diff --git a/CHANGELOG.md b/CHANGELOG.md
index 549e90189..4dfe5750b 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -5,6 +5,8 @@ All notable changes to Bambuddy will be documented in this file.
 ## [0.2.4b2] - Unreleased
 
 ### Added
+- **Home Assistant addon detection — Settings → Updates and the in-app update banner now defer to the HA Supervisor** ([#1167](https://github.com/maziggy/bambuddy/issues/1167), reported by @Spegeli) — Bambuddy already shipped `HA_URL`/`HA_TOKEN` env-var support specifically labelled "for HA Add-on deployments" ([#283](https://github.com/maziggy/bambuddy/issues/283)) and a community-maintained HA addon (`hobbypunk90/homeassistant-addon-bambuddy`) exists upstream, so an HA-supervised installation is a real first-class deployment shape. Until now though, the update UI didn't know about it: HA addon users got the same "Update available!" banner as everyone else and, if they clicked through to Settings, saw the docker-compose snippet ("`docker compose pull && docker compose up -d`") which they cannot run from inside an HA addon container — that's the Supervisor's job. Detection uses the canonical signal: HA Supervisor injects `SUPERVISOR_TOKEN` into every addon container, and that variable is not set in any other environment. A new `_is_ha_addon()` helper in `backend/app/api/routes/updates.py` flips a request-level boolean which `/updates/check` surfaces as `is_ha_addon: bool` + an extended `update_method: 'git' | 'docker' | 'ha_addon'` enum. The check is checked **before** Docker on `/updates/apply` because HA addons *are* Docker containers — checking docker first would mis-classify them and serve the wrong message; the response also keeps `is_docker: true` alongside `is_ha_addon: true` so older frontend bundles still hit a managed-deployment branch (degrading to the Docker UX) instead of rendering an in-app Install button that can't work. Frontend branches identically: `SettingsPage.tsx`'s update card checks `is_ha_addon` first and renders "Updates are managed by the Home Assistant Supervisor. Open Settings → Add-ons → Bambuddy in Home Assistant to install the new version." in place of the docker-compose hint; `Layout.tsx`'s update banner is suppressed entirely for HA addons since the HA Supervisor's own update notification already surfaces the new version natively in the HA UI and a duplicate Bambuddy banner would just be noise that links to a page that says "go to HA". Plain Docker deployments are unaffected — the existing docker-compose hint and the in-app banner still render the same way they did. Localised across all 8 UI languages (en/de/fr/it/ja/pt-BR/zh-CN/zh-TW) with full translations of the new `settings.updateViaHomeAssistant` string. 6 new tests pin the contract: 3 backend unit tests for `_is_ha_addon()` (env var present → true, absent → false, empty string treated as unset to guard against shells that export it empty), 1 backend integration test for the HA-precedes-Docker rejection on `/updates/apply` (asserts the message says "Home Assistant" and not "Docker Compose"), 2 backend integration tests for `/updates/check` covering the HA-addon branch (`update_method == "ha_addon"`, both flags true) and the plain-Docker branch (`is_ha_addon: false`, `update_method == "docker"`); 2 frontend SettingsPage tests pin the mutually-exclusive UI rendering (HA branch shows the HA copy and not the docker-compose snippet; Docker branch shows the snippet and not the HA copy, neither shows the Install button); 2 frontend Layout tests pin the banner suppression for HA and its retention for plain Docker.
+
 - **Filament Track Switch (FTS) support — print modal filament dropdown is no longer empty when an X2D / H2D has the FTS accessory installed** ([#1162](https://github.com/maziggy/bambuddy/issues/1162), reported by @mkavalecz) — When the FTS accessory is installed the printer's MQTT changes one nibble of the per-AMS `info` bitmask: bits 8-11 flip from a fixed extruder ID (0x0 / 0x1) to `0xE` ("uninitialized"), because the AMS is no longer wired to a single nozzle — the FTS dynamically routes any slot to either extruder. Bambuddy's MQTT parser already skipped 0xE entries when building `ams_extruder_map` (matching BambuStudio's reading for boot-time transient state), so with the FTS installed the map ended up empty and the print modal's filament dropdown — which filters by `extruderId === nozzle_id` to prevent cross-nozzle assignment ("position of left hotend is abnormal" failures) — filtered out *every* loaded slot. Net effect: empty Filament Mapping dropdown on every dual-nozzle print with the FTS, even when the AMS was fully loaded with the right material. Detection comes from a new MQTT field — `print.device.fila_switch` — which is non-null only when the accessory is installed; it carries the routing topology as two arrays: `in[track] = currently fed slot (-1 = empty)` and `out[track] = extruder this track terminates at`. The fix surfaces this through a new `FilaSwitchState` dataclass on `PrinterState` (`installed`, `in_slots`, `out_extruders`, `stat`, `info`) and the equivalent `FilaSwitchResponse` Pydantic schema on the `GET /printers/{id}/status` route. Frontend (`useFilamentMapping.ts` + `FilamentMapping.tsx`) skips the per-extruder filter when `printerStatus.fila_switch?.installed === true` so any compatible AMS slot can satisfy any nozzle's filament requirement, since the FTS handles the routing. Slots currently fed into a track also get a routing badge in the dropdown — `[L]` or `[R]` — so the user can tell at a glance which slot the FTS is currently routing where (idle slots get no badge: they can be routed to either extruder on demand). The hard "no cross-nozzle assignment" filter on real dual-nozzle printers without the FTS stays untouched (still trips the same way it always has — `fila_switch == null` keeps the existing behaviour). 4 backend tests in `test_bambu_mqtt.py::TestFilamentTrackSwitchDetection` (default-not-installed, detect-from-MQTT-using-the-reporter's-bundle, no-fila_switch-field-stays-not-installed, missing-in-out-arrays-don't-crash) and 2 frontend tests in `useFilamentMapping.test.ts` (FTS-active drops the nozzle filter; explicit `fila_switch: null` keeps the filter applied). Upstream fila_switch payloads with anything other than the documented shape are tolerated — `installed` flips on the *presence* of the field, the routing arrays default to empty lists if missing, and the dropdown skips the badge for slots not currently in `in_slots`.
 
 ### Fixed
diff --git a/backend/app/api/routes/updates.py b/backend/app/api/routes/updates.py
index f940e27d4..ba2459a54 100644
--- a/backend/app/api/routes/updates.py
+++ b/backend/app/api/routes/updates.py
@@ -54,6 +54,16 @@ def _is_docker_environment() -> bool:
     return False
 
 
+def _is_ha_addon() -> bool:
+    """Detect if running as a Home Assistant Supervisor addon.
+
+    HA Supervisor injects ``SUPERVISOR_TOKEN`` into every addon container;
+    the variable is not set in any other environment, so a single env-var
+    check is sufficient with no false-positive surface.
+    """
+    return bool(os.environ.get("SUPERVISOR_TOKEN"))
+
+
 def _find_executable(name: str) -> str | None:
     """Find an executable in PATH or common locations."""
     # Try standard PATH first
@@ -355,6 +365,13 @@ async def check_for_updates(
             }
 
             is_docker = _is_docker_environment()
+            is_ha_addon = _is_ha_addon()
+            if is_ha_addon:
+                update_method = "ha_addon"
+            elif is_docker:
+                update_method = "docker"
+            else:
+                update_method = "git"
             return {
                 "update_available": update_available,
                 "current_version": APP_VERSION,
@@ -364,7 +381,8 @@ async def check_for_updates(
                 "release_url": release_url,
                 "published_at": published_at,
                 "is_docker": is_docker,
-                "update_method": "docker" if is_docker else "git",
+                "is_ha_addon": is_ha_addon,
+                "update_method": update_method,
             }
 
     except httpx.HTTPError as e:
@@ -669,7 +687,20 @@ async def apply_update(
             "status": _update_status,
         }
 
-    # Check if running in Docker
+    # Check for managed deployment shapes that own the update lifecycle.
+    # HA addons are also Docker, so check HA first to surface the more
+    # specific message.
+    if _is_ha_addon():
+        return {
+            "success": False,
+            "is_ha_addon": True,
+            "is_docker": True,
+            "message": (
+                "Bambuddy is running as a Home Assistant addon. "
+                "Updates are managed by the Home Assistant Supervisor "
+                "(Settings → Add-ons → Bambuddy → Update)."
+            ),
+        }
     if _is_docker_environment():
         return {
             "success": False,
diff --git a/backend/tests/integration/test_updates_api.py b/backend/tests/integration/test_updates_api.py
index 17d490794..fc8c41069 100644
--- a/backend/tests/integration/test_updates_api.py
+++ b/backend/tests/integration/test_updates_api.py
@@ -15,11 +15,34 @@ class TestUpdatesAPI:
 
     @pytest.mark.asyncio
     async def test_apply_update_docker_rejection(self, async_client: AsyncClient):
-        with patch("backend.app.api.routes.updates._is_docker_environment", return_value=True):
+        with (
+            patch("backend.app.api.routes.updates._is_ha_addon", return_value=False),
+            patch("backend.app.api.routes.updates._is_docker_environment", return_value=True),
+        ):
             response = await async_client.post("/api/v1/updates/apply")
         result = response.json()
         assert result["success"] is False
         assert result["is_docker"] is True
+        assert result.get("is_ha_addon") is not True
+        # Docker message tells the user to docker compose, not HA.
+        assert "Docker Compose" in result["message"]
+
+    @pytest.mark.asyncio
+    async def test_apply_update_ha_addon_rejection(self, async_client: AsyncClient):
+        """HA addons are also Docker, so the route must check HA first and
+        return the HA-specific message — otherwise users see "run docker
+        compose" advice they can't follow."""
+        with (
+            patch("backend.app.api.routes.updates._is_ha_addon", return_value=True),
+            patch("backend.app.api.routes.updates._is_docker_environment", return_value=True),
+        ):
+            response = await async_client.post("/api/v1/updates/apply")
+        result = response.json()
+        assert result["success"] is False
+        assert result["is_ha_addon"] is True
+        assert result["is_docker"] is True
+        assert "Home Assistant" in result["message"]
+        assert "Docker Compose" not in result["message"]
 
     @pytest.mark.asyncio
     async def test_apply_update_non_docker(self, async_client: AsyncClient):
@@ -27,6 +50,7 @@ class TestUpdatesAPI:
         to prevent side effects (network call to GitHub releases API + actual
         git/pip subprocesses)."""
         with (
+            patch("backend.app.api.routes.updates._is_ha_addon", return_value=False),
             patch("backend.app.api.routes.updates._is_docker_environment", return_value=False),
             patch(
                 "backend.app.api.routes.updates._discover_target_release",
@@ -44,6 +68,119 @@ class TestUpdatesAPI:
         with patch("os.path.exists", return_value=True):
             assert _is_docker_environment() is True
 
+    def test_is_ha_addon_detects_supervisor_token(self):
+        """HA Supervisor sets SUPERVISOR_TOKEN on every addon container.
+        That env-var alone is the canonical HA-addon signal."""
+        from backend.app.api.routes.updates import _is_ha_addon
+
+        with patch.dict("os.environ", {"SUPERVISOR_TOKEN": "abc123"}, clear=False):
+            assert _is_ha_addon() is True
+
+    def test_is_ha_addon_false_outside_supervisor(self):
+        from backend.app.api.routes.updates import _is_ha_addon
+
+        with patch.dict("os.environ", {}, clear=True):
+            assert _is_ha_addon() is False
+
+    def test_is_ha_addon_empty_token_treated_as_unset(self):
+        """An empty string is not a real token — guard against shells that
+        export the variable empty."""
+        from backend.app.api.routes.updates import _is_ha_addon
+
+        with patch.dict("os.environ", {"SUPERVISOR_TOKEN": ""}, clear=False):
+            assert _is_ha_addon() is False
+
+    @pytest.mark.asyncio
+    async def test_check_returns_ha_addon_flag_and_method(self, async_client: AsyncClient):
+        """`/updates/check` must surface the deployment shape so the frontend
+        can pick the right CTA. HA must take precedence over Docker because
+        HA addons run *inside* a Docker container — checking docker first
+        would mis-classify them."""
+        import httpx as _httpx
+
+        fake_release = {
+            "tag_name": "v999.9.9",
+            "name": "Far Future Release",
+            "body": "",
+            "html_url": "https://example.invalid/r",
+            "published_at": "2099-01-01T00:00:00Z",
+        }
+
+        class _Resp:
+            status_code = 200
+
+            def raise_for_status(self):
+                return None
+
+            def json(self):
+                return [fake_release]
+
+        class _FakeClient:
+            async def __aenter__(self):
+                return self
+
+            async def __aexit__(self, *_):
+                return None
+
+            async def get(self, *_, **__):
+                return _Resp()
+
+        with (
+            patch.object(_httpx, "AsyncClient", _FakeClient),
+            patch("backend.app.api.routes.updates._is_ha_addon", return_value=True),
+            patch("backend.app.api.routes.updates._is_docker_environment", return_value=True),
+        ):
+            response = await async_client.get("/api/v1/updates/check")
+        body = response.json()
+        assert body["is_ha_addon"] is True
+        assert body["update_method"] == "ha_addon"
+        # is_docker is preserved alongside so older frontend bundles still
+        # hit a managed-deployment branch (degrades to Docker UX) instead of
+        # rendering the in-app Install button.
+        assert body["is_docker"] is True
+
+    @pytest.mark.asyncio
+    async def test_check_docker_only_returns_docker_method(self, async_client: AsyncClient):
+        import httpx as _httpx
+
+        fake_release = {
+            "tag_name": "v999.9.9",
+            "name": "Far Future Release",
+            "body": "",
+            "html_url": "https://example.invalid/r",
+            "published_at": "2099-01-01T00:00:00Z",
+        }
+
+        class _Resp:
+            status_code = 200
+
+            def raise_for_status(self):
+                return None
+
+            def json(self):
+                return [fake_release]
+
+        class _FakeClient:
+            async def __aenter__(self):
+                return self
+
+            async def __aexit__(self, *_):
+                return None
+
+            async def get(self, *_, **__):
+                return _Resp()
+
+        with (
+            patch.object(_httpx, "AsyncClient", _FakeClient),
+            patch("backend.app.api.routes.updates._is_ha_addon", return_value=False),
+            patch("backend.app.api.routes.updates._is_docker_environment", return_value=True),
+        ):
+            response = await async_client.get("/api/v1/updates/check")
+        body = response.json()
+        assert body["is_ha_addon"] is False
+        assert body["is_docker"] is True
+        assert body["update_method"] == "docker"
+
     def test_parse_version(self):
         from backend.app.api.routes.updates import parse_version
 
@@ -261,6 +398,7 @@ class TestUpdatesAPI:
             return "v0.2.4b1"
 
         with (
+            patch.object(updates_module, "_is_ha_addon", return_value=False),
             patch.object(updates_module, "_is_docker_environment", return_value=False),
             patch.object(updates_module, "_perform_update", side_effect=fake_perform_update),
             patch.object(updates_module, "_discover_target_release", side_effect=fake_discover),
@@ -289,6 +427,7 @@ class TestUpdatesAPI:
         updates_module._update_status = {"status": "idle", "progress": 0, "message": "", "error": None}
 
         with (
+            patch.object(updates_module, "_is_ha_addon", return_value=False),
             patch.object(updates_module, "_is_docker_environment", return_value=False),
             patch.object(updates_module, "_discover_target_release", side_effect=fake_discover),
         ):
diff --git a/frontend/src/__tests__/components/Layout.test.tsx b/frontend/src/__tests__/components/Layout.test.tsx
index 4615fa490..0d8a1c6ff 100644
--- a/frontend/src/__tests__/components/Layout.test.tsx
+++ b/frontend/src/__tests__/components/Layout.test.tsx
@@ -255,4 +255,54 @@ describe('Layout', () => {
       });
     });
   });
+
+  describe('update banner suppression for HA addon', () => {
+    // HA Supervisor surfaces its own update notification natively in the HA
+    // UI, so the in-app banner would be duplicate noise that links to a page
+    // that just says "update via HA". Suppress it for HA addon deployments.
+    it('hides the update-available banner when running as an HA addon', async () => {
+      server.use(
+        http.get('/api/v1/updates/check', () => {
+          return HttpResponse.json({
+            update_available: true,
+            current_version: '0.2.4',
+            latest_version: '0.2.5',
+            is_docker: true,
+            is_ha_addon: true,
+            update_method: 'ha_addon',
+          });
+        }),
+      );
+
+      render(<Layout />);
+
+      await waitFor(() => {
+        const sidebar = document.querySelector('aside');
+        expect(sidebar).toBeInTheDocument();
+      });
+
+      expect(document.body.textContent).not.toContain('Update available');
+    });
+
+    it('still shows the update-available banner for plain Docker deployments', async () => {
+      server.use(
+        http.get('/api/v1/updates/check', () => {
+          return HttpResponse.json({
+            update_available: true,
+            current_version: '0.2.4',
+            latest_version: '0.2.5',
+            is_docker: true,
+            is_ha_addon: false,
+            update_method: 'docker',
+          });
+        }),
+      );
+
+      render(<Layout />);
+
+      await waitFor(() => {
+        expect(document.body.textContent).toContain('0.2.5');
+      });
+    });
+  });
 });
diff --git a/frontend/src/__tests__/pages/SettingsPage.test.tsx b/frontend/src/__tests__/pages/SettingsPage.test.tsx
index b1422c68b..2afc6ff7c 100644
--- a/frontend/src/__tests__/pages/SettingsPage.test.tsx
+++ b/frontend/src/__tests__/pages/SettingsPage.test.tsx
@@ -174,6 +174,73 @@ describe('SettingsPage', () => {
     });
   });
 
+  describe('update CTA per deployment shape', () => {
+    // The update card branches on the deployment shape returned by
+    // /updates/check. Each branch is mutually exclusive — verify the right
+    // one wins so HA addon users never see the docker-compose snippet
+    // (which they can't run from inside an HA addon container) and Docker
+    // users never see the in-app Install button (which would no-op).
+    const renderWithUpdateCheck = async (
+      checkBody: Record<string, unknown>,
+    ) => {
+      server.use(
+        http.get('/api/v1/settings/', () =>
+          HttpResponse.json({ ...mockSettings, check_updates: true }),
+        ),
+        http.get('/api/v1/updates/check', () => HttpResponse.json(checkBody)),
+      );
+      render(<SettingsPage />);
+      await waitFor(() => {
+        expect(screen.getByText('Updates')).toBeInTheDocument();
+      });
+    };
+
+    it('shows the HA Supervisor message when running as an HA addon', async () => {
+      await renderWithUpdateCheck({
+        update_available: true,
+        current_version: '0.2.4',
+        latest_version: '0.2.5',
+        release_name: '0.2.5',
+        release_notes: '',
+        release_url: 'https://example.invalid/r',
+        published_at: '2099-01-01T00:00:00Z',
+        is_docker: true,
+        is_ha_addon: true,
+        update_method: 'ha_addon',
+      });
+
+      await waitFor(() => {
+        expect(
+          screen.getByText(/Home Assistant Supervisor/i),
+        ).toBeInTheDocument();
+      });
+      // Docker hint must NOT render — HA branch wins.
+      expect(screen.queryByText('docker compose pull && docker compose up -d')).not.toBeInTheDocument();
+      expect(screen.queryByRole('button', { name: /install update/i })).not.toBeInTheDocument();
+    });
+
+    it('shows the docker-compose snippet for Docker (non-HA) deployments', async () => {
+      await renderWithUpdateCheck({
+        update_available: true,
+        current_version: '0.2.4',
+        latest_version: '0.2.5',
+        release_name: '0.2.5',
+        release_notes: '',
+        release_url: 'https://example.invalid/r',
+        published_at: '2099-01-01T00:00:00Z',
+        is_docker: true,
+        is_ha_addon: false,
+        update_method: 'docker',
+      });
+
+      await waitFor(() => {
+        expect(screen.getByText('docker compose pull && docker compose up -d')).toBeInTheDocument();
+      });
+      expect(screen.queryByText(/Home Assistant Supervisor/i)).not.toBeInTheDocument();
+      expect(screen.queryByRole('button', { name: /install update/i })).not.toBeInTheDocument();
+    });
+  });
+
   describe('tabs navigation', () => {
     it('can switch to Network tab', async () => {
       const user = userEvent.setup();
diff --git a/frontend/src/api/client.ts b/frontend/src/api/client.ts
index a605bde3d..1bd127ca2 100644
--- a/frontend/src/api/client.ts
+++ b/frontend/src/api/client.ts
@@ -2354,7 +2354,8 @@ export interface UpdateCheckResult {
   error?: string;
   message?: string;
   is_docker?: boolean;
-  update_method?: 'docker' | 'git';
+  is_ha_addon?: boolean;
+  update_method?: 'docker' | 'git' | 'ha_addon';
 }
 
 export interface UpdateStatus {
@@ -4417,7 +4418,7 @@ export const api = {
   getVersion: () => request<VersionInfo>('/updates/version'),
   checkForUpdates: () => request<UpdateCheckResult>('/updates/check'),
   applyUpdate: () =>
-    request<{ success: boolean; message: string; status?: UpdateStatus; is_docker?: boolean }>('/updates/apply', {
+    request<{ success: boolean; message: string; status?: UpdateStatus; is_docker?: boolean; is_ha_addon?: boolean }>('/updates/apply', {
       method: 'POST',
     }),
   getUpdateStatus: () => request<UpdateStatus>('/updates/status'),
diff --git a/frontend/src/components/Layout.tsx b/frontend/src/components/Layout.tsx
index 1172cd968..0086c26c7 100644
--- a/frontend/src/components/Layout.tsx
+++ b/frontend/src/components/Layout.tsx
@@ -377,10 +377,14 @@ export function Layout() {
     setDragOverId(null);
   };
 
-  // Show update banner if update available and not dismissed for this version
+  // Show update banner if update available and not dismissed for this version.
+  // Suppressed when running as a Home Assistant addon — HA Supervisor surfaces
+  // its own update notification in the HA UI, so the in-app banner is duplicate
+  // noise that links to a page that just says "update via HA."
   const showUpdateBanner = updateCheck?.update_available &&
     updateCheck.latest_version &&
-    updateCheck.latest_version !== dismissedUpdateVersion;
+    updateCheck.latest_version !== dismissedUpdateVersion &&
+    !updateCheck.is_ha_addon;
 
