AMS-HT 温度过高",amsHtTemperatureHighDescription:"AMS-HT 温度超过阈值",jobAdded:"任务已添加",jobAddedDescription:"任务已添加到队列",jobAssigned:"任务已分配",jobAssignedDescription:"基于模型的任务已分配给打印机",jobStarted:"任务已开始",jobStartedDescription:"队列任务已开始打印",jobWaiting:"任务等待中",jobWaitingDescription:"任务正在等待耗材或打印机",jobSkipped:"任务已跳过",jobSkippedDescription:"任务已跳过（上一个失败）",jobFailed:"任务失败",jobFailedDescription:"任务启动失败",queueComplete:"队列已完成",queueCompleteDescription:"所有队列任务已完成",quietHours:"免打扰时段",noNotificationsDuring:"在此时段内不发送通知",editProviderToChangeQuietHours:"编辑提供商以更改免打扰时段",dailyDigest:"每日摘要",batchNotifications:"将通知汇总为每日摘要",sendAt:"发送于 {{time}}",editProviderToChangeDigestTime:"编辑提供商以更改摘要时间",edit:"编辑",deleteProvider:"删除通知提供商",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',delete:"删除",addTitle:"添加通知提供商",editTitle:"编辑通知提供商",nameLabel:"名称 *",namePlaceholder:"我的通知",providerTypeLabel:"提供商类型 *",configuration:"配置",testConfiguration:"测试配置",printerFilter:"打印机筛选",onlyFromPrinter:"仅发送来自此打印机的事件通知",quietHoursDnd:"免打扰时段",quietStart:"开始",quietEnd:"结束",dailyDigestLabel:"每日摘要",sendDigestAt:"发送摘要于",digestCollected:"事件将被收集并在此时间作为单条摘要发送",notificationEvents:"通知事件",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（打印完成后）",cancel:"取消",save:"保存",add:"添加",nameRequired:"名称为必填项",fieldRequired:"{{field}}为必填项",phoneNumber:"电话号码",apiKey:"API 密钥",serverUrl:"服务器 URL",topic:"主题",authToken:"认证令牌",userKey:"用户密钥",appToken:"应用令牌",priority:"优先级",botToken:"机器人令牌",chatId:"聊天 ID",smtpServer:"SMTP 服务器",smtpPort:"SMTP 端口",security:"安全",authentication:"认证",username:"用户名",password:"密码",fromEmail:"发件人邮箱",toEmail:"收件人邮箱",webhookUrl:"Webhook URL",payloadFormat:"负载格式",authorization:"授权",titleFieldName:"标题字段名",messageFieldName:"消息字段名",editTemplate:"编辑模板：{{name}}",titleLabel:"标题",bodyLabel:"正文",titlePlaceholder:"通知标题...",bodyPlaceholder:"通知正文...",availableVariables:"可用变量",clickToInsert:"点击插入到正文光标位置",livePreview:"实时预览",hide:"隐藏",show:"显示",loadingPreview:"加载预览中...",enterTemplateContent:"输入模板内容以查看预览",titlePreview:"标题：",bodyPreview:"正文：",resetToDefault:"恢复默认",titleRequired:"标题为必填项",bodyRequired:"正文为必填项",notificationLog:"通知日志",showFailedOnly:"仅显示失败",last24Hours:"最近 24 小时",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",justNow:"刚刚",noFailedNotifications:"没有失败的通知",noNotificationsLogged:"没有通知记录",unknownProvider:"未知提供商",logTitle:"标题",logMessage:"消息",logError:"错误",logProvider:"提供商：{{type}}",logTime:"时间：{{time}}",refresh:"刷新",clearOld:"清除旧记录",statsSummary:"最近 {{days}} 天：",statsNotifications:"条通知",statsSent:"{{count}} 条已发送",statsFailed:"{{count}} 条失败",eventTypes:{print_start:"打印已开始",print_complete:"打印完成",print_failed:"打印失败",print_stopped:"打印已停止",print_progress:"进度",printer_offline:"打印机离线",printer_error:"打印机错误",filament_low:"耗材不足",maintenance_due:"需要维护",test:"测试"},userEmail:{title:"通知",emailNotifications:"邮件通知",emailNotificationsDesc:"接收您自己打印任务的邮件通知。邮件将通过高级身份验证中配置的 SMTP 设置发送。",sendingTo:"通知将发送至",noEmailWarning:"您的账户没有邮件地址。请联系管理员添加。",printJobNotifications:"打印任务通知",printJobNotificationsDesc:"选择哪些事件会触发您提交的打印任务的邮件通知。",printJobStarts:"打印任务开始",printJobStartsDesc:"当您的打印任务开始时收到通知。",printJobFinishes:"打印任务完成",printJobFinishesDesc:"当您的打印任务成功完成时收到通知。",printErrors:"打印错误",printErrorsDesc:"当您的打印任务失败或遇到错误时收到通知。",printJobStops:"打印任务停止",printJobStopsDesc:"当您的打印任务被取消或停止时收到通知。",saveSuccess:"通知偏好设置已保存。",saveError:"保存通知偏好设置失败。"}},richTextEditor:{bold:"粗体",italic:"斜体",underline:"下划线",bulletList:"无序列表",numberedList:"有序列表",alignLeft:"左对齐",alignCenter:"居中对齐",alignRight:"右对齐",addLink:"添加链接",removeLink:"移除链接"},externalLinks:{noLinksConfigured:"未配置外部链接",deleteLink:"删除链接",removeCustomIcon:"移除自定义图标",openInNewTab:"在新标签页中打开",placeholders:{linkName:"我的链接"}},keyboardShortcuts:{title:"键盘快捷键",navigation:"导航",archivesSection:"归档",kProfilesSection:"K 值配置",generalSection:"通用",shortcuts:{goToPrinters:"前往打印机",goToArchives:"前往归档",goToQueue:"前往队列",goToStats:"前往统计",goToProfiles:"前往云端配置",goToSettings:"前往设置",focusSearch:"聚焦搜索",openUploadModal:"打开上传对话框",clearSelection:"清除选择 / 取消焦点",contextMenu:"卡片右键菜单",refreshProfiles:"刷新配置",newProfile:"新建配置",exitSelectionMode:"退出选择模式",showHelp:"显示此帮助"},footer:"按 Esc 或点击外部关闭"},notificationLog:{title:"通知日志",events:{printStarted:"打印开始",printComplete:"打印完成",printFailed:"打印失败",printStopped:"打印停止",progress:"进度",printerOffline:"打印机离线",printerError:"打印机错误",lowFilament:"耗材不足",maintenanceDue:"维护到期",test:"测试"},timeAgo:{justNow:"刚刚",minutesAgo:"{{minutes}} 分钟前",hoursAgo:"{{hours}} 小时前"}},restoreBackup:{title:"恢复备份",restoring:"恢复中...",restoreComplete:"恢复完成",restoreFailed:"恢复失败",importSettings:"从备份文件导入设置",pleaseWait:"请稍候，正在恢复您的数据",clickToSelect:"点击选择备份文件（.json 或 .zip）",howDuplicateHandling:"重复处理方式：",categories:{printers:"打印机",smartPlugs:"智能插座",notificationProviders:"通知提供商",filaments:"耗材",archives:"归档",pendingUploads:"待处理上传",settingsTemplates:"设置和模板"},matchingInfo:{printers:"按序列号匹配",smartPlugs:"按 IP 地址匹配",notificationProviders:"按名称匹配",filaments:"按名称 + 类型 + 品牌匹配",archives:"按内容哈希匹配",pendingUploads:"按文件名匹配",settingsTemplates:"始终覆盖"},replaceExisting:"替换现有数据",keepExisting:"保留现有数据",replaceDescription:"用备份数据覆盖已存在的项目",keepDescription:"仅恢复不存在的项目",caution:"注意：",cautionText:"覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问码永远不会被覆盖。",itemsRestored:"已恢复项目",itemsSkipped:"已跳过项目",restored:"已恢复",skipped:"已跳过（已存在）",filesLabel:"文件（3MF、缩略图等）",newApiKeysGenerated:"已生成新 API 密钥",newApiKeysWarning:"这些密钥仅显示一次。