   const dismissUpdateBanner = () => {
     if (updateCheck?.latest_version) {
diff --git a/frontend/src/i18n/locales/de.ts b/frontend/src/i18n/locales/de.ts
index d65de0e5a..de33b5430 100644
--- a/frontend/src/i18n/locales/de.ts
+++ b/frontend/src/i18n/locales/de.ts
@@ -2068,6 +2068,7 @@ export default {
     updateAvailableVersion: 'Update verfügbar: v{{version}}',
     releaseNotes: 'Versionshinweise',
     updateViaDocker: 'Update über Docker Compose:',
+    updateViaHomeAssistant: 'Updates werden vom Home Assistant Supervisor verwaltet. Öffne Einstellungen → Add-ons → Bambuddy in Home Assistant, um die neue Version zu installieren.',
     installUpdate: 'Update installieren',
     latestVersionRunning: 'Sie verwenden die neueste Version',
     failedToCheckUpdates: 'Update-Prüfung fehlgeschlagen: {{error}}',
diff --git a/frontend/src/i18n/locales/en.ts b/frontend/src/i18n/locales/en.ts
index 68571dc6e..c5395e890 100644
--- a/frontend/src/i18n/locales/en.ts
+++ b/frontend/src/i18n/locales/en.ts
@@ -2071,6 +2071,7 @@ export default {
     updateAvailableVersion: 'Update available: v{{version}}',
     releaseNotes: 'Release Notes',
     updateViaDocker: 'Update via Docker Compose:',
+    updateViaHomeAssistant: 'Updates are managed by the Home Assistant Supervisor. Open Settings → Add-ons → Bambuddy in Home Assistant to install the new version.',
     installUpdate: 'Install Update',
     latestVersionRunning: "You're running the latest version",
     failedToCheckUpdates: 'Failed to check for updates: {{error}}',
diff --git a/frontend/src/i18n/locales/fr.ts b/frontend/src/i18n/locales/fr.ts
index 1a0b69d50..0aae0ecdb 100644
--- a/frontend/src/i18n/locales/fr.ts
+++ b/frontend/src/i18n/locales/fr.ts
@@ -2019,6 +2019,7 @@ export default {
     updateAvailableVersion: 'Mise à jour disponible : v{{version}}',
     releaseNotes: 'Notes de version',
     updateViaDocker: 'Mettre à jour via Docker Compose :',
+    updateViaHomeAssistant: 'Les mises à jour sont gérées par le superviseur Home Assistant. Ouvrez Paramètres → Modules complémentaires → Bambuddy dans Home Assistant pour installer la nouvelle version.',
     installUpdate: 'Installer la mise à jour',
     latestVersionRunning: 'Vous utilisez la dernière version',
     failedToCheckUpdates: 'Échec de la vérification des mises à jour : {{error}}',
diff --git a/frontend/src/i18n/locales/it.ts b/frontend/src/i18n/locales/it.ts
index 06b5fcd54..96f9e9f3f 100644
--- a/frontend/src/i18n/locales/it.ts
+++ b/frontend/src/i18n/locales/it.ts
@@ -2018,6 +2018,7 @@ export default {
     updateAvailableVersion: 'Aggiornamento disponibile: v{{version}}',
     releaseNotes: 'Note di rilascio',
     updateViaDocker: 'Aggiorna tramite Docker Compose:',
+    updateViaHomeAssistant: 'Gli aggiornamenti sono gestiti dal Supervisor di Home Assistant. Apri Impostazioni → Add-on → Bambuddy in Home Assistant per installare la nuova versione.',
     installUpdate: 'Installa aggiornamento',
     latestVersionRunning: 'Stai usando l\'ultima versione',
     failedToCheckUpdates: 'Controllo aggiornamenti fallito: {{error}}',
diff --git a/frontend/src/i18n/locales/ja.ts b/frontend/src/i18n/locales/ja.ts
index 76a0dd9ec..4099316ca 100644
--- a/frontend/src/i18n/locales/ja.ts
+++ b/frontend/src/i18n/locales/ja.ts
@@ -2067,6 +2067,7 @@ export default {
     updateAvailableVersion: 'アップデート利用可能: v{{version}}',
     releaseNotes: 'リリースノート',
     updateViaDocker: 'Docker Composeでアップデート:',
+    updateViaHomeAssistant: 'アップデートはHome Assistant Supervisorによって管理されます。Home Assistantの設定→アドオン→Bambuddyを開いて新しいバージョンをインストールしてください。',
     installUpdate: 'アップデートをインストール',
     latestVersionRunning: '最新バージョンを使用しています',
     failedToCheckUpdates: 'アップデートの確認に失敗しました: {{error}}',
diff --git a/frontend/src/i18n/locales/pt-BR.ts b/frontend/src/i18n/locales/pt-BR.ts
index 012eec9ae..2a0dc7bf9 100644
--- a/frontend/src/i18n/locales/pt-BR.ts
+++ b/frontend/src/i18n/locales/pt-BR.ts
@@ -2018,6 +2018,7 @@ export default {
     updateAvailableVersion: 'Atualização disponível: v{{version}}',
     releaseNotes: 'Notas da versão',
     updateViaDocker: 'Atualizar via Docker Compose:',
+    updateViaHomeAssistant: 'As atualizações são gerenciadas pelo Supervisor do Home Assistant. Abra Configurações → Complementos → Bambuddy no Home Assistant para instalar a nova versão.',
     installUpdate: 'Instalar atualização',
     latestVersionRunning: 'Você está usando a versão mais recente',
     failedToCheckUpdates: 'Falha ao verificar atualizações: {{error}}',
diff --git a/frontend/src/i18n/locales/zh-CN.ts b/frontend/src/i18n/locales/zh-CN.ts
index e06d80296..4d66ecaf0 100644
--- a/frontend/src/i18n/locales/zh-CN.ts
+++ b/frontend/src/i18n/locales/zh-CN.ts
@@ -2062,6 +2062,7 @@ export default {
     updateAvailableVersion: '可用更新：v{{version}}',
     releaseNotes: '发布说明',
     updateViaDocker: '通过 Docker Compose 更新：',
+    updateViaHomeAssistant: '更新由 Home Assistant Supervisor 管理。请在 Home Assistant 中打开 设置 → 加载项 → Bambuddy 以安装新版本。',
     installUpdate: '安装更新',
     latestVersionRunning: '您正在运行最新版本',
     failedToCheckUpdates: '检查更新失败：{{error}}',
diff --git a/frontend/src/i18n/locales/zh-TW.ts b/frontend/src/i18n/locales/zh-TW.ts
index 9ddbeb438..9e6e33cb6 100644
--- a/frontend/src/i18n/locales/zh-TW.ts
+++ b/frontend/src/i18n/locales/zh-TW.ts
@@ -2062,6 +2062,7 @@ export default {
     updateAvailableVersion: '可用更新：v{{version}}',
     releaseNotes: '發布說明',
     updateViaDocker: '透過 Docker Compose 更新：',
+    updateViaHomeAssistant: '更新由 Home Assistant Supervisor 管理。請在 Home Assistant 中開啟 設定 → 附加元件 → Bambuddy 以安裝新版本。',
     installUpdate: '安裝更新',
     latestVersionRunning: '您正在執行最新版本',
     failedToCheckUpdates: '檢查更新失敗：{{error}}',
diff --git a/frontend/src/pages/SettingsPage.tsx b/frontend/src/pages/SettingsPage.tsx
index 18e21f02d..023badd60 100644
--- a/frontend/src/pages/SettingsPage.tsx
+++ b/frontend/src/pages/SettingsPage.tsx
@@ -769,7 +769,7 @@ export function SettingsPage() {
   const applyUpdateMutation = useMutation({
     mutationFn: api.applyUpdate,
     onSuccess: (data) => {
-      if (data.is_docker) {
+      if (data.is_ha_addon || data.is_docker) {
         showToast(data.message, 'error');
       } else {
         refetchUpdateStatus();
@@ -2271,6 +2271,12 @@ export function SettingsPage() {
                       <div className="mt-3 p-2 bg-red-500/20 rounded text-sm text-red-400">
                         {updateStatus.error || updateStatus.message}
                       </div>
+                    ) : updateCheck?.is_ha_addon ? (
+                      <div className="mt-3 p-3 bg-bambu-dark-tertiary rounded-lg">
+                        <p className="text-sm text-bambu-gray">
+                          {t('settings.updateViaHomeAssistant')}
+                        </p>
+                      </div>
                     ) : updateCheck?.is_docker ? (
                       <div className="mt-3 p-3 bg-bambu-dark-tertiary rounded-lg">
                         <p className="text-sm text-bambu-gray mb-2">
diff --git a/static/assets/index-CTxVw43p.js b/static/assets/index-D4GSGeyj.js
similarity index 84%
rename from static/assets/index-CTxVw43p.js
rename to static/assets/index-D4GSGeyj.js
index cc09f4659..d6ae4399f 100644
--- a/static/assets/index-CTxVw43p.js
+++ b/static/assets/index-D4GSGeyj.js
@@ -5,34 +5,34 @@ function cue(t,e){for(var n=0;n<e.length;n++){const r=e[n];if(typeof r!="string"
 `);for(V=j=0;j<lt.length&&!lt[j].includes("DetermineComponentFrameRoot");)j++;for(;V<vt.length&&!vt[V].includes("DetermineComponentFrameRoot");)V++;if(j===lt.length||V===vt.length)for(j=lt.length-1,V=vt.length-1;1<=j&&0<=V&&lt[j]!==vt[V];)V--;for(;1<=j&&0<=V;j--,V--)if(lt[j]!==vt[V]){if(j!==1||V!==1)do if(j--,V--,0>V||lt[j]!==vt[V]){var Rt=`
 `+lt[j].replace(" at new "," at ");return h.displayName&&Rt.includes("<anonymous>")&&(Rt=Rt.replace("<anonymous>",h.displayName)),Rt}while(1<=j&&0<=V);break}}}finally{G=!1,Error.prepareStackTrace=_}return(_=h?h.displayName||h.name:"")?I(_):""}function W(h,y){switch(h.tag){case 26:case 27:case 5:return I(h.type);case 16:return I("Lazy");case 13:return h.child!==y&&y!==null?I("Suspense Fallback"):I("Suspense");case 19:return I("SuspenseList");case 0:case 15:return q(h.type,!1);case 11:return q(h.type.render,!1);case 1:return q(h.type,!0);case 31:return I("Activity");default:return""}}function te(h){try{var y="",_=null;do y+=W(h,_),_=h,h=h.return;while(h);return y}catch(j){return`
 Error generating stack: `+j.message+`
-`+j.stack}}var le=Object.prototype.hasOwnProperty,ye=t.unstable_scheduleCallback,he=t.unstable_cancelCallback,me=t.unstable_shouldYield,H=t.unstable_requestPaint,L=t.unstable_now,ee=t.unstable_getCurrentPriorityLevel,ge=t.unstable_ImmediatePriority,ke=t.unstable_UserBlockingPriority,je=t.unstable_NormalPriority,Te=t.unstable_LowPriority,xe=t.unstable_IdlePriority,Fe=t.log,Be=t.unstable_setDisableYieldValue,Ce=null,ze=null;function Me(h){if(typeof Fe=="function"&&Be(h),ze&&typeof ze.setStrictMode=="function")try{ze.setStrictMode(Ce,h)}catch{}}var Oe=Math.clz32?Math.clz32:ve,Ge=Math.log,et=Math.LN2;function ve(h){return h>>>=0,h===0?32:31-(Ge(h)/et|0)|0}var Xe=256,Pe=262144,Ve=4194304;function we(h){var y=h&42;if(y!==0)return y;switch(h&-h){case 1:return 1;case 2:return 2;case 4:return 4;case 8:return 8;case 16:return 16;case 32:return 32;case 64:return 64;case 128:return 128;case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:return h&261888;case 262144:case 524288:case 1048576:case 2097152:return h&3932160;case 4194304:case 8388608:case 16777216:case 33554432:return h&62914560;case 67108864:return 67108864;case 134217728:return 134217728;case 268435456:return 268435456;case 536870912:return 536870912;case 1073741824:return 0;default:return h}}function de(h,y,_){var j=h.pendingLanes;if(j===0)return 0;var V=0,Z=h.suspendedLanes,Ne=h.pingedLanes;h=h.warmLanes;var qe=j&134217727;return qe!==0?(j=qe&~Z,j!==0?V=we(j):(Ne&=qe,Ne!==0?V=we(Ne):_||(_=qe&~h,_!==0&&(V=we(_))))):(qe=j&~Z,qe!==0?V=we(qe):Ne!==0?V=we(Ne):_||(_=j&~h,_!==0&&(V=we(_)))),V===0?0:y!==0&&y!==V&&(y&Z)===0&&(Z=V&-V,_=y&-y,Z>=_||Z===32&&(_&4194048)!==0)?y:V}function Se(h,y){return(h.pendingLanes&~(h.suspendedLanes&~h.pingedLanes)&y)===0}function $e(h,y){switch(h){case 1:case 2:case 4:case 8:case 64:return y+250;case 16:case 32:case 128:case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:case 262144:case 524288:case 1048576:case 2097152:return y+5e3;case 4194304:case 8388608:case 16777216:case 33554432:return-1;case 67108864:case 134217728:case 268435456:case 536870912:case 1073741824:return-1;default:return-1}}function st(){var h=Ve;return Ve<<=1,(Ve&62914560)===0&&(Ve=4194304),h}function He(h){for(var y=[],_=0;31>_;_++)y.push(h);return y}function at(h,y){h.pendingLanes|=y,y!==268435456&&(h.suspendedLanes=0,h.pingedLanes=0,h.warmLanes=0)}function ht(h,y,_,j,V,Z){var Ne=h.pendingLanes;h.pendingLanes=_,h.suspendedLanes=0,h.pingedLanes=0,h.warmLanes=0,h.expiredLanes&=_,h.entangledLanes&=_,h.errorRecoveryDisabledLanes&=_,h.shellSuspendCounter=0;var qe=h.entanglements,lt=h.expirationTimes,vt=h.hiddenUpdates;for(_=Ne&~_;0<_;){var Rt=31-Oe(_),Ut=1<<Rt;qe[Rt]=0,lt[Rt]=-1;var kt=vt[Rt];if(kt!==null)for(vt[Rt]=null,Rt=0;Rt<kt.length;Rt++){var At=kt[Rt];At!==null&&(At.lane&=-536870913)}_&=~Ut}j!==0&&Mt(h,j,0),Z!==0&&V===0&&h.tag!==0&&(h.suspendedLanes|=Z&~(Ne&~y))}function Mt(h,y,_){h.pendingLanes|=y,h.suspendedLanes&=~y;var j=31-Oe(y);h.entangledLanes|=y,h.entanglements[j]=h.entanglements[j]|1073741824|_&261930}function qt(h,y){var _=h.entangledLanes|=y;for(h=h.entanglements;_;){var j=31-Oe(_),V=1<<j;V&y|h[j]&y&&(h[j]|=y),_&=~V}}function Vt(h,y){var _=y&-y;return _=(_&42)!==0?1:Gt(_),(_&(h.suspendedLanes|y))!==0?0:_}function Gt(h){switch(h){case 2:h=1;break;case 8:h=4;break;case 32:h=16;break;case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:case 262144:case 524288:case 1048576:case 2097152:case 4194304:case 8388608:case 16777216:case 33554432:h=128;break;case 268435456:h=134217728;break;default:h=0}return h}function Qt(h){return h&=-h,2<h?8<h?(h&134217727)!==0?32:268435456:8:2}function an(){var h=J.p;return h!==0?h:(h=window.event,h===void 0?32:H8(h.type))}function mn(h,y){var _=J.p;try{return J.p=h,y()}finally{J.p=_}}var dn=Math.random().toString(36).slice(2),jt="__reactFiber$"+dn,Jt="__reactProps$"+dn,zt="__reactContainer$"+dn,Tt="__reactEvents$"+dn,Ie="__reactListeners$"+dn,Re="__reactHandles$"+dn,Ye="__reactResources$"+dn,Ze="__reactMarker$"+dn;function Le(h){delete h[jt],delete h[Jt],delete h[Tt],delete h[Ie],delete h[Re]}function dt(h){var y=h[jt];if(y)return y;for(var _=h.parentNode;_;){if(y=_[zt]||_[jt]){if(_=y.alternate,y.child!==null||_!==null&&_.child!==null)for(h=C8(h);h!==null;){if(_=h[jt])return _;h=C8(h)}return y}h=_,_=h.parentNode}return null}function Ae(h){if(h=h[jt]||h[zt]){var y=h.tag;if(y===5||y===6||y===13||y===31||y===26||y===27||y===3)return h}return null}function We(h){var y=h.tag;if(y===5||y===26||y===27||y===6)return h.stateNode;throw Error(r(33))}function tt(h){var y=h[Ye];return y||(y=h[Ye]={hoistableStyles:new Map,hoistableScripts:new Map}),y}function nt(h){h[Ze]=!0}var Je=new Set,Ue={};function rt(h,y){Ct(h,y),Ct(h+"Capture",y)}function Ct(h,y){for(Ue[h]=y,h=0;h<y.length;h++)Je.add(y[h])}var bt=RegExp("^[:A-Z_a-z\\u00C0-\\u00D6\\u00D8-\\u00F6\\u00F8-\\u02FF\\u0370-\\u037D\\u037F-\\u1FFF\\u200C-\\u200D\\u2070-\\u218F\\u2C00-\\u2FEF\\u3001-\\uD7FF\\uF900-\\uFDCF\\uFDF0-\\uFFFD][:A-Z_a-z\\u00C0-\\u00D6\\u00D8-\\u00F6\\u00F8-\\u02FF\\u0370-\\u037D\\u037F-\\u1FFF\\u200C-\\u200D\\u2070-\\u218F\\u2C00-\\u2FEF\\u3001-\\uD7FF\\uF900-\\uFDCF\\uFDF0-\\uFFFD\\-.0-9\\u00B7\\u0300-\\u036F\\u203F-\\u2040]*$"),Ot={},Lt={};function Ft(h){return le.call(Lt,h)?!0:le.call(Ot,h)?!1:bt.test(h)?Lt[h]=!0:(Ot[h]=!0,!1)}function Ke(h,y,_){if(Ft(y))if(_===null)h.removeAttribute(y);else{switch(typeof _){case"undefined":case"function":case"symbol":h.removeAttribute(y);return;case"boolean":var j=y.toLowerCase().slice(0,5);if(j!=="data-"&&j!=="aria-"){h.removeAttribute(y);return}}h.setAttribute(y,""+_)}}function Ht(h,y,_){if(_===null)h.removeAttribute(y);else{switch(typeof _){case"undefined":case"function":case"symbol":case"boolean":h.removeAttribute(y);return}h.setAttribute(y,""+_)}}function Yt(h,y,_,j){if(j===null)h.removeAttribute(_);else{switch(typeof j){case"undefined":case"function":case"symbol":case"boolean":h.removeAttribute(_);return}h.setAttributeNS(y,_,""+j)}}function on(h){switch(typeof h){case"bigint":case"boolean":case"number":case"string":case"undefined":return h;case"object":return h;default:return""}}function wn(h){var y=h.type;return(h=h.nodeName)&&h.toLowerCase()==="input"&&(y==="checkbox"||y==="radio")}function gn(h,y,_){var j=Object.getOwnPropertyDescriptor(h.constructor.prototype,y);if(!h.hasOwnProperty(y)&&typeof j<"u"&&typeof j.get=="function"&&typeof j.set=="function"){var V=j.get,Z=j.set;return Object.defineProperty(h,y,{configurable:!0,get:function(){return V.call(this)},set:function(Ne){_=""+Ne,Z.call(this,Ne)}}),Object.defineProperty(h,y,{enumerable:j.enumerable}),{getValue:function(){return _},setValue:function(Ne){_=""+Ne},stopTracking:function(){h._valueTracker=null,delete h[y]}}}}function _n(h){if(!h._valueTracker){var y=wn(h)?"checked":"value";h._valueTracker=gn(h,y,""+h[y])}}function xn(h){if(!h)return!1;var y=h._valueTracker;if(!y)return!0;var _=y.getValue(),j="";return h&&(j=wn(h)?h.checked?"true":"false":h.value),h=j,h!==_?(y.setValue(h),!0):!1}function br(h){if(h=h||(typeof document<"u"?document:void 0),typeof h>"u")return null;try{return h.activeElement||h.body}catch{return h.body}}var Tr=/[\n"\\]/g;function On(h){return h.replace(Tr,function(y){return"\\"+y.charCodeAt(0).toString(16)+" "})}function Ra(h,y,_,j,V,Z,Ne,qe){h.name="",Ne!=null&&typeof Ne!="function"&&typeof Ne!="symbol"&&typeof Ne!="boolean"?h.type=Ne:h.removeAttribute("type"),y!=null?Ne==="number"?(y===0&&h.value===""||h.value!=y)&&(h.value=""+on(y)):h.value!==""+on(y)&&(h.value=""+on(y)):Ne!=="submit"&&Ne!=="reset"||h.removeAttribute("value"),y!=null?Br(h,Ne,on(y)):_!=null?Br(h,Ne,on(_)):j!=null&&h.removeAttribute("value"),V==null&&Z!=null&&(h.defaultChecked=!!Z),V!=null&&(h.checked=V&&typeof V!="function"&&typeof V!="symbol"),qe!=null&&typeof qe!="function"&&typeof qe!="symbol"&&typeof qe!="boolean"?h.name=""+on(qe):h.removeAttribute("name")}function $n(h,y,_,j,V,Z,Ne,qe){if(Z!=null&&typeof Z!="function"&&typeof Z!="symbol"&&typeof Z!="boolean"&&(h.type=Z),y!=null||_!=null){if(!(Z!=="submit"&&Z!=="reset"||y!=null)){_n(h);return}_=_!=null?""+on(_):"",y=y!=null?""+on(y):_,qe||y===h.value||(h.value=y),h.defaultValue=y}j=j??V,j=typeof j!="function"&&typeof j!="symbol"&&!!j,h.checked=qe?h.checked:!!j,h.defaultChecked=!!j,Ne!=null&&typeof Ne!="function"&&typeof Ne!="symbol"&&typeof Ne!="boolean"&&(h.name=Ne),_n(h)}function Br(h,y,_){y==="number"&&br(h.ownerDocument)===h||h.defaultValue===""+_||(h.defaultValue=""+_)}function Kr(h,y,_,j){if(h=h.options,y){y={};for(var V=0;V<_.length;V++)y["$"+_[V]]=!0;for(_=0;_<h.length;_++)V=y.hasOwnProperty("$"+h[_].value),h[_].selected!==V&&(h[_].selected=V),V&&j&&(h[_].defaultSelected=!0)}else{for(_=""+on(_),y=null,V=0;V<h.length;V++){if(h[V].value===_){h[V].selected=!0,j&&(h[V].defaultSelected=!0);return}y!==null||h[V].disabled||(y=h[V])}y!==null&&(y.selected=!0)}}function ur(h,y,_){if(y!=null&&(y=""+on(y),y!==h.value&&(h.value=y),_==null)){h.defaultValue!==y&&(h.defaultValue=y);return}h.defaultValue=_!=null?""+on(_):""}function Hr(h,y,_,j){if(y==null){if(j!=null){if(_!=null)throw Error(r(92));if(ne(j)){if(1<j.length)throw Error(r(93));j=j[0]}_=j}_==null&&(_=""),y=_}_=on(y),h.defaultValue=_,j=h.textContent,j===_&&j!==""&&j!==null&&(h.value=j),_n(h)}function or(h,y){if(y){var _=h.firstChild;if(_&&_===h.lastChild&&_.nodeType===3){_.nodeValue=y;return}}h.textContent=y}var ki=new Set("animationIterationCount aspectRatio borderImageOutset borderImageSlice borderImageWidth boxFlex boxFlexGroup boxOrdinalGroup columnCount columns flex flexGrow flexPositive flexShrink flexNegative flexOrder gridArea gridRow gridRowEnd gridRowSpan gridRowStart gridColumn gridColumnEnd gridColumnSpan gridColumnStart fontWeight lineClamp lineHeight opacity order orphans scale tabSize widows zIndex zoom fillOpacity floodOpacity stopOpacity strokeDasharray strokeDashoffset strokeMiterlimit strokeOpacity strokeWidth MozAnimationIterationCount MozBoxFlex MozBoxFlexGroup MozLineClamp msAnimationIterationCount msFlex msZoom msFlexGrow msFlexNegative msFlexOrder msFlexPositive msFlexShrink msGridColumn msGridColumnSpan msGridRow msGridRowSpan WebkitAnimationIterationCount WebkitBoxFlex WebKitBoxFlexGroup WebkitBoxOrdinalGroup WebkitColumnCount WebkitColumns WebkitFlex WebkitFlexGrow WebkitFlexPositive WebkitFlexShrink WebkitLineClamp".split(" "));function Oi(h,y,_){var j=y.indexOf("--")===0;_==null||typeof _=="boolean"||_===""?j?h.setProperty(y,""):y==="float"?h.cssFloat="":h[y]="":j?h.setProperty(y,_):typeof _!="number"||_===0||ki.has(y)?y==="float"?h.cssFloat=_:h[y]=(""+_).trim():h[y]=_+"px"}function yc(h,y,_){if(y!=null&&typeof y!="object")throw Error(r(62));if(h=h.style,_!=null){for(var j in _)!_.hasOwnProperty(j)||y!=null&&y.hasOwnProperty(j)||(j.indexOf("--")===0?h.setProperty(j,""):j==="float"?h.cssFloat="":h[j]="");for(var V in y)j=y[V],y.hasOwnProperty(V)&&_[V]!==j&&Oi(h,V,j)}else for(var Z in y)y.hasOwnProperty(Z)&&Oi(h,Z,y[Z])}function yl(h){if(h.indexOf("-")===-1)return!1;switch(h){case"annotation-xml":case"color-profile":case"font-face":case"font-face-src":case"font-face-uri":case"font-face-format":case"font-face-name":case"missing-glyph":return!1;default:return!0}}var Pt=new Map([["acceptCharset","accept-charset"],["htmlFor","for"],["httpEquiv","http-equiv"],["crossOrigin","crossorigin"],["accentHeight","accent-height"],["alignmentBaseline","alignment-baseline"],["arabicForm","arabic-form"],["baselineShift","baseline-shift"],["capHeight","cap-height"],["clipPath","clip-path"],["clipRule","clip-rule"],["colorInterpolation","color-interpolation"],["colorInterpolationFilters","color-interpolation-filters"],["colorProfile","color-profile"],["colorRendering","color-rendering"],["dominantBaseline","dominant-baseline"],["enableBackground","enable-background"],["fillOpacity","fill-opacity"],["fillRule","fill-rule"],["floodColor","flood-color"],["floodOpacity","flood-opacity"],["fontFamily","font-family"],["fontSize","font-size"],["fontSizeAdjust","font-size-adjust"],["fontStretch","font-stretch"],["fontStyle","font-style"],["fontVariant","font-variant"],["fontWeight","font-weight"],["glyphName","glyph-name"],["glyphOrientationHorizontal","glyph-orientation-horizontal"],["glyphOrientationVertical","glyph-orientation-vertical"],["horizAdvX","horiz-adv-x"],["horizOriginX","horiz-origin-x"],["imageRendering","image-rendering"],["letterSpacing","letter-spacing"],["lightingColor","lighting-color"],["markerEnd","marker-end"],["markerMid","marker-mid"],["markerStart","marker-start"],["overlinePosition","overline-position"],["overlineThickness","overline-thickness"],["paintOrder","paint-order"],["panose-1","panose-1"],["pointerEvents","pointer-events"],["renderingIntent","rendering-intent"],["shapeRendering","shape-rendering"],["stopColor","stop-color"],["stopOpacity","stop-opacity"],["strikethroughPosition","strikethrough-position"],["strikethroughThickness","strikethrough-thickness"],["strokeDasharray","stroke-dasharray"],["strokeDashoffset","stroke-dashoffset"],["strokeLinecap","stroke-linecap"],["strokeLinejoin","stroke-linejoin"],["strokeMiterlimit","stroke-miterlimit"],["strokeOpacity","stroke-opacity"],["strokeWidth","stroke-width"],["textAnchor","text-anchor"],["textDecoration","text-decoration"],["textRendering","text-rendering"],["transformOrigin","transform-origin"],["underlinePosition","underline-position"],["underlineThickness","underline-thickness"],["unicodeBidi","unicode-bidi"],["unicodeRange","unicode-range"],["unitsPerEm","units-per-em"],["vAlphabetic","v-alphabetic"],["vHanging","v-hanging"],["vIdeographic","v-ideographic"],["vMathematical","v-mathematical"],["vectorEffect","vector-effect"],["vertAdvY","vert-adv-y"],["vertOriginX","vert-origin-x"],["vertOriginY","vert-origin-y"],["wordSpacing","word-spacing"],["writingMode","writing-mode"],["xmlnsXlink","xmlns:xlink"],["xHeight","x-height"]]),Dn=/^[\u0000-\u001F ]*j[\r\n\t]*a[\r\n\t]*v[\r\n\t]*a[\r\n\t]*s[\r\n\t]*c[\r\n\t]*r[\r\n\t]*i[\r\n\t]*p[\r\n\t]*t[\r\n\t]*:/i;function mr(h){return Dn.test(""+h)?"javascript:throw new Error('React has blocked a javascript: URL as a security precaution.')":h}function Wt(){}var Ms=null;function vo(h){return h=h.target||h.srcElement||window,h.correspondingUseElement&&(h=h.correspondingUseElement),h.nodeType===3?h.parentNode:h}var td=null,vl=null;function Ir(h){var y=Ae(h);if(y&&(h=y.stateNode)){var _=h[Jt]||null;e:switch(h=y.stateNode,y.type){case"input":if(Ra(h,_.value,_.defaultValue,_.defaultValue,_.checked,_.defaultChecked,_.type,_.name),y=_.name,_.type==="radio"&&y!=null){for(_=h;_.parentNode;)_=_.parentNode;for(_=_.querySelectorAll('input[name="'+On(""+y)+'"][type="radio"]'),y=0;y<_.length;y++){var j=_[y];if(j!==h&&j.form===h.form){var V=j[Jt]||null;if(!V)throw Error(r(90));Ra(j,V.value,V.defaultValue,V.defaultValue,V.checked,V.defaultChecked,V.type,V.name)}}for(y=0;y<_.length;y++)j=_[y],j.form===h.form&&xn(j)}break e;case"textarea":ur(h,_.value,_.defaultValue);break e;case"select":y=_.value,y!=null&&Kr(h,!!_.multiple,y,!1)}}}var nd=!1;function $p(h,y,_){if(nd)return h(y,_);nd=!0;try{var j=h(y);return j}finally{if(nd=!1,(td!==null||vl!==null)&&(M_(),td&&(y=td,h=vl,vl=td=null,Ir(y),h)))for(y=0;y<h.length;y++)Ir(h[y])}}function ls(h,y){var _=h.stateNode;if(_===null)return null;var j=_[Jt]||null;if(j===null)return null;_=j[y];e:switch(y){case"onClick":case"onClickCapture":case"onDoubleClick":case"onDoubleClickCapture":case"onMouseDown":case"onMouseDownCapture":case"onMouseMove":case"onMouseMoveCapture":case"onMouseUp":case"onMouseUpCapture":case"onMouseEnter":(j=!j.disabled)||(h=h.type,j=!(h==="button"||h==="input"||h==="select"||h==="textarea")),h=!j;break e;default:h=!1}if(h)return null;if(_&&typeof _!="function")throw Error(r(231,y,typeof _));return _}var $o=!(typeof window>"u"||typeof window.document>"u"||typeof window.document.createElement>"u"),zi=!1;if($o)try{var wl={};Object.defineProperty(wl,"passive",{get:function(){zi=!0}}),window.addEventListener("test",wl,wl),window.removeEventListener("test",wl,wl)}catch{zi=!1}var wo=null,ha=null,vc=null;function Im(){if(vc)return vc;var h,y=ha,_=y.length,j,V="value"in wo?wo.value:wo.textContent,Z=V.length;for(h=0;h<_&&y[h]===V[h];h++);var Ne=_-h;for(j=1;j<=Ne&&y[_-j]===V[Z-j];j++);return vc=V.slice(h,1<j?1-j:void 0)}function ru(h){var y=h.keyCode;return"charCode"in h?(h=h.charCode,h===0&&y===13&&(h=13)):h=y,h===10&&(h=13),32<=h||h===13?h:0}function rd(){return!0}function Vp(){return!1}function ka(h){function y(_,j,V,Z,Ne){this._reactName=_,this._targetInst=V,this.type=j,this.nativeEvent=Z,this.target=Ne,this.currentTarget=null;for(var qe in h)h.hasOwnProperty(qe)&&(_=h[qe],this[qe]=_?_(Z):Z[qe]);return this.isDefaultPrevented=(Z.defaultPrevented!=null?Z.defaultPrevented:Z.returnValue===!1)?rd:Vp,this.isPropagationStopped=Vp,this}return m(y.prototype,{preventDefault:function(){this.defaultPrevented=!0;var _=this.nativeEvent;_&&(_.preventDefault?_.preventDefault():typeof _.returnValue!="unknown"&&(_.returnValue=!1),this.isDefaultPrevented=rd)},stopPropagation:function(){var _=this.nativeEvent;_&&(_.stopPropagation?_.stopPropagation():typeof _.cancelBubble!="unknown"&&(_.cancelBubble=!0),this.isPropagationStopped=rd)},persist:function(){},isPersistent:rd}),y}var Es={eventPhase:0,bubbles:0,cancelable:0,timeStamp:function(h){return h.timeStamp||Date.now()},defaultPrevented:0,isTrusted:0},Vo=ka(Es),wc=m({},Es,{view:0,detail:0}),Sl=ka(wc),ad,Gp,_l,id=m({},wc,{screenX:0,screenY:0,clientX:0,clientY:0,pageX:0,pageY:0,ctrlKey:0,shiftKey:0,altKey:0,metaKey:0,getModifierState:Bm,button:0,buttons:0,relatedTarget:function(h){return h.relatedTarget===void 0?h.fromElement===h.srcElement?h.toElement:h.fromElement:h.relatedTarget},movementX:function(h){return"movementX"in h?h.movementX:(h!==_l&&(_l&&h.type==="mousemove"?(ad=h.screenX-_l.screenX,Gp=h.screenY-_l.screenY):Gp=ad=0,_l=h),ad)},movementY:function(h){return"movementY"in h?h.movementY:Gp}}),Om=ka(id),sd=m({},id,{dataTransfer:0}),od=ka(sd),au=m({},wc,{relatedTarget:0}),ci=ka(au),iu=m({},Es,{animationName:0,elapsedTime:0,pseudoElement:0}),zm=ka(iu),Ys=m({},Es,{clipboardData:function(h){return"clipboardData"in h?h.clipboardData:window.clipboardData}}),su=ka(Ys),kl=m({},Es,{data:0}),Nl=ka(kl),ou={Esc:"Escape",Spacebar:" ",Left:"ArrowLeft",Up:"ArrowUp",Right:"ArrowRight",Down:"ArrowDown",Del:"Delete",Win:"OS",Menu:"ContextMenu",Apps:"ContextMenu",Scroll:"ScrollLock",MozPrintableKey:"Unidentified"},Um={8:"Backspace",9:"Tab",12:"Clear",13:"Enter",16:"Shift",17:"Control",18:"Alt",19:"Pause",20:"CapsLock",27:"Escape",32:" ",33:"PageUp",34:"PageDown",35:"End",36:"Home",37:"ArrowLeft",38:"ArrowUp",39:"ArrowRight",40:"ArrowDown",45:"Insert",46:"Delete",112:"F1",113:"F2",114:"F3",115:"F4",116:"F5",117:"F6",118:"F7",119:"F8",120:"F9",121:"F10",122:"F11",123:"F12",144:"NumLock",145:"ScrollLock",224:"Meta"},Zg={Alt:"altKey",Control:"ctrlKey",Meta:"metaKey",Shift:"shiftKey"};function hn(h){var y=this.nativeEvent;return y.getModifierState?y.getModifierState(h):(h=Zg[h])?!!y[h]:!1}function Bm(){return hn}var Hm=m({},wc,{key:function(h){if(h.key){var y=ou[h.key]||h.key;if(y!=="Unidentified")return y}return h.type==="keypress"?(h=ru(h),h===13?"Enter":String.fromCharCode(h)):h.type==="keydown"||h.type==="keyup"?Um[h.keyCode]||"Unidentified":""},code:0,location:0,ctrlKey:0,shiftKey:0,altKey:0,metaKey:0,repeat:0,locale:0,getModifierState:Bm,charCode:function(h){return h.type==="keypress"?ru(h):0},keyCode:function(h){return h.type==="keydown"||h.type==="keyup"?h.keyCode:0},which:function(h){return h.type==="keypress"?ru(h):h.type==="keydown"||h.type==="keyup"?h.keyCode:0}}),eb=ka(Hm),Wp=m({},id,{pointerId:0,width:0,height:0,pressure:0,tangentialPressure:0,tiltX:0,tiltY:0,twist:0,pointerType:0,isPrimary:0}),Go=ka(Wp),Wo=m({},wc,{touches:0,targetTouches:0,changedTouches:0,altKey:0,metaKey:0,ctrlKey:0,shiftKey:0,getModifierState:Bm}),Sc=ka(Wo),Xy=m({},Es,{propertyName:0,elapsedTime:0,pseudoElement:0}),qm=ka(Xy),Kp=m({},id,{deltaX:function(h){return"deltaX"in h?h.deltaX:"wheelDeltaX"in h?-h.wheelDeltaX:0},deltaY:function(h){return"deltaY"in h?h.deltaY:"wheelDeltaY"in h?-h.wheelDeltaY:"wheelDelta"in h?-h.wheelDelta:0},deltaZ:0,deltaMode:0}),$m=ka(Kp),_e=m({},Es,{newState:0,oldState:0}),Et=ka(_e),Fn=[9,13,27,32],kn=$o&&"CompositionEvent"in window,it=null;$o&&"documentMode"in document&&(it=document.documentMode);var Dt=$o&&"TextEvent"in window&&!it,Xt=$o&&(!kn||it&&8<it&&11>=it),ct=" ",Mn=!1;function xr(h,y){switch(h){case"keyup":return Fn.indexOf(y.keyCode)!==-1;case"keydown":return y.keyCode!==229;case"keypress":case"mousedown":case"focusout":return!0;default:return!1}}function lr(h){return h=h.detail,typeof h=="object"&&"data"in h?h.data:null}var Or=!1;function La(h,y){switch(h){case"compositionend":return lr(y);case"keypress":return y.which!==32?null:(Mn=!0,ct);case"textInput":return h=y.data,h===ct&&Mn?null:h;default:return null}}function un(h,y){if(Or)return h==="compositionend"||!kn&&xr(h,y)?(h=Im(),vc=ha=wo=null,Or=!1,h):null;switch(h){case"paste":return null;case"keypress":if(!(y.ctrlKey||y.altKey||y.metaKey)||y.ctrlKey&&y.altKey){if(y.char&&1<y.char.length)return y.char;if(y.which)return String.fromCharCode(y.which)}return null;case"compositionend":return Xt&&y.locale!=="ko"?null:y.data;default:return null}}var Rn={color:!0,date:!0,datetime:!0,"datetime-local":!0,email:!0,month:!0,number:!0,password:!0,range:!0,search:!0,tel:!0,text:!0,time:!0,url:!0,week:!0};function Na(h){var y=h&&h.nodeName&&h.nodeName.toLowerCase();return y==="input"?!!Rn[h.type]:y==="textarea"}function ni(h,y,_,j){td?vl?vl.push(j):vl=[j]:td=j,y=O_(y,"onChange"),0<y.length&&(_=new Vo("onChange","change",null,_,j),h.push({event:_,listeners:y}))}var di=null,Qs=null;function Cl(h){m8(h,0)}function ba(h){var y=We(h);if(xn(y))return h}function Ui(h,y){if(h==="change")return y}var Pl=!1;if($o){var Bi;if($o){var Js="oninput"in document;if(!Js){var _c=document.createElement("div");_c.setAttribute("oninput","return;"),Js=typeof _c.oninput=="function"}Bi=Js}else Bi=!1;Pl=Bi&&(!document.documentMode||9<document.documentMode)}function pa(){di&&(di.detachEvent("onpropertychange",So),Qs=di=null)}function So(h){if(h.propertyName==="value"&&ba(Qs)){var y=[];ni(y,Qs,h,vo(h)),$p(Cl,y)}}function Yy(h,y,_){h==="focusin"?(pa(),di=y,Qs=_,di.attachEvent("onpropertychange",So)):h==="focusout"&&pa()}function ri(h){if(h==="selectionchange"||h==="keyup"||h==="keydown")return ba(Qs)}function lu(h,y){if(h==="click")return ba(y)}function Xp(h,y){if(h==="input"||h==="change")return ba(y)}function Un(h,y){return h===y&&(h!==0||1/h===1/y)||h!==h&&y!==y}var _o=typeof Object.is=="function"?Object.is:Un;function Vm(h,y){if(_o(h,y))return!0;if(typeof h!="object"||h===null||typeof y!="object"||y===null)return!1;var _=Object.keys(h),j=Object.keys(y);if(_.length!==j.length)return!1;for(j=0;j<_.length;j++){var V=_[j];if(!le.call(y,V)||!_o(h[V],y[V]))return!1}return!0}function Yp(h){for(;h&&h.firstChild;)h=h.firstChild;return h}function Qy(h,y){var _=Yp(h);h=0;for(var j;_;){if(_.nodeType===3){if(j=h+_.textContent.length,h<=y&&j>=y)return{node:_,offset:y-h};h=j}e:{for(;_;){if(_.nextSibling){_=_.nextSibling;break e}_=_.parentNode}_=void 0}_=Yp(_)}}function Jy(h,y){return h&&y?h===y?!0:h&&h.nodeType===3?!1:y&&y.nodeType===3?Jy(h,y.parentNode):"contains"in h?h.contains(y):h.compareDocumentPosition?!!(h.compareDocumentPosition(y)&16):!1:!1}function YS(h){h=h!=null&&h.ownerDocument!=null&&h.ownerDocument.defaultView!=null?h.ownerDocument.defaultView:window;for(var y=br(h.document);y instanceof h.HTMLIFrameElement;){try{var _=typeof y.contentWindow.location.href=="string"}catch{_=!1}if(_)h=y.contentWindow;else break;y=br(h.document)}return y}function DA(h){var y=h&&h.nodeName&&h.nodeName.toLowerCase();return y&&(y==="input"&&(h.type==="text"||h.type==="search"||h.type==="tel"||h.type==="url"||h.type==="password")||y==="textarea"||h.contentEditable==="true")}var Hce=$o&&"documentMode"in document&&11>=document.documentMode,tb=null,FA=null,Zy=null,RA=!1;function U5(h,y,_){var j=_.window===_?_.document:_.nodeType===9?_:_.ownerDocument;RA||tb==null||tb!==br(j)||(j=tb,"selectionStart"in j&&DA(j)?j={start:j.selectionStart,end:j.selectionEnd}:(j=(j.ownerDocument&&j.ownerDocument.defaultView||window).getSelection(),j={anchorNode:j.anchorNode,anchorOffset:j.anchorOffset,focusNode:j.focusNode,focusOffset:j.focusOffset}),Zy&&Vm(Zy,j)||(Zy=j,j=O_(FA,"onSelect"),0<j.length&&(y=new Vo("onSelect","select",null,y,_),h.push({event:y,listeners:j}),y.target=tb)))}function Qp(h,y){var _={};return _[h.toLowerCase()]=y.toLowerCase(),_["Webkit"+h]="webkit"+y,_["Moz"+h]="moz"+y,_}var nb={animationend:Qp("Animation","AnimationEnd"),animationiteration:Qp("Animation","AnimationIteration"),animationstart:Qp("Animation","AnimationStart"),transitionrun:Qp("Transition","TransitionRun"),transitionstart:Qp("Transition","TransitionStart"),transitioncancel:Qp("Transition","TransitionCancel"),transitionend:Qp("Transition","TransitionEnd")},LA={},B5={};$o&&(B5=document.createElement("div").style,"AnimationEvent"in window||(delete nb.animationend.animation,delete nb.animationiteration.animation,delete nb.animationstart.animation),"TransitionEvent"in window||delete nb.transitionend.transition);function Jp(h){if(LA[h])return LA[h];if(!nb[h])return h;var y=nb[h],_;for(_ in y)if(y.hasOwnProperty(_)&&_ in B5)return LA[h]=y[_];return h}var H5=Jp("animationend"),q5=Jp("animationiteration"),$5=Jp("animationstart"),qce=Jp("transitionrun"),$ce=Jp("transitionstart"),Vce=Jp("transitioncancel"),V5=Jp("transitionend"),G5=new Map,IA="abort auxClick beforeToggle cancel canPlay canPlayThrough click close contextMenu copy cut drag dragEnd dragEnter dragExit dragLeave dragOver dragStart drop durationChange emptied encrypted ended error gotPointerCapture input invalid keyDown keyPress keyUp load loadedData loadedMetadata loadStart lostPointerCapture mouseDown mouseMove mouseOut mouseOver mouseUp paste pause play playing pointerCancel pointerDown pointerMove pointerOut pointerOver pointerUp progress rateChange reset resize seeked seeking stalled submit suspend timeUpdate touchCancel touchEnd touchStart volumeChange scroll toggle touchMove waiting wheel".split(" ");IA.push("scrollEnd");function kc(h,y){G5.set(h,y),rt(y,[h])}var QS=typeof reportError=="function"?reportError:function(h){if(typeof window=="object"&&typeof window.ErrorEvent=="function"){var y=new window.ErrorEvent("error",{bubbles:!0,cancelable:!0,message:typeof h=="object"&&h!==null&&typeof h.message=="string"?String(h.message):String(h),error:h});if(!window.dispatchEvent(y))return}else if(typeof process=="object"&&typeof process.emit=="function"){process.emit("uncaughtException",h);return}console.error(h)},Tl=[],rb=0,OA=0;function JS(){for(var h=rb,y=OA=rb=0;y<h;){var _=Tl[y];Tl[y++]=null;var j=Tl[y];Tl[y++]=null;var V=Tl[y];Tl[y++]=null;var Z=Tl[y];if(Tl[y++]=null,j!==null&&V!==null){var Ne=j.pending;Ne===null?V.next=V:(V.next=Ne.next,Ne.next=V),j.pending=V}Z!==0&&W5(_,V,Z)}}function ZS(h,y,_,j){Tl[rb++]=h,Tl[rb++]=y,Tl[rb++]=_,Tl[rb++]=j,OA|=j,h.lanes|=j,h=h.alternate,h!==null&&(h.lanes|=j)}function zA(h,y,_,j){return ZS(h,y,_,j),e_(h)}function Zp(h,y){return ZS(h,null,null,y),e_(h)}function W5(h,y,_){h.lanes|=_;var j=h.alternate;j!==null&&(j.lanes|=_);for(var V=!1,Z=h.return;Z!==null;)Z.childLanes|=_,j=Z.alternate,j!==null&&(j.childLanes|=_),Z.tag===22&&(h=Z.stateNode,h===null||h._visibility&1||(V=!0)),h=Z,Z=Z.return;return h.tag===3?(Z=h.stateNode,V&&y!==null&&(V=31-Oe(_),h=Z.hiddenUpdates,j=h[V],j===null?h[V]=[y]:j.push(y),y.lane=_|536870912),Z):null}function e_(h){if(50<wv)throw wv=0,Kj=null,Error(r(185));for(var y=h.return;y!==null;)h=y,y=h.return;return h.tag===3?h.stateNode:null}var ab={};function Gce(h,y,_,j){this.tag=h,this.key=_,this.sibling=this.child=this.return=this.stateNode=this.type=this.elementType=null,this.index=0,this.refCleanup=this.ref=null,this.pendingProps=y,this.dependencies=this.memoizedState=this.updateQueue=this.memoizedProps=null,this.mode=j,this.subtreeFlags=this.flags=0,this.deletions=null,this.childLanes=this.lanes=0,this.alternate=null}function Ko(h,y,_,j){return new Gce(h,y,_,j)}function UA(h){return h=h.prototype,!(!h||!h.isReactComponent)}function cu(h,y){var _=h.alternate;return _===null?(_=Ko(h.tag,y,h.key,h.mode),_.elementType=h.elementType,_.type=h.type,_.stateNode=h.stateNode,_.alternate=h,h.alternate=_):(_.pendingProps=y,_.type=h.type,_.flags=0,_.subtreeFlags=0,_.deletions=null),_.flags=h.flags&65011712,_.childLanes=h.childLanes,_.lanes=h.lanes,_.child=h.child,_.memoizedProps=h.memoizedProps,_.memoizedState=h.memoizedState,_.updateQueue=h.updateQueue,y=h.dependencies,_.dependencies=y===null?null:{lanes:y.lanes,firstContext:y.firstContext},_.sibling=h.sibling,_.index=h.index,_.ref=h.ref,_.refCleanup=h.refCleanup,_}function K5(h,y){h.flags&=65011714;var _=h.alternate;return _===null?(h.childLanes=0,h.lanes=y,h.child=null,h.subtreeFlags=0,h.memoizedProps=null,h.memoizedState=null,h.updateQueue=null,h.dependencies=null,h.stateNode=null):(h.childLanes=_.childLanes,h.lanes=_.lanes,h.child=_.child,h.subtreeFlags=0,h.deletions=null,h.memoizedProps=_.memoizedProps,h.memoizedState=_.memoizedState,h.updateQueue=_.updateQueue,h.type=_.type,y=_.dependencies,h.dependencies=y===null?null:{lanes:y.lanes,firstContext:y.firstContext}),h}function t_(h,y,_,j,V,Z){var Ne=0;if(j=h,typeof h=="function")UA(h)&&(Ne=1);else if(typeof h=="string")Ne=Qde(h,_,be.current)?26:h==="html"||h==="head"||h==="body"?27:5;else e:switch(h){case k:return h=Ko(31,_,y,V),h.elementType=k,h.lanes=Z,h;case v:return ef(_.children,V,Z,y);case b:Ne=8,V|=24;break;case g:return h=Ko(12,_,y,V|2),h.elementType=g,h.lanes=Z,h;case C:return h=Ko(13,_,y,V),h.elementType=C,h.lanes=Z,h;case A:return h=Ko(19,_,y,V),h.elementType=A,h.lanes=Z,h;default:if(typeof h=="object"&&h!==null)switch(h.$$typeof){case N:Ne=10;break e;case S:Ne=9;break e;case P:Ne=11;break e;case T:Ne=14;break e;case F:Ne=16,j=null;break e}Ne=29,_=Error(r(130,h===null?"null":typeof h,"")),j=null}return y=Ko(Ne,_,y,V),y.elementType=h,y.type=j,y.lanes=Z,y}function ef(h,y,_,j){return h=Ko(7,h,j,y),h.lanes=_,h}function BA(h,y,_){return h=Ko(6,h,null,y),h.lanes=_,h}function X5(h){var y=Ko(18,null,null,0);return y.stateNode=h,y}function HA(h,y,_){return y=Ko(4,h.children!==null?h.children:[],h.key,y),y.lanes=_,y.stateNode={containerInfo:h.containerInfo,pendingChildren:null,implementation:h.implementation},y}var Y5=new WeakMap;function Al(h,y){if(typeof h=="object"&&h!==null){var _=Y5.get(h);return _!==void 0?_:(y={value:h,source:y,stack:te(y)},Y5.set(h,y),y)}return{value:h,source:y,stack:te(y)}}var ib=[],sb=0,n_=null,ev=0,jl=[],Ml=0,Gm=null,ld=1,cd="";function du(h,y){ib[sb++]=ev,ib[sb++]=n_,n_=h,ev=y}function Q5(h,y,_){jl[Ml++]=ld,jl[Ml++]=cd,jl[Ml++]=Gm,Gm=h;var j=ld;h=cd;var V=32-Oe(j)-1;j&=~(1<<V),_+=1;var Z=32-Oe(y)+V;if(30<Z){var Ne=V-V%5;Z=(j&(1<<Ne)-1).toString(32),j>>=Ne,V-=Ne,ld=1<<32-Oe(y)+V|_<<V|j,cd=Z+h}else ld=1<<Z|_<<V|j,cd=h}function qA(h){h.return!==null&&(du(h,1),Q5(h,1,0))}function $A(h){for(;h===n_;)n_=ib[--sb],ib[sb]=null,ev=ib[--sb],ib[sb]=null;for(;h===Gm;)Gm=jl[--Ml],jl[Ml]=null,cd=jl[--Ml],jl[Ml]=null,ld=jl[--Ml],jl[Ml]=null}function J5(h,y){jl[Ml++]=ld,jl[Ml++]=cd,jl[Ml++]=Gm,ld=y.id,cd=y.overflow,Gm=h}var cs=null,xa=null,Sr=!1,Wm=null,El=!1,VA=Error(r(519));function Km(h){var y=Error(r(418,1<arguments.length&&arguments[1]!==void 0&&arguments[1]?"text":"HTML",""));throw tv(Al(y,h)),VA}function Z5(h){var y=h.stateNode,_=h.type,j=h.memoizedProps;switch(y[jt]=h,y[Jt]=j,_){case"dialog":pr("cancel",y),pr("close",y);break;case"iframe":case"object":case"embed":pr("load",y);break;case"video":case"audio":for(_=0;_<_v.length;_++)pr(_v[_],y);break;case"source":pr("error",y);break;case"img":case"image":case"link":pr("error",y),pr("load",y);break;case"details":pr("toggle",y);break;case"input":pr("invalid",y),$n(y,j.value,j.defaultValue,j.checked,j.defaultChecked,j.type,j.name,!0);break;case"select":pr("invalid",y);break;case"textarea":pr("invalid",y),Hr(y,j.value,j.defaultValue,j.children)}_=j.children,typeof _!="string"&&typeof _!="number"&&typeof _!="bigint"||y.textContent===""+_||j.suppressHydrationWarning===!0||g8(y.textContent,_)?(j.popover!=null&&(pr("beforetoggle",y),pr("toggle",y)),j.onScroll!=null&&pr("scroll",y),j.onScrollEnd!=null&&pr("scrollend",y),j.onClick!=null&&(y.onclick=Wt),y=!0):y=!1,y||Km(h,!0)}function eU(h){for(cs=h.return;cs;)switch(cs.tag){case 5:case 31:case 13:El=!1;return;case 27:case 3:El=!0;return;default:cs=cs.return}}function ob(h){if(h!==cs)return!1;if(!Sr)return eU(h),Sr=!0,!1;var y=h.tag,_;if((_=y!==3&&y!==27)&&((_=y===5)&&(_=h.type,_=!(_!=="form"&&_!=="button")||cM(h.type,h.memoizedProps)),_=!_),_&&xa&&Km(h),eU(h),y===13){if(h=h.memoizedState,h=h!==null?h.dehydrated:null,!h)throw Error(r(317));xa=N8(h)}else if(y===31){if(h=h.memoizedState,h=h!==null?h.dehydrated:null,!h)throw Error(r(317));xa=N8(h)}else y===27?(y=xa,lh(h.type)?(h=pM,pM=null,xa=h):xa=y):xa=cs?Fl(h.stateNode.nextSibling):null;return!0}function tf(){xa=cs=null,Sr=!1}function GA(){var h=Wm;return h!==null&&(Po===null?Po=h:Po.push.apply(Po,h),Wm=null),h}function tv(h){Wm===null?Wm=[h]:Wm.push(h)}var WA=K(null),nf=null,uu=null;function Xm(h,y,_){pe(WA,y._currentValue),y._currentValue=_}function mu(h){h._currentValue=WA.current,ae(WA)}function KA(h,y,_){for(;h!==null;){var j=h.alternate;if((h.childLanes&y)!==y?(h.childLanes|=y,j!==null&&(j.childLanes|=y)):j!==null&&(j.childLanes&y)!==y&&(j.childLanes|=y),h===_)break;h=h.return}}function XA(h,y,_,j){var V=h.child;for(V!==null&&(V.return=h);V!==null;){var Z=V.dependencies;if(Z!==null){var Ne=V.child;Z=Z.firstContext;e:for(;Z!==null;){var qe=Z;Z=V;for(var lt=0;lt<y.length;lt++)if(qe.context===y[lt]){Z.lanes|=_,qe=Z.alternate,qe!==null&&(qe.lanes|=_),KA(Z.return,_,h),j||(Ne=null);break e}Z=qe.next}}else if(V.tag===18){if(Ne=V.return,Ne===null)throw Error(r(341));Ne.lanes|=_,Z=Ne.alternate,Z!==null&&(Z.lanes|=_),KA(Ne,_,h),Ne=null}else Ne=V.child;if(Ne!==null)Ne.return=V;else for(Ne=V;Ne!==null;){if(Ne===h){Ne=null;break}if(V=Ne.sibling,V!==null){V.return=Ne.return,Ne=V;break}Ne=Ne.return}V=Ne}}function lb(h,y,_,j){h=null;for(var V=y,Z=!1;V!==null;){if(!Z){if((V.flags&524288)!==0)Z=!0;else if((V.flags&262144)!==0)break}if(V.tag===10){var Ne=V.alternate;if(Ne===null)throw Error(r(387));if(Ne=Ne.memoizedProps,Ne!==null){var qe=V.type;_o(V.pendingProps.value,Ne.value)||(h!==null?h.push(qe):h=[qe])}}else if(V===Y.current){if(Ne=V.alternate,Ne===null)throw Error(r(387));Ne.memoizedState.memoizedState!==V.memoizedState.memoizedState&&(h!==null?h.push(Tv):h=[Tv])}V=V.return}h!==null&&XA(y,h,_,j),y.flags|=262144}function r_(h){for(h=h.firstContext;h!==null;){if(!_o(h.context._currentValue,h.memoizedValue))return!0;h=h.next}return!1}function rf(h){nf=h,uu=null,h=h.dependencies,h!==null&&(h.firstContext=null)}function ds(h){return tU(nf,h)}function a_(h,y){return nf===null&&rf(h),tU(h,y)}function tU(h,y){var _=y._currentValue;if(y={context:y,memoizedValue:_,next:null},uu===null){if(h===null)throw Error(r(308));uu=y,h.dependencies={lanes:0,firstContext:y},h.flags|=524288}else uu=uu.next=y;return _}var Wce=typeof AbortController<"u"?AbortController:function(){var h=[],y=this.signal={aborted:!1,addEventListener:function(_,j){h.push(j)}};this.abort=function(){y.aborted=!0,h.forEach(function(_){return _()})}},Kce=t.unstable_scheduleCallback,Xce=t.unstable_NormalPriority,ui={$$typeof:N,Consumer:null,Provider:null,_currentValue:null,_currentValue2:null,_threadCount:0};function YA(){return{controller:new Wce,data:new Map,refCount:0}}function nv(h){h.refCount--,h.refCount===0&&Kce(Xce,function(){h.controller.abort()})}var rv=null,QA=0,cb=0,db=null;function Yce(h,y){if(rv===null){var _=rv=[];QA=0,cb=eM(),db={status:"pending",value:void 0,then:function(j){_.push(j)}}}return QA++,y.then(nU,nU),y}function nU(){if(--QA===0&&rv!==null){db!==null&&(db.status="fulfilled");var h=rv;rv=null,cb=0,db=null;for(var y=0;y<h.length;y++)(0,h[y])()}}function Qce(h,y){var _=[],j={status:"pending",value:null,reason:null,then:function(V){_.push(V)}};return h.then(function(){j.status="fulfilled",j.value=y;for(var V=0;V<_.length;V++)(0,_[V])(y)},function(V){for(j.status="rejected",j.reason=V,V=0;V<_.length;V++)(0,_[V])(void 0)}),j}var rU=re.S;re.S=function(h,y){UB=L(),typeof y=="object"&&y!==null&&typeof y.then=="function"&&Yce(h,y),rU!==null&&rU(h,y)};var af=K(null);function JA(){var h=af.current;return h!==null?h:oa.pooledCache}function i_(h,y){y===null?pe(af,af.current):pe(af,y.pool)}function aU(){var h=JA();return h===null?null:{parent:ui._currentValue,pool:h}}var ub=Error(r(460)),ZA=Error(r(474)),s_=Error(r(542)),o_={then:function(){}};function iU(h){return h=h.status,h==="fulfilled"||h==="rejected"}function sU(h,y,_){switch(_=h[_],_===void 0?h.push(y):_!==y&&(y.then(Wt,Wt),y=_),y.status){case"fulfilled":return y.value;case"rejected":throw h=y.reason,lU(h),h;default:if(typeof y.status=="string")y.then(Wt,Wt);else{if(h=oa,h!==null&&100<h.shellSuspendCounter)throw Error(r(482));h=y,h.status="pending",h.then(function(j){if(y.status==="pending"){var V=y;V.status="fulfilled",V.value=j}},function(j){if(y.status==="pending"){var V=y;V.status="rejected",V.reason=j}})}switch(y.status){case"fulfilled":return y.value;case"rejected":throw h=y.reason,lU(h),h}throw of=y,ub}}function sf(h){try{var y=h._init;return y(h._payload)}catch(_){throw _!==null&&typeof _=="object"&&typeof _.then=="function"?(of=_,ub):_}}var of=null;function oU(){if(of===null)throw Error(r(459));var h=of;return of=null,h}function lU(h){if(h===ub||h===s_)throw Error(r(483))}var mb=null,av=0;function l_(h){var y=av;return av+=1,mb===null&&(mb=[]),sU(mb,h,y)}function iv(h,y){y=y.props.ref,h.ref=y!==void 0?y:null}function c_(h,y){throw y.$$typeof===p?Error(r(525)):(h=Object.prototype.toString.call(y),Error(r(31,h==="[object Object]"?"object with keys {"+Object.keys(y).join(", ")+"}":h)))}function cU(h){function y(gt,pt){if(h){var yt=gt.deletions;yt===null?(gt.deletions=[pt],gt.flags|=16):yt.push(pt)}}function _(gt,pt){if(!h)return null;for(;pt!==null;)y(gt,pt),pt=pt.sibling;return null}function j(gt){for(var pt=new Map;gt!==null;)gt.key!==null?pt.set(gt.key,gt):pt.set(gt.index,gt),gt=gt.sibling;return pt}function V(gt,pt){return gt=cu(gt,pt),gt.index=0,gt.sibling=null,gt}function Z(gt,pt,yt){return gt.index=yt,h?(yt=gt.alternate,yt!==null?(yt=yt.index,yt<pt?(gt.flags|=67108866,pt):yt):(gt.flags|=67108866,pt)):(gt.flags|=1048576,pt)}function Ne(gt){return h&&gt.alternate===null&&(gt.flags|=67108866),gt}function qe(gt,pt,yt,It){return pt===null||pt.tag!==6?(pt=BA(yt,gt.mode,It),pt.return=gt,pt):(pt=V(pt,yt),pt.return=gt,pt)}function lt(gt,pt,yt,It){var An=yt.type;return An===v?Rt(gt,pt,yt.props.children,It,yt.key):pt!==null&&(pt.elementType===An||typeof An=="object"&&An!==null&&An.$$typeof===F&&sf(An)===pt.type)?(pt=V(pt,yt.props),iv(pt,yt),pt.return=gt,pt):(pt=t_(yt.type,yt.key,yt.props,null,gt.mode,It),iv(pt,yt),pt.return=gt,pt)}function vt(gt,pt,yt,It){return pt===null||pt.tag!==4||pt.stateNode.containerInfo!==yt.containerInfo||pt.stateNode.implementation!==yt.implementation?(pt=HA(yt,gt.mode,It),pt.return=gt,pt):(pt=V(pt,yt.children||[]),pt.return=gt,pt)}function Rt(gt,pt,yt,It,An){return pt===null||pt.tag!==7?(pt=ef(yt,gt.mode,It,An),pt.return=gt,pt):(pt=V(pt,yt),pt.return=gt,pt)}function Ut(gt,pt,yt){if(typeof pt=="string"&&pt!==""||typeof pt=="number"||typeof pt=="bigint")return pt=BA(""+pt,gt.mode,yt),pt.return=gt,pt;if(typeof pt=="object"&&pt!==null){switch(pt.$$typeof){case f:return yt=t_(pt.type,pt.key,pt.props,null,gt.mode,yt),iv(yt,pt),yt.return=gt,yt;case x:return pt=HA(pt,gt.mode,yt),pt.return=gt,pt;case F:return pt=sf(pt),Ut(gt,pt,yt)}if(ne(pt)||z(pt))return pt=ef(pt,gt.mode,yt,null),pt.return=gt,pt;if(typeof pt.then=="function")return Ut(gt,l_(pt),yt);if(pt.$$typeof===N)return Ut(gt,a_(gt,pt),yt);c_(gt,pt)}return null}function kt(gt,pt,yt,It){var An=pt!==null?pt.key:null;if(typeof yt=="string"&&yt!==""||typeof yt=="number"||typeof yt=="bigint")return An!==null?null:qe(gt,pt,""+yt,It);if(typeof yt=="object"&&yt!==null){switch(yt.$$typeof){case f:return yt.key===An?lt(gt,pt,yt,It):null;case x:return yt.key===An?vt(gt,pt,yt,It):null;case F:return yt=sf(yt),kt(gt,pt,yt,It)}if(ne(yt)||z(yt))return An!==null?null:Rt(gt,pt,yt,It,null);if(typeof yt.then=="function")return kt(gt,pt,l_(yt),It);if(yt.$$typeof===N)return kt(gt,pt,a_(gt,yt),It);c_(gt,yt)}return null}function At(gt,pt,yt,It,An){if(typeof It=="string"&&It!==""||typeof It=="number"||typeof It=="bigint")return gt=gt.get(yt)||null,qe(pt,gt,""+It,An);if(typeof It=="object"&&It!==null){switch(It.$$typeof){case f:return gt=gt.get(It.key===null?yt:It.key)||null,lt(pt,gt,It,An);case x:return gt=gt.get(It.key===null?yt:It.key)||null,vt(pt,gt,It,An);case F:return It=sf(It),At(gt,pt,yt,It,An)}if(ne(It)||z(It))return gt=gt.get(yt)||null,Rt(pt,gt,It,An,null);if(typeof It.then=="function")return At(gt,pt,yt,l_(It),An);if(It.$$typeof===N)return At(gt,pt,yt,a_(pt,It),An);c_(pt,It)}return null}function bn(gt,pt,yt,It){for(var An=null,Er=null,vn=pt,Qn=pt=0,vr=null;vn!==null&&Qn<yt.length;Qn++){vn.index>Qn?(vr=vn,vn=null):vr=vn.sibling;var Dr=kt(gt,vn,yt[Qn],It);if(Dr===null){vn===null&&(vn=vr);break}h&&vn&&Dr.alternate===null&&y(gt,vn),pt=Z(Dr,pt,Qn),Er===null?An=Dr:Er.sibling=Dr,Er=Dr,vn=vr}if(Qn===yt.length)return _(gt,vn),Sr&&du(gt,Qn),An;if(vn===null){for(;Qn<yt.length;Qn++)vn=Ut(gt,yt[Qn],It),vn!==null&&(pt=Z(vn,pt,Qn),Er===null?An=vn:Er.sibling=vn,Er=vn);return Sr&&du(gt,Qn),An}for(vn=j(vn);Qn<yt.length;Qn++)vr=At(vn,gt,Qn,yt[Qn],It),vr!==null&&(h&&vr.alternate!==null&&vn.delete(vr.key===null?Qn:vr.key),pt=Z(vr,pt,Qn),Er===null?An=vr:Er.sibling=vr,Er=vr);return h&&vn.forEach(function(hh){return y(gt,hh)}),Sr&&du(gt,Qn),An}function In(gt,pt,yt,It){if(yt==null)throw Error(r(151));for(var An=null,Er=null,vn=pt,Qn=pt=0,vr=null,Dr=yt.next();vn!==null&&!Dr.done;Qn++,Dr=yt.next()){vn.index>Qn?(vr=vn,vn=null):vr=vn.sibling;var hh=kt(gt,vn,Dr.value,It);if(hh===null){vn===null&&(vn=vr);break}h&&vn&&hh.alternate===null&&y(gt,vn),pt=Z(hh,pt,Qn),Er===null?An=hh:Er.sibling=hh,Er=hh,vn=vr}if(Dr.done)return _(gt,vn),Sr&&du(gt,Qn),An;if(vn===null){for(;!Dr.done;Qn++,Dr=yt.next())Dr=Ut(gt,Dr.value,It),Dr!==null&&(pt=Z(Dr,pt,Qn),Er===null?An=Dr:Er.sibling=Dr,Er=Dr);return Sr&&du(gt,Qn),An}for(vn=j(vn);!Dr.done;Qn++,Dr=yt.next())Dr=At(vn,gt,Qn,Dr.value,It),Dr!==null&&(h&&Dr.alternate!==null&&vn.delete(Dr.key===null?Qn:Dr.key),pt=Z(Dr,pt,Qn),Er===null?An=Dr:Er.sibling=Dr,Er=Dr);return h&&vn.forEach(function(lue){return y(gt,lue)}),Sr&&du(gt,Qn),An}function Qr(gt,pt,yt,It){if(typeof yt=="object"&&yt!==null&&yt.type===v&&yt.key===null&&(yt=yt.props.children),typeof yt=="object"&&yt!==null){switch(yt.$$typeof){case f:e:{for(var An=yt.key;pt!==null;){if(pt.key===An){if(An=yt.type,An===v){if(pt.tag===7){_(gt,pt.sibling),It=V(pt,yt.props.children),It.return=gt,gt=It;break e}}else if(pt.elementType===An||typeof An=="object"&&An!==null&&An.$$typeof===F&&sf(An)===pt.type){_(gt,pt.sibling),It=V(pt,yt.props),iv(It,yt),It.return=gt,gt=It;break e}_(gt,pt);break}else y(gt,pt);pt=pt.sibling}yt.type===v?(It=ef(yt.props.children,gt.mode,It,yt.key),It.return=gt,gt=It):(It=t_(yt.type,yt.key,yt.props,null,gt.mode,It),iv(It,yt),It.return=gt,gt=It)}return Ne(gt);case x:e:{for(An=yt.key;pt!==null;){if(pt.key===An)if(pt.tag===4&&pt.stateNode.containerInfo===yt.containerInfo&&pt.stateNode.implementation===yt.implementation){_(gt,pt.sibling),It=V(pt,yt.children||[]),It.return=gt,gt=It;break e}else{_(gt,pt);break}else y(gt,pt);pt=pt.sibling}It=HA(yt,gt.mode,It),It.return=gt,gt=It}return Ne(gt);case F:return yt=sf(yt),Qr(gt,pt,yt,It)}if(ne(yt))return bn(gt,pt,yt,It);if(z(yt)){if(An=z(yt),typeof An!="function")throw Error(r(150));return yt=An.call(yt),In(gt,pt,yt,It)}if(typeof yt.then=="function")return Qr(gt,pt,l_(yt),It);if(yt.$$typeof===N)return Qr(gt,pt,a_(gt,yt),It);c_(gt,yt)}return typeof yt=="string"&&yt!==""||typeof yt=="number"||typeof yt=="bigint"?(yt=""+yt,pt!==null&&pt.tag===6?(_(gt,pt.sibling),It=V(pt,yt),It.return=gt,gt=It):(_(gt,pt),It=BA(yt,gt.mode,It),It.return=gt,gt=It),Ne(gt)):_(gt,pt)}return function(gt,pt,yt,It){try{av=0;var An=Qr(gt,pt,yt,It);return mb=null,An}catch(vn){if(vn===ub||vn===s_)throw vn;var Er=Ko(29,vn,null,gt.mode);return Er.lanes=It,Er.return=gt,Er}}}var lf=cU(!0),dU=cU(!1),Ym=!1;function ej(h){h.updateQueue={baseState:h.memoizedState,firstBaseUpdate:null,lastBaseUpdate:null,shared:{pending:null,lanes:0,hiddenCallbacks:null},callbacks:null}}function tj(h,y){h=h.updateQueue,y.updateQueue===h&&(y.updateQueue={baseState:h.baseState,firstBaseUpdate:h.firstBaseUpdate,lastBaseUpdate:h.lastBaseUpdate,shared:h.shared,callbacks:null})}function Qm(h){return{lane:h,tag:0,payload:null,callback:null,next:null}}function Jm(h,y,_){var j=h.updateQueue;if(j===null)return null;if(j=j.shared,(Lr&2)!==0){var V=j.pending;return V===null?y.next=y:(y.next=V.next,V.next=y),j.pending=y,y=e_(h),W5(h,null,_),y}return ZS(h,j,y,_),e_(h)}function sv(h,y,_){if(y=y.updateQueue,y!==null&&(y=y.shared,(_&4194048)!==0)){var j=y.lanes;j&=h.pendingLanes,_|=j,y.lanes=_,qt(h,_)}}function nj(h,y){var _=h.updateQueue,j=h.alternate;if(j!==null&&(j=j.updateQueue,_===j)){var V=null,Z=null;if(_=_.firstBaseUpdate,_!==null){do{var Ne={lane:_.lane,tag:_.tag,payload:_.payload,callback:null,next:null};Z===null?V=Z=Ne:Z=Z.next=Ne,_=_.next}while(_!==null);Z===null?V=Z=y:Z=Z.next=y}else V=Z=y;_={baseState:j.baseState,firstBaseUpdate:V,lastBaseUpdate:Z,shared:j.shared,callbacks:j.callbacks},h.updateQueue=_;return}h=_.lastBaseUpdate,h===null?_.firstBaseUpdate=y:h.next=y,_.lastBaseUpdate=y}var rj=!1;function ov(){if(rj){var h=db;if(h!==null)throw h}}function lv(h,y,_,j){rj=!1;var V=h.updateQueue;Ym=!1;var Z=V.firstBaseUpdate,Ne=V.lastBaseUpdate,qe=V.shared.pending;if(qe!==null){V.shared.pending=null;var lt=qe,vt=lt.next;lt.next=null,Ne===null?Z=vt:Ne.next=vt,Ne=lt;var Rt=h.alternate;Rt!==null&&(Rt=Rt.updateQueue,qe=Rt.lastBaseUpdate,qe!==Ne&&(qe===null?Rt.firstBaseUpdate=vt:qe.next=vt,Rt.lastBaseUpdate=lt))}if(Z!==null){var Ut=V.baseState;Ne=0,Rt=vt=lt=null,qe=Z;do{var kt=qe.lane&-536870913,At=kt!==qe.lane;if(At?(yr&kt)===kt:(j&kt)===kt){kt!==0&&kt===cb&&(rj=!0),Rt!==null&&(Rt=Rt.next={lane:0,tag:qe.tag,payload:qe.payload,callback:null,next:null});e:{var bn=h,In=qe;kt=y;var Qr=_;switch(In.tag){case 1:if(bn=In.payload,typeof bn=="function"){Ut=bn.call(Qr,Ut,kt);break e}Ut=bn;break e;case 3:bn.flags=bn.flags&-65537|128;case 0:if(bn=In.payload,kt=typeof bn=="function"?bn.call(Qr,Ut,kt):bn,kt==null)break e;Ut=m({},Ut,kt);break e;case 2:Ym=!0}}kt=qe.callback,kt!==null&&(h.flags|=64,At&&(h.flags|=8192),At=V.callbacks,At===null?V.callbacks=[kt]:At.push(kt))}else At={lane:kt,tag:qe.tag,payload:qe.payload,callback:qe.callback,next:null},Rt===null?(vt=Rt=At,lt=Ut):Rt=Rt.next=At,Ne|=kt;if(qe=qe.next,qe===null){if(qe=V.shared.pending,qe===null)break;At=qe,qe=At.next,At.next=null,V.lastBaseUpdate=At,V.shared.pending=null}}while(!0);Rt===null&&(lt=Ut),V.baseState=lt,V.firstBaseUpdate=vt,V.lastBaseUpdate=Rt,Z===null&&(V.shared.lanes=0),rh|=Ne,h.lanes=Ne,h.memoizedState=Ut}}function uU(h,y){if(typeof h!="function")throw Error(r(191,h));h.call(y)}function mU(h,y){var _=h.callbacks;if(_!==null)for(h.callbacks=null,h=0;h<_.length;h++)uU(_[h],y)}var hb=K(null),d_=K(0);function hU(h,y){h=wu,pe(d_,h),pe(hb,y),wu=h|y.baseLanes}function aj(){pe(d_,wu),pe(hb,hb.current)}function ij(){wu=d_.current,ae(hb),ae(d_)}var Xo=K(null),Dl=null;function Zm(h){var y=h.alternate;pe(ai,ai.current&1),pe(Xo,h),Dl===null&&(y===null||hb.current!==null||y.memoizedState!==null)&&(Dl=h)}function sj(h){pe(ai,ai.current),pe(Xo,h),Dl===null&&(Dl=h)}function pU(h){h.tag===22?(pe(ai,ai.current),pe(Xo,h),Dl===null&&(Dl=h)):eh()}function eh(){pe(ai,ai.current),pe(Xo,Xo.current)}function Yo(h){ae(Xo),Dl===h&&(Dl=null),ae(ai)}var ai=K(0);function u_(h){for(var y=h;y!==null;){if(y.tag===13){var _=y.memoizedState;if(_!==null&&(_=_.dehydrated,_===null||mM(_)||hM(_)))return y}else if(y.tag===19&&(y.memoizedProps.revealOrder==="forwards"||y.memoizedProps.revealOrder==="backwards"||y.memoizedProps.revealOrder==="unstable_legacy-backwards"||y.memoizedProps.revealOrder==="together")){if((y.flags&128)!==0)return y}else if(y.child!==null){y.child.return=y,y=y.child;continue}if(y===h)break;for(;y.sibling===null;){if(y.return===null||y.return===h)return null;y=y.return}y.sibling.return=y.return,y=y.sibling}return null}var hu=0,Xn=null,Xr=null,mi=null,m_=!1,pb=!1,cf=!1,h_=0,cv=0,fb=null,Jce=0;function $a(){throw Error(r(321))}function oj(h,y){if(y===null)return!1;for(var _=0;_<y.length&&_<h.length;_++)if(!_o(h[_],y[_]))return!1;return!0}function lj(h,y,_,j,V,Z){return hu=Z,Xn=y,y.memoizedState=null,y.updateQueue=null,y.lanes=0,re.H=h===null||h.memoizedState===null?QU:_j,cf=!1,Z=_(j,V),cf=!1,pb&&(Z=gU(y,_,j,V)),fU(h),Z}function fU(h){re.H=mv;var y=Xr!==null&&Xr.next!==null;if(hu=0,mi=Xr=Xn=null,m_=!1,cv=0,fb=null,y)throw Error(r(300));h===null||hi||(h=h.dependencies,h!==null&&r_(h)&&(hi=!0))}function gU(h,y,_,j){Xn=h;var V=0;do{if(pb&&(fb=null),cv=0,pb=!1,25<=V)throw Error(r(301));if(V+=1,mi=Xr=null,h.updateQueue!=null){var Z=h.updateQueue;Z.lastEffect=null,Z.events=null,Z.stores=null,Z.memoCache!=null&&(Z.memoCache.index=0)}re.H=JU,Z=y(_,j)}while(pb);return Z}function Zce(){var h=re.H,y=h.useState()[0];return y=typeof y.then=="function"?dv(y):y,h=h.useState()[0],(Xr!==null?Xr.memoizedState:null)!==h&&(Xn.flags|=1024),y}function cj(){var h=h_!==0;return h_=0,h}function dj(h,y,_){y.updateQueue=h.updateQueue,y.flags&=-2053,h.lanes&=~_}function uj(h){if(m_){for(h=h.memoizedState;h!==null;){var y=h.queue;y!==null&&(y.pending=null),h=h.next}m_=!1}hu=0,mi=Xr=Xn=null,pb=!1,cv=h_=0,fb=null}function Zs(){var h={memoizedState:null,baseState:null,baseQueue:null,queue:null,next:null};return mi===null?Xn.memoizedState=mi=h:mi=mi.next=h,mi}function ii(){if(Xr===null){var h=Xn.alternate;h=h!==null?h.memoizedState:null}else h=Xr.next;var y=mi===null?Xn.memoizedState:mi.next;if(y!==null)mi=y,Xr=h;else{if(h===null)throw Xn.alternate===null?Error(r(467)):Error(r(310));Xr=h,h={memoizedState:Xr.memoizedState,baseState:Xr.baseState,baseQueue:Xr.baseQueue,queue:Xr.queue,next:null},mi===null?Xn.memoizedState=mi=h:mi=mi.next=h}return mi}function p_(){return{lastEffect:null,events:null,stores:null,memoCache:null}}function dv(h){var y=cv;return cv+=1,fb===null&&(fb=[]),h=sU(fb,h,y),y=Xn,(mi===null?y.memoizedState:mi.next)===null&&(y=y.alternate,re.H=y===null||y.memoizedState===null?QU:_j),h}function f_(h){if(h!==null&&typeof h=="object"){if(typeof h.then=="function")return dv(h);if(h.$$typeof===N)return ds(h)}throw Error(r(438,String(h)))}function mj(h){var y=null,_=Xn.updateQueue;if(_!==null&&(y=_.memoCache),y==null){var j=Xn.alternate;j!==null&&(j=j.updateQueue,j!==null&&(j=j.memoCache,j!=null&&(y={data:j.data.map(function(V){return V.slice()}),index:0})))}if(y==null&&(y={data:[],index:0}),_===null&&(_=p_(),Xn.updateQueue=_),_.memoCache=y,_=y.data[y.index],_===void 0)for(_=y.data[y.index]=Array(h),j=0;j<h;j++)_[j]=E;return y.index++,_}function pu(h,y){return typeof y=="function"?y(h):y}function g_(h){var y=ii();return hj(y,Xr,h)}function hj(h,y,_){var j=h.queue;if(j===null)throw Error(r(311));j.lastRenderedReducer=_;var V=h.baseQueue,Z=j.pending;if(Z!==null){if(V!==null){var Ne=V.next;V.next=Z.next,Z.next=Ne}y.baseQueue=V=Z,j.pending=null}if(Z=h.baseState,V===null)h.memoizedState=Z;else{y=V.next;var qe=Ne=null,lt=null,vt=y,Rt=!1;do{var Ut=vt.lane&-536870913;if(Ut!==vt.lane?(yr&Ut)===Ut:(hu&Ut)===Ut){var kt=vt.revertLane;if(kt===0)lt!==null&&(lt=lt.next={lane:0,revertLane:0,gesture:null,action:vt.action,hasEagerState:vt.hasEagerState,eagerState:vt.eagerState,next:null}),Ut===cb&&(Rt=!0);else if((hu&kt)===kt){vt=vt.next,kt===cb&&(Rt=!0);continue}else Ut={lane:0,revertLane:vt.revertLane,gesture:null,action:vt.action,hasEagerState:vt.hasEagerState,eagerState:vt.eagerState,next:null},lt===null?(qe=lt=Ut,Ne=Z):lt=lt.next=Ut,Xn.lanes|=kt,rh|=kt;Ut=vt.action,cf&&_(Z,Ut),Z=vt.hasEagerState?vt.eagerState:_(Z,Ut)}else kt={lane:Ut,revertLane:vt.revertLane,gesture:vt.gesture,action:vt.action,hasEagerState:vt.hasEagerState,eagerState:vt.eagerState,next:null},lt===null?(qe=lt=kt,Ne=Z):lt=lt.next=kt,Xn.lanes|=Ut,rh|=Ut;vt=vt.next}while(vt!==null&&vt!==y);if(lt===null?Ne=Z:lt.next=qe,!_o(Z,h.memoizedState)&&(hi=!0,Rt&&(_=db,_!==null)))throw _;h.memoizedState=Z,h.baseState=Ne,h.baseQueue=lt,j.lastRenderedState=Z}return V===null&&(j.lanes=0),[h.memoizedState,j.dispatch]}function pj(h){var y=ii(),_=y.queue;if(_===null)throw Error(r(311));_.lastRenderedReducer=h;var j=_.dispatch,V=_.pending,Z=y.memoizedState;if(V!==null){_.pending=null;var Ne=V=V.next;do Z=h(Z,Ne.action),Ne=Ne.next;while(Ne!==V);_o(Z,y.memoizedState)||(hi=!0),y.memoizedState=Z,y.baseQueue===null&&(y.baseState=Z),_.lastRenderedState=Z}return[Z,j]}function bU(h,y,_){var j=Xn,V=ii(),Z=Sr;if(Z){if(_===void 0)throw Error(r(407));_=_()}else _=y();var Ne=!_o((Xr||V).memoizedState,_);if(Ne&&(V.memoizedState=_,hi=!0),V=V.queue,bj(vU.bind(null,j,V,h),[h]),V.getSnapshot!==y||Ne||mi!==null&&mi.memoizedState.tag&1){if(j.flags|=2048,gb(9,{destroy:void 0},yU.bind(null,j,V,_,y),null),oa===null)throw Error(r(349));Z||(hu&127)!==0||xU(j,y,_)}return _}function xU(h,y,_){h.flags|=16384,h={getSnapshot:y,value:_},y=Xn.updateQueue,y===null?(y=p_(),Xn.updateQueue=y,y.stores=[h]):(_=y.stores,_===null?y.stores=[h]:_.push(h))}function yU(h,y,_,j){y.value=_,y.getSnapshot=j,wU(y)&&SU(h)}function vU(h,y,_){return _(function(){wU(y)&&SU(h)})}function wU(h){var y=h.getSnapshot;h=h.value;try{var _=y();return!_o(h,_)}catch{return!0}}function SU(h){var y=Zp(h,2);y!==null&&To(y,h,2)}function fj(h){var y=Zs();if(typeof h=="function"){var _=h;if(h=_(),cf){Me(!0);try{_()}finally{Me(!1)}}}return y.memoizedState=y.baseState=h,y.queue={pending:null,lanes:0,dispatch:null,lastRenderedReducer:pu,lastRenderedState:h},y}function _U(h,y,_,j){return h.baseState=_,hj(h,Xr,typeof j=="function"?j:pu)}function ede(h,y,_,j,V){if(y_(h))throw Error(r(485));if(h=y.action,h!==null){var Z={payload:V,action:h,next:null,isTransition:!0,status:"pending",value:null,reason:null,listeners:[],then:function(Ne){Z.listeners.push(Ne)}};re.T!==null?_(!0):Z.isTransition=!1,j(Z),_=y.pending,_===null?(Z.next=y.pending=Z,kU(y,Z)):(Z.next=_.next,y.pending=_.next=Z)}}function kU(h,y){var _=y.action,j=y.payload,V=h.state;if(y.isTransition){var Z=re.T,Ne={};re.T=Ne;try{var qe=_(V,j),lt=re.S;lt!==null&&lt(Ne,qe),NU(h,y,qe)}catch(vt){gj(h,y,vt)}finally{Z!==null&&Ne.types!==null&&(Z.types=Ne.types),re.T=Z}}else try{Z=_(V,j),NU(h,y,Z)}catch(vt){gj(h,y,vt)}}function NU(h,y,_){_!==null&&typeof _=="object"&&typeof _.then=="function"?_.then(function(j){CU(h,y,j)},function(j){return gj(h,y,j)}):CU(h,y,_)}function CU(h,y,_){y.status="fulfilled",y.value=_,PU(y),h.state=_,y=h.pending,y!==null&&(_=y.next,_===y?h.pending=null:(_=_.next,y.next=_,kU(h,_)))}function gj(h,y,_){var j=h.pending;if(h.pending=null,j!==null){j=j.next;do y.status="rejected",y.reason=_,PU(y),y=y.next;while(y!==j)}h.action=null}function PU(h){h=h.listeners;for(var y=0;y<h.length;y++)(0,h[y])()}function TU(h,y){return y}function AU(h,y){if(Sr){var _=oa.formState;if(_!==null){e:{var j=Xn;if(Sr){if(xa){t:{for(var V=xa,Z=El;V.nodeType!==8;){if(!Z){V=null;break t}if(V=Fl(V.nextSibling),V===null){V=null;break t}}Z=V.data,V=Z==="F!"||Z==="F"?V:null}if(V){xa=Fl(V.nextSibling),j=V.data==="F!";break e}}Km(j)}j=!1}j&&(y=_[0])}}return _=Zs(),_.memoizedState=_.baseState=y,j={pending:null,lanes:0,dispatch:null,lastRenderedReducer:TU,lastRenderedState:y},_.queue=j,_=KU.bind(null,Xn,j),j.dispatch=_,j=fj(!1),Z=Sj.bind(null,Xn,!1,j.queue),j=Zs(),V={state:y,dispatch:null,action:h,pending:null},j.queue=V,_=ede.bind(null,Xn,V,Z,_),V.dispatch=_,j.memoizedState=h,[y,_,!1]}function jU(h){var y=ii();return MU(y,Xr,h)}function MU(h,y,_){if(y=hj(h,y,TU)[0],h=g_(pu)[0],typeof y=="object"&&y!==null&&typeof y.then=="function")try{var j=dv(y)}catch(Ne){throw Ne===ub?s_:Ne}else j=y;y=ii();var V=y.queue,Z=V.dispatch;return _!==y.memoizedState&&(Xn.flags|=2048,gb(9,{destroy:void 0},tde.bind(null,V,_),null)),[j,Z,h]}function tde(h,y){h.action=y}function EU(h){var y=ii(),_=Xr;if(_!==null)return MU(y,_,h);ii(),y=y.memoizedState,_=ii();var j=_.queue.dispatch;return _.memoizedState=h,[y,j,!1]}function gb(h,y,_,j){return h={tag:h,create:_,deps:j,inst:y,next:null},y=Xn.updateQueue,y===null&&(y=p_(),Xn.updateQueue=y),_=y.lastEffect,_===null?y.lastEffect=h.next=h:(j=_.next,_.next=h,h.next=j,y.lastEffect=h),h}function DU(){return ii().memoizedState}function b_(h,y,_,j){var V=Zs();Xn.flags|=h,V.memoizedState=gb(1|y,{destroy:void 0},_,j===void 0?null:j)}function x_(h,y,_,j){var V=ii();j=j===void 0?null:j;var Z=V.memoizedState.inst;Xr!==null&&j!==null&&oj(j,Xr.memoizedState.deps)?V.memoizedState=gb(y,Z,_,j):(Xn.flags|=h,V.memoizedState=gb(1|y,Z,_,j))}function FU(h,y){b_(8390656,8,h,y)}function bj(h,y){x_(2048,8,h,y)}function nde(h){Xn.flags|=4;var y=Xn.updateQueue;if(y===null)y=p_(),Xn.updateQueue=y,y.events=[h];else{var _=y.events;_===null?y.events=[h]:_.push(h)}}function RU(h){var y=ii().memoizedState;return nde({ref:y,nextImpl:h}),function(){if((Lr&2)!==0)throw Error(r(440));return y.impl.apply(void 0,arguments)}}function LU(h,y){return x_(4,2,h,y)}function IU(h,y){return x_(4,4,h,y)}function OU(h,y){if(typeof y=="function"){h=h();var _=y(h);return function(){typeof _=="function"?_():y(null)}}if(y!=null)return h=h(),y.current=h,function(){y.current=null}}function zU(h,y,_){_=_!=null?_.concat([h]):null,x_(4,4,OU.bind(null,y,h),_)}function xj(){}function UU(h,y){var _=ii();y=y===void 0?null:y;var j=_.memoizedState;return y!==null&&oj(y,j[1])?j[0]:(_.memoizedState=[h,y],h)}function BU(h,y){var _=ii();y=y===void 0?null:y;var j=_.memoizedState;if(y!==null&&oj(y,j[1]))return j[0];if(j=h(),cf){Me(!0);try{h()}finally{Me(!1)}}return _.memoizedState=[j,y],j}function yj(h,y,_){return _===void 0||(hu&1073741824)!==0&&(yr&261930)===0?h.memoizedState=y:(h.memoizedState=_,h=HB(),Xn.lanes|=h,rh|=h,_)}function HU(h,y,_,j){return _o(_,y)?_:hb.current!==null?(h=yj(h,_,j),_o(h,y)||(hi=!0),h):(hu&42)===0||(hu&1073741824)!==0&&(yr&261930)===0?(hi=!0,h.memoizedState=_):(h=HB(),Xn.lanes|=h,rh|=h,y)}function qU(h,y,_,j,V){var Z=J.p;J.p=Z!==0&&8>Z?Z:8;var Ne=re.T,qe={};re.T=qe,Sj(h,!1,y,_);try{var lt=V(),vt=re.S;if(vt!==null&&vt(qe,lt),lt!==null&&typeof lt=="object"&&typeof lt.then=="function"){var Rt=Qce(lt,j);uv(h,y,Rt,Zo(h))}else uv(h,y,j,Zo(h))}catch(Ut){uv(h,y,{then:function(){},status:"rejected",reason:Ut},Zo())}finally{J.p=Z,Ne!==null&&qe.types!==null&&(Ne.types=qe.types),re.T=Ne}}function rde(){}function vj(h,y,_,j){if(h.tag!==5)throw Error(r(476));var V=$U(h).queue;qU(h,V,y,ue,_===null?rde:function(){return VU(h),_(j)})}function $U(h){var y=h.memoizedState;if(y!==null)return y;y={memoizedState:ue,baseState:ue,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:pu,lastRenderedState:ue},next:null};var _={};return y.next={memoizedState:_,baseState:_,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:pu,lastRenderedState:_},next:null},h.memoizedState=y,h=h.alternate,h!==null&&(h.memoizedState=y),y}function VU(h){var y=$U(h);y.next===null&&(y=h.alternate.memoizedState),uv(h,y.next.queue,{},Zo())}function wj(){return ds(Tv)}function GU(){return ii().memoizedState}function WU(){return ii().memoizedState}function ade(h){for(var y=h.return;y!==null;){switch(y.tag){case 24:case 3:var _=Zo();h=Qm(_);var j=Jm(y,h,_);j!==null&&(To(j,y,_),sv(j,y,_)),y={cache:YA()},h.payload=y;return}y=y.return}}function ide(h,y,_){var j=Zo();_={lane:j,revertLane:0,gesture:null,action:_,hasEagerState:!1,eagerState:null,next:null},y_(h)?XU(y,_):(_=zA(h,y,_,j),_!==null&&(To(_,h,j),YU(_,y,j)))}function KU(h,y,_){var j=Zo();uv(h,y,_,j)}function uv(h,y,_,j){var V={lane:j,revertLane:0,gesture:null,action:_,hasEagerState:!1,eagerState:null,next:null};if(y_(h))XU(y,V);else{var Z=h.alternate;if(h.lanes===0&&(Z===null||Z.lanes===0)&&(Z=y.lastRenderedReducer,Z!==null))try{var Ne=y.lastRenderedState,qe=Z(Ne,_);if(V.hasEagerState=!0,V.eagerState=qe,_o(qe,Ne))return ZS(h,y,V,0),oa===null&&JS(),!1}catch{}if(_=zA(h,y,V,j),_!==null)return To(_,h,j),YU(_,y,j),!0}return!1}function Sj(h,y,_,j){if(j={lane:2,revertLane:eM(),gesture:null,action:j,hasEagerState:!1,eagerState:null,next:null},y_(h)){if(y)throw Error(r(479))}else y=zA(h,_,j,2),y!==null&&To(y,h,2)}function y_(h){var y=h.alternate;return h===Xn||y!==null&&y===Xn}function XU(h,y){pb=m_=!0;var _=h.pending;_===null?y.next=y:(y.next=_.next,_.next=y),h.pending=y}function YU(h,y,_){if((_&4194048)!==0){var j=y.lanes;j&=h.pendingLanes,_|=j,y.lanes=_,qt(h,_)}}var mv={readContext:ds,use:f_,useCallback:$a,useContext:$a,useEffect:$a,useImperativeHandle:$a,useLayoutEffect:$a,useInsertionEffect:$a,useMemo:$a,useReducer:$a,useRef:$a,useState:$a,useDebugValue:$a,useDeferredValue:$a,useTransition:$a,useSyncExternalStore:$a,useId:$a,useHostTransitionStatus:$a,useFormState:$a,useActionState:$a,useOptimistic:$a,useMemoCache:$a,useCacheRefresh:$a};mv.useEffectEvent=$a;var QU={readContext:ds,use:f_,useCallback:function(h,y){return Zs().memoizedState=[h,y===void 0?null:y],h},useContext:ds,useEffect:FU,useImperativeHandle:function(h,y,_){_=_!=null?_.concat([h]):null,b_(4194308,4,OU.bind(null,y,h),_)},useLayoutEffect:function(h,y){return b_(4194308,4,h,y)},useInsertionEffect:function(h,y){b_(4,2,h,y)},useMemo:function(h,y){var _=Zs();y=y===void 0?null:y;var j=h();if(cf){Me(!0);try{h()}finally{Me(!1)}}return _.memoizedState=[j,y],j},useReducer:function(h,y,_){var j=Zs();if(_!==void 0){var V=_(y);if(cf){Me(!0);try{_(y)}finally{Me(!1)}}}else V=y;return j.memoizedState=j.baseState=V,h={pending:null,lanes:0,dispatch:null,lastRenderedReducer:h,lastRenderedState:V},j.queue=h,h=h.dispatch=ide.bind(null,Xn,h),[j.memoizedState,h]},useRef:function(h){var y=Zs();return h={current:h},y.memoizedState=h},useState:function(h){h=fj(h);var y=h.queue,_=KU.bind(null,Xn,y);return y.dispatch=_,[h.memoizedState,_]},useDebugValue:xj,useDeferredValue:function(h,y){var _=Zs();return yj(_,h,y)},useTransition:function(){var h=fj(!1);return h=qU.bind(null,Xn,h.queue,!0,!1),Zs().memoizedState=h,[!1,h]},useSyncExternalStore:function(h,y,_){var j=Xn,V=Zs();if(Sr){if(_===void 0)throw Error(r(407));_=_()}else{if(_=y(),oa===null)throw Error(r(349));(yr&127)!==0||xU(j,y,_)}V.memoizedState=_;var Z={value:_,getSnapshot:y};return V.queue=Z,FU(vU.bind(null,j,Z,h),[h]),j.flags|=2048,gb(9,{destroy:void 0},yU.bind(null,j,Z,_,y),null),_},useId:function(){var h=Zs(),y=oa.identifierPrefix;if(Sr){var _=cd,j=ld;_=(j&~(1<<32-Oe(j)-1)).toString(32)+_,y="_"+y+"R_"+_,_=h_++,0<_&&(y+="H"+_.toString(32)),y+="_"}else _=Jce++,y="_"+y+"r_"+_.toString(32)+"_";return h.memoizedState=y},useHostTransitionStatus:wj,useFormState:AU,useActionState:AU,useOptimistic:function(h){var y=Zs();y.memoizedState=y.baseState=h;var _={pending:null,lanes:0,dispatch:null,lastRenderedReducer:null,lastRenderedState:null};return y.queue=_,y=Sj.bind(null,Xn,!0,_),_.dispatch=y,[h,y]},useMemoCache:mj,useCacheRefresh:function(){return Zs().memoizedState=ade.bind(null,Xn)},useEffectEvent:function(h){var y=Zs(),_={impl:h};return y.memoizedState=_,function(){if((Lr&2)!==0)throw Error(r(440));return _.impl.apply(void 0,arguments)}}},_j={readContext:ds,use:f_,useCallback:UU,useContext:ds,useEffect:bj,useImperativeHandle:zU,useInsertionEffect:LU,useLayoutEffect:IU,useMemo:BU,useReducer:g_,useRef:DU,useState:function(){return g_(pu)},useDebugValue:xj,useDeferredValue:function(h,y){var _=ii();return HU(_,Xr.memoizedState,h,y)},useTransition:function(){var h=g_(pu)[0],y=ii().memoizedState;return[typeof h=="boolean"?h:dv(h),y]},useSyncExternalStore:bU,useId:GU,useHostTransitionStatus:wj,useFormState:jU,useActionState:jU,useOptimistic:function(h,y){var _=ii();return _U(_,Xr,h,y)},useMemoCache:mj,useCacheRefresh:WU};_j.useEffectEvent=RU;var JU={readContext:ds,use:f_,useCallback:UU,useContext:ds,useEffect:bj,useImperativeHandle:zU,useInsertionEffect:LU,useLayoutEffect:IU,useMemo:BU,useReducer:pj,useRef:DU,useState:function(){return pj(pu)},useDebugValue:xj,useDeferredValue:function(h,y){var _=ii();return Xr===null?yj(_,h,y):HU(_,Xr.memoizedState,h,y)},useTransition:function(){var h=pj(pu)[0],y=ii().memoizedState;return[typeof h=="boolean"?h:dv(h),y]},useSyncExternalStore:bU,useId:GU,useHostTransitionStatus:wj,useFormState:EU,useActionState:EU,useOptimistic:function(h,y){var _=ii();return Xr!==null?_U(_,Xr,h,y):(_.baseState=h,[h,_.queue.dispatch])},useMemoCache:mj,useCacheRefresh:WU};JU.useEffectEvent=RU;function kj(h,y,_,j){y=h.memoizedState,_=_(j,y),_=_==null?y:m({},y,_),h.memoizedState=_,h.lanes===0&&(h.updateQueue.baseState=_)}var Nj={enqueueSetState:function(h,y,_){h=h._reactInternals;var j=Zo(),V=Qm(j);V.payload=y,_!=null&&(V.callback=_),y=Jm(h,V,j),y!==null&&(To(y,h,j),sv(y,h,j))},enqueueReplaceState:function(h,y,_){h=h._reactInternals;var j=Zo(),V=Qm(j);V.tag=1,V.payload=y,_!=null&&(V.callback=_),y=Jm(h,V,j),y!==null&&(To(y,h,j),sv(y,h,j))},enqueueForceUpdate:function(h,y){h=h._reactInternals;var _=Zo(),j=Qm(_);j.tag=2,y!=null&&(j.callback=y),y=Jm(h,j,_),y!==null&&(To(y,h,_),sv(y,h,_))}};function ZU(h,y,_,j,V,Z,Ne){return h=h.stateNode,typeof h.shouldComponentUpdate=="function"?h.shouldComponentUpdate(j,Z,Ne):y.prototype&&y.prototype.isPureReactComponent?!Vm(_,j)||!Vm(V,Z):!0}function eB(h,y,_,j){h=y.state,typeof y.componentWillReceiveProps=="function"&&y.componentWillReceiveProps(_,j),typeof y.UNSAFE_componentWillReceiveProps=="function"&&y.UNSAFE_componentWillReceiveProps(_,j),y.state!==h&&Nj.enqueueReplaceState(y,y.state,null)}function df(h,y){var _=y;if("ref"in y){_={};for(var j in y)j!=="ref"&&(_[j]=y[j])}if(h=h.defaultProps){_===y&&(_=m({},_));for(var V in h)_[V]===void 0&&(_[V]=h[V])}return _}function tB(h){QS(h)}function nB(h){console.error(h)}function rB(h){QS(h)}function v_(h,y){try{var _=h.onUncaughtError;_(y.value,{componentStack:y.stack})}catch(j){setTimeout(function(){throw j})}}function aB(h,y,_){try{var j=h.onCaughtError;j(_.value,{componentStack:_.stack,errorBoundary:y.tag===1?y.stateNode:null})}catch(V){setTimeout(function(){throw V})}}function Cj(h,y,_){return _=Qm(_),_.tag=3,_.payload={element:null},_.callback=function(){v_(h,y)},_}function iB(h){return h=Qm(h),h.tag=3,h}function sB(h,y,_,j){var V=_.type.getDerivedStateFromError;if(typeof V=="function"){var Z=j.value;h.payload=function(){return V(Z)},h.callback=function(){aB(y,_,j)}}var Ne=_.stateNode;Ne!==null&&typeof Ne.componentDidCatch=="function"&&(h.callback=function(){aB(y,_,j),typeof V!="function"&&(ah===null?ah=new Set([this]):ah.add(this));var qe=j.stack;this.componentDidCatch(j.value,{componentStack:qe!==null?qe:""})})}function sde(h,y,_,j,V){if(_.flags|=32768,j!==null&&typeof j=="object"&&typeof j.then=="function"){if(y=_.alternate,y!==null&&lb(y,_,V,!0),_=Xo.current,_!==null){switch(_.tag){case 31:case 13:return Dl===null?E_():_.alternate===null&&Va===0&&(Va=3),_.flags&=-257,_.flags|=65536,_.lanes=V,j===o_?_.flags|=16384:(y=_.updateQueue,y===null?_.updateQueue=new Set([j]):y.add(j),Qj(h,j,V)),!1;case 22:return _.flags|=65536,j===o_?_.flags|=16384:(y=_.updateQueue,y===null?(y={transitions:null,markerInstances:null,retryQueue:new Set([j])},_.updateQueue=y):(_=y.retryQueue,_===null?y.retryQueue=new Set([j]):_.add(j)),Qj(h,j,V)),!1}throw Error(r(435,_.tag))}return Qj(h,j,V),E_(),!1}if(Sr)return y=Xo.current,y!==null?((y.flags&65536)===0&&(y.flags|=256),y.flags|=65536,y.lanes=V,j!==VA&&(h=Error(r(422),{cause:j}),tv(Al(h,_)))):(j!==VA&&(y=Error(r(423),{cause:j}),tv(Al(y,_))),h=h.current.alternate,h.flags|=65536,V&=-V,h.lanes|=V,j=Al(j,_),V=Cj(h.stateNode,j,V),nj(h,V),Va!==4&&(Va=2)),!1;var Z=Error(r(520),{cause:j});if(Z=Al(Z,_),vv===null?vv=[Z]:vv.push(Z),Va!==4&&(Va=2),y===null)return!0;j=Al(j,_),_=y;do{switch(_.tag){case 3:return _.flags|=65536,h=V&-V,_.lanes|=h,h=Cj(_.stateNode,j,h),nj(_,h),!1;case 1:if(y=_.type,Z=_.stateNode,(_.flags&128)===0&&(typeof y.getDerivedStateFromError=="function"||Z!==null&&typeof Z.componentDidCatch=="function"&&(ah===null||!ah.has(Z))))return _.flags|=65536,V&=-V,_.lanes|=V,V=iB(V),sB(V,h,_,j),nj(_,V),!1}_=_.return}while(_!==null);return!1}var Pj=Error(r(461)),hi=!1;function us(h,y,_,j){y.child=h===null?dU(y,null,_,j):lf(y,h.child,_,j)}function oB(h,y,_,j,V){_=_.render;var Z=y.ref;if("ref"in j){var Ne={};for(var qe in j)qe!=="ref"&&(Ne[qe]=j[qe])}else Ne=j;return rf(y),j=lj(h,y,_,Ne,Z,V),qe=cj(),h!==null&&!hi?(dj(h,y,V),fu(h,y,V)):(Sr&&qe&&qA(y),y.flags|=1,us(h,y,j,V),y.child)}function lB(h,y,_,j,V){if(h===null){var Z=_.type;return typeof Z=="function"&&!UA(Z)&&Z.defaultProps===void 0&&_.compare===null?(y.tag=15,y.type=Z,cB(h,y,Z,j,V)):(h=t_(_.type,null,j,y,y.mode,V),h.ref=y.ref,h.return=y,y.child=h)}if(Z=h.child,!Rj(h,V)){var Ne=Z.memoizedProps;if(_=_.compare,_=_!==null?_:Vm,_(Ne,j)&&h.ref===y.ref)return fu(h,y,V)}return y.flags|=1,h=cu(Z,j),h.ref=y.ref,h.return=y,y.child=h}function cB(h,y,_,j,V){if(h!==null){var Z=h.memoizedProps;if(Vm(Z,j)&&h.ref===y.ref)if(hi=!1,y.pendingProps=j=Z,Rj(h,V))(h.flags&131072)!==0&&(hi=!0);else return y.lanes=h.lanes,fu(h,y,V)}return Tj(h,y,_,j,V)}function dB(h,y,_,j){var V=j.children,Z=h!==null?h.memoizedState:null;if(h===null&&y.stateNode===null&&(y.stateNode={_visibility:1,_pendingMarkers:null,_retryCache:null,_transitions:null}),j.mode==="hidden"){if((y.flags&128)!==0){if(Z=Z!==null?Z.baseLanes|_:_,h!==null){for(j=y.child=h.child,V=0;j!==null;)V=V|j.lanes|j.childLanes,j=j.sibling;j=V&~Z}else j=0,y.child=null;return uB(h,y,Z,_,j)}if((_&536870912)!==0)y.memoizedState={baseLanes:0,cachePool:null},h!==null&&i_(y,Z!==null?Z.cachePool:null),Z!==null?hU(y,Z):aj(),pU(y);else return j=y.lanes=536870912,uB(h,y,Z!==null?Z.baseLanes|_:_,_,j)}else Z!==null?(i_(y,Z.cachePool),hU(y,Z),eh(),y.memoizedState=null):(h!==null&&i_(y,null),aj(),eh());return us(h,y,V,_),y.child}function hv(h,y){return h!==null&&h.tag===22||y.stateNode!==null||(y.stateNode={_visibility:1,_pendingMarkers:null,_retryCache:null,_transitions:null}),y.sibling}function uB(h,y,_,j,V){var Z=JA();return Z=Z===null?null:{parent:ui._currentValue,pool:Z},y.memoizedState={baseLanes:_,cachePool:Z},h!==null&&i_(y,null),aj(),pU(y),h!==null&&lb(h,y,j,!0),y.childLanes=V,null}function w_(h,y){return y=__({mode:y.mode,children:y.children},h.mode),y.ref=h.ref,h.child=y,y.return=h,y}function mB(h,y,_){return lf(y,h.child,null,_),h=w_(y,y.pendingProps),h.flags|=2,Yo(y),y.memoizedState=null,h}function ode(h,y,_){var j=y.pendingProps,V=(y.flags&128)!==0;if(y.flags&=-129,h===null){if(Sr){if(j.mode==="hidden")return h=w_(y,j),y.lanes=536870912,hv(null,h);if(sj(y),(h=xa)?(h=k8(h,El),h=h!==null&&h.data==="&"?h:null,h!==null&&(y.memoizedState={dehydrated:h,treeContext:Gm!==null?{id:ld,overflow:cd}:null,retryLane:536870912,hydrationErrors:null},_=X5(h),_.return=y,y.child=_,cs=y,xa=null)):h=null,h===null)throw Km(y);return y.lanes=536870912,null}return w_(y,j)}var Z=h.memoizedState;if(Z!==null){var Ne=Z.dehydrated;if(sj(y),V)if(y.flags&256)y.flags&=-257,y=mB(h,y,_);else if(y.memoizedState!==null)y.child=h.child,y.flags|=128,y=null;else throw Error(r(558));else if(hi||lb(h,y,_,!1),V=(_&h.childLanes)!==0,hi||V){if(j=oa,j!==null&&(Ne=Vt(j,_),Ne!==0&&Ne!==Z.retryLane))throw Z.retryLane=Ne,Zp(h,Ne),To(j,h,Ne),Pj;E_(),y=mB(h,y,_)}else h=Z.treeContext,xa=Fl(Ne.nextSibling),cs=y,Sr=!0,Wm=null,El=!1,h!==null&&J5(y,h),y=w_(y,j),y.flags|=4096;return y}return h=cu(h.child,{mode:j.mode,children:j.children}),h.ref=y.ref,y.child=h,h.return=y,h}function S_(h,y){var _=y.ref;if(_===null)h!==null&&h.ref!==null&&(y.flags|=4194816);else{if(typeof _!="function"&&typeof _!="object")throw Error(r(284));(h===null||h.ref!==_)&&(y.flags|=4194816)}}function Tj(h,y,_,j,V){return rf(y),_=lj(h,y,_,j,void 0,V),j=cj(),h!==null&&!hi?(dj(h,y,V),fu(h,y,V)):(Sr&&j&&qA(y),y.flags|=1,us(h,y,_,V),y.child)}function hB(h,y,_,j,V,Z){return rf(y),y.updateQueue=null,_=gU(y,j,_,V),fU(h),j=cj(),h!==null&&!hi?(dj(h,y,Z),fu(h,y,Z)):(Sr&&j&&qA(y),y.flags|=1,us(h,y,_,Z),y.child)}function pB(h,y,_,j,V){if(rf(y),y.stateNode===null){var Z=ab,Ne=_.contextType;typeof Ne=="object"&&Ne!==null&&(Z=ds(Ne)),Z=new _(j,Z),y.memoizedState=Z.state!==null&&Z.state!==void 0?Z.state:null,Z.updater=Nj,y.stateNode=Z,Z._reactInternals=y,Z=y.stateNode,Z.props=j,Z.state=y.memoizedState,Z.refs={},ej(y),Ne=_.contextType,Z.context=typeof Ne=="object"&&Ne!==null?ds(Ne):ab,Z.state=y.memoizedState,Ne=_.getDerivedStateFromProps,typeof Ne=="function"&&(kj(y,_,Ne,j),Z.state=y.memoizedState),typeof _.getDerivedStateFromProps=="function"||typeof Z.getSnapshotBeforeUpdate=="function"||typeof Z.UNSAFE_componentWillMount!="function"&&typeof Z.componentWillMount!="function"||(Ne=Z.state,typeof Z.componentWillMount=="function"&&Z.componentWillMount(),typeof Z.UNSAFE_componentWillMount=="function"&&Z.UNSAFE_componentWillMount(),Ne!==Z.state&&Nj.enqueueReplaceState(Z,Z.state,null),lv(y,j,Z,V),ov(),Z.state=y.memoizedState),typeof Z.componentDidMount=="function"&&(y.flags|=4194308),j=!0}else if(h===null){Z=y.stateNode;var qe=y.memoizedProps,lt=df(_,qe);Z.props=lt;var vt=Z.context,Rt=_.contextType;Ne=ab,typeof Rt=="object"&&Rt!==null&&(Ne=ds(Rt));var Ut=_.getDerivedStateFromProps;Rt=typeof Ut=="function"||typeof Z.getSnapshotBeforeUpdate=="function",qe=y.pendingProps!==qe,Rt||typeof Z.UNSAFE_componentWillReceiveProps!="function"&&typeof Z.componentWillReceiveProps!="function"||(qe||vt!==Ne)&&eB(y,Z,j,Ne),Ym=!1;var kt=y.memoizedState;Z.state=kt,lv(y,j,Z,V),ov(),vt=y.memoizedState,qe||kt!==vt||Ym?(typeof Ut=="function"&&(kj(y,_,Ut,j),vt=y.memoizedState),(lt=Ym||ZU(y,_,lt,j,kt,vt,Ne))?(Rt||typeof Z.UNSAFE_componentWillMount!="function"&&typeof Z.componentWillMount!="function"||(typeof Z.componentWillMount=="function"&&Z.componentWillMount(),typeof Z.UNSAFE_componentWillMount=="function"&&Z.UNSAFE_componentWillMount()),typeof Z.componentDidMount=="function"&&(y.flags|=4194308)):(typeof Z.componentDidMount=="function"&&(y.flags|=4194308),y.memoizedProps=j,y.memoizedState=vt),Z.props=j,Z.state=vt,Z.context=Ne,j=lt):(typeof Z.componentDidMount=="function"&&(y.flags|=4194308),j=!1)}else{Z=y.stateNode,tj(h,y),Ne=y.memoizedProps,Rt=df(_,Ne),Z.props=Rt,Ut=y.pendingProps,kt=Z.context,vt=_.contextType,lt=ab,typeof vt=="object"&&vt!==null&&(lt=ds(vt)),qe=_.getDerivedStateFromProps,(vt=typeof qe=="function"||typeof Z.getSnapshotBeforeUpdate=="function")||typeof Z.UNSAFE_componentWillReceiveProps!="function"&&typeof Z.componentWillReceiveProps!="function"||(Ne!==Ut||kt!==lt)&&eB(y,Z,j,lt),Ym=!1,kt=y.memoizedState,Z.state=kt,lv(y,j,Z,V),ov();var At=y.memoizedState;Ne!==Ut||kt!==At||Ym||h!==null&&h.dependencies!==null&&r_(h.dependencies)?(typeof qe=="function"&&(kj(y,_,qe,j),At=y.memoizedState),(Rt=Ym||ZU(y,_,Rt,j,kt,At,lt)||h!==null&&h.dependencies!==null&&r_(h.dependencies))?(vt||typeof Z.UNSAFE_componentWillUpdate!="function"&&typeof Z.componentWillUpdate!="function"||(typeof Z.componentWillUpdate=="function"&&Z.componentWillUpdate(j,At,lt),typeof Z.UNSAFE_componentWillUpdate=="function"&&Z.UNSAFE_componentWillUpdate(j,At,lt)),typeof Z.componentDidUpdate=="function"&&(y.flags|=4),typeof Z.getSnapshotBeforeUpdate=="function"&&(y.flags|=1024)):(typeof Z.componentDidUpdate!="function"||Ne===h.memoizedProps&&kt===h.memoizedState||(y.flags|=4),typeof Z.getSnapshotBeforeUpdate!="function"||Ne===h.memoizedProps&&kt===h.memoizedState||(y.flags|=1024),y.memoizedProps=j,y.memoizedState=At),Z.props=j,Z.state=At,Z.context=lt,j=Rt):(typeof Z.componentDidUpdate!="function"||Ne===h.memoizedProps&&kt===h.memoizedState||(y.flags|=4),typeof Z.getSnapshotBeforeUpdate!="function"||Ne===h.memoizedProps&&kt===h.memoizedState||(y.flags|=1024),j=!1)}return Z=j,S_(h,y),j=(y.flags&128)!==0,Z||j?(Z=y.stateNode,_=j&&typeof _.getDerivedStateFromError!="function"?null:Z.render(),y.flags|=1,h!==null&&j?(y.child=lf(y,h.child,null,V),y.child=lf(y,null,_,V)):us(h,y,_,V),y.memoizedState=Z.state,h=y.child):h=fu(h,y,V),h}function fB(h,y,_,j){return tf(),y.flags|=256,us(h,y,_,j),y.child}var Aj={dehydrated:null,treeContext:null,retryLane:0,hydrationErrors:null};function jj(h){return{baseLanes:h,cachePool:aU()}}function Mj(h,y,_){return h=h!==null?h.childLanes&~_:0,y&&(h|=Jo),h}function gB(h,y,_){var j=y.pendingProps,V=!1,Z=(y.flags&128)!==0,Ne;if((Ne=Z)||(Ne=h!==null&&h.memoizedState===null?!1:(ai.current&2)!==0),Ne&&(V=!0,y.flags&=-129),Ne=(y.flags&32)!==0,y.flags&=-33,h===null){if(Sr){if(V?Zm(y):eh(),(h=xa)?(h=k8(h,El),h=h!==null&&h.data!=="&"?h:null,h!==null&&(y.memoizedState={dehydrated:h,treeContext:Gm!==null?{id:ld,overflow:cd}:null,retryLane:536870912,hydrationErrors:null},_=X5(h),_.return=y,y.child=_,cs=y,xa=null)):h=null,h===null)throw Km(y);return hM(h)?y.lanes=32:y.lanes=536870912,null}var qe=j.children;return j=j.fallback,V?(eh(),V=y.mode,qe=__({mode:"hidden",children:qe},V),j=ef(j,V,_,null),qe.return=y,j.return=y,qe.sibling=j,y.child=qe,j=y.child,j.memoizedState=jj(_),j.childLanes=Mj(h,Ne,_),y.memoizedState=Aj,hv(null,j)):(Zm(y),Ej(y,qe))}var lt=h.memoizedState;if(lt!==null&&(qe=lt.dehydrated,qe!==null)){if(Z)y.flags&256?(Zm(y),y.flags&=-257,y=Dj(h,y,_)):y.memoizedState!==null?(eh(),y.child=h.child,y.flags|=128,y=null):(eh(),qe=j.fallback,V=y.mode,j=__({mode:"visible",children:j.children},V),qe=ef(qe,V,_,null),qe.flags|=2,j.return=y,qe.return=y,j.sibling=qe,y.child=j,lf(y,h.child,null,_),j=y.child,j.memoizedState=jj(_),j.childLanes=Mj(h,Ne,_),y.memoizedState=Aj,y=hv(null,j));else if(Zm(y),hM(qe)){if(Ne=qe.nextSibling&&qe.nextSibling.dataset,Ne)var vt=Ne.dgst;Ne=vt,j=Error(r(419)),j.stack="",j.digest=Ne,tv({value:j,source:null,stack:null}),y=Dj(h,y,_)}else if(hi||lb(h,y,_,!1),Ne=(_&h.childLanes)!==0,hi||Ne){if(Ne=oa,Ne!==null&&(j=Vt(Ne,_),j!==0&&j!==lt.retryLane))throw lt.retryLane=j,Zp(h,j),To(Ne,h,j),Pj;mM(qe)||E_(),y=Dj(h,y,_)}else mM(qe)?(y.flags|=192,y.child=h.child,y=null):(h=lt.treeContext,xa=Fl(qe.nextSibling),cs=y,Sr=!0,Wm=null,El=!1,h!==null&&J5(y,h),y=Ej(y,j.children),y.flags|=4096);return y}return V?(eh(),qe=j.fallback,V=y.mode,lt=h.child,vt=lt.sibling,j=cu(lt,{mode:"hidden",children:j.children}),j.subtreeFlags=lt.subtreeFlags&65011712,vt!==null?qe=cu(vt,qe):(qe=ef(qe,V,_,null),qe.flags|=2),qe.return=y,j.return=y,j.sibling=qe,y.child=j,hv(null,j),j=y.child,qe=h.child.memoizedState,qe===null?qe=jj(_):(V=qe.cachePool,V!==null?(lt=ui._currentValue,V=V.parent!==lt?{parent:lt,pool:lt}:V):V=aU(),qe={baseLanes:qe.baseLanes|_,cachePool:V}),j.memoizedState=qe,j.childLanes=Mj(h,Ne,_),y.memoizedState=Aj,hv(h.child,j)):(Zm(y),_=h.child,h=_.sibling,_=cu(_,{mode:"visible",children:j.children}),_.return=y,_.sibling=null,h!==null&&(Ne=y.deletions,Ne===null?(y.deletions=[h],y.flags|=16):Ne.push(h)),y.child=_,y.memoizedState=null,_)}function Ej(h,y){return y=__({mode:"visible",children:y},h.mode),y.return=h,h.child=y}function __(h,y){return h=Ko(22,h,null,y),h.lanes=0,h}function Dj(h,y,_){return lf(y,h.child,null,_),h=Ej(y,y.pendingProps.children),h.flags|=2,y.memoizedState=null,h}function bB(h,y,_){h.lanes|=y;var j=h.alternate;j!==null&&(j.lanes|=y),KA(h.return,y,_)}function Fj(h,y,_,j,V,Z){var Ne=h.memoizedState;Ne===null?h.memoizedState={isBackwards:y,rendering:null,renderingStartTime:0,last:j,tail:_,tailMode:V,treeForkCount:Z}:(Ne.isBackwards=y,Ne.rendering=null,Ne.renderingStartTime=0,Ne.last=j,Ne.tail=_,Ne.tailMode=V,Ne.treeForkCount=Z)}function xB(h,y,_){var j=y.pendingProps,V=j.revealOrder,Z=j.tail;j=j.children;var Ne=ai.current,qe=(Ne&2)!==0;if(qe?(Ne=Ne&1|2,y.flags|=128):Ne&=1,pe(ai,Ne),us(h,y,j,_),j=Sr?ev:0,!qe&&h!==null&&(h.flags&128)!==0)e:for(h=y.child;h!==null;){if(h.tag===13)h.memoizedState!==null&&bB(h,_,y);else if(h.tag===19)bB(h,_,y);else if(h.child!==null){h.child.return=h,h=h.child;continue}if(h===y)break e;for(;h.sibling===null;){if(h.return===null||h.return===y)break e;h=h.return}h.sibling.return=h.return,h=h.sibling}switch(V){case"forwards":for(_=y.child,V=null;_!==null;)h=_.alternate,h!==null&&u_(h)===null&&(V=_),_=_.sibling;_=V,_===null?(V=y.child,y.child=null):(V=_.sibling,_.sibling=null),Fj(y,!1,V,_,Z,j);break;case"backwards":case"unstable_legacy-backwards":for(_=null,V=y.child,y.child=null;V!==null;){if(h=V.alternate,h!==null&&u_(h)===null){y.child=V;break}h=V.sibling,V.sibling=_,_=V,V=h}Fj(y,!0,_,null,Z,j);break;case"together":Fj(y,!1,null,null,void 0,j);break;default:y.memoizedState=null}return y.child}function fu(h,y,_){if(h!==null&&(y.dependencies=h.dependencies),rh|=y.lanes,(_&y.childLanes)===0)if(h!==null){if(lb(h,y,_,!1),(_&y.childLanes)===0)return null}else return null;if(h!==null&&y.child!==h.child)throw Error(r(153));if(y.child!==null){for(h=y.child,_=cu(h,h.pendingProps),y.child=_,_.return=y;h.sibling!==null;)h=h.sibling,_=_.sibling=cu(h,h.pendingProps),_.return=y;_.sibling=null}return y.child}function Rj(h,y){return(h.lanes&y)!==0?!0:(h=h.dependencies,!!(h!==null&&r_(h)))}function lde(h,y,_){switch(y.tag){case 3:D(y,y.stateNode.containerInfo),Xm(y,ui,h.memoizedState.cache),tf();break;case 27:case 5:U(y);break;case 4:D(y,y.stateNode.containerInfo);break;case 10:Xm(y,y.type,y.memoizedProps.value);break;case 31:if(y.memoizedState!==null)return y.flags|=128,sj(y),null;break;case 13:var j=y.memoizedState;if(j!==null)return j.dehydrated!==null?(Zm(y),y.flags|=128,null):(_&y.child.childLanes)!==0?gB(h,y,_):(Zm(y),h=fu(h,y,_),h!==null?h.sibling:null);Zm(y);break;case 19:var V=(h.flags&128)!==0;if(j=(_&y.childLanes)!==0,j||(lb(h,y,_,!1),j=(_&y.childLanes)!==0),V){if(j)return xB(h,y,_);y.flags|=128}if(V=y.memoizedState,V!==null&&(V.rendering=null,V.tail=null,V.lastEffect=null),pe(ai,ai.current),j)break;return null;case 22:return y.lanes=0,dB(h,y,_,y.pendingProps);case 24:Xm(y,ui,h.memoizedState.cache)}return fu(h,y,_)}function yB(h,y,_){if(h!==null)if(h.memoizedProps!==y.pendingProps)hi=!0;else{if(!Rj(h,_)&&(y.flags&128)===0)return hi=!1,lde(h,y,_);hi=(h.flags&131072)!==0}else hi=!1,Sr&&(y.flags&1048576)!==0&&Q5(y,ev,y.index);switch(y.lanes=0,y.tag){case 16:e:{var j=y.pendingProps;if(h=sf(y.elementType),y.type=h,typeof h=="function")UA(h)?(j=df(h,j),y.tag=1,y=pB(null,y,h,j,_)):(y.tag=0,y=Tj(null,y,h,j,_));else{if(h!=null){var V=h.$$typeof;if(V===P){y.tag=11,y=oB(null,y,h,j,_);break e}else if(V===T){y.tag=14,y=lB(null,y,h,j,_);break e}}throw y=R(h)||h,Error(r(306,y,""))}}return y;case 0:return Tj(h,y,y.type,y.pendingProps,_);case 1:return j=y.type,V=df(j,y.pendingProps),pB(h,y,j,V,_);case 3:e:{if(D(y,y.stateNode.containerInfo),h===null)throw Error(r(387));j=y.pendingProps;var Z=y.memoizedState;V=Z.element,tj(h,y),lv(y,j,null,_);var Ne=y.memoizedState;if(j=Ne.cache,Xm(y,ui,j),j!==Z.cache&&XA(y,[ui],_,!0),ov(),j=Ne.element,Z.isDehydrated)if(Z={element:j,isDehydrated:!1,cache:Ne.cache},y.updateQueue.baseState=Z,y.memoizedState=Z,y.flags&256){y=fB(h,y,j,_);break e}else if(j!==V){V=Al(Error(r(424)),y),tv(V),y=fB(h,y,j,_);break e}else for(h=y.stateNode.containerInfo,h.nodeType===9?h=h.body:h=h.nodeName==="HTML"?h.ownerDocument.body:h,xa=Fl(h.firstChild),cs=y,Sr=!0,Wm=null,El=!0,_=dU(y,null,j,_),y.child=_;_;)_.flags=_.flags&-3|4096,_=_.sibling;else{if(tf(),j===V){y=fu(h,y,_);break e}us(h,y,j,_)}y=y.child}return y;case 26:return S_(h,y),h===null?(_=j8(y.type,null,y.pendingProps,null))?y.memoizedState=_:Sr||(_=y.type,h=y.pendingProps,j=z_(B.current).createElement(_),j[jt]=y,j[Jt]=h,ms(j,_,h),nt(j),y.stateNode=j):y.memoizedState=j8(y.type,h.memoizedProps,y.pendingProps,h.memoizedState),null;case 27:return U(y),h===null&&Sr&&(j=y.stateNode=P8(y.type,y.pendingProps,B.current),cs=y,El=!0,V=xa,lh(y.type)?(pM=V,xa=Fl(j.firstChild)):xa=V),us(h,y,y.pendingProps.children,_),S_(h,y),h===null&&(y.flags|=4194304),y.child;case 5:return h===null&&Sr&&((V=j=xa)&&(j=Ode(j,y.type,y.pendingProps,El),j!==null?(y.stateNode=j,cs=y,xa=Fl(j.firstChild),El=!1,V=!0):V=!1),V||Km(y)),U(y),V=y.type,Z=y.pendingProps,Ne=h!==null?h.memoizedProps:null,j=Z.children,cM(V,Z)?j=null:Ne!==null&&cM(V,Ne)&&(y.flags|=32),y.memoizedState!==null&&(V=lj(h,y,Zce,null,null,_),Tv._currentValue=V),S_(h,y),us(h,y,j,_),y.child;case 6:return h===null&&Sr&&((h=_=xa)&&(_=zde(_,y.pendingProps,El),_!==null?(y.stateNode=_,cs=y,xa=null,h=!0):h=!1),h||Km(y)),null;case 13:return gB(h,y,_);case 4:return D(y,y.stateNode.containerInfo),j=y.pendingProps,h===null?y.child=lf(y,null,j,_):us(h,y,j,_),y.child;case 11:return oB(h,y,y.type,y.pendingProps,_);case 7:return us(h,y,y.pendingProps,_),y.child;case 8:return us(h,y,y.pendingProps.children,_),y.child;case 12:return us(h,y,y.pendingProps.children,_),y.child;case 10:return j=y.pendingProps,Xm(y,y.type,j.value),us(h,y,j.children,_),y.child;case 9:return V=y.type._context,j=y.pendingProps.children,rf(y),V=ds(V),j=j(V),y.flags|=1,us(h,y,j,_),y.child;case 14:return lB(h,y,y.type,y.pendingProps,_);case 15:return cB(h,y,y.type,y.pendingProps,_);case 19:return xB(h,y,_);case 31:return ode(h,y,_);case 22:return dB(h,y,_,y.pendingProps);case 24:return rf(y),j=ds(ui),h===null?(V=JA(),V===null&&(V=oa,Z=YA(),V.pooledCache=Z,Z.refCount++,Z!==null&&(V.pooledCacheLanes|=_),V=Z),y.memoizedState={parent:j,cache:V},ej(y),Xm(y,ui,V)):((h.lanes&_)!==0&&(tj(h,y),lv(y,null,null,_),ov()),V=h.memoizedState,Z=y.memoizedState,V.parent!==j?(V={parent:j,cache:j},y.memoizedState=V,y.lanes===0&&(y.memoizedState=y.updateQueue.baseState=V),Xm(y,ui,j)):(j=Z.cache,Xm(y,ui,j),j!==V.cache&&XA(y,[ui],_,!0))),us(h,y,y.pendingProps.children,_),y.child;case 29:throw y.pendingProps}throw Error(r(156,y.tag))}function gu(h){h.flags|=4}function Lj(h,y,_,j,V){if((y=(h.mode&32)!==0)&&(y=!1),y){if(h.flags|=16777216,(V&335544128)===V)if(h.stateNode.complete)h.flags|=8192;else if(GB())h.flags|=8192;else throw of=o_,ZA}else h.flags&=-16777217}function vB(h,y){if(y.type!=="stylesheet"||(y.state.loading&4)!==0)h.flags&=-16777217;else if(h.flags|=16777216,!R8(y))if(GB())h.flags|=8192;else throw of=o_,ZA}function k_(h,y){y!==null&&(h.flags|=4),h.flags&16384&&(y=h.tag!==22?st():536870912,h.lanes|=y,vb|=y)}function pv(h,y){if(!Sr)switch(h.tailMode){case"hidden":y=h.tail;for(var _=null;y!==null;)y.alternate!==null&&(_=y),y=y.sibling;_===null?h.tail=null:_.sibling=null;break;case"collapsed":_=h.tail;for(var j=null;_!==null;)_.alternate!==null&&(j=_),_=_.sibling;j===null?y||h.tail===null?h.tail=null:h.tail.sibling=null:j.sibling=null}}function ya(h){var y=h.alternate!==null&&h.alternate.child===h.child,_=0,j=0;if(y)for(var V=h.child;V!==null;)_|=V.lanes|V.childLanes,j|=V.subtreeFlags&65011712,j|=V.flags&65011712,V.return=h,V=V.sibling;else for(V=h.child;V!==null;)_|=V.lanes|V.childLanes,j|=V.subtreeFlags,j|=V.flags,V.return=h,V=V.sibling;return h.subtreeFlags|=j,h.childLanes=_,y}function cde(h,y,_){var j=y.pendingProps;switch($A(y),y.tag){case 16:case 15:case 0:case 11:case 7:case 8:case 12:case 9:case 14:return ya(y),null;case 1:return ya(y),null;case 3:return _=y.stateNode,j=null,h!==null&&(j=h.memoizedState.cache),y.memoizedState.cache!==j&&(y.flags|=2048),mu(ui),M(),_.pendingContext&&(_.context=_.pendingContext,_.pendingContext=null),(h===null||h.child===null)&&(ob(y)?gu(y):h===null||h.memoizedState.isDehydrated&&(y.flags&256)===0||(y.flags|=1024,GA())),ya(y),null;case 26:var V=y.type,Z=y.memoizedState;return h===null?(gu(y),Z!==null?(ya(y),vB(y,Z)):(ya(y),Lj(y,V,null,j,_))):Z?Z!==h.memoizedState?(gu(y),ya(y),vB(y,Z)):(ya(y),y.flags&=-16777217):(h=h.memoizedProps,h!==j&&gu(y),ya(y),Lj(y,V,h,j,_)),null;case 27:if(Q(y),_=B.current,V=y.type,h!==null&&y.stateNode!=null)h.memoizedProps!==j&&gu(y);else{if(!j){if(y.stateNode===null)throw Error(r(166));return ya(y),null}h=be.current,ob(y)?Z5(y):(h=P8(V,j,_),y.stateNode=h,gu(y))}return ya(y),null;case 5:if(Q(y),V=y.type,h!==null&&y.stateNode!=null)h.memoizedProps!==j&&gu(y);else{if(!j){if(y.stateNode===null)throw Error(r(166));return ya(y),null}if(Z=be.current,ob(y))Z5(y);else{var Ne=z_(B.current);switch(Z){case 1:Z=Ne.createElementNS("http://www.w3.org/2000/svg",V);break;case 2:Z=Ne.createElementNS("http://www.w3.org/1998/Math/MathML",V);break;default:switch(V){case"svg":Z=Ne.createElementNS("http://www.w3.org/2000/svg",V);break;case"math":Z=Ne.createElementNS("http://www.w3.org/1998/Math/MathML",V);break;case"script":Z=Ne.createElement("div"),Z.innerHTML="<script><\/script>",Z=Z.removeChild(Z.firstChild);break;case"select":Z=typeof j.is=="string"?Ne.createElement("select",{is:j.is}):Ne.createElement("select"),j.multiple?Z.multiple=!0:j.size&&(Z.size=j.size);break;default:Z=typeof j.is=="string"?Ne.createElement(V,{is:j.is}):Ne.createElement(V)}}Z[jt]=y,Z[Jt]=j;e:for(Ne=y.child;Ne!==null;){if(Ne.tag===5||Ne.tag===6)Z.appendChild(Ne.stateNode);else if(Ne.tag!==4&&Ne.tag!==27&&Ne.child!==null){Ne.child.return=Ne,Ne=Ne.child;continue}if(Ne===y)break e;for(;Ne.sibling===null;){if(Ne.return===null||Ne.return===y)break e;Ne=Ne.return}Ne.sibling.return=Ne.return,Ne=Ne.sibling}y.stateNode=Z;e:switch(ms(Z,V,j),V){case"button":case"input":case"select":case"textarea":j=!!j.autoFocus;break e;case"img":j=!0;break e;default:j=!1}j&&gu(y)}}return ya(y),Lj(y,y.type,h===null?null:h.memoizedProps,y.pendingProps,_),null;case 6:if(h&&y.stateNode!=null)h.memoizedProps!==j&&gu(y);else{if(typeof j!="string"&&y.stateNode===null)throw Error(r(166));if(h=B.current,ob(y)){if(h=y.stateNode,_=y.memoizedProps,j=null,V=cs,V!==null)switch(V.tag){case 27:case 5:j=V.memoizedProps}h[jt]=y,h=!!(h.nodeValue===_||j!==null&&j.suppressHydrationWarning===!0||g8(h.nodeValue,_)),h||Km(y,!0)}else h=z_(h).createTextNode(j),h[jt]=y,y.stateNode=h}return ya(y),null;case 31:if(_=y.memoizedState,h===null||h.memoizedState!==null){if(j=ob(y),_!==null){if(h===null){if(!j)throw Error(r(318));if(h=y.memoizedState,h=h!==null?h.dehydrated:null,!h)throw Error(r(557));h[jt]=y}else tf(),(y.flags&128)===0&&(y.memoizedState=null),y.flags|=4;ya(y),h=!1}else _=GA(),h!==null&&h.memoizedState!==null&&(h.memoizedState.hydrationErrors=_),h=!0;if(!h)return y.flags&256?(Yo(y),y):(Yo(y),null);if((y.flags&128)!==0)throw Error(r(558))}return ya(y),null;case 13:if(j=y.memoizedState,h===null||h.memoizedState!==null&&h.memoizedState.dehydrated!==null){if(V=ob(y),j!==null&&j.dehydrated!==null){if(h===null){if(!V)throw Error(r(318));if(V=y.memoizedState,V=V!==null?V.dehydrated:null,!V)throw Error(r(317));V[jt]=y}else tf(),(y.flags&128)===0&&(y.memoizedState=null),y.flags|=4;ya(y),V=!1}else V=GA(),h!==null&&h.memoizedState!==null&&(h.memoizedState.hydrationErrors=V),V=!0;if(!V)return y.flags&256?(Yo(y),y):(Yo(y),null)}return Yo(y),(y.flags&128)!==0?(y.lanes=_,y):(_=j!==null,h=h!==null&&h.memoizedState!==null,_&&(j=y.child,V=null,j.alternate!==null&&j.alternate.memoizedState!==null&&j.alternate.memoizedState.cachePool!==null&&(V=j.alternate.memoizedState.cachePool.pool),Z=null,j.memoizedState!==null&&j.memoizedState.cachePool!==null&&(Z=j.memoizedState.cachePool.pool),Z!==V&&(j.flags|=2048)),_!==h&&_&&(y.child.flags|=8192),k_(y,y.updateQueue),ya(y),null);case 4:return M(),h===null&&aM(y.stateNode.containerInfo),ya(y),null;case 10:return mu(y.type),ya(y),null;case 19:if(ae(ai),j=y.memoizedState,j===null)return ya(y),null;if(V=(y.flags&128)!==0,Z=j.rendering,Z===null)if(V)pv(j,!1);else{if(Va!==0||h!==null&&(h.flags&128)!==0)for(h=y.child;h!==null;){if(Z=u_(h),Z!==null){for(y.flags|=128,pv(j,!1),h=Z.updateQueue,y.updateQueue=h,k_(y,h),y.subtreeFlags=0,h=_,_=y.child;_!==null;)K5(_,h),_=_.sibling;return pe(ai,ai.current&1|2),Sr&&du(y,j.treeForkCount),y.child}h=h.sibling}j.tail!==null&&L()>A_&&(y.flags|=128,V=!0,pv(j,!1),y.lanes=4194304)}else{if(!V)if(h=u_(Z),h!==null){if(y.flags|=128,V=!0,h=h.updateQueue,y.updateQueue=h,k_(y,h),pv(j,!0),j.tail===null&&j.tailMode==="hidden"&&!Z.alternate&&!Sr)return ya(y),null}else 2*L()-j.renderingStartTime>A_&&_!==536870912&&(y.flags|=128,V=!0,pv(j,!1),y.lanes=4194304);j.isBackwards?(Z.sibling=y.child,y.child=Z):(h=j.last,h!==null?h.sibling=Z:y.child=Z,j.last=Z)}return j.tail!==null?(h=j.tail,j.rendering=h,j.tail=h.sibling,j.renderingStartTime=L(),h.sibling=null,_=ai.current,pe(ai,V?_&1|2:_&1),Sr&&du(y,j.treeForkCount),h):(ya(y),null);case 22:case 23:return Yo(y),ij(),j=y.memoizedState!==null,h!==null?h.memoizedState!==null!==j&&(y.flags|=8192):j&&(y.flags|=8192),j?(_&536870912)!==0&&(y.flags&128)===0&&(ya(y),y.subtreeFlags&6&&(y.flags|=8192)):ya(y),_=y.updateQueue,_!==null&&k_(y,_.retryQueue),_=null,h!==null&&h.memoizedState!==null&&h.memoizedState.cachePool!==null&&(_=h.memoizedState.cachePool.pool),j=null,y.memoizedState!==null&&y.memoizedState.cachePool!==null&&(j=y.memoizedState.cachePool.pool),j!==_&&(y.flags|=2048),h!==null&&ae(af),null;case 24:return _=null,h!==null&&(_=h.memoizedState.cache),y.memoizedState.cache!==_&&(y.flags|=2048),mu(ui),ya(y),null;case 25:return null;case 30:return null}throw Error(r(156,y.tag))}function dde(h,y){switch($A(y),y.tag){case 1:return h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 3:return mu(ui),M(),h=y.flags,(h&65536)!==0&&(h&128)===0?(y.flags=h&-65537|128,y):null;case 26:case 27:case 5:return Q(y),null;case 31:if(y.memoizedState!==null){if(Yo(y),y.alternate===null)throw Error(r(340));tf()}return h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 13:if(Yo(y),h=y.memoizedState,h!==null&&h.dehydrated!==null){if(y.alternate===null)throw Error(r(340));tf()}return h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 19:return ae(ai),null;case 4:return M(),null;case 10:return mu(y.type),null;case 22:case 23:return Yo(y),ij(),h!==null&&ae(af),h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 24:return mu(ui),null;case 25:return null;default:return null}}function wB(h,y){switch($A(y),y.tag){case 3:mu(ui),M();break;case 26:case 27:case 5:Q(y);break;case 4:M();break;case 31:y.memoizedState!==null&&Yo(y);break;case 13:Yo(y);break;case 19:ae(ai);break;case 10:mu(y.type);break;case 22:case 23:Yo(y),ij(),h!==null&&ae(af);break;case 24:mu(ui)}}function fv(h,y){try{var _=y.updateQueue,j=_!==null?_.lastEffect:null;if(j!==null){var V=j.next;_=V;do{if((_.tag&h)===h){j=void 0;var Z=_.create,Ne=_.inst;j=Z(),Ne.destroy=j}_=_.next}while(_!==V)}}catch(qe){$r(y,y.return,qe)}}function th(h,y,_){try{var j=y.updateQueue,V=j!==null?j.lastEffect:null;if(V!==null){var Z=V.next;j=Z;do{if((j.tag&h)===h){var Ne=j.inst,qe=Ne.destroy;if(qe!==void 0){Ne.destroy=void 0,V=y;var lt=_,vt=qe;try{vt()}catch(Rt){$r(V,lt,Rt)}}}j=j.next}while(j!==Z)}}catch(Rt){$r(y,y.return,Rt)}}function SB(h){var y=h.updateQueue;if(y!==null){var _=h.stateNode;try{mU(y,_)}catch(j){$r(h,h.return,j)}}}function _B(h,y,_){_.props=df(h.type,h.memoizedProps),_.state=h.memoizedState;try{_.componentWillUnmount()}catch(j){$r(h,y,j)}}function gv(h,y){try{var _=h.ref;if(_!==null){switch(h.tag){case 26:case 27:case 5:var j=h.stateNode;break;case 30:j=h.stateNode;break;default:j=h.stateNode}typeof _=="function"?h.refCleanup=_(j):_.current=j}}catch(V){$r(h,y,V)}}function dd(h,y){var _=h.ref,j=h.refCleanup;if(_!==null)if(typeof j=="function")try{j()}catch(V){$r(h,y,V)}finally{h.refCleanup=null,h=h.alternate,h!=null&&(h.refCleanup=null)}else if(typeof _=="function")try{_(null)}catch(V){$r(h,y,V)}else _.current=null}function kB(h){var y=h.type,_=h.memoizedProps,j=h.stateNode;try{e:switch(y){case"button":case"input":case"select":case"textarea":_.autoFocus&&j.focus();break e;case"img":_.src?j.src=_.src:_.srcSet&&(j.srcset=_.srcSet)}}catch(V){$r(h,h.return,V)}}function Ij(h,y,_){try{var j=h.stateNode;Ede(j,h.type,_,y),j[Jt]=y}catch(V){$r(h,h.return,V)}}function NB(h){return h.tag===5||h.tag===3||h.tag===26||h.tag===27&&lh(h.type)||h.tag===4}function Oj(h){e:for(;;){for(;h.sibling===null;){if(h.return===null||NB(h.return))return null;h=h.return}for(h.sibling.return=h.return,h=h.sibling;h.tag!==5&&h.tag!==6&&h.tag!==18;){if(h.tag===27&&lh(h.type)||h.flags&2||h.child===null||h.tag===4)continue e;h.child.return=h,h=h.child}if(!(h.flags&2))return h.stateNode}}function zj(h,y,_){var j=h.tag;if(j===5||j===6)h=h.stateNode,y?(_.nodeType===9?_.body:_.nodeName==="HTML"?_.ownerDocument.body:_).insertBefore(h,y):(y=_.nodeType===9?_.body:_.nodeName==="HTML"?_.ownerDocument.body:_,y.appendChild(h),_=_._reactRootContainer,_!=null||y.onclick!==null||(y.onclick=Wt));else if(j!==4&&(j===27&&lh(h.type)&&(_=h.stateNode,y=null),h=h.child,h!==null))for(zj(h,y,_),h=h.sibling;h!==null;)zj(h,y,_),h=h.sibling}function N_(h,y,_){var j=h.tag;if(j===5||j===6)h=h.stateNode,y?_.insertBefore(h,y):_.appendChild(h);else if(j!==4&&(j===27&&lh(h.type)&&(_=h.stateNode),h=h.child,h!==null))for(N_(h,y,_),h=h.sibling;h!==null;)N_(h,y,_),h=h.sibling}function CB(h){var y=h.stateNode,_=h.memoizedProps;try{for(var j=h.type,V=y.attributes;V.length;)y.removeAttributeNode(V[0]);ms(y,j,_),y[jt]=h,y[Jt]=_}catch(Z){$r(h,h.return,Z)}}var bu=!1,pi=!1,Uj=!1,PB=typeof WeakSet=="function"?WeakSet:Set,Hi=null;function ude(h,y){if(h=h.containerInfo,oM=G_,h=YS(h),DA(h)){if("selectionStart"in h)var _={start:h.selectionStart,end:h.selectionEnd};else e:{_=(_=h.ownerDocument)&&_.defaultView||window;var j=_.getSelection&&_.getSelection();if(j&&j.rangeCount!==0){_=j.anchorNode;var V=j.anchorOffset,Z=j.focusNode;j=j.focusOffset;try{_.nodeType,Z.nodeType}catch{_=null;break e}var Ne=0,qe=-1,lt=-1,vt=0,Rt=0,Ut=h,kt=null;t:for(;;){for(var At;Ut!==_||V!==0&&Ut.nodeType!==3||(qe=Ne+V),Ut!==Z||j!==0&&Ut.nodeType!==3||(lt=Ne+j),Ut.nodeType===3&&(Ne+=Ut.nodeValue.length),(At=Ut.firstChild)!==null;)kt=Ut,Ut=At;for(;;){if(Ut===h)break t;if(kt===_&&++vt===V&&(qe=Ne),kt===Z&&++Rt===j&&(lt=Ne),(At=Ut.nextSibling)!==null)break;Ut=kt,kt=Ut.parentNode}Ut=At}_=qe===-1||lt===-1?null:{start:qe,end:lt}}else _=null}_=_||{start:0,end:0}}else _=null;for(lM={focusedElem:h,selectionRange:_},G_=!1,Hi=y;Hi!==null;)if(y=Hi,h=y.child,(y.subtreeFlags&1028)!==0&&h!==null)h.return=y,Hi=h;else for(;Hi!==null;){switch(y=Hi,Z=y.alternate,h=y.flags,y.tag){case 0:if((h&4)!==0&&(h=y.updateQueue,h=h!==null?h.events:null,h!==null))for(_=0;_<h.length;_++)V=h[_],V.ref.impl=V.nextImpl;break;case 11:case 15:break;case 1:if((h&1024)!==0&&Z!==null){h=void 0,_=y,V=Z.memoizedProps,Z=Z.memoizedState,j=_.stateNode;try{var bn=df(_.type,V);h=j.getSnapshotBeforeUpdate(bn,Z),j.__reactInternalSnapshotBeforeUpdate=h}catch(In){$r(_,_.return,In)}}break;case 3:if((h&1024)!==0){if(h=y.stateNode.containerInfo,_=h.nodeType,_===9)uM(h);else if(_===1)switch(h.nodeName){case"HEAD":case"HTML":case"BODY":uM(h);break;default:h.textContent=""}}break;case 5:case 26:case 27:case 6:case 4:case 17:break;default:if((h&1024)!==0)throw Error(r(163))}if(h=y.sibling,h!==null){h.return=y.return,Hi=h;break}Hi=y.return}}function TB(h,y,_){var j=_.flags;switch(_.tag){case 0:case 11:case 15:yu(h,_),j&4&&fv(5,_);break;case 1:if(yu(h,_),j&4)if(h=_.stateNode,y===null)try{h.componentDidMount()}catch(Ne){$r(_,_.return,Ne)}else{var V=df(_.type,y.memoizedProps);y=y.memoizedState;try{h.componentDidUpdate(V,y,h.__reactInternalSnapshotBeforeUpdate)}catch(Ne){$r(_,_.return,Ne)}}j&64&&SB(_),j&512&&gv(_,_.return);break;case 3:if(yu(h,_),j&64&&(h=_.updateQueue,h!==null)){if(y=null,_.child!==null)switch(_.child.tag){case 27:case 5:y=_.child.stateNode;break;case 1:y=_.child.stateNode}try{mU(h,y)}catch(Ne){$r(_,_.return,Ne)}}break;case 27:y===null&&j&4&&CB(_);case 26:case 5:yu(h,_),y===null&&j&4&&kB(_),j&512&&gv(_,_.return);break;case 12:yu(h,_);break;case 31:yu(h,_),j&4&&MB(h,_);break;case 13:yu(h,_),j&4&&EB(h,_),j&64&&(h=_.memoizedState,h!==null&&(h=h.dehydrated,h!==null&&(_=vde.bind(null,_),Ude(h,_))));break;case 22:if(j=_.memoizedState!==null||bu,!j){y=y!==null&&y.memoizedState!==null||pi,V=bu;var Z=pi;bu=j,(pi=y)&&!Z?vu(h,_,(_.subtreeFlags&8772)!==0):yu(h,_),bu=V,pi=Z}break;case 30:break;default:yu(h,_)}}function AB(h){var y=h.alternate;y!==null&&(h.alternate=null,AB(y)),h.child=null,h.deletions=null,h.sibling=null,h.tag===5&&(y=h.stateNode,y!==null&&Le(y)),h.stateNode=null,h.return=null,h.dependencies=null,h.memoizedProps=null,h.memoizedState=null,h.pendingProps=null,h.stateNode=null,h.updateQueue=null}var Ca=null,ko=!1;function xu(h,y,_){for(_=_.child;_!==null;)jB(h,y,_),_=_.sibling}function jB(h,y,_){if(ze&&typeof ze.onCommitFiberUnmount=="function")try{ze.onCommitFiberUnmount(Ce,_)}catch{}switch(_.tag){case 26:pi||dd(_,y),xu(h,y,_),_.memoizedState?_.memoizedState.count--:_.stateNode&&(_=_.stateNode,_.parentNode.removeChild(_));break;case 27:pi||dd(_,y);var j=Ca,V=ko;lh(_.type)&&(Ca=_.stateNode,ko=!1),xu(h,y,_),Nv(_.stateNode),Ca=j,ko=V;break;case 5:pi||dd(_,y);case 6:if(j=Ca,V=ko,Ca=null,xu(h,y,_),Ca=j,ko=V,Ca!==null)if(ko)try{(Ca.nodeType===9?Ca.body:Ca.nodeName==="HTML"?Ca.ownerDocument.body:Ca).removeChild(_.stateNode)}catch(Z){$r(_,y,Z)}else try{Ca.removeChild(_.stateNode)}catch(Z){$r(_,y,Z)}break;case 18:Ca!==null&&(ko?(h=Ca,S8(h.nodeType===9?h.body:h.nodeName==="HTML"?h.ownerDocument.body:h,_.stateNode),Tb(h)):S8(Ca,_.stateNode));break;case 4:j=Ca,V=ko,Ca=_.stateNode.containerInfo,ko=!0,xu(h,y,_),Ca=j,ko=V;break;case 0:case 11:case 14:case 15:th(2,_,y),pi||th(4,_,y),xu(h,y,_);break;case 1:pi||(dd(_,y),j=_.stateNode,typeof j.componentWillUnmount=="function"&&_B(_,y,j)),xu(h,y,_);break;case 21:xu(h,y,_);break;case 22:pi=(j=pi)||_.memoizedState!==null,xu(h,y,_),pi=j;break;default:xu(h,y,_)}}function MB(h,y){if(y.memoizedState===null&&(h=y.alternate,h!==null&&(h=h.memoizedState,h!==null))){h=h.dehydrated;try{Tb(h)}catch(_){$r(y,y.return,_)}}}function EB(h,y){if(y.memoizedState===null&&(h=y.alternate,h!==null&&(h=h.memoizedState,h!==null&&(h=h.dehydrated,h!==null))))try{Tb(h)}catch(_){$r(y,y.return,_)}}function mde(h){switch(h.tag){case 31:case 13:case 19:var y=h.stateNode;return y===null&&(y=h.stateNode=new PB),y;case 22:return h=h.stateNode,y=h._retryCache,y===null&&(y=h._retryCache=new PB),y;default:throw Error(r(435,h.tag))}}function C_(h,y){var _=mde(h);y.forEach(function(j){if(!_.has(j)){_.add(j);var V=wde.bind(null,h,j);j.then(V,V)}})}function No(h,y){var _=y.deletions;if(_!==null)for(var j=0;j<_.length;j++){var V=_[j],Z=h,Ne=y,qe=Ne;e:for(;qe!==null;){switch(qe.tag){case 27:if(lh(qe.type)){Ca=qe.stateNode,ko=!1;break e}break;case 5:Ca=qe.stateNode,ko=!1;break e;case 3:case 4:Ca=qe.stateNode.containerInfo,ko=!0;break e}qe=qe.return}if(Ca===null)throw Error(r(160));jB(Z,Ne,V),Ca=null,ko=!1,Z=V.alternate,Z!==null&&(Z.return=null),V.return=null}if(y.subtreeFlags&13886)for(y=y.child;y!==null;)DB(y,h),y=y.sibling}var Nc=null;function DB(h,y){var _=h.alternate,j=h.flags;switch(h.tag){case 0:case 11:case 14:case 15:No(y,h),Co(h),j&4&&(th(3,h,h.return),fv(3,h),th(5,h,h.return));break;case 1:No(y,h),Co(h),j&512&&(pi||_===null||dd(_,_.return)),j&64&&bu&&(h=h.updateQueue,h!==null&&(j=h.callbacks,j!==null&&(_=h.shared.hiddenCallbacks,h.shared.hiddenCallbacks=_===null?j:_.concat(j))));break;case 26:var V=Nc;if(No(y,h),Co(h),j&512&&(pi||_===null||dd(_,_.return)),j&4){var Z=_!==null?_.memoizedState:null;if(j=h.memoizedState,_===null)if(j===null)if(h.stateNode===null){e:{j=h.type,_=h.memoizedProps,V=V.ownerDocument||V;t:switch(j){case"title":Z=V.getElementsByTagName("title")[0],(!Z||Z[Ze]||Z[jt]||Z.namespaceURI==="http://www.w3.org/2000/svg"||Z.hasAttribute("itemprop"))&&(Z=V.createElement(j),V.head.insertBefore(Z,V.querySelector("head > title"))),ms(Z,j,_),Z[jt]=h,nt(Z),j=Z;break e;case"link":var Ne=D8("link","href",V).get(j+(_.href||""));if(Ne){for(var qe=0;qe<Ne.length;qe++)if(Z=Ne[qe],Z.getAttribute("href")===(_.href==null||_.href===""?null:_.href)&&Z.getAttribute("rel")===(_.rel==null?null:_.rel)&&Z.getAttribute("title")===(_.title==null?null:_.title)&&Z.getAttribute("crossorigin")===(_.crossOrigin==null?null:_.crossOrigin)){Ne.splice(qe,1);break t}}Z=V.createElement(j),ms(Z,j,_),V.head.appendChild(Z);break;case"meta":if(Ne=D8("meta","content",V).get(j+(_.content||""))){for(qe=0;qe<Ne.length;qe++)if(Z=Ne[qe],Z.getAttribute("content")===(_.content==null?null:""+_.content)&&Z.getAttribute("name")===(_.name==null?null:_.name)&&Z.getAttribute("property")===(_.property==null?null:_.property)&&Z.getAttribute("http-equiv")===(_.httpEquiv==null?null:_.httpEquiv)&&Z.getAttribute("charset")===(_.charSet==null?null:_.charSet)){Ne.splice(qe,1);break t}}Z=V.createElement(j),ms(Z,j,_),V.head.appendChild(Z);break;default:throw Error(r(468,j))}Z[jt]=h,nt(Z),j=Z}h.stateNode=j}else F8(V,h.type,h.stateNode);else h.stateNode=E8(V,j,h.memoizedProps);else Z!==j?(Z===null?_.stateNode!==null&&(_=_.stateNode,_.parentNode.removeChild(_)):Z.count--,j===null?F8(V,h.type,h.stateNode):E8(V,j,h.memoizedProps)):j===null&&h.stateNode!==null&&Ij(h,h.memoizedProps,_.memoizedProps)}break;case 27:No(y,h),Co(h),j&512&&(pi||_===null||dd(_,_.return)),_!==null&&j&4&&Ij(h,h.memoizedProps,_.memoizedProps);break;case 5:if(No(y,h),Co(h),j&512&&(pi||_===null||dd(_,_.return)),h.flags&32){V=h.stateNode;try{or(V,"")}catch(bn){$r(h,h.return,bn)}}j&4&&h.stateNode!=null&&(V=h.memoizedProps,Ij(h,V,_!==null?_.memoizedProps:V)),j&1024&&(Uj=!0);break;case 6:if(No(y,h),Co(h),j&4){if(h.stateNode===null)throw Error(r(162));j=h.memoizedProps,_=h.stateNode;try{_.nodeValue=j}catch(bn){$r(h,h.return,bn)}}break;case 3:if(H_=null,V=Nc,Nc=U_(y.containerInfo),No(y,h),Nc=V,Co(h),j&4&&_!==null&&_.memoizedState.isDehydrated)try{Tb(y.containerInfo)}catch(bn){$r(h,h.return,bn)}Uj&&(Uj=!1,FB(h));break;case 4:j=Nc,Nc=U_(h.stateNode.containerInfo),No(y,h),Co(h),Nc=j;break;case 12:No(y,h),Co(h);break;case 31:No(y,h),Co(h),j&4&&(j=h.updateQueue,j!==null&&(h.updateQueue=null,C_(h,j)));break;case 13:No(y,h),Co(h),h.child.flags&8192&&h.memoizedState!==null!=(_!==null&&_.memoizedState!==null)&&(T_=L()),j&4&&(j=h.updateQueue,j!==null&&(h.updateQueue=null,C_(h,j)));break;case 22:V=h.memoizedState!==null;var lt=_!==null&&_.memoizedState!==null,vt=bu,Rt=pi;if(bu=vt||V,pi=Rt||lt,No(y,h),pi=Rt,bu=vt,Co(h),j&8192)e:for(y=h.stateNode,y._visibility=V?y._visibility&-2:y._visibility|1,V&&(_===null||lt||bu||pi||uf(h)),_=null,y=h;;){if(y.tag===5||y.tag===26){if(_===null){lt=_=y;try{if(Z=lt.stateNode,V)Ne=Z.style,typeof Ne.setProperty=="function"?Ne.setProperty("display","none","important"):Ne.display="none";else{qe=lt.stateNode;var Ut=lt.memoizedProps.style,kt=Ut!=null&&Ut.hasOwnProperty("display")?Ut.display:null;qe.style.display=kt==null||typeof kt=="boolean"?"":(""+kt).trim()}}catch(bn){$r(lt,lt.return,bn)}}}else if(y.tag===6){if(_===null){lt=y;try{lt.stateNode.nodeValue=V?"":lt.memoizedProps}catch(bn){$r(lt,lt.return,bn)}}}else if(y.tag===18){if(_===null){lt=y;try{var At=lt.stateNode;V?_8(At,!0):_8(lt.stateNode,!1)}catch(bn){$r(lt,lt.return,bn)}}}else if((y.tag!==22&&y.tag!==23||y.memoizedState===null||y===h)&&y.child!==null){y.child.return=y,y=y.child;continue}if(y===h)break e;for(;y.sibling===null;){if(y.return===null||y.return===h)break e;_===y&&(_=null),y=y.return}_===y&&(_=null),y.sibling.return=y.return,y=y.sibling}j&4&&(j=h.updateQueue,j!==null&&(_=j.retryQueue,_!==null&&(j.retryQueue=null,C_(h,_))));break;case 19:No(y,h),Co(h),j&4&&(j=h.updateQueue,j!==null&&(h.updateQueue=null,C_(h,j)));break;case 30:break;case 21:break;default:No(y,h),Co(h)}}function Co(h){var y=h.flags;if(y&2){try{for(var _,j=h.return;j!==null;){if(NB(j)){_=j;break}j=j.return}if(_==null)throw Error(r(160));switch(_.tag){case 27:var V=_.stateNode,Z=Oj(h);N_(h,Z,V);break;case 5:var Ne=_.stateNode;_.flags&32&&(or(Ne,""),_.flags&=-33);var qe=Oj(h);N_(h,qe,Ne);break;case 3:case 4:var lt=_.stateNode.containerInfo,vt=Oj(h);zj(h,vt,lt);break;default:throw Error(r(161))}}catch(Rt){$r(h,h.return,Rt)}h.flags&=-3}y&4096&&(h.flags&=-4097)}function FB(h){if(h.subtreeFlags&1024)for(h=h.child;h!==null;){var y=h;FB(y),y.tag===5&&y.flags&1024&&y.stateNode.reset(),h=h.sibling}}function yu(h,y){if(y.subtreeFlags&8772)for(y=y.child;y!==null;)TB(h,y.alternate,y),y=y.sibling}function uf(h){for(h=h.child;h!==null;){var y=h;switch(y.tag){case 0:case 11:case 14:case 15:th(4,y,y.return),uf(y);break;case 1:dd(y,y.return);var _=y.stateNode;typeof _.componentWillUnmount=="function"&&_B(y,y.return,_),uf(y);break;case 27:Nv(y.stateNode);case 26:case 5:dd(y,y.return),uf(y);break;case 22:y.memoizedState===null&&uf(y);break;case 30:uf(y);break;default:uf(y)}h=h.sibling}}function vu(h,y,_){for(_=_&&(y.subtreeFlags&8772)!==0,y=y.child;y!==null;){var j=y.alternate,V=h,Z=y,Ne=Z.flags;switch(Z.tag){case 0:case 11:case 15:vu(V,Z,_),fv(4,Z);break;case 1:if(vu(V,Z,_),j=Z,V=j.stateNode,typeof V.componentDidMount=="function")try{V.componentDidMount()}catch(vt){$r(j,j.return,vt)}if(j=Z,V=j.updateQueue,V!==null){var qe=j.stateNode;try{var lt=V.shared.hiddenCallbacks;if(lt!==null)for(V.shared.hiddenCallbacks=null,V=0;V<lt.length;V++)uU(lt[V],qe)}catch(vt){$r(j,j.return,vt)}}_&&Ne&64&&SB(Z),gv(Z,Z.return);break;case 27:CB(Z);case 26:case 5:vu(V,Z,_),_&&j===null&&Ne&4&&kB(Z),gv(Z,Z.return);break;case 12:vu(V,Z,_);break;case 31:vu(V,Z,_),_&&Ne&4&&MB(V,Z);break;case 13:vu(V,Z,_),_&&Ne&4&&EB(V,Z);break;case 22:Z.memoizedState===null&&vu(V,Z,_),gv(Z,Z.return);break;case 30:break;default:vu(V,Z,_)}y=y.sibling}}function Bj(h,y){var _=null;h!==null&&h.memoizedState!==null&&h.memoizedState.cachePool!==null&&(_=h.memoizedState.cachePool.pool),h=null,y.memoizedState!==null&&y.memoizedState.cachePool!==null&&(h=y.memoizedState.cachePool.pool),h!==_&&(h!=null&&h.refCount++,_!=null&&nv(_))}function Hj(h,y){h=null,y.alternate!==null&&(h=y.alternate.memoizedState.cache),y=y.memoizedState.cache,y!==h&&(y.refCount++,h!=null&&nv(h))}function Cc(h,y,_,j){if(y.subtreeFlags&10256)for(y=y.child;y!==null;)RB(h,y,_,j),y=y.sibling}function RB(h,y,_,j){var V=y.flags;switch(y.tag){case 0:case 11:case 15:Cc(h,y,_,j),V&2048&&fv(9,y);break;case 1:Cc(h,y,_,j);break;case 3:Cc(h,y,_,j),V&2048&&(h=null,y.alternate!==null&&(h=y.alternate.memoizedState.cache),y=y.memoizedState.cache,y!==h&&(y.refCount++,h!=null&&nv(h)));break;case 12:if(V&2048){Cc(h,y,_,j),h=y.stateNode;try{var Z=y.memoizedProps,Ne=Z.id,qe=Z.onPostCommit;typeof qe=="function"&&qe(Ne,y.alternate===null?"mount":"update",h.passiveEffectDuration,-0)}catch(lt){$r(y,y.return,lt)}}else Cc(h,y,_,j);break;case 31:Cc(h,y,_,j);break;case 13:Cc(h,y,_,j);break;case 23:break;case 22:Z=y.stateNode,Ne=y.alternate,y.memoizedState!==null?Z._visibility&2?Cc(h,y,_,j):bv(h,y):Z._visibility&2?Cc(h,y,_,j):(Z._visibility|=2,bb(h,y,_,j,(y.subtreeFlags&10256)!==0||!1)),V&2048&&Bj(Ne,y);break;case 24:Cc(h,y,_,j),V&2048&&Hj(y.alternate,y);break;default:Cc(h,y,_,j)}}function bb(h,y,_,j,V){for(V=V&&((y.subtreeFlags&10256)!==0||!1),y=y.child;y!==null;){var Z=h,Ne=y,qe=_,lt=j,vt=Ne.flags;switch(Ne.tag){case 0:case 11:case 15:bb(Z,Ne,qe,lt,V),fv(8,Ne);break;case 23:break;case 22:var Rt=Ne.stateNode;Ne.memoizedState!==null?Rt._visibility&2?bb(Z,Ne,qe,lt,V):bv(Z,Ne):(Rt._visibility|=2,bb(Z,Ne,qe,lt,V)),V&&vt&2048&&Bj(Ne.alternate,Ne);break;case 24:bb(Z,Ne,qe,lt,V),V&&vt&2048&&Hj(Ne.alternate,Ne);break;default:bb(Z,Ne,qe,lt,V)}y=y.sibling}}function bv(h,y){if(y.subtreeFlags&10256)for(y=y.child;y!==null;){var _=h,j=y,V=j.flags;switch(j.tag){case 22:bv(_,j),V&2048&&Bj(j.alternate,j);break;case 24:bv(_,j),V&2048&&Hj(j.alternate,j);break;default:bv(_,j)}y=y.sibling}}var xv=8192;function xb(h,y,_){if(h.subtreeFlags&xv)for(h=h.child;h!==null;)LB(h,y,_),h=h.sibling}function LB(h,y,_){switch(h.tag){case 26:xb(h,y,_),h.flags&xv&&h.memoizedState!==null&&Jde(_,Nc,h.memoizedState,h.memoizedProps);break;case 5:xb(h,y,_);break;case 3:case 4:var j=Nc;Nc=U_(h.stateNode.containerInfo),xb(h,y,_),Nc=j;break;case 22:h.memoizedState===null&&(j=h.alternate,j!==null&&j.memoizedState!==null?(j=xv,xv=16777216,xb(h,y,_),xv=j):xb(h,y,_));break;default:xb(h,y,_)}}function IB(h){var y=h.alternate;if(y!==null&&(h=y.child,h!==null)){y.child=null;do y=h.sibling,h.sibling=null,h=y;while(h!==null)}}function yv(h){var y=h.deletions;if((h.flags&16)!==0){if(y!==null)for(var _=0;_<y.length;_++){var j=y[_];Hi=j,zB(j,h)}IB(h)}if(h.subtreeFlags&10256)for(h=h.child;h!==null;)OB(h),h=h.sibling}function OB(h){switch(h.tag){case 0:case 11:case 15:yv(h),h.flags&2048&&th(9,h,h.return);break;case 3:yv(h);break;case 12:yv(h);break;case 22:var y=h.stateNode;h.memoizedState!==null&&y._visibility&2&&(h.return===null||h.return.tag!==13)?(y._visibility&=-3,P_(h)):yv(h);break;default:yv(h)}}function P_(h){var y=h.deletions;if((h.flags&16)!==0){if(y!==null)for(var _=0;_<y.length;_++){var j=y[_];Hi=j,zB(j,h)}IB(h)}for(h=h.child;h!==null;){switch(y=h,y.tag){case 0:case 11:case 15:th(8,y,y.return),P_(y);break;case 22:_=y.stateNode,_._visibility&2&&(_._visibility&=-3,P_(y));break;default:P_(y)}h=h.sibling}}function zB(h,y){for(;Hi!==null;){var _=Hi;switch(_.tag){case 0:case 11:case 15:th(8,_,y);break;case 23:case 22:if(_.memoizedState!==null&&_.memoizedState.cachePool!==null){var j=_.memoizedState.cachePool.pool;j!=null&&j.refCount++}break;case 24:nv(_.memoizedState.cache)}if(j=_.child,j!==null)j.return=_,Hi=j;else e:for(_=h;Hi!==null;){j=Hi;var V=j.sibling,Z=j.return;if(AB(j),j===_){Hi=null;break e}if(V!==null){V.return=Z,Hi=V;break e}Hi=Z}}}var hde={getCacheForType:function(h){var y=ds(ui),_=y.data.get(h);return _===void 0&&(_=h(),y.data.set(h,_)),_},cacheSignal:function(){return ds(ui).controller.signal}},pde=typeof WeakMap=="function"?WeakMap:Map,Lr=0,oa=null,hr=null,yr=0,qr=0,Qo=null,nh=!1,yb=!1,qj=!1,wu=0,Va=0,rh=0,mf=0,$j=0,Jo=0,vb=0,vv=null,Po=null,Vj=!1,T_=0,UB=0,A_=1/0,j_=null,ah=null,Ni=0,ih=null,wb=null,Su=0,Gj=0,Wj=null,BB=null,wv=0,Kj=null;function Zo(){return(Lr&2)!==0&&yr!==0?yr&-yr:re.T!==null?eM():an()}function HB(){if(Jo===0)if((yr&536870912)===0||Sr){var h=Pe;Pe<<=1,(Pe&3932160)===0&&(Pe=262144),Jo=h}else Jo=536870912;return h=Xo.current,h!==null&&(h.flags|=32),Jo}function To(h,y,_){(h===oa&&(qr===2||qr===9)||h.cancelPendingCommit!==null)&&(Sb(h,0),sh(h,yr,Jo,!1)),at(h,_),((Lr&2)===0||h!==oa)&&(h===oa&&((Lr&2)===0&&(mf|=_),Va===4&&sh(h,yr,Jo,!1)),ud(h))}function qB(h,y,_){if((Lr&6)!==0)throw Error(r(327));var j=!_&&(y&127)===0&&(y&h.expiredLanes)===0||Se(h,y),V=j?bde(h,y):Yj(h,y,!0),Z=j;do{if(V===0){yb&&!j&&sh(h,y,0,!1);break}else{if(_=h.current.alternate,Z&&!fde(_)){V=Yj(h,y,!1),Z=!1;continue}if(V===2){if(Z=y,h.errorRecoveryDisabledLanes&Z)var Ne=0;else Ne=h.pendingLanes&-536870913,Ne=Ne!==0?Ne:Ne&536870912?536870912:0;if(Ne!==0){y=Ne;e:{var qe=h;V=vv;var lt=qe.current.memoizedState.isDehydrated;if(lt&&(Sb(qe,Ne).flags|=256),Ne=Yj(qe,Ne,!1),Ne!==2){if(qj&&!lt){qe.errorRecoveryDisabledLanes|=Z,mf|=Z,V=4;break e}Z=Po,Po=V,Z!==null&&(Po===null?Po=Z:Po.push.apply(Po,Z))}V=Ne}if(Z=!1,V!==2)continue}}if(V===1){Sb(h,0),sh(h,y,0,!0);break}e:{switch(j=h,Z=V,Z){case 0:case 1:throw Error(r(345));case 4:if((y&4194048)!==y)break;case 6:sh(j,y,Jo,!nh);break e;case 2:Po=null;break;case 3:case 5:break;default:throw Error(r(329))}if((y&62914560)===y&&(V=T_+300-L(),10<V)){if(sh(j,y,Jo,!nh),de(j,0,!0)!==0)break e;Su=y,j.timeoutHandle=v8($B.bind(null,j,_,Po,j_,Vj,y,Jo,mf,vb,nh,Z,"Throttled",-0,0),V);break e}$B(j,_,Po,j_,Vj,y,Jo,mf,vb,nh,Z,null,-0,0)}}break}while(!0);ud(h)}function $B(h,y,_,j,V,Z,Ne,qe,lt,vt,Rt,Ut,kt,At){if(h.timeoutHandle=-1,Ut=y.subtreeFlags,Ut&8192||(Ut&16785408)===16785408){Ut={stylesheets:null,count:0,imgCount:0,imgBytes:0,suspenseyImages:[],waitingForImages:!0,waitingForViewTransition:!1,unsuspend:Wt},LB(y,Z,Ut);var bn=(Z&62914560)===Z?T_-L():(Z&4194048)===Z?UB-L():0;if(bn=Zde(Ut,bn),bn!==null){Su=Z,h.cancelPendingCommit=bn(JB.bind(null,h,y,Z,_,j,V,Ne,qe,lt,Rt,Ut,null,kt,At)),sh(h,Z,Ne,!vt);return}}JB(h,y,Z,_,j,V,Ne,qe,lt)}function fde(h){for(var y=h;;){var _=y.tag;if((_===0||_===11||_===15)&&y.flags&16384&&(_=y.updateQueue,_!==null&&(_=_.stores,_!==null)))for(var j=0;j<_.length;j++){var V=_[j],Z=V.getSnapshot;V=V.value;try{if(!_o(Z(),V))return!1}catch{return!1}}if(_=y.child,y.subtreeFlags&16384&&_!==null)_.return=y,y=_;else{if(y===h)break;for(;y.sibling===null;){if(y.return===null||y.return===h)return!0;y=y.return}y.sibling.return=y.return,y=y.sibling}}return!0}function sh(h,y,_,j){y&=~$j,y&=~mf,h.suspendedLanes|=y,h.pingedLanes&=~y,j&&(h.warmLanes|=y),j=h.expirationTimes;for(var V=y;0<V;){var Z=31-Oe(V),Ne=1<<Z;j[Z]=-1,V&=~Ne}_!==0&&Mt(h,_,y)}function M_(){return(Lr&6)===0?(Sv(0),!1):!0}function Xj(){if(hr!==null){if(qr===0)var h=hr.return;else h=hr,uu=nf=null,uj(h),mb=null,av=0,h=hr;for(;h!==null;)wB(h.alternate,h),h=h.return;hr=null}}function Sb(h,y){var _=h.timeoutHandle;_!==-1&&(h.timeoutHandle=-1,Rde(_)),_=h.cancelPendingCommit,_!==null&&(h.cancelPendingCommit=null,_()),Su=0,Xj(),oa=h,hr=_=cu(h.current,null),yr=y,qr=0,Qo=null,nh=!1,yb=Se(h,y),qj=!1,vb=Jo=$j=mf=rh=Va=0,Po=vv=null,Vj=!1,(y&8)!==0&&(y|=y&32);var j=h.entangledLanes;if(j!==0)for(h=h.entanglements,j&=y;0<j;){var V=31-Oe(j),Z=1<<V;y|=h[V],j&=~Z}return wu=y,JS(),_}function VB(h,y){Xn=null,re.H=mv,y===ub||y===s_?(y=oU(),qr=3):y===ZA?(y=oU(),qr=4):qr=y===Pj?8:y!==null&&typeof y=="object"&&typeof y.then=="function"?6:1,Qo=y,hr===null&&(Va=1,v_(h,Al(y,h.current)))}function GB(){var h=Xo.current;return h===null?!0:(yr&4194048)===yr?Dl===null:(yr&62914560)===yr||(yr&536870912)!==0?h===Dl:!1}function WB(){var h=re.H;return re.H=mv,h===null?mv:h}function KB(){var h=re.A;return re.A=hde,h}function E_(){Va=4,nh||(yr&4194048)!==yr&&Xo.current!==null||(yb=!0),(rh&134217727)===0&&(mf&134217727)===0||oa===null||sh(oa,yr,Jo,!1)}function Yj(h,y,_){var j=Lr;Lr|=2;var V=WB(),Z=KB();(oa!==h||yr!==y)&&(j_=null,Sb(h,y)),y=!1;var Ne=Va;e:do try{if(qr!==0&&hr!==null){var qe=hr,lt=Qo;switch(qr){case 8:Xj(),Ne=6;break e;case 3:case 2:case 9:case 6:Xo.current===null&&(y=!0);var vt=qr;if(qr=0,Qo=null,_b(h,qe,lt,vt),_&&yb){Ne=0;break e}break;default:vt=qr,qr=0,Qo=null,_b(h,qe,lt,vt)}}gde(),Ne=Va;break}catch(Rt){VB(h,Rt)}while(!0);return y&&h.shellSuspendCounter++,uu=nf=null,Lr=j,re.H=V,re.A=Z,hr===null&&(oa=null,yr=0,JS()),Ne}function gde(){for(;hr!==null;)XB(hr)}function bde(h,y){var _=Lr;Lr|=2;var j=WB(),V=KB();oa!==h||yr!==y?(j_=null,A_=L()+500,Sb(h,y)):yb=Se(h,y);e:do try{if(qr!==0&&hr!==null){y=hr;var Z=Qo;t:switch(qr){case 1:qr=0,Qo=null,_b(h,y,Z,1);break;case 2:case 9:if(iU(Z)){qr=0,Qo=null,YB(y);break}y=function(){qr!==2&&qr!==9||oa!==h||(qr=7),ud(h)},Z.then(y,y);break e;case 3:qr=7;break e;case 4:qr=5;break e;case 7:iU(Z)?(qr=0,Qo=null,YB(y)):(qr=0,Qo=null,_b(h,y,Z,7));break;case 5:var Ne=null;switch(hr.tag){case 26:Ne=hr.memoizedState;case 5:case 27:var qe=hr;if(Ne?R8(Ne):qe.stateNode.complete){qr=0,Qo=null;var lt=qe.sibling;if(lt!==null)hr=lt;else{var vt=qe.return;vt!==null?(hr=vt,D_(vt)):hr=null}break t}}qr=0,Qo=null,_b(h,y,Z,5);break;case 6:qr=0,Qo=null,_b(h,y,Z,6);break;case 8:Xj(),Va=6;break e;default:throw Error(r(462))}}xde();break}catch(Rt){VB(h,Rt)}while(!0);return uu=nf=null,re.H=j,re.A=V,Lr=_,hr!==null?0:(oa=null,yr=0,JS(),Va)}function xde(){for(;hr!==null&&!me();)XB(hr)}function XB(h){var y=yB(h.alternate,h,wu);h.memoizedProps=h.pendingProps,y===null?D_(h):hr=y}function YB(h){var y=h,_=y.alternate;switch(y.tag){case 15:case 0:y=hB(_,y,y.pendingProps,y.type,void 0,yr);break;case 11:y=hB(_,y,y.pendingProps,y.type.render,y.ref,yr);break;case 5:uj(y);default:wB(_,y),y=hr=K5(y,wu),y=yB(_,y,wu)}h.memoizedProps=h.pendingProps,y===null?D_(h):hr=y}function _b(h,y,_,j){uu=nf=null,uj(y),mb=null,av=0;var V=y.return;try{if(sde(h,V,y,_,yr)){Va=1,v_(h,Al(_,h.current)),hr=null;return}}catch(Z){if(V!==null)throw hr=V,Z;Va=1,v_(h,Al(_,h.current)),hr=null;return}y.flags&32768?(Sr||j===1?h=!0:yb||(yr&536870912)!==0?h=!1:(nh=h=!0,(j===2||j===9||j===3||j===6)&&(j=Xo.current,j!==null&&j.tag===13&&(j.flags|=16384))),QB(y,h)):D_(y)}function D_(h){var y=h;do{if((y.flags&32768)!==0){QB(y,nh);return}h=y.return;var _=cde(y.alternate,y,wu);if(_!==null){hr=_;return}if(y=y.sibling,y!==null){hr=y;return}hr=y=h}while(y!==null);Va===0&&(Va=5)}function QB(h,y){do{var _=dde(h.alternate,h);if(_!==null){_.flags&=32767,hr=_;return}if(_=h.return,_!==null&&(_.flags|=32768,_.subtreeFlags=0,_.deletions=null),!y&&(h=h.sibling,h!==null)){hr=h;return}hr=h=_}while(h!==null);Va=6,hr=null}function JB(h,y,_,j,V,Z,Ne,qe,lt){h.cancelPendingCommit=null;do F_();while(Ni!==0);if((Lr&6)!==0)throw Error(r(327));if(y!==null){if(y===h.current)throw Error(r(177));if(Z=y.lanes|y.childLanes,Z|=OA,ht(h,_,Z,Ne,qe,lt),h===oa&&(hr=oa=null,yr=0),wb=y,ih=h,Su=_,Gj=Z,Wj=V,BB=j,(y.subtreeFlags&10256)!==0||(y.flags&10256)!==0?(h.callbackNode=null,h.callbackPriority=0,Sde(je,function(){return r8(),null})):(h.callbackNode=null,h.callbackPriority=0),j=(y.flags&13878)!==0,(y.subtreeFlags&13878)!==0||j){j=re.T,re.T=null,V=J.p,J.p=2,Ne=Lr,Lr|=4;try{ude(h,y,_)}finally{Lr=Ne,J.p=V,re.T=j}}Ni=1,ZB(),e8(),t8()}}function ZB(){if(Ni===1){Ni=0;var h=ih,y=wb,_=(y.flags&13878)!==0;if((y.subtreeFlags&13878)!==0||_){_=re.T,re.T=null;var j=J.p;J.p=2;var V=Lr;Lr|=4;try{DB(y,h);var Z=lM,Ne=YS(h.containerInfo),qe=Z.focusedElem,lt=Z.selectionRange;if(Ne!==qe&&qe&&qe.ownerDocument&&Jy(qe.ownerDocument.documentElement,qe)){if(lt!==null&&DA(qe)){var vt=lt.start,Rt=lt.end;if(Rt===void 0&&(Rt=vt),"selectionStart"in qe)qe.selectionStart=vt,qe.selectionEnd=Math.min(Rt,qe.value.length);else{var Ut=qe.ownerDocument||document,kt=Ut&&Ut.defaultView||window;if(kt.getSelection){var At=kt.getSelection(),bn=qe.textContent.length,In=Math.min(lt.start,bn),Qr=lt.end===void 0?In:Math.min(lt.end,bn);!At.extend&&In>Qr&&(Ne=Qr,Qr=In,In=Ne);var gt=Qy(qe,In),pt=Qy(qe,Qr);if(gt&&pt&&(At.rangeCount!==1||At.anchorNode!==gt.node||At.anchorOffset!==gt.offset||At.focusNode!==pt.node||At.focusOffset!==pt.offset)){var yt=Ut.createRange();yt.setStart(gt.node,gt.offset),At.removeAllRanges(),In>Qr?(At.addRange(yt),At.extend(pt.node,pt.offset)):(yt.setEnd(pt.node,pt.offset),At.addRange(yt))}}}}for(Ut=[],At=qe;At=At.parentNode;)At.nodeType===1&&Ut.push({element:At,left:At.scrollLeft,top:At.scrollTop});for(typeof qe.focus=="function"&&qe.focus(),qe=0;qe<Ut.length;qe++){var It=Ut[qe];It.element.scrollLeft=It.left,It.element.scrollTop=It.top}}G_=!!oM,lM=oM=null}finally{Lr=V,J.p=j,re.T=_}}h.current=y,Ni=2}}function e8(){if(Ni===2){Ni=0;var h=ih,y=wb,_=(y.flags&8772)!==0;if((y.subtreeFlags&8772)!==0||_){_=re.T,re.T=null;var j=J.p;J.p=2;var V=Lr;Lr|=4;try{TB(h,y.alternate,y)}finally{Lr=V,J.p=j,re.T=_}}Ni=3}}function t8(){if(Ni===4||Ni===3){Ni=0,H();var h=ih,y=wb,_=Su,j=BB;(y.subtreeFlags&10256)!==0||(y.flags&10256)!==0?Ni=5:(Ni=0,wb=ih=null,n8(h,h.pendingLanes));var V=h.pendingLanes;if(V===0&&(ah=null),Qt(_),y=y.stateNode,ze&&typeof ze.onCommitFiberRoot=="function")try{ze.onCommitFiberRoot(Ce,y,void 0,(y.current.flags&128)===128)}catch{}if(j!==null){y=re.T,V=J.p,J.p=2,re.T=null;try{for(var Z=h.onRecoverableError,Ne=0;Ne<j.length;Ne++){var qe=j[Ne];Z(qe.value,{componentStack:qe.stack})}}finally{re.T=y,J.p=V}}(Su&3)!==0&&F_(),ud(h),V=h.pendingLanes,(_&261930)!==0&&(V&42)!==0?h===Kj?wv++:(wv=0,Kj=h):wv=0,Sv(0)}}function n8(h,y){(h.pooledCacheLanes&=y)===0&&(y=h.pooledCache,y!=null&&(h.pooledCache=null,nv(y)))}function F_(){return ZB(),e8(),t8(),r8()}function r8(){if(Ni!==5)return!1;var h=ih,y=Gj;Gj=0;var _=Qt(Su),j=re.T,V=J.p;try{J.p=32>_?32:_,re.T=null,_=Wj,Wj=null;var Z=ih,Ne=Su;if(Ni=0,wb=ih=null,Su=0,(Lr&6)!==0)throw Error(r(331));var qe=Lr;if(Lr|=4,OB(Z.current),RB(Z,Z.current,Ne,_),Lr=qe,Sv(0,!1),ze&&typeof ze.onPostCommitFiberRoot=="function")try{ze.onPostCommitFiberRoot(Ce,Z)}catch{}return!0}finally{J.p=V,re.T=j,n8(h,y)}}function a8(h,y,_){y=Al(_,y),y=Cj(h.stateNode,y,2),h=Jm(h,y,2),h!==null&&(at(h,2),ud(h))}function $r(h,y,_){if(h.tag===3)a8(h,h,_);else for(;y!==null;){if(y.tag===3){a8(y,h,_);break}else if(y.tag===1){var j=y.stateNode;if(typeof y.type.getDerivedStateFromError=="function"||typeof j.componentDidCatch=="function"&&(ah===null||!ah.has(j))){h=Al(_,h),_=iB(2),j=Jm(y,_,2),j!==null&&(sB(_,j,y,h),at(j,2),ud(j));break}}y=y.return}}function Qj(h,y,_){var j=h.pingCache;if(j===null){j=h.pingCache=new pde;var V=new Set;j.set(y,V)}else V=j.get(y),V===void 0&&(V=new Set,j.set(y,V));V.has(_)||(qj=!0,V.add(_),h=yde.bind(null,h,y,_),y.then(h,h))}function yde(h,y,_){var j=h.pingCache;j!==null&&j.delete(y),h.pingedLanes|=h.suspendedLanes&_,h.warmLanes&=~_,oa===h&&(yr&_)===_&&(Va===4||Va===3&&(yr&62914560)===yr&&300>L()-T_?(Lr&2)===0&&Sb(h,0):$j|=_,vb===yr&&(vb=0)),ud(h)}function i8(h,y){y===0&&(y=st()),h=Zp(h,y),h!==null&&(at(h,y),ud(h))}function vde(h){var y=h.memoizedState,_=0;y!==null&&(_=y.retryLane),i8(h,_)}function wde(h,y){var _=0;switch(h.tag){case 31:case 13:var j=h.stateNode,V=h.memoizedState;V!==null&&(_=V.retryLane);break;case 19:j=h.stateNode;break;case 22:j=h.stateNode._retryCache;break;default:throw Error(r(314))}j!==null&&j.delete(y),i8(h,_)}function Sde(h,y){return ye(h,y)}var R_=null,kb=null,Jj=!1,L_=!1,Zj=!1,oh=0;function ud(h){h!==kb&&h.next===null&&(kb===null?R_=kb=h:kb=kb.next=h),L_=!0,Jj||(Jj=!0,kde())}function Sv(h,y){if(!Zj&&L_){Zj=!0;do for(var _=!1,j=R_;j!==null;){if(h!==0){var V=j.pendingLanes;if(V===0)var Z=0;else{var Ne=j.suspendedLanes,qe=j.pingedLanes;Z=(1<<31-Oe(42|h)+1)-1,Z&=V&~(Ne&~qe),Z=Z&201326741?Z&201326741|1:Z?Z|2:0}Z!==0&&(_=!0,c8(j,Z))}else Z=yr,Z=de(j,j===oa?Z:0,j.cancelPendingCommit!==null||j.timeoutHandle!==-1),(Z&3)===0||Se(j,Z)||(_=!0,c8(j,Z));j=j.next}while(_);Zj=!1}}function _de(){s8()}function s8(){L_=Jj=!1;var h=0;oh!==0&&Fde()&&(h=oh);for(var y=L(),_=null,j=R_;j!==null;){var V=j.next,Z=o8(j,y);Z===0?(j.next=null,_===null?R_=V:_.next=V,V===null&&(kb=_)):(_=j,(h!==0||(Z&3)!==0)&&(L_=!0)),j=V}Ni!==0&&Ni!==5||Sv(h),oh!==0&&(oh=0)}function o8(h,y){for(var _=h.suspendedLanes,j=h.pingedLanes,V=h.expirationTimes,Z=h.pendingLanes&-62914561;0<Z;){var Ne=31-Oe(Z),qe=1<<Ne,lt=V[Ne];lt===-1?((qe&_)===0||(qe&j)!==0)&&(V[Ne]=$e(qe,y)):lt<=y&&(h.expiredLanes|=qe),Z&=~qe}if(y=oa,_=yr,_=de(h,h===y?_:0,h.cancelPendingCommit!==null||h.timeoutHandle!==-1),j=h.callbackNode,_===0||h===y&&(qr===2||qr===9)||h.cancelPendingCommit!==null)return j!==null&&j!==null&&he(j),h.callbackNode=null,h.callbackPriority=0;if((_&3)===0||Se(h,_)){if(y=_&-_,y===h.callbackPriority)return y;switch(j!==null&&he(j),Qt(_)){case 2:case 8:_=ke;break;case 32:_=je;break;case 268435456:_=xe;break;default:_=je}return j=l8.bind(null,h),_=ye(_,j),h.callbackPriority=y,h.callbackNode=_,y}return j!==null&&j!==null&&he(j),h.callbackPriority=2,h.callbackNode=null,2}function l8(h,y){if(Ni!==0&&Ni!==5)return h.callbackNode=null,h.callbackPriority=0,null;var _=h.callbackNode;if(F_()&&h.callbackNode!==_)return null;var j=yr;return j=de(h,h===oa?j:0,h.cancelPendingCommit!==null||h.timeoutHandle!==-1),j===0?null:(qB(h,j,y),o8(h,L()),h.callbackNode!=null&&h.callbackNode===_?l8.bind(null,h):null)}function c8(h,y){if(F_())return null;qB(h,y,!0)}function kde(){Lde(function(){(Lr&6)!==0?ye(ge,_de):s8()})}function eM(){if(oh===0){var h=cb;h===0&&(h=Xe,Xe<<=1,(Xe&261888)===0&&(Xe=256)),oh=h}return oh}function d8(h){return h==null||typeof h=="symbol"||typeof h=="boolean"?null:typeof h=="function"?h:mr(""+h)}function u8(h,y){var _=y.ownerDocument.createElement("input");return _.name=y.name,_.value=y.value,h.id&&_.setAttribute("form",h.id),y.parentNode.insertBefore(_,y),h=new FormData(h),_.parentNode.removeChild(_),h}function Nde(h,y,_,j,V){if(y==="submit"&&_&&_.stateNode===V){var Z=d8((V[Jt]||null).action),Ne=j.submitter;Ne&&(y=(y=Ne[Jt]||null)?d8(y.formAction):Ne.getAttribute("formAction"),y!==null&&(Z=y,Ne=null));var qe=new Vo("action","action",null,j,V);h.push({event:qe,listeners:[{instance:null,listener:function(){if(j.defaultPrevented){if(oh!==0){var lt=Ne?u8(V,Ne):new FormData(V);vj(_,{pending:!0,data:lt,method:V.method,action:Z},null,lt)}}else typeof Z=="function"&&(qe.preventDefault(),lt=Ne?u8(V,Ne):new FormData(V),vj(_,{pending:!0,data:lt,method:V.method,action:Z},Z,lt))},currentTarget:V}]})}}for(var tM=0;tM<IA.length;tM++){var nM=IA[tM],Cde=nM.toLowerCase(),Pde=nM[0].toUpperCase()+nM.slice(1);kc(Cde,"on"+Pde)}kc(H5,"onAnimationEnd"),kc(q5,"onAnimationIteration"),kc($5,"onAnimationStart"),kc("dblclick","onDoubleClick"),kc("focusin","onFocus"),kc("focusout","onBlur"),kc(qce,"onTransitionRun"),kc($ce,"onTransitionStart"),kc(Vce,"onTransitionCancel"),kc(V5,"onTransitionEnd"),Ct("onMouseEnter",["mouseout","mouseover"]),Ct("onMouseLeave",["mouseout","mouseover"]),Ct("onPointerEnter",["pointerout","pointerover"]),Ct("onPointerLeave",["pointerout","pointerover"]),rt("onChange","change click focusin focusout input keydown keyup selectionchange".split(" ")),rt("onSelect","focusout contextmenu dragend focusin keydown keyup mousedown mouseup selectionchange".split(" ")),rt("onBeforeInput",["compositionend","keypress","textInput","paste"]),rt("onCompositionEnd","compositionend focusout keydown keypress keyup mousedown".split(" ")),rt("onCompositionStart","compositionstart focusout keydown keypress keyup mousedown".split(" ")),rt("onCompositionUpdate","compositionupdate focusout keydown keypress keyup mousedown".split(" "));var _v="abort canplay canplaythrough durationchange emptied encrypted ended error loadeddata loadedmetadata loadstart pause play playing progress ratechange resize seeked seeking stalled suspend timeupdate volumechange waiting".split(" "),Tde=new Set("beforetoggle cancel close invalid load scroll scrollend toggle".split(" ").concat(_v));function m8(h,y){y=(y&4)!==0;for(var _=0;_<h.length;_++){var j=h[_],V=j.event;j=j.listeners;e:{var Z=void 0;if(y)for(var Ne=j.length-1;0<=Ne;Ne--){var qe=j[Ne],lt=qe.instance,vt=qe.currentTarget;if(qe=qe.listener,lt!==Z&&V.isPropagationStopped())break e;Z=qe,V.currentTarget=vt;try{Z(V)}catch(Rt){QS(Rt)}V.currentTarget=null,Z=lt}else for(Ne=0;Ne<j.length;Ne++){if(qe=j[Ne],lt=qe.instance,vt=qe.currentTarget,qe=qe.listener,lt!==Z&&V.isPropagationStopped())break e;Z=qe,V.currentTarget=vt;try{Z(V)}catch(Rt){QS(Rt)}V.currentTarget=null,Z=lt}}}}function pr(h,y){var _=y[Tt];_===void 0&&(_=y[Tt]=new Set);var j=h+"__bubble";_.has(j)||(h8(y,h,2,!1),_.add(j))}function rM(h,y,_){var j=0;y&&(j|=4),h8(_,h,j,y)}var I_="_reactListening"+Math.random().toString(36).slice(2);function aM(h){if(!h[I_]){h[I_]=!0,Je.forEach(function(_){_!=="selectionchange"&&(Tde.has(_)||rM(_,!1,h),rM(_,!0,h))});var y=h.nodeType===9?h:h.ownerDocument;y===null||y[I_]||(y[I_]=!0,rM("selectionchange",!1,y))}}function h8(h,y,_,j){switch(H8(y)){case 2:var V=nue;break;case 8:V=rue;break;default:V=yM}_=V.bind(null,y,_,h),V=void 0,!zi||y!=="touchstart"&&y!=="touchmove"&&y!=="wheel"||(V=!0),j?V!==void 0?h.addEventListener(y,_,{capture:!0,passive:V}):h.addEventListener(y,_,!0):V!==void 0?h.addEventListener(y,_,{passive:V}):h.addEventListener(y,_,!1)}function iM(h,y,_,j,V){var Z=j;if((y&1)===0&&(y&2)===0&&j!==null)e:for(;;){if(j===null)return;var Ne=j.tag;if(Ne===3||Ne===4){var qe=j.stateNode.containerInfo;if(qe===V)break;if(Ne===4)for(Ne=j.return;Ne!==null;){var lt=Ne.tag;if((lt===3||lt===4)&&Ne.stateNode.containerInfo===V)return;Ne=Ne.return}for(;qe!==null;){if(Ne=dt(qe),Ne===null)return;if(lt=Ne.tag,lt===5||lt===6||lt===26||lt===27){j=Z=Ne;continue e}qe=qe.parentNode}}j=j.return}$p(function(){var vt=Z,Rt=vo(_),Ut=[];e:{var kt=G5.get(h);if(kt!==void 0){var At=Vo,bn=h;switch(h){case"keypress":if(ru(_)===0)break e;case"keydown":case"keyup":At=eb;break;case"focusin":bn="focus",At=ci;break;case"focusout":bn="blur",At=ci;break;case"beforeblur":case"afterblur":At=ci;break;case"click":if(_.button===2)break e;case"auxclick":case"dblclick":case"mousedown":case"mousemove":case"mouseup":case"mouseout":case"mouseover":case"contextmenu":At=Om;break;case"drag":case"dragend":case"dragenter":case"dragexit":case"dragleave":case"dragover":case"dragstart":case"drop":At=od;break;case"touchcancel":case"touchend":case"touchmove":case"touchstart":At=Sc;break;case H5:case q5:case $5:At=zm;break;case V5:At=qm;break;case"scroll":case"scrollend":At=Sl;break;case"wheel":At=$m;break;case"copy":case"cut":case"paste":At=su;break;case"gotpointercapture":case"lostpointercapture":case"pointercancel":case"pointerdown":case"pointermove":case"pointerout":case"pointerover":case"pointerup":At=Go;break;case"toggle":case"beforetoggle":At=Et}var In=(y&4)!==0,Qr=!In&&(h==="scroll"||h==="scrollend"),gt=In?kt!==null?kt+"Capture":null:kt;In=[];for(var pt=vt,yt;pt!==null;){var It=pt;if(yt=It.stateNode,It=It.tag,It!==5&&It!==26&&It!==27||yt===null||gt===null||(It=ls(pt,gt),It!=null&&In.push(kv(pt,It,yt))),Qr)break;pt=pt.return}0<In.length&&(kt=new At(kt,bn,null,_,Rt),Ut.push({event:kt,listeners:In}))}}if((y&7)===0){e:{if(kt=h==="mouseover"||h==="pointerover",At=h==="mouseout"||h==="pointerout",kt&&_!==Ms&&(bn=_.relatedTarget||_.fromElement)&&(dt(bn)||bn[zt]))break e;if((At||kt)&&(kt=Rt.window===Rt?Rt:(kt=Rt.ownerDocument)?kt.defaultView||kt.parentWindow:window,At?(bn=_.relatedTarget||_.toElement,At=vt,bn=bn?dt(bn):null,bn!==null&&(Qr=s(bn),In=bn.tag,bn!==Qr||In!==5&&In!==27&&In!==6)&&(bn=null)):(At=null,bn=vt),At!==bn)){if(In=Om,It="onMouseLeave",gt="onMouseEnter",pt="mouse",(h==="pointerout"||h==="pointerover")&&(In=Go,It="onPointerLeave",gt="onPointerEnter",pt="pointer"),Qr=At==null?kt:We(At),yt=bn==null?kt:We(bn),kt=new In(It,pt+"leave",At,_,Rt),kt.target=Qr,kt.relatedTarget=yt,It=null,dt(Rt)===vt&&(In=new In(gt,pt+"enter",bn,_,Rt),In.target=yt,In.relatedTarget=Qr,It=In),Qr=It,At&&bn)t:{for(In=Ade,gt=At,pt=bn,yt=0,It=gt;It;It=In(It))yt++;It=0;for(var An=pt;An;An=In(An))It++;for(;0<yt-It;)gt=In(gt),yt--;for(;0<It-yt;)pt=In(pt),It--;for(;yt--;){if(gt===pt||pt!==null&&gt===pt.alternate){In=gt;break t}gt=In(gt),pt=In(pt)}In=null}else In=null;At!==null&&p8(Ut,kt,At,In,!1),bn!==null&&Qr!==null&&p8(Ut,Qr,bn,In,!0)}}e:{if(kt=vt?We(vt):window,At=kt.nodeName&&kt.nodeName.toLowerCase(),At==="select"||At==="input"&&kt.type==="file")var Er=Ui;else if(Na(kt))if(Pl)Er=Xp;else{Er=ri;var vn=Yy}else At=kt.nodeName,!At||At.toLowerCase()!=="input"||kt.type!=="checkbox"&&kt.type!=="radio"?vt&&yl(vt.elementType)&&(Er=Ui):Er=lu;if(Er&&(Er=Er(h,vt))){ni(Ut,Er,_,Rt);break e}vn&&vn(h,kt,vt),h==="focusout"&&vt&&kt.type==="number"&&vt.memoizedProps.value!=null&&Br(kt,"number",kt.value)}switch(vn=vt?We(vt):window,h){case"focusin":(Na(vn)||vn.contentEditable==="true")&&(tb=vn,FA=vt,Zy=null);break;case"focusout":Zy=FA=tb=null;break;case"mousedown":RA=!0;break;case"contextmenu":case"mouseup":case"dragend":RA=!1,U5(Ut,_,Rt);break;case"selectionchange":if(Hce)break;case"keydown":case"keyup":U5(Ut,_,Rt)}var Qn;if(kn)e:{switch(h){case"compositionstart":var vr="onCompositionStart";break e;case"compositionend":vr="onCompositionEnd";break e;case"compositionupdate":vr="onCompositionUpdate";break e}vr=void 0}else Or?xr(h,_)&&(vr="onCompositionEnd"):h==="keydown"&&_.keyCode===229&&(vr="onCompositionStart");vr&&(Xt&&_.locale!=="ko"&&(Or||vr!=="onCompositionStart"?vr==="onCompositionEnd"&&Or&&(Qn=Im()):(wo=Rt,ha="value"in wo?wo.value:wo.textContent,Or=!0)),vn=O_(vt,vr),0<vn.length&&(vr=new Nl(vr,h,null,_,Rt),Ut.push({event:vr,listeners:vn}),Qn?vr.data=Qn:(Qn=lr(_),Qn!==null&&(vr.data=Qn)))),(Qn=Dt?La(h,_):un(h,_))&&(vr=O_(vt,"onBeforeInput"),0<vr.length&&(vn=new Nl("onBeforeInput","beforeinput",null,_,Rt),Ut.push({event:vn,listeners:vr}),vn.data=Qn)),Nde(Ut,h,vt,_,Rt)}m8(Ut,y)})}function kv(h,y,_){return{instance:h,listener:y,currentTarget:_}}function O_(h,y){for(var _=y+"Capture",j=[];h!==null;){var V=h,Z=V.stateNode;if(V=V.tag,V!==5&&V!==26&&V!==27||Z===null||(V=ls(h,_),V!=null&&j.unshift(kv(h,V,Z)),V=ls(h,y),V!=null&&j.push(kv(h,V,Z))),h.tag===3)return j;h=h.return}return[]}function Ade(h){if(h===null)return null;do h=h.return;while(h&&h.tag!==5&&h.tag!==27);return h||null}function p8(h,y,_,j,V){for(var Z=y._reactName,Ne=[];_!==null&&_!==j;){var qe=_,lt=qe.alternate,vt=qe.stateNode;if(qe=qe.tag,lt!==null&&lt===j)break;qe!==5&&qe!==26&&qe!==27||vt===null||(lt=vt,V?(vt=ls(_,Z),vt!=null&&Ne.unshift(kv(_,vt,lt))):V||(vt=ls(_,Z),vt!=null&&Ne.push(kv(_,vt,lt)))),_=_.return}Ne.length!==0&&h.push({event:y,listeners:Ne})}var jde=/\r\n?/g,Mde=/\u0000|\uFFFD/g;function f8(h){return(typeof h=="string"?h:""+h).replace(jde,`
-`).replace(Mde,"")}function g8(h,y){return y=f8(y),f8(h)===y}function Yr(h,y,_,j,V,Z){switch(_){case"children":typeof j=="string"?y==="body"||y==="textarea"&&j===""||or(h,j):(typeof j=="number"||typeof j=="bigint")&&y!=="body"&&or(h,""+j);break;case"className":Ht(h,"class",j);break;case"tabIndex":Ht(h,"tabindex",j);break;case"dir":case"role":case"viewBox":case"width":case"height":Ht(h,_,j);break;case"style":yc(h,j,Z);break;case"data":if(y!=="object"){Ht(h,"data",j);break}case"src":case"href":if(j===""&&(y!=="a"||_!=="href")){h.removeAttribute(_);break}if(j==null||typeof j=="function"||typeof j=="symbol"||typeof j=="boolean"){h.removeAttribute(_);break}j=mr(""+j),h.setAttribute(_,j);break;case"action":case"formAction":if(typeof j=="function"){h.setAttribute(_,"javascript:throw new Error('A React form was unexpectedly submitted. If you called form.submit() manually, consider using form.requestSubmit() instead. If you\\'re trying to use event.stopPropagation() in a submit event handler, consider also calling event.preventDefault().')");break}else typeof Z=="function"&&(_==="formAction"?(y!=="input"&&Yr(h,y,"name",V.name,V,null),Yr(h,y,"formEncType",V.formEncType,V,null),Yr(h,y,"formMethod",V.formMethod,V,null),Yr(h,y,"formTarget",V.formTarget,V,null)):(Yr(h,y,"encType",V.encType,V,null),Yr(h,y,"method",V.method,V,null),Yr(h,y,"target",V.target,V,null)));if(j==null||typeof j=="symbol"||typeof j=="boolean"){h.removeAttribute(_);break}j=mr(""+j),h.setAttribute(_,j);break;case"onClick":j!=null&&(h.onclick=Wt);break;case"onScroll":j!=null&&pr("scroll",h);break;case"onScrollEnd":j!=null&&pr("scrollend",h);break;case"dangerouslySetInnerHTML":if(j!=null){if(typeof j!="object"||!("__html"in j))throw Error(r(61));if(_=j.__html,_!=null){if(V.children!=null)throw Error(r(60));h.innerHTML=_}}break;case"multiple":h.multiple=j&&typeof j!="function"&&typeof j!="symbol";break;case"muted":h.muted=j&&typeof j!="function"&&typeof j!="symbol";break;case"suppressContentEditableWarning":case"suppressHydrationWarning":case"defaultValue":case"defaultChecked":case"innerHTML":case"ref":break;case"autoFocus":break;case"xlinkHref":if(j==null||typeof j=="function"||typeof j=="boolean"||typeof j=="symbol"){h.removeAttribute("xlink:href");break}_=mr(""+j),h.setAttributeNS("http://www.w3.org/1999/xlink","xlink:href",_);break;case"contentEditable":case"spellCheck":case"draggable":case"value":case"autoReverse":case"externalResourcesRequired":case"focusable":case"preserveAlpha":j!=null&&typeof j!="function"&&typeof j!="symbol"?h.setAttribute(_,""+j):h.removeAttribute(_);break;case"inert":case"allowFullScreen":case"async":case"autoPlay":case"controls":case"default":case"defer":case"disabled":case"disablePictureInPicture":case"disableRemotePlayback":case"formNoValidate":case"hidden":case"loop":case"noModule":case"noValidate":case"open":case"playsInline":case"readOnly":case"required":case"reversed":case"scoped":case"seamless":case"itemScope":j&&typeof j!="function"&&typeof j!="symbol"?h.setAttribute(_,""):h.removeAttribute(_);break;case"capture":case"download":j===!0?h.setAttribute(_,""):j!==!1&&j!=null&&typeof j!="function"&&typeof j!="symbol"?h.setAttribute(_,j):h.removeAttribute(_);break;case"cols":case"rows":case"size":case"span":j!=null&&typeof j!="function"&&typeof j!="symbol"&&!isNaN(j)&&1<=j?h.setAttribute(_,j):h.removeAttribute(_);break;case"rowSpan":case"start":j==null||typeof j=="function"||typeof j=="symbol"||isNaN(j)?h.removeAttribute(_):h.setAttribute(_,j);break;case"popover":pr("beforetoggle",h),pr("toggle",h),Ke(h,"popover",j);break;case"xlinkActuate":Yt(h,"http://www.w3.org/1999/xlink","xlink:actuate",j);break;case"xlinkArcrole":Yt(h,"http://www.w3.org/1999/xlink","xlink:arcrole",j);break;case"xlinkRole":Yt(h,"http://www.w3.org/1999/xlink","xlink:role",j);break;case"xlinkShow":Yt(h,"http://www.w3.org/1999/xlink","xlink:show",j);break;case"xlinkTitle":Yt(h,"http://www.w3.org/1999/xlink","xlink:title",j);break;case"xlinkType":Yt(h,"http://www.w3.org/1999/xlink","xlink:type",j);break;case"xmlBase":Yt(h,"http://www.w3.org/XML/1998/namespace","xml:base",j);break;case"xmlLang":Yt(h,"http://www.w3.org/XML/1998/namespace","xml:lang",j);break;case"xmlSpace":Yt(h,"http://www.w3.org/XML/1998/namespace","xml:space",j);break;case"is":Ke(h,"is",j);break;case"innerText":case"textContent":break;default:(!(2<_.length)||_[0]!=="o"&&_[0]!=="O"||_[1]!=="n"&&_[1]!=="N")&&(_=Pt.get(_)||_,Ke(h,_,j))}}function sM(h,y,_,j,V,Z){switch(_){case"style":yc(h,j,Z);break;case"dangerouslySetInnerHTML":if(j!=null){if(typeof j!="object"||!("__html"in j))throw Error(r(61));if(_=j.__html,_!=null){if(V.children!=null)throw Error(r(60));h.innerHTML=_}}break;case"children":typeof j=="string"?or(h,j):(typeof j=="number"||typeof j=="bigint")&&or(h,""+j);break;case"onScroll":j!=null&&pr("scroll",h);break;case"onScrollEnd":j!=null&&pr("scrollend",h);break;case"onClick":j!=null&&(h.onclick=Wt);break;case"suppressContentEditableWarning":case"suppressHydrationWarning":case"innerHTML":case"ref":break;case"innerText":case"textContent":break;default:if(!Ue.hasOwnProperty(_))e:{if(_[0]==="o"&&_[1]==="n"&&(V=_.endsWith("Capture"),y=_.slice(2,V?_.length-7:void 0),Z=h[Jt]||null,Z=Z!=null?Z[_]:null,typeof Z=="function"&&h.removeEventListener(y,Z,V),typeof j=="function")){typeof Z!="function"&&Z!==null&&(_ in h?h[_]=null:h.hasAttribute(_)&&h.removeAttribute(_)),h.addEventListener(y,j,V);break e}_ in h?h[_]=j:j===!0?h.setAttribute(_,""):Ke(h,_,j)}}}function ms(h,y,_){switch(y){case"div":case"span":case"svg":case"path":case"a":case"g":case"p":case"li":break;case"img":pr("error",h),pr("load",h);var j=!1,V=!1,Z;for(Z in _)if(_.hasOwnProperty(Z)){var Ne=_[Z];if(Ne!=null)switch(Z){case"src":j=!0;break;case"srcSet":V=!0;break;case"children":case"dangerouslySetInnerHTML":throw Error(r(137,y));default:Yr(h,y,Z,Ne,_,null)}}V&&Yr(h,y,"srcSet",_.srcSet,_,null),j&&Yr(h,y,"src",_.src,_,null);return;case"input":pr("invalid",h);var qe=Z=Ne=V=null,lt=null,vt=null;for(j in _)if(_.hasOwnProperty(j)){var Rt=_[j];if(Rt!=null)switch(j){case"name":V=Rt;break;case"type":Ne=Rt;break;case"checked":lt=Rt;break;case"defaultChecked":vt=Rt;break;case"value":Z=Rt;break;case"defaultValue":qe=Rt;break;case"children":case"dangerouslySetInnerHTML":if(Rt!=null)throw Error(r(137,y));break;default:Yr(h,y,j,Rt,_,null)}}$n(h,Z,qe,lt,vt,Ne,V,!1);return;case"select":pr("invalid",h),j=Ne=Z=null;for(V in _)if(_.hasOwnProperty(V)&&(qe=_[V],qe!=null))switch(V){case"value":Z=qe;break;case"defaultValue":Ne=qe;break;case"multiple":j=qe;default:Yr(h,y,V,qe,_,null)}y=Z,_=Ne,h.multiple=!!j,y!=null?Kr(h,!!j,y,!1):_!=null&&Kr(h,!!j,_,!0);return;case"textarea":pr("invalid",h),Z=V=j=null;for(Ne in _)if(_.hasOwnProperty(Ne)&&(qe=_[Ne],qe!=null))switch(Ne){case"value":j=qe;break;case"defaultValue":V=qe;break;case"children":Z=qe;break;case"dangerouslySetInnerHTML":if(qe!=null)throw Error(r(91));break;default:Yr(h,y,Ne,qe,_,null)}Hr(h,j,V,Z);return;case"option":for(lt in _)_.hasOwnProperty(lt)&&(j=_[lt],j!=null)&&(lt==="selected"?h.selected=j&&typeof j!="function"&&typeof j!="symbol":Yr(h,y,lt,j,_,null));return;case"dialog":pr("beforetoggle",h),pr("toggle",h),pr("cancel",h),pr("close",h);break;case"iframe":case"object":pr("load",h);break;case"video":case"audio":for(j=0;j<_v.length;j++)pr(_v[j],h);break;case"image":pr("error",h),pr("load",h);break;case"details":pr("toggle",h);break;case"embed":case"source":case"link":pr("error",h),pr("load",h);case"area":case"base":case"br":case"col":case"hr":case"keygen":case"meta":case"param":case"track":case"wbr":case"menuitem":for(vt in _)if(_.hasOwnProperty(vt)&&(j=_[vt],j!=null))switch(vt){case"children":case"dangerouslySetInnerHTML":throw Error(r(137,y));default:Yr(h,y,vt,j,_,null)}return;default:if(yl(y)){for(Rt in _)_.hasOwnProperty(Rt)&&(j=_[Rt],j!==void 0&&sM(h,y,Rt,j,_,void 0));return}}for(qe in _)_.hasOwnProperty(qe)&&(j=_[qe],j!=null&&Yr(h,y,qe,j,_,null))}function Ede(h,y,_,j){switch(y){case"div":case"span":case"svg":case"path":case"a":case"g":case"p":case"li":break;case"input":var V=null,Z=null,Ne=null,qe=null,lt=null,vt=null,Rt=null;for(At in _){var Ut=_[At];if(_.hasOwnProperty(At)&&Ut!=null)switch(At){case"checked":break;case"value":break;case"defaultValue":lt=Ut;default:j.hasOwnProperty(At)||Yr(h,y,At,null,j,Ut)}}for(var kt in j){var At=j[kt];if(Ut=_[kt],j.hasOwnProperty(kt)&&(At!=null||Ut!=null))switch(kt){case"type":Z=At;break;case"name":V=At;break;case"checked":vt=At;break;case"defaultChecked":Rt=At;break;case"value":Ne=At;break;case"defaultValue":qe=At;break;case"children":case"dangerouslySetInnerHTML":if(At!=null)throw Error(r(137,y));break;default:At!==Ut&&Yr(h,y,kt,At,j,Ut)}}Ra(h,Ne,qe,lt,vt,Rt,Z,V);return;case"select":At=Ne=qe=kt=null;for(Z in _)if(lt=_[Z],_.hasOwnProperty(Z)&&lt!=null)switch(Z){case"value":break;case"multiple":At=lt;default:j.hasOwnProperty(Z)||Yr(h,y,Z,null,j,lt)}for(V in j)if(Z=j[V],lt=_[V],j.hasOwnProperty(V)&&(Z!=null||lt!=null))switch(V){case"value":kt=Z;break;case"defaultValue":qe=Z;break;case"multiple":Ne=Z;default:Z!==lt&&Yr(h,y,V,Z,j,lt)}y=qe,_=Ne,j=At,kt!=null?Kr(h,!!_,kt,!1):!!j!=!!_&&(y!=null?Kr(h,!!_,y,!0):Kr(h,!!_,_?[]:"",!1));return;case"textarea":At=kt=null;for(qe in _)if(V=_[qe],_.hasOwnProperty(qe)&&V!=null&&!j.hasOwnProperty(qe))switch(qe){case"value":break;case"children":break;default:Yr(h,y,qe,null,j,V)}for(Ne in j)if(V=j[Ne],Z=_[Ne],j.hasOwnProperty(Ne)&&(V!=null||Z!=null))switch(Ne){case"value":kt=V;break;case"defaultValue":At=V;break;case"children":break;case"dangerouslySetInnerHTML":if(V!=null)throw Error(r(91));break;default:V!==Z&&Yr(h,y,Ne,V,j,Z)}ur(h,kt,At);return;case"option":for(var bn in _)kt=_[bn],_.hasOwnProperty(bn)&&kt!=null&&!j.hasOwnProperty(bn)&&(bn==="selected"?h.selected=!1:Yr(h,y,bn,null,j,kt));for(lt in j)kt=j[lt],At=_[lt],j.hasOwnProperty(lt)&&kt!==At&&(kt!=null||At!=null)&&(lt==="selected"?h.selected=kt&&typeof kt!="function"&&typeof kt!="symbol":Yr(h,y,lt,kt,j,At));return;case"img":case"link":case"area":case"base":case"br":case"col":case"embed":case"hr":case"keygen":case"meta":case"param":case"source":case"track":case"wbr":case"menuitem":for(var In in _)kt=_[In],_.hasOwnProperty(In)&&kt!=null&&!j.hasOwnProperty(In)&&Yr(h,y,In,null,j,kt);for(vt in j)if(kt=j[vt],At=_[vt],j.hasOwnProperty(vt)&&kt!==At&&(kt!=null||At!=null))switch(vt){case"children":case"dangerouslySetInnerHTML":if(kt!=null)throw Error(r(137,y));break;default:Yr(h,y,vt,kt,j,At)}return;default:if(yl(y)){for(var Qr in _)kt=_[Qr],_.hasOwnProperty(Qr)&&kt!==void 0&&!j.hasOwnProperty(Qr)&&sM(h,y,Qr,void 0,j,kt);for(Rt in j)kt=j[Rt],At=_[Rt],!j.hasOwnProperty(Rt)||kt===At||kt===void 0&&At===void 0||sM(h,y,Rt,kt,j,At);return}}for(var gt in _)kt=_[gt],_.hasOwnProperty(gt)&&kt!=null&&!j.hasOwnProperty(gt)&&Yr(h,y,gt,null,j,kt);for(Ut in j)kt=j[Ut],At=_[Ut],!j.hasOwnProperty(Ut)||kt===At||kt==null&&At==null||Yr(h,y,Ut,kt,j,At)}function b8(h){switch(h){case"css":case"script":case"font":case"img":case"image":case"input":case"link":return!0;default:return!1}}function Dde(){if(typeof performance.getEntriesByType=="function"){for(var h=0,y=0,_=performance.getEntriesByType("resource"),j=0;j<_.length;j++){var V=_[j],Z=V.transferSize,Ne=V.initiatorType,qe=V.duration;if(Z&&qe&&b8(Ne)){for(Ne=0,qe=V.responseEnd,j+=1;j<_.length;j++){var lt=_[j],vt=lt.startTime;if(vt>qe)break;var Rt=lt.transferSize,Ut=lt.initiatorType;Rt&&b8(Ut)&&(lt=lt.responseEnd,Ne+=Rt*(lt<qe?1:(qe-vt)/(lt-vt)))}if(--j,y+=8*(Z+Ne)/(V.duration/1e3),h++,10<h)break}}if(0<h)return y/h/1e6}return navigator.connection&&(h=navigator.connection.downlink,typeof h=="number")?h:5}var oM=null,lM=null;function z_(h){return h.nodeType===9?h:h.ownerDocument}function x8(h){switch(h){case"http://www.w3.org/2000/svg":return 1;case"http://www.w3.org/1998/Math/MathML":return 2;default:return 0}}function y8(h,y){if(h===0)switch(y){case"svg":return 1;case"math":return 2;default:return 0}return h===1&&y==="foreignObject"?0:h}function cM(h,y){return h==="textarea"||h==="noscript"||typeof y.children=="string"||typeof y.children=="number"||typeof y.children=="bigint"||typeof y.dangerouslySetInnerHTML=="object"&&y.dangerouslySetInnerHTML!==null&&y.dangerouslySetInnerHTML.__html!=null}var dM=null;function Fde(){var h=window.event;return h&&h.type==="popstate"?h===dM?!1:(dM=h,!0):(dM=null,!1)}var v8=typeof setTimeout=="function"?setTimeout:void 0,Rde=typeof clearTimeout=="function"?clearTimeout:void 0,w8=typeof Promise=="function"?Promise:void 0,Lde=typeof queueMicrotask=="function"?queueMicrotask:typeof w8<"u"?function(h){return w8.resolve(null).then(h).catch(Ide)}:v8;function Ide(h){setTimeout(function(){throw h})}function lh(h){return h==="head"}function S8(h,y){var _=y,j=0;do{var V=_.nextSibling;if(h.removeChild(_),V&&V.nodeType===8)if(_=V.data,_==="/$"||_==="/&"){if(j===0){h.removeChild(V),Tb(y);return}j--}else if(_==="$"||_==="$?"||_==="$~"||_==="$!"||_==="&")j++;else if(_==="html")Nv(h.ownerDocument.documentElement);else if(_==="head"){_=h.ownerDocument.head,Nv(_);for(var Z=_.firstChild;Z;){var Ne=Z.nextSibling,qe=Z.nodeName;Z[Ze]||qe==="SCRIPT"||qe==="STYLE"||qe==="LINK"&&Z.rel.toLowerCase()==="stylesheet"||_.removeChild(Z),Z=Ne}}else _==="body"&&Nv(h.ownerDocument.body);_=V}while(_);Tb(y)}function _8(h,y){var _=h;h=0;do{var j=_.nextSibling;if(_.nodeType===1?y?(_._stashedDisplay=_.style.display,_.style.display="none"):(_.style.display=_._stashedDisplay||"",_.getAttribute("style")===""&&_.removeAttribute("style")):_.nodeType===3&&(y?(_._stashedText=_.nodeValue,_.nodeValue=""):_.nodeValue=_._stashedText||""),j&&j.nodeType===8)if(_=j.data,_==="/$"){if(h===0)break;h--}else _!=="$"&&_!=="$?"&&_!=="$~"&&_!=="$!"||h++;_=j}while(_)}function uM(h){var y=h.firstChild;for(y&&y.nodeType===10&&(y=y.nextSibling);y;){var _=y;switch(y=y.nextSibling,_.nodeName){case"HTML":case"HEAD":case"BODY":uM(_),Le(_);continue;case"SCRIPT":case"STYLE":continue;case"LINK":if(_.rel.toLowerCase()==="stylesheet")continue}h.removeChild(_)}}function Ode(h,y,_,j){for(;h.nodeType===1;){var V=_;if(h.nodeName.toLowerCase()!==y.toLowerCase()){if(!j&&(h.nodeName!=="INPUT"||h.type!=="hidden"))break}else if(j){if(!h[Ze])switch(y){case"meta":if(!h.hasAttribute("itemprop"))break;return h;case"link":if(Z=h.getAttribute("rel"),Z==="stylesheet"&&h.hasAttribute("data-precedence"))break;if(Z!==V.rel||h.getAttribute("href")!==(V.href==null||V.href===""?null:V.href)||h.getAttribute("crossorigin")!==(V.crossOrigin==null?null:V.crossOrigin)||h.getAttribute("title")!==(V.title==null?null:V.title))break;return h;case"style":if(h.hasAttribute("data-precedence"))break;return h;case"script":if(Z=h.getAttribute("src"),(Z!==(V.src==null?null:V.src)||h.getAttribute("type")!==(V.type==null?null:V.type)||h.getAttribute("crossorigin")!==(V.crossOrigin==null?null:V.crossOrigin))&&Z&&h.hasAttribute("async")&&!h.hasAttribute("itemprop"))break;return h;default:return h}}else if(y==="input"&&h.type==="hidden"){var Z=V.name==null?null:""+V.name;if(V.type==="hidden"&&h.getAttribute("name")===Z)return h}else return h;if(h=Fl(h.nextSibling),h===null)break}return null}function zde(h,y,_){if(y==="")return null;for(;h.nodeType!==3;)if((h.nodeType!==1||h.nodeName!=="INPUT"||h.type!=="hidden")&&!_||(h=Fl(h.nextSibling),h===null))return null;return h}function k8(h,y){for(;h.nodeType!==8;)if((h.nodeType!==1||h.nodeName!=="INPUT"||h.type!=="hidden")&&!y||(h=Fl(h.nextSibling),h===null))return null;return h}function mM(h){return h.data==="$?"||h.data==="$~"}function hM(h){return h.data==="$!"||h.data==="$?"&&h.ownerDocument.readyState!=="loading"}function Ude(h,y){var _=h.ownerDocument;if(h.data==="$~")h._reactRetry=y;else if(h.data!=="$?"||_.readyState!=="loading")y();else{var j=function(){y(),_.removeEventListener("DOMContentLoaded",j)};_.addEventListener("DOMContentLoaded",j),h._reactRetry=j}}function Fl(h){for(;h!=null;h=h.nextSibling){var y=h.nodeType;if(y===1||y===3)break;if(y===8){if(y=h.data,y==="$"||y==="$!"||y==="$?"||y==="$~"||y==="&"||y==="F!"||y==="F")break;if(y==="/$"||y==="/&")return null}}return h}var pM=null;function N8(h){h=h.nextSibling;for(var y=0;h;){if(h.nodeType===8){var _=h.data;if(_==="/$"||_==="/&"){if(y===0)return Fl(h.nextSibling);y--}else _!=="$"&&_!=="$!"&&_!=="$?"&&_!=="$~"&&_!=="&"||y++}h=h.nextSibling}return null}function C8(h){h=h.previousSibling;for(var y=0;h;){if(h.nodeType===8){var _=h.data;if(_==="$"||_==="$!"||_==="$?"||_==="$~"||_==="&"){if(y===0)return h;y--}else _!=="/$"&&_!=="/&"||y++}h=h.previousSibling}return null}function P8(h,y,_){switch(y=z_(_),h){case"html":if(h=y.documentElement,!h)throw Error(r(452));return h;case"head":if(h=y.head,!h)throw Error(r(453));return h;case"body":if(h=y.body,!h)throw Error(r(454));return h;default:throw Error(r(451))}}function Nv(h){for(var y=h.attributes;y.length;)h.removeAttributeNode(y[0]);Le(h)}var Rl=new Map,T8=new Set;function U_(h){return typeof h.getRootNode=="function"?h.getRootNode():h.nodeType===9?h:h.ownerDocument}var _u=J.d;J.d={f:Bde,r:Hde,D:qde,C:$de,L:Vde,m:Gde,X:Kde,S:Wde,M:Xde};function Bde(){var h=_u.f(),y=M_();return h||y}function Hde(h){var y=Ae(h);y!==null&&y.tag===5&&y.type==="form"?VU(y):_u.r(h)}var Nb=typeof document>"u"?null:document;function A8(h,y,_){var j=Nb;if(j&&typeof y=="string"&&y){var V=On(y);V='link[rel="'+h+'"][href="'+V+'"]',typeof _=="string"&&(V+='[crossorigin="'+_+'"]'),T8.has(V)||(T8.add(V),h={rel:h,crossOrigin:_,href:y},j.querySelector(V)===null&&(y=j.createElement("link"),ms(y,"link",h),nt(y),j.head.appendChild(y)))}}function qde(h){_u.D(h),A8("dns-prefetch",h,null)}function $de(h,y){_u.C(h,y),A8("preconnect",h,y)}function Vde(h,y,_){_u.L(h,y,_);var j=Nb;if(j&&h&&y){var V='link[rel="preload"][as="'+On(y)+'"]';y==="image"&&_&&_.imageSrcSet?(V+='[imagesrcset="'+On(_.imageSrcSet)+'"]',typeof _.imageSizes=="string"&&(V+='[imagesizes="'+On(_.imageSizes)+'"]')):V+='[href="'+On(h)+'"]';var Z=V;switch(y){case"style":Z=Cb(h);break;case"script":Z=Pb(h)}Rl.has(Z)||(h=m({rel:"preload",href:y==="image"&&_&&_.imageSrcSet?void 0:h,as:y},_),Rl.set(Z,h),j.querySelector(V)!==null||y==="style"&&j.querySelector(Cv(Z))||y==="script"&&j.querySelector(Pv(Z))||(y=j.createElement("link"),ms(y,"link",h),nt(y),j.head.appendChild(y)))}}function Gde(h,y){_u.m(h,y);var _=Nb;if(_&&h){var j=y&&typeof y.as=="string"?y.as:"script",V='link[rel="modulepreload"][as="'+On(j)+'"][href="'+On(h)+'"]',Z=V;switch(j){case"audioworklet":case"paintworklet":case"serviceworker":case"sharedworker":case"worker":case"script":Z=Pb(h)}if(!Rl.has(Z)&&(h=m({rel:"modulepreload",href:h},y),Rl.set(Z,h),_.querySelector(V)===null)){switch(j){case"audioworklet":case"paintworklet":case"serviceworker":case"sharedworker":case"worker":case"script":if(_.querySelector(Pv(Z)))return}j=_.createElement("link"),ms(j,"link",h),nt(j),_.head.appendChild(j)}}}function Wde(h,y,_){_u.S(h,y,_);var j=Nb;if(j&&h){var V=tt(j).hoistableStyles,Z=Cb(h);y=y||"default";var Ne=V.get(Z);if(!Ne){var qe={loading:0,preload:null};if(Ne=j.querySelector(Cv(Z)))qe.loading=5;else{h=m({rel:"stylesheet",href:h,"data-precedence":y},_),(_=Rl.get(Z))&&fM(h,_);var lt=Ne=j.createElement("link");nt(lt),ms(lt,"link",h),lt._p=new Promise(function(vt,Rt){lt.onload=vt,lt.onerror=Rt}),lt.addEventListener("load",function(){qe.loading|=1}),lt.addEventListener("error",function(){qe.loading|=2}),qe.loading|=4,B_(Ne,y,j)}Ne={type:"stylesheet",instance:Ne,count:1,state:qe},V.set(Z,Ne)}}}function Kde(h,y){_u.X(h,y);var _=Nb;if(_&&h){var j=tt(_).hoistableScripts,V=Pb(h),Z=j.get(V);Z||(Z=_.querySelector(Pv(V)),Z||(h=m({src:h,async:!0},y),(y=Rl.get(V))&&gM(h,y),Z=_.createElement("script"),nt(Z),ms(Z,"link",h),_.head.appendChild(Z)),Z={type:"script",instance:Z,count:1,state:null},j.set(V,Z))}}function Xde(h,y){_u.M(h,y);var _=Nb;if(_&&h){var j=tt(_).hoistableScripts,V=Pb(h),Z=j.get(V);Z||(Z=_.querySelector(Pv(V)),Z||(h=m({src:h,async:!0,type:"module"},y),(y=Rl.get(V))&&gM(h,y),Z=_.createElement("script"),nt(Z),ms(Z,"link",h),_.head.appendChild(Z)),Z={type:"script",instance:Z,count:1,state:null},j.set(V,Z))}}function j8(h,y,_,j){var V=(V=B.current)?U_(V):null;if(!V)throw Error(r(446));switch(h){case"meta":case"title":return null;case"style":return typeof _.precedence=="string"&&typeof _.href=="string"?(y=Cb(_.href),_=tt(V).hoistableStyles,j=_.get(y),j||(j={type:"style",instance:null,count:0,state:null},_.set(y,j)),j):{type:"void",instance:null,count:0,state:null};case"link":if(_.rel==="stylesheet"&&typeof _.href=="string"&&typeof _.precedence=="string"){h=Cb(_.href);var Z=tt(V).hoistableStyles,Ne=Z.get(h);if(Ne||(V=V.ownerDocument||V,Ne={type:"stylesheet",instance:null,count:0,state:{loading:0,preload:null}},Z.set(h,Ne),(Z=V.querySelector(Cv(h)))&&!Z._p&&(Ne.instance=Z,Ne.state.loading=5),Rl.has(h)||(_={rel:"preload",as:"style",href:_.href,crossOrigin:_.crossOrigin,integrity:_.integrity,media:_.media,hrefLang:_.hrefLang,referrerPolicy:_.referrerPolicy},Rl.set(h,_),Z||Yde(V,h,_,Ne.state))),y&&j===null)throw Error(r(528,""));return Ne}if(y&&j!==null)throw Error(r(529,""));return null;case"script":return y=_.async,_=_.src,typeof _=="string"&&y&&typeof y!="function"&&typeof y!="symbol"?(y=Pb(_),_=tt(V).hoistableScripts,j=_.get(y),j||(j={type:"script",instance:null,count:0,state:null},_.set(y,j)),j):{type:"void",instance:null,count:0,state:null};default:throw Error(r(444,h))}}function Cb(h){return'href="'+On(h)+'"'}function Cv(h){return'link[rel="stylesheet"]['+h+"]"}function M8(h){return m({},h,{"data-precedence":h.precedence,precedence:null})}function Yde(h,y,_,j){h.querySelector('link[rel="preload"][as="style"]['+y+"]")?j.loading=1:(y=h.createElement("link"),j.preload=y,y.addEventListener("load",function(){return j.loading|=1}),y.addEventListener("error",function(){return j.loading|=2}),ms(y,"link",_),nt(y),h.head.appendChild(y))}function Pb(h){return'[src="'+On(h)+'"]'}function Pv(h){return"script[async]"+h}function E8(h,y,_){if(y.count++,y.instance===null)switch(y.type){case"style":var j=h.querySelector('style[data-href~="'+On(_.href)+'"]');if(j)return y.instance=j,nt(j),j;var V=m({},_,{"data-href":_.href,"data-precedence":_.precedence,href:null,precedence:null});return j=(h.ownerDocument||h).createElement("style"),nt(j),ms(j,"style",V),B_(j,_.precedence,h),y.instance=j;case"stylesheet":V=Cb(_.href);var Z=h.querySelector(Cv(V));if(Z)return y.state.loading|=4,y.instance=Z,nt(Z),Z;j=M8(_),(V=Rl.get(V))&&fM(j,V),Z=(h.ownerDocument||h).createElement("link"),nt(Z);var Ne=Z;return Ne._p=new Promise(function(qe,lt){Ne.onload=qe,Ne.onerror=lt}),ms(Z,"link",j),y.state.loading|=4,B_(Z,_.precedence,h),y.instance=Z;case"script":return Z=Pb(_.src),(V=h.querySelector(Pv(Z)))?(y.instance=V,nt(V),V):(j=_,(V=Rl.get(Z))&&(j=m({},_),gM(j,V)),h=h.ownerDocument||h,V=h.createElement("script"),nt(V),ms(V,"link",j),h.head.appendChild(V),y.instance=V);case"void":return null;default:throw Error(r(443,y.type))}else y.type==="stylesheet"&&(y.state.loading&4)===0&&(j=y.instance,y.state.loading|=4,B_(j,_.precedence,h));return y.instance}function B_(h,y,_){for(var j=_.querySelectorAll('link[rel="stylesheet"][data-precedence],style[data-precedence]'),V=j.length?j[j.length-1]:null,Z=V,Ne=0;Ne<j.length;Ne++){var qe=j[Ne];if(qe.dataset.precedence===y)Z=qe;else if(Z!==V)break}Z?Z.parentNode.insertBefore(h,Z.nextSibling):(y=_.nodeType===9?_.head:_,y.insertBefore(h,y.firstChild))}function fM(h,y){h.crossOrigin==null&&(h.crossOrigin=y.crossOrigin),h.referrerPolicy==null&&(h.referrerPolicy=y.referrerPolicy),h.title==null&&(h.title=y.title)}function gM(h,y){h.crossOrigin==null&&(h.crossOrigin=y.crossOrigin),h.referrerPolicy==null&&(h.referrerPolicy=y.referrerPolicy),h.integrity==null&&(h.integrity=y.integrity)}var H_=null;function D8(h,y,_){if(H_===null){var j=new Map,V=H_=new Map;V.set(_,j)}else V=H_,j=V.get(_),j||(j=new Map,V.set(_,j));if(j.has(h))return j;for(j.set(h,null),_=_.getElementsByTagName(h),V=0;V<_.length;V++){var Z=_[V];if(!(Z[Ze]||Z[jt]||h==="link"&&Z.getAttribute("rel")==="stylesheet")&&Z.namespaceURI!=="http://www.w3.org/2000/svg"){var Ne=Z.getAttribute(y)||"";Ne=h+Ne;var qe=j.get(Ne);qe?qe.push(Z):j.set(Ne,[Z])}}return j}function F8(h,y,_){h=h.ownerDocument||h,h.head.insertBefore(_,y==="title"?h.querySelector("head > title"):null)}function Qde(h,y,_){if(_===1||y.itemProp!=null)return!1;switch(h){case"meta":case"title":return!0;case"style":if(typeof y.precedence!="string"||typeof y.href!="string"||y.href==="")break;return!0;case"link":if(typeof y.rel!="string"||typeof y.href!="string"||y.href===""||y.onLoad||y.onError)break;return y.rel==="stylesheet"?(h=y.disabled,typeof y.precedence=="string"&&h==null):!0;case"script":if(y.async&&typeof y.async!="function"&&typeof y.async!="symbol"&&!y.onLoad&&!y.onError&&y.src&&typeof y.src=="string")return!0}return!1}function R8(h){return!(h.type==="stylesheet"&&(h.state.loading&3)===0)}function Jde(h,y,_,j){if(_.type==="stylesheet"&&(typeof j.media!="string"||matchMedia(j.media).matches!==!1)&&(_.state.loading&4)===0){if(_.instance===null){var V=Cb(j.href),Z=y.querySelector(Cv(V));if(Z){y=Z._p,y!==null&&typeof y=="object"&&typeof y.then=="function"&&(h.count++,h=q_.bind(h),y.then(h,h)),_.state.loading|=4,_.instance=Z,nt(Z);return}Z=y.ownerDocument||y,j=M8(j),(V=Rl.get(V))&&fM(j,V),Z=Z.createElement("link"),nt(Z);var Ne=Z;Ne._p=new Promise(function(qe,lt){Ne.onload=qe,Ne.onerror=lt}),ms(Z,"link",j),_.instance=Z}h.stylesheets===null&&(h.stylesheets=new Map),h.stylesheets.set(_,y),(y=_.state.preload)&&(_.state.loading&3)===0&&(h.count++,_=q_.bind(h),y.addEventListener("load",_),y.addEventListener("error",_))}}var bM=0;function Zde(h,y){return h.stylesheets&&h.count===0&&V_(h,h.stylesheets),0<h.count||0<h.imgCount?function(_){var j=setTimeout(function(){if(h.stylesheets&&V_(h,h.stylesheets),h.unsuspend){var Z=h.unsuspend;h.unsuspend=null,Z()}},6e4+y);0<h.imgBytes&&bM===0&&(bM=62500*Dde());var V=setTimeout(function(){if(h.waitingForImages=!1,h.count===0&&(h.stylesheets&&V_(h,h.stylesheets),h.unsuspend)){var Z=h.unsuspend;h.unsuspend=null,Z()}},(h.imgBytes>bM?50:800)+y);return h.unsuspend=_,function(){h.unsuspend=null,clearTimeout(j),clearTimeout(V)}}:null}function q_(){if(this.count--,this.count===0&&(this.imgCount===0||!this.waitingForImages)){if(this.stylesheets)V_(this,this.stylesheets);else if(this.unsuspend){var h=this.unsuspend;this.unsuspend=null,h()}}}var $_=null;function V_(h,y){h.stylesheets=null,h.unsuspend!==null&&(h.count++,$_=new Map,y.forEach(eue,h),$_=null,q_.call(h))}function eue(h,y){if(!(y.state.loading&4)){var _=$_.get(h);if(_)var j=_.get(null);else{_=new Map,$_.set(h,_);for(var V=h.querySelectorAll("link[data-precedence],style[data-precedence]"),Z=0;Z<V.length;Z++){var Ne=V[Z];(Ne.nodeName==="LINK"||Ne.getAttribute("media")!=="not all")&&(_.set(Ne.dataset.precedence,Ne),j=Ne)}j&&_.set(null,j)}V=y.instance,Ne=V.getAttribute("data-precedence"),Z=_.get(Ne)||j,Z===j&&_.set(null,V),_.set(Ne,V),this.count++,j=q_.bind(this),V.addEventListener("load",j),V.addEventListener("error",j),Z?Z.parentNode.insertBefore(V,Z.nextSibling):(h=h.nodeType===9?h.head:h,h.insertBefore(V,h.firstChild)),y.state.loading|=4}}var Tv={$$typeof:N,Provider:null,Consumer:null,_currentValue:ue,_currentValue2:ue,_threadCount:0};function tue(h,y,_,j,V,Z,Ne,qe,lt){this.tag=1,this.containerInfo=h,this.pingCache=this.current=this.pendingChildren=null,this.timeoutHandle=-1,this.callbackNode=this.next=this.pendingContext=this.context=this.cancelPendingCommit=null,this.callbackPriority=0,this.expirationTimes=He(-1),this.entangledLanes=this.shellSuspendCounter=this.errorRecoveryDisabledLanes=this.expiredLanes=this.warmLanes=this.pingedLanes=this.suspendedLanes=this.pendingLanes=0,this.entanglements=He(0),this.hiddenUpdates=He(null),this.identifierPrefix=j,this.onUncaughtError=V,this.onCaughtError=Z,this.onRecoverableError=Ne,this.pooledCache=null,this.pooledCacheLanes=0,this.formState=lt,this.incompleteTransitions=new Map}function L8(h,y,_,j,V,Z,Ne,qe,lt,vt,Rt,Ut){return h=new tue(h,y,_,Ne,lt,vt,Rt,Ut,qe),y=1,Z===!0&&(y|=24),Z=Ko(3,null,null,y),h.current=Z,Z.stateNode=h,y=YA(),y.refCount++,h.pooledCache=y,y.refCount++,Z.memoizedState={element:j,isDehydrated:_,cache:y},ej(Z),h}function I8(h){return h?(h=ab,h):ab}function O8(h,y,_,j,V,Z){V=I8(V),j.context===null?j.context=V:j.pendingContext=V,j=Qm(y),j.payload={element:_},Z=Z===void 0?null:Z,Z!==null&&(j.callback=Z),_=Jm(h,j,y),_!==null&&(To(_,h,y),sv(_,h,y))}function z8(h,y){if(h=h.memoizedState,h!==null&&h.dehydrated!==null){var _=h.retryLane;h.retryLane=_!==0&&_<y?_:y}}function xM(h,y){z8(h,y),(h=h.alternate)&&z8(h,y)}function U8(h){if(h.tag===13||h.tag===31){var y=Zp(h,67108864);y!==null&&To(y,h,67108864),xM(h,67108864)}}function B8(h){if(h.tag===13||h.tag===31){var y=Zo();y=Gt(y);var _=Zp(h,y);_!==null&&To(_,h,y),xM(h,y)}}var G_=!0;function nue(h,y,_,j){var V=re.T;re.T=null;var Z=J.p;try{J.p=2,yM(h,y,_,j)}finally{J.p=Z,re.T=V}}function rue(h,y,_,j){var V=re.T;re.T=null;var Z=J.p;try{J.p=8,yM(h,y,_,j)}finally{J.p=Z,re.T=V}}function yM(h,y,_,j){if(G_){var V=vM(j);if(V===null)iM(h,y,j,W_,_),q8(h,j);else if(iue(V,h,y,_,j))j.stopPropagation();else if(q8(h,j),y&4&&-1<aue.indexOf(h)){for(;V!==null;){var Z=Ae(V);if(Z!==null)switch(Z.tag){case 3:if(Z=Z.stateNode,Z.current.memoizedState.isDehydrated){var Ne=we(Z.pendingLanes);if(Ne!==0){var qe=Z;for(qe.pendingLanes|=2,qe.entangledLanes|=2;Ne;){var lt=1<<31-Oe(Ne);qe.entanglements[1]|=lt,Ne&=~lt}ud(Z),(Lr&6)===0&&(A_=L()+500,Sv(0))}}break;case 31:case 13:qe=Zp(Z,2),qe!==null&&To(qe,Z,2),M_(),xM(Z,2)}if(Z=vM(j),Z===null&&iM(h,y,j,W_,_),Z===V)break;V=Z}V!==null&&j.stopPropagation()}else iM(h,y,j,null,_)}}function vM(h){return h=vo(h),wM(h)}var W_=null;function wM(h){if(W_=null,h=dt(h),h!==null){var y=s(h);if(y===null)h=null;else{var _=y.tag;if(_===13){if(h=o(y),h!==null)return h;h=null}else if(_===31){if(h=l(y),h!==null)return h;h=null}else if(_===3){if(y.stateNode.current.memoizedState.isDehydrated)return y.tag===3?y.stateNode.containerInfo:null;h=null}else y!==h&&(h=null)}}return W_=h,null}function H8(h){switch(h){case"beforetoggle":case"cancel":case"click":case"close":case"contextmenu":case"copy":case"cut":case"auxclick":case"dblclick":case"dragend":case"dragstart":case"drop":case"focusin":case"focusout":case"input":case"invalid":case"keydown":case"keypress":case"keyup":case"mousedown":case"mouseup":case"paste":case"pause":case"play":case"pointercancel":case"pointerdown":case"pointerup":case"ratechange":case"reset":case"resize":case"seeked":case"submit":case"toggle":case"touchcancel":case"touchend":case"touchstart":case"volumechange":case"change":case"selectionchange":case"textInput":case"compositionstart":case"compositionend":case"compositionupdate":case"beforeblur":case"afterblur":case"beforeinput":case"blur":case"fullscreenchange":case"focus":case"hashchange":case"popstate":case"select":case"selectstart":return 2;case"drag":case"dragenter":case"dragexit":case"dragleave":case"dragover":case"mousemove":case"mouseout":case"mouseover":case"pointermove":case"pointerout":case"pointerover":case"scroll":case"touchmove":case"wheel":case"mouseenter":case"mouseleave":case"pointerenter":case"pointerleave":return 8;case"message":switch(ee()){case ge:return 2;case ke:return 8;case je:case Te:return 32;case xe:return 268435456;default:return 32}default:return 32}}var SM=!1,ch=null,dh=null,uh=null,Av=new Map,jv=new Map,mh=[],aue="mousedown mouseup touchcancel touchend touchstart auxclick dblclick pointercancel pointerdown pointerup dragend dragstart drop compositionend compositionstart keydown keypress keyup input textInput copy cut paste click change contextmenu reset".split(" ");function q8(h,y){switch(h){case"focusin":case"focusout":ch=null;break;case"dragenter":case"dragleave":dh=null;break;case"mouseover":case"mouseout":uh=null;break;case"pointerover":case"pointerout":Av.delete(y.pointerId);break;case"gotpointercapture":case"lostpointercapture":jv.delete(y.pointerId)}}function Mv(h,y,_,j,V,Z){return h===null||h.nativeEvent!==Z?(h={blockedOn:y,domEventName:_,eventSystemFlags:j,nativeEvent:Z,targetContainers:[V]},y!==null&&(y=Ae(y),y!==null&&U8(y)),h):(h.eventSystemFlags|=j,y=h.targetContainers,V!==null&&y.indexOf(V)===-1&&y.push(V),h)}function iue(h,y,_,j,V){switch(y){case"focusin":return ch=Mv(ch,h,y,_,j,V),!0;case"dragenter":return dh=Mv(dh,h,y,_,j,V),!0;case"mouseover":return uh=Mv(uh,h,y,_,j,V),!0;case"pointerover":var Z=V.pointerId;return Av.set(Z,Mv(Av.get(Z)||null,h,y,_,j,V)),!0;case"gotpointercapture":return Z=V.pointerId,jv.set(Z,Mv(jv.get(Z)||null,h,y,_,j,V)),!0}return!1}function $8(h){var y=dt(h.target);if(y!==null){var _=s(y);if(_!==null){if(y=_.tag,y===13){if(y=o(_),y!==null){h.blockedOn=y,mn(h.priority,function(){B8(_)});return}}else if(y===31){if(y=l(_),y!==null){h.blockedOn=y,mn(h.priority,function(){B8(_)});return}}else if(y===3&&_.stateNode.current.memoizedState.isDehydrated){h.blockedOn=_.tag===3?_.stateNode.containerInfo:null;return}}}h.blockedOn=null}function K_(h){if(h.blockedOn!==null)return!1;for(var y=h.targetContainers;0<y.length;){var _=vM(h.nativeEvent);if(_===null){_=h.nativeEvent;var j=new _.constructor(_.type,_);Ms=j,_.target.dispatchEvent(j),Ms=null}else return y=Ae(_),y!==null&&U8(y),h.blockedOn=_,!1;y.shift()}return!0}function V8(h,y,_){K_(h)&&_.delete(y)}function sue(){SM=!1,ch!==null&&K_(ch)&&(ch=null),dh!==null&&K_(dh)&&(dh=null),uh!==null&&K_(uh)&&(uh=null),Av.forEach(V8),jv.forEach(V8)}function X_(h,y){h.blockedOn===y&&(h.blockedOn=null,SM||(SM=!0,t.unstable_scheduleCallback(t.unstable_NormalPriority,sue)))}var Y_=null;function G8(h){Y_!==h&&(Y_=h,t.unstable_scheduleCallback(t.unstable_NormalPriority,function(){Y_===h&&(Y_=null);for(var y=0;y<h.length;y+=3){var _=h[y],j=h[y+1],V=h[y+2];if(typeof j!="function"){if(wM(j||_)===null)continue;break}var Z=Ae(_);Z!==null&&(h.splice(y,3),y-=3,vj(Z,{pending:!0,data:V,method:_.method,action:j},j,V))}}))}function Tb(h){function y(lt){return X_(lt,h)}ch!==null&&X_(ch,h),dh!==null&&X_(dh,h),uh!==null&&X_(uh,h),Av.forEach(y),jv.forEach(y);for(var _=0;_<mh.length;_++){var j=mh[_];j.blockedOn===h&&(j.blockedOn=null)}for(;0<mh.length&&(_=mh[0],_.blockedOn===null);)$8(_),_.blockedOn===null&&mh.shift();if(_=(h.ownerDocument||h).$$reactFormReplay,_!=null)for(j=0;j<_.length;j+=3){var V=_[j],Z=_[j+1],Ne=V[Jt]||null;if(typeof Z=="function")Ne||G8(_);else if(Ne){var qe=null;if(Z&&Z.hasAttribute("formAction")){if(V=Z,Ne=Z[Jt]||null)qe=Ne.formAction;else if(wM(V)!==null)continue}else qe=Ne.action;typeof qe=="function"?_[j+1]=qe:(_.splice(j,3),j-=3),G8(_)}}}function W8(){function h(Z){Z.canIntercept&&Z.info==="react-transition"&&Z.intercept({handler:function(){return new Promise(function(Ne){return V=Ne})},focusReset:"manual",scroll:"manual"})}function y(){V!==null&&(V(),V=null),j||setTimeout(_,20)}function _(){if(!j&&!navigation.transition){var Z=navigation.currentEntry;Z&&Z.url!=null&&navigation.navigate(Z.url,{state:Z.getState(),info:"react-transition",history:"replace"})}}if(typeof navigation=="object"){var j=!1,V=null;return navigation.addEventListener("navigate",h),navigation.addEventListener("navigatesuccess",y),navigation.addEventListener("navigateerror",y),setTimeout(_,100),function(){j=!0,navigation.removeEventListener("navigate",h),navigation.removeEventListener("navigatesuccess",y),navigation.removeEventListener("navigateerror",y),V!==null&&(V(),V=null)}}}function _M(h){this._internalRoot=h}Q_.prototype.render=_M.prototype.render=function(h){var y=this._internalRoot;if(y===null)throw Error(r(409));var _=y.current,j=Zo();O8(_,j,h,y,null,null)},Q_.prototype.unmount=_M.prototype.unmount=function(){var h=this._internalRoot;if(h!==null){this._internalRoot=null;var y=h.containerInfo;O8(h.current,2,null,h,null,null),M_(),y[zt]=null}};function Q_(h){this._internalRoot=h}Q_.prototype.unstable_scheduleHydration=function(h){if(h){var y=an();h={blockedOn:null,target:h,priority:y};for(var _=0;_<mh.length&&y!==0&&y<mh[_].priority;_++);mh.splice(_,0,h),_===0&&$8(h)}};var K8=e.version;if(K8!=="19.2.4")throw Error(r(527,K8,"19.2.4"));J.findDOMNode=function(h){var y=h._reactInternals;if(y===void 0)throw typeof h.render=="function"?Error(r(188)):(h=Object.keys(h).join(","),Error(r(268,h)));return h=d(y),h=h!==null?u(h):null,h=h===null?null:h.stateNode,h};var oue={bundleType:0,version:"19.2.4",rendererPackageName:"react-dom",currentDispatcherRef:re,reconcilerVersion:"19.2.4"};if(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__<"u"){var J_=__REACT_DEVTOOLS_GLOBAL_HOOK__;if(!J_.isDisabled&&J_.supportsFiber)try{Ce=J_.inject(oue),ze=J_}catch{}}return Dv.createRoot=function(h,y){if(!i(h))throw Error(r(299));var _=!1,j="",V=tB,Z=nB,Ne=rB;return y!=null&&(y.unstable_strictMode===!0&&(_=!0),y.identifierPrefix!==void 0&&(j=y.identifierPrefix),y.onUncaughtError!==void 0&&(V=y.onUncaughtError),y.onCaughtError!==void 0&&(Z=y.onCaughtError),y.onRecoverableError!==void 0&&(Ne=y.onRecoverableError)),y=L8(h,1,!1,null,null,_,j,null,V,Z,Ne,W8),h[zt]=y.current,aM(h),new _M(y)},Dv.hydrateRoot=function(h,y,_){if(!i(h))throw Error(r(299));var j=!1,V="",Z=tB,Ne=nB,qe=rB,lt=null;return _!=null&&(_.unstable_strictMode===!0&&(j=!0),_.identifierPrefix!==void 0&&(V=_.identifierPrefix),_.onUncaughtError!==void 0&&(Z=_.onUncaughtError),_.onCaughtError!==void 0&&(Ne=_.onCaughtError),_.onRecoverableError!==void 0&&(qe=_.onRecoverableError),_.formState!==void 0&&(lt=_.formState)),y=L8(h,1,!0,y,_??null,j,V,lt,Z,Ne,qe,W8),y.context=I8(null),_=y.current,j=Zo(),j=Gt(j),V=Qm(j),V.callback=null,Jm(_,V,j),_=j,y.current.lanes=_,at(y,_),ud(y),h[zt]=y.current,aM(h),new Q_(y)},Dv.version="19.2.4",Dv}var aH;function xue(){if(aH)return CM.exports;aH=1;function t(){if(!(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__>"u"||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!="function"))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(t)}catch(e){console.error(e)}}return t(),CM.exports=bue(),CM.exports}var yue=xue();const Bn=t=>typeof t=="string",Fv=()=>{let t,e;const n=new Promise((r,i)=>{t=r,e=i});return n.resolve=t,n.reject=e,n},iH=t=>t==null?"":""+t,vue=(t,e,n)=>{t.forEach(r=>{e[r]&&(n[r]=e[r])})},wue=/###/g,sH=t=>t&&t.indexOf("###")>-1?t.replace(wue,"."):t,oH=t=>!t||Bn(t),M0=(t,e,n)=>{const r=Bn(e)?e.split("."):e;let i=0;for(;i<r.length-1;){if(oH(t))return{};const s=sH(r[i]);!t[s]&&n&&(t[s]=new n),Object.prototype.hasOwnProperty.call(t,s)?t=t[s]:t={},++i}return oH(t)?{}:{obj:t,k:sH(r[i])}},lH=(t,e,n)=>{const{obj:r,k:i}=M0(t,e,Object);if(r!==void 0||e.length===1){r[i]=n;return}let s=e[e.length-1],o=e.slice(0,e.length-1),l=M0(t,o,Object);for(;l.obj===void 0&&o.length;)s=`${o[o.length-1]}.${s}`,o=o.slice(0,o.length-1),l=M0(t,o,Object),l?.obj&&typeof l.obj[`${l.k}.${s}`]<"u"&&(l.obj=void 0);l.obj[`${l.k}.${s}`]=n},Sue=(t,e,n,r)=>{const{obj:i,k:s}=M0(t,e,Object);i[s]=i[s]||[],i[s].push(n)},yN=(t,e)=>{const{obj:n,k:r}=M0(t,e);if(n&&Object.prototype.hasOwnProperty.call(n,r))return n[r]},_ue=(t,e,n)=>{const r=yN(t,n);return r!==void 0?r:yN(e,n)},uQ=(t,e,n)=>{for(const r in e)r!=="__proto__"&&r!=="constructor"&&(r in t?Bn(t[r])||t[r]instanceof String||Bn(e[r])||e[r]instanceof String?n&&(t[r]=e[r]):uQ(t[r],e[r],n):t[r]=e[r]);return t},Ab=t=>t.replace(/[\-\[\]\/\{\}\(\)\*\+\?\.\\\^\$\|]/g,"\\$&");var kue={"&":"&amp;","<":"&lt;",">":"&gt;",'"':"&quot;","'":"&#39;","/":"&#x2F;"};const Nue=t=>Bn(t)?t.replace(/[&<>"'\/]/g,e=>kue[e]):t;class Cue{constructor(e){this.capacity=e,this.regExpMap=new Map,this.regExpQueue=[]}getRegExp(e){const n=this.regExpMap.get(e);if(n!==void 0)return n;const r=new RegExp(e);return this.regExpQueue.length===this.capacity&&this.regExpMap.delete(this.regExpQueue.shift()),this.regExpMap.set(e,r),this.regExpQueue.push(e),r}}const Pue=[" ",",","?","!",";"],Tue=new Cue(20),Aue=(t,e,n)=>{e=e||"",n=n||"";const r=Pue.filter(o=>e.indexOf(o)<0&&n.indexOf(o)<0);if(r.length===0)return!0;const i=Tue.getRegExp(`(${r.map(o=>o==="?"?"\\?":o).join("|")})`);let s=!i.test(t);if(!s){const o=t.indexOf(n);o>0&&!i.test(t.substring(0,o))&&(s=!0)}return s},nF=(t,e,n=".")=>{if(!t)return;if(t[e])return Object.prototype.hasOwnProperty.call(t,e)?t[e]:void 0;const r=e.split(n);let i=t;for(let s=0;s<r.length;){if(!i||typeof i!="object")return;let o,l="";for(let c=s;c<r.length;++c)if(c!==s&&(l+=n),l+=r[c],o=i[l],o!==void 0){if(["string","number","boolean"].indexOf(typeof o)>-1&&c<r.length-1)continue;s+=c-s+1;break}i=o}return i},iw=t=>t?.replace("_","-"),jue={type:"logger",log(t){this.output("log",t)},warn(t){this.output("warn",t)},error(t){this.output("error",t)},output(t,e){console?.[t]?.apply?.(console,e)}};class vN{constructor(e,n={}){this.init(e,n)}init(e,n={}){this.prefix=n.prefix||"i18next:",this.logger=e||jue,this.options=n,this.debug=n.debug}log(...e){return this.forward(e,"log","",!0)}warn(...e){return this.forward(e,"warn","",!0)}error(...e){return this.forward(e,"error","")}deprecate(...e){return this.forward(e,"warn","WARNING DEPRECATED: ",!0)}forward(e,n,r,i){return i&&!this.debug?null:(Bn(e[0])&&(e[0]=`${r}${this.prefix} ${e[0]}`),this.logger[n](e))}create(e){return new vN(this.logger,{prefix:`${this.prefix}:${e}:`,...this.options})}clone(e){return e=e||this.options,e.prefix=e.prefix||this.prefix,new vN(this.logger,e)}}var jd=new vN;let KP=class{constructor(){this.observers={}}on(e,n){return e.split(" ").forEach(r=>{this.observers[r]||(this.observers[r]=new Map);const i=this.observers[r].get(n)||0;this.observers[r].set(n,i+1)}),this}off(e,n){if(this.observers[e]){if(!n){delete this.observers[e];return}this.observers[e].delete(n)}}emit(e,...n){this.observers[e]&&Array.from(this.observers[e].entries()).forEach(([i,s])=>{for(let o=0;o<s;o++)i(...n)}),this.observers["*"]&&Array.from(this.observers["*"].entries()).forEach(([i,s])=>{for(let o=0;o<s;o++)i.apply(i,[e,...n])})}};class cH extends KP{constructor(e,n={ns:["translation"],defaultNS:"translation"}){super(),this.data=e||{},this.options=n,this.options.keySeparator===void 0&&(this.options.keySeparator="."),this.options.ignoreJSONStructure===void 0&&(this.options.ignoreJSONStructure=!0)}addNamespaces(e){this.options.ns.indexOf(e)<0&&this.options.ns.push(e)}removeNamespaces(e){const n=this.options.ns.indexOf(e);n>-1&&this.options.ns.splice(n,1)}getResource(e,n,r,i={}){const s=i.keySeparator!==void 0?i.keySeparator:this.options.keySeparator,o=i.ignoreJSONStructure!==void 0?i.ignoreJSONStructure:this.options.ignoreJSONStructure;let l;e.indexOf(".")>-1?l=e.split("."):(l=[e,n],r&&(Array.isArray(r)?l.push(...r):Bn(r)&&s?l.push(...r.split(s)):l.push(r)));const c=yN(this.data,l);return!c&&!n&&!r&&e.indexOf(".")>-1&&(e=l[0],n=l[1],r=l.slice(2).join(".")),c||!o||!Bn(r)?c:nF(this.data?.[e]?.[n],r,s)}addResource(e,n,r,i,s={silent:!1}){const o=s.keySeparator!==void 0?s.keySeparator:this.options.keySeparator;let l=[e,n];r&&(l=l.concat(o?r.split(o):r)),e.indexOf(".")>-1&&(l=e.split("."),i=n,n=l[1]),this.addNamespaces(n),lH(this.data,l,i),s.silent||this.emit("added",e,n,r,i)}addResources(e,n,r,i={silent:!1}){for(const s in r)(Bn(r[s])||Array.isArray(r[s]))&&this.addResource(e,n,s,r[s],{silent:!0});i.silent||this.emit("added",e,n,r)}addResourceBundle(e,n,r,i,s,o={silent:!1,skipCopy:!1}){let l=[e,n];e.indexOf(".")>-1&&(l=e.split("."),i=r,r=n,n=l[1]),this.addNamespaces(n);let c=yN(this.data,l)||{};o.skipCopy||(r=JSON.parse(JSON.stringify(r))),i?uQ(c,r,s):c={...c,...r},lH(this.data,l,c),o.silent||this.emit("added",e,n,r)}removeResourceBundle(e,n){this.hasResourceBundle(e,n)&&delete this.data[e][n],this.removeNamespaces(n),this.emit("removed",e,n)}hasResourceBundle(e,n){return this.getResource(e,n)!==void 0}getResourceBundle(e,n){return n||(n=this.options.defaultNS),this.getResource(e,n)}getDataByLanguage(e){return this.data[e]}hasLanguageSomeTranslations(e){const n=this.getDataByLanguage(e);return!!(n&&Object.keys(n)||[]).find(i=>n[i]&&Object.keys(n[i]).length>0)}toJSON(){return this.data}}var mQ={processors:{},addPostProcessor(t){this.processors[t.name]=t},handle(t,e,n,r,i){return t.forEach(s=>{e=this.processors[s]?.process(e,n,r,i)??e}),e}};const hQ=Symbol("i18next/PATH_KEY");function Mue(){const t=[],e=Object.create(null);let n;return e.get=(r,i)=>(n?.revoke?.(),i===hQ?t:(t.push(i),n=Proxy.revocable(r,e),n.proxy)),Proxy.revocable(Object.create(null),e).proxy}function rF(t,e){const{[hQ]:n}=t(Mue());return n.join(e?.keySeparator??".")}const dH={},jM=t=>!Bn(t)&&typeof t!="boolean"&&typeof t!="number";class wN extends KP{constructor(e,n={}){super(),vue(["resourceStore","languageUtils","pluralResolver","interpolator","backendConnector","i18nFormat","utils"],e,this),this.options=n,this.options.keySeparator===void 0&&(this.options.keySeparator="."),this.logger=jd.create("translator")}changeLanguage(e){e&&(this.language=e)}exists(e,n={interpolation:{}}){const r={...n};if(e==null)return!1;const i=this.resolve(e,r);if(i?.res===void 0)return!1;const s=jM(i.res);return!(r.returnObjects===!1&&s)}extractFromKey(e,n){let r=n.nsSeparator!==void 0?n.nsSeparator:this.options.nsSeparator;r===void 0&&(r=":");const i=n.keySeparator!==void 0?n.keySeparator:this.options.keySeparator;let s=n.ns||this.options.defaultNS||[];const o=r&&e.indexOf(r)>-1,l=!this.options.userDefinedKeySeparator&&!n.keySeparator&&!this.options.userDefinedNsSeparator&&!n.nsSeparator&&!Aue(e,r,i);if(o&&!l){const c=e.match(this.interpolator.nestingRegexp);if(c&&c.length>0)return{key:e,namespaces:Bn(s)?[s]:s};const d=e.split(r);(r!==i||r===i&&this.options.ns.indexOf(d[0])>-1)&&(s=d.shift()),e=d.join(i)}return{key:e,namespaces:Bn(s)?[s]:s}}translate(e,n,r){let i=typeof n=="object"?{...n}:n;if(typeof i!="object"&&this.options.overloadTranslationOptionHandler&&(i=this.options.overloadTranslationOptionHandler(arguments)),typeof i=="object"&&(i={...i}),i||(i={}),e==null)return"";typeof e=="function"&&(e=rF(e,{...this.options,...i})),Array.isArray(e)||(e=[String(e)]);const s=i.returnDetails!==void 0?i.returnDetails:this.options.returnDetails,o=i.keySeparator!==void 0?i.keySeparator:this.options.keySeparator,{key:l,namespaces:c}=this.extractFromKey(e[e.length-1],i),d=c[c.length-1];let u=i.nsSeparator!==void 0?i.nsSeparator:this.options.nsSeparator;u===void 0&&(u=":");const m=i.lng||this.language,p=i.appendNamespaceToCIMode||this.options.appendNamespaceToCIMode;if(m?.toLowerCase()==="cimode")return p?s?{res:`${d}${u}${l}`,usedKey:l,exactUsedKey:l,usedLng:m,usedNS:d,usedParams:this.getUsedParamsDetails(i)}:`${d}${u}${l}`:s?{res:l,usedKey:l,exactUsedKey:l,usedLng:m,usedNS:d,usedParams:this.getUsedParamsDetails(i)}:l;const f=this.resolve(e,i);let x=f?.res;const v=f?.usedKey||l,b=f?.exactUsedKey||l,g=["[object Number]","[object Function]","[object RegExp]"],S=i.joinArrays!==void 0?i.joinArrays:this.options.joinArrays,N=!this.i18nFormat||this.i18nFormat.handleAsObject,P=i.count!==void 0&&!Bn(i.count),C=wN.hasDefaultValue(i),A=P?this.pluralResolver.getSuffix(m,i.count,i):"",T=i.ordinal&&P?this.pluralResolver.getSuffix(m,i.count,{ordinal:!1}):"",F=P&&!i.ordinal&&i.count===0,k=F&&i[`defaultValue${this.options.pluralSeparator}zero`]||i[`defaultValue${A}`]||i[`defaultValue${T}`]||i.defaultValue;let E=x;N&&!x&&C&&(E=k);const $=jM(E),z=Object.prototype.toString.apply(E);if(N&&E&&$&&g.indexOf(z)<0&&!(Bn(S)&&Array.isArray(E))){if(!i.returnObjects&&!this.options.returnObjects){this.options.returnedObjectHandler||this.logger.warn("accessing an object - but returnObjects options is not enabled!");const X=this.options.returnedObjectHandler?this.options.returnedObjectHandler(v,E,{...i,ns:c}):`key '${l} (${this.language})' returned an object instead of string.`;return s?(f.res=X,f.usedParams=this.getUsedParamsDetails(i),f):X}if(o){const X=Array.isArray(E),R=X?[]:{},ne=X?b:v;for(const re in E)if(Object.prototype.hasOwnProperty.call(E,re)){const J=`${ne}${o}${re}`;C&&!x?R[re]=this.translate(J,{...i,defaultValue:jM(k)?k[re]:void 0,joinArrays:!1,ns:c}):R[re]=this.translate(J,{...i,joinArrays:!1,ns:c}),R[re]===J&&(R[re]=E[re])}x=R}}else if(N&&Bn(S)&&Array.isArray(x))x=x.join(S),x&&(x=this.extendTranslation(x,e,i,r));else{let X=!1,R=!1;!this.isValidLookup(x)&&C&&(X=!0,x=k),this.isValidLookup(x)||(R=!0,x=l);const re=(i.missingKeyNoValueFallbackToKey||this.options.missingKeyNoValueFallbackToKey)&&R?void 0:x,J=C&&k!==x&&this.options.updateMissing;if(R||X||J){if(this.logger.log(J?"updateKey":"missingKey",m,d,l,J?k:x),o){const K=this.resolve(l,{...i,keySeparator:!1});K&&K.res&&this.logger.warn("Seems the loaded translations were in flat JSON format instead of nested. Either set keySeparator: false on init or make sure your translations are published in nested format.")}let ue=[];const ie=this.languageUtils.getFallbackCodes(this.options.fallbackLng,i.lng||this.language);if(this.options.saveMissingTo==="fallback"&&ie&&ie[0])for(let K=0;K<ie.length;K++)ue.push(ie[K]);else this.options.saveMissingTo==="all"?ue=this.languageUtils.toResolveHierarchy(i.lng||this.language):ue.push(i.lng||this.language);const se=(K,ae,pe)=>{const be=C&&pe!==x?pe:re;this.options.missingKeyHandler?this.options.missingKeyHandler(K,d,ae,be,J,i):this.backendConnector?.saveMissing&&this.backendConnector.saveMissing(K,d,ae,be,J,i),this.emit("missingKey",K,d,ae,x)};this.options.saveMissing&&(this.options.saveMissingPlurals&&P?ue.forEach(K=>{const ae=this.pluralResolver.getSuffixes(K,i);F&&i[`defaultValue${this.options.pluralSeparator}zero`]&&ae.indexOf(`${this.options.pluralSeparator}zero`)<0&&ae.push(`${this.options.pluralSeparator}zero`),ae.forEach(pe=>{se([K],l+pe,i[`defaultValue${pe}`]||k)})}):se(ue,l,k))}x=this.extendTranslation(x,e,i,f,r),R&&x===l&&this.options.appendNamespaceToMissingKey&&(x=`${d}${u}${l}`),(R||X)&&this.options.parseMissingKeyHandler&&(x=this.options.parseMissingKeyHandler(this.options.appendNamespaceToMissingKey?`${d}${u}${l}`:l,X?x:void 0,i))}return s?(f.res=x,f.usedParams=this.getUsedParamsDetails(i),f):x}extendTranslation(e,n,r,i,s){if(this.i18nFormat?.parse)e=this.i18nFormat.parse(e,{...this.options.interpolation.defaultVariables,...r},r.lng||this.language||i.usedLng,i.usedNS,i.usedKey,{resolved:i});else if(!r.skipInterpolation){r.interpolation&&this.interpolator.init({...r,interpolation:{...this.options.interpolation,...r.interpolation}});const c=Bn(e)&&(r?.interpolation?.skipOnVariables!==void 0?r.interpolation.skipOnVariables:this.options.interpolation.skipOnVariables);let d;if(c){const m=e.match(this.interpolator.nestingRegexp);d=m&&m.length}let u=r.replace&&!Bn(r.replace)?r.replace:r;if(this.options.interpolation.defaultVariables&&(u={...this.options.interpolation.defaultVariables,...u}),e=this.interpolator.interpolate(e,u,r.lng||this.language||i.usedLng,r),c){const m=e.match(this.interpolator.nestingRegexp),p=m&&m.length;d<p&&(r.nest=!1)}!r.lng&&i&&i.res&&(r.lng=this.language||i.usedLng),r.nest!==!1&&(e=this.interpolator.nest(e,(...m)=>s?.[0]===m[0]&&!r.context?(this.logger.warn(`It seems you are nesting recursively key: ${m[0]} in key: ${n[0]}`),null):this.translate(...m,n),r)),r.interpolation&&this.interpolator.reset()}const o=r.postProcess||this.options.postProcess,l=Bn(o)?[o]:o;return e!=null&&l?.length&&r.applyPostProcessor!==!1&&(e=mQ.handle(l,e,n,this.options&&this.options.postProcessPassResolved?{i18nResolved:{...i,usedParams:this.getUsedParamsDetails(r)},...r}:r,this)),e}resolve(e,n={}){let r,i,s,o,l;return Bn(e)&&(e=[e]),e.forEach(c=>{if(this.isValidLookup(r))return;const d=this.extractFromKey(c,n),u=d.key;i=u;let m=d.namespaces;this.options.fallbackNS&&(m=m.concat(this.options.fallbackNS));const p=n.count!==void 0&&!Bn(n.count),f=p&&!n.ordinal&&n.count===0,x=n.context!==void 0&&(Bn(n.context)||typeof n.context=="number")&&n.context!=="",v=n.lngs?n.lngs:this.languageUtils.toResolveHierarchy(n.lng||this.language,n.fallbackLng);m.forEach(b=>{this.isValidLookup(r)||(l=b,!dH[`${v[0]}-${b}`]&&this.utils?.hasLoadedNamespace&&!this.utils?.hasLoadedNamespace(l)&&(dH[`${v[0]}-${b}`]=!0,this.logger.warn(`key "${i}" for languages "${v.join(", ")}" won't get resolved as namespace "${l}" was not yet loaded`,"This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!")),v.forEach(g=>{if(this.isValidLookup(r))return;o=g;const S=[u];if(this.i18nFormat?.addLookupKeys)this.i18nFormat.addLookupKeys(S,u,g,b,n);else{let P;p&&(P=this.pluralResolver.getSuffix(g,n.count,n));const C=`${this.options.pluralSeparator}zero`,A=`${this.options.pluralSeparator}ordinal${this.options.pluralSeparator}`;if(p&&(n.ordinal&&P.indexOf(A)===0&&S.push(u+P.replace(A,this.options.pluralSeparator)),S.push(u+P),f&&S.push(u+C)),x){const T=`${u}${this.options.contextSeparator||"_"}${n.context}`;S.push(T),p&&(n.ordinal&&P.indexOf(A)===0&&S.push(T+P.replace(A,this.options.pluralSeparator)),S.push(T+P),f&&S.push(T+C))}}let N;for(;N=S.pop();)this.isValidLookup(r)||(s=N,r=this.getResource(g,b,N,n))}))})}),{res:r,usedKey:i,exactUsedKey:s,usedLng:o,usedNS:l}}isValidLookup(e){return e!==void 0&&!(!this.options.returnNull&&e===null)&&!(!this.options.returnEmptyString&&e==="")}getResource(e,n,r,i={}){return this.i18nFormat?.getResource?this.i18nFormat.getResource(e,n,r,i):this.resourceStore.getResource(e,n,r,i)}getUsedParamsDetails(e={}){const n=["defaultValue","ordinal","context","replace","lng","lngs","fallbackLng","ns","keySeparator","nsSeparator","returnObjects","returnDetails","joinArrays","postProcess","interpolation"],r=e.replace&&!Bn(e.replace);let i=r?e.replace:e;if(r&&typeof e.count<"u"&&(i.count=e.count),this.options.interpolation.defaultVariables&&(i={...this.options.interpolation.defaultVariables,...i}),!r){i={...i};for(const s of n)delete i[s]}return i}static hasDefaultValue(e){const n="defaultValue";for(const r in e)if(Object.prototype.hasOwnProperty.call(e,r)&&n===r.substring(0,n.length)&&e[r]!==void 0)return!0;return!1}}class uH{constructor(e){this.options=e,this.supportedLngs=this.options.supportedLngs||!1,this.logger=jd.create("languageUtils")}getScriptPartFromCode(e){if(e=iw(e),!e||e.indexOf("-")<0)return null;const n=e.split("-");return n.length===2||(n.pop(),n[n.length-1].toLowerCase()==="x")?null:this.formatLanguageCode(n.join("-"))}getLanguagePartFromCode(e){if(e=iw(e),!e||e.indexOf("-")<0)return e;const n=e.split("-");return this.formatLanguageCode(n[0])}formatLanguageCode(e){if(Bn(e)&&e.indexOf("-")>-1){let n;try{n=Intl.getCanonicalLocales(e)[0]}catch{}return n&&this.options.lowerCaseLng&&(n=n.toLowerCase()),n||(this.options.lowerCaseLng?e.toLowerCase():e)}return this.options.cleanCode||this.options.lowerCaseLng?e.toLowerCase():e}isSupportedCode(e){return(this.options.load==="languageOnly"||this.options.nonExplicitSupportedLngs)&&(e=this.getLanguagePartFromCode(e)),!this.supportedLngs||!this.supportedLngs.length||this.supportedLngs.indexOf(e)>-1}getBestMatchFromCodes(e){if(!e)return null;let n;return e.forEach(r=>{if(n)return;const i=this.formatLanguageCode(r);(!this.options.supportedLngs||this.isSupportedCode(i))&&(n=i)}),!n&&this.options.supportedLngs&&e.forEach(r=>{if(n)return;const i=this.getScriptPartFromCode(r);if(this.isSupportedCode(i))return n=i;const s=this.getLanguagePartFromCode(r);if(this.isSupportedCode(s))return n=s;n=this.options.supportedLngs.find(o=>{if(o===s)return o;if(!(o.indexOf("-")<0&&s.indexOf("-")<0)&&(o.indexOf("-")>0&&s.indexOf("-")<0&&o.substring(0,o.indexOf("-"))===s||o.indexOf(s)===0&&s.length>1))return o})}),n||(n=this.getFallbackCodes(this.options.fallbackLng)[0]),n}getFallbackCodes(e,n){if(!e)return[];if(typeof e=="function"&&(e=e(n)),Bn(e)&&(e=[e]),Array.isArray(e))return e;if(!n)return e.default||[];let r=e[n];return r||(r=e[this.getScriptPartFromCode(n)]),r||(r=e[this.formatLanguageCode(n)]),r||(r=e[this.getLanguagePartFromCode(n)]),r||(r=e.default),r||[]}toResolveHierarchy(e,n){const r=this.getFallbackCodes((n===!1?[]:n)||this.options.fallbackLng||[],e),i=[],s=o=>{o&&(this.isSupportedCode(o)?i.push(o):this.logger.warn(`rejecting language code not found in supportedLngs: ${o}`))};return Bn(e)&&(e.indexOf("-")>-1||e.indexOf("_")>-1)?(this.options.load!=="languageOnly"&&s(this.formatLanguageCode(e)),this.options.load!=="languageOnly"&&this.options.load!=="currentOnly"&&s(this.getScriptPartFromCode(e)),this.options.load!=="currentOnly"&&s(this.getLanguagePartFromCode(e))):Bn(e)&&s(this.formatLanguageCode(e)),r.forEach(o=>{i.indexOf(o)<0&&s(this.formatLanguageCode(o))}),i}}const mH={zero:0,one:1,two:2,few:3,many:4,other:5},hH={select:t=>t===1?"one":"other",resolvedOptions:()=>({pluralCategories:["one","other"]})};class Eue{constructor(e,n={}){this.languageUtils=e,this.options=n,this.logger=jd.create("pluralResolver"),this.pluralRulesCache={}}addRule(e,n){this.rules[e]=n}clearCache(){this.pluralRulesCache={}}getRule(e,n={}){const r=iw(e==="dev"?"en":e),i=n.ordinal?"ordinal":"cardinal",s=JSON.stringify({cleanedCode:r,type:i});if(s in this.pluralRulesCache)return this.pluralRulesCache[s];let o;try{o=new Intl.PluralRules(r,{type:i})}catch{if(!Intl)return this.logger.error("No Intl support, please use an Intl polyfill!"),hH;if(!e.match(/-|_/))return hH;const c=this.languageUtils.getLanguagePartFromCode(e);o=this.getRule(c,n)}return this.pluralRulesCache[s]=o,o}needsPlural(e,n={}){let r=this.getRule(e,n);return r||(r=this.getRule("dev",n)),r?.resolvedOptions().pluralCategories.length>1}getPluralFormsOfKey(e,n,r={}){return this.getSuffixes(e,r).map(i=>`${n}${i}`)}getSuffixes(e,n={}){let r=this.getRule(e,n);return r||(r=this.getRule("dev",n)),r?r.resolvedOptions().pluralCategories.sort((i,s)=>mH[i]-mH[s]).map(i=>`${this.options.prepend}${n.ordinal?`ordinal${this.options.prepend}`:""}${i}`):[]}getSuffix(e,n,r={}){const i=this.getRule(e,r);return i?`${this.options.prepend}${r.ordinal?`ordinal${this.options.prepend}`:""}${i.select(n)}`:(this.logger.warn(`no plural rule found for: ${e}`),this.getSuffix("dev",n,r))}}const pH=(t,e,n,r=".",i=!0)=>{let s=_ue(t,e,n);return!s&&i&&Bn(n)&&(s=nF(t,n,r),s===void 0&&(s=nF(e,n,r))),s},MM=t=>t.replace(/\$/g,"$$$$");class Due{constructor(e={}){this.logger=jd.create("interpolator"),this.options=e,this.format=e?.interpolation?.format||(n=>n),this.init(e)}init(e={}){e.interpolation||(e.interpolation={escapeValue:!0});const{escape:n,escapeValue:r,useRawValueToEscape:i,prefix:s,prefixEscaped:o,suffix:l,suffixEscaped:c,formatSeparator:d,unescapeSuffix:u,unescapePrefix:m,nestingPrefix:p,nestingPrefixEscaped:f,nestingSuffix:x,nestingSuffixEscaped:v,nestingOptionsSeparator:b,maxReplaces:g,alwaysFormat:S}=e.interpolation;this.escape=n!==void 0?n:Nue,this.escapeValue=r!==void 0?r:!0,this.useRawValueToEscape=i!==void 0?i:!1,this.prefix=s?Ab(s):o||"{{",this.suffix=l?Ab(l):c||"}}",this.formatSeparator=d||",",this.unescapePrefix=u?"":m||"-",this.unescapeSuffix=this.unescapePrefix?"":u||"",this.nestingPrefix=p?Ab(p):f||Ab("$t("),this.nestingSuffix=x?Ab(x):v||Ab(")"),this.nestingOptionsSeparator=b||",",this.maxReplaces=g||1e3,this.alwaysFormat=S!==void 0?S:!1,this.resetRegExp()}reset(){this.options&&this.init(this.options)}resetRegExp(){const e=(n,r)=>n?.source===r?(n.lastIndex=0,n):new RegExp(r,"g");this.regexp=e(this.regexp,`${this.prefix}(.+?)${this.suffix}`),this.regexpUnescape=e(this.regexpUnescape,`${this.prefix}${this.unescapePrefix}(.+?)${this.unescapeSuffix}${this.suffix}`),this.nestingRegexp=e(this.nestingRegexp,`${this.nestingPrefix}((?:[^()"']+|"[^"]*"|'[^']*'|\\((?:[^()]|"[^"]*"|'[^']*')*\\))*?)${this.nestingSuffix}`)}interpolate(e,n,r,i){let s,o,l;const c=this.options&&this.options.interpolation&&this.options.interpolation.defaultVariables||{},d=f=>{if(f.indexOf(this.formatSeparator)<0){const g=pH(n,c,f,this.options.keySeparator,this.options.ignoreJSONStructure);return this.alwaysFormat?this.format(g,void 0,r,{...i,...n,interpolationkey:f}):g}const x=f.split(this.formatSeparator),v=x.shift().trim(),b=x.join(this.formatSeparator).trim();return this.format(pH(n,c,v,this.options.keySeparator,this.options.ignoreJSONStructure),b,r,{...i,...n,interpolationkey:v})};this.resetRegExp();const u=i?.missingInterpolationHandler||this.options.missingInterpolationHandler,m=i?.interpolation?.skipOnVariables!==void 0?i.interpolation.skipOnVariables:this.options.interpolation.skipOnVariables;return[{regex:this.regexpUnescape,safeValue:f=>MM(f)},{regex:this.regexp,safeValue:f=>this.escapeValue?MM(this.escape(f)):MM(f)}].forEach(f=>{for(l=0;s=f.regex.exec(e);){const x=s[1].trim();if(o=d(x),o===void 0)if(typeof u=="function"){const b=u(e,s,i);o=Bn(b)?b:""}else if(i&&Object.prototype.hasOwnProperty.call(i,x))o="";else if(m){o=s[0];continue}else this.logger.warn(`missed to pass in variable ${x} for interpolating ${e}`),o="";else!Bn(o)&&!this.useRawValueToEscape&&(o=iH(o));const v=f.safeValue(o);if(e=e.replace(s[0],v),m?(f.regex.lastIndex+=o.length,f.regex.lastIndex-=s[0].length):f.regex.lastIndex=0,l++,l>=this.maxReplaces)break}}),e}nest(e,n,r={}){let i,s,o;const l=(c,d)=>{const u=this.nestingOptionsSeparator;if(c.indexOf(u)<0)return c;const m=c.split(new RegExp(`${u}[ ]*{`));let p=`{${m[1]}`;c=m[0],p=this.interpolate(p,o);const f=p.match(/'/g),x=p.match(/"/g);((f?.length??0)%2===0&&!x||x.length%2!==0)&&(p=p.replace(/'/g,'"'));try{o=JSON.parse(p),d&&(o={...d,...o})}catch(v){return this.logger.warn(`failed parsing options string in nesting for key ${c}`,v),`${c}${u}${p}`}return o.defaultValue&&o.defaultValue.indexOf(this.prefix)>-1&&delete o.defaultValue,c};for(;i=this.nestingRegexp.exec(e);){let c=[];o={...r},o=o.replace&&!Bn(o.replace)?o.replace:o,o.applyPostProcessor=!1,delete o.defaultValue;const d=/{.*}/.test(i[1])?i[1].lastIndexOf("}")+1:i[1].indexOf(this.formatSeparator);if(d!==-1&&(c=i[1].slice(d).split(this.formatSeparator).map(u=>u.trim()).filter(Boolean),i[1]=i[1].slice(0,d)),s=n(l.call(this,i[1].trim(),o),o),s&&i[0]===e&&!Bn(s))return s;Bn(s)||(s=iH(s)),s||(this.logger.warn(`missed to resolve ${i[1]} for nesting ${e}`),s=""),c.length&&(s=c.reduce((u,m)=>this.format(u,m,r.lng,{...r,interpolationkey:i[1].trim()}),s.trim())),e=e.replace(i[0],s),this.regexp.lastIndex=0}return e}}const Fue=t=>{let e=t.toLowerCase().trim();const n={};if(t.indexOf("(")>-1){const r=t.split("(");e=r[0].toLowerCase().trim();const i=r[1].substring(0,r[1].length-1);e==="currency"&&i.indexOf(":")<0?n.currency||(n.currency=i.trim()):e==="relativetime"&&i.indexOf(":")<0?n.range||(n.range=i.trim()):i.split(";").forEach(o=>{if(o){const[l,...c]=o.split(":"),d=c.join(":").trim().replace(/^'+|'+$/g,""),u=l.trim();n[u]||(n[u]=d),d==="false"&&(n[u]=!1),d==="true"&&(n[u]=!0),isNaN(d)||(n[u]=parseInt(d,10))}})}return{formatName:e,formatOptions:n}},fH=t=>{const e={};return(n,r,i)=>{let s=i;i&&i.interpolationkey&&i.formatParams&&i.formatParams[i.interpolationkey]&&i[i.interpolationkey]&&(s={...s,[i.interpolationkey]:void 0});const o=r+JSON.stringify(s);let l=e[o];return l||(l=t(iw(r),i),e[o]=l),l(n)}},Rue=t=>(e,n,r)=>t(iw(n),r)(e);class Lue{constructor(e={}){this.logger=jd.create("formatter"),this.options=e,this.init(e)}init(e,n={interpolation:{}}){this.formatSeparator=n.interpolation.formatSeparator||",";const r=n.cacheInBuiltFormats?fH:Rue;this.formats={number:r((i,s)=>{const o=new Intl.NumberFormat(i,{...s});return l=>o.format(l)}),currency:r((i,s)=>{const o=new Intl.NumberFormat(i,{...s,style:"currency"});return l=>o.format(l)}),datetime:r((i,s)=>{const o=new Intl.DateTimeFormat(i,{...s});return l=>o.format(l)}),relativetime:r((i,s)=>{const o=new Intl.RelativeTimeFormat(i,{...s});return l=>o.format(l,s.range||"day")}),list:r((i,s)=>{const o=new Intl.ListFormat(i,{...s});return l=>o.format(l)})}}add(e,n){this.formats[e.toLowerCase().trim()]=n}addCached(e,n){this.formats[e.toLowerCase().trim()]=fH(n)}format(e,n,r,i={}){const s=n.split(this.formatSeparator);if(s.length>1&&s[0].indexOf("(")>1&&s[0].indexOf(")")<0&&s.find(l=>l.indexOf(")")>-1)){const l=s.findIndex(c=>c.indexOf(")")>-1);s[0]=[s[0],...s.splice(1,l)].join(this.formatSeparator)}return s.reduce((l,c)=>{const{formatName:d,formatOptions:u}=Fue(c);if(this.formats[d]){let m=l;try{const p=i?.formatParams?.[i.interpolationkey]||{},f=p.locale||p.lng||i.locale||i.lng||r;m=this.formats[d](l,f,{...u,...i,...p})}catch(p){this.logger.warn(p)}return m}else this.logger.warn(`there was no format function for ${d}`);return l},e)}}const Iue=(t,e)=>{t.pending[e]!==void 0&&(delete t.pending[e],t.pendingCount--)};class Oue extends KP{constructor(e,n,r,i={}){super(),this.backend=e,this.store=n,this.services=r,this.languageUtils=r.languageUtils,this.options=i,this.logger=jd.create("backendConnector"),this.waitingReads=[],this.maxParallelReads=i.maxParallelReads||10,this.readingCalls=0,this.maxRetries=i.maxRetries>=0?i.maxRetries:5,this.retryTimeout=i.retryTimeout>=1?i.retryTimeout:350,this.state={},this.queue=[],this.backend?.init?.(r,i.backend,i)}queueLoad(e,n,r,i){const s={},o={},l={},c={};return e.forEach(d=>{let u=!0;n.forEach(m=>{const p=`${d}|${m}`;!r.reload&&this.store.hasResourceBundle(d,m)?this.state[p]=2:this.state[p]<0||(this.state[p]===1?o[p]===void 0&&(o[p]=!0):(this.state[p]=1,u=!1,o[p]===void 0&&(o[p]=!0),s[p]===void 0&&(s[p]=!0),c[m]===void 0&&(c[m]=!0)))}),u||(l[d]=!0)}),(Object.keys(s).length||Object.keys(o).length)&&this.queue.push({pending:o,pendingCount:Object.keys(o).length,loaded:{},errors:[],callback:i}),{toLoad:Object.keys(s),pending:Object.keys(o),toLoadLanguages:Object.keys(l),toLoadNamespaces:Object.keys(c)}}loaded(e,n,r){const i=e.split("|"),s=i[0],o=i[1];n&&this.emit("failedLoading",s,o,n),!n&&r&&this.store.addResourceBundle(s,o,r,void 0,void 0,{skipCopy:!0}),this.state[e]=n?-1:2,n&&r&&(this.state[e]=0);const l={};this.queue.forEach(c=>{Sue(c.loaded,[s],o),Iue(c,e),n&&c.errors.push(n),c.pendingCount===0&&!c.done&&(Object.keys(c.loaded).forEach(d=>{l[d]||(l[d]={});const u=c.loaded[d];u.length&&u.forEach(m=>{l[d][m]===void 0&&(l[d][m]=!0)})}),c.done=!0,c.errors.length?c.callback(c.errors):c.callback())}),this.emit("loaded",l),this.queue=this.queue.filter(c=>!c.done)}read(e,n,r,i=0,s=this.retryTimeout,o){if(!e.length)return o(null,{});if(this.readingCalls>=this.maxParallelReads){this.waitingReads.push({lng:e,ns:n,fcName:r,tried:i,wait:s,callback:o});return}this.readingCalls++;const l=(d,u)=>{if(this.readingCalls--,this.waitingReads.length>0){const m=this.waitingReads.shift();this.read(m.lng,m.ns,m.fcName,m.tried,m.wait,m.callback)}if(d&&u&&i<this.maxRetries){setTimeout(()=>{this.read.call(this,e,n,r,i+1,s*2,o)},s);return}o(d,u)},c=this.backend[r].bind(this.backend);if(c.length===2){try{const d=c(e,n);d&&typeof d.then=="function"?d.then(u=>l(null,u)).catch(l):l(null,d)}catch(d){l(d)}return}return c(e,n,l)}prepareLoading(e,n,r={},i){if(!this.backend)return this.logger.warn("No backend was added via i18next.use. Will not load resources."),i&&i();Bn(e)&&(e=this.languageUtils.toResolveHierarchy(e)),Bn(n)&&(n=[n]);const s=this.queueLoad(e,n,r,i);if(!s.toLoad.length)return s.pending.length||i(),null;s.toLoad.forEach(o=>{this.loadOne(o)})}load(e,n,r){this.prepareLoading(e,n,{},r)}reload(e,n,r){this.prepareLoading(e,n,{reload:!0},r)}loadOne(e,n=""){const r=e.split("|"),i=r[0],s=r[1];this.read(i,s,"read",void 0,void 0,(o,l)=>{o&&this.logger.warn(`${n}loading namespace ${s} for language ${i} failed`,o),!o&&l&&this.logger.log(`${n}loaded namespace ${s} for language ${i}`,l),this.loaded(e,o,l)})}saveMissing(e,n,r,i,s,o={},l=()=>{}){if(this.services?.utils?.hasLoadedNamespace&&!this.services?.utils?.hasLoadedNamespace(n)){this.logger.warn(`did not save key "${r}" as the namespace "${n}" was not yet loaded`,"This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!");return}if(!(r==null||r==="")){if(this.backend?.create){const c={...o,isUpdate:s},d=this.backend.create.bind(this.backend);if(d.length<6)try{let u;d.length===5?u=d(e,n,r,i,c):u=d(e,n,r,i),u&&typeof u.then=="function"?u.then(m=>l(null,m)).catch(l):l(null,u)}catch(u){l(u)}else d(e,n,r,i,l,c)}!e||!e[0]||this.store.addResource(e[0],n,r,i)}}}const gH=()=>({debug:!1,initAsync:!0,ns:["translation"],defaultNS:["translation"],fallbackLng:["dev"],fallbackNS:!1,supportedLngs:!1,nonExplicitSupportedLngs:!1,load:"all",preload:!1,simplifyPluralSuffix:!0,keySeparator:".",nsSeparator:":",pluralSeparator:"_",contextSeparator:"_",partialBundledLanguages:!1,saveMissing:!1,updateMissing:!1,saveMissingTo:"fallback",saveMissingPlurals:!0,missingKeyHandler:!1,missingInterpolationHandler:!1,postProcess:!1,postProcessPassResolved:!1,returnNull:!1,returnEmptyString:!0,returnObjects:!1,joinArrays:!1,returnedObjectHandler:!1,parseMissingKeyHandler:!1,appendNamespaceToMissingKey:!1,appendNamespaceToCIMode:!1,overloadTranslationOptionHandler:t=>{let e={};if(typeof t[1]=="object"&&(e=t[1]),Bn(t[1])&&(e.defaultValue=t[1]),Bn(t[2])&&(e.tDescription=t[2]),typeof t[2]=="object"||typeof t[3]=="object"){const n=t[3]||t[2];Object.keys(n).forEach(r=>{e[r]=n[r]})}return e},interpolation:{escapeValue:!0,format:t=>t,prefix:"{{",suffix:"}}",formatSeparator:",",unescapePrefix:"-",nestingPrefix:"$t(",nestingSuffix:")",nestingOptionsSeparator:",",maxReplaces:1e3,skipOnVariables:!0},cacheInBuiltFormats:!0}),bH=t=>(Bn(t.ns)&&(t.ns=[t.ns]),Bn(t.fallbackLng)&&(t.fallbackLng=[t.fallbackLng]),Bn(t.fallbackNS)&&(t.fallbackNS=[t.fallbackNS]),t.supportedLngs?.indexOf?.("cimode")<0&&(t.supportedLngs=t.supportedLngs.concat(["cimode"])),typeof t.initImmediate=="boolean"&&(t.initAsync=t.initImmediate),t),e1=()=>{},zue=t=>{Object.getOwnPropertyNames(Object.getPrototypeOf(t)).forEach(n=>{typeof t[n]=="function"&&(t[n]=t[n].bind(t))})};class E0 extends KP{constructor(e={},n){if(super(),this.options=bH(e),this.services={},this.logger=jd,this.modules={external:[]},zue(this),n&&!this.isInitialized&&!e.isClone){if(!this.options.initAsync)return this.init(e,n),this;setTimeout(()=>{this.init(e,n)},0)}}init(e={},n){this.isInitializing=!0,typeof e=="function"&&(n=e,e={}),e.defaultNS==null&&e.ns&&(Bn(e.ns)?e.defaultNS=e.ns:e.ns.indexOf("translation")<0&&(e.defaultNS=e.ns[0]));const r=gH();this.options={...r,...this.options,...bH(e)},this.options.interpolation={...r.interpolation,...this.options.interpolation},e.keySeparator!==void 0&&(this.options.userDefinedKeySeparator=e.keySeparator),e.nsSeparator!==void 0&&(this.options.userDefinedNsSeparator=e.nsSeparator);const i=d=>d?typeof d=="function"?new d:d:null;if(!this.options.isClone){this.modules.logger?jd.init(i(this.modules.logger),this.options):jd.init(null,this.options);let d;this.modules.formatter?d=this.modules.formatter:d=Lue;const u=new uH(this.options);this.store=new cH(this.options.resources,this.options);const m=this.services;m.logger=jd,m.resourceStore=this.store,m.languageUtils=u,m.pluralResolver=new Eue(u,{prepend:this.options.pluralSeparator,simplifyPluralSuffix:this.options.simplifyPluralSuffix}),this.options.interpolation.format&&this.options.interpolation.format!==r.interpolation.format&&this.logger.deprecate("init: you are still using the legacy format function, please use the new approach: https://www.i18next.com/translation-function/formatting"),d&&(!this.options.interpolation.format||this.options.interpolation.format===r.interpolation.format)&&(m.formatter=i(d),m.formatter.init&&m.formatter.init(m,this.options),this.options.interpolation.format=m.formatter.format.bind(m.formatter)),m.interpolator=new Due(this.options),m.utils={hasLoadedNamespace:this.hasLoadedNamespace.bind(this)},m.backendConnector=new Oue(i(this.modules.backend),m.resourceStore,m,this.options),m.backendConnector.on("*",(f,...x)=>{this.emit(f,...x)}),this.modules.languageDetector&&(m.languageDetector=i(this.modules.languageDetector),m.languageDetector.init&&m.languageDetector.init(m,this.options.detection,this.options)),this.modules.i18nFormat&&(m.i18nFormat=i(this.modules.i18nFormat),m.i18nFormat.init&&m.i18nFormat.init(this)),this.translator=new wN(this.services,this.options),this.translator.on("*",(f,...x)=>{this.emit(f,...x)}),this.modules.external.forEach(f=>{f.init&&f.init(this)})}if(this.format=this.options.interpolation.format,n||(n=e1),this.options.fallbackLng&&!this.services.languageDetector&&!this.options.lng){const d=this.services.languageUtils.getFallbackCodes(this.options.fallbackLng);d.length>0&&d[0]!=="dev"&&(this.options.lng=d[0])}!this.services.languageDetector&&!this.options.lng&&this.logger.warn("init: no languageDetector is used and no lng is defined"),["getResource","hasResourceBundle","getResourceBundle","getDataByLanguage"].forEach(d=>{this[d]=(...u)=>this.store[d](...u)}),["addResource","addResources","addResourceBundle","removeResourceBundle"].forEach(d=>{this[d]=(...u)=>(this.store[d](...u),this)});const l=Fv(),c=()=>{const d=(u,m)=>{this.isInitializing=!1,this.isInitialized&&!this.initializedStoreOnce&&this.logger.warn("init: i18next is already initialized. You should call init just once!"),this.isInitialized=!0,this.options.isClone||this.logger.log("initialized",this.options),this.emit("initialized",this.options),l.resolve(m),n(u,m)};if(this.languages&&!this.isInitialized)return d(null,this.t.bind(this));this.changeLanguage(this.options.lng,d)};return this.options.resources||!this.options.initAsync?c():setTimeout(c,0),l}loadResources(e,n=e1){let r=n;const i=Bn(e)?e:this.language;if(typeof e=="function"&&(r=e),!this.options.resources||this.options.partialBundledLanguages){if(i?.toLowerCase()==="cimode"&&(!this.options.preload||this.options.preload.length===0))return r();const s=[],o=l=>{if(!l||l==="cimode")return;this.services.languageUtils.toResolveHierarchy(l).forEach(d=>{d!=="cimode"&&s.indexOf(d)<0&&s.push(d)})};i?o(i):this.services.languageUtils.getFallbackCodes(this.options.fallbackLng).forEach(c=>o(c)),this.options.preload?.forEach?.(l=>o(l)),this.services.backendConnector.load(s,this.options.ns,l=>{!l&&!this.resolvedLanguage&&this.language&&this.setResolvedLanguage(this.language),r(l)})}else r(null)}reloadResources(e,n,r){const i=Fv();return typeof e=="function"&&(r=e,e=void 0),typeof n=="function"&&(r=n,n=void 0),e||(e=this.languages),n||(n=this.options.ns),r||(r=e1),this.services.backendConnector.reload(e,n,s=>{i.resolve(),r(s)}),i}use(e){if(!e)throw new Error("You are passing an undefined module! Please check the object you are passing to i18next.use()");if(!e.type)throw new Error("You are passing a wrong module! Please check the object you are passing to i18next.use()");return e.type==="backend"&&(this.modules.backend=e),(e.type==="logger"||e.log&&e.warn&&e.error)&&(this.modules.logger=e),e.type==="languageDetector"&&(this.modules.languageDetector=e),e.type==="i18nFormat"&&(this.modules.i18nFormat=e),e.type==="postProcessor"&&mQ.addPostProcessor(e),e.type==="formatter"&&(this.modules.formatter=e),e.type==="3rdParty"&&this.modules.external.push(e),this}setResolvedLanguage(e){if(!(!e||!this.languages)&&!(["cimode","dev"].indexOf(e)>-1)){for(let n=0;n<this.languages.length;n++){const r=this.languages[n];if(!(["cimode","dev"].indexOf(r)>-1)&&this.store.hasLanguageSomeTranslations(r)){this.resolvedLanguage=r;break}}!this.resolvedLanguage&&this.languages.indexOf(e)<0&&this.store.hasLanguageSomeTranslations(e)&&(this.resolvedLanguage=e,this.languages.unshift(e))}}changeLanguage(e,n){this.isLanguageChangingTo=e;const r=Fv();this.emit("languageChanging",e);const i=l=>{this.language=l,this.languages=this.services.languageUtils.toResolveHierarchy(l),this.resolvedLanguage=void 0,this.setResolvedLanguage(l)},s=(l,c)=>{c?this.isLanguageChangingTo===e&&(i(c),this.translator.changeLanguage(c),this.isLanguageChangingTo=void 0,this.emit("languageChanged",c),this.logger.log("languageChanged",c)):this.isLanguageChangingTo=void 0,r.resolve((...d)=>this.t(...d)),n&&n(l,(...d)=>this.t(...d))},o=l=>{!e&&!l&&this.services.languageDetector&&(l=[]);const c=Bn(l)?l:l&&l[0],d=this.store.hasLanguageSomeTranslations(c)?c:this.services.languageUtils.getBestMatchFromCodes(Bn(l)?[l]:l);d&&(this.language||i(d),this.translator.language||this.translator.changeLanguage(d),this.services.languageDetector?.cacheUserLanguage?.(d)),this.loadResources(d,u=>{s(u,d)})};return!e&&this.services.languageDetector&&!this.services.languageDetector.async?o(this.services.languageDetector.detect()):!e&&this.services.languageDetector&&this.services.languageDetector.async?this.services.languageDetector.detect.length===0?this.services.languageDetector.detect().then(o):this.services.languageDetector.detect(o):o(e),r}getFixedT(e,n,r){const i=(s,o,...l)=>{let c;typeof o!="object"?c=this.options.overloadTranslationOptionHandler([s,o].concat(l)):c={...o},c.lng=c.lng||i.lng,c.lngs=c.lngs||i.lngs,c.ns=c.ns||i.ns,c.keyPrefix!==""&&(c.keyPrefix=c.keyPrefix||r||i.keyPrefix);const d=this.options.keySeparator||".";let u;return c.keyPrefix&&Array.isArray(s)?u=s.map(m=>(typeof m=="function"&&(m=rF(m,{...this.options,...o})),`${c.keyPrefix}${d}${m}`)):(typeof s=="function"&&(s=rF(s,{...this.options,...o})),u=c.keyPrefix?`${c.keyPrefix}${d}${s}`:s),this.t(u,c)};return Bn(e)?i.lng=e:i.lngs=e,i.ns=n,i.keyPrefix=r,i}t(...e){return this.translator?.translate(...e)}exists(...e){return this.translator?.exists(...e)}setDefaultNamespace(e){this.options.defaultNS=e}hasLoadedNamespace(e,n={}){if(!this.isInitialized)return this.logger.warn("hasLoadedNamespace: i18next was not initialized",this.languages),!1;if(!this.languages||!this.languages.length)return this.logger.warn("hasLoadedNamespace: i18n.languages were undefined or empty",this.languages),!1;const r=n.lng||this.resolvedLanguage||this.languages[0],i=this.options?this.options.fallbackLng:!1,s=this.languages[this.languages.length-1];if(r.toLowerCase()==="cimode")return!0;const o=(l,c)=>{const d=this.services.backendConnector.state[`${l}|${c}`];return d===-1||d===0||d===2};if(n.precheck){const l=n.precheck(this,o);if(l!==void 0)return l}return!!(this.hasResourceBundle(r,e)||!this.services.backendConnector.backend||this.options.resources&&!this.options.partialBundledLanguages||o(r,e)&&(!i||o(s,e)))}loadNamespaces(e,n){const r=Fv();return this.options.ns?(Bn(e)&&(e=[e]),e.forEach(i=>{this.options.ns.indexOf(i)<0&&this.options.ns.push(i)}),this.loadResources(i=>{r.resolve(),n&&n(i)}),r):(n&&n(),Promise.resolve())}loadLanguages(e,n){const r=Fv();Bn(e)&&(e=[e]);const i=this.options.preload||[],s=e.filter(o=>i.indexOf(o)<0&&this.services.languageUtils.isSupportedCode(o));return s.length?(this.options.preload=i.concat(s),this.loadResources(o=>{r.resolve(),n&&n(o)}),r):(n&&n(),Promise.resolve())}dir(e){if(e||(e=this.resolvedLanguage||(this.languages?.length>0?this.languages[0]:this.language)),!e)return"rtl";try{const i=new Intl.Locale(e);if(i&&i.getTextInfo){const s=i.getTextInfo();if(s&&s.direction)return s.direction}}catch{}const n=["ar","shu","sqr","ssh","xaa","yhd","yud","aao","abh","abv","acm","acq","acw","acx","acy","adf","ads","aeb","aec","afb","ajp","apc","apd","arb","arq","ars","ary","arz","auz","avl","ayh","ayl","ayn","ayp","bbz","pga","he","iw","ps","pbt","pbu","pst","prp","prd","ug","ur","ydd","yds","yih","ji","yi","hbo","men","xmn","fa","jpr","peo","pes","prs","dv","sam","ckb"],r=this.services?.languageUtils||new uH(gH());return e.toLowerCase().indexOf("-latn")>1?"ltr":n.indexOf(r.getLanguagePartFromCode(e))>-1||e.toLowerCase().indexOf("-arab")>1?"rtl":"ltr"}static createInstance(e={},n){const r=new E0(e,n);return r.createInstance=E0.createInstance,r}cloneInstance(e={},n=e1){const r=e.forkResourceStore;r&&delete e.forkResourceStore;const i={...this.options,...e,isClone:!0},s=new E0(i);if((e.debug!==void 0||e.prefix!==void 0)&&(s.logger=s.logger.clone(e)),["store","services","language"].forEach(l=>{s[l]=this[l]}),s.services={...this.services},s.services.utils={hasLoadedNamespace:s.hasLoadedNamespace.bind(s)},r){const l=Object.keys(this.store.data).reduce((c,d)=>(c[d]={...this.store.data[d]},c[d]=Object.keys(c[d]).reduce((u,m)=>(u[m]={...c[d][m]},u),c[d]),c),{});s.store=new cH(l,i),s.services.resourceStore=s.store}return s.translator=new wN(s.services,i),s.translator.on("*",(l,...c)=>{s.emit(l,...c)}),s.init(i,n),s.translator.options=i,s.translator.backendConnector.services.utils={hasLoadedNamespace:s.hasLoadedNamespace.bind(s)},s}toJSON(){return{options:this.options,store:this.store,language:this.language,languages:this.languages,resolvedLanguage:this.resolvedLanguage}}}const yo=E0.createInstance();yo.createInstance;yo.dir;yo.init;yo.loadResources;yo.reloadResources;yo.use;yo.changeLanguage;yo.getFixedT;yo.t;yo.exists;yo.setDefaultNamespace;yo.hasLoadedNamespace;yo.loadNamespaces;yo.loadLanguages;const Uue=(t,e,n,r)=>{const i=[n,{code:e,...r||{}}];if(t?.services?.logger?.forward)return t.services.logger.forward(i,"warn","react-i18next::",!0);ug(i[0])&&(i[0]=`react-i18next:: ${i[0]}`),t?.services?.logger?.warn?t.services.logger.warn(...i):console?.warn&&console.warn(...i)},xH={},pQ=(t,e,n,r)=>{ug(n)&&xH[n]||(ug(n)&&(xH[n]=new Date),Uue(t,e,n,r))},fQ=(t,e)=>()=>{if(t.isInitialized)e();else{const n=()=>{setTimeout(()=>{t.off("initialized",n)},0),e()};t.on("initialized",n)}},aF=(t,e,n)=>{t.loadNamespaces(e,fQ(t,n))},yH=(t,e,n,r)=>{if(ug(n)&&(n=[n]),t.options.preload&&t.options.preload.indexOf(e)>-1)return aF(t,n,r);n.forEach(i=>{t.options.ns.indexOf(i)<0&&t.options.ns.push(i)}),t.loadLanguages(e,fQ(t,r))},Bue=(t,e,n={})=>!e.languages||!e.languages.length?(pQ(e,"NO_LANGUAGES","i18n.languages were undefined or empty",{languages:e.languages}),!0):e.hasLoadedNamespace(t,{lng:n.lng,precheck:(r,i)=>{if(n.bindI18n&&n.bindI18n.indexOf("languageChanging")>-1&&r.services.backendConnector.backend&&r.isLanguageChangingTo&&!i(r.isLanguageChangingTo,t))return!1}}),ug=t=>typeof t=="string",Hue=t=>typeof t=="object"&&t!==null,que=/&(?:amp|#38|lt|#60|gt|#62|apos|#39|quot|#34|nbsp|#160|copy|#169|reg|#174|hellip|#8230|#x2F|#47);/g,$ue={"&amp;":"&","&#38;":"&","&lt;":"<","&#60;":"<","&gt;":">","&#62;":">","&apos;":"'","&#39;":"'","&quot;":'"',"&#34;":'"',"&nbsp;":" ","&#160;":" ","&copy;":"©","&#169;":"©","&reg;":"®","&#174;":"®","&hellip;":"…","&#8230;":"…","&#x2F;":"/","&#47;":"/"},Vue=t=>$ue[t],Gue=t=>t.replace(que,Vue);let iF={bindI18n:"languageChanged",bindI18nStore:"",transEmptyNodeValue:"",transSupportBasicHtmlNodes:!0,transWrapTextNodes:"",transKeepBasicHtmlNodesFor:["br","strong","i","p"],useSuspense:!0,unescape:Gue,transDefaultProps:void 0};const Wue=(t={})=>{iF={...iF,...t}},Kue=()=>iF;let gQ;const Xue=t=>{gQ=t},Yue=()=>gQ,Que={type:"3rdParty",init(t){Wue(t.options.react),Xue(t)}},Jue=w.createContext();class Zue{constructor(){this.usedNamespaces={}}addUsedNamespaces(e){e.forEach(n=>{this.usedNamespaces[n]||(this.usedNamespaces[n]=!0)})}getUsedNamespaces(){return Object.keys(this.usedNamespaces)}}var EM={exports:{}},DM={};var vH;function eme(){if(vH)return DM;vH=1;var t=Bg();function e(m,p){return m===p&&(m!==0||1/m===1/p)||m!==m&&p!==p}var n=typeof Object.is=="function"?Object.is:e,r=t.useState,i=t.useEffect,s=t.useLayoutEffect,o=t.useDebugValue;function l(m,p){var f=p(),x=r({inst:{value:f,getSnapshot:p}}),v=x[0].inst,b=x[1];return s(function(){v.value=f,v.getSnapshot=p,c(v)&&b({inst:v})},[m,f,p]),i(function(){return c(v)&&b({inst:v}),m(function(){c(v)&&b({inst:v})})},[m]),o(f),f}function c(m){var p=m.getSnapshot;m=m.value;try{var f=p();return!n(m,f)}catch{return!0}}function d(m,p){return p()}var u=typeof window>"u"||typeof window.document>"u"||typeof window.document.createElement>"u"?d:l;return DM.useSyncExternalStore=t.useSyncExternalStore!==void 0?t.useSyncExternalStore:u,DM}var wH;function bQ(){return wH||(wH=1,EM.exports=eme()),EM.exports}var MI=bQ();const tme=(t,e)=>ug(e)?e:Hue(e)&&ug(e.defaultValue)?e.defaultValue:Array.isArray(t)?t[t.length-1]:t,nme={t:tme,ready:!1},rme=()=>()=>{},_t=(t,e={})=>{const{i18n:n}=e,{i18n:r,defaultNS:i}=w.useContext(Jue)||{},s=n||r||Yue();s&&!s.reportNamespaces&&(s.reportNamespaces=new Zue),s||pQ(s,"NO_I18NEXT_INSTANCE","useTranslation: You will need to pass in an i18next instance by using initReactI18next");const o=w.useMemo(()=>({...Kue(),...s?.options?.react,...e}),[s,e]),{useSuspense:l,keyPrefix:c}=o,d=i||s?.options?.defaultNS,u=ug(d)?[d]:d||["translation"],m=w.useMemo(()=>u,u);s?.reportNamespaces?.addUsedNamespaces?.(m);const p=w.useRef(0),f=w.useCallback(k=>{if(!s)return rme;const{bindI18n:E,bindI18nStore:$}=o,z=()=>{p.current+=1,k()};return E&&s.on(E,z),$&&s.store.on($,z),()=>{E&&E.split(" ").forEach(X=>s.off(X,z)),$&&$.split(" ").forEach(X=>s.store.off(X,z))}},[s,o]),x=w.useRef(),v=w.useCallback(()=>{if(!s)return nme;const k=!!(s.isInitialized||s.initializedStoreOnce)&&m.every(ne=>Bue(ne,s,o)),E=e.lng||s.language,$=p.current,z=x.current;if(z&&z.ready===k&&z.lng===E&&z.keyPrefix===c&&z.revision===$)return z;const R={t:s.getFixedT(E,o.nsMode==="fallback"?m:m[0],c),ready:k,lng:E,keyPrefix:c,revision:$};return x.current=R,R},[s,m,c,o,e.lng]),[b,g]=w.useState(0),{t:S,ready:N}=MI.useSyncExternalStore(f,v,v);w.useEffect(()=>{if(s&&!N&&!l){const k=()=>g(E=>E+1);e.lng?yH(s,e.lng,m,k):aF(s,m,k)}},[s,e.lng,m,N,l,b]);const P=s||{},C=w.useRef(null),A=w.useRef(),T=k=>{const E=Object.getOwnPropertyDescriptors(k);E.__original&&delete E.__original;const $=Object.create(Object.getPrototypeOf(k),E);if(!Object.prototype.hasOwnProperty.call($,"__original"))try{Object.defineProperty($,"__original",{value:k,writable:!1,enumerable:!1,configurable:!1})}catch{}return $},F=w.useMemo(()=>{const k=P,E=k?.language;let $=k;k&&(C.current&&C.current.__original===k?A.current!==E?($=T(k),C.current=$,A.current=E):$=C.current:($=T(k),C.current=$,A.current=E));const z=[S,$,N];return z.t=S,z.i18n=$,z.ready=N,z},[S,P,N,P.resolvedLanguage,P.language,P.languages]);if(s&&l&&!N)throw new Promise(k=>{const E=()=>k();e.lng?yH(s,e.lng,m,E):aF(s,m,E)});return F},{slice:ame,forEach:ime}=[];function sme(t){return ime.call(ame.call(arguments,1),e=>{if(e)for(const n in e)t[n]===void 0&&(t[n]=e[n])}),t}function ome(t){return typeof t!="string"?!1:[/<\s*script.*?>/i,/<\s*\/\s*script\s*>/i,/<\s*img.*?on\w+\s*=/i,/<\s*\w+\s*on\w+\s*=.*?>/i,/javascript\s*:/i,/vbscript\s*:/i,/expression\s*\(/i,/eval\s*\(/i,/alert\s*\(/i,/document\.cookie/i,/document\.write\s*\(/i,/window\.location/i,/innerHTML/i].some(n=>n.test(t))}const SH=/^[\u0009\u0020-\u007e\u0080-\u00ff]+$/,lme=function(t,e){const r=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{path:"/"},i=encodeURIComponent(e);let s=`${t}=${i}`;if(r.maxAge>0){const o=r.maxAge-0;if(Number.isNaN(o))throw new Error("maxAge should be a Number");s+=`; Max-Age=${Math.floor(o)}`}if(r.domain){if(!SH.test(r.domain))throw new TypeError("option domain is invalid");s+=`; Domain=${r.domain}`}if(r.path){if(!SH.test(r.path))throw new TypeError("option path is invalid");s+=`; Path=${r.path}`}if(r.expires){if(typeof r.expires.toUTCString!="function")throw new TypeError("option expires is invalid");s+=`; Expires=${r.expires.toUTCString()}`}if(r.httpOnly&&(s+="; HttpOnly"),r.secure&&(s+="; Secure"),r.sameSite)switch(typeof r.sameSite=="string"?r.sameSite.toLowerCase():r.sameSite){case!0:s+="; SameSite=Strict";break;case"lax":s+="; SameSite=Lax";break;case"strict":s+="; SameSite=Strict";break;case"none":s+="; SameSite=None";break;default:throw new TypeError("option sameSite is invalid")}return r.partitioned&&(s+="; Partitioned"),s},_H={create(t,e,n,r){let i=arguments.length>4&&arguments[4]!==void 0?arguments[4]:{path:"/",sameSite:"strict"};n&&(i.expires=new Date,i.expires.setTime(i.expires.getTime()+n*60*1e3)),r&&(i.domain=r),document.cookie=lme(t,e,i)},read(t){const e=`${t}=`,n=document.cookie.split(";");for(let r=0;r<n.length;r++){let i=n[r];for(;i.charAt(0)===" ";)i=i.substring(1,i.length);if(i.indexOf(e)===0)return i.substring(e.length,i.length)}return null},remove(t,e){this.create(t,"",-1,e)}};var cme={name:"cookie",lookup(t){let{lookupCookie:e}=t;if(e&&typeof document<"u")return _H.read(e)||void 0},cacheUserLanguage(t,e){let{lookupCookie:n,cookieMinutes:r,cookieDomain:i,cookieOptions:s}=e;n&&typeof document<"u"&&_H.create(n,t,r,i,s)}},dme={name:"querystring",lookup(t){let{lookupQuerystring:e}=t,n;if(typeof window<"u"){let{search:r}=window.location;!window.location.search&&window.location.hash?.indexOf("?")>-1&&(r=window.location.hash.substring(window.location.hash.indexOf("?")));const s=r.substring(1).split("&");for(let o=0;o<s.length;o++){const l=s[o].indexOf("=");l>0&&s[o].substring(0,l)===e&&(n=s[o].substring(l+1))}}return n}},ume={name:"hash",lookup(t){let{lookupHash:e,lookupFromHashIndex:n}=t,r;if(typeof window<"u"){const{hash:i}=window.location;if(i&&i.length>2){const s=i.substring(1);if(e){const o=s.split("&");for(let l=0;l<o.length;l++){const c=o[l].indexOf("=");c>0&&o[l].substring(0,c)===e&&(r=o[l].substring(c+1))}}if(r)return r;if(!r&&n>-1){const o=i.match(/\/([a-zA-Z-]*)/g);return Array.isArray(o)?o[typeof n=="number"?n:0]?.replace("/",""):void 0}}}return r}};let jb=null;const kH=()=>{if(jb!==null)return jb;try{if(jb=typeof window<"u"&&window.localStorage!==null,!jb)return!1;const t="i18next.translate.boo";window.localStorage.setItem(t,"foo"),window.localStorage.removeItem(t)}catch{jb=!1}return jb};var mme={name:"localStorage",lookup(t){let{lookupLocalStorage:e}=t;if(e&&kH())return window.localStorage.getItem(e)||void 0},cacheUserLanguage(t,e){let{lookupLocalStorage:n}=e;n&&kH()&&window.localStorage.setItem(n,t)}};let Mb=null;const NH=()=>{if(Mb!==null)return Mb;try{if(Mb=typeof window<"u"&&window.sessionStorage!==null,!Mb)return!1;const t="i18next.translate.boo";window.sessionStorage.setItem(t,"foo"),window.sessionStorage.removeItem(t)}catch{Mb=!1}return Mb};var hme={name:"sessionStorage",lookup(t){let{lookupSessionStorage:e}=t;if(e&&NH())return window.sessionStorage.getItem(e)||void 0},cacheUserLanguage(t,e){let{lookupSessionStorage:n}=e;n&&NH()&&window.sessionStorage.setItem(n,t)}},pme={name:"navigator",lookup(t){const e=[];if(typeof navigator<"u"){const{languages:n,userLanguage:r,language:i}=navigator;if(n)for(let s=0;s<n.length;s++)e.push(n[s]);r&&e.push(r),i&&e.push(i)}return e.length>0?e:void 0}},fme={name:"htmlTag",lookup(t){let{htmlTag:e}=t,n;const r=e||(typeof document<"u"?document.documentElement:null);return r&&typeof r.getAttribute=="function"&&(n=r.getAttribute("lang")),n}},gme={name:"path",lookup(t){let{lookupFromPathIndex:e}=t;if(typeof window>"u")return;const n=window.location.pathname.match(/\/([a-zA-Z-]*)/g);return Array.isArray(n)?n[typeof e=="number"?e:0]?.replace("/",""):void 0}},bme={name:"subdomain",lookup(t){let{lookupFromSubdomainIndex:e}=t;const n=typeof e=="number"?e+1:1,r=typeof window<"u"&&window.location?.hostname?.match(/^(\w{2,5})\.(([a-z0-9-]{1,63}\.[a-z]{2,6})|localhost)/i);if(r)return r[n]}};let xQ=!1;try{document.cookie,xQ=!0}catch{}const yQ=["querystring","cookie","localStorage","sessionStorage","navigator","htmlTag"];xQ||yQ.splice(1,1);const xme=()=>({order:yQ,lookupQuerystring:"lng",lookupCookie:"i18next",lookupLocalStorage:"i18nextLng",lookupSessionStorage:"i18nextLng",caches:["localStorage"],excludeCacheFor:["cimode"],convertDetectedLanguage:t=>t});class vQ{constructor(e){let n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{};this.type="languageDetector",this.detectors={},this.init(e,n)}init(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{languageUtils:{}},n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{},r=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{};this.services=e,this.options=sme(n,this.options||{},xme()),typeof this.options.convertDetectedLanguage=="string"&&this.options.convertDetectedLanguage.indexOf("15897")>-1&&(this.options.convertDetectedLanguage=i=>i.replace("-","_")),this.options.lookupFromUrlIndex&&(this.options.lookupFromPathIndex=this.options.lookupFromUrlIndex),this.i18nOptions=r,this.addDetector(cme),this.addDetector(dme),this.addDetector(mme),this.addDetector(hme),this.addDetector(pme),this.addDetector(fme),this.addDetector(gme),this.addDetector(bme),this.addDetector(ume)}addDetector(e){return this.detectors[e.name]=e,this}detect(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.order,n=[];return e.forEach(r=>{if(this.detectors[r]){let i=this.detectors[r].lookup(this.options);i&&typeof i=="string"&&(i=[i]),i&&(n=n.concat(i))}}),n=n.filter(r=>r!=null&&!ome(r)).map(r=>this.options.convertDetectedLanguage(r)),this.services&&this.services.languageUtils&&this.services.languageUtils.getBestMatchFromCodes?n:n.length>0?n[0]:null}cacheUserLanguage(e){let n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:this.options.caches;n&&(this.options.excludeCacheFor&&this.options.excludeCacheFor.indexOf(e)>-1||n.forEach(r=>{this.detectors[r]&&this.detectors[r].cacheUserLanguage(e,this.options)}))}}vQ.type="languageDetector";const yme={nav:{printers:"Printers",archives:"Archives",queue:"Queue",stats:"Statistics",profiles:"Profiles",maintenance:"Maintenance",projects:"Projects",inventory:"Filament",files:"File Manager",makerworld:"MakerWorld",notifications:"Notifications",settings:"Settings",system:"System",collapseSidebar:"Collapse sidebar",expandSidebar:"Expand sidebar",update:"Update",updateAvailable:"Update available: v{{version}}",updateAvailableBanner:"Version {{version}} is available!",viewUpdate:"View update",viewOnGithub:"View on GitHub",keyboardShortcuts:"Keyboard shortcuts (?)",switchToLight:"Switch to light mode",switchToDark:"Switch to dark mode",smartSwitches:"Smart Switches",logout:"Logout"},common:{save:"Save",saving:"Saving...",cancel:"Cancel",delete:"Delete",edit:"Edit",add:"Add",close:"Close",confirm:"Confirm",loading:"Loading...",error:"Error",success:"Success",warning:"Warning",enabled:"Enabled",disabled:"Disabled",yes:"Yes",no:"No",on:"On",off:"Off",all:"All",none:"None",search:"Search",filter:"Filter",sort:"Sort",refresh:"Refresh",download:"Download",upload:"Upload",uploading:"Uploading...",uploadFailed:"Upload failed",actions:"Actions",status:"Status",name:"Name",description:"Description",date:"Date",time:"Time",hours:"hours",minutes:"minutes",seconds:"seconds",days:"days",enable:"Enable",disable:"Disable",permissions:"Permissions",noPrinters:"No printers configured",noData:"No data available",linkNotFound:"Link not found",required:"Required",optional:"Optional",dismiss:"Dismiss",apply:"Apply",reset:"Reset",export:"Export",import:"Import",clear:"Clear",selectAll:"Select All",deselectAll:"Deselect All",noChange:"— No change —",unchanged:"Unchanged",unassigned:"Unassigned",unknown:"Unknown",unknownError:"Unknown error",today:"Today",tomorrow:"Tomorrow",asap:"ASAP",overdue:"Overdue",now:"Now",collapse:"Collapse",expand:"Expand",viewArchive:"View archive",viewInFileManager:"View in File Manager",addedBy:"Added by {{username}}",prints:"prints",more:"+{{count}} more",ascending:"Ascending",descending:"Descending",back:"Back",copy:"Copy",copied:"Copied!",printer:"Printer",remove:"Remove",type:"Type",print:"Print",rename:"Rename",move:"Move",create:"Create",duplicate:"Duplicate",left:"Left",right:"Right"},printers:{title:"Printers",addPrinter:"Add Printer",editPrinter:"Edit Printer",deletePrinter:"Delete Printer",printerName:"Printer Name",serialNumber:"Serial Number",ipAddress:"IP Address / Hostname",accessCode:"Access Code",model:"Model",nozzleCount:"Nozzle Count",autoArchive:"Auto Archive",status:{available:"Available",idle:"Idle",printing:"Printing",paused:"Paused",offline:"Offline",problem:"Problem",error:"Error",finished:"Finished",unknown:"Unknown"},temperatures:{nozzle:"Nozzle",bed:"Bed",chamber:"Chamber"},progress:"{{percent}}% complete",timeRemaining:"{{time}} remaining",deleteConfirm:'Are you sure you want to delete "{{name}}"?',maintenanceOk:"Maintenance OK",maintenanceWarning:"{{count}} warning",maintenanceWarning_plural:"{{count}} warnings",maintenanceDue:"{{count}} due",maintenanceDue_plural:"{{count}} due",sort:{name:"Name",status:"Status",model:"Model",location:"Location",ascending:"Sort ascending",descending:"Sort descending"},cardSize:{small:"Small cards",medium:"Medium cards",large:"Large cards",extraLarge:"Extra large cards"},hideOffline:"Hide offline",nextAvailable:"Next available",powerOn:"Power On",offlinePrintersWithPlugs:"Offline printers with smart plugs",noPrintersConfigured:"No printers configured yet",search:"Search printers...",noSearchResults:"No printers match your search or filters",filter:{allStatuses:"All statuses",allLocations:"All locations"},readyToPrint:"Ready to print",external:"External",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Delete print archives",noLabel:"No label",printPreview:"Print preview",width:"Width",height:"Height",noObjectsFound:"No objects found",objectsLoadedOnPrintStart:"Objects are loaded when a print starts",willBeSkipped:"Will be skipped",name:"Name",serialCannotBeChanged:"Serial number cannot be changed",locationHelp:"Used to group printers and filter queue jobs",wifiSignal:{veryWeak:"Very weak",weak:"Weak",fair:"Fair",good:"Good",excellent:"Excellent"},maintenanceUpToDate:"All maintenance up to date - Click to view",chamberLightOn:"Turn on chamber light",chamberLightOff:"Turn off chamber light",files:"Files",browseFiles:"Browse printer files",autoOffAfterPrint:"Auto power-off after print",autoOffExecuted:"Auto-off was executed - turn printer on to reset",hmsErrors:"HMS Errors",viewHmsErrors:"View {{count}} HMS error(s)",resume:"Resume",pause:"Pause",stop:"Stop",camera:"Camera",skipObject:"Skip Object",reconnect:"Reconnect",forceRefresh:"Force Refresh",forceRefreshSuccess:"Refresh requested",mqttDebug:"MQTT Debug",printerInformation:"Printer Information",copyToClipboard:"Copy",copied:"Copied!",state:"State",wifiSignalLabel:"WiFi Signal",developerMode:"Developer Mode",enabled:"Enabled",disabled:"Disabled",addedOn:"Added",sdCard:"SD Card",inserted:"Inserted",notInserted:"Not inserted",totalPrintHours:"Print Hours",activeNozzle:"Active: {{nozzle}} nozzle",nozzleRack:"Nozzle Rack",nozzleDocked:"Docked",nozzleMounted:"Mounted",nozzleActive:"Active",nozzleIdle:"Idle",nozzleDiameter:"Diameter",nozzleType:"Type",nozzleStatus:"Status",nozzleFilament:"Filament",nozzleWear:"Wear",nozzleMaxTemp:"Max Temp",nozzleSerial:"Serial",nozzleHardenedSteel:"Hardened Steel",nozzleStainlessSteel:"Stainless Steel",nozzleTungstenCarbide:"Tungsten Carbide",nozzleFlow:"Flow",nozzleHighFlow:"High Flow",nozzleStandardFlow:"Standard",firmwareUpdate:"Firmware Update",firmwareInstructions:"On the printer's touchscreen, go to",firmwareNav:"Navigate to",settings:"Settings",firmware:"Firmware",discoverPrinters:"Discover Printers",searching:"Searching...",manualEntry:"Manual Entry",addFromCloud:"Add from Cloud",toast:{printerDeleted:"Printer deleted",missingSpoolAssignment:"Print started on {{printer}}. Missing spool assignment for: {{slots}}",printerAdded:"Printer added",printerUpdated:"Printer updated",failedToDelete:"Failed to delete printer",failedToAdd:"Failed to add printer",failedToUpdate:"Failed to update printer",commandSent:"Command sent",failedToSendCommand:"Failed to send command",turnedOn:"{{name}} turned on",failedToPowerOn:"Failed to power on {{name}}",scriptTriggered:"Script triggered",printStopped:"Print stopped",printPaused:"Print paused",printResumed:"Print resumed",referenceDeleted:"Reference deleted",detectionAreaSaved:"Detection area saved",failedToRunScript:"Failed to run script",failedToStopPrint:"Failed to stop print",failedToPausePrint:"Failed to pause print",failedToResumePrint:"Failed to resume print",failedToControlChamberLight:"Failed to control chamber light",failedToSetSpeed:"Failed to set print speed",failedToUpdateSetting:"Failed to update setting",failedToSkipObjects:"Failed to skip objects",failedToRereadRfid:"Failed to re-read RFID",failedToCheckPlate:"Failed to check plate",failedToUpdateLabel:"Failed to update label",failedToDeleteReference:"Failed to delete reference",failedToSaveDetectionArea:"Failed to save detection area",plateCheckEnabled:"Plate check enabled",plateCheckDisabled:"Plate check disabled",calibrationSaved:"Calibration saved!",calibrationFailed:"Calibration failed",rfidRereadInitiated:"RFID re-read initiated"},connection:{connected:"Connected",offline:"Offline"},plateStatus:{markCleared:"Mark plate as cleared",cleared:"Plate Clear",notCleared:"Plate not Clear",inUse:"Plate in Use"},queue:{inQueue:"{{count}} print in queue",inQueue_plural:"{{count}} prints in queue"},controls:"Controls",rfid:{reread:"Re-read RFID"},bedJog:{title:"Move build plate",bed:"Bed",step:"Step (mm)",up:"Move plate up",down:"Move plate down",disabledWhilePrinting:"Disabled while printing",notHomedTitle:"Printer is not homed",notHomedMessage:"The printer has not been homed since the last print. Run auto-home first for safe positioning (parks the toolhead, then homes X, Y, and Z), or move anyway — soft endstops will be bypassed.",homeZ:"Auto Home",moveAnyway:"Move anyway",homingStarted:"Auto-homing printer…"},permission:{noAdd:"You do not have permission to add printers",noEdit:"You do not have permission to edit printers",noDelete:"You do not have permission to delete printers",noControl:"You do not have permission to control printers",noFiles:"You do not have permission to access printer files",noAmsRfid:"You do not have permission to re-read AMS RFID",noSmartPlugControl:"You do not have permission to control smart plugs",noCamera:"You do not have permission to view cameras"},modal:{addTitle:"Add Printer",editTitle:"Edit Printer",myPrinter:"My Printer",selectModel:"Select model...",locationGroup:"Location / Group (optional)",locationPlaceholder:"e.g., Workshop, Office, Basement",autoArchiveLabel:"Auto-archive completed prints",fromPrinterSettings:"From printer settings",modelOptional:"Model (optional)",saveChanges:"Save Changes"},skipObjects:{tooltip:"Skip objects",onlyWhilePrinting:"Skip objects (only while printing)",requiresMultiple:"Skip objects (requires 2+ objects)",title:"Skip Objects",matchIdsInfo:"Match IDs with your printer display",printerShowsIds:"The printer screen shows object IDs on the build plate",skipSelected:"Skip Selected",skipping:"Skipping...",noObjectsSelected:"No objects selected",selectObjectsToSkip:"Select objects you want to skip from the current print",skipped:"skipped",objectsSkipped:"Objects skipped",activeCount:"{{count}} active",waitForLayer:"Wait for layer 2+ to skip objects (currently layer {{layer}})",skip:"Skip",confirmTitle:"Skip Object?",confirmMessage:'Are you sure you want to skip "{{name}}"? This cannot be undone.'},confirm:{deleteTitle:"Delete Printer",deleteMessage:'Are you sure you want to delete "{{name}}"? This will remove all connection settings.',deleteArchivesNote:"All print history for this printer will be permanently deleted.",keepArchivesNote:"Print history will be kept but no longer associated with this printer.",stopTitle:"Stop Print",stopMessage:'Are you sure you want to stop the current print on "{{name}}"? This will cancel the print job.',stopButton:"Stop Print",pauseTitle:"Pause Print",pauseMessage:'Are you sure you want to pause the current print on "{{name}}"?',pauseButton:"Pause Print",resumeTitle:"Resume Print",resumeMessage:'Are you sure you want to resume the print on "{{name}}"?',resumeButton:"Resume Print",powerOnTitle:"Power On Printer",powerOnMessage:'Are you sure you want to turn ON the power for "{{name}}"?',powerOnButton:"Power On",powerOffTitle:"Power Off Printer",powerOffMessage:'Are you sure you want to turn OFF the power for "{{name}}"?',powerOffWarning:'WARNING: "{{name}}" is currently printing! Are you sure you want to turn OFF the power? This will interrupt the print and may damage the printer.',powerOffButton:"Power Off"},bulk:{select:"Select",selectAll:"Select All",selectByLocation:"Select by Location",selected:"{{count}} selected",actions:{stop:"Stop",pause:"Pause",resume:"Resume",clearPlate:"Clear Bed",clearHMS:"Clear Notifications"},confirm:{stopTitle:"Stop {{count}} Prints",stopMessage:"This will cancel active prints on {{count}} printer(s). This action cannot be undone.",stopButton:"Stop All",pauseTitle:"Pause {{count}} Prints",pauseMessage:"This will pause active prints on {{count}} printer(s).",pauseButton:"Pause All",clearPlateTitle:"Clear {{count}} Print Beds",clearPlateMessage:"This will clear the print bed on {{count}} printer(s) and may trigger queued jobs.",clearPlateButton:"Clear All"},success:"{{action}} completed on {{count}} printer(s)",partial:"{{succeeded}} succeeded, {{failed}} failed",noneApplicable:"No selected printers are in the right state for this action",selectByState:"Select by State"},discovery:{title:"Discover Printers",searching:"Searching...",scanning:"Scanning...",scanProgress:"Scanning... {{scanned}}/{{total}}",foundPrinters:"Found {{count}} printer(s)",noPrintersFound:"No printers found",noPrintersFoundSubnet:"No printers found in the specified subnet.",noPrintersFoundNetwork:"No printers found on the network.",allConfigured:"All discovered printers are already configured.",alreadyAdded:"Already added",select:"Select",manualEntry:"Manual Entry",addFromCloud:"Add from Cloud",subnetToScan:"Subnet to scan",dockerNote:"Docker detected. Enter your printer's subnet in CIDR notation. Requires network_mode: host in docker-compose.yml.",scanSubnet:"Scan Subnet for Printers",discoverNetwork:"Discover Printers on Network",scanningSubnet:"Scanning subnet for Bambu printers...",scanningNetwork:"Scanning network...",serialRequired:"Serial required",unknown:"Unknown",failedToStart:"Failed to start discovery"},drying:{start:"Start Drying",stop:"Stop Drying",temperature:"Temperature",duration:"Duration",hours:"hours",timeRemaining:"{{time}} left",active:"Drying",notSupported:"Drying not supported",powerRequired:"Connect AMS power adapter to enable drying",startingDrying:"Starting drying...",stoppingDrying:"Stopping drying...",rotateTray:"Rotate spool during drying"},filaments:"Filaments",openCameraOverlay:"Open camera overlay",openCameraWindow:"Open camera in new window",firmwareUpdateAvailable:"Firmware update available: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Up to date",firmwareUpdateButton:"Update",plateDetection:{noPermission:"You do not have permission to update printers",enabledClick:"Plate check enabled - Click to disable",disabledClick:"Plate check disabled - Click to enable",manageCalibration:"Manage plate detection calibration",calibrationRequired:"Calibration Required",calibrationInstructions:"Please ensure the build plate is <strong>completely empty</strong>, then click Calibrate.",calibrationDescription:"Calibration captures a reference image of the empty plate. Future checks will compare against this reference to detect objects.",calibrationTip:"<strong>Tip:</strong> You can store up to 5 calibrations for different plates. The system automatically uses the best match when checking.",plateEmpty:"Plate appears empty",objectsDetected:"Objects detected on plate",confidence:"Confidence",difference:"Difference",analysisPreview:"Analysis preview:",analysisLegend:"Green box = detection area, Red overlay = differences from calibration",savedReferences:"Saved References ({{count}}/{{max}})",deleteReference:"Delete reference",labelPlaceholder:"Label...",clickToEdit:"{{label}} - Click to edit",clickToAddLabel:"Click to add label"},speed:{title:"Print Speed",silent:"Silent (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Airduct Mode",cooling:"Cooling",heating:"Heating"},noSdCard:"No SD",door:{open:"Open",closed:"Closed"},fans:{partCooling:"Part Cooling Fan",auxiliary:"Auxiliary Fan",chamber:"Chamber Fan"},clickToViewHmsErrors:"Click to view HMS errors",estimatedCompletion:"Estimated completion time",plateNumber:"Plate {{number}}",slotOptions:"Slot options",amsPopup:{friendlyName:"AMS Name",friendlyNamePlaceholder:"e.g. AMS Friendly Name",serialNumber:"Serial Number",firmwareVersion:"Firmware",save:"Save",clear:"Clear",noEditPermission:"You do not have permission to rename AMS units"},firmwareModal:{title:"Firmware Update",titleUpToDate:"Firmware Info",currentVersion:"Current:",latestVersion:"Latest:",releaseNotes:"Release Notes",checkingPrereqs:"Checking prerequisites...",sdCardReady:"SD card ready. Click below to upload firmware.",uploadedSuccess:"Firmware uploaded to SD card!",applyInstructions:"To apply the update on your printer:",step1:"On the printer's touchscreen, go to <strong>Settings</strong>",step2:"Navigate to <strong>Firmware</strong>",step3:"Select <strong>Update from SD card</strong>",step4:"The update will take 10-20 minutes",done:"Done",starting:"Starting...",uploadFirmware:"Upload Firmware",uploadFailed:"Failed to start upload: {{error}}",uploadedToast:"Firmware uploaded! Trigger update from printer screen.",availableVersions:"Available versions",usable:"Usable",unavailable:"Unavailable",installed:"Installed",newerBadge:"newer",olderBadge:"older",currentBadge:"current"},accessCodePlaceholder:"Leave empty to keep current",roi:{title:"Detection Area (ROI)",xStart:"X Start",yStart:"Y Start",width:"Width",height:"Height",instruction:"Adjust the detection area to focus on the build plate. The green box in the preview shows the current area."},developerModeWarning:"Developer LAN mode is not enabled on: {{names}}. Some features may not work.",howToEnable:"How to enable",incompatibleFile:"This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}",dropNotPrintable:"Only .gcode and .gcode.3mf files can be printed",dropToPrint:"Drop to print",cannotPrint:"Printer busy"},archives:{title:"Print Archives",searchPlaceholder:"Search archives...",filterByPrinter:"Filter by printer",filterByStatus:"Filter by status",sortBy:"Sort by",sortNewest:"Newest first",sortOldest:"Oldest first",sortName:"Name",sortDuration:"Duration",sortLargest:"Largest first",sortSmallest:"Smallest first",sortSize:"Size",noArchives:"No archives found",noArchivesSearch:"No archives match your search",originalPrintNotVisible:"Original print not visible - try clearing filters",noArchivesYet:"No archives yet",prints:"prints",pagination:{showing:"Showing",to:"to",of:"of",show:"Show",page:"Page",all:"All"},loadingArchives:"Loading archives...",releaseToUpload:"Release to upload",showAll:"Show all",showFavoritesOnly:"Show favorites only",gridView:"Grid view",listView:"List view",calendarView:"Calendar view",logView:"Print Log",manageTags:"Manage Tags",showFailedPrints:"Show failed prints",hideFailedPrints:"Hide failed prints",hideDuplicates:"Hide Duplicates",viewOriginalPrint:"Click to view original print (#{{id}})",printTime:"Print Time",filamentUsed:"Filament Used",cost:"Cost",reprint:"Reprint",preview:"Preview",deleteArchive:"Delete Archive",deleteConfirm:"Are you sure you want to delete this archive?",favorite:"Favorite",unfavorite:"Remove from favorites",viewDetails:"View Details",status:{completed:"Completed",failed:"Failed",stopped:"Stopped"},toast:{source3mfAttached:"Source 3MF attached: {{filename}}",failedUploadSource3mf:"Failed to upload source 3MF",source3mfRemoved:"Source 3MF removed",failedRemoveSource3mf:"Failed to remove source 3MF",f3dAttached:"F3D attached: {{filename}}",failedUploadF3d:"Failed to upload F3D",f3dRemoved:"F3D removed",failedRemoveF3d:"Failed to remove F3D",timelapseAttached:"Timelapse attached: {{filename}}",timelapseAlreadyAttached:"Timelapse already attached",noMatchingTimelapse:"No matching timelapse found",failedScanTimelapse:"Failed to scan for timelapse",failedAttachTimelapse:"Failed to attach timelapse",timelapseRemoved:"Timelapse removed",failedRemoveTimelapse:"Failed to remove timelapse",timelapseUploaded:"Timelapse uploaded: {{filename}}",failedUploadTimelapse:"Failed to upload timelapse",archiveDeleted:"Archive deleted",failedDeleteArchive:"Failed to delete archive",addedToFavorites:"Added to favorites",removedFromFavorites:"Removed from favorites",projectUpdated:"Project updated",failedUpdateProject:"Failed to update project",linkCopied:"Link copied to clipboard",failedCopyLink:"Failed to copy link",photoDeleted:"Photo deleted",failedDeletePhoto:"Failed to delete photo",failedDeleteArchives:"Failed to delete archives",failedUpdateFavorites:"Failed to update favorites",exportDownloaded:"Export downloaded",exportFailed:"Export failed"},menu:{print:"Print",schedule:"Schedule",openInBambuStudio:"Open in Slicer",slice:"Slice",externalLink:"External Link",viewOnMakerWorld:"View on MakerWorld",preview3d:"3D Preview",viewTimelapse:"View Timelapse",scanForTimelapse:"Scan for Timelapse",uploadTimelapse:"Upload Timelapse",removeTimelapse:"Remove Timelapse",downloadSource3mf:"Download Source 3MF",uploadSource3mf:"Upload Source 3MF",replaceSource3mf:"Replace Source 3MF",removeSource3mf:"Remove Source 3MF",uploadF3d:"Upload F3D",replaceF3d:"Replace F3D",downloadF3d:"Download F3D",removeF3d:"Remove F3D",download:"Download",copyDownloadLink:"Copy Download Link",qrCode:"QR Code",viewPhotos:"View Photos",viewPhotosCount:"View Photos ({{count}})",projectPage:"Project Page",addToFavorites:"Add to Favorites",removeFromFavorites:"Remove from Favorites",edit:"Edit",goToProject:"Go to Project: {{name}}",addToProject:"Add to Project",removeFromProject:"Remove from Project",loading:"Loading...",noProjectsAvailable:"No projects available",searchProjects:"Search projects…",select:"Select",deselect:"Deselect",delete:"Delete"},permission:{noReprint:"You do not have permission to reprint this archive",noAddToQueue:"You do not have permission to add to queue",noUpdateArchives:"You do not have permission to update archives",noUploadFiles:"You do not have permission to upload files",noDownload:"You do not have permission to download archives",noCopyLink:"You do not have permission to copy download links",noDelete:"You do not have permission to delete this archive",noCreate:"You do not have permission to create archives"},platePicker:{title:"Select plate to preview",hint:"This archive has multiple plates. Pick one to open in the GCode viewer.",plateLabel:"Plate {{index}}",objectCount:"{{count}} object",objectCount_plural:"{{count}} objects",noGcode:"This archive has no sliced G-code to preview. Open it in Bambu Studio to slice first."},card:{previousPlate:"Previous plate",nextPlate:"Next plate",plateNumber:"Plate {{index}}",moreOptions:"Right-click for more options",addToFavorites:"Add to favorites",removeFromFavorites:"Remove from favorites",cancelled:"cancelled",failed:"failed",duplicate:"duplicate",duplicateTitle:"This model has been printed before",openSource3mf:"Open source 3MF in Bambu Studio (right-click for more options)",downloadF3d:"Download Fusion 360 design file",viewTimelapse:"View timelapse",viewPhoto:"View 1 photo",viewPhotos:"View {{count}} photos",openFolder:"Open folder: {{name}}",slicedFile:"Sliced file - ready to print",sourceFile:"Source file only - no AMS mapping available",gcode:"GCODE",source:"SOURCE",project:"Project: {{name}}",estimated:"Estimated: {{time}}",actual:"Actual: {{time}}",accuracy:"Accuracy: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} layer",layers:"{{count}} layers",object:"{{count}} object",objects:"{{count}} objects",slicedFor:"Sliced for {{model}}",uploadedBy:"Uploaded By",noPermissionReprint:"You do not have permission to reprint",noFileForReprint:"No 3MF file available — the file could not be downloaded from the printer when the print was recorded",noPermissionEdit:"You do not have permission to edit archives",noPermissionDelete:"You do not have permission to delete archives",reprint:"Reprint",schedulePrint:"Schedule Print",schedule:"Schedule",openInBambuStudio:"Open in Slicer",openInBambuStudioToSlice:"Open in Slicer to slice",slice:"Slice",externalLink:"External Link",makerWorld:"MakerWorld: {{designer}}",viewProject:"View project",noExternalLink:"No external link",preview3d:"3D Preview",download:"Download",edit:"Edit",delete:"Delete"},modal:{deleteArchive:"Delete Archive",deleteConfirm:'Are you sure you want to delete "{{name}}"? This action cannot be undone.',deleteButton:"Delete",removeSource3mf:"Remove Source 3MF",removeSource3mfConfirm:'Are you sure you want to remove the source 3MF file from "{{name}}"? This will delete the original slicer project file.',removeButton:"Remove",removeF3d:"Remove F3D",removeF3dConfirm:'Are you sure you want to remove the Fusion 360 design file from "{{name}}"?',removeTimelapse:"Remove Timelapse",removeTimelapseConfirm:'Are you sure you want to remove the timelapse video from "{{name}}"?',timelapse:"{{name}} - Timelapse",selectTimelapse:"Select Timelapse",selectTimelapseDesc:"No auto-match found. Select the timelapse for this print:",deleteArchives:"Delete Archives",deleteArchivesConfirm:"Are you sure you want to delete {{count}} archive(s)? This action cannot be undone.",deleteCount:"Delete {{count}}"},page:{title:"Archives",printsCount:"{{filtered}} of {{total}} prints",dropFilesHere:"Drop .3mf files here",releaseToUpload:"Release to upload",only3mfSupported:"Only .3mf files are supported",close:"Close",selected:"{{count}} selected",selectAll:"Select All",tags:"Tags",project:"Project",favorite:"Favorite",delete:"Delete",toggledFavorites:"Toggled favorites for {{count}} archive(s)",failedUpdateFavorites:"Failed to update favorites",archivesDeleted:"{{count}} archive(s) deleted",failedDeleteArchives:"Failed to delete archives",photoDeleted:"Photo deleted",failedDeletePhoto:"Failed to delete photo"},list:{name:"Name",printer:"Printer",date:"Date",size:"Size",actions:"Actions",hasTimelapse:"Has timelapse"},log:{date:"Date",printName:"Print Name",printer:"Printer",user:"User",status:"Status",duration:"Duration",filament:"Filament",allPrinters:"All Printers",allUsers:"All Users",allStatuses:"All Statuses",cancelled:"Cancelled",skipped:"Skipped",dateFrom:"From",dateTo:"To",noEntries:"No print log entries found",showing:"Showing {{count}} of {{total}} entries",rowsPerPage:"Rows",page:"Page",prev:"Prev",next:"Next",clearLog:"Clear Log",clearLogTitle:"Clear Print Log",clearLogConfirm:"All print log entries will be permanently deleted. Archives and queue items are not affected. This action cannot be undone. Are you sure?",clearLogButton:"Clear All",cleared:"{{count}} log entries cleared",clearFailed:"Failed to clear print log"}},queue:{title:"Print Queue",subtitle:"Schedule and manage your print jobs",addToQueue:"Add to Queue",print:"Print",reprint:"Re-print",schedulePrint:"Schedule Print",editQueueItem:"Edit Queue Item",printToPrinters:"Print to {{count}} Printers",queueToPrinters:"Queue to {{count}} Printers",queueSelectedPlates:"Queue {{count}} Plates",selectAllPlates:"Select All {{count}} Plates",deselectAll:"Deselect All",printQueued:"Print queued",itemsQueued:"{{count}} items queued",sending:"Sending...",sendingProgress:"Sending {{current}}/{{total}}...",adding:"Adding...",addingProgress:"Adding {{current}}/{{total}}...",savingProgress:"Saving {{current}}/{{total}}...",clearQueue:"Clear Queue",clearHistory:"Clear History",emptyQueue:"Queue is empty",position:"Position",scheduledTime:"Scheduled Time",moveUp:"Move Up",moveDown:"Move Down",startNow:"Start Now",printingInProgress:"Printing in progress...",viewArchive:"View archive",viewInFileManager:"View in File Manager",itemCount:"{{count}} item",itemCount_plural:"{{count}} items",dragToReorder:"Drag to reorder (ASAP only)",reorderHint:"Position only affects ASAP items. Scheduled items run at their set time.",sjf:{label:"SJF",tooltip:"Shortest Job First — scheduler prioritizes shorter prints"},addedBy:"Added by {{name}}",nextInQueue:"Next in queue",clearPlateSuccess:"Plate cleared — ready for next print",plateNumber:"Plate {{index}}",quantity:"Quantity",quantityHint:"Creates {{count}} queue items",activeBatches:"Active Batches",batchProgress:"{{completed}} of {{total}} completed",cancelBatch:"Cancel Remaining",batchCancelled:"Remaining batch items cancelled",cancelBatchConfirmTitle:"Cancel Batch",cancelBatchConfirmMessage:"Cancel all remaining pending items in this batch?",batch:"Batch",sections:{currentlyPrinting:"Currently Printing",queued:"Queued",history:"History"},status:{pending:"Pending",waiting:"Waiting",printing:"Printing",paused:"Paused",completed:"Completed",failed:"Failed",skipped:"Skipped",cancelled:"Cancelled"},summary:{printing:"Printing",queued:"Queued",totalTime:"Total Queue Time",totalWeight:"Total Queue Weight",history:"History"},filter:{allPrinters:"All Printers",unassigned:"Unassigned",allStatus:"All Status",allLocations:"All Locations",any:"Any"},sort:{byPosition:"Sort by Position",byName:"Sort by Name",byPrinter:"Sort by Printer",bySchedule:"Sort by Schedule",byDate:"Sort by Date",ascendingOldest:"Ascending (oldest first)",descendingNewest:"Descending (newest first)"},badges:{staged:"Staged",requiresPrevious:"Requires previous success",autoPowerOff:"Auto power off",gcodeInjection:"G-code"},empty:{title:"No prints scheduled",description:'Schedule a print from the Archives page using the "Schedule" option in the context menu, or drag and drop files to get started.'},time:{asap:"ASAP",overdue:"Overdue",now:"Now",lessThanMinute:"In less than a minute",inMinutes:"In {{count}} min",inHours:"In {{count}} hours"},actions:{stopPrint:"Stop Print",startPrint:"Start Print",requeue:"Re-queue"},bulkEdit:{title:"Edit {{count}} Item",title_plural:"Edit {{count}} Items",description:"Only changed settings will be applied to selected items.",printer:"Printer",noChange:"— No change —",queueOptions:"Queue Options",staged:"Staged (manual start)",autoPowerOff:"Auto power off after print",requirePrevious:"Require previous success",printOptions:"Print Options",bedLevelling:"Bed levelling",flowCalibration:"Flow calibration",vibrationCalibration:"Vibration calibration",layerInspection:"First layer inspection",timelapse:"Timelapse",useAms:"Use AMS",applyChanges:"Apply Changes",selectAll:"Select All",deselectAll:"Deselect All",selected:"{{count}} selected",editSelected:"Edit Selected",cancelSelected:"Cancel Selected"},confirm:{cancelTitle:"Cancel Scheduled Print",cancelMessage:'Are you sure you want to cancel "{{name}}"?',stopTitle:"Stop Print",stopMessage:'Are you sure you want to stop the current print "{{name}}"? This will cancel the print job on the printer.',removeTitle:"Remove from History",removeMessage:'Are you sure you want to remove "{{name}}" from the queue history?',clearHistoryTitle:"Clear History",clearHistoryMessage:"Are you sure you want to remove all {{count}} item(s) from the history?",cancelButton:"Cancel Print",stopButton:"Stop Print",thisPrint:"this print",thisItem:"this item"},toast:{cancelled:"Queue item cancelled",cancelFailed:"Failed to cancel item",removed:"Queue item removed",removeFailed:"Failed to remove item",stopped:"Print stopped",stopFailed:"Failed to stop print",released:"Print released to queue",startFailed:"Failed to start print",reorderFailed:"Failed to reorder queue",historyCleared:"Cleared {{count}} history item(s)",clearHistoryFailed:"Failed to clear history",updateFailed:"Failed to update items",bulkCancelled:"Cancelled {{count}} item(s)",bulkCancelFailed:"Failed to cancel items"},timeline:{listView:"List",timelineView:"Timeline",unassigned:"Unassigned",noData:"No scheduled prints for this day",allDoneBy:"All prints estimated done by {{time}}",staged:"Staged",filterAll:"Show All",filterPrinting:"Printing",filterQueued:"Queued",time:{anyMoment:"any moment",minutesLeft:"{{minutes}}m left",hoursLeft:"{{hours}}h left",hoursMinutesLeft:"{{hours}}h {{minutes}}m left"},day:{previous:"Previous day",next:"Next day",today:"Today"}},permissions:{noStopPrint:"You do not have permission to stop prints",noStartPrint:"You do not have permission to start prints",noEdit:"You do not have permission to edit this queue item",noCancel:"You do not have permission to cancel this queue item",noRequeue:"You do not have permission to re-queue items",noRemove:"You do not have permission to remove this queue item",noClearHistory:"You do not have permission to clear all history",noEditItems:"You do not have permission to edit queue items",noCancelItems:"You do not have permission to cancel queue items"}},backgroundDispatch:{unknownFile:"Unknown file",unknownPrinter:"Unknown printer",startingPrints:"Starting prints",progressSummary:"{{complete}}/{{total}} complete • Dispatched: {{dispatched}} • Processing: {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Dismiss dispatch toast",cancelDispatchJob:"Cancel dispatch job",cancel:"Cancel",cancelling:"Cancelling…",awaitingPrinter:"Awaiting printer…",status:{dispatched:"Dispatched",processing:"Processing",completed:"Completed",failed:"Failed",cancelled:"Cancelled"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Dispatch cancelled",cancelFailed:"Failed to cancel dispatch",completeWithFailures:"Background dispatch complete: {{completed}} succeeded, {{failed}} failed",completeSuccess:"Background dispatch complete: {{completed}} succeeded",printStartedRemaining:"{{completed}} print(s) started, {{remaining}} more sending..."}},stats:{title:"Dashboard",subtitle:"Drag widgets to rearrange. Click the eye icon to hide.",overview:"Overview",totalPrints:"Total Prints",successRate:"Success Rate",totalPrintTime:"Total Print Time",printTime:"Print Time",totalFilament:"Total Filament Used",filamentUsed:"Filament Used",filamentCost:"Filament Cost",totalCost:"Total Cost",energyUsed:"Energy Used",energyCost:"Energy Cost",energyWarmingUpTooltip:"Energy tracking is still collecting hourly snapshots. Date-range totals will become accurate once at least one snapshot exists before the selected range. Early values may undercount.",averagePrintTime:"Average Print Time",printsPerDay:"Prints per Day",byPrinter:"By Printer",printsByPrinter:"Prints by Printer",byMaterial:"By Material",byMonth:"By Month",last7Days:"Last 7 Days",last30Days:"Last 30 Days",last90Days:"Last 90 Days",allTime:"All Time",quickStats:"Quick Stats",printActivity:"Print Activity",filamentTypes:"Filament Types",filamentTrends:"Filament Trends",failureAnalysis:"Failure Analysis",timeAccuracy:"Time Accuracy",successful:"Successful:",failed:"Failed:",perfectEstimate:"100% = perfect estimate",noTimeAccuracyData:"No time accuracy data yet",noFilamentData:"No filament data available",noPrinterData:"No printer data available",noPrintData:"No print data available",noPrintDataLast30Days:"No print data in the last 30 days",failureReasons:"Failure Reasons",topFailureReasons:"Top Failure Reasons",failedPrintsCount:"{{failed}} / {{total}} prints failed",lastWeekRate:"Last week: {{rate}}%",resetLayout:"Reset Layout",recalculateCosts:"Recalculate Costs",recalculateCostsHint:"Recalculate all archive costs using current filament prices",exportStats:"Export Stats",exportAsCsv:"Export as CSV",exportAsExcel:"Export as Excel",hiddenCount:"{{count}} Hidden",exportDownloaded:"Export downloaded",exportFailed:"Export failed",layoutReset:"Layout reset",recalculatedCosts:"Recalculated costs for {{count}} archives",recalculateFailed:"Failed to recalculate costs",loadingStats:"Loading statistics...",noPermissionResetLayout:"You do not have permission to reset layout",noPermissionRecalculate:"You do not have permission to recalculate costs",noPrintDataInRange:"No print data in selected range",periodFilament:"Period Filament",periodCost:"Period Cost",avgPerPrint:"Avg per Print",usageOverTime:"Usage Over Time",filamentByWeight:"Weight",printDuration:"Print Duration",printerUtilization:"Printer Utilization",filamentSuccess:"Success by Material",printHabits:"Print Habits",printTimeOfDay:"Print Time of Day",colorDistribution:"Color Distribution",noColorData:"No color data available",records:"Records",longestPrint:"Longest Print",heaviestPrint:"Heaviest Print",mostExpensivePrint:"Most Expensive",busiestDay:"Busiest Day",successStreak:"Success Streak",streakPrint:"consecutive print",streakPrints:"{{count}} consecutive prints",printerStats:"Printer Stats",hours:"hours",avgPrints:"Avg. prints",noArchiveData:"No print data available",filamentByTime:"Time",avgWeight:"Avg. weight",avgTime:"Avg. time",filamentByPrints:"Prints",timeframe:{today:"Today","this-week":"This Week","this-month":"This Month","last-7":"Last 7 Days","last-30":"Last 30 Days","last-90":"Last 90 Days","this-year":"This Year","all-time":"All Time",custom:"Custom Range",from:"From",to:"To"},allUsers:"All Users",noUser:"No User (System)",filterByUser:"Filter by User"},maintenance:{title:"Maintenance",overview:"Overview",allOk:"All maintenance up to date",dueCount:"{{count}} item due",dueCount_plural:"{{count}} items due",warningCount:"{{count}} warning",warningCount_plural:"{{count}} warnings",totalPrintTime:"Total Print Time",nextMaintenance:"Next Maintenance",nothingDue:"Nothing due",tasks:"Tasks",lastPerformed:"Last performed",interval:"Interval",hoursRemaining:"{{hours}}h remaining",hoursOverdue:"{{hours}}h overdue",markDone:"Mark as Done",performMaintenance:"Perform Maintenance",history:"History",noHistory:"No maintenance history",editPrintHours:"Edit Print Hours",currentHours:"Current Hours",statusTab:"Status",settingsTab:"Settings",overdueCount:"{{count}} overdue",dueSoonCount:"{{count}} due soon",dueSoon:"Due soon",allGood:"All good",overdueBy:"Overdue by {{duration}}",dueIn:"Due in {{duration}}",timeLeft:"{{duration}} left",day:"1 day",days:"{{count}} days",week:"1 week",weeks:"{{count}} weeks",month:"1 month",months:"{{count}} months",year:"1 year",maintenanceTypes:"Maintenance Types",maintenanceTypesDescription:"System types and your custom maintenance tasks",addCustomType:"Add Custom Type",restoreDefaults:"Restore Default Tasks",intervalType:"Interval Type",intervalValue:"Interval ({{type}})",icon:"Icon",documentationLink:"Documentation Link (optional)",assignToPrinters:"Assign to Printers",selectAtLeastOnePrinter:"Select at least one printer",addType:"Add Type",custom:"Custom",printHours:"Print Hours",calendarDays:"Calendar Days",exampleName:"e.g., Replace HEPA Filter",viewDocumentation:"View documentation",timeBasedInterval:"Time-based interval",intervalOverrides:"Interval Overrides",intervalOverridesDescription:"Customize intervals for specific printers",assignedToPrinters:"Assigned to printers:",noPrintersAssigned:"No printers assigned",addPrinterShort:"Add:",printersAssignedClick:"{{count}} printer(s) assigned - click to manage",removeFromPrinter:"Remove from this printer",types:{lubricateCarbonRods:"Lubricate Carbon Rods",lubricateRails:"Lubricate Linear Rails",cleanNozzle:"Clean Nozzle/Hotend",checkBelts:"Check Belt Tension",cleanBuildPlate:"Clean Build Plate",checkExtruder:"Check Extruder Gears",checkCooling:"Check Cooling Fans",generalInspection:"General Inspection",cleanCarbonRods:"Clean Carbon Rods",lubricateSteelRods:"Lubricate Steel Rods",cleanSteelRods:"Clean Steel Rods",cleanLinearRails:"Clean Linear Rails",checkPtfeTube:"Check PTFE Tube",replaceHepaFilter:"Replace HEPA Filter",replaceCarbonFilter:"Replace Carbon Filter",lubricateLeftNozzleRail:"Lubricate Left Nozzle Rail"},maintenanceComplete:"Maintenance marked as complete",typeUpdated:"Maintenance type updated",typeDeleted:"Maintenance type deleted",defaultsRestored:"Restored {{count}} default task(s)",printHoursUpdated:"Print hours updated",printerAssigned:"Printer assigned",printerRemoved:"Printer removed",deleteTypeConfirm:'Delete "{{name}}"?',deleteSystemTypeTitle:"Delete default maintenance task?",deleteSystemTypeMessage:'Are you sure you want to delete the default maintenance task "{{name}}"?',noPermissionUpdate:"You do not have permission to update maintenance items",noPermissionPerform:"You do not have permission to perform maintenance",noPermissionEditTypes:"You do not have permission to edit maintenance types",noPermissionDeleteTypes:"You do not have permission to delete maintenance types",noPermissionEditHours:"You do not have permission to edit print hours",noPermissionRemovePrinter:"You do not have permission to remove printer assignments",noPermissionAssignPrinter:"You do not have permission to assign printers",noPermissionEditIntervals:"You do not have permission to edit intervals",configureSettings:"Configure maintenance types and intervals"},settings:{title:"Settings",general:"General",tabs:{general:"General",smartPlugs:"Smart Plugs",notifications:"Notifications",queue:"Workflow",filament:"Filament",network:"Network",apiKeys:"API Keys",virtualPrinter:"Virtual Printer",spoolbuddy:"SpoolBuddy",failureDetection:"Failure Detection",users:"Authentication",backup:"Backup",emailAuth:"Email Authentication",ldap:"LDAP",twoFa:"Two-Factor Auth",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy devices",infoBody:"SpoolBuddy kiosks register themselves automatically via heartbeat. Unregister a device here if it is no longer in use or if a stale duplicate was left behind by a daemon crash.",duplicatesTitle:"{{count}} devices registered",duplicatesBody:"Only the first registered device is used by the kiosk UI. If one of these is a stale duplicate from a crash, unregister it — an online device will re-register itself on its next heartbeat.",empty:"No SpoolBuddy devices registered yet.",online:"Online",offline:"Offline",unregister:"Unregister",unregisterSuccess:"Device unregistered",unregisterError:"Failed to unregister device",confirmTitle:"Unregister SpoolBuddy device?",confirmBody:'This will remove "{{hostname}}" ({{deviceId}}) from the database. If the device is online, it will re-register itself on its next heartbeat.',ipAddress:"IP address",firmware:"Firmware",lastSeen:"Last seen",daemonUptime:"Daemon uptime",systemUptime:"System uptime",never:"never",nfc:"NFC",scale:"Scale",cpuTemp:"CPU temp",memory:"Memory",disk:"Disk",update:"Update",updateConfirmTitle:"Update Spoolbuddy daemon?",updateConfirmBody:'Trigger a software update on "{{hostname}}"? The daemon will restart once the update is applied.',restartBrowser:"Restart Browser",restartBrowserConfirmTitle:"Restart kiosk browser?",restartBrowserConfirmBody:'Restart the kiosk browser on "{{hostname}}"? The display will blank briefly.',restartDaemon:"Restart Daemon",restartDaemonConfirmTitle:"Restart Spoolbuddy daemon?",restartDaemonConfirmBody:'Restart the Spoolbuddy daemon on "{{hostname}}"? The device will go offline for a few seconds.',reboot:"Reboot",rebootConfirmTitle:"Reboot device?",rebootConfirmBody:'Reboot "{{hostname}}"? The device will be offline for around a minute.',shutdown:"Shutdown",shutdownConfirmTitle:"Shutdown device?",shutdownConfirmBody:'Shutdown "{{hostname}}"? You will need physical access to power it back on.',commandConfirm:"Confirm",commandQueued:"Command queued",commandError:"Failed to send command"},ldap:{title:"LDAP Authentication",enabledDesc:"LDAP authentication is enabled",disabledDesc:"LDAP authentication is disabled",disabledHint:"Configure and save LDAP settings below, then enable.",enabled:"LDAP authentication enabled",disabled:"LDAP authentication disabled",feature1:"Users can login with LDAP credentials",feature2:"Local admin account remains as fallback",feature3:"LDAP groups are mapped to BamBuddy groups on login",serverConfig:"LDAP Server Configuration",serverUrl:"Server URL",serverUrlHint:"Use ldaps:// for SSL or ldap:// with StartTLS",security:"Security",securityHint:"StartTLS upgrades a plain connection to TLS. LDAPS uses TLS from the start.",bindDn:"Bind DN (Service Account)",bindPassword:"Bind Password",searchBase:"Search Base DN",userFilter:"User Search Filter",userFilterHint:"{username} is replaced with the login username. Use (uid={username}) for OpenLDAP.",autoProvision:"Auto-provision users",autoProvisionHint:"Automatically create a BamBuddy account on first LDAP login",defaultGroup:"Default group",defaultGroupNone:"— None (no fallback) —",defaultGroupHint:"Fallback group assigned when an LDAP user authenticates but is not listed in any mapped LDAP group. Leave empty to leave unmapped users without permissions.",groupMapping:"Group Mapping (JSON)",groupMappingHint:"Map LDAP group DNs to BamBuddy groups. Available groups: ",testConnection:"Test Connection",settingsSaved:"LDAP settings saved",errors:{serverRequired:"LDAP server URL is required",searchBaseRequired:"Search base DN is required",enableAuthFirst:"Enable authentication first",configureLdapFirst:"Save LDAP settings first"}},email:{smtpSettings:"SMTP Configuration",smtpHost:"SMTP Server",smtpPort:"SMTP Port",security:"Security",authentication:"Authentication",username:"Username",password:"Password",fromEmail:"From Email",fromName:"From Name",testConnection:"Test SMTP Connection",testRecipient:"Test Recipient Email",sendTest:"Send Test Email",sending:"Sending...",save:"Save Settings",saving:"Saving...",advancedAuth:"Advanced Authentication",advancedAuthEnabled:"Advanced Authentication is enabled",advancedAuthEnabledDesc:"Email-based user management features are active. New users will receive auto-generated passwords via email, and users can reset their passwords through the forgot password feature.",advancedAuthDisabled:"Advanced Authentication is disabled",advancedAuthDisabledDesc:"Enable advanced authentication to activate email-based features for user management.",enable:"Enable",disable:"Disable",feature1:"Passwords are auto-generated and emailed to new users",feature2:"Users can login with username or email",feature3:"Forgot password feature is available",feature4:"Admins can reset user passwords via email",errors:{requiredFields:"Please fill in all required fields",usernameRequired:"Username is required when authentication is enabled",enterTestEmail:"Please enter a test email address",smtpServerAndEmail:"Please fill in SMTP Server and From Email before testing",usernamePasswordRequired:"Username and Password are required when authentication is enabled",configureSmtpFirst:"Please configure and test SMTP settings first",enableAuthFirst:"Please enable authentication first to use email-based features."