请立即复制！",processingBackup:"处理备份文件中...",noDataFound:"备份文件中未找到可恢复的数据。",failedToRestore:"恢复备份失败。请检查文件格式。"},backupExport:{title:"导出备份",selectData:"选择要包含的数据",selectAll:"全选",selectNone:"全不选",categoryDescriptions:{settings:"语言、主题、更新偏好",notifications:"ntfy、Pushover、Discord 等",templates:"自定义消息模板",smartPlugs:"Tasmota 插座配置",externalLinks:"侧边栏外部服务链接",printers:"打印机信息（不含访问码）",plateDetection:"空打印板参考图像",filaments:"耗材类型和成本",maintenance:"自定义维护计划",archives:"所有打印数据 + 文件（3MF、缩略图、照片）",projects:"项目、材料清单和附件",pendingUploads:"虚拟打印机待审核的上传",apiKeys:"Webhook API 密钥（导入时生成新密钥）"},requiresPrinters:"需要选择打印机",zipFileWarning:"将创建 ZIP 文件。",zipFileDescription:"包括所有 3MF 文件、缩略图、延时摄影和照片。这可能需要一些时间并生成较大的文件。",includeAccessCodes:"包含访问码",includeAccessCodesDescription:"用于转移到另一台机器",includeAccessCodesWarning:"访问码将以明文形式包含。请妥善保管此备份文件！",categoriesSelected:"已选择 {{selectedCount}} 个类别"},pendingUploads:{placeholders:{notes:"添加关于此打印的备注..."},discardUpload:"丢弃上传",archiveAllUploads:"归档所有上传",discardAllUploads:"丢弃所有上传",archive:"归档",timeAgo:{justNow:"刚刚",minutesAgo:"{{minutes}} 分钟前",hoursAgo:"{{hours}} 小时前",daysAgo:"{{days}} 天前"}},apiBrowser:{placeholders:{requestBody:"JSON 请求体...",searchEndpoints:"搜索端点..."}},configureAmsSlot:{title:"配置 AMS 槽位",slotConfigured:"槽位已配置！",configuringSlot:"正在配置槽位：",slotLabel:"{{ams}} 槽位 {{slot}}",searchPresets:"搜索预设...",colorPlaceholder:"颜色名称或十六进制（例如：棕色、FF8800）",clearCustomColor:"清除自定义颜色",noCloudPresets:"无云端预设。登录拓竹云以同步。",noPresetsAvailable:"无可用预设。登录拓竹云或导入本地配置。",noMatchingPresets:"未找到匹配的预设。",custom:"自定义",builtin:"内置",settingsSentToPrinter:"设置已发送到打印机",filamentProfile:"耗材配置",kProfileLabel:"K 值配置（压力推进）",filteringFor:"筛选：{{material}}",noKProfile:"无 K 值配置（使用默认值 0.020）",noMatchingKProfiles:"未找到匹配的 K 值配置。将使用默认 K=0.020。",selectFilamentFirst:"请先选择耗材配置",kFromCalibration:"K={{value}}（来自打印机校准）",customColorLabel:"自定义颜色（可选）",presetColors:"{{name}} 颜色：",showLessColors:"显示更少颜色",showMoreColors:"显示更多颜色",clear:"清除",hexLabel:"十六进制：#{{hex}}",resetting:"重置中...",resetSlot:"重置槽位",cancel:"取消",configuring:"配置中...",configureSlot:"配置槽位"},githubBackup:{title:"GitHub 备份",history:"历史",downloadBackup:"下载备份",restoreBackup:"恢复备份",noBackupsYet:"暂无备份"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"搜索标签...",renameTag:"重命名标签",deleteTag:"删除标签"},notificationTemplates:{placeholders:{title:"通知标题...",body:"通知正文..."}},batchTag:{placeholders:{newTag:"输入新标签..."}},photoGallery:{deletePhoto:"删除照片"},filamentHoverCard:{copySpoolUuid:"复制耗材 UUID"},kProfilesView:{hasNote:"有备注",copyProfile:"复制配置"},layout:{openMenu:"打开菜单",noPermissionSystemInfo:"您没有查看系统信息的权限"},dashboard:{dragToReorder:"拖动以重新排列",hideWidget:"隐藏小部件"},notificationProviderCard:{deleteNotificationProvider:"删除通知提供商"},fileManagerModal:{closeFileManager:"关闭文件管理器",sortFiles:"排序文件",goToParentFolder:"返回上级文件夹",threeView:"3D 视图"},embeddedCameraViewer:{refreshStream:"刷新流",close:"关闭",zoomOut:"缩小",resetZoom:"重置缩放",zoomIn:"放大",dragToResize:"拖动调整大小"},timelapseViewer:{skipBack5s:"后退 5 秒",skipForward5s:"前进 5 秒"},notificationProviders:{descriptions:{email:"SMTP 邮件通知",telegram:"通过 Telegram 机器人通知",discord:"通过 Webhook 发送到 Discord 频道",ntfy:"免费、可自托管的推送通知",pushover:"简单、可靠的推送通知",callmebot:"通过 CallMeBot 的免费 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL"}},logViewer:{searchPlaceholder:"搜索消息或日志名称...",noLogEntries:"未找到日志条目"},switchbarPopover:{noSwitchesInSwitchbar:"切换栏中没有开关"},projectPageModal:{placeholders:{title:"标题",designer:"设计师",license:"许可证",description:"输入描述...",profileTitle:"配置标题",profileDescription:"配置描述..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"等待中",justNow:"刚刚",now:"现在",minsAgo:"{{count}} 分钟前",inMins:"{{count}} 分钟后",hoursAgo:"{{count}} 小时前",inHours:"{{count}} 小时后",daysAgo:"{{count}} 天前",inDays:"{{count}} 天后"},spoolbuddy:{nav:{dashboard:"仪表板",ams:"AMS",inventory:"库存",writeTag:"写入",settings:"设置"},status:{nfcReady:"NFC 就绪",nfcOff:"NFC 关闭",offline:"离线",online:"在线",noPrinters:"无打印机",deviceOffline:"设备离线",waitingConnection:"等待设备连接...",systemReady:"系统就绪",status:"状态"},dashboard:{readyToScan:"准备扫描",idleMessage:"将耗材放在秤上以识别",nfcHint:"NFC 标签将自动读取",device:"设备",syncWeight:"同步重量",weightSynced:"已同步！",unknownTag:"未知标签",newTag:"检测到新标签",onScale:"在秤上",linkSpool:"链接到耗材",linkTagTitle:"将标签链接到耗材",linkTag:"链接标签",selectSpool:"选择要链接此标签的耗材：",noUntagged:"未找到没有标签的耗材",tagDetected:"检测到标签",noTag:"无标签",tagId:"标签",grossWeight:"毛重",spoolSize:"耗材盘尺寸",close:"关闭",currentSpool:"当前耗材"},modal:{spoolDetected:"检测到耗材",assignToAms:"分配到 AMS",syncWeight:"同步重量",weightSynced:"已同步！",syncing:"同步中...",newTagDetected:"检测到新标签",addToInventory:"添加到库存",assignToAmsTitle:"分配到 AMS",selectSlot:"选择槽位",assign:"分配",assigning:"分配中...",assignSuccess:"已分配！",assignError:"分配耗材失败。