},success:{settingsSaved:"SMTP settings saved successfully"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"None (Port 25)"},authOptions:{enabled:"Enabled",disabled:"Disabled"}},appearance:"Appearance",notifications:"Notifications",smartPlugs:"Smart Plugs",spoolman:"Spoolman",updates:"Updates",language:"Language",languageDescription:"Select your preferred language",theme:"Theme",themeLight:"Light",themeDark:"Dark",themeSystem:"System",defaultView:"Default View",defaultViewDescription:"Page to show when opening the app",checkForUpdates:"Check for Updates",autoUpdate:"Auto Update",currentVersion:"Current Version",latestVersion:"Latest Version",upToDate:"You are up to date",updateAvailable:"Update available",notificationLanguage:"Notification Language",notificationLanguageDescription:"Language for push notifications",bedCooledThreshold:"Bed Cooled Threshold",bedCooledThresholdDescription:"Temperature below which the bed is considered cooled after a print",userNotificationsEnabled:"User Notifications",userNotificationsEnabledDescription:"Enable the user notifications menu and email notifications for print job events. Requires Advanced Authentication.",userNotificationsDisabledHint:"Enable Advanced Authentication to use user notifications.",notificationProviders:"Notification Providers",addProvider:"Add Provider",editProvider:"Edit Provider",providerType:"Provider Type",testNotification:"Test Notification",testSuccess:"Test notification sent successfully",testFailed:"Failed to send test notification",quietHours:"Quiet Hours",quietHoursDescription:"Do not disturb during these hours",quietHoursStart:"Start",quietHoursEnd:"End",events:{title:"Notification Events",printStart:"Print Started",printComplete:"Print Completed",printFailed:"Print Failed",printStopped:"Print Stopped",printProgress:"Progress Milestones",printProgressDescription:"Notify at 25%, 50%, 75%",printerOffline:"Printer Offline",printerError:"Printer Error",filamentLow:"Low Filament",maintenanceDue:"Maintenance Due",maintenanceDueDescription:"Notify when maintenance is needed"},smartPlug:{title:"Smart Plugs",add:"Add Smart Plug",edit:"Edit Smart Plug",name:"Name",ipAddress:"IP Address",linkedPrinter:"Linked Printer",autoOn:"Auto Power On",autoOnDescription:"Turn on when print starts",autoOff:"Auto Power Off",autoOffDescription:"Turn off after print completes",offDelay:"Off Delay",offDelayMinutes:"Minutes after print",offDelayTemp:"When nozzle below temperature",currentState:"Current State",turnOn:"Turn On",turnOff:"Turn Off"},filamentTracking:"Filament Tracking",filamentTrackingDesc:"Choose how to track your filament spools. You can use the built-in inventory or connect an external Spoolman server.",filamentChecks:"Filament checks",disableFilamentWarnings:"Disable filament warnings",disableFilamentWarningsDesc:"Don't show warnings about insufficient filament when printing or queueing",preferLowestFilament:"Prefer lowest remaining filament",preferLowestFilamentDesc:"When multiple spools match, use the one with the least filament remaining",trackingModeBuiltIn:"Built-in Inventory",trackingModeBuiltInDesc:"RFID auto-matching and usage tracking included",trackingModeSpoolmanDesc:"External filament management server",builtInFeatureRfid:"Automatically detects Bambu Lab RFID spools in AMS",builtInFeatureUsage:"Tracks filament consumption per print",builtInFeatureCatalog:"Manage spools, colors, and K-factor profiles",builtInFeatureThirdParty:"Third-party spools can be assigned to inventory spools",amsSyncButton:"Sync Weights from AMS",amsSyncTitle:"Sync Spool Weights from AMS",amsSyncMessage:"This will overwrite all inventory spool weights with the current AMS remain% values from connected printers. Use this to recover from corrupted weight data. Printers must be online.",amsSyncing:"Syncing...",amsSyncSuccess:"{{synced}} spool(s) synced, {{skipped}} skipped",amsSyncError:"Failed to sync weights from AMS",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL of your Spoolman server (e.g., http://localhost:7912)",spoolmanConnected:"Connected",spoolmanDisconnected:"Disconnected",status:"Status",connect:"Connect",disconnect:"Disconnect",howSyncWorks:"How Sync Works",syncInfoRfidOnly:"Only official Bambu Lab spools with RFID are synced",syncInfoAutoCreate:"New spools are auto-created in Spoolman on first sync",syncInfoThirdPartySkipped:"Non-Bambu Lab spools (third-party, refilled) are skipped",linkingExistingSpools:"Linking Existing Spools",linkingExistingSpoolsDesc:'To link existing Spoolman spools to your AMS, hover over an AMS slot and click "Link to Spoolman".',syncMode:"Sync Mode",syncModeAuto:"Automatic",syncModeManual:"Manual Only",syncModeAutoDesc:"AMS data syncs automatically when changes are detected",syncModeManualDesc:"Only sync when manually triggered",syncAmsData:"Sync AMS Data",syncAmsDataDesc:"Manually sync printer AMS data to Spoolman",allPrinters:"All Printers",noDefaultPrinter:"No default (ask each time)",sidebarOrder:"Sidebar order",saveThumbnails:"Save thumbnails",captureFinishPhoto:"Capture finish photo",noPrintersConfigured:"No printers configured",archiveMode:{always:"Always create archive entry",never:"Never create archive entry",ask:"Ask each time"},checkForUpdatesLabel:"Check for updates",checkPrinterFirmware:"Check printer firmware",includeBetaUpdates:"Include beta versions",includeBetaUpdatesDesc:"Notify about beta and prerelease versions when checking for updates",enableRetry:"Enable retry",homeAssistantDescription:"Control smart plugs via Home Assistant",environmentManagedLabel:"(Environment Managed)",autoEnabledViaEnv:"Automatically enabled via environment variables",urlFromEnvReadOnly:"Value set by HA_URL environment variable (read-only)",tokenFromEnvReadOnly:"Value set by HA_TOKEN environment variable (read-only)",mqttConnectedTo:"Connected to",prometheusDescription:"Expose printer data in Prometheus format",noSmartPlugsTitle:"No smart plugs configured",noSmartPlugsDescription:"Add a Tasmota-based smart plug to track energy usage and automate power control.",noProvidersTitle:"No providers configured",noProvidersDescription:"Add a provider to receive alerts.",noTemplatesAvailable:"No templates available. Restart the backend to seed default templates.",apiPermissionView:"View printer status and queue",apiPermissionEdit:"Add and remove items from print queue",apiKeysEmptyTitle:"No API keys",apiKeysEmptyDescription:"Create an API key to integrate with external services.",noUsersFound:"No users found",noGroupsFound:"No groups found",noGroupsAvailable:"No groups available",passwordsDoNotMatch:"Passwords do not match",systemGroupWarning:"System group names cannot be changed",authDisabledTitle:"Authentication is Disabled",authDisabledFeature1:"Require login to access the system",authDisabledFeature2:"Create multiple users with group-based permissions",authDisabledFeature3:"Control access with 50+ granular permissions",userHasCreated:"This user has created:",userItemsQuestion:"What would you like to do with these items?",deleteUserConfirm:"Are you sure you want to delete this user?",actionCannotBeUndone:"This action cannot be undone.",addFirstSmartPlug:"Add Your First Smart Plug",providers:"Providers",log:"Log",testAll:"Test All",testResults:"Test Results",testPassedCount:"{{count}} passed",testFailedCount:"{{count}} failed",messageTemplates:"Message Templates",messageTemplatesDescription:"Customize notification messages for each event.",apiKeys:"API Keys",apiKeysDescription:"Create API keys for external integrations and webhooks.",createKey:"Create Key",apiKeyCreated:"API Key Created Successfully",apiKeyCopyWarning:"Copy this key now - it won't be shown again!",useInApiBrowser:"Use in API Browser",createNewApiKey:"Create New API Key",keyName:"Key Name",keyNamePlaceholder:"e.g., Home Assistant, OctoPrint",readStatus:"Read Status",readStatusDescription:"View printer status and queue",manageQueue:"Manage Queue",manageQueueDescription:"Add and remove items from print queue",controlPrinter:"Control Printer",controlPrinterDescription:"Pause, resume, and stop prints",unnamedKey:"Unnamed Key",lastUsed:"Last used",read:"Read",control:"Control",createFirstKey:"Create Your First Key",webhookEndpoints:"Webhook Endpoints",webhookApiKeyHint:"Use your API key in the X-API-Key header.",webhook:{getAllStatus:"Get all printer status",getSpecificStatus:"Get specific printer status",addToQueue:"Add to print queue",pausePrint:"Pause print",resumePrint:"Resume print",stopPrint:"Stop print"},apiBrowser:"API Browser",apiBrowserDescription:"Explore and test all available API endpoints.",apiKeyForTesting:"API Key for Testing",apiKeyPlaceholder:"Paste your API key here to test authenticated endpoints...",apiKeyHint:"This key will be sent as X-API-Key header with requests.",deleteApiKeyTitle:"Delete API Key",deleteApiKeyMessage:"Are you sure you want to delete this API key? Any integrations using this key will stop working.",deleteKey:"Delete Key",amsDisplayThresholds:"AMS Display Thresholds",amsThresholdsDescription:"Configure color thresholds for AMS humidity and temperature indicators.",humidity:"Humidity",goodGreen:"Good (green)",fairOrange:"Fair (orange)",aboveFairBad:"Above fair threshold shows as red (bad)",fairAlsoDryingThreshold:"This threshold is also used to trigger auto-drying when enabled",temperature:"Temperature",goodBlue:"Good (blue)",aboveFairHot:"Above fair threshold shows as red (hot)",historyRetention:"History Retention",keepSensorHistory:"Keep sensor history for",historyRetentionDescription:"Older humidity and temperature data will be automatically deleted",defaultPrintOptions:"Default Print Options",defaultPrintOptionsDescription:"Set default values for print options when starting new prints. These can be overridden per print in the print dialog.",defaultBedLevelling:"Bed Levelling",defaultBedLevellingDesc:"Auto-level bed before print",defaultFlowCali:"Flow Calibration",defaultFlowCaliDesc:"Calibrate extrusion flow",defaultVibrationCali:"Vibration Calibration",defaultVibrationCaliDesc:"Reduce ringing artifacts",defaultLayerInspect:"First Layer Inspection",defaultLayerInspectDesc:"AI inspection of first layer",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Record timelapse video",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Plate-Clear Confirmation",requirePlateClear:"Require plate-clear confirmation",requirePlateClearDescription:'When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disabling this also hides the plate status badge and the "Mark plate as cleared" button on printer cards.',gcodeInjection:"G-code Injection",gcodeInjectionDescription:'Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.',gcodeInjectionNoPrinters:"No printers found. Add printers to configure G-code snippets.",gcodeStartLabel:"Start G-code",gcodeEndLabel:"End G-code",gcodeStartPlaceholder:"G-code prepended before the print starts...",gcodeEndPlaceholder:"G-code appended after the print ends...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Queue Auto-Drying",queueDryingDescription:"Automatically dry AMS filament when printer is idle between queued prints. Uses humidity threshold above to trigger drying.",queueDryingEnabled:"Enable auto-drying",queueDryingEnabledDescription:"Start AMS drying automatically when printer is idle and humidity is above threshold",queueDryingBlock:"Wait for drying to complete",queueDryingBlockDescription:"Block the print queue until drying finishes. When off, prints take priority over drying.",ambientDryingEnabled:"Ambient drying",ambientDryingEnabledDescription:"Automatically dry filament on idle printers when humidity exceeds threshold, even without queued prints.",dryingPresets:"Drying Presets",dryingPresetsDescription:"Temperature and duration per filament type. AMS 2 Pro uses lower temps, AMS-HT supports higher temps.",dryingFilament:"Filament",printModal:"Print Modal",expandCustomMapping:"Expand custom mapping by default",expandCustomMappingDescription:"When printing to multiple printers, show per-printer AMS mapping expanded",authentication:"Authentication",authEnabledDescription:"Your instance is secured with user authentication",authDisabledDescription:"Enable to require login and manage user access",authDisabledMessage:"Enable authentication to create user accounts, manage permissions, and secure your Bambuddy instance.",enableAuthentication:"Enable Authentication",currentUser:"Current User",changePassword:"Change Password",admin:"Admin",users:"Users",addUser:"Add User",groups:"Groups",addGroup:"Add Group",system:"System",noDescription:"No description",userCount:"{{count}} users",permissionCount:"{{count}} permissions",createUser:"Create User",username:"Username",enterUsername:"Enter username",password:"Password",enterPassword:"Enter password (min 6 characters)",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm password",viewReleaseOnGitHub:"View release on GitHub",turnAllPlugsOn:"Turn all plugs on",turnAllPlugsOff:"Turn all plugs off",clearNotificationLogs:"Clear Notification Logs",clearLogsMessage:"This will permanently delete all notification logs older than 30 days. This action cannot be undone.",clearLogs:"Clear Logs",resetUiPreferences:"Reset UI Preferences",resetUiPreferencesMessage:"This will reset all UI preferences to defaults: sidebar order, theme, dashboard layout, view modes, and sorting preferences. Your printers, archives, and server settings will NOT be affected. The page will reload after clearing.",resetPreferences:"Reset Preferences",deleteGroupTitle:"Delete Group",deleteGroupMessage:"Are you sure you want to delete this group? Users in this group will lose these permissions.",deleteGroup:"Delete Group",disableAuthenticationTitle:"Disable Authentication",disableAuthenticationMessage:"Are you sure you want to disable authentication? This will make your Bambuddy instance accessible without login. All users will remain in the database but authentication will be disabled.",disableAuthentication:"Disable Authentication",configureBambuddy:"Configure Bambuddy",systemDefault:"System Default",archiveSettings:"Archive Settings",newWindow:"New Window",embeddedOverlay:"Embedded Overlay",preferredSlicer:"Preferred Slicer",preferredSlicerDescription:"Choose which slicer application to open files with",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"External Cameras",costTracking:"Cost Tracking",printsOnly:"Prints Only",totalConsumption:"Total Consumption",dataManagement:"Data Management",storageUsage:"Storage Usage",storageUsageDescription:"Breakdown of data usage by category",storageUsageTotal:"Total",storageUsageErrors:"Errors",storageUsageOtherBreakdown:"Other (includes static assets, scripts, and configuration files)",storageUsageSystem:"System",storageUsageData:"Data",storageUsageUnavailable:"Storage usage information unavailable",clearNotificationLogsDescription:"Delete notification logs older than 30 days",resetUiPreferencesDescription:"Reset sidebar order, theme, view modes, and layout preferences. Printers, archives, and settings are not affected.",enableHomeAssistant:"Enable Home Assistant",enableMqtt:"Enable MQTT",useTls:"Use TLS",enableMetricsEndpoint:"Enable Metrics Endpoint",availableMetrics:"Available Metrics",editUser:"Edit User",deleteUserTitle:"Delete User",groupName:"Group Name",leaveEmptyForAnonymous:"Leave empty for anonymous",leaveEmptyForNoAuth:"Leave empty for no authentication",enterNewPassword:"Enter new password",confirmNewPassword:"Confirm new password",enterGroupName:"Enter group name",enterDescriptionOptional:"Enter description (optional)",enterCurrentPassword:"Enter current password",enterNewPasswordMin6:"Enter new password (min 6 characters)",toast:{keyCopied:"Key copied to clipboard",copyFailed:"Failed to copy key",keyAddedToBrowser:"Key added to API Browser",clearLogsFailed:"Failed to clear logs",uiPreferencesReset:"UI preferences reset. Refreshing...",authDisabled:"Authentication disabled successfully",authDisableFailed:"Failed to disable authentication",apiKeyCreated:"API key created",apiKeyDeleted:"API key deleted",userCreated:"User created successfully",userUpdated:"User updated successfully",userDeleted:"User deleted successfully",groupCreated:"Group created successfully",groupUpdated:"Group updated successfully",groupDeleted:"Group deleted successfully",fillRequiredFields:"Please fill in all required fields",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters",enterGroupName:"Please enter a group name",settingsSaved:"Settings saved",noPermissionUpdate:"You do not have permission to change settings",cameraSettingsSaved:"Camera settings saved",enterCameraUrl:"Please enter a camera URL",passwordChanged:"Password changed successfully",connectionFailed:"Connection failed",testFailed:"Test failed",cameraConnected:"Camera connected{{resolution}}"},testConnection:"Test Connection",catalog:{spoolCatalog:"Spool Catalog",spoolCatalogDescription:"Empty spool weights by brand/type. Used for automatic weight lookup when adding spools.",searchCatalog:"Search catalog...",addNewEntry:"Add New Entry",namePlaceholder:"Name (e.g., Bambu Lab - Plastic)",weight:"Weight",type:"Type",default:"Default",custom:"Custom",noMatch:"No entries match your search",empty:"No entries in catalog",deleteEntry:"Delete Entry",deleteConfirm:'Are you sure you want to delete "{{name}}"?',resetCatalog:"Reset Catalog",resetConfirm:"Reset catalog to defaults? This will remove all custom entries.",loadFailed:"Failed to load spool catalog",nameWeightRequired:"Name and weight are required",entryAdded:"Entry added",addFailed:"Failed to add entry",entryUpdated:"Entry updated",updateFailed:"Failed to update entry",entryDeleted:"Entry deleted",deleteFailed:"Failed to delete entry",resetSuccess:"Catalog reset to defaults",resetFailed:"Failed to reset catalog",exported:"Exported {{count}} entries",imported:"Imported {{added}} entries ({{skipped}} skipped)",importFailed:"Failed to import: invalid JSON format",exportTooltip:"Export catalog to JSON",importTooltip:"Import catalog from JSON",resetTooltip:"Reset to defaults",selectedCount:"{{count}} selected",deleteSelected:"Delete Selected",bulkDeleteConfirm:"Are you sure you want to delete {{count}} entries?",bulkDeleted:"Deleted {{count}} entries",bulkDeleteFailed:"Failed to delete entries"},colorCatalog:{title:"Color Catalog",description:"Filament colors by manufacturer/material. Used for automatic color lookup when adding spools.",searchColors:"Search colors...",allManufacturers:"All manufacturers",addNewColor:"Add New Color",manufacturer:"Manufacturer",colorName:"Color Name",hex:"Hex",materialOptional:"Material (optional)",showing:"Showing {{filtered}} of {{total}} colors",noMatch:"No colors match your search",empty:"No colors in catalog",deleteColor:"Delete Color",deleteConfirm:'Are you sure you want to delete "{{name}}"?',resetCatalog:"Reset Color Catalog",resetConfirm:"Reset catalog to defaults? This will remove all custom colors.",sync:"Sync",starting:"Starting...",syncTooltip:"Sync from FilamentColors.xyz (2000+ colors, may take a minute)",loadFailed:"Failed to load color catalog",fieldsRequired:"Manufacturer, color name, and hex color are required",colorAdded:"Color added",addFailed:"Failed to add color",colorUpdated:"Color updated",updateFailed:"Failed to update color",colorDeleted:"Color deleted",deleteFailed:"Failed to delete color",resetSuccess:"Color catalog reset to defaults",resetFailed:"Failed to reset catalog",syncUpToDate:"Already up to date ({{count}} colors checked)",syncComplete:"Added {{added}} new colors ({{skipped}} already existed)",syncError:"Sync error",syncFailed:"Failed to sync from FilamentColors.xyz",exported:"Exported {{count}} colors",imported:"Imported {{added}} colors ({{skipped}} skipped)",importFailed:"Failed to import: invalid JSON format",selectedCount:"{{count}} selected",deleteSelected:"Delete Selected",bulkDeleteConfirm:"Are you sure you want to delete {{count}} colors?",bulkDeleted:"Deleted {{count}} colors",bulkDeleteFailed:"Failed to delete colors"},dateFormat:"Date Format",dateFormatUs:"US (MM/DD/YYYY)",dateFormatEu:"EU (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"Time Format",timeFormat12:"12-hour (3:30 PM)",timeFormat24:"24-hour (15:30)",defaultPrinter:"Default Printer",defaultPrinterDescription:"Pre-select this printer for uploads, reprints, and other operations.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Drag items in the sidebar to reorder. Reset to default order here.",setDefault:"Set Default",sidebarOrderSetDefaultHint:"Set default applies the current menu order to users who haven't customized theirs.",sidebarDefaultSet:"Default menu order has been set.",sidebarDefaultCleared:"Default menu order cleared.",sidebarDefaultFailed:"Failed to set default menu order.",reset:"Reset",darkMode:"Dark Mode",lightMode:"Light Mode",active:"(active)",background:"Background",accent:"Accent",style:"Style",bgNeutral:"Neutral",bgWarm:"Warm",bgCool:"Cool",bgOled:"OLED Black",bgSlate:"Slate Blue",bgForest:"Forest Green",accentGreen:"Green",accentTeal:"Teal",accentBlue:"Blue",accentOrange:"Orange",accentPurple:"Purple",accentRed:"Red",styleClassic:"Classic",styleGlow:"Glow",styleVibrant:"Vibrant",themeToggleHint:"Toggle between dark and light mode using the sun/moon icon in the sidebar.",autoArchivePrints:"Auto-archive prints",autoArchiveDescription:"Automatically save 3MF files when prints complete",saveThumbnailsDescription:"Extract and save preview images from 3MF files",captureFinishPhotoDescription:"Take a photo from printer camera when print completes",ffmpegNotInstalled:"ffmpeg not installed",ffmpegRequired:"Camera capture requires ffmpeg. Install it via <brew>brew install ffmpeg</brew> (macOS) or <apt>apt install ffmpeg</apt> (Linux).",camera:"Camera",cameraViewMode:"Camera View Mode",cameraOverlayDescription:"Camera opens in a resizable overlay on the main screen",cameraWindowDescription:"Camera opens in a separate browser window",externalCamerasDescription:"Configure external cameras to replace the built-in printer camera. Supports MJPEG streams, RTSP, HTTP snapshots, and USB cameras (V4L2). When enabled, the external camera is used for live view and finish photos.",cameraPlaceholderUsb:"Device path (/dev/video0)",cameraPlaceholderUrl:"Camera URL (rtsp://... or http://...)",cameraTypeMjpeg:"MJPEG Stream",cameraTypeRtsp:"RTSP Stream",cameraTypeSnapshot:"HTTP Snapshot",cameraTypeUsb:"USB Camera (V4L2)",cameraRotation:"Rotation",test:"Test",connected:"Connected",disconnected:"Disconnected",currency:"Currency",defaultFilamentCost:"Default filament cost (per kg)",electricityCost:"Electricity cost per kWh",energyDisplayMode:"Energy display mode",energyModePrintDescription:"Dashboard shows sum of energy used during prints",energyModeTotalDescription:"Dashboard shows lifetime energy from smart plugs",fileManager:"File Manager",createArchiveEntry:"Create Archive Entry When Printing",createArchiveEntryDescription:"When printing from File Manager, optionally create an archive entry",lowDiskSpaceWarning:"Low Disk Space Warning",lowDiskSpaceDescription:"Show warning when free disk space falls below this threshold",printerFirmware:"Printer Firmware",checkFirmwareDescription:"Check for printer firmware updates from Bambu Lab",bambuddySoftware:"Bambuddy Software",autoCheckDescription:"Automatically check for new versions on startup",checkNow:"Check now",updateAvailableVersion:"Update available: v{{version}}",releaseNotes:"Release Notes",updateViaDocker:"Update via Docker Compose:",installUpdate:"Install Update",latestVersionRunning:"You're running the latest version",failedToCheckUpdates:"Failed to check for updates: {{error}}",backupRestore:"Backup & Restore",backupRestoreDescription:"Export/import settings and configure GitHub backup",goToBackup:"Go to Backup",externalUrl:"External URL",externalUrlDescription:"The external URL where Bambuddy is accessible. Used for notification images and external integrations.",bambuddyUrl:"Bambuddy URL",externalUrlHint:"Include protocol and port (e.g., http://192.168.1.100:8000)",ftpRetry:"FTP Retry",ftpRetryDescription:"Retry FTP operations when printer WiFi is unreliable. Applies to 3MF downloads, print uploads, timelapse downloads, and firmware updates.",autoRetryDescription:"Automatically retry failed FTP operations",retryAttempts:"Retry attempts",retryDelay:"Retry delay",connectionTimeout:"Connection timeout",time_one:"{{count}} time",time_other:"{{count}} times",second_one:"{{count}} second",second_other:"{{count}} seconds",nSeconds:"{{count}} seconds",increaseForWeakWifi:"Increase for printers with weak WiFi",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Connect to Home Assistant to control smart plugs via HA's REST API. Supports switch, light, input_boolean, and script entities.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Long-Lived Access Token",haTokenHint:"Create a token in HA: Profile → Long-Lived Access Tokens → Create Token",connectionSuccessful:"Connection Successful",connectionFailed:"Connection Failed",haConnectionSuccess:"Successfully connected to Home Assistant.",haConnectionFailed:"Failed to connect to Home Assistant.",mqttPublishing:"MQTT Publishing",mqttDescription:"Publish BamBuddy events to an external MQTT broker for integration with Node-RED, Home Assistant, and other automation systems.",mqttEnableDescription:"Publish events to external MQTT broker",brokerHostname:"Broker hostname",port:"Port",usernameOptional:"Username (optional)",passwordOptional:"Password (optional)",topicPrefix:"Topic prefix",topicPrefixHint:"Topics will be: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Prometheus Metrics",prometheusEndpointDescription:"Expose printer metrics at <code>/api/v1/metrics</code> for Prometheus/Grafana monitoring.",bearerTokenOptional:"Bearer Token (optional)",bearerTokenHint:"If set, requests must include <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Connection status",metricsPrinterState:"Printer state (idle/printing/etc)",metricsPrintProgress:"Print progress 0-100%",metricsBedTemp:"Bed temperature",metricsNozzleTemp:"Nozzle temperature",metricsPrintsTotal:"Total prints by result",metricsMore:"...and more (layers, fans, queue, filament usage)",smartPlugsDescription:"Connect smart plugs (Tasmota or Home Assistant) to automate power control and track energy usage for your printers.",allOn:"All On",allOff:"All Off",addSmartPlug:"Add Smart Plug",energySummary:"Energy Summary",currentPower:"Current Power",plugsOnline:"{{reachable}}/{{total}} plugs online",today:"Today",yesterday:"Yesterday",total:"Total",enablePlugsForSummary:"Enable plugs to see energy summary",addNotificationProvider:"Add",systemBadge:"(System)",creating:"Creating...",changing:"Changing...",deleteUserAndItems:"Delete user AND their items",deleteUserKeepItems:"Delete user, keep items (become ownerless)",ok:"OK",twoFa:{totpTitle:"Authenticator App (TOTP)",totpDesc:"Use an authenticator app like Google Authenticator, Aegis or Authy.",emailOtpTitle:"Email OTP",emailOtpDesc:"Send a one-time code to {{email}} when you log in.",emailOtpNoEmail:"Add an email address to your account to enable this method.",addEmailFirst:"Your account has no email address. Ask an admin to add one before enabling Email OTP.",setupTotp:"Set up Authenticator App",setupAuthApp:"Set up Authenticator App",setupInstructions:"Scan the QR code below with your authenticator app, then confirm with a code.",manualEntry:"Can't scan? Enter this secret manually:",scannedContinue:"I've scanned the code — continue",enterCodeToConfirm:"Enter the 6-digit code from your authenticator app to confirm setup.",activate:"Activate",disableTotp:"Disable Authenticator",disableConfirmHint:"Enter a valid TOTP code or a backup code to disable the authenticator.",totpDisabled:"Authenticator app disabled.",emailOtpEnabled:"Email OTP enabled.",emailOtpDisabled:"Email OTP disabled.",smtpRequired:"Please configure and test SMTP settings first.",invalidCode:"Invalid code. Please try again.",enableEmailOtp:"Enable Email OTP",disableEmailOtp:"Disable Email OTP",emailSetupEnterCode:"A verification code has been sent to your email address. Enter it below to confirm you own this inbox.",verifyAndEnable:"Verify & Enable",emailDisablePasswordHint:"Enter your account password to confirm disabling email OTP.",passwordPlaceholder:"Enter your password",backupCodesTitle:"Save your backup codes",backupCodesWarning:"Save these codes somewhere safe. Each code can only be used once and they will not be shown again.",backupCodesRemaining:"{{count}} backup codes remaining",savedCodes:"I've saved my codes",regenBackup:"Regenerate Backup Codes",regenBackupHint:"Enter your current TOTP code to generate 10 new backup codes. All existing backup codes will be invalidated.",newBackupCodes:"New backup codes",linkedAccounts:"Linked SSO Accounts",linkedAccountsDesc:"These external identity providers are linked to your account.",oidcUnlinked:"Account unlinked."},oidc:{title:"SSO / OIDC Providers",desc:"Configure OpenID Connect providers to allow single sign-on via external identity providers.",addProvider:"Add Provider",newProvider:"New Provider",empty:"No OIDC providers configured yet.",created:"Provider created.",updated:"Provider updated.",deleted:"Provider deleted.",deleteTitle:"Delete Provider",deleteMessage:'Delete "{{name}}"? All linked user accounts will be disconnected.',form:{name:"Display Name",issuerUrl:"Issuer URL",clientId:"Client ID",clientSecret:"Client Secret",scopes:"Scopes",iconUrl:"Icon URL (optional)",enabled:"Enabled",autoCreate:"Auto-create users",autoCreateDesc:"Automatically create a local account on first login.",autoLink:"Auto-link existing accounts",autoLinkDesc:"Link existing local accounts by matching email on first login.",secretHint:"leave blank to keep current",secretPlaceholder:"new secret",emailClaim:"Email Claim",emailClaimDesc:"JWT claim used as email identity. Use 'preferred_username' or 'upn' for Azure Entra ID (which does not send email_verified). Only use trusted claim names.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"Require email verified",requireEmailVerifiedDesc:"Only accept the email claim when the provider marks it as verified.",requireEmailVerifiedWarning:"Warning: email will be accepted even without verification. Use only with trusted providers.",requireEmailVerifiedAutoLink:"Disable auto-link first to change this setting."}}},notification:{printStarted:{title:"Print Started",body:"{{printer}}: {{filename}} has started printing"},printCompleted:{title:"Print Completed",body:"{{printer}}: {{filename}} completed successfully"},printFailed:{title:"Print Failed",body:"{{printer}}: {{filename}} has failed"},printStopped:{title:"Print Stopped",body:"{{printer}}: {{filename}} was stopped"},printProgress:{title:"Print Progress",body:"{{printer}}: {{filename}} is {{percent}}% complete"},printerOffline:{title:"Printer Offline",body:"{{printer}} is offline"},printerError:{title:"Printer Error",body:"{{printer}}: {{error}}"},filamentLow:{title:"Low Filament",body:"{{printer}}: Filament is running low"},maintenanceDue:{title:"Maintenance Due",body:"{{printer}}: {{items}} need attention"}},errors:{generic:"Something went wrong",networkError:"Network error. Please check your connection.",notFound:"Not found",unauthorized:"Unauthorized",serverError:"Server error",validationError:"Please check your input",printerConnectionFailed:"Failed to connect to printer",saveFailed:"Failed to save changes",deleteFailed:"Failed to delete",loadFailed:"Failed to load data"},hmsErrors:{title:"Errors - {{name}}",noErrors:"No errors",viewOnWiki:"View on Bambu Lab Wiki",clearInstructions:"Clear errors on the printer to dismiss them here.",clearErrors:"Clear Errors",clearSuccess:"HMS errors cleared",clearFailed:"Failed to clear HMS errors"},mqttDebug:{title:"MQTT Debug Log",searchPlaceholder:"Search topic or payload...",noMessages:"No messages logged yet",startLoggingHint:'Click "Start Logging" to begin capturing MQTT messages',noMessagesMatch:"No messages match your filter",adjustFilterHint:"Try adjusting your search or filter criteria",incoming:"Incoming",outgoing:"Outgoing",loggingStopped:"Logging stopped",loggingActive:"Logging active - messages will auto-refresh",startLogging:"Start Logging",stopLogging:"Stop Logging",clearLog:"Clear Log",topic:"Topic",timestamp:"Timestamp",direction:"Direction",all:"All"},printerFiles:{title:"File Manager",storageUsed:"Used:",storageFree:"Free:",filterPlaceholder:"Filter files...",deleteButton:"Delete",deleteFiles:"Delete {{count}} Files",deleteFileConfirm:'Delete "{{name}}"? This cannot be undone.',deleteFilesConfirm:"Delete {{count}} selected files? This cannot be undone.",noFiles:"No files on printer",loadingFiles:"Loading files...",failedToLoad:"Failed to load files",toast:{filesDeleted:"Deleted {{count}} file(s)",deleteFailed:"Delete failed: {{error}}"}},confirm:{delete:"Are you sure you want to delete this?",unsavedChanges:"You have unsaved changes. Are you sure you want to leave?",clearQueue:"Are you sure you want to clear the queue?"},login:{title:"Bambuddy Login",subtitle:"Sign in to your account",username:"Username",usernamePlaceholder:"Enter your username",usernameOrEmail:"Username or Email",usernameOrEmailPlaceholder:"Username or @ Email",password:"Password",passwordPlaceholder:"Enter your password",signIn:"Sign in",signingIn:"Logging in...",rememberMe:"Remember Me",forgotPassword:"Forgot your password?",loginSuccess:"Logged in successfully",loginFailed:"Login failed",enterCredentials:"Please enter username and password",enterEmail:"Please enter your email address",oidcLoginFailed:"OIDC login failed",oidcErrors:{providerError:"The identity provider returned an error",missingParameters:"OIDC callback is missing required parameters",invalidState:"OIDC state is invalid or has already been used",stateExpired:"OIDC login session expired — please try again",providerNotFound:"OIDC provider not found",discoveryFailed:"Failed to fetch OIDC discovery document",invalidDiscovery:"OIDC discovery document is invalid",networkError:"Network error during OIDC token exchange",badResponse:"Unexpected response during OIDC token exchange",noIdToken:"OIDC provider did not return an ID token",validationFailed:"OIDC token validation failed",nonceMismatch:"OIDC nonce mismatch — possible replay attack",missingSubClaim:"OIDC token is missing the sub claim",noLinkedAccount:"No local account is linked to this OIDC identity",accountInactive:"Your account is inactive",userResolutionFailed:"Failed to resolve your account",internalError:"An internal error occurred during OIDC login",tokenExchangeFailed:"OIDC token exchange failed"},forgotPasswordTitle:"Forgot Password",forgotPasswordMessage:"If you've forgotten your password, please contact your system administrator to reset it.",forgotPasswordEmailMessage:"Enter your email address and we'll send you a new password.",emailAddress:"Email Address",emailPlaceholder:"your.email@example.com",cancel:"Cancel",sending:"Sending...",sendResetEmail:"Send Reset Email",howToReset:"How to reset your password:",resetStep1:"Contact your Bambuddy administrator",resetStep2:"Ask them to reset your password in User Management",resetStep3:"They can set a new temporary password for you",resetStep4:"Log in with the new password and change it in Settings",gotIt:"Got it",resetPassword:{title:"Set New Password",subtitle:"Enter and confirm your new password below.",newPassword:"New Password",newPasswordPlaceholder:"At least 8 characters",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Repeat new password",saving:"Saving…",submit:"Set New Password",backToLogin:"Back to login",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 8 characters",resetFailed:"Password reset failed. The link may have expired."},twoFA:{title:"Two-Factor Authentication",subtitle:"Your account is protected with 2FA. Enter the verification code below.",methodAuthenticator:"Authenticator App",methodEmail:"Email Code",methodBackup:"Backup Code",instructionsTotp:"Open your authenticator app and enter the 6-digit code for Bambuddy.",instructionsEmail:"A 6-digit code has been sent to your email address. It expires in 10 minutes.",instructionsEmailNotSent:"Click the button below to receive a verification code via email.",instructionsBackup:"Enter one of your 8-character backup recovery codes. Each code can only be used once.",sendCodeButton:"Send Code via Email",sendingCode:"Sending...",resendCode:"Resend code",codeLabel:"Verification Code",backupCodeLabel:"Backup Code",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verify",verifyingButton:"Verifying...",backToLogin:"← Back to login",orContinueWith:"or continue with",signInWith:"Sign in with {{provider}}",enterCode:"Please enter the verification code",sendCodeFailed:"Failed to send verification code",invalidCode:"Invalid code. Please try again."}},setup:{title:"Bambuddy Setup",subtitle:"Configure authentication for your Bambuddy instance",enableAuth:"Enable Authentication",adminAccount:"Admin Account",adminAccountDesc:"If admin users already exist, authentication will be enabled using the existing admin accounts. Leave the fields below empty to use existing admins, or enter new credentials to create a new admin user.",adminUsername:"Admin Username",adminPassword:"Admin Password",optionalIfAdminExists:"(optional if admin users exist)",adminUsernamePlaceholder:"Enter admin username (optional)",adminPasswordPlaceholder:"Enter admin password (optional)",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm admin password",settingUp:"Setting up...",completeSetup:"Complete Setup",toast:{authEnabledAdminCreated:"Authentication enabled and admin user created",authEnabledExistingAdmins:"Authentication enabled using existing admin users",setupCompleted:"Setup completed",enterBothCredentials:"Please enter both admin username and password, or leave both empty to use existing admin users",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters"}},changePassword:{title:"Change Password",currentPassword:"Current Password",currentPasswordPlaceholder:"Enter current password",newPassword:"New Password",newPasswordPlaceholder:"Enter new password (min 6 characters)",confirmPassword:"Confirm New Password",confirmPasswordPlaceholder:"Confirm new password",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters",changing:"Changing...",success:"Password changed successfully",failed:"Failed to change password"},plateAlert:{title:"Print Paused!",message:"Objects detected on build plate. The print has been automatically paused. Please clear the plate and resume the print.",understand:"I Understand"},camera:{title:"Camera View",invalidPrinterId:"Invalid printer ID",live:"Live",snapshot:"Snapshot",restartStream:"Restart stream",refreshSnapshot:"Refresh snapshot",fullscreen:"Fullscreen",exitFullscreen:"Exit fullscreen",connectingToCamera:"Connecting to camera...",capturingSnapshot:"Capturing snapshot...",connectionLost:"Connection lost",connectionFailed:"Camera connection failed",reconnecting:"Reconnecting in {{countdown}}s... (attempt {{attempt}}/{{max}})",reconnectNow:"Reconnect now",cameraUnavailable:"Camera unavailable",cameraUnavailableDesc:"Make sure the printer is powered on and connected.",noCamera:"No camera available",retry:"Retry",cameraStream:"Camera stream",zoomOut:"Zoom out",zoomIn:"Zoom in",resetZoom:"Reset zoom",recording:"Recording",startRecording:"Start Recording",stopRecording:"Stop Recording",chamberLight:"Toggle chamber light"},groups:{title:"Group Management",subtitle:"Manage permission groups for access control",backToSettings:"Back to Settings",createGroup:"Create Group",noPermission:"You do not have permission to access this page.",system:"System",noDescription:"No description",usersCount:"{{count}} users",permissionsCount:"{{count}} permissions",edit:"Edit",delete:"Delete",toast:{created:"Group created successfully",updated:"Group updated successfully",deleted:"Group deleted successfully",enterGroupName:"Please enter a group name"},modal:{editGroup:"Edit Group",createGroup:"Create Group",cancel:"Cancel",saving:"Saving...",creating:"Creating...",saveChanges:"Save Changes"},form:{groupName:"Group Name",groupNamePlaceholder:"Enter group name",systemGroupWarning:"System group names cannot be changed",description:"Description",descriptionPlaceholder:"Enter description (optional)",permissions:"Permissions ({{count}} selected)"},deleteModal:{title:"Delete Group",message:"Are you sure you want to delete this group? Users in this group will lose these permissions.",confirm:"Delete Group"},editor:{title:"Edit Group",createTitle:"Create Group",search:"Search permissions...",selectAll:"Select All",clearAll:"Clear All",permissionsSelected:"{{count}} selected",noResults:"No permissions match your search"}},users:{title:"User Management",subtitle:"Manage users and their access to your Bambuddy instance",backToSettings:"Back to Settings",createUser:"Create User",noPermission:"You do not have permission to access this page.",admin:"Admin",noGroups:"No groups",active:"Active",inactive:"Inactive",edit:"Edit",delete:"Delete",system:"System",noGroupsAvailable:"No groups available",table:{username:"Username",groups:"Groups",status:"Status",actions:"Actions"},toast:{created:"User created successfully",updated:"User updated successfully",deleted:"User deleted successfully",fillRequired:"Please fill in all required fields",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters"},modal:{createUser:"Create User",editUser:"Edit User",cancel:"Cancel",creating:"Creating...",saving:"Saving...",saveChanges:"Save Changes",advancedAuthSubtitle:"with Advanced Authentication"},form:{username:"Username",usernamePlaceholder:"Enter username",email:"Email",emailPlaceholder:"user@example.com",password:"Password",passwordPlaceholder:"Enter password",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm password",newPasswordPlaceholder:"Enter new password",confirmNewPasswordPlaceholder:"Confirm new password",leaveBlankToKeep:"leave blank to keep current",groups:"Groups",optional:"optional",autoGeneratedPassword:"A secure password will be automatically generated and emailed to the user.",passwordManagedByAdvancedAuth:'Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.',resetPassword:"Reset Password",resettingPassword:"Resetting Password..."},deleteModal:{title:"Delete User",message:"Are you sure you want to delete this user? This action cannot be undone.",confirm:"Delete User"}},streamOverlay:{title:"Stream Overlay",invalidPrinterId:"Invalid printer ID",cameraStream:"Camera stream",progress:"Progress",eta:"ETA",printerIdle:"Printer is idle",printerOffline:"Printer offline",status:{printing:"Printing",paused:"Paused",finished:"Finished",failed:"Failed",idle:"Idle",unknown:"Unknown"}},profiles:{title:"Profiles",subtitle:"Manage your slicer presets and pressure advance calibrations",tabs:{cloud:"Cloud Profiles",local:"Local Profiles",kprofiles:"K-Profiles"},localProfiles:{title:"Local Profiles",subtitle:"Import and manage slicer presets from OrcaSlicer",import:"Import Profiles",importDesc:"Drop .bbscfg, .bbsflmt, .orca_filament, .zip, or .json files here",importing:"Importing...",search:"Search local presets...",noPresets:"No local presets yet",badge:"Local",edit:"Edit",delete:"Delete",cancel:"Cancel",deleteConfirmTitle:"Delete Preset",deleteConfirm:"Are you sure you want to delete this preset? This cannot be undone.",source:"Source",inheritsFrom:"Inherits",filamentType:"Type",vendor:"Vendor",compatiblePrinters:"Printers",nozzleTemp:"Nozzle Temp",cost:"Cost",density:"Density",pressureAdvance:"Pressure Advance",filament:"Filament",process:"Process",printer:"Printer",toast:{importSuccess:"{{count}} preset(s) imported",importSkipped:"{{count}} preset(s) skipped (duplicates)",importError:"{{count}} error(s) during import",deleted:"Preset deleted",updated:"Preset updated"}},connectedAs:"Connected as",logout:"Logout",noLogoutPermission:"You do not have permission to logout",failedToLoad:"Failed to load profiles",retry:"Retry",time:{justNow:"Just now",minsAgo:"{{count}}m ago",hoursAgo:"{{count}}h ago",daysAgo:"{{count}}d ago"},toast:{loggedOut:"Logged out"},login:{title:"Connect to Bambu Cloud",subtitle:"Sync your slicer presets across devices",email:"Email",password:"Password",region:"Region",regionGlobal:"Global",regionChina:"China",verificationCode:"Verification Code",totpCode:"Authenticator Code",checkEmail:"Check your email ({{email}}) for a 6-digit code",enterTotpHint:"Enter the 6-digit code from your authenticator app",accessToken:"Access Token",accessTokenHint:"Paste your Bambu Lab access token (from Bambu Studio)",back:"Back",loginButton:"Login",verifyButton:"Verify",setTokenButton:"Set Token",useToken:"Use access token instead",useEmail:"Login with email instead",toast:{loggedIn:"Logged in successfully",codeSent:"Verification code sent to your email",enterTotp:"Enter code from your authenticator app",tokenSet:"Token set successfully"}},presets:{myPreset:"My preset (editable)",duplicate:"Duplicate",editable:"Editable",failedToLoadDetails:"Failed to load preset details",deleteConfirm:"Delete this preset?",deleteWarning:'This will permanently delete "{{name}}" from Bambu Cloud. This cannot be undone.',noDuplicatePermission:"You do not have permission to duplicate presets",noEditPermission:"You do not have permission to edit presets",noDeletePermission:"You do not have permission to delete presets",types:{filament:"Filament preset",printer:"Printer preset",process:"Process preset"},toast:{deleted:"Preset deleted",created:"Preset created",updated:"Preset updated",duplicated:"Preset duplicated",fieldAdded:'Field "{{key}}" added',exported:"Preset exported"},baseLabel:"Base: {{name}}",currentLabel:"Current: {{name}}",newPreset:"New Preset",editPreset:"Edit Preset",duplicatePreset:"Duplicate Preset",createNewPreset:"Create New Preset",customizeSettings:"Customize settings for your new preset",compareWithBase:"Compare with base preset",compare:"Compare",basePreset:"Base Preset",selectBasePreset:"Select base preset...",presetName:"Preset Name",myCustomPreset:"My custom preset",inheritsFrom:"Inherits from",dropJsonToImport:"Drop JSON to import",tabs:{common:"Common",allFields:"All Fields"},availableFields:"Available Fields",searchFieldsPlaceholder:"Search fields...",noMatchingFields:"No matching fields",allFieldsAdded:"All fields added",addCustomField:"Add custom field",yourOverrides:"Your Overrides",noOverridesYet:"No overrides yet",clickFieldsToAdd:"Click fields on the left to add them",saveAsTemplate:"Save as template",jsonTip:"Tip: Drag & drop a .json file anywhere on this modal to import settings"},cloudView:{searchPlaceholder:"Search presets...",templates:"Templates",refresh:"Refresh",newPreset:"New Preset",clearFilters:"Clear filters",compareMode:"Compare Mode",selectAnotherPreset:"Select another {{type}} preset",clickTwoPresets:"Click two presets of the same type to compare",selectFirst:"1. Select first",selectSecond:"2. Select second",compareNow:"Compare Now",lastSynced:"Last synced:",showingCount:"Showing {{showing}} of {{total}} presets",noPresetsFound:"No presets found",columns:{filament:"Filament",process:"Process",printer:"Printer"},noFilamentPresets:"No filament presets",noProcessPresets:"No process presets",noPrinterPresets:"No printer presets",filters:{type:"Type",owner:"Owner",printer:"Printer",nozzle:"Nozzle",filament:"Filament",layer:"Layer",all:"All",myPresets:"My Presets",builtIn:"Built-in",process:"Process"},noTemplatesPermission:"You do not have permission to manage templates",noRefreshPermission:"You do not have permission to refresh profiles",noCreatePermission:"You do not have permission to create presets"},templates:{title:"Quick Templates",noTemplates:"No templates yet",createFirst:"Create templates from the preset editor",typeFilter:"Type:",deleteTitle:"Delete Template",deleteWarning:"This action cannot be undone",deleteConfirm:'Are you sure you want to delete "{{name}}"?',namePlaceholder:"Template name",descriptionPlaceholder:"Description",settingsJson:"Settings (JSON)",fieldsCount:"{{count}} fields",shownInModals:"Shown in modals",hiddenInModals:"Hidden in modals",apply:"Apply",toast:{deleted:"Template deleted",updated:"Template updated",created:"Template created",applied:"Template applied"}}},support:{debugLoggingActive:"Debug logging is active",manageLogs:"Manage",collectItem7:"Printer connectivity and firmware versions",collectItem8:"Integration status (Spoolman, MQTT, HA)",collectItem9:"Network interfaces (subnets only)",collectItem10:"Python package versions",collectItem11:"Database health checks",collectItem12:"Docker environment details"},fileManager:{title:"File Manager",subtitle:"Organize and manage your print files",uploadFiles:"Upload Files",newFolder:"New Folder",folderName:"Folder Name",folderNamePlaceholder:"e.g., Functional Parts",renameFile:"Rename File",renameFolder:"Rename Folder",moveFiles:"Move {{count}} File(s)",rootNoFolder:"Root (No Folder)",current:"current",linkFolder:"Link Folder",linkFolderDescription:'Link "{{name}}" to a project or archive for quick access.',project:"Project",archive:"Archive",noProjectsFound:"No projects found",noArchivesFound:"No archives found",unlink:"Unlink",link:"Link",dragDropFiles:"Drag & drop files here",dropFilesHere:"Drop files here",orClickToBrowse:"or click to browse",allFileTypesSupported:"All file types supported. ZIP files will be extracted.",zipFilesDetected:"ZIP files detected",zipExtractOptions:"ZIP files will be extracted. Choose how to handle folder structure:",preserveZipStructure:"Preserve folder structure from ZIP",createFolderFromZip:"Create folder from ZIP filename",stlThumbnailGeneration:"STL thumbnail generation",zipMayContainStl:"ZIP files may contain STL files. Thumbnails can be generated during extraction.",thumbnailsCanBeGenerated:"Thumbnails can be generated for STL files. Large models may take longer to process.",generateThumbnailsForStl:"Generate thumbnails for STL files",threemfDetected:"3MF files detected",threemfExtractionInfo:"Printer model, material, color, and print settings will be automatically extracted from 3MF files.",willBeExtracted:"Will be extracted",filesExtracted:"{{count}} files extracted",uploadComplete:"Upload complete: {{succeeded}} succeeded",uploadFailed:"Upload failed",zipFilesFailed:"{{count}} files failed",uploading:"Uploading...",changeLink:"Change Link...",linkTo:"Link to...",linkToProjectOrArchive:"Link to project or archive",addToQueue:"Add to Queue",schedulePrint:"Schedule",generateThumbnail:"Generate Thumbnail",generateThumbnails:"Generate Thumbnails",generateThumbnailsForMissing:"Generate thumbnails for STL files missing them",gridView:"Grid view",listView:"List view",lowDiskSpaceWarning:"Low disk space warning",lowDiskSpaceDetails:"Only {{free}} free of {{total}} total. Threshold is set to {{threshold}} GB in settings.",files:"Files",folders:"Folders",size:"Size",free:"Free",allFiles:"All Files",wrap:"Wrap",enableTextWrapping:"Enable text wrapping",disableTextWrapping:"Disable text wrapping",collapse:"Collapse",collapseFoldersByDefault:"Collapse folders by default",expandFoldersByDefault:"Expand folders by default",dragToResizeTooltip:"Drag to resize, double-click to reset",searchFiles:"Search files...",allTypes:"All types",prints:"Prints",ascending:"Ascending",descending:"Descending",resultsCount:"{{showing}} of {{total}} files",selectAll:"Select All",deselectAll:"Deselect All",selected:"{{count}} selected",adding:"Adding...",loadingFiles:"Loading files...",folderIsEmpty:"Folder is empty",noFilesYet:"No files yet",folderEmptyDescription:"Upload files or move files into this folder to get started.",noFilesDescription:"Upload files to start organizing your print-related files.",noMatchingFiles:"No matching files",noMatchingFilesDescription:"No files match your current search or filter criteria.",clearFilters:"Clear filters",printedCount:"Printed {{count}}x",uploadedBy:"Uploaded By",deleteFolder:"Delete Folder",deleteFile:"Delete File",deleteFilesCount:"Delete {{count}} Files",deleteFolderConfirm:"Are you sure you want to delete this folder? All files inside will also be deleted.",deleteFileConfirm:"Are you sure you want to delete this file?",deleteFilesConfirm:"Are you sure you want to delete {{count}} selected files? This action cannot be undone.",deleting:"Deleting...",noPermissionRenameFolder:"You do not have permission to rename folders",noPermissionLinkFolder:"You do not have permission to link folders",noPermissionDeleteFolder:"You do not have permission to delete folders",noPermissionPrint:"You do not have permission to print",noPermissionAddToQueue:"You do not have permission to add to queue",noPermissionSlice:"You do not have permission to slice files",noPermissionDownload:"You do not have permission to download files",noPermissionRenameFile:"You do not have permission to rename this file",noPermissionGenerateThumbnail:"You do not have permission to generate thumbnails",noPermissionDeleteFile:"You do not have permission to delete this file",noPermissionCreateFolder:"You do not have permission to create folders",noPermissionUpload:"You do not have permission to upload files",noPermissionMoveFiles:"You do not have permission to move files",noPermissionDeleteFiles:"You do not have permission to delete files",linkExternal:"Link External",linkExternalFolder:"Link External Folder",linkExternalFolderDescription:"Mount a host directory (NAS, USB, network share) into the File Manager. Files are not copied — they are accessed directly from the original path.",externalFolderNamePlaceholder:"e.g., NAS Prints",externalPath:"Host Path",externalPathHelp:"Absolute path to the directory on the Docker host. Must be bind-mounted into the container.",readOnly:"Read Only",readOnlyHelp:"prevents uploads and deletions",showHiddenFiles:"Show hidden files (dotfiles)",externalFolder:"External Folder",scanFolder:"Scan",toast:{folderCreated:"Folder created",folderDeleted:"Folder deleted",fileDeleted:"File deleted",filesDeleted:"Deleted {{count}} files",filesMoved:"Files moved",folderLinked:"Folder linked",folderUnlinked:"Folder unlinked",externalFolderLinked:"External folder linked and scanned",folderScanned:"Scan complete: {{added}} added, {{removed}} removed",addedToQueue:"Added {{count}} file(s) to queue",addedToQueuePartial:"Added {{added}} file(s), {{failed}} failed",failedToAddToQueue:"Failed to add files: {{error}}",fileRenamed:"File renamed",folderRenamed:"Folder renamed",thumbnailsGenerated:"Generated {{count}} thumbnail(s)",thumbnailsGeneratedPartial:"Generated {{succeeded}} thumbnail(s), {{failed}} failed",noStlMissingThumbnails:"No STL files missing thumbnails",failedToGenerateThumbnails:"Failed to generate thumbnails: {{error}}",thumbnailGenerated:"Thumbnail generated",failedToGenerateThumbnail:"Failed to generate thumbnail: {{error}}"}},projects:{title:"Projects",subtitle:"Organize and track your 3D printing projects",newProject:"New Project",editProject:"Edit Project",deleteProject:"Delete Project",projectName:"Project Name",description:"Description",noProjects:"No projects yet",noProjectsFiltered:"No {{status}} projects",noProjectsFilteredHelp:"You don't have any {{status}} projects. Projects will appear here when their status changes.",createFirst:"Create your first project to start organizing related prints, tracking progress, and managing your builds.",createFirstButton:"Create Your First Project",create:"Create",files:"Files",prints:"Prints",plates:"plates",parts:"parts",lastModified:"Last Modified",deleteConfirm:"Are you sure you want to delete this project? Archives and queue items will be unlinked but not deleted.",addFiles:"Add Files",removeFile:"Remove File",viewDetails:"View Details",namePlaceholder:"e.g., Voron 2.4 Build",descriptionPlaceholder:"Optional description...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URL must start with http:// or https://",openExternalUrl:"Open project URL",coverImageLabel:"Cover photo",coverImageAlt:"Project cover photo",coverImageUpload:"Upload",coverImageReplace:"Replace",coverImageRemove:"Remove",color:"Color",targetPlates:"Target Plates",targetPlatesPlaceholder:"e.g., 25",targetPlatesHelp:"Number of print jobs",targetParts:"Target Parts",targetPartsPlaceholder:"e.g., 150",targetPartsHelp:"Total objects needed",tagsLabel:"Tags (comma-separated)",tagsPlaceholder:"e.g., voron, functional, gift",dueDate:"Due Date",priority:"Priority",priorityLow:"Low",priorityNormal:"Normal",priorityHigh:"High",priorityUrgent:"Urgent",statusActive:"Active",statusCompleted:"Completed",statusArchived:"Archived",done:"Done",completed:"completed",failed:"failed",inQueue:"in queue",noPrintsYet:"No prints yet",printJobs:"Print jobs (plates)",partsPrinted:"Parts printed",failedParts:"Failed parts",import:"Import",export:"Export",importProject:"Import project",exportAll:"Export all projects",loading:"Loading projects...",noEditPermission:"You do not have permission to edit projects",noDeletePermission:"You do not have permission to delete projects",noCreatePermission:"You do not have permission to create projects",noImportPermission:"You do not have permission to import projects",noExportPermission:"You do not have permission to export projects",toast:{created:"Project created",updated:"Project updated",deleted:"Project deleted",imported:"Project imported",multipleImported:"{{count}} projects imported",importFailed:"Import failed",exported:"Projects exported (metadata only)"}},projectDetail:{notFound:"Project not found",backToProjects:"Back to Projects",export:"Export",exportProject:"Export project",noExportPermission:"You do not have permission to export projects",noEditPermission:"You do not have permission to edit projects",partOf:"Part of:",priorityLabel:"Priority:",noPrints:"No prints in this project yet",status:{active:"Active",completed:"Completed",archived:"Archived"},priority:{low:"Low",normal:"Normal",high:"High",urgent:"Urgent"},dueDate:{overdue:"Overdue",today:"Due today",daysLeft:"{{count}} days left"},progress:{platesProgress:"Plates Progress",partsProgress:"Parts Progress",printJobs:"print jobs",parts:"parts",percentComplete:"{{percent}}% complete",remaining:"{{count}} remaining"},stats:{printJobs:"Print Jobs",total:"total",failed:"{{count}} failed",partsPrinted:"{{count}} parts printed",printTime:"Print Time",filamentUsed:"Filament Used"},cost:{title:"Cost Tracking",filamentCost:"Filament Cost",energy:"Energy",totalCost:"Total Cost",total:"Total",includesBom:"incl. BOM",budget:"Budget",remaining:"Remaining"},subProjects:{title:"Sub-projects ({{count}})"},notes:{title:"Notes",noEditPermission:"You do not have permission to edit notes",placeholder:"Add notes about this project...",empty:"No notes yet. Click Edit to add notes."},files:{title:"Files",linkFolders:"Link folders from the File Manager",forQuickAccess:"to this project for quick access.",fileCount:"{{count}} file(s)",empty:"No folders linked. Go to File Manager and link a folder to this project.",noFiles:"No files in this folder.",print:"Print Now",addToQueue:"Add to Queue"},bom:{title:"Bill of Materials",acquired:"{{completed}}/{{total}} acquired",showAll:"Show all",hideDone:"Hide done",addPart:"Add Part",noAddPermission:"You do not have permission to add parts",partNamePlaceholder:"Part name (e.g., M3x8 screws)",partName:"Part name",qty:"Qty",price:"Price ({{currency}})",sourcingUrlPlaceholder:"Sourcing URL (optional)",remarksPlaceholder:"Remarks (optional)",deletePart:"Delete Part",deleteConfirm:'Are you sure you want to delete "{{name}}"?',noUpdatePermission:"You do not have permission to update parts",noEditPermission:"You do not have permission to edit parts",noDeletePermission:"You do not have permission to delete parts",totalCost:"Total cost:",empty:"No parts in the bill of materials. Add hardware, electronics, or other components to track what needs to be sourced."},timeline:{title:"Activity Timeline",empty:"No activity yet."},template:{saveAsTemplate:"Save as Template",noCreatePermission:"You do not have permission to create templates"},queue:{title:"Queue",viewAll:"View all",printing:"{{count}} printing",queued:"{{count}} queued"},prints:{title:"Prints ({{count}})"},toast:{projectUpdated:"Project updated",partAdded:"Part added",partRemoved:"Part removed",exportFailed:"Export failed",projectExported:"Project exported",templateCreated:"Template created"}},system:{title:"System Information",version:"Version",uptime:"Uptime",cpuUsage:"CPU Usage",memoryUsage:"Memory Usage",diskUsage:"Disk Usage",networkInfo:"Network Info",logs:"Logs",debugMode:"Debug Mode",enableDebug:"Enable Debug Logging",disableDebug:"Disable Debug Logging",downloadLogs:"Download Logs",clearLogs:"Clear Logs",dockerInfo:"Docker Info",containerName:"Container Name",imageName:"Image Name",platform:"Platform",architecture:"Architecture"},library:{title:"Filament Library",addFilament:"Add Filament",editFilament:"Edit Filament",deleteFilament:"Delete Filament",vendor:"Vendor",material:"Material",color:"Color",kFactor:"K Factor",temperature:"Temperature",noFilaments:"No filaments in library",deleteConfirm:"Are you sure you want to delete this filament?",importFromPrinter:"Import from Printer",exportToFile:"Export to File"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Spoolman Integration",enabled:"Spoolman Enabled",url:"Spoolman URL",connected:"Connected",disconnected:"Not Connected",testConnection:"Test Connection",sync:"Sync",syncing:"Syncing...",lastSync:"Last Sync",linkToSpoolman:"Link to Spoolman",openInSpoolman:"Open in Spoolman",unlinkSpool:"Unlink Spool",unlinkConfirmTitle:"Unlink Spool?",unlinkConfirmMessage:"This will disconnect the spool from Spoolman. The spool data in Spoolman will remain unchanged.",selectSpool:"Select Spool",noUnlinkedSpools:"No unlinked spools available",linkSuccess:"Spool linked to Spoolman successfully",linkFailed:"Failed to link spool",unlinkSuccess:"Spool unlinked from Spoolman successfully",unlinkFailed:"Failed to unlink spool",spoolId:"Spool ID",fillSourceLabel:"(Spoolman)",weight:"Weight",remaining:"Remaining",disableWeightSync:"Disable AMS Estimated Weight Sync",disableWeightSyncDesc:"Don't update remaining capacity from AMS estimates. Use this if you prefer Spoolman's usage tracking over AMS percentage-based estimates. New spools will still use the AMS estimate as their initial weight.",reportPartialUsage:"Report Partial Usage for Failed Prints",reportPartialUsageDesc:"When a print fails or is cancelled, report the estimated filament used up to that point based on layer progress."},inventory:{title:"Spool Inventory",spoolmanMixedContentTitle:"Spoolman can't load over HTTPS — mixed-content blocked by your browser",spoolmanMixedContentBody:"Bambuddy is served over HTTPS (via your reverse proxy), but your Spoolman URL is still plain HTTP. Browsers block mixed content for security, so the embedded Spoolman UI can't render. Spoolman needs to be reachable over HTTPS for this to work.",spoolmanMixedContentFixReverseProxy:"Put Spoolman behind the same reverse proxy as Bambuddy (Traefik / Nginx / Caddy) with HTTPS, then update the Spoolman URL in Settings to the new HTTPS address.",spoolmanMixedContentFixOpenNewTab:"As a workaround, open Spoolman in a new browser tab over HTTP — mixed-content rules only apply to embedded frames, so a standalone tab still works.",spoolmanOpenInNewTab:"Open Spoolman in a new tab",addSpool:"Add Spool",editSpool:"Edit Spool",material:"Material",selectMaterial:"Select material...",subtype:"Subtype",brand:"Brand",searchBrand:"Search brand...",useCustomBrand:'Use "{{brand}}"',useCustomMaterial:"Use custom material: {{material}}",colorName:"Color Name",colorNamePlaceholder:"Jade White, Fire Red...",color:"Color",hexColor:"Hex Color",pickColor:"Pick custom color",labelWeight:"Label Weight",coreWeight:"Empty Spool Weight",searchSpoolWeight:"Search spool weight...",weightUsed:"Used",currentWeight:"Remaining Weight",measuredWeight:"Measured Weight",spoolName:"Spool",costPerKg:"Cost per kg",measuredWeightError:"Measured weight must be between {{min}}g and {{max}}g.",slicerFilament:"Slicer Filament",slicerFilamentName:"Slicer Preset Name",slicerPreset:"Slicer Preset",searchPresets:"Search filament presets...",selectedPreset:"Selected",noPresetsFound:"No presets found",tempOverrides:"Temperature Overrides",note:"Note",notePlaceholder:"Any additional notes about this spool...",category:"Category",categoryPlaceholder:"e.g. Production, Prototype, Client A",categoryNone:"Uncategorized",lowStockThresholdOverride:"Low-stock threshold (this spool)",lowStockThresholdOverrideHelp:"Leave blank to use the global threshold ({{global}}%).",clearRfid:"Clear RFID Tag",rfidCleared:"RFID tag cleared",archive:"Archive",restore:"Restore",noSpools:"No spools yet. Add your first spool to get started.",noAvailableSpools:"No spools available. Add a spool to your inventory or unassign one from another slot first.",kProfiles:"K-Profiles",addKProfile:"Add K-Profile",assignSpool:"Assign Spool",unassignSpool:"Unassign",assignSuccess:"Spool assigned and AMS slot configured",assignFailed:"Failed to assign spool",selectSpool:"Select a spool to assign to this slot",assigned:"Assigned",assigning:"Assigning...",searchSpools:"Search spools...",showAllSpools:"Show all spools",allMaterials:"All Materials",filterByBrand:"Filter by brand...",showArchived:"Show archived",quickAdd:"Quick Add (Stock)",quantity:"Quantity",stock:"Stock",configured:"Configured",spoolsCreated:"{{count}} spools created",spoolCreated:"Spool created",spoolUpdated:"Spool updated",spoolDeleted:"Spool deleted",spoolArchived:"Spool archived",spoolRestored:"Spool restored",deleteConfirm:"Are you sure you want to delete this spool? This cannot be undone.",archiveConfirm:"Are you sure you want to archive this spool?",advancedSettings:"Advanced Settings",filamentInfoTab:"Filament Info",paProfileTab:"PA Profile",filamentInfo:"Filament",additional:"Additional",loadingPresets:"Loading cloud presets...",cloudConnected:"Cloud connected",cloudNotConnected:"Cloud not connected (using defaults)",recentColors:"Recent",searchColors:"Search colors...",searchResults:"Search results",allColors:"All colors",commonColors:"Common colors",showLess:"Show less",showAll:"Show all",noColorsFound:"No colors match your search",noResults:"No matches found",extraColorsLabel:"Extra colours",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.",extraColorsInvalid:"Ignored invalid hex: {{tokens}}",colorEffectLabel:"Effect",colorEffect:{none:"None",sparkle:"Sparkle",wood:"Wood",marble:"Marble",glow:"Glow",matte:"Matte",silk:"Silk",galaxy:"Galaxy",rainbow:"Rainbow",metal:"Metal",translucent:"Translucent",gradient:"Gradient",dualColor:"Dual Color",triColor:"Tri Color",multicolor:"Multicolor"},selectMaterialFirst:"Please select a material first in the Filament Info tab.",noPrintersConfigured:"No printers configured. Add printers to use PA profiles.",matchingFilter:"Matching",anyBrand:"Any brand",anyVariant:"Any variant",autoSelect:"Auto-select",matches:"matches",match:"match",noMatches:"No matches",connected:"Connected",offline:"Offline",printerOffline:"Printer is offline. Connect to view calibration profiles.",noKProfilesMatch:"No K-profiles match the selected filament.",leftNozzle:"Left Nozzle",rightNozzle:"Right Nozzle",profilesSelected:"calibration profile(s) selected",totalInventory:"Total Inventory",totalConsumed:"Total Consumed",byMaterial:"By Material",inPrinter:"In Printer",lowStock:"Low Stock",sinceTracking:"Since tracking started",loadedInAms:"Loaded in AMS/Ext",remaining:"Remaining",weightCheck:"Weight Check",lastWeighed:"Last weighed",neverWeighed:"Never weighed",search:"Search spools...",showing:"Showing",to:"to",of:"of",show:"Show",spools:"spools",spool:"spool",page:"Page",noSpoolsMatch:"No results found",noSpoolsMatchDesc:"Try adjusting your search or filters to find what you're looking for.",active:"Active",archived:"Archived",all:"All",used:"Used",new:"New",clearFilters:"Clear filters",table:"Table",cards:"Cards",net:"Net",groupSimilar:"Group",groupedSpools:"{{count}} identical spools",groupedRows:"rows",columns:"Columns",configureColumns:"Configure Columns",configureColumnsDesc:"Drag to reorder columns or use arrows. Toggle visibility with the eye icon.",visible:"visible",reset:"Reset",cancel:"Cancel",applyChanges:"Apply Changes",moveUp:"Move up",moveDown:"Move down",hideColumn:"Hide column",showColumn:"Show column",linkToSpool:"Link to Spool",tagLinked:"Tag linked to spool",tagLinkFailed:"Failed to link tag",tagAlreadyLinked:"Tag already linked to another spool",unknownTag:"Unknown RFID tag detected",usageHistory:"Usage History",noUsageHistory:"No usage recorded yet",printName:"Print Name",weightConsumed:"Weight Consumed",clearHistory:"Clear",historyCleared:"Usage history cleared",fillSourceLabel:"(Inv)",lowStockThresholdError:"Threshold must be between 0.1 and 99.9",assignMismatchTitle:"Material mismatch",assignMismatchMessage:'The selected spool material "{{spoolMaterial}}" does not match the tray material "{{trayMaterial}}" for {{location}}. Assign anyway?',assignMismatchConfirm:"Assign Anyway",assignPartialMismatchMessage:'The spool material "{{spoolMaterial}}" is similar to but not exactly matching "{{trayMaterial}}" in {{location}}. Do you want to proceed?',assignProfileMismatchMessage:'The spool profile "{{spoolProfile}}" does not match the tray profile "{{trayProfile}}" in {{location}}. Do you want to proceed?'},timelapse:{title:"Timelapse",create:"Create Timelapse",download:"Download",delete:"Delete",preview:"Preview",frameRate:"Frame Rate",quality:"Quality",processing:"Processing...",noTimelapses:"No timelapses available"},ams:{title:"AMS",slot:"Slot",empty:"Empty",emptySlot:"Empty slot",unknown:"Unknown",humidity:"Humidity",temperature:"Temperature",filamentType:"Filament Type",filamentColor:"Color",remaining:"Remaining",history:"AMS History",noHistory:"No history available",configureSlot:"Configure Slot",externalSpool:"External Spool",profile:"Profile",kFactor:"K Factor",fill:"Fill",configure:"Configure",used:"used",remainingUnit:"remaining"},printModal:{title:"Start Print",selectPrinter:"Select Printer",selectPlate:"Select Plate",filamentMapping:"Filament Mapping",totalCost:"Total cost:",slotRemainingShort:" - {{grams}}g left",printSettings:"Print Settings",bedLeveling:"Bed Leveling",flowCalibration:"Flow Calibration",vibrationCalibration:"Vibration Calibration",layerInspection:"First Layer Inspection",timelapse:"Timelapse",startPrint:"Start Print",addToQueue:"Add to Queue",cancel:"Cancel",noPrintersAvailable:"No printers available",printerBusy:"Printer is busy",printerOffline:"Printer is offline",sameTypeDifferentColor:"Same type, different color",filamentTypeNotLoaded:"Filament type not loaded",openCalendar:"Open calendar",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Left nozzle",rightNozzleTooltip:"Right nozzle",filamentOverride:"Filament Override",filamentOverrideHint:"Optionally override filaments for model-based assignment. The scheduler will match against your selected filaments instead of the original 3MF values.",originalFilament:"Original",overrideWith:"Override with",resetToOriginal:"Reset to original",insufficientFilamentTitle:"Not enough filament",insufficientFilamentMessage:"Some assigned spools have less filament remaining than this print needs:",insufficientFilamentLine:"{{printer}} - {{slot}}: needs {{required}}g, remaining {{remaining}}g",printAnyway:"Print anyway",forceColorMatch:"Force color match",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Stagger to {{count}} printers",gcodeInjection:"Inject auto-print G-code"},backup:{title:"Backup & Restore",createBackup:"Create Backup",restoreBackup:"Restore Backup",restoreDescription:"Replace all data from a backup file",downloadBackup:"Download Backup",uploadBackup:"Upload Backup",lastBackup:"Last Backup",autoBackup:"Auto Backup",backupNow:"Backup Now",restoreWarning:"Warning: Restoring a backup will overwrite all current data.",includeArchives:"Include Archives",includeSettings:"Include Settings",includeProfiles:"Include Profiles",backupSuccess:"Backup created successfully",restoreSuccess:"Backup restored successfully",backupFailed:"Backup failed",restoreFailed:"Restore failed",restoreNote:"Virtual Printer will be stopped during restore",githubBackup:"GitHub Backup",enabled:"Enabled",cloudLoginRequired:"Bambu Cloud login required. Sign in under Profiles → Cloud Profiles to enable GitHub backup.",cloudLoginRequiredShort:"Cloud login required",githubDescription:"Automatically sync your profiles to a private GitHub repository for backup and version history.",repositoryUrl:"Repository URL",personalAccessToken:"Personal Access Token",tokenSaved:"(saved)",enterNewToken:"Enter new token to update",tokenHint:"Fine-grained token with Contents read/write permission",branch:"Branch",manualOnly:"Manual only",hourly:"Hourly",daily:"Daily",weekly:"Weekly",includeInBackup:"Include in backup",kProfiles:"K-Profiles",kProfilesDescription:"Pressure advance calibration from connected printers",noPrintersConnected:"No printers connected",printersConnected:"{{connected}}/{{total}} connected",cloudProfiles:"Cloud Profiles",cloudProfilesDescription:"Filament, printer, and process presets from Bambu Cloud",appSettings:"App Settings",appSettingsDescription:"Bambuddy configuration (complete database)",spoolInventory:"Spool Inventory",spoolInventoryDescription:"Filament spools, usage history, and cost tracking",printArchives:"Print Archives",printArchivesDescription:"Print history metadata (no gcode/3MF files)",lastBackupAt:"Last backup:",noBackupsYet:"No backups yet",next:"Next:",startingBackup:"Starting backup...",test:"Test",enableBackup:"Enable Backup",testConnection:"Test Connection",enterRepoUrl:"Enter repository URL",enterRepoAndToken:"Enter repository URL and access token",repoRequired:"Repository URL is required",tokenRequired:"Access token is required",githubBackupEnabled:"GitHub backup enabled",tokenUpdated:"Token updated",settingsSaved:"Settings saved",failedToSave:"Failed to save: {{message}}",backupCompleteFiles:"Backup complete - {{count}} files updated",backupSkippedNoChanges:"Backup skipped - no changes",backupFailed2:"Backup failed: {{message}}",clearedLogs:"Cleared {{count}} logs",failedToClearLogs:"Failed to clear logs: {{message}}",history:"History",clear:"Clear",date:"Date",status:"Status",commit:"Commit",localBackup:"Local Backup",localBackupDescription:"Create a complete backup of your Bambuddy data including the database, archives, uploads, and all files.",downloadBackupLabel:"Download Backup",completeBackupZip:"Complete backup: database + all files (ZIP)",download:"Download",preparingBackup:"Preparing backup...",creatingArchive:"Creating backup archive... This may take a while for large archives.",downloadingFile:"Downloading backup file...",backupDownloaded:"Backup downloaded successfully",failedToCreateBackup:"Failed to create backup: {{message}}",restore:"Restore",restoreReplacesAll:"Restore replaces all data.",restoreReplacesAllDetail:"Your current database and files will be completely replaced. A restart is required after restore.",restoreConfirmTitle:"Restore Backup",restoreConfirmMessage:'Are you sure you want to restore from "{{filename}}"? This will completely replace your current database and all files. The application will need to be restarted after restore.',restoreConfirmButton:"Restore Backup",uploadingFile:"Uploading backup file...",backupRestoredRestart:"Backup restored. Please restart Bambuddy.",failedToRestore:"Failed to restore backup. Please check the file format.",reloadNow:"Reload Now",creatingBackup:"Creating Backup",restoringBackup:"Restoring Backup",preparing:"Preparing...",processing:"Processing...",doNotClosePage:"Please do not close this page or navigate away. This operation may take several minutes for large backups.",restoring:"Restoring...",restoreComplete:"Restore Complete",restoreFailed2:"Restore Failed",importSettings:"Import settings from a backup file",pleaseWaitRestoring:"Please wait while your data is being restored",selectBackupFile:"Click to select backup file (.json or .zip)",duplicateHandling:"How duplicate handling works:",matchPrinters:"Printers",matchPrintersBy:"matched by serial number",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"matched by IP address",matchNotificationProviders:"Notification Providers",matchNotificationProvidersBy:"matched by name",matchFilaments:"Filaments",matchFilamentsBy:"matched by name + type + brand",matchArchives:"Archives",matchArchivesBy:"matched by content hash (always skipped)",matchPendingUploads:"Pending Uploads",matchPendingUploadsBy:"matched by filename",matchSettingsTemplates:"Settings & Templates",matchSettingsTemplatesBy:"always overwritten",replaceExisting:"Replace existing data",keepExisting:"Keep existing data",overwriteDescription:"Overwrite items that already exist with backup data",keepDescription:"Only restore items that don't already exist",overwriteCaution:"Caution:",overwriteWarning:"Overwriting will replace your current configurations with data from the backup. Printer access codes are never overwritten for security.",cancel:"Cancel",processingBackup:"Processing backup file...",itemsRestored:"Items Restored",itemsSkipped:"Items Skipped",restored:"Restored",skippedAlreadyExist:"Skipped (already exist)",filesCategory:"Files (3MF, thumbnails, etc.)",andMore:"...and {{count}} more",newApiKeysGenerated:"New API Keys Generated",keysShownOnce:"These keys are only shown once. Copy them now!",copy:"Copy",noDataFound:"No data was found to restore in the backup file.",close:"Close",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Settings",notification_providers:"Notification Providers",notification_templates:"Notification Templates",smart_plugs:"Smart Plugs",printers:"Printers",filaments:"Filaments",maintenance_types:"Maintenance Types",archives:"Archives",projects:"Projects",pending_uploads:"Pending Uploads",external_links:"External Links",api_keys:"API Keys"}},tags:{title:"Tags",addTag:"Add Tag",editTag:"Edit Tag",deleteTag:"Delete Tag",tagName:"Tag Name",tagColor:"Tag Color",noTags:"No tags",deleteConfirm:"Are you sure you want to delete this tag?",manageTags:"Manage Tags"},uploadModal:{title:"Upload 3MF Files",dragDrop:"Drag & drop .3mf files here",or:"or",browseFiles:"Browse Files",extractionInfo:"The printer model will be automatically extracted from the 3MF file metadata.",uploaded:"uploaded",failed:"failed",uploading:"Uploading...",upload:"Upload",uploadFailed:"Upload failed"},editArchive:{title:"Edit Archive",name:"Name",namePlaceholder:"Print name",printer:"Printer",noPrinter:"No printer",project:"Project",noProject:"No project",itemsPrinted:"Items Printed",itemsPrintedHelp:"Number of items produced in this print job",notes:"Notes",notesPlaceholder:"Add notes about this print...",externalLink:"External Link",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link to Printables, Thingiverse, or other source",tags:"Tags",tagsPlaceholder:"Add tags...",addMoreTags:"Add more tags...",matchingTags:'Matching "{{query}}"',existingTags:"Existing tags",clickToAdd:"(click to add)",status:"Status",failureReason:"Failure Reason",selectReason:"Select reason...",photos:"Photos of Printed Result",photosHelp:"Click + to add photos of your printed result",printResult:"Print result",saving:"Saving...",failureReasons:{adhesionFailure:"Adhesion failure",spaghettiDetached:"Spaghetti / Detached",layerShift:"Layer shift",cloggedNozzle:"Clogged nozzle",filamentRunout:"Filament runout",warping:"Warping",stringing:"Stringing",underExtrusion:"Under-extrusion",powerFailure:"Power failure",userCancelled:"User cancelled",other:"Other"},statuses:{completed:"Completed",failed:"Failed",aborted:"Cancelled",printing:"Printing"}},kProfiles:{title:"K-Profiles",noPrintersConfigured:"No Printers Configured",addPrinterInSettings:"Add a printer in Settings to manage K-profiles",noActivePrinters:"No Active Printers",enablePrinterConnection:"Enable a printer connection to view its K-profiles",loadingProfiles:"Loading K-Profiles...",printerOffline:"Printer Offline",printerOfflineDesc:"The selected printer is not connected. Power it on to view K-profiles.",noMatchingProfiles:"No Matching Profiles",noMatchingProfilesDesc:"No profiles match your search criteria",noKProfiles:"No K-Profiles",noKProfilesDesc:"No pressure advance profiles found for {{diameter}}mm nozzle",createFirstProfile:"Create First Profile",printer:"Printer",nozzle:"Nozzle",refresh:"Refresh",addProfile:"Add Profile",export:"Export",import:"Import",select:"Select",selectAll:"Select All",delete:"Delete",searchPlaceholder:"Search by name or filament...",allExtruders:"All Extruders",leftOnly:"Left Only",rightOnly:"Right Only",allFlow:"All Flow",hfOnly:"HF Only",sOnly:"S Only",sortName:"Sort: Name",sortKValue:"Sort: K-Value",sortFilament:"Sort: Filament",leftExtruder:"Left Extruder",rightExtruder:"Right Extruder",modal:{addTitle:"Add K-Profile",editTitle:"Edit K-Profile",profileName:"Profile Name",profileNamePlaceholder:"My PLA Profile",kValue:"K-Value",kValuePlaceholder:"0.020",kValueHelp:"Typical range: 0.01 - 0.06 for PLA, 0.02 - 0.10 for PETG",filament:"Filament",selectFilament:"Select filament...",noFilamentsHelp:"No filaments found. Create a K-profile in Bambu Studio first.",flowType:"Flow Type",highFlow:"High Flow",standard:"Standard",nozzleSize:"Nozzle Size",extruder:"Extruder",extruders:"Extruders",left:"Left",right:"Right",notes:"Notes (stored locally)",notesPlaceholder:"Add notes about this profile...",notesHelp:"Notes are saved in Bambuddy, not on the printer",syncing:"Syncing with printer...",savingExtruder:"Saving to extruder {{current}}/{{total}}...",pleaseWait:"Please wait"},deleteConfirm:{title:"Delete Profile",cannotUndo:"This cannot be undone",message:'Are you sure you want to delete "{{name}}" from the printer?'},bulkDelete:{title:"Delete Profiles",cannotUndo:"This cannot be undone",message:"Are you sure you want to delete {{count}} selected profiles from the printer?"},toast:{profileSaved:"K-profile saved",profilesSaved:"K-profile saved to {{count}} extruders",selectAtLeastOneExtruder:"Please select at least one extruder",profileDeleted:"K-profile deleted",profilesDeleted:"Deleted {{count}} profiles",exportedProfiles:"Exported {{count}} profiles",importedProfiles:"Imported {{count}} of {{total}} profiles",noProfilesToExport:"No profiles to export",invalidFileFormat:"Invalid file format",failedToParseImport:"Failed to parse import file",failedToSaveBatch:"Failed to save K-profiles",noteSaved:"Note saved",failedToSaveNote:"Failed to save note"},permission:{noRead:"You do not have permission to refresh profiles",noCreate:"You do not have permission to add profiles",noUpdate:"You do not have permission to update K-profiles",noDelete:"You do not have permission to delete K-profiles",noExport:"You do not have permission to export profiles",noImport:"You do not have permission to import profiles"}},virtualPrinter:{title:"Virtual Printer",running:"Running",stopped:"Stopped",description:{default:"Enable a virtual printer that appears in Bambu Studio and OrcaSlicer. Files sent to this printer will be archived directly without printing.",proxy:"Enable a proxy that relays slicer traffic to a real printer, allowing remote printing over any network."},enable:{title:"Enable Virtual Printer",visibleInSlicer:'Visible as "Bambuddy" in slicer discovery',proxyingTo:"Proxying to {{name}}",notActive:"Not active"},model:{title:"Printer Model",description:"Select which printer model to emulate.",restartWarning:"Changing the model will restart the virtual printer"},accessCode:{title:"Access Code",isSet:"Access code is set",notSet:"No access code set - required to enable",placeholder:"Enter 8-char code",placeholderChange:"Enter new code to change",hint:"Must be exactly 8 characters. Used by slicers to authenticate.",charCount:"({{count}}/8)"},targetPrinter:{title:"Target Printer",configured:"Proxy target configured",notConfigured:"No target printer selected - required for proxy mode",placeholder:"Select a printer...",hint:"Select the printer to proxy slicer traffic to. The printer must be in LAN mode.",noPrinters:"No printers configured. Add a printer first to use proxy mode."},remoteInterface:{title:"Network Interface Override",configured:"Interface override active",optional:"Optional - use if auto-detected IP is wrong (e.g. multiple NICs, Docker, VPN)",placeholder:"Auto-detect (default)...",hint:"Override the IP address advertised via SSDP and used in the TLS certificate. Useful when Bambuddy has multiple network interfaces."},mode:{title:"Mode",archive:"Archive",archiveDesc:"Archive files immediately",review:"Review",reviewDesc:"Review before archiving",queue:"Queue",queueDesc:"Archive and add to queue",proxy:"Proxy",proxyDesc:"Relay to real printer"},autoDispatch:{title:"Auto-dispatch",description:"Automatically start prints when added to queue. When off, prints wait for manual dispatch."},tailscaleDisabled:{title:"Tailscale integration",description:"When enabled, uses Tailscale for trusted TLS certs. Disable to use self-signed cert only."},setupRequired:{title:"Setup Required",description:"The virtual printer feature requires additional system configuration before it will work. This includes port forwarding, firewall rules, and platform-specific settings.",readGuide:"Read the setup guide before enabling"},archiveNameSource:{title:"Archive name source",description:'Choose how new archives are named when files arrive via the virtual printer. "Metadata" uses the slicer-embedded title from the 3MF (default). "Filename" uses the filename Bambu Studio sent over FTP — handy if you renamed the job in the "send to printer" dialog.',metadata:"Metadata",filename:"Filename"},howItWorks:{title:"How it works",step1:"On the same LAN, virtual printers appear in your slicer (Bambu Studio / OrcaSlicer) automatically via discovery. From other networks, add them manually by IP address and access code.",step2:'In Archive, Review, and Queue modes, use the "Send" button in your slicer to upload 3MF files to Bambuddy. The slicer will show "Print success" — the file is stored, not printed.',step3:"In Proxy mode, the virtual printer relays all traffic to a real printer — prints start immediately as if connected directly."},status:{title:"Status Details",printerName:"Printer Name",model:"Model",serialNumber:"Serial Number",mode:"Mode",pendingFiles:"Pending Files",targetPrinter:"Target Printer",ftpPort:"FTP Port",mqttPort:"MQTT Port",ftpConnections:"FTP Connections",mqttConnections:"MQTT Connections"},toast:{updated:"Virtual printer settings updated",failedToUpdate:"Failed to update settings",tailscaleNotAvailable:"Tailscale is not installed on this host. Install Tailscale first, then try again.",copyFailed:"Failed to copy — try selecting the text manually",accessCodeRequired:"Please set an access code first",targetPrinterRequired:"Please select a target printer first",bindIpRequired:"Please set a bind IP first",accessCodeEmpty:"Access code cannot be empty",accessCodeLength:"Access code must be exactly 8 characters",created:"Virtual printer created",failedToCreate:"Failed to create virtual printer",deleted:"Virtual printer deleted",failedToDelete:"Failed to delete virtual printer"},list:{title:"Virtual Printers",add:"Add",addFirst:"Add Virtual Printer",empty:"No virtual printers configured. Add one to get started."},bindIp:{title:"Bind Interface",placeholder:"Select interface...",hint:"Network interface for this virtual printer to bind to. Must be unique per printer."},proxy:{accessCodeHint:"In proxy mode, use your target printer's access code in the slicer. The connection is forwarded transparently to the real printer."},addDialog:{title:"Add Virtual Printer",name:"Name",hint:"You can configure access code, target printer, and other settings after creating.",create:"Create"},deleteConfirm:{title:"Delete Virtual Printer",message:'Are you sure you want to delete "{{name}}"? This will stop all services for this printer.'}},modelViewer:{openInSlicer:"Open in Slicer",tabs:{model:"3D Model",gcode:"G-code Preview"},notAvailable:"not available",notSliced:"not sliced",plates:"Plates",allPlates:"All Plates",plateNumber:"Plate {{number}}",plateCount:"{{count}} plate",plateCount_other:"{{count}} plates",objectCount:"{{count}} object",objectCount_other:"{{count}} objects",filamentCount:"{{count}} filament",filamentCount_other:"{{count}} filaments",eta:"ETA {{minutes}} min",noPreview:"No preview available for this file",pagination:{pageOf:"Page {{current}} of {{total}}",prev:"Prev",next:"Next"},errors:{failedToLoad:"Failed to load file",noMeshes:"No meshes found in 3MF file",unsupportedFormat:"Unsupported file format"}},maintenanceDescriptions:{lubricateCarbonRods:"Apply lubricant to carbon rods for smooth motion",lubricateRails:"Apply lubricant to linear rails for smooth motion",cleanNozzle:"Clean hotend and nozzle to prevent clogs",checkBelts:"Verify belt tension for accurate prints",cleanBuildPlate:"Clean build plate for better adhesion",checkExtruder:"Inspect extruder gears for wear",checkCooling:"Ensure cooling fans are working properly",generalInspection:"General printer inspection",cleanCarbonRods:"Clean carbon rods to reduce friction",lubricateSteelRods:"Apply lubricant to steel rods for smooth motion",cleanSteelRods:"Clean steel rods to reduce friction",cleanLinearRails:"Wipe linear rails to remove dust and debris",checkPtfeTube:"Inspect PTFE tube for wear or damage",replaceHepaFilter:"Replace HEPA filter for air quality",replaceCarbonFilter:"Replace activated carbon filter",lubricateLeftNozzleRail:"Lubricate left nozzle rail (H2 series)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Open plug admin page",deleteSmartPlug:"Delete Smart Plug",turnOnSmartPlug:"Turn On Smart Plug",turnOffSmartPlug:"Turn Off Smart Plug",turnOn:"Turn On",turnOff:"Turn Off",addSmartPlug:{scanningNetwork:"Scanning network...",chooseEntity:"Choose an entity...",connectionFailed:"Connection failed",searchEntities:"Search entities...",searchPowerSensors:"Search power sensors...",searchEnergySensors:"Search energy sensors...",placeholders:{plugName:"Living Room Plug",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Same as power topic, or different"}},linkedTo:"Linked to:",monitorOnly:"Monitor Only",alerts:"Alerts",scheduleOn:"On {{time}}",scheduleOff:"Off {{time}}",on:"On",off:"Off",power:"Power",kwhToday:"kWh Today",settings:"Settings",automationSettings:"Automation Settings",showInSwitchbar:"Show in Switchbar",quickAccessSidebar:"Quick access from sidebar",enabled:"Enabled",enableAutomation:"Enable automation for this plug",autoOn:"Auto On",autoOnDescription:"Turn on when print starts",autoOff:"Auto Off",autoOffDescription:"Turn off when print completes (one-shot)",autoOffPersistent:"Keep Enabled",autoOffPersistentDescription:"Stay enabled between prints instead of one-shot",turnOffDelayMode:"Turn Off Delay Mode",time:"Time",temp:"Temp",delayMinutes:"Delay (minutes)",tempThreshold:"Temperature threshold (°C)",tempThresholdDescription:"Turns off when nozzle cools below this temperature",edit:"Edit",deleteConfirm:'Are you sure you want to delete "{{name}}"? This cannot be undone.',turnOnConfirm:'Are you sure you want to turn on "{{name}}"?',turnOffConfirm:'Are you sure you want to turn off "{{name}}"? This will cut power to the connected device.',failedToTurn:'Failed to turn {{action}} "{{name}}"',unknown:"Unknown",addTitle:"Add Smart Plug",editTitle:"Edit Smart Plug",stopScanning:"Stop Scanning",discoverTasmota:"Discover Tasmota Devices",foundDevices:"Found {{count}} device(s) - click to select:",noDevicesFound:"No Tasmota devices found on your network",haNotConfigured:"Home Assistant is not configured. Set it up in",haSettingsPath:"Settings → Network → Home Assistant",selectEntity:"Select Entity *",ipAddress:"IP Address *",nameLabel:"Name *",username:"Username",password:"Password",authHint:"Leave empty if your Tasmota device doesn't require authentication",linkToPrinter:"Link to Printer",noPrinter:"No printer (manual control only)",linkingDescription:"Linking enables automatic on/off when prints start/complete",powerAlerts:"Power Alerts",alertAbove:"Alert if above (W)",alertBelow:"Alert if below (W)",alertDescription:"Get notified when power consumption crosses these thresholds. Leave empty to disable that direction.",dailySchedule:"Daily Schedule",turnOnAt:"Turn On at",turnOffAt:"Turn Off at",scheduleDescription:"Automatically turn the plug on/off at these times daily. Leave empty to skip that action.",showOnPrinterCard:"Show on Printer Card",displayOnPrinterCard:"Display button on printer card",connectedResult:"Connected!",deviceLabel:"Device: {{name}} - ",stateLabel:"State: {{state}}",test:"Test",delete:"Delete",save:"Save",add:"Add",cancel:"Cancel",failedToStartScan:"Failed to start scan",nameRequired:"Name is required",entityRequired:"Entity is required for Home Assistant plugs",mqttTopicRequired:"At least one MQTT topic must be configured for power, energy, or state monitoring",loadingEntities:"Loading entities...",loading:"Loading...",failedToLoadEntities:"Failed to load entities: {{error}}",noEntitiesMatching:'No entities found matching "{{search}}"',noEntitiesAvailable:"No entities available",searchingEntities:"Searching all entities ({{count}} found)",showingEntities:"Showing switch, light, input_boolean ({{count}} available)",energyMonitoringOptional:"Energy Monitoring (Optional)",energyMonitoringHint:"Search and select sensors that provide power/energy data.",powerSensorW:"Power Sensor (W)",energyTodayKwh:"Energy Today (kWh)",totalEnergyKwh:"Total Energy (kWh)",noMatchingSensors:"No matching sensors",none:"None",mqttNotConfigured:"MQTT broker not configured. Set broker address in",mqttSettingsPath:"Settings → Network → MQTT Publishing",mqttNotConfiguredSuffix:"(you don't need to enable publishing, just fill in the broker details).",mqttMonitorOnlyDescription:"MQTT plugs receive power/energy data via MQTT subscription. On/off control is not available - use your MQTT broker or home automation system.",powerMonitoring:"Power Monitoring",energyMonitoring:"Energy Monitoring",stateMonitoring:"State Monitoring",optional:"optional",topic:"Topic",jsonPath:"JSON Path",multiplier:"Multiplier",onValue:"ON Value",mqttPowerHint:`JSON path extracts value from JSON payload (e.g., "power_l1"). Leave empty if topic publishes raw numeric values.
+`+j.stack}}var le=Object.prototype.hasOwnProperty,ye=t.unstable_scheduleCallback,he=t.unstable_cancelCallback,me=t.unstable_shouldYield,H=t.unstable_requestPaint,L=t.unstable_now,ee=t.unstable_getCurrentPriorityLevel,ge=t.unstable_ImmediatePriority,ke=t.unstable_UserBlockingPriority,je=t.unstable_NormalPriority,Te=t.unstable_LowPriority,xe=t.unstable_IdlePriority,Fe=t.log,Be=t.unstable_setDisableYieldValue,Ce=null,ze=null;function Me(h){if(typeof Fe=="function"&&Be(h),ze&&typeof ze.setStrictMode=="function")try{ze.setStrictMode(Ce,h)}catch{}}var Oe=Math.clz32?Math.clz32:ve,Ge=Math.log,et=Math.LN2;function ve(h){return h>>>=0,h===0?32:31-(Ge(h)/et|0)|0}var Xe=256,Pe=262144,Ve=4194304;function we(h){var y=h&42;if(y!==0)return y;switch(h&-h){case 1:return 1;case 2:return 2;case 4:return 4;case 8:return 8;case 16:return 16;case 32:return 32;case 64:return 64;case 128:return 128;case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:return h&261888;case 262144:case 524288:case 1048576:case 2097152:return h&3932160;case 4194304:case 8388608:case 16777216:case 33554432:return h&62914560;case 67108864:return 67108864;case 134217728:return 134217728;case 268435456:return 268435456;case 536870912:return 536870912;case 1073741824:return 0;default:return h}}function de(h,y,_){var j=h.pendingLanes;if(j===0)return 0;var V=0,Z=h.suspendedLanes,Ne=h.pingedLanes;h=h.warmLanes;var qe=j&134217727;return qe!==0?(j=qe&~Z,j!==0?V=we(j):(Ne&=qe,Ne!==0?V=we(Ne):_||(_=qe&~h,_!==0&&(V=we(_))))):(qe=j&~Z,qe!==0?V=we(qe):Ne!==0?V=we(Ne):_||(_=j&~h,_!==0&&(V=we(_)))),V===0?0:y!==0&&y!==V&&(y&Z)===0&&(Z=V&-V,_=y&-y,Z>=_||Z===32&&(_&4194048)!==0)?y:V}function Se(h,y){return(h.pendingLanes&~(h.suspendedLanes&~h.pingedLanes)&y)===0}function $e(h,y){switch(h){case 1:case 2:case 4:case 8:case 64:return y+250;case 16:case 32:case 128:case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:case 262144:case 524288:case 1048576:case 2097152:return y+5e3;case 4194304:case 8388608:case 16777216:case 33554432:return-1;case 67108864:case 134217728:case 268435456:case 536870912:case 1073741824:return-1;default:return-1}}function st(){var h=Ve;return Ve<<=1,(Ve&62914560)===0&&(Ve=4194304),h}function He(h){for(var y=[],_=0;31>_;_++)y.push(h);return y}function at(h,y){h.pendingLanes|=y,y!==268435456&&(h.suspendedLanes=0,h.pingedLanes=0,h.warmLanes=0)}function ht(h,y,_,j,V,Z){var Ne=h.pendingLanes;h.pendingLanes=_,h.suspendedLanes=0,h.pingedLanes=0,h.warmLanes=0,h.expiredLanes&=_,h.entangledLanes&=_,h.errorRecoveryDisabledLanes&=_,h.shellSuspendCounter=0;var qe=h.entanglements,lt=h.expirationTimes,vt=h.hiddenUpdates;for(_=Ne&~_;0<_;){var Rt=31-Oe(_),Ut=1<<Rt;qe[Rt]=0,lt[Rt]=-1;var kt=vt[Rt];if(kt!==null)for(vt[Rt]=null,Rt=0;Rt<kt.length;Rt++){var At=kt[Rt];At!==null&&(At.lane&=-536870913)}_&=~Ut}j!==0&&Mt(h,j,0),Z!==0&&V===0&&h.tag!==0&&(h.suspendedLanes|=Z&~(Ne&~y))}function Mt(h,y,_){h.pendingLanes|=y,h.suspendedLanes&=~y;var j=31-Oe(y);h.entangledLanes|=y,h.entanglements[j]=h.entanglements[j]|1073741824|_&261930}function qt(h,y){var _=h.entangledLanes|=y;for(h=h.entanglements;_;){var j=31-Oe(_),V=1<<j;V&y|h[j]&y&&(h[j]|=y),_&=~V}}function Vt(h,y){var _=y&-y;return _=(_&42)!==0?1:Gt(_),(_&(h.suspendedLanes|y))!==0?0:_}function Gt(h){switch(h){case 2:h=1;break;case 8:h=4;break;case 32:h=16;break;case 256:case 512:case 1024:case 2048:case 4096:case 8192:case 16384:case 32768:case 65536:case 131072:case 262144:case 524288:case 1048576:case 2097152:case 4194304:case 8388608:case 16777216:case 33554432:h=128;break;case 268435456:h=134217728;break;default:h=0}return h}function Qt(h){return h&=-h,2<h?8<h?(h&134217727)!==0?32:268435456:8:2}function an(){var h=J.p;return h!==0?h:(h=window.event,h===void 0?32:H8(h.type))}function mn(h,y){var _=J.p;try{return J.p=h,y()}finally{J.p=_}}var dn=Math.random().toString(36).slice(2),jt="__reactFiber$"+dn,Jt="__reactProps$"+dn,zt="__reactContainer$"+dn,Tt="__reactEvents$"+dn,Ie="__reactListeners$"+dn,Re="__reactHandles$"+dn,Ye="__reactResources$"+dn,Ze="__reactMarker$"+dn;function Le(h){delete h[jt],delete h[Jt],delete h[Tt],delete h[Ie],delete h[Re]}function dt(h){var y=h[jt];if(y)return y;for(var _=h.parentNode;_;){if(y=_[zt]||_[jt]){if(_=y.alternate,y.child!==null||_!==null&&_.child!==null)for(h=C8(h);h!==null;){if(_=h[jt])return _;h=C8(h)}return y}h=_,_=h.parentNode}return null}function Ae(h){if(h=h[jt]||h[zt]){var y=h.tag;if(y===5||y===6||y===13||y===31||y===26||y===27||y===3)return h}return null}function We(h){var y=h.tag;if(y===5||y===26||y===27||y===6)return h.stateNode;throw Error(r(33))}function tt(h){var y=h[Ye];return y||(y=h[Ye]={hoistableStyles:new Map,hoistableScripts:new Map}),y}function nt(h){h[Ze]=!0}var Je=new Set,Ue={};function rt(h,y){Ct(h,y),Ct(h+"Capture",y)}function Ct(h,y){for(Ue[h]=y,h=0;h<y.length;h++)Je.add(y[h])}var bt=RegExp("^[:A-Z_a-z\\u00C0-\\u00D6\\u00D8-\\u00F6\\u00F8-\\u02FF\\u0370-\\u037D\\u037F-\\u1FFF\\u200C-\\u200D\\u2070-\\u218F\\u2C00-\\u2FEF\\u3001-\\uD7FF\\uF900-\\uFDCF\\uFDF0-\\uFFFD][:A-Z_a-z\\u00C0-\\u00D6\\u00D8-\\u00F6\\u00F8-\\u02FF\\u0370-\\u037D\\u037F-\\u1FFF\\u200C-\\u200D\\u2070-\\u218F\\u2C00-\\u2FEF\\u3001-\\uD7FF\\uF900-\\uFDCF\\uFDF0-\\uFFFD\\-.0-9\\u00B7\\u0300-\\u036F\\u203F-\\u2040]*$"),Ot={},Lt={};function Ft(h){return le.call(Lt,h)?!0:le.call(Ot,h)?!1:bt.test(h)?Lt[h]=!0:(Ot[h]=!0,!1)}function Ke(h,y,_){if(Ft(y))if(_===null)h.removeAttribute(y);else{switch(typeof _){case"undefined":case"function":case"symbol":h.removeAttribute(y);return;case"boolean":var j=y.toLowerCase().slice(0,5);if(j!=="data-"&&j!=="aria-"){h.removeAttribute(y);return}}h.setAttribute(y,""+_)}}function Ht(h,y,_){if(_===null)h.removeAttribute(y);else{switch(typeof _){case"undefined":case"function":case"symbol":case"boolean":h.removeAttribute(y);return}h.setAttribute(y,""+_)}}function Yt(h,y,_,j){if(j===null)h.removeAttribute(_);else{switch(typeof j){case"undefined":case"function":case"symbol":case"boolean":h.removeAttribute(_);return}h.setAttributeNS(y,_,""+j)}}function on(h){switch(typeof h){case"bigint":case"boolean":case"number":case"string":case"undefined":return h;case"object":return h;default:return""}}function wn(h){var y=h.type;return(h=h.nodeName)&&h.toLowerCase()==="input"&&(y==="checkbox"||y==="radio")}function gn(h,y,_){var j=Object.getOwnPropertyDescriptor(h.constructor.prototype,y);if(!h.hasOwnProperty(y)&&typeof j<"u"&&typeof j.get=="function"&&typeof j.set=="function"){var V=j.get,Z=j.set;return Object.defineProperty(h,y,{configurable:!0,get:function(){return V.call(this)},set:function(Ne){_=""+Ne,Z.call(this,Ne)}}),Object.defineProperty(h,y,{enumerable:j.enumerable}),{getValue:function(){return _},setValue:function(Ne){_=""+Ne},stopTracking:function(){h._valueTracker=null,delete h[y]}}}}function _n(h){if(!h._valueTracker){var y=wn(h)?"checked":"value";h._valueTracker=gn(h,y,""+h[y])}}function xn(h){if(!h)return!1;var y=h._valueTracker;if(!y)return!0;var _=y.getValue(),j="";return h&&(j=wn(h)?h.checked?"true":"false":h.value),h=j,h!==_?(y.setValue(h),!0):!1}function br(h){if(h=h||(typeof document<"u"?document:void 0),typeof h>"u")return null;try{return h.activeElement||h.body}catch{return h.body}}var Tr=/[\n"\\]/g;function On(h){return h.replace(Tr,function(y){return"\\"+y.charCodeAt(0).toString(16)+" "})}function Ra(h,y,_,j,V,Z,Ne,qe){h.name="",Ne!=null&&typeof Ne!="function"&&typeof Ne!="symbol"&&typeof Ne!="boolean"?h.type=Ne:h.removeAttribute("type"),y!=null?Ne==="number"?(y===0&&h.value===""||h.value!=y)&&(h.value=""+on(y)):h.value!==""+on(y)&&(h.value=""+on(y)):Ne!=="submit"&&Ne!=="reset"||h.removeAttribute("value"),y!=null?Br(h,Ne,on(y)):_!=null?Br(h,Ne,on(_)):j!=null&&h.removeAttribute("value"),V==null&&Z!=null&&(h.defaultChecked=!!Z),V!=null&&(h.checked=V&&typeof V!="function"&&typeof V!="symbol"),qe!=null&&typeof qe!="function"&&typeof qe!="symbol"&&typeof qe!="boolean"?h.name=""+on(qe):h.removeAttribute("name")}function $n(h,y,_,j,V,Z,Ne,qe){if(Z!=null&&typeof Z!="function"&&typeof Z!="symbol"&&typeof Z!="boolean"&&(h.type=Z),y!=null||_!=null){if(!(Z!=="submit"&&Z!=="reset"||y!=null)){_n(h);return}_=_!=null?""+on(_):"",y=y!=null?""+on(y):_,qe||y===h.value||(h.value=y),h.defaultValue=y}j=j??V,j=typeof j!="function"&&typeof j!="symbol"&&!!j,h.checked=qe?h.checked:!!j,h.defaultChecked=!!j,Ne!=null&&typeof Ne!="function"&&typeof Ne!="symbol"&&typeof Ne!="boolean"&&(h.name=Ne),_n(h)}function Br(h,y,_){y==="number"&&br(h.ownerDocument)===h||h.defaultValue===""+_||(h.defaultValue=""+_)}function Kr(h,y,_,j){if(h=h.options,y){y={};for(var V=0;V<_.length;V++)y["$"+_[V]]=!0;for(_=0;_<h.length;_++)V=y.hasOwnProperty("$"+h[_].value),h[_].selected!==V&&(h[_].selected=V),V&&j&&(h[_].defaultSelected=!0)}else{for(_=""+on(_),y=null,V=0;V<h.length;V++){if(h[V].value===_){h[V].selected=!0,j&&(h[V].defaultSelected=!0);return}y!==null||h[V].disabled||(y=h[V])}y!==null&&(y.selected=!0)}}function ur(h,y,_){if(y!=null&&(y=""+on(y),y!==h.value&&(h.value=y),_==null)){h.defaultValue!==y&&(h.defaultValue=y);return}h.defaultValue=_!=null?""+on(_):""}function Hr(h,y,_,j){if(y==null){if(j!=null){if(_!=null)throw Error(r(92));if(ne(j)){if(1<j.length)throw Error(r(93));j=j[0]}_=j}_==null&&(_=""),y=_}_=on(y),h.defaultValue=_,j=h.textContent,j===_&&j!==""&&j!==null&&(h.value=j),_n(h)}function or(h,y){if(y){var _=h.firstChild;if(_&&_===h.lastChild&&_.nodeType===3){_.nodeValue=y;return}}h.textContent=y}var ki=new Set("animationIterationCount aspectRatio borderImageOutset borderImageSlice borderImageWidth boxFlex boxFlexGroup boxOrdinalGroup columnCount columns flex flexGrow flexPositive flexShrink flexNegative flexOrder gridArea gridRow gridRowEnd gridRowSpan gridRowStart gridColumn gridColumnEnd gridColumnSpan gridColumnStart fontWeight lineClamp lineHeight opacity order orphans scale tabSize widows zIndex zoom fillOpacity floodOpacity stopOpacity strokeDasharray strokeDashoffset strokeMiterlimit strokeOpacity strokeWidth MozAnimationIterationCount MozBoxFlex MozBoxFlexGroup MozLineClamp msAnimationIterationCount msFlex msZoom msFlexGrow msFlexNegative msFlexOrder msFlexPositive msFlexShrink msGridColumn msGridColumnSpan msGridRow msGridRowSpan WebkitAnimationIterationCount WebkitBoxFlex WebKitBoxFlexGroup WebkitBoxOrdinalGroup WebkitColumnCount WebkitColumns WebkitFlex WebkitFlexGrow WebkitFlexPositive WebkitFlexShrink WebkitLineClamp".split(" "));function Oi(h,y,_){var j=y.indexOf("--")===0;_==null||typeof _=="boolean"||_===""?j?h.setProperty(y,""):y==="float"?h.cssFloat="":h[y]="":j?h.setProperty(y,_):typeof _!="number"||_===0||ki.has(y)?y==="float"?h.cssFloat=_:h[y]=(""+_).trim():h[y]=_+"px"}function yc(h,y,_){if(y!=null&&typeof y!="object")throw Error(r(62));if(h=h.style,_!=null){for(var j in _)!_.hasOwnProperty(j)||y!=null&&y.hasOwnProperty(j)||(j.indexOf("--")===0?h.setProperty(j,""):j==="float"?h.cssFloat="":h[j]="");for(var V in y)j=y[V],y.hasOwnProperty(V)&&_[V]!==j&&Oi(h,V,j)}else for(var Z in y)y.hasOwnProperty(Z)&&Oi(h,Z,y[Z])}function yl(h){if(h.indexOf("-")===-1)return!1;switch(h){case"annotation-xml":case"color-profile":case"font-face":case"font-face-src":case"font-face-uri":case"font-face-format":case"font-face-name":case"missing-glyph":return!1;default:return!0}}var Pt=new Map([["acceptCharset","accept-charset"],["htmlFor","for"],["httpEquiv","http-equiv"],["crossOrigin","crossorigin"],["accentHeight","accent-height"],["alignmentBaseline","alignment-baseline"],["arabicForm","arabic-form"],["baselineShift","baseline-shift"],["capHeight","cap-height"],["clipPath","clip-path"],["clipRule","clip-rule"],["colorInterpolation","color-interpolation"],["colorInterpolationFilters","color-interpolation-filters"],["colorProfile","color-profile"],["colorRendering","color-rendering"],["dominantBaseline","dominant-baseline"],["enableBackground","enable-background"],["fillOpacity","fill-opacity"],["fillRule","fill-rule"],["floodColor","flood-color"],["floodOpacity","flood-opacity"],["fontFamily","font-family"],["fontSize","font-size"],["fontSizeAdjust","font-size-adjust"],["fontStretch","font-stretch"],["fontStyle","font-style"],["fontVariant","font-variant"],["fontWeight","font-weight"],["glyphName","glyph-name"],["glyphOrientationHorizontal","glyph-orientation-horizontal"],["glyphOrientationVertical","glyph-orientation-vertical"],["horizAdvX","horiz-adv-x"],["horizOriginX","horiz-origin-x"],["imageRendering","image-rendering"],["letterSpacing","letter-spacing"],["lightingColor","lighting-color"],["markerEnd","marker-end"],["markerMid","marker-mid"],["markerStart","marker-start"],["overlinePosition","overline-position"],["overlineThickness","overline-thickness"],["paintOrder","paint-order"],["panose-1","panose-1"],["pointerEvents","pointer-events"],["renderingIntent","rendering-intent"],["shapeRendering","shape-rendering"],["stopColor","stop-color"],["stopOpacity","stop-opacity"],["strikethroughPosition","strikethrough-position"],["strikethroughThickness","strikethrough-thickness"],["strokeDasharray","stroke-dasharray"],["strokeDashoffset","stroke-dashoffset"],["strokeLinecap","stroke-linecap"],["strokeLinejoin","stroke-linejoin"],["strokeMiterlimit","stroke-miterlimit"],["strokeOpacity","stroke-opacity"],["strokeWidth","stroke-width"],["textAnchor","text-anchor"],["textDecoration","text-decoration"],["textRendering","text-rendering"],["transformOrigin","transform-origin"],["underlinePosition","underline-position"],["underlineThickness","underline-thickness"],["unicodeBidi","unicode-bidi"],["unicodeRange","unicode-range"],["unitsPerEm","units-per-em"],["vAlphabetic","v-alphabetic"],["vHanging","v-hanging"],["vIdeographic","v-ideographic"],["vMathematical","v-mathematical"],["vectorEffect","vector-effect"],["vertAdvY","vert-adv-y"],["vertOriginX","vert-origin-x"],["vertOriginY","vert-origin-y"],["wordSpacing","word-spacing"],["writingMode","writing-mode"],["xmlnsXlink","xmlns:xlink"],["xHeight","x-height"]]),Dn=/^[\u0000-\u001F ]*j[\r\n\t]*a[\r\n\t]*v[\r\n\t]*a[\r\n\t]*s[\r\n\t]*c[\r\n\t]*r[\r\n\t]*i[\r\n\t]*p[\r\n\t]*t[\r\n\t]*:/i;function mr(h){return Dn.test(""+h)?"javascript:throw new Error('React has blocked a javascript: URL as a security precaution.')":h}function Wt(){}var Ms=null;function vo(h){return h=h.target||h.srcElement||window,h.correspondingUseElement&&(h=h.correspondingUseElement),h.nodeType===3?h.parentNode:h}var td=null,vl=null;function Lr(h){var y=Ae(h);if(y&&(h=y.stateNode)){var _=h[Jt]||null;e:switch(h=y.stateNode,y.type){case"input":if(Ra(h,_.value,_.defaultValue,_.defaultValue,_.checked,_.defaultChecked,_.type,_.name),y=_.name,_.type==="radio"&&y!=null){for(_=h;_.parentNode;)_=_.parentNode;for(_=_.querySelectorAll('input[name="'+On(""+y)+'"][type="radio"]'),y=0;y<_.length;y++){var j=_[y];if(j!==h&&j.form===h.form){var V=j[Jt]||null;if(!V)throw Error(r(90));Ra(j,V.value,V.defaultValue,V.defaultValue,V.checked,V.defaultChecked,V.type,V.name)}}for(y=0;y<_.length;y++)j=_[y],j.form===h.form&&xn(j)}break e;case"textarea":ur(h,_.value,_.defaultValue);break e;case"select":y=_.value,y!=null&&Kr(h,!!_.multiple,y,!1)}}}var nd=!1;function $p(h,y,_){if(nd)return h(y,_);nd=!0;try{var j=h(y);return j}finally{if(nd=!1,(td!==null||vl!==null)&&(M_(),td&&(y=td,h=vl,vl=td=null,Lr(y),h)))for(y=0;y<h.length;y++)Lr(h[y])}}function ls(h,y){var _=h.stateNode;if(_===null)return null;var j=_[Jt]||null;if(j===null)return null;_=j[y];e:switch(y){case"onClick":case"onClickCapture":case"onDoubleClick":case"onDoubleClickCapture":case"onMouseDown":case"onMouseDownCapture":case"onMouseMove":case"onMouseMoveCapture":case"onMouseUp":case"onMouseUpCapture":case"onMouseEnter":(j=!j.disabled)||(h=h.type,j=!(h==="button"||h==="input"||h==="select"||h==="textarea")),h=!j;break e;default:h=!1}if(h)return null;if(_&&typeof _!="function")throw Error(r(231,y,typeof _));return _}var $o=!(typeof window>"u"||typeof window.document>"u"||typeof window.document.createElement>"u"),zi=!1;if($o)try{var wl={};Object.defineProperty(wl,"passive",{get:function(){zi=!0}}),window.addEventListener("test",wl,wl),window.removeEventListener("test",wl,wl)}catch{zi=!1}var wo=null,ha=null,vc=null;function Im(){if(vc)return vc;var h,y=ha,_=y.length,j,V="value"in wo?wo.value:wo.textContent,Z=V.length;for(h=0;h<_&&y[h]===V[h];h++);var Ne=_-h;for(j=1;j<=Ne&&y[_-j]===V[Z-j];j++);return vc=V.slice(h,1<j?1-j:void 0)}function ru(h){var y=h.keyCode;return"charCode"in h?(h=h.charCode,h===0&&y===13&&(h=13)):h=y,h===10&&(h=13),32<=h||h===13?h:0}function rd(){return!0}function Vp(){return!1}function ka(h){function y(_,j,V,Z,Ne){this._reactName=_,this._targetInst=V,this.type=j,this.nativeEvent=Z,this.target=Ne,this.currentTarget=null;for(var qe in h)h.hasOwnProperty(qe)&&(_=h[qe],this[qe]=_?_(Z):Z[qe]);return this.isDefaultPrevented=(Z.defaultPrevented!=null?Z.defaultPrevented:Z.returnValue===!1)?rd:Vp,this.isPropagationStopped=Vp,this}return m(y.prototype,{preventDefault:function(){this.defaultPrevented=!0;var _=this.nativeEvent;_&&(_.preventDefault?_.preventDefault():typeof _.returnValue!="unknown"&&(_.returnValue=!1),this.isDefaultPrevented=rd)},stopPropagation:function(){var _=this.nativeEvent;_&&(_.stopPropagation?_.stopPropagation():typeof _.cancelBubble!="unknown"&&(_.cancelBubble=!0),this.isPropagationStopped=rd)},persist:function(){},isPersistent:rd}),y}var Es={eventPhase:0,bubbles:0,cancelable:0,timeStamp:function(h){return h.timeStamp||Date.now()},defaultPrevented:0,isTrusted:0},Vo=ka(Es),wc=m({},Es,{view:0,detail:0}),Sl=ka(wc),ad,Gp,_l,id=m({},wc,{screenX:0,screenY:0,clientX:0,clientY:0,pageX:0,pageY:0,ctrlKey:0,shiftKey:0,altKey:0,metaKey:0,getModifierState:Bm,button:0,buttons:0,relatedTarget:function(h){return h.relatedTarget===void 0?h.fromElement===h.srcElement?h.toElement:h.fromElement:h.relatedTarget},movementX:function(h){return"movementX"in h?h.movementX:(h!==_l&&(_l&&h.type==="mousemove"?(ad=h.screenX-_l.screenX,Gp=h.screenY-_l.screenY):Gp=ad=0,_l=h),ad)},movementY:function(h){return"movementY"in h?h.movementY:Gp}}),Om=ka(id),sd=m({},id,{dataTransfer:0}),od=ka(sd),au=m({},wc,{relatedTarget:0}),ci=ka(au),iu=m({},Es,{animationName:0,elapsedTime:0,pseudoElement:0}),zm=ka(iu),Ys=m({},Es,{clipboardData:function(h){return"clipboardData"in h?h.clipboardData:window.clipboardData}}),su=ka(Ys),kl=m({},Es,{data:0}),Nl=ka(kl),ou={Esc:"Escape",Spacebar:" ",Left:"ArrowLeft",Up:"ArrowUp",Right:"ArrowRight",Down:"ArrowDown",Del:"Delete",Win:"OS",Menu:"ContextMenu",Apps:"ContextMenu",Scroll:"ScrollLock",MozPrintableKey:"Unidentified"},Um={8:"Backspace",9:"Tab",12:"Clear",13:"Enter",16:"Shift",17:"Control",18:"Alt",19:"Pause",20:"CapsLock",27:"Escape",32:" ",33:"PageUp",34:"PageDown",35:"End",36:"Home",37:"ArrowLeft",38:"ArrowUp",39:"ArrowRight",40:"ArrowDown",45:"Insert",46:"Delete",112:"F1",113:"F2",114:"F3",115:"F4",116:"F5",117:"F6",118:"F7",119:"F8",120:"F9",121:"F10",122:"F11",123:"F12",144:"NumLock",145:"ScrollLock",224:"Meta"},Zg={Alt:"altKey",Control:"ctrlKey",Meta:"metaKey",Shift:"shiftKey"};function hn(h){var y=this.nativeEvent;return y.getModifierState?y.getModifierState(h):(h=Zg[h])?!!y[h]:!1}function Bm(){return hn}var Hm=m({},wc,{key:function(h){if(h.key){var y=ou[h.key]||h.key;if(y!=="Unidentified")return y}return h.type==="keypress"?(h=ru(h),h===13?"Enter":String.fromCharCode(h)):h.type==="keydown"||h.type==="keyup"?Um[h.keyCode]||"Unidentified":""},code:0,location:0,ctrlKey:0,shiftKey:0,altKey:0,metaKey:0,repeat:0,locale:0,getModifierState:Bm,charCode:function(h){return h.type==="keypress"?ru(h):0},keyCode:function(h){return h.type==="keydown"||h.type==="keyup"?h.keyCode:0},which:function(h){return h.type==="keypress"?ru(h):h.type==="keydown"||h.type==="keyup"?h.keyCode:0}}),eb=ka(Hm),Wp=m({},id,{pointerId:0,width:0,height:0,pressure:0,tangentialPressure:0,tiltX:0,tiltY:0,twist:0,pointerType:0,isPrimary:0}),Go=ka(Wp),Wo=m({},wc,{touches:0,targetTouches:0,changedTouches:0,altKey:0,metaKey:0,ctrlKey:0,shiftKey:0,getModifierState:Bm}),Sc=ka(Wo),Xy=m({},Es,{propertyName:0,elapsedTime:0,pseudoElement:0}),qm=ka(Xy),Kp=m({},id,{deltaX:function(h){return"deltaX"in h?h.deltaX:"wheelDeltaX"in h?-h.wheelDeltaX:0},deltaY:function(h){return"deltaY"in h?h.deltaY:"wheelDeltaY"in h?-h.wheelDeltaY:"wheelDelta"in h?-h.wheelDelta:0},deltaZ:0,deltaMode:0}),$m=ka(Kp),_e=m({},Es,{newState:0,oldState:0}),Et=ka(_e),Fn=[9,13,27,32],kn=$o&&"CompositionEvent"in window,it=null;$o&&"documentMode"in document&&(it=document.documentMode);var Dt=$o&&"TextEvent"in window&&!it,Xt=$o&&(!kn||it&&8<it&&11>=it),ct=" ",Mn=!1;function xr(h,y){switch(h){case"keyup":return Fn.indexOf(y.keyCode)!==-1;case"keydown":return y.keyCode!==229;case"keypress":case"mousedown":case"focusout":return!0;default:return!1}}function lr(h){return h=h.detail,typeof h=="object"&&"data"in h?h.data:null}var Or=!1;function La(h,y){switch(h){case"compositionend":return lr(y);case"keypress":return y.which!==32?null:(Mn=!0,ct);case"textInput":return h=y.data,h===ct&&Mn?null:h;default:return null}}function un(h,y){if(Or)return h==="compositionend"||!kn&&xr(h,y)?(h=Im(),vc=ha=wo=null,Or=!1,h):null;switch(h){case"paste":return null;case"keypress":if(!(y.ctrlKey||y.altKey||y.metaKey)||y.ctrlKey&&y.altKey){if(y.char&&1<y.char.length)return y.char;if(y.which)return String.fromCharCode(y.which)}return null;case"compositionend":return Xt&&y.locale!=="ko"?null:y.data;default:return null}}var Rn={color:!0,date:!0,datetime:!0,"datetime-local":!0,email:!0,month:!0,number:!0,password:!0,range:!0,search:!0,tel:!0,text:!0,time:!0,url:!0,week:!0};function Na(h){var y=h&&h.nodeName&&h.nodeName.toLowerCase();return y==="input"?!!Rn[h.type]:y==="textarea"}function ni(h,y,_,j){td?vl?vl.push(j):vl=[j]:td=j,y=O_(y,"onChange"),0<y.length&&(_=new Vo("onChange","change",null,_,j),h.push({event:_,listeners:y}))}var di=null,Qs=null;function Cl(h){m8(h,0)}function ba(h){var y=We(h);if(xn(y))return h}function Ui(h,y){if(h==="change")return y}var Pl=!1;if($o){var Bi;if($o){var Js="oninput"in document;if(!Js){var _c=document.createElement("div");_c.setAttribute("oninput","return;"),Js=typeof _c.oninput=="function"}Bi=Js}else Bi=!1;Pl=Bi&&(!document.documentMode||9<document.documentMode)}function pa(){di&&(di.detachEvent("onpropertychange",So),Qs=di=null)}function So(h){if(h.propertyName==="value"&&ba(Qs)){var y=[];ni(y,Qs,h,vo(h)),$p(Cl,y)}}function Yy(h,y,_){h==="focusin"?(pa(),di=y,Qs=_,di.attachEvent("onpropertychange",So)):h==="focusout"&&pa()}function ri(h){if(h==="selectionchange"||h==="keyup"||h==="keydown")return ba(Qs)}function lu(h,y){if(h==="click")return ba(y)}function Xp(h,y){if(h==="input"||h==="change")return ba(y)}function Un(h,y){return h===y&&(h!==0||1/h===1/y)||h!==h&&y!==y}var _o=typeof Object.is=="function"?Object.is:Un;function Vm(h,y){if(_o(h,y))return!0;if(typeof h!="object"||h===null||typeof y!="object"||y===null)return!1;var _=Object.keys(h),j=Object.keys(y);if(_.length!==j.length)return!1;for(j=0;j<_.length;j++){var V=_[j];if(!le.call(y,V)||!_o(h[V],y[V]))return!1}return!0}function Yp(h){for(;h&&h.firstChild;)h=h.firstChild;return h}function Qy(h,y){var _=Yp(h);h=0;for(var j;_;){if(_.nodeType===3){if(j=h+_.textContent.length,h<=y&&j>=y)return{node:_,offset:y-h};h=j}e:{for(;_;){if(_.nextSibling){_=_.nextSibling;break e}_=_.parentNode}_=void 0}_=Yp(_)}}function Jy(h,y){return h&&y?h===y?!0:h&&h.nodeType===3?!1:y&&y.nodeType===3?Jy(h,y.parentNode):"contains"in h?h.contains(y):h.compareDocumentPosition?!!(h.compareDocumentPosition(y)&16):!1:!1}function YS(h){h=h!=null&&h.ownerDocument!=null&&h.ownerDocument.defaultView!=null?h.ownerDocument.defaultView:window;for(var y=br(h.document);y instanceof h.HTMLIFrameElement;){try{var _=typeof y.contentWindow.location.href=="string"}catch{_=!1}if(_)h=y.contentWindow;else break;y=br(h.document)}return y}function DA(h){var y=h&&h.nodeName&&h.nodeName.toLowerCase();return y&&(y==="input"&&(h.type==="text"||h.type==="search"||h.type==="tel"||h.type==="url"||h.type==="password")||y==="textarea"||h.contentEditable==="true")}var Hce=$o&&"documentMode"in document&&11>=document.documentMode,tb=null,FA=null,Zy=null,RA=!1;function U5(h,y,_){var j=_.window===_?_.document:_.nodeType===9?_:_.ownerDocument;RA||tb==null||tb!==br(j)||(j=tb,"selectionStart"in j&&DA(j)?j={start:j.selectionStart,end:j.selectionEnd}:(j=(j.ownerDocument&&j.ownerDocument.defaultView||window).getSelection(),j={anchorNode:j.anchorNode,anchorOffset:j.anchorOffset,focusNode:j.focusNode,focusOffset:j.focusOffset}),Zy&&Vm(Zy,j)||(Zy=j,j=O_(FA,"onSelect"),0<j.length&&(y=new Vo("onSelect","select",null,y,_),h.push({event:y,listeners:j}),y.target=tb)))}function Qp(h,y){var _={};return _[h.toLowerCase()]=y.toLowerCase(),_["Webkit"+h]="webkit"+y,_["Moz"+h]="moz"+y,_}var nb={animationend:Qp("Animation","AnimationEnd"),animationiteration:Qp("Animation","AnimationIteration"),animationstart:Qp("Animation","AnimationStart"),transitionrun:Qp("Transition","TransitionRun"),transitionstart:Qp("Transition","TransitionStart"),transitioncancel:Qp("Transition","TransitionCancel"),transitionend:Qp("Transition","TransitionEnd")},LA={},B5={};$o&&(B5=document.createElement("div").style,"AnimationEvent"in window||(delete nb.animationend.animation,delete nb.animationiteration.animation,delete nb.animationstart.animation),"TransitionEvent"in window||delete nb.transitionend.transition);function Jp(h){if(LA[h])return LA[h];if(!nb[h])return h;var y=nb[h],_;for(_ in y)if(y.hasOwnProperty(_)&&_ in B5)return LA[h]=y[_];return h}var H5=Jp("animationend"),q5=Jp("animationiteration"),$5=Jp("animationstart"),qce=Jp("transitionrun"),$ce=Jp("transitionstart"),Vce=Jp("transitioncancel"),V5=Jp("transitionend"),G5=new Map,IA="abort auxClick beforeToggle cancel canPlay canPlayThrough click close contextMenu copy cut drag dragEnd dragEnter dragExit dragLeave dragOver dragStart drop durationChange emptied encrypted ended error gotPointerCapture input invalid keyDown keyPress keyUp load loadedData loadedMetadata loadStart lostPointerCapture mouseDown mouseMove mouseOut mouseOver mouseUp paste pause play playing pointerCancel pointerDown pointerMove pointerOut pointerOver pointerUp progress rateChange reset resize seeked seeking stalled submit suspend timeUpdate touchCancel touchEnd touchStart volumeChange scroll toggle touchMove waiting wheel".split(" ");IA.push("scrollEnd");function kc(h,y){G5.set(h,y),rt(y,[h])}var QS=typeof reportError=="function"?reportError:function(h){if(typeof window=="object"&&typeof window.ErrorEvent=="function"){var y=new window.ErrorEvent("error",{bubbles:!0,cancelable:!0,message:typeof h=="object"&&h!==null&&typeof h.message=="string"?String(h.message):String(h),error:h});if(!window.dispatchEvent(y))return}else if(typeof process=="object"&&typeof process.emit=="function"){process.emit("uncaughtException",h);return}console.error(h)},Tl=[],rb=0,OA=0;function JS(){for(var h=rb,y=OA=rb=0;y<h;){var _=Tl[y];Tl[y++]=null;var j=Tl[y];Tl[y++]=null;var V=Tl[y];Tl[y++]=null;var Z=Tl[y];if(Tl[y++]=null,j!==null&&V!==null){var Ne=j.pending;Ne===null?V.next=V:(V.next=Ne.next,Ne.next=V),j.pending=V}Z!==0&&W5(_,V,Z)}}function ZS(h,y,_,j){Tl[rb++]=h,Tl[rb++]=y,Tl[rb++]=_,Tl[rb++]=j,OA|=j,h.lanes|=j,h=h.alternate,h!==null&&(h.lanes|=j)}function zA(h,y,_,j){return ZS(h,y,_,j),e_(h)}function Zp(h,y){return ZS(h,null,null,y),e_(h)}function W5(h,y,_){h.lanes|=_;var j=h.alternate;j!==null&&(j.lanes|=_);for(var V=!1,Z=h.return;Z!==null;)Z.childLanes|=_,j=Z.alternate,j!==null&&(j.childLanes|=_),Z.tag===22&&(h=Z.stateNode,h===null||h._visibility&1||(V=!0)),h=Z,Z=Z.return;return h.tag===3?(Z=h.stateNode,V&&y!==null&&(V=31-Oe(_),h=Z.hiddenUpdates,j=h[V],j===null?h[V]=[y]:j.push(y),y.lane=_|536870912),Z):null}function e_(h){if(50<wv)throw wv=0,Kj=null,Error(r(185));for(var y=h.return;y!==null;)h=y,y=h.return;return h.tag===3?h.stateNode:null}var ab={};function Gce(h,y,_,j){this.tag=h,this.key=_,this.sibling=this.child=this.return=this.stateNode=this.type=this.elementType=null,this.index=0,this.refCleanup=this.ref=null,this.pendingProps=y,this.dependencies=this.memoizedState=this.updateQueue=this.memoizedProps=null,this.mode=j,this.subtreeFlags=this.flags=0,this.deletions=null,this.childLanes=this.lanes=0,this.alternate=null}function Ko(h,y,_,j){return new Gce(h,y,_,j)}function UA(h){return h=h.prototype,!(!h||!h.isReactComponent)}function cu(h,y){var _=h.alternate;return _===null?(_=Ko(h.tag,y,h.key,h.mode),_.elementType=h.elementType,_.type=h.type,_.stateNode=h.stateNode,_.alternate=h,h.alternate=_):(_.pendingProps=y,_.type=h.type,_.flags=0,_.subtreeFlags=0,_.deletions=null),_.flags=h.flags&65011712,_.childLanes=h.childLanes,_.lanes=h.lanes,_.child=h.child,_.memoizedProps=h.memoizedProps,_.memoizedState=h.memoizedState,_.updateQueue=h.updateQueue,y=h.dependencies,_.dependencies=y===null?null:{lanes:y.lanes,firstContext:y.firstContext},_.sibling=h.sibling,_.index=h.index,_.ref=h.ref,_.refCleanup=h.refCleanup,_}function K5(h,y){h.flags&=65011714;var _=h.alternate;return _===null?(h.childLanes=0,h.lanes=y,h.child=null,h.subtreeFlags=0,h.memoizedProps=null,h.memoizedState=null,h.updateQueue=null,h.dependencies=null,h.stateNode=null):(h.childLanes=_.childLanes,h.lanes=_.lanes,h.child=_.child,h.subtreeFlags=0,h.deletions=null,h.memoizedProps=_.memoizedProps,h.memoizedState=_.memoizedState,h.updateQueue=_.updateQueue,h.type=_.type,y=_.dependencies,h.dependencies=y===null?null:{lanes:y.lanes,firstContext:y.firstContext}),h}function t_(h,y,_,j,V,Z){var Ne=0;if(j=h,typeof h=="function")UA(h)&&(Ne=1);else if(typeof h=="string")Ne=Qde(h,_,be.current)?26:h==="html"||h==="head"||h==="body"?27:5;else e:switch(h){case k:return h=Ko(31,_,y,V),h.elementType=k,h.lanes=Z,h;case v:return ef(_.children,V,Z,y);case b:Ne=8,V|=24;break;case g:return h=Ko(12,_,y,V|2),h.elementType=g,h.lanes=Z,h;case C:return h=Ko(13,_,y,V),h.elementType=C,h.lanes=Z,h;case A:return h=Ko(19,_,y,V),h.elementType=A,h.lanes=Z,h;default:if(typeof h=="object"&&h!==null)switch(h.$$typeof){case N:Ne=10;break e;case S:Ne=9;break e;case P:Ne=11;break e;case T:Ne=14;break e;case F:Ne=16,j=null;break e}Ne=29,_=Error(r(130,h===null?"null":typeof h,"")),j=null}return y=Ko(Ne,_,y,V),y.elementType=h,y.type=j,y.lanes=Z,y}function ef(h,y,_,j){return h=Ko(7,h,j,y),h.lanes=_,h}function BA(h,y,_){return h=Ko(6,h,null,y),h.lanes=_,h}function X5(h){var y=Ko(18,null,null,0);return y.stateNode=h,y}function HA(h,y,_){return y=Ko(4,h.children!==null?h.children:[],h.key,y),y.lanes=_,y.stateNode={containerInfo:h.containerInfo,pendingChildren:null,implementation:h.implementation},y}var Y5=new WeakMap;function Al(h,y){if(typeof h=="object"&&h!==null){var _=Y5.get(h);return _!==void 0?_:(y={value:h,source:y,stack:te(y)},Y5.set(h,y),y)}return{value:h,source:y,stack:te(y)}}var ib=[],sb=0,n_=null,ev=0,jl=[],Ml=0,Gm=null,ld=1,cd="";function du(h,y){ib[sb++]=ev,ib[sb++]=n_,n_=h,ev=y}function Q5(h,y,_){jl[Ml++]=ld,jl[Ml++]=cd,jl[Ml++]=Gm,Gm=h;var j=ld;h=cd;var V=32-Oe(j)-1;j&=~(1<<V),_+=1;var Z=32-Oe(y)+V;if(30<Z){var Ne=V-V%5;Z=(j&(1<<Ne)-1).toString(32),j>>=Ne,V-=Ne,ld=1<<32-Oe(y)+V|_<<V|j,cd=Z+h}else ld=1<<Z|_<<V|j,cd=h}function qA(h){h.return!==null&&(du(h,1),Q5(h,1,0))}function $A(h){for(;h===n_;)n_=ib[--sb],ib[sb]=null,ev=ib[--sb],ib[sb]=null;for(;h===Gm;)Gm=jl[--Ml],jl[Ml]=null,cd=jl[--Ml],jl[Ml]=null,ld=jl[--Ml],jl[Ml]=null}function J5(h,y){jl[Ml++]=ld,jl[Ml++]=cd,jl[Ml++]=Gm,ld=y.id,cd=y.overflow,Gm=h}var cs=null,xa=null,Sr=!1,Wm=null,El=!1,VA=Error(r(519));function Km(h){var y=Error(r(418,1<arguments.length&&arguments[1]!==void 0&&arguments[1]?"text":"HTML",""));throw tv(Al(y,h)),VA}function Z5(h){var y=h.stateNode,_=h.type,j=h.memoizedProps;switch(y[jt]=h,y[Jt]=j,_){case"dialog":pr("cancel",y),pr("close",y);break;case"iframe":case"object":case"embed":pr("load",y);break;case"video":case"audio":for(_=0;_<_v.length;_++)pr(_v[_],y);break;case"source":pr("error",y);break;case"img":case"image":case"link":pr("error",y),pr("load",y);break;case"details":pr("toggle",y);break;case"input":pr("invalid",y),$n(y,j.value,j.defaultValue,j.checked,j.defaultChecked,j.type,j.name,!0);break;case"select":pr("invalid",y);break;case"textarea":pr("invalid",y),Hr(y,j.value,j.defaultValue,j.children)}_=j.children,typeof _!="string"&&typeof _!="number"&&typeof _!="bigint"||y.textContent===""+_||j.suppressHydrationWarning===!0||g8(y.textContent,_)?(j.popover!=null&&(pr("beforetoggle",y),pr("toggle",y)),j.onScroll!=null&&pr("scroll",y),j.onScrollEnd!=null&&pr("scrollend",y),j.onClick!=null&&(y.onclick=Wt),y=!0):y=!1,y||Km(h,!0)}function eU(h){for(cs=h.return;cs;)switch(cs.tag){case 5:case 31:case 13:El=!1;return;case 27:case 3:El=!0;return;default:cs=cs.return}}function ob(h){if(h!==cs)return!1;if(!Sr)return eU(h),Sr=!0,!1;var y=h.tag,_;if((_=y!==3&&y!==27)&&((_=y===5)&&(_=h.type,_=!(_!=="form"&&_!=="button")||cM(h.type,h.memoizedProps)),_=!_),_&&xa&&Km(h),eU(h),y===13){if(h=h.memoizedState,h=h!==null?h.dehydrated:null,!h)throw Error(r(317));xa=N8(h)}else if(y===31){if(h=h.memoizedState,h=h!==null?h.dehydrated:null,!h)throw Error(r(317));xa=N8(h)}else y===27?(y=xa,lh(h.type)?(h=pM,pM=null,xa=h):xa=y):xa=cs?Fl(h.stateNode.nextSibling):null;return!0}function tf(){xa=cs=null,Sr=!1}function GA(){var h=Wm;return h!==null&&(Po===null?Po=h:Po.push.apply(Po,h),Wm=null),h}function tv(h){Wm===null?Wm=[h]:Wm.push(h)}var WA=K(null),nf=null,uu=null;function Xm(h,y,_){pe(WA,y._currentValue),y._currentValue=_}function mu(h){h._currentValue=WA.current,ae(WA)}function KA(h,y,_){for(;h!==null;){var j=h.alternate;if((h.childLanes&y)!==y?(h.childLanes|=y,j!==null&&(j.childLanes|=y)):j!==null&&(j.childLanes&y)!==y&&(j.childLanes|=y),h===_)break;h=h.return}}function XA(h,y,_,j){var V=h.child;for(V!==null&&(V.return=h);V!==null;){var Z=V.dependencies;if(Z!==null){var Ne=V.child;Z=Z.firstContext;e:for(;Z!==null;){var qe=Z;Z=V;for(var lt=0;lt<y.length;lt++)if(qe.context===y[lt]){Z.lanes|=_,qe=Z.alternate,qe!==null&&(qe.lanes|=_),KA(Z.return,_,h),j||(Ne=null);break e}Z=qe.next}}else if(V.tag===18){if(Ne=V.return,Ne===null)throw Error(r(341));Ne.lanes|=_,Z=Ne.alternate,Z!==null&&(Z.lanes|=_),KA(Ne,_,h),Ne=null}else Ne=V.child;if(Ne!==null)Ne.return=V;else for(Ne=V;Ne!==null;){if(Ne===h){Ne=null;break}if(V=Ne.sibling,V!==null){V.return=Ne.return,Ne=V;break}Ne=Ne.return}V=Ne}}function lb(h,y,_,j){h=null;for(var V=y,Z=!1;V!==null;){if(!Z){if((V.flags&524288)!==0)Z=!0;else if((V.flags&262144)!==0)break}if(V.tag===10){var Ne=V.alternate;if(Ne===null)throw Error(r(387));if(Ne=Ne.memoizedProps,Ne!==null){var qe=V.type;_o(V.pendingProps.value,Ne.value)||(h!==null?h.push(qe):h=[qe])}}else if(V===Y.current){if(Ne=V.alternate,Ne===null)throw Error(r(387));Ne.memoizedState.memoizedState!==V.memoizedState.memoizedState&&(h!==null?h.push(Tv):h=[Tv])}V=V.return}h!==null&&XA(y,h,_,j),y.flags|=262144}function r_(h){for(h=h.firstContext;h!==null;){if(!_o(h.context._currentValue,h.memoizedValue))return!0;h=h.next}return!1}function rf(h){nf=h,uu=null,h=h.dependencies,h!==null&&(h.firstContext=null)}function ds(h){return tU(nf,h)}function a_(h,y){return nf===null&&rf(h),tU(h,y)}function tU(h,y){var _=y._currentValue;if(y={context:y,memoizedValue:_,next:null},uu===null){if(h===null)throw Error(r(308));uu=y,h.dependencies={lanes:0,firstContext:y},h.flags|=524288}else uu=uu.next=y;return _}var Wce=typeof AbortController<"u"?AbortController:function(){var h=[],y=this.signal={aborted:!1,addEventListener:function(_,j){h.push(j)}};this.abort=function(){y.aborted=!0,h.forEach(function(_){return _()})}},Kce=t.unstable_scheduleCallback,Xce=t.unstable_NormalPriority,ui={$$typeof:N,Consumer:null,Provider:null,_currentValue:null,_currentValue2:null,_threadCount:0};function YA(){return{controller:new Wce,data:new Map,refCount:0}}function nv(h){h.refCount--,h.refCount===0&&Kce(Xce,function(){h.controller.abort()})}var rv=null,QA=0,cb=0,db=null;function Yce(h,y){if(rv===null){var _=rv=[];QA=0,cb=eM(),db={status:"pending",value:void 0,then:function(j){_.push(j)}}}return QA++,y.then(nU,nU),y}function nU(){if(--QA===0&&rv!==null){db!==null&&(db.status="fulfilled");var h=rv;rv=null,cb=0,db=null;for(var y=0;y<h.length;y++)(0,h[y])()}}function Qce(h,y){var _=[],j={status:"pending",value:null,reason:null,then:function(V){_.push(V)}};return h.then(function(){j.status="fulfilled",j.value=y;for(var V=0;V<_.length;V++)(0,_[V])(y)},function(V){for(j.status="rejected",j.reason=V,V=0;V<_.length;V++)(0,_[V])(void 0)}),j}var rU=re.S;re.S=function(h,y){UB=L(),typeof y=="object"&&y!==null&&typeof y.then=="function"&&Yce(h,y),rU!==null&&rU(h,y)};var af=K(null);function JA(){var h=af.current;return h!==null?h:oa.pooledCache}function i_(h,y){y===null?pe(af,af.current):pe(af,y.pool)}function aU(){var h=JA();return h===null?null:{parent:ui._currentValue,pool:h}}var ub=Error(r(460)),ZA=Error(r(474)),s_=Error(r(542)),o_={then:function(){}};function iU(h){return h=h.status,h==="fulfilled"||h==="rejected"}function sU(h,y,_){switch(_=h[_],_===void 0?h.push(y):_!==y&&(y.then(Wt,Wt),y=_),y.status){case"fulfilled":return y.value;case"rejected":throw h=y.reason,lU(h),h;default:if(typeof y.status=="string")y.then(Wt,Wt);else{if(h=oa,h!==null&&100<h.shellSuspendCounter)throw Error(r(482));h=y,h.status="pending",h.then(function(j){if(y.status==="pending"){var V=y;V.status="fulfilled",V.value=j}},function(j){if(y.status==="pending"){var V=y;V.status="rejected",V.reason=j}})}switch(y.status){case"fulfilled":return y.value;case"rejected":throw h=y.reason,lU(h),h}throw of=y,ub}}function sf(h){try{var y=h._init;return y(h._payload)}catch(_){throw _!==null&&typeof _=="object"&&typeof _.then=="function"?(of=_,ub):_}}var of=null;function oU(){if(of===null)throw Error(r(459));var h=of;return of=null,h}function lU(h){if(h===ub||h===s_)throw Error(r(483))}var mb=null,av=0;function l_(h){var y=av;return av+=1,mb===null&&(mb=[]),sU(mb,h,y)}function iv(h,y){y=y.props.ref,h.ref=y!==void 0?y:null}function c_(h,y){throw y.$$typeof===p?Error(r(525)):(h=Object.prototype.toString.call(y),Error(r(31,h==="[object Object]"?"object with keys {"+Object.keys(y).join(", ")+"}":h)))}function cU(h){function y(gt,pt){if(h){var yt=gt.deletions;yt===null?(gt.deletions=[pt],gt.flags|=16):yt.push(pt)}}function _(gt,pt){if(!h)return null;for(;pt!==null;)y(gt,pt),pt=pt.sibling;return null}function j(gt){for(var pt=new Map;gt!==null;)gt.key!==null?pt.set(gt.key,gt):pt.set(gt.index,gt),gt=gt.sibling;return pt}function V(gt,pt){return gt=cu(gt,pt),gt.index=0,gt.sibling=null,gt}function Z(gt,pt,yt){return gt.index=yt,h?(yt=gt.alternate,yt!==null?(yt=yt.index,yt<pt?(gt.flags|=67108866,pt):yt):(gt.flags|=67108866,pt)):(gt.flags|=1048576,pt)}function Ne(gt){return h&&gt.alternate===null&&(gt.flags|=67108866),gt}function qe(gt,pt,yt,It){return pt===null||pt.tag!==6?(pt=BA(yt,gt.mode,It),pt.return=gt,pt):(pt=V(pt,yt),pt.return=gt,pt)}function lt(gt,pt,yt,It){var An=yt.type;return An===v?Rt(gt,pt,yt.props.children,It,yt.key):pt!==null&&(pt.elementType===An||typeof An=="object"&&An!==null&&An.$$typeof===F&&sf(An)===pt.type)?(pt=V(pt,yt.props),iv(pt,yt),pt.return=gt,pt):(pt=t_(yt.type,yt.key,yt.props,null,gt.mode,It),iv(pt,yt),pt.return=gt,pt)}function vt(gt,pt,yt,It){return pt===null||pt.tag!==4||pt.stateNode.containerInfo!==yt.containerInfo||pt.stateNode.implementation!==yt.implementation?(pt=HA(yt,gt.mode,It),pt.return=gt,pt):(pt=V(pt,yt.children||[]),pt.return=gt,pt)}function Rt(gt,pt,yt,It,An){return pt===null||pt.tag!==7?(pt=ef(yt,gt.mode,It,An),pt.return=gt,pt):(pt=V(pt,yt),pt.return=gt,pt)}function Ut(gt,pt,yt){if(typeof pt=="string"&&pt!==""||typeof pt=="number"||typeof pt=="bigint")return pt=BA(""+pt,gt.mode,yt),pt.return=gt,pt;if(typeof pt=="object"&&pt!==null){switch(pt.$$typeof){case f:return yt=t_(pt.type,pt.key,pt.props,null,gt.mode,yt),iv(yt,pt),yt.return=gt,yt;case x:return pt=HA(pt,gt.mode,yt),pt.return=gt,pt;case F:return pt=sf(pt),Ut(gt,pt,yt)}if(ne(pt)||z(pt))return pt=ef(pt,gt.mode,yt,null),pt.return=gt,pt;if(typeof pt.then=="function")return Ut(gt,l_(pt),yt);if(pt.$$typeof===N)return Ut(gt,a_(gt,pt),yt);c_(gt,pt)}return null}function kt(gt,pt,yt,It){var An=pt!==null?pt.key:null;if(typeof yt=="string"&&yt!==""||typeof yt=="number"||typeof yt=="bigint")return An!==null?null:qe(gt,pt,""+yt,It);if(typeof yt=="object"&&yt!==null){switch(yt.$$typeof){case f:return yt.key===An?lt(gt,pt,yt,It):null;case x:return yt.key===An?vt(gt,pt,yt,It):null;case F:return yt=sf(yt),kt(gt,pt,yt,It)}if(ne(yt)||z(yt))return An!==null?null:Rt(gt,pt,yt,It,null);if(typeof yt.then=="function")return kt(gt,pt,l_(yt),It);if(yt.$$typeof===N)return kt(gt,pt,a_(gt,yt),It);c_(gt,yt)}return null}function At(gt,pt,yt,It,An){if(typeof It=="string"&&It!==""||typeof It=="number"||typeof It=="bigint")return gt=gt.get(yt)||null,qe(pt,gt,""+It,An);if(typeof It=="object"&&It!==null){switch(It.$$typeof){case f:return gt=gt.get(It.key===null?yt:It.key)||null,lt(pt,gt,It,An);case x:return gt=gt.get(It.key===null?yt:It.key)||null,vt(pt,gt,It,An);case F:return It=sf(It),At(gt,pt,yt,It,An)}if(ne(It)||z(It))return gt=gt.get(yt)||null,Rt(pt,gt,It,An,null);if(typeof It.then=="function")return At(gt,pt,yt,l_(It),An);if(It.$$typeof===N)return At(gt,pt,yt,a_(pt,It),An);c_(pt,It)}return null}function bn(gt,pt,yt,It){for(var An=null,Er=null,vn=pt,Qn=pt=0,vr=null;vn!==null&&Qn<yt.length;Qn++){vn.index>Qn?(vr=vn,vn=null):vr=vn.sibling;var Dr=kt(gt,vn,yt[Qn],It);if(Dr===null){vn===null&&(vn=vr);break}h&&vn&&Dr.alternate===null&&y(gt,vn),pt=Z(Dr,pt,Qn),Er===null?An=Dr:Er.sibling=Dr,Er=Dr,vn=vr}if(Qn===yt.length)return _(gt,vn),Sr&&du(gt,Qn),An;if(vn===null){for(;Qn<yt.length;Qn++)vn=Ut(gt,yt[Qn],It),vn!==null&&(pt=Z(vn,pt,Qn),Er===null?An=vn:Er.sibling=vn,Er=vn);return Sr&&du(gt,Qn),An}for(vn=j(vn);Qn<yt.length;Qn++)vr=At(vn,gt,Qn,yt[Qn],It),vr!==null&&(h&&vr.alternate!==null&&vn.delete(vr.key===null?Qn:vr.key),pt=Z(vr,pt,Qn),Er===null?An=vr:Er.sibling=vr,Er=vr);return h&&vn.forEach(function(hh){return y(gt,hh)}),Sr&&du(gt,Qn),An}function In(gt,pt,yt,It){if(yt==null)throw Error(r(151));for(var An=null,Er=null,vn=pt,Qn=pt=0,vr=null,Dr=yt.next();vn!==null&&!Dr.done;Qn++,Dr=yt.next()){vn.index>Qn?(vr=vn,vn=null):vr=vn.sibling;var hh=kt(gt,vn,Dr.value,It);if(hh===null){vn===null&&(vn=vr);break}h&&vn&&hh.alternate===null&&y(gt,vn),pt=Z(hh,pt,Qn),Er===null?An=hh:Er.sibling=hh,Er=hh,vn=vr}if(Dr.done)return _(gt,vn),Sr&&du(gt,Qn),An;if(vn===null){for(;!Dr.done;Qn++,Dr=yt.next())Dr=Ut(gt,Dr.value,It),Dr!==null&&(pt=Z(Dr,pt,Qn),Er===null?An=Dr:Er.sibling=Dr,Er=Dr);return Sr&&du(gt,Qn),An}for(vn=j(vn);!Dr.done;Qn++,Dr=yt.next())Dr=At(vn,gt,Qn,Dr.value,It),Dr!==null&&(h&&Dr.alternate!==null&&vn.delete(Dr.key===null?Qn:Dr.key),pt=Z(Dr,pt,Qn),Er===null?An=Dr:Er.sibling=Dr,Er=Dr);return h&&vn.forEach(function(lue){return y(gt,lue)}),Sr&&du(gt,Qn),An}function Qr(gt,pt,yt,It){if(typeof yt=="object"&&yt!==null&&yt.type===v&&yt.key===null&&(yt=yt.props.children),typeof yt=="object"&&yt!==null){switch(yt.$$typeof){case f:e:{for(var An=yt.key;pt!==null;){if(pt.key===An){if(An=yt.type,An===v){if(pt.tag===7){_(gt,pt.sibling),It=V(pt,yt.props.children),It.return=gt,gt=It;break e}}else if(pt.elementType===An||typeof An=="object"&&An!==null&&An.$$typeof===F&&sf(An)===pt.type){_(gt,pt.sibling),It=V(pt,yt.props),iv(It,yt),It.return=gt,gt=It;break e}_(gt,pt);break}else y(gt,pt);pt=pt.sibling}yt.type===v?(It=ef(yt.props.children,gt.mode,It,yt.key),It.return=gt,gt=It):(It=t_(yt.type,yt.key,yt.props,null,gt.mode,It),iv(It,yt),It.return=gt,gt=It)}return Ne(gt);case x:e:{for(An=yt.key;pt!==null;){if(pt.key===An)if(pt.tag===4&&pt.stateNode.containerInfo===yt.containerInfo&&pt.stateNode.implementation===yt.implementation){_(gt,pt.sibling),It=V(pt,yt.children||[]),It.return=gt,gt=It;break e}else{_(gt,pt);break}else y(gt,pt);pt=pt.sibling}It=HA(yt,gt.mode,It),It.return=gt,gt=It}return Ne(gt);case F:return yt=sf(yt),Qr(gt,pt,yt,It)}if(ne(yt))return bn(gt,pt,yt,It);if(z(yt)){if(An=z(yt),typeof An!="function")throw Error(r(150));return yt=An.call(yt),In(gt,pt,yt,It)}if(typeof yt.then=="function")return Qr(gt,pt,l_(yt),It);if(yt.$$typeof===N)return Qr(gt,pt,a_(gt,yt),It);c_(gt,yt)}return typeof yt=="string"&&yt!==""||typeof yt=="number"||typeof yt=="bigint"?(yt=""+yt,pt!==null&&pt.tag===6?(_(gt,pt.sibling),It=V(pt,yt),It.return=gt,gt=It):(_(gt,pt),It=BA(yt,gt.mode,It),It.return=gt,gt=It),Ne(gt)):_(gt,pt)}return function(gt,pt,yt,It){try{av=0;var An=Qr(gt,pt,yt,It);return mb=null,An}catch(vn){if(vn===ub||vn===s_)throw vn;var Er=Ko(29,vn,null,gt.mode);return Er.lanes=It,Er.return=gt,Er}}}var lf=cU(!0),dU=cU(!1),Ym=!1;function ej(h){h.updateQueue={baseState:h.memoizedState,firstBaseUpdate:null,lastBaseUpdate:null,shared:{pending:null,lanes:0,hiddenCallbacks:null},callbacks:null}}function tj(h,y){h=h.updateQueue,y.updateQueue===h&&(y.updateQueue={baseState:h.baseState,firstBaseUpdate:h.firstBaseUpdate,lastBaseUpdate:h.lastBaseUpdate,shared:h.shared,callbacks:null})}function Qm(h){return{lane:h,tag:0,payload:null,callback:null,next:null}}function Jm(h,y,_){var j=h.updateQueue;if(j===null)return null;if(j=j.shared,(Ir&2)!==0){var V=j.pending;return V===null?y.next=y:(y.next=V.next,V.next=y),j.pending=y,y=e_(h),W5(h,null,_),y}return ZS(h,j,y,_),e_(h)}function sv(h,y,_){if(y=y.updateQueue,y!==null&&(y=y.shared,(_&4194048)!==0)){var j=y.lanes;j&=h.pendingLanes,_|=j,y.lanes=_,qt(h,_)}}function nj(h,y){var _=h.updateQueue,j=h.alternate;if(j!==null&&(j=j.updateQueue,_===j)){var V=null,Z=null;if(_=_.firstBaseUpdate,_!==null){do{var Ne={lane:_.lane,tag:_.tag,payload:_.payload,callback:null,next:null};Z===null?V=Z=Ne:Z=Z.next=Ne,_=_.next}while(_!==null);Z===null?V=Z=y:Z=Z.next=y}else V=Z=y;_={baseState:j.baseState,firstBaseUpdate:V,lastBaseUpdate:Z,shared:j.shared,callbacks:j.callbacks},h.updateQueue=_;return}h=_.lastBaseUpdate,h===null?_.firstBaseUpdate=y:h.next=y,_.lastBaseUpdate=y}var rj=!1;function ov(){if(rj){var h=db;if(h!==null)throw h}}function lv(h,y,_,j){rj=!1;var V=h.updateQueue;Ym=!1;var Z=V.firstBaseUpdate,Ne=V.lastBaseUpdate,qe=V.shared.pending;if(qe!==null){V.shared.pending=null;var lt=qe,vt=lt.next;lt.next=null,Ne===null?Z=vt:Ne.next=vt,Ne=lt;var Rt=h.alternate;Rt!==null&&(Rt=Rt.updateQueue,qe=Rt.lastBaseUpdate,qe!==Ne&&(qe===null?Rt.firstBaseUpdate=vt:qe.next=vt,Rt.lastBaseUpdate=lt))}if(Z!==null){var Ut=V.baseState;Ne=0,Rt=vt=lt=null,qe=Z;do{var kt=qe.lane&-536870913,At=kt!==qe.lane;if(At?(yr&kt)===kt:(j&kt)===kt){kt!==0&&kt===cb&&(rj=!0),Rt!==null&&(Rt=Rt.next={lane:0,tag:qe.tag,payload:qe.payload,callback:null,next:null});e:{var bn=h,In=qe;kt=y;var Qr=_;switch(In.tag){case 1:if(bn=In.payload,typeof bn=="function"){Ut=bn.call(Qr,Ut,kt);break e}Ut=bn;break e;case 3:bn.flags=bn.flags&-65537|128;case 0:if(bn=In.payload,kt=typeof bn=="function"?bn.call(Qr,Ut,kt):bn,kt==null)break e;Ut=m({},Ut,kt);break e;case 2:Ym=!0}}kt=qe.callback,kt!==null&&(h.flags|=64,At&&(h.flags|=8192),At=V.callbacks,At===null?V.callbacks=[kt]:At.push(kt))}else At={lane:kt,tag:qe.tag,payload:qe.payload,callback:qe.callback,next:null},Rt===null?(vt=Rt=At,lt=Ut):Rt=Rt.next=At,Ne|=kt;if(qe=qe.next,qe===null){if(qe=V.shared.pending,qe===null)break;At=qe,qe=At.next,At.next=null,V.lastBaseUpdate=At,V.shared.pending=null}}while(!0);Rt===null&&(lt=Ut),V.baseState=lt,V.firstBaseUpdate=vt,V.lastBaseUpdate=Rt,Z===null&&(V.shared.lanes=0),rh|=Ne,h.lanes=Ne,h.memoizedState=Ut}}function uU(h,y){if(typeof h!="function")throw Error(r(191,h));h.call(y)}function mU(h,y){var _=h.callbacks;if(_!==null)for(h.callbacks=null,h=0;h<_.length;h++)uU(_[h],y)}var hb=K(null),d_=K(0);function hU(h,y){h=wu,pe(d_,h),pe(hb,y),wu=h|y.baseLanes}function aj(){pe(d_,wu),pe(hb,hb.current)}function ij(){wu=d_.current,ae(hb),ae(d_)}var Xo=K(null),Dl=null;function Zm(h){var y=h.alternate;pe(ai,ai.current&1),pe(Xo,h),Dl===null&&(y===null||hb.current!==null||y.memoizedState!==null)&&(Dl=h)}function sj(h){pe(ai,ai.current),pe(Xo,h),Dl===null&&(Dl=h)}function pU(h){h.tag===22?(pe(ai,ai.current),pe(Xo,h),Dl===null&&(Dl=h)):eh()}function eh(){pe(ai,ai.current),pe(Xo,Xo.current)}function Yo(h){ae(Xo),Dl===h&&(Dl=null),ae(ai)}var ai=K(0);function u_(h){for(var y=h;y!==null;){if(y.tag===13){var _=y.memoizedState;if(_!==null&&(_=_.dehydrated,_===null||mM(_)||hM(_)))return y}else if(y.tag===19&&(y.memoizedProps.revealOrder==="forwards"||y.memoizedProps.revealOrder==="backwards"||y.memoizedProps.revealOrder==="unstable_legacy-backwards"||y.memoizedProps.revealOrder==="together")){if((y.flags&128)!==0)return y}else if(y.child!==null){y.child.return=y,y=y.child;continue}if(y===h)break;for(;y.sibling===null;){if(y.return===null||y.return===h)return null;y=y.return}y.sibling.return=y.return,y=y.sibling}return null}var hu=0,Xn=null,Xr=null,mi=null,m_=!1,pb=!1,cf=!1,h_=0,cv=0,fb=null,Jce=0;function $a(){throw Error(r(321))}function oj(h,y){if(y===null)return!1;for(var _=0;_<y.length&&_<h.length;_++)if(!_o(h[_],y[_]))return!1;return!0}function lj(h,y,_,j,V,Z){return hu=Z,Xn=y,y.memoizedState=null,y.updateQueue=null,y.lanes=0,re.H=h===null||h.memoizedState===null?QU:_j,cf=!1,Z=_(j,V),cf=!1,pb&&(Z=gU(y,_,j,V)),fU(h),Z}function fU(h){re.H=mv;var y=Xr!==null&&Xr.next!==null;if(hu=0,mi=Xr=Xn=null,m_=!1,cv=0,fb=null,y)throw Error(r(300));h===null||hi||(h=h.dependencies,h!==null&&r_(h)&&(hi=!0))}function gU(h,y,_,j){Xn=h;var V=0;do{if(pb&&(fb=null),cv=0,pb=!1,25<=V)throw Error(r(301));if(V+=1,mi=Xr=null,h.updateQueue!=null){var Z=h.updateQueue;Z.lastEffect=null,Z.events=null,Z.stores=null,Z.memoCache!=null&&(Z.memoCache.index=0)}re.H=JU,Z=y(_,j)}while(pb);return Z}function Zce(){var h=re.H,y=h.useState()[0];return y=typeof y.then=="function"?dv(y):y,h=h.useState()[0],(Xr!==null?Xr.memoizedState:null)!==h&&(Xn.flags|=1024),y}function cj(){var h=h_!==0;return h_=0,h}function dj(h,y,_){y.updateQueue=h.updateQueue,y.flags&=-2053,h.lanes&=~_}function uj(h){if(m_){for(h=h.memoizedState;h!==null;){var y=h.queue;y!==null&&(y.pending=null),h=h.next}m_=!1}hu=0,mi=Xr=Xn=null,pb=!1,cv=h_=0,fb=null}function Zs(){var h={memoizedState:null,baseState:null,baseQueue:null,queue:null,next:null};return mi===null?Xn.memoizedState=mi=h:mi=mi.next=h,mi}function ii(){if(Xr===null){var h=Xn.alternate;h=h!==null?h.memoizedState:null}else h=Xr.next;var y=mi===null?Xn.memoizedState:mi.next;if(y!==null)mi=y,Xr=h;else{if(h===null)throw Xn.alternate===null?Error(r(467)):Error(r(310));Xr=h,h={memoizedState:Xr.memoizedState,baseState:Xr.baseState,baseQueue:Xr.baseQueue,queue:Xr.queue,next:null},mi===null?Xn.memoizedState=mi=h:mi=mi.next=h}return mi}function p_(){return{lastEffect:null,events:null,stores:null,memoCache:null}}function dv(h){var y=cv;return cv+=1,fb===null&&(fb=[]),h=sU(fb,h,y),y=Xn,(mi===null?y.memoizedState:mi.next)===null&&(y=y.alternate,re.H=y===null||y.memoizedState===null?QU:_j),h}function f_(h){if(h!==null&&typeof h=="object"){if(typeof h.then=="function")return dv(h);if(h.$$typeof===N)return ds(h)}throw Error(r(438,String(h)))}function mj(h){var y=null,_=Xn.updateQueue;if(_!==null&&(y=_.memoCache),y==null){var j=Xn.alternate;j!==null&&(j=j.updateQueue,j!==null&&(j=j.memoCache,j!=null&&(y={data:j.data.map(function(V){return V.slice()}),index:0})))}if(y==null&&(y={data:[],index:0}),_===null&&(_=p_(),Xn.updateQueue=_),_.memoCache=y,_=y.data[y.index],_===void 0)for(_=y.data[y.index]=Array(h),j=0;j<h;j++)_[j]=E;return y.index++,_}function pu(h,y){return typeof y=="function"?y(h):y}function g_(h){var y=ii();return hj(y,Xr,h)}function hj(h,y,_){var j=h.queue;if(j===null)throw Error(r(311));j.lastRenderedReducer=_;var V=h.baseQueue,Z=j.pending;if(Z!==null){if(V!==null){var Ne=V.next;V.next=Z.next,Z.next=Ne}y.baseQueue=V=Z,j.pending=null}if(Z=h.baseState,V===null)h.memoizedState=Z;else{y=V.next;var qe=Ne=null,lt=null,vt=y,Rt=!1;do{var Ut=vt.lane&-536870913;if(Ut!==vt.lane?(yr&Ut)===Ut:(hu&Ut)===Ut){var kt=vt.revertLane;if(kt===0)lt!==null&&(lt=lt.next={lane:0,revertLane:0,gesture:null,action:vt.action,hasEagerState:vt.hasEagerState,eagerState:vt.eagerState,next:null}),Ut===cb&&(Rt=!0);else if((hu&kt)===kt){vt=vt.next,kt===cb&&(Rt=!0);continue}else Ut={lane:0,revertLane:vt.revertLane,gesture:null,action:vt.action,hasEagerState:vt.hasEagerState,eagerState:vt.eagerState,next:null},lt===null?(qe=lt=Ut,Ne=Z):lt=lt.next=Ut,Xn.lanes|=kt,rh|=kt;Ut=vt.action,cf&&_(Z,Ut),Z=vt.hasEagerState?vt.eagerState:_(Z,Ut)}else kt={lane:Ut,revertLane:vt.revertLane,gesture:vt.gesture,action:vt.action,hasEagerState:vt.hasEagerState,eagerState:vt.eagerState,next:null},lt===null?(qe=lt=kt,Ne=Z):lt=lt.next=kt,Xn.lanes|=Ut,rh|=Ut;vt=vt.next}while(vt!==null&&vt!==y);if(lt===null?Ne=Z:lt.next=qe,!_o(Z,h.memoizedState)&&(hi=!0,Rt&&(_=db,_!==null)))throw _;h.memoizedState=Z,h.baseState=Ne,h.baseQueue=lt,j.lastRenderedState=Z}return V===null&&(j.lanes=0),[h.memoizedState,j.dispatch]}function pj(h){var y=ii(),_=y.queue;if(_===null)throw Error(r(311));_.lastRenderedReducer=h;var j=_.dispatch,V=_.pending,Z=y.memoizedState;if(V!==null){_.pending=null;var Ne=V=V.next;do Z=h(Z,Ne.action),Ne=Ne.next;while(Ne!==V);_o(Z,y.memoizedState)||(hi=!0),y.memoizedState=Z,y.baseQueue===null&&(y.baseState=Z),_.lastRenderedState=Z}return[Z,j]}function bU(h,y,_){var j=Xn,V=ii(),Z=Sr;if(Z){if(_===void 0)throw Error(r(407));_=_()}else _=y();var Ne=!_o((Xr||V).memoizedState,_);if(Ne&&(V.memoizedState=_,hi=!0),V=V.queue,bj(vU.bind(null,j,V,h),[h]),V.getSnapshot!==y||Ne||mi!==null&&mi.memoizedState.tag&1){if(j.flags|=2048,gb(9,{destroy:void 0},yU.bind(null,j,V,_,y),null),oa===null)throw Error(r(349));Z||(hu&127)!==0||xU(j,y,_)}return _}function xU(h,y,_){h.flags|=16384,h={getSnapshot:y,value:_},y=Xn.updateQueue,y===null?(y=p_(),Xn.updateQueue=y,y.stores=[h]):(_=y.stores,_===null?y.stores=[h]:_.push(h))}function yU(h,y,_,j){y.value=_,y.getSnapshot=j,wU(y)&&SU(h)}function vU(h,y,_){return _(function(){wU(y)&&SU(h)})}function wU(h){var y=h.getSnapshot;h=h.value;try{var _=y();return!_o(h,_)}catch{return!0}}function SU(h){var y=Zp(h,2);y!==null&&To(y,h,2)}function fj(h){var y=Zs();if(typeof h=="function"){var _=h;if(h=_(),cf){Me(!0);try{_()}finally{Me(!1)}}}return y.memoizedState=y.baseState=h,y.queue={pending:null,lanes:0,dispatch:null,lastRenderedReducer:pu,lastRenderedState:h},y}function _U(h,y,_,j){return h.baseState=_,hj(h,Xr,typeof j=="function"?j:pu)}function ede(h,y,_,j,V){if(y_(h))throw Error(r(485));if(h=y.action,h!==null){var Z={payload:V,action:h,next:null,isTransition:!0,status:"pending",value:null,reason:null,listeners:[],then:function(Ne){Z.listeners.push(Ne)}};re.T!==null?_(!0):Z.isTransition=!1,j(Z),_=y.pending,_===null?(Z.next=y.pending=Z,kU(y,Z)):(Z.next=_.next,y.pending=_.next=Z)}}function kU(h,y){var _=y.action,j=y.payload,V=h.state;if(y.isTransition){var Z=re.T,Ne={};re.T=Ne;try{var qe=_(V,j),lt=re.S;lt!==null&&lt(Ne,qe),NU(h,y,qe)}catch(vt){gj(h,y,vt)}finally{Z!==null&&Ne.types!==null&&(Z.types=Ne.types),re.T=Z}}else try{Z=_(V,j),NU(h,y,Z)}catch(vt){gj(h,y,vt)}}function NU(h,y,_){_!==null&&typeof _=="object"&&typeof _.then=="function"?_.then(function(j){CU(h,y,j)},function(j){return gj(h,y,j)}):CU(h,y,_)}function CU(h,y,_){y.status="fulfilled",y.value=_,PU(y),h.state=_,y=h.pending,y!==null&&(_=y.next,_===y?h.pending=null:(_=_.next,y.next=_,kU(h,_)))}function gj(h,y,_){var j=h.pending;if(h.pending=null,j!==null){j=j.next;do y.status="rejected",y.reason=_,PU(y),y=y.next;while(y!==j)}h.action=null}function PU(h){h=h.listeners;for(var y=0;y<h.length;y++)(0,h[y])()}function TU(h,y){return y}function AU(h,y){if(Sr){var _=oa.formState;if(_!==null){e:{var j=Xn;if(Sr){if(xa){t:{for(var V=xa,Z=El;V.nodeType!==8;){if(!Z){V=null;break t}if(V=Fl(V.nextSibling),V===null){V=null;break t}}Z=V.data,V=Z==="F!"||Z==="F"?V:null}if(V){xa=Fl(V.nextSibling),j=V.data==="F!";break e}}Km(j)}j=!1}j&&(y=_[0])}}return _=Zs(),_.memoizedState=_.baseState=y,j={pending:null,lanes:0,dispatch:null,lastRenderedReducer:TU,lastRenderedState:y},_.queue=j,_=KU.bind(null,Xn,j),j.dispatch=_,j=fj(!1),Z=Sj.bind(null,Xn,!1,j.queue),j=Zs(),V={state:y,dispatch:null,action:h,pending:null},j.queue=V,_=ede.bind(null,Xn,V,Z,_),V.dispatch=_,j.memoizedState=h,[y,_,!1]}function jU(h){var y=ii();return MU(y,Xr,h)}function MU(h,y,_){if(y=hj(h,y,TU)[0],h=g_(pu)[0],typeof y=="object"&&y!==null&&typeof y.then=="function")try{var j=dv(y)}catch(Ne){throw Ne===ub?s_:Ne}else j=y;y=ii();var V=y.queue,Z=V.dispatch;return _!==y.memoizedState&&(Xn.flags|=2048,gb(9,{destroy:void 0},tde.bind(null,V,_),null)),[j,Z,h]}function tde(h,y){h.action=y}function EU(h){var y=ii(),_=Xr;if(_!==null)return MU(y,_,h);ii(),y=y.memoizedState,_=ii();var j=_.queue.dispatch;return _.memoizedState=h,[y,j,!1]}function gb(h,y,_,j){return h={tag:h,create:_,deps:j,inst:y,next:null},y=Xn.updateQueue,y===null&&(y=p_(),Xn.updateQueue=y),_=y.lastEffect,_===null?y.lastEffect=h.next=h:(j=_.next,_.next=h,h.next=j,y.lastEffect=h),h}function DU(){return ii().memoizedState}function b_(h,y,_,j){var V=Zs();Xn.flags|=h,V.memoizedState=gb(1|y,{destroy:void 0},_,j===void 0?null:j)}function x_(h,y,_,j){var V=ii();j=j===void 0?null:j;var Z=V.memoizedState.inst;Xr!==null&&j!==null&&oj(j,Xr.memoizedState.deps)?V.memoizedState=gb(y,Z,_,j):(Xn.flags|=h,V.memoizedState=gb(1|y,Z,_,j))}function FU(h,y){b_(8390656,8,h,y)}function bj(h,y){x_(2048,8,h,y)}function nde(h){Xn.flags|=4;var y=Xn.updateQueue;if(y===null)y=p_(),Xn.updateQueue=y,y.events=[h];else{var _=y.events;_===null?y.events=[h]:_.push(h)}}function RU(h){var y=ii().memoizedState;return nde({ref:y,nextImpl:h}),function(){if((Ir&2)!==0)throw Error(r(440));return y.impl.apply(void 0,arguments)}}function LU(h,y){return x_(4,2,h,y)}function IU(h,y){return x_(4,4,h,y)}function OU(h,y){if(typeof y=="function"){h=h();var _=y(h);return function(){typeof _=="function"?_():y(null)}}if(y!=null)return h=h(),y.current=h,function(){y.current=null}}function zU(h,y,_){_=_!=null?_.concat([h]):null,x_(4,4,OU.bind(null,y,h),_)}function xj(){}function UU(h,y){var _=ii();y=y===void 0?null:y;var j=_.memoizedState;return y!==null&&oj(y,j[1])?j[0]:(_.memoizedState=[h,y],h)}function BU(h,y){var _=ii();y=y===void 0?null:y;var j=_.memoizedState;if(y!==null&&oj(y,j[1]))return j[0];if(j=h(),cf){Me(!0);try{h()}finally{Me(!1)}}return _.memoizedState=[j,y],j}function yj(h,y,_){return _===void 0||(hu&1073741824)!==0&&(yr&261930)===0?h.memoizedState=y:(h.memoizedState=_,h=HB(),Xn.lanes|=h,rh|=h,_)}function HU(h,y,_,j){return _o(_,y)?_:hb.current!==null?(h=yj(h,_,j),_o(h,y)||(hi=!0),h):(hu&42)===0||(hu&1073741824)!==0&&(yr&261930)===0?(hi=!0,h.memoizedState=_):(h=HB(),Xn.lanes|=h,rh|=h,y)}function qU(h,y,_,j,V){var Z=J.p;J.p=Z!==0&&8>Z?Z:8;var Ne=re.T,qe={};re.T=qe,Sj(h,!1,y,_);try{var lt=V(),vt=re.S;if(vt!==null&&vt(qe,lt),lt!==null&&typeof lt=="object"&&typeof lt.then=="function"){var Rt=Qce(lt,j);uv(h,y,Rt,Zo(h))}else uv(h,y,j,Zo(h))}catch(Ut){uv(h,y,{then:function(){},status:"rejected",reason:Ut},Zo())}finally{J.p=Z,Ne!==null&&qe.types!==null&&(Ne.types=qe.types),re.T=Ne}}function rde(){}function vj(h,y,_,j){if(h.tag!==5)throw Error(r(476));var V=$U(h).queue;qU(h,V,y,ue,_===null?rde:function(){return VU(h),_(j)})}function $U(h){var y=h.memoizedState;if(y!==null)return y;y={memoizedState:ue,baseState:ue,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:pu,lastRenderedState:ue},next:null};var _={};return y.next={memoizedState:_,baseState:_,baseQueue:null,queue:{pending:null,lanes:0,dispatch:null,lastRenderedReducer:pu,lastRenderedState:_},next:null},h.memoizedState=y,h=h.alternate,h!==null&&(h.memoizedState=y),y}function VU(h){var y=$U(h);y.next===null&&(y=h.alternate.memoizedState),uv(h,y.next.queue,{},Zo())}function wj(){return ds(Tv)}function GU(){return ii().memoizedState}function WU(){return ii().memoizedState}function ade(h){for(var y=h.return;y!==null;){switch(y.tag){case 24:case 3:var _=Zo();h=Qm(_);var j=Jm(y,h,_);j!==null&&(To(j,y,_),sv(j,y,_)),y={cache:YA()},h.payload=y;return}y=y.return}}function ide(h,y,_){var j=Zo();_={lane:j,revertLane:0,gesture:null,action:_,hasEagerState:!1,eagerState:null,next:null},y_(h)?XU(y,_):(_=zA(h,y,_,j),_!==null&&(To(_,h,j),YU(_,y,j)))}function KU(h,y,_){var j=Zo();uv(h,y,_,j)}function uv(h,y,_,j){var V={lane:j,revertLane:0,gesture:null,action:_,hasEagerState:!1,eagerState:null,next:null};if(y_(h))XU(y,V);else{var Z=h.alternate;if(h.lanes===0&&(Z===null||Z.lanes===0)&&(Z=y.lastRenderedReducer,Z!==null))try{var Ne=y.lastRenderedState,qe=Z(Ne,_);if(V.hasEagerState=!0,V.eagerState=qe,_o(qe,Ne))return ZS(h,y,V,0),oa===null&&JS(),!1}catch{}if(_=zA(h,y,V,j),_!==null)return To(_,h,j),YU(_,y,j),!0}return!1}function Sj(h,y,_,j){if(j={lane:2,revertLane:eM(),gesture:null,action:j,hasEagerState:!1,eagerState:null,next:null},y_(h)){if(y)throw Error(r(479))}else y=zA(h,_,j,2),y!==null&&To(y,h,2)}function y_(h){var y=h.alternate;return h===Xn||y!==null&&y===Xn}function XU(h,y){pb=m_=!0;var _=h.pending;_===null?y.next=y:(y.next=_.next,_.next=y),h.pending=y}function YU(h,y,_){if((_&4194048)!==0){var j=y.lanes;j&=h.pendingLanes,_|=j,y.lanes=_,qt(h,_)}}var mv={readContext:ds,use:f_,useCallback:$a,useContext:$a,useEffect:$a,useImperativeHandle:$a,useLayoutEffect:$a,useInsertionEffect:$a,useMemo:$a,useReducer:$a,useRef:$a,useState:$a,useDebugValue:$a,useDeferredValue:$a,useTransition:$a,useSyncExternalStore:$a,useId:$a,useHostTransitionStatus:$a,useFormState:$a,useActionState:$a,useOptimistic:$a,useMemoCache:$a,useCacheRefresh:$a};mv.useEffectEvent=$a;var QU={readContext:ds,use:f_,useCallback:function(h,y){return Zs().memoizedState=[h,y===void 0?null:y],h},useContext:ds,useEffect:FU,useImperativeHandle:function(h,y,_){_=_!=null?_.concat([h]):null,b_(4194308,4,OU.bind(null,y,h),_)},useLayoutEffect:function(h,y){return b_(4194308,4,h,y)},useInsertionEffect:function(h,y){b_(4,2,h,y)},useMemo:function(h,y){var _=Zs();y=y===void 0?null:y;var j=h();if(cf){Me(!0);try{h()}finally{Me(!1)}}return _.memoizedState=[j,y],j},useReducer:function(h,y,_){var j=Zs();if(_!==void 0){var V=_(y);if(cf){Me(!0);try{_(y)}finally{Me(!1)}}}else V=y;return j.memoizedState=j.baseState=V,h={pending:null,lanes:0,dispatch:null,lastRenderedReducer:h,lastRenderedState:V},j.queue=h,h=h.dispatch=ide.bind(null,Xn,h),[j.memoizedState,h]},useRef:function(h){var y=Zs();return h={current:h},y.memoizedState=h},useState:function(h){h=fj(h);var y=h.queue,_=KU.bind(null,Xn,y);return y.dispatch=_,[h.memoizedState,_]},useDebugValue:xj,useDeferredValue:function(h,y){var _=Zs();return yj(_,h,y)},useTransition:function(){var h=fj(!1);return h=qU.bind(null,Xn,h.queue,!0,!1),Zs().memoizedState=h,[!1,h]},useSyncExternalStore:function(h,y,_){var j=Xn,V=Zs();if(Sr){if(_===void 0)throw Error(r(407));_=_()}else{if(_=y(),oa===null)throw Error(r(349));(yr&127)!==0||xU(j,y,_)}V.memoizedState=_;var Z={value:_,getSnapshot:y};return V.queue=Z,FU(vU.bind(null,j,Z,h),[h]),j.flags|=2048,gb(9,{destroy:void 0},yU.bind(null,j,Z,_,y),null),_},useId:function(){var h=Zs(),y=oa.identifierPrefix;if(Sr){var _=cd,j=ld;_=(j&~(1<<32-Oe(j)-1)).toString(32)+_,y="_"+y+"R_"+_,_=h_++,0<_&&(y+="H"+_.toString(32)),y+="_"}else _=Jce++,y="_"+y+"r_"+_.toString(32)+"_";return h.memoizedState=y},useHostTransitionStatus:wj,useFormState:AU,useActionState:AU,useOptimistic:function(h){var y=Zs();y.memoizedState=y.baseState=h;var _={pending:null,lanes:0,dispatch:null,lastRenderedReducer:null,lastRenderedState:null};return y.queue=_,y=Sj.bind(null,Xn,!0,_),_.dispatch=y,[h,y]},useMemoCache:mj,useCacheRefresh:function(){return Zs().memoizedState=ade.bind(null,Xn)},useEffectEvent:function(h){var y=Zs(),_={impl:h};return y.memoizedState=_,function(){if((Ir&2)!==0)throw Error(r(440));return _.impl.apply(void 0,arguments)}}},_j={readContext:ds,use:f_,useCallback:UU,useContext:ds,useEffect:bj,useImperativeHandle:zU,useInsertionEffect:LU,useLayoutEffect:IU,useMemo:BU,useReducer:g_,useRef:DU,useState:function(){return g_(pu)},useDebugValue:xj,useDeferredValue:function(h,y){var _=ii();return HU(_,Xr.memoizedState,h,y)},useTransition:function(){var h=g_(pu)[0],y=ii().memoizedState;return[typeof h=="boolean"?h:dv(h),y]},useSyncExternalStore:bU,useId:GU,useHostTransitionStatus:wj,useFormState:jU,useActionState:jU,useOptimistic:function(h,y){var _=ii();return _U(_,Xr,h,y)},useMemoCache:mj,useCacheRefresh:WU};_j.useEffectEvent=RU;var JU={readContext:ds,use:f_,useCallback:UU,useContext:ds,useEffect:bj,useImperativeHandle:zU,useInsertionEffect:LU,useLayoutEffect:IU,useMemo:BU,useReducer:pj,useRef:DU,useState:function(){return pj(pu)},useDebugValue:xj,useDeferredValue:function(h,y){var _=ii();return Xr===null?yj(_,h,y):HU(_,Xr.memoizedState,h,y)},useTransition:function(){var h=pj(pu)[0],y=ii().memoizedState;return[typeof h=="boolean"?h:dv(h),y]},useSyncExternalStore:bU,useId:GU,useHostTransitionStatus:wj,useFormState:EU,useActionState:EU,useOptimistic:function(h,y){var _=ii();return Xr!==null?_U(_,Xr,h,y):(_.baseState=h,[h,_.queue.dispatch])},useMemoCache:mj,useCacheRefresh:WU};JU.useEffectEvent=RU;function kj(h,y,_,j){y=h.memoizedState,_=_(j,y),_=_==null?y:m({},y,_),h.memoizedState=_,h.lanes===0&&(h.updateQueue.baseState=_)}var Nj={enqueueSetState:function(h,y,_){h=h._reactInternals;var j=Zo(),V=Qm(j);V.payload=y,_!=null&&(V.callback=_),y=Jm(h,V,j),y!==null&&(To(y,h,j),sv(y,h,j))},enqueueReplaceState:function(h,y,_){h=h._reactInternals;var j=Zo(),V=Qm(j);V.tag=1,V.payload=y,_!=null&&(V.callback=_),y=Jm(h,V,j),y!==null&&(To(y,h,j),sv(y,h,j))},enqueueForceUpdate:function(h,y){h=h._reactInternals;var _=Zo(),j=Qm(_);j.tag=2,y!=null&&(j.callback=y),y=Jm(h,j,_),y!==null&&(To(y,h,_),sv(y,h,_))}};function ZU(h,y,_,j,V,Z,Ne){return h=h.stateNode,typeof h.shouldComponentUpdate=="function"?h.shouldComponentUpdate(j,Z,Ne):y.prototype&&y.prototype.isPureReactComponent?!Vm(_,j)||!Vm(V,Z):!0}function eB(h,y,_,j){h=y.state,typeof y.componentWillReceiveProps=="function"&&y.componentWillReceiveProps(_,j),typeof y.UNSAFE_componentWillReceiveProps=="function"&&y.UNSAFE_componentWillReceiveProps(_,j),y.state!==h&&Nj.enqueueReplaceState(y,y.state,null)}function df(h,y){var _=y;if("ref"in y){_={};for(var j in y)j!=="ref"&&(_[j]=y[j])}if(h=h.defaultProps){_===y&&(_=m({},_));for(var V in h)_[V]===void 0&&(_[V]=h[V])}return _}function tB(h){QS(h)}function nB(h){console.error(h)}function rB(h){QS(h)}function v_(h,y){try{var _=h.onUncaughtError;_(y.value,{componentStack:y.stack})}catch(j){setTimeout(function(){throw j})}}function aB(h,y,_){try{var j=h.onCaughtError;j(_.value,{componentStack:_.stack,errorBoundary:y.tag===1?y.stateNode:null})}catch(V){setTimeout(function(){throw V})}}function Cj(h,y,_){return _=Qm(_),_.tag=3,_.payload={element:null},_.callback=function(){v_(h,y)},_}function iB(h){return h=Qm(h),h.tag=3,h}function sB(h,y,_,j){var V=_.type.getDerivedStateFromError;if(typeof V=="function"){var Z=j.value;h.payload=function(){return V(Z)},h.callback=function(){aB(y,_,j)}}var Ne=_.stateNode;Ne!==null&&typeof Ne.componentDidCatch=="function"&&(h.callback=function(){aB(y,_,j),typeof V!="function"&&(ah===null?ah=new Set([this]):ah.add(this));var qe=j.stack;this.componentDidCatch(j.value,{componentStack:qe!==null?qe:""})})}function sde(h,y,_,j,V){if(_.flags|=32768,j!==null&&typeof j=="object"&&typeof j.then=="function"){if(y=_.alternate,y!==null&&lb(y,_,V,!0),_=Xo.current,_!==null){switch(_.tag){case 31:case 13:return Dl===null?E_():_.alternate===null&&Va===0&&(Va=3),_.flags&=-257,_.flags|=65536,_.lanes=V,j===o_?_.flags|=16384:(y=_.updateQueue,y===null?_.updateQueue=new Set([j]):y.add(j),Qj(h,j,V)),!1;case 22:return _.flags|=65536,j===o_?_.flags|=16384:(y=_.updateQueue,y===null?(y={transitions:null,markerInstances:null,retryQueue:new Set([j])},_.updateQueue=y):(_=y.retryQueue,_===null?y.retryQueue=new Set([j]):_.add(j)),Qj(h,j,V)),!1}throw Error(r(435,_.tag))}return Qj(h,j,V),E_(),!1}if(Sr)return y=Xo.current,y!==null?((y.flags&65536)===0&&(y.flags|=256),y.flags|=65536,y.lanes=V,j!==VA&&(h=Error(r(422),{cause:j}),tv(Al(h,_)))):(j!==VA&&(y=Error(r(423),{cause:j}),tv(Al(y,_))),h=h.current.alternate,h.flags|=65536,V&=-V,h.lanes|=V,j=Al(j,_),V=Cj(h.stateNode,j,V),nj(h,V),Va!==4&&(Va=2)),!1;var Z=Error(r(520),{cause:j});if(Z=Al(Z,_),vv===null?vv=[Z]:vv.push(Z),Va!==4&&(Va=2),y===null)return!0;j=Al(j,_),_=y;do{switch(_.tag){case 3:return _.flags|=65536,h=V&-V,_.lanes|=h,h=Cj(_.stateNode,j,h),nj(_,h),!1;case 1:if(y=_.type,Z=_.stateNode,(_.flags&128)===0&&(typeof y.getDerivedStateFromError=="function"||Z!==null&&typeof Z.componentDidCatch=="function"&&(ah===null||!ah.has(Z))))return _.flags|=65536,V&=-V,_.lanes|=V,V=iB(V),sB(V,h,_,j),nj(_,V),!1}_=_.return}while(_!==null);return!1}var Pj=Error(r(461)),hi=!1;function us(h,y,_,j){y.child=h===null?dU(y,null,_,j):lf(y,h.child,_,j)}function oB(h,y,_,j,V){_=_.render;var Z=y.ref;if("ref"in j){var Ne={};for(var qe in j)qe!=="ref"&&(Ne[qe]=j[qe])}else Ne=j;return rf(y),j=lj(h,y,_,Ne,Z,V),qe=cj(),h!==null&&!hi?(dj(h,y,V),fu(h,y,V)):(Sr&&qe&&qA(y),y.flags|=1,us(h,y,j,V),y.child)}function lB(h,y,_,j,V){if(h===null){var Z=_.type;return typeof Z=="function"&&!UA(Z)&&Z.defaultProps===void 0&&_.compare===null?(y.tag=15,y.type=Z,cB(h,y,Z,j,V)):(h=t_(_.type,null,j,y,y.mode,V),h.ref=y.ref,h.return=y,y.child=h)}if(Z=h.child,!Rj(h,V)){var Ne=Z.memoizedProps;if(_=_.compare,_=_!==null?_:Vm,_(Ne,j)&&h.ref===y.ref)return fu(h,y,V)}return y.flags|=1,h=cu(Z,j),h.ref=y.ref,h.return=y,y.child=h}function cB(h,y,_,j,V){if(h!==null){var Z=h.memoizedProps;if(Vm(Z,j)&&h.ref===y.ref)if(hi=!1,y.pendingProps=j=Z,Rj(h,V))(h.flags&131072)!==0&&(hi=!0);else return y.lanes=h.lanes,fu(h,y,V)}return Tj(h,y,_,j,V)}function dB(h,y,_,j){var V=j.children,Z=h!==null?h.memoizedState:null;if(h===null&&y.stateNode===null&&(y.stateNode={_visibility:1,_pendingMarkers:null,_retryCache:null,_transitions:null}),j.mode==="hidden"){if((y.flags&128)!==0){if(Z=Z!==null?Z.baseLanes|_:_,h!==null){for(j=y.child=h.child,V=0;j!==null;)V=V|j.lanes|j.childLanes,j=j.sibling;j=V&~Z}else j=0,y.child=null;return uB(h,y,Z,_,j)}if((_&536870912)!==0)y.memoizedState={baseLanes:0,cachePool:null},h!==null&&i_(y,Z!==null?Z.cachePool:null),Z!==null?hU(y,Z):aj(),pU(y);else return j=y.lanes=536870912,uB(h,y,Z!==null?Z.baseLanes|_:_,_,j)}else Z!==null?(i_(y,Z.cachePool),hU(y,Z),eh(),y.memoizedState=null):(h!==null&&i_(y,null),aj(),eh());return us(h,y,V,_),y.child}function hv(h,y){return h!==null&&h.tag===22||y.stateNode!==null||(y.stateNode={_visibility:1,_pendingMarkers:null,_retryCache:null,_transitions:null}),y.sibling}function uB(h,y,_,j,V){var Z=JA();return Z=Z===null?null:{parent:ui._currentValue,pool:Z},y.memoizedState={baseLanes:_,cachePool:Z},h!==null&&i_(y,null),aj(),pU(y),h!==null&&lb(h,y,j,!0),y.childLanes=V,null}function w_(h,y){return y=__({mode:y.mode,children:y.children},h.mode),y.ref=h.ref,h.child=y,y.return=h,y}function mB(h,y,_){return lf(y,h.child,null,_),h=w_(y,y.pendingProps),h.flags|=2,Yo(y),y.memoizedState=null,h}function ode(h,y,_){var j=y.pendingProps,V=(y.flags&128)!==0;if(y.flags&=-129,h===null){if(Sr){if(j.mode==="hidden")return h=w_(y,j),y.lanes=536870912,hv(null,h);if(sj(y),(h=xa)?(h=k8(h,El),h=h!==null&&h.data==="&"?h:null,h!==null&&(y.memoizedState={dehydrated:h,treeContext:Gm!==null?{id:ld,overflow:cd}:null,retryLane:536870912,hydrationErrors:null},_=X5(h),_.return=y,y.child=_,cs=y,xa=null)):h=null,h===null)throw Km(y);return y.lanes=536870912,null}return w_(y,j)}var Z=h.memoizedState;if(Z!==null){var Ne=Z.dehydrated;if(sj(y),V)if(y.flags&256)y.flags&=-257,y=mB(h,y,_);else if(y.memoizedState!==null)y.child=h.child,y.flags|=128,y=null;else throw Error(r(558));else if(hi||lb(h,y,_,!1),V=(_&h.childLanes)!==0,hi||V){if(j=oa,j!==null&&(Ne=Vt(j,_),Ne!==0&&Ne!==Z.retryLane))throw Z.retryLane=Ne,Zp(h,Ne),To(j,h,Ne),Pj;E_(),y=mB(h,y,_)}else h=Z.treeContext,xa=Fl(Ne.nextSibling),cs=y,Sr=!0,Wm=null,El=!1,h!==null&&J5(y,h),y=w_(y,j),y.flags|=4096;return y}return h=cu(h.child,{mode:j.mode,children:j.children}),h.ref=y.ref,y.child=h,h.return=y,h}function S_(h,y){var _=y.ref;if(_===null)h!==null&&h.ref!==null&&(y.flags|=4194816);else{if(typeof _!="function"&&typeof _!="object")throw Error(r(284));(h===null||h.ref!==_)&&(y.flags|=4194816)}}function Tj(h,y,_,j,V){return rf(y),_=lj(h,y,_,j,void 0,V),j=cj(),h!==null&&!hi?(dj(h,y,V),fu(h,y,V)):(Sr&&j&&qA(y),y.flags|=1,us(h,y,_,V),y.child)}function hB(h,y,_,j,V,Z){return rf(y),y.updateQueue=null,_=gU(y,j,_,V),fU(h),j=cj(),h!==null&&!hi?(dj(h,y,Z),fu(h,y,Z)):(Sr&&j&&qA(y),y.flags|=1,us(h,y,_,Z),y.child)}function pB(h,y,_,j,V){if(rf(y),y.stateNode===null){var Z=ab,Ne=_.contextType;typeof Ne=="object"&&Ne!==null&&(Z=ds(Ne)),Z=new _(j,Z),y.memoizedState=Z.state!==null&&Z.state!==void 0?Z.state:null,Z.updater=Nj,y.stateNode=Z,Z._reactInternals=y,Z=y.stateNode,Z.props=j,Z.state=y.memoizedState,Z.refs={},ej(y),Ne=_.contextType,Z.context=typeof Ne=="object"&&Ne!==null?ds(Ne):ab,Z.state=y.memoizedState,Ne=_.getDerivedStateFromProps,typeof Ne=="function"&&(kj(y,_,Ne,j),Z.state=y.memoizedState),typeof _.getDerivedStateFromProps=="function"||typeof Z.getSnapshotBeforeUpdate=="function"||typeof Z.UNSAFE_componentWillMount!="function"&&typeof Z.componentWillMount!="function"||(Ne=Z.state,typeof Z.componentWillMount=="function"&&Z.componentWillMount(),typeof Z.UNSAFE_componentWillMount=="function"&&Z.UNSAFE_componentWillMount(),Ne!==Z.state&&Nj.enqueueReplaceState(Z,Z.state,null),lv(y,j,Z,V),ov(),Z.state=y.memoizedState),typeof Z.componentDidMount=="function"&&(y.flags|=4194308),j=!0}else if(h===null){Z=y.stateNode;var qe=y.memoizedProps,lt=df(_,qe);Z.props=lt;var vt=Z.context,Rt=_.contextType;Ne=ab,typeof Rt=="object"&&Rt!==null&&(Ne=ds(Rt));var Ut=_.getDerivedStateFromProps;Rt=typeof Ut=="function"||typeof Z.getSnapshotBeforeUpdate=="function",qe=y.pendingProps!==qe,Rt||typeof Z.UNSAFE_componentWillReceiveProps!="function"&&typeof Z.componentWillReceiveProps!="function"||(qe||vt!==Ne)&&eB(y,Z,j,Ne),Ym=!1;var kt=y.memoizedState;Z.state=kt,lv(y,j,Z,V),ov(),vt=y.memoizedState,qe||kt!==vt||Ym?(typeof Ut=="function"&&(kj(y,_,Ut,j),vt=y.memoizedState),(lt=Ym||ZU(y,_,lt,j,kt,vt,Ne))?(Rt||typeof Z.UNSAFE_componentWillMount!="function"&&typeof Z.componentWillMount!="function"||(typeof Z.componentWillMount=="function"&&Z.componentWillMount(),typeof Z.UNSAFE_componentWillMount=="function"&&Z.UNSAFE_componentWillMount()),typeof Z.componentDidMount=="function"&&(y.flags|=4194308)):(typeof Z.componentDidMount=="function"&&(y.flags|=4194308),y.memoizedProps=j,y.memoizedState=vt),Z.props=j,Z.state=vt,Z.context=Ne,j=lt):(typeof Z.componentDidMount=="function"&&(y.flags|=4194308),j=!1)}else{Z=y.stateNode,tj(h,y),Ne=y.memoizedProps,Rt=df(_,Ne),Z.props=Rt,Ut=y.pendingProps,kt=Z.context,vt=_.contextType,lt=ab,typeof vt=="object"&&vt!==null&&(lt=ds(vt)),qe=_.getDerivedStateFromProps,(vt=typeof qe=="function"||typeof Z.getSnapshotBeforeUpdate=="function")||typeof Z.UNSAFE_componentWillReceiveProps!="function"&&typeof Z.componentWillReceiveProps!="function"||(Ne!==Ut||kt!==lt)&&eB(y,Z,j,lt),Ym=!1,kt=y.memoizedState,Z.state=kt,lv(y,j,Z,V),ov();var At=y.memoizedState;Ne!==Ut||kt!==At||Ym||h!==null&&h.dependencies!==null&&r_(h.dependencies)?(typeof qe=="function"&&(kj(y,_,qe,j),At=y.memoizedState),(Rt=Ym||ZU(y,_,Rt,j,kt,At,lt)||h!==null&&h.dependencies!==null&&r_(h.dependencies))?(vt||typeof Z.UNSAFE_componentWillUpdate!="function"&&typeof Z.componentWillUpdate!="function"||(typeof Z.componentWillUpdate=="function"&&Z.componentWillUpdate(j,At,lt),typeof Z.UNSAFE_componentWillUpdate=="function"&&Z.UNSAFE_componentWillUpdate(j,At,lt)),typeof Z.componentDidUpdate=="function"&&(y.flags|=4),typeof Z.getSnapshotBeforeUpdate=="function"&&(y.flags|=1024)):(typeof Z.componentDidUpdate!="function"||Ne===h.memoizedProps&&kt===h.memoizedState||(y.flags|=4),typeof Z.getSnapshotBeforeUpdate!="function"||Ne===h.memoizedProps&&kt===h.memoizedState||(y.flags|=1024),y.memoizedProps=j,y.memoizedState=At),Z.props=j,Z.state=At,Z.context=lt,j=Rt):(typeof Z.componentDidUpdate!="function"||Ne===h.memoizedProps&&kt===h.memoizedState||(y.flags|=4),typeof Z.getSnapshotBeforeUpdate!="function"||Ne===h.memoizedProps&&kt===h.memoizedState||(y.flags|=1024),j=!1)}return Z=j,S_(h,y),j=(y.flags&128)!==0,Z||j?(Z=y.stateNode,_=j&&typeof _.getDerivedStateFromError!="function"?null:Z.render(),y.flags|=1,h!==null&&j?(y.child=lf(y,h.child,null,V),y.child=lf(y,null,_,V)):us(h,y,_,V),y.memoizedState=Z.state,h=y.child):h=fu(h,y,V),h}function fB(h,y,_,j){return tf(),y.flags|=256,us(h,y,_,j),y.child}var Aj={dehydrated:null,treeContext:null,retryLane:0,hydrationErrors:null};function jj(h){return{baseLanes:h,cachePool:aU()}}function Mj(h,y,_){return h=h!==null?h.childLanes&~_:0,y&&(h|=Jo),h}function gB(h,y,_){var j=y.pendingProps,V=!1,Z=(y.flags&128)!==0,Ne;if((Ne=Z)||(Ne=h!==null&&h.memoizedState===null?!1:(ai.current&2)!==0),Ne&&(V=!0,y.flags&=-129),Ne=(y.flags&32)!==0,y.flags&=-33,h===null){if(Sr){if(V?Zm(y):eh(),(h=xa)?(h=k8(h,El),h=h!==null&&h.data!=="&"?h:null,h!==null&&(y.memoizedState={dehydrated:h,treeContext:Gm!==null?{id:ld,overflow:cd}:null,retryLane:536870912,hydrationErrors:null},_=X5(h),_.return=y,y.child=_,cs=y,xa=null)):h=null,h===null)throw Km(y);return hM(h)?y.lanes=32:y.lanes=536870912,null}var qe=j.children;return j=j.fallback,V?(eh(),V=y.mode,qe=__({mode:"hidden",children:qe},V),j=ef(j,V,_,null),qe.return=y,j.return=y,qe.sibling=j,y.child=qe,j=y.child,j.memoizedState=jj(_),j.childLanes=Mj(h,Ne,_),y.memoizedState=Aj,hv(null,j)):(Zm(y),Ej(y,qe))}var lt=h.memoizedState;if(lt!==null&&(qe=lt.dehydrated,qe!==null)){if(Z)y.flags&256?(Zm(y),y.flags&=-257,y=Dj(h,y,_)):y.memoizedState!==null?(eh(),y.child=h.child,y.flags|=128,y=null):(eh(),qe=j.fallback,V=y.mode,j=__({mode:"visible",children:j.children},V),qe=ef(qe,V,_,null),qe.flags|=2,j.return=y,qe.return=y,j.sibling=qe,y.child=j,lf(y,h.child,null,_),j=y.child,j.memoizedState=jj(_),j.childLanes=Mj(h,Ne,_),y.memoizedState=Aj,y=hv(null,j));else if(Zm(y),hM(qe)){if(Ne=qe.nextSibling&&qe.nextSibling.dataset,Ne)var vt=Ne.dgst;Ne=vt,j=Error(r(419)),j.stack="",j.digest=Ne,tv({value:j,source:null,stack:null}),y=Dj(h,y,_)}else if(hi||lb(h,y,_,!1),Ne=(_&h.childLanes)!==0,hi||Ne){if(Ne=oa,Ne!==null&&(j=Vt(Ne,_),j!==0&&j!==lt.retryLane))throw lt.retryLane=j,Zp(h,j),To(Ne,h,j),Pj;mM(qe)||E_(),y=Dj(h,y,_)}else mM(qe)?(y.flags|=192,y.child=h.child,y=null):(h=lt.treeContext,xa=Fl(qe.nextSibling),cs=y,Sr=!0,Wm=null,El=!1,h!==null&&J5(y,h),y=Ej(y,j.children),y.flags|=4096);return y}return V?(eh(),qe=j.fallback,V=y.mode,lt=h.child,vt=lt.sibling,j=cu(lt,{mode:"hidden",children:j.children}),j.subtreeFlags=lt.subtreeFlags&65011712,vt!==null?qe=cu(vt,qe):(qe=ef(qe,V,_,null),qe.flags|=2),qe.return=y,j.return=y,j.sibling=qe,y.child=j,hv(null,j),j=y.child,qe=h.child.memoizedState,qe===null?qe=jj(_):(V=qe.cachePool,V!==null?(lt=ui._currentValue,V=V.parent!==lt?{parent:lt,pool:lt}:V):V=aU(),qe={baseLanes:qe.baseLanes|_,cachePool:V}),j.memoizedState=qe,j.childLanes=Mj(h,Ne,_),y.memoizedState=Aj,hv(h.child,j)):(Zm(y),_=h.child,h=_.sibling,_=cu(_,{mode:"visible",children:j.children}),_.return=y,_.sibling=null,h!==null&&(Ne=y.deletions,Ne===null?(y.deletions=[h],y.flags|=16):Ne.push(h)),y.child=_,y.memoizedState=null,_)}function Ej(h,y){return y=__({mode:"visible",children:y},h.mode),y.return=h,h.child=y}function __(h,y){return h=Ko(22,h,null,y),h.lanes=0,h}function Dj(h,y,_){return lf(y,h.child,null,_),h=Ej(y,y.pendingProps.children),h.flags|=2,y.memoizedState=null,h}function bB(h,y,_){h.lanes|=y;var j=h.alternate;j!==null&&(j.lanes|=y),KA(h.return,y,_)}function Fj(h,y,_,j,V,Z){var Ne=h.memoizedState;Ne===null?h.memoizedState={isBackwards:y,rendering:null,renderingStartTime:0,last:j,tail:_,tailMode:V,treeForkCount:Z}:(Ne.isBackwards=y,Ne.rendering=null,Ne.renderingStartTime=0,Ne.last=j,Ne.tail=_,Ne.tailMode=V,Ne.treeForkCount=Z)}function xB(h,y,_){var j=y.pendingProps,V=j.revealOrder,Z=j.tail;j=j.children;var Ne=ai.current,qe=(Ne&2)!==0;if(qe?(Ne=Ne&1|2,y.flags|=128):Ne&=1,pe(ai,Ne),us(h,y,j,_),j=Sr?ev:0,!qe&&h!==null&&(h.flags&128)!==0)e:for(h=y.child;h!==null;){if(h.tag===13)h.memoizedState!==null&&bB(h,_,y);else if(h.tag===19)bB(h,_,y);else if(h.child!==null){h.child.return=h,h=h.child;continue}if(h===y)break e;for(;h.sibling===null;){if(h.return===null||h.return===y)break e;h=h.return}h.sibling.return=h.return,h=h.sibling}switch(V){case"forwards":for(_=y.child,V=null;_!==null;)h=_.alternate,h!==null&&u_(h)===null&&(V=_),_=_.sibling;_=V,_===null?(V=y.child,y.child=null):(V=_.sibling,_.sibling=null),Fj(y,!1,V,_,Z,j);break;case"backwards":case"unstable_legacy-backwards":for(_=null,V=y.child,y.child=null;V!==null;){if(h=V.alternate,h!==null&&u_(h)===null){y.child=V;break}h=V.sibling,V.sibling=_,_=V,V=h}Fj(y,!0,_,null,Z,j);break;case"together":Fj(y,!1,null,null,void 0,j);break;default:y.memoizedState=null}return y.child}function fu(h,y,_){if(h!==null&&(y.dependencies=h.dependencies),rh|=y.lanes,(_&y.childLanes)===0)if(h!==null){if(lb(h,y,_,!1),(_&y.childLanes)===0)return null}else return null;if(h!==null&&y.child!==h.child)throw Error(r(153));if(y.child!==null){for(h=y.child,_=cu(h,h.pendingProps),y.child=_,_.return=y;h.sibling!==null;)h=h.sibling,_=_.sibling=cu(h,h.pendingProps),_.return=y;_.sibling=null}return y.child}function Rj(h,y){return(h.lanes&y)!==0?!0:(h=h.dependencies,!!(h!==null&&r_(h)))}function lde(h,y,_){switch(y.tag){case 3:D(y,y.stateNode.containerInfo),Xm(y,ui,h.memoizedState.cache),tf();break;case 27:case 5:U(y);break;case 4:D(y,y.stateNode.containerInfo);break;case 10:Xm(y,y.type,y.memoizedProps.value);break;case 31:if(y.memoizedState!==null)return y.flags|=128,sj(y),null;break;case 13:var j=y.memoizedState;if(j!==null)return j.dehydrated!==null?(Zm(y),y.flags|=128,null):(_&y.child.childLanes)!==0?gB(h,y,_):(Zm(y),h=fu(h,y,_),h!==null?h.sibling:null);Zm(y);break;case 19:var V=(h.flags&128)!==0;if(j=(_&y.childLanes)!==0,j||(lb(h,y,_,!1),j=(_&y.childLanes)!==0),V){if(j)return xB(h,y,_);y.flags|=128}if(V=y.memoizedState,V!==null&&(V.rendering=null,V.tail=null,V.lastEffect=null),pe(ai,ai.current),j)break;return null;case 22:return y.lanes=0,dB(h,y,_,y.pendingProps);case 24:Xm(y,ui,h.memoizedState.cache)}return fu(h,y,_)}function yB(h,y,_){if(h!==null)if(h.memoizedProps!==y.pendingProps)hi=!0;else{if(!Rj(h,_)&&(y.flags&128)===0)return hi=!1,lde(h,y,_);hi=(h.flags&131072)!==0}else hi=!1,Sr&&(y.flags&1048576)!==0&&Q5(y,ev,y.index);switch(y.lanes=0,y.tag){case 16:e:{var j=y.pendingProps;if(h=sf(y.elementType),y.type=h,typeof h=="function")UA(h)?(j=df(h,j),y.tag=1,y=pB(null,y,h,j,_)):(y.tag=0,y=Tj(null,y,h,j,_));else{if(h!=null){var V=h.$$typeof;if(V===P){y.tag=11,y=oB(null,y,h,j,_);break e}else if(V===T){y.tag=14,y=lB(null,y,h,j,_);break e}}throw y=R(h)||h,Error(r(306,y,""))}}return y;case 0:return Tj(h,y,y.type,y.pendingProps,_);case 1:return j=y.type,V=df(j,y.pendingProps),pB(h,y,j,V,_);case 3:e:{if(D(y,y.stateNode.containerInfo),h===null)throw Error(r(387));j=y.pendingProps;var Z=y.memoizedState;V=Z.element,tj(h,y),lv(y,j,null,_);var Ne=y.memoizedState;if(j=Ne.cache,Xm(y,ui,j),j!==Z.cache&&XA(y,[ui],_,!0),ov(),j=Ne.element,Z.isDehydrated)if(Z={element:j,isDehydrated:!1,cache:Ne.cache},y.updateQueue.baseState=Z,y.memoizedState=Z,y.flags&256){y=fB(h,y,j,_);break e}else if(j!==V){V=Al(Error(r(424)),y),tv(V),y=fB(h,y,j,_);break e}else for(h=y.stateNode.containerInfo,h.nodeType===9?h=h.body:h=h.nodeName==="HTML"?h.ownerDocument.body:h,xa=Fl(h.firstChild),cs=y,Sr=!0,Wm=null,El=!0,_=dU(y,null,j,_),y.child=_;_;)_.flags=_.flags&-3|4096,_=_.sibling;else{if(tf(),j===V){y=fu(h,y,_);break e}us(h,y,j,_)}y=y.child}return y;case 26:return S_(h,y),h===null?(_=j8(y.type,null,y.pendingProps,null))?y.memoizedState=_:Sr||(_=y.type,h=y.pendingProps,j=z_(B.current).createElement(_),j[jt]=y,j[Jt]=h,ms(j,_,h),nt(j),y.stateNode=j):y.memoizedState=j8(y.type,h.memoizedProps,y.pendingProps,h.memoizedState),null;case 27:return U(y),h===null&&Sr&&(j=y.stateNode=P8(y.type,y.pendingProps,B.current),cs=y,El=!0,V=xa,lh(y.type)?(pM=V,xa=Fl(j.firstChild)):xa=V),us(h,y,y.pendingProps.children,_),S_(h,y),h===null&&(y.flags|=4194304),y.child;case 5:return h===null&&Sr&&((V=j=xa)&&(j=Ode(j,y.type,y.pendingProps,El),j!==null?(y.stateNode=j,cs=y,xa=Fl(j.firstChild),El=!1,V=!0):V=!1),V||Km(y)),U(y),V=y.type,Z=y.pendingProps,Ne=h!==null?h.memoizedProps:null,j=Z.children,cM(V,Z)?j=null:Ne!==null&&cM(V,Ne)&&(y.flags|=32),y.memoizedState!==null&&(V=lj(h,y,Zce,null,null,_),Tv._currentValue=V),S_(h,y),us(h,y,j,_),y.child;case 6:return h===null&&Sr&&((h=_=xa)&&(_=zde(_,y.pendingProps,El),_!==null?(y.stateNode=_,cs=y,xa=null,h=!0):h=!1),h||Km(y)),null;case 13:return gB(h,y,_);case 4:return D(y,y.stateNode.containerInfo),j=y.pendingProps,h===null?y.child=lf(y,null,j,_):us(h,y,j,_),y.child;case 11:return oB(h,y,y.type,y.pendingProps,_);case 7:return us(h,y,y.pendingProps,_),y.child;case 8:return us(h,y,y.pendingProps.children,_),y.child;case 12:return us(h,y,y.pendingProps.children,_),y.child;case 10:return j=y.pendingProps,Xm(y,y.type,j.value),us(h,y,j.children,_),y.child;case 9:return V=y.type._context,j=y.pendingProps.children,rf(y),V=ds(V),j=j(V),y.flags|=1,us(h,y,j,_),y.child;case 14:return lB(h,y,y.type,y.pendingProps,_);case 15:return cB(h,y,y.type,y.pendingProps,_);case 19:return xB(h,y,_);case 31:return ode(h,y,_);case 22:return dB(h,y,_,y.pendingProps);case 24:return rf(y),j=ds(ui),h===null?(V=JA(),V===null&&(V=oa,Z=YA(),V.pooledCache=Z,Z.refCount++,Z!==null&&(V.pooledCacheLanes|=_),V=Z),y.memoizedState={parent:j,cache:V},ej(y),Xm(y,ui,V)):((h.lanes&_)!==0&&(tj(h,y),lv(y,null,null,_),ov()),V=h.memoizedState,Z=y.memoizedState,V.parent!==j?(V={parent:j,cache:j},y.memoizedState=V,y.lanes===0&&(y.memoizedState=y.updateQueue.baseState=V),Xm(y,ui,j)):(j=Z.cache,Xm(y,ui,j),j!==V.cache&&XA(y,[ui],_,!0))),us(h,y,y.pendingProps.children,_),y.child;case 29:throw y.pendingProps}throw Error(r(156,y.tag))}function gu(h){h.flags|=4}function Lj(h,y,_,j,V){if((y=(h.mode&32)!==0)&&(y=!1),y){if(h.flags|=16777216,(V&335544128)===V)if(h.stateNode.complete)h.flags|=8192;else if(GB())h.flags|=8192;else throw of=o_,ZA}else h.flags&=-16777217}function vB(h,y){if(y.type!=="stylesheet"||(y.state.loading&4)!==0)h.flags&=-16777217;else if(h.flags|=16777216,!R8(y))if(GB())h.flags|=8192;else throw of=o_,ZA}function k_(h,y){y!==null&&(h.flags|=4),h.flags&16384&&(y=h.tag!==22?st():536870912,h.lanes|=y,vb|=y)}function pv(h,y){if(!Sr)switch(h.tailMode){case"hidden":y=h.tail;for(var _=null;y!==null;)y.alternate!==null&&(_=y),y=y.sibling;_===null?h.tail=null:_.sibling=null;break;case"collapsed":_=h.tail;for(var j=null;_!==null;)_.alternate!==null&&(j=_),_=_.sibling;j===null?y||h.tail===null?h.tail=null:h.tail.sibling=null:j.sibling=null}}function ya(h){var y=h.alternate!==null&&h.alternate.child===h.child,_=0,j=0;if(y)for(var V=h.child;V!==null;)_|=V.lanes|V.childLanes,j|=V.subtreeFlags&65011712,j|=V.flags&65011712,V.return=h,V=V.sibling;else for(V=h.child;V!==null;)_|=V.lanes|V.childLanes,j|=V.subtreeFlags,j|=V.flags,V.return=h,V=V.sibling;return h.subtreeFlags|=j,h.childLanes=_,y}function cde(h,y,_){var j=y.pendingProps;switch($A(y),y.tag){case 16:case 15:case 0:case 11:case 7:case 8:case 12:case 9:case 14:return ya(y),null;case 1:return ya(y),null;case 3:return _=y.stateNode,j=null,h!==null&&(j=h.memoizedState.cache),y.memoizedState.cache!==j&&(y.flags|=2048),mu(ui),M(),_.pendingContext&&(_.context=_.pendingContext,_.pendingContext=null),(h===null||h.child===null)&&(ob(y)?gu(y):h===null||h.memoizedState.isDehydrated&&(y.flags&256)===0||(y.flags|=1024,GA())),ya(y),null;case 26:var V=y.type,Z=y.memoizedState;return h===null?(gu(y),Z!==null?(ya(y),vB(y,Z)):(ya(y),Lj(y,V,null,j,_))):Z?Z!==h.memoizedState?(gu(y),ya(y),vB(y,Z)):(ya(y),y.flags&=-16777217):(h=h.memoizedProps,h!==j&&gu(y),ya(y),Lj(y,V,h,j,_)),null;case 27:if(Q(y),_=B.current,V=y.type,h!==null&&y.stateNode!=null)h.memoizedProps!==j&&gu(y);else{if(!j){if(y.stateNode===null)throw Error(r(166));return ya(y),null}h=be.current,ob(y)?Z5(y):(h=P8(V,j,_),y.stateNode=h,gu(y))}return ya(y),null;case 5:if(Q(y),V=y.type,h!==null&&y.stateNode!=null)h.memoizedProps!==j&&gu(y);else{if(!j){if(y.stateNode===null)throw Error(r(166));return ya(y),null}if(Z=be.current,ob(y))Z5(y);else{var Ne=z_(B.current);switch(Z){case 1:Z=Ne.createElementNS("http://www.w3.org/2000/svg",V);break;case 2:Z=Ne.createElementNS("http://www.w3.org/1998/Math/MathML",V);break;default:switch(V){case"svg":Z=Ne.createElementNS("http://www.w3.org/2000/svg",V);break;case"math":Z=Ne.createElementNS("http://www.w3.org/1998/Math/MathML",V);break;case"script":Z=Ne.createElement("div"),Z.innerHTML="<script><\/script>",Z=Z.removeChild(Z.firstChild);break;case"select":Z=typeof j.is=="string"?Ne.createElement("select",{is:j.is}):Ne.createElement("select"),j.multiple?Z.multiple=!0:j.size&&(Z.size=j.size);break;default:Z=typeof j.is=="string"?Ne.createElement(V,{is:j.is}):Ne.createElement(V)}}Z[jt]=y,Z[Jt]=j;e:for(Ne=y.child;Ne!==null;){if(Ne.tag===5||Ne.tag===6)Z.appendChild(Ne.stateNode);else if(Ne.tag!==4&&Ne.tag!==27&&Ne.child!==null){Ne.child.return=Ne,Ne=Ne.child;continue}if(Ne===y)break e;for(;Ne.sibling===null;){if(Ne.return===null||Ne.return===y)break e;Ne=Ne.return}Ne.sibling.return=Ne.return,Ne=Ne.sibling}y.stateNode=Z;e:switch(ms(Z,V,j),V){case"button":case"input":case"select":case"textarea":j=!!j.autoFocus;break e;case"img":j=!0;break e;default:j=!1}j&&gu(y)}}return ya(y),Lj(y,y.type,h===null?null:h.memoizedProps,y.pendingProps,_),null;case 6:if(h&&y.stateNode!=null)h.memoizedProps!==j&&gu(y);else{if(typeof j!="string"&&y.stateNode===null)throw Error(r(166));if(h=B.current,ob(y)){if(h=y.stateNode,_=y.memoizedProps,j=null,V=cs,V!==null)switch(V.tag){case 27:case 5:j=V.memoizedProps}h[jt]=y,h=!!(h.nodeValue===_||j!==null&&j.suppressHydrationWarning===!0||g8(h.nodeValue,_)),h||Km(y,!0)}else h=z_(h).createTextNode(j),h[jt]=y,y.stateNode=h}return ya(y),null;case 31:if(_=y.memoizedState,h===null||h.memoizedState!==null){if(j=ob(y),_!==null){if(h===null){if(!j)throw Error(r(318));if(h=y.memoizedState,h=h!==null?h.dehydrated:null,!h)throw Error(r(557));h[jt]=y}else tf(),(y.flags&128)===0&&(y.memoizedState=null),y.flags|=4;ya(y),h=!1}else _=GA(),h!==null&&h.memoizedState!==null&&(h.memoizedState.hydrationErrors=_),h=!0;if(!h)return y.flags&256?(Yo(y),y):(Yo(y),null);if((y.flags&128)!==0)throw Error(r(558))}return ya(y),null;case 13:if(j=y.memoizedState,h===null||h.memoizedState!==null&&h.memoizedState.dehydrated!==null){if(V=ob(y),j!==null&&j.dehydrated!==null){if(h===null){if(!V)throw Error(r(318));if(V=y.memoizedState,V=V!==null?V.dehydrated:null,!V)throw Error(r(317));V[jt]=y}else tf(),(y.flags&128)===0&&(y.memoizedState=null),y.flags|=4;ya(y),V=!1}else V=GA(),h!==null&&h.memoizedState!==null&&(h.memoizedState.hydrationErrors=V),V=!0;if(!V)return y.flags&256?(Yo(y),y):(Yo(y),null)}return Yo(y),(y.flags&128)!==0?(y.lanes=_,y):(_=j!==null,h=h!==null&&h.memoizedState!==null,_&&(j=y.child,V=null,j.alternate!==null&&j.alternate.memoizedState!==null&&j.alternate.memoizedState.cachePool!==null&&(V=j.alternate.memoizedState.cachePool.pool),Z=null,j.memoizedState!==null&&j.memoizedState.cachePool!==null&&(Z=j.memoizedState.cachePool.pool),Z!==V&&(j.flags|=2048)),_!==h&&_&&(y.child.flags|=8192),k_(y,y.updateQueue),ya(y),null);case 4:return M(),h===null&&aM(y.stateNode.containerInfo),ya(y),null;case 10:return mu(y.type),ya(y),null;case 19:if(ae(ai),j=y.memoizedState,j===null)return ya(y),null;if(V=(y.flags&128)!==0,Z=j.rendering,Z===null)if(V)pv(j,!1);else{if(Va!==0||h!==null&&(h.flags&128)!==0)for(h=y.child;h!==null;){if(Z=u_(h),Z!==null){for(y.flags|=128,pv(j,!1),h=Z.updateQueue,y.updateQueue=h,k_(y,h),y.subtreeFlags=0,h=_,_=y.child;_!==null;)K5(_,h),_=_.sibling;return pe(ai,ai.current&1|2),Sr&&du(y,j.treeForkCount),y.child}h=h.sibling}j.tail!==null&&L()>A_&&(y.flags|=128,V=!0,pv(j,!1),y.lanes=4194304)}else{if(!V)if(h=u_(Z),h!==null){if(y.flags|=128,V=!0,h=h.updateQueue,y.updateQueue=h,k_(y,h),pv(j,!0),j.tail===null&&j.tailMode==="hidden"&&!Z.alternate&&!Sr)return ya(y),null}else 2*L()-j.renderingStartTime>A_&&_!==536870912&&(y.flags|=128,V=!0,pv(j,!1),y.lanes=4194304);j.isBackwards?(Z.sibling=y.child,y.child=Z):(h=j.last,h!==null?h.sibling=Z:y.child=Z,j.last=Z)}return j.tail!==null?(h=j.tail,j.rendering=h,j.tail=h.sibling,j.renderingStartTime=L(),h.sibling=null,_=ai.current,pe(ai,V?_&1|2:_&1),Sr&&du(y,j.treeForkCount),h):(ya(y),null);case 22:case 23:return Yo(y),ij(),j=y.memoizedState!==null,h!==null?h.memoizedState!==null!==j&&(y.flags|=8192):j&&(y.flags|=8192),j?(_&536870912)!==0&&(y.flags&128)===0&&(ya(y),y.subtreeFlags&6&&(y.flags|=8192)):ya(y),_=y.updateQueue,_!==null&&k_(y,_.retryQueue),_=null,h!==null&&h.memoizedState!==null&&h.memoizedState.cachePool!==null&&(_=h.memoizedState.cachePool.pool),j=null,y.memoizedState!==null&&y.memoizedState.cachePool!==null&&(j=y.memoizedState.cachePool.pool),j!==_&&(y.flags|=2048),h!==null&&ae(af),null;case 24:return _=null,h!==null&&(_=h.memoizedState.cache),y.memoizedState.cache!==_&&(y.flags|=2048),mu(ui),ya(y),null;case 25:return null;case 30:return null}throw Error(r(156,y.tag))}function dde(h,y){switch($A(y),y.tag){case 1:return h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 3:return mu(ui),M(),h=y.flags,(h&65536)!==0&&(h&128)===0?(y.flags=h&-65537|128,y):null;case 26:case 27:case 5:return Q(y),null;case 31:if(y.memoizedState!==null){if(Yo(y),y.alternate===null)throw Error(r(340));tf()}return h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 13:if(Yo(y),h=y.memoizedState,h!==null&&h.dehydrated!==null){if(y.alternate===null)throw Error(r(340));tf()}return h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 19:return ae(ai),null;case 4:return M(),null;case 10:return mu(y.type),null;case 22:case 23:return Yo(y),ij(),h!==null&&ae(af),h=y.flags,h&65536?(y.flags=h&-65537|128,y):null;case 24:return mu(ui),null;case 25:return null;default:return null}}function wB(h,y){switch($A(y),y.tag){case 3:mu(ui),M();break;case 26:case 27:case 5:Q(y);break;case 4:M();break;case 31:y.memoizedState!==null&&Yo(y);break;case 13:Yo(y);break;case 19:ae(ai);break;case 10:mu(y.type);break;case 22:case 23:Yo(y),ij(),h!==null&&ae(af);break;case 24:mu(ui)}}function fv(h,y){try{var _=y.updateQueue,j=_!==null?_.lastEffect:null;if(j!==null){var V=j.next;_=V;do{if((_.tag&h)===h){j=void 0;var Z=_.create,Ne=_.inst;j=Z(),Ne.destroy=j}_=_.next}while(_!==V)}}catch(qe){$r(y,y.return,qe)}}function th(h,y,_){try{var j=y.updateQueue,V=j!==null?j.lastEffect:null;if(V!==null){var Z=V.next;j=Z;do{if((j.tag&h)===h){var Ne=j.inst,qe=Ne.destroy;if(qe!==void 0){Ne.destroy=void 0,V=y;var lt=_,vt=qe;try{vt()}catch(Rt){$r(V,lt,Rt)}}}j=j.next}while(j!==Z)}}catch(Rt){$r(y,y.return,Rt)}}function SB(h){var y=h.updateQueue;if(y!==null){var _=h.stateNode;try{mU(y,_)}catch(j){$r(h,h.return,j)}}}function _B(h,y,_){_.props=df(h.type,h.memoizedProps),_.state=h.memoizedState;try{_.componentWillUnmount()}catch(j){$r(h,y,j)}}function gv(h,y){try{var _=h.ref;if(_!==null){switch(h.tag){case 26:case 27:case 5:var j=h.stateNode;break;case 30:j=h.stateNode;break;default:j=h.stateNode}typeof _=="function"?h.refCleanup=_(j):_.current=j}}catch(V){$r(h,y,V)}}function dd(h,y){var _=h.ref,j=h.refCleanup;if(_!==null)if(typeof j=="function")try{j()}catch(V){$r(h,y,V)}finally{h.refCleanup=null,h=h.alternate,h!=null&&(h.refCleanup=null)}else if(typeof _=="function")try{_(null)}catch(V){$r(h,y,V)}else _.current=null}function kB(h){var y=h.type,_=h.memoizedProps,j=h.stateNode;try{e:switch(y){case"button":case"input":case"select":case"textarea":_.autoFocus&&j.focus();break e;case"img":_.src?j.src=_.src:_.srcSet&&(j.srcset=_.srcSet)}}catch(V){$r(h,h.return,V)}}function Ij(h,y,_){try{var j=h.stateNode;Ede(j,h.type,_,y),j[Jt]=y}catch(V){$r(h,h.return,V)}}function NB(h){return h.tag===5||h.tag===3||h.tag===26||h.tag===27&&lh(h.type)||h.tag===4}function Oj(h){e:for(;;){for(;h.sibling===null;){if(h.return===null||NB(h.return))return null;h=h.return}for(h.sibling.return=h.return,h=h.sibling;h.tag!==5&&h.tag!==6&&h.tag!==18;){if(h.tag===27&&lh(h.type)||h.flags&2||h.child===null||h.tag===4)continue e;h.child.return=h,h=h.child}if(!(h.flags&2))return h.stateNode}}function zj(h,y,_){var j=h.tag;if(j===5||j===6)h=h.stateNode,y?(_.nodeType===9?_.body:_.nodeName==="HTML"?_.ownerDocument.body:_).insertBefore(h,y):(y=_.nodeType===9?_.body:_.nodeName==="HTML"?_.ownerDocument.body:_,y.appendChild(h),_=_._reactRootContainer,_!=null||y.onclick!==null||(y.onclick=Wt));else if(j!==4&&(j===27&&lh(h.type)&&(_=h.stateNode,y=null),h=h.child,h!==null))for(zj(h,y,_),h=h.sibling;h!==null;)zj(h,y,_),h=h.sibling}function N_(h,y,_){var j=h.tag;if(j===5||j===6)h=h.stateNode,y?_.insertBefore(h,y):_.appendChild(h);else if(j!==4&&(j===27&&lh(h.type)&&(_=h.stateNode),h=h.child,h!==null))for(N_(h,y,_),h=h.sibling;h!==null;)N_(h,y,_),h=h.sibling}function CB(h){var y=h.stateNode,_=h.memoizedProps;try{for(var j=h.type,V=y.attributes;V.length;)y.removeAttributeNode(V[0]);ms(y,j,_),y[jt]=h,y[Jt]=_}catch(Z){$r(h,h.return,Z)}}var bu=!1,pi=!1,Uj=!1,PB=typeof WeakSet=="function"?WeakSet:Set,Hi=null;function ude(h,y){if(h=h.containerInfo,oM=G_,h=YS(h),DA(h)){if("selectionStart"in h)var _={start:h.selectionStart,end:h.selectionEnd};else e:{_=(_=h.ownerDocument)&&_.defaultView||window;var j=_.getSelection&&_.getSelection();if(j&&j.rangeCount!==0){_=j.anchorNode;var V=j.anchorOffset,Z=j.focusNode;j=j.focusOffset;try{_.nodeType,Z.nodeType}catch{_=null;break e}var Ne=0,qe=-1,lt=-1,vt=0,Rt=0,Ut=h,kt=null;t:for(;;){for(var At;Ut!==_||V!==0&&Ut.nodeType!==3||(qe=Ne+V),Ut!==Z||j!==0&&Ut.nodeType!==3||(lt=Ne+j),Ut.nodeType===3&&(Ne+=Ut.nodeValue.length),(At=Ut.firstChild)!==null;)kt=Ut,Ut=At;for(;;){if(Ut===h)break t;if(kt===_&&++vt===V&&(qe=Ne),kt===Z&&++Rt===j&&(lt=Ne),(At=Ut.nextSibling)!==null)break;Ut=kt,kt=Ut.parentNode}Ut=At}_=qe===-1||lt===-1?null:{start:qe,end:lt}}else _=null}_=_||{start:0,end:0}}else _=null;for(lM={focusedElem:h,selectionRange:_},G_=!1,Hi=y;Hi!==null;)if(y=Hi,h=y.child,(y.subtreeFlags&1028)!==0&&h!==null)h.return=y,Hi=h;else for(;Hi!==null;){switch(y=Hi,Z=y.alternate,h=y.flags,y.tag){case 0:if((h&4)!==0&&(h=y.updateQueue,h=h!==null?h.events:null,h!==null))for(_=0;_<h.length;_++)V=h[_],V.ref.impl=V.nextImpl;break;case 11:case 15:break;case 1:if((h&1024)!==0&&Z!==null){h=void 0,_=y,V=Z.memoizedProps,Z=Z.memoizedState,j=_.stateNode;try{var bn=df(_.type,V);h=j.getSnapshotBeforeUpdate(bn,Z),j.__reactInternalSnapshotBeforeUpdate=h}catch(In){$r(_,_.return,In)}}break;case 3:if((h&1024)!==0){if(h=y.stateNode.containerInfo,_=h.nodeType,_===9)uM(h);else if(_===1)switch(h.nodeName){case"HEAD":case"HTML":case"BODY":uM(h);break;default:h.textContent=""}}break;case 5:case 26:case 27:case 6:case 4:case 17:break;default:if((h&1024)!==0)throw Error(r(163))}if(h=y.sibling,h!==null){h.return=y.return,Hi=h;break}Hi=y.return}}function TB(h,y,_){var j=_.flags;switch(_.tag){case 0:case 11:case 15:yu(h,_),j&4&&fv(5,_);break;case 1:if(yu(h,_),j&4)if(h=_.stateNode,y===null)try{h.componentDidMount()}catch(Ne){$r(_,_.return,Ne)}else{var V=df(_.type,y.memoizedProps);y=y.memoizedState;try{h.componentDidUpdate(V,y,h.__reactInternalSnapshotBeforeUpdate)}catch(Ne){$r(_,_.return,Ne)}}j&64&&SB(_),j&512&&gv(_,_.return);break;case 3:if(yu(h,_),j&64&&(h=_.updateQueue,h!==null)){if(y=null,_.child!==null)switch(_.child.tag){case 27:case 5:y=_.child.stateNode;break;case 1:y=_.child.stateNode}try{mU(h,y)}catch(Ne){$r(_,_.return,Ne)}}break;case 27:y===null&&j&4&&CB(_);case 26:case 5:yu(h,_),y===null&&j&4&&kB(_),j&512&&gv(_,_.return);break;case 12:yu(h,_);break;case 31:yu(h,_),j&4&&MB(h,_);break;case 13:yu(h,_),j&4&&EB(h,_),j&64&&(h=_.memoizedState,h!==null&&(h=h.dehydrated,h!==null&&(_=vde.bind(null,_),Ude(h,_))));break;case 22:if(j=_.memoizedState!==null||bu,!j){y=y!==null&&y.memoizedState!==null||pi,V=bu;var Z=pi;bu=j,(pi=y)&&!Z?vu(h,_,(_.subtreeFlags&8772)!==0):yu(h,_),bu=V,pi=Z}break;case 30:break;default:yu(h,_)}}function AB(h){var y=h.alternate;y!==null&&(h.alternate=null,AB(y)),h.child=null,h.deletions=null,h.sibling=null,h.tag===5&&(y=h.stateNode,y!==null&&Le(y)),h.stateNode=null,h.return=null,h.dependencies=null,h.memoizedProps=null,h.memoizedState=null,h.pendingProps=null,h.stateNode=null,h.updateQueue=null}var Ca=null,ko=!1;function xu(h,y,_){for(_=_.child;_!==null;)jB(h,y,_),_=_.sibling}function jB(h,y,_){if(ze&&typeof ze.onCommitFiberUnmount=="function")try{ze.onCommitFiberUnmount(Ce,_)}catch{}switch(_.tag){case 26:pi||dd(_,y),xu(h,y,_),_.memoizedState?_.memoizedState.count--:_.stateNode&&(_=_.stateNode,_.parentNode.removeChild(_));break;case 27:pi||dd(_,y);var j=Ca,V=ko;lh(_.type)&&(Ca=_.stateNode,ko=!1),xu(h,y,_),Nv(_.stateNode),Ca=j,ko=V;break;case 5:pi||dd(_,y);case 6:if(j=Ca,V=ko,Ca=null,xu(h,y,_),Ca=j,ko=V,Ca!==null)if(ko)try{(Ca.nodeType===9?Ca.body:Ca.nodeName==="HTML"?Ca.ownerDocument.body:Ca).removeChild(_.stateNode)}catch(Z){$r(_,y,Z)}else try{Ca.removeChild(_.stateNode)}catch(Z){$r(_,y,Z)}break;case 18:Ca!==null&&(ko?(h=Ca,S8(h.nodeType===9?h.body:h.nodeName==="HTML"?h.ownerDocument.body:h,_.stateNode),Tb(h)):S8(Ca,_.stateNode));break;case 4:j=Ca,V=ko,Ca=_.stateNode.containerInfo,ko=!0,xu(h,y,_),Ca=j,ko=V;break;case 0:case 11:case 14:case 15:th(2,_,y),pi||th(4,_,y),xu(h,y,_);break;case 1:pi||(dd(_,y),j=_.stateNode,typeof j.componentWillUnmount=="function"&&_B(_,y,j)),xu(h,y,_);break;case 21:xu(h,y,_);break;case 22:pi=(j=pi)||_.memoizedState!==null,xu(h,y,_),pi=j;break;default:xu(h,y,_)}}function MB(h,y){if(y.memoizedState===null&&(h=y.alternate,h!==null&&(h=h.memoizedState,h!==null))){h=h.dehydrated;try{Tb(h)}catch(_){$r(y,y.return,_)}}}function EB(h,y){if(y.memoizedState===null&&(h=y.alternate,h!==null&&(h=h.memoizedState,h!==null&&(h=h.dehydrated,h!==null))))try{Tb(h)}catch(_){$r(y,y.return,_)}}function mde(h){switch(h.tag){case 31:case 13:case 19:var y=h.stateNode;return y===null&&(y=h.stateNode=new PB),y;case 22:return h=h.stateNode,y=h._retryCache,y===null&&(y=h._retryCache=new PB),y;default:throw Error(r(435,h.tag))}}function C_(h,y){var _=mde(h);y.forEach(function(j){if(!_.has(j)){_.add(j);var V=wde.bind(null,h,j);j.then(V,V)}})}function No(h,y){var _=y.deletions;if(_!==null)for(var j=0;j<_.length;j++){var V=_[j],Z=h,Ne=y,qe=Ne;e:for(;qe!==null;){switch(qe.tag){case 27:if(lh(qe.type)){Ca=qe.stateNode,ko=!1;break e}break;case 5:Ca=qe.stateNode,ko=!1;break e;case 3:case 4:Ca=qe.stateNode.containerInfo,ko=!0;break e}qe=qe.return}if(Ca===null)throw Error(r(160));jB(Z,Ne,V),Ca=null,ko=!1,Z=V.alternate,Z!==null&&(Z.return=null),V.return=null}if(y.subtreeFlags&13886)for(y=y.child;y!==null;)DB(y,h),y=y.sibling}var Nc=null;function DB(h,y){var _=h.alternate,j=h.flags;switch(h.tag){case 0:case 11:case 14:case 15:No(y,h),Co(h),j&4&&(th(3,h,h.return),fv(3,h),th(5,h,h.return));break;case 1:No(y,h),Co(h),j&512&&(pi||_===null||dd(_,_.return)),j&64&&bu&&(h=h.updateQueue,h!==null&&(j=h.callbacks,j!==null&&(_=h.shared.hiddenCallbacks,h.shared.hiddenCallbacks=_===null?j:_.concat(j))));break;case 26:var V=Nc;if(No(y,h),Co(h),j&512&&(pi||_===null||dd(_,_.return)),j&4){var Z=_!==null?_.memoizedState:null;if(j=h.memoizedState,_===null)if(j===null)if(h.stateNode===null){e:{j=h.type,_=h.memoizedProps,V=V.ownerDocument||V;t:switch(j){case"title":Z=V.getElementsByTagName("title")[0],(!Z||Z[Ze]||Z[jt]||Z.namespaceURI==="http://www.w3.org/2000/svg"||Z.hasAttribute("itemprop"))&&(Z=V.createElement(j),V.head.insertBefore(Z,V.querySelector("head > title"))),ms(Z,j,_),Z[jt]=h,nt(Z),j=Z;break e;case"link":var Ne=D8("link","href",V).get(j+(_.href||""));if(Ne){for(var qe=0;qe<Ne.length;qe++)if(Z=Ne[qe],Z.getAttribute("href")===(_.href==null||_.href===""?null:_.href)&&Z.getAttribute("rel")===(_.rel==null?null:_.rel)&&Z.getAttribute("title")===(_.title==null?null:_.title)&&Z.getAttribute("crossorigin")===(_.crossOrigin==null?null:_.crossOrigin)){Ne.splice(qe,1);break t}}Z=V.createElement(j),ms(Z,j,_),V.head.appendChild(Z);break;case"meta":if(Ne=D8("meta","content",V).get(j+(_.content||""))){for(qe=0;qe<Ne.length;qe++)if(Z=Ne[qe],Z.getAttribute("content")===(_.content==null?null:""+_.content)&&Z.getAttribute("name")===(_.name==null?null:_.name)&&Z.getAttribute("property")===(_.property==null?null:_.property)&&Z.getAttribute("http-equiv")===(_.httpEquiv==null?null:_.httpEquiv)&&Z.getAttribute("charset")===(_.charSet==null?null:_.charSet)){Ne.splice(qe,1);break t}}Z=V.createElement(j),ms(Z,j,_),V.head.appendChild(Z);break;default:throw Error(r(468,j))}Z[jt]=h,nt(Z),j=Z}h.stateNode=j}else F8(V,h.type,h.stateNode);else h.stateNode=E8(V,j,h.memoizedProps);else Z!==j?(Z===null?_.stateNode!==null&&(_=_.stateNode,_.parentNode.removeChild(_)):Z.count--,j===null?F8(V,h.type,h.stateNode):E8(V,j,h.memoizedProps)):j===null&&h.stateNode!==null&&Ij(h,h.memoizedProps,_.memoizedProps)}break;case 27:No(y,h),Co(h),j&512&&(pi||_===null||dd(_,_.return)),_!==null&&j&4&&Ij(h,h.memoizedProps,_.memoizedProps);break;case 5:if(No(y,h),Co(h),j&512&&(pi||_===null||dd(_,_.return)),h.flags&32){V=h.stateNode;try{or(V,"")}catch(bn){$r(h,h.return,bn)}}j&4&&h.stateNode!=null&&(V=h.memoizedProps,Ij(h,V,_!==null?_.memoizedProps:V)),j&1024&&(Uj=!0);break;case 6:if(No(y,h),Co(h),j&4){if(h.stateNode===null)throw Error(r(162));j=h.memoizedProps,_=h.stateNode;try{_.nodeValue=j}catch(bn){$r(h,h.return,bn)}}break;case 3:if(H_=null,V=Nc,Nc=U_(y.containerInfo),No(y,h),Nc=V,Co(h),j&4&&_!==null&&_.memoizedState.isDehydrated)try{Tb(y.containerInfo)}catch(bn){$r(h,h.return,bn)}Uj&&(Uj=!1,FB(h));break;case 4:j=Nc,Nc=U_(h.stateNode.containerInfo),No(y,h),Co(h),Nc=j;break;case 12:No(y,h),Co(h);break;case 31:No(y,h),Co(h),j&4&&(j=h.updateQueue,j!==null&&(h.updateQueue=null,C_(h,j)));break;case 13:No(y,h),Co(h),h.child.flags&8192&&h.memoizedState!==null!=(_!==null&&_.memoizedState!==null)&&(T_=L()),j&4&&(j=h.updateQueue,j!==null&&(h.updateQueue=null,C_(h,j)));break;case 22:V=h.memoizedState!==null;var lt=_!==null&&_.memoizedState!==null,vt=bu,Rt=pi;if(bu=vt||V,pi=Rt||lt,No(y,h),pi=Rt,bu=vt,Co(h),j&8192)e:for(y=h.stateNode,y._visibility=V?y._visibility&-2:y._visibility|1,V&&(_===null||lt||bu||pi||uf(h)),_=null,y=h;;){if(y.tag===5||y.tag===26){if(_===null){lt=_=y;try{if(Z=lt.stateNode,V)Ne=Z.style,typeof Ne.setProperty=="function"?Ne.setProperty("display","none","important"):Ne.display="none";else{qe=lt.stateNode;var Ut=lt.memoizedProps.style,kt=Ut!=null&&Ut.hasOwnProperty("display")?Ut.display:null;qe.style.display=kt==null||typeof kt=="boolean"?"":(""+kt).trim()}}catch(bn){$r(lt,lt.return,bn)}}}else if(y.tag===6){if(_===null){lt=y;try{lt.stateNode.nodeValue=V?"":lt.memoizedProps}catch(bn){$r(lt,lt.return,bn)}}}else if(y.tag===18){if(_===null){lt=y;try{var At=lt.stateNode;V?_8(At,!0):_8(lt.stateNode,!1)}catch(bn){$r(lt,lt.return,bn)}}}else if((y.tag!==22&&y.tag!==23||y.memoizedState===null||y===h)&&y.child!==null){y.child.return=y,y=y.child;continue}if(y===h)break e;for(;y.sibling===null;){if(y.return===null||y.return===h)break e;_===y&&(_=null),y=y.return}_===y&&(_=null),y.sibling.return=y.return,y=y.sibling}j&4&&(j=h.updateQueue,j!==null&&(_=j.retryQueue,_!==null&&(j.retryQueue=null,C_(h,_))));break;case 19:No(y,h),Co(h),j&4&&(j=h.updateQueue,j!==null&&(h.updateQueue=null,C_(h,j)));break;case 30:break;case 21:break;default:No(y,h),Co(h)}}function Co(h){var y=h.flags;if(y&2){try{for(var _,j=h.return;j!==null;){if(NB(j)){_=j;break}j=j.return}if(_==null)throw Error(r(160));switch(_.tag){case 27:var V=_.stateNode,Z=Oj(h);N_(h,Z,V);break;case 5:var Ne=_.stateNode;_.flags&32&&(or(Ne,""),_.flags&=-33);var qe=Oj(h);N_(h,qe,Ne);break;case 3:case 4:var lt=_.stateNode.containerInfo,vt=Oj(h);zj(h,vt,lt);break;default:throw Error(r(161))}}catch(Rt){$r(h,h.return,Rt)}h.flags&=-3}y&4096&&(h.flags&=-4097)}function FB(h){if(h.subtreeFlags&1024)for(h=h.child;h!==null;){var y=h;FB(y),y.tag===5&&y.flags&1024&&y.stateNode.reset(),h=h.sibling}}function yu(h,y){if(y.subtreeFlags&8772)for(y=y.child;y!==null;)TB(h,y.alternate,y),y=y.sibling}function uf(h){for(h=h.child;h!==null;){var y=h;switch(y.tag){case 0:case 11:case 14:case 15:th(4,y,y.return),uf(y);break;case 1:dd(y,y.return);var _=y.stateNode;typeof _.componentWillUnmount=="function"&&_B(y,y.return,_),uf(y);break;case 27:Nv(y.stateNode);case 26:case 5:dd(y,y.return),uf(y);break;case 22:y.memoizedState===null&&uf(y);break;case 30:uf(y);break;default:uf(y)}h=h.sibling}}function vu(h,y,_){for(_=_&&(y.subtreeFlags&8772)!==0,y=y.child;y!==null;){var j=y.alternate,V=h,Z=y,Ne=Z.flags;switch(Z.tag){case 0:case 11:case 15:vu(V,Z,_),fv(4,Z);break;case 1:if(vu(V,Z,_),j=Z,V=j.stateNode,typeof V.componentDidMount=="function")try{V.componentDidMount()}catch(vt){$r(j,j.return,vt)}if(j=Z,V=j.updateQueue,V!==null){var qe=j.stateNode;try{var lt=V.shared.hiddenCallbacks;if(lt!==null)for(V.shared.hiddenCallbacks=null,V=0;V<lt.length;V++)uU(lt[V],qe)}catch(vt){$r(j,j.return,vt)}}_&&Ne&64&&SB(Z),gv(Z,Z.return);break;case 27:CB(Z);case 26:case 5:vu(V,Z,_),_&&j===null&&Ne&4&&kB(Z),gv(Z,Z.return);break;case 12:vu(V,Z,_);break;case 31:vu(V,Z,_),_&&Ne&4&&MB(V,Z);break;case 13:vu(V,Z,_),_&&Ne&4&&EB(V,Z);break;case 22:Z.memoizedState===null&&vu(V,Z,_),gv(Z,Z.return);break;case 30:break;default:vu(V,Z,_)}y=y.sibling}}function Bj(h,y){var _=null;h!==null&&h.memoizedState!==null&&h.memoizedState.cachePool!==null&&(_=h.memoizedState.cachePool.pool),h=null,y.memoizedState!==null&&y.memoizedState.cachePool!==null&&(h=y.memoizedState.cachePool.pool),h!==_&&(h!=null&&h.refCount++,_!=null&&nv(_))}function Hj(h,y){h=null,y.alternate!==null&&(h=y.alternate.memoizedState.cache),y=y.memoizedState.cache,y!==h&&(y.refCount++,h!=null&&nv(h))}function Cc(h,y,_,j){if(y.subtreeFlags&10256)for(y=y.child;y!==null;)RB(h,y,_,j),y=y.sibling}function RB(h,y,_,j){var V=y.flags;switch(y.tag){case 0:case 11:case 15:Cc(h,y,_,j),V&2048&&fv(9,y);break;case 1:Cc(h,y,_,j);break;case 3:Cc(h,y,_,j),V&2048&&(h=null,y.alternate!==null&&(h=y.alternate.memoizedState.cache),y=y.memoizedState.cache,y!==h&&(y.refCount++,h!=null&&nv(h)));break;case 12:if(V&2048){Cc(h,y,_,j),h=y.stateNode;try{var Z=y.memoizedProps,Ne=Z.id,qe=Z.onPostCommit;typeof qe=="function"&&qe(Ne,y.alternate===null?"mount":"update",h.passiveEffectDuration,-0)}catch(lt){$r(y,y.return,lt)}}else Cc(h,y,_,j);break;case 31:Cc(h,y,_,j);break;case 13:Cc(h,y,_,j);break;case 23:break;case 22:Z=y.stateNode,Ne=y.alternate,y.memoizedState!==null?Z._visibility&2?Cc(h,y,_,j):bv(h,y):Z._visibility&2?Cc(h,y,_,j):(Z._visibility|=2,bb(h,y,_,j,(y.subtreeFlags&10256)!==0||!1)),V&2048&&Bj(Ne,y);break;case 24:Cc(h,y,_,j),V&2048&&Hj(y.alternate,y);break;default:Cc(h,y,_,j)}}function bb(h,y,_,j,V){for(V=V&&((y.subtreeFlags&10256)!==0||!1),y=y.child;y!==null;){var Z=h,Ne=y,qe=_,lt=j,vt=Ne.flags;switch(Ne.tag){case 0:case 11:case 15:bb(Z,Ne,qe,lt,V),fv(8,Ne);break;case 23:break;case 22:var Rt=Ne.stateNode;Ne.memoizedState!==null?Rt._visibility&2?bb(Z,Ne,qe,lt,V):bv(Z,Ne):(Rt._visibility|=2,bb(Z,Ne,qe,lt,V)),V&&vt&2048&&Bj(Ne.alternate,Ne);break;case 24:bb(Z,Ne,qe,lt,V),V&&vt&2048&&Hj(Ne.alternate,Ne);break;default:bb(Z,Ne,qe,lt,V)}y=y.sibling}}function bv(h,y){if(y.subtreeFlags&10256)for(y=y.child;y!==null;){var _=h,j=y,V=j.flags;switch(j.tag){case 22:bv(_,j),V&2048&&Bj(j.alternate,j);break;case 24:bv(_,j),V&2048&&Hj(j.alternate,j);break;default:bv(_,j)}y=y.sibling}}var xv=8192;function xb(h,y,_){if(h.subtreeFlags&xv)for(h=h.child;h!==null;)LB(h,y,_),h=h.sibling}function LB(h,y,_){switch(h.tag){case 26:xb(h,y,_),h.flags&xv&&h.memoizedState!==null&&Jde(_,Nc,h.memoizedState,h.memoizedProps);break;case 5:xb(h,y,_);break;case 3:case 4:var j=Nc;Nc=U_(h.stateNode.containerInfo),xb(h,y,_),Nc=j;break;case 22:h.memoizedState===null&&(j=h.alternate,j!==null&&j.memoizedState!==null?(j=xv,xv=16777216,xb(h,y,_),xv=j):xb(h,y,_));break;default:xb(h,y,_)}}function IB(h){var y=h.alternate;if(y!==null&&(h=y.child,h!==null)){y.child=null;do y=h.sibling,h.sibling=null,h=y;while(h!==null)}}function yv(h){var y=h.deletions;if((h.flags&16)!==0){if(y!==null)for(var _=0;_<y.length;_++){var j=y[_];Hi=j,zB(j,h)}IB(h)}if(h.subtreeFlags&10256)for(h=h.child;h!==null;)OB(h),h=h.sibling}function OB(h){switch(h.tag){case 0:case 11:case 15:yv(h),h.flags&2048&&th(9,h,h.return);break;case 3:yv(h);break;case 12:yv(h);break;case 22:var y=h.stateNode;h.memoizedState!==null&&y._visibility&2&&(h.return===null||h.return.tag!==13)?(y._visibility&=-3,P_(h)):yv(h);break;default:yv(h)}}function P_(h){var y=h.deletions;if((h.flags&16)!==0){if(y!==null)for(var _=0;_<y.length;_++){var j=y[_];Hi=j,zB(j,h)}IB(h)}for(h=h.child;h!==null;){switch(y=h,y.tag){case 0:case 11:case 15:th(8,y,y.return),P_(y);break;case 22:_=y.stateNode,_._visibility&2&&(_._visibility&=-3,P_(y));break;default:P_(y)}h=h.sibling}}function zB(h,y){for(;Hi!==null;){var _=Hi;switch(_.tag){case 0:case 11:case 15:th(8,_,y);break;case 23:case 22:if(_.memoizedState!==null&&_.memoizedState.cachePool!==null){var j=_.memoizedState.cachePool.pool;j!=null&&j.refCount++}break;case 24:nv(_.memoizedState.cache)}if(j=_.child,j!==null)j.return=_,Hi=j;else e:for(_=h;Hi!==null;){j=Hi;var V=j.sibling,Z=j.return;if(AB(j),j===_){Hi=null;break e}if(V!==null){V.return=Z,Hi=V;break e}Hi=Z}}}var hde={getCacheForType:function(h){var y=ds(ui),_=y.data.get(h);return _===void 0&&(_=h(),y.data.set(h,_)),_},cacheSignal:function(){return ds(ui).controller.signal}},pde=typeof WeakMap=="function"?WeakMap:Map,Ir=0,oa=null,hr=null,yr=0,qr=0,Qo=null,nh=!1,yb=!1,qj=!1,wu=0,Va=0,rh=0,mf=0,$j=0,Jo=0,vb=0,vv=null,Po=null,Vj=!1,T_=0,UB=0,A_=1/0,j_=null,ah=null,Ni=0,ih=null,wb=null,Su=0,Gj=0,Wj=null,BB=null,wv=0,Kj=null;function Zo(){return(Ir&2)!==0&&yr!==0?yr&-yr:re.T!==null?eM():an()}function HB(){if(Jo===0)if((yr&536870912)===0||Sr){var h=Pe;Pe<<=1,(Pe&3932160)===0&&(Pe=262144),Jo=h}else Jo=536870912;return h=Xo.current,h!==null&&(h.flags|=32),Jo}function To(h,y,_){(h===oa&&(qr===2||qr===9)||h.cancelPendingCommit!==null)&&(Sb(h,0),sh(h,yr,Jo,!1)),at(h,_),((Ir&2)===0||h!==oa)&&(h===oa&&((Ir&2)===0&&(mf|=_),Va===4&&sh(h,yr,Jo,!1)),ud(h))}function qB(h,y,_){if((Ir&6)!==0)throw Error(r(327));var j=!_&&(y&127)===0&&(y&h.expiredLanes)===0||Se(h,y),V=j?bde(h,y):Yj(h,y,!0),Z=j;do{if(V===0){yb&&!j&&sh(h,y,0,!1);break}else{if(_=h.current.alternate,Z&&!fde(_)){V=Yj(h,y,!1),Z=!1;continue}if(V===2){if(Z=y,h.errorRecoveryDisabledLanes&Z)var Ne=0;else Ne=h.pendingLanes&-536870913,Ne=Ne!==0?Ne:Ne&536870912?536870912:0;if(Ne!==0){y=Ne;e:{var qe=h;V=vv;var lt=qe.current.memoizedState.isDehydrated;if(lt&&(Sb(qe,Ne).flags|=256),Ne=Yj(qe,Ne,!1),Ne!==2){if(qj&&!lt){qe.errorRecoveryDisabledLanes|=Z,mf|=Z,V=4;break e}Z=Po,Po=V,Z!==null&&(Po===null?Po=Z:Po.push.apply(Po,Z))}V=Ne}if(Z=!1,V!==2)continue}}if(V===1){Sb(h,0),sh(h,y,0,!0);break}e:{switch(j=h,Z=V,Z){case 0:case 1:throw Error(r(345));case 4:if((y&4194048)!==y)break;case 6:sh(j,y,Jo,!nh);break e;case 2:Po=null;break;case 3:case 5:break;default:throw Error(r(329))}if((y&62914560)===y&&(V=T_+300-L(),10<V)){if(sh(j,y,Jo,!nh),de(j,0,!0)!==0)break e;Su=y,j.timeoutHandle=v8($B.bind(null,j,_,Po,j_,Vj,y,Jo,mf,vb,nh,Z,"Throttled",-0,0),V);break e}$B(j,_,Po,j_,Vj,y,Jo,mf,vb,nh,Z,null,-0,0)}}break}while(!0);ud(h)}function $B(h,y,_,j,V,Z,Ne,qe,lt,vt,Rt,Ut,kt,At){if(h.timeoutHandle=-1,Ut=y.subtreeFlags,Ut&8192||(Ut&16785408)===16785408){Ut={stylesheets:null,count:0,imgCount:0,imgBytes:0,suspenseyImages:[],waitingForImages:!0,waitingForViewTransition:!1,unsuspend:Wt},LB(y,Z,Ut);var bn=(Z&62914560)===Z?T_-L():(Z&4194048)===Z?UB-L():0;if(bn=Zde(Ut,bn),bn!==null){Su=Z,h.cancelPendingCommit=bn(JB.bind(null,h,y,Z,_,j,V,Ne,qe,lt,Rt,Ut,null,kt,At)),sh(h,Z,Ne,!vt);return}}JB(h,y,Z,_,j,V,Ne,qe,lt)}function fde(h){for(var y=h;;){var _=y.tag;if((_===0||_===11||_===15)&&y.flags&16384&&(_=y.updateQueue,_!==null&&(_=_.stores,_!==null)))for(var j=0;j<_.length;j++){var V=_[j],Z=V.getSnapshot;V=V.value;try{if(!_o(Z(),V))return!1}catch{return!1}}if(_=y.child,y.subtreeFlags&16384&&_!==null)_.return=y,y=_;else{if(y===h)break;for(;y.sibling===null;){if(y.return===null||y.return===h)return!0;y=y.return}y.sibling.return=y.return,y=y.sibling}}return!0}function sh(h,y,_,j){y&=~$j,y&=~mf,h.suspendedLanes|=y,h.pingedLanes&=~y,j&&(h.warmLanes|=y),j=h.expirationTimes;for(var V=y;0<V;){var Z=31-Oe(V),Ne=1<<Z;j[Z]=-1,V&=~Ne}_!==0&&Mt(h,_,y)}function M_(){return(Ir&6)===0?(Sv(0),!1):!0}function Xj(){if(hr!==null){if(qr===0)var h=hr.return;else h=hr,uu=nf=null,uj(h),mb=null,av=0,h=hr;for(;h!==null;)wB(h.alternate,h),h=h.return;hr=null}}function Sb(h,y){var _=h.timeoutHandle;_!==-1&&(h.timeoutHandle=-1,Rde(_)),_=h.cancelPendingCommit,_!==null&&(h.cancelPendingCommit=null,_()),Su=0,Xj(),oa=h,hr=_=cu(h.current,null),yr=y,qr=0,Qo=null,nh=!1,yb=Se(h,y),qj=!1,vb=Jo=$j=mf=rh=Va=0,Po=vv=null,Vj=!1,(y&8)!==0&&(y|=y&32);var j=h.entangledLanes;if(j!==0)for(h=h.entanglements,j&=y;0<j;){var V=31-Oe(j),Z=1<<V;y|=h[V],j&=~Z}return wu=y,JS(),_}function VB(h,y){Xn=null,re.H=mv,y===ub||y===s_?(y=oU(),qr=3):y===ZA?(y=oU(),qr=4):qr=y===Pj?8:y!==null&&typeof y=="object"&&typeof y.then=="function"?6:1,Qo=y,hr===null&&(Va=1,v_(h,Al(y,h.current)))}function GB(){var h=Xo.current;return h===null?!0:(yr&4194048)===yr?Dl===null:(yr&62914560)===yr||(yr&536870912)!==0?h===Dl:!1}function WB(){var h=re.H;return re.H=mv,h===null?mv:h}function KB(){var h=re.A;return re.A=hde,h}function E_(){Va=4,nh||(yr&4194048)!==yr&&Xo.current!==null||(yb=!0),(rh&134217727)===0&&(mf&134217727)===0||oa===null||sh(oa,yr,Jo,!1)}function Yj(h,y,_){var j=Ir;Ir|=2;var V=WB(),Z=KB();(oa!==h||yr!==y)&&(j_=null,Sb(h,y)),y=!1;var Ne=Va;e:do try{if(qr!==0&&hr!==null){var qe=hr,lt=Qo;switch(qr){case 8:Xj(),Ne=6;break e;case 3:case 2:case 9:case 6:Xo.current===null&&(y=!0);var vt=qr;if(qr=0,Qo=null,_b(h,qe,lt,vt),_&&yb){Ne=0;break e}break;default:vt=qr,qr=0,Qo=null,_b(h,qe,lt,vt)}}gde(),Ne=Va;break}catch(Rt){VB(h,Rt)}while(!0);return y&&h.shellSuspendCounter++,uu=nf=null,Ir=j,re.H=V,re.A=Z,hr===null&&(oa=null,yr=0,JS()),Ne}function gde(){for(;hr!==null;)XB(hr)}function bde(h,y){var _=Ir;Ir|=2;var j=WB(),V=KB();oa!==h||yr!==y?(j_=null,A_=L()+500,Sb(h,y)):yb=Se(h,y);e:do try{if(qr!==0&&hr!==null){y=hr;var Z=Qo;t:switch(qr){case 1:qr=0,Qo=null,_b(h,y,Z,1);break;case 2:case 9:if(iU(Z)){qr=0,Qo=null,YB(y);break}y=function(){qr!==2&&qr!==9||oa!==h||(qr=7),ud(h)},Z.then(y,y);break e;case 3:qr=7;break e;case 4:qr=5;break e;case 7:iU(Z)?(qr=0,Qo=null,YB(y)):(qr=0,Qo=null,_b(h,y,Z,7));break;case 5:var Ne=null;switch(hr.tag){case 26:Ne=hr.memoizedState;case 5:case 27:var qe=hr;if(Ne?R8(Ne):qe.stateNode.complete){qr=0,Qo=null;var lt=qe.sibling;if(lt!==null)hr=lt;else{var vt=qe.return;vt!==null?(hr=vt,D_(vt)):hr=null}break t}}qr=0,Qo=null,_b(h,y,Z,5);break;case 6:qr=0,Qo=null,_b(h,y,Z,6);break;case 8:Xj(),Va=6;break e;default:throw Error(r(462))}}xde();break}catch(Rt){VB(h,Rt)}while(!0);return uu=nf=null,re.H=j,re.A=V,Ir=_,hr!==null?0:(oa=null,yr=0,JS(),Va)}function xde(){for(;hr!==null&&!me();)XB(hr)}function XB(h){var y=yB(h.alternate,h,wu);h.memoizedProps=h.pendingProps,y===null?D_(h):hr=y}function YB(h){var y=h,_=y.alternate;switch(y.tag){case 15:case 0:y=hB(_,y,y.pendingProps,y.type,void 0,yr);break;case 11:y=hB(_,y,y.pendingProps,y.type.render,y.ref,yr);break;case 5:uj(y);default:wB(_,y),y=hr=K5(y,wu),y=yB(_,y,wu)}h.memoizedProps=h.pendingProps,y===null?D_(h):hr=y}function _b(h,y,_,j){uu=nf=null,uj(y),mb=null,av=0;var V=y.return;try{if(sde(h,V,y,_,yr)){Va=1,v_(h,Al(_,h.current)),hr=null;return}}catch(Z){if(V!==null)throw hr=V,Z;Va=1,v_(h,Al(_,h.current)),hr=null;return}y.flags&32768?(Sr||j===1?h=!0:yb||(yr&536870912)!==0?h=!1:(nh=h=!0,(j===2||j===9||j===3||j===6)&&(j=Xo.current,j!==null&&j.tag===13&&(j.flags|=16384))),QB(y,h)):D_(y)}function D_(h){var y=h;do{if((y.flags&32768)!==0){QB(y,nh);return}h=y.return;var _=cde(y.alternate,y,wu);if(_!==null){hr=_;return}if(y=y.sibling,y!==null){hr=y;return}hr=y=h}while(y!==null);Va===0&&(Va=5)}function QB(h,y){do{var _=dde(h.alternate,h);if(_!==null){_.flags&=32767,hr=_;return}if(_=h.return,_!==null&&(_.flags|=32768,_.subtreeFlags=0,_.deletions=null),!y&&(h=h.sibling,h!==null)){hr=h;return}hr=h=_}while(h!==null);Va=6,hr=null}function JB(h,y,_,j,V,Z,Ne,qe,lt){h.cancelPendingCommit=null;do F_();while(Ni!==0);if((Ir&6)!==0)throw Error(r(327));if(y!==null){if(y===h.current)throw Error(r(177));if(Z=y.lanes|y.childLanes,Z|=OA,ht(h,_,Z,Ne,qe,lt),h===oa&&(hr=oa=null,yr=0),wb=y,ih=h,Su=_,Gj=Z,Wj=V,BB=j,(y.subtreeFlags&10256)!==0||(y.flags&10256)!==0?(h.callbackNode=null,h.callbackPriority=0,Sde(je,function(){return r8(),null})):(h.callbackNode=null,h.callbackPriority=0),j=(y.flags&13878)!==0,(y.subtreeFlags&13878)!==0||j){j=re.T,re.T=null,V=J.p,J.p=2,Ne=Ir,Ir|=4;try{ude(h,y,_)}finally{Ir=Ne,J.p=V,re.T=j}}Ni=1,ZB(),e8(),t8()}}function ZB(){if(Ni===1){Ni=0;var h=ih,y=wb,_=(y.flags&13878)!==0;if((y.subtreeFlags&13878)!==0||_){_=re.T,re.T=null;var j=J.p;J.p=2;var V=Ir;Ir|=4;try{DB(y,h);var Z=lM,Ne=YS(h.containerInfo),qe=Z.focusedElem,lt=Z.selectionRange;if(Ne!==qe&&qe&&qe.ownerDocument&&Jy(qe.ownerDocument.documentElement,qe)){if(lt!==null&&DA(qe)){var vt=lt.start,Rt=lt.end;if(Rt===void 0&&(Rt=vt),"selectionStart"in qe)qe.selectionStart=vt,qe.selectionEnd=Math.min(Rt,qe.value.length);else{var Ut=qe.ownerDocument||document,kt=Ut&&Ut.defaultView||window;if(kt.getSelection){var At=kt.getSelection(),bn=qe.textContent.length,In=Math.min(lt.start,bn),Qr=lt.end===void 0?In:Math.min(lt.end,bn);!At.extend&&In>Qr&&(Ne=Qr,Qr=In,In=Ne);var gt=Qy(qe,In),pt=Qy(qe,Qr);if(gt&&pt&&(At.rangeCount!==1||At.anchorNode!==gt.node||At.anchorOffset!==gt.offset||At.focusNode!==pt.node||At.focusOffset!==pt.offset)){var yt=Ut.createRange();yt.setStart(gt.node,gt.offset),At.removeAllRanges(),In>Qr?(At.addRange(yt),At.extend(pt.node,pt.offset)):(yt.setEnd(pt.node,pt.offset),At.addRange(yt))}}}}for(Ut=[],At=qe;At=At.parentNode;)At.nodeType===1&&Ut.push({element:At,left:At.scrollLeft,top:At.scrollTop});for(typeof qe.focus=="function"&&qe.focus(),qe=0;qe<Ut.length;qe++){var It=Ut[qe];It.element.scrollLeft=It.left,It.element.scrollTop=It.top}}G_=!!oM,lM=oM=null}finally{Ir=V,J.p=j,re.T=_}}h.current=y,Ni=2}}function e8(){if(Ni===2){Ni=0;var h=ih,y=wb,_=(y.flags&8772)!==0;if((y.subtreeFlags&8772)!==0||_){_=re.T,re.T=null;var j=J.p;J.p=2;var V=Ir;Ir|=4;try{TB(h,y.alternate,y)}finally{Ir=V,J.p=j,re.T=_}}Ni=3}}function t8(){if(Ni===4||Ni===3){Ni=0,H();var h=ih,y=wb,_=Su,j=BB;(y.subtreeFlags&10256)!==0||(y.flags&10256)!==0?Ni=5:(Ni=0,wb=ih=null,n8(h,h.pendingLanes));var V=h.pendingLanes;if(V===0&&(ah=null),Qt(_),y=y.stateNode,ze&&typeof ze.onCommitFiberRoot=="function")try{ze.onCommitFiberRoot(Ce,y,void 0,(y.current.flags&128)===128)}catch{}if(j!==null){y=re.T,V=J.p,J.p=2,re.T=null;try{for(var Z=h.onRecoverableError,Ne=0;Ne<j.length;Ne++){var qe=j[Ne];Z(qe.value,{componentStack:qe.stack})}}finally{re.T=y,J.p=V}}(Su&3)!==0&&F_(),ud(h),V=h.pendingLanes,(_&261930)!==0&&(V&42)!==0?h===Kj?wv++:(wv=0,Kj=h):wv=0,Sv(0)}}function n8(h,y){(h.pooledCacheLanes&=y)===0&&(y=h.pooledCache,y!=null&&(h.pooledCache=null,nv(y)))}function F_(){return ZB(),e8(),t8(),r8()}function r8(){if(Ni!==5)return!1;var h=ih,y=Gj;Gj=0;var _=Qt(Su),j=re.T,V=J.p;try{J.p=32>_?32:_,re.T=null,_=Wj,Wj=null;var Z=ih,Ne=Su;if(Ni=0,wb=ih=null,Su=0,(Ir&6)!==0)throw Error(r(331));var qe=Ir;if(Ir|=4,OB(Z.current),RB(Z,Z.current,Ne,_),Ir=qe,Sv(0,!1),ze&&typeof ze.onPostCommitFiberRoot=="function")try{ze.onPostCommitFiberRoot(Ce,Z)}catch{}return!0}finally{J.p=V,re.T=j,n8(h,y)}}function a8(h,y,_){y=Al(_,y),y=Cj(h.stateNode,y,2),h=Jm(h,y,2),h!==null&&(at(h,2),ud(h))}function $r(h,y,_){if(h.tag===3)a8(h,h,_);else for(;y!==null;){if(y.tag===3){a8(y,h,_);break}else if(y.tag===1){var j=y.stateNode;if(typeof y.type.getDerivedStateFromError=="function"||typeof j.componentDidCatch=="function"&&(ah===null||!ah.has(j))){h=Al(_,h),_=iB(2),j=Jm(y,_,2),j!==null&&(sB(_,j,y,h),at(j,2),ud(j));break}}y=y.return}}function Qj(h,y,_){var j=h.pingCache;if(j===null){j=h.pingCache=new pde;var V=new Set;j.set(y,V)}else V=j.get(y),V===void 0&&(V=new Set,j.set(y,V));V.has(_)||(qj=!0,V.add(_),h=yde.bind(null,h,y,_),y.then(h,h))}function yde(h,y,_){var j=h.pingCache;j!==null&&j.delete(y),h.pingedLanes|=h.suspendedLanes&_,h.warmLanes&=~_,oa===h&&(yr&_)===_&&(Va===4||Va===3&&(yr&62914560)===yr&&300>L()-T_?(Ir&2)===0&&Sb(h,0):$j|=_,vb===yr&&(vb=0)),ud(h)}function i8(h,y){y===0&&(y=st()),h=Zp(h,y),h!==null&&(at(h,y),ud(h))}function vde(h){var y=h.memoizedState,_=0;y!==null&&(_=y.retryLane),i8(h,_)}function wde(h,y){var _=0;switch(h.tag){case 31:case 13:var j=h.stateNode,V=h.memoizedState;V!==null&&(_=V.retryLane);break;case 19:j=h.stateNode;break;case 22:j=h.stateNode._retryCache;break;default:throw Error(r(314))}j!==null&&j.delete(y),i8(h,_)}function Sde(h,y){return ye(h,y)}var R_=null,kb=null,Jj=!1,L_=!1,Zj=!1,oh=0;function ud(h){h!==kb&&h.next===null&&(kb===null?R_=kb=h:kb=kb.next=h),L_=!0,Jj||(Jj=!0,kde())}function Sv(h,y){if(!Zj&&L_){Zj=!0;do for(var _=!1,j=R_;j!==null;){if(h!==0){var V=j.pendingLanes;if(V===0)var Z=0;else{var Ne=j.suspendedLanes,qe=j.pingedLanes;Z=(1<<31-Oe(42|h)+1)-1,Z&=V&~(Ne&~qe),Z=Z&201326741?Z&201326741|1:Z?Z|2:0}Z!==0&&(_=!0,c8(j,Z))}else Z=yr,Z=de(j,j===oa?Z:0,j.cancelPendingCommit!==null||j.timeoutHandle!==-1),(Z&3)===0||Se(j,Z)||(_=!0,c8(j,Z));j=j.next}while(_);Zj=!1}}function _de(){s8()}function s8(){L_=Jj=!1;var h=0;oh!==0&&Fde()&&(h=oh);for(var y=L(),_=null,j=R_;j!==null;){var V=j.next,Z=o8(j,y);Z===0?(j.next=null,_===null?R_=V:_.next=V,V===null&&(kb=_)):(_=j,(h!==0||(Z&3)!==0)&&(L_=!0)),j=V}Ni!==0&&Ni!==5||Sv(h),oh!==0&&(oh=0)}function o8(h,y){for(var _=h.suspendedLanes,j=h.pingedLanes,V=h.expirationTimes,Z=h.pendingLanes&-62914561;0<Z;){var Ne=31-Oe(Z),qe=1<<Ne,lt=V[Ne];lt===-1?((qe&_)===0||(qe&j)!==0)&&(V[Ne]=$e(qe,y)):lt<=y&&(h.expiredLanes|=qe),Z&=~qe}if(y=oa,_=yr,_=de(h,h===y?_:0,h.cancelPendingCommit!==null||h.timeoutHandle!==-1),j=h.callbackNode,_===0||h===y&&(qr===2||qr===9)||h.cancelPendingCommit!==null)return j!==null&&j!==null&&he(j),h.callbackNode=null,h.callbackPriority=0;if((_&3)===0||Se(h,_)){if(y=_&-_,y===h.callbackPriority)return y;switch(j!==null&&he(j),Qt(_)){case 2:case 8:_=ke;break;case 32:_=je;break;case 268435456:_=xe;break;default:_=je}return j=l8.bind(null,h),_=ye(_,j),h.callbackPriority=y,h.callbackNode=_,y}return j!==null&&j!==null&&he(j),h.callbackPriority=2,h.callbackNode=null,2}function l8(h,y){if(Ni!==0&&Ni!==5)return h.callbackNode=null,h.callbackPriority=0,null;var _=h.callbackNode;if(F_()&&h.callbackNode!==_)return null;var j=yr;return j=de(h,h===oa?j:0,h.cancelPendingCommit!==null||h.timeoutHandle!==-1),j===0?null:(qB(h,j,y),o8(h,L()),h.callbackNode!=null&&h.callbackNode===_?l8.bind(null,h):null)}function c8(h,y){if(F_())return null;qB(h,y,!0)}function kde(){Lde(function(){(Ir&6)!==0?ye(ge,_de):s8()})}function eM(){if(oh===0){var h=cb;h===0&&(h=Xe,Xe<<=1,(Xe&261888)===0&&(Xe=256)),oh=h}return oh}function d8(h){return h==null||typeof h=="symbol"||typeof h=="boolean"?null:typeof h=="function"?h:mr(""+h)}function u8(h,y){var _=y.ownerDocument.createElement("input");return _.name=y.name,_.value=y.value,h.id&&_.setAttribute("form",h.id),y.parentNode.insertBefore(_,y),h=new FormData(h),_.parentNode.removeChild(_),h}function Nde(h,y,_,j,V){if(y==="submit"&&_&&_.stateNode===V){var Z=d8((V[Jt]||null).action),Ne=j.submitter;Ne&&(y=(y=Ne[Jt]||null)?d8(y.formAction):Ne.getAttribute("formAction"),y!==null&&(Z=y,Ne=null));var qe=new Vo("action","action",null,j,V);h.push({event:qe,listeners:[{instance:null,listener:function(){if(j.defaultPrevented){if(oh!==0){var lt=Ne?u8(V,Ne):new FormData(V);vj(_,{pending:!0,data:lt,method:V.method,action:Z},null,lt)}}else typeof Z=="function"&&(qe.preventDefault(),lt=Ne?u8(V,Ne):new FormData(V),vj(_,{pending:!0,data:lt,method:V.method,action:Z},Z,lt))},currentTarget:V}]})}}for(var tM=0;tM<IA.length;tM++){var nM=IA[tM],Cde=nM.toLowerCase(),Pde=nM[0].toUpperCase()+nM.slice(1);kc(Cde,"on"+Pde)}kc(H5,"onAnimationEnd"),kc(q5,"onAnimationIteration"),kc($5,"onAnimationStart"),kc("dblclick","onDoubleClick"),kc("focusin","onFocus"),kc("focusout","onBlur"),kc(qce,"onTransitionRun"),kc($ce,"onTransitionStart"),kc(Vce,"onTransitionCancel"),kc(V5,"onTransitionEnd"),Ct("onMouseEnter",["mouseout","mouseover"]),Ct("onMouseLeave",["mouseout","mouseover"]),Ct("onPointerEnter",["pointerout","pointerover"]),Ct("onPointerLeave",["pointerout","pointerover"]),rt("onChange","change click focusin focusout input keydown keyup selectionchange".split(" ")),rt("onSelect","focusout contextmenu dragend focusin keydown keyup mousedown mouseup selectionchange".split(" ")),rt("onBeforeInput",["compositionend","keypress","textInput","paste"]),rt("onCompositionEnd","compositionend focusout keydown keypress keyup mousedown".split(" ")),rt("onCompositionStart","compositionstart focusout keydown keypress keyup mousedown".split(" ")),rt("onCompositionUpdate","compositionupdate focusout keydown keypress keyup mousedown".split(" "));var _v="abort canplay canplaythrough durationchange emptied encrypted ended error loadeddata loadedmetadata loadstart pause play playing progress ratechange resize seeked seeking stalled suspend timeupdate volumechange waiting".split(" "),Tde=new Set("beforetoggle cancel close invalid load scroll scrollend toggle".split(" ").concat(_v));function m8(h,y){y=(y&4)!==0;for(var _=0;_<h.length;_++){var j=h[_],V=j.event;j=j.listeners;e:{var Z=void 0;if(y)for(var Ne=j.length-1;0<=Ne;Ne--){var qe=j[Ne],lt=qe.instance,vt=qe.currentTarget;if(qe=qe.listener,lt!==Z&&V.isPropagationStopped())break e;Z=qe,V.currentTarget=vt;try{Z(V)}catch(Rt){QS(Rt)}V.currentTarget=null,Z=lt}else for(Ne=0;Ne<j.length;Ne++){if(qe=j[Ne],lt=qe.instance,vt=qe.currentTarget,qe=qe.listener,lt!==Z&&V.isPropagationStopped())break e;Z=qe,V.currentTarget=vt;try{Z(V)}catch(Rt){QS(Rt)}V.currentTarget=null,Z=lt}}}}function pr(h,y){var _=y[Tt];_===void 0&&(_=y[Tt]=new Set);var j=h+"__bubble";_.has(j)||(h8(y,h,2,!1),_.add(j))}function rM(h,y,_){var j=0;y&&(j|=4),h8(_,h,j,y)}var I_="_reactListening"+Math.random().toString(36).slice(2);function aM(h){if(!h[I_]){h[I_]=!0,Je.forEach(function(_){_!=="selectionchange"&&(Tde.has(_)||rM(_,!1,h),rM(_,!0,h))});var y=h.nodeType===9?h:h.ownerDocument;y===null||y[I_]||(y[I_]=!0,rM("selectionchange",!1,y))}}function h8(h,y,_,j){switch(H8(y)){case 2:var V=nue;break;case 8:V=rue;break;default:V=yM}_=V.bind(null,y,_,h),V=void 0,!zi||y!=="touchstart"&&y!=="touchmove"&&y!=="wheel"||(V=!0),j?V!==void 0?h.addEventListener(y,_,{capture:!0,passive:V}):h.addEventListener(y,_,!0):V!==void 0?h.addEventListener(y,_,{passive:V}):h.addEventListener(y,_,!1)}function iM(h,y,_,j,V){var Z=j;if((y&1)===0&&(y&2)===0&&j!==null)e:for(;;){if(j===null)return;var Ne=j.tag;if(Ne===3||Ne===4){var qe=j.stateNode.containerInfo;if(qe===V)break;if(Ne===4)for(Ne=j.return;Ne!==null;){var lt=Ne.tag;if((lt===3||lt===4)&&Ne.stateNode.containerInfo===V)return;Ne=Ne.return}for(;qe!==null;){if(Ne=dt(qe),Ne===null)return;if(lt=Ne.tag,lt===5||lt===6||lt===26||lt===27){j=Z=Ne;continue e}qe=qe.parentNode}}j=j.return}$p(function(){var vt=Z,Rt=vo(_),Ut=[];e:{var kt=G5.get(h);if(kt!==void 0){var At=Vo,bn=h;switch(h){case"keypress":if(ru(_)===0)break e;case"keydown":case"keyup":At=eb;break;case"focusin":bn="focus",At=ci;break;case"focusout":bn="blur",At=ci;break;case"beforeblur":case"afterblur":At=ci;break;case"click":if(_.button===2)break e;case"auxclick":case"dblclick":case"mousedown":case"mousemove":case"mouseup":case"mouseout":case"mouseover":case"contextmenu":At=Om;break;case"drag":case"dragend":case"dragenter":case"dragexit":case"dragleave":case"dragover":case"dragstart":case"drop":At=od;break;case"touchcancel":case"touchend":case"touchmove":case"touchstart":At=Sc;break;case H5:case q5:case $5:At=zm;break;case V5:At=qm;break;case"scroll":case"scrollend":At=Sl;break;case"wheel":At=$m;break;case"copy":case"cut":case"paste":At=su;break;case"gotpointercapture":case"lostpointercapture":case"pointercancel":case"pointerdown":case"pointermove":case"pointerout":case"pointerover":case"pointerup":At=Go;break;case"toggle":case"beforetoggle":At=Et}var In=(y&4)!==0,Qr=!In&&(h==="scroll"||h==="scrollend"),gt=In?kt!==null?kt+"Capture":null:kt;In=[];for(var pt=vt,yt;pt!==null;){var It=pt;if(yt=It.stateNode,It=It.tag,It!==5&&It!==26&&It!==27||yt===null||gt===null||(It=ls(pt,gt),It!=null&&In.push(kv(pt,It,yt))),Qr)break;pt=pt.return}0<In.length&&(kt=new At(kt,bn,null,_,Rt),Ut.push({event:kt,listeners:In}))}}if((y&7)===0){e:{if(kt=h==="mouseover"||h==="pointerover",At=h==="mouseout"||h==="pointerout",kt&&_!==Ms&&(bn=_.relatedTarget||_.fromElement)&&(dt(bn)||bn[zt]))break e;if((At||kt)&&(kt=Rt.window===Rt?Rt:(kt=Rt.ownerDocument)?kt.defaultView||kt.parentWindow:window,At?(bn=_.relatedTarget||_.toElement,At=vt,bn=bn?dt(bn):null,bn!==null&&(Qr=s(bn),In=bn.tag,bn!==Qr||In!==5&&In!==27&&In!==6)&&(bn=null)):(At=null,bn=vt),At!==bn)){if(In=Om,It="onMouseLeave",gt="onMouseEnter",pt="mouse",(h==="pointerout"||h==="pointerover")&&(In=Go,It="onPointerLeave",gt="onPointerEnter",pt="pointer"),Qr=At==null?kt:We(At),yt=bn==null?kt:We(bn),kt=new In(It,pt+"leave",At,_,Rt),kt.target=Qr,kt.relatedTarget=yt,It=null,dt(Rt)===vt&&(In=new In(gt,pt+"enter",bn,_,Rt),In.target=yt,In.relatedTarget=Qr,It=In),Qr=It,At&&bn)t:{for(In=Ade,gt=At,pt=bn,yt=0,It=gt;It;It=In(It))yt++;It=0;for(var An=pt;An;An=In(An))It++;for(;0<yt-It;)gt=In(gt),yt--;for(;0<It-yt;)pt=In(pt),It--;for(;yt--;){if(gt===pt||pt!==null&&gt===pt.alternate){In=gt;break t}gt=In(gt),pt=In(pt)}In=null}else In=null;At!==null&&p8(Ut,kt,At,In,!1),bn!==null&&Qr!==null&&p8(Ut,Qr,bn,In,!0)}}e:{if(kt=vt?We(vt):window,At=kt.nodeName&&kt.nodeName.toLowerCase(),At==="select"||At==="input"&&kt.type==="file")var Er=Ui;else if(Na(kt))if(Pl)Er=Xp;else{Er=ri;var vn=Yy}else At=kt.nodeName,!At||At.toLowerCase()!=="input"||kt.type!=="checkbox"&&kt.type!=="radio"?vt&&yl(vt.elementType)&&(Er=Ui):Er=lu;if(Er&&(Er=Er(h,vt))){ni(Ut,Er,_,Rt);break e}vn&&vn(h,kt,vt),h==="focusout"&&vt&&kt.type==="number"&&vt.memoizedProps.value!=null&&Br(kt,"number",kt.value)}switch(vn=vt?We(vt):window,h){case"focusin":(Na(vn)||vn.contentEditable==="true")&&(tb=vn,FA=vt,Zy=null);break;case"focusout":Zy=FA=tb=null;break;case"mousedown":RA=!0;break;case"contextmenu":case"mouseup":case"dragend":RA=!1,U5(Ut,_,Rt);break;case"selectionchange":if(Hce)break;case"keydown":case"keyup":U5(Ut,_,Rt)}var Qn;if(kn)e:{switch(h){case"compositionstart":var vr="onCompositionStart";break e;case"compositionend":vr="onCompositionEnd";break e;case"compositionupdate":vr="onCompositionUpdate";break e}vr=void 0}else Or?xr(h,_)&&(vr="onCompositionEnd"):h==="keydown"&&_.keyCode===229&&(vr="onCompositionStart");vr&&(Xt&&_.locale!=="ko"&&(Or||vr!=="onCompositionStart"?vr==="onCompositionEnd"&&Or&&(Qn=Im()):(wo=Rt,ha="value"in wo?wo.value:wo.textContent,Or=!0)),vn=O_(vt,vr),0<vn.length&&(vr=new Nl(vr,h,null,_,Rt),Ut.push({event:vr,listeners:vn}),Qn?vr.data=Qn:(Qn=lr(_),Qn!==null&&(vr.data=Qn)))),(Qn=Dt?La(h,_):un(h,_))&&(vr=O_(vt,"onBeforeInput"),0<vr.length&&(vn=new Nl("onBeforeInput","beforeinput",null,_,Rt),Ut.push({event:vn,listeners:vr}),vn.data=Qn)),Nde(Ut,h,vt,_,Rt)}m8(Ut,y)})}function kv(h,y,_){return{instance:h,listener:y,currentTarget:_}}function O_(h,y){for(var _=y+"Capture",j=[];h!==null;){var V=h,Z=V.stateNode;if(V=V.tag,V!==5&&V!==26&&V!==27||Z===null||(V=ls(h,_),V!=null&&j.unshift(kv(h,V,Z)),V=ls(h,y),V!=null&&j.push(kv(h,V,Z))),h.tag===3)return j;h=h.return}return[]}function Ade(h){if(h===null)return null;do h=h.return;while(h&&h.tag!==5&&h.tag!==27);return h||null}function p8(h,y,_,j,V){for(var Z=y._reactName,Ne=[];_!==null&&_!==j;){var qe=_,lt=qe.alternate,vt=qe.stateNode;if(qe=qe.tag,lt!==null&&lt===j)break;qe!==5&&qe!==26&&qe!==27||vt===null||(lt=vt,V?(vt=ls(_,Z),vt!=null&&Ne.unshift(kv(_,vt,lt))):V||(vt=ls(_,Z),vt!=null&&Ne.push(kv(_,vt,lt)))),_=_.return}Ne.length!==0&&h.push({event:y,listeners:Ne})}var jde=/\r\n?/g,Mde=/\u0000|\uFFFD/g;function f8(h){return(typeof h=="string"?h:""+h).replace(jde,`
+`).replace(Mde,"")}function g8(h,y){return y=f8(y),f8(h)===y}function Yr(h,y,_,j,V,Z){switch(_){case"children":typeof j=="string"?y==="body"||y==="textarea"&&j===""||or(h,j):(typeof j=="number"||typeof j=="bigint")&&y!=="body"&&or(h,""+j);break;case"className":Ht(h,"class",j);break;case"tabIndex":Ht(h,"tabindex",j);break;case"dir":case"role":case"viewBox":case"width":case"height":Ht(h,_,j);break;case"style":yc(h,j,Z);break;case"data":if(y!=="object"){Ht(h,"data",j);break}case"src":case"href":if(j===""&&(y!=="a"||_!=="href")){h.removeAttribute(_);break}if(j==null||typeof j=="function"||typeof j=="symbol"||typeof j=="boolean"){h.removeAttribute(_);break}j=mr(""+j),h.setAttribute(_,j);break;case"action":case"formAction":if(typeof j=="function"){h.setAttribute(_,"javascript:throw new Error('A React form was unexpectedly submitted. If you called form.submit() manually, consider using form.requestSubmit() instead. If you\\'re trying to use event.stopPropagation() in a submit event handler, consider also calling event.preventDefault().')");break}else typeof Z=="function"&&(_==="formAction"?(y!=="input"&&Yr(h,y,"name",V.name,V,null),Yr(h,y,"formEncType",V.formEncType,V,null),Yr(h,y,"formMethod",V.formMethod,V,null),Yr(h,y,"formTarget",V.formTarget,V,null)):(Yr(h,y,"encType",V.encType,V,null),Yr(h,y,"method",V.method,V,null),Yr(h,y,"target",V.target,V,null)));if(j==null||typeof j=="symbol"||typeof j=="boolean"){h.removeAttribute(_);break}j=mr(""+j),h.setAttribute(_,j);break;case"onClick":j!=null&&(h.onclick=Wt);break;case"onScroll":j!=null&&pr("scroll",h);break;case"onScrollEnd":j!=null&&pr("scrollend",h);break;case"dangerouslySetInnerHTML":if(j!=null){if(typeof j!="object"||!("__html"in j))throw Error(r(61));if(_=j.__html,_!=null){if(V.children!=null)throw Error(r(60));h.innerHTML=_}}break;case"multiple":h.multiple=j&&typeof j!="function"&&typeof j!="symbol";break;case"muted":h.muted=j&&typeof j!="function"&&typeof j!="symbol";break;case"suppressContentEditableWarning":case"suppressHydrationWarning":case"defaultValue":case"defaultChecked":case"innerHTML":case"ref":break;case"autoFocus":break;case"xlinkHref":if(j==null||typeof j=="function"||typeof j=="boolean"||typeof j=="symbol"){h.removeAttribute("xlink:href");break}_=mr(""+j),h.setAttributeNS("http://www.w3.org/1999/xlink","xlink:href",_);break;case"contentEditable":case"spellCheck":case"draggable":case"value":case"autoReverse":case"externalResourcesRequired":case"focusable":case"preserveAlpha":j!=null&&typeof j!="function"&&typeof j!="symbol"?h.setAttribute(_,""+j):h.removeAttribute(_);break;case"inert":case"allowFullScreen":case"async":case"autoPlay":case"controls":case"default":case"defer":case"disabled":case"disablePictureInPicture":case"disableRemotePlayback":case"formNoValidate":case"hidden":case"loop":case"noModule":case"noValidate":case"open":case"playsInline":case"readOnly":case"required":case"reversed":case"scoped":case"seamless":case"itemScope":j&&typeof j!="function"&&typeof j!="symbol"?h.setAttribute(_,""):h.removeAttribute(_);break;case"capture":case"download":j===!0?h.setAttribute(_,""):j!==!1&&j!=null&&typeof j!="function"&&typeof j!="symbol"?h.setAttribute(_,j):h.removeAttribute(_);break;case"cols":case"rows":case"size":case"span":j!=null&&typeof j!="function"&&typeof j!="symbol"&&!isNaN(j)&&1<=j?h.setAttribute(_,j):h.removeAttribute(_);break;case"rowSpan":case"start":j==null||typeof j=="function"||typeof j=="symbol"||isNaN(j)?h.removeAttribute(_):h.setAttribute(_,j);break;case"popover":pr("beforetoggle",h),pr("toggle",h),Ke(h,"popover",j);break;case"xlinkActuate":Yt(h,"http://www.w3.org/1999/xlink","xlink:actuate",j);break;case"xlinkArcrole":Yt(h,"http://www.w3.org/1999/xlink","xlink:arcrole",j);break;case"xlinkRole":Yt(h,"http://www.w3.org/1999/xlink","xlink:role",j);break;case"xlinkShow":Yt(h,"http://www.w3.org/1999/xlink","xlink:show",j);break;case"xlinkTitle":Yt(h,"http://www.w3.org/1999/xlink","xlink:title",j);break;case"xlinkType":Yt(h,"http://www.w3.org/1999/xlink","xlink:type",j);break;case"xmlBase":Yt(h,"http://www.w3.org/XML/1998/namespace","xml:base",j);break;case"xmlLang":Yt(h,"http://www.w3.org/XML/1998/namespace","xml:lang",j);break;case"xmlSpace":Yt(h,"http://www.w3.org/XML/1998/namespace","xml:space",j);break;case"is":Ke(h,"is",j);break;case"innerText":case"textContent":break;default:(!(2<_.length)||_[0]!=="o"&&_[0]!=="O"||_[1]!=="n"&&_[1]!=="N")&&(_=Pt.get(_)||_,Ke(h,_,j))}}function sM(h,y,_,j,V,Z){switch(_){case"style":yc(h,j,Z);break;case"dangerouslySetInnerHTML":if(j!=null){if(typeof j!="object"||!("__html"in j))throw Error(r(61));if(_=j.__html,_!=null){if(V.children!=null)throw Error(r(60));h.innerHTML=_}}break;case"children":typeof j=="string"?or(h,j):(typeof j=="number"||typeof j=="bigint")&&or(h,""+j);break;case"onScroll":j!=null&&pr("scroll",h);break;case"onScrollEnd":j!=null&&pr("scrollend",h);break;case"onClick":j!=null&&(h.onclick=Wt);break;case"suppressContentEditableWarning":case"suppressHydrationWarning":case"innerHTML":case"ref":break;case"innerText":case"textContent":break;default:if(!Ue.hasOwnProperty(_))e:{if(_[0]==="o"&&_[1]==="n"&&(V=_.endsWith("Capture"),y=_.slice(2,V?_.length-7:void 0),Z=h[Jt]||null,Z=Z!=null?Z[_]:null,typeof Z=="function"&&h.removeEventListener(y,Z,V),typeof j=="function")){typeof Z!="function"&&Z!==null&&(_ in h?h[_]=null:h.hasAttribute(_)&&h.removeAttribute(_)),h.addEventListener(y,j,V);break e}_ in h?h[_]=j:j===!0?h.setAttribute(_,""):Ke(h,_,j)}}}function ms(h,y,_){switch(y){case"div":case"span":case"svg":case"path":case"a":case"g":case"p":case"li":break;case"img":pr("error",h),pr("load",h);var j=!1,V=!1,Z;for(Z in _)if(_.hasOwnProperty(Z)){var Ne=_[Z];if(Ne!=null)switch(Z){case"src":j=!0;break;case"srcSet":V=!0;break;case"children":case"dangerouslySetInnerHTML":throw Error(r(137,y));default:Yr(h,y,Z,Ne,_,null)}}V&&Yr(h,y,"srcSet",_.srcSet,_,null),j&&Yr(h,y,"src",_.src,_,null);return;case"input":pr("invalid",h);var qe=Z=Ne=V=null,lt=null,vt=null;for(j in _)if(_.hasOwnProperty(j)){var Rt=_[j];if(Rt!=null)switch(j){case"name":V=Rt;break;case"type":Ne=Rt;break;case"checked":lt=Rt;break;case"defaultChecked":vt=Rt;break;case"value":Z=Rt;break;case"defaultValue":qe=Rt;break;case"children":case"dangerouslySetInnerHTML":if(Rt!=null)throw Error(r(137,y));break;default:Yr(h,y,j,Rt,_,null)}}$n(h,Z,qe,lt,vt,Ne,V,!1);return;case"select":pr("invalid",h),j=Ne=Z=null;for(V in _)if(_.hasOwnProperty(V)&&(qe=_[V],qe!=null))switch(V){case"value":Z=qe;break;case"defaultValue":Ne=qe;break;case"multiple":j=qe;default:Yr(h,y,V,qe,_,null)}y=Z,_=Ne,h.multiple=!!j,y!=null?Kr(h,!!j,y,!1):_!=null&&Kr(h,!!j,_,!0);return;case"textarea":pr("invalid",h),Z=V=j=null;for(Ne in _)if(_.hasOwnProperty(Ne)&&(qe=_[Ne],qe!=null))switch(Ne){case"value":j=qe;break;case"defaultValue":V=qe;break;case"children":Z=qe;break;case"dangerouslySetInnerHTML":if(qe!=null)throw Error(r(91));break;default:Yr(h,y,Ne,qe,_,null)}Hr(h,j,V,Z);return;case"option":for(lt in _)_.hasOwnProperty(lt)&&(j=_[lt],j!=null)&&(lt==="selected"?h.selected=j&&typeof j!="function"&&typeof j!="symbol":Yr(h,y,lt,j,_,null));return;case"dialog":pr("beforetoggle",h),pr("toggle",h),pr("cancel",h),pr("close",h);break;case"iframe":case"object":pr("load",h);break;case"video":case"audio":for(j=0;j<_v.length;j++)pr(_v[j],h);break;case"image":pr("error",h),pr("load",h);break;case"details":pr("toggle",h);break;case"embed":case"source":case"link":pr("error",h),pr("load",h);case"area":case"base":case"br":case"col":case"hr":case"keygen":case"meta":case"param":case"track":case"wbr":case"menuitem":for(vt in _)if(_.hasOwnProperty(vt)&&(j=_[vt],j!=null))switch(vt){case"children":case"dangerouslySetInnerHTML":throw Error(r(137,y));default:Yr(h,y,vt,j,_,null)}return;default:if(yl(y)){for(Rt in _)_.hasOwnProperty(Rt)&&(j=_[Rt],j!==void 0&&sM(h,y,Rt,j,_,void 0));return}}for(qe in _)_.hasOwnProperty(qe)&&(j=_[qe],j!=null&&Yr(h,y,qe,j,_,null))}function Ede(h,y,_,j){switch(y){case"div":case"span":case"svg":case"path":case"a":case"g":case"p":case"li":break;case"input":var V=null,Z=null,Ne=null,qe=null,lt=null,vt=null,Rt=null;for(At in _){var Ut=_[At];if(_.hasOwnProperty(At)&&Ut!=null)switch(At){case"checked":break;case"value":break;case"defaultValue":lt=Ut;default:j.hasOwnProperty(At)||Yr(h,y,At,null,j,Ut)}}for(var kt in j){var At=j[kt];if(Ut=_[kt],j.hasOwnProperty(kt)&&(At!=null||Ut!=null))switch(kt){case"type":Z=At;break;case"name":V=At;break;case"checked":vt=At;break;case"defaultChecked":Rt=At;break;case"value":Ne=At;break;case"defaultValue":qe=At;break;case"children":case"dangerouslySetInnerHTML":if(At!=null)throw Error(r(137,y));break;default:At!==Ut&&Yr(h,y,kt,At,j,Ut)}}Ra(h,Ne,qe,lt,vt,Rt,Z,V);return;case"select":At=Ne=qe=kt=null;for(Z in _)if(lt=_[Z],_.hasOwnProperty(Z)&&lt!=null)switch(Z){case"value":break;case"multiple":At=lt;default:j.hasOwnProperty(Z)||Yr(h,y,Z,null,j,lt)}for(V in j)if(Z=j[V],lt=_[V],j.hasOwnProperty(V)&&(Z!=null||lt!=null))switch(V){case"value":kt=Z;break;case"defaultValue":qe=Z;break;case"multiple":Ne=Z;default:Z!==lt&&Yr(h,y,V,Z,j,lt)}y=qe,_=Ne,j=At,kt!=null?Kr(h,!!_,kt,!1):!!j!=!!_&&(y!=null?Kr(h,!!_,y,!0):Kr(h,!!_,_?[]:"",!1));return;case"textarea":At=kt=null;for(qe in _)if(V=_[qe],_.hasOwnProperty(qe)&&V!=null&&!j.hasOwnProperty(qe))switch(qe){case"value":break;case"children":break;default:Yr(h,y,qe,null,j,V)}for(Ne in j)if(V=j[Ne],Z=_[Ne],j.hasOwnProperty(Ne)&&(V!=null||Z!=null))switch(Ne){case"value":kt=V;break;case"defaultValue":At=V;break;case"children":break;case"dangerouslySetInnerHTML":if(V!=null)throw Error(r(91));break;default:V!==Z&&Yr(h,y,Ne,V,j,Z)}ur(h,kt,At);return;case"option":for(var bn in _)kt=_[bn],_.hasOwnProperty(bn)&&kt!=null&&!j.hasOwnProperty(bn)&&(bn==="selected"?h.selected=!1:Yr(h,y,bn,null,j,kt));for(lt in j)kt=j[lt],At=_[lt],j.hasOwnProperty(lt)&&kt!==At&&(kt!=null||At!=null)&&(lt==="selected"?h.selected=kt&&typeof kt!="function"&&typeof kt!="symbol":Yr(h,y,lt,kt,j,At));return;case"img":case"link":case"area":case"base":case"br":case"col":case"embed":case"hr":case"keygen":case"meta":case"param":case"source":case"track":case"wbr":case"menuitem":for(var In in _)kt=_[In],_.hasOwnProperty(In)&&kt!=null&&!j.hasOwnProperty(In)&&Yr(h,y,In,null,j,kt);for(vt in j)if(kt=j[vt],At=_[vt],j.hasOwnProperty(vt)&&kt!==At&&(kt!=null||At!=null))switch(vt){case"children":case"dangerouslySetInnerHTML":if(kt!=null)throw Error(r(137,y));break;default:Yr(h,y,vt,kt,j,At)}return;default:if(yl(y)){for(var Qr in _)kt=_[Qr],_.hasOwnProperty(Qr)&&kt!==void 0&&!j.hasOwnProperty(Qr)&&sM(h,y,Qr,void 0,j,kt);for(Rt in j)kt=j[Rt],At=_[Rt],!j.hasOwnProperty(Rt)||kt===At||kt===void 0&&At===void 0||sM(h,y,Rt,kt,j,At);return}}for(var gt in _)kt=_[gt],_.hasOwnProperty(gt)&&kt!=null&&!j.hasOwnProperty(gt)&&Yr(h,y,gt,null,j,kt);for(Ut in j)kt=j[Ut],At=_[Ut],!j.hasOwnProperty(Ut)||kt===At||kt==null&&At==null||Yr(h,y,Ut,kt,j,At)}function b8(h){switch(h){case"css":case"script":case"font":case"img":case"image":case"input":case"link":return!0;default:return!1}}function Dde(){if(typeof performance.getEntriesByType=="function"){for(var h=0,y=0,_=performance.getEntriesByType("resource"),j=0;j<_.length;j++){var V=_[j],Z=V.transferSize,Ne=V.initiatorType,qe=V.duration;if(Z&&qe&&b8(Ne)){for(Ne=0,qe=V.responseEnd,j+=1;j<_.length;j++){var lt=_[j],vt=lt.startTime;if(vt>qe)break;var Rt=lt.transferSize,Ut=lt.initiatorType;Rt&&b8(Ut)&&(lt=lt.responseEnd,Ne+=Rt*(lt<qe?1:(qe-vt)/(lt-vt)))}if(--j,y+=8*(Z+Ne)/(V.duration/1e3),h++,10<h)break}}if(0<h)return y/h/1e6}return navigator.connection&&(h=navigator.connection.downlink,typeof h=="number")?h:5}var oM=null,lM=null;function z_(h){return h.nodeType===9?h:h.ownerDocument}function x8(h){switch(h){case"http://www.w3.org/2000/svg":return 1;case"http://www.w3.org/1998/Math/MathML":return 2;default:return 0}}function y8(h,y){if(h===0)switch(y){case"svg":return 1;case"math":return 2;default:return 0}return h===1&&y==="foreignObject"?0:h}function cM(h,y){return h==="textarea"||h==="noscript"||typeof y.children=="string"||typeof y.children=="number"||typeof y.children=="bigint"||typeof y.dangerouslySetInnerHTML=="object"&&y.dangerouslySetInnerHTML!==null&&y.dangerouslySetInnerHTML.__html!=null}var dM=null;function Fde(){var h=window.event;return h&&h.type==="popstate"?h===dM?!1:(dM=h,!0):(dM=null,!1)}var v8=typeof setTimeout=="function"?setTimeout:void 0,Rde=typeof clearTimeout=="function"?clearTimeout:void 0,w8=typeof Promise=="function"?Promise:void 0,Lde=typeof queueMicrotask=="function"?queueMicrotask:typeof w8<"u"?function(h){return w8.resolve(null).then(h).catch(Ide)}:v8;function Ide(h){setTimeout(function(){throw h})}function lh(h){return h==="head"}function S8(h,y){var _=y,j=0;do{var V=_.nextSibling;if(h.removeChild(_),V&&V.nodeType===8)if(_=V.data,_==="/$"||_==="/&"){if(j===0){h.removeChild(V),Tb(y);return}j--}else if(_==="$"||_==="$?"||_==="$~"||_==="$!"||_==="&")j++;else if(_==="html")Nv(h.ownerDocument.documentElement);else if(_==="head"){_=h.ownerDocument.head,Nv(_);for(var Z=_.firstChild;Z;){var Ne=Z.nextSibling,qe=Z.nodeName;Z[Ze]||qe==="SCRIPT"||qe==="STYLE"||qe==="LINK"&&Z.rel.toLowerCase()==="stylesheet"||_.removeChild(Z),Z=Ne}}else _==="body"&&Nv(h.ownerDocument.body);_=V}while(_);Tb(y)}function _8(h,y){var _=h;h=0;do{var j=_.nextSibling;if(_.nodeType===1?y?(_._stashedDisplay=_.style.display,_.style.display="none"):(_.style.display=_._stashedDisplay||"",_.getAttribute("style")===""&&_.removeAttribute("style")):_.nodeType===3&&(y?(_._stashedText=_.nodeValue,_.nodeValue=""):_.nodeValue=_._stashedText||""),j&&j.nodeType===8)if(_=j.data,_==="/$"){if(h===0)break;h--}else _!=="$"&&_!=="$?"&&_!=="$~"&&_!=="$!"||h++;_=j}while(_)}function uM(h){var y=h.firstChild;for(y&&y.nodeType===10&&(y=y.nextSibling);y;){var _=y;switch(y=y.nextSibling,_.nodeName){case"HTML":case"HEAD":case"BODY":uM(_),Le(_);continue;case"SCRIPT":case"STYLE":continue;case"LINK":if(_.rel.toLowerCase()==="stylesheet")continue}h.removeChild(_)}}function Ode(h,y,_,j){for(;h.nodeType===1;){var V=_;if(h.nodeName.toLowerCase()!==y.toLowerCase()){if(!j&&(h.nodeName!=="INPUT"||h.type!=="hidden"))break}else if(j){if(!h[Ze])switch(y){case"meta":if(!h.hasAttribute("itemprop"))break;return h;case"link":if(Z=h.getAttribute("rel"),Z==="stylesheet"&&h.hasAttribute("data-precedence"))break;if(Z!==V.rel||h.getAttribute("href")!==(V.href==null||V.href===""?null:V.href)||h.getAttribute("crossorigin")!==(V.crossOrigin==null?null:V.crossOrigin)||h.getAttribute("title")!==(V.title==null?null:V.title))break;return h;case"style":if(h.hasAttribute("data-precedence"))break;return h;case"script":if(Z=h.getAttribute("src"),(Z!==(V.src==null?null:V.src)||h.getAttribute("type")!==(V.type==null?null:V.type)||h.getAttribute("crossorigin")!==(V.crossOrigin==null?null:V.crossOrigin))&&Z&&h.hasAttribute("async")&&!h.hasAttribute("itemprop"))break;return h;default:return h}}else if(y==="input"&&h.type==="hidden"){var Z=V.name==null?null:""+V.name;if(V.type==="hidden"&&h.getAttribute("name")===Z)return h}else return h;if(h=Fl(h.nextSibling),h===null)break}return null}function zde(h,y,_){if(y==="")return null;for(;h.nodeType!==3;)if((h.nodeType!==1||h.nodeName!=="INPUT"||h.type!=="hidden")&&!_||(h=Fl(h.nextSibling),h===null))return null;return h}function k8(h,y){for(;h.nodeType!==8;)if((h.nodeType!==1||h.nodeName!=="INPUT"||h.type!=="hidden")&&!y||(h=Fl(h.nextSibling),h===null))return null;return h}function mM(h){return h.data==="$?"||h.data==="$~"}function hM(h){return h.data==="$!"||h.data==="$?"&&h.ownerDocument.readyState!=="loading"}function Ude(h,y){var _=h.ownerDocument;if(h.data==="$~")h._reactRetry=y;else if(h.data!=="$?"||_.readyState!=="loading")y();else{var j=function(){y(),_.removeEventListener("DOMContentLoaded",j)};_.addEventListener("DOMContentLoaded",j),h._reactRetry=j}}function Fl(h){for(;h!=null;h=h.nextSibling){var y=h.nodeType;if(y===1||y===3)break;if(y===8){if(y=h.data,y==="$"||y==="$!"||y==="$?"||y==="$~"||y==="&"||y==="F!"||y==="F")break;if(y==="/$"||y==="/&")return null}}return h}var pM=null;function N8(h){h=h.nextSibling;for(var y=0;h;){if(h.nodeType===8){var _=h.data;if(_==="/$"||_==="/&"){if(y===0)return Fl(h.nextSibling);y--}else _!=="$"&&_!=="$!"&&_!=="$?"&&_!=="$~"&&_!=="&"||y++}h=h.nextSibling}return null}function C8(h){h=h.previousSibling;for(var y=0;h;){if(h.nodeType===8){var _=h.data;if(_==="$"||_==="$!"||_==="$?"||_==="$~"||_==="&"){if(y===0)return h;y--}else _!=="/$"&&_!=="/&"||y++}h=h.previousSibling}return null}function P8(h,y,_){switch(y=z_(_),h){case"html":if(h=y.documentElement,!h)throw Error(r(452));return h;case"head":if(h=y.head,!h)throw Error(r(453));return h;case"body":if(h=y.body,!h)throw Error(r(454));return h;default:throw Error(r(451))}}function Nv(h){for(var y=h.attributes;y.length;)h.removeAttributeNode(y[0]);Le(h)}var Rl=new Map,T8=new Set;function U_(h){return typeof h.getRootNode=="function"?h.getRootNode():h.nodeType===9?h:h.ownerDocument}var _u=J.d;J.d={f:Bde,r:Hde,D:qde,C:$de,L:Vde,m:Gde,X:Kde,S:Wde,M:Xde};function Bde(){var h=_u.f(),y=M_();return h||y}function Hde(h){var y=Ae(h);y!==null&&y.tag===5&&y.type==="form"?VU(y):_u.r(h)}var Nb=typeof document>"u"?null:document;function A8(h,y,_){var j=Nb;if(j&&typeof y=="string"&&y){var V=On(y);V='link[rel="'+h+'"][href="'+V+'"]',typeof _=="string"&&(V+='[crossorigin="'+_+'"]'),T8.has(V)||(T8.add(V),h={rel:h,crossOrigin:_,href:y},j.querySelector(V)===null&&(y=j.createElement("link"),ms(y,"link",h),nt(y),j.head.appendChild(y)))}}function qde(h){_u.D(h),A8("dns-prefetch",h,null)}function $de(h,y){_u.C(h,y),A8("preconnect",h,y)}function Vde(h,y,_){_u.L(h,y,_);var j=Nb;if(j&&h&&y){var V='link[rel="preload"][as="'+On(y)+'"]';y==="image"&&_&&_.imageSrcSet?(V+='[imagesrcset="'+On(_.imageSrcSet)+'"]',typeof _.imageSizes=="string"&&(V+='[imagesizes="'+On(_.imageSizes)+'"]')):V+='[href="'+On(h)+'"]';var Z=V;switch(y){case"style":Z=Cb(h);break;case"script":Z=Pb(h)}Rl.has(Z)||(h=m({rel:"preload",href:y==="image"&&_&&_.imageSrcSet?void 0:h,as:y},_),Rl.set(Z,h),j.querySelector(V)!==null||y==="style"&&j.querySelector(Cv(Z))||y==="script"&&j.querySelector(Pv(Z))||(y=j.createElement("link"),ms(y,"link",h),nt(y),j.head.appendChild(y)))}}function Gde(h,y){_u.m(h,y);var _=Nb;if(_&&h){var j=y&&typeof y.as=="string"?y.as:"script",V='link[rel="modulepreload"][as="'+On(j)+'"][href="'+On(h)+'"]',Z=V;switch(j){case"audioworklet":case"paintworklet":case"serviceworker":case"sharedworker":case"worker":case"script":Z=Pb(h)}if(!Rl.has(Z)&&(h=m({rel:"modulepreload",href:h},y),Rl.set(Z,h),_.querySelector(V)===null)){switch(j){case"audioworklet":case"paintworklet":case"serviceworker":case"sharedworker":case"worker":case"script":if(_.querySelector(Pv(Z)))return}j=_.createElement("link"),ms(j,"link",h),nt(j),_.head.appendChild(j)}}}function Wde(h,y,_){_u.S(h,y,_);var j=Nb;if(j&&h){var V=tt(j).hoistableStyles,Z=Cb(h);y=y||"default";var Ne=V.get(Z);if(!Ne){var qe={loading:0,preload:null};if(Ne=j.querySelector(Cv(Z)))qe.loading=5;else{h=m({rel:"stylesheet",href:h,"data-precedence":y},_),(_=Rl.get(Z))&&fM(h,_);var lt=Ne=j.createElement("link");nt(lt),ms(lt,"link",h),lt._p=new Promise(function(vt,Rt){lt.onload=vt,lt.onerror=Rt}),lt.addEventListener("load",function(){qe.loading|=1}),lt.addEventListener("error",function(){qe.loading|=2}),qe.loading|=4,B_(Ne,y,j)}Ne={type:"stylesheet",instance:Ne,count:1,state:qe},V.set(Z,Ne)}}}function Kde(h,y){_u.X(h,y);var _=Nb;if(_&&h){var j=tt(_).hoistableScripts,V=Pb(h),Z=j.get(V);Z||(Z=_.querySelector(Pv(V)),Z||(h=m({src:h,async:!0},y),(y=Rl.get(V))&&gM(h,y),Z=_.createElement("script"),nt(Z),ms(Z,"link",h),_.head.appendChild(Z)),Z={type:"script",instance:Z,count:1,state:null},j.set(V,Z))}}function Xde(h,y){_u.M(h,y);var _=Nb;if(_&&h){var j=tt(_).hoistableScripts,V=Pb(h),Z=j.get(V);Z||(Z=_.querySelector(Pv(V)),Z||(h=m({src:h,async:!0,type:"module"},y),(y=Rl.get(V))&&gM(h,y),Z=_.createElement("script"),nt(Z),ms(Z,"link",h),_.head.appendChild(Z)),Z={type:"script",instance:Z,count:1,state:null},j.set(V,Z))}}function j8(h,y,_,j){var V=(V=B.current)?U_(V):null;if(!V)throw Error(r(446));switch(h){case"meta":case"title":return null;case"style":return typeof _.precedence=="string"&&typeof _.href=="string"?(y=Cb(_.href),_=tt(V).hoistableStyles,j=_.get(y),j||(j={type:"style",instance:null,count:0,state:null},_.set(y,j)),j):{type:"void",instance:null,count:0,state:null};case"link":if(_.rel==="stylesheet"&&typeof _.href=="string"&&typeof _.precedence=="string"){h=Cb(_.href);var Z=tt(V).hoistableStyles,Ne=Z.get(h);if(Ne||(V=V.ownerDocument||V,Ne={type:"stylesheet",instance:null,count:0,state:{loading:0,preload:null}},Z.set(h,Ne),(Z=V.querySelector(Cv(h)))&&!Z._p&&(Ne.instance=Z,Ne.state.loading=5),Rl.has(h)||(_={rel:"preload",as:"style",href:_.href,crossOrigin:_.crossOrigin,integrity:_.integrity,media:_.media,hrefLang:_.hrefLang,referrerPolicy:_.referrerPolicy},Rl.set(h,_),Z||Yde(V,h,_,Ne.state))),y&&j===null)throw Error(r(528,""));return Ne}if(y&&j!==null)throw Error(r(529,""));return null;case"script":return y=_.async,_=_.src,typeof _=="string"&&y&&typeof y!="function"&&typeof y!="symbol"?(y=Pb(_),_=tt(V).hoistableScripts,j=_.get(y),j||(j={type:"script",instance:null,count:0,state:null},_.set(y,j)),j):{type:"void",instance:null,count:0,state:null};default:throw Error(r(444,h))}}function Cb(h){return'href="'+On(h)+'"'}function Cv(h){return'link[rel="stylesheet"]['+h+"]"}function M8(h){return m({},h,{"data-precedence":h.precedence,precedence:null})}function Yde(h,y,_,j){h.querySelector('link[rel="preload"][as="style"]['+y+"]")?j.loading=1:(y=h.createElement("link"),j.preload=y,y.addEventListener("load",function(){return j.loading|=1}),y.addEventListener("error",function(){return j.loading|=2}),ms(y,"link",_),nt(y),h.head.appendChild(y))}function Pb(h){return'[src="'+On(h)+'"]'}function Pv(h){return"script[async]"+h}function E8(h,y,_){if(y.count++,y.instance===null)switch(y.type){case"style":var j=h.querySelector('style[data-href~="'+On(_.href)+'"]');if(j)return y.instance=j,nt(j),j;var V=m({},_,{"data-href":_.href,"data-precedence":_.precedence,href:null,precedence:null});return j=(h.ownerDocument||h).createElement("style"),nt(j),ms(j,"style",V),B_(j,_.precedence,h),y.instance=j;case"stylesheet":V=Cb(_.href);var Z=h.querySelector(Cv(V));if(Z)return y.state.loading|=4,y.instance=Z,nt(Z),Z;j=M8(_),(V=Rl.get(V))&&fM(j,V),Z=(h.ownerDocument||h).createElement("link"),nt(Z);var Ne=Z;return Ne._p=new Promise(function(qe,lt){Ne.onload=qe,Ne.onerror=lt}),ms(Z,"link",j),y.state.loading|=4,B_(Z,_.precedence,h),y.instance=Z;case"script":return Z=Pb(_.src),(V=h.querySelector(Pv(Z)))?(y.instance=V,nt(V),V):(j=_,(V=Rl.get(Z))&&(j=m({},_),gM(j,V)),h=h.ownerDocument||h,V=h.createElement("script"),nt(V),ms(V,"link",j),h.head.appendChild(V),y.instance=V);case"void":return null;default:throw Error(r(443,y.type))}else y.type==="stylesheet"&&(y.state.loading&4)===0&&(j=y.instance,y.state.loading|=4,B_(j,_.precedence,h));return y.instance}function B_(h,y,_){for(var j=_.querySelectorAll('link[rel="stylesheet"][data-precedence],style[data-precedence]'),V=j.length?j[j.length-1]:null,Z=V,Ne=0;Ne<j.length;Ne++){var qe=j[Ne];if(qe.dataset.precedence===y)Z=qe;else if(Z!==V)break}Z?Z.parentNode.insertBefore(h,Z.nextSibling):(y=_.nodeType===9?_.head:_,y.insertBefore(h,y.firstChild))}function fM(h,y){h.crossOrigin==null&&(h.crossOrigin=y.crossOrigin),h.referrerPolicy==null&&(h.referrerPolicy=y.referrerPolicy),h.title==null&&(h.title=y.title)}function gM(h,y){h.crossOrigin==null&&(h.crossOrigin=y.crossOrigin),h.referrerPolicy==null&&(h.referrerPolicy=y.referrerPolicy),h.integrity==null&&(h.integrity=y.integrity)}var H_=null;function D8(h,y,_){if(H_===null){var j=new Map,V=H_=new Map;V.set(_,j)}else V=H_,j=V.get(_),j||(j=new Map,V.set(_,j));if(j.has(h))return j;for(j.set(h,null),_=_.getElementsByTagName(h),V=0;V<_.length;V++){var Z=_[V];if(!(Z[Ze]||Z[jt]||h==="link"&&Z.getAttribute("rel")==="stylesheet")&&Z.namespaceURI!=="http://www.w3.org/2000/svg"){var Ne=Z.getAttribute(y)||"";Ne=h+Ne;var qe=j.get(Ne);qe?qe.push(Z):j.set(Ne,[Z])}}return j}function F8(h,y,_){h=h.ownerDocument||h,h.head.insertBefore(_,y==="title"?h.querySelector("head > title"):null)}function Qde(h,y,_){if(_===1||y.itemProp!=null)return!1;switch(h){case"meta":case"title":return!0;case"style":if(typeof y.precedence!="string"||typeof y.href!="string"||y.href==="")break;return!0;case"link":if(typeof y.rel!="string"||typeof y.href!="string"||y.href===""||y.onLoad||y.onError)break;return y.rel==="stylesheet"?(h=y.disabled,typeof y.precedence=="string"&&h==null):!0;case"script":if(y.async&&typeof y.async!="function"&&typeof y.async!="symbol"&&!y.onLoad&&!y.onError&&y.src&&typeof y.src=="string")return!0}return!1}function R8(h){return!(h.type==="stylesheet"&&(h.state.loading&3)===0)}function Jde(h,y,_,j){if(_.type==="stylesheet"&&(typeof j.media!="string"||matchMedia(j.media).matches!==!1)&&(_.state.loading&4)===0){if(_.instance===null){var V=Cb(j.href),Z=y.querySelector(Cv(V));if(Z){y=Z._p,y!==null&&typeof y=="object"&&typeof y.then=="function"&&(h.count++,h=q_.bind(h),y.then(h,h)),_.state.loading|=4,_.instance=Z,nt(Z);return}Z=y.ownerDocument||y,j=M8(j),(V=Rl.get(V))&&fM(j,V),Z=Z.createElement("link"),nt(Z);var Ne=Z;Ne._p=new Promise(function(qe,lt){Ne.onload=qe,Ne.onerror=lt}),ms(Z,"link",j),_.instance=Z}h.stylesheets===null&&(h.stylesheets=new Map),h.stylesheets.set(_,y),(y=_.state.preload)&&(_.state.loading&3)===0&&(h.count++,_=q_.bind(h),y.addEventListener("load",_),y.addEventListener("error",_))}}var bM=0;function Zde(h,y){return h.stylesheets&&h.count===0&&V_(h,h.stylesheets),0<h.count||0<h.imgCount?function(_){var j=setTimeout(function(){if(h.stylesheets&&V_(h,h.stylesheets),h.unsuspend){var Z=h.unsuspend;h.unsuspend=null,Z()}},6e4+y);0<h.imgBytes&&bM===0&&(bM=62500*Dde());var V=setTimeout(function(){if(h.waitingForImages=!1,h.count===0&&(h.stylesheets&&V_(h,h.stylesheets),h.unsuspend)){var Z=h.unsuspend;h.unsuspend=null,Z()}},(h.imgBytes>bM?50:800)+y);return h.unsuspend=_,function(){h.unsuspend=null,clearTimeout(j),clearTimeout(V)}}:null}function q_(){if(this.count--,this.count===0&&(this.imgCount===0||!this.waitingForImages)){if(this.stylesheets)V_(this,this.stylesheets);else if(this.unsuspend){var h=this.unsuspend;this.unsuspend=null,h()}}}var $_=null;function V_(h,y){h.stylesheets=null,h.unsuspend!==null&&(h.count++,$_=new Map,y.forEach(eue,h),$_=null,q_.call(h))}function eue(h,y){if(!(y.state.loading&4)){var _=$_.get(h);if(_)var j=_.get(null);else{_=new Map,$_.set(h,_);for(var V=h.querySelectorAll("link[data-precedence],style[data-precedence]"),Z=0;Z<V.length;Z++){var Ne=V[Z];(Ne.nodeName==="LINK"||Ne.getAttribute("media")!=="not all")&&(_.set(Ne.dataset.precedence,Ne),j=Ne)}j&&_.set(null,j)}V=y.instance,Ne=V.getAttribute("data-precedence"),Z=_.get(Ne)||j,Z===j&&_.set(null,V),_.set(Ne,V),this.count++,j=q_.bind(this),V.addEventListener("load",j),V.addEventListener("error",j),Z?Z.parentNode.insertBefore(V,Z.nextSibling):(h=h.nodeType===9?h.head:h,h.insertBefore(V,h.firstChild)),y.state.loading|=4}}var Tv={$$typeof:N,Provider:null,Consumer:null,_currentValue:ue,_currentValue2:ue,_threadCount:0};function tue(h,y,_,j,V,Z,Ne,qe,lt){this.tag=1,this.containerInfo=h,this.pingCache=this.current=this.pendingChildren=null,this.timeoutHandle=-1,this.callbackNode=this.next=this.pendingContext=this.context=this.cancelPendingCommit=null,this.callbackPriority=0,this.expirationTimes=He(-1),this.entangledLanes=this.shellSuspendCounter=this.errorRecoveryDisabledLanes=this.expiredLanes=this.warmLanes=this.pingedLanes=this.suspendedLanes=this.pendingLanes=0,this.entanglements=He(0),this.hiddenUpdates=He(null),this.identifierPrefix=j,this.onUncaughtError=V,this.onCaughtError=Z,this.onRecoverableError=Ne,this.pooledCache=null,this.pooledCacheLanes=0,this.formState=lt,this.incompleteTransitions=new Map}function L8(h,y,_,j,V,Z,Ne,qe,lt,vt,Rt,Ut){return h=new tue(h,y,_,Ne,lt,vt,Rt,Ut,qe),y=1,Z===!0&&(y|=24),Z=Ko(3,null,null,y),h.current=Z,Z.stateNode=h,y=YA(),y.refCount++,h.pooledCache=y,y.refCount++,Z.memoizedState={element:j,isDehydrated:_,cache:y},ej(Z),h}function I8(h){return h?(h=ab,h):ab}function O8(h,y,_,j,V,Z){V=I8(V),j.context===null?j.context=V:j.pendingContext=V,j=Qm(y),j.payload={element:_},Z=Z===void 0?null:Z,Z!==null&&(j.callback=Z),_=Jm(h,j,y),_!==null&&(To(_,h,y),sv(_,h,y))}function z8(h,y){if(h=h.memoizedState,h!==null&&h.dehydrated!==null){var _=h.retryLane;h.retryLane=_!==0&&_<y?_:y}}function xM(h,y){z8(h,y),(h=h.alternate)&&z8(h,y)}function U8(h){if(h.tag===13||h.tag===31){var y=Zp(h,67108864);y!==null&&To(y,h,67108864),xM(h,67108864)}}function B8(h){if(h.tag===13||h.tag===31){var y=Zo();y=Gt(y);var _=Zp(h,y);_!==null&&To(_,h,y),xM(h,y)}}var G_=!0;function nue(h,y,_,j){var V=re.T;re.T=null;var Z=J.p;try{J.p=2,yM(h,y,_,j)}finally{J.p=Z,re.T=V}}function rue(h,y,_,j){var V=re.T;re.T=null;var Z=J.p;try{J.p=8,yM(h,y,_,j)}finally{J.p=Z,re.T=V}}function yM(h,y,_,j){if(G_){var V=vM(j);if(V===null)iM(h,y,j,W_,_),q8(h,j);else if(iue(V,h,y,_,j))j.stopPropagation();else if(q8(h,j),y&4&&-1<aue.indexOf(h)){for(;V!==null;){var Z=Ae(V);if(Z!==null)switch(Z.tag){case 3:if(Z=Z.stateNode,Z.current.memoizedState.isDehydrated){var Ne=we(Z.pendingLanes);if(Ne!==0){var qe=Z;for(qe.pendingLanes|=2,qe.entangledLanes|=2;Ne;){var lt=1<<31-Oe(Ne);qe.entanglements[1]|=lt,Ne&=~lt}ud(Z),(Ir&6)===0&&(A_=L()+500,Sv(0))}}break;case 31:case 13:qe=Zp(Z,2),qe!==null&&To(qe,Z,2),M_(),xM(Z,2)}if(Z=vM(j),Z===null&&iM(h,y,j,W_,_),Z===V)break;V=Z}V!==null&&j.stopPropagation()}else iM(h,y,j,null,_)}}function vM(h){return h=vo(h),wM(h)}var W_=null;function wM(h){if(W_=null,h=dt(h),h!==null){var y=s(h);if(y===null)h=null;else{var _=y.tag;if(_===13){if(h=o(y),h!==null)return h;h=null}else if(_===31){if(h=l(y),h!==null)return h;h=null}else if(_===3){if(y.stateNode.current.memoizedState.isDehydrated)return y.tag===3?y.stateNode.containerInfo:null;h=null}else y!==h&&(h=null)}}return W_=h,null}function H8(h){switch(h){case"beforetoggle":case"cancel":case"click":case"close":case"contextmenu":case"copy":case"cut":case"auxclick":case"dblclick":case"dragend":case"dragstart":case"drop":case"focusin":case"focusout":case"input":case"invalid":case"keydown":case"keypress":case"keyup":case"mousedown":case"mouseup":case"paste":case"pause":case"play":case"pointercancel":case"pointerdown":case"pointerup":case"ratechange":case"reset":case"resize":case"seeked":case"submit":case"toggle":case"touchcancel":case"touchend":case"touchstart":case"volumechange":case"change":case"selectionchange":case"textInput":case"compositionstart":case"compositionend":case"compositionupdate":case"beforeblur":case"afterblur":case"beforeinput":case"blur":case"fullscreenchange":case"focus":case"hashchange":case"popstate":case"select":case"selectstart":return 2;case"drag":case"dragenter":case"dragexit":case"dragleave":case"dragover":case"mousemove":case"mouseout":case"mouseover":case"pointermove":case"pointerout":case"pointerover":case"scroll":case"touchmove":case"wheel":case"mouseenter":case"mouseleave":case"pointerenter":case"pointerleave":return 8;case"message":switch(ee()){case ge:return 2;case ke:return 8;case je:case Te:return 32;case xe:return 268435456;default:return 32}default:return 32}}var SM=!1,ch=null,dh=null,uh=null,Av=new Map,jv=new Map,mh=[],aue="mousedown mouseup touchcancel touchend touchstart auxclick dblclick pointercancel pointerdown pointerup dragend dragstart drop compositionend compositionstart keydown keypress keyup input textInput copy cut paste click change contextmenu reset".split(" ");function q8(h,y){switch(h){case"focusin":case"focusout":ch=null;break;case"dragenter":case"dragleave":dh=null;break;case"mouseover":case"mouseout":uh=null;break;case"pointerover":case"pointerout":Av.delete(y.pointerId);break;case"gotpointercapture":case"lostpointercapture":jv.delete(y.pointerId)}}function Mv(h,y,_,j,V,Z){return h===null||h.nativeEvent!==Z?(h={blockedOn:y,domEventName:_,eventSystemFlags:j,nativeEvent:Z,targetContainers:[V]},y!==null&&(y=Ae(y),y!==null&&U8(y)),h):(h.eventSystemFlags|=j,y=h.targetContainers,V!==null&&y.indexOf(V)===-1&&y.push(V),h)}function iue(h,y,_,j,V){switch(y){case"focusin":return ch=Mv(ch,h,y,_,j,V),!0;case"dragenter":return dh=Mv(dh,h,y,_,j,V),!0;case"mouseover":return uh=Mv(uh,h,y,_,j,V),!0;case"pointerover":var Z=V.pointerId;return Av.set(Z,Mv(Av.get(Z)||null,h,y,_,j,V)),!0;case"gotpointercapture":return Z=V.pointerId,jv.set(Z,Mv(jv.get(Z)||null,h,y,_,j,V)),!0}return!1}function $8(h){var y=dt(h.target);if(y!==null){var _=s(y);if(_!==null){if(y=_.tag,y===13){if(y=o(_),y!==null){h.blockedOn=y,mn(h.priority,function(){B8(_)});return}}else if(y===31){if(y=l(_),y!==null){h.blockedOn=y,mn(h.priority,function(){B8(_)});return}}else if(y===3&&_.stateNode.current.memoizedState.isDehydrated){h.blockedOn=_.tag===3?_.stateNode.containerInfo:null;return}}}h.blockedOn=null}function K_(h){if(h.blockedOn!==null)return!1;for(var y=h.targetContainers;0<y.length;){var _=vM(h.nativeEvent);if(_===null){_=h.nativeEvent;var j=new _.constructor(_.type,_);Ms=j,_.target.dispatchEvent(j),Ms=null}else return y=Ae(_),y!==null&&U8(y),h.blockedOn=_,!1;y.shift()}return!0}function V8(h,y,_){K_(h)&&_.delete(y)}function sue(){SM=!1,ch!==null&&K_(ch)&&(ch=null),dh!==null&&K_(dh)&&(dh=null),uh!==null&&K_(uh)&&(uh=null),Av.forEach(V8),jv.forEach(V8)}function X_(h,y){h.blockedOn===y&&(h.blockedOn=null,SM||(SM=!0,t.unstable_scheduleCallback(t.unstable_NormalPriority,sue)))}var Y_=null;function G8(h){Y_!==h&&(Y_=h,t.unstable_scheduleCallback(t.unstable_NormalPriority,function(){Y_===h&&(Y_=null);for(var y=0;y<h.length;y+=3){var _=h[y],j=h[y+1],V=h[y+2];if(typeof j!="function"){if(wM(j||_)===null)continue;break}var Z=Ae(_);Z!==null&&(h.splice(y,3),y-=3,vj(Z,{pending:!0,data:V,method:_.method,action:j},j,V))}}))}function Tb(h){function y(lt){return X_(lt,h)}ch!==null&&X_(ch,h),dh!==null&&X_(dh,h),uh!==null&&X_(uh,h),Av.forEach(y),jv.forEach(y);for(var _=0;_<mh.length;_++){var j=mh[_];j.blockedOn===h&&(j.blockedOn=null)}for(;0<mh.length&&(_=mh[0],_.blockedOn===null);)$8(_),_.blockedOn===null&&mh.shift();if(_=(h.ownerDocument||h).$$reactFormReplay,_!=null)for(j=0;j<_.length;j+=3){var V=_[j],Z=_[j+1],Ne=V[Jt]||null;if(typeof Z=="function")Ne||G8(_);else if(Ne){var qe=null;if(Z&&Z.hasAttribute("formAction")){if(V=Z,Ne=Z[Jt]||null)qe=Ne.formAction;else if(wM(V)!==null)continue}else qe=Ne.action;typeof qe=="function"?_[j+1]=qe:(_.splice(j,3),j-=3),G8(_)}}}function W8(){function h(Z){Z.canIntercept&&Z.info==="react-transition"&&Z.intercept({handler:function(){return new Promise(function(Ne){return V=Ne})},focusReset:"manual",scroll:"manual"})}function y(){V!==null&&(V(),V=null),j||setTimeout(_,20)}function _(){if(!j&&!navigation.transition){var Z=navigation.currentEntry;Z&&Z.url!=null&&navigation.navigate(Z.url,{state:Z.getState(),info:"react-transition",history:"replace"})}}if(typeof navigation=="object"){var j=!1,V=null;return navigation.addEventListener("navigate",h),navigation.addEventListener("navigatesuccess",y),navigation.addEventListener("navigateerror",y),setTimeout(_,100),function(){j=!0,navigation.removeEventListener("navigate",h),navigation.removeEventListener("navigatesuccess",y),navigation.removeEventListener("navigateerror",y),V!==null&&(V(),V=null)}}}function _M(h){this._internalRoot=h}Q_.prototype.render=_M.prototype.render=function(h){var y=this._internalRoot;if(y===null)throw Error(r(409));var _=y.current,j=Zo();O8(_,j,h,y,null,null)},Q_.prototype.unmount=_M.prototype.unmount=function(){var h=this._internalRoot;if(h!==null){this._internalRoot=null;var y=h.containerInfo;O8(h.current,2,null,h,null,null),M_(),y[zt]=null}};function Q_(h){this._internalRoot=h}Q_.prototype.unstable_scheduleHydration=function(h){if(h){var y=an();h={blockedOn:null,target:h,priority:y};for(var _=0;_<mh.length&&y!==0&&y<mh[_].priority;_++);mh.splice(_,0,h),_===0&&$8(h)}};var K8=e.version;if(K8!=="19.2.4")throw Error(r(527,K8,"19.2.4"));J.findDOMNode=function(h){var y=h._reactInternals;if(y===void 0)throw typeof h.render=="function"?Error(r(188)):(h=Object.keys(h).join(","),Error(r(268,h)));return h=d(y),h=h!==null?u(h):null,h=h===null?null:h.stateNode,h};var oue={bundleType:0,version:"19.2.4",rendererPackageName:"react-dom",currentDispatcherRef:re,reconcilerVersion:"19.2.4"};if(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__<"u"){var J_=__REACT_DEVTOOLS_GLOBAL_HOOK__;if(!J_.isDisabled&&J_.supportsFiber)try{Ce=J_.inject(oue),ze=J_}catch{}}return Dv.createRoot=function(h,y){if(!i(h))throw Error(r(299));var _=!1,j="",V=tB,Z=nB,Ne=rB;return y!=null&&(y.unstable_strictMode===!0&&(_=!0),y.identifierPrefix!==void 0&&(j=y.identifierPrefix),y.onUncaughtError!==void 0&&(V=y.onUncaughtError),y.onCaughtError!==void 0&&(Z=y.onCaughtError),y.onRecoverableError!==void 0&&(Ne=y.onRecoverableError)),y=L8(h,1,!1,null,null,_,j,null,V,Z,Ne,W8),h[zt]=y.current,aM(h),new _M(y)},Dv.hydrateRoot=function(h,y,_){if(!i(h))throw Error(r(299));var j=!1,V="",Z=tB,Ne=nB,qe=rB,lt=null;return _!=null&&(_.unstable_strictMode===!0&&(j=!0),_.identifierPrefix!==void 0&&(V=_.identifierPrefix),_.onUncaughtError!==void 0&&(Z=_.onUncaughtError),_.onCaughtError!==void 0&&(Ne=_.onCaughtError),_.onRecoverableError!==void 0&&(qe=_.onRecoverableError),_.formState!==void 0&&(lt=_.formState)),y=L8(h,1,!0,y,_??null,j,V,lt,Z,Ne,qe,W8),y.context=I8(null),_=y.current,j=Zo(),j=Gt(j),V=Qm(j),V.callback=null,Jm(_,V,j),_=j,y.current.lanes=_,at(y,_),ud(y),h[zt]=y.current,aM(h),new Q_(y)},Dv.version="19.2.4",Dv}var aH;function xue(){if(aH)return CM.exports;aH=1;function t(){if(!(typeof __REACT_DEVTOOLS_GLOBAL_HOOK__>"u"||typeof __REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE!="function"))try{__REACT_DEVTOOLS_GLOBAL_HOOK__.checkDCE(t)}catch(e){console.error(e)}}return t(),CM.exports=bue(),CM.exports}var yue=xue();const Bn=t=>typeof t=="string",Fv=()=>{let t,e;const n=new Promise((r,i)=>{t=r,e=i});return n.resolve=t,n.reject=e,n},iH=t=>t==null?"":""+t,vue=(t,e,n)=>{t.forEach(r=>{e[r]&&(n[r]=e[r])})},wue=/###/g,sH=t=>t&&t.indexOf("###")>-1?t.replace(wue,"."):t,oH=t=>!t||Bn(t),M0=(t,e,n)=>{const r=Bn(e)?e.split("."):e;let i=0;for(;i<r.length-1;){if(oH(t))return{};const s=sH(r[i]);!t[s]&&n&&(t[s]=new n),Object.prototype.hasOwnProperty.call(t,s)?t=t[s]:t={},++i}return oH(t)?{}:{obj:t,k:sH(r[i])}},lH=(t,e,n)=>{const{obj:r,k:i}=M0(t,e,Object);if(r!==void 0||e.length===1){r[i]=n;return}let s=e[e.length-1],o=e.slice(0,e.length-1),l=M0(t,o,Object);for(;l.obj===void 0&&o.length;)s=`${o[o.length-1]}.${s}`,o=o.slice(0,o.length-1),l=M0(t,o,Object),l?.obj&&typeof l.obj[`${l.k}.${s}`]<"u"&&(l.obj=void 0);l.obj[`${l.k}.${s}`]=n},Sue=(t,e,n,r)=>{const{obj:i,k:s}=M0(t,e,Object);i[s]=i[s]||[],i[s].push(n)},yN=(t,e)=>{const{obj:n,k:r}=M0(t,e);if(n&&Object.prototype.hasOwnProperty.call(n,r))return n[r]},_ue=(t,e,n)=>{const r=yN(t,n);return r!==void 0?r:yN(e,n)},uQ=(t,e,n)=>{for(const r in e)r!=="__proto__"&&r!=="constructor"&&(r in t?Bn(t[r])||t[r]instanceof String||Bn(e[r])||e[r]instanceof String?n&&(t[r]=e[r]):uQ(t[r],e[r],n):t[r]=e[r]);return t},Ab=t=>t.replace(/[\-\[\]\/\{\}\(\)\*\+\?\.\\\^\$\|]/g,"\\$&");var kue={"&":"&amp;","<":"&lt;",">":"&gt;",'"':"&quot;","'":"&#39;","/":"&#x2F;"};const Nue=t=>Bn(t)?t.replace(/[&<>"'\/]/g,e=>kue[e]):t;class Cue{constructor(e){this.capacity=e,this.regExpMap=new Map,this.regExpQueue=[]}getRegExp(e){const n=this.regExpMap.get(e);if(n!==void 0)return n;const r=new RegExp(e);return this.regExpQueue.length===this.capacity&&this.regExpMap.delete(this.regExpQueue.shift()),this.regExpMap.set(e,r),this.regExpQueue.push(e),r}}const Pue=[" ",",","?","!",";"],Tue=new Cue(20),Aue=(t,e,n)=>{e=e||"",n=n||"";const r=Pue.filter(o=>e.indexOf(o)<0&&n.indexOf(o)<0);if(r.length===0)return!0;const i=Tue.getRegExp(`(${r.map(o=>o==="?"?"\\?":o).join("|")})`);let s=!i.test(t);if(!s){const o=t.indexOf(n);o>0&&!i.test(t.substring(0,o))&&(s=!0)}return s},nF=(t,e,n=".")=>{if(!t)return;if(t[e])return Object.prototype.hasOwnProperty.call(t,e)?t[e]:void 0;const r=e.split(n);let i=t;for(let s=0;s<r.length;){if(!i||typeof i!="object")return;let o,l="";for(let c=s;c<r.length;++c)if(c!==s&&(l+=n),l+=r[c],o=i[l],o!==void 0){if(["string","number","boolean"].indexOf(typeof o)>-1&&c<r.length-1)continue;s+=c-s+1;break}i=o}return i},iw=t=>t?.replace("_","-"),jue={type:"logger",log(t){this.output("log",t)},warn(t){this.output("warn",t)},error(t){this.output("error",t)},output(t,e){console?.[t]?.apply?.(console,e)}};class vN{constructor(e,n={}){this.init(e,n)}init(e,n={}){this.prefix=n.prefix||"i18next:",this.logger=e||jue,this.options=n,this.debug=n.debug}log(...e){return this.forward(e,"log","",!0)}warn(...e){return this.forward(e,"warn","",!0)}error(...e){return this.forward(e,"error","")}deprecate(...e){return this.forward(e,"warn","WARNING DEPRECATED: ",!0)}forward(e,n,r,i){return i&&!this.debug?null:(Bn(e[0])&&(e[0]=`${r}${this.prefix} ${e[0]}`),this.logger[n](e))}create(e){return new vN(this.logger,{prefix:`${this.prefix}:${e}:`,...this.options})}clone(e){return e=e||this.options,e.prefix=e.prefix||this.prefix,new vN(this.logger,e)}}var jd=new vN;let KP=class{constructor(){this.observers={}}on(e,n){return e.split(" ").forEach(r=>{this.observers[r]||(this.observers[r]=new Map);const i=this.observers[r].get(n)||0;this.observers[r].set(n,i+1)}),this}off(e,n){if(this.observers[e]){if(!n){delete this.observers[e];return}this.observers[e].delete(n)}}emit(e,...n){this.observers[e]&&Array.from(this.observers[e].entries()).forEach(([i,s])=>{for(let o=0;o<s;o++)i(...n)}),this.observers["*"]&&Array.from(this.observers["*"].entries()).forEach(([i,s])=>{for(let o=0;o<s;o++)i.apply(i,[e,...n])})}};class cH extends KP{constructor(e,n={ns:["translation"],defaultNS:"translation"}){super(),this.data=e||{},this.options=n,this.options.keySeparator===void 0&&(this.options.keySeparator="."),this.options.ignoreJSONStructure===void 0&&(this.options.ignoreJSONStructure=!0)}addNamespaces(e){this.options.ns.indexOf(e)<0&&this.options.ns.push(e)}removeNamespaces(e){const n=this.options.ns.indexOf(e);n>-1&&this.options.ns.splice(n,1)}getResource(e,n,r,i={}){const s=i.keySeparator!==void 0?i.keySeparator:this.options.keySeparator,o=i.ignoreJSONStructure!==void 0?i.ignoreJSONStructure:this.options.ignoreJSONStructure;let l;e.indexOf(".")>-1?l=e.split("."):(l=[e,n],r&&(Array.isArray(r)?l.push(...r):Bn(r)&&s?l.push(...r.split(s)):l.push(r)));const c=yN(this.data,l);return!c&&!n&&!r&&e.indexOf(".")>-1&&(e=l[0],n=l[1],r=l.slice(2).join(".")),c||!o||!Bn(r)?c:nF(this.data?.[e]?.[n],r,s)}addResource(e,n,r,i,s={silent:!1}){const o=s.keySeparator!==void 0?s.keySeparator:this.options.keySeparator;let l=[e,n];r&&(l=l.concat(o?r.split(o):r)),e.indexOf(".")>-1&&(l=e.split("."),i=n,n=l[1]),this.addNamespaces(n),lH(this.data,l,i),s.silent||this.emit("added",e,n,r,i)}addResources(e,n,r,i={silent:!1}){for(const s in r)(Bn(r[s])||Array.isArray(r[s]))&&this.addResource(e,n,s,r[s],{silent:!0});i.silent||this.emit("added",e,n,r)}addResourceBundle(e,n,r,i,s,o={silent:!1,skipCopy:!1}){let l=[e,n];e.indexOf(".")>-1&&(l=e.split("."),i=r,r=n,n=l[1]),this.addNamespaces(n);let c=yN(this.data,l)||{};o.skipCopy||(r=JSON.parse(JSON.stringify(r))),i?uQ(c,r,s):c={...c,...r},lH(this.data,l,c),o.silent||this.emit("added",e,n,r)}removeResourceBundle(e,n){this.hasResourceBundle(e,n)&&delete this.data[e][n],this.removeNamespaces(n),this.emit("removed",e,n)}hasResourceBundle(e,n){return this.getResource(e,n)!==void 0}getResourceBundle(e,n){return n||(n=this.options.defaultNS),this.getResource(e,n)}getDataByLanguage(e){return this.data[e]}hasLanguageSomeTranslations(e){const n=this.getDataByLanguage(e);return!!(n&&Object.keys(n)||[]).find(i=>n[i]&&Object.keys(n[i]).length>0)}toJSON(){return this.data}}var mQ={processors:{},addPostProcessor(t){this.processors[t.name]=t},handle(t,e,n,r,i){return t.forEach(s=>{e=this.processors[s]?.process(e,n,r,i)??e}),e}};const hQ=Symbol("i18next/PATH_KEY");function Mue(){const t=[],e=Object.create(null);let n;return e.get=(r,i)=>(n?.revoke?.(),i===hQ?t:(t.push(i),n=Proxy.revocable(r,e),n.proxy)),Proxy.revocable(Object.create(null),e).proxy}function rF(t,e){const{[hQ]:n}=t(Mue());return n.join(e?.keySeparator??".")}const dH={},jM=t=>!Bn(t)&&typeof t!="boolean"&&typeof t!="number";class wN extends KP{constructor(e,n={}){super(),vue(["resourceStore","languageUtils","pluralResolver","interpolator","backendConnector","i18nFormat","utils"],e,this),this.options=n,this.options.keySeparator===void 0&&(this.options.keySeparator="."),this.logger=jd.create("translator")}changeLanguage(e){e&&(this.language=e)}exists(e,n={interpolation:{}}){const r={...n};if(e==null)return!1;const i=this.resolve(e,r);if(i?.res===void 0)return!1;const s=jM(i.res);return!(r.returnObjects===!1&&s)}extractFromKey(e,n){let r=n.nsSeparator!==void 0?n.nsSeparator:this.options.nsSeparator;r===void 0&&(r=":");const i=n.keySeparator!==void 0?n.keySeparator:this.options.keySeparator;let s=n.ns||this.options.defaultNS||[];const o=r&&e.indexOf(r)>-1,l=!this.options.userDefinedKeySeparator&&!n.keySeparator&&!this.options.userDefinedNsSeparator&&!n.nsSeparator&&!Aue(e,r,i);if(o&&!l){const c=e.match(this.interpolator.nestingRegexp);if(c&&c.length>0)return{key:e,namespaces:Bn(s)?[s]:s};const d=e.split(r);(r!==i||r===i&&this.options.ns.indexOf(d[0])>-1)&&(s=d.shift()),e=d.join(i)}return{key:e,namespaces:Bn(s)?[s]:s}}translate(e,n,r){let i=typeof n=="object"?{...n}:n;if(typeof i!="object"&&this.options.overloadTranslationOptionHandler&&(i=this.options.overloadTranslationOptionHandler(arguments)),typeof i=="object"&&(i={...i}),i||(i={}),e==null)return"";typeof e=="function"&&(e=rF(e,{...this.options,...i})),Array.isArray(e)||(e=[String(e)]);const s=i.returnDetails!==void 0?i.returnDetails:this.options.returnDetails,o=i.keySeparator!==void 0?i.keySeparator:this.options.keySeparator,{key:l,namespaces:c}=this.extractFromKey(e[e.length-1],i),d=c[c.length-1];let u=i.nsSeparator!==void 0?i.nsSeparator:this.options.nsSeparator;u===void 0&&(u=":");const m=i.lng||this.language,p=i.appendNamespaceToCIMode||this.options.appendNamespaceToCIMode;if(m?.toLowerCase()==="cimode")return p?s?{res:`${d}${u}${l}`,usedKey:l,exactUsedKey:l,usedLng:m,usedNS:d,usedParams:this.getUsedParamsDetails(i)}:`${d}${u}${l}`:s?{res:l,usedKey:l,exactUsedKey:l,usedLng:m,usedNS:d,usedParams:this.getUsedParamsDetails(i)}:l;const f=this.resolve(e,i);let x=f?.res;const v=f?.usedKey||l,b=f?.exactUsedKey||l,g=["[object Number]","[object Function]","[object RegExp]"],S=i.joinArrays!==void 0?i.joinArrays:this.options.joinArrays,N=!this.i18nFormat||this.i18nFormat.handleAsObject,P=i.count!==void 0&&!Bn(i.count),C=wN.hasDefaultValue(i),A=P?this.pluralResolver.getSuffix(m,i.count,i):"",T=i.ordinal&&P?this.pluralResolver.getSuffix(m,i.count,{ordinal:!1}):"",F=P&&!i.ordinal&&i.count===0,k=F&&i[`defaultValue${this.options.pluralSeparator}zero`]||i[`defaultValue${A}`]||i[`defaultValue${T}`]||i.defaultValue;let E=x;N&&!x&&C&&(E=k);const $=jM(E),z=Object.prototype.toString.apply(E);if(N&&E&&$&&g.indexOf(z)<0&&!(Bn(S)&&Array.isArray(E))){if(!i.returnObjects&&!this.options.returnObjects){this.options.returnedObjectHandler||this.logger.warn("accessing an object - but returnObjects options is not enabled!");const X=this.options.returnedObjectHandler?this.options.returnedObjectHandler(v,E,{...i,ns:c}):`key '${l} (${this.language})' returned an object instead of string.`;return s?(f.res=X,f.usedParams=this.getUsedParamsDetails(i),f):X}if(o){const X=Array.isArray(E),R=X?[]:{},ne=X?b:v;for(const re in E)if(Object.prototype.hasOwnProperty.call(E,re)){const J=`${ne}${o}${re}`;C&&!x?R[re]=this.translate(J,{...i,defaultValue:jM(k)?k[re]:void 0,joinArrays:!1,ns:c}):R[re]=this.translate(J,{...i,joinArrays:!1,ns:c}),R[re]===J&&(R[re]=E[re])}x=R}}else if(N&&Bn(S)&&Array.isArray(x))x=x.join(S),x&&(x=this.extendTranslation(x,e,i,r));else{let X=!1,R=!1;!this.isValidLookup(x)&&C&&(X=!0,x=k),this.isValidLookup(x)||(R=!0,x=l);const re=(i.missingKeyNoValueFallbackToKey||this.options.missingKeyNoValueFallbackToKey)&&R?void 0:x,J=C&&k!==x&&this.options.updateMissing;if(R||X||J){if(this.logger.log(J?"updateKey":"missingKey",m,d,l,J?k:x),o){const K=this.resolve(l,{...i,keySeparator:!1});K&&K.res&&this.logger.warn("Seems the loaded translations were in flat JSON format instead of nested. Either set keySeparator: false on init or make sure your translations are published in nested format.")}let ue=[];const ie=this.languageUtils.getFallbackCodes(this.options.fallbackLng,i.lng||this.language);if(this.options.saveMissingTo==="fallback"&&ie&&ie[0])for(let K=0;K<ie.length;K++)ue.push(ie[K]);else this.options.saveMissingTo==="all"?ue=this.languageUtils.toResolveHierarchy(i.lng||this.language):ue.push(i.lng||this.language);const se=(K,ae,pe)=>{const be=C&&pe!==x?pe:re;this.options.missingKeyHandler?this.options.missingKeyHandler(K,d,ae,be,J,i):this.backendConnector?.saveMissing&&this.backendConnector.saveMissing(K,d,ae,be,J,i),this.emit("missingKey",K,d,ae,x)};this.options.saveMissing&&(this.options.saveMissingPlurals&&P?ue.forEach(K=>{const ae=this.pluralResolver.getSuffixes(K,i);F&&i[`defaultValue${this.options.pluralSeparator}zero`]&&ae.indexOf(`${this.options.pluralSeparator}zero`)<0&&ae.push(`${this.options.pluralSeparator}zero`),ae.forEach(pe=>{se([K],l+pe,i[`defaultValue${pe}`]||k)})}):se(ue,l,k))}x=this.extendTranslation(x,e,i,f,r),R&&x===l&&this.options.appendNamespaceToMissingKey&&(x=`${d}${u}${l}`),(R||X)&&this.options.parseMissingKeyHandler&&(x=this.options.parseMissingKeyHandler(this.options.appendNamespaceToMissingKey?`${d}${u}${l}`:l,X?x:void 0,i))}return s?(f.res=x,f.usedParams=this.getUsedParamsDetails(i),f):x}extendTranslation(e,n,r,i,s){if(this.i18nFormat?.parse)e=this.i18nFormat.parse(e,{...this.options.interpolation.defaultVariables,...r},r.lng||this.language||i.usedLng,i.usedNS,i.usedKey,{resolved:i});else if(!r.skipInterpolation){r.interpolation&&this.interpolator.init({...r,interpolation:{...this.options.interpolation,...r.interpolation}});const c=Bn(e)&&(r?.interpolation?.skipOnVariables!==void 0?r.interpolation.skipOnVariables:this.options.interpolation.skipOnVariables);let d;if(c){const m=e.match(this.interpolator.nestingRegexp);d=m&&m.length}let u=r.replace&&!Bn(r.replace)?r.replace:r;if(this.options.interpolation.defaultVariables&&(u={...this.options.interpolation.defaultVariables,...u}),e=this.interpolator.interpolate(e,u,r.lng||this.language||i.usedLng,r),c){const m=e.match(this.interpolator.nestingRegexp),p=m&&m.length;d<p&&(r.nest=!1)}!r.lng&&i&&i.res&&(r.lng=this.language||i.usedLng),r.nest!==!1&&(e=this.interpolator.nest(e,(...m)=>s?.[0]===m[0]&&!r.context?(this.logger.warn(`It seems you are nesting recursively key: ${m[0]} in key: ${n[0]}`),null):this.translate(...m,n),r)),r.interpolation&&this.interpolator.reset()}const o=r.postProcess||this.options.postProcess,l=Bn(o)?[o]:o;return e!=null&&l?.length&&r.applyPostProcessor!==!1&&(e=mQ.handle(l,e,n,this.options&&this.options.postProcessPassResolved?{i18nResolved:{...i,usedParams:this.getUsedParamsDetails(r)},...r}:r,this)),e}resolve(e,n={}){let r,i,s,o,l;return Bn(e)&&(e=[e]),e.forEach(c=>{if(this.isValidLookup(r))return;const d=this.extractFromKey(c,n),u=d.key;i=u;let m=d.namespaces;this.options.fallbackNS&&(m=m.concat(this.options.fallbackNS));const p=n.count!==void 0&&!Bn(n.count),f=p&&!n.ordinal&&n.count===0,x=n.context!==void 0&&(Bn(n.context)||typeof n.context=="number")&&n.context!=="",v=n.lngs?n.lngs:this.languageUtils.toResolveHierarchy(n.lng||this.language,n.fallbackLng);m.forEach(b=>{this.isValidLookup(r)||(l=b,!dH[`${v[0]}-${b}`]&&this.utils?.hasLoadedNamespace&&!this.utils?.hasLoadedNamespace(l)&&(dH[`${v[0]}-${b}`]=!0,this.logger.warn(`key "${i}" for languages "${v.join(", ")}" won't get resolved as namespace "${l}" was not yet loaded`,"This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!")),v.forEach(g=>{if(this.isValidLookup(r))return;o=g;const S=[u];if(this.i18nFormat?.addLookupKeys)this.i18nFormat.addLookupKeys(S,u,g,b,n);else{let P;p&&(P=this.pluralResolver.getSuffix(g,n.count,n));const C=`${this.options.pluralSeparator}zero`,A=`${this.options.pluralSeparator}ordinal${this.options.pluralSeparator}`;if(p&&(n.ordinal&&P.indexOf(A)===0&&S.push(u+P.replace(A,this.options.pluralSeparator)),S.push(u+P),f&&S.push(u+C)),x){const T=`${u}${this.options.contextSeparator||"_"}${n.context}`;S.push(T),p&&(n.ordinal&&P.indexOf(A)===0&&S.push(T+P.replace(A,this.options.pluralSeparator)),S.push(T+P),f&&S.push(T+C))}}let N;for(;N=S.pop();)this.isValidLookup(r)||(s=N,r=this.getResource(g,b,N,n))}))})}),{res:r,usedKey:i,exactUsedKey:s,usedLng:o,usedNS:l}}isValidLookup(e){return e!==void 0&&!(!this.options.returnNull&&e===null)&&!(!this.options.returnEmptyString&&e==="")}getResource(e,n,r,i={}){return this.i18nFormat?.getResource?this.i18nFormat.getResource(e,n,r,i):this.resourceStore.getResource(e,n,r,i)}getUsedParamsDetails(e={}){const n=["defaultValue","ordinal","context","replace","lng","lngs","fallbackLng","ns","keySeparator","nsSeparator","returnObjects","returnDetails","joinArrays","postProcess","interpolation"],r=e.replace&&!Bn(e.replace);let i=r?e.replace:e;if(r&&typeof e.count<"u"&&(i.count=e.count),this.options.interpolation.defaultVariables&&(i={...this.options.interpolation.defaultVariables,...i}),!r){i={...i};for(const s of n)delete i[s]}return i}static hasDefaultValue(e){const n="defaultValue";for(const r in e)if(Object.prototype.hasOwnProperty.call(e,r)&&n===r.substring(0,n.length)&&e[r]!==void 0)return!0;return!1}}class uH{constructor(e){this.options=e,this.supportedLngs=this.options.supportedLngs||!1,this.logger=jd.create("languageUtils")}getScriptPartFromCode(e){if(e=iw(e),!e||e.indexOf("-")<0)return null;const n=e.split("-");return n.length===2||(n.pop(),n[n.length-1].toLowerCase()==="x")?null:this.formatLanguageCode(n.join("-"))}getLanguagePartFromCode(e){if(e=iw(e),!e||e.indexOf("-")<0)return e;const n=e.split("-");return this.formatLanguageCode(n[0])}formatLanguageCode(e){if(Bn(e)&&e.indexOf("-")>-1){let n;try{n=Intl.getCanonicalLocales(e)[0]}catch{}return n&&this.options.lowerCaseLng&&(n=n.toLowerCase()),n||(this.options.lowerCaseLng?e.toLowerCase():e)}return this.options.cleanCode||this.options.lowerCaseLng?e.toLowerCase():e}isSupportedCode(e){return(this.options.load==="languageOnly"||this.options.nonExplicitSupportedLngs)&&(e=this.getLanguagePartFromCode(e)),!this.supportedLngs||!this.supportedLngs.length||this.supportedLngs.indexOf(e)>-1}getBestMatchFromCodes(e){if(!e)return null;let n;return e.forEach(r=>{if(n)return;const i=this.formatLanguageCode(r);(!this.options.supportedLngs||this.isSupportedCode(i))&&(n=i)}),!n&&this.options.supportedLngs&&e.forEach(r=>{if(n)return;const i=this.getScriptPartFromCode(r);if(this.isSupportedCode(i))return n=i;const s=this.getLanguagePartFromCode(r);if(this.isSupportedCode(s))return n=s;n=this.options.supportedLngs.find(o=>{if(o===s)return o;if(!(o.indexOf("-")<0&&s.indexOf("-")<0)&&(o.indexOf("-")>0&&s.indexOf("-")<0&&o.substring(0,o.indexOf("-"))===s||o.indexOf(s)===0&&s.length>1))return o})}),n||(n=this.getFallbackCodes(this.options.fallbackLng)[0]),n}getFallbackCodes(e,n){if(!e)return[];if(typeof e=="function"&&(e=e(n)),Bn(e)&&(e=[e]),Array.isArray(e))return e;if(!n)return e.default||[];let r=e[n];return r||(r=e[this.getScriptPartFromCode(n)]),r||(r=e[this.formatLanguageCode(n)]),r||(r=e[this.getLanguagePartFromCode(n)]),r||(r=e.default),r||[]}toResolveHierarchy(e,n){const r=this.getFallbackCodes((n===!1?[]:n)||this.options.fallbackLng||[],e),i=[],s=o=>{o&&(this.isSupportedCode(o)?i.push(o):this.logger.warn(`rejecting language code not found in supportedLngs: ${o}`))};return Bn(e)&&(e.indexOf("-")>-1||e.indexOf("_")>-1)?(this.options.load!=="languageOnly"&&s(this.formatLanguageCode(e)),this.options.load!=="languageOnly"&&this.options.load!=="currentOnly"&&s(this.getScriptPartFromCode(e)),this.options.load!=="currentOnly"&&s(this.getLanguagePartFromCode(e))):Bn(e)&&s(this.formatLanguageCode(e)),r.forEach(o=>{i.indexOf(o)<0&&s(this.formatLanguageCode(o))}),i}}const mH={zero:0,one:1,two:2,few:3,many:4,other:5},hH={select:t=>t===1?"one":"other",resolvedOptions:()=>({pluralCategories:["one","other"]})};class Eue{constructor(e,n={}){this.languageUtils=e,this.options=n,this.logger=jd.create("pluralResolver"),this.pluralRulesCache={}}addRule(e,n){this.rules[e]=n}clearCache(){this.pluralRulesCache={}}getRule(e,n={}){const r=iw(e==="dev"?"en":e),i=n.ordinal?"ordinal":"cardinal",s=JSON.stringify({cleanedCode:r,type:i});if(s in this.pluralRulesCache)return this.pluralRulesCache[s];let o;try{o=new Intl.PluralRules(r,{type:i})}catch{if(!Intl)return this.logger.error("No Intl support, please use an Intl polyfill!"),hH;if(!e.match(/-|_/))return hH;const c=this.languageUtils.getLanguagePartFromCode(e);o=this.getRule(c,n)}return this.pluralRulesCache[s]=o,o}needsPlural(e,n={}){let r=this.getRule(e,n);return r||(r=this.getRule("dev",n)),r?.resolvedOptions().pluralCategories.length>1}getPluralFormsOfKey(e,n,r={}){return this.getSuffixes(e,r).map(i=>`${n}${i}`)}getSuffixes(e,n={}){let r=this.getRule(e,n);return r||(r=this.getRule("dev",n)),r?r.resolvedOptions().pluralCategories.sort((i,s)=>mH[i]-mH[s]).map(i=>`${this.options.prepend}${n.ordinal?`ordinal${this.options.prepend}`:""}${i}`):[]}getSuffix(e,n,r={}){const i=this.getRule(e,r);return i?`${this.options.prepend}${r.ordinal?`ordinal${this.options.prepend}`:""}${i.select(n)}`:(this.logger.warn(`no plural rule found for: ${e}`),this.getSuffix("dev",n,r))}}const pH=(t,e,n,r=".",i=!0)=>{let s=_ue(t,e,n);return!s&&i&&Bn(n)&&(s=nF(t,n,r),s===void 0&&(s=nF(e,n,r))),s},MM=t=>t.replace(/\$/g,"$$$$");class Due{constructor(e={}){this.logger=jd.create("interpolator"),this.options=e,this.format=e?.interpolation?.format||(n=>n),this.init(e)}init(e={}){e.interpolation||(e.interpolation={escapeValue:!0});const{escape:n,escapeValue:r,useRawValueToEscape:i,prefix:s,prefixEscaped:o,suffix:l,suffixEscaped:c,formatSeparator:d,unescapeSuffix:u,unescapePrefix:m,nestingPrefix:p,nestingPrefixEscaped:f,nestingSuffix:x,nestingSuffixEscaped:v,nestingOptionsSeparator:b,maxReplaces:g,alwaysFormat:S}=e.interpolation;this.escape=n!==void 0?n:Nue,this.escapeValue=r!==void 0?r:!0,this.useRawValueToEscape=i!==void 0?i:!1,this.prefix=s?Ab(s):o||"{{",this.suffix=l?Ab(l):c||"}}",this.formatSeparator=d||",",this.unescapePrefix=u?"":m||"-",this.unescapeSuffix=this.unescapePrefix?"":u||"",this.nestingPrefix=p?Ab(p):f||Ab("$t("),this.nestingSuffix=x?Ab(x):v||Ab(")"),this.nestingOptionsSeparator=b||",",this.maxReplaces=g||1e3,this.alwaysFormat=S!==void 0?S:!1,this.resetRegExp()}reset(){this.options&&this.init(this.options)}resetRegExp(){const e=(n,r)=>n?.source===r?(n.lastIndex=0,n):new RegExp(r,"g");this.regexp=e(this.regexp,`${this.prefix}(.+?)${this.suffix}`),this.regexpUnescape=e(this.regexpUnescape,`${this.prefix}${this.unescapePrefix}(.+?)${this.unescapeSuffix}${this.suffix}`),this.nestingRegexp=e(this.nestingRegexp,`${this.nestingPrefix}((?:[^()"']+|"[^"]*"|'[^']*'|\\((?:[^()]|"[^"]*"|'[^']*')*\\))*?)${this.nestingSuffix}`)}interpolate(e,n,r,i){let s,o,l;const c=this.options&&this.options.interpolation&&this.options.interpolation.defaultVariables||{},d=f=>{if(f.indexOf(this.formatSeparator)<0){const g=pH(n,c,f,this.options.keySeparator,this.options.ignoreJSONStructure);return this.alwaysFormat?this.format(g,void 0,r,{...i,...n,interpolationkey:f}):g}const x=f.split(this.formatSeparator),v=x.shift().trim(),b=x.join(this.formatSeparator).trim();return this.format(pH(n,c,v,this.options.keySeparator,this.options.ignoreJSONStructure),b,r,{...i,...n,interpolationkey:v})};this.resetRegExp();const u=i?.missingInterpolationHandler||this.options.missingInterpolationHandler,m=i?.interpolation?.skipOnVariables!==void 0?i.interpolation.skipOnVariables:this.options.interpolation.skipOnVariables;return[{regex:this.regexpUnescape,safeValue:f=>MM(f)},{regex:this.regexp,safeValue:f=>this.escapeValue?MM(this.escape(f)):MM(f)}].forEach(f=>{for(l=0;s=f.regex.exec(e);){const x=s[1].trim();if(o=d(x),o===void 0)if(typeof u=="function"){const b=u(e,s,i);o=Bn(b)?b:""}else if(i&&Object.prototype.hasOwnProperty.call(i,x))o="";else if(m){o=s[0];continue}else this.logger.warn(`missed to pass in variable ${x} for interpolating ${e}`),o="";else!Bn(o)&&!this.useRawValueToEscape&&(o=iH(o));const v=f.safeValue(o);if(e=e.replace(s[0],v),m?(f.regex.lastIndex+=o.length,f.regex.lastIndex-=s[0].length):f.regex.lastIndex=0,l++,l>=this.maxReplaces)break}}),e}nest(e,n,r={}){let i,s,o;const l=(c,d)=>{const u=this.nestingOptionsSeparator;if(c.indexOf(u)<0)return c;const m=c.split(new RegExp(`${u}[ ]*{`));let p=`{${m[1]}`;c=m[0],p=this.interpolate(p,o);const f=p.match(/'/g),x=p.match(/"/g);((f?.length??0)%2===0&&!x||x.length%2!==0)&&(p=p.replace(/'/g,'"'));try{o=JSON.parse(p),d&&(o={...d,...o})}catch(v){return this.logger.warn(`failed parsing options string in nesting for key ${c}`,v),`${c}${u}${p}`}return o.defaultValue&&o.defaultValue.indexOf(this.prefix)>-1&&delete o.defaultValue,c};for(;i=this.nestingRegexp.exec(e);){let c=[];o={...r},o=o.replace&&!Bn(o.replace)?o.replace:o,o.applyPostProcessor=!1,delete o.defaultValue;const d=/{.*}/.test(i[1])?i[1].lastIndexOf("}")+1:i[1].indexOf(this.formatSeparator);if(d!==-1&&(c=i[1].slice(d).split(this.formatSeparator).map(u=>u.trim()).filter(Boolean),i[1]=i[1].slice(0,d)),s=n(l.call(this,i[1].trim(),o),o),s&&i[0]===e&&!Bn(s))return s;Bn(s)||(s=iH(s)),s||(this.logger.warn(`missed to resolve ${i[1]} for nesting ${e}`),s=""),c.length&&(s=c.reduce((u,m)=>this.format(u,m,r.lng,{...r,interpolationkey:i[1].trim()}),s.trim())),e=e.replace(i[0],s),this.regexp.lastIndex=0}return e}}const Fue=t=>{let e=t.toLowerCase().trim();const n={};if(t.indexOf("(")>-1){const r=t.split("(");e=r[0].toLowerCase().trim();const i=r[1].substring(0,r[1].length-1);e==="currency"&&i.indexOf(":")<0?n.currency||(n.currency=i.trim()):e==="relativetime"&&i.indexOf(":")<0?n.range||(n.range=i.trim()):i.split(";").forEach(o=>{if(o){const[l,...c]=o.split(":"),d=c.join(":").trim().replace(/^'+|'+$/g,""),u=l.trim();n[u]||(n[u]=d),d==="false"&&(n[u]=!1),d==="true"&&(n[u]=!0),isNaN(d)||(n[u]=parseInt(d,10))}})}return{formatName:e,formatOptions:n}},fH=t=>{const e={};return(n,r,i)=>{let s=i;i&&i.interpolationkey&&i.formatParams&&i.formatParams[i.interpolationkey]&&i[i.interpolationkey]&&(s={...s,[i.interpolationkey]:void 0});const o=r+JSON.stringify(s);let l=e[o];return l||(l=t(iw(r),i),e[o]=l),l(n)}},Rue=t=>(e,n,r)=>t(iw(n),r)(e);class Lue{constructor(e={}){this.logger=jd.create("formatter"),this.options=e,this.init(e)}init(e,n={interpolation:{}}){this.formatSeparator=n.interpolation.formatSeparator||",";const r=n.cacheInBuiltFormats?fH:Rue;this.formats={number:r((i,s)=>{const o=new Intl.NumberFormat(i,{...s});return l=>o.format(l)}),currency:r((i,s)=>{const o=new Intl.NumberFormat(i,{...s,style:"currency"});return l=>o.format(l)}),datetime:r((i,s)=>{const o=new Intl.DateTimeFormat(i,{...s});return l=>o.format(l)}),relativetime:r((i,s)=>{const o=new Intl.RelativeTimeFormat(i,{...s});return l=>o.format(l,s.range||"day")}),list:r((i,s)=>{const o=new Intl.ListFormat(i,{...s});return l=>o.format(l)})}}add(e,n){this.formats[e.toLowerCase().trim()]=n}addCached(e,n){this.formats[e.toLowerCase().trim()]=fH(n)}format(e,n,r,i={}){const s=n.split(this.formatSeparator);if(s.length>1&&s[0].indexOf("(")>1&&s[0].indexOf(")")<0&&s.find(l=>l.indexOf(")")>-1)){const l=s.findIndex(c=>c.indexOf(")")>-1);s[0]=[s[0],...s.splice(1,l)].join(this.formatSeparator)}return s.reduce((l,c)=>{const{formatName:d,formatOptions:u}=Fue(c);if(this.formats[d]){let m=l;try{const p=i?.formatParams?.[i.interpolationkey]||{},f=p.locale||p.lng||i.locale||i.lng||r;m=this.formats[d](l,f,{...u,...i,...p})}catch(p){this.logger.warn(p)}return m}else this.logger.warn(`there was no format function for ${d}`);return l},e)}}const Iue=(t,e)=>{t.pending[e]!==void 0&&(delete t.pending[e],t.pendingCount--)};class Oue extends KP{constructor(e,n,r,i={}){super(),this.backend=e,this.store=n,this.services=r,this.languageUtils=r.languageUtils,this.options=i,this.logger=jd.create("backendConnector"),this.waitingReads=[],this.maxParallelReads=i.maxParallelReads||10,this.readingCalls=0,this.maxRetries=i.maxRetries>=0?i.maxRetries:5,this.retryTimeout=i.retryTimeout>=1?i.retryTimeout:350,this.state={},this.queue=[],this.backend?.init?.(r,i.backend,i)}queueLoad(e,n,r,i){const s={},o={},l={},c={};return e.forEach(d=>{let u=!0;n.forEach(m=>{const p=`${d}|${m}`;!r.reload&&this.store.hasResourceBundle(d,m)?this.state[p]=2:this.state[p]<0||(this.state[p]===1?o[p]===void 0&&(o[p]=!0):(this.state[p]=1,u=!1,o[p]===void 0&&(o[p]=!0),s[p]===void 0&&(s[p]=!0),c[m]===void 0&&(c[m]=!0)))}),u||(l[d]=!0)}),(Object.keys(s).length||Object.keys(o).length)&&this.queue.push({pending:o,pendingCount:Object.keys(o).length,loaded:{},errors:[],callback:i}),{toLoad:Object.keys(s),pending:Object.keys(o),toLoadLanguages:Object.keys(l),toLoadNamespaces:Object.keys(c)}}loaded(e,n,r){const i=e.split("|"),s=i[0],o=i[1];n&&this.emit("failedLoading",s,o,n),!n&&r&&this.store.addResourceBundle(s,o,r,void 0,void 0,{skipCopy:!0}),this.state[e]=n?-1:2,n&&r&&(this.state[e]=0);const l={};this.queue.forEach(c=>{Sue(c.loaded,[s],o),Iue(c,e),n&&c.errors.push(n),c.pendingCount===0&&!c.done&&(Object.keys(c.loaded).forEach(d=>{l[d]||(l[d]={});const u=c.loaded[d];u.length&&u.forEach(m=>{l[d][m]===void 0&&(l[d][m]=!0)})}),c.done=!0,c.errors.length?c.callback(c.errors):c.callback())}),this.emit("loaded",l),this.queue=this.queue.filter(c=>!c.done)}read(e,n,r,i=0,s=this.retryTimeout,o){if(!e.length)return o(null,{});if(this.readingCalls>=this.maxParallelReads){this.waitingReads.push({lng:e,ns:n,fcName:r,tried:i,wait:s,callback:o});return}this.readingCalls++;const l=(d,u)=>{if(this.readingCalls--,this.waitingReads.length>0){const m=this.waitingReads.shift();this.read(m.lng,m.ns,m.fcName,m.tried,m.wait,m.callback)}if(d&&u&&i<this.maxRetries){setTimeout(()=>{this.read.call(this,e,n,r,i+1,s*2,o)},s);return}o(d,u)},c=this.backend[r].bind(this.backend);if(c.length===2){try{const d=c(e,n);d&&typeof d.then=="function"?d.then(u=>l(null,u)).catch(l):l(null,d)}catch(d){l(d)}return}return c(e,n,l)}prepareLoading(e,n,r={},i){if(!this.backend)return this.logger.warn("No backend was added via i18next.use. Will not load resources."),i&&i();Bn(e)&&(e=this.languageUtils.toResolveHierarchy(e)),Bn(n)&&(n=[n]);const s=this.queueLoad(e,n,r,i);if(!s.toLoad.length)return s.pending.length||i(),null;s.toLoad.forEach(o=>{this.loadOne(o)})}load(e,n,r){this.prepareLoading(e,n,{},r)}reload(e,n,r){this.prepareLoading(e,n,{reload:!0},r)}loadOne(e,n=""){const r=e.split("|"),i=r[0],s=r[1];this.read(i,s,"read",void 0,void 0,(o,l)=>{o&&this.logger.warn(`${n}loading namespace ${s} for language ${i} failed`,o),!o&&l&&this.logger.log(`${n}loaded namespace ${s} for language ${i}`,l),this.loaded(e,o,l)})}saveMissing(e,n,r,i,s,o={},l=()=>{}){if(this.services?.utils?.hasLoadedNamespace&&!this.services?.utils?.hasLoadedNamespace(n)){this.logger.warn(`did not save key "${r}" as the namespace "${n}" was not yet loaded`,"This means something IS WRONG in your setup. You access the t function before i18next.init / i18next.loadNamespace / i18next.changeLanguage was done. Wait for the callback or Promise to resolve before accessing it!!!");return}if(!(r==null||r==="")){if(this.backend?.create){const c={...o,isUpdate:s},d=this.backend.create.bind(this.backend);if(d.length<6)try{let u;d.length===5?u=d(e,n,r,i,c):u=d(e,n,r,i),u&&typeof u.then=="function"?u.then(m=>l(null,m)).catch(l):l(null,u)}catch(u){l(u)}else d(e,n,r,i,l,c)}!e||!e[0]||this.store.addResource(e[0],n,r,i)}}}const gH=()=>({debug:!1,initAsync:!0,ns:["translation"],defaultNS:["translation"],fallbackLng:["dev"],fallbackNS:!1,supportedLngs:!1,nonExplicitSupportedLngs:!1,load:"all",preload:!1,simplifyPluralSuffix:!0,keySeparator:".",nsSeparator:":",pluralSeparator:"_",contextSeparator:"_",partialBundledLanguages:!1,saveMissing:!1,updateMissing:!1,saveMissingTo:"fallback",saveMissingPlurals:!0,missingKeyHandler:!1,missingInterpolationHandler:!1,postProcess:!1,postProcessPassResolved:!1,returnNull:!1,returnEmptyString:!0,returnObjects:!1,joinArrays:!1,returnedObjectHandler:!1,parseMissingKeyHandler:!1,appendNamespaceToMissingKey:!1,appendNamespaceToCIMode:!1,overloadTranslationOptionHandler:t=>{let e={};if(typeof t[1]=="object"&&(e=t[1]),Bn(t[1])&&(e.defaultValue=t[1]),Bn(t[2])&&(e.tDescription=t[2]),typeof t[2]=="object"||typeof t[3]=="object"){const n=t[3]||t[2];Object.keys(n).forEach(r=>{e[r]=n[r]})}return e},interpolation:{escapeValue:!0,format:t=>t,prefix:"{{",suffix:"}}",formatSeparator:",",unescapePrefix:"-",nestingPrefix:"$t(",nestingSuffix:")",nestingOptionsSeparator:",",maxReplaces:1e3,skipOnVariables:!0},cacheInBuiltFormats:!0}),bH=t=>(Bn(t.ns)&&(t.ns=[t.ns]),Bn(t.fallbackLng)&&(t.fallbackLng=[t.fallbackLng]),Bn(t.fallbackNS)&&(t.fallbackNS=[t.fallbackNS]),t.supportedLngs?.indexOf?.("cimode")<0&&(t.supportedLngs=t.supportedLngs.concat(["cimode"])),typeof t.initImmediate=="boolean"&&(t.initAsync=t.initImmediate),t),e1=()=>{},zue=t=>{Object.getOwnPropertyNames(Object.getPrototypeOf(t)).forEach(n=>{typeof t[n]=="function"&&(t[n]=t[n].bind(t))})};class E0 extends KP{constructor(e={},n){if(super(),this.options=bH(e),this.services={},this.logger=jd,this.modules={external:[]},zue(this),n&&!this.isInitialized&&!e.isClone){if(!this.options.initAsync)return this.init(e,n),this;setTimeout(()=>{this.init(e,n)},0)}}init(e={},n){this.isInitializing=!0,typeof e=="function"&&(n=e,e={}),e.defaultNS==null&&e.ns&&(Bn(e.ns)?e.defaultNS=e.ns:e.ns.indexOf("translation")<0&&(e.defaultNS=e.ns[0]));const r=gH();this.options={...r,...this.options,...bH(e)},this.options.interpolation={...r.interpolation,...this.options.interpolation},e.keySeparator!==void 0&&(this.options.userDefinedKeySeparator=e.keySeparator),e.nsSeparator!==void 0&&(this.options.userDefinedNsSeparator=e.nsSeparator);const i=d=>d?typeof d=="function"?new d:d:null;if(!this.options.isClone){this.modules.logger?jd.init(i(this.modules.logger),this.options):jd.init(null,this.options);let d;this.modules.formatter?d=this.modules.formatter:d=Lue;const u=new uH(this.options);this.store=new cH(this.options.resources,this.options);const m=this.services;m.logger=jd,m.resourceStore=this.store,m.languageUtils=u,m.pluralResolver=new Eue(u,{prepend:this.options.pluralSeparator,simplifyPluralSuffix:this.options.simplifyPluralSuffix}),this.options.interpolation.format&&this.options.interpolation.format!==r.interpolation.format&&this.logger.deprecate("init: you are still using the legacy format function, please use the new approach: https://www.i18next.com/translation-function/formatting"),d&&(!this.options.interpolation.format||this.options.interpolation.format===r.interpolation.format)&&(m.formatter=i(d),m.formatter.init&&m.formatter.init(m,this.options),this.options.interpolation.format=m.formatter.format.bind(m.formatter)),m.interpolator=new Due(this.options),m.utils={hasLoadedNamespace:this.hasLoadedNamespace.bind(this)},m.backendConnector=new Oue(i(this.modules.backend),m.resourceStore,m,this.options),m.backendConnector.on("*",(f,...x)=>{this.emit(f,...x)}),this.modules.languageDetector&&(m.languageDetector=i(this.modules.languageDetector),m.languageDetector.init&&m.languageDetector.init(m,this.options.detection,this.options)),this.modules.i18nFormat&&(m.i18nFormat=i(this.modules.i18nFormat),m.i18nFormat.init&&m.i18nFormat.init(this)),this.translator=new wN(this.services,this.options),this.translator.on("*",(f,...x)=>{this.emit(f,...x)}),this.modules.external.forEach(f=>{f.init&&f.init(this)})}if(this.format=this.options.interpolation.format,n||(n=e1),this.options.fallbackLng&&!this.services.languageDetector&&!this.options.lng){const d=this.services.languageUtils.getFallbackCodes(this.options.fallbackLng);d.length>0&&d[0]!=="dev"&&(this.options.lng=d[0])}!this.services.languageDetector&&!this.options.lng&&this.logger.warn("init: no languageDetector is used and no lng is defined"),["getResource","hasResourceBundle","getResourceBundle","getDataByLanguage"].forEach(d=>{this[d]=(...u)=>this.store[d](...u)}),["addResource","addResources","addResourceBundle","removeResourceBundle"].forEach(d=>{this[d]=(...u)=>(this.store[d](...u),this)});const l=Fv(),c=()=>{const d=(u,m)=>{this.isInitializing=!1,this.isInitialized&&!this.initializedStoreOnce&&this.logger.warn("init: i18next is already initialized. You should call init just once!"),this.isInitialized=!0,this.options.isClone||this.logger.log("initialized",this.options),this.emit("initialized",this.options),l.resolve(m),n(u,m)};if(this.languages&&!this.isInitialized)return d(null,this.t.bind(this));this.changeLanguage(this.options.lng,d)};return this.options.resources||!this.options.initAsync?c():setTimeout(c,0),l}loadResources(e,n=e1){let r=n;const i=Bn(e)?e:this.language;if(typeof e=="function"&&(r=e),!this.options.resources||this.options.partialBundledLanguages){if(i?.toLowerCase()==="cimode"&&(!this.options.preload||this.options.preload.length===0))return r();const s=[],o=l=>{if(!l||l==="cimode")return;this.services.languageUtils.toResolveHierarchy(l).forEach(d=>{d!=="cimode"&&s.indexOf(d)<0&&s.push(d)})};i?o(i):this.services.languageUtils.getFallbackCodes(this.options.fallbackLng).forEach(c=>o(c)),this.options.preload?.forEach?.(l=>o(l)),this.services.backendConnector.load(s,this.options.ns,l=>{!l&&!this.resolvedLanguage&&this.language&&this.setResolvedLanguage(this.language),r(l)})}else r(null)}reloadResources(e,n,r){const i=Fv();return typeof e=="function"&&(r=e,e=void 0),typeof n=="function"&&(r=n,n=void 0),e||(e=this.languages),n||(n=this.options.ns),r||(r=e1),this.services.backendConnector.reload(e,n,s=>{i.resolve(),r(s)}),i}use(e){if(!e)throw new Error("You are passing an undefined module! Please check the object you are passing to i18next.use()");if(!e.type)throw new Error("You are passing a wrong module! Please check the object you are passing to i18next.use()");return e.type==="backend"&&(this.modules.backend=e),(e.type==="logger"||e.log&&e.warn&&e.error)&&(this.modules.logger=e),e.type==="languageDetector"&&(this.modules.languageDetector=e),e.type==="i18nFormat"&&(this.modules.i18nFormat=e),e.type==="postProcessor"&&mQ.addPostProcessor(e),e.type==="formatter"&&(this.modules.formatter=e),e.type==="3rdParty"&&this.modules.external.push(e),this}setResolvedLanguage(e){if(!(!e||!this.languages)&&!(["cimode","dev"].indexOf(e)>-1)){for(let n=0;n<this.languages.length;n++){const r=this.languages[n];if(!(["cimode","dev"].indexOf(r)>-1)&&this.store.hasLanguageSomeTranslations(r)){this.resolvedLanguage=r;break}}!this.resolvedLanguage&&this.languages.indexOf(e)<0&&this.store.hasLanguageSomeTranslations(e)&&(this.resolvedLanguage=e,this.languages.unshift(e))}}changeLanguage(e,n){this.isLanguageChangingTo=e;const r=Fv();this.emit("languageChanging",e);const i=l=>{this.language=l,this.languages=this.services.languageUtils.toResolveHierarchy(l),this.resolvedLanguage=void 0,this.setResolvedLanguage(l)},s=(l,c)=>{c?this.isLanguageChangingTo===e&&(i(c),this.translator.changeLanguage(c),this.isLanguageChangingTo=void 0,this.emit("languageChanged",c),this.logger.log("languageChanged",c)):this.isLanguageChangingTo=void 0,r.resolve((...d)=>this.t(...d)),n&&n(l,(...d)=>this.t(...d))},o=l=>{!e&&!l&&this.services.languageDetector&&(l=[]);const c=Bn(l)?l:l&&l[0],d=this.store.hasLanguageSomeTranslations(c)?c:this.services.languageUtils.getBestMatchFromCodes(Bn(l)?[l]:l);d&&(this.language||i(d),this.translator.language||this.translator.changeLanguage(d),this.services.languageDetector?.cacheUserLanguage?.(d)),this.loadResources(d,u=>{s(u,d)})};return!e&&this.services.languageDetector&&!this.services.languageDetector.async?o(this.services.languageDetector.detect()):!e&&this.services.languageDetector&&this.services.languageDetector.async?this.services.languageDetector.detect.length===0?this.services.languageDetector.detect().then(o):this.services.languageDetector.detect(o):o(e),r}getFixedT(e,n,r){const i=(s,o,...l)=>{let c;typeof o!="object"?c=this.options.overloadTranslationOptionHandler([s,o].concat(l)):c={...o},c.lng=c.lng||i.lng,c.lngs=c.lngs||i.lngs,c.ns=c.ns||i.ns,c.keyPrefix!==""&&(c.keyPrefix=c.keyPrefix||r||i.keyPrefix);const d=this.options.keySeparator||".";let u;return c.keyPrefix&&Array.isArray(s)?u=s.map(m=>(typeof m=="function"&&(m=rF(m,{...this.options,...o})),`${c.keyPrefix}${d}${m}`)):(typeof s=="function"&&(s=rF(s,{...this.options,...o})),u=c.keyPrefix?`${c.keyPrefix}${d}${s}`:s),this.t(u,c)};return Bn(e)?i.lng=e:i.lngs=e,i.ns=n,i.keyPrefix=r,i}t(...e){return this.translator?.translate(...e)}exists(...e){return this.translator?.exists(...e)}setDefaultNamespace(e){this.options.defaultNS=e}hasLoadedNamespace(e,n={}){if(!this.isInitialized)return this.logger.warn("hasLoadedNamespace: i18next was not initialized",this.languages),!1;if(!this.languages||!this.languages.length)return this.logger.warn("hasLoadedNamespace: i18n.languages were undefined or empty",this.languages),!1;const r=n.lng||this.resolvedLanguage||this.languages[0],i=this.options?this.options.fallbackLng:!1,s=this.languages[this.languages.length-1];if(r.toLowerCase()==="cimode")return!0;const o=(l,c)=>{const d=this.services.backendConnector.state[`${l}|${c}`];return d===-1||d===0||d===2};if(n.precheck){const l=n.precheck(this,o);if(l!==void 0)return l}return!!(this.hasResourceBundle(r,e)||!this.services.backendConnector.backend||this.options.resources&&!this.options.partialBundledLanguages||o(r,e)&&(!i||o(s,e)))}loadNamespaces(e,n){const r=Fv();return this.options.ns?(Bn(e)&&(e=[e]),e.forEach(i=>{this.options.ns.indexOf(i)<0&&this.options.ns.push(i)}),this.loadResources(i=>{r.resolve(),n&&n(i)}),r):(n&&n(),Promise.resolve())}loadLanguages(e,n){const r=Fv();Bn(e)&&(e=[e]);const i=this.options.preload||[],s=e.filter(o=>i.indexOf(o)<0&&this.services.languageUtils.isSupportedCode(o));return s.length?(this.options.preload=i.concat(s),this.loadResources(o=>{r.resolve(),n&&n(o)}),r):(n&&n(),Promise.resolve())}dir(e){if(e||(e=this.resolvedLanguage||(this.languages?.length>0?this.languages[0]:this.language)),!e)return"rtl";try{const i=new Intl.Locale(e);if(i&&i.getTextInfo){const s=i.getTextInfo();if(s&&s.direction)return s.direction}}catch{}const n=["ar","shu","sqr","ssh","xaa","yhd","yud","aao","abh","abv","acm","acq","acw","acx","acy","adf","ads","aeb","aec","afb","ajp","apc","apd","arb","arq","ars","ary","arz","auz","avl","ayh","ayl","ayn","ayp","bbz","pga","he","iw","ps","pbt","pbu","pst","prp","prd","ug","ur","ydd","yds","yih","ji","yi","hbo","men","xmn","fa","jpr","peo","pes","prs","dv","sam","ckb"],r=this.services?.languageUtils||new uH(gH());return e.toLowerCase().indexOf("-latn")>1?"ltr":n.indexOf(r.getLanguagePartFromCode(e))>-1||e.toLowerCase().indexOf("-arab")>1?"rtl":"ltr"}static createInstance(e={},n){const r=new E0(e,n);return r.createInstance=E0.createInstance,r}cloneInstance(e={},n=e1){const r=e.forkResourceStore;r&&delete e.forkResourceStore;const i={...this.options,...e,isClone:!0},s=new E0(i);if((e.debug!==void 0||e.prefix!==void 0)&&(s.logger=s.logger.clone(e)),["store","services","language"].forEach(l=>{s[l]=this[l]}),s.services={...this.services},s.services.utils={hasLoadedNamespace:s.hasLoadedNamespace.bind(s)},r){const l=Object.keys(this.store.data).reduce((c,d)=>(c[d]={...this.store.data[d]},c[d]=Object.keys(c[d]).reduce((u,m)=>(u[m]={...c[d][m]},u),c[d]),c),{});s.store=new cH(l,i),s.services.resourceStore=s.store}return s.translator=new wN(s.services,i),s.translator.on("*",(l,...c)=>{s.emit(l,...c)}),s.init(i,n),s.translator.options=i,s.translator.backendConnector.services.utils={hasLoadedNamespace:s.hasLoadedNamespace.bind(s)},s}toJSON(){return{options:this.options,store:this.store,language:this.language,languages:this.languages,resolvedLanguage:this.resolvedLanguage}}}const yo=E0.createInstance();yo.createInstance;yo.dir;yo.init;yo.loadResources;yo.reloadResources;yo.use;yo.changeLanguage;yo.getFixedT;yo.t;yo.exists;yo.setDefaultNamespace;yo.hasLoadedNamespace;yo.loadNamespaces;yo.loadLanguages;const Uue=(t,e,n,r)=>{const i=[n,{code:e,...r||{}}];if(t?.services?.logger?.forward)return t.services.logger.forward(i,"warn","react-i18next::",!0);ug(i[0])&&(i[0]=`react-i18next:: ${i[0]}`),t?.services?.logger?.warn?t.services.logger.warn(...i):console?.warn&&console.warn(...i)},xH={},pQ=(t,e,n,r)=>{ug(n)&&xH[n]||(ug(n)&&(xH[n]=new Date),Uue(t,e,n,r))},fQ=(t,e)=>()=>{if(t.isInitialized)e();else{const n=()=>{setTimeout(()=>{t.off("initialized",n)},0),e()};t.on("initialized",n)}},aF=(t,e,n)=>{t.loadNamespaces(e,fQ(t,n))},yH=(t,e,n,r)=>{if(ug(n)&&(n=[n]),t.options.preload&&t.options.preload.indexOf(e)>-1)return aF(t,n,r);n.forEach(i=>{t.options.ns.indexOf(i)<0&&t.options.ns.push(i)}),t.loadLanguages(e,fQ(t,r))},Bue=(t,e,n={})=>!e.languages||!e.languages.length?(pQ(e,"NO_LANGUAGES","i18n.languages were undefined or empty",{languages:e.languages}),!0):e.hasLoadedNamespace(t,{lng:n.lng,precheck:(r,i)=>{if(n.bindI18n&&n.bindI18n.indexOf("languageChanging")>-1&&r.services.backendConnector.backend&&r.isLanguageChangingTo&&!i(r.isLanguageChangingTo,t))return!1}}),ug=t=>typeof t=="string",Hue=t=>typeof t=="object"&&t!==null,que=/&(?:amp|#38|lt|#60|gt|#62|apos|#39|quot|#34|nbsp|#160|copy|#169|reg|#174|hellip|#8230|#x2F|#47);/g,$ue={"&amp;":"&","&#38;":"&","&lt;":"<","&#60;":"<","&gt;":">","&#62;":">","&apos;":"'","&#39;":"'","&quot;":'"',"&#34;":'"',"&nbsp;":" ","&#160;":" ","&copy;":"©","&#169;":"©","&reg;":"®","&#174;":"®","&hellip;":"…","&#8230;":"…","&#x2F;":"/","&#47;":"/"},Vue=t=>$ue[t],Gue=t=>t.replace(que,Vue);let iF={bindI18n:"languageChanged",bindI18nStore:"",transEmptyNodeValue:"",transSupportBasicHtmlNodes:!0,transWrapTextNodes:"",transKeepBasicHtmlNodesFor:["br","strong","i","p"],useSuspense:!0,unescape:Gue,transDefaultProps:void 0};const Wue=(t={})=>{iF={...iF,...t}},Kue=()=>iF;let gQ;const Xue=t=>{gQ=t},Yue=()=>gQ,Que={type:"3rdParty",init(t){Wue(t.options.react),Xue(t)}},Jue=w.createContext();class Zue{constructor(){this.usedNamespaces={}}addUsedNamespaces(e){e.forEach(n=>{this.usedNamespaces[n]||(this.usedNamespaces[n]=!0)})}getUsedNamespaces(){return Object.keys(this.usedNamespaces)}}var EM={exports:{}},DM={};var vH;function eme(){if(vH)return DM;vH=1;var t=Bg();function e(m,p){return m===p&&(m!==0||1/m===1/p)||m!==m&&p!==p}var n=typeof Object.is=="function"?Object.is:e,r=t.useState,i=t.useEffect,s=t.useLayoutEffect,o=t.useDebugValue;function l(m,p){var f=p(),x=r({inst:{value:f,getSnapshot:p}}),v=x[0].inst,b=x[1];return s(function(){v.value=f,v.getSnapshot=p,c(v)&&b({inst:v})},[m,f,p]),i(function(){return c(v)&&b({inst:v}),m(function(){c(v)&&b({inst:v})})},[m]),o(f),f}function c(m){var p=m.getSnapshot;m=m.value;try{var f=p();return!n(m,f)}catch{return!0}}function d(m,p){return p()}var u=typeof window>"u"||typeof window.document>"u"||typeof window.document.createElement>"u"?d:l;return DM.useSyncExternalStore=t.useSyncExternalStore!==void 0?t.useSyncExternalStore:u,DM}var wH;function bQ(){return wH||(wH=1,EM.exports=eme()),EM.exports}var MI=bQ();const tme=(t,e)=>ug(e)?e:Hue(e)&&ug(e.defaultValue)?e.defaultValue:Array.isArray(t)?t[t.length-1]:t,nme={t:tme,ready:!1},rme=()=>()=>{},_t=(t,e={})=>{const{i18n:n}=e,{i18n:r,defaultNS:i}=w.useContext(Jue)||{},s=n||r||Yue();s&&!s.reportNamespaces&&(s.reportNamespaces=new Zue),s||pQ(s,"NO_I18NEXT_INSTANCE","useTranslation: You will need to pass in an i18next instance by using initReactI18next");const o=w.useMemo(()=>({...Kue(),...s?.options?.react,...e}),[s,e]),{useSuspense:l,keyPrefix:c}=o,d=i||s?.options?.defaultNS,u=ug(d)?[d]:d||["translation"],m=w.useMemo(()=>u,u);s?.reportNamespaces?.addUsedNamespaces?.(m);const p=w.useRef(0),f=w.useCallback(k=>{if(!s)return rme;const{bindI18n:E,bindI18nStore:$}=o,z=()=>{p.current+=1,k()};return E&&s.on(E,z),$&&s.store.on($,z),()=>{E&&E.split(" ").forEach(X=>s.off(X,z)),$&&$.split(" ").forEach(X=>s.store.off(X,z))}},[s,o]),x=w.useRef(),v=w.useCallback(()=>{if(!s)return nme;const k=!!(s.isInitialized||s.initializedStoreOnce)&&m.every(ne=>Bue(ne,s,o)),E=e.lng||s.language,$=p.current,z=x.current;if(z&&z.ready===k&&z.lng===E&&z.keyPrefix===c&&z.revision===$)return z;const R={t:s.getFixedT(E,o.nsMode==="fallback"?m:m[0],c),ready:k,lng:E,keyPrefix:c,revision:$};return x.current=R,R},[s,m,c,o,e.lng]),[b,g]=w.useState(0),{t:S,ready:N}=MI.useSyncExternalStore(f,v,v);w.useEffect(()=>{if(s&&!N&&!l){const k=()=>g(E=>E+1);e.lng?yH(s,e.lng,m,k):aF(s,m,k)}},[s,e.lng,m,N,l,b]);const P=s||{},C=w.useRef(null),A=w.useRef(),T=k=>{const E=Object.getOwnPropertyDescriptors(k);E.__original&&delete E.__original;const $=Object.create(Object.getPrototypeOf(k),E);if(!Object.prototype.hasOwnProperty.call($,"__original"))try{Object.defineProperty($,"__original",{value:k,writable:!1,enumerable:!1,configurable:!1})}catch{}return $},F=w.useMemo(()=>{const k=P,E=k?.language;let $=k;k&&(C.current&&C.current.__original===k?A.current!==E?($=T(k),C.current=$,A.current=E):$=C.current:($=T(k),C.current=$,A.current=E));const z=[S,$,N];return z.t=S,z.i18n=$,z.ready=N,z},[S,P,N,P.resolvedLanguage,P.language,P.languages]);if(s&&l&&!N)throw new Promise(k=>{const E=()=>k();e.lng?yH(s,e.lng,m,E):aF(s,m,E)});return F},{slice:ame,forEach:ime}=[];function sme(t){return ime.call(ame.call(arguments,1),e=>{if(e)for(const n in e)t[n]===void 0&&(t[n]=e[n])}),t}function ome(t){return typeof t!="string"?!1:[/<\s*script.*?>/i,/<\s*\/\s*script\s*>/i,/<\s*img.*?on\w+\s*=/i,/<\s*\w+\s*on\w+\s*=.*?>/i,/javascript\s*:/i,/vbscript\s*:/i,/expression\s*\(/i,/eval\s*\(/i,/alert\s*\(/i,/document\.cookie/i,/document\.write\s*\(/i,/window\.location/i,/innerHTML/i].some(n=>n.test(t))}const SH=/^[\u0009\u0020-\u007e\u0080-\u00ff]+$/,lme=function(t,e){const r=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{path:"/"},i=encodeURIComponent(e);let s=`${t}=${i}`;if(r.maxAge>0){const o=r.maxAge-0;if(Number.isNaN(o))throw new Error("maxAge should be a Number");s+=`; Max-Age=${Math.floor(o)}`}if(r.domain){if(!SH.test(r.domain))throw new TypeError("option domain is invalid");s+=`; Domain=${r.domain}`}if(r.path){if(!SH.test(r.path))throw new TypeError("option path is invalid");s+=`; Path=${r.path}`}if(r.expires){if(typeof r.expires.toUTCString!="function")throw new TypeError("option expires is invalid");s+=`; Expires=${r.expires.toUTCString()}`}if(r.httpOnly&&(s+="; HttpOnly"),r.secure&&(s+="; Secure"),r.sameSite)switch(typeof r.sameSite=="string"?r.sameSite.toLowerCase():r.sameSite){case!0:s+="; SameSite=Strict";break;case"lax":s+="; SameSite=Lax";break;case"strict":s+="; SameSite=Strict";break;case"none":s+="; SameSite=None";break;default:throw new TypeError("option sameSite is invalid")}return r.partitioned&&(s+="; Partitioned"),s},_H={create(t,e,n,r){let i=arguments.length>4&&arguments[4]!==void 0?arguments[4]:{path:"/",sameSite:"strict"};n&&(i.expires=new Date,i.expires.setTime(i.expires.getTime()+n*60*1e3)),r&&(i.domain=r),document.cookie=lme(t,e,i)},read(t){const e=`${t}=`,n=document.cookie.split(";");for(let r=0;r<n.length;r++){let i=n[r];for(;i.charAt(0)===" ";)i=i.substring(1,i.length);if(i.indexOf(e)===0)return i.substring(e.length,i.length)}return null},remove(t,e){this.create(t,"",-1,e)}};var cme={name:"cookie",lookup(t){let{lookupCookie:e}=t;if(e&&typeof document<"u")return _H.read(e)||void 0},cacheUserLanguage(t,e){let{lookupCookie:n,cookieMinutes:r,cookieDomain:i,cookieOptions:s}=e;n&&typeof document<"u"&&_H.create(n,t,r,i,s)}},dme={name:"querystring",lookup(t){let{lookupQuerystring:e}=t,n;if(typeof window<"u"){let{search:r}=window.location;!window.location.search&&window.location.hash?.indexOf("?")>-1&&(r=window.location.hash.substring(window.location.hash.indexOf("?")));const s=r.substring(1).split("&");for(let o=0;o<s.length;o++){const l=s[o].indexOf("=");l>0&&s[o].substring(0,l)===e&&(n=s[o].substring(l+1))}}return n}},ume={name:"hash",lookup(t){let{lookupHash:e,lookupFromHashIndex:n}=t,r;if(typeof window<"u"){const{hash:i}=window.location;if(i&&i.length>2){const s=i.substring(1);if(e){const o=s.split("&");for(let l=0;l<o.length;l++){const c=o[l].indexOf("=");c>0&&o[l].substring(0,c)===e&&(r=o[l].substring(c+1))}}if(r)return r;if(!r&&n>-1){const o=i.match(/\/([a-zA-Z-]*)/g);return Array.isArray(o)?o[typeof n=="number"?n:0]?.replace("/",""):void 0}}}return r}};let jb=null;const kH=()=>{if(jb!==null)return jb;try{if(jb=typeof window<"u"&&window.localStorage!==null,!jb)return!1;const t="i18next.translate.boo";window.localStorage.setItem(t,"foo"),window.localStorage.removeItem(t)}catch{jb=!1}return jb};var mme={name:"localStorage",lookup(t){let{lookupLocalStorage:e}=t;if(e&&kH())return window.localStorage.getItem(e)||void 0},cacheUserLanguage(t,e){let{lookupLocalStorage:n}=e;n&&kH()&&window.localStorage.setItem(n,t)}};let Mb=null;const NH=()=>{if(Mb!==null)return Mb;try{if(Mb=typeof window<"u"&&window.sessionStorage!==null,!Mb)return!1;const t="i18next.translate.boo";window.sessionStorage.setItem(t,"foo"),window.sessionStorage.removeItem(t)}catch{Mb=!1}return Mb};var hme={name:"sessionStorage",lookup(t){let{lookupSessionStorage:e}=t;if(e&&NH())return window.sessionStorage.getItem(e)||void 0},cacheUserLanguage(t,e){let{lookupSessionStorage:n}=e;n&&NH()&&window.sessionStorage.setItem(n,t)}},pme={name:"navigator",lookup(t){const e=[];if(typeof navigator<"u"){const{languages:n,userLanguage:r,language:i}=navigator;if(n)for(let s=0;s<n.length;s++)e.push(n[s]);r&&e.push(r),i&&e.push(i)}return e.length>0?e:void 0}},fme={name:"htmlTag",lookup(t){let{htmlTag:e}=t,n;const r=e||(typeof document<"u"?document.documentElement:null);return r&&typeof r.getAttribute=="function"&&(n=r.getAttribute("lang")),n}},gme={name:"path",lookup(t){let{lookupFromPathIndex:e}=t;if(typeof window>"u")return;const n=window.location.pathname.match(/\/([a-zA-Z-]*)/g);return Array.isArray(n)?n[typeof e=="number"?e:0]?.replace("/",""):void 0}},bme={name:"subdomain",lookup(t){let{lookupFromSubdomainIndex:e}=t;const n=typeof e=="number"?e+1:1,r=typeof window<"u"&&window.location?.hostname?.match(/^(\w{2,5})\.(([a-z0-9-]{1,63}\.[a-z]{2,6})|localhost)/i);if(r)return r[n]}};let xQ=!1;try{document.cookie,xQ=!0}catch{}const yQ=["querystring","cookie","localStorage","sessionStorage","navigator","htmlTag"];xQ||yQ.splice(1,1);const xme=()=>({order:yQ,lookupQuerystring:"lng",lookupCookie:"i18next",lookupLocalStorage:"i18nextLng",lookupSessionStorage:"i18nextLng",caches:["localStorage"],excludeCacheFor:["cimode"],convertDetectedLanguage:t=>t});class vQ{constructor(e){let n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{};this.type="languageDetector",this.detectors={},this.init(e,n)}init(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:{languageUtils:{}},n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:{},r=arguments.length>2&&arguments[2]!==void 0?arguments[2]:{};this.services=e,this.options=sme(n,this.options||{},xme()),typeof this.options.convertDetectedLanguage=="string"&&this.options.convertDetectedLanguage.indexOf("15897")>-1&&(this.options.convertDetectedLanguage=i=>i.replace("-","_")),this.options.lookupFromUrlIndex&&(this.options.lookupFromPathIndex=this.options.lookupFromUrlIndex),this.i18nOptions=r,this.addDetector(cme),this.addDetector(dme),this.addDetector(mme),this.addDetector(hme),this.addDetector(pme),this.addDetector(fme),this.addDetector(gme),this.addDetector(bme),this.addDetector(ume)}addDetector(e){return this.detectors[e.name]=e,this}detect(){let e=arguments.length>0&&arguments[0]!==void 0?arguments[0]:this.options.order,n=[];return e.forEach(r=>{if(this.detectors[r]){let i=this.detectors[r].lookup(this.options);i&&typeof i=="string"&&(i=[i]),i&&(n=n.concat(i))}}),n=n.filter(r=>r!=null&&!ome(r)).map(r=>this.options.convertDetectedLanguage(r)),this.services&&this.services.languageUtils&&this.services.languageUtils.getBestMatchFromCodes?n:n.length>0?n[0]:null}cacheUserLanguage(e){let n=arguments.length>1&&arguments[1]!==void 0?arguments[1]:this.options.caches;n&&(this.options.excludeCacheFor&&this.options.excludeCacheFor.indexOf(e)>-1||n.forEach(r=>{this.detectors[r]&&this.detectors[r].cacheUserLanguage(e,this.options)}))}}vQ.type="languageDetector";const yme={nav:{printers:"Printers",archives:"Archives",queue:"Queue",stats:"Statistics",profiles:"Profiles",maintenance:"Maintenance",projects:"Projects",inventory:"Filament",files:"File Manager",makerworld:"MakerWorld",notifications:"Notifications",settings:"Settings",system:"System",collapseSidebar:"Collapse sidebar",expandSidebar:"Expand sidebar",update:"Update",updateAvailable:"Update available: v{{version}}",updateAvailableBanner:"Version {{version}} is available!",viewUpdate:"View update",viewOnGithub:"View on GitHub",keyboardShortcuts:"Keyboard shortcuts (?)",switchToLight:"Switch to light mode",switchToDark:"Switch to dark mode",smartSwitches:"Smart Switches",logout:"Logout"},common:{save:"Save",saving:"Saving...",cancel:"Cancel",delete:"Delete",edit:"Edit",add:"Add",close:"Close",confirm:"Confirm",loading:"Loading...",error:"Error",success:"Success",warning:"Warning",enabled:"Enabled",disabled:"Disabled",yes:"Yes",no:"No",on:"On",off:"Off",all:"All",none:"None",search:"Search",filter:"Filter",sort:"Sort",refresh:"Refresh",download:"Download",upload:"Upload",uploading:"Uploading...",uploadFailed:"Upload failed",actions:"Actions",status:"Status",name:"Name",description:"Description",date:"Date",time:"Time",hours:"hours",minutes:"minutes",seconds:"seconds",days:"days",enable:"Enable",disable:"Disable",permissions:"Permissions",noPrinters:"No printers configured",noData:"No data available",linkNotFound:"Link not found",required:"Required",optional:"Optional",dismiss:"Dismiss",apply:"Apply",reset:"Reset",export:"Export",import:"Import",clear:"Clear",selectAll:"Select All",deselectAll:"Deselect All",noChange:"— No change —",unchanged:"Unchanged",unassigned:"Unassigned",unknown:"Unknown",unknownError:"Unknown error",today:"Today",tomorrow:"Tomorrow",asap:"ASAP",overdue:"Overdue",now:"Now",collapse:"Collapse",expand:"Expand",viewArchive:"View archive",viewInFileManager:"View in File Manager",addedBy:"Added by {{username}}",prints:"prints",more:"+{{count}} more",ascending:"Ascending",descending:"Descending",back:"Back",copy:"Copy",copied:"Copied!",printer:"Printer",remove:"Remove",type:"Type",print:"Print",rename:"Rename",move:"Move",create:"Create",duplicate:"Duplicate",left:"Left",right:"Right"},printers:{title:"Printers",addPrinter:"Add Printer",editPrinter:"Edit Printer",deletePrinter:"Delete Printer",printerName:"Printer Name",serialNumber:"Serial Number",ipAddress:"IP Address / Hostname",accessCode:"Access Code",model:"Model",nozzleCount:"Nozzle Count",autoArchive:"Auto Archive",status:{available:"Available",idle:"Idle",printing:"Printing",paused:"Paused",offline:"Offline",problem:"Problem",error:"Error",finished:"Finished",unknown:"Unknown"},temperatures:{nozzle:"Nozzle",bed:"Bed",chamber:"Chamber"},progress:"{{percent}}% complete",timeRemaining:"{{time}} remaining",deleteConfirm:'Are you sure you want to delete "{{name}}"?',maintenanceOk:"Maintenance OK",maintenanceWarning:"{{count}} warning",maintenanceWarning_plural:"{{count}} warnings",maintenanceDue:"{{count}} due",maintenanceDue_plural:"{{count}} due",sort:{name:"Name",status:"Status",model:"Model",location:"Location",ascending:"Sort ascending",descending:"Sort descending"},cardSize:{small:"Small cards",medium:"Medium cards",large:"Large cards",extraLarge:"Extra large cards"},hideOffline:"Hide offline",nextAvailable:"Next available",powerOn:"Power On",offlinePrintersWithPlugs:"Offline printers with smart plugs",noPrintersConfigured:"No printers configured yet",search:"Search printers...",noSearchResults:"No printers match your search or filters",filter:{allStatuses:"All statuses",allLocations:"All locations"},readyToPrint:"Ready to print",external:"External",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Delete print archives",noLabel:"No label",printPreview:"Print preview",width:"Width",height:"Height",noObjectsFound:"No objects found",objectsLoadedOnPrintStart:"Objects are loaded when a print starts",willBeSkipped:"Will be skipped",name:"Name",serialCannotBeChanged:"Serial number cannot be changed",locationHelp:"Used to group printers and filter queue jobs",wifiSignal:{veryWeak:"Very weak",weak:"Weak",fair:"Fair",good:"Good",excellent:"Excellent"},maintenanceUpToDate:"All maintenance up to date - Click to view",chamberLightOn:"Turn on chamber light",chamberLightOff:"Turn off chamber light",files:"Files",browseFiles:"Browse printer files",autoOffAfterPrint:"Auto power-off after print",autoOffExecuted:"Auto-off was executed - turn printer on to reset",hmsErrors:"HMS Errors",viewHmsErrors:"View {{count}} HMS error(s)",resume:"Resume",pause:"Pause",stop:"Stop",camera:"Camera",skipObject:"Skip Object",reconnect:"Reconnect",forceRefresh:"Force Refresh",forceRefreshSuccess:"Refresh requested",mqttDebug:"MQTT Debug",printerInformation:"Printer Information",copyToClipboard:"Copy",copied:"Copied!",state:"State",wifiSignalLabel:"WiFi Signal",developerMode:"Developer Mode",enabled:"Enabled",disabled:"Disabled",addedOn:"Added",sdCard:"SD Card",inserted:"Inserted",notInserted:"Not inserted",totalPrintHours:"Print Hours",activeNozzle:"Active: {{nozzle}} nozzle",nozzleRack:"Nozzle Rack",nozzleDocked:"Docked",nozzleMounted:"Mounted",nozzleActive:"Active",nozzleIdle:"Idle",nozzleDiameter:"Diameter",nozzleType:"Type",nozzleStatus:"Status",nozzleFilament:"Filament",nozzleWear:"Wear",nozzleMaxTemp:"Max Temp",nozzleSerial:"Serial",nozzleHardenedSteel:"Hardened Steel",nozzleStainlessSteel:"Stainless Steel",nozzleTungstenCarbide:"Tungsten Carbide",nozzleFlow:"Flow",nozzleHighFlow:"High Flow",nozzleStandardFlow:"Standard",firmwareUpdate:"Firmware Update",firmwareInstructions:"On the printer's touchscreen, go to",firmwareNav:"Navigate to",settings:"Settings",firmware:"Firmware",discoverPrinters:"Discover Printers",searching:"Searching...",manualEntry:"Manual Entry",addFromCloud:"Add from Cloud",toast:{printerDeleted:"Printer deleted",missingSpoolAssignment:"Print started on {{printer}}. Missing spool assignment for: {{slots}}",printerAdded:"Printer added",printerUpdated:"Printer updated",failedToDelete:"Failed to delete printer",failedToAdd:"Failed to add printer",failedToUpdate:"Failed to update printer",commandSent:"Command sent",failedToSendCommand:"Failed to send command",turnedOn:"{{name}} turned on",failedToPowerOn:"Failed to power on {{name}}",scriptTriggered:"Script triggered",printStopped:"Print stopped",printPaused:"Print paused",printResumed:"Print resumed",referenceDeleted:"Reference deleted",detectionAreaSaved:"Detection area saved",failedToRunScript:"Failed to run script",failedToStopPrint:"Failed to stop print",failedToPausePrint:"Failed to pause print",failedToResumePrint:"Failed to resume print",failedToControlChamberLight:"Failed to control chamber light",failedToSetSpeed:"Failed to set print speed",failedToUpdateSetting:"Failed to update setting",failedToSkipObjects:"Failed to skip objects",failedToRereadRfid:"Failed to re-read RFID",failedToCheckPlate:"Failed to check plate",failedToUpdateLabel:"Failed to update label",failedToDeleteReference:"Failed to delete reference",failedToSaveDetectionArea:"Failed to save detection area",plateCheckEnabled:"Plate check enabled",plateCheckDisabled:"Plate check disabled",calibrationSaved:"Calibration saved!",calibrationFailed:"Calibration failed",rfidRereadInitiated:"RFID re-read initiated"},connection:{connected:"Connected",offline:"Offline"},plateStatus:{markCleared:"Mark plate as cleared",cleared:"Plate Clear",notCleared:"Plate not Clear",inUse:"Plate in Use"},queue:{inQueue:"{{count}} print in queue",inQueue_plural:"{{count}} prints in queue"},controls:"Controls",rfid:{reread:"Re-read RFID"},bedJog:{title:"Move build plate",bed:"Bed",step:"Step (mm)",up:"Move plate up",down:"Move plate down",disabledWhilePrinting:"Disabled while printing",notHomedTitle:"Printer is not homed",notHomedMessage:"The printer has not been homed since the last print. Run auto-home first for safe positioning (parks the toolhead, then homes X, Y, and Z), or move anyway — soft endstops will be bypassed.",homeZ:"Auto Home",moveAnyway:"Move anyway",homingStarted:"Auto-homing printer…"},permission:{noAdd:"You do not have permission to add printers",noEdit:"You do not have permission to edit printers",noDelete:"You do not have permission to delete printers",noControl:"You do not have permission to control printers",noFiles:"You do not have permission to access printer files",noAmsRfid:"You do not have permission to re-read AMS RFID",noSmartPlugControl:"You do not have permission to control smart plugs",noCamera:"You do not have permission to view cameras"},modal:{addTitle:"Add Printer",editTitle:"Edit Printer",myPrinter:"My Printer",selectModel:"Select model...",locationGroup:"Location / Group (optional)",locationPlaceholder:"e.g., Workshop, Office, Basement",autoArchiveLabel:"Auto-archive completed prints",fromPrinterSettings:"From printer settings",modelOptional:"Model (optional)",saveChanges:"Save Changes"},skipObjects:{tooltip:"Skip objects",onlyWhilePrinting:"Skip objects (only while printing)",requiresMultiple:"Skip objects (requires 2+ objects)",title:"Skip Objects",matchIdsInfo:"Match IDs with your printer display",printerShowsIds:"The printer screen shows object IDs on the build plate",skipSelected:"Skip Selected",skipping:"Skipping...",noObjectsSelected:"No objects selected",selectObjectsToSkip:"Select objects you want to skip from the current print",skipped:"skipped",objectsSkipped:"Objects skipped",activeCount:"{{count}} active",waitForLayer:"Wait for layer 2+ to skip objects (currently layer {{layer}})",skip:"Skip",confirmTitle:"Skip Object?",confirmMessage:'Are you sure you want to skip "{{name}}"? This cannot be undone.'},confirm:{deleteTitle:"Delete Printer",deleteMessage:'Are you sure you want to delete "{{name}}"? This will remove all connection settings.',deleteArchivesNote:"All print history for this printer will be permanently deleted.",keepArchivesNote:"Print history will be kept but no longer associated with this printer.",stopTitle:"Stop Print",stopMessage:'Are you sure you want to stop the current print on "{{name}}"? This will cancel the print job.',stopButton:"Stop Print",pauseTitle:"Pause Print",pauseMessage:'Are you sure you want to pause the current print on "{{name}}"?',pauseButton:"Pause Print",resumeTitle:"Resume Print",resumeMessage:'Are you sure you want to resume the print on "{{name}}"?',resumeButton:"Resume Print",powerOnTitle:"Power On Printer",powerOnMessage:'Are you sure you want to turn ON the power for "{{name}}"?',powerOnButton:"Power On",powerOffTitle:"Power Off Printer",powerOffMessage:'Are you sure you want to turn OFF the power for "{{name}}"?',powerOffWarning:'WARNING: "{{name}}" is currently printing! Are you sure you want to turn OFF the power? This will interrupt the print and may damage the printer.',powerOffButton:"Power Off"},bulk:{select:"Select",selectAll:"Select All",selectByLocation:"Select by Location",selected:"{{count}} selected",actions:{stop:"Stop",pause:"Pause",resume:"Resume",clearPlate:"Clear Bed",clearHMS:"Clear Notifications"},confirm:{stopTitle:"Stop {{count}} Prints",stopMessage:"This will cancel active prints on {{count}} printer(s). This action cannot be undone.",stopButton:"Stop All",pauseTitle:"Pause {{count}} Prints",pauseMessage:"This will pause active prints on {{count}} printer(s).",pauseButton:"Pause All",clearPlateTitle:"Clear {{count}} Print Beds",clearPlateMessage:"This will clear the print bed on {{count}} printer(s) and may trigger queued jobs.",clearPlateButton:"Clear All"},success:"{{action}} completed on {{count}} printer(s)",partial:"{{succeeded}} succeeded, {{failed}} failed",noneApplicable:"No selected printers are in the right state for this action",selectByState:"Select by State"},discovery:{title:"Discover Printers",searching:"Searching...",scanning:"Scanning...",scanProgress:"Scanning... {{scanned}}/{{total}}",foundPrinters:"Found {{count}} printer(s)",noPrintersFound:"No printers found",noPrintersFoundSubnet:"No printers found in the specified subnet.",noPrintersFoundNetwork:"No printers found on the network.",allConfigured:"All discovered printers are already configured.",alreadyAdded:"Already added",select:"Select",manualEntry:"Manual Entry",addFromCloud:"Add from Cloud",subnetToScan:"Subnet to scan",dockerNote:"Docker detected. Enter your printer's subnet in CIDR notation. Requires network_mode: host in docker-compose.yml.",scanSubnet:"Scan Subnet for Printers",discoverNetwork:"Discover Printers on Network",scanningSubnet:"Scanning subnet for Bambu printers...",scanningNetwork:"Scanning network...",serialRequired:"Serial required",unknown:"Unknown",failedToStart:"Failed to start discovery"},drying:{start:"Start Drying",stop:"Stop Drying",temperature:"Temperature",duration:"Duration",hours:"hours",timeRemaining:"{{time}} left",active:"Drying",notSupported:"Drying not supported",powerRequired:"Connect AMS power adapter to enable drying",startingDrying:"Starting drying...",stoppingDrying:"Stopping drying...",rotateTray:"Rotate spool during drying"},filaments:"Filaments",openCameraOverlay:"Open camera overlay",openCameraWindow:"Open camera in new window",firmwareUpdateAvailable:"Firmware update available: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Up to date",firmwareUpdateButton:"Update",plateDetection:{noPermission:"You do not have permission to update printers",enabledClick:"Plate check enabled - Click to disable",disabledClick:"Plate check disabled - Click to enable",manageCalibration:"Manage plate detection calibration",calibrationRequired:"Calibration Required",calibrationInstructions:"Please ensure the build plate is <strong>completely empty</strong>, then click Calibrate.",calibrationDescription:"Calibration captures a reference image of the empty plate. Future checks will compare against this reference to detect objects.",calibrationTip:"<strong>Tip:</strong> You can store up to 5 calibrations for different plates. The system automatically uses the best match when checking.",plateEmpty:"Plate appears empty",objectsDetected:"Objects detected on plate",confidence:"Confidence",difference:"Difference",analysisPreview:"Analysis preview:",analysisLegend:"Green box = detection area, Red overlay = differences from calibration",savedReferences:"Saved References ({{count}}/{{max}})",deleteReference:"Delete reference",labelPlaceholder:"Label...",clickToEdit:"{{label}} - Click to edit",clickToAddLabel:"Click to add label"},speed:{title:"Print Speed",silent:"Silent (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Airduct Mode",cooling:"Cooling",heating:"Heating"},noSdCard:"No SD",door:{open:"Open",closed:"Closed"},fans:{partCooling:"Part Cooling Fan",auxiliary:"Auxiliary Fan",chamber:"Chamber Fan"},clickToViewHmsErrors:"Click to view HMS errors",estimatedCompletion:"Estimated completion time",plateNumber:"Plate {{number}}",slotOptions:"Slot options",amsPopup:{friendlyName:"AMS Name",friendlyNamePlaceholder:"e.g. AMS Friendly Name",serialNumber:"Serial Number",firmwareVersion:"Firmware",save:"Save",clear:"Clear",noEditPermission:"You do not have permission to rename AMS units"},firmwareModal:{title:"Firmware Update",titleUpToDate:"Firmware Info",currentVersion:"Current:",latestVersion:"Latest:",releaseNotes:"Release Notes",checkingPrereqs:"Checking prerequisites...",sdCardReady:"SD card ready. Click below to upload firmware.",uploadedSuccess:"Firmware uploaded to SD card!",applyInstructions:"To apply the update on your printer:",step1:"On the printer's touchscreen, go to <strong>Settings</strong>",step2:"Navigate to <strong>Firmware</strong>",step3:"Select <strong>Update from SD card</strong>",step4:"The update will take 10-20 minutes",done:"Done",starting:"Starting...",uploadFirmware:"Upload Firmware",uploadFailed:"Failed to start upload: {{error}}",uploadedToast:"Firmware uploaded! Trigger update from printer screen.",availableVersions:"Available versions",usable:"Usable",unavailable:"Unavailable",installed:"Installed",newerBadge:"newer",olderBadge:"older",currentBadge:"current"},accessCodePlaceholder:"Leave empty to keep current",roi:{title:"Detection Area (ROI)",xStart:"X Start",yStart:"Y Start",width:"Width",height:"Height",instruction:"Adjust the detection area to focus on the build plate. The green box in the preview shows the current area."},developerModeWarning:"Developer LAN mode is not enabled on: {{names}}. Some features may not work.",howToEnable:"How to enable",incompatibleFile:"This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}",dropNotPrintable:"Only .gcode and .gcode.3mf files can be printed",dropToPrint:"Drop to print",cannotPrint:"Printer busy"},archives:{title:"Print Archives",searchPlaceholder:"Search archives...",filterByPrinter:"Filter by printer",filterByStatus:"Filter by status",sortBy:"Sort by",sortNewest:"Newest first",sortOldest:"Oldest first",sortName:"Name",sortDuration:"Duration",sortLargest:"Largest first",sortSmallest:"Smallest first",sortSize:"Size",noArchives:"No archives found",noArchivesSearch:"No archives match your search",originalPrintNotVisible:"Original print not visible - try clearing filters",noArchivesYet:"No archives yet",prints:"prints",pagination:{showing:"Showing",to:"to",of:"of",show:"Show",page:"Page",all:"All"},loadingArchives:"Loading archives...",releaseToUpload:"Release to upload",showAll:"Show all",showFavoritesOnly:"Show favorites only",gridView:"Grid view",listView:"List view",calendarView:"Calendar view",logView:"Print Log",manageTags:"Manage Tags",showFailedPrints:"Show failed prints",hideFailedPrints:"Hide failed prints",hideDuplicates:"Hide Duplicates",viewOriginalPrint:"Click to view original print (#{{id}})",printTime:"Print Time",filamentUsed:"Filament Used",cost:"Cost",reprint:"Reprint",preview:"Preview",deleteArchive:"Delete Archive",deleteConfirm:"Are you sure you want to delete this archive?",favorite:"Favorite",unfavorite:"Remove from favorites",viewDetails:"View Details",status:{completed:"Completed",failed:"Failed",stopped:"Stopped"},toast:{source3mfAttached:"Source 3MF attached: {{filename}}",failedUploadSource3mf:"Failed to upload source 3MF",source3mfRemoved:"Source 3MF removed",failedRemoveSource3mf:"Failed to remove source 3MF",f3dAttached:"F3D attached: {{filename}}",failedUploadF3d:"Failed to upload F3D",f3dRemoved:"F3D removed",failedRemoveF3d:"Failed to remove F3D",timelapseAttached:"Timelapse attached: {{filename}}",timelapseAlreadyAttached:"Timelapse already attached",noMatchingTimelapse:"No matching timelapse found",failedScanTimelapse:"Failed to scan for timelapse",failedAttachTimelapse:"Failed to attach timelapse",timelapseRemoved:"Timelapse removed",failedRemoveTimelapse:"Failed to remove timelapse",timelapseUploaded:"Timelapse uploaded: {{filename}}",failedUploadTimelapse:"Failed to upload timelapse",archiveDeleted:"Archive deleted",failedDeleteArchive:"Failed to delete archive",addedToFavorites:"Added to favorites",removedFromFavorites:"Removed from favorites",projectUpdated:"Project updated",failedUpdateProject:"Failed to update project",linkCopied:"Link copied to clipboard",failedCopyLink:"Failed to copy link",photoDeleted:"Photo deleted",failedDeletePhoto:"Failed to delete photo",failedDeleteArchives:"Failed to delete archives",failedUpdateFavorites:"Failed to update favorites",exportDownloaded:"Export downloaded",exportFailed:"Export failed"},menu:{print:"Print",schedule:"Schedule",openInBambuStudio:"Open in Slicer",slice:"Slice",externalLink:"External Link",viewOnMakerWorld:"View on MakerWorld",preview3d:"3D Preview",viewTimelapse:"View Timelapse",scanForTimelapse:"Scan for Timelapse",uploadTimelapse:"Upload Timelapse",removeTimelapse:"Remove Timelapse",downloadSource3mf:"Download Source 3MF",uploadSource3mf:"Upload Source 3MF",replaceSource3mf:"Replace Source 3MF",removeSource3mf:"Remove Source 3MF",uploadF3d:"Upload F3D",replaceF3d:"Replace F3D",downloadF3d:"Download F3D",removeF3d:"Remove F3D",download:"Download",copyDownloadLink:"Copy Download Link",qrCode:"QR Code",viewPhotos:"View Photos",viewPhotosCount:"View Photos ({{count}})",projectPage:"Project Page",addToFavorites:"Add to Favorites",removeFromFavorites:"Remove from Favorites",edit:"Edit",goToProject:"Go to Project: {{name}}",addToProject:"Add to Project",removeFromProject:"Remove from Project",loading:"Loading...",noProjectsAvailable:"No projects available",searchProjects:"Search projects…",select:"Select",deselect:"Deselect",delete:"Delete"},permission:{noReprint:"You do not have permission to reprint this archive",noAddToQueue:"You do not have permission to add to queue",noUpdateArchives:"You do not have permission to update archives",noUploadFiles:"You do not have permission to upload files",noDownload:"You do not have permission to download archives",noCopyLink:"You do not have permission to copy download links",noDelete:"You do not have permission to delete this archive",noCreate:"You do not have permission to create archives"},platePicker:{title:"Select plate to preview",hint:"This archive has multiple plates. Pick one to open in the GCode viewer.",plateLabel:"Plate {{index}}",objectCount:"{{count}} object",objectCount_plural:"{{count}} objects",noGcode:"This archive has no sliced G-code to preview. Open it in Bambu Studio to slice first."},card:{previousPlate:"Previous plate",nextPlate:"Next plate",plateNumber:"Plate {{index}}",moreOptions:"Right-click for more options",addToFavorites:"Add to favorites",removeFromFavorites:"Remove from favorites",cancelled:"cancelled",failed:"failed",duplicate:"duplicate",duplicateTitle:"This model has been printed before",openSource3mf:"Open source 3MF in Bambu Studio (right-click for more options)",downloadF3d:"Download Fusion 360 design file",viewTimelapse:"View timelapse",viewPhoto:"View 1 photo",viewPhotos:"View {{count}} photos",openFolder:"Open folder: {{name}}",slicedFile:"Sliced file - ready to print",sourceFile:"Source file only - no AMS mapping available",gcode:"GCODE",source:"SOURCE",project:"Project: {{name}}",estimated:"Estimated: {{time}}",actual:"Actual: {{time}}",accuracy:"Accuracy: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} layer",layers:"{{count}} layers",object:"{{count}} object",objects:"{{count}} objects",slicedFor:"Sliced for {{model}}",uploadedBy:"Uploaded By",noPermissionReprint:"You do not have permission to reprint",noFileForReprint:"No 3MF file available — the file could not be downloaded from the printer when the print was recorded",noPermissionEdit:"You do not have permission to edit archives",noPermissionDelete:"You do not have permission to delete archives",reprint:"Reprint",schedulePrint:"Schedule Print",schedule:"Schedule",openInBambuStudio:"Open in Slicer",openInBambuStudioToSlice:"Open in Slicer to slice",slice:"Slice",externalLink:"External Link",makerWorld:"MakerWorld: {{designer}}",viewProject:"View project",noExternalLink:"No external link",preview3d:"3D Preview",download:"Download",edit:"Edit",delete:"Delete"},modal:{deleteArchive:"Delete Archive",deleteConfirm:'Are you sure you want to delete "{{name}}"? This action cannot be undone.',deleteButton:"Delete",removeSource3mf:"Remove Source 3MF",removeSource3mfConfirm:'Are you sure you want to remove the source 3MF file from "{{name}}"? This will delete the original slicer project file.',removeButton:"Remove",removeF3d:"Remove F3D",removeF3dConfirm:'Are you sure you want to remove the Fusion 360 design file from "{{name}}"?',removeTimelapse:"Remove Timelapse",removeTimelapseConfirm:'Are you sure you want to remove the timelapse video from "{{name}}"?',timelapse:"{{name}} - Timelapse",selectTimelapse:"Select Timelapse",selectTimelapseDesc:"No auto-match found. Select the timelapse for this print:",deleteArchives:"Delete Archives",deleteArchivesConfirm:"Are you sure you want to delete {{count}} archive(s)? This action cannot be undone.",deleteCount:"Delete {{count}}"},page:{title:"Archives",printsCount:"{{filtered}} of {{total}} prints",dropFilesHere:"Drop .3mf files here",releaseToUpload:"Release to upload",only3mfSupported:"Only .3mf files are supported",close:"Close",selected:"{{count}} selected",selectAll:"Select All",tags:"Tags",project:"Project",favorite:"Favorite",delete:"Delete",toggledFavorites:"Toggled favorites for {{count}} archive(s)",failedUpdateFavorites:"Failed to update favorites",archivesDeleted:"{{count}} archive(s) deleted",failedDeleteArchives:"Failed to delete archives",photoDeleted:"Photo deleted",failedDeletePhoto:"Failed to delete photo"},list:{name:"Name",printer:"Printer",date:"Date",size:"Size",actions:"Actions",hasTimelapse:"Has timelapse"},log:{date:"Date",printName:"Print Name",printer:"Printer",user:"User",status:"Status",duration:"Duration",filament:"Filament",allPrinters:"All Printers",allUsers:"All Users",allStatuses:"All Statuses",cancelled:"Cancelled",skipped:"Skipped",dateFrom:"From",dateTo:"To",noEntries:"No print log entries found",showing:"Showing {{count}} of {{total}} entries",rowsPerPage:"Rows",page:"Page",prev:"Prev",next:"Next",clearLog:"Clear Log",clearLogTitle:"Clear Print Log",clearLogConfirm:"All print log entries will be permanently deleted. Archives and queue items are not affected. This action cannot be undone. Are you sure?",clearLogButton:"Clear All",cleared:"{{count}} log entries cleared",clearFailed:"Failed to clear print log"}},queue:{title:"Print Queue",subtitle:"Schedule and manage your print jobs",addToQueue:"Add to Queue",print:"Print",reprint:"Re-print",schedulePrint:"Schedule Print",editQueueItem:"Edit Queue Item",printToPrinters:"Print to {{count}} Printers",queueToPrinters:"Queue to {{count}} Printers",queueSelectedPlates:"Queue {{count}} Plates",selectAllPlates:"Select All {{count}} Plates",deselectAll:"Deselect All",printQueued:"Print queued",itemsQueued:"{{count}} items queued",sending:"Sending...",sendingProgress:"Sending {{current}}/{{total}}...",adding:"Adding...",addingProgress:"Adding {{current}}/{{total}}...",savingProgress:"Saving {{current}}/{{total}}...",clearQueue:"Clear Queue",clearHistory:"Clear History",emptyQueue:"Queue is empty",position:"Position",scheduledTime:"Scheduled Time",moveUp:"Move Up",moveDown:"Move Down",startNow:"Start Now",printingInProgress:"Printing in progress...",viewArchive:"View archive",viewInFileManager:"View in File Manager",itemCount:"{{count}} item",itemCount_plural:"{{count}} items",dragToReorder:"Drag to reorder (ASAP only)",reorderHint:"Position only affects ASAP items. Scheduled items run at their set time.",sjf:{label:"SJF",tooltip:"Shortest Job First — scheduler prioritizes shorter prints"},addedBy:"Added by {{name}}",nextInQueue:"Next in queue",clearPlateSuccess:"Plate cleared — ready for next print",plateNumber:"Plate {{index}}",quantity:"Quantity",quantityHint:"Creates {{count}} queue items",activeBatches:"Active Batches",batchProgress:"{{completed}} of {{total}} completed",cancelBatch:"Cancel Remaining",batchCancelled:"Remaining batch items cancelled",cancelBatchConfirmTitle:"Cancel Batch",cancelBatchConfirmMessage:"Cancel all remaining pending items in this batch?",batch:"Batch",sections:{currentlyPrinting:"Currently Printing",queued:"Queued",history:"History"},status:{pending:"Pending",waiting:"Waiting",printing:"Printing",paused:"Paused",completed:"Completed",failed:"Failed",skipped:"Skipped",cancelled:"Cancelled"},summary:{printing:"Printing",queued:"Queued",totalTime:"Total Queue Time",totalWeight:"Total Queue Weight",history:"History"},filter:{allPrinters:"All Printers",unassigned:"Unassigned",allStatus:"All Status",allLocations:"All Locations",any:"Any"},sort:{byPosition:"Sort by Position",byName:"Sort by Name",byPrinter:"Sort by Printer",bySchedule:"Sort by Schedule",byDate:"Sort by Date",ascendingOldest:"Ascending (oldest first)",descendingNewest:"Descending (newest first)"},badges:{staged:"Staged",requiresPrevious:"Requires previous success",autoPowerOff:"Auto power off",gcodeInjection:"G-code"},empty:{title:"No prints scheduled",description:'Schedule a print from the Archives page using the "Schedule" option in the context menu, or drag and drop files to get started.'},time:{asap:"ASAP",overdue:"Overdue",now:"Now",lessThanMinute:"In less than a minute",inMinutes:"In {{count}} min",inHours:"In {{count}} hours"},actions:{stopPrint:"Stop Print",startPrint:"Start Print",requeue:"Re-queue"},bulkEdit:{title:"Edit {{count}} Item",title_plural:"Edit {{count}} Items",description:"Only changed settings will be applied to selected items.",printer:"Printer",noChange:"— No change —",queueOptions:"Queue Options",staged:"Staged (manual start)",autoPowerOff:"Auto power off after print",requirePrevious:"Require previous success",printOptions:"Print Options",bedLevelling:"Bed levelling",flowCalibration:"Flow calibration",vibrationCalibration:"Vibration calibration",layerInspection:"First layer inspection",timelapse:"Timelapse",useAms:"Use AMS",applyChanges:"Apply Changes",selectAll:"Select All",deselectAll:"Deselect All",selected:"{{count}} selected",editSelected:"Edit Selected",cancelSelected:"Cancel Selected"},confirm:{cancelTitle:"Cancel Scheduled Print",cancelMessage:'Are you sure you want to cancel "{{name}}"?',stopTitle:"Stop Print",stopMessage:'Are you sure you want to stop the current print "{{name}}"? This will cancel the print job on the printer.',removeTitle:"Remove from History",removeMessage:'Are you sure you want to remove "{{name}}" from the queue history?',clearHistoryTitle:"Clear History",clearHistoryMessage:"Are you sure you want to remove all {{count}} item(s) from the history?",cancelButton:"Cancel Print",stopButton:"Stop Print",thisPrint:"this print",thisItem:"this item"},toast:{cancelled:"Queue item cancelled",cancelFailed:"Failed to cancel item",removed:"Queue item removed",removeFailed:"Failed to remove item",stopped:"Print stopped",stopFailed:"Failed to stop print",released:"Print released to queue",startFailed:"Failed to start print",reorderFailed:"Failed to reorder queue",historyCleared:"Cleared {{count}} history item(s)",clearHistoryFailed:"Failed to clear history",updateFailed:"Failed to update items",bulkCancelled:"Cancelled {{count}} item(s)",bulkCancelFailed:"Failed to cancel items"},timeline:{listView:"List",timelineView:"Timeline",unassigned:"Unassigned",noData:"No scheduled prints for this day",allDoneBy:"All prints estimated done by {{time}}",staged:"Staged",filterAll:"Show All",filterPrinting:"Printing",filterQueued:"Queued",time:{anyMoment:"any moment",minutesLeft:"{{minutes}}m left",hoursLeft:"{{hours}}h left",hoursMinutesLeft:"{{hours}}h {{minutes}}m left"},day:{previous:"Previous day",next:"Next day",today:"Today"}},permissions:{noStopPrint:"You do not have permission to stop prints",noStartPrint:"You do not have permission to start prints",noEdit:"You do not have permission to edit this queue item",noCancel:"You do not have permission to cancel this queue item",noRequeue:"You do not have permission to re-queue items",noRemove:"You do not have permission to remove this queue item",noClearHistory:"You do not have permission to clear all history",noEditItems:"You do not have permission to edit queue items",noCancelItems:"You do not have permission to cancel queue items"}},backgroundDispatch:{unknownFile:"Unknown file",unknownPrinter:"Unknown printer",startingPrints:"Starting prints",progressSummary:"{{complete}}/{{total}} complete • Dispatched: {{dispatched}} • Processing: {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Dismiss dispatch toast",cancelDispatchJob:"Cancel dispatch job",cancel:"Cancel",cancelling:"Cancelling…",awaitingPrinter:"Awaiting printer…",status:{dispatched:"Dispatched",processing:"Processing",completed:"Completed",failed:"Failed",cancelled:"Cancelled"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Dispatch cancelled",cancelFailed:"Failed to cancel dispatch",completeWithFailures:"Background dispatch complete: {{completed}} succeeded, {{failed}} failed",completeSuccess:"Background dispatch complete: {{completed}} succeeded",printStartedRemaining:"{{completed}} print(s) started, {{remaining}} more sending..."}},stats:{title:"Dashboard",subtitle:"Drag widgets to rearrange. Click the eye icon to hide.",overview:"Overview",totalPrints:"Total Prints",successRate:"Success Rate",totalPrintTime:"Total Print Time",printTime:"Print Time",totalFilament:"Total Filament Used",filamentUsed:"Filament Used",filamentCost:"Filament Cost",totalCost:"Total Cost",energyUsed:"Energy Used",energyCost:"Energy Cost",energyWarmingUpTooltip:"Energy tracking is still collecting hourly snapshots. Date-range totals will become accurate once at least one snapshot exists before the selected range. Early values may undercount.",averagePrintTime:"Average Print Time",printsPerDay:"Prints per Day",byPrinter:"By Printer",printsByPrinter:"Prints by Printer",byMaterial:"By Material",byMonth:"By Month",last7Days:"Last 7 Days",last30Days:"Last 30 Days",last90Days:"Last 90 Days",allTime:"All Time",quickStats:"Quick Stats",printActivity:"Print Activity",filamentTypes:"Filament Types",filamentTrends:"Filament Trends",failureAnalysis:"Failure Analysis",timeAccuracy:"Time Accuracy",successful:"Successful:",failed:"Failed:",perfectEstimate:"100% = perfect estimate",noTimeAccuracyData:"No time accuracy data yet",noFilamentData:"No filament data available",noPrinterData:"No printer data available",noPrintData:"No print data available",noPrintDataLast30Days:"No print data in the last 30 days",failureReasons:"Failure Reasons",topFailureReasons:"Top Failure Reasons",failedPrintsCount:"{{failed}} / {{total}} prints failed",lastWeekRate:"Last week: {{rate}}%",resetLayout:"Reset Layout",recalculateCosts:"Recalculate Costs",recalculateCostsHint:"Recalculate all archive costs using current filament prices",exportStats:"Export Stats",exportAsCsv:"Export as CSV",exportAsExcel:"Export as Excel",hiddenCount:"{{count}} Hidden",exportDownloaded:"Export downloaded",exportFailed:"Export failed",layoutReset:"Layout reset",recalculatedCosts:"Recalculated costs for {{count}} archives",recalculateFailed:"Failed to recalculate costs",loadingStats:"Loading statistics...",noPermissionResetLayout:"You do not have permission to reset layout",noPermissionRecalculate:"You do not have permission to recalculate costs",noPrintDataInRange:"No print data in selected range",periodFilament:"Period Filament",periodCost:"Period Cost",avgPerPrint:"Avg per Print",usageOverTime:"Usage Over Time",filamentByWeight:"Weight",printDuration:"Print Duration",printerUtilization:"Printer Utilization",filamentSuccess:"Success by Material",printHabits:"Print Habits",printTimeOfDay:"Print Time of Day",colorDistribution:"Color Distribution",noColorData:"No color data available",records:"Records",longestPrint:"Longest Print",heaviestPrint:"Heaviest Print",mostExpensivePrint:"Most Expensive",busiestDay:"Busiest Day",successStreak:"Success Streak",streakPrint:"consecutive print",streakPrints:"{{count}} consecutive prints",printerStats:"Printer Stats",hours:"hours",avgPrints:"Avg. prints",noArchiveData:"No print data available",filamentByTime:"Time",avgWeight:"Avg. weight",avgTime:"Avg. time",filamentByPrints:"Prints",timeframe:{today:"Today","this-week":"This Week","this-month":"This Month","last-7":"Last 7 Days","last-30":"Last 30 Days","last-90":"Last 90 Days","this-year":"This Year","all-time":"All Time",custom:"Custom Range",from:"From",to:"To"},allUsers:"All Users",noUser:"No User (System)",filterByUser:"Filter by User"},maintenance:{title:"Maintenance",overview:"Overview",allOk:"All maintenance up to date",dueCount:"{{count}} item due",dueCount_plural:"{{count}} items due",warningCount:"{{count}} warning",warningCount_plural:"{{count}} warnings",totalPrintTime:"Total Print Time",nextMaintenance:"Next Maintenance",nothingDue:"Nothing due",tasks:"Tasks",lastPerformed:"Last performed",interval:"Interval",hoursRemaining:"{{hours}}h remaining",hoursOverdue:"{{hours}}h overdue",markDone:"Mark as Done",performMaintenance:"Perform Maintenance",history:"History",noHistory:"No maintenance history",editPrintHours:"Edit Print Hours",currentHours:"Current Hours",statusTab:"Status",settingsTab:"Settings",overdueCount:"{{count}} overdue",dueSoonCount:"{{count}} due soon",dueSoon:"Due soon",allGood:"All good",overdueBy:"Overdue by {{duration}}",dueIn:"Due in {{duration}}",timeLeft:"{{duration}} left",day:"1 day",days:"{{count}} days",week:"1 week",weeks:"{{count}} weeks",month:"1 month",months:"{{count}} months",year:"1 year",maintenanceTypes:"Maintenance Types",maintenanceTypesDescription:"System types and your custom maintenance tasks",addCustomType:"Add Custom Type",restoreDefaults:"Restore Default Tasks",intervalType:"Interval Type",intervalValue:"Interval ({{type}})",icon:"Icon",documentationLink:"Documentation Link (optional)",assignToPrinters:"Assign to Printers",selectAtLeastOnePrinter:"Select at least one printer",addType:"Add Type",custom:"Custom",printHours:"Print Hours",calendarDays:"Calendar Days",exampleName:"e.g., Replace HEPA Filter",viewDocumentation:"View documentation",timeBasedInterval:"Time-based interval",intervalOverrides:"Interval Overrides",intervalOverridesDescription:"Customize intervals for specific printers",assignedToPrinters:"Assigned to printers:",noPrintersAssigned:"No printers assigned",addPrinterShort:"Add:",printersAssignedClick:"{{count}} printer(s) assigned - click to manage",removeFromPrinter:"Remove from this printer",types:{lubricateCarbonRods:"Lubricate Carbon Rods",lubricateRails:"Lubricate Linear Rails",cleanNozzle:"Clean Nozzle/Hotend",checkBelts:"Check Belt Tension",cleanBuildPlate:"Clean Build Plate",checkExtruder:"Check Extruder Gears",checkCooling:"Check Cooling Fans",generalInspection:"General Inspection",cleanCarbonRods:"Clean Carbon Rods",lubricateSteelRods:"Lubricate Steel Rods",cleanSteelRods:"Clean Steel Rods",cleanLinearRails:"Clean Linear Rails",checkPtfeTube:"Check PTFE Tube",replaceHepaFilter:"Replace HEPA Filter",replaceCarbonFilter:"Replace Carbon Filter",lubricateLeftNozzleRail:"Lubricate Left Nozzle Rail"},maintenanceComplete:"Maintenance marked as complete",typeUpdated:"Maintenance type updated",typeDeleted:"Maintenance type deleted",defaultsRestored:"Restored {{count}} default task(s)",printHoursUpdated:"Print hours updated",printerAssigned:"Printer assigned",printerRemoved:"Printer removed",deleteTypeConfirm:'Delete "{{name}}"?',deleteSystemTypeTitle:"Delete default maintenance task?",deleteSystemTypeMessage:'Are you sure you want to delete the default maintenance task "{{name}}"?',noPermissionUpdate:"You do not have permission to update maintenance items",noPermissionPerform:"You do not have permission to perform maintenance",noPermissionEditTypes:"You do not have permission to edit maintenance types",noPermissionDeleteTypes:"You do not have permission to delete maintenance types",noPermissionEditHours:"You do not have permission to edit print hours",noPermissionRemovePrinter:"You do not have permission to remove printer assignments",noPermissionAssignPrinter:"You do not have permission to assign printers",noPermissionEditIntervals:"You do not have permission to edit intervals",configureSettings:"Configure maintenance types and intervals"},settings:{title:"Settings",general:"General",tabs:{general:"General",smartPlugs:"Smart Plugs",notifications:"Notifications",queue:"Workflow",filament:"Filament",network:"Network",apiKeys:"API Keys",virtualPrinter:"Virtual Printer",spoolbuddy:"SpoolBuddy",failureDetection:"Failure Detection",users:"Authentication",backup:"Backup",emailAuth:"Email Authentication",ldap:"LDAP",twoFa:"Two-Factor Auth",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy devices",infoBody:"SpoolBuddy kiosks register themselves automatically via heartbeat. Unregister a device here if it is no longer in use or if a stale duplicate was left behind by a daemon crash.",duplicatesTitle:"{{count}} devices registered",duplicatesBody:"Only the first registered device is used by the kiosk UI. If one of these is a stale duplicate from a crash, unregister it — an online device will re-register itself on its next heartbeat.",empty:"No SpoolBuddy devices registered yet.",online:"Online",offline:"Offline",unregister:"Unregister",unregisterSuccess:"Device unregistered",unregisterError:"Failed to unregister device",confirmTitle:"Unregister SpoolBuddy device?",confirmBody:'This will remove "{{hostname}}" ({{deviceId}}) from the database. If the device is online, it will re-register itself on its next heartbeat.',ipAddress:"IP address",firmware:"Firmware",lastSeen:"Last seen",daemonUptime:"Daemon uptime",systemUptime:"System uptime",never:"never",nfc:"NFC",scale:"Scale",cpuTemp:"CPU temp",memory:"Memory",disk:"Disk",update:"Update",updateConfirmTitle:"Update Spoolbuddy daemon?",updateConfirmBody:'Trigger a software update on "{{hostname}}"? The daemon will restart once the update is applied.',restartBrowser:"Restart Browser",restartBrowserConfirmTitle:"Restart kiosk browser?",restartBrowserConfirmBody:'Restart the kiosk browser on "{{hostname}}"? The display will blank briefly.',restartDaemon:"Restart Daemon",restartDaemonConfirmTitle:"Restart Spoolbuddy daemon?",restartDaemonConfirmBody:'Restart the Spoolbuddy daemon on "{{hostname}}"? The device will go offline for a few seconds.',reboot:"Reboot",rebootConfirmTitle:"Reboot device?",rebootConfirmBody:'Reboot "{{hostname}}"? The device will be offline for around a minute.',shutdown:"Shutdown",shutdownConfirmTitle:"Shutdown device?",shutdownConfirmBody:'Shutdown "{{hostname}}"? You will need physical access to power it back on.',commandConfirm:"Confirm",commandQueued:"Command queued",commandError:"Failed to send command"},ldap:{title:"LDAP Authentication",enabledDesc:"LDAP authentication is enabled",disabledDesc:"LDAP authentication is disabled",disabledHint:"Configure and save LDAP settings below, then enable.",enabled:"LDAP authentication enabled",disabled:"LDAP authentication disabled",feature1:"Users can login with LDAP credentials",feature2:"Local admin account remains as fallback",feature3:"LDAP groups are mapped to BamBuddy groups on login",serverConfig:"LDAP Server Configuration",serverUrl:"Server URL",serverUrlHint:"Use ldaps:// for SSL or ldap:// with StartTLS",security:"Security",securityHint:"StartTLS upgrades a plain connection to TLS. LDAPS uses TLS from the start.",bindDn:"Bind DN (Service Account)",bindPassword:"Bind Password",searchBase:"Search Base DN",userFilter:"User Search Filter",userFilterHint:"{username} is replaced with the login username. Use (uid={username}) for OpenLDAP.",autoProvision:"Auto-provision users",autoProvisionHint:"Automatically create a BamBuddy account on first LDAP login",defaultGroup:"Default group",defaultGroupNone:"— None (no fallback) —",defaultGroupHint:"Fallback group assigned when an LDAP user authenticates but is not listed in any mapped LDAP group. Leave empty to leave unmapped users without permissions.",groupMapping:"Group Mapping (JSON)",groupMappingHint:"Map LDAP group DNs to BamBuddy groups. Available groups: ",testConnection:"Test Connection",settingsSaved:"LDAP settings saved",errors:{serverRequired:"LDAP server URL is required",searchBaseRequired:"Search base DN is required",enableAuthFirst:"Enable authentication first",configureLdapFirst:"Save LDAP settings first"}},email:{smtpSettings:"SMTP Configuration",smtpHost:"SMTP Server",smtpPort:"SMTP Port",security:"Security",authentication:"Authentication",username:"Username",password:"Password",fromEmail:"From Email",fromName:"From Name",testConnection:"Test SMTP Connection",testRecipient:"Test Recipient Email",sendTest:"Send Test Email",sending:"Sending...",save:"Save Settings",saving:"Saving...",advancedAuth:"Advanced Authentication",advancedAuthEnabled:"Advanced Authentication is enabled",advancedAuthEnabledDesc:"Email-based user management features are active. New users will receive auto-generated passwords via email, and users can reset their passwords through the forgot password feature.",advancedAuthDisabled:"Advanced Authentication is disabled",advancedAuthDisabledDesc:"Enable advanced authentication to activate email-based features for user management.",enable:"Enable",disable:"Disable",feature1:"Passwords are auto-generated and emailed to new users",feature2:"Users can login with username or email",feature3:"Forgot password feature is available",feature4:"Admins can reset user passwords via email",errors:{requiredFields:"Please fill in all required fields",usernameRequired:"Username is required when authentication is enabled",enterTestEmail:"Please enter a test email address",smtpServerAndEmail:"Please fill in SMTP Server and From Email before testing",usernamePasswordRequired:"Username and Password are required when authentication is enabled",configureSmtpFirst:"Please configure and test SMTP settings first",enableAuthFirst:"Please enable authentication first to use email-based features."},success:{settingsSaved:"SMTP settings saved successfully"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"None (Port 25)"},authOptions:{enabled:"Enabled",disabled:"Disabled"}},appearance:"Appearance",notifications:"Notifications",smartPlugs:"Smart Plugs",spoolman:"Spoolman",updates:"Updates",language:"Language",languageDescription:"Select your preferred language",theme:"Theme",themeLight:"Light",themeDark:"Dark",themeSystem:"System",defaultView:"Default View",defaultViewDescription:"Page to show when opening the app",checkForUpdates:"Check for Updates",autoUpdate:"Auto Update",currentVersion:"Current Version",latestVersion:"Latest Version",upToDate:"You are up to date",updateAvailable:"Update available",notificationLanguage:"Notification Language",notificationLanguageDescription:"Language for push notifications",bedCooledThreshold:"Bed Cooled Threshold",bedCooledThresholdDescription:"Temperature below which the bed is considered cooled after a print",userNotificationsEnabled:"User Notifications",userNotificationsEnabledDescription:"Enable the user notifications menu and email notifications for print job events. Requires Advanced Authentication.",userNotificationsDisabledHint:"Enable Advanced Authentication to use user notifications.",notificationProviders:"Notification Providers",addProvider:"Add Provider",editProvider:"Edit Provider",providerType:"Provider Type",testNotification:"Test Notification",testSuccess:"Test notification sent successfully",testFailed:"Failed to send test notification",quietHours:"Quiet Hours",quietHoursDescription:"Do not disturb during these hours",quietHoursStart:"Start",quietHoursEnd:"End",events:{title:"Notification Events",printStart:"Print Started",printComplete:"Print Completed",printFailed:"Print Failed",printStopped:"Print Stopped",printProgress:"Progress Milestones",printProgressDescription:"Notify at 25%, 50%, 75%",printerOffline:"Printer Offline",printerError:"Printer Error",filamentLow:"Low Filament",maintenanceDue:"Maintenance Due",maintenanceDueDescription:"Notify when maintenance is needed"},smartPlug:{title:"Smart Plugs",add:"Add Smart Plug",edit:"Edit Smart Plug",name:"Name",ipAddress:"IP Address",linkedPrinter:"Linked Printer",autoOn:"Auto Power On",autoOnDescription:"Turn on when print starts",autoOff:"Auto Power Off",autoOffDescription:"Turn off after print completes",offDelay:"Off Delay",offDelayMinutes:"Minutes after print",offDelayTemp:"When nozzle below temperature",currentState:"Current State",turnOn:"Turn On",turnOff:"Turn Off"},filamentTracking:"Filament Tracking",filamentTrackingDesc:"Choose how to track your filament spools. You can use the built-in inventory or connect an external Spoolman server.",filamentChecks:"Filament checks",disableFilamentWarnings:"Disable filament warnings",disableFilamentWarningsDesc:"Don't show warnings about insufficient filament when printing or queueing",preferLowestFilament:"Prefer lowest remaining filament",preferLowestFilamentDesc:"When multiple spools match, use the one with the least filament remaining",trackingModeBuiltIn:"Built-in Inventory",trackingModeBuiltInDesc:"RFID auto-matching and usage tracking included",trackingModeSpoolmanDesc:"External filament management server",builtInFeatureRfid:"Automatically detects Bambu Lab RFID spools in AMS",builtInFeatureUsage:"Tracks filament consumption per print",builtInFeatureCatalog:"Manage spools, colors, and K-factor profiles",builtInFeatureThirdParty:"Third-party spools can be assigned to inventory spools",amsSyncButton:"Sync Weights from AMS",amsSyncTitle:"Sync Spool Weights from AMS",amsSyncMessage:"This will overwrite all inventory spool weights with the current AMS remain% values from connected printers. Use this to recover from corrupted weight data. Printers must be online.",amsSyncing:"Syncing...",amsSyncSuccess:"{{synced}} spool(s) synced, {{skipped}} skipped",amsSyncError:"Failed to sync weights from AMS",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL of your Spoolman server (e.g., http://localhost:7912)",spoolmanConnected:"Connected",spoolmanDisconnected:"Disconnected",status:"Status",connect:"Connect",disconnect:"Disconnect",howSyncWorks:"How Sync Works",syncInfoRfidOnly:"Only official Bambu Lab spools with RFID are synced",syncInfoAutoCreate:"New spools are auto-created in Spoolman on first sync",syncInfoThirdPartySkipped:"Non-Bambu Lab spools (third-party, refilled) are skipped",linkingExistingSpools:"Linking Existing Spools",linkingExistingSpoolsDesc:'To link existing Spoolman spools to your AMS, hover over an AMS slot and click "Link to Spoolman".',syncMode:"Sync Mode",syncModeAuto:"Automatic",syncModeManual:"Manual Only",syncModeAutoDesc:"AMS data syncs automatically when changes are detected",syncModeManualDesc:"Only sync when manually triggered",syncAmsData:"Sync AMS Data",syncAmsDataDesc:"Manually sync printer AMS data to Spoolman",allPrinters:"All Printers",noDefaultPrinter:"No default (ask each time)",sidebarOrder:"Sidebar order",saveThumbnails:"Save thumbnails",captureFinishPhoto:"Capture finish photo",noPrintersConfigured:"No printers configured",archiveMode:{always:"Always create archive entry",never:"Never create archive entry",ask:"Ask each time"},checkForUpdatesLabel:"Check for updates",checkPrinterFirmware:"Check printer firmware",includeBetaUpdates:"Include beta versions",includeBetaUpdatesDesc:"Notify about beta and prerelease versions when checking for updates",enableRetry:"Enable retry",homeAssistantDescription:"Control smart plugs via Home Assistant",environmentManagedLabel:"(Environment Managed)",autoEnabledViaEnv:"Automatically enabled via environment variables",urlFromEnvReadOnly:"Value set by HA_URL environment variable (read-only)",tokenFromEnvReadOnly:"Value set by HA_TOKEN environment variable (read-only)",mqttConnectedTo:"Connected to",prometheusDescription:"Expose printer data in Prometheus format",noSmartPlugsTitle:"No smart plugs configured",noSmartPlugsDescription:"Add a Tasmota-based smart plug to track energy usage and automate power control.",noProvidersTitle:"No providers configured",noProvidersDescription:"Add a provider to receive alerts.",noTemplatesAvailable:"No templates available. Restart the backend to seed default templates.",apiPermissionView:"View printer status and queue",apiPermissionEdit:"Add and remove items from print queue",apiKeysEmptyTitle:"No API keys",apiKeysEmptyDescription:"Create an API key to integrate with external services.",noUsersFound:"No users found",noGroupsFound:"No groups found",noGroupsAvailable:"No groups available",passwordsDoNotMatch:"Passwords do not match",systemGroupWarning:"System group names cannot be changed",authDisabledTitle:"Authentication is Disabled",authDisabledFeature1:"Require login to access the system",authDisabledFeature2:"Create multiple users with group-based permissions",authDisabledFeature3:"Control access with 50+ granular permissions",userHasCreated:"This user has created:",userItemsQuestion:"What would you like to do with these items?",deleteUserConfirm:"Are you sure you want to delete this user?",actionCannotBeUndone:"This action cannot be undone.",addFirstSmartPlug:"Add Your First Smart Plug",providers:"Providers",log:"Log",testAll:"Test All",testResults:"Test Results",testPassedCount:"{{count}} passed",testFailedCount:"{{count}} failed",messageTemplates:"Message Templates",messageTemplatesDescription:"Customize notification messages for each event.",apiKeys:"API Keys",apiKeysDescription:"Create API keys for external integrations and webhooks.",createKey:"Create Key",apiKeyCreated:"API Key Created Successfully",apiKeyCopyWarning:"Copy this key now - it won't be shown again!",useInApiBrowser:"Use in API Browser",createNewApiKey:"Create New API Key",keyName:"Key Name",keyNamePlaceholder:"e.g., Home Assistant, OctoPrint",readStatus:"Read Status",readStatusDescription:"View printer status and queue",manageQueue:"Manage Queue",manageQueueDescription:"Add and remove items from print queue",controlPrinter:"Control Printer",controlPrinterDescription:"Pause, resume, and stop prints",unnamedKey:"Unnamed Key",lastUsed:"Last used",read:"Read",control:"Control",createFirstKey:"Create Your First Key",webhookEndpoints:"Webhook Endpoints",webhookApiKeyHint:"Use your API key in the X-API-Key header.",webhook:{getAllStatus:"Get all printer status",getSpecificStatus:"Get specific printer status",addToQueue:"Add to print queue",pausePrint:"Pause print",resumePrint:"Resume print",stopPrint:"Stop print"},apiBrowser:"API Browser",apiBrowserDescription:"Explore and test all available API endpoints.",apiKeyForTesting:"API Key for Testing",apiKeyPlaceholder:"Paste your API key here to test authenticated endpoints...",apiKeyHint:"This key will be sent as X-API-Key header with requests.",deleteApiKeyTitle:"Delete API Key",deleteApiKeyMessage:"Are you sure you want to delete this API key? Any integrations using this key will stop working.",deleteKey:"Delete Key",amsDisplayThresholds:"AMS Display Thresholds",amsThresholdsDescription:"Configure color thresholds for AMS humidity and temperature indicators.",humidity:"Humidity",goodGreen:"Good (green)",fairOrange:"Fair (orange)",aboveFairBad:"Above fair threshold shows as red (bad)",fairAlsoDryingThreshold:"This threshold is also used to trigger auto-drying when enabled",temperature:"Temperature",goodBlue:"Good (blue)",aboveFairHot:"Above fair threshold shows as red (hot)",historyRetention:"History Retention",keepSensorHistory:"Keep sensor history for",historyRetentionDescription:"Older humidity and temperature data will be automatically deleted",defaultPrintOptions:"Default Print Options",defaultPrintOptionsDescription:"Set default values for print options when starting new prints. These can be overridden per print in the print dialog.",defaultBedLevelling:"Bed Levelling",defaultBedLevellingDesc:"Auto-level bed before print",defaultFlowCali:"Flow Calibration",defaultFlowCaliDesc:"Calibrate extrusion flow",defaultVibrationCali:"Vibration Calibration",defaultVibrationCaliDesc:"Reduce ringing artifacts",defaultLayerInspect:"First Layer Inspection",defaultLayerInspectDesc:"AI inspection of first layer",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Record timelapse video",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Plate-Clear Confirmation",requirePlateClear:"Require plate-clear confirmation",requirePlateClearDescription:'When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disabling this also hides the plate status badge and the "Mark plate as cleared" button on printer cards.',gcodeInjection:"G-code Injection",gcodeInjectionDescription:'Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.',gcodeInjectionNoPrinters:"No printers found. Add printers to configure G-code snippets.",gcodeStartLabel:"Start G-code",gcodeEndLabel:"End G-code",gcodeStartPlaceholder:"G-code prepended before the print starts...",gcodeEndPlaceholder:"G-code appended after the print ends...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Queue Auto-Drying",queueDryingDescription:"Automatically dry AMS filament when printer is idle between queued prints. Uses humidity threshold above to trigger drying.",queueDryingEnabled:"Enable auto-drying",queueDryingEnabledDescription:"Start AMS drying automatically when printer is idle and humidity is above threshold",queueDryingBlock:"Wait for drying to complete",queueDryingBlockDescription:"Block the print queue until drying finishes. When off, prints take priority over drying.",ambientDryingEnabled:"Ambient drying",ambientDryingEnabledDescription:"Automatically dry filament on idle printers when humidity exceeds threshold, even without queued prints.",dryingPresets:"Drying Presets",dryingPresetsDescription:"Temperature and duration per filament type. AMS 2 Pro uses lower temps, AMS-HT supports higher temps.",dryingFilament:"Filament",printModal:"Print Modal",expandCustomMapping:"Expand custom mapping by default",expandCustomMappingDescription:"When printing to multiple printers, show per-printer AMS mapping expanded",authentication:"Authentication",authEnabledDescription:"Your instance is secured with user authentication",authDisabledDescription:"Enable to require login and manage user access",authDisabledMessage:"Enable authentication to create user accounts, manage permissions, and secure your Bambuddy instance.",enableAuthentication:"Enable Authentication",currentUser:"Current User",changePassword:"Change Password",admin:"Admin",users:"Users",addUser:"Add User",groups:"Groups",addGroup:"Add Group",system:"System",noDescription:"No description",userCount:"{{count}} users",permissionCount:"{{count}} permissions",createUser:"Create User",username:"Username",enterUsername:"Enter username",password:"Password",enterPassword:"Enter password (min 6 characters)",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm password",viewReleaseOnGitHub:"View release on GitHub",turnAllPlugsOn:"Turn all plugs on",turnAllPlugsOff:"Turn all plugs off",clearNotificationLogs:"Clear Notification Logs",clearLogsMessage:"This will permanently delete all notification logs older than 30 days. This action cannot be undone.",clearLogs:"Clear Logs",resetUiPreferences:"Reset UI Preferences",resetUiPreferencesMessage:"This will reset all UI preferences to defaults: sidebar order, theme, dashboard layout, view modes, and sorting preferences. Your printers, archives, and server settings will NOT be affected. The page will reload after clearing.",resetPreferences:"Reset Preferences",deleteGroupTitle:"Delete Group",deleteGroupMessage:"Are you sure you want to delete this group? Users in this group will lose these permissions.",deleteGroup:"Delete Group",disableAuthenticationTitle:"Disable Authentication",disableAuthenticationMessage:"Are you sure you want to disable authentication? This will make your Bambuddy instance accessible without login. All users will remain in the database but authentication will be disabled.",disableAuthentication:"Disable Authentication",configureBambuddy:"Configure Bambuddy",systemDefault:"System Default",archiveSettings:"Archive Settings",newWindow:"New Window",embeddedOverlay:"Embedded Overlay",preferredSlicer:"Preferred Slicer",preferredSlicerDescription:"Choose which slicer application to open files with",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"External Cameras",costTracking:"Cost Tracking",printsOnly:"Prints Only",totalConsumption:"Total Consumption",dataManagement:"Data Management",storageUsage:"Storage Usage",storageUsageDescription:"Breakdown of data usage by category",storageUsageTotal:"Total",storageUsageErrors:"Errors",storageUsageOtherBreakdown:"Other (includes static assets, scripts, and configuration files)",storageUsageSystem:"System",storageUsageData:"Data",storageUsageUnavailable:"Storage usage information unavailable",clearNotificationLogsDescription:"Delete notification logs older than 30 days",resetUiPreferencesDescription:"Reset sidebar order, theme, view modes, and layout preferences. Printers, archives, and settings are not affected.",enableHomeAssistant:"Enable Home Assistant",enableMqtt:"Enable MQTT",useTls:"Use TLS",enableMetricsEndpoint:"Enable Metrics Endpoint",availableMetrics:"Available Metrics",editUser:"Edit User",deleteUserTitle:"Delete User",groupName:"Group Name",leaveEmptyForAnonymous:"Leave empty for anonymous",leaveEmptyForNoAuth:"Leave empty for no authentication",enterNewPassword:"Enter new password",confirmNewPassword:"Confirm new password",enterGroupName:"Enter group name",enterDescriptionOptional:"Enter description (optional)",enterCurrentPassword:"Enter current password",enterNewPasswordMin6:"Enter new password (min 6 characters)",toast:{keyCopied:"Key copied to clipboard",copyFailed:"Failed to copy key",keyAddedToBrowser:"Key added to API Browser",clearLogsFailed:"Failed to clear logs",uiPreferencesReset:"UI preferences reset. Refreshing...",authDisabled:"Authentication disabled successfully",authDisableFailed:"Failed to disable authentication",apiKeyCreated:"API key created",apiKeyDeleted:"API key deleted",userCreated:"User created successfully",userUpdated:"User updated successfully",userDeleted:"User deleted successfully",groupCreated:"Group created successfully",groupUpdated:"Group updated successfully",groupDeleted:"Group deleted successfully",fillRequiredFields:"Please fill in all required fields",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters",enterGroupName:"Please enter a group name",settingsSaved:"Settings saved",noPermissionUpdate:"You do not have permission to change settings",cameraSettingsSaved:"Camera settings saved",enterCameraUrl:"Please enter a camera URL",passwordChanged:"Password changed successfully",connectionFailed:"Connection failed",testFailed:"Test failed",cameraConnected:"Camera connected{{resolution}}"},testConnection:"Test Connection",catalog:{spoolCatalog:"Spool Catalog",spoolCatalogDescription:"Empty spool weights by brand/type. Used for automatic weight lookup when adding spools.",searchCatalog:"Search catalog...",addNewEntry:"Add New Entry",namePlaceholder:"Name (e.g., Bambu Lab - Plastic)",weight:"Weight",type:"Type",default:"Default",custom:"Custom",noMatch:"No entries match your search",empty:"No entries in catalog",deleteEntry:"Delete Entry",deleteConfirm:'Are you sure you want to delete "{{name}}"?',resetCatalog:"Reset Catalog",resetConfirm:"Reset catalog to defaults? This will remove all custom entries.",loadFailed:"Failed to load spool catalog",nameWeightRequired:"Name and weight are required",entryAdded:"Entry added",addFailed:"Failed to add entry",entryUpdated:"Entry updated",updateFailed:"Failed to update entry",entryDeleted:"Entry deleted",deleteFailed:"Failed to delete entry",resetSuccess:"Catalog reset to defaults",resetFailed:"Failed to reset catalog",exported:"Exported {{count}} entries",imported:"Imported {{added}} entries ({{skipped}} skipped)",importFailed:"Failed to import: invalid JSON format",exportTooltip:"Export catalog to JSON",importTooltip:"Import catalog from JSON",resetTooltip:"Reset to defaults",selectedCount:"{{count}} selected",deleteSelected:"Delete Selected",bulkDeleteConfirm:"Are you sure you want to delete {{count}} entries?",bulkDeleted:"Deleted {{count}} entries",bulkDeleteFailed:"Failed to delete entries"},colorCatalog:{title:"Color Catalog",description:"Filament colors by manufacturer/material. Used for automatic color lookup when adding spools.",searchColors:"Search colors...",allManufacturers:"All manufacturers",addNewColor:"Add New Color",manufacturer:"Manufacturer",colorName:"Color Name",hex:"Hex",materialOptional:"Material (optional)",showing:"Showing {{filtered}} of {{total}} colors",noMatch:"No colors match your search",empty:"No colors in catalog",deleteColor:"Delete Color",deleteConfirm:'Are you sure you want to delete "{{name}}"?',resetCatalog:"Reset Color Catalog",resetConfirm:"Reset catalog to defaults? This will remove all custom colors.",sync:"Sync",starting:"Starting...",syncTooltip:"Sync from FilamentColors.xyz (2000+ colors, may take a minute)",loadFailed:"Failed to load color catalog",fieldsRequired:"Manufacturer, color name, and hex color are required",colorAdded:"Color added",addFailed:"Failed to add color",colorUpdated:"Color updated",updateFailed:"Failed to update color",colorDeleted:"Color deleted",deleteFailed:"Failed to delete color",resetSuccess:"Color catalog reset to defaults",resetFailed:"Failed to reset catalog",syncUpToDate:"Already up to date ({{count}} colors checked)",syncComplete:"Added {{added}} new colors ({{skipped}} already existed)",syncError:"Sync error",syncFailed:"Failed to sync from FilamentColors.xyz",exported:"Exported {{count}} colors",imported:"Imported {{added}} colors ({{skipped}} skipped)",importFailed:"Failed to import: invalid JSON format",selectedCount:"{{count}} selected",deleteSelected:"Delete Selected",bulkDeleteConfirm:"Are you sure you want to delete {{count}} colors?",bulkDeleted:"Deleted {{count}} colors",bulkDeleteFailed:"Failed to delete colors"},dateFormat:"Date Format",dateFormatUs:"US (MM/DD/YYYY)",dateFormatEu:"EU (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"Time Format",timeFormat12:"12-hour (3:30 PM)",timeFormat24:"24-hour (15:30)",defaultPrinter:"Default Printer",defaultPrinterDescription:"Pre-select this printer for uploads, reprints, and other operations.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Drag items in the sidebar to reorder. Reset to default order here.",setDefault:"Set Default",sidebarOrderSetDefaultHint:"Set default applies the current menu order to users who haven't customized theirs.",sidebarDefaultSet:"Default menu order has been set.",sidebarDefaultCleared:"Default menu order cleared.",sidebarDefaultFailed:"Failed to set default menu order.",reset:"Reset",darkMode:"Dark Mode",lightMode:"Light Mode",active:"(active)",background:"Background",accent:"Accent",style:"Style",bgNeutral:"Neutral",bgWarm:"Warm",bgCool:"Cool",bgOled:"OLED Black",bgSlate:"Slate Blue",bgForest:"Forest Green",accentGreen:"Green",accentTeal:"Teal",accentBlue:"Blue",accentOrange:"Orange",accentPurple:"Purple",accentRed:"Red",styleClassic:"Classic",styleGlow:"Glow",styleVibrant:"Vibrant",themeToggleHint:"Toggle between dark and light mode using the sun/moon icon in the sidebar.",autoArchivePrints:"Auto-archive prints",autoArchiveDescription:"Automatically save 3MF files when prints complete",saveThumbnailsDescription:"Extract and save preview images from 3MF files",captureFinishPhotoDescription:"Take a photo from printer camera when print completes",ffmpegNotInstalled:"ffmpeg not installed",ffmpegRequired:"Camera capture requires ffmpeg. Install it via <brew>brew install ffmpeg</brew> (macOS) or <apt>apt install ffmpeg</apt> (Linux).",camera:"Camera",cameraViewMode:"Camera View Mode",cameraOverlayDescription:"Camera opens in a resizable overlay on the main screen",cameraWindowDescription:"Camera opens in a separate browser window",externalCamerasDescription:"Configure external cameras to replace the built-in printer camera. Supports MJPEG streams, RTSP, HTTP snapshots, and USB cameras (V4L2). When enabled, the external camera is used for live view and finish photos.",cameraPlaceholderUsb:"Device path (/dev/video0)",cameraPlaceholderUrl:"Camera URL (rtsp://... or http://...)",cameraTypeMjpeg:"MJPEG Stream",cameraTypeRtsp:"RTSP Stream",cameraTypeSnapshot:"HTTP Snapshot",cameraTypeUsb:"USB Camera (V4L2)",cameraRotation:"Rotation",test:"Test",connected:"Connected",disconnected:"Disconnected",currency:"Currency",defaultFilamentCost:"Default filament cost (per kg)",electricityCost:"Electricity cost per kWh",energyDisplayMode:"Energy display mode",energyModePrintDescription:"Dashboard shows sum of energy used during prints",energyModeTotalDescription:"Dashboard shows lifetime energy from smart plugs",fileManager:"File Manager",createArchiveEntry:"Create Archive Entry When Printing",createArchiveEntryDescription:"When printing from File Manager, optionally create an archive entry",lowDiskSpaceWarning:"Low Disk Space Warning",lowDiskSpaceDescription:"Show warning when free disk space falls below this threshold",printerFirmware:"Printer Firmware",checkFirmwareDescription:"Check for printer firmware updates from Bambu Lab",bambuddySoftware:"Bambuddy Software",autoCheckDescription:"Automatically check for new versions on startup",checkNow:"Check now",updateAvailableVersion:"Update available: v{{version}}",releaseNotes:"Release Notes",updateViaDocker:"Update via Docker Compose:",updateViaHomeAssistant:"Updates are managed by the Home Assistant Supervisor. Open Settings → Add-ons → Bambuddy in Home Assistant to install the new version.",installUpdate:"Install Update",latestVersionRunning:"You're running the latest version",failedToCheckUpdates:"Failed to check for updates: {{error}}",backupRestore:"Backup & Restore",backupRestoreDescription:"Export/import settings and configure GitHub backup",goToBackup:"Go to Backup",externalUrl:"External URL",externalUrlDescription:"The external URL where Bambuddy is accessible. Used for notification images and external integrations.",bambuddyUrl:"Bambuddy URL",externalUrlHint:"Include protocol and port (e.g., http://192.168.1.100:8000)",ftpRetry:"FTP Retry",ftpRetryDescription:"Retry FTP operations when printer WiFi is unreliable. Applies to 3MF downloads, print uploads, timelapse downloads, and firmware updates.",autoRetryDescription:"Automatically retry failed FTP operations",retryAttempts:"Retry attempts",retryDelay:"Retry delay",connectionTimeout:"Connection timeout",time_one:"{{count}} time",time_other:"{{count}} times",second_one:"{{count}} second",second_other:"{{count}} seconds",nSeconds:"{{count}} seconds",increaseForWeakWifi:"Increase for printers with weak WiFi",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Connect to Home Assistant to control smart plugs via HA's REST API. Supports switch, light, input_boolean, and script entities.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Long-Lived Access Token",haTokenHint:"Create a token in HA: Profile → Long-Lived Access Tokens → Create Token",connectionSuccessful:"Connection Successful",connectionFailed:"Connection Failed",haConnectionSuccess:"Successfully connected to Home Assistant.",haConnectionFailed:"Failed to connect to Home Assistant.",mqttPublishing:"MQTT Publishing",mqttDescription:"Publish BamBuddy events to an external MQTT broker for integration with Node-RED, Home Assistant, and other automation systems.",mqttEnableDescription:"Publish events to external MQTT broker",brokerHostname:"Broker hostname",port:"Port",usernameOptional:"Username (optional)",passwordOptional:"Password (optional)",topicPrefix:"Topic prefix",topicPrefixHint:"Topics will be: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Prometheus Metrics",prometheusEndpointDescription:"Expose printer metrics at <code>/api/v1/metrics</code> for Prometheus/Grafana monitoring.",bearerTokenOptional:"Bearer Token (optional)",bearerTokenHint:"If set, requests must include <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Connection status",metricsPrinterState:"Printer state (idle/printing/etc)",metricsPrintProgress:"Print progress 0-100%",metricsBedTemp:"Bed temperature",metricsNozzleTemp:"Nozzle temperature",metricsPrintsTotal:"Total prints by result",metricsMore:"...and more (layers, fans, queue, filament usage)",smartPlugsDescription:"Connect smart plugs (Tasmota or Home Assistant) to automate power control and track energy usage for your printers.",allOn:"All On",allOff:"All Off",addSmartPlug:"Add Smart Plug",energySummary:"Energy Summary",currentPower:"Current Power",plugsOnline:"{{reachable}}/{{total}} plugs online",today:"Today",yesterday:"Yesterday",total:"Total",enablePlugsForSummary:"Enable plugs to see energy summary",addNotificationProvider:"Add",systemBadge:"(System)",creating:"Creating...",changing:"Changing...",deleteUserAndItems:"Delete user AND their items",deleteUserKeepItems:"Delete user, keep items (become ownerless)",ok:"OK",twoFa:{totpTitle:"Authenticator App (TOTP)",totpDesc:"Use an authenticator app like Google Authenticator, Aegis or Authy.",emailOtpTitle:"Email OTP",emailOtpDesc:"Send a one-time code to {{email}} when you log in.",emailOtpNoEmail:"Add an email address to your account to enable this method.",addEmailFirst:"Your account has no email address. Ask an admin to add one before enabling Email OTP.",setupTotp:"Set up Authenticator App",setupAuthApp:"Set up Authenticator App",setupInstructions:"Scan the QR code below with your authenticator app, then confirm with a code.",manualEntry:"Can't scan? Enter this secret manually:",scannedContinue:"I've scanned the code — continue",enterCodeToConfirm:"Enter the 6-digit code from your authenticator app to confirm setup.",activate:"Activate",disableTotp:"Disable Authenticator",disableConfirmHint:"Enter a valid TOTP code or a backup code to disable the authenticator.",totpDisabled:"Authenticator app disabled.",emailOtpEnabled:"Email OTP enabled.",emailOtpDisabled:"Email OTP disabled.",smtpRequired:"Please configure and test SMTP settings first.",invalidCode:"Invalid code. Please try again.",enableEmailOtp:"Enable Email OTP",disableEmailOtp:"Disable Email OTP",emailSetupEnterCode:"A verification code has been sent to your email address. Enter it below to confirm you own this inbox.",verifyAndEnable:"Verify & Enable",emailDisablePasswordHint:"Enter your account password to confirm disabling email OTP.",passwordPlaceholder:"Enter your password",backupCodesTitle:"Save your backup codes",backupCodesWarning:"Save these codes somewhere safe. Each code can only be used once and they will not be shown again.",backupCodesRemaining:"{{count}} backup codes remaining",savedCodes:"I've saved my codes",regenBackup:"Regenerate Backup Codes",regenBackupHint:"Enter your current TOTP code to generate 10 new backup codes. All existing backup codes will be invalidated.",newBackupCodes:"New backup codes",linkedAccounts:"Linked SSO Accounts",linkedAccountsDesc:"These external identity providers are linked to your account.",oidcUnlinked:"Account unlinked."},oidc:{title:"SSO / OIDC Providers",desc:"Configure OpenID Connect providers to allow single sign-on via external identity providers.",addProvider:"Add Provider",newProvider:"New Provider",empty:"No OIDC providers configured yet.",created:"Provider created.",updated:"Provider updated.",deleted:"Provider deleted.",deleteTitle:"Delete Provider",deleteMessage:'Delete "{{name}}"? All linked user accounts will be disconnected.',form:{name:"Display Name",issuerUrl:"Issuer URL",clientId:"Client ID",clientSecret:"Client Secret",scopes:"Scopes",iconUrl:"Icon URL (optional)",enabled:"Enabled",autoCreate:"Auto-create users",autoCreateDesc:"Automatically create a local account on first login.",autoLink:"Auto-link existing accounts",autoLinkDesc:"Link existing local accounts by matching email on first login.",secretHint:"leave blank to keep current",secretPlaceholder:"new secret",emailClaim:"Email Claim",emailClaimDesc:"JWT claim used as email identity. Use 'preferred_username' or 'upn' for Azure Entra ID (which does not send email_verified). Only use trusted claim names.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"Require email verified",requireEmailVerifiedDesc:"Only accept the email claim when the provider marks it as verified.",requireEmailVerifiedWarning:"Warning: email will be accepted even without verification. Use only with trusted providers.",requireEmailVerifiedAutoLink:"Disable auto-link first to change this setting."}}},notification:{printStarted:{title:"Print Started",body:"{{printer}}: {{filename}} has started printing"},printCompleted:{title:"Print Completed",body:"{{printer}}: {{filename}} completed successfully"},printFailed:{title:"Print Failed",body:"{{printer}}: {{filename}} has failed"},printStopped:{title:"Print Stopped",body:"{{printer}}: {{filename}} was stopped"},printProgress:{title:"Print Progress",body:"{{printer}}: {{filename}} is {{percent}}% complete"},printerOffline:{title:"Printer Offline",body:"{{printer}} is offline"},printerError:{title:"Printer Error",body:"{{printer}}: {{error}}"},filamentLow:{title:"Low Filament",body:"{{printer}}: Filament is running low"},maintenanceDue:{title:"Maintenance Due",body:"{{printer}}: {{items}} need attention"}},errors:{generic:"Something went wrong",networkError:"Network error. Please check your connection.",notFound:"Not found",unauthorized:"Unauthorized",serverError:"Server error",validationError:"Please check your input",printerConnectionFailed:"Failed to connect to printer",saveFailed:"Failed to save changes",deleteFailed:"Failed to delete",loadFailed:"Failed to load data"},hmsErrors:{title:"Errors - {{name}}",noErrors:"No errors",viewOnWiki:"View on Bambu Lab Wiki",clearInstructions:"Clear errors on the printer to dismiss them here.",clearErrors:"Clear Errors",clearSuccess:"HMS errors cleared",clearFailed:"Failed to clear HMS errors"},mqttDebug:{title:"MQTT Debug Log",searchPlaceholder:"Search topic or payload...",noMessages:"No messages logged yet",startLoggingHint:'Click "Start Logging" to begin capturing MQTT messages',noMessagesMatch:"No messages match your filter",adjustFilterHint:"Try adjusting your search or filter criteria",incoming:"Incoming",outgoing:"Outgoing",loggingStopped:"Logging stopped",loggingActive:"Logging active - messages will auto-refresh",startLogging:"Start Logging",stopLogging:"Stop Logging",clearLog:"Clear Log",topic:"Topic",timestamp:"Timestamp",direction:"Direction",all:"All"},printerFiles:{title:"File Manager",storageUsed:"Used:",storageFree:"Free:",filterPlaceholder:"Filter files...",deleteButton:"Delete",deleteFiles:"Delete {{count}} Files",deleteFileConfirm:'Delete "{{name}}"? This cannot be undone.',deleteFilesConfirm:"Delete {{count}} selected files? This cannot be undone.",noFiles:"No files on printer",loadingFiles:"Loading files...",failedToLoad:"Failed to load files",toast:{filesDeleted:"Deleted {{count}} file(s)",deleteFailed:"Delete failed: {{error}}"}},confirm:{delete:"Are you sure you want to delete this?",unsavedChanges:"You have unsaved changes. Are you sure you want to leave?",clearQueue:"Are you sure you want to clear the queue?"},login:{title:"Bambuddy Login",subtitle:"Sign in to your account",username:"Username",usernamePlaceholder:"Enter your username",usernameOrEmail:"Username or Email",usernameOrEmailPlaceholder:"Username or @ Email",password:"Password",passwordPlaceholder:"Enter your password",signIn:"Sign in",signingIn:"Logging in...",rememberMe:"Remember Me",forgotPassword:"Forgot your password?",loginSuccess:"Logged in successfully",loginFailed:"Login failed",enterCredentials:"Please enter username and password",enterEmail:"Please enter your email address",oidcLoginFailed:"OIDC login failed",oidcErrors:{providerError:"The identity provider returned an error",missingParameters:"OIDC callback is missing required parameters",invalidState:"OIDC state is invalid or has already been used",stateExpired:"OIDC login session expired — please try again",providerNotFound:"OIDC provider not found",discoveryFailed:"Failed to fetch OIDC discovery document",invalidDiscovery:"OIDC discovery document is invalid",networkError:"Network error during OIDC token exchange",badResponse:"Unexpected response during OIDC token exchange",noIdToken:"OIDC provider did not return an ID token",validationFailed:"OIDC token validation failed",nonceMismatch:"OIDC nonce mismatch — possible replay attack",missingSubClaim:"OIDC token is missing the sub claim",noLinkedAccount:"No local account is linked to this OIDC identity",accountInactive:"Your account is inactive",userResolutionFailed:"Failed to resolve your account",internalError:"An internal error occurred during OIDC login",tokenExchangeFailed:"OIDC token exchange failed"},forgotPasswordTitle:"Forgot Password",forgotPasswordMessage:"If you've forgotten your password, please contact your system administrator to reset it.",forgotPasswordEmailMessage:"Enter your email address and we'll send you a new password.",emailAddress:"Email Address",emailPlaceholder:"your.email@example.com",cancel:"Cancel",sending:"Sending...",sendResetEmail:"Send Reset Email",howToReset:"How to reset your password:",resetStep1:"Contact your Bambuddy administrator",resetStep2:"Ask them to reset your password in User Management",resetStep3:"They can set a new temporary password for you",resetStep4:"Log in with the new password and change it in Settings",gotIt:"Got it",resetPassword:{title:"Set New Password",subtitle:"Enter and confirm your new password below.",newPassword:"New Password",newPasswordPlaceholder:"At least 8 characters",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Repeat new password",saving:"Saving…",submit:"Set New Password",backToLogin:"Back to login",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 8 characters",resetFailed:"Password reset failed. The link may have expired."},twoFA:{title:"Two-Factor Authentication",subtitle:"Your account is protected with 2FA. Enter the verification code below.",methodAuthenticator:"Authenticator App",methodEmail:"Email Code",methodBackup:"Backup Code",instructionsTotp:"Open your authenticator app and enter the 6-digit code for Bambuddy.",instructionsEmail:"A 6-digit code has been sent to your email address. It expires in 10 minutes.",instructionsEmailNotSent:"Click the button below to receive a verification code via email.",instructionsBackup:"Enter one of your 8-character backup recovery codes. Each code can only be used once.",sendCodeButton:"Send Code via Email",sendingCode:"Sending...",resendCode:"Resend code",codeLabel:"Verification Code",backupCodeLabel:"Backup Code",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verify",verifyingButton:"Verifying...",backToLogin:"← Back to login",orContinueWith:"or continue with",signInWith:"Sign in with {{provider}}",enterCode:"Please enter the verification code",sendCodeFailed:"Failed to send verification code",invalidCode:"Invalid code. Please try again."}},setup:{title:"Bambuddy Setup",subtitle:"Configure authentication for your Bambuddy instance",enableAuth:"Enable Authentication",adminAccount:"Admin Account",adminAccountDesc:"If admin users already exist, authentication will be enabled using the existing admin accounts. Leave the fields below empty to use existing admins, or enter new credentials to create a new admin user.",adminUsername:"Admin Username",adminPassword:"Admin Password",optionalIfAdminExists:"(optional if admin users exist)",adminUsernamePlaceholder:"Enter admin username (optional)",adminPasswordPlaceholder:"Enter admin password (optional)",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm admin password",settingUp:"Setting up...",completeSetup:"Complete Setup",toast:{authEnabledAdminCreated:"Authentication enabled and admin user created",authEnabledExistingAdmins:"Authentication enabled using existing admin users",setupCompleted:"Setup completed",enterBothCredentials:"Please enter both admin username and password, or leave both empty to use existing admin users",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters"}},changePassword:{title:"Change Password",currentPassword:"Current Password",currentPasswordPlaceholder:"Enter current password",newPassword:"New Password",newPasswordPlaceholder:"Enter new password (min 6 characters)",confirmPassword:"Confirm New Password",confirmPasswordPlaceholder:"Confirm new password",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters",changing:"Changing...",success:"Password changed successfully",failed:"Failed to change password"},plateAlert:{title:"Print Paused!",message:"Objects detected on build plate. The print has been automatically paused. Please clear the plate and resume the print.",understand:"I Understand"},camera:{title:"Camera View",invalidPrinterId:"Invalid printer ID",live:"Live",snapshot:"Snapshot",restartStream:"Restart stream",refreshSnapshot:"Refresh snapshot",fullscreen:"Fullscreen",exitFullscreen:"Exit fullscreen",connectingToCamera:"Connecting to camera...",capturingSnapshot:"Capturing snapshot...",connectionLost:"Connection lost",connectionFailed:"Camera connection failed",reconnecting:"Reconnecting in {{countdown}}s... (attempt {{attempt}}/{{max}})",reconnectNow:"Reconnect now",cameraUnavailable:"Camera unavailable",cameraUnavailableDesc:"Make sure the printer is powered on and connected.",noCamera:"No camera available",retry:"Retry",cameraStream:"Camera stream",zoomOut:"Zoom out",zoomIn:"Zoom in",resetZoom:"Reset zoom",recording:"Recording",startRecording:"Start Recording",stopRecording:"Stop Recording",chamberLight:"Toggle chamber light"},groups:{title:"Group Management",subtitle:"Manage permission groups for access control",backToSettings:"Back to Settings",createGroup:"Create Group",noPermission:"You do not have permission to access this page.",system:"System",noDescription:"No description",usersCount:"{{count}} users",permissionsCount:"{{count}} permissions",edit:"Edit",delete:"Delete",toast:{created:"Group created successfully",updated:"Group updated successfully",deleted:"Group deleted successfully",enterGroupName:"Please enter a group name"},modal:{editGroup:"Edit Group",createGroup:"Create Group",cancel:"Cancel",saving:"Saving...",creating:"Creating...",saveChanges:"Save Changes"},form:{groupName:"Group Name",groupNamePlaceholder:"Enter group name",systemGroupWarning:"System group names cannot be changed",description:"Description",descriptionPlaceholder:"Enter description (optional)",permissions:"Permissions ({{count}} selected)"},deleteModal:{title:"Delete Group",message:"Are you sure you want to delete this group? Users in this group will lose these permissions.",confirm:"Delete Group"},editor:{title:"Edit Group",createTitle:"Create Group",search:"Search permissions...",selectAll:"Select All",clearAll:"Clear All",permissionsSelected:"{{count}} selected",noResults:"No permissions match your search"}},users:{title:"User Management",subtitle:"Manage users and their access to your Bambuddy instance",backToSettings:"Back to Settings",createUser:"Create User",noPermission:"You do not have permission to access this page.",admin:"Admin",noGroups:"No groups",active:"Active",inactive:"Inactive",edit:"Edit",delete:"Delete",system:"System",noGroupsAvailable:"No groups available",table:{username:"Username",groups:"Groups",status:"Status",actions:"Actions"},toast:{created:"User created successfully",updated:"User updated successfully",deleted:"User deleted successfully",fillRequired:"Please fill in all required fields",passwordsDoNotMatch:"Passwords do not match",passwordTooShort:"Password must be at least 6 characters"},modal:{createUser:"Create User",editUser:"Edit User",cancel:"Cancel",creating:"Creating...",saving:"Saving...",saveChanges:"Save Changes",advancedAuthSubtitle:"with Advanced Authentication"},form:{username:"Username",usernamePlaceholder:"Enter username",email:"Email",emailPlaceholder:"user@example.com",password:"Password",passwordPlaceholder:"Enter password",confirmPassword:"Confirm Password",confirmPasswordPlaceholder:"Confirm password",newPasswordPlaceholder:"Enter new password",confirmNewPasswordPlaceholder:"Confirm new password",leaveBlankToKeep:"leave blank to keep current",groups:"Groups",optional:"optional",autoGeneratedPassword:"A secure password will be automatically generated and emailed to the user.",passwordManagedByAdvancedAuth:'Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.',resetPassword:"Reset Password",resettingPassword:"Resetting Password..."},deleteModal:{title:"Delete User",message:"Are you sure you want to delete this user? This action cannot be undone.",confirm:"Delete User"}},streamOverlay:{title:"Stream Overlay",invalidPrinterId:"Invalid printer ID",cameraStream:"Camera stream",progress:"Progress",eta:"ETA",printerIdle:"Printer is idle",printerOffline:"Printer offline",status:{printing:"Printing",paused:"Paused",finished:"Finished",failed:"Failed",idle:"Idle",unknown:"Unknown"}},profiles:{title:"Profiles",subtitle:"Manage your slicer presets and pressure advance calibrations",tabs:{cloud:"Cloud Profiles",local:"Local Profiles",kprofiles:"K-Profiles"},localProfiles:{title:"Local Profiles",subtitle:"Import and manage slicer presets from OrcaSlicer",import:"Import Profiles",importDesc:"Drop .bbscfg, .bbsflmt, .orca_filament, .zip, or .json files here",importing:"Importing...",search:"Search local presets...",noPresets:"No local presets yet",badge:"Local",edit:"Edit",delete:"Delete",cancel:"Cancel",deleteConfirmTitle:"Delete Preset",deleteConfirm:"Are you sure you want to delete this preset? This cannot be undone.",source:"Source",inheritsFrom:"Inherits",filamentType:"Type",vendor:"Vendor",compatiblePrinters:"Printers",nozzleTemp:"Nozzle Temp",cost:"Cost",density:"Density",pressureAdvance:"Pressure Advance",filament:"Filament",process:"Process",printer:"Printer",toast:{importSuccess:"{{count}} preset(s) imported",importSkipped:"{{count}} preset(s) skipped (duplicates)",importError:"{{count}} error(s) during import",deleted:"Preset deleted",updated:"Preset updated"}},connectedAs:"Connected as",logout:"Logout",noLogoutPermission:"You do not have permission to logout",failedToLoad:"Failed to load profiles",retry:"Retry",time:{justNow:"Just now",minsAgo:"{{count}}m ago",hoursAgo:"{{count}}h ago",daysAgo:"{{count}}d ago"},toast:{loggedOut:"Logged out"},login:{title:"Connect to Bambu Cloud",subtitle:"Sync your slicer presets across devices",email:"Email",password:"Password",region:"Region",regionGlobal:"Global",regionChina:"China",verificationCode:"Verification Code",totpCode:"Authenticator Code",checkEmail:"Check your email ({{email}}) for a 6-digit code",enterTotpHint:"Enter the 6-digit code from your authenticator app",accessToken:"Access Token",accessTokenHint:"Paste your Bambu Lab access token (from Bambu Studio)",back:"Back",loginButton:"Login",verifyButton:"Verify",setTokenButton:"Set Token",useToken:"Use access token instead",useEmail:"Login with email instead",toast:{loggedIn:"Logged in successfully",codeSent:"Verification code sent to your email",enterTotp:"Enter code from your authenticator app",tokenSet:"Token set successfully"}},presets:{myPreset:"My preset (editable)",duplicate:"Duplicate",editable:"Editable",failedToLoadDetails:"Failed to load preset details",deleteConfirm:"Delete this preset?",deleteWarning:'This will permanently delete "{{name}}" from Bambu Cloud. This cannot be undone.',noDuplicatePermission:"You do not have permission to duplicate presets",noEditPermission:"You do not have permission to edit presets",noDeletePermission:"You do not have permission to delete presets",types:{filament:"Filament preset",printer:"Printer preset",process:"Process preset"},toast:{deleted:"Preset deleted",created:"Preset created",updated:"Preset updated",duplicated:"Preset duplicated",fieldAdded:'Field "{{key}}" added',exported:"Preset exported"},baseLabel:"Base: {{name}}",currentLabel:"Current: {{name}}",newPreset:"New Preset",editPreset:"Edit Preset",duplicatePreset:"Duplicate Preset",createNewPreset:"Create New Preset",customizeSettings:"Customize settings for your new preset",compareWithBase:"Compare with base preset",compare:"Compare",basePreset:"Base Preset",selectBasePreset:"Select base preset...",presetName:"Preset Name",myCustomPreset:"My custom preset",inheritsFrom:"Inherits from",dropJsonToImport:"Drop JSON to import",tabs:{common:"Common",allFields:"All Fields"},availableFields:"Available Fields",searchFieldsPlaceholder:"Search fields...",noMatchingFields:"No matching fields",allFieldsAdded:"All fields added",addCustomField:"Add custom field",yourOverrides:"Your Overrides",noOverridesYet:"No overrides yet",clickFieldsToAdd:"Click fields on the left to add them",saveAsTemplate:"Save as template",jsonTip:"Tip: Drag & drop a .json file anywhere on this modal to import settings"},cloudView:{searchPlaceholder:"Search presets...",templates:"Templates",refresh:"Refresh",newPreset:"New Preset",clearFilters:"Clear filters",compareMode:"Compare Mode",selectAnotherPreset:"Select another {{type}} preset",clickTwoPresets:"Click two presets of the same type to compare",selectFirst:"1. Select first",selectSecond:"2. Select second",compareNow:"Compare Now",lastSynced:"Last synced:",showingCount:"Showing {{showing}} of {{total}} presets",noPresetsFound:"No presets found",columns:{filament:"Filament",process:"Process",printer:"Printer"},noFilamentPresets:"No filament presets",noProcessPresets:"No process presets",noPrinterPresets:"No printer presets",filters:{type:"Type",owner:"Owner",printer:"Printer",nozzle:"Nozzle",filament:"Filament",layer:"Layer",all:"All",myPresets:"My Presets",builtIn:"Built-in",process:"Process"},noTemplatesPermission:"You do not have permission to manage templates",noRefreshPermission:"You do not have permission to refresh profiles",noCreatePermission:"You do not have permission to create presets"},templates:{title:"Quick Templates",noTemplates:"No templates yet",createFirst:"Create templates from the preset editor",typeFilter:"Type:",deleteTitle:"Delete Template",deleteWarning:"This action cannot be undone",deleteConfirm:'Are you sure you want to delete "{{name}}"?',namePlaceholder:"Template name",descriptionPlaceholder:"Description",settingsJson:"Settings (JSON)",fieldsCount:"{{count}} fields",shownInModals:"Shown in modals",hiddenInModals:"Hidden in modals",apply:"Apply",toast:{deleted:"Template deleted",updated:"Template updated",created:"Template created",applied:"Template applied"}}},support:{debugLoggingActive:"Debug logging is active",manageLogs:"Manage",collectItem7:"Printer connectivity and firmware versions",collectItem8:"Integration status (Spoolman, MQTT, HA)",collectItem9:"Network interfaces (subnets only)",collectItem10:"Python package versions",collectItem11:"Database health checks",collectItem12:"Docker environment details"},fileManager:{title:"File Manager",subtitle:"Organize and manage your print files",uploadFiles:"Upload Files",newFolder:"New Folder",folderName:"Folder Name",folderNamePlaceholder:"e.g., Functional Parts",renameFile:"Rename File",renameFolder:"Rename Folder",moveFiles:"Move {{count}} File(s)",rootNoFolder:"Root (No Folder)",current:"current",linkFolder:"Link Folder",linkFolderDescription:'Link "{{name}}" to a project or archive for quick access.',project:"Project",archive:"Archive",noProjectsFound:"No projects found",noArchivesFound:"No archives found",unlink:"Unlink",link:"Link",dragDropFiles:"Drag & drop files here",dropFilesHere:"Drop files here",orClickToBrowse:"or click to browse",allFileTypesSupported:"All file types supported. ZIP files will be extracted.",zipFilesDetected:"ZIP files detected",zipExtractOptions:"ZIP files will be extracted. Choose how to handle folder structure:",preserveZipStructure:"Preserve folder structure from ZIP",createFolderFromZip:"Create folder from ZIP filename",stlThumbnailGeneration:"STL thumbnail generation",zipMayContainStl:"ZIP files may contain STL files. Thumbnails can be generated during extraction.",thumbnailsCanBeGenerated:"Thumbnails can be generated for STL files. Large models may take longer to process.",generateThumbnailsForStl:"Generate thumbnails for STL files",threemfDetected:"3MF files detected",threemfExtractionInfo:"Printer model, material, color, and print settings will be automatically extracted from 3MF files.",willBeExtracted:"Will be extracted",filesExtracted:"{{count}} files extracted",uploadComplete:"Upload complete: {{succeeded}} succeeded",uploadFailed:"Upload failed",zipFilesFailed:"{{count}} files failed",uploading:"Uploading...",changeLink:"Change Link...",linkTo:"Link to...",linkToProjectOrArchive:"Link to project or archive",addToQueue:"Add to Queue",schedulePrint:"Schedule",generateThumbnail:"Generate Thumbnail",generateThumbnails:"Generate Thumbnails",generateThumbnailsForMissing:"Generate thumbnails for STL files missing them",gridView:"Grid view",listView:"List view",lowDiskSpaceWarning:"Low disk space warning",lowDiskSpaceDetails:"Only {{free}} free of {{total}} total. Threshold is set to {{threshold}} GB in settings.",files:"Files",folders:"Folders",size:"Size",free:"Free",allFiles:"All Files",wrap:"Wrap",enableTextWrapping:"Enable text wrapping",disableTextWrapping:"Disable text wrapping",collapse:"Collapse",collapseFoldersByDefault:"Collapse folders by default",expandFoldersByDefault:"Expand folders by default",dragToResizeTooltip:"Drag to resize, double-click to reset",searchFiles:"Search files...",allTypes:"All types",prints:"Prints",ascending:"Ascending",descending:"Descending",resultsCount:"{{showing}} of {{total}} files",selectAll:"Select All",deselectAll:"Deselect All",selected:"{{count}} selected",adding:"Adding...",loadingFiles:"Loading files...",folderIsEmpty:"Folder is empty",noFilesYet:"No files yet",folderEmptyDescription:"Upload files or move files into this folder to get started.",noFilesDescription:"Upload files to start organizing your print-related files.",noMatchingFiles:"No matching files",noMatchingFilesDescription:"No files match your current search or filter criteria.",clearFilters:"Clear filters",printedCount:"Printed {{count}}x",uploadedBy:"Uploaded By",deleteFolder:"Delete Folder",deleteFile:"Delete File",deleteFilesCount:"Delete {{count}} Files",deleteFolderConfirm:"Are you sure you want to delete this folder? All files inside will also be deleted.",deleteFileConfirm:"Are you sure you want to delete this file?",deleteFilesConfirm:"Are you sure you want to delete {{count}} selected files? This action cannot be undone.",deleting:"Deleting...",noPermissionRenameFolder:"You do not have permission to rename folders",noPermissionLinkFolder:"You do not have permission to link folders",noPermissionDeleteFolder:"You do not have permission to delete folders",noPermissionPrint:"You do not have permission to print",noPermissionAddToQueue:"You do not have permission to add to queue",noPermissionSlice:"You do not have permission to slice files",noPermissionDownload:"You do not have permission to download files",noPermissionRenameFile:"You do not have permission to rename this file",noPermissionGenerateThumbnail:"You do not have permission to generate thumbnails",noPermissionDeleteFile:"You do not have permission to delete this file",noPermissionCreateFolder:"You do not have permission to create folders",noPermissionUpload:"You do not have permission to upload files",noPermissionMoveFiles:"You do not have permission to move files",noPermissionDeleteFiles:"You do not have permission to delete files",linkExternal:"Link External",linkExternalFolder:"Link External Folder",linkExternalFolderDescription:"Mount a host directory (NAS, USB, network share) into the File Manager. Files are not copied — they are accessed directly from the original path.",externalFolderNamePlaceholder:"e.g., NAS Prints",externalPath:"Host Path",externalPathHelp:"Absolute path to the directory on the Docker host. Must be bind-mounted into the container.",readOnly:"Read Only",readOnlyHelp:"prevents uploads and deletions",showHiddenFiles:"Show hidden files (dotfiles)",externalFolder:"External Folder",scanFolder:"Scan",toast:{folderCreated:"Folder created",folderDeleted:"Folder deleted",fileDeleted:"File deleted",filesDeleted:"Deleted {{count}} files",filesMoved:"Files moved",folderLinked:"Folder linked",folderUnlinked:"Folder unlinked",externalFolderLinked:"External folder linked and scanned",folderScanned:"Scan complete: {{added}} added, {{removed}} removed",addedToQueue:"Added {{count}} file(s) to queue",addedToQueuePartial:"Added {{added}} file(s), {{failed}} failed",failedToAddToQueue:"Failed to add files: {{error}}",fileRenamed:"File renamed",folderRenamed:"Folder renamed",thumbnailsGenerated:"Generated {{count}} thumbnail(s)",thumbnailsGeneratedPartial:"Generated {{succeeded}} thumbnail(s), {{failed}} failed",noStlMissingThumbnails:"No STL files missing thumbnails",failedToGenerateThumbnails:"Failed to generate thumbnails: {{error}}",thumbnailGenerated:"Thumbnail generated",failedToGenerateThumbnail:"Failed to generate thumbnail: {{error}}"}},projects:{title:"Projects",subtitle:"Organize and track your 3D printing projects",newProject:"New Project",editProject:"Edit Project",deleteProject:"Delete Project",projectName:"Project Name",description:"Description",noProjects:"No projects yet",noProjectsFiltered:"No {{status}} projects",noProjectsFilteredHelp:"You don't have any {{status}} projects. Projects will appear here when their status changes.",createFirst:"Create your first project to start organizing related prints, tracking progress, and managing your builds.",createFirstButton:"Create Your First Project",create:"Create",files:"Files",prints:"Prints",plates:"plates",parts:"parts",lastModified:"Last Modified",deleteConfirm:"Are you sure you want to delete this project? Archives and queue items will be unlinked but not deleted.",addFiles:"Add Files",removeFile:"Remove File",viewDetails:"View Details",namePlaceholder:"e.g., Voron 2.4 Build",descriptionPlaceholder:"Optional description...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URL must start with http:// or https://",openExternalUrl:"Open project URL",coverImageLabel:"Cover photo",coverImageAlt:"Project cover photo",coverImageUpload:"Upload",coverImageReplace:"Replace",coverImageRemove:"Remove",color:"Color",targetPlates:"Target Plates",targetPlatesPlaceholder:"e.g., 25",targetPlatesHelp:"Number of print jobs",targetParts:"Target Parts",targetPartsPlaceholder:"e.g., 150",targetPartsHelp:"Total objects needed",tagsLabel:"Tags (comma-separated)",tagsPlaceholder:"e.g., voron, functional, gift",dueDate:"Due Date",priority:"Priority",priorityLow:"Low",priorityNormal:"Normal",priorityHigh:"High",priorityUrgent:"Urgent",statusActive:"Active",statusCompleted:"Completed",statusArchived:"Archived",done:"Done",completed:"completed",failed:"failed",inQueue:"in queue",noPrintsYet:"No prints yet",printJobs:"Print jobs (plates)",partsPrinted:"Parts printed",failedParts:"Failed parts",import:"Import",export:"Export",importProject:"Import project",exportAll:"Export all projects",loading:"Loading projects...",noEditPermission:"You do not have permission to edit projects",noDeletePermission:"You do not have permission to delete projects",noCreatePermission:"You do not have permission to create projects",noImportPermission:"You do not have permission to import projects",noExportPermission:"You do not have permission to export projects",toast:{created:"Project created",updated:"Project updated",deleted:"Project deleted",imported:"Project imported",multipleImported:"{{count}} projects imported",importFailed:"Import failed",exported:"Projects exported (metadata only)"}},projectDetail:{notFound:"Project not found",backToProjects:"Back to Projects",export:"Export",exportProject:"Export project",noExportPermission:"You do not have permission to export projects",noEditPermission:"You do not have permission to edit projects",partOf:"Part of:",priorityLabel:"Priority:",noPrints:"No prints in this project yet",status:{active:"Active",completed:"Completed",archived:"Archived"},priority:{low:"Low",normal:"Normal",high:"High",urgent:"Urgent"},dueDate:{overdue:"Overdue",today:"Due today",daysLeft:"{{count}} days left"},progress:{platesProgress:"Plates Progress",partsProgress:"Parts Progress",printJobs:"print jobs",parts:"parts",percentComplete:"{{percent}}% complete",remaining:"{{count}} remaining"},stats:{printJobs:"Print Jobs",total:"total",failed:"{{count}} failed",partsPrinted:"{{count}} parts printed",printTime:"Print Time",filamentUsed:"Filament Used"},cost:{title:"Cost Tracking",filamentCost:"Filament Cost",energy:"Energy",totalCost:"Total Cost",total:"Total",includesBom:"incl. BOM",budget:"Budget",remaining:"Remaining"},subProjects:{title:"Sub-projects ({{count}})"},notes:{title:"Notes",noEditPermission:"You do not have permission to edit notes",placeholder:"Add notes about this project...",empty:"No notes yet. Click Edit to add notes."},files:{title:"Files",linkFolders:"Link folders from the File Manager",forQuickAccess:"to this project for quick access.",fileCount:"{{count}} file(s)",empty:"No folders linked. Go to File Manager and link a folder to this project.",noFiles:"No files in this folder.",print:"Print Now",addToQueue:"Add to Queue"},bom:{title:"Bill of Materials",acquired:"{{completed}}/{{total}} acquired",showAll:"Show all",hideDone:"Hide done",addPart:"Add Part",noAddPermission:"You do not have permission to add parts",partNamePlaceholder:"Part name (e.g., M3x8 screws)",partName:"Part name",qty:"Qty",price:"Price ({{currency}})",sourcingUrlPlaceholder:"Sourcing URL (optional)",remarksPlaceholder:"Remarks (optional)",deletePart:"Delete Part",deleteConfirm:'Are you sure you want to delete "{{name}}"?',noUpdatePermission:"You do not have permission to update parts",noEditPermission:"You do not have permission to edit parts",noDeletePermission:"You do not have permission to delete parts",totalCost:"Total cost:",empty:"No parts in the bill of materials. Add hardware, electronics, or other components to track what needs to be sourced."},timeline:{title:"Activity Timeline",empty:"No activity yet."},template:{saveAsTemplate:"Save as Template",noCreatePermission:"You do not have permission to create templates"},queue:{title:"Queue",viewAll:"View all",printing:"{{count}} printing",queued:"{{count}} queued"},prints:{title:"Prints ({{count}})"},toast:{projectUpdated:"Project updated",partAdded:"Part added",partRemoved:"Part removed",exportFailed:"Export failed",projectExported:"Project exported",templateCreated:"Template created"}},system:{title:"System Information",version:"Version",uptime:"Uptime",cpuUsage:"CPU Usage",memoryUsage:"Memory Usage",diskUsage:"Disk Usage",networkInfo:"Network Info",logs:"Logs",debugMode:"Debug Mode",enableDebug:"Enable Debug Logging",disableDebug:"Disable Debug Logging",downloadLogs:"Download Logs",clearLogs:"Clear Logs",dockerInfo:"Docker Info",containerName:"Container Name",imageName:"Image Name",platform:"Platform",architecture:"Architecture"},library:{title:"Filament Library",addFilament:"Add Filament",editFilament:"Edit Filament",deleteFilament:"Delete Filament",vendor:"Vendor",material:"Material",color:"Color",kFactor:"K Factor",temperature:"Temperature",noFilaments:"No filaments in library",deleteConfirm:"Are you sure you want to delete this filament?",importFromPrinter:"Import from Printer",exportToFile:"Export to File"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Spoolman Integration",enabled:"Spoolman Enabled",url:"Spoolman URL",connected:"Connected",disconnected:"Not Connected",testConnection:"Test Connection",sync:"Sync",syncing:"Syncing...",lastSync:"Last Sync",linkToSpoolman:"Link to Spoolman",openInSpoolman:"Open in Spoolman",unlinkSpool:"Unlink Spool",unlinkConfirmTitle:"Unlink Spool?",unlinkConfirmMessage:"This will disconnect the spool from Spoolman. The spool data in Spoolman will remain unchanged.",selectSpool:"Select Spool",noUnlinkedSpools:"No unlinked spools available",linkSuccess:"Spool linked to Spoolman successfully",linkFailed:"Failed to link spool",unlinkSuccess:"Spool unlinked from Spoolman successfully",unlinkFailed:"Failed to unlink spool",spoolId:"Spool ID",fillSourceLabel:"(Spoolman)",weight:"Weight",remaining:"Remaining",disableWeightSync:"Disable AMS Estimated Weight Sync",disableWeightSyncDesc:"Don't update remaining capacity from AMS estimates. Use this if you prefer Spoolman's usage tracking over AMS percentage-based estimates. New spools will still use the AMS estimate as their initial weight.",reportPartialUsage:"Report Partial Usage for Failed Prints",reportPartialUsageDesc:"When a print fails or is cancelled, report the estimated filament used up to that point based on layer progress."},inventory:{title:"Spool Inventory",spoolmanMixedContentTitle:"Spoolman can't load over HTTPS — mixed-content blocked by your browser",spoolmanMixedContentBody:"Bambuddy is served over HTTPS (via your reverse proxy), but your Spoolman URL is still plain HTTP. Browsers block mixed content for security, so the embedded Spoolman UI can't render. Spoolman needs to be reachable over HTTPS for this to work.",spoolmanMixedContentFixReverseProxy:"Put Spoolman behind the same reverse proxy as Bambuddy (Traefik / Nginx / Caddy) with HTTPS, then update the Spoolman URL in Settings to the new HTTPS address.",spoolmanMixedContentFixOpenNewTab:"As a workaround, open Spoolman in a new browser tab over HTTP — mixed-content rules only apply to embedded frames, so a standalone tab still works.",spoolmanOpenInNewTab:"Open Spoolman in a new tab",addSpool:"Add Spool",editSpool:"Edit Spool",material:"Material",selectMaterial:"Select material...",subtype:"Subtype",brand:"Brand",searchBrand:"Search brand...",useCustomBrand:'Use "{{brand}}"',useCustomMaterial:"Use custom material: {{material}}",colorName:"Color Name",colorNamePlaceholder:"Jade White, Fire Red...",color:"Color",hexColor:"Hex Color",pickColor:"Pick custom color",labelWeight:"Label Weight",coreWeight:"Empty Spool Weight",searchSpoolWeight:"Search spool weight...",weightUsed:"Used",currentWeight:"Remaining Weight",measuredWeight:"Measured Weight",spoolName:"Spool",costPerKg:"Cost per kg",measuredWeightError:"Measured weight must be between {{min}}g and {{max}}g.",slicerFilament:"Slicer Filament",slicerFilamentName:"Slicer Preset Name",slicerPreset:"Slicer Preset",searchPresets:"Search filament presets...",selectedPreset:"Selected",noPresetsFound:"No presets found",tempOverrides:"Temperature Overrides",note:"Note",notePlaceholder:"Any additional notes about this spool...",category:"Category",categoryPlaceholder:"e.g. Production, Prototype, Client A",categoryNone:"Uncategorized",lowStockThresholdOverride:"Low-stock threshold (this spool)",lowStockThresholdOverrideHelp:"Leave blank to use the global threshold ({{global}}%).",clearRfid:"Clear RFID Tag",rfidCleared:"RFID tag cleared",archive:"Archive",restore:"Restore",noSpools:"No spools yet. Add your first spool to get started.",noAvailableSpools:"No spools available. Add a spool to your inventory or unassign one from another slot first.",kProfiles:"K-Profiles",addKProfile:"Add K-Profile",assignSpool:"Assign Spool",unassignSpool:"Unassign",assignSuccess:"Spool assigned and AMS slot configured",assignFailed:"Failed to assign spool",selectSpool:"Select a spool to assign to this slot",assigned:"Assigned",assigning:"Assigning...",searchSpools:"Search spools...",showAllSpools:"Show all spools",allMaterials:"All Materials",filterByBrand:"Filter by brand...",showArchived:"Show archived",quickAdd:"Quick Add (Stock)",quantity:"Quantity",stock:"Stock",configured:"Configured",spoolsCreated:"{{count}} spools created",spoolCreated:"Spool created",spoolUpdated:"Spool updated",spoolDeleted:"Spool deleted",spoolArchived:"Spool archived",spoolRestored:"Spool restored",deleteConfirm:"Are you sure you want to delete this spool? This cannot be undone.",archiveConfirm:"Are you sure you want to archive this spool?",advancedSettings:"Advanced Settings",filamentInfoTab:"Filament Info",paProfileTab:"PA Profile",filamentInfo:"Filament",additional:"Additional",loadingPresets:"Loading cloud presets...",cloudConnected:"Cloud connected",cloudNotConnected:"Cloud not connected (using defaults)",recentColors:"Recent",searchColors:"Search colors...",searchResults:"Search results",allColors:"All colors",commonColors:"Common colors",showLess:"Show less",showAll:"Show all",noColorsFound:"No colors match your search",noResults:"No matches found",extraColorsLabel:"Extra colours",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.",extraColorsInvalid:"Ignored invalid hex: {{tokens}}",colorEffectLabel:"Effect",colorEffect:{none:"None",sparkle:"Sparkle",wood:"Wood",marble:"Marble",glow:"Glow",matte:"Matte",silk:"Silk",galaxy:"Galaxy",rainbow:"Rainbow",metal:"Metal",translucent:"Translucent",gradient:"Gradient",dualColor:"Dual Color",triColor:"Tri Color",multicolor:"Multicolor"},selectMaterialFirst:"Please select a material first in the Filament Info tab.",noPrintersConfigured:"No printers configured. Add printers to use PA profiles.",matchingFilter:"Matching",anyBrand:"Any brand",anyVariant:"Any variant",autoSelect:"Auto-select",matches:"matches",match:"match",noMatches:"No matches",connected:"Connected",offline:"Offline",printerOffline:"Printer is offline. Connect to view calibration profiles.",noKProfilesMatch:"No K-profiles match the selected filament.",leftNozzle:"Left Nozzle",rightNozzle:"Right Nozzle",profilesSelected:"calibration profile(s) selected",totalInventory:"Total Inventory",totalConsumed:"Total Consumed",byMaterial:"By Material",inPrinter:"In Printer",lowStock:"Low Stock",sinceTracking:"Since tracking started",loadedInAms:"Loaded in AMS/Ext",remaining:"Remaining",weightCheck:"Weight Check",lastWeighed:"Last weighed",neverWeighed:"Never weighed",search:"Search spools...",showing:"Showing",to:"to",of:"of",show:"Show",spools:"spools",spool:"spool",page:"Page",noSpoolsMatch:"No results found",noSpoolsMatchDesc:"Try adjusting your search or filters to find what you're looking for.",active:"Active",archived:"Archived",all:"All",used:"Used",new:"New",clearFilters:"Clear filters",table:"Table",cards:"Cards",net:"Net",groupSimilar:"Group",groupedSpools:"{{count}} identical spools",groupedRows:"rows",columns:"Columns",configureColumns:"Configure Columns",configureColumnsDesc:"Drag to reorder columns or use arrows. Toggle visibility with the eye icon.",visible:"visible",reset:"Reset",cancel:"Cancel",applyChanges:"Apply Changes",moveUp:"Move up",moveDown:"Move down",hideColumn:"Hide column",showColumn:"Show column",linkToSpool:"Link to Spool",tagLinked:"Tag linked to spool",tagLinkFailed:"Failed to link tag",tagAlreadyLinked:"Tag already linked to another spool",unknownTag:"Unknown RFID tag detected",usageHistory:"Usage History",noUsageHistory:"No usage recorded yet",printName:"Print Name",weightConsumed:"Weight Consumed",clearHistory:"Clear",historyCleared:"Usage history cleared",fillSourceLabel:"(Inv)",lowStockThresholdError:"Threshold must be between 0.1 and 99.9",assignMismatchTitle:"Material mismatch",assignMismatchMessage:'The selected spool material "{{spoolMaterial}}" does not match the tray material "{{trayMaterial}}" for {{location}}. Assign anyway?',assignMismatchConfirm:"Assign Anyway",assignPartialMismatchMessage:'The spool material "{{spoolMaterial}}" is similar to but not exactly matching "{{trayMaterial}}" in {{location}}. Do you want to proceed?',assignProfileMismatchMessage:'The spool profile "{{spoolProfile}}" does not match the tray profile "{{trayProfile}}" in {{location}}. Do you want to proceed?'},timelapse:{title:"Timelapse",create:"Create Timelapse",download:"Download",delete:"Delete",preview:"Preview",frameRate:"Frame Rate",quality:"Quality",processing:"Processing...",noTimelapses:"No timelapses available"},ams:{title:"AMS",slot:"Slot",empty:"Empty",emptySlot:"Empty slot",unknown:"Unknown",humidity:"Humidity",temperature:"Temperature",filamentType:"Filament Type",filamentColor:"Color",remaining:"Remaining",history:"AMS History",noHistory:"No history available",configureSlot:"Configure Slot",externalSpool:"External Spool",profile:"Profile",kFactor:"K Factor",fill:"Fill",configure:"Configure",used:"used",remainingUnit:"remaining"},printModal:{title:"Start Print",selectPrinter:"Select Printer",selectPlate:"Select Plate",filamentMapping:"Filament Mapping",totalCost:"Total cost:",slotRemainingShort:" - {{grams}}g left",printSettings:"Print Settings",bedLeveling:"Bed Leveling",flowCalibration:"Flow Calibration",vibrationCalibration:"Vibration Calibration",layerInspection:"First Layer Inspection",timelapse:"Timelapse",startPrint:"Start Print",addToQueue:"Add to Queue",cancel:"Cancel",noPrintersAvailable:"No printers available",printerBusy:"Printer is busy",printerOffline:"Printer is offline",sameTypeDifferentColor:"Same type, different color",filamentTypeNotLoaded:"Filament type not loaded",openCalendar:"Open calendar",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Left nozzle",rightNozzleTooltip:"Right nozzle",filamentOverride:"Filament Override",filamentOverrideHint:"Optionally override filaments for model-based assignment. The scheduler will match against your selected filaments instead of the original 3MF values.",originalFilament:"Original",overrideWith:"Override with",resetToOriginal:"Reset to original",insufficientFilamentTitle:"Not enough filament",insufficientFilamentMessage:"Some assigned spools have less filament remaining than this print needs:",insufficientFilamentLine:"{{printer}} - {{slot}}: needs {{required}}g, remaining {{remaining}}g",printAnyway:"Print anyway",forceColorMatch:"Force color match",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Stagger to {{count}} printers",gcodeInjection:"Inject auto-print G-code"},backup:{title:"Backup & Restore",createBackup:"Create Backup",restoreBackup:"Restore Backup",restoreDescription:"Replace all data from a backup file",downloadBackup:"Download Backup",uploadBackup:"Upload Backup",lastBackup:"Last Backup",autoBackup:"Auto Backup",backupNow:"Backup Now",restoreWarning:"Warning: Restoring a backup will overwrite all current data.",includeArchives:"Include Archives",includeSettings:"Include Settings",includeProfiles:"Include Profiles",backupSuccess:"Backup created successfully",restoreSuccess:"Backup restored successfully",backupFailed:"Backup failed",restoreFailed:"Restore failed",restoreNote:"Virtual Printer will be stopped during restore",githubBackup:"GitHub Backup",enabled:"Enabled",cloudLoginRequired:"Bambu Cloud login required. Sign in under Profiles → Cloud Profiles to enable GitHub backup.",cloudLoginRequiredShort:"Cloud login required",githubDescription:"Automatically sync your profiles to a private GitHub repository for backup and version history.",repositoryUrl:"Repository URL",personalAccessToken:"Personal Access Token",tokenSaved:"(saved)",enterNewToken:"Enter new token to update",tokenHint:"Fine-grained token with Contents read/write permission",branch:"Branch",manualOnly:"Manual only",hourly:"Hourly",daily:"Daily",weekly:"Weekly",includeInBackup:"Include in backup",kProfiles:"K-Profiles",kProfilesDescription:"Pressure advance calibration from connected printers",noPrintersConnected:"No printers connected",printersConnected:"{{connected}}/{{total}} connected",cloudProfiles:"Cloud Profiles",cloudProfilesDescription:"Filament, printer, and process presets from Bambu Cloud",appSettings:"App Settings",appSettingsDescription:"Bambuddy configuration (complete database)",spoolInventory:"Spool Inventory",spoolInventoryDescription:"Filament spools, usage history, and cost tracking",printArchives:"Print Archives",printArchivesDescription:"Print history metadata (no gcode/3MF files)",lastBackupAt:"Last backup:",noBackupsYet:"No backups yet",next:"Next:",startingBackup:"Starting backup...",test:"Test",enableBackup:"Enable Backup",testConnection:"Test Connection",enterRepoUrl:"Enter repository URL",enterRepoAndToken:"Enter repository URL and access token",repoRequired:"Repository URL is required",tokenRequired:"Access token is required",githubBackupEnabled:"GitHub backup enabled",tokenUpdated:"Token updated",settingsSaved:"Settings saved",failedToSave:"Failed to save: {{message}}",backupCompleteFiles:"Backup complete - {{count}} files updated",backupSkippedNoChanges:"Backup skipped - no changes",backupFailed2:"Backup failed: {{message}}",clearedLogs:"Cleared {{count}} logs",failedToClearLogs:"Failed to clear logs: {{message}}",history:"History",clear:"Clear",date:"Date",status:"Status",commit:"Commit",localBackup:"Local Backup",localBackupDescription:"Create a complete backup of your Bambuddy data including the database, archives, uploads, and all files.",downloadBackupLabel:"Download Backup",completeBackupZip:"Complete backup: database + all files (ZIP)",download:"Download",preparingBackup:"Preparing backup...",creatingArchive:"Creating backup archive... This may take a while for large archives.",downloadingFile:"Downloading backup file...",backupDownloaded:"Backup downloaded successfully",failedToCreateBackup:"Failed to create backup: {{message}}",restore:"Restore",restoreReplacesAll:"Restore replaces all data.",restoreReplacesAllDetail:"Your current database and files will be completely replaced. A restart is required after restore.",restoreConfirmTitle:"Restore Backup",restoreConfirmMessage:'Are you sure you want to restore from "{{filename}}"? This will completely replace your current database and all files. The application will need to be restarted after restore.',restoreConfirmButton:"Restore Backup",uploadingFile:"Uploading backup file...",backupRestoredRestart:"Backup restored. Please restart Bambuddy.",failedToRestore:"Failed to restore backup. Please check the file format.",reloadNow:"Reload Now",creatingBackup:"Creating Backup",restoringBackup:"Restoring Backup",preparing:"Preparing...",processing:"Processing...",doNotClosePage:"Please do not close this page or navigate away. This operation may take several minutes for large backups.",restoring:"Restoring...",restoreComplete:"Restore Complete",restoreFailed2:"Restore Failed",importSettings:"Import settings from a backup file",pleaseWaitRestoring:"Please wait while your data is being restored",selectBackupFile:"Click to select backup file (.json or .zip)",duplicateHandling:"How duplicate handling works:",matchPrinters:"Printers",matchPrintersBy:"matched by serial number",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"matched by IP address",matchNotificationProviders:"Notification Providers",matchNotificationProvidersBy:"matched by name",matchFilaments:"Filaments",matchFilamentsBy:"matched by name + type + brand",matchArchives:"Archives",matchArchivesBy:"matched by content hash (always skipped)",matchPendingUploads:"Pending Uploads",matchPendingUploadsBy:"matched by filename",matchSettingsTemplates:"Settings & Templates",matchSettingsTemplatesBy:"always overwritten",replaceExisting:"Replace existing data",keepExisting:"Keep existing data",overwriteDescription:"Overwrite items that already exist with backup data",keepDescription:"Only restore items that don't already exist",overwriteCaution:"Caution:",overwriteWarning:"Overwriting will replace your current configurations with data from the backup. Printer access codes are never overwritten for security.",cancel:"Cancel",processingBackup:"Processing backup file...",itemsRestored:"Items Restored",itemsSkipped:"Items Skipped",restored:"Restored",skippedAlreadyExist:"Skipped (already exist)",filesCategory:"Files (3MF, thumbnails, etc.)",andMore:"...and {{count}} more",newApiKeysGenerated:"New API Keys Generated",keysShownOnce:"These keys are only shown once. Copy them now!",copy:"Copy",noDataFound:"No data was found to restore in the backup file.",close:"Close",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Settings",notification_providers:"Notification Providers",notification_templates:"Notification Templates",smart_plugs:"Smart Plugs",printers:"Printers",filaments:"Filaments",maintenance_types:"Maintenance Types",archives:"Archives",projects:"Projects",pending_uploads:"Pending Uploads",external_links:"External Links",api_keys:"API Keys"}},tags:{title:"Tags",addTag:"Add Tag",editTag:"Edit Tag",deleteTag:"Delete Tag",tagName:"Tag Name",tagColor:"Tag Color",noTags:"No tags",deleteConfirm:"Are you sure you want to delete this tag?",manageTags:"Manage Tags"},uploadModal:{title:"Upload 3MF Files",dragDrop:"Drag & drop .3mf files here",or:"or",browseFiles:"Browse Files",extractionInfo:"The printer model will be automatically extracted from the 3MF file metadata.",uploaded:"uploaded",failed:"failed",uploading:"Uploading...",upload:"Upload",uploadFailed:"Upload failed"},editArchive:{title:"Edit Archive",name:"Name",namePlaceholder:"Print name",printer:"Printer",noPrinter:"No printer",project:"Project",noProject:"No project",itemsPrinted:"Items Printed",itemsPrintedHelp:"Number of items produced in this print job",notes:"Notes",notesPlaceholder:"Add notes about this print...",externalLink:"External Link",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link to Printables, Thingiverse, or other source",tags:"Tags",tagsPlaceholder:"Add tags...",addMoreTags:"Add more tags...",matchingTags:'Matching "{{query}}"',existingTags:"Existing tags",clickToAdd:"(click to add)",status:"Status",failureReason:"Failure Reason",selectReason:"Select reason...",photos:"Photos of Printed Result",photosHelp:"Click + to add photos of your printed result",printResult:"Print result",saving:"Saving...",failureReasons:{adhesionFailure:"Adhesion failure",spaghettiDetached:"Spaghetti / Detached",layerShift:"Layer shift",cloggedNozzle:"Clogged nozzle",filamentRunout:"Filament runout",warping:"Warping",stringing:"Stringing",underExtrusion:"Under-extrusion",powerFailure:"Power failure",userCancelled:"User cancelled",other:"Other"},statuses:{completed:"Completed",failed:"Failed",aborted:"Cancelled",printing:"Printing"}},kProfiles:{title:"K-Profiles",noPrintersConfigured:"No Printers Configured",addPrinterInSettings:"Add a printer in Settings to manage K-profiles",noActivePrinters:"No Active Printers",enablePrinterConnection:"Enable a printer connection to view its K-profiles",loadingProfiles:"Loading K-Profiles...",printerOffline:"Printer Offline",printerOfflineDesc:"The selected printer is not connected. Power it on to view K-profiles.",noMatchingProfiles:"No Matching Profiles",noMatchingProfilesDesc:"No profiles match your search criteria",noKProfiles:"No K-Profiles",noKProfilesDesc:"No pressure advance profiles found for {{diameter}}mm nozzle",createFirstProfile:"Create First Profile",printer:"Printer",nozzle:"Nozzle",refresh:"Refresh",addProfile:"Add Profile",export:"Export",import:"Import",select:"Select",selectAll:"Select All",delete:"Delete",searchPlaceholder:"Search by name or filament...",allExtruders:"All Extruders",leftOnly:"Left Only",rightOnly:"Right Only",allFlow:"All Flow",hfOnly:"HF Only",sOnly:"S Only",sortName:"Sort: Name",sortKValue:"Sort: K-Value",sortFilament:"Sort: Filament",leftExtruder:"Left Extruder",rightExtruder:"Right Extruder",modal:{addTitle:"Add K-Profile",editTitle:"Edit K-Profile",profileName:"Profile Name",profileNamePlaceholder:"My PLA Profile",kValue:"K-Value",kValuePlaceholder:"0.020",kValueHelp:"Typical range: 0.01 - 0.06 for PLA, 0.02 - 0.10 for PETG",filament:"Filament",selectFilament:"Select filament...",noFilamentsHelp:"No filaments found. Create a K-profile in Bambu Studio first.",flowType:"Flow Type",highFlow:"High Flow",standard:"Standard",nozzleSize:"Nozzle Size",extruder:"Extruder",extruders:"Extruders",left:"Left",right:"Right",notes:"Notes (stored locally)",notesPlaceholder:"Add notes about this profile...",notesHelp:"Notes are saved in Bambuddy, not on the printer",syncing:"Syncing with printer...",savingExtruder:"Saving to extruder {{current}}/{{total}}...",pleaseWait:"Please wait"},deleteConfirm:{title:"Delete Profile",cannotUndo:"This cannot be undone",message:'Are you sure you want to delete "{{name}}" from the printer?'},bulkDelete:{title:"Delete Profiles",cannotUndo:"This cannot be undone",message:"Are you sure you want to delete {{count}} selected profiles from the printer?"},toast:{profileSaved:"K-profile saved",profilesSaved:"K-profile saved to {{count}} extruders",selectAtLeastOneExtruder:"Please select at least one extruder",profileDeleted:"K-profile deleted",profilesDeleted:"Deleted {{count}} profiles",exportedProfiles:"Exported {{count}} profiles",importedProfiles:"Imported {{count}} of {{total}} profiles",noProfilesToExport:"No profiles to export",invalidFileFormat:"Invalid file format",failedToParseImport:"Failed to parse import file",failedToSaveBatch:"Failed to save K-profiles",noteSaved:"Note saved",failedToSaveNote:"Failed to save note"},permission:{noRead:"You do not have permission to refresh profiles",noCreate:"You do not have permission to add profiles",noUpdate:"You do not have permission to update K-profiles",noDelete:"You do not have permission to delete K-profiles",noExport:"You do not have permission to export profiles",noImport:"You do not have permission to import profiles"}},virtualPrinter:{title:"Virtual Printer",running:"Running",stopped:"Stopped",description:{default:"Enable a virtual printer that appears in Bambu Studio and OrcaSlicer. Files sent to this printer will be archived directly without printing.",proxy:"Enable a proxy that relays slicer traffic to a real printer, allowing remote printing over any network."},enable:{title:"Enable Virtual Printer",visibleInSlicer:'Visible as "Bambuddy" in slicer discovery',proxyingTo:"Proxying to {{name}}",notActive:"Not active"},model:{title:"Printer Model",description:"Select which printer model to emulate.",restartWarning:"Changing the model will restart the virtual printer"},accessCode:{title:"Access Code",isSet:"Access code is set",notSet:"No access code set - required to enable",placeholder:"Enter 8-char code",placeholderChange:"Enter new code to change",hint:"Must be exactly 8 characters. Used by slicers to authenticate.",charCount:"({{count}}/8)"},targetPrinter:{title:"Target Printer",configured:"Proxy target configured",notConfigured:"No target printer selected - required for proxy mode",placeholder:"Select a printer...",hint:"Select the printer to proxy slicer traffic to. The printer must be in LAN mode.",noPrinters:"No printers configured. Add a printer first to use proxy mode."},remoteInterface:{title:"Network Interface Override",configured:"Interface override active",optional:"Optional - use if auto-detected IP is wrong (e.g. multiple NICs, Docker, VPN)",placeholder:"Auto-detect (default)...",hint:"Override the IP address advertised via SSDP and used in the TLS certificate. Useful when Bambuddy has multiple network interfaces."},mode:{title:"Mode",archive:"Archive",archiveDesc:"Archive files immediately",review:"Review",reviewDesc:"Review before archiving",queue:"Queue",queueDesc:"Archive and add to queue",proxy:"Proxy",proxyDesc:"Relay to real printer"},autoDispatch:{title:"Auto-dispatch",description:"Automatically start prints when added to queue. When off, prints wait for manual dispatch."},tailscaleDisabled:{title:"Tailscale integration",description:"When enabled, uses Tailscale for trusted TLS certs. Disable to use self-signed cert only."},setupRequired:{title:"Setup Required",description:"The virtual printer feature requires additional system configuration before it will work. This includes port forwarding, firewall rules, and platform-specific settings.",readGuide:"Read the setup guide before enabling"},archiveNameSource:{title:"Archive name source",description:'Choose how new archives are named when files arrive via the virtual printer. "Metadata" uses the slicer-embedded title from the 3MF (default). "Filename" uses the filename Bambu Studio sent over FTP — handy if you renamed the job in the "send to printer" dialog.',metadata:"Metadata",filename:"Filename"},howItWorks:{title:"How it works",step1:"On the same LAN, virtual printers appear in your slicer (Bambu Studio / OrcaSlicer) automatically via discovery. From other networks, add them manually by IP address and access code.",step2:'In Archive, Review, and Queue modes, use the "Send" button in your slicer to upload 3MF files to Bambuddy. The slicer will show "Print success" — the file is stored, not printed.',step3:"In Proxy mode, the virtual printer relays all traffic to a real printer — prints start immediately as if connected directly."},status:{title:"Status Details",printerName:"Printer Name",model:"Model",serialNumber:"Serial Number",mode:"Mode",pendingFiles:"Pending Files",targetPrinter:"Target Printer",ftpPort:"FTP Port",mqttPort:"MQTT Port",ftpConnections:"FTP Connections",mqttConnections:"MQTT Connections"},toast:{updated:"Virtual printer settings updated",failedToUpdate:"Failed to update settings",tailscaleNotAvailable:"Tailscale is not installed on this host. Install Tailscale first, then try again.",copyFailed:"Failed to copy — try selecting the text manually",accessCodeRequired:"Please set an access code first",targetPrinterRequired:"Please select a target printer first",bindIpRequired:"Please set a bind IP first",accessCodeEmpty:"Access code cannot be empty",accessCodeLength:"Access code must be exactly 8 characters",created:"Virtual printer created",failedToCreate:"Failed to create virtual printer",deleted:"Virtual printer deleted",failedToDelete:"Failed to delete virtual printer"},list:{title:"Virtual Printers",add:"Add",addFirst:"Add Virtual Printer",empty:"No virtual printers configured. Add one to get started."},bindIp:{title:"Bind Interface",placeholder:"Select interface...",hint:"Network interface for this virtual printer to bind to. Must be unique per printer."},proxy:{accessCodeHint:"In proxy mode, use your target printer's access code in the slicer. The connection is forwarded transparently to the real printer."},addDialog:{title:"Add Virtual Printer",name:"Name",hint:"You can configure access code, target printer, and other settings after creating.",create:"Create"},deleteConfirm:{title:"Delete Virtual Printer",message:'Are you sure you want to delete "{{name}}"? This will stop all services for this printer.'}},modelViewer:{openInSlicer:"Open in Slicer",tabs:{model:"3D Model",gcode:"G-code Preview"},notAvailable:"not available",notSliced:"not sliced",plates:"Plates",allPlates:"All Plates",plateNumber:"Plate {{number}}",plateCount:"{{count}} plate",plateCount_other:"{{count}} plates",objectCount:"{{count}} object",objectCount_other:"{{count}} objects",filamentCount:"{{count}} filament",filamentCount_other:"{{count}} filaments",eta:"ETA {{minutes}} min",noPreview:"No preview available for this file",pagination:{pageOf:"Page {{current}} of {{total}}",prev:"Prev",next:"Next"},errors:{failedToLoad:"Failed to load file",noMeshes:"No meshes found in 3MF file",unsupportedFormat:"Unsupported file format"}},maintenanceDescriptions:{lubricateCarbonRods:"Apply lubricant to carbon rods for smooth motion",lubricateRails:"Apply lubricant to linear rails for smooth motion",cleanNozzle:"Clean hotend and nozzle to prevent clogs",checkBelts:"Verify belt tension for accurate prints",cleanBuildPlate:"Clean build plate for better adhesion",checkExtruder:"Inspect extruder gears for wear",checkCooling:"Ensure cooling fans are working properly",generalInspection:"General printer inspection",cleanCarbonRods:"Clean carbon rods to reduce friction",lubricateSteelRods:"Apply lubricant to steel rods for smooth motion",cleanSteelRods:"Clean steel rods to reduce friction",cleanLinearRails:"Wipe linear rails to remove dust and debris",checkPtfeTube:"Inspect PTFE tube for wear or damage",replaceHepaFilter:"Replace HEPA filter for air quality",replaceCarbonFilter:"Replace activated carbon filter",lubricateLeftNozzleRail:"Lubricate left nozzle rail (H2 series)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Open plug admin page",deleteSmartPlug:"Delete Smart Plug",turnOnSmartPlug:"Turn On Smart Plug",turnOffSmartPlug:"Turn Off Smart Plug",turnOn:"Turn On",turnOff:"Turn Off",addSmartPlug:{scanningNetwork:"Scanning network...",chooseEntity:"Choose an entity...",connectionFailed:"Connection failed",searchEntities:"Search entities...",searchPowerSensors:"Search power sensors...",searchEnergySensors:"Search energy sensors...",placeholders:{plugName:"Living Room Plug",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Same as power topic, or different"}},linkedTo:"Linked to:",monitorOnly:"Monitor Only",alerts:"Alerts",scheduleOn:"On {{time}}",scheduleOff:"Off {{time}}",on:"On",off:"Off",power:"Power",kwhToday:"kWh Today",settings:"Settings",automationSettings:"Automation Settings",showInSwitchbar:"Show in Switchbar",quickAccessSidebar:"Quick access from sidebar",enabled:"Enabled",enableAutomation:"Enable automation for this plug",autoOn:"Auto On",autoOnDescription:"Turn on when print starts",autoOff:"Auto Off",autoOffDescription:"Turn off when print completes (one-shot)",autoOffPersistent:"Keep Enabled",autoOffPersistentDescription:"Stay enabled between prints instead of one-shot",turnOffDelayMode:"Turn Off Delay Mode",time:"Time",temp:"Temp",delayMinutes:"Delay (minutes)",tempThreshold:"Temperature threshold (°C)",tempThresholdDescription:"Turns off when nozzle cools below this temperature",edit:"Edit",deleteConfirm:'Are you sure you want to delete "{{name}}"? This cannot be undone.',turnOnConfirm:'Are you sure you want to turn on "{{name}}"?',turnOffConfirm:'Are you sure you want to turn off "{{name}}"? This will cut power to the connected device.',failedToTurn:'Failed to turn {{action}} "{{name}}"',unknown:"Unknown",addTitle:"Add Smart Plug",editTitle:"Edit Smart Plug",stopScanning:"Stop Scanning",discoverTasmota:"Discover Tasmota Devices",foundDevices:"Found {{count}} device(s) - click to select:",noDevicesFound:"No Tasmota devices found on your network",haNotConfigured:"Home Assistant is not configured. Set it up in",haSettingsPath:"Settings → Network → Home Assistant",selectEntity:"Select Entity *",ipAddress:"IP Address *",nameLabel:"Name *",username:"Username",password:"Password",authHint:"Leave empty if your Tasmota device doesn't require authentication",linkToPrinter:"Link to Printer",noPrinter:"No printer (manual control only)",linkingDescription:"Linking enables automatic on/off when prints start/complete",powerAlerts:"Power Alerts",alertAbove:"Alert if above (W)",alertBelow:"Alert if below (W)",alertDescription:"Get notified when power consumption crosses these thresholds. Leave empty to disable that direction.",dailySchedule:"Daily Schedule",turnOnAt:"Turn On at",turnOffAt:"Turn Off at",scheduleDescription:"Automatically turn the plug on/off at these times daily. Leave empty to skip that action.",showOnPrinterCard:"Show on Printer Card",displayOnPrinterCard:"Display button on printer card",connectedResult:"Connected!",deviceLabel:"Device: {{name}} - ",stateLabel:"State: {{state}}",test:"Test",delete:"Delete",save:"Save",add:"Add",cancel:"Cancel",failedToStartScan:"Failed to start scan",nameRequired:"Name is required",entityRequired:"Entity is required for Home Assistant plugs",mqttTopicRequired:"At least one MQTT topic must be configured for power, energy, or state monitoring",loadingEntities:"Loading entities...",loading:"Loading...",failedToLoadEntities:"Failed to load entities: {{error}}",noEntitiesMatching:'No entities found matching "{{search}}"',noEntitiesAvailable:"No entities available",searchingEntities:"Searching all entities ({{count}} found)",showingEntities:"Showing switch, light, input_boolean ({{count}} available)",energyMonitoringOptional:"Energy Monitoring (Optional)",energyMonitoringHint:"Search and select sensors that provide power/energy data.",powerSensorW:"Power Sensor (W)",energyTodayKwh:"Energy Today (kWh)",totalEnergyKwh:"Total Energy (kWh)",noMatchingSensors:"No matching sensors",none:"None",mqttNotConfigured:"MQTT broker not configured. Set broker address in",mqttSettingsPath:"Settings → Network → MQTT Publishing",mqttNotConfiguredSuffix:"(you don't need to enable publishing, just fill in the broker details).",mqttMonitorOnlyDescription:"MQTT plugs receive power/energy data via MQTT subscription. On/off control is not available - use your MQTT broker or home automation system.",powerMonitoring:"Power Monitoring",energyMonitoring:"Energy Monitoring",stateMonitoring:"State Monitoring",optional:"optional",topic:"Topic",jsonPath:"JSON Path",multiplier:"Multiplier",onValue:"ON Value",mqttPowerHint:`JSON path extracts value from JSON payload (e.g., "power_l1"). Leave empty if topic publishes raw numeric values.
 Use multiplier 0.001 for mW→W, 1000 for kW→W.`,mqttEnergyHint:`JSON path extracts value from JSON payload. Leave empty for raw values.
 Use multiplier 0.001 for Wh→kWh, 1000 for MWh→kWh.`,mqttStateHint:`JSON path extracts value from JSON payload. Leave empty for raw values.
-ON value: the exact string that means "ON". Leave empty for auto-detect (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"Power URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"Power Multiplier",restEnergyUrl:"Energy URL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Energy Multiplier",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"Separate URL for power data (uses Status URL if empty)",restEnergyUrlHint:"Separate URL for energy data (uses Status URL if empty)",restEnergyHint:"Each value can use its own URL or fall back to the Status URL. Use multipliers for unit conversion (e.g. 0.001 to convert Wh to kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"No switches in switchbar",enableSwitchbarHint:'Enable "Show in Switchbar" in Settings > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"Email",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP email notifications",telegram:"Notifications via Telegram bot",discord:"Send to Discord channel via webhook",ntfy:"Free, self-hostable push notifications",pushover:"Simple, reliable push notifications",callmebot:"Free WhatsApp notifications via CallMeBot",webhook:"Generic HTTP POST to any URL",homeassistant:"Persistent notifications in Home Assistant dashboard"},lastSuccess:"Last: {{date}}",error:"Error",printer:"Printer:",allPrinters:"All printers",sendTestNotification:"Send Test Notification",eventSettings:"Event Settings",enabled:"Enabled",sendFromProvider:"Send notifications from this provider",printEvents:"Print Events",printerStatus:"Printer Status",amsAlarms:"AMS Alarms",amsHtAlarms:"AMS-HT Alarms",printQueue:"Print Queue",start:"Start",plateCheck:"Plate Check",complete:"Complete",failed:"Failed",stopped:"Stopped",progress:"Progress",offline:"Offline",lowFilament:"Low Filament",maintenance:"Maintenance",amsHumidity:"AMS Humidity",amsTemp:"AMS Temp",amsHtHumidity:"AMS-HT Humidity",amsHtTemp:"AMS-HT Temp",bedCooled:"Bed Cooled",firstLayer:"First Layer",quiet:"Quiet",digest:"Digest {{time}}",printStarted:"Print Started",plateNotEmpty:"Plate Not Empty",plateNotEmptyDescription:"Objects detected before print",printCompleted:"Print Completed",bedCooledLabel:"Bed Cooled",bedCooledDescription:"Bed cooled below threshold after print",firstLayerCompleteLabel:"First Layer Complete",firstLayerCompleteDescription:"Notify with snapshot when first layer finishes",missingSpoolAssignmentLabel:"Missing Spool Assignment",missingSpoolAssignmentDescription:"Notify when print starts and required trays have no assigned spool",printFailed:"Print Failed",printStopped:"Print Stopped",progressMilestones:"Progress Milestones",progressMilestonesDescription:"Notify at 25%, 50%, 75%",printerOffline:"Printer Offline",printerError:"Printer Error",lowFilamentLabel:"Low Filament",maintenanceDue:"Maintenance Due",maintenanceDueDescription:"Notify when maintenance is needed",amsHumidityHigh:"AMS Humidity High",amsHumidityHighDescription:"Regular AMS humidity exceeds threshold",amsTemperatureHigh:"AMS Temperature High",amsTemperatureHighDescription:"Regular AMS temperature exceeds threshold",amsHtHumidityHigh:"AMS-HT Humidity High",amsHtHumidityHighDescription:"AMS-HT humidity exceeds threshold",amsHtTemperatureHigh:"AMS-HT Temperature High",amsHtTemperatureHighDescription:"AMS-HT temperature exceeds threshold",jobAdded:"Job Added",jobAddedDescription:"Job added to queue",jobAssigned:"Job Assigned",jobAssignedDescription:"Model-based job assigned to printer",jobStarted:"Job Started",jobStartedDescription:"Queue job started printing",jobWaiting:"Job Waiting",jobWaitingDescription:"Job waiting for filament or printer",jobSkipped:"Job Skipped",jobSkippedDescription:"Job skipped (previous failed)",jobFailed:"Job Failed",jobFailedDescription:"Job failed to start",queueComplete:"Queue Complete",queueCompleteDescription:"All queue jobs finished",quietHours:"Quiet Hours",noNotificationsDuring:"No notifications during these hours",editProviderToChangeQuietHours:"Edit provider to change quiet hours",dailyDigest:"Daily Digest",batchNotifications:"Batch notifications into a single daily summary",sendAt:"Send at {{time}}",editProviderToChangeDigestTime:"Edit provider to change digest time",edit:"Edit",deleteProvider:"Delete Notification Provider",deleteConfirm:'Are you sure you want to delete "{{name}}"? This cannot be undone.',delete:"Delete",addTitle:"Add Notification Provider",editTitle:"Edit Notification Provider",nameLabel:"Name *",namePlaceholder:"My Notifications",providerTypeLabel:"Provider Type *",configuration:"Configuration",testConfiguration:"Test Configuration",printerFilter:"Printer Filter",onlyFromPrinter:"Only send notifications for events from this printer",quietHoursDnd:"Quiet Hours (Do Not Disturb)",quietStart:"Start",quietEnd:"End",dailyDigestLabel:"Daily Digest",sendDigestAt:"Send digest at",digestCollected:"Events will be collected and sent as a single summary at this time",notificationEvents:"Notification Events",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(after print completes)",eventPriority:{sectionTitle:"ntfy Priority",helpNtfy:"Pick a priority for each enabled event. ntfy uses these to escalate alerts (sound, visibility, push behavior). Levels not set here use the ntfy server default.",min:"Min",low:"Low",default:"Default",high:"High",urgent:"Urgent"},cancel:"Cancel",save:"Save",add:"Add",nameRequired:"Name is required",fieldRequired:"{{field}} is required",phoneNumber:"Phone Number",apiKey:"API Key",serverUrl:"Server URL",topic:"Topic",authToken:"Auth Token",userKey:"User Key",appToken:"App Token",priority:"Priority",botToken:"Bot Token",chatId:"Chat ID",smtpServer:"SMTP Server",smtpPort:"SMTP Port",security:"Security",authentication:"Authentication",username:"Username",password:"Password",fromEmail:"From Email",toEmail:"To Email",webhookUrl:"Webhook URL",payloadFormat:"Payload Format",authorization:"Authorization",titleFieldName:"Title Field Name",messageFieldName:"Message Field Name",editTemplate:"Edit Template: {{name}}",titleLabel:"Title",bodyLabel:"Body",titlePlaceholder:"Notification title...",bodyPlaceholder:"Notification body...",availableVariables:"Available Variables",clickToInsert:"Click to insert at cursor position in body",livePreview:"Live Preview",hide:"Hide",show:"Show",loadingPreview:"Loading preview...",enterTemplateContent:"Enter template content to see preview",titlePreview:"Title:",bodyPreview:"Body:",resetToDefault:"Reset to Default",titleRequired:"Title is required",bodyRequired:"Body is required",notificationLog:"Notification Log",showFailedOnly:"Failed only",last24Hours:"Last 24 hours",last7Days:"Last 7 days",last30Days:"Last 30 days",last90Days:"Last 90 days",justNow:"Just now",noFailedNotifications:"No failed notifications",noNotificationsLogged:"No notifications logged",unknownProvider:"Unknown Provider",logTitle:"Title",logMessage:"Message",logError:"Error",logProvider:"Provider: {{type}}",logTime:"Time: {{time}}",refresh:"Refresh",clearOld:"Clear Old",statsSummary:"Last {{days}} days:",statsNotifications:"notifications",statsSent:"{{count}} sent",statsFailed:"{{count}} failed",eventTypes:{print_start:"Print Started",print_complete:"Print Complete",print_failed:"Print Failed",print_stopped:"Print Stopped",print_progress:"Progress",printer_offline:"Printer Offline",printer_error:"Printer Error",filament_low:"Low Filament",maintenance_due:"Maintenance Due",test:"Test"},userEmail:{title:"Notifications",emailNotifications:"Email Notifications",emailNotificationsDesc:"Receive email notifications for your own print jobs. Emails are sent using the system SMTP settings configured in Advanced Authentication.",sendingTo:"Notifications will be sent to",noEmailWarning:"Your account does not have an email address. Contact an administrator to add one.",printJobNotifications:"Print Job Notifications",printJobNotificationsDesc:"Choose which events trigger email notifications for print jobs you submit.",printJobStarts:"Print Job Starts",printJobStartsDesc:"Get notified when your print job begins.",printJobFinishes:"Print Job Finishes",printJobFinishesDesc:"Get notified when your print job completes successfully.",printErrors:"Print Errors",printErrorsDesc:"Get notified when your print job fails or encounters an error.",printJobStops:"Print Job Stops",printJobStopsDesc:"Get notified when your print job is cancelled or stopped.",saveSuccess:"Notification preferences saved.",saveError:"Failed to save notification preferences."}},richTextEditor:{bold:"Bold",italic:"Italic",underline:"Underline",bulletList:"Bullet List",numberedList:"Numbered List",alignLeft:"Align Left",alignCenter:"Align Center",alignRight:"Align Right",addLink:"Add Link",removeLink:"Remove Link"},externalLinks:{noLinksConfigured:"No external links configured",deleteLink:"Delete Link",removeCustomIcon:"Remove custom icon",openInNewTab:"Open in new tab",placeholders:{linkName:"My Link"}},keyboardShortcuts:{title:"Keyboard Shortcuts",navigation:"Navigation",archivesSection:"Archives",kProfilesSection:"K-Profiles",generalSection:"General",shortcuts:{goToPrinters:"Go to Printers",goToArchives:"Go to Archives",goToQueue:"Go to Queue",goToStats:"Go to Statistics",goToProfiles:"Go to Cloud Profiles",goToSettings:"Go to Settings",focusSearch:"Focus search",openUploadModal:"Open upload modal",clearSelection:"Clear selection / blur input",contextMenu:"Context menu on cards",refreshProfiles:"Refresh profiles",newProfile:"New profile",exitSelectionMode:"Exit selection mode",showHelp:"Show this help"},footer:"Press Esc or click outside to close"},notificationLog:{title:"Notification Log",events:{printStarted:"Print Started",printComplete:"Print Complete",printFailed:"Print Failed",printStopped:"Print Stopped",progress:"Progress",printerOffline:"Printer Offline",printerError:"Printer Error",lowFilament:"Low Filament",maintenanceDue:"Maintenance Due",test:"Test"},timeAgo:{justNow:"Just now",minutesAgo:"{{minutes}}m ago",hoursAgo:"{{hours}}h ago"}},restoreBackup:{title:"Restore Backup",restoring:"Restoring...",restoreComplete:"Restore Complete",restoreFailed:"Restore Failed",importSettings:"Import settings from a backup file",pleaseWait:"Please wait while your data is being restored",clickToSelect:"Click to select backup file (.json or .zip)",howDuplicateHandling:"How duplicate handling works:",categories:{printers:"Printers",smartPlugs:"Smart Plugs",notificationProviders:"Notification Providers",filaments:"Filaments",archives:"Archives",pendingUploads:"Pending Uploads",settingsTemplates:"Settings & Templates"},matchingInfo:{printers:"matched by serial number",smartPlugs:"matched by IP address",notificationProviders:"matched by name",filaments:"matched by name + type + brand",archives:"matched by content hash",pendingUploads:"matched by filename",settingsTemplates:"always overwritten"},replaceExisting:"Replace existing data",keepExisting:"Keep existing data",replaceDescription:"Overwrite items that already exist with backup data",keepDescription:"Only restore items that don't already exist",caution:"Caution:",cautionText:"Overwriting will replace your current configurations with backup data. Printer access codes are never overwritten for security.",itemsRestored:"Items Restored",itemsSkipped:"Items Skipped",restored:"Restored",skipped:"Skipped (already exist)",filesLabel:"Files (3MF, thumbnails, etc.)",newApiKeysGenerated:"New API Keys Generated",newApiKeysWarning:"These keys are only shown once. Copy them now!",processingBackup:"Processing backup file...",noDataFound:"No data was found to restore in the backup file.",failedToRestore:"Failed to restore backup. Please check the file format."},backupExport:{title:"Export Backup",selectData:"Select data to include",selectAll:"Select All",selectNone:"Select None",categoryDescriptions:{settings:"Language, theme, update preferences",notifications:"ntfy, Pushover, Discord, etc.",templates:"Custom message templates",smartPlugs:"Tasmota plug configurations",externalLinks:"Sidebar links to external services",printers:"Printer info (access codes excluded)",plateDetection:"Empty plate reference images",filaments:"Filament types and costs",maintenance:"Custom maintenance schedules",archives:"All print data + files (3MF, thumbnails, photos)",projects:"Projects, BOM items, and attachments",pendingUploads:"Virtual printer uploads awaiting review",apiKeys:"Webhook API keys (new keys generated on import)"},requiresPrinters:"Requires Printers to be selected",zipFileWarning:"ZIP file will be created.",zipFileDescription:"Includes all 3MF files, thumbnails, timelapses, and photos. This may take a while and result in a large file.",includeAccessCodes:"Include Access Codes",includeAccessCodesDescription:"For transferring to another machine",includeAccessCodesWarning:"Access codes will be included in plain text. Keep this backup file secure!",categoriesSelected:"{{selectedCount}} categories selected"},pendingUploads:{placeholders:{notes:"Add notes about this print..."},discardUpload:"Discard Upload",archiveAllUploads:"Archive All Uploads",discardAllUploads:"Discard All Uploads",archive:"Archive",timeAgo:{justNow:"Just now",minutesAgo:"{{minutes}}m ago",hoursAgo:"{{hours}}h ago",daysAgo:"{{days}}d ago"}},apiBrowser:{placeholders:{requestBody:"JSON request body...",searchEndpoints:"Search endpoints..."}},configureAmsSlot:{title:"Configure AMS Slot",slotConfigured:"Slot Configured!",configuringSlot:"Configuring slot:",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Search presets...",colorPlaceholder:"Color name or hex (e.g., brown, FF8800)",clearCustomColor:"Clear custom color",noCloudPresets:"No cloud presets. Login to Bambu Cloud to sync.",noPresetsAvailable:"No presets available. Login to Bambu Cloud or import local profiles.",noMatchingPresets:"No matching presets found.",custom:"Custom",builtin:"Built-in",settingsSentToPrinter:"Settings sent to printer",filamentProfile:"Filament Profile",kProfileLabel:"K Profile (Pressure Advance)",filteringFor:"Filtering for: {{material}}",noKProfile:"No K profile (use default 0.020)",noMatchingKProfiles:"No matching K profiles found. Default K=0.020 will be used.",selectFilamentFirst:"Select a filament profile first",kFromCalibration:"K={{value}} from printer calibration",customColorLabel:"Custom Color (optional)",presetColors:"{{name}} colors:",showLessColors:"Show less colors",showMoreColors:"Show more colors",clear:"Clear",hexLabel:"Hex: #{{hex}}",resetting:"Resetting...",resetSlot:"Reset Slot",cancel:"Cancel",configuring:"Configuring...",configureSlot:"Configure Slot"},githubBackup:{title:"GitHub Backup",history:"History",downloadBackup:"Download Backup",restoreBackup:"Restore Backup",noBackupsYet:"No backups yet"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Search tags...",renameTag:"Rename tag",deleteTag:"Delete tag"},notificationTemplates:{placeholders:{title:"Notification title...",body:"Notification body..."}},batchTag:{placeholders:{newTag:"Enter new tag..."}},photoGallery:{deletePhoto:"Delete Photo"},filamentHoverCard:{copySpoolUuid:"Copy spool UUID"},kProfilesView:{hasNote:"Has note",copyProfile:"Copy profile"},layout:{openMenu:"Open menu",noPermissionSystemInfo:"You do not have permission to view system information"},dashboard:{dragToReorder:"Drag to reorder",hideWidget:"Hide widget"},notificationProviderCard:{deleteNotificationProvider:"Delete Notification Provider"},fileManagerModal:{closeFileManager:"Close file manager",sortFiles:"Sort files",goToParentFolder:"Go to parent folder",threeView:"3D View"},embeddedCameraViewer:{refreshStream:"Refresh stream",close:"Close",zoomOut:"Zoom out",resetZoom:"Reset zoom",zoomIn:"Zoom in",dragToResize:"Drag to resize"},timelapseViewer:{skipBack5s:"Skip back 5s",skipForward5s:"Skip forward 5s"},notificationProviders:{descriptions:{email:"SMTP email notifications",telegram:"Notifications via Telegram bot",discord:"Send to Discord channel via webhook",ntfy:"Free, self-hostable push notifications",pushover:"Simple, reliable push notifications",callmebot:"Free WhatsApp notifications via CallMeBot",webhook:"Generic HTTP POST to any URL"}},logViewer:{searchPlaceholder:"Search message or logger name...",noLogEntries:"No log entries found"},switchbarPopover:{noSwitchesInSwitchbar:"No switches in switchbar"},projectPageModal:{placeholders:{title:"Title",designer:"Designer",license:"License",description:"Enter description...",profileTitle:"Profile Title",profileDescription:"Profile description..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Waiting",justNow:"Just now",now:"Now",minsAgo:"{{count}}m ago",inMins:"in {{count}}m",hoursAgo:"{{count}}h ago",inHours:"in {{count}}h",daysAgo:"{{count}}d ago",inDays:"in {{count}}d"},spoolbuddy:{nav:{dashboard:"Dashboard",ams:"AMS",inventory:"Inventory",writeTag:"Write",settings:"Settings"},status:{nfcReady:"NFC Ready",nfcOff:"NFC Off",offline:"Offline",online:"Online",noPrinters:"No printers",deviceOffline:"Device Offline",waitingConnection:"Waiting for device connection...",systemReady:"System Ready",status:"Status"},dashboard:{readyToScan:"Ready to scan",idleMessage:"Place a spool on the scale to identify it",nfcHint:"NFC tag will be read automatically",device:"Device",syncWeight:"Sync Weight",weightSynced:"Synced!",unknownTag:"Unknown Tag",newTag:"New Tag Detected",onScale:"on scale",linkSpool:"Link to Spool",linkTagTitle:"Link Tag to Spool",linkTag:"Link Tag",selectSpool:"Select a spool to link this tag to:",noUntagged:"No spools without tags found",tagDetected:"Tag detected",noTag:"No tag",tagId:"Tag",grossWeight:"Gross weight",spoolSize:"Spool size",close:"Close",currentSpool:"Current Spool",plateReady:"Plate ready: {{name}}",plateReadyLabel:"Plates ready to clear",plateClearAction:"Clear",plateClearedToast:"Plate marked as cleared",plateClearFailed:"Could not mark plate as cleared"},modal:{spoolDetected:"Spool Detected",assignToAms:"Assign to AMS",syncWeight:"Sync Weight",weightSynced:"Synced!",syncing:"Syncing...",newTagDetected:"New Tag Detected",addToInventory:"Add to Inventory",assignToAmsTitle:"Assign to AMS",selectSlot:"Select a slot",assign:"Assign",assigning:"Assigning...",assignSuccess:"Assigned!",assignError:"Failed to assign spool. Please try again.",noPrinterSelected:"Select a printer...",noAmsDetected:"No AMS detected on this printer",slot:"Slot"},weight:{noReading:"No reading",stable:"Stable",measuring:"Measuring...",tare:"Tare",calibrate:"Calibrate"},spool:{remaining:"Remaining",material:"Material",brand:"Brand",color:"Color",coreWeight:"Core",labelWeight:"Label",scaleWeight:"Scale",netWeight:"Net",lastUsed:"Last used"},ams:{noData:"No AMS detected",connectAms:"Connect an AMS to see filament slots",noPrinter:"No printer selected",selectPrinter:"Select a printer from the top bar",printerDisconnected:"Printer disconnected",humidity:"Humidity",level:"Level",active:"Active",slot:"Slot",empty:"Empty"},inventory:{search:"Search spools...",empty:"No spools in inventory",noResults:"No matching spools",spools:"spools",addSpool:"Add Spool"},settings:{tabDevice:"Device",tabDisplay:"Display",tabScale:"Scale",tabUpdates:"Updates",nfcReader:"NFC Reader",type:"Type",connection:"Connection",notConnected:"N/A",deviceInfo:"Device Info",hostname:"Host",uptime:"Uptime",systemConfig:"Backend & Auth",backendUrl:"Bambuddy Backend URL",apiToken:"API Token",apiTokenPlaceholder:"Enter API token",saveConfig:"Save Config",systemQueued:"Config queued.",nfcDiagnostic:"NFC Diagnostic",scaleDiagnostic:"Scale Diagnostic",readTagDiagnostic:"Read Tag Diagnostic",testNfc:"Test reader",testScale:"Test accuracy",testReadTag:"Read tag",systemFieldsRequired:"Backend URL is required.",brightness:"Brightness",saved:"Saved",noBacklight:"No DSI backlight detected. Brightness control requires a DSI display.",screenBlank:"Screen Blank Timeout",screenBlankDesc:"Screen turns off after inactivity. Touch to wake.",displayNote:"Brightness is applied as a software filter.",scaleCalibration:"Scale Calibration",currentWeight:"Current weight",tareOffset:"Tare",calFactor:"Factor",knownWeight:"Known weight",calStep1:"Remove all items from the scale and press Set Zero.",calStep2:"Place known weight on scale.",setZero:"Set Zero",calibrateNow:"Calibrate",calibrated:"Calibrated",tareSet:"Tare command sent. Waiting for device...",tareFailed:"Failed to send tare command",zeroSet:"Zero point set. Place known weight on scale.",calibrationDone:"Calibration complete!",calibrationFailed:"Calibration failed",lastCalibrated:"Last calibrated",stable:"Stable",settling:"Settling...",firmware:"Firmware",scale:"Scale",noDevice:"No SpoolBuddy device found",daemonVersion:"Daemon Version",currentVersion:"Current",versionPending:"Waiting for daemon...",checking:"Checking...",checkUpdates:"Check for Updates",updateAvailable:"Update available",updateInstructions:"Update via SSH: run the SpoolBuddy install script to upgrade.",upToDate:"Up to date",includeBeta:"Include beta versions"},writeTag:{tabExisting:"Existing Spool",tabNew:"New Spool",tabReplace:"Replace Tag",searchPlaceholder:"Search by material, color, brand...",noUntaggedSpools:"No spools without tags",noTaggedSpools:"No spools with tags",selectSpool:"Select a spool, then place a blank NTAG on the reader",placeTag:"Place an NTAG on the reader",tagReady:"Tag detected — ready to write",writeTag:"Write Tag",replaceTag:"Replace Tag",writing:"Writing tag...",waiting:"Waiting for SpoolBuddy...",writeSuccess:"Tag written successfully!",writeFailed:"Write failed",queueFailed:"Failed to queue write command",tryAgain:"Try Again",cancel:"Cancel",replaceWarning:"Old tag will be unlinked. New tag will replace it.",deviceOffline:"SpoolBuddy is offline",material:"Material",colorName:"Color Name",color:"Color",brand:"Brand",weight:"Weight (g)",createSpool:"Create Spool",creating:"Creating...",spoolCreated:"Spool created! Ready to write.",createFailed:"Failed to create spool"},quickMenu:{printerPower:"Printer Power",systemControls:"System",restartDaemon:"Restart Daemon",restartBrowser:"Restart Browser",reboot:"Reboot",shutdown:"Shutdown",swipeToClose:"Swipe down to close",confirmTitle:"Confirm",confirmShutdown:"Are you sure you want to shut down the SpoolBuddy? You will need physical access to turn it back on.",confirmReboot:"Are you sure you want to reboot the SpoolBuddy?",confirmRestartDaemon:"Restart the SpoolBuddy daemon? NFC and scale will be temporarily unavailable.",confirmRestartBrowser:"Restart the kiosk browser? The display will briefly go blank.",confirm:"Confirm",confirmPlugOn:"Turn on {{name}}?",confirmPlugOff:"Turn off {{name}}?",turnOn:"Turn On",turnOff:"Turn Off"}},bugReport:{title:"Report a Bug",description:"Description",descriptionPlaceholder:"What went wrong? Please describe the issue...",email:"Email (optional)",emailPlaceholder:"your@email.com",emailPrivacy:"If provided, your email will be included in a collapsed section of the GitHub issue so the maintainer can follow up.",screenshot:"Screenshot",uploadOrPaste:"Upload, paste, or drag an image",dataCollectedSummary:"What data is included in the report?",dataIncluded:"Included:",dataIncludedList:"App version, OS, architecture, Python version, database stats (counts only), printer models, nozzle counts, firmware versions, connectivity status, integration status (Spoolman, MQTT, HA), non-sensitive settings, network interface count, Docker details, dependency versions.",dataNeverIncluded:"Never included:",dataNeverIncludedList:"Printer names, serial numbers, access codes, passwords, IP addresses, email addresses, API keys, tokens, webhook URLs, hostnames, or usernames.",submit:"Submit",startLogging:"Start Debug Logging",stepEnableLogging:"Debug logging enabled",stepReproduce:"Reproduce the issue now",stepStopLogging:"Stop & submit report",stopAndSubmit:"Stop & Submit",maxDuration:"Auto-stops after {{minutes}} min",stoppingLogs:"Collecting logs & submitting...",submitting:"Submitting bug report...",submitSuccess:"Bug report submitted successfully!",submitFailed:"Failed to submit bug report",thankYou:"Thank you!",submitted:"Your bug report has been submitted.",viewIssue:"View Issue",unexpectedError:"An unexpected error occurred"},failureDetection:{title:"AI Failure Detection",description:"Monitor prints with a self-hosted Obico ML API and act on detected failures automatically.",mlUrl:"Obico ML API URL",mlUrlHint:"Base URL of your self-hosted Obico ml_api container (e.g. http://192.168.1.10:3333).",test:"Test",testSuccess:"ML API reachable and healthy.",testFailed:"Could not reach the ML API.",sensitivity:"Sensitivity",sensitivityLow:"Low (fewer false positives)",sensitivityMedium:"Medium (balanced)",sensitivityHigh:"High (detect early, more false positives)",sensitivityHint:"Adjusts the confidence thresholds that trigger warnings and failures.",action:"Action on detected failure",actionNotify:"Notify only",actionPause:"Pause print",actionPauseOff:"Pause and cut power",pollInterval:"Poll interval (seconds)",pollIntervalHint:"How often to check each printer while it is printing. Minimum 5s, maximum 120s.",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"Monitored Printers",perPrinterHint:"Choose which printers the detection service watches.",monitorAll:"Monitor all connected printers",statusTitle:"Status",serviceRunning:"Service running",thresholds:"Low / High thresholds",activePrinters:"Active prints",noActivePrints:"No prints currently running.",historyTitle:"Recent Detections",noHistory:"No detections yet."},makerworld:{title:"MakerWorld",description:"Paste a MakerWorld model URL to import and print it directly from Bambuddy — without leaving for the Bambu Handy app.",pasteUrlHeader:"Import from MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… or paste any MakerWorld link",resolveButton:"Resolve",signInRequiredTitle:"Bambu Cloud sign-in required to download",signInRequiredBody:"You can browse model details anonymously, but MakerWorld requires a Bambu Cloud account to download 3MF files.",openCloudSettings:"Open Cloud settings",untitledModel:"Untitled model",byCreator:"by {{name}}",downloadsCount:"{{count}} downloads",licensePrefix:"License",alreadyImported:"Already in library",openOnMakerworld:"Open on MakerWorld",alreadyInLibrary:"This model is already in your library — find it in File Manager → MakerWorld",importSuccess:"Imported {{filename}} — saved to File Manager → MakerWorld",platesHeader:"Plates ({{count}})",plateDefaultName:"Plate {{n}}",materialCount:"{{count}} filaments",amsRequired:"AMS required",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"Save",sliceIn:"Save & Slice in {{slicer}}",disclaimer:"MakerWorld integration uses community-documented API endpoints. Bambuddy is not affiliated with or endorsed by MakerWorld or Bambu Lab.",lastImportSuccess:"Imported to your library",lastImportAlreadyInLibrary:"Already in your library",viewInLibrary:"View in File Manager",openInBambuStudio:"Open in Bambu Studio",openInOrcaSlicer:"Open in OrcaSlicer",importTo:"Import to file manager",recentImportsHeader:"Recent imports",phaseResolving:"Resolving",phaseDownloading:"Downloading",folderAuto:"MakerWorld (default)",importAll:"Import all",importAllProgress:"Importing {{current}}/{{total}}",openGallery:"Open image gallery",galleryPrev:"Previous image",galleryNext:"Next image",deleteImport:"Remove from library",importDeleting:"Removing…",importDeleted:"Removed from library",confirmDelete:"Remove {{filename}} from the library? This deletes the local file but the plate can be re-imported from MakerWorld.",errors:{resolveFailed:"Could not resolve that MakerWorld URL.",downloadFailed:"Download failed. Please try again.",deleteFailed:"Could not remove the file from the library."}},libraryTrash:{title:"Trash",headerButton:"Trash",headerTooltip:"View files moved to the trash",backToFiles:"Back to File Manager",subtitleAdmin:"Deleted files stay here for {{days}} days, then auto-delete. This view shows trashed files for all users.",subtitleUser:"Deleted files stay here for {{days}} days, then auto-delete.",loading:"Loading trash…",loadError:"Could not load the trash.",empty:"The trash is empty.",summary:"{{count}} files · {{size}}",emptyTrash:"Empty trash",restore:"Restore",purgeNow:"Delete now",autoPurgeIn:"Auto-deletes in {{when}}",days:"days",retentionLabel:"Auto-delete after",selectAll:"Select all",selectOne:"Select {{filename}}",selectionCount:"{{count}} selected",bulkRestore:"Restore selected",bulkPurge:"Delete selected",col:{filename:"File",folder:"Folder",size:"Size",deleted:"Moved to trash",autoPurge:"Auto-deletes",owner:"Owner",actions:"Actions"},confirm:{purgeTitle:"Delete permanently?",purgeBody:"{{filename}} will be deleted from disk and cannot be restored.",emptyTitle:"Empty the trash?",emptyBody:"All {{count}} files will be deleted from disk. This cannot be undone.",bulkPurgeTitle:"Delete selected files permanently?",bulkPurgeBody:"The {{count}} selected files will be deleted from disk and cannot be restored.",cta:"Delete permanently"},toast:{restored:"File restored.",restoreFailed:"Could not restore the file.",purged:"File deleted permanently.",purgeFailed:"Could not delete the file.",emptied:"Deleted {{count}} file(s) from trash.",emptyFailed:"Could not empty the trash.",retentionSaved:"Auto-delete set to {{days}} days.",retentionFailed:"Could not save retention setting.",bulkRestored:"Restored {{count}} file(s).",bulkPurged:"Deleted {{count}} file(s)."}},libraryPurge:{title:"Purge old files",headerButton:"Purge old",headerTooltip:"Bulk-move old files to trash",description:"Sweep old files out of your library in one shot. Files with a print history are aged by their last-printed date; files that were never printed are aged by their upload date.",ageLabel:"Move files older than",days:"days",includeNeverPrinted:"Include files that have never been printed",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"Checking how many files match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} files · {{size}} would move to trash",andMore:"…and {{count}} more",warning:"Trashed files still count against storage until the retention window expires. Empty the Trash afterwards to free disk immediately.",confirmCta:"Move {{count}} to trash",purging:"Moving to trash…",toast:{success:"Moved {{count}} file(s) to trash.",failed:"Could not purge files."}},libraryAutoPurge:{enableLabel:"Auto-purge old files",enableDescription:"Runs the admin purge once per day. Files go to Trash first — they are not deleted immediately.",ageLabel:"Auto-purge files older than",ageDescription:"Minimum 7 days, maximum 10 years. Uses the same age rule as the manual Purge button.",days:"days",includeNeverPrinted:"Include files that have never been printed",saveFailed:"Could not save auto-purge settings."},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},vme={nav:{printers:"Drucker",archives:"Archiv",queue:"Warteschlange",stats:"Statistiken",profiles:"Profile",maintenance:"Wartung",projects:"Projekte",inventory:"Filament",files:"Dateimanager",makerworld:"MakerWorld",notifications:"Benachrichtigungen",settings:"Einstellungen",system:"System",collapseSidebar:"Seitenleiste einklappen",expandSidebar:"Seitenleiste ausklappen",update:"Update",updateAvailable:"Update verfügbar: v{{version}}",updateAvailableBanner:"Version {{version}} ist verfügbar!",viewUpdate:"Update anzeigen",viewOnGithub:"Auf GitHub ansehen",keyboardShortcuts:"Tastaturkürzel (?)",switchToLight:"Zum hellen Modus wechseln",switchToDark:"Zum dunklen Modus wechseln",smartSwitches:"Smart Switches",logout:"Abmelden"},common:{save:"Speichern",saving:"Speichern...",cancel:"Abbrechen",delete:"Löschen",edit:"Bearbeiten",add:"Hinzufügen",close:"Schließen",confirm:"Bestätigen",loading:"Lädt...",error:"Fehler",success:"Erfolg",warning:"Warnung",enabled:"Aktiviert",disabled:"Deaktiviert",yes:"Ja",no:"Nein",on:"An",off:"Aus",all:"Alle",none:"Keine",search:"Suchen",filter:"Filtern",sort:"Sortieren",refresh:"Aktualisieren",download:"Herunterladen",upload:"Hochladen",uploading:"Hochladen...",uploadFailed:"Hochladen fehlgeschlagen",actions:"Aktionen",status:"Status",name:"Name",description:"Beschreibung",date:"Datum",time:"Zeit",hours:"Stunden",minutes:"Minuten",seconds:"Sekunden",days:"Tage",enable:"Aktivieren",disable:"Deaktivieren",permissions:"Berechtigungen",noPrinters:"Keine Drucker konfiguriert",noData:"Keine Daten verfügbar",linkNotFound:"Link nicht gefunden",required:"Erforderlich",optional:"Optional",dismiss:"Schließen",apply:"Anwenden",reset:"Zurücksetzen",export:"Exportieren",import:"Importieren",clear:"Leeren",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",noChange:"— Keine Änderung —",unchanged:"Unverändert",unassigned:"Nicht zugewiesen",unknown:"Unbekannt",unknownError:"Unbekannter Fehler",today:"Heute",tomorrow:"Morgen",asap:"Sofort",overdue:"Überfällig",now:"Jetzt",collapse:"Einklappen",expand:"Ausklappen",viewArchive:"Archiv anzeigen",viewInFileManager:"Im Dateimanager anzeigen",addedBy:"Hinzugefügt von {{username}}",prints:"Drucke",more:"+{{count}} weitere",ascending:"Aufsteigend",descending:"Absteigend",back:"Zurück",copy:"Kopieren",copied:"Kopiert!",printer:"Drucker",remove:"Entfernen",type:"Typ",print:"Drucken",rename:"Umbenennen",move:"Verschieben",create:"Erstellen",duplicate:"Duplizieren",left:"Links",right:"Rechts"},printers:{title:"Drucker",addPrinter:"Drucker hinzufügen",editPrinter:"Drucker bearbeiten",deletePrinter:"Drucker löschen",printerName:"Druckername",serialNumber:"Seriennummer",ipAddress:"IP-Adresse / Hostname",accessCode:"Zugangscode",model:"Modell",nozzleCount:"Düsenanzahl",autoArchive:"Automatische Archivierung",status:{available:"Verfügbar",idle:"Bereit",printing:"Druckt",paused:"Pausiert",offline:"Offline",problem:"Problem",error:"Fehler",finished:"Fertig",unknown:"Unbekannt"},temperatures:{nozzle:"Düse",bed:"Druckbett",chamber:"Kammer"},progress:"{{percent}}% abgeschlossen",timeRemaining:"Noch {{time}}",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',maintenanceOk:"Wartung OK",maintenanceWarning:"{{count}} Warnung",maintenanceWarning_plural:"{{count}} Warnungen",maintenanceDue:"{{count}} fällig",maintenanceDue_plural:"{{count}} fällig",sort:{name:"Name",status:"Status",model:"Modell",location:"Standort",ascending:"Aufsteigend sortieren",descending:"Absteigend sortieren"},cardSize:{small:"Kleine Karten",medium:"Mittlere Karten",large:"Große Karten",extraLarge:"Extra große Karten"},hideOffline:"Offline ausblenden",nextAvailable:"Nächster verfügbar",powerOn:"Einschalten",offlinePrintersWithPlugs:"Offline-Drucker mit Smart-Plugs",noPrintersConfigured:"Noch keine Drucker konfiguriert",search:"Drucker suchen...",noSearchResults:"Keine Drucker entsprechen deiner Suche oder deinen Filtern",filter:{allStatuses:"Alle Status",allLocations:"Alle Standorte"},readyToPrint:"Druckbereit",external:"Extern",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Druckarchive löschen",noLabel:"Keine Bezeichnung",printPreview:"Druckvorschau",width:"Breite",height:"Höhe",noObjectsFound:"Keine Objekte gefunden",objectsLoadedOnPrintStart:"Objekte werden beim Druckstart geladen",willBeSkipped:"Wird übersprungen",name:"Name",serialCannotBeChanged:"Seriennummer kann nicht geändert werden",locationHelp:"Dient zur Gruppierung von Druckern und zum Filtern von Warteschlangenaufträgen",wifiSignal:{veryWeak:"Sehr schwach",weak:"Schwach",fair:"Ausreichend",good:"Gut",excellent:"Ausgezeichnet"},maintenanceUpToDate:"Alle Wartungen aktuell - Klicken zum Anzeigen",chamberLightOn:"Kammerbeleuchtung einschalten",chamberLightOff:"Kammerbeleuchtung ausschalten",files:"Dateien",browseFiles:"Druckerdateien durchsuchen",autoOffAfterPrint:"Automatisches Ausschalten nach Druck",autoOffExecuted:"Auto-off wurde ausgeführt - Drucker einschalten zum Zurücksetzen",hmsErrors:"HMS-Fehler",viewHmsErrors:"{{count}} HMS-Fehler anzeigen",resume:"Fortsetzen",pause:"Pausieren",stop:"Stoppen",camera:"Kamera",skipObject:"Objekt überspringen",reconnect:"Neu verbinden",forceRefresh:"Aktualisierung erzwingen",forceRefreshSuccess:"Aktualisierung angefordert",mqttDebug:"MQTT-Debug",printerInformation:"Druckerinformationen",copyToClipboard:"Kopieren",copied:"Kopiert!",state:"Zustand",wifiSignalLabel:"WLAN-Signal",developerMode:"Entwicklermodus",enabled:"Aktiviert",disabled:"Deaktiviert",addedOn:"Hinzugefügt",sdCard:"SD-Karte",inserted:"Eingelegt",notInserted:"Nicht eingelegt",totalPrintHours:"Druckstunden",activeNozzle:"Aktiv: {{nozzle}} Düse",nozzleRack:"Düsenhalter",nozzleDocked:"Angedockt",nozzleMounted:"Montiert",nozzleActive:"Aktiv",nozzleIdle:"Inaktiv",nozzleDiameter:"Durchmesser",nozzleType:"Typ",nozzleStatus:"Status",nozzleFilament:"Filament",nozzleWear:"Verschleiß",nozzleMaxTemp:"Max Temp",nozzleSerial:"Seriennr.",nozzleHardenedSteel:"Gehärteter Stahl",nozzleStainlessSteel:"Edelstahl",nozzleTungstenCarbide:"Wolframkarbid",nozzleFlow:"Durchfluss",nozzleHighFlow:"High Flow",nozzleStandardFlow:"Standard",firmwareUpdate:"Firmware-Update",firmwareInstructions:"Gehen Sie auf dem Touchscreen des Druckers zu",firmwareNav:"Navigieren Sie zu",settings:"Einstellungen",firmware:"Firmware",discoverPrinters:"Drucker entdecken",searching:"Suche...",manualEntry:"Manuelle Eingabe",addFromCloud:"Aus Cloud hinzufügen",toast:{printerDeleted:"Drucker gelöscht",missingSpoolAssignment:"Druck gestartet auf {{printer}}. Fehlende Spulenzuordnung für: {{slots}}",printerAdded:"Drucker hinzugefügt",printerUpdated:"Drucker aktualisiert",failedToDelete:"Drucker konnte nicht gelöscht werden",failedToAdd:"Drucker konnte nicht hinzugefügt werden",failedToUpdate:"Drucker konnte nicht aktualisiert werden",commandSent:"Befehl gesendet",failedToSendCommand:"Befehl konnte nicht gesendet werden",turnedOn:"{{name}} eingeschaltet",failedToPowerOn:"{{name}} konnte nicht eingeschaltet werden",scriptTriggered:"Skript ausgelöst",printStopped:"Druck gestoppt",printPaused:"Druck pausiert",printResumed:"Druck fortgesetzt",referenceDeleted:"Referenz gelöscht",detectionAreaSaved:"Erkennungsbereich gespeichert",failedToRunScript:"Skript konnte nicht ausgeführt werden",failedToStopPrint:"Druck konnte nicht gestoppt werden",failedToPausePrint:"Druck konnte nicht pausiert werden",failedToResumePrint:"Druck konnte nicht fortgesetzt werden",failedToControlChamberLight:"Kammerbeleuchtung konnte nicht gesteuert werden",failedToSetSpeed:"Druckgeschwindigkeit konnte nicht eingestellt werden",failedToUpdateSetting:"Einstellung konnte nicht aktualisiert werden",failedToSkipObjects:"Objekte konnten nicht übersprungen werden",failedToRereadRfid:"RFID konnte nicht erneut gelesen werden",failedToCheckPlate:"Platte konnte nicht überprüft werden",failedToUpdateLabel:"Bezeichnung konnte nicht aktualisiert werden",failedToDeleteReference:"Referenz konnte nicht gelöscht werden",failedToSaveDetectionArea:"Erkennungsbereich konnte nicht gespeichert werden",plateCheckEnabled:"Plattenprüfung aktiviert",plateCheckDisabled:"Plattenprüfung deaktiviert",calibrationSaved:"Kalibrierung gespeichert!",calibrationFailed:"Kalibrierung fehlgeschlagen",rfidRereadInitiated:"RFID-Neueinlesen gestartet"},connection:{connected:"Verbunden",offline:"Offline"},plateStatus:{markCleared:"Platte als freigegeben markieren",cleared:"Platte freigegeben",notCleared:"Platte nicht freigegeben",inUse:"Platte in Benutzung"},queue:{inQueue:"{{count}} Druck in Warteschlange",inQueue_plural:"{{count}} Drucke in Warteschlange"},controls:"Steuerung",rfid:{reread:"RFID neu lesen"},bedJog:{title:"Druckbett bewegen",bed:"Bett",step:"Schritt (mm)",up:"Platte hoch",down:"Platte runter",disabledWhilePrinting:"Während des Drucks deaktiviert",notHomedTitle:"Drucker ist nicht referenziert",notHomedMessage:"Der Drucker wurde seit dem letzten Druck nicht referenziert. Führen Sie zuerst die automatische Referenzfahrt aus (parkt den Werkzeugkopf und referenziert dann X, Y und Z) oder bewegen Sie trotzdem — die Software-Endschalter werden dabei umgangen.",homeZ:"Automatische Referenzfahrt",moveAnyway:"Trotzdem bewegen",homingStarted:"Drucker wird automatisch referenziert…"},permission:{noAdd:"Sie haben keine Berechtigung, Drucker hinzuzufügen",noEdit:"Sie haben keine Berechtigung, Drucker zu bearbeiten",noDelete:"Sie haben keine Berechtigung, Drucker zu löschen",noControl:"Sie haben keine Berechtigung, Drucker zu steuern",noFiles:"Sie haben keine Berechtigung, auf Druckerdateien zuzugreifen",noAmsRfid:"Sie haben keine Berechtigung, AMS-RFID erneut zu lesen",noSmartPlugControl:"Sie haben keine Berechtigung, Smart Plugs zu steuern",noCamera:"Sie haben keine Berechtigung, Kameras anzuzeigen"},modal:{addTitle:"Drucker hinzufügen",editTitle:"Drucker bearbeiten",myPrinter:"Mein Drucker",selectModel:"Modell auswählen...",locationGroup:"Standort / Gruppe (optional)",locationPlaceholder:"z.B. Werkstatt, Büro, Keller",autoArchiveLabel:"Abgeschlossene Drucke automatisch archivieren",fromPrinterSettings:"Aus Druckereinstellungen",modelOptional:"Modell (optional)",saveChanges:"Änderungen speichern"},skipObjects:{tooltip:"Objekte überspringen",onlyWhilePrinting:"Objekte überspringen (nur während des Drucks)",requiresMultiple:"Objekte überspringen (erfordert 2+ Objekte)",title:"Objekte überspringen",matchIdsInfo:"IDs mit Drucker-Display abgleichen",printerShowsIds:"Der Druckerbildschirm zeigt Objekt-IDs auf der Bauplatte",skipSelected:"Ausgewählte überspringen",skipping:"Überspringe...",noObjectsSelected:"Keine Objekte ausgewählt",selectObjectsToSkip:"Wählen Sie Objekte aus, die Sie vom aktuellen Druck überspringen möchten",skipped:"übersprungen",objectsSkipped:"Objekte übersprungen",activeCount:"{{count}} aktiv",waitForLayer:"Warten Sie auf Schicht 2+ zum Überspringen von Objekten (aktuell Schicht {{layer}})",skip:"Überspringen",confirmTitle:"Objekt überspringen?",confirmMessage:'Möchten Sie "{{name}}" wirklich überspringen? Dies kann nicht rückgängig gemacht werden.'},confirm:{deleteTitle:"Drucker löschen",deleteMessage:'Möchten Sie "{{name}}" wirklich löschen? Alle Verbindungseinstellungen werden entfernt.',deleteArchivesNote:"Der gesamte Druckverlauf für diesen Drucker wird dauerhaft gelöscht.",keepArchivesNote:"Der Druckverlauf wird beibehalten, aber nicht mehr mit diesem Drucker verknüpft.",stopTitle:"Druck stoppen",stopMessage:'Möchten Sie den aktuellen Druck auf "{{name}}" wirklich stoppen? Der Druckauftrag wird abgebrochen.',stopButton:"Druck stoppen",pauseTitle:"Druck pausieren",pauseMessage:'Möchten Sie den aktuellen Druck auf "{{name}}" wirklich pausieren?',pauseButton:"Druck pausieren",resumeTitle:"Druck fortsetzen",resumeMessage:'Möchten Sie den Druck auf "{{name}}" fortsetzen?',resumeButton:"Druck fortsetzen",powerOnTitle:"Drucker einschalten",powerOnMessage:'Möchten Sie die Stromversorgung für "{{name}}" wirklich EINSCHALTEN?',powerOnButton:"Einschalten",powerOffTitle:"Drucker ausschalten",powerOffMessage:'Möchten Sie die Stromversorgung für "{{name}}" wirklich AUSSCHALTEN?',powerOffWarning:'WARNUNG: "{{name}}" druckt gerade! Möchten Sie die Stromversorgung wirklich AUSSCHALTEN? Dies unterbricht den Druck und kann den Drucker beschädigen.',powerOffButton:"Ausschalten"},bulk:{select:"Auswählen",selectAll:"Alle auswählen",selectByLocation:"Nach Standort auswählen",selected:"{{count}} ausgewählt",actions:{stop:"Stoppen",pause:"Pausieren",resume:"Fortsetzen",clearPlate:"Druckbett leeren",clearHMS:"Benachrichtigungen löschen"},confirm:{stopTitle:"{{count}} Drucke stoppen",stopMessage:"Dies wird aktive Drucke auf {{count}} Drucker(n) abbrechen. Diese Aktion kann nicht rückgängig gemacht werden.",stopButton:"Alle stoppen",pauseTitle:"{{count}} Drucke pausieren",pauseMessage:"Dies wird aktive Drucke auf {{count}} Drucker(n) pausieren.",pauseButton:"Alle pausieren",clearPlateTitle:"{{count}} Druckbetten leeren",clearPlateMessage:"Dies wird das Druckbett auf {{count}} Drucker(n) leeren und kann wartende Aufträge starten.",clearPlateButton:"Alle leeren"},success:"{{action}} auf {{count}} Drucker(n) abgeschlossen",partial:"{{succeeded}} erfolgreich, {{failed}} fehlgeschlagen",noneApplicable:"Keine ausgewählten Drucker sind im richtigen Zustand für diese Aktion",selectByState:"Nach Status auswählen"},discovery:{title:"Drucker entdecken",searching:"Suche...",scanning:"Scanne...",scanProgress:"Scanne... {{scanned}}/{{total}}",foundPrinters:"{{count}} Drucker gefunden",noPrintersFound:"Keine Drucker gefunden",noPrintersFoundSubnet:"Keine Drucker im angegebenen Subnetz gefunden.",noPrintersFoundNetwork:"Keine Drucker im Netzwerk gefunden.",allConfigured:"Alle erkannten Drucker sind bereits konfiguriert.",alreadyAdded:"Bereits hinzugefügt",select:"Auswählen",manualEntry:"Manuelle Eingabe",addFromCloud:"Aus Cloud hinzufügen",subnetToScan:"Zu scannendes Subnetz",dockerNote:"Docker erkannt. Geben Sie das Subnetz Ihres Druckers in CIDR-Notation ein. Erfordert network_mode: host in docker-compose.yml.",scanSubnet:"Subnetz nach Druckern scannen",discoverNetwork:"Drucker im Netzwerk suchen",scanningSubnet:"Subnetz wird nach Bambu-Druckern gescannt...",scanningNetwork:"Netzwerk wird gescannt...",serialRequired:"Seriennummer erforderlich",unknown:"Unbekannt",failedToStart:"Erkennung konnte nicht gestartet werden"},drying:{start:"Trocknung starten",stop:"Trocknung stoppen",temperature:"Temperatur",duration:"Dauer",hours:"Stunden",timeRemaining:"{{time}} verbleibend",active:"Trocknung",notSupported:"Trocknung nicht unterstützt",powerRequired:"AMS-Netzteil anschließen, um Trocknung zu aktivieren",startingDrying:"Trocknung wird gestartet...",stoppingDrying:"Trocknung wird gestoppt...",rotateTray:"Spule während der Trocknung drehen"},filaments:"Filamente",openCameraOverlay:"Kamera-Overlay öffnen",openCameraWindow:"Kamera in neuem Fenster öffnen",firmwareUpdateAvailable:"Firmware-Update verfügbar: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Aktuell",firmwareUpdateButton:"Update",plateDetection:{noPermission:"Sie haben keine Berechtigung, Drucker zu aktualisieren",enabledClick:"Plattenprüfung aktiviert - Klicken zum Deaktivieren",disabledClick:"Plattenprüfung deaktiviert - Klicken zum Aktivieren",manageCalibration:"Platten-Erkennungskalibrierung verwalten",calibrationRequired:"Kalibrierung erforderlich",calibrationInstructions:"Bitte stellen Sie sicher, dass die Druckplatte <strong>vollständig leer</strong> ist, und klicken Sie dann auf Kalibrieren.",calibrationDescription:"Die Kalibrierung erfasst ein Referenzbild der leeren Platte. Zukünftige Prüfungen vergleichen mit dieser Referenz, um Objekte zu erkennen.",calibrationTip:"<strong>Tipp:</strong> Sie können bis zu 5 Kalibrierungen für verschiedene Platten speichern. Das System verwendet automatisch die beste Übereinstimmung bei der Prüfung.",plateEmpty:"Platte erscheint leer",objectsDetected:"Objekte auf Platte erkannt",confidence:"Konfidenz",difference:"Differenz",analysisPreview:"Analysevorschau:",analysisLegend:"Grüner Rahmen = Erkennungsbereich, Rote Überlagerung = Unterschiede zur Kalibrierung",savedReferences:"Gespeicherte Referenzen ({{count}}/{{max}})",deleteReference:"Referenz löschen",labelPlaceholder:"Bezeichnung...",clickToEdit:"{{label}} - Zum Bearbeiten klicken",clickToAddLabel:"Zum Hinzufügen einer Bezeichnung klicken"},speed:{title:"Druckgeschwindigkeit",silent:"Leise (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Luftkanal-Modus",cooling:"Kühlen",heating:"Heizen"},noSdCard:"Keine SD",door:{open:"Offen",closed:"Zu"},fans:{partCooling:"Bauteilkühlung",auxiliary:"Hilfsventilator",chamber:"Kammerventilator"},clickToViewHmsErrors:"Klicken, um HMS-Fehler anzuzeigen",estimatedCompletion:"Geschätzte Fertigstellungszeit",plateNumber:"Platte {{number}}",slotOptions:"Slot-Optionen",amsPopup:{friendlyName:"AMS-Name",friendlyNamePlaceholder:"z. B. AMS-Anzeigename",serialNumber:"Seriennummer",firmwareVersion:"Firmware",save:"Speichern",clear:"Löschen",noEditPermission:"Sie haben keine Berechtigung, AMS-Einheiten umzubenennen"},firmwareModal:{title:"Firmware-Update",titleUpToDate:"Firmware-Info",currentVersion:"Aktuell:",latestVersion:"Neueste:",releaseNotes:"Versionshinweise",checkingPrereqs:"Prüfe Voraussetzungen...",sdCardReady:"SD-Karte bereit. Klicken Sie unten, um die Firmware hochzuladen.",uploadedSuccess:"Firmware auf SD-Karte hochgeladen!",applyInstructions:"So wenden Sie das Update auf Ihrem Drucker an:",step1:"Gehen Sie auf dem Touchscreen des Druckers zu <strong>Einstellungen</strong>",step2:"Navigieren Sie zu <strong>Firmware</strong>",step3:"Wählen Sie <strong>Update von SD-Karte</strong>",step4:"Das Update dauert 10-20 Minuten",done:"Fertig",starting:"Starte...",uploadFirmware:"Firmware hochladen",uploadFailed:"Upload fehlgeschlagen: {{error}}",uploadedToast:"Firmware hochgeladen! Starten Sie das Update vom Druckerbildschirm.",availableVersions:"Verfügbare Versionen",usable:"Installierbar",unavailable:"Nicht verfügbar",installed:"Installiert",newerBadge:"neuer",olderBadge:"älter",currentBadge:"aktuell"},accessCodePlaceholder:"Leer lassen, um den aktuellen zu behalten",roi:{title:"Erkennungsbereich (ROI)",xStart:"X-Start",yStart:"Y-Start",width:"Breite",height:"Höhe",instruction:"Passen Sie den Erkennungsbereich an, um sich auf die Druckplatte zu konzentrieren. Der grüne Rahmen in der Vorschau zeigt den aktuellen Bereich."},developerModeWarning:"Der Entwickler-LAN-Modus ist nicht aktiviert auf: {{names}}. Einige Funktionen funktionieren möglicherweise nicht.",howToEnable:"Aktivieren",incompatibleFile:"Diese Datei wurde für {{slicedFor}} geslicet, aber dieser Drucker ist ein {{printerModel}}",dropNotPrintable:"Nur .gcode- und .gcode.3mf-Dateien können gedruckt werden",dropToPrint:"Zum Drucken ablegen",cannotPrint:"Drucker beschäftigt"},archives:{title:"Druckarchiv",searchPlaceholder:"Archiv durchsuchen...",filterByPrinter:"Nach Drucker filtern",filterByStatus:"Nach Status filtern",sortBy:"Sortieren nach",sortNewest:"Neueste zuerst",sortOldest:"Älteste zuerst",sortName:"Name",sortDuration:"Dauer",sortLargest:"Größte zuerst",sortSmallest:"Kleinste zuerst",sortSize:"Größe",noArchives:"Keine Archive gefunden",noArchivesSearch:"Keine Archive entsprechen Ihrer Suche",originalPrintNotVisible:"Ursprünglicher Druck nicht sichtbar - versuchen Sie, die Filter zu löschen",noArchivesYet:"Noch keine Archive",prints:"Drucke",pagination:{showing:"Zeige",to:"bis",of:"von",show:"Zeige",page:"Seite",all:"Alle"},loadingArchives:"Lade Archive...",releaseToUpload:"Loslassen zum Hochladen",showAll:"Alle anzeigen",showFavoritesOnly:"Nur Favoriten anzeigen",gridView:"Rasteransicht",listView:"Listenansicht",calendarView:"Kalenderansicht",logView:"Druckprotokoll",manageTags:"Tags verwalten",showFailedPrints:"Fehlgeschlagene Drucke anzeigen",hideFailedPrints:"Fehlgeschlagene Drucke ausblenden",hideDuplicates:"Duplikate ausblenden",viewOriginalPrint:"Klicken, um den ursprünglichen Druck anzuzeigen (#{{id}})",printTime:"Druckzeit",filamentUsed:"Verbrauchtes Filament",cost:"Kosten",reprint:"Drucken",preview:"Vorschau",deleteArchive:"Archiv löschen",deleteConfirm:"Möchten Sie dieses Archiv wirklich löschen?",favorite:"Favorit",unfavorite:"Aus Favoriten entfernen",viewDetails:"Details anzeigen",status:{completed:"Abgeschlossen",failed:"Fehlgeschlagen",stopped:"Gestoppt"},toast:{source3mfAttached:"Quell-3MF angehängt: {{filename}}",failedUploadSource3mf:"Fehler beim Hochladen der Quell-3MF",source3mfRemoved:"Quell-3MF entfernt",failedRemoveSource3mf:"Fehler beim Entfernen der Quell-3MF",f3dAttached:"F3D angehängt: {{filename}}",failedUploadF3d:"Fehler beim Hochladen der F3D",f3dRemoved:"F3D entfernt",failedRemoveF3d:"Fehler beim Entfernen der F3D",timelapseAttached:"Zeitraffer angehängt: {{filename}}",timelapseAlreadyAttached:"Zeitraffer bereits angehängt",noMatchingTimelapse:"Kein passender Zeitraffer gefunden",failedScanTimelapse:"Fehler beim Suchen nach Zeitraffer",failedAttachTimelapse:"Fehler beim Anhängen des Zeitraffers",timelapseRemoved:"Zeitraffer entfernt",failedRemoveTimelapse:"Fehler beim Entfernen des Zeitraffers",timelapseUploaded:"Zeitraffer hochgeladen: {{filename}}",failedUploadTimelapse:"Fehler beim Hochladen des Zeitraffers",archiveDeleted:"Archiv gelöscht",failedDeleteArchive:"Fehler beim Löschen des Archivs",addedToFavorites:"Zu Favoriten hinzugefügt",removedFromFavorites:"Aus Favoriten entfernt",projectUpdated:"Projekt aktualisiert",failedUpdateProject:"Fehler beim Aktualisieren des Projekts",linkCopied:"Link in die Zwischenablage kopiert",failedCopyLink:"Fehler beim Kopieren des Links",photoDeleted:"Foto gelöscht",failedDeletePhoto:"Fehler beim Löschen des Fotos",failedDeleteArchives:"Fehler beim Löschen der Archive",failedUpdateFavorites:"Fehler beim Aktualisieren der Favoriten",exportDownloaded:"Export heruntergeladen",exportFailed:"Export fehlgeschlagen"},menu:{print:"Drucken",schedule:"Planen",openInBambuStudio:"Im Slicer öffnen",slice:"Slicen",externalLink:"Externer Link",viewOnMakerWorld:"Auf MakerWorld ansehen",preview3d:"3D-Vorschau",viewTimelapse:"Zeitraffer ansehen",scanForTimelapse:"Nach Zeitraffer suchen",uploadTimelapse:"Zeitraffer hochladen",removeTimelapse:"Zeitraffer entfernen",downloadSource3mf:"Quell-3MF herunterladen",uploadSource3mf:"Quell-3MF hochladen",replaceSource3mf:"Quell-3MF ersetzen",removeSource3mf:"Quell-3MF entfernen",uploadF3d:"F3D hochladen",replaceF3d:"F3D ersetzen",downloadF3d:"F3D herunterladen",removeF3d:"F3D entfernen",download:"Herunterladen",copyDownloadLink:"Download-Link kopieren",qrCode:"QR-Code",viewPhotos:"Fotos ansehen",viewPhotosCount:"Fotos ansehen ({{count}})",projectPage:"Projektseite",addToFavorites:"Zu Favoriten hinzufügen",removeFromFavorites:"Aus Favoriten entfernen",edit:"Bearbeiten",goToProject:"Zum Projekt: {{name}}",addToProject:"Zu Projekt hinzufügen",removeFromProject:"Aus Projekt entfernen",loading:"Laden...",noProjectsAvailable:"Keine Projekte verfügbar",searchProjects:"Projekte suchen…",select:"Auswählen",deselect:"Abwählen",delete:"Löschen"},permission:{noReprint:"Sie haben keine Berechtigung, dieses Archiv erneut zu drucken",noAddToQueue:"Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen",noUpdateArchives:"Sie haben keine Berechtigung, Archive zu aktualisieren",noUploadFiles:"Sie haben keine Berechtigung, Dateien hochzuladen",noDownload:"Sie haben keine Berechtigung, Archive herunterzuladen",noCopyLink:"Sie haben keine Berechtigung, Download-Links zu kopieren",noDelete:"Sie haben keine Berechtigung, dieses Archiv zu löschen",noCreate:"Sie haben keine Berechtigung, Archive zu erstellen"},platePicker:{title:"Platte zur Vorschau auswählen",hint:"Dieses Archiv enthält mehrere Platten. Wähle eine, um sie im GCode-Viewer zu öffnen.",plateLabel:"Platte {{index}}",objectCount:"{{count}} Objekt",objectCount_plural:"{{count}} Objekte",noGcode:"Dieses Archiv enthält keinen geschnittenen G-Code zur Vorschau. Öffne es zuerst in Bambu Studio zum Slicen."},card:{previousPlate:"Vorherige Platte",nextPlate:"Nächste Platte",plateNumber:"Platte {{index}}",moreOptions:"Rechtsklick für mehr Optionen",addToFavorites:"Zu Favoriten hinzufügen",removeFromFavorites:"Aus Favoriten entfernen",cancelled:"abgebrochen",failed:"fehlgeschlagen",duplicate:"Duplikat",duplicateTitle:"Dieses Modell wurde bereits zuvor gedruckt",openSource3mf:"Quell-3MF in Bambu Studio öffnen (Rechtsklick für mehr Optionen)",downloadF3d:"Fusion 360 Designdatei herunterladen",viewTimelapse:"Zeitraffer ansehen",viewPhoto:"1 Foto ansehen",viewPhotos:"{{count}} Fotos ansehen",openFolder:"Ordner öffnen: {{name}}",slicedFile:"Geslicte Datei - druckbereit",sourceFile:"Nur Quelldatei - keine AMS-Zuordnung verfügbar",gcode:"GCODE",source:"QUELLE",project:"Projekt: {{name}}",estimated:"Geschätzt: {{time}}",actual:"Tatsächlich: {{time}}",accuracy:"Genauigkeit: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} Schicht",layers:"{{count}} Schichten",object:"{{count}} Objekt",objects:"{{count}} Objekte",slicedFor:"Geslict für {{model}}",uploadedBy:"Hochgeladen von",noPermissionReprint:"Sie haben keine Berechtigung, erneut zu drucken",noFileForReprint:"Keine 3MF-Datei verfügbar — die Datei konnte beim Aufzeichnen des Drucks nicht vom Drucker heruntergeladen werden",noPermissionEdit:"Sie haben keine Berechtigung, Archive zu bearbeiten",noPermissionDelete:"Sie haben keine Berechtigung, Archive zu löschen",reprint:"Drucken",schedulePrint:"Druck planen",schedule:"Planen",openInBambuStudio:"Im Slicer öffnen",openInBambuStudioToSlice:"Im Slicer öffnen zum Slicen",slice:"Slicen",externalLink:"Externer Link",makerWorld:"MakerWorld: {{designer}}",viewProject:"Projekt ansehen",noExternalLink:"Kein externer Link",preview3d:"3D-Vorschau",download:"Herunterladen",edit:"Bearbeiten",delete:"Löschen"},modal:{deleteArchive:"Archiv löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.',deleteButton:"Löschen",removeSource3mf:"Quell-3MF entfernen",removeSource3mfConfirm:'Möchten Sie die Quell-3MF-Datei wirklich von "{{name}}" entfernen? Die ursprüngliche Slicer-Projektdatei wird gelöscht.',removeButton:"Entfernen",removeF3d:"F3D entfernen",removeF3dConfirm:'Möchten Sie die Fusion 360 Designdatei wirklich von "{{name}}" entfernen?',removeTimelapse:"Zeitraffer entfernen",removeTimelapseConfirm:'Möchten Sie das Zeitraffervideo wirklich von "{{name}}" entfernen?',timelapse:"{{name}} - Zeitraffer",selectTimelapse:"Zeitraffer auswählen",selectTimelapseDesc:"Keine automatische Übereinstimmung gefunden. Wählen Sie den Zeitraffer für diesen Druck:",deleteArchives:"Archive löschen",deleteArchivesConfirm:"Möchten Sie wirklich {{count}} Archiv(e) löschen? Diese Aktion kann nicht rückgängig gemacht werden.",deleteCount:"{{count}} löschen"},page:{title:"Archive",printsCount:"{{filtered}} von {{total}} Drucken",dropFilesHere:".3mf-Dateien hier ablegen",releaseToUpload:"Loslassen zum Hochladen",only3mfSupported:"Nur .3mf-Dateien werden unterstützt",close:"Schließen",selected:"{{count}} ausgewählt",selectAll:"Alle auswählen",tags:"Tags",project:"Projekt",favorite:"Favorit",delete:"Löschen",toggledFavorites:"Favoriten für {{count}} Archiv(e) umgeschaltet",failedUpdateFavorites:"Fehler beim Aktualisieren der Favoriten",archivesDeleted:"{{count}} Archiv(e) gelöscht",failedDeleteArchives:"Fehler beim Löschen der Archive",photoDeleted:"Foto gelöscht",failedDeletePhoto:"Fehler beim Löschen des Fotos"},list:{name:"Name",printer:"Drucker",date:"Datum",size:"Größe",actions:"Aktionen",hasTimelapse:"Hat Zeitraffer"},log:{date:"Datum",printName:"Druckname",printer:"Drucker",user:"Benutzer",status:"Status",duration:"Dauer",filament:"Filament",allPrinters:"Alle Drucker",allUsers:"Alle Benutzer",allStatuses:"Alle Status",cancelled:"Abgebrochen",skipped:"Übersprungen",dateFrom:"Von",dateTo:"Bis",noEntries:"Keine Druckprotokolleinträge gefunden",showing:"{{count}} von {{total}} Einträgen",rowsPerPage:"Zeilen",page:"Seite",prev:"Zurück",next:"Weiter",clearLog:"Protokoll löschen",clearLogTitle:"Druckprotokoll löschen",clearLogConfirm:"Alle Druckprotokolleinträge werden dauerhaft gelöscht. Archive und Warteschlangeneinträge sind nicht betroffen. Diese Aktion kann nicht rückgängig gemacht werden. Sind Sie sicher?",clearLogButton:"Alle löschen",cleared:"{{count}} Protokolleinträge gelöscht",clearFailed:"Druckprotokoll konnte nicht gelöscht werden"}},queue:{title:"Druckwarteschlange",subtitle:"Planen und verwalten Sie Ihre Druckaufträge",addToQueue:"Zur Warteschlange hinzufügen",print:"Drucken",reprint:"Erneut drucken",schedulePrint:"Druck planen",editQueueItem:"Warteschlangeneintrag bearbeiten",printToPrinters:"Auf {{count}} Druckern drucken",queueToPrinters:"Zu {{count}} Druckern hinzufügen",queueSelectedPlates:"{{count}} Platten in die Warteschlange",selectAllPlates:"Alle {{count}} Platten auswählen",deselectAll:"Alle abwählen",printQueued:"Druck in Warteschlange",itemsQueued:"{{count}} Einträge in Warteschlange",sending:"Wird gesendet...",sendingProgress:"Sende {{current}}/{{total}}...",adding:"Wird hinzugefügt...",addingProgress:"Füge hinzu {{current}}/{{total}}...",savingProgress:"Speichere {{current}}/{{total}}...",clearQueue:"Warteschlange leeren",clearHistory:"Verlauf löschen",emptyQueue:"Warteschlange ist leer",position:"Position",scheduledTime:"Geplante Zeit",moveUp:"Nach oben",moveDown:"Nach unten",startNow:"Jetzt starten",printingInProgress:"Druck läuft...",viewArchive:"Archiv anzeigen",viewInFileManager:"Im Dateimanager anzeigen",itemCount:"{{count}} Element",itemCount_plural:"{{count}} Elemente",dragToReorder:"Ziehen zum Neuordnen (nur Sofort)",reorderHint:"Position betrifft nur Sofort-Elemente. Geplante Elemente werden zur festgelegten Zeit ausgeführt.",sjf:{label:"SJF",tooltip:"Kürzester Auftrag zuerst — Scheduler bevorzugt kürzere Drucke"},addedBy:"Hinzugefügt von {{name}}",nextInQueue:"Nächster in der Warteschlange",clearPlateSuccess:"Druckplatte freigegeben — bereit für nächsten Druck",plateNumber:"Platte {{index}}",quantity:"Menge",quantityHint:"Erstellt {{count}} Warteschlangeneinträge",activeBatches:"Aktive Stapel",batchProgress:"{{completed}} von {{total}} abgeschlossen",cancelBatch:"Verbleibende abbrechen",batchCancelled:"Verbleibende Stapeleinträge abgebrochen",cancelBatchConfirmTitle:"Stapel abbrechen",cancelBatchConfirmMessage:"Alle verbleibenden ausstehenden Einträge in diesem Stapel abbrechen?",batch:"Stapel",sections:{currentlyPrinting:"Aktuell druckend",queued:"In Warteschlange",history:"Verlauf"},status:{pending:"Ausstehend",waiting:"Wartend",printing:"Druckt",paused:"Pausiert",completed:"Abgeschlossen",failed:"Fehlgeschlagen",skipped:"Übersprungen",cancelled:"Abgebrochen"},summary:{printing:"Druckt",queued:"In Warteschlange",totalTime:"Gesamte Wartezeit",totalWeight:"Gesamtgewicht der Warteschlange",history:"Verlauf"},filter:{allPrinters:"Alle Drucker",unassigned:"Nicht zugewiesen",allStatus:"Alle Status",allLocations:"Alle Standorte",any:"Beliebig"},sort:{byPosition:"Nach Position sortieren",byName:"Nach Name sortieren",byPrinter:"Nach Drucker sortieren",bySchedule:"Nach Zeitplan sortieren",byDate:"Nach Datum sortieren",ascendingOldest:"Aufsteigend (älteste zuerst)",descendingNewest:"Absteigend (neueste zuerst)"},badges:{staged:"Bereitgestellt",requiresPrevious:"Erfordert vorherigen Erfolg",autoPowerOff:"Automatisch ausschalten",gcodeInjection:"G-code"},empty:{title:"Keine Drucke geplant",description:'Planen Sie einen Druck von der Archivseite über die Option "Planen" im Kontextmenü oder ziehen Sie Dateien hierher.'},time:{asap:"Sofort",overdue:"Überfällig",now:"Jetzt",lessThanMinute:"In weniger als einer Minute",inMinutes:"In {{count}} Min",inHours:"In {{count}} Stunden"},actions:{stopPrint:"Druck stoppen",startPrint:"Druck starten",requeue:"Erneut einreihen"},bulkEdit:{title:"{{count}} Element bearbeiten",title_plural:"{{count}} Elemente bearbeiten",description:"Nur geänderte Einstellungen werden auf ausgewählte Elemente angewendet.",printer:"Drucker",noChange:"— Keine Änderung —",queueOptions:"Warteschlangenoptionen",staged:"Bereitgestellt (manueller Start)",autoPowerOff:"Nach Druck automatisch ausschalten",requirePrevious:"Vorherigen Erfolg erfordern",printOptions:"Druckoptionen",bedLevelling:"Bett-Nivellierung",flowCalibration:"Fluss-Kalibrierung",vibrationCalibration:"Vibrations-Kalibrierung",layerInspection:"Erste-Schicht-Prüfung",timelapse:"Zeitraffer",useAms:"AMS verwenden",applyChanges:"Änderungen übernehmen",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",selected:"{{count}} ausgewählt",editSelected:"Ausgewählte bearbeiten",cancelSelected:"Ausgewählte abbrechen"},confirm:{cancelTitle:"Geplanten Druck abbrechen",cancelMessage:'Möchten Sie "{{name}}" wirklich abbrechen?',stopTitle:"Druck stoppen",stopMessage:'Möchten Sie den aktuellen Druck "{{name}}" wirklich stoppen? Der Druckauftrag wird am Drucker abgebrochen.',removeTitle:"Aus Verlauf entfernen",removeMessage:'Möchten Sie "{{name}}" wirklich aus dem Warteschlangenverlauf entfernen?',clearHistoryTitle:"Verlauf löschen",clearHistoryMessage:"Möchten Sie alle {{count}} Element(e) aus dem Verlauf entfernen?",cancelButton:"Druck abbrechen",stopButton:"Druck stoppen",thisPrint:"diesen Druck",thisItem:"dieses Element"},toast:{cancelled:"Warteschlangenelement abgebrochen",cancelFailed:"Element konnte nicht abgebrochen werden",removed:"Warteschlangenelement entfernt",removeFailed:"Element konnte nicht entfernt werden",stopped:"Druck gestoppt",stopFailed:"Druck konnte nicht gestoppt werden",released:"Druck in Warteschlange freigegeben",startFailed:"Druck konnte nicht gestartet werden",reorderFailed:"Warteschlange konnte nicht neu geordnet werden",historyCleared:"{{count}} Verlaufselement(e) gelöscht",clearHistoryFailed:"Verlauf konnte nicht gelöscht werden",updateFailed:"Elemente konnten nicht aktualisiert werden",bulkCancelled:"{{count}} Element(e) abgebrochen",bulkCancelFailed:"Elemente konnten nicht abgebrochen werden"},timeline:{listView:"Liste",timelineView:"Zeitstrahl",unassigned:"Nicht zugewiesen",noData:"Keine geplanten Drucke für diesen Tag",allDoneBy:"Alle Drucke voraussichtlich fertig um {{time}}",staged:"Bereitgestellt",filterAll:"Alle anzeigen",filterPrinting:"Druckend",filterQueued:"Warteschlange",time:{anyMoment:"jeden Moment",minutesLeft:"{{minutes}}m übrig",hoursLeft:"{{hours}}h übrig",hoursMinutesLeft:"{{hours}}h {{minutes}}m übrig"},day:{previous:"Vorheriger Tag",next:"Nächster Tag",today:"Heute"}},permissions:{noStopPrint:"Sie haben keine Berechtigung, Drucke zu stoppen",noStartPrint:"Sie haben keine Berechtigung, Drucke zu starten",noEdit:"Sie haben keine Berechtigung, dieses Warteschlangenelement zu bearbeiten",noCancel:"Sie haben keine Berechtigung, dieses Warteschlangenelement abzubrechen",noRequeue:"Sie haben keine Berechtigung, Elemente erneut einzureihen",noRemove:"Sie haben keine Berechtigung, dieses Warteschlangenelement zu entfernen",noClearHistory:"Sie haben keine Berechtigung, den gesamten Verlauf zu löschen",noEditItems:"Sie haben keine Berechtigung, Warteschlangenelemente zu bearbeiten",noCancelItems:"Sie haben keine Berechtigung, Warteschlangenelemente abzubrechen"}},backgroundDispatch:{unknownFile:"Unbekannte Datei",unknownPrinter:"Unbekannter Drucker",startingPrints:"Starte Drucke",progressSummary:"{{complete}}/{{total}} abgeschlossen • Geplant: {{dispatched}} • In Bearbeitung: {{processing}}",expandDetails:"Dispatch-Details ausklappen",collapseDetails:"Dispatch-Details einklappen",dismissToast:"Dispatch-Hinweis schließen",cancelDispatchJob:"Dispatch-Job abbrechen",cancel:"Abbrechen",cancelling:"Wird abgebrochen…",awaitingPrinter:"Warte auf Drucker…",status:{dispatched:"Geplant",processing:"In Bearbeitung",completed:"Abgeschlossen",failed:"Fehlgeschlagen",cancelled:"Abgebrochen"},toast:{cancellingUpload:"Upload wird abgebrochen...",cancelled:"Dispatch abgebrochen",cancelFailed:"Dispatch konnte nicht abgebrochen werden",completeWithFailures:"Background Dispatch abgeschlossen: {{completed}} erfolgreich, {{failed}} fehlgeschlagen",completeSuccess:"Background Dispatch abgeschlossen: {{completed}} erfolgreich",printStartedRemaining:"{{completed}} Druck(e) gestartet, {{remaining}} weitere werden gesendet..."}},stats:{title:"Dashboard",subtitle:"Widgets zum Neuanordnen ziehen. Auf das Augensymbol klicken zum Ausblenden.",overview:"Übersicht",totalPrints:"Gesamtdrucke",successRate:"Erfolgsrate",totalPrintTime:"Gesamtdruckzeit",printTime:"Druckzeit",totalFilament:"Gesamtverbrauch Filament",filamentUsed:"Filamentverbrauch",filamentCost:"Filamentkosten",totalCost:"Gesamtkosten",energyUsed:"Energieverbrauch",energyCost:"Energiekosten",energyWarmingUpTooltip:"Die Energieerfassung sammelt noch stündliche Snapshots. Zeitraumwerte werden genau, sobald vor dem gewählten Bereich mindestens ein Snapshot vorliegt. Frühe Werte können zu niedrig sein.",averagePrintTime:"Durchschnittliche Druckzeit",printsPerDay:"Drucke pro Tag",byPrinter:"Nach Drucker",printsByPrinter:"Drucke nach Drucker",byMaterial:"Nach Material",byMonth:"Nach Monat",last7Days:"Letzte 7 Tage",last30Days:"Letzte 30 Tage",last90Days:"Letzte 90 Tage",allTime:"Gesamt",quickStats:"Schnellstatistiken",printActivity:"Druckaktivität",filamentTypes:"Filamenttypen",filamentTrends:"Filamenttrends",failureAnalysis:"Fehleranalyse",timeAccuracy:"Zeitgenauigkeit",successful:"Erfolgreich:",failed:"Fehlgeschlagen:",perfectEstimate:"100% = perfekte Schätzung",noTimeAccuracyData:"Noch keine Zeitgenauigkeitsdaten",noFilamentData:"Keine Filamentdaten verfügbar",noPrinterData:"Keine Druckerdaten verfügbar",noPrintData:"Keine Druckdaten verfügbar",noPrintDataLast30Days:"Keine Druckdaten in den letzten 30 Tagen",failureReasons:"Fehlerursachen",topFailureReasons:"Häufigste Fehlerursachen",failedPrintsCount:"{{failed}} / {{total}} Drucke fehlgeschlagen",lastWeekRate:"Letzte Woche: {{rate}}%",resetLayout:"Layout zurücksetzen",recalculateCosts:"Kosten neu berechnen",recalculateCostsHint:"Alle Archivkosten mit aktuellen Filamentpreisen neu berechnen",exportStats:"Statistiken exportieren",exportAsCsv:"Als CSV exportieren",exportAsExcel:"Als Excel exportieren",hiddenCount:"{{count}} ausgeblendet",exportDownloaded:"Export heruntergeladen",exportFailed:"Export fehlgeschlagen",layoutReset:"Layout zurückgesetzt",recalculatedCosts:"Kosten für {{count}} Archive neu berechnet",recalculateFailed:"Kosten konnten nicht neu berechnet werden",loadingStats:"Statistiken werden geladen...",noPermissionResetLayout:"Sie haben keine Berechtigung, das Layout zurückzusetzen",noPermissionRecalculate:"Sie haben keine Berechtigung, Kosten neu zu berechnen",noPrintDataInRange:"Keine Druckdaten im ausgewählten Zeitraum",periodFilament:"Filamentverbrauch",periodCost:"Kosten",avgPerPrint:"Durchschnitt pro Druck",usageOverTime:"Verbrauch im Zeitverlauf",filamentByWeight:"Gewicht",printDuration:"Druckdauer",printerUtilization:"Druckerauslastung",filamentSuccess:"Erfolg nach Material",printHabits:"Druckgewohnheiten",printTimeOfDay:"Druck-Tageszeit",colorDistribution:"Farbverteilung",noColorData:"Keine Farbdaten verfügbar",records:"Rekorde",longestPrint:"Längster Druck",heaviestPrint:"Schwerster Druck",mostExpensivePrint:"Teuerster Druck",busiestDay:"Aktivster Tag",successStreak:"Erfolgsserie",streakPrint:"aufeinanderfolgender Druck",streakPrints:"{{count}} aufeinanderfolgende Drucke",printerStats:"Druckerstatistiken",hours:"Stunden",avgPrints:"Ø Drucke",noArchiveData:"Keine Druckdaten verfügbar",filamentByTime:"Zeitverlauf",avgWeight:"Ø Gewicht",avgTime:"Ø Zeit",filamentByPrints:"Drucke",timeframe:{today:"Heute","this-week":"Diese Woche","this-month":"Dieser Monat","last-7":"Letzte 7 Tage","last-30":"Letzte 30 Tage","last-90":"Letzte 90 Tage","this-year":"Dieses Jahr","all-time":"Gesamt",custom:"Benutzerdefiniert",from:"Von",to:"Bis"},allUsers:"Alle Benutzer",noUser:"Kein Benutzer (System)",filterByUser:"Nach Benutzer filtern"},maintenance:{title:"Wartung",overview:"Übersicht",allOk:"Alle Wartungen aktuell",dueCount:"{{count}} Aufgabe fällig",dueCount_plural:"{{count}} Aufgaben fällig",warningCount:"{{count}} Warnung",warningCount_plural:"{{count}} Warnungen",totalPrintTime:"Gesamtdruckzeit",nextMaintenance:"Nächste Wartung",nothingDue:"Nichts fällig",tasks:"Aufgaben",lastPerformed:"Zuletzt durchgeführt",interval:"Intervall",hoursRemaining:"{{hours}}h verbleibend",hoursOverdue:"{{hours}}h überfällig",markDone:"Als erledigt markieren",performMaintenance:"Wartung durchführen",history:"Verlauf",noHistory:"Kein Wartungsverlauf",editPrintHours:"Druckstunden bearbeiten",currentHours:"Aktuelle Stunden",statusTab:"Status",settingsTab:"Einstellungen",overdueCount:"{{count}} überfällig",dueSoonCount:"{{count}} bald fällig",dueSoon:"Bald fällig",allGood:"Alles in Ordnung",overdueBy:"Überfällig um {{duration}}",dueIn:"Fällig in {{duration}}",timeLeft:"{{duration}} verbleibend",day:"1 Tag",days:"{{count}} Tage",week:"1 Woche",weeks:"{{count}} Wochen",month:"1 Monat",months:"{{count}} Monate",year:"1 Jahr",maintenanceTypes:"Wartungstypen",maintenanceTypesDescription:"Systemtypen und Ihre benutzerdefinierten Wartungsaufgaben",addCustomType:"Benutzerdefinierten Typ hinzufügen",restoreDefaults:"Standardaufgaben wiederherstellen",intervalType:"Intervalltyp",intervalValue:"Intervall ({{type}})",icon:"Symbol",documentationLink:"Dokumentationslink (optional)",assignToPrinters:"Druckern zuweisen",selectAtLeastOnePrinter:"Wählen Sie mindestens einen Drucker",addType:"Typ hinzufügen",custom:"Benutzerdefiniert",printHours:"Druckstunden",calendarDays:"Kalendertage",exampleName:"z.B. HEPA-Filter ersetzen",viewDocumentation:"Dokumentation anzeigen",timeBasedInterval:"Zeitbasiertes Intervall",intervalOverrides:"Intervall-Überschreibungen",intervalOverridesDescription:"Intervalle für bestimmte Drucker anpassen",assignedToPrinters:"Druckern zugewiesen:",noPrintersAssigned:"Keine Drucker zugewiesen",addPrinterShort:"Hinzufügen:",printersAssignedClick:"{{count}} Drucker zugewiesen - klicken zum Verwalten",removeFromPrinter:"Von diesem Drucker entfernen",types:{lubricateCarbonRods:"Karbonstäbe schmieren",lubricateRails:"Linearschienen schmieren",cleanNozzle:"Düse/Hotend reinigen",checkBelts:"Riemenspannung prüfen",cleanBuildPlate:"Druckbett reinigen",checkExtruder:"Extruderzahnräder prüfen",checkCooling:"Kühlungslüfter prüfen",generalInspection:"Allgemeine Inspektion",cleanCarbonRods:"Kohlenstoffstangen reinigen",lubricateSteelRods:"Stahlstangen schmieren",cleanSteelRods:"Stahlstangen reinigen",cleanLinearRails:"Linearschienen reinigen",checkPtfeTube:"PTFE-Schlauch prüfen",replaceHepaFilter:"HEPA-Filter ersetzen",replaceCarbonFilter:"Aktivkohlefilter ersetzen",lubricateLeftNozzleRail:"Linke Düsenschiene schmieren"},maintenanceComplete:"Wartung als abgeschlossen markiert",typeUpdated:"Wartungstyp aktualisiert",typeDeleted:"Wartungstyp gelöscht",defaultsRestored:"{{count}} Standardaufgabe(n) wiederhergestellt",printHoursUpdated:"Druckstunden aktualisiert",printerAssigned:"Drucker zugewiesen",printerRemoved:"Drucker entfernt",deleteTypeConfirm:'"{{name}}" löschen?',deleteSystemTypeTitle:"Standard-Wartungsaufgabe löschen?",deleteSystemTypeMessage:'Möchten Sie die Standard-Wartungsaufgabe "{{name}}" wirklich löschen?',noPermissionUpdate:"Sie haben keine Berechtigung, Wartungselemente zu aktualisieren",noPermissionPerform:"Sie haben keine Berechtigung, Wartungen durchzuführen",noPermissionEditTypes:"Sie haben keine Berechtigung, Wartungstypen zu bearbeiten",noPermissionDeleteTypes:"Sie haben keine Berechtigung, Wartungstypen zu löschen",noPermissionEditHours:"Sie haben keine Berechtigung, Druckstunden zu bearbeiten",noPermissionRemovePrinter:"Sie haben keine Berechtigung, Druckerzuweisungen zu entfernen",noPermissionAssignPrinter:"Sie haben keine Berechtigung, Drucker zuzuweisen",noPermissionEditIntervals:"Sie haben keine Berechtigung, Intervalle zu bearbeiten",configureSettings:"Wartungstypen und Intervalle konfigurieren"},settings:{title:"Einstellungen",general:"Allgemein",tabs:{general:"Allgemein",smartPlugs:"Smart Plugs",notifications:"Benachrichtigungen",queue:"Workflow",filament:"Filament",network:"Netzwerk",apiKeys:"API-Schlüssel",virtualPrinter:"Virtueller Drucker",spoolbuddy:"SpoolBuddy",failureDetection:"Fehlererkennung",users:"Authentifizierung",backup:"Sicherung",emailAuth:"E-Mail-Authentifizierung",ldap:"LDAP",twoFa:"Zwei-Faktor-Auth",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy-Geräte",infoBody:"SpoolBuddy-Kioske registrieren sich automatisch per Heartbeat. Ein Gerät hier abmelden, wenn es nicht mehr verwendet wird oder wenn ein veralteter Eintrag nach einem Daemon-Absturz übrig geblieben ist.",duplicatesTitle:"{{count}} Geräte registriert",duplicatesBody:"Die Kiosk-Oberfläche verwendet nur das zuerst registrierte Gerät. Falls eines davon ein veralteter Doppeleintrag nach einem Absturz ist, kann es hier entfernt werden — ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.",empty:"Noch keine SpoolBuddy-Geräte registriert.",online:"Online",offline:"Offline",unregister:"Abmelden",unregisterSuccess:"Gerät abgemeldet",unregisterError:"Gerät konnte nicht abgemeldet werden",confirmTitle:"SpoolBuddy-Gerät abmelden?",confirmBody:'Dies entfernt „{{hostname}}" ({{deviceId}}) aus der Datenbank. Ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.',ipAddress:"IP-Adresse",firmware:"Firmware",lastSeen:"Zuletzt gesehen",daemonUptime:"Daemon-Laufzeit",systemUptime:"System-Laufzeit",never:"nie",nfc:"NFC",scale:"Waage",cpuTemp:"CPU-Temp.",memory:"Speicher",disk:"Festplatte",update:"Aktualisieren",updateConfirmTitle:"Spoolbuddy-Daemon aktualisieren?",updateConfirmBody:'Software-Update auf „{{hostname}}" auslösen? Der Daemon startet nach dem Update neu.',restartBrowser:"Browser neu starten",restartBrowserConfirmTitle:"Kiosk-Browser neu starten?",restartBrowserConfirmBody:'Kiosk-Browser auf „{{hostname}}" neu starten? Die Anzeige wird kurz schwarz.',restartDaemon:"Daemon neu starten",restartDaemonConfirmTitle:"Spoolbuddy-Daemon neu starten?",restartDaemonConfirmBody:'Spoolbuddy-Daemon auf „{{hostname}}" neu starten? Das Gerät ist für einige Sekunden offline.',reboot:"Neustart",rebootConfirmTitle:"Gerät neu starten?",rebootConfirmBody:'„{{hostname}}" neu starten? Das Gerät ist für etwa eine Minute offline.',shutdown:"Herunterfahren",shutdownConfirmTitle:"Gerät herunterfahren?",shutdownConfirmBody:'„{{hostname}}" herunterfahren? Physischer Zugriff ist nötig, um es wieder einzuschalten.',commandConfirm:"Bestätigen",commandQueued:"Befehl eingereiht",commandError:"Befehl konnte nicht gesendet werden"},ldap:{title:"LDAP-Authentifizierung",enabledDesc:"LDAP-Authentifizierung ist aktiviert",disabledDesc:"LDAP-Authentifizierung ist deaktiviert",disabledHint:"LDAP-Einstellungen unten konfigurieren und speichern, dann aktivieren.",enabled:"LDAP-Authentifizierung aktiviert",disabled:"LDAP-Authentifizierung deaktiviert",feature1:"Benutzer können sich mit LDAP-Anmeldedaten anmelden",feature2:"Lokales Admin-Konto bleibt als Fallback erhalten",feature3:"LDAP-Gruppen werden bei der Anmeldung BamBuddy-Gruppen zugeordnet",serverConfig:"LDAP-Server-Konfiguration",serverUrl:"Server-URL",serverUrlHint:"Verwenden Sie ldap:// für Standard oder ldaps:// für SSL-Verbindungen",security:"Sicherheit",securityHint:"StartTLS aktualisiert eine einfache Verbindung auf TLS. LDAPS verwendet TLS von Anfang an.",bindDn:"Bind-DN (Dienstkonto)",bindPassword:"Bind-Passwort",searchBase:"Such-Basis-DN",userFilter:"Benutzer-Suchfilter",userFilterHint:"{username} wird durch den Anmeldenamen ersetzt. Verwenden Sie (uid={username}) für OpenLDAP.",autoProvision:"Benutzer automatisch anlegen",autoProvisionHint:"Automatisch ein BamBuddy-Konto bei der ersten LDAP-Anmeldung erstellen",defaultGroup:"Standardgruppe",defaultGroupNone:"— Keine (kein Fallback) —",defaultGroupHint:"Fallback-Gruppe, die zugewiesen wird, wenn sich ein LDAP-Benutzer authentifiziert, aber in keiner zugeordneten LDAP-Gruppe enthalten ist. Leer lassen, um nicht zugeordnete Benutzer ohne Berechtigungen zu belassen.",groupMapping:"Gruppenzuordnung (JSON)",groupMappingHint:"LDAP-Gruppen-DNs BamBuddy-Gruppen zuordnen. Verfügbare Gruppen: ",testConnection:"Verbindung testen",settingsSaved:"LDAP-Einstellungen gespeichert",errors:{serverRequired:"LDAP-Server-URL ist erforderlich",searchBaseRequired:"Such-Basis-DN ist erforderlich",enableAuthFirst:"Authentifizierung zuerst aktivieren",configureLdapFirst:"LDAP-Einstellungen zuerst speichern"}},email:{smtpSettings:"SMTP-Konfiguration",smtpHost:"SMTP-Server",smtpPort:"SMTP-Port",security:"Sicherheit",authentication:"Authentifizierung",username:"Benutzername",password:"Passwort",fromEmail:"Absender-E-Mail",fromName:"Absendername",testConnection:"SMTP-Verbindung testen",testRecipient:"Test-Empfänger-E-Mail",sendTest:"Test-E-Mail senden",sending:"Wird gesendet...",save:"Einstellungen speichern",saving:"Wird gespeichert...",advancedAuth:"Erweiterte Authentifizierung",advancedAuthEnabled:"Erweiterte Authentifizierung ist aktiviert",advancedAuthEnabledDesc:"E-Mail-basierte Benutzerverwaltungsfunktionen sind aktiv. Neue Benutzer erhalten automatisch generierte Passwörter per E-Mail und können ihr Passwort über die Passwort vergessen Funktion zurücksetzen.",advancedAuthDisabled:"Erweiterte Authentifizierung ist deaktiviert",advancedAuthDisabledDesc:"Aktivieren Sie die erweiterte Authentifizierung, um E-Mail-basierte Funktionen für die Benutzerverwaltung zu aktivieren.",enable:"Aktivieren",disable:"Deaktivieren",feature1:"Passwörter werden automatisch generiert und an neue Benutzer gesendet",feature2:"Benutzer können sich mit Benutzername oder E-Mail anmelden",feature3:"Passwort vergessen Funktion ist verfügbar",feature4:"Administratoren können Benutzerpasswörter per E-Mail zurücksetzen",errors:{requiredFields:"Bitte füllen Sie alle Pflichtfelder aus",usernameRequired:"Benutzername ist erforderlich, wenn Authentifizierung aktiviert ist",enterTestEmail:"Bitte geben Sie eine Test-E-Mail-Adresse ein",smtpServerAndEmail:"Bitte füllen Sie SMTP-Server und Absender-E-Mail aus, bevor Sie testen",usernamePasswordRequired:"Benutzername und Passwort sind erforderlich, wenn Authentifizierung aktiviert ist",configureSmtpFirst:"Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen",enableAuthFirst:"Bitte aktivieren Sie zuerst die Authentifizierung, um E-Mail-basierte Funktionen nutzen zu können."},success:{settingsSaved:"SMTP-Einstellungen erfolgreich gespeichert"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"Keine (Port 25)"},authOptions:{enabled:"Aktiviert",disabled:"Deaktiviert"}},appearance:"Erscheinungsbild",notifications:"Benachrichtigungen",smartPlugs:"Smart Plugs",spoolman:"Spoolman",updates:"Updates",language:"Sprache",languageDescription:"Wählen Sie Ihre bevorzugte Sprache",theme:"Design",themeLight:"Hell",themeDark:"Dunkel",themeSystem:"System",defaultView:"Standardansicht",defaultViewDescription:"Seite, die beim Öffnen der App angezeigt wird",checkForUpdates:"Nach Updates suchen",autoUpdate:"Automatische Updates",currentVersion:"Aktuelle Version",latestVersion:"Neueste Version",upToDate:"Sie sind auf dem neuesten Stand",updateAvailable:"Update verfügbar",notificationLanguage:"Benachrichtigungssprache",notificationLanguageDescription:"Sprache für Push-Benachrichtigungen",bedCooledThreshold:"Bett-Abkühlung Schwellenwert",bedCooledThresholdDescription:"Temperatur, unter der das Bett nach einem Druck als abgekühlt gilt",userNotificationsEnabled:"Benutzerbenachrichtigungen",userNotificationsEnabledDescription:"Aktiviert das Benutzerbenachrichtigungsmenü und E-Mail-Benachrichtigungen für Druckereignisse. Erfordert Erweiterte Authentifizierung.",userNotificationsDisabledHint:"Erweiterte Authentifizierung aktivieren, um Benutzerbenachrichtigungen zu verwenden.",notificationProviders:"Benachrichtigungsanbieter",addProvider:"Anbieter hinzufügen",editProvider:"Anbieter bearbeiten",providerType:"Anbietertyp",testNotification:"Testbenachrichtigung",testSuccess:"Testbenachrichtigung erfolgreich gesendet",testFailed:"Testbenachrichtigung konnte nicht gesendet werden",quietHours:"Ruhezeiten",quietHoursDescription:"Keine Störungen während dieser Zeiten",quietHoursStart:"Beginn",quietHoursEnd:"Ende",events:{title:"Benachrichtigungsereignisse",printStart:"Druck gestartet",printComplete:"Druck abgeschlossen",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",printProgress:"Fortschrittsmeldungen",printProgressDescription:"Bei 25%, 50%, 75% benachrichtigen",printerOffline:"Drucker offline",printerError:"Druckerfehler",filamentLow:"Filament niedrig",maintenanceDue:"Wartung fällig",maintenanceDueDescription:"Benachrichtigen, wenn Wartung erforderlich"},smartPlug:{title:"Smart Plugs",add:"Smart Plug hinzufügen",edit:"Smart Plug bearbeiten",name:"Name",ipAddress:"IP-Adresse",linkedPrinter:"Verknüpfter Drucker",autoOn:"Automatisch einschalten",autoOnDescription:"Einschalten beim Druckstart",autoOff:"Automatisch ausschalten",autoOffDescription:"Ausschalten nach Druckende",offDelay:"Ausschaltverzögerung",offDelayMinutes:"Minuten nach Druck",offDelayTemp:"Wenn Düse unter Temperatur",currentState:"Aktueller Status",turnOn:"Einschalten",turnOff:"Ausschalten"},filamentTracking:"Filament-Verfolgung",filamentTrackingDesc:"Wählen Sie, wie Sie Ihre Filamentspulen verfolgen möchten. Sie können das integrierte Inventar oder einen externen Spoolman-Server verwenden.",filamentChecks:"Filament-Prüfungen",disableFilamentWarnings:"Filament-Warnungen deaktivieren",disableFilamentWarningsDesc:"Keine Warnungen über unzureichendes Filament beim Drucken oder Einreihen anzeigen",preferLowestFilament:"Niedrigsten Filamentrest bevorzugen",preferLowestFilamentDesc:"Bei mehreren passenden Spulen die mit dem geringsten Restfilament verwenden",trackingModeBuiltIn:"Integriertes Inventar",trackingModeBuiltInDesc:"RFID-Erkennung und Verbrauchserfassung inklusive",trackingModeSpoolmanDesc:"Externer Filament-Management-Server",builtInFeatureRfid:"Erkennt automatisch Bambu Lab RFID-Spulen im AMS",builtInFeatureUsage:"Erfasst den Filamentverbrauch pro Druck",builtInFeatureCatalog:"Spulen, Farben und K-Faktor-Profile verwalten",builtInFeatureThirdParty:"Drittanbieter-Spulen können Inventarspulen zugewiesen werden",amsSyncButton:"Gewichte vom AMS synchronisieren",amsSyncTitle:"Spulengewichte vom AMS synchronisieren",amsSyncMessage:"Alle Inventar-Spulengewichte werden mit den aktuellen AMS-Restwerten der verbundenen Drucker überschrieben. Verwenden Sie dies zur Wiederherstellung beschädigter Gewichtsdaten. Drucker müssen online sein.",amsSyncing:"Synchronisiere...",amsSyncSuccess:"{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen",amsSyncError:"Synchronisierung der Gewichte vom AMS fehlgeschlagen",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL Ihres Spoolman-Servers (z.B. http://localhost:7912)",spoolmanConnected:"Verbunden",spoolmanDisconnected:"Nicht verbunden",status:"Status",connect:"Verbinden",disconnect:"Trennen",howSyncWorks:"So funktioniert die Synchronisierung",syncInfoRfidOnly:"Nur offizielle Bambu Lab Spulen mit RFID werden synchronisiert",syncInfoAutoCreate:"Neue Spulen werden bei der ersten Synchronisierung automatisch in Spoolman erstellt",syncInfoThirdPartySkipped:"Nicht-Bambu-Lab-Spulen (Drittanbieter, nachgefüllt) werden übersprungen",linkingExistingSpools:"Vorhandene Spulen verknüpfen",linkingExistingSpoolsDesc:'Um vorhandene Spoolman-Spulen mit Ihrem AMS zu verknüpfen, fahren Sie über einen AMS-Slot und klicken Sie auf "Mit Spoolman verknüpfen".',syncMode:"Synchronisierungsmodus",syncModeAuto:"Automatisch",syncModeManual:"Nur manuell",syncModeAutoDesc:"AMS-Daten werden automatisch synchronisiert, wenn Änderungen erkannt werden",syncModeManualDesc:"Nur bei manueller Auslösung synchronisieren",syncAmsData:"AMS-Daten synchronisieren",syncAmsDataDesc:"AMS-Daten des Druckers manuell mit Spoolman synchronisieren",allPrinters:"Alle Drucker",noDefaultPrinter:"Kein Standard (jedes Mal fragen)",sidebarOrder:"Seitenleisten-Reihenfolge",saveThumbnails:"Vorschaubilder speichern",captureFinishPhoto:"Abschlussfoto aufnehmen",noPrintersConfigured:"Keine Drucker konfiguriert",archiveMode:{always:"Immer Archiveintrag erstellen",never:"Nie Archiveintrag erstellen",ask:"Jedes Mal fragen"},checkForUpdatesLabel:"Nach Updates suchen",checkPrinterFirmware:"Drucker-Firmware prüfen",includeBetaUpdates:"Beta-Versionen einschließen",includeBetaUpdatesDesc:"Über Beta- und Vorabversionen bei der Updateprüfung benachrichtigen",enableRetry:"Wiederholung aktivieren",homeAssistantDescription:"Smart Plugs über Home Assistant steuern",environmentManagedLabel:"(Umgebungsvariable)",autoEnabledViaEnv:"Automatisch über Umgebungsvariablen aktiviert",urlFromEnvReadOnly:"Wert wird über HA_URL Umgebungsvariable gesetzt (schreibgeschützt)",tokenFromEnvReadOnly:"Wert wird über HA_TOKEN Umgebungsvariable gesetzt (schreibgeschützt)",mqttConnectedTo:"Verbunden mit",prometheusDescription:"Druckerdaten im Prometheus-Format bereitstellen",noSmartPlugsTitle:"Keine Smart Plugs konfiguriert",noSmartPlugsDescription:"Fügen Sie einen Tasmota-basierten Smart Plug hinzu, um den Energieverbrauch zu verfolgen und die Stromsteuerung zu automatisieren.",noProvidersTitle:"Keine Anbieter konfiguriert",noProvidersDescription:"Fügen Sie einen Anbieter hinzu, um Benachrichtigungen zu erhalten.",noTemplatesAvailable:"Keine Vorlagen verfügbar. Starten Sie das Backend neu, um Standardvorlagen zu laden.",apiPermissionView:"Druckerstatus und Warteschlange anzeigen",apiPermissionEdit:"Elemente zur Druckwarteschlange hinzufügen und entfernen",apiKeysEmptyTitle:"Keine API-Schlüssel",apiKeysEmptyDescription:"Erstellen Sie einen API-Schlüssel zur Integration mit externen Diensten.",noUsersFound:"Keine Benutzer gefunden",noGroupsFound:"Keine Gruppen gefunden",noGroupsAvailable:"Keine Gruppen verfügbar",passwordsDoNotMatch:"Passwörter stimmen nicht überein",systemGroupWarning:"System-Gruppennamen können nicht geändert werden",authDisabledTitle:"Authentifizierung ist deaktiviert",authDisabledFeature1:"Anmeldung zum Zugriff auf das System erforderlich",authDisabledFeature2:"Mehrere Benutzer mit gruppenbasierten Berechtigungen erstellen",authDisabledFeature3:"Zugriff mit über 50 granularen Berechtigungen steuern",userHasCreated:"Dieser Benutzer hat erstellt:",userItemsQuestion:"Was möchten Sie mit diesen Elementen tun?",deleteUserConfirm:"Möchten Sie diesen Benutzer wirklich löschen?",actionCannotBeUndone:"Diese Aktion kann nicht rückgängig gemacht werden.",addFirstSmartPlug:"Ersten Smart Plug hinzufügen",providers:"Anbieter",log:"Protokoll",testAll:"Alle testen",testResults:"Testergebnisse",testPassedCount:"{{count}} bestanden",testFailedCount:"{{count}} fehlgeschlagen",messageTemplates:"Nachrichtenvorlagen",messageTemplatesDescription:"Passen Sie Benachrichtigungen für jedes Ereignis an.",apiKeys:"API-Schlüssel",apiKeysDescription:"Erstellen Sie API-Schlüssel für externe Integrationen und Webhooks.",createKey:"Schlüssel erstellen",apiKeyCreated:"API-Schlüssel erfolgreich erstellt",apiKeyCopyWarning:"Kopieren Sie diesen Schlüssel jetzt - er wird nicht mehr angezeigt!",useInApiBrowser:"Im API-Browser verwenden",createNewApiKey:"Neuen API-Schlüssel erstellen",keyName:"Schlüsselname",keyNamePlaceholder:"z.B. Home Assistant, OctoPrint",readStatus:"Status lesen",readStatusDescription:"Druckerstatus und Warteschlange anzeigen",manageQueue:"Warteschlange verwalten",manageQueueDescription:"Elemente zur Druckwarteschlange hinzufügen und entfernen",controlPrinter:"Drucker steuern",controlPrinterDescription:"Drucke pausieren, fortsetzen und stoppen",unnamedKey:"Unbenannter Schlüssel",lastUsed:"Zuletzt verwendet",read:"Lesen",control:"Steuern",createFirstKey:"Ersten Schlüssel erstellen",webhookEndpoints:"Webhook-Endpunkte",webhookApiKeyHint:"Verwenden Sie Ihren API-Schlüssel im X-API-Key-Header.",webhook:{getAllStatus:"Alle Druckerstatus abrufen",getSpecificStatus:"Spezifischen Druckerstatus abrufen",addToQueue:"Zur Druckwarteschlange hinzufügen",pausePrint:"Druck pausieren",resumePrint:"Druck fortsetzen",stopPrint:"Druck stoppen"},apiBrowser:"API-Browser",apiBrowserDescription:"Erkunden und testen Sie alle verfügbaren API-Endpunkte.",apiKeyForTesting:"API-Schlüssel zum Testen",apiKeyPlaceholder:"Fügen Sie hier Ihren API-Schlüssel ein, um authentifizierte Endpunkte zu testen...",apiKeyHint:"Dieser Schlüssel wird als X-API-Key-Header mit Anfragen gesendet.",deleteApiKeyTitle:"API-Schlüssel löschen",deleteApiKeyMessage:"Möchten Sie diesen API-Schlüssel wirklich löschen? Alle Integrationen, die diesen Schlüssel verwenden, funktionieren nicht mehr.",deleteKey:"Schlüssel löschen",amsDisplayThresholds:"AMS-Anzeigeschwellenwerte",amsThresholdsDescription:"Konfigurieren Sie Farbschwellenwerte für AMS-Feuchtigkeits- und Temperaturanzeigen.",humidity:"Luftfeuchtigkeit",goodGreen:"Gut (grün)",fairOrange:"Mittel (orange)",aboveFairBad:"Über dem mittleren Schwellenwert wird rot angezeigt (schlecht)",fairAlsoDryingThreshold:"Dieser Schwellenwert wird auch für die automatische Trocknung verwendet",temperature:"Temperatur",goodBlue:"Gut (blau)",aboveFairHot:"Über dem mittleren Schwellenwert wird rot angezeigt (heiß)",historyRetention:"Verlaufsaufbewahrung",keepSensorHistory:"Sensorverlauf behalten für",historyRetentionDescription:"Ältere Feuchtigkeits- und Temperaturdaten werden automatisch gelöscht",defaultPrintOptions:"Standard-Druckoptionen",defaultPrintOptionsDescription:"Standardwerte für Druckoptionen bei neuen Drucken festlegen. Diese können im Druckdialog pro Druck überschrieben werden.",defaultBedLevelling:"Bett-Nivellierung",defaultBedLevellingDesc:"Bett vor dem Druck automatisch nivellieren",defaultFlowCali:"Fluss-Kalibrierung",defaultFlowCaliDesc:"Extrusionsfluss kalibrieren",defaultVibrationCali:"Vibrationskalibrierung",defaultVibrationCaliDesc:"Ringing-Artefakte reduzieren",defaultLayerInspect:"Erste-Schicht-Inspektion",defaultLayerInspectDesc:"KI-Inspektion der ersten Schicht",defaultTimelapse:"Zeitraffer",defaultTimelapseDesc:"Zeitraffervideo aufnehmen",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Druckplatte-Bestätigung",requirePlateClear:"Druckplatte-Bestätigung erforderlich",requirePlateClearDescription:'Wenn aktiviert, wartet der Scheduler auf eine Druckplatten-Bestätigung pro Drucker, bevor geplante Drucke auf Druckern mit abgeschlossenen Aufträgen gestartet werden. Wenn dies deaktiviert ist, werden auch das Druckplatten-Status-Badge und die Schaltfläche "Druckplatte als freigegeben markieren" auf den Druckerkarten ausgeblendet.',gcodeInjection:"G-code Injection",gcodeInjectionDescription:'Konfigurieren Sie benutzerdefinierten G-code, der am Anfang und/oder Ende von Drucken für Auto-Print-Systeme wie Farmloop, SwapMod, AutoClear und Printflow 3D eingefügt wird. Snippets werden pro Druckermodell konfiguriert und angewendet, wenn "G-code einfügen" bei einem Warteschlangen-Element aktiviert ist.',gcodeInjectionNoPrinters:"Keine Drucker gefunden. Fügen Sie Drucker hinzu, um G-code-Snippets zu konfigurieren.",gcodeStartLabel:"Start G-code",gcodeEndLabel:"End G-code",gcodeStartPlaceholder:"G-code, der vor dem Druckstart eingefügt wird...",gcodeEndPlaceholder:"G-code, der nach dem Druckende angefügt wird...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Automatische Trocknung",queueDryingDescription:"AMS-Filament automatisch trocknen, wenn der Drucker zwischen Warteschlangen-Drucken im Leerlauf ist. Verwendet den Feuchtigkeitsschwellenwert oben.",queueDryingEnabled:"Automatische Trocknung aktivieren",queueDryingEnabledDescription:"AMS-Trocknung automatisch starten, wenn der Drucker im Leerlauf ist und die Feuchtigkeit über dem Schwellenwert liegt",queueDryingBlock:"Auf Trocknung warten",queueDryingBlockDescription:"Druckwarteschlange blockieren, bis die Trocknung abgeschlossen ist. Wenn aus, haben Drucke Vorrang.",ambientDryingEnabled:"Umgebungstrocknung",ambientDryingEnabledDescription:"Filament auf inaktiven Druckern automatisch trocknen, wenn die Luftfeuchtigkeit den Schwellenwert überschreitet — auch ohne Warteschlange.",dryingPresets:"Trocknungsvoreinstellungen",dryingPresetsDescription:"Temperatur und Dauer pro Filamenttyp. AMS 2 Pro verwendet niedrigere Temperaturen, AMS-HT unterstützt höhere.",dryingFilament:"Filament",printModal:"Druckdialog",expandCustomMapping:"Benutzerdefinierte Zuordnung standardmäßig erweitern",expandCustomMappingDescription:"Bei Druck auf mehrere Drucker die AMS-Zuordnung pro Drucker erweitert anzeigen",authentication:"Authentifizierung",authEnabledDescription:"Ihre Instanz ist mit Benutzerauthentifizierung gesichert",authDisabledDescription:"Aktivieren Sie die Anmeldepflicht und verwalten Sie den Benutzerzugriff",authDisabledMessage:"Aktivieren Sie die Authentifizierung, um Benutzerkonten zu erstellen, Berechtigungen zu verwalten und Ihre Bambuddy-Instanz zu sichern.",enableAuthentication:"Authentifizierung aktivieren",currentUser:"Aktueller Benutzer",changePassword:"Passwort ändern",admin:"Admin",users:"Benutzer",addUser:"Benutzer hinzufügen",groups:"Gruppen",addGroup:"Gruppe hinzufügen",system:"System",noDescription:"Keine Beschreibung",userCount:"{{count}} Benutzer",permissionCount:"{{count}} Berechtigungen",createUser:"Benutzer erstellen",username:"Benutzername",enterUsername:"Benutzername eingeben",password:"Passwort",enterPassword:"Passwort eingeben (min. 6 Zeichen)",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Passwort bestätigen",viewReleaseOnGitHub:"Release auf GitHub anzeigen",turnAllPlugsOn:"Alle Stecker einschalten",turnAllPlugsOff:"Alle Stecker ausschalten",clearNotificationLogs:"Benachrichtigungsprotokolle löschen",clearLogsMessage:"Dadurch werden alle Benachrichtigungsprotokolle, die älter als 30 Tage sind, dauerhaft gelöscht. Diese Aktion kann nicht rückgängig gemacht werden.",clearLogs:"Protokolle löschen",resetUiPreferences:"UI-Einstellungen zurücksetzen",resetUiPreferencesMessage:"Dadurch werden alle UI-Einstellungen auf Standardwerte zurückgesetzt: Seitenleisten-Reihenfolge, Theme, Dashboard-Layout, Ansichtsmodi und Sortiereinstellungen. Ihre Drucker, Archive und Servereinstellungen werden NICHT beeinträchtigt. Die Seite wird nach dem Löschen neu geladen.",resetPreferences:"Einstellungen zurücksetzen",deleteGroupTitle:"Gruppe löschen",deleteGroupMessage:"Möchten Sie diese Gruppe wirklich löschen? Benutzer in dieser Gruppe verlieren diese Berechtigungen.",deleteGroup:"Gruppe löschen",disableAuthenticationTitle:"Authentifizierung deaktivieren",disableAuthenticationMessage:"Möchten Sie die Authentifizierung wirklich deaktivieren? Dadurch wird Ihre Bambuddy-Instanz ohne Anmeldung zugänglich. Alle Benutzer bleiben in der Datenbank, aber die Authentifizierung wird deaktiviert.",disableAuthentication:"Authentifizierung deaktivieren",configureBambuddy:"Bambuddy konfigurieren",systemDefault:"Systemstandard",archiveSettings:"Archiv-Einstellungen",newWindow:"Neues Fenster",embeddedOverlay:"Eingebettetes Overlay",preferredSlicer:"Bevorzugter Slicer",preferredSlicerDescription:"Wähle die Slicer-Anwendung zum Öffnen von Dateien",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev haben bekannte CLI-Bugs, die das Slicen vieler von BambuStudio erstellter 3MF-Dateien blockieren — siehe Upstream-Issues #12426 (Segfault bei bemalten Multi-Extruder-Dateien) und #13386 (zu strikte Parameter-Range-Validierung). Bis die Upstream-Fixes verfügbar sind, wird Bambu Studio empfohlen.",useSlicerApi:"Slicer-API verwenden",useSlicerApiDescription:'Wenn aktiv, öffnen "Slice"-Aktionen das in-App Slicer-Modal und rufen den Slicer-API-Sidecar. Aus (Standard): Übergabe an den Desktop-Slicer per URI-Schema.