请重试。",noPrinterSelected:"选择打印机...",noAmsDetected:"此打印机未检测到 AMS",slot:"槽位"},weight:{noReading:"无读数",stable:"稳定",measuring:"测量中...",tare:"去皮",calibrate:"校准"},spool:{remaining:"剩余",material:"材料",brand:"品牌",color:"颜色",coreWeight:"空盘",labelWeight:"标签",scaleWeight:"秤重",netWeight:"净重",lastUsed:"上次使用"},ams:{noData:"未检测到 AMS",connectAms:"连接 AMS 以查看耗材槽位",noPrinter:"未选择打印机",selectPrinter:"从顶部栏选择打印机",printerDisconnected:"打印机已断开",humidity:"湿度",level:"余量",active:"活跃",slot:"槽位",empty:"空"},inventory:{search:"搜索耗材...",empty:"库存中没有耗材",noResults:"没有匹配的耗材",spools:"个耗材",addSpool:"添加耗材"},settings:{tabDevice:"设备",tabDisplay:"显示",tabScale:"秤",tabUpdates:"更新",nfcReader:"NFC 读卡器",type:"类型",connection:"连接",notConnected:"不适用",deviceInfo:"设备信息",hostname:"主机",uptime:"运行时间",brightness:"亮度",saved:"已保存",noBacklight:"未检测到 DSI 背光。亮度控制需要 DSI 显示屏。",screenBlank:"屏幕熄灭超时",screenBlankDesc:"不活动后屏幕关闭。触摸唤醒。",displayNote:"亮度作为软件滤镜应用。",scaleCalibration:"秤校准",currentWeight:"当前重量",tareOffset:"去皮",calFactor:"系数",knownWeight:"已知重量",calStep1:"移除秤上所有物品并按设置零点。",calStep2:"将已知重量放在秤上。",setZero:"设置零点",calibrateNow:"校准",calibrated:"已校准",tareSet:"去皮命令已发送。等待设备响应...",tareFailed:"发送去皮命令失败",zeroSet:"零点已设置。将已知重量放在秤上。",calibrationDone:"校准完成！",calibrationFailed:"校准失败",lastCalibrated:"上次校准",stable:"稳定",settling:"稳定中...",firmware:"固件",scale:"秤",noDevice:"未找到 SpoolBuddy 设备",daemonVersion:"守护进程版本",currentVersion:"当前",versionPending:"等待守护进程...",checking:"检查中...",checkUpdates:"检查更新",updateAvailable:"有可用更新",updateInstructions:"通过 SSH 更新：运行 SpoolBuddy 安装脚本进行升级。",upToDate:"已是最新",includeBeta:"包含测试版本"},writeTag:{tabExisting:"现有耗材",tabNew:"新耗材",tabReplace:"替换标签",searchPlaceholder:"按材料、颜色、品牌搜索...",noUntaggedSpools:"没有无标签的耗材",noTaggedSpools:"没有有标签的耗材",selectSpool:"选择一个耗材，然后将空白 NTAG 放在读卡器上",placeTag:"将 NTAG 放在读卡器上",tagReady:"检测到标签 — 准备写入",writeTag:"写入标签",replaceTag:"替换标签",writing:"写入标签中...",waiting:"等待 SpoolBuddy...",writeSuccess:"标签写入成功！",writeFailed:"写入失败",queueFailed:"排队写入命令失败",tryAgain:"重试",cancel:"取消",replaceWarning:"旧标签将被取消链接。新标签将替换它。",deviceOffline:"SpoolBuddy 离线",material:"材料",colorName:"颜色名称",color:"颜色",brand:"品牌",weight:"重量 (g)",createSpool:"创建耗材",creating:"创建中...",spoolCreated:"耗材已创建！准备写入。",createFailed:"创建耗材失败"},quickMenu:{printerPower:"打印机电源",systemControls:"系统",restartDaemon:"重启守护进程",restartBrowser:"重启浏览器",reboot:"重启",shutdown:"关机",swipeToClose:"向下滑动关闭",confirmTitle:"确认",confirmShutdown:"确定要关闭SpoolBuddy吗？您需要物理访问才能重新开启。",confirmReboot:"确定要重启SpoolBuddy吗？",confirmRestartDaemon:"重启SpoolBuddy守护进程？NFC和秤将暂时不可用。",confirmRestartBrowser:"重启kiosk浏览器？屏幕将短暂变黑。",confirm:"确认",confirmPlugOn:"开启 {{name}}？",confirmPlugOff:"关闭 {{name}}？",turnOn:"开启",turnOff:"关闭"}},bugReport:{title:"报告错误",description:"描述",descriptionPlaceholder:"出了什么问题？请描述问题...",email:"邮箱（可选）",emailPlaceholder:"your@email.com",emailPrivacy:"如果提供，您的邮箱将包含在GitHub Issue的折叠部分中，以便维护者后续跟进。",screenshot:"截图",uploadOrPaste:"上传、粘贴或拖拽图片",dataCollectedSummary:"报告中包含哪些数据？",dataIncluded:"包含：",dataIncludedList:"应用版本、操作系统、架构、Python版本、数据库统计（仅计数）、打印机型号、喷嘴数量、固件版本、连接状态、集成状态（Spoolman、MQTT、HA）、非敏感设置、网络接口数量、Docker详情、依赖版本。",dataNeverIncluded:"绝不包含：",dataNeverIncludedList:"打印机名称、序列号、访问代码、密码、IP地址、邮箱地址、API密钥、令牌、Webhook URL、主机名或用户名。",submit:"提交",startLogging:"开始调试日志",stepEnableLogging:"调试日志已启用",stepReproduce:"请现在重现问题",stepStopLogging:"停止并提交报告",stopAndSubmit:"停止并提交",maxDuration:"{{minutes}}分钟后自动停止",stoppingLogs:"正在收集日志并提交...",submitting:"正在提交错误报告...",submitSuccess:"错误报告提交成功！",submitFailed:"提交错误报告失败",thankYou:"谢谢！",submitted:"您的错误报告已提交。",viewIssue:"查看Issue",unexpectedError:"发生了意外错误"},failureDetection:{title:"AI 故障检测",description:"通过自托管的 Obico ML API 监控打印,并对检测到的故障自动采取行动。",mlUrl:"Obico ML API 地址",mlUrlHint:"您自托管的 Obico ml_api 容器的基础 URL(例如 http://192.168.1.10:3333)。",test:"测试",testSuccess:"ML API 可访问且正常。",testFailed:"无法访问 ML API。",sensitivity:"灵敏度",sensitivityLow:"低(减少误报)",sensitivityMedium:"中(平衡)",sensitivityHigh:"高(更早检测,更多误报)",sensitivityHint:"调整触发警告和故障的置信度阈值。",action:"检测到故障时的操作",actionNotify:"仅通知",actionPause:"暂停打印",actionPauseOff:"暂停并切断电源",pollInterval:"检查间隔(秒)",pollIntervalHint:"打印过程中每台打印机的检查频率。最小 5 秒,最大 120 秒。",externalUrlMissing:"未设置外部 URL。",externalUrlHint:"ML API 通过 URL 获取相机截图。请在常规设置中设置外部 URL,以便 ML API 容器可以访问 Bambuddy。",perPrinterTitle:"监控的打印机",perPrinterHint:"选择检测服务要监视哪些打印机。",monitorAll:"监控所有已连接的打印机",statusTitle:"状态",serviceRunning:"服务运行中",thresholds:"低 / 高阈值",activePrinters:"活动打印",noActivePrints:"当前没有正在进行的打印。",historyTitle:"最近检测",noHistory:"暂无检测记录。"