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer Sidecar-URL",bambuStudioApiUrl:"Bambu Studio Sidecar-URL",slicerApiUrlDescription:"URL des Slicer-API-Sidecar-Containers. Leer lassen, um die SLICER_API_URL- bzw. BAMBU_STUDIO_API_URL-Umgebungsvariablen zu nutzen.",externalCameras:"Externe Kameras",costTracking:"Kostenverfolgung",printsOnly:"Nur Drucke",totalConsumption:"Gesamtverbrauch",dataManagement:"Datenverwaltung",storageUsage:"Speichernutzung",storageUsageDescription:"Aufschlüsselung der Datennutzung nach Kategorie",storageUsageTotal:"Gesamt",storageUsageErrors:"Fehler",storageUsageOtherBreakdown:"Sonstiges (enthält statische Assets, Skripte und Konfigurationsdateien)",storageUsageSystem:"System",storageUsageData:"Daten",storageUsageUnavailable:"Speichernutzungsinformationen nicht verfügbar",clearNotificationLogsDescription:"Benachrichtigungsprotokolle älter als 30 Tage löschen",resetUiPreferencesDescription:"Seitenleisten-Reihenfolge, Theme, Ansichtsmodi und Layout-Einstellungen zurücksetzen. Drucker, Archive und Einstellungen werden nicht beeinflusst.",enableHomeAssistant:"Home Assistant aktivieren",enableMqtt:"MQTT aktivieren",useTls:"TLS verwenden",enableMetricsEndpoint:"Metrik-Endpunkt aktivieren",availableMetrics:"Verfügbare Metriken",editUser:"Benutzer bearbeiten",deleteUserTitle:"Benutzer löschen",groupName:"Gruppenname",leaveEmptyForAnonymous:"Leer lassen für anonym",leaveEmptyForNoAuth:"Leer lassen für keine Authentifizierung",enterNewPassword:"Neues Passwort eingeben",confirmNewPassword:"Neues Passwort bestätigen",enterGroupName:"Gruppenname eingeben",enterDescriptionOptional:"Beschreibung eingeben (optional)",enterCurrentPassword:"Aktuelles Passwort eingeben",enterNewPasswordMin6:"Neues Passwort eingeben (min. 6 Zeichen)",toast:{keyCopied:"Schlüssel in Zwischenablage kopiert",copyFailed:"Schlüssel konnte nicht kopiert werden",keyAddedToBrowser:"Schlüssel zum API-Browser hinzugefügt",clearLogsFailed:"Protokolle konnten nicht gelöscht werden",uiPreferencesReset:"UI-Einstellungen zurückgesetzt. Wird neu geladen...",authDisabled:"Authentifizierung erfolgreich deaktiviert",authDisableFailed:"Authentifizierung konnte nicht deaktiviert werden",apiKeyCreated:"API-Schlüssel erstellt",apiKeyDeleted:"API-Schlüssel gelöscht",userCreated:"Benutzer erfolgreich erstellt",userUpdated:"Benutzer erfolgreich aktualisiert",userDeleted:"Benutzer erfolgreich gelöscht",groupCreated:"Gruppe erfolgreich erstellt",groupUpdated:"Gruppe erfolgreich aktualisiert",groupDeleted:"Gruppe erfolgreich gelöscht",fillRequiredFields:"Bitte füllen Sie alle erforderlichen Felder aus",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein",enterGroupName:"Bitte geben Sie einen Gruppennamen ein",settingsSaved:"Einstellungen gespeichert",noPermissionUpdate:"Sie haben keine Berechtigung, Einstellungen zu ändern",cameraSettingsSaved:"Kamera-Einstellungen gespeichert",enterCameraUrl:"Bitte geben Sie eine Kamera-URL ein",passwordChanged:"Passwort erfolgreich geändert",connectionFailed:"Verbindung fehlgeschlagen",testFailed:"Test fehlgeschlagen",cameraConnected:"Kamera verbunden{{resolution}}"},testConnection:"Verbindung testen",catalog:{spoolCatalog:"Spulenkatalog",spoolCatalogDescription:"Leerspulengewichte nach Marke/Typ. Wird für die automatische Gewichtssuche beim Hinzufügen von Spulen verwendet.",searchCatalog:"Katalog durchsuchen...",addNewEntry:"Neuen Eintrag hinzufügen",namePlaceholder:"Name (z.B. Bambu Lab - Plastik)",weight:"Gewicht",type:"Typ",default:"Standard",custom:"Benutzerdefiniert",noMatch:"Keine Einträge entsprechen Ihrer Suche",empty:"Keine Einträge im Katalog",deleteEntry:"Eintrag löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',resetCatalog:"Katalog zurücksetzen",resetConfirm:"Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Einträge werden entfernt.",loadFailed:"Spulenkatalog konnte nicht geladen werden",nameWeightRequired:"Name und Gewicht sind erforderlich",entryAdded:"Eintrag hinzugefügt",addFailed:"Eintrag konnte nicht hinzugefügt werden",entryUpdated:"Eintrag aktualisiert",updateFailed:"Eintrag konnte nicht aktualisiert werden",entryDeleted:"Eintrag gelöscht",deleteFailed:"Eintrag konnte nicht gelöscht werden",resetSuccess:"Katalog auf Standardwerte zurückgesetzt",resetFailed:"Katalog konnte nicht zurückgesetzt werden",exported:"{{count}} Einträge exportiert",imported:"{{added}} Einträge importiert ({{skipped}} übersprungen)",importFailed:"Import fehlgeschlagen: ungültiges JSON-Format",exportTooltip:"Katalog als JSON exportieren",importTooltip:"Katalog aus JSON importieren",resetTooltip:"Auf Standardwerte zurücksetzen",selectedCount:"{{count}} ausgewählt",deleteSelected:"Ausgewählte löschen",bulkDeleteConfirm:"Möchten Sie {{count}} Einträge wirklich löschen?",bulkDeleted:"{{count}} Einträge gelöscht",bulkDeleteFailed:"Fehler beim Löschen der Einträge"},colorCatalog:{title:"Farbkatalog",description:"Filamentfarben nach Hersteller/Material. Wird für die automatische Farbsuche beim Hinzufügen von Spulen verwendet.",searchColors:"Farben durchsuchen...",allManufacturers:"Alle Hersteller",addNewColor:"Neue Farbe hinzufügen",manufacturer:"Hersteller",colorName:"Farbname",hex:"Hex",materialOptional:"Material (optional)",showing:"{{filtered}} von {{total}} Farben angezeigt",noMatch:"Keine Farben entsprechen Ihrer Suche",empty:"Keine Farben im Katalog",deleteColor:"Farbe löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',resetCatalog:"Farbkatalog zurücksetzen",resetConfirm:"Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Farben werden entfernt.",sync:"Sync",starting:"Starten...",syncTooltip:"Von FilamentColors.xyz synchronisieren (2000+ Farben)",loadFailed:"Farbkatalog konnte nicht geladen werden",fieldsRequired:"Hersteller, Farbname und Hex-Farbe sind erforderlich",colorAdded:"Farbe hinzugefügt",addFailed:"Farbe konnte nicht hinzugefügt werden",colorUpdated:"Farbe aktualisiert",updateFailed:"Farbe konnte nicht aktualisiert werden",colorDeleted:"Farbe gelöscht",deleteFailed:"Farbe konnte nicht gelöscht werden",resetSuccess:"Farbkatalog auf Standardwerte zurückgesetzt",resetFailed:"Katalog konnte nicht zurückgesetzt werden",syncUpToDate:"Bereits aktuell ({{count}} Farben geprüft)",syncComplete:"{{added}} neue Farben hinzugefügt ({{skipped}} bereits vorhanden)",syncError:"Sync-Fehler",syncFailed:"Synchronisierung von FilamentColors.xyz fehlgeschlagen",exported:"{{count}} Farben exportiert",imported:"{{added}} Farben importiert ({{skipped}} übersprungen)",importFailed:"Import fehlgeschlagen: ungültiges JSON-Format",selectedCount:"{{count}} ausgewählt",deleteSelected:"Ausgewählte löschen",bulkDeleteConfirm:"Möchten Sie {{count}} Farben wirklich löschen?",bulkDeleted:"{{count}} Farben gelöscht",bulkDeleteFailed:"Fehler beim Löschen der Farben"},dateFormat:"Datumsformat",dateFormatUs:"US (MM/TT/JJJJ)",dateFormatEu:"EU (TT/MM/JJJJ)",dateFormatIso:"ISO (JJJJ-MM-TT)",timeFormat:"Zeitformat",timeFormat12:"12-Stunden (3:30 PM)",timeFormat24:"24-Stunden (15:30)",defaultPrinter:"Standarddrucker",defaultPrinterDescription:"Diesen Drucker für Uploads, Nachdrucke und andere Vorgänge vorauswählen.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Elemente in der Seitenleiste per Drag & Drop neu anordnen. Hier auf Standardreihenfolge zurücksetzen.",setDefault:"Standard setzen",sidebarOrderSetDefaultHint:"Standard setzen übernimmt die aktuelle Menüreihenfolge für Benutzer, die ihre noch nicht angepasst haben.",sidebarDefaultSet:"Standard-Menüreihenfolge wurde festgelegt.",sidebarDefaultCleared:"Standard-Menüreihenfolge gelöscht.",sidebarDefaultFailed:"Festlegen der Standard-Menüreihenfolge fehlgeschlagen.",reset:"Zurücksetzen",darkMode:"Dunkelmodus",lightMode:"Hellmodus",active:"(aktiv)",background:"Hintergrund",accent:"Akzent",style:"Stil",bgNeutral:"Neutral",bgWarm:"Warm",bgCool:"Kühl",bgOled:"OLED Schwarz",bgSlate:"Schieferblau",bgForest:"Waldgrün",accentGreen:"Grün",accentTeal:"Türkis",accentBlue:"Blau",accentOrange:"Orange",accentPurple:"Lila",accentRed:"Rot",styleClassic:"Klassisch",styleGlow:"Leuchtend",styleVibrant:"Lebendig",themeToggleHint:"Zwischen Hell- und Dunkelmodus mit dem Sonnen-/Mondsymbol in der Seitenleiste wechseln.",autoArchivePrints:"Drucke automatisch archivieren",autoArchiveDescription:"3MF-Dateien automatisch speichern, wenn Drucke abgeschlossen sind",saveThumbnailsDescription:"Vorschaubilder aus 3MF-Dateien extrahieren und speichern",captureFinishPhotoDescription:"Foto von der Druckerkamera aufnehmen, wenn der Druck abgeschlossen ist",ffmpegNotInstalled:"ffmpeg nicht installiert",ffmpegRequired:"Kameraaufnahme benötigt ffmpeg. Installieren über <brew>brew install ffmpeg</brew> (macOS) oder <apt>apt install ffmpeg</apt> (Linux).",camera:"Kamera",cameraViewMode:"Kamera-Ansichtsmodus",cameraOverlayDescription:"Kamera öffnet sich als größenveränderbares Overlay auf dem Hauptbildschirm",cameraWindowDescription:"Kamera öffnet sich in einem separaten Browserfenster",externalCamerasDescription:"Externe Kameras konfigurieren, um die eingebaute Druckerkamera zu ersetzen. Unterstützt MJPEG-Streams, RTSP, HTTP-Snapshots und USB-Kameras (V4L2). Wenn aktiviert, wird die externe Kamera für Live-Ansicht und Abschlussfotos verwendet.",cameraPlaceholderUsb:"Gerätepfad (/dev/video0)",cameraPlaceholderUrl:"Kamera-URL (rtsp://... oder http://...)",cameraTypeMjpeg:"MJPEG-Stream",cameraTypeRtsp:"RTSP-Stream",cameraTypeSnapshot:"HTTP-Snapshot",cameraTypeUsb:"USB-Kamera (V4L2)",cameraRotation:"Drehung",test:"Testen",connected:"Verbunden",disconnected:"Getrennt",currency:"Währung",defaultFilamentCost:"Standard-Filamentkosten (pro kg)",electricityCost:"Stromkosten pro kWh",energyDisplayMode:"Energieanzeige-Modus",energyModePrintDescription:"Dashboard zeigt Summe der während Drucken verbrauchten Energie",energyModeTotalDescription:"Dashboard zeigt Gesamtenergie der Smart Plugs",fileManager:"Dateimanager",createArchiveEntry:"Archiveintrag beim Drucken erstellen",createArchiveEntryDescription:"Beim Drucken aus dem Dateimanager optional einen Archiveintrag erstellen",lowDiskSpaceWarning:"Warnung bei wenig Speicherplatz",lowDiskSpaceDescription:"Warnung anzeigen, wenn freier Speicherplatz unter diesen Schwellenwert fällt",printerFirmware:"Drucker-Firmware",checkFirmwareDescription:"Nach Firmware-Updates von Bambu Lab suchen",bambuddySoftware:"Bambuddy Software",autoCheckDescription:"Automatisch beim Start nach neuen Versionen suchen",checkNow:"Jetzt prüfen",updateAvailableVersion:"Update verfügbar: v{{version}}",releaseNotes:"Versionshinweise",updateViaDocker:"Update über Docker Compose:",installUpdate:"Update installieren",latestVersionRunning:"Sie verwenden die neueste Version",failedToCheckUpdates:"Update-Prüfung fehlgeschlagen: {{error}}",backupRestore:"Sicherung & Wiederherstellung",backupRestoreDescription:"Einstellungen exportieren/importieren und GitHub-Backup konfigurieren",goToBackup:"Zur Sicherung",externalUrl:"Externe URL",externalUrlDescription:"Die externe URL, unter der Bambuddy erreichbar ist. Wird für Benachrichtigungsbilder und externe Integrationen verwendet.",bambuddyUrl:"Bambuddy-URL",externalUrlHint:"Protokoll und Port angeben (z.B. http://192.168.1.100:8000)",ftpRetry:"FTP-Wiederholung",ftpRetryDescription:"FTP-Operationen bei unzuverlässigem Drucker-WLAN wiederholen. Gilt für 3MF-Downloads, Druck-Uploads, Zeitraffer-Downloads und Firmware-Updates.",autoRetryDescription:"Fehlgeschlagene FTP-Operationen automatisch wiederholen",retryAttempts:"Wiederholungsversuche",retryDelay:"Wiederholungsverzögerung",connectionTimeout:"Verbindungs-Timeout",time_one:"{{count}} Mal",time_other:"{{count}} Mal",second_one:"{{count}} Sekunde",second_other:"{{count}} Sekunden",nSeconds:"{{count}} Sekunden",increaseForWeakWifi:"Erhöhen für Drucker mit schwachem WLAN",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Mit Home Assistant verbinden, um Smart Plugs über die HA REST-API zu steuern. Unterstützt Switch-, Light-, Input_Boolean- und Script-Entitäten.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Langlebiges Zugriffstoken",haTokenHint:"Token in HA erstellen: Profil → Langlebige Zugriffstoken → Token erstellen",connectionSuccessful:"Verbindung erfolgreich",connectionFailed:"Verbindung fehlgeschlagen",haConnectionSuccess:"Erfolgreich mit Home Assistant verbunden.",haConnectionFailed:"Verbindung zu Home Assistant fehlgeschlagen.",mqttPublishing:"MQTT-Veröffentlichung",mqttDescription:"BamBuddy-Ereignisse an einen externen MQTT-Broker zur Integration mit Node-RED, Home Assistant und anderen Automatisierungssystemen veröffentlichen.",mqttEnableDescription:"Ereignisse an externen MQTT-Broker veröffentlichen",brokerHostname:"Broker-Hostname",port:"Port",usernameOptional:"Benutzername (optional)",passwordOptional:"Passwort (optional)",topicPrefix:"Topic-Präfix",topicPrefixHint:"Topics werden sein: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Prometheus-Metriken",prometheusEndpointDescription:"Druckermetriken unter <code>/api/v1/metrics</code> für Prometheus/Grafana-Überwachung bereitstellen.",bearerTokenOptional:"Bearer-Token (optional)",bearerTokenHint:"Wenn gesetzt, müssen Anfragen <code>Authorization: Bearer <token></code> enthalten",metricsConnectionStatus:"Verbindungsstatus",metricsPrinterState:"Druckerstatus (idle/printing/etc)",metricsPrintProgress:"Druckfortschritt 0-100%",metricsBedTemp:"Betttemperatur",metricsNozzleTemp:"Düsentemperatur",metricsPrintsTotal:"Gesamtdrucke nach Ergebnis",metricsMore:"...und mehr (Schichten, Lüfter, Warteschlange, Filamentverbrauch)",smartPlugsDescription:"Smart Plugs (Tasmota oder Home Assistant) verbinden, um Stromsteuerung zu automatisieren und Energieverbrauch für Ihre Drucker zu verfolgen.",allOn:"Alle Ein",allOff:"Alle Aus",addSmartPlug:"Smart Plug hinzufügen",energySummary:"Energieübersicht",currentPower:"Aktuelle Leistung",plugsOnline:"{{reachable}}/{{total}} Plugs online",today:"Heute",yesterday:"Gestern",total:"Gesamt",enablePlugsForSummary:"Plugs aktivieren, um Energieübersicht zu sehen",addNotificationProvider:"Hinzufügen",systemBadge:"(System)",creating:"Erstellen...",changing:"Ändern...",deleteUserAndItems:"Benutzer UND dessen Elemente löschen",deleteUserKeepItems:"Benutzer löschen, Elemente behalten (werden herrenlos)",ok:"OK",twoFa:{totpTitle:"Authenticator-App (TOTP)",totpDesc:"Verwende eine Authenticator-App wie Google Authenticator, Aegis oder Authy.",emailOtpTitle:"E-Mail OTP",emailOtpDesc:"Sende einen Einmalcode an {{email}} beim Einloggen.",emailOtpNoEmail:"Füge eine E-Mail-Adresse zu deinem Konto hinzu, um diese Methode zu aktivieren.",addEmailFirst:"Dein Konto hat keine E-Mail-Adresse. Bitte einen Administrator, eine hinzuzufügen.",setupTotp:"Authenticator-App einrichten",setupAuthApp:"Authenticator-App einrichten",setupInstructions:"Scanne den QR-Code mit deiner Authenticator-App und bestätige mit einem Code.",manualEntry:"Kein Scanner? Gib dieses Secret manuell ein:",scannedContinue:"Code gescannt — weiter",enterCodeToConfirm:"Gib den 6-stelligen Code aus deiner Authenticator-App ein, um die Einrichtung zu bestätigen.",activate:"Aktivieren",disableTotp:"Authenticator deaktivieren",disableConfirmHint:"Gib einen gültigen TOTP-Code oder einen Backup-Code ein, um den Authenticator zu deaktivieren.",totpDisabled:"Authenticator-App deaktiviert.",emailOtpEnabled:"E-Mail OTP aktiviert.",emailOtpDisabled:"E-Mail OTP deaktiviert.",smtpRequired:"Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen.",invalidCode:"Ungültiger Code. Bitte erneut versuchen.",enableEmailOtp:"E-Mail OTP aktivieren",disableEmailOtp:"E-Mail OTP deaktivieren",emailSetupEnterCode:"Ein Bestätigungscode wurde an Ihre E-Mail-Adresse gesendet. Geben Sie ihn unten ein, um zu bestätigen, dass Ihnen dieses Postfach gehört.",verifyAndEnable:"Verifizieren & Aktivieren",emailDisablePasswordHint:"Geben Sie Ihr Kontopasswort ein, um die Deaktivierung des E-Mail OTP zu bestätigen.",passwordPlaceholder:"Passwort eingeben",backupCodesTitle:"Backup-Codes sichern",backupCodesWarning:"Speichere diese Codes sicher. Jeder Code kann nur einmal verwendet werden und wird nicht erneut angezeigt.",backupCodesRemaining:"{{count}} Backup-Codes verbleibend",savedCodes:"Codes gespeichert",regenBackup:"Backup-Codes neu generieren",regenBackupHint:"Gib deinen aktuellen TOTP-Code ein, um 10 neue Backup-Codes zu generieren. Alle bestehenden Codes werden ungültig.",newBackupCodes:"Neue Backup-Codes",linkedAccounts:"Verknüpfte SSO-Konten",linkedAccountsDesc:"Diese externen Identitätsanbieter sind mit deinem Konto verknüpft.",oidcUnlinked:"Konto getrennt."},oidc:{title:"SSO / OIDC-Anbieter",desc:"Konfiguriere OpenID Connect-Anbieter für Single Sign-On.",addProvider:"Anbieter hinzufügen",newProvider:"Neuer Anbieter",empty:"Noch keine OIDC-Anbieter konfiguriert.",created:"Anbieter erstellt.",updated:"Anbieter aktualisiert.",deleted:"Anbieter gelöscht.",deleteTitle:"Anbieter löschen",deleteMessage:'"{{name}}" löschen? Alle verknüpften Benutzerkonten werden getrennt.',form:{name:"Anzeigename",issuerUrl:"Aussteller-URL",clientId:"Client-ID",clientSecret:"Client-Secret",scopes:"Scopes",iconUrl:"Symbol-URL (optional)",enabled:"Aktiviert",autoCreate:"Benutzer automatisch anlegen",autoCreateDesc:"Erstellt beim ersten Login automatisch ein lokales Konto.",autoLink:"Bestehende Konten automatisch verknüpfen",autoLinkDesc:"Verknüpft beim ersten Login vorhandene lokale Konten anhand der E-Mail-Adresse.",secretHint:"leer lassen zum Beibehalten",secretPlaceholder:"neues Secret",emailClaim:"E-Mail-Claim",emailClaimDesc:"JWT-Claim für die E-Mail-Identität. Für Azure Entra ID 'preferred_username' oder 'upn' verwenden (sendet kein email_verified). Nur vertrauenswürdige Claim-Namen verwenden.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Benutzerdefinierte Claims sind für die Auto-Verknüpfung nur sicher, wenn der Wert vom Mandanten verwaltet wird (z. B. Azure Entra ID upn / preferred_username). Aktiviere Auto-Verknüpfung nicht, wenn dein IdP Benutzern erlaubt, diesen Claim selbst zu setzen.",requireEmailVerified:"E-Mail-Verifizierung erforderlich",requireEmailVerifiedDesc:"E-Mail-Claim nur akzeptieren, wenn der Provider ihn als verifiziert markiert.",requireEmailVerifiedWarning:"Warnung: E-Mail wird auch ohne Verifizierung akzeptiert. Nur bei vertrauenswürdigen Providern verwenden.",requireEmailVerifiedAutoLink:"Auto-Verknüpfung zuerst deaktivieren, um diese Einstellung zu ändern."}}},notification:{printStarted:{title:"Druck gestartet",body:"{{printer}}: {{filename}} wird gedruckt"},printCompleted:{title:"Druck abgeschlossen",body:"{{printer}}: {{filename}} erfolgreich abgeschlossen"},printFailed:{title:"Druck fehlgeschlagen",body:"{{printer}}: {{filename}} ist fehlgeschlagen"},printStopped:{title:"Druck gestoppt",body:"{{printer}}: {{filename}} wurde gestoppt"},printProgress:{title:"Druckfortschritt",body:"{{printer}}: {{filename}} ist zu {{percent}}% abgeschlossen"},printerOffline:{title:"Drucker offline",body:"{{printer}} ist offline"},printerError:{title:"Druckerfehler",body:"{{printer}}: {{error}}"},filamentLow:{title:"Filament niedrig",body:"{{printer}}: Filament geht zur Neige"},maintenanceDue:{title:"Wartung fällig",body:"{{printer}}: {{items}} benötigen Aufmerksamkeit"}},errors:{generic:"Etwas ist schiefgelaufen",networkError:"Netzwerkfehler. Bitte überprüfen Sie Ihre Verbindung.",notFound:"Nicht gefunden",unauthorized:"Nicht autorisiert",serverError:"Serverfehler",validationError:"Bitte überprüfen Sie Ihre Eingabe",printerConnectionFailed:"Verbindung zum Drucker fehlgeschlagen",saveFailed:"Speichern fehlgeschlagen",deleteFailed:"Löschen fehlgeschlagen",loadFailed:"Laden der Daten fehlgeschlagen"},hmsErrors:{title:"Fehler - {{name}}",noErrors:"Keine Fehler",viewOnWiki:"Im Bambu Lab Wiki ansehen",clearInstructions:"Löschen Sie die Fehler am Drucker, um sie hier zu entfernen.",clearErrors:"Fehler löschen",clearSuccess:"HMS-Fehler gelöscht",clearFailed:"HMS-Fehler konnten nicht gelöscht werden"},mqttDebug:{title:"MQTT-Debug-Protokoll",searchPlaceholder:"Topic oder Payload suchen...",noMessages:"Noch keine Nachrichten protokolliert",startLoggingHint:'Klicken Sie auf "Protokollierung starten", um MQTT-Nachrichten aufzuzeichnen',noMessagesMatch:"Keine Nachrichten entsprechen Ihrem Filter",adjustFilterHint:"Versuchen Sie, Ihre Such- oder Filterkriterien anzupassen",incoming:"Eingehend",outgoing:"Ausgehend",loggingStopped:"Protokollierung gestoppt",loggingActive:"Protokollierung aktiv - Nachrichten werden automatisch aktualisiert",startLogging:"Protokollierung starten",stopLogging:"Protokollierung stoppen",clearLog:"Protokoll löschen",topic:"Topic",timestamp:"Zeitstempel",direction:"Richtung",all:"Alle"},printerFiles:{title:"Dateimanager",storageUsed:"Belegt:",storageFree:"Frei:",filterPlaceholder:"Dateien filtern...",deleteButton:"Löschen",deleteFiles:"{{count}} Dateien löschen",deleteFileConfirm:'"{{name}}" löschen? Dies kann nicht rückgängig gemacht werden.',deleteFilesConfirm:"{{count}} ausgewählte Dateien löschen? Dies kann nicht rückgängig gemacht werden.",noFiles:"Keine Dateien auf dem Drucker",loadingFiles:"Dateien werden geladen...",failedToLoad:"Dateien konnten nicht geladen werden",toast:{filesDeleted:"{{count}} Datei(en) gelöscht",deleteFailed:"Löschen fehlgeschlagen: {{error}}"}},confirm:{delete:"Möchten Sie dies wirklich löschen?",unsavedChanges:"Sie haben ungespeicherte Änderungen. Möchten Sie wirklich verlassen?",clearQueue:"Möchten Sie die Warteschlange wirklich leeren?"},login:{title:"Bambuddy Anmeldung",subtitle:"Melden Sie sich bei Ihrem Konto an",username:"Benutzername",usernamePlaceholder:"Benutzername eingeben",usernameOrEmail:"Benutzername oder E-Mail",usernameOrEmailPlaceholder:"Benutzername oder @ E-Mail",password:"Passwort",passwordPlaceholder:"Passwort eingeben",signIn:"Anmelden",signingIn:"Anmeldung läuft...",rememberMe:"Angemeldet bleiben",forgotPassword:"Passwort vergessen?",loginSuccess:"Erfolgreich angemeldet",loginFailed:"Anmeldung fehlgeschlagen",enterCredentials:"Bitte Benutzername und Passwort eingeben",enterEmail:"Bitte geben Sie Ihre E-Mail-Adresse ein",oidcLoginFailed:"OIDC-Anmeldung fehlgeschlagen",oidcErrors:{providerError:"Der Identity-Provider hat einen Fehler zurückgegeben",missingParameters:"Dem OIDC-Callback fehlen erforderliche Parameter",invalidState:"OIDC-State ist ungültig oder wurde bereits verwendet",stateExpired:"OIDC-Sitzung abgelaufen — bitte erneut versuchen",providerNotFound:"OIDC-Provider nicht gefunden",discoveryFailed:"OIDC-Discovery-Dokument konnte nicht abgerufen werden",invalidDiscovery:"OIDC-Discovery-Dokument ist ungültig",networkError:"Netzwerkfehler beim OIDC-Token-Austausch",badResponse:"Unerwartete Antwort beim OIDC-Token-Austausch",noIdToken:"OIDC-Provider hat kein ID-Token zurückgegeben",validationFailed:"OIDC-Token-Validierung fehlgeschlagen",nonceMismatch:"OIDC-Nonce stimmt nicht überein — möglicher Replay-Angriff",missingSubClaim:"OIDC-Token enthält keinen Sub-Claim",noLinkedAccount:"Kein lokales Konto mit dieser OIDC-Identität verknüpft",accountInactive:"Ihr Konto ist inaktiv",userResolutionFailed:"Ihr Konto konnte nicht aufgelöst werden",internalError:"Interner Fehler beim OIDC-Login",tokenExchangeFailed:"OIDC-Token-Austausch fehlgeschlagen"},forgotPasswordTitle:"Passwort vergessen",forgotPasswordMessage:"Wenn Sie Ihr Passwort vergessen haben, wenden Sie sich bitte an Ihren Systemadministrator.",forgotPasswordEmailMessage:"Geben Sie Ihre E-Mail-Adresse ein und wir senden Ihnen ein neues Passwort.",emailAddress:"E-Mail-Adresse",emailPlaceholder:"ihre.email@beispiel.de",cancel:"Abbrechen",sending:"Wird gesendet...",sendResetEmail:"Zurücksetzungs-E-Mail senden",howToReset:"So setzen Sie Ihr Passwort zurück:",resetStep1:"Kontaktieren Sie Ihren Bambuddy-Administrator",resetStep2:"Bitten Sie ihn, Ihr Passwort in der Benutzerverwaltung zurückzusetzen",resetStep3:"Er kann ein neues temporäres Passwort für Sie festlegen",resetStep4:"Melden Sie sich mit dem neuen Passwort an und ändern Sie es in den Einstellungen",gotIt:"Verstanden",resetPassword:{title:"Neues Passwort festlegen",subtitle:"Geben Sie unten Ihr neues Passwort ein und bestätigen Sie es.",newPassword:"Neues Passwort",newPasswordPlaceholder:"Mindestens 8 Zeichen",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Neues Passwort wiederholen",saving:"Wird gespeichert…",submit:"Neues Passwort festlegen",backToLogin:"Zurück zur Anmeldung",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 8 Zeichen lang sein",resetFailed:"Passwort zurücksetzen fehlgeschlagen. Der Link ist möglicherweise abgelaufen."},twoFA:{title:"Zwei-Faktor-Authentifizierung",subtitle:"Ihr Konto ist mit 2FA geschützt. Geben Sie unten den Bestätigungscode ein.",methodAuthenticator:"Authenticator-App",methodEmail:"E-Mail-Code",methodBackup:"Wiederherstellungscode",instructionsTotp:"Öffnen Sie Ihre Authenticator-App und geben Sie den 6-stelligen Code für Bambuddy ein.",instructionsEmail:"Ein 6-stelliger Code wurde an Ihre E-Mail-Adresse gesendet. Er ist 10 Minuten gültig.",instructionsEmailNotSent:"Klicken Sie unten, um einen Bestätigungscode per E-Mail zu erhalten.",instructionsBackup:"Geben Sie einen Ihrer 8-stelligen Wiederherstellungscodes ein. Jeder Code kann nur einmal verwendet werden.",sendCodeButton:"Code per E-Mail senden",sendingCode:"Wird gesendet...",resendCode:"Code erneut senden",codeLabel:"Bestätigungscode",backupCodeLabel:"Wiederherstellungscode",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Bestätigen",verifyingButton:"Wird überprüft...",backToLogin:"← Zurück zur Anmeldung",orContinueWith:"oder anmelden mit",signInWith:"Anmelden mit {{provider}}",enterCode:"Bitte geben Sie den Bestätigungscode ein",sendCodeFailed:"Bestätigungscode konnte nicht gesendet werden",invalidCode:"Ungültiger Code. Bitte erneut versuchen."}},setup:{title:"Bambuddy Einrichtung",subtitle:"Konfigurieren Sie die Authentifizierung für Ihre Bambuddy-Instanz",enableAuth:"Authentifizierung aktivieren",adminAccount:"Admin-Konto",adminAccountDesc:"Wenn bereits Admin-Benutzer existieren, wird die Authentifizierung mit den vorhandenen Admin-Konten aktiviert. Lassen Sie die Felder unten leer, um vorhandene Admins zu verwenden, oder geben Sie neue Anmeldedaten ein, um einen neuen Admin-Benutzer zu erstellen.",adminUsername:"Admin-Benutzername",adminPassword:"Admin-Passwort",optionalIfAdminExists:"(optional, wenn Admin-Benutzer existieren)",adminUsernamePlaceholder:"Admin-Benutzernamen eingeben (optional)",adminPasswordPlaceholder:"Admin-Passwort eingeben (optional)",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Admin-Passwort bestätigen",settingUp:"Einrichtung läuft...",completeSetup:"Einrichtung abschließen",toast:{authEnabledAdminCreated:"Authentifizierung aktiviert und Admin-Benutzer erstellt",authEnabledExistingAdmins:"Authentifizierung mit vorhandenen Admin-Benutzern aktiviert",setupCompleted:"Einrichtung abgeschlossen",enterBothCredentials:"Bitte geben Sie sowohl Admin-Benutzernamen als auch Passwort ein, oder lassen Sie beide leer, um vorhandene Admin-Benutzer zu verwenden",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein"}},changePassword:{title:"Passwort ändern",currentPassword:"Aktuelles Passwort",currentPasswordPlaceholder:"Aktuelles Passwort eingeben",newPassword:"Neues Passwort",newPasswordPlaceholder:"Neues Passwort eingeben (min. 6 Zeichen)",confirmPassword:"Neues Passwort bestätigen",confirmPasswordPlaceholder:"Neues Passwort bestätigen",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein",changing:"Wird geändert...",success:"Passwort erfolgreich geändert",failed:"Passwortänderung fehlgeschlagen"},plateAlert:{title:"Druck pausiert!",message:"Objekte auf dem Druckbett erkannt. Der Druck wurde automatisch pausiert. Bitte räumen Sie das Druckbett und setzen Sie den Druck fort.",understand:"Verstanden"},camera:{title:"Kameraansicht",invalidPrinterId:"Ungültige Drucker-ID",live:"Live",snapshot:"Schnappschuss",restartStream:"Stream neu starten",refreshSnapshot:"Schnappschuss aktualisieren",fullscreen:"Vollbild",exitFullscreen:"Vollbild beenden",connectingToCamera:"Verbinde mit Kamera...",capturingSnapshot:"Schnappschuss wird aufgenommen...",connectionLost:"Verbindung verloren",connectionFailed:"Kameraverbindung fehlgeschlagen",reconnecting:"Neuverbindung in {{countdown}}s... (Versuch {{attempt}}/{{max}})",reconnectNow:"Jetzt verbinden",cameraUnavailable:"Kamera nicht verfügbar",cameraUnavailableDesc:"Stellen Sie sicher, dass der Drucker eingeschaltet und verbunden ist.",noCamera:"Keine Kamera verfügbar",retry:"Erneut versuchen",cameraStream:"Kamera-Stream",zoomOut:"Verkleinern",zoomIn:"Vergrößern",resetZoom:"Zoom zurücksetzen",recording:"Aufnahme",startRecording:"Aufnahme starten",stopRecording:"Aufnahme stoppen",chamberLight:"Kammerbeleuchtung umschalten"},groups:{title:"Gruppenverwaltung",subtitle:"Berechtigungsgruppen für Zugriffskontrolle verwalten",backToSettings:"Zurück zu Einstellungen",createGroup:"Gruppe erstellen",noPermission:"Sie haben keine Berechtigung, auf diese Seite zuzugreifen.",system:"System",noDescription:"Keine Beschreibung",usersCount:"{{count}} Benutzer",permissionsCount:"{{count}} Berechtigungen",edit:"Bearbeiten",delete:"Löschen",toast:{created:"Gruppe erfolgreich erstellt",updated:"Gruppe erfolgreich aktualisiert",deleted:"Gruppe erfolgreich gelöscht",enterGroupName:"Bitte geben Sie einen Gruppennamen ein"},modal:{editGroup:"Gruppe bearbeiten",createGroup:"Gruppe erstellen",cancel:"Abbrechen",saving:"Speichern...",creating:"Erstellen...",saveChanges:"Änderungen speichern"},form:{groupName:"Gruppenname",groupNamePlaceholder:"Gruppennamen eingeben",systemGroupWarning:"Systemgruppennamen können nicht geändert werden",description:"Beschreibung",descriptionPlaceholder:"Beschreibung eingeben (optional)",permissions:"Berechtigungen ({{count}} ausgewählt)"},deleteModal:{title:"Gruppe löschen",message:"Sind Sie sicher, dass Sie diese Gruppe löschen möchten? Benutzer in dieser Gruppe verlieren diese Berechtigungen.",confirm:"Gruppe löschen"},editor:{title:"Gruppe bearbeiten",createTitle:"Gruppe erstellen",search:"Berechtigungen suchen...",selectAll:"Alle auswählen",clearAll:"Alle abwählen",permissionsSelected:"{{count}} ausgewählt",noResults:"Keine Berechtigungen entsprechen Ihrer Suche"}},users:{title:"Benutzerverwaltung",subtitle:"Benutzer und deren Zugriff auf Ihre Bambuddy-Instanz verwalten",backToSettings:"Zurück zu Einstellungen",createUser:"Benutzer erstellen",noPermission:"Sie haben keine Berechtigung, auf diese Seite zuzugreifen.",admin:"Admin",noGroups:"Keine Gruppen",active:"Aktiv",inactive:"Inaktiv",edit:"Bearbeiten",delete:"Löschen",system:"System",noGroupsAvailable:"Keine Gruppen verfügbar",table:{username:"Benutzername",groups:"Gruppen",status:"Status",actions:"Aktionen"},toast:{created:"Benutzer erfolgreich erstellt",updated:"Benutzer erfolgreich aktualisiert",deleted:"Benutzer erfolgreich gelöscht",fillRequired:"Bitte füllen Sie alle Pflichtfelder aus",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein"},modal:{createUser:"Benutzer erstellen",editUser:"Benutzer bearbeiten",cancel:"Abbrechen",creating:"Erstellen...",saving:"Speichern...",saveChanges:"Änderungen speichern",advancedAuthSubtitle:"mit erweiterter Authentifizierung"},form:{username:"Benutzername",usernamePlaceholder:"Benutzernamen eingeben",email:"E-Mail",emailPlaceholder:"benutzer@beispiel.de",password:"Passwort",passwordPlaceholder:"Passwort eingeben",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Passwort bestätigen",newPasswordPlaceholder:"Neues Passwort eingeben",confirmNewPasswordPlaceholder:"Neues Passwort bestätigen",leaveBlankToKeep:"leer lassen, um das aktuelle zu behalten",groups:"Gruppen",optional:"optional",autoGeneratedPassword:"Ein sicheres Passwort wird automatisch generiert und per E-Mail an den Benutzer gesendet.",passwordManagedByAdvancedAuth:'Das Passwort wird durch erweiterte Authentifizierung verwaltet. Verwenden Sie "Passwort zurücksetzen", um ein neues Passwort per E-Mail an den Benutzer zu senden.',resetPassword:"Passwort zurücksetzen",resettingPassword:"Passwort wird zurückgesetzt..."},deleteModal:{title:"Benutzer löschen",message:"Sind Sie sicher, dass Sie diesen Benutzer löschen möchten? Diese Aktion kann nicht rückgängig gemacht werden.",confirm:"Benutzer löschen"}},streamOverlay:{title:"Stream-Overlay",invalidPrinterId:"Ungültige Drucker-ID",cameraStream:"Kamera-Stream",progress:"Fortschritt",eta:"ETA",printerIdle:"Drucker ist inaktiv",printerOffline:"Drucker offline",status:{printing:"Druckt",paused:"Pausiert",finished:"Fertig",failed:"Fehlgeschlagen",idle:"Inaktiv",unknown:"Unbekannt"}},profiles:{title:"Profile",subtitle:"Verwalten Sie Ihre Slicer-Voreinstellungen und Druckvorschub-Kalibrierungen",tabs:{cloud:"Cloud-Profile",local:"Lokale Profile",kprofiles:"K-Profile"},localProfiles:{title:"Lokale Profile",subtitle:"Slicer-Voreinstellungen aus OrcaSlicer importieren und verwalten",import:"Profile importieren",importDesc:".bbscfg-, .bbsflmt-, .orca_filament-, .zip- oder .json-Dateien hier ablegen",importing:"Importiere...",search:"Lokale Voreinstellungen durchsuchen...",noPresets:"Noch keine lokalen Voreinstellungen",badge:"Lokal",edit:"Bearbeiten",delete:"Löschen",cancel:"Abbrechen",deleteConfirmTitle:"Voreinstellung löschen",deleteConfirm:"Möchten Sie diese Voreinstellung wirklich löschen? Dies kann nicht rückgängig gemacht werden.",source:"Quelle",inheritsFrom:"Erbt von",filamentType:"Typ",vendor:"Hersteller",compatiblePrinters:"Drucker",nozzleTemp:"Düsentemperatur",cost:"Kosten",density:"Dichte",pressureAdvance:"Druckvorschub",filament:"Filament",process:"Prozess",printer:"Drucker",toast:{importSuccess:"{{count}} Voreinstellung(en) importiert",importSkipped:"{{count}} Voreinstellung(en) übersprungen (Duplikate)",importError:"{{count}} Fehler beim Import",deleted:"Voreinstellung gelöscht",updated:"Voreinstellung aktualisiert"}},connectedAs:"Verbunden als",logout:"Abmelden",noLogoutPermission:"Sie haben keine Berechtigung zum Abmelden",failedToLoad:"Profile konnten nicht geladen werden",retry:"Erneut versuchen",time:{justNow:"Gerade eben",minsAgo:"vor {{count}}m",hoursAgo:"vor {{count}}h",daysAgo:"vor {{count}}d"},toast:{loggedOut:"Abgemeldet"},login:{title:"Mit Bambu Cloud verbinden",subtitle:"Synchronisieren Sie Ihre Slicer-Voreinstellungen geräteübergreifend",email:"E-Mail",password:"Passwort",region:"Region",regionGlobal:"Global",regionChina:"China",verificationCode:"Bestätigungscode",totpCode:"Authenticator-Code",checkEmail:"Prüfen Sie Ihre E-Mail ({{email}}) für einen 6-stelligen Code",enterTotpHint:"Geben Sie den 6-stelligen Code aus Ihrer Authenticator-App ein",accessToken:"Zugriffstoken",accessTokenHint:"Fügen Sie Ihr Bambu Lab Zugriffstoken ein (aus Bambu Studio)",back:"Zurück",loginButton:"Anmelden",verifyButton:"Bestätigen",setTokenButton:"Token setzen",useToken:"Stattdessen Zugriffstoken verwenden",useEmail:"Stattdessen mit E-Mail anmelden",toast:{loggedIn:"Erfolgreich angemeldet",codeSent:"Bestätigungscode an Ihre E-Mail gesendet",enterTotp:"Geben Sie den Code aus Ihrer Authenticator-App ein",tokenSet:"Token erfolgreich gesetzt"}},presets:{myPreset:"Mein Profil (bearbeitbar)",duplicate:"Duplizieren",editable:"Bearbeitbar",failedToLoadDetails:"Profil-Details konnten nicht geladen werden",deleteConfirm:"Dieses Profil löschen?",deleteWarning:'"{{name}}" wird dauerhaft aus Bambu Cloud gelöscht. Dies kann nicht rückgängig gemacht werden.',noDuplicatePermission:"Sie haben keine Berechtigung zum Duplizieren von Profilen",noEditPermission:"Sie haben keine Berechtigung zum Bearbeiten von Profilen",noDeletePermission:"Sie haben keine Berechtigung zum Löschen von Profilen",types:{filament:"Filament-Profil",printer:"Drucker-Profil",process:"Prozess-Profil"},toast:{deleted:"Profil gelöscht",created:"Profil erstellt",updated:"Profil aktualisiert",duplicated:"Profil dupliziert",fieldAdded:'Feld "{{key}}" hinzugefügt',exported:"Profil exportiert"},baseLabel:"Basis: {{name}}",currentLabel:"Aktuell: {{name}}",newPreset:"Neues Profil",editPreset:"Profil bearbeiten",duplicatePreset:"Profil duplizieren",createNewPreset:"Neues Profil erstellen",customizeSettings:"Passen Sie die Einstellungen für Ihr neues Profil an",compareWithBase:"Mit Basis-Profil vergleichen",compare:"Vergleichen",basePreset:"Basis-Profil",selectBasePreset:"Basis-Profil auswählen...",presetName:"Profilname",myCustomPreset:"Mein eigenes Profil",inheritsFrom:"Erbt von",dropJsonToImport:"JSON zum Importieren ablegen",tabs:{common:"Allgemein",allFields:"Alle Felder"},availableFields:"Verfügbare Felder",searchFieldsPlaceholder:"Felder suchen...",noMatchingFields:"Keine passenden Felder",allFieldsAdded:"Alle Felder hinzugefügt",addCustomField:"Eigenes Feld hinzufügen",yourOverrides:"Ihre Überschreibungen",noOverridesYet:"Noch keine Überschreibungen",clickFieldsToAdd:"Klicken Sie links auf Felder, um sie hinzuzufügen",saveAsTemplate:"Als Vorlage speichern",jsonTip:"Tipp: Ziehen Sie eine .json-Datei auf dieses Fenster, um Einstellungen zu importieren"},cloudView:{searchPlaceholder:"Profile suchen...",templates:"Vorlagen",refresh:"Aktualisieren",newPreset:"Neues Profil",clearFilters:"Filter zurücksetzen",compareMode:"Vergleichsmodus",selectAnotherPreset:"Wählen Sie ein weiteres {{type}}-Profil",clickTwoPresets:"Klicken Sie auf zwei Profile des gleichen Typs zum Vergleichen",selectFirst:"1. Erstes auswählen",selectSecond:"2. Zweites auswählen",compareNow:"Jetzt vergleichen",lastSynced:"Zuletzt synchronisiert:",showingCount:"{{showing}} von {{total}} Profilen",noPresetsFound:"Keine Profile gefunden",columns:{filament:"Filament",process:"Prozess",printer:"Drucker"},noFilamentPresets:"Keine Filament-Profile",noProcessPresets:"Keine Prozess-Profile",noPrinterPresets:"Keine Drucker-Profile",filters:{type:"Typ",owner:"Besitzer",printer:"Drucker",nozzle:"Düse",filament:"Filament",layer:"Schicht",all:"Alle",myPresets:"Meine Profile",builtIn:"Voreingestellt",process:"Prozess"},noTemplatesPermission:"Sie haben keine Berechtigung, Vorlagen zu verwalten",noRefreshPermission:"Sie haben keine Berechtigung, Profile zu aktualisieren",noCreatePermission:"Sie haben keine Berechtigung, Profile zu erstellen"},templates:{title:"Schnellvorlagen",noTemplates:"Noch keine Vorlagen",createFirst:"Erstellen Sie Vorlagen aus dem Preset-Editor",typeFilter:"Typ:",deleteTitle:"Vorlage löschen",deleteWarning:"Diese Aktion kann nicht rückgängig gemacht werden",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',namePlaceholder:"Vorlagenname",descriptionPlaceholder:"Beschreibung",settingsJson:"Einstellungen (JSON)",fieldsCount:"{{count}} Felder",shownInModals:"In Dialogen angezeigt",hiddenInModals:"In Dialogen ausgeblendet",apply:"Anwenden",toast:{deleted:"Vorlage gelöscht",updated:"Vorlage aktualisiert",created:"Vorlage erstellt",applied:"Vorlage angewendet"}}},support:{debugLoggingActive:"Debug-Protokollierung ist aktiv",manageLogs:"Verwalten",collectItem7:"Drucker-Verbindungsstatus und Firmware-Versionen",collectItem8:"Integrationsstatus (Spoolman, MQTT, HA)",collectItem9:"Netzwerkschnittstellen (nur Subnetze)",collectItem10:"Python-Paketversionen",collectItem11:"Datenbankzustandsprüfungen",collectItem12:"Docker-Umgebungsdetails"},fileManager:{title:"Dateimanager",subtitle:"Organisieren und verwalten Sie Ihre Druckdateien",uploadFiles:"Dateien hochladen",newFolder:"Neuer Ordner",folderName:"Ordnername",folderNamePlaceholder:"z.B. Funktionsteile",renameFile:"Datei umbenennen",renameFolder:"Ordner umbenennen",moveFiles:"{{count}} Datei(en) verschieben",rootNoFolder:"Stammverzeichnis (Kein Ordner)",current:"aktuell",linkFolder:"Ordner verknüpfen",linkFolderDescription:'"{{name}}" mit einem Projekt oder Archiv verknüpfen für schnellen Zugriff.',project:"Projekt",archive:"Archiv",noProjectsFound:"Keine Projekte gefunden",noArchivesFound:"Keine Archive gefunden",unlink:"Verknüpfung aufheben",link:"Verknüpfen",dragDropFiles:"Dateien hierher ziehen",dropFilesHere:"Dateien hier ablegen",orClickToBrowse:"oder klicken zum Durchsuchen",allFileTypesSupported:"Alle Dateitypen werden unterstützt. ZIP-Dateien werden extrahiert.",zipFilesDetected:"ZIP-Dateien erkannt",zipExtractOptions:"ZIP-Dateien werden extrahiert. Wählen Sie, wie die Ordnerstruktur behandelt werden soll:",preserveZipStructure:"Ordnerstruktur aus ZIP beibehalten",createFolderFromZip:"Ordner aus ZIP-Dateiname erstellen",stlThumbnailGeneration:"STL-Vorschaubildgenerierung",zipMayContainStl:"ZIP-Dateien können STL-Dateien enthalten. Vorschaubilder können während der Extraktion generiert werden.",thumbnailsCanBeGenerated:"Vorschaubilder können für STL-Dateien generiert werden. Große Modelle benötigen möglicherweise mehr Zeit.",generateThumbnailsForStl:"Vorschaubilder für STL-Dateien generieren",threemfDetected:"3MF-Dateien erkannt",threemfExtractionInfo:"Druckermodell, Material, Farbe und Druckeinstellungen werden automatisch aus 3MF-Dateien extrahiert.",willBeExtracted:"Wird extrahiert",filesExtracted:"{{count}} Dateien extrahiert",uploadComplete:"Upload abgeschlossen: {{succeeded}} erfolgreich",uploadFailed:"Hochladen fehlgeschlagen",zipFilesFailed:"{{count}} Dateien fehlgeschlagen",uploading:"Hochladen...",changeLink:"Verknüpfung ändern...",linkTo:"Verknüpfen mit...",linkToProjectOrArchive:"Mit Projekt oder Archiv verknüpfen",addToQueue:"Zur Warteschlange",schedulePrint:"Planen",generateThumbnail:"Vorschaubild generieren",generateThumbnails:"Vorschaubilder generieren",generateThumbnailsForMissing:"Vorschaubilder für STL-Dateien ohne Vorschau generieren",gridView:"Rasteransicht",listView:"Listenansicht",lowDiskSpaceWarning:"Warnung: Wenig Speicherplatz",lowDiskSpaceDetails:"Nur {{free}} frei von {{total}} gesamt. Schwellenwert ist auf {{threshold}} GB eingestellt.",files:"Dateien",folders:"Ordner",size:"Größe",free:"Frei",allFiles:"Alle Dateien",wrap:"Umbrechen",enableTextWrapping:"Textumbruch aktivieren",disableTextWrapping:"Textumbruch deaktivieren",collapse:"Einklappen",collapseFoldersByDefault:"Ordner standardmäßig einklappen",expandFoldersByDefault:"Ordner standardmäßig ausklappen",dragToResizeTooltip:"Ziehen zum Ändern der Größe, Doppelklick zum Zurücksetzen",searchFiles:"Dateien suchen...",allTypes:"Alle Typen",prints:"Drucke",ascending:"Aufsteigend",descending:"Absteigend",resultsCount:"{{showing}} von {{total}} Dateien",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",selected:"{{count}} ausgewählt",adding:"Hinzufügen...",loadingFiles:"Dateien werden geladen...",folderIsEmpty:"Ordner ist leer",noFilesYet:"Noch keine Dateien",folderEmptyDescription:"Laden Sie Dateien hoch oder verschieben Sie Dateien in diesen Ordner.",noFilesDescription:"Laden Sie Dateien hoch, um Ihre Druckdateien zu organisieren.",noMatchingFiles:"Keine passenden Dateien",noMatchingFilesDescription:"Keine Dateien entsprechen Ihren aktuellen Such- oder Filterkriterien.",clearFilters:"Filter zurücksetzen",printedCount:"{{count}}x gedruckt",uploadedBy:"Hochgeladen von",deleteFolder:"Ordner löschen",deleteFile:"Datei löschen",deleteFilesCount:"{{count}} Dateien löschen",deleteFolderConfirm:"Möchten Sie diesen Ordner wirklich löschen? Alle Dateien darin werden ebenfalls gelöscht.",deleteFileConfirm:"Möchten Sie diese Datei wirklich löschen?",deleteFilesConfirm:"Möchten Sie {{count}} ausgewählte Dateien wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.",deleting:"Wird gelöscht...",noPermissionRenameFolder:"Sie haben keine Berechtigung, Ordner umzubenennen",noPermissionLinkFolder:"Sie haben keine Berechtigung, Ordner zu verknüpfen",noPermissionDeleteFolder:"Sie haben keine Berechtigung, Ordner zu löschen",noPermissionPrint:"Sie haben keine Berechtigung zum Drucken",noPermissionSlice:"Sie haben keine Berechtigung, Dateien zu slicen",noPermissionAddToQueue:"Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen",noPermissionDownload:"Sie haben keine Berechtigung, Dateien herunterzuladen",noPermissionRenameFile:"Sie haben keine Berechtigung, diese Datei umzubenennen",noPermissionGenerateThumbnail:"Sie haben keine Berechtigung, Vorschaubilder zu generieren",noPermissionDeleteFile:"Sie haben keine Berechtigung, diese Datei zu löschen",noPermissionCreateFolder:"Sie haben keine Berechtigung, Ordner zu erstellen",noPermissionUpload:"Sie haben keine Berechtigung, Dateien hochzuladen",noPermissionMoveFiles:"Sie haben keine Berechtigung, Dateien zu verschieben",noPermissionDeleteFiles:"Sie haben keine Berechtigung, Dateien zu löschen",linkExternal:"Extern verknüpfen",linkExternalFolder:"Externen Ordner verknüpfen",linkExternalFolderDescription:"Ein Host-Verzeichnis (NAS, USB, Netzlaufwerk) in den Dateimanager einbinden. Dateien werden nicht kopiert — sie werden direkt vom Originalpfad gelesen.",externalFolderNamePlaceholder:"z.B. NAS-Drucke",externalPath:"Host-Pfad",externalPathHelp:"Absoluter Pfad zum Verzeichnis auf dem Docker-Host. Muss als Bind-Mount in den Container eingebunden sein.",readOnly:"Nur Lesen",readOnlyHelp:"verhindert Uploads und Löschungen",showHiddenFiles:"Versteckte Dateien anzeigen (Punkt-Dateien)",externalFolder:"Externer Ordner",scanFolder:"Scannen",toast:{folderCreated:"Ordner erstellt",folderDeleted:"Ordner gelöscht",fileDeleted:"Datei gelöscht",filesDeleted:"{{count}} Dateien gelöscht",filesMoved:"Dateien verschoben",folderLinked:"Ordner verknüpft",folderUnlinked:"Ordnerverknüpfung aufgehoben",externalFolderLinked:"Externer Ordner verknüpft und gescannt",folderScanned:"Scan abgeschlossen: {{added}} hinzugefügt, {{removed}} entfernt",addedToQueue:"{{count}} Datei(en) zur Warteschlange hinzugefügt",addedToQueuePartial:"{{added}} Datei(en) hinzugefügt, {{failed}} fehlgeschlagen",failedToAddToQueue:"Fehler beim Hinzufügen: {{error}}",fileRenamed:"Datei umbenannt",folderRenamed:"Ordner umbenannt",thumbnailsGenerated:"{{count}} Vorschaubild(er) generiert",thumbnailsGeneratedPartial:"{{succeeded}} Vorschaubild(er) generiert, {{failed}} fehlgeschlagen",noStlMissingThumbnails:"Keine STL-Dateien ohne Vorschaubild",failedToGenerateThumbnails:"Fehler beim Generieren der Vorschaubilder: {{error}}",thumbnailGenerated:"Vorschaubild generiert",failedToGenerateThumbnail:"Fehler beim Generieren des Vorschaubildes: {{error}}"}},projects:{title:"Projekte",subtitle:"Organisieren und verfolgen Sie Ihre 3D-Druckprojekte",newProject:"Neues Projekt",editProject:"Projekt bearbeiten",deleteProject:"Projekt löschen",projectName:"Projektname",description:"Beschreibung",noProjects:"Noch keine Projekte",noProjectsFiltered:"Keine {{status}} Projekte",noProjectsFilteredHelp:"Sie haben keine {{status}} Projekte. Projekte werden hier angezeigt, wenn sich ihr Status ändert.",createFirst:"Erstellen Sie Ihr erstes Projekt, um verwandte Drucke zu organisieren, den Fortschritt zu verfolgen und Ihre Builds zu verwalten.",createFirstButton:"Erstes Projekt erstellen",create:"Erstellen",files:"Dateien",prints:"Drucke",plates:"Platten",parts:"Teile",lastModified:"Zuletzt geändert",deleteConfirm:"Möchten Sie dieses Projekt wirklich löschen? Archive und Warteschlangenelemente werden getrennt, aber nicht gelöscht.",addFiles:"Dateien hinzufügen",removeFile:"Datei entfernen",viewDetails:"Details anzeigen",namePlaceholder:"z.B. Voron 2.4 Build",descriptionPlaceholder:"Optionale Beschreibung...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URL muss mit http:// oder https:// beginnen",openExternalUrl:"Projekt-URL öffnen",coverImageLabel:"Titelbild",coverImageAlt:"Projekt-Titelbild",coverImageUpload:"Hochladen",coverImageReplace:"Ersetzen",coverImageRemove:"Entfernen",color:"Farbe",targetPlates:"Ziel-Platten",targetPlatesPlaceholder:"z.B. 25",targetPlatesHelp:"Anzahl der Druckaufträge",targetParts:"Ziel-Teile",targetPartsPlaceholder:"z.B. 150",targetPartsHelp:"Benötigte Objekte insgesamt",tagsLabel:"Tags (kommagetrennt)",tagsPlaceholder:"z.B. voron, funktional, geschenk",dueDate:"Fälligkeitsdatum",priority:"Priorität",priorityLow:"Niedrig",priorityNormal:"Normal",priorityHigh:"Hoch",priorityUrgent:"Dringend",statusActive:"Aktiv",statusCompleted:"Abgeschlossen",statusArchived:"Archiviert",done:"Fertig",completed:"abgeschlossen",failed:"fehlgeschlagen",inQueue:"in Warteschlange",noPrintsYet:"Noch keine Drucke",printJobs:"Druckaufträge (Platten)",partsPrinted:"Gedruckte Teile",failedParts:"Fehlgeschlagene Teile",import:"Importieren",export:"Exportieren",importProject:"Projekt importieren",exportAll:"Alle Projekte exportieren",loading:"Projekte werden geladen...",noEditPermission:"Sie haben keine Berechtigung, Projekte zu bearbeiten",noDeletePermission:"Sie haben keine Berechtigung, Projekte zu löschen",noCreatePermission:"Sie haben keine Berechtigung, Projekte zu erstellen",noImportPermission:"Sie haben keine Berechtigung, Projekte zu importieren",noExportPermission:"Sie haben keine Berechtigung, Projekte zu exportieren",toast:{created:"Projekt erstellt",updated:"Projekt aktualisiert",deleted:"Projekt gelöscht",imported:"Projekt importiert",multipleImported:"{{count}} Projekte importiert",importFailed:"Import fehlgeschlagen",exported:"Projekte exportiert (nur Metadaten)"}},projectDetail:{notFound:"Projekt nicht gefunden",backToProjects:"Zurück zu Projekten",export:"Exportieren",exportProject:"Projekt exportieren",noExportPermission:"Sie haben keine Berechtigung, Projekte zu exportieren",noEditPermission:"Sie haben keine Berechtigung, Projekte zu bearbeiten",partOf:"Teil von:",priorityLabel:"Priorität:",noPrints:"Noch keine Drucke in diesem Projekt",status:{active:"Aktiv",completed:"Abgeschlossen",archived:"Archiviert"},priority:{low:"Niedrig",normal:"Normal",high:"Hoch",urgent:"Dringend"},dueDate:{overdue:"Überfällig",today:"Heute fällig",daysLeft:"{{count}} Tage übrig"},progress:{platesProgress:"Platten-Fortschritt",partsProgress:"Teile-Fortschritt",printJobs:"Druckaufträge",parts:"Teile",percentComplete:"{{percent}}% abgeschlossen",remaining:"{{count}} verbleibend"},stats:{printJobs:"Druckaufträge",total:"gesamt",failed:"{{count}} fehlgeschlagen",partsPrinted:"{{count}} Teile gedruckt",printTime:"Druckzeit",filamentUsed:"Filament verbraucht"},cost:{title:"Kostenverfolgung",filamentCost:"Filamentkosten",energy:"Energie",totalCost:"Gesamtkosten",total:"Gesamt",includesBom:"inkl. Stückliste",budget:"Budget",remaining:"Verbleibend"},subProjects:{title:"Unterprojekte ({{count}})"},notes:{title:"Notizen",noEditPermission:"Sie haben keine Berechtigung, Notizen zu bearbeiten",placeholder:"Notizen zu diesem Projekt hinzufügen...",empty:"Noch keine Notizen. Klicken Sie auf Bearbeiten, um Notizen hinzuzufügen."},files:{title:"Dateien",linkFolders:"Ordner aus dem Dateimanager verknüpfen",forQuickAccess:"für schnellen Zugriff auf dieses Projekt.",fileCount:"{{count}} Datei(en)",empty:"Keine Ordner verknüpft. Gehen Sie zum Dateimanager und verknüpfen Sie einen Ordner mit diesem Projekt.",noFiles:"Keine Dateien in diesem Ordner.",print:"Jetzt drucken",addToQueue:"Zur Warteschlange"},bom:{title:"Stückliste",acquired:"{{completed}}/{{total}} beschafft",showAll:"Alle anzeigen",hideDone:"Erledigte ausblenden",addPart:"Teil hinzufügen",noAddPermission:"Sie haben keine Berechtigung, Teile hinzuzufügen",partNamePlaceholder:"Teilename (z.B. M3x8 Schrauben)",partName:"Teilename",qty:"Menge",price:"Preis ({{currency}})",sourcingUrlPlaceholder:"Bezugsquelle-URL (optional)",remarksPlaceholder:"Bemerkungen (optional)",deletePart:"Teil löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',noUpdatePermission:"Sie haben keine Berechtigung, Teile zu aktualisieren",noEditPermission:"Sie haben keine Berechtigung, Teile zu bearbeiten",noDeletePermission:"Sie haben keine Berechtigung, Teile zu löschen",totalCost:"Gesamtkosten:",empty:"Keine Teile in der Stückliste. Fügen Sie Hardware, Elektronik oder andere Komponenten hinzu, um zu verfolgen, was beschafft werden muss."},timeline:{title:"Aktivitätsverlauf",empty:"Noch keine Aktivität."},template:{saveAsTemplate:"Als Vorlage speichern",noCreatePermission:"Sie haben keine Berechtigung, Vorlagen zu erstellen"},queue:{title:"Warteschlange",viewAll:"Alle anzeigen",printing:"{{count}} druckend",queued:"{{count}} in Warteschlange"},prints:{title:"Drucke ({{count}})"},toast:{projectUpdated:"Projekt aktualisiert",partAdded:"Teil hinzugefügt",partRemoved:"Teil entfernt",exportFailed:"Export fehlgeschlagen",projectExported:"Projekt exportiert",templateCreated:"Vorlage erstellt"}},system:{title:"Systeminformationen",version:"Version",uptime:"Laufzeit",cpuUsage:"CPU-Auslastung",memoryUsage:"Speicherauslastung",diskUsage:"Festplattenauslastung",networkInfo:"Netzwerkinformationen",logs:"Protokolle",debugMode:"Debug-Modus",enableDebug:"Debug-Protokollierung aktivieren",disableDebug:"Debug-Protokollierung deaktivieren",downloadLogs:"Protokolle herunterladen",clearLogs:"Protokolle löschen",dockerInfo:"Docker-Info",containerName:"Container-Name",imageName:"Image-Name",platform:"Plattform",architecture:"Architektur"},library:{title:"Filament-Bibliothek",addFilament:"Filament hinzufügen",editFilament:"Filament bearbeiten",deleteFilament:"Filament löschen",vendor:"Hersteller",material:"Material",color:"Farbe",kFactor:"K-Faktor",temperature:"Temperatur",noFilaments:"Keine Filamente in der Bibliothek",deleteConfirm:"Möchten Sie dieses Filament wirklich löschen?",importFromPrinter:"Vom Drucker importieren",exportToFile:"In Datei exportieren"},slice:{title:"Modell slicen",action:"Slice",slicing:"Slicen…",printer:"Drucker-Profil",process:"Prozess-Profil",filament:"Filament-Profil",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Profil auswählen —",loadingPresets:"Profile werden geladen…",analyzingPlateFilaments:"Plattenfilamente werden analysiert…",analyzingPlateFilamentsHint:"Es wird ein Probeschnitt ausgeführt, um die belegten AMS-Slots dieser Platte zu ermitteln. Wird zwischengespeichert — erneutes Öffnen ist sofort.",previewToast:"{{name}} wird analysiert — {{elapsed}}",previewWithProgress:"{{name}} wird analysiert — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— wird von dieser Platte nicht verwendet",printerMismatch:"Dieses 3MF wurde für {{source}} gesliced, du hast aber {{target}} ausgewählt. Der Slicer-CLI kann ein 3MF nicht für einen anderen Drucker neu slicen — öffne die Quelle in Bambu Studio, ändere den Drucker und exportiere neu.",noPresetsForSlot:"Keine Profile verfügbar",presetsLoadFailed:"Profile konnten nicht geladen werden. Importiere sie zuerst unter Einstellungen → Profile.",allPresetsRequired:"Alle Profile müssen ausgewählt sein",enqueuing:"Slice-Auftrag wird übermittelt…",queued:"In Warteschlange…",failed:"Slicen fehlgeschlagen. Logs des Slicer-Sidecars prüfen.",startedToast:"{{name}} wird im Hintergrund gesliced…",queuedToast:"Warteschlange: {{name}} — {{elapsed}}",runningToast:"{{name}} wird gesliced — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"{{name}} wurde gesliced",failedToast:"Slicen von {{name}} fehlgeschlagen: {{detail}}",tier:{local:"Importiert",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"In Bambu Cloud anmelden (Einstellungen → Profile → Cloud), um deine Cloud-Profile zu sehen.",expired:"Bambu-Cloud-Sitzung abgelaufen — erneut anmelden, um die Cloud-Profile zu aktualisieren.",unreachable:"Bambu Cloud ist gerade nicht erreichbar. Lokale und Standard-Profile funktionieren weiterhin."}},spoolman:{title:"Spoolman-Integration",enabled:"Spoolman aktiviert",url:"Spoolman URL",connected:"Verbunden",disconnected:"Nicht verbunden",testConnection:"Verbindung testen",sync:"Synchronisieren",syncing:"Synchronisiert...",lastSync:"Letzte Synchronisierung",linkToSpoolman:"Mit Spoolman verknüpfen",openInSpoolman:"In Spoolman öffnen",unlinkSpool:"Spule trennen",unlinkConfirmTitle:"Spule entkoppeln?",unlinkConfirmMessage:"Dadurch wird die Spule von Spoolman getrennt. Die Spulendaten in Spoolman bleiben unverändert.",selectSpool:"Spule auswählen",noUnlinkedSpools:"Keine nicht verknüpften Spulen verfügbar",linkSuccess:"Spule erfolgreich mit Spoolman verknüpft",linkFailed:"Verknüpfung mit Spoolman fehlgeschlagen",unlinkSuccess:"Spule erfolgreich von Spoolman getrennt",unlinkFailed:"Trennen der Spule von Spoolman fehlgeschlagen",spoolId:"Spulen-ID",fillSourceLabel:"(Spoolman)",weight:"Gewicht",remaining:"Verbleibend",disableWeightSync:"AMS-Gewichtsschätzung deaktivieren",disableWeightSyncDesc:"Verbleibende Kapazität nicht aus AMS-Schätzungen aktualisieren. Verwenden Sie dies, wenn Sie die Verbrauchserfassung von Spoolman gegenüber den prozentualen AMS-Schätzungen bevorzugen. Neue Spulen verwenden weiterhin die AMS-Schätzung als Anfangsgewicht.",reportPartialUsage:"Teilverbrauch bei fehlgeschlagenen Drucken melden",reportPartialUsageDesc:"Wenn ein Druck fehlschlägt oder abgebrochen wird, den geschätzten Filamentverbrauch bis zu diesem Zeitpunkt basierend auf dem Schichtfortschritt melden."},inventory:{title:"Spulen-Inventar",spoolmanMixedContentTitle:"Spoolman lässt sich nicht über HTTPS laden — Browser blockiert gemischte Inhalte",spoolmanMixedContentBody:"Bambuddy wird über HTTPS ausgeliefert (über deinen Reverse-Proxy), aber deine Spoolman-URL ist nach wie vor HTTP. Browser blockieren gemischte Inhalte aus Sicherheitsgründen, daher kann die eingebettete Spoolman-Oberfläche nicht geladen werden. Spoolman muss ebenfalls über HTTPS erreichbar sein.",spoolmanMixedContentFixReverseProxy:"Stelle Spoolman hinter denselben Reverse-Proxy wie Bambuddy (Traefik / Nginx / Caddy) mit HTTPS und aktualisiere die Spoolman-URL in den Einstellungen auf die neue HTTPS-Adresse.",spoolmanMixedContentFixOpenNewTab:"Als Workaround kannst du Spoolman in einem neuen Tab über HTTP öffnen — gemischte Inhalte werden nur innerhalb eingebetteter Frames blockiert, ein eigener Tab funktioniert weiterhin.",spoolmanOpenInNewTab:"Spoolman in neuem Tab öffnen",addSpool:"Spule hinzufügen",editSpool:"Spule bearbeiten",material:"Material",selectMaterial:"Material auswählen...",subtype:"Untertyp",brand:"Marke",searchBrand:"Marke suchen...",useCustomBrand:'"{{brand}}" verwenden',useCustomMaterial:"Benutzerdefiniertes Material verwenden: {{material}}",colorName:"Farbname",colorNamePlaceholder:"Jade White, Fire Red...",color:"Farbe",hexColor:"Hex-Farbe",pickColor:"Benutzerdefinierte Farbe wählen",labelWeight:"Nenngewicht",coreWeight:"Leergewicht der Spule",searchSpoolWeight:"Spulengewicht suchen...",weightUsed:"Verbraucht",currentWeight:"Restgewicht",measuredWeight:"Gemessenes Gewicht",spoolName:"Spule",costPerKg:"Kosten pro kg",measuredWeightError:"Das gemessene Gewicht muss zwischen {{min}}g und {{max}}g liegen.",slicerFilament:"Slicer-Filament",slicerFilamentName:"Slicer-Preset-Name",slicerPreset:"Slicer-Preset",searchPresets:"Filament-Presets suchen...",selectedPreset:"Ausgewählt",noPresetsFound:"Keine Presets gefunden",tempOverrides:"Temperatur-Überschreibungen",note:"Notiz",notePlaceholder:"Zusätzliche Notizen zu dieser Spule...",category:"Kategorie",categoryPlaceholder:"z. B. Produktion, Prototyp, Kunde A",categoryNone:"Ohne Kategorie",lowStockThresholdOverride:"Niedrigbestandsschwelle (diese Spule)",lowStockThresholdOverrideHelp:"Leer lassen, um den globalen Schwellenwert ({{global}}%) zu verwenden.",clearRfid:"RFID-Tag löschen",rfidCleared:"RFID-Tag gelöscht",archive:"Archivieren",restore:"Wiederherstellen",noSpools:"Noch keine Spulen. Fügen Sie Ihre erste Spule hinzu.",noAvailableSpools:"Keine Spulen verfügbar. Fügen Sie eine Spule zum Inventar hinzu oder lösen Sie eine aus einem anderen Slot.",kProfiles:"K-Profile",addKProfile:"K-Profil hinzufügen",assignSpool:"Spule zuweisen",unassignSpool:"Zuweisung aufheben",assignSuccess:"Spule zugewiesen und AMS-Slot konfiguriert",assignFailed:"Spulenzuweisung fehlgeschlagen",selectSpool:"Wählen Sie eine Spule für diesen Slot",assigned:"Zugewiesen",assigning:"Wird zugewiesen...",searchSpools:"Spulen suchen...",showAllSpools:"Alle Spulen anzeigen",allMaterials:"Alle Materialien",filterByBrand:"Nach Marke filtern...",showArchived:"Archivierte anzeigen",quickAdd:"Schnellerfassung (Lager)",quantity:"Menge",stock:"Lager",configured:"Konfiguriert",spoolsCreated:"{{count}} Spulen erstellt",spoolCreated:"Spule erstellt",spoolUpdated:"Spule aktualisiert",spoolDeleted:"Spule gelöscht",spoolArchived:"Spule archiviert",spoolRestored:"Spule wiederhergestellt",deleteConfirm:"Möchten Sie diese Spule wirklich löschen? Dies kann nicht rückgängig gemacht werden.",archiveConfirm:"Möchten Sie diese Spule wirklich archivieren?",advancedSettings:"Erweiterte Einstellungen",filamentInfoTab:"Filament-Info",paProfileTab:"PA-Profil",filamentInfo:"Filament",additional:"Zusätzlich",loadingPresets:"Cloud-Presets werden geladen...",cloudConnected:"Cloud verbunden",cloudNotConnected:"Cloud nicht verbunden (Standardwerte)",recentColors:"Zuletzt",searchColors:"Farben suchen...",searchResults:"Suchergebnisse",allColors:"Alle Farben",commonColors:"Häufige Farben",showLess:"Weniger",showAll:"Alle",noColorsFound:"Keine Farben gefunden",noResults:"Keine Ergebnisse",extraColorsLabel:"Zusätzliche Farben",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"2 bis 8 Hex-Stops, durch Kommas getrennt. Wird als Verlauf dargestellt.",extraColorsInvalid:"Ungültige Hex-Werte ignoriert: {{tokens}}",colorEffectLabel:"Effekt",colorEffect:{none:"Keiner",sparkle:"Glitzer",wood:"Holz",marble:"Marmor",glow:"Leuchtend",matte:"Matt",silk:"Seide",galaxy:"Galaxy",rainbow:"Regenbogen",metal:"Metallic",translucent:"Lichtdurchlässig",gradient:"Verlauf",dualColor:"Zweifarbig",triColor:"Dreifarbig",multicolor:"Mehrfarbig"},selectMaterialFirst:"Bitte zuerst ein Material im Filament-Info Tab auswählen.",noPrintersConfigured:"Keine Drucker konfiguriert. Fügen Sie Drucker hinzu.",matchingFilter:"Filter",anyBrand:"Jede Marke",anyVariant:"Jede Variante",autoSelect:"Auto-Auswahl",matches:"Treffer",match:"Treffer",noMatches:"Keine Treffer",connected:"Verbunden",offline:"Offline",printerOffline:"Drucker ist offline. Verbinden Sie ihn, um Kalibrierungsprofile anzuzeigen.",noKProfilesMatch:"Keine K-Profile stimmen mit dem gewählten Filament überein.",leftNozzle:"Linke Düse",rightNozzle:"Rechte Düse",profilesSelected:"Kalibrierungsprofil(e) ausgewählt",totalInventory:"Gesamtbestand",totalConsumed:"Gesamtverbrauch",byMaterial:"Nach Material",inPrinter:"Im Drucker",lowStock:"Niedriger Bestand",sinceTracking:"Seit Beginn der Erfassung",loadedInAms:"Im AMS/Ext geladen",remaining:"Verbleibend",weightCheck:"Gewichtskontrolle",lastWeighed:"Zuletzt gewogen",neverWeighed:"Nie gewogen",search:"Spulen suchen...",showing:"Zeige",to:"bis",of:"von",show:"Zeige",spools:"Spulen",spool:"Spule",page:"Seite",noSpoolsMatch:"Keine Ergebnisse",noSpoolsMatchDesc:"Versuchen Sie, Ihre Suche oder Filter anzupassen.",active:"Aktiv",archived:"Archiviert",all:"Alle",used:"Verwendet",new:"Neu",clearFilters:"Filter löschen",table:"Tabelle",cards:"Karten",net:"Netto",groupSimilar:"Gruppieren",groupedSpools:"{{count}} identische Spulen",groupedRows:"Zeilen",columns:"Spalten",configureColumns:"Spalten konfigurieren",configureColumnsDesc:"Ziehen zum Neuordnen oder Pfeile verwenden. Sichtbarkeit mit dem Augensymbol umschalten.",visible:"sichtbar",reset:"Zurücksetzen",cancel:"Abbrechen",applyChanges:"Änderungen anwenden",moveUp:"Nach oben",moveDown:"Nach unten",hideColumn:"Spalte ausblenden",showColumn:"Spalte einblenden",linkToSpool:"Mit Spule verknüpfen",tagLinked:"Tag mit Spule verknüpft",tagLinkFailed:"Tag-Verknüpfung fehlgeschlagen",tagAlreadyLinked:"Tag bereits mit anderer Spule verknüpft",unknownTag:"Unbekannter RFID-Tag erkannt",usageHistory:"Verbrauchshistorie",noUsageHistory:"Noch kein Verbrauch erfasst",printName:"Druckname",weightConsumed:"Verbrauchtes Gewicht",clearHistory:"Löschen",historyCleared:"Verbrauchshistorie gelöscht",fillSourceLabel:"(Inv)",lowStockThresholdError:"Der Schwellenwert muss zwischen 0.1 und 99.9 liegen",assignMismatchTitle:"Material stimmt nicht überein",assignMismatchMessage:'Das ausgewählte Spulenmaterial "{{spoolMaterial}}" stimmt nicht mit dem Tray-Material "{{trayMaterial}}" für {{location}} überein. Trotzdem zuweisen?',assignMismatchConfirm:"Trotzdem zuweisen",assignPartialMismatchMessage:'Das Spulenmaterial "{{spoolMaterial}}" ist ähnlich, stimmt aber nicht genau mit "{{trayMaterial}}" in {{location}} überein. Möchten Sie fortfahren?',assignProfileMismatchMessage:'Das Spulenprofil "{{spoolProfile}}" stimmt nicht mit dem Fachprofil "{{trayProfile}}" in {{location}} überein. Möchten Sie fortfahren?'},timelapse:{title:"Zeitraffer",create:"Zeitraffer erstellen",download:"Herunterladen",delete:"Löschen",preview:"Vorschau",frameRate:"Bildrate",quality:"Qualität",processing:"Wird verarbeitet...",noTimelapses:"Keine Zeitraffer verfügbar"},ams:{title:"AMS",slot:"Slot",empty:"Leer",emptySlot:"Leerer Slot",unknown:"Unbekannt",humidity:"Luftfeuchtigkeit",temperature:"Temperatur",filamentType:"Filamenttyp",filamentColor:"Farbe",remaining:"Verbleibend",history:"AMS-Verlauf",noHistory:"Kein Verlauf verfügbar",configureSlot:"Slot konfigurieren",externalSpool:"Externe Spule",profile:"Profil",kFactor:"K-Faktor",fill:"Füllstand",configure:"Konfigurieren",used:"verwendet",remainingUnit:"verbleibend"},printModal:{title:"Druck starten",selectPrinter:"Drucker auswählen",selectPlate:"Platte auswählen",filamentMapping:"Filamentzuordnung",totalCost:"Gesamtkosten:",slotRemainingShort:" - {{grams}}g übrig",printSettings:"Druckeinstellungen",bedLeveling:"Bett-Nivellierung",flowCalibration:"Fluss-Kalibrierung",vibrationCalibration:"Vibrations-Kalibrierung",layerInspection:"Erste-Schicht-Prüfung",timelapse:"Zeitraffer",startPrint:"Druck starten",addToQueue:"Zur Warteschlange hinzufügen",cancel:"Abbrechen",noPrintersAvailable:"Keine Drucker verfügbar",printerBusy:"Drucker ist beschäftigt",printerOffline:"Drucker ist offline",sameTypeDifferentColor:"Gleicher Typ, andere Farbe",filamentTypeNotLoaded:"Filamenttyp nicht geladen",openCalendar:"Kalender öffnen",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Linke Düse",rightNozzleTooltip:"Rechte Düse",filamentOverride:"Filament-Überschreibung",filamentOverrideHint:"Filamente für modellbasierte Zuweisung optional überschreiben. Der Planer wird gegen die ausgewählten Filamente statt der ursprünglichen 3MF-Werte abgleichen.",originalFilament:"Original",overrideWith:"Ersetzen mit",resetToOriginal:"Auf Original zurücksetzen",insufficientFilamentTitle:"Nicht genug Filament",insufficientFilamentMessage:"Einige zugewiesene Spulen haben weniger Filament als dieser Druck benötigt:",insufficientFilamentLine:"{{printer}} - {{slot}}: benötigt {{required}}g, verbleibend {{remaining}}g",printAnyway:"Trotzdem drucken",forceColorMatch:"Farbe erzwingen",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Gestaffelt an {{count}} Drucker senden",gcodeInjection:"Auto-Print G-code einfügen"},backup:{title:"Sichern & Wiederherstellen",createBackup:"Sicherung erstellen",restoreBackup:"Sicherung wiederherstellen",restoreDescription:"Alle Daten aus einer Sicherungsdatei ersetzen",downloadBackup:"Sicherung herunterladen",uploadBackup:"Sicherung hochladen",lastBackup:"Letzte Sicherung",autoBackup:"Automatische Sicherung",backupNow:"Jetzt sichern",restoreWarning:"Warnung: Das Wiederherstellen einer Sicherung überschreibt alle aktuellen Daten.",includeArchives:"Archive einschließen",includeSettings:"Einstellungen einschließen",includeProfiles:"Profile einschließen",backupSuccess:"Sicherung erfolgreich erstellt",restoreSuccess:"Sicherung erfolgreich wiederhergestellt",backupFailed:"Sicherung fehlgeschlagen",restoreFailed:"Wiederherstellung fehlgeschlagen",restoreNote:"Virtueller Drucker wird während der Wiederherstellung gestoppt",githubBackup:"GitHub Backup",enabled:"Aktiviert",cloudLoginRequired:"Bambu Cloud Login erforderlich. Melden Sie sich unter Profile → Cloud-Profile an, um GitHub-Backup zu aktivieren.",cloudLoginRequiredShort:"Cloud-Login erforderlich",githubDescription:"Synchronisieren Sie Ihre Profile automatisch mit einem privaten GitHub-Repository für Backup und Versionsverlauf.",repositoryUrl:"Repository-URL",personalAccessToken:"Persönlicher Zugriffstoken",tokenSaved:"(gespeichert)",enterNewToken:"Neuen Token eingeben zum Aktualisieren",tokenHint:"Feingranularer Token mit Lese-/Schreibberechtigung für Inhalte",branch:"Branch",manualOnly:"Nur manuell",hourly:"Stündlich",daily:"Täglich",weekly:"Wöchentlich",includeInBackup:"In Sicherung einschließen",kProfiles:"K-Profile",kProfilesDescription:"Druckvorschub-Kalibrierung von verbundenen Druckern",noPrintersConnected:"Keine Drucker verbunden",printersConnected:"{{connected}}/{{total}} verbunden",cloudProfiles:"Cloud-Profile",cloudProfilesDescription:"Filament-, Drucker- und Prozessprofile aus der Bambu Cloud",appSettings:"App-Einstellungen",appSettingsDescription:"Bambuddy-Konfiguration (komplette Datenbank)",spoolInventory:"Spulenbestand",spoolInventoryDescription:"Filamentspulen, Nutzungsverlauf und Kostenverfolgung",printArchives:"Druckarchive",printArchivesDescription:"Druckverlauf-Metadaten (keine GCode/3MF-Dateien)",lastBackupAt:"Letzte Sicherung:",noBackupsYet:"Noch keine Sicherungen",next:"Nächste:",startingBackup:"Sicherung wird gestartet...",test:"Test",enableBackup:"Sicherung aktivieren",testConnection:"Verbindung testen",enterRepoUrl:"Repository-URL eingeben",enterRepoAndToken:"Repository-URL und Zugriffstoken eingeben",repoRequired:"Repository-URL ist erforderlich",tokenRequired:"Zugriffstoken ist erforderlich",githubBackupEnabled:"GitHub-Backup aktiviert",tokenUpdated:"Token aktualisiert",settingsSaved:"Einstellungen gespeichert",failedToSave:"Speichern fehlgeschlagen: {{message}}",backupCompleteFiles:"Sicherung abgeschlossen - {{count}} Dateien aktualisiert",backupSkippedNoChanges:"Sicherung übersprungen - keine Änderungen",backupFailed2:"Sicherung fehlgeschlagen: {{message}}",clearedLogs:"{{count}} Protokolle gelöscht",failedToClearLogs:"Protokolle löschen fehlgeschlagen: {{message}}",history:"Verlauf",clear:"Löschen",date:"Datum",status:"Status",commit:"Commit",localBackup:"Lokale Sicherung",localBackupDescription:"Erstellen Sie eine vollständige Sicherung Ihrer Bambuddy-Daten einschließlich Datenbank, Archive, Uploads und aller Dateien.",downloadBackupLabel:"Sicherung herunterladen",completeBackupZip:"Vollständige Sicherung: Datenbank + alle Dateien (ZIP)",download:"Herunterladen",preparingBackup:"Sicherung wird vorbereitet...",creatingArchive:"Sicherungsarchiv wird erstellt... Dies kann bei großen Archiven eine Weile dauern.",downloadingFile:"Sicherungsdatei wird heruntergeladen...",backupDownloaded:"Sicherung erfolgreich heruntergeladen",failedToCreateBackup:"Sicherung erstellen fehlgeschlagen: {{message}}",restore:"Wiederherstellen",restoreReplacesAll:"Wiederherstellung ersetzt alle Daten.",restoreReplacesAllDetail:"Ihre aktuelle Datenbank und Dateien werden vollständig ersetzt. Nach der Wiederherstellung ist ein Neustart erforderlich.",restoreConfirmTitle:"Sicherung wiederherstellen",restoreConfirmMessage:'Sind Sie sicher, dass Sie von "{{filename}}" wiederherstellen möchten? Dies ersetzt Ihre aktuelle Datenbank und alle Dateien vollständig. Die Anwendung muss nach der Wiederherstellung neu gestartet werden.',restoreConfirmButton:"Sicherung wiederherstellen",uploadingFile:"Sicherungsdatei wird hochgeladen...",backupRestoredRestart:"Sicherung wiederhergestellt. Bitte starten Sie Bambuddy neu.",failedToRestore:"Sicherung wiederherstellen fehlgeschlagen. Bitte überprüfen Sie das Dateiformat.",reloadNow:"Jetzt neu laden",creatingBackup:"Sicherung erstellen",restoringBackup:"Sicherung wiederherstellen",preparing:"Vorbereiten...",processing:"Verarbeiten...",doNotClosePage:"Bitte schließen Sie diese Seite nicht und navigieren Sie nicht weg. Dieser Vorgang kann bei großen Sicherungen mehrere Minuten dauern.",restoring:"Wiederherstellen...",restoreComplete:"Wiederherstellung abgeschlossen",restoreFailed2:"Wiederherstellung fehlgeschlagen",importSettings:"Einstellungen aus einer Sicherungsdatei importieren",pleaseWaitRestoring:"Bitte warten Sie, während Ihre Daten wiederhergestellt werden",selectBackupFile:"Klicken Sie, um eine Sicherungsdatei auszuwählen (.json oder .zip)",duplicateHandling:"So funktioniert die Duplikatbehandlung:",matchPrinters:"Drucker",matchPrintersBy:"abgeglichen nach Seriennummer",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"abgeglichen nach IP-Adresse",matchNotificationProviders:"Benachrichtigungsanbieter",matchNotificationProvidersBy:"abgeglichen nach Name",matchFilaments:"Filamente",matchFilamentsBy:"abgeglichen nach Name + Typ + Marke",matchArchives:"Archive",matchArchivesBy:"abgeglichen nach Inhaltshash (immer übersprungen)",matchPendingUploads:"Ausstehende Uploads",matchPendingUploadsBy:"abgeglichen nach Dateiname",matchSettingsTemplates:"Einstellungen & Vorlagen",matchSettingsTemplatesBy:"immer überschrieben",replaceExisting:"Vorhandene Daten ersetzen",keepExisting:"Vorhandene Daten behalten",overwriteDescription:"Bereits vorhandene Elemente mit Sicherungsdaten überschreiben",keepDescription:"Nur Elemente wiederherstellen, die noch nicht vorhanden sind",overwriteCaution:"Achtung:",overwriteWarning:"Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Daten aus der Sicherung. Drucker-Zugangscodes werden aus Sicherheitsgründen nie überschrieben.",cancel:"Abbrechen",processingBackup:"Sicherungsdatei wird verarbeitet...",itemsRestored:"Wiederhergestellt",itemsSkipped:"Übersprungen",restored:"Wiederhergestellt",skippedAlreadyExist:"Übersprungen (bereits vorhanden)",filesCategory:"Dateien (3MF, Thumbnails, etc.)",andMore:"...und {{count}} weitere",newApiKeysGenerated:"Neue API-Schlüssel generiert",keysShownOnce:"Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!",copy:"Kopieren",noDataFound:"In der Sicherungsdatei wurden keine Daten zur Wiederherstellung gefunden.",close:"Schließen",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Einstellungen",notification_providers:"Benachrichtigungsanbieter",notification_templates:"Benachrichtigungsvorlagen",smart_plugs:"Smart Plugs",printers:"Drucker",filaments:"Filamente",maintenance_types:"Wartungstypen",archives:"Archive",projects:"Projekte",pending_uploads:"Ausstehende Uploads",external_links:"Externe Links",api_keys:"API-Schlüssel"}},tags:{title:"Tags",addTag:"Tag hinzufügen",editTag:"Tag bearbeiten",deleteTag:"Tag löschen",tagName:"Tag-Name",tagColor:"Tag-Farbe",noTags:"Keine Tags",deleteConfirm:"Möchten Sie diesen Tag wirklich löschen?",manageTags:"Tags verwalten"},uploadModal:{title:"3MF-Dateien hochladen",dragDrop:"3MF-Dateien hierher ziehen",or:"oder",browseFiles:"Dateien durchsuchen",extractionInfo:"Das Druckermodell wird automatisch aus den 3MF-Datei-Metadaten extrahiert.",uploaded:"hochgeladen",failed:"fehlgeschlagen",uploading:"Wird hochgeladen...",upload:"Hochladen",uploadFailed:"Hochladen fehlgeschlagen"},editArchive:{title:"Archiv bearbeiten",name:"Name",namePlaceholder:"Druckname",printer:"Drucker",noPrinter:"Kein Drucker",project:"Projekt",noProject:"Kein Projekt",itemsPrinted:"Gedruckte Teile",itemsPrintedHelp:"Anzahl der in diesem Druckauftrag produzierten Teile",notes:"Notizen",notesPlaceholder:"Notizen zu diesem Druck hinzufügen...",externalLink:"Externer Link",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link zu Printables, Thingiverse oder anderer Quelle",tags:"Tags",tagsPlaceholder:"Tags hinzufügen...",addMoreTags:"Weitere Tags hinzufügen...",matchingTags:'Übereinstimmend mit "{{query}}"',existingTags:"Vorhandene Tags",clickToAdd:"(zum Hinzufügen klicken)",status:"Status",failureReason:"Fehlergrund",selectReason:"Grund auswählen...",photos:"Fotos des Druckergebnisses",photosHelp:"Klicken Sie auf + um Fotos Ihres Druckergebnisses hinzuzufügen",printResult:"Druckergebnis",saving:"Wird gespeichert...",failureReasons:{adhesionFailure:"Haftungsfehler",spaghettiDetached:"Spaghetti / Abgelöst",layerShift:"Schichtversatz",cloggedNozzle:"Verstopfte Düse",filamentRunout:"Filament aufgebraucht",warping:"Verformung",stringing:"Fadenziehen",underExtrusion:"Unterextrusion",powerFailure:"Stromausfall",userCancelled:"Vom Benutzer abgebrochen",other:"Sonstiges"},statuses:{completed:"Abgeschlossen",failed:"Fehlgeschlagen",aborted:"Abgebrochen",printing:"Druckt"}},kProfiles:{title:"K-Profile",noPrintersConfigured:"Keine Drucker konfiguriert",addPrinterInSettings:"Fügen Sie einen Drucker in den Einstellungen hinzu, um K-Profile zu verwalten",noActivePrinters:"Keine aktiven Drucker",enablePrinterConnection:"Aktivieren Sie eine Druckerverbindung, um K-Profile anzuzeigen",loadingProfiles:"Lade K-Profile...",printerOffline:"Drucker offline",printerOfflineDesc:"Der ausgewählte Drucker ist nicht verbunden. Schalten Sie ihn ein, um K-Profile anzuzeigen.",noMatchingProfiles:"Keine passenden Profile",noMatchingProfilesDesc:"Keine Profile entsprechen Ihren Suchkriterien",noKProfiles:"Keine K-Profile",noKProfilesDesc:"Keine Druckvorschub-Profile für {{diameter}}mm Düse gefunden",createFirstProfile:"Erstes Profil erstellen",printer:"Drucker",nozzle:"Düse",refresh:"Aktualisieren",addProfile:"Profil hinzufügen",export:"Exportieren",import:"Importieren",select:"Auswählen",selectAll:"Alle auswählen",delete:"Löschen",searchPlaceholder:"Nach Name oder Filament suchen...",allExtruders:"Alle Extruder",leftOnly:"Nur links",rightOnly:"Nur rechts",allFlow:"Alle Flusstypen",hfOnly:"Nur HF",sOnly:"Nur S",sortName:"Sortieren: Name",sortKValue:"Sortieren: K-Wert",sortFilament:"Sortieren: Filament",leftExtruder:"Linker Extruder",rightExtruder:"Rechter Extruder",modal:{addTitle:"K-Profil hinzufügen",editTitle:"K-Profil bearbeiten",profileName:"Profilname",profileNamePlaceholder:"Mein PLA-Profil",kValue:"K-Wert",kValuePlaceholder:"0,020",kValueHelp:"Typischer Bereich: 0,01 - 0,06 für PLA, 0,02 - 0,10 für PETG",filament:"Filament",selectFilament:"Filament auswählen...",noFilamentsHelp:"Keine Filamente gefunden. Erstellen Sie zuerst ein K-Profil in Bambu Studio.",flowType:"Flusstyp",highFlow:"High Flow",standard:"Standard",nozzleSize:"Düsengröße",extruder:"Extruder",extruders:"Extruder",left:"Links",right:"Rechts",notes:"Notizen (lokal gespeichert)",notesPlaceholder:"Notizen zu diesem Profil hinzufügen...",notesHelp:"Notizen werden in Bambuddy gespeichert, nicht auf dem Drucker",syncing:"Synchronisiert mit Drucker...",savingExtruder:"Speichern auf Extruder {{current}}/{{total}}...",pleaseWait:"Bitte warten"},deleteConfirm:{title:"Profil löschen",cannotUndo:"Dies kann nicht rückgängig gemacht werden",message:'Möchten Sie "{{name}}" wirklich vom Drucker löschen?'},bulkDelete:{title:"Profile löschen",cannotUndo:"Dies kann nicht rückgängig gemacht werden",message:"Möchten Sie wirklich {{count}} ausgewählte Profile vom Drucker löschen?"},toast:{profileSaved:"K-Profil gespeichert",profilesSaved:"K-Profil auf {{count}} Extrudern gespeichert",selectAtLeastOneExtruder:"Bitte wählen Sie mindestens einen Extruder aus",profileDeleted:"K-Profil gelöscht",profilesDeleted:"{{count}} Profile gelöscht",exportedProfiles:"{{count}} Profile exportiert",importedProfiles:"{{count}} von {{total}} Profilen importiert",noProfilesToExport:"Keine Profile zum Exportieren",invalidFileFormat:"Ungültiges Dateiformat",failedToParseImport:"Import-Datei konnte nicht gelesen werden",failedToSaveBatch:"K-Profile konnten nicht gespeichert werden",noteSaved:"Notiz gespeichert",failedToSaveNote:"Notiz konnte nicht gespeichert werden"},permission:{noRead:"Sie haben keine Berechtigung, Profile zu aktualisieren",noCreate:"Sie haben keine Berechtigung, Profile hinzuzufügen",noUpdate:"Sie haben keine Berechtigung, K-Profile zu aktualisieren",noDelete:"Sie haben keine Berechtigung, K-Profile zu löschen",noExport:"Sie haben keine Berechtigung, Profile zu exportieren",noImport:"Sie haben keine Berechtigung, Profile zu importieren"}},virtualPrinter:{title:"Virtueller Drucker",running:"Läuft",stopped:"Gestoppt",description:{default:"Aktiviere einen virtuellen Drucker, der in Bambu Studio und OrcaSlicer erscheint. Dateien, die an diesen Drucker gesendet werden, werden direkt archiviert ohne zu drucken.",proxy:"Aktiviere einen Proxy, der Slicer-Datenverkehr an einen echten Drucker weiterleitet, um Ferndruck über jedes Netzwerk zu ermöglichen."},enable:{title:"Virtuellen Drucker aktivieren",visibleInSlicer:'Sichtbar als "Bambuddy" in der Slicer-Erkennung',proxyingTo:"Proxy zu {{name}}",notActive:"Nicht aktiv"},model:{title:"Druckermodell",description:"Wähle welches Druckermodell emuliert werden soll.",restartWarning:"Das Ändern des Modells startet den virtuellen Drucker neu"},accessCode:{title:"Zugangscode",isSet:"Zugangscode ist gesetzt",notSet:"Kein Zugangscode gesetzt - erforderlich zum Aktivieren",placeholder:"8-Zeichen-Code eingeben",placeholderChange:"Neuen Code eingeben zum Ändern",hint:"Muss genau 8 Zeichen lang sein. Wird von Slicern zur Authentifizierung verwendet.",charCount:"({{count}}/8)"},targetPrinter:{title:"Zieldrucker",configured:"Proxy-Ziel konfiguriert",notConfigured:"Kein Zieldrucker ausgewählt - erforderlich für Proxy-Modus",placeholder:"Drucker auswählen...",hint:"Wähle den Drucker aus, an den der Slicer-Datenverkehr weitergeleitet werden soll. Der Drucker muss im LAN-Modus sein.",noPrinters:"Keine Drucker konfiguriert. Füge zuerst einen Drucker hinzu, um den Proxy-Modus zu verwenden."},remoteInterface:{title:"Netzwerkschnittstelle überschreiben",configured:"Schnittstellenüberschreibung aktiv",optional:"Optional - verwenden wenn die automatisch erkannte IP falsch ist (z.B. mehrere NICs, Docker, VPN)",placeholder:"Automatisch erkennen (Standard)...",hint:"Überschreibt die per SSDP beworbene und im TLS-Zertifikat verwendete IP-Adresse. Nützlich wenn Bambuddy mehrere Netzwerkschnittstellen hat."},mode:{title:"Modus",archive:"Archivieren",archiveDesc:"Dateien sofort archivieren",review:"Überprüfen",reviewDesc:"Vor dem Archivieren überprüfen",queue:"Warteschlange",queueDesc:"Archivieren und zur Warteschlange hinzufügen",proxy:"Proxy",proxyDesc:"An echten Drucker weiterleiten"},autoDispatch:{title:"Automatisch starten",description:"Drucke automatisch starten, wenn sie zur Warteschlange hinzugefügt werden. Wenn deaktiviert, warten Drucke auf manuellen Start."},tailscaleDisabled:{title:"Tailscale-Integration",description:"Wenn aktiviert, werden Tailscale-zertifizierte TLS-Zertifikate verwendet. Deaktivieren für selbstsignierte Zertifikate."},setupRequired:{title:"Einrichtung erforderlich",description:"Die virtuelle Druckerfunktion erfordert zusätzliche Systemkonfiguration, bevor sie funktioniert. Dies beinhaltet Portweiterleitung, Firewall-Regeln und plattformspezifische Einstellungen.",readGuide:"Lese die Einrichtungsanleitung vor dem Aktivieren"},archiveNameSource:{title:"Quelle des Archivnamens",description:'Lege fest, wie neue Archive benannt werden, wenn Dateien über den virtuellen Drucker eintreffen. "Metadaten" verwendet den im 3MF eingebetteten Titel des Slicers (Standard). "Dateiname" nutzt den Dateinamen, den Bambu Studio per FTP gesendet hat — praktisch, wenn der Job im Dialog "Zum Drucker senden" umbenannt wurde.',metadata:"Metadaten",filename:"Dateiname"},howItWorks:{title:"So funktioniert es",step1:"Im selben LAN erscheinen virtuelle Drucker automatisch in deinem Slicer (Bambu Studio / OrcaSlicer). Aus anderen Netzwerken füge sie manuell per IP-Adresse und Zugangscode hinzu.",step2:'Im Archiv-, Überprüfungs- und Warteschlangen-Modus verwende die "Senden"-Funktion im Slicer, um 3MF-Dateien an Bambuddy zu senden. Der Slicer zeigt "Druck erfolgreich" — die Datei wird gespeichert, nicht gedruckt.',step3:"Im Proxy-Modus leitet der virtuelle Drucker den gesamten Datenverkehr an einen echten Drucker weiter — Drucke starten sofort wie bei einer direkten Verbindung."},status:{title:"Status-Details",printerName:"Druckername",model:"Modell",serialNumber:"Seriennummer",mode:"Modus",pendingFiles:"Ausstehende Dateien",targetPrinter:"Zieldrucker",ftpPort:"FTP-Port",mqttPort:"MQTT-Port",ftpConnections:"FTP-Verbindungen",mqttConnections:"MQTT-Verbindungen"},toast:{updated:"Virtuelle Druckereinstellungen aktualisiert",failedToUpdate:"Einstellungen konnten nicht aktualisiert werden",tailscaleNotAvailable:"Tailscale ist auf diesem Host nicht installiert. Installiere Tailscale zuerst und versuche es dann erneut.",copyFailed:"Kopieren fehlgeschlagen — bitte Text manuell markieren",accessCodeRequired:"Bitte zuerst einen Zugangscode setzen",targetPrinterRequired:"Bitte zuerst einen Zieldrucker auswählen",bindIpRequired:"Bitte zuerst eine Bind-IP setzen",accessCodeEmpty:"Zugangscode darf nicht leer sein",accessCodeLength:"Zugangscode muss genau 8 Zeichen lang sein",created:"Virtueller Drucker erstellt",failedToCreate:"Virtueller Drucker konnte nicht erstellt werden",deleted:"Virtueller Drucker gelöscht",failedToDelete:"Virtueller Drucker konnte nicht gelöscht werden"},list:{title:"Virtuelle Drucker",add:"Hinzufügen",addFirst:"Virtuellen Drucker hinzufügen",empty:"Keine virtuellen Drucker konfiguriert. Fügen Sie einen hinzu, um zu beginnen."},bindIp:{title:"Bind-Interface",placeholder:"Interface auswählen...",hint:"Netzwerkinterface, an das dieser virtuelle Drucker gebunden wird. Muss pro Drucker eindeutig sein."},proxy:{accessCodeHint:"Im Proxy-Modus den Zugangscode des Zieldruckers im Slicer verwenden. Die Verbindung wird transparent zum echten Drucker weitergeleitet."},addDialog:{title:"Virtuellen Drucker hinzufügen",name:"Name",hint:"Sie können Zugangscode, Zieldrucker und andere Einstellungen nach dem Erstellen konfigurieren.",create:"Erstellen"},deleteConfirm:{title:"Virtuellen Drucker löschen",message:'Möchten Sie "{{name}}" wirklich löschen? Dies stoppt alle Dienste für diesen Drucker.'}},modelViewer:{openInSlicer:"Im Slicer öffnen",tabs:{model:"3D-Modell",gcode:"G-Code Vorschau"},notAvailable:"nicht verfügbar",notSliced:"nicht geslicet",plates:"Platten",allPlates:"Alle Platten",plateNumber:"Platte {{number}}",plateCount:"{{count}} Platte",plateCount_other:"{{count}} Platten",objectCount:"{{count}} Objekt",objectCount_other:"{{count}} Objekte",filamentCount:"{{count}} Filament",filamentCount_other:"{{count}} Filamente",eta:"ETA {{minutes}} Min",noPreview:"Keine Vorschau für diese Datei verfügbar",pagination:{pageOf:"Seite {{current}} von {{total}}",prev:"Zurück",next:"Weiter"},errors:{failedToLoad:"Datei konnte nicht geladen werden",noMeshes:"Keine Meshes in 3MF-Datei gefunden",unsupportedFormat:"Nicht unterstütztes Dateiformat"}},maintenanceDescriptions:{lubricateCarbonRods:"Schmiermittel auf Karbonstäbe für sanfte Bewegung auftragen",lubricateRails:"Schmiermittel auf Linearschienen für sanfte Bewegung auftragen",cleanNozzle:"Hotend und Düse reinigen, um Verstopfungen zu verhindern",checkBelts:"Riemenspannung für präzise Drucke überprüfen",cleanBuildPlate:"Druckplatte für bessere Haftung reinigen",checkExtruder:"Extruderzahnräder auf Verschleiß prüfen",checkCooling:"Sicherstellen, dass Lüfter ordnungsgemäß funktionieren",generalInspection:"Allgemeine Druckerinspektion",cleanCarbonRods:"Karbonstäbe reinigen, um Reibung zu reduzieren",lubricateSteelRods:"Schmiermittel auf Stahlstangen für sanfte Bewegung auftragen",cleanSteelRods:"Stahlstangen reinigen, um Reibung zu reduzieren",cleanLinearRails:"Linearschienen abwischen, um Staub und Schmutz zu entfernen",checkPtfeTube:"PTFE-Schlauch auf Verschleiß oder Beschädigung prüfen",replaceHepaFilter:"HEPA-Filter für Luftqualität ersetzen",replaceCarbonFilter:"Aktivkohlefilter ersetzen",lubricateLeftNozzleRail:"Linke Düsenschiene schmieren (H2-Serie)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Plug-Admin-Seite öffnen",deleteSmartPlug:"Smart Plug löschen",turnOnSmartPlug:"Smart Plug einschalten",turnOffSmartPlug:"Smart Plug ausschalten",turnOn:"Einschalten",turnOff:"Ausschalten",addSmartPlug:{scanningNetwork:"Netzwerk wird durchsucht...",chooseEntity:"Entität auswählen...",connectionFailed:"Verbindung fehlgeschlagen",searchEntities:"Entitäten suchen...",searchPowerSensors:"Leistungssensoren suchen...",searchEnergySensors:"Energiesensoren suchen...",placeholders:{plugName:"Wohnzimmer Steckdose",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Gleich wie Leistungs-Topic oder anders"}},linkedTo:"Verbunden mit:",monitorOnly:"Nur Überwachung",alerts:"Alarme",scheduleOn:"Ein {{time}}",scheduleOff:"Aus {{time}}",on:"Ein",off:"Aus",power:"Leistung",kwhToday:"kWh Heute",settings:"Einstellungen",automationSettings:"Automatisierungseinstellungen",showInSwitchbar:"In Schaltleiste anzeigen",quickAccessSidebar:"Schnellzugriff über Seitenleiste",enabled:"Aktiviert",enableAutomation:"Automatisierung für diesen Stecker aktivieren",autoOn:"Auto Ein",autoOnDescription:"Einschalten wenn Druck startet",autoOff:"Auto Aus",autoOffDescription:"Ausschalten wenn Druck abgeschlossen (einmalig)",autoOffPersistent:"Aktiviert lassen",autoOffPersistentDescription:"Zwischen Drucken aktiviert bleiben statt einmalig",turnOffDelayMode:"Ausschaltverzögerungsmodus",time:"Zeit",temp:"Temp",delayMinutes:"Verzögerung (Minuten)",tempThreshold:"Temperaturschwelle (°C)",tempThresholdDescription:"Schaltet aus wenn die Düse unter diese Temperatur abkühlt",edit:"Bearbeiten",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen? Dies kann nicht rückgängig gemacht werden.',turnOnConfirm:'Möchten Sie "{{name}}" wirklich einschalten?',turnOffConfirm:'Möchten Sie "{{name}}" wirklich ausschalten? Dies unterbricht die Stromversorgung des angeschlossenen Geräts.',failedToTurn:'{{name}}" konnte nicht {{action}} werden',unknown:"Unbekannt",addTitle:"Smart Plug hinzufügen",editTitle:"Smart Plug bearbeiten",stopScanning:"Suche beenden",discoverTasmota:"Tasmota Geräte suchen",foundDevices:"{{count}} Gerät(e) gefunden - zum Auswählen klicken:",noDevicesFound:"Keine Tasmota Geräte in Ihrem Netzwerk gefunden",haNotConfigured:"Home Assistant ist nicht konfiguriert. Einrichtung unter",haSettingsPath:"Einstellungen → Netzwerk → Home Assistant",selectEntity:"Entität auswählen *",ipAddress:"IP-Adresse *",nameLabel:"Name *",username:"Benutzername",password:"Passwort",authHint:"Leer lassen, wenn Ihr Tasmota-Gerät keine Authentifizierung benötigt",linkToPrinter:"Mit Drucker verbinden",noPrinter:"Kein Drucker (nur manuelle Steuerung)",linkingDescription:"Verknüpfung ermöglicht automatisches Ein-/Ausschalten bei Druckstart/-ende",powerAlerts:"Leistungsalarme",alertAbove:"Alarm wenn über (W)",alertBelow:"Alarm wenn unter (W)",alertDescription:"Benachrichtigung wenn der Stromverbrauch diese Schwellenwerte überschreitet. Leer lassen um diese Richtung zu deaktivieren.",dailySchedule:"Tagesplan",turnOnAt:"Einschalten um",turnOffAt:"Ausschalten um",scheduleDescription:"Den Stecker automatisch täglich zu diesen Zeiten ein-/ausschalten. Leer lassen um diese Aktion zu überspringen.",showOnPrinterCard:"Auf Druckerkarte anzeigen",displayOnPrinterCard:"Schaltfläche auf Druckerkarte anzeigen",connectedResult:"Verbunden!",deviceLabel:"Gerät: {{name}} - ",stateLabel:"Status: {{state}}",test:"Test",delete:"Löschen",save:"Speichern",add:"Hinzufügen",cancel:"Abbrechen",failedToStartScan:"Suche konnte nicht gestartet werden",nameRequired:"Name ist erforderlich",entityRequired:"Entität ist für Home Assistant Stecker erforderlich",mqttTopicRequired:"Mindestens ein MQTT-Topic muss für Leistung, Energie oder Statusüberwachung konfiguriert sein",loadingEntities:"Entitäten werden geladen...",loading:"Laden...",failedToLoadEntities:"Entitäten konnten nicht geladen werden: {{error}}",noEntitiesMatching:'Keine Entitäten gefunden die "{{search}}" entsprechen',noEntitiesAvailable:"Keine Entitäten verfügbar",searchingEntities:"Alle Entitäten durchsuchen ({{count}} gefunden)",showingEntities:"Zeige switch, light, input_boolean ({{count}} verfügbar)",energyMonitoringOptional:"Energieüberwachung (Optional)",energyMonitoringHint:"Sensoren suchen und auswählen, die Leistungs-/Energiedaten liefern.",powerSensorW:"Leistungssensor (W)",energyTodayKwh:"Energie Heute (kWh)",totalEnergyKwh:"Gesamtenergie (kWh)",noMatchingSensors:"Keine passenden Sensoren",none:"Keine",mqttNotConfigured:"MQTT-Broker nicht konfiguriert. Broker-Adresse einstellen unter",mqttSettingsPath:"Einstellungen → Netzwerk → MQTT-Veröffentlichung",mqttNotConfiguredSuffix:"(Sie müssen die Veröffentlichung nicht aktivieren, nur die Broker-Details ausfüllen).",mqttMonitorOnlyDescription:"MQTT-Stecker empfangen Leistungs-/Energiedaten über MQTT-Abonnement. Ein-/Ausschalten ist nicht verfügbar - verwenden Sie Ihren MQTT-Broker oder Ihr Home-Automation-System.",powerMonitoring:"Leistungsüberwachung",energyMonitoring:"Energieüberwachung",stateMonitoring:"Statusüberwachung",optional:"optional",topic:"Topic",jsonPath:"JSON-Pfad",multiplier:"Multiplikator",onValue:"EIN-Wert",mqttPowerHint:`JSON-Pfad extrahiert Wert aus JSON-Payload (z.B. "power_l1"). Leer lassen wenn Topic rohe numerische Werte sendet.
+ON value: the exact string that means "ON". Leave empty for auto-detect (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"Power URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"Power Multiplier",restEnergyUrl:"Energy URL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Energy Multiplier",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"Separate URL for power data (uses Status URL if empty)",restEnergyUrlHint:"Separate URL for energy data (uses Status URL if empty)",restEnergyHint:"Each value can use its own URL or fall back to the Status URL. Use multipliers for unit conversion (e.g. 0.001 to convert Wh to kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"No switches in switchbar",enableSwitchbarHint:'Enable "Show in Switchbar" in Settings > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"Email",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP email notifications",telegram:"Notifications via Telegram bot",discord:"Send to Discord channel via webhook",ntfy:"Free, self-hostable push notifications",pushover:"Simple, reliable push notifications",callmebot:"Free WhatsApp notifications via CallMeBot",webhook:"Generic HTTP POST to any URL",homeassistant:"Persistent notifications in Home Assistant dashboard"},lastSuccess:"Last: {{date}}",error:"Error",printer:"Printer:",allPrinters:"All printers",sendTestNotification:"Send Test Notification",eventSettings:"Event Settings",enabled:"Enabled",sendFromProvider:"Send notifications from this provider",printEvents:"Print Events",printerStatus:"Printer Status",amsAlarms:"AMS Alarms",amsHtAlarms:"AMS-HT Alarms",printQueue:"Print Queue",start:"Start",plateCheck:"Plate Check",complete:"Complete",failed:"Failed",stopped:"Stopped",progress:"Progress",offline:"Offline",lowFilament:"Low Filament",maintenance:"Maintenance",amsHumidity:"AMS Humidity",amsTemp:"AMS Temp",amsHtHumidity:"AMS-HT Humidity",amsHtTemp:"AMS-HT Temp",bedCooled:"Bed Cooled",firstLayer:"First Layer",quiet:"Quiet",digest:"Digest {{time}}",printStarted:"Print Started",plateNotEmpty:"Plate Not Empty",plateNotEmptyDescription:"Objects detected before print",printCompleted:"Print Completed",bedCooledLabel:"Bed Cooled",bedCooledDescription:"Bed cooled below threshold after print",firstLayerCompleteLabel:"First Layer Complete",firstLayerCompleteDescription:"Notify with snapshot when first layer finishes",missingSpoolAssignmentLabel:"Missing Spool Assignment",missingSpoolAssignmentDescription:"Notify when print starts and required trays have no assigned spool",printFailed:"Print Failed",printStopped:"Print Stopped",progressMilestones:"Progress Milestones",progressMilestonesDescription:"Notify at 25%, 50%, 75%",printerOffline:"Printer Offline",printerError:"Printer Error",lowFilamentLabel:"Low Filament",maintenanceDue:"Maintenance Due",maintenanceDueDescription:"Notify when maintenance is needed",amsHumidityHigh:"AMS Humidity High",amsHumidityHighDescription:"Regular AMS humidity exceeds threshold",amsTemperatureHigh:"AMS Temperature High",amsTemperatureHighDescription:"Regular AMS temperature exceeds threshold",amsHtHumidityHigh:"AMS-HT Humidity High",amsHtHumidityHighDescription:"AMS-HT humidity exceeds threshold",amsHtTemperatureHigh:"AMS-HT Temperature High",amsHtTemperatureHighDescription:"AMS-HT temperature exceeds threshold",jobAdded:"Job Added",jobAddedDescription:"Job added to queue",jobAssigned:"Job Assigned",jobAssignedDescription:"Model-based job assigned to printer",jobStarted:"Job Started",jobStartedDescription:"Queue job started printing",jobWaiting:"Job Waiting",jobWaitingDescription:"Job waiting for filament or printer",jobSkipped:"Job Skipped",jobSkippedDescription:"Job skipped (previous failed)",jobFailed:"Job Failed",jobFailedDescription:"Job failed to start",queueComplete:"Queue Complete",queueCompleteDescription:"All queue jobs finished",quietHours:"Quiet Hours",noNotificationsDuring:"No notifications during these hours",editProviderToChangeQuietHours:"Edit provider to change quiet hours",dailyDigest:"Daily Digest",batchNotifications:"Batch notifications into a single daily summary",sendAt:"Send at {{time}}",editProviderToChangeDigestTime:"Edit provider to change digest time",edit:"Edit",deleteProvider:"Delete Notification Provider",deleteConfirm:'Are you sure you want to delete "{{name}}"? This cannot be undone.',delete:"Delete",addTitle:"Add Notification Provider",editTitle:"Edit Notification Provider",nameLabel:"Name *",namePlaceholder:"My Notifications",providerTypeLabel:"Provider Type *",configuration:"Configuration",testConfiguration:"Test Configuration",printerFilter:"Printer Filter",onlyFromPrinter:"Only send notifications for events from this printer",quietHoursDnd:"Quiet Hours (Do Not Disturb)",quietStart:"Start",quietEnd:"End",dailyDigestLabel:"Daily Digest",sendDigestAt:"Send digest at",digestCollected:"Events will be collected and sent as a single summary at this time",notificationEvents:"Notification Events",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(after print completes)",eventPriority:{sectionTitle:"ntfy Priority",helpNtfy:"Pick a priority for each enabled event. ntfy uses these to escalate alerts (sound, visibility, push behavior). Levels not set here use the ntfy server default.",min:"Min",low:"Low",default:"Default",high:"High",urgent:"Urgent"},cancel:"Cancel",save:"Save",add:"Add",nameRequired:"Name is required",fieldRequired:"{{field}} is required",phoneNumber:"Phone Number",apiKey:"API Key",serverUrl:"Server URL",topic:"Topic",authToken:"Auth Token",userKey:"User Key",appToken:"App Token",priority:"Priority",botToken:"Bot Token",chatId:"Chat ID",smtpServer:"SMTP Server",smtpPort:"SMTP Port",security:"Security",authentication:"Authentication",username:"Username",password:"Password",fromEmail:"From Email",toEmail:"To Email",webhookUrl:"Webhook URL",payloadFormat:"Payload Format",authorization:"Authorization",titleFieldName:"Title Field Name",messageFieldName:"Message Field Name",editTemplate:"Edit Template: {{name}}",titleLabel:"Title",bodyLabel:"Body",titlePlaceholder:"Notification title...",bodyPlaceholder:"Notification body...",availableVariables:"Available Variables",clickToInsert:"Click to insert at cursor position in body",livePreview:"Live Preview",hide:"Hide",show:"Show",loadingPreview:"Loading preview...",enterTemplateContent:"Enter template content to see preview",titlePreview:"Title:",bodyPreview:"Body:",resetToDefault:"Reset to Default",titleRequired:"Title is required",bodyRequired:"Body is required",notificationLog:"Notification Log",showFailedOnly:"Failed only",last24Hours:"Last 24 hours",last7Days:"Last 7 days",last30Days:"Last 30 days",last90Days:"Last 90 days",justNow:"Just now",noFailedNotifications:"No failed notifications",noNotificationsLogged:"No notifications logged",unknownProvider:"Unknown Provider",logTitle:"Title",logMessage:"Message",logError:"Error",logProvider:"Provider: {{type}}",logTime:"Time: {{time}}",refresh:"Refresh",clearOld:"Clear Old",statsSummary:"Last {{days}} days:",statsNotifications:"notifications",statsSent:"{{count}} sent",statsFailed:"{{count}} failed",eventTypes:{print_start:"Print Started",print_complete:"Print Complete",print_failed:"Print Failed",print_stopped:"Print Stopped",print_progress:"Progress",printer_offline:"Printer Offline",printer_error:"Printer Error",filament_low:"Low Filament",maintenance_due:"Maintenance Due",test:"Test"},userEmail:{title:"Notifications",emailNotifications:"Email Notifications",emailNotificationsDesc:"Receive email notifications for your own print jobs. Emails are sent using the system SMTP settings configured in Advanced Authentication.",sendingTo:"Notifications will be sent to",noEmailWarning:"Your account does not have an email address. Contact an administrator to add one.",printJobNotifications:"Print Job Notifications",printJobNotificationsDesc:"Choose which events trigger email notifications for print jobs you submit.",printJobStarts:"Print Job Starts",printJobStartsDesc:"Get notified when your print job begins.",printJobFinishes:"Print Job Finishes",printJobFinishesDesc:"Get notified when your print job completes successfully.",printErrors:"Print Errors",printErrorsDesc:"Get notified when your print job fails or encounters an error.",printJobStops:"Print Job Stops",printJobStopsDesc:"Get notified when your print job is cancelled or stopped.",saveSuccess:"Notification preferences saved.",saveError:"Failed to save notification preferences."}},richTextEditor:{bold:"Bold",italic:"Italic",underline:"Underline",bulletList:"Bullet List",numberedList:"Numbered List",alignLeft:"Align Left",alignCenter:"Align Center",alignRight:"Align Right",addLink:"Add Link",removeLink:"Remove Link"},externalLinks:{noLinksConfigured:"No external links configured",deleteLink:"Delete Link",removeCustomIcon:"Remove custom icon",openInNewTab:"Open in new tab",placeholders:{linkName:"My Link"}},keyboardShortcuts:{title:"Keyboard Shortcuts",navigation:"Navigation",archivesSection:"Archives",kProfilesSection:"K-Profiles",generalSection:"General",shortcuts:{goToPrinters:"Go to Printers",goToArchives:"Go to Archives",goToQueue:"Go to Queue",goToStats:"Go to Statistics",goToProfiles:"Go to Cloud Profiles",goToSettings:"Go to Settings",focusSearch:"Focus search",openUploadModal:"Open upload modal",clearSelection:"Clear selection / blur input",contextMenu:"Context menu on cards",refreshProfiles:"Refresh profiles",newProfile:"New profile",exitSelectionMode:"Exit selection mode",showHelp:"Show this help"},footer:"Press Esc or click outside to close"},notificationLog:{title:"Notification Log",events:{printStarted:"Print Started",printComplete:"Print Complete",printFailed:"Print Failed",printStopped:"Print Stopped",progress:"Progress",printerOffline:"Printer Offline",printerError:"Printer Error",lowFilament:"Low Filament",maintenanceDue:"Maintenance Due",test:"Test"},timeAgo:{justNow:"Just now",minutesAgo:"{{minutes}}m ago",hoursAgo:"{{hours}}h ago"}},restoreBackup:{title:"Restore Backup",restoring:"Restoring...",restoreComplete:"Restore Complete",restoreFailed:"Restore Failed",importSettings:"Import settings from a backup file",pleaseWait:"Please wait while your data is being restored",clickToSelect:"Click to select backup file (.json or .zip)",howDuplicateHandling:"How duplicate handling works:",categories:{printers:"Printers",smartPlugs:"Smart Plugs",notificationProviders:"Notification Providers",filaments:"Filaments",archives:"Archives",pendingUploads:"Pending Uploads",settingsTemplates:"Settings & Templates"},matchingInfo:{printers:"matched by serial number",smartPlugs:"matched by IP address",notificationProviders:"matched by name",filaments:"matched by name + type + brand",archives:"matched by content hash",pendingUploads:"matched by filename",settingsTemplates:"always overwritten"},replaceExisting:"Replace existing data",keepExisting:"Keep existing data",replaceDescription:"Overwrite items that already exist with backup data",keepDescription:"Only restore items that don't already exist",caution:"Caution:",cautionText:"Overwriting will replace your current configurations with backup data. Printer access codes are never overwritten for security.",itemsRestored:"Items Restored",itemsSkipped:"Items Skipped",restored:"Restored",skipped:"Skipped (already exist)",filesLabel:"Files (3MF, thumbnails, etc.)",newApiKeysGenerated:"New API Keys Generated",newApiKeysWarning:"These keys are only shown once. Copy them now!",processingBackup:"Processing backup file...",noDataFound:"No data was found to restore in the backup file.",failedToRestore:"Failed to restore backup. Please check the file format."},backupExport:{title:"Export Backup",selectData:"Select data to include",selectAll:"Select All",selectNone:"Select None",categoryDescriptions:{settings:"Language, theme, update preferences",notifications:"ntfy, Pushover, Discord, etc.",templates:"Custom message templates",smartPlugs:"Tasmota plug configurations",externalLinks:"Sidebar links to external services",printers:"Printer info (access codes excluded)",plateDetection:"Empty plate reference images",filaments:"Filament types and costs",maintenance:"Custom maintenance schedules",archives:"All print data + files (3MF, thumbnails, photos)",projects:"Projects, BOM items, and attachments",pendingUploads:"Virtual printer uploads awaiting review",apiKeys:"Webhook API keys (new keys generated on import)"},requiresPrinters:"Requires Printers to be selected",zipFileWarning:"ZIP file will be created.",zipFileDescription:"Includes all 3MF files, thumbnails, timelapses, and photos. This may take a while and result in a large file.",includeAccessCodes:"Include Access Codes",includeAccessCodesDescription:"For transferring to another machine",includeAccessCodesWarning:"Access codes will be included in plain text. Keep this backup file secure!",categoriesSelected:"{{selectedCount}} categories selected"},pendingUploads:{placeholders:{notes:"Add notes about this print..."},discardUpload:"Discard Upload",archiveAllUploads:"Archive All Uploads",discardAllUploads:"Discard All Uploads",archive:"Archive",timeAgo:{justNow:"Just now",minutesAgo:"{{minutes}}m ago",hoursAgo:"{{hours}}h ago",daysAgo:"{{days}}d ago"}},apiBrowser:{placeholders:{requestBody:"JSON request body...",searchEndpoints:"Search endpoints..."}},configureAmsSlot:{title:"Configure AMS Slot",slotConfigured:"Slot Configured!",configuringSlot:"Configuring slot:",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Search presets...",colorPlaceholder:"Color name or hex (e.g., brown, FF8800)",clearCustomColor:"Clear custom color",noCloudPresets:"No cloud presets. Login to Bambu Cloud to sync.",noPresetsAvailable:"No presets available. Login to Bambu Cloud or import local profiles.",noMatchingPresets:"No matching presets found.",custom:"Custom",builtin:"Built-in",settingsSentToPrinter:"Settings sent to printer",filamentProfile:"Filament Profile",kProfileLabel:"K Profile (Pressure Advance)",filteringFor:"Filtering for: {{material}}",noKProfile:"No K profile (use default 0.020)",noMatchingKProfiles:"No matching K profiles found. Default K=0.020 will be used.",selectFilamentFirst:"Select a filament profile first",kFromCalibration:"K={{value}} from printer calibration",customColorLabel:"Custom Color (optional)",presetColors:"{{name}} colors:",showLessColors:"Show less colors",showMoreColors:"Show more colors",clear:"Clear",hexLabel:"Hex: #{{hex}}",resetting:"Resetting...",resetSlot:"Reset Slot",cancel:"Cancel",configuring:"Configuring...",configureSlot:"Configure Slot"},githubBackup:{title:"GitHub Backup",history:"History",downloadBackup:"Download Backup",restoreBackup:"Restore Backup",noBackupsYet:"No backups yet"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Search tags...",renameTag:"Rename tag",deleteTag:"Delete tag"},notificationTemplates:{placeholders:{title:"Notification title...",body:"Notification body..."}},batchTag:{placeholders:{newTag:"Enter new tag..."}},photoGallery:{deletePhoto:"Delete Photo"},filamentHoverCard:{copySpoolUuid:"Copy spool UUID"},kProfilesView:{hasNote:"Has note",copyProfile:"Copy profile"},layout:{openMenu:"Open menu",noPermissionSystemInfo:"You do not have permission to view system information"},dashboard:{dragToReorder:"Drag to reorder",hideWidget:"Hide widget"},notificationProviderCard:{deleteNotificationProvider:"Delete Notification Provider"},fileManagerModal:{closeFileManager:"Close file manager",sortFiles:"Sort files",goToParentFolder:"Go to parent folder",threeView:"3D View"},embeddedCameraViewer:{refreshStream:"Refresh stream",close:"Close",zoomOut:"Zoom out",resetZoom:"Reset zoom",zoomIn:"Zoom in",dragToResize:"Drag to resize"},timelapseViewer:{skipBack5s:"Skip back 5s",skipForward5s:"Skip forward 5s"},notificationProviders:{descriptions:{email:"SMTP email notifications",telegram:"Notifications via Telegram bot",discord:"Send to Discord channel via webhook",ntfy:"Free, self-hostable push notifications",pushover:"Simple, reliable push notifications",callmebot:"Free WhatsApp notifications via CallMeBot",webhook:"Generic HTTP POST to any URL"}},logViewer:{searchPlaceholder:"Search message or logger name...",noLogEntries:"No log entries found"},switchbarPopover:{noSwitchesInSwitchbar:"No switches in switchbar"},projectPageModal:{placeholders:{title:"Title",designer:"Designer",license:"License",description:"Enter description...",profileTitle:"Profile Title",profileDescription:"Profile description..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Waiting",justNow:"Just now",now:"Now",minsAgo:"{{count}}m ago",inMins:"in {{count}}m",hoursAgo:"{{count}}h ago",inHours:"in {{count}}h",daysAgo:"{{count}}d ago",inDays:"in {{count}}d"},spoolbuddy:{nav:{dashboard:"Dashboard",ams:"AMS",inventory:"Inventory",writeTag:"Write",settings:"Settings"},status:{nfcReady:"NFC Ready",nfcOff:"NFC Off",offline:"Offline",online:"Online",noPrinters:"No printers",deviceOffline:"Device Offline",waitingConnection:"Waiting for device connection...",systemReady:"System Ready",status:"Status"},dashboard:{readyToScan:"Ready to scan",idleMessage:"Place a spool on the scale to identify it",nfcHint:"NFC tag will be read automatically",device:"Device",syncWeight:"Sync Weight",weightSynced:"Synced!",unknownTag:"Unknown Tag",newTag:"New Tag Detected",onScale:"on scale",linkSpool:"Link to Spool",linkTagTitle:"Link Tag to Spool",linkTag:"Link Tag",selectSpool:"Select a spool to link this tag to:",noUntagged:"No spools without tags found",tagDetected:"Tag detected",noTag:"No tag",tagId:"Tag",grossWeight:"Gross weight",spoolSize:"Spool size",close:"Close",currentSpool:"Current Spool",plateReady:"Plate ready: {{name}}",plateReadyLabel:"Plates ready to clear",plateClearAction:"Clear",plateClearedToast:"Plate marked as cleared",plateClearFailed:"Could not mark plate as cleared"},modal:{spoolDetected:"Spool Detected",assignToAms:"Assign to AMS",syncWeight:"Sync Weight",weightSynced:"Synced!",syncing:"Syncing...",newTagDetected:"New Tag Detected",addToInventory:"Add to Inventory",assignToAmsTitle:"Assign to AMS",selectSlot:"Select a slot",assign:"Assign",assigning:"Assigning...",assignSuccess:"Assigned!",assignError:"Failed to assign spool. Please try again.",noPrinterSelected:"Select a printer...",noAmsDetected:"No AMS detected on this printer",slot:"Slot"},weight:{noReading:"No reading",stable:"Stable",measuring:"Measuring...",tare:"Tare",calibrate:"Calibrate"},spool:{remaining:"Remaining",material:"Material",brand:"Brand",color:"Color",coreWeight:"Core",labelWeight:"Label",scaleWeight:"Scale",netWeight:"Net",lastUsed:"Last used"},ams:{noData:"No AMS detected",connectAms:"Connect an AMS to see filament slots",noPrinter:"No printer selected",selectPrinter:"Select a printer from the top bar",printerDisconnected:"Printer disconnected",humidity:"Humidity",level:"Level",active:"Active",slot:"Slot",empty:"Empty"},inventory:{search:"Search spools...",empty:"No spools in inventory",noResults:"No matching spools",spools:"spools",addSpool:"Add Spool"},settings:{tabDevice:"Device",tabDisplay:"Display",tabScale:"Scale",tabUpdates:"Updates",nfcReader:"NFC Reader",type:"Type",connection:"Connection",notConnected:"N/A",deviceInfo:"Device Info",hostname:"Host",uptime:"Uptime",systemConfig:"Backend & Auth",backendUrl:"Bambuddy Backend URL",apiToken:"API Token",apiTokenPlaceholder:"Enter API token",saveConfig:"Save Config",systemQueued:"Config queued.",nfcDiagnostic:"NFC Diagnostic",scaleDiagnostic:"Scale Diagnostic",readTagDiagnostic:"Read Tag Diagnostic",testNfc:"Test reader",testScale:"Test accuracy",testReadTag:"Read tag",systemFieldsRequired:"Backend URL is required.",brightness:"Brightness",saved:"Saved",noBacklight:"No DSI backlight detected. Brightness control requires a DSI display.",screenBlank:"Screen Blank Timeout",screenBlankDesc:"Screen turns off after inactivity. Touch to wake.",displayNote:"Brightness is applied as a software filter.",scaleCalibration:"Scale Calibration",currentWeight:"Current weight",tareOffset:"Tare",calFactor:"Factor",knownWeight:"Known weight",calStep1:"Remove all items from the scale and press Set Zero.",calStep2:"Place known weight on scale.",setZero:"Set Zero",calibrateNow:"Calibrate",calibrated:"Calibrated",tareSet:"Tare command sent. Waiting for device...",tareFailed:"Failed to send tare command",zeroSet:"Zero point set. Place known weight on scale.",calibrationDone:"Calibration complete!",calibrationFailed:"Calibration failed",lastCalibrated:"Last calibrated",stable:"Stable",settling:"Settling...",firmware:"Firmware",scale:"Scale",noDevice:"No SpoolBuddy device found",daemonVersion:"Daemon Version",currentVersion:"Current",versionPending:"Waiting for daemon...",checking:"Checking...",checkUpdates:"Check for Updates",updateAvailable:"Update available",updateInstructions:"Update via SSH: run the SpoolBuddy install script to upgrade.",upToDate:"Up to date",includeBeta:"Include beta versions"},writeTag:{tabExisting:"Existing Spool",tabNew:"New Spool",tabReplace:"Replace Tag",searchPlaceholder:"Search by material, color, brand...",noUntaggedSpools:"No spools without tags",noTaggedSpools:"No spools with tags",selectSpool:"Select a spool, then place a blank NTAG on the reader",placeTag:"Place an NTAG on the reader",tagReady:"Tag detected — ready to write",writeTag:"Write Tag",replaceTag:"Replace Tag",writing:"Writing tag...",waiting:"Waiting for SpoolBuddy...",writeSuccess:"Tag written successfully!",writeFailed:"Write failed",queueFailed:"Failed to queue write command",tryAgain:"Try Again",cancel:"Cancel",replaceWarning:"Old tag will be unlinked. New tag will replace it.",deviceOffline:"SpoolBuddy is offline",material:"Material",colorName:"Color Name",color:"Color",brand:"Brand",weight:"Weight (g)",createSpool:"Create Spool",creating:"Creating...",spoolCreated:"Spool created! Ready to write.",createFailed:"Failed to create spool"},quickMenu:{printerPower:"Printer Power",systemControls:"System",restartDaemon:"Restart Daemon",restartBrowser:"Restart Browser",reboot:"Reboot",shutdown:"Shutdown",swipeToClose:"Swipe down to close",confirmTitle:"Confirm",confirmShutdown:"Are you sure you want to shut down the SpoolBuddy? You will need physical access to turn it back on.",confirmReboot:"Are you sure you want to reboot the SpoolBuddy?",confirmRestartDaemon:"Restart the SpoolBuddy daemon? NFC and scale will be temporarily unavailable.",confirmRestartBrowser:"Restart the kiosk browser? The display will briefly go blank.",confirm:"Confirm",confirmPlugOn:"Turn on {{name}}?",confirmPlugOff:"Turn off {{name}}?",turnOn:"Turn On",turnOff:"Turn Off"}},bugReport:{title:"Report a Bug",description:"Description",descriptionPlaceholder:"What went wrong? Please describe the issue...",email:"Email (optional)",emailPlaceholder:"your@email.com",emailPrivacy:"If provided, your email will be included in a collapsed section of the GitHub issue so the maintainer can follow up.",screenshot:"Screenshot",uploadOrPaste:"Upload, paste, or drag an image",dataCollectedSummary:"What data is included in the report?",dataIncluded:"Included:",dataIncludedList:"App version, OS, architecture, Python version, database stats (counts only), printer models, nozzle counts, firmware versions, connectivity status, integration status (Spoolman, MQTT, HA), non-sensitive settings, network interface count, Docker details, dependency versions.",dataNeverIncluded:"Never included:",dataNeverIncludedList:"Printer names, serial numbers, access codes, passwords, IP addresses, email addresses, API keys, tokens, webhook URLs, hostnames, or usernames.",submit:"Submit",startLogging:"Start Debug Logging",stepEnableLogging:"Debug logging enabled",stepReproduce:"Reproduce the issue now",stepStopLogging:"Stop & submit report",stopAndSubmit:"Stop & Submit",maxDuration:"Auto-stops after {{minutes}} min",stoppingLogs:"Collecting logs & submitting...",submitting:"Submitting bug report...",submitSuccess:"Bug report submitted successfully!",submitFailed:"Failed to submit bug report",thankYou:"Thank you!",submitted:"Your bug report has been submitted.",viewIssue:"View Issue",unexpectedError:"An unexpected error occurred"},failureDetection:{title:"AI Failure Detection",description:"Monitor prints with a self-hosted Obico ML API and act on detected failures automatically.",mlUrl:"Obico ML API URL",mlUrlHint:"Base URL of your self-hosted Obico ml_api container (e.g. http://192.168.1.10:3333).",test:"Test",testSuccess:"ML API reachable and healthy.",testFailed:"Could not reach the ML API.",sensitivity:"Sensitivity",sensitivityLow:"Low (fewer false positives)",sensitivityMedium:"Medium (balanced)",sensitivityHigh:"High (detect early, more false positives)",sensitivityHint:"Adjusts the confidence thresholds that trigger warnings and failures.",action:"Action on detected failure",actionNotify:"Notify only",actionPause:"Pause print",actionPauseOff:"Pause and cut power",pollInterval:"Poll interval (seconds)",pollIntervalHint:"How often to check each printer while it is printing. Minimum 5s, maximum 120s.",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"Monitored Printers",perPrinterHint:"Choose which printers the detection service watches.",monitorAll:"Monitor all connected printers",statusTitle:"Status",serviceRunning:"Service running",thresholds:"Low / High thresholds",activePrinters:"Active prints",noActivePrints:"No prints currently running.",historyTitle:"Recent Detections",noHistory:"No detections yet."},makerworld:{title:"MakerWorld",description:"Paste a MakerWorld model URL to import and print it directly from Bambuddy — without leaving for the Bambu Handy app.",pasteUrlHeader:"Import from MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… or paste any MakerWorld link",resolveButton:"Resolve",signInRequiredTitle:"Bambu Cloud sign-in required to download",signInRequiredBody:"You can browse model details anonymously, but MakerWorld requires a Bambu Cloud account to download 3MF files.",openCloudSettings:"Open Cloud settings",untitledModel:"Untitled model",byCreator:"by {{name}}",downloadsCount:"{{count}} downloads",licensePrefix:"License",alreadyImported:"Already in library",openOnMakerworld:"Open on MakerWorld",alreadyInLibrary:"This model is already in your library — find it in File Manager → MakerWorld",importSuccess:"Imported {{filename}} — saved to File Manager → MakerWorld",platesHeader:"Plates ({{count}})",plateDefaultName:"Plate {{n}}",materialCount:"{{count}} filaments",amsRequired:"AMS required",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"Save",sliceIn:"Save & Slice in {{slicer}}",disclaimer:"MakerWorld integration uses community-documented API endpoints. Bambuddy is not affiliated with or endorsed by MakerWorld or Bambu Lab.",lastImportSuccess:"Imported to your library",lastImportAlreadyInLibrary:"Already in your library",viewInLibrary:"View in File Manager",openInBambuStudio:"Open in Bambu Studio",openInOrcaSlicer:"Open in OrcaSlicer",importTo:"Import to file manager",recentImportsHeader:"Recent imports",phaseResolving:"Resolving",phaseDownloading:"Downloading",folderAuto:"MakerWorld (default)",importAll:"Import all",importAllProgress:"Importing {{current}}/{{total}}",openGallery:"Open image gallery",galleryPrev:"Previous image",galleryNext:"Next image",deleteImport:"Remove from library",importDeleting:"Removing…",importDeleted:"Removed from library",confirmDelete:"Remove {{filename}} from the library? This deletes the local file but the plate can be re-imported from MakerWorld.",errors:{resolveFailed:"Could not resolve that MakerWorld URL.",downloadFailed:"Download failed. Please try again.",deleteFailed:"Could not remove the file from the library."}},libraryTrash:{title:"Trash",headerButton:"Trash",headerTooltip:"View files moved to the trash",backToFiles:"Back to File Manager",subtitleAdmin:"Deleted files stay here for {{days}} days, then auto-delete. This view shows trashed files for all users.",subtitleUser:"Deleted files stay here for {{days}} days, then auto-delete.",loading:"Loading trash…",loadError:"Could not load the trash.",empty:"The trash is empty.",summary:"{{count}} files · {{size}}",emptyTrash:"Empty trash",restore:"Restore",purgeNow:"Delete now",autoPurgeIn:"Auto-deletes in {{when}}",days:"days",retentionLabel:"Auto-delete after",selectAll:"Select all",selectOne:"Select {{filename}}",selectionCount:"{{count}} selected",bulkRestore:"Restore selected",bulkPurge:"Delete selected",col:{filename:"File",folder:"Folder",size:"Size",deleted:"Moved to trash",autoPurge:"Auto-deletes",owner:"Owner",actions:"Actions"},confirm:{purgeTitle:"Delete permanently?",purgeBody:"{{filename}} will be deleted from disk and cannot be restored.",emptyTitle:"Empty the trash?",emptyBody:"All {{count}} files will be deleted from disk. This cannot be undone.",bulkPurgeTitle:"Delete selected files permanently?",bulkPurgeBody:"The {{count}} selected files will be deleted from disk and cannot be restored.",cta:"Delete permanently"},toast:{restored:"File restored.",restoreFailed:"Could not restore the file.",purged:"File deleted permanently.",purgeFailed:"Could not delete the file.",emptied:"Deleted {{count}} file(s) from trash.",emptyFailed:"Could not empty the trash.",retentionSaved:"Auto-delete set to {{days}} days.",retentionFailed:"Could not save retention setting.",bulkRestored:"Restored {{count}} file(s).",bulkPurged:"Deleted {{count}} file(s)."}},libraryPurge:{title:"Purge old files",headerButton:"Purge old",headerTooltip:"Bulk-move old files to trash",description:"Sweep old files out of your library in one shot. Files with a print history are aged by their last-printed date; files that were never printed are aged by their upload date.",ageLabel:"Move files older than",days:"days",includeNeverPrinted:"Include files that have never been printed",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"Checking how many files match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} files · {{size}} would move to trash",andMore:"…and {{count}} more",warning:"Trashed files still count against storage until the retention window expires. Empty the Trash afterwards to free disk immediately.",confirmCta:"Move {{count}} to trash",purging:"Moving to trash…",toast:{success:"Moved {{count}} file(s) to trash.",failed:"Could not purge files."}},libraryAutoPurge:{enableLabel:"Auto-purge old files",enableDescription:"Runs the admin purge once per day. Files go to Trash first — they are not deleted immediately.",ageLabel:"Auto-purge files older than",ageDescription:"Minimum 7 days, maximum 10 years. Uses the same age rule as the manual Purge button.",days:"days",includeNeverPrinted:"Include files that have never been printed",saveFailed:"Could not save auto-purge settings."},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},vme={nav:{printers:"Drucker",archives:"Archiv",queue:"Warteschlange",stats:"Statistiken",profiles:"Profile",maintenance:"Wartung",projects:"Projekte",inventory:"Filament",files:"Dateimanager",makerworld:"MakerWorld",notifications:"Benachrichtigungen",settings:"Einstellungen",system:"System",collapseSidebar:"Seitenleiste einklappen",expandSidebar:"Seitenleiste ausklappen",update:"Update",updateAvailable:"Update verfügbar: v{{version}}",updateAvailableBanner:"Version {{version}} ist verfügbar!",viewUpdate:"Update anzeigen",viewOnGithub:"Auf GitHub ansehen",keyboardShortcuts:"Tastaturkürzel (?)",switchToLight:"Zum hellen Modus wechseln",switchToDark:"Zum dunklen Modus wechseln",smartSwitches:"Smart Switches",logout:"Abmelden"},common:{save:"Speichern",saving:"Speichern...",cancel:"Abbrechen",delete:"Löschen",edit:"Bearbeiten",add:"Hinzufügen",close:"Schließen",confirm:"Bestätigen",loading:"Lädt...",error:"Fehler",success:"Erfolg",warning:"Warnung",enabled:"Aktiviert",disabled:"Deaktiviert",yes:"Ja",no:"Nein",on:"An",off:"Aus",all:"Alle",none:"Keine",search:"Suchen",filter:"Filtern",sort:"Sortieren",refresh:"Aktualisieren",download:"Herunterladen",upload:"Hochladen",uploading:"Hochladen...",uploadFailed:"Hochladen fehlgeschlagen",actions:"Aktionen",status:"Status",name:"Name",description:"Beschreibung",date:"Datum",time:"Zeit",hours:"Stunden",minutes:"Minuten",seconds:"Sekunden",days:"Tage",enable:"Aktivieren",disable:"Deaktivieren",permissions:"Berechtigungen",noPrinters:"Keine Drucker konfiguriert",noData:"Keine Daten verfügbar",linkNotFound:"Link nicht gefunden",required:"Erforderlich",optional:"Optional",dismiss:"Schließen",apply:"Anwenden",reset:"Zurücksetzen",export:"Exportieren",import:"Importieren",clear:"Leeren",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",noChange:"— Keine Änderung —",unchanged:"Unverändert",unassigned:"Nicht zugewiesen",unknown:"Unbekannt",unknownError:"Unbekannter Fehler",today:"Heute",tomorrow:"Morgen",asap:"Sofort",overdue:"Überfällig",now:"Jetzt",collapse:"Einklappen",expand:"Ausklappen",viewArchive:"Archiv anzeigen",viewInFileManager:"Im Dateimanager anzeigen",addedBy:"Hinzugefügt von {{username}}",prints:"Drucke",more:"+{{count}} weitere",ascending:"Aufsteigend",descending:"Absteigend",back:"Zurück",copy:"Kopieren",copied:"Kopiert!",printer:"Drucker",remove:"Entfernen",type:"Typ",print:"Drucken",rename:"Umbenennen",move:"Verschieben",create:"Erstellen",duplicate:"Duplizieren",left:"Links",right:"Rechts"},printers:{title:"Drucker",addPrinter:"Drucker hinzufügen",editPrinter:"Drucker bearbeiten",deletePrinter:"Drucker löschen",printerName:"Druckername",serialNumber:"Seriennummer",ipAddress:"IP-Adresse / Hostname",accessCode:"Zugangscode",model:"Modell",nozzleCount:"Düsenanzahl",autoArchive:"Automatische Archivierung",status:{available:"Verfügbar",idle:"Bereit",printing:"Druckt",paused:"Pausiert",offline:"Offline",problem:"Problem",error:"Fehler",finished:"Fertig",unknown:"Unbekannt"},temperatures:{nozzle:"Düse",bed:"Druckbett",chamber:"Kammer"},progress:"{{percent}}% abgeschlossen",timeRemaining:"Noch {{time}}",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',maintenanceOk:"Wartung OK",maintenanceWarning:"{{count}} Warnung",maintenanceWarning_plural:"{{count}} Warnungen",maintenanceDue:"{{count}} fällig",maintenanceDue_plural:"{{count}} fällig",sort:{name:"Name",status:"Status",model:"Modell",location:"Standort",ascending:"Aufsteigend sortieren",descending:"Absteigend sortieren"},cardSize:{small:"Kleine Karten",medium:"Mittlere Karten",large:"Große Karten",extraLarge:"Extra große Karten"},hideOffline:"Offline ausblenden",nextAvailable:"Nächster verfügbar",powerOn:"Einschalten",offlinePrintersWithPlugs:"Offline-Drucker mit Smart-Plugs",noPrintersConfigured:"Noch keine Drucker konfiguriert",search:"Drucker suchen...",noSearchResults:"Keine Drucker entsprechen deiner Suche oder deinen Filtern",filter:{allStatuses:"Alle Status",allLocations:"Alle Standorte"},readyToPrint:"Druckbereit",external:"Extern",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Druckarchive löschen",noLabel:"Keine Bezeichnung",printPreview:"Druckvorschau",width:"Breite",height:"Höhe",noObjectsFound:"Keine Objekte gefunden",objectsLoadedOnPrintStart:"Objekte werden beim Druckstart geladen",willBeSkipped:"Wird übersprungen",name:"Name",serialCannotBeChanged:"Seriennummer kann nicht geändert werden",locationHelp:"Dient zur Gruppierung von Druckern und zum Filtern von Warteschlangenaufträgen",wifiSignal:{veryWeak:"Sehr schwach",weak:"Schwach",fair:"Ausreichend",good:"Gut",excellent:"Ausgezeichnet"},maintenanceUpToDate:"Alle Wartungen aktuell - Klicken zum Anzeigen",chamberLightOn:"Kammerbeleuchtung einschalten",chamberLightOff:"Kammerbeleuchtung ausschalten",files:"Dateien",browseFiles:"Druckerdateien durchsuchen",autoOffAfterPrint:"Automatisches Ausschalten nach Druck",autoOffExecuted:"Auto-off wurde ausgeführt - Drucker einschalten zum Zurücksetzen",hmsErrors:"HMS-Fehler",viewHmsErrors:"{{count}} HMS-Fehler anzeigen",resume:"Fortsetzen",pause:"Pausieren",stop:"Stoppen",camera:"Kamera",skipObject:"Objekt überspringen",reconnect:"Neu verbinden",forceRefresh:"Aktualisierung erzwingen",forceRefreshSuccess:"Aktualisierung angefordert",mqttDebug:"MQTT-Debug",printerInformation:"Druckerinformationen",copyToClipboard:"Kopieren",copied:"Kopiert!",state:"Zustand",wifiSignalLabel:"WLAN-Signal",developerMode:"Entwicklermodus",enabled:"Aktiviert",disabled:"Deaktiviert",addedOn:"Hinzugefügt",sdCard:"SD-Karte",inserted:"Eingelegt",notInserted:"Nicht eingelegt",totalPrintHours:"Druckstunden",activeNozzle:"Aktiv: {{nozzle}} Düse",nozzleRack:"Düsenhalter",nozzleDocked:"Angedockt",nozzleMounted:"Montiert",nozzleActive:"Aktiv",nozzleIdle:"Inaktiv",nozzleDiameter:"Durchmesser",nozzleType:"Typ",nozzleStatus:"Status",nozzleFilament:"Filament",nozzleWear:"Verschleiß",nozzleMaxTemp:"Max Temp",nozzleSerial:"Seriennr.",nozzleHardenedSteel:"Gehärteter Stahl",nozzleStainlessSteel:"Edelstahl",nozzleTungstenCarbide:"Wolframkarbid",nozzleFlow:"Durchfluss",nozzleHighFlow:"High Flow",nozzleStandardFlow:"Standard",firmwareUpdate:"Firmware-Update",firmwareInstructions:"Gehen Sie auf dem Touchscreen des Druckers zu",firmwareNav:"Navigieren Sie zu",settings:"Einstellungen",firmware:"Firmware",discoverPrinters:"Drucker entdecken",searching:"Suche...",manualEntry:"Manuelle Eingabe",addFromCloud:"Aus Cloud hinzufügen",toast:{printerDeleted:"Drucker gelöscht",missingSpoolAssignment:"Druck gestartet auf {{printer}}. Fehlende Spulenzuordnung für: {{slots}}",printerAdded:"Drucker hinzugefügt",printerUpdated:"Drucker aktualisiert",failedToDelete:"Drucker konnte nicht gelöscht werden",failedToAdd:"Drucker konnte nicht hinzugefügt werden",failedToUpdate:"Drucker konnte nicht aktualisiert werden",commandSent:"Befehl gesendet",failedToSendCommand:"Befehl konnte nicht gesendet werden",turnedOn:"{{name}} eingeschaltet",failedToPowerOn:"{{name}} konnte nicht eingeschaltet werden",scriptTriggered:"Skript ausgelöst",printStopped:"Druck gestoppt",printPaused:"Druck pausiert",printResumed:"Druck fortgesetzt",referenceDeleted:"Referenz gelöscht",detectionAreaSaved:"Erkennungsbereich gespeichert",failedToRunScript:"Skript konnte nicht ausgeführt werden",failedToStopPrint:"Druck konnte nicht gestoppt werden",failedToPausePrint:"Druck konnte nicht pausiert werden",failedToResumePrint:"Druck konnte nicht fortgesetzt werden",failedToControlChamberLight:"Kammerbeleuchtung konnte nicht gesteuert werden",failedToSetSpeed:"Druckgeschwindigkeit konnte nicht eingestellt werden",failedToUpdateSetting:"Einstellung konnte nicht aktualisiert werden",failedToSkipObjects:"Objekte konnten nicht übersprungen werden",failedToRereadRfid:"RFID konnte nicht erneut gelesen werden",failedToCheckPlate:"Platte konnte nicht überprüft werden",failedToUpdateLabel:"Bezeichnung konnte nicht aktualisiert werden",failedToDeleteReference:"Referenz konnte nicht gelöscht werden",failedToSaveDetectionArea:"Erkennungsbereich konnte nicht gespeichert werden",plateCheckEnabled:"Plattenprüfung aktiviert",plateCheckDisabled:"Plattenprüfung deaktiviert",calibrationSaved:"Kalibrierung gespeichert!",calibrationFailed:"Kalibrierung fehlgeschlagen",rfidRereadInitiated:"RFID-Neueinlesen gestartet"},connection:{connected:"Verbunden",offline:"Offline"},plateStatus:{markCleared:"Platte als freigegeben markieren",cleared:"Platte freigegeben",notCleared:"Platte nicht freigegeben",inUse:"Platte in Benutzung"},queue:{inQueue:"{{count}} Druck in Warteschlange",inQueue_plural:"{{count}} Drucke in Warteschlange"},controls:"Steuerung",rfid:{reread:"RFID neu lesen"},bedJog:{title:"Druckbett bewegen",bed:"Bett",step:"Schritt (mm)",up:"Platte hoch",down:"Platte runter",disabledWhilePrinting:"Während des Drucks deaktiviert",notHomedTitle:"Drucker ist nicht referenziert",notHomedMessage:"Der Drucker wurde seit dem letzten Druck nicht referenziert. Führen Sie zuerst die automatische Referenzfahrt aus (parkt den Werkzeugkopf und referenziert dann X, Y und Z) oder bewegen Sie trotzdem — die Software-Endschalter werden dabei umgangen.",homeZ:"Automatische Referenzfahrt",moveAnyway:"Trotzdem bewegen",homingStarted:"Drucker wird automatisch referenziert…"},permission:{noAdd:"Sie haben keine Berechtigung, Drucker hinzuzufügen",noEdit:"Sie haben keine Berechtigung, Drucker zu bearbeiten",noDelete:"Sie haben keine Berechtigung, Drucker zu löschen",noControl:"Sie haben keine Berechtigung, Drucker zu steuern",noFiles:"Sie haben keine Berechtigung, auf Druckerdateien zuzugreifen",noAmsRfid:"Sie haben keine Berechtigung, AMS-RFID erneut zu lesen",noSmartPlugControl:"Sie haben keine Berechtigung, Smart Plugs zu steuern",noCamera:"Sie haben keine Berechtigung, Kameras anzuzeigen"},modal:{addTitle:"Drucker hinzufügen",editTitle:"Drucker bearbeiten",myPrinter:"Mein Drucker",selectModel:"Modell auswählen...",locationGroup:"Standort / Gruppe (optional)",locationPlaceholder:"z.B. Werkstatt, Büro, Keller",autoArchiveLabel:"Abgeschlossene Drucke automatisch archivieren",fromPrinterSettings:"Aus Druckereinstellungen",modelOptional:"Modell (optional)",saveChanges:"Änderungen speichern"},skipObjects:{tooltip:"Objekte überspringen",onlyWhilePrinting:"Objekte überspringen (nur während des Drucks)",requiresMultiple:"Objekte überspringen (erfordert 2+ Objekte)",title:"Objekte überspringen",matchIdsInfo:"IDs mit Drucker-Display abgleichen",printerShowsIds:"Der Druckerbildschirm zeigt Objekt-IDs auf der Bauplatte",skipSelected:"Ausgewählte überspringen",skipping:"Überspringe...",noObjectsSelected:"Keine Objekte ausgewählt",selectObjectsToSkip:"Wählen Sie Objekte aus, die Sie vom aktuellen Druck überspringen möchten",skipped:"übersprungen",objectsSkipped:"Objekte übersprungen",activeCount:"{{count}} aktiv",waitForLayer:"Warten Sie auf Schicht 2+ zum Überspringen von Objekten (aktuell Schicht {{layer}})",skip:"Überspringen",confirmTitle:"Objekt überspringen?",confirmMessage:'Möchten Sie "{{name}}" wirklich überspringen? Dies kann nicht rückgängig gemacht werden.'},confirm:{deleteTitle:"Drucker löschen",deleteMessage:'Möchten Sie "{{name}}" wirklich löschen? Alle Verbindungseinstellungen werden entfernt.',deleteArchivesNote:"Der gesamte Druckverlauf für diesen Drucker wird dauerhaft gelöscht.",keepArchivesNote:"Der Druckverlauf wird beibehalten, aber nicht mehr mit diesem Drucker verknüpft.",stopTitle:"Druck stoppen",stopMessage:'Möchten Sie den aktuellen Druck auf "{{name}}" wirklich stoppen? Der Druckauftrag wird abgebrochen.',stopButton:"Druck stoppen",pauseTitle:"Druck pausieren",pauseMessage:'Möchten Sie den aktuellen Druck auf "{{name}}" wirklich pausieren?',pauseButton:"Druck pausieren",resumeTitle:"Druck fortsetzen",resumeMessage:'Möchten Sie den Druck auf "{{name}}" fortsetzen?',resumeButton:"Druck fortsetzen",powerOnTitle:"Drucker einschalten",powerOnMessage:'Möchten Sie die Stromversorgung für "{{name}}" wirklich EINSCHALTEN?',powerOnButton:"Einschalten",powerOffTitle:"Drucker ausschalten",powerOffMessage:'Möchten Sie die Stromversorgung für "{{name}}" wirklich AUSSCHALTEN?',powerOffWarning:'WARNUNG: "{{name}}" druckt gerade! Möchten Sie die Stromversorgung wirklich AUSSCHALTEN? Dies unterbricht den Druck und kann den Drucker beschädigen.',powerOffButton:"Ausschalten"},bulk:{select:"Auswählen",selectAll:"Alle auswählen",selectByLocation:"Nach Standort auswählen",selected:"{{count}} ausgewählt",actions:{stop:"Stoppen",pause:"Pausieren",resume:"Fortsetzen",clearPlate:"Druckbett leeren",clearHMS:"Benachrichtigungen löschen"},confirm:{stopTitle:"{{count}} Drucke stoppen",stopMessage:"Dies wird aktive Drucke auf {{count}} Drucker(n) abbrechen. Diese Aktion kann nicht rückgängig gemacht werden.",stopButton:"Alle stoppen",pauseTitle:"{{count}} Drucke pausieren",pauseMessage:"Dies wird aktive Drucke auf {{count}} Drucker(n) pausieren.",pauseButton:"Alle pausieren",clearPlateTitle:"{{count}} Druckbetten leeren",clearPlateMessage:"Dies wird das Druckbett auf {{count}} Drucker(n) leeren und kann wartende Aufträge starten.",clearPlateButton:"Alle leeren"},success:"{{action}} auf {{count}} Drucker(n) abgeschlossen",partial:"{{succeeded}} erfolgreich, {{failed}} fehlgeschlagen",noneApplicable:"Keine ausgewählten Drucker sind im richtigen Zustand für diese Aktion",selectByState:"Nach Status auswählen"},discovery:{title:"Drucker entdecken",searching:"Suche...",scanning:"Scanne...",scanProgress:"Scanne... {{scanned}}/{{total}}",foundPrinters:"{{count}} Drucker gefunden",noPrintersFound:"Keine Drucker gefunden",noPrintersFoundSubnet:"Keine Drucker im angegebenen Subnetz gefunden.",noPrintersFoundNetwork:"Keine Drucker im Netzwerk gefunden.",allConfigured:"Alle erkannten Drucker sind bereits konfiguriert.",alreadyAdded:"Bereits hinzugefügt",select:"Auswählen",manualEntry:"Manuelle Eingabe",addFromCloud:"Aus Cloud hinzufügen",subnetToScan:"Zu scannendes Subnetz",dockerNote:"Docker erkannt. Geben Sie das Subnetz Ihres Druckers in CIDR-Notation ein. Erfordert network_mode: host in docker-compose.yml.",scanSubnet:"Subnetz nach Druckern scannen",discoverNetwork:"Drucker im Netzwerk suchen",scanningSubnet:"Subnetz wird nach Bambu-Druckern gescannt...",scanningNetwork:"Netzwerk wird gescannt...",serialRequired:"Seriennummer erforderlich",unknown:"Unbekannt",failedToStart:"Erkennung konnte nicht gestartet werden"},drying:{start:"Trocknung starten",stop:"Trocknung stoppen",temperature:"Temperatur",duration:"Dauer",hours:"Stunden",timeRemaining:"{{time}} verbleibend",active:"Trocknung",notSupported:"Trocknung nicht unterstützt",powerRequired:"AMS-Netzteil anschließen, um Trocknung zu aktivieren",startingDrying:"Trocknung wird gestartet...",stoppingDrying:"Trocknung wird gestoppt...",rotateTray:"Spule während der Trocknung drehen"},filaments:"Filamente",openCameraOverlay:"Kamera-Overlay öffnen",openCameraWindow:"Kamera in neuem Fenster öffnen",firmwareUpdateAvailable:"Firmware-Update verfügbar: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Aktuell",firmwareUpdateButton:"Update",plateDetection:{noPermission:"Sie haben keine Berechtigung, Drucker zu aktualisieren",enabledClick:"Plattenprüfung aktiviert - Klicken zum Deaktivieren",disabledClick:"Plattenprüfung deaktiviert - Klicken zum Aktivieren",manageCalibration:"Platten-Erkennungskalibrierung verwalten",calibrationRequired:"Kalibrierung erforderlich",calibrationInstructions:"Bitte stellen Sie sicher, dass die Druckplatte <strong>vollständig leer</strong> ist, und klicken Sie dann auf Kalibrieren.",calibrationDescription:"Die Kalibrierung erfasst ein Referenzbild der leeren Platte. Zukünftige Prüfungen vergleichen mit dieser Referenz, um Objekte zu erkennen.",calibrationTip:"<strong>Tipp:</strong> Sie können bis zu 5 Kalibrierungen für verschiedene Platten speichern. Das System verwendet automatisch die beste Übereinstimmung bei der Prüfung.",plateEmpty:"Platte erscheint leer",objectsDetected:"Objekte auf Platte erkannt",confidence:"Konfidenz",difference:"Differenz",analysisPreview:"Analysevorschau:",analysisLegend:"Grüner Rahmen = Erkennungsbereich, Rote Überlagerung = Unterschiede zur Kalibrierung",savedReferences:"Gespeicherte Referenzen ({{count}}/{{max}})",deleteReference:"Referenz löschen",labelPlaceholder:"Bezeichnung...",clickToEdit:"{{label}} - Zum Bearbeiten klicken",clickToAddLabel:"Zum Hinzufügen einer Bezeichnung klicken"},speed:{title:"Druckgeschwindigkeit",silent:"Leise (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Luftkanal-Modus",cooling:"Kühlen",heating:"Heizen"},noSdCard:"Keine SD",door:{open:"Offen",closed:"Zu"},fans:{partCooling:"Bauteilkühlung",auxiliary:"Hilfsventilator",chamber:"Kammerventilator"},clickToViewHmsErrors:"Klicken, um HMS-Fehler anzuzeigen",estimatedCompletion:"Geschätzte Fertigstellungszeit",plateNumber:"Platte {{number}}",slotOptions:"Slot-Optionen",amsPopup:{friendlyName:"AMS-Name",friendlyNamePlaceholder:"z. B. AMS-Anzeigename",serialNumber:"Seriennummer",firmwareVersion:"Firmware",save:"Speichern",clear:"Löschen",noEditPermission:"Sie haben keine Berechtigung, AMS-Einheiten umzubenennen"},firmwareModal:{title:"Firmware-Update",titleUpToDate:"Firmware-Info",currentVersion:"Aktuell:",latestVersion:"Neueste:",releaseNotes:"Versionshinweise",checkingPrereqs:"Prüfe Voraussetzungen...",sdCardReady:"SD-Karte bereit. Klicken Sie unten, um die Firmware hochzuladen.",uploadedSuccess:"Firmware auf SD-Karte hochgeladen!",applyInstructions:"So wenden Sie das Update auf Ihrem Drucker an:",step1:"Gehen Sie auf dem Touchscreen des Druckers zu <strong>Einstellungen</strong>",step2:"Navigieren Sie zu <strong>Firmware</strong>",step3:"Wählen Sie <strong>Update von SD-Karte</strong>",step4:"Das Update dauert 10-20 Minuten",done:"Fertig",starting:"Starte...",uploadFirmware:"Firmware hochladen",uploadFailed:"Upload fehlgeschlagen: {{error}}",uploadedToast:"Firmware hochgeladen! Starten Sie das Update vom Druckerbildschirm.",availableVersions:"Verfügbare Versionen",usable:"Installierbar",unavailable:"Nicht verfügbar",installed:"Installiert",newerBadge:"neuer",olderBadge:"älter",currentBadge:"aktuell"},accessCodePlaceholder:"Leer lassen, um den aktuellen zu behalten",roi:{title:"Erkennungsbereich (ROI)",xStart:"X-Start",yStart:"Y-Start",width:"Breite",height:"Höhe",instruction:"Passen Sie den Erkennungsbereich an, um sich auf die Druckplatte zu konzentrieren. Der grüne Rahmen in der Vorschau zeigt den aktuellen Bereich."},developerModeWarning:"Der Entwickler-LAN-Modus ist nicht aktiviert auf: {{names}}. Einige Funktionen funktionieren möglicherweise nicht.",howToEnable:"Aktivieren",incompatibleFile:"Diese Datei wurde für {{slicedFor}} geslicet, aber dieser Drucker ist ein {{printerModel}}",dropNotPrintable:"Nur .gcode- und .gcode.3mf-Dateien können gedruckt werden",dropToPrint:"Zum Drucken ablegen",cannotPrint:"Drucker beschäftigt"},archives:{title:"Druckarchiv",searchPlaceholder:"Archiv durchsuchen...",filterByPrinter:"Nach Drucker filtern",filterByStatus:"Nach Status filtern",sortBy:"Sortieren nach",sortNewest:"Neueste zuerst",sortOldest:"Älteste zuerst",sortName:"Name",sortDuration:"Dauer",sortLargest:"Größte zuerst",sortSmallest:"Kleinste zuerst",sortSize:"Größe",noArchives:"Keine Archive gefunden",noArchivesSearch:"Keine Archive entsprechen Ihrer Suche",originalPrintNotVisible:"Ursprünglicher Druck nicht sichtbar - versuchen Sie, die Filter zu löschen",noArchivesYet:"Noch keine Archive",prints:"Drucke",pagination:{showing:"Zeige",to:"bis",of:"von",show:"Zeige",page:"Seite",all:"Alle"},loadingArchives:"Lade Archive...",releaseToUpload:"Loslassen zum Hochladen",showAll:"Alle anzeigen",showFavoritesOnly:"Nur Favoriten anzeigen",gridView:"Rasteransicht",listView:"Listenansicht",calendarView:"Kalenderansicht",logView:"Druckprotokoll",manageTags:"Tags verwalten",showFailedPrints:"Fehlgeschlagene Drucke anzeigen",hideFailedPrints:"Fehlgeschlagene Drucke ausblenden",hideDuplicates:"Duplikate ausblenden",viewOriginalPrint:"Klicken, um den ursprünglichen Druck anzuzeigen (#{{id}})",printTime:"Druckzeit",filamentUsed:"Verbrauchtes Filament",cost:"Kosten",reprint:"Drucken",preview:"Vorschau",deleteArchive:"Archiv löschen",deleteConfirm:"Möchten Sie dieses Archiv wirklich löschen?",favorite:"Favorit",unfavorite:"Aus Favoriten entfernen",viewDetails:"Details anzeigen",status:{completed:"Abgeschlossen",failed:"Fehlgeschlagen",stopped:"Gestoppt"},toast:{source3mfAttached:"Quell-3MF angehängt: {{filename}}",failedUploadSource3mf:"Fehler beim Hochladen der Quell-3MF",source3mfRemoved:"Quell-3MF entfernt",failedRemoveSource3mf:"Fehler beim Entfernen der Quell-3MF",f3dAttached:"F3D angehängt: {{filename}}",failedUploadF3d:"Fehler beim Hochladen der F3D",f3dRemoved:"F3D entfernt",failedRemoveF3d:"Fehler beim Entfernen der F3D",timelapseAttached:"Zeitraffer angehängt: {{filename}}",timelapseAlreadyAttached:"Zeitraffer bereits angehängt",noMatchingTimelapse:"Kein passender Zeitraffer gefunden",failedScanTimelapse:"Fehler beim Suchen nach Zeitraffer",failedAttachTimelapse:"Fehler beim Anhängen des Zeitraffers",timelapseRemoved:"Zeitraffer entfernt",failedRemoveTimelapse:"Fehler beim Entfernen des Zeitraffers",timelapseUploaded:"Zeitraffer hochgeladen: {{filename}}",failedUploadTimelapse:"Fehler beim Hochladen des Zeitraffers",archiveDeleted:"Archiv gelöscht",failedDeleteArchive:"Fehler beim Löschen des Archivs",addedToFavorites:"Zu Favoriten hinzugefügt",removedFromFavorites:"Aus Favoriten entfernt",projectUpdated:"Projekt aktualisiert",failedUpdateProject:"Fehler beim Aktualisieren des Projekts",linkCopied:"Link in die Zwischenablage kopiert",failedCopyLink:"Fehler beim Kopieren des Links",photoDeleted:"Foto gelöscht",failedDeletePhoto:"Fehler beim Löschen des Fotos",failedDeleteArchives:"Fehler beim Löschen der Archive",failedUpdateFavorites:"Fehler beim Aktualisieren der Favoriten",exportDownloaded:"Export heruntergeladen",exportFailed:"Export fehlgeschlagen"},menu:{print:"Drucken",schedule:"Planen",openInBambuStudio:"Im Slicer öffnen",slice:"Slicen",externalLink:"Externer Link",viewOnMakerWorld:"Auf MakerWorld ansehen",preview3d:"3D-Vorschau",viewTimelapse:"Zeitraffer ansehen",scanForTimelapse:"Nach Zeitraffer suchen",uploadTimelapse:"Zeitraffer hochladen",removeTimelapse:"Zeitraffer entfernen",downloadSource3mf:"Quell-3MF herunterladen",uploadSource3mf:"Quell-3MF hochladen",replaceSource3mf:"Quell-3MF ersetzen",removeSource3mf:"Quell-3MF entfernen",uploadF3d:"F3D hochladen",replaceF3d:"F3D ersetzen",downloadF3d:"F3D herunterladen",removeF3d:"F3D entfernen",download:"Herunterladen",copyDownloadLink:"Download-Link kopieren",qrCode:"QR-Code",viewPhotos:"Fotos ansehen",viewPhotosCount:"Fotos ansehen ({{count}})",projectPage:"Projektseite",addToFavorites:"Zu Favoriten hinzufügen",removeFromFavorites:"Aus Favoriten entfernen",edit:"Bearbeiten",goToProject:"Zum Projekt: {{name}}",addToProject:"Zu Projekt hinzufügen",removeFromProject:"Aus Projekt entfernen",loading:"Laden...",noProjectsAvailable:"Keine Projekte verfügbar",searchProjects:"Projekte suchen…",select:"Auswählen",deselect:"Abwählen",delete:"Löschen"},permission:{noReprint:"Sie haben keine Berechtigung, dieses Archiv erneut zu drucken",noAddToQueue:"Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen",noUpdateArchives:"Sie haben keine Berechtigung, Archive zu aktualisieren",noUploadFiles:"Sie haben keine Berechtigung, Dateien hochzuladen",noDownload:"Sie haben keine Berechtigung, Archive herunterzuladen",noCopyLink:"Sie haben keine Berechtigung, Download-Links zu kopieren",noDelete:"Sie haben keine Berechtigung, dieses Archiv zu löschen",noCreate:"Sie haben keine Berechtigung, Archive zu erstellen"},platePicker:{title:"Platte zur Vorschau auswählen",hint:"Dieses Archiv enthält mehrere Platten. Wähle eine, um sie im GCode-Viewer zu öffnen.",plateLabel:"Platte {{index}}",objectCount:"{{count}} Objekt",objectCount_plural:"{{count}} Objekte",noGcode:"Dieses Archiv enthält keinen geschnittenen G-Code zur Vorschau. Öffne es zuerst in Bambu Studio zum Slicen."},card:{previousPlate:"Vorherige Platte",nextPlate:"Nächste Platte",plateNumber:"Platte {{index}}",moreOptions:"Rechtsklick für mehr Optionen",addToFavorites:"Zu Favoriten hinzufügen",removeFromFavorites:"Aus Favoriten entfernen",cancelled:"abgebrochen",failed:"fehlgeschlagen",duplicate:"Duplikat",duplicateTitle:"Dieses Modell wurde bereits zuvor gedruckt",openSource3mf:"Quell-3MF in Bambu Studio öffnen (Rechtsklick für mehr Optionen)",downloadF3d:"Fusion 360 Designdatei herunterladen",viewTimelapse:"Zeitraffer ansehen",viewPhoto:"1 Foto ansehen",viewPhotos:"{{count}} Fotos ansehen",openFolder:"Ordner öffnen: {{name}}",slicedFile:"Geslicte Datei - druckbereit",sourceFile:"Nur Quelldatei - keine AMS-Zuordnung verfügbar",gcode:"GCODE",source:"QUELLE",project:"Projekt: {{name}}",estimated:"Geschätzt: {{time}}",actual:"Tatsächlich: {{time}}",accuracy:"Genauigkeit: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} Schicht",layers:"{{count}} Schichten",object:"{{count}} Objekt",objects:"{{count}} Objekte",slicedFor:"Geslict für {{model}}",uploadedBy:"Hochgeladen von",noPermissionReprint:"Sie haben keine Berechtigung, erneut zu drucken",noFileForReprint:"Keine 3MF-Datei verfügbar — die Datei konnte beim Aufzeichnen des Drucks nicht vom Drucker heruntergeladen werden",noPermissionEdit:"Sie haben keine Berechtigung, Archive zu bearbeiten",noPermissionDelete:"Sie haben keine Berechtigung, Archive zu löschen",reprint:"Drucken",schedulePrint:"Druck planen",schedule:"Planen",openInBambuStudio:"Im Slicer öffnen",openInBambuStudioToSlice:"Im Slicer öffnen zum Slicen",slice:"Slicen",externalLink:"Externer Link",makerWorld:"MakerWorld: {{designer}}",viewProject:"Projekt ansehen",noExternalLink:"Kein externer Link",preview3d:"3D-Vorschau",download:"Herunterladen",edit:"Bearbeiten",delete:"Löschen"},modal:{deleteArchive:"Archiv löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.',deleteButton:"Löschen",removeSource3mf:"Quell-3MF entfernen",removeSource3mfConfirm:'Möchten Sie die Quell-3MF-Datei wirklich von "{{name}}" entfernen? Die ursprüngliche Slicer-Projektdatei wird gelöscht.',removeButton:"Entfernen",removeF3d:"F3D entfernen",removeF3dConfirm:'Möchten Sie die Fusion 360 Designdatei wirklich von "{{name}}" entfernen?',removeTimelapse:"Zeitraffer entfernen",removeTimelapseConfirm:'Möchten Sie das Zeitraffervideo wirklich von "{{name}}" entfernen?',timelapse:"{{name}} - Zeitraffer",selectTimelapse:"Zeitraffer auswählen",selectTimelapseDesc:"Keine automatische Übereinstimmung gefunden. Wählen Sie den Zeitraffer für diesen Druck:",deleteArchives:"Archive löschen",deleteArchivesConfirm:"Möchten Sie wirklich {{count}} Archiv(e) löschen? Diese Aktion kann nicht rückgängig gemacht werden.",deleteCount:"{{count}} löschen"},page:{title:"Archive",printsCount:"{{filtered}} von {{total}} Drucken",dropFilesHere:".3mf-Dateien hier ablegen",releaseToUpload:"Loslassen zum Hochladen",only3mfSupported:"Nur .3mf-Dateien werden unterstützt",close:"Schließen",selected:"{{count}} ausgewählt",selectAll:"Alle auswählen",tags:"Tags",project:"Projekt",favorite:"Favorit",delete:"Löschen",toggledFavorites:"Favoriten für {{count}} Archiv(e) umgeschaltet",failedUpdateFavorites:"Fehler beim Aktualisieren der Favoriten",archivesDeleted:"{{count}} Archiv(e) gelöscht",failedDeleteArchives:"Fehler beim Löschen der Archive",photoDeleted:"Foto gelöscht",failedDeletePhoto:"Fehler beim Löschen des Fotos"},list:{name:"Name",printer:"Drucker",date:"Datum",size:"Größe",actions:"Aktionen",hasTimelapse:"Hat Zeitraffer"},log:{date:"Datum",printName:"Druckname",printer:"Drucker",user:"Benutzer",status:"Status",duration:"Dauer",filament:"Filament",allPrinters:"Alle Drucker",allUsers:"Alle Benutzer",allStatuses:"Alle Status",cancelled:"Abgebrochen",skipped:"Übersprungen",dateFrom:"Von",dateTo:"Bis",noEntries:"Keine Druckprotokolleinträge gefunden",showing:"{{count}} von {{total}} Einträgen",rowsPerPage:"Zeilen",page:"Seite",prev:"Zurück",next:"Weiter",clearLog:"Protokoll löschen",clearLogTitle:"Druckprotokoll löschen",clearLogConfirm:"Alle Druckprotokolleinträge werden dauerhaft gelöscht. Archive und Warteschlangeneinträge sind nicht betroffen. Diese Aktion kann nicht rückgängig gemacht werden. Sind Sie sicher?",clearLogButton:"Alle löschen",cleared:"{{count}} Protokolleinträge gelöscht",clearFailed:"Druckprotokoll konnte nicht gelöscht werden"}},queue:{title:"Druckwarteschlange",subtitle:"Planen und verwalten Sie Ihre Druckaufträge",addToQueue:"Zur Warteschlange hinzufügen",print:"Drucken",reprint:"Erneut drucken",schedulePrint:"Druck planen",editQueueItem:"Warteschlangeneintrag bearbeiten",printToPrinters:"Auf {{count}} Druckern drucken",queueToPrinters:"Zu {{count}} Druckern hinzufügen",queueSelectedPlates:"{{count}} Platten in die Warteschlange",selectAllPlates:"Alle {{count}} Platten auswählen",deselectAll:"Alle abwählen",printQueued:"Druck in Warteschlange",itemsQueued:"{{count}} Einträge in Warteschlange",sending:"Wird gesendet...",sendingProgress:"Sende {{current}}/{{total}}...",adding:"Wird hinzugefügt...",addingProgress:"Füge hinzu {{current}}/{{total}}...",savingProgress:"Speichere {{current}}/{{total}}...",clearQueue:"Warteschlange leeren",clearHistory:"Verlauf löschen",emptyQueue:"Warteschlange ist leer",position:"Position",scheduledTime:"Geplante Zeit",moveUp:"Nach oben",moveDown:"Nach unten",startNow:"Jetzt starten",printingInProgress:"Druck läuft...",viewArchive:"Archiv anzeigen",viewInFileManager:"Im Dateimanager anzeigen",itemCount:"{{count}} Element",itemCount_plural:"{{count}} Elemente",dragToReorder:"Ziehen zum Neuordnen (nur Sofort)",reorderHint:"Position betrifft nur Sofort-Elemente. Geplante Elemente werden zur festgelegten Zeit ausgeführt.",sjf:{label:"SJF",tooltip:"Kürzester Auftrag zuerst — Scheduler bevorzugt kürzere Drucke"},addedBy:"Hinzugefügt von {{name}}",nextInQueue:"Nächster in der Warteschlange",clearPlateSuccess:"Druckplatte freigegeben — bereit für nächsten Druck",plateNumber:"Platte {{index}}",quantity:"Menge",quantityHint:"Erstellt {{count}} Warteschlangeneinträge",activeBatches:"Aktive Stapel",batchProgress:"{{completed}} von {{total}} abgeschlossen",cancelBatch:"Verbleibende abbrechen",batchCancelled:"Verbleibende Stapeleinträge abgebrochen",cancelBatchConfirmTitle:"Stapel abbrechen",cancelBatchConfirmMessage:"Alle verbleibenden ausstehenden Einträge in diesem Stapel abbrechen?",batch:"Stapel",sections:{currentlyPrinting:"Aktuell druckend",queued:"In Warteschlange",history:"Verlauf"},status:{pending:"Ausstehend",waiting:"Wartend",printing:"Druckt",paused:"Pausiert",completed:"Abgeschlossen",failed:"Fehlgeschlagen",skipped:"Übersprungen",cancelled:"Abgebrochen"},summary:{printing:"Druckt",queued:"In Warteschlange",totalTime:"Gesamte Wartezeit",totalWeight:"Gesamtgewicht der Warteschlange",history:"Verlauf"},filter:{allPrinters:"Alle Drucker",unassigned:"Nicht zugewiesen",allStatus:"Alle Status",allLocations:"Alle Standorte",any:"Beliebig"},sort:{byPosition:"Nach Position sortieren",byName:"Nach Name sortieren",byPrinter:"Nach Drucker sortieren",bySchedule:"Nach Zeitplan sortieren",byDate:"Nach Datum sortieren",ascendingOldest:"Aufsteigend (älteste zuerst)",descendingNewest:"Absteigend (neueste zuerst)"},badges:{staged:"Bereitgestellt",requiresPrevious:"Erfordert vorherigen Erfolg",autoPowerOff:"Automatisch ausschalten",gcodeInjection:"G-code"},empty:{title:"Keine Drucke geplant",description:'Planen Sie einen Druck von der Archivseite über die Option "Planen" im Kontextmenü oder ziehen Sie Dateien hierher.'},time:{asap:"Sofort",overdue:"Überfällig",now:"Jetzt",lessThanMinute:"In weniger als einer Minute",inMinutes:"In {{count}} Min",inHours:"In {{count}} Stunden"},actions:{stopPrint:"Druck stoppen",startPrint:"Druck starten",requeue:"Erneut einreihen"},bulkEdit:{title:"{{count}} Element bearbeiten",title_plural:"{{count}} Elemente bearbeiten",description:"Nur geänderte Einstellungen werden auf ausgewählte Elemente angewendet.",printer:"Drucker",noChange:"— Keine Änderung —",queueOptions:"Warteschlangenoptionen",staged:"Bereitgestellt (manueller Start)",autoPowerOff:"Nach Druck automatisch ausschalten",requirePrevious:"Vorherigen Erfolg erfordern",printOptions:"Druckoptionen",bedLevelling:"Bett-Nivellierung",flowCalibration:"Fluss-Kalibrierung",vibrationCalibration:"Vibrations-Kalibrierung",layerInspection:"Erste-Schicht-Prüfung",timelapse:"Zeitraffer",useAms:"AMS verwenden",applyChanges:"Änderungen übernehmen",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",selected:"{{count}} ausgewählt",editSelected:"Ausgewählte bearbeiten",cancelSelected:"Ausgewählte abbrechen"},confirm:{cancelTitle:"Geplanten Druck abbrechen",cancelMessage:'Möchten Sie "{{name}}" wirklich abbrechen?',stopTitle:"Druck stoppen",stopMessage:'Möchten Sie den aktuellen Druck "{{name}}" wirklich stoppen? Der Druckauftrag wird am Drucker abgebrochen.',removeTitle:"Aus Verlauf entfernen",removeMessage:'Möchten Sie "{{name}}" wirklich aus dem Warteschlangenverlauf entfernen?',clearHistoryTitle:"Verlauf löschen",clearHistoryMessage:"Möchten Sie alle {{count}} Element(e) aus dem Verlauf entfernen?",cancelButton:"Druck abbrechen",stopButton:"Druck stoppen",thisPrint:"diesen Druck",thisItem:"dieses Element"},toast:{cancelled:"Warteschlangenelement abgebrochen",cancelFailed:"Element konnte nicht abgebrochen werden",removed:"Warteschlangenelement entfernt",removeFailed:"Element konnte nicht entfernt werden",stopped:"Druck gestoppt",stopFailed:"Druck konnte nicht gestoppt werden",released:"Druck in Warteschlange freigegeben",startFailed:"Druck konnte nicht gestartet werden",reorderFailed:"Warteschlange konnte nicht neu geordnet werden",historyCleared:"{{count}} Verlaufselement(e) gelöscht",clearHistoryFailed:"Verlauf konnte nicht gelöscht werden",updateFailed:"Elemente konnten nicht aktualisiert werden",bulkCancelled:"{{count}} Element(e) abgebrochen",bulkCancelFailed:"Elemente konnten nicht abgebrochen werden"},timeline:{listView:"Liste",timelineView:"Zeitstrahl",unassigned:"Nicht zugewiesen",noData:"Keine geplanten Drucke für diesen Tag",allDoneBy:"Alle Drucke voraussichtlich fertig um {{time}}",staged:"Bereitgestellt",filterAll:"Alle anzeigen",filterPrinting:"Druckend",filterQueued:"Warteschlange",time:{anyMoment:"jeden Moment",minutesLeft:"{{minutes}}m übrig",hoursLeft:"{{hours}}h übrig",hoursMinutesLeft:"{{hours}}h {{minutes}}m übrig"},day:{previous:"Vorheriger Tag",next:"Nächster Tag",today:"Heute"}},permissions:{noStopPrint:"Sie haben keine Berechtigung, Drucke zu stoppen",noStartPrint:"Sie haben keine Berechtigung, Drucke zu starten",noEdit:"Sie haben keine Berechtigung, dieses Warteschlangenelement zu bearbeiten",noCancel:"Sie haben keine Berechtigung, dieses Warteschlangenelement abzubrechen",noRequeue:"Sie haben keine Berechtigung, Elemente erneut einzureihen",noRemove:"Sie haben keine Berechtigung, dieses Warteschlangenelement zu entfernen",noClearHistory:"Sie haben keine Berechtigung, den gesamten Verlauf zu löschen",noEditItems:"Sie haben keine Berechtigung, Warteschlangenelemente zu bearbeiten",noCancelItems:"Sie haben keine Berechtigung, Warteschlangenelemente abzubrechen"}},backgroundDispatch:{unknownFile:"Unbekannte Datei",unknownPrinter:"Unbekannter Drucker",startingPrints:"Starte Drucke",progressSummary:"{{complete}}/{{total}} abgeschlossen • Geplant: {{dispatched}} • In Bearbeitung: {{processing}}",expandDetails:"Dispatch-Details ausklappen",collapseDetails:"Dispatch-Details einklappen",dismissToast:"Dispatch-Hinweis schließen",cancelDispatchJob:"Dispatch-Job abbrechen",cancel:"Abbrechen",cancelling:"Wird abgebrochen…",awaitingPrinter:"Warte auf Drucker…",status:{dispatched:"Geplant",processing:"In Bearbeitung",completed:"Abgeschlossen",failed:"Fehlgeschlagen",cancelled:"Abgebrochen"},toast:{cancellingUpload:"Upload wird abgebrochen...",cancelled:"Dispatch abgebrochen",cancelFailed:"Dispatch konnte nicht abgebrochen werden",completeWithFailures:"Background Dispatch abgeschlossen: {{completed}} erfolgreich, {{failed}} fehlgeschlagen",completeSuccess:"Background Dispatch abgeschlossen: {{completed}} erfolgreich",printStartedRemaining:"{{completed}} Druck(e) gestartet, {{remaining}} weitere werden gesendet..."}},stats:{title:"Dashboard",subtitle:"Widgets zum Neuanordnen ziehen. Auf das Augensymbol klicken zum Ausblenden.",overview:"Übersicht",totalPrints:"Gesamtdrucke",successRate:"Erfolgsrate",totalPrintTime:"Gesamtdruckzeit",printTime:"Druckzeit",totalFilament:"Gesamtverbrauch Filament",filamentUsed:"Filamentverbrauch",filamentCost:"Filamentkosten",totalCost:"Gesamtkosten",energyUsed:"Energieverbrauch",energyCost:"Energiekosten",energyWarmingUpTooltip:"Die Energieerfassung sammelt noch stündliche Snapshots. Zeitraumwerte werden genau, sobald vor dem gewählten Bereich mindestens ein Snapshot vorliegt. Frühe Werte können zu niedrig sein.",averagePrintTime:"Durchschnittliche Druckzeit",printsPerDay:"Drucke pro Tag",byPrinter:"Nach Drucker",printsByPrinter:"Drucke nach Drucker",byMaterial:"Nach Material",byMonth:"Nach Monat",last7Days:"Letzte 7 Tage",last30Days:"Letzte 30 Tage",last90Days:"Letzte 90 Tage",allTime:"Gesamt",quickStats:"Schnellstatistiken",printActivity:"Druckaktivität",filamentTypes:"Filamenttypen",filamentTrends:"Filamenttrends",failureAnalysis:"Fehleranalyse",timeAccuracy:"Zeitgenauigkeit",successful:"Erfolgreich:",failed:"Fehlgeschlagen:",perfectEstimate:"100% = perfekte Schätzung",noTimeAccuracyData:"Noch keine Zeitgenauigkeitsdaten",noFilamentData:"Keine Filamentdaten verfügbar",noPrinterData:"Keine Druckerdaten verfügbar",noPrintData:"Keine Druckdaten verfügbar",noPrintDataLast30Days:"Keine Druckdaten in den letzten 30 Tagen",failureReasons:"Fehlerursachen",topFailureReasons:"Häufigste Fehlerursachen",failedPrintsCount:"{{failed}} / {{total}} Drucke fehlgeschlagen",lastWeekRate:"Letzte Woche: {{rate}}%",resetLayout:"Layout zurücksetzen",recalculateCosts:"Kosten neu berechnen",recalculateCostsHint:"Alle Archivkosten mit aktuellen Filamentpreisen neu berechnen",exportStats:"Statistiken exportieren",exportAsCsv:"Als CSV exportieren",exportAsExcel:"Als Excel exportieren",hiddenCount:"{{count}} ausgeblendet",exportDownloaded:"Export heruntergeladen",exportFailed:"Export fehlgeschlagen",layoutReset:"Layout zurückgesetzt",recalculatedCosts:"Kosten für {{count}} Archive neu berechnet",recalculateFailed:"Kosten konnten nicht neu berechnet werden",loadingStats:"Statistiken werden geladen...",noPermissionResetLayout:"Sie haben keine Berechtigung, das Layout zurückzusetzen",noPermissionRecalculate:"Sie haben keine Berechtigung, Kosten neu zu berechnen",noPrintDataInRange:"Keine Druckdaten im ausgewählten Zeitraum",periodFilament:"Filamentverbrauch",periodCost:"Kosten",avgPerPrint:"Durchschnitt pro Druck",usageOverTime:"Verbrauch im Zeitverlauf",filamentByWeight:"Gewicht",printDuration:"Druckdauer",printerUtilization:"Druckerauslastung",filamentSuccess:"Erfolg nach Material",printHabits:"Druckgewohnheiten",printTimeOfDay:"Druck-Tageszeit",colorDistribution:"Farbverteilung",noColorData:"Keine Farbdaten verfügbar",records:"Rekorde",longestPrint:"Längster Druck",heaviestPrint:"Schwerster Druck",mostExpensivePrint:"Teuerster Druck",busiestDay:"Aktivster Tag",successStreak:"Erfolgsserie",streakPrint:"aufeinanderfolgender Druck",streakPrints:"{{count}} aufeinanderfolgende Drucke",printerStats:"Druckerstatistiken",hours:"Stunden",avgPrints:"Ø Drucke",noArchiveData:"Keine Druckdaten verfügbar",filamentByTime:"Zeitverlauf",avgWeight:"Ø Gewicht",avgTime:"Ø Zeit",filamentByPrints:"Drucke",timeframe:{today:"Heute","this-week":"Diese Woche","this-month":"Dieser Monat","last-7":"Letzte 7 Tage","last-30":"Letzte 30 Tage","last-90":"Letzte 90 Tage","this-year":"Dieses Jahr","all-time":"Gesamt",custom:"Benutzerdefiniert",from:"Von",to:"Bis"},allUsers:"Alle Benutzer",noUser:"Kein Benutzer (System)",filterByUser:"Nach Benutzer filtern"},maintenance:{title:"Wartung",overview:"Übersicht",allOk:"Alle Wartungen aktuell",dueCount:"{{count}} Aufgabe fällig",dueCount_plural:"{{count}} Aufgaben fällig",warningCount:"{{count}} Warnung",warningCount_plural:"{{count}} Warnungen",totalPrintTime:"Gesamtdruckzeit",nextMaintenance:"Nächste Wartung",nothingDue:"Nichts fällig",tasks:"Aufgaben",lastPerformed:"Zuletzt durchgeführt",interval:"Intervall",hoursRemaining:"{{hours}}h verbleibend",hoursOverdue:"{{hours}}h überfällig",markDone:"Als erledigt markieren",performMaintenance:"Wartung durchführen",history:"Verlauf",noHistory:"Kein Wartungsverlauf",editPrintHours:"Druckstunden bearbeiten",currentHours:"Aktuelle Stunden",statusTab:"Status",settingsTab:"Einstellungen",overdueCount:"{{count}} überfällig",dueSoonCount:"{{count}} bald fällig",dueSoon:"Bald fällig",allGood:"Alles in Ordnung",overdueBy:"Überfällig um {{duration}}",dueIn:"Fällig in {{duration}}",timeLeft:"{{duration}} verbleibend",day:"1 Tag",days:"{{count}} Tage",week:"1 Woche",weeks:"{{count}} Wochen",month:"1 Monat",months:"{{count}} Monate",year:"1 Jahr",maintenanceTypes:"Wartungstypen",maintenanceTypesDescription:"Systemtypen und Ihre benutzerdefinierten Wartungsaufgaben",addCustomType:"Benutzerdefinierten Typ hinzufügen",restoreDefaults:"Standardaufgaben wiederherstellen",intervalType:"Intervalltyp",intervalValue:"Intervall ({{type}})",icon:"Symbol",documentationLink:"Dokumentationslink (optional)",assignToPrinters:"Druckern zuweisen",selectAtLeastOnePrinter:"Wählen Sie mindestens einen Drucker",addType:"Typ hinzufügen",custom:"Benutzerdefiniert",printHours:"Druckstunden",calendarDays:"Kalendertage",exampleName:"z.B. HEPA-Filter ersetzen",viewDocumentation:"Dokumentation anzeigen",timeBasedInterval:"Zeitbasiertes Intervall",intervalOverrides:"Intervall-Überschreibungen",intervalOverridesDescription:"Intervalle für bestimmte Drucker anpassen",assignedToPrinters:"Druckern zugewiesen:",noPrintersAssigned:"Keine Drucker zugewiesen",addPrinterShort:"Hinzufügen:",printersAssignedClick:"{{count}} Drucker zugewiesen - klicken zum Verwalten",removeFromPrinter:"Von diesem Drucker entfernen",types:{lubricateCarbonRods:"Karbonstäbe schmieren",lubricateRails:"Linearschienen schmieren",cleanNozzle:"Düse/Hotend reinigen",checkBelts:"Riemenspannung prüfen",cleanBuildPlate:"Druckbett reinigen",checkExtruder:"Extruderzahnräder prüfen",checkCooling:"Kühlungslüfter prüfen",generalInspection:"Allgemeine Inspektion",cleanCarbonRods:"Kohlenstoffstangen reinigen",lubricateSteelRods:"Stahlstangen schmieren",cleanSteelRods:"Stahlstangen reinigen",cleanLinearRails:"Linearschienen reinigen",checkPtfeTube:"PTFE-Schlauch prüfen",replaceHepaFilter:"HEPA-Filter ersetzen",replaceCarbonFilter:"Aktivkohlefilter ersetzen",lubricateLeftNozzleRail:"Linke Düsenschiene schmieren"},maintenanceComplete:"Wartung als abgeschlossen markiert",typeUpdated:"Wartungstyp aktualisiert",typeDeleted:"Wartungstyp gelöscht",defaultsRestored:"{{count}} Standardaufgabe(n) wiederhergestellt",printHoursUpdated:"Druckstunden aktualisiert",printerAssigned:"Drucker zugewiesen",printerRemoved:"Drucker entfernt",deleteTypeConfirm:'"{{name}}" löschen?',deleteSystemTypeTitle:"Standard-Wartungsaufgabe löschen?",deleteSystemTypeMessage:'Möchten Sie die Standard-Wartungsaufgabe "{{name}}" wirklich löschen?',noPermissionUpdate:"Sie haben keine Berechtigung, Wartungselemente zu aktualisieren",noPermissionPerform:"Sie haben keine Berechtigung, Wartungen durchzuführen",noPermissionEditTypes:"Sie haben keine Berechtigung, Wartungstypen zu bearbeiten",noPermissionDeleteTypes:"Sie haben keine Berechtigung, Wartungstypen zu löschen",noPermissionEditHours:"Sie haben keine Berechtigung, Druckstunden zu bearbeiten",noPermissionRemovePrinter:"Sie haben keine Berechtigung, Druckerzuweisungen zu entfernen",noPermissionAssignPrinter:"Sie haben keine Berechtigung, Drucker zuzuweisen",noPermissionEditIntervals:"Sie haben keine Berechtigung, Intervalle zu bearbeiten",configureSettings:"Wartungstypen und Intervalle konfigurieren"},settings:{title:"Einstellungen",general:"Allgemein",tabs:{general:"Allgemein",smartPlugs:"Smart Plugs",notifications:"Benachrichtigungen",queue:"Workflow",filament:"Filament",network:"Netzwerk",apiKeys:"API-Schlüssel",virtualPrinter:"Virtueller Drucker",spoolbuddy:"SpoolBuddy",failureDetection:"Fehlererkennung",users:"Authentifizierung",backup:"Sicherung",emailAuth:"E-Mail-Authentifizierung",ldap:"LDAP",twoFa:"Zwei-Faktor-Auth",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy-Geräte",infoBody:"SpoolBuddy-Kioske registrieren sich automatisch per Heartbeat. Ein Gerät hier abmelden, wenn es nicht mehr verwendet wird oder wenn ein veralteter Eintrag nach einem Daemon-Absturz übrig geblieben ist.",duplicatesTitle:"{{count}} Geräte registriert",duplicatesBody:"Die Kiosk-Oberfläche verwendet nur das zuerst registrierte Gerät. Falls eines davon ein veralteter Doppeleintrag nach einem Absturz ist, kann es hier entfernt werden — ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.",empty:"Noch keine SpoolBuddy-Geräte registriert.",online:"Online",offline:"Offline",unregister:"Abmelden",unregisterSuccess:"Gerät abgemeldet",unregisterError:"Gerät konnte nicht abgemeldet werden",confirmTitle:"SpoolBuddy-Gerät abmelden?",confirmBody:'Dies entfernt „{{hostname}}" ({{deviceId}}) aus der Datenbank. Ein laufendes Gerät registriert sich beim nächsten Heartbeat automatisch neu.',ipAddress:"IP-Adresse",firmware:"Firmware",lastSeen:"Zuletzt gesehen",daemonUptime:"Daemon-Laufzeit",systemUptime:"System-Laufzeit",never:"nie",nfc:"NFC",scale:"Waage",cpuTemp:"CPU-Temp.",memory:"Speicher",disk:"Festplatte",update:"Aktualisieren",updateConfirmTitle:"Spoolbuddy-Daemon aktualisieren?",updateConfirmBody:'Software-Update auf „{{hostname}}" auslösen? Der Daemon startet nach dem Update neu.',restartBrowser:"Browser neu starten",restartBrowserConfirmTitle:"Kiosk-Browser neu starten?",restartBrowserConfirmBody:'Kiosk-Browser auf „{{hostname}}" neu starten? Die Anzeige wird kurz schwarz.',restartDaemon:"Daemon neu starten",restartDaemonConfirmTitle:"Spoolbuddy-Daemon neu starten?",restartDaemonConfirmBody:'Spoolbuddy-Daemon auf „{{hostname}}" neu starten? Das Gerät ist für einige Sekunden offline.',reboot:"Neustart",rebootConfirmTitle:"Gerät neu starten?",rebootConfirmBody:'„{{hostname}}" neu starten? Das Gerät ist für etwa eine Minute offline.',shutdown:"Herunterfahren",shutdownConfirmTitle:"Gerät herunterfahren?",shutdownConfirmBody:'„{{hostname}}" herunterfahren? Physischer Zugriff ist nötig, um es wieder einzuschalten.',commandConfirm:"Bestätigen",commandQueued:"Befehl eingereiht",commandError:"Befehl konnte nicht gesendet werden"},ldap:{title:"LDAP-Authentifizierung",enabledDesc:"LDAP-Authentifizierung ist aktiviert",disabledDesc:"LDAP-Authentifizierung ist deaktiviert",disabledHint:"LDAP-Einstellungen unten konfigurieren und speichern, dann aktivieren.",enabled:"LDAP-Authentifizierung aktiviert",disabled:"LDAP-Authentifizierung deaktiviert",feature1:"Benutzer können sich mit LDAP-Anmeldedaten anmelden",feature2:"Lokales Admin-Konto bleibt als Fallback erhalten",feature3:"LDAP-Gruppen werden bei der Anmeldung BamBuddy-Gruppen zugeordnet",serverConfig:"LDAP-Server-Konfiguration",serverUrl:"Server-URL",serverUrlHint:"Verwenden Sie ldap:// für Standard oder ldaps:// für SSL-Verbindungen",security:"Sicherheit",securityHint:"StartTLS aktualisiert eine einfache Verbindung auf TLS. LDAPS verwendet TLS von Anfang an.",bindDn:"Bind-DN (Dienstkonto)",bindPassword:"Bind-Passwort",searchBase:"Such-Basis-DN",userFilter:"Benutzer-Suchfilter",userFilterHint:"{username} wird durch den Anmeldenamen ersetzt. Verwenden Sie (uid={username}) für OpenLDAP.",autoProvision:"Benutzer automatisch anlegen",autoProvisionHint:"Automatisch ein BamBuddy-Konto bei der ersten LDAP-Anmeldung erstellen",defaultGroup:"Standardgruppe",defaultGroupNone:"— Keine (kein Fallback) —",defaultGroupHint:"Fallback-Gruppe, die zugewiesen wird, wenn sich ein LDAP-Benutzer authentifiziert, aber in keiner zugeordneten LDAP-Gruppe enthalten ist. Leer lassen, um nicht zugeordnete Benutzer ohne Berechtigungen zu belassen.",groupMapping:"Gruppenzuordnung (JSON)",groupMappingHint:"LDAP-Gruppen-DNs BamBuddy-Gruppen zuordnen. Verfügbare Gruppen: ",testConnection:"Verbindung testen",settingsSaved:"LDAP-Einstellungen gespeichert",errors:{serverRequired:"LDAP-Server-URL ist erforderlich",searchBaseRequired:"Such-Basis-DN ist erforderlich",enableAuthFirst:"Authentifizierung zuerst aktivieren",configureLdapFirst:"LDAP-Einstellungen zuerst speichern"}},email:{smtpSettings:"SMTP-Konfiguration",smtpHost:"SMTP-Server",smtpPort:"SMTP-Port",security:"Sicherheit",authentication:"Authentifizierung",username:"Benutzername",password:"Passwort",fromEmail:"Absender-E-Mail",fromName:"Absendername",testConnection:"SMTP-Verbindung testen",testRecipient:"Test-Empfänger-E-Mail",sendTest:"Test-E-Mail senden",sending:"Wird gesendet...",save:"Einstellungen speichern",saving:"Wird gespeichert...",advancedAuth:"Erweiterte Authentifizierung",advancedAuthEnabled:"Erweiterte Authentifizierung ist aktiviert",advancedAuthEnabledDesc:"E-Mail-basierte Benutzerverwaltungsfunktionen sind aktiv. Neue Benutzer erhalten automatisch generierte Passwörter per E-Mail und können ihr Passwort über die Passwort vergessen Funktion zurücksetzen.",advancedAuthDisabled:"Erweiterte Authentifizierung ist deaktiviert",advancedAuthDisabledDesc:"Aktivieren Sie die erweiterte Authentifizierung, um E-Mail-basierte Funktionen für die Benutzerverwaltung zu aktivieren.",enable:"Aktivieren",disable:"Deaktivieren",feature1:"Passwörter werden automatisch generiert und an neue Benutzer gesendet",feature2:"Benutzer können sich mit Benutzername oder E-Mail anmelden",feature3:"Passwort vergessen Funktion ist verfügbar",feature4:"Administratoren können Benutzerpasswörter per E-Mail zurücksetzen",errors:{requiredFields:"Bitte füllen Sie alle Pflichtfelder aus",usernameRequired:"Benutzername ist erforderlich, wenn Authentifizierung aktiviert ist",enterTestEmail:"Bitte geben Sie eine Test-E-Mail-Adresse ein",smtpServerAndEmail:"Bitte füllen Sie SMTP-Server und Absender-E-Mail aus, bevor Sie testen",usernamePasswordRequired:"Benutzername und Passwort sind erforderlich, wenn Authentifizierung aktiviert ist",configureSmtpFirst:"Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen",enableAuthFirst:"Bitte aktivieren Sie zuerst die Authentifizierung, um E-Mail-basierte Funktionen nutzen zu können."},success:{settingsSaved:"SMTP-Einstellungen erfolgreich gespeichert"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"Keine (Port 25)"},authOptions:{enabled:"Aktiviert",disabled:"Deaktiviert"}},appearance:"Erscheinungsbild",notifications:"Benachrichtigungen",smartPlugs:"Smart Plugs",spoolman:"Spoolman",updates:"Updates",language:"Sprache",languageDescription:"Wählen Sie Ihre bevorzugte Sprache",theme:"Design",themeLight:"Hell",themeDark:"Dunkel",themeSystem:"System",defaultView:"Standardansicht",defaultViewDescription:"Seite, die beim Öffnen der App angezeigt wird",checkForUpdates:"Nach Updates suchen",autoUpdate:"Automatische Updates",currentVersion:"Aktuelle Version",latestVersion:"Neueste Version",upToDate:"Sie sind auf dem neuesten Stand",updateAvailable:"Update verfügbar",notificationLanguage:"Benachrichtigungssprache",notificationLanguageDescription:"Sprache für Push-Benachrichtigungen",bedCooledThreshold:"Bett-Abkühlung Schwellenwert",bedCooledThresholdDescription:"Temperatur, unter der das Bett nach einem Druck als abgekühlt gilt",userNotificationsEnabled:"Benutzerbenachrichtigungen",userNotificationsEnabledDescription:"Aktiviert das Benutzerbenachrichtigungsmenü und E-Mail-Benachrichtigungen für Druckereignisse. Erfordert Erweiterte Authentifizierung.",userNotificationsDisabledHint:"Erweiterte Authentifizierung aktivieren, um Benutzerbenachrichtigungen zu verwenden.",notificationProviders:"Benachrichtigungsanbieter",addProvider:"Anbieter hinzufügen",editProvider:"Anbieter bearbeiten",providerType:"Anbietertyp",testNotification:"Testbenachrichtigung",testSuccess:"Testbenachrichtigung erfolgreich gesendet",testFailed:"Testbenachrichtigung konnte nicht gesendet werden",quietHours:"Ruhezeiten",quietHoursDescription:"Keine Störungen während dieser Zeiten",quietHoursStart:"Beginn",quietHoursEnd:"Ende",events:{title:"Benachrichtigungsereignisse",printStart:"Druck gestartet",printComplete:"Druck abgeschlossen",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",printProgress:"Fortschrittsmeldungen",printProgressDescription:"Bei 25%, 50%, 75% benachrichtigen",printerOffline:"Drucker offline",printerError:"Druckerfehler",filamentLow:"Filament niedrig",maintenanceDue:"Wartung fällig",maintenanceDueDescription:"Benachrichtigen, wenn Wartung erforderlich"},smartPlug:{title:"Smart Plugs",add:"Smart Plug hinzufügen",edit:"Smart Plug bearbeiten",name:"Name",ipAddress:"IP-Adresse",linkedPrinter:"Verknüpfter Drucker",autoOn:"Automatisch einschalten",autoOnDescription:"Einschalten beim Druckstart",autoOff:"Automatisch ausschalten",autoOffDescription:"Ausschalten nach Druckende",offDelay:"Ausschaltverzögerung",offDelayMinutes:"Minuten nach Druck",offDelayTemp:"Wenn Düse unter Temperatur",currentState:"Aktueller Status",turnOn:"Einschalten",turnOff:"Ausschalten"},filamentTracking:"Filament-Verfolgung",filamentTrackingDesc:"Wählen Sie, wie Sie Ihre Filamentspulen verfolgen möchten. Sie können das integrierte Inventar oder einen externen Spoolman-Server verwenden.",filamentChecks:"Filament-Prüfungen",disableFilamentWarnings:"Filament-Warnungen deaktivieren",disableFilamentWarningsDesc:"Keine Warnungen über unzureichendes Filament beim Drucken oder Einreihen anzeigen",preferLowestFilament:"Niedrigsten Filamentrest bevorzugen",preferLowestFilamentDesc:"Bei mehreren passenden Spulen die mit dem geringsten Restfilament verwenden",trackingModeBuiltIn:"Integriertes Inventar",trackingModeBuiltInDesc:"RFID-Erkennung und Verbrauchserfassung inklusive",trackingModeSpoolmanDesc:"Externer Filament-Management-Server",builtInFeatureRfid:"Erkennt automatisch Bambu Lab RFID-Spulen im AMS",builtInFeatureUsage:"Erfasst den Filamentverbrauch pro Druck",builtInFeatureCatalog:"Spulen, Farben und K-Faktor-Profile verwalten",builtInFeatureThirdParty:"Drittanbieter-Spulen können Inventarspulen zugewiesen werden",amsSyncButton:"Gewichte vom AMS synchronisieren",amsSyncTitle:"Spulengewichte vom AMS synchronisieren",amsSyncMessage:"Alle Inventar-Spulengewichte werden mit den aktuellen AMS-Restwerten der verbundenen Drucker überschrieben. Verwenden Sie dies zur Wiederherstellung beschädigter Gewichtsdaten. Drucker müssen online sein.",amsSyncing:"Synchronisiere...",amsSyncSuccess:"{{synced}} Spule(n) synchronisiert, {{skipped}} übersprungen",amsSyncError:"Synchronisierung der Gewichte vom AMS fehlgeschlagen",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL Ihres Spoolman-Servers (z.B. http://localhost:7912)",spoolmanConnected:"Verbunden",spoolmanDisconnected:"Nicht verbunden",status:"Status",connect:"Verbinden",disconnect:"Trennen",howSyncWorks:"So funktioniert die Synchronisierung",syncInfoRfidOnly:"Nur offizielle Bambu Lab Spulen mit RFID werden synchronisiert",syncInfoAutoCreate:"Neue Spulen werden bei der ersten Synchronisierung automatisch in Spoolman erstellt",syncInfoThirdPartySkipped:"Nicht-Bambu-Lab-Spulen (Drittanbieter, nachgefüllt) werden übersprungen",linkingExistingSpools:"Vorhandene Spulen verknüpfen",linkingExistingSpoolsDesc:'Um vorhandene Spoolman-Spulen mit Ihrem AMS zu verknüpfen, fahren Sie über einen AMS-Slot und klicken Sie auf "Mit Spoolman verknüpfen".',syncMode:"Synchronisierungsmodus",syncModeAuto:"Automatisch",syncModeManual:"Nur manuell",syncModeAutoDesc:"AMS-Daten werden automatisch synchronisiert, wenn Änderungen erkannt werden",syncModeManualDesc:"Nur bei manueller Auslösung synchronisieren",syncAmsData:"AMS-Daten synchronisieren",syncAmsDataDesc:"AMS-Daten des Druckers manuell mit Spoolman synchronisieren",allPrinters:"Alle Drucker",noDefaultPrinter:"Kein Standard (jedes Mal fragen)",sidebarOrder:"Seitenleisten-Reihenfolge",saveThumbnails:"Vorschaubilder speichern",captureFinishPhoto:"Abschlussfoto aufnehmen",noPrintersConfigured:"Keine Drucker konfiguriert",archiveMode:{always:"Immer Archiveintrag erstellen",never:"Nie Archiveintrag erstellen",ask:"Jedes Mal fragen"},checkForUpdatesLabel:"Nach Updates suchen",checkPrinterFirmware:"Drucker-Firmware prüfen",includeBetaUpdates:"Beta-Versionen einschließen",includeBetaUpdatesDesc:"Über Beta- und Vorabversionen bei der Updateprüfung benachrichtigen",enableRetry:"Wiederholung aktivieren",homeAssistantDescription:"Smart Plugs über Home Assistant steuern",environmentManagedLabel:"(Umgebungsvariable)",autoEnabledViaEnv:"Automatisch über Umgebungsvariablen aktiviert",urlFromEnvReadOnly:"Wert wird über HA_URL Umgebungsvariable gesetzt (schreibgeschützt)",tokenFromEnvReadOnly:"Wert wird über HA_TOKEN Umgebungsvariable gesetzt (schreibgeschützt)",mqttConnectedTo:"Verbunden mit",prometheusDescription:"Druckerdaten im Prometheus-Format bereitstellen",noSmartPlugsTitle:"Keine Smart Plugs konfiguriert",noSmartPlugsDescription:"Fügen Sie einen Tasmota-basierten Smart Plug hinzu, um den Energieverbrauch zu verfolgen und die Stromsteuerung zu automatisieren.",noProvidersTitle:"Keine Anbieter konfiguriert",noProvidersDescription:"Fügen Sie einen Anbieter hinzu, um Benachrichtigungen zu erhalten.",noTemplatesAvailable:"Keine Vorlagen verfügbar. Starten Sie das Backend neu, um Standardvorlagen zu laden.",apiPermissionView:"Druckerstatus und Warteschlange anzeigen",apiPermissionEdit:"Elemente zur Druckwarteschlange hinzufügen und entfernen",apiKeysEmptyTitle:"Keine API-Schlüssel",apiKeysEmptyDescription:"Erstellen Sie einen API-Schlüssel zur Integration mit externen Diensten.",noUsersFound:"Keine Benutzer gefunden",noGroupsFound:"Keine Gruppen gefunden",noGroupsAvailable:"Keine Gruppen verfügbar",passwordsDoNotMatch:"Passwörter stimmen nicht überein",systemGroupWarning:"System-Gruppennamen können nicht geändert werden",authDisabledTitle:"Authentifizierung ist deaktiviert",authDisabledFeature1:"Anmeldung zum Zugriff auf das System erforderlich",authDisabledFeature2:"Mehrere Benutzer mit gruppenbasierten Berechtigungen erstellen",authDisabledFeature3:"Zugriff mit über 50 granularen Berechtigungen steuern",userHasCreated:"Dieser Benutzer hat erstellt:",userItemsQuestion:"Was möchten Sie mit diesen Elementen tun?",deleteUserConfirm:"Möchten Sie diesen Benutzer wirklich löschen?",actionCannotBeUndone:"Diese Aktion kann nicht rückgängig gemacht werden.",addFirstSmartPlug:"Ersten Smart Plug hinzufügen",providers:"Anbieter",log:"Protokoll",testAll:"Alle testen",testResults:"Testergebnisse",testPassedCount:"{{count}} bestanden",testFailedCount:"{{count}} fehlgeschlagen",messageTemplates:"Nachrichtenvorlagen",messageTemplatesDescription:"Passen Sie Benachrichtigungen für jedes Ereignis an.",apiKeys:"API-Schlüssel",apiKeysDescription:"Erstellen Sie API-Schlüssel für externe Integrationen und Webhooks.",createKey:"Schlüssel erstellen",apiKeyCreated:"API-Schlüssel erfolgreich erstellt",apiKeyCopyWarning:"Kopieren Sie diesen Schlüssel jetzt - er wird nicht mehr angezeigt!",useInApiBrowser:"Im API-Browser verwenden",createNewApiKey:"Neuen API-Schlüssel erstellen",keyName:"Schlüsselname",keyNamePlaceholder:"z.B. Home Assistant, OctoPrint",readStatus:"Status lesen",readStatusDescription:"Druckerstatus und Warteschlange anzeigen",manageQueue:"Warteschlange verwalten",manageQueueDescription:"Elemente zur Druckwarteschlange hinzufügen und entfernen",controlPrinter:"Drucker steuern",controlPrinterDescription:"Drucke pausieren, fortsetzen und stoppen",unnamedKey:"Unbenannter Schlüssel",lastUsed:"Zuletzt verwendet",read:"Lesen",control:"Steuern",createFirstKey:"Ersten Schlüssel erstellen",webhookEndpoints:"Webhook-Endpunkte",webhookApiKeyHint:"Verwenden Sie Ihren API-Schlüssel im X-API-Key-Header.",webhook:{getAllStatus:"Alle Druckerstatus abrufen",getSpecificStatus:"Spezifischen Druckerstatus abrufen",addToQueue:"Zur Druckwarteschlange hinzufügen",pausePrint:"Druck pausieren",resumePrint:"Druck fortsetzen",stopPrint:"Druck stoppen"},apiBrowser:"API-Browser",apiBrowserDescription:"Erkunden und testen Sie alle verfügbaren API-Endpunkte.",apiKeyForTesting:"API-Schlüssel zum Testen",apiKeyPlaceholder:"Fügen Sie hier Ihren API-Schlüssel ein, um authentifizierte Endpunkte zu testen...",apiKeyHint:"Dieser Schlüssel wird als X-API-Key-Header mit Anfragen gesendet.",deleteApiKeyTitle:"API-Schlüssel löschen",deleteApiKeyMessage:"Möchten Sie diesen API-Schlüssel wirklich löschen? Alle Integrationen, die diesen Schlüssel verwenden, funktionieren nicht mehr.",deleteKey:"Schlüssel löschen",amsDisplayThresholds:"AMS-Anzeigeschwellenwerte",amsThresholdsDescription:"Konfigurieren Sie Farbschwellenwerte für AMS-Feuchtigkeits- und Temperaturanzeigen.",humidity:"Luftfeuchtigkeit",goodGreen:"Gut (grün)",fairOrange:"Mittel (orange)",aboveFairBad:"Über dem mittleren Schwellenwert wird rot angezeigt (schlecht)",fairAlsoDryingThreshold:"Dieser Schwellenwert wird auch für die automatische Trocknung verwendet",temperature:"Temperatur",goodBlue:"Gut (blau)",aboveFairHot:"Über dem mittleren Schwellenwert wird rot angezeigt (heiß)",historyRetention:"Verlaufsaufbewahrung",keepSensorHistory:"Sensorverlauf behalten für",historyRetentionDescription:"Ältere Feuchtigkeits- und Temperaturdaten werden automatisch gelöscht",defaultPrintOptions:"Standard-Druckoptionen",defaultPrintOptionsDescription:"Standardwerte für Druckoptionen bei neuen Drucken festlegen. Diese können im Druckdialog pro Druck überschrieben werden.",defaultBedLevelling:"Bett-Nivellierung",defaultBedLevellingDesc:"Bett vor dem Druck automatisch nivellieren",defaultFlowCali:"Fluss-Kalibrierung",defaultFlowCaliDesc:"Extrusionsfluss kalibrieren",defaultVibrationCali:"Vibrationskalibrierung",defaultVibrationCaliDesc:"Ringing-Artefakte reduzieren",defaultLayerInspect:"Erste-Schicht-Inspektion",defaultLayerInspectDesc:"KI-Inspektion der ersten Schicht",defaultTimelapse:"Zeitraffer",defaultTimelapseDesc:"Zeitraffervideo aufnehmen",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Druckplatte-Bestätigung",requirePlateClear:"Druckplatte-Bestätigung erforderlich",requirePlateClearDescription:'Wenn aktiviert, wartet der Scheduler auf eine Druckplatten-Bestätigung pro Drucker, bevor geplante Drucke auf Druckern mit abgeschlossenen Aufträgen gestartet werden. Wenn dies deaktiviert ist, werden auch das Druckplatten-Status-Badge und die Schaltfläche "Druckplatte als freigegeben markieren" auf den Druckerkarten ausgeblendet.',gcodeInjection:"G-code Injection",gcodeInjectionDescription:'Konfigurieren Sie benutzerdefinierten G-code, der am Anfang und/oder Ende von Drucken für Auto-Print-Systeme wie Farmloop, SwapMod, AutoClear und Printflow 3D eingefügt wird. Snippets werden pro Druckermodell konfiguriert und angewendet, wenn "G-code einfügen" bei einem Warteschlangen-Element aktiviert ist.',gcodeInjectionNoPrinters:"Keine Drucker gefunden. Fügen Sie Drucker hinzu, um G-code-Snippets zu konfigurieren.",gcodeStartLabel:"Start G-code",gcodeEndLabel:"End G-code",gcodeStartPlaceholder:"G-code, der vor dem Druckstart eingefügt wird...",gcodeEndPlaceholder:"G-code, der nach dem Druckende angefügt wird...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Automatische Trocknung",queueDryingDescription:"AMS-Filament automatisch trocknen, wenn der Drucker zwischen Warteschlangen-Drucken im Leerlauf ist. Verwendet den Feuchtigkeitsschwellenwert oben.",queueDryingEnabled:"Automatische Trocknung aktivieren",queueDryingEnabledDescription:"AMS-Trocknung automatisch starten, wenn der Drucker im Leerlauf ist und die Feuchtigkeit über dem Schwellenwert liegt",queueDryingBlock:"Auf Trocknung warten",queueDryingBlockDescription:"Druckwarteschlange blockieren, bis die Trocknung abgeschlossen ist. Wenn aus, haben Drucke Vorrang.",ambientDryingEnabled:"Umgebungstrocknung",ambientDryingEnabledDescription:"Filament auf inaktiven Druckern automatisch trocknen, wenn die Luftfeuchtigkeit den Schwellenwert überschreitet — auch ohne Warteschlange.",dryingPresets:"Trocknungsvoreinstellungen",dryingPresetsDescription:"Temperatur und Dauer pro Filamenttyp. AMS 2 Pro verwendet niedrigere Temperaturen, AMS-HT unterstützt höhere.",dryingFilament:"Filament",printModal:"Druckdialog",expandCustomMapping:"Benutzerdefinierte Zuordnung standardmäßig erweitern",expandCustomMappingDescription:"Bei Druck auf mehrere Drucker die AMS-Zuordnung pro Drucker erweitert anzeigen",authentication:"Authentifizierung",authEnabledDescription:"Ihre Instanz ist mit Benutzerauthentifizierung gesichert",authDisabledDescription:"Aktivieren Sie die Anmeldepflicht und verwalten Sie den Benutzerzugriff",authDisabledMessage:"Aktivieren Sie die Authentifizierung, um Benutzerkonten zu erstellen, Berechtigungen zu verwalten und Ihre Bambuddy-Instanz zu sichern.",enableAuthentication:"Authentifizierung aktivieren",currentUser:"Aktueller Benutzer",changePassword:"Passwort ändern",admin:"Admin",users:"Benutzer",addUser:"Benutzer hinzufügen",groups:"Gruppen",addGroup:"Gruppe hinzufügen",system:"System",noDescription:"Keine Beschreibung",userCount:"{{count}} Benutzer",permissionCount:"{{count}} Berechtigungen",createUser:"Benutzer erstellen",username:"Benutzername",enterUsername:"Benutzername eingeben",password:"Passwort",enterPassword:"Passwort eingeben (min. 6 Zeichen)",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Passwort bestätigen",viewReleaseOnGitHub:"Release auf GitHub anzeigen",turnAllPlugsOn:"Alle Stecker einschalten",turnAllPlugsOff:"Alle Stecker ausschalten",clearNotificationLogs:"Benachrichtigungsprotokolle löschen",clearLogsMessage:"Dadurch werden alle Benachrichtigungsprotokolle, die älter als 30 Tage sind, dauerhaft gelöscht. Diese Aktion kann nicht rückgängig gemacht werden.",clearLogs:"Protokolle löschen",resetUiPreferences:"UI-Einstellungen zurücksetzen",resetUiPreferencesMessage:"Dadurch werden alle UI-Einstellungen auf Standardwerte zurückgesetzt: Seitenleisten-Reihenfolge, Theme, Dashboard-Layout, Ansichtsmodi und Sortiereinstellungen. Ihre Drucker, Archive und Servereinstellungen werden NICHT beeinträchtigt. Die Seite wird nach dem Löschen neu geladen.",resetPreferences:"Einstellungen zurücksetzen",deleteGroupTitle:"Gruppe löschen",deleteGroupMessage:"Möchten Sie diese Gruppe wirklich löschen? Benutzer in dieser Gruppe verlieren diese Berechtigungen.",deleteGroup:"Gruppe löschen",disableAuthenticationTitle:"Authentifizierung deaktivieren",disableAuthenticationMessage:"Möchten Sie die Authentifizierung wirklich deaktivieren? Dadurch wird Ihre Bambuddy-Instanz ohne Anmeldung zugänglich. Alle Benutzer bleiben in der Datenbank, aber die Authentifizierung wird deaktiviert.",disableAuthentication:"Authentifizierung deaktivieren",configureBambuddy:"Bambuddy konfigurieren",systemDefault:"Systemstandard",archiveSettings:"Archiv-Einstellungen",newWindow:"Neues Fenster",embeddedOverlay:"Eingebettetes Overlay",preferredSlicer:"Bevorzugter Slicer",preferredSlicerDescription:"Wähle die Slicer-Anwendung zum Öffnen von Dateien",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev haben bekannte CLI-Bugs, die das Slicen vieler von BambuStudio erstellter 3MF-Dateien blockieren — siehe Upstream-Issues #12426 (Segfault bei bemalten Multi-Extruder-Dateien) und #13386 (zu strikte Parameter-Range-Validierung). Bis die Upstream-Fixes verfügbar sind, wird Bambu Studio empfohlen.",useSlicerApi:"Slicer-API verwenden",useSlicerApiDescription:'Wenn aktiv, öffnen "Slice"-Aktionen das in-App Slicer-Modal und rufen den Slicer-API-Sidecar. Aus (Standard): Übergabe an den Desktop-Slicer per URI-Schema.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer Sidecar-URL",bambuStudioApiUrl:"Bambu Studio Sidecar-URL",slicerApiUrlDescription:"URL des Slicer-API-Sidecar-Containers. Leer lassen, um die SLICER_API_URL- bzw. BAMBU_STUDIO_API_URL-Umgebungsvariablen zu nutzen.",externalCameras:"Externe Kameras",costTracking:"Kostenverfolgung",printsOnly:"Nur Drucke",totalConsumption:"Gesamtverbrauch",dataManagement:"Datenverwaltung",storageUsage:"Speichernutzung",storageUsageDescription:"Aufschlüsselung der Datennutzung nach Kategorie",storageUsageTotal:"Gesamt",storageUsageErrors:"Fehler",storageUsageOtherBreakdown:"Sonstiges (enthält statische Assets, Skripte und Konfigurationsdateien)",storageUsageSystem:"System",storageUsageData:"Daten",storageUsageUnavailable:"Speichernutzungsinformationen nicht verfügbar",clearNotificationLogsDescription:"Benachrichtigungsprotokolle älter als 30 Tage löschen",resetUiPreferencesDescription:"Seitenleisten-Reihenfolge, Theme, Ansichtsmodi und Layout-Einstellungen zurücksetzen. Drucker, Archive und Einstellungen werden nicht beeinflusst.",enableHomeAssistant:"Home Assistant aktivieren",enableMqtt:"MQTT aktivieren",useTls:"TLS verwenden",enableMetricsEndpoint:"Metrik-Endpunkt aktivieren",availableMetrics:"Verfügbare Metriken",editUser:"Benutzer bearbeiten",deleteUserTitle:"Benutzer löschen",groupName:"Gruppenname",leaveEmptyForAnonymous:"Leer lassen für anonym",leaveEmptyForNoAuth:"Leer lassen für keine Authentifizierung",enterNewPassword:"Neues Passwort eingeben",confirmNewPassword:"Neues Passwort bestätigen",enterGroupName:"Gruppenname eingeben",enterDescriptionOptional:"Beschreibung eingeben (optional)",enterCurrentPassword:"Aktuelles Passwort eingeben",enterNewPasswordMin6:"Neues Passwort eingeben (min. 6 Zeichen)",toast:{keyCopied:"Schlüssel in Zwischenablage kopiert",copyFailed:"Schlüssel konnte nicht kopiert werden",keyAddedToBrowser:"Schlüssel zum API-Browser hinzugefügt",clearLogsFailed:"Protokolle konnten nicht gelöscht werden",uiPreferencesReset:"UI-Einstellungen zurückgesetzt. Wird neu geladen...",authDisabled:"Authentifizierung erfolgreich deaktiviert",authDisableFailed:"Authentifizierung konnte nicht deaktiviert werden",apiKeyCreated:"API-Schlüssel erstellt",apiKeyDeleted:"API-Schlüssel gelöscht",userCreated:"Benutzer erfolgreich erstellt",userUpdated:"Benutzer erfolgreich aktualisiert",userDeleted:"Benutzer erfolgreich gelöscht",groupCreated:"Gruppe erfolgreich erstellt",groupUpdated:"Gruppe erfolgreich aktualisiert",groupDeleted:"Gruppe erfolgreich gelöscht",fillRequiredFields:"Bitte füllen Sie alle erforderlichen Felder aus",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein",enterGroupName:"Bitte geben Sie einen Gruppennamen ein",settingsSaved:"Einstellungen gespeichert",noPermissionUpdate:"Sie haben keine Berechtigung, Einstellungen zu ändern",cameraSettingsSaved:"Kamera-Einstellungen gespeichert",enterCameraUrl:"Bitte geben Sie eine Kamera-URL ein",passwordChanged:"Passwort erfolgreich geändert",connectionFailed:"Verbindung fehlgeschlagen",testFailed:"Test fehlgeschlagen",cameraConnected:"Kamera verbunden{{resolution}}"},testConnection:"Verbindung testen",catalog:{spoolCatalog:"Spulenkatalog",spoolCatalogDescription:"Leerspulengewichte nach Marke/Typ. Wird für die automatische Gewichtssuche beim Hinzufügen von Spulen verwendet.",searchCatalog:"Katalog durchsuchen...",addNewEntry:"Neuen Eintrag hinzufügen",namePlaceholder:"Name (z.B. Bambu Lab - Plastik)",weight:"Gewicht",type:"Typ",default:"Standard",custom:"Benutzerdefiniert",noMatch:"Keine Einträge entsprechen Ihrer Suche",empty:"Keine Einträge im Katalog",deleteEntry:"Eintrag löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',resetCatalog:"Katalog zurücksetzen",resetConfirm:"Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Einträge werden entfernt.",loadFailed:"Spulenkatalog konnte nicht geladen werden",nameWeightRequired:"Name und Gewicht sind erforderlich",entryAdded:"Eintrag hinzugefügt",addFailed:"Eintrag konnte nicht hinzugefügt werden",entryUpdated:"Eintrag aktualisiert",updateFailed:"Eintrag konnte nicht aktualisiert werden",entryDeleted:"Eintrag gelöscht",deleteFailed:"Eintrag konnte nicht gelöscht werden",resetSuccess:"Katalog auf Standardwerte zurückgesetzt",resetFailed:"Katalog konnte nicht zurückgesetzt werden",exported:"{{count}} Einträge exportiert",imported:"{{added}} Einträge importiert ({{skipped}} übersprungen)",importFailed:"Import fehlgeschlagen: ungültiges JSON-Format",exportTooltip:"Katalog als JSON exportieren",importTooltip:"Katalog aus JSON importieren",resetTooltip:"Auf Standardwerte zurücksetzen",selectedCount:"{{count}} ausgewählt",deleteSelected:"Ausgewählte löschen",bulkDeleteConfirm:"Möchten Sie {{count}} Einträge wirklich löschen?",bulkDeleted:"{{count}} Einträge gelöscht",bulkDeleteFailed:"Fehler beim Löschen der Einträge"},colorCatalog:{title:"Farbkatalog",description:"Filamentfarben nach Hersteller/Material. Wird für die automatische Farbsuche beim Hinzufügen von Spulen verwendet.",searchColors:"Farben durchsuchen...",allManufacturers:"Alle Hersteller",addNewColor:"Neue Farbe hinzufügen",manufacturer:"Hersteller",colorName:"Farbname",hex:"Hex",materialOptional:"Material (optional)",showing:"{{filtered}} von {{total}} Farben angezeigt",noMatch:"Keine Farben entsprechen Ihrer Suche",empty:"Keine Farben im Katalog",deleteColor:"Farbe löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',resetCatalog:"Farbkatalog zurücksetzen",resetConfirm:"Katalog auf Standardwerte zurücksetzen? Alle benutzerdefinierten Farben werden entfernt.",sync:"Sync",starting:"Starten...",syncTooltip:"Von FilamentColors.xyz synchronisieren (2000+ Farben)",loadFailed:"Farbkatalog konnte nicht geladen werden",fieldsRequired:"Hersteller, Farbname und Hex-Farbe sind erforderlich",colorAdded:"Farbe hinzugefügt",addFailed:"Farbe konnte nicht hinzugefügt werden",colorUpdated:"Farbe aktualisiert",updateFailed:"Farbe konnte nicht aktualisiert werden",colorDeleted:"Farbe gelöscht",deleteFailed:"Farbe konnte nicht gelöscht werden",resetSuccess:"Farbkatalog auf Standardwerte zurückgesetzt",resetFailed:"Katalog konnte nicht zurückgesetzt werden",syncUpToDate:"Bereits aktuell ({{count}} Farben geprüft)",syncComplete:"{{added}} neue Farben hinzugefügt ({{skipped}} bereits vorhanden)",syncError:"Sync-Fehler",syncFailed:"Synchronisierung von FilamentColors.xyz fehlgeschlagen",exported:"{{count}} Farben exportiert",imported:"{{added}} Farben importiert ({{skipped}} übersprungen)",importFailed:"Import fehlgeschlagen: ungültiges JSON-Format",selectedCount:"{{count}} ausgewählt",deleteSelected:"Ausgewählte löschen",bulkDeleteConfirm:"Möchten Sie {{count}} Farben wirklich löschen?",bulkDeleted:"{{count}} Farben gelöscht",bulkDeleteFailed:"Fehler beim Löschen der Farben"},dateFormat:"Datumsformat",dateFormatUs:"US (MM/TT/JJJJ)",dateFormatEu:"EU (TT/MM/JJJJ)",dateFormatIso:"ISO (JJJJ-MM-TT)",timeFormat:"Zeitformat",timeFormat12:"12-Stunden (3:30 PM)",timeFormat24:"24-Stunden (15:30)",defaultPrinter:"Standarddrucker",defaultPrinterDescription:"Diesen Drucker für Uploads, Nachdrucke und andere Vorgänge vorauswählen.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Elemente in der Seitenleiste per Drag & Drop neu anordnen. Hier auf Standardreihenfolge zurücksetzen.",setDefault:"Standard setzen",sidebarOrderSetDefaultHint:"Standard setzen übernimmt die aktuelle Menüreihenfolge für Benutzer, die ihre noch nicht angepasst haben.",sidebarDefaultSet:"Standard-Menüreihenfolge wurde festgelegt.",sidebarDefaultCleared:"Standard-Menüreihenfolge gelöscht.",sidebarDefaultFailed:"Festlegen der Standard-Menüreihenfolge fehlgeschlagen.",reset:"Zurücksetzen",darkMode:"Dunkelmodus",lightMode:"Hellmodus",active:"(aktiv)",background:"Hintergrund",accent:"Akzent",style:"Stil",bgNeutral:"Neutral",bgWarm:"Warm",bgCool:"Kühl",bgOled:"OLED Schwarz",bgSlate:"Schieferblau",bgForest:"Waldgrün",accentGreen:"Grün",accentTeal:"Türkis",accentBlue:"Blau",accentOrange:"Orange",accentPurple:"Lila",accentRed:"Rot",styleClassic:"Klassisch",styleGlow:"Leuchtend",styleVibrant:"Lebendig",themeToggleHint:"Zwischen Hell- und Dunkelmodus mit dem Sonnen-/Mondsymbol in der Seitenleiste wechseln.",autoArchivePrints:"Drucke automatisch archivieren",autoArchiveDescription:"3MF-Dateien automatisch speichern, wenn Drucke abgeschlossen sind",saveThumbnailsDescription:"Vorschaubilder aus 3MF-Dateien extrahieren und speichern",captureFinishPhotoDescription:"Foto von der Druckerkamera aufnehmen, wenn der Druck abgeschlossen ist",ffmpegNotInstalled:"ffmpeg nicht installiert",ffmpegRequired:"Kameraaufnahme benötigt ffmpeg. Installieren über <brew>brew install ffmpeg</brew> (macOS) oder <apt>apt install ffmpeg</apt> (Linux).",camera:"Kamera",cameraViewMode:"Kamera-Ansichtsmodus",cameraOverlayDescription:"Kamera öffnet sich als größenveränderbares Overlay auf dem Hauptbildschirm",cameraWindowDescription:"Kamera öffnet sich in einem separaten Browserfenster",externalCamerasDescription:"Externe Kameras konfigurieren, um die eingebaute Druckerkamera zu ersetzen. Unterstützt MJPEG-Streams, RTSP, HTTP-Snapshots und USB-Kameras (V4L2). Wenn aktiviert, wird die externe Kamera für Live-Ansicht und Abschlussfotos verwendet.",cameraPlaceholderUsb:"Gerätepfad (/dev/video0)",cameraPlaceholderUrl:"Kamera-URL (rtsp://... oder http://...)",cameraTypeMjpeg:"MJPEG-Stream",cameraTypeRtsp:"RTSP-Stream",cameraTypeSnapshot:"HTTP-Snapshot",cameraTypeUsb:"USB-Kamera (V4L2)",cameraRotation:"Drehung",test:"Testen",connected:"Verbunden",disconnected:"Getrennt",currency:"Währung",defaultFilamentCost:"Standard-Filamentkosten (pro kg)",electricityCost:"Stromkosten pro kWh",energyDisplayMode:"Energieanzeige-Modus",energyModePrintDescription:"Dashboard zeigt Summe der während Drucken verbrauchten Energie",energyModeTotalDescription:"Dashboard zeigt Gesamtenergie der Smart Plugs",fileManager:"Dateimanager",createArchiveEntry:"Archiveintrag beim Drucken erstellen",createArchiveEntryDescription:"Beim Drucken aus dem Dateimanager optional einen Archiveintrag erstellen",lowDiskSpaceWarning:"Warnung bei wenig Speicherplatz",lowDiskSpaceDescription:"Warnung anzeigen, wenn freier Speicherplatz unter diesen Schwellenwert fällt",printerFirmware:"Drucker-Firmware",checkFirmwareDescription:"Nach Firmware-Updates von Bambu Lab suchen",bambuddySoftware:"Bambuddy Software",autoCheckDescription:"Automatisch beim Start nach neuen Versionen suchen",checkNow:"Jetzt prüfen",updateAvailableVersion:"Update verfügbar: v{{version}}",releaseNotes:"Versionshinweise",updateViaDocker:"Update über Docker Compose:",updateViaHomeAssistant:"Updates werden vom Home Assistant Supervisor verwaltet. Öffne Einstellungen → Add-ons → Bambuddy in Home Assistant, um die neue Version zu installieren.",installUpdate:"Update installieren",latestVersionRunning:"Sie verwenden die neueste Version",failedToCheckUpdates:"Update-Prüfung fehlgeschlagen: {{error}}",backupRestore:"Sicherung & Wiederherstellung",backupRestoreDescription:"Einstellungen exportieren/importieren und GitHub-Backup konfigurieren",goToBackup:"Zur Sicherung",externalUrl:"Externe URL",externalUrlDescription:"Die externe URL, unter der Bambuddy erreichbar ist. Wird für Benachrichtigungsbilder und externe Integrationen verwendet.",bambuddyUrl:"Bambuddy-URL",externalUrlHint:"Protokoll und Port angeben (z.B. http://192.168.1.100:8000)",ftpRetry:"FTP-Wiederholung",ftpRetryDescription:"FTP-Operationen bei unzuverlässigem Drucker-WLAN wiederholen. Gilt für 3MF-Downloads, Druck-Uploads, Zeitraffer-Downloads und Firmware-Updates.",autoRetryDescription:"Fehlgeschlagene FTP-Operationen automatisch wiederholen",retryAttempts:"Wiederholungsversuche",retryDelay:"Wiederholungsverzögerung",connectionTimeout:"Verbindungs-Timeout",time_one:"{{count}} Mal",time_other:"{{count}} Mal",second_one:"{{count}} Sekunde",second_other:"{{count}} Sekunden",nSeconds:"{{count}} Sekunden",increaseForWeakWifi:"Erhöhen für Drucker mit schwachem WLAN",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Mit Home Assistant verbinden, um Smart Plugs über die HA REST-API zu steuern. Unterstützt Switch-, Light-, Input_Boolean- und Script-Entitäten.",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"Langlebiges Zugriffstoken",haTokenHint:"Token in HA erstellen: Profil → Langlebige Zugriffstoken → Token erstellen",connectionSuccessful:"Verbindung erfolgreich",connectionFailed:"Verbindung fehlgeschlagen",haConnectionSuccess:"Erfolgreich mit Home Assistant verbunden.",haConnectionFailed:"Verbindung zu Home Assistant fehlgeschlagen.",mqttPublishing:"MQTT-Veröffentlichung",mqttDescription:"BamBuddy-Ereignisse an einen externen MQTT-Broker zur Integration mit Node-RED, Home Assistant und anderen Automatisierungssystemen veröffentlichen.",mqttEnableDescription:"Ereignisse an externen MQTT-Broker veröffentlichen",brokerHostname:"Broker-Hostname",port:"Port",usernameOptional:"Benutzername (optional)",passwordOptional:"Passwort (optional)",topicPrefix:"Topic-Präfix",topicPrefixHint:"Topics werden sein: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Prometheus-Metriken",prometheusEndpointDescription:"Druckermetriken unter <code>/api/v1/metrics</code> für Prometheus/Grafana-Überwachung bereitstellen.",bearerTokenOptional:"Bearer-Token (optional)",bearerTokenHint:"Wenn gesetzt, müssen Anfragen <code>Authorization: Bearer <token></code> enthalten",metricsConnectionStatus:"Verbindungsstatus",metricsPrinterState:"Druckerstatus (idle/printing/etc)",metricsPrintProgress:"Druckfortschritt 0-100%",metricsBedTemp:"Betttemperatur",metricsNozzleTemp:"Düsentemperatur",metricsPrintsTotal:"Gesamtdrucke nach Ergebnis",metricsMore:"...und mehr (Schichten, Lüfter, Warteschlange, Filamentverbrauch)",smartPlugsDescription:"Smart Plugs (Tasmota oder Home Assistant) verbinden, um Stromsteuerung zu automatisieren und Energieverbrauch für Ihre Drucker zu verfolgen.",allOn:"Alle Ein",allOff:"Alle Aus",addSmartPlug:"Smart Plug hinzufügen",energySummary:"Energieübersicht",currentPower:"Aktuelle Leistung",plugsOnline:"{{reachable}}/{{total}} Plugs online",today:"Heute",yesterday:"Gestern",total:"Gesamt",enablePlugsForSummary:"Plugs aktivieren, um Energieübersicht zu sehen",addNotificationProvider:"Hinzufügen",systemBadge:"(System)",creating:"Erstellen...",changing:"Ändern...",deleteUserAndItems:"Benutzer UND dessen Elemente löschen",deleteUserKeepItems:"Benutzer löschen, Elemente behalten (werden herrenlos)",ok:"OK",twoFa:{totpTitle:"Authenticator-App (TOTP)",totpDesc:"Verwende eine Authenticator-App wie Google Authenticator, Aegis oder Authy.",emailOtpTitle:"E-Mail OTP",emailOtpDesc:"Sende einen Einmalcode an {{email}} beim Einloggen.",emailOtpNoEmail:"Füge eine E-Mail-Adresse zu deinem Konto hinzu, um diese Methode zu aktivieren.",addEmailFirst:"Dein Konto hat keine E-Mail-Adresse. Bitte einen Administrator, eine hinzuzufügen.",setupTotp:"Authenticator-App einrichten",setupAuthApp:"Authenticator-App einrichten",setupInstructions:"Scanne den QR-Code mit deiner Authenticator-App und bestätige mit einem Code.",manualEntry:"Kein Scanner? Gib dieses Secret manuell ein:",scannedContinue:"Code gescannt — weiter",enterCodeToConfirm:"Gib den 6-stelligen Code aus deiner Authenticator-App ein, um die Einrichtung zu bestätigen.",activate:"Aktivieren",disableTotp:"Authenticator deaktivieren",disableConfirmHint:"Gib einen gültigen TOTP-Code oder einen Backup-Code ein, um den Authenticator zu deaktivieren.",totpDisabled:"Authenticator-App deaktiviert.",emailOtpEnabled:"E-Mail OTP aktiviert.",emailOtpDisabled:"E-Mail OTP deaktiviert.",smtpRequired:"Bitte konfigurieren und testen Sie zuerst die SMTP-Einstellungen.",invalidCode:"Ungültiger Code. Bitte erneut versuchen.",enableEmailOtp:"E-Mail OTP aktivieren",disableEmailOtp:"E-Mail OTP deaktivieren",emailSetupEnterCode:"Ein Bestätigungscode wurde an Ihre E-Mail-Adresse gesendet. Geben Sie ihn unten ein, um zu bestätigen, dass Ihnen dieses Postfach gehört.",verifyAndEnable:"Verifizieren & Aktivieren",emailDisablePasswordHint:"Geben Sie Ihr Kontopasswort ein, um die Deaktivierung des E-Mail OTP zu bestätigen.",passwordPlaceholder:"Passwort eingeben",backupCodesTitle:"Backup-Codes sichern",backupCodesWarning:"Speichere diese Codes sicher. Jeder Code kann nur einmal verwendet werden und wird nicht erneut angezeigt.",backupCodesRemaining:"{{count}} Backup-Codes verbleibend",savedCodes:"Codes gespeichert",regenBackup:"Backup-Codes neu generieren",regenBackupHint:"Gib deinen aktuellen TOTP-Code ein, um 10 neue Backup-Codes zu generieren. Alle bestehenden Codes werden ungültig.",newBackupCodes:"Neue Backup-Codes",linkedAccounts:"Verknüpfte SSO-Konten",linkedAccountsDesc:"Diese externen Identitätsanbieter sind mit deinem Konto verknüpft.",oidcUnlinked:"Konto getrennt."},oidc:{title:"SSO / OIDC-Anbieter",desc:"Konfiguriere OpenID Connect-Anbieter für Single Sign-On.",addProvider:"Anbieter hinzufügen",newProvider:"Neuer Anbieter",empty:"Noch keine OIDC-Anbieter konfiguriert.",created:"Anbieter erstellt.",updated:"Anbieter aktualisiert.",deleted:"Anbieter gelöscht.",deleteTitle:"Anbieter löschen",deleteMessage:'"{{name}}" löschen? Alle verknüpften Benutzerkonten werden getrennt.',form:{name:"Anzeigename",issuerUrl:"Aussteller-URL",clientId:"Client-ID",clientSecret:"Client-Secret",scopes:"Scopes",iconUrl:"Symbol-URL (optional)",enabled:"Aktiviert",autoCreate:"Benutzer automatisch anlegen",autoCreateDesc:"Erstellt beim ersten Login automatisch ein lokales Konto.",autoLink:"Bestehende Konten automatisch verknüpfen",autoLinkDesc:"Verknüpft beim ersten Login vorhandene lokale Konten anhand der E-Mail-Adresse.",secretHint:"leer lassen zum Beibehalten",secretPlaceholder:"neues Secret",emailClaim:"E-Mail-Claim",emailClaimDesc:"JWT-Claim für die E-Mail-Identität. Für Azure Entra ID 'preferred_username' oder 'upn' verwenden (sendet kein email_verified). Nur vertrauenswürdige Claim-Namen verwenden.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Benutzerdefinierte Claims sind für die Auto-Verknüpfung nur sicher, wenn der Wert vom Mandanten verwaltet wird (z. B. Azure Entra ID upn / preferred_username). Aktiviere Auto-Verknüpfung nicht, wenn dein IdP Benutzern erlaubt, diesen Claim selbst zu setzen.",requireEmailVerified:"E-Mail-Verifizierung erforderlich",requireEmailVerifiedDesc:"E-Mail-Claim nur akzeptieren, wenn der Provider ihn als verifiziert markiert.",requireEmailVerifiedWarning:"Warnung: E-Mail wird auch ohne Verifizierung akzeptiert. Nur bei vertrauenswürdigen Providern verwenden.",requireEmailVerifiedAutoLink:"Auto-Verknüpfung zuerst deaktivieren, um diese Einstellung zu ändern."}}},notification:{printStarted:{title:"Druck gestartet",body:"{{printer}}: {{filename}} wird gedruckt"},printCompleted:{title:"Druck abgeschlossen",body:"{{printer}}: {{filename}} erfolgreich abgeschlossen"},printFailed:{title:"Druck fehlgeschlagen",body:"{{printer}}: {{filename}} ist fehlgeschlagen"},printStopped:{title:"Druck gestoppt",body:"{{printer}}: {{filename}} wurde gestoppt"},printProgress:{title:"Druckfortschritt",body:"{{printer}}: {{filename}} ist zu {{percent}}% abgeschlossen"},printerOffline:{title:"Drucker offline",body:"{{printer}} ist offline"},printerError:{title:"Druckerfehler",body:"{{printer}}: {{error}}"},filamentLow:{title:"Filament niedrig",body:"{{printer}}: Filament geht zur Neige"},maintenanceDue:{title:"Wartung fällig",body:"{{printer}}: {{items}} benötigen Aufmerksamkeit"}},errors:{generic:"Etwas ist schiefgelaufen",networkError:"Netzwerkfehler. Bitte überprüfen Sie Ihre Verbindung.",notFound:"Nicht gefunden",unauthorized:"Nicht autorisiert",serverError:"Serverfehler",validationError:"Bitte überprüfen Sie Ihre Eingabe",printerConnectionFailed:"Verbindung zum Drucker fehlgeschlagen",saveFailed:"Speichern fehlgeschlagen",deleteFailed:"Löschen fehlgeschlagen",loadFailed:"Laden der Daten fehlgeschlagen"},hmsErrors:{title:"Fehler - {{name}}",noErrors:"Keine Fehler",viewOnWiki:"Im Bambu Lab Wiki ansehen",clearInstructions:"Löschen Sie die Fehler am Drucker, um sie hier zu entfernen.",clearErrors:"Fehler löschen",clearSuccess:"HMS-Fehler gelöscht",clearFailed:"HMS-Fehler konnten nicht gelöscht werden"},mqttDebug:{title:"MQTT-Debug-Protokoll",searchPlaceholder:"Topic oder Payload suchen...",noMessages:"Noch keine Nachrichten protokolliert",startLoggingHint:'Klicken Sie auf "Protokollierung starten", um MQTT-Nachrichten aufzuzeichnen',noMessagesMatch:"Keine Nachrichten entsprechen Ihrem Filter",adjustFilterHint:"Versuchen Sie, Ihre Such- oder Filterkriterien anzupassen",incoming:"Eingehend",outgoing:"Ausgehend",loggingStopped:"Protokollierung gestoppt",loggingActive:"Protokollierung aktiv - Nachrichten werden automatisch aktualisiert",startLogging:"Protokollierung starten",stopLogging:"Protokollierung stoppen",clearLog:"Protokoll löschen",topic:"Topic",timestamp:"Zeitstempel",direction:"Richtung",all:"Alle"},printerFiles:{title:"Dateimanager",storageUsed:"Belegt:",storageFree:"Frei:",filterPlaceholder:"Dateien filtern...",deleteButton:"Löschen",deleteFiles:"{{count}} Dateien löschen",deleteFileConfirm:'"{{name}}" löschen? Dies kann nicht rückgängig gemacht werden.',deleteFilesConfirm:"{{count}} ausgewählte Dateien löschen? Dies kann nicht rückgängig gemacht werden.",noFiles:"Keine Dateien auf dem Drucker",loadingFiles:"Dateien werden geladen...",failedToLoad:"Dateien konnten nicht geladen werden",toast:{filesDeleted:"{{count}} Datei(en) gelöscht",deleteFailed:"Löschen fehlgeschlagen: {{error}}"}},confirm:{delete:"Möchten Sie dies wirklich löschen?",unsavedChanges:"Sie haben ungespeicherte Änderungen. Möchten Sie wirklich verlassen?",clearQueue:"Möchten Sie die Warteschlange wirklich leeren?"},login:{title:"Bambuddy Anmeldung",subtitle:"Melden Sie sich bei Ihrem Konto an",username:"Benutzername",usernamePlaceholder:"Benutzername eingeben",usernameOrEmail:"Benutzername oder E-Mail",usernameOrEmailPlaceholder:"Benutzername oder @ E-Mail",password:"Passwort",passwordPlaceholder:"Passwort eingeben",signIn:"Anmelden",signingIn:"Anmeldung läuft...",rememberMe:"Angemeldet bleiben",forgotPassword:"Passwort vergessen?",loginSuccess:"Erfolgreich angemeldet",loginFailed:"Anmeldung fehlgeschlagen",enterCredentials:"Bitte Benutzername und Passwort eingeben",enterEmail:"Bitte geben Sie Ihre E-Mail-Adresse ein",oidcLoginFailed:"OIDC-Anmeldung fehlgeschlagen",oidcErrors:{providerError:"Der Identity-Provider hat einen Fehler zurückgegeben",missingParameters:"Dem OIDC-Callback fehlen erforderliche Parameter",invalidState:"OIDC-State ist ungültig oder wurde bereits verwendet",stateExpired:"OIDC-Sitzung abgelaufen — bitte erneut versuchen",providerNotFound:"OIDC-Provider nicht gefunden",discoveryFailed:"OIDC-Discovery-Dokument konnte nicht abgerufen werden",invalidDiscovery:"OIDC-Discovery-Dokument ist ungültig",networkError:"Netzwerkfehler beim OIDC-Token-Austausch",badResponse:"Unerwartete Antwort beim OIDC-Token-Austausch",noIdToken:"OIDC-Provider hat kein ID-Token zurückgegeben",validationFailed:"OIDC-Token-Validierung fehlgeschlagen",nonceMismatch:"OIDC-Nonce stimmt nicht überein — möglicher Replay-Angriff",missingSubClaim:"OIDC-Token enthält keinen Sub-Claim",noLinkedAccount:"Kein lokales Konto mit dieser OIDC-Identität verknüpft",accountInactive:"Ihr Konto ist inaktiv",userResolutionFailed:"Ihr Konto konnte nicht aufgelöst werden",internalError:"Interner Fehler beim OIDC-Login",tokenExchangeFailed:"OIDC-Token-Austausch fehlgeschlagen"},forgotPasswordTitle:"Passwort vergessen",forgotPasswordMessage:"Wenn Sie Ihr Passwort vergessen haben, wenden Sie sich bitte an Ihren Systemadministrator.",forgotPasswordEmailMessage:"Geben Sie Ihre E-Mail-Adresse ein und wir senden Ihnen ein neues Passwort.",emailAddress:"E-Mail-Adresse",emailPlaceholder:"ihre.email@beispiel.de",cancel:"Abbrechen",sending:"Wird gesendet...",sendResetEmail:"Zurücksetzungs-E-Mail senden",howToReset:"So setzen Sie Ihr Passwort zurück:",resetStep1:"Kontaktieren Sie Ihren Bambuddy-Administrator",resetStep2:"Bitten Sie ihn, Ihr Passwort in der Benutzerverwaltung zurückzusetzen",resetStep3:"Er kann ein neues temporäres Passwort für Sie festlegen",resetStep4:"Melden Sie sich mit dem neuen Passwort an und ändern Sie es in den Einstellungen",gotIt:"Verstanden",resetPassword:{title:"Neues Passwort festlegen",subtitle:"Geben Sie unten Ihr neues Passwort ein und bestätigen Sie es.",newPassword:"Neues Passwort",newPasswordPlaceholder:"Mindestens 8 Zeichen",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Neues Passwort wiederholen",saving:"Wird gespeichert…",submit:"Neues Passwort festlegen",backToLogin:"Zurück zur Anmeldung",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 8 Zeichen lang sein",resetFailed:"Passwort zurücksetzen fehlgeschlagen. Der Link ist möglicherweise abgelaufen."},twoFA:{title:"Zwei-Faktor-Authentifizierung",subtitle:"Ihr Konto ist mit 2FA geschützt. Geben Sie unten den Bestätigungscode ein.",methodAuthenticator:"Authenticator-App",methodEmail:"E-Mail-Code",methodBackup:"Wiederherstellungscode",instructionsTotp:"Öffnen Sie Ihre Authenticator-App und geben Sie den 6-stelligen Code für Bambuddy ein.",instructionsEmail:"Ein 6-stelliger Code wurde an Ihre E-Mail-Adresse gesendet. Er ist 10 Minuten gültig.",instructionsEmailNotSent:"Klicken Sie unten, um einen Bestätigungscode per E-Mail zu erhalten.",instructionsBackup:"Geben Sie einen Ihrer 8-stelligen Wiederherstellungscodes ein. Jeder Code kann nur einmal verwendet werden.",sendCodeButton:"Code per E-Mail senden",sendingCode:"Wird gesendet...",resendCode:"Code erneut senden",codeLabel:"Bestätigungscode",backupCodeLabel:"Wiederherstellungscode",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Bestätigen",verifyingButton:"Wird überprüft...",backToLogin:"← Zurück zur Anmeldung",orContinueWith:"oder anmelden mit",signInWith:"Anmelden mit {{provider}}",enterCode:"Bitte geben Sie den Bestätigungscode ein",sendCodeFailed:"Bestätigungscode konnte nicht gesendet werden",invalidCode:"Ungültiger Code. Bitte erneut versuchen."}},setup:{title:"Bambuddy Einrichtung",subtitle:"Konfigurieren Sie die Authentifizierung für Ihre Bambuddy-Instanz",enableAuth:"Authentifizierung aktivieren",adminAccount:"Admin-Konto",adminAccountDesc:"Wenn bereits Admin-Benutzer existieren, wird die Authentifizierung mit den vorhandenen Admin-Konten aktiviert. Lassen Sie die Felder unten leer, um vorhandene Admins zu verwenden, oder geben Sie neue Anmeldedaten ein, um einen neuen Admin-Benutzer zu erstellen.",adminUsername:"Admin-Benutzername",adminPassword:"Admin-Passwort",optionalIfAdminExists:"(optional, wenn Admin-Benutzer existieren)",adminUsernamePlaceholder:"Admin-Benutzernamen eingeben (optional)",adminPasswordPlaceholder:"Admin-Passwort eingeben (optional)",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Admin-Passwort bestätigen",settingUp:"Einrichtung läuft...",completeSetup:"Einrichtung abschließen",toast:{authEnabledAdminCreated:"Authentifizierung aktiviert und Admin-Benutzer erstellt",authEnabledExistingAdmins:"Authentifizierung mit vorhandenen Admin-Benutzern aktiviert",setupCompleted:"Einrichtung abgeschlossen",enterBothCredentials:"Bitte geben Sie sowohl Admin-Benutzernamen als auch Passwort ein, oder lassen Sie beide leer, um vorhandene Admin-Benutzer zu verwenden",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein"}},changePassword:{title:"Passwort ändern",currentPassword:"Aktuelles Passwort",currentPasswordPlaceholder:"Aktuelles Passwort eingeben",newPassword:"Neues Passwort",newPasswordPlaceholder:"Neues Passwort eingeben (min. 6 Zeichen)",confirmPassword:"Neues Passwort bestätigen",confirmPasswordPlaceholder:"Neues Passwort bestätigen",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein",changing:"Wird geändert...",success:"Passwort erfolgreich geändert",failed:"Passwortänderung fehlgeschlagen"},plateAlert:{title:"Druck pausiert!",message:"Objekte auf dem Druckbett erkannt. Der Druck wurde automatisch pausiert. Bitte räumen Sie das Druckbett und setzen Sie den Druck fort.",understand:"Verstanden"},camera:{title:"Kameraansicht",invalidPrinterId:"Ungültige Drucker-ID",live:"Live",snapshot:"Schnappschuss",restartStream:"Stream neu starten",refreshSnapshot:"Schnappschuss aktualisieren",fullscreen:"Vollbild",exitFullscreen:"Vollbild beenden",connectingToCamera:"Verbinde mit Kamera...",capturingSnapshot:"Schnappschuss wird aufgenommen...",connectionLost:"Verbindung verloren",connectionFailed:"Kameraverbindung fehlgeschlagen",reconnecting:"Neuverbindung in {{countdown}}s... (Versuch {{attempt}}/{{max}})",reconnectNow:"Jetzt verbinden",cameraUnavailable:"Kamera nicht verfügbar",cameraUnavailableDesc:"Stellen Sie sicher, dass der Drucker eingeschaltet und verbunden ist.",noCamera:"Keine Kamera verfügbar",retry:"Erneut versuchen",cameraStream:"Kamera-Stream",zoomOut:"Verkleinern",zoomIn:"Vergrößern",resetZoom:"Zoom zurücksetzen",recording:"Aufnahme",startRecording:"Aufnahme starten",stopRecording:"Aufnahme stoppen",chamberLight:"Kammerbeleuchtung umschalten"},groups:{title:"Gruppenverwaltung",subtitle:"Berechtigungsgruppen für Zugriffskontrolle verwalten",backToSettings:"Zurück zu Einstellungen",createGroup:"Gruppe erstellen",noPermission:"Sie haben keine Berechtigung, auf diese Seite zuzugreifen.",system:"System",noDescription:"Keine Beschreibung",usersCount:"{{count}} Benutzer",permissionsCount:"{{count}} Berechtigungen",edit:"Bearbeiten",delete:"Löschen",toast:{created:"Gruppe erfolgreich erstellt",updated:"Gruppe erfolgreich aktualisiert",deleted:"Gruppe erfolgreich gelöscht",enterGroupName:"Bitte geben Sie einen Gruppennamen ein"},modal:{editGroup:"Gruppe bearbeiten",createGroup:"Gruppe erstellen",cancel:"Abbrechen",saving:"Speichern...",creating:"Erstellen...",saveChanges:"Änderungen speichern"},form:{groupName:"Gruppenname",groupNamePlaceholder:"Gruppennamen eingeben",systemGroupWarning:"Systemgruppennamen können nicht geändert werden",description:"Beschreibung",descriptionPlaceholder:"Beschreibung eingeben (optional)",permissions:"Berechtigungen ({{count}} ausgewählt)"},deleteModal:{title:"Gruppe löschen",message:"Sind Sie sicher, dass Sie diese Gruppe löschen möchten? Benutzer in dieser Gruppe verlieren diese Berechtigungen.",confirm:"Gruppe löschen"},editor:{title:"Gruppe bearbeiten",createTitle:"Gruppe erstellen",search:"Berechtigungen suchen...",selectAll:"Alle auswählen",clearAll:"Alle abwählen",permissionsSelected:"{{count}} ausgewählt",noResults:"Keine Berechtigungen entsprechen Ihrer Suche"}},users:{title:"Benutzerverwaltung",subtitle:"Benutzer und deren Zugriff auf Ihre Bambuddy-Instanz verwalten",backToSettings:"Zurück zu Einstellungen",createUser:"Benutzer erstellen",noPermission:"Sie haben keine Berechtigung, auf diese Seite zuzugreifen.",admin:"Admin",noGroups:"Keine Gruppen",active:"Aktiv",inactive:"Inaktiv",edit:"Bearbeiten",delete:"Löschen",system:"System",noGroupsAvailable:"Keine Gruppen verfügbar",table:{username:"Benutzername",groups:"Gruppen",status:"Status",actions:"Aktionen"},toast:{created:"Benutzer erfolgreich erstellt",updated:"Benutzer erfolgreich aktualisiert",deleted:"Benutzer erfolgreich gelöscht",fillRequired:"Bitte füllen Sie alle Pflichtfelder aus",passwordsDoNotMatch:"Passwörter stimmen nicht überein",passwordTooShort:"Passwort muss mindestens 6 Zeichen lang sein"},modal:{createUser:"Benutzer erstellen",editUser:"Benutzer bearbeiten",cancel:"Abbrechen",creating:"Erstellen...",saving:"Speichern...",saveChanges:"Änderungen speichern",advancedAuthSubtitle:"mit erweiterter Authentifizierung"},form:{username:"Benutzername",usernamePlaceholder:"Benutzernamen eingeben",email:"E-Mail",emailPlaceholder:"benutzer@beispiel.de",password:"Passwort",passwordPlaceholder:"Passwort eingeben",confirmPassword:"Passwort bestätigen",confirmPasswordPlaceholder:"Passwort bestätigen",newPasswordPlaceholder:"Neues Passwort eingeben",confirmNewPasswordPlaceholder:"Neues Passwort bestätigen",leaveBlankToKeep:"leer lassen, um das aktuelle zu behalten",groups:"Gruppen",optional:"optional",autoGeneratedPassword:"Ein sicheres Passwort wird automatisch generiert und per E-Mail an den Benutzer gesendet.",passwordManagedByAdvancedAuth:'Das Passwort wird durch erweiterte Authentifizierung verwaltet. Verwenden Sie "Passwort zurücksetzen", um ein neues Passwort per E-Mail an den Benutzer zu senden.',resetPassword:"Passwort zurücksetzen",resettingPassword:"Passwort wird zurückgesetzt..."},deleteModal:{title:"Benutzer löschen",message:"Sind Sie sicher, dass Sie diesen Benutzer löschen möchten? Diese Aktion kann nicht rückgängig gemacht werden.",confirm:"Benutzer löschen"}},streamOverlay:{title:"Stream-Overlay",invalidPrinterId:"Ungültige Drucker-ID",cameraStream:"Kamera-Stream",progress:"Fortschritt",eta:"ETA",printerIdle:"Drucker ist inaktiv",printerOffline:"Drucker offline",status:{printing:"Druckt",paused:"Pausiert",finished:"Fertig",failed:"Fehlgeschlagen",idle:"Inaktiv",unknown:"Unbekannt"}},profiles:{title:"Profile",subtitle:"Verwalten Sie Ihre Slicer-Voreinstellungen und Druckvorschub-Kalibrierungen",tabs:{cloud:"Cloud-Profile",local:"Lokale Profile",kprofiles:"K-Profile"},localProfiles:{title:"Lokale Profile",subtitle:"Slicer-Voreinstellungen aus OrcaSlicer importieren und verwalten",import:"Profile importieren",importDesc:".bbscfg-, .bbsflmt-, .orca_filament-, .zip- oder .json-Dateien hier ablegen",importing:"Importiere...",search:"Lokale Voreinstellungen durchsuchen...",noPresets:"Noch keine lokalen Voreinstellungen",badge:"Lokal",edit:"Bearbeiten",delete:"Löschen",cancel:"Abbrechen",deleteConfirmTitle:"Voreinstellung löschen",deleteConfirm:"Möchten Sie diese Voreinstellung wirklich löschen? Dies kann nicht rückgängig gemacht werden.",source:"Quelle",inheritsFrom:"Erbt von",filamentType:"Typ",vendor:"Hersteller",compatiblePrinters:"Drucker",nozzleTemp:"Düsentemperatur",cost:"Kosten",density:"Dichte",pressureAdvance:"Druckvorschub",filament:"Filament",process:"Prozess",printer:"Drucker",toast:{importSuccess:"{{count}} Voreinstellung(en) importiert",importSkipped:"{{count}} Voreinstellung(en) übersprungen (Duplikate)",importError:"{{count}} Fehler beim Import",deleted:"Voreinstellung gelöscht",updated:"Voreinstellung aktualisiert"}},connectedAs:"Verbunden als",logout:"Abmelden",noLogoutPermission:"Sie haben keine Berechtigung zum Abmelden",failedToLoad:"Profile konnten nicht geladen werden",retry:"Erneut versuchen",time:{justNow:"Gerade eben",minsAgo:"vor {{count}}m",hoursAgo:"vor {{count}}h",daysAgo:"vor {{count}}d"},toast:{loggedOut:"Abgemeldet"},login:{title:"Mit Bambu Cloud verbinden",subtitle:"Synchronisieren Sie Ihre Slicer-Voreinstellungen geräteübergreifend",email:"E-Mail",password:"Passwort",region:"Region",regionGlobal:"Global",regionChina:"China",verificationCode:"Bestätigungscode",totpCode:"Authenticator-Code",checkEmail:"Prüfen Sie Ihre E-Mail ({{email}}) für einen 6-stelligen Code",enterTotpHint:"Geben Sie den 6-stelligen Code aus Ihrer Authenticator-App ein",accessToken:"Zugriffstoken",accessTokenHint:"Fügen Sie Ihr Bambu Lab Zugriffstoken ein (aus Bambu Studio)",back:"Zurück",loginButton:"Anmelden",verifyButton:"Bestätigen",setTokenButton:"Token setzen",useToken:"Stattdessen Zugriffstoken verwenden",useEmail:"Stattdessen mit E-Mail anmelden",toast:{loggedIn:"Erfolgreich angemeldet",codeSent:"Bestätigungscode an Ihre E-Mail gesendet",enterTotp:"Geben Sie den Code aus Ihrer Authenticator-App ein",tokenSet:"Token erfolgreich gesetzt"}},presets:{myPreset:"Mein Profil (bearbeitbar)",duplicate:"Duplizieren",editable:"Bearbeitbar",failedToLoadDetails:"Profil-Details konnten nicht geladen werden",deleteConfirm:"Dieses Profil löschen?",deleteWarning:'"{{name}}" wird dauerhaft aus Bambu Cloud gelöscht. Dies kann nicht rückgängig gemacht werden.',noDuplicatePermission:"Sie haben keine Berechtigung zum Duplizieren von Profilen",noEditPermission:"Sie haben keine Berechtigung zum Bearbeiten von Profilen",noDeletePermission:"Sie haben keine Berechtigung zum Löschen von Profilen",types:{filament:"Filament-Profil",printer:"Drucker-Profil",process:"Prozess-Profil"},toast:{deleted:"Profil gelöscht",created:"Profil erstellt",updated:"Profil aktualisiert",duplicated:"Profil dupliziert",fieldAdded:'Feld "{{key}}" hinzugefügt',exported:"Profil exportiert"},baseLabel:"Basis: {{name}}",currentLabel:"Aktuell: {{name}}",newPreset:"Neues Profil",editPreset:"Profil bearbeiten",duplicatePreset:"Profil duplizieren",createNewPreset:"Neues Profil erstellen",customizeSettings:"Passen Sie die Einstellungen für Ihr neues Profil an",compareWithBase:"Mit Basis-Profil vergleichen",compare:"Vergleichen",basePreset:"Basis-Profil",selectBasePreset:"Basis-Profil auswählen...",presetName:"Profilname",myCustomPreset:"Mein eigenes Profil",inheritsFrom:"Erbt von",dropJsonToImport:"JSON zum Importieren ablegen",tabs:{common:"Allgemein",allFields:"Alle Felder"},availableFields:"Verfügbare Felder",searchFieldsPlaceholder:"Felder suchen...",noMatchingFields:"Keine passenden Felder",allFieldsAdded:"Alle Felder hinzugefügt",addCustomField:"Eigenes Feld hinzufügen",yourOverrides:"Ihre Überschreibungen",noOverridesYet:"Noch keine Überschreibungen",clickFieldsToAdd:"Klicken Sie links auf Felder, um sie hinzuzufügen",saveAsTemplate:"Als Vorlage speichern",jsonTip:"Tipp: Ziehen Sie eine .json-Datei auf dieses Fenster, um Einstellungen zu importieren"},cloudView:{searchPlaceholder:"Profile suchen...",templates:"Vorlagen",refresh:"Aktualisieren",newPreset:"Neues Profil",clearFilters:"Filter zurücksetzen",compareMode:"Vergleichsmodus",selectAnotherPreset:"Wählen Sie ein weiteres {{type}}-Profil",clickTwoPresets:"Klicken Sie auf zwei Profile des gleichen Typs zum Vergleichen",selectFirst:"1. Erstes auswählen",selectSecond:"2. Zweites auswählen",compareNow:"Jetzt vergleichen",lastSynced:"Zuletzt synchronisiert:",showingCount:"{{showing}} von {{total}} Profilen",noPresetsFound:"Keine Profile gefunden",columns:{filament:"Filament",process:"Prozess",printer:"Drucker"},noFilamentPresets:"Keine Filament-Profile",noProcessPresets:"Keine Prozess-Profile",noPrinterPresets:"Keine Drucker-Profile",filters:{type:"Typ",owner:"Besitzer",printer:"Drucker",nozzle:"Düse",filament:"Filament",layer:"Schicht",all:"Alle",myPresets:"Meine Profile",builtIn:"Voreingestellt",process:"Prozess"},noTemplatesPermission:"Sie haben keine Berechtigung, Vorlagen zu verwalten",noRefreshPermission:"Sie haben keine Berechtigung, Profile zu aktualisieren",noCreatePermission:"Sie haben keine Berechtigung, Profile zu erstellen"},templates:{title:"Schnellvorlagen",noTemplates:"Noch keine Vorlagen",createFirst:"Erstellen Sie Vorlagen aus dem Preset-Editor",typeFilter:"Typ:",deleteTitle:"Vorlage löschen",deleteWarning:"Diese Aktion kann nicht rückgängig gemacht werden",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',namePlaceholder:"Vorlagenname",descriptionPlaceholder:"Beschreibung",settingsJson:"Einstellungen (JSON)",fieldsCount:"{{count}} Felder",shownInModals:"In Dialogen angezeigt",hiddenInModals:"In Dialogen ausgeblendet",apply:"Anwenden",toast:{deleted:"Vorlage gelöscht",updated:"Vorlage aktualisiert",created:"Vorlage erstellt",applied:"Vorlage angewendet"}}},support:{debugLoggingActive:"Debug-Protokollierung ist aktiv",manageLogs:"Verwalten",collectItem7:"Drucker-Verbindungsstatus und Firmware-Versionen",collectItem8:"Integrationsstatus (Spoolman, MQTT, HA)",collectItem9:"Netzwerkschnittstellen (nur Subnetze)",collectItem10:"Python-Paketversionen",collectItem11:"Datenbankzustandsprüfungen",collectItem12:"Docker-Umgebungsdetails"},fileManager:{title:"Dateimanager",subtitle:"Organisieren und verwalten Sie Ihre Druckdateien",uploadFiles:"Dateien hochladen",newFolder:"Neuer Ordner",folderName:"Ordnername",folderNamePlaceholder:"z.B. Funktionsteile",renameFile:"Datei umbenennen",renameFolder:"Ordner umbenennen",moveFiles:"{{count}} Datei(en) verschieben",rootNoFolder:"Stammverzeichnis (Kein Ordner)",current:"aktuell",linkFolder:"Ordner verknüpfen",linkFolderDescription:'"{{name}}" mit einem Projekt oder Archiv verknüpfen für schnellen Zugriff.',project:"Projekt",archive:"Archiv",noProjectsFound:"Keine Projekte gefunden",noArchivesFound:"Keine Archive gefunden",unlink:"Verknüpfung aufheben",link:"Verknüpfen",dragDropFiles:"Dateien hierher ziehen",dropFilesHere:"Dateien hier ablegen",orClickToBrowse:"oder klicken zum Durchsuchen",allFileTypesSupported:"Alle Dateitypen werden unterstützt. ZIP-Dateien werden extrahiert.",zipFilesDetected:"ZIP-Dateien erkannt",zipExtractOptions:"ZIP-Dateien werden extrahiert. Wählen Sie, wie die Ordnerstruktur behandelt werden soll:",preserveZipStructure:"Ordnerstruktur aus ZIP beibehalten",createFolderFromZip:"Ordner aus ZIP-Dateiname erstellen",stlThumbnailGeneration:"STL-Vorschaubildgenerierung",zipMayContainStl:"ZIP-Dateien können STL-Dateien enthalten. Vorschaubilder können während der Extraktion generiert werden.",thumbnailsCanBeGenerated:"Vorschaubilder können für STL-Dateien generiert werden. Große Modelle benötigen möglicherweise mehr Zeit.",generateThumbnailsForStl:"Vorschaubilder für STL-Dateien generieren",threemfDetected:"3MF-Dateien erkannt",threemfExtractionInfo:"Druckermodell, Material, Farbe und Druckeinstellungen werden automatisch aus 3MF-Dateien extrahiert.",willBeExtracted:"Wird extrahiert",filesExtracted:"{{count}} Dateien extrahiert",uploadComplete:"Upload abgeschlossen: {{succeeded}} erfolgreich",uploadFailed:"Hochladen fehlgeschlagen",zipFilesFailed:"{{count}} Dateien fehlgeschlagen",uploading:"Hochladen...",changeLink:"Verknüpfung ändern...",linkTo:"Verknüpfen mit...",linkToProjectOrArchive:"Mit Projekt oder Archiv verknüpfen",addToQueue:"Zur Warteschlange",schedulePrint:"Planen",generateThumbnail:"Vorschaubild generieren",generateThumbnails:"Vorschaubilder generieren",generateThumbnailsForMissing:"Vorschaubilder für STL-Dateien ohne Vorschau generieren",gridView:"Rasteransicht",listView:"Listenansicht",lowDiskSpaceWarning:"Warnung: Wenig Speicherplatz",lowDiskSpaceDetails:"Nur {{free}} frei von {{total}} gesamt. Schwellenwert ist auf {{threshold}} GB eingestellt.",files:"Dateien",folders:"Ordner",size:"Größe",free:"Frei",allFiles:"Alle Dateien",wrap:"Umbrechen",enableTextWrapping:"Textumbruch aktivieren",disableTextWrapping:"Textumbruch deaktivieren",collapse:"Einklappen",collapseFoldersByDefault:"Ordner standardmäßig einklappen",expandFoldersByDefault:"Ordner standardmäßig ausklappen",dragToResizeTooltip:"Ziehen zum Ändern der Größe, Doppelklick zum Zurücksetzen",searchFiles:"Dateien suchen...",allTypes:"Alle Typen",prints:"Drucke",ascending:"Aufsteigend",descending:"Absteigend",resultsCount:"{{showing}} von {{total}} Dateien",selectAll:"Alle auswählen",deselectAll:"Auswahl aufheben",selected:"{{count}} ausgewählt",adding:"Hinzufügen...",loadingFiles:"Dateien werden geladen...",folderIsEmpty:"Ordner ist leer",noFilesYet:"Noch keine Dateien",folderEmptyDescription:"Laden Sie Dateien hoch oder verschieben Sie Dateien in diesen Ordner.",noFilesDescription:"Laden Sie Dateien hoch, um Ihre Druckdateien zu organisieren.",noMatchingFiles:"Keine passenden Dateien",noMatchingFilesDescription:"Keine Dateien entsprechen Ihren aktuellen Such- oder Filterkriterien.",clearFilters:"Filter zurücksetzen",printedCount:"{{count}}x gedruckt",uploadedBy:"Hochgeladen von",deleteFolder:"Ordner löschen",deleteFile:"Datei löschen",deleteFilesCount:"{{count}} Dateien löschen",deleteFolderConfirm:"Möchten Sie diesen Ordner wirklich löschen? Alle Dateien darin werden ebenfalls gelöscht.",deleteFileConfirm:"Möchten Sie diese Datei wirklich löschen?",deleteFilesConfirm:"Möchten Sie {{count}} ausgewählte Dateien wirklich löschen? Diese Aktion kann nicht rückgängig gemacht werden.",deleting:"Wird gelöscht...",noPermissionRenameFolder:"Sie haben keine Berechtigung, Ordner umzubenennen",noPermissionLinkFolder:"Sie haben keine Berechtigung, Ordner zu verknüpfen",noPermissionDeleteFolder:"Sie haben keine Berechtigung, Ordner zu löschen",noPermissionPrint:"Sie haben keine Berechtigung zum Drucken",noPermissionSlice:"Sie haben keine Berechtigung, Dateien zu slicen",noPermissionAddToQueue:"Sie haben keine Berechtigung, zur Warteschlange hinzuzufügen",noPermissionDownload:"Sie haben keine Berechtigung, Dateien herunterzuladen",noPermissionRenameFile:"Sie haben keine Berechtigung, diese Datei umzubenennen",noPermissionGenerateThumbnail:"Sie haben keine Berechtigung, Vorschaubilder zu generieren",noPermissionDeleteFile:"Sie haben keine Berechtigung, diese Datei zu löschen",noPermissionCreateFolder:"Sie haben keine Berechtigung, Ordner zu erstellen",noPermissionUpload:"Sie haben keine Berechtigung, Dateien hochzuladen",noPermissionMoveFiles:"Sie haben keine Berechtigung, Dateien zu verschieben",noPermissionDeleteFiles:"Sie haben keine Berechtigung, Dateien zu löschen",linkExternal:"Extern verknüpfen",linkExternalFolder:"Externen Ordner verknüpfen",linkExternalFolderDescription:"Ein Host-Verzeichnis (NAS, USB, Netzlaufwerk) in den Dateimanager einbinden. Dateien werden nicht kopiert — sie werden direkt vom Originalpfad gelesen.",externalFolderNamePlaceholder:"z.B. NAS-Drucke",externalPath:"Host-Pfad",externalPathHelp:"Absoluter Pfad zum Verzeichnis auf dem Docker-Host. Muss als Bind-Mount in den Container eingebunden sein.",readOnly:"Nur Lesen",readOnlyHelp:"verhindert Uploads und Löschungen",showHiddenFiles:"Versteckte Dateien anzeigen (Punkt-Dateien)",externalFolder:"Externer Ordner",scanFolder:"Scannen",toast:{folderCreated:"Ordner erstellt",folderDeleted:"Ordner gelöscht",fileDeleted:"Datei gelöscht",filesDeleted:"{{count}} Dateien gelöscht",filesMoved:"Dateien verschoben",folderLinked:"Ordner verknüpft",folderUnlinked:"Ordnerverknüpfung aufgehoben",externalFolderLinked:"Externer Ordner verknüpft und gescannt",folderScanned:"Scan abgeschlossen: {{added}} hinzugefügt, {{removed}} entfernt",addedToQueue:"{{count}} Datei(en) zur Warteschlange hinzugefügt",addedToQueuePartial:"{{added}} Datei(en) hinzugefügt, {{failed}} fehlgeschlagen",failedToAddToQueue:"Fehler beim Hinzufügen: {{error}}",fileRenamed:"Datei umbenannt",folderRenamed:"Ordner umbenannt",thumbnailsGenerated:"{{count}} Vorschaubild(er) generiert",thumbnailsGeneratedPartial:"{{succeeded}} Vorschaubild(er) generiert, {{failed}} fehlgeschlagen",noStlMissingThumbnails:"Keine STL-Dateien ohne Vorschaubild",failedToGenerateThumbnails:"Fehler beim Generieren der Vorschaubilder: {{error}}",thumbnailGenerated:"Vorschaubild generiert",failedToGenerateThumbnail:"Fehler beim Generieren des Vorschaubildes: {{error}}"}},projects:{title:"Projekte",subtitle:"Organisieren und verfolgen Sie Ihre 3D-Druckprojekte",newProject:"Neues Projekt",editProject:"Projekt bearbeiten",deleteProject:"Projekt löschen",projectName:"Projektname",description:"Beschreibung",noProjects:"Noch keine Projekte",noProjectsFiltered:"Keine {{status}} Projekte",noProjectsFilteredHelp:"Sie haben keine {{status}} Projekte. Projekte werden hier angezeigt, wenn sich ihr Status ändert.",createFirst:"Erstellen Sie Ihr erstes Projekt, um verwandte Drucke zu organisieren, den Fortschritt zu verfolgen und Ihre Builds zu verwalten.",createFirstButton:"Erstes Projekt erstellen",create:"Erstellen",files:"Dateien",prints:"Drucke",plates:"Platten",parts:"Teile",lastModified:"Zuletzt geändert",deleteConfirm:"Möchten Sie dieses Projekt wirklich löschen? Archive und Warteschlangenelemente werden getrennt, aber nicht gelöscht.",addFiles:"Dateien hinzufügen",removeFile:"Datei entfernen",viewDetails:"Details anzeigen",namePlaceholder:"z.B. Voron 2.4 Build",descriptionPlaceholder:"Optionale Beschreibung...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URL muss mit http:// oder https:// beginnen",openExternalUrl:"Projekt-URL öffnen",coverImageLabel:"Titelbild",coverImageAlt:"Projekt-Titelbild",coverImageUpload:"Hochladen",coverImageReplace:"Ersetzen",coverImageRemove:"Entfernen",color:"Farbe",targetPlates:"Ziel-Platten",targetPlatesPlaceholder:"z.B. 25",targetPlatesHelp:"Anzahl der Druckaufträge",targetParts:"Ziel-Teile",targetPartsPlaceholder:"z.B. 150",targetPartsHelp:"Benötigte Objekte insgesamt",tagsLabel:"Tags (kommagetrennt)",tagsPlaceholder:"z.B. voron, funktional, geschenk",dueDate:"Fälligkeitsdatum",priority:"Priorität",priorityLow:"Niedrig",priorityNormal:"Normal",priorityHigh:"Hoch",priorityUrgent:"Dringend",statusActive:"Aktiv",statusCompleted:"Abgeschlossen",statusArchived:"Archiviert",done:"Fertig",completed:"abgeschlossen",failed:"fehlgeschlagen",inQueue:"in Warteschlange",noPrintsYet:"Noch keine Drucke",printJobs:"Druckaufträge (Platten)",partsPrinted:"Gedruckte Teile",failedParts:"Fehlgeschlagene Teile",import:"Importieren",export:"Exportieren",importProject:"Projekt importieren",exportAll:"Alle Projekte exportieren",loading:"Projekte werden geladen...",noEditPermission:"Sie haben keine Berechtigung, Projekte zu bearbeiten",noDeletePermission:"Sie haben keine Berechtigung, Projekte zu löschen",noCreatePermission:"Sie haben keine Berechtigung, Projekte zu erstellen",noImportPermission:"Sie haben keine Berechtigung, Projekte zu importieren",noExportPermission:"Sie haben keine Berechtigung, Projekte zu exportieren",toast:{created:"Projekt erstellt",updated:"Projekt aktualisiert",deleted:"Projekt gelöscht",imported:"Projekt importiert",multipleImported:"{{count}} Projekte importiert",importFailed:"Import fehlgeschlagen",exported:"Projekte exportiert (nur Metadaten)"}},projectDetail:{notFound:"Projekt nicht gefunden",backToProjects:"Zurück zu Projekten",export:"Exportieren",exportProject:"Projekt exportieren",noExportPermission:"Sie haben keine Berechtigung, Projekte zu exportieren",noEditPermission:"Sie haben keine Berechtigung, Projekte zu bearbeiten",partOf:"Teil von:",priorityLabel:"Priorität:",noPrints:"Noch keine Drucke in diesem Projekt",status:{active:"Aktiv",completed:"Abgeschlossen",archived:"Archiviert"},priority:{low:"Niedrig",normal:"Normal",high:"Hoch",urgent:"Dringend"},dueDate:{overdue:"Überfällig",today:"Heute fällig",daysLeft:"{{count}} Tage übrig"},progress:{platesProgress:"Platten-Fortschritt",partsProgress:"Teile-Fortschritt",printJobs:"Druckaufträge",parts:"Teile",percentComplete:"{{percent}}% abgeschlossen",remaining:"{{count}} verbleibend"},stats:{printJobs:"Druckaufträge",total:"gesamt",failed:"{{count}} fehlgeschlagen",partsPrinted:"{{count}} Teile gedruckt",printTime:"Druckzeit",filamentUsed:"Filament verbraucht"},cost:{title:"Kostenverfolgung",filamentCost:"Filamentkosten",energy:"Energie",totalCost:"Gesamtkosten",total:"Gesamt",includesBom:"inkl. Stückliste",budget:"Budget",remaining:"Verbleibend"},subProjects:{title:"Unterprojekte ({{count}})"},notes:{title:"Notizen",noEditPermission:"Sie haben keine Berechtigung, Notizen zu bearbeiten",placeholder:"Notizen zu diesem Projekt hinzufügen...",empty:"Noch keine Notizen. Klicken Sie auf Bearbeiten, um Notizen hinzuzufügen."},files:{title:"Dateien",linkFolders:"Ordner aus dem Dateimanager verknüpfen",forQuickAccess:"für schnellen Zugriff auf dieses Projekt.",fileCount:"{{count}} Datei(en)",empty:"Keine Ordner verknüpft. Gehen Sie zum Dateimanager und verknüpfen Sie einen Ordner mit diesem Projekt.",noFiles:"Keine Dateien in diesem Ordner.",print:"Jetzt drucken",addToQueue:"Zur Warteschlange"},bom:{title:"Stückliste",acquired:"{{completed}}/{{total}} beschafft",showAll:"Alle anzeigen",hideDone:"Erledigte ausblenden",addPart:"Teil hinzufügen",noAddPermission:"Sie haben keine Berechtigung, Teile hinzuzufügen",partNamePlaceholder:"Teilename (z.B. M3x8 Schrauben)",partName:"Teilename",qty:"Menge",price:"Preis ({{currency}})",sourcingUrlPlaceholder:"Bezugsquelle-URL (optional)",remarksPlaceholder:"Bemerkungen (optional)",deletePart:"Teil löschen",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen?',noUpdatePermission:"Sie haben keine Berechtigung, Teile zu aktualisieren",noEditPermission:"Sie haben keine Berechtigung, Teile zu bearbeiten",noDeletePermission:"Sie haben keine Berechtigung, Teile zu löschen",totalCost:"Gesamtkosten:",empty:"Keine Teile in der Stückliste. Fügen Sie Hardware, Elektronik oder andere Komponenten hinzu, um zu verfolgen, was beschafft werden muss."},timeline:{title:"Aktivitätsverlauf",empty:"Noch keine Aktivität."},template:{saveAsTemplate:"Als Vorlage speichern",noCreatePermission:"Sie haben keine Berechtigung, Vorlagen zu erstellen"},queue:{title:"Warteschlange",viewAll:"Alle anzeigen",printing:"{{count}} druckend",queued:"{{count}} in Warteschlange"},prints:{title:"Drucke ({{count}})"},toast:{projectUpdated:"Projekt aktualisiert",partAdded:"Teil hinzugefügt",partRemoved:"Teil entfernt",exportFailed:"Export fehlgeschlagen",projectExported:"Projekt exportiert",templateCreated:"Vorlage erstellt"}},system:{title:"Systeminformationen",version:"Version",uptime:"Laufzeit",cpuUsage:"CPU-Auslastung",memoryUsage:"Speicherauslastung",diskUsage:"Festplattenauslastung",networkInfo:"Netzwerkinformationen",logs:"Protokolle",debugMode:"Debug-Modus",enableDebug:"Debug-Protokollierung aktivieren",disableDebug:"Debug-Protokollierung deaktivieren",downloadLogs:"Protokolle herunterladen",clearLogs:"Protokolle löschen",dockerInfo:"Docker-Info",containerName:"Container-Name",imageName:"Image-Name",platform:"Plattform",architecture:"Architektur"},library:{title:"Filament-Bibliothek",addFilament:"Filament hinzufügen",editFilament:"Filament bearbeiten",deleteFilament:"Filament löschen",vendor:"Hersteller",material:"Material",color:"Farbe",kFactor:"K-Faktor",temperature:"Temperatur",noFilaments:"Keine Filamente in der Bibliothek",deleteConfirm:"Möchten Sie dieses Filament wirklich löschen?",importFromPrinter:"Vom Drucker importieren",exportToFile:"In Datei exportieren"},slice:{title:"Modell slicen",action:"Slice",slicing:"Slicen…",printer:"Drucker-Profil",process:"Prozess-Profil",filament:"Filament-Profil",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Profil auswählen —",loadingPresets:"Profile werden geladen…",analyzingPlateFilaments:"Plattenfilamente werden analysiert…",analyzingPlateFilamentsHint:"Es wird ein Probeschnitt ausgeführt, um die belegten AMS-Slots dieser Platte zu ermitteln. Wird zwischengespeichert — erneutes Öffnen ist sofort.",previewToast:"{{name}} wird analysiert — {{elapsed}}",previewWithProgress:"{{name}} wird analysiert — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— wird von dieser Platte nicht verwendet",printerMismatch:"Dieses 3MF wurde für {{source}} gesliced, du hast aber {{target}} ausgewählt. Der Slicer-CLI kann ein 3MF nicht für einen anderen Drucker neu slicen — öffne die Quelle in Bambu Studio, ändere den Drucker und exportiere neu.",noPresetsForSlot:"Keine Profile verfügbar",presetsLoadFailed:"Profile konnten nicht geladen werden. Importiere sie zuerst unter Einstellungen → Profile.",allPresetsRequired:"Alle Profile müssen ausgewählt sein",enqueuing:"Slice-Auftrag wird übermittelt…",queued:"In Warteschlange…",failed:"Slicen fehlgeschlagen. Logs des Slicer-Sidecars prüfen.",startedToast:"{{name}} wird im Hintergrund gesliced…",queuedToast:"Warteschlange: {{name}} — {{elapsed}}",runningToast:"{{name}} wird gesliced — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"{{name}} wurde gesliced",failedToast:"Slicen von {{name}} fehlgeschlagen: {{detail}}",tier:{local:"Importiert",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"In Bambu Cloud anmelden (Einstellungen → Profile → Cloud), um deine Cloud-Profile zu sehen.",expired:"Bambu-Cloud-Sitzung abgelaufen — erneut anmelden, um die Cloud-Profile zu aktualisieren.",unreachable:"Bambu Cloud ist gerade nicht erreichbar. Lokale und Standard-Profile funktionieren weiterhin."}},spoolman:{title:"Spoolman-Integration",enabled:"Spoolman aktiviert",url:"Spoolman URL",connected:"Verbunden",disconnected:"Nicht verbunden",testConnection:"Verbindung testen",sync:"Synchronisieren",syncing:"Synchronisiert...",lastSync:"Letzte Synchronisierung",linkToSpoolman:"Mit Spoolman verknüpfen",openInSpoolman:"In Spoolman öffnen",unlinkSpool:"Spule trennen",unlinkConfirmTitle:"Spule entkoppeln?",unlinkConfirmMessage:"Dadurch wird die Spule von Spoolman getrennt. Die Spulendaten in Spoolman bleiben unverändert.",selectSpool:"Spule auswählen",noUnlinkedSpools:"Keine nicht verknüpften Spulen verfügbar",linkSuccess:"Spule erfolgreich mit Spoolman verknüpft",linkFailed:"Verknüpfung mit Spoolman fehlgeschlagen",unlinkSuccess:"Spule erfolgreich von Spoolman getrennt",unlinkFailed:"Trennen der Spule von Spoolman fehlgeschlagen",spoolId:"Spulen-ID",fillSourceLabel:"(Spoolman)",weight:"Gewicht",remaining:"Verbleibend",disableWeightSync:"AMS-Gewichtsschätzung deaktivieren",disableWeightSyncDesc:"Verbleibende Kapazität nicht aus AMS-Schätzungen aktualisieren. Verwenden Sie dies, wenn Sie die Verbrauchserfassung von Spoolman gegenüber den prozentualen AMS-Schätzungen bevorzugen. Neue Spulen verwenden weiterhin die AMS-Schätzung als Anfangsgewicht.",reportPartialUsage:"Teilverbrauch bei fehlgeschlagenen Drucken melden",reportPartialUsageDesc:"Wenn ein Druck fehlschlägt oder abgebrochen wird, den geschätzten Filamentverbrauch bis zu diesem Zeitpunkt basierend auf dem Schichtfortschritt melden."},inventory:{title:"Spulen-Inventar",spoolmanMixedContentTitle:"Spoolman lässt sich nicht über HTTPS laden — Browser blockiert gemischte Inhalte",spoolmanMixedContentBody:"Bambuddy wird über HTTPS ausgeliefert (über deinen Reverse-Proxy), aber deine Spoolman-URL ist nach wie vor HTTP. Browser blockieren gemischte Inhalte aus Sicherheitsgründen, daher kann die eingebettete Spoolman-Oberfläche nicht geladen werden. Spoolman muss ebenfalls über HTTPS erreichbar sein.",spoolmanMixedContentFixReverseProxy:"Stelle Spoolman hinter denselben Reverse-Proxy wie Bambuddy (Traefik / Nginx / Caddy) mit HTTPS und aktualisiere die Spoolman-URL in den Einstellungen auf die neue HTTPS-Adresse.",spoolmanMixedContentFixOpenNewTab:"Als Workaround kannst du Spoolman in einem neuen Tab über HTTP öffnen — gemischte Inhalte werden nur innerhalb eingebetteter Frames blockiert, ein eigener Tab funktioniert weiterhin.",spoolmanOpenInNewTab:"Spoolman in neuem Tab öffnen",addSpool:"Spule hinzufügen",editSpool:"Spule bearbeiten",material:"Material",selectMaterial:"Material auswählen...",subtype:"Untertyp",brand:"Marke",searchBrand:"Marke suchen...",useCustomBrand:'"{{brand}}" verwenden',useCustomMaterial:"Benutzerdefiniertes Material verwenden: {{material}}",colorName:"Farbname",colorNamePlaceholder:"Jade White, Fire Red...",color:"Farbe",hexColor:"Hex-Farbe",pickColor:"Benutzerdefinierte Farbe wählen",labelWeight:"Nenngewicht",coreWeight:"Leergewicht der Spule",searchSpoolWeight:"Spulengewicht suchen...",weightUsed:"Verbraucht",currentWeight:"Restgewicht",measuredWeight:"Gemessenes Gewicht",spoolName:"Spule",costPerKg:"Kosten pro kg",measuredWeightError:"Das gemessene Gewicht muss zwischen {{min}}g und {{max}}g liegen.",slicerFilament:"Slicer-Filament",slicerFilamentName:"Slicer-Preset-Name",slicerPreset:"Slicer-Preset",searchPresets:"Filament-Presets suchen...",selectedPreset:"Ausgewählt",noPresetsFound:"Keine Presets gefunden",tempOverrides:"Temperatur-Überschreibungen",note:"Notiz",notePlaceholder:"Zusätzliche Notizen zu dieser Spule...",category:"Kategorie",categoryPlaceholder:"z. B. Produktion, Prototyp, Kunde A",categoryNone:"Ohne Kategorie",lowStockThresholdOverride:"Niedrigbestandsschwelle (diese Spule)",lowStockThresholdOverrideHelp:"Leer lassen, um den globalen Schwellenwert ({{global}}%) zu verwenden.",clearRfid:"RFID-Tag löschen",rfidCleared:"RFID-Tag gelöscht",archive:"Archivieren",restore:"Wiederherstellen",noSpools:"Noch keine Spulen. Fügen Sie Ihre erste Spule hinzu.",noAvailableSpools:"Keine Spulen verfügbar. Fügen Sie eine Spule zum Inventar hinzu oder lösen Sie eine aus einem anderen Slot.",kProfiles:"K-Profile",addKProfile:"K-Profil hinzufügen",assignSpool:"Spule zuweisen",unassignSpool:"Zuweisung aufheben",assignSuccess:"Spule zugewiesen und AMS-Slot konfiguriert",assignFailed:"Spulenzuweisung fehlgeschlagen",selectSpool:"Wählen Sie eine Spule für diesen Slot",assigned:"Zugewiesen",assigning:"Wird zugewiesen...",searchSpools:"Spulen suchen...",showAllSpools:"Alle Spulen anzeigen",allMaterials:"Alle Materialien",filterByBrand:"Nach Marke filtern...",showArchived:"Archivierte anzeigen",quickAdd:"Schnellerfassung (Lager)",quantity:"Menge",stock:"Lager",configured:"Konfiguriert",spoolsCreated:"{{count}} Spulen erstellt",spoolCreated:"Spule erstellt",spoolUpdated:"Spule aktualisiert",spoolDeleted:"Spule gelöscht",spoolArchived:"Spule archiviert",spoolRestored:"Spule wiederhergestellt",deleteConfirm:"Möchten Sie diese Spule wirklich löschen? Dies kann nicht rückgängig gemacht werden.",archiveConfirm:"Möchten Sie diese Spule wirklich archivieren?",advancedSettings:"Erweiterte Einstellungen",filamentInfoTab:"Filament-Info",paProfileTab:"PA-Profil",filamentInfo:"Filament",additional:"Zusätzlich",loadingPresets:"Cloud-Presets werden geladen...",cloudConnected:"Cloud verbunden",cloudNotConnected:"Cloud nicht verbunden (Standardwerte)",recentColors:"Zuletzt",searchColors:"Farben suchen...",searchResults:"Suchergebnisse",allColors:"Alle Farben",commonColors:"Häufige Farben",showLess:"Weniger",showAll:"Alle",noColorsFound:"Keine Farben gefunden",noResults:"Keine Ergebnisse",extraColorsLabel:"Zusätzliche Farben",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"2 bis 8 Hex-Stops, durch Kommas getrennt. Wird als Verlauf dargestellt.",extraColorsInvalid:"Ungültige Hex-Werte ignoriert: {{tokens}}",colorEffectLabel:"Effekt",colorEffect:{none:"Keiner",sparkle:"Glitzer",wood:"Holz",marble:"Marmor",glow:"Leuchtend",matte:"Matt",silk:"Seide",galaxy:"Galaxy",rainbow:"Regenbogen",metal:"Metallic",translucent:"Lichtdurchlässig",gradient:"Verlauf",dualColor:"Zweifarbig",triColor:"Dreifarbig",multicolor:"Mehrfarbig"},selectMaterialFirst:"Bitte zuerst ein Material im Filament-Info Tab auswählen.",noPrintersConfigured:"Keine Drucker konfiguriert. Fügen Sie Drucker hinzu.",matchingFilter:"Filter",anyBrand:"Jede Marke",anyVariant:"Jede Variante",autoSelect:"Auto-Auswahl",matches:"Treffer",match:"Treffer",noMatches:"Keine Treffer",connected:"Verbunden",offline:"Offline",printerOffline:"Drucker ist offline. Verbinden Sie ihn, um Kalibrierungsprofile anzuzeigen.",noKProfilesMatch:"Keine K-Profile stimmen mit dem gewählten Filament überein.",leftNozzle:"Linke Düse",rightNozzle:"Rechte Düse",profilesSelected:"Kalibrierungsprofil(e) ausgewählt",totalInventory:"Gesamtbestand",totalConsumed:"Gesamtverbrauch",byMaterial:"Nach Material",inPrinter:"Im Drucker",lowStock:"Niedriger Bestand",sinceTracking:"Seit Beginn der Erfassung",loadedInAms:"Im AMS/Ext geladen",remaining:"Verbleibend",weightCheck:"Gewichtskontrolle",lastWeighed:"Zuletzt gewogen",neverWeighed:"Nie gewogen",search:"Spulen suchen...",showing:"Zeige",to:"bis",of:"von",show:"Zeige",spools:"Spulen",spool:"Spule",page:"Seite",noSpoolsMatch:"Keine Ergebnisse",noSpoolsMatchDesc:"Versuchen Sie, Ihre Suche oder Filter anzupassen.",active:"Aktiv",archived:"Archiviert",all:"Alle",used:"Verwendet",new:"Neu",clearFilters:"Filter löschen",table:"Tabelle",cards:"Karten",net:"Netto",groupSimilar:"Gruppieren",groupedSpools:"{{count}} identische Spulen",groupedRows:"Zeilen",columns:"Spalten",configureColumns:"Spalten konfigurieren",configureColumnsDesc:"Ziehen zum Neuordnen oder Pfeile verwenden. Sichtbarkeit mit dem Augensymbol umschalten.",visible:"sichtbar",reset:"Zurücksetzen",cancel:"Abbrechen",applyChanges:"Änderungen anwenden",moveUp:"Nach oben",moveDown:"Nach unten",hideColumn:"Spalte ausblenden",showColumn:"Spalte einblenden",linkToSpool:"Mit Spule verknüpfen",tagLinked:"Tag mit Spule verknüpft",tagLinkFailed:"Tag-Verknüpfung fehlgeschlagen",tagAlreadyLinked:"Tag bereits mit anderer Spule verknüpft",unknownTag:"Unbekannter RFID-Tag erkannt",usageHistory:"Verbrauchshistorie",noUsageHistory:"Noch kein Verbrauch erfasst",printName:"Druckname",weightConsumed:"Verbrauchtes Gewicht",clearHistory:"Löschen",historyCleared:"Verbrauchshistorie gelöscht",fillSourceLabel:"(Inv)",lowStockThresholdError:"Der Schwellenwert muss zwischen 0.1 und 99.9 liegen",assignMismatchTitle:"Material stimmt nicht überein",assignMismatchMessage:'Das ausgewählte Spulenmaterial "{{spoolMaterial}}" stimmt nicht mit dem Tray-Material "{{trayMaterial}}" für {{location}} überein. Trotzdem zuweisen?',assignMismatchConfirm:"Trotzdem zuweisen",assignPartialMismatchMessage:'Das Spulenmaterial "{{spoolMaterial}}" ist ähnlich, stimmt aber nicht genau mit "{{trayMaterial}}" in {{location}} überein. Möchten Sie fortfahren?',assignProfileMismatchMessage:'Das Spulenprofil "{{spoolProfile}}" stimmt nicht mit dem Fachprofil "{{trayProfile}}" in {{location}} überein. Möchten Sie fortfahren?'},timelapse:{title:"Zeitraffer",create:"Zeitraffer erstellen",download:"Herunterladen",delete:"Löschen",preview:"Vorschau",frameRate:"Bildrate",quality:"Qualität",processing:"Wird verarbeitet...",noTimelapses:"Keine Zeitraffer verfügbar"},ams:{title:"AMS",slot:"Slot",empty:"Leer",emptySlot:"Leerer Slot",unknown:"Unbekannt",humidity:"Luftfeuchtigkeit",temperature:"Temperatur",filamentType:"Filamenttyp",filamentColor:"Farbe",remaining:"Verbleibend",history:"AMS-Verlauf",noHistory:"Kein Verlauf verfügbar",configureSlot:"Slot konfigurieren",externalSpool:"Externe Spule",profile:"Profil",kFactor:"K-Faktor",fill:"Füllstand",configure:"Konfigurieren",used:"verwendet",remainingUnit:"verbleibend"},printModal:{title:"Druck starten",selectPrinter:"Drucker auswählen",selectPlate:"Platte auswählen",filamentMapping:"Filamentzuordnung",totalCost:"Gesamtkosten:",slotRemainingShort:" - {{grams}}g übrig",printSettings:"Druckeinstellungen",bedLeveling:"Bett-Nivellierung",flowCalibration:"Fluss-Kalibrierung",vibrationCalibration:"Vibrations-Kalibrierung",layerInspection:"Erste-Schicht-Prüfung",timelapse:"Zeitraffer",startPrint:"Druck starten",addToQueue:"Zur Warteschlange hinzufügen",cancel:"Abbrechen",noPrintersAvailable:"Keine Drucker verfügbar",printerBusy:"Drucker ist beschäftigt",printerOffline:"Drucker ist offline",sameTypeDifferentColor:"Gleicher Typ, andere Farbe",filamentTypeNotLoaded:"Filamenttyp nicht geladen",openCalendar:"Kalender öffnen",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Linke Düse",rightNozzleTooltip:"Rechte Düse",filamentOverride:"Filament-Überschreibung",filamentOverrideHint:"Filamente für modellbasierte Zuweisung optional überschreiben. Der Planer wird gegen die ausgewählten Filamente statt der ursprünglichen 3MF-Werte abgleichen.",originalFilament:"Original",overrideWith:"Ersetzen mit",resetToOriginal:"Auf Original zurücksetzen",insufficientFilamentTitle:"Nicht genug Filament",insufficientFilamentMessage:"Einige zugewiesene Spulen haben weniger Filament als dieser Druck benötigt:",insufficientFilamentLine:"{{printer}} - {{slot}}: benötigt {{required}}g, verbleibend {{remaining}}g",printAnyway:"Trotzdem drucken",forceColorMatch:"Farbe erzwingen",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Gestaffelt an {{count}} Drucker senden",gcodeInjection:"Auto-Print G-code einfügen"},backup:{title:"Sichern & Wiederherstellen",createBackup:"Sicherung erstellen",restoreBackup:"Sicherung wiederherstellen",restoreDescription:"Alle Daten aus einer Sicherungsdatei ersetzen",downloadBackup:"Sicherung herunterladen",uploadBackup:"Sicherung hochladen",lastBackup:"Letzte Sicherung",autoBackup:"Automatische Sicherung",backupNow:"Jetzt sichern",restoreWarning:"Warnung: Das Wiederherstellen einer Sicherung überschreibt alle aktuellen Daten.",includeArchives:"Archive einschließen",includeSettings:"Einstellungen einschließen",includeProfiles:"Profile einschließen",backupSuccess:"Sicherung erfolgreich erstellt",restoreSuccess:"Sicherung erfolgreich wiederhergestellt",backupFailed:"Sicherung fehlgeschlagen",restoreFailed:"Wiederherstellung fehlgeschlagen",restoreNote:"Virtueller Drucker wird während der Wiederherstellung gestoppt",githubBackup:"GitHub Backup",enabled:"Aktiviert",cloudLoginRequired:"Bambu Cloud Login erforderlich. Melden Sie sich unter Profile → Cloud-Profile an, um GitHub-Backup zu aktivieren.",cloudLoginRequiredShort:"Cloud-Login erforderlich",githubDescription:"Synchronisieren Sie Ihre Profile automatisch mit einem privaten GitHub-Repository für Backup und Versionsverlauf.",repositoryUrl:"Repository-URL",personalAccessToken:"Persönlicher Zugriffstoken",tokenSaved:"(gespeichert)",enterNewToken:"Neuen Token eingeben zum Aktualisieren",tokenHint:"Feingranularer Token mit Lese-/Schreibberechtigung für Inhalte",branch:"Branch",manualOnly:"Nur manuell",hourly:"Stündlich",daily:"Täglich",weekly:"Wöchentlich",includeInBackup:"In Sicherung einschließen",kProfiles:"K-Profile",kProfilesDescription:"Druckvorschub-Kalibrierung von verbundenen Druckern",noPrintersConnected:"Keine Drucker verbunden",printersConnected:"{{connected}}/{{total}} verbunden",cloudProfiles:"Cloud-Profile",cloudProfilesDescription:"Filament-, Drucker- und Prozessprofile aus der Bambu Cloud",appSettings:"App-Einstellungen",appSettingsDescription:"Bambuddy-Konfiguration (komplette Datenbank)",spoolInventory:"Spulenbestand",spoolInventoryDescription:"Filamentspulen, Nutzungsverlauf und Kostenverfolgung",printArchives:"Druckarchive",printArchivesDescription:"Druckverlauf-Metadaten (keine GCode/3MF-Dateien)",lastBackupAt:"Letzte Sicherung:",noBackupsYet:"Noch keine Sicherungen",next:"Nächste:",startingBackup:"Sicherung wird gestartet...",test:"Test",enableBackup:"Sicherung aktivieren",testConnection:"Verbindung testen",enterRepoUrl:"Repository-URL eingeben",enterRepoAndToken:"Repository-URL und Zugriffstoken eingeben",repoRequired:"Repository-URL ist erforderlich",tokenRequired:"Zugriffstoken ist erforderlich",githubBackupEnabled:"GitHub-Backup aktiviert",tokenUpdated:"Token aktualisiert",settingsSaved:"Einstellungen gespeichert",failedToSave:"Speichern fehlgeschlagen: {{message}}",backupCompleteFiles:"Sicherung abgeschlossen - {{count}} Dateien aktualisiert",backupSkippedNoChanges:"Sicherung übersprungen - keine Änderungen",backupFailed2:"Sicherung fehlgeschlagen: {{message}}",clearedLogs:"{{count}} Protokolle gelöscht",failedToClearLogs:"Protokolle löschen fehlgeschlagen: {{message}}",history:"Verlauf",clear:"Löschen",date:"Datum",status:"Status",commit:"Commit",localBackup:"Lokale Sicherung",localBackupDescription:"Erstellen Sie eine vollständige Sicherung Ihrer Bambuddy-Daten einschließlich Datenbank, Archive, Uploads und aller Dateien.",downloadBackupLabel:"Sicherung herunterladen",completeBackupZip:"Vollständige Sicherung: Datenbank + alle Dateien (ZIP)",download:"Herunterladen",preparingBackup:"Sicherung wird vorbereitet...",creatingArchive:"Sicherungsarchiv wird erstellt... Dies kann bei großen Archiven eine Weile dauern.",downloadingFile:"Sicherungsdatei wird heruntergeladen...",backupDownloaded:"Sicherung erfolgreich heruntergeladen",failedToCreateBackup:"Sicherung erstellen fehlgeschlagen: {{message}}",restore:"Wiederherstellen",restoreReplacesAll:"Wiederherstellung ersetzt alle Daten.",restoreReplacesAllDetail:"Ihre aktuelle Datenbank und Dateien werden vollständig ersetzt. Nach der Wiederherstellung ist ein Neustart erforderlich.",restoreConfirmTitle:"Sicherung wiederherstellen",restoreConfirmMessage:'Sind Sie sicher, dass Sie von "{{filename}}" wiederherstellen möchten? Dies ersetzt Ihre aktuelle Datenbank und alle Dateien vollständig. Die Anwendung muss nach der Wiederherstellung neu gestartet werden.',restoreConfirmButton:"Sicherung wiederherstellen",uploadingFile:"Sicherungsdatei wird hochgeladen...",backupRestoredRestart:"Sicherung wiederhergestellt. Bitte starten Sie Bambuddy neu.",failedToRestore:"Sicherung wiederherstellen fehlgeschlagen. Bitte überprüfen Sie das Dateiformat.",reloadNow:"Jetzt neu laden",creatingBackup:"Sicherung erstellen",restoringBackup:"Sicherung wiederherstellen",preparing:"Vorbereiten...",processing:"Verarbeiten...",doNotClosePage:"Bitte schließen Sie diese Seite nicht und navigieren Sie nicht weg. Dieser Vorgang kann bei großen Sicherungen mehrere Minuten dauern.",restoring:"Wiederherstellen...",restoreComplete:"Wiederherstellung abgeschlossen",restoreFailed2:"Wiederherstellung fehlgeschlagen",importSettings:"Einstellungen aus einer Sicherungsdatei importieren",pleaseWaitRestoring:"Bitte warten Sie, während Ihre Daten wiederhergestellt werden",selectBackupFile:"Klicken Sie, um eine Sicherungsdatei auszuwählen (.json oder .zip)",duplicateHandling:"So funktioniert die Duplikatbehandlung:",matchPrinters:"Drucker",matchPrintersBy:"abgeglichen nach Seriennummer",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"abgeglichen nach IP-Adresse",matchNotificationProviders:"Benachrichtigungsanbieter",matchNotificationProvidersBy:"abgeglichen nach Name",matchFilaments:"Filamente",matchFilamentsBy:"abgeglichen nach Name + Typ + Marke",matchArchives:"Archive",matchArchivesBy:"abgeglichen nach Inhaltshash (immer übersprungen)",matchPendingUploads:"Ausstehende Uploads",matchPendingUploadsBy:"abgeglichen nach Dateiname",matchSettingsTemplates:"Einstellungen & Vorlagen",matchSettingsTemplatesBy:"immer überschrieben",replaceExisting:"Vorhandene Daten ersetzen",keepExisting:"Vorhandene Daten behalten",overwriteDescription:"Bereits vorhandene Elemente mit Sicherungsdaten überschreiben",keepDescription:"Nur Elemente wiederherstellen, die noch nicht vorhanden sind",overwriteCaution:"Achtung:",overwriteWarning:"Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Daten aus der Sicherung. Drucker-Zugangscodes werden aus Sicherheitsgründen nie überschrieben.",cancel:"Abbrechen",processingBackup:"Sicherungsdatei wird verarbeitet...",itemsRestored:"Wiederhergestellt",itemsSkipped:"Übersprungen",restored:"Wiederhergestellt",skippedAlreadyExist:"Übersprungen (bereits vorhanden)",filesCategory:"Dateien (3MF, Thumbnails, etc.)",andMore:"...und {{count}} weitere",newApiKeysGenerated:"Neue API-Schlüssel generiert",keysShownOnce:"Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!",copy:"Kopieren",noDataFound:"In der Sicherungsdatei wurden keine Daten zur Wiederherstellung gefunden.",close:"Schließen",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Einstellungen",notification_providers:"Benachrichtigungsanbieter",notification_templates:"Benachrichtigungsvorlagen",smart_plugs:"Smart Plugs",printers:"Drucker",filaments:"Filamente",maintenance_types:"Wartungstypen",archives:"Archive",projects:"Projekte",pending_uploads:"Ausstehende Uploads",external_links:"Externe Links",api_keys:"API-Schlüssel"}},tags:{title:"Tags",addTag:"Tag hinzufügen",editTag:"Tag bearbeiten",deleteTag:"Tag löschen",tagName:"Tag-Name",tagColor:"Tag-Farbe",noTags:"Keine Tags",deleteConfirm:"Möchten Sie diesen Tag wirklich löschen?",manageTags:"Tags verwalten"},uploadModal:{title:"3MF-Dateien hochladen",dragDrop:"3MF-Dateien hierher ziehen",or:"oder",browseFiles:"Dateien durchsuchen",extractionInfo:"Das Druckermodell wird automatisch aus den 3MF-Datei-Metadaten extrahiert.",uploaded:"hochgeladen",failed:"fehlgeschlagen",uploading:"Wird hochgeladen...",upload:"Hochladen",uploadFailed:"Hochladen fehlgeschlagen"},editArchive:{title:"Archiv bearbeiten",name:"Name",namePlaceholder:"Druckname",printer:"Drucker",noPrinter:"Kein Drucker",project:"Projekt",noProject:"Kein Projekt",itemsPrinted:"Gedruckte Teile",itemsPrintedHelp:"Anzahl der in diesem Druckauftrag produzierten Teile",notes:"Notizen",notesPlaceholder:"Notizen zu diesem Druck hinzufügen...",externalLink:"Externer Link",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link zu Printables, Thingiverse oder anderer Quelle",tags:"Tags",tagsPlaceholder:"Tags hinzufügen...",addMoreTags:"Weitere Tags hinzufügen...",matchingTags:'Übereinstimmend mit "{{query}}"',existingTags:"Vorhandene Tags",clickToAdd:"(zum Hinzufügen klicken)",status:"Status",failureReason:"Fehlergrund",selectReason:"Grund auswählen...",photos:"Fotos des Druckergebnisses",photosHelp:"Klicken Sie auf + um Fotos Ihres Druckergebnisses hinzuzufügen",printResult:"Druckergebnis",saving:"Wird gespeichert...",failureReasons:{adhesionFailure:"Haftungsfehler",spaghettiDetached:"Spaghetti / Abgelöst",layerShift:"Schichtversatz",cloggedNozzle:"Verstopfte Düse",filamentRunout:"Filament aufgebraucht",warping:"Verformung",stringing:"Fadenziehen",underExtrusion:"Unterextrusion",powerFailure:"Stromausfall",userCancelled:"Vom Benutzer abgebrochen",other:"Sonstiges"},statuses:{completed:"Abgeschlossen",failed:"Fehlgeschlagen",aborted:"Abgebrochen",printing:"Druckt"}},kProfiles:{title:"K-Profile",noPrintersConfigured:"Keine Drucker konfiguriert",addPrinterInSettings:"Fügen Sie einen Drucker in den Einstellungen hinzu, um K-Profile zu verwalten",noActivePrinters:"Keine aktiven Drucker",enablePrinterConnection:"Aktivieren Sie eine Druckerverbindung, um K-Profile anzuzeigen",loadingProfiles:"Lade K-Profile...",printerOffline:"Drucker offline",printerOfflineDesc:"Der ausgewählte Drucker ist nicht verbunden. Schalten Sie ihn ein, um K-Profile anzuzeigen.",noMatchingProfiles:"Keine passenden Profile",noMatchingProfilesDesc:"Keine Profile entsprechen Ihren Suchkriterien",noKProfiles:"Keine K-Profile",noKProfilesDesc:"Keine Druckvorschub-Profile für {{diameter}}mm Düse gefunden",createFirstProfile:"Erstes Profil erstellen",printer:"Drucker",nozzle:"Düse",refresh:"Aktualisieren",addProfile:"Profil hinzufügen",export:"Exportieren",import:"Importieren",select:"Auswählen",selectAll:"Alle auswählen",delete:"Löschen",searchPlaceholder:"Nach Name oder Filament suchen...",allExtruders:"Alle Extruder",leftOnly:"Nur links",rightOnly:"Nur rechts",allFlow:"Alle Flusstypen",hfOnly:"Nur HF",sOnly:"Nur S",sortName:"Sortieren: Name",sortKValue:"Sortieren: K-Wert",sortFilament:"Sortieren: Filament",leftExtruder:"Linker Extruder",rightExtruder:"Rechter Extruder",modal:{addTitle:"K-Profil hinzufügen",editTitle:"K-Profil bearbeiten",profileName:"Profilname",profileNamePlaceholder:"Mein PLA-Profil",kValue:"K-Wert",kValuePlaceholder:"0,020",kValueHelp:"Typischer Bereich: 0,01 - 0,06 für PLA, 0,02 - 0,10 für PETG",filament:"Filament",selectFilament:"Filament auswählen...",noFilamentsHelp:"Keine Filamente gefunden. Erstellen Sie zuerst ein K-Profil in Bambu Studio.",flowType:"Flusstyp",highFlow:"High Flow",standard:"Standard",nozzleSize:"Düsengröße",extruder:"Extruder",extruders:"Extruder",left:"Links",right:"Rechts",notes:"Notizen (lokal gespeichert)",notesPlaceholder:"Notizen zu diesem Profil hinzufügen...",notesHelp:"Notizen werden in Bambuddy gespeichert, nicht auf dem Drucker",syncing:"Synchronisiert mit Drucker...",savingExtruder:"Speichern auf Extruder {{current}}/{{total}}...",pleaseWait:"Bitte warten"},deleteConfirm:{title:"Profil löschen",cannotUndo:"Dies kann nicht rückgängig gemacht werden",message:'Möchten Sie "{{name}}" wirklich vom Drucker löschen?'},bulkDelete:{title:"Profile löschen",cannotUndo:"Dies kann nicht rückgängig gemacht werden",message:"Möchten Sie wirklich {{count}} ausgewählte Profile vom Drucker löschen?"},toast:{profileSaved:"K-Profil gespeichert",profilesSaved:"K-Profil auf {{count}} Extrudern gespeichert",selectAtLeastOneExtruder:"Bitte wählen Sie mindestens einen Extruder aus",profileDeleted:"K-Profil gelöscht",profilesDeleted:"{{count}} Profile gelöscht",exportedProfiles:"{{count}} Profile exportiert",importedProfiles:"{{count}} von {{total}} Profilen importiert",noProfilesToExport:"Keine Profile zum Exportieren",invalidFileFormat:"Ungültiges Dateiformat",failedToParseImport:"Import-Datei konnte nicht gelesen werden",failedToSaveBatch:"K-Profile konnten nicht gespeichert werden",noteSaved:"Notiz gespeichert",failedToSaveNote:"Notiz konnte nicht gespeichert werden"},permission:{noRead:"Sie haben keine Berechtigung, Profile zu aktualisieren",noCreate:"Sie haben keine Berechtigung, Profile hinzuzufügen",noUpdate:"Sie haben keine Berechtigung, K-Profile zu aktualisieren",noDelete:"Sie haben keine Berechtigung, K-Profile zu löschen",noExport:"Sie haben keine Berechtigung, Profile zu exportieren",noImport:"Sie haben keine Berechtigung, Profile zu importieren"}},virtualPrinter:{title:"Virtueller Drucker",running:"Läuft",stopped:"Gestoppt",description:{default:"Aktiviere einen virtuellen Drucker, der in Bambu Studio und OrcaSlicer erscheint. Dateien, die an diesen Drucker gesendet werden, werden direkt archiviert ohne zu drucken.",proxy:"Aktiviere einen Proxy, der Slicer-Datenverkehr an einen echten Drucker weiterleitet, um Ferndruck über jedes Netzwerk zu ermöglichen."},enable:{title:"Virtuellen Drucker aktivieren",visibleInSlicer:'Sichtbar als "Bambuddy" in der Slicer-Erkennung',proxyingTo:"Proxy zu {{name}}",notActive:"Nicht aktiv"},model:{title:"Druckermodell",description:"Wähle welches Druckermodell emuliert werden soll.",restartWarning:"Das Ändern des Modells startet den virtuellen Drucker neu"},accessCode:{title:"Zugangscode",isSet:"Zugangscode ist gesetzt",notSet:"Kein Zugangscode gesetzt - erforderlich zum Aktivieren",placeholder:"8-Zeichen-Code eingeben",placeholderChange:"Neuen Code eingeben zum Ändern",hint:"Muss genau 8 Zeichen lang sein. Wird von Slicern zur Authentifizierung verwendet.",charCount:"({{count}}/8)"},targetPrinter:{title:"Zieldrucker",configured:"Proxy-Ziel konfiguriert",notConfigured:"Kein Zieldrucker ausgewählt - erforderlich für Proxy-Modus",placeholder:"Drucker auswählen...",hint:"Wähle den Drucker aus, an den der Slicer-Datenverkehr weitergeleitet werden soll. Der Drucker muss im LAN-Modus sein.",noPrinters:"Keine Drucker konfiguriert. Füge zuerst einen Drucker hinzu, um den Proxy-Modus zu verwenden."},remoteInterface:{title:"Netzwerkschnittstelle überschreiben",configured:"Schnittstellenüberschreibung aktiv",optional:"Optional - verwenden wenn die automatisch erkannte IP falsch ist (z.B. mehrere NICs, Docker, VPN)",placeholder:"Automatisch erkennen (Standard)...",hint:"Überschreibt die per SSDP beworbene und im TLS-Zertifikat verwendete IP-Adresse. Nützlich wenn Bambuddy mehrere Netzwerkschnittstellen hat."},mode:{title:"Modus",archive:"Archivieren",archiveDesc:"Dateien sofort archivieren",review:"Überprüfen",reviewDesc:"Vor dem Archivieren überprüfen",queue:"Warteschlange",queueDesc:"Archivieren und zur Warteschlange hinzufügen",proxy:"Proxy",proxyDesc:"An echten Drucker weiterleiten"},autoDispatch:{title:"Automatisch starten",description:"Drucke automatisch starten, wenn sie zur Warteschlange hinzugefügt werden. Wenn deaktiviert, warten Drucke auf manuellen Start."},tailscaleDisabled:{title:"Tailscale-Integration",description:"Wenn aktiviert, werden Tailscale-zertifizierte TLS-Zertifikate verwendet. Deaktivieren für selbstsignierte Zertifikate."},setupRequired:{title:"Einrichtung erforderlich",description:"Die virtuelle Druckerfunktion erfordert zusätzliche Systemkonfiguration, bevor sie funktioniert. Dies beinhaltet Portweiterleitung, Firewall-Regeln und plattformspezifische Einstellungen.",readGuide:"Lese die Einrichtungsanleitung vor dem Aktivieren"},archiveNameSource:{title:"Quelle des Archivnamens",description:'Lege fest, wie neue Archive benannt werden, wenn Dateien über den virtuellen Drucker eintreffen. "Metadaten" verwendet den im 3MF eingebetteten Titel des Slicers (Standard). "Dateiname" nutzt den Dateinamen, den Bambu Studio per FTP gesendet hat — praktisch, wenn der Job im Dialog "Zum Drucker senden" umbenannt wurde.',metadata:"Metadaten",filename:"Dateiname"},howItWorks:{title:"So funktioniert es",step1:"Im selben LAN erscheinen virtuelle Drucker automatisch in deinem Slicer (Bambu Studio / OrcaSlicer). Aus anderen Netzwerken füge sie manuell per IP-Adresse und Zugangscode hinzu.",step2:'Im Archiv-, Überprüfungs- und Warteschlangen-Modus verwende die "Senden"-Funktion im Slicer, um 3MF-Dateien an Bambuddy zu senden. Der Slicer zeigt "Druck erfolgreich" — die Datei wird gespeichert, nicht gedruckt.',step3:"Im Proxy-Modus leitet der virtuelle Drucker den gesamten Datenverkehr an einen echten Drucker weiter — Drucke starten sofort wie bei einer direkten Verbindung."},status:{title:"Status-Details",printerName:"Druckername",model:"Modell",serialNumber:"Seriennummer",mode:"Modus",pendingFiles:"Ausstehende Dateien",targetPrinter:"Zieldrucker",ftpPort:"FTP-Port",mqttPort:"MQTT-Port",ftpConnections:"FTP-Verbindungen",mqttConnections:"MQTT-Verbindungen"},toast:{updated:"Virtuelle Druckereinstellungen aktualisiert",failedToUpdate:"Einstellungen konnten nicht aktualisiert werden",tailscaleNotAvailable:"Tailscale ist auf diesem Host nicht installiert. Installiere Tailscale zuerst und versuche es dann erneut.",copyFailed:"Kopieren fehlgeschlagen — bitte Text manuell markieren",accessCodeRequired:"Bitte zuerst einen Zugangscode setzen",targetPrinterRequired:"Bitte zuerst einen Zieldrucker auswählen",bindIpRequired:"Bitte zuerst eine Bind-IP setzen",accessCodeEmpty:"Zugangscode darf nicht leer sein",accessCodeLength:"Zugangscode muss genau 8 Zeichen lang sein",created:"Virtueller Drucker erstellt",failedToCreate:"Virtueller Drucker konnte nicht erstellt werden",deleted:"Virtueller Drucker gelöscht",failedToDelete:"Virtueller Drucker konnte nicht gelöscht werden"},list:{title:"Virtuelle Drucker",add:"Hinzufügen",addFirst:"Virtuellen Drucker hinzufügen",empty:"Keine virtuellen Drucker konfiguriert. Fügen Sie einen hinzu, um zu beginnen."},bindIp:{title:"Bind-Interface",placeholder:"Interface auswählen...",hint:"Netzwerkinterface, an das dieser virtuelle Drucker gebunden wird. Muss pro Drucker eindeutig sein."},proxy:{accessCodeHint:"Im Proxy-Modus den Zugangscode des Zieldruckers im Slicer verwenden. Die Verbindung wird transparent zum echten Drucker weitergeleitet."},addDialog:{title:"Virtuellen Drucker hinzufügen",name:"Name",hint:"Sie können Zugangscode, Zieldrucker und andere Einstellungen nach dem Erstellen konfigurieren.",create:"Erstellen"},deleteConfirm:{title:"Virtuellen Drucker löschen",message:'Möchten Sie "{{name}}" wirklich löschen? Dies stoppt alle Dienste für diesen Drucker.'}},modelViewer:{openInSlicer:"Im Slicer öffnen",tabs:{model:"3D-Modell",gcode:"G-Code Vorschau"},notAvailable:"nicht verfügbar",notSliced:"nicht geslicet",plates:"Platten",allPlates:"Alle Platten",plateNumber:"Platte {{number}}",plateCount:"{{count}} Platte",plateCount_other:"{{count}} Platten",objectCount:"{{count}} Objekt",objectCount_other:"{{count}} Objekte",filamentCount:"{{count}} Filament",filamentCount_other:"{{count}} Filamente",eta:"ETA {{minutes}} Min",noPreview:"Keine Vorschau für diese Datei verfügbar",pagination:{pageOf:"Seite {{current}} von {{total}}",prev:"Zurück",next:"Weiter"},errors:{failedToLoad:"Datei konnte nicht geladen werden",noMeshes:"Keine Meshes in 3MF-Datei gefunden",unsupportedFormat:"Nicht unterstütztes Dateiformat"}},maintenanceDescriptions:{lubricateCarbonRods:"Schmiermittel auf Karbonstäbe für sanfte Bewegung auftragen",lubricateRails:"Schmiermittel auf Linearschienen für sanfte Bewegung auftragen",cleanNozzle:"Hotend und Düse reinigen, um Verstopfungen zu verhindern",checkBelts:"Riemenspannung für präzise Drucke überprüfen",cleanBuildPlate:"Druckplatte für bessere Haftung reinigen",checkExtruder:"Extruderzahnräder auf Verschleiß prüfen",checkCooling:"Sicherstellen, dass Lüfter ordnungsgemäß funktionieren",generalInspection:"Allgemeine Druckerinspektion",cleanCarbonRods:"Karbonstäbe reinigen, um Reibung zu reduzieren",lubricateSteelRods:"Schmiermittel auf Stahlstangen für sanfte Bewegung auftragen",cleanSteelRods:"Stahlstangen reinigen, um Reibung zu reduzieren",cleanLinearRails:"Linearschienen abwischen, um Staub und Schmutz zu entfernen",checkPtfeTube:"PTFE-Schlauch auf Verschleiß oder Beschädigung prüfen",replaceHepaFilter:"HEPA-Filter für Luftqualität ersetzen",replaceCarbonFilter:"Aktivkohlefilter ersetzen",lubricateLeftNozzleRail:"Linke Düsenschiene schmieren (H2-Serie)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Plug-Admin-Seite öffnen",deleteSmartPlug:"Smart Plug löschen",turnOnSmartPlug:"Smart Plug einschalten",turnOffSmartPlug:"Smart Plug ausschalten",turnOn:"Einschalten",turnOff:"Ausschalten",addSmartPlug:{scanningNetwork:"Netzwerk wird durchsucht...",chooseEntity:"Entität auswählen...",connectionFailed:"Verbindung fehlgeschlagen",searchEntities:"Entitäten suchen...",searchPowerSensors:"Leistungssensoren suchen...",searchEnergySensors:"Energiesensoren suchen...",placeholders:{plugName:"Wohnzimmer Steckdose",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Gleich wie Leistungs-Topic oder anders"}},linkedTo:"Verbunden mit:",monitorOnly:"Nur Überwachung",alerts:"Alarme",scheduleOn:"Ein {{time}}",scheduleOff:"Aus {{time}}",on:"Ein",off:"Aus",power:"Leistung",kwhToday:"kWh Heute",settings:"Einstellungen",automationSettings:"Automatisierungseinstellungen",showInSwitchbar:"In Schaltleiste anzeigen",quickAccessSidebar:"Schnellzugriff über Seitenleiste",enabled:"Aktiviert",enableAutomation:"Automatisierung für diesen Stecker aktivieren",autoOn:"Auto Ein",autoOnDescription:"Einschalten wenn Druck startet",autoOff:"Auto Aus",autoOffDescription:"Ausschalten wenn Druck abgeschlossen (einmalig)",autoOffPersistent:"Aktiviert lassen",autoOffPersistentDescription:"Zwischen Drucken aktiviert bleiben statt einmalig",turnOffDelayMode:"Ausschaltverzögerungsmodus",time:"Zeit",temp:"Temp",delayMinutes:"Verzögerung (Minuten)",tempThreshold:"Temperaturschwelle (°C)",tempThresholdDescription:"Schaltet aus wenn die Düse unter diese Temperatur abkühlt",edit:"Bearbeiten",deleteConfirm:'Möchten Sie "{{name}}" wirklich löschen? Dies kann nicht rückgängig gemacht werden.',turnOnConfirm:'Möchten Sie "{{name}}" wirklich einschalten?',turnOffConfirm:'Möchten Sie "{{name}}" wirklich ausschalten? Dies unterbricht die Stromversorgung des angeschlossenen Geräts.',failedToTurn:'{{name}}" konnte nicht {{action}} werden',unknown:"Unbekannt",addTitle:"Smart Plug hinzufügen",editTitle:"Smart Plug bearbeiten",stopScanning:"Suche beenden",discoverTasmota:"Tasmota Geräte suchen",foundDevices:"{{count}} Gerät(e) gefunden - zum Auswählen klicken:",noDevicesFound:"Keine Tasmota Geräte in Ihrem Netzwerk gefunden",haNotConfigured:"Home Assistant ist nicht konfiguriert. Einrichtung unter",haSettingsPath:"Einstellungen → Netzwerk → Home Assistant",selectEntity:"Entität auswählen *",ipAddress:"IP-Adresse *",nameLabel:"Name *",username:"Benutzername",password:"Passwort",authHint:"Leer lassen, wenn Ihr Tasmota-Gerät keine Authentifizierung benötigt",linkToPrinter:"Mit Drucker verbinden",noPrinter:"Kein Drucker (nur manuelle Steuerung)",linkingDescription:"Verknüpfung ermöglicht automatisches Ein-/Ausschalten bei Druckstart/-ende",powerAlerts:"Leistungsalarme",alertAbove:"Alarm wenn über (W)",alertBelow:"Alarm wenn unter (W)",alertDescription:"Benachrichtigung wenn der Stromverbrauch diese Schwellenwerte überschreitet. Leer lassen um diese Richtung zu deaktivieren.",dailySchedule:"Tagesplan",turnOnAt:"Einschalten um",turnOffAt:"Ausschalten um",scheduleDescription:"Den Stecker automatisch täglich zu diesen Zeiten ein-/ausschalten. Leer lassen um diese Aktion zu überspringen.",showOnPrinterCard:"Auf Druckerkarte anzeigen",displayOnPrinterCard:"Schaltfläche auf Druckerkarte anzeigen",connectedResult:"Verbunden!",deviceLabel:"Gerät: {{name}} - ",stateLabel:"Status: {{state}}",test:"Test",delete:"Löschen",save:"Speichern",add:"Hinzufügen",cancel:"Abbrechen",failedToStartScan:"Suche konnte nicht gestartet werden",nameRequired:"Name ist erforderlich",entityRequired:"Entität ist für Home Assistant Stecker erforderlich",mqttTopicRequired:"Mindestens ein MQTT-Topic muss für Leistung, Energie oder Statusüberwachung konfiguriert sein",loadingEntities:"Entitäten werden geladen...",loading:"Laden...",failedToLoadEntities:"Entitäten konnten nicht geladen werden: {{error}}",noEntitiesMatching:'Keine Entitäten gefunden die "{{search}}" entsprechen',noEntitiesAvailable:"Keine Entitäten verfügbar",searchingEntities:"Alle Entitäten durchsuchen ({{count}} gefunden)",showingEntities:"Zeige switch, light, input_boolean ({{count}} verfügbar)",energyMonitoringOptional:"Energieüberwachung (Optional)",energyMonitoringHint:"Sensoren suchen und auswählen, die Leistungs-/Energiedaten liefern.",powerSensorW:"Leistungssensor (W)",energyTodayKwh:"Energie Heute (kWh)",totalEnergyKwh:"Gesamtenergie (kWh)",noMatchingSensors:"Keine passenden Sensoren",none:"Keine",mqttNotConfigured:"MQTT-Broker nicht konfiguriert. Broker-Adresse einstellen unter",mqttSettingsPath:"Einstellungen → Netzwerk → MQTT-Veröffentlichung",mqttNotConfiguredSuffix:"(Sie müssen die Veröffentlichung nicht aktivieren, nur die Broker-Details ausfüllen).",mqttMonitorOnlyDescription:"MQTT-Stecker empfangen Leistungs-/Energiedaten über MQTT-Abonnement. Ein-/Ausschalten ist nicht verfügbar - verwenden Sie Ihren MQTT-Broker oder Ihr Home-Automation-System.",powerMonitoring:"Leistungsüberwachung",energyMonitoring:"Energieüberwachung",stateMonitoring:"Statusüberwachung",optional:"optional",topic:"Topic",jsonPath:"JSON-Pfad",multiplier:"Multiplikator",onValue:"EIN-Wert",mqttPowerHint:`JSON-Pfad extrahiert Wert aus JSON-Payload (z.B. "power_l1"). Leer lassen wenn Topic rohe numerische Werte sendet.
 Multiplikator 0.001 für mW→W, 1000 für kW→W verwenden.`,mqttEnergyHint:`JSON-Pfad extrahiert Wert aus JSON-Payload. Leer lassen für rohe Werte.
 Multiplikator 0.001 für Wh→kWh, 1000 für MWh→kWh verwenden.`,mqttStateHint:`JSON-Pfad extrahiert Wert aus JSON-Payload. Leer lassen für rohe Werte.
-EIN-Wert: der genaue String der "EIN" bedeutet. Leer lassen für Auto-Erkennung (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"Power URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"Power Multiplikator",restEnergyUrl:"Energie URL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Energie Multiplikator",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"Eigene URL für Leistungsdaten (nutzt Status URL wenn leer)",restEnergyUrlHint:"Eigene URL für Energiedaten (nutzt Status URL wenn leer)",restEnergyHint:"Jeder Wert kann eine eigene URL verwenden oder auf die Status URL zurückgreifen. Multiplikatoren für Einheitenumrechnung verwenden (z.B. 0.001 für Wh zu kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"Keine Schalter in der Schaltleiste",enableSwitchbarHint:'"In Schaltleiste anzeigen" unter Einstellungen > Smart Plugs aktivieren'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-Mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP-E-Mail-Benachrichtigungen",telegram:"Benachrichtigungen über Telegram-Bot",discord:"An Discord-Kanal per Webhook senden",ntfy:"Kostenlose, selbst-hostbare Push-Benachrichtigungen",pushover:"Einfache, zuverlässige Push-Benachrichtigungen",callmebot:"Kostenlose WhatsApp-Benachrichtigungen über CallMeBot",webhook:"Generischer HTTP-POST an beliebige URL",homeassistant:"Dauerhafte Benachrichtigungen im Home Assistant Dashboard"},lastSuccess:"Zuletzt: {{date}}",error:"Fehler",printer:"Drucker:",allPrinters:"Alle Drucker",sendTestNotification:"Testbenachrichtigung senden",eventSettings:"Ereigniseinstellungen",enabled:"Aktiviert",sendFromProvider:"Benachrichtigungen von diesem Anbieter senden",printEvents:"Druckereignisse",printerStatus:"Druckerstatus",amsAlarms:"AMS-Alarme",amsHtAlarms:"AMS-HT-Alarme",printQueue:"Druckwarteschlange",start:"Start",plateCheck:"Plattenkontrolle",complete:"Abgeschlossen",failed:"Fehlgeschlagen",stopped:"Gestoppt",progress:"Fortschritt",offline:"Offline",lowFilament:"Filament niedrig",maintenance:"Wartung",amsHumidity:"AMS-Feuchtigkeit",amsTemp:"AMS-Temperatur",amsHtHumidity:"AMS-HT-Feuchtigkeit",amsHtTemp:"AMS-HT-Temperatur",bedCooled:"Bett abgekühlt",firstLayer:"Erste Schicht",quiet:"Ruhe",digest:"Zusammenfassung {{time}}",printStarted:"Druck gestartet",plateNotEmpty:"Platte nicht leer",plateNotEmptyDescription:"Objekte vor dem Druck erkannt",printCompleted:"Druck abgeschlossen",bedCooledLabel:"Bett abgekühlt",bedCooledDescription:"Bett nach dem Druck unter Schwellenwert abgekühlt",firstLayerCompleteLabel:"Erste Schicht fertig",firstLayerCompleteDescription:"Benachrichtigung mit Foto nach erster Schicht",missingSpoolAssignmentLabel:"Fehlende Spulenzuordnung",missingSpoolAssignmentDescription:"Benachrichtigen, wenn ein Druck startet und benoetigte Schaechte keine zugeordnete Spule haben",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",progressMilestones:"Fortschrittsmeilensteine",progressMilestonesDescription:"Benachrichtigung bei 25%, 50%, 75%",printerOffline:"Drucker offline",printerError:"Druckerfehler",lowFilamentLabel:"Filament niedrig",maintenanceDue:"Wartung fällig",maintenanceDueDescription:"Benachrichtigen, wenn Wartung erforderlich ist",amsHumidityHigh:"AMS-Feuchtigkeit hoch",amsHumidityHighDescription:"Normale AMS-Feuchtigkeit überschreitet Schwellenwert",amsTemperatureHigh:"AMS-Temperatur hoch",amsTemperatureHighDescription:"Normale AMS-Temperatur überschreitet Schwellenwert",amsHtHumidityHigh:"AMS-HT-Feuchtigkeit hoch",amsHtHumidityHighDescription:"AMS-HT-Feuchtigkeit überschreitet Schwellenwert",amsHtTemperatureHigh:"AMS-HT-Temperatur hoch",amsHtTemperatureHighDescription:"AMS-HT-Temperatur überschreitet Schwellenwert",jobAdded:"Auftrag hinzugefügt",jobAddedDescription:"Auftrag zur Warteschlange hinzugefügt",jobAssigned:"Auftrag zugewiesen",jobAssignedDescription:"Modellbasierter Auftrag einem Drucker zugewiesen",jobStarted:"Auftrag gestartet",jobStartedDescription:"Warteschlangenauftrag hat Druck begonnen",jobWaiting:"Auftrag wartet",jobWaitingDescription:"Auftrag wartet auf Filament oder Drucker",jobSkipped:"Auftrag übersprungen",jobSkippedDescription:"Auftrag übersprungen (vorheriger fehlgeschlagen)",jobFailed:"Auftrag fehlgeschlagen",jobFailedDescription:"Auftrag konnte nicht gestartet werden",queueComplete:"Warteschlange abgeschlossen",queueCompleteDescription:"Alle Warteschlangenaufträge beendet",quietHours:"Ruhezeiten",noNotificationsDuring:"Keine Benachrichtigungen während dieser Zeiten",editProviderToChangeQuietHours:"Anbieter bearbeiten, um Ruhezeiten zu ändern",dailyDigest:"Tägliche Zusammenfassung",batchNotifications:"Benachrichtigungen zu einer täglichen Zusammenfassung bündeln",sendAt:"Senden um {{time}}",editProviderToChangeDigestTime:"Anbieter bearbeiten, um Zusammenfassungszeit zu ändern",edit:"Bearbeiten",deleteProvider:"Benachrichtigungsanbieter löschen",deleteConfirm:'Sind Sie sicher, dass Sie "{{name}}" löschen möchten? Dies kann nicht rückgängig gemacht werden.',delete:"Löschen",addTitle:"Benachrichtigungsanbieter hinzufügen",editTitle:"Benachrichtigungsanbieter bearbeiten",nameLabel:"Name *",namePlaceholder:"Meine Benachrichtigungen",providerTypeLabel:"Anbietertyp *",configuration:"Konfiguration",testConfiguration:"Konfiguration testen",printerFilter:"Druckerfilter",onlyFromPrinter:"Nur Benachrichtigungen für Ereignisse von diesem Drucker senden",quietHoursDnd:"Ruhezeiten (Nicht stören)",quietStart:"Start",quietEnd:"Ende",dailyDigestLabel:"Tägliche Zusammenfassung",sendDigestAt:"Zusammenfassung senden um",digestCollected:"Ereignisse werden gesammelt und als einzelne Zusammenfassung zu dieser Zeit gesendet",notificationEvents:"Benachrichtigungsereignisse",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(nach Druckabschluss)",eventPriority:{sectionTitle:"ntfy-Priorität",helpNtfy:"Wähle eine Priorität pro aktiviertem Ereignis. ntfy nutzt diese, um Hinweise (Ton, Sichtbarkeit, Push-Verhalten) zu eskalieren. Hier nicht gesetzte Stufen verwenden den ntfy-Server-Standard.",min:"Min",low:"Niedrig",default:"Standard",high:"Hoch",urgent:"Dringend"},cancel:"Abbrechen",save:"Speichern",add:"Hinzufügen",nameRequired:"Name ist erforderlich",fieldRequired:"{{field}} ist erforderlich",phoneNumber:"Telefonnummer",apiKey:"API-Schlüssel",serverUrl:"Server-URL",topic:"Thema",authToken:"Auth-Token",userKey:"Benutzerschlüssel",appToken:"App-Token",priority:"Priorität",botToken:"Bot-Token",chatId:"Chat-ID",smtpServer:"SMTP-Server",smtpPort:"SMTP-Port",security:"Sicherheit",authentication:"Authentifizierung",username:"Benutzername",password:"Passwort",fromEmail:"Absender-E-Mail",toEmail:"Empfänger-E-Mail",webhookUrl:"Webhook-URL",payloadFormat:"Payload-Format",authorization:"Autorisierung",titleFieldName:"Titel-Feldname",messageFieldName:"Nachrichten-Feldname",editTemplate:"Vorlage bearbeiten: {{name}}",titleLabel:"Titel",bodyLabel:"Inhalt",titlePlaceholder:"Benachrichtigungstitel...",bodyPlaceholder:"Benachrichtigungsinhalt...",availableVariables:"Verfügbare Variablen",clickToInsert:"Klicken, um an Cursorposition im Inhalt einzufügen",livePreview:"Live-Vorschau",hide:"Ausblenden",show:"Anzeigen",loadingPreview:"Vorschau wird geladen...",enterTemplateContent:"Vorlageninhalt eingeben, um Vorschau zu sehen",titlePreview:"Titel:",bodyPreview:"Inhalt:",resetToDefault:"Auf Standard zurücksetzen",titleRequired:"Titel ist erforderlich",bodyRequired:"Inhalt ist erforderlich",notificationLog:"Benachrichtigungsprotokoll",showFailedOnly:"Nur fehlgeschlagene",last24Hours:"Letzte 24 Stunden",last7Days:"Letzte 7 Tage",last30Days:"Letzte 30 Tage",last90Days:"Letzte 90 Tage",justNow:"Gerade eben",noFailedNotifications:"Keine fehlgeschlagenen Benachrichtigungen",noNotificationsLogged:"Keine Benachrichtigungen protokolliert",unknownProvider:"Unbekannter Anbieter",logTitle:"Titel",logMessage:"Nachricht",logError:"Fehler",logProvider:"Anbieter: {{type}}",logTime:"Zeit: {{time}}",refresh:"Aktualisieren",clearOld:"Alte löschen",statsSummary:"Letzte {{days}} Tage:",statsNotifications:"Benachrichtigungen",statsSent:"{{count}} gesendet",statsFailed:"{{count}} fehlgeschlagen",eventTypes:{print_start:"Druck gestartet",print_complete:"Druck abgeschlossen",print_failed:"Druck fehlgeschlagen",print_stopped:"Druck gestoppt",print_progress:"Fortschritt",printer_offline:"Drucker offline",printer_error:"Druckerfehler",filament_low:"Filament niedrig",maintenance_due:"Wartung fällig",test:"Test"},userEmail:{title:"Benachrichtigungen",emailNotifications:"E-Mail-Benachrichtigungen",emailNotificationsDesc:"Erhalten Sie E-Mail-Benachrichtigungen für Ihre eigenen Druckaufträge. E-Mails werden über die in der erweiterten Authentifizierung konfigurierten SMTP-Einstellungen gesendet.",sendingTo:"Benachrichtigungen werden gesendet an",noEmailWarning:"Ihr Konto hat keine E-Mail-Adresse. Wenden Sie sich an einen Administrator, um eine hinzuzufügen.",printJobNotifications:"Druckauftrags-Benachrichtigungen",printJobNotificationsDesc:"Wählen Sie aus, welche Ereignisse E-Mail-Benachrichtigungen für von Ihnen gesendete Druckaufträge auslösen.",printJobStarts:"Druckauftrag startet",printJobStartsDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag beginnt.",printJobFinishes:"Druckauftrag fertig",printJobFinishesDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag erfolgreich abgeschlossen wurde.",printErrors:"Druckfehler",printErrorsDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag fehlschlägt oder auf einen Fehler stößt.",printJobStops:"Druckauftrag gestoppt",printJobStopsDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag abgebrochen oder gestoppt wird.",saveSuccess:"Benachrichtigungseinstellungen gespeichert.",saveError:"Benachrichtigungseinstellungen konnten nicht gespeichert werden."}},richTextEditor:{bold:"Fett",italic:"Kursiv",underline:"Unterstrichen",bulletList:"Aufzählungsliste",numberedList:"Nummerierte Liste",alignLeft:"Linksbündig",alignCenter:"Zentriert",alignRight:"Rechtsbündig",addLink:"Link hinzufügen",removeLink:"Link entfernen"},externalLinks:{noLinksConfigured:"Keine externen Links konfiguriert",deleteLink:"Link löschen",removeCustomIcon:"Benutzerdefiniertes Symbol entfernen",openInNewTab:"In neuem Tab öffnen",placeholders:{linkName:"Mein Link"}},keyboardShortcuts:{title:"Tastaturkürzel",navigation:"Navigation",archivesSection:"Archive",kProfilesSection:"K-Profile",generalSection:"Allgemein",shortcuts:{goToPrinters:"Zu Drucker gehen",goToArchives:"Zu Archiv gehen",goToQueue:"Zur Warteschlange gehen",goToStats:"Zu Statistiken gehen",goToProfiles:"Zu Cloud-Profilen gehen",goToSettings:"Zu Einstellungen gehen",focusSearch:"Suche fokussieren",openUploadModal:"Upload-Modal öffnen",clearSelection:"Auswahl löschen / Eingabe aufheben",contextMenu:"Kontextmenü auf Karten",refreshProfiles:"Profile aktualisieren",newProfile:"Neues Profil",exitSelectionMode:"Auswahlmodus beenden",showHelp:"Diese Hilfe anzeigen"},footer:"Drücken Sie Esc oder klicken Sie außerhalb, um zu schließen"},notificationLog:{title:"Benachrichtigungsprotokoll",events:{printStarted:"Druck gestartet",printComplete:"Druck abgeschlossen",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",progress:"Fortschritt",printerOffline:"Drucker offline",printerError:"Druckerfehler",lowFilament:"Wenig Filament",maintenanceDue:"Wartung fällig",test:"Test"},timeAgo:{justNow:"Gerade eben",minutesAgo:"vor {{minutes}}m",hoursAgo:"vor {{hours}}h"}},restoreBackup:{title:"Backup wiederherstellen",restoring:"Wird wiederhergestellt...",restoreComplete:"Wiederherstellung abgeschlossen",restoreFailed:"Wiederherstellung fehlgeschlagen",importSettings:"Einstellungen aus Backup-Datei importieren",pleaseWait:"Bitte warten Sie, während Ihre Daten wiederhergestellt werden",clickToSelect:"Klicken Sie, um Backup-Datei auszuwählen (.json oder .zip)",howDuplicateHandling:"So funktioniert die Duplikatbehandlung:",categories:{printers:"Drucker",smartPlugs:"Smart Plugs",notificationProviders:"Benachrichtigungsanbieter",filaments:"Filamente",archives:"Archive",pendingUploads:"Ausstehende Uploads",settingsTemplates:"Einstellungen & Vorlagen"},matchingInfo:{printers:"abgeglichen nach Seriennummer",smartPlugs:"abgeglichen nach IP-Adresse",notificationProviders:"abgeglichen nach Name",filaments:"abgeglichen nach Name + Typ + Marke",archives:"abgeglichen nach Inhalts-Hash",pendingUploads:"abgeglichen nach Dateiname",settingsTemplates:"immer überschrieben"},replaceExisting:"Vorhandene Daten ersetzen",keepExisting:"Vorhandene Daten behalten",replaceDescription:"Bereits vorhandene Elemente mit Backup-Daten überschreiben",keepDescription:"Nur Elemente wiederherstellen, die noch nicht existieren",caution:"Vorsicht:",cautionText:"Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Backup-Daten. Drucker-Zugangscodes werden aus Sicherheitsgründen niemals überschrieben.",itemsRestored:"Wiederhergestellte Elemente",itemsSkipped:"Übersprungene Elemente",restored:"Wiederhergestellt",skipped:"Übersprungen (existieren bereits)",filesLabel:"Dateien (3MF, Thumbnails, etc.)",newApiKeysGenerated:"Neue API-Schlüssel generiert",newApiKeysWarning:"Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!",processingBackup:"Backup-Datei wird verarbeitet...",noDataFound:"In der Backup-Datei wurden keine wiederherzustellenden Daten gefunden.",failedToRestore:"Backup konnte nicht wiederhergestellt werden. Bitte überprüfen Sie das Dateiformat."},backupExport:{title:"Backup exportieren",selectData:"Zu exportierende Daten auswählen",selectAll:"Alle auswählen",selectNone:"Keine auswählen",categoryDescriptions:{settings:"Sprache, Theme, Update-Einstellungen",notifications:"ntfy, Pushover, Discord, usw.",templates:"Benutzerdefinierte Nachrichtenvorlagen",smartPlugs:"Tasmota-Plug-Konfigurationen",externalLinks:"Seitenleiste Links zu externen Diensten",printers:"Druckerinformationen (Zugangscodes ausgeschlossen)",plateDetection:"Leere Platten-Referenzbilder",filaments:"Filamenttypen und -kosten",maintenance:"Benutzerdefinierte Wartungspläne",archives:"Alle Druckdaten + Dateien (3MF, Thumbnails, Fotos)",projects:"Projekte, BOM-Elemente und Anhänge",pendingUploads:"Virtueller Drucker-Uploads zur Überprüfung",apiKeys:"Webhook-API-Schlüssel (neue Schlüssel bei Import generiert)"},requiresPrinters:"Drucker müssen ausgewählt sein",zipFileWarning:"ZIP-Datei wird erstellt.",zipFileDescription:"Enthält alle 3MF-Dateien, Thumbnails, Zeitraffer und Fotos. Dies kann eine Weile dauern und zu einer großen Datei führen.",includeAccessCodes:"Zugangscodes einschließen",includeAccessCodesDescription:"Für die Übertragung auf eine andere Maschine",includeAccessCodesWarning:"Zugangscodes werden im Klartext eingeschlossen. Bewahren Sie diese Backup-Datei sicher auf!",categoriesSelected:"{{selectedCount}} Kategorien ausgewählt"},pendingUploads:{placeholders:{notes:"Notizen zu diesem Druck hinzufügen..."},discardUpload:"Upload verwerfen",archiveAllUploads:"Alle Uploads archivieren",discardAllUploads:"Alle Uploads verwerfen",archive:"Archivieren",timeAgo:{justNow:"Gerade eben",minutesAgo:"vor {{minutes}}m",hoursAgo:"vor {{hours}}h",daysAgo:"vor {{days}}d"}},apiBrowser:{placeholders:{requestBody:"JSON-Anforderungstext...",searchEndpoints:"Endpunkte suchen..."}},configureAmsSlot:{title:"AMS-Slot konfigurieren",slotConfigured:"Slot konfiguriert!",configuringSlot:"Slot wird konfiguriert:",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Voreinstellungen suchen...",colorPlaceholder:"Farbname oder Hex (z.B. braun, FF8800)",clearCustomColor:"Benutzerdefinierte Farbe löschen",noCloudPresets:"Keine Cloud-Voreinstellungen. Melden Sie sich bei Bambu Cloud an, um zu synchronisieren.",noPresetsAvailable:"Keine Voreinstellungen verfügbar. Melden Sie sich bei Bambu Cloud an oder importieren Sie lokale Profile.",noMatchingPresets:"Keine passenden Voreinstellungen gefunden.",custom:"Benutzerdefiniert",builtin:"Integriert",settingsSentToPrinter:"Einstellungen an Drucker gesendet",filamentProfile:"Filamentprofil",kProfileLabel:"K-Profil (Pressure Advance)",filteringFor:"Filtern nach: {{material}}",noKProfile:"Kein K-Profil (Standard 0.020 verwenden)",noMatchingKProfiles:"Keine passenden K-Profile gefunden. Standard K=0.020 wird verwendet.",selectFilamentFirst:"Zuerst ein Filamentprofil auswählen",kFromCalibration:"K={{value}} aus Druckerkalibrierung",customColorLabel:"Benutzerdefinierte Farbe (optional)",presetColors:"{{name}} Farben:",showLessColors:"Weniger Farben anzeigen",showMoreColors:"Mehr Farben anzeigen",clear:"Löschen",hexLabel:"Hex: #{{hex}}",resetting:"Wird zurückgesetzt...",resetSlot:"Slot zurücksetzen",cancel:"Abbrechen",configuring:"Wird konfiguriert...",configureSlot:"Slot konfigurieren"},githubBackup:{title:"GitHub-Backup",history:"Verlauf",downloadBackup:"Backup herunterladen",restoreBackup:"Backup wiederherstellen",noBackupsYet:"Noch keine Backups"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Tags suchen...",renameTag:"Tag umbenennen",deleteTag:"Tag löschen"},notificationTemplates:{placeholders:{title:"Benachrichtigungstitel...",body:"Benachrichtigungstext..."}},batchTag:{placeholders:{newTag:"Neuen Tag eingeben..."}},photoGallery:{deletePhoto:"Foto löschen"},filamentHoverCard:{copySpoolUuid:"Spulen-UUID kopieren"},kProfilesView:{hasNote:"Hat Notiz",copyProfile:"Profil kopieren"},layout:{openMenu:"Menü öffnen",noPermissionSystemInfo:"Sie haben keine Berechtigung zum Anzeigen von Systeminformationen"},dashboard:{dragToReorder:"Ziehen zum Neuordnen",hideWidget:"Widget ausblenden"},notificationProviderCard:{deleteNotificationProvider:"Benachrichtigungsanbieter löschen"},fileManagerModal:{closeFileManager:"Dateimanager schließen",sortFiles:"Dateien sortieren",goToParentFolder:"Zum übergeordneten Ordner gehen",threeView:"3D-Ansicht"},embeddedCameraViewer:{refreshStream:"Stream aktualisieren",close:"Schließen",zoomOut:"Verkleinern",resetZoom:"Zoom zurücksetzen",zoomIn:"Vergrößern",dragToResize:"Ziehen zum Größe ändern"},timelapseViewer:{skipBack5s:"5s zurückspringen",skipForward5s:"5s vorspringen"},notificationProviders:{descriptions:{email:"SMTP-E-Mail-Benachrichtigungen",telegram:"Benachrichtigungen über Telegram-Bot",discord:"An Discord-Kanal über Webhook senden",ntfy:"Kostenlose, selbst hostbare Push-Benachrichtigungen",pushover:"Einfache, zuverlässige Push-Benachrichtigungen",callmebot:"Kostenlose WhatsApp-Benachrichtigungen über CallMeBot",webhook:"Generischer HTTP POST zu beliebiger URL"}},logViewer:{searchPlaceholder:"Nachricht oder Logger-Name suchen...",noLogEntries:"Keine Logeinträge gefunden"},switchbarPopover:{noSwitchesInSwitchbar:"Keine Schalter in Schalterleiste"},projectPageModal:{placeholders:{title:"Titel",designer:"Designer",license:"Lizenz",description:"Beschreibung eingeben...",profileTitle:"Profil-Titel",profileDescription:"Profilbeschreibung..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Wartend",justNow:"Gerade eben",now:"Jetzt",minsAgo:"vor {{count}}m",inMins:"in {{count}}m",hoursAgo:"vor {{count}}h",inHours:"in {{count}}h",daysAgo:"vor {{count}}d",inDays:"in {{count}}d"},spoolbuddy:{nav:{dashboard:"Dashboard",ams:"AMS",inventory:"Inventar",writeTag:"Schreiben",settings:"Einstellungen"},status:{nfcReady:"NFC bereit",nfcOff:"NFC aus",offline:"Offline",online:"Online",noPrinters:"Keine Drucker",deviceOffline:"Gerät offline",waitingConnection:"Warte auf Geräteverbindung...",systemReady:"System bereit",status:"Status"},dashboard:{readyToScan:"Bereit zum Scannen",idleMessage:"Spule auf die Waage legen zum Identifizieren",nfcHint:"NFC-Tag wird automatisch gelesen",device:"Gerät",syncWeight:"Gewicht sync.",weightSynced:"Synchronisiert!",unknownTag:"Unbekannter Tag",newTag:"Neuer Tag erkannt",onScale:"auf der Waage",linkSpool:"Mit Spule verknüpfen",linkTagTitle:"Tag mit Spule verknüpfen",linkTag:"Tag verknüpfen",selectSpool:"Spule zum Verknüpfen auswählen:",noUntagged:"Keine Spulen ohne Tags gefunden",tagDetected:"Tag erkannt",noTag:"Kein Tag",tagId:"Tag",grossWeight:"Bruttogewicht",spoolSize:"Spulengröße",close:"Schließen",currentSpool:"Aktuelle Spule",plateReady:"Druckplatte bereit: {{name}}",plateReadyLabel:"Bereit-zum-Quittieren-Liste",plateClearAction:"Frei",plateClearedToast:"Druckplatte als geleert markiert",plateClearFailed:"Druckplatte konnte nicht als geleert markiert werden"},modal:{spoolDetected:"Spule erkannt",assignToAms:"AMS zuweisen",syncWeight:"Gewicht sync.",weightSynced:"Synchronisiert!",syncing:"Synchronisiere...",newTagDetected:"Neuer Tag erkannt",addToInventory:"Zum Inventar hinzufügen",assignToAmsTitle:"AMS zuweisen",selectSlot:"Slot auswählen",assign:"Zuweisen",assigning:"Zuweisen...",assignSuccess:"Zugewiesen!",assignError:"Fehler beim Zuweisen. Bitte erneut versuchen.",noPrinterSelected:"Drucker auswählen...",noAmsDetected:"Kein AMS an diesem Drucker erkannt",slot:"Slot"},weight:{noReading:"Kein Messwert",stable:"Stabil",measuring:"Messen...",tare:"Tarieren",calibrate:"Kalibrieren"},spool:{remaining:"Verbleibend",material:"Material",brand:"Marke",color:"Farbe",coreWeight:"Kern",labelWeight:"Etikett",scaleWeight:"Waage",netWeight:"Netto",lastUsed:"Zuletzt verwendet"},ams:{noData:"Kein AMS erkannt",connectAms:"AMS anschließen um Filament-Slots zu sehen",noPrinter:"Kein Drucker ausgewählt",selectPrinter:"Drucker in der oberen Leiste auswählen",printerDisconnected:"Drucker getrennt",humidity:"Feuchtigkeit",level:"Stufe",active:"Aktiv",slot:"Slot",empty:"Leer"},inventory:{search:"Spulen suchen...",empty:"Keine Spulen im Inventar",noResults:"Keine passenden Spulen",spools:"Spulen",addSpool:"Spule hinzufügen"},settings:{tabDevice:"Gerät",tabDisplay:"Anzeige",tabScale:"Waage",tabUpdates:"Updates",nfcReader:"NFC-Leser",type:"Typ",connection:"Verbindung",notConnected:"N/A",deviceInfo:"Geräteinfo",hostname:"Host",uptime:"Betriebszeit",systemConfig:"Backend & Auth",backendUrl:"Bambuddy Backend URL",apiToken:"API-Token",apiTokenPlaceholder:"API-Token eingeben",saveConfig:"Konfiguration speichern",systemQueued:"Konfiguration in Warteschlange.",nfcDiagnostic:"NFC-Diagnose",scaleDiagnostic:"Waagen-Diagnose",readTagDiagnostic:"Tag-Lese-Diagnose",testNfc:"Leser testen",testScale:"Genauigkeit testen",testReadTag:"Tag lesen",systemFieldsRequired:"Backend-URL ist erforderlich.",brightness:"Helligkeit",saved:"Gespeichert",noBacklight:"Keine DSI-Hintergrundbeleuchtung erkannt. Helligkeitssteuerung erfordert ein DSI-Display.",screenBlank:"Bildschirm-Abschaltzeit",screenBlankDesc:"Bildschirm schaltet sich nach Inaktivität ab. Zum Aufwecken berühren.",displayNote:"Helligkeit wird als Software-Filter angewendet.",scaleCalibration:"Waagen-Kalibrierung",currentWeight:"Aktuelles Gewicht",tareOffset:"Tara",calFactor:"Faktor",knownWeight:"Bekanntes Gewicht",calStep1:"Alle Gegenstände von der Waage entfernen und Nullpunkt setzen.",calStep2:"Bekanntes Gewicht auf die Waage legen.",setZero:"Nullpunkt setzen",calibrateNow:"Kalibrieren",calibrated:"Kalibriert",tareSet:"Tara-Befehl gesendet. Warte auf Gerät...",tareFailed:"Tara-Befehl fehlgeschlagen",zeroSet:"Nullpunkt gesetzt. Bekanntes Gewicht auf die Waage legen.",calibrationDone:"Kalibrierung abgeschlossen!",calibrationFailed:"Kalibrierung fehlgeschlagen",lastCalibrated:"Zuletzt kalibriert",stable:"Stabil",settling:"Stabilisierung...",firmware:"Firmware",scale:"Waage",noDevice:"Kein SpoolBuddy-Gerät gefunden",daemonVersion:"Daemon-Version",currentVersion:"Aktuell",versionPending:"Warte auf Daemon...",checking:"Prüfe...",checkUpdates:"Nach Updates suchen",updateAvailable:"Update verfügbar",updateInstructions:"Update per SSH: SpoolBuddy-Installationsskript ausführen.",upToDate:"Aktuell",includeBeta:"Beta-Versionen einschließen"},writeTag:{tabExisting:"Vorhandene Spule",tabNew:"Neue Spule",tabReplace:"Tag ersetzen",searchPlaceholder:"Suche nach Material, Farbe, Marke...",noUntaggedSpools:"Keine Spulen ohne Tags",noTaggedSpools:"Keine Spulen mit Tags",selectSpool:"Spule auswählen, dann einen NTAG auf den Leser legen",placeTag:"NTAG auf den Leser legen",tagReady:"Tag erkannt — bereit zum Schreiben",writeTag:"Tag beschreiben",replaceTag:"Tag ersetzen",writing:"Tag wird beschrieben...",waiting:"Warte auf SpoolBuddy...",writeSuccess:"Tag erfolgreich beschrieben!",writeFailed:"Schreiben fehlgeschlagen",queueFailed:"Schreibbefehl konnte nicht eingereiht werden",tryAgain:"Erneut versuchen",cancel:"Abbrechen",replaceWarning:"Alter Tag wird getrennt. Neuer Tag ersetzt ihn.",deviceOffline:"SpoolBuddy ist offline",material:"Material",colorName:"Farbname",color:"Farbe",brand:"Marke",weight:"Gewicht (g)",createSpool:"Spule erstellen",creating:"Wird erstellt...",spoolCreated:"Spule erstellt! Bereit zum Schreiben.",createFailed:"Spule konnte nicht erstellt werden"},quickMenu:{printerPower:"Drucker-Strom",systemControls:"System",restartDaemon:"Daemon neustarten",restartBrowser:"Browser neustarten",reboot:"Neustart",shutdown:"Herunterfahren",swipeToClose:"Nach unten wischen zum Schließen",confirmTitle:"Bestätigen",confirmShutdown:"Möchten Sie das SpoolBuddy wirklich herunterfahren? Sie benötigen physischen Zugang, um es wieder einzuschalten.",confirmReboot:"Möchten Sie das SpoolBuddy wirklich neu starten?",confirmRestartDaemon:"SpoolBuddy-Daemon neustarten? NFC und Waage sind vorübergehend nicht verfügbar.",confirmRestartBrowser:"Kiosk-Browser neustarten? Das Display wird kurz schwarz.",confirm:"Bestätigen",confirmPlugOn:"{{name}} einschalten?",confirmPlugOff:"{{name}} ausschalten?",turnOn:"Einschalten",turnOff:"Ausschalten"}},bugReport:{title:"Fehler melden",description:"Beschreibung",descriptionPlaceholder:"Was ist schiefgelaufen? Bitte beschreiben Sie das Problem...",email:"E-Mail (optional)",emailPlaceholder:"ihre@email.de",emailPrivacy:"Falls angegeben, wird Ihre E-Mail in einem eingeklappten Abschnitt des GitHub-Issues aufgeführt, damit der Betreuer sich melden kann.",screenshot:"Screenshot",uploadOrPaste:"Bild hochladen, einfügen oder ziehen",dataCollectedSummary:"Welche Daten werden im Bericht gesendet?",dataIncluded:"Enthalten:",dataIncludedList:"App-Version, Betriebssystem, Architektur, Python-Version, Datenbankstatistiken (nur Anzahl), Druckermodelle, Düsenanzahl, Firmware-Versionen, Verbindungsstatus, Integrationsstatus (Spoolman, MQTT, HA), nicht-sensible Einstellungen, Netzwerkschnittstellenanzahl, Docker-Details, Abhängigkeitsversionen.",dataNeverIncluded:"Nie enthalten:",dataNeverIncludedList:"Druckernamen, Seriennummern, Zugangscodes, Passwörter, IP-Adressen, E-Mail-Adressen, API-Schlüssel, Tokens, Webhook-URLs, Hostnamen oder Benutzernamen.",submit:"Absenden",startLogging:"Debug-Protokollierung starten",stepEnableLogging:"Debug-Protokollierung aktiviert",stepReproduce:"Problem jetzt reproduzieren",stepStopLogging:"Stoppen & Bericht senden",stopAndSubmit:"Stoppen & Senden",maxDuration:"Stoppt automatisch nach {{minutes}} Min.",stoppingLogs:"Protokolle sammeln & senden...",submitting:"Fehlerbericht wird gesendet...",submitSuccess:"Fehlerbericht erfolgreich gesendet!",submitFailed:"Fehlerbericht konnte nicht gesendet werden",thankYou:"Vielen Dank!",submitted:"Ihr Fehlerbericht wurde eingereicht.",viewIssue:"Issue ansehen",unexpectedError:"Ein unerwarteter Fehler ist aufgetreten"},failureDetection:{title:"KI-Fehlererkennung",description:"Überwacht Drucke über eine selbst gehostete Obico-ML-API und reagiert automatisch auf erkannte Fehldrucke.",mlUrl:"Obico-ML-API-URL",mlUrlHint:"Basis-URL deines selbst gehosteten Obico-ml_api-Containers (z. B. http://192.168.1.10:3333).",test:"Testen",testSuccess:"ML-API erreichbar und funktionsfähig.",testFailed:"ML-API konnte nicht erreicht werden.",sensitivity:"Empfindlichkeit",sensitivityLow:"Niedrig (weniger Fehlalarme)",sensitivityMedium:"Mittel (ausgewogen)",sensitivityHigh:"Hoch (frühe Erkennung, mehr Fehlalarme)",sensitivityHint:"Passt die Konfidenz-Schwellwerte an, die Warnungen und Fehler auslösen.",action:"Aktion bei erkanntem Fehler",actionNotify:"Nur benachrichtigen",actionPause:"Druck pausieren",actionPauseOff:"Pausieren und Strom abschalten",pollInterval:"Prüfintervall (Sekunden)",pollIntervalHint:"Wie oft jeder Drucker während eines laufenden Drucks geprüft wird. Minimum 5 s, Maximum 120 s.",externalUrlMissing:"Externe URL ist nicht gesetzt.",externalUrlHint:"Die ML-API ruft das Kamera-Snapshot per URL ab. Setze die externe URL in den allgemeinen Einstellungen, damit der ML-API-Container Bambuddy erreichen kann.",perPrinterTitle:"Überwachte Drucker",perPrinterHint:"Wähle, welche Drucker vom Erkennungsdienst überwacht werden.",monitorAll:"Alle verbundenen Drucker überwachen",statusTitle:"Status",serviceRunning:"Dienst läuft",thresholds:"Niedrig / Hoch-Schwellwerte",activePrinters:"Aktive Drucke",noActivePrints:"Derzeit laufen keine Drucke.",historyTitle:"Letzte Erkennungen",noHistory:"Noch keine Erkennungen."},makerworld:{title:"MakerWorld",description:"Füge eine MakerWorld-Modell-URL ein, um es direkt aus Bambuddy zu importieren und zu drucken — ohne die Bambu Handy App zu öffnen.",pasteUrlHeader:"Von MakerWorld importieren",pasteUrlPlaceholder:"https://makerworld.com/de/models/… oder beliebigen MakerWorld-Link einfügen",resolveButton:"Laden",signInRequiredTitle:"Bambu-Cloud-Anmeldung für Download erforderlich",signInRequiredBody:"Modell-Details können anonym angezeigt werden, aber MakerWorld verlangt eine Bambu-Cloud-Anmeldung zum Herunterladen der 3MF-Dateien.",openCloudSettings:"Cloud-Einstellungen öffnen",untitledModel:"Unbenanntes Modell",byCreator:"von {{name}}",downloadsCount:"{{count}} Downloads",licensePrefix:"Lizenz",alreadyImported:"Bereits in Bibliothek",openOnMakerworld:"Auf MakerWorld öffnen",alreadyInLibrary:"Dieses Modell ist bereits in deiner Bibliothek — zu finden im Dateimanager → MakerWorld",importSuccess:"{{filename}} importiert — gespeichert im Dateimanager → MakerWorld",platesHeader:"Platten ({{count}})",plateDefaultName:"Platte {{n}}",materialCount:"{{count}} Filamente",amsRequired:"AMS erforderlich",slicedFor:"Gesliced für {{printer}}",alsoCompatible:"Auch kompatibel: {{printers}}",importToLibrary:"Speichern",sliceIn:"Speichern & in {{slicer}} öffnen",disclaimer:"Die MakerWorld-Integration verwendet von der Community dokumentierte API-Endpunkte. Bambuddy ist nicht mit MakerWorld oder Bambu Lab verbunden oder von diesen unterstützt.",lastImportSuccess:"In deine Bibliothek importiert",lastImportAlreadyInLibrary:"Bereits in deiner Bibliothek",viewInLibrary:"Im Dateimanager anzeigen",openInBambuStudio:"In Bambu Studio öffnen",openInOrcaSlicer:"In OrcaSlicer öffnen",importTo:"In Dateimanager importieren",recentImportsHeader:"Zuletzt importiert",phaseResolving:"Auflösen",phaseDownloading:"Lade herunter",folderAuto:"MakerWorld (Standard)",importAll:"Alle importieren",importAllProgress:"Importiere {{current}}/{{total}}",openGallery:"Bildergalerie öffnen",galleryPrev:"Vorheriges Bild",galleryNext:"Nächstes Bild",deleteImport:"Aus Bibliothek entfernen",importDeleting:"Wird entfernt…",importDeleted:"Aus Bibliothek entfernt",confirmDelete:"{{filename}} aus der Bibliothek entfernen? Die lokale Datei wird gelöscht, die Platte kann aber erneut von MakerWorld importiert werden.",errors:{resolveFailed:"Diese MakerWorld-URL konnte nicht aufgelöst werden.",downloadFailed:"Download fehlgeschlagen. Bitte erneut versuchen.",deleteFailed:"Datei konnte nicht aus der Bibliothek entfernt werden."}},libraryTrash:{title:"Papierkorb",headerButton:"Papierkorb",headerTooltip:"In den Papierkorb verschobene Dateien anzeigen",backToFiles:"Zurück zum Dateimanager",subtitleAdmin:"Gelöschte Dateien bleiben {{days}} Tage hier und werden dann automatisch entfernt. Diese Ansicht zeigt Papierkorb-Dateien aller Benutzer.",subtitleUser:"Gelöschte Dateien bleiben {{days}} Tage hier und werden dann automatisch entfernt.",loading:"Papierkorb wird geladen…",loadError:"Papierkorb konnte nicht geladen werden.",empty:"Der Papierkorb ist leer.",summary:"{{count}} Dateien · {{size}}",emptyTrash:"Papierkorb leeren",restore:"Wiederherstellen",purgeNow:"Jetzt löschen",autoPurgeIn:"Wird in {{when}} gelöscht",days:"Tage",retentionLabel:"Automatisch löschen nach",selectAll:"Alle auswählen",selectOne:"{{filename}} auswählen",selectionCount:"{{count}} ausgewählt",bulkRestore:"Auswahl wiederherstellen",bulkPurge:"Auswahl löschen",col:{filename:"Datei",folder:"Ordner",size:"Größe",deleted:"Verschoben",autoPurge:"Löschung",owner:"Besitzer",actions:"Aktionen"},confirm:{purgeTitle:"Endgültig löschen?",purgeBody:"{{filename}} wird von der Festplatte gelöscht und kann nicht wiederhergestellt werden.",emptyTitle:"Papierkorb leeren?",emptyBody:"Alle {{count}} Dateien werden endgültig von der Festplatte gelöscht.",bulkPurgeTitle:"Ausgewählte Dateien endgültig löschen?",bulkPurgeBody:"Die {{count}} ausgewählten Dateien werden von der Festplatte gelöscht und können nicht wiederhergestellt werden.",cta:"Endgültig löschen"},toast:{restored:"Datei wiederhergestellt.",restoreFailed:"Datei konnte nicht wiederhergestellt werden.",purged:"Datei endgültig gelöscht.",purgeFailed:"Datei konnte nicht gelöscht werden.",emptied:"{{count}} Datei(en) aus dem Papierkorb gelöscht.",emptyFailed:"Papierkorb konnte nicht geleert werden.",retentionSaved:"Automatisches Löschen auf {{days}} Tage gesetzt.",retentionFailed:"Einstellung konnte nicht gespeichert werden.",bulkRestored:"{{count}} Datei(en) wiederhergestellt.",bulkPurged:"{{count}} Datei(en) gelöscht."}},libraryPurge:{title:"Alte Dateien entfernen",headerButton:"Alte entfernen",headerTooltip:"Alte Dateien im Block in den Papierkorb verschieben",description:"Räume alte Dateien in einem Rutsch aus deiner Bibliothek. Dateien mit Druckverlauf werden nach dem letzten Druckdatum bewertet; nie gedruckte Dateien nach dem Upload-Datum.",ageLabel:"Dateien älter als",days:"Tage",includeNeverPrinted:"Dateien einbeziehen, die nie gedruckt wurden",effectsTitle:'Was passiert, wenn du auf „Entfernen" klickst',effect1:"Passende Dateien werden in den Papierkorb verschoben — noch nicht von der Festplatte gelöscht.",effect2:"Du kannst sie bis zum Ablauf der Aufbewahrungsfrist jederzeit wiederherstellen.",effect3:"Nach Ablauf der Frist löscht der Papierkorb-Sweeper sie endgültig von der Festplatte.",effect4:"Dateien in externen (verknüpften) Ordnern werden übersprungen — Bambuddy löscht keine Bytes, die ihm nicht gehören.",previewLoading:"Prüfe, wie viele Dateien passen…",previewFailed:"Vorschau konnte nicht geladen werden.",previewSummary:"{{count}} Dateien · {{size}} würden in den Papierkorb verschoben",andMore:"…und {{count}} weitere",warning:"Dateien im Papierkorb zählen weiterhin zum Speicher, bis die Aufbewahrungsfrist abgelaufen ist. Leere den Papierkorb danach, um sofort Speicher freizugeben.",confirmCta:"{{count}} in den Papierkorb verschieben",purging:"Wird verschoben…",toast:{success:"{{count}} Datei(en) in den Papierkorb verschoben.",failed:"Dateien konnten nicht verschoben werden."}},libraryAutoPurge:{enableLabel:"Alte Dateien automatisch entfernen",enableDescription:"Führt die Admin-Bereinigung einmal pro Tag aus. Dateien landen zuerst im Papierkorb — sie werden nicht sofort gelöscht.",ageLabel:"Dateien älter als",ageDescription:"Minimum 7 Tage, Maximum 10 Jahre. Verwendet dieselbe Altersregel wie die manuelle „Alte entfernen“-Schaltfläche.",days:"Tage",includeNeverPrinted:"Dateien einbeziehen, die nie gedruckt wurden",saveFailed:"Einstellungen konnten nicht gespeichert werden."},archivePurge:{headerButton:"Alte löschen",headerTooltip:"Alte Archive in einem Rutsch löschen",title:"Alte Archive löschen",description:"Räume alte Druckhistorie auf. Jedes Archiv wird nach seinem letzten abgeschlossenen Druck bewertet — ein erneuter Druck setzt die Frist zurück, aktive Arbeit bleibt sicher.",ageLabel:"Archive löschen, die zuletzt gedruckt wurden vor",days:"Tage",effectsTitle:'Was passiert, wenn du auf „Löschen" klickst',effect1:"Jedes passende Archiv wird endgültig aus der Datenbank entfernt.",effect2:"Die 3MF-Datei, Vorschau, Timelapse, Quell-3MF, F3D-Designdatei und der Foto-Ordner werden von der Festplatte gelöscht.",effect3:"Es gibt keinen Papierkorb für Archive — die Löschung ist sofort und unwiderruflich.",effect4:"Ein erneuter Druck setzt die Frist zurück, Archive, die du weiterhin nutzt, bleiben sicher.",previewLoading:"Prüfe passende Archive…",previewFailed:"Vorschau konnte nicht erstellt werden.",previewSummary:"{{count}} Archive · {{size}} werden gelöscht",andMore:"…und {{count}} weitere",warning:"Dies ist endgültig. Lade wichtige Archive vorher herunter oder markiere sie als Favorit.",confirmCta:"{{count}} Archiv(e) löschen",purging:"Lösche…",toast:{success:"{{count}} Archiv(e) gelöscht.",failed:"Archive konnten nicht gelöscht werden."}},archiveAutoPurge:{enableLabel:"Alte Archive automatisch löschen",enableDescription:"Löscht einmal pro Tag Archive endgültig, die im angegebenen Zeitraum nicht gedruckt wurden. Ein erneuter Druck setzt die Frist zurück. Kein Papierkorb — die Löschung erfolgt sofort.",ageLabel:"Archive automatisch löschen, die zuletzt gedruckt wurden vor",ageDescription:"Minimum 7 Tage, Maximum 10 Jahre. Basiert auf dem letzten abgeschlossenen Druck — ein erneuter Druck setzt die Frist zurück. Löscht Archiv, 3MF, Vorschaubild, Timelapse und Fotos.",days:"Tage",runNow:"Archive jetzt löschen",saveFailed:"Einstellungen konnten nicht gespeichert werden."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},wme={nav:{printers:"Imprimantes",archives:"Archives",queue:"File d'attente",stats:"Statistiques",profiles:"Profils",maintenance:"Maintenance",projects:"Projets",inventory:"Filament",files:"Gestionnaire de fichiers",makerworld:"MakerWorld",notifications:"Notifications",settings:"Paramètres",system:"Système",collapseSidebar:"Réduire la barre latérale",expandSidebar:"Développer la barre latérale",update:"Mise à jour",updateAvailable:"Mise à jour disponible : v{{version}}",updateAvailableBanner:"La version {{version}} est disponible !",viewUpdate:"Voir la mise à jour",viewOnGithub:"Voir sur GitHub",keyboardShortcuts:"Raccourcis clavier (?)",switchToLight:"Passer au mode clair",switchToDark:"Passer au mode sombre",smartSwitches:"Interrupteurs intelligents",logout:"Déconnexion"},common:{save:"Enregistrer",saving:"Enregistrement...",cancel:"Annuler",delete:"Supprimer",edit:"Modifier",add:"Ajouter",close:"Fermer",confirm:"Confirmer",loading:"Chargement...",error:"Erreur",success:"Succès",warning:"Avertissement",enabled:"Activé",disabled:"Désactivé",yes:"Oui",no:"Non",on:"On",off:"Off",all:"Tous",none:"Aucun",search:"Rechercher",filter:"Filtrer",sort:"Trier",refresh:"Actualiser",download:"Télécharger",upload:"Téléverser",uploading:"Téléversement...",uploadFailed:"Échec du téléversement",actions:"Actions",status:"Statut",name:"Nom",description:"Description",date:"Date",time:"Heure",hours:"heures",minutes:"minutes",seconds:"secondes",days:"jours",enable:"Activer",disable:"Désactiver",permissions:"Autorisations",noPrinters:"Aucune imprimante configurée",noData:"Aucune donnée disponible",linkNotFound:"Lien non trouvé",required:"Requis",optional:"Optionnel",dismiss:"Ignorer",apply:"Appliquer",reset:"Réinitialiser",export:"Exporter",import:"Importer",clear:"Effacer",selectAll:"Tout sélectionner",deselectAll:"Tout désélectionner",noChange:"— Aucun changement —",unchanged:"Inchangé",unassigned:"Non assigné",unknown:"Inconnu",unknownError:"Erreur inconnue",today:"Aujourd'hui",tomorrow:"Demain",asap:"Dès que possible",overdue:"En retard",now:"Maintenant",collapse:"Réduire",expand:"Développer",viewArchive:"Voir l'archive",viewInFileManager:"Voir dans le gestionnaire de fichiers",addedBy:"Ajouté par {{username}}",prints:"impressions",more:"+{{count}} de plus",ascending:"Croissant",descending:"Décroissant",back:"Retour",copy:"Copier",copied:"Copié !",printer:"Imprimante",remove:"Retirer",type:"Type",print:"Imprimer",rename:"Renommer",move:"Déplacer",create:"Créer",duplicate:"Dupliquer",left:"Gauche",right:"Droite"},printers:{title:"Imprimantes",addPrinter:"Ajouter une imprimante",editPrinter:"Modifier l'imprimante",deletePrinter:"Supprimer l'imprimante",printerName:"Nom de l'imprimante",serialNumber:"Numéro de série",ipAddress:"Adresse IP / Nom d'hôte",accessCode:"Code d'accès",model:"Modèle",nozzleCount:"Nombre de buses",autoArchive:"Auto-archivage",status:{available:"Disponible",idle:"Inactif",printing:"Impression en cours",paused:"En pause",offline:"Hors ligne",problem:"Problème",error:"Erreur",finished:"Terminé",unknown:"Inconnu"},temperatures:{nozzle:"Buse",bed:"Plateau",chamber:"Chambre"},progress:"{{percent}}% terminé",timeRemaining:"{{time}} restant",deleteConfirm:'Êtes-vous sûr de vouloir supprimer "{{name}}" ?',maintenanceOk:"Maintenance OK",maintenanceWarning:"{{count}} avertissement",maintenanceWarning_plural:"{{count}} avertissements",maintenanceDue:"{{count}} échéance",maintenanceDue_plural:"{{count}} échéances",sort:{name:"Nom",status:"Statut",model:"Modèle",location:"Emplacement",ascending:"Tri croissant",descending:"Tri décroissant"},cardSize:{small:"Petites cartes",medium:"Cartes moyennes",large:"Grandes cartes",extraLarge:"Très grandes cartes"},hideOffline:"Masquer hors ligne",nextAvailable:"Prochaine disponible",powerOn:"Allumer",offlinePrintersWithPlugs:"Imprimantes hors ligne avec prises connectées",noPrintersConfigured:"Aucune imprimante configurée pour le moment",search:"Rechercher des imprimantes...",noSearchResults:"Aucune imprimante ne correspond à votre recherche ou à vos filtres",filter:{allStatuses:"Tous les statuts",allLocations:"Tous les emplacements"},readyToPrint:"Prête à imprimer",external:"Externe",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Supprimer les archives d'impression",noLabel:"Pas d'étiquette",printPreview:"Aperçu avant impression",width:"Largeur",height:"Hauteur",noObjectsFound:"Aucun objet trouvé",objectsLoadedOnPrintStart:"Les objets sont chargés au début de l'impression",willBeSkipped:"Sera sauté",name:"Nom",serialCannotBeChanged:"Le numéro de série ne peut pas être modifié",locationHelp:"Utilisé pour grouper les imprimantes et filtrer la file d'attente",wifiSignal:{veryWeak:"Très faible",weak:"Faible",fair:"Moyen",good:"Bon",excellent:"Excellent"},maintenanceUpToDate:"Maintenance à jour - Cliquez pour voir",chamberLightOn:"Allumer la lumière de la chambre",chamberLightOff:"Éteindre la lumière de la chambre",files:"Fichiers",browseFiles:"Parcourir les fichiers de l'imprimante",autoOffAfterPrint:"Extinction auto après impression",autoOffExecuted:"Extinction auto exécutée - rallumez pour réinitialiser",hmsErrors:"Erreurs HMS",viewHmsErrors:"Voir {{count}} erreur(s) HMS",resume:"Reprendre",pause:"Pause",stop:"Arrêter",camera:"Caméra",skipObject:"Sauter l'objet",reconnect:"Reconnecter",forceRefresh:"Forcer l'actualisation",forceRefreshSuccess:"Actualisation demandée",mqttDebug:"Débogage MQTT",printerInformation:"Informations imprimante",copyToClipboard:"Copier",copied:"Copié !",state:"État",wifiSignalLabel:"Signal WiFi",developerMode:"Mode développeur",enabled:"Activé",disabled:"Désactivé",addedOn:"Ajoutée le",sdCard:"Carte SD",inserted:"Insérée",notInserted:"Non insérée",totalPrintHours:"Heures d'impression",activeNozzle:"Active : buse {{nozzle}}",nozzleRack:"Rack à buses",nozzleDocked:"Rangée",nozzleMounted:"Montée",nozzleActive:"Active",nozzleIdle:"Inactive",nozzleDiameter:"Diamètre",nozzleType:"Type",nozzleStatus:"Statut",nozzleFilament:"Filament",nozzleWear:"Usure",nozzleMaxTemp:"Temp Max",nozzleSerial:"Série",nozzleHardenedSteel:"Acier Trempé",nozzleStainlessSteel:"Acier Inoxydable",nozzleTungstenCarbide:"Carbure de Tungstène",nozzleFlow:"Débit",nozzleHighFlow:"Haut débit",nozzleStandardFlow:"Standard",firmwareUpdate:"Mise à jour Firmware",firmwareInstructions:"Sur l'écran de l'imprimante, allez dans",firmwareNav:"Naviguez vers",settings:"Paramètres",firmware:"Firmware",discoverPrinters:"Découvrir les imprimantes",searching:"Recherche...",manualEntry:"Saisie manuelle",addFromCloud:"Ajouter depuis le Cloud",toast:{printerDeleted:"Imprimante supprimée",missingSpoolAssignment:"Impression démarrée sur {{printer}}. Attribution de bobine manquante pour : {{slots}}",printerAdded:"Imprimante ajoutée",printerUpdated:"Imprimante mise à jour",failedToDelete:"Échec de la suppression",failedToAdd:"Échec de l'ajout",failedToUpdate:"Échec de la mise à jour",commandSent:"Commande envoyée",failedToSendCommand:"Échec de l'envoi de la commande",turnedOn:"{{name}} allumée",failedToPowerOn:"Échec de l'allumage de {{name}}",scriptTriggered:"Script déclenché",printStopped:"Impression arrêtée",printPaused:"Impression en pause",printResumed:"Impression reprise",referenceDeleted:"Référence supprimée",detectionAreaSaved:"Zone de détection enregistrée",failedToRunScript:"Échec du script",failedToStopPrint:"Échec de l'arrêt",failedToPausePrint:"Échec de la mise en pause",failedToResumePrint:"Échec de la reprise",failedToControlChamberLight:"Échec du contrôle de la lumière",failedToSetSpeed:"Échec du réglage de la vitesse",failedToUpdateSetting:"Échec de mise à jour du paramètre",failedToSkipObjects:"Échec du saut d'objets",failedToRereadRfid:"Échec lecture RFID",failedToCheckPlate:"Échec vérification plateau",failedToUpdateLabel:"Échec mise à jour étiquette",failedToDeleteReference:"Échec suppression référence",failedToSaveDetectionArea:"Échec enregistrement zone",plateCheckEnabled:"Vérification plateau activée",plateCheckDisabled:"Vérification plateau désactivée",calibrationSaved:"Calibration enregistrée !",calibrationFailed:"Échec de la calibration",rfidRereadInitiated:"Lecture RFID initiée"},connection:{connected:"Connecté",offline:"Hors ligne"},plateStatus:{markCleared:"Marquer le plateau comme dégagé",cleared:"Plateau dégagé",notCleared:"Plateau non dégagé",inUse:"Plateau en cours d'utilisation"},queue:{inQueue:"{{count}} impression en file",inQueue_plural:"{{count}} impressions en file"},controls:"Contrôles",rfid:{reread:"Relire RFID"},bedJog:{title:"Déplacer le plateau",bed:"Plateau",step:"Pas (mm)",up:"Monter le plateau",down:"Descendre le plateau",disabledWhilePrinting:"Désactivé pendant l'impression",notHomedTitle:"Imprimante non référencée",notHomedMessage:"L'imprimante n'a pas été référencée depuis la dernière impression. Lancez la référence automatique d'abord pour un positionnement sûr (parque la tête d'outil, puis référence X, Y et Z), ou déplacez quand même — les butées logicielles seront ignorées.",homeZ:"Référence automatique",moveAnyway:"Déplacer quand même",homingStarted:"Référencement automatique en cours…"},permission:{noAdd:"Pas d'autorisation pour ajouter",noEdit:"Pas d'autorisation pour modifier",noDelete:"Pas d'autorisation pour supprimer",noControl:"Pas d'autorisation pour contrôler",noFiles:"Pas d'autorisation pour les fichiers",noAmsRfid:"Pas d'autorisation pour le RFID",noSmartPlugControl:"Pas d'autorisation pour les prises",noCamera:"Pas d'autorisation pour les caméras"},modal:{addTitle:"Ajouter une imprimante",editTitle:"Modifier l'imprimante",myPrinter:"Mon imprimante",selectModel:"Choisir un modèle...",locationGroup:"Emplacement / Groupe (optionnel)",locationPlaceholder:"ex: Atelier, Bureau",autoArchiveLabel:"Auto-archiver les impressions terminées",fromPrinterSettings:"Depuis les paramètres imprimante",modelOptional:"Modèle (optionnel)",saveChanges:"Enregistrer les modifications"},skipObjects:{tooltip:"Sauter des objets",onlyWhilePrinting:"Sauter (uniquement pendant l'impression)",requiresMultiple:"Sauter (nécessite 2+ objets)",title:"Sauter des objets",matchIdsInfo:"Faites correspondre les IDs avec l'écran de l'imprimante",printerShowsIds:"L'écran affiche les IDs des objets sur le plateau",skipSelected:"Sauter la sélection",skipping:"Saut en cours...",noObjectsSelected:"Aucun objet sélectionné",selectObjectsToSkip:"Sélectionnez les objets à ignorer",skipped:"sauté",objectsSkipped:"Objets sautés",activeCount:"{{count}} actifs",waitForLayer:"Attendez la couche 2 pour sauter des objets (actuelle : {{layer}})",skip:"Sauter",confirmTitle:"Sauter l'objet ?",confirmMessage:'Voulez-vous vraiment sauter "{{name}}" ? Cette action est irréversible.'},confirm:{deleteTitle:"Supprimer l'imprimante",deleteMessage:'Supprimer "{{name}}" ? Cela retirera tous les paramètres de connexion.',deleteArchivesNote:"Tout l'historique sera définitivement supprimé.",keepArchivesNote:"L'historique sera conservé mais plus associé à cette imprimante.",stopTitle:"Arrêter l'impression",stopMessage:`Arrêter l'impression sur "{{name}}" ?`,stopButton:"Arrêter",pauseTitle:"Mettre en pause",pauseMessage:`Mettre en pause l'impression sur "{{name}}" ?`,pauseButton:"Pause",resumeTitle:"Reprendre l'impression",resumeMessage:`Reprendre l'impression sur "{{name}}" ?`,resumeButton:"Reprendre",powerOnTitle:"Allumer l'imprimante",powerOnMessage:'Allumer "{{name}}" ?',powerOnButton:"Allumer",powerOffTitle:"Éteindre l'imprimante",powerOffMessage:'Éteindre "{{name}}" ?',powerOffWarning:`ATTENTION : "{{name}}" imprime ! L'éteindre maintenant peut endommager l'imprimante.`,powerOffButton:"Éteindre"},bulk:{select:"Sélectionner",selectAll:"Tout sélectionner",selectByLocation:"Sélectionner par emplacement",selected:"{{count}} sélectionné(s)",actions:{stop:"Arrêter",pause:"Pause",resume:"Reprendre",clearPlate:"Vider le plateau",clearHMS:"Effacer les notifications"},confirm:{stopTitle:"Arrêter {{count}} impressions",stopMessage:"Cela annulera les impressions actives sur {{count}} imprimante(s). Cette action est irréversible.",stopButton:"Tout arrêter",pauseTitle:"Mettre en pause {{count}} impressions",pauseMessage:"Cela mettra en pause les impressions actives sur {{count}} imprimante(s).",pauseButton:"Tout mettre en pause",clearPlateTitle:"Vider {{count}} plateaux",clearPlateMessage:"Cela videra le plateau sur {{count}} imprimante(s) et pourrait lancer les travaux en file d'attente.",clearPlateButton:"Tout vider"},success:"{{action}} terminé sur {{count}} imprimante(s)",partial:"{{succeeded}} réussi(s), {{failed}} échoué(s)",noneApplicable:"Aucune imprimante sélectionnée n'est dans le bon état pour cette action",selectByState:"Sélectionner par état"},discovery:{title:"Découvrir les imprimantes",searching:"Recherche...",scanning:"Scan en cours...",scanProgress:"Scan... {{scanned}}/{{total}}",foundPrinters:"{{count}} imprimante(s) trouvée(s)",noPrintersFound:"Aucune imprimante trouvée",noPrintersFoundSubnet:"Aucune imprimante dans ce sous-réseau.",noPrintersFoundNetwork:"Aucune imprimante sur le réseau.",allConfigured:"Toutes les imprimantes trouvées sont déjà configurées.",alreadyAdded:"Déjà ajoutée",select:"Sélectionner",manualEntry:"Saisie manuelle",addFromCloud:"Ajouter depuis le Cloud",subnetToScan:"Sous-réseau à scanner",dockerNote:"Docker détecté. Entrez le sous-réseau en notation CIDR. Nécessite network_mode: host.",scanSubnet:"Scanner le sous-réseau",discoverNetwork:"Découvrir sur le réseau",scanningSubnet:"Scan du sous-réseau pour imprimantes Bambu...",scanningNetwork:"Scan du réseau...",serialRequired:"Série requis",unknown:"Inconnu",failedToStart:"Échec du démarrage de la découverte"},drying:{start:"Démarrer le séchage",stop:"Arrêter le séchage",temperature:"Température",duration:"Durée",hours:"heures",timeRemaining:"{{time}} restant",active:"Séchage",notSupported:"Séchage non pris en charge",powerRequired:"Brancher l'adaptateur secteur AMS pour activer le séchage",startingDrying:"Démarrage du séchage...",stoppingDrying:"Arrêt du séchage...",rotateTray:"Tourner la bobine pendant le séchage"},filaments:"Filaments",openCameraOverlay:"Ouvrir la caméra en superposition",openCameraWindow:"Ouvrir la caméra dans une fenêtre",firmwareUpdateAvailable:"Mise à jour firmware : {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — À jour",firmwareUpdateButton:"Mettre à jour",plateDetection:{noPermission:"Pas d'autorisation de modification",enabledClick:"Vérification activée - Cliquez pour désactiver",disabledClick:"Vérification désactivée - Cliquez pour activer",manageCalibration:"Gérer la calibration de détection",calibrationRequired:"Calibration requise",calibrationInstructions:"Videz le plateau, puis cliquez sur Calibrer.",calibrationDescription:"Capture une image de référence du plateau vide.",calibrationTip:"Conseil : Stockez jusqu'à 5 références. Le système utilise la meilleure correspondance.",plateEmpty:"Le plateau semble vide",objectsDetected:"Objets détectés sur le plateau",confidence:"Confiance",difference:"Différence",analysisPreview:"Aperçu de l'analyse :",analysisLegend:"Cadre vert = zone, Rouge = différences",savedReferences:"Références ({{count}}/{{max}})",deleteReference:"Supprimer la référence",labelPlaceholder:"Étiquette...",clickToEdit:"{{label}} - Modifier",clickToAddLabel:"Ajouter une étiquette"},speed:{title:"Vitesse d'impression",silent:"Silencieux (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Mode conduit d'air",cooling:"Refroidissement",heating:"Chauffage"},noSdCard:"Pas de SD",door:{open:"Ouverte",closed:"Fermée"},fans:{partCooling:"Ventilateur pièce",auxiliary:"Ventilateur auxiliaire",chamber:"Ventilateur chambre"},clickToViewHmsErrors:"Cliquez pour voir les erreurs HMS",estimatedCompletion:"Fin estimée",plateNumber:"Plaque {{number}}",slotOptions:"Options du slot",amsPopup:{friendlyName:"Nom AMS",friendlyNamePlaceholder:"ex. Nom convivial AMS",serialNumber:"Numéro de série",firmwareVersion:"Firmware",save:"Enregistrer",clear:"Effacer",noEditPermission:"Vous n'avez pas la permission de renommer les unités AMS"},firmwareModal:{title:"Mise à jour Firmware",titleUpToDate:"Infos Firmware",currentVersion:"Actuelle :",latestVersion:"Dernière :",releaseNotes:"Notes de version",checkingPrereqs:"Vérification des prérequis...",sdCardReady:"Carte SD prête. Cliquez pour téléverser.",uploadedSuccess:"Firmware téléversé !",applyInstructions:"Pour appliquer sur l'imprimante :",step1:"Sur l'écran, allez dans Paramètres",step2:"Allez dans Firmware",step3:'Sélectionnez "Mettre à jour depuis carte SD"',step4:"Prévoyez 10-20 minutes",done:"Terminé",starting:"Démarrage...",uploadFirmware:"Téléverser le Firmware",uploadFailed:"Échec du téléversement : {{error}}",uploadedToast:"Firmware téléversé ! Lancez la mise à jour sur l'écran.",availableVersions:"Versions disponibles",usable:"Utilisable",unavailable:"Indisponible",installed:"Installé",newerBadge:"plus récent",olderBadge:"plus ancien",currentBadge:"actuel"},accessCodePlaceholder:"Laissez vide pour garder l'actuel",roi:{title:"Zone de détection (ROI)",xStart:"Début X",yStart:"Début Y",width:"Largeur",height:"Hauteur",instruction:"Ajustez le cadre vert pour cibler le plateau."},developerModeWarning:"Le mode développeur LAN n'est pas activé sur : {{names}}. Certaines fonctionnalités peuvent ne pas fonctionner.",howToEnable:"Comment activer",incompatibleFile:"Ce fichier a été tranché pour {{slicedFor}}, mais cette imprimante est une {{printerModel}}",dropNotPrintable:"Seuls les fichiers .gcode et .gcode.3mf peuvent être imprimés",dropToPrint:"Déposer pour imprimer",cannotPrint:"Imprimante occupée"},archives:{title:"Archives d'impression",searchPlaceholder:"Chercher dans les archives...",filterByPrinter:"Par imprimante",filterByStatus:"Par statut",sortBy:"Trier par",sortNewest:"Plus récent",sortOldest:"Plus ancien",sortName:"Nom",sortDuration:"Durée",sortLargest:"Plus volumineux",sortSmallest:"Plus léger",sortSize:"Taille",noArchives:"Aucune archive trouvée",noArchivesSearch:"Aucune archive ne correspond",originalPrintNotVisible:"Impression d'origine non visible - essayez d'effacer les filtres",noArchivesYet:"Pas encore d'archive",prints:"impressions",pagination:{showing:"Affichage",to:"à",of:"sur",show:"Afficher",page:"Page",all:"Tout"},loadingArchives:"Chargement...",releaseToUpload:"Relâcher pour téléverser",showAll:"Tout afficher",showFavoritesOnly:"Favoris uniquement",gridView:"Grille",listView:"Liste",calendarView:"Calendrier",logView:"Journal d'impression",manageTags:"Gérer les tags",showFailedPrints:"Afficher les échecs",hideFailedPrints:"Masquer les échecs",hideDuplicates:"Masquer les doublons",viewOriginalPrint:"Cliquez pour afficher l'impression originale (#{{id}})",printTime:"Temps d'impression",filamentUsed:"Filament utilisé",cost:"Coût",reprint:"Réimprimer",preview:"Aperçu",deleteArchive:"Supprimer l'archive",deleteConfirm:"Supprimer cette archive ?",favorite:"Favori",unfavorite:"Retirer des favoris",viewDetails:"Détails",status:{completed:"Réussi",failed:"Échoué",stopped:"Arrêté"},toast:{source3mfAttached:"Source 3MF attachée : {{filename}}",failedUploadSource3mf:"Échec téléversement 3MF",source3mfRemoved:"Source 3MF retirée",failedRemoveSource3mf:"Échec retrait 3MF",f3dAttached:"F3D attaché : {{filename}}",failedUploadF3d:"Échec téléversement F3D",f3dRemoved:"F3D retiré",failedRemoveF3d:"Échec retrait F3D",timelapseAttached:"Timelapse attaché : {{filename}}",timelapseAlreadyAttached:"Timelapse déjà présent",noMatchingTimelapse:"Pas de timelapse correspondant",failedScanTimelapse:"Échec scan timelapse",failedAttachTimelapse:"Échec attache timelapse",timelapseRemoved:"Timelapse supprimé",failedRemoveTimelapse:"Échec de la suppression du timelapse",timelapseUploaded:"Timelapse importé : {{filename}}",failedUploadTimelapse:"Échec de l'importation du timelapse",archiveDeleted:"Archive supprimée",failedDeleteArchive:"Échec suppression",addedToFavorites:"Ajouté aux favoris",removedFromFavorites:"Retiré des favoris",projectUpdated:"Projet mis à jour",failedUpdateProject:"Échec mise à jour projet",linkCopied:"Lien copié",failedCopyLink:"Échec copie lien",photoDeleted:"Photo supprimée",failedDeletePhoto:"Échec suppression photo",failedDeleteArchives:"Échec suppression archives",failedUpdateFavorites:"Échec mise à jour favoris",exportDownloaded:"Export téléchargé",exportFailed:"Échec export"},menu:{print:"Imprimer",schedule:"Planifier",openInBambuStudio:"Ouvrir dans le Slicer",slice:"Découper",externalLink:"Lien externe",viewOnMakerWorld:"Voir sur MakerWorld",preview3d:"Aperçu 3D",viewTimelapse:"Voir le Timelapse",scanForTimelapse:"Scanner pour Timelapse",uploadTimelapse:"Importer un timelapse",removeTimelapse:"Supprimer le timelapse",downloadSource3mf:"Télécharger Source 3MF",uploadSource3mf:"Téléverser Source 3MF",replaceSource3mf:"Remplacer Source 3MF",removeSource3mf:"Retirer Source 3MF",uploadF3d:"Téléverser F3D",replaceF3d:"Remplacer F3D",downloadF3d:"Télécharger F3D",removeF3d:"Retirer F3D",download:"Télécharger",copyDownloadLink:"Copier lien de téléchargement",qrCode:"Code QR",viewPhotos:"Voir les photos",viewPhotosCount:"Voir les photos ({{count}})",projectPage:"Page du Projet",addToFavorites:"Ajouter aux favoris",removeFromFavorites:"Retirer des favoris",edit:"Modifier",goToProject:"Aller au Projet : {{name}}",addToProject:"Ajouter au Projet",removeFromProject:"Retirer du Projet",loading:"Chargement...",noProjectsAvailable:"Aucun projet disponible",searchProjects:"Search projects…",select:"Sélectionner",deselect:"Désélectionner",delete:"Supprimer"},permission:{noReprint:"Pas d'autorisation de réimpression",noAddToQueue:"Pas d'autorisation pour la file",noUpdateArchives:"Pas d'autorisation de mise à jour",noUploadFiles:"Pas d'autorisation de téléversement",noDownload:"Pas d'autorisation de téléchargement",noCopyLink:"Pas d'autorisation de copie lien",noDelete:"Pas d'autorisation de suppression",noCreate:"Pas d'autorisation de création"},platePicker:{title:"Choisir une plaque à prévisualiser",hint:"Cette archive contient plusieurs plaques. Sélectionnez-en une pour l'ouvrir dans la visionneuse GCode.",plateLabel:"Plaque {{index}}",objectCount:"{{count}} objet",objectCount_plural:"{{count}} objets",noGcode:"Cette archive ne contient pas de G-code généré à prévisualiser. Ouvrez-la d'abord dans Bambu Studio pour la trancher."},card:{previousPlate:"Plateau précédent",nextPlate:"Plateau suivant",plateNumber:"Plateau {{index}}",moreOptions:"Clic droit pour plus d'options",addToFavorites:"Ajouter aux favoris",removeFromFavorites:"Retirer des favoris",cancelled:"annulé",failed:"échoué",duplicate:"doublon",duplicateTitle:"Ce modèle a déjà été imprimé",openSource3mf:"Ouvrir 3MF dans Bambu Studio (clic droit pour plus)",downloadF3d:"Télécharger fichier Fusion 360",viewTimelapse:"Voir timelapse",viewPhoto:"Voir 1 photo",viewPhotos:"Voir {{count}} photos",openFolder:"Ouvrir le dossier : {{name}}",slicedFile:"Fichier découpé - prêt",sourceFile:"Fichier source uniquement - pas de mapping AMS",gcode:"GCODE",source:"SOURCE",project:"Projet : {{name}}",estimated:"Estimé : {{time}}",actual:"Réel : {{time}}",accuracy:"Précision : {{percent}}%",filament:"{{weight}}g",layer:"{{count}} couche",layers:"{{count}} couches",object:"{{count}} objet",objects:"{{count}} objets",slicedFor:"Découpé pour {{model}}",uploadedBy:"Téléversé par",noPermissionReprint:"Pas d'autorisation de réimpression",noFileForReprint:"Aucun fichier 3MF disponible — le fichier n'a pas pu être téléchargé depuis l'imprimante lors de l'enregistrement",noPermissionEdit:"Pas d'autorisation de modification",noPermissionDelete:"Pas d'autorisation de suppression",reprint:"Réimprimer",schedulePrint:"Planifier",schedule:"Planifier",openInBambuStudio:"Ouvrir dans le Slicer",openInBambuStudioToSlice:"Ouvrir dans le Slicer pour découper",slice:"Découper",externalLink:"Lien externe",makerWorld:"MakerWorld : {{designer}}",viewProject:"Voir projet",noExternalLink:"Aucun lien externe",preview3d:"Aperçu 3D",download:"Télécharger",edit:"Modifier",delete:"Supprimer"},modal:{deleteArchive:"Supprimer l'archive",deleteConfirm:'Supprimer "{{name}}" ? Cette action est irréversible.',deleteButton:"Supprimer",removeSource3mf:"Retirer Source 3MF",removeSource3mfConfirm:'Retirer le fichier 3MF de "{{name}}" ?',removeButton:"Retirer",removeF3d:"Retirer F3D",removeF3dConfirm:'Retirer le fichier Fusion 360 de "{{name}}" ?',removeTimelapse:"Supprimer le timelapse",removeTimelapseConfirm:'Êtes-vous sûr de vouloir supprimer la vidéo timelapse de "{{name}}" ?',timelapse:"{{name}} - Timelapse",selectTimelapse:"Choisir un Timelapse",selectTimelapseDesc:"Sélectionnez manuellement le timelapse :",deleteArchives:"Supprimer les archives",deleteArchivesConfirm:"Supprimer {{count}} archive(s) ?",deleteCount:"Supprimer {{count}}"},page:{title:"Archives",printsCount:"{{filtered}} sur {{total}} impressions",dropFilesHere:"Déposez les fichiers .3mf ici",releaseToUpload:"Relâcher pour téléverser",only3mfSupported:"Seuls les fichiers .3mf sont supportés",close:"Fermer",selected:"{{count}} sélectionnés",selectAll:"Tout sélectionner",tags:"Tags",project:"Projet",favorite:"Favori",delete:"Supprimer",toggledFavorites:"Favoris mis à jour pour {{count}} archive(s)",failedUpdateFavorites:"Échec mise à jour favoris",archivesDeleted:"{{count}} archive(s) supprimée(s)",failedDeleteArchives:"Échec suppression",photoDeleted:"Photo supprimée",failedDeletePhoto:"Échec suppression photo"},list:{name:"Nom",printer:"Imprimante",date:"Date",size:"Taille",actions:"Actions",hasTimelapse:"A un timelapse"},log:{date:"Date",printName:"Nom de l'impression",printer:"Imprimante",user:"Utilisateur",status:"Statut",duration:"Durée",filament:"Filament",allPrinters:"Toutes les imprimantes",allUsers:"Tous les utilisateurs",allStatuses:"Tous les statuts",cancelled:"Annulé",skipped:"Ignoré",dateFrom:"Du",dateTo:"Au",noEntries:"Aucune entrée de journal trouvée",showing:"{{count}} sur {{total}} entrées",rowsPerPage:"Lignes",page:"Page",prev:"Préc.",next:"Suiv.",clearLog:"Effacer le journal",clearLogTitle:"Effacer le journal d'impression",clearLogConfirm:"Toutes les entrées du journal d'impression seront supprimées définitivement. Les archives et les éléments de file d'attente ne sont pas affectés. Cette action est irréversible. Êtes-vous sûr ?",clearLogButton:"Tout effacer",cleared:"{{count}} entrées de journal effacées",clearFailed:"Échec de l'effacement du journal d'impression"}},queue:{title:"File d'attente",subtitle:"Gérez vos travaux d'impression",addToQueue:"Ajouter à la file",print:"Imprimer",reprint:"Réimprimer",schedulePrint:"Planifier",editQueueItem:"Modifier l'élément",printToPrinters:"Imprimer sur {{count}} imprimantes",queueToPrinters:"Ajouter à la file pour {{count}} imprimantes",queueSelectedPlates:"Ajouter {{count}} plaques à la file",selectAllPlates:"Sélectionner les {{count}} plaques",deselectAll:"Tout désélectionner",printQueued:"Impression ajoutée à la file",itemsQueued:"{{count}} éléments ajoutés à la file",sending:"Envoi...",sendingProgress:"Envoi {{current}}/{{total}}...",adding:"Ajout...",addingProgress:"Ajout {{current}}/{{total}}...",savingProgress:"Enregistrement {{current}}/{{total}}...",clearQueue:"Vider la file",clearHistory:"Effacer l'historique",emptyQueue:"La file est vide",position:"Position",scheduledTime:"Heure prévue",moveUp:"Monter",moveDown:"Descendre",startNow:"Démarrer maintenant",printingInProgress:"Impression en cours...",viewArchive:"Voir l'archive",viewInFileManager:"Voir dans le gestionnaire",itemCount:"{{count}} élément",itemCount_plural:"{{count}} éléments",dragToReorder:"Glisser pour réordonner (ASAP uniquement)",reorderHint:"La position n'affecte que les éléments ASAP.",sjf:{label:"SJF",tooltip:"Travail le plus court en premier — le planificateur priorise les impressions plus courtes"},addedBy:"Ajouté par {{name}}",nextInQueue:"Prochain en file",clearPlateSuccess:"Plateau vidé — prêt pour l'impression suivante",plateNumber:"Plateau {{index}}",quantity:"Quantité",quantityHint:"Crée {{count}} éléments de file d'attente",activeBatches:"Lots actifs",batchProgress:"{{completed}} sur {{total}} terminés",cancelBatch:"Annuler les restants",batchCancelled:"Éléments restants du lot annulés",cancelBatchConfirmTitle:"Annuler le lot",cancelBatchConfirmMessage:"Annuler tous les éléments en attente restants dans ce lot ?",batch:"Lot",sections:{currentlyPrinting:"En cours",queued:"En attente",history:"Historique"},status:{pending:"En attente",waiting:"En attente",printing:"Impression",paused:"En pause",completed:"Terminé",failed:"Échoué",skipped:"Sauté",cancelled:"Annulé"},summary:{printing:"Impressions",queued:"En attente",totalTime:"Temps total estimé",totalWeight:"Poids total estimé",history:"Historique"},filter:{allPrinters:"Toutes les imprimantes",unassigned:"Non assigné",allStatus:"Tous les statuts",allLocations:"Tous les emplacements",any:"Tout"},sort:{byPosition:"Par position",byName:"Par nom",byPrinter:"Par imprimante",bySchedule:"Par planification",byDate:"Par date",ascendingOldest:"Croissant (plus vieux)",descendingNewest:"Décroissant (plus récent)"},badges:{staged:"Préparé",requiresPrevious:"Nécessite succès précédent",autoPowerOff:"Extinction auto",gcodeInjection:"G-code"},empty:{title:"Aucune impression prévue",description:"Planifiez depuis les Archives ou glissez des fichiers ici."},time:{asap:"Dès que possible",overdue:"En retard",now:"Maintenant",lessThanMinute:"Dans moins d'une minute",inMinutes:"Dans {{count}} min",inHours:"Dans {{count}} heures"},actions:{stopPrint:"Arrêter",startPrint:"Démarrer",requeue:"Remettre en file"},bulkEdit:{title:"Modifier {{count}} élément",title_plural:"Modifier {{count}} éléments",description:"Seuls les changements seront appliqués.",printer:"Imprimante",noChange:"— Aucun changement —",queueOptions:"Options de file",staged:"Préparé (manuel)",autoPowerOff:"Extinction auto après",requirePrevious:"Requiert succès précédent",printOptions:"Options d'impression",bedLevelling:"Nivellement plateau",flowCalibration:"Calibration débit",vibrationCalibration:"Vibration (Input Shaper)",layerInspection:"Inspection 1ère couche",timelapse:"Timelapse",useAms:"Utiliser AMS",applyChanges:"Appliquer",selectAll:"Tout sélectionner",deselectAll:"Tout désélectionner",selected:"{{count}} sélectionnés",editSelected:"Modifier la sélection",cancelSelected:"Annuler la sélection"},confirm:{cancelTitle:"Annuler l'impression prévue",cancelMessage:'Annuler "{{name}}" ?',stopTitle:"Arrêter l'impression",stopMessage:`Arrêter "{{name}}" sur l'imprimante ?`,removeTitle:"Retirer de l'historique",removeMessage:`Retirer "{{name}}" de l'historique ?`,clearHistoryTitle:"Effacer l'historique",clearHistoryMessage:"Retirer les {{count}} éléments ?",cancelButton:"Annuler l'impression",stopButton:"Arrêter l'impression",thisPrint:"cette impression",thisItem:"cet élément"},toast:{cancelled:"Élément annulé",cancelFailed:"Échec annulation",removed:"Élément retiré",removeFailed:"Échec retrait",stopped:"Impression arrêtée",stopFailed:"Échec arrêt",released:"Libéré dans la file",startFailed:"Échec démarrage",reorderFailed:"Échec réorganisation",historyCleared:"{{count}} éléments effacés",clearHistoryFailed:"Échec effacement",updateFailed:"Échec mise à jour",bulkCancelled:"{{count}} éléments annulés",bulkCancelFailed:"Échec annulation"},timeline:{listView:"Liste",timelineView:"Chronologie",unassigned:"Non attribué",noData:"Aucune impression planifiée pour ce jour",allDoneBy:"Toutes les impressions terminées vers {{time}}",staged:"En attente",filterAll:"Tout afficher",filterPrinting:"En cours",filterQueued:"En file",time:{anyMoment:"imminent",minutesLeft:"{{minutes}}m restantes",hoursLeft:"{{hours}}h restantes",hoursMinutesLeft:"{{hours}}h {{minutes}}m restantes"},day:{previous:"Jour précédent",next:"Jour suivant",today:"Aujourd'hui"}},permissions:{noStopPrint:"Pas d'autorisation d'arrêt",noStartPrint:"Pas d'autorisation de démarrage",noEdit:"Pas d'autorisation de modification",noCancel:"Pas d'autorisation d'annulation",noRequeue:"Pas d'autorisation de remise en file",noRemove:"Pas d'autorisation de retrait",noClearHistory:"Pas d'autorisation historique",noEditItems:"Pas d'autorisation modification groupée",noCancelItems:"Pas d'autorisation annulation groupée"}},backgroundDispatch:{unknownFile:"Unknown file",unknownPrinter:"Unknown printer",startingPrints:"Starting prints",progressSummary:"{{complete}}/{{total}} complete • Dispatched: {{dispatched}} • Processing: {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Dismiss dispatch toast",cancelDispatchJob:"Cancel dispatch job",cancel:"Cancel",cancelling:"Cancelling…",awaitingPrinter:"En attente de l'imprimante…",status:{dispatched:"Dispatched",processing:"Processing",completed:"Completed",failed:"Failed",cancelled:"Cancelled"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Dispatch cancelled",cancelFailed:"Failed to cancel dispatch",completeWithFailures:"Background dispatch complete: {{completed}} succeeded, {{failed}} failed",completeSuccess:"Background dispatch complete: {{completed}} succeeded",printStartedRemaining:"{{completed}} impression(s) lancée(s), {{remaining}} en cours d'envoi..."}},stats:{title:"Tableau de bord",subtitle:"Glissez les widgets pour réorganiser. Cliquez sur l'œil pour masquer.",overview:"Vue d'ensemble",totalPrints:"Total impressions",successRate:"Taux de succès",totalPrintTime:"Temps total d'impression",printTime:"Temps d'impression",totalFilament:"Total filament utilisé",filamentUsed:"Filament utilisé",filamentCost:"Coût filament",totalCost:"Coût total",energyUsed:"Énergie consommée",energyCost:"Coût énergie",energyWarmingUpTooltip:"Le suivi énergétique collecte encore des instantanés horaires. Les totaux par période deviendront précis dès qu’un instantané existera avant la plage sélectionnée. Les premières valeurs peuvent être sous-estimées.",averagePrintTime:"Temps moyen par impression",printsPerDay:"Impressions par jour",byPrinter:"Par imprimante",printsByPrinter:"Impressions par imprimante",byMaterial:"Par matériau",byMonth:"Par mois",last7Days:"7 derniers jours",last30Days:"30 derniers jours",last90Days:"90 derniers jours",allTime:"Tout le temps",quickStats:"Stats rapides",printActivity:"Activité d'impression",filamentTypes:"Types de filament",filamentTrends:"Tendances filament",failureAnalysis:"Analyse des échecs",timeAccuracy:"Précision du temps",successful:"Succès :",failed:"Échecs :",perfectEstimate:"100% = estimation parfaite",noTimeAccuracyData:"Pas encore de données de précision",noFilamentData:"Aucune donnée de filament",noPrinterData:"Aucune donnée d'imprimante",noPrintData:"Aucune donnée d'impression",noPrintDataLast30Days:"Aucune impression ces 30 derniers jours",failureReasons:"Raisons des échecs",topFailureReasons:"Top raisons d'échec",failedPrintsCount:"{{failed}} / {{total}} impressions ont échoué",lastWeekRate:"Semaine dernière : {{rate}}%",resetLayout:"Réinitialiser la mise en page",recalculateCosts:"Recalculer les coûts",recalculateCostsHint:"Recalcule les coûts avec les prix actuels des filaments",exportStats:"Exporter les stats",exportAsCsv:"Exporter en CSV",exportAsExcel:"Exporter en Excel",hiddenCount:"{{count}} Masqués",exportDownloaded:"Export téléchargé",exportFailed:"Échec export",layoutReset:"Mise en page réinitialisée",recalculatedCosts:"Coûts recalculés pour {{count}} archives",recalculateFailed:"Échec du calcul",loadingStats:"Chargement des statistiques...",noPermissionResetLayout:"Pas d'autorisation de réinitialisation",noPermissionRecalculate:"Pas d'autorisation de recalcul",noPrintDataInRange:"Aucune donnée dans la période sélectionnée",periodFilament:"Filament utilisé",periodCost:"Coût",avgPerPrint:"Moy. par impression",usageOverTime:"Utilisation dans le temps",filamentByWeight:"Poids",printDuration:"Durée d'impression",printerUtilization:"Utilisation imprimante",filamentSuccess:"Succès par matériau",printHabits:"Habitudes d'impression",printTimeOfDay:"Heure d'impression",colorDistribution:"Distribution des couleurs",noColorData:"Aucune donnée de couleur disponible",records:"Records",longestPrint:"Plus longue impression",heaviestPrint:"Plus lourde impression",mostExpensivePrint:"Plus chère",busiestDay:"Jour le plus actif",successStreak:"Série de succès",streakPrint:"impression consécutive",streakPrints:"{{count}} impressions consécutives",printerStats:"Stats imprimante",hours:"heures",avgPrints:"Moy. impressions",noArchiveData:"Aucune donnée d'impression disponible",filamentByTime:"Temps",avgWeight:"Moy. poids",avgTime:"Moy. temps",filamentByPrints:"Impressions",timeframe:{today:"Aujourd'hui","this-week":"Cette semaine","this-month":"Ce mois","last-7":"7 derniers jours","last-30":"30 derniers jours","last-90":"90 derniers jours","this-year":"Cette année","all-time":"Tout",custom:"Personnalisé",from:"Du",to:"Au"},allUsers:"Tous les utilisateurs",noUser:"Aucun utilisateur (Système)",filterByUser:"Filtrer par utilisateur"},maintenance:{title:"Maintenance",overview:"Vue d'ensemble",allOk:"Toute la maintenance est à jour",dueCount:"{{count}} tâche à faire",dueCount_plural:"{{count}} tâches à faire",warningCount:"{{count}} avertissement",warningCount_plural:"{{count}} avertissements",totalPrintTime:"Temps d'impression total",nextMaintenance:"Prochaine maintenance",nothingDue:"Rien de prévu",tasks:"Tâches",lastPerformed:"Dernière réalisation",interval:"Intervalle",hoursRemaining:"{{hours}}h restantes",hoursOverdue:"{{hours}}h de retard",markDone:"Marquer comme fait",performMaintenance:"Effectuer la maintenance",history:"Historique",noHistory:"Aucun historique",editPrintHours:"Modifier les heures d'impression",currentHours:"Heures actuelles",statusTab:"Statut",settingsTab:"Paramètres",overdueCount:"{{count}} en retard",dueSoonCount:"{{count}} bientôt",dueSoon:"Bientôt",allGood:"Tout va bien",overdueBy:"Retard de {{duration}}",dueIn:"Dans {{duration}}",timeLeft:"{{duration}} restant",day:"1 jour",days:"{{count}} jours",week:"1 semaine",weeks:"{{count}} semaines",month:"1 mois",months:"{{count}} mois",year:"1 an",maintenanceTypes:"Types de maintenance",maintenanceTypesDescription:"Types système et tâches personnalisées",addCustomType:"Ajouter un type",restoreDefaults:"Restaurer les tâches par défaut",intervalType:"Type d'intervalle",intervalValue:"Intervalle ({{type}})",icon:"Icône",documentationLink:"Lien documentation (optionnel)",assignToPrinters:"Assigner aux imprimantes",selectAtLeastOnePrinter:"Sélectionnez au moins une imprimante",addType:"Ajouter le type",custom:"Personnalisé",printHours:"Heures d'impression",calendarDays:"Jours calendaires",exampleName:"ex: Remplacement filtre HEPA",viewDocumentation:"Voir documentation",timeBasedInterval:"Intervalle temporel",intervalOverrides:"Exceptions d'intervalle",intervalOverridesDescription:"Intervalles spécifiques par imprimante",assignedToPrinters:"Assigné aux imprimantes :",noPrintersAssigned:"Aucune imprimante assignée",addPrinterShort:"Ajouter :",printersAssignedClick:"{{count}} imprimante(s) assignée(s) - gérer",removeFromPrinter:"Retirer de cette imprimante",types:{lubricateCarbonRods:"Lubrifier les tiges carbone",lubricateRails:"Lubrifier les rails linéaires",cleanNozzle:"Nettoyer la buse / hotend",checkBelts:"Vérifier la tension des courroies",cleanBuildPlate:"Nettoyer le plateau",checkExtruder:"Vérifier les engrenages de l'extrudeur",checkCooling:"Vérifier les ventilateurs",generalInspection:"Inspection générale",cleanCarbonRods:"Nettoyer les tiges carbone",lubricateSteelRods:"Lubrifier les tiges en acier",cleanSteelRods:"Nettoyer les tiges en acier",cleanLinearRails:"Nettoyer les rails linéaires",checkPtfeTube:"Vérifier le tube PTFE",replaceHepaFilter:"Remplacer le filtre HEPA",replaceCarbonFilter:"Remplacer le filtre charbon",lubricateLeftNozzleRail:"Lubrifier le rail de buse gauche"},maintenanceComplete:"Maintenance marquée comme faite",typeUpdated:"Type mis à jour",typeDeleted:"Type supprimé",defaultsRestored:"{{count}} tâche(s) par défaut restaurée(s)",printHoursUpdated:"Heures mises à jour",printerAssigned:"Imprimante assignée",printerRemoved:"Imprimante retirée",deleteTypeConfirm:'Supprimer "{{name}}" ?',deleteSystemTypeTitle:"Supprimer la tâche de maintenance par défaut ?",deleteSystemTypeMessage:'Êtes-vous sûr de vouloir supprimer la tâche de maintenance par défaut "{{name}}" ?',noPermissionUpdate:"Pas d'autorisation de mise à jour",noPermissionPerform:"Pas d'autorisation d'action",noPermissionEditTypes:"Pas d'autorisation de modification types",noPermissionDeleteTypes:"Pas d'autorisation de suppression types",noPermissionEditHours:"Pas d'autorisation de modification heures",noPermissionRemovePrinter:"Pas d'autorisation retrait imprimante",noPermissionAssignPrinter:"Pas d'autorisation assignation",noPermissionEditIntervals:"Pas d'autorisation modification intervalles",configureSettings:"Configurer types et intervalles"},settings:{title:"Paramètres",general:"Général",tabs:{general:"Général",smartPlugs:"Prises connectées",notifications:"Notifications",queue:"Workflow",filament:"Filament",network:"Réseau",apiKeys:"Clés API",virtualPrinter:"Imprimante virtuelle",failureDetection:"Détection d'échec",users:"Authentification",backup:"Sauvegarde",emailAuth:"Authentification Email",ldap:"LDAP",twoFa:"Authentification 2FA",oidc:"SSO / OIDC",spoolbuddy:"SpoolBuddy"},ldap:{title:"Authentification LDAP",enabledDesc:"L'authentification LDAP est activée",disabledDesc:"L'authentification LDAP est désactivée",disabledHint:"Configurez et enregistrez les paramètres LDAP ci-dessous, puis activez.",enabled:"Authentification LDAP activée",disabled:"Authentification LDAP désactivée",feature1:"Les utilisateurs peuvent se connecter avec leurs identifiants LDAP",feature2:"Le compte administrateur local reste disponible en secours",feature3:"Les groupes LDAP sont associés aux groupes BamBuddy à la connexion",serverConfig:"Configuration du serveur LDAP",serverUrl:"URL du serveur",serverUrlHint:"Utilisez ldap:// pour standard ou ldaps:// pour les connexions SSL",security:"Sécurité",securityHint:"StartTLS met à niveau une connexion simple vers TLS. LDAPS utilise TLS dès le début.",bindDn:"DN de liaison (compte de service)",bindPassword:"Mot de passe de liaison",searchBase:"DN de base de recherche",userFilter:"Filtre de recherche utilisateur",userFilterHint:"{username} est remplacé par le nom d'utilisateur. Utilisez (uid={username}) pour OpenLDAP.",autoProvision:"Provisionnement automatique",autoProvisionHint:"Créer automatiquement un compte BamBuddy lors de la première connexion LDAP",defaultGroup:"Groupe par défaut",defaultGroupNone:"— Aucun (pas de repli) —",defaultGroupHint:"Groupe de repli attribué lorsqu'un utilisateur LDAP s'authentifie mais n'est dans aucun groupe LDAP mappé. Laissez vide pour laisser les utilisateurs non mappés sans autorisations.",groupMapping:"Mappage de groupes (JSON)",groupMappingHint:"Associer les DN de groupes LDAP aux groupes BamBuddy. Groupes disponibles : ",testConnection:"Tester la connexion",settingsSaved:"Paramètres LDAP enregistrés",errors:{serverRequired:"L'URL du serveur LDAP est requise",searchBaseRequired:"Le DN de base de recherche est requis",enableAuthFirst:"Activez d'abord l'authentification",configureLdapFirst:"Enregistrez d'abord les paramètres LDAP"}},email:{smtpSettings:"Configuration SMTP",smtpHost:"Serveur SMTP",smtpPort:"Port SMTP",security:"Sécurité",authentication:"Authentification",username:"Utilisateur",password:"Mot de passe",fromEmail:"Email expéditeur",fromName:"Nom expéditeur",testConnection:"Tester la connexion SMTP",testRecipient:"Email test destinataire",sendTest:"Envoyer email test",sending:"Envoi...",save:"Enregistrer les paramètres",saving:"Enregistrement...",advancedAuth:"Authentification avancée",advancedAuthEnabled:"L'authentification avancée est activée",advancedAuthEnabledDesc:"La gestion des utilisateurs par email est active. Les nouveaux utilisateurs recevront un mot de passe auto-généré.",advancedAuthDisabled:"Authentification avancée désactivée",advancedAuthDisabledDesc:"Activez pour les fonctionnalités liées à l'email (mot de passe oublié, etc).",enable:"Activer",disable:"Désactiver",feature1:"Génération auto et envoi de mots de passe par email",feature2:"Connexion par utilisateur ou email",feature3:"Réinitialisation mot de passe oublié disponible",feature4:"Réinitialisation admin par email",errors:{requiredFields:"Remplissez tous les champs requis",usernameRequired:"L'utilisateur est requis pour l'authentification",enterTestEmail:"Entrez une adresse email de test",smtpServerAndEmail:"Serveur et expéditeur requis pour le test",usernamePasswordRequired:"Utilisateur et mot de passe requis pour l'auth",configureSmtpFirst:"Configurez et testez le SMTP d'abord",enableAuthFirst:"Veuillez d'abord activer l'authentification pour utiliser les fonctionnalités basées sur le courrier électronique."},success:{settingsSaved:"Paramètres SMTP enregistrés"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"Aucun (Port 25)"},authOptions:{enabled:"Activée",disabled:"Désactivée"}},appearance:"Apparence",notifications:"Notifications",smartPlugs:"Prises connectées",spoolman:"Spoolman",updates:"Mises à jour",language:"Langue",languageDescription:"Choisissez votre langue",theme:"Thème",themeLight:"Clair",themeDark:"Sombre",themeSystem:"Système",defaultView:"Vue par défaut",defaultViewDescription:"Page affichée au démarrage",checkForUpdates:"Vérifier les mises à jour",autoUpdate:"Mise à jour auto",currentVersion:"Version actuelle",latestVersion:"Dernière version",upToDate:"Bambuddy est à jour",updateAvailable:"Mise à jour disponible",notificationLanguage:"Langue des notifications",notificationLanguageDescription:"Langue pour les notifications push",bedCooledThreshold:"Seuil de refroidissement du plateau",bedCooledThresholdDescription:"Température en dessous de laquelle le plateau est considéré comme refroidi",userNotificationsEnabled:"Notifications utilisateur",userNotificationsEnabledDescription:"Active le menu de notifications utilisateur et les notifications par e-mail pour les événements d'impression. Nécessite l'authentification avancée.",userNotificationsDisabledHint:"Activez l'authentification avancée pour utiliser les notifications utilisateur.",notificationProviders:"Fournisseurs de notifications",addProvider:"Ajouter un fournisseur",editProvider:"Modifier le fournisseur",providerType:"Type de fournisseur",testNotification:"Tester la notification",testSuccess:"Notification de test envoyée",testFailed:"Échec de l'envoi du test",quietHours:"Heures de silence",quietHoursDescription:"Ne pas déranger pendant ces heures",quietHoursStart:"Début",quietHoursEnd:"Fin",events:{title:"Événements de notification",printStart:"Impression démarrée",printComplete:"Impression terminée",printFailed:"Impression échouée",printStopped:"Impression arrêtée",printProgress:"Jalons de progression",printProgressDescription:"Notifier à 25%, 50%, 75%",printerOffline:"Imprimante hors ligne",printerError:"Erreur imprimante",filamentLow:"Filament bas",maintenanceDue:"Maintenance due",maintenanceDueDescription:"Notifier quand une tâche est due"},smartPlug:{title:"Prises connectées",add:"Ajouter une prise",edit:"Modifier la prise",name:"Nom",ipAddress:"Adresse IP",linkedPrinter:"Imprimante liée",autoOn:"Allumage auto",autoOnDescription:"Allumer au début de l'impression",autoOff:"Extinction auto",autoOffDescription:"Éteindre après l'impression",offDelay:"Délai d'extinction",offDelayMinutes:"Minutes après fin",offDelayTemp:"Quand la buse est sous",currentState:"État actuel",turnOn:"Allumer",turnOff:"Éteindre"},filamentTracking:"Suivi de Filament",filamentTrackingDesc:"Choisissez comment suivre vos bobines. Utilisez l'inventaire intégré ou connectez un serveur Spoolman.",filamentChecks:"Vérifications du filament",disableFilamentWarnings:"Désactiver les avertissements de filament",disableFilamentWarningsDesc:"Ne pas afficher les avertissements de filament insuffisant lors de l'impression ou de la mise en file d'attente",preferLowestFilament:"Préférer le filament le plus bas",preferLowestFilamentDesc:"Lorsque plusieurs bobines correspondent, utiliser celle avec le moins de filament restant",trackingModeBuiltIn:"Inventaire Intégré",trackingModeBuiltInDesc:"Correspondance RFID et suivi de consommation inclus",trackingModeSpoolmanDesc:"Serveur de gestion externe",builtInFeatureRfid:"Détecte auto les bobines RFID Bambu Lab dans l'AMS",builtInFeatureUsage:"Suit la consommation par impression",builtInFeatureCatalog:"Gère bobines, couleurs et profils facteur K",builtInFeatureThirdParty:"Les bobines tierces peuvent être assignées aux bobines d'inventaire",amsSyncButton:"Synchroniser les poids depuis l'AMS",amsSyncTitle:"Synchroniser les poids des bobines depuis l'AMS",amsSyncMessage:"Tous les poids des bobines de l'inventaire seront écrasés par les valeurs actuelles de l'AMS des imprimantes connectées. Utilisez ceci pour récupérer des données de poids corrompues. Les imprimantes doivent être en ligne.",amsSyncing:"Synchronisation...",amsSyncSuccess:"{{synced}} bobine(s) synchronisée(s), {{skipped}} ignorée(s)",amsSyncError:"Échec de la synchronisation des poids depuis l'AMS",spoolmanUrl:"URL Spoolman",spoolmanUrlHint:"URL de votre serveur Spoolman (ex: http://localhost:7912)",spoolmanConnected:"Connecté",spoolmanDisconnected:"Déconnecté",status:"Statut",connect:"Connecter",disconnect:"Déconnecter",howSyncWorks:"Fonctionnement de la Sync",syncInfoRfidOnly:"Seules les bobines officielles RFID sont synchronisées",syncInfoAutoCreate:"Les bobines sont créées dans Spoolman à la 1ère sync",syncInfoThirdPartySkipped:"Les bobines tierces ou rechargées sont ignorées",linkingExistingSpools:"Lier des bobines existantes",linkingExistingSpoolsDesc:'Pour lier une bobine Spoolman, survolez un slot AMS et cliquez sur "Lier à Spoolman".',syncMode:"Mode de Sync",syncModeAuto:"Automatique",syncModeManual:"Manuel uniquement",syncModeAutoDesc:"Sync auto lors de changements AMS",syncModeManualDesc:"Sync uniquement sur déclenchement manuel",syncAmsData:"Synchroniser AMS",syncAmsDataDesc:"Synchroniser manuellement les données vers Spoolman",allPrinters:"Toutes les imprimantes",noDefaultPrinter:"Aucune par défaut (demander à chaque fois)",sidebarOrder:"Ordre de la barre latérale",saveThumbnails:"Enregistrer les vignettes",captureFinishPhoto:"Prendre une photo à la fin",noPrintersConfigured:"Aucune imprimante configurée",archiveMode:{always:"Toujours créer une archive",never:"Ne jamais créer d'archive",ask:"Demander à chaque fois"},checkForUpdatesLabel:"Vérifier les mises à jour",checkPrinterFirmware:"Vérifier le firmware imprimante",includeBetaUpdates:"Inclure les versions bêta",includeBetaUpdatesDesc:"Notifier des versions bêta et préliminaires lors de la vérification des mises à jour",enableRetry:"Activer la rétentative",homeAssistantDescription:"Contrôler les prises via Home Assistant",environmentManagedLabel:"(Géré par l'environnement)",autoEnabledViaEnv:"Activé via variables d'environnement",urlFromEnvReadOnly:"Valeur HA_URL (lecture seule)",tokenFromEnvReadOnly:"Valeur HA_TOKEN (lecture seule)",mqttConnectedTo:"Connecté à",prometheusDescription:"Exposer les données au format Prometheus",noSmartPlugsTitle:"Aucune prise configurée",noSmartPlugsDescription:"Ajoutez une prise Tasmota pour suivre l'énergie et automatiser.",noProvidersTitle:"Aucun fournisseur configuré",noProvidersDescription:"Ajoutez un fournisseur pour recevoir des alertes.",noTemplatesAvailable:"Aucun modèle dispo. Redémarrez pour les générer.",apiPermissionView:"Voir statut et file",apiPermissionEdit:"Gérer la file d'attente",apiKeysEmptyTitle:"Aucune clé API",apiKeysEmptyDescription:"Créez une clé pour vos intégrations.",noUsersFound:"Aucun utilisateur trouvé",noGroupsFound:"Aucun groupe trouvé",noGroupsAvailable:"Aucun groupe disponible",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",systemGroupWarning:"Les noms des groupes système sont fixes",authDisabledTitle:"Authentification désactivée",authDisabledFeature1:"Requis pour accéder au système",authDisabledFeature2:"Gestion multi-utilisateurs et groupes",authDisabledFeature3:"Plus de 50 permissions granulaires",userHasCreated:"Cet utilisateur a créé :",userItemsQuestion:"Que faire de ces éléments ?",deleteUserConfirm:"Supprimer cet utilisateur ?",actionCannotBeUndone:"Cette action est irréversible.",addFirstSmartPlug:"Ajoutez votre première prise",providers:"Fournisseurs",log:"Journal",testAll:"Tout tester",testResults:"Résultats du test",testPassedCount:"{{count}} succès",testFailedCount:"{{count}} échecs",messageTemplates:"Modèles de message",messageTemplatesDescription:"Personnalisez les messages par événement.",apiKeys:"Clés API",apiKeysDescription:"Créez des clés pour webhooks et API.",createKey:"Créer une clé",apiKeyCreated:"Clé API créée avec succès",apiKeyCopyWarning:"Copiez cette clé maintenant - elle ne sera plus affichée !",useInApiBrowser:"Utiliser dans l'explorateur API",createNewApiKey:"Nouvelle clé API",keyName:"Nom de la clé",keyNamePlaceholder:"ex: Home Assistant, OctoPrint",readStatus:"Lire le statut",readStatusDescription:"Voir les imprimantes et la file",manageQueue:"Gérer la file",manageQueueDescription:"Ajouter/retirer des éléments",controlPrinter:"Contrôler l'imprimante",controlPrinterDescription:"Pause, reprise, arrêt",unnamedKey:"Clé sans nom",lastUsed:"Dernière utilisation",read:"Lecture",control:"Contrôle",createFirstKey:"Créez votre première clé",webhookEndpoints:"Points de terminaison Webhook",webhookApiKeyHint:"Utilisez la clé dans l'en-tête X-API-Key.",webhook:{getAllStatus:"Tous les statuts",getSpecificStatus:"Statut spécifique",addToQueue:"Ajouter à la file",pausePrint:"Pause",resumePrint:"Reprise",stopPrint:"Arrêt"},apiBrowser:"Explorateur API",apiBrowserDescription:"Testez les endpoints API.",apiKeyForTesting:"Clé API pour test",apiKeyPlaceholder:"Collez votre clé pour tester...",apiKeyHint:"Sera envoyée via l'en-tête X-API-Key.",deleteApiKeyTitle:"Supprimer la clé API",deleteApiKeyMessage:"Les intégrations utilisant cette clé cesseront de fonctionner.",deleteKey:"Supprimer la clé",amsDisplayThresholds:"Seuils d'affichage AMS",amsThresholdsDescription:"Seuils de couleur pour humidité et température.",humidity:"Humidité",goodGreen:"Bon (vert)",fairOrange:"Moyen (orange)",aboveFairBad:"Au-dessus = rouge (mauvais)",fairAlsoDryingThreshold:"Ce seuil est aussi utilisé pour déclencher le séchage automatique",temperature:"Température",goodBlue:"Bon (bleu)",aboveFairHot:"Au-dessus = rouge (chaud)",historyRetention:"Rétention d'historique",keepSensorHistory:"Garder l'historique pendant",historyRetentionDescription:"Les anciennes données seront supprimées.",defaultPrintOptions:"Options d'impression par défaut",defaultPrintOptionsDescription:"Définir les valeurs par défaut des options d'impression. Modifiables dans la boîte de dialogue d'impression.",defaultBedLevelling:"Nivellement du lit",defaultBedLevellingDesc:"Niveler automatiquement le lit avant l'impression",defaultFlowCali:"Calibration du flux",defaultFlowCaliDesc:"Calibrer le flux d'extrusion",defaultVibrationCali:"Calibration des vibrations",defaultVibrationCaliDesc:"Réduire les artefacts de ringing",defaultLayerInspect:"Inspection première couche",defaultLayerInspectDesc:"Inspection IA de la première couche",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Enregistrer une vidéo timelapse",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Confirmation de plateau libre",requirePlateClear:"Exiger la confirmation de plateau libre",requirePlateClearDescription:"Lorsque cette option est activée, le planificateur attend une confirmation de plateau libre par imprimante avant de lancer les impressions en file d'attente sur les imprimantes ayant terminé. La désactiver masque également le badge d'état du plateau et le bouton « Marquer le plateau comme dégagé » sur les cartes d'imprimante.",gcodeInjection:"Injection de G-code",gcodeInjectionDescription:"Configurez du G-code personnalisé à injecter au début et/ou à la fin des impressions pour les systèmes d'auto-impression comme Farmloop, SwapMod, AutoClear et Printflow 3D. Les snippets sont configurés par modèle d'imprimante et appliqués lorsque « Injecter le G-code » est activé sur un élément de file d'attente.",gcodeInjectionNoPrinters:"Aucune imprimante trouvée. Ajoutez des imprimantes pour configurer les snippets G-code.",gcodeStartLabel:"G-code de début",gcodeEndLabel:"G-code de fin",gcodeStartPlaceholder:"G-code ajouté avant le début de l'impression...",gcodeEndPlaceholder:"G-code ajouté après la fin de l'impression...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Séchage automatique",queueDryingDescription:"Sécher automatiquement le filament AMS lorsque l'imprimante est inactive entre les impressions. Utilise le seuil d'humidité ci-dessus.",queueDryingEnabled:"Activer le séchage automatique",queueDryingEnabledDescription:"Démarrer le séchage AMS automatiquement lorsque l'imprimante est inactive et l'humidité dépasse le seuil",queueDryingBlock:"Attendre la fin du séchage",queueDryingBlockDescription:"Bloquer la file d'attente jusqu'à la fin du séchage. Désactivé, les impressions sont prioritaires.",ambientDryingEnabled:"Séchage ambiant",ambientDryingEnabledDescription:"Sécher automatiquement le filament sur les imprimantes inactives lorsque l'humidité dépasse le seuil, même sans impressions en file.",dryingPresets:"Préréglages de séchage",dryingPresetsDescription:"Température et durée par type de filament. AMS 2 Pro utilise des températures plus basses, AMS-HT supporte des températures plus élevées.",dryingFilament:"Filament",printModal:"Fenêtre d'impression",expandCustomMapping:"Étendre le mapping personnalisé par défaut",expandCustomMappingDescription:"Affiche le mapping AMS par imprimante étendu.",authentication:"Authentification",authEnabledDescription:"L'instance est sécurisée",authDisabledDescription:"Activez pour restreindre l'accès",authDisabledMessage:"Activez l'authentification pour gérer comptes et permissions.",enableAuthentication:"Activer l'authentification",currentUser:"Utilisateur actuel",changePassword:"Changer le mot de passe",admin:"Admin",users:"Utilisateurs",addUser:"Ajouter un utilisateur",groups:"Groupes",addGroup:"Ajouter un groupe",system:"Système",noDescription:"Pas de description",userCount:"{{count}} utilisateurs",permissionCount:"{{count}} permissions",createUser:"Créer un utilisateur",username:"Nom d'utilisateur",enterUsername:"Entrez l'utilisateur",password:"Mot de passe",enterPassword:"Mot de passe (min 6 char)",confirmPassword:"Confirmer le mot de passe",confirmPasswordPlaceholder:"Confirmez le mot de passe",viewReleaseOnGitHub:"Voir la version sur GitHub",turnAllPlugsOn:"Tout allumer",turnAllPlugsOff:"Tout éteindre",clearNotificationLogs:"Effacer les journaux",clearLogsMessage:"Efface définitivement les logs de plus de 30 jours.",clearLogs:"Effacer les logs",resetUiPreferences:"Réinitialiser l'UI",resetUiPreferencesMessage:"Réinitialise l'ordre, thème, widgets, etc. N'affecte pas vos données.",resetPreferences:"Réinitialiser",deleteGroupTitle:"Supprimer le groupe",deleteGroupMessage:"Les utilisateurs de ce groupe perdront ces permissions.",deleteGroup:"Supprimer le groupe",disableAuthenticationTitle:"Désactiver l'authentification",disableAuthenticationMessage:"Instance accessible sans connexion. Les comptes sont conservés.",disableAuthentication:"Désactiver",configureBambuddy:"Configurer Bambuddy",systemDefault:"Défaut système",archiveSettings:"Réglages Archives",newWindow:"Nouvelle fenêtre",embeddedOverlay:"Superposition intégrée",preferredSlicer:"Slicer préféré",preferredSlicerDescription:"Application pour ouvrir les fichiers",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"Caméras externes",costTracking:"Suivi des coûts",printsOnly:"Impressions uniquement",totalConsumption:"Consommation totale",dataManagement:"Gestion des données",storageUsage:"Utilisation du stockage",storageUsageDescription:"Répartition de l'utilisation des données par catégorie",storageUsageTotal:"Total",storageUsageErrors:"Erreurs",storageUsageOtherBreakdown:"Autre (inclut ressources statiques, scripts et fichiers de configuration)",storageUsageSystem:"Système",storageUsageData:"Données",storageUsageUnavailable:"Informations d'utilisation du stockage non disponibles",clearNotificationLogsDescription:"Supprimer logs de plus de 30 jours",resetUiPreferencesDescription:"Réinitialise thèmes et affichage sans toucher aux données.",enableHomeAssistant:"Activer Home Assistant",enableMqtt:"Activer MQTT",useTls:"Utiliser TLS",enableMetricsEndpoint:"Activer l'endpoint Metrics",availableMetrics:"Metrics disponibles",editUser:"Modifier l'utilisateur",deleteUserTitle:"Supprimer l'utilisateur",groupName:"Nom du groupe",leaveEmptyForAnonymous:"Vide pour anonyme",leaveEmptyForNoAuth:"Vide si pas d'auth",enterNewPassword:"Nouveau mot de passe",confirmNewPassword:"Confirmer nouveau mdp",enterGroupName:"Entrez le nom du groupe",enterDescriptionOptional:"Description (optionnel)",enterCurrentPassword:"Mdp actuel",enterNewPasswordMin6:"Nouveau mdp (min 6 char)",toast:{keyCopied:"Clé copiée",copyFailed:"Échec copie",keyAddedToBrowser:"Clé ajoutée à l'explorateur",clearLogsFailed:"Échec effacement logs",uiPreferencesReset:"Préférences UI réinitialisées. Rafraîchissement...",authDisabled:"Authentification désactivée",authDisableFailed:"Échec désactivation",apiKeyCreated:"Clé API créée",apiKeyDeleted:"Clé API supprimée",userCreated:"Utilisateur créé",userUpdated:"Utilisateur mis à jour",userDeleted:"Utilisateur supprimé",groupCreated:"Groupe créé",groupUpdated:"Groupe mis à jour",groupDeleted:"Groupe supprimé",fillRequiredFields:"Remplissez les champs requis",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères",enterGroupName:"Entrez un nom de groupe",settingsSaved:"Paramètres enregistrés",noPermissionUpdate:"Vous n'avez pas l'autorisation de modifier les paramètres",cameraSettingsSaved:"Réglages caméra enregistrés",enterCameraUrl:"Entrez une URL caméra",passwordChanged:"Mot de passe modifié",connectionFailed:"Échec connexion",testFailed:"Échec test",cameraConnected:"Caméra connectée {{resolution}}"},testConnection:"Tester la connexion",catalog:{spoolCatalog:"Catalogue de Bobines",spoolCatalogDescription:"Poids des bobines vides par marque/type. Utilisé pour le calcul auto du poids restant.",searchCatalog:"Chercher dans le catalogue...",addNewEntry:"Nouvelle Entrée",namePlaceholder:"Nom (ex: Bambu Lab - Plastique)",weight:"Poids",type:"Type",default:"Défaut",custom:"Perso",noMatch:"Aucune entrée correspondante",empty:"Catalogue vide",deleteEntry:"Supprimer l'entrée",deleteConfirm:'Supprimer "{{name}}" ?',resetCatalog:"Réinitialiser le catalogue",resetConfirm:"Réinitialiser aux valeurs par défaut ? Vos entrées personnalisées seront supprimées.",loadFailed:"Échec chargement catalogue",nameWeightRequired:"Nom et poids requis",entryAdded:"Entrée ajoutée",addFailed:"Échec ajout",entryUpdated:"Entrée mise à jour",updateFailed:"Échec mise à jour",entryDeleted:"Entrée supprimée",deleteFailed:"Échec suppression",resetSuccess:"Catalogue réinitialisé",resetFailed:"Échec réinitialisation",exported:"{{count}} entrées exportées",imported:"{{added}} entrées importées ({{skipped}} ignorées)",importFailed:"Échec import : format JSON invalide",exportTooltip:"Exporter en JSON",importTooltip:"Importer depuis JSON",resetTooltip:"Réinitialiser par défaut",selectedCount:"{{count}} sélectionnés",deleteSelected:"Supprimer la sélection",bulkDeleteConfirm:"Supprimer {{count}} entrées ?",bulkDeleted:"{{count}} entrées supprimées",bulkDeleteFailed:"Échec de la suppression"},colorCatalog:{title:"Catalogue de Couleurs",description:"Couleurs de filament par fabricant. Utilisé pour la recherche auto lors de l'ajout de bobines.",searchColors:"Chercher couleurs...",allManufacturers:"Tous les fabricants",addNewColor:"Nouvelle Couleur",manufacturer:"Fabricant",colorName:"Nom couleur",hex:"Hex",materialOptional:"Matériau (optionnel)",showing:"Affichage {{filtered}} sur {{total}} couleurs",noMatch:"Aucune couleur correspondante",empty:"Catalogue vide",deleteColor:"Supprimer couleur",deleteConfirm:'Supprimer "{{name}}" ?',resetCatalog:"Réinitialiser catalogue couleurs",resetConfirm:"Réinitialiser aux valeurs par défaut ?",sync:"Sync",starting:"Démarrage...",syncTooltip:"Sync depuis FilamentColors.xyz (2000+ couleurs, peut être long)",loadFailed:"Échec chargement catalogue couleurs",fieldsRequired:"Fabricant, nom et code Hex requis",colorAdded:"Couleur ajoutée",addFailed:"Échec ajout",colorUpdated:"Couleur mise à jour",updateFailed:"Échec mise à jour",colorDeleted:"Couleur supprimée",deleteFailed:"Échec suppression",resetSuccess:"Catalogue réinitialisé",resetFailed:"Échec réinitialisation",syncUpToDate:"Déjà à jour ({{count}} couleurs vérifiées)",syncComplete:"{{added}} couleurs ajoutées ({{skipped}} déjà présentes)",syncError:"Erreur de sync",syncFailed:"Échec sync FilamentColors.xyz",exported:"{{count}} couleurs exportées",imported:"{{added}} couleurs importées ({{skipped}} ignorées)",importFailed:"Échec import : format JSON invalide",selectedCount:"{{count}} sélectionnés",deleteSelected:"Supprimer la sélection",bulkDeleteConfirm:"Supprimer {{count}} couleurs ?",bulkDeleted:"{{count}} couleurs supprimées",bulkDeleteFailed:"Échec de la suppression des couleurs"},dateFormat:"Format de date",dateFormatUs:"US (MM/JJ/AAAA)",dateFormatEu:"EU (JJ/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-JJ)",timeFormat:"Format horaire",timeFormat12:"12 heures (3:30 PM)",timeFormat24:"24 heures (15:30)",defaultPrinter:"Imprimante par défaut",defaultPrinterDescription:"Présélectionner cette imprimante pour les téléversements, réimpressions et autres opérations.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Glissez les éléments dans la barre latérale pour réorganiser. Réinitialiser l'ordre par défaut ici.",setDefault:"Définir par défaut",sidebarOrderSetDefaultHint:"Définir par défaut applique l'ordre actuel du menu aux utilisateurs qui n'ont pas encore personnalisé le leur.",sidebarDefaultSet:"L'ordre du menu par défaut a été défini.",sidebarDefaultCleared:"Ordre du menu par défaut effacé.",sidebarDefaultFailed:"Échec de la définition de l'ordre du menu par défaut.",reset:"Réinitialiser",darkMode:"Mode sombre",lightMode:"Mode clair",active:"(actif)",background:"Arrière-plan",accent:"Accent",style:"Style",bgNeutral:"Neutre",bgWarm:"Chaud",bgCool:"Froid",bgOled:"OLED Noir",bgSlate:"Bleu ardoise",bgForest:"Vert forêt",accentGreen:"Vert",accentTeal:"Sarcelle",accentBlue:"Bleu",accentOrange:"Orange",accentPurple:"Violet",accentRed:"Rouge",styleClassic:"Classique",styleGlow:"Lumineux",styleVibrant:"Vibrant",themeToggleHint:"Basculer entre le mode sombre et clair avec l'icône soleil/lune dans la barre latérale.",autoArchivePrints:"Archiver automatiquement les impressions",autoArchiveDescription:"Sauvegarder automatiquement les fichiers 3MF à la fin des impressions",saveThumbnailsDescription:"Extraire et sauvegarder les images d'aperçu des fichiers 3MF",captureFinishPhotoDescription:"Prendre une photo avec la caméra de l'imprimante à la fin de l'impression",ffmpegNotInstalled:"ffmpeg non installé",ffmpegRequired:"La capture caméra nécessite ffmpeg. Installez-le via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).",camera:"Caméra",cameraViewMode:"Mode d'affichage caméra",cameraOverlayDescription:"La caméra s'ouvre dans un overlay redimensionnable sur l'écran principal",cameraWindowDescription:"La caméra s'ouvre dans une fenêtre de navigateur séparée",externalCamerasDescription:"Configurer des caméras externes pour remplacer la caméra intégrée. Supporte les flux MJPEG, RTSP, snapshots HTTP et caméras USB (V4L2). Lorsqu'activée, la caméra externe est utilisée pour la vue en direct et les photos de fin.",cameraPlaceholderUsb:"Chemin du périphérique (/dev/video0)",cameraPlaceholderUrl:"URL caméra (rtsp://... ou http://...)",cameraTypeMjpeg:"Flux MJPEG",cameraTypeRtsp:"Flux RTSP",cameraTypeSnapshot:"Snapshot HTTP",cameraTypeUsb:"Caméra USB (V4L2)",cameraRotation:"Rotation",test:"Tester",connected:"Connecté",disconnected:"Déconnecté",currency:"Devise",defaultFilamentCost:"Coût filament par défaut (par kg)",electricityCost:"Coût électricité par kWh",energyDisplayMode:"Mode d'affichage énergie",energyModePrintDescription:"Le tableau de bord affiche la somme de l'énergie utilisée pendant les impressions",energyModeTotalDescription:"Le tableau de bord affiche l'énergie totale des prises connectées",fileManager:"Gestionnaire de fichiers",createArchiveEntry:"Créer une entrée d'archive lors de l'impression",createArchiveEntryDescription:"Lors de l'impression depuis le gestionnaire de fichiers, créer optionnellement une entrée d'archive",lowDiskSpaceWarning:"Avertissement espace disque faible",lowDiskSpaceDescription:"Afficher un avertissement lorsque l'espace disque libre descend sous ce seuil",printerFirmware:"Firmware imprimante",checkFirmwareDescription:"Vérifier les mises à jour firmware de Bambu Lab",bambuddySoftware:"Logiciel Bambuddy",autoCheckDescription:"Vérifier automatiquement les nouvelles versions au démarrage",checkNow:"Vérifier maintenant",updateAvailableVersion:"Mise à jour disponible : v{{version}}",releaseNotes:"Notes de version",updateViaDocker:"Mettre à jour via Docker Compose :",installUpdate:"Installer la mise à jour",latestVersionRunning:"Vous utilisez la dernière version",failedToCheckUpdates:"Échec de la vérification des mises à jour : {{error}}",backupRestore:"Sauvegarde & Restauration",backupRestoreDescription:"Exporter/importer les paramètres et configurer la sauvegarde GitHub",goToBackup:"Aller à la sauvegarde",externalUrl:"URL externe",externalUrlDescription:"L'URL externe où Bambuddy est accessible. Utilisée pour les images de notification et les intégrations externes.",bambuddyUrl:"URL Bambuddy",externalUrlHint:"Inclure le protocole et le port (ex : http://192.168.1.100:8000)",ftpRetry:"Réessai FTP",ftpRetryDescription:"Réessayer les opérations FTP lorsque le WiFi de l'imprimante est instable. S'applique aux téléchargements 3MF, uploads d'impression, téléchargements timelapse et mises à jour firmware.",autoRetryDescription:"Réessayer automatiquement les opérations FTP échouées",retryAttempts:"Tentatives de réessai",retryDelay:"Délai de réessai",connectionTimeout:"Délai de connexion",time_one:"{{count}} fois",time_other:"{{count}} fois",second_one:"{{count}} seconde",second_other:"{{count}} secondes",nSeconds:"{{count}} secondes",increaseForWeakWifi:"Augmenter pour les imprimantes avec un WiFi faible",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Se connecter à Home Assistant pour contrôler les prises connectées via l'API REST HA. Supporte les entités switch, light, input_boolean et script.",homeAssistantUrl:"URL Home Assistant",longLivedAccessToken:"Token d'accès longue durée",haTokenHint:"Créer un token dans HA : Profil → Tokens d'accès longue durée → Créer un token",connectionSuccessful:"Connexion réussie",connectionFailed:"Connexion échouée",haConnectionSuccess:"Connexion à Home Assistant réussie.",haConnectionFailed:"Échec de la connexion à Home Assistant.",mqttPublishing:"Publication MQTT",mqttDescription:"Publier les événements BamBuddy vers un broker MQTT externe pour l'intégration avec Node-RED, Home Assistant et d'autres systèmes d'automatisation.",mqttEnableDescription:"Publier les événements vers un broker MQTT externe",brokerHostname:"Nom d'hôte du broker",port:"Port",usernameOptional:"Nom d'utilisateur (optionnel)",passwordOptional:"Mot de passe (optionnel)",topicPrefix:"Préfixe de topic",topicPrefixHint:"Les topics seront : {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Métriques Prometheus",prometheusEndpointDescription:"Exposer les métriques imprimante sur <code>/api/v1/metrics</code> pour la surveillance Prometheus/Grafana.",bearerTokenOptional:"Token Bearer (optionnel)",bearerTokenHint:"Si défini, les requêtes doivent inclure <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"État de connexion",metricsPrinterState:"État imprimante (idle/printing/etc)",metricsPrintProgress:"Progression impression 0-100%",metricsBedTemp:"Température du plateau",metricsNozzleTemp:"Température de la buse",metricsPrintsTotal:"Total impressions par résultat",metricsMore:"...et plus (couches, ventilateurs, file d'attente, utilisation filament)",smartPlugsDescription:"Connecter des prises connectées (Tasmota ou Home Assistant) pour automatiser le contrôle de l'alimentation et suivre la consommation d'énergie de vos imprimantes.",allOn:"Tout allumer",allOff:"Tout éteindre",addSmartPlug:"Ajouter une prise",energySummary:"Résumé énergétique",currentPower:"Puissance actuelle",plugsOnline:"{{reachable}}/{{total}} prises en ligne",today:"Aujourd'hui",yesterday:"Hier",total:"Total",enablePlugsForSummary:"Activer les prises pour voir le résumé énergétique",addNotificationProvider:"Ajouter",systemBadge:"(Système)",creating:"Création...",changing:"Modification...",deleteUserAndItems:"Supprimer l'utilisateur ET ses éléments",deleteUserKeepItems:"Supprimer l'utilisateur, garder les éléments (deviennent sans propriétaire)",ok:"OK",twoFa:{totpTitle:"Application Authenticator (TOTP)",totpDesc:"Utilisez une application comme Google Authenticator, Aegis ou Authy.",emailOtpTitle:"OTP par e-mail",emailOtpDesc:"Envoyez un code à usage unique à {{email}} lors de la connexion.",emailOtpNoEmail:"Ajoutez une adresse e-mail à votre compte pour activer cette méthode.",addEmailFirst:"Votre compte n'a pas d'adresse e-mail. Demandez à un administrateur d'en ajouter une.",setupTotp:"Configurer l'application Authenticator",setupAuthApp:"Configurer l'application Authenticator",setupInstructions:"Scannez le QR code avec votre application authenticator, puis confirmez avec un code.",manualEntry:"Impossible de scanner ? Entrez ce secret manuellement :",scannedContinue:"Code scanné — continuer",enterCodeToConfirm:"Entrez le code à 6 chiffres de votre application authenticator pour confirmer.",activate:"Activer",disableTotp:"Désactiver l'Authenticator",disableConfirmHint:"Entrez un code TOTP valide ou un code de secours pour désactiver l'authenticator.",totpDisabled:"Application Authenticator désactivée.",emailOtpEnabled:"OTP par e-mail activé.",emailOtpDisabled:"OTP par e-mail désactivé.",smtpRequired:"Veuillez d'abord configurer et tester les paramètres SMTP.",invalidCode:"Code invalide. Veuillez réessayer.",enableEmailOtp:"Activer OTP par e-mail",disableEmailOtp:"Désactiver OTP par e-mail",emailSetupEnterCode:"Un code de vérification a été envoyé à votre adresse e-mail. Entrez-le ci-dessous pour confirmer que vous possédez cette boîte de réception.",verifyAndEnable:"Vérifier et activer",emailDisablePasswordHint:"Entrez le mot de passe de votre compte pour confirmer la désactivation de l'OTP par e-mail.",passwordPlaceholder:"Entrez votre mot de passe",backupCodesTitle:"Sauvegardez vos codes de secours",backupCodesWarning:"Conservez ces codes en lieu sûr. Chaque code ne peut être utilisé qu'une seule fois et ne sera plus affiché.",backupCodesRemaining:"{{count}} codes de secours restants",savedCodes:"Codes sauvegardés",regenBackup:"Régénérer les codes de secours",regenBackupHint:"Entrez votre code TOTP actuel pour générer 10 nouveaux codes de secours. Tous les codes existants seront invalidés.",newBackupCodes:"Nouveaux codes de secours",linkedAccounts:"Comptes SSO liés",linkedAccountsDesc:"Ces fournisseurs d'identité externes sont liés à votre compte.",oidcUnlinked:"Compte dissocié."},oidc:{title:"Fournisseurs SSO / OIDC",desc:"Configurez des fournisseurs OpenID Connect pour l'authentification unique.",addProvider:"Ajouter un fournisseur",newProvider:"Nouveau fournisseur",empty:"Aucun fournisseur OIDC configuré.",created:"Fournisseur créé.",updated:"Fournisseur mis à jour.",deleted:"Fournisseur supprimé.",deleteTitle:"Supprimer le fournisseur",deleteMessage:'Supprimer "{{name}}" ? Tous les comptes liés seront déconnectés.',form:{name:"Nom d'affichage",issuerUrl:"URL de l'émetteur",clientId:"ID client",clientSecret:"Secret client",scopes:"Scopes",iconUrl:"URL de l'icône (optionnel)",enabled:"Activé",autoCreate:"Créer les utilisateurs automatiquement",autoCreateDesc:"Crée automatiquement un compte local lors de la première connexion.",autoLink:"Lier automatiquement les comptes existants",autoLinkDesc:"Lie les comptes locaux existants par e-mail lors de la première connexion.",secretHint:"laisser vide pour conserver",secretPlaceholder:"nouveau secret",emailClaim:"Claim e-mail",emailClaimDesc:"Claim JWT utilisé comme identité e-mail. Utiliser 'preferred_username' ou 'upn' pour Azure Entra ID (qui n'envoie pas email_verified). Utiliser uniquement des noms de claims de confiance.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"Exiger la vérification e-mail",requireEmailVerifiedDesc:"N'accepter le claim e-mail que si le fournisseur le marque comme vérifié.",requireEmailVerifiedWarning:"Avertissement : l'e-mail sera accepté sans vérification. À utiliser uniquement avec des fournisseurs de confiance.",requireEmailVerifiedAutoLink:"Désactiver le lien automatique d'abord pour modifier ce paramètre."}},spoolbuddy:{infoTitle:"Périphériques SpoolBuddy",infoBody:"Les bornes SpoolBuddy s'enregistrent automatiquement via heartbeat. Désinscrivez ici un appareil qui n'est plus utilisé ou un doublon obsolète laissé par un crash du daemon.",duplicatesTitle:"{{count}} appareils enregistrés",duplicatesBody:"Seul le premier appareil enregistré est utilisé par l'interface du kiosk. Si l'un de ces appareils est un doublon obsolète issu d'un crash, désinscrivez-le — un appareil en ligne se ré-enregistrera automatiquement au prochain heartbeat.",empty:"Aucun appareil SpoolBuddy enregistré pour le moment.",online:"En ligne",offline:"Hors ligne",unregister:"Désinscrire",unregisterSuccess:"Appareil désinscrit",unregisterError:"Échec de la désinscription",confirmTitle:"Désinscrire l'appareil SpoolBuddy ?",confirmBody:`Cela retirera "{{hostname}}" ({{deviceId}}) de la base de données. Si l'appareil est en ligne, il se ré-enregistrera automatiquement au prochain heartbeat.`,ipAddress:"Adresse IP",firmware:"Firmware",lastSeen:"Dernière activité",daemonUptime:"Uptime du daemon",systemUptime:"Uptime système",never:"jamais",nfc:"NFC",scale:"Balance",cpuTemp:"Temp. CPU",memory:"Mémoire",disk:"Disque",update:"Mettre à jour",updateConfirmTitle:"Mettre à jour le daemon Spoolbuddy ?",updateConfirmBody:'Déclencher une mise à jour logicielle sur "{{hostname}}" ? Le daemon redémarrera une fois la mise à jour appliquée.',restartBrowser:"Redémarrer le navigateur",restartBrowserConfirmTitle:"Redémarrer le navigateur du kiosk ?",restartBrowserConfirmBody:`Redémarrer le navigateur du kiosk sur "{{hostname}}" ? L'écran sera momentanément vide.`,restartDaemon:"Redémarrer le daemon",restartDaemonConfirmTitle:"Redémarrer le daemon Spoolbuddy ?",restartDaemonConfirmBody:`Redémarrer le daemon Spoolbuddy sur "{{hostname}}" ? L'appareil sera hors ligne quelques secondes.`,reboot:"Redémarrer",rebootConfirmTitle:"Redémarrer l'appareil ?",rebootConfirmBody:`Redémarrer "{{hostname}}" ? L'appareil sera hors ligne pendant environ une minute.`,shutdown:"Éteindre",shutdownConfirmTitle:"Éteindre l'appareil ?",shutdownConfirmBody:`Éteindre "{{hostname}}" ? Vous aurez besoin d'un accès physique pour le rallumer.`,commandConfirm:"Confirmer",commandQueued:"Commande en file d'attente",commandError:"Échec de l'envoi de la commande"}},notification:{printStarted:{title:"Impression démarrée",body:"{{printer}} : {{filename}} commence l'impression"},printCompleted:{title:"Impression terminée",body:"{{printer}} : {{filename}} a réussi"},printFailed:{title:"Impression échouée",body:"{{printer}} : {{filename}} a échoué"},printStopped:{title:"Impression arrêtée",body:"{{printer}} : {{filename}} a été arrêtée"},printProgress:{title:"Progression d'impression",body:"{{printer}} : {{filename}} est à {{percent}}%"},printerOffline:{title:"Imprimante hors ligne",body:"{{printer}} est déconnectée"},printerError:{title:"Erreur imprimante",body:"{{printer}} : {{error}}"},filamentLow:{title:"Filament bas",body:"{{printer}} : Le filament est presque vide"},maintenanceDue:{title:"Maintenance due",body:"{{printer}} : {{items}} demandent votre attention"}},errors:{generic:"Une erreur est survenue",networkError:"Erreur réseau. Vérifiez votre connexion.",notFound:"Non trouvé",unauthorized:"Non autorisé",serverError:"Erreur serveur",validationError:"Vérifiez vos saisies",printerConnectionFailed:"Échec connexion imprimante",saveFailed:"Échec enregistrement",deleteFailed:"Échec suppression",loadFailed:"Échec chargement"},hmsErrors:{title:"Erreurs - {{name}}",noErrors:"Aucune erreur",viewOnWiki:"Voir sur le Wiki Bambu Lab",clearInstructions:"Effacez les erreurs sur l'imprimante pour les retirer ici.",clearErrors:"Effacer les erreurs",clearSuccess:"Erreurs HMS effacées",clearFailed:"Échec de l'effacement des erreurs HMS"},mqttDebug:{title:"Journal de débogage MQTT",searchPlaceholder:"Chercher topic ou message...",noMessages:"Aucun message enregistré",startLoggingHint:'Cliquez sur "Démarrer" pour capturer les messages MQTT',noMessagesMatch:"Aucun message ne correspond",adjustFilterHint:"Ajustez votre recherche",incoming:"Entrant",outgoing:"Sortant",loggingStopped:"Enregistrement arrêté",loggingActive:"Enregistrement actif - rafraîchissement auto",startLogging:"Démarrer",stopLogging:"Arrêter",clearLog:"Effacer le journal",topic:"Topic",timestamp:"Horodatage",direction:"Direction",all:"Tous"},printerFiles:{title:"Gestionnaire de fichiers",storageUsed:"Utilisé :",storageFree:"Libre :",filterPlaceholder:"Filtrer les fichiers...",deleteButton:"Supprimer",deleteFiles:"Supprimer {{count}} fichiers",deleteFileConfirm:'Supprimer "{{name}}" ?',deleteFilesConfirm:"Supprimer les {{count}} fichiers sélectionnés ?",noFiles:"Aucun fichier sur l'imprimante",loadingFiles:"Chargement...",failedToLoad:"Échec chargement fichiers",toast:{filesDeleted:"{{count}} fichier(s) supprimé(s)",deleteFailed:"Échec suppression : {{error}}"}},confirm:{delete:"Voulez-vous vraiment supprimer cet élément ?",unsavedChanges:"Changements non sauvegardés. Voulez-vous quitter ?",clearQueue:"Voulez-vous vraiment vider la file d'attente ?"},login:{title:"Connexion Bambuddy",subtitle:"Connectez-vous à votre compte",username:"Utilisateur",usernamePlaceholder:"Entrez votre utilisateur",usernameOrEmail:"Utilisateur ou Email",usernameOrEmailPlaceholder:"Utilisateur ou @ Email",password:"Mot de passe",passwordPlaceholder:"Entrez votre mot de passe",signIn:"Se connecter",signingIn:"Connexion...",rememberMe:"Se souvenir de moi",forgotPassword:"Mot de passe oublié ?",loginSuccess:"Connecté avec succès",loginFailed:"Échec de connexion",enterCredentials:"Entrez vos identifiants",enterEmail:"Veuillez entrer votre adresse e-mail",oidcLoginFailed:"Échec de la connexion OIDC",oidcErrors:{providerError:"Le fournisseur d'identité a renvoyé une erreur",missingParameters:"Il manque des paramètres requis dans le callback OIDC",invalidState:"L'état OIDC est invalide ou a déjà été utilisé",stateExpired:"La session OIDC a expiré — veuillez réessayer",providerNotFound:"Fournisseur OIDC introuvable",discoveryFailed:"Impossible de récupérer le document de découverte OIDC",invalidDiscovery:"Le document de découverte OIDC est invalide",networkError:"Erreur réseau lors de l'échange de jeton OIDC",badResponse:"Réponse inattendue lors de l'échange de jeton OIDC",noIdToken:"Le fournisseur OIDC n'a pas renvoyé de jeton d'identité",validationFailed:"La validation du jeton OIDC a échoué",nonceMismatch:"Le nonce OIDC ne correspond pas — possible attaque par rejeu",missingSubClaim:"Le jeton OIDC est dépourvu de la revendication sub",noLinkedAccount:"Aucun compte local est lié à cette identité OIDC",accountInactive:"Votre compte est inactif",userResolutionFailed:"Impossible de résoudre votre compte",internalError:"Une erreur interne est survenue lors de la connexion OIDC",tokenExchangeFailed:"L'échange de jeton OIDC a échoué"},forgotPasswordTitle:"Mot de passe oublié",forgotPasswordMessage:"Contactez votre administrateur pour réinitialiser votre accès.",forgotPasswordEmailMessage:"Entrez votre email pour recevoir un nouveau mot de passe.",emailAddress:"Adresse Email",emailPlaceholder:"votre.email@exemple.com",cancel:"Annuler",sending:"Envoi...",sendResetEmail:"Envoyer l'email",howToReset:"Comment réinitialiser :",resetStep1:"Contactez votre admin Bambuddy",resetStep2:"Demandez une réinitialisation dans la Gestion Utilisateurs",resetStep3:"Il vous donnera un mot de passe temporaire",resetStep4:"Connectez-vous et changez-le dans les Paramètres",gotIt:"Compris",twoFA:{title:"Authentification à deux facteurs",subtitle:"Votre compte est protégé par la 2FA. Saisissez le code de vérification ci-dessous.",methodAuthenticator:"Application d'authentification",methodEmail:"Code par e-mail",methodBackup:"Code de récupération",instructionsTotp:"Ouvrez votre application d'authentification et saisissez le code à 6 chiffres pour Bambuddy.",instructionsEmail:"Un code à 6 chiffres a été envoyé à votre adresse e-mail. Il est valable 10 minutes.",instructionsEmailNotSent:"Cliquez ci-dessous pour recevoir un code de vérification par e-mail.",instructionsBackup:"Saisissez l'un de vos codes de récupération à 8 caractères. Chaque code ne peut être utilisé qu'une seule fois.",sendCodeButton:"Envoyer le code par e-mail",sendingCode:"Envoi en cours...",resendCode:"Renvoyer le code",codeLabel:"Code de vérification",backupCodeLabel:"Code de récupération",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Vérifier",verifyingButton:"Vérification en cours...",backToLogin:"← Retour à la connexion",orContinueWith:"ou continuer avec",signInWith:"Se connecter avec {{provider}}",enterCode:"Veuillez entrer le code de vérification",sendCodeFailed:"Échec de l'envoi du code de vérification",invalidCode:"Code invalide. Veuillez réessayer."},resetPassword:{title:"Définir un nouveau mot de passe",subtitle:"Saisissez et confirmez votre nouveau mot de passe ci-dessous.",newPassword:"Nouveau mot de passe",newPasswordPlaceholder:"Au moins 8 caractères",confirmPassword:"Confirmer le mot de passe",confirmPasswordPlaceholder:"Répéter le nouveau mot de passe",saving:"Enregistrement…",submit:"Définir le mot de passe",backToLogin:"Retour à la connexion",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Le mot de passe doit contenir au moins 8 caractères",resetFailed:"Échec de la réinitialisation. Le lien a peut-être expiré."}},setup:{title:"Configuration Bambuddy",subtitle:"Configurez l'authentification",enableAuth:"Activer l'authentification",adminAccount:"Compte Admin",adminAccountDesc:"Si des admins existent, ils seront utilisés. Sinon, créez-en un ci-dessous.",adminUsername:"Utilisateur Admin",adminPassword:"Mot de passe Admin",optionalIfAdminExists:"(optionnel si admin existe)",adminUsernamePlaceholder:"Nom admin (optionnel)",adminPasswordPlaceholder:"Mdp admin (optionnel)",confirmPassword:"Confirmer mdp",confirmPasswordPlaceholder:"Confirmez mdp admin",settingUp:"Configuration...",completeSetup:"Terminer la configuration",toast:{authEnabledAdminCreated:"Authentification activée et admin créé",authEnabledExistingAdmins:"Authentification activée avec admins existants",setupCompleted:"Configuration terminée",enterBothCredentials:"Entrez les deux ou laissez vide pour utiliser les admins existants",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères"}},changePassword:{title:"Changer le mot de passe",currentPassword:"Mot de passe actuel",currentPasswordPlaceholder:"Entrez mdp actuel",newPassword:"Nouveau mot de passe",newPasswordPlaceholder:"Nouveau mdp (min 6 char)",confirmPassword:"Confirmer nouveau mdp",confirmPasswordPlaceholder:"Confirmez nouveau mdp",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères",changing:"Changement...",success:"Mot de passe modifié",failed:"Échec modification"},plateAlert:{title:"Impression en Pause !",message:"Objets détectés sur le plateau. L'impression a été suspendue automatiquement. Videz le plateau avant de reprendre.",understand:"J'ai compris"},camera:{title:"Vue Caméra",invalidPrinterId:"ID imprimante invalide",live:"Direct",snapshot:"Instantané",restartStream:"Redémarrer le flux",refreshSnapshot:"Rafraîchir l'image",fullscreen:"Plein écran",exitFullscreen:"Quitter plein écran",connectingToCamera:"Connexion caméra...",capturingSnapshot:"Capture...",connectionLost:"Connexion perdue",connectionFailed:"Échec connexion caméra",reconnecting:"Reconnexion dans {{countdown}}s... (essai {{attempt}}/{{max}})",reconnectNow:"Reconnexion immédiate",cameraUnavailable:"Caméra indisponible",cameraUnavailableDesc:"Vérifiez que l'imprimante est allumée.",noCamera:"Aucune caméra disponible",retry:"Réessayer",cameraStream:"Flux caméra",zoomOut:"Zoom arrière",zoomIn:"Zoom avant",resetZoom:"Réinitialiser zoom",recording:"Enregistrement",startRecording:"Démarrer l'enregistrement",stopRecording:"Arrêter l'enregistrement",chamberLight:"Basculer lumière chambre"},groups:{title:"Gestion des Groupes",subtitle:"Gérez les permissions pour le contrôle d'accès",backToSettings:"Retour aux paramètres",createGroup:"Créer un groupe",noPermission:"Accès refusé.",system:"Système",noDescription:"Pas de description",usersCount:"{{count}} utilisateurs",permissionsCount:"{{count}} permissions",edit:"Modifier",delete:"Supprimer",toast:{created:"Groupe créé",updated:"Groupe mis à jour",deleted:"Groupe supprimé",enterGroupName:"Entrez un nom de groupe"},modal:{editGroup:"Modifier le groupe",createGroup:"Créer un groupe",cancel:"Annuler",saving:"Enregistrement...",creating:"Création...",saveChanges:"Enregistrer"},form:{groupName:"Nom du groupe",groupNamePlaceholder:"Nom du groupe",systemGroupWarning:"Les groupes système sont fixes",description:"Description",descriptionPlaceholder:"Description (optionnel)",permissions:"Permissions ({{count}} sélectionnées)"},deleteModal:{title:"Supprimer le groupe",message:"Les utilisateurs de ce groupe perdront ces permissions.",confirm:"Supprimer"},editor:{title:"Modifier le groupe",createTitle:"Créer un groupe",search:"Rechercher des permissions...",selectAll:"Tout sélectionner",clearAll:"Tout désélectionner",permissionsSelected:"{{count}} sélectionnée(s)",noResults:"Aucune permission ne correspond à votre recherche"}},users:{title:"Gestion des Utilisateurs",subtitle:"Gérez les accès à Bambuddy",backToSettings:"Retour aux paramètres",createUser:"Créer un utilisateur",noPermission:"Accès refusé.",admin:"Admin",noGroups:"Aucun groupe",active:"Actif",inactive:"Inactif",edit:"Modifier",delete:"Supprimer",system:"Système",noGroupsAvailable:"Aucun groupe disponible",table:{username:"Utilisateur",groups:"Groupes",status:"Statut",actions:"Actions"},toast:{created:"Utilisateur créé",updated:"Utilisateur mis à jour",deleted:"Utilisateur supprimé",fillRequired:"Remplissez les champs requis",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères"},modal:{createUser:"Créer utilisateur",editUser:"Modifier utilisateur",cancel:"Annuler",creating:"Création...",saving:"Enregistrement...",saveChanges:"Enregistrer",advancedAuthSubtitle:"avec Authentification Avancée"},form:{username:"Utilisateur",usernamePlaceholder:"Nom utilisateur",email:"Email",emailPlaceholder:"utilisateur@exemple.com",password:"Mot de passe",passwordPlaceholder:"Mot de passe",confirmPassword:"Confirmer mdp",confirmPasswordPlaceholder:"Confirmez mdp",newPasswordPlaceholder:"Nouveau mdp",confirmNewPasswordPlaceholder:"Confirmez nouveau mdp",leaveBlankToKeep:"Laissez vide pour conserver l'actuel",groups:"Groupes",optional:"optionnel",autoGeneratedPassword:"Un mot de passe sera généré et envoyé par email.",passwordManagedByAdvancedAuth:'Géré par Auth Avancée. Utilisez "Réinitialiser" pour envoyer un nouveau mdp par email.',resetPassword:"Réinitialiser le mot de passe",resettingPassword:"Réinitialisation..."},deleteModal:{title:"Supprimer utilisateur",message:"Cette action est irréversible.",confirm:"Supprimer"}},streamOverlay:{title:"Superposition Flux",invalidPrinterId:"ID invalide",cameraStream:"Flux caméra",progress:"Progression",eta:"Fin estimée",printerIdle:"Imprimante inactive",printerOffline:"Imprimante hors ligne",status:{printing:"Impression",paused:"En pause",finished:"Terminée",failed:"Échouée",idle:"Inactive",unknown:"Inconnue"}},profiles:{title:"Profils",subtitle:"Gérez vos presets slicer et calibrations Pressure Advance",tabs:{cloud:"Profils Cloud",local:"Profils Locaux",kprofiles:"K-Profiles"},localProfiles:{title:"Profils Locaux",subtitle:"Gérez vos presets OrcaSlicer",import:"Importer Profils",importDesc:"Déposez les fichiers .bbscfg, .bbsflmt, .orca_filament, .zip ou .json",importing:"Importation...",search:"Chercher un preset...",noPresets:"Aucun preset local",badge:"Local",edit:"Modifier",delete:"Supprimer",cancel:"Annuler",deleteConfirmTitle:"Supprimer Preset",deleteConfirm:"Supprimer définitivement ce preset ?",source:"Source",inheritsFrom:"Hérite de",filamentType:"Type",vendor:"Vendeur",compatiblePrinters:"Imprimantes",nozzleTemp:"Temp Buse",cost:"Coût",density:"Densité",pressureAdvance:"Pressure Advance",filament:"Filament",process:"Processus",printer:"Imprimante",toast:{importSuccess:"{{count}} profil(s) importé(s)",importSkipped:"{{count}} profil(s) ignoré(s) (doublons)",importError:"{{count}} erreur(s) d'import",deleted:"Preset supprimé",updated:"Preset mis à jour"}},connectedAs:"Connecté en tant que",logout:"Déconnexion",noLogoutPermission:"Pas d'autorisation de déconnexion",failedToLoad:"Échec chargement profils",retry:"Réessayer",time:{justNow:"À l'instant",minsAgo:"Il y a {{count}}m",hoursAgo:"Il y a {{count}}h",daysAgo:"Il y a {{count}}j"},toast:{loggedOut:"Déconnecté"},login:{title:"Connexion Bambu Cloud",subtitle:"Synchronisez vos presets slicer",email:"Email",password:"Mot de passe",region:"Région",regionGlobal:"Global",regionChina:"Chine",verificationCode:"Code de vérification",totpCode:"Code Authenticator",checkEmail:"Code envoyé à {{email}}",enterTotpHint:"Entrez le code 2FA",accessToken:"Jeton d'accès (Access Token)",accessTokenHint:"Collez le jeton (depuis Bambu Studio)",back:"Retour",loginButton:"Connexion",verifyButton:"Vérifier",setTokenButton:"Définir Jeton",useToken:"Utiliser jeton d'accès",useEmail:"Connexion par email",toast:{loggedIn:"Connecté avec succès",codeSent:"Code envoyé par email",enterTotp:"Entrez le code Authenticator",tokenSet:"Jeton défini"}},presets:{myPreset:"Mon preset (modifiable)",duplicate:"Dupliquer",editable:"Modifiable",failedToLoadDetails:"Échec détails preset",deleteConfirm:"Supprimer ce preset ?",deleteWarning:'Ceci supprimera "{{name}}" de Bambu Cloud définitivement.',noDuplicatePermission:"Pas d'autorisation duplication",noEditPermission:"Pas d'autorisation modification",noDeletePermission:"Pas d'autorisation suppression",types:{filament:"Preset filament",printer:"Preset imprimante",process:"Preset processus"},toast:{deleted:"Preset supprimé",created:"Preset créé",updated:"Preset mis à jour",duplicated:"Preset dupliqué",fieldAdded:'Champ "{{key}}" ajouté',exported:"Preset exporté"},baseLabel:"Base : {{name}}",currentLabel:"Actuel : {{name}}",newPreset:"Nouveau Preset",editPreset:"Modifier Preset",duplicatePreset:"Dupliquer Preset",createNewPreset:"Créer un nouveau Preset",customizeSettings:"Personnalisez vos réglages",compareWithBase:"Comparer avec la base",compare:"Comparer",basePreset:"Preset de base",selectBasePreset:"Choisir preset de base...",presetName:"Nom du preset",myCustomPreset:"Mon preset personnalisé",inheritsFrom:"Hérite de",dropJsonToImport:"Glissez JSON pour importer",tabs:{common:"Commun",allFields:"Tous les champs"},availableFields:"Champs disponibles",searchFieldsPlaceholder:"Chercher un champ...",noMatchingFields:"Aucun champ trouvé",allFieldsAdded:"Tous les champs sont ajoutés",addCustomField:"Ajouter un champ personnalisé",yourOverrides:"Vos modifications",noOverridesYet:"Aucune modification",clickFieldsToAdd:"Cliquez à gauche pour ajouter",saveAsTemplate:"Enregistrer comme modèle",jsonTip:"Conseil : Glissez un .json pour importer les réglages"},cloudView:{searchPlaceholder:"Chercher presets...",templates:"Modèles",refresh:"Rafraîchir",newPreset:"Nouveau Preset",clearFilters:"Effacer filtres",compareMode:"Mode Comparaison",selectAnotherPreset:"Choisir un autre preset {{type}}",clickTwoPresets:"Choisissez deux presets de même type",selectFirst:"1. Sélectionner premier",selectSecond:"2. Sélectionner second",compareNow:"Comparer maintenant",lastSynced:"Synchronisé :",showingCount:"{{showing}} sur {{total}} presets",noPresetsFound:"Aucun preset trouvé",columns:{filament:"Filament",process:"Processus",printer:"Imprimante"},noFilamentPresets:"Pas de preset filament",noProcessPresets:"Pas de preset processus",noPrinterPresets:"Pas de preset imprimante",filters:{type:"Type",owner:"Propriétaire",printer:"Imprimante",nozzle:"Buse",filament:"Filament",layer:"Couche",all:"Tous",myPresets:"Mes Presets",builtIn:"Inclus",process:"Processus"},noTemplatesPermission:"Pas d'autorisation modèles",noRefreshPermission:"Pas d'autorisation rafraîchissement",noCreatePermission:"Pas d'autorisation création"},templates:{title:"Modèles rapides",noTemplates:"Aucun modèle",createFirst:"Créez-en depuis l'éditeur de preset",typeFilter:"Type :",deleteTitle:"Supprimer modèle",deleteWarning:"Action irréversible",deleteConfirm:'Supprimer "{{name}}" ?',namePlaceholder:"Nom du modèle",descriptionPlaceholder:"Description",settingsJson:"Paramètres (JSON)",fieldsCount:"{{count}} champs",shownInModals:"Visible dans fenêtres",hiddenInModals:"Masqué dans fenêtres",apply:"Appliquer",toast:{deleted:"Modèle supprimé",updated:"Modèle mis à jour",created:"Modèle créé",applied:"Modèle appliqué"}}},support:{debugLoggingActive:"Débogage actif",manageLogs:"Gérer",collectItem7:"Connectivité et versions firmware",collectItem8:"Statut intégrations (Spoolman, MQTT, HA)",collectItem9:"Interfaces réseau (sous-réseaux)",collectItem10:"Versions packages Python",collectItem11:"Santé base de données",collectItem12:"Détails environnement Docker"},fileManager:{title:"Gestionnaire de fichiers",subtitle:"Organisez vos fichiers d'impression",uploadFiles:"Téléverser fichiers",newFolder:"Nouveau dossier",folderName:"Nom du dossier",folderNamePlaceholder:"ex: Pièces Utiles",renameFile:"Renommer fichier",renameFolder:"Renommer dossier",moveFiles:"Déplacer {{count}} fichier(s)",rootNoFolder:"Racine (aucun dossier)",current:"actuel",linkFolder:"Lier le dossier",linkFolderDescription:'Lier "{{name}}" à un projet ou archive.',project:"Projet",archive:"Archive",noProjectsFound:"Aucun projet trouvé",noArchivesFound:"Aucune archive trouvée",unlink:"Délier",link:"Lier",dragDropFiles:"Glissez les fichiers ici",dropFilesHere:"Déposez ici",orClickToBrowse:"ou cliquez pour parcourir",allFileTypesSupported:"Tous types supportés. ZIP extraits.",zipFilesDetected:"ZIP détectés",zipExtractOptions:"Choix de structure pour ZIP :",preserveZipStructure:"Garder structure ZIP",createFolderFromZip:"Dossier par nom du ZIP",stlThumbnailGeneration:"Vignettes STL",zipMayContainStl:"Extraction vignettes possible pour STL.",thumbnailsCanBeGenerated:"Génération vignettes (peut être long).",generateThumbnailsForStl:"Générer vignettes STL",threemfDetected:"Fichiers 3MF détectés",threemfExtractionInfo:"Réglages extraits auto du 3MF.",willBeExtracted:"Sera extrait",filesExtracted:"{{count}} fichiers extraits",uploadComplete:"Terminé : {{succeeded}} succès",uploadFailed:"Échec du téléversement",zipFilesFailed:"{{count}} fichiers échoués",uploading:"Téléversement...",changeLink:"Modifier lien...",linkTo:"Lier à...",linkToProjectOrArchive:"Lier à projet ou archive",addToQueue:"Ajouter à la file",schedulePrint:"Planifier",generateThumbnail:"Générer vignette",generateThumbnails:"Générer vignettes",generateThumbnailsForMissing:"Vignettes STL manquantes",gridView:"Grille",listView:"Liste",lowDiskSpaceWarning:"Espace disque faible",lowDiskSpaceDetails:"{{free}} libre sur {{total}}. Seuil : {{threshold}} Go.",files:"Fichiers",folders:"Dossiers",size:"Taille",free:"Libre",allFiles:"Tous les fichiers",wrap:"Retour ligne",enableTextWrapping:"Activer retour ligne",disableTextWrapping:"Désactiver retour ligne",collapse:"Réduire",collapseFoldersByDefault:"Réduire les dossiers par défaut",expandFoldersByDefault:"Développer les dossiers par défaut",dragToResizeTooltip:"Glisser pour redimensionner, double-clic reset",searchFiles:"Chercher fichiers...",allTypes:"Tous types",prints:"Impressions",ascending:"Croissant",descending:"Décroissant",resultsCount:"{{showing}} sur {{total}} fichiers",selectAll:"Tout sélectionner",deselectAll:"Tout désélectionner",selected:"{{count}} sélectionnés",adding:"Ajout...",loadingFiles:"Chargement...",folderIsEmpty:"Dossier vide",noFilesYet:"Aucun fichier",folderEmptyDescription:"Téléversez ou déplacez des fichiers ici.",noFilesDescription:"Téléversez des fichiers pour organiser.",noMatchingFiles:"Aucun fichier correspondant",noMatchingFilesDescription:"Ajustez votre recherche.",clearFilters:"Effacer filtres",printedCount:"Imprimé {{count}}x",uploadedBy:"Téléversé par",deleteFolder:"Supprimer dossier",deleteFile:"Supprimer fichier",deleteFilesCount:"Supprimer {{count}} fichiers",deleteFolderConfirm:"Supprimer le dossier et son contenu ?",deleteFileConfirm:"Supprimer ce fichier ?",deleteFilesConfirm:"Supprimer {{count}} fichiers définitivement ?",deleting:"Suppression...",noPermissionRenameFolder:"Pas d'autorisation renommage",noPermissionLinkFolder:"Pas d'autorisation lien",noPermissionDeleteFolder:"Pas d'autorisation suppression dossier",noPermissionPrint:"Pas d'autorisation impression",noPermissionSlice:"You do not have permission to slice files",noPermissionAddToQueue:"Pas d'autorisation file",noPermissionDownload:"Pas d'autorisation téléchargement",noPermissionRenameFile:"Pas d'autorisation renommage fichier",noPermissionGenerateThumbnail:"Pas d'autorisation vignettes",noPermissionDeleteFile:"Pas d'autorisation suppression fichier",noPermissionCreateFolder:"Pas d'autorisation nouveau dossier",noPermissionUpload:"Pas d'autorisation téléversement",noPermissionMoveFiles:"Pas d'autorisation déplacement",noPermissionDeleteFiles:"Pas d'autorisation suppression groupée",linkExternal:"Lier externe",linkExternalFolder:"Lier un dossier externe",linkExternalFolderDescription:"Monter un répertoire hôte (NAS, USB, partage réseau) dans le gestionnaire de fichiers. Les fichiers ne sont pas copiés — ils sont lus directement depuis le chemin d'origine.",externalFolderNamePlaceholder:"ex. Impressions NAS",externalPath:"Chemin hôte",externalPathHelp:"Chemin absolu du répertoire sur l'hôte Docker. Doit être monté en bind dans le conteneur.",readOnly:"Lecture seule",readOnlyHelp:"empêche les téléversements et suppressions",showHiddenFiles:"Afficher les fichiers cachés (fichiers point)",externalFolder:"Dossier externe",scanFolder:"Scanner",toast:{folderCreated:"Dossier créé",folderDeleted:"Dossier supprimé",fileDeleted:"Fichier supprimé",filesDeleted:"{{count}} fichiers supprimés",filesMoved:"Fichiers déplacés",folderLinked:"Dossier lié",folderUnlinked:"Dossier délié",externalFolderLinked:"Dossier externe lié et scanné",folderScanned:"Scan terminé : {{added}} ajoutés, {{removed}} supprimés",addedToQueue:"{{count}} fichier(s) ajouté(s)",addedToQueuePartial:"{{added}} ajoutés, {{failed}} échecs",failedToAddToQueue:"Échec ajout file : {{error}}",fileRenamed:"Fichier renommé",folderRenamed:"Dossier renommé",thumbnailsGenerated:"{{count}} vignette(s) générée(s)",thumbnailsGeneratedPartial:"{{succeeded}} succès, {{failed}} échecs",noStlMissingThumbnails:"Aucun STL sans vignette",failedToGenerateThumbnails:"Échec vignettes : {{error}}",thumbnailGenerated:"Vignette générée",failedToGenerateThumbnail:"Échec vignette : {{error}}"}},projects:{title:"Projets",subtitle:"Suivez vos projets d'impression 3D",newProject:"Nouveau Projet",editProject:"Modifier Projet",deleteProject:"Supprimer Projet",projectName:"Nom du Projet",description:"Description",noProjects:"Aucun projet",noProjectsFiltered:"Aucun projet {{status}}",noProjectsFilteredHelp:`Vous n'avez aucun projet "{{status}}". Les projets apparaîtront ici lorsque leur statut changera.`,createFirst:"Créez votre premier projet pour organiser vos builds.",createFirstButton:"Créer votre premier projet",create:"Créer",files:"Fichiers",prints:"Impressions",plates:"plateaux",parts:"pièces",lastModified:"Modifié le",deleteConfirm:"Supprimer ce projet ? Les archives seront déliées mais conservées.",addFiles:"Ajouter fichiers",removeFile:"Retirer fichier",viewDetails:"Détails",namePlaceholder:"ex: Build Voron 2.4",descriptionPlaceholder:"Description optionnelle...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"L'URL doit commencer par http:// ou https://",openExternalUrl:"Ouvrir l’URL du projet",coverImageLabel:"Photo de couverture",coverImageAlt:"Photo de couverture du projet",coverImageUpload:"Téléverser",coverImageReplace:"Remplacer",coverImageRemove:"Supprimer",color:"Couleur",targetPlates:"Plateaux cibles",targetPlatesPlaceholder:"ex: 25",targetPlatesHelp:"Nombre total de jobs",targetParts:"Pièces cibles",targetPartsPlaceholder:"ex: 150",targetPartsHelp:"Nombre total d'objets",tagsLabel:"Tags (séparés par virgules)",tagsPlaceholder:"ex: voron, cadeau",dueDate:"Échéance",priority:"Priorité",priorityLow:"Basse",priorityNormal:"Normale",priorityHigh:"Haute",priorityUrgent:"Urgente",statusActive:"Actif",statusCompleted:"Terminé",statusArchived:"Archivé",done:"Fait",completed:"terminé",failed:"échoué",inQueue:"en file",noPrintsYet:"Aucune impression",printJobs:"Jobs (plateaux)",partsPrinted:"Pièces imprimées",failedParts:"Pièces échouées",import:"Importer",export:"Exporter",importProject:"Importer projet",exportAll:"Exporter tous les projets",loading:"Chargement des projets...",noEditPermission:"Pas d'autorisation de modification",noDeletePermission:"Pas d'autorisation de suppression",noCreatePermission:"Pas d'autorisation de création",noImportPermission:"Pas d'autorisation d'import",noExportPermission:"Pas d'autorisation d'export",toast:{created:"Projet créé",updated:"Projet mis à jour",deleted:"Projet supprimé",imported:"Projet importé",multipleImported:"{{count}} projets importés",importFailed:"Échec d'import",exported:"Projets exportés (métadonnées)"}},projectDetail:{notFound:"Projet non trouvé",backToProjects:"Retour aux Projets",export:"Exporter",exportProject:"Exporter projet",noExportPermission:"Pas d'autorisation export",noEditPermission:"Pas d'autorisation modification",partOf:"Fait partie de :",priorityLabel:"Priorité :",noPrints:"Aucune impression dans ce projet",status:{active:"Actif",completed:"Terminé",archived:"Archivé"},priority:{low:"Basse",normal:"Normale",high:"Haute",urgent:"Urgente"},dueDate:{overdue:"En retard",today:"Aujourd'hui",daysLeft:"{{count}} jours restants"},progress:{platesProgress:"Progression Plateaux",partsProgress:"Progression Pièces",printJobs:"jobs d'impression",parts:"pièces",percentComplete:"{{percent}}% terminé",remaining:"{{count}} restant(s)"},stats:{printJobs:"Jobs d'Impression",total:"total",failed:"{{count}} échecs",partsPrinted:"{{count}} pièces imprimées",printTime:"Temps d'Impression",filamentUsed:"Filament utilisé"},cost:{title:"Suivi des coûts",filamentCost:"Coût Filament",energy:"Énergie",totalCost:"Coût Total",total:"Total",includesBom:"BOM incluse",budget:"Budget",remaining:"Restant"},subProjects:{title:"Sous-projets ({{count}})"},notes:{title:"Notes",noEditPermission:"Pas d'autorisation modification",placeholder:"Ajouter des notes...",empty:"Aucune note. Cliquez sur modifier."},files:{title:"Fichiers",linkFolders:"Liez des dossiers depuis le gestionnaire",forQuickAccess:"pour un accès rapide.",fileCount:"{{count}} fichier(s)",empty:"Aucun dossier lié.",noFiles:"Aucun fichier dans ce dossier.",print:"Imprimer maintenant",addToQueue:"Ajouter à la file"},bom:{title:"BOM (Liste matériel)",acquired:"{{completed}}/{{total}} acquis",showAll:"Tout afficher",hideDone:"Masquer acquis",addPart:"Ajouter matériel",noAddPermission:"Pas d'autorisation ajout",partNamePlaceholder:"Nom (ex: Vis M3x8)",partName:"Nom de pièce",qty:"Qté",price:"Prix ({{currency}})",sourcingUrlPlaceholder:"Lien d'achat (optionnel)",remarksPlaceholder:"Remarques (optionnel)",deletePart:"Supprimer pièce",deleteConfirm:'Supprimer "{{name}}" ?',noUpdatePermission:"Pas d'autorisation mise à jour",noEditPermission:"Pas d'autorisation modification",noDeletePermission:"Pas d'autorisation suppression",totalCost:"Coût total :",empty:"BOM vide. Ajoutez du matériel ou de l'électronique."},timeline:{title:"Historique d'activité",empty:"Aucune activité."},template:{saveAsTemplate:"Enregistrer comme modèle",noCreatePermission:"Pas d'autorisation modèle"},queue:{title:"File d'attente",viewAll:"Tout voir",printing:"{{count}} en cours",queued:"{{count}} en file"},prints:{title:"Impressions ({{count}})"},toast:{projectUpdated:"Projet mis à jour",partAdded:"Pièce ajoutée",partRemoved:"Pièce retirée",exportFailed:"Échec export",projectExported:"Projet exporté",templateCreated:"Modèle créé"}},system:{title:"Informations Système",version:"Version",uptime:"Temps de fonctionnement",cpuUsage:"Utilisation CPU",memoryUsage:"Utilisation RAM",diskUsage:"Utilisation Disque",networkInfo:"Infos Réseau",logs:"Journaux",debugMode:"Mode Débogage",enableDebug:"Activer débogage",disableDebug:"Désactiver débogage",downloadLogs:"Télécharger logs",clearLogs:"Effacer logs",dockerInfo:"Infos Docker",containerName:"Nom conteneur",imageName:"Nom image",platform:"Plateforme",architecture:"Architecture"},library:{title:"Bibliothèque Filament",addFilament:"Ajouter Filament",editFilament:"Modifier Filament",deleteFilament:"Supprimer Filament",vendor:"Vendeur",material:"Matériau",color:"Couleur",kFactor:"Facteur K",temperature:"Température",noFilaments:"Bibliothèque vide",deleteConfirm:"Supprimer ce filament ?",importFromPrinter:"Importer de l'imprimante",exportToFile:"Exporter vers fichier"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Intégration Spoolman",enabled:"Spoolman Activé",url:"URL Spoolman",connected:"Connecté",disconnected:"Non Connecté",testConnection:"Tester connexion",sync:"Synchroniser",syncing:"Sync...",lastSync:"Dernière Sync",linkToSpoolman:"Lier à Spoolman",openInSpoolman:"Ouvrir Spoolman",unlinkSpool:"Délier bobine",unlinkConfirmTitle:"Dissocier la bobine?",unlinkConfirmMessage:"Cette opération déconnectera la bobine de Spoolman. Les données de la bobine dans Spoolman resteront inchangées.",selectSpool:"Choisir bobine",noUnlinkedSpools:"Pas de bobine libre",linkSuccess:"Lien réussi",linkFailed:"Échec lien",unlinkSuccess:"Bobine dissociée avec succès",unlinkFailed:"Échec de la dissociation de la bobine",spoolId:"ID Bobine",fillSourceLabel:"(Spoolman)",weight:"Poids",remaining:"Restant",disableWeightSync:"Désactiver Sync poids estimé AMS",disableWeightSyncDesc:"Ne pas utiliser les estimations AMS. Utile si vous préférez le suivi Spoolman.",reportPartialUsage:"Rapporter consommation partielle pour échecs",reportPartialUsageDesc:"Si l'impression échoue, rapporte le filament consommé selon les couches."},inventory:{title:"Inventaire de Bobines",spoolmanMixedContentTitle:"Spoolman ne peut pas se charger en HTTPS — contenu mixte bloqué par votre navigateur",spoolmanMixedContentBody:"Bambuddy est servi en HTTPS (via votre reverse proxy), mais votre URL Spoolman est encore en HTTP. Les navigateurs bloquent le contenu mixte pour des raisons de sécurité, donc l'interface Spoolman intégrée ne peut pas s'afficher. Spoolman doit être accessible en HTTPS.",spoolmanMixedContentFixReverseProxy:"Placez Spoolman derrière le même reverse proxy que Bambuddy (Traefik / Nginx / Caddy) en HTTPS, puis mettez à jour l'URL Spoolman dans les Paramètres avec la nouvelle adresse HTTPS.",spoolmanMixedContentFixOpenNewTab:"Alternative : ouvrez Spoolman dans un nouvel onglet en HTTP — les règles de contenu mixte ne s'appliquent qu'aux cadres intégrés, un onglet autonome fonctionne.",spoolmanOpenInNewTab:"Ouvrir Spoolman dans un nouvel onglet",addSpool:"Ajouter Bobine",editSpool:"Modifier Bobine",material:"Matériau",selectMaterial:"Choisir matériau...",subtype:"Sous-type",brand:"Marque",searchBrand:"Chercher marque...",useCustomBrand:'Utiliser "{{brand}}"',useCustomMaterial:"Utiliser un matériau personnalisé : {{material}}",colorName:"Nom de couleur",colorNamePlaceholder:"Jade White, Fire Red...",color:"Couleur",hexColor:"Code Hex",pickColor:"Choisir couleur perso",labelWeight:"Poids net",coreWeight:"Poids bobine vide",searchSpoolWeight:"Chercher poids bobine...",weightUsed:"Consommé",currentWeight:"Poids restant",measuredWeight:"Poids mesuré",spoolName:"Bobine",costPerKg:"Coût par kg",measuredWeightError:"Le poids mesuré doit être entre {{min}}g et {{max}}g.",slicerFilament:"Filament Slicer",slicerFilamentName:"Nom du Preset Slicer",slicerPreset:"Preset Slicer",searchPresets:"Chercher presets...",selectedPreset:"Sélectionné",noPresetsFound:"Aucun preset trouvé",tempOverrides:"Exceptions Température",note:"Note",notePlaceholder:"Notes additionnelles sur cette bobine...",category:"Catégorie",categoryPlaceholder:"ex. Production, Prototype, Client A",categoryNone:"Sans catégorie",lowStockThresholdOverride:"Seuil bas (cette bobine)",lowStockThresholdOverrideHelp:"Laisser vide pour utiliser le seuil global ({{global}} %).",clearRfid:"Effacer le tag RFID",rfidCleared:"Tag RFID effacé",archive:"Archiver",restore:"Restaurer",noSpools:"Aucune bobine. Ajoutez votre première bobine pour commencer.",noAvailableSpools:"Aucune bobine disponible. Ajoutez une bobine à votre inventaire ou désaffectez-en une d'un autre emplacement.",kProfiles:"K-Profiles",addKProfile:"Ajouter K-Profile",assignSpool:"Assigner Bobine",unassignSpool:"Désassigner",assignSuccess:"Bobine assignée et slot AMS configuré",assignFailed:"Échec assignation",selectSpool:"Choisir une bobine pour ce slot",assigned:"Assigné",assigning:"Assignation...",searchSpools:"Chercher bobines...",showAllSpools:"Afficher toutes les bobines",allMaterials:"Tous Matériaux",filterByBrand:"Filtrer par marque...",showArchived:"Afficher archivées",quickAdd:"Ajout rapide (Stock)",quantity:"Quantité",stock:"Stock",configured:"Configuré",spoolsCreated:"{{count}} bobines créées",spoolCreated:"Bobine créée",spoolUpdated:"Bobine mise à jour",spoolDeleted:"Bobine supprimée",spoolArchived:"Bobine archivée",spoolRestored:"Bobine restaurée",deleteConfirm:"Supprimer définitivement cette bobine ?",archiveConfirm:"Voulez-vous vraiment archiver cette bobine ?",advancedSettings:"Paramètres Avancés",filamentInfoTab:"Infos Filament",paProfileTab:"Profil PA",filamentInfo:"Filament",additional:"Additionnel",loadingPresets:"Chargement des presets cloud...",cloudConnected:"Cloud connecté",cloudNotConnected:"Cloud déconnecté (valeurs par défaut)",recentColors:"Récentes",searchColors:"Chercher couleurs...",searchResults:"Résultats",allColors:"Toutes",commonColors:"Communes",showLess:"Moins",showAll:"Toutes",noColorsFound:"Aucune couleur correspondante",noResults:"Aucun résultat",extraColorsLabel:"Extra colours",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.",extraColorsInvalid:"Ignored invalid hex: {{tokens}}",colorEffectLabel:"Effect",colorEffect:{none:"None",sparkle:"Sparkle",wood:"Wood",marble:"Marble",glow:"Glow",matte:"Matte",silk:"Silk",galaxy:"Galaxy",rainbow:"Rainbow",metal:"Metal",translucent:"Translucent",gradient:"Gradient",dualColor:"Dual Color",triColor:"Tri Color",multicolor:"Multicolor"},selectMaterialFirst:"Veuillez choisir un matériau dans l'onglet Infos Filament.",noPrintersConfigured:"Ajoutez une imprimante pour utiliser les profils PA.",matchingFilter:"Correspondant",anyBrand:"Toute marque",anyVariant:"Toute variante",autoSelect:"Auto-sélection",matches:"correspondances",match:"correspondance",noMatches:"Aucune correspondance",connected:"Connecté",offline:"Hors ligne",printerOffline:"Imprimante hors ligne. Connectez-vous pour voir les profils.",noKProfilesMatch:"Aucun profil K ne correspond au filament.",leftNozzle:"Buse Gauche",rightNozzle:"Buse Droite",profilesSelected:"profil(s) de calibration sélectionné(s)",totalInventory:"Total Inventaire",totalConsumed:"Total Consommé",byMaterial:"Par Matériau",inPrinter:"Dans Imprimante",lowStock:"Stock Bas",sinceTracking:"Depuis le début du suivi",loadedInAms:"Chargé dans AMS/Ext",remaining:"Restant",weightCheck:"Vérification poids",lastWeighed:"Dernière pesée",neverWeighed:"Jamais pesé",search:"Chercher bobines...",showing:"Affichage",to:"à",of:"sur",show:"Voir",spools:"bobines",spool:"bobine",page:"Page",noSpoolsMatch:"Aucun résultat trouvé",noSpoolsMatchDesc:"Ajustez votre recherche ou vos filtres.",active:"Actif",archived:"Archivé",all:"Tous",used:"Occasion",new:"Neuf",clearFilters:"Effacer filtres",table:"Tableau",cards:"Cartes",net:"Net",groupSimilar:"Grouper",groupedSpools:"{{count}} bobines identiques",groupedRows:"lignes",columns:"Colonnes",configureColumns:"Configurer Colonnes",configureColumnsDesc:"Glissez pour ordonner ou utilisez les flèches. Cliquez sur l'œil pour masquer.",visible:"visible",reset:"Reset",cancel:"Annuler",applyChanges:"Appliquer",moveUp:"Monter",moveDown:"Descendre",hideColumn:"Masquer",showColumn:"Afficher",linkToSpool:"Lier à une Bobine",tagLinked:"Tag lié à la bobine",tagLinkFailed:"Échec lien tag",tagAlreadyLinked:"Tag déjà lié à une autre bobine",unknownTag:"Tag RFID inconnu détecté",usageHistory:"Historique de Consommation",noUsageHistory:"Aucune consommation enregistrée",printName:"Nom Impression",weightConsumed:"Poids consommé",clearHistory:"Effacer",historyCleared:"Historique effacé",fillSourceLabel:"(Inv)",lowStockThresholdError:"Le seuil doit être compris entre 0.1 et 99.9",assignMismatchTitle:"Incompatibilité de matériau",assignMismatchMessage:'Le matériau de la bobine sélectionnée "{{spoolMaterial}}" ne correspond pas au matériau du plateau "{{trayMaterial}}" pour {{location}}. Assigner quand même ?',assignMismatchConfirm:"Assigner quand même",assignPartialMismatchMessage:'Le matériau de la bobine "{{spoolMaterial}}" est similaire, mais ne correspond pas exactement à "{{trayMaterial}}" dans {{location}}. Voulez-vous continuer ?',assignProfileMismatchMessage:'Le profil de la bobine "{{spoolProfile}}" ne correspond pas au profil du plateau "{{trayProfile}}" dans {{location}}. Voulez-vous continuer ?'},timelapse:{title:"Timelapse",create:"Créer Timelapse",download:"Télécharger",delete:"Supprimer",preview:"Aperçu",frameRate:"Images/sec",quality:"Qualité",processing:"Traitement...",noTimelapses:"Aucun timelapse"},ams:{title:"AMS",slot:"Slot",empty:"Vide",emptySlot:"Slot vide",unknown:"Inconnu",humidity:"Humidité",temperature:"Température",filamentType:"Type filament",filamentColor:"Couleur",remaining:"Restant",history:"Historique AMS",noHistory:"Aucun historique",configureSlot:"Configurer Slot",externalSpool:"Bobine externe",profile:"Profil",kFactor:"Facteur K",fill:"Remplir",configure:"Configurer",used:"utilisé",remainingUnit:"restant"},printModal:{title:"Lancer l'impression",selectPrinter:"Choisir l'imprimante",selectPlate:"Choisir le plateau",filamentMapping:"Mapping Filament",totalCost:"Coût total :",slotRemainingShort:" - {{grams}}g rest.",printSettings:"Réglages d'impression",bedLeveling:"Nivellement plateau",flowCalibration:"Calibration débit",vibrationCalibration:"Vibration (Input Shaper)",layerInspection:"Inspection 1ère couche",timelapse:"Timelapse",startPrint:"Démarrer",addToQueue:"Ajouter à la file",cancel:"Annuler",noPrintersAvailable:"Aucune imprimante disponible",printerBusy:"L'imprimante est occupée",printerOffline:"L'imprimante est hors ligne",sameTypeDifferentColor:"Même type, couleur différente",filamentTypeNotLoaded:"Type de filament non chargé",openCalendar:"Ouvrir calendrier",leftNozzle:"G",rightNozzle:"D",leftNozzleTooltip:"Buse gauche",rightNozzleTooltip:"Buse droite",filamentOverride:"Remplacement de filament",filamentOverrideHint:"Remplacez optionnellement les filaments pour l'affectation par modèle. Le planificateur utilisera vos filaments sélectionnés au lieu des valeurs 3MF d'origine.",originalFilament:"Original",overrideWith:"Remplacer par",resetToOriginal:"Revenir à l'original",insufficientFilamentTitle:"Filament insuffisant",insufficientFilamentMessage:"Certaines bobines assignées ont moins de filament restant que nécessaire pour cette impression :",insufficientFilamentLine:"{{printer}} - {{slot}} : nécessite {{required}}g, restant {{remaining}}g",printAnyway:"Imprimer quand même",forceColorMatch:"Forcer correspondance des couleurs",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Échelonner sur {{count}} imprimantes",gcodeInjection:"Injecter le G-code auto-impression"},backup:{title:"Sauvegarde & Restauration",createBackup:"Créer Sauvegarde",restoreBackup:"Restaurer Sauvegarde",restoreDescription:"Remplace les données par un fichier de sauvegarde",downloadBackup:"Télécharger Sauvegarde",uploadBackup:"Téléverser Sauvegarde",lastBackup:"Dernière sauvegarde",autoBackup:"Sauvegarde auto",backupNow:"Sauvegarder maintenant",restoreWarning:"Attention : Écrase TOUTES les données actuelles.",includeArchives:"Inclure Archives",includeSettings:"Inclure Paramètres",includeProfiles:"Inclure Profils",backupSuccess:"Sauvegarde réussie",restoreSuccess:"Restauration réussie",backupFailed:"Échec sauvegarde",restoreFailed:"Échec restauration",restoreNote:"L'imprimante virtuelle sera arrêtée pendant la restauration",githubBackup:"Sauvegarde GitHub",enabled:"Activé",cloudLoginRequired:"Connexion Bambu Cloud requise. Connectez-vous sous Profils → Profils Cloud pour activer la sauvegarde GitHub.",cloudLoginRequiredShort:"Connexion Cloud requise",githubDescription:"Synchronisez automatiquement vos profils vers un dépôt GitHub privé pour la sauvegarde et l'historique des versions.",repositoryUrl:"URL du dépôt",personalAccessToken:"Jeton d'accès personnel",tokenSaved:"(enregistré)",enterNewToken:"Entrez un nouveau jeton pour mettre à jour",tokenHint:"Jeton à granularité fine avec permission de lecture/écriture du contenu",branch:"Branche",manualOnly:"Manuel uniquement",hourly:"Toutes les heures",daily:"Quotidien",weekly:"Hebdomadaire",includeInBackup:"Inclure dans la sauvegarde",kProfiles:"K-Profils",kProfilesDescription:"Calibration de l'avance de pression des imprimantes connectées",noPrintersConnected:"Aucune imprimante connectée",printersConnected:"{{connected}}/{{total}} connectées",cloudProfiles:"Profils Cloud",cloudProfilesDescription:"Préréglages de filament, imprimante et processus depuis Bambu Cloud",appSettings:"Paramètres de l'application",appSettingsDescription:"Configuration Bambuddy (base de données complète)",spoolInventory:"Inventaire des bobines",spoolInventoryDescription:"Bobines de filament, historique d'utilisation et suivi des coûts",printArchives:"Archives d'impression",printArchivesDescription:"Métadonnées de l'historique d'impression (pas de fichiers gcode/3MF)",lastBackupAt:"Dernière sauvegarde :",noBackupsYet:"Aucune sauvegarde pour l'instant",next:"Prochaine :",startingBackup:"Démarrage de la sauvegarde...",test:"Tester",enableBackup:"Activer la sauvegarde",testConnection:"Tester la connexion",enterRepoUrl:"Entrez l'URL du dépôt",enterRepoAndToken:"Entrez l'URL du dépôt et le jeton d'accès",repoRequired:"L'URL du dépôt est requise",tokenRequired:"Le jeton d'accès est requis",githubBackupEnabled:"Sauvegarde GitHub activée",tokenUpdated:"Jeton mis à jour",settingsSaved:"Paramètres enregistrés",failedToSave:"Échec de l'enregistrement : {{message}}",backupCompleteFiles:"Sauvegarde terminée - {{count}} fichiers mis à jour",backupSkippedNoChanges:"Sauvegarde ignorée - aucun changement",backupFailed2:"Échec de la sauvegarde : {{message}}",clearedLogs:"{{count}} journaux supprimés",failedToClearLogs:"Échec de la suppression des journaux : {{message}}",history:"Historique",clear:"Effacer",date:"Date",status:"Statut",commit:"Commit",localBackup:"Sauvegarde locale",localBackupDescription:"Créez une sauvegarde complète de vos données Bambuddy incluant la base de données, les archives, les téléchargements et tous les fichiers.",downloadBackupLabel:"Télécharger la sauvegarde",completeBackupZip:"Sauvegarde complète : base de données + tous les fichiers (ZIP)",download:"Télécharger",preparingBackup:"Préparation de la sauvegarde...",creatingArchive:"Création de l'archive de sauvegarde... Cela peut prendre un moment pour les archives volumineuses.",downloadingFile:"Téléchargement du fichier de sauvegarde...",backupDownloaded:"Sauvegarde téléchargée avec succès",failedToCreateBackup:"Échec de la création de la sauvegarde : {{message}}",restore:"Restaurer",restoreReplacesAll:"La restauration remplace toutes les données.",restoreReplacesAllDetail:"Votre base de données et vos fichiers actuels seront complètement remplacés. Un redémarrage est nécessaire après la restauration.",restoreConfirmTitle:"Restaurer la sauvegarde",restoreConfirmMessage:`Êtes-vous sûr de vouloir restaurer depuis "{{filename}}" ? Cela remplacera complètement votre base de données et tous vos fichiers. L'application devra être redémarrée après la restauration.`,restoreConfirmButton:"Restaurer la sauvegarde",uploadingFile:"Téléchargement du fichier de sauvegarde...",backupRestoredRestart:"Sauvegarde restaurée. Veuillez redémarrer Bambuddy.",failedToRestore:"Échec de la restauration. Veuillez vérifier le format du fichier.",reloadNow:"Recharger maintenant",creatingBackup:"Création de la sauvegarde",restoringBackup:"Restauration de la sauvegarde",preparing:"Préparation...",processing:"Traitement...",doNotClosePage:"Veuillez ne pas fermer cette page ni naviguer ailleurs. Cette opération peut prendre plusieurs minutes pour les sauvegardes volumineuses.",restoring:"Restauration...",restoreComplete:"Restauration terminée",restoreFailed2:"Échec de la restauration",importSettings:"Importer les paramètres depuis un fichier de sauvegarde",pleaseWaitRestoring:"Veuillez patienter pendant la restauration de vos données",selectBackupFile:"Cliquez pour sélectionner un fichier de sauvegarde (.json ou .zip)",duplicateHandling:"Comment fonctionne la gestion des doublons :",matchPrinters:"Imprimantes",matchPrintersBy:"correspondance par numéro de série",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"correspondance par adresse IP",matchNotificationProviders:"Fournisseurs de notifications",matchNotificationProvidersBy:"correspondance par nom",matchFilaments:"Filaments",matchFilamentsBy:"correspondance par nom + type + marque",matchArchives:"Archives",matchArchivesBy:"correspondance par hash de contenu (toujours ignoré)",matchPendingUploads:"Téléchargements en attente",matchPendingUploadsBy:"correspondance par nom de fichier",matchSettingsTemplates:"Paramètres et modèles",matchSettingsTemplatesBy:"toujours écrasés",replaceExisting:"Remplacer les données existantes",keepExisting:"Conserver les données existantes",overwriteDescription:"Écraser les éléments qui existent déjà avec les données de sauvegarde",keepDescription:"Restaurer uniquement les éléments qui n'existent pas encore",overwriteCaution:"Attention :",overwriteWarning:"L'écrasement remplacera vos configurations actuelles par les données de la sauvegarde. Les codes d'accès des imprimantes ne sont jamais écrasés pour des raisons de sécurité.",cancel:"Annuler",processingBackup:"Traitement du fichier de sauvegarde...",itemsRestored:"Éléments restaurés",itemsSkipped:"Éléments ignorés",restored:"Restaurés",skippedAlreadyExist:"Ignorés (existent déjà)",filesCategory:"Fichiers (3MF, miniatures, etc.)",andMore:"...et {{count}} de plus",newApiKeysGenerated:"Nouvelles clés API générées",keysShownOnce:"Ces clés ne sont affichées qu'une seule fois. Copiez-les maintenant !",copy:"Copier",noDataFound:"Aucune donnée à restaurer n'a été trouvée dans le fichier de sauvegarde.",close:"Fermer",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Paramètres",notification_providers:"Fournisseurs de notifications",notification_templates:"Modèles de notifications",smart_plugs:"Smart Plugs",printers:"Imprimantes",filaments:"Filaments",maintenance_types:"Types de maintenance",archives:"Archives",projects:"Projets",pending_uploads:"Téléchargements en attente",external_links:"Liens externes",api_keys:"Clés API"}},tags:{title:"Tags",addTag:"Ajouter Tag",editTag:"Modifier Tag",deleteTag:"Supprimer Tag",tagName:"Nom du Tag",tagColor:"Couleur du Tag",noTags:"Aucun tag",deleteConfirm:"Supprimer ce tag ?",manageTags:"Gérer les Tags"},uploadModal:{title:"Téléverser des fichiers 3MF",dragDrop:"Glissez les fichiers .3mf ici",or:"ou",browseFiles:"Parcourir",extractionInfo:"Le modèle d'imprimante est extrait des métadonnées 3MF.",uploaded:"téléversé",failed:"échoué",uploading:"En cours...",upload:"Téléverser",uploadFailed:"Échec du téléversement"},editArchive:{title:"Modifier l'archive",name:"Nom",namePlaceholder:"Nom de l'impression",printer:"Imprimante",noPrinter:"Aucune imprimante",project:"Projet",noProject:"Aucun projet",itemsPrinted:"Nombre de pièces",itemsPrintedHelp:"Nombre d'objets produits",notes:"Notes",notesPlaceholder:"Notes sur l'impression...",externalLink:"Lien externe",externalLinkPlaceholder:"https://...",externalLinkHelp:"Lien vers Printables, Thingiverse, etc.",tags:"Tags",tagsPlaceholder:"Ajouter des tags...",addMoreTags:"Plus de tags...",matchingTags:'Correspondant à "{{query}}"',existingTags:"Tags existants",clickToAdd:"(cliquer pour ajouter)",status:"Statut",failureReason:"Raison de l'échec",selectReason:"Choisir raison...",photos:"Photos du résultat",photosHelp:"Cliquez sur + pour ajouter des photos",printResult:"Résultat d'impression",saving:"Enregistrement...",failureReasons:{adhesionFailure:"Défaut d'adhésion",spaghettiDetached:"Spaghetti / Détaché",layerShift:"Décalage de couche",cloggedNozzle:"Buse bouchée",filamentRunout:"Filament fini",warping:"Warping (Déformation)",stringing:"Stringing (Cheveux d'ange)",underExtrusion:"Sous-extrusion",powerFailure:"Coupure courant",userCancelled:"Annulé par l'utilisateur",other:"Autre"},statuses:{completed:"Réussie",failed:"Échouée",aborted:"Annulée",printing:"Impression"}},kProfiles:{title:"K-Profiles",noPrintersConfigured:"Aucune imprimante configurée",addPrinterInSettings:"Ajoutez une imprimante pour gérer les K-profiles",noActivePrinters:"Aucune imprimante active",enablePrinterConnection:"Activez la connexion pour voir les K-profiles",loadingProfiles:"Chargement des K-Profiles...",printerOffline:"Imprimante hors ligne",printerOfflineDesc:"L'imprimante doit être allumée.",noMatchingProfiles:"Aucun profil correspondant",noMatchingProfilesDesc:"Ajustez votre recherche",noKProfiles:"Aucun K-Profile",noKProfilesDesc:"Aucun profil trouvé pour une buse de {{diameter}}mm",createFirstProfile:"Créer le premier profil",printer:"Imprimante",nozzle:"Buse",refresh:"Rafraîchir",addProfile:"Ajouter Profil",export:"Exporter",import:"Importer",select:"Choisir",selectAll:"Tout sélectionner",delete:"Supprimer",searchPlaceholder:"Nom ou filament...",allExtruders:"Tous les extrudeurs",leftOnly:"Gauche uniquement",rightOnly:"Droite uniquement",allFlow:"Tout débit",hfOnly:"HF uniquement",sOnly:"S uniquement",sortName:"Tri : Nom",sortKValue:"Tri : Valeur K",sortFilament:"Tri : Filament",leftExtruder:"Extrudeur gauche",rightExtruder:"Extrudeur droit",modal:{addTitle:"Ajouter K-Profile",editTitle:"Modifier K-Profile",profileName:"Nom du profil",profileNamePlaceholder:"ex: Mon profil PLA",kValue:"Valeur K",kValuePlaceholder:"0.020",kValueHelp:"Plage type : 0.01-0.06 (PLA), 0.02-0.10 (PETG)",filament:"Filament",selectFilament:"Choisir filament...",noFilamentsHelp:"Créez d'abord un profil dans Bambu Studio.",flowType:"Type de débit",highFlow:"Haut Débit (HF)",standard:"Standard",nozzleSize:"Taille buse",extruder:"Extrudeur",extruders:"Extrudeurs",left:"Gauche",right:"Droite",notes:"Notes (locales)",notesPlaceholder:"Notes sur ce profil...",notesHelp:"Enregistré dans Bambuddy, pas sur l'imprimante",syncing:"Sync avec l'imprimante...",savingExtruder:"Sauvegarde extrudeur {{current}}/{{total}}...",pleaseWait:"Patientez..."},deleteConfirm:{title:"Supprimer profil",cannotUndo:"Action irréversible",message:`Supprimer "{{name}}" de l'imprimante ?`},bulkDelete:{title:"Supprimer les profils",cannotUndo:"Action irréversible",message:"Supprimer les {{count}} profils de l'imprimante ?"},toast:{profileSaved:"Profil K enregistré",profilesSaved:"Profil K enregistré sur {{count}} extrudeur(s)",selectAtLeastOneExtruder:"Sélectionnez un extrudeur",profileDeleted:"Profil K supprimé",profilesDeleted:"{{count}} profils supprimés",exportedProfiles:"{{count}} profils exportés",importedProfiles:"{{count}} sur {{total}} profils importés",noProfilesToExport:"Rien à exporter",invalidFileFormat:"Format invalide",failedToParseImport:"Échec analyse fichier",failedToSaveBatch:"Échec enregistrement groupé",noteSaved:"Note enregistrée",failedToSaveNote:"Échec note"},permission:{noRead:"Pas d'autorisation lecture",noCreate:"Pas d'autorisation création",noUpdate:"Pas d'autorisation mise à jour",noDelete:"Pas d'autorisation suppression",noExport:"Pas d'autorisation export",noImport:"Pas d'autorisation import"}},virtualPrinter:{title:"Imprimante Virtuelle",running:"En cours",stopped:"Arrêtée",description:{default:"Active une imprimante qui apparaît dans Bambu Studio. Les fichiers envoyés sont archivés sans impression.",proxy:"Active un proxy qui relaie le trafic vers une imprimante réelle, permettant l'impression à distance."},enable:{title:"Activer l'imprimante virtuelle",visibleInSlicer:'Visible comme "Bambuddy" dans le Slicer',proxyingTo:"Proxy vers {{name}}",notActive:"Inactive"},model:{title:"Modèle d'imprimante",description:"Choisissez le modèle à émuler.",restartWarning:"Changer le modèle redémarrera le service"},accessCode:{title:"Code d'accès",isSet:"Code défini",notSet:"Code requis pour activer",placeholder:"Code 8 char",placeholderChange:"Entrez nouveau code",hint:"Exactement 8 caractères. Sert à l'auth du Slicer.",charCount:"({{count}}/8)"},targetPrinter:{title:"Imprimante cible",configured:"Cible configurée",notConfigured:"Imprimante requise pour mode Proxy",placeholder:"Choisir imprimante...",hint:"L'imprimante doit être en mode LAN.",noPrinters:"Ajoutez une imprimante réelle d'abord."},remoteInterface:{title:"Exception Interface Réseau",configured:"Override actif",optional:"Optionnel - si IP auto est fausse (VPN, Docker, multi-NIC).",placeholder:"Auto (défaut)...",hint:"Force l'IP annoncée via SSDP."},mode:{title:"Mode",archive:"Archiver",archiveDesc:"Archive immédiatement",review:"Revue",reviewDesc:"Attendre revue avant archive",queue:"File",queueDesc:"Archiver et ajouter à la file",proxy:"Proxy",proxyDesc:"Relais vers imprimante réelle"},autoDispatch:{title:"Lancement automatique",description:"Lancer automatiquement les impressions ajoutées à la file. Désactivé, les impressions attendent un lancement manuel."},tailscaleDisabled:{title:"Intégration Tailscale",description:"Lorsqu'activé, utilise Tailscale pour des certificats TLS de confiance. Désactiver pour n'utiliser que des certificats auto-signés."},setupRequired:{title:"Configuration requise",description:"Nécessite des réglages système (ports, pare-feu).",readGuide:"Lire le guide de configuration"},howItWorks:{title:"Fonctionnement",step1:"Sur le même LAN, les imprimantes virtuelles apparaissent automatiquement dans votre slicer (Bambu Studio / OrcaSlicer). Depuis d'autres réseaux, ajoutez-les manuellement par adresse IP et code d'accès.",step2:`En mode Archive, Revue et File d'attente, utilisez le bouton "Envoyer" dans votre slicer pour envoyer des fichiers 3MF à Bambuddy. Le slicer affichera "Impression réussie" — le fichier est stocké, pas imprimé.`,step3:"En mode Proxy, l'imprimante virtuelle relaie tout le trafic vers une vraie imprimante — les impressions démarrent immédiatement comme en connexion directe."},status:{title:"Détails du statut",printerName:"Nom",model:"Modèle",serialNumber:"Série",mode:"Mode",pendingFiles:"Fichiers en attente",targetPrinter:"Cible",ftpPort:"Port FTP",mqttPort:"Port MQTT",ftpConnections:"Connexions FTP",mqttConnections:"Connexions MQTT"},toast:{updated:"Réglages virtuels mis à jour",failedToUpdate:"Échec mise à jour",tailscaleNotAvailable:"Tailscale n'est pas installé sur cet hôte. Installez Tailscale puis réessayez.",copyFailed:"Échec de la copie — veuillez sélectionner le texte manuellement",accessCodeRequired:"Code d'accès requis",targetPrinterRequired:"Imprimante cible requise",bindIpRequired:"Veuillez d'abord définir une adresse IP",accessCodeEmpty:"Le code ne peut pas être vide",accessCodeLength:"Le code doit faire 8 caractères",created:"Imprimante virtuelle créée",failedToCreate:"Échec de la création de l'imprimante virtuelle",deleted:"Imprimante virtuelle supprimée",failedToDelete:"Échec de la suppression de l'imprimante virtuelle"},list:{title:"Imprimantes virtuelles",add:"Ajouter",addFirst:"Ajouter une imprimante virtuelle",empty:"Aucune imprimante virtuelle configurée. Ajoutez-en une pour commencer."},bindIp:{title:"Interface réseau",placeholder:"Sélectionner interface...",hint:"Interface réseau sur laquelle cette imprimante virtuelle écoute. Doit être unique par imprimante."},proxy:{accessCodeHint:"En mode proxy, utilisez le code d'accès de l'imprimante cible dans le slicer. La connexion est transmise de manière transparente à l'imprimante réelle."},addDialog:{title:"Ajouter une imprimante virtuelle",name:"Nom",hint:"Vous pourrez configurer le code d'accès, l'imprimante cible et d'autres paramètres après la création.",create:"Créer"},deleteConfirm:{title:"Supprimer l'imprimante virtuelle",message:'Êtes-vous sûr de vouloir supprimer "{{name}}" ? Cela arrêtera tous les services de cette imprimante.'},archiveNameSource:{title:"Source du nom d'archive",description:`Choisissez comment les nouvelles archives sont nommées lorsque les fichiers arrivent via l'imprimante virtuelle. "Métadonnées" utilise le titre intégré par le slicer dans le 3MF (par défaut). "Nom de fichier" utilise le nom envoyé par Bambu Studio en FTP — pratique si vous avez renommé le job dans la boîte "envoyer à l'imprimante".`,metadata:"Métadonnées",filename:"Nom de fichier"}},modelViewer:{openInSlicer:"Ouvrir dans le Slicer",tabs:{model:"Modèle 3D",gcode:"Aperçu G-code"},notAvailable:"indisponible",notSliced:"pas découpé",plates:"Plateaux",allPlates:"Tous les plateaux",plateNumber:"Plateau {{number}}",plateCount:"{{count}} plateau",plateCount_other:"{{count}} plateaux",objectCount:"{{count}} objet",objectCount_other:"{{count}} objets",filamentCount:"{{count}} filament",filamentCount_other:"{{count}} filaments",eta:"Fin {{minutes}} min",noPreview:"Aucun aperçu pour ce fichier",pagination:{pageOf:"Page {{current}} sur {{total}}",prev:"Préc",next:"Suiv"},errors:{failedToLoad:"Échec chargement fichier",noMeshes:"Aucun maillage trouvé dans le 3MF",unsupportedFormat:"Format non supporté"}},maintenanceDescriptions:{lubricateCarbonRods:"Appliquer du lubrifiant sur les tiges carbone pour un mouvement fluide",lubricateRails:"Appliquer du lubrifiant sur les rails linéaires",cleanNozzle:"Nettoyer buse et hotend anti-bouchage",checkBelts:"Tension des courroies pour la précision",cleanBuildPlate:"Nettoyage plateau pour l'adhésion",checkExtruder:"Usure des engrenages de l'extrudeur",checkCooling:"Bon fonctionnement des ventilateurs",generalInspection:"Inspection générale de la machine",cleanCarbonRods:"Nettoyer les tiges carbone (friction)",lubricateSteelRods:"Appliquer du lubrifiant sur les tiges en acier pour un mouvement fluide",cleanSteelRods:"Nettoyer les tiges en acier (friction)",cleanLinearRails:"Essuyer les rails linéaires (poussière/débris)",checkPtfeTube:"Usure ou dommage du tube PTFE",replaceHepaFilter:"Filtre HEPA pour la qualité de l'air",replaceCarbonFilter:"Filtre charbon actif (odeurs)",lubricateLeftNozzleRail:"Lubrifier le rail de buse gauche (Série H2)"},smartPlugs:{offline:"Hors ligne",admin:"Admin",openPlugAdminPage:"Page admin de la prise",deleteSmartPlug:"Supprimer la prise",turnOnSmartPlug:"Allumer la prise",turnOffSmartPlug:"Éteindre la prise",turnOn:"Allumer",turnOff:"Éteindre",addSmartPlug:{scanningNetwork:"Scan réseau...",chooseEntity:"Choisir une entité...",connectionFailed:"Échec connexion",searchEntities:"Chercher entités...",searchPowerSensors:"Capteurs puissance...",searchEnergySensors:"Capteurs énergie...",placeholders:{plugName:"Prise Salon",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Identique au topic puissance, ou différent"}},linkedTo:"Lié à :",monitorOnly:"Surveillance uniquement",alerts:"Alertes",scheduleOn:"On {{time}}",scheduleOff:"Off {{time}}",on:"On",off:"Off",power:"Puissance",kwhToday:"kWh Aujourd'hui",settings:"Paramètres",automationSettings:"Paramètres d'automatisation",showInSwitchbar:"Afficher dans la barre de commutateurs",quickAccessSidebar:"Accès rapide depuis la barre latérale",enabled:"Activé",enableAutomation:"Activer l'automatisation pour cette prise",autoOn:"Auto On",autoOnDescription:"Allumer au démarrage de l'impression",autoOff:"Auto Off",autoOffDescription:"Éteindre à la fin de l'impression (unique)",autoOffPersistent:"Garder activé",autoOffPersistentDescription:"Rester activé entre les impressions au lieu d'une seule fois",turnOffDelayMode:"Mode de délai d'extinction",time:"Temps",temp:"Temp",delayMinutes:"Délai (minutes)",tempThreshold:"Seuil de température (°C)",tempThresholdDescription:"S'éteint lorsque la buse refroidit en dessous de cette température",edit:"Modifier",deleteConfirm:'Êtes-vous sûr de vouloir supprimer "{{name}}" ? Cette action est irréversible.',turnOnConfirm:'Êtes-vous sûr de vouloir allumer "{{name}}" ?',turnOffConfirm:`Êtes-vous sûr de vouloir éteindre "{{name}}" ? Cela coupera l'alimentation de l'appareil connecté.`,failedToTurn:'Impossible de {{action}} "{{name}}"',unknown:"Inconnu",addTitle:"Ajouter une prise connectée",editTitle:"Modifier la prise connectée",stopScanning:"Arrêter le scan",discoverTasmota:"Découvrir les appareils Tasmota",foundDevices:"{{count}} appareil(s) trouvé(s) - cliquez pour sélectionner :",noDevicesFound:"Aucun appareil Tasmota trouvé sur votre réseau",haNotConfigured:"Home Assistant n'est pas configuré. Configurez-le dans",haSettingsPath:"Paramètres → Réseau → Home Assistant",selectEntity:"Sélectionner l'entité *",ipAddress:"Adresse IP *",nameLabel:"Nom *",username:"Nom d'utilisateur",password:"Mot de passe",authHint:"Laissez vide si votre appareil Tasmota ne nécessite pas d'authentification",linkToPrinter:"Lier à l'imprimante",noPrinter:"Pas d'imprimante (contrôle manuel uniquement)",linkingDescription:"La liaison permet l'allumage/extinction automatique au début/fin de l'impression",powerAlerts:"Alertes de puissance",alertAbove:"Alerte si au-dessus (W)",alertBelow:"Alerte si en dessous (W)",alertDescription:"Recevoir une notification lorsque la consommation dépasse ces seuils. Laisser vide pour désactiver cette direction.",dailySchedule:"Planification quotidienne",turnOnAt:"Allumer à",turnOffAt:"Éteindre à",scheduleDescription:"Allumer/éteindre automatiquement la prise à ces heures chaque jour. Laisser vide pour ignorer cette action.",showOnPrinterCard:"Afficher sur la carte imprimante",displayOnPrinterCard:"Afficher le bouton sur la carte imprimante",connectedResult:"Connecté !",deviceLabel:"Appareil : {{name}} - ",stateLabel:"État : {{state}}",test:"Tester",delete:"Supprimer",save:"Enregistrer",add:"Ajouter",cancel:"Annuler",failedToStartScan:"Impossible de démarrer le scan",nameRequired:"Le nom est requis",entityRequired:"L'entité est requise pour les prises Home Assistant",mqttTopicRequired:"Au moins un topic MQTT doit être configuré pour la puissance, l'énergie ou la surveillance d'état",loadingEntities:"Chargement des entités...",loading:"Chargement...",failedToLoadEntities:"Échec du chargement des entités : {{error}}",noEntitiesMatching:'Aucune entité trouvée correspondant à "{{search}}"',noEntitiesAvailable:"Aucune entité disponible",searchingEntities:"Recherche de toutes les entités ({{count}} trouvées)",showingEntities:"Affichage switch, light, input_boolean ({{count}} disponibles)",energyMonitoringOptional:"Surveillance énergétique (Optionnel)",energyMonitoringHint:"Recherchez et sélectionnez les capteurs fournissant des données de puissance/énergie.",powerSensorW:"Capteur de puissance (W)",energyTodayKwh:"Énergie aujourd'hui (kWh)",totalEnergyKwh:"Énergie totale (kWh)",noMatchingSensors:"Aucun capteur correspondant",none:"Aucun",mqttNotConfigured:"Broker MQTT non configuré. Définissez l'adresse du broker dans",mqttSettingsPath:"Paramètres → Réseau → Publication MQTT",mqttNotConfiguredSuffix:"(vous n'avez pas besoin d'activer la publication, remplissez simplement les détails du broker).",mqttMonitorOnlyDescription:"Les prises MQTT reçoivent les données de puissance/énergie via un abonnement MQTT. Le contrôle on/off n'est pas disponible - utilisez votre broker MQTT ou système domotique.",powerMonitoring:"Surveillance de puissance",energyMonitoring:"Surveillance énergétique",stateMonitoring:"Surveillance d'état",optional:"optionnel",topic:"Topic",jsonPath:"Chemin JSON",multiplier:"Multiplicateur",onValue:"Valeur ON",mqttPowerHint:`Le chemin JSON extrait la valeur du payload JSON (ex: "power_l1"). Laisser vide si le topic publie des valeurs numériques brutes.
+EIN-Wert: der genaue String der "EIN" bedeutet. Leer lassen für Auto-Erkennung (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"Power URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"Power Multiplikator",restEnergyUrl:"Energie URL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Energie Multiplikator",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"Eigene URL für Leistungsdaten (nutzt Status URL wenn leer)",restEnergyUrlHint:"Eigene URL für Energiedaten (nutzt Status URL wenn leer)",restEnergyHint:"Jeder Wert kann eine eigene URL verwenden oder auf die Status URL zurückgreifen. Multiplikatoren für Einheitenumrechnung verwenden (z.B. 0.001 für Wh zu kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"Keine Schalter in der Schaltleiste",enableSwitchbarHint:'"In Schaltleiste anzeigen" unter Einstellungen > Smart Plugs aktivieren'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-Mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP-E-Mail-Benachrichtigungen",telegram:"Benachrichtigungen über Telegram-Bot",discord:"An Discord-Kanal per Webhook senden",ntfy:"Kostenlose, selbst-hostbare Push-Benachrichtigungen",pushover:"Einfache, zuverlässige Push-Benachrichtigungen",callmebot:"Kostenlose WhatsApp-Benachrichtigungen über CallMeBot",webhook:"Generischer HTTP-POST an beliebige URL",homeassistant:"Dauerhafte Benachrichtigungen im Home Assistant Dashboard"},lastSuccess:"Zuletzt: {{date}}",error:"Fehler",printer:"Drucker:",allPrinters:"Alle Drucker",sendTestNotification:"Testbenachrichtigung senden",eventSettings:"Ereigniseinstellungen",enabled:"Aktiviert",sendFromProvider:"Benachrichtigungen von diesem Anbieter senden",printEvents:"Druckereignisse",printerStatus:"Druckerstatus",amsAlarms:"AMS-Alarme",amsHtAlarms:"AMS-HT-Alarme",printQueue:"Druckwarteschlange",start:"Start",plateCheck:"Plattenkontrolle",complete:"Abgeschlossen",failed:"Fehlgeschlagen",stopped:"Gestoppt",progress:"Fortschritt",offline:"Offline",lowFilament:"Filament niedrig",maintenance:"Wartung",amsHumidity:"AMS-Feuchtigkeit",amsTemp:"AMS-Temperatur",amsHtHumidity:"AMS-HT-Feuchtigkeit",amsHtTemp:"AMS-HT-Temperatur",bedCooled:"Bett abgekühlt",firstLayer:"Erste Schicht",quiet:"Ruhe",digest:"Zusammenfassung {{time}}",printStarted:"Druck gestartet",plateNotEmpty:"Platte nicht leer",plateNotEmptyDescription:"Objekte vor dem Druck erkannt",printCompleted:"Druck abgeschlossen",bedCooledLabel:"Bett abgekühlt",bedCooledDescription:"Bett nach dem Druck unter Schwellenwert abgekühlt",firstLayerCompleteLabel:"Erste Schicht fertig",firstLayerCompleteDescription:"Benachrichtigung mit Foto nach erster Schicht",missingSpoolAssignmentLabel:"Fehlende Spulenzuordnung",missingSpoolAssignmentDescription:"Benachrichtigen, wenn ein Druck startet und benoetigte Schaechte keine zugeordnete Spule haben",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",progressMilestones:"Fortschrittsmeilensteine",progressMilestonesDescription:"Benachrichtigung bei 25%, 50%, 75%",printerOffline:"Drucker offline",printerError:"Druckerfehler",lowFilamentLabel:"Filament niedrig",maintenanceDue:"Wartung fällig",maintenanceDueDescription:"Benachrichtigen, wenn Wartung erforderlich ist",amsHumidityHigh:"AMS-Feuchtigkeit hoch",amsHumidityHighDescription:"Normale AMS-Feuchtigkeit überschreitet Schwellenwert",amsTemperatureHigh:"AMS-Temperatur hoch",amsTemperatureHighDescription:"Normale AMS-Temperatur überschreitet Schwellenwert",amsHtHumidityHigh:"AMS-HT-Feuchtigkeit hoch",amsHtHumidityHighDescription:"AMS-HT-Feuchtigkeit überschreitet Schwellenwert",amsHtTemperatureHigh:"AMS-HT-Temperatur hoch",amsHtTemperatureHighDescription:"AMS-HT-Temperatur überschreitet Schwellenwert",jobAdded:"Auftrag hinzugefügt",jobAddedDescription:"Auftrag zur Warteschlange hinzugefügt",jobAssigned:"Auftrag zugewiesen",jobAssignedDescription:"Modellbasierter Auftrag einem Drucker zugewiesen",jobStarted:"Auftrag gestartet",jobStartedDescription:"Warteschlangenauftrag hat Druck begonnen",jobWaiting:"Auftrag wartet",jobWaitingDescription:"Auftrag wartet auf Filament oder Drucker",jobSkipped:"Auftrag übersprungen",jobSkippedDescription:"Auftrag übersprungen (vorheriger fehlgeschlagen)",jobFailed:"Auftrag fehlgeschlagen",jobFailedDescription:"Auftrag konnte nicht gestartet werden",queueComplete:"Warteschlange abgeschlossen",queueCompleteDescription:"Alle Warteschlangenaufträge beendet",quietHours:"Ruhezeiten",noNotificationsDuring:"Keine Benachrichtigungen während dieser Zeiten",editProviderToChangeQuietHours:"Anbieter bearbeiten, um Ruhezeiten zu ändern",dailyDigest:"Tägliche Zusammenfassung",batchNotifications:"Benachrichtigungen zu einer täglichen Zusammenfassung bündeln",sendAt:"Senden um {{time}}",editProviderToChangeDigestTime:"Anbieter bearbeiten, um Zusammenfassungszeit zu ändern",edit:"Bearbeiten",deleteProvider:"Benachrichtigungsanbieter löschen",deleteConfirm:'Sind Sie sicher, dass Sie "{{name}}" löschen möchten? Dies kann nicht rückgängig gemacht werden.',delete:"Löschen",addTitle:"Benachrichtigungsanbieter hinzufügen",editTitle:"Benachrichtigungsanbieter bearbeiten",nameLabel:"Name *",namePlaceholder:"Meine Benachrichtigungen",providerTypeLabel:"Anbietertyp *",configuration:"Konfiguration",testConfiguration:"Konfiguration testen",printerFilter:"Druckerfilter",onlyFromPrinter:"Nur Benachrichtigungen für Ereignisse von diesem Drucker senden",quietHoursDnd:"Ruhezeiten (Nicht stören)",quietStart:"Start",quietEnd:"Ende",dailyDigestLabel:"Tägliche Zusammenfassung",sendDigestAt:"Zusammenfassung senden um",digestCollected:"Ereignisse werden gesammelt und als einzelne Zusammenfassung zu dieser Zeit gesendet",notificationEvents:"Benachrichtigungsereignisse",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(nach Druckabschluss)",eventPriority:{sectionTitle:"ntfy-Priorität",helpNtfy:"Wähle eine Priorität pro aktiviertem Ereignis. ntfy nutzt diese, um Hinweise (Ton, Sichtbarkeit, Push-Verhalten) zu eskalieren. Hier nicht gesetzte Stufen verwenden den ntfy-Server-Standard.",min:"Min",low:"Niedrig",default:"Standard",high:"Hoch",urgent:"Dringend"},cancel:"Abbrechen",save:"Speichern",add:"Hinzufügen",nameRequired:"Name ist erforderlich",fieldRequired:"{{field}} ist erforderlich",phoneNumber:"Telefonnummer",apiKey:"API-Schlüssel",serverUrl:"Server-URL",topic:"Thema",authToken:"Auth-Token",userKey:"Benutzerschlüssel",appToken:"App-Token",priority:"Priorität",botToken:"Bot-Token",chatId:"Chat-ID",smtpServer:"SMTP-Server",smtpPort:"SMTP-Port",security:"Sicherheit",authentication:"Authentifizierung",username:"Benutzername",password:"Passwort",fromEmail:"Absender-E-Mail",toEmail:"Empfänger-E-Mail",webhookUrl:"Webhook-URL",payloadFormat:"Payload-Format",authorization:"Autorisierung",titleFieldName:"Titel-Feldname",messageFieldName:"Nachrichten-Feldname",editTemplate:"Vorlage bearbeiten: {{name}}",titleLabel:"Titel",bodyLabel:"Inhalt",titlePlaceholder:"Benachrichtigungstitel...",bodyPlaceholder:"Benachrichtigungsinhalt...",availableVariables:"Verfügbare Variablen",clickToInsert:"Klicken, um an Cursorposition im Inhalt einzufügen",livePreview:"Live-Vorschau",hide:"Ausblenden",show:"Anzeigen",loadingPreview:"Vorschau wird geladen...",enterTemplateContent:"Vorlageninhalt eingeben, um Vorschau zu sehen",titlePreview:"Titel:",bodyPreview:"Inhalt:",resetToDefault:"Auf Standard zurücksetzen",titleRequired:"Titel ist erforderlich",bodyRequired:"Inhalt ist erforderlich",notificationLog:"Benachrichtigungsprotokoll",showFailedOnly:"Nur fehlgeschlagene",last24Hours:"Letzte 24 Stunden",last7Days:"Letzte 7 Tage",last30Days:"Letzte 30 Tage",last90Days:"Letzte 90 Tage",justNow:"Gerade eben",noFailedNotifications:"Keine fehlgeschlagenen Benachrichtigungen",noNotificationsLogged:"Keine Benachrichtigungen protokolliert",unknownProvider:"Unbekannter Anbieter",logTitle:"Titel",logMessage:"Nachricht",logError:"Fehler",logProvider:"Anbieter: {{type}}",logTime:"Zeit: {{time}}",refresh:"Aktualisieren",clearOld:"Alte löschen",statsSummary:"Letzte {{days}} Tage:",statsNotifications:"Benachrichtigungen",statsSent:"{{count}} gesendet",statsFailed:"{{count}} fehlgeschlagen",eventTypes:{print_start:"Druck gestartet",print_complete:"Druck abgeschlossen",print_failed:"Druck fehlgeschlagen",print_stopped:"Druck gestoppt",print_progress:"Fortschritt",printer_offline:"Drucker offline",printer_error:"Druckerfehler",filament_low:"Filament niedrig",maintenance_due:"Wartung fällig",test:"Test"},userEmail:{title:"Benachrichtigungen",emailNotifications:"E-Mail-Benachrichtigungen",emailNotificationsDesc:"Erhalten Sie E-Mail-Benachrichtigungen für Ihre eigenen Druckaufträge. E-Mails werden über die in der erweiterten Authentifizierung konfigurierten SMTP-Einstellungen gesendet.",sendingTo:"Benachrichtigungen werden gesendet an",noEmailWarning:"Ihr Konto hat keine E-Mail-Adresse. Wenden Sie sich an einen Administrator, um eine hinzuzufügen.",printJobNotifications:"Druckauftrags-Benachrichtigungen",printJobNotificationsDesc:"Wählen Sie aus, welche Ereignisse E-Mail-Benachrichtigungen für von Ihnen gesendete Druckaufträge auslösen.",printJobStarts:"Druckauftrag startet",printJobStartsDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag beginnt.",printJobFinishes:"Druckauftrag fertig",printJobFinishesDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag erfolgreich abgeschlossen wurde.",printErrors:"Druckfehler",printErrorsDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag fehlschlägt oder auf einen Fehler stößt.",printJobStops:"Druckauftrag gestoppt",printJobStopsDesc:"Benachrichtigt werden, wenn Ihr Druckauftrag abgebrochen oder gestoppt wird.",saveSuccess:"Benachrichtigungseinstellungen gespeichert.",saveError:"Benachrichtigungseinstellungen konnten nicht gespeichert werden."}},richTextEditor:{bold:"Fett",italic:"Kursiv",underline:"Unterstrichen",bulletList:"Aufzählungsliste",numberedList:"Nummerierte Liste",alignLeft:"Linksbündig",alignCenter:"Zentriert",alignRight:"Rechtsbündig",addLink:"Link hinzufügen",removeLink:"Link entfernen"},externalLinks:{noLinksConfigured:"Keine externen Links konfiguriert",deleteLink:"Link löschen",removeCustomIcon:"Benutzerdefiniertes Symbol entfernen",openInNewTab:"In neuem Tab öffnen",placeholders:{linkName:"Mein Link"}},keyboardShortcuts:{title:"Tastaturkürzel",navigation:"Navigation",archivesSection:"Archive",kProfilesSection:"K-Profile",generalSection:"Allgemein",shortcuts:{goToPrinters:"Zu Drucker gehen",goToArchives:"Zu Archiv gehen",goToQueue:"Zur Warteschlange gehen",goToStats:"Zu Statistiken gehen",goToProfiles:"Zu Cloud-Profilen gehen",goToSettings:"Zu Einstellungen gehen",focusSearch:"Suche fokussieren",openUploadModal:"Upload-Modal öffnen",clearSelection:"Auswahl löschen / Eingabe aufheben",contextMenu:"Kontextmenü auf Karten",refreshProfiles:"Profile aktualisieren",newProfile:"Neues Profil",exitSelectionMode:"Auswahlmodus beenden",showHelp:"Diese Hilfe anzeigen"},footer:"Drücken Sie Esc oder klicken Sie außerhalb, um zu schließen"},notificationLog:{title:"Benachrichtigungsprotokoll",events:{printStarted:"Druck gestartet",printComplete:"Druck abgeschlossen",printFailed:"Druck fehlgeschlagen",printStopped:"Druck gestoppt",progress:"Fortschritt",printerOffline:"Drucker offline",printerError:"Druckerfehler",lowFilament:"Wenig Filament",maintenanceDue:"Wartung fällig",test:"Test"},timeAgo:{justNow:"Gerade eben",minutesAgo:"vor {{minutes}}m",hoursAgo:"vor {{hours}}h"}},restoreBackup:{title:"Backup wiederherstellen",restoring:"Wird wiederhergestellt...",restoreComplete:"Wiederherstellung abgeschlossen",restoreFailed:"Wiederherstellung fehlgeschlagen",importSettings:"Einstellungen aus Backup-Datei importieren",pleaseWait:"Bitte warten Sie, während Ihre Daten wiederhergestellt werden",clickToSelect:"Klicken Sie, um Backup-Datei auszuwählen (.json oder .zip)",howDuplicateHandling:"So funktioniert die Duplikatbehandlung:",categories:{printers:"Drucker",smartPlugs:"Smart Plugs",notificationProviders:"Benachrichtigungsanbieter",filaments:"Filamente",archives:"Archive",pendingUploads:"Ausstehende Uploads",settingsTemplates:"Einstellungen & Vorlagen"},matchingInfo:{printers:"abgeglichen nach Seriennummer",smartPlugs:"abgeglichen nach IP-Adresse",notificationProviders:"abgeglichen nach Name",filaments:"abgeglichen nach Name + Typ + Marke",archives:"abgeglichen nach Inhalts-Hash",pendingUploads:"abgeglichen nach Dateiname",settingsTemplates:"immer überschrieben"},replaceExisting:"Vorhandene Daten ersetzen",keepExisting:"Vorhandene Daten behalten",replaceDescription:"Bereits vorhandene Elemente mit Backup-Daten überschreiben",keepDescription:"Nur Elemente wiederherstellen, die noch nicht existieren",caution:"Vorsicht:",cautionText:"Das Überschreiben ersetzt Ihre aktuellen Konfigurationen durch Backup-Daten. Drucker-Zugangscodes werden aus Sicherheitsgründen niemals überschrieben.",itemsRestored:"Wiederhergestellte Elemente",itemsSkipped:"Übersprungene Elemente",restored:"Wiederhergestellt",skipped:"Übersprungen (existieren bereits)",filesLabel:"Dateien (3MF, Thumbnails, etc.)",newApiKeysGenerated:"Neue API-Schlüssel generiert",newApiKeysWarning:"Diese Schlüssel werden nur einmal angezeigt. Kopieren Sie sie jetzt!",processingBackup:"Backup-Datei wird verarbeitet...",noDataFound:"In der Backup-Datei wurden keine wiederherzustellenden Daten gefunden.",failedToRestore:"Backup konnte nicht wiederhergestellt werden. Bitte überprüfen Sie das Dateiformat."},backupExport:{title:"Backup exportieren",selectData:"Zu exportierende Daten auswählen",selectAll:"Alle auswählen",selectNone:"Keine auswählen",categoryDescriptions:{settings:"Sprache, Theme, Update-Einstellungen",notifications:"ntfy, Pushover, Discord, usw.",templates:"Benutzerdefinierte Nachrichtenvorlagen",smartPlugs:"Tasmota-Plug-Konfigurationen",externalLinks:"Seitenleiste Links zu externen Diensten",printers:"Druckerinformationen (Zugangscodes ausgeschlossen)",plateDetection:"Leere Platten-Referenzbilder",filaments:"Filamenttypen und -kosten",maintenance:"Benutzerdefinierte Wartungspläne",archives:"Alle Druckdaten + Dateien (3MF, Thumbnails, Fotos)",projects:"Projekte, BOM-Elemente und Anhänge",pendingUploads:"Virtueller Drucker-Uploads zur Überprüfung",apiKeys:"Webhook-API-Schlüssel (neue Schlüssel bei Import generiert)"},requiresPrinters:"Drucker müssen ausgewählt sein",zipFileWarning:"ZIP-Datei wird erstellt.",zipFileDescription:"Enthält alle 3MF-Dateien, Thumbnails, Zeitraffer und Fotos. Dies kann eine Weile dauern und zu einer großen Datei führen.",includeAccessCodes:"Zugangscodes einschließen",includeAccessCodesDescription:"Für die Übertragung auf eine andere Maschine",includeAccessCodesWarning:"Zugangscodes werden im Klartext eingeschlossen. Bewahren Sie diese Backup-Datei sicher auf!",categoriesSelected:"{{selectedCount}} Kategorien ausgewählt"},pendingUploads:{placeholders:{notes:"Notizen zu diesem Druck hinzufügen..."},discardUpload:"Upload verwerfen",archiveAllUploads:"Alle Uploads archivieren",discardAllUploads:"Alle Uploads verwerfen",archive:"Archivieren",timeAgo:{justNow:"Gerade eben",minutesAgo:"vor {{minutes}}m",hoursAgo:"vor {{hours}}h",daysAgo:"vor {{days}}d"}},apiBrowser:{placeholders:{requestBody:"JSON-Anforderungstext...",searchEndpoints:"Endpunkte suchen..."}},configureAmsSlot:{title:"AMS-Slot konfigurieren",slotConfigured:"Slot konfiguriert!",configuringSlot:"Slot wird konfiguriert:",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Voreinstellungen suchen...",colorPlaceholder:"Farbname oder Hex (z.B. braun, FF8800)",clearCustomColor:"Benutzerdefinierte Farbe löschen",noCloudPresets:"Keine Cloud-Voreinstellungen. Melden Sie sich bei Bambu Cloud an, um zu synchronisieren.",noPresetsAvailable:"Keine Voreinstellungen verfügbar. Melden Sie sich bei Bambu Cloud an oder importieren Sie lokale Profile.",noMatchingPresets:"Keine passenden Voreinstellungen gefunden.",custom:"Benutzerdefiniert",builtin:"Integriert",settingsSentToPrinter:"Einstellungen an Drucker gesendet",filamentProfile:"Filamentprofil",kProfileLabel:"K-Profil (Pressure Advance)",filteringFor:"Filtern nach: {{material}}",noKProfile:"Kein K-Profil (Standard 0.020 verwenden)",noMatchingKProfiles:"Keine passenden K-Profile gefunden. Standard K=0.020 wird verwendet.",selectFilamentFirst:"Zuerst ein Filamentprofil auswählen",kFromCalibration:"K={{value}} aus Druckerkalibrierung",customColorLabel:"Benutzerdefinierte Farbe (optional)",presetColors:"{{name}} Farben:",showLessColors:"Weniger Farben anzeigen",showMoreColors:"Mehr Farben anzeigen",clear:"Löschen",hexLabel:"Hex: #{{hex}}",resetting:"Wird zurückgesetzt...",resetSlot:"Slot zurücksetzen",cancel:"Abbrechen",configuring:"Wird konfiguriert...",configureSlot:"Slot konfigurieren"},githubBackup:{title:"GitHub-Backup",history:"Verlauf",downloadBackup:"Backup herunterladen",restoreBackup:"Backup wiederherstellen",noBackupsYet:"Noch keine Backups"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Tags suchen...",renameTag:"Tag umbenennen",deleteTag:"Tag löschen"},notificationTemplates:{placeholders:{title:"Benachrichtigungstitel...",body:"Benachrichtigungstext..."}},batchTag:{placeholders:{newTag:"Neuen Tag eingeben..."}},photoGallery:{deletePhoto:"Foto löschen"},filamentHoverCard:{copySpoolUuid:"Spulen-UUID kopieren"},kProfilesView:{hasNote:"Hat Notiz",copyProfile:"Profil kopieren"},layout:{openMenu:"Menü öffnen",noPermissionSystemInfo:"Sie haben keine Berechtigung zum Anzeigen von Systeminformationen"},dashboard:{dragToReorder:"Ziehen zum Neuordnen",hideWidget:"Widget ausblenden"},notificationProviderCard:{deleteNotificationProvider:"Benachrichtigungsanbieter löschen"},fileManagerModal:{closeFileManager:"Dateimanager schließen",sortFiles:"Dateien sortieren",goToParentFolder:"Zum übergeordneten Ordner gehen",threeView:"3D-Ansicht"},embeddedCameraViewer:{refreshStream:"Stream aktualisieren",close:"Schließen",zoomOut:"Verkleinern",resetZoom:"Zoom zurücksetzen",zoomIn:"Vergrößern",dragToResize:"Ziehen zum Größe ändern"},timelapseViewer:{skipBack5s:"5s zurückspringen",skipForward5s:"5s vorspringen"},notificationProviders:{descriptions:{email:"SMTP-E-Mail-Benachrichtigungen",telegram:"Benachrichtigungen über Telegram-Bot",discord:"An Discord-Kanal über Webhook senden",ntfy:"Kostenlose, selbst hostbare Push-Benachrichtigungen",pushover:"Einfache, zuverlässige Push-Benachrichtigungen",callmebot:"Kostenlose WhatsApp-Benachrichtigungen über CallMeBot",webhook:"Generischer HTTP POST zu beliebiger URL"}},logViewer:{searchPlaceholder:"Nachricht oder Logger-Name suchen...",noLogEntries:"Keine Logeinträge gefunden"},switchbarPopover:{noSwitchesInSwitchbar:"Keine Schalter in Schalterleiste"},projectPageModal:{placeholders:{title:"Titel",designer:"Designer",license:"Lizenz",description:"Beschreibung eingeben...",profileTitle:"Profil-Titel",profileDescription:"Profilbeschreibung..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Wartend",justNow:"Gerade eben",now:"Jetzt",minsAgo:"vor {{count}}m",inMins:"in {{count}}m",hoursAgo:"vor {{count}}h",inHours:"in {{count}}h",daysAgo:"vor {{count}}d",inDays:"in {{count}}d"},spoolbuddy:{nav:{dashboard:"Dashboard",ams:"AMS",inventory:"Inventar",writeTag:"Schreiben",settings:"Einstellungen"},status:{nfcReady:"NFC bereit",nfcOff:"NFC aus",offline:"Offline",online:"Online",noPrinters:"Keine Drucker",deviceOffline:"Gerät offline",waitingConnection:"Warte auf Geräteverbindung...",systemReady:"System bereit",status:"Status"},dashboard:{readyToScan:"Bereit zum Scannen",idleMessage:"Spule auf die Waage legen zum Identifizieren",nfcHint:"NFC-Tag wird automatisch gelesen",device:"Gerät",syncWeight:"Gewicht sync.",weightSynced:"Synchronisiert!",unknownTag:"Unbekannter Tag",newTag:"Neuer Tag erkannt",onScale:"auf der Waage",linkSpool:"Mit Spule verknüpfen",linkTagTitle:"Tag mit Spule verknüpfen",linkTag:"Tag verknüpfen",selectSpool:"Spule zum Verknüpfen auswählen:",noUntagged:"Keine Spulen ohne Tags gefunden",tagDetected:"Tag erkannt",noTag:"Kein Tag",tagId:"Tag",grossWeight:"Bruttogewicht",spoolSize:"Spulengröße",close:"Schließen",currentSpool:"Aktuelle Spule",plateReady:"Druckplatte bereit: {{name}}",plateReadyLabel:"Bereit-zum-Quittieren-Liste",plateClearAction:"Frei",plateClearedToast:"Druckplatte als geleert markiert",plateClearFailed:"Druckplatte konnte nicht als geleert markiert werden"},modal:{spoolDetected:"Spule erkannt",assignToAms:"AMS zuweisen",syncWeight:"Gewicht sync.",weightSynced:"Synchronisiert!",syncing:"Synchronisiere...",newTagDetected:"Neuer Tag erkannt",addToInventory:"Zum Inventar hinzufügen",assignToAmsTitle:"AMS zuweisen",selectSlot:"Slot auswählen",assign:"Zuweisen",assigning:"Zuweisen...",assignSuccess:"Zugewiesen!",assignError:"Fehler beim Zuweisen. Bitte erneut versuchen.",noPrinterSelected:"Drucker auswählen...",noAmsDetected:"Kein AMS an diesem Drucker erkannt",slot:"Slot"},weight:{noReading:"Kein Messwert",stable:"Stabil",measuring:"Messen...",tare:"Tarieren",calibrate:"Kalibrieren"},spool:{remaining:"Verbleibend",material:"Material",brand:"Marke",color:"Farbe",coreWeight:"Kern",labelWeight:"Etikett",scaleWeight:"Waage",netWeight:"Netto",lastUsed:"Zuletzt verwendet"},ams:{noData:"Kein AMS erkannt",connectAms:"AMS anschließen um Filament-Slots zu sehen",noPrinter:"Kein Drucker ausgewählt",selectPrinter:"Drucker in der oberen Leiste auswählen",printerDisconnected:"Drucker getrennt",humidity:"Feuchtigkeit",level:"Stufe",active:"Aktiv",slot:"Slot",empty:"Leer"},inventory:{search:"Spulen suchen...",empty:"Keine Spulen im Inventar",noResults:"Keine passenden Spulen",spools:"Spulen",addSpool:"Spule hinzufügen"},settings:{tabDevice:"Gerät",tabDisplay:"Anzeige",tabScale:"Waage",tabUpdates:"Updates",nfcReader:"NFC-Leser",type:"Typ",connection:"Verbindung",notConnected:"N/A",deviceInfo:"Geräteinfo",hostname:"Host",uptime:"Betriebszeit",systemConfig:"Backend & Auth",backendUrl:"Bambuddy Backend URL",apiToken:"API-Token",apiTokenPlaceholder:"API-Token eingeben",saveConfig:"Konfiguration speichern",systemQueued:"Konfiguration in Warteschlange.",nfcDiagnostic:"NFC-Diagnose",scaleDiagnostic:"Waagen-Diagnose",readTagDiagnostic:"Tag-Lese-Diagnose",testNfc:"Leser testen",testScale:"Genauigkeit testen",testReadTag:"Tag lesen",systemFieldsRequired:"Backend-URL ist erforderlich.",brightness:"Helligkeit",saved:"Gespeichert",noBacklight:"Keine DSI-Hintergrundbeleuchtung erkannt. Helligkeitssteuerung erfordert ein DSI-Display.",screenBlank:"Bildschirm-Abschaltzeit",screenBlankDesc:"Bildschirm schaltet sich nach Inaktivität ab. Zum Aufwecken berühren.",displayNote:"Helligkeit wird als Software-Filter angewendet.",scaleCalibration:"Waagen-Kalibrierung",currentWeight:"Aktuelles Gewicht",tareOffset:"Tara",calFactor:"Faktor",knownWeight:"Bekanntes Gewicht",calStep1:"Alle Gegenstände von der Waage entfernen und Nullpunkt setzen.",calStep2:"Bekanntes Gewicht auf die Waage legen.",setZero:"Nullpunkt setzen",calibrateNow:"Kalibrieren",calibrated:"Kalibriert",tareSet:"Tara-Befehl gesendet. Warte auf Gerät...",tareFailed:"Tara-Befehl fehlgeschlagen",zeroSet:"Nullpunkt gesetzt. Bekanntes Gewicht auf die Waage legen.",calibrationDone:"Kalibrierung abgeschlossen!",calibrationFailed:"Kalibrierung fehlgeschlagen",lastCalibrated:"Zuletzt kalibriert",stable:"Stabil",settling:"Stabilisierung...",firmware:"Firmware",scale:"Waage",noDevice:"Kein SpoolBuddy-Gerät gefunden",daemonVersion:"Daemon-Version",currentVersion:"Aktuell",versionPending:"Warte auf Daemon...",checking:"Prüfe...",checkUpdates:"Nach Updates suchen",updateAvailable:"Update verfügbar",updateInstructions:"Update per SSH: SpoolBuddy-Installationsskript ausführen.",upToDate:"Aktuell",includeBeta:"Beta-Versionen einschließen"},writeTag:{tabExisting:"Vorhandene Spule",tabNew:"Neue Spule",tabReplace:"Tag ersetzen",searchPlaceholder:"Suche nach Material, Farbe, Marke...",noUntaggedSpools:"Keine Spulen ohne Tags",noTaggedSpools:"Keine Spulen mit Tags",selectSpool:"Spule auswählen, dann einen NTAG auf den Leser legen",placeTag:"NTAG auf den Leser legen",tagReady:"Tag erkannt — bereit zum Schreiben",writeTag:"Tag beschreiben",replaceTag:"Tag ersetzen",writing:"Tag wird beschrieben...",waiting:"Warte auf SpoolBuddy...",writeSuccess:"Tag erfolgreich beschrieben!",writeFailed:"Schreiben fehlgeschlagen",queueFailed:"Schreibbefehl konnte nicht eingereiht werden",tryAgain:"Erneut versuchen",cancel:"Abbrechen",replaceWarning:"Alter Tag wird getrennt. Neuer Tag ersetzt ihn.",deviceOffline:"SpoolBuddy ist offline",material:"Material",colorName:"Farbname",color:"Farbe",brand:"Marke",weight:"Gewicht (g)",createSpool:"Spule erstellen",creating:"Wird erstellt...",spoolCreated:"Spule erstellt! Bereit zum Schreiben.",createFailed:"Spule konnte nicht erstellt werden"},quickMenu:{printerPower:"Drucker-Strom",systemControls:"System",restartDaemon:"Daemon neustarten",restartBrowser:"Browser neustarten",reboot:"Neustart",shutdown:"Herunterfahren",swipeToClose:"Nach unten wischen zum Schließen",confirmTitle:"Bestätigen",confirmShutdown:"Möchten Sie das SpoolBuddy wirklich herunterfahren? Sie benötigen physischen Zugang, um es wieder einzuschalten.",confirmReboot:"Möchten Sie das SpoolBuddy wirklich neu starten?",confirmRestartDaemon:"SpoolBuddy-Daemon neustarten? NFC und Waage sind vorübergehend nicht verfügbar.",confirmRestartBrowser:"Kiosk-Browser neustarten? Das Display wird kurz schwarz.",confirm:"Bestätigen",confirmPlugOn:"{{name}} einschalten?",confirmPlugOff:"{{name}} ausschalten?",turnOn:"Einschalten",turnOff:"Ausschalten"}},bugReport:{title:"Fehler melden",description:"Beschreibung",descriptionPlaceholder:"Was ist schiefgelaufen? Bitte beschreiben Sie das Problem...",email:"E-Mail (optional)",emailPlaceholder:"ihre@email.de",emailPrivacy:"Falls angegeben, wird Ihre E-Mail in einem eingeklappten Abschnitt des GitHub-Issues aufgeführt, damit der Betreuer sich melden kann.",screenshot:"Screenshot",uploadOrPaste:"Bild hochladen, einfügen oder ziehen",dataCollectedSummary:"Welche Daten werden im Bericht gesendet?",dataIncluded:"Enthalten:",dataIncludedList:"App-Version, Betriebssystem, Architektur, Python-Version, Datenbankstatistiken (nur Anzahl), Druckermodelle, Düsenanzahl, Firmware-Versionen, Verbindungsstatus, Integrationsstatus (Spoolman, MQTT, HA), nicht-sensible Einstellungen, Netzwerkschnittstellenanzahl, Docker-Details, Abhängigkeitsversionen.",dataNeverIncluded:"Nie enthalten:",dataNeverIncludedList:"Druckernamen, Seriennummern, Zugangscodes, Passwörter, IP-Adressen, E-Mail-Adressen, API-Schlüssel, Tokens, Webhook-URLs, Hostnamen oder Benutzernamen.",submit:"Absenden",startLogging:"Debug-Protokollierung starten",stepEnableLogging:"Debug-Protokollierung aktiviert",stepReproduce:"Problem jetzt reproduzieren",stepStopLogging:"Stoppen & Bericht senden",stopAndSubmit:"Stoppen & Senden",maxDuration:"Stoppt automatisch nach {{minutes}} Min.",stoppingLogs:"Protokolle sammeln & senden...",submitting:"Fehlerbericht wird gesendet...",submitSuccess:"Fehlerbericht erfolgreich gesendet!",submitFailed:"Fehlerbericht konnte nicht gesendet werden",thankYou:"Vielen Dank!",submitted:"Ihr Fehlerbericht wurde eingereicht.",viewIssue:"Issue ansehen",unexpectedError:"Ein unerwarteter Fehler ist aufgetreten"},failureDetection:{title:"KI-Fehlererkennung",description:"Überwacht Drucke über eine selbst gehostete Obico-ML-API und reagiert automatisch auf erkannte Fehldrucke.",mlUrl:"Obico-ML-API-URL",mlUrlHint:"Basis-URL deines selbst gehosteten Obico-ml_api-Containers (z. B. http://192.168.1.10:3333).",test:"Testen",testSuccess:"ML-API erreichbar und funktionsfähig.",testFailed:"ML-API konnte nicht erreicht werden.",sensitivity:"Empfindlichkeit",sensitivityLow:"Niedrig (weniger Fehlalarme)",sensitivityMedium:"Mittel (ausgewogen)",sensitivityHigh:"Hoch (frühe Erkennung, mehr Fehlalarme)",sensitivityHint:"Passt die Konfidenz-Schwellwerte an, die Warnungen und Fehler auslösen.",action:"Aktion bei erkanntem Fehler",actionNotify:"Nur benachrichtigen",actionPause:"Druck pausieren",actionPauseOff:"Pausieren und Strom abschalten",pollInterval:"Prüfintervall (Sekunden)",pollIntervalHint:"Wie oft jeder Drucker während eines laufenden Drucks geprüft wird. Minimum 5 s, Maximum 120 s.",externalUrlMissing:"Externe URL ist nicht gesetzt.",externalUrlHint:"Die ML-API ruft das Kamera-Snapshot per URL ab. Setze die externe URL in den allgemeinen Einstellungen, damit der ML-API-Container Bambuddy erreichen kann.",perPrinterTitle:"Überwachte Drucker",perPrinterHint:"Wähle, welche Drucker vom Erkennungsdienst überwacht werden.",monitorAll:"Alle verbundenen Drucker überwachen",statusTitle:"Status",serviceRunning:"Dienst läuft",thresholds:"Niedrig / Hoch-Schwellwerte",activePrinters:"Aktive Drucke",noActivePrints:"Derzeit laufen keine Drucke.",historyTitle:"Letzte Erkennungen",noHistory:"Noch keine Erkennungen."},makerworld:{title:"MakerWorld",description:"Füge eine MakerWorld-Modell-URL ein, um es direkt aus Bambuddy zu importieren und zu drucken — ohne die Bambu Handy App zu öffnen.",pasteUrlHeader:"Von MakerWorld importieren",pasteUrlPlaceholder:"https://makerworld.com/de/models/… oder beliebigen MakerWorld-Link einfügen",resolveButton:"Laden",signInRequiredTitle:"Bambu-Cloud-Anmeldung für Download erforderlich",signInRequiredBody:"Modell-Details können anonym angezeigt werden, aber MakerWorld verlangt eine Bambu-Cloud-Anmeldung zum Herunterladen der 3MF-Dateien.",openCloudSettings:"Cloud-Einstellungen öffnen",untitledModel:"Unbenanntes Modell",byCreator:"von {{name}}",downloadsCount:"{{count}} Downloads",licensePrefix:"Lizenz",alreadyImported:"Bereits in Bibliothek",openOnMakerworld:"Auf MakerWorld öffnen",alreadyInLibrary:"Dieses Modell ist bereits in deiner Bibliothek — zu finden im Dateimanager → MakerWorld",importSuccess:"{{filename}} importiert — gespeichert im Dateimanager → MakerWorld",platesHeader:"Platten ({{count}})",plateDefaultName:"Platte {{n}}",materialCount:"{{count}} Filamente",amsRequired:"AMS erforderlich",slicedFor:"Gesliced für {{printer}}",alsoCompatible:"Auch kompatibel: {{printers}}",importToLibrary:"Speichern",sliceIn:"Speichern & in {{slicer}} öffnen",disclaimer:"Die MakerWorld-Integration verwendet von der Community dokumentierte API-Endpunkte. Bambuddy ist nicht mit MakerWorld oder Bambu Lab verbunden oder von diesen unterstützt.",lastImportSuccess:"In deine Bibliothek importiert",lastImportAlreadyInLibrary:"Bereits in deiner Bibliothek",viewInLibrary:"Im Dateimanager anzeigen",openInBambuStudio:"In Bambu Studio öffnen",openInOrcaSlicer:"In OrcaSlicer öffnen",importTo:"In Dateimanager importieren",recentImportsHeader:"Zuletzt importiert",phaseResolving:"Auflösen",phaseDownloading:"Lade herunter",folderAuto:"MakerWorld (Standard)",importAll:"Alle importieren",importAllProgress:"Importiere {{current}}/{{total}}",openGallery:"Bildergalerie öffnen",galleryPrev:"Vorheriges Bild",galleryNext:"Nächstes Bild",deleteImport:"Aus Bibliothek entfernen",importDeleting:"Wird entfernt…",importDeleted:"Aus Bibliothek entfernt",confirmDelete:"{{filename}} aus der Bibliothek entfernen? Die lokale Datei wird gelöscht, die Platte kann aber erneut von MakerWorld importiert werden.",errors:{resolveFailed:"Diese MakerWorld-URL konnte nicht aufgelöst werden.",downloadFailed:"Download fehlgeschlagen. Bitte erneut versuchen.",deleteFailed:"Datei konnte nicht aus der Bibliothek entfernt werden."}},libraryTrash:{title:"Papierkorb",headerButton:"Papierkorb",headerTooltip:"In den Papierkorb verschobene Dateien anzeigen",backToFiles:"Zurück zum Dateimanager",subtitleAdmin:"Gelöschte Dateien bleiben {{days}} Tage hier und werden dann automatisch entfernt. Diese Ansicht zeigt Papierkorb-Dateien aller Benutzer.",subtitleUser:"Gelöschte Dateien bleiben {{days}} Tage hier und werden dann automatisch entfernt.",loading:"Papierkorb wird geladen…",loadError:"Papierkorb konnte nicht geladen werden.",empty:"Der Papierkorb ist leer.",summary:"{{count}} Dateien · {{size}}",emptyTrash:"Papierkorb leeren",restore:"Wiederherstellen",purgeNow:"Jetzt löschen",autoPurgeIn:"Wird in {{when}} gelöscht",days:"Tage",retentionLabel:"Automatisch löschen nach",selectAll:"Alle auswählen",selectOne:"{{filename}} auswählen",selectionCount:"{{count}} ausgewählt",bulkRestore:"Auswahl wiederherstellen",bulkPurge:"Auswahl löschen",col:{filename:"Datei",folder:"Ordner",size:"Größe",deleted:"Verschoben",autoPurge:"Löschung",owner:"Besitzer",actions:"Aktionen"},confirm:{purgeTitle:"Endgültig löschen?",purgeBody:"{{filename}} wird von der Festplatte gelöscht und kann nicht wiederhergestellt werden.",emptyTitle:"Papierkorb leeren?",emptyBody:"Alle {{count}} Dateien werden endgültig von der Festplatte gelöscht.",bulkPurgeTitle:"Ausgewählte Dateien endgültig löschen?",bulkPurgeBody:"Die {{count}} ausgewählten Dateien werden von der Festplatte gelöscht und können nicht wiederhergestellt werden.",cta:"Endgültig löschen"},toast:{restored:"Datei wiederhergestellt.",restoreFailed:"Datei konnte nicht wiederhergestellt werden.",purged:"Datei endgültig gelöscht.",purgeFailed:"Datei konnte nicht gelöscht werden.",emptied:"{{count}} Datei(en) aus dem Papierkorb gelöscht.",emptyFailed:"Papierkorb konnte nicht geleert werden.",retentionSaved:"Automatisches Löschen auf {{days}} Tage gesetzt.",retentionFailed:"Einstellung konnte nicht gespeichert werden.",bulkRestored:"{{count}} Datei(en) wiederhergestellt.",bulkPurged:"{{count}} Datei(en) gelöscht."}},libraryPurge:{title:"Alte Dateien entfernen",headerButton:"Alte entfernen",headerTooltip:"Alte Dateien im Block in den Papierkorb verschieben",description:"Räume alte Dateien in einem Rutsch aus deiner Bibliothek. Dateien mit Druckverlauf werden nach dem letzten Druckdatum bewertet; nie gedruckte Dateien nach dem Upload-Datum.",ageLabel:"Dateien älter als",days:"Tage",includeNeverPrinted:"Dateien einbeziehen, die nie gedruckt wurden",effectsTitle:'Was passiert, wenn du auf „Entfernen" klickst',effect1:"Passende Dateien werden in den Papierkorb verschoben — noch nicht von der Festplatte gelöscht.",effect2:"Du kannst sie bis zum Ablauf der Aufbewahrungsfrist jederzeit wiederherstellen.",effect3:"Nach Ablauf der Frist löscht der Papierkorb-Sweeper sie endgültig von der Festplatte.",effect4:"Dateien in externen (verknüpften) Ordnern werden übersprungen — Bambuddy löscht keine Bytes, die ihm nicht gehören.",previewLoading:"Prüfe, wie viele Dateien passen…",previewFailed:"Vorschau konnte nicht geladen werden.",previewSummary:"{{count}} Dateien · {{size}} würden in den Papierkorb verschoben",andMore:"…und {{count}} weitere",warning:"Dateien im Papierkorb zählen weiterhin zum Speicher, bis die Aufbewahrungsfrist abgelaufen ist. Leere den Papierkorb danach, um sofort Speicher freizugeben.",confirmCta:"{{count}} in den Papierkorb verschieben",purging:"Wird verschoben…",toast:{success:"{{count}} Datei(en) in den Papierkorb verschoben.",failed:"Dateien konnten nicht verschoben werden."}},libraryAutoPurge:{enableLabel:"Alte Dateien automatisch entfernen",enableDescription:"Führt die Admin-Bereinigung einmal pro Tag aus. Dateien landen zuerst im Papierkorb — sie werden nicht sofort gelöscht.",ageLabel:"Dateien älter als",ageDescription:"Minimum 7 Tage, Maximum 10 Jahre. Verwendet dieselbe Altersregel wie die manuelle „Alte entfernen“-Schaltfläche.",days:"Tage",includeNeverPrinted:"Dateien einbeziehen, die nie gedruckt wurden",saveFailed:"Einstellungen konnten nicht gespeichert werden."},archivePurge:{headerButton:"Alte löschen",headerTooltip:"Alte Archive in einem Rutsch löschen",title:"Alte Archive löschen",description:"Räume alte Druckhistorie auf. Jedes Archiv wird nach seinem letzten abgeschlossenen Druck bewertet — ein erneuter Druck setzt die Frist zurück, aktive Arbeit bleibt sicher.",ageLabel:"Archive löschen, die zuletzt gedruckt wurden vor",days:"Tage",effectsTitle:'Was passiert, wenn du auf „Löschen" klickst',effect1:"Jedes passende Archiv wird endgültig aus der Datenbank entfernt.",effect2:"Die 3MF-Datei, Vorschau, Timelapse, Quell-3MF, F3D-Designdatei und der Foto-Ordner werden von der Festplatte gelöscht.",effect3:"Es gibt keinen Papierkorb für Archive — die Löschung ist sofort und unwiderruflich.",effect4:"Ein erneuter Druck setzt die Frist zurück, Archive, die du weiterhin nutzt, bleiben sicher.",previewLoading:"Prüfe passende Archive…",previewFailed:"Vorschau konnte nicht erstellt werden.",previewSummary:"{{count}} Archive · {{size}} werden gelöscht",andMore:"…und {{count}} weitere",warning:"Dies ist endgültig. Lade wichtige Archive vorher herunter oder markiere sie als Favorit.",confirmCta:"{{count}} Archiv(e) löschen",purging:"Lösche…",toast:{success:"{{count}} Archiv(e) gelöscht.",failed:"Archive konnten nicht gelöscht werden."}},archiveAutoPurge:{enableLabel:"Alte Archive automatisch löschen",enableDescription:"Löscht einmal pro Tag Archive endgültig, die im angegebenen Zeitraum nicht gedruckt wurden. Ein erneuter Druck setzt die Frist zurück. Kein Papierkorb — die Löschung erfolgt sofort.",ageLabel:"Archive automatisch löschen, die zuletzt gedruckt wurden vor",ageDescription:"Minimum 7 Tage, Maximum 10 Jahre. Basiert auf dem letzten abgeschlossenen Druck — ein erneuter Druck setzt die Frist zurück. Löscht Archiv, 3MF, Vorschaubild, Timelapse und Fotos.",days:"Tage",runNow:"Archive jetzt löschen",saveFailed:"Einstellungen konnten nicht gespeichert werden."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},wme={nav:{printers:"Imprimantes",archives:"Archives",queue:"File d'attente",stats:"Statistiques",profiles:"Profils",maintenance:"Maintenance",projects:"Projets",inventory:"Filament",files:"Gestionnaire de fichiers",makerworld:"MakerWorld",notifications:"Notifications",settings:"Paramètres",system:"Système",collapseSidebar:"Réduire la barre latérale",expandSidebar:"Développer la barre latérale",update:"Mise à jour",updateAvailable:"Mise à jour disponible : v{{version}}",updateAvailableBanner:"La version {{version}} est disponible !",viewUpdate:"Voir la mise à jour",viewOnGithub:"Voir sur GitHub",keyboardShortcuts:"Raccourcis clavier (?)",switchToLight:"Passer au mode clair",switchToDark:"Passer au mode sombre",smartSwitches:"Interrupteurs intelligents",logout:"Déconnexion"},common:{save:"Enregistrer",saving:"Enregistrement...",cancel:"Annuler",delete:"Supprimer",edit:"Modifier",add:"Ajouter",close:"Fermer",confirm:"Confirmer",loading:"Chargement...",error:"Erreur",success:"Succès",warning:"Avertissement",enabled:"Activé",disabled:"Désactivé",yes:"Oui",no:"Non",on:"On",off:"Off",all:"Tous",none:"Aucun",search:"Rechercher",filter:"Filtrer",sort:"Trier",refresh:"Actualiser",download:"Télécharger",upload:"Téléverser",uploading:"Téléversement...",uploadFailed:"Échec du téléversement",actions:"Actions",status:"Statut",name:"Nom",description:"Description",date:"Date",time:"Heure",hours:"heures",minutes:"minutes",seconds:"secondes",days:"jours",enable:"Activer",disable:"Désactiver",permissions:"Autorisations",noPrinters:"Aucune imprimante configurée",noData:"Aucune donnée disponible",linkNotFound:"Lien non trouvé",required:"Requis",optional:"Optionnel",dismiss:"Ignorer",apply:"Appliquer",reset:"Réinitialiser",export:"Exporter",import:"Importer",clear:"Effacer",selectAll:"Tout sélectionner",deselectAll:"Tout désélectionner",noChange:"— Aucun changement —",unchanged:"Inchangé",unassigned:"Non assigné",unknown:"Inconnu",unknownError:"Erreur inconnue",today:"Aujourd'hui",tomorrow:"Demain",asap:"Dès que possible",overdue:"En retard",now:"Maintenant",collapse:"Réduire",expand:"Développer",viewArchive:"Voir l'archive",viewInFileManager:"Voir dans le gestionnaire de fichiers",addedBy:"Ajouté par {{username}}",prints:"impressions",more:"+{{count}} de plus",ascending:"Croissant",descending:"Décroissant",back:"Retour",copy:"Copier",copied:"Copié !",printer:"Imprimante",remove:"Retirer",type:"Type",print:"Imprimer",rename:"Renommer",move:"Déplacer",create:"Créer",duplicate:"Dupliquer",left:"Gauche",right:"Droite"},printers:{title:"Imprimantes",addPrinter:"Ajouter une imprimante",editPrinter:"Modifier l'imprimante",deletePrinter:"Supprimer l'imprimante",printerName:"Nom de l'imprimante",serialNumber:"Numéro de série",ipAddress:"Adresse IP / Nom d'hôte",accessCode:"Code d'accès",model:"Modèle",nozzleCount:"Nombre de buses",autoArchive:"Auto-archivage",status:{available:"Disponible",idle:"Inactif",printing:"Impression en cours",paused:"En pause",offline:"Hors ligne",problem:"Problème",error:"Erreur",finished:"Terminé",unknown:"Inconnu"},temperatures:{nozzle:"Buse",bed:"Plateau",chamber:"Chambre"},progress:"{{percent}}% terminé",timeRemaining:"{{time}} restant",deleteConfirm:'Êtes-vous sûr de vouloir supprimer "{{name}}" ?',maintenanceOk:"Maintenance OK",maintenanceWarning:"{{count}} avertissement",maintenanceWarning_plural:"{{count}} avertissements",maintenanceDue:"{{count}} échéance",maintenanceDue_plural:"{{count}} échéances",sort:{name:"Nom",status:"Statut",model:"Modèle",location:"Emplacement",ascending:"Tri croissant",descending:"Tri décroissant"},cardSize:{small:"Petites cartes",medium:"Cartes moyennes",large:"Grandes cartes",extraLarge:"Très grandes cartes"},hideOffline:"Masquer hors ligne",nextAvailable:"Prochaine disponible",powerOn:"Allumer",offlinePrintersWithPlugs:"Imprimantes hors ligne avec prises connectées",noPrintersConfigured:"Aucune imprimante configurée pour le moment",search:"Rechercher des imprimantes...",noSearchResults:"Aucune imprimante ne correspond à votre recherche ou à vos filtres",filter:{allStatuses:"Tous les statuts",allLocations:"Tous les emplacements"},readyToPrint:"Prête à imprimer",external:"Externe",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Supprimer les archives d'impression",noLabel:"Pas d'étiquette",printPreview:"Aperçu avant impression",width:"Largeur",height:"Hauteur",noObjectsFound:"Aucun objet trouvé",objectsLoadedOnPrintStart:"Les objets sont chargés au début de l'impression",willBeSkipped:"Sera sauté",name:"Nom",serialCannotBeChanged:"Le numéro de série ne peut pas être modifié",locationHelp:"Utilisé pour grouper les imprimantes et filtrer la file d'attente",wifiSignal:{veryWeak:"Très faible",weak:"Faible",fair:"Moyen",good:"Bon",excellent:"Excellent"},maintenanceUpToDate:"Maintenance à jour - Cliquez pour voir",chamberLightOn:"Allumer la lumière de la chambre",chamberLightOff:"Éteindre la lumière de la chambre",files:"Fichiers",browseFiles:"Parcourir les fichiers de l'imprimante",autoOffAfterPrint:"Extinction auto après impression",autoOffExecuted:"Extinction auto exécutée - rallumez pour réinitialiser",hmsErrors:"Erreurs HMS",viewHmsErrors:"Voir {{count}} erreur(s) HMS",resume:"Reprendre",pause:"Pause",stop:"Arrêter",camera:"Caméra",skipObject:"Sauter l'objet",reconnect:"Reconnecter",forceRefresh:"Forcer l'actualisation",forceRefreshSuccess:"Actualisation demandée",mqttDebug:"Débogage MQTT",printerInformation:"Informations imprimante",copyToClipboard:"Copier",copied:"Copié !",state:"État",wifiSignalLabel:"Signal WiFi",developerMode:"Mode développeur",enabled:"Activé",disabled:"Désactivé",addedOn:"Ajoutée le",sdCard:"Carte SD",inserted:"Insérée",notInserted:"Non insérée",totalPrintHours:"Heures d'impression",activeNozzle:"Active : buse {{nozzle}}",nozzleRack:"Rack à buses",nozzleDocked:"Rangée",nozzleMounted:"Montée",nozzleActive:"Active",nozzleIdle:"Inactive",nozzleDiameter:"Diamètre",nozzleType:"Type",nozzleStatus:"Statut",nozzleFilament:"Filament",nozzleWear:"Usure",nozzleMaxTemp:"Temp Max",nozzleSerial:"Série",nozzleHardenedSteel:"Acier Trempé",nozzleStainlessSteel:"Acier Inoxydable",nozzleTungstenCarbide:"Carbure de Tungstène",nozzleFlow:"Débit",nozzleHighFlow:"Haut débit",nozzleStandardFlow:"Standard",firmwareUpdate:"Mise à jour Firmware",firmwareInstructions:"Sur l'écran de l'imprimante, allez dans",firmwareNav:"Naviguez vers",settings:"Paramètres",firmware:"Firmware",discoverPrinters:"Découvrir les imprimantes",searching:"Recherche...",manualEntry:"Saisie manuelle",addFromCloud:"Ajouter depuis le Cloud",toast:{printerDeleted:"Imprimante supprimée",missingSpoolAssignment:"Impression démarrée sur {{printer}}. Attribution de bobine manquante pour : {{slots}}",printerAdded:"Imprimante ajoutée",printerUpdated:"Imprimante mise à jour",failedToDelete:"Échec de la suppression",failedToAdd:"Échec de l'ajout",failedToUpdate:"Échec de la mise à jour",commandSent:"Commande envoyée",failedToSendCommand:"Échec de l'envoi de la commande",turnedOn:"{{name}} allumée",failedToPowerOn:"Échec de l'allumage de {{name}}",scriptTriggered:"Script déclenché",printStopped:"Impression arrêtée",printPaused:"Impression en pause",printResumed:"Impression reprise",referenceDeleted:"Référence supprimée",detectionAreaSaved:"Zone de détection enregistrée",failedToRunScript:"Échec du script",failedToStopPrint:"Échec de l'arrêt",failedToPausePrint:"Échec de la mise en pause",failedToResumePrint:"Échec de la reprise",failedToControlChamberLight:"Échec du contrôle de la lumière",failedToSetSpeed:"Échec du réglage de la vitesse",failedToUpdateSetting:"Échec de mise à jour du paramètre",failedToSkipObjects:"Échec du saut d'objets",failedToRereadRfid:"Échec lecture RFID",failedToCheckPlate:"Échec vérification plateau",failedToUpdateLabel:"Échec mise à jour étiquette",failedToDeleteReference:"Échec suppression référence",failedToSaveDetectionArea:"Échec enregistrement zone",plateCheckEnabled:"Vérification plateau activée",plateCheckDisabled:"Vérification plateau désactivée",calibrationSaved:"Calibration enregistrée !",calibrationFailed:"Échec de la calibration",rfidRereadInitiated:"Lecture RFID initiée"},connection:{connected:"Connecté",offline:"Hors ligne"},plateStatus:{markCleared:"Marquer le plateau comme dégagé",cleared:"Plateau dégagé",notCleared:"Plateau non dégagé",inUse:"Plateau en cours d'utilisation"},queue:{inQueue:"{{count}} impression en file",inQueue_plural:"{{count}} impressions en file"},controls:"Contrôles",rfid:{reread:"Relire RFID"},bedJog:{title:"Déplacer le plateau",bed:"Plateau",step:"Pas (mm)",up:"Monter le plateau",down:"Descendre le plateau",disabledWhilePrinting:"Désactivé pendant l'impression",notHomedTitle:"Imprimante non référencée",notHomedMessage:"L'imprimante n'a pas été référencée depuis la dernière impression. Lancez la référence automatique d'abord pour un positionnement sûr (parque la tête d'outil, puis référence X, Y et Z), ou déplacez quand même — les butées logicielles seront ignorées.",homeZ:"Référence automatique",moveAnyway:"Déplacer quand même",homingStarted:"Référencement automatique en cours…"},permission:{noAdd:"Pas d'autorisation pour ajouter",noEdit:"Pas d'autorisation pour modifier",noDelete:"Pas d'autorisation pour supprimer",noControl:"Pas d'autorisation pour contrôler",noFiles:"Pas d'autorisation pour les fichiers",noAmsRfid:"Pas d'autorisation pour le RFID",noSmartPlugControl:"Pas d'autorisation pour les prises",noCamera:"Pas d'autorisation pour les caméras"},modal:{addTitle:"Ajouter une imprimante",editTitle:"Modifier l'imprimante",myPrinter:"Mon imprimante",selectModel:"Choisir un modèle...",locationGroup:"Emplacement / Groupe (optionnel)",locationPlaceholder:"ex: Atelier, Bureau",autoArchiveLabel:"Auto-archiver les impressions terminées",fromPrinterSettings:"Depuis les paramètres imprimante",modelOptional:"Modèle (optionnel)",saveChanges:"Enregistrer les modifications"},skipObjects:{tooltip:"Sauter des objets",onlyWhilePrinting:"Sauter (uniquement pendant l'impression)",requiresMultiple:"Sauter (nécessite 2+ objets)",title:"Sauter des objets",matchIdsInfo:"Faites correspondre les IDs avec l'écran de l'imprimante",printerShowsIds:"L'écran affiche les IDs des objets sur le plateau",skipSelected:"Sauter la sélection",skipping:"Saut en cours...",noObjectsSelected:"Aucun objet sélectionné",selectObjectsToSkip:"Sélectionnez les objets à ignorer",skipped:"sauté",objectsSkipped:"Objets sautés",activeCount:"{{count}} actifs",waitForLayer:"Attendez la couche 2 pour sauter des objets (actuelle : {{layer}})",skip:"Sauter",confirmTitle:"Sauter l'objet ?",confirmMessage:'Voulez-vous vraiment sauter "{{name}}" ? Cette action est irréversible.'},confirm:{deleteTitle:"Supprimer l'imprimante",deleteMessage:'Supprimer "{{name}}" ? Cela retirera tous les paramètres de connexion.',deleteArchivesNote:"Tout l'historique sera définitivement supprimé.",keepArchivesNote:"L'historique sera conservé mais plus associé à cette imprimante.",stopTitle:"Arrêter l'impression",stopMessage:`Arrêter l'impression sur "{{name}}" ?`,stopButton:"Arrêter",pauseTitle:"Mettre en pause",pauseMessage:`Mettre en pause l'impression sur "{{name}}" ?`,pauseButton:"Pause",resumeTitle:"Reprendre l'impression",resumeMessage:`Reprendre l'impression sur "{{name}}" ?`,resumeButton:"Reprendre",powerOnTitle:"Allumer l'imprimante",powerOnMessage:'Allumer "{{name}}" ?',powerOnButton:"Allumer",powerOffTitle:"Éteindre l'imprimante",powerOffMessage:'Éteindre "{{name}}" ?',powerOffWarning:`ATTENTION : "{{name}}" imprime ! L'éteindre maintenant peut endommager l'imprimante.`,powerOffButton:"Éteindre"},bulk:{select:"Sélectionner",selectAll:"Tout sélectionner",selectByLocation:"Sélectionner par emplacement",selected:"{{count}} sélectionné(s)",actions:{stop:"Arrêter",pause:"Pause",resume:"Reprendre",clearPlate:"Vider le plateau",clearHMS:"Effacer les notifications"},confirm:{stopTitle:"Arrêter {{count}} impressions",stopMessage:"Cela annulera les impressions actives sur {{count}} imprimante(s). Cette action est irréversible.",stopButton:"Tout arrêter",pauseTitle:"Mettre en pause {{count}} impressions",pauseMessage:"Cela mettra en pause les impressions actives sur {{count}} imprimante(s).",pauseButton:"Tout mettre en pause",clearPlateTitle:"Vider {{count}} plateaux",clearPlateMessage:"Cela videra le plateau sur {{count}} imprimante(s) et pourrait lancer les travaux en file d'attente.",clearPlateButton:"Tout vider"},success:"{{action}} terminé sur {{count}} imprimante(s)",partial:"{{succeeded}} réussi(s), {{failed}} échoué(s)",noneApplicable:"Aucune imprimante sélectionnée n'est dans le bon état pour cette action",selectByState:"Sélectionner par état"},discovery:{title:"Découvrir les imprimantes",searching:"Recherche...",scanning:"Scan en cours...",scanProgress:"Scan... {{scanned}}/{{total}}",foundPrinters:"{{count}} imprimante(s) trouvée(s)",noPrintersFound:"Aucune imprimante trouvée",noPrintersFoundSubnet:"Aucune imprimante dans ce sous-réseau.",noPrintersFoundNetwork:"Aucune imprimante sur le réseau.",allConfigured:"Toutes les imprimantes trouvées sont déjà configurées.",alreadyAdded:"Déjà ajoutée",select:"Sélectionner",manualEntry:"Saisie manuelle",addFromCloud:"Ajouter depuis le Cloud",subnetToScan:"Sous-réseau à scanner",dockerNote:"Docker détecté. Entrez le sous-réseau en notation CIDR. Nécessite network_mode: host.",scanSubnet:"Scanner le sous-réseau",discoverNetwork:"Découvrir sur le réseau",scanningSubnet:"Scan du sous-réseau pour imprimantes Bambu...",scanningNetwork:"Scan du réseau...",serialRequired:"Série requis",unknown:"Inconnu",failedToStart:"Échec du démarrage de la découverte"},drying:{start:"Démarrer le séchage",stop:"Arrêter le séchage",temperature:"Température",duration:"Durée",hours:"heures",timeRemaining:"{{time}} restant",active:"Séchage",notSupported:"Séchage non pris en charge",powerRequired:"Brancher l'adaptateur secteur AMS pour activer le séchage",startingDrying:"Démarrage du séchage...",stoppingDrying:"Arrêt du séchage...",rotateTray:"Tourner la bobine pendant le séchage"},filaments:"Filaments",openCameraOverlay:"Ouvrir la caméra en superposition",openCameraWindow:"Ouvrir la caméra dans une fenêtre",firmwareUpdateAvailable:"Mise à jour firmware : {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — À jour",firmwareUpdateButton:"Mettre à jour",plateDetection:{noPermission:"Pas d'autorisation de modification",enabledClick:"Vérification activée - Cliquez pour désactiver",disabledClick:"Vérification désactivée - Cliquez pour activer",manageCalibration:"Gérer la calibration de détection",calibrationRequired:"Calibration requise",calibrationInstructions:"Videz le plateau, puis cliquez sur Calibrer.",calibrationDescription:"Capture une image de référence du plateau vide.",calibrationTip:"Conseil : Stockez jusqu'à 5 références. Le système utilise la meilleure correspondance.",plateEmpty:"Le plateau semble vide",objectsDetected:"Objets détectés sur le plateau",confidence:"Confiance",difference:"Différence",analysisPreview:"Aperçu de l'analyse :",analysisLegend:"Cadre vert = zone, Rouge = différences",savedReferences:"Références ({{count}}/{{max}})",deleteReference:"Supprimer la référence",labelPlaceholder:"Étiquette...",clickToEdit:"{{label}} - Modifier",clickToAddLabel:"Ajouter une étiquette"},speed:{title:"Vitesse d'impression",silent:"Silencieux (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Mode conduit d'air",cooling:"Refroidissement",heating:"Chauffage"},noSdCard:"Pas de SD",door:{open:"Ouverte",closed:"Fermée"},fans:{partCooling:"Ventilateur pièce",auxiliary:"Ventilateur auxiliaire",chamber:"Ventilateur chambre"},clickToViewHmsErrors:"Cliquez pour voir les erreurs HMS",estimatedCompletion:"Fin estimée",plateNumber:"Plaque {{number}}",slotOptions:"Options du slot",amsPopup:{friendlyName:"Nom AMS",friendlyNamePlaceholder:"ex. Nom convivial AMS",serialNumber:"Numéro de série",firmwareVersion:"Firmware",save:"Enregistrer",clear:"Effacer",noEditPermission:"Vous n'avez pas la permission de renommer les unités AMS"},firmwareModal:{title:"Mise à jour Firmware",titleUpToDate:"Infos Firmware",currentVersion:"Actuelle :",latestVersion:"Dernière :",releaseNotes:"Notes de version",checkingPrereqs:"Vérification des prérequis...",sdCardReady:"Carte SD prête. Cliquez pour téléverser.",uploadedSuccess:"Firmware téléversé !",applyInstructions:"Pour appliquer sur l'imprimante :",step1:"Sur l'écran, allez dans Paramètres",step2:"Allez dans Firmware",step3:'Sélectionnez "Mettre à jour depuis carte SD"',step4:"Prévoyez 10-20 minutes",done:"Terminé",starting:"Démarrage...",uploadFirmware:"Téléverser le Firmware",uploadFailed:"Échec du téléversement : {{error}}",uploadedToast:"Firmware téléversé ! Lancez la mise à jour sur l'écran.",availableVersions:"Versions disponibles",usable:"Utilisable",unavailable:"Indisponible",installed:"Installé",newerBadge:"plus récent",olderBadge:"plus ancien",currentBadge:"actuel"},accessCodePlaceholder:"Laissez vide pour garder l'actuel",roi:{title:"Zone de détection (ROI)",xStart:"Début X",yStart:"Début Y",width:"Largeur",height:"Hauteur",instruction:"Ajustez le cadre vert pour cibler le plateau."},developerModeWarning:"Le mode développeur LAN n'est pas activé sur : {{names}}. Certaines fonctionnalités peuvent ne pas fonctionner.",howToEnable:"Comment activer",incompatibleFile:"Ce fichier a été tranché pour {{slicedFor}}, mais cette imprimante est une {{printerModel}}",dropNotPrintable:"Seuls les fichiers .gcode et .gcode.3mf peuvent être imprimés",dropToPrint:"Déposer pour imprimer",cannotPrint:"Imprimante occupée"},archives:{title:"Archives d'impression",searchPlaceholder:"Chercher dans les archives...",filterByPrinter:"Par imprimante",filterByStatus:"Par statut",sortBy:"Trier par",sortNewest:"Plus récent",sortOldest:"Plus ancien",sortName:"Nom",sortDuration:"Durée",sortLargest:"Plus volumineux",sortSmallest:"Plus léger",sortSize:"Taille",noArchives:"Aucune archive trouvée",noArchivesSearch:"Aucune archive ne correspond",originalPrintNotVisible:"Impression d'origine non visible - essayez d'effacer les filtres",noArchivesYet:"Pas encore d'archive",prints:"impressions",pagination:{showing:"Affichage",to:"à",of:"sur",show:"Afficher",page:"Page",all:"Tout"},loadingArchives:"Chargement...",releaseToUpload:"Relâcher pour téléverser",showAll:"Tout afficher",showFavoritesOnly:"Favoris uniquement",gridView:"Grille",listView:"Liste",calendarView:"Calendrier",logView:"Journal d'impression",manageTags:"Gérer les tags",showFailedPrints:"Afficher les échecs",hideFailedPrints:"Masquer les échecs",hideDuplicates:"Masquer les doublons",viewOriginalPrint:"Cliquez pour afficher l'impression originale (#{{id}})",printTime:"Temps d'impression",filamentUsed:"Filament utilisé",cost:"Coût",reprint:"Réimprimer",preview:"Aperçu",deleteArchive:"Supprimer l'archive",deleteConfirm:"Supprimer cette archive ?",favorite:"Favori",unfavorite:"Retirer des favoris",viewDetails:"Détails",status:{completed:"Réussi",failed:"Échoué",stopped:"Arrêté"},toast:{source3mfAttached:"Source 3MF attachée : {{filename}}",failedUploadSource3mf:"Échec téléversement 3MF",source3mfRemoved:"Source 3MF retirée",failedRemoveSource3mf:"Échec retrait 3MF",f3dAttached:"F3D attaché : {{filename}}",failedUploadF3d:"Échec téléversement F3D",f3dRemoved:"F3D retiré",failedRemoveF3d:"Échec retrait F3D",timelapseAttached:"Timelapse attaché : {{filename}}",timelapseAlreadyAttached:"Timelapse déjà présent",noMatchingTimelapse:"Pas de timelapse correspondant",failedScanTimelapse:"Échec scan timelapse",failedAttachTimelapse:"Échec attache timelapse",timelapseRemoved:"Timelapse supprimé",failedRemoveTimelapse:"Échec de la suppression du timelapse",timelapseUploaded:"Timelapse importé : {{filename}}",failedUploadTimelapse:"Échec de l'importation du timelapse",archiveDeleted:"Archive supprimée",failedDeleteArchive:"Échec suppression",addedToFavorites:"Ajouté aux favoris",removedFromFavorites:"Retiré des favoris",projectUpdated:"Projet mis à jour",failedUpdateProject:"Échec mise à jour projet",linkCopied:"Lien copié",failedCopyLink:"Échec copie lien",photoDeleted:"Photo supprimée",failedDeletePhoto:"Échec suppression photo",failedDeleteArchives:"Échec suppression archives",failedUpdateFavorites:"Échec mise à jour favoris",exportDownloaded:"Export téléchargé",exportFailed:"Échec export"},menu:{print:"Imprimer",schedule:"Planifier",openInBambuStudio:"Ouvrir dans le Slicer",slice:"Découper",externalLink:"Lien externe",viewOnMakerWorld:"Voir sur MakerWorld",preview3d:"Aperçu 3D",viewTimelapse:"Voir le Timelapse",scanForTimelapse:"Scanner pour Timelapse",uploadTimelapse:"Importer un timelapse",removeTimelapse:"Supprimer le timelapse",downloadSource3mf:"Télécharger Source 3MF",uploadSource3mf:"Téléverser Source 3MF",replaceSource3mf:"Remplacer Source 3MF",removeSource3mf:"Retirer Source 3MF",uploadF3d:"Téléverser F3D",replaceF3d:"Remplacer F3D",downloadF3d:"Télécharger F3D",removeF3d:"Retirer F3D",download:"Télécharger",copyDownloadLink:"Copier lien de téléchargement",qrCode:"Code QR",viewPhotos:"Voir les photos",viewPhotosCount:"Voir les photos ({{count}})",projectPage:"Page du Projet",addToFavorites:"Ajouter aux favoris",removeFromFavorites:"Retirer des favoris",edit:"Modifier",goToProject:"Aller au Projet : {{name}}",addToProject:"Ajouter au Projet",removeFromProject:"Retirer du Projet",loading:"Chargement...",noProjectsAvailable:"Aucun projet disponible",searchProjects:"Search projects…",select:"Sélectionner",deselect:"Désélectionner",delete:"Supprimer"},permission:{noReprint:"Pas d'autorisation de réimpression",noAddToQueue:"Pas d'autorisation pour la file",noUpdateArchives:"Pas d'autorisation de mise à jour",noUploadFiles:"Pas d'autorisation de téléversement",noDownload:"Pas d'autorisation de téléchargement",noCopyLink:"Pas d'autorisation de copie lien",noDelete:"Pas d'autorisation de suppression",noCreate:"Pas d'autorisation de création"},platePicker:{title:"Choisir une plaque à prévisualiser",hint:"Cette archive contient plusieurs plaques. Sélectionnez-en une pour l'ouvrir dans la visionneuse GCode.",plateLabel:"Plaque {{index}}",objectCount:"{{count}} objet",objectCount_plural:"{{count}} objets",noGcode:"Cette archive ne contient pas de G-code généré à prévisualiser. Ouvrez-la d'abord dans Bambu Studio pour la trancher."},card:{previousPlate:"Plateau précédent",nextPlate:"Plateau suivant",plateNumber:"Plateau {{index}}",moreOptions:"Clic droit pour plus d'options",addToFavorites:"Ajouter aux favoris",removeFromFavorites:"Retirer des favoris",cancelled:"annulé",failed:"échoué",duplicate:"doublon",duplicateTitle:"Ce modèle a déjà été imprimé",openSource3mf:"Ouvrir 3MF dans Bambu Studio (clic droit pour plus)",downloadF3d:"Télécharger fichier Fusion 360",viewTimelapse:"Voir timelapse",viewPhoto:"Voir 1 photo",viewPhotos:"Voir {{count}} photos",openFolder:"Ouvrir le dossier : {{name}}",slicedFile:"Fichier découpé - prêt",sourceFile:"Fichier source uniquement - pas de mapping AMS",gcode:"GCODE",source:"SOURCE",project:"Projet : {{name}}",estimated:"Estimé : {{time}}",actual:"Réel : {{time}}",accuracy:"Précision : {{percent}}%",filament:"{{weight}}g",layer:"{{count}} couche",layers:"{{count}} couches",object:"{{count}} objet",objects:"{{count}} objets",slicedFor:"Découpé pour {{model}}",uploadedBy:"Téléversé par",noPermissionReprint:"Pas d'autorisation de réimpression",noFileForReprint:"Aucun fichier 3MF disponible — le fichier n'a pas pu être téléchargé depuis l'imprimante lors de l'enregistrement",noPermissionEdit:"Pas d'autorisation de modification",noPermissionDelete:"Pas d'autorisation de suppression",reprint:"Réimprimer",schedulePrint:"Planifier",schedule:"Planifier",openInBambuStudio:"Ouvrir dans le Slicer",openInBambuStudioToSlice:"Ouvrir dans le Slicer pour découper",slice:"Découper",externalLink:"Lien externe",makerWorld:"MakerWorld : {{designer}}",viewProject:"Voir projet",noExternalLink:"Aucun lien externe",preview3d:"Aperçu 3D",download:"Télécharger",edit:"Modifier",delete:"Supprimer"},modal:{deleteArchive:"Supprimer l'archive",deleteConfirm:'Supprimer "{{name}}" ? Cette action est irréversible.',deleteButton:"Supprimer",removeSource3mf:"Retirer Source 3MF",removeSource3mfConfirm:'Retirer le fichier 3MF de "{{name}}" ?',removeButton:"Retirer",removeF3d:"Retirer F3D",removeF3dConfirm:'Retirer le fichier Fusion 360 de "{{name}}" ?',removeTimelapse:"Supprimer le timelapse",removeTimelapseConfirm:'Êtes-vous sûr de vouloir supprimer la vidéo timelapse de "{{name}}" ?',timelapse:"{{name}} - Timelapse",selectTimelapse:"Choisir un Timelapse",selectTimelapseDesc:"Sélectionnez manuellement le timelapse :",deleteArchives:"Supprimer les archives",deleteArchivesConfirm:"Supprimer {{count}} archive(s) ?",deleteCount:"Supprimer {{count}}"},page:{title:"Archives",printsCount:"{{filtered}} sur {{total}} impressions",dropFilesHere:"Déposez les fichiers .3mf ici",releaseToUpload:"Relâcher pour téléverser",only3mfSupported:"Seuls les fichiers .3mf sont supportés",close:"Fermer",selected:"{{count}} sélectionnés",selectAll:"Tout sélectionner",tags:"Tags",project:"Projet",favorite:"Favori",delete:"Supprimer",toggledFavorites:"Favoris mis à jour pour {{count}} archive(s)",failedUpdateFavorites:"Échec mise à jour favoris",archivesDeleted:"{{count}} archive(s) supprimée(s)",failedDeleteArchives:"Échec suppression",photoDeleted:"Photo supprimée",failedDeletePhoto:"Échec suppression photo"},list:{name:"Nom",printer:"Imprimante",date:"Date",size:"Taille",actions:"Actions",hasTimelapse:"A un timelapse"},log:{date:"Date",printName:"Nom de l'impression",printer:"Imprimante",user:"Utilisateur",status:"Statut",duration:"Durée",filament:"Filament",allPrinters:"Toutes les imprimantes",allUsers:"Tous les utilisateurs",allStatuses:"Tous les statuts",cancelled:"Annulé",skipped:"Ignoré",dateFrom:"Du",dateTo:"Au",noEntries:"Aucune entrée de journal trouvée",showing:"{{count}} sur {{total}} entrées",rowsPerPage:"Lignes",page:"Page",prev:"Préc.",next:"Suiv.",clearLog:"Effacer le journal",clearLogTitle:"Effacer le journal d'impression",clearLogConfirm:"Toutes les entrées du journal d'impression seront supprimées définitivement. Les archives et les éléments de file d'attente ne sont pas affectés. Cette action est irréversible. Êtes-vous sûr ?",clearLogButton:"Tout effacer",cleared:"{{count}} entrées de journal effacées",clearFailed:"Échec de l'effacement du journal d'impression"}},queue:{title:"File d'attente",subtitle:"Gérez vos travaux d'impression",addToQueue:"Ajouter à la file",print:"Imprimer",reprint:"Réimprimer",schedulePrint:"Planifier",editQueueItem:"Modifier l'élément",printToPrinters:"Imprimer sur {{count}} imprimantes",queueToPrinters:"Ajouter à la file pour {{count}} imprimantes",queueSelectedPlates:"Ajouter {{count}} plaques à la file",selectAllPlates:"Sélectionner les {{count}} plaques",deselectAll:"Tout désélectionner",printQueued:"Impression ajoutée à la file",itemsQueued:"{{count}} éléments ajoutés à la file",sending:"Envoi...",sendingProgress:"Envoi {{current}}/{{total}}...",adding:"Ajout...",addingProgress:"Ajout {{current}}/{{total}}...",savingProgress:"Enregistrement {{current}}/{{total}}...",clearQueue:"Vider la file",clearHistory:"Effacer l'historique",emptyQueue:"La file est vide",position:"Position",scheduledTime:"Heure prévue",moveUp:"Monter",moveDown:"Descendre",startNow:"Démarrer maintenant",printingInProgress:"Impression en cours...",viewArchive:"Voir l'archive",viewInFileManager:"Voir dans le gestionnaire",itemCount:"{{count}} élément",itemCount_plural:"{{count}} éléments",dragToReorder:"Glisser pour réordonner (ASAP uniquement)",reorderHint:"La position n'affecte que les éléments ASAP.",sjf:{label:"SJF",tooltip:"Travail le plus court en premier — le planificateur priorise les impressions plus courtes"},addedBy:"Ajouté par {{name}}",nextInQueue:"Prochain en file",clearPlateSuccess:"Plateau vidé — prêt pour l'impression suivante",plateNumber:"Plateau {{index}}",quantity:"Quantité",quantityHint:"Crée {{count}} éléments de file d'attente",activeBatches:"Lots actifs",batchProgress:"{{completed}} sur {{total}} terminés",cancelBatch:"Annuler les restants",batchCancelled:"Éléments restants du lot annulés",cancelBatchConfirmTitle:"Annuler le lot",cancelBatchConfirmMessage:"Annuler tous les éléments en attente restants dans ce lot ?",batch:"Lot",sections:{currentlyPrinting:"En cours",queued:"En attente",history:"Historique"},status:{pending:"En attente",waiting:"En attente",printing:"Impression",paused:"En pause",completed:"Terminé",failed:"Échoué",skipped:"Sauté",cancelled:"Annulé"},summary:{printing:"Impressions",queued:"En attente",totalTime:"Temps total estimé",totalWeight:"Poids total estimé",history:"Historique"},filter:{allPrinters:"Toutes les imprimantes",unassigned:"Non assigné",allStatus:"Tous les statuts",allLocations:"Tous les emplacements",any:"Tout"},sort:{byPosition:"Par position",byName:"Par nom",byPrinter:"Par imprimante",bySchedule:"Par planification",byDate:"Par date",ascendingOldest:"Croissant (plus vieux)",descendingNewest:"Décroissant (plus récent)"},badges:{staged:"Préparé",requiresPrevious:"Nécessite succès précédent",autoPowerOff:"Extinction auto",gcodeInjection:"G-code"},empty:{title:"Aucune impression prévue",description:"Planifiez depuis les Archives ou glissez des fichiers ici."},time:{asap:"Dès que possible",overdue:"En retard",now:"Maintenant",lessThanMinute:"Dans moins d'une minute",inMinutes:"Dans {{count}} min",inHours:"Dans {{count}} heures"},actions:{stopPrint:"Arrêter",startPrint:"Démarrer",requeue:"Remettre en file"},bulkEdit:{title:"Modifier {{count}} élément",title_plural:"Modifier {{count}} éléments",description:"Seuls les changements seront appliqués.",printer:"Imprimante",noChange:"— Aucun changement —",queueOptions:"Options de file",staged:"Préparé (manuel)",autoPowerOff:"Extinction auto après",requirePrevious:"Requiert succès précédent",printOptions:"Options d'impression",bedLevelling:"Nivellement plateau",flowCalibration:"Calibration débit",vibrationCalibration:"Vibration (Input Shaper)",layerInspection:"Inspection 1ère couche",timelapse:"Timelapse",useAms:"Utiliser AMS",applyChanges:"Appliquer",selectAll:"Tout sélectionner",deselectAll:"Tout désélectionner",selected:"{{count}} sélectionnés",editSelected:"Modifier la sélection",cancelSelected:"Annuler la sélection"},confirm:{cancelTitle:"Annuler l'impression prévue",cancelMessage:'Annuler "{{name}}" ?',stopTitle:"Arrêter l'impression",stopMessage:`Arrêter "{{name}}" sur l'imprimante ?`,removeTitle:"Retirer de l'historique",removeMessage:`Retirer "{{name}}" de l'historique ?`,clearHistoryTitle:"Effacer l'historique",clearHistoryMessage:"Retirer les {{count}} éléments ?",cancelButton:"Annuler l'impression",stopButton:"Arrêter l'impression",thisPrint:"cette impression",thisItem:"cet élément"},toast:{cancelled:"Élément annulé",cancelFailed:"Échec annulation",removed:"Élément retiré",removeFailed:"Échec retrait",stopped:"Impression arrêtée",stopFailed:"Échec arrêt",released:"Libéré dans la file",startFailed:"Échec démarrage",reorderFailed:"Échec réorganisation",historyCleared:"{{count}} éléments effacés",clearHistoryFailed:"Échec effacement",updateFailed:"Échec mise à jour",bulkCancelled:"{{count}} éléments annulés",bulkCancelFailed:"Échec annulation"},timeline:{listView:"Liste",timelineView:"Chronologie",unassigned:"Non attribué",noData:"Aucune impression planifiée pour ce jour",allDoneBy:"Toutes les impressions terminées vers {{time}}",staged:"En attente",filterAll:"Tout afficher",filterPrinting:"En cours",filterQueued:"En file",time:{anyMoment:"imminent",minutesLeft:"{{minutes}}m restantes",hoursLeft:"{{hours}}h restantes",hoursMinutesLeft:"{{hours}}h {{minutes}}m restantes"},day:{previous:"Jour précédent",next:"Jour suivant",today:"Aujourd'hui"}},permissions:{noStopPrint:"Pas d'autorisation d'arrêt",noStartPrint:"Pas d'autorisation de démarrage",noEdit:"Pas d'autorisation de modification",noCancel:"Pas d'autorisation d'annulation",noRequeue:"Pas d'autorisation de remise en file",noRemove:"Pas d'autorisation de retrait",noClearHistory:"Pas d'autorisation historique",noEditItems:"Pas d'autorisation modification groupée",noCancelItems:"Pas d'autorisation annulation groupée"}},backgroundDispatch:{unknownFile:"Unknown file",unknownPrinter:"Unknown printer",startingPrints:"Starting prints",progressSummary:"{{complete}}/{{total}} complete • Dispatched: {{dispatched}} • Processing: {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Dismiss dispatch toast",cancelDispatchJob:"Cancel dispatch job",cancel:"Cancel",cancelling:"Cancelling…",awaitingPrinter:"En attente de l'imprimante…",status:{dispatched:"Dispatched",processing:"Processing",completed:"Completed",failed:"Failed",cancelled:"Cancelled"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Dispatch cancelled",cancelFailed:"Failed to cancel dispatch",completeWithFailures:"Background dispatch complete: {{completed}} succeeded, {{failed}} failed",completeSuccess:"Background dispatch complete: {{completed}} succeeded",printStartedRemaining:"{{completed}} impression(s) lancée(s), {{remaining}} en cours d'envoi..."}},stats:{title:"Tableau de bord",subtitle:"Glissez les widgets pour réorganiser. Cliquez sur l'œil pour masquer.",overview:"Vue d'ensemble",totalPrints:"Total impressions",successRate:"Taux de succès",totalPrintTime:"Temps total d'impression",printTime:"Temps d'impression",totalFilament:"Total filament utilisé",filamentUsed:"Filament utilisé",filamentCost:"Coût filament",totalCost:"Coût total",energyUsed:"Énergie consommée",energyCost:"Coût énergie",energyWarmingUpTooltip:"Le suivi énergétique collecte encore des instantanés horaires. Les totaux par période deviendront précis dès qu’un instantané existera avant la plage sélectionnée. Les premières valeurs peuvent être sous-estimées.",averagePrintTime:"Temps moyen par impression",printsPerDay:"Impressions par jour",byPrinter:"Par imprimante",printsByPrinter:"Impressions par imprimante",byMaterial:"Par matériau",byMonth:"Par mois",last7Days:"7 derniers jours",last30Days:"30 derniers jours",last90Days:"90 derniers jours",allTime:"Tout le temps",quickStats:"Stats rapides",printActivity:"Activité d'impression",filamentTypes:"Types de filament",filamentTrends:"Tendances filament",failureAnalysis:"Analyse des échecs",timeAccuracy:"Précision du temps",successful:"Succès :",failed:"Échecs :",perfectEstimate:"100% = estimation parfaite",noTimeAccuracyData:"Pas encore de données de précision",noFilamentData:"Aucune donnée de filament",noPrinterData:"Aucune donnée d'imprimante",noPrintData:"Aucune donnée d'impression",noPrintDataLast30Days:"Aucune impression ces 30 derniers jours",failureReasons:"Raisons des échecs",topFailureReasons:"Top raisons d'échec",failedPrintsCount:"{{failed}} / {{total}} impressions ont échoué",lastWeekRate:"Semaine dernière : {{rate}}%",resetLayout:"Réinitialiser la mise en page",recalculateCosts:"Recalculer les coûts",recalculateCostsHint:"Recalcule les coûts avec les prix actuels des filaments",exportStats:"Exporter les stats",exportAsCsv:"Exporter en CSV",exportAsExcel:"Exporter en Excel",hiddenCount:"{{count}} Masqués",exportDownloaded:"Export téléchargé",exportFailed:"Échec export",layoutReset:"Mise en page réinitialisée",recalculatedCosts:"Coûts recalculés pour {{count}} archives",recalculateFailed:"Échec du calcul",loadingStats:"Chargement des statistiques...",noPermissionResetLayout:"Pas d'autorisation de réinitialisation",noPermissionRecalculate:"Pas d'autorisation de recalcul",noPrintDataInRange:"Aucune donnée dans la période sélectionnée",periodFilament:"Filament utilisé",periodCost:"Coût",avgPerPrint:"Moy. par impression",usageOverTime:"Utilisation dans le temps",filamentByWeight:"Poids",printDuration:"Durée d'impression",printerUtilization:"Utilisation imprimante",filamentSuccess:"Succès par matériau",printHabits:"Habitudes d'impression",printTimeOfDay:"Heure d'impression",colorDistribution:"Distribution des couleurs",noColorData:"Aucune donnée de couleur disponible",records:"Records",longestPrint:"Plus longue impression",heaviestPrint:"Plus lourde impression",mostExpensivePrint:"Plus chère",busiestDay:"Jour le plus actif",successStreak:"Série de succès",streakPrint:"impression consécutive",streakPrints:"{{count}} impressions consécutives",printerStats:"Stats imprimante",hours:"heures",avgPrints:"Moy. impressions",noArchiveData:"Aucune donnée d'impression disponible",filamentByTime:"Temps",avgWeight:"Moy. poids",avgTime:"Moy. temps",filamentByPrints:"Impressions",timeframe:{today:"Aujourd'hui","this-week":"Cette semaine","this-month":"Ce mois","last-7":"7 derniers jours","last-30":"30 derniers jours","last-90":"90 derniers jours","this-year":"Cette année","all-time":"Tout",custom:"Personnalisé",from:"Du",to:"Au"},allUsers:"Tous les utilisateurs",noUser:"Aucun utilisateur (Système)",filterByUser:"Filtrer par utilisateur"},maintenance:{title:"Maintenance",overview:"Vue d'ensemble",allOk:"Toute la maintenance est à jour",dueCount:"{{count}} tâche à faire",dueCount_plural:"{{count}} tâches à faire",warningCount:"{{count}} avertissement",warningCount_plural:"{{count}} avertissements",totalPrintTime:"Temps d'impression total",nextMaintenance:"Prochaine maintenance",nothingDue:"Rien de prévu",tasks:"Tâches",lastPerformed:"Dernière réalisation",interval:"Intervalle",hoursRemaining:"{{hours}}h restantes",hoursOverdue:"{{hours}}h de retard",markDone:"Marquer comme fait",performMaintenance:"Effectuer la maintenance",history:"Historique",noHistory:"Aucun historique",editPrintHours:"Modifier les heures d'impression",currentHours:"Heures actuelles",statusTab:"Statut",settingsTab:"Paramètres",overdueCount:"{{count}} en retard",dueSoonCount:"{{count}} bientôt",dueSoon:"Bientôt",allGood:"Tout va bien",overdueBy:"Retard de {{duration}}",dueIn:"Dans {{duration}}",timeLeft:"{{duration}} restant",day:"1 jour",days:"{{count}} jours",week:"1 semaine",weeks:"{{count}} semaines",month:"1 mois",months:"{{count}} mois",year:"1 an",maintenanceTypes:"Types de maintenance",maintenanceTypesDescription:"Types système et tâches personnalisées",addCustomType:"Ajouter un type",restoreDefaults:"Restaurer les tâches par défaut",intervalType:"Type d'intervalle",intervalValue:"Intervalle ({{type}})",icon:"Icône",documentationLink:"Lien documentation (optionnel)",assignToPrinters:"Assigner aux imprimantes",selectAtLeastOnePrinter:"Sélectionnez au moins une imprimante",addType:"Ajouter le type",custom:"Personnalisé",printHours:"Heures d'impression",calendarDays:"Jours calendaires",exampleName:"ex: Remplacement filtre HEPA",viewDocumentation:"Voir documentation",timeBasedInterval:"Intervalle temporel",intervalOverrides:"Exceptions d'intervalle",intervalOverridesDescription:"Intervalles spécifiques par imprimante",assignedToPrinters:"Assigné aux imprimantes :",noPrintersAssigned:"Aucune imprimante assignée",addPrinterShort:"Ajouter :",printersAssignedClick:"{{count}} imprimante(s) assignée(s) - gérer",removeFromPrinter:"Retirer de cette imprimante",types:{lubricateCarbonRods:"Lubrifier les tiges carbone",lubricateRails:"Lubrifier les rails linéaires",cleanNozzle:"Nettoyer la buse / hotend",checkBelts:"Vérifier la tension des courroies",cleanBuildPlate:"Nettoyer le plateau",checkExtruder:"Vérifier les engrenages de l'extrudeur",checkCooling:"Vérifier les ventilateurs",generalInspection:"Inspection générale",cleanCarbonRods:"Nettoyer les tiges carbone",lubricateSteelRods:"Lubrifier les tiges en acier",cleanSteelRods:"Nettoyer les tiges en acier",cleanLinearRails:"Nettoyer les rails linéaires",checkPtfeTube:"Vérifier le tube PTFE",replaceHepaFilter:"Remplacer le filtre HEPA",replaceCarbonFilter:"Remplacer le filtre charbon",lubricateLeftNozzleRail:"Lubrifier le rail de buse gauche"},maintenanceComplete:"Maintenance marquée comme faite",typeUpdated:"Type mis à jour",typeDeleted:"Type supprimé",defaultsRestored:"{{count}} tâche(s) par défaut restaurée(s)",printHoursUpdated:"Heures mises à jour",printerAssigned:"Imprimante assignée",printerRemoved:"Imprimante retirée",deleteTypeConfirm:'Supprimer "{{name}}" ?',deleteSystemTypeTitle:"Supprimer la tâche de maintenance par défaut ?",deleteSystemTypeMessage:'Êtes-vous sûr de vouloir supprimer la tâche de maintenance par défaut "{{name}}" ?',noPermissionUpdate:"Pas d'autorisation de mise à jour",noPermissionPerform:"Pas d'autorisation d'action",noPermissionEditTypes:"Pas d'autorisation de modification types",noPermissionDeleteTypes:"Pas d'autorisation de suppression types",noPermissionEditHours:"Pas d'autorisation de modification heures",noPermissionRemovePrinter:"Pas d'autorisation retrait imprimante",noPermissionAssignPrinter:"Pas d'autorisation assignation",noPermissionEditIntervals:"Pas d'autorisation modification intervalles",configureSettings:"Configurer types et intervalles"},settings:{title:"Paramètres",general:"Général",tabs:{general:"Général",smartPlugs:"Prises connectées",notifications:"Notifications",queue:"Workflow",filament:"Filament",network:"Réseau",apiKeys:"Clés API",virtualPrinter:"Imprimante virtuelle",failureDetection:"Détection d'échec",users:"Authentification",backup:"Sauvegarde",emailAuth:"Authentification Email",ldap:"LDAP",twoFa:"Authentification 2FA",oidc:"SSO / OIDC",spoolbuddy:"SpoolBuddy"},ldap:{title:"Authentification LDAP",enabledDesc:"L'authentification LDAP est activée",disabledDesc:"L'authentification LDAP est désactivée",disabledHint:"Configurez et enregistrez les paramètres LDAP ci-dessous, puis activez.",enabled:"Authentification LDAP activée",disabled:"Authentification LDAP désactivée",feature1:"Les utilisateurs peuvent se connecter avec leurs identifiants LDAP",feature2:"Le compte administrateur local reste disponible en secours",feature3:"Les groupes LDAP sont associés aux groupes BamBuddy à la connexion",serverConfig:"Configuration du serveur LDAP",serverUrl:"URL du serveur",serverUrlHint:"Utilisez ldap:// pour standard ou ldaps:// pour les connexions SSL",security:"Sécurité",securityHint:"StartTLS met à niveau une connexion simple vers TLS. LDAPS utilise TLS dès le début.",bindDn:"DN de liaison (compte de service)",bindPassword:"Mot de passe de liaison",searchBase:"DN de base de recherche",userFilter:"Filtre de recherche utilisateur",userFilterHint:"{username} est remplacé par le nom d'utilisateur. Utilisez (uid={username}) pour OpenLDAP.",autoProvision:"Provisionnement automatique",autoProvisionHint:"Créer automatiquement un compte BamBuddy lors de la première connexion LDAP",defaultGroup:"Groupe par défaut",defaultGroupNone:"— Aucun (pas de repli) —",defaultGroupHint:"Groupe de repli attribué lorsqu'un utilisateur LDAP s'authentifie mais n'est dans aucun groupe LDAP mappé. Laissez vide pour laisser les utilisateurs non mappés sans autorisations.",groupMapping:"Mappage de groupes (JSON)",groupMappingHint:"Associer les DN de groupes LDAP aux groupes BamBuddy. Groupes disponibles : ",testConnection:"Tester la connexion",settingsSaved:"Paramètres LDAP enregistrés",errors:{serverRequired:"L'URL du serveur LDAP est requise",searchBaseRequired:"Le DN de base de recherche est requis",enableAuthFirst:"Activez d'abord l'authentification",configureLdapFirst:"Enregistrez d'abord les paramètres LDAP"}},email:{smtpSettings:"Configuration SMTP",smtpHost:"Serveur SMTP",smtpPort:"Port SMTP",security:"Sécurité",authentication:"Authentification",username:"Utilisateur",password:"Mot de passe",fromEmail:"Email expéditeur",fromName:"Nom expéditeur",testConnection:"Tester la connexion SMTP",testRecipient:"Email test destinataire",sendTest:"Envoyer email test",sending:"Envoi...",save:"Enregistrer les paramètres",saving:"Enregistrement...",advancedAuth:"Authentification avancée",advancedAuthEnabled:"L'authentification avancée est activée",advancedAuthEnabledDesc:"La gestion des utilisateurs par email est active. Les nouveaux utilisateurs recevront un mot de passe auto-généré.",advancedAuthDisabled:"Authentification avancée désactivée",advancedAuthDisabledDesc:"Activez pour les fonctionnalités liées à l'email (mot de passe oublié, etc).",enable:"Activer",disable:"Désactiver",feature1:"Génération auto et envoi de mots de passe par email",feature2:"Connexion par utilisateur ou email",feature3:"Réinitialisation mot de passe oublié disponible",feature4:"Réinitialisation admin par email",errors:{requiredFields:"Remplissez tous les champs requis",usernameRequired:"L'utilisateur est requis pour l'authentification",enterTestEmail:"Entrez une adresse email de test",smtpServerAndEmail:"Serveur et expéditeur requis pour le test",usernamePasswordRequired:"Utilisateur et mot de passe requis pour l'auth",configureSmtpFirst:"Configurez et testez le SMTP d'abord",enableAuthFirst:"Veuillez d'abord activer l'authentification pour utiliser les fonctionnalités basées sur le courrier électronique."},success:{settingsSaved:"Paramètres SMTP enregistrés"},securityOptions:{starttls:"STARTTLS (Port 587)",ssl:"SSL/TLS (Port 465)",none:"Aucun (Port 25)"},authOptions:{enabled:"Activée",disabled:"Désactivée"}},appearance:"Apparence",notifications:"Notifications",smartPlugs:"Prises connectées",spoolman:"Spoolman",updates:"Mises à jour",language:"Langue",languageDescription:"Choisissez votre langue",theme:"Thème",themeLight:"Clair",themeDark:"Sombre",themeSystem:"Système",defaultView:"Vue par défaut",defaultViewDescription:"Page affichée au démarrage",checkForUpdates:"Vérifier les mises à jour",autoUpdate:"Mise à jour auto",currentVersion:"Version actuelle",latestVersion:"Dernière version",upToDate:"Bambuddy est à jour",updateAvailable:"Mise à jour disponible",notificationLanguage:"Langue des notifications",notificationLanguageDescription:"Langue pour les notifications push",bedCooledThreshold:"Seuil de refroidissement du plateau",bedCooledThresholdDescription:"Température en dessous de laquelle le plateau est considéré comme refroidi",userNotificationsEnabled:"Notifications utilisateur",userNotificationsEnabledDescription:"Active le menu de notifications utilisateur et les notifications par e-mail pour les événements d'impression. Nécessite l'authentification avancée.",userNotificationsDisabledHint:"Activez l'authentification avancée pour utiliser les notifications utilisateur.",notificationProviders:"Fournisseurs de notifications",addProvider:"Ajouter un fournisseur",editProvider:"Modifier le fournisseur",providerType:"Type de fournisseur",testNotification:"Tester la notification",testSuccess:"Notification de test envoyée",testFailed:"Échec de l'envoi du test",quietHours:"Heures de silence",quietHoursDescription:"Ne pas déranger pendant ces heures",quietHoursStart:"Début",quietHoursEnd:"Fin",events:{title:"Événements de notification",printStart:"Impression démarrée",printComplete:"Impression terminée",printFailed:"Impression échouée",printStopped:"Impression arrêtée",printProgress:"Jalons de progression",printProgressDescription:"Notifier à 25%, 50%, 75%",printerOffline:"Imprimante hors ligne",printerError:"Erreur imprimante",filamentLow:"Filament bas",maintenanceDue:"Maintenance due",maintenanceDueDescription:"Notifier quand une tâche est due"},smartPlug:{title:"Prises connectées",add:"Ajouter une prise",edit:"Modifier la prise",name:"Nom",ipAddress:"Adresse IP",linkedPrinter:"Imprimante liée",autoOn:"Allumage auto",autoOnDescription:"Allumer au début de l'impression",autoOff:"Extinction auto",autoOffDescription:"Éteindre après l'impression",offDelay:"Délai d'extinction",offDelayMinutes:"Minutes après fin",offDelayTemp:"Quand la buse est sous",currentState:"État actuel",turnOn:"Allumer",turnOff:"Éteindre"},filamentTracking:"Suivi de Filament",filamentTrackingDesc:"Choisissez comment suivre vos bobines. Utilisez l'inventaire intégré ou connectez un serveur Spoolman.",filamentChecks:"Vérifications du filament",disableFilamentWarnings:"Désactiver les avertissements de filament",disableFilamentWarningsDesc:"Ne pas afficher les avertissements de filament insuffisant lors de l'impression ou de la mise en file d'attente",preferLowestFilament:"Préférer le filament le plus bas",preferLowestFilamentDesc:"Lorsque plusieurs bobines correspondent, utiliser celle avec le moins de filament restant",trackingModeBuiltIn:"Inventaire Intégré",trackingModeBuiltInDesc:"Correspondance RFID et suivi de consommation inclus",trackingModeSpoolmanDesc:"Serveur de gestion externe",builtInFeatureRfid:"Détecte auto les bobines RFID Bambu Lab dans l'AMS",builtInFeatureUsage:"Suit la consommation par impression",builtInFeatureCatalog:"Gère bobines, couleurs et profils facteur K",builtInFeatureThirdParty:"Les bobines tierces peuvent être assignées aux bobines d'inventaire",amsSyncButton:"Synchroniser les poids depuis l'AMS",amsSyncTitle:"Synchroniser les poids des bobines depuis l'AMS",amsSyncMessage:"Tous les poids des bobines de l'inventaire seront écrasés par les valeurs actuelles de l'AMS des imprimantes connectées. Utilisez ceci pour récupérer des données de poids corrompues. Les imprimantes doivent être en ligne.",amsSyncing:"Synchronisation...",amsSyncSuccess:"{{synced}} bobine(s) synchronisée(s), {{skipped}} ignorée(s)",amsSyncError:"Échec de la synchronisation des poids depuis l'AMS",spoolmanUrl:"URL Spoolman",spoolmanUrlHint:"URL de votre serveur Spoolman (ex: http://localhost:7912)",spoolmanConnected:"Connecté",spoolmanDisconnected:"Déconnecté",status:"Statut",connect:"Connecter",disconnect:"Déconnecter",howSyncWorks:"Fonctionnement de la Sync",syncInfoRfidOnly:"Seules les bobines officielles RFID sont synchronisées",syncInfoAutoCreate:"Les bobines sont créées dans Spoolman à la 1ère sync",syncInfoThirdPartySkipped:"Les bobines tierces ou rechargées sont ignorées",linkingExistingSpools:"Lier des bobines existantes",linkingExistingSpoolsDesc:'Pour lier une bobine Spoolman, survolez un slot AMS et cliquez sur "Lier à Spoolman".',syncMode:"Mode de Sync",syncModeAuto:"Automatique",syncModeManual:"Manuel uniquement",syncModeAutoDesc:"Sync auto lors de changements AMS",syncModeManualDesc:"Sync uniquement sur déclenchement manuel",syncAmsData:"Synchroniser AMS",syncAmsDataDesc:"Synchroniser manuellement les données vers Spoolman",allPrinters:"Toutes les imprimantes",noDefaultPrinter:"Aucune par défaut (demander à chaque fois)",sidebarOrder:"Ordre de la barre latérale",saveThumbnails:"Enregistrer les vignettes",captureFinishPhoto:"Prendre une photo à la fin",noPrintersConfigured:"Aucune imprimante configurée",archiveMode:{always:"Toujours créer une archive",never:"Ne jamais créer d'archive",ask:"Demander à chaque fois"},checkForUpdatesLabel:"Vérifier les mises à jour",checkPrinterFirmware:"Vérifier le firmware imprimante",includeBetaUpdates:"Inclure les versions bêta",includeBetaUpdatesDesc:"Notifier des versions bêta et préliminaires lors de la vérification des mises à jour",enableRetry:"Activer la rétentative",homeAssistantDescription:"Contrôler les prises via Home Assistant",environmentManagedLabel:"(Géré par l'environnement)",autoEnabledViaEnv:"Activé via variables d'environnement",urlFromEnvReadOnly:"Valeur HA_URL (lecture seule)",tokenFromEnvReadOnly:"Valeur HA_TOKEN (lecture seule)",mqttConnectedTo:"Connecté à",prometheusDescription:"Exposer les données au format Prometheus",noSmartPlugsTitle:"Aucune prise configurée",noSmartPlugsDescription:"Ajoutez une prise Tasmota pour suivre l'énergie et automatiser.",noProvidersTitle:"Aucun fournisseur configuré",noProvidersDescription:"Ajoutez un fournisseur pour recevoir des alertes.",noTemplatesAvailable:"Aucun modèle dispo. Redémarrez pour les générer.",apiPermissionView:"Voir statut et file",apiPermissionEdit:"Gérer la file d'attente",apiKeysEmptyTitle:"Aucune clé API",apiKeysEmptyDescription:"Créez une clé pour vos intégrations.",noUsersFound:"Aucun utilisateur trouvé",noGroupsFound:"Aucun groupe trouvé",noGroupsAvailable:"Aucun groupe disponible",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",systemGroupWarning:"Les noms des groupes système sont fixes",authDisabledTitle:"Authentification désactivée",authDisabledFeature1:"Requis pour accéder au système",authDisabledFeature2:"Gestion multi-utilisateurs et groupes",authDisabledFeature3:"Plus de 50 permissions granulaires",userHasCreated:"Cet utilisateur a créé :",userItemsQuestion:"Que faire de ces éléments ?",deleteUserConfirm:"Supprimer cet utilisateur ?",actionCannotBeUndone:"Cette action est irréversible.",addFirstSmartPlug:"Ajoutez votre première prise",providers:"Fournisseurs",log:"Journal",testAll:"Tout tester",testResults:"Résultats du test",testPassedCount:"{{count}} succès",testFailedCount:"{{count}} échecs",messageTemplates:"Modèles de message",messageTemplatesDescription:"Personnalisez les messages par événement.",apiKeys:"Clés API",apiKeysDescription:"Créez des clés pour webhooks et API.",createKey:"Créer une clé",apiKeyCreated:"Clé API créée avec succès",apiKeyCopyWarning:"Copiez cette clé maintenant - elle ne sera plus affichée !",useInApiBrowser:"Utiliser dans l'explorateur API",createNewApiKey:"Nouvelle clé API",keyName:"Nom de la clé",keyNamePlaceholder:"ex: Home Assistant, OctoPrint",readStatus:"Lire le statut",readStatusDescription:"Voir les imprimantes et la file",manageQueue:"Gérer la file",manageQueueDescription:"Ajouter/retirer des éléments",controlPrinter:"Contrôler l'imprimante",controlPrinterDescription:"Pause, reprise, arrêt",unnamedKey:"Clé sans nom",lastUsed:"Dernière utilisation",read:"Lecture",control:"Contrôle",createFirstKey:"Créez votre première clé",webhookEndpoints:"Points de terminaison Webhook",webhookApiKeyHint:"Utilisez la clé dans l'en-tête X-API-Key.",webhook:{getAllStatus:"Tous les statuts",getSpecificStatus:"Statut spécifique",addToQueue:"Ajouter à la file",pausePrint:"Pause",resumePrint:"Reprise",stopPrint:"Arrêt"},apiBrowser:"Explorateur API",apiBrowserDescription:"Testez les endpoints API.",apiKeyForTesting:"Clé API pour test",apiKeyPlaceholder:"Collez votre clé pour tester...",apiKeyHint:"Sera envoyée via l'en-tête X-API-Key.",deleteApiKeyTitle:"Supprimer la clé API",deleteApiKeyMessage:"Les intégrations utilisant cette clé cesseront de fonctionner.",deleteKey:"Supprimer la clé",amsDisplayThresholds:"Seuils d'affichage AMS",amsThresholdsDescription:"Seuils de couleur pour humidité et température.",humidity:"Humidité",goodGreen:"Bon (vert)",fairOrange:"Moyen (orange)",aboveFairBad:"Au-dessus = rouge (mauvais)",fairAlsoDryingThreshold:"Ce seuil est aussi utilisé pour déclencher le séchage automatique",temperature:"Température",goodBlue:"Bon (bleu)",aboveFairHot:"Au-dessus = rouge (chaud)",historyRetention:"Rétention d'historique",keepSensorHistory:"Garder l'historique pendant",historyRetentionDescription:"Les anciennes données seront supprimées.",defaultPrintOptions:"Options d'impression par défaut",defaultPrintOptionsDescription:"Définir les valeurs par défaut des options d'impression. Modifiables dans la boîte de dialogue d'impression.",defaultBedLevelling:"Nivellement du lit",defaultBedLevellingDesc:"Niveler automatiquement le lit avant l'impression",defaultFlowCali:"Calibration du flux",defaultFlowCaliDesc:"Calibrer le flux d'extrusion",defaultVibrationCali:"Calibration des vibrations",defaultVibrationCaliDesc:"Réduire les artefacts de ringing",defaultLayerInspect:"Inspection première couche",defaultLayerInspectDesc:"Inspection IA de la première couche",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Enregistrer une vidéo timelapse",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Confirmation de plateau libre",requirePlateClear:"Exiger la confirmation de plateau libre",requirePlateClearDescription:"Lorsque cette option est activée, le planificateur attend une confirmation de plateau libre par imprimante avant de lancer les impressions en file d'attente sur les imprimantes ayant terminé. La désactiver masque également le badge d'état du plateau et le bouton « Marquer le plateau comme dégagé » sur les cartes d'imprimante.",gcodeInjection:"Injection de G-code",gcodeInjectionDescription:"Configurez du G-code personnalisé à injecter au début et/ou à la fin des impressions pour les systèmes d'auto-impression comme Farmloop, SwapMod, AutoClear et Printflow 3D. Les snippets sont configurés par modèle d'imprimante et appliqués lorsque « Injecter le G-code » est activé sur un élément de file d'attente.",gcodeInjectionNoPrinters:"Aucune imprimante trouvée. Ajoutez des imprimantes pour configurer les snippets G-code.",gcodeStartLabel:"G-code de début",gcodeEndLabel:"G-code de fin",gcodeStartPlaceholder:"G-code ajouté avant le début de l'impression...",gcodeEndPlaceholder:"G-code ajouté après la fin de l'impression...