}},Yue={en:{translation:que},de:{translation:$ue},fr:{translation:Vue},ja:{translation:Gue},it:{translation:Wue},"pt-BR":{translation:Kue},"zh-CN":{translation:Xue}};uo.use(GY).use(wue).init({resources:Yue,fallbackLng:"en",supportedLngs:["en","de","fr","ja","it","pt-BR","zh-CN"],detection:{order:["localStorage","navigator","htmlTag"],lookupLocalStorage:"bambutrack_language",caches:["localStorage"]},interpolation:{escapeValue:!1},react:{useSuspense:!1}});const nH=[{code:"en",name:"English",nativeName:"English"},{code:"de",name:"German",nativeName:"Deutsch"},{code:"fr",name:"French",nativeName:"Français"},{code:"ja",name:"Japanese",nativeName:"日本語"},{code:"it",name:"Italian",nativeName:"Italiano"},{code:"pt-BR",name:"Portuguese (Brazil)",nativeName:"Português (Brasil)"},{code:"zh-CN",name:"Chinese (Simplified)",nativeName:"简体中文"}];var rH="popstate";function Que(t={}){function e(r,i){let{pathname:s,search:o,hash:l}=r.location;return z3("",{pathname:s,search:o,hash:l},i.state&&i.state.usr||null,i.state&&i.state.key||"default")}function n(r,i){return typeof i=="string"?i:W0(i)}return Jue(e,n,null,t)}function Pa(t,e){if(t===!1||t===null||typeof t>"u")throw new Error(e)}function rc(t,e){if(!t){typeof console<"u"&&console.warn(e);try{throw new Error(e)}catch{}}}function Zue(){return Math.random().toString(36).substring(2,10)}function aH(t,e){return{usr:t.state,key:t.key,idx:e}}function z3(t,e,n=null,r){return{pathname:typeof t=="string"?t:t.pathname,search:"",hash:"",...typeof e=="string"?ly(e):e,state:n,key:e&&e.key||r||Zue()}}function W0({pathname:t="/",search:e="",hash:n=""}){return e&&e!=="?"&&(t+=e.charAt(0)==="?"?e:"?"+e),n&&n!=="#"&&(t+=n.charAt(0)==="#"?n:"#"+n),t}function ly(t){let e={};if(t){let n=t.indexOf("#");n>=0&&(e.hash=t.substring(n),t=t.substring(0,n));let r=t.indexOf("?");r>=0&&(e.search=t.substring(r),t=t.substring(0,r)),t&&(e.pathname=t)}return e}function Jue(t,e,n,r={}){let{window:i=document.defaultView,v5Compat:s=!1}=r,o=i.history,l="POP",c=null,d=u();d==null&&(d=0,o.replaceState({...o.state,idx:d},""));function u(){return(o.state||{idx:null}).idx}function m(){l="POP";let g=u(),b=g==null?null:g-d;d=g,c&&c({action:l,location:v.location,delta:b})}function p(g,b){l="PUSH";let _=z3(v.location,g,b);d=u()+1;let C=aH(_,d),P=v.createHref(_);try{o.pushState(C,"",P)}catch(N){if(N instanceof DOMException&&N.name==="DataCloneError")throw N;i.location.assign(P)}s&&c&&c({action:l,location:v.location,delta:1})}function f(g,b){l="REPLACE";let _=z3(v.location,g,b);d=u();let C=aH(_,d),P=v.createHref(_);o.replaceState(C,"",P),s&&c&&c({action:l,location:v.location,delta:0})}function x(g){return eme(g)}let v={get action(){return l},get location(){return t(i,o)},listen(g){if(c)throw new Error("A history only accepts one active listener");return i.addEventListener(rH,m),c=g,()=>{i.removeEventListener(rH,m),c=null}},createHref(g){return e(i,g)},createURL:x,encodeLocation(g){let b=x(g);return{pathname:b.pathname,search:b.search,hash:b.hash}},push:p,replace:f,go(g){return o.go(g)}};return v}function eme(t,e=!1){let n="http://localhost";typeof window<"u"&&(n=window.location.origin!=="null"?window.location.origin:window.location.href),Pa(n,"No window.location.(origin|href) available to create URL");let r=typeof t=="string"?t:W0(t);return r=r.replace(/ $/,"%20"),!e&&r.startsWith("//")&&(r=n+r),new URL(r,n)}function WY(t,e,n="/"){return tme(t,e,n,!1)}function tme(t,e,n,r){let i=typeof e=="string"?ly(e):e,s=cm(i.pathname||"/",n);if(s==null)return null;let o=KY(t);nme(o);let l=null;for(let c=0;l==null&&c{let u={relativePath:d===void 0?o.path||"":d,caseSensitive:o.caseSensitive===!0,childrenIndex:l,route:o};if(u.relativePath.startsWith("/")){if(!u.relativePath.startsWith(r)&&c)return;Pa(u.relativePath.startsWith(r),`Absolute route path "${u.relativePath}" nested under path "${r}" is not valid. An absolute child route path must start with the combined path of all its parent routes.`),u.relativePath=u.relativePath.slice(r.length)}let m=Ju([r,u.relativePath]),p=n.concat(u);o.children&&o.children.length>0&&(Pa(o.index!==!0,`Index routes must not have child routes. Please remove all child routes from route path "${m}".`),KY(o.children,e,p,m,c)),!(o.path==null&&!o.index)&&e.push({path:m,score:cme(m,o.index),routesMeta:p})};return t.forEach((o,l)=>{if(o.path===""||!o.path?.includes("?"))s(o,l);else for(let c of XY(o.path))s(o,l,!0,c)}),e}function XY(t){let e=t.split("/");if(e.length===0)return[];let[n,...r]=e,i=n.endsWith("?"),s=n.replace(/\?$/,"");if(r.length===0)return i?[s,""]:[s];let o=XY(r.join("/")),l=[];return l.push(...o.map(c=>c===""?s:[s,c].join("/"))),i&&l.push(...o),l.map(c=>t.startsWith("/")&&c===""?"/":c)}function nme(t){t.sort((e,n)=>e.score!==n.score?n.score-e.score:dme(e.routesMeta.map(r=>r.childrenIndex),n.routesMeta.map(r=>r.childrenIndex)))}var rme=/^:[\w-]+$/,ame=3,ime=2,sme=1,ome=10,lme=-2,iH=t=>t==="*";function cme(t,e){let n=t.split("/"),r=n.length;return n.some(iH)&&(r+=lme),e&&(r+=ime),n.filter(i=>!iH(i)).reduce((i,s)=>i+(rme.test(s)?ame:s===""?sme:ome),r)}function dme(t,e){return t.length===e.length&&t.slice(0,-1).every((r,i)=>r===e[i])?t[t.length-1]-e[e.length-1]:0}function ume(t,e,n=!1){let{routesMeta:r}=t,i={},s="/",o=[];for(let l=0;l{if(u==="*"){let x=l[p]||"";o=s.slice(0,s.length-x.length).replace(/(.)\/+$/,"$1")}const f=l[p];return m&&!f?d[u]=void 0:d[u]=(f||"").replace(/%2F/g,"/"),d},{}),pathname:s,pathnameBase:o,pattern:t}}function mme(t,e=!1,n=!0){rc(t==="*"||!t.endsWith("*")||t.endsWith("/*"),`Route path "${t}" will be treated as if it were "${t.replace(/\*$/,"/*")}" because the \`*\` character must always follow a \`/\` in the pattern. To get rid of this warning, please change the route path to "${t.replace(/\*$/,"/*")}".`);let r=[],i="^"+t.replace(/\/*\*?$/,"").replace(/^\/*/,"/").replace(/[\\.*+^${}|()[\]]/g,"\\$&").replace(/\/:([\w-]+)(\?)?/g,(o,l,c)=>(r.push({paramName:l,isOptional:c!=null}),c?"/?([^\\/]+)?":"/([^\\/]+)")).replace(/\/([\w-]+)\?(\/|$)/g,"(/$1)?$2");return t.endsWith("*")?(r.push({paramName:"*"}),i+=t==="*"||t==="/*"?"(.*)$":"(?:\\/(.+)|\\/*)$"):n?i+="\\/*$":t!==""&&t!=="/"&&(i+="(?:(?=\\/|$))"),[new RegExp(i,e?void 0:"i"),r]}function hme(t){try{return t.split("/").map(e=>decodeURIComponent(e).replace(/\//g,"%2F")).join("/")}catch(e){return rc(!1,`The URL path "${t}" could not be decoded because it is a malformed URL segment. This is probably due to a bad percent encoding (${e}).`),t}}function cm(t,e){if(e==="/")return t;if(!t.toLowerCase().startsWith(e.toLowerCase()))return null;let n=e.endsWith("/")?e.length-1:e.length,r=t.charAt(n);return r&&r!=="/"?null:t.slice(n)||"/"}var pme=/^(?:[a-z][a-z0-9+.-]*:|\/\/)/i;function fme(t,e="/"){let{pathname:n,search:r="",hash:i=""}=typeof t=="string"?ly(t):t,s;return n?(n=n.replace(/\/\/+/g,"/"),n.startsWith("/")?s=sH(n.substring(1),"/"):s=sH(n,e)):s=e,{pathname:s,search:xme(r),hash:yme(i)}}function sH(t,e){let n=e.replace(/\/+$/,"").split("/");return t.split("/").forEach(i=>{i===".."?n.length>1&&n.pop():i!=="."&&n.push(i)}),n.length>1?n.join("/"):"/"}function yM(t,e,n,r){return`Cannot include a '${t}' character in a manually specified \`to.${e}\` field [${JSON.stringify(r)}]. Please separate it out to the \`to.${n}\` field. Alternatively you may provide the full path as a string in and the router will parse it for you.`}function gme(t){return t.filter((e,n)=>n===0||e.route.path&&e.route.path.length>0)}function oO(t){let e=gme(t);return e.map((n,r)=>r===e.length-1?n.pathname:n.pathnameBase)}function lO(t,e,n,r=!1){let i;typeof t=="string"?i=ly(t):(i={...t},Pa(!i.pathname||!i.pathname.includes("?"),yM("?","pathname","search",i)),Pa(!i.pathname||!i.pathname.includes("#"),yM("#","pathname","hash",i)),Pa(!i.search||!i.search.includes("#"),yM("#","search","hash",i)));let s=t===""||i.pathname==="",o=s?"/":i.pathname,l;if(o==null)l=n;else{let m=e.length-1;if(!r&&o.startsWith("..")){let p=o.split("/");for(;p[0]==="..";)p.shift(),m-=1;i.pathname=p.join("/")}l=m>=0?e[m]:"/"}let c=fme(i,l),d=o&&o!=="/"&&o.endsWith("/"),u=(s||o===".")&&n.endsWith("/");return!c.pathname.endsWith("/")&&(d||u)&&(c.pathname+="/"),c}var Ju=t=>t.join("/").replace(/\/\/+/g,"/"),bme=t=>t.replace(/\/+$/,"").replace(/^\/*/,"/"),xme=t=>!t||t==="?"?"":t.startsWith("?")?t:"?"+t,yme=t=>!t||t==="#"?"":t.startsWith("#")?t:"#"+t,vme=class{constructor(t,e,n,r=!1){this.status=t,this.statusText=e||"",this.internal=r,n instanceof Error?(this.data=n.toString(),this.error=n):this.data=n}};function wme(t){return t!=null&&typeof t.status=="number"&&typeof t.statusText=="string"&&typeof t.internal=="boolean"&&"data"in t}function Sme(t){return t.map(e=>e.route.path).filter(Boolean).join("/").replace(/\/\/*/g,"/")||"/"}var YY=typeof window<"u"&&typeof window.document<"u"&&typeof window.document.createElement<"u";function QY(t,e){let n=t;if(typeof n!="string"||!pme.test(n))return{absoluteURL:void 0,isExternal:!1,to:n};let r=n,i=!1;if(YY)try{let s=new URL(window.location.href),o=n.startsWith("//")?new URL(s.protocol+n):new URL(n),l=cm(o.pathname,e);o.origin===s.origin&&l!=null?n=l+o.search+o.hash:i=!0}catch{rc(!1,` contains an invalid URL which will probably break when clicked - please update to a valid URL path.`)}return{absoluteURL:r,isExternal:i,to:n}}Object.getOwnPropertyNames(Object.prototype).sort().join("\0");var ZY=["POST","PUT","PATCH","DELETE"];new Set(ZY);var _me=["GET",...ZY];new Set(_me);var cy=w.createContext(null);cy.displayName="DataRouter";var DP=w.createContext(null);DP.displayName="DataRouterState";var kme=w.createContext(!1),JY=w.createContext({isTransitioning:!1});JY.displayName="ViewTransition";var Nme=w.createContext(new Map);Nme.displayName="Fetchers";var Cme=w.createContext(null);Cme.displayName="Await";var gl=w.createContext(null);gl.displayName="Navigation";var Bw=w.createContext(null);Bw.displayName="Location";var hc=w.createContext({outlet:null,matches:[],isDataRoute:!1});hc.displayName="Route";var cO=w.createContext(null);cO.displayName="RouteError";var eQ="REACT_ROUTER_ERROR",Pme="REDIRECT",Tme="ROUTE_ERROR_RESPONSE";function Ame(t){if(t.startsWith(`${eQ}:${Pme}:{`))try{let e=JSON.parse(t.slice(28));if(typeof e=="object"&&e&&typeof e.status=="number"&&typeof e.statusText=="string"&&typeof e.location=="string"&&typeof e.reloadDocument=="boolean"&&typeof e.replace=="boolean")return e}catch{}}function jme(t){if(t.startsWith(`${eQ}:${Tme}:{`))try{let e=JSON.parse(t.slice(40));if(typeof e=="object"&&e&&typeof e.status=="number"&&typeof e.statusText=="string")return new vme(e.status,e.statusText,e.data)}catch{}}function Mme(t,{relative:e}={}){Pa(dy(),"useHref() may be used only in the context of a component.");let{basename:n,navigator:r}=w.useContext(gl),{hash:i,pathname:s,search:o}=qw(t,{relative:e}),l=s;return n!=="/"&&(l=s==="/"?n:Ju([n,s])),r.createHref({pathname:l,search:o,hash:i})}function dy(){return w.useContext(Bw)!=null}function Kc(){return Pa(dy(),"useLocation() may be used only in the context of a component."),w.useContext(Bw).location}var tQ="You should call navigate() in a React.useEffect(), not when your component is first rendered.";function nQ(t){w.useContext(gl).static||w.useLayoutEffect(t)}function Lo(){let{isDataRoute:t}=w.useContext(hc);return t?Vme():Eme()}function Eme(){Pa(dy(),"useNavigate() may be used only in the context of a component.");let t=w.useContext(cy),{basename:e,navigator:n}=w.useContext(gl),{matches:r}=w.useContext(hc),{pathname:i}=Kc(),s=JSON.stringify(oO(r)),o=w.useRef(!1);return nQ(()=>{o.current=!0}),w.useCallback((c,d={})=>{if(rc(o.current,tQ),!o.current)return;if(typeof c=="number"){n.go(c);return}let u=lO(c,JSON.parse(s),i,d.relative==="path");t==null&&e!=="/"&&(u.pathname=u.pathname==="/"?e:Ju([e,u.pathname])),(d.replace?n.replace:n.push)(u,d.state,d)},[e,n,s,i,t])}var rQ=w.createContext(null);function uy(){return w.useContext(rQ)}function Dme(t){let e=w.useContext(hc).outlet;return w.useMemo(()=>e&&w.createElement(rQ.Provider,{value:t},e),[e,t])}function Hw(){let{matches:t}=w.useContext(hc),e=t[t.length-1];return e?e.params:{}}function qw(t,{relative:e}={}){let{matches:n}=w.useContext(hc),{pathname:r}=Kc(),i=JSON.stringify(oO(n));return w.useMemo(()=>lO(t,JSON.parse(i),r,e==="path"),[t,i,r,e])}function Fme(t,e){return aQ(t,e)}function aQ(t,e,n,r,i){Pa(dy(),"useRoutes() may be used only in the context of a component.");let{navigator:s}=w.useContext(gl),{matches:o}=w.useContext(hc),l=o[o.length-1],c=l?l.params:{},d=l?l.pathname:"/",u=l?l.pathnameBase:"/",m=l&&l.route;{let _=m&&m.path||"";sQ(d,!m||_.endsWith("*")||_.endsWith("*?"),`You rendered descendant (or called \`useRoutes()\`) at "${d}" (under ) but the parent route path has no trailing "*". This means if you navigate deeper, the parent won't match anymore and therefore the child routes will never render. -Please change the parent to .`)}let p=Kc(),f;if(e){let _=typeof e=="string"?oy(e):e;Pa(u==="/"||_.pathname?.startsWith(u),`When overriding the location using \`\` or \`useRoutes(routes, location)\`, the location pathname must begin with the portion of the URL pathname that was matched by all parent routes. The current pathname base is "${u}" but pathname "${_.pathname}" was given in the \`location\` prop.`),f=_}else f=p;let x=f.pathname||"/",v=x;if(u!=="/"){let _=u.replace(/^\//,"").split("/");v="/"+x.replace(/^\//,"").split("/").slice(_.length).join("/")}let g=WY(t,{pathname:v});ac(m||g!=null,`No routes matched location "${f.pathname}${f.search}${f.hash}" `),ac(g==null||g[g.length-1].route.element!==void 0||g[g.length-1].route.Component!==void 0||g[g.length-1].route.lazy!==void 0,`Matched leaf route at location "${f.pathname}${f.search}${f.hash}" does not have an element or Component. This means it will render an with a null value by default resulting in an "empty" page.`);let b=zme(g&&g.map(_=>Object.assign({},_,{params:Object.assign({},c,_.params),pathname:Ju([u,s.encodeLocation?s.encodeLocation(_.pathname.replace(/\?/g,"%3F").replace(/#/g,"%23")).pathname:_.pathname]),pathnameBase:_.pathnameBase==="/"?u:Ju([u,s.encodeLocation?s.encodeLocation(_.pathnameBase.replace(/\?/g,"%3F").replace(/#/g,"%23")).pathname:_.pathnameBase])})),o,n,r,i);return e&&b?w.createElement(zw.Provider,{value:{location:{pathname:"/",search:"",hash:"",state:null,key:"default",...f},navigationType:"POP"}},b):b}function Rme(){let t=$me(),e=wme(t)?`${t.status} ${t.statusText}`:t instanceof Error?t.message:JSON.stringify(t),n=t instanceof Error?t.stack:null,r="rgba(200,200,200, 0.5)",i={padding:"0.5rem",backgroundColor:r},s={padding:"2px 4px",backgroundColor:r},o=null;return console.error("Error handled by React Router default ErrorBoundary:",t),o=w.createElement(w.Fragment,null,w.createElement("p",null,"💿 Hey developer 👋"),w.createElement("p",null,"You can provide a way better UX than this when your app throws errors by providing your own ",w.createElement("code",{style:s},"ErrorBoundary")," or"," ",w.createElement("code",{style:s},"errorElement")," prop on your route.")),w.createElement(w.Fragment,null,w.createElement("h2",null,"Unexpected Application Error!"),w.createElement("h3",{style:{fontStyle:"italic"}},e),n?w.createElement("pre",{style:i},n):null,o)}var Lme=w.createElement(Rme,null),iQ=class extends w.Component{constructor(t){super(t),this.state={location:t.location,revalidation:t.revalidation,error:t.error}}static getDerivedStateFromError(t){return{error:t}}static getDerivedStateFromProps(t,e){return e.location!==t.location||e.revalidation!=="idle"&&t.revalidation==="idle"?{error:t.error,location:t.location,revalidation:t.revalidation}:{error:t.error!==void 0?t.error:e.error,location:e.location,revalidation:t.revalidation||e.revalidation}}componentDidCatch(t,e){this.props.onError?this.props.onError(t,e):console.error("React Router caught the following error during render",t)}render(){let t=this.state.error;if(this.context&&typeof t=="object"&&t&&"digest"in t&&typeof t.digest=="string"){const n=jme(t.digest);n&&(t=n)}let e=t!==void 0?w.createElement(pc.Provider,{value:this.props.routeContext},w.createElement(cO.Provider,{value:t,children:this.props.component})):this.props.children;return this.context?w.createElement(Ome,{error:t},e):e}};iQ.contextType=kme;var vM=new WeakMap;function Ome({children:t,error:e}){let{basename:n}=w.useContext(bl);if(typeof e=="object"&&e&&"digest"in e&&typeof e.digest=="string"){let r=Ame(e.digest);if(r){let i=vM.get(e);if(i)throw i;let s=QY(r.location,n);if(YY&&!vM.get(e))if(s.isExternal||r.reloadDocument)window.location.href=s.absoluteURL||s.to;else{const o=Promise.resolve().then(()=>window.__reactRouterDataRouter.navigate(s.to,{replace:r.replace}));throw vM.set(e,o),o}return w.createElement("meta",{httpEquiv:"refresh",content:`0;url=${s.absoluteURL||s.to}`})}}return t}function Ime({routeContext:t,match:e,children:n}){let r=w.useContext(ly);return r&&r.static&&r.staticContext&&(e.route.errorElement||e.route.ErrorBoundary)&&(r.staticContext._deepestRenderedBoundaryId=e.route.id),w.createElement(pc.Provider,{value:t},n)}function zme(t,e=[],n=null,r=null,i=null){if(t==null){if(!n)return null;if(n.errors)t=n.matches;else if(e.length===0&&!n.initialized&&n.matches.length>0)t=n.matches;else return null}let s=t,o=n?.errors;if(o!=null){let u=s.findIndex(m=>m.route.id&&o?.[m.route.id]!==void 0);Pa(u>=0,`Could not find a matching route for errors on route IDs: ${Object.keys(o).join(",")}`),s=s.slice(0,Math.min(s.length,u+1))}let l=!1,c=-1;if(n)for(let u=0;u=0?s=s.slice(0,c+1):s=[s[0]];break}}}let d=n&&r?(u,m)=>{r(u,{location:n.location,params:n.matches?.[0]?.params??{},unstable_pattern:Sme(n.matches),errorInfo:m})}:void 0;return s.reduceRight((u,m,p)=>{let f,x=!1,v=null,g=null;n&&(f=o&&m.route.id?o[m.route.id]:void 0,v=m.route.errorElement||Lme,l&&(c<0&&p===0?(sQ("route-fallback",!1,"No `HydrateFallback` element provided to render during initial hydration"),x=!0,g=null):c===p&&(x=!0,g=m.route.hydrateFallbackElement||null)));let b=e.concat(s.slice(0,p+1)),_=()=>{let C;return f?C=v:x?C=g:m.route.Component?C=w.createElement(m.route.Component,null):m.route.element?C=m.route.element:C=u,w.createElement(Ime,{match:m,routeContext:{outlet:u,matches:b,isDataRoute:n!=null},children:C})};return n&&(m.route.ErrorBoundary||m.route.errorElement||p===0)?w.createElement(iQ,{location:n.location,revalidation:n.revalidation,component:v,error:f,children:_(),routeContext:{outlet:null,matches:b,isDataRoute:!0},onError:d}):_()},null)}function dO(t){return`${t} must be used within a data router. See https://reactrouter.com/en/main/routers/picking-a-router.`}function Ume(t){let e=w.useContext(ly);return Pa(e,dO(t)),e}function Bme(t){let e=w.useContext(DP);return Pa(e,dO(t)),e}function Hme(t){let e=w.useContext(pc);return Pa(e,dO(t)),e}function uO(t){let e=Hme(t),n=e.matches[e.matches.length-1];return Pa(n.route.id,`${t} can only be used on routes that contain a unique "id"`),n.route.id}function qme(){return uO("useRouteId")}function $me(){let t=w.useContext(cO),e=Bme("useRouteError"),n=uO("useRouteError");return t!==void 0?t:e.errors?.[n]}function Vme(){let{router:t}=Ume("useNavigate"),e=uO("useNavigate"),n=w.useRef(!1);return nQ(()=>{n.current=!0}),w.useCallback(async(i,s={})=>{ac(n.current,tQ),n.current&&(typeof i=="number"?await t.navigate(i):await t.navigate(i,{fromRouteId:e,...s}))},[t,e])}var oH={};function sQ(t,e,n){!e&&!oH[t]&&(oH[t]=!0,ac(!1,n))}w.memo(Gme);function Gme({routes:t,future:e,state:n,onError:r}){return aQ(t,void 0,n,r,e)}function Mx({to:t,replace:e,state:n,relative:r}){Pa(cy()," may be used only in the context of a component.");let{static:i}=w.useContext(bl);ac(!i," must not be used on the initial render in a . This is a no-op, but you should modify your code so the is only ever rendered in response to some user interaction or state change.");let{matches:s}=w.useContext(pc),{pathname:o}=Kc(),l=Lo(),c=lO(t,oO(s),o,r==="path"),d=JSON.stringify(c);return w.useEffect(()=>{l(JSON.parse(d),{replace:e,state:n,relative:r})},[l,d,r,e,n]),null}function oQ(t){return Dme(t.context)}function Dr(t){Pa(!1,"A is only ever to be used as the child of element, never rendered directly. Please wrap your in a .")}function Wme({basename:t="/",children:e=null,location:n,navigationType:r="POP",navigator:i,static:s=!1,unstable_useTransitions:o}){Pa(!cy(),"You cannot render a inside another . You should never have more than one in your app.");let l=t.replace(/^\/*/,"/"),c=w.useMemo(()=>({basename:l,navigator:i,static:s,unstable_useTransitions:o,future:{}}),[l,i,s,o]);typeof n=="string"&&(n=oy(n));let{pathname:d="/",search:u="",hash:m="",state:p=null,key:f="default"}=n,x=w.useMemo(()=>{let v=cm(d,l);return v==null?null:{location:{pathname:v,search:u,hash:m,state:p,key:f},navigationType:r}},[l,d,u,m,p,f,r]);return ac(x!=null,` is not able to match the URL "${d}${u}${m}" because it does not start with the basename, so the won't render anything.`),x==null?null:w.createElement(bl.Provider,{value:c},w.createElement(zw.Provider,{children:e,value:x}))}function Kme({children:t,location:e}){return Fme(U3(t),e)}function U3(t,e=[]){let n=[];return w.Children.forEach(t,(r,i)=>{if(!w.isValidElement(r))return;let s=[...e,i];if(r.type===w.Fragment){n.push.apply(n,U3(r.props.children,s));return}Pa(r.type===Dr,`[${typeof r.type=="string"?r.type:r.type.name}] is not a component. All component children of must be a or `),Pa(!r.props.index||!r.props.children,"An index route cannot have child routes.");let o={id:r.props.id||s.join("-"),caseSensitive:r.props.caseSensitive,element:r.props.element,Component:r.props.Component,index:r.props.index,path:r.props.path,middleware:r.props.middleware,loader:r.props.loader,action:r.props.action,hydrateFallbackElement:r.props.hydrateFallbackElement,HydrateFallback:r.props.HydrateFallback,errorElement:r.props.errorElement,ErrorBoundary:r.props.ErrorBoundary,hasErrorBoundary:r.props.hasErrorBoundary===!0||r.props.ErrorBoundary!=null||r.props.errorElement!=null,shouldRevalidate:r.props.shouldRevalidate,handle:r.props.handle,lazy:r.props.lazy};r.props.children&&(o.children=U3(r.props.children,s)),n.push(o)}),n}var jk="get",Mk="application/x-www-form-urlencoded";function FP(t){return typeof HTMLElement<"u"&&t instanceof HTMLElement}function Xme(t){return FP(t)&&t.tagName.toLowerCase()==="button"}function Yme(t){return FP(t)&&t.tagName.toLowerCase()==="form"}function Qme(t){return FP(t)&&t.tagName.toLowerCase()==="input"}function Zme(t){return!!(t.metaKey||t.altKey||t.ctrlKey||t.shiftKey)}function Jme(t,e){return t.button===0&&(!e||e==="_self")&&!Zme(t)}function B3(t=""){return new URLSearchParams(typeof t=="string"||Array.isArray(t)||t instanceof URLSearchParams?t:Object.keys(t).reduce((e,n)=>{let r=t[n];return e.concat(Array.isArray(r)?r.map(i=>[n,i]):[[n,r]])},[]))}function ehe(t,e){let n=B3(t);return e&&e.forEach((r,i)=>{n.has(i)||e.getAll(i).forEach(s=>{n.append(i,s)})}),n}var U_=null;function the(){if(U_===null)try{new FormData(document.createElement("form"),0),U_=!1}catch{U_=!0}return U_}var nhe=new Set(["application/x-www-form-urlencoded","multipart/form-data","text/plain"]);function wM(t){return t!=null&&!nhe.has(t)?(ac(!1,`"${t}" is not a valid \`encType\` for \`
\`/\`\` and will default to "${Mk}"`),null):t}function rhe(t,e){let n,r,i,s,o;if(Yme(t)){let l=t.getAttribute("action");r=l?cm(l,e):null,n=t.getAttribute("method")||jk,i=wM(t.getAttribute("enctype"))||Mk,s=new FormData(t)}else if(Xme(t)||Qme(t)&&(t.type==="submit"||t.type==="image")){let l=t.form;if(l==null)throw new Error('Cannot submit a