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Séchage automatique",queueDryingDescription:"Sécher automatiquement le filament AMS lorsque l'imprimante est inactive entre les impressions. Utilise le seuil d'humidité ci-dessus.",queueDryingEnabled:"Activer le séchage automatique",queueDryingEnabledDescription:"Démarrer le séchage AMS automatiquement lorsque l'imprimante est inactive et l'humidité dépasse le seuil",queueDryingBlock:"Attendre la fin du séchage",queueDryingBlockDescription:"Bloquer la file d'attente jusqu'à la fin du séchage. Désactivé, les impressions sont prioritaires.",ambientDryingEnabled:"Séchage ambiant",ambientDryingEnabledDescription:"Sécher automatiquement le filament sur les imprimantes inactives lorsque l'humidité dépasse le seuil, même sans impressions en file.",dryingPresets:"Préréglages de séchage",dryingPresetsDescription:"Température et durée par type de filament. AMS 2 Pro utilise des températures plus basses, AMS-HT supporte des températures plus élevées.",dryingFilament:"Filament",printModal:"Fenêtre d'impression",expandCustomMapping:"Étendre le mapping personnalisé par défaut",expandCustomMappingDescription:"Affiche le mapping AMS par imprimante étendu.",authentication:"Authentification",authEnabledDescription:"L'instance est sécurisée",authDisabledDescription:"Activez pour restreindre l'accès",authDisabledMessage:"Activez l'authentification pour gérer comptes et permissions.",enableAuthentication:"Activer l'authentification",currentUser:"Utilisateur actuel",changePassword:"Changer le mot de passe",admin:"Admin",users:"Utilisateurs",addUser:"Ajouter un utilisateur",groups:"Groupes",addGroup:"Ajouter un groupe",system:"Système",noDescription:"Pas de description",userCount:"{{count}} utilisateurs",permissionCount:"{{count}} permissions",createUser:"Créer un utilisateur",username:"Nom d'utilisateur",enterUsername:"Entrez l'utilisateur",password:"Mot de passe",enterPassword:"Mot de passe (min 6 char)",confirmPassword:"Confirmer le mot de passe",confirmPasswordPlaceholder:"Confirmez le mot de passe",viewReleaseOnGitHub:"Voir la version sur GitHub",turnAllPlugsOn:"Tout allumer",turnAllPlugsOff:"Tout éteindre",clearNotificationLogs:"Effacer les journaux",clearLogsMessage:"Efface définitivement les logs de plus de 30 jours.",clearLogs:"Effacer les logs",resetUiPreferences:"Réinitialiser l'UI",resetUiPreferencesMessage:"Réinitialise l'ordre, thème, widgets, etc. N'affecte pas vos données.",resetPreferences:"Réinitialiser",deleteGroupTitle:"Supprimer le groupe",deleteGroupMessage:"Les utilisateurs de ce groupe perdront ces permissions.",deleteGroup:"Supprimer le groupe",disableAuthenticationTitle:"Désactiver l'authentification",disableAuthenticationMessage:"Instance accessible sans connexion. Les comptes sont conservés.",disableAuthentication:"Désactiver",configureBambuddy:"Configurer Bambuddy",systemDefault:"Défaut système",archiveSettings:"Réglages Archives",newWindow:"Nouvelle fenêtre",embeddedOverlay:"Superposition intégrée",preferredSlicer:"Slicer préféré",preferredSlicerDescription:"Application pour ouvrir les fichiers",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"Caméras externes",costTracking:"Suivi des coûts",printsOnly:"Impressions uniquement",totalConsumption:"Consommation totale",dataManagement:"Gestion des données",storageUsage:"Utilisation du stockage",storageUsageDescription:"Répartition de l'utilisation des données par catégorie",storageUsageTotal:"Total",storageUsageErrors:"Erreurs",storageUsageOtherBreakdown:"Autre (inclut ressources statiques, scripts et fichiers de configuration)",storageUsageSystem:"Système",storageUsageData:"Données",storageUsageUnavailable:"Informations d'utilisation du stockage non disponibles",clearNotificationLogsDescription:"Supprimer logs de plus de 30 jours",resetUiPreferencesDescription:"Réinitialise thèmes et affichage sans toucher aux données.",enableHomeAssistant:"Activer Home Assistant",enableMqtt:"Activer MQTT",useTls:"Utiliser TLS",enableMetricsEndpoint:"Activer l'endpoint Metrics",availableMetrics:"Metrics disponibles",editUser:"Modifier l'utilisateur",deleteUserTitle:"Supprimer l'utilisateur",groupName:"Nom du groupe",leaveEmptyForAnonymous:"Vide pour anonyme",leaveEmptyForNoAuth:"Vide si pas d'auth",enterNewPassword:"Nouveau mot de passe",confirmNewPassword:"Confirmer nouveau mdp",enterGroupName:"Entrez le nom du groupe",enterDescriptionOptional:"Description (optionnel)",enterCurrentPassword:"Mdp actuel",enterNewPasswordMin6:"Nouveau mdp (min 6 char)",toast:{keyCopied:"Clé copiée",copyFailed:"Échec copie",keyAddedToBrowser:"Clé ajoutée à l'explorateur",clearLogsFailed:"Échec effacement logs",uiPreferencesReset:"Préférences UI réinitialisées. Rafraîchissement...",authDisabled:"Authentification désactivée",authDisableFailed:"Échec désactivation",apiKeyCreated:"Clé API créée",apiKeyDeleted:"Clé API supprimée",userCreated:"Utilisateur créé",userUpdated:"Utilisateur mis à jour",userDeleted:"Utilisateur supprimé",groupCreated:"Groupe créé",groupUpdated:"Groupe mis à jour",groupDeleted:"Groupe supprimé",fillRequiredFields:"Remplissez les champs requis",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères",enterGroupName:"Entrez un nom de groupe",settingsSaved:"Paramètres enregistrés",noPermissionUpdate:"Vous n'avez pas l'autorisation de modifier les paramètres",cameraSettingsSaved:"Réglages caméra enregistrés",enterCameraUrl:"Entrez une URL caméra",passwordChanged:"Mot de passe modifié",connectionFailed:"Échec connexion",testFailed:"Échec test",cameraConnected:"Caméra connectée {{resolution}}"},testConnection:"Tester la connexion",catalog:{spoolCatalog:"Catalogue de Bobines",spoolCatalogDescription:"Poids des bobines vides par marque/type. Utilisé pour le calcul auto du poids restant.",searchCatalog:"Chercher dans le catalogue...",addNewEntry:"Nouvelle Entrée",namePlaceholder:"Nom (ex: Bambu Lab - Plastique)",weight:"Poids",type:"Type",default:"Défaut",custom:"Perso",noMatch:"Aucune entrée correspondante",empty:"Catalogue vide",deleteEntry:"Supprimer l'entrée",deleteConfirm:'Supprimer "{{name}}" ?',resetCatalog:"Réinitialiser le catalogue",resetConfirm:"Réinitialiser aux valeurs par défaut ? Vos entrées personnalisées seront supprimées.",loadFailed:"Échec chargement catalogue",nameWeightRequired:"Nom et poids requis",entryAdded:"Entrée ajoutée",addFailed:"Échec ajout",entryUpdated:"Entrée mise à jour",updateFailed:"Échec mise à jour",entryDeleted:"Entrée supprimée",deleteFailed:"Échec suppression",resetSuccess:"Catalogue réinitialisé",resetFailed:"Échec réinitialisation",exported:"{{count}} entrées exportées",imported:"{{added}} entrées importées ({{skipped}} ignorées)",importFailed:"Échec import : format JSON invalide",exportTooltip:"Exporter en JSON",importTooltip:"Importer depuis JSON",resetTooltip:"Réinitialiser par défaut",selectedCount:"{{count}} sélectionnés",deleteSelected:"Supprimer la sélection",bulkDeleteConfirm:"Supprimer {{count}} entrées ?",bulkDeleted:"{{count}} entrées supprimées",bulkDeleteFailed:"Échec de la suppression"},colorCatalog:{title:"Catalogue de Couleurs",description:"Couleurs de filament par fabricant. Utilisé pour la recherche auto lors de l'ajout de bobines.",searchColors:"Chercher couleurs...",allManufacturers:"Tous les fabricants",addNewColor:"Nouvelle Couleur",manufacturer:"Fabricant",colorName:"Nom couleur",hex:"Hex",materialOptional:"Matériau (optionnel)",showing:"Affichage {{filtered}} sur {{total}} couleurs",noMatch:"Aucune couleur correspondante",empty:"Catalogue vide",deleteColor:"Supprimer couleur",deleteConfirm:'Supprimer "{{name}}" ?',resetCatalog:"Réinitialiser catalogue couleurs",resetConfirm:"Réinitialiser aux valeurs par défaut ?",sync:"Sync",starting:"Démarrage...",syncTooltip:"Sync depuis FilamentColors.xyz (2000+ couleurs, peut être long)",loadFailed:"Échec chargement catalogue couleurs",fieldsRequired:"Fabricant, nom et code Hex requis",colorAdded:"Couleur ajoutée",addFailed:"Échec ajout",colorUpdated:"Couleur mise à jour",updateFailed:"Échec mise à jour",colorDeleted:"Couleur supprimée",deleteFailed:"Échec suppression",resetSuccess:"Catalogue réinitialisé",resetFailed:"Échec réinitialisation",syncUpToDate:"Déjà à jour ({{count}} couleurs vérifiées)",syncComplete:"{{added}} couleurs ajoutées ({{skipped}} déjà présentes)",syncError:"Erreur de sync",syncFailed:"Échec sync FilamentColors.xyz",exported:"{{count}} couleurs exportées",imported:"{{added}} couleurs importées ({{skipped}} ignorées)",importFailed:"Échec import : format JSON invalide",selectedCount:"{{count}} sélectionnés",deleteSelected:"Supprimer la sélection",bulkDeleteConfirm:"Supprimer {{count}} couleurs ?",bulkDeleted:"{{count}} couleurs supprimées",bulkDeleteFailed:"Échec de la suppression des couleurs"},dateFormat:"Format de date",dateFormatUs:"US (MM/JJ/AAAA)",dateFormatEu:"EU (JJ/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-JJ)",timeFormat:"Format horaire",timeFormat12:"12 heures (3:30 PM)",timeFormat24:"24 heures (15:30)",defaultPrinter:"Imprimante par défaut",defaultPrinterDescription:"Présélectionner cette imprimante pour les téléversements, réimpressions et autres opérations.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Glissez les éléments dans la barre latérale pour réorganiser. Réinitialiser l'ordre par défaut ici.",setDefault:"Définir par défaut",sidebarOrderSetDefaultHint:"Définir par défaut applique l'ordre actuel du menu aux utilisateurs qui n'ont pas encore personnalisé le leur.",sidebarDefaultSet:"L'ordre du menu par défaut a été défini.",sidebarDefaultCleared:"Ordre du menu par défaut effacé.",sidebarDefaultFailed:"Échec de la définition de l'ordre du menu par défaut.",reset:"Réinitialiser",darkMode:"Mode sombre",lightMode:"Mode clair",active:"(actif)",background:"Arrière-plan",accent:"Accent",style:"Style",bgNeutral:"Neutre",bgWarm:"Chaud",bgCool:"Froid",bgOled:"OLED Noir",bgSlate:"Bleu ardoise",bgForest:"Vert forêt",accentGreen:"Vert",accentTeal:"Sarcelle",accentBlue:"Bleu",accentOrange:"Orange",accentPurple:"Violet",accentRed:"Rouge",styleClassic:"Classique",styleGlow:"Lumineux",styleVibrant:"Vibrant",themeToggleHint:"Basculer entre le mode sombre et clair avec l'icône soleil/lune dans la barre latérale.",autoArchivePrints:"Archiver automatiquement les impressions",autoArchiveDescription:"Sauvegarder automatiquement les fichiers 3MF à la fin des impressions",saveThumbnailsDescription:"Extraire et sauvegarder les images d'aperçu des fichiers 3MF",captureFinishPhotoDescription:"Prendre une photo avec la caméra de l'imprimante à la fin de l'impression",ffmpegNotInstalled:"ffmpeg non installé",ffmpegRequired:"La capture caméra nécessite ffmpeg. Installez-le via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).",camera:"Caméra",cameraViewMode:"Mode d'affichage caméra",cameraOverlayDescription:"La caméra s'ouvre dans un overlay redimensionnable sur l'écran principal",cameraWindowDescription:"La caméra s'ouvre dans une fenêtre de navigateur séparée",externalCamerasDescription:"Configurer des caméras externes pour remplacer la caméra intégrée. Supporte les flux MJPEG, RTSP, snapshots HTTP et caméras USB (V4L2). Lorsqu'activée, la caméra externe est utilisée pour la vue en direct et les photos de fin.",cameraPlaceholderUsb:"Chemin du périphérique (/dev/video0)",cameraPlaceholderUrl:"URL caméra (rtsp://... ou http://...)",cameraTypeMjpeg:"Flux MJPEG",cameraTypeRtsp:"Flux RTSP",cameraTypeSnapshot:"Snapshot HTTP",cameraTypeUsb:"Caméra USB (V4L2)",cameraRotation:"Rotation",test:"Tester",connected:"Connecté",disconnected:"Déconnecté",currency:"Devise",defaultFilamentCost:"Coût filament par défaut (par kg)",electricityCost:"Coût électricité par kWh",energyDisplayMode:"Mode d'affichage énergie",energyModePrintDescription:"Le tableau de bord affiche la somme de l'énergie utilisée pendant les impressions",energyModeTotalDescription:"Le tableau de bord affiche l'énergie totale des prises connectées",fileManager:"Gestionnaire de fichiers",createArchiveEntry:"Créer une entrée d'archive lors de l'impression",createArchiveEntryDescription:"Lors de l'impression depuis le gestionnaire de fichiers, créer optionnellement une entrée d'archive",lowDiskSpaceWarning:"Avertissement espace disque faible",lowDiskSpaceDescription:"Afficher un avertissement lorsque l'espace disque libre descend sous ce seuil",printerFirmware:"Firmware imprimante",checkFirmwareDescription:"Vérifier les mises à jour firmware de Bambu Lab",bambuddySoftware:"Logiciel Bambuddy",autoCheckDescription:"Vérifier automatiquement les nouvelles versions au démarrage",checkNow:"Vérifier maintenant",updateAvailableVersion:"Mise à jour disponible : v{{version}}",releaseNotes:"Notes de version",updateViaDocker:"Mettre à jour via Docker Compose :",updateViaHomeAssistant:"Les mises à jour sont gérées par le superviseur Home Assistant. Ouvrez Paramètres → Modules complémentaires → Bambuddy dans Home Assistant pour installer la nouvelle version.",installUpdate:"Installer la mise à jour",latestVersionRunning:"Vous utilisez la dernière version",failedToCheckUpdates:"Échec de la vérification des mises à jour : {{error}}",backupRestore:"Sauvegarde & Restauration",backupRestoreDescription:"Exporter/importer les paramètres et configurer la sauvegarde GitHub",goToBackup:"Aller à la sauvegarde",externalUrl:"URL externe",externalUrlDescription:"L'URL externe où Bambuddy est accessible. Utilisée pour les images de notification et les intégrations externes.",bambuddyUrl:"URL Bambuddy",externalUrlHint:"Inclure le protocole et le port (ex : http://192.168.1.100:8000)",ftpRetry:"Réessai FTP",ftpRetryDescription:"Réessayer les opérations FTP lorsque le WiFi de l'imprimante est instable. S'applique aux téléchargements 3MF, uploads d'impression, téléchargements timelapse et mises à jour firmware.",autoRetryDescription:"Réessayer automatiquement les opérations FTP échouées",retryAttempts:"Tentatives de réessai",retryDelay:"Délai de réessai",connectionTimeout:"Délai de connexion",time_one:"{{count}} fois",time_other:"{{count}} fois",second_one:"{{count}} seconde",second_other:"{{count}} secondes",nSeconds:"{{count}} secondes",increaseForWeakWifi:"Augmenter pour les imprimantes avec un WiFi faible",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Se connecter à Home Assistant pour contrôler les prises connectées via l'API REST HA. Supporte les entités switch, light, input_boolean et script.",homeAssistantUrl:"URL Home Assistant",longLivedAccessToken:"Token d'accès longue durée",haTokenHint:"Créer un token dans HA : Profil → Tokens d'accès longue durée → Créer un token",connectionSuccessful:"Connexion réussie",connectionFailed:"Connexion échouée",haConnectionSuccess:"Connexion à Home Assistant réussie.",haConnectionFailed:"Échec de la connexion à Home Assistant.",mqttPublishing:"Publication MQTT",mqttDescription:"Publier les événements BamBuddy vers un broker MQTT externe pour l'intégration avec Node-RED, Home Assistant et d'autres systèmes d'automatisation.",mqttEnableDescription:"Publier les événements vers un broker MQTT externe",brokerHostname:"Nom d'hôte du broker",port:"Port",usernameOptional:"Nom d'utilisateur (optionnel)",passwordOptional:"Mot de passe (optionnel)",topicPrefix:"Préfixe de topic",topicPrefixHint:"Les topics seront : {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Métriques Prometheus",prometheusEndpointDescription:"Exposer les métriques imprimante sur <code>/api/v1/metrics</code> pour la surveillance Prometheus/Grafana.",bearerTokenOptional:"Token Bearer (optionnel)",bearerTokenHint:"Si défini, les requêtes doivent inclure <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"État de connexion",metricsPrinterState:"État imprimante (idle/printing/etc)",metricsPrintProgress:"Progression impression 0-100%",metricsBedTemp:"Température du plateau",metricsNozzleTemp:"Température de la buse",metricsPrintsTotal:"Total impressions par résultat",metricsMore:"...et plus (couches, ventilateurs, file d'attente, utilisation filament)",smartPlugsDescription:"Connecter des prises connectées (Tasmota ou Home Assistant) pour automatiser le contrôle de l'alimentation et suivre la consommation d'énergie de vos imprimantes.",allOn:"Tout allumer",allOff:"Tout éteindre",addSmartPlug:"Ajouter une prise",energySummary:"Résumé énergétique",currentPower:"Puissance actuelle",plugsOnline:"{{reachable}}/{{total}} prises en ligne",today:"Aujourd'hui",yesterday:"Hier",total:"Total",enablePlugsForSummary:"Activer les prises pour voir le résumé énergétique",addNotificationProvider:"Ajouter",systemBadge:"(Système)",creating:"Création...",changing:"Modification...",deleteUserAndItems:"Supprimer l'utilisateur ET ses éléments",deleteUserKeepItems:"Supprimer l'utilisateur, garder les éléments (deviennent sans propriétaire)",ok:"OK",twoFa:{totpTitle:"Application Authenticator (TOTP)",totpDesc:"Utilisez une application comme Google Authenticator, Aegis ou Authy.",emailOtpTitle:"OTP par e-mail",emailOtpDesc:"Envoyez un code à usage unique à {{email}} lors de la connexion.",emailOtpNoEmail:"Ajoutez une adresse e-mail à votre compte pour activer cette méthode.",addEmailFirst:"Votre compte n'a pas d'adresse e-mail. Demandez à un administrateur d'en ajouter une.",setupTotp:"Configurer l'application Authenticator",setupAuthApp:"Configurer l'application Authenticator",setupInstructions:"Scannez le QR code avec votre application authenticator, puis confirmez avec un code.",manualEntry:"Impossible de scanner ? Entrez ce secret manuellement :",scannedContinue:"Code scanné — continuer",enterCodeToConfirm:"Entrez le code à 6 chiffres de votre application authenticator pour confirmer.",activate:"Activer",disableTotp:"Désactiver l'Authenticator",disableConfirmHint:"Entrez un code TOTP valide ou un code de secours pour désactiver l'authenticator.",totpDisabled:"Application Authenticator désactivée.",emailOtpEnabled:"OTP par e-mail activé.",emailOtpDisabled:"OTP par e-mail désactivé.",smtpRequired:"Veuillez d'abord configurer et tester les paramètres SMTP.",invalidCode:"Code invalide. Veuillez réessayer.",enableEmailOtp:"Activer OTP par e-mail",disableEmailOtp:"Désactiver OTP par e-mail",emailSetupEnterCode:"Un code de vérification a été envoyé à votre adresse e-mail. Entrez-le ci-dessous pour confirmer que vous possédez cette boîte de réception.",verifyAndEnable:"Vérifier et activer",emailDisablePasswordHint:"Entrez le mot de passe de votre compte pour confirmer la désactivation de l'OTP par e-mail.",passwordPlaceholder:"Entrez votre mot de passe",backupCodesTitle:"Sauvegardez vos codes de secours",backupCodesWarning:"Conservez ces codes en lieu sûr. Chaque code ne peut être utilisé qu'une seule fois et ne sera plus affiché.",backupCodesRemaining:"{{count}} codes de secours restants",savedCodes:"Codes sauvegardés",regenBackup:"Régénérer les codes de secours",regenBackupHint:"Entrez votre code TOTP actuel pour générer 10 nouveaux codes de secours. Tous les codes existants seront invalidés.",newBackupCodes:"Nouveaux codes de secours",linkedAccounts:"Comptes SSO liés",linkedAccountsDesc:"Ces fournisseurs d'identité externes sont liés à votre compte.",oidcUnlinked:"Compte dissocié."},oidc:{title:"Fournisseurs SSO / OIDC",desc:"Configurez des fournisseurs OpenID Connect pour l'authentification unique.",addProvider:"Ajouter un fournisseur",newProvider:"Nouveau fournisseur",empty:"Aucun fournisseur OIDC configuré.",created:"Fournisseur créé.",updated:"Fournisseur mis à jour.",deleted:"Fournisseur supprimé.",deleteTitle:"Supprimer le fournisseur",deleteMessage:'Supprimer "{{name}}" ? Tous les comptes liés seront déconnectés.',form:{name:"Nom d'affichage",issuerUrl:"URL de l'émetteur",clientId:"ID client",clientSecret:"Secret client",scopes:"Scopes",iconUrl:"URL de l'icône (optionnel)",enabled:"Activé",autoCreate:"Créer les utilisateurs automatiquement",autoCreateDesc:"Crée automatiquement un compte local lors de la première connexion.",autoLink:"Lier automatiquement les comptes existants",autoLinkDesc:"Lie les comptes locaux existants par e-mail lors de la première connexion.",secretHint:"laisser vide pour conserver",secretPlaceholder:"nouveau secret",emailClaim:"Claim e-mail",emailClaimDesc:"Claim JWT utilisé comme identité e-mail. Utiliser 'preferred_username' ou 'upn' pour Azure Entra ID (qui n'envoie pas email_verified). Utiliser uniquement des noms de claims de confiance.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"Exiger la vérification e-mail",requireEmailVerifiedDesc:"N'accepter le claim e-mail que si le fournisseur le marque comme vérifié.",requireEmailVerifiedWarning:"Avertissement : l'e-mail sera accepté sans vérification. À utiliser uniquement avec des fournisseurs de confiance.",requireEmailVerifiedAutoLink:"Désactiver le lien automatique d'abord pour modifier ce paramètre."}},spoolbuddy:{infoTitle:"Périphériques SpoolBuddy",infoBody:"Les bornes SpoolBuddy s'enregistrent automatiquement via heartbeat. Désinscrivez ici un appareil qui n'est plus utilisé ou un doublon obsolète laissé par un crash du daemon.",duplicatesTitle:"{{count}} appareils enregistrés",duplicatesBody:"Seul le premier appareil enregistré est utilisé par l'interface du kiosk. Si l'un de ces appareils est un doublon obsolète issu d'un crash, désinscrivez-le — un appareil en ligne se ré-enregistrera automatiquement au prochain heartbeat.",empty:"Aucun appareil SpoolBuddy enregistré pour le moment.",online:"En ligne",offline:"Hors ligne",unregister:"Désinscrire",unregisterSuccess:"Appareil désinscrit",unregisterError:"Échec de la désinscription",confirmTitle:"Désinscrire l'appareil SpoolBuddy ?",confirmBody:`Cela retirera "{{hostname}}" ({{deviceId}}) de la base de données. Si l'appareil est en ligne, il se ré-enregistrera automatiquement au prochain heartbeat.`,ipAddress:"Adresse IP",firmware:"Firmware",lastSeen:"Dernière activité",daemonUptime:"Uptime du daemon",systemUptime:"Uptime système",never:"jamais",nfc:"NFC",scale:"Balance",cpuTemp:"Temp. CPU",memory:"Mémoire",disk:"Disque",update:"Mettre à jour",updateConfirmTitle:"Mettre à jour le daemon Spoolbuddy ?",updateConfirmBody:'Déclencher une mise à jour logicielle sur "{{hostname}}" ? Le daemon redémarrera une fois la mise à jour appliquée.',restartBrowser:"Redémarrer le navigateur",restartBrowserConfirmTitle:"Redémarrer le navigateur du kiosk ?",restartBrowserConfirmBody:`Redémarrer le navigateur du kiosk sur "{{hostname}}" ? L'écran sera momentanément vide.`,restartDaemon:"Redémarrer le daemon",restartDaemonConfirmTitle:"Redémarrer le daemon Spoolbuddy ?",restartDaemonConfirmBody:`Redémarrer le daemon Spoolbuddy sur "{{hostname}}" ? L'appareil sera hors ligne quelques secondes.`,reboot:"Redémarrer",rebootConfirmTitle:"Redémarrer l'appareil ?",rebootConfirmBody:`Redémarrer "{{hostname}}" ? L'appareil sera hors ligne pendant environ une minute.`,shutdown:"Éteindre",shutdownConfirmTitle:"Éteindre l'appareil ?",shutdownConfirmBody:`Éteindre "{{hostname}}" ? Vous aurez besoin d'un accès physique pour le rallumer.`,commandConfirm:"Confirmer",commandQueued:"Commande en file d'attente",commandError:"Échec de l'envoi de la commande"}},notification:{printStarted:{title:"Impression démarrée",body:"{{printer}} : {{filename}} commence l'impression"},printCompleted:{title:"Impression terminée",body:"{{printer}} : {{filename}} a réussi"},printFailed:{title:"Impression échouée",body:"{{printer}} : {{filename}} a échoué"},printStopped:{title:"Impression arrêtée",body:"{{printer}} : {{filename}} a été arrêtée"},printProgress:{title:"Progression d'impression",body:"{{printer}} : {{filename}} est à {{percent}}%"},printerOffline:{title:"Imprimante hors ligne",body:"{{printer}} est déconnectée"},printerError:{title:"Erreur imprimante",body:"{{printer}} : {{error}}"},filamentLow:{title:"Filament bas",body:"{{printer}} : Le filament est presque vide"},maintenanceDue:{title:"Maintenance due",body:"{{printer}} : {{items}} demandent votre attention"}},errors:{generic:"Une erreur est survenue",networkError:"Erreur réseau. Vérifiez votre connexion.",notFound:"Non trouvé",unauthorized:"Non autorisé",serverError:"Erreur serveur",validationError:"Vérifiez vos saisies",printerConnectionFailed:"Échec connexion imprimante",saveFailed:"Échec enregistrement",deleteFailed:"Échec suppression",loadFailed:"Échec chargement"},hmsErrors:{title:"Erreurs - {{name}}",noErrors:"Aucune erreur",viewOnWiki:"Voir sur le Wiki Bambu Lab",clearInstructions:"Effacez les erreurs sur l'imprimante pour les retirer ici.",clearErrors:"Effacer les erreurs",clearSuccess:"Erreurs HMS effacées",clearFailed:"Échec de l'effacement des erreurs HMS"},mqttDebug:{title:"Journal de débogage MQTT",searchPlaceholder:"Chercher topic ou message...",noMessages:"Aucun message enregistré",startLoggingHint:'Cliquez sur "Démarrer" pour capturer les messages MQTT',noMessagesMatch:"Aucun message ne correspond",adjustFilterHint:"Ajustez votre recherche",incoming:"Entrant",outgoing:"Sortant",loggingStopped:"Enregistrement arrêté",loggingActive:"Enregistrement actif - rafraîchissement auto",startLogging:"Démarrer",stopLogging:"Arrêter",clearLog:"Effacer le journal",topic:"Topic",timestamp:"Horodatage",direction:"Direction",all:"Tous"},printerFiles:{title:"Gestionnaire de fichiers",storageUsed:"Utilisé :",storageFree:"Libre :",filterPlaceholder:"Filtrer les fichiers...",deleteButton:"Supprimer",deleteFiles:"Supprimer {{count}} fichiers",deleteFileConfirm:'Supprimer "{{name}}" ?',deleteFilesConfirm:"Supprimer les {{count}} fichiers sélectionnés ?",noFiles:"Aucun fichier sur l'imprimante",loadingFiles:"Chargement...",failedToLoad:"Échec chargement fichiers",toast:{filesDeleted:"{{count}} fichier(s) supprimé(s)",deleteFailed:"Échec suppression : {{error}}"}},confirm:{delete:"Voulez-vous vraiment supprimer cet élément ?",unsavedChanges:"Changements non sauvegardés. Voulez-vous quitter ?",clearQueue:"Voulez-vous vraiment vider la file d'attente ?"},login:{title:"Connexion Bambuddy",subtitle:"Connectez-vous à votre compte",username:"Utilisateur",usernamePlaceholder:"Entrez votre utilisateur",usernameOrEmail:"Utilisateur ou Email",usernameOrEmailPlaceholder:"Utilisateur ou @ Email",password:"Mot de passe",passwordPlaceholder:"Entrez votre mot de passe",signIn:"Se connecter",signingIn:"Connexion...",rememberMe:"Se souvenir de moi",forgotPassword:"Mot de passe oublié ?",loginSuccess:"Connecté avec succès",loginFailed:"Échec de connexion",enterCredentials:"Entrez vos identifiants",enterEmail:"Veuillez entrer votre adresse e-mail",oidcLoginFailed:"Échec de la connexion OIDC",oidcErrors:{providerError:"Le fournisseur d'identité a renvoyé une erreur",missingParameters:"Il manque des paramètres requis dans le callback OIDC",invalidState:"L'état OIDC est invalide ou a déjà été utilisé",stateExpired:"La session OIDC a expiré — veuillez réessayer",providerNotFound:"Fournisseur OIDC introuvable",discoveryFailed:"Impossible de récupérer le document de découverte OIDC",invalidDiscovery:"Le document de découverte OIDC est invalide",networkError:"Erreur réseau lors de l'échange de jeton OIDC",badResponse:"Réponse inattendue lors de l'échange de jeton OIDC",noIdToken:"Le fournisseur OIDC n'a pas renvoyé de jeton d'identité",validationFailed:"La validation du jeton OIDC a échoué",nonceMismatch:"Le nonce OIDC ne correspond pas — possible attaque par rejeu",missingSubClaim:"Le jeton OIDC est dépourvu de la revendication sub",noLinkedAccount:"Aucun compte local est lié à cette identité OIDC",accountInactive:"Votre compte est inactif",userResolutionFailed:"Impossible de résoudre votre compte",internalError:"Une erreur interne est survenue lors de la connexion OIDC",tokenExchangeFailed:"L'échange de jeton OIDC a échoué"},forgotPasswordTitle:"Mot de passe oublié",forgotPasswordMessage:"Contactez votre administrateur pour réinitialiser votre accès.",forgotPasswordEmailMessage:"Entrez votre email pour recevoir un nouveau mot de passe.",emailAddress:"Adresse Email",emailPlaceholder:"votre.email@exemple.com",cancel:"Annuler",sending:"Envoi...",sendResetEmail:"Envoyer l'email",howToReset:"Comment réinitialiser :",resetStep1:"Contactez votre admin Bambuddy",resetStep2:"Demandez une réinitialisation dans la Gestion Utilisateurs",resetStep3:"Il vous donnera un mot de passe temporaire",resetStep4:"Connectez-vous et changez-le dans les Paramètres",gotIt:"Compris",twoFA:{title:"Authentification à deux facteurs",subtitle:"Votre compte est protégé par la 2FA. Saisissez le code de vérification ci-dessous.",methodAuthenticator:"Application d'authentification",methodEmail:"Code par e-mail",methodBackup:"Code de récupération",instructionsTotp:"Ouvrez votre application d'authentification et saisissez le code à 6 chiffres pour Bambuddy.",instructionsEmail:"Un code à 6 chiffres a été envoyé à votre adresse e-mail. Il est valable 10 minutes.",instructionsEmailNotSent:"Cliquez ci-dessous pour recevoir un code de vérification par e-mail.",instructionsBackup:"Saisissez l'un de vos codes de récupération à 8 caractères. Chaque code ne peut être utilisé qu'une seule fois.",sendCodeButton:"Envoyer le code par e-mail",sendingCode:"Envoi en cours...",resendCode:"Renvoyer le code",codeLabel:"Code de vérification",backupCodeLabel:"Code de récupération",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Vérifier",verifyingButton:"Vérification en cours...",backToLogin:"← Retour à la connexion",orContinueWith:"ou continuer avec",signInWith:"Se connecter avec {{provider}}",enterCode:"Veuillez entrer le code de vérification",sendCodeFailed:"Échec de l'envoi du code de vérification",invalidCode:"Code invalide. Veuillez réessayer."},resetPassword:{title:"Définir un nouveau mot de passe",subtitle:"Saisissez et confirmez votre nouveau mot de passe ci-dessous.",newPassword:"Nouveau mot de passe",newPasswordPlaceholder:"Au moins 8 caractères",confirmPassword:"Confirmer le mot de passe",confirmPasswordPlaceholder:"Répéter le nouveau mot de passe",saving:"Enregistrement…",submit:"Définir le mot de passe",backToLogin:"Retour à la connexion",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Le mot de passe doit contenir au moins 8 caractères",resetFailed:"Échec de la réinitialisation. Le lien a peut-être expiré."}},setup:{title:"Configuration Bambuddy",subtitle:"Configurez l'authentification",enableAuth:"Activer l'authentification",adminAccount:"Compte Admin",adminAccountDesc:"Si des admins existent, ils seront utilisés. Sinon, créez-en un ci-dessous.",adminUsername:"Utilisateur Admin",adminPassword:"Mot de passe Admin",optionalIfAdminExists:"(optionnel si admin existe)",adminUsernamePlaceholder:"Nom admin (optionnel)",adminPasswordPlaceholder:"Mdp admin (optionnel)",confirmPassword:"Confirmer mdp",confirmPasswordPlaceholder:"Confirmez mdp admin",settingUp:"Configuration...",completeSetup:"Terminer la configuration",toast:{authEnabledAdminCreated:"Authentification activée et admin créé",authEnabledExistingAdmins:"Authentification activée avec admins existants",setupCompleted:"Configuration terminée",enterBothCredentials:"Entrez les deux ou laissez vide pour utiliser les admins existants",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères"}},changePassword:{title:"Changer le mot de passe",currentPassword:"Mot de passe actuel",currentPasswordPlaceholder:"Entrez mdp actuel",newPassword:"Nouveau mot de passe",newPasswordPlaceholder:"Nouveau mdp (min 6 char)",confirmPassword:"Confirmer nouveau mdp",confirmPasswordPlaceholder:"Confirmez nouveau mdp",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères",changing:"Changement...",success:"Mot de passe modifié",failed:"Échec modification"},plateAlert:{title:"Impression en Pause !",message:"Objets détectés sur le plateau. L'impression a été suspendue automatiquement. Videz le plateau avant de reprendre.",understand:"J'ai compris"},camera:{title:"Vue Caméra",invalidPrinterId:"ID imprimante invalide",live:"Direct",snapshot:"Instantané",restartStream:"Redémarrer le flux",refreshSnapshot:"Rafraîchir l'image",fullscreen:"Plein écran",exitFullscreen:"Quitter plein écran",connectingToCamera:"Connexion caméra...",capturingSnapshot:"Capture...",connectionLost:"Connexion perdue",connectionFailed:"Échec connexion caméra",reconnecting:"Reconnexion dans {{countdown}}s... (essai {{attempt}}/{{max}})",reconnectNow:"Reconnexion immédiate",cameraUnavailable:"Caméra indisponible",cameraUnavailableDesc:"Vérifiez que l'imprimante est allumée.",noCamera:"Aucune caméra disponible",retry:"Réessayer",cameraStream:"Flux caméra",zoomOut:"Zoom arrière",zoomIn:"Zoom avant",resetZoom:"Réinitialiser zoom",recording:"Enregistrement",startRecording:"Démarrer l'enregistrement",stopRecording:"Arrêter l'enregistrement",chamberLight:"Basculer lumière chambre"},groups:{title:"Gestion des Groupes",subtitle:"Gérez les permissions pour le contrôle d'accès",backToSettings:"Retour aux paramètres",createGroup:"Créer un groupe",noPermission:"Accès refusé.",system:"Système",noDescription:"Pas de description",usersCount:"{{count}} utilisateurs",permissionsCount:"{{count}} permissions",edit:"Modifier",delete:"Supprimer",toast:{created:"Groupe créé",updated:"Groupe mis à jour",deleted:"Groupe supprimé",enterGroupName:"Entrez un nom de groupe"},modal:{editGroup:"Modifier le groupe",createGroup:"Créer un groupe",cancel:"Annuler",saving:"Enregistrement...",creating:"Création...",saveChanges:"Enregistrer"},form:{groupName:"Nom du groupe",groupNamePlaceholder:"Nom du groupe",systemGroupWarning:"Les groupes système sont fixes",description:"Description",descriptionPlaceholder:"Description (optionnel)",permissions:"Permissions ({{count}} sélectionnées)"},deleteModal:{title:"Supprimer le groupe",message:"Les utilisateurs de ce groupe perdront ces permissions.",confirm:"Supprimer"},editor:{title:"Modifier le groupe",createTitle:"Créer un groupe",search:"Rechercher des permissions...",selectAll:"Tout sélectionner",clearAll:"Tout désélectionner",permissionsSelected:"{{count}} sélectionnée(s)",noResults:"Aucune permission ne correspond à votre recherche"}},users:{title:"Gestion des Utilisateurs",subtitle:"Gérez les accès à Bambuddy",backToSettings:"Retour aux paramètres",createUser:"Créer un utilisateur",noPermission:"Accès refusé.",admin:"Admin",noGroups:"Aucun groupe",active:"Actif",inactive:"Inactif",edit:"Modifier",delete:"Supprimer",system:"Système",noGroupsAvailable:"Aucun groupe disponible",table:{username:"Utilisateur",groups:"Groupes",status:"Statut",actions:"Actions"},toast:{created:"Utilisateur créé",updated:"Utilisateur mis à jour",deleted:"Utilisateur supprimé",fillRequired:"Remplissez les champs requis",passwordsDoNotMatch:"Les mots de passe ne correspondent pas",passwordTooShort:"Minimum 6 caractères"},modal:{createUser:"Créer utilisateur",editUser:"Modifier utilisateur",cancel:"Annuler",creating:"Création...",saving:"Enregistrement...",saveChanges:"Enregistrer",advancedAuthSubtitle:"avec Authentification Avancée"},form:{username:"Utilisateur",usernamePlaceholder:"Nom utilisateur",email:"Email",emailPlaceholder:"utilisateur@exemple.com",password:"Mot de passe",passwordPlaceholder:"Mot de passe",confirmPassword:"Confirmer mdp",confirmPasswordPlaceholder:"Confirmez mdp",newPasswordPlaceholder:"Nouveau mdp",confirmNewPasswordPlaceholder:"Confirmez nouveau mdp",leaveBlankToKeep:"Laissez vide pour conserver l'actuel",groups:"Groupes",optional:"optionnel",autoGeneratedPassword:"Un mot de passe sera généré et envoyé par email.",passwordManagedByAdvancedAuth:'Géré par Auth Avancée. Utilisez "Réinitialiser" pour envoyer un nouveau mdp par email.',resetPassword:"Réinitialiser le mot de passe",resettingPassword:"Réinitialisation..."},deleteModal:{title:"Supprimer utilisateur",message:"Cette action est irréversible.",confirm:"Supprimer"}},streamOverlay:{title:"Superposition Flux",invalidPrinterId:"ID invalide",cameraStream:"Flux caméra",progress:"Progression",eta:"Fin estimée",printerIdle:"Imprimante inactive",printerOffline:"Imprimante hors ligne",status:{printing:"Impression",paused:"En pause",finished:"Terminée",failed:"Échouée",idle:"Inactive",unknown:"Inconnue"}},profiles:{title:"Profils",subtitle:"Gérez vos presets slicer et calibrations Pressure Advance",tabs:{cloud:"Profils Cloud",local:"Profils Locaux",kprofiles:"K-Profiles"},localProfiles:{title:"Profils Locaux",subtitle:"Gérez vos presets OrcaSlicer",import:"Importer Profils",importDesc:"Déposez les fichiers .bbscfg, .bbsflmt, .orca_filament, .zip ou .json",importing:"Importation...",search:"Chercher un preset...",noPresets:"Aucun preset local",badge:"Local",edit:"Modifier",delete:"Supprimer",cancel:"Annuler",deleteConfirmTitle:"Supprimer Preset",deleteConfirm:"Supprimer définitivement ce preset ?",source:"Source",inheritsFrom:"Hérite de",filamentType:"Type",vendor:"Vendeur",compatiblePrinters:"Imprimantes",nozzleTemp:"Temp Buse",cost:"Coût",density:"Densité",pressureAdvance:"Pressure Advance",filament:"Filament",process:"Processus",printer:"Imprimante",toast:{importSuccess:"{{count}} profil(s) importé(s)",importSkipped:"{{count}} profil(s) ignoré(s) (doublons)",importError:"{{count}} erreur(s) d'import",deleted:"Preset supprimé",updated:"Preset mis à jour"}},connectedAs:"Connecté en tant que",logout:"Déconnexion",noLogoutPermission:"Pas d'autorisation de déconnexion",failedToLoad:"Échec chargement profils",retry:"Réessayer",time:{justNow:"À l'instant",minsAgo:"Il y a {{count}}m",hoursAgo:"Il y a {{count}}h",daysAgo:"Il y a {{count}}j"},toast:{loggedOut:"Déconnecté"},login:{title:"Connexion Bambu Cloud",subtitle:"Synchronisez vos presets slicer",email:"Email",password:"Mot de passe",region:"Région",regionGlobal:"Global",regionChina:"Chine",verificationCode:"Code de vérification",totpCode:"Code Authenticator",checkEmail:"Code envoyé à {{email}}",enterTotpHint:"Entrez le code 2FA",accessToken:"Jeton d'accès (Access Token)",accessTokenHint:"Collez le jeton (depuis Bambu Studio)",back:"Retour",loginButton:"Connexion",verifyButton:"Vérifier",setTokenButton:"Définir Jeton",useToken:"Utiliser jeton d'accès",useEmail:"Connexion par email",toast:{loggedIn:"Connecté avec succès",codeSent:"Code envoyé par email",enterTotp:"Entrez le code Authenticator",tokenSet:"Jeton défini"}},presets:{myPreset:"Mon preset (modifiable)",duplicate:"Dupliquer",editable:"Modifiable",failedToLoadDetails:"Échec détails preset",deleteConfirm:"Supprimer ce preset ?",deleteWarning:'Ceci supprimera "{{name}}" de Bambu Cloud définitivement.',noDuplicatePermission:"Pas d'autorisation duplication",noEditPermission:"Pas d'autorisation modification",noDeletePermission:"Pas d'autorisation suppression",types:{filament:"Preset filament",printer:"Preset imprimante",process:"Preset processus"},toast:{deleted:"Preset supprimé",created:"Preset créé",updated:"Preset mis à jour",duplicated:"Preset dupliqué",fieldAdded:'Champ "{{key}}" ajouté',exported:"Preset exporté"},baseLabel:"Base : {{name}}",currentLabel:"Actuel : {{name}}",newPreset:"Nouveau Preset",editPreset:"Modifier Preset",duplicatePreset:"Dupliquer Preset",createNewPreset:"Créer un nouveau Preset",customizeSettings:"Personnalisez vos réglages",compareWithBase:"Comparer avec la base",compare:"Comparer",basePreset:"Preset de base",selectBasePreset:"Choisir preset de base...",presetName:"Nom du preset",myCustomPreset:"Mon preset personnalisé",inheritsFrom:"Hérite de",dropJsonToImport:"Glissez JSON pour importer",tabs:{common:"Commun",allFields:"Tous les champs"},availableFields:"Champs disponibles",searchFieldsPlaceholder:"Chercher un champ...",noMatchingFields:"Aucun champ trouvé",allFieldsAdded:"Tous les champs sont ajoutés",addCustomField:"Ajouter un champ personnalisé",yourOverrides:"Vos modifications",noOverridesYet:"Aucune modification",clickFieldsToAdd:"Cliquez à gauche pour ajouter",saveAsTemplate:"Enregistrer comme modèle",jsonTip:"Conseil : Glissez un .json pour importer les réglages"},cloudView:{searchPlaceholder:"Chercher presets...",templates:"Modèles",refresh:"Rafraîchir",newPreset:"Nouveau Preset",clearFilters:"Effacer filtres",compareMode:"Mode Comparaison",selectAnotherPreset:"Choisir un autre preset {{type}}",clickTwoPresets:"Choisissez deux presets de même type",selectFirst:"1. Sélectionner premier",selectSecond:"2. Sélectionner second",compareNow:"Comparer maintenant",lastSynced:"Synchronisé :",showingCount:"{{showing}} sur {{total}} presets",noPresetsFound:"Aucun preset trouvé",columns:{filament:"Filament",process:"Processus",printer:"Imprimante"},noFilamentPresets:"Pas de preset filament",noProcessPresets:"Pas de preset processus",noPrinterPresets:"Pas de preset imprimante",filters:{type:"Type",owner:"Propriétaire",printer:"Imprimante",nozzle:"Buse",filament:"Filament",layer:"Couche",all:"Tous",myPresets:"Mes Presets",builtIn:"Inclus",process:"Processus"},noTemplatesPermission:"Pas d'autorisation modèles",noRefreshPermission:"Pas d'autorisation rafraîchissement",noCreatePermission:"Pas d'autorisation création"},templates:{title:"Modèles rapides",noTemplates:"Aucun modèle",createFirst:"Créez-en depuis l'éditeur de preset",typeFilter:"Type :",deleteTitle:"Supprimer modèle",deleteWarning:"Action irréversible",deleteConfirm:'Supprimer "{{name}}" ?',namePlaceholder:"Nom du modèle",descriptionPlaceholder:"Description",settingsJson:"Paramètres (JSON)",fieldsCount:"{{count}} champs",shownInModals:"Visible dans fenêtres",hiddenInModals:"Masqué dans fenêtres",apply:"Appliquer",toast:{deleted:"Modèle supprimé",updated:"Modèle mis à jour",created:"Modèle créé",applied:"Modèle appliqué"}}},support:{debugLoggingActive:"Débogage actif",manageLogs:"Gérer",collectItem7:"Connectivité et versions firmware",collectItem8:"Statut intégrations (Spoolman, MQTT, HA)",collectItem9:"Interfaces réseau (sous-réseaux)",collectItem10:"Versions packages Python",collectItem11:"Santé base de données",collectItem12:"Détails environnement Docker"},fileManager:{title:"Gestionnaire de fichiers",subtitle:"Organisez vos fichiers d'impression",uploadFiles:"Téléverser fichiers",newFolder:"Nouveau dossier",folderName:"Nom du dossier",folderNamePlaceholder:"ex: Pièces Utiles",renameFile:"Renommer fichier",renameFolder:"Renommer dossier",moveFiles:"Déplacer {{count}} fichier(s)",rootNoFolder:"Racine (aucun dossier)",current:"actuel",linkFolder:"Lier le dossier",linkFolderDescription:'Lier "{{name}}" à un projet ou archive.',project:"Projet",archive:"Archive",noProjectsFound:"Aucun projet trouvé",noArchivesFound:"Aucune archive trouvée",unlink:"Délier",link:"Lier",dragDropFiles:"Glissez les fichiers ici",dropFilesHere:"Déposez ici",orClickToBrowse:"ou cliquez pour parcourir",allFileTypesSupported:"Tous types supportés. ZIP extraits.",zipFilesDetected:"ZIP détectés",zipExtractOptions:"Choix de structure pour ZIP :",preserveZipStructure:"Garder structure ZIP",createFolderFromZip:"Dossier par nom du ZIP",stlThumbnailGeneration:"Vignettes STL",zipMayContainStl:"Extraction vignettes possible pour STL.",thumbnailsCanBeGenerated:"Génération vignettes (peut être long).",generateThumbnailsForStl:"Générer vignettes STL",threemfDetected:"Fichiers 3MF détectés",threemfExtractionInfo:"Réglages extraits auto du 3MF.",willBeExtracted:"Sera extrait",filesExtracted:"{{count}} fichiers extraits",uploadComplete:"Terminé : {{succeeded}} succès",uploadFailed:"Échec du téléversement",zipFilesFailed:"{{count}} fichiers échoués",uploading:"Téléversement...",changeLink:"Modifier lien...",linkTo:"Lier à...",linkToProjectOrArchive:"Lier à projet ou archive",addToQueue:"Ajouter à la file",schedulePrint:"Planifier",generateThumbnail:"Générer vignette",generateThumbnails:"Générer vignettes",generateThumbnailsForMissing:"Vignettes STL manquantes",gridView:"Grille",listView:"Liste",lowDiskSpaceWarning:"Espace disque faible",lowDiskSpaceDetails:"{{free}} libre sur {{total}}. Seuil : {{threshold}} Go.",files:"Fichiers",folders:"Dossiers",size:"Taille",free:"Libre",allFiles:"Tous les fichiers",wrap:"Retour ligne",enableTextWrapping:"Activer retour ligne",disableTextWrapping:"Désactiver retour ligne",collapse:"Réduire",collapseFoldersByDefault:"Réduire les dossiers par défaut",expandFoldersByDefault:"Développer les dossiers par défaut",dragToResizeTooltip:"Glisser pour redimensionner, double-clic reset",searchFiles:"Chercher fichiers...",allTypes:"Tous types",prints:"Impressions",ascending:"Croissant",descending:"Décroissant",resultsCount:"{{showing}} sur {{total}} fichiers",selectAll:"Tout sélectionner",deselectAll:"Tout désélectionner",selected:"{{count}} sélectionnés",adding:"Ajout...",loadingFiles:"Chargement...",folderIsEmpty:"Dossier vide",noFilesYet:"Aucun fichier",folderEmptyDescription:"Téléversez ou déplacez des fichiers ici.",noFilesDescription:"Téléversez des fichiers pour organiser.",noMatchingFiles:"Aucun fichier correspondant",noMatchingFilesDescription:"Ajustez votre recherche.",clearFilters:"Effacer filtres",printedCount:"Imprimé {{count}}x",uploadedBy:"Téléversé par",deleteFolder:"Supprimer dossier",deleteFile:"Supprimer fichier",deleteFilesCount:"Supprimer {{count}} fichiers",deleteFolderConfirm:"Supprimer le dossier et son contenu ?",deleteFileConfirm:"Supprimer ce fichier ?",deleteFilesConfirm:"Supprimer {{count}} fichiers définitivement ?",deleting:"Suppression...",noPermissionRenameFolder:"Pas d'autorisation renommage",noPermissionLinkFolder:"Pas d'autorisation lien",noPermissionDeleteFolder:"Pas d'autorisation suppression dossier",noPermissionPrint:"Pas d'autorisation impression",noPermissionSlice:"You do not have permission to slice files",noPermissionAddToQueue:"Pas d'autorisation file",noPermissionDownload:"Pas d'autorisation téléchargement",noPermissionRenameFile:"Pas d'autorisation renommage fichier",noPermissionGenerateThumbnail:"Pas d'autorisation vignettes",noPermissionDeleteFile:"Pas d'autorisation suppression fichier",noPermissionCreateFolder:"Pas d'autorisation nouveau dossier",noPermissionUpload:"Pas d'autorisation téléversement",noPermissionMoveFiles:"Pas d'autorisation déplacement",noPermissionDeleteFiles:"Pas d'autorisation suppression groupée",linkExternal:"Lier externe",linkExternalFolder:"Lier un dossier externe",linkExternalFolderDescription:"Monter un répertoire hôte (NAS, USB, partage réseau) dans le gestionnaire de fichiers. Les fichiers ne sont pas copiés — ils sont lus directement depuis le chemin d'origine.",externalFolderNamePlaceholder:"ex. Impressions NAS",externalPath:"Chemin hôte",externalPathHelp:"Chemin absolu du répertoire sur l'hôte Docker. Doit être monté en bind dans le conteneur.",readOnly:"Lecture seule",readOnlyHelp:"empêche les téléversements et suppressions",showHiddenFiles:"Afficher les fichiers cachés (fichiers point)",externalFolder:"Dossier externe",scanFolder:"Scanner",toast:{folderCreated:"Dossier créé",folderDeleted:"Dossier supprimé",fileDeleted:"Fichier supprimé",filesDeleted:"{{count}} fichiers supprimés",filesMoved:"Fichiers déplacés",folderLinked:"Dossier lié",folderUnlinked:"Dossier délié",externalFolderLinked:"Dossier externe lié et scanné",folderScanned:"Scan terminé : {{added}} ajoutés, {{removed}} supprimés",addedToQueue:"{{count}} fichier(s) ajouté(s)",addedToQueuePartial:"{{added}} ajoutés, {{failed}} échecs",failedToAddToQueue:"Échec ajout file : {{error}}",fileRenamed:"Fichier renommé",folderRenamed:"Dossier renommé",thumbnailsGenerated:"{{count}} vignette(s) générée(s)",thumbnailsGeneratedPartial:"{{succeeded}} succès, {{failed}} échecs",noStlMissingThumbnails:"Aucun STL sans vignette",failedToGenerateThumbnails:"Échec vignettes : {{error}}",thumbnailGenerated:"Vignette générée",failedToGenerateThumbnail:"Échec vignette : {{error}}"}},projects:{title:"Projets",subtitle:"Suivez vos projets d'impression 3D",newProject:"Nouveau Projet",editProject:"Modifier Projet",deleteProject:"Supprimer Projet",projectName:"Nom du Projet",description:"Description",noProjects:"Aucun projet",noProjectsFiltered:"Aucun projet {{status}}",noProjectsFilteredHelp:`Vous n'avez aucun projet "{{status}}". Les projets apparaîtront ici lorsque leur statut changera.`,createFirst:"Créez votre premier projet pour organiser vos builds.",createFirstButton:"Créer votre premier projet",create:"Créer",files:"Fichiers",prints:"Impressions",plates:"plateaux",parts:"pièces",lastModified:"Modifié le",deleteConfirm:"Supprimer ce projet ? Les archives seront déliées mais conservées.",addFiles:"Ajouter fichiers",removeFile:"Retirer fichier",viewDetails:"Détails",namePlaceholder:"ex: Build Voron 2.4",descriptionPlaceholder:"Description optionnelle...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"L'URL doit commencer par http:// ou https://",openExternalUrl:"Ouvrir l’URL du projet",coverImageLabel:"Photo de couverture",coverImageAlt:"Photo de couverture du projet",coverImageUpload:"Téléverser",coverImageReplace:"Remplacer",coverImageRemove:"Supprimer",color:"Couleur",targetPlates:"Plateaux cibles",targetPlatesPlaceholder:"ex: 25",targetPlatesHelp:"Nombre total de jobs",targetParts:"Pièces cibles",targetPartsPlaceholder:"ex: 150",targetPartsHelp:"Nombre total d'objets",tagsLabel:"Tags (séparés par virgules)",tagsPlaceholder:"ex: voron, cadeau",dueDate:"Échéance",priority:"Priorité",priorityLow:"Basse",priorityNormal:"Normale",priorityHigh:"Haute",priorityUrgent:"Urgente",statusActive:"Actif",statusCompleted:"Terminé",statusArchived:"Archivé",done:"Fait",completed:"terminé",failed:"échoué",inQueue:"en file",noPrintsYet:"Aucune impression",printJobs:"Jobs (plateaux)",partsPrinted:"Pièces imprimées",failedParts:"Pièces échouées",import:"Importer",export:"Exporter",importProject:"Importer projet",exportAll:"Exporter tous les projets",loading:"Chargement des projets...",noEditPermission:"Pas d'autorisation de modification",noDeletePermission:"Pas d'autorisation de suppression",noCreatePermission:"Pas d'autorisation de création",noImportPermission:"Pas d'autorisation d'import",noExportPermission:"Pas d'autorisation d'export",toast:{created:"Projet créé",updated:"Projet mis à jour",deleted:"Projet supprimé",imported:"Projet importé",multipleImported:"{{count}} projets importés",importFailed:"Échec d'import",exported:"Projets exportés (métadonnées)"}},projectDetail:{notFound:"Projet non trouvé",backToProjects:"Retour aux Projets",export:"Exporter",exportProject:"Exporter projet",noExportPermission:"Pas d'autorisation export",noEditPermission:"Pas d'autorisation modification",partOf:"Fait partie de :",priorityLabel:"Priorité :",noPrints:"Aucune impression dans ce projet",status:{active:"Actif",completed:"Terminé",archived:"Archivé"},priority:{low:"Basse",normal:"Normale",high:"Haute",urgent:"Urgente"},dueDate:{overdue:"En retard",today:"Aujourd'hui",daysLeft:"{{count}} jours restants"},progress:{platesProgress:"Progression Plateaux",partsProgress:"Progression Pièces",printJobs:"jobs d'impression",parts:"pièces",percentComplete:"{{percent}}% terminé",remaining:"{{count}} restant(s)"},stats:{printJobs:"Jobs d'Impression",total:"total",failed:"{{count}} échecs",partsPrinted:"{{count}} pièces imprimées",printTime:"Temps d'Impression",filamentUsed:"Filament utilisé"},cost:{title:"Suivi des coûts",filamentCost:"Coût Filament",energy:"Énergie",totalCost:"Coût Total",total:"Total",includesBom:"BOM incluse",budget:"Budget",remaining:"Restant"},subProjects:{title:"Sous-projets ({{count}})"},notes:{title:"Notes",noEditPermission:"Pas d'autorisation modification",placeholder:"Ajouter des notes...",empty:"Aucune note. Cliquez sur modifier."},files:{title:"Fichiers",linkFolders:"Liez des dossiers depuis le gestionnaire",forQuickAccess:"pour un accès rapide.",fileCount:"{{count}} fichier(s)",empty:"Aucun dossier lié.",noFiles:"Aucun fichier dans ce dossier.",print:"Imprimer maintenant",addToQueue:"Ajouter à la file"},bom:{title:"BOM (Liste matériel)",acquired:"{{completed}}/{{total}} acquis",showAll:"Tout afficher",hideDone:"Masquer acquis",addPart:"Ajouter matériel",noAddPermission:"Pas d'autorisation ajout",partNamePlaceholder:"Nom (ex: Vis M3x8)",partName:"Nom de pièce",qty:"Qté",price:"Prix ({{currency}})",sourcingUrlPlaceholder:"Lien d'achat (optionnel)",remarksPlaceholder:"Remarques (optionnel)",deletePart:"Supprimer pièce",deleteConfirm:'Supprimer "{{name}}" ?',noUpdatePermission:"Pas d'autorisation mise à jour",noEditPermission:"Pas d'autorisation modification",noDeletePermission:"Pas d'autorisation suppression",totalCost:"Coût total :",empty:"BOM vide. Ajoutez du matériel ou de l'électronique."},timeline:{title:"Historique d'activité",empty:"Aucune activité."},template:{saveAsTemplate:"Enregistrer comme modèle",noCreatePermission:"Pas d'autorisation modèle"},queue:{title:"File d'attente",viewAll:"Tout voir",printing:"{{count}} en cours",queued:"{{count}} en file"},prints:{title:"Impressions ({{count}})"},toast:{projectUpdated:"Projet mis à jour",partAdded:"Pièce ajoutée",partRemoved:"Pièce retirée",exportFailed:"Échec export",projectExported:"Projet exporté",templateCreated:"Modèle créé"}},system:{title:"Informations Système",version:"Version",uptime:"Temps de fonctionnement",cpuUsage:"Utilisation CPU",memoryUsage:"Utilisation RAM",diskUsage:"Utilisation Disque",networkInfo:"Infos Réseau",logs:"Journaux",debugMode:"Mode Débogage",enableDebug:"Activer débogage",disableDebug:"Désactiver débogage",downloadLogs:"Télécharger logs",clearLogs:"Effacer logs",dockerInfo:"Infos Docker",containerName:"Nom conteneur",imageName:"Nom image",platform:"Plateforme",architecture:"Architecture"},library:{title:"Bibliothèque Filament",addFilament:"Ajouter Filament",editFilament:"Modifier Filament",deleteFilament:"Supprimer Filament",vendor:"Vendeur",material:"Matériau",color:"Couleur",kFactor:"Facteur K",temperature:"Température",noFilaments:"Bibliothèque vide",deleteConfirm:"Supprimer ce filament ?",importFromPrinter:"Importer de l'imprimante",exportToFile:"Exporter vers fichier"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Intégration Spoolman",enabled:"Spoolman Activé",url:"URL Spoolman",connected:"Connecté",disconnected:"Non Connecté",testConnection:"Tester connexion",sync:"Synchroniser",syncing:"Sync...",lastSync:"Dernière Sync",linkToSpoolman:"Lier à Spoolman",openInSpoolman:"Ouvrir Spoolman",unlinkSpool:"Délier bobine",unlinkConfirmTitle:"Dissocier la bobine?",unlinkConfirmMessage:"Cette opération déconnectera la bobine de Spoolman. Les données de la bobine dans Spoolman resteront inchangées.",selectSpool:"Choisir bobine",noUnlinkedSpools:"Pas de bobine libre",linkSuccess:"Lien réussi",linkFailed:"Échec lien",unlinkSuccess:"Bobine dissociée avec succès",unlinkFailed:"Échec de la dissociation de la bobine",spoolId:"ID Bobine",fillSourceLabel:"(Spoolman)",weight:"Poids",remaining:"Restant",disableWeightSync:"Désactiver Sync poids estimé AMS",disableWeightSyncDesc:"Ne pas utiliser les estimations AMS. Utile si vous préférez le suivi Spoolman.",reportPartialUsage:"Rapporter consommation partielle pour échecs",reportPartialUsageDesc:"Si l'impression échoue, rapporte le filament consommé selon les couches."},inventory:{title:"Inventaire de Bobines",spoolmanMixedContentTitle:"Spoolman ne peut pas se charger en HTTPS — contenu mixte bloqué par votre navigateur",spoolmanMixedContentBody:"Bambuddy est servi en HTTPS (via votre reverse proxy), mais votre URL Spoolman est encore en HTTP. Les navigateurs bloquent le contenu mixte pour des raisons de sécurité, donc l'interface Spoolman intégrée ne peut pas s'afficher. Spoolman doit être accessible en HTTPS.",spoolmanMixedContentFixReverseProxy:"Placez Spoolman derrière le même reverse proxy que Bambuddy (Traefik / Nginx / Caddy) en HTTPS, puis mettez à jour l'URL Spoolman dans les Paramètres avec la nouvelle adresse HTTPS.",spoolmanMixedContentFixOpenNewTab:"Alternative : ouvrez Spoolman dans un nouvel onglet en HTTP — les règles de contenu mixte ne s'appliquent qu'aux cadres intégrés, un onglet autonome fonctionne.",spoolmanOpenInNewTab:"Ouvrir Spoolman dans un nouvel onglet",addSpool:"Ajouter Bobine",editSpool:"Modifier Bobine",material:"Matériau",selectMaterial:"Choisir matériau...",subtype:"Sous-type",brand:"Marque",searchBrand:"Chercher marque...",useCustomBrand:'Utiliser "{{brand}}"',useCustomMaterial:"Utiliser un matériau personnalisé : {{material}}",colorName:"Nom de couleur",colorNamePlaceholder:"Jade White, Fire Red...",color:"Couleur",hexColor:"Code Hex",pickColor:"Choisir couleur perso",labelWeight:"Poids net",coreWeight:"Poids bobine vide",searchSpoolWeight:"Chercher poids bobine...",weightUsed:"Consommé",currentWeight:"Poids restant",measuredWeight:"Poids mesuré",spoolName:"Bobine",costPerKg:"Coût par kg",measuredWeightError:"Le poids mesuré doit être entre {{min}}g et {{max}}g.",slicerFilament:"Filament Slicer",slicerFilamentName:"Nom du Preset Slicer",slicerPreset:"Preset Slicer",searchPresets:"Chercher presets...",selectedPreset:"Sélectionné",noPresetsFound:"Aucun preset trouvé",tempOverrides:"Exceptions Température",note:"Note",notePlaceholder:"Notes additionnelles sur cette bobine...",category:"Catégorie",categoryPlaceholder:"ex. Production, Prototype, Client A",categoryNone:"Sans catégorie",lowStockThresholdOverride:"Seuil bas (cette bobine)",lowStockThresholdOverrideHelp:"Laisser vide pour utiliser le seuil global ({{global}} %).",clearRfid:"Effacer le tag RFID",rfidCleared:"Tag RFID effacé",archive:"Archiver",restore:"Restaurer",noSpools:"Aucune bobine. Ajoutez votre première bobine pour commencer.",noAvailableSpools:"Aucune bobine disponible. Ajoutez une bobine à votre inventaire ou désaffectez-en une d'un autre emplacement.",kProfiles:"K-Profiles",addKProfile:"Ajouter K-Profile",assignSpool:"Assigner Bobine",unassignSpool:"Désassigner",assignSuccess:"Bobine assignée et slot AMS configuré",assignFailed:"Échec assignation",selectSpool:"Choisir une bobine pour ce slot",assigned:"Assigné",assigning:"Assignation...",searchSpools:"Chercher bobines...",showAllSpools:"Afficher toutes les bobines",allMaterials:"Tous Matériaux",filterByBrand:"Filtrer par marque...",showArchived:"Afficher archivées",quickAdd:"Ajout rapide (Stock)",quantity:"Quantité",stock:"Stock",configured:"Configuré",spoolsCreated:"{{count}} bobines créées",spoolCreated:"Bobine créée",spoolUpdated:"Bobine mise à jour",spoolDeleted:"Bobine supprimée",spoolArchived:"Bobine archivée",spoolRestored:"Bobine restaurée",deleteConfirm:"Supprimer définitivement cette bobine ?",archiveConfirm:"Voulez-vous vraiment archiver cette bobine ?",advancedSettings:"Paramètres Avancés",filamentInfoTab:"Infos Filament",paProfileTab:"Profil PA",filamentInfo:"Filament",additional:"Additionnel",loadingPresets:"Chargement des presets cloud...",cloudConnected:"Cloud connecté",cloudNotConnected:"Cloud déconnecté (valeurs par défaut)",recentColors:"Récentes",searchColors:"Chercher couleurs...",searchResults:"Résultats",allColors:"Toutes",commonColors:"Communes",showLess:"Moins",showAll:"Toutes",noColorsFound:"Aucune couleur correspondante",noResults:"Aucun résultat",extraColorsLabel:"Extra colours",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.",extraColorsInvalid:"Ignored invalid hex: {{tokens}}",colorEffectLabel:"Effect",colorEffect:{none:"None",sparkle:"Sparkle",wood:"Wood",marble:"Marble",glow:"Glow",matte:"Matte",silk:"Silk",galaxy:"Galaxy",rainbow:"Rainbow",metal:"Metal",translucent:"Translucent",gradient:"Gradient",dualColor:"Dual Color",triColor:"Tri Color",multicolor:"Multicolor"},selectMaterialFirst:"Veuillez choisir un matériau dans l'onglet Infos Filament.",noPrintersConfigured:"Ajoutez une imprimante pour utiliser les profils PA.",matchingFilter:"Correspondant",anyBrand:"Toute marque",anyVariant:"Toute variante",autoSelect:"Auto-sélection",matches:"correspondances",match:"correspondance",noMatches:"Aucune correspondance",connected:"Connecté",offline:"Hors ligne",printerOffline:"Imprimante hors ligne. Connectez-vous pour voir les profils.",noKProfilesMatch:"Aucun profil K ne correspond au filament.",leftNozzle:"Buse Gauche",rightNozzle:"Buse Droite",profilesSelected:"profil(s) de calibration sélectionné(s)",totalInventory:"Total Inventaire",totalConsumed:"Total Consommé",byMaterial:"Par Matériau",inPrinter:"Dans Imprimante",lowStock:"Stock Bas",sinceTracking:"Depuis le début du suivi",loadedInAms:"Chargé dans AMS/Ext",remaining:"Restant",weightCheck:"Vérification poids",lastWeighed:"Dernière pesée",neverWeighed:"Jamais pesé",search:"Chercher bobines...",showing:"Affichage",to:"à",of:"sur",show:"Voir",spools:"bobines",spool:"bobine",page:"Page",noSpoolsMatch:"Aucun résultat trouvé",noSpoolsMatchDesc:"Ajustez votre recherche ou vos filtres.",active:"Actif",archived:"Archivé",all:"Tous",used:"Occasion",new:"Neuf",clearFilters:"Effacer filtres",table:"Tableau",cards:"Cartes",net:"Net",groupSimilar:"Grouper",groupedSpools:"{{count}} bobines identiques",groupedRows:"lignes",columns:"Colonnes",configureColumns:"Configurer Colonnes",configureColumnsDesc:"Glissez pour ordonner ou utilisez les flèches. Cliquez sur l'œil pour masquer.",visible:"visible",reset:"Reset",cancel:"Annuler",applyChanges:"Appliquer",moveUp:"Monter",moveDown:"Descendre",hideColumn:"Masquer",showColumn:"Afficher",linkToSpool:"Lier à une Bobine",tagLinked:"Tag lié à la bobine",tagLinkFailed:"Échec lien tag",tagAlreadyLinked:"Tag déjà lié à une autre bobine",unknownTag:"Tag RFID inconnu détecté",usageHistory:"Historique de Consommation",noUsageHistory:"Aucune consommation enregistrée",printName:"Nom Impression",weightConsumed:"Poids consommé",clearHistory:"Effacer",historyCleared:"Historique effacé",fillSourceLabel:"(Inv)",lowStockThresholdError:"Le seuil doit être compris entre 0.1 et 99.9",assignMismatchTitle:"Incompatibilité de matériau",assignMismatchMessage:'Le matériau de la bobine sélectionnée "{{spoolMaterial}}" ne correspond pas au matériau du plateau "{{trayMaterial}}" pour {{location}}. Assigner quand même ?',assignMismatchConfirm:"Assigner quand même",assignPartialMismatchMessage:'Le matériau de la bobine "{{spoolMaterial}}" est similaire, mais ne correspond pas exactement à "{{trayMaterial}}" dans {{location}}. Voulez-vous continuer ?',assignProfileMismatchMessage:'Le profil de la bobine "{{spoolProfile}}" ne correspond pas au profil du plateau "{{trayProfile}}" dans {{location}}. Voulez-vous continuer ?'},timelapse:{title:"Timelapse",create:"Créer Timelapse",download:"Télécharger",delete:"Supprimer",preview:"Aperçu",frameRate:"Images/sec",quality:"Qualité",processing:"Traitement...",noTimelapses:"Aucun timelapse"},ams:{title:"AMS",slot:"Slot",empty:"Vide",emptySlot:"Slot vide",unknown:"Inconnu",humidity:"Humidité",temperature:"Température",filamentType:"Type filament",filamentColor:"Couleur",remaining:"Restant",history:"Historique AMS",noHistory:"Aucun historique",configureSlot:"Configurer Slot",externalSpool:"Bobine externe",profile:"Profil",kFactor:"Facteur K",fill:"Remplir",configure:"Configurer",used:"utilisé",remainingUnit:"restant"},printModal:{title:"Lancer l'impression",selectPrinter:"Choisir l'imprimante",selectPlate:"Choisir le plateau",filamentMapping:"Mapping Filament",totalCost:"Coût total :",slotRemainingShort:" - {{grams}}g rest.",printSettings:"Réglages d'impression",bedLeveling:"Nivellement plateau",flowCalibration:"Calibration débit",vibrationCalibration:"Vibration (Input Shaper)",layerInspection:"Inspection 1ère couche",timelapse:"Timelapse",startPrint:"Démarrer",addToQueue:"Ajouter à la file",cancel:"Annuler",noPrintersAvailable:"Aucune imprimante disponible",printerBusy:"L'imprimante est occupée",printerOffline:"L'imprimante est hors ligne",sameTypeDifferentColor:"Même type, couleur différente",filamentTypeNotLoaded:"Type de filament non chargé",openCalendar:"Ouvrir calendrier",leftNozzle:"G",rightNozzle:"D",leftNozzleTooltip:"Buse gauche",rightNozzleTooltip:"Buse droite",filamentOverride:"Remplacement de filament",filamentOverrideHint:"Remplacez optionnellement les filaments pour l'affectation par modèle. Le planificateur utilisera vos filaments sélectionnés au lieu des valeurs 3MF d'origine.",originalFilament:"Original",overrideWith:"Remplacer par",resetToOriginal:"Revenir à l'original",insufficientFilamentTitle:"Filament insuffisant",insufficientFilamentMessage:"Certaines bobines assignées ont moins de filament restant que nécessaire pour cette impression :",insufficientFilamentLine:"{{printer}} - {{slot}} : nécessite {{required}}g, restant {{remaining}}g",printAnyway:"Imprimer quand même",forceColorMatch:"Forcer correspondance des couleurs",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Échelonner sur {{count}} imprimantes",gcodeInjection:"Injecter le G-code auto-impression"},backup:{title:"Sauvegarde & Restauration",createBackup:"Créer Sauvegarde",restoreBackup:"Restaurer Sauvegarde",restoreDescription:"Remplace les données par un fichier de sauvegarde",downloadBackup:"Télécharger Sauvegarde",uploadBackup:"Téléverser Sauvegarde",lastBackup:"Dernière sauvegarde",autoBackup:"Sauvegarde auto",backupNow:"Sauvegarder maintenant",restoreWarning:"Attention : Écrase TOUTES les données actuelles.",includeArchives:"Inclure Archives",includeSettings:"Inclure Paramètres",includeProfiles:"Inclure Profils",backupSuccess:"Sauvegarde réussie",restoreSuccess:"Restauration réussie",backupFailed:"Échec sauvegarde",restoreFailed:"Échec restauration",restoreNote:"L'imprimante virtuelle sera arrêtée pendant la restauration",githubBackup:"Sauvegarde GitHub",enabled:"Activé",cloudLoginRequired:"Connexion Bambu Cloud requise. Connectez-vous sous Profils → Profils Cloud pour activer la sauvegarde GitHub.",cloudLoginRequiredShort:"Connexion Cloud requise",githubDescription:"Synchronisez automatiquement vos profils vers un dépôt GitHub privé pour la sauvegarde et l'historique des versions.",repositoryUrl:"URL du dépôt",personalAccessToken:"Jeton d'accès personnel",tokenSaved:"(enregistré)",enterNewToken:"Entrez un nouveau jeton pour mettre à jour",tokenHint:"Jeton à granularité fine avec permission de lecture/écriture du contenu",branch:"Branche",manualOnly:"Manuel uniquement",hourly:"Toutes les heures",daily:"Quotidien",weekly:"Hebdomadaire",includeInBackup:"Inclure dans la sauvegarde",kProfiles:"K-Profils",kProfilesDescription:"Calibration de l'avance de pression des imprimantes connectées",noPrintersConnected:"Aucune imprimante connectée",printersConnected:"{{connected}}/{{total}} connectées",cloudProfiles:"Profils Cloud",cloudProfilesDescription:"Préréglages de filament, imprimante et processus depuis Bambu Cloud",appSettings:"Paramètres de l'application",appSettingsDescription:"Configuration Bambuddy (base de données complète)",spoolInventory:"Inventaire des bobines",spoolInventoryDescription:"Bobines de filament, historique d'utilisation et suivi des coûts",printArchives:"Archives d'impression",printArchivesDescription:"Métadonnées de l'historique d'impression (pas de fichiers gcode/3MF)",lastBackupAt:"Dernière sauvegarde :",noBackupsYet:"Aucune sauvegarde pour l'instant",next:"Prochaine :",startingBackup:"Démarrage de la sauvegarde...",test:"Tester",enableBackup:"Activer la sauvegarde",testConnection:"Tester la connexion",enterRepoUrl:"Entrez l'URL du dépôt",enterRepoAndToken:"Entrez l'URL du dépôt et le jeton d'accès",repoRequired:"L'URL du dépôt est requise",tokenRequired:"Le jeton d'accès est requis",githubBackupEnabled:"Sauvegarde GitHub activée",tokenUpdated:"Jeton mis à jour",settingsSaved:"Paramètres enregistrés",failedToSave:"Échec de l'enregistrement : {{message}}",backupCompleteFiles:"Sauvegarde terminée - {{count}} fichiers mis à jour",backupSkippedNoChanges:"Sauvegarde ignorée - aucun changement",backupFailed2:"Échec de la sauvegarde : {{message}}",clearedLogs:"{{count}} journaux supprimés",failedToClearLogs:"Échec de la suppression des journaux : {{message}}",history:"Historique",clear:"Effacer",date:"Date",status:"Statut",commit:"Commit",localBackup:"Sauvegarde locale",localBackupDescription:"Créez une sauvegarde complète de vos données Bambuddy incluant la base de données, les archives, les téléchargements et tous les fichiers.",downloadBackupLabel:"Télécharger la sauvegarde",completeBackupZip:"Sauvegarde complète : base de données + tous les fichiers (ZIP)",download:"Télécharger",preparingBackup:"Préparation de la sauvegarde...",creatingArchive:"Création de l'archive de sauvegarde... Cela peut prendre un moment pour les archives volumineuses.",downloadingFile:"Téléchargement du fichier de sauvegarde...",backupDownloaded:"Sauvegarde téléchargée avec succès",failedToCreateBackup:"Échec de la création de la sauvegarde : {{message}}",restore:"Restaurer",restoreReplacesAll:"La restauration remplace toutes les données.",restoreReplacesAllDetail:"Votre base de données et vos fichiers actuels seront complètement remplacés. Un redémarrage est nécessaire après la restauration.",restoreConfirmTitle:"Restaurer la sauvegarde",restoreConfirmMessage:`Êtes-vous sûr de vouloir restaurer depuis "{{filename}}" ? Cela remplacera complètement votre base de données et tous vos fichiers. L'application devra être redémarrée après la restauration.`,restoreConfirmButton:"Restaurer la sauvegarde",uploadingFile:"Téléchargement du fichier de sauvegarde...",backupRestoredRestart:"Sauvegarde restaurée. Veuillez redémarrer Bambuddy.",failedToRestore:"Échec de la restauration. Veuillez vérifier le format du fichier.",reloadNow:"Recharger maintenant",creatingBackup:"Création de la sauvegarde",restoringBackup:"Restauration de la sauvegarde",preparing:"Préparation...",processing:"Traitement...",doNotClosePage:"Veuillez ne pas fermer cette page ni naviguer ailleurs. Cette opération peut prendre plusieurs minutes pour les sauvegardes volumineuses.",restoring:"Restauration...",restoreComplete:"Restauration terminée",restoreFailed2:"Échec de la restauration",importSettings:"Importer les paramètres depuis un fichier de sauvegarde",pleaseWaitRestoring:"Veuillez patienter pendant la restauration de vos données",selectBackupFile:"Cliquez pour sélectionner un fichier de sauvegarde (.json ou .zip)",duplicateHandling:"Comment fonctionne la gestion des doublons :",matchPrinters:"Imprimantes",matchPrintersBy:"correspondance par numéro de série",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"correspondance par adresse IP",matchNotificationProviders:"Fournisseurs de notifications",matchNotificationProvidersBy:"correspondance par nom",matchFilaments:"Filaments",matchFilamentsBy:"correspondance par nom + type + marque",matchArchives:"Archives",matchArchivesBy:"correspondance par hash de contenu (toujours ignoré)",matchPendingUploads:"Téléchargements en attente",matchPendingUploadsBy:"correspondance par nom de fichier",matchSettingsTemplates:"Paramètres et modèles",matchSettingsTemplatesBy:"toujours écrasés",replaceExisting:"Remplacer les données existantes",keepExisting:"Conserver les données existantes",overwriteDescription:"Écraser les éléments qui existent déjà avec les données de sauvegarde",keepDescription:"Restaurer uniquement les éléments qui n'existent pas encore",overwriteCaution:"Attention :",overwriteWarning:"L'écrasement remplacera vos configurations actuelles par les données de la sauvegarde. Les codes d'accès des imprimantes ne sont jamais écrasés pour des raisons de sécurité.",cancel:"Annuler",processingBackup:"Traitement du fichier de sauvegarde...",itemsRestored:"Éléments restaurés",itemsSkipped:"Éléments ignorés",restored:"Restaurés",skippedAlreadyExist:"Ignorés (existent déjà)",filesCategory:"Fichiers (3MF, miniatures, etc.)",andMore:"...et {{count}} de plus",newApiKeysGenerated:"Nouvelles clés API générées",keysShownOnce:"Ces clés ne sont affichées qu'une seule fois. Copiez-les maintenant !",copy:"Copier",noDataFound:"Aucune donnée à restaurer n'a été trouvée dans le fichier de sauvegarde.",close:"Fermer",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Paramètres",notification_providers:"Fournisseurs de notifications",notification_templates:"Modèles de notifications",smart_plugs:"Smart Plugs",printers:"Imprimantes",filaments:"Filaments",maintenance_types:"Types de maintenance",archives:"Archives",projects:"Projets",pending_uploads:"Téléchargements en attente",external_links:"Liens externes",api_keys:"Clés API"}},tags:{title:"Tags",addTag:"Ajouter Tag",editTag:"Modifier Tag",deleteTag:"Supprimer Tag",tagName:"Nom du Tag",tagColor:"Couleur du Tag",noTags:"Aucun tag",deleteConfirm:"Supprimer ce tag ?",manageTags:"Gérer les Tags"},uploadModal:{title:"Téléverser des fichiers 3MF",dragDrop:"Glissez les fichiers .3mf ici",or:"ou",browseFiles:"Parcourir",extractionInfo:"Le modèle d'imprimante est extrait des métadonnées 3MF.",uploaded:"téléversé",failed:"échoué",uploading:"En cours...",upload:"Téléverser",uploadFailed:"Échec du téléversement"},editArchive:{title:"Modifier l'archive",name:"Nom",namePlaceholder:"Nom de l'impression",printer:"Imprimante",noPrinter:"Aucune imprimante",project:"Projet",noProject:"Aucun projet",itemsPrinted:"Nombre de pièces",itemsPrintedHelp:"Nombre d'objets produits",notes:"Notes",notesPlaceholder:"Notes sur l'impression...",externalLink:"Lien externe",externalLinkPlaceholder:"https://...",externalLinkHelp:"Lien vers Printables, Thingiverse, etc.",tags:"Tags",tagsPlaceholder:"Ajouter des tags...",addMoreTags:"Plus de tags...",matchingTags:'Correspondant à "{{query}}"',existingTags:"Tags existants",clickToAdd:"(cliquer pour ajouter)",status:"Statut",failureReason:"Raison de l'échec",selectReason:"Choisir raison...",photos:"Photos du résultat",photosHelp:"Cliquez sur + pour ajouter des photos",printResult:"Résultat d'impression",saving:"Enregistrement...",failureReasons:{adhesionFailure:"Défaut d'adhésion",spaghettiDetached:"Spaghetti / Détaché",layerShift:"Décalage de couche",cloggedNozzle:"Buse bouchée",filamentRunout:"Filament fini",warping:"Warping (Déformation)",stringing:"Stringing (Cheveux d'ange)",underExtrusion:"Sous-extrusion",powerFailure:"Coupure courant",userCancelled:"Annulé par l'utilisateur",other:"Autre"},statuses:{completed:"Réussie",failed:"Échouée",aborted:"Annulée",printing:"Impression"}},kProfiles:{title:"K-Profiles",noPrintersConfigured:"Aucune imprimante configurée",addPrinterInSettings:"Ajoutez une imprimante pour gérer les K-profiles",noActivePrinters:"Aucune imprimante active",enablePrinterConnection:"Activez la connexion pour voir les K-profiles",loadingProfiles:"Chargement des K-Profiles...",printerOffline:"Imprimante hors ligne",printerOfflineDesc:"L'imprimante doit être allumée.",noMatchingProfiles:"Aucun profil correspondant",noMatchingProfilesDesc:"Ajustez votre recherche",noKProfiles:"Aucun K-Profile",noKProfilesDesc:"Aucun profil trouvé pour une buse de {{diameter}}mm",createFirstProfile:"Créer le premier profil",printer:"Imprimante",nozzle:"Buse",refresh:"Rafraîchir",addProfile:"Ajouter Profil",export:"Exporter",import:"Importer",select:"Choisir",selectAll:"Tout sélectionner",delete:"Supprimer",searchPlaceholder:"Nom ou filament...",allExtruders:"Tous les extrudeurs",leftOnly:"Gauche uniquement",rightOnly:"Droite uniquement",allFlow:"Tout débit",hfOnly:"HF uniquement",sOnly:"S uniquement",sortName:"Tri : Nom",sortKValue:"Tri : Valeur K",sortFilament:"Tri : Filament",leftExtruder:"Extrudeur gauche",rightExtruder:"Extrudeur droit",modal:{addTitle:"Ajouter K-Profile",editTitle:"Modifier K-Profile",profileName:"Nom du profil",profileNamePlaceholder:"ex: Mon profil PLA",kValue:"Valeur K",kValuePlaceholder:"0.020",kValueHelp:"Plage type : 0.01-0.06 (PLA), 0.02-0.10 (PETG)",filament:"Filament",selectFilament:"Choisir filament...",noFilamentsHelp:"Créez d'abord un profil dans Bambu Studio.",flowType:"Type de débit",highFlow:"Haut Débit (HF)",standard:"Standard",nozzleSize:"Taille buse",extruder:"Extrudeur",extruders:"Extrudeurs",left:"Gauche",right:"Droite",notes:"Notes (locales)",notesPlaceholder:"Notes sur ce profil...",notesHelp:"Enregistré dans Bambuddy, pas sur l'imprimante",syncing:"Sync avec l'imprimante...",savingExtruder:"Sauvegarde extrudeur {{current}}/{{total}}...",pleaseWait:"Patientez..."},deleteConfirm:{title:"Supprimer profil",cannotUndo:"Action irréversible",message:`Supprimer "{{name}}" de l'imprimante ?`},bulkDelete:{title:"Supprimer les profils",cannotUndo:"Action irréversible",message:"Supprimer les {{count}} profils de l'imprimante ?"},toast:{profileSaved:"Profil K enregistré",profilesSaved:"Profil K enregistré sur {{count}} extrudeur(s)",selectAtLeastOneExtruder:"Sélectionnez un extrudeur",profileDeleted:"Profil K supprimé",profilesDeleted:"{{count}} profils supprimés",exportedProfiles:"{{count}} profils exportés",importedProfiles:"{{count}} sur {{total}} profils importés",noProfilesToExport:"Rien à exporter",invalidFileFormat:"Format invalide",failedToParseImport:"Échec analyse fichier",failedToSaveBatch:"Échec enregistrement groupé",noteSaved:"Note enregistrée",failedToSaveNote:"Échec note"},permission:{noRead:"Pas d'autorisation lecture",noCreate:"Pas d'autorisation création",noUpdate:"Pas d'autorisation mise à jour",noDelete:"Pas d'autorisation suppression",noExport:"Pas d'autorisation export",noImport:"Pas d'autorisation import"}},virtualPrinter:{title:"Imprimante Virtuelle",running:"En cours",stopped:"Arrêtée",description:{default:"Active une imprimante qui apparaît dans Bambu Studio. Les fichiers envoyés sont archivés sans impression.",proxy:"Active un proxy qui relaie le trafic vers une imprimante réelle, permettant l'impression à distance."},enable:{title:"Activer l'imprimante virtuelle",visibleInSlicer:'Visible comme "Bambuddy" dans le Slicer',proxyingTo:"Proxy vers {{name}}",notActive:"Inactive"},model:{title:"Modèle d'imprimante",description:"Choisissez le modèle à émuler.",restartWarning:"Changer le modèle redémarrera le service"},accessCode:{title:"Code d'accès",isSet:"Code défini",notSet:"Code requis pour activer",placeholder:"Code 8 char",placeholderChange:"Entrez nouveau code",hint:"Exactement 8 caractères. Sert à l'auth du Slicer.",charCount:"({{count}}/8)"},targetPrinter:{title:"Imprimante cible",configured:"Cible configurée",notConfigured:"Imprimante requise pour mode Proxy",placeholder:"Choisir imprimante...",hint:"L'imprimante doit être en mode LAN.",noPrinters:"Ajoutez une imprimante réelle d'abord."},remoteInterface:{title:"Exception Interface Réseau",configured:"Override actif",optional:"Optionnel - si IP auto est fausse (VPN, Docker, multi-NIC).",placeholder:"Auto (défaut)...",hint:"Force l'IP annoncée via SSDP."},mode:{title:"Mode",archive:"Archiver",archiveDesc:"Archive immédiatement",review:"Revue",reviewDesc:"Attendre revue avant archive",queue:"File",queueDesc:"Archiver et ajouter à la file",proxy:"Proxy",proxyDesc:"Relais vers imprimante réelle"},autoDispatch:{title:"Lancement automatique",description:"Lancer automatiquement les impressions ajoutées à la file. Désactivé, les impressions attendent un lancement manuel."},tailscaleDisabled:{title:"Intégration Tailscale",description:"Lorsqu'activé, utilise Tailscale pour des certificats TLS de confiance. Désactiver pour n'utiliser que des certificats auto-signés."},setupRequired:{title:"Configuration requise",description:"Nécessite des réglages système (ports, pare-feu).",readGuide:"Lire le guide de configuration"},howItWorks:{title:"Fonctionnement",step1:"Sur le même LAN, les imprimantes virtuelles apparaissent automatiquement dans votre slicer (Bambu Studio / OrcaSlicer). Depuis d'autres réseaux, ajoutez-les manuellement par adresse IP et code d'accès.",step2:`En mode Archive, Revue et File d'attente, utilisez le bouton "Envoyer" dans votre slicer pour envoyer des fichiers 3MF à Bambuddy. Le slicer affichera "Impression réussie" — le fichier est stocké, pas imprimé.`,step3:"En mode Proxy, l'imprimante virtuelle relaie tout le trafic vers une vraie imprimante — les impressions démarrent immédiatement comme en connexion directe."},status:{title:"Détails du statut",printerName:"Nom",model:"Modèle",serialNumber:"Série",mode:"Mode",pendingFiles:"Fichiers en attente",targetPrinter:"Cible",ftpPort:"Port FTP",mqttPort:"Port MQTT",ftpConnections:"Connexions FTP",mqttConnections:"Connexions MQTT"},toast:{updated:"Réglages virtuels mis à jour",failedToUpdate:"Échec mise à jour",tailscaleNotAvailable:"Tailscale n'est pas installé sur cet hôte. Installez Tailscale puis réessayez.",copyFailed:"Échec de la copie — veuillez sélectionner le texte manuellement",accessCodeRequired:"Code d'accès requis",targetPrinterRequired:"Imprimante cible requise",bindIpRequired:"Veuillez d'abord définir une adresse IP",accessCodeEmpty:"Le code ne peut pas être vide",accessCodeLength:"Le code doit faire 8 caractères",created:"Imprimante virtuelle créée",failedToCreate:"Échec de la création de l'imprimante virtuelle",deleted:"Imprimante virtuelle supprimée",failedToDelete:"Échec de la suppression de l'imprimante virtuelle"},list:{title:"Imprimantes virtuelles",add:"Ajouter",addFirst:"Ajouter une imprimante virtuelle",empty:"Aucune imprimante virtuelle configurée. Ajoutez-en une pour commencer."},bindIp:{title:"Interface réseau",placeholder:"Sélectionner interface...",hint:"Interface réseau sur laquelle cette imprimante virtuelle écoute. Doit être unique par imprimante."},proxy:{accessCodeHint:"En mode proxy, utilisez le code d'accès de l'imprimante cible dans le slicer. La connexion est transmise de manière transparente à l'imprimante réelle."},addDialog:{title:"Ajouter une imprimante virtuelle",name:"Nom",hint:"Vous pourrez configurer le code d'accès, l'imprimante cible et d'autres paramètres après la création.",create:"Créer"},deleteConfirm:{title:"Supprimer l'imprimante virtuelle",message:'Êtes-vous sûr de vouloir supprimer "{{name}}" ? Cela arrêtera tous les services de cette imprimante.'},archiveNameSource:{title:"Source du nom d'archive",description:`Choisissez comment les nouvelles archives sont nommées lorsque les fichiers arrivent via l'imprimante virtuelle. "Métadonnées" utilise le titre intégré par le slicer dans le 3MF (par défaut). "Nom de fichier" utilise le nom envoyé par Bambu Studio en FTP — pratique si vous avez renommé le job dans la boîte "envoyer à l'imprimante".`,metadata:"Métadonnées",filename:"Nom de fichier"}},modelViewer:{openInSlicer:"Ouvrir dans le Slicer",tabs:{model:"Modèle 3D",gcode:"Aperçu G-code"},notAvailable:"indisponible",notSliced:"pas découpé",plates:"Plateaux",allPlates:"Tous les plateaux",plateNumber:"Plateau {{number}}",plateCount:"{{count}} plateau",plateCount_other:"{{count}} plateaux",objectCount:"{{count}} objet",objectCount_other:"{{count}} objets",filamentCount:"{{count}} filament",filamentCount_other:"{{count}} filaments",eta:"Fin {{minutes}} min",noPreview:"Aucun aperçu pour ce fichier",pagination:{pageOf:"Page {{current}} sur {{total}}",prev:"Préc",next:"Suiv"},errors:{failedToLoad:"Échec chargement fichier",noMeshes:"Aucun maillage trouvé dans le 3MF",unsupportedFormat:"Format non supporté"}},maintenanceDescriptions:{lubricateCarbonRods:"Appliquer du lubrifiant sur les tiges carbone pour un mouvement fluide",lubricateRails:"Appliquer du lubrifiant sur les rails linéaires",cleanNozzle:"Nettoyer buse et hotend anti-bouchage",checkBelts:"Tension des courroies pour la précision",cleanBuildPlate:"Nettoyage plateau pour l'adhésion",checkExtruder:"Usure des engrenages de l'extrudeur",checkCooling:"Bon fonctionnement des ventilateurs",generalInspection:"Inspection générale de la machine",cleanCarbonRods:"Nettoyer les tiges carbone (friction)",lubricateSteelRods:"Appliquer du lubrifiant sur les tiges en acier pour un mouvement fluide",cleanSteelRods:"Nettoyer les tiges en acier (friction)",cleanLinearRails:"Essuyer les rails linéaires (poussière/débris)",checkPtfeTube:"Usure ou dommage du tube PTFE",replaceHepaFilter:"Filtre HEPA pour la qualité de l'air",replaceCarbonFilter:"Filtre charbon actif (odeurs)",lubricateLeftNozzleRail:"Lubrifier le rail de buse gauche (Série H2)"},smartPlugs:{offline:"Hors ligne",admin:"Admin",openPlugAdminPage:"Page admin de la prise",deleteSmartPlug:"Supprimer la prise",turnOnSmartPlug:"Allumer la prise",turnOffSmartPlug:"Éteindre la prise",turnOn:"Allumer",turnOff:"Éteindre",addSmartPlug:{scanningNetwork:"Scan réseau...",chooseEntity:"Choisir une entité...",connectionFailed:"Échec connexion",searchEntities:"Chercher entités...",searchPowerSensors:"Capteurs puissance...",searchEnergySensors:"Capteurs énergie...",placeholders:{plugName:"Prise Salon",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Identique au topic puissance, ou différent"}},linkedTo:"Lié à :",monitorOnly:"Surveillance uniquement",alerts:"Alertes",scheduleOn:"On {{time}}",scheduleOff:"Off {{time}}",on:"On",off:"Off",power:"Puissance",kwhToday:"kWh Aujourd'hui",settings:"Paramètres",automationSettings:"Paramètres d'automatisation",showInSwitchbar:"Afficher dans la barre de commutateurs",quickAccessSidebar:"Accès rapide depuis la barre latérale",enabled:"Activé",enableAutomation:"Activer l'automatisation pour cette prise",autoOn:"Auto On",autoOnDescription:"Allumer au démarrage de l'impression",autoOff:"Auto Off",autoOffDescription:"Éteindre à la fin de l'impression (unique)",autoOffPersistent:"Garder activé",autoOffPersistentDescription:"Rester activé entre les impressions au lieu d'une seule fois",turnOffDelayMode:"Mode de délai d'extinction",time:"Temps",temp:"Temp",delayMinutes:"Délai (minutes)",tempThreshold:"Seuil de température (°C)",tempThresholdDescription:"S'éteint lorsque la buse refroidit en dessous de cette température",edit:"Modifier",deleteConfirm:'Êtes-vous sûr de vouloir supprimer "{{name}}" ? Cette action est irréversible.',turnOnConfirm:'Êtes-vous sûr de vouloir allumer "{{name}}" ?',turnOffConfirm:`Êtes-vous sûr de vouloir éteindre "{{name}}" ? Cela coupera l'alimentation de l'appareil connecté.`,failedToTurn:'Impossible de {{action}} "{{name}}"',unknown:"Inconnu",addTitle:"Ajouter une prise connectée",editTitle:"Modifier la prise connectée",stopScanning:"Arrêter le scan",discoverTasmota:"Découvrir les appareils Tasmota",foundDevices:"{{count}} appareil(s) trouvé(s) - cliquez pour sélectionner :",noDevicesFound:"Aucun appareil Tasmota trouvé sur votre réseau",haNotConfigured:"Home Assistant n'est pas configuré. Configurez-le dans",haSettingsPath:"Paramètres → Réseau → Home Assistant",selectEntity:"Sélectionner l'entité *",ipAddress:"Adresse IP *",nameLabel:"Nom *",username:"Nom d'utilisateur",password:"Mot de passe",authHint:"Laissez vide si votre appareil Tasmota ne nécessite pas d'authentification",linkToPrinter:"Lier à l'imprimante",noPrinter:"Pas d'imprimante (contrôle manuel uniquement)",linkingDescription:"La liaison permet l'allumage/extinction automatique au début/fin de l'impression",powerAlerts:"Alertes de puissance",alertAbove:"Alerte si au-dessus (W)",alertBelow:"Alerte si en dessous (W)",alertDescription:"Recevoir une notification lorsque la consommation dépasse ces seuils. Laisser vide pour désactiver cette direction.",dailySchedule:"Planification quotidienne",turnOnAt:"Allumer à",turnOffAt:"Éteindre à",scheduleDescription:"Allumer/éteindre automatiquement la prise à ces heures chaque jour. Laisser vide pour ignorer cette action.",showOnPrinterCard:"Afficher sur la carte imprimante",displayOnPrinterCard:"Afficher le bouton sur la carte imprimante",connectedResult:"Connecté !",deviceLabel:"Appareil : {{name}} - ",stateLabel:"État : {{state}}",test:"Tester",delete:"Supprimer",save:"Enregistrer",add:"Ajouter",cancel:"Annuler",failedToStartScan:"Impossible de démarrer le scan",nameRequired:"Le nom est requis",entityRequired:"L'entité est requise pour les prises Home Assistant",mqttTopicRequired:"Au moins un topic MQTT doit être configuré pour la puissance, l'énergie ou la surveillance d'état",loadingEntities:"Chargement des entités...",loading:"Chargement...",failedToLoadEntities:"Échec du chargement des entités : {{error}}",noEntitiesMatching:'Aucune entité trouvée correspondant à "{{search}}"',noEntitiesAvailable:"Aucune entité disponible",searchingEntities:"Recherche de toutes les entités ({{count}} trouvées)",showingEntities:"Affichage switch, light, input_boolean ({{count}} disponibles)",energyMonitoringOptional:"Surveillance énergétique (Optionnel)",energyMonitoringHint:"Recherchez et sélectionnez les capteurs fournissant des données de puissance/énergie.",powerSensorW:"Capteur de puissance (W)",energyTodayKwh:"Énergie aujourd'hui (kWh)",totalEnergyKwh:"Énergie totale (kWh)",noMatchingSensors:"Aucun capteur correspondant",none:"Aucun",mqttNotConfigured:"Broker MQTT non configuré. Définissez l'adresse du broker dans",mqttSettingsPath:"Paramètres → Réseau → Publication MQTT",mqttNotConfiguredSuffix:"(vous n'avez pas besoin d'activer la publication, remplissez simplement les détails du broker).",mqttMonitorOnlyDescription:"Les prises MQTT reçoivent les données de puissance/énergie via un abonnement MQTT. Le contrôle on/off n'est pas disponible - utilisez votre broker MQTT ou système domotique.",powerMonitoring:"Surveillance de puissance",energyMonitoring:"Surveillance énergétique",stateMonitoring:"Surveillance d'état",optional:"optionnel",topic:"Topic",jsonPath:"Chemin JSON",multiplier:"Multiplicateur",onValue:"Valeur ON",mqttPowerHint:`Le chemin JSON extrait la valeur du payload JSON (ex: "power_l1"). Laisser vide si le topic publie des valeurs numériques brutes.
 Utiliser le multiplicateur 0.001 pour mW→W, 1000 pour kW→W.`,mqttEnergyHint:`Le chemin JSON extrait la valeur du payload JSON. Laisser vide pour les valeurs brutes.
 Utiliser le multiplicateur 0.001 pour Wh→kWh, 1000 pour MWh→kWh.`,mqttStateHint:`Le chemin JSON extrait la valeur du payload JSON. Laisser vide pour les valeurs brutes.
-Valeur ON : la chaîne exacte signifiant "ON". Laisser vide pour la détection auto (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"URL de puissance",restPowerPath:"Power JSON Path",restPowerMultiplier:"Multiplicateur de puissance",restEnergyUrl:"URL d'énergie",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Multiplicateur d'énergie",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"URL séparée pour les données de puissance (utilise l'URL de statut si vide)",restEnergyUrlHint:"URL séparée pour les données d'énergie (utilise l'URL de statut si vide)",restEnergyHint:"Chaque valeur peut utiliser sa propre URL ou se rabattre sur l'URL de statut. Utilisez les multiplicateurs pour la conversion d'unités (ex : 0.001 pour convertir Wh en kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"Aucun commutateur dans la barre",enableSwitchbarHint:'Activez "Afficher dans la barre de commutateurs" dans Paramètres > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notifications par e-mail SMTP",telegram:"Notifications via un bot Telegram",discord:"Envoyer vers un canal Discord via webhook",ntfy:"Notifications push gratuites, auto-hébergeables",pushover:"Notifications push simples et fiables",callmebot:"Notifications WhatsApp gratuites via CallMeBot",webhook:"POST HTTP générique vers n'importe quelle URL",homeassistant:"Notifications persistantes dans le tableau de bord Home Assistant"},lastSuccess:"Dernier : {{date}}",error:"Erreur",printer:"Imprimante :",allPrinters:"Toutes les imprimantes",sendTestNotification:"Envoyer une notification de test",eventSettings:"Paramètres des événements",enabled:"Activé",sendFromProvider:"Envoyer des notifications depuis ce fournisseur",printEvents:"Événements d'impression",printerStatus:"État de l'imprimante",amsAlarms:"Alarmes AMS",amsHtAlarms:"Alarmes AMS-HT",printQueue:"File d'attente d'impression",start:"Début",plateCheck:"Vérification du plateau",complete:"Terminé",failed:"Échoué",stopped:"Arrêté",progress:"Progression",offline:"Hors ligne",lowFilament:"Filament bas",maintenance:"Maintenance",amsHumidity:"Humidité AMS",amsTemp:"Temp. AMS",amsHtHumidity:"Humidité AMS-HT",amsHtTemp:"Temp. AMS-HT",bedCooled:"Plateau refroidi",firstLayer:"Première couche",quiet:"Silencieux",digest:"Résumé {{time}}",printStarted:"Impression démarrée",plateNotEmpty:"Plateau non vide",plateNotEmptyDescription:"Objets détectés avant l'impression",printCompleted:"Impression terminée",bedCooledLabel:"Plateau refroidi",bedCooledDescription:"Plateau refroidi sous le seuil après l'impression",firstLayerCompleteLabel:"Première couche terminée",firstLayerCompleteDescription:"Notification avec photo après la première couche",missingSpoolAssignmentLabel:"Affectation de bobine manquante",missingSpoolAssignmentDescription:"Notifier quand une impression démarre et que des bacs requis n'ont pas de bobine assignée",printFailed:"Impression échouée",printStopped:"Impression arrêtée",progressMilestones:"Jalons de progression",progressMilestonesDescription:"Notifier à 25 %, 50 %, 75 %",printerOffline:"Imprimante hors ligne",printerError:"Erreur de l'imprimante",lowFilamentLabel:"Filament bas",maintenanceDue:"Maintenance requise",maintenanceDueDescription:"Notifier lorsqu'une maintenance est nécessaire",amsHumidityHigh:"Humidité AMS élevée",amsHumidityHighDescription:"L'humidité de l'AMS standard dépasse le seuil",amsTemperatureHigh:"Température AMS élevée",amsTemperatureHighDescription:"La température de l'AMS standard dépasse le seuil",amsHtHumidityHigh:"Humidité AMS-HT élevée",amsHtHumidityHighDescription:"L'humidité de l'AMS-HT dépasse le seuil",amsHtTemperatureHigh:"Température AMS-HT élevée",amsHtTemperatureHighDescription:"La température de l'AMS-HT dépasse le seuil",jobAdded:"Tâche ajoutée",jobAddedDescription:"Tâche ajoutée à la file d'attente",jobAssigned:"Tâche assignée",jobAssignedDescription:"Tâche basée sur le modèle assignée à l'imprimante",jobStarted:"Tâche démarrée",jobStartedDescription:"La tâche de la file a commencé l'impression",jobWaiting:"Tâche en attente",jobWaitingDescription:"Tâche en attente de filament ou imprimante",jobSkipped:"Tâche ignorée",jobSkippedDescription:"Tâche ignorée (échec précédent)",jobFailed:"Tâche échouée",jobFailedDescription:"La tâche n'a pas pu démarrer",queueComplete:"File d'attente terminée",queueCompleteDescription:"Toutes les tâches de la file sont terminées",quietHours:"Heures silencieuses",noNotificationsDuring:"Aucune notification pendant ces heures",editProviderToChangeQuietHours:"Modifier le fournisseur pour changer les heures silencieuses",dailyDigest:"Résumé quotidien",batchNotifications:"Regrouper les notifications en un seul résumé quotidien",sendAt:"Envoyer à {{time}}",editProviderToChangeDigestTime:"Modifier le fournisseur pour changer l'heure du résumé",edit:"Modifier",deleteProvider:"Supprimer le fournisseur de notifications",deleteConfirm:"Êtes-vous sûr de vouloir supprimer « {{name}} » ? Cette action est irréversible.",delete:"Supprimer",addTitle:"Ajouter un fournisseur de notifications",editTitle:"Modifier le fournisseur de notifications",nameLabel:"Nom *",namePlaceholder:"Mes notifications",providerTypeLabel:"Type de fournisseur *",configuration:"Configuration",testConfiguration:"Tester la configuration",printerFilter:"Filtre d'imprimante",onlyFromPrinter:"Envoyer uniquement les notifications pour les événements de cette imprimante",quietHoursDnd:"Heures silencieuses (Ne pas déranger)",quietStart:"Début",quietEnd:"Fin",dailyDigestLabel:"Résumé quotidien",sendDigestAt:"Envoyer le résumé à",digestCollected:"Les événements seront collectés et envoyés en un seul résumé à cette heure",notificationEvents:"Événements de notification",progressPercent:"(25 %, 50 %, 75 %)",bedCooledAfterPrint:"(après la fin de l'impression)",eventPriority:{sectionTitle:"Priorité ntfy",helpNtfy:"Choisissez une priorité pour chaque événement activé. ntfy l'utilise pour faire remonter les alertes (son, visibilité, comportement push). Les niveaux non définis ici utilisent la valeur par défaut du serveur ntfy.",min:"Min",low:"Basse",default:"Par défaut",high:"Haute",urgent:"Urgente"},cancel:"Annuler",save:"Enregistrer",add:"Ajouter",nameRequired:"Le nom est requis",fieldRequired:"{{field}} est requis",phoneNumber:"Numéro de téléphone",apiKey:"Clé API",serverUrl:"URL du serveur",topic:"Sujet",authToken:"Jeton d'authentification",userKey:"Clé utilisateur",appToken:"Jeton d'application",priority:"Priorité",botToken:"Jeton du bot",chatId:"ID du chat",smtpServer:"Serveur SMTP",smtpPort:"Port SMTP",security:"Sécurité",authentication:"Authentification",username:"Nom d'utilisateur",password:"Mot de passe",fromEmail:"E-mail expéditeur",toEmail:"E-mail destinataire",webhookUrl:"URL du webhook",payloadFormat:"Format du payload",authorization:"Autorisation",titleFieldName:"Nom du champ titre",messageFieldName:"Nom du champ message",editTemplate:"Modifier le modèle : {{name}}",titleLabel:"Titre",bodyLabel:"Corps",titlePlaceholder:"Titre de la notification...",bodyPlaceholder:"Corps de la notification...",availableVariables:"Variables disponibles",clickToInsert:"Cliquer pour insérer à la position du curseur dans le corps",livePreview:"Aperçu en direct",hide:"Masquer",show:"Afficher",loadingPreview:"Chargement de l'aperçu...",enterTemplateContent:"Saisir le contenu du modèle pour voir l'aperçu",titlePreview:"Titre :",bodyPreview:"Corps :",resetToDefault:"Réinitialiser par défaut",titleRequired:"Le titre est requis",bodyRequired:"Le corps est requis",notificationLog:"Journal des notifications",showFailedOnly:"Échecs uniquement",last24Hours:"Dernières 24 heures",last7Days:"7 derniers jours",last30Days:"30 derniers jours",last90Days:"90 derniers jours",justNow:"À l'instant",noFailedNotifications:"Aucune notification échouée",noNotificationsLogged:"Aucune notification enregistrée",unknownProvider:"Fournisseur inconnu",logTitle:"Titre",logMessage:"Message",logError:"Erreur",logProvider:"Fournisseur : {{type}}",logTime:"Heure : {{time}}",refresh:"Actualiser",clearOld:"Purger les anciens",statsSummary:"{{days}} derniers jours :",statsNotifications:"notifications",statsSent:"{{count}} envoyées",statsFailed:"{{count}} échouées",eventTypes:{print_start:"Impression démarrée",print_complete:"Impression terminée",print_failed:"Impression échouée",print_stopped:"Impression arrêtée",print_progress:"Progression",printer_offline:"Imprimante hors ligne",printer_error:"Erreur de l'imprimante",filament_low:"Filament bas",maintenance_due:"Maintenance requise",test:"Test"},userEmail:{title:"Notifications",emailNotifications:"Notifications par e-mail",emailNotificationsDesc:"Recevez des notifications par e-mail pour vos propres travaux d'impression. Les e-mails sont envoyés via les paramètres SMTP configurés dans l'authentification avancée.",sendingTo:"Les notifications seront envoyées à",noEmailWarning:"Votre compte n'a pas d'adresse e-mail. Contactez un administrateur pour en ajouter une.",printJobNotifications:"Notifications de travaux d'impression",printJobNotificationsDesc:"Choisissez quels événements déclenchent des notifications par e-mail pour les travaux d'impression que vous soumettez.",printJobStarts:"Démarrage du travail d'impression",printJobStartsDesc:"Être notifié quand votre travail d'impression commence.",printJobFinishes:"Fin du travail d'impression",printJobFinishesDesc:"Être notifié quand votre travail d'impression se termine avec succès.",printErrors:"Erreurs d'impression",printErrorsDesc:"Être notifié quand votre travail d'impression échoue ou rencontre une erreur.",printJobStops:"Travail d'impression arrêté",printJobStopsDesc:"Être notifié quand votre travail d'impression est annulé ou arrêté.",saveSuccess:"Préférences de notification sauvegardées.",saveError:"Impossible de sauvegarder les préférences de notification."}},richTextEditor:{bold:"Gras",italic:"Italique",underline:"Souligné",bulletList:"Liste à puces",numberedList:"Liste numérotée",alignLeft:"Aligner à gauche",alignCenter:"Centrer",alignRight:"Aligner à droite",addLink:"Ajouter lien",removeLink:"Retirer lien"},externalLinks:{noLinksConfigured:"Aucun lien externe configuré",deleteLink:"Supprimer lien",removeCustomIcon:"Retirer icône personnalisée",openInNewTab:"Ouvrir dans un nouvel onglet",placeholders:{linkName:"Mon Lien"}},keyboardShortcuts:{title:"Raccourcis Clavier",navigation:"Navigation",archivesSection:"Archives",kProfilesSection:"K-Profiles",generalSection:"Général",shortcuts:{goToPrinters:"Aller aux Imprimantes",goToArchives:"Aller aux Archives",goToQueue:"Aller à la File",goToStats:"Aller aux Stats",goToProfiles:"Aller aux Profils Cloud",goToSettings:"Aller aux Paramètres",focusSearch:"Focus recherche",openUploadModal:"Ouvrir téléversement",clearSelection:"Tout déselectionner",contextMenu:"Menu contextuel (cartes)",refreshProfiles:"Rafraîchir profils",newProfile:"Nouveau profil",exitSelectionMode:"Quitter mode sélection",showHelp:"Afficher cette aide"},footer:"Échap ou clic extérieur pour fermer"},notificationLog:{title:"Journal de Notification",events:{printStarted:"Début impression",printComplete:"Fin impression",printFailed:"Échec impression",printStopped:"Arrêt impression",progress:"Progression",printerOffline:"Hors ligne",printerError:"Erreur",lowFilament:"Filament bas",maintenanceDue:"Maintenance",test:"Test"},timeAgo:{justNow:"À l'instant",minutesAgo:"Il y a {{minutes}}m",hoursAgo:"Il y a {{hours}}h"}},restoreBackup:{title:"Restaurer Sauvegarde",restoring:"Restauration...",restoreComplete:"Restauration terminée",restoreFailed:"Échec restauration",importSettings:"Importer les réglages d'un fichier",pleaseWait:"Patientez pendant la restauration",clickToSelect:"Fichier .json ou .zip",howDuplicateHandling:"Gestion des doublons :",categories:{printers:"Imprimantes",smartPlugs:"Prises",notificationProviders:"Fournisseurs",filaments:"Filaments",archives:"Archives",pendingUploads:"Téléversements en attente",settingsTemplates:"Réglages & Modèles"},matchingInfo:{printers:"par numéro de série",smartPlugs:"par adresse IP",notificationProviders:"par nom",filaments:"par nom+type+marque",archives:"par empreinte numérique (hash)",pendingUploads:"par nom de fichier",settingsTemplates:"toujours écrasés"},replaceExisting:"Remplacer existant",keepExisting:"Garder existant",replaceDescription:"Écrase les doublons avec la sauvegarde",keepDescription:"Ne restaure que les éléments absents",caution:"Attention :",cautionText:"L'écrasement remplacera vos réglages. Les codes d'accès imprimantes sont exclus par sécurité.",itemsRestored:"Éléments restaurés",itemsSkipped:"Éléments ignorés",restored:"Restaurés",skipped:"Ignorés (déjà présents)",filesLabel:"Fichiers (3MF, vignettes, etc.)",newApiKeysGenerated:"Nouvelles clés API générées",newApiKeysWarning:"Copiées maintenant, elles ne seront plus visibles !",processingBackup:"Traitement du fichier...",noDataFound:"Aucune donnée trouvée dans le fichier.",failedToRestore:"Échec restaure. Vérifiez le format."},backupExport:{title:"Exporter Sauvegarde",selectData:"Données à inclure",selectAll:"Tout sélectionner",selectNone:"Ne rien sélectionner",categoryDescriptions:{settings:"Langue, thèmes, préférences",notifications:"ntfy, Pushover, Discord, etc.",templates:"Modèles de messages personnalisés",smartPlugs:"Configuration des prises Tasmota",externalLinks:"Liens externes de la barre latérale",printers:"Infos imprimantes (codes d'accès exclus par défaut)",plateDetection:"Images références des plateaux vides",filaments:"Types et coûts filaments",maintenance:"Plannings de maintenance personnalisés",archives:"Données impressions + fichiers (3MF, vignettes, etc.)",projects:"Projets, BOM, pièces jointes",pendingUploads:"En attente revue virtuelle",apiKeys:"Clés Webhook (nouvelles clés générées à l'import)"},requiresPrinters:"Nécessite sélection des imprimantes",zipFileWarning:"Fichier ZIP créé.",zipFileDescription:"Contient tous les médias. Peut être volumineux.",includeAccessCodes:"Inclure Codes d'accès",includeAccessCodesDescription:"Pour migrer vers une autre machine",includeAccessCodesWarning:"Codes en texte clair. Sécurisez ce fichier !",categoriesSelected:"{{selectedCount}} catégories choisies"},pendingUploads:{placeholders:{notes:"Notes sur l'impression..."},discardUpload:"Rejeter",archiveAllUploads:"Tout archiver",discardAllUploads:"Tout rejeter",archive:"Archiver",timeAgo:{justNow:"À l'instant",minutesAgo:"Il y a {{minutes}}m",hoursAgo:"Il y a {{hours}}h",daysAgo:"Il y a {{days}}j"}},apiBrowser:{placeholders:{requestBody:"Corps JSON...",searchEndpoints:"Chercher endpoints..."}},configureAmsSlot:{title:"Configurer le slot AMS",slotConfigured:"Slot configuré !",configuringSlot:"Configuration du slot :",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Chercher presets...",colorPlaceholder:"Nom couleur ou hex (ex: brown, FF8800)",clearCustomColor:"Effacer couleur perso",noCloudPresets:"Profils Cloud absents. Connectez-vous.",noPresetsAvailable:"Aucun preset disponible. Connectez-vous à Bambu Cloud ou importez des profils locaux.",noMatchingPresets:"Aucun profil trouvé.",custom:"Perso",builtin:"Inclus",settingsSentToPrinter:"Réglages envoyés",filamentProfile:"Profil Filament",kProfileLabel:"Profil K (Pressure Advance)",filteringFor:"Filtrage pour : {{material}}",noKProfile:"Pas de profil K (utiliser défaut 0.020)",noMatchingKProfiles:"Aucun profil K trouvé. K=0.020 par défaut sera utilisé.",selectFilamentFirst:"Sélectionnez d'abord un profil filament",kFromCalibration:"K={{value}} de la calibration imprimante",customColorLabel:"Couleur personnalisée (optionnel)",presetColors:"Couleurs {{name}} :",showLessColors:"Moins de couleurs",showMoreColors:"Plus de couleurs",clear:"Effacer",hexLabel:"Hex : #{{hex}}",resetting:"Réinitialisation...",resetSlot:"Réinitialiser le slot",cancel:"Annuler",configuring:"Configuration...",configureSlot:"Configurer le slot"},githubBackup:{title:"Sauvegarde GitHub",history:"Historique",downloadBackup:"Télécharger",restoreBackup:"Restaurer",noBackupsYet:"Aucune sauvegarde"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Chercher tags...",renameTag:"Renommer tag",deleteTag:"Supprimer tag"},notificationTemplates:{placeholders:{title:"Titre notification...",body:"Message notification..."}},batchTag:{placeholders:{newTag:"Nouveau tag..."}},photoGallery:{deletePhoto:"Supprimer photo"},filamentHoverCard:{copySpoolUuid:"Copier UUID bobine"},kProfilesView:{hasNote:"A une note",copyProfile:"Copier profil"},layout:{openMenu:"Ouvrir menu",noPermissionSystemInfo:"Pas d'autorisation système"},dashboard:{dragToReorder:"Glisser pour réorganiser",hideWidget:"Masquer widget"},notificationProviderCard:{deleteNotificationProvider:"Supprimer fournisseur"},fileManagerModal:{closeFileManager:"Fermer gestionnaire",sortFiles:"Trier fichiers",goToParentFolder:"Dossier parent",threeView:"Vue 3D"},embeddedCameraViewer:{refreshStream:"Actualiser flux",close:"Fermer",zoomOut:"Zoom -",resetZoom:"Reset zoom",zoomIn:"Zoom +",dragToResize:"Glisser pour dimension"},timelapseViewer:{skipBack5s:"-5s",skipForward5s:"+5s"},notificationProviders:{descriptions:{email:"Notifications par email SMTP",telegram:"Via bot Telegram",discord:"Via webhook Discord",ntfy:"Push auto-hébergé (ntfy)",pushover:"Push fiable (Pushover)",callmebot:"WhatsApp gratuit via CallMeBot",webhook:"Requête HTTP POST personnalisée"}},logViewer:{searchPlaceholder:"Message ou nom...",noLogEntries:"Aucune entrée journal"},switchbarPopover:{noSwitchesInSwitchbar:"Aucun interrupteur"},projectPageModal:{placeholders:{title:"Titre",designer:"Designer",license:"Licence",description:"Description...",profileTitle:"Titre du profil",profileDescription:"Description du profil..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"En attente",justNow:"À l'instant",now:"Maintenant",minsAgo:"il y a {{count}}m",inMins:"dans {{count}}m",hoursAgo:"il y a {{count}}h",inHours:"dans {{count}}h",daysAgo:"il y a {{count}}j",inDays:"dans {{count}}j"},spoolbuddy:{nav:{dashboard:"Tableau de bord",ams:"AMS",inventory:"Inventaire",writeTag:"Écrire",settings:"Paramètres"},status:{nfcReady:"NFC prêt",nfcOff:"NFC désactivé",offline:"Hors ligne",online:"En ligne",noPrinters:"Aucune imprimante",deviceOffline:"Appareil hors ligne",waitingConnection:"En attente de connexion...",systemReady:"Système prêt",status:"Statut"},dashboard:{readyToScan:"Prêt à scanner",idleMessage:"Placez une bobine sur la balance pour l'identifier",nfcHint:"Le tag NFC sera lu automatiquement",device:"Appareil",syncWeight:"Sync. poids",weightSynced:"Synchronisé !",unknownTag:"Tag inconnu",newTag:"Nouveau tag détecté",onScale:"sur la balance",linkSpool:"Lier à une bobine",linkTagTitle:"Lier le tag à une bobine",linkTag:"Lier le tag",selectSpool:"Sélectionnez une bobine à lier à ce tag :",noUntagged:"Aucune bobine sans tag trouvée",tagDetected:"Tag détecté",noTag:"Pas de tag",tagId:"Tag",grossWeight:"Poids brut",spoolSize:"Taille bobine",close:"Fermer",currentSpool:"Bobine actuelle",plateReady:"Plateau prêt : {{name}}",plateReadyLabel:"Plateaux à libérer",plateClearAction:"Libérer",plateClearedToast:"Plateau marqué comme libéré",plateClearFailed:"Impossible de marquer le plateau comme libéré"},modal:{spoolDetected:"Bobine détectée",assignToAms:"Assigner à l'AMS",syncWeight:"Synchroniser le poids",weightSynced:"Synchronisé !",syncing:"Synchronisation...",newTagDetected:"Nouveau tag détecté",addToInventory:"Ajouter à l'inventaire",assignToAmsTitle:"Assigner à l'AMS",selectSlot:"Sélectionner un emplacement",assign:"Assigner",assigning:"Attribution...",assignSuccess:"Assigné !",assignError:"Échec de l'attribution de la bobine. Veuillez réessayer.",noPrinterSelected:"Sélectionner une imprimante...",noAmsDetected:"Aucun AMS détecté sur cette imprimante",slot:"Emplacement"},weight:{noReading:"Pas de lecture",stable:"Stable",measuring:"Mesure...",tare:"Tarer",calibrate:"Calibrer"},spool:{remaining:"Restant",material:"Matériau",brand:"Marque",color:"Couleur",coreWeight:"Noyau",labelWeight:"Étiquette",scaleWeight:"Balance",netWeight:"Net",lastUsed:"Dernière utilisation"},ams:{noData:"Aucun AMS détecté",connectAms:"Connectez un AMS pour voir les slots",noPrinter:"Aucune imprimante sélectionnée",selectPrinter:"Sélectionnez une imprimante dans la barre supérieure",printerDisconnected:"Imprimante déconnectée",humidity:"Humidité",level:"Niveau",active:"Actif",slot:"Slot",empty:"Vide"},inventory:{search:"Rechercher des bobines...",empty:"Aucune bobine dans l'inventaire",noResults:"Aucune bobine correspondante",spools:"bobines",addSpool:"Ajouter une bobine"},settings:{tabDevice:"Appareil",tabDisplay:"Affichage",tabScale:"Balance",tabUpdates:"Mises à jour",nfcReader:"Lecteur NFC",type:"Type",connection:"Connexion",notConnected:"N/A",deviceInfo:"Info appareil",hostname:"Hôte",uptime:"Temps de fonctionnement",brightness:"Luminosité",saved:"Enregistré",noBacklight:"Aucun rétroéclairage DSI détecté. Le contrôle de luminosité nécessite un écran DSI.",screenBlank:"Délai d'extinction",screenBlankDesc:"L'écran s'éteint après inactivité. Touchez pour réveiller.",displayNote:"La luminosité est appliquée comme filtre logiciel.",scaleCalibration:"Calibration de la balance",currentWeight:"Poids actuel",tareOffset:"Tare",calFactor:"Facteur",knownWeight:"Poids connu",calStep1:"Retirez tout de la balance et appuyez sur Mettre à zéro.",calStep2:"Placez le poids connu sur la balance.",setZero:"Mettre à zéro",calibrateNow:"Calibrer",calibrated:"Calibré",tareSet:"Commande de tare envoyée. En attente de l'appareil...",tareFailed:"Échec de l'envoi de la commande de tare",zeroSet:"Point zéro défini. Placez le poids connu sur la balance.",calibrationDone:"Calibration terminée !",calibrationFailed:"Échec de la calibration",lastCalibrated:"Dernière calibration",stable:"Stable",settling:"Stabilisation...",firmware:"Firmware",scale:"Balance",noDevice:"Aucun appareil SpoolBuddy trouvé",daemonVersion:"Version du daemon",currentVersion:"Actuelle",versionPending:"En attente du daemon...",checking:"Vérification...",checkUpdates:"Vérifier les mises à jour",updateAvailable:"Mise à jour disponible",updateInstructions:"Mise à jour via SSH : exécutez le script d'installation SpoolBuddy.",upToDate:"À jour",includeBeta:"Inclure les versions bêta",systemConfig:"Backend & authentification",backendUrl:"URL du backend Bambuddy",apiToken:"Jeton d'API",apiTokenPlaceholder:"Saisir un jeton d'API",saveConfig:"Enregistrer la configuration",systemQueued:"Configuration mise en file.",systemFieldsRequired:"L'URL du backend est obligatoire.",nfcDiagnostic:"Diagnostic NFC",scaleDiagnostic:"Diagnostic balance",readTagDiagnostic:"Diagnostic lecture de tag",testNfc:"Tester le lecteur",testScale:"Tester la précision",testReadTag:"Lire un tag"},writeTag:{tabExisting:"Bobine existante",tabNew:"Nouvelle bobine",tabReplace:"Remplacer le tag",searchPlaceholder:"Rechercher par matériau, couleur, marque...",noUntaggedSpools:"Aucune bobine sans tag",noTaggedSpools:"Aucune bobine avec tag",selectSpool:"Sélectionnez une bobine, puis placez un NTAG sur le lecteur",placeTag:"Placez un NTAG sur le lecteur",tagReady:"Tag détecté — prêt à écrire",writeTag:"Écrire le tag",replaceTag:"Remplacer le tag",writing:"Écriture du tag...",waiting:"En attente de SpoolBuddy...",writeSuccess:"Tag écrit avec succès !",writeFailed:"Échec de l'écriture",queueFailed:"Impossible de mettre en file la commande d'écriture",tryAgain:"Réessayer",cancel:"Annuler",replaceWarning:"L'ancien tag sera dissocié. Le nouveau tag le remplacera.",deviceOffline:"SpoolBuddy est hors ligne",material:"Matériau",colorName:"Nom de la couleur",color:"Couleur",brand:"Marque",weight:"Poids (g)",createSpool:"Créer la bobine",creating:"Création...",spoolCreated:"Bobine créée ! Prêt à écrire.",createFailed:"Impossible de créer la bobine"},quickMenu:{printerPower:"Alimentation imprimante",systemControls:"Système",restartDaemon:"Redémarrer le daemon",restartBrowser:"Redémarrer le navigateur",reboot:"Redémarrer",shutdown:"Éteindre",swipeToClose:"Glisser vers le bas pour fermer",confirmTitle:"Confirmer",confirmShutdown:"Êtes-vous sûr de vouloir éteindre le SpoolBuddy ? Vous aurez besoin d'un accès physique pour le rallumer.",confirmReboot:"Êtes-vous sûr de vouloir redémarrer le SpoolBuddy ?",confirmRestartDaemon:"Redémarrer le daemon SpoolBuddy ? Le NFC et la balance seront temporairement indisponibles.",confirmRestartBrowser:"Redémarrer le navigateur kiosque ? L'écran sera brièvement noir.",confirm:"Confirmer",confirmPlugOn:"Allumer {{name}} ?",confirmPlugOff:"Éteindre {{name}} ?",turnOn:"Allumer",turnOff:"Éteindre"}},bugReport:{title:"Signaler un bug",description:"Description",descriptionPlaceholder:"Qu'est-ce qui n'a pas fonctionné ? Veuillez décrire le problème...",email:"E-mail (optionnel)",emailPlaceholder:"votre@email.fr",emailPrivacy:"Si fourni, votre e-mail sera inclus dans une section repliée de l'issue GitHub pour que le mainteneur puisse vous contacter.",screenshot:"Capture d'écran",uploadOrPaste:"Télécharger, coller ou glisser une image",dataCollectedSummary:"Quelles données sont incluses dans le rapport ?",dataIncluded:"Inclus :",dataIncludedList:"Version de l'app, OS, architecture, version Python, statistiques de base de données (compteurs uniquement), modèles d'imprimantes, nombre de buses, versions firmware, état de connexion, état des intégrations (Spoolman, MQTT, HA), paramètres non sensibles, nombre d'interfaces réseau, détails Docker, versions des dépendances.",dataNeverIncluded:"Jamais inclus :",dataNeverIncludedList:"Noms d'imprimantes, numéros de série, codes d'accès, mots de passe, adresses IP, adresses e-mail, clés API, tokens, URLs de webhook, noms d'hôtes ou noms d'utilisateurs.",submit:"Envoyer",startLogging:"Lancer la journalisation",stepEnableLogging:"Journalisation activée",stepReproduce:"Reproduisez le problème",stepStopLogging:"Arrêter & envoyer",stopAndSubmit:"Arrêter & Envoyer",maxDuration:"Arrêt auto après {{minutes}} min",stoppingLogs:"Collecte des journaux & envoi...",submitting:"Envoi du rapport de bug...",submitSuccess:"Rapport de bug envoyé avec succès !",submitFailed:"Échec de l'envoi du rapport de bug",thankYou:"Merci !",submitted:"Votre rapport de bug a été soumis.",viewIssue:"Voir l'issue",unexpectedError:"Une erreur inattendue est survenue"},failureDetection:{title:"Détection d'échec par IA",description:"Surveille les impressions via une API ML Obico auto-hébergée et agit automatiquement sur les échecs détectés.",mlUrl:"URL de l'API ML Obico",mlUrlHint:"URL de base de votre conteneur Obico ml_api auto-hébergé (ex. http://192.168.1.10:3333).",test:"Tester",testSuccess:"API ML accessible et fonctionnelle.",testFailed:"Impossible d'atteindre l'API ML.",sensitivity:"Sensibilité",sensitivityLow:"Basse (moins de faux positifs)",sensitivityMedium:"Moyenne (équilibrée)",sensitivityHigh:"Haute (détection précoce, plus de faux positifs)",sensitivityHint:"Ajuste les seuils de confiance qui déclenchent les avertissements et les échecs.",action:"Action sur échec détecté",actionNotify:"Notifier uniquement",actionPause:"Mettre en pause",actionPauseOff:"Pause et couper l'alimentation",pollInterval:"Intervalle de vérification (secondes)",pollIntervalHint:"Fréquence de vérification de chaque imprimante pendant l'impression. Minimum 5s, maximum 120s.",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"Imprimantes surveillées",perPrinterHint:"Choisissez quelles imprimantes le service de détection surveille.",monitorAll:"Surveiller toutes les imprimantes connectées",statusTitle:"Statut",serviceRunning:"Service en cours d'exécution",thresholds:"Seuils bas / haut",activePrinters:"Impressions actives",noActivePrints:"Aucune impression en cours.",historyTitle:"Détections récentes",noHistory:"Aucune détection pour le moment."},makerworld:{title:"MakerWorld",description:"Collez une URL de modèle MakerWorld pour l'importer et l'imprimer directement depuis Bambuddy — sans passer par l'application Bambu Handy.",pasteUrlHeader:"Importer depuis MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… ou collez n'importe quel lien MakerWorld",resolveButton:"Résoudre",signInRequiredTitle:"Connexion Bambu Cloud requise pour télécharger",signInRequiredBody:"Vous pouvez consulter les détails du modèle anonymement, mais MakerWorld nécessite un compte Bambu Cloud pour télécharger les fichiers 3MF.",openCloudSettings:"Ouvrir les paramètres Cloud",untitledModel:"Modèle sans titre",byCreator:"par {{name}}",downloadsCount:"{{count}} téléchargements",licensePrefix:"Licence",alreadyImported:"Déjà dans la bibliothèque",openOnMakerworld:"Ouvrir sur MakerWorld",alreadyInLibrary:"Ce modèle est déjà dans votre bibliothèque — retrouvez-le dans Gestionnaire de fichiers → MakerWorld",importSuccess:"{{filename}} importé — enregistré dans Gestionnaire de fichiers → MakerWorld",platesHeader:"Plateaux ({{count}})",plateDefaultName:"Plateau {{n}}",materialCount:"{{count}} filaments",amsRequired:"AMS requis",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"Enregistrer",sliceIn:"Enregistrer et découper dans {{slicer}}",disclaimer:"L'intégration MakerWorld utilise des points de terminaison API documentés par la communauté. Bambuddy n'est ni affilié ni approuvé par MakerWorld ou Bambu Lab.",lastImportSuccess:"Importé dans votre bibliothèque",lastImportAlreadyInLibrary:"Déjà dans votre bibliothèque",viewInLibrary:"Voir dans le Gestionnaire de fichiers",openInBambuStudio:"Ouvrir dans Bambu Studio",openInOrcaSlicer:"Ouvrir dans OrcaSlicer",importTo:"Importer dans le Gestionnaire de fichiers",recentImportsHeader:"Imports récents",phaseResolving:"Résolution",phaseDownloading:"Téléchargement",folderAuto:"MakerWorld (par défaut)",importAll:"Tout importer",importAllProgress:"Importation de {{current}}/{{total}}",openGallery:"Ouvrir la galerie d'images",galleryPrev:"Image précédente",galleryNext:"Image suivante",deleteImport:"Retirer de la bibliothèque",importDeleting:"Suppression…",importDeleted:"Retiré de la bibliothèque",confirmDelete:"Retirer {{filename}} de la bibliothèque ? Le fichier local est supprimé, mais la plaque peut être ré-importée depuis MakerWorld.",errors:{resolveFailed:"Impossible de résoudre cette URL MakerWorld.",downloadFailed:"Le téléchargement a échoué. Veuillez réessayer.",deleteFailed:"Impossible de retirer le fichier de la bibliothèque."}},libraryTrash:{title:"Corbeille",headerButton:"Corbeille",headerTooltip:"Voir les fichiers déplacés dans la corbeille",backToFiles:"Retour au gestionnaire de fichiers",subtitleAdmin:"Les fichiers supprimés restent ici pendant {{days}} jours, puis sont supprimés automatiquement. Cette vue affiche la corbeille de tous les utilisateurs.",subtitleUser:"Les fichiers supprimés restent ici pendant {{days}} jours, puis sont supprimés automatiquement.",loading:"Chargement de la corbeille…",loadError:"Impossible de charger la corbeille.",empty:"La corbeille est vide.",summary:"{{count}} fichiers · {{size}}",emptyTrash:"Vider la corbeille",restore:"Restaurer",purgeNow:"Supprimer maintenant",autoPurgeIn:"Suppression automatique dans {{when}}",days:"jours",retentionLabel:"Supprimer automatiquement après",selectAll:"Tout sélectionner",selectOne:"Sélectionner {{filename}}",selectionCount:"{{count}} sélectionné(s)",bulkRestore:"Restaurer la sélection",bulkPurge:"Supprimer la sélection",col:{filename:"Fichier",folder:"Dossier",size:"Taille",deleted:"Mis à la corbeille",autoPurge:"Suppression auto.",owner:"Propriétaire",actions:"Actions"},confirm:{purgeTitle:"Supprimer définitivement ?",purgeBody:"{{filename}} sera supprimé du disque et ne pourra pas être restauré.",emptyTitle:"Vider la corbeille ?",emptyBody:"Tous les {{count}} fichiers seront supprimés du disque. Cette action est irréversible.",bulkPurgeTitle:"Supprimer définitivement les fichiers sélectionnés ?",bulkPurgeBody:"Les {{count}} fichiers sélectionnés seront supprimés du disque et ne pourront pas être restaurés.",cta:"Supprimer définitivement"},toast:{restored:"Fichier restauré.",restoreFailed:"Impossible de restaurer le fichier.",purged:"Fichier supprimé définitivement.",purgeFailed:"Impossible de supprimer le fichier.",emptied:"{{count}} fichier(s) supprimé(s) de la corbeille.",emptyFailed:"Impossible de vider la corbeille.",retentionSaved:"Suppression automatique réglée sur {{days}} jours.",retentionFailed:"Impossible d'enregistrer le réglage de rétention.",bulkRestored:"{{count}} fichier(s) restauré(s).",bulkPurged:"{{count}} fichier(s) supprimé(s)."}},libraryPurge:{title:"Purger les anciens fichiers",headerButton:"Purger",headerTooltip:"Déplacer en masse les anciens fichiers vers la corbeille",description:"Les fichiers plus anciens que le seuil seront déplacés vers la corbeille. Les dossiers externes sont ignorés. Vous pouvez restaurer depuis la corbeille avant la suppression automatique.",ageLabel:"Déplacer les fichiers plus anciens que",days:"jours",includeNeverPrinted:"Inclure les fichiers jamais imprimés",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"Vérification du nombre de fichiers concernés…",previewFailed:"Impossible de prévisualiser la purge.",previewSummary:"{{count}} fichiers · {{size}} seraient déplacés vers la corbeille",andMore:"…et {{count}} de plus",warning:"Les fichiers sont supprimés en douceur — vous pouvez les restaurer depuis la corbeille jusqu'à l'expiration de la période de rétention.",confirmCta:"Déplacer {{count}} vers la corbeille",purging:"Déplacement vers la corbeille…",toast:{success:"{{count}} fichier(s) déplacé(s) vers la corbeille.",failed:"Impossible de purger les fichiers."}},libraryAutoPurge:{enableLabel:"Purge automatique des anciens fichiers",enableDescription:"Exécute la purge administrateur une fois par jour. Les fichiers sont d'abord déplacés vers la corbeille — ils ne sont pas supprimés immédiatement.",ageLabel:"Purger automatiquement les fichiers plus anciens que",ageDescription:"Minimum 7 jours, maximum 10 ans. Utilise la même règle d'ancienneté que le bouton Purger manuel.",days:"jours",includeNeverPrinted:"Inclure les fichiers jamais imprimés",saveFailed:"Impossible d'enregistrer les paramètres de purge automatique."},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},Sme={nav:{printers:"プリンター",archives:"アーカイブ",queue:"キュー",stats:"統計",profiles:"プロファイル",maintenance:"メンテナンス",projects:"プロジェクト",inventory:"フィラメント",files:"ファイル管理",makerworld:"MakerWorld",notifications:"通知",settings:"設定",system:"システム",collapseSidebar:"サイドバーを閉じる",expandSidebar:"サイドバーを開く",update:"アップデート",updateAvailable:"アップデートあり: v{{version}}",updateAvailableBanner:"バージョン {{version}} が利用可能です！",viewUpdate:"アップデートを表示",viewOnGithub:"GitHubで表示",keyboardShortcuts:"キーボードショートカット (?)",switchToLight:"ライトモードに切替",switchToDark:"ダークモードに切替",smartSwitches:"スマートスイッチ",logout:"ログアウト"},common:{save:"保存",saving:"保存中...",cancel:"キャンセル",delete:"削除",edit:"編集",add:"追加",close:"閉じる",confirm:"確認",loading:"読み込み中...",error:"エラー",success:"成功",warning:"警告",enabled:"有効",disabled:"無効",yes:"はい",no:"いいえ",on:"オン",off:"オフ",all:"すべて",none:"なし",search:"検索",filter:"フィルター",sort:"並べ替え",refresh:"更新",download:"ダウンロード",upload:"アップロード",uploading:"アップロード中...",uploadFailed:"アップロード失敗",actions:"操作",status:"ステータス",name:"名前",description:"説明",date:"日付",time:"時間",hours:"時間",minutes:"分",seconds:"秒",days:"日",enable:"有効化",disable:"無効にする",permissions:"権限",noPrinters:"プリンターが登録されていません",noData:"データがありません",linkNotFound:"リンクが見つかりません",required:"必須",optional:"オプション",dismiss:"閉じる",apply:"適用",reset:"リセット",export:"エクスポート",import:"インポート",clear:"クリア",selectAll:"すべて選択",deselectAll:"すべて選択解除",noChange:"— 変更なし —",unchanged:"変更なし",unassigned:"未割当",unknown:"不明",unknownError:"不明なエラー",today:"今日",tomorrow:"明日",asap:"即時",overdue:"期限超過",now:"今すぐ",collapse:"折りたたむ",expand:"展開",viewArchive:"アーカイブを表示",viewInFileManager:"ファイルマネージャーで表示",addedBy:"{{username}}が追加",prints:"プリント",more:"+{{count}}件",ascending:"昇順",descending:"降順",back:"戻る",copy:"コピー",copied:"コピーしました!",printer:"プリンター",remove:"削除",type:"種類",print:"印刷",rename:"名前変更",move:"移動",create:"作成",duplicate:"複製",left:"左",right:"右"},printers:{title:"プリンター",addPrinter:"プリンターを追加",editPrinter:"プリンターを編集",deletePrinter:"プリンターを削除",printerName:"プリンター名",serialNumber:"シリアル番号",ipAddress:"IPアドレス / ホスト名",accessCode:"アクセスコード",model:"モデル",nozzleCount:"ノズル数",autoArchive:"自動アーカイブ",status:{available:"利用可能",idle:"待機中",printing:"印刷中",paused:"一時停止",offline:"オフライン",problem:"問題",error:"エラー",finished:"完了",unknown:"不明"},temperatures:{nozzle:"ノズル",bed:"ベッド",chamber:"チャンバー"},progress:"{{percent}}% 完了",timeRemaining:"残り {{time}}",deleteConfirm:"「{{name}}」を削除しますか？",maintenanceOk:"メンテナンス正常",maintenanceWarning:"{{count}}件の警告",maintenanceWarning_plural:"{{count}}件の警告",maintenanceDue:"{{count}}件のメンテナンス期限",maintenanceDue_plural:"{{count}}件の期限",sort:{name:"名前",status:"ステータス",model:"モデル",location:"ロケーション",ascending:"昇順で並べ替え",descending:"降順で並べ替え"},cardSize:{small:"小",medium:"中",large:"大",extraLarge:"特大"},hideOffline:"オフラインを非表示",nextAvailable:"次に完了",powerOn:"電源オン",offlinePrintersWithPlugs:"スマートプラグ付きオフラインプリンター",noPrintersConfigured:"プリンターが設定されていません",search:"プリンターを検索...",noSearchResults:"検索またはフィルターに一致するプリンターがありません",filter:{allStatuses:"すべてのステータス",allLocations:"すべての場所"},readyToPrint:"印刷可能",external:"外部",extL:"Ext-L",extR:"Ext-R",deleteArchives:"印刷アーカイブを削除",noLabel:"ラベルなし",printPreview:"印刷プレビュー",width:"幅",height:"高さ",noObjectsFound:"オブジェクトが見つかりません",objectsLoadedOnPrintStart:"オブジェクトは印刷開始時に読み込まれます",willBeSkipped:"スキップされます",name:"名前",serialCannotBeChanged:"シリアル番号は変更できません",locationHelp:"プリンターのグループ化とキュージョブのフィルタリングに使用",wifiSignal:{veryWeak:"非常に弱い",weak:"弱い",fair:"注意",good:"良好",excellent:"非常に良い"},maintenanceUpToDate:"すべてのメンテナンスが最新です",chamberLightOn:"チャンバーライトをオンにしました",chamberLightOff:"チャンバーライトをオフにしました",files:"ファイル",browseFiles:"プリンターのファイルを参照",autoOffAfterPrint:"印刷後に自動電源オフ",autoOffExecuted:"自動オフが実行されました - リセットするにはプリンターの電源を入れてください",hmsErrors:"クリックしてHMSエラーを表示",viewHmsErrors:"{{count}}件のHMSエラーを表示",resume:"再開",pause:"一時停止",stop:"停止",camera:"カメラ",skipObject:"オブジェクトスキップ",reconnect:"再接続",forceRefresh:"強制更新",forceRefreshSuccess:"更新をリクエストしました",mqttDebug:"MQTTデバッグ",printerInformation:"プリンター情報",copyToClipboard:"コピー",copied:"コピーしました！",state:"状態",wifiSignalLabel:"WiFi信号",developerMode:"開発者モード",enabled:"有効",disabled:"無効",addedOn:"追加日",sdCard:"SDカード",inserted:"挿入済み",notInserted:"未挿入",totalPrintHours:"印刷時間",activeNozzle:"アクティブ: {{nozzle}}ノズル",nozzleRack:"ノズルラック",nozzleDocked:"ドッキング中",nozzleMounted:"マウント中",nozzleActive:"アクティブ",nozzleIdle:"アイドル",nozzleDiameter:"直径",nozzleType:"タイプ",nozzleStatus:"ステータス",nozzleFilament:"フィラメント",nozzleWear:"摩耗",nozzleMaxTemp:"最高温度",nozzleSerial:"シリアル",nozzleHardenedSteel:"焼入れ鋼",nozzleStainlessSteel:"ステンレス鋼",nozzleTungstenCarbide:"タングステンカーバイド",nozzleFlow:"フロー",nozzleHighFlow:"ハイフロー",nozzleStandardFlow:"スタンダード",firmwareUpdate:"ファームウェアアップデート",firmwareInstructions:"プリンターのタッチスクリーンで",firmwareNav:"に移動",settings:"設定",firmware:"ファームウェア",discoverPrinters:"プリンターを検出",searching:"検索中...",manualEntry:"手動入力",addFromCloud:"クラウドから追加",toast:{printerDeleted:"プリンターを削除しました",missingSpoolAssignment:"{{printer}}で印刷を開始しました。以下のスプール割り当てがありません: {{slots}}",printerAdded:"プリンターを追加しました",printerUpdated:"プリンターを更新しました",failedToDelete:"プリンターの削除に失敗しました",failedToAdd:"プリンターの追加に失敗しました",failedToUpdate:"プリンターの更新に失敗しました",commandSent:"コマンドを送信しました",failedToSendCommand:"コマンドの送信に失敗しました",turnedOn:"{{name}} の電源をオンにしました",failedToPowerOn:"{{name}} の電源オンに失敗しました",scriptTriggered:"スクリプトを実行しました",printStopped:"印刷を停止しました",printPaused:"印刷を一時停止しました",printResumed:"印刷を再開しました",referenceDeleted:"リファレンスを削除しました",detectionAreaSaved:"検出エリアを保存しました",failedToRunScript:"スクリプトの実行に失敗しました",failedToStopPrint:"印刷の停止に失敗しました",failedToPausePrint:"印刷の一時停止に失敗しました",failedToResumePrint:"印刷の再開に失敗しました",failedToControlChamberLight:"チャンバーライトの制御に失敗しました",failedToSetSpeed:"印刷速度の設定に失敗しました",failedToUpdateSetting:"設定の更新に失敗しました",failedToSkipObjects:"オブジェクトのスキップに失敗しました",failedToRereadRfid:"RFIDの再読み取りに失敗しました",failedToCheckPlate:"プレートの確認に失敗しました",failedToUpdateLabel:"ラベルの更新に失敗しました",failedToDeleteReference:"リファレンスの削除に失敗しました",failedToSaveDetectionArea:"検出エリアの保存に失敗しました",plateCheckEnabled:"プレートチェックを有効にしました",plateCheckDisabled:"プレートチェックを無効にしました",calibrationSaved:"キャリブレーションを保存しました！",calibrationFailed:"キャリブレーションに失敗しました",rfidRereadInitiated:"RFID再読み取りを開始しました"},connection:{connected:"接続中",offline:"オフライン"},plateStatus:{markCleared:"プレートをクリア済みにする",cleared:"プレートクリア済み",notCleared:"プレート未クリア",inUse:"プレート使用中"},queue:{inQueue:"キュー内 {{count}} 件",inQueue_plural:"{{count}}件がキュー内"},controls:"コントロール",rfid:{reread:"RFID再読み取り"},bedJog:{title:"ビルドプレートを移動",bed:"ベッド",step:"ステップ (mm)",up:"プレートを上へ",down:"プレートを下へ",disabledWhilePrinting:"印刷中は無効",notHomedTitle:"プリンターがホーミングされていません",notHomedMessage:"前回の印刷以降、プリンターがホーミングされていません。安全な位置決めのためにまずオートホーミングを実行するか（ツールヘッドをパークしてからX・Y・Zをホーミングします）、このまま移動してください — ソフトエンドストップはバイパスされます。",homeZ:"オートホーミング",moveAnyway:"このまま移動",homingStarted:"プリンターをオートホーミング中…"},permission:{noAdd:"プリンターを追加する権限がありません",noEdit:"プリンターを編集する権限がありません",noDelete:"プリンターを削除する権限がありません",noControl:"プリンターを制御する権限がありません",noFiles:"このディレクトリにファイルがありません",noAmsRfid:"AMS RFIDを再読み取りする権限がありません",noSmartPlugControl:"スマートプラグを制御する権限がありません",noCamera:"カメラを表示する権限がありません"},modal:{addTitle:"プリンターを追加",editTitle:"プリンターを編集",myPrinter:"マイプリンター",selectModel:"モデルを選択...",locationGroup:"ロケーション / グループ",locationPlaceholder:"例: 工房、オフィス、地下室",autoArchiveLabel:"完了した印刷を自動アーカイブ",fromPrinterSettings:"プリンターの設定から取得",modelOptional:"モデル（任意）",saveChanges:"変更を保存"},skipObjects:{tooltip:"オブジェクトスキップ",onlyWhilePrinting:"オブジェクトスキップ（印刷中のみ）",requiresMultiple:"オブジェクトスキップ（2個以上必要）",title:"オブジェクトスキップ",matchIdsInfo:"プリンター画面のIDと照合してください",printerShowsIds:"プリンター画面にビルドプレート上のオブジェクトIDが表示されます",skipSelected:"選択をスキップ",skipping:"スキップ中...",noObjectsSelected:"オブジェクトが選択されていません",selectObjectsToSkip:"現在の印刷からスキップするオブジェクトを選択してください",skipped:"スキップ済み",objectsSkipped:"オブジェクトをスキップしました",activeCount:"{{count}}個アクティブ",waitForLayer:"オブジェクトをスキップするにはレイヤー2以降をお待ちください（現在レイヤー{{layer}}）",skip:"スキップ",confirmTitle:"オブジェクトをスキップしますか？",confirmMessage:"「{{name}}」をスキップしますか？この操作は元に戻せません。"},confirm:{deleteTitle:"プリンターを削除",deleteMessage:"「{{name}}」を削除しますか？すべての接続設定が削除されます。",deleteArchivesNote:"このプリンターのすべての印刷履歴が完全に削除されます。",keepArchivesNote:"印刷履歴は保持されますが、このプリンターとの関連は解除されます。",stopTitle:"印刷を停止",stopMessage:"「{{name}}」の現在の印刷を停止しますか？印刷ジョブがキャンセルされます。",stopButton:"印刷を停止",pauseTitle:"印刷を一時停止",pauseMessage:"「{{name}}」の現在の印刷を一時停止しますか？",pauseButton:"印刷を一時停止",resumeTitle:"印刷を再開",resumeMessage:"「{{name}}」の印刷を再開しますか？",resumeButton:"印刷を再開",powerOnTitle:"プリンターの電源をオン",powerOnMessage:"「{{name}}」の電源をオンにしますか？",powerOnButton:"電源オン",powerOffTitle:"プリンターの電源をオフ",powerOffMessage:"「{{name}}」の電源をオフにしますか？",powerOffWarning:"警告: 「{{name}}」は現在印刷中です！電源をオフにしますか？印刷が中断され、プリンターが損傷する可能性があります。",powerOffButton:"電源オフ"},bulk:{select:"選択",selectAll:"すべて選択",selectByLocation:"場所で選択",selected:"{{count}}件選択中",actions:{stop:"停止",pause:"一時停止",resume:"再開",clearPlate:"ベッドをクリア",clearHMS:"通知をクリア"},confirm:{stopTitle:"{{count}}件の印刷を停止",stopMessage:"{{count}}台のプリンターのアクティブな印刷をキャンセルします。この操作は元に戻せません。",stopButton:"すべて停止",pauseTitle:"{{count}}件の印刷を一時停止",pauseMessage:"{{count}}台のプリンターのアクティブな印刷を一時停止します。",pauseButton:"すべて一時停止",clearPlateTitle:"{{count}}台のプリントベッドをクリア",clearPlateMessage:"{{count}}台のプリンターのプリントベッドをクリアし、キュー内のジョブが開始される場合があります。",clearPlateButton:"すべてクリア"},success:"{{count}}台のプリンターで{{action}}が完了",partial:"{{succeeded}}件成功、{{failed}}件失敗",noneApplicable:"選択したプリンターにこのアクションに適した状態のものがありません",selectByState:"ステータスで選択"},discovery:{title:"プリンター",searching:"検索中...",scanning:"スキャン中...",scanProgress:"スキャン中... {{scanned}}/{{total}}",foundPrinters:"{{count}}台のプリンターを検出",noPrintersFound:"プリンターが見つかりません",noPrintersFoundSubnet:"指定されたサブネットにプリンターが見つかりません。",noPrintersFoundNetwork:"ネットワーク上にプリンターが見つかりません。",allConfigured:"検出されたすべてのプリンターは既に設定済みです。",alreadyAdded:"追加済み",select:"選択",manualEntry:"手動入力",addFromCloud:"クラウドから追加",subnetToScan:"スキャンするサブネット",dockerNote:"Dockerを検出しました。プリンターのサブネットをCIDR表記で入力してください。docker-compose.ymlでnetwork_mode: hostが必要です。",scanSubnet:"サブネットをスキャンしてプリンターを検出",discoverNetwork:"ネットワーク上のプリンターを検出",scanningSubnet:"サブネットでBambuプリンターをスキャン中...",scanningNetwork:"ネットワークをスキャン中...",serialRequired:"シリアル番号が必要です",unknown:"不明",failedToStart:"印刷の開始に失敗しました"},drying:{start:"乾燥開始",stop:"乾燥停止",temperature:"温度",duration:"時間",hours:"時間",timeRemaining:"残り {{time}}",active:"乾燥中",notSupported:"乾燥非対応",powerRequired:"AMS電源アダプターを接続して乾燥を有効にしてください",startingDrying:"乾燥を開始しています...",stoppingDrying:"乾燥を停止しています...",rotateTray:"乾燥中にスプールを回転"},filaments:"フィラメント",openCameraOverlay:"カメラオーバーレイを開く",openCameraWindow:"カメラを新しいウィンドウで開く",firmwareUpdateAvailable:"ファームウェアアップデートあり: {{current}} → {{latest}}",firmwareUpToDate:"ファームウェア {{version}} — 最新",firmwareUpdateButton:"アップデート",plateDetection:{noPermission:"このページにアクセスする権限がありません。",enabledClick:"プレートチェック有効 - クリックして無効化",disabledClick:"プレートチェック無効 - クリックして有効化",manageCalibration:"プレート検出キャリブレーションを管理",calibrationRequired:"キャリブレーションが必要です",calibrationInstructions:"ビルドプレートが<strong>完全に空</strong>であることを確認してから、キャリブレーションをクリックしてください。",calibrationDescription:"キャリブレーションは空のプレートのリファレンス画像を撮影します。以降のチェックではこのリファレンスと比較してオブジェクトを検出します。",calibrationTip:"<strong>ヒント:</strong> 異なるプレート用に最大5つのキャリブレーションを保存できます。チェック時に最適なものが自動的に使用されます。",plateEmpty:"プレートは空のようです",objectsDetected:"オブジェクトを検出しました",confidence:"信頼度",difference:"差分",analysisPreview:"分析プレビュー:",analysisLegend:"緑の枠 = 検出エリア、赤のオーバーレイ = キャリブレーションとの差分",savedReferences:"保存済みリファレンス ({{count}}/{{max}})",deleteReference:"リファレンスを削除",labelPlaceholder:"ラベル...",clickToEdit:"{{label}} - クリックして編集",clickToAddLabel:"クリックしてラベルを追加"},speed:{title:"印刷速度",silent:"サイレント (50%)",standard:"スタンダード (100%)",sport:"スポーツ (124%)",ludicrous:"ルディクラス (166%)"},airduct:{title:"エアダクトモード",cooling:"冷却",heating:"加熱"},noSdCard:"SDなし",door:{open:"開",closed:"閉"},fans:{partCooling:"パーツ冷却ファン",auxiliary:"補助ファン",chamber:"チャンバーファン"},clickToViewHmsErrors:"クリックしてHMSエラーを表示",estimatedCompletion:"完了予定時刻",plateNumber:"プレート {{number}}",slotOptions:"スロットオプション",amsPopup:{friendlyName:"AMS名",friendlyNamePlaceholder:"例: AMS フレンドリー名",serialNumber:"シリアル番号",firmwareVersion:"ファームウェア",save:"保存",clear:"クリア",noEditPermission:"AMS ユニットの名前を変更する権限がありません"},firmwareModal:{title:"ファームウェアアップデート",titleUpToDate:"ファームウェア情報",currentVersion:"現在のバージョン",latestVersion:"最新バージョン",releaseNotes:"リリースノート",checkingPrereqs:"前提条件を確認中...",sdCardReady:"SDカード準備完了。下をクリックしてファームウェアをアップロードしてください。",uploadedSuccess:"ファームウェアをSDカードにアップロードしました！",applyInstructions:"プリンターでアップデートを適用するには:",step1:"プリンターのタッチスクリーンで設定に移動",step2:"ファームウェアに移動",step3:"SDカードからアップデートを選択",step4:"アップデートには10〜20分かかります",done:"完了",starting:"開始中...",uploadFirmware:"ファームウェアをアップロード",uploadFailed:"アップロード開始に失敗しました: {{error}}",uploadedToast:"ファームウェアをアップロードしました！プリンター画面からアップデートを実行してください。",availableVersions:"利用可能なバージョン",usable:"利用可",unavailable:"利用不可",installed:"インストール済み",newerBadge:"新しい",olderBadge:"古い",currentBadge:"現在"},accessCodePlaceholder:"プリンター設定から取得",roi:{title:"プリンター",xStart:"X開始",yStart:"Y開始",width:"幅",height:"高さ",instruction:"ビルドプレートに焦点を合わせるように検出エリアを調整してください。プレビューの緑の枠が現在のエリアを示しています。"},developerModeWarning:"開発者LANモードが有効になっていません: {{names}}。一部の機能が動作しない可能性があります。",howToEnable:"有効化方法",incompatibleFile:"このファイルは{{slicedFor}}用にスライスされていますが、このプリンターは{{printerModel}}です",dropNotPrintable:".gcodeおよび.gcode.3mfファイルのみ印刷できます",dropToPrint:"ドロップして印刷",cannotPrint:"プリンター使用中"},archives:{title:"印刷アーカイブ",searchPlaceholder:"アーカイブを検索...",filterByPrinter:"プリンターで絞り込み",filterByStatus:"ステータスで絞り込み",sortBy:"並べ替え",sortNewest:"新しい順",sortOldest:"古い順",sortName:"名前順",sortDuration:"時間順",sortLargest:"大きい順",sortSmallest:"小さい順",sortSize:"サイズ",noArchives:"アーカイブが見つかりません",noArchivesSearch:"検索条件に一致するアーカイブがありません",originalPrintNotVisible:"元の印刷が表示されていません - フィルターをクリアしてみてください",noArchivesYet:"アーカイブはまだありません",prints:"件",pagination:{showing:"表示中",to:"〜",of:"/",show:"表示",page:"ページ",all:"すべて"},loadingArchives:"アーカイブを読み込み中...",releaseToUpload:"ドロップしてアップロード",showAll:"すべて表示",showFavoritesOnly:"お気に入りのみ表示",gridView:"グリッド表示",listView:"リスト表示",calendarView:"カレンダー表示",logView:"印刷ログ",manageTags:"タグを管理",showFailedPrints:"失敗した印刷を表示",hideFailedPrints:"失敗した印刷を非表示",hideDuplicates:"重複を非表示",viewOriginalPrint:"クリックして元の印刷を表示 (#{{id}})",printTime:"印刷時間",filamentUsed:"フィラメント使用量",cost:"コスト",reprint:"再印刷",preview:"プレビュー",deleteArchive:"アーカイブを削除",deleteConfirm:"このアーカイブを削除しますか？",favorite:"お気に入り",unfavorite:"お気に入りから削除",viewDetails:"詳細を表示",status:{completed:"完了",failed:"失敗",stopped:"中止"},toast:{source3mfAttached:"ソース3MFを添付しました: {{filename}}",failedUploadSource3mf:"ソース3MFのアップロードに失敗しました",source3mfRemoved:"ソース3MFを削除しました",failedRemoveSource3mf:"ソース3MFの削除に失敗しました",f3dAttached:"F3Dを添付しました: {{filename}}",failedUploadF3d:"F3Dのアップロードに失敗しました",f3dRemoved:"F3Dを削除しました",failedRemoveF3d:"F3Dの削除に失敗しました",timelapseAttached:"タイムラプスを添付しました: {{filename}}",timelapseAlreadyAttached:"タイムラプスは既に添付されています",noMatchingTimelapse:"一致するタイムラプスが見つかりません",failedScanTimelapse:"タイムラプスのスキャンに失敗しました",failedAttachTimelapse:"タイムラプスの添付に失敗しました",timelapseRemoved:"タイムラプスを削除しました",failedRemoveTimelapse:"タイムラプスの削除に失敗しました",timelapseUploaded:"タイムラプスをアップロードしました: {{filename}}",failedUploadTimelapse:"タイムラプスのアップロードに失敗しました",archiveDeleted:"アーカイブを削除しました",failedDeleteArchive:"アーカイブの削除に失敗しました",addedToFavorites:"お気に入りに追加しました",removedFromFavorites:"お気に入りから削除しました",projectUpdated:"プロジェクトを更新しました",failedUpdateProject:"プロジェクトの更新に失敗しました",linkCopied:"リンクをクリップボードにコピーしました",failedCopyLink:"リンクのコピーに失敗しました",photoDeleted:"写真を削除しました",failedDeletePhoto:"写真の削除に失敗しました",failedDeleteArchives:"アーカイブの削除に失敗しました",failedUpdateFavorites:"お気に入りの更新に失敗しました",exportDownloaded:"エクスポートをダウンロードしました",exportFailed:"エクスポートに失敗しました"},menu:{print:"印刷",schedule:"スケジュール",openInBambuStudio:"スライサーで開く",slice:"スライス",externalLink:"外部リンク",viewOnMakerWorld:"MakerWorldで表示",preview3d:"3Dプレビュー",viewTimelapse:"タイムラプスを表示",scanForTimelapse:"タイムラプスをスキャン",uploadTimelapse:"タイムラプスをアップロード",removeTimelapse:"タイムラプスを削除",downloadSource3mf:"ソース3MFをダウンロード",uploadSource3mf:"ソース3MFをアップロード",replaceSource3mf:"ソース3MFを置換",removeSource3mf:"ソース3MFを削除",uploadF3d:"F3Dをアップロード",replaceF3d:"F3Dを置換",downloadF3d:"Fusion 360デザインファイルをダウンロード",removeF3d:"F3Dを削除",download:"ダウンロード",copyDownloadLink:"ダウンロードリンクをコピー",qrCode:"QRコード",viewPhotos:"写真を表示",viewPhotosCount:"写真を表示 ({{count}})",projectPage:"プロジェクトページ",addToFavorites:"お気に入りに追加",removeFromFavorites:"お気に入りから削除",edit:"編集",goToProject:"プロジェクトへ: {{name}}",addToProject:"プロジェクトに追加",removeFromProject:"プロジェクトから削除",loading:"アーカイブを読み込み中...",noProjectsAvailable:"利用可能なプロジェクトがありません",searchProjects:"Search projects…",select:"選択",deselect:"選択解除",delete:"削除"},permission:{noReprint:"このアーカイブを再印刷する権限がありません",noAddToQueue:"キューに追加する権限がありません",noUpdateArchives:"アーカイブを更新する権限がありません",noUploadFiles:"ファイルをアップロードする権限がありません",noDownload:"アーカイブをダウンロードする権限がありません",noCopyLink:"ダウンロードリンクをコピーする権限がありません",noDelete:"このアーカイブを削除する権限がありません",noCreate:"アーカイブを作成する権限がありません"},platePicker:{title:"プレビューするプレートを選択",hint:"このアーカイブには複数のプレートがあります。GCodeビューアで開くプレートを選択してください。",plateLabel:"プレート {{index}}",objectCount:"{{count}} オブジェクト",objectCount_plural:"{{count}} オブジェクト",noGcode:"このアーカイブにはプレビュー可能なスライス済みGコードがありません。まずBambu Studioで開いてスライスしてください。"},card:{previousPlate:"前のプレート",nextPlate:"次のプレート",plateNumber:"プレート {{index}}",moreOptions:"その他のオプション",addToFavorites:"お気に入りに追加",removeFromFavorites:"お気に入りから削除",cancelled:"キャンセル",failed:"失敗",duplicate:"重複",duplicateTitle:"このモデルは以前印刷されています",openSource3mf:"ソース3MFをBambu Studioで開く（右クリックでオプション表示）",downloadF3d:"Fusion 360デザインファイルをダウンロード",viewTimelapse:"タイムラプスを表示",viewPhoto:"写真を表示",viewPhotos:"{{count}}枚の写真を表示",openFolder:"フォルダーを開く: {{name}}",slicedFile:"スライス済みファイル - 印刷可能",sourceFile:"ソースファイルのみ - AMSマッピング不可",gcode:"GCODE",source:"ソース",project:"プロジェクト: {{name}}",estimated:"推定: {{time}}",actual:"実際: {{time}}",accuracy:"精度: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} レイヤー",layers:"{{count}} レイヤー",object:"{{count}}オブジェクト",objects:"{{count}}オブジェクト",slicedFor:"{{model}}用にスライス",uploadedBy:"アップロード者",noPermissionReprint:"再印刷する権限がありません",noFileForReprint:"3MFファイルがありません — 印刷記録時にプリンターからファイルをダウンロードできませんでした",noPermissionEdit:"プロファイルを編集する権限がありません",noPermissionDelete:"アーカイブを削除する権限がありません",reprint:"再印刷",schedulePrint:"印刷をスケジュール",schedule:"スケジュール",openInBambuStudio:"スライサーで開く",openInBambuStudioToSlice:"スライサーでスライス",slice:"スライス",externalLink:"外部リンク",makerWorld:"MakerWorld: {{designer}}",viewProject:"プロジェクトを表示",noExternalLink:"外部リンクなし",preview3d:"3Dプレビュー",download:"ダウンロード",edit:"編集",delete:"削除"},modal:{deleteArchive:"アーカイブを削除",deleteConfirm:'"{{name}}" を削除しますか？この操作は取り消せません。',deleteButton:"削除",removeSource3mf:"ソース3MFを削除",removeSource3mfConfirm:'"{{name}}"からソース3MFファイルを削除してもよろしいですか？元のスライサープロジェクトファイルが削除されます。',removeButton:"削除",removeF3d:"F3Dを削除",removeF3dConfirm:'"{{name}}"からFusion 360デザインファイルを削除してもよろしいですか？',removeTimelapse:"タイムラプスを削除",removeTimelapseConfirm:'"{{name}}"からタイムラプス動画を削除してもよろしいですか？',timelapse:"{{name}} - タイムラプス",selectTimelapse:"タイムラプスを選択",selectTimelapseDesc:"自動一致が見つかりませんでした。この印刷のタイムラプスを選択してください:",deleteArchives:"印刷アーカイブを削除",deleteArchivesConfirm:"{{count}}件のアーカイブを削除しますか？この操作は元に戻せません。",deleteCount:"{{count}}件を削除"},page:{title:"印刷アーカイブ",printsCount:"{{filtered}} / {{total}} 件のプリント",dropFilesHere:".3mfファイルをここにドロップ",releaseToUpload:"ドロップしてアップロード",only3mfSupported:".3mfファイルのみ対応しています",close:"閉じる",selected:"{{count}}件選択中",selectAll:"すべて選択",tags:"タグ",project:"プロジェクト",favorite:"お気に入り",delete:"削除",toggledFavorites:"{{count}}件のアーカイブのお気に入りを切替えました",failedUpdateFavorites:"お気に入りの更新に失敗しました",archivesDeleted:"{{count}}件のアーカイブを削除しました",failedDeleteArchives:"アーカイブの削除に失敗しました",photoDeleted:"写真を削除しました",failedDeletePhoto:"写真の削除に失敗しました"},list:{name:"名前",printer:"プリンター",date:"日付",size:"サイズ",actions:"操作",hasTimelapse:"タイムラプスあり"},log:{date:"日時",printName:"印刷名",printer:"プリンター",user:"ユーザー",status:"ステータス",duration:"所要時間",filament:"フィラメント",allPrinters:"全プリンター",allUsers:"全ユーザー",allStatuses:"全ステータス",cancelled:"キャンセル",skipped:"スキップ",dateFrom:"開始日",dateTo:"終了日",noEntries:"印刷ログが見つかりません",showing:"{{total}}件中{{count}}件を表示",rowsPerPage:"行数",page:"ページ",prev:"前へ",next:"次へ",clearLog:"ログをクリア",clearLogTitle:"印刷ログをクリア",clearLogConfirm:"すべての印刷ログエントリが完全に削除されます。アーカイブとキューアイテムには影響しません。この操作は元に戻せません。よろしいですか？",clearLogButton:"すべてクリア",cleared:"{{count}}件のログエントリを削除しました",clearFailed:"印刷ログの削除に失敗しました"}},queue:{title:"印刷キュー",subtitle:"印刷ジョブのスケジュールと管理",addToQueue:"キューに追加",print:"印刷",reprint:"再印刷",schedulePrint:"印刷をスケジュール",editQueueItem:"キューアイテムを編集",printToPrinters:"{{count}}台のプリンターで印刷",queueToPrinters:"{{count}}台のプリンターでキュー追加",queueSelectedPlates:"{{count}}プレートをキューに追加",selectAllPlates:"全{{count}}プレートを選択",deselectAll:"全て解除",printQueued:"キューに追加しました",itemsQueued:"{{count}}件をキューに追加しました",sending:"送信中...",sendingProgress:"送信中 {{current}}/{{total}}...",adding:"追加中...",addingProgress:"追加中 {{current}}/{{total}}...",savingProgress:"保存中 {{current}}/{{total}}...",clearQueue:"キューをクリア",clearHistory:"履歴をクリア",emptyQueue:"キューは空です",position:"順番",scheduledTime:"予定時刻",moveUp:"上に移動",moveDown:"下に移動",startNow:"今すぐ開始",printingInProgress:"印刷中...",viewArchive:"アーカイブを表示",viewInFileManager:"ファイルマネージャーで表示",itemCount:"{{count}}件",itemCount_plural:"{{count}}件のアイテム",dragToReorder:"ドラッグして並べ替え（ASAPのみ）",reorderHint:"順番はASAPアイテムのみに影響します。スケジュール済みアイテムは設定時刻に実行されます。",sjf:{label:"SJF",tooltip:"短いジョブ優先 — スケジューラーが短い印刷を優先します"},addedBy:"{{name}} が追加",nextInQueue:"次のキュー",clearPlateSuccess:"プレートをクリアしました — 次の印刷の準備完了",plateNumber:"プレート {{index}}",quantity:"数量",quantityHint:"{{count}}件のキューアイテムを作成",activeBatches:"アクティブなバッチ",batchProgress:"{{total}}件中{{completed}}件完了",cancelBatch:"残りをキャンセル",batchCancelled:"残りのバッチアイテムをキャンセルしました",cancelBatchConfirmTitle:"バッチをキャンセル",cancelBatchConfirmMessage:"このバッチの残りの保留中アイテムをすべてキャンセルしますか？",batch:"バッチ",sections:{currentlyPrinting:"印刷中",queued:"キュー中",history:"履歴"},status:{pending:"待機中",waiting:"待機中",printing:"印刷中",paused:"一時停止",completed:"完了",failed:"失敗",skipped:"スキップ",cancelled:"キャンセル済み"},summary:{printing:"印刷中",queued:"キュー中",totalTime:"キュー合計時間",totalWeight:"キュー合計重量",history:"履歴"},filter:{allPrinters:"すべてのプリンター",unassigned:"未割当",allStatus:"すべてのステータス",allLocations:"すべてのロケーション",any:"すべて"},sort:{byPosition:"順番で並べ替え",byName:"名前で並べ替え",byPrinter:"プリンターで並べ替え",bySchedule:"スケジュールで並べ替え",byDate:"日付で並べ替え",ascendingOldest:"昇順（古い順）",descendingNewest:"降順（新しい順）"},badges:{staged:"ステージ済み",requiresPrevious:"前の成功が必要",autoPowerOff:"自動電源オフ",gcodeInjection:"G-code"},empty:{title:"スケジュールされた印刷はありません",description:"アーカイブページのコンテキストメニューから「スケジュール」オプションを使用するか、ファイルをドラッグ＆ドロップして始めましょう。"},time:{asap:"即時",overdue:"期限超過",now:"今すぐ",lessThanMinute:"1分以内",inMinutes:"{{count}}分後",inHours:"{{count}}時間後"},actions:{stopPrint:"印刷を停止",startPrint:"印刷を開始",requeue:"再キュー"},bulkEdit:{title:"{{count}}件のアイテムを編集",title_plural:"{{count}}件のアイテムを編集",description:"変更した設定のみが選択されたアイテムに適用されます。",printer:"プリンター",noChange:"— 変更なし —",queueOptions:"キューオプション",staged:"ステージ済み",autoPowerOff:"印刷後に自動電源オフ",requirePrevious:"前の成功を必要とする",printOptions:"印刷オプション",bedLevelling:"ベッドレベリング",flowCalibration:"フローキャリブレーション",vibrationCalibration:"振動キャリブレーション",layerInspection:"第一層検査",timelapse:"タイムラプス",useAms:"AMS使用",applyChanges:"変更を適用",selectAll:"すべて選択",deselectAll:"すべて選択解除",selected:"{{count}}件選択中",editSelected:"選択を編集",cancelSelected:"選択をキャンセル"},confirm:{cancelTitle:"スケジュール済み印刷をキャンセル",cancelMessage:"「{{name}}」をキャンセルしますか？",stopTitle:"印刷を停止",stopMessage:"現在の印刷「{{name}}」を停止しますか？プリンター上の印刷ジョブがキャンセルされます。",removeTitle:"履歴から削除",removeMessage:"「{{name}}」をキュー履歴から削除しますか？",clearHistoryTitle:"履歴をクリア",clearHistoryMessage:"{{count}}件の履歴をすべて削除しますか？",cancelButton:"印刷をキャンセル",stopButton:"印刷を停止",thisPrint:"この印刷",thisItem:"このアイテム"},toast:{cancelled:"キャンセル済み",cancelFailed:"アイテムのキャンセルに失敗しました",removed:"キューアイテムを削除しました",removeFailed:"プロジェクトからのアーカイブ削除に失敗しました",stopped:"印刷を停止しました",stopFailed:"印刷の停止に失敗しました",released:"印刷をキューにリリースしました",startFailed:"印刷の開始に失敗しました",reorderFailed:"キューの並べ替えに失敗しました",historyCleared:"{{count}}件の履歴をクリアしました",clearHistoryFailed:"履歴のクリアに失敗しました",updateFailed:"アイテムの更新に失敗しました",bulkCancelled:"{{count}}件のアイテムをキャンセルしました",bulkCancelFailed:"アイテムのキャンセルに失敗しました"},timeline:{listView:"リスト",timelineView:"タイムライン",unassigned:"未割当",noData:"この日の予定された印刷はありません",allDoneBy:"すべての印刷は {{time}} までに完了予定",staged:"ステージング",filterAll:"すべて表示",filterPrinting:"印刷中",filterQueued:"待機中",time:{anyMoment:"まもなく",minutesLeft:"残り{{minutes}}分",hoursLeft:"残り{{hours}}時間",hoursMinutesLeft:"残り{{hours}}時間{{minutes}}分"},day:{previous:"前日",next:"翌日",today:"今日"}},permissions:{noStopPrint:"印刷を停止する権限がありません",noStartPrint:"印刷を開始する権限がありません",noEdit:"このキューアイテムを編集する権限がありません",noCancel:"このキューアイテムをキャンセルする権限がありません",noRequeue:"アイテムを再キューする権限がありません",noRemove:"このキューアイテムを削除する権限がありません",noClearHistory:"すべての履歴をクリアする権限がありません",noEditItems:"キューアイテムを編集する権限がありません",noCancelItems:"キューアイテムをキャンセルする権限がありません"}},backgroundDispatch:{unknownFile:"不明なファイル",unknownPrinter:"不明なプリンター",startingPrints:"印刷開始中",progressSummary:"{{complete}}/{{total}} 完了 • 配信済み: {{dispatched}} • 処理中: {{processing}}",expandDetails:"配信詳細を展開",collapseDetails:"配信詳細を折りたたむ",dismissToast:"配信トーストを閉じる",cancelDispatchJob:"配信ジョブをキャンセル",cancel:"キャンセル",cancelling:"キャンセル中…",awaitingPrinter:"プリンターを待機中…",status:{dispatched:"配信済み",processing:"処理中",completed:"完了",failed:"失敗",cancelled:"キャンセル済み"},toast:{cancellingUpload:"アップロードをキャンセル中...",cancelled:"配信をキャンセルしました",cancelFailed:"配信のキャンセルに失敗しました",completeWithFailures:"バックグラウンド配信完了: {{completed}} 件成功、{{failed}} 件失敗",completeSuccess:"バックグラウンド配信完了: {{completed}} 件成功",printStartedRemaining:"{{completed}} 件の印刷を開始、残り {{remaining}} 件送信中..."}},stats:{title:"統計",subtitle:"ウィジェットをドラッグして並べ替え。目のアイコンをクリックして非表示。",overview:"概要",totalPrints:"総印刷数",successRate:"成功率",totalPrintTime:"総印刷時間",printTime:"印刷時間",totalFilament:"総フィラメント使用量",filamentUsed:"フィラメント使用量",filamentCost:"フィラメントコスト",totalCost:"総コスト",energyUsed:"エネルギー使用量",energyCost:"エネルギーコスト",energyWarmingUpTooltip:"エネルギー追跡は毎時スナップショットを収集中です。選択範囲の前に少なくとも1つのスナップショットが存在すると、期間合計が正確になります。初期値は過小になる場合があります。",averagePrintTime:"平均印刷時間",printsPerDay:"1日あたりの印刷数",byPrinter:"プリンター別",printsByPrinter:"プリンター別印刷数",byMaterial:"素材別",byMonth:"月別",last7Days:"過去7日間",last30Days:"過去30日間",last90Days:"過去90日間",allTime:"全期間",quickStats:"クイック統計",printActivity:"印刷アクティビティ",filamentTypes:"フィラメントタイプ",filamentTrends:"フィラメントトレンド",failureAnalysis:"失敗分析",timeAccuracy:"時間精度",successful:"成功",failed:"失敗",perfectEstimate:"100% = 完全な推定",noTimeAccuracyData:"時間精度データがありません",noFilamentData:"フィラメントデータがありません",noPrinterData:"プリンターデータがありません",noPrintData:"印刷データがありません",noPrintDataLast30Days:"過去30日間の印刷データがありません",failureReasons:"失敗理由",topFailureReasons:"主な失敗理由",failedPrintsCount:"{{failed}} / {{total}} 件の印刷が失敗",lastWeekRate:"先週: {{rate}}%",resetLayout:"レイアウトをリセット",recalculateCosts:"コストを再計算",recalculateCostsHint:"現在のフィラメント価格ですべてのアーカイブコストを再計算",exportStats:"統計をエクスポート",exportAsCsv:"CSVでエクスポート",exportAsExcel:"Excelでエクスポート",hiddenCount:"{{count}}件非表示",exportDownloaded:"エクスポートをダウンロードしました",exportFailed:"エクスポートに失敗しました",layoutReset:"レイアウトをリセットしました",recalculatedCosts:"{{count}}件のアーカイブのコストを再計算しました",recalculateFailed:"コストの再計算に失敗しました",loadingStats:"統計を読み込み中...",noPermissionResetLayout:"レイアウトをリセットする権限がありません",noPermissionRecalculate:"コストを再計算する権限がありません",noPrintDataInRange:"選択した期間にデータがありません",periodFilament:"フィラメント使用量",periodCost:"コスト",avgPerPrint:"1印刷あたりの平均",usageOverTime:"時間推移",filamentByWeight:"重量",printDuration:"印刷時間分布",printerUtilization:"プリンター稼働率",filamentSuccess:"素材別成功率",printHabits:"印刷習慣",printTimeOfDay:"時間帯別プリント",colorDistribution:"カラー分布",noColorData:"カラーデータがありません",records:"記録",longestPrint:"最長プリント",heaviestPrint:"最重プリント",mostExpensivePrint:"最高額",busiestDay:"最多プリント日",successStreak:"連続成功",streakPrint:"連続プリント",streakPrints:"{{count}}連続プリント",printerStats:"プリンター統計",hours:"時間",avgPrints:"平均印刷数",noArchiveData:"印刷データがありません",filamentByTime:"推移",avgWeight:"平均重量",avgTime:"平均時間",filamentByPrints:"印刷数",timeframe:{today:"今日","this-week":"今週","this-month":"今月","last-7":"過去7日間","last-30":"過去30日間","last-90":"過去90日間","this-year":"今年","all-time":"全期間",custom:"カスタム",from:"開始",to:"終了"},allUsers:"全ユーザー",noUser:"ユーザーなし（システム）",filterByUser:"ユーザーでフィルター"},maintenance:{title:"メンテナンス",overview:"概要",allOk:"すべてのメンテナンスは最新です",dueCount:"{{count}}件の期限到来",dueCount_plural:"{{count}}件の期限到来",warningCount:"{{count}}件の警告",warningCount_plural:"{{count}}件の警告",totalPrintTime:"総印刷時間",nextMaintenance:"次回メンテナンス",nothingDue:"予定なし",tasks:"タスク",lastPerformed:"前回実施日",interval:"間隔",hoursRemaining:"残り{{hours}}時間",hoursOverdue:"{{hours}}時間超過",markDone:"完了にする",performMaintenance:"メンテナンスを実施",history:"履歴",noHistory:"メンテナンス履歴がありません",editPrintHours:"印刷時間を編集",currentHours:"現在の時間",statusTab:"ステータス",settingsTab:"設定",overdueCount:"{{count}}件超過",dueSoonCount:"{{count}}件まもなく期限",dueSoon:"まもなく期限",allGood:"問題なし",overdueBy:"{{duration}}超過",dueIn:"あと{{duration}}",timeLeft:"残り{{duration}}",day:"1日",days:"{{count}} 日",week:"1週間",weeks:"{{count}}週間",month:"1ヶ月",months:"{{count}}ヶ月",year:"1年",maintenanceTypes:"メンテナンスタイプ",maintenanceTypesDescription:"システムタイプとカスタムメンテナンスタスク",addCustomType:"カスタムタイプを追加",restoreDefaults:"デフォルトタスクを復元",intervalType:"インターバルタイプ",intervalValue:"間隔 ({{type}})",icon:"アイコン",documentationLink:"ドキュメントリンク（任意）",assignToPrinters:"プリンターに割り当て",selectAtLeastOnePrinter:"プリンターを1台以上選択してください",addType:"タイプを追加",custom:"カスタム",printHours:"印刷時間",calendarDays:"カレンダー日数",exampleName:"例: HEPAフィルター交換",viewDocumentation:"ドキュメントを表示",timeBasedInterval:"時間ベースのインターバル",intervalOverrides:"インターバルのオーバーライド",intervalOverridesDescription:"特定のプリンターの間隔をカスタマイズ",assignedToPrinters:"割り当て済みプリンター：",noPrintersAssigned:"プリンター未割り当て",addPrinterShort:"追加:",printersAssignedClick:"{{count}}台のプリンターを割り当て済み - クリックして管理",removeFromPrinter:"このプリンターから削除",types:{lubricateCarbonRods:"カーボンロッドの潤滑",lubricateRails:"リニアレールの潤滑",cleanNozzle:"ノズル/ホットエンドの清掃",checkBelts:"ベルト張力の確認",cleanBuildPlate:"ビルドプレートの清掃",checkExtruder:"エクストルーダーギアの確認",checkCooling:"冷却ファンの確認",generalInspection:"総合点検",cleanCarbonRods:"カーボンロッドの清掃",lubricateSteelRods:"スチールロッドの潤滑",cleanSteelRods:"スチールロッドの清掃",cleanLinearRails:"リニアレールの清掃",checkPtfeTube:"PTFEチューブの確認",replaceHepaFilter:"HEPAフィルター交換",replaceCarbonFilter:"カーボンフィルター交換",lubricateLeftNozzleRail:"左ノズルレールの潤滑"},maintenanceComplete:"メンテナンスを完了としてマークしました",typeUpdated:"メンテナンスタイプを更新しました",typeDeleted:"メンテナンスタイプを削除しました",defaultsRestored:"デフォルトタスクを{{count}}件復元しました",printHoursUpdated:"印刷時間を更新しました",printerAssigned:"プリンターを割り当てました",printerRemoved:"プリンターを削除しました",deleteTypeConfirm:"「{{name}}」を削除しますか？",deleteSystemTypeTitle:"デフォルトのメンテナンスタスクを削除しますか？",deleteSystemTypeMessage:"デフォルトのメンテナンスタスク「{{name}}」を削除してもよろしいですか？",noPermissionUpdate:"メンテナンス記録を更新する権限がありません",noPermissionPerform:"メンテナンスを実行する権限がありません",noPermissionEditTypes:"メンテナンスタイプを編集する権限がありません",noPermissionDeleteTypes:"メンテナンスタイプを削除する権限がありません",noPermissionEditHours:"メンテナンス時間を編集する権限がありません",noPermissionRemovePrinter:"プリンターの割り当てを解除する権限がありません",noPermissionAssignPrinter:"プリンターを割り当てる権限がありません",noPermissionEditIntervals:"メンテナンス間隔を編集する権限がありません",configureSettings:"メンテナンスタイプと間隔を設定"},settings:{title:"設定",general:"一般",tabs:{general:"一般",smartPlugs:"スマートプラグ",notifications:"通知",queue:"ワークフロー",filament:"フィラメント",network:"ネットワーク",apiKeys:"APIキー",virtualPrinter:"仮想プリンター",spoolbuddy:"SpoolBuddy",failureDetection:"失敗検出",users:"認証",backup:"バックアップ",emailAuth:"メール認証",ldap:"LDAP",twoFa:"二段階認証",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy デバイス",infoBody:"SpoolBuddy キオスクはハートビートにより自動的に登録されます。使用されなくなった場合や、デーモンのクラッシュにより古い重複が残った場合は、ここでデバイスの登録を解除してください。",duplicatesTitle:"{{count}} 台のデバイスが登録されています",duplicatesBody:"キオスク UI は最初に登録されたデバイスのみを使用します。クラッシュによる古い重複がある場合は登録解除してください。オンラインのデバイスは次回のハートビートで自動的に再登録されます。",empty:"SpoolBuddy デバイスはまだ登録されていません。",online:"オンライン",offline:"オフライン",unregister:"登録解除",unregisterSuccess:"デバイスの登録を解除しました",unregisterError:"デバイスの登録解除に失敗しました",confirmTitle:"SpoolBuddy デバイスの登録を解除しますか？",confirmBody:"「{{hostname}}」（{{deviceId}}）をデータベースから削除します。デバイスがオンラインの場合、次回のハートビートで自動的に再登録されます。",ipAddress:"IPアドレス",firmware:"ファームウェア",lastSeen:"最終接続",daemonUptime:"デーモン稼働時間",systemUptime:"システム稼働時間",never:"なし",nfc:"NFC",scale:"計量器",cpuTemp:"CPU 温度",memory:"メモリ",disk:"ディスク",update:"アップデート",updateConfirmTitle:"Spoolbuddyデーモンを更新しますか？",updateConfirmBody:'"{{hostname}}"のソフトウェア更新を実行しますか？更新後にデーモンが再起動されます。',restartBrowser:"ブラウザを再起動",restartBrowserConfirmTitle:"キオスクブラウザを再起動しますか？",restartBrowserConfirmBody:'"{{hostname}}"のキオスクブラウザを再起動しますか？画面が一時的に消えます。',restartDaemon:"デーモンを再起動",restartDaemonConfirmTitle:"Spoolbuddyデーモンを再起動しますか？",restartDaemonConfirmBody:'"{{hostname}}"のSpoolbuddyデーモンを再起動しますか？デバイスが数秒間オフラインになります。',reboot:"再起動",rebootConfirmTitle:"デバイスを再起動しますか？",rebootConfirmBody:'"{{hostname}}"を再起動しますか？デバイスは約1分間オフラインになります。',shutdown:"シャットダウン",shutdownConfirmTitle:"デバイスをシャットダウンしますか？",shutdownConfirmBody:'"{{hostname}}"をシャットダウンしますか？再起動には物理的なアクセスが必要です。',commandConfirm:"確認",commandQueued:"コマンドをキューに追加しました",commandError:"コマンドの送信に失敗しました"},ldap:{title:"LDAP認証",enabledDesc:"LDAP認証が有効です",disabledDesc:"LDAP認証が無効です",disabledHint:"以下のLDAP設定を構成して保存し、有効にしてください。",enabled:"LDAP認証を有効にしました",disabled:"LDAP認証を無効にしました",feature1:"LDAP資格情報でログインできます",feature2:"ローカル管理者アカウントはフォールバックとして残ります",feature3:"ログイン時にLDAPグループがBamBuddyグループにマッピングされます",serverConfig:"LDAPサーバー設定",serverUrl:"サーバーURL",serverUrlHint:"標準はldap://、SSL接続はldaps://を使用",security:"セキュリティ",securityHint:"StartTLSはプレーン接続をTLSにアップグレードします。LDAPSは最初からTLSを使用します。",bindDn:"バインドDN（サービスアカウント）",bindPassword:"バインドパスワード",searchBase:"検索ベースDN",userFilter:"ユーザー検索フィルター",userFilterHint:"{username}はログインユーザー名に置き換えられます。OpenLDAPの場合は(uid={username})を使用。",autoProvision:"ユーザー自動作成",autoProvisionHint:"初回LDAPログイン時にBamBuddyアカウントを自動作成",defaultGroup:"デフォルトグループ",defaultGroupNone:"— なし（フォールバックなし）—",defaultGroupHint:"LDAPユーザーが認証されたがマッピングされたLDAPグループに属していない場合に割り当てられるフォールバックグループ。空欄の場合、マッピングされていないユーザーは権限なしのままになります。",groupMapping:"グループマッピング（JSON）",groupMappingHint:"LDAPグループDNをBamBuddyグループにマッピング。利用可能なグループ: ",testConnection:"接続テスト",settingsSaved:"LDAP設定を保存しました",errors:{serverRequired:"LDAPサーバーURLは必須です",searchBaseRequired:"検索ベースDNは必須です",enableAuthFirst:"先に認証を有効にしてください",configureLdapFirst:"先にLDAP設定を保存してください"}},email:{smtpSettings:"SMTP設定",smtpHost:"SMTPサーバー",smtpPort:"SMTPポート",security:"セキュリティ",authentication:"認証",username:"ユーザー名",password:"パスワード",fromEmail:"送信元メールアドレス",fromName:"送信者名",testConnection:"SMTP接続テスト",testRecipient:"テスト受信者メール",sendTest:"テストメール送信",sending:"送信中...",save:"設定を保存",saving:"保存中...",advancedAuth:"高度な認証",advancedAuthEnabled:"高度な認証が有効です",advancedAuthEnabledDesc:"メールベースのユーザー管理機能が有効になっています。新規ユーザーには自動生成されたパスワードがメールで送信され、ユーザーはパスワード忘れ機能でパスワードをリセットできます。",advancedAuthDisabled:"高度な認証が無効です",advancedAuthDisabledDesc:"高度な認証を有効にして、ユーザー管理のメールベース機能を有効化してください。",enable:"有効にする",disable:"無効にする",feature1:"パスワードは自動生成され、新規ユーザーにメールで送信されます",feature2:"ユーザーはユーザー名またはメールでログインできます",feature3:"パスワード忘れ機能が利用可能です",feature4:"管理者はメールでユーザーパスワードをリセットできます",errors:{requiredFields:"すべての必須フィールドに入力してください",usernameRequired:"認証が有効な場合、ユーザー名は必須です",enterTestEmail:"テストメールアドレスを入力してください",smtpServerAndEmail:"テストする前にSMTPサーバーと送信元メールを入力してください",usernamePasswordRequired:"認証が有効な場合、ユーザー名とパスワードは必須です",configureSmtpFirst:"最初にSMTP設定を構成してテストしてください",enableAuthFirst:"メール関連機能をご利用いただくには、まず認証を有効にしてください。"},success:{settingsSaved:"SMTP設定を保存しました"},securityOptions:{starttls:"STARTTLS (ポート 587)",ssl:"SSL/TLS (ポート 465)",none:"なし (ポート 25)"},authOptions:{enabled:"有効",disabled:"無効"}},appearance:"外観",notifications:"通知",smartPlugs:"スマートプラグ",spoolman:"Spoolman",updates:"アップデート",language:"言語",languageDescription:"表示言語を選択してください",theme:"テーマ",themeLight:"ライト",themeDark:"ダーク",themeSystem:"システム設定に従う",defaultView:"デフォルト画面",defaultViewDescription:"アプリ起動時に表示するページ",checkForUpdates:"アップデートを確認",autoUpdate:"自動アップデート",currentVersion:"現在のバージョン",latestVersion:"最新バージョン",upToDate:"最新です",updateAvailable:"アップデートあり",notificationLanguage:"通知の言語",notificationLanguageDescription:"プッシュ通知の言語",bedCooledThreshold:"ベッド冷却しきい値",bedCooledThresholdDescription:"印刷後にベッドが冷却されたと見なす温度",userNotificationsEnabled:"ユーザー通知",userNotificationsEnabledDescription:"ユーザー通知メニューと印刷ジョブイベントのメール通知を有効にします。高度な認証が必要です。",userNotificationsDisabledHint:"ユーザー通知を使用するには高度な認証を有効にしてください。",notificationProviders:"通知プロバイダー",addProvider:"プロバイダーを追加",editProvider:"プロバイダーを編集",providerType:"プロバイダーの種類",testNotification:"テスト通知",testSuccess:"テスト通知を送信しました",testFailed:"テスト通知の送信に失敗しました",quietHours:"おやすみ時間",quietHoursDescription:"この時間帯は通知を送信しません",quietHoursStart:"開始",quietHoursEnd:"終了",events:{title:"通知イベント",printStart:"印刷開始",printComplete:"印刷完了",printFailed:"印刷失敗",printStopped:"印刷中止",printProgress:"進捗マイルストーン",printProgressDescription:"25%, 50%, 75%で通知",printerOffline:"プリンターオフライン",printerError:"プリンターエラー",filamentLow:"フィラメント残量低下",maintenanceDue:"メンテナンス期限",maintenanceDueDescription:"メンテナンスが必要なときに通知"},smartPlug:{title:"スマートプラグ",add:"スマートプラグを追加",edit:"スマートプラグを編集",name:"名前",ipAddress:"IPアドレス",linkedPrinter:"連携プリンター",autoOn:"自動電源オン",autoOnDescription:"印刷開始時に電源を入れる",autoOff:"自動電源オフ",autoOffDescription:"印刷完了後に電源を切る",offDelay:"オフ遅延",offDelayMinutes:"印刷後の待機時間（分）",offDelayTemp:"ノズル温度が下回ったとき",currentState:"現在の状態",turnOn:"電源オン",turnOff:"電源オフ"},filamentTracking:"フィラメント追跡",filamentTrackingDesc:"フィラメントスプールの追跡方法を選択してください。内蔵インベントリまたは外部Spoolmanサーバーを使用できます。",filamentChecks:"フィラメントチェック",disableFilamentWarnings:"フィラメント警告を無効化",disableFilamentWarningsDesc:"印刷またはキュー追加時にフィラメント不足の警告を表示しない",preferLowestFilament:"残量が少ないフィラメントを優先",preferLowestFilamentDesc:"複数のスプールが一致する場合、残量が最も少ないものを使用します",trackingModeBuiltIn:"内蔵インベントリ",trackingModeBuiltInDesc:"RFID自動検出と使用量追跡を含む",trackingModeSpoolmanDesc:"外部フィラメント管理サーバー",builtInFeatureRfid:"AMS内のBambu Lab RFIDスプールを自動検出",builtInFeatureUsage:"プリントごとのフィラメント消費量を追跡",builtInFeatureCatalog:"スプール、カラー、K値プロファイルを管理",builtInFeatureThirdParty:"サードパーティ製スプールをインベントリスプールに割り当て可能",amsSyncButton:"AMSから重量を同期",amsSyncTitle:"AMSからスプール重量を同期",amsSyncMessage:"接続されたプリンターの現在のAMS残量値で、すべてのインベントリスプール重量を上書きします。破損した重量データの復旧に使用してください。プリンターがオンラインである必要があります。",amsSyncing:"同期中...",amsSyncSuccess:"{{synced}}個のスプールを同期、{{skipped}}個をスキップ",amsSyncError:"AMSからの重量同期に失敗しました",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolmanサーバーのurl（例：http://localhost:7912）",spoolmanConnected:"接続中",spoolmanDisconnected:"未接続",status:"ステータス",connect:"接続",disconnect:"切断",howSyncWorks:"同期の仕組み",syncInfoRfidOnly:"RFIDを搭載した公式Bambu Labスプールのみ同期されます",syncInfoAutoCreate:"新しいスプールは初回同期時にSpoolmanに自動作成されます",syncInfoThirdPartySkipped:"Bambu Lab以外のスプール（サードパーティ、リフィル）はスキップされます",linkingExistingSpools:"既存スプールのリンク",linkingExistingSpoolsDesc:"既存のSpoolmanスプールをAMSにリンクするには、AMSスロットにカーソルを合わせて「Spoolmanにリンク」をクリックしてください。",syncMode:"同期モード",syncModeAuto:"自動",syncModeManual:"手動のみ",syncModeAutoDesc:"変更が検出されるとAMSデータが自動的に同期されます",syncModeManualDesc:"手動でトリガーした場合のみ同期",syncAmsData:"AMSデータを同期",syncAmsDataDesc:"プリンターのAMSデータをSpoolmanに手動同期",allPrinters:"全プリンター",noDefaultPrinter:"デフォルトなし（毎回選択）",sidebarOrder:"サイドバーの順序",saveThumbnails:"サムネイルを保存",captureFinishPhoto:"完了写真を撮影",noPrintersConfigured:"プリンターが設定されていません",archiveMode:{always:"常にアーカイブを作成",never:"アーカイブを作成しない",ask:"毎回確認"},checkForUpdatesLabel:"アップデートを確認",checkPrinterFirmware:"プリンターファームウェアの確認",includeBetaUpdates:"ベータ版を含める",includeBetaUpdatesDesc:"アップデート確認時にベータ版およびプレリリース版を通知する",enableRetry:"リトライを有効化",homeAssistantDescription:"Home Assistantに接続してHA REST APIでスマートプラグを制御します。switch、light、input_booleanエンティティに対応しています。",environmentManagedLabel:"(環境変数で管理)",autoEnabledViaEnv:"環境変数により自動的に有効化されました",urlFromEnvReadOnly:"HA_URL環境変数で設定された値（読み取り専用）",tokenFromEnvReadOnly:"HA_TOKEN環境変数で設定された値（読み取り専用）",mqttConnectedTo:"接続先:",prometheusDescription:"プリンターデータをPrometheus形式で公開",noSmartPlugsTitle:"スマートプラグが設定されていません",noSmartPlugsDescription:"Tasmotaベースのスマートプラグを追加して、エネルギー消費を追跡し、電源制御を自動化します。",noProvidersTitle:"プロバイダーが設定されていません",noProvidersDescription:"アラートを受信するにはプロバイダーを追加してください。",noTemplatesAvailable:"テンプレートがありません。バックエンドを再起動してデフォルトテンプレートを生成してください。",apiPermissionView:"プリンターステータスとキューを表示",apiPermissionEdit:"印刷キューにアイテムを追加・削除",apiKeysEmptyTitle:"APIキーがありません",apiKeysEmptyDescription:"外部サービスと連携するためのAPIキーを作成してください。",noUsersFound:"ユーザーが見つかりません",noGroupsFound:"グループが見つかりません",noGroupsAvailable:"利用可能なグループがありません",passwordsDoNotMatch:"パスワードが一致しません",systemGroupWarning:"システムグループ名は変更できません",authDisabledTitle:"認証が無効です",authDisabledFeature1:"システムへのアクセスにログインを要求",authDisabledFeature2:"グループベースの権限で複数ユーザーを作成",authDisabledFeature3:"50以上のきめ細かな権限でアクセスを制御",userHasCreated:"このユーザーは以下を作成しています：",userItemsQuestion:"これらのアイテムをどうしますか？",deleteUserConfirm:"このユーザーを削除してもよろしいですか？この操作は元に戻せません。",actionCannotBeUndone:"この操作は元に戻せません",addFirstSmartPlug:"最初のスマートプラグを追加",providers:"プロバイダー",log:"ログ",testAll:"すべてテスト",testResults:"テスト結果",testPassedCount:"{{count}}件成功",testFailedCount:"{{count}}件失敗",messageTemplates:"メッセージテンプレート",messageTemplatesDescription:"各イベントの通知メッセージをカスタマイズ。",apiKeys:"APIキー",apiKeysDescription:"外部連携やWebhook用のAPIキーを作成します。",createKey:"キーを作成",apiKeyCreated:"APIキーを作成しました",apiKeyCopyWarning:"今すぐこのキーをコピーしてください - 再表示されません！",useInApiBrowser:"APIブラウザーで使用",createNewApiKey:"新しいAPIキーを作成",keyName:"キー名",keyNamePlaceholder:"例: Home Assistant, OctoPrint",readStatus:"ステータスの読み取り",readStatusDescription:"プリンターのステータスとキューを表示",manageQueue:"キューの管理",manageQueueDescription:"印刷キューへのアイテムの追加と削除",controlPrinter:"プリンターの制御",controlPrinterDescription:"印刷の一時停止、再開、停止",unnamedKey:"名前なしキー",lastUsed:"最終使用:",read:"読み取り",control:"制御",createFirstKey:"最初のキーを作成",webhookEndpoints:"Webhookエンドポイント",webhookApiKeyHint:"X-API-KeyヘッダーでAPIキーを使用してください。",webhook:{getAllStatus:"全プリンターステータスを取得",getSpecificStatus:"特定のプリンターステータスを取得",addToQueue:"印刷キューに追加",pausePrint:"印刷を一時停止",resumePrint:"印刷を再開",stopPrint:"印刷を停止"},apiBrowser:"APIブラウザ",apiBrowserDescription:"すべての利用可能なAPIエンドポイントを探索してテストします。",apiKeyForTesting:"テスト用APIキー",apiKeyPlaceholder:"CallMeBot APIキー",apiKeyHint:"このキーはX-API-Keyヘッダーとしてリクエストに送信されます。",deleteApiKeyTitle:"APIキーを削除",deleteApiKeyMessage:"このAPIキーを削除してもよろしいですか？このキーを使用しているすべての連携が動作しなくなります。",deleteKey:"キーを削除",amsDisplayThresholds:"AMS表示しきい値",amsThresholdsDescription:"AMS湿度と温度インジケーターの色しきい値を設定します。",humidity:"湿度",goodGreen:"良好（緑）≤",fairOrange:"普通（オレンジ）≤",aboveFairBad:"普通のしきい値以上は赤（悪い）で表示",fairAlsoDryingThreshold:"このしきい値は自動乾燥のトリガーにも使用されます",temperature:"温度",goodBlue:"良好（青）≤",aboveFairHot:"普通のしきい値以上は赤（高温）で表示",historyRetention:"履歴の保持",keepSensorHistory:"センサー履歴の保持期間",historyRetentionDescription:"古い湿度と温度データは自動的に削除されます",defaultPrintOptions:"デフォルト印刷オプション",defaultPrintOptionsDescription:"新しい印刷のデフォルト値を設定します。印刷ダイアログで個別に変更できます。",defaultBedLevelling:"ベッドレベリング",defaultBedLevellingDesc:"印刷前にベッドを自動レベリング",defaultFlowCali:"フローキャリブレーション",defaultFlowCaliDesc:"押出フローのキャリブレーション",defaultVibrationCali:"振動キャリブレーション",defaultVibrationCaliDesc:"リンギングアーティファクトを低減",defaultLayerInspect:"第1層検査",defaultLayerInspectDesc:"AIによる第1層の検査",defaultTimelapse:"タイムラプス",defaultTimelapseDesc:"タイムラプス動画を記録",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"プレートクリア確認",requirePlateClear:"プレートクリア確認を必須にする",requirePlateClearDescription:"有効にすると、スケジューラーは完了したプリンターでキューの印刷を開始する前に、プリンターごとのプレートクリア確認を待ちます。無効にすると、プリンターカード上のプレート状態バッジと「プレートをクリア済みにする」ボタンも非表示になります。",gcodeInjection:"G-codeインジェクション",gcodeInjectionDescription:"Farmloop、SwapMod、AutoClear、Printflow 3Dなどの自動印刷システム用に、印刷の開始と終了時にカスタムG-codeを挿入します。スニペットはプリンターモデルごとに設定し、キューアイテム��「G-codeを挿入」を有効にすると適用されます。",gcodeInjectionNoPrinters:"プリンターが見つかりません。G-codeスニペットを設定するにはプリンターを追加してください。",gcodeStartLabel:"開始G-code",gcodeEndLabel:"終了G-code",gcodeStartPlaceholder:"印刷開始前に挿入されるG-code...",gcodeEndPlaceholder:"印刷終了後に追加されるG-code...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"自動乾燥",queueDryingDescription:"キュー印刷の合間にプリンターがアイドル状態の時、AMSフィラメントを自動的に乾燥します。上記の湿度しきい値を使用します。",queueDryingEnabled:"自動乾燥を有効にする",queueDryingEnabledDescription:"プリンターがアイドル状態で湿度がしきい値を超えた場合、AMS乾燥を自動的に開始",queueDryingBlock:"乾燥完了まで待機",queueDryingBlockDescription:"乾燥が完了するまで印刷キューをブロックします。オフの場合、印刷が優先されます。",ambientDryingEnabled:"常時乾燥",ambientDryingEnabledDescription:"キューに関係なく、アイドル状態のプリンターで湿度がしきい値を超えた場合に自動的にフィラメントを乾燥。",dryingPresets:"乾燥プリセット",dryingPresetsDescription:"フィラメントタイプごとの温度と時間。AMS 2 Proは低温、AMS-HTは高温に対応。",dryingFilament:"フィラメント",printModal:"印刷ダイアログ",expandCustomMapping:"カスタムマッピングをデフォルトで展開",expandCustomMappingDescription:"複数プリンターに印刷する際、プリンターごとのAMSマッピングを展開表示",authentication:"認証",authEnabledDescription:"ユーザー認証でインスタンスが保護されています",authDisabledDescription:"認証を有効にして、ユーザーアカウントの作成、権限の管理、Bambuddyインスタンスのセキュリティを確保しましょう。",authDisabledMessage:"認証を有効にして、ユーザーアカウントの作成、権限の管理、Bambuddyインスタンスのセキュリティを確保しましょう。",enableAuthentication:"認証を有効にする",currentUser:"現在のユーザー",changePassword:"パスワードを変更",admin:"管理者",users:"ユーザー",addUser:"ユーザーを追加",groups:"グループ",addGroup:"グループを追加",system:"システム",noDescription:"説明なし",userCount:"{{count}}人のユーザー",permissionCount:"{{count}}件の権限",createUser:"ユーザーを作成",username:"ユーザー名",enterUsername:"ユーザー名を入力",password:"パスワード",enterPassword:"パスワードを入力（6文字以上）",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"パスワードを確認",viewReleaseOnGitHub:"GitHubでリリースを表示",turnAllPlugsOn:"すべてのプラグをオン",turnAllPlugsOff:"すべてのプラグをオフ",clearNotificationLogs:"通知ログをクリア",clearLogsMessage:"30日以上前のすべての通知ログを完全に削除します。この操作は元に戻せません。",clearLogs:"通知ログを削除",resetUiPreferences:"UI設定をリセット",resetUiPreferencesMessage:"すべてのUI設定をデフォルトにリセットします：サイドバー順序、テーマ、ダッシュボードレイアウト、表示モード、ソート設定。プリンター、アーカイブ、サーバー設定は影響を受けません。クリア後にページがリロードされます。",resetPreferences:"設定をリセット",deleteGroupTitle:"グループを削除",deleteGroupMessage:"このグループを削除しますか？このグループのユーザーはこれらの権限を失います。",deleteGroup:"グループを削除",disableAuthenticationTitle:"認証を無効化",disableAuthenticationMessage:"認証を無効にしますか？Bambuddyインスタンスにログインなしでアクセスできるようになります。ユーザーはデータベースに残りますが、認証は無効になります。",disableAuthentication:"認証を無効化",configureBambuddy:"Bambuddyを設定",systemDefault:"システムデフォルト",archiveSettings:"アーカイブ設定",newWindow:"新しいウィンドウ",embeddedOverlay:"埋め込みオーバーレイ",preferredSlicer:"優先スライサー",preferredSlicerDescription:"ファイルを開くスライサーアプリケーションを選択",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"外部カメラ",costTracking:"コスト追跡",printsOnly:"印刷のみ",totalConsumption:"総消費量",dataManagement:"データ管理",storageUsage:"ストレージ使用量",storageUsageDescription:"カテゴリ別のデータ使用量の内訳",storageUsageTotal:"合計",storageUsageErrors:"エラー",storageUsageOtherBreakdown:"その他（静的アセット、スクリプト、設定ファイルを含む）",storageUsageSystem:"システム",storageUsageData:"データ",storageUsageUnavailable:"ストレージ使用量情報は利用できません",clearNotificationLogsDescription:"30日以上前の通知ログを削除",resetUiPreferencesDescription:"サイドバー順序、テーマ、表示モード、レイアウト設定をリセット。プリンター、アーカイブ、設定は影響を受けません。",enableHomeAssistant:"Home Assistantを有効化",enableMqtt:"MQTTを有効化",useTls:"TLSを使用",enableMetricsEndpoint:"メトリクスエンドポイントを有効化",availableMetrics:"利用可能なメトリクス",editUser:"ユーザーを編集",deleteUserTitle:"ユーザーを削除",groupName:"グループ名",leaveEmptyForAnonymous:"匿名の場合は空のまま",leaveEmptyForNoAuth:"認証なしの場合は空のまま",enterNewPassword:"新しいパスワードを入力",confirmNewPassword:"新しいパスワードを確認",enterGroupName:"グループ名を入力",enterDescriptionOptional:"説明を入力（任意）",enterCurrentPassword:"現在のパスワードを入力",enterNewPasswordMin6:"新しいパスワードを入力（6文字以上）",toast:{keyCopied:"キーをクリップボードにコピーしました",copyFailed:"キーのコピーに失敗しました",keyAddedToBrowser:"キーをAPIブラウザに追加しました",clearLogsFailed:"ログの削除に失敗しました",uiPreferencesReset:"UI設定をリセットしました。更新中...",authDisabled:"認証を無効にしました",authDisableFailed:"認証の無効化に失敗しました",apiKeyCreated:"APIキーを作成しました",apiKeyDeleted:"APIキーを削除しました",userCreated:"ユーザーが正常に作成されました",userUpdated:"ユーザーが正常に更新されました",userDeleted:"ユーザーが正常に削除されました",groupCreated:"グループを作成しました",groupUpdated:"グループを更新しました",groupDeleted:"グループを削除しました",fillRequiredFields:"必須項目をすべて入力してください",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です",enterGroupName:"グループ名を入力",settingsSaved:"設定を保存しました",noPermissionUpdate:"設定を変更する権限がありません",cameraSettingsSaved:"カメラ設定を保存しました",enterCameraUrl:"カメラURLを入力してください",passwordChanged:"パスワードが正常に変更されました",connectionFailed:"接続失敗",testFailed:"テスト通知の送信に失敗しました",cameraConnected:"カメラ接続{{resolution}}"},testConnection:"接続テスト",catalog:{spoolCatalog:"スプールカタログ",spoolCatalogDescription:"ブランド/タイプ別の空スプール重量。スプール追加時の自動重量検索に使用されます。",searchCatalog:"カタログを検索...",addNewEntry:"新しいエントリを追加",namePlaceholder:"名前（例：Bambu Lab - プラスチック）",weight:"重量",type:"タイプ",default:"デフォルト",custom:"カスタム",noMatch:"検索に一致するエントリがありません",empty:"カタログにエントリがありません",deleteEntry:"エントリを削除",deleteConfirm:"「{{name}}」を削除してもよろしいですか？",resetCatalog:"カタログをリセット",resetConfirm:"カタログをデフォルトにリセットしますか？カスタムエントリはすべて削除されます。",loadFailed:"スプールカタログの読み込みに失敗しました",nameWeightRequired:"名前と重量は必須です",entryAdded:"エントリを追加しました",addFailed:"エントリの追加に失敗しました",entryUpdated:"エントリを更新しました",updateFailed:"エントリの更新に失敗しました",entryDeleted:"エントリを削除しました",deleteFailed:"エントリの削除に失敗しました",resetSuccess:"カタログをデフォルトにリセットしました",resetFailed:"カタログのリセットに失敗しました",exported:"{{count}}件のエントリをエクスポートしました",imported:"{{added}}件のエントリをインポートしました（{{skipped}}件スキップ）",importFailed:"インポートに失敗しました：無効なJSON形式",exportTooltip:"カタログをJSONにエクスポート",importTooltip:"JSONからカタログをインポート",resetTooltip:"デフォルトにリセット",selectedCount:"{{count}}件選択中",deleteSelected:"選択を削除",bulkDeleteConfirm:"{{count}}件のエントリーを削除してもよろしいですか？",bulkDeleted:"{{count}}件のエントリーを削除しました",bulkDeleteFailed:"エントリーの削除に失敗しました"},colorCatalog:{title:"カラーカタログ",description:"メーカー/素材別のフィラメントカラー。スプール追加時の自動カラー検索に使用されます。",searchColors:"カラーを検索...",allManufacturers:"すべてのメーカー",addNewColor:"新しいカラーを追加",manufacturer:"メーカー",colorName:"カラー名",hex:"Hex",materialOptional:"素材（任意）",showing:"{{total}}件中{{filtered}}件を表示",noMatch:"検索に一致するカラーがありません",empty:"カタログにカラーがありません",deleteColor:"カラーを削除",deleteConfirm:"「{{name}}」を削除してもよろしいですか？",resetCatalog:"カラーカタログをリセット",resetConfirm:"カタログをデフォルトにリセットしますか？カスタムカラーはすべて削除されます。",sync:"同期",starting:"開始中...",syncTooltip:"FilamentColors.xyzから同期（2000+カラー）",loadFailed:"カラーカタログの読み込みに失敗しました",fieldsRequired:"メーカー、カラー名、Hexカラーは必須です",colorAdded:"カラーを追加しました",addFailed:"カラーの追加に失敗しました",colorUpdated:"カラーを更新しました",updateFailed:"カラーの更新に失敗しました",colorDeleted:"カラーを削除しました",deleteFailed:"カラーの削除に失敗しました",resetSuccess:"カラーカタログをデフォルトにリセットしました",resetFailed:"カタログのリセットに失敗しました",syncUpToDate:"最新の状態です（{{count}}件のカラーを確認）",syncComplete:"{{added}}件の新しいカラーを追加しました（{{skipped}}件は既に存在）",syncError:"同期エラー",syncFailed:"FilamentColors.xyzからの同期に失敗しました",exported:"{{count}}件のカラーをエクスポートしました",imported:"{{added}}件のカラーをインポートしました（{{skipped}}件スキップ）",importFailed:"インポートに失敗しました：無効なJSON形式",selectedCount:"{{count}}件選択中",deleteSelected:"選択を削除",bulkDeleteConfirm:"{{count}}件のカラーを削除してもよろしいですか？",bulkDeleted:"{{count}}件のカラーを削除しました",bulkDeleteFailed:"カラーの削除に失敗しました"},dateFormat:"日付形式",dateFormatUs:"US (MM/DD/YYYY)",dateFormatEu:"EU (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"時刻形式",timeFormat12:"12時間制 (3:30 PM)",timeFormat24:"24時間制 (15:30)",defaultPrinter:"デフォルトプリンター",defaultPrinterDescription:"アップロード、再印刷、その他の操作でこのプリンターを事前選択します。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"サイドバーの項目をドラッグして並べ替え。ここでデフォルトの順序にリセット。",setDefault:"デフォルト設定",sidebarOrderSetDefaultHint:"デフォルト設定は、まだカスタマイズしていないユーザーに現在のメニュー順序を適用します。",sidebarDefaultSet:"デフォルトメニュー順序を設定しました。",sidebarDefaultCleared:"デフォルトメニュー順序をクリアしました。",sidebarDefaultFailed:"デフォルトメニュー順序の設定に失敗しました。",reset:"リセット",darkMode:"ダークモード",lightMode:"ライトモード",active:"(アクティブ)",background:"背景",accent:"アクセント",style:"スタイル",bgNeutral:"ニュートラル",bgWarm:"ウォーム",bgCool:"クール",bgOled:"OLEDブラック",bgSlate:"スレートブルー",bgForest:"フォレストグリーン",accentGreen:"グリーン",accentTeal:"ティール",accentBlue:"ブルー",accentOrange:"オレンジ",accentPurple:"パープル",accentRed:"レッド",styleClassic:"クラシック",styleGlow:"グロー",styleVibrant:"ビビッド",themeToggleHint:"サイドバーの太陽/月アイコンでダークモードとライトモードを切り替えます。",autoArchivePrints:"印刷を自動アーカイブ",autoArchiveDescription:"印刷完了時に3MFファイルを自動保存",saveThumbnailsDescription:"3MFファイルからプレビュー画像を抽出して保存",captureFinishPhotoDescription:"印刷完了時にプリンターカメラから写真を撮影",ffmpegNotInstalled:"ffmpegがインストールされていません",ffmpegRequired:"カメラ撮影にはffmpegが必要です。<brew>brew install ffmpeg</brew>（macOS）または<apt>apt install ffmpeg</apt>（Linux）でインストールしてください。",camera:"カメラ",cameraViewMode:"カメラ表示モード",cameraOverlayDescription:"メイン画面上にリサイズ可能なオーバーレイでカメラを表示",cameraWindowDescription:"別のブラウザウィンドウでカメラを表示",externalCamerasDescription:"内蔵プリンターカメラの代わりに外部カメラを設定。MJPEGストリーム、RTSP、HTTPスナップショット、USBカメラ（V4L2）をサポート。有効にすると、ライブビューと完了写真に外部カメラが使用されます。",cameraPlaceholderUsb:"デバイスパス (/dev/video0)",cameraPlaceholderUrl:"カメラURL (rtsp://... または http://...)",cameraTypeMjpeg:"MJPEGストリーム",cameraTypeRtsp:"RTSPストリーム",cameraTypeSnapshot:"HTTPスナップショット",cameraTypeUsb:"USBカメラ (V4L2)",cameraRotation:"回転",test:"テスト",connected:"接続済み",disconnected:"未接続",currency:"通貨",defaultFilamentCost:"デフォルトフィラメントコスト（kg単価）",electricityCost:"電気料金（kWh単価）",energyDisplayMode:"エネルギー表示モード",energyModePrintDescription:"ダッシュボードに印刷中の消費エネルギーの合計を表示",energyModeTotalDescription:"ダッシュボードにスマートプラグの累計エネルギーを表示",fileManager:"ファイルマネージャー",createArchiveEntry:"印刷時にアーカイブエントリを作成",createArchiveEntryDescription:"ファイルマネージャーから印刷時に、オプションでアーカイブエントリを作成",lowDiskSpaceWarning:"ディスク容量不足の警告",lowDiskSpaceDescription:"空きディスク容量がこのしきい値を下回った場合に警告を表示",printerFirmware:"プリンターファームウェア",checkFirmwareDescription:"Bambu Labのプリンターファームウェア更新を確認",bambuddySoftware:"Bambuddyソフトウェア",autoCheckDescription:"起動時に自動的に新しいバージョンを確認",checkNow:"今すぐ確認",updateAvailableVersion:"アップデート利用可能: v{{version}}",releaseNotes:"リリースノート",updateViaDocker:"Docker Composeでアップデート:",installUpdate:"アップデートをインストール",latestVersionRunning:"最新バージョンを使用しています",failedToCheckUpdates:"アップデートの確認に失敗しました: {{error}}",backupRestore:"バックアップと復元",backupRestoreDescription:"設定のエクスポート/インポートとGitHubバックアップの設定",goToBackup:"バックアップへ",externalUrl:"外部URL",externalUrlDescription:"Bambuddyがアクセス可能な外部URL。通知画像や外部連携に使用されます。",bambuddyUrl:"Bambuddy URL",externalUrlHint:"プロトコルとポートを含めてください（例: http://192.168.1.100:8000）",ftpRetry:"FTPリトライ",ftpRetryDescription:"プリンターのWi-Fiが不安定な場合にFTP操作をリトライ。3MFダウンロード、印刷アップロード、タイムラプスダウンロード、ファームウェア更新に適用。",autoRetryDescription:"失敗したFTP操作を自動的にリトライ",retryAttempts:"リトライ回数",retryDelay:"リトライ遅延",connectionTimeout:"接続タイムアウト",time_one:"{{count}}回",time_other:"{{count}}回",second_one:"{{count}}秒",second_other:"{{count}}秒",nSeconds:"{{count}}秒",increaseForWeakWifi:"Wi-Fiが弱いプリンター用に増やしてください",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Home Assistantに接続してHA REST API経由でスマートプラグを制御。switch、light、input_boolean、scriptエンティティをサポート。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"長期アクセストークン",haTokenHint:"HAでトークンを作成: プロフィール → 長期アクセストークン → トークンを作成",connectionSuccessful:"接続成功",connectionFailed:"接続失敗",haConnectionSuccess:"Home Assistantへの接続に成功しました。",haConnectionFailed:"Home Assistantへの接続に失敗しました。",mqttPublishing:"MQTTパブリッシュ",mqttDescription:"Node-RED、Home Assistant、その他の自動化システムとの統合のため、外部MQTTブローカーにBamBuddyイベントをパブリッシュ。",mqttEnableDescription:"外部MQTTブローカーにイベントをパブリッシュ",brokerHostname:"ブローカーホスト名",port:"ポート",usernameOptional:"ユーザー名（オプション）",passwordOptional:"パスワード（オプション）",topicPrefix:"トピックプレフィックス",topicPrefixHint:"トピック形式: {{prefix}}/printers/<serial>/status 等",prometheusMetrics:"Prometheusメトリクス",prometheusEndpointDescription:"Prometheus/Grafanaモニタリング用に<code>/api/v1/metrics</code>でプリンターメトリクスを公開。",bearerTokenOptional:"Bearerトークン（オプション）",bearerTokenHint:"設定時、リクエストに<code>Authorization: Bearer <token></code>が必要",metricsConnectionStatus:"接続状態",metricsPrinterState:"プリンター状態（idle/printing等）",metricsPrintProgress:"印刷進捗 0-100%",metricsBedTemp:"ベッド温度",metricsNozzleTemp:"ノズル温度",metricsPrintsTotal:"結果別の総印刷数",metricsMore:"...その他（レイヤー、ファン、キュー、フィラメント使用量）",smartPlugsDescription:"スマートプラグ（TasmotaまたはHome Assistant）を接続して、電源制御の自動化とプリンターのエネルギー使用量を追跡。",allOn:"すべてオン",allOff:"すべてオフ",addSmartPlug:"スマートプラグを追加",energySummary:"エネルギー概要",currentPower:"現在の消費電力",plugsOnline:"{{reachable}}/{{total}}プラグオンライン",today:"今日",yesterday:"昨日",total:"合計",enablePlugsForSummary:"プラグを有効にしてエネルギー概要を表示",addNotificationProvider:"追加",systemBadge:"(システム)",creating:"作成中...",changing:"変更中...",deleteUserAndItems:"ユーザーとそのアイテムを削除",deleteUserKeepItems:"ユーザーを削除、アイテムは保持（オーナーなしになります）",ok:"OK",twoFa:{totpTitle:"認証アプリ (TOTP)",totpDesc:"Google Authenticator、Aegis、Authyなどのアプリを使用します。",emailOtpTitle:"メールOTP",emailOtpDesc:"ログイン時に{{email}}にワンタイムコードを送信します。",emailOtpNoEmail:"この方法を有効にするには、アカウントにメールアドレスを追加してください。",addEmailFirst:"アカウントにメールアドレスがありません。管理者に追加を依頼してください。",setupTotp:"認証アプリを設定",setupAuthApp:"認証アプリを設定",setupInstructions:"認証アプリでQRコードをスキャンし、コードで確認してください。",manualEntry:"スキャンできない場合は、このシークレットを手動で入力してください:",scannedContinue:"コードをスキャンしました — 続ける",enterCodeToConfirm:"認証アプリの6桁のコードを入力して設定を確認してください。",activate:"有効化",disableTotp:"認証アプリを無効化",disableConfirmHint:"認証アプリを無効にするには、有効なTOTPコードまたはバックアップコードを入力してください。",totpDisabled:"認証アプリが無効化されました。",emailOtpEnabled:"メールOTPが有効化されました。",emailOtpDisabled:"メールOTPが無効化されました。",smtpRequired:"先にSMTP設定を構成してテストしてください。",invalidCode:"無効なコードです。もう一度お試しください。",enableEmailOtp:"メールOTPを有効化",disableEmailOtp:"メールOTPを無効化",emailSetupEnterCode:"確認コードがメールアドレスに送信されました。このメールボックスを所有していることを確認するために、以下に入力してください。",verifyAndEnable:"確認して有効化",emailDisablePasswordHint:"メールOTPの無効化を確認するには、アカウントのパスワードを入力してください。",passwordPlaceholder:"パスワードを入力してください",backupCodesTitle:"バックアップコードを保存",backupCodesWarning:"これらのコードを安全な場所に保存してください。各コードは一度しか使用できません。",backupCodesRemaining:"バックアップコード残り{{count}}個",savedCodes:"コードを保存しました",regenBackup:"バックアップコードを再生成",regenBackupHint:"現在のTOTPコードを入力して10個の新しいバックアップコードを生成します。",newBackupCodes:"新しいバックアップコード",linkedAccounts:"リンクされたSSOアカウント",linkedAccountsDesc:"これらの外部IDプロバイダーがあなたのアカウントにリンクされています。",oidcUnlinked:"アカウントのリンクを解除しました。"},oidc:{title:"SSO / OIDCプロバイダー",desc:"シングルサインオン用のOpenID Connectプロバイダーを設定します。",addProvider:"プロバイダーを追加",newProvider:"新しいプロバイダー",empty:"OIDCプロバイダーがまだ設定されていません。",created:"プロバイダーが作成されました。",updated:"プロバイダーが更新されました。",deleted:"プロバイダーが削除されました。",deleteTitle:"プロバイダーを削除",deleteMessage:'"{{name}}"を削除しますか？リンクされたすべてのユーザーアカウントが切断されます。',form:{name:"表示名",issuerUrl:"発行者URL",clientId:"クライアントID",clientSecret:"クライアントシークレット",scopes:"スコープ",iconUrl:"アイコンURL (任意)",enabled:"有効",autoCreate:"ユーザーを自動作成",autoCreateDesc:"初回ログイン時にローカルアカウントを自動的に作成します。",autoLink:"既存アカウントを自動リンク",autoLinkDesc:"初回ログイン時にメールアドレスで既存のローカルアカウントにリンクします。",secretHint:"空白のままで現在のものを維持",secretPlaceholder:"新しいシークレット",emailClaim:"メールクレーム",emailClaimDesc:"メールIDとして使用するJWTクレーム。Azure Entra IDには'preferred_username'または'upn'を使用（email_verifiedを送信しない）。信頼できるクレーム名のみ使用してください。",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"メール確認を要求",requireEmailVerifiedDesc:"プロバイダーが確認済みとしてマークした場合にのみメールクレームを受け入れます。",requireEmailVerifiedWarning:"警告：確認なしでメールが受け入れられます。信頼できるプロバイダーのみで使用してください。",requireEmailVerifiedAutoLink:"この設定を変更するには、まず自動リンクを無効にしてください。"}}},notification:{printStarted:{title:"印刷開始",body:"{{printer}}: {{filename}} の印刷を開始しました"},printCompleted:{title:"印刷完了",body:"{{printer}}: {{filename}} が正常に完了しました"},printFailed:{title:"印刷失敗",body:"{{printer}}: {{filename}} が失敗しました"},printStopped:{title:"印刷中止",body:"{{printer}}: {{filename}} が中止されました"},printProgress:{title:"印刷進捗",body:"{{printer}}: {{filename}} は {{percent}}% 完了"},printerOffline:{title:"プリンターオフライン",body:"{{printer}} がオフラインです"},printerError:{title:"プリンターエラー",body:"{{printer}}: {{error}}"},filamentLow:{title:"フィラメント残量低下",body:"{{printer}}: フィラメントが残りわずかです"},maintenanceDue:{title:"メンテナンス期限",body:"{{printer}}: {{items}} の対応が必要です"}},errors:{generic:"問題が発生しました",networkError:"ネットワークエラーです。接続を確認してください。",notFound:"見つかりません",unauthorized:"認証エラー",serverError:"サーバーエラー",validationError:"入力内容を確認してください",printerConnectionFailed:"プリンターへの接続に失敗しました",saveFailed:"保存に失敗しました",deleteFailed:"削除に失敗しました",loadFailed:"データの読み込みに失敗しました"},hmsErrors:{title:"エラー - {{name}}",noErrors:"エラーなし",viewOnWiki:"Bambu Lab Wikiで表示",clearInstructions:"プリンターでエラーをクリアするとここからも消えます。",clearErrors:"エラーをクリア",clearSuccess:"HMSエラーをクリアしました",clearFailed:"HMSエラーのクリアに失敗しました"},mqttDebug:{title:"MQTTデバッグログ",searchPlaceholder:"トピックまたはペイロードで検索...",noMessages:"まだメッセージが記録されていません",startLoggingHint:"「ログ開始」をクリックしてMQTTメッセージのキャプチャを開始",noMessagesMatch:"フィルターに一致するメッセージがありません",adjustFilterHint:"検索条件やフィルター条件を調整してみてください",incoming:"受信",outgoing:"送信",loggingStopped:"ログ記録停止",loggingActive:"ログ記録中 - メッセージは自動更新されます",startLogging:"ログ記録を開始",stopLogging:"ログ停止",clearLog:"ログをクリア",topic:"トピック",timestamp:"タイムスタンプ",direction:"方向",all:"すべて"},printerFiles:{title:"ファイル管理",storageUsed:"使用中:",storageFree:"空き:",filterPlaceholder:"ファイルを検索...",deleteButton:"削除",deleteFiles:"{{count}}件のファイルを削除",deleteFileConfirm:'"{{name}}" を削除しますか？この操作は取り消せません。',deleteFilesConfirm:"選択した{{count}}件のファイルを削除しますか？元に戻せません。",noFiles:"このディレクトリにファイルがありません",loadingFiles:"ファイルを読み込み中...",failedToLoad:"ファイルの読み込みに失敗しました",toast:{filesDeleted:"{{count}}件のファイルを削除しました",deleteFailed:"削除に失敗: {{error}}"}},confirm:{delete:"削除しますか？",unsavedChanges:"保存されていない変更があります。このページを離れますか？",clearQueue:"キューをクリアしますか？"},login:{title:"Bambuddy ログイン",subtitle:"アカウントにサインイン",username:"ユーザー名",usernamePlaceholder:"ユーザー名を入力",usernameOrEmail:"ユーザー名またはメール",usernameOrEmailPlaceholder:"ユーザー名または @ メール",password:"パスワード",passwordPlaceholder:"パスワードを入力",signIn:"サインイン",signingIn:"ログイン中...",rememberMe:"ログイン状態を保持する",forgotPassword:"パスワードをお忘れですか？",loginSuccess:"ログインしました",loginFailed:"ログインに失敗しました",enterCredentials:"ユーザー名とパスワードを入力してください",enterEmail:"メールアドレスを入力してください",oidcLoginFailed:"OIDCログインに失敗しました",oidcErrors:{providerError:"IDプロバイダーがエラーを返しました",missingParameters:"OIDCコールバックに必須パラメーターがありません",invalidState:"OIDCの状態が無効か、すでに使用されています",stateExpired:"OIDCログインセッションが期限切れです。もう一度お試しください",providerNotFound:"OIDCプロバイダーが見つかりません",discoveryFailed:"OIDCディスカバリードキュメントの取得に失敗しました",invalidDiscovery:"OIDCディスカバリードキュメントが無効です",networkError:"OIDCトークン交換中にネットワークエラーが発生しました",badResponse:"OIDCトークン交換中に予期しない応答を受信しました",noIdToken:"OIDCプロバイダーがIDトークンを返しませんでした",validationFailed:"OIDCトークンの検証に失敗しました",nonceMismatch:"OIDCノンスが一致しません。リプレイ攻撃の可能性があります",missingSubClaim:"OIDCトークンにsubクレームがありません",noLinkedAccount:"このOIDCアイデンティティに関連付けられたローカルアカウントがありません",accountInactive:"あなたのアカウントは無効です",userResolutionFailed:"アカウントを解決できませんでした",internalError:"OIDCログイン中に内部エラーが発生しました",tokenExchangeFailed:"OIDCトークン交換に失敗しました"},forgotPasswordTitle:"パスワードを忘れた場合",forgotPasswordMessage:"パスワードを忘れた場合は、システム管理者に連絡してリセットしてもらってください。",forgotPasswordEmailMessage:"メールアドレスを入力すると、新しいパスワードを送信します。",emailAddress:"メールアドレス",emailPlaceholder:"your.email@example.com",cancel:"キャンセル",sending:"送信中...",sendResetEmail:"リセットメールを送信",howToReset:"パスワードのリセット方法：",resetStep1:"Bambuddy管理者に連絡",resetStep2:"ユーザー管理でパスワードリセットを依頼",resetStep3:"管理者が新しい仮パスワードを設定",resetStep4:"新しいパスワードでログインし、設定で変更",gotIt:"了解",twoFA:{title:"二段階認証",subtitle:"アカウントは二段階認証で保護されています。確認コードを入力してください。",methodAuthenticator:"認証アプリ",methodEmail:"メール認証",methodBackup:"バックアップコード",instructionsTotp:"認証アプリを開いて、Bambuddy用の6桁のコードを入力してください。",instructionsEmail:"6桁の確認コードをメールアドレスに送信しました。有効期限は10分です。",instructionsEmailNotSent:"下のボタンをクリックして、メールで確認コードを受け取ってください。",instructionsBackup:"8文字のバックアップコードをいずれか1つ入力してください。各コードは1回のみ使用可能です。",sendCodeButton:"メールでコードを送信する",sendingCode:"送信中...",resendCode:"コードを再送する",codeLabel:"確認コード",backupCodeLabel:"バックアップコード",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"確認する",verifyingButton:"確認中...",backToLogin:"← ログイン画面に戻る",orContinueWith:"または以下でログイン",signInWith:"{{provider}}でログイン",enterCode:"確認コードを入力してください",sendCodeFailed:"確認コードの送信に失敗しました",invalidCode:"無効なコードです。もう一度お試しください。"},resetPassword:{title:"新しいパスワードを設定",subtitle:"下のフィールドに新しいパスワードを入力して確認してください。",newPassword:"新しいパスワード",newPasswordPlaceholder:"8文字以上",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"新しいパスワードを再入力",saving:"保存中…",submit:"新しいパスワードを設定",backToLogin:"ログインに戻る",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは8文字以上で入力してください",resetFailed:"パスワードのリセットに失敗しました。リンクが期限切れの可能性があります。"}},setup:{title:"Bambuddy セットアップ",subtitle:"Bambuddyインスタンスの認証を設定",enableAuth:"認証を有効化",adminAccount:"管理者アカウント",adminAccountDesc:"既に管理者ユーザーが存在する場合、既存の管理者アカウントを使用して認証が有効化されます。既存の管理者を使用する場合は下のフィールドを空のままにするか、新しい認証情報を入力して新しい管理者ユーザーを作成してください。",adminUsername:"管理者ユーザー名",adminPassword:"管理者パスワード",optionalIfAdminExists:"（管理者ユーザーが存在する場合は任意）",adminUsernamePlaceholder:"管理者ユーザー名を入力（任意）",adminPasswordPlaceholder:"管理者パスワードを入力（任意）",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"パスワードを確認",settingUp:"セットアップ中...",completeSetup:"セットアップを完了",toast:{authEnabledAdminCreated:"認証が有効になり、管理者ユーザーが作成されました",authEnabledExistingAdmins:"既存の管理者ユーザーを使用して認証が有効になりました",setupCompleted:"セットアップが完了しました",enterBothCredentials:"管理者のユーザー名とパスワードの両方を入力するか、既存の管理者を使用する場合は両方を空にしてください",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です"}},changePassword:{title:"パスワードを変更",currentPassword:"現在のパスワード",currentPasswordPlaceholder:"現在のパスワードを入力",newPassword:"新しいパスワード",newPasswordPlaceholder:"新しいパスワードを入力（6文字以上）",confirmPassword:"新しいパスワード確認",confirmPasswordPlaceholder:"パスワードを確認",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です",changing:"変更中...",success:"パスワードを変更しました",failed:"パスワードの変更に失敗しました"},plateAlert:{title:"印刷が一時停止されました！",message:"ビルドプレート上にオブジェクトが検出されました。印刷が自動的に一時停止されました。プレートをクリアして印刷を再開してください。",understand:"了解"},camera:{title:"カメラビュー",invalidPrinterId:"無効なプリンターID",live:"ライブ",snapshot:"スナップショット",restartStream:"ストリームを再開",refreshSnapshot:"スナップショットを更新",fullscreen:"フルスクリーン",exitFullscreen:"フルスクリーンを終了",connectingToCamera:"カメラに接続中...",capturingSnapshot:"スナップショットを撮影中...",connectionLost:"接続が切断されました",connectionFailed:"カメラ接続に失敗しました",reconnecting:"{{countdown}}秒後に再接続... (試行 {{attempt}}/{{max}})",reconnectNow:"今すぐ再接続",cameraUnavailable:"カメラが利用できません",cameraUnavailableDesc:"プリンターの電源がオンで接続されていることを確認してください。",noCamera:"カメラがありません",retry:"再試行",cameraStream:"カメラストリーム",zoomOut:"ズームアウト",zoomIn:"ズームイン",resetZoom:"ズームをリセット",recording:"録画中",startRecording:"録画開始",stopRecording:"録画停止",chamberLight:"チャンバーライト切替"},groups:{title:"グループ管理",subtitle:"アクセス制御の権限グループを管理",backToSettings:"設定に戻る",createGroup:"グループを作成",noPermission:"このページにアクセスする権限がありません。",system:"システム",noDescription:"説明なし",usersCount:"{{count}}人のユーザー",permissionsCount:"{{count}}個の権限",edit:"編集",delete:"削除",toast:{created:"グループを作成しました",updated:"グループを更新しました",deleted:"アーカイブを削除しました",enterGroupName:"グループ名を入力"},modal:{editGroup:"グループを編集",createGroup:"グループを作成",cancel:"キャンセル",saving:"保存中...",creating:"作成中...",saveChanges:"変更を保存"},form:{groupName:"グループ名",groupNamePlaceholder:"グループ名を入力",systemGroupWarning:"システムグループ名は変更できません",description:"説明",descriptionPlaceholder:"説明を入力（任意）",permissions:"権限 ({{count}} 選択中)"},deleteModal:{title:"グループを削除",message:"このグループを削除しますか？このグループのユーザーはこれらの権限を失います。",confirm:"確認"},editor:{title:"グループを編集",createTitle:"グループを作成",search:"権限を検索...",selectAll:"すべて選択",clearAll:"すべて解除",permissionsSelected:"{{count}}件選択",noResults:"検索に一致する権限がありません"}},users:{title:"ユーザー管理",subtitle:"ユーザーとBambuddyインスタンスへのアクセスを管理",backToSettings:"設定に戻る",createUser:"ユーザーを作成",noPermission:"このページにアクセスする権限がありません。",admin:"管理者",noGroups:"グループなし",active:"アクティブ",inactive:"非アクティブ",edit:"編集",delete:"削除",system:"システム",noGroupsAvailable:"利用可能なグループがありません",table:{username:"ユーザー名",groups:"グループ",status:"ステータス",actions:"アクション"},toast:{created:"ユーザーを作成しました",updated:"ユーザーを更新しました",deleted:"アーカイブを削除しました",fillRequired:"必須項目をすべて入力してください",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です"},modal:{createUser:"ユーザーを作成",editUser:"ユーザーを編集",cancel:"キャンセル",creating:"作成中...",saving:"保存中...",saveChanges:"変更を保存",advancedAuthSubtitle:"高度な認証を使用"},form:{username:"ユーザー名",usernamePlaceholder:"ユーザー名を入力",email:"メール",emailPlaceholder:"user@example.com",password:"パスワード",passwordPlaceholder:"パスワードを入力",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"パスワードを確認",newPasswordPlaceholder:"新しいパスワードを入力",confirmNewPasswordPlaceholder:"新しいパスワードを確認",leaveBlankToKeep:"（現在のパスワードを維持する場合は空白）",groups:"グループ",optional:"オプション",autoGeneratedPassword:"安全なパスワードが自動的に生成され、ユーザーにメールで送信されます。",passwordManagedByAdvancedAuth:"パスワードは高度な認証によって管理されています。「パスワードのリセット」を使用して、メールで新しいパスワードをユーザーに送信してください。",resetPassword:"パスワードのリセット",resettingPassword:"パスワードをリセット中..."},deleteModal:{title:"ユーザーを削除",message:"このユーザーを削除してもよろしいですか？この操作は元に戻せません。",confirm:"ユーザーを削除"}},streamOverlay:{title:"ストリームオーバーレイ",invalidPrinterId:"無効なプリンターID",cameraStream:"カメラストリーム",progress:"進捗",eta:"残り時間",printerIdle:"プリンター待機中",printerOffline:"プリンターオフライン",status:{printing:"印刷中",paused:"一時停止",finished:"完了",failed:"失敗",idle:"待機中",unknown:"不明"}},profiles:{title:"フィラメントプロファイル",subtitle:"スライサープリセットと圧力キャリブレーションの管理",tabs:{cloud:"クラウドプロファイル",local:"ローカルプロファイル",kprofiles:"Kプロファイル"},localProfiles:{title:"ローカルプロファイル",subtitle:"OrcaSlicerからスライサープリセットをインポート・管理",import:"プロファイルをインポート",importDesc:".bbscfg、.bbsflmt、.orca_filament、.zip、.jsonファイルをここにドロップ",importing:"インポート中...",search:"ローカルプリセットを検索...",noPresets:"ローカルプリセットがまだありません",badge:"ローカル",edit:"編集",delete:"削除",cancel:"キャンセル",deleteConfirmTitle:"プリセットを削除",deleteConfirm:"このプリセットを削除してもよろしいですか？元に戻せません。",source:"ソース",inheritsFrom:"継承元",filamentType:"タイプ",vendor:"メーカー",compatiblePrinters:"プリンター",nozzleTemp:"ノズル温度",cost:"コスト",density:"密度",pressureAdvance:"プレッシャーアドバンス",filament:"フィラメント",process:"プロセス",printer:"プリンター",toast:{importSuccess:"{{count}}件のプリセットをインポートしました",importSkipped:"{{count}}件のプリセットをスキップしました（重複）",importError:"インポート中に{{count}}件のエラーが発生しました",deleted:"プリセットを削除しました",updated:"プリセットを更新しました"}},connectedAs:"接続中:",logout:"ログアウト",noLogoutPermission:"ログアウトする権限がありません",failedToLoad:"ファイルの読み込みに失敗しました",retry:"リトライ",time:{justNow:"たった今",minsAgo:"{{count}}分前",hoursAgo:"{{count}}時間前",daysAgo:"{{count}}日前"},toast:{loggedOut:"ログアウトしました"},login:{title:"Bambuddy ログイン",subtitle:"アカウントにサインイン",email:"メールアドレス",password:"パスワード",region:"リージョン",regionGlobal:"グローバル",regionChina:"中国",verificationCode:"認証コード",totpCode:"認証アプリコード",checkEmail:"メール ({{email}}) に届いた6桁のコードを入力してください",enterTotpHint:"認証アプリの6桁のコードを入力してください",accessToken:"アクセストークン",accessTokenHint:"Bambu Labのアクセストークンを貼り付け（Bambu Studioから取得）",back:"戻る",loginButton:"ログイン",verifyButton:"認証",setTokenButton:"トークンを設定",useToken:"アクセストークンを使用",useEmail:"メールでログイン",toast:{loggedIn:"ログインしました",codeSent:"メールに認証コードを送信しました",enterTotp:"認証アプリのコードを入力してください",tokenSet:"トークンを設定しました"}},presets:{myPreset:"マイプリセット（編集可能）",duplicate:"複製",editable:"編集可能",failedToLoadDetails:"プリセットの詳細を読み込めませんでした",deleteConfirm:"このプロファイルを削除しますか？",deleteWarning:"「{{name}}」をBambu Cloudから完全に削除します。元に戻せません。",noDuplicatePermission:"プリセットを複製する権限がありません",noEditPermission:"プリセットを編集する権限がありません",noDeletePermission:"プロジェクトを削除する権限がありません",types:{filament:"フィラメント",printer:"プリンター",process:"プロセス"},toast:{deleted:"アーカイブを削除しました",created:"プリセットを作成しました",updated:"プリセットを更新しました",duplicated:"プリセットを複製しました",fieldAdded:'フィールド "{{key}}" を追加しました',exported:"プリセットをエクスポートしました"},baseLabel:"ベース: {{name}}",currentLabel:"現在: {{name}}",newPreset:"新規プリセット",editPreset:"プリセットを編集",duplicatePreset:"プリセットを複製",createNewPreset:"新しいプリセットを作成",customizeSettings:"新しいプリセットの設定をカスタマイズ",compareWithBase:"ベースプリセットと比較",compare:"比較",basePreset:"ベースプリセット",selectBasePreset:"ベースプリセットを選択...",presetName:"プリセット名",myCustomPreset:"カスタムプリセット",inheritsFrom:"継承元:",dropJsonToImport:"JSONファイルをドロップしてインポート",tabs:{common:"一般",allFields:"すべてのフィールド"},availableFields:"利用可能なフィールド",searchFieldsPlaceholder:"フィールドを検索...",noMatchingFields:"一致するフィールドがありません",allFieldsAdded:"すべてのフィールドが追加済みです",addCustomField:"カスタムフィールドを追加",yourOverrides:"オーバーライド一覧",noOverridesYet:"オーバーライドはまだありません",clickFieldsToAdd:"左のフィールドをクリックして追加",saveAsTemplate:"テンプレートとして保存",jsonTip:"ヒント: .jsonファイルをこのモーダルにドラッグ＆ドロップして設定をインポート"},cloudView:{searchPlaceholder:"プリセットを検索...",templates:"テンプレート",refresh:"更新",newPreset:"新規プリセット",clearFilters:"フィルターをクリア",compareMode:"比較モード",selectAnotherPreset:"同じタイプ（{{type}}）の別のプリセットを選択",clickTwoPresets:"同じタイプのプリセットを2つクリックして比較",selectFirst:"1. 最初を選択",selectSecond:"2. 2番目を選択",compareNow:"比較を実行",lastSynced:"最終同期:",showingCount:"{{total}} 件中 {{showing}} 件のプリセットを表示",noPresetsFound:"プリセットが見つかりません",columns:{filament:"フィラメント",process:"プロセス",printer:"プリンター"},noFilamentPresets:"フィラメントプリセットなし",noProcessPresets:"プロセスプリセットなし",noPrinterPresets:"プリンタープリセットなし",filters:{type:"種類",owner:"所有者",printer:"プリンター",nozzle:"ノズル",filament:"フィラメント",layer:"レイヤー",all:"すべて",myPresets:"マイプリセット",builtIn:"ビルトイン",process:"プロセス"},noTemplatesPermission:"テンプレートを管理する権限がありません",noRefreshPermission:"プロファイルを更新する権限がありません",noCreatePermission:"プロジェクトを作成する権限がありません"},templates:{title:"フィラメントプロファイル",noTemplates:"テンプレートがありません。バックエンドを再起動してデフォルトテンプレートを作成してください。",createFirst:"プリセットエディタからテンプレートを作成",typeFilter:"タイプ:",deleteTitle:"テンプレートを削除",deleteWarning:"この操作は元に戻せません",deleteConfirm:'"{{name}}" を削除しますか？',namePlaceholder:"テンプレート名",descriptionPlaceholder:"説明",settingsJson:"設定 (JSON)",fieldsCount:"{{count}}フィールド",shownInModals:"モーダルに表示",hiddenInModals:"モーダルで非表示",apply:"適用",toast:{deleted:"アーカイブを削除しました",updated:"テンプレートを更新しました",created:"テンプレートを作成しました",applied:"テンプレートを適用しました"}}},support:{debugLoggingActive:"デバッグログが有効です",manageLogs:"管理",collectItem7:"プリンター接続状態とファームウェアバージョン",collectItem8:"連携状態（Spoolman、MQTT、HA）",collectItem9:"ネットワークインターフェース（サブネットのみ）",collectItem10:"Pythonパッケージバージョン",collectItem11:"データベース健全性チェック",collectItem12:"Docker環境の詳細"},fileManager:{title:"ファイル管理",subtitle:"印刷ファイルの整理と管理",uploadFiles:"ファイルをアップロード",newFolder:"新しいフォルダ",folderName:"フォルダ名",folderNamePlaceholder:"例: 機能パーツ",renameFile:"ファイル名を変更",renameFolder:"フォルダ名を変更",moveFiles:"{{count}}件のファイルを移動",rootNoFolder:"ルート（フォルダなし）",current:"（現在）",linkFolder:"フォルダをリンク",linkFolderDescription:"「{{name}}」をプロジェクトまたはアーカイブにリンクしてすばやくアクセス。",project:"プロジェクト",archive:"アーカイブ",noProjectsFound:"プロジェクトが見つかりません",noArchivesFound:"アーカイブが見つかりません",unlink:"リンク解除",link:"リンク",dragDropFiles:"ファイルをここにドラッグ＆ドロップ",dropFilesHere:"ここにファイルをドロップ",orClickToBrowse:"またはクリックして選択",allFileTypesSupported:"すべてのファイルタイプに対応。ZIPファイルは展開されます。",zipFilesDetected:"ZIPファイルを検出",zipExtractOptions:"ZIPファイルは展開されます。フォルダー構造の処理方法を選択：",preserveZipStructure:"ZIPのフォルダ構造を保持",createFolderFromZip:"ZIPファイル名からフォルダーを作成",stlThumbnailGeneration:"STLサムネイル生成",zipMayContainStl:"ZIPファイルにSTLファイルが含まれている場合があります。展開時にサムネイルを生成できます。",thumbnailsCanBeGenerated:"STLファイルのサムネイルを生成できます。大きなモデルは処理に時間がかかる場合があります。",generateThumbnailsForStl:"STLファイルのサムネイルを生成",threemfDetected:"3MFファイルを検出",threemfExtractionInfo:"プリンターモデル、素材、色、印刷設定は3MFファイルから自動的に抽出されます。",willBeExtracted:"• 展開予定",filesExtracted:"• {{count}}個のファイルを展開済み",uploadComplete:"アップロード完了: {{succeeded}} 件成功",uploadFailed:"アップロード失敗",zipFilesFailed:"{{count}}個のファイルが失敗",uploading:"アップロード中...",changeLink:"リンクを変更...",linkTo:"リンク先...",linkToProjectOrArchive:"プロジェクトまたはアーカイブにリンク",addToQueue:"キューに追加",schedulePrint:"印刷をスケジュール",generateThumbnail:"サムネイルを生成",generateThumbnails:"サムネイルを生成",generateThumbnailsForMissing:"サムネイルのないSTLファイルのサムネイルを生成",gridView:"グリッド表示",listView:"リスト表示",lowDiskSpaceWarning:"ディスク容量不足の警告",lowDiskSpaceDetails:"{{total}}中{{free}}の空き容量のみ。しきい値は設定で{{threshold}}GBに設定されています。",files:"ファイル",folders:"フォルダ",size:"サイズ",free:"空き:",allFiles:"すべてのファイル",wrap:"折り返し",enableTextWrapping:"テキスト折り返しを有効化",disableTextWrapping:"テキスト折り返しを無効化",collapse:"折りたたむ",collapseFoldersByDefault:"フォルダをデフォルトで折りたたむ",expandFoldersByDefault:"フォルダをデフォルトで展開する",dragToResizeTooltip:"ドラッグしてリサイズ、ダブルクリックでリセット",searchFiles:"ファイルを検索...",allTypes:"すべての種類",prints:"印刷回数",ascending:"昇順",descending:"降順",resultsCount:"{{total}}件中{{showing}}件",selectAll:"すべて選択",deselectAll:"すべて選択解除",selected:"{{count}}件選択中",adding:"追加中...",loadingFiles:"ファイルを読み込み中...",folderIsEmpty:"フォルダーは空です",noFilesYet:"ファイルはまだありません",folderEmptyDescription:"ファイルをアップロードするか、このフォルダーにファイルを移動して開始しましょう。",noFilesDescription:"印刷関連ファイルの整理を始めるにはファイルをアップロードしてください。",noMatchingFiles:"一致するファイルがありません",noMatchingFilesDescription:"現在の検索またはフィルター条件に一致するファイルがありません。",clearFilters:"フィルターをクリア",printedCount:"{{count}}回印刷済み",uploadedBy:"アップロード者",deleteFolder:"フォルダを削除",deleteFile:"ファイルを削除",deleteFilesCount:"{{count}}件のファイルを削除",deleteFolderConfirm:"このフォルダを削除しますか？中のファイルもすべて削除されます。",deleteFileConfirm:"このファイルを削除しますか？",deleteFilesConfirm:"選択した{{count}}件のファイルを削除しますか？この操作は元に戻せません。",deleting:"削除中...",noPermissionRenameFolder:"フォルダー名を変更する権限がありません",noPermissionLinkFolder:"フォルダーをリンクする権限がありません",noPermissionDeleteFolder:"フォルダーを削除する権限がありません",noPermissionPrint:"印刷する権限がありません",noPermissionSlice:"You do not have permission to slice files",noPermissionAddToQueue:"キューに追加する権限がありません",noPermissionDownload:"ファイルをダウンロードする権限がありません",noPermissionRenameFile:"このファイル名を変更する権限がありません",noPermissionGenerateThumbnail:"サムネイルを生成する権限がありません",noPermissionDeleteFile:"このファイルを削除する権限がありません",noPermissionCreateFolder:"フォルダーを作成する権限がありません",noPermissionUpload:"ファイルをアップロードする権限がありません",noPermissionMoveFiles:"ファイルを移動する権限がありません",noPermissionDeleteFiles:"ファイルを削除する権限がありません",linkExternal:"外部リンク",linkExternalFolder:"外部フォルダをリンク",linkExternalFolderDescription:"ホストディレクトリ（NAS、USB、ネットワーク共有）をファイルマネージャにマウントします。ファイルはコピーされず、元のパスから直接アクセスされます。",externalFolderNamePlaceholder:"例：NASプリント",externalPath:"ホストパス",externalPathHelp:"Dockerホスト上のディレクトリの絶対パス。コンテナにバインドマウントされている必要があります。",readOnly:"読み取り専用",readOnlyHelp:"アップロードと削除を防止",showHiddenFiles:"隠しファイルを表示（ドットファイル）",externalFolder:"外部フォルダ",scanFolder:"スキャン",toast:{folderCreated:"フォルダを作成しました",folderDeleted:"フォルダを削除しました",fileDeleted:"ファイルを削除しました",filesDeleted:"{{count}}件のファイルを削除しました",filesMoved:"ファイルを移動しました",folderLinked:"フォルダをリンクしました",folderUnlinked:"フォルダのリンクを解除しました",externalFolderLinked:"外部フォルダがリンクされスキャンされました",folderScanned:"スキャン完了：{{added}}件追加、{{removed}}件削除",addedToQueue:"{{count}}個のファイルをキューに追加しました",addedToQueuePartial:"{{added}}件追加、{{failed}}件失敗",failedToAddToQueue:"ファイルの追加に失敗: {{error}}",fileRenamed:"ファイル名を変更しました",folderRenamed:"フォルダ名を変更しました",thumbnailsGenerated:"{{count}}件のサムネイルを生成しました",thumbnailsGeneratedPartial:"{{succeeded}}件生成、{{failed}}件失敗",noStlMissingThumbnails:"サムネイルのないSTLファイルはありません",failedToGenerateThumbnails:"サムネイルの生成に失敗: {{error}}",thumbnailGenerated:"サムネイルを生成しました",failedToGenerateThumbnail:"サムネイルの生成に失敗: {{error}}"}},projects:{title:"プロジェクト",subtitle:"印刷プロジェクトを管理",newProject:"新規プロジェクト",editProject:"プロジェクトを編集",deleteProject:"プロジェクトを削除",projectName:"プロジェクト名",description:"説明",noProjects:"プロジェクトはまだありません",noProjectsFiltered:"{{status}}のプロジェクトはありません",noProjectsFilteredHelp:"{{status}}のプロジェクトがありません。ステータスが変更されるとここに表示されます。",createFirst:"最初のプロジェクトを作成して、関連する印刷の整理、進捗管理、ビルドの管理を始めましょう。",createFirstButton:"最初のプロジェクトを作成",create:"作成",files:"ファイル",prints:"印刷",plates:"プレート",parts:"パーツ",lastModified:"最終更新日",deleteConfirm:"このプロジェクトを削除しますか？アーカイブとキューアイテムはリンク解除されますが、削除されません。",addFiles:"ファイルを追加",removeFile:"ファイルを削除",viewDetails:"詳細を表示",namePlaceholder:"プロジェクト名",descriptionPlaceholder:"プロジェクトの説明（任意）",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URLはhttp://またはhttps://で始まる必要があります",openExternalUrl:"プロジェクトのURLを開く",coverImageLabel:"カバー画像",coverImageAlt:"プロジェクトのカバー画像",coverImageUpload:"アップロード",coverImageReplace:"置き換える",coverImageRemove:"削除",color:"色",targetPlates:"目標プレート数",targetPlatesPlaceholder:"例: 10",targetPlatesHelp:"印刷ジョブの数",targetParts:"目標パーツ数",targetPartsPlaceholder:"例: 50",targetPartsHelp:"必要なオブジェクトの総数",tagsLabel:"タグ（カンマ区切り）",tagsPlaceholder:"カンマ区切りのタグ",dueDate:"期限",priority:"優先度",priorityLow:"低",priorityNormal:"通常",priorityHigh:"高",priorityUrgent:"緊急",statusActive:"進行中",statusCompleted:"完了",statusArchived:"アーカイブ済み",done:"完了",completed:"完了",failed:"失敗",inQueue:"キュー内",noPrintsYet:"印刷履歴なし",printJobs:"印刷ジョブ",partsPrinted:"印刷済みパーツ",failedParts:"失敗パーツ",import:"インポート",export:"エクスポート",importProject:"プロジェクトをインポート",exportAll:"すべてのプロジェクトをエクスポート",loading:"プロジェクトを読み込み中...",noEditPermission:"プロジェクトを編集する権限がありません",noDeletePermission:"プロジェクトを削除する権限がありません",noCreatePermission:"プロジェクトを作成する権限がありません",noImportPermission:"プロジェクトをインポートする権限がありません",noExportPermission:"プロジェクトをエクスポートする権限がありません",toast:{created:"プロジェクトを作成しました",updated:"プロジェクトを更新しました",deleted:"アーカイブを削除しました",imported:"プロジェクトをインポートしました",multipleImported:"{{count}}件のプロジェクトをインポートしました",importFailed:"インポートに失敗しました",exported:"プロジェクトをエクスポートしました（メタデータのみ）"}},projectDetail:{notFound:"見つかりません",backToProjects:"プロジェクト一覧に戻る",export:"エクスポート",exportProject:"プロジェクトをエクスポート",noExportPermission:"プロジェクトをエクスポートする権限がありません",noEditPermission:"このプロジェクトを編集する権限がありません",partOf:"所属先",priorityLabel:"優先度",noPrints:"このプロジェクトにはまだ印刷がありません",status:{active:"進行中",completed:"完了",archived:"アーカイブ済み"},priority:{low:"低",normal:"通常",high:"高",urgent:"緊急"},dueDate:{overdue:"期限超過",today:"今日が期限",daysLeft:"残り{{count}}日"},progress:{platesProgress:"プレート進捗",partsProgress:"パーツ進捗",printJobs:"印刷ジョブ",parts:"パーツ",percentComplete:"{{percent}}% 完了",remaining:"残り {{count}} 件"},stats:{printJobs:"印刷ジョブ",total:"合計",failed:"失敗 {{count}} 件",partsPrinted:"印刷済みパーツ {{count}} 件",printTime:"印刷時間",filamentUsed:"フィラメント使用量"},cost:{title:"コスト追跡",filamentCost:"フィラメント",energy:"エネルギー",totalCost:"合計コスト",total:"合計",includesBom:"BOM含む",budget:"予算",remaining:"残り"},subProjects:{title:"サブプロジェクト ({{count}})"},notes:{title:"メモ",noEditPermission:"このプロジェクトを編集する権限がありません",placeholder:"このプロジェクトについてメモを追加...",empty:"<空>"},files:{title:"ファイル",linkFolders:"ファイルマネージャーからフォルダーをリンク",forQuickAccess:"してクイックアクセスできるようにします。",fileCount:"{{count}}ファイル",empty:"<空>",noFiles:"このフォルダにファイルはありません。",print:"今すぐ印刷",addToQueue:"キューに追加"},bom:{title:"部品表",acquired:"{{completed}}/{{total}} 取得済み",showAll:"すべて表示",hideDone:"完了を非表示",addPart:"パーツを追加",noAddPermission:"パーツを追加する権限がありません",partNamePlaceholder:"パーツ名",partName:"パーツ名",qty:"数量",price:"価格 ({{currency}})",sourcingUrlPlaceholder:"URL（任意）",remarksPlaceholder:"備考",deletePart:"パーツを削除",deleteConfirm:"「{{name}}」を削除しますか？",noUpdatePermission:"パーツを更新する権限がありません",noEditPermission:"このプロジェクトを編集する権限がありません",noDeletePermission:"プロジェクトを削除する権限がありません",totalCost:"合計コスト",empty:"<空>"},timeline:{title:"アクティビティタイムライン",empty:"<空>"},template:{saveAsTemplate:"テンプレートとして保存",noCreatePermission:"プロジェクトを作成する権限がありません"},queue:{title:"印刷キュー",viewAll:"すべて表示",printing:"印刷中 {{count}} 件",queued:"キュー内 {{count}} 件"},prints:{title:"印刷 ({{count}})"},toast:{projectUpdated:"プロジェクトを更新しました",partAdded:"パーツを追加しました",partRemoved:"パーツを削除しました",exportFailed:"エクスポートに失敗しました",projectExported:"プロジェクトがエクスポートされました",templateCreated:"プロジェクトからテンプレートを作成しました"}},system:{title:"システム情報",version:"バージョン",uptime:"稼働時間",cpuUsage:"CPU使用率",memoryUsage:"メモリ使用量",diskUsage:"ディスク使用量",networkInfo:"ネットワーク情報",logs:"ログ",debugMode:"デバッグモード",enableDebug:"デバッグログを有効化",disableDebug:"デバッグログを無効化",downloadLogs:"ログをダウンロード",clearLogs:"通知ログを削除",dockerInfo:"Docker情報",containerName:"コンテナ名",imageName:"イメージ名",platform:"プラットフォーム",architecture:"アーキテクチャ"},library:{title:"フィラメントライブラリ",addFilament:"フィラメントを追加",editFilament:"フィラメントを編集",deleteFilament:"フィラメントを削除",vendor:"メーカー",material:"素材",color:"色",kFactor:"K値",temperature:"温度",noFilaments:"ライブラリにフィラメントがありません",deleteConfirm:"このフィラメントを削除しますか？",importFromPrinter:"プリンターからインポート",exportToFile:"ファイルにエクスポート"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Spoolman連携",enabled:"Spoolman有効",url:"Spoolman URL",connected:"接続中",disconnected:"未接続",testConnection:"接続テスト",sync:"同期",syncing:"同期中...",lastSync:"最終同期",linkToSpoolman:"Spoolmanに連携",openInSpoolman:"Spoolmanで開く",unlinkSpool:"スプールのリンクを解除",unlinkConfirmTitle:"スプールのリンクを解除しますか?",unlinkConfirmMessage:"これにより、スプールがSpoolmanから切断されます。Spoolman内のスプールデータは変更されません。",selectSpool:"スプールを選択",noUnlinkedSpools:"Spoolmanに未連携のスプールが見つかりません。",linkSuccess:"スプールをSpoolmanにリンクしました",linkFailed:"スプールのリンクに失敗しました",unlinkSuccess:"スプールをSpoolmanから解除しました",unlinkFailed:"スプールのリンク解除に失敗しました",spoolId:"スプールID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"残り",disableWeightSync:"AMS推定重量同期を無効化",disableWeightSyncDesc:"AMS推定値から残量を更新しません。AMSの割合ベースの推定よりもSpoolmanの使用量追跡を優先する場合に使用してください。新しいスプールは引き続きAMS推定値を初期重量として使用します。",reportPartialUsage:"失敗した印刷の部分使用量を報告",reportPartialUsageDesc:"印刷が失敗またはキャンセルされた場合、レイヤー進捗に基づいてその時点までの推定フィラメント使用量を報告します。"},inventory:{title:"スプール在庫管理",spoolmanMixedContentTitle:"Spoolman を HTTPS で読み込めません — ブラウザが混在コンテンツをブロックしています",spoolmanMixedContentBody:"Bambuddy はリバースプロキシ経由で HTTPS 配信されていますが、Spoolman の URL は HTTP のままです。ブラウザはセキュリティ上の理由で混在コンテンツをブロックするため、埋め込みの Spoolman UI を表示できません。Spoolman も HTTPS でアクセスできる必要があります。",spoolmanMixedContentFixReverseProxy:"Spoolman を Bambuddy と同じリバースプロキシ（Traefik / Nginx / Caddy）の後ろに HTTPS で配置し、設定で Spoolman URL を新しい HTTPS アドレスに更新してください。",spoolmanMixedContentFixOpenNewTab:"回避策として Spoolman を新しいタブで HTTP として開くことができます — 混在コンテンツのルールは埋め込みフレームのみに適用され、独立したタブは問題なく動作します。",spoolmanOpenInNewTab:"Spoolman を新しいタブで開く",addSpool:"スプールを追加",editSpool:"スプールを編集",material:"素材",selectMaterial:"素材を選択...",subtype:"サブタイプ",brand:"ブランド",searchBrand:"ブランドを検索...",useCustomBrand:"「{{brand}}」を使用",useCustomMaterial:"カスタム素材を使用: {{material}}",colorName:"色名",colorNamePlaceholder:"Jade White, Fire Red...",color:"色",hexColor:"HEXカラー",pickColor:"カスタムカラーを選択",labelWeight:"表示重量",coreWeight:"空スプール重量",searchSpoolWeight:"スプール重量を検索...",weightUsed:"使用量",currentWeight:"残量",measuredWeight:"計測重量",spoolName:"スプール",costPerKg:"kgあたりのコスト",measuredWeightError:"計測重量は{{min}}gから{{max}}gの間で入力してください。",slicerFilament:"スライサーフィラメント",slicerFilamentName:"スライサープリセット名",slicerPreset:"スライサープリセット",searchPresets:"フィラメントプリセットを検索...",selectedPreset:"選択済み",noPresetsFound:"プリセットが見つかりません",tempOverrides:"温度オーバーライド",note:"メモ",notePlaceholder:"このスプールに関する追加メモ...",category:"カテゴリ",categoryPlaceholder:"例：本番、試作、クライアントA",categoryNone:"カテゴリなし",lowStockThresholdOverride:"在庫低下のしきい値（このスプール）",lowStockThresholdOverrideHelp:"空欄の場合、グローバル設定（{{global}}%）を使用します。",clearRfid:"RFIDタグをクリア",rfidCleared:"RFIDタグをクリアしました",archive:"アーカイブ",restore:"復元",noSpools:"スプールがありません。最初のスプールを追加してください。",noAvailableSpools:"利用可能なスプールがありません。インベントリにスプールを追加するか、別のスロットからスプールの割り当てを解除してください。",kProfiles:"Kプロファイル",addKProfile:"Kプロファイルを追加",assignSpool:"スプールを割り当て",unassignSpool:"割り当て解除",assignSuccess:"スプールを割り当て、AMSスロットを設定しました",assignFailed:"スプールの割り当てに失敗しました",selectSpool:"このスロットに割り当てるスプールを選択",assigned:"割り当て済み",assigning:"割り当て中...",searchSpools:"スプールを検索...",showAllSpools:"すべてのスプールを表示",allMaterials:"すべての素材",filterByBrand:"ブランドで絞り込み...",showArchived:"アーカイブ済みを表示",quickAdd:"クイック追加（在庫）",quantity:"数量",stock:"在庫",configured:"設定済み",spoolsCreated:"{{count}}本のスプールを作成しました",spoolCreated:"スプールを作成しました",spoolUpdated:"スプールを更新しました",spoolDeleted:"スプールを削除しました",spoolArchived:"スプールをアーカイブしました",spoolRestored:"スプールを復元しました",deleteConfirm:"このスプールを削除しますか？この操作は元に戻せません。",archiveConfirm:"このスプールをアーカイブしますか？",advancedSettings:"詳細設定",filamentInfoTab:"フィラメント情報",paProfileTab:"PAプロファイル",filamentInfo:"フィラメント",additional:"追加情報",loadingPresets:"クラウドプリセットを読み込み中...",cloudConnected:"クラウド接続済み",cloudNotConnected:"クラウド未接続（デフォルト使用）",recentColors:"最近",searchColors:"色を検索...",searchResults:"検索結果",allColors:"すべての色",commonColors:"一般的な色",showLess:"少なく表示",showAll:"すべて表示",noColorsFound:"一致する色がありません",noResults:"結果なし",extraColorsLabel:"Extra colours",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.",extraColorsInvalid:"Ignored invalid hex: {{tokens}}",colorEffectLabel:"Effect",colorEffect:{none:"None",sparkle:"Sparkle",wood:"Wood",marble:"Marble",glow:"Glow",matte:"Matte",silk:"Silk",galaxy:"Galaxy",rainbow:"Rainbow",metal:"Metal",translucent:"Translucent",gradient:"Gradient",dualColor:"Dual Color",triColor:"Tri Color",multicolor:"Multicolor"},selectMaterialFirst:"フィラメント情報タブで素材を選択してください。",noPrintersConfigured:"プリンターが設定されていません。プリンターを追加してください。",matchingFilter:"フィルター",anyBrand:"すべてのブランド",anyVariant:"すべてのバリアント",autoSelect:"自動選択",matches:"件一致",match:"件一致",noMatches:"一致なし",connected:"接続済み",offline:"オフライン",printerOffline:"プリンターがオフラインです。接続してキャリブレーションプロファイルを表示してください。",noKProfilesMatch:"選択したフィラメントに一致するKプロファイルがありません。",leftNozzle:"左ノズル",rightNozzle:"右ノズル",profilesSelected:"キャリブレーションプロファイル選択済み",totalInventory:"在庫合計",totalConsumed:"総消費量",byMaterial:"素材別",inPrinter:"プリンター内",lowStock:"残量少",sinceTracking:"追跡開始以降",loadedInAms:"AMS/Extに装填中",remaining:"残り",weightCheck:"重量チェック",lastWeighed:"最終計量",neverWeighed:"未計量",search:"スプールを検索...",showing:"表示",to:"〜",of:"/",show:"表示",spools:"スプール",spool:"スプール",page:"ページ",noSpoolsMatch:"結果なし",noSpoolsMatchDesc:"検索やフィルターを調整してみてください。",active:"アクティブ",archived:"アーカイブ済み",all:"すべて",used:"使用済み",new:"新規",clearFilters:"フィルターをクリア",table:"テーブル",cards:"カード",net:"正味",groupSimilar:"グループ化",groupedSpools:"{{count}}本の同一スプール",groupedRows:"行",columns:"列",configureColumns:"列の設定",configureColumnsDesc:"ドラッグして並べ替えるか、矢印を使用してください。目のアイコンで表示/非表示を切り替えます。",visible:"表示中",reset:"リセット",cancel:"キャンセル",applyChanges:"変更を適用",moveUp:"上へ移動",moveDown:"下へ移動",hideColumn:"列を非表示",showColumn:"列を表示",linkToSpool:"スプールにリンク",tagLinked:"タグがスプールにリンクされました",tagLinkFailed:"タグのリンクに失敗しました",tagAlreadyLinked:"タグは既に別のスプールにリンクされています",unknownTag:"不明なRFIDタグが検出されました",usageHistory:"使用履歴",noUsageHistory:"まだ使用記録がありません",printName:"プリント名",weightConsumed:"消費重量",clearHistory:"クリア",historyCleared:"使用履歴がクリアされました",fillSourceLabel:"(Inv)",lowStockThresholdError:"しきい値は0.1から99.9の間でなければなりません",assignMismatchTitle:"材料の不一致",assignMismatchMessage:"選択したスプールの材料「{{spoolMaterial}}」は、{{location}} のトレイ材料「{{trayMaterial}}」と一致しません。割り当てますか？",assignMismatchConfirm:"強制的に割り当て",assignPartialMismatchMessage:"スプールの材料「{{spoolMaterial}}」は「{{trayMaterial}}」に似ていますが、{{location}} と完全には一致しません。続行しますか？",assignProfileMismatchMessage:"スプールのプロファイル「{{spoolProfile}}」は {{location}} のトレイプロファイル「{{trayProfile}}」と一致しません。続行しますか？"},timelapse:{title:"タイムラプス",create:"タイムラプスを作成",download:"ダウンロード",delete:"削除",preview:"プレビュー",frameRate:"フレームレート",quality:"品質",processing:"バックアップファイルを処理中...",noTimelapses:"利用可能なタイムラプスがありません"},ams:{title:"AMS",slot:"スロット",empty:"<空>",emptySlot:"空のスロット",unknown:"不明",humidity:"湿度",temperature:"温度",filamentType:"フィラメントタイプ",filamentColor:"色",remaining:"残り",history:"AMS履歴",noHistory:"メンテナンス履歴がありません",configureSlot:"フィラメントプロファイルとK値でスロットを設定",externalSpool:"外部スプール",profile:"プロファイル",kFactor:"K値",fill:"充填率",configure:"設定",used:"使用済み",remainingUnit:"残り"},printModal:{title:"印刷を開始",selectPrinter:"プリンターを選択",selectPlate:"プレートを選択",filamentMapping:"フィラメントマッピング",totalCost:"合計コスト:",slotRemainingShort:" - 残{{grams}}g",printSettings:"印刷設定",bedLeveling:"ベッドレベリング",flowCalibration:"フローキャリブレーション",vibrationCalibration:"振動キャリブレーション",layerInspection:"第一層検査",timelapse:"タイムラプス",startPrint:"印刷を開始",addToQueue:"キューに追加",cancel:"キャンセル",noPrintersAvailable:"利用可能なプリンターがありません",printerBusy:"プリンターは使用中です",printerOffline:"プリンターはオフラインです",sameTypeDifferentColor:"同じ種類、異なる色",filamentTypeNotLoaded:"フィラメントタイプが未読み込み",openCalendar:"カレンダーを開く",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"左ノズル",rightNozzleTooltip:"右ノズル",filamentOverride:"フィラメントオーバーライド",filamentOverrideHint:"モデルベースの割り当てに使用するフィラメントをオプションで上書きします。スケジューラは元の3MF値ではなく、選択したフィラメントに基づいてマッチングします。",originalFilament:"オリジナル",overrideWith:"変更先",resetToOriginal:"オリジナルに戻す",insufficientFilamentTitle:"フィラメントが不足しています",insufficientFilamentMessage:"割り当てられたスプールの一部は、この印刷に必要な量より残量が少ないです:",insufficientFilamentLine:"{{printer}} - {{slot}}: 必要 {{required}}g、残り {{remaining}}g",printAnyway:"それでも印刷",forceColorMatch:"カラーマッチを強制",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"{{count}}台のプリンターに段階的に送信",gcodeInjection:"自動印刷G-codeを挿入"},backup:{title:"バックアップと復元",createBackup:"バックアップを作成",restoreBackup:"バックアップの復元",restoreDescription:"バックアップファイルからすべてのデータを置き換える",downloadBackup:"バックアップをダウンロード",uploadBackup:"バックアップをアップロード",lastBackup:"最終バックアップ",autoBackup:"自動バックアップ",backupNow:"今すぐバックアップ",restoreWarning:"警告: バックアップの復元は現在のすべてのデータを上書きします。",includeArchives:"アーカイブを含む",includeSettings:"設定を含む",includeProfiles:"プロファイルを含む",backupSuccess:"バックアップを作成しました",restoreSuccess:"バックアップを復元しました",backupFailed:"バックアップに失敗しました",restoreFailed:"復元に失敗しました",restoreNote:"復元中、仮想プリンターは停止されます",githubBackup:"GitHubバックアップ",enabled:"有効",cloudLoginRequired:"Bambu Cloudログインが必要です。GitHubバックアップを有効にするには、プロファイル → クラウドプロファイルからサインインしてください。",cloudLoginRequiredShort:"Cloudログインが必要",githubDescription:"プロファイルをプライベートGitHubリポジトリに自動的に同期し、バックアップとバージョン履歴を保持します。",repositoryUrl:"リポジトリURL",personalAccessToken:"個人アクセストークン",tokenSaved:"(保存済み)",enterNewToken:"新しいトークンを入力して更新",tokenHint:"Contents読み書き権限を持つきめ細かいトークン",branch:"ブランチ",manualOnly:"手動のみ",hourly:"毎時",daily:"毎日",weekly:"毎週",includeInBackup:"バックアップに含める",kProfiles:"Kプロファイル",kProfilesDescription:"接続されたプリンターからの圧力キャリブレーション",noPrintersConnected:"プリンターが接続されていません",printersConnected:"{{connected}}/{{total}} 接続済み",cloudProfiles:"クラウドプロファイル",cloudProfilesDescription:"Bambu Cloudからのフィラメント、プリンター、プロセスプリセット",appSettings:"アプリ設定",appSettingsDescription:"Bambuddy設定（データベース全体）",spoolInventory:"スプール在庫",spoolInventoryDescription:"フィラメントスプール、使用履歴、コスト追跡",printArchives:"印刷アーカイブ",printArchivesDescription:"印刷履歴メタデータ（gcode/3MFファイルなし）",lastBackupAt:"最終バックアップ:",noBackupsYet:"バックアップはまだありません",next:"次回:",startingBackup:"バックアップを開始しています...",test:"テスト",enableBackup:"バックアップを有効化",testConnection:"接続テスト",enterRepoUrl:"リポジトリURLを入力してください",enterRepoAndToken:"リポジトリURLとアクセストークンを入力してください",repoRequired:"リポジトリURLは必須です",tokenRequired:"アクセストークンは必須です",githubBackupEnabled:"GitHubバックアップが有効になりました",tokenUpdated:"トークンが更新されました",settingsSaved:"設定が保存されました",failedToSave:"保存に失敗しました: {{message}}",backupCompleteFiles:"バックアップ完了 - {{count}}ファイルが更新されました",backupSkippedNoChanges:"バックアップをスキップ - 変更なし",backupFailed2:"バックアップに失敗しました: {{message}}",clearedLogs:"{{count}}件のログを削除しました",failedToClearLogs:"ログの削除に失敗しました: {{message}}",history:"履歴",clear:"クリア",date:"日付",status:"ステータス",commit:"コミット",localBackup:"ローカルバックアップ",localBackupDescription:"データベース、アーカイブ、アップロード、すべてのファイルを含むBambuddyデータの完全なバックアップを作成します。",downloadBackupLabel:"バックアップをダウンロード",completeBackupZip:"完全バックアップ: データベース + 全ファイル (ZIP)",download:"ダウンロード",preparingBackup:"バックアップを準備しています...",creatingArchive:"バックアップアーカイブを作成しています...大きなアーカイブの場合、時間がかかることがあります。",downloadingFile:"バックアップファイルをダウンロードしています...",backupDownloaded:"バックアップのダウンロードが成功しました",failedToCreateBackup:"バックアップの作成に失敗しました: {{message}}",restore:"復元",restoreReplacesAll:"復元はすべてのデータを置き換えます。",restoreReplacesAllDetail:"現在のデータベースとファイルは完全に置き換えられます。復元後に再起動が必要です。",restoreConfirmTitle:"バックアップを復元",restoreConfirmMessage:'"{{filename}}"から復元してもよろしいですか？現在のデータベースとすべてのファイルが完全に置き換えられます。復元後にアプリケーションの再起動が必要です。',restoreConfirmButton:"バックアップを復元",uploadingFile:"バックアップファイルをアップロードしています...",backupRestoredRestart:"バックアップが復元されました。Bambuddyを再起動してください。",failedToRestore:"バックアップの復元に失敗しました。ファイル形式を確認してください。",reloadNow:"今すぐリロード",creatingBackup:"バックアップを作成中",restoringBackup:"バックアップを復元中",preparing:"準備中...",processing:"処理中...",doNotClosePage:"このページを閉じたり、移動しないでください。大きなバックアップの場合、この操作には数分かかることがあります。",restoring:"復元中...",restoreComplete:"復元完了",restoreFailed2:"復元失敗",importSettings:"バックアップファイルから設定をインポート",pleaseWaitRestoring:"データの復元中です。お待ちください",selectBackupFile:"クリックしてバックアップファイルを選択 (.jsonまたは.zip)",duplicateHandling:"重複処理の仕組み:",matchPrinters:"プリンター",matchPrintersBy:"シリアル番号で照合",matchSmartPlugs:"スマートプラグ",matchSmartPlugsBy:"IPアドレスで照合",matchNotificationProviders:"通知プロバイダー",matchNotificationProvidersBy:"名前で照合",matchFilaments:"フィラメント",matchFilamentsBy:"名前 + タイプ + ブランドで照合",matchArchives:"アーカイブ",matchArchivesBy:"コンテンツハッシュで照合（常にスキップ）",matchPendingUploads:"保留中のアップロード",matchPendingUploadsBy:"ファイル名で照合",matchSettingsTemplates:"設定とテンプレート",matchSettingsTemplatesBy:"常に上書き",replaceExisting:"既存のデータを置き換え",keepExisting:"既存のデータを保持",overwriteDescription:"既に存在する項目をバックアップデータで上書き",keepDescription:"まだ存在しない項目のみ復元",overwriteCaution:"注意:",overwriteWarning:"上書きすると、現在の設定がバックアップのデータで置き換えられます。プリンターのアクセスコードはセキュリティのため上書きされません。",cancel:"キャンセル",processingBackup:"バックアップファイルを処理しています...",itemsRestored:"復元済み",itemsSkipped:"スキップ済み",restored:"復元済み",skippedAlreadyExist:"スキップ（既に存在）",filesCategory:"ファイル（3MF、サムネイルなど）",andMore:"...他{{count}}件",newApiKeysGenerated:"新しいAPIキーが生成されました",keysShownOnce:"これらのキーは一度だけ表示されます。今すぐコピーしてください！",copy:"コピー",noDataFound:"バックアップファイルに復元するデータが見つかりませんでした。",close:"閉じる",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"設定",notification_providers:"通知プロバイダー",notification_templates:"通知テンプレート",smart_plugs:"スマートプラグ",printers:"プリンター",filaments:"フィラメント",maintenance_types:"メンテナンスタイプ",archives:"アーカイブ",projects:"プロジェクト",pending_uploads:"保留中のアップロード",external_links:"外部リンク",api_keys:"APIキー"}},tags:{title:"タグ",addTag:"タグを追加",editTag:"タグを編集",deleteTag:"タグを削除",tagName:"タグ名",tagColor:"タグの色",noTags:"タグがありません",deleteConfirm:"このタグを削除しますか？",manageTags:"タグを管理"},uploadModal:{title:"3MFファイルのアップロード",dragDrop:".3mfファイルをここにドラッグ＆ドロップ",or:"または",browseFiles:"ファイルを参照",extractionInfo:"プリンターモデルは3MFファイルのメタデータから自動的に抽出されます。",uploaded:"アップロード済み",failed:"アップロードに失敗しました",uploading:"アップロード中...",upload:"アップロード",uploadFailed:"アップロード失敗"},editArchive:{title:"アーカイブを編集",name:"名前",namePlaceholder:"印刷名",printer:"プリンター",noPrinter:"プリンターなし",project:"プロジェクト",noProject:"プロジェクトなし",itemsPrinted:"印刷数",itemsPrintedHelp:"この印刷ジョブで製造したアイテム数",notes:"メモ",notesPlaceholder:"この印刷についてメモを追加...",externalLink:"外部リンク",externalLinkPlaceholder:"https://...",externalLinkHelp:"Printables、Thingiverse、その他のソースへのリンク",tags:"タグ",tagsPlaceholder:"タグを追加...",addMoreTags:"タグをさらに追加...",matchingTags:'"{{query}}" に一致',existingTags:"既存のタグ",clickToAdd:"（クリックして追加）",status:"ステータス",failureReason:"失敗理由",selectReason:"理由を選択...",photos:"印刷結果の写真",photosHelp:"+ をクリックして印刷結果の写真を追加",printResult:"印刷結果",saving:"保存中...",failureReasons:{adhesionFailure:"定着不良",spaghettiDetached:"スパゲッティ / 剥離",layerShift:"レイヤーシフト",cloggedNozzle:"ノズル詰まり",filamentRunout:"フィラメント切れ",warping:"反り",stringing:"糸引き",underExtrusion:"押出不足",powerFailure:"電源障害",userCancelled:"ユーザーによるキャンセル",other:"その他"},statuses:{completed:"完了",failed:"失敗",aborted:"キャンセル",printing:"印刷中"}},kProfiles:{title:"Kプロファイル",noPrintersConfigured:"プリンターが設定されていません",addPrinterInSettings:"Kプロファイルを管理するには設定でプリンターを追加してください",noActivePrinters:"アクティブなプリンターがありません",enablePrinterConnection:"Kプロファイルを表示するにはプリンター接続を有効にしてください",loadingProfiles:"Kプロファイルを読み込み中...",printerOffline:"プリンターオフライン",printerOfflineDesc:"選択したプリンターは接続されていません。電源を入れてKプロファイルを表示してください。",noMatchingProfiles:"一致するプロファイルなし",noMatchingProfilesDesc:"検索条件に一致するプロファイルがありません",noKProfiles:"Kプロファイルなし",noKProfilesDesc:"{{diameter}}mmノズル用の圧力キャリブレーションプロファイルが見つかりません",createFirstProfile:"最初のプロファイルを作成",printer:"プリンター",nozzle:"ノズル",refresh:"更新",addProfile:"K-プロファイルを追加",export:"エクスポート",import:"インポート",select:"選択",selectAll:"すべて選択",delete:"削除",searchPlaceholder:"名前またはフィラメントで検索...",allExtruders:"すべてのエクストルーダー",leftOnly:"左のみ",rightOnly:"右のみ",allFlow:"すべてのフロー",hfOnly:"HFのみ",sOnly:"Sのみ",sortName:"ソート: 名前",sortKValue:"ソート: K値",sortFilament:"ソート: フィラメント",leftExtruder:"左エクストルーダー",rightExtruder:"右エクストルーダー",modal:{addTitle:"Kプロファイルを追加",editTitle:"Kプロファイルを編集",profileName:"プロファイル名",profileNamePlaceholder:"マイPLAプロファイル",kValue:"K値",kValuePlaceholder:"0.020",kValueHelp:"一般的な範囲: PLA 0.01〜0.06、PETG 0.02〜0.10",filament:"フィラメント",selectFilament:"フィラメントを選択...",noFilamentsHelp:"フィラメントが見つかりません。Bambu Studioでまずプロファイルを作成してください。",flowType:"フロータイプ",highFlow:"ハイフロー",standard:"スタンダード",nozzleSize:"ノズルサイズ",extruder:"エクストルーダー",extruders:"エクストルーダー",left:"左",right:"右",notes:"メモ（ローカル保存）",notesPlaceholder:"このプロファイルのメモを追加...",notesHelp:"メモはBambuddyに保存され、プリンターには保存されません",syncing:"プリンターと同期中...",savingExtruder:"エクストルーダーに保存中 {{current}}/{{total}}...",pleaseWait:"お待ちください"},deleteConfirm:{title:"プロファイルを削除",cannotUndo:"元に戻せません",message:"「{{name}}」をプリンターから削除しますか？"},bulkDelete:{title:"プロファイルを削除",cannotUndo:"元に戻せません",message:"選択した{{count}}件のプロファイルをプリンターから削除しますか？"},toast:{profileSaved:"Kプロファイルを保存しました",profilesSaved:"Kプロファイルを{{count}}台のエクストルーダーに保存しました",selectAtLeastOneExtruder:"エクストルーダーを1つ以上選択してください",profileDeleted:"Kプロファイルを削除しました",profilesDeleted:"{{count}}件のプロファイルを削除しました",exportedProfiles:"{{count}}件のプロファイルをエクスポートしました",importedProfiles:"{{total}} 件中 {{count}} 件のプロファイルをインポートしました",noProfilesToExport:"エクスポートするプロファイルがありません",invalidFileFormat:"無効なファイル形式",failedToParseImport:"インポートファイルの解析に失敗しました",failedToSaveBatch:"Kプロファイルの保存に失敗しました",noteSaved:"メモを保存しました",failedToSaveNote:"メモの保存に失敗しました"},permission:{noRead:"プロファイルを更新する権限がありません",noCreate:"プロファイルを追加する権限がありません",noUpdate:"Kプロファイルを更新する権限がありません",noDelete:"Kプロファイルを削除する権限がありません",noExport:"プロファイルをエクスポートする権限がありません",noImport:"プロファイルをインポートする権限がありません"}},virtualPrinter:{title:"仮想プリンター",running:"稼働中",stopped:"停止",description:{default:"Bambu StudioとOrcaSlicerに表示される仮想プリンターを有効化。このプリンターに送信されたファイルは印刷せずに直接アーカイブされます。",proxy:"スライサーのトラフィックを実際のプリンターに転送するプロキシを有効化。任意のネットワーク経由でリモート印刷が可能です。"},enable:{title:"仮想プリンターを有効化",visibleInSlicer:"スライサーの検出リストに「Bambuddy」として表示",proxyingTo:"{{name}}にプロキシ中",notActive:"非アクティブ"},model:{title:"プリンターモデル",description:"エミュレートするプリンターモデルを選択。",restartWarning:"モデルを変更すると仮想プリンターが再起動されます"},accessCode:{title:"アクセスコード",isSet:"アクセスコードが設定されています",notSet:"アクセスコード未設定 - 有効化に必要です",placeholder:"8文字のコードを入力",placeholderChange:"新しいコードを入力して変更",hint:"正確に8文字必要です。スライサーの認証に使用されます。",charCount:"({{count}}/8)"},targetPrinter:{title:"ターゲットプリンター",configured:"プロキシターゲット設定済み",notConfigured:"ターゲットプリンター未選択 - プロキシモードに必要です",placeholder:"プリンターを選択...",hint:"スライサートラフィックの転送先プリンターを選択。プリンターはLANモードである必要があります。",noPrinters:"プリンターが設定されていません。プロキシモードを使用するにはまずプリンターを追加してください。"},remoteInterface:{title:"ネットワークインターフェース上書き",configured:"インターフェース上書き有効",optional:"オプション — 自動検出IPが間違っている場合に使用（複数NIC、Docker、VPNなど）",placeholder:"自動検出（デフォルト）...",hint:"SSDPで広告され、TLS証明書に使用されるIPアドレスを上書きします。Bambuddyに複数のネットワークインターフェースがある場合に便利です。"},mode:{title:"モード",archive:"アーカイブ",archiveDesc:"ファイルを即座にアーカイブ",review:"レビュー",reviewDesc:"アーカイブ前にレビュー",queue:"キュー",queueDesc:"アーカイブしてキューに追加",proxy:"プロキシ",proxyDesc:"実際のプリンターに転送"},autoDispatch:{title:"自動ディスパッチ",description:"キューに追加されたときに自動的に印刷を開始します。オフの場合、手動ディスパッチを待ちます。"},tailscaleDisabled:{title:"Tailscale統合",description:"有効にすると、Tailscaleを使用して信頼できるTLS証明書を使用します。自己署名証明書のみを使用する場合は無効にします。"},setupRequired:{title:"セットアップが必要です",description:"仮想プリンター機能を使用するには追加のシステム設定が必要です。ポートフォワーディング、ファイアウォールルール、プラットフォーム固有の設定が含まれます。",readGuide:"有効にする前にセットアップガイドをお読みください"},howItWorks:{title:"仕組み",step1:"同じLAN上では、仮想プリンターはスライサー（Bambu Studio / OrcaSlicer）に自動的に表示されます。他のネットワークからは、IPアドレスとアクセスコードで手動で追加してください。",step2:"アーカイブ、レビュー、キューモードでは、スライサーの「送信」ボタンを使用して3MFファイルをBambuddyにアップロードします。スライサーは「印刷成功」と表示しますが、ファイルは保存され、印刷はされません。",step3:"プロキシモードでは、仮想プリンターはすべてのトラフィックを実際のプリンターに転送します。直接接続されているかのように印刷がすぐに開始されます。"},status:{title:"ステータス詳細",printerName:"プリンター名",model:"モデル",serialNumber:"シリアル番号",mode:"モード",pendingFiles:"保留中のファイル",targetPrinter:"ターゲットプリンター",ftpPort:"FTPポート",mqttPort:"MQTTポート",ftpConnections:"FTP接続数",mqttConnections:"MQTT接続数"},toast:{updated:"仮想プリンター設定を更新しました",failedToUpdate:"設定の更新に失敗しました",tailscaleNotAvailable:"このホストにTailscaleがインストールされていません。先にTailscaleをインストールしてから再試行してください。",copyFailed:"コピーに失敗しました — テキストを手動で選択してください",accessCodeRequired:"先にアクセスコードを設定してください",targetPrinterRequired:"先にターゲットプリンターを選択してください",bindIpRequired:"先にバインドIPを設定してください",accessCodeEmpty:"アクセスコードは空にできません",accessCodeLength:"アクセスコードは8文字である必要があります",created:"仮想プリンターを作成しました",failedToCreate:"仮想プリンターの作成に失敗しました",deleted:"仮想プリンターを削除しました",failedToDelete:"仮想プリンターの削除に失敗しました"},list:{title:"仮想プリンター",add:"追加",addFirst:"仮想プリンターを追加",empty:"仮想プリンターが設定されていません。追加して始めましょう。"},bindIp:{title:"バインドインターフェース",placeholder:"インターフェースを選択...",hint:"この仮想プリンターがバインドするネットワークインターフェース。プリンターごとに一意である必要があります。"},proxy:{accessCodeHint:"プロキシモードでは、スライサーにターゲットプリンターのアクセスコードを使用してください。接続は実際のプリンターに透過的に転送されます。"},addDialog:{title:"仮想プリンターを追加",name:"名前",hint:"アクセスコード、ターゲットプリンター、その他の設定は作成後に設定できます。",create:"作成"},deleteConfirm:{title:"仮想プリンターを削除",message:"「{{name}}」を削除してもよろしいですか？このプリンターのすべてのサービスが停止されます。"},archiveNameSource:{title:"アーカイブ名のソース",description:"仮想プリンター経由でファイルが到着したときに、新しいアーカイブをどのように命名するかを選択します。「メタデータ」は3MFに埋め込まれたスライサータイトル（デフォルト）を使用します。「ファイル名」はBambu StudioがFTPで送信したファイル名を使用します — 「プリンターに送信」ダイアログでジョブ名を変更した場合に便利です。",metadata:"メタデータ",filename:"ファイル名"}},modelViewer:{openInSlicer:"スライサーで開く",tabs:{model:"3Dモデル",gcode:"G-codeプレビュー"},notAvailable:"利用不可",notSliced:"未スライス",plates:"プレート",allPlates:"全プレート",plateNumber:"プレート {{number}}",plateCount:"{{count}} プレート",plateCount_other:"{{count}} プレート",objectCount:"{{count}} オブジェクト",objectCount_other:"{{count}} オブジェクト",filamentCount:"{{count}} フィラメント",filamentCount_other:"{{count}} フィラメント",eta:"予想時間 {{minutes}} 分",noPreview:"このファイルのプレビューは利用できません",pagination:{pageOf:"ページ {{current}} / {{total}}",prev:"前へ",next:"次へ"},errors:{failedToLoad:"ファイルの読み込みに失敗しました",noMeshes:"3MFファイルにメッシュが見つかりません",unsupportedFormat:"サポートされていないファイル形式です"}},maintenanceDescriptions:{lubricateCarbonRods:"カーボンロッドに潤滑剤を塗布してスムーズな動きを確保",lubricateRails:"リニアレールの潤滑",cleanNozzle:"ノズル/ホットエンドの清掃",checkBelts:"ベルト張力の確認",cleanBuildPlate:"ビルドプレートの清掃",checkExtruder:"エクストルーダーギアの確認",checkCooling:"冷却ファンの確認",generalInspection:"総合点検",cleanCarbonRods:"カーボンロッドの清掃",lubricateSteelRods:"スチールロッドに潤滑剤を塗布してスムーズな動きを確保",cleanSteelRods:"スチールロッドの清掃",cleanLinearRails:"リニアレールを拭いてほこりや汚れを除去",checkPtfeTube:"PTFEチューブの確認",replaceHepaFilter:"HEPAフィルター交換",replaceCarbonFilter:"カーボンフィルター交換",lubricateLeftNozzleRail:"左ノズルレールの潤滑"},smartPlugs:{offline:"オフライン",admin:"管理",openPlugAdminPage:"プラグ管理ページを開く",deleteSmartPlug:"スマートプラグを削除",turnOnSmartPlug:"スマートプラグをオンにする",turnOffSmartPlug:"スマートプラグをオフにする",turnOn:"オンにする",turnOff:"オフにする",addSmartPlug:{scanningNetwork:"ネットワークをスキャン中...",chooseEntity:"エンティティを選択...",connectionFailed:"接続失敗",searchEntities:"エンティティを検索...",searchPowerSensors:"電力センサーを検索...",searchEnergySensors:"エネルギーセンサーを検索...",placeholders:{plugName:"リビングルームプラグ",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"電力トピックと同じ、または異なる"}},linkedTo:"リンク先:",monitorOnly:"監視のみ",alerts:"アラート",scheduleOn:"オン {{time}}",scheduleOff:"オフ {{time}}",on:"オン",off:"オフ",power:"電力",kwhToday:"本日のkWh",settings:"設定",automationSettings:"自動化設定",showInSwitchbar:"スイッチバーに表示",quickAccessSidebar:"サイドバーからクイックアクセス",enabled:"有効",enableAutomation:"このプラグの自動化を有効にする",autoOn:"自動オン",autoOnDescription:"印刷開始時にオンにする",autoOff:"自動オフ",autoOffDescription:"印刷完了時にオフにする（ワンショット）",autoOffPersistent:"有効のまま維持",autoOffPersistentDescription:"ワンショットではなく印刷間で有効のまま維持",turnOffDelayMode:"オフ遅延モード",time:"時間",temp:"温度",delayMinutes:"遅延（分）",tempThreshold:"温度しきい値（°C）",tempThresholdDescription:"ノズルがこの温度以下に冷却されるとオフになります",edit:"編集",deleteConfirm:'"{{name}}"を削除してもよろしいですか？この操作は取り消せません。',turnOnConfirm:'"{{name}}"をオンにしてもよろしいですか？',turnOffConfirm:'"{{name}}"をオフにしてもよろしいですか？接続されたデバイスの電源が切れます。',failedToTurn:'"{{name}}"を{{action}}できませんでした',unknown:"不明",addTitle:"スマートプラグを追加",editTitle:"スマートプラグを編集",stopScanning:"スキャン停止",discoverTasmota:"Tasmotaデバイスを検出",foundDevices:"{{count}}台のデバイスが見つかりました - クリックして選択:",noDevicesFound:"ネットワーク上にTasmotaデバイスが見つかりません",haNotConfigured:"Home Assistantが設定されていません。設定場所:",haSettingsPath:"設定 → ネットワーク → Home Assistant",selectEntity:"エンティティを選択 *",ipAddress:"IPアドレス *",nameLabel:"名前 *",username:"ユーザー名",password:"パスワード",authHint:"Tasmotaデバイスが認証を必要としない場合は空のままにしてください",linkToPrinter:"プリンターにリンク",noPrinter:"プリンターなし（手動制御のみ）",linkingDescription:"リンクすると印刷開始/完了時に自動でオン/オフできます",powerAlerts:"電力アラート",alertAbove:"上限アラート（W）",alertBelow:"下限アラート（W）",alertDescription:"電力消費がこれらのしきい値を超えた場合に通知します。無効にするには空のままにしてください。",dailySchedule:"デイリースケジュール",turnOnAt:"オンにする時刻",turnOffAt:"オフにする時刻",scheduleDescription:"毎日これらの時刻にプラグを自動的にオン/オフします。スキップするには空のままにしてください。",showOnPrinterCard:"プリンターカードに表示",displayOnPrinterCard:"プリンターカードにボタンを表示",connectedResult:"接続成功！",deviceLabel:"デバイス: {{name}} - ",stateLabel:"状態: {{state}}",test:"テスト",delete:"削除",save:"保存",add:"追加",cancel:"キャンセル",failedToStartScan:"スキャンを開始できませんでした",nameRequired:"名前は必須です",entityRequired:"Home AssistantプラグにはエンティティIDが必要です",mqttTopicRequired:"電力、エネルギー、または状態監視用に少なくとも1つのMQTTトピックを設定する必要があります",loadingEntities:"エンティティを読み込み中...",loading:"読み込み中...",failedToLoadEntities:"エンティティの読み込みに失敗しました: {{error}}",noEntitiesMatching:'"{{search}}"に一致するエンティティが見つかりません',noEntitiesAvailable:"利用可能なエンティティがありません",searchingEntities:"すべてのエンティティを検索中（{{count}}件見つかりました）",showingEntities:"switch、light、input_booleanを表示（{{count}}件利用可能）",energyMonitoringOptional:"エネルギー監視（オプション）",energyMonitoringHint:"電力/エネルギーデータを提供するセンサーを検索して選択します。",powerSensorW:"電力センサー（W）",energyTodayKwh:"本日のエネルギー（kWh）",totalEnergyKwh:"総エネルギー（kWh）",noMatchingSensors:"一致するセンサーがありません",none:"なし",mqttNotConfigured:"MQTTブローカーが設定されていません。ブローカーアドレスを設定してください:",mqttSettingsPath:"設定 → ネットワーク → MQTT配信",mqttNotConfiguredSuffix:"（配信を有効にする必要はありません。ブローカーの詳細を入力するだけです）。",mqttMonitorOnlyDescription:"MQTTプラグはMQTTサブスクリプション経由で電力/エネルギーデータを受信します。オン/オフ制御は利用できません - MQTTブローカーまたはホームオートメーションシステムを使用してください。",powerMonitoring:"電力監視",energyMonitoring:"エネルギー監視",stateMonitoring:"状態監視",optional:"オプション",topic:"トピック",jsonPath:"JSONパス",multiplier:"乗数",onValue:"ON値",mqttPowerHint:`JSONパスはJSONペイロードから値を抽出します（例: "power_l1"）。トピックが生の数値を送信する場合は空のままにしてください。
+Valeur ON : la chaîne exacte signifiant "ON". Laisser vide pour la détection auto (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"URL de puissance",restPowerPath:"Power JSON Path",restPowerMultiplier:"Multiplicateur de puissance",restEnergyUrl:"URL d'énergie",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Multiplicateur d'énergie",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"URL séparée pour les données de puissance (utilise l'URL de statut si vide)",restEnergyUrlHint:"URL séparée pour les données d'énergie (utilise l'URL de statut si vide)",restEnergyHint:"Chaque valeur peut utiliser sa propre URL ou se rabattre sur l'URL de statut. Utilisez les multiplicateurs pour la conversion d'unités (ex : 0.001 pour convertir Wh en kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"Aucun commutateur dans la barre",enableSwitchbarHint:'Activez "Afficher dans la barre de commutateurs" dans Paramètres > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notifications par e-mail SMTP",telegram:"Notifications via un bot Telegram",discord:"Envoyer vers un canal Discord via webhook",ntfy:"Notifications push gratuites, auto-hébergeables",pushover:"Notifications push simples et fiables",callmebot:"Notifications WhatsApp gratuites via CallMeBot",webhook:"POST HTTP générique vers n'importe quelle URL",homeassistant:"Notifications persistantes dans le tableau de bord Home Assistant"},lastSuccess:"Dernier : {{date}}",error:"Erreur",printer:"Imprimante :",allPrinters:"Toutes les imprimantes",sendTestNotification:"Envoyer une notification de test",eventSettings:"Paramètres des événements",enabled:"Activé",sendFromProvider:"Envoyer des notifications depuis ce fournisseur",printEvents:"Événements d'impression",printerStatus:"État de l'imprimante",amsAlarms:"Alarmes AMS",amsHtAlarms:"Alarmes AMS-HT",printQueue:"File d'attente d'impression",start:"Début",plateCheck:"Vérification du plateau",complete:"Terminé",failed:"Échoué",stopped:"Arrêté",progress:"Progression",offline:"Hors ligne",lowFilament:"Filament bas",maintenance:"Maintenance",amsHumidity:"Humidité AMS",amsTemp:"Temp. AMS",amsHtHumidity:"Humidité AMS-HT",amsHtTemp:"Temp. AMS-HT",bedCooled:"Plateau refroidi",firstLayer:"Première couche",quiet:"Silencieux",digest:"Résumé {{time}}",printStarted:"Impression démarrée",plateNotEmpty:"Plateau non vide",plateNotEmptyDescription:"Objets détectés avant l'impression",printCompleted:"Impression terminée",bedCooledLabel:"Plateau refroidi",bedCooledDescription:"Plateau refroidi sous le seuil après l'impression",firstLayerCompleteLabel:"Première couche terminée",firstLayerCompleteDescription:"Notification avec photo après la première couche",missingSpoolAssignmentLabel:"Affectation de bobine manquante",missingSpoolAssignmentDescription:"Notifier quand une impression démarre et que des bacs requis n'ont pas de bobine assignée",printFailed:"Impression échouée",printStopped:"Impression arrêtée",progressMilestones:"Jalons de progression",progressMilestonesDescription:"Notifier à 25 %, 50 %, 75 %",printerOffline:"Imprimante hors ligne",printerError:"Erreur de l'imprimante",lowFilamentLabel:"Filament bas",maintenanceDue:"Maintenance requise",maintenanceDueDescription:"Notifier lorsqu'une maintenance est nécessaire",amsHumidityHigh:"Humidité AMS élevée",amsHumidityHighDescription:"L'humidité de l'AMS standard dépasse le seuil",amsTemperatureHigh:"Température AMS élevée",amsTemperatureHighDescription:"La température de l'AMS standard dépasse le seuil",amsHtHumidityHigh:"Humidité AMS-HT élevée",amsHtHumidityHighDescription:"L'humidité de l'AMS-HT dépasse le seuil",amsHtTemperatureHigh:"Température AMS-HT élevée",amsHtTemperatureHighDescription:"La température de l'AMS-HT dépasse le seuil",jobAdded:"Tâche ajoutée",jobAddedDescription:"Tâche ajoutée à la file d'attente",jobAssigned:"Tâche assignée",jobAssignedDescription:"Tâche basée sur le modèle assignée à l'imprimante",jobStarted:"Tâche démarrée",jobStartedDescription:"La tâche de la file a commencé l'impression",jobWaiting:"Tâche en attente",jobWaitingDescription:"Tâche en attente de filament ou imprimante",jobSkipped:"Tâche ignorée",jobSkippedDescription:"Tâche ignorée (échec précédent)",jobFailed:"Tâche échouée",jobFailedDescription:"La tâche n'a pas pu démarrer",queueComplete:"File d'attente terminée",queueCompleteDescription:"Toutes les tâches de la file sont terminées",quietHours:"Heures silencieuses",noNotificationsDuring:"Aucune notification pendant ces heures",editProviderToChangeQuietHours:"Modifier le fournisseur pour changer les heures silencieuses",dailyDigest:"Résumé quotidien",batchNotifications:"Regrouper les notifications en un seul résumé quotidien",sendAt:"Envoyer à {{time}}",editProviderToChangeDigestTime:"Modifier le fournisseur pour changer l'heure du résumé",edit:"Modifier",deleteProvider:"Supprimer le fournisseur de notifications",deleteConfirm:"Êtes-vous sûr de vouloir supprimer « {{name}} » ? Cette action est irréversible.",delete:"Supprimer",addTitle:"Ajouter un fournisseur de notifications",editTitle:"Modifier le fournisseur de notifications",nameLabel:"Nom *",namePlaceholder:"Mes notifications",providerTypeLabel:"Type de fournisseur *",configuration:"Configuration",testConfiguration:"Tester la configuration",printerFilter:"Filtre d'imprimante",onlyFromPrinter:"Envoyer uniquement les notifications pour les événements de cette imprimante",quietHoursDnd:"Heures silencieuses (Ne pas déranger)",quietStart:"Début",quietEnd:"Fin",dailyDigestLabel:"Résumé quotidien",sendDigestAt:"Envoyer le résumé à",digestCollected:"Les événements seront collectés et envoyés en un seul résumé à cette heure",notificationEvents:"Événements de notification",progressPercent:"(25 %, 50 %, 75 %)",bedCooledAfterPrint:"(après la fin de l'impression)",eventPriority:{sectionTitle:"Priorité ntfy",helpNtfy:"Choisissez une priorité pour chaque événement activé. ntfy l'utilise pour faire remonter les alertes (son, visibilité, comportement push). Les niveaux non définis ici utilisent la valeur par défaut du serveur ntfy.",min:"Min",low:"Basse",default:"Par défaut",high:"Haute",urgent:"Urgente"},cancel:"Annuler",save:"Enregistrer",add:"Ajouter",nameRequired:"Le nom est requis",fieldRequired:"{{field}} est requis",phoneNumber:"Numéro de téléphone",apiKey:"Clé API",serverUrl:"URL du serveur",topic:"Sujet",authToken:"Jeton d'authentification",userKey:"Clé utilisateur",appToken:"Jeton d'application",priority:"Priorité",botToken:"Jeton du bot",chatId:"ID du chat",smtpServer:"Serveur SMTP",smtpPort:"Port SMTP",security:"Sécurité",authentication:"Authentification",username:"Nom d'utilisateur",password:"Mot de passe",fromEmail:"E-mail expéditeur",toEmail:"E-mail destinataire",webhookUrl:"URL du webhook",payloadFormat:"Format du payload",authorization:"Autorisation",titleFieldName:"Nom du champ titre",messageFieldName:"Nom du champ message",editTemplate:"Modifier le modèle : {{name}}",titleLabel:"Titre",bodyLabel:"Corps",titlePlaceholder:"Titre de la notification...",bodyPlaceholder:"Corps de la notification...",availableVariables:"Variables disponibles",clickToInsert:"Cliquer pour insérer à la position du curseur dans le corps",livePreview:"Aperçu en direct",hide:"Masquer",show:"Afficher",loadingPreview:"Chargement de l'aperçu...",enterTemplateContent:"Saisir le contenu du modèle pour voir l'aperçu",titlePreview:"Titre :",bodyPreview:"Corps :",resetToDefault:"Réinitialiser par défaut",titleRequired:"Le titre est requis",bodyRequired:"Le corps est requis",notificationLog:"Journal des notifications",showFailedOnly:"Échecs uniquement",last24Hours:"Dernières 24 heures",last7Days:"7 derniers jours",last30Days:"30 derniers jours",last90Days:"90 derniers jours",justNow:"À l'instant",noFailedNotifications:"Aucune notification échouée",noNotificationsLogged:"Aucune notification enregistrée",unknownProvider:"Fournisseur inconnu",logTitle:"Titre",logMessage:"Message",logError:"Erreur",logProvider:"Fournisseur : {{type}}",logTime:"Heure : {{time}}",refresh:"Actualiser",clearOld:"Purger les anciens",statsSummary:"{{days}} derniers jours :",statsNotifications:"notifications",statsSent:"{{count}} envoyées",statsFailed:"{{count}} échouées",eventTypes:{print_start:"Impression démarrée",print_complete:"Impression terminée",print_failed:"Impression échouée",print_stopped:"Impression arrêtée",print_progress:"Progression",printer_offline:"Imprimante hors ligne",printer_error:"Erreur de l'imprimante",filament_low:"Filament bas",maintenance_due:"Maintenance requise",test:"Test"},userEmail:{title:"Notifications",emailNotifications:"Notifications par e-mail",emailNotificationsDesc:"Recevez des notifications par e-mail pour vos propres travaux d'impression. Les e-mails sont envoyés via les paramètres SMTP configurés dans l'authentification avancée.",sendingTo:"Les notifications seront envoyées à",noEmailWarning:"Votre compte n'a pas d'adresse e-mail. Contactez un administrateur pour en ajouter une.",printJobNotifications:"Notifications de travaux d'impression",printJobNotificationsDesc:"Choisissez quels événements déclenchent des notifications par e-mail pour les travaux d'impression que vous soumettez.",printJobStarts:"Démarrage du travail d'impression",printJobStartsDesc:"Être notifié quand votre travail d'impression commence.",printJobFinishes:"Fin du travail d'impression",printJobFinishesDesc:"Être notifié quand votre travail d'impression se termine avec succès.",printErrors:"Erreurs d'impression",printErrorsDesc:"Être notifié quand votre travail d'impression échoue ou rencontre une erreur.",printJobStops:"Travail d'impression arrêté",printJobStopsDesc:"Être notifié quand votre travail d'impression est annulé ou arrêté.",saveSuccess:"Préférences de notification sauvegardées.",saveError:"Impossible de sauvegarder les préférences de notification."}},richTextEditor:{bold:"Gras",italic:"Italique",underline:"Souligné",bulletList:"Liste à puces",numberedList:"Liste numérotée",alignLeft:"Aligner à gauche",alignCenter:"Centrer",alignRight:"Aligner à droite",addLink:"Ajouter lien",removeLink:"Retirer lien"},externalLinks:{noLinksConfigured:"Aucun lien externe configuré",deleteLink:"Supprimer lien",removeCustomIcon:"Retirer icône personnalisée",openInNewTab:"Ouvrir dans un nouvel onglet",placeholders:{linkName:"Mon Lien"}},keyboardShortcuts:{title:"Raccourcis Clavier",navigation:"Navigation",archivesSection:"Archives",kProfilesSection:"K-Profiles",generalSection:"Général",shortcuts:{goToPrinters:"Aller aux Imprimantes",goToArchives:"Aller aux Archives",goToQueue:"Aller à la File",goToStats:"Aller aux Stats",goToProfiles:"Aller aux Profils Cloud",goToSettings:"Aller aux Paramètres",focusSearch:"Focus recherche",openUploadModal:"Ouvrir téléversement",clearSelection:"Tout déselectionner",contextMenu:"Menu contextuel (cartes)",refreshProfiles:"Rafraîchir profils",newProfile:"Nouveau profil",exitSelectionMode:"Quitter mode sélection",showHelp:"Afficher cette aide"},footer:"Échap ou clic extérieur pour fermer"},notificationLog:{title:"Journal de Notification",events:{printStarted:"Début impression",printComplete:"Fin impression",printFailed:"Échec impression",printStopped:"Arrêt impression",progress:"Progression",printerOffline:"Hors ligne",printerError:"Erreur",lowFilament:"Filament bas",maintenanceDue:"Maintenance",test:"Test"},timeAgo:{justNow:"À l'instant",minutesAgo:"Il y a {{minutes}}m",hoursAgo:"Il y a {{hours}}h"}},restoreBackup:{title:"Restaurer Sauvegarde",restoring:"Restauration...",restoreComplete:"Restauration terminée",restoreFailed:"Échec restauration",importSettings:"Importer les réglages d'un fichier",pleaseWait:"Patientez pendant la restauration",clickToSelect:"Fichier .json ou .zip",howDuplicateHandling:"Gestion des doublons :",categories:{printers:"Imprimantes",smartPlugs:"Prises",notificationProviders:"Fournisseurs",filaments:"Filaments",archives:"Archives",pendingUploads:"Téléversements en attente",settingsTemplates:"Réglages & Modèles"},matchingInfo:{printers:"par numéro de série",smartPlugs:"par adresse IP",notificationProviders:"par nom",filaments:"par nom+type+marque",archives:"par empreinte numérique (hash)",pendingUploads:"par nom de fichier",settingsTemplates:"toujours écrasés"},replaceExisting:"Remplacer existant",keepExisting:"Garder existant",replaceDescription:"Écrase les doublons avec la sauvegarde",keepDescription:"Ne restaure que les éléments absents",caution:"Attention :",cautionText:"L'écrasement remplacera vos réglages. Les codes d'accès imprimantes sont exclus par sécurité.",itemsRestored:"Éléments restaurés",itemsSkipped:"Éléments ignorés",restored:"Restaurés",skipped:"Ignorés (déjà présents)",filesLabel:"Fichiers (3MF, vignettes, etc.)",newApiKeysGenerated:"Nouvelles clés API générées",newApiKeysWarning:"Copiées maintenant, elles ne seront plus visibles !",processingBackup:"Traitement du fichier...",noDataFound:"Aucune donnée trouvée dans le fichier.",failedToRestore:"Échec restaure. Vérifiez le format."},backupExport:{title:"Exporter Sauvegarde",selectData:"Données à inclure",selectAll:"Tout sélectionner",selectNone:"Ne rien sélectionner",categoryDescriptions:{settings:"Langue, thèmes, préférences",notifications:"ntfy, Pushover, Discord, etc.",templates:"Modèles de messages personnalisés",smartPlugs:"Configuration des prises Tasmota",externalLinks:"Liens externes de la barre latérale",printers:"Infos imprimantes (codes d'accès exclus par défaut)",plateDetection:"Images références des plateaux vides",filaments:"Types et coûts filaments",maintenance:"Plannings de maintenance personnalisés",archives:"Données impressions + fichiers (3MF, vignettes, etc.)",projects:"Projets, BOM, pièces jointes",pendingUploads:"En attente revue virtuelle",apiKeys:"Clés Webhook (nouvelles clés générées à l'import)"},requiresPrinters:"Nécessite sélection des imprimantes",zipFileWarning:"Fichier ZIP créé.",zipFileDescription:"Contient tous les médias. Peut être volumineux.",includeAccessCodes:"Inclure Codes d'accès",includeAccessCodesDescription:"Pour migrer vers une autre machine",includeAccessCodesWarning:"Codes en texte clair. Sécurisez ce fichier !",categoriesSelected:"{{selectedCount}} catégories choisies"},pendingUploads:{placeholders:{notes:"Notes sur l'impression..."},discardUpload:"Rejeter",archiveAllUploads:"Tout archiver",discardAllUploads:"Tout rejeter",archive:"Archiver",timeAgo:{justNow:"À l'instant",minutesAgo:"Il y a {{minutes}}m",hoursAgo:"Il y a {{hours}}h",daysAgo:"Il y a {{days}}j"}},apiBrowser:{placeholders:{requestBody:"Corps JSON...",searchEndpoints:"Chercher endpoints..."}},configureAmsSlot:{title:"Configurer le slot AMS",slotConfigured:"Slot configuré !",configuringSlot:"Configuration du slot :",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Chercher presets...",colorPlaceholder:"Nom couleur ou hex (ex: brown, FF8800)",clearCustomColor:"Effacer couleur perso",noCloudPresets:"Profils Cloud absents. Connectez-vous.",noPresetsAvailable:"Aucun preset disponible. Connectez-vous à Bambu Cloud ou importez des profils locaux.",noMatchingPresets:"Aucun profil trouvé.",custom:"Perso",builtin:"Inclus",settingsSentToPrinter:"Réglages envoyés",filamentProfile:"Profil Filament",kProfileLabel:"Profil K (Pressure Advance)",filteringFor:"Filtrage pour : {{material}}",noKProfile:"Pas de profil K (utiliser défaut 0.020)",noMatchingKProfiles:"Aucun profil K trouvé. K=0.020 par défaut sera utilisé.",selectFilamentFirst:"Sélectionnez d'abord un profil filament",kFromCalibration:"K={{value}} de la calibration imprimante",customColorLabel:"Couleur personnalisée (optionnel)",presetColors:"Couleurs {{name}} :",showLessColors:"Moins de couleurs",showMoreColors:"Plus de couleurs",clear:"Effacer",hexLabel:"Hex : #{{hex}}",resetting:"Réinitialisation...",resetSlot:"Réinitialiser le slot",cancel:"Annuler",configuring:"Configuration...",configureSlot:"Configurer le slot"},githubBackup:{title:"Sauvegarde GitHub",history:"Historique",downloadBackup:"Télécharger",restoreBackup:"Restaurer",noBackupsYet:"Aucune sauvegarde"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Chercher tags...",renameTag:"Renommer tag",deleteTag:"Supprimer tag"},notificationTemplates:{placeholders:{title:"Titre notification...",body:"Message notification..."}},batchTag:{placeholders:{newTag:"Nouveau tag..."}},photoGallery:{deletePhoto:"Supprimer photo"},filamentHoverCard:{copySpoolUuid:"Copier UUID bobine"},kProfilesView:{hasNote:"A une note",copyProfile:"Copier profil"},layout:{openMenu:"Ouvrir menu",noPermissionSystemInfo:"Pas d'autorisation système"},dashboard:{dragToReorder:"Glisser pour réorganiser",hideWidget:"Masquer widget"},notificationProviderCard:{deleteNotificationProvider:"Supprimer fournisseur"},fileManagerModal:{closeFileManager:"Fermer gestionnaire",sortFiles:"Trier fichiers",goToParentFolder:"Dossier parent",threeView:"Vue 3D"},embeddedCameraViewer:{refreshStream:"Actualiser flux",close:"Fermer",zoomOut:"Zoom -",resetZoom:"Reset zoom",zoomIn:"Zoom +",dragToResize:"Glisser pour dimension"},timelapseViewer:{skipBack5s:"-5s",skipForward5s:"+5s"},notificationProviders:{descriptions:{email:"Notifications par email SMTP",telegram:"Via bot Telegram",discord:"Via webhook Discord",ntfy:"Push auto-hébergé (ntfy)",pushover:"Push fiable (Pushover)",callmebot:"WhatsApp gratuit via CallMeBot",webhook:"Requête HTTP POST personnalisée"}},logViewer:{searchPlaceholder:"Message ou nom...",noLogEntries:"Aucune entrée journal"},switchbarPopover:{noSwitchesInSwitchbar:"Aucun interrupteur"},projectPageModal:{placeholders:{title:"Titre",designer:"Designer",license:"Licence",description:"Description...",profileTitle:"Titre du profil",profileDescription:"Description du profil..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"En attente",justNow:"À l'instant",now:"Maintenant",minsAgo:"il y a {{count}}m",inMins:"dans {{count}}m",hoursAgo:"il y a {{count}}h",inHours:"dans {{count}}h",daysAgo:"il y a {{count}}j",inDays:"dans {{count}}j"},spoolbuddy:{nav:{dashboard:"Tableau de bord",ams:"AMS",inventory:"Inventaire",writeTag:"Écrire",settings:"Paramètres"},status:{nfcReady:"NFC prêt",nfcOff:"NFC désactivé",offline:"Hors ligne",online:"En ligne",noPrinters:"Aucune imprimante",deviceOffline:"Appareil hors ligne",waitingConnection:"En attente de connexion...",systemReady:"Système prêt",status:"Statut"},dashboard:{readyToScan:"Prêt à scanner",idleMessage:"Placez une bobine sur la balance pour l'identifier",nfcHint:"Le tag NFC sera lu automatiquement",device:"Appareil",syncWeight:"Sync. poids",weightSynced:"Synchronisé !",unknownTag:"Tag inconnu",newTag:"Nouveau tag détecté",onScale:"sur la balance",linkSpool:"Lier à une bobine",linkTagTitle:"Lier le tag à une bobine",linkTag:"Lier le tag",selectSpool:"Sélectionnez une bobine à lier à ce tag :",noUntagged:"Aucune bobine sans tag trouvée",tagDetected:"Tag détecté",noTag:"Pas de tag",tagId:"Tag",grossWeight:"Poids brut",spoolSize:"Taille bobine",close:"Fermer",currentSpool:"Bobine actuelle",plateReady:"Plateau prêt : {{name}}",plateReadyLabel:"Plateaux à libérer",plateClearAction:"Libérer",plateClearedToast:"Plateau marqué comme libéré",plateClearFailed:"Impossible de marquer le plateau comme libéré"},modal:{spoolDetected:"Bobine détectée",assignToAms:"Assigner à l'AMS",syncWeight:"Synchroniser le poids",weightSynced:"Synchronisé !",syncing:"Synchronisation...",newTagDetected:"Nouveau tag détecté",addToInventory:"Ajouter à l'inventaire",assignToAmsTitle:"Assigner à l'AMS",selectSlot:"Sélectionner un emplacement",assign:"Assigner",assigning:"Attribution...",assignSuccess:"Assigné !",assignError:"Échec de l'attribution de la bobine. Veuillez réessayer.",noPrinterSelected:"Sélectionner une imprimante...",noAmsDetected:"Aucun AMS détecté sur cette imprimante",slot:"Emplacement"},weight:{noReading:"Pas de lecture",stable:"Stable",measuring:"Mesure...",tare:"Tarer",calibrate:"Calibrer"},spool:{remaining:"Restant",material:"Matériau",brand:"Marque",color:"Couleur",coreWeight:"Noyau",labelWeight:"Étiquette",scaleWeight:"Balance",netWeight:"Net",lastUsed:"Dernière utilisation"},ams:{noData:"Aucun AMS détecté",connectAms:"Connectez un AMS pour voir les slots",noPrinter:"Aucune imprimante sélectionnée",selectPrinter:"Sélectionnez une imprimante dans la barre supérieure",printerDisconnected:"Imprimante déconnectée",humidity:"Humidité",level:"Niveau",active:"Actif",slot:"Slot",empty:"Vide"},inventory:{search:"Rechercher des bobines...",empty:"Aucune bobine dans l'inventaire",noResults:"Aucune bobine correspondante",spools:"bobines",addSpool:"Ajouter une bobine"},settings:{tabDevice:"Appareil",tabDisplay:"Affichage",tabScale:"Balance",tabUpdates:"Mises à jour",nfcReader:"Lecteur NFC",type:"Type",connection:"Connexion",notConnected:"N/A",deviceInfo:"Info appareil",hostname:"Hôte",uptime:"Temps de fonctionnement",brightness:"Luminosité",saved:"Enregistré",noBacklight:"Aucun rétroéclairage DSI détecté. Le contrôle de luminosité nécessite un écran DSI.",screenBlank:"Délai d'extinction",screenBlankDesc:"L'écran s'éteint après inactivité. Touchez pour réveiller.",displayNote:"La luminosité est appliquée comme filtre logiciel.",scaleCalibration:"Calibration de la balance",currentWeight:"Poids actuel",tareOffset:"Tare",calFactor:"Facteur",knownWeight:"Poids connu",calStep1:"Retirez tout de la balance et appuyez sur Mettre à zéro.",calStep2:"Placez le poids connu sur la balance.",setZero:"Mettre à zéro",calibrateNow:"Calibrer",calibrated:"Calibré",tareSet:"Commande de tare envoyée. En attente de l'appareil...",tareFailed:"Échec de l'envoi de la commande de tare",zeroSet:"Point zéro défini. Placez le poids connu sur la balance.",calibrationDone:"Calibration terminée !",calibrationFailed:"Échec de la calibration",lastCalibrated:"Dernière calibration",stable:"Stable",settling:"Stabilisation...",firmware:"Firmware",scale:"Balance",noDevice:"Aucun appareil SpoolBuddy trouvé",daemonVersion:"Version du daemon",currentVersion:"Actuelle",versionPending:"En attente du daemon...",checking:"Vérification...",checkUpdates:"Vérifier les mises à jour",updateAvailable:"Mise à jour disponible",updateInstructions:"Mise à jour via SSH : exécutez le script d'installation SpoolBuddy.",upToDate:"À jour",includeBeta:"Inclure les versions bêta",systemConfig:"Backend & authentification",backendUrl:"URL du backend Bambuddy",apiToken:"Jeton d'API",apiTokenPlaceholder:"Saisir un jeton d'API",saveConfig:"Enregistrer la configuration",systemQueued:"Configuration mise en file.",systemFieldsRequired:"L'URL du backend est obligatoire.",nfcDiagnostic:"Diagnostic NFC",scaleDiagnostic:"Diagnostic balance",readTagDiagnostic:"Diagnostic lecture de tag",testNfc:"Tester le lecteur",testScale:"Tester la précision",testReadTag:"Lire un tag"},writeTag:{tabExisting:"Bobine existante",tabNew:"Nouvelle bobine",tabReplace:"Remplacer le tag",searchPlaceholder:"Rechercher par matériau, couleur, marque...",noUntaggedSpools:"Aucune bobine sans tag",noTaggedSpools:"Aucune bobine avec tag",selectSpool:"Sélectionnez une bobine, puis placez un NTAG sur le lecteur",placeTag:"Placez un NTAG sur le lecteur",tagReady:"Tag détecté — prêt à écrire",writeTag:"Écrire le tag",replaceTag:"Remplacer le tag",writing:"Écriture du tag...",waiting:"En attente de SpoolBuddy...",writeSuccess:"Tag écrit avec succès !",writeFailed:"Échec de l'écriture",queueFailed:"Impossible de mettre en file la commande d'écriture",tryAgain:"Réessayer",cancel:"Annuler",replaceWarning:"L'ancien tag sera dissocié. Le nouveau tag le remplacera.",deviceOffline:"SpoolBuddy est hors ligne",material:"Matériau",colorName:"Nom de la couleur",color:"Couleur",brand:"Marque",weight:"Poids (g)",createSpool:"Créer la bobine",creating:"Création...",spoolCreated:"Bobine créée ! Prêt à écrire.",createFailed:"Impossible de créer la bobine"},quickMenu:{printerPower:"Alimentation imprimante",systemControls:"Système",restartDaemon:"Redémarrer le daemon",restartBrowser:"Redémarrer le navigateur",reboot:"Redémarrer",shutdown:"Éteindre",swipeToClose:"Glisser vers le bas pour fermer",confirmTitle:"Confirmer",confirmShutdown:"Êtes-vous sûr de vouloir éteindre le SpoolBuddy ? Vous aurez besoin d'un accès physique pour le rallumer.",confirmReboot:"Êtes-vous sûr de vouloir redémarrer le SpoolBuddy ?",confirmRestartDaemon:"Redémarrer le daemon SpoolBuddy ? Le NFC et la balance seront temporairement indisponibles.",confirmRestartBrowser:"Redémarrer le navigateur kiosque ? L'écran sera brièvement noir.",confirm:"Confirmer",confirmPlugOn:"Allumer {{name}} ?",confirmPlugOff:"Éteindre {{name}} ?",turnOn:"Allumer",turnOff:"Éteindre"}},bugReport:{title:"Signaler un bug",description:"Description",descriptionPlaceholder:"Qu'est-ce qui n'a pas fonctionné ? Veuillez décrire le problème...",email:"E-mail (optionnel)",emailPlaceholder:"votre@email.fr",emailPrivacy:"Si fourni, votre e-mail sera inclus dans une section repliée de l'issue GitHub pour que le mainteneur puisse vous contacter.",screenshot:"Capture d'écran",uploadOrPaste:"Télécharger, coller ou glisser une image",dataCollectedSummary:"Quelles données sont incluses dans le rapport ?",dataIncluded:"Inclus :",dataIncludedList:"Version de l'app, OS, architecture, version Python, statistiques de base de données (compteurs uniquement), modèles d'imprimantes, nombre de buses, versions firmware, état de connexion, état des intégrations (Spoolman, MQTT, HA), paramètres non sensibles, nombre d'interfaces réseau, détails Docker, versions des dépendances.",dataNeverIncluded:"Jamais inclus :",dataNeverIncludedList:"Noms d'imprimantes, numéros de série, codes d'accès, mots de passe, adresses IP, adresses e-mail, clés API, tokens, URLs de webhook, noms d'hôtes ou noms d'utilisateurs.",submit:"Envoyer",startLogging:"Lancer la journalisation",stepEnableLogging:"Journalisation activée",stepReproduce:"Reproduisez le problème",stepStopLogging:"Arrêter & envoyer",stopAndSubmit:"Arrêter & Envoyer",maxDuration:"Arrêt auto après {{minutes}} min",stoppingLogs:"Collecte des journaux & envoi...",submitting:"Envoi du rapport de bug...",submitSuccess:"Rapport de bug envoyé avec succès !",submitFailed:"Échec de l'envoi du rapport de bug",thankYou:"Merci !",submitted:"Votre rapport de bug a été soumis.",viewIssue:"Voir l'issue",unexpectedError:"Une erreur inattendue est survenue"},failureDetection:{title:"Détection d'échec par IA",description:"Surveille les impressions via une API ML Obico auto-hébergée et agit automatiquement sur les échecs détectés.",mlUrl:"URL de l'API ML Obico",mlUrlHint:"URL de base de votre conteneur Obico ml_api auto-hébergé (ex. http://192.168.1.10:3333).",test:"Tester",testSuccess:"API ML accessible et fonctionnelle.",testFailed:"Impossible d'atteindre l'API ML.",sensitivity:"Sensibilité",sensitivityLow:"Basse (moins de faux positifs)",sensitivityMedium:"Moyenne (équilibrée)",sensitivityHigh:"Haute (détection précoce, plus de faux positifs)",sensitivityHint:"Ajuste les seuils de confiance qui déclenchent les avertissements et les échecs.",action:"Action sur échec détecté",actionNotify:"Notifier uniquement",actionPause:"Mettre en pause",actionPauseOff:"Pause et couper l'alimentation",pollInterval:"Intervalle de vérification (secondes)",pollIntervalHint:"Fréquence de vérification de chaque imprimante pendant l'impression. Minimum 5s, maximum 120s.",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"Imprimantes surveillées",perPrinterHint:"Choisissez quelles imprimantes le service de détection surveille.",monitorAll:"Surveiller toutes les imprimantes connectées",statusTitle:"Statut",serviceRunning:"Service en cours d'exécution",thresholds:"Seuils bas / haut",activePrinters:"Impressions actives",noActivePrints:"Aucune impression en cours.",historyTitle:"Détections récentes",noHistory:"Aucune détection pour le moment."},makerworld:{title:"MakerWorld",description:"Collez une URL de modèle MakerWorld pour l'importer et l'imprimer directement depuis Bambuddy — sans passer par l'application Bambu Handy.",pasteUrlHeader:"Importer depuis MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… ou collez n'importe quel lien MakerWorld",resolveButton:"Résoudre",signInRequiredTitle:"Connexion Bambu Cloud requise pour télécharger",signInRequiredBody:"Vous pouvez consulter les détails du modèle anonymement, mais MakerWorld nécessite un compte Bambu Cloud pour télécharger les fichiers 3MF.",openCloudSettings:"Ouvrir les paramètres Cloud",untitledModel:"Modèle sans titre",byCreator:"par {{name}}",downloadsCount:"{{count}} téléchargements",licensePrefix:"Licence",alreadyImported:"Déjà dans la bibliothèque",openOnMakerworld:"Ouvrir sur MakerWorld",alreadyInLibrary:"Ce modèle est déjà dans votre bibliothèque — retrouvez-le dans Gestionnaire de fichiers → MakerWorld",importSuccess:"{{filename}} importé — enregistré dans Gestionnaire de fichiers → MakerWorld",platesHeader:"Plateaux ({{count}})",plateDefaultName:"Plateau {{n}}",materialCount:"{{count}} filaments",amsRequired:"AMS requis",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"Enregistrer",sliceIn:"Enregistrer et découper dans {{slicer}}",disclaimer:"L'intégration MakerWorld utilise des points de terminaison API documentés par la communauté. Bambuddy n'est ni affilié ni approuvé par MakerWorld ou Bambu Lab.",lastImportSuccess:"Importé dans votre bibliothèque",lastImportAlreadyInLibrary:"Déjà dans votre bibliothèque",viewInLibrary:"Voir dans le Gestionnaire de fichiers",openInBambuStudio:"Ouvrir dans Bambu Studio",openInOrcaSlicer:"Ouvrir dans OrcaSlicer",importTo:"Importer dans le Gestionnaire de fichiers",recentImportsHeader:"Imports récents",phaseResolving:"Résolution",phaseDownloading:"Téléchargement",folderAuto:"MakerWorld (par défaut)",importAll:"Tout importer",importAllProgress:"Importation de {{current}}/{{total}}",openGallery:"Ouvrir la galerie d'images",galleryPrev:"Image précédente",galleryNext:"Image suivante",deleteImport:"Retirer de la bibliothèque",importDeleting:"Suppression…",importDeleted:"Retiré de la bibliothèque",confirmDelete:"Retirer {{filename}} de la bibliothèque ? Le fichier local est supprimé, mais la plaque peut être ré-importée depuis MakerWorld.",errors:{resolveFailed:"Impossible de résoudre cette URL MakerWorld.",downloadFailed:"Le téléchargement a échoué. Veuillez réessayer.",deleteFailed:"Impossible de retirer le fichier de la bibliothèque."}},libraryTrash:{title:"Corbeille",headerButton:"Corbeille",headerTooltip:"Voir les fichiers déplacés dans la corbeille",backToFiles:"Retour au gestionnaire de fichiers",subtitleAdmin:"Les fichiers supprimés restent ici pendant {{days}} jours, puis sont supprimés automatiquement. Cette vue affiche la corbeille de tous les utilisateurs.",subtitleUser:"Les fichiers supprimés restent ici pendant {{days}} jours, puis sont supprimés automatiquement.",loading:"Chargement de la corbeille…",loadError:"Impossible de charger la corbeille.",empty:"La corbeille est vide.",summary:"{{count}} fichiers · {{size}}",emptyTrash:"Vider la corbeille",restore:"Restaurer",purgeNow:"Supprimer maintenant",autoPurgeIn:"Suppression automatique dans {{when}}",days:"jours",retentionLabel:"Supprimer automatiquement après",selectAll:"Tout sélectionner",selectOne:"Sélectionner {{filename}}",selectionCount:"{{count}} sélectionné(s)",bulkRestore:"Restaurer la sélection",bulkPurge:"Supprimer la sélection",col:{filename:"Fichier",folder:"Dossier",size:"Taille",deleted:"Mis à la corbeille",autoPurge:"Suppression auto.",owner:"Propriétaire",actions:"Actions"},confirm:{purgeTitle:"Supprimer définitivement ?",purgeBody:"{{filename}} sera supprimé du disque et ne pourra pas être restauré.",emptyTitle:"Vider la corbeille ?",emptyBody:"Tous les {{count}} fichiers seront supprimés du disque. Cette action est irréversible.",bulkPurgeTitle:"Supprimer définitivement les fichiers sélectionnés ?",bulkPurgeBody:"Les {{count}} fichiers sélectionnés seront supprimés du disque et ne pourront pas être restaurés.",cta:"Supprimer définitivement"},toast:{restored:"Fichier restauré.",restoreFailed:"Impossible de restaurer le fichier.",purged:"Fichier supprimé définitivement.",purgeFailed:"Impossible de supprimer le fichier.",emptied:"{{count}} fichier(s) supprimé(s) de la corbeille.",emptyFailed:"Impossible de vider la corbeille.",retentionSaved:"Suppression automatique réglée sur {{days}} jours.",retentionFailed:"Impossible d'enregistrer le réglage de rétention.",bulkRestored:"{{count}} fichier(s) restauré(s).",bulkPurged:"{{count}} fichier(s) supprimé(s)."}},libraryPurge:{title:"Purger les anciens fichiers",headerButton:"Purger",headerTooltip:"Déplacer en masse les anciens fichiers vers la corbeille",description:"Les fichiers plus anciens que le seuil seront déplacés vers la corbeille. Les dossiers externes sont ignorés. Vous pouvez restaurer depuis la corbeille avant la suppression automatique.",ageLabel:"Déplacer les fichiers plus anciens que",days:"jours",includeNeverPrinted:"Inclure les fichiers jamais imprimés",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"Vérification du nombre de fichiers concernés…",previewFailed:"Impossible de prévisualiser la purge.",previewSummary:"{{count}} fichiers · {{size}} seraient déplacés vers la corbeille",andMore:"…et {{count}} de plus",warning:"Les fichiers sont supprimés en douceur — vous pouvez les restaurer depuis la corbeille jusqu'à l'expiration de la période de rétention.",confirmCta:"Déplacer {{count}} vers la corbeille",purging:"Déplacement vers la corbeille…",toast:{success:"{{count}} fichier(s) déplacé(s) vers la corbeille.",failed:"Impossible de purger les fichiers."}},libraryAutoPurge:{enableLabel:"Purge automatique des anciens fichiers",enableDescription:"Exécute la purge administrateur une fois par jour. Les fichiers sont d'abord déplacés vers la corbeille — ils ne sont pas supprimés immédiatement.",ageLabel:"Purger automatiquement les fichiers plus anciens que",ageDescription:"Minimum 7 jours, maximum 10 ans. Utilise la même règle d'ancienneté que le bouton Purger manuel.",days:"jours",includeNeverPrinted:"Inclure les fichiers jamais imprimés",saveFailed:"Impossible d'enregistrer les paramètres de purge automatique."},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},Sme={nav:{printers:"プリンター",archives:"アーカイブ",queue:"キュー",stats:"統計",profiles:"プロファイル",maintenance:"メンテナンス",projects:"プロジェクト",inventory:"フィラメント",files:"ファイル管理",makerworld:"MakerWorld",notifications:"通知",settings:"設定",system:"システム",collapseSidebar:"サイドバーを閉じる",expandSidebar:"サイドバーを開く",update:"アップデート",updateAvailable:"アップデートあり: v{{version}}",updateAvailableBanner:"バージョン {{version}} が利用可能です！",viewUpdate:"アップデートを表示",viewOnGithub:"GitHubで表示",keyboardShortcuts:"キーボードショートカット (?)",switchToLight:"ライトモードに切替",switchToDark:"ダークモードに切替",smartSwitches:"スマートスイッチ",logout:"ログアウト"},common:{save:"保存",saving:"保存中...",cancel:"キャンセル",delete:"削除",edit:"編集",add:"追加",close:"閉じる",confirm:"確認",loading:"読み込み中...",error:"エラー",success:"成功",warning:"警告",enabled:"有効",disabled:"無効",yes:"はい",no:"いいえ",on:"オン",off:"オフ",all:"すべて",none:"なし",search:"検索",filter:"フィルター",sort:"並べ替え",refresh:"更新",download:"ダウンロード",upload:"アップロード",uploading:"アップロード中...",uploadFailed:"アップロード失敗",actions:"操作",status:"ステータス",name:"名前",description:"説明",date:"日付",time:"時間",hours:"時間",minutes:"分",seconds:"秒",days:"日",enable:"有効化",disable:"無効にする",permissions:"権限",noPrinters:"プリンターが登録されていません",noData:"データがありません",linkNotFound:"リンクが見つかりません",required:"必須",optional:"オプション",dismiss:"閉じる",apply:"適用",reset:"リセット",export:"エクスポート",import:"インポート",clear:"クリア",selectAll:"すべて選択",deselectAll:"すべて選択解除",noChange:"— 変更なし —",unchanged:"変更なし",unassigned:"未割当",unknown:"不明",unknownError:"不明なエラー",today:"今日",tomorrow:"明日",asap:"即時",overdue:"期限超過",now:"今すぐ",collapse:"折りたたむ",expand:"展開",viewArchive:"アーカイブを表示",viewInFileManager:"ファイルマネージャーで表示",addedBy:"{{username}}が追加",prints:"プリント",more:"+{{count}}件",ascending:"昇順",descending:"降順",back:"戻る",copy:"コピー",copied:"コピーしました!",printer:"プリンター",remove:"削除",type:"種類",print:"印刷",rename:"名前変更",move:"移動",create:"作成",duplicate:"複製",left:"左",right:"右"},printers:{title:"プリンター",addPrinter:"プリンターを追加",editPrinter:"プリンターを編集",deletePrinter:"プリンターを削除",printerName:"プリンター名",serialNumber:"シリアル番号",ipAddress:"IPアドレス / ホスト名",accessCode:"アクセスコード",model:"モデル",nozzleCount:"ノズル数",autoArchive:"自動アーカイブ",status:{available:"利用可能",idle:"待機中",printing:"印刷中",paused:"一時停止",offline:"オフライン",problem:"問題",error:"エラー",finished:"完了",unknown:"不明"},temperatures:{nozzle:"ノズル",bed:"ベッド",chamber:"チャンバー"},progress:"{{percent}}% 完了",timeRemaining:"残り {{time}}",deleteConfirm:"「{{name}}」を削除しますか？",maintenanceOk:"メンテナンス正常",maintenanceWarning:"{{count}}件の警告",maintenanceWarning_plural:"{{count}}件の警告",maintenanceDue:"{{count}}件のメンテナンス期限",maintenanceDue_plural:"{{count}}件の期限",sort:{name:"名前",status:"ステータス",model:"モデル",location:"ロケーション",ascending:"昇順で並べ替え",descending:"降順で並べ替え"},cardSize:{small:"小",medium:"中",large:"大",extraLarge:"特大"},hideOffline:"オフラインを非表示",nextAvailable:"次に完了",powerOn:"電源オン",offlinePrintersWithPlugs:"スマートプラグ付きオフラインプリンター",noPrintersConfigured:"プリンターが設定されていません",search:"プリンターを検索...",noSearchResults:"検索またはフィルターに一致するプリンターがありません",filter:{allStatuses:"すべてのステータス",allLocations:"すべての場所"},readyToPrint:"印刷可能",external:"外部",extL:"Ext-L",extR:"Ext-R",deleteArchives:"印刷アーカイブを削除",noLabel:"ラベルなし",printPreview:"印刷プレビュー",width:"幅",height:"高さ",noObjectsFound:"オブジェクトが見つかりません",objectsLoadedOnPrintStart:"オブジェクトは印刷開始時に読み込まれます",willBeSkipped:"スキップされます",name:"名前",serialCannotBeChanged:"シリアル番号は変更できません",locationHelp:"プリンターのグループ化とキュージョブのフィルタリングに使用",wifiSignal:{veryWeak:"非常に弱い",weak:"弱い",fair:"注意",good:"良好",excellent:"非常に良い"},maintenanceUpToDate:"すべてのメンテナンスが最新です",chamberLightOn:"チャンバーライトをオンにしました",chamberLightOff:"チャンバーライトをオフにしました",files:"ファイル",browseFiles:"プリンターのファイルを参照",autoOffAfterPrint:"印刷後に自動電源オフ",autoOffExecuted:"自動オフが実行されました - リセットするにはプリンターの電源を入れてください",hmsErrors:"クリックしてHMSエラーを表示",viewHmsErrors:"{{count}}件のHMSエラーを表示",resume:"再開",pause:"一時停止",stop:"停止",camera:"カメラ",skipObject:"オブジェクトスキップ",reconnect:"再接続",forceRefresh:"強制更新",forceRefreshSuccess:"更新をリクエストしました",mqttDebug:"MQTTデバッグ",printerInformation:"プリンター情報",copyToClipboard:"コピー",copied:"コピーしました！",state:"状態",wifiSignalLabel:"WiFi信号",developerMode:"開発者モード",enabled:"有効",disabled:"無効",addedOn:"追加日",sdCard:"SDカード",inserted:"挿入済み",notInserted:"未挿入",totalPrintHours:"印刷時間",activeNozzle:"アクティブ: {{nozzle}}ノズル",nozzleRack:"ノズルラック",nozzleDocked:"ドッキング中",nozzleMounted:"マウント中",nozzleActive:"アクティブ",nozzleIdle:"アイドル",nozzleDiameter:"直径",nozzleType:"タイプ",nozzleStatus:"ステータス",nozzleFilament:"フィラメント",nozzleWear:"摩耗",nozzleMaxTemp:"最高温度",nozzleSerial:"シリアル",nozzleHardenedSteel:"焼入れ鋼",nozzleStainlessSteel:"ステンレス鋼",nozzleTungstenCarbide:"タングステンカーバイド",nozzleFlow:"フロー",nozzleHighFlow:"ハイフロー",nozzleStandardFlow:"スタンダード",firmwareUpdate:"ファームウェアアップデート",firmwareInstructions:"プリンターのタッチスクリーンで",firmwareNav:"に移動",settings:"設定",firmware:"ファームウェア",discoverPrinters:"プリンターを検出",searching:"検索中...",manualEntry:"手動入力",addFromCloud:"クラウドから追加",toast:{printerDeleted:"プリンターを削除しました",missingSpoolAssignment:"{{printer}}で印刷を開始しました。以下のスプール割り当てがありません: {{slots}}",printerAdded:"プリンターを追加しました",printerUpdated:"プリンターを更新しました",failedToDelete:"プリンターの削除に失敗しました",failedToAdd:"プリンターの追加に失敗しました",failedToUpdate:"プリンターの更新に失敗しました",commandSent:"コマンドを送信しました",failedToSendCommand:"コマンドの送信に失敗しました",turnedOn:"{{name}} の電源をオンにしました",failedToPowerOn:"{{name}} の電源オンに失敗しました",scriptTriggered:"スクリプトを実行しました",printStopped:"印刷を停止しました",printPaused:"印刷を一時停止しました",printResumed:"印刷を再開しました",referenceDeleted:"リファレンスを削除しました",detectionAreaSaved:"検出エリアを保存しました",failedToRunScript:"スクリプトの実行に失敗しました",failedToStopPrint:"印刷の停止に失敗しました",failedToPausePrint:"印刷の一時停止に失敗しました",failedToResumePrint:"印刷の再開に失敗しました",failedToControlChamberLight:"チャンバーライトの制御に失敗しました",failedToSetSpeed:"印刷速度の設定に失敗しました",failedToUpdateSetting:"設定の更新に失敗しました",failedToSkipObjects:"オブジェクトのスキップに失敗しました",failedToRereadRfid:"RFIDの再読み取りに失敗しました",failedToCheckPlate:"プレートの確認に失敗しました",failedToUpdateLabel:"ラベルの更新に失敗しました",failedToDeleteReference:"リファレンスの削除に失敗しました",failedToSaveDetectionArea:"検出エリアの保存に失敗しました",plateCheckEnabled:"プレートチェックを有効にしました",plateCheckDisabled:"プレートチェックを無効にしました",calibrationSaved:"キャリブレーションを保存しました！",calibrationFailed:"キャリブレーションに失敗しました",rfidRereadInitiated:"RFID再読み取りを開始しました"},connection:{connected:"接続中",offline:"オフライン"},plateStatus:{markCleared:"プレートをクリア済みにする",cleared:"プレートクリア済み",notCleared:"プレート未クリア",inUse:"プレート使用中"},queue:{inQueue:"キュー内 {{count}} 件",inQueue_plural:"{{count}}件がキュー内"},controls:"コントロール",rfid:{reread:"RFID再読み取り"},bedJog:{title:"ビルドプレートを移動",bed:"ベッド",step:"ステップ (mm)",up:"プレートを上へ",down:"プレートを下へ",disabledWhilePrinting:"印刷中は無効",notHomedTitle:"プリンターがホーミングされていません",notHomedMessage:"前回の印刷以降、プリンターがホーミングされていません。安全な位置決めのためにまずオートホーミングを実行するか（ツールヘッドをパークしてからX・Y・Zをホーミングします）、このまま移動してください — ソフトエンドストップはバイパスされます。",homeZ:"オートホーミング",moveAnyway:"このまま移動",homingStarted:"プリンターをオートホーミング中…"},permission:{noAdd:"プリンターを追加する権限がありません",noEdit:"プリンターを編集する権限がありません",noDelete:"プリンターを削除する権限がありません",noControl:"プリンターを制御する権限がありません",noFiles:"このディレクトリにファイルがありません",noAmsRfid:"AMS RFIDを再読み取りする権限がありません",noSmartPlugControl:"スマートプラグを制御する権限がありません",noCamera:"カメラを表示する権限がありません"},modal:{addTitle:"プリンターを追加",editTitle:"プリンターを編集",myPrinter:"マイプリンター",selectModel:"モデルを選択...",locationGroup:"ロケーション / グループ",locationPlaceholder:"例: 工房、オフィス、地下室",autoArchiveLabel:"完了した印刷を自動アーカイブ",fromPrinterSettings:"プリンターの設定から取得",modelOptional:"モデル（任意）",saveChanges:"変更を保存"},skipObjects:{tooltip:"オブジェクトスキップ",onlyWhilePrinting:"オブジェクトスキップ（印刷中のみ）",requiresMultiple:"オブジェクトスキップ（2個以上必要）",title:"オブジェクトスキップ",matchIdsInfo:"プリンター画面のIDと照合してください",printerShowsIds:"プリンター画面にビルドプレート上のオブジェクトIDが表示されます",skipSelected:"選択をスキップ",skipping:"スキップ中...",noObjectsSelected:"オブジェクトが選択されていません",selectObjectsToSkip:"現在の印刷からスキップするオブジェクトを選択してください",skipped:"スキップ済み",objectsSkipped:"オブジェクトをスキップしました",activeCount:"{{count}}個アクティブ",waitForLayer:"オブジェクトをスキップするにはレイヤー2以降をお待ちください（現在レイヤー{{layer}}）",skip:"スキップ",confirmTitle:"オブジェクトをスキップしますか？",confirmMessage:"「{{name}}」をスキップしますか？この操作は元に戻せません。"},confirm:{deleteTitle:"プリンターを削除",deleteMessage:"「{{name}}」を削除しますか？すべての接続設定が削除されます。",deleteArchivesNote:"このプリンターのすべての印刷履歴が完全に削除されます。",keepArchivesNote:"印刷履歴は保持されますが、このプリンターとの関連は解除されます。",stopTitle:"印刷を停止",stopMessage:"「{{name}}」の現在の印刷を停止しますか？印刷ジョブがキャンセルされます。",stopButton:"印刷を停止",pauseTitle:"印刷を一時停止",pauseMessage:"「{{name}}」の現在の印刷を一時停止しますか？",pauseButton:"印刷を一時停止",resumeTitle:"印刷を再開",resumeMessage:"「{{name}}」の印刷を再開しますか？",resumeButton:"印刷を再開",powerOnTitle:"プリンターの電源をオン",powerOnMessage:"「{{name}}」の電源をオンにしますか？",powerOnButton:"電源オン",powerOffTitle:"プリンターの電源をオフ",powerOffMessage:"「{{name}}」の電源をオフにしますか？",powerOffWarning:"警告: 「{{name}}」は現在印刷中です！電源をオフにしますか？印刷が中断され、プリンターが損傷する可能性があります。",powerOffButton:"電源オフ"},bulk:{select:"選択",selectAll:"すべて選択",selectByLocation:"場所で選択",selected:"{{count}}件選択中",actions:{stop:"停止",pause:"一時停止",resume:"再開",clearPlate:"ベッドをクリア",clearHMS:"通知をクリア"},confirm:{stopTitle:"{{count}}件の印刷を停止",stopMessage:"{{count}}台のプリンターのアクティブな印刷をキャンセルします。この操作は元に戻せません。",stopButton:"すべて停止",pauseTitle:"{{count}}件の印刷を一時停止",pauseMessage:"{{count}}台のプリンターのアクティブな印刷を一時停止します。",pauseButton:"すべて一時停止",clearPlateTitle:"{{count}}台のプリントベッドをクリア",clearPlateMessage:"{{count}}台のプリンターのプリントベッドをクリアし、キュー内のジョブが開始される場合があります。",clearPlateButton:"すべてクリア"},success:"{{count}}台のプリンターで{{action}}が完了",partial:"{{succeeded}}件成功、{{failed}}件失敗",noneApplicable:"選択したプリンターにこのアクションに適した状態のものがありません",selectByState:"ステータスで選択"},discovery:{title:"プリンター",searching:"検索中...",scanning:"スキャン中...",scanProgress:"スキャン中... {{scanned}}/{{total}}",foundPrinters:"{{count}}台のプリンターを検出",noPrintersFound:"プリンターが見つかりません",noPrintersFoundSubnet:"指定されたサブネットにプリンターが見つかりません。",noPrintersFoundNetwork:"ネットワーク上にプリンターが見つかりません。",allConfigured:"検出されたすべてのプリンターは既に設定済みです。",alreadyAdded:"追加済み",select:"選択",manualEntry:"手動入力",addFromCloud:"クラウドから追加",subnetToScan:"スキャンするサブネット",dockerNote:"Dockerを検出しました。プリンターのサブネットをCIDR表記で入力してください。docker-compose.ymlでnetwork_mode: hostが必要です。",scanSubnet:"サブネットをスキャンしてプリンターを検出",discoverNetwork:"ネットワーク上のプリンターを検出",scanningSubnet:"サブネットでBambuプリンターをスキャン中...",scanningNetwork:"ネットワークをスキャン中...",serialRequired:"シリアル番号が必要です",unknown:"不明",failedToStart:"印刷の開始に失敗しました"},drying:{start:"乾燥開始",stop:"乾燥停止",temperature:"温度",duration:"時間",hours:"時間",timeRemaining:"残り {{time}}",active:"乾燥中",notSupported:"乾燥非対応",powerRequired:"AMS電源アダプターを接続して乾燥を有効にしてください",startingDrying:"乾燥を開始しています...",stoppingDrying:"乾燥を停止しています...",rotateTray:"乾燥中にスプールを回転"},filaments:"フィラメント",openCameraOverlay:"カメラオーバーレイを開く",openCameraWindow:"カメラを新しいウィンドウで開く",firmwareUpdateAvailable:"ファームウェアアップデートあり: {{current}} → {{latest}}",firmwareUpToDate:"ファームウェア {{version}} — 最新",firmwareUpdateButton:"アップデート",plateDetection:{noPermission:"このページにアクセスする権限がありません。",enabledClick:"プレートチェック有効 - クリックして無効化",disabledClick:"プレートチェック無効 - クリックして有効化",manageCalibration:"プレート検出キャリブレーションを管理",calibrationRequired:"キャリブレーションが必要です",calibrationInstructions:"ビルドプレートが<strong>完全に空</strong>であることを確認してから、キャリブレーションをクリックしてください。",calibrationDescription:"キャリブレーションは空のプレートのリファレンス画像を撮影します。以降のチェックではこのリファレンスと比較してオブジェクトを検出します。",calibrationTip:"<strong>ヒント:</strong> 異なるプレート用に最大5つのキャリブレーションを保存できます。チェック時に最適なものが自動的に使用されます。",plateEmpty:"プレートは空のようです",objectsDetected:"オブジェクトを検出しました",confidence:"信頼度",difference:"差分",analysisPreview:"分析プレビュー:",analysisLegend:"緑の枠 = 検出エリア、赤のオーバーレイ = キャリブレーションとの差分",savedReferences:"保存済みリファレンス ({{count}}/{{max}})",deleteReference:"リファレンスを削除",labelPlaceholder:"ラベル...",clickToEdit:"{{label}} - クリックして編集",clickToAddLabel:"クリックしてラベルを追加"},speed:{title:"印刷速度",silent:"サイレント (50%)",standard:"スタンダード (100%)",sport:"スポーツ (124%)",ludicrous:"ルディクラス (166%)"},airduct:{title:"エアダクトモード",cooling:"冷却",heating:"加熱"},noSdCard:"SDなし",door:{open:"開",closed:"閉"},fans:{partCooling:"パーツ冷却ファン",auxiliary:"補助ファン",chamber:"チャンバーファン"},clickToViewHmsErrors:"クリックしてHMSエラーを表示",estimatedCompletion:"完了予定時刻",plateNumber:"プレート {{number}}",slotOptions:"スロットオプション",amsPopup:{friendlyName:"AMS名",friendlyNamePlaceholder:"例: AMS フレンドリー名",serialNumber:"シリアル番号",firmwareVersion:"ファームウェア",save:"保存",clear:"クリア",noEditPermission:"AMS ユニットの名前を変更する権限がありません"},firmwareModal:{title:"ファームウェアアップデート",titleUpToDate:"ファームウェア情報",currentVersion:"現在のバージョン",latestVersion:"最新バージョン",releaseNotes:"リリースノート",checkingPrereqs:"前提条件を確認中...",sdCardReady:"SDカード準備完了。下をクリックしてファームウェアをアップロードしてください。",uploadedSuccess:"ファームウェアをSDカードにアップロードしました！",applyInstructions:"プリンターでアップデートを適用するには:",step1:"プリンターのタッチスクリーンで設定に移動",step2:"ファームウェアに移動",step3:"SDカードからアップデートを選択",step4:"アップデートには10〜20分かかります",done:"完了",starting:"開始中...",uploadFirmware:"ファームウェアをアップロード",uploadFailed:"アップロード開始に失敗しました: {{error}}",uploadedToast:"ファームウェアをアップロードしました！プリンター画面からアップデートを実行してください。",availableVersions:"利用可能なバージョン",usable:"利用可",unavailable:"利用不可",installed:"インストール済み",newerBadge:"新しい",olderBadge:"古い",currentBadge:"現在"},accessCodePlaceholder:"プリンター設定から取得",roi:{title:"プリンター",xStart:"X開始",yStart:"Y開始",width:"幅",height:"高さ",instruction:"ビルドプレートに焦点を合わせるように検出エリアを調整してください。プレビューの緑の枠が現在のエリアを示しています。"},developerModeWarning:"開発者LANモードが有効になっていません: {{names}}。一部の機能が動作しない可能性があります。",howToEnable:"有効化方法",incompatibleFile:"このファイルは{{slicedFor}}用にスライスされていますが、このプリンターは{{printerModel}}です",dropNotPrintable:".gcodeおよび.gcode.3mfファイルのみ印刷できます",dropToPrint:"ドロップして印刷",cannotPrint:"プリンター使用中"},archives:{title:"印刷アーカイブ",searchPlaceholder:"アーカイブを検索...",filterByPrinter:"プリンターで絞り込み",filterByStatus:"ステータスで絞り込み",sortBy:"並べ替え",sortNewest:"新しい順",sortOldest:"古い順",sortName:"名前順",sortDuration:"時間順",sortLargest:"大きい順",sortSmallest:"小さい順",sortSize:"サイズ",noArchives:"アーカイブが見つかりません",noArchivesSearch:"検索条件に一致するアーカイブがありません",originalPrintNotVisible:"元の印刷が表示されていません - フィルターをクリアしてみてください",noArchivesYet:"アーカイブはまだありません",prints:"件",pagination:{showing:"表示中",to:"〜",of:"/",show:"表示",page:"ページ",all:"すべて"},loadingArchives:"アーカイブを読み込み中...",releaseToUpload:"ドロップしてアップロード",showAll:"すべて表示",showFavoritesOnly:"お気に入りのみ表示",gridView:"グリッド表示",listView:"リスト表示",calendarView:"カレンダー表示",logView:"印刷ログ",manageTags:"タグを管理",showFailedPrints:"失敗した印刷を表示",hideFailedPrints:"失敗した印刷を非表示",hideDuplicates:"重複を非表示",viewOriginalPrint:"クリックして元の印刷を表示 (#{{id}})",printTime:"印刷時間",filamentUsed:"フィラメント使用量",cost:"コスト",reprint:"再印刷",preview:"プレビュー",deleteArchive:"アーカイブを削除",deleteConfirm:"このアーカイブを削除しますか？",favorite:"お気に入り",unfavorite:"お気に入りから削除",viewDetails:"詳細を表示",status:{completed:"完了",failed:"失敗",stopped:"中止"},toast:{source3mfAttached:"ソース3MFを添付しました: {{filename}}",failedUploadSource3mf:"ソース3MFのアップロードに失敗しました",source3mfRemoved:"ソース3MFを削除しました",failedRemoveSource3mf:"ソース3MFの削除に失敗しました",f3dAttached:"F3Dを添付しました: {{filename}}",failedUploadF3d:"F3Dのアップロードに失敗しました",f3dRemoved:"F3Dを削除しました",failedRemoveF3d:"F3Dの削除に失敗しました",timelapseAttached:"タイムラプスを添付しました: {{filename}}",timelapseAlreadyAttached:"タイムラプスは既に添付されています",noMatchingTimelapse:"一致するタイムラプスが見つかりません",failedScanTimelapse:"タイムラプスのスキャンに失敗しました",failedAttachTimelapse:"タイムラプスの添付に失敗しました",timelapseRemoved:"タイムラプスを削除しました",failedRemoveTimelapse:"タイムラプスの削除に失敗しました",timelapseUploaded:"タイムラプスをアップロードしました: {{filename}}",failedUploadTimelapse:"タイムラプスのアップロードに失敗しました",archiveDeleted:"アーカイブを削除しました",failedDeleteArchive:"アーカイブの削除に失敗しました",addedToFavorites:"お気に入りに追加しました",removedFromFavorites:"お気に入りから削除しました",projectUpdated:"プロジェクトを更新しました",failedUpdateProject:"プロジェクトの更新に失敗しました",linkCopied:"リンクをクリップボードにコピーしました",failedCopyLink:"リンクのコピーに失敗しました",photoDeleted:"写真を削除しました",failedDeletePhoto:"写真の削除に失敗しました",failedDeleteArchives:"アーカイブの削除に失敗しました",failedUpdateFavorites:"お気に入りの更新に失敗しました",exportDownloaded:"エクスポートをダウンロードしました",exportFailed:"エクスポートに失敗しました"},menu:{print:"印刷",schedule:"スケジュール",openInBambuStudio:"スライサーで開く",slice:"スライス",externalLink:"外部リンク",viewOnMakerWorld:"MakerWorldで表示",preview3d:"3Dプレビュー",viewTimelapse:"タイムラプスを表示",scanForTimelapse:"タイムラプスをスキャン",uploadTimelapse:"タイムラプスをアップロード",removeTimelapse:"タイムラプスを削除",downloadSource3mf:"ソース3MFをダウンロード",uploadSource3mf:"ソース3MFをアップロード",replaceSource3mf:"ソース3MFを置換",removeSource3mf:"ソース3MFを削除",uploadF3d:"F3Dをアップロード",replaceF3d:"F3Dを置換",downloadF3d:"Fusion 360デザインファイルをダウンロード",removeF3d:"F3Dを削除",download:"ダウンロード",copyDownloadLink:"ダウンロードリンクをコピー",qrCode:"QRコード",viewPhotos:"写真を表示",viewPhotosCount:"写真を表示 ({{count}})",projectPage:"プロジェクトページ",addToFavorites:"お気に入りに追加",removeFromFavorites:"お気に入りから削除",edit:"編集",goToProject:"プロジェクトへ: {{name}}",addToProject:"プロジェクトに追加",removeFromProject:"プロジェクトから削除",loading:"アーカイブを読み込み中...",noProjectsAvailable:"利用可能なプロジェクトがありません",searchProjects:"Search projects…",select:"選択",deselect:"選択解除",delete:"削除"},permission:{noReprint:"このアーカイブを再印刷する権限がありません",noAddToQueue:"キューに追加する権限がありません",noUpdateArchives:"アーカイブを更新する権限がありません",noUploadFiles:"ファイルをアップロードする権限がありません",noDownload:"アーカイブをダウンロードする権限がありません",noCopyLink:"ダウンロードリンクをコピーする権限がありません",noDelete:"このアーカイブを削除する権限がありません",noCreate:"アーカイブを作成する権限がありません"},platePicker:{title:"プレビューするプレートを選択",hint:"このアーカイブには複数のプレートがあります。GCodeビューアで開くプレートを選択してください。",plateLabel:"プレート {{index}}",objectCount:"{{count}} オブジェクト",objectCount_plural:"{{count}} オブジェクト",noGcode:"このアーカイブにはプレビュー可能なスライス済みGコードがありません。まずBambu Studioで開いてスライスしてください。"},card:{previousPlate:"前のプレート",nextPlate:"次のプレート",plateNumber:"プレート {{index}}",moreOptions:"その他のオプション",addToFavorites:"お気に入りに追加",removeFromFavorites:"お気に入りから削除",cancelled:"キャンセル",failed:"失敗",duplicate:"重複",duplicateTitle:"このモデルは以前印刷されています",openSource3mf:"ソース3MFをBambu Studioで開く（右クリックでオプション表示）",downloadF3d:"Fusion 360デザインファイルをダウンロード",viewTimelapse:"タイムラプスを表示",viewPhoto:"写真を表示",viewPhotos:"{{count}}枚の写真を表示",openFolder:"フォルダーを開く: {{name}}",slicedFile:"スライス済みファイル - 印刷可能",sourceFile:"ソースファイルのみ - AMSマッピング不可",gcode:"GCODE",source:"ソース",project:"プロジェクト: {{name}}",estimated:"推定: {{time}}",actual:"実際: {{time}}",accuracy:"精度: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} レイヤー",layers:"{{count}} レイヤー",object:"{{count}}オブジェクト",objects:"{{count}}オブジェクト",slicedFor:"{{model}}用にスライス",uploadedBy:"アップロード者",noPermissionReprint:"再印刷する権限がありません",noFileForReprint:"3MFファイルがありません — 印刷記録時にプリンターからファイルをダウンロードできませんでした",noPermissionEdit:"プロファイルを編集する権限がありません",noPermissionDelete:"アーカイブを削除する権限がありません",reprint:"再印刷",schedulePrint:"印刷をスケジュール",schedule:"スケジュール",openInBambuStudio:"スライサーで開く",openInBambuStudioToSlice:"スライサーでスライス",slice:"スライス",externalLink:"外部リンク",makerWorld:"MakerWorld: {{designer}}",viewProject:"プロジェクトを表示",noExternalLink:"外部リンクなし",preview3d:"3Dプレビュー",download:"ダウンロード",edit:"編集",delete:"削除"},modal:{deleteArchive:"アーカイブを削除",deleteConfirm:'"{{name}}" を削除しますか？この操作は取り消せません。',deleteButton:"削除",removeSource3mf:"ソース3MFを削除",removeSource3mfConfirm:'"{{name}}"からソース3MFファイルを削除してもよろしいですか？元のスライサープロジェクトファイルが削除されます。',removeButton:"削除",removeF3d:"F3Dを削除",removeF3dConfirm:'"{{name}}"からFusion 360デザインファイルを削除してもよろしいですか？',removeTimelapse:"タイムラプスを削除",removeTimelapseConfirm:'"{{name}}"からタイムラプス動画を削除してもよろしいですか？',timelapse:"{{name}} - タイムラプス",selectTimelapse:"タイムラプスを選択",selectTimelapseDesc:"自動一致が見つかりませんでした。この印刷のタイムラプスを選択してください:",deleteArchives:"印刷アーカイブを削除",deleteArchivesConfirm:"{{count}}件のアーカイブを削除しますか？この操作は元に戻せません。",deleteCount:"{{count}}件を削除"},page:{title:"印刷アーカイブ",printsCount:"{{filtered}} / {{total}} 件のプリント",dropFilesHere:".3mfファイルをここにドロップ",releaseToUpload:"ドロップしてアップロード",only3mfSupported:".3mfファイルのみ対応しています",close:"閉じる",selected:"{{count}}件選択中",selectAll:"すべて選択",tags:"タグ",project:"プロジェクト",favorite:"お気に入り",delete:"削除",toggledFavorites:"{{count}}件のアーカイブのお気に入りを切替えました",failedUpdateFavorites:"お気に入りの更新に失敗しました",archivesDeleted:"{{count}}件のアーカイブを削除しました",failedDeleteArchives:"アーカイブの削除に失敗しました",photoDeleted:"写真を削除しました",failedDeletePhoto:"写真の削除に失敗しました"},list:{name:"名前",printer:"プリンター",date:"日付",size:"サイズ",actions:"操作",hasTimelapse:"タイムラプスあり"},log:{date:"日時",printName:"印刷名",printer:"プリンター",user:"ユーザー",status:"ステータス",duration:"所要時間",filament:"フィラメント",allPrinters:"全プリンター",allUsers:"全ユーザー",allStatuses:"全ステータス",cancelled:"キャンセル",skipped:"スキップ",dateFrom:"開始日",dateTo:"終了日",noEntries:"印刷ログが見つかりません",showing:"{{total}}件中{{count}}件を表示",rowsPerPage:"行数",page:"ページ",prev:"前へ",next:"次へ",clearLog:"ログをクリア",clearLogTitle:"印刷ログをクリア",clearLogConfirm:"すべての印刷ログエントリが完全に削除されます。アーカイブとキューアイテムには影響しません。この操作は元に戻せません。よろしいですか？",clearLogButton:"すべてクリア",cleared:"{{count}}件のログエントリを削除しました",clearFailed:"印刷ログの削除に失敗しました"}},queue:{title:"印刷キュー",subtitle:"印刷ジョブのスケジュールと管理",addToQueue:"キューに追加",print:"印刷",reprint:"再印刷",schedulePrint:"印刷をスケジュール",editQueueItem:"キューアイテムを編集",printToPrinters:"{{count}}台のプリンターで印刷",queueToPrinters:"{{count}}台のプリンターでキュー追加",queueSelectedPlates:"{{count}}プレートをキューに追加",selectAllPlates:"全{{count}}プレートを選択",deselectAll:"全て解除",printQueued:"キューに追加しました",itemsQueued:"{{count}}件をキューに追加しました",sending:"送信中...",sendingProgress:"送信中 {{current}}/{{total}}...",adding:"追加中...",addingProgress:"追加中 {{current}}/{{total}}...",savingProgress:"保存中 {{current}}/{{total}}...",clearQueue:"キューをクリア",clearHistory:"履歴をクリア",emptyQueue:"キューは空です",position:"順番",scheduledTime:"予定時刻",moveUp:"上に移動",moveDown:"下に移動",startNow:"今すぐ開始",printingInProgress:"印刷中...",viewArchive:"アーカイブを表示",viewInFileManager:"ファイルマネージャーで表示",itemCount:"{{count}}件",itemCount_plural:"{{count}}件のアイテム",dragToReorder:"ドラッグして並べ替え（ASAPのみ）",reorderHint:"順番はASAPアイテムのみに影響します。スケジュール済みアイテムは設定時刻に実行されます。",sjf:{label:"SJF",tooltip:"短いジョブ優先 — スケジューラーが短い印刷を優先します"},addedBy:"{{name}} が追加",nextInQueue:"次のキュー",clearPlateSuccess:"プレートをクリアしました — 次の印刷の準備完了",plateNumber:"プレート {{index}}",quantity:"数量",quantityHint:"{{count}}件のキューアイテムを作成",activeBatches:"アクティブなバッチ",batchProgress:"{{total}}件中{{completed}}件完了",cancelBatch:"残りをキャンセル",batchCancelled:"残りのバッチアイテムをキャンセルしました",cancelBatchConfirmTitle:"バッチをキャンセル",cancelBatchConfirmMessage:"このバッチの残りの保留中アイテムをすべてキャンセルしますか？",batch:"バッチ",sections:{currentlyPrinting:"印刷中",queued:"キュー中",history:"履歴"},status:{pending:"待機中",waiting:"待機中",printing:"印刷中",paused:"一時停止",completed:"完了",failed:"失敗",skipped:"スキップ",cancelled:"キャンセル済み"},summary:{printing:"印刷中",queued:"キュー中",totalTime:"キュー合計時間",totalWeight:"キュー合計重量",history:"履歴"},filter:{allPrinters:"すべてのプリンター",unassigned:"未割当",allStatus:"すべてのステータス",allLocations:"すべてのロケーション",any:"すべて"},sort:{byPosition:"順番で並べ替え",byName:"名前で並べ替え",byPrinter:"プリンターで並べ替え",bySchedule:"スケジュールで並べ替え",byDate:"日付で並べ替え",ascendingOldest:"昇順（古い順）",descendingNewest:"降順（新しい順）"},badges:{staged:"ステージ済み",requiresPrevious:"前の成功が必要",autoPowerOff:"自動電源オフ",gcodeInjection:"G-code"},empty:{title:"スケジュールされた印刷はありません",description:"アーカイブページのコンテキストメニューから「スケジュール」オプションを使用するか、ファイルをドラッグ＆ドロップして始めましょう。"},time:{asap:"即時",overdue:"期限超過",now:"今すぐ",lessThanMinute:"1分以内",inMinutes:"{{count}}分後",inHours:"{{count}}時間後"},actions:{stopPrint:"印刷を停止",startPrint:"印刷を開始",requeue:"再キュー"},bulkEdit:{title:"{{count}}件のアイテムを編集",title_plural:"{{count}}件のアイテムを編集",description:"変更した設定のみが選択されたアイテムに適用されます。",printer:"プリンター",noChange:"— 変更なし —",queueOptions:"キューオプション",staged:"ステージ済み",autoPowerOff:"印刷後に自動電源オフ",requirePrevious:"前の成功を必要とする",printOptions:"印刷オプション",bedLevelling:"ベッドレベリング",flowCalibration:"フローキャリブレーション",vibrationCalibration:"振動キャリブレーション",layerInspection:"第一層検査",timelapse:"タイムラプス",useAms:"AMS使用",applyChanges:"変更を適用",selectAll:"すべて選択",deselectAll:"すべて選択解除",selected:"{{count}}件選択中",editSelected:"選択を編集",cancelSelected:"選択をキャンセル"},confirm:{cancelTitle:"スケジュール済み印刷をキャンセル",cancelMessage:"「{{name}}」をキャンセルしますか？",stopTitle:"印刷を停止",stopMessage:"現在の印刷「{{name}}」を停止しますか？プリンター上の印刷ジョブがキャンセルされます。",removeTitle:"履歴から削除",removeMessage:"「{{name}}」をキュー履歴から削除しますか？",clearHistoryTitle:"履歴をクリア",clearHistoryMessage:"{{count}}件の履歴をすべて削除しますか？",cancelButton:"印刷をキャンセル",stopButton:"印刷を停止",thisPrint:"この印刷",thisItem:"このアイテム"},toast:{cancelled:"キャンセル済み",cancelFailed:"アイテムのキャンセルに失敗しました",removed:"キューアイテムを削除しました",removeFailed:"プロジェクトからのアーカイブ削除に失敗しました",stopped:"印刷を停止しました",stopFailed:"印刷の停止に失敗しました",released:"印刷をキューにリリースしました",startFailed:"印刷の開始に失敗しました",reorderFailed:"キューの並べ替えに失敗しました",historyCleared:"{{count}}件の履歴をクリアしました",clearHistoryFailed:"履歴のクリアに失敗しました",updateFailed:"アイテムの更新に失敗しました",bulkCancelled:"{{count}}件のアイテムをキャンセルしました",bulkCancelFailed:"アイテムのキャンセルに失敗しました"},timeline:{listView:"リスト",timelineView:"タイムライン",unassigned:"未割当",noData:"この日の予定された印刷はありません",allDoneBy:"すべての印刷は {{time}} までに完了予定",staged:"ステージング",filterAll:"すべて表示",filterPrinting:"印刷中",filterQueued:"待機中",time:{anyMoment:"まもなく",minutesLeft:"残り{{minutes}}分",hoursLeft:"残り{{hours}}時間",hoursMinutesLeft:"残り{{hours}}時間{{minutes}}分"},day:{previous:"前日",next:"翌日",today:"今日"}},permissions:{noStopPrint:"印刷を停止する権限がありません",noStartPrint:"印刷を開始する権限がありません",noEdit:"このキューアイテムを編集する権限がありません",noCancel:"このキューアイテムをキャンセルする権限がありません",noRequeue:"アイテムを再キューする権限がありません",noRemove:"このキューアイテムを削除する権限がありません",noClearHistory:"すべての履歴をクリアする権限がありません",noEditItems:"キューアイテムを編集する権限がありません",noCancelItems:"キューアイテムをキャンセルする権限がありません"}},backgroundDispatch:{unknownFile:"不明なファイル",unknownPrinter:"不明なプリンター",startingPrints:"印刷開始中",progressSummary:"{{complete}}/{{total}} 完了 • 配信済み: {{dispatched}} • 処理中: {{processing}}",expandDetails:"配信詳細を展開",collapseDetails:"配信詳細を折りたたむ",dismissToast:"配信トーストを閉じる",cancelDispatchJob:"配信ジョブをキャンセル",cancel:"キャンセル",cancelling:"キャンセル中…",awaitingPrinter:"プリンターを待機中…",status:{dispatched:"配信済み",processing:"処理中",completed:"完了",failed:"失敗",cancelled:"キャンセル済み"},toast:{cancellingUpload:"アップロードをキャンセル中...",cancelled:"配信をキャンセルしました",cancelFailed:"配信のキャンセルに失敗しました",completeWithFailures:"バックグラウンド配信完了: {{completed}} 件成功、{{failed}} 件失敗",completeSuccess:"バックグラウンド配信完了: {{completed}} 件成功",printStartedRemaining:"{{completed}} 件の印刷を開始、残り {{remaining}} 件送信中..."}},stats:{title:"統計",subtitle:"ウィジェットをドラッグして並べ替え。目のアイコンをクリックして非表示。",overview:"概要",totalPrints:"総印刷数",successRate:"成功率",totalPrintTime:"総印刷時間",printTime:"印刷時間",totalFilament:"総フィラメント使用量",filamentUsed:"フィラメント使用量",filamentCost:"フィラメントコスト",totalCost:"総コスト",energyUsed:"エネルギー使用量",energyCost:"エネルギーコスト",energyWarmingUpTooltip:"エネルギー追跡は毎時スナップショットを収集中です。選択範囲の前に少なくとも1つのスナップショットが存在すると、期間合計が正確になります。初期値は過小になる場合があります。",averagePrintTime:"平均印刷時間",printsPerDay:"1日あたりの印刷数",byPrinter:"プリンター別",printsByPrinter:"プリンター別印刷数",byMaterial:"素材別",byMonth:"月別",last7Days:"過去7日間",last30Days:"過去30日間",last90Days:"過去90日間",allTime:"全期間",quickStats:"クイック統計",printActivity:"印刷アクティビティ",filamentTypes:"フィラメントタイプ",filamentTrends:"フィラメントトレンド",failureAnalysis:"失敗分析",timeAccuracy:"時間精度",successful:"成功",failed:"失敗",perfectEstimate:"100% = 完全な推定",noTimeAccuracyData:"時間精度データがありません",noFilamentData:"フィラメントデータがありません",noPrinterData:"プリンターデータがありません",noPrintData:"印刷データがありません",noPrintDataLast30Days:"過去30日間の印刷データがありません",failureReasons:"失敗理由",topFailureReasons:"主な失敗理由",failedPrintsCount:"{{failed}} / {{total}} 件の印刷が失敗",lastWeekRate:"先週: {{rate}}%",resetLayout:"レイアウトをリセット",recalculateCosts:"コストを再計算",recalculateCostsHint:"現在のフィラメント価格ですべてのアーカイブコストを再計算",exportStats:"統計をエクスポート",exportAsCsv:"CSVでエクスポート",exportAsExcel:"Excelでエクスポート",hiddenCount:"{{count}}件非表示",exportDownloaded:"エクスポートをダウンロードしました",exportFailed:"エクスポートに失敗しました",layoutReset:"レイアウトをリセットしました",recalculatedCosts:"{{count}}件のアーカイブのコストを再計算しました",recalculateFailed:"コストの再計算に失敗しました",loadingStats:"統計を読み込み中...",noPermissionResetLayout:"レイアウトをリセットする権限がありません",noPermissionRecalculate:"コストを再計算する権限がありません",noPrintDataInRange:"選択した期間にデータがありません",periodFilament:"フィラメント使用量",periodCost:"コスト",avgPerPrint:"1印刷あたりの平均",usageOverTime:"時間推移",filamentByWeight:"重量",printDuration:"印刷時間分布",printerUtilization:"プリンター稼働率",filamentSuccess:"素材別成功率",printHabits:"印刷習慣",printTimeOfDay:"時間帯別プリント",colorDistribution:"カラー分布",noColorData:"カラーデータがありません",records:"記録",longestPrint:"最長プリント",heaviestPrint:"最重プリント",mostExpensivePrint:"最高額",busiestDay:"最多プリント日",successStreak:"連続成功",streakPrint:"連続プリント",streakPrints:"{{count}}連続プリント",printerStats:"プリンター統計",hours:"時間",avgPrints:"平均印刷数",noArchiveData:"印刷データがありません",filamentByTime:"推移",avgWeight:"平均重量",avgTime:"平均時間",filamentByPrints:"印刷数",timeframe:{today:"今日","this-week":"今週","this-month":"今月","last-7":"過去7日間","last-30":"過去30日間","last-90":"過去90日間","this-year":"今年","all-time":"全期間",custom:"カスタム",from:"開始",to:"終了"},allUsers:"全ユーザー",noUser:"ユーザーなし（システム）",filterByUser:"ユーザーでフィルター"},maintenance:{title:"メンテナンス",overview:"概要",allOk:"すべてのメンテナンスは最新です",dueCount:"{{count}}件の期限到来",dueCount_plural:"{{count}}件の期限到来",warningCount:"{{count}}件の警告",warningCount_plural:"{{count}}件の警告",totalPrintTime:"総印刷時間",nextMaintenance:"次回メンテナンス",nothingDue:"予定なし",tasks:"タスク",lastPerformed:"前回実施日",interval:"間隔",hoursRemaining:"残り{{hours}}時間",hoursOverdue:"{{hours}}時間超過",markDone:"完了にする",performMaintenance:"メンテナンスを実施",history:"履歴",noHistory:"メンテナンス履歴がありません",editPrintHours:"印刷時間を編集",currentHours:"現在の時間",statusTab:"ステータス",settingsTab:"設定",overdueCount:"{{count}}件超過",dueSoonCount:"{{count}}件まもなく期限",dueSoon:"まもなく期限",allGood:"問題なし",overdueBy:"{{duration}}超過",dueIn:"あと{{duration}}",timeLeft:"残り{{duration}}",day:"1日",days:"{{count}} 日",week:"1週間",weeks:"{{count}}週間",month:"1ヶ月",months:"{{count}}ヶ月",year:"1年",maintenanceTypes:"メンテナンスタイプ",maintenanceTypesDescription:"システムタイプとカスタムメンテナンスタスク",addCustomType:"カスタムタイプを追加",restoreDefaults:"デフォルトタスクを復元",intervalType:"インターバルタイプ",intervalValue:"間隔 ({{type}})",icon:"アイコン",documentationLink:"ドキュメントリンク（任意）",assignToPrinters:"プリンターに割り当て",selectAtLeastOnePrinter:"プリンターを1台以上選択してください",addType:"タイプを追加",custom:"カスタム",printHours:"印刷時間",calendarDays:"カレンダー日数",exampleName:"例: HEPAフィルター交換",viewDocumentation:"ドキュメントを表示",timeBasedInterval:"時間ベースのインターバル",intervalOverrides:"インターバルのオーバーライド",intervalOverridesDescription:"特定のプリンターの間隔をカスタマイズ",assignedToPrinters:"割り当て済みプリンター：",noPrintersAssigned:"プリンター未割り当て",addPrinterShort:"追加:",printersAssignedClick:"{{count}}台のプリンターを割り当て済み - クリックして管理",removeFromPrinter:"このプリンターから削除",types:{lubricateCarbonRods:"カーボンロッドの潤滑",lubricateRails:"リニアレールの潤滑",cleanNozzle:"ノズル/ホットエンドの清掃",checkBelts:"ベルト張力の確認",cleanBuildPlate:"ビルドプレートの清掃",checkExtruder:"エクストルーダーギアの確認",checkCooling:"冷却ファンの確認",generalInspection:"総合点検",cleanCarbonRods:"カーボンロッドの清掃",lubricateSteelRods:"スチールロッドの潤滑",cleanSteelRods:"スチールロッドの清掃",cleanLinearRails:"リニアレールの清掃",checkPtfeTube:"PTFEチューブの確認",replaceHepaFilter:"HEPAフィルター交換",replaceCarbonFilter:"カーボンフィルター交換",lubricateLeftNozzleRail:"左ノズルレールの潤滑"},maintenanceComplete:"メンテナンスを完了としてマークしました",typeUpdated:"メンテナンスタイプを更新しました",typeDeleted:"メンテナンスタイプを削除しました",defaultsRestored:"デフォルトタスクを{{count}}件復元しました",printHoursUpdated:"印刷時間を更新しました",printerAssigned:"プリンターを割り当てました",printerRemoved:"プリンターを削除しました",deleteTypeConfirm:"「{{name}}」を削除しますか？",deleteSystemTypeTitle:"デフォルトのメンテナンスタスクを削除しますか？",deleteSystemTypeMessage:"デフォルトのメンテナンスタスク「{{name}}」を削除してもよろしいですか？",noPermissionUpdate:"メンテナンス記録を更新する権限がありません",noPermissionPerform:"メンテナンスを実行する権限がありません",noPermissionEditTypes:"メンテナンスタイプを編集する権限がありません",noPermissionDeleteTypes:"メンテナンスタイプを削除する権限がありません",noPermissionEditHours:"メンテナンス時間を編集する権限がありません",noPermissionRemovePrinter:"プリンターの割り当てを解除する権限がありません",noPermissionAssignPrinter:"プリンターを割り当てる権限がありません",noPermissionEditIntervals:"メンテナンス間隔を編集する権限がありません",configureSettings:"メンテナンスタイプと間隔を設定"},settings:{title:"設定",general:"一般",tabs:{general:"一般",smartPlugs:"スマートプラグ",notifications:"通知",queue:"ワークフロー",filament:"フィラメント",network:"ネットワーク",apiKeys:"APIキー",virtualPrinter:"仮想プリンター",spoolbuddy:"SpoolBuddy",failureDetection:"失敗検出",users:"認証",backup:"バックアップ",emailAuth:"メール認証",ldap:"LDAP",twoFa:"二段階認証",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy デバイス",infoBody:"SpoolBuddy キオスクはハートビートにより自動的に登録されます。使用されなくなった場合や、デーモンのクラッシュにより古い重複が残った場合は、ここでデバイスの登録を解除してください。",duplicatesTitle:"{{count}} 台のデバイスが登録されています",duplicatesBody:"キオスク UI は最初に登録されたデバイスのみを使用します。クラッシュによる古い重複がある場合は登録解除してください。オンラインのデバイスは次回のハートビートで自動的に再登録されます。",empty:"SpoolBuddy デバイスはまだ登録されていません。",online:"オンライン",offline:"オフライン",unregister:"登録解除",unregisterSuccess:"デバイスの登録を解除しました",unregisterError:"デバイスの登録解除に失敗しました",confirmTitle:"SpoolBuddy デバイスの登録を解除しますか？",confirmBody:"「{{hostname}}」（{{deviceId}}）をデータベースから削除します。デバイスがオンラインの場合、次回のハートビートで自動的に再登録されます。",ipAddress:"IPアドレス",firmware:"ファームウェア",lastSeen:"最終接続",daemonUptime:"デーモン稼働時間",systemUptime:"システム稼働時間",never:"なし",nfc:"NFC",scale:"計量器",cpuTemp:"CPU 温度",memory:"メモリ",disk:"ディスク",update:"アップデート",updateConfirmTitle:"Spoolbuddyデーモンを更新しますか？",updateConfirmBody:'"{{hostname}}"のソフトウェア更新を実行しますか？更新後にデーモンが再起動されます。',restartBrowser:"ブラウザを再起動",restartBrowserConfirmTitle:"キオスクブラウザを再起動しますか？",restartBrowserConfirmBody:'"{{hostname}}"のキオスクブラウザを再起動しますか？画面が一時的に消えます。',restartDaemon:"デーモンを再起動",restartDaemonConfirmTitle:"Spoolbuddyデーモンを再起動しますか？",restartDaemonConfirmBody:'"{{hostname}}"のSpoolbuddyデーモンを再起動しますか？デバイスが数秒間オフラインになります。',reboot:"再起動",rebootConfirmTitle:"デバイスを再起動しますか？",rebootConfirmBody:'"{{hostname}}"を再起動しますか？デバイスは約1分間オフラインになります。',shutdown:"シャットダウン",shutdownConfirmTitle:"デバイスをシャットダウンしますか？",shutdownConfirmBody:'"{{hostname}}"をシャットダウンしますか？再起動には物理的なアクセスが必要です。',commandConfirm:"確認",commandQueued:"コマンドをキューに追加しました",commandError:"コマンドの送信に失敗しました"},ldap:{title:"LDAP認証",enabledDesc:"LDAP認証が有効です",disabledDesc:"LDAP認証が無効です",disabledHint:"以下のLDAP設定を構成して保存し、有効にしてください。",enabled:"LDAP認証を有効にしました",disabled:"LDAP認証を無効にしました",feature1:"LDAP資格情報でログインできます",feature2:"ローカル管理者アカウントはフォールバックとして残ります",feature3:"ログイン時にLDAPグループがBamBuddyグループにマッピングされます",serverConfig:"LDAPサーバー設定",serverUrl:"サーバーURL",serverUrlHint:"標準はldap://、SSL接続はldaps://を使用",security:"セキュリティ",securityHint:"StartTLSはプレーン接続をTLSにアップグレードします。LDAPSは最初からTLSを使用します。",bindDn:"バインドDN（サービスアカウント）",bindPassword:"バインドパスワード",searchBase:"検索ベースDN",userFilter:"ユーザー検索フィルター",userFilterHint:"{username}はログインユーザー名に置き換えられます。OpenLDAPの場合は(uid={username})を使用。",autoProvision:"ユーザー自動作成",autoProvisionHint:"初回LDAPログイン時にBamBuddyアカウントを自動作成",defaultGroup:"デフォルトグループ",defaultGroupNone:"— なし（フォールバックなし）—",defaultGroupHint:"LDAPユーザーが認証されたがマッピングされたLDAPグループに属していない場合に割り当てられるフォールバックグループ。空欄の場合、マッピングされていないユーザーは権限なしのままになります。",groupMapping:"グループマッピング（JSON）",groupMappingHint:"LDAPグループDNをBamBuddyグループにマッピング。利用可能なグループ: ",testConnection:"接続テスト",settingsSaved:"LDAP設定を保存しました",errors:{serverRequired:"LDAPサーバーURLは必須です",searchBaseRequired:"検索ベースDNは必須です",enableAuthFirst:"先に認証を有効にしてください",configureLdapFirst:"先にLDAP設定を保存してください"}},email:{smtpSettings:"SMTP設定",smtpHost:"SMTPサーバー",smtpPort:"SMTPポート",security:"セキュリティ",authentication:"認証",username:"ユーザー名",password:"パスワード",fromEmail:"送信元メールアドレス",fromName:"送信者名",testConnection:"SMTP接続テスト",testRecipient:"テスト受信者メール",sendTest:"テストメール送信",sending:"送信中...",save:"設定を保存",saving:"保存中...",advancedAuth:"高度な認証",advancedAuthEnabled:"高度な認証が有効です",advancedAuthEnabledDesc:"メールベースのユーザー管理機能が有効になっています。新規ユーザーには自動生成されたパスワードがメールで送信され、ユーザーはパスワード忘れ機能でパスワードをリセットできます。",advancedAuthDisabled:"高度な認証が無効です",advancedAuthDisabledDesc:"高度な認証を有効にして、ユーザー管理のメールベース機能を有効化してください。",enable:"有効にする",disable:"無効にする",feature1:"パスワードは自動生成され、新規ユーザーにメールで送信されます",feature2:"ユーザーはユーザー名またはメールでログインできます",feature3:"パスワード忘れ機能が利用可能です",feature4:"管理者はメールでユーザーパスワードをリセットできます",errors:{requiredFields:"すべての必須フィールドに入力してください",usernameRequired:"認証が有効な場合、ユーザー名は必須です",enterTestEmail:"テストメールアドレスを入力してください",smtpServerAndEmail:"テストする前にSMTPサーバーと送信元メールを入力してください",usernamePasswordRequired:"認証が有効な場合、ユーザー名とパスワードは必須です",configureSmtpFirst:"最初にSMTP設定を構成してテストしてください",enableAuthFirst:"メール関連機能をご利用いただくには、まず認証を有効にしてください。"},success:{settingsSaved:"SMTP設定を保存しました"},securityOptions:{starttls:"STARTTLS (ポート 587)",ssl:"SSL/TLS (ポート 465)",none:"なし (ポート 25)"},authOptions:{enabled:"有効",disabled:"無効"}},appearance:"外観",notifications:"通知",smartPlugs:"スマートプラグ",spoolman:"Spoolman",updates:"アップデート",language:"言語",languageDescription:"表示言語を選択してください",theme:"テーマ",themeLight:"ライト",themeDark:"ダーク",themeSystem:"システム設定に従う",defaultView:"デフォルト画面",defaultViewDescription:"アプリ起動時に表示するページ",checkForUpdates:"アップデートを確認",autoUpdate:"自動アップデート",currentVersion:"現在のバージョン",latestVersion:"最新バージョン",upToDate:"最新です",updateAvailable:"アップデートあり",notificationLanguage:"通知の言語",notificationLanguageDescription:"プッシュ通知の言語",bedCooledThreshold:"ベッド冷却しきい値",bedCooledThresholdDescription:"印刷後にベッドが冷却されたと見なす温度",userNotificationsEnabled:"ユーザー通知",userNotificationsEnabledDescription:"ユーザー通知メニューと印刷ジョブイベントのメール通知を有効にします。高度な認証が必要です。",userNotificationsDisabledHint:"ユーザー通知を使用するには高度な認証を有効にしてください。",notificationProviders:"通知プロバイダー",addProvider:"プロバイダーを追加",editProvider:"プロバイダーを編集",providerType:"プロバイダーの種類",testNotification:"テスト通知",testSuccess:"テスト通知を送信しました",testFailed:"テスト通知の送信に失敗しました",quietHours:"おやすみ時間",quietHoursDescription:"この時間帯は通知を送信しません",quietHoursStart:"開始",quietHoursEnd:"終了",events:{title:"通知イベント",printStart:"印刷開始",printComplete:"印刷完了",printFailed:"印刷失敗",printStopped:"印刷中止",printProgress:"進捗マイルストーン",printProgressDescription:"25%, 50%, 75%で通知",printerOffline:"プリンターオフライン",printerError:"プリンターエラー",filamentLow:"フィラメント残量低下",maintenanceDue:"メンテナンス期限",maintenanceDueDescription:"メンテナンスが必要なときに通知"},smartPlug:{title:"スマートプラグ",add:"スマートプラグを追加",edit:"スマートプラグを編集",name:"名前",ipAddress:"IPアドレス",linkedPrinter:"連携プリンター",autoOn:"自動電源オン",autoOnDescription:"印刷開始時に電源を入れる",autoOff:"自動電源オフ",autoOffDescription:"印刷完了後に電源を切る",offDelay:"オフ遅延",offDelayMinutes:"印刷後の待機時間（分）",offDelayTemp:"ノズル温度が下回ったとき",currentState:"現在の状態",turnOn:"電源オン",turnOff:"電源オフ"},filamentTracking:"フィラメント追跡",filamentTrackingDesc:"フィラメントスプールの追跡方法を選択してください。内蔵インベントリまたは外部Spoolmanサーバーを使用できます。",filamentChecks:"フィラメントチェック",disableFilamentWarnings:"フィラメント警告を無効化",disableFilamentWarningsDesc:"印刷またはキュー追加時にフィラメント不足の警告を表示しない",preferLowestFilament:"残量が少ないフィラメントを優先",preferLowestFilamentDesc:"複数のスプールが一致する場合、残量が最も少ないものを使用します",trackingModeBuiltIn:"内蔵インベントリ",trackingModeBuiltInDesc:"RFID自動検出と使用量追跡を含む",trackingModeSpoolmanDesc:"外部フィラメント管理サーバー",builtInFeatureRfid:"AMS内のBambu Lab RFIDスプールを自動検出",builtInFeatureUsage:"プリントごとのフィラメント消費量を追跡",builtInFeatureCatalog:"スプール、カラー、K値プロファイルを管理",builtInFeatureThirdParty:"サードパーティ製スプールをインベントリスプールに割り当て可能",amsSyncButton:"AMSから重量を同期",amsSyncTitle:"AMSからスプール重量を同期",amsSyncMessage:"接続されたプリンターの現在のAMS残量値で、すべてのインベントリスプール重量を上書きします。破損した重量データの復旧に使用してください。プリンターがオンラインである必要があります。",amsSyncing:"同期中...",amsSyncSuccess:"{{synced}}個のスプールを同期、{{skipped}}個をスキップ",amsSyncError:"AMSからの重量同期に失敗しました",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolmanサーバーのurl（例：http://localhost:7912）",spoolmanConnected:"接続中",spoolmanDisconnected:"未接続",status:"ステータス",connect:"接続",disconnect:"切断",howSyncWorks:"同期の仕組み",syncInfoRfidOnly:"RFIDを搭載した公式Bambu Labスプールのみ同期されます",syncInfoAutoCreate:"新しいスプールは初回同期時にSpoolmanに自動作成されます",syncInfoThirdPartySkipped:"Bambu Lab以外のスプール（サードパーティ、リフィル）はスキップされます",linkingExistingSpools:"既存スプールのリンク",linkingExistingSpoolsDesc:"既存のSpoolmanスプールをAMSにリンクするには、AMSスロットにカーソルを合わせて「Spoolmanにリンク」をクリックしてください。",syncMode:"同期モード",syncModeAuto:"自動",syncModeManual:"手動のみ",syncModeAutoDesc:"変更が検出されるとAMSデータが自動的に同期されます",syncModeManualDesc:"手動でトリガーした場合のみ同期",syncAmsData:"AMSデータを同期",syncAmsDataDesc:"プリンターのAMSデータをSpoolmanに手動同期",allPrinters:"全プリンター",noDefaultPrinter:"デフォルトなし（毎回選択）",sidebarOrder:"サイドバーの順序",saveThumbnails:"サムネイルを保存",captureFinishPhoto:"完了写真を撮影",noPrintersConfigured:"プリンターが設定されていません",archiveMode:{always:"常にアーカイブを作成",never:"アーカイブを作成しない",ask:"毎回確認"},checkForUpdatesLabel:"アップデートを確認",checkPrinterFirmware:"プリンターファームウェアの確認",includeBetaUpdates:"ベータ版を含める",includeBetaUpdatesDesc:"アップデート確認時にベータ版およびプレリリース版を通知する",enableRetry:"リトライを有効化",homeAssistantDescription:"Home Assistantに接続してHA REST APIでスマートプラグを制御します。switch、light、input_booleanエンティティに対応しています。",environmentManagedLabel:"(環境変数で管理)",autoEnabledViaEnv:"環境変数により自動的に有効化されました",urlFromEnvReadOnly:"HA_URL環境変数で設定された値（読み取り専用）",tokenFromEnvReadOnly:"HA_TOKEN環境変数で設定された値（読み取り専用）",mqttConnectedTo:"接続先:",prometheusDescription:"プリンターデータをPrometheus形式で公開",noSmartPlugsTitle:"スマートプラグが設定されていません",noSmartPlugsDescription:"Tasmotaベースのスマートプラグを追加して、エネルギー消費を追跡し、電源制御を自動化します。",noProvidersTitle:"プロバイダーが設定されていません",noProvidersDescription:"アラートを受信するにはプロバイダーを追加してください。",noTemplatesAvailable:"テンプレートがありません。バックエンドを再起動してデフォルトテンプレートを生成してください。",apiPermissionView:"プリンターステータスとキューを表示",apiPermissionEdit:"印刷キューにアイテムを追加・削除",apiKeysEmptyTitle:"APIキーがありません",apiKeysEmptyDescription:"外部サービスと連携するためのAPIキーを作成してください。",noUsersFound:"ユーザーが見つかりません",noGroupsFound:"グループが見つかりません",noGroupsAvailable:"利用可能なグループがありません",passwordsDoNotMatch:"パスワードが一致しません",systemGroupWarning:"システムグループ名は変更できません",authDisabledTitle:"認証が無効です",authDisabledFeature1:"システムへのアクセスにログインを要求",authDisabledFeature2:"グループベースの権限で複数ユーザーを作成",authDisabledFeature3:"50以上のきめ細かな権限でアクセスを制御",userHasCreated:"このユーザーは以下を作成しています：",userItemsQuestion:"これらのアイテムをどうしますか？",deleteUserConfirm:"このユーザーを削除してもよろしいですか？この操作は元に戻せません。",actionCannotBeUndone:"この操作は元に戻せません",addFirstSmartPlug:"最初のスマートプラグを追加",providers:"プロバイダー",log:"ログ",testAll:"すべてテスト",testResults:"テスト結果",testPassedCount:"{{count}}件成功",testFailedCount:"{{count}}件失敗",messageTemplates:"メッセージテンプレート",messageTemplatesDescription:"各イベントの通知メッセージをカスタマイズ。",apiKeys:"APIキー",apiKeysDescription:"外部連携やWebhook用のAPIキーを作成します。",createKey:"キーを作成",apiKeyCreated:"APIキーを作成しました",apiKeyCopyWarning:"今すぐこのキーをコピーしてください - 再表示されません！",useInApiBrowser:"APIブラウザーで使用",createNewApiKey:"新しいAPIキーを作成",keyName:"キー名",keyNamePlaceholder:"例: Home Assistant, OctoPrint",readStatus:"ステータスの読み取り",readStatusDescription:"プリンターのステータスとキューを表示",manageQueue:"キューの管理",manageQueueDescription:"印刷キューへのアイテムの追加と削除",controlPrinter:"プリンターの制御",controlPrinterDescription:"印刷の一時停止、再開、停止",unnamedKey:"名前なしキー",lastUsed:"最終使用:",read:"読み取り",control:"制御",createFirstKey:"最初のキーを作成",webhookEndpoints:"Webhookエンドポイント",webhookApiKeyHint:"X-API-KeyヘッダーでAPIキーを使用してください。",webhook:{getAllStatus:"全プリンターステータスを取得",getSpecificStatus:"特定のプリンターステータスを取得",addToQueue:"印刷キューに追加",pausePrint:"印刷を一時停止",resumePrint:"印刷を再開",stopPrint:"印刷を停止"},apiBrowser:"APIブラウザ",apiBrowserDescription:"すべての利用可能なAPIエンドポイントを探索してテストします。",apiKeyForTesting:"テスト用APIキー",apiKeyPlaceholder:"CallMeBot APIキー",apiKeyHint:"このキーはX-API-Keyヘッダーとしてリクエストに送信されます。",deleteApiKeyTitle:"APIキーを削除",deleteApiKeyMessage:"このAPIキーを削除してもよろしいですか？このキーを使用しているすべての連携が動作しなくなります。",deleteKey:"キーを削除",amsDisplayThresholds:"AMS表示しきい値",amsThresholdsDescription:"AMS湿度と温度インジケーターの色しきい値を設定します。",humidity:"湿度",goodGreen:"良好（緑）≤",fairOrange:"普通（オレンジ）≤",aboveFairBad:"普通のしきい値以上は赤（悪い）で表示",fairAlsoDryingThreshold:"このしきい値は自動乾燥のトリガーにも使用されます",temperature:"温度",goodBlue:"良好（青）≤",aboveFairHot:"普通のしきい値以上は赤（高温）で表示",historyRetention:"履歴の保持",keepSensorHistory:"センサー履歴の保持期間",historyRetentionDescription:"古い湿度と温度データは自動的に削除されます",defaultPrintOptions:"デフォルト印刷オプション",defaultPrintOptionsDescription:"新しい印刷のデフォルト値を設定します。印刷ダイアログで個別に変更できます。",defaultBedLevelling:"ベッドレベリング",defaultBedLevellingDesc:"印刷前にベッドを自動レベリング",defaultFlowCali:"フローキャリブレーション",defaultFlowCaliDesc:"押出フローのキャリブレーション",defaultVibrationCali:"振動キャリブレーション",defaultVibrationCaliDesc:"リンギングアーティファクトを低減",defaultLayerInspect:"第1層検査",defaultLayerInspectDesc:"AIによる第1層の検査",defaultTimelapse:"タイムラプス",defaultTimelapseDesc:"タイムラプス動画を記録",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"プレートクリア確認",requirePlateClear:"プレートクリア確認を必須にする",requirePlateClearDescription:"有効にすると、スケジューラーは完了したプリンターでキューの印刷を開始する前に、プリンターごとのプレートクリア確認を待ちます。無効にすると、プリンターカード上のプレート状態バッジと「プレートをクリア済みにする」ボタンも非表示になります。",gcodeInjection:"G-codeインジェクション",gcodeInjectionDescription:"Farmloop、SwapMod、AutoClear、Printflow 3Dなどの自動印刷システム用に、印刷の開始と終了時にカスタムG-codeを挿入します。スニペットはプリンターモデルごとに設定し、キューアイテム��「G-codeを挿入」を有効にすると適用されます。",gcodeInjectionNoPrinters:"プリンターが見つかりません。G-codeスニペットを設定するにはプリンターを追加してください。",gcodeStartLabel:"開始G-code",gcodeEndLabel:"終了G-code",gcodeStartPlaceholder:"印刷開始前に挿入されるG-code...",gcodeEndPlaceholder:"印刷終了後に追加されるG-code...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"自動乾燥",queueDryingDescription:"キュー印刷の合間にプリンターがアイドル状態の時、AMSフィラメントを自動的に乾燥します。上記の湿度しきい値を使用します。",queueDryingEnabled:"自動乾燥を有効にする",queueDryingEnabledDescription:"プリンターがアイドル状態で湿度がしきい値を超えた場合、AMS乾燥を自動的に開始",queueDryingBlock:"乾燥完了まで待機",queueDryingBlockDescription:"乾燥が完了するまで印刷キューをブロックします。オフの場合、印刷が優先されます。",ambientDryingEnabled:"常時乾燥",ambientDryingEnabledDescription:"キューに関係なく、アイドル状態のプリンターで湿度がしきい値を超えた場合に自動的にフィラメントを乾燥。",dryingPresets:"乾燥プリセット",dryingPresetsDescription:"フィラメントタイプごとの温度と時間。AMS 2 Proは低温、AMS-HTは高温に対応。",dryingFilament:"フィラメント",printModal:"印刷ダイアログ",expandCustomMapping:"カスタムマッピングをデフォルトで展開",expandCustomMappingDescription:"複数プリンターに印刷する際、プリンターごとのAMSマッピングを展開表示",authentication:"認証",authEnabledDescription:"ユーザー認証でインスタンスが保護されています",authDisabledDescription:"認証を有効にして、ユーザーアカウントの作成、権限の管理、Bambuddyインスタンスのセキュリティを確保しましょう。",authDisabledMessage:"認証を有効にして、ユーザーアカウントの作成、権限の管理、Bambuddyインスタンスのセキュリティを確保しましょう。",enableAuthentication:"認証を有効にする",currentUser:"現在のユーザー",changePassword:"パスワードを変更",admin:"管理者",users:"ユーザー",addUser:"ユーザーを追加",groups:"グループ",addGroup:"グループを追加",system:"システム",noDescription:"説明なし",userCount:"{{count}}人のユーザー",permissionCount:"{{count}}件の権限",createUser:"ユーザーを作成",username:"ユーザー名",enterUsername:"ユーザー名を入力",password:"パスワード",enterPassword:"パスワードを入力（6文字以上）",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"パスワードを確認",viewReleaseOnGitHub:"GitHubでリリースを表示",turnAllPlugsOn:"すべてのプラグをオン",turnAllPlugsOff:"すべてのプラグをオフ",clearNotificationLogs:"通知ログをクリア",clearLogsMessage:"30日以上前のすべての通知ログを完全に削除します。この操作は元に戻せません。",clearLogs:"通知ログを削除",resetUiPreferences:"UI設定をリセット",resetUiPreferencesMessage:"すべてのUI設定をデフォルトにリセットします：サイドバー順序、テーマ、ダッシュボードレイアウト、表示モード、ソート設定。プリンター、アーカイブ、サーバー設定は影響を受けません。クリア後にページがリロードされます。",resetPreferences:"設定をリセット",deleteGroupTitle:"グループを削除",deleteGroupMessage:"このグループを削除しますか？このグループのユーザーはこれらの権限を失います。",deleteGroup:"グループを削除",disableAuthenticationTitle:"認証を無効化",disableAuthenticationMessage:"認証を無効にしますか？Bambuddyインスタンスにログインなしでアクセスできるようになります。ユーザーはデータベースに残りますが、認証は無効になります。",disableAuthentication:"認証を無効化",configureBambuddy:"Bambuddyを設定",systemDefault:"システムデフォルト",archiveSettings:"アーカイブ設定",newWindow:"新しいウィンドウ",embeddedOverlay:"埋め込みオーバーレイ",preferredSlicer:"優先スライサー",preferredSlicerDescription:"ファイルを開くスライサーアプリケーションを選択",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"外部カメラ",costTracking:"コスト追跡",printsOnly:"印刷のみ",totalConsumption:"総消費量",dataManagement:"データ管理",storageUsage:"ストレージ使用量",storageUsageDescription:"カテゴリ別のデータ使用量の内訳",storageUsageTotal:"合計",storageUsageErrors:"エラー",storageUsageOtherBreakdown:"その他（静的アセット、スクリプト、設定ファイルを含む）",storageUsageSystem:"システム",storageUsageData:"データ",storageUsageUnavailable:"ストレージ使用量情報は利用できません",clearNotificationLogsDescription:"30日以上前の通知ログを削除",resetUiPreferencesDescription:"サイドバー順序、テーマ、表示モード、レイアウト設定をリセット。プリンター、アーカイブ、設定は影響を受けません。",enableHomeAssistant:"Home Assistantを有効化",enableMqtt:"MQTTを有効化",useTls:"TLSを使用",enableMetricsEndpoint:"メトリクスエンドポイントを有効化",availableMetrics:"利用可能なメトリクス",editUser:"ユーザーを編集",deleteUserTitle:"ユーザーを削除",groupName:"グループ名",leaveEmptyForAnonymous:"匿名の場合は空のまま",leaveEmptyForNoAuth:"認証なしの場合は空のまま",enterNewPassword:"新しいパスワードを入力",confirmNewPassword:"新しいパスワードを確認",enterGroupName:"グループ名を入力",enterDescriptionOptional:"説明を入力（任意）",enterCurrentPassword:"現在のパスワードを入力",enterNewPasswordMin6:"新しいパスワードを入力（6文字以上）",toast:{keyCopied:"キーをクリップボードにコピーしました",copyFailed:"キーのコピーに失敗しました",keyAddedToBrowser:"キーをAPIブラウザに追加しました",clearLogsFailed:"ログの削除に失敗しました",uiPreferencesReset:"UI設定をリセットしました。更新中...",authDisabled:"認証を無効にしました",authDisableFailed:"認証の無効化に失敗しました",apiKeyCreated:"APIキーを作成しました",apiKeyDeleted:"APIキーを削除しました",userCreated:"ユーザーが正常に作成されました",userUpdated:"ユーザーが正常に更新されました",userDeleted:"ユーザーが正常に削除されました",groupCreated:"グループを作成しました",groupUpdated:"グループを更新しました",groupDeleted:"グループを削除しました",fillRequiredFields:"必須項目をすべて入力してください",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です",enterGroupName:"グループ名を入力",settingsSaved:"設定を保存しました",noPermissionUpdate:"設定を変更する権限がありません",cameraSettingsSaved:"カメラ設定を保存しました",enterCameraUrl:"カメラURLを入力してください",passwordChanged:"パスワードが正常に変更されました",connectionFailed:"接続失敗",testFailed:"テスト通知の送信に失敗しました",cameraConnected:"カメラ接続{{resolution}}"},testConnection:"接続テスト",catalog:{spoolCatalog:"スプールカタログ",spoolCatalogDescription:"ブランド/タイプ別の空スプール重量。スプール追加時の自動重量検索に使用されます。",searchCatalog:"カタログを検索...",addNewEntry:"新しいエントリを追加",namePlaceholder:"名前（例：Bambu Lab - プラスチック）",weight:"重量",type:"タイプ",default:"デフォルト",custom:"カスタム",noMatch:"検索に一致するエントリがありません",empty:"カタログにエントリがありません",deleteEntry:"エントリを削除",deleteConfirm:"「{{name}}」を削除してもよろしいですか？",resetCatalog:"カタログをリセット",resetConfirm:"カタログをデフォルトにリセットしますか？カスタムエントリはすべて削除されます。",loadFailed:"スプールカタログの読み込みに失敗しました",nameWeightRequired:"名前と重量は必須です",entryAdded:"エントリを追加しました",addFailed:"エントリの追加に失敗しました",entryUpdated:"エントリを更新しました",updateFailed:"エントリの更新に失敗しました",entryDeleted:"エントリを削除しました",deleteFailed:"エントリの削除に失敗しました",resetSuccess:"カタログをデフォルトにリセットしました",resetFailed:"カタログのリセットに失敗しました",exported:"{{count}}件のエントリをエクスポートしました",imported:"{{added}}件のエントリをインポートしました（{{skipped}}件スキップ）",importFailed:"インポートに失敗しました：無効なJSON形式",exportTooltip:"カタログをJSONにエクスポート",importTooltip:"JSONからカタログをインポート",resetTooltip:"デフォルトにリセット",selectedCount:"{{count}}件選択中",deleteSelected:"選択を削除",bulkDeleteConfirm:"{{count}}件のエントリーを削除してもよろしいですか？",bulkDeleted:"{{count}}件のエントリーを削除しました",bulkDeleteFailed:"エントリーの削除に失敗しました"},colorCatalog:{title:"カラーカタログ",description:"メーカー/素材別のフィラメントカラー。スプール追加時の自動カラー検索に使用されます。",searchColors:"カラーを検索...",allManufacturers:"すべてのメーカー",addNewColor:"新しいカラーを追加",manufacturer:"メーカー",colorName:"カラー名",hex:"Hex",materialOptional:"素材（任意）",showing:"{{total}}件中{{filtered}}件を表示",noMatch:"検索に一致するカラーがありません",empty:"カタログにカラーがありません",deleteColor:"カラーを削除",deleteConfirm:"「{{name}}」を削除してもよろしいですか？",resetCatalog:"カラーカタログをリセット",resetConfirm:"カタログをデフォルトにリセットしますか？カスタムカラーはすべて削除されます。",sync:"同期",starting:"開始中...",syncTooltip:"FilamentColors.xyzから同期（2000+カラー）",loadFailed:"カラーカタログの読み込みに失敗しました",fieldsRequired:"メーカー、カラー名、Hexカラーは必須です",colorAdded:"カラーを追加しました",addFailed:"カラーの追加に失敗しました",colorUpdated:"カラーを更新しました",updateFailed:"カラーの更新に失敗しました",colorDeleted:"カラーを削除しました",deleteFailed:"カラーの削除に失敗しました",resetSuccess:"カラーカタログをデフォルトにリセットしました",resetFailed:"カタログのリセットに失敗しました",syncUpToDate:"最新の状態です（{{count}}件のカラーを確認）",syncComplete:"{{added}}件の新しいカラーを追加しました（{{skipped}}件は既に存在）",syncError:"同期エラー",syncFailed:"FilamentColors.xyzからの同期に失敗しました",exported:"{{count}}件のカラーをエクスポートしました",imported:"{{added}}件のカラーをインポートしました（{{skipped}}件スキップ）",importFailed:"インポートに失敗しました：無効なJSON形式",selectedCount:"{{count}}件選択中",deleteSelected:"選択を削除",bulkDeleteConfirm:"{{count}}件のカラーを削除してもよろしいですか？",bulkDeleted:"{{count}}件のカラーを削除しました",bulkDeleteFailed:"カラーの削除に失敗しました"},dateFormat:"日付形式",dateFormatUs:"US (MM/DD/YYYY)",dateFormatEu:"EU (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"時刻形式",timeFormat12:"12時間制 (3:30 PM)",timeFormat24:"24時間制 (15:30)",defaultPrinter:"デフォルトプリンター",defaultPrinterDescription:"アップロード、再印刷、その他の操作でこのプリンターを事前選択します。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"サイドバーの項目をドラッグして並べ替え。ここでデフォルトの順序にリセット。",setDefault:"デフォルト設定",sidebarOrderSetDefaultHint:"デフォルト設定は、まだカスタマイズしていないユーザーに現在のメニュー順序を適用します。",sidebarDefaultSet:"デフォルトメニュー順序を設定しました。",sidebarDefaultCleared:"デフォルトメニュー順序をクリアしました。",sidebarDefaultFailed:"デフォルトメニュー順序の設定に失敗しました。",reset:"リセット",darkMode:"ダークモード",lightMode:"ライトモード",active:"(アクティブ)",background:"背景",accent:"アクセント",style:"スタイル",bgNeutral:"ニュートラル",bgWarm:"ウォーム",bgCool:"クール",bgOled:"OLEDブラック",bgSlate:"スレートブルー",bgForest:"フォレストグリーン",accentGreen:"グリーン",accentTeal:"ティール",accentBlue:"ブルー",accentOrange:"オレンジ",accentPurple:"パープル",accentRed:"レッド",styleClassic:"クラシック",styleGlow:"グロー",styleVibrant:"ビビッド",themeToggleHint:"サイドバーの太陽/月アイコンでダークモードとライトモードを切り替えます。",autoArchivePrints:"印刷を自動アーカイブ",autoArchiveDescription:"印刷完了時に3MFファイルを自動保存",saveThumbnailsDescription:"3MFファイルからプレビュー画像を抽出して保存",captureFinishPhotoDescription:"印刷完了時にプリンターカメラから写真を撮影",ffmpegNotInstalled:"ffmpegがインストールされていません",ffmpegRequired:"カメラ撮影にはffmpegが必要です。<brew>brew install ffmpeg</brew>（macOS）または<apt>apt install ffmpeg</apt>（Linux）でインストールしてください。",camera:"カメラ",cameraViewMode:"カメラ表示モード",cameraOverlayDescription:"メイン画面上にリサイズ可能なオーバーレイでカメラを表示",cameraWindowDescription:"別のブラウザウィンドウでカメラを表示",externalCamerasDescription:"内蔵プリンターカメラの代わりに外部カメラを設定。MJPEGストリーム、RTSP、HTTPスナップショット、USBカメラ（V4L2）をサポート。有効にすると、ライブビューと完了写真に外部カメラが使用されます。",cameraPlaceholderUsb:"デバイスパス (/dev/video0)",cameraPlaceholderUrl:"カメラURL (rtsp://... または http://...)",cameraTypeMjpeg:"MJPEGストリーム",cameraTypeRtsp:"RTSPストリーム",cameraTypeSnapshot:"HTTPスナップショット",cameraTypeUsb:"USBカメラ (V4L2)",cameraRotation:"回転",test:"テスト",connected:"接続済み",disconnected:"未接続",currency:"通貨",defaultFilamentCost:"デフォルトフィラメントコスト（kg単価）",electricityCost:"電気料金（kWh単価）",energyDisplayMode:"エネルギー表示モード",energyModePrintDescription:"ダッシュボードに印刷中の消費エネルギーの合計を表示",energyModeTotalDescription:"ダッシュボードにスマートプラグの累計エネルギーを表示",fileManager:"ファイルマネージャー",createArchiveEntry:"印刷時にアーカイブエントリを作成",createArchiveEntryDescription:"ファイルマネージャーから印刷時に、オプションでアーカイブエントリを作成",lowDiskSpaceWarning:"ディスク容量不足の警告",lowDiskSpaceDescription:"空きディスク容量がこのしきい値を下回った場合に警告を表示",printerFirmware:"プリンターファームウェア",checkFirmwareDescription:"Bambu Labのプリンターファームウェア更新を確認",bambuddySoftware:"Bambuddyソフトウェア",autoCheckDescription:"起動時に自動的に新しいバージョンを確認",checkNow:"今すぐ確認",updateAvailableVersion:"アップデート利用可能: v{{version}}",releaseNotes:"リリースノート",updateViaDocker:"Docker Composeでアップデート:",updateViaHomeAssistant:"アップデートはHome Assistant Supervisorによって管理されます。Home Assistantの設定→アドオン→Bambuddyを開いて新しいバージョンをインストールしてください。",installUpdate:"アップデートをインストール",latestVersionRunning:"最新バージョンを使用しています",failedToCheckUpdates:"アップデートの確認に失敗しました: {{error}}",backupRestore:"バックアップと復元",backupRestoreDescription:"設定のエクスポート/インポートとGitHubバックアップの設定",goToBackup:"バックアップへ",externalUrl:"外部URL",externalUrlDescription:"Bambuddyがアクセス可能な外部URL。通知画像や外部連携に使用されます。",bambuddyUrl:"Bambuddy URL",externalUrlHint:"プロトコルとポートを含めてください（例: http://192.168.1.100:8000）",ftpRetry:"FTPリトライ",ftpRetryDescription:"プリンターのWi-Fiが不安定な場合にFTP操作をリトライ。3MFダウンロード、印刷アップロード、タイムラプスダウンロード、ファームウェア更新に適用。",autoRetryDescription:"失敗したFTP操作を自動的にリトライ",retryAttempts:"リトライ回数",retryDelay:"リトライ遅延",connectionTimeout:"接続タイムアウト",time_one:"{{count}}回",time_other:"{{count}}回",second_one:"{{count}}秒",second_other:"{{count}}秒",nSeconds:"{{count}}秒",increaseForWeakWifi:"Wi-Fiが弱いプリンター用に増やしてください",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Home Assistantに接続してHA REST API経由でスマートプラグを制御。switch、light、input_boolean、scriptエンティティをサポート。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"長期アクセストークン",haTokenHint:"HAでトークンを作成: プロフィール → 長期アクセストークン → トークンを作成",connectionSuccessful:"接続成功",connectionFailed:"接続失敗",haConnectionSuccess:"Home Assistantへの接続に成功しました。",haConnectionFailed:"Home Assistantへの接続に失敗しました。",mqttPublishing:"MQTTパブリッシュ",mqttDescription:"Node-RED、Home Assistant、その他の自動化システムとの統合のため、外部MQTTブローカーにBamBuddyイベントをパブリッシュ。",mqttEnableDescription:"外部MQTTブローカーにイベントをパブリッシュ",brokerHostname:"ブローカーホスト名",port:"ポート",usernameOptional:"ユーザー名（オプション）",passwordOptional:"パスワード（オプション）",topicPrefix:"トピックプレフィックス",topicPrefixHint:"トピック形式: {{prefix}}/printers/<serial>/status 等",prometheusMetrics:"Prometheusメトリクス",prometheusEndpointDescription:"Prometheus/Grafanaモニタリング用に<code>/api/v1/metrics</code>でプリンターメトリクスを公開。",bearerTokenOptional:"Bearerトークン（オプション）",bearerTokenHint:"設定時、リクエストに<code>Authorization: Bearer <token></code>が必要",metricsConnectionStatus:"接続状態",metricsPrinterState:"プリンター状態（idle/printing等）",metricsPrintProgress:"印刷進捗 0-100%",metricsBedTemp:"ベッド温度",metricsNozzleTemp:"ノズル温度",metricsPrintsTotal:"結果別の総印刷数",metricsMore:"...その他（レイヤー、ファン、キュー、フィラメント使用量）",smartPlugsDescription:"スマートプラグ（TasmotaまたはHome Assistant）を接続して、電源制御の自動化とプリンターのエネルギー使用量を追跡。",allOn:"すべてオン",allOff:"すべてオフ",addSmartPlug:"スマートプラグを追加",energySummary:"エネルギー概要",currentPower:"現在の消費電力",plugsOnline:"{{reachable}}/{{total}}プラグオンライン",today:"今日",yesterday:"昨日",total:"合計",enablePlugsForSummary:"プラグを有効にしてエネルギー概要を表示",addNotificationProvider:"追加",systemBadge:"(システム)",creating:"作成中...",changing:"変更中...",deleteUserAndItems:"ユーザーとそのアイテムを削除",deleteUserKeepItems:"ユーザーを削除、アイテムは保持（オーナーなしになります）",ok:"OK",twoFa:{totpTitle:"認証アプリ (TOTP)",totpDesc:"Google Authenticator、Aegis、Authyなどのアプリを使用します。",emailOtpTitle:"メールOTP",emailOtpDesc:"ログイン時に{{email}}にワンタイムコードを送信します。",emailOtpNoEmail:"この方法を有効にするには、アカウントにメールアドレスを追加してください。",addEmailFirst:"アカウントにメールアドレスがありません。管理者に追加を依頼してください。",setupTotp:"認証アプリを設定",setupAuthApp:"認証アプリを設定",setupInstructions:"認証アプリでQRコードをスキャンし、コードで確認してください。",manualEntry:"スキャンできない場合は、このシークレットを手動で入力してください:",scannedContinue:"コードをスキャンしました — 続ける",enterCodeToConfirm:"認証アプリの6桁のコードを入力して設定を確認してください。",activate:"有効化",disableTotp:"認証アプリを無効化",disableConfirmHint:"認証アプリを無効にするには、有効なTOTPコードまたはバックアップコードを入力してください。",totpDisabled:"認証アプリが無効化されました。",emailOtpEnabled:"メールOTPが有効化されました。",emailOtpDisabled:"メールOTPが無効化されました。",smtpRequired:"先にSMTP設定を構成してテストしてください。",invalidCode:"無効なコードです。もう一度お試しください。",enableEmailOtp:"メールOTPを有効化",disableEmailOtp:"メールOTPを無効化",emailSetupEnterCode:"確認コードがメールアドレスに送信されました。このメールボックスを所有していることを確認するために、以下に入力してください。",verifyAndEnable:"確認して有効化",emailDisablePasswordHint:"メールOTPの無効化を確認するには、アカウントのパスワードを入力してください。",passwordPlaceholder:"パスワードを入力してください",backupCodesTitle:"バックアップコードを保存",backupCodesWarning:"これらのコードを安全な場所に保存してください。各コードは一度しか使用できません。",backupCodesRemaining:"バックアップコード残り{{count}}個",savedCodes:"コードを保存しました",regenBackup:"バックアップコードを再生成",regenBackupHint:"現在のTOTPコードを入力して10個の新しいバックアップコードを生成します。",newBackupCodes:"新しいバックアップコード",linkedAccounts:"リンクされたSSOアカウント",linkedAccountsDesc:"これらの外部IDプロバイダーがあなたのアカウントにリンクされています。",oidcUnlinked:"アカウントのリンクを解除しました。"},oidc:{title:"SSO / OIDCプロバイダー",desc:"シングルサインオン用のOpenID Connectプロバイダーを設定します。",addProvider:"プロバイダーを追加",newProvider:"新しいプロバイダー",empty:"OIDCプロバイダーがまだ設定されていません。",created:"プロバイダーが作成されました。",updated:"プロバイダーが更新されました。",deleted:"プロバイダーが削除されました。",deleteTitle:"プロバイダーを削除",deleteMessage:'"{{name}}"を削除しますか？リンクされたすべてのユーザーアカウントが切断されます。',form:{name:"表示名",issuerUrl:"発行者URL",clientId:"クライアントID",clientSecret:"クライアントシークレット",scopes:"スコープ",iconUrl:"アイコンURL (任意)",enabled:"有効",autoCreate:"ユーザーを自動作成",autoCreateDesc:"初回ログイン時にローカルアカウントを自動的に作成します。",autoLink:"既存アカウントを自動リンク",autoLinkDesc:"初回ログイン時にメールアドレスで既存のローカルアカウントにリンクします。",secretHint:"空白のままで現在のものを維持",secretPlaceholder:"新しいシークレット",emailClaim:"メールクレーム",emailClaimDesc:"メールIDとして使用するJWTクレーム。Azure Entra IDには'preferred_username'または'upn'を使用（email_verifiedを送信しない）。信頼できるクレーム名のみ使用してください。",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"メール確認を要求",requireEmailVerifiedDesc:"プロバイダーが確認済みとしてマークした場合にのみメールクレームを受け入れます。",requireEmailVerifiedWarning:"警告：確認なしでメールが受け入れられます。信頼できるプロバイダーのみで使用してください。",requireEmailVerifiedAutoLink:"この設定を変更するには、まず自動リンクを無効にしてください。"}}},notification:{printStarted:{title:"印刷開始",body:"{{printer}}: {{filename}} の印刷を開始しました"},printCompleted:{title:"印刷完了",body:"{{printer}}: {{filename}} が正常に完了しました"},printFailed:{title:"印刷失敗",body:"{{printer}}: {{filename}} が失敗しました"},printStopped:{title:"印刷中止",body:"{{printer}}: {{filename}} が中止されました"},printProgress:{title:"印刷進捗",body:"{{printer}}: {{filename}} は {{percent}}% 完了"},printerOffline:{title:"プリンターオフライン",body:"{{printer}} がオフラインです"},printerError:{title:"プリンターエラー",body:"{{printer}}: {{error}}"},filamentLow:{title:"フィラメント残量低下",body:"{{printer}}: フィラメントが残りわずかです"},maintenanceDue:{title:"メンテナンス期限",body:"{{printer}}: {{items}} の対応が必要です"}},errors:{generic:"問題が発生しました",networkError:"ネットワークエラーです。接続を確認してください。",notFound:"見つかりません",unauthorized:"認証エラー",serverError:"サーバーエラー",validationError:"入力内容を確認してください",printerConnectionFailed:"プリンターへの接続に失敗しました",saveFailed:"保存に失敗しました",deleteFailed:"削除に失敗しました",loadFailed:"データの読み込みに失敗しました"},hmsErrors:{title:"エラー - {{name}}",noErrors:"エラーなし",viewOnWiki:"Bambu Lab Wikiで表示",clearInstructions:"プリンターでエラーをクリアするとここからも消えます。",clearErrors:"エラーをクリア",clearSuccess:"HMSエラーをクリアしました",clearFailed:"HMSエラーのクリアに失敗しました"},mqttDebug:{title:"MQTTデバッグログ",searchPlaceholder:"トピックまたはペイロードで検索...",noMessages:"まだメッセージが記録されていません",startLoggingHint:"「ログ開始」をクリックしてMQTTメッセージのキャプチャを開始",noMessagesMatch:"フィルターに一致するメッセージがありません",adjustFilterHint:"検索条件やフィルター条件を調整してみてください",incoming:"受信",outgoing:"送信",loggingStopped:"ログ記録停止",loggingActive:"ログ記録中 - メッセージは自動更新されます",startLogging:"ログ記録を開始",stopLogging:"ログ停止",clearLog:"ログをクリア",topic:"トピック",timestamp:"タイムスタンプ",direction:"方向",all:"すべて"},printerFiles:{title:"ファイル管理",storageUsed:"使用中:",storageFree:"空き:",filterPlaceholder:"ファイルを検索...",deleteButton:"削除",deleteFiles:"{{count}}件のファイルを削除",deleteFileConfirm:'"{{name}}" を削除しますか？この操作は取り消せません。',deleteFilesConfirm:"選択した{{count}}件のファイルを削除しますか？元に戻せません。",noFiles:"このディレクトリにファイルがありません",loadingFiles:"ファイルを読み込み中...",failedToLoad:"ファイルの読み込みに失敗しました",toast:{filesDeleted:"{{count}}件のファイルを削除しました",deleteFailed:"削除に失敗: {{error}}"}},confirm:{delete:"削除しますか？",unsavedChanges:"保存されていない変更があります。このページを離れますか？",clearQueue:"キューをクリアしますか？"},login:{title:"Bambuddy ログイン",subtitle:"アカウントにサインイン",username:"ユーザー名",usernamePlaceholder:"ユーザー名を入力",usernameOrEmail:"ユーザー名またはメール",usernameOrEmailPlaceholder:"ユーザー名または @ メール",password:"パスワード",passwordPlaceholder:"パスワードを入力",signIn:"サインイン",signingIn:"ログイン中...",rememberMe:"ログイン状態を保持する",forgotPassword:"パスワードをお忘れですか？",loginSuccess:"ログインしました",loginFailed:"ログインに失敗しました",enterCredentials:"ユーザー名とパスワードを入力してください",enterEmail:"メールアドレスを入力してください",oidcLoginFailed:"OIDCログインに失敗しました",oidcErrors:{providerError:"IDプロバイダーがエラーを返しました",missingParameters:"OIDCコールバックに必須パラメーターがありません",invalidState:"OIDCの状態が無効か、すでに使用されています",stateExpired:"OIDCログインセッションが期限切れです。もう一度お試しください",providerNotFound:"OIDCプロバイダーが見つかりません",discoveryFailed:"OIDCディスカバリードキュメントの取得に失敗しました",invalidDiscovery:"OIDCディスカバリードキュメントが無効です",networkError:"OIDCトークン交換中にネットワークエラーが発生しました",badResponse:"OIDCトークン交換中に予期しない応答を受信しました",noIdToken:"OIDCプロバイダーがIDトークンを返しませんでした",validationFailed:"OIDCトークンの検証に失敗しました",nonceMismatch:"OIDCノンスが一致しません。リプレイ攻撃の可能性があります",missingSubClaim:"OIDCトークンにsubクレームがありません",noLinkedAccount:"このOIDCアイデンティティに関連付けられたローカルアカウントがありません",accountInactive:"あなたのアカウントは無効です",userResolutionFailed:"アカウントを解決できませんでした",internalError:"OIDCログイン中に内部エラーが発生しました",tokenExchangeFailed:"OIDCトークン交換に失敗しました"},forgotPasswordTitle:"パスワードを忘れた場合",forgotPasswordMessage:"パスワードを忘れた場合は、システム管理者に連絡してリセットしてもらってください。",forgotPasswordEmailMessage:"メールアドレスを入力すると、新しいパスワードを送信します。",emailAddress:"メールアドレス",emailPlaceholder:"your.email@example.com",cancel:"キャンセル",sending:"送信中...",sendResetEmail:"リセットメールを送信",howToReset:"パスワードのリセット方法：",resetStep1:"Bambuddy管理者に連絡",resetStep2:"ユーザー管理でパスワードリセットを依頼",resetStep3:"管理者が新しい仮パスワードを設定",resetStep4:"新しいパスワードでログインし、設定で変更",gotIt:"了解",twoFA:{title:"二段階認証",subtitle:"アカウントは二段階認証で保護されています。確認コードを入力してください。",methodAuthenticator:"認証アプリ",methodEmail:"メール認証",methodBackup:"バックアップコード",instructionsTotp:"認証アプリを開いて、Bambuddy用の6桁のコードを入力してください。",instructionsEmail:"6桁の確認コードをメールアドレスに送信しました。有効期限は10分です。",instructionsEmailNotSent:"下のボタンをクリックして、メールで確認コードを受け取ってください。",instructionsBackup:"8文字のバックアップコードをいずれか1つ入力してください。各コードは1回のみ使用可能です。",sendCodeButton:"メールでコードを送信する",sendingCode:"送信中...",resendCode:"コードを再送する",codeLabel:"確認コード",backupCodeLabel:"バックアップコード",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"確認する",verifyingButton:"確認中...",backToLogin:"← ログイン画面に戻る",orContinueWith:"または以下でログイン",signInWith:"{{provider}}でログイン",enterCode:"確認コードを入力してください",sendCodeFailed:"確認コードの送信に失敗しました",invalidCode:"無効なコードです。もう一度お試しください。"},resetPassword:{title:"新しいパスワードを設定",subtitle:"下のフィールドに新しいパスワードを入力して確認してください。",newPassword:"新しいパスワード",newPasswordPlaceholder:"8文字以上",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"新しいパスワードを再入力",saving:"保存中…",submit:"新しいパスワードを設定",backToLogin:"ログインに戻る",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは8文字以上で入力してください",resetFailed:"パスワードのリセットに失敗しました。リンクが期限切れの可能性があります。"}},setup:{title:"Bambuddy セットアップ",subtitle:"Bambuddyインスタンスの認証を設定",enableAuth:"認証を有効化",adminAccount:"管理者アカウント",adminAccountDesc:"既に管理者ユーザーが存在する場合、既存の管理者アカウントを使用して認証が有効化されます。既存の管理者を使用する場合は下のフィールドを空のままにするか、新しい認証情報を入力して新しい管理者ユーザーを作成してください。",adminUsername:"管理者ユーザー名",adminPassword:"管理者パスワード",optionalIfAdminExists:"（管理者ユーザーが存在する場合は任意）",adminUsernamePlaceholder:"管理者ユーザー名を入力（任意）",adminPasswordPlaceholder:"管理者パスワードを入力（任意）",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"パスワードを確認",settingUp:"セットアップ中...",completeSetup:"セットアップを完了",toast:{authEnabledAdminCreated:"認証が有効になり、管理者ユーザーが作成されました",authEnabledExistingAdmins:"既存の管理者ユーザーを使用して認証が有効になりました",setupCompleted:"セットアップが完了しました",enterBothCredentials:"管理者のユーザー名とパスワードの両方を入力するか、既存の管理者を使用する場合は両方を空にしてください",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です"}},changePassword:{title:"パスワードを変更",currentPassword:"現在のパスワード",currentPasswordPlaceholder:"現在のパスワードを入力",newPassword:"新しいパスワード",newPasswordPlaceholder:"新しいパスワードを入力（6文字以上）",confirmPassword:"新しいパスワード確認",confirmPasswordPlaceholder:"パスワードを確認",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です",changing:"変更中...",success:"パスワードを変更しました",failed:"パスワードの変更に失敗しました"},plateAlert:{title:"印刷が一時停止されました！",message:"ビルドプレート上にオブジェクトが検出されました。印刷が自動的に一時停止されました。プレートをクリアして印刷を再開してください。",understand:"了解"},camera:{title:"カメラビュー",invalidPrinterId:"無効なプリンターID",live:"ライブ",snapshot:"スナップショット",restartStream:"ストリームを再開",refreshSnapshot:"スナップショットを更新",fullscreen:"フルスクリーン",exitFullscreen:"フルスクリーンを終了",connectingToCamera:"カメラに接続中...",capturingSnapshot:"スナップショットを撮影中...",connectionLost:"接続が切断されました",connectionFailed:"カメラ接続に失敗しました",reconnecting:"{{countdown}}秒後に再接続... (試行 {{attempt}}/{{max}})",reconnectNow:"今すぐ再接続",cameraUnavailable:"カメラが利用できません",cameraUnavailableDesc:"プリンターの電源がオンで接続されていることを確認してください。",noCamera:"カメラがありません",retry:"再試行",cameraStream:"カメラストリーム",zoomOut:"ズームアウト",zoomIn:"ズームイン",resetZoom:"ズームをリセット",recording:"録画中",startRecording:"録画開始",stopRecording:"録画停止",chamberLight:"チャンバーライト切替"},groups:{title:"グループ管理",subtitle:"アクセス制御の権限グループを管理",backToSettings:"設定に戻る",createGroup:"グループを作成",noPermission:"このページにアクセスする権限がありません。",system:"システム",noDescription:"説明なし",usersCount:"{{count}}人のユーザー",permissionsCount:"{{count}}個の権限",edit:"編集",delete:"削除",toast:{created:"グループを作成しました",updated:"グループを更新しました",deleted:"アーカイブを削除しました",enterGroupName:"グループ名を入力"},modal:{editGroup:"グループを編集",createGroup:"グループを作成",cancel:"キャンセル",saving:"保存中...",creating:"作成中...",saveChanges:"変更を保存"},form:{groupName:"グループ名",groupNamePlaceholder:"グループ名を入力",systemGroupWarning:"システムグループ名は変更できません",description:"説明",descriptionPlaceholder:"説明を入力（任意）",permissions:"権限 ({{count}} 選択中)"},deleteModal:{title:"グループを削除",message:"このグループを削除しますか？このグループのユーザーはこれらの権限を失います。",confirm:"確認"},editor:{title:"グループを編集",createTitle:"グループを作成",search:"権限を検索...",selectAll:"すべて選択",clearAll:"すべて解除",permissionsSelected:"{{count}}件選択",noResults:"検索に一致する権限がありません"}},users:{title:"ユーザー管理",subtitle:"ユーザーとBambuddyインスタンスへのアクセスを管理",backToSettings:"設定に戻る",createUser:"ユーザーを作成",noPermission:"このページにアクセスする権限がありません。",admin:"管理者",noGroups:"グループなし",active:"アクティブ",inactive:"非アクティブ",edit:"編集",delete:"削除",system:"システム",noGroupsAvailable:"利用可能なグループがありません",table:{username:"ユーザー名",groups:"グループ",status:"ステータス",actions:"アクション"},toast:{created:"ユーザーを作成しました",updated:"ユーザーを更新しました",deleted:"アーカイブを削除しました",fillRequired:"必須項目をすべて入力してください",passwordsDoNotMatch:"パスワードが一致しません",passwordTooShort:"パスワードは6文字以上必要です"},modal:{createUser:"ユーザーを作成",editUser:"ユーザーを編集",cancel:"キャンセル",creating:"作成中...",saving:"保存中...",saveChanges:"変更を保存",advancedAuthSubtitle:"高度な認証を使用"},form:{username:"ユーザー名",usernamePlaceholder:"ユーザー名を入力",email:"メール",emailPlaceholder:"user@example.com",password:"パスワード",passwordPlaceholder:"パスワードを入力",confirmPassword:"パスワードの確認",confirmPasswordPlaceholder:"パスワードを確認",newPasswordPlaceholder:"新しいパスワードを入力",confirmNewPasswordPlaceholder:"新しいパスワードを確認",leaveBlankToKeep:"（現在のパスワードを維持する場合は空白）",groups:"グループ",optional:"オプション",autoGeneratedPassword:"安全なパスワードが自動的に生成され、ユーザーにメールで送信されます。",passwordManagedByAdvancedAuth:"パスワードは高度な認証によって管理されています。「パスワードのリセット」を使用して、メールで新しいパスワードをユーザーに送信してください。",resetPassword:"パスワードのリセット",resettingPassword:"パスワードをリセット中..."},deleteModal:{title:"ユーザーを削除",message:"このユーザーを削除してもよろしいですか？この操作は元に戻せません。",confirm:"ユーザーを削除"}},streamOverlay:{title:"ストリームオーバーレイ",invalidPrinterId:"無効なプリンターID",cameraStream:"カメラストリーム",progress:"進捗",eta:"残り時間",printerIdle:"プリンター待機中",printerOffline:"プリンターオフライン",status:{printing:"印刷中",paused:"一時停止",finished:"完了",failed:"失敗",idle:"待機中",unknown:"不明"}},profiles:{title:"フィラメントプロファイル",subtitle:"スライサープリセットと圧力キャリブレーションの管理",tabs:{cloud:"クラウドプロファイル",local:"ローカルプロファイル",kprofiles:"Kプロファイル"},localProfiles:{title:"ローカルプロファイル",subtitle:"OrcaSlicerからスライサープリセットをインポート・管理",import:"プロファイルをインポート",importDesc:".bbscfg、.bbsflmt、.orca_filament、.zip、.jsonファイルをここにドロップ",importing:"インポート中...",search:"ローカルプリセットを検索...",noPresets:"ローカルプリセットがまだありません",badge:"ローカル",edit:"編集",delete:"削除",cancel:"キャンセル",deleteConfirmTitle:"プリセットを削除",deleteConfirm:"このプリセットを削除してもよろしいですか？元に戻せません。",source:"ソース",inheritsFrom:"継承元",filamentType:"タイプ",vendor:"メーカー",compatiblePrinters:"プリンター",nozzleTemp:"ノズル温度",cost:"コスト",density:"密度",pressureAdvance:"プレッシャーアドバンス",filament:"フィラメント",process:"プロセス",printer:"プリンター",toast:{importSuccess:"{{count}}件のプリセットをインポートしました",importSkipped:"{{count}}件のプリセットをスキップしました（重複）",importError:"インポート中に{{count}}件のエラーが発生しました",deleted:"プリセットを削除しました",updated:"プリセットを更新しました"}},connectedAs:"接続中:",logout:"ログアウト",noLogoutPermission:"ログアウトする権限がありません",failedToLoad:"ファイルの読み込みに失敗しました",retry:"リトライ",time:{justNow:"たった今",minsAgo:"{{count}}分前",hoursAgo:"{{count}}時間前",daysAgo:"{{count}}日前"},toast:{loggedOut:"ログアウトしました"},login:{title:"Bambuddy ログイン",subtitle:"アカウントにサインイン",email:"メールアドレス",password:"パスワード",region:"リージョン",regionGlobal:"グローバル",regionChina:"中国",verificationCode:"認証コード",totpCode:"認証アプリコード",checkEmail:"メール ({{email}}) に届いた6桁のコードを入力してください",enterTotpHint:"認証アプリの6桁のコードを入力してください",accessToken:"アクセストークン",accessTokenHint:"Bambu Labのアクセストークンを貼り付け（Bambu Studioから取得）",back:"戻る",loginButton:"ログイン",verifyButton:"認証",setTokenButton:"トークンを設定",useToken:"アクセストークンを使用",useEmail:"メールでログイン",toast:{loggedIn:"ログインしました",codeSent:"メールに認証コードを送信しました",enterTotp:"認証アプリのコードを入力してください",tokenSet:"トークンを設定しました"}},presets:{myPreset:"マイプリセット（編集可能）",duplicate:"複製",editable:"編集可能",failedToLoadDetails:"プリセットの詳細を読み込めませんでした",deleteConfirm:"このプロファイルを削除しますか？",deleteWarning:"「{{name}}」をBambu Cloudから完全に削除します。元に戻せません。",noDuplicatePermission:"プリセットを複製する権限がありません",noEditPermission:"プリセットを編集する権限がありません",noDeletePermission:"プロジェクトを削除する権限がありません",types:{filament:"フィラメント",printer:"プリンター",process:"プロセス"},toast:{deleted:"アーカイブを削除しました",created:"プリセットを作成しました",updated:"プリセットを更新しました",duplicated:"プリセットを複製しました",fieldAdded:'フィールド "{{key}}" を追加しました',exported:"プリセットをエクスポートしました"},baseLabel:"ベース: {{name}}",currentLabel:"現在: {{name}}",newPreset:"新規プリセット",editPreset:"プリセットを編集",duplicatePreset:"プリセットを複製",createNewPreset:"新しいプリセットを作成",customizeSettings:"新しいプリセットの設定をカスタマイズ",compareWithBase:"ベースプリセットと比較",compare:"比較",basePreset:"ベースプリセット",selectBasePreset:"ベースプリセットを選択...",presetName:"プリセット名",myCustomPreset:"カスタムプリセット",inheritsFrom:"継承元:",dropJsonToImport:"JSONファイルをドロップしてインポート",tabs:{common:"一般",allFields:"すべてのフィールド"},availableFields:"利用可能なフィールド",searchFieldsPlaceholder:"フィールドを検索...",noMatchingFields:"一致するフィールドがありません",allFieldsAdded:"すべてのフィールドが追加済みです",addCustomField:"カスタムフィールドを追加",yourOverrides:"オーバーライド一覧",noOverridesYet:"オーバーライドはまだありません",clickFieldsToAdd:"左のフィールドをクリックして追加",saveAsTemplate:"テンプレートとして保存",jsonTip:"ヒント: .jsonファイルをこのモーダルにドラッグ＆ドロップして設定をインポート"},cloudView:{searchPlaceholder:"プリセットを検索...",templates:"テンプレート",refresh:"更新",newPreset:"新規プリセット",clearFilters:"フィルターをクリア",compareMode:"比較モード",selectAnotherPreset:"同じタイプ（{{type}}）の別のプリセットを選択",clickTwoPresets:"同じタイプのプリセットを2つクリックして比較",selectFirst:"1. 最初を選択",selectSecond:"2. 2番目を選択",compareNow:"比較を実行",lastSynced:"最終同期:",showingCount:"{{total}} 件中 {{showing}} 件のプリセットを表示",noPresetsFound:"プリセットが見つかりません",columns:{filament:"フィラメント",process:"プロセス",printer:"プリンター"},noFilamentPresets:"フィラメントプリセットなし",noProcessPresets:"プロセスプリセットなし",noPrinterPresets:"プリンタープリセットなし",filters:{type:"種類",owner:"所有者",printer:"プリンター",nozzle:"ノズル",filament:"フィラメント",layer:"レイヤー",all:"すべて",myPresets:"マイプリセット",builtIn:"ビルトイン",process:"プロセス"},noTemplatesPermission:"テンプレートを管理する権限がありません",noRefreshPermission:"プロファイルを更新する権限がありません",noCreatePermission:"プロジェクトを作成する権限がありません"},templates:{title:"フィラメントプロファイル",noTemplates:"テンプレートがありません。バックエンドを再起動してデフォルトテンプレートを作成してください。",createFirst:"プリセットエディタからテンプレートを作成",typeFilter:"タイプ:",deleteTitle:"テンプレートを削除",deleteWarning:"この操作は元に戻せません",deleteConfirm:'"{{name}}" を削除しますか？',namePlaceholder:"テンプレート名",descriptionPlaceholder:"説明",settingsJson:"設定 (JSON)",fieldsCount:"{{count}}フィールド",shownInModals:"モーダルに表示",hiddenInModals:"モーダルで非表示",apply:"適用",toast:{deleted:"アーカイブを削除しました",updated:"テンプレートを更新しました",created:"テンプレートを作成しました",applied:"テンプレートを適用しました"}}},support:{debugLoggingActive:"デバッグログが有効です",manageLogs:"管理",collectItem7:"プリンター接続状態とファームウェアバージョン",collectItem8:"連携状態（Spoolman、MQTT、HA）",collectItem9:"ネットワークインターフェース（サブネットのみ）",collectItem10:"Pythonパッケージバージョン",collectItem11:"データベース健全性チェック",collectItem12:"Docker環境の詳細"},fileManager:{title:"ファイル管理",subtitle:"印刷ファイルの整理と管理",uploadFiles:"ファイルをアップロード",newFolder:"新しいフォルダ",folderName:"フォルダ名",folderNamePlaceholder:"例: 機能パーツ",renameFile:"ファイル名を変更",renameFolder:"フォルダ名を変更",moveFiles:"{{count}}件のファイルを移動",rootNoFolder:"ルート（フォルダなし）",current:"（現在）",linkFolder:"フォルダをリンク",linkFolderDescription:"「{{name}}」をプロジェクトまたはアーカイブにリンクしてすばやくアクセス。",project:"プロジェクト",archive:"アーカイブ",noProjectsFound:"プロジェクトが見つかりません",noArchivesFound:"アーカイブが見つかりません",unlink:"リンク解除",link:"リンク",dragDropFiles:"ファイルをここにドラッグ＆ドロップ",dropFilesHere:"ここにファイルをドロップ",orClickToBrowse:"またはクリックして選択",allFileTypesSupported:"すべてのファイルタイプに対応。ZIPファイルは展開されます。",zipFilesDetected:"ZIPファイルを検出",zipExtractOptions:"ZIPファイルは展開されます。フォルダー構造の処理方法を選択：",preserveZipStructure:"ZIPのフォルダ構造を保持",createFolderFromZip:"ZIPファイル名からフォルダーを作成",stlThumbnailGeneration:"STLサムネイル生成",zipMayContainStl:"ZIPファイルにSTLファイルが含まれている場合があります。展開時にサムネイルを生成できます。",thumbnailsCanBeGenerated:"STLファイルのサムネイルを生成できます。大きなモデルは処理に時間がかかる場合があります。",generateThumbnailsForStl:"STLファイルのサムネイルを生成",threemfDetected:"3MFファイルを検出",threemfExtractionInfo:"プリンターモデル、素材、色、印刷設定は3MFファイルから自動的に抽出されます。",willBeExtracted:"• 展開予定",filesExtracted:"• {{count}}個のファイルを展開済み",uploadComplete:"アップロード完了: {{succeeded}} 件成功",uploadFailed:"アップロード失敗",zipFilesFailed:"{{count}}個のファイルが失敗",uploading:"アップロード中...",changeLink:"リンクを変更...",linkTo:"リンク先...",linkToProjectOrArchive:"プロジェクトまたはアーカイブにリンク",addToQueue:"キューに追加",schedulePrint:"印刷をスケジュール",generateThumbnail:"サムネイルを生成",generateThumbnails:"サムネイルを生成",generateThumbnailsForMissing:"サムネイルのないSTLファイルのサムネイルを生成",gridView:"グリッド表示",listView:"リスト表示",lowDiskSpaceWarning:"ディスク容量不足の警告",lowDiskSpaceDetails:"{{total}}中{{free}}の空き容量のみ。しきい値は設定で{{threshold}}GBに設定されています。",files:"ファイル",folders:"フォルダ",size:"サイズ",free:"空き:",allFiles:"すべてのファイル",wrap:"折り返し",enableTextWrapping:"テキスト折り返しを有効化",disableTextWrapping:"テキスト折り返しを無効化",collapse:"折りたたむ",collapseFoldersByDefault:"フォルダをデフォルトで折りたたむ",expandFoldersByDefault:"フォルダをデフォルトで展開する",dragToResizeTooltip:"ドラッグしてリサイズ、ダブルクリックでリセット",searchFiles:"ファイルを検索...",allTypes:"すべての種類",prints:"印刷回数",ascending:"昇順",descending:"降順",resultsCount:"{{total}}件中{{showing}}件",selectAll:"すべて選択",deselectAll:"すべて選択解除",selected:"{{count}}件選択中",adding:"追加中...",loadingFiles:"ファイルを読み込み中...",folderIsEmpty:"フォルダーは空です",noFilesYet:"ファイルはまだありません",folderEmptyDescription:"ファイルをアップロードするか、このフォルダーにファイルを移動して開始しましょう。",noFilesDescription:"印刷関連ファイルの整理を始めるにはファイルをアップロードしてください。",noMatchingFiles:"一致するファイルがありません",noMatchingFilesDescription:"現在の検索またはフィルター条件に一致するファイルがありません。",clearFilters:"フィルターをクリア",printedCount:"{{count}}回印刷済み",uploadedBy:"アップロード者",deleteFolder:"フォルダを削除",deleteFile:"ファイルを削除",deleteFilesCount:"{{count}}件のファイルを削除",deleteFolderConfirm:"このフォルダを削除しますか？中のファイルもすべて削除されます。",deleteFileConfirm:"このファイルを削除しますか？",deleteFilesConfirm:"選択した{{count}}件のファイルを削除しますか？この操作は元に戻せません。",deleting:"削除中...",noPermissionRenameFolder:"フォルダー名を変更する権限がありません",noPermissionLinkFolder:"フォルダーをリンクする権限がありません",noPermissionDeleteFolder:"フォルダーを削除する権限がありません",noPermissionPrint:"印刷する権限がありません",noPermissionSlice:"You do not have permission to slice files",noPermissionAddToQueue:"キューに追加する権限がありません",noPermissionDownload:"ファイルをダウンロードする権限がありません",noPermissionRenameFile:"このファイル名を変更する権限がありません",noPermissionGenerateThumbnail:"サムネイルを生成する権限がありません",noPermissionDeleteFile:"このファイルを削除する権限がありません",noPermissionCreateFolder:"フォルダーを作成する権限がありません",noPermissionUpload:"ファイルをアップロードする権限がありません",noPermissionMoveFiles:"ファイルを移動する権限がありません",noPermissionDeleteFiles:"ファイルを削除する権限がありません",linkExternal:"外部リンク",linkExternalFolder:"外部フォルダをリンク",linkExternalFolderDescription:"ホストディレクトリ（NAS、USB、ネットワーク共有）をファイルマネージャにマウントします。ファイルはコピーされず、元のパスから直接アクセスされます。",externalFolderNamePlaceholder:"例：NASプリント",externalPath:"ホストパス",externalPathHelp:"Dockerホスト上のディレクトリの絶対パス。コンテナにバインドマウントされている必要があります。",readOnly:"読み取り専用",readOnlyHelp:"アップロードと削除を防止",showHiddenFiles:"隠しファイルを表示（ドットファイル）",externalFolder:"外部フォルダ",scanFolder:"スキャン",toast:{folderCreated:"フォルダを作成しました",folderDeleted:"フォルダを削除しました",fileDeleted:"ファイルを削除しました",filesDeleted:"{{count}}件のファイルを削除しました",filesMoved:"ファイルを移動しました",folderLinked:"フォルダをリンクしました",folderUnlinked:"フォルダのリンクを解除しました",externalFolderLinked:"外部フォルダがリンクされスキャンされました",folderScanned:"スキャン完了：{{added}}件追加、{{removed}}件削除",addedToQueue:"{{count}}個のファイルをキューに追加しました",addedToQueuePartial:"{{added}}件追加、{{failed}}件失敗",failedToAddToQueue:"ファイルの追加に失敗: {{error}}",fileRenamed:"ファイル名を変更しました",folderRenamed:"フォルダ名を変更しました",thumbnailsGenerated:"{{count}}件のサムネイルを生成しました",thumbnailsGeneratedPartial:"{{succeeded}}件生成、{{failed}}件失敗",noStlMissingThumbnails:"サムネイルのないSTLファイルはありません",failedToGenerateThumbnails:"サムネイルの生成に失敗: {{error}}",thumbnailGenerated:"サムネイルを生成しました",failedToGenerateThumbnail:"サムネイルの生成に失敗: {{error}}"}},projects:{title:"プロジェクト",subtitle:"印刷プロジェクトを管理",newProject:"新規プロジェクト",editProject:"プロジェクトを編集",deleteProject:"プロジェクトを削除",projectName:"プロジェクト名",description:"説明",noProjects:"プロジェクトはまだありません",noProjectsFiltered:"{{status}}のプロジェクトはありません",noProjectsFilteredHelp:"{{status}}のプロジェクトがありません。ステータスが変更されるとここに表示されます。",createFirst:"最初のプロジェクトを作成して、関連する印刷の整理、進捗管理、ビルドの管理を始めましょう。",createFirstButton:"最初のプロジェクトを作成",create:"作成",files:"ファイル",prints:"印刷",plates:"プレート",parts:"パーツ",lastModified:"最終更新日",deleteConfirm:"このプロジェクトを削除しますか？アーカイブとキューアイテムはリンク解除されますが、削除されません。",addFiles:"ファイルを追加",removeFile:"ファイルを削除",viewDetails:"詳細を表示",namePlaceholder:"プロジェクト名",descriptionPlaceholder:"プロジェクトの説明（任意）",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"URLはhttp://またはhttps://で始まる必要があります",openExternalUrl:"プロジェクトのURLを開く",coverImageLabel:"カバー画像",coverImageAlt:"プロジェクトのカバー画像",coverImageUpload:"アップロード",coverImageReplace:"置き換える",coverImageRemove:"削除",color:"色",targetPlates:"目標プレート数",targetPlatesPlaceholder:"例: 10",targetPlatesHelp:"印刷ジョブの数",targetParts:"目標パーツ数",targetPartsPlaceholder:"例: 50",targetPartsHelp:"必要なオブジェクトの総数",tagsLabel:"タグ（カンマ区切り）",tagsPlaceholder:"カンマ区切りのタグ",dueDate:"期限",priority:"優先度",priorityLow:"低",priorityNormal:"通常",priorityHigh:"高",priorityUrgent:"緊急",statusActive:"進行中",statusCompleted:"完了",statusArchived:"アーカイブ済み",done:"完了",completed:"完了",failed:"失敗",inQueue:"キュー内",noPrintsYet:"印刷履歴なし",printJobs:"印刷ジョブ",partsPrinted:"印刷済みパーツ",failedParts:"失敗パーツ",import:"インポート",export:"エクスポート",importProject:"プロジェクトをインポート",exportAll:"すべてのプロジェクトをエクスポート",loading:"プロジェクトを読み込み中...",noEditPermission:"プロジェクトを編集する権限がありません",noDeletePermission:"プロジェクトを削除する権限がありません",noCreatePermission:"プロジェクトを作成する権限がありません",noImportPermission:"プロジェクトをインポートする権限がありません",noExportPermission:"プロジェクトをエクスポートする権限がありません",toast:{created:"プロジェクトを作成しました",updated:"プロジェクトを更新しました",deleted:"アーカイブを削除しました",imported:"プロジェクトをインポートしました",multipleImported:"{{count}}件のプロジェクトをインポートしました",importFailed:"インポートに失敗しました",exported:"プロジェクトをエクスポートしました（メタデータのみ）"}},projectDetail:{notFound:"見つかりません",backToProjects:"プロジェクト一覧に戻る",export:"エクスポート",exportProject:"プロジェクトをエクスポート",noExportPermission:"プロジェクトをエクスポートする権限がありません",noEditPermission:"このプロジェクトを編集する権限がありません",partOf:"所属先",priorityLabel:"優先度",noPrints:"このプロジェクトにはまだ印刷がありません",status:{active:"進行中",completed:"完了",archived:"アーカイブ済み"},priority:{low:"低",normal:"通常",high:"高",urgent:"緊急"},dueDate:{overdue:"期限超過",today:"今日が期限",daysLeft:"残り{{count}}日"},progress:{platesProgress:"プレート進捗",partsProgress:"パーツ進捗",printJobs:"印刷ジョブ",parts:"パーツ",percentComplete:"{{percent}}% 完了",remaining:"残り {{count}} 件"},stats:{printJobs:"印刷ジョブ",total:"合計",failed:"失敗 {{count}} 件",partsPrinted:"印刷済みパーツ {{count}} 件",printTime:"印刷時間",filamentUsed:"フィラメント使用量"},cost:{title:"コスト追跡",filamentCost:"フィラメント",energy:"エネルギー",totalCost:"合計コスト",total:"合計",includesBom:"BOM含む",budget:"予算",remaining:"残り"},subProjects:{title:"サブプロジェクト ({{count}})"},notes:{title:"メモ",noEditPermission:"このプロジェクトを編集する権限がありません",placeholder:"このプロジェクトについてメモを追加...",empty:"<空>"},files:{title:"ファイル",linkFolders:"ファイルマネージャーからフォルダーをリンク",forQuickAccess:"してクイックアクセスできるようにします。",fileCount:"{{count}}ファイル",empty:"<空>",noFiles:"このフォルダにファイルはありません。",print:"今すぐ印刷",addToQueue:"キューに追加"},bom:{title:"部品表",acquired:"{{completed}}/{{total}} 取得済み",showAll:"すべて表示",hideDone:"完了を非表示",addPart:"パーツを追加",noAddPermission:"パーツを追加する権限がありません",partNamePlaceholder:"パーツ名",partName:"パーツ名",qty:"数量",price:"価格 ({{currency}})",sourcingUrlPlaceholder:"URL（任意）",remarksPlaceholder:"備考",deletePart:"パーツを削除",deleteConfirm:"「{{name}}」を削除しますか？",noUpdatePermission:"パーツを更新する権限がありません",noEditPermission:"このプロジェクトを編集する権限がありません",noDeletePermission:"プロジェクトを削除する権限がありません",totalCost:"合計コスト",empty:"<空>"},timeline:{title:"アクティビティタイムライン",empty:"<空>"},template:{saveAsTemplate:"テンプレートとして保存",noCreatePermission:"プロジェクトを作成する権限がありません"},queue:{title:"印刷キュー",viewAll:"すべて表示",printing:"印刷中 {{count}} 件",queued:"キュー内 {{count}} 件"},prints:{title:"印刷 ({{count}})"},toast:{projectUpdated:"プロジェクトを更新しました",partAdded:"パーツを追加しました",partRemoved:"パーツを削除しました",exportFailed:"エクスポートに失敗しました",projectExported:"プロジェクトがエクスポートされました",templateCreated:"プロジェクトからテンプレートを作成しました"}},system:{title:"システム情報",version:"バージョン",uptime:"稼働時間",cpuUsage:"CPU使用率",memoryUsage:"メモリ使用量",diskUsage:"ディスク使用量",networkInfo:"ネットワーク情報",logs:"ログ",debugMode:"デバッグモード",enableDebug:"デバッグログを有効化",disableDebug:"デバッグログを無効化",downloadLogs:"ログをダウンロード",clearLogs:"通知ログを削除",dockerInfo:"Docker情報",containerName:"コンテナ名",imageName:"イメージ名",platform:"プラットフォーム",architecture:"アーキテクチャ"},library:{title:"フィラメントライブラリ",addFilament:"フィラメントを追加",editFilament:"フィラメントを編集",deleteFilament:"フィラメントを削除",vendor:"メーカー",material:"素材",color:"色",kFactor:"K値",temperature:"温度",noFilaments:"ライブラリにフィラメントがありません",deleteConfirm:"このフィラメントを削除しますか？",importFromPrinter:"プリンターからインポート",exportToFile:"ファイルにエクスポート"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Spoolman連携",enabled:"Spoolman有効",url:"Spoolman URL",connected:"接続中",disconnected:"未接続",testConnection:"接続テスト",sync:"同期",syncing:"同期中...",lastSync:"最終同期",linkToSpoolman:"Spoolmanに連携",openInSpoolman:"Spoolmanで開く",unlinkSpool:"スプールのリンクを解除",unlinkConfirmTitle:"スプールのリンクを解除しますか?",unlinkConfirmMessage:"これにより、スプールがSpoolmanから切断されます。Spoolman内のスプールデータは変更されません。",selectSpool:"スプールを選択",noUnlinkedSpools:"Spoolmanに未連携のスプールが見つかりません。",linkSuccess:"スプールをSpoolmanにリンクしました",linkFailed:"スプールのリンクに失敗しました",unlinkSuccess:"スプールをSpoolmanから解除しました",unlinkFailed:"スプールのリンク解除に失敗しました",spoolId:"スプールID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"残り",disableWeightSync:"AMS推定重量同期を無効化",disableWeightSyncDesc:"AMS推定値から残量を更新しません。AMSの割合ベースの推定よりもSpoolmanの使用量追跡を優先する場合に使用してください。新しいスプールは引き続きAMS推定値を初期重量として使用します。",reportPartialUsage:"失敗した印刷の部分使用量を報告",reportPartialUsageDesc:"印刷が失敗またはキャンセルされた場合、レイヤー進捗に基づいてその時点までの推定フィラメント使用量を報告します。"},inventory:{title:"スプール在庫管理",spoolmanMixedContentTitle:"Spoolman を HTTPS で読み込めません — ブラウザが混在コンテンツをブロックしています",spoolmanMixedContentBody:"Bambuddy はリバースプロキシ経由で HTTPS 配信されていますが、Spoolman の URL は HTTP のままです。ブラウザはセキュリティ上の理由で混在コンテンツをブロックするため、埋め込みの Spoolman UI を表示できません。Spoolman も HTTPS でアクセスできる必要があります。",spoolmanMixedContentFixReverseProxy:"Spoolman を Bambuddy と同じリバースプロキシ（Traefik / Nginx / Caddy）の後ろに HTTPS で配置し、設定で Spoolman URL を新しい HTTPS アドレスに更新してください。",spoolmanMixedContentFixOpenNewTab:"回避策として Spoolman を新しいタブで HTTP として開くことができます — 混在コンテンツのルールは埋め込みフレームのみに適用され、独立したタブは問題なく動作します。",spoolmanOpenInNewTab:"Spoolman を新しいタブで開く",addSpool:"スプールを追加",editSpool:"スプールを編集",material:"素材",selectMaterial:"素材を選択...",subtype:"サブタイプ",brand:"ブランド",searchBrand:"ブランドを検索...",useCustomBrand:"「{{brand}}」を使用",useCustomMaterial:"カスタム素材を使用: {{material}}",colorName:"色名",colorNamePlaceholder:"Jade White, Fire Red...",color:"色",hexColor:"HEXカラー",pickColor:"カスタムカラーを選択",labelWeight:"表示重量",coreWeight:"空スプール重量",searchSpoolWeight:"スプール重量を検索...",weightUsed:"使用量",currentWeight:"残量",measuredWeight:"計測重量",spoolName:"スプール",costPerKg:"kgあたりのコスト",measuredWeightError:"計測重量は{{min}}gから{{max}}gの間で入力してください。",slicerFilament:"スライサーフィラメント",slicerFilamentName:"スライサープリセット名",slicerPreset:"スライサープリセット",searchPresets:"フィラメントプリセットを検索...",selectedPreset:"選択済み",noPresetsFound:"プリセットが見つかりません",tempOverrides:"温度オーバーライド",note:"メモ",notePlaceholder:"このスプールに関する追加メモ...",category:"カテゴリ",categoryPlaceholder:"例：本番、試作、クライアントA",categoryNone:"カテゴリなし",lowStockThresholdOverride:"在庫低下のしきい値（このスプール）",lowStockThresholdOverrideHelp:"空欄の場合、グローバル設定（{{global}}%）を使用します。",clearRfid:"RFIDタグをクリア",rfidCleared:"RFIDタグをクリアしました",archive:"アーカイブ",restore:"復元",noSpools:"スプールがありません。最初のスプールを追加してください。",noAvailableSpools:"利用可能なスプールがありません。インベントリにスプールを追加するか、別のスロットからスプールの割り当てを解除してください。",kProfiles:"Kプロファイル",addKProfile:"Kプロファイルを追加",assignSpool:"スプールを割り当て",unassignSpool:"割り当て解除",assignSuccess:"スプールを割り当て、AMSスロットを設定しました",assignFailed:"スプールの割り当てに失敗しました",selectSpool:"このスロットに割り当てるスプールを選択",assigned:"割り当て済み",assigning:"割り当て中...",searchSpools:"スプールを検索...",showAllSpools:"すべてのスプールを表示",allMaterials:"すべての素材",filterByBrand:"ブランドで絞り込み...",showArchived:"アーカイブ済みを表示",quickAdd:"クイック追加（在庫）",quantity:"数量",stock:"在庫",configured:"設定済み",spoolsCreated:"{{count}}本のスプールを作成しました",spoolCreated:"スプールを作成しました",spoolUpdated:"スプールを更新しました",spoolDeleted:"スプールを削除しました",spoolArchived:"スプールをアーカイブしました",spoolRestored:"スプールを復元しました",deleteConfirm:"このスプールを削除しますか？この操作は元に戻せません。",archiveConfirm:"このスプールをアーカイブしますか？",advancedSettings:"詳細設定",filamentInfoTab:"フィラメント情報",paProfileTab:"PAプロファイル",filamentInfo:"フィラメント",additional:"追加情報",loadingPresets:"クラウドプリセットを読み込み中...",cloudConnected:"クラウド接続済み",cloudNotConnected:"クラウド未接続（デフォルト使用）",recentColors:"最近",searchColors:"色を検索...",searchResults:"検索結果",allColors:"すべての色",commonColors:"一般的な色",showLess:"少なく表示",showAll:"すべて表示",noColorsFound:"一致する色がありません",noResults:"結果なし",extraColorsLabel:"Extra colours",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.",extraColorsInvalid:"Ignored invalid hex: {{tokens}}",colorEffectLabel:"Effect",colorEffect:{none:"None",sparkle:"Sparkle",wood:"Wood",marble:"Marble",glow:"Glow",matte:"Matte",silk:"Silk",galaxy:"Galaxy",rainbow:"Rainbow",metal:"Metal",translucent:"Translucent",gradient:"Gradient",dualColor:"Dual Color",triColor:"Tri Color",multicolor:"Multicolor"},selectMaterialFirst:"フィラメント情報タブで素材を選択してください。",noPrintersConfigured:"プリンターが設定されていません。プリンターを追加してください。",matchingFilter:"フィルター",anyBrand:"すべてのブランド",anyVariant:"すべてのバリアント",autoSelect:"自動選択",matches:"件一致",match:"件一致",noMatches:"一致なし",connected:"接続済み",offline:"オフライン",printerOffline:"プリンターがオフラインです。接続してキャリブレーションプロファイルを表示してください。",noKProfilesMatch:"選択したフィラメントに一致するKプロファイルがありません。",leftNozzle:"左ノズル",rightNozzle:"右ノズル",profilesSelected:"キャリブレーションプロファイル選択済み",totalInventory:"在庫合計",totalConsumed:"総消費量",byMaterial:"素材別",inPrinter:"プリンター内",lowStock:"残量少",sinceTracking:"追跡開始以降",loadedInAms:"AMS/Extに装填中",remaining:"残り",weightCheck:"重量チェック",lastWeighed:"最終計量",neverWeighed:"未計量",search:"スプールを検索...",showing:"表示",to:"〜",of:"/",show:"表示",spools:"スプール",spool:"スプール",page:"ページ",noSpoolsMatch:"結果なし",noSpoolsMatchDesc:"検索やフィルターを調整してみてください。",active:"アクティブ",archived:"アーカイブ済み",all:"すべて",used:"使用済み",new:"新規",clearFilters:"フィルターをクリア",table:"テーブル",cards:"カード",net:"正味",groupSimilar:"グループ化",groupedSpools:"{{count}}本の同一スプール",groupedRows:"行",columns:"列",configureColumns:"列の設定",configureColumnsDesc:"ドラッグして並べ替えるか、矢印を使用してください。目のアイコンで表示/非表示を切り替えます。",visible:"表示中",reset:"リセット",cancel:"キャンセル",applyChanges:"変更を適用",moveUp:"上へ移動",moveDown:"下へ移動",hideColumn:"列を非表示",showColumn:"列を表示",linkToSpool:"スプールにリンク",tagLinked:"タグがスプールにリンクされました",tagLinkFailed:"タグのリンクに失敗しました",tagAlreadyLinked:"タグは既に別のスプールにリンクされています",unknownTag:"不明なRFIDタグが検出されました",usageHistory:"使用履歴",noUsageHistory:"まだ使用記録がありません",printName:"プリント名",weightConsumed:"消費重量",clearHistory:"クリア",historyCleared:"使用履歴がクリアされました",fillSourceLabel:"(Inv)",lowStockThresholdError:"しきい値は0.1から99.9の間でなければなりません",assignMismatchTitle:"材料の不一致",assignMismatchMessage:"選択したスプールの材料「{{spoolMaterial}}」は、{{location}} のトレイ材料「{{trayMaterial}}」と一致しません。割り当てますか？",assignMismatchConfirm:"強制的に割り当て",assignPartialMismatchMessage:"スプールの材料「{{spoolMaterial}}」は「{{trayMaterial}}」に似ていますが、{{location}} と完全には一致しません。続行しますか？",assignProfileMismatchMessage:"スプールのプロファイル「{{spoolProfile}}」は {{location}} のトレイプロファイル「{{trayProfile}}」と一致しません。続行しますか？"},timelapse:{title:"タイムラプス",create:"タイムラプスを作成",download:"ダウンロード",delete:"削除",preview:"プレビュー",frameRate:"フレームレート",quality:"品質",processing:"バックアップファイルを処理中...",noTimelapses:"利用可能なタイムラプスがありません"},ams:{title:"AMS",slot:"スロット",empty:"<空>",emptySlot:"空のスロット",unknown:"不明",humidity:"湿度",temperature:"温度",filamentType:"フィラメントタイプ",filamentColor:"色",remaining:"残り",history:"AMS履歴",noHistory:"メンテナンス履歴がありません",configureSlot:"フィラメントプロファイルとK値でスロットを設定",externalSpool:"外部スプール",profile:"プロファイル",kFactor:"K値",fill:"充填率",configure:"設定",used:"使用済み",remainingUnit:"残り"},printModal:{title:"印刷を開始",selectPrinter:"プリンターを選択",selectPlate:"プレートを選択",filamentMapping:"フィラメントマッピング",totalCost:"合計コスト:",slotRemainingShort:" - 残{{grams}}g",printSettings:"印刷設定",bedLeveling:"ベッドレベリング",flowCalibration:"フローキャリブレーション",vibrationCalibration:"振動キャリブレーション",layerInspection:"第一層検査",timelapse:"タイムラプス",startPrint:"印刷を開始",addToQueue:"キューに追加",cancel:"キャンセル",noPrintersAvailable:"利用可能なプリンターがありません",printerBusy:"プリンターは使用中です",printerOffline:"プリンターはオフラインです",sameTypeDifferentColor:"同じ種類、異なる色",filamentTypeNotLoaded:"フィラメントタイプが未読み込み",openCalendar:"カレンダーを開く",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"左ノズル",rightNozzleTooltip:"右ノズル",filamentOverride:"フィラメントオーバーライド",filamentOverrideHint:"モデルベースの割り当てに使用するフィラメントをオプションで上書きします。スケジューラは元の3MF値ではなく、選択したフィラメントに基づいてマッチングします。",originalFilament:"オリジナル",overrideWith:"変更先",resetToOriginal:"オリジナルに戻す",insufficientFilamentTitle:"フィラメントが不足しています",insufficientFilamentMessage:"割り当てられたスプールの一部は、この印刷に必要な量より残量が少ないです:",insufficientFilamentLine:"{{printer}} - {{slot}}: 必要 {{required}}g、残り {{remaining}}g",printAnyway:"それでも印刷",forceColorMatch:"カラーマッチを強制",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"{{count}}台のプリンターに段階的に送信",gcodeInjection:"自動印刷G-codeを挿入"},backup:{title:"バックアップと復元",createBackup:"バックアップを作成",restoreBackup:"バックアップの復元",restoreDescription:"バックアップファイルからすべてのデータを置き換える",downloadBackup:"バックアップをダウンロード",uploadBackup:"バックアップをアップロード",lastBackup:"最終バックアップ",autoBackup:"自動バックアップ",backupNow:"今すぐバックアップ",restoreWarning:"警告: バックアップの復元は現在のすべてのデータを上書きします。",includeArchives:"アーカイブを含む",includeSettings:"設定を含む",includeProfiles:"プロファイルを含む",backupSuccess:"バックアップを作成しました",restoreSuccess:"バックアップを復元しました",backupFailed:"バックアップに失敗しました",restoreFailed:"復元に失敗しました",restoreNote:"復元中、仮想プリンターは停止されます",githubBackup:"GitHubバックアップ",enabled:"有効",cloudLoginRequired:"Bambu Cloudログインが必要です。GitHubバックアップを有効にするには、プロファイル → クラウドプロファイルからサインインしてください。",cloudLoginRequiredShort:"Cloudログインが必要",githubDescription:"プロファイルをプライベートGitHubリポジトリに自動的に同期し、バックアップとバージョン履歴を保持します。",repositoryUrl:"リポジトリURL",personalAccessToken:"個人アクセストークン",tokenSaved:"(保存済み)",enterNewToken:"新しいトークンを入力して更新",tokenHint:"Contents読み書き権限を持つきめ細かいトークン",branch:"ブランチ",manualOnly:"手動のみ",hourly:"毎時",daily:"毎日",weekly:"毎週",includeInBackup:"バックアップに含める",kProfiles:"Kプロファイル",kProfilesDescription:"接続されたプリンターからの圧力キャリブレーション",noPrintersConnected:"プリンターが接続されていません",printersConnected:"{{connected}}/{{total}} 接続済み",cloudProfiles:"クラウドプロファイル",cloudProfilesDescription:"Bambu Cloudからのフィラメント、プリンター、プロセスプリセット",appSettings:"アプリ設定",appSettingsDescription:"Bambuddy設定（データベース全体）",spoolInventory:"スプール在庫",spoolInventoryDescription:"フィラメントスプール、使用履歴、コスト追跡",printArchives:"印刷アーカイブ",printArchivesDescription:"印刷履歴メタデータ（gcode/3MFファイルなし）",lastBackupAt:"最終バックアップ:",noBackupsYet:"バックアップはまだありません",next:"次回:",startingBackup:"バックアップを開始しています...",test:"テスト",enableBackup:"バックアップを有効化",testConnection:"接続テスト",enterRepoUrl:"リポジトリURLを入力してください",enterRepoAndToken:"リポジトリURLとアクセストークンを入力してください",repoRequired:"リポジトリURLは必須です",tokenRequired:"アクセストークンは必須です",githubBackupEnabled:"GitHubバックアップが有効になりました",tokenUpdated:"トークンが更新されました",settingsSaved:"設定が保存されました",failedToSave:"保存に失敗しました: {{message}}",backupCompleteFiles:"バックアップ完了 - {{count}}ファイルが更新されました",backupSkippedNoChanges:"バックアップをスキップ - 変更なし",backupFailed2:"バックアップに失敗しました: {{message}}",clearedLogs:"{{count}}件のログを削除しました",failedToClearLogs:"ログの削除に失敗しました: {{message}}",history:"履歴",clear:"クリア",date:"日付",status:"ステータス",commit:"コミット",localBackup:"ローカルバックアップ",localBackupDescription:"データベース、アーカイブ、アップロード、すべてのファイルを含むBambuddyデータの完全なバックアップを作成します。",downloadBackupLabel:"バックアップをダウンロード",completeBackupZip:"完全バックアップ: データベース + 全ファイル (ZIP)",download:"ダウンロード",preparingBackup:"バックアップを準備しています...",creatingArchive:"バックアップアーカイブを作成しています...大きなアーカイブの場合、時間がかかることがあります。",downloadingFile:"バックアップファイルをダウンロードしています...",backupDownloaded:"バックアップのダウンロードが成功しました",failedToCreateBackup:"バックアップの作成に失敗しました: {{message}}",restore:"復元",restoreReplacesAll:"復元はすべてのデータを置き換えます。",restoreReplacesAllDetail:"現在のデータベースとファイルは完全に置き換えられます。復元後に再起動が必要です。",restoreConfirmTitle:"バックアップを復元",restoreConfirmMessage:'"{{filename}}"から復元してもよろしいですか？現在のデータベースとすべてのファイルが完全に置き換えられます。復元後にアプリケーションの再起動が必要です。',restoreConfirmButton:"バックアップを復元",uploadingFile:"バックアップファイルをアップロードしています...",backupRestoredRestart:"バックアップが復元されました。Bambuddyを再起動してください。",failedToRestore:"バックアップの復元に失敗しました。ファイル形式を確認してください。",reloadNow:"今すぐリロード",creatingBackup:"バックアップを作成中",restoringBackup:"バックアップを復元中",preparing:"準備中...",processing:"処理中...",doNotClosePage:"このページを閉じたり、移動しないでください。大きなバックアップの場合、この操作には数分かかることがあります。",restoring:"復元中...",restoreComplete:"復元完了",restoreFailed2:"復元失敗",importSettings:"バックアップファイルから設定をインポート",pleaseWaitRestoring:"データの復元中です。お待ちください",selectBackupFile:"クリックしてバックアップファイルを選択 (.jsonまたは.zip)",duplicateHandling:"重複処理の仕組み:",matchPrinters:"プリンター",matchPrintersBy:"シリアル番号で照合",matchSmartPlugs:"スマートプラグ",matchSmartPlugsBy:"IPアドレスで照合",matchNotificationProviders:"通知プロバイダー",matchNotificationProvidersBy:"名前で照合",matchFilaments:"フィラメント",matchFilamentsBy:"名前 + タイプ + ブランドで照合",matchArchives:"アーカイブ",matchArchivesBy:"コンテンツハッシュで照合（常にスキップ）",matchPendingUploads:"保留中のアップロード",matchPendingUploadsBy:"ファイル名で照合",matchSettingsTemplates:"設定とテンプレート",matchSettingsTemplatesBy:"常に上書き",replaceExisting:"既存のデータを置き換え",keepExisting:"既存のデータを保持",overwriteDescription:"既に存在する項目をバックアップデータで上書き",keepDescription:"まだ存在しない項目のみ復元",overwriteCaution:"注意:",overwriteWarning:"上書きすると、現在の設定がバックアップのデータで置き換えられます。プリンターのアクセスコードはセキュリティのため上書きされません。",cancel:"キャンセル",processingBackup:"バックアップファイルを処理しています...",itemsRestored:"復元済み",itemsSkipped:"スキップ済み",restored:"復元済み",skippedAlreadyExist:"スキップ（既に存在）",filesCategory:"ファイル（3MF、サムネイルなど）",andMore:"...他{{count}}件",newApiKeysGenerated:"新しいAPIキーが生成されました",keysShownOnce:"これらのキーは一度だけ表示されます。今すぐコピーしてください！",copy:"コピー",noDataFound:"バックアップファイルに復元するデータが見つかりませんでした。",close:"閉じる",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"設定",notification_providers:"通知プロバイダー",notification_templates:"通知テンプレート",smart_plugs:"スマートプラグ",printers:"プリンター",filaments:"フィラメント",maintenance_types:"メンテナンスタイプ",archives:"アーカイブ",projects:"プロジェクト",pending_uploads:"保留中のアップロード",external_links:"外部リンク",api_keys:"APIキー"}},tags:{title:"タグ",addTag:"タグを追加",editTag:"タグを編集",deleteTag:"タグを削除",tagName:"タグ名",tagColor:"タグの色",noTags:"タグがありません",deleteConfirm:"このタグを削除しますか？",manageTags:"タグを管理"},uploadModal:{title:"3MFファイルのアップロード",dragDrop:".3mfファイルをここにドラッグ＆ドロップ",or:"または",browseFiles:"ファイルを参照",extractionInfo:"プリンターモデルは3MFファイルのメタデータから自動的に抽出されます。",uploaded:"アップロード済み",failed:"アップロードに失敗しました",uploading:"アップロード中...",upload:"アップロード",uploadFailed:"アップロード失敗"},editArchive:{title:"アーカイブを編集",name:"名前",namePlaceholder:"印刷名",printer:"プリンター",noPrinter:"プリンターなし",project:"プロジェクト",noProject:"プロジェクトなし",itemsPrinted:"印刷数",itemsPrintedHelp:"この印刷ジョブで製造したアイテム数",notes:"メモ",notesPlaceholder:"この印刷についてメモを追加...",externalLink:"外部リンク",externalLinkPlaceholder:"https://...",externalLinkHelp:"Printables、Thingiverse、その他のソースへのリンク",tags:"タグ",tagsPlaceholder:"タグを追加...",addMoreTags:"タグをさらに追加...",matchingTags:'"{{query}}" に一致',existingTags:"既存のタグ",clickToAdd:"（クリックして追加）",status:"ステータス",failureReason:"失敗理由",selectReason:"理由を選択...",photos:"印刷結果の写真",photosHelp:"+ をクリックして印刷結果の写真を追加",printResult:"印刷結果",saving:"保存中...",failureReasons:{adhesionFailure:"定着不良",spaghettiDetached:"スパゲッティ / 剥離",layerShift:"レイヤーシフト",cloggedNozzle:"ノズル詰まり",filamentRunout:"フィラメント切れ",warping:"反り",stringing:"糸引き",underExtrusion:"押出不足",powerFailure:"電源障害",userCancelled:"ユーザーによるキャンセル",other:"その他"},statuses:{completed:"完了",failed:"失敗",aborted:"キャンセル",printing:"印刷中"}},kProfiles:{title:"Kプロファイル",noPrintersConfigured:"プリンターが設定されていません",addPrinterInSettings:"Kプロファイルを管理するには設定でプリンターを追加してください",noActivePrinters:"アクティブなプリンターがありません",enablePrinterConnection:"Kプロファイルを表示するにはプリンター接続を有効にしてください",loadingProfiles:"Kプロファイルを読み込み中...",printerOffline:"プリンターオフライン",printerOfflineDesc:"選択したプリンターは接続されていません。電源を入れてKプロファイルを表示してください。",noMatchingProfiles:"一致するプロファイルなし",noMatchingProfilesDesc:"検索条件に一致するプロファイルがありません",noKProfiles:"Kプロファイルなし",noKProfilesDesc:"{{diameter}}mmノズル用の圧力キャリブレーションプロファイルが見つかりません",createFirstProfile:"最初のプロファイルを作成",printer:"プリンター",nozzle:"ノズル",refresh:"更新",addProfile:"K-プロファイルを追加",export:"エクスポート",import:"インポート",select:"選択",selectAll:"すべて選択",delete:"削除",searchPlaceholder:"名前またはフィラメントで検索...",allExtruders:"すべてのエクストルーダー",leftOnly:"左のみ",rightOnly:"右のみ",allFlow:"すべてのフロー",hfOnly:"HFのみ",sOnly:"Sのみ",sortName:"ソート: 名前",sortKValue:"ソート: K値",sortFilament:"ソート: フィラメント",leftExtruder:"左エクストルーダー",rightExtruder:"右エクストルーダー",modal:{addTitle:"Kプロファイルを追加",editTitle:"Kプロファイルを編集",profileName:"プロファイル名",profileNamePlaceholder:"マイPLAプロファイル",kValue:"K値",kValuePlaceholder:"0.020",kValueHelp:"一般的な範囲: PLA 0.01〜0.06、PETG 0.02〜0.10",filament:"フィラメント",selectFilament:"フィラメントを選択...",noFilamentsHelp:"フィラメントが見つかりません。Bambu Studioでまずプロファイルを作成してください。",flowType:"フロータイプ",highFlow:"ハイフロー",standard:"スタンダード",nozzleSize:"ノズルサイズ",extruder:"エクストルーダー",extruders:"エクストルーダー",left:"左",right:"右",notes:"メモ（ローカル保存）",notesPlaceholder:"このプロファイルのメモを追加...",notesHelp:"メモはBambuddyに保存され、プリンターには保存されません",syncing:"プリンターと同期中...",savingExtruder:"エクストルーダーに保存中 {{current}}/{{total}}...",pleaseWait:"お待ちください"},deleteConfirm:{title:"プロファイルを削除",cannotUndo:"元に戻せません",message:"「{{name}}」をプリンターから削除しますか？"},bulkDelete:{title:"プロファイルを削除",cannotUndo:"元に戻せません",message:"選択した{{count}}件のプロファイルをプリンターから削除しますか？"},toast:{profileSaved:"Kプロファイルを保存しました",profilesSaved:"Kプロファイルを{{count}}台のエクストルーダーに保存しました",selectAtLeastOneExtruder:"エクストルーダーを1つ以上選択してください",profileDeleted:"Kプロファイルを削除しました",profilesDeleted:"{{count}}件のプロファイルを削除しました",exportedProfiles:"{{count}}件のプロファイルをエクスポートしました",importedProfiles:"{{total}} 件中 {{count}} 件のプロファイルをインポートしました",noProfilesToExport:"エクスポートするプロファイルがありません",invalidFileFormat:"無効なファイル形式",failedToParseImport:"インポートファイルの解析に失敗しました",failedToSaveBatch:"Kプロファイルの保存に失敗しました",noteSaved:"メモを保存しました",failedToSaveNote:"メモの保存に失敗しました"},permission:{noRead:"プロファイルを更新する権限がありません",noCreate:"プロファイルを追加する権限がありません",noUpdate:"Kプロファイルを更新する権限がありません",noDelete:"Kプロファイルを削除する権限がありません",noExport:"プロファイルをエクスポートする権限がありません",noImport:"プロファイルをインポートする権限がありません"}},virtualPrinter:{title:"仮想プリンター",running:"稼働中",stopped:"停止",description:{default:"Bambu StudioとOrcaSlicerに表示される仮想プリンターを有効化。このプリンターに送信されたファイルは印刷せずに直接アーカイブされます。",proxy:"スライサーのトラフィックを実際のプリンターに転送するプロキシを有効化。任意のネットワーク経由でリモート印刷が可能です。"},enable:{title:"仮想プリンターを有効化",visibleInSlicer:"スライサーの検出リストに「Bambuddy」として表示",proxyingTo:"{{name}}にプロキシ中",notActive:"非アクティブ"},model:{title:"プリンターモデル",description:"エミュレートするプリンターモデルを選択。",restartWarning:"モデルを変更すると仮想プリンターが再起動されます"},accessCode:{title:"アクセスコード",isSet:"アクセスコードが設定されています",notSet:"アクセスコード未設定 - 有効化に必要です",placeholder:"8文字のコードを入力",placeholderChange:"新しいコードを入力して変更",hint:"正確に8文字必要です。スライサーの認証に使用されます。",charCount:"({{count}}/8)"},targetPrinter:{title:"ターゲットプリンター",configured:"プロキシターゲット設定済み",notConfigured:"ターゲットプリンター未選択 - プロキシモードに必要です",placeholder:"プリンターを選択...",hint:"スライサートラフィックの転送先プリンターを選択。プリンターはLANモードである必要があります。",noPrinters:"プリンターが設定されていません。プロキシモードを使用するにはまずプリンターを追加してください。"},remoteInterface:{title:"ネットワークインターフェース上書き",configured:"インターフェース上書き有効",optional:"オプション — 自動検出IPが間違っている場合に使用（複数NIC、Docker、VPNなど）",placeholder:"自動検出（デフォルト）...",hint:"SSDPで広告され、TLS証明書に使用されるIPアドレスを上書きします。Bambuddyに複数のネットワークインターフェースがある場合に便利です。"},mode:{title:"モード",archive:"アーカイブ",archiveDesc:"ファイルを即座にアーカイブ",review:"レビュー",reviewDesc:"アーカイブ前にレビュー",queue:"キュー",queueDesc:"アーカイブしてキューに追加",proxy:"プロキシ",proxyDesc:"実際のプリンターに転送"},autoDispatch:{title:"自動ディスパッチ",description:"キューに追加されたときに自動的に印刷を開始します。オフの場合、手動ディスパッチを待ちます。"},tailscaleDisabled:{title:"Tailscale統合",description:"有効にすると、Tailscaleを使用して信頼できるTLS証明書を使用します。自己署名証明書のみを使用する場合は無効にします。"},setupRequired:{title:"セットアップが必要です",description:"仮想プリンター機能を使用するには追加のシステム設定が必要です。ポートフォワーディング、ファイアウォールルール、プラットフォーム固有の設定が含まれます。",readGuide:"有効にする前にセットアップガイドをお読みください"},howItWorks:{title:"仕組み",step1:"同じLAN上では、仮想プリンターはスライサー（Bambu Studio / OrcaSlicer）に自動的に表示されます。他のネットワークからは、IPアドレスとアクセスコードで手動で追加してください。",step2:"アーカイブ、レビュー、キューモードでは、スライサーの「送信」ボタンを使用して3MFファイルをBambuddyにアップロードします。スライサーは「印刷成功」と表示しますが、ファイルは保存され、印刷はされません。",step3:"プロキシモードでは、仮想プリンターはすべてのトラフィックを実際のプリンターに転送します。直接接続されているかのように印刷がすぐに開始されます。"},status:{title:"ステータス詳細",printerName:"プリンター名",model:"モデル",serialNumber:"シリアル番号",mode:"モード",pendingFiles:"保留中のファイル",targetPrinter:"ターゲットプリンター",ftpPort:"FTPポート",mqttPort:"MQTTポート",ftpConnections:"FTP接続数",mqttConnections:"MQTT接続数"},toast:{updated:"仮想プリンター設定を更新しました",failedToUpdate:"設定の更新に失敗しました",tailscaleNotAvailable:"このホストにTailscaleがインストールされていません。先にTailscaleをインストールしてから再試行してください。",copyFailed:"コピーに失敗しました — テキストを手動で選択してください",accessCodeRequired:"先にアクセスコードを設定してください",targetPrinterRequired:"先にターゲットプリンターを選択してください",bindIpRequired:"先にバインドIPを設定してください",accessCodeEmpty:"アクセスコードは空にできません",accessCodeLength:"アクセスコードは8文字である必要があります",created:"仮想プリンターを作成しました",failedToCreate:"仮想プリンターの作成に失敗しました",deleted:"仮想プリンターを削除しました",failedToDelete:"仮想プリンターの削除に失敗しました"},list:{title:"仮想プリンター",add:"追加",addFirst:"仮想プリンターを追加",empty:"仮想プリンターが設定されていません。追加して始めましょう。"},bindIp:{title:"バインドインターフェース",placeholder:"インターフェースを選択...",hint:"この仮想プリンターがバインドするネットワークインターフェース。プリンターごとに一意である必要があります。"},proxy:{accessCodeHint:"プロキシモードでは、スライサーにターゲットプリンターのアクセスコードを使用してください。接続は実際のプリンターに透過的に転送されます。"},addDialog:{title:"仮想プリンターを追加",name:"名前",hint:"アクセスコード、ターゲットプリンター、その他の設定は作成後に設定できます。",create:"作成"},deleteConfirm:{title:"仮想プリンターを削除",message:"「{{name}}」を削除してもよろしいですか？このプリンターのすべてのサービスが停止されます。"},archiveNameSource:{title:"アーカイブ名のソース",description:"仮想プリンター経由でファイルが到着したときに、新しいアーカイブをどのように命名するかを選択します。「メタデータ」は3MFに埋め込まれたスライサータイトル（デフォルト）を使用します。「ファイル名」はBambu StudioがFTPで送信したファイル名を使用します — 「プリンターに送信」ダイアログでジョブ名を変更した場合に便利です。",metadata:"メタデータ",filename:"ファイル名"}},modelViewer:{openInSlicer:"スライサーで開く",tabs:{model:"3Dモデル",gcode:"G-codeプレビュー"},notAvailable:"利用不可",notSliced:"未スライス",plates:"プレート",allPlates:"全プレート",plateNumber:"プレート {{number}}",plateCount:"{{count}} プレート",plateCount_other:"{{count}} プレート",objectCount:"{{count}} オブジェクト",objectCount_other:"{{count}} オブジェクト",filamentCount:"{{count}} フィラメント",filamentCount_other:"{{count}} フィラメント",eta:"予想時間 {{minutes}} 分",noPreview:"このファイルのプレビューは利用できません",pagination:{pageOf:"ページ {{current}} / {{total}}",prev:"前へ",next:"次へ"},errors:{failedToLoad:"ファイルの読み込みに失敗しました",noMeshes:"3MFファイルにメッシュが見つかりません",unsupportedFormat:"サポートされていないファイル形式です"}},maintenanceDescriptions:{lubricateCarbonRods:"カーボンロッドに潤滑剤を塗布してスムーズな動きを確保",lubricateRails:"リニアレールの潤滑",cleanNozzle:"ノズル/ホットエンドの清掃",checkBelts:"ベルト張力の確認",cleanBuildPlate:"ビルドプレートの清掃",checkExtruder:"エクストルーダーギアの確認",checkCooling:"冷却ファンの確認",generalInspection:"総合点検",cleanCarbonRods:"カーボンロッドの清掃",lubricateSteelRods:"スチールロッドに潤滑剤を塗布してスムーズな動きを確保",cleanSteelRods:"スチールロッドの清掃",cleanLinearRails:"リニアレールを拭いてほこりや汚れを除去",checkPtfeTube:"PTFEチューブの確認",replaceHepaFilter:"HEPAフィルター交換",replaceCarbonFilter:"カーボンフィルター交換",lubricateLeftNozzleRail:"左ノズルレールの潤滑"},smartPlugs:{offline:"オフライン",admin:"管理",openPlugAdminPage:"プラグ管理ページを開く",deleteSmartPlug:"スマートプラグを削除",turnOnSmartPlug:"スマートプラグをオンにする",turnOffSmartPlug:"スマートプラグをオフにする",turnOn:"オンにする",turnOff:"オフにする",addSmartPlug:{scanningNetwork:"ネットワークをスキャン中...",chooseEntity:"エンティティを選択...",connectionFailed:"接続失敗",searchEntities:"エンティティを検索...",searchPowerSensors:"電力センサーを検索...",searchEnergySensors:"エネルギーセンサーを検索...",placeholders:{plugName:"リビングルームプラグ",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"電力トピックと同じ、または異なる"}},linkedTo:"リンク先:",monitorOnly:"監視のみ",alerts:"アラート",scheduleOn:"オン {{time}}",scheduleOff:"オフ {{time}}",on:"オン",off:"オフ",power:"電力",kwhToday:"本日のkWh",settings:"設定",automationSettings:"自動化設定",showInSwitchbar:"スイッチバーに表示",quickAccessSidebar:"サイドバーからクイックアクセス",enabled:"有効",enableAutomation:"このプラグの自動化を有効にする",autoOn:"自動オン",autoOnDescription:"印刷開始時にオンにする",autoOff:"自動オフ",autoOffDescription:"印刷完了時にオフにする（ワンショット）",autoOffPersistent:"有効のまま維持",autoOffPersistentDescription:"ワンショットではなく印刷間で有効のまま維持",turnOffDelayMode:"オフ遅延モード",time:"時間",temp:"温度",delayMinutes:"遅延（分）",tempThreshold:"温度しきい値（°C）",tempThresholdDescription:"ノズルがこの温度以下に冷却されるとオフになります",edit:"編集",deleteConfirm:'"{{name}}"を削除してもよろしいですか？この操作は取り消せません。',turnOnConfirm:'"{{name}}"をオンにしてもよろしいですか？',turnOffConfirm:'"{{name}}"をオフにしてもよろしいですか？接続されたデバイスの電源が切れます。',failedToTurn:'"{{name}}"を{{action}}できませんでした',unknown:"不明",addTitle:"スマートプラグを追加",editTitle:"スマートプラグを編集",stopScanning:"スキャン停止",discoverTasmota:"Tasmotaデバイスを検出",foundDevices:"{{count}}台のデバイスが見つかりました - クリックして選択:",noDevicesFound:"ネットワーク上にTasmotaデバイスが見つかりません",haNotConfigured:"Home Assistantが設定されていません。設定場所:",haSettingsPath:"設定 → ネットワーク → Home Assistant",selectEntity:"エンティティを選択 *",ipAddress:"IPアドレス *",nameLabel:"名前 *",username:"ユーザー名",password:"パスワード",authHint:"Tasmotaデバイスが認証を必要としない場合は空のままにしてください",linkToPrinter:"プリンターにリンク",noPrinter:"プリンターなし（手動制御のみ）",linkingDescription:"リンクすると印刷開始/完了時に自動でオン/オフできます",powerAlerts:"電力アラート",alertAbove:"上限アラート（W）",alertBelow:"下限アラート（W）",alertDescription:"電力消費がこれらのしきい値を超えた場合に通知します。無効にするには空のままにしてください。",dailySchedule:"デイリースケジュール",turnOnAt:"オンにする時刻",turnOffAt:"オフにする時刻",scheduleDescription:"毎日これらの時刻にプラグを自動的にオン/オフします。スキップするには空のままにしてください。",showOnPrinterCard:"プリンターカードに表示",displayOnPrinterCard:"プリンターカードにボタンを表示",connectedResult:"接続成功！",deviceLabel:"デバイス: {{name}} - ",stateLabel:"状態: {{state}}",test:"テスト",delete:"削除",save:"保存",add:"追加",cancel:"キャンセル",failedToStartScan:"スキャンを開始できませんでした",nameRequired:"名前は必須です",entityRequired:"Home AssistantプラグにはエンティティIDが必要です",mqttTopicRequired:"電力、エネルギー、または状態監視用に少なくとも1つのMQTTトピックを設定する必要があります",loadingEntities:"エンティティを読み込み中...",loading:"読み込み中...",failedToLoadEntities:"エンティティの読み込みに失敗しました: {{error}}",noEntitiesMatching:'"{{search}}"に一致するエンティティが見つかりません',noEntitiesAvailable:"利用可能なエンティティがありません",searchingEntities:"すべてのエンティティを検索中（{{count}}件見つかりました）",showingEntities:"switch、light、input_booleanを表示（{{count}}件利用可能）",energyMonitoringOptional:"エネルギー監視（オプション）",energyMonitoringHint:"電力/エネルギーデータを提供するセンサーを検索して選択します。",powerSensorW:"電力センサー（W）",energyTodayKwh:"本日のエネルギー（kWh）",totalEnergyKwh:"総エネルギー（kWh）",noMatchingSensors:"一致するセンサーがありません",none:"なし",mqttNotConfigured:"MQTTブローカーが設定されていません。ブローカーアドレスを設定してください:",mqttSettingsPath:"設定 → ネットワーク → MQTT配信",mqttNotConfiguredSuffix:"（配信を有効にする必要はありません。ブローカーの詳細を入力するだけです）。",mqttMonitorOnlyDescription:"MQTTプラグはMQTTサブスクリプション経由で電力/エネルギーデータを受信します。オン/オフ制御は利用できません - MQTTブローカーまたはホームオートメーションシステムを使用してください。",powerMonitoring:"電力監視",energyMonitoring:"エネルギー監視",stateMonitoring:"状態監視",optional:"オプション",topic:"トピック",jsonPath:"JSONパス",multiplier:"乗数",onValue:"ON値",mqttPowerHint:`JSONパスはJSONペイロードから値を抽出します（例: "power_l1"）。トピックが生の数値を送信する場合は空のままにしてください。
 乗数: mW→Wは0.001、kW→Wは1000を使用。`,mqttEnergyHint:`JSONパスはJSONペイロードから値を抽出します。生の値の場合は空のままにしてください。
 乗数: Wh→kWhは0.001、MWh→kWhは1000を使用。`,mqttStateHint:`JSONパスはJSONペイロードから値を抽出します。生の値の場合は空のままにしてください。
-ON値: "ON"を意味する正確な文字列。自動検出（ON、true、1）の場合は空のままにしてください。`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"電力URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"電力乗数",restEnergyUrl:"エネルギーURL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"エネルギー乗数",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"電力データ用の個別URL（空欄の場合はステータスURLを使用）",restEnergyUrlHint:"エネルギーデータ用の個別URL（空欄の場合はステータスURLを使用）",restEnergyHint:"各値は個別のURLを使用するか、ステータスURLにフォールバックできます。乗数で単位変換が可能です（例：WhからkWhへの変換は0.001）。",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"スイッチバーにスイッチがありません",enableSwitchbarHint:"設定 > スマートプラグで「スイッチバーに表示」を有効にしてください"},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"メール",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTPメール通知",telegram:"Telegramボット経由の通知",discord:"Webhook経由でDiscordチャンネルに送信",ntfy:"無料のセルフホスト可能なプッシュ通知",pushover:"シンプルで信頼性の高いプッシュ通知",callmebot:"CallMeBot経由の無料WhatsApp通知",webhook:"任意のURLへの汎用HTTP POST",homeassistant:"Home Assistantダッシュボードの永続通知"},lastSuccess:"最終: {{date}}",error:"エラー",printer:"プリンター:",allPrinters:"すべてのプリンター",sendTestNotification:"テスト通知を送信",eventSettings:"イベント設定",enabled:"有効",sendFromProvider:"このプロバイダーから通知を送信",printEvents:"印刷イベント",printerStatus:"プリンターステータス",amsAlarms:"AMSアラーム",amsHtAlarms:"AMS-HTアラーム",printQueue:"印刷キュー",start:"開始",plateCheck:"プレートチェック",complete:"完了",failed:"失敗",stopped:"停止",progress:"進捗",offline:"オフライン",lowFilament:"フィラメント残量低下",maintenance:"メンテナンス",amsHumidity:"AMS湿度",amsTemp:"AMS温度",amsHtHumidity:"AMS-HT湿度",amsHtTemp:"AMS-HT温度",bedCooled:"ベッド冷却済み",firstLayer:"第1層完了",quiet:"静音",digest:"ダイジェスト {{time}}",printStarted:"印刷開始",plateNotEmpty:"プレートが空でない",plateNotEmptyDescription:"印刷前にオブジェクトが検出されました",printCompleted:"印刷完了",bedCooledLabel:"ベッド冷却済み",bedCooledDescription:"印刷後にベッドがしきい値以下に冷却",firstLayerCompleteLabel:"第1層完了",firstLayerCompleteDescription:"第1層完了時にスナップショット付きで通知",missingSpoolAssignmentLabel:"スプール割り当て不足",missingSpoolAssignmentDescription:"印刷開始時に必要トレイへスプールが未割り当ての場合に通知",printFailed:"印刷失敗",printStopped:"印刷停止",progressMilestones:"進捗マイルストーン",progressMilestonesDescription:"25%、50%、75%で通知",printerOffline:"プリンターオフライン",printerError:"プリンターエラー",lowFilamentLabel:"フィラメント残量低下",maintenanceDue:"メンテナンス期限",maintenanceDueDescription:"メンテナンスが必要な場合に通知",amsHumidityHigh:"AMS湿度高",amsHumidityHighDescription:"通常AMSの湿度がしきい値を超過",amsTemperatureHigh:"AMS温度高",amsTemperatureHighDescription:"通常AMSの温度がしきい値を超過",amsHtHumidityHigh:"AMS-HT湿度高",amsHtHumidityHighDescription:"AMS-HTの湿度がしきい値を超過",amsHtTemperatureHigh:"AMS-HT温度高",amsHtTemperatureHighDescription:"AMS-HTの温度がしきい値を超過",jobAdded:"ジョブ追加",jobAddedDescription:"キューにジョブが追加されました",jobAssigned:"ジョブ割り当て",jobAssignedDescription:"モデルベースのジョブがプリンターに割り当てられました",jobStarted:"ジョブ開始",jobStartedDescription:"キュージョブの印刷が開始されました",jobWaiting:"ジョブ待機中",jobWaitingDescription:"フィラメントまたはプリンター待ちのジョブ",jobSkipped:"ジョブスキップ",jobSkippedDescription:"ジョブがスキップされました（前のジョブが失敗）",jobFailed:"ジョブ失敗",jobFailedDescription:"ジョブの開始に失敗しました",queueComplete:"キュー完了",queueCompleteDescription:"すべてのキュージョブが完了しました",quietHours:"静音時間",noNotificationsDuring:"この時間帯は通知を送信しません",editProviderToChangeQuietHours:"プロバイダーを編集して静音時間を変更",dailyDigest:"デイリーダイジェスト",batchNotifications:"通知をまとめて1日のサマリーとして送信",sendAt:"{{time}}に送信",editProviderToChangeDigestTime:"プロバイダーを編集してダイジェスト時刻を変更",edit:"編集",deleteProvider:"通知プロバイダーを削除",deleteConfirm:'"{{name}}"を削除してもよろしいですか？この操作は取り消せません。',delete:"削除",addTitle:"通知プロバイダーを追加",editTitle:"通知プロバイダーを編集",nameLabel:"名前 *",namePlaceholder:"マイ通知",providerTypeLabel:"プロバイダータイプ *",configuration:"設定",testConfiguration:"設定をテスト",printerFilter:"プリンターフィルター",onlyFromPrinter:"このプリンターからのイベントのみ通知を送信",quietHoursDnd:"静音時間（おやすみモード）",quietStart:"開始",quietEnd:"終了",dailyDigestLabel:"デイリーダイジェスト",sendDigestAt:"ダイジェスト送信時刻",digestCollected:"イベントが収集され、この時刻にまとめて送信されます",notificationEvents:"通知イベント",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（印刷完了後）",eventPriority:{sectionTitle:"ntfy 優先度",helpNtfy:"有効な各イベントに優先度を選択してください。ntfy はこれを使って通知の挙動（音、表示、プッシュ動作）を切り替えます。ここで設定していないレベルは ntfy サーバーのデフォルトを使用します。",min:"最小",low:"低",default:"デフォルト",high:"高",urgent:"緊急"},cancel:"キャンセル",save:"保存",add:"追加",nameRequired:"名前は必須です",fieldRequired:"{{field}}は必須です",phoneNumber:"電話番号",apiKey:"APIキー",serverUrl:"サーバーURL",topic:"トピック",authToken:"認証トークン",userKey:"ユーザーキー",appToken:"アプリトークン",priority:"優先度",botToken:"ボットトークン",chatId:"チャットID",smtpServer:"SMTPサーバー",smtpPort:"SMTPポート",security:"セキュリティ",authentication:"認証",username:"ユーザー名",password:"パスワード",fromEmail:"送信元メール",toEmail:"宛先メール",webhookUrl:"Webhook URL",payloadFormat:"ペイロード形式",authorization:"認可",titleFieldName:"タイトルフィールド名",messageFieldName:"メッセージフィールド名",editTemplate:"テンプレートを編集: {{name}}",titleLabel:"タイトル",bodyLabel:"本文",titlePlaceholder:"通知タイトル...",bodyPlaceholder:"通知本文...",availableVariables:"利用可能な変数",clickToInsert:"クリックして本文のカーソル位置に挿入",livePreview:"ライブプレビュー",hide:"非表示",show:"表示",loadingPreview:"プレビューを読み込み中...",enterTemplateContent:"テンプレートの内容を入力するとプレビューが表示されます",titlePreview:"タイトル:",bodyPreview:"本文:",resetToDefault:"デフォルトにリセット",titleRequired:"タイトルは必須です",bodyRequired:"本文は必須です",notificationLog:"通知ログ",showFailedOnly:"失敗のみ",last24Hours:"過去24時間",last7Days:"過去7日間",last30Days:"過去30日間",last90Days:"過去90日間",justNow:"たった今",noFailedNotifications:"失敗した通知はありません",noNotificationsLogged:"記録された通知はありません",unknownProvider:"不明なプロバイダー",logTitle:"タイトル",logMessage:"メッセージ",logError:"エラー",logProvider:"プロバイダー: {{type}}",logTime:"時刻: {{time}}",refresh:"更新",clearOld:"古いものを削除",statsSummary:"過去{{days}}日間:",statsNotifications:"通知",statsSent:"{{count}}件送信",statsFailed:"{{count}}件失敗",eventTypes:{print_start:"印刷開始",print_complete:"印刷完了",print_failed:"印刷失敗",print_stopped:"印刷停止",print_progress:"進捗",printer_offline:"プリンターオフライン",printer_error:"プリンターエラー",filament_low:"フィラメント残量低下",maintenance_due:"メンテナンス期限",test:"テスト"},userEmail:{title:"通知",emailNotifications:"メール通知",emailNotificationsDesc:"自分の印刷ジョブに対してメール通知を受け取ります。メールは高度な認証で設定されたSMTP設定を使用して送信されます。",sendingTo:"通知の送信先",noEmailWarning:"アカウントにメールアドレスが設定されていません。管理者に連絡して追加してもらってください。",printJobNotifications:"印刷ジョブ通知",printJobNotificationsDesc:"送信した印刷ジョブのどのイベントでメール通知を送るかを選択します。",printJobStarts:"印刷ジョブ開始",printJobStartsDesc:"印刷ジョブが開始されたときに通知を受け取る。",printJobFinishes:"印刷ジョブ完了",printJobFinishesDesc:"印刷ジョブが正常に完了したときに通知を受け取る。",printErrors:"印刷エラー",printErrorsDesc:"印刷ジョブが失敗またはエラーが発生したときに通知を受け取る。",printJobStops:"印刷ジョブ停止",printJobStopsDesc:"印刷ジョブがキャンセルまたは停止されたときに通知を受け取る。",saveSuccess:"通知設定を保存しました。",saveError:"通知設定の保存に失敗しました。"}},richTextEditor:{bold:"太字",italic:"斜体",underline:"下線",bulletList:"箇条書きリスト",numberedList:"番号付きリスト",alignLeft:"左揃え",alignCenter:"中央揃え",alignRight:"右揃え",addLink:"リンクを追加",removeLink:"リンクを削除"},externalLinks:{noLinksConfigured:"外部リンクが設定されていません",deleteLink:"リンクを削除",removeCustomIcon:"カスタムアイコンを削除",openInNewTab:"新しいタブで開く",placeholders:{linkName:"マイリンク"}},keyboardShortcuts:{title:"キーボードショートカット",navigation:"ナビゲーション",archivesSection:"アーカイブ",kProfilesSection:"Kプロファイル",generalSection:"全般",shortcuts:{goToPrinters:"プリンターへ移動",goToArchives:"アーカイブへ移動",goToQueue:"キューへ移動",goToStats:"統計へ移動",goToProfiles:"クラウドプロファイルへ移動",goToSettings:"設定へ移動",focusSearch:"検索にフォーカス",openUploadModal:"アップロードモーダルを開く",clearSelection:"選択をクリア / 入力をぼかす",contextMenu:"カードのコンテキストメニュー",refreshProfiles:"プロファイルを更新",newProfile:"新しいプロファイル",exitSelectionMode:"選択モードを終了",showHelp:"このヘルプを表示"},footer:"Escキーを押すか外側をクリックして閉じます"},notificationLog:{title:"通知ログ",events:{printStarted:"印刷開始",printComplete:"印刷完了",printFailed:"印刷失敗",printStopped:"印刷停止",progress:"進捗",printerOffline:"プリンターオフライン",printerError:"プリンターエラー",lowFilament:"フィラメント残量低下",maintenanceDue:"メンテナンス期限",test:"テスト"},timeAgo:{justNow:"たった今",minutesAgo:"{{minutes}}分前",hoursAgo:"{{hours}}時間前"}},restoreBackup:{title:"バックアップを復元",restoring:"復元中...",restoreComplete:"復元完了",restoreFailed:"復元失敗",importSettings:"バックアップファイルから設定をインポート",pleaseWait:"データの復元中です。しばらくお待ちください",clickToSelect:"クリックしてバックアップファイルを選択（.jsonまたは.zip）",howDuplicateHandling:"重複の処理方法:",categories:{printers:"プリンター",smartPlugs:"スマートプラグ",notificationProviders:"通知プロバイダー",filaments:"フィラメント",archives:"アーカイブ",pendingUploads:"保留中のアップロード",settingsTemplates:"設定とテンプレート"},matchingInfo:{printers:"シリアル番号で照合",smartPlugs:"IPアドレスで照合",notificationProviders:"名前で照合",filaments:"名前+タイプ+ブランドで照合",archives:"コンテンツハッシュで照合",pendingUploads:"ファイル名で照合",settingsTemplates:"常に上書き"},replaceExisting:"既存データを置き換え",keepExisting:"既存データを保持",replaceDescription:"既に存在するアイテムをバックアップデータで上書き",keepDescription:"まだ存在しないアイテムのみを復元",caution:"注意:",cautionText:"上書きすると現在の構成がバックアップデータに置き換えられます。セキュリティ上の理由から、プリンターのアクセスコードは上書きされません。",itemsRestored:"復元されたアイテム",itemsSkipped:"スキップされたアイテム",restored:"復元済み",skipped:"スキップ（既に存在）",filesLabel:"ファイル（3MF、サムネイルなど）",newApiKeysGenerated:"新しいAPIキーが生成されました",newApiKeysWarning:"これらのキーは一度だけ表示されます。今すぐコピーしてください！",processingBackup:"バックアップファイルを処理中...",noDataFound:"バックアップファイルに復元するデータが見つかりませんでした。",failedToRestore:"バックアップの復元に失敗しました。ファイル形式を確認してください。"},backupExport:{title:"バックアップをエクスポート",selectData:"含めるデータを選択",selectAll:"すべて選択",selectNone:"なし",categoryDescriptions:{settings:"言語、テーマ、更新設定",notifications:"ntfy、Pushover、Discordなど",templates:"カスタムメッセージテンプレート",smartPlugs:"Tasmotaプラグ設定",externalLinks:"サイドバーの外部サービスへのリンク",printers:"プリンター情報（アクセスコード除外）",plateDetection:"空プレート参照画像",filaments:"フィラメントの種類とコスト",maintenance:"カスタムメンテナンススケジュール",archives:"すべての印刷データ+ファイル（3MF、サムネイル、写真）",projects:"プロジェクト、BOMアイテム、添付ファイル",pendingUploads:"仮想プリンターアップロード待機中",apiKeys:"Webhook APIキー（インポート時に新しいキーが生成されます）"},requiresPrinters:"プリンターを選択する必要があります",zipFileWarning:"ZIPファイルが作成されます。",zipFileDescription:"すべての3MFファイル、サムネイル、タイムラプス、写真が含まれます。これには時間がかかり、大きなファイルになる可能性があります。",includeAccessCodes:"アクセスコードを含める",includeAccessCodesDescription:"別のマシンへの転送用",includeAccessCodesWarning:"アクセスコードはプレーンテキストで含まれます。このバックアップファイルを安全に保管してください！",categoriesSelected:"{{selectedCount}}カテゴリー選択済み"},pendingUploads:{placeholders:{notes:"この印刷に関するメモを追加..."},discardUpload:"アップロードを破棄",archiveAllUploads:"すべてのアップロードをアーカイブ",discardAllUploads:"すべてのアップロードを破棄",archive:"アーカイブ",timeAgo:{justNow:"たった今",minutesAgo:"{{minutes}}分前",hoursAgo:"{{hours}}時間前",daysAgo:"{{days}}日前"}},apiBrowser:{placeholders:{requestBody:"JSONリクエストボディ...",searchEndpoints:"エンドポイントを検索..."}},configureAmsSlot:{title:"AMSスロットの設定",slotConfigured:"スロットを設定しました！",configuringSlot:"スロットを設定中：",slotLabel:"{{ams}} スロット {{slot}}",searchPresets:"プリセットを検索...",colorPlaceholder:"色名またはHex（例: 茶色、FF8800）",clearCustomColor:"カスタム色をクリア",noCloudPresets:"クラウドプリセットがありません。Bambu Cloudにログインして同期してください。",noPresetsAvailable:"プリセットがありません。Bambu Cloudにログインするか、ローカルプロファイルをインポートしてください。",noMatchingPresets:"一致するプリセットが見つかりません。",custom:"カスタム",builtin:"内蔵",settingsSentToPrinter:"設定をプリンターに送信しました",filamentProfile:"フィラメントプロファイル",kProfileLabel:"Kプロファイル（Pressure Advance）",filteringFor:"フィルター中: {{material}}",noKProfile:"Kプロファイルなし（デフォルト0.020を使用）",noMatchingKProfiles:"一致するKプロファイルが見つかりません。デフォルトK=0.020が使用されます。",selectFilamentFirst:"まずフィラメントプロファイルを選択してください",kFromCalibration:"K={{value}}（プリンターキャリブレーションから）",customColorLabel:"カスタム色（オプション）",presetColors:"{{name}}の色：",showLessColors:"色を減らす",showMoreColors:"色をもっと表示",clear:"クリア",hexLabel:"Hex: #{{hex}}",resetting:"リセット中...",resetSlot:"スロットをリセット",cancel:"キャンセル",configuring:"設定中...",configureSlot:"スロットを設定"},githubBackup:{title:"GitHubバックアップ",history:"履歴",downloadBackup:"バックアップをダウンロード",restoreBackup:"バックアップを復元",noBackupsYet:"バックアップはまだありません"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"タグを検索...",renameTag:"タグ名を変更",deleteTag:"タグを削除"},notificationTemplates:{placeholders:{title:"通知タイトル...",body:"通知本文..."}},batchTag:{placeholders:{newTag:"新しいタグを入力..."}},photoGallery:{deletePhoto:"写真を削除"},filamentHoverCard:{copySpoolUuid:"スプールUUIDをコピー"},kProfilesView:{hasNote:"メモあり",copyProfile:"プロファイルをコピー"},layout:{openMenu:"メニューを開く",noPermissionSystemInfo:"システム情報を表示する権限がありません"},dashboard:{dragToReorder:"ドラッグして並べ替え",hideWidget:"ウィジェットを非表示"},notificationProviderCard:{deleteNotificationProvider:"通知プロバイダーを削除"},fileManagerModal:{closeFileManager:"ファイルマネージャーを閉じる",sortFiles:"ファイルを並べ替え",goToParentFolder:"親フォルダーへ移動",threeView:"3Dビュー"},embeddedCameraViewer:{refreshStream:"ストリームを更新",close:"閉じる",zoomOut:"ズームアウト",resetZoom:"ズームをリセット",zoomIn:"ズームイン",dragToResize:"ドラッグしてサイズ変更"},timelapseViewer:{skipBack5s:"5秒戻る",skipForward5s:"5秒進む"},notificationProviders:{descriptions:{email:"SMTP電子メール通知",telegram:"Telegramボット経由の通知",discord:"Webhookを介してDiscordチャンネルに送信",ntfy:"無料でセルフホスト可能なプッシュ通知",pushover:"シンプルで信頼性の高いプッシュ通知",callmebot:"CallMeBot経由の無料WhatsApp通知",webhook:"任意のURLへのジェネリックHTTP POST"}},logViewer:{searchPlaceholder:"メッセージまたはロガー名を検索...",noLogEntries:"ログエントリが見つかりません"},switchbarPopover:{noSwitchesInSwitchbar:"スイッチバーにスイッチがありません"},projectPageModal:{placeholders:{title:"タイトル",designer:"デザイナー",license:"ライセンス",description:"説明を入力...",profileTitle:"プロファイルタイトル",profileDescription:"プロファイルの説明..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"待機中",justNow:"たった今",now:"今すぐ",minsAgo:"{{count}}分前",inMins:"あと{{count}}分",hoursAgo:"{{count}}時間前",inHours:"あと{{count}}時間",daysAgo:"{{count}}日前",inDays:"あと{{count}}日"},spoolbuddy:{nav:{dashboard:"ダッシュボード",ams:"AMS",inventory:"インベントリ",writeTag:"書込み",settings:"設定"},status:{nfcReady:"NFC準備完了",nfcOff:"NFCオフ",offline:"オフライン",online:"オンライン",noPrinters:"プリンターなし",deviceOffline:"デバイスオフライン",waitingConnection:"デバイス接続を待っています...",systemReady:"システム準備完了",status:"ステータス"},dashboard:{readyToScan:"スキャン準備完了",idleMessage:"スプールを計量台に置いて識別します",nfcHint:"NFCタグは自動的に読み取られます",device:"デバイス",syncWeight:"重量同期",weightSynced:"同期完了！",unknownTag:"不明なタグ",newTag:"新しいタグを検出",onScale:"計量中",linkSpool:"スプールにリンク",linkTagTitle:"タグをスプールにリンク",linkTag:"タグをリンク",selectSpool:"このタグにリンクするスプールを選択:",noUntagged:"タグなしのスプールが見つかりません",tagDetected:"タグ検出",noTag:"タグなし",tagId:"タグ",grossWeight:"総重量",spoolSize:"スプールサイズ",close:"閉じる",currentSpool:"現在のスプール",plateReady:"プレート準備完了: {{name}}",plateReadyLabel:"片付け待ちプレート",plateClearAction:"片付け",plateClearedToast:"プレートを片付け済みにしました",plateClearFailed:"プレートを片付け済みにできませんでした"},modal:{spoolDetected:"スプール検出",assignToAms:"AMSに割り当て",syncWeight:"重量同期",weightSynced:"同期完了！",syncing:"同期中...",newTagDetected:"新しいタグを検出",addToInventory:"インベントリに追加",assignToAmsTitle:"AMSに割り当て",selectSlot:"スロットを選択",assign:"割り当て",assigning:"割り当て中...",assignSuccess:"割り当て完了！",assignError:"スプールの割り当てに失敗しました。再試行してください。",noPrinterSelected:"プリンターを選択...",noAmsDetected:"このプリンターにAMSが検出されません",slot:"スロット"},weight:{noReading:"読み取りなし",stable:"安定",measuring:"計測中...",tare:"風袋引き",calibrate:"キャリブレーション"},spool:{remaining:"残量",material:"素材",brand:"ブランド",color:"色",coreWeight:"コア",labelWeight:"ラベル",scaleWeight:"計量",netWeight:"正味",lastUsed:"最終使用"},ams:{noData:"AMSが検出されません",connectAms:"AMSを接続してスロットを表示",noPrinter:"プリンター未選択",selectPrinter:"上部バーからプリンターを選択",printerDisconnected:"プリンター切断",humidity:"湿度",level:"レベル",active:"アクティブ",slot:"スロット",empty:"空"},inventory:{search:"スプールを検索...",empty:"インベントリにスプールがありません",noResults:"一致するスプールがありません",spools:"スプール",addSpool:"スプール追加"},settings:{tabDevice:"デバイス",tabDisplay:"ディスプレイ",tabScale:"計量",tabUpdates:"アップデート",nfcReader:"NFCリーダー",type:"タイプ",connection:"接続",notConnected:"N/A",deviceInfo:"デバイス情報",hostname:"ホスト",uptime:"稼働時間",brightness:"明るさ",saved:"保存済み",noBacklight:"DSIバックライトが検出されませんでした。明るさ制御にはDSIディスプレイが必要です。",screenBlank:"画面オフタイムアウト",screenBlankDesc:"操作がないと画面がオフになります。タッチで復帰。",displayNote:"明るさはソフトウェアフィルターとして適用されます。",scaleCalibration:"計量キャリブレーション",currentWeight:"現在の重量",tareOffset:"風袋",calFactor:"係数",knownWeight:"既知の重量",calStep1:"計量台からすべてのアイテムを取り除き、ゼロ設定を押してください。",calStep2:"既知の重量を計量台に置いてください。",setZero:"ゼロ設定",calibrateNow:"キャリブレーション",calibrated:"キャリブレーション済み",tareSet:"風袋コマンドを送信しました。デバイスを待っています...",tareFailed:"風袋コマンドの送信に失敗しました",zeroSet:"ゼロ点を設定しました。既知の重量を計量台に置いてください。",calibrationDone:"キャリブレーション完了！",calibrationFailed:"キャリブレーションに失敗しました",lastCalibrated:"最終キャリブレーション",stable:"安定",settling:"安定化中...",firmware:"ファームウェア",scale:"計量",noDevice:"SpoolBuddyデバイスが見つかりません",daemonVersion:"デーモンバージョン",currentVersion:"現在",versionPending:"デーモンを待っています...",checking:"確認中...",checkUpdates:"アップデートを確認",updateAvailable:"アップデートあり",updateInstructions:"SSH経由で更新：SpoolBuddyインストールスクリプトを実行してください。",upToDate:"最新です",includeBeta:"ベータ版を含む",systemConfig:"バックエンドと認証",backendUrl:"BambuddyバックエンドURL",apiToken:"APIトークン",apiTokenPlaceholder:"APIトークンを入力",saveConfig:"設定を保存",systemQueued:"設定をキューに追加しました。",systemFieldsRequired:"バックエンドURLは必須です。",nfcDiagnostic:"NFC診断",scaleDiagnostic:"スケール診断",readTagDiagnostic:"タグ読み取り診断",testNfc:"リーダーをテスト",testScale:"精度をテスト",testReadTag:"タグを読み取り"},writeTag:{tabExisting:"既存のスプール",tabNew:"新規スプール",tabReplace:"タグ交換",searchPlaceholder:"素材、色、ブランドで検索...",noUntaggedSpools:"タグなしのスプールがありません",noTaggedSpools:"タグ付きのスプールがありません",selectSpool:"スプールを選択し、NTAGをリーダーに置いてください",placeTag:"NTAGをリーダーに置いてください",tagReady:"タグ検出 — 書込み準備完了",writeTag:"タグ書込み",replaceTag:"タグ交換",writing:"タグ書込み中...",waiting:"SpoolBuddyを待機中...",writeSuccess:"タグの書込みが完了しました！",writeFailed:"書込み失敗",queueFailed:"書込みコマンドのキューに失敗しました",tryAgain:"再試行",cancel:"キャンセル",replaceWarning:"古いタグのリンクが解除され、新しいタグに置き換わります。",deviceOffline:"SpoolBuddyはオフラインです",material:"素材",colorName:"色名",color:"色",brand:"ブランド",weight:"重量 (g)",createSpool:"スプール作成",creating:"作成中...",spoolCreated:"スプール作成完了！書込み準備ができました。",createFailed:"スプールの作成に失敗しました"},quickMenu:{printerPower:"プリンター電源",systemControls:"システム",restartDaemon:"デーモン再起動",restartBrowser:"ブラウザ再起動",reboot:"再起動",shutdown:"シャットダウン",swipeToClose:"下にスワイプして閉じる",confirmTitle:"確認",confirmShutdown:"SpoolBuddyをシャットダウンしますか？再起動するには物理的なアクセスが必要です。",confirmReboot:"SpoolBuddyを再起動しますか？",confirmRestartDaemon:"SpoolBuddyデーモンを再起動しますか？NFCとスケールが一時的に使用できなくなります。",confirmRestartBrowser:"キオスクブラウザを再起動しますか？画面が一時的に暗くなります。",confirm:"確認",confirmPlugOn:"{{name}}をオンにしますか？",confirmPlugOff:"{{name}}をオフにしますか？",turnOn:"オン",turnOff:"オフ"}},bugReport:{title:"バグを報告",description:"説明",descriptionPlaceholder:"何が問題でしたか？問題を説明してください...",email:"メールアドレス（任意）",emailPlaceholder:"your@email.com",emailPrivacy:"入力された場合、メールアドレスはGitHub Issueの折りたたみセクションに含まれ、メンテナーがフォローアップできるようになります。",screenshot:"スクリーンショット",uploadOrPaste:"画像をアップロード、貼り付け、またはドラッグ",dataCollectedSummary:"レポートに含まれるデータは？",dataIncluded:"含まれるもの:",dataIncludedList:"アプリバージョン、OS、アーキテクチャ、Pythonバージョン、データベース統計（件数のみ）、プリンターモデル、ノズル数、ファームウェアバージョン、接続状態、統合状態（Spoolman、MQTT、HA）、非機密設定、ネットワークインターフェース数、Docker詳細、依存関係バージョン。",dataNeverIncluded:"含まれないもの:",dataNeverIncludedList:"プリンター名、シリアル番号、アクセスコード、パスワード、IPアドレス、メールアドレス、APIキー、トークン、Webhook URL、ホスト名、ユーザー名。",submit:"送信",startLogging:"デバッグログ開始",stepEnableLogging:"デバッグログ有効",stepReproduce:"問題を再現してください",stepStopLogging:"停止してレポート送信",stopAndSubmit:"停止して送信",maxDuration:"{{minutes}}分後に自動停止",stoppingLogs:"ログ収集・送信中...",submitting:"バグレポートを送信中...",submitSuccess:"バグレポートが正常に送信されました！",submitFailed:"バグレポートの送信に失敗しました",thankYou:"ありがとうございます！",submitted:"バグレポートが送信されました。",viewIssue:"Issueを表示",unexpectedError:"予期しないエラーが発生しました"},failureDetection:{title:"AI 失敗検出",description:"セルフホストされた Obico ML API で印刷を監視し、検出された失敗に自動的に対応します。",mlUrl:"Obico ML API の URL",mlUrlHint:"セルフホストした Obico ml_api コンテナのベース URL (例: http://192.168.1.10:3333)。",test:"テスト",testSuccess:"ML API に接続でき、正常です。",testFailed:"ML API に接続できませんでした。",sensitivity:"感度",sensitivityLow:"低(誤検出が少ない)",sensitivityMedium:"中(バランス型)",sensitivityHigh:"高(早期検出、誤検出が増加)",sensitivityHint:"警告と失敗をトリガーする信頼度のしきい値を調整します。",action:"失敗検出時の動作",actionNotify:"通知のみ",actionPause:"印刷を一時停止",actionPauseOff:"一時停止して電源を切る",pollInterval:"ポーリング間隔(秒)",pollIntervalHint:"印刷中に各プリンターをチェックする頻度。最小 5 秒、最大 120 秒。",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"監視対象プリンター",perPrinterHint:"検出サービスが監視するプリンターを選択します。",monitorAll:"接続されているすべてのプリンターを監視",statusTitle:"ステータス",serviceRunning:"サービス稼働中",thresholds:"低 / 高しきい値",activePrinters:"アクティブな印刷",noActivePrints:"現在、実行中の印刷はありません。",historyTitle:"最近の検出",noHistory:"まだ検出はありません。"},makerworld:{title:"MakerWorld",description:"MakerWorld モデルの URL を貼り付けると、Bambu Handy アプリを開かなくても Bambuddy から直接インポート・印刷できます。",pasteUrlHeader:"MakerWorld からインポート",pasteUrlPlaceholder:"https://makerworld.com/en/models/… または任意の MakerWorld リンク",resolveButton:"読み込む",signInRequiredTitle:"ダウンロードには Bambu Cloud へのサインインが必要です",signInRequiredBody:"モデルの詳細は匿名で閲覧できますが、3MF ファイルをダウンロードするには Bambu Cloud アカウントが必要です。",openCloudSettings:"Cloud 設定を開く",untitledModel:"無題のモデル",byCreator:"作成者: {{name}}",downloadsCount:"ダウンロード数: {{count}}",licensePrefix:"ライセンス",alreadyImported:"ライブラリに登録済み",openOnMakerworld:"MakerWorld で開く",alreadyInLibrary:"このモデルはすでにライブラリにあります — ファイルマネージャー → MakerWorld で確認できます",importSuccess:"{{filename}} をインポートしました — ファイルマネージャー → MakerWorld に保存済み",platesHeader:"プレート ({{count}})",plateDefaultName:"プレート {{n}}",materialCount:"フィラメント {{count}} 本",amsRequired:"AMS が必要",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"保存",sliceIn:"保存して {{slicer}} でスライス",disclaimer:"MakerWorld 連携はコミュニティで文書化された API エンドポイントを使用しています。Bambuddy は MakerWorld または Bambu Lab との提携・承認関係はありません。",lastImportSuccess:"ライブラリにインポートしました",lastImportAlreadyInLibrary:"既にライブラリに存在します",viewInLibrary:"ファイルマネージャーで表示",openInBambuStudio:"Bambu Studio で開く",openInOrcaSlicer:"OrcaSlicer で開く",importTo:"ファイルマネージャーへのインポート先",recentImportsHeader:"最近のインポート",phaseResolving:"解決中",phaseDownloading:"ダウンロード中",folderAuto:"MakerWorld (デフォルト)",importAll:"すべてインポート",importAllProgress:"インポート中 {{current}}/{{total}}",openGallery:"画像ギャラリーを開く",galleryPrev:"前の画像",galleryNext:"次の画像",deleteImport:"ライブラリから削除",importDeleting:"削除中…",importDeleted:"ライブラリから削除しました",confirmDelete:"{{filename}} をライブラリから削除しますか？ローカルファイルは削除されますが、MakerWorld から再インポートできます。",errors:{resolveFailed:"この MakerWorld URL を解決できませんでした。",downloadFailed:"ダウンロードに失敗しました。もう一度お試しください。",deleteFailed:"ライブラリからファイルを削除できませんでした。"}},libraryTrash:{title:"ゴミ箱",headerButton:"ゴミ箱",headerTooltip:"ゴミ箱に移動したファイルを表示",backToFiles:"ファイルマネージャーに戻る",subtitleAdmin:"削除されたファイルは {{days}} 日間ゴミ箱に残り、その後自動的に削除されます。このビューには全ユーザーのゴミ箱が表示されます。",subtitleUser:"削除されたファイルは {{days}} 日間ゴミ箱に残り、その後自動的に削除されます。",loading:"ゴミ箱を読み込み中…",loadError:"ゴミ箱を読み込めませんでした。",empty:"ゴミ箱は空です。",summary:"{{count}} 件 · {{size}}",emptyTrash:"ゴミ箱を空にする",restore:"復元",purgeNow:"今すぐ削除",autoPurgeIn:"{{when}} に自動削除",days:"日",retentionLabel:"自動削除までの期間",selectAll:"すべて選択",selectOne:"{{filename}} を選択",selectionCount:"{{count}} 件選択中",bulkRestore:"選択したものを復元",bulkPurge:"選択したものを削除",col:{filename:"ファイル",folder:"フォルダ",size:"サイズ",deleted:"ゴミ箱に移動",autoPurge:"自動削除",owner:"所有者",actions:"操作"},confirm:{purgeTitle:"完全に削除しますか？",purgeBody:"{{filename}} はディスクから削除され、復元できません。",emptyTitle:"ゴミ箱を空にしますか？",emptyBody:"{{count}} 件のファイルすべてがディスクから削除されます。この操作は取り消せません。",bulkPurgeTitle:"選択したファイルを完全に削除しますか？",bulkPurgeBody:"選択した {{count}} 件のファイルがディスクから削除され、復元できません。",cta:"完全に削除"},toast:{restored:"ファイルを復元しました。",restoreFailed:"ファイルを復元できませんでした。",purged:"ファイルを完全に削除しました。",purgeFailed:"ファイルを削除できませんでした。",emptied:"ゴミ箱から {{count}} 件のファイルを削除しました。",emptyFailed:"ゴミ箱を空にできませんでした。",retentionSaved:"自動削除を {{days}} 日に設定しました。",retentionFailed:"保持期間の設定を保存できませんでした。",bulkRestored:"{{count}} 件のファイルを復元しました。",bulkPurged:"{{count}} 件のファイルを削除しました。"}},libraryPurge:{title:"古いファイルを一括削除",headerButton:"古いファイル削除",headerTooltip:"古いファイルをまとめてゴミ箱に移動",description:"指定した期間より古いファイルはゴミ箱に移動されます。外部フォルダはスキップされます。自動削除までの間、ゴミ箱から復元できます。",ageLabel:"次より古いファイルを移動",days:"日",includeNeverPrinted:"一度も印刷していないファイルも含める",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"対象ファイル数を確認中…",previewFailed:"プレビューを取得できませんでした。",previewSummary:"{{count}} 件 · {{size}} がゴミ箱に移動されます",andMore:"…ほか {{count}} 件",warning:"ファイルはソフト削除されます — 保持期間が終了するまでゴミ箱から復元できます。",confirmCta:"{{count}} 件をゴミ箱へ移動",purging:"ゴミ箱へ移動中…",toast:{success:"{{count}} 件のファイルをゴミ箱に移動しました。",failed:"ファイルを削除できませんでした。"}},libraryAutoPurge:{enableLabel:"古いファイルを自動で一括削除",enableDescription:"管理者の一括削除を 1 日 1 回実行します。ファイルはまずゴミ箱に移動され、すぐには削除されません。",ageLabel:"次より古いファイルを自動削除",ageDescription:"最短 7 日、最長 10 年。手動の「古いファイル削除」ボタンと同じ期間ルールを使用します。",days:"日",includeNeverPrinted:"一度も印刷していないファイルも含める",saveFailed:"自動削除の設定を保存できませんでした。"},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},_me={nav:{printers:"Stampanti",archives:"Archivi",queue:"Coda",stats:"Statistiche",profiles:"Profili",maintenance:"Manutenzione",projects:"Progetti",inventory:"Filamento",files:"File",makerworld:"MakerWorld",notifications:"Notifiche",settings:"Impostazioni",system:"Sistema",collapseSidebar:"Comprimi barra laterale",expandSidebar:"Espandi barra laterale",update:"Aggiorna",updateAvailable:"Aggiornamento disponibile: v{{version}}",updateAvailableBanner:"Versione {{version}} disponibile!",viewUpdate:"Vedi aggiornamento",viewOnGithub:"Vedi su GitHub",keyboardShortcuts:"Scorciatoie da tastiera (?)",switchToLight:"Passa a tema chiaro",switchToDark:"Passa a tema scuro",smartSwitches:"Interruttori Smart",logout:"Esci"},common:{save:"Salva",saving:"Salvataggio...",cancel:"Annulla",delete:"Elimina",edit:"Modifica",add:"Aggiungi",close:"Chiudi",confirm:"Conferma",loading:"Caricamento...",error:"Errore",success:"Successo",warning:"Avviso",enabled:"Abilitato",disabled:"Disabilitato",yes:"Si",no:"No",on:"On",off:"Off",all:"Tutti",none:"Nessuno",search:"Cerca",filter:"Filtro",sort:"Ordina",refresh:"Aggiorna",download:"Scarica",upload:"Carica",uploading:"Caricamento...",uploadFailed:"Caricamento fallito",actions:"Azioni",status:"Stato",name:"Nome",description:"Descrizione",date:"Data",time:"Ora",hours:"ore",minutes:"minuti",seconds:"secondi",days:"giorni",enable:"Abilita",disable:"Disabilita",permissions:"Permessi",noPrinters:"Nessuna stampante configurata",noData:"Nessun dato disponibile",linkNotFound:"Link non trovato",required:"Obbligatorio",optional:"Opzionale",dismiss:"Chiudi",apply:"Applica",reset:"Reimposta",export:"Esporta",import:"Importa",clear:"Pulisci",selectAll:"Seleziona tutto",deselectAll:"Deseleziona tutto",noChange:"— Nessun cambio —",unchanged:"Invariato",unassigned:"Non assegnato",unknown:"Sconosciuto",unknownError:"Errore sconosciuto",today:"Oggi",tomorrow:"Domani",asap:"ASAP",overdue:"Scaduto",now:"Ora",collapse:"Comprimi",expand:"Espandi",viewArchive:"Vedi archivio",viewInFileManager:"Vedi nel Gestore file",addedBy:"Aggiunto da {{username}}",prints:"stampe",more:"+{{count}} altre",ascending:"Crescente",descending:"Decrescente",back:"Indietro",copy:"Copia",copied:"Copiato!",printer:"Stampante",remove:"Rimuovi",type:"Tipo",print:"Stampa",rename:"Rinomina",move:"Sposta",create:"Crea",duplicate:"Duplica",left:"Sinistra",right:"Destra"},printers:{title:"Stampanti",addPrinter:"Aggiungi Stampante",editPrinter:"Modifica Stampante",deletePrinter:"Elimina Stampante",printerName:"Nome Stampante",serialNumber:"Numero Seriale",ipAddress:"Indirizzo IP",accessCode:"Codice di Accesso",model:"Modello",nozzleCount:"Numero Ugelli",autoArchive:"Auto Archiviazione",status:{available:"Disponibile",idle:"Inattiva",printing:"In stampa",paused:"In pausa",offline:"Offline",problem:"Problema",error:"Errore",finished:"Finita",unknown:"Sconosciuto"},temperatures:{nozzle:"Ugello",bed:"Piatto",chamber:"Camera"},progress:"{{percent}}% completato",timeRemaining:"{{time}} rimanente",deleteConfirm:'Sei sicuro di eliminare "{{name}}"?',maintenanceOk:"Manutenzione OK",maintenanceWarning:"{{count}} avviso",maintenanceWarning_plural:"{{count}} avvisi",maintenanceDue:"{{count}} in scadenza",maintenanceDue_plural:"{{count}} in scadenza",sort:{name:"Nome",status:"Stato",model:"Modello",location:"Posizione",ascending:"Ordina crescente",descending:"Ordina decrescente"},cardSize:{small:"Schede piccole",medium:"Schede medie",large:"Schede grandi",extraLarge:"Schede extra grandi"},hideOffline:"Nascondi offline",nextAvailable:"Prossima disponibile",powerOn:"Accendi",offlinePrintersWithPlugs:"Stampanti offline con smart plug",noPrintersConfigured:"Nessuna stampante configurata",search:"Cerca stampanti...",noSearchResults:"Nessuna stampante corrisponde alla tua ricerca o ai tuoi filtri",filter:{allStatuses:"Tutti gli stati",allLocations:"Tutti i luoghi"},readyToPrint:"Pronta a stampare",external:"Esterna",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Elimina archivi stampa",noLabel:"Nessuna etichetta",printPreview:"Anteprima stampa",width:"Larghezza",height:"Altezza",noObjectsFound:"Nessun oggetto trovato",objectsLoadedOnPrintStart:"Gli oggetti sono caricati quando inizia una stampa",willBeSkipped:"Verra saltato",name:"Nome",serialCannotBeChanged:"Il numero seriale non può essere cambiato",locationHelp:"Usato per raggruppare stampanti e filtrare i lavori in coda",wifiSignal:{veryWeak:"Molto debole",weak:"Debole",fair:"Discreto",good:"Buono",excellent:"Eccellente"},maintenanceUpToDate:"Tutta la manutenzione aggiornata - Clicca per vedere",chamberLightOn:"Accendi luce camera",chamberLightOff:"Spegni luce camera",files:"File",browseFiles:"Sfoglia file stampante",autoOffAfterPrint:"Spegnimento automatico dopo stampa",autoOffExecuted:"Spegnimento automatico eseguito - accendi la stampante per reimpostare",hmsErrors:"Errori HMS",viewHmsErrors:"Vedi {{count}} errore(i) HMS",resume:"Riprendi",pause:"Pausa",stop:"Ferma",camera:"Camera",skipObject:"Salta Oggetto",reconnect:"Riconnetti",forceRefresh:"Forza aggiornamento",forceRefreshSuccess:"Aggiornamento richiesto",mqttDebug:"Debug MQTT",printerInformation:"Informazioni stampante",copyToClipboard:"Copia",copied:"Copiato!",state:"Stato",wifiSignalLabel:"Segnale WiFi",developerMode:"Modalità sviluppatore",enabled:"Attivato",disabled:"Disattivato",addedOn:"Aggiunta il",sdCard:"Scheda SD",inserted:"Inserita",notInserted:"Non inserita",totalPrintHours:"Ore di stampa",activeNozzle:"Attivo: ugello {{nozzle}}",nozzleRack:"Rack Ugelli",nozzleDocked:"Agganciato",nozzleMounted:"Montato",nozzleActive:"Attivo",nozzleIdle:"Inattivo",nozzleDiameter:"Diametro",nozzleType:"Tipo",nozzleStatus:"Stato",nozzleFilament:"Filamento",nozzleWear:"Usura",nozzleMaxTemp:"Temp Max",nozzleSerial:"Seriale",nozzleHardenedSteel:"Acciaio Temprato",nozzleStainlessSteel:"Acciaio Inox",nozzleTungstenCarbide:"Carburo di Tungsteno",nozzleFlow:"Flusso",nozzleHighFlow:"Alto Flusso",nozzleStandardFlow:"Standard",firmwareUpdate:"Aggiornamento Firmware",firmwareInstructions:"Sul touchscreen della stampante, vai a",firmwareNav:"Vai a",settings:"Impostazioni",firmware:"Firmware",discoverPrinters:"Trova Stampanti",searching:"Ricerca...",manualEntry:"Inserimento manuale",addFromCloud:"Aggiungi da Cloud",toast:{printerDeleted:"Stampante eliminata",missingSpoolAssignment:"Stampa avviata su {{printer}}. Mancano assegnazioni bobina per: {{slots}}",printerAdded:"Stampante aggiunta",printerUpdated:"Stampante aggiornata",failedToDelete:"Impossibile eliminare stampante",failedToAdd:"Impossibile aggiungere stampante",failedToUpdate:"Impossibile aggiornare stampante",commandSent:"Comando inviato",failedToSendCommand:"Impossibile inviare comando",turnedOn:"{{name}} accesa",failedToPowerOn:"Impossibile accendere {{name}}",scriptTriggered:"Script avviato",printStopped:"Stampa fermata",printPaused:"Stampa in pausa",printResumed:"Stampa ripresa",referenceDeleted:"Riferimento eliminato",detectionAreaSaved:"Area rilevamento salvata",failedToRunScript:"Impossibile eseguire script",failedToStopPrint:"Impossibile fermare stampa",failedToPausePrint:"Impossibile mettere in pausa stampa",failedToResumePrint:"Impossibile riprendere stampa",failedToControlChamberLight:"Impossibile controllare luce camera",failedToSetSpeed:"Impossibile impostare la velocità di stampa",failedToUpdateSetting:"Impossibile aggiornare impostazione",failedToSkipObjects:"Impossibile saltare oggetti",failedToRereadRfid:"Impossibile rileggere RFID",failedToCheckPlate:"Impossibile controllare piatto",failedToUpdateLabel:"Impossibile aggiornare etichetta",failedToDeleteReference:"Impossibile eliminare riferimento",failedToSaveDetectionArea:"Impossibile salvare area rilevamento",plateCheckEnabled:"Controllo piatto abilitato",plateCheckDisabled:"Controllo piatto disabilitato",calibrationSaved:"Calibrazione salvata!",calibrationFailed:"Calibrazione non riuscita",rfidRereadInitiated:"Rilettura RFID avviata"},connection:{connected:"Connesso",offline:"Offline"},plateStatus:{markCleared:"Segna il piatto come liberato",cleared:"Piatto libero",notCleared:"Piatto non libero",inUse:"Piatto in uso"},queue:{inQueue:"{{count}} stampa in coda",inQueue_plural:"{{count}} stampe in coda"},controls:"Controlli",rfid:{reread:"Rileggi RFID"},bedJog:{title:"Muovi il piano di stampa",bed:"Piano",step:"Passo (mm)",up:"Sposta piano su",down:"Sposta piano giù",disabledWhilePrinting:"Disabilitato durante la stampa",notHomedTitle:"Stampante non azzerata",notHomedMessage:"La stampante non è stata azzerata dall'ultima stampa. Esegui prima l'azzeramento automatico per un posizionamento sicuro (parcheggia la testa di stampa, poi azzera X, Y e Z), oppure muovi comunque — i finecorsa software verranno ignorati.",homeZ:"Azzeramento automatico",moveAnyway:"Muovi comunque",homingStarted:"Azzeramento automatico in corso…"},permission:{noAdd:"Non hai il permesso di aggiungere stampanti",noEdit:"Non hai il permesso di modificare stampanti",noDelete:"Non hai il permesso di eliminare stampanti",noControl:"Non hai il permesso di controllare stampanti",noFiles:"Non hai il permesso di accedere ai file stampante",noAmsRfid:"Non hai il permesso di rileggere AMS RFID",noSmartPlugControl:"Non hai il permesso di controllare smart plug",noCamera:"Non hai il permesso di visualizzare le telecamere"},modal:{addTitle:"Aggiungi Stampante",editTitle:"Modifica Stampante",myPrinter:"La mia Stampante",selectModel:"Seleziona modello...",locationGroup:"Posizione / Gruppo (opzionale)",locationPlaceholder:"es. Officina, Ufficio, Cantina",autoArchiveLabel:"Archivia automaticamente stampe completate",fromPrinterSettings:"Dalle impostazioni della stampante",modelOptional:"Modello (opzionale)",saveChanges:"Salva modifiche"},skipObjects:{tooltip:"Salta oggetti",onlyWhilePrinting:"Salta oggetti (solo durante la stampa)",requiresMultiple:"Salta oggetti (richiede 2+ oggetti)",title:"Salta Oggetti",matchIdsInfo:"Abbina gli ID con il display della stampante",printerShowsIds:"Lo schermo mostra gli ID oggetto sul piatto",skipSelected:"Salta selezionati",skipping:"Saltando...",noObjectsSelected:"Nessun oggetto selezionato",selectObjectsToSkip:"Seleziona gli oggetti da saltare nella stampa corrente",skipped:"saltato",objectsSkipped:"Oggetti saltati",activeCount:"{{count}} attivi",waitForLayer:"Attendi il layer 2+ per saltare oggetti (attualmente layer {{layer}})",skip:"Salta",confirmTitle:"Saltare oggetto?",confirmMessage:'Sei sicuro di voler saltare "{{name}}"? Questa azione non può essere annullata.'},confirm:{deleteTitle:"Elimina Stampante",deleteMessage:'Sei sicuro di eliminare "{{name}}"? Questo rimuoverà tutte le impostazioni di connessione.',deleteArchivesNote:"Tutta la cronologia di stampa sarà eliminata definitivamente.",keepArchivesNote:"La cronologia sarà mantenuta ma non più associata a questa stampante.",stopTitle:"Ferma Stampa",stopMessage:'Sei sicuro di fermare la stampa corrente su "{{name}}"? Questo annullerà il lavoro di stampa.',stopButton:"Ferma Stampa",pauseTitle:"Pausa Stampa",pauseMessage:'Sei sicuro di mettere in pausa la stampa corrente su "{{name}}"?',pauseButton:"Pausa Stampa",resumeTitle:"Riprendi Stampa",resumeMessage:'Sei sicuro di riprendere la stampa su "{{name}}"?',resumeButton:"Riprendi Stampa",powerOnTitle:"Accendi Stampante",powerOnMessage:'Sei sicuro di accendere "{{name}}"?',powerOnButton:"Accendi",powerOffTitle:"Spegni Stampante",powerOffMessage:'Sei sicuro di spegnere "{{name}}"?',powerOffWarning:'AVVISO: "{{name}}" sta stampando! Sei sicuro di spegnere? Questo interromperà la stampa e potrebbe danneggiare la stampante.',powerOffButton:"Spegni"},bulk:{select:"Seleziona",selectAll:"Seleziona tutto",selectByLocation:"Seleziona per posizione",selected:"{{count}} selezionato/i",actions:{stop:"Ferma",pause:"Pausa",resume:"Riprendi",clearPlate:"Svuota piano",clearHMS:"Cancella notifiche"},confirm:{stopTitle:"Ferma {{count}} stampe",stopMessage:"Questo annullerà le stampe attive su {{count}} stampante/i. Questa azione non può essere annullata.",stopButton:"Ferma tutte",pauseTitle:"Pausa {{count}} stampe",pauseMessage:"Questo metterà in pausa le stampe attive su {{count}} stampante/i.",pauseButton:"Pausa tutte",clearPlateTitle:"Svuota {{count}} piani di stampa",clearPlateMessage:"Questo svuoterà il piano di stampa su {{count}} stampante/i e potrebbe avviare i lavori in coda.",clearPlateButton:"Svuota tutti"},success:"{{action}} completato su {{count}} stampante/i",partial:"{{succeeded}} riuscito/i, {{failed}} fallito/i",noneApplicable:"Nessuna stampante selezionata è nello stato corretto per questa azione",selectByState:"Seleziona per stato"},discovery:{title:"Trova Stampanti",searching:"Ricerca...",scanning:"Scansione...",scanProgress:"Scansione... {{scanned}}/{{total}}",foundPrinters:"Trovate {{count}} stampante(i)",noPrintersFound:"Nessuna stampante trovata",noPrintersFoundSubnet:"Nessuna stampante trovata nella sottorete specificata.",noPrintersFoundNetwork:"Nessuna stampante trovata sulla rete.",allConfigured:"Tutte le stampanti trovate sono già configurate.",alreadyAdded:"Già aggiunta",select:"Seleziona",manualEntry:"Inserimento manuale",addFromCloud:"Aggiungi da Cloud",subnetToScan:"Sottorete da scansionare",dockerNote:"Docker rilevato. Inserisci la sottorete della stampante in notazione CIDR. Richiede network_mode: host in docker-compose.yml.",scanSubnet:"Scansiona sottorete per stampanti",discoverNetwork:"Trova stampanti in rete",scanningSubnet:"Scansione sottorete per stampanti Bambu...",scanningNetwork:"Scansione rete...",serialRequired:"Seriale richiesto",unknown:"Sconosciuto",failedToStart:"Avvio ricerca non riuscito"},drying:{start:"Avvia essiccazione",stop:"Ferma essiccazione",temperature:"Temperatura",duration:"Durata",hours:"ore",timeRemaining:"{{time}} rimanente",active:"Essiccazione",notSupported:"Essiccazione non supportata",powerRequired:"Collegare l'alimentatore AMS per abilitare l'asciugatura",startingDrying:"Avvio essiccazione...",stoppingDrying:"Arresto essiccazione...",rotateTray:"Ruota la bobina durante l'essiccazione"},filaments:"Filamenti",openCameraOverlay:"Apri overlay camera",openCameraWindow:"Apri camera in nuova finestra",firmwareUpdateAvailable:"Aggiornamento firmware disponibile: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Aggiornato",firmwareUpdateButton:"Aggiorna",plateDetection:{noPermission:"Non hai il permesso di aggiornare le stampanti",enabledClick:"Controllo piatto abilitato - Clicca per disabilitare",disabledClick:"Controllo piatto disabilitato - Clicca per abilitare",manageCalibration:"Gestisci calibrazione rilevamento piatto",calibrationRequired:"Calibrazione richiesta",calibrationInstructions:"Assicurati che il piatto sia <strong>completamente vuoto</strong>, poi clicca Calibra.",calibrationDescription:"La calibrazione salva un'immagine di riferimento del piatto vuoto. I controlli futuri confronteranno con questo riferimento per rilevare oggetti.",calibrationTip:"<strong>Suggerimento:</strong> Puoi salvare fino a 5 calibrazioni per piatti diversi. Il sistema usa automaticamente la migliore corrispondenza durante il controllo.",plateEmpty:"Il piatto sembra vuoto",objectsDetected:"Oggetti rilevati sul piatto",confidence:"Confidenza",difference:"Differenza",analysisPreview:"Anteprima analisi:",analysisLegend:"Riquadro verde = area rilevamento, overlay rosso = differenze dalla calibrazione",savedReferences:"Riferimenti salvati ({{count}}/{{max}})",deleteReference:"Elimina riferimento",labelPlaceholder:"Etichetta...",clickToEdit:"{{label}} - Clicca per modificare",clickToAddLabel:"Clicca per aggiungere etichetta"},speed:{title:"Velocità di stampa",silent:"Silenzioso (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Modalità condotto d'aria",cooling:"Raffreddamento",heating:"Riscaldamento"},noSdCard:"Nessuna SD",door:{open:"Aperta",closed:"Chiusa"},fans:{partCooling:"Ventola raffreddamento parte",auxiliary:"Ventola ausiliaria",chamber:"Ventola camera"},clickToViewHmsErrors:"Clicca per vedere errori HMS",estimatedCompletion:"Tempo completamento stimato",plateNumber:"Piastra {{number}}",slotOptions:"Opzioni slot",amsPopup:{friendlyName:"Nome AMS",friendlyNamePlaceholder:"es. Nome AMS amichevole",serialNumber:"Numero di serie",firmwareVersion:"Firmware",save:"Salva",clear:"Cancella",noEditPermission:"Non hai il permesso di rinominare le unità AMS"},firmwareModal:{title:"Aggiornamento Firmware",titleUpToDate:"Info Firmware",currentVersion:"Corrente:",latestVersion:"Ultima:",releaseNotes:"Note di rilascio",checkingPrereqs:"Controllo prerequisiti...",sdCardReady:"SD pronta. Clicca sotto per caricare firmware.",uploadedSuccess:"Firmware caricato su SD!",applyInstructions:"Per applicare l'aggiornamento sulla stampante:",step1:"Sul touchscreen della stampante, vai a <strong>Impostazioni</strong>",step2:"Vai a <strong>Firmware</strong>",step3:"Seleziona <strong>Aggiorna da SD</strong>",step4:"L'aggiornamento richiede 10-20 minuti",done:"Fatto",starting:"Avvio...",uploadFirmware:"Carica Firmware",uploadFailed:"Avvio caricamento fallito: {{error}}",uploadedToast:"Firmware caricato! Avvia aggiornamento dal display.",availableVersions:"Versioni disponibili",usable:"Utilizzabile",unavailable:"Non disponibile",installed:"Installato",newerBadge:"più recente",olderBadge:"più vecchio",currentBadge:"attuale"},accessCodePlaceholder:"Lascia vuoto per mantenere quello attuale",roi:{title:"Area di rilevamento (ROI)",xStart:"X Inizio",yStart:"Y Inizio",width:"Larghezza",height:"Altezza",instruction:"Regola l'area di rilevamento per focalizzare il piatto. Il riquadro verde mostra l'area corrente."},developerModeWarning:"La modalità sviluppatore LAN non è attivata su: {{names}}. Alcune funzionalità potrebbero non funzionare.",howToEnable:"Come attivare",incompatibleFile:"Questo file è stato preparato per {{slicedFor}}, ma questa stampante è una {{printerModel}}",dropNotPrintable:"Solo i file .gcode e .gcode.3mf possono essere stampati",dropToPrint:"Rilascia per stampare",cannotPrint:"Stampante occupata"},archives:{title:"Archivi di stampa",searchPlaceholder:"Cerca archivi...",filterByPrinter:"Filtra per stampante",filterByStatus:"Filtra per stato",sortBy:"Ordina per",sortNewest:"Più recenti",sortOldest:"Meno recenti",sortName:"Nome",sortDuration:"Durata",sortLargest:"Più grandi",sortSmallest:"Più piccoli",sortSize:"Dimensione",noArchives:"Nessun archivio trovato",noArchivesSearch:"Nessun archivio corrisponde alla ricerca",originalPrintNotVisible:"Stampa originale non visibile - prova a rimuovere i filtri",noArchivesYet:"Nessun archivio ancora",prints:"stampe",pagination:{showing:"Mostrando",to:"a",of:"di",show:"Mostra",page:"Pagina",all:"Tutti"},loadingArchives:"Caricamento archivi...",releaseToUpload:"Rilascia per caricare",showAll:"Mostra tutti",showFavoritesOnly:"Solo preferiti",gridView:"Vista griglia",listView:"Vista elenco",calendarView:"Vista calendario",logView:"Registro stampe",manageTags:"Gestisci tag",showFailedPrints:"Mostra stampe fallite",hideFailedPrints:"Nascondi stampe fallite",hideDuplicates:"Nascondi duplicati",viewOriginalPrint:"Fai clic per visualizzare la stampa originale (#{{id}})",printTime:"Tempo di stampa",filamentUsed:"Filamento usato",cost:"Costo",reprint:"Ristampa",preview:"Anteprima",deleteArchive:"Elimina archivio",deleteConfirm:"Sei sicuro di eliminare questo archivio?",favorite:"Preferito",unfavorite:"Rimuovi dai preferiti",viewDetails:"Vedi dettagli",status:{completed:"Completato",failed:"Fallito",stopped:"Fermato"},toast:{source3mfAttached:"Sorgente 3MF allegata: {{filename}}",failedUploadSource3mf:"Caricamento sorgente 3MF non riuscito",source3mfRemoved:"Sorgente 3MF rimossa",failedRemoveSource3mf:"Rimozione sorgente 3MF non riuscita",f3dAttached:"F3D allegato: {{filename}}",failedUploadF3d:"Caricamento F3D non riuscito",f3dRemoved:"F3D rimosso",failedRemoveF3d:"Rimozione F3D non riuscita",timelapseAttached:"Timelapse allegato: {{filename}}",timelapseAlreadyAttached:"Timelapse già allegato",noMatchingTimelapse:"Nessun timelapse corrispondente",failedScanTimelapse:"Scansione timelapse non riuscita",failedAttachTimelapse:"Allegato timelapse non riuscito",timelapseRemoved:"Timelapse rimosso",failedRemoveTimelapse:"Impossibile rimuovere il timelapse",timelapseUploaded:"Timelapse caricato: {{filename}}",failedUploadTimelapse:"Impossibile caricare il timelapse",archiveDeleted:"Archivio eliminato",failedDeleteArchive:"Eliminazione archivio non riuscita",addedToFavorites:"Aggiunto ai preferiti",removedFromFavorites:"Rimosso dai preferiti",projectUpdated:"Progetto aggiornato",failedUpdateProject:"Aggiornamento progetto non riuscito",linkCopied:"Link copiato negli appunti",failedCopyLink:"Copia link non riuscita",photoDeleted:"Foto eliminata",failedDeletePhoto:"Eliminazione foto non riuscita",failedDeleteArchives:"Eliminazione archivi non riuscita",failedUpdateFavorites:"Aggiornamento preferiti non riuscito",exportDownloaded:"Export scaricato",exportFailed:"Export non riuscito"},menu:{print:"Stampa",schedule:"Programma",openInBambuStudio:"Apri nello slicer",slice:"Slice",externalLink:"Link esterno",viewOnMakerWorld:"Vedi su MakerWorld",preview3d:"Anteprima 3D",viewTimelapse:"Vedi Timelapse",scanForTimelapse:"Cerca Timelapse",uploadTimelapse:"Carica timelapse",removeTimelapse:"Rimuovi timelapse",downloadSource3mf:"Scarica Sorgente 3MF",uploadSource3mf:"Carica Sorgente 3MF",replaceSource3mf:"Sostituisci Sorgente 3MF",removeSource3mf:"Rimuovi Sorgente 3MF",uploadF3d:"Carica F3D",replaceF3d:"Sostituisci F3D",downloadF3d:"Scarica F3D",removeF3d:"Rimuovi F3D",download:"Scarica",copyDownloadLink:"Copia link download",qrCode:"QR Code",viewPhotos:"Vedi foto",viewPhotosCount:"Vedi foto ({{count}})",projectPage:"Pagina progetto",addToFavorites:"Aggiungi ai preferiti",removeFromFavorites:"Rimuovi dai preferiti",edit:"Modifica",goToProject:"Vai al progetto: {{name}}",addToProject:"Aggiungi al progetto",removeFromProject:"Rimuovi dal progetto",loading:"Caricamento...",noProjectsAvailable:"Nessun progetto disponibile",searchProjects:"Search projects…",select:"Seleziona",deselect:"Deseleziona",delete:"Elimina"},permission:{noReprint:"Non hai il permesso di ristampare questo archivio",noAddToQueue:"Non hai il permesso di aggiungere alla coda",noUpdateArchives:"Non hai il permesso di aggiornare archivi",noUploadFiles:"Non hai il permesso di caricare file",noDownload:"Non hai il permesso di scaricare archivi",noCopyLink:"Non hai il permesso di copiare link download",noDelete:"Non hai il permesso di eliminare questo archivio",noCreate:"Non hai il permesso di creare archivi"},platePicker:{title:"Seleziona la piastra da visualizzare",hint:"Questo archivio contiene più piastre. Scegline una da aprire nel visualizzatore GCode.",plateLabel:"Piastra {{index}}",objectCount:"{{count}} oggetto",objectCount_plural:"{{count}} oggetti",noGcode:"Questo archivio non contiene G-code generato da visualizzare. Aprilo prima in Bambu Studio per sezionarlo."},card:{previousPlate:"Piatto precedente",nextPlate:"Piatto successivo",plateNumber:"Piatto {{index}}",moreOptions:"Clic destro per altre opzioni",addToFavorites:"Aggiungi ai preferiti",removeFromFavorites:"Rimuovi dai preferiti",cancelled:"annullato",failed:"fallito",duplicate:"duplicato",duplicateTitle:"Questo modello è stato stampato prima",openSource3mf:"Apri sorgente 3MF in Bambu Studio (clic destro per altre opzioni)",downloadF3d:"Scarica file design Fusion 360",viewTimelapse:"Vedi timelapse",viewPhoto:"Vedi 1 foto",viewPhotos:"Vedi {{count}} foto",openFolder:"Apri cartella: {{name}}",slicedFile:"File slice - pronto a stampare",sourceFile:"Solo file sorgente - nessuna mappatura AMS disponibile",gcode:"GCODE",source:"SOURCE",project:"Progetto: {{name}}",estimated:"Stimato: {{time}}",actual:"Reale: {{time}}",accuracy:"Accuratezza: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} strato",layers:"{{count}} strati",object:"{{count}} oggetto",objects:"{{count}} oggetti",slicedFor:"Sliced per {{model}}",uploadedBy:"Caricato da",noPermissionReprint:"Non hai il permesso di ristampare",noFileForReprint:"Nessun file 3MF disponibile — il file non è stato scaricato dalla stampante durante la registrazione",noPermissionEdit:"Non hai il permesso di modificare archivi",noPermissionDelete:"Non hai il permesso di eliminare archivi",reprint:"Ristampa",schedulePrint:"Programma Stampa",schedule:"Programma",openInBambuStudio:"Apri nello slicer",openInBambuStudioToSlice:"Apri nello slicer per slicing",slice:"Slice",externalLink:"Link esterno",makerWorld:"MakerWorld: {{designer}}",viewProject:"Vedi progetto",noExternalLink:"Nessun link esterno",preview3d:"Anteprima 3D",download:"Scarica",edit:"Modifica",delete:"Elimina"},modal:{deleteArchive:"Elimina Archivio",deleteConfirm:'Sei sicuro di eliminare "{{name}}"? Questa azione non può essere annullata.',deleteButton:"Elimina",removeSource3mf:"Rimuovi Sorgente 3MF",removeSource3mfConfirm:'Sei sicuro di rimuovere il file sorgente 3MF da "{{name}}"? Questo eliminerà il progetto slicer originale.',removeButton:"Rimuovi",removeF3d:"Rimuovi F3D",removeF3dConfirm:'Sei sicuro di rimuovere il file Fusion 360 da "{{name}}"?',removeTimelapse:"Rimuovi timelapse",removeTimelapseConfirm:'Sei sicuro di voler rimuovere il video timelapse da "{{name}}"?',timelapse:"{{name}} - Timelapse",selectTimelapse:"Seleziona Timelapse",selectTimelapseDesc:"Nessun abbinamento automatico trovato. Seleziona il timelapse per questa stampa:",deleteArchives:"Elimina Archivi",deleteArchivesConfirm:"Sei sicuro di eliminare {{count}} archivio(i)? Questa azione non può essere annullata.",deleteCount:"Elimina {{count}}"},page:{title:"Archivi",printsCount:"{{filtered}} di {{total}} stampe",dropFilesHere:"Rilascia file .3mf qui",releaseToUpload:"Rilascia per caricare",only3mfSupported:"Solo file .3mf supportati",close:"Chiudi",selected:"{{count}} selezionati",selectAll:"Seleziona tutto",tags:"Tag",project:"Progetto",favorite:"Preferito",delete:"Elimina",toggledFavorites:"Preferiti aggiornati per {{count}} archivio(i)",failedUpdateFavorites:"Aggiornamento preferiti non riuscito",archivesDeleted:"{{count}} archivio(i) eliminati",failedDeleteArchives:"Eliminazione archivi non riuscita",photoDeleted:"Foto eliminata",failedDeletePhoto:"Eliminazione foto non riuscita"},list:{name:"Nome",printer:"Stampante",date:"Data",size:"Dimensione",actions:"Azioni",hasTimelapse:"Ha timelapse"},log:{date:"Data",printName:"Nome stampa",printer:"Stampante",user:"Utente",status:"Stato",duration:"Durata",filament:"Filamento",allPrinters:"Tutte le stampanti",allUsers:"Tutti gli utenti",allStatuses:"Tutti gli stati",cancelled:"Annullato",skipped:"Saltato",dateFrom:"Dal",dateTo:"Al",noEntries:"Nessuna voce di registro trovata",showing:"{{count}} di {{total}} voci",rowsPerPage:"Righe",page:"Pagina",prev:"Prec.",next:"Succ.",clearLog:"Cancella registro",clearLogTitle:"Cancella registro stampe",clearLogConfirm:"Tutte le voci del registro di stampa verranno eliminate permanentemente. Gli archivi e gli elementi della coda non sono interessati. Questa azione non può essere annullata. Sei sicuro?",clearLogButton:"Cancella tutto",cleared:"{{count}} voci di registro cancellate",clearFailed:"Impossibile cancellare il registro stampe"}},queue:{title:"Coda di stampa",subtitle:"Programma e gestisci i tuoi lavori di stampa",addToQueue:"Aggiungi alla coda",print:"Stampa",reprint:"Ristampa",schedulePrint:"Programma Stampa",editQueueItem:"Modifica elemento coda",printToPrinters:"Stampa su {{count}} Stampanti",queueToPrinters:"Metti in coda su {{count}} Stampanti",queueSelectedPlates:"Metti in coda {{count}} piastre",selectAllPlates:"Seleziona tutte le {{count}} piastre",deselectAll:"Deseleziona tutto",printQueued:"Stampa in coda",itemsQueued:"{{count}} elementi in coda",sending:"Invio...",sendingProgress:"Invio {{current}}/{{total}}...",adding:"Aggiunta...",addingProgress:"Aggiunta {{current}}/{{total}}...",savingProgress:"Salvataggio {{current}}/{{total}}...",clearQueue:"Svuota coda",clearHistory:"Svuota cronologia",emptyQueue:"La coda è vuota",position:"Posizione",scheduledTime:"Ora programmata",moveUp:"Sposta su",moveDown:"Sposta giù",startNow:"Avvia ora",printingInProgress:"Stampa in corso...",viewArchive:"Vedi archivio",viewInFileManager:"Vedi nel Gestore file",itemCount:"{{count}} elemento",itemCount_plural:"{{count}} elementi",dragToReorder:"Trascina per riordinare (solo ASAP)",reorderHint:"La posizione influisce solo sugli elementi ASAP. Quelli programmati partono all'orario.",sjf:{label:"SJF",tooltip:"Lavoro più breve prima — lo scheduler dà priorità alle stampe più brevi"},addedBy:"Aggiunto da {{name}}",nextInQueue:"Prossimo in coda",clearPlateSuccess:"Piatto liberato — pronto per la prossima stampa",plateNumber:"Piatto {{index}}",quantity:"Quantità",quantityHint:"Crea {{count}} elementi in coda",activeBatches:"Lotti attivi",batchProgress:"{{completed}} di {{total}} completati",cancelBatch:"Annulla rimanenti",batchCancelled:"Elementi rimanenti del lotto annullati",cancelBatchConfirmTitle:"Annulla lotto",cancelBatchConfirmMessage:"Annullare tutti gli elementi in sospeso rimanenti in questo lotto?",batch:"Lotto",sections:{currentlyPrinting:"In stampa",queued:"In coda",history:"Cronologia"},status:{pending:"In attesa",waiting:"In attesa",printing:"In stampa",paused:"In pausa",completed:"Completato",failed:"Fallito",skipped:"Saltato",cancelled:"Annullato"},summary:{printing:"In stampa",queued:"In coda",totalTime:"Tempo totale coda",totalWeight:"Peso totale della coda",history:"Cronologia"},filter:{allPrinters:"Tutte le stampanti",unassigned:"Non assegnato",allStatus:"Tutti gli stati",allLocations:"Tutte le posizioni",any:"Qualsiasi"},sort:{byPosition:"Ordina per posizione",byName:"Ordina per nome",byPrinter:"Ordina per stampante",bySchedule:"Ordina per programma",byDate:"Ordina per data",ascendingOldest:"Crescente (più vecchi)",descendingNewest:"Decrescente (più recenti)"},badges:{staged:"In staging",requiresPrevious:"Richiede successo precedente",autoPowerOff:"Spegnimento automatico",gcodeInjection:"G-code"},empty:{title:"Nessuna stampa programmata",description:`Programma una stampa dalla pagina Archivi usando l'opzione "Programma" nel menu contestuale, o trascina i file per iniziare.`},time:{asap:"ASAP",overdue:"Scaduto",now:"Ora",lessThanMinute:"Tra meno di un minuto",inMinutes:"Tra {{count}} min",inHours:"Tra {{count}} ore"},actions:{stopPrint:"Ferma Stampa",startPrint:"Avvia Stampa",requeue:"Rimetti in coda"},bulkEdit:{title:"Modifica {{count}} elemento",title_plural:"Modifica {{count}} elementi",description:"Solo le impostazioni modificate saranno applicate agli elementi selezionati.",printer:"Stampante",noChange:"— Nessun cambio —",queueOptions:"Opzioni coda",staged:"In staging (avvio manuale)",autoPowerOff:"Spegnimento automatico dopo stampa",requirePrevious:"Richiede successo precedente",printOptions:"Opzioni stampa",bedLevelling:"Livellamento piatto",flowCalibration:"Calibrazione flusso",vibrationCalibration:"Calibrazione vibrazioni",layerInspection:"Controllo primo layer",timelapse:"Timelapse",useAms:"Usa AMS",applyChanges:"Applica modifiche",selectAll:"Seleziona tutto",deselectAll:"Deseleziona tutto",selected:"{{count}} selezionati",editSelected:"Modifica selezionati",cancelSelected:"Annulla selezionati"},confirm:{cancelTitle:"Annulla stampa programmata",cancelMessage:'Sei sicuro di annullare "{{name}}"?',stopTitle:"Ferma Stampa",stopMessage:'Sei sicuro di fermare la stampa corrente "{{name}}"? Questo annullerà il lavoro sulla stampante.',removeTitle:"Rimuovi dalla cronologia",removeMessage:'Sei sicuro di rimuovere "{{name}}" dalla cronologia coda?',clearHistoryTitle:"Svuota cronologia",clearHistoryMessage:"Sei sicuro di rimuovere {{count}} elemento(i) dalla cronologia?",cancelButton:"Annulla Stampa",stopButton:"Ferma Stampa",thisPrint:"questa stampa",thisItem:"questo elemento"},toast:{cancelled:"Elemento coda annullato",cancelFailed:"Annullamento non riuscito",removed:"Elemento coda rimosso",removeFailed:"Rimozione non riuscita",stopped:"Stampa fermata",stopFailed:"Impossibile fermare stampa",released:"Stampa rilasciata in coda",startFailed:"Avvio stampa non riuscito",reorderFailed:"Riordino coda non riuscito",historyCleared:"Cancellati {{count}} elementi cronologia",clearHistoryFailed:"Svuotamento cronologia non riuscito",updateFailed:"Aggiornamento elementi non riuscito",bulkCancelled:"Annullati {{count}} elementi",bulkCancelFailed:"Annullamento elementi non riuscito"},timeline:{listView:"Lista",timelineView:"Cronologia",unassigned:"Non assegnato",noData:"Nessuna stampa programmata per questo giorno",allDoneBy:"Tutte le stampe completate entro le {{time}}",staged:"In attesa",filterAll:"Mostra tutto",filterPrinting:"In stampa",filterQueued:"In coda",time:{anyMoment:"a momenti",minutesLeft:"{{minutes}}m rimanenti",hoursLeft:"{{hours}}h rimanenti",hoursMinutesLeft:"{{hours}}h {{minutes}}m rimanenti"},day:{previous:"Giorno precedente",next:"Giorno successivo",today:"Oggi"}},permissions:{noStopPrint:"Non hai il permesso di fermare stampe",noStartPrint:"Non hai il permesso di avviare stampe",noEdit:"Non hai il permesso di modificare questo elemento coda",noCancel:"Non hai il permesso di annullare questo elemento coda",noRequeue:"Non hai il permesso di rimettere in coda elementi",noRemove:"Non hai il permesso di rimuovere questo elemento coda",noClearHistory:"Non hai il permesso di svuotare tutta la cronologia",noEditItems:"Non hai il permesso di modificare elementi coda",noCancelItems:"Non hai il permesso di annullare elementi coda"}},backgroundDispatch:{unknownFile:"File sconosciuto",unknownPrinter:"Stampante sconosciuta",startingPrints:"Avvio stampe",progressSummary:"{{complete}}/{{total}} completati • Inviati: {{dispatched}} • In elaborazione: {{processing}}",expandDetails:"Espandi dettagli dispatch",collapseDetails:"Comprimi dettagli dispatch",dismissToast:"Chiudi notifica dispatch",cancelDispatchJob:"Annulla job dispatch",cancel:"Annulla",cancelling:"Annullamento…",awaitingPrinter:"In attesa della stampante…",status:{dispatched:"Inviato",processing:"In elaborazione",completed:"Completato",failed:"Fallito",cancelled:"Annullato"},toast:{cancellingUpload:"Annullamento upload...",cancelled:"Dispatch annullato",cancelFailed:"Impossibile annullare il dispatch",completeWithFailures:"Dispatch in background completato: {{completed}} riusciti, {{failed}} falliti",completeSuccess:"Dispatch in background completato: {{completed}} riusciti",printStartedRemaining:"{{completed}} stampa/e avviata/e, {{remaining}} in invio..."}},stats:{title:"Dashboard",subtitle:"Trascina i widget per riordinare. Clicca l'icona occhio per nascondere.",overview:"Panoramica",totalPrints:"Stampe totali",successRate:"Tasso di successo",totalPrintTime:"Tempo totale di stampa",printTime:"Tempo di stampa",totalFilament:"Filamento totale usato",filamentUsed:"Filamento usato",filamentCost:"Costo filamento",totalCost:"Costo totale",energyUsed:"Energia usata",energyCost:"Costo energia",energyWarmingUpTooltip:"Il tracciamento energia sta ancora raccogliendo snapshot orari. I totali per intervallo diventeranno accurati quando esisterà almeno uno snapshot prima dell’intervallo selezionato. I primi valori potrebbero essere sottostimati.",averagePrintTime:"Tempo medio di stampa",printsPerDay:"Stampe al giorno",byPrinter:"Per stampante",printsByPrinter:"Stampe per stampante",byMaterial:"Per materiale",byMonth:"Per mese",last7Days:"Ultimi 7 giorni",last30Days:"Ultimi 30 giorni",last90Days:"Ultimi 90 giorni",allTime:"Sempre",quickStats:"Statistiche rapide",printActivity:"Attivita di stampa",filamentTypes:"Tipi di filamento",filamentTrends:"Trend filamento",failureAnalysis:"Analisi guasti",timeAccuracy:"Accuratezza tempo",successful:"Riuscite:",failed:"Fallite:",perfectEstimate:"100% = stima perfetta",noTimeAccuracyData:"Nessun dato accuratezza tempo",noFilamentData:"Nessun dato filamento",noPrinterData:"Nessun dato stampante",noPrintData:"Nessun dato stampa",noPrintDataLast30Days:"Nessun dato stampa negli ultimi 30 giorni",failureReasons:"Cause guasto",topFailureReasons:"Cause principali",failedPrintsCount:"{{failed}} / {{total}} stampe fallite",lastWeekRate:"Settimana scorsa: {{rate}}%",resetLayout:"Reimposta layout",recalculateCosts:"Ricalcola costi",recalculateCostsHint:"Ricalcola tutti i costi archivi usando i prezzi filamento correnti",exportStats:"Esporta statistiche",exportAsCsv:"Esporta come CSV",exportAsExcel:"Esporta come Excel",hiddenCount:"{{count}} Nascosti",exportDownloaded:"Export scaricato",exportFailed:"Export non riuscito",layoutReset:"Layout reimpostato",recalculatedCosts:"Costi ricalcolati per {{count}} archivi",recalculateFailed:"Ricalcolo costi non riuscito",loadingStats:"Caricamento statistiche...",noPermissionResetLayout:"Non hai il permesso di reimpostare il layout",noPermissionRecalculate:"Non hai il permesso di ricalcolare i costi",noPrintDataInRange:"Nessun dato nel periodo selezionato",periodFilament:"Filamento utilizzato",periodCost:"Costo",avgPerPrint:"Media per stampa",usageOverTime:"Utilizzo nel tempo",filamentByWeight:"Peso",printDuration:"Durata stampa",printerUtilization:"Utilizzo stampante",filamentSuccess:"Successo per materiale",printHabits:"Abitudini di stampa",printTimeOfDay:"Ora di stampa",colorDistribution:"Distribuzione colori",noColorData:"Nessun dato colore disponibile",records:"Record",longestPrint:"Stampa più lunga",heaviestPrint:"Stampa più pesante",mostExpensivePrint:"Più costosa",busiestDay:"Giorno più attivo",successStreak:"Serie di successi",streakPrint:"stampa consecutiva",streakPrints:"{{count}} stampe consecutive",printerStats:"Statistiche stampante",hours:"ore",avgPrints:"Media stampe",noArchiveData:"Nessun dato di stampa disponibile",filamentByTime:"Tempo",avgWeight:"Media peso",avgTime:"Media tempo",filamentByPrints:"Stampe",timeframe:{today:"Oggi","this-week":"Questa settimana","this-month":"Questo mese","last-7":"Ultimi 7 giorni","last-30":"Ultimi 30 giorni","last-90":"Ultimi 90 giorni","this-year":"Quest'anno","all-time":"Tutto",custom:"Personalizzato",from:"Da",to:"A"},allUsers:"Tutti gli utenti",noUser:"Nessun utente (Sistema)",filterByUser:"Filtra per utente"},maintenance:{title:"Manutenzione",overview:"Panoramica",allOk:"Tutta la manutenzione aggiornata",dueCount:"{{count}} elemento in scadenza",dueCount_plural:"{{count}} elementi in scadenza",warningCount:"{{count}} avviso",warningCount_plural:"{{count}} avvisi",totalPrintTime:"Tempo totale di stampa",nextMaintenance:"Prossima manutenzione",nothingDue:"Niente in scadenza",tasks:"Attivita",lastPerformed:"Ultima esecuzione",interval:"Intervallo",hoursRemaining:"{{hours}}h rimanenti",hoursOverdue:"{{hours}}h in ritardo",markDone:"Segna come fatto",performMaintenance:"Esegui manutenzione",history:"Cronologia",noHistory:"Nessuna cronologia manutenzione",editPrintHours:"Modifica ore stampa",currentHours:"Ore attuali",statusTab:"Stato",settingsTab:"Impostazioni",overdueCount:"{{count}} in ritardo",dueSoonCount:"{{count}} in scadenza",dueSoon:"In scadenza",allGood:"Tutto ok",overdueBy:"In ritardo di {{duration}}",dueIn:"Scade tra {{duration}}",timeLeft:"{{duration}} rimanenti",day:"1 giorno",days:"{{count}} giorni",week:"1 settimana",weeks:"{{count}} settimane",month:"1 mese",months:"{{count}} mesi",year:"1 anno",maintenanceTypes:"Tipi di manutenzione",maintenanceTypesDescription:"Tipi di sistema e tue attivita personalizzate",addCustomType:"Aggiungi tipo personalizzato",restoreDefaults:"Ripristina attivita predefinite",intervalType:"Tipo intervallo",intervalValue:"Intervallo ({{type}})",icon:"Icona",documentationLink:"Link documentazione (opzionale)",assignToPrinters:"Assegna alle stampanti",selectAtLeastOnePrinter:"Seleziona almeno una stampante",addType:"Aggiungi tipo",custom:"Personalizzato",printHours:"Ore di stampa",calendarDays:"Giorni calendario",exampleName:"es. Sostituisci filtro HEPA",viewDocumentation:"Vedi documentazione",timeBasedInterval:"Intervallo basato sul tempo",intervalOverrides:"Override intervallo",intervalOverridesDescription:"Personalizza intervalli per stampanti specifiche",assignedToPrinters:"Assegnato alle stampanti:",noPrintersAssigned:"Nessuna stampante assegnata",addPrinterShort:"Aggiungi:",printersAssignedClick:"{{count}} stampante(i) assegnata - clicca per gestire",removeFromPrinter:"Rimuovi da questa stampante",types:{lubricateCarbonRods:"Lubrifica aste in carbonio",lubricateRails:"Lubrifica guide lineari",cleanNozzle:"Pulisci ugello/Hotend",checkBelts:"Controlla tensione cinghie",cleanBuildPlate:"Pulisci piatto",checkExtruder:"Controlla ingranaggi estrusore",checkCooling:"Controlla ventole raffreddamento",generalInspection:"Ispezione generale",cleanCarbonRods:"Pulisci aste in carbonio",lubricateSteelRods:"Lubrifica aste in acciaio",cleanSteelRods:"Pulisci aste in acciaio",cleanLinearRails:"Pulisci guide lineari",checkPtfeTube:"Controlla tubo PTFE",replaceHepaFilter:"Sostituisci filtro HEPA",replaceCarbonFilter:"Sostituisci filtro carbone",lubricateLeftNozzleRail:"Lubrifica guida ugello sinistro"},maintenanceComplete:"Manutenzione segnata come completata",typeUpdated:"Tipo manutenzione aggiornato",typeDeleted:"Tipo manutenzione eliminato",defaultsRestored:"Ripristinate {{count}} attivita predefinite",printHoursUpdated:"Ore di stampa aggiornate",printerAssigned:"Stampante assegnata",printerRemoved:"Stampante rimossa",deleteTypeConfirm:'Eliminare "{{name}}"?',deleteSystemTypeTitle:"Eliminare attività di manutenzione predefinita?",deleteSystemTypeMessage:`Sei sicuro di voler eliminare l'attività di manutenzione predefinita "{{name}}"?`,noPermissionUpdate:"Non hai il permesso di aggiornare elementi manutenzione",noPermissionPerform:"Non hai il permesso di eseguire manutenzione",noPermissionEditTypes:"Non hai il permesso di modificare tipi manutenzione",noPermissionDeleteTypes:"Non hai il permesso di eliminare tipi manutenzione",noPermissionEditHours:"Non hai il permesso di modificare ore stampa",noPermissionRemovePrinter:"Non hai il permesso di rimuovere assegnazioni stampanti",noPermissionAssignPrinter:"Non hai il permesso di assegnare stampanti",noPermissionEditIntervals:"Non hai il permesso di modificare intervalli",configureSettings:"Configura tipi e intervalli manutenzione"},settings:{title:"Impostazioni",general:"Generale",tabs:{general:"Generale",smartPlugs:"Prese smart",notifications:"Notifiche",queue:"Workflow",filament:"Filamento",network:"Rete",apiKeys:"Chiavi API",virtualPrinter:"Stampante virtuale",failureDetection:"Rilevamento guasti",users:"Utenti",backup:"Backup",emailAuth:"Autenticazione Email",ldap:"LDAP",twoFa:"Autenticazione 2FA",oidc:"SSO / OIDC",spoolbuddy:"SpoolBuddy"},ldap:{title:"Autenticazione LDAP",enabledDesc:"L'autenticazione LDAP è attiva",disabledDesc:"L'autenticazione LDAP è disattivata",disabledHint:"Configura e salva le impostazioni LDAP qui sotto, poi attiva.",enabled:"Autenticazione LDAP attivata",disabled:"Autenticazione LDAP disattivata",feature1:"Gli utenti possono accedere con le credenziali LDAP",feature2:"L'account amministratore locale rimane come fallback",feature3:"I gruppi LDAP vengono mappati ai gruppi BamBuddy al login",serverConfig:"Configurazione server LDAP",serverUrl:"URL del server",serverUrlHint:"Usa ldap:// per standard o ldaps:// per connessioni SSL",security:"Sicurezza",securityHint:"StartTLS aggiorna una connessione semplice a TLS. LDAPS usa TLS fin dall'inizio.",bindDn:"Bind DN (account di servizio)",bindPassword:"Password Bind",searchBase:"Base DN di ricerca",userFilter:"Filtro di ricerca utente",userFilterHint:"{username} viene sostituito con il nome utente. Usa (uid={username}) per OpenLDAP.",autoProvision:"Provisioning automatico utenti",autoProvisionHint:"Crea automaticamente un account BamBuddy al primo accesso LDAP",defaultGroup:"Gruppo predefinito",defaultGroupNone:"— Nessuno (nessun fallback) —",defaultGroupHint:"Gruppo di fallback assegnato quando un utente LDAP si autentica ma non è presente in nessun gruppo LDAP mappato. Lascia vuoto per lasciare gli utenti non mappati senza autorizzazioni.",groupMapping:"Mappatura gruppi (JSON)",groupMappingHint:"Mappa i DN dei gruppi LDAP ai gruppi BamBuddy. Gruppi disponibili: ",testConnection:"Test connessione",settingsSaved:"Impostazioni LDAP salvate",errors:{serverRequired:"L'URL del server LDAP è obbligatorio",searchBaseRequired:"Il Base DN di ricerca è obbligatorio",enableAuthFirst:"Attiva prima l'autenticazione",configureLdapFirst:"Salva prima le impostazioni LDAP"}},email:{smtpSettings:"Configurazione SMTP",smtpHost:"Server SMTP",smtpPort:"Porta SMTP",security:"Sicurezza",authentication:"Autenticazione",username:"Nome utente",password:"Password",fromEmail:"Email mittente",fromName:"Nome mittente",testConnection:"Testa connessione SMTP",testRecipient:"Email destinatario test",sendTest:"Invia email di test",sending:"Invio...",save:"Salva impostazioni",saving:"Salvataggio...",advancedAuth:"Autenticazione avanzata",advancedAuthEnabled:"L'autenticazione avanzata è abilitata",advancedAuthEnabledDesc:"Le funzionalità di gestione utenti via email sono attive. I nuovi utenti riceveranno password generate automaticamente via email e potranno reimpostare la password tramite la funzione di recupero.",advancedAuthDisabled:"L'autenticazione avanzata è disabilitata",advancedAuthDisabledDesc:"Abilita l'autenticazione avanzata per attivare le funzionalità email per la gestione utenti.",enable:"Abilita",disable:"Disabilita",feature1:"Le password vengono generate automaticamente e inviate via email ai nuovi utenti",feature2:"Gli utenti possono accedere con nome utente o email",feature3:"La funzione di recupero password è disponibile",feature4:"Gli amministratori possono reimpostare le password utente via email",errors:{requiredFields:"Compilare tutti i campi obbligatori",usernameRequired:"Il nome utente è obbligatorio quando l'autenticazione è abilitata",enterTestEmail:"Inserire un indirizzo email di test",smtpServerAndEmail:"Compilare Server SMTP e Email mittente prima di testare",usernamePasswordRequired:"Nome utente e password sono obbligatori quando l'autenticazione è abilitata",configureSmtpFirst:"Configurare e testare le impostazioni SMTP prima",enableAuthFirst:"Per utilizzare le funzionalità basate sulla posta elettronica, è necessario prima abilitare l'autenticazione."},success:{settingsSaved:"Impostazioni SMTP salvate con successo"},securityOptions:{starttls:"STARTTLS (Porta 587)",ssl:"SSL/TLS (Porta 465)",none:"Nessuna (Porta 25)"},authOptions:{enabled:"Abilitata",disabled:"Disabilitata"}},appearance:"Aspetto",notifications:"Notifiche",smartPlugs:"Prese smart",spoolman:"Spoolman",updates:"Aggiornamenti",language:"Lingua",languageDescription:"Seleziona la lingua preferita",theme:"Tema",themeLight:"Chiaro",themeDark:"Scuro",themeSystem:"Sistema",defaultView:"Vista predefinita",defaultViewDescription:"Pagina da mostrare all'apertura dell'app",checkForUpdates:"Controlla aggiornamenti",autoUpdate:"Aggiornamento automatico",currentVersion:"Versione attuale",latestVersion:"Ultima versione",upToDate:"Sei aggiornato",updateAvailable:"Aggiornamento disponibile",notificationLanguage:"Lingua notifiche",notificationLanguageDescription:"Lingua per notifiche push",bedCooledThreshold:"Soglia raffreddamento piatto",bedCooledThresholdDescription:"Temperatura sotto la quale il piatto è considerato raffreddato dopo una stampa",userNotificationsEnabled:"Notifiche utente",userNotificationsEnabledDescription:"Abilita il menu notifiche utente e le notifiche e-mail per gli eventi di stampa. Richiede l'autenticazione avanzata.",userNotificationsDisabledHint:"Abilita l'autenticazione avanzata per usare le notifiche utente.",notificationProviders:"Provider notifiche",addProvider:"Aggiungi provider",editProvider:"Modifica provider",providerType:"Tipo provider",testNotification:"Notifica di test",testSuccess:"Notifica di test inviata",testFailed:"Invio notifica di test fallito",quietHours:"Ore silenziose",quietHoursDescription:"Non disturbare in queste ore",quietHoursStart:"Inizio",quietHoursEnd:"Fine",events:{title:"Eventi notifica",printStart:"Stampa avviata",printComplete:"Stampa completata",printFailed:"Stampa fallita",printStopped:"Stampa interrotta",printProgress:"Avanzamento",printProgressDescription:"Notifica al 25%, 50%, 75%",printerOffline:"Stampante offline",printerError:"Errore stampante",filamentLow:"Filamento in esaurimento",maintenanceDue:"Manutenzione dovuta",maintenanceDueDescription:"Notifica quando serve manutenzione"},smartPlug:{title:"Prese smart",add:"Aggiungi presa smart",edit:"Modifica presa smart",name:"Nome",ipAddress:"Indirizzo IP",linkedPrinter:"Stampante collegata",autoOn:"Accensione automatica",autoOnDescription:"Accendi all'avvio stampa",autoOff:"Spegnimento automatico",autoOffDescription:"Spegni dopo il completamento",offDelay:"Ritardo spegnimento",offDelayMinutes:"Minuti dopo la stampa",offDelayTemp:"Quando ugello sotto temperatura",currentState:"Stato attuale",turnOn:"Accendi",turnOff:"Spegni"},filamentTracking:"Tracciamento filamento",filamentTrackingDesc:"Scegli come tracciare le bobine di filamento. Puoi usare l'inventario integrato o collegare un server Spoolman esterno.",filamentChecks:"Controlli filamento",disableFilamentWarnings:"Disabilita avvisi filamento",disableFilamentWarningsDesc:"Non mostrare avvisi per filamento insufficiente durante la stampa o l'accodamento",preferLowestFilament:"Preferisci il filamento con meno residuo",preferLowestFilamentDesc:"Quando più bobine corrispondono, usa quella con meno filamento rimanente",trackingModeBuiltIn:"Inventario integrato",trackingModeBuiltInDesc:"Riconoscimento RFID automatico e tracciamento dell'uso inclusi",trackingModeSpoolmanDesc:"Server esterno per la gestione del filamento",builtInFeatureRfid:"Rileva automaticamente le bobine Bambu Lab RFID nell'AMS",builtInFeatureUsage:"Traccia il consumo di filamento per stampa",builtInFeatureCatalog:"Gestisci bobine, colori e profili K-factor",builtInFeatureThirdParty:"Le bobine di terze parti possono essere assegnate alle bobine dell'inventario",amsSyncButton:"Sincronizza pesi dall'AMS",amsSyncTitle:"Sincronizza pesi bobine dall'AMS",amsSyncMessage:"Questo sovrascriverà tutti i pesi delle bobine dell'inventario con i valori attuali di percentuale rimanente dell'AMS dalle stampanti connesse. Usa questa funzione per recuperare dati di peso corrotti. Le stampanti devono essere online.",amsSyncing:"Sincronizzazione...",amsSyncSuccess:"{{synced}} bobina/e sincronizzata/e, {{skipped}} saltata/e",amsSyncError:"Impossibile sincronizzare i pesi dall'AMS",spoolmanUrl:"URL Spoolman",spoolmanUrlHint:"URL del server Spoolman (es. http://localhost:7912)",spoolmanConnected:"Connesso",spoolmanDisconnected:"Disconnesso",status:"Stato",connect:"Connetti",disconnect:"Disconnetti",howSyncWorks:"Come funziona la sincronizzazione",syncInfoRfidOnly:"Solo le bobine ufficiali Bambu Lab con RFID vengono sincronizzate",syncInfoAutoCreate:"Le nuove bobine vengono create automaticamente in Spoolman alla prima sincronizzazione",syncInfoThirdPartySkipped:"Le bobine non Bambu Lab (terze parti, ricaricate) vengono saltate",linkingExistingSpools:"Collegamento bobine esistenti",linkingExistingSpoolsDesc:`Per collegare le bobine Spoolman esistenti all'AMS, passa il mouse su uno slot AMS e clicca "Collega a Spoolman".`,syncMode:"Modalità sincronizzazione",syncModeAuto:"Automatica",syncModeManual:"Solo manuale",syncModeAutoDesc:"I dati AMS si sincronizzano automaticamente quando vengono rilevate modifiche",syncModeManualDesc:"Sincronizzazione solo quando attivata manualmente",syncAmsData:"Sincronizza dati AMS",syncAmsDataDesc:"Sincronizza manualmente i dati AMS della stampante su Spoolman",allPrinters:"Tutte le stampanti",noDefaultPrinter:"Nessuna predefinita (chiedi ogni volta)",sidebarOrder:"Ordine barra laterale",saveThumbnails:"Salva miniature",captureFinishPhoto:"Acquisisci foto finale",noPrintersConfigured:"Nessuna stampante configurata",archiveMode:{always:"Crea sempre voce archivio",never:"Non creare mai voce archivio",ask:"Chiedi ogni volta"},checkForUpdatesLabel:"Controlla aggiornamenti",checkPrinterFirmware:"Controlla firmware stampante",includeBetaUpdates:"Includi versioni beta",includeBetaUpdatesDesc:"Notifica versioni beta e prerelease durante il controllo aggiornamenti",enableRetry:"Abilita retry",homeAssistantDescription:"Controlla prese smart tramite Home Assistant",environmentManagedLabel:"(Gestito dall'ambiente)",autoEnabledViaEnv:"Abilitato automaticamente tramite variabili d'ambiente",urlFromEnvReadOnly:"Valore impostato dalla variabile d'ambiente HA_URL (sola lettura)",tokenFromEnvReadOnly:"Valore impostato dalla variabile d'ambiente HA_TOKEN (sola lettura)",mqttConnectedTo:"Connesso a",prometheusDescription:"Esponi dati stampante in formato Prometheus",noSmartPlugsTitle:"Nessuna presa smart configurata",noSmartPlugsDescription:"Aggiungi una presa smart Tasmota per monitorare energia e automatizzare il controllo.",noProvidersTitle:"Nessun provider configurato",noProvidersDescription:"Aggiungi un provider per ricevere avvisi.",noTemplatesAvailable:"Nessun template disponibile. Riavvia il backend per generare i template predefiniti.",apiPermissionView:"Visualizza stato stampante e coda",apiPermissionEdit:"Aggiungi e rimuovi elementi dalla coda di stampa",apiKeysEmptyTitle:"Nessuna chiave API",apiKeysEmptyDescription:"Crea una chiave API per integrare servizi esterni.",noUsersFound:"Nessun utente trovato",noGroupsFound:"Nessun gruppo trovato",noGroupsAvailable:"Nessun gruppo disponibile",passwordsDoNotMatch:"Le password non coincidono",systemGroupWarning:"I nomi dei gruppi di sistema non possono essere modificati",authDisabledTitle:"Autenticazione disabilitata",authDisabledFeature1:"Richiedi accesso per usare il sistema",authDisabledFeature2:"Crea più utenti con permessi basati sui gruppi",authDisabledFeature3:"Controlla accesso con 50+ permessi granulari",userHasCreated:"Questo utente ha creato:",userItemsQuestion:"Cosa vuoi fare con questi elementi?",deleteUserConfirm:"Sei sicuro di voler eliminare questo utente?",actionCannotBeUndone:"Questa azione non può essere annullata.",addFirstSmartPlug:"Aggiungi la tua prima presa smart",providers:"Provider",log:"Log",testAll:"Testa tutto",testResults:"Risultati test",testPassedCount:"{{count}} riusciti",testFailedCount:"{{count}} falliti",messageTemplates:"Template messaggi",messageTemplatesDescription:"Personalizza i messaggi per ogni evento.",apiKeys:"Chiavi API",apiKeysDescription:"Crea chiavi API per integrazioni esterne e webhook.",createKey:"Crea chiave",apiKeyCreated:"Chiave API creata con successo",apiKeyCopyWarning:"Copia questa chiave ora - non verra mostrata di nuovo!",useInApiBrowser:"Usa nel Browser API",createNewApiKey:"Crea nuova chiave API",keyName:"Nome chiave",keyNamePlaceholder:"es., Home Assistant, OctoPrint",readStatus:"Leggi stato",readStatusDescription:"Visualizza stato stampante e coda",manageQueue:"Gestisci coda",manageQueueDescription:"Aggiungi e rimuovi elementi dalla coda di stampa",controlPrinter:"Controlla stampante",controlPrinterDescription:"Metti in pausa, riprendi e ferma stampe",unnamedKey:"Chiave senza nome",lastUsed:"Ultimo uso",read:"Lettura",control:"Controllo",createFirstKey:"Crea la tua prima chiave",webhookEndpoints:"Endpoint webhook",webhookApiKeyHint:"Usa la tua chiave API nell'header X-API-Key.",webhook:{getAllStatus:"Ottieni stato di tutte le stampanti",getSpecificStatus:"Ottieni stato di una stampante",addToQueue:"Aggiungi alla coda di stampa",pausePrint:"Metti in pausa stampa",resumePrint:"Riprendi stampa",stopPrint:"Ferma stampa"},apiBrowser:"Browser API",apiBrowserDescription:"Esplora e testa tutti gli endpoint API disponibili.",apiKeyForTesting:"Chiave API per test",apiKeyPlaceholder:"Incolla qui la tua chiave API per testare gli endpoint autenticati...",apiKeyHint:"Questa chiave verra inviata come header X-API-Key.",deleteApiKeyTitle:"Elimina chiave API",deleteApiKeyMessage:"Sei sicuro di voler eliminare questa chiave API? Le integrazioni che la usano non funzioneranno più.",deleteKey:"Elimina chiave",amsDisplayThresholds:"Soglie visualizzazione AMS",amsThresholdsDescription:"Configura soglie colore per umidità e temperatura AMS.",humidity:"Umidità",goodGreen:"Buono (verde)",fairOrange:"Discreto (arancione)",aboveFairBad:"Sopra soglia discreta mostra rosso (scarso)",fairAlsoDryingThreshold:"Questa soglia viene usata anche per attivare l'asciugatura automatica",temperature:"Temperatura",goodBlue:"Buono (blu)",aboveFairHot:"Sopra soglia discreta mostra rosso (caldo)",historyRetention:"Conservazione cronologia",keepSensorHistory:"Mantieni cronologia sensori per",historyRetentionDescription:"I dati più vecchi saranno eliminati automaticamente",defaultPrintOptions:"Opzioni di stampa predefinite",defaultPrintOptionsDescription:"Imposta i valori predefiniti per le opzioni di stampa. Possono essere modificati nella finestra di stampa.",defaultBedLevelling:"Livellamento piatto",defaultBedLevellingDesc:"Livellamento automatico del piatto prima della stampa",defaultFlowCali:"Calibrazione flusso",defaultFlowCaliDesc:"Calibra il flusso di estrusione",defaultVibrationCali:"Calibrazione vibrazioni",defaultVibrationCaliDesc:"Riduce gli artefatti di ringing",defaultLayerInspect:"Ispezione primo strato",defaultLayerInspectDesc:"Ispezione IA del primo strato",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Registra un video timelapse",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Conferma piatto libero",requirePlateClear:"Richiedi conferma piatto libero",requirePlateClearDescription:'Quando questa opzione è abilitata, lo scheduler attende una conferma per stampante che il piatto sia libero prima di avviare le stampe in coda su stampanti con lavori completati. Disabilitandola vengono nascosti anche il badge di stato del piatto e il pulsante "Segna il piatto come liberato" sulle schede stampante.',gcodeInjection:"Iniezione G-code",gcodeInjectionDescription:`Configura G-code personalizzato da iniettare all'inizio e/o alla fine delle stampe per sistemi di stampa automatica come Farmloop, SwapMod, AutoClear e Printflow 3D. Gli snippet sono configurati per modello di stampante e applicati quando "Inietta G-code" è abilitato su un elemento della coda.`,gcodeInjectionNoPrinters:"Nessuna stampante trovata. Aggiungi stampanti per configurare gli snippet G-code.",gcodeStartLabel:"G-code iniziale",gcodeEndLabel:"G-code finale",gcodeStartPlaceholder:"G-code inserito prima dell'inizio della stampa...",gcodeEndPlaceholder:"G-code aggiunto dopo la fine della stampa...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Asciugatura automatica",queueDryingDescription:"Asciugare automaticamente il filamento AMS quando la stampante è inattiva tra le stampe in coda. Usa la soglia di umidità sopra.",queueDryingEnabled:"Abilita asciugatura automatica",queueDryingEnabledDescription:"Avvia l'asciugatura AMS automaticamente quando la stampante è inattiva e l'umidità supera la soglia",queueDryingBlock:"Attendi completamento asciugatura",queueDryingBlockDescription:"Blocca la coda di stampa fino al completamento dell'asciugatura. Se disattivato, le stampe hanno priorità.",ambientDryingEnabled:"Asciugatura ambientale",ambientDryingEnabledDescription:"Asciuga automaticamente il filamento sulle stampanti inattive quando l'umidità supera la soglia, anche senza stampe in coda.",dryingPresets:"Preset di asciugatura",dryingPresetsDescription:"Temperatura e durata per tipo di filamento. AMS 2 Pro usa temperature più basse, AMS-HT supporta temperature più alte.",dryingFilament:"Filamento",printModal:"Modale stampa",expandCustomMapping:"Espandi mapping personalizzato di default",expandCustomMappingDescription:"Quando stampi su più stampanti, mostra mapping AMS per stampante espanso",authentication:"Autenticazione",authEnabledDescription:"La tua istanza è protetta con autenticazione",authDisabledDescription:"Abilita per richiedere accesso e gestire utenti",authDisabledMessage:"Abilita autenticazione per creare account, gestire permessi e proteggere la tua istanza Bambuddy.",enableAuthentication:"Abilita autenticazione",currentUser:"Utente corrente",changePassword:"Cambia password",admin:"Admin",users:"Utenti",addUser:"Aggiungi utente",groups:"Gruppi",addGroup:"Aggiungi gruppo",system:"Sistema",noDescription:"Nessuna descrizione",userCount:"{{count}} utenti",permissionCount:"{{count}} permessi",createUser:"Crea utente",username:"Nome utente",enterUsername:"Inserisci nome utente",password:"Password",enterPassword:"Inserisci password (min 6 caratteri)",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Conferma password",viewReleaseOnGitHub:"Vedi release su GitHub",turnAllPlugsOn:"Accendi tutte le prese",turnAllPlugsOff:"Spegni tutte le prese",clearNotificationLogs:"Cancella log notifiche",clearLogsMessage:"Questo eliminerà definitivamente tutti i log notifiche più vecchi di 30 giorni. Questa azione non può essere annullata.",clearLogs:"Cancella log",resetUiPreferences:"Reimposta preferenze UI",resetUiPreferencesMessage:"Questo reimposterà le preferenze UI ai valori predefiniti: ordine barra laterale, tema, layout dashboard, modalità vista e preferenze ordinamento. Stampanti, archivi e impostazioni server NON saranno modificati. La pagina si ricaricherà dopo la cancellazione.",resetPreferences:"Reimposta preferenze",deleteGroupTitle:"Elimina gruppo",deleteGroupMessage:"Sei sicuro di voler eliminare questo gruppo? Gli utenti in questo gruppo perderanno questi permessi.",deleteGroup:"Elimina gruppo",disableAuthenticationTitle:"Disabilita autenticazione",disableAuthenticationMessage:"Sei sicuro di voler disabilitare l'autenticazione? Questo renderà la tua istanza Bambuddy accessibile senza login. Tutti gli utenti resteranno nel database ma l'autenticazione sarà disabilitata.",disableAuthentication:"Disabilita autenticazione",configureBambuddy:"Configura Bambuddy",systemDefault:"Predefinito di sistema",archiveSettings:"Impostazioni archivio",newWindow:"Nuova finestra",embeddedOverlay:"Overlay incorporato",preferredSlicer:"Slicer preferito",preferredSlicerDescription:"Scegli quale applicazione slicer usare per aprire i file",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"Camere esterne",costTracking:"Tracciamento costi",printsOnly:"Solo stampe",totalConsumption:"Consumo totale",dataManagement:"Gestione dati",storageUsage:"Memoria utilizzata",storageUsageDescription:"Ripartizione della memoria per categoria",storageUsageTotal:"Totale",storageUsageErrors:"Errori",storageUsageOtherBreakdown:"Altro (include risorse statiche, script e file di configurazione)",storageUsageSystem:"Sistema",storageUsageData:"Dati",storageUsageUnavailable:"Informazioni sull'utilizzo della memoria non disponibili",clearNotificationLogsDescription:"Elimina log notifiche più vecchi di 30 giorni",resetUiPreferencesDescription:"Reimposta ordine barra laterale, tema, modalità vista e preferenze layout. Stampanti, archivi e impostazioni non vengono modificati.",enableHomeAssistant:"Abilita Home Assistant",enableMqtt:"Abilita MQTT",useTls:"Usa TLS",enableMetricsEndpoint:"Abilita endpoint metriche",availableMetrics:"Metriche disponibili",editUser:"Modifica utente",deleteUserTitle:"Elimina utente",groupName:"Nome gruppo",leaveEmptyForAnonymous:"Lascia vuoto per anonimo",leaveEmptyForNoAuth:"Lascia vuoto per nessuna autenticazione",enterNewPassword:"Inserisci nuova password",confirmNewPassword:"Conferma nuova password",enterGroupName:"Inserisci nome gruppo",enterDescriptionOptional:"Inserisci descrizione (opzionale)",enterCurrentPassword:"Inserisci password attuale",enterNewPasswordMin6:"Inserisci nuova password (min 6 caratteri)",toast:{keyCopied:"Chiave copiata negli appunti",copyFailed:"Copia chiave fallita",keyAddedToBrowser:"Chiave aggiunta al Browser API",clearLogsFailed:"Eliminazione log fallita",uiPreferencesReset:"Preferenze UI reimpostate. Aggiornamento...",authDisabled:"Autenticazione disabilitata con successo",authDisableFailed:"Disabilitazione autenticazione fallita",apiKeyCreated:"Chiave API creata",apiKeyDeleted:"Chiave API eliminata",userCreated:"Utente creato con successo",userUpdated:"Utente aggiornato con successo",userDeleted:"Utente eliminato con successo",groupCreated:"Gruppo creato con successo",groupUpdated:"Gruppo aggiornato con successo",groupDeleted:"Gruppo eliminato con successo",fillRequiredFields:"Compila tutti i campi obbligatori",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri",enterGroupName:"Inserisci un nome gruppo",settingsSaved:"Impostazioni salvate",noPermissionUpdate:"Non hai il permesso di modificare le impostazioni",cameraSettingsSaved:"Impostazioni camera salvate",enterCameraUrl:"Inserisci un URL camera",passwordChanged:"Password cambiata con successo",connectionFailed:"Connessione fallita",testFailed:"Test fallito",cameraConnected:"Camera connessa{{resolution}}"},testConnection:"Testa connessione",catalog:{spoolCatalog:"Catalogo bobine",spoolCatalogDescription:"Pesi delle bobine vuote per marca/tipo. Utilizzato per la ricerca automatica del peso quando si aggiungono bobine.",searchCatalog:"Cerca nel catalogo...",addNewEntry:"Aggiungi nuova voce",namePlaceholder:"Nome (es. Bambu Lab - Plastica)",weight:"Peso",type:"Tipo",default:"Predefinito",custom:"Personalizzato",noMatch:"Nessuna voce corrisponde alla ricerca",empty:"Nessuna voce nel catalogo",deleteEntry:"Elimina voce",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',resetCatalog:"Ripristina catalogo",resetConfirm:"Ripristinare il catalogo ai valori predefiniti? Tutte le voci personalizzate verranno rimosse.",loadFailed:"Impossibile caricare il catalogo bobine",nameWeightRequired:"Nome e peso sono obbligatori",entryAdded:"Voce aggiunta",addFailed:"Impossibile aggiungere la voce",entryUpdated:"Voce aggiornata",updateFailed:"Impossibile aggiornare la voce",entryDeleted:"Voce eliminata",deleteFailed:"Impossibile eliminare la voce",resetSuccess:"Catalogo ripristinato ai valori predefiniti",resetFailed:"Impossibile ripristinare il catalogo",exported:"{{count}} voci esportate",imported:"{{added}} voci importate ({{skipped}} saltate)",importFailed:"Impossibile importare: formato JSON non valido",exportTooltip:"Esporta catalogo in JSON",importTooltip:"Importa catalogo da JSON",resetTooltip:"Ripristina valori predefiniti",selectedCount:"{{count}} selezionati",deleteSelected:"Elimina selezionati",bulkDeleteConfirm:"Eliminare {{count}} voci?",bulkDeleted:"{{count}} voci eliminate",bulkDeleteFailed:"Impossibile eliminare le voci"},colorCatalog:{title:"Catalogo colori",description:"Colori del filamento per produttore/materiale. Utilizzato per la ricerca automatica del colore quando si aggiungono bobine.",searchColors:"Cerca colori...",allManufacturers:"Tutti i produttori",addNewColor:"Aggiungi nuovo colore",manufacturer:"Produttore",colorName:"Nome colore",hex:"Hex",materialOptional:"Materiale (opzionale)",showing:"Visualizzazione di {{filtered}} su {{total}} colori",noMatch:"Nessun colore corrisponde alla ricerca",empty:"Nessun colore nel catalogo",deleteColor:"Elimina colore",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',resetCatalog:"Ripristina catalogo colori",resetConfirm:"Ripristinare il catalogo ai valori predefiniti? Tutti i colori personalizzati verranno rimossi.",sync:"Sincronizza",starting:"Avvio...",syncTooltip:"Sincronizza da FilamentColors.xyz (2000+ colori, potrebbe richiedere un minuto)",loadFailed:"Impossibile caricare il catalogo colori",fieldsRequired:"Produttore, nome colore e colore hex sono obbligatori",colorAdded:"Colore aggiunto",addFailed:"Impossibile aggiungere il colore",colorUpdated:"Colore aggiornato",updateFailed:"Impossibile aggiornare il colore",colorDeleted:"Colore eliminato",deleteFailed:"Impossibile eliminare il colore",resetSuccess:"Catalogo colori ripristinato ai valori predefiniti",resetFailed:"Impossibile ripristinare il catalogo",syncUpToDate:"Già aggiornato ({{count}} colori verificati)",syncComplete:"{{added}} nuovi colori aggiunti ({{skipped}} già esistenti)",syncError:"Errore di sincronizzazione",syncFailed:"Impossibile sincronizzare da FilamentColors.xyz",exported:"{{count}} colori esportati",imported:"{{added}} colori importati ({{skipped}} saltati)",importFailed:"Impossibile importare: formato JSON non valido",selectedCount:"{{count}} selezionati",deleteSelected:"Elimina selezionati",bulkDeleteConfirm:"Eliminare {{count}} colori?",bulkDeleted:"{{count}} colori eliminati",bulkDeleteFailed:"Impossibile eliminare i colori"},dateFormat:"Formato data",dateFormatUs:"US (MM/GG/AAAA)",dateFormatEu:"EU (GG/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-GG)",timeFormat:"Formato ora",timeFormat12:"12 ore (3:30 PM)",timeFormat24:"24 ore (15:30)",defaultPrinter:"Stampante predefinita",defaultPrinterDescription:"Preseleziona questa stampante per upload, ristampe e altre operazioni.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Trascina gli elementi nella barra laterale per riordinare. Ripristina l'ordine predefinito qui.",setDefault:"Imposta predefinito",sidebarOrderSetDefaultHint:"Imposta predefinito applica l'ordine attuale del menu agli utenti che non hanno ancora personalizzato il proprio.",sidebarDefaultSet:"L'ordine predefinito del menu è stato impostato.",sidebarDefaultCleared:"Ordine predefinito del menu cancellato.",sidebarDefaultFailed:"Impossibile impostare l'ordine predefinito del menu.",reset:"Ripristina",darkMode:"Modalità scura",lightMode:"Modalità chiara",active:"(attivo)",background:"Sfondo",accent:"Accento",style:"Stile",bgNeutral:"Neutro",bgWarm:"Caldo",bgCool:"Freddo",bgOled:"OLED Nero",bgSlate:"Blu ardesia",bgForest:"Verde foresta",accentGreen:"Verde",accentTeal:"Verde acqua",accentBlue:"Blu",accentOrange:"Arancione",accentPurple:"Viola",accentRed:"Rosso",styleClassic:"Classico",styleGlow:"Luminoso",styleVibrant:"Vibrante",themeToggleHint:"Passa tra modalità scura e chiara con l'icona sole/luna nella barra laterale.",autoArchivePrints:"Archiviazione automatica stampe",autoArchiveDescription:"Salva automaticamente i file 3MF al completamento delle stampe",saveThumbnailsDescription:"Estrai e salva le immagini di anteprima dai file 3MF",captureFinishPhotoDescription:"Scatta una foto dalla fotocamera della stampante al completamento della stampa",ffmpegNotInstalled:"ffmpeg non installato",ffmpegRequired:"L'acquisizione dalla fotocamera richiede ffmpeg. Installalo tramite <brew>brew install ffmpeg</brew> (macOS) o <apt>apt install ffmpeg</apt> (Linux).",camera:"Fotocamera",cameraViewMode:"Modalità visualizzazione fotocamera",cameraOverlayDescription:"La fotocamera si apre in un overlay ridimensionabile sulla schermata principale",cameraWindowDescription:"La fotocamera si apre in una finestra separata del browser",externalCamerasDescription:"Configura fotocamere esterne per sostituire la fotocamera integrata della stampante. Supporta stream MJPEG, RTSP, snapshot HTTP e fotocamere USB (V4L2). Quando abilitata, la fotocamera esterna viene usata per la vista in diretta e le foto di completamento.",cameraPlaceholderUsb:"Percorso dispositivo (/dev/video0)",cameraPlaceholderUrl:"URL fotocamera (rtsp://... o http://...)",cameraTypeMjpeg:"Stream MJPEG",cameraTypeRtsp:"Stream RTSP",cameraTypeSnapshot:"Snapshot HTTP",cameraTypeUsb:"Fotocamera USB (V4L2)",cameraRotation:"Rotazione",test:"Test",connected:"Connesso",disconnected:"Disconnesso",currency:"Valuta",defaultFilamentCost:"Costo filamento predefinito (per kg)",electricityCost:"Costo elettricità per kWh",energyDisplayMode:"Modalità visualizzazione energia",energyModePrintDescription:"La dashboard mostra la somma dell'energia usata durante le stampe",energyModeTotalDescription:"La dashboard mostra l'energia totale dalle prese smart",fileManager:"Gestore file",createArchiveEntry:"Crea voce archivio durante la stampa",createArchiveEntryDescription:"Quando si stampa dal gestore file, crea opzionalmente una voce di archivio",lowDiskSpaceWarning:"Avviso spazio disco insufficiente",lowDiskSpaceDescription:"Mostra avviso quando lo spazio disco scende sotto questa soglia",printerFirmware:"Firmware stampante",checkFirmwareDescription:"Controlla aggiornamenti firmware da Bambu Lab",bambuddySoftware:"Software Bambuddy",autoCheckDescription:"Controlla automaticamente nuove versioni all'avvio",checkNow:"Controlla ora",updateAvailableVersion:"Aggiornamento disponibile: v{{version}}",releaseNotes:"Note di rilascio",updateViaDocker:"Aggiorna tramite Docker Compose:",installUpdate:"Installa aggiornamento",latestVersionRunning:"Stai usando l'ultima versione",failedToCheckUpdates:"Controllo aggiornamenti fallito: {{error}}",backupRestore:"Backup e ripristino",backupRestoreDescription:"Esporta/importa impostazioni e configura backup GitHub",goToBackup:"Vai al backup",externalUrl:"URL esterno",externalUrlDescription:"L'URL esterno dove Bambuddy è accessibile. Usato per immagini di notifica e integrazioni esterne.",bambuddyUrl:"URL Bambuddy",externalUrlHint:"Includi protocollo e porta (es. http://192.168.1.100:8000)",ftpRetry:"Riprova FTP",ftpRetryDescription:"Riprova le operazioni FTP quando il WiFi della stampante è instabile. Si applica a download 3MF, upload stampe, download timelapse e aggiornamenti firmware.",autoRetryDescription:"Riprova automaticamente le operazioni FTP fallite",retryAttempts:"Tentativi di ripetizione",retryDelay:"Ritardo ripetizione",connectionTimeout:"Timeout connessione",time_one:"{{count}} volta",time_other:"{{count}} volte",second_one:"{{count}} secondo",second_other:"{{count}} secondi",nSeconds:"{{count}} secondi",increaseForWeakWifi:"Aumenta per stampanti con WiFi debole",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Connetti a Home Assistant per controllare le prese smart tramite l'API REST HA. Supporta entità switch, light, input_boolean e script.",homeAssistantUrl:"URL Home Assistant",longLivedAccessToken:"Token di accesso a lunga durata",haTokenHint:"Crea un token in HA: Profilo → Token di accesso a lunga durata → Crea token",connectionSuccessful:"Connessione riuscita",connectionFailed:"Connessione fallita",haConnectionSuccess:"Connesso con successo a Home Assistant.",haConnectionFailed:"Connessione a Home Assistant fallita.",mqttPublishing:"Pubblicazione MQTT",mqttDescription:"Pubblica eventi BamBuddy su un broker MQTT esterno per l'integrazione con Node-RED, Home Assistant e altri sistemi di automazione.",mqttEnableDescription:"Pubblica eventi su broker MQTT esterno",brokerHostname:"Hostname broker",port:"Porta",usernameOptional:"Nome utente (opzionale)",passwordOptional:"Password (opzionale)",topicPrefix:"Prefisso topic",topicPrefixHint:"I topic saranno: {{prefix}}/printers/<serial>/status, ecc.",prometheusMetrics:"Metriche Prometheus",prometheusEndpointDescription:"Esponi metriche stampante su <code>/api/v1/metrics</code> per monitoraggio Prometheus/Grafana.",bearerTokenOptional:"Token Bearer (opzionale)",bearerTokenHint:"Se impostato, le richieste devono includere <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Stato connessione",metricsPrinterState:"Stato stampante (idle/printing/ecc)",metricsPrintProgress:"Progresso stampa 0-100%",metricsBedTemp:"Temperatura piatto",metricsNozzleTemp:"Temperatura ugello",metricsPrintsTotal:"Stampe totali per risultato",metricsMore:"...e altro (strati, ventole, coda, consumo filamento)",smartPlugsDescription:"Connetti prese smart (Tasmota o Home Assistant) per automatizzare il controllo dell'alimentazione e monitorare il consumo energetico delle stampanti.",allOn:"Tutte accese",allOff:"Tutte spente",addSmartPlug:"Aggiungi presa smart",energySummary:"Riepilogo energia",currentPower:"Potenza attuale",plugsOnline:"{{reachable}}/{{total}} prese online",today:"Oggi",yesterday:"Ieri",total:"Totale",enablePlugsForSummary:"Abilita le prese per vedere il riepilogo energia",addNotificationProvider:"Aggiungi",systemBadge:"(Sistema)",creating:"Creazione...",changing:"Modifica...",deleteUserAndItems:"Elimina utente E i suoi elementi",deleteUserKeepItems:"Elimina utente, mantieni elementi (diventeranno senza proprietario)",ok:"OK",twoFa:{totpTitle:"App Authenticator (TOTP)",totpDesc:"Usa un'app come Google Authenticator, Aegis o Authy.",emailOtpTitle:"OTP via e-mail",emailOtpDesc:"Invia un codice monouso a {{email}} al momento del login.",emailOtpNoEmail:"Aggiungi un indirizzo e-mail al tuo account per abilitare questo metodo.",addEmailFirst:"Il tuo account non ha un indirizzo e-mail. Chiedi a un amministratore di aggiungerne uno.",setupTotp:"Configura app Authenticator",setupAuthApp:"Configura app Authenticator",setupInstructions:"Scansiona il codice QR con la tua app authenticator, poi conferma con un codice.",manualEntry:"Impossibile scansionare? Inserisci questo segreto manualmente:",scannedContinue:"Codice scansionato — continua",enterCodeToConfirm:"Inserisci il codice a 6 cifre dalla tua app authenticator per confermare.",activate:"Attiva",disableTotp:"Disabilita Authenticator",disableConfirmHint:"Inserisci un codice TOTP valido o un codice di backup per disabilitare l'authenticator.",totpDisabled:"App Authenticator disabilitata.",emailOtpEnabled:"OTP via e-mail abilitato.",emailOtpDisabled:"OTP via e-mail disabilitato.",smtpRequired:"Configura e testa prima le impostazioni SMTP.",invalidCode:"Codice non valido. Riprova.",enableEmailOtp:"Abilita OTP via e-mail",disableEmailOtp:"Disabilita OTP via e-mail",emailSetupEnterCode:"È stato inviato un codice di verifica al tuo indirizzo e-mail. Inseriscilo qui sotto per confermare che possiedi questa casella di posta.",verifyAndEnable:"Verifica e abilita",emailDisablePasswordHint:"Inserisci la password del tuo account per confermare la disabilitazione dell'OTP via e-mail.",passwordPlaceholder:"Inserisci la tua password",backupCodesTitle:"Salva i tuoi codici di backup",backupCodesWarning:"Conserva questi codici in un posto sicuro. Ogni codice può essere usato una sola volta.",backupCodesRemaining:"{{count}} codici di backup rimanenti",savedCodes:"Codici salvati",regenBackup:"Rigenera codici di backup",regenBackupHint:"Inserisci il tuo codice TOTP corrente per generare 10 nuovi codici di backup.",newBackupCodes:"Nuovi codici di backup",linkedAccounts:"Account SSO collegati",linkedAccountsDesc:"Questi provider di identità esterni sono collegati al tuo account.",oidcUnlinked:"Account scollegato."},oidc:{title:"Provider SSO / OIDC",desc:"Configura provider OpenID Connect per il single sign-on.",addProvider:"Aggiungi provider",newProvider:"Nuovo provider",empty:"Nessun provider OIDC configurato.",created:"Provider creato.",updated:"Provider aggiornato.",deleted:"Provider eliminato.",deleteTitle:"Elimina provider",deleteMessage:'Eliminare "{{name}}"? Tutti gli account collegati verranno disconnessi.',form:{name:"Nome visualizzato",issuerUrl:"URL emittente",clientId:"Client ID",clientSecret:"Client secret",scopes:"Scope",iconUrl:"URL icona (opzionale)",enabled:"Abilitato",autoCreate:"Crea utenti automaticamente",autoCreateDesc:"Crea automaticamente un account locale al primo accesso.",autoLink:"Collega automaticamente gli account esistenti",autoLinkDesc:"Collega gli account locali esistenti tramite email al primo accesso.",secretHint:"lascia vuoto per mantenere",secretPlaceholder:"nuovo segreto",emailClaim:"Claim email",emailClaimDesc:"Claim JWT usato come identità email. Usare 'preferred_username' o 'upn' per Azure Entra ID (che non invia email_verified). Usare solo nomi di claim affidabili.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"Richiedi verifica email",requireEmailVerifiedDesc:"Accetta il claim email solo se il provider lo contrassegna come verificato.",requireEmailVerifiedWarning:"Attenzione: l'email sarà accettata senza verifica. Usare solo con provider affidabili.",requireEmailVerifiedAutoLink:"Disabilitare prima il collegamento automatico per modificare questa impostazione."}},spoolbuddy:{infoTitle:"Dispositivi SpoolBuddy",infoBody:"I kiosk SpoolBuddy si registrano automaticamente tramite heartbeat. Annulla la registrazione qui se un dispositivo non è più in uso o se un duplicato obsoleto è rimasto dopo un crash del daemon.",duplicatesTitle:"{{count}} dispositivi registrati",duplicatesBody:"Solo il primo dispositivo registrato viene utilizzato dall'interfaccia kiosk. Se uno di questi è un duplicato obsoleto da un crash, annulla la sua registrazione — un dispositivo online si ri-registrerà al prossimo heartbeat.",empty:"Nessun dispositivo SpoolBuddy registrato.",online:"Online",offline:"Offline",unregister:"Annulla registrazione",unregisterSuccess:"Dispositivo deregistrato",unregisterError:"Deregistrazione non riuscita",confirmTitle:"Annullare la registrazione del dispositivo SpoolBuddy?",confirmBody:'Questo rimuoverà "{{hostname}}" ({{deviceId}}) dal database. Se il dispositivo è online, si ri-registrerà al prossimo heartbeat.',ipAddress:"Indirizzo IP",firmware:"Firmware",lastSeen:"Ultimo rilevamento",daemonUptime:"Uptime del daemon",systemUptime:"Uptime sistema",never:"mai",nfc:"NFC",scale:"Bilancia",cpuTemp:"Temp. CPU",memory:"Memoria",disk:"Disco",update:"Aggiorna",updateConfirmTitle:"Aggiornare il daemon Spoolbuddy?",updateConfirmBody:`Avviare un aggiornamento software su "{{hostname}}"? Il daemon si riavvierà al termine dell'aggiornamento.`,restartBrowser:"Riavvia browser",restartBrowserConfirmTitle:"Riavviare il browser del kiosk?",restartBrowserConfirmBody:'Riavviare il browser del kiosk su "{{hostname}}"? Il display si oscurerà brevemente.',restartDaemon:"Riavvia daemon",restartDaemonConfirmTitle:"Riavviare il daemon Spoolbuddy?",restartDaemonConfirmBody:'Riavviare il daemon Spoolbuddy su "{{hostname}}"? Il dispositivo sarà offline per alcuni secondi.',reboot:"Riavvia",rebootConfirmTitle:"Riavviare il dispositivo?",rebootConfirmBody:'Riavviare "{{hostname}}"? Il dispositivo sarà offline per circa un minuto.',shutdown:"Spegni",shutdownConfirmTitle:"Spegnere il dispositivo?",shutdownConfirmBody:'Spegnere "{{hostname}}"? Sarà necessario un accesso fisico per riaccenderlo.',commandConfirm:"Conferma",commandQueued:"Comando in coda",commandError:"Invio comando non riuscito"}},notification:{printStarted:{title:"Stampa avviata",body:"{{printer}}: {{filename}} ha iniziato a stampare"},printCompleted:{title:"Stampa completata",body:"{{printer}}: {{filename}} completata con successo"},printFailed:{title:"Stampa fallita",body:"{{printer}}: {{filename}} fallita"},printStopped:{title:"Stampa interrotta",body:"{{printer}}: {{filename}} interrotta"},printProgress:{title:"Avanzamento stampa",body:"{{printer}}: {{filename}} al {{percent}}% completamento"},printerOffline:{title:"Stampante offline",body:"{{printer}} e offline"},printerError:{title:"Errore stampante",body:"{{printer}}: {{error}}"},filamentLow:{title:"Filamento in esaurimento",body:"{{printer}}: Filamento in esaurimento"},maintenanceDue:{title:"Manutenzione dovuta",body:"{{printer}}: {{items}} richiedono attenzione"}},errors:{generic:"Qualcosa e andato storto",networkError:"Errore di rete. Controlla la connessione.",notFound:"Non trovato",unauthorized:"Non autorizzato",serverError:"Errore server",validationError:"Controlla i dati inseriti",printerConnectionFailed:"Connessione alla stampante fallita",saveFailed:"Salvataggio modifiche fallito",deleteFailed:"Eliminazione fallita",loadFailed:"Caricamento dati fallito"},hmsErrors:{title:"Errori - {{name}}",noErrors:"Nessun errore",viewOnWiki:"Vedi su Bambu Lab Wiki",clearInstructions:"Cancella gli errori sulla stampante per rimuoverli qui.",clearErrors:"Cancella errori",clearSuccess:"Errori HMS cancellati",clearFailed:"Impossibile cancellare gli errori HMS"},mqttDebug:{title:"Log debug MQTT",searchPlaceholder:"Cerca topic o payload...",noMessages:"Nessun messaggio registrato",startLoggingHint:'Clicca "Avvia logging" per iniziare a catturare messaggi MQTT',noMessagesMatch:"Nessun messaggio corrisponde al filtro",adjustFilterHint:"Prova a modificare la ricerca o i filtri",incoming:"In ingresso",outgoing:"In uscita",loggingStopped:"Logging fermato",loggingActive:"Logging attivo - i messaggi si aggiornano automaticamente",startLogging:"Avvia logging",stopLogging:"Ferma logging",clearLog:"Pulisci log",topic:"Topic",timestamp:"Timestamp",direction:"Direzione",all:"Tutti"},printerFiles:{title:"Gestore file",storageUsed:"Usato:",storageFree:"Libero:",filterPlaceholder:"Filtra file...",deleteButton:"Elimina",deleteFiles:"Elimina {{count}} file",deleteFileConfirm:'Eliminare "{{name}}"? Questa azione non può essere annullata.',deleteFilesConfirm:"Eliminare {{count}} file selezionati? Questa azione non può essere annullata.",noFiles:"Nessun file sulla stampante",loadingFiles:"Caricamento file...",failedToLoad:"Caricamento file fallito",toast:{filesDeleted:"Eliminati {{count}} file",deleteFailed:"Eliminazione fallita: {{error}}"}},confirm:{delete:"Sei sicuro di voler eliminare questo?",unsavedChanges:"Hai modifiche non salvate. Sei sicuro di voler uscire?",clearQueue:"Sei sicuro di voler svuotare la coda?"},login:{title:"Login Bambuddy",subtitle:"Accedi al tuo account",username:"Nome utente",usernamePlaceholder:"Inserisci il nome utente",usernameOrEmail:"Nome utente o email",usernameOrEmailPlaceholder:"Nome utente o @ Email",password:"Password",passwordPlaceholder:"Inserisci la password",signIn:"Accedi",signingIn:"Accesso in corso...",rememberMe:"Ricordami",forgotPassword:"Hai dimenticato la password?",loginSuccess:"Accesso riuscito",loginFailed:"Accesso fallito",enterCredentials:"Inserisci nome utente e password",enterEmail:"Inserisci il tuo indirizzo e-mail",oidcLoginFailed:"Accesso OIDC fallito",oidcErrors:{providerError:"Il provider di identità ha restituito un errore",missingParameters:"Parametri obbligatori mancanti nel callback OIDC",invalidState:"Lo stato OIDC non è valido o è già stato utilizzato",stateExpired:"La sessione OIDC è scaduta — riprovare",providerNotFound:"Provider OIDC non trovato",discoveryFailed:"Impossibile recuperare il documento di discovery OIDC",invalidDiscovery:"Il documento di discovery OIDC non è valido",networkError:"Errore di rete durante lo scambio di token OIDC",badResponse:"Risposta inattesa durante lo scambio di token OIDC",noIdToken:"Il provider OIDC non ha restituito un ID token",validationFailed:"La validazione del token OIDC non è riuscita",nonceMismatch:"Il nonce OIDC non corrisponde — possibile attacco di replay",missingSubClaim:"Il token OIDC è privo del claim sub",noLinkedAccount:"Nessun account locale è collegato a questa identità OIDC",accountInactive:"Il tuo account è inattivo",userResolutionFailed:"Impossibile risolvere il tuo account",internalError:"Si è verificato un errore interno durante il login OIDC",tokenExchangeFailed:"Lo scambio di token OIDC non è riuscito"},forgotPasswordTitle:"Password dimenticata",forgotPasswordMessage:"Se hai dimenticato la password, contatta il tuo amministratore di sistema per reimpostarla.",forgotPasswordEmailMessage:"Inserisci il tuo indirizzo email e ti invieremo una nuova password.",emailAddress:"Indirizzo email",emailPlaceholder:"tua.email@esempio.com",cancel:"Annulla",sending:"Invio...",sendResetEmail:"Invia email di reimpostazione",howToReset:"Come reimpostare la password:",resetStep1:"Contatta il tuo amministratore Bambuddy",resetStep2:"Chiedi di reimpostare la password in Gestione utenti",resetStep3:"Possono impostare una nuova password temporanea",resetStep4:"Accedi con la nuova password e cambiala in Impostazioni",gotIt:"Capito",twoFA:{title:"Autenticazione a due fattori",subtitle:"Il tuo account è protetto da 2FA. Inserisci il codice di verifica qui sotto.",methodAuthenticator:"App di autenticazione",methodEmail:"Codice via e-mail",methodBackup:"Codice di recupero",instructionsTotp:"Apri la tua app di autenticazione e inserisci il codice a 6 cifre per Bambuddy.",instructionsEmail:"Un codice a 6 cifre è stato inviato al tuo indirizzo e-mail. È valido per 10 minuti.",instructionsEmailNotSent:"Clicca il pulsante qui sotto per ricevere un codice di verifica via e-mail.",instructionsBackup:"Inserisci uno dei tuoi codici di recupero a 8 caratteri. Ogni codice può essere utilizzato una sola volta.",sendCodeButton:"Invia codice via e-mail",sendingCode:"Invio in corso...",resendCode:"Invia nuovamente il codice",codeLabel:"Codice di verifica",backupCodeLabel:"Codice di recupero",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verifica",verifyingButton:"Verifica in corso...",backToLogin:"← Torna alla pagina di accesso",orContinueWith:"oppure accedi con",signInWith:"Accedi con {{provider}}",enterCode:"Inserisci il codice di verifica",sendCodeFailed:"Invio del codice di verifica non riuscito",invalidCode:"Codice non valido. Riprova."},resetPassword:{title:"Imposta nuova password",subtitle:"Inserisci e conferma la nuova password qui sotto.",newPassword:"Nuova password",newPasswordPlaceholder:"Almeno 8 caratteri",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Ripeti la nuova password",saving:"Salvataggio…",submit:"Imposta nuova password",backToLogin:"Torna al login",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve avere almeno 8 caratteri",resetFailed:"Reimpostazione non riuscita. Il link potrebbe essere scaduto."}},setup:{title:"Configurazione Bambuddy",subtitle:"Configura autenticazione per la tua istanza Bambuddy",enableAuth:"Abilita autenticazione",adminAccount:"Account admin",adminAccountDesc:"Se esistono già admin, l'autenticazione verrà abilitata usando gli account esistenti. Lascia i campi sotto vuoti per usare gli admin esistenti, oppure inserisci nuove credenziali per creare un nuovo utente admin.",adminUsername:"Nome utente admin",adminPassword:"Password admin",optionalIfAdminExists:"(opzionale se esistono admin)",adminUsernamePlaceholder:"Inserisci nome utente admin (opzionale)",adminPasswordPlaceholder:"Inserisci password admin (opzionale)",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Conferma password admin",settingUp:"Configurazione...",completeSetup:"Completa configurazione",toast:{authEnabledAdminCreated:"Autenticazione abilitata e utente admin creato",authEnabledExistingAdmins:"Autenticazione abilitata usando admin esistenti",setupCompleted:"Configurazione completata",enterBothCredentials:"Inserisci nome utente e password admin, oppure lascia entrambi vuoti per usare admin esistenti",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri"}},changePassword:{title:"Cambia password",currentPassword:"Password attuale",currentPasswordPlaceholder:"Inserisci password attuale",newPassword:"Nuova password",newPasswordPlaceholder:"Inserisci nuova password (min 6 caratteri)",confirmPassword:"Conferma nuova password",confirmPasswordPlaceholder:"Conferma nuova password",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri",changing:"Modifica in corso...",success:"Password cambiata con successo",failed:"Modifica password fallita"},plateAlert:{title:"Stampa in pausa!",message:"Oggetti rilevati sul piatto. La stampa è stata messa automaticamente in pausa. Svuota il piatto e riprendi la stampa.",understand:"Ho capito"},camera:{title:"Vista camera",invalidPrinterId:"ID stampante non valido",live:"Live",snapshot:"Snapshot",restartStream:"Riavvia stream",refreshSnapshot:"Aggiorna snapshot",fullscreen:"Schermo intero",exitFullscreen:"Esci da schermo intero",connectingToCamera:"Connessione alla camera...",capturingSnapshot:"Acquisizione snapshot...",connectionLost:"Connessione persa",connectionFailed:"Connessione camera fallita",reconnecting:"Riconnessione tra {{countdown}}s... (tentativo {{attempt}}/{{max}})",reconnectNow:"Riconnetti ora",cameraUnavailable:"Camera non disponibile",cameraUnavailableDesc:"Assicurati che la stampante sia accesa e connessa.",noCamera:"Nessuna camera disponibile",retry:"Riprova",cameraStream:"Stream camera",zoomOut:"Zoom indietro",zoomIn:"Zoom avanti",resetZoom:"Reset zoom",recording:"Registrazione",startRecording:"Avvia registrazione",stopRecording:"Ferma registrazione",chamberLight:"Accendi/Spegni luce camera"},groups:{title:"Gestione gruppi",subtitle:"Gestisci gruppi permessi per controllo accesso",backToSettings:"Torna a Impostazioni",createGroup:"Crea gruppo",noPermission:"Non hai il permesso di accedere a questa pagina.",system:"Sistema",noDescription:"Nessuna descrizione",usersCount:"{{count}} utenti",permissionsCount:"{{count}} permessi",edit:"Modifica",delete:"Elimina",toast:{created:"Gruppo creato con successo",updated:"Gruppo aggiornato con successo",deleted:"Gruppo eliminato con successo",enterGroupName:"Inserisci un nome gruppo"},modal:{editGroup:"Modifica gruppo",createGroup:"Crea gruppo",cancel:"Annulla",saving:"Salvataggio...",creating:"Creazione...",saveChanges:"Salva modifiche"},form:{groupName:"Nome gruppo",groupNamePlaceholder:"Inserisci nome gruppo",systemGroupWarning:"I nomi dei gruppi di sistema non possono essere modificati",description:"Descrizione",descriptionPlaceholder:"Inserisci descrizione (opzionale)",permissions:"Permessi ({{count}} selezionati)"},deleteModal:{title:"Elimina gruppo",message:"Sei sicuro di voler eliminare questo gruppo? Gli utenti in questo gruppo perderanno questi permessi.",confirm:"Elimina gruppo"},editor:{title:"Modifica gruppo",createTitle:"Crea gruppo",search:"Cerca permessi...",selectAll:"Seleziona tutto",clearAll:"Deseleziona tutto",permissionsSelected:"{{count}} selezionati",noResults:"Nessun permesso corrisponde alla ricerca"}},users:{title:"Gestione utenti",subtitle:"Gestisci utenti e accesso alla tua istanza Bambuddy",backToSettings:"Torna a Impostazioni",createUser:"Crea utente",noPermission:"Non hai il permesso di accedere a questa pagina.",admin:"Admin",noGroups:"Nessun gruppo",active:"Attivo",inactive:"Inattivo",edit:"Modifica",delete:"Elimina",system:"Sistema",noGroupsAvailable:"Nessun gruppo disponibile",table:{username:"Nome utente",groups:"Gruppi",status:"Stato",actions:"Azioni"},toast:{created:"Utente creato con successo",updated:"Utente aggiornato con successo",deleted:"Utente eliminato con successo",fillRequired:"Compila tutti i campi obbligatori",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri"},modal:{createUser:"Crea utente",editUser:"Modifica utente",cancel:"Annulla",creating:"Creazione...",saving:"Salvataggio...",saveChanges:"Salva modifiche",advancedAuthSubtitle:"con autenticazione avanzata"},form:{username:"Nome utente",usernamePlaceholder:"Inserisci nome utente",email:"Email",emailPlaceholder:"utente@esempio.com",password:"Password",passwordPlaceholder:"Inserisci password",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Conferma password",newPasswordPlaceholder:"Inserisci nuova password",confirmNewPasswordPlaceholder:"Conferma nuova password",leaveBlankToKeep:"lascia vuoto per mantenere attuale",groups:"Gruppi",optional:"opzionale",autoGeneratedPassword:"Una password sicura verrà generata automaticamente e inviata via email all'utente.",passwordManagedByAdvancedAuth:`La password è gestita dall'autenticazione avanzata. Usa "Reimposta password" per inviare una nuova password all'utente via email.`,resetPassword:"Reimposta password",resettingPassword:"Reimpostazione password..."},deleteModal:{title:"Elimina utente",message:"Sei sicuro di voler eliminare questo utente? Questa azione non può essere annullata.",confirm:"Elimina utente"}},streamOverlay:{title:"Overlay stream",invalidPrinterId:"ID stampante non valido",cameraStream:"Stream camera",progress:"Avanzamento",eta:"ETA",printerIdle:"Stampante inattiva",printerOffline:"Stampante offline",status:{printing:"In stampa",paused:"In pausa",finished:"Completata",failed:"Fallita",idle:"Inattiva",unknown:"Sconosciuto"}},profiles:{title:"Profili",subtitle:"Gestisci preset slicer e calibrazioni pressure advance",tabs:{cloud:"Profili cloud",local:"Profili locali",kprofiles:"K-Profiles"},localProfiles:{title:"Profili locali",subtitle:"Importa e gestisci preset slicer da OrcaSlicer",import:"Importa profili",importDesc:"Trascina file .bbscfg, .bbsflmt, .orca_filament, .zip o .json qui",importing:"Importazione...",search:"Cerca preset locali...",noPresets:"Nessun preset locale ancora",badge:"Locale",edit:"Modifica",delete:"Elimina",cancel:"Annulla",deleteConfirmTitle:"Elimina preset",deleteConfirm:"Sei sicuro di voler eliminare questo preset? Questa azione non può essere annullata.",source:"Fonte",inheritsFrom:"Eredita da",filamentType:"Tipo",vendor:"Produttore",compatiblePrinters:"Stampanti",nozzleTemp:"Temp. ugello",cost:"Costo",density:"Densità",pressureAdvance:"Pressure Advance",filament:"Filamento",process:"Processo",printer:"Stampante",toast:{importSuccess:"{{count}} preset importati",importSkipped:"{{count}} preset saltati (duplicati)",importError:"{{count}} errori durante l'importazione",deleted:"Preset eliminato",updated:"Preset aggiornato"}},connectedAs:"Connesso come",logout:"Esci",noLogoutPermission:"Non hai il permesso di disconnetterti",failedToLoad:"Caricamento profili fallito",retry:"Riprova",time:{justNow:"Proprio ora",minsAgo:"{{count}}m fa",hoursAgo:"{{count}}h fa",daysAgo:"{{count}}g fa"},toast:{loggedOut:"Disconnesso"},login:{title:"Connetti a Bambu Cloud",subtitle:"Sincronizza i preset del slicer tra dispositivi",email:"Email",password:"Password",region:"Regione",regionGlobal:"Globale",regionChina:"Cina",verificationCode:"Codice di verifica",totpCode:"Codice autenticatore",checkEmail:"Controlla la tua email ({{email}}) per un codice a 6 cifre",enterTotpHint:"Inserisci il codice a 6 cifre dalla tua app autenticatore",accessToken:"Access Token",accessTokenHint:"Incolla il tuo access token Bambu Lab (da Bambu Studio)",back:"Indietro",loginButton:"Accedi",verifyButton:"Verifica",setTokenButton:"Imposta token",useToken:"Usa access token invece",useEmail:"Accedi con email invece",toast:{loggedIn:"Accesso riuscito",codeSent:"Codice di verifica inviato via email",enterTotp:"Inserisci il codice dalla tua app autenticatore",tokenSet:"Token impostato con successo"}},presets:{myPreset:"Il mio preset (modificabile)",duplicate:"Duplica",editable:"Modificabile",failedToLoadDetails:"Caricamento dettagli preset fallito",deleteConfirm:"Eliminare questo preset?",deleteWarning:'Questo eliminerà definitivamente "{{name}}" da Bambu Cloud. Questa azione non può essere annullata.',noDuplicatePermission:"Non hai il permesso di duplicare preset",noEditPermission:"Non hai il permesso di modificare preset",noDeletePermission:"Non hai il permesso di eliminare preset",types:{filament:"Preset filamento",printer:"Preset stampante",process:"Preset processo"},toast:{deleted:"Preset eliminato",created:"Preset creato",updated:"Preset aggiornato",duplicated:"Preset duplicato",fieldAdded:'Campo "{{key}}" aggiunto',exported:"Preset esportato"},baseLabel:"Base: {{name}}",currentLabel:"Corrente: {{name}}",newPreset:"Nuovo preset",editPreset:"Modifica preset",duplicatePreset:"Duplica preset",createNewPreset:"Crea nuovo preset",customizeSettings:"Personalizza le impostazioni per il nuovo preset",compareWithBase:"Confronta con base",compare:"Confronta",basePreset:"Preset base",selectBasePreset:"Seleziona preset base...",presetName:"Nome preset",myCustomPreset:"Il mio preset personalizzato",inheritsFrom:"Deriva da",dropJsonToImport:"Rilascia JSON per importare",tabs:{common:"Comune",allFields:"Tutti i campi"},availableFields:"Campi disponibili",searchFieldsPlaceholder:"Cerca campi...",noMatchingFields:"Nessun campo corrispondente",allFieldsAdded:"Tutti i campi aggiunti",addCustomField:"Aggiungi campo personalizzato",yourOverrides:"Le tue override",noOverridesYet:"Nessun override ancora",clickFieldsToAdd:"Clicca i campi a sinistra per aggiungerli",saveAsTemplate:"Salva come template",jsonTip:"Suggerimento: trascina e rilascia un file .json ovunque in questa modale per importare impostazioni"},cloudView:{searchPlaceholder:"Cerca preset...",templates:"Template",refresh:"Aggiorna",newPreset:"Nuovo preset",clearFilters:"Pulisci filtri",compareMode:"Modalita confronto",selectAnotherPreset:"Seleziona un altro preset {{type}}",clickTwoPresets:"Clicca due preset dello stesso tipo per confrontare",selectFirst:"1. Seleziona il primo",selectSecond:"2. Seleziona il secondo",compareNow:"Confronta ora",lastSynced:"Ultima sincronizzazione:",showingCount:"Mostrati {{showing}} di {{total}} preset",noPresetsFound:"Nessun preset trovato",columns:{filament:"Filamento",process:"Processo",printer:"Stampante"},noFilamentPresets:"Nessun preset filamento",noProcessPresets:"Nessun preset processo",noPrinterPresets:"Nessun preset stampante",filters:{type:"Tipo",owner:"Proprietario",printer:"Stampante",nozzle:"Ugello",filament:"Filamento",layer:"Layer",all:"Tutti",myPresets:"I miei preset",builtIn:"Integrati",process:"Processo"},noTemplatesPermission:"Non hai il permesso di gestire i template",noRefreshPermission:"Non hai il permesso di aggiornare i profili",noCreatePermission:"Non hai il permesso di creare preset"},templates:{title:"Template rapidi",noTemplates:"Nessun template ancora",createFirst:"Crea template dall'editor preset",typeFilter:"Tipo:",deleteTitle:"Elimina template",deleteWarning:"Questa azione non può essere annullata",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',namePlaceholder:"Nome template",descriptionPlaceholder:"Descrizione",settingsJson:"Impostazioni (JSON)",fieldsCount:"{{count}} campi",shownInModals:"Mostrati nelle modali",hiddenInModals:"Nascosti nelle modali",apply:"Applica",toast:{deleted:"Template eliminato",updated:"Template aggiornato",created:"Template creato",applied:"Template applicato"}}},support:{debugLoggingActive:"Log debug attivo",manageLogs:"Gestisci",collectItem7:"Connettività stampante e versioni firmware",collectItem8:"Stato integrazioni (Spoolman, MQTT, HA)",collectItem9:"Interfacce di rete (solo subnet)",collectItem10:"Versioni dei pacchetti Python",collectItem11:"Controlli di integrità del database",collectItem12:"Dettagli dell'ambiente Docker"},fileManager:{title:"Gestore file",subtitle:"Organizza e gestisci i tuoi file di stampa",uploadFiles:"Carica file",newFolder:"Nuova cartella",folderName:"Nome cartella",folderNamePlaceholder:"es., Parti funzionali",renameFile:"Rinomina file",renameFolder:"Rinomina cartella",moveFiles:"Sposta {{count}} file",rootNoFolder:"Root (nessuna cartella)",current:"corrente",linkFolder:"Collega cartella",linkFolderDescription:'Collega "{{name}}" a un progetto o archivio per accesso rapido.',project:"Progetto",archive:"Archivio",noProjectsFound:"Nessun progetto trovato",noArchivesFound:"Nessun archivio trovato",unlink:"Scollega",link:"Collega",dragDropFiles:"Trascina e rilascia file qui",dropFilesHere:"Rilascia file qui",orClickToBrowse:"oppure clicca per sfogliare",allFileTypesSupported:"Tutti i tipi di file supportati. I file ZIP saranno estratti.",zipFilesDetected:"File ZIP rilevati",zipExtractOptions:"I file ZIP saranno estratti. Scegli come gestire la struttura cartelle:",preserveZipStructure:"Mantieni struttura cartelle dal ZIP",createFolderFromZip:"Crea cartella dal nome ZIP",stlThumbnailGeneration:"Generazione miniature STL",zipMayContainStl:"I file ZIP possono contenere STL. Le miniature possono essere generate durante l'estrazione.",thumbnailsCanBeGenerated:"Le miniature possono essere generate per file STL. I modelli grandi possono richiedere più tempo.",generateThumbnailsForStl:"Genera miniature per file STL",threemfDetected:"File 3MF rilevati",threemfExtractionInfo:"Modello stampante, materiale, colore e impostazioni stampa saranno estratti automaticamente dai file 3MF.",willBeExtracted:"Sara estratto",filesExtracted:"{{count}} file estratti",uploadComplete:"Caricamento completato: {{succeeded}} riusciti",uploadFailed:"Caricamento fallito",zipFilesFailed:"{{count}} file falliti",uploading:"Caricamento...",changeLink:"Cambia collegamento...",linkTo:"Collega a...",linkToProjectOrArchive:"Collega a progetto o archivio",addToQueue:"Aggiungi alla coda",schedulePrint:"Pianifica",generateThumbnail:"Genera miniatura",generateThumbnails:"Genera miniature",generateThumbnailsForMissing:"Genera miniature per STL senza miniatura",gridView:"Vista griglia",listView:"Vista elenco",lowDiskSpaceWarning:"Avviso spazio disco basso",lowDiskSpaceDetails:"Solo {{free}} liberi su {{total}} totali. La soglia e {{threshold}} GB nelle impostazioni.",files:"File",folders:"Cartelle",size:"Dimensione",free:"Libero",allFiles:"Tutti i file",wrap:"A capo",enableTextWrapping:"Abilita a capo testo",disableTextWrapping:"Disabilita a capo testo",collapse:"Comprimi",collapseFoldersByDefault:"Comprimi le cartelle per impostazione predefinita",expandFoldersByDefault:"Espandi le cartelle per impostazione predefinita",dragToResizeTooltip:"Trascina per ridimensionare, doppio clic per reset",searchFiles:"Cerca file...",allTypes:"Tutti i tipi",prints:"Stampe",ascending:"Crescente",descending:"Decrescente",resultsCount:"{{showing}} di {{total}} file",selectAll:"Seleziona tutto",deselectAll:"Deseleziona tutto",selected:"{{count}} selezionati",adding:"Aggiunta...",loadingFiles:"Caricamento file...",folderIsEmpty:"La cartella e vuota",noFilesYet:"Nessun file ancora",folderEmptyDescription:"Carica file o sposta file in questa cartella per iniziare.",noFilesDescription:"Carica file per iniziare a organizzare i file di stampa.",noMatchingFiles:"Nessun file corrispondente",noMatchingFilesDescription:"Nessun file corrisponde ai criteri di ricerca o filtro.",clearFilters:"Pulisci filtri",printedCount:"Stampato {{count}}x",uploadedBy:"Caricato da",deleteFolder:"Elimina cartella",deleteFile:"Elimina file",deleteFilesCount:"Elimina {{count}} file",deleteFolderConfirm:"Sei sicuro di voler eliminare questa cartella? Tutti i file dentro saranno eliminati.",deleteFileConfirm:"Sei sicuro di voler eliminare questo file?",deleteFilesConfirm:"Sei sicuro di voler eliminare {{count}} file selezionati? Questa azione non può essere annullata.",deleting:"Eliminazione...",noPermissionRenameFolder:"Non hai il permesso di rinominare cartelle",noPermissionLinkFolder:"Non hai il permesso di collegare cartelle",noPermissionDeleteFolder:"Non hai il permesso di eliminare cartelle",noPermissionPrint:"Non hai il permesso di stampare",noPermissionSlice:"You do not have permission to slice files",noPermissionAddToQueue:"Non hai il permesso di aggiungere alla coda",noPermissionDownload:"Non hai il permesso di scaricare file",noPermissionRenameFile:"Non hai il permesso di rinominare questo file",noPermissionGenerateThumbnail:"Non hai il permesso di generare miniature",noPermissionDeleteFile:"Non hai il permesso di eliminare questo file",noPermissionCreateFolder:"Non hai il permesso di creare cartelle",noPermissionUpload:"Non hai il permesso di caricare file",noPermissionMoveFiles:"Non hai il permesso di spostare file",noPermissionDeleteFiles:"Non hai il permesso di eliminare file",linkExternal:"Collega esterno",linkExternalFolder:"Collega cartella esterna",linkExternalFolderDescription:"Monta una directory host (NAS, USB, condivisione di rete) nel File Manager. I file non vengono copiati — vengono letti direttamente dal percorso originale.",externalFolderNamePlaceholder:"es. Stampe NAS",externalPath:"Percorso host",externalPathHelp:"Percorso assoluto della directory sull'host Docker. Deve essere montato come bind nel container.",readOnly:"Sola lettura",readOnlyHelp:"impedisce caricamenti e cancellazioni",showHiddenFiles:"Mostra file nascosti (file punto)",externalFolder:"Cartella esterna",scanFolder:"Scansiona",toast:{folderCreated:"Cartella creata",folderDeleted:"Cartella eliminata",fileDeleted:"File eliminato",filesDeleted:"Eliminati {{count}} file",filesMoved:"File spostati",folderLinked:"Cartella collegata",folderUnlinked:"Cartella scollegata",externalFolderLinked:"Cartella esterna collegata e scansionata",folderScanned:"Scansione completata: {{added}} aggiunti, {{removed}} rimossi",addedToQueue:"Aggiunti {{count}} file alla coda",addedToQueuePartial:"Aggiunti {{added}} file, {{failed}} falliti",failedToAddToQueue:"Aggiunta file fallita: {{error}}",fileRenamed:"File rinominato",folderRenamed:"Cartella rinominata",thumbnailsGenerated:"Generate {{count}} miniature",thumbnailsGeneratedPartial:"Generate {{succeeded}} miniature, {{failed}} fallite",noStlMissingThumbnails:"Nessun file STL senza miniature",failedToGenerateThumbnails:"Generazione miniature fallita: {{error}}",thumbnailGenerated:"Miniatura generata",failedToGenerateThumbnail:"Generazione miniatura fallita: {{error}}"}},projects:{title:"Progetti",subtitle:"Organizza e traccia i tuoi progetti di stampa 3D",newProject:"Nuovo progetto",editProject:"Modifica progetto",deleteProject:"Elimina progetto",projectName:"Nome progetto",description:"Descrizione",noProjects:"Nessun progetto ancora",noProjectsFiltered:"Nessun progetto {{status}}",noProjectsFilteredHelp:"Non hai progetti {{status}}. I progetti appariranno qui quando il loro stato cambia.",createFirst:"Crea il tuo primo progetto per organizzare stampe correlate, tracciare progressi e gestire i tuoi build.",createFirstButton:"Crea il tuo primo progetto",create:"Crea",files:"File",prints:"Stampe",plates:"piatti",parts:"parti",lastModified:"Ultima modifica",deleteConfirm:"Sei sicuro di voler eliminare questo progetto? Archivi e elementi in coda saranno scollegati ma non eliminati.",addFiles:"Aggiungi file",removeFile:"Rimuovi file",viewDetails:"Vedi dettagli",namePlaceholder:"es., Build Voron 2.4",descriptionPlaceholder:"Descrizione opzionale...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"L'URL deve iniziare con http:// o https://",openExternalUrl:"Apri URL del progetto",coverImageLabel:"Immagine di copertina",coverImageAlt:"Immagine di copertina del progetto",coverImageUpload:"Carica",coverImageReplace:"Sostituisci",coverImageRemove:"Rimuovi",color:"Colore",targetPlates:"Piatti target",targetPlatesPlaceholder:"es., 25",targetPlatesHelp:"Numero di job di stampa",targetParts:"Parti target",targetPartsPlaceholder:"es., 150",targetPartsHelp:"Totale oggetti necessari",tagsLabel:"Tag (separati da virgola)",tagsPlaceholder:"es., voron, funzionale, regalo",dueDate:"Data scadenza",priority:"Priorita",priorityLow:"Bassa",priorityNormal:"Normale",priorityHigh:"Alta",priorityUrgent:"Urgente",statusActive:"Attivo",statusCompleted:"Completato",statusArchived:"Archiviato",done:"Fatto",completed:"completato",failed:"fallito",inQueue:"in coda",noPrintsYet:"Nessuna stampa ancora",printJobs:"Job di stampa (piatti)",partsPrinted:"Parti stampate",failedParts:"Parti fallite",import:"Importa",export:"Esporta",importProject:"Importa progetto",exportAll:"Esporta tutti i progetti",loading:"Caricamento progetti...",noEditPermission:"Non hai il permesso di modificare progetti",noDeletePermission:"Non hai il permesso di eliminare progetti",noCreatePermission:"Non hai il permesso di creare progetti",noImportPermission:"Non hai il permesso di importare progetti",noExportPermission:"Non hai il permesso di esportare progetti",toast:{created:"Progetto creato",updated:"Progetto aggiornato",deleted:"Progetto eliminato",imported:"Progetto importato",multipleImported:"{{count}} progetti importati",importFailed:"Import fallito",exported:"Progetti esportati (solo metadati)"}},projectDetail:{notFound:"Progetto non trovato",backToProjects:"Torna a Progetti",export:"Esporta",exportProject:"Esporta progetto",noExportPermission:"Non hai il permesso di esportare progetti",noEditPermission:"Non hai il permesso di modificare progetti",partOf:"Parte di:",priorityLabel:"Priorita:",noPrints:"Nessuna stampa in questo progetto ancora",status:{active:"Attivo",completed:"Completato",archived:"Archiviato"},priority:{low:"Bassa",normal:"Normale",high:"Alta",urgent:"Urgente"},dueDate:{overdue:"Scaduto",today:"Scade oggi",daysLeft:"{{count}} giorni rimanenti"},progress:{platesProgress:"Avanzamento piatti",partsProgress:"Avanzamento parti",printJobs:"job di stampa",parts:"parti",percentComplete:"{{percent}}% completato",remaining:"{{count}} rimanenti"},stats:{printJobs:"Job di stampa",total:"totale",failed:"{{count}} falliti",partsPrinted:"{{count}} parti stampate",printTime:"Tempo di stampa",filamentUsed:"Filamento usato"},cost:{title:"Tracciamento costi",filamentCost:"Costo filamento",energy:"Energia",totalCost:"Costo totale",total:"Totale",includesBom:"incl. distinta materiali",budget:"Budget",remaining:"Rimanente"},subProjects:{title:"Sotto-progetti ({{count}})"},notes:{title:"Note",noEditPermission:"Non hai il permesso di modificare le note",placeholder:"Aggiungi note su questo progetto...",empty:"Nessuna nota ancora. Clicca Modifica per aggiungere note."},files:{title:"File",linkFolders:"Collega cartelle dal Gestore file",forQuickAccess:"a questo progetto per accesso rapido.",fileCount:"{{count}} file",empty:"Nessuna cartella collegata. Vai a Gestore file e collega una cartella a questo progetto.",noFiles:"Nessun file in questa cartella.",print:"Stampa ora",addToQueue:"Aggiungi alla coda"},bom:{title:"Distinta materiali",acquired:"{{completed}}/{{total}} acquisiti",showAll:"Mostra tutti",hideDone:"Nascondi completati",addPart:"Aggiungi parte",noAddPermission:"Non hai il permesso di aggiungere parti",partNamePlaceholder:"Nome parte (es., viti M3x8)",partName:"Nome parte",qty:"Qta",price:"Prezzo ({{currency}})",sourcingUrlPlaceholder:"URL fornitura (opzionale)",remarksPlaceholder:"Note (opzionale)",deletePart:"Elimina parte",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',noUpdatePermission:"Non hai il permesso di aggiornare parti",noEditPermission:"Non hai il permesso di modificare parti",noDeletePermission:"Non hai il permesso di eliminare parti",totalCost:"Costo totale:",empty:"Nessuna parte nella distinta materiali. Aggiungi hardware, elettronica o altri componenti da reperire."},timeline:{title:"Timeline attivita",empty:"Nessuna attivita ancora."},template:{saveAsTemplate:"Salva come template",noCreatePermission:"Non hai il permesso di creare template"},queue:{title:"Coda",viewAll:"Vedi tutto",printing:"{{count}} in stampa",queued:"{{count}} in coda"},prints:{title:"Stampe ({{count}})"},toast:{projectUpdated:"Progetto aggiornato",partAdded:"Parte aggiunta",partRemoved:"Parte rimossa",exportFailed:"Export fallito",projectExported:"Progetto esportato",templateCreated:"Template creato"}},system:{title:"Informazioni sistema",version:"Versione",uptime:"Tempo attivo",cpuUsage:"Uso CPU",memoryUsage:"Uso memoria",diskUsage:"Uso disco",networkInfo:"Info rete",logs:"Log",debugMode:"Modalita debug",enableDebug:"Abilita log debug",disableDebug:"Disabilita log debug",downloadLogs:"Scarica log",clearLogs:"Cancella log",dockerInfo:"Info Docker",containerName:"Nome container",imageName:"Nome immagine",platform:"Piattaforma",architecture:"Architettura"},library:{title:"Libreria filamenti",addFilament:"Aggiungi filamento",editFilament:"Modifica filamento",deleteFilament:"Elimina filamento",vendor:"Produttore",material:"Materiale",color:"Colore",kFactor:"K Factor",temperature:"Temperatura",noFilaments:"Nessun filamento in libreria",deleteConfirm:"Sei sicuro di voler eliminare questo filamento?",importFromPrinter:"Importa da stampante",exportToFile:"Esporta su file"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Integrazione Spoolman",enabled:"Spoolman abilitato",url:"URL Spoolman",connected:"Connesso",disconnected:"Non connesso",testConnection:"Testa connessione",sync:"Sincronizza",syncing:"Sincronizzazione...",lastSync:"Ultima sincronizzazione",linkToSpoolman:"Collega a Spoolman",openInSpoolman:"Apri in Spoolman",unlinkSpool:"Scollega bobina",unlinkConfirmTitle:"Scollegare bobina?",unlinkConfirmMessage:"Questo disconnetterà lo spool da Spoolman. I dati dello spool in Spoolman rimarranno invariati.",selectSpool:"Seleziona bobina",noUnlinkedSpools:"Nessuna bobina scollegata disponibile",linkSuccess:"Bobina collegata a Spoolman con successo",linkFailed:"Collegamento bobina fallito",unlinkSuccess:"Bobina scollegata da Spoolman con successo",unlinkFailed:"Impossibile scollegare la bobina",spoolId:"ID bobina",fillSourceLabel:"(Spoolman)",weight:"Peso",remaining:"Rimanente",disableWeightSync:"Disabilita sync peso stimato AMS",disableWeightSyncDesc:"Non aggiornare la capacità rimanente dalle stime AMS. Usalo se preferisci il tracciamento di Spoolman rispetto alle stime AMS. Le nuove bobine useranno comunque la stima AMS come peso iniziale.",reportPartialUsage:"Segnala uso parziale per stampe fallite",reportPartialUsageDesc:"Quando una stampa fallisce o viene annullata, segnala il filamento stimato usato fino a quel punto in base all'avanzamento layer."},inventory:{title:"Inventario Bobine",spoolmanMixedContentTitle:"Spoolman non può essere caricato tramite HTTPS — contenuto misto bloccato dal browser",spoolmanMixedContentBody:"Bambuddy viene servito tramite HTTPS (dietro il tuo reverse proxy), ma l'URL di Spoolman è ancora HTTP. I browser bloccano il contenuto misto per motivi di sicurezza, quindi l'interfaccia Spoolman incorporata non può essere visualizzata. Anche Spoolman deve essere raggiungibile via HTTPS.",spoolmanMixedContentFixReverseProxy:"Metti Spoolman dietro lo stesso reverse proxy di Bambuddy (Traefik / Nginx / Caddy) in HTTPS, poi aggiorna l'URL di Spoolman nelle Impostazioni con il nuovo indirizzo HTTPS.",spoolmanMixedContentFixOpenNewTab:"Come alternativa, apri Spoolman in una nuova scheda via HTTP — le regole sul contenuto misto si applicano solo ai frame incorporati, una scheda autonoma funziona.",spoolmanOpenInNewTab:"Apri Spoolman in una nuova scheda",addSpool:"Aggiungi Bobina",editSpool:"Modifica Bobina",material:"Materiale",selectMaterial:"Seleziona materiale...",subtype:"Sottotipo",brand:"Marchio",searchBrand:"Cerca marchio...",useCustomBrand:'Usa "{{brand}}"',useCustomMaterial:"Usa materiale personalizzato: {{material}}",colorName:"Nome Colore",colorNamePlaceholder:"Jade White, Fire Red...",color:"Colore",hexColor:"Colore Hex",pickColor:"Scegli colore personalizzato",labelWeight:"Peso da Etichetta",coreWeight:"Peso Bobina Vuota",searchSpoolWeight:"Cerca peso bobina...",weightUsed:"Utilizzato",currentWeight:"Peso Rimanente",measuredWeight:"Peso Misurato",spoolName:"Bobina",costPerKg:"Costo per kg",measuredWeightError:"Il peso misurato deve essere compreso tra {{min}}g e {{max}}g.",slicerFilament:"Filamento Slicer",slicerFilamentName:"Nome Preset Slicer",slicerPreset:"Preset Slicer",searchPresets:"Cerca preset filamento...",selectedPreset:"Selezionato",noPresetsFound:"Nessun preset trovato",tempOverrides:"Override Temperatura",note:"Nota",notePlaceholder:"Eventuali note aggiuntive su questa bobina...",category:"Categoria",categoryPlaceholder:"es. Produzione, Prototipo, Cliente A",categoryNone:"Senza categoria",lowStockThresholdOverride:"Soglia scorte basse (questa bobina)",lowStockThresholdOverrideHelp:"Lascia vuoto per usare la soglia globale ({{global}}%).",clearRfid:"Cancella tag RFID",rfidCleared:"Tag RFID cancellato",archive:"Archivia",restore:"Ripristina",noSpools:"Ancora nessuna bobina. Aggiungi la tua prima bobina per iniziare.",noAvailableSpools:"Nessuna bobina disponibile. Aggiungi una bobina al tuo inventario o rimuovine l'assegnazione da un altro slot.",kProfiles:"K-Profiles",addKProfile:"Aggiungi K-Profile",assignSpool:"Assegna Bobina",unassignSpool:"Scollega",assignSuccess:"Bobina assegnata e slot AMS configurato",assignFailed:"Assegnazione bobina fallita",selectSpool:"Seleziona una bobina da assegnare a questo slot",assigned:"Assegnato",assigning:"Assegnazione...",searchSpools:"Cerca bobine...",showAllSpools:"Mostra tutte le bobine",allMaterials:"Tutti i Materiali",filterByBrand:"Filtra per marchio...",showArchived:"Mostra archiviate",quickAdd:"Aggiunta rapida (Scorta)",quantity:"Quantità",stock:"Scorta",configured:"Configurata",spoolsCreated:"{{count}} bobine create",spoolCreated:"Bobina creata",spoolUpdated:"Bobina aggiornata",spoolDeleted:"Bobina eliminata",spoolArchived:"Bobina archiviata",spoolRestored:"Bobina ripristinata",deleteConfirm:"Sei sicuro di voler eliminare questa bobina? Questa azione non può essere annullata.",archiveConfirm:"Sei sicuro di voler archiviare questa bobina?",advancedSettings:"Impostazioni Avanzate",filamentInfoTab:"Info filamento",paProfileTab:"Profilo PA",filamentInfo:"Filamento",additional:"Aggiuntivo",loadingPresets:"Caricamento preset cloud...",cloudConnected:"Cloud connesso",cloudNotConnected:"Cloud non connesso (valori predefiniti)",recentColors:"Recenti",searchColors:"Cerca colori...",searchResults:"Risultati della ricerca",allColors:"Tutti i colori",commonColors:"Colori comuni",showLess:"Mostra meno",showAll:"Mostra tutto",noColorsFound:"Nessun colore corrisponde alla ricerca",noResults:"Nessun risultato trovato",extraColorsLabel:"Extra colours",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.",extraColorsInvalid:"Ignored invalid hex: {{tokens}}",colorEffectLabel:"Effect",colorEffect:{none:"None",sparkle:"Sparkle",wood:"Wood",marble:"Marble",glow:"Glow",matte:"Matte",silk:"Silk",galaxy:"Galaxy",rainbow:"Rainbow",metal:"Metal",translucent:"Translucent",gradient:"Gradient",dualColor:"Dual Color",triColor:"Tri Color",multicolor:"Multicolor"},selectMaterialFirst:"Selezionare prima un materiale nella scheda Info filamento.",noPrintersConfigured:"Nessuna stampante configurata. Aggiungi stampanti per usare i profili PA.",matchingFilter:"Corrispondenti",anyBrand:"Qualsiasi marca",anyVariant:"Qualsiasi variante",autoSelect:"Selezione automatica",matches:"corrispondenze",match:"corrispondenza",noMatches:"Nessuna corrispondenza",connected:"Connessa",offline:"Offline",printerOffline:"La stampante è offline. Connetti per visualizzare i profili di calibrazione.",noKProfilesMatch:"Nessun profilo K corrisponde al filamento selezionato.",leftNozzle:"Ugello sinistro",rightNozzle:"Ugello destro",profilesSelected:"profili di calibrazione selezionati",totalInventory:"Inventario totale",totalConsumed:"Totale consumato",byMaterial:"Per materiale",inPrinter:"In stampante",lowStock:"Scorta bassa",sinceTracking:"Dall'inizio del tracciamento",loadedInAms:"Caricato in AMS/Est",remaining:"Rimanente",weightCheck:"Controllo Peso",lastWeighed:"Ultima pesatura",neverWeighed:"Mai pesato",search:"Cerca bobine...",showing:"Visualizzazione",to:"a",of:"di",show:"Mostra",spools:"bobine",spool:"bobina",page:"Pagina",noSpoolsMatch:"Nessun risultato trovato",noSpoolsMatchDesc:"Prova a modificare la ricerca o i filtri per trovare quello che cerchi.",active:"Attive",archived:"Archiviate",all:"Tutte",used:"Usato",new:"Nuovo",clearFilters:"Cancella filtri",table:"Tabella",cards:"Schede",net:"Netto",groupSimilar:"Raggruppa",groupedSpools:"{{count}} bobine identiche",groupedRows:"righe",columns:"Colonne",configureColumns:"Configura colonne",configureColumnsDesc:"Trascina per riordinare le colonne o usa le frecce. Attiva/disattiva la visibilità con l'icona dell'occhio.",visible:"visibili",reset:"Ripristina",cancel:"Annulla",applyChanges:"Applica modifiche",moveUp:"Sposta su",moveDown:"Sposta giù",hideColumn:"Nascondi colonna",showColumn:"Mostra colonna",linkToSpool:"Collega a bobina",tagLinked:"Tag collegato alla bobina",tagLinkFailed:"Impossibile collegare il tag",tagAlreadyLinked:"Tag già collegato a un'altra bobina",unknownTag:"Tag RFID sconosciuto rilevato",usageHistory:"Cronologia utilizzo",noUsageHistory:"Nessun utilizzo registrato",printName:"Nome stampa",weightConsumed:"Peso consumato",clearHistory:"Cancella",historyCleared:"Cronologia utilizzo cancellata",fillSourceLabel:"(Inv)",lowStockThresholdError:"La soglia deve essere tra 0.1 e 99.9",assignMismatchTitle:"Materiale non corrispondente",assignMismatchMessage:'Il materiale della bobina selezionata "{{spoolMaterial}}" non corrisponde al materiale del vassoio "{{trayMaterial}}" per {{location}}. Assegnare comunque?',assignMismatchConfirm:"Assegna comunque",assignPartialMismatchMessage:'Il materiale della bobina "{{spoolMaterial}}" è simile ma non corrisponde esattamente a "{{trayMaterial}}" in {{location}}. Vuoi procedere?',assignProfileMismatchMessage:'Il profilo della bobina "{{spoolProfile}}" non corrisponde al profilo del vassoio "{{trayProfile}}" in {{location}}. Vuoi procedere?'},timelapse:{title:"Timelapse",create:"Crea timelapse",download:"Scarica",delete:"Elimina",preview:"Anteprima",frameRate:"Frame rate",quality:"Qualità",processing:"Elaborazione...",noTimelapses:"Nessun timelapse disponibile"},ams:{title:"AMS",slot:"Slot",empty:"Vuoto",emptySlot:"Slot vuoto",unknown:"Sconosciuto",humidity:"Umidità",temperature:"Temperatura",filamentType:"Tipo filamento",filamentColor:"Colore",remaining:"Rimanente",history:"Cronologia AMS",noHistory:"Nessuna cronologia disponibile",configureSlot:"Configura slot",externalSpool:"Bobina esterna",profile:"Profilo",kFactor:"K Factor",fill:"Livello",configure:"Configura",used:"utilizzato",remainingUnit:"rimanente"},printModal:{title:"Avvia stampa",selectPrinter:"Seleziona stampante",selectPlate:"Seleziona piatto",filamentMapping:"Mappatura filamento",totalCost:"Costo totale:",slotRemainingShort:" - {{grams}}g rim.",printSettings:"Impostazioni stampa",bedLeveling:"Livellamento piatto",flowCalibration:"Calibrazione flusso",vibrationCalibration:"Calibrazione vibrazioni",layerInspection:"Ispezione primo layer",timelapse:"Timelapse",startPrint:"Avvia stampa",addToQueue:"Aggiungi alla coda",cancel:"Annulla",noPrintersAvailable:"Nessuna stampante disponibile",printerBusy:"Stampante occupata",printerOffline:"Stampante offline",sameTypeDifferentColor:"Stesso tipo, colore diverso",filamentTypeNotLoaded:"Tipo di filamento non caricato",openCalendar:"Apri calendario",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Ugello sinistro",rightNozzleTooltip:"Ugello destro",filamentOverride:"Sostituzione filamento",filamentOverrideHint:"Sostituisci opzionalmente i filamenti per l'assegnazione basata sul modello. Lo scheduler abbinerà i filamenti selezionati invece dei valori 3MF originali.",originalFilament:"Originale",overrideWith:"Sostituisci con",resetToOriginal:"Ripristina originale",insufficientFilamentTitle:"Filamento insufficiente",insufficientFilamentMessage:"Alcune bobine assegnate hanno meno filamento rimanente di quanto necessario per questa stampa:",insufficientFilamentLine:"{{printer}} - {{slot}}: necessita di {{required}}g, rimanenti {{remaining}}g",printAnyway:"Stampa comunque",forceColorMatch:"Forza corrispondenza colore",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Scagliona a {{count}} stampanti",gcodeInjection:"Inietta G-code auto-stampa"},backup:{title:"Backup e ripristino",createBackup:"Crea backup",restoreBackup:"Ripristina backup",restoreDescription:"Sostituisci tutti i dati da un file di backup",downloadBackup:"Scarica backup",uploadBackup:"Carica backup",lastBackup:"Ultimo backup",autoBackup:"Backup automatico",backupNow:"Esegui backup ora",restoreWarning:"Avviso: il ripristino sovrascriverà tutti i dati attuali.",includeArchives:"Includi archivi",includeSettings:"Includi impostazioni",includeProfiles:"Includi profili",backupSuccess:"Backup creato con successo",restoreSuccess:"Backup ripristinato con successo",backupFailed:"Backup fallito",restoreFailed:"Ripristino fallito",restoreNote:"La stampante virtuale verrà fermata durante il ripristino",githubBackup:"Backup GitHub",enabled:"Abilitato",cloudLoginRequired:"Accesso Bambu Cloud richiesto. Accedi in Profili → Profili Cloud per abilitare il backup GitHub.",cloudLoginRequiredShort:"Accesso Cloud richiesto",githubDescription:"Sincronizza automaticamente i tuoi profili con un repository GitHub privato per backup e cronologia delle versioni.",repositoryUrl:"URL del repository",personalAccessToken:"Token di accesso personale",tokenSaved:"(salvato)",enterNewToken:"Inserisci un nuovo token per aggiornare",tokenHint:"Token a grana fine con permesso di lettura/scrittura dei contenuti",branch:"Branch",manualOnly:"Solo manuale",hourly:"Ogni ora",daily:"Giornaliero",weekly:"Settimanale",includeInBackup:"Includi nel backup",kProfiles:"K-Profili",kProfilesDescription:"Calibrazione dell'avanzamento pressione dalle stampanti connesse",noPrintersConnected:"Nessuna stampante connessa",printersConnected:"{{connected}}/{{total}} connesse",cloudProfiles:"Profili Cloud",cloudProfilesDescription:"Preset di filamento, stampante e processo da Bambu Cloud",appSettings:"Impostazioni App",appSettingsDescription:"Configurazione Bambuddy (database completo)",spoolInventory:"Inventario bobine",spoolInventoryDescription:"Bobine di filamento, cronologia utilizzo e tracciamento costi",printArchives:"Archivi di stampa",printArchivesDescription:"Metadati della cronologia di stampa (nessun file gcode/3MF)",lastBackupAt:"Ultimo backup:",noBackupsYet:"Nessun backup ancora",next:"Prossimo:",startingBackup:"Avvio del backup...",test:"Test",enableBackup:"Abilita backup",testConnection:"Testa connessione",enterRepoUrl:"Inserisci l'URL del repository",enterRepoAndToken:"Inserisci l'URL del repository e il token di accesso",repoRequired:"L'URL del repository è obbligatorio",tokenRequired:"Il token di accesso è obbligatorio",githubBackupEnabled:"Backup GitHub abilitato",tokenUpdated:"Token aggiornato",settingsSaved:"Impostazioni salvate",failedToSave:"Salvataggio fallito: {{message}}",backupCompleteFiles:"Backup completato - {{count}} file aggiornati",backupSkippedNoChanges:"Backup saltato - nessuna modifica",backupFailed2:"Backup fallito: {{message}}",clearedLogs:"{{count}} log eliminati",failedToClearLogs:"Eliminazione log fallita: {{message}}",history:"Cronologia",clear:"Cancella",date:"Data",status:"Stato",commit:"Commit",localBackup:"Backup locale",localBackupDescription:"Crea un backup completo dei tuoi dati Bambuddy includendo database, archivi, upload e tutti i file.",downloadBackupLabel:"Scarica backup",completeBackupZip:"Backup completo: database + tutti i file (ZIP)",download:"Scarica",preparingBackup:"Preparazione del backup...",creatingArchive:"Creazione dell'archivio di backup... Potrebbe richiedere del tempo per archivi di grandi dimensioni.",downloadingFile:"Download del file di backup...",backupDownloaded:"Backup scaricato con successo",failedToCreateBackup:"Creazione del backup fallita: {{message}}",restore:"Ripristina",restoreReplacesAll:"Il ripristino sostituisce tutti i dati.",restoreReplacesAllDetail:"Il database e i file attuali verranno completamente sostituiti. È necessario un riavvio dopo il ripristino.",restoreConfirmTitle:"Ripristina backup",restoreConfirmMessage:`Sei sicuro di voler ripristinare da "{{filename}}"? Questo sostituirà completamente il tuo database e tutti i file. L'applicazione dovrà essere riavviata dopo il ripristino.`,restoreConfirmButton:"Ripristina backup",uploadingFile:"Caricamento del file di backup...",backupRestoredRestart:"Backup ripristinato. Riavvia Bambuddy.",failedToRestore:"Ripristino del backup fallito. Controlla il formato del file.",reloadNow:"Ricarica ora",creatingBackup:"Creazione del backup",restoringBackup:"Ripristino del backup",preparing:"Preparazione...",processing:"Elaborazione...",doNotClosePage:"Non chiudere questa pagina e non navigare altrove. Questa operazione potrebbe richiedere diversi minuti per backup di grandi dimensioni.",restoring:"Ripristino in corso...",restoreComplete:"Ripristino completato",restoreFailed2:"Ripristino fallito",importSettings:"Importa impostazioni da un file di backup",pleaseWaitRestoring:"Attendere durante il ripristino dei dati",selectBackupFile:"Clicca per selezionare un file di backup (.json o .zip)",duplicateHandling:"Come funziona la gestione dei duplicati:",matchPrinters:"Stampanti",matchPrintersBy:"corrispondenza per numero di serie",matchSmartPlugs:"Smart Plug",matchSmartPlugsBy:"corrispondenza per indirizzo IP",matchNotificationProviders:"Provider di notifica",matchNotificationProvidersBy:"corrispondenza per nome",matchFilaments:"Filamenti",matchFilamentsBy:"corrispondenza per nome + tipo + marca",matchArchives:"Archivi",matchArchivesBy:"corrispondenza per hash del contenuto (sempre saltato)",matchPendingUploads:"Upload in sospeso",matchPendingUploadsBy:"corrispondenza per nome file",matchSettingsTemplates:"Impostazioni e modelli",matchSettingsTemplatesBy:"sempre sovrascritti",replaceExisting:"Sostituisci dati esistenti",keepExisting:"Mantieni dati esistenti",overwriteDescription:"Sovrascrivi gli elementi già esistenti con i dati del backup",keepDescription:"Ripristina solo gli elementi che non esistono ancora",overwriteCaution:"Attenzione:",overwriteWarning:"La sovrascrittura sostituirà le configurazioni attuali con i dati del backup. I codici di accesso delle stampanti non vengono mai sovrascritti per sicurezza.",cancel:"Annulla",processingBackup:"Elaborazione del file di backup...",itemsRestored:"Elementi ripristinati",itemsSkipped:"Elementi saltati",restored:"Ripristinati",skippedAlreadyExist:"Saltati (già esistenti)",filesCategory:"File (3MF, miniature, ecc.)",andMore:"...e altri {{count}}",newApiKeysGenerated:"Nuove chiavi API generate",keysShownOnce:"Queste chiavi vengono mostrate solo una volta. Copiale ora!",copy:"Copia",noDataFound:"Nessun dato da ripristinare trovato nel file di backup.",close:"Chiudi",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Impostazioni",notification_providers:"Provider di notifica",notification_templates:"Modelli di notifica",smart_plugs:"Smart Plug",printers:"Stampanti",filaments:"Filamenti",maintenance_types:"Tipi di manutenzione",archives:"Archivi",projects:"Progetti",pending_uploads:"Upload in sospeso",external_links:"Link esterni",api_keys:"Chiavi API"}},tags:{title:"Tag",addTag:"Aggiungi tag",editTag:"Modifica tag",deleteTag:"Elimina tag",tagName:"Nome tag",tagColor:"Colore tag",noTags:"Nessun tag",deleteConfirm:"Sei sicuro di voler eliminare questo tag?",manageTags:"Gestisci tag"},uploadModal:{title:"Carica file 3MF",dragDrop:"Trascina e rilascia file .3mf qui",or:"o",browseFiles:"Sfoglia file",extractionInfo:"Il modello stampante sarà estratto automaticamente dai metadati del file 3MF.",uploaded:"caricati",failed:"falliti",uploading:"Caricamento...",upload:"Carica",uploadFailed:"Caricamento fallito"},editArchive:{title:"Modifica archivio",name:"Nome",namePlaceholder:"Nome stampa",printer:"Stampante",noPrinter:"Nessuna stampante",project:"Progetto",noProject:"Nessun progetto",itemsPrinted:"Elementi stampati",itemsPrintedHelp:"Numero di elementi prodotti in questo job di stampa",notes:"Note",notesPlaceholder:"Aggiungi note su questa stampa...",externalLink:"Link esterno",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link a Printables, Thingiverse o altra fonte",tags:"Tag",tagsPlaceholder:"Aggiungi tag...",addMoreTags:"Aggiungi altri tag...",matchingTags:'Tag corrispondenti "{{query}}"',existingTags:"Tag esistenti",clickToAdd:"(clicca per aggiungere)",status:"Stato",failureReason:"Motivo fallimento",selectReason:"Seleziona motivo...",photos:"Foto del risultato stampato",photosHelp:"Clicca + per aggiungere foto del risultato stampato",printResult:"Risultato stampa",saving:"Salvataggio...",failureReasons:{adhesionFailure:"Fallimento adesione",spaghettiDetached:"Spaghetti / staccato",layerShift:"Spostamento layer",cloggedNozzle:"Ugello intasato",filamentRunout:"Filamento esaurito",warping:"Warping",stringing:"Stringing",underExtrusion:"Sotto-estrusione",powerFailure:"Mancanza corrente",userCancelled:"Annullato dall'utente",other:"Altro"},statuses:{completed:"Completato",failed:"Fallito",aborted:"Annullato",printing:"In stampa"}},kProfiles:{title:"K-Profiles",noPrintersConfigured:"Nessuna stampante configurata",addPrinterInSettings:"Aggiungi una stampante in Impostazioni per gestire i K-profiles",noActivePrinters:"Nessuna stampante attiva",enablePrinterConnection:"Abilita una connessione stampante per vedere i K-profiles",loadingProfiles:"Caricamento K-Profiles...",printerOffline:"Stampante offline",printerOfflineDesc:"La stampante selezionata non e connessa. Accendila per vedere i K-profiles.",noMatchingProfiles:"Nessun profilo corrispondente",noMatchingProfilesDesc:"Nessun profilo corrisponde ai criteri di ricerca",noKProfiles:"Nessun K-Profile",noKProfilesDesc:"Nessun profilo pressure advance per ugello da {{diameter}}mm",createFirstProfile:"Crea primo profilo",printer:"Stampante",nozzle:"Ugello",refresh:"Aggiorna",addProfile:"Aggiungi profilo",export:"Esporta",import:"Importa",select:"Seleziona",selectAll:"Seleziona tutto",delete:"Elimina",searchPlaceholder:"Cerca per nome o filamento...",allExtruders:"Tutti gli estrusori",leftOnly:"Solo sinistro",rightOnly:"Solo destro",allFlow:"Tutto flow",hfOnly:"Solo HF",sOnly:"Solo S",sortName:"Ordina: Nome",sortKValue:"Ordina: K-Value",sortFilament:"Ordina: Filamento",leftExtruder:"Estrusore sinistro",rightExtruder:"Estrusore destro",modal:{addTitle:"Aggiungi K-Profile",editTitle:"Modifica K-Profile",profileName:"Nome profilo",profileNamePlaceholder:"Il mio profilo PLA",kValue:"K-Value",kValuePlaceholder:"0.020",kValueHelp:"Intervallo tipico: 0.01 - 0.06 per PLA, 0.02 - 0.10 per PETG",filament:"Filamento",selectFilament:"Seleziona filamento...",noFilamentsHelp:"Nessun filamento trovato. Crea prima un K-profile in Bambu Studio.",flowType:"Tipo flow",highFlow:"High Flow",standard:"Standard",nozzleSize:"Dimensione ugello",extruder:"Estrusore",extruders:"Estrusori",left:"Sinistra",right:"Destra",notes:"Note (salvate localmente)",notesPlaceholder:"Aggiungi note su questo profilo...",notesHelp:"Le note sono salvate in Bambuddy, non sulla stampante",syncing:"Sincronizzazione con stampante...",savingExtruder:"Salvataggio su estrusore {{current}}/{{total}}...",pleaseWait:"Attendere"},deleteConfirm:{title:"Elimina profilo",cannotUndo:"Questo non può essere annullato",message:'Sei sicuro di voler eliminare "{{name}}" dalla stampante?'},bulkDelete:{title:"Elimina profili",cannotUndo:"Questo non può essere annullato",message:"Sei sicuro di voler eliminare {{count}} profili selezionati dalla stampante?"},toast:{profileSaved:"K-profile salvato",profilesSaved:"K-profile salvato su {{count}} estrusori",selectAtLeastOneExtruder:"Seleziona almeno un estrusore",profileDeleted:"K-profile eliminato",profilesDeleted:"Eliminati {{count}} profili",exportedProfiles:"Esportati {{count}} profili",importedProfiles:"Importati {{count}} di {{total}} profili",noProfilesToExport:"Nessun profilo da esportare",invalidFileFormat:"Formato file non valido",failedToParseImport:"Parsing file import fallito",failedToSaveBatch:"Salvataggio K-profiles fallito",noteSaved:"Nota salvata",failedToSaveNote:"Salvataggio nota fallito"},permission:{noRead:"Non hai il permesso di aggiornare i profili",noCreate:"Non hai il permesso di aggiungere profili",noUpdate:"Non hai il permesso di aggiornare K-profiles",noDelete:"Non hai il permesso di eliminare K-profiles",noExport:"Non hai il permesso di esportare profili",noImport:"Non hai il permesso di importare profili"}},virtualPrinter:{title:"Stampante virtuale",running:"In esecuzione",stopped:"Ferma",description:{default:"Abilita una stampante virtuale che appare in Bambu Studio e OrcaSlicer. I file inviati a questa stampante saranno archiviati senza stampare.",proxy:"Abilita un proxy che inoltra il traffico slicer a una stampante reale, permettendo la stampa remota su qualsiasi rete."},enable:{title:"Abilita stampante virtuale",visibleInSlicer:'Visibile come "Bambuddy" nella ricerca slicer',proxyingTo:"In proxy verso {{name}}",notActive:"Non attivo"},model:{title:"Modello stampante",description:"Seleziona il modello stampante da emulare.",restartWarning:"Cambiare il modello riavviera la stampante virtuale"},accessCode:{title:"Codice accesso",isSet:"Codice accesso impostato",notSet:"Nessun codice accesso impostato - richiesto per abilitare",placeholder:"Inserisci codice 8 caratteri",placeholderChange:"Inserisci nuovo codice per cambiare",hint:"Deve essere esattamente 8 caratteri. Usato dagli slicer per autenticarsi.",charCount:"({{count}}/8)"},targetPrinter:{title:"Stampante target",configured:"Target proxy configurato",notConfigured:"Nessuna stampante target selezionata - richiesta per modalita proxy",placeholder:"Seleziona una stampante...",hint:"Seleziona la stampante a cui fare proxy. La stampante deve essere in modalita LAN.",noPrinters:"Nessuna stampante configurata. Aggiungi una stampante per usare la modalita proxy."},remoteInterface:{title:"Sovrascrittura interfaccia di rete",configured:"Sovrascrittura interfaccia attiva",optional:"Opzionale - usare se l'IP rilevato automaticamente e sbagliato (es. piu NIC, Docker, VPN)",placeholder:"Rilevamento automatico (predefinito)...",hint:"Sovrascrive l'indirizzo IP pubblicizzato via SSDP e usato nel certificato TLS. Utile quando Bambuddy ha piu interfacce di rete."},mode:{title:"Modalita",archive:"Archivio",archiveDesc:"Archivia subito i file",review:"Revisione",reviewDesc:"Rivedi prima di archiviare",queue:"Coda",queueDesc:"Archivia e aggiungi alla coda",proxy:"Proxy",proxyDesc:"Inoltra a stampante reale"},autoDispatch:{title:"Avvio automatico",description:"Avvia automaticamente le stampe aggiunte alla coda. Se disattivato, le stampe attendono l'avvio manuale."},tailscaleDisabled:{title:"Integrazione Tailscale",description:"Quando abilitato, utilizza Tailscale per certificati TLS affidabili. Disabilita per utilizzare solo certificati auto-firmati."},setupRequired:{title:"Configurazione necessaria",description:"La stampante virtuale richiede configurazioni di sistema aggiuntive prima di funzionare. Include port forwarding, regole firewall e impostazioni specifiche della piattaforma.",readGuide:"Leggi la guida prima di abilitare"},howItWorks:{title:"Come funziona",step1:"Sulla stessa LAN, le stampanti virtuali appaiono automaticamente nel tuo slicer (Bambu Studio / OrcaSlicer). Da altre reti, aggiungile manualmente tramite indirizzo IP e codice di accesso.",step2:'In modalità Archivio, Revisione e Coda, usa il pulsante "Invia" nel tuo slicer per caricare file 3MF su Bambuddy. Lo slicer mostrerà "Stampa riuscita" — il file viene salvato, non stampato.',step3:"In modalità Proxy, la stampante virtuale inoltra tutto il traffico a una stampante reale — le stampe partono immediatamente come con una connessione diretta."},status:{title:"Dettagli stato",printerName:"Nome stampante",model:"Modello",serialNumber:"Numero seriale",mode:"Modalita",pendingFiles:"File in sospeso",targetPrinter:"Stampante target",ftpPort:"Porta FTP",mqttPort:"Porta MQTT",ftpConnections:"Connessioni FTP",mqttConnections:"Connessioni MQTT"},toast:{updated:"Impostazioni stampante virtuale aggiornate",failedToUpdate:"Aggiornamento impostazioni fallito",tailscaleNotAvailable:"Tailscale non è installato su questo host. Installa prima Tailscale, poi riprova.",copyFailed:"Copia non riuscita — seleziona il testo manualmente",accessCodeRequired:"Imposta prima un codice accesso",targetPrinterRequired:"Seleziona prima una stampante target",bindIpRequired:"Impostare prima un indirizzo IP",accessCodeEmpty:"Il codice accesso non può essere vuoto",accessCodeLength:"Il codice accesso deve essere esattamente 8 caratteri",created:"Stampante virtuale creata",failedToCreate:"Impossibile creare la stampante virtuale",deleted:"Stampante virtuale eliminata",failedToDelete:"Impossibile eliminare la stampante virtuale"},list:{title:"Stampanti virtuali",add:"Aggiungi",addFirst:"Aggiungi stampante virtuale",empty:"Nessuna stampante virtuale configurata. Aggiungine una per iniziare."},bindIp:{title:"Interfaccia di rete",placeholder:"Seleziona interfaccia...",hint:"Interfaccia di rete a cui questa stampante virtuale si collega. Deve essere unica per stampante."},proxy:{accessCodeHint:"In modalita proxy, usa il codice di accesso della stampante di destinazione nello slicer. La connessione viene inoltrata in modo trasparente alla stampante reale."},addDialog:{title:"Aggiungi stampante virtuale",name:"Nome",hint:"Potrai configurare il codice di accesso, la stampante di destinazione e altre impostazioni dopo la creazione.",create:"Crea"},deleteConfirm:{title:"Elimina stampante virtuale",message:'Sei sicuro di voler eliminare "{{name}}"? Tutti i servizi di questa stampante verranno interrotti.'},archiveNameSource:{title:"Origine nome archivio",description:'Scegli come vengono nominati i nuovi archivi quando i file arrivano tramite la stampante virtuale. "Metadati" utilizza il titolo incorporato nello slicer dal 3MF (default). "Nome file" utilizza il nome che Bambu Studio ha inviato via FTP — utile se hai rinominato il job nella finestra "invia a stampante".',metadata:"Metadati",filename:"Nome file"}},modelViewer:{openInSlicer:"Apri nello slicer",tabs:{model:"Modello 3D",gcode:"Anteprima G-code"},notAvailable:"non disponibile",notSliced:"non sezionato",plates:"Piatti",allPlates:"Tutti i piatti",plateNumber:"Piatto {{number}}",plateCount:"{{count}} piatto",plateCount_other:"{{count}} piatti",objectCount:"{{count}} oggetto",objectCount_other:"{{count}} oggetti",filamentCount:"{{count}} filamento",filamentCount_other:"{{count}} filamenti",eta:"ETA {{minutes}} min",noPreview:"Nessuna anteprima disponibile per questo file",pagination:{pageOf:"Pagina {{current}} di {{total}}",prev:"Prec",next:"Succ"},errors:{failedToLoad:"Caricamento file fallito",noMeshes:"Nessuna mesh trovata nel file 3MF",unsupportedFormat:"Formato file non supportato"}},maintenanceDescriptions:{lubricateCarbonRods:"Applica lubrificante alle aste in carbonio per un movimento fluido",lubricateRails:"Applica lubrificante alle guide lineari per un movimento fluido",cleanNozzle:"Pulisci hotend e ugello per prevenire intasamenti",checkBelts:"Verifica tensione cinghie per stampe accurate",cleanBuildPlate:"Pulisci il piatto per migliorare l'adesione",checkExtruder:"Ispeziona ingranaggi estrusore per usura",checkCooling:"Assicurati che le ventole di raffreddamento funzionino",generalInspection:"Ispezione generale stampante",cleanCarbonRods:"Pulisci le aste in carbonio per ridurre attrito",lubricateSteelRods:"Applica lubrificante alle aste in acciaio per un movimento fluido",cleanSteelRods:"Pulisci le aste in acciaio per ridurre attrito",cleanLinearRails:"Pulisci le guide lineari per rimuovere polvere e detriti",checkPtfeTube:"Ispeziona il tubo PTFE per usura o danni",replaceHepaFilter:"Sostituisci filtro HEPA per qualità aria",replaceCarbonFilter:"Sostituisci filtro a carbone attivo",lubricateLeftNozzleRail:"Lubrifica guida ugello sinistro (serie H2)"},smartPlugs:{offline:"Offline",admin:"Amministrazione",openPlugAdminPage:"Apri pagina amministrazione presa",deleteSmartPlug:"Elimina presa smart",turnOnSmartPlug:"Accendi presa smart",turnOffSmartPlug:"Spegni presa smart",turnOn:"Accendi",turnOff:"Spegni",addSmartPlug:{scanningNetwork:"Scansione rete...",chooseEntity:"Scegli un'entità...",connectionFailed:"Connessione fallita",searchEntities:"Cerca entità...",searchPowerSensors:"Cerca sensori di potenza...",searchEnergySensors:"Cerca sensori di energia...",placeholders:{plugName:"Presa soggiorno",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Stesso del topic potenza, o diverso"}},linkedTo:"Collegato a:",monitorOnly:"Solo monitoraggio",alerts:"Avvisi",scheduleOn:"On {{time}}",scheduleOff:"Off {{time}}",on:"On",off:"Off",power:"Potenza",kwhToday:"kWh Oggi",settings:"Impostazioni",automationSettings:"Impostazioni automazione",showInSwitchbar:"Mostra nella barra interruttori",quickAccessSidebar:"Accesso rapido dalla barra laterale",enabled:"Abilitato",enableAutomation:"Abilita automazione per questa presa",autoOn:"Auto On",autoOnDescription:"Accendi quando inizia la stampa",autoOff:"Auto Off",autoOffDescription:"Spegni quando la stampa è completata (una tantum)",autoOffPersistent:"Mantieni attivo",autoOffPersistentDescription:"Resta attivo tra le stampe invece di una tantum",turnOffDelayMode:"Modalità ritardo spegnimento",time:"Tempo",temp:"Temp",delayMinutes:"Ritardo (minuti)",tempThreshold:"Soglia temperatura (°C)",tempThresholdDescription:"Si spegne quando l'ugello si raffredda sotto questa temperatura",edit:"Modifica",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"? Questa azione non può essere annullata.',turnOnConfirm:'Sei sicuro di voler accendere "{{name}}"?',turnOffConfirm:`Sei sicuro di voler spegnere "{{name}}"? Questo interromperà l'alimentazione del dispositivo collegato.`,failedToTurn:'Impossibile {{action}} "{{name}}"',unknown:"Sconosciuto",addTitle:"Aggiungi presa smart",editTitle:"Modifica presa smart",stopScanning:"Interrompi scansione",discoverTasmota:"Scopri dispositivi Tasmota",foundDevices:"{{count}} dispositivo/i trovato/i - clicca per selezionare:",noDevicesFound:"Nessun dispositivo Tasmota trovato nella rete",haNotConfigured:"Home Assistant non è configurato. Configuralo in",haSettingsPath:"Impostazioni → Rete → Home Assistant",selectEntity:"Seleziona entità *",ipAddress:"Indirizzo IP *",nameLabel:"Nome *",username:"Nome utente",password:"Password",authHint:"Lascia vuoto se il tuo dispositivo Tasmota non richiede autenticazione",linkToPrinter:"Collega alla stampante",noPrinter:"Nessuna stampante (solo controllo manuale)",linkingDescription:"Il collegamento abilita accensione/spegnimento automatico all'inizio/fine stampa",powerAlerts:"Avvisi potenza",alertAbove:"Avviso se sopra (W)",alertBelow:"Avviso se sotto (W)",alertDescription:"Ricevi notifiche quando il consumo supera queste soglie. Lascia vuoto per disabilitare quella direzione.",dailySchedule:"Programma giornaliero",turnOnAt:"Accendi alle",turnOffAt:"Spegni alle",scheduleDescription:"Accendi/spegni automaticamente la presa a questi orari ogni giorno. Lascia vuoto per saltare quell'azione.",showOnPrinterCard:"Mostra sulla scheda stampante",displayOnPrinterCard:"Mostra pulsante sulla scheda stampante",connectedResult:"Connesso!",deviceLabel:"Dispositivo: {{name}} - ",stateLabel:"Stato: {{state}}",test:"Test",delete:"Elimina",save:"Salva",add:"Aggiungi",cancel:"Annulla",failedToStartScan:"Impossibile avviare la scansione",nameRequired:"Il nome è obbligatorio",entityRequired:"L'entità è obbligatoria per le prese Home Assistant",mqttTopicRequired:"Almeno un topic MQTT deve essere configurato per potenza, energia o monitoraggio stato",loadingEntities:"Caricamento entità...",loading:"Caricamento...",failedToLoadEntities:"Impossibile caricare le entità: {{error}}",noEntitiesMatching:'Nessuna entità trovata corrispondente a "{{search}}"',noEntitiesAvailable:"Nessuna entità disponibile",searchingEntities:"Ricerca in tutte le entità ({{count}} trovate)",showingEntities:"Mostrando switch, light, input_boolean ({{count}} disponibili)",energyMonitoringOptional:"Monitoraggio energia (Opzionale)",energyMonitoringHint:"Cerca e seleziona i sensori che forniscono dati di potenza/energia.",powerSensorW:"Sensore potenza (W)",energyTodayKwh:"Energia oggi (kWh)",totalEnergyKwh:"Energia totale (kWh)",noMatchingSensors:"Nessun sensore corrispondente",none:"Nessuno",mqttNotConfigured:"Broker MQTT non configurato. Imposta l'indirizzo del broker in",mqttSettingsPath:"Impostazioni → Rete → Pubblicazione MQTT",mqttNotConfiguredSuffix:"(non è necessario abilitare la pubblicazione, basta inserire i dettagli del broker).",mqttMonitorOnlyDescription:"Le prese MQTT ricevono dati di potenza/energia tramite sottoscrizione MQTT. Il controllo on/off non è disponibile - usa il tuo broker MQTT o sistema domotico.",powerMonitoring:"Monitoraggio potenza",energyMonitoring:"Monitoraggio energia",stateMonitoring:"Monitoraggio stato",optional:"opzionale",topic:"Topic",jsonPath:"Percorso JSON",multiplier:"Moltiplicatore",onValue:"Valore ON",mqttPowerHint:`Il percorso JSON estrae il valore dal payload JSON (es. "power_l1"). Lascia vuoto se il topic pubblica valori numerici grezzi.
+ON値: "ON"を意味する正確な文字列。自動検出（ON、true、1）の場合は空のままにしてください。`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"電力URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"電力乗数",restEnergyUrl:"エネルギーURL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"エネルギー乗数",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"電力データ用の個別URL（空欄の場合はステータスURLを使用）",restEnergyUrlHint:"エネルギーデータ用の個別URL（空欄の場合はステータスURLを使用）",restEnergyHint:"各値は個別のURLを使用するか、ステータスURLにフォールバックできます。乗数で単位変換が可能です（例：WhからkWhへの変換は0.001）。",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"スイッチバーにスイッチがありません",enableSwitchbarHint:"設定 > スマートプラグで「スイッチバーに表示」を有効にしてください"},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"メール",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTPメール通知",telegram:"Telegramボット経由の通知",discord:"Webhook経由でDiscordチャンネルに送信",ntfy:"無料のセルフホスト可能なプッシュ通知",pushover:"シンプルで信頼性の高いプッシュ通知",callmebot:"CallMeBot経由の無料WhatsApp通知",webhook:"任意のURLへの汎用HTTP POST",homeassistant:"Home Assistantダッシュボードの永続通知"},lastSuccess:"最終: {{date}}",error:"エラー",printer:"プリンター:",allPrinters:"すべてのプリンター",sendTestNotification:"テスト通知を送信",eventSettings:"イベント設定",enabled:"有効",sendFromProvider:"このプロバイダーから通知を送信",printEvents:"印刷イベント",printerStatus:"プリンターステータス",amsAlarms:"AMSアラーム",amsHtAlarms:"AMS-HTアラーム",printQueue:"印刷キュー",start:"開始",plateCheck:"プレートチェック",complete:"完了",failed:"失敗",stopped:"停止",progress:"進捗",offline:"オフライン",lowFilament:"フィラメント残量低下",maintenance:"メンテナンス",amsHumidity:"AMS湿度",amsTemp:"AMS温度",amsHtHumidity:"AMS-HT湿度",amsHtTemp:"AMS-HT温度",bedCooled:"ベッド冷却済み",firstLayer:"第1層完了",quiet:"静音",digest:"ダイジェスト {{time}}",printStarted:"印刷開始",plateNotEmpty:"プレートが空でない",plateNotEmptyDescription:"印刷前にオブジェクトが検出されました",printCompleted:"印刷完了",bedCooledLabel:"ベッド冷却済み",bedCooledDescription:"印刷後にベッドがしきい値以下に冷却",firstLayerCompleteLabel:"第1層完了",firstLayerCompleteDescription:"第1層完了時にスナップショット付きで通知",missingSpoolAssignmentLabel:"スプール割り当て不足",missingSpoolAssignmentDescription:"印刷開始時に必要トレイへスプールが未割り当ての場合に通知",printFailed:"印刷失敗",printStopped:"印刷停止",progressMilestones:"進捗マイルストーン",progressMilestonesDescription:"25%、50%、75%で通知",printerOffline:"プリンターオフライン",printerError:"プリンターエラー",lowFilamentLabel:"フィラメント残量低下",maintenanceDue:"メンテナンス期限",maintenanceDueDescription:"メンテナンスが必要な場合に通知",amsHumidityHigh:"AMS湿度高",amsHumidityHighDescription:"通常AMSの湿度がしきい値を超過",amsTemperatureHigh:"AMS温度高",amsTemperatureHighDescription:"通常AMSの温度がしきい値を超過",amsHtHumidityHigh:"AMS-HT湿度高",amsHtHumidityHighDescription:"AMS-HTの湿度がしきい値を超過",amsHtTemperatureHigh:"AMS-HT温度高",amsHtTemperatureHighDescription:"AMS-HTの温度がしきい値を超過",jobAdded:"ジョブ追加",jobAddedDescription:"キューにジョブが追加されました",jobAssigned:"ジョブ割り当て",jobAssignedDescription:"モデルベースのジョブがプリンターに割り当てられました",jobStarted:"ジョブ開始",jobStartedDescription:"キュージョブの印刷が開始されました",jobWaiting:"ジョブ待機中",jobWaitingDescription:"フィラメントまたはプリンター待ちのジョブ",jobSkipped:"ジョブスキップ",jobSkippedDescription:"ジョブがスキップされました（前のジョブが失敗）",jobFailed:"ジョブ失敗",jobFailedDescription:"ジョブの開始に失敗しました",queueComplete:"キュー完了",queueCompleteDescription:"すべてのキュージョブが完了しました",quietHours:"静音時間",noNotificationsDuring:"この時間帯は通知を送信しません",editProviderToChangeQuietHours:"プロバイダーを編集して静音時間を変更",dailyDigest:"デイリーダイジェスト",batchNotifications:"通知をまとめて1日のサマリーとして送信",sendAt:"{{time}}に送信",editProviderToChangeDigestTime:"プロバイダーを編集してダイジェスト時刻を変更",edit:"編集",deleteProvider:"通知プロバイダーを削除",deleteConfirm:'"{{name}}"を削除してもよろしいですか？この操作は取り消せません。',delete:"削除",addTitle:"通知プロバイダーを追加",editTitle:"通知プロバイダーを編集",nameLabel:"名前 *",namePlaceholder:"マイ通知",providerTypeLabel:"プロバイダータイプ *",configuration:"設定",testConfiguration:"設定をテスト",printerFilter:"プリンターフィルター",onlyFromPrinter:"このプリンターからのイベントのみ通知を送信",quietHoursDnd:"静音時間（おやすみモード）",quietStart:"開始",quietEnd:"終了",dailyDigestLabel:"デイリーダイジェスト",sendDigestAt:"ダイジェスト送信時刻",digestCollected:"イベントが収集され、この時刻にまとめて送信されます",notificationEvents:"通知イベント",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（印刷完了後）",eventPriority:{sectionTitle:"ntfy 優先度",helpNtfy:"有効な各イベントに優先度を選択してください。ntfy はこれを使って通知の挙動（音、表示、プッシュ動作）を切り替えます。ここで設定していないレベルは ntfy サーバーのデフォルトを使用します。",min:"最小",low:"低",default:"デフォルト",high:"高",urgent:"緊急"},cancel:"キャンセル",save:"保存",add:"追加",nameRequired:"名前は必須です",fieldRequired:"{{field}}は必須です",phoneNumber:"電話番号",apiKey:"APIキー",serverUrl:"サーバーURL",topic:"トピック",authToken:"認証トークン",userKey:"ユーザーキー",appToken:"アプリトークン",priority:"優先度",botToken:"ボットトークン",chatId:"チャットID",smtpServer:"SMTPサーバー",smtpPort:"SMTPポート",security:"セキュリティ",authentication:"認証",username:"ユーザー名",password:"パスワード",fromEmail:"送信元メール",toEmail:"宛先メール",webhookUrl:"Webhook URL",payloadFormat:"ペイロード形式",authorization:"認可",titleFieldName:"タイトルフィールド名",messageFieldName:"メッセージフィールド名",editTemplate:"テンプレートを編集: {{name}}",titleLabel:"タイトル",bodyLabel:"本文",titlePlaceholder:"通知タイトル...",bodyPlaceholder:"通知本文...",availableVariables:"利用可能な変数",clickToInsert:"クリックして本文のカーソル位置に挿入",livePreview:"ライブプレビュー",hide:"非表示",show:"表示",loadingPreview:"プレビューを読み込み中...",enterTemplateContent:"テンプレートの内容を入力するとプレビューが表示されます",titlePreview:"タイトル:",bodyPreview:"本文:",resetToDefault:"デフォルトにリセット",titleRequired:"タイトルは必須です",bodyRequired:"本文は必須です",notificationLog:"通知ログ",showFailedOnly:"失敗のみ",last24Hours:"過去24時間",last7Days:"過去7日間",last30Days:"過去30日間",last90Days:"過去90日間",justNow:"たった今",noFailedNotifications:"失敗した通知はありません",noNotificationsLogged:"記録された通知はありません",unknownProvider:"不明なプロバイダー",logTitle:"タイトル",logMessage:"メッセージ",logError:"エラー",logProvider:"プロバイダー: {{type}}",logTime:"時刻: {{time}}",refresh:"更新",clearOld:"古いものを削除",statsSummary:"過去{{days}}日間:",statsNotifications:"通知",statsSent:"{{count}}件送信",statsFailed:"{{count}}件失敗",eventTypes:{print_start:"印刷開始",print_complete:"印刷完了",print_failed:"印刷失敗",print_stopped:"印刷停止",print_progress:"進捗",printer_offline:"プリンターオフライン",printer_error:"プリンターエラー",filament_low:"フィラメント残量低下",maintenance_due:"メンテナンス期限",test:"テスト"},userEmail:{title:"通知",emailNotifications:"メール通知",emailNotificationsDesc:"自分の印刷ジョブに対してメール通知を受け取ります。メールは高度な認証で設定されたSMTP設定を使用して送信されます。",sendingTo:"通知の送信先",noEmailWarning:"アカウントにメールアドレスが設定されていません。管理者に連絡して追加してもらってください。",printJobNotifications:"印刷ジョブ通知",printJobNotificationsDesc:"送信した印刷ジョブのどのイベントでメール通知を送るかを選択します。",printJobStarts:"印刷ジョブ開始",printJobStartsDesc:"印刷ジョブが開始されたときに通知を受け取る。",printJobFinishes:"印刷ジョブ完了",printJobFinishesDesc:"印刷ジョブが正常に完了したときに通知を受け取る。",printErrors:"印刷エラー",printErrorsDesc:"印刷ジョブが失敗またはエラーが発生したときに通知を受け取る。",printJobStops:"印刷ジョブ停止",printJobStopsDesc:"印刷ジョブがキャンセルまたは停止されたときに通知を受け取る。",saveSuccess:"通知設定を保存しました。",saveError:"通知設定の保存に失敗しました。"}},richTextEditor:{bold:"太字",italic:"斜体",underline:"下線",bulletList:"箇条書きリスト",numberedList:"番号付きリスト",alignLeft:"左揃え",alignCenter:"中央揃え",alignRight:"右揃え",addLink:"リンクを追加",removeLink:"リンクを削除"},externalLinks:{noLinksConfigured:"外部リンクが設定されていません",deleteLink:"リンクを削除",removeCustomIcon:"カスタムアイコンを削除",openInNewTab:"新しいタブで開く",placeholders:{linkName:"マイリンク"}},keyboardShortcuts:{title:"キーボードショートカット",navigation:"ナビゲーション",archivesSection:"アーカイブ",kProfilesSection:"Kプロファイル",generalSection:"全般",shortcuts:{goToPrinters:"プリンターへ移動",goToArchives:"アーカイブへ移動",goToQueue:"キューへ移動",goToStats:"統計へ移動",goToProfiles:"クラウドプロファイルへ移動",goToSettings:"設定へ移動",focusSearch:"検索にフォーカス",openUploadModal:"アップロードモーダルを開く",clearSelection:"選択をクリア / 入力をぼかす",contextMenu:"カードのコンテキストメニュー",refreshProfiles:"プロファイルを更新",newProfile:"新しいプロファイル",exitSelectionMode:"選択モードを終了",showHelp:"このヘルプを表示"},footer:"Escキーを押すか外側をクリックして閉じます"},notificationLog:{title:"通知ログ",events:{printStarted:"印刷開始",printComplete:"印刷完了",printFailed:"印刷失敗",printStopped:"印刷停止",progress:"進捗",printerOffline:"プリンターオフライン",printerError:"プリンターエラー",lowFilament:"フィラメント残量低下",maintenanceDue:"メンテナンス期限",test:"テスト"},timeAgo:{justNow:"たった今",minutesAgo:"{{minutes}}分前",hoursAgo:"{{hours}}時間前"}},restoreBackup:{title:"バックアップを復元",restoring:"復元中...",restoreComplete:"復元完了",restoreFailed:"復元失敗",importSettings:"バックアップファイルから設定をインポート",pleaseWait:"データの復元中です。しばらくお待ちください",clickToSelect:"クリックしてバックアップファイルを選択（.jsonまたは.zip）",howDuplicateHandling:"重複の処理方法:",categories:{printers:"プリンター",smartPlugs:"スマートプラグ",notificationProviders:"通知プロバイダー",filaments:"フィラメント",archives:"アーカイブ",pendingUploads:"保留中のアップロード",settingsTemplates:"設定とテンプレート"},matchingInfo:{printers:"シリアル番号で照合",smartPlugs:"IPアドレスで照合",notificationProviders:"名前で照合",filaments:"名前+タイプ+ブランドで照合",archives:"コンテンツハッシュで照合",pendingUploads:"ファイル名で照合",settingsTemplates:"常に上書き"},replaceExisting:"既存データを置き換え",keepExisting:"既存データを保持",replaceDescription:"既に存在するアイテムをバックアップデータで上書き",keepDescription:"まだ存在しないアイテムのみを復元",caution:"注意:",cautionText:"上書きすると現在の構成がバックアップデータに置き換えられます。セキュリティ上の理由から、プリンターのアクセスコードは上書きされません。",itemsRestored:"復元されたアイテム",itemsSkipped:"スキップされたアイテム",restored:"復元済み",skipped:"スキップ（既に存在）",filesLabel:"ファイル（3MF、サムネイルなど）",newApiKeysGenerated:"新しいAPIキーが生成されました",newApiKeysWarning:"これらのキーは一度だけ表示されます。今すぐコピーしてください！",processingBackup:"バックアップファイルを処理中...",noDataFound:"バックアップファイルに復元するデータが見つかりませんでした。",failedToRestore:"バックアップの復元に失敗しました。ファイル形式を確認してください。"},backupExport:{title:"バックアップをエクスポート",selectData:"含めるデータを選択",selectAll:"すべて選択",selectNone:"なし",categoryDescriptions:{settings:"言語、テーマ、更新設定",notifications:"ntfy、Pushover、Discordなど",templates:"カスタムメッセージテンプレート",smartPlugs:"Tasmotaプラグ設定",externalLinks:"サイドバーの外部サービスへのリンク",printers:"プリンター情報（アクセスコード除外）",plateDetection:"空プレート参照画像",filaments:"フィラメントの種類とコスト",maintenance:"カスタムメンテナンススケジュール",archives:"すべての印刷データ+ファイル（3MF、サムネイル、写真）",projects:"プロジェクト、BOMアイテム、添付ファイル",pendingUploads:"仮想プリンターアップロード待機中",apiKeys:"Webhook APIキー（インポート時に新しいキーが生成されます）"},requiresPrinters:"プリンターを選択する必要があります",zipFileWarning:"ZIPファイルが作成されます。",zipFileDescription:"すべての3MFファイル、サムネイル、タイムラプス、写真が含まれます。これには時間がかかり、大きなファイルになる可能性があります。",includeAccessCodes:"アクセスコードを含める",includeAccessCodesDescription:"別のマシンへの転送用",includeAccessCodesWarning:"アクセスコードはプレーンテキストで含まれます。このバックアップファイルを安全に保管してください！",categoriesSelected:"{{selectedCount}}カテゴリー選択済み"},pendingUploads:{placeholders:{notes:"この印刷に関するメモを追加..."},discardUpload:"アップロードを破棄",archiveAllUploads:"すべてのアップロードをアーカイブ",discardAllUploads:"すべてのアップロードを破棄",archive:"アーカイブ",timeAgo:{justNow:"たった今",minutesAgo:"{{minutes}}分前",hoursAgo:"{{hours}}時間前",daysAgo:"{{days}}日前"}},apiBrowser:{placeholders:{requestBody:"JSONリクエストボディ...",searchEndpoints:"エンドポイントを検索..."}},configureAmsSlot:{title:"AMSスロットの設定",slotConfigured:"スロットを設定しました！",configuringSlot:"スロットを設定中：",slotLabel:"{{ams}} スロット {{slot}}",searchPresets:"プリセットを検索...",colorPlaceholder:"色名またはHex（例: 茶色、FF8800）",clearCustomColor:"カスタム色をクリア",noCloudPresets:"クラウドプリセットがありません。Bambu Cloudにログインして同期してください。",noPresetsAvailable:"プリセットがありません。Bambu Cloudにログインするか、ローカルプロファイルをインポートしてください。",noMatchingPresets:"一致するプリセットが見つかりません。",custom:"カスタム",builtin:"内蔵",settingsSentToPrinter:"設定をプリンターに送信しました",filamentProfile:"フィラメントプロファイル",kProfileLabel:"Kプロファイル（Pressure Advance）",filteringFor:"フィルター中: {{material}}",noKProfile:"Kプロファイルなし（デフォルト0.020を使用）",noMatchingKProfiles:"一致するKプロファイルが見つかりません。デフォルトK=0.020が使用されます。",selectFilamentFirst:"まずフィラメントプロファイルを選択してください",kFromCalibration:"K={{value}}（プリンターキャリブレーションから）",customColorLabel:"カスタム色（オプション）",presetColors:"{{name}}の色：",showLessColors:"色を減らす",showMoreColors:"色をもっと表示",clear:"クリア",hexLabel:"Hex: #{{hex}}",resetting:"リセット中...",resetSlot:"スロットをリセット",cancel:"キャンセル",configuring:"設定中...",configureSlot:"スロットを設定"},githubBackup:{title:"GitHubバックアップ",history:"履歴",downloadBackup:"バックアップをダウンロード",restoreBackup:"バックアップを復元",noBackupsYet:"バックアップはまだありません"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"タグを検索...",renameTag:"タグ名を変更",deleteTag:"タグを削除"},notificationTemplates:{placeholders:{title:"通知タイトル...",body:"通知本文..."}},batchTag:{placeholders:{newTag:"新しいタグを入力..."}},photoGallery:{deletePhoto:"写真を削除"},filamentHoverCard:{copySpoolUuid:"スプールUUIDをコピー"},kProfilesView:{hasNote:"メモあり",copyProfile:"プロファイルをコピー"},layout:{openMenu:"メニューを開く",noPermissionSystemInfo:"システム情報を表示する権限がありません"},dashboard:{dragToReorder:"ドラッグして並べ替え",hideWidget:"ウィジェットを非表示"},notificationProviderCard:{deleteNotificationProvider:"通知プロバイダーを削除"},fileManagerModal:{closeFileManager:"ファイルマネージャーを閉じる",sortFiles:"ファイルを並べ替え",goToParentFolder:"親フォルダーへ移動",threeView:"3Dビュー"},embeddedCameraViewer:{refreshStream:"ストリームを更新",close:"閉じる",zoomOut:"ズームアウト",resetZoom:"ズームをリセット",zoomIn:"ズームイン",dragToResize:"ドラッグしてサイズ変更"},timelapseViewer:{skipBack5s:"5秒戻る",skipForward5s:"5秒進む"},notificationProviders:{descriptions:{email:"SMTP電子メール通知",telegram:"Telegramボット経由の通知",discord:"Webhookを介してDiscordチャンネルに送信",ntfy:"無料でセルフホスト可能なプッシュ通知",pushover:"シンプルで信頼性の高いプッシュ通知",callmebot:"CallMeBot経由の無料WhatsApp通知",webhook:"任意のURLへのジェネリックHTTP POST"}},logViewer:{searchPlaceholder:"メッセージまたはロガー名を検索...",noLogEntries:"ログエントリが見つかりません"},switchbarPopover:{noSwitchesInSwitchbar:"スイッチバーにスイッチがありません"},projectPageModal:{placeholders:{title:"タイトル",designer:"デザイナー",license:"ライセンス",description:"説明を入力...",profileTitle:"プロファイルタイトル",profileDescription:"プロファイルの説明..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"待機中",justNow:"たった今",now:"今すぐ",minsAgo:"{{count}}分前",inMins:"あと{{count}}分",hoursAgo:"{{count}}時間前",inHours:"あと{{count}}時間",daysAgo:"{{count}}日前",inDays:"あと{{count}}日"},spoolbuddy:{nav:{dashboard:"ダッシュボード",ams:"AMS",inventory:"インベントリ",writeTag:"書込み",settings:"設定"},status:{nfcReady:"NFC準備完了",nfcOff:"NFCオフ",offline:"オフライン",online:"オンライン",noPrinters:"プリンターなし",deviceOffline:"デバイスオフライン",waitingConnection:"デバイス接続を待っています...",systemReady:"システム準備完了",status:"ステータス"},dashboard:{readyToScan:"スキャン準備完了",idleMessage:"スプールを計量台に置いて識別します",nfcHint:"NFCタグは自動的に読み取られます",device:"デバイス",syncWeight:"重量同期",weightSynced:"同期完了！",unknownTag:"不明なタグ",newTag:"新しいタグを検出",onScale:"計量中",linkSpool:"スプールにリンク",linkTagTitle:"タグをスプールにリンク",linkTag:"タグをリンク",selectSpool:"このタグにリンクするスプールを選択:",noUntagged:"タグなしのスプールが見つかりません",tagDetected:"タグ検出",noTag:"タグなし",tagId:"タグ",grossWeight:"総重量",spoolSize:"スプールサイズ",close:"閉じる",currentSpool:"現在のスプール",plateReady:"プレート準備完了: {{name}}",plateReadyLabel:"片付け待ちプレート",plateClearAction:"片付け",plateClearedToast:"プレートを片付け済みにしました",plateClearFailed:"プレートを片付け済みにできませんでした"},modal:{spoolDetected:"スプール検出",assignToAms:"AMSに割り当て",syncWeight:"重量同期",weightSynced:"同期完了！",syncing:"同期中...",newTagDetected:"新しいタグを検出",addToInventory:"インベントリに追加",assignToAmsTitle:"AMSに割り当て",selectSlot:"スロットを選択",assign:"割り当て",assigning:"割り当て中...",assignSuccess:"割り当て完了！",assignError:"スプールの割り当てに失敗しました。再試行してください。",noPrinterSelected:"プリンターを選択...",noAmsDetected:"このプリンターにAMSが検出されません",slot:"スロット"},weight:{noReading:"読み取りなし",stable:"安定",measuring:"計測中...",tare:"風袋引き",calibrate:"キャリブレーション"},spool:{remaining:"残量",material:"素材",brand:"ブランド",color:"色",coreWeight:"コア",labelWeight:"ラベル",scaleWeight:"計量",netWeight:"正味",lastUsed:"最終使用"},ams:{noData:"AMSが検出されません",connectAms:"AMSを接続してスロットを表示",noPrinter:"プリンター未選択",selectPrinter:"上部バーからプリンターを選択",printerDisconnected:"プリンター切断",humidity:"湿度",level:"レベル",active:"アクティブ",slot:"スロット",empty:"空"},inventory:{search:"スプールを検索...",empty:"インベントリにスプールがありません",noResults:"一致するスプールがありません",spools:"スプール",addSpool:"スプール追加"},settings:{tabDevice:"デバイス",tabDisplay:"ディスプレイ",tabScale:"計量",tabUpdates:"アップデート",nfcReader:"NFCリーダー",type:"タイプ",connection:"接続",notConnected:"N/A",deviceInfo:"デバイス情報",hostname:"ホスト",uptime:"稼働時間",brightness:"明るさ",saved:"保存済み",noBacklight:"DSIバックライトが検出されませんでした。明るさ制御にはDSIディスプレイが必要です。",screenBlank:"画面オフタイムアウト",screenBlankDesc:"操作がないと画面がオフになります。タッチで復帰。",displayNote:"明るさはソフトウェアフィルターとして適用されます。",scaleCalibration:"計量キャリブレーション",currentWeight:"現在の重量",tareOffset:"風袋",calFactor:"係数",knownWeight:"既知の重量",calStep1:"計量台からすべてのアイテムを取り除き、ゼロ設定を押してください。",calStep2:"既知の重量を計量台に置いてください。",setZero:"ゼロ設定",calibrateNow:"キャリブレーション",calibrated:"キャリブレーション済み",tareSet:"風袋コマンドを送信しました。デバイスを待っています...",tareFailed:"風袋コマンドの送信に失敗しました",zeroSet:"ゼロ点を設定しました。既知の重量を計量台に置いてください。",calibrationDone:"キャリブレーション完了！",calibrationFailed:"キャリブレーションに失敗しました",lastCalibrated:"最終キャリブレーション",stable:"安定",settling:"安定化中...",firmware:"ファームウェア",scale:"計量",noDevice:"SpoolBuddyデバイスが見つかりません",daemonVersion:"デーモンバージョン",currentVersion:"現在",versionPending:"デーモンを待っています...",checking:"確認中...",checkUpdates:"アップデートを確認",updateAvailable:"アップデートあり",updateInstructions:"SSH経由で更新：SpoolBuddyインストールスクリプトを実行してください。",upToDate:"最新です",includeBeta:"ベータ版を含む",systemConfig:"バックエンドと認証",backendUrl:"BambuddyバックエンドURL",apiToken:"APIトークン",apiTokenPlaceholder:"APIトークンを入力",saveConfig:"設定を保存",systemQueued:"設定をキューに追加しました。",systemFieldsRequired:"バックエンドURLは必須です。",nfcDiagnostic:"NFC診断",scaleDiagnostic:"スケール診断",readTagDiagnostic:"タグ読み取り診断",testNfc:"リーダーをテスト",testScale:"精度をテスト",testReadTag:"タグを読み取り"},writeTag:{tabExisting:"既存のスプール",tabNew:"新規スプール",tabReplace:"タグ交換",searchPlaceholder:"素材、色、ブランドで検索...",noUntaggedSpools:"タグなしのスプールがありません",noTaggedSpools:"タグ付きのスプールがありません",selectSpool:"スプールを選択し、NTAGをリーダーに置いてください",placeTag:"NTAGをリーダーに置いてください",tagReady:"タグ検出 — 書込み準備完了",writeTag:"タグ書込み",replaceTag:"タグ交換",writing:"タグ書込み中...",waiting:"SpoolBuddyを待機中...",writeSuccess:"タグの書込みが完了しました！",writeFailed:"書込み失敗",queueFailed:"書込みコマンドのキューに失敗しました",tryAgain:"再試行",cancel:"キャンセル",replaceWarning:"古いタグのリンクが解除され、新しいタグに置き換わります。",deviceOffline:"SpoolBuddyはオフラインです",material:"素材",colorName:"色名",color:"色",brand:"ブランド",weight:"重量 (g)",createSpool:"スプール作成",creating:"作成中...",spoolCreated:"スプール作成完了！書込み準備ができました。",createFailed:"スプールの作成に失敗しました"},quickMenu:{printerPower:"プリンター電源",systemControls:"システム",restartDaemon:"デーモン再起動",restartBrowser:"ブラウザ再起動",reboot:"再起動",shutdown:"シャットダウン",swipeToClose:"下にスワイプして閉じる",confirmTitle:"確認",confirmShutdown:"SpoolBuddyをシャットダウンしますか？再起動するには物理的なアクセスが必要です。",confirmReboot:"SpoolBuddyを再起動しますか？",confirmRestartDaemon:"SpoolBuddyデーモンを再起動しますか？NFCとスケールが一時的に使用できなくなります。",confirmRestartBrowser:"キオスクブラウザを再起動しますか？画面が一時的に暗くなります。",confirm:"確認",confirmPlugOn:"{{name}}をオンにしますか？",confirmPlugOff:"{{name}}をオフにしますか？",turnOn:"オン",turnOff:"オフ"}},bugReport:{title:"バグを報告",description:"説明",descriptionPlaceholder:"何が問題でしたか？問題を説明してください...",email:"メールアドレス（任意）",emailPlaceholder:"your@email.com",emailPrivacy:"入力された場合、メールアドレスはGitHub Issueの折りたたみセクションに含まれ、メンテナーがフォローアップできるようになります。",screenshot:"スクリーンショット",uploadOrPaste:"画像をアップロード、貼り付け、またはドラッグ",dataCollectedSummary:"レポートに含まれるデータは？",dataIncluded:"含まれるもの:",dataIncludedList:"アプリバージョン、OS、アーキテクチャ、Pythonバージョン、データベース統計（件数のみ）、プリンターモデル、ノズル数、ファームウェアバージョン、接続状態、統合状態（Spoolman、MQTT、HA）、非機密設定、ネットワークインターフェース数、Docker詳細、依存関係バージョン。",dataNeverIncluded:"含まれないもの:",dataNeverIncludedList:"プリンター名、シリアル番号、アクセスコード、パスワード、IPアドレス、メールアドレス、APIキー、トークン、Webhook URL、ホスト名、ユーザー名。",submit:"送信",startLogging:"デバッグログ開始",stepEnableLogging:"デバッグログ有効",stepReproduce:"問題を再現してください",stepStopLogging:"停止してレポート送信",stopAndSubmit:"停止して送信",maxDuration:"{{minutes}}分後に自動停止",stoppingLogs:"ログ収集・送信中...",submitting:"バグレポートを送信中...",submitSuccess:"バグレポートが正常に送信されました！",submitFailed:"バグレポートの送信に失敗しました",thankYou:"ありがとうございます！",submitted:"バグレポートが送信されました。",viewIssue:"Issueを表示",unexpectedError:"予期しないエラーが発生しました"},failureDetection:{title:"AI 失敗検出",description:"セルフホストされた Obico ML API で印刷を監視し、検出された失敗に自動的に対応します。",mlUrl:"Obico ML API の URL",mlUrlHint:"セルフホストした Obico ml_api コンテナのベース URL (例: http://192.168.1.10:3333)。",test:"テスト",testSuccess:"ML API に接続でき、正常です。",testFailed:"ML API に接続できませんでした。",sensitivity:"感度",sensitivityLow:"低(誤検出が少ない)",sensitivityMedium:"中(バランス型)",sensitivityHigh:"高(早期検出、誤検出が増加)",sensitivityHint:"警告と失敗をトリガーする信頼度のしきい値を調整します。",action:"失敗検出時の動作",actionNotify:"通知のみ",actionPause:"印刷を一時停止",actionPauseOff:"一時停止して電源を切る",pollInterval:"ポーリング間隔(秒)",pollIntervalHint:"印刷中に各プリンターをチェックする頻度。最小 5 秒、最大 120 秒。",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"監視対象プリンター",perPrinterHint:"検出サービスが監視するプリンターを選択します。",monitorAll:"接続されているすべてのプリンターを監視",statusTitle:"ステータス",serviceRunning:"サービス稼働中",thresholds:"低 / 高しきい値",activePrinters:"アクティブな印刷",noActivePrints:"現在、実行中の印刷はありません。",historyTitle:"最近の検出",noHistory:"まだ検出はありません。"},makerworld:{title:"MakerWorld",description:"MakerWorld モデルの URL を貼り付けると、Bambu Handy アプリを開かなくても Bambuddy から直接インポート・印刷できます。",pasteUrlHeader:"MakerWorld からインポート",pasteUrlPlaceholder:"https://makerworld.com/en/models/… または任意の MakerWorld リンク",resolveButton:"読み込む",signInRequiredTitle:"ダウンロードには Bambu Cloud へのサインインが必要です",signInRequiredBody:"モデルの詳細は匿名で閲覧できますが、3MF ファイルをダウンロードするには Bambu Cloud アカウントが必要です。",openCloudSettings:"Cloud 設定を開く",untitledModel:"無題のモデル",byCreator:"作成者: {{name}}",downloadsCount:"ダウンロード数: {{count}}",licensePrefix:"ライセンス",alreadyImported:"ライブラリに登録済み",openOnMakerworld:"MakerWorld で開く",alreadyInLibrary:"このモデルはすでにライブラリにあります — ファイルマネージャー → MakerWorld で確認できます",importSuccess:"{{filename}} をインポートしました — ファイルマネージャー → MakerWorld に保存済み",platesHeader:"プレート ({{count}})",plateDefaultName:"プレート {{n}}",materialCount:"フィラメント {{count}} 本",amsRequired:"AMS が必要",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"保存",sliceIn:"保存して {{slicer}} でスライス",disclaimer:"MakerWorld 連携はコミュニティで文書化された API エンドポイントを使用しています。Bambuddy は MakerWorld または Bambu Lab との提携・承認関係はありません。",lastImportSuccess:"ライブラリにインポートしました",lastImportAlreadyInLibrary:"既にライブラリに存在します",viewInLibrary:"ファイルマネージャーで表示",openInBambuStudio:"Bambu Studio で開く",openInOrcaSlicer:"OrcaSlicer で開く",importTo:"ファイルマネージャーへのインポート先",recentImportsHeader:"最近のインポート",phaseResolving:"解決中",phaseDownloading:"ダウンロード中",folderAuto:"MakerWorld (デフォルト)",importAll:"すべてインポート",importAllProgress:"インポート中 {{current}}/{{total}}",openGallery:"画像ギャラリーを開く",galleryPrev:"前の画像",galleryNext:"次の画像",deleteImport:"ライブラリから削除",importDeleting:"削除中…",importDeleted:"ライブラリから削除しました",confirmDelete:"{{filename}} をライブラリから削除しますか？ローカルファイルは削除されますが、MakerWorld から再インポートできます。",errors:{resolveFailed:"この MakerWorld URL を解決できませんでした。",downloadFailed:"ダウンロードに失敗しました。もう一度お試しください。",deleteFailed:"ライブラリからファイルを削除できませんでした。"}},libraryTrash:{title:"ゴミ箱",headerButton:"ゴミ箱",headerTooltip:"ゴミ箱に移動したファイルを表示",backToFiles:"ファイルマネージャーに戻る",subtitleAdmin:"削除されたファイルは {{days}} 日間ゴミ箱に残り、その後自動的に削除されます。このビューには全ユーザーのゴミ箱が表示されます。",subtitleUser:"削除されたファイルは {{days}} 日間ゴミ箱に残り、その後自動的に削除されます。",loading:"ゴミ箱を読み込み中…",loadError:"ゴミ箱を読み込めませんでした。",empty:"ゴミ箱は空です。",summary:"{{count}} 件 · {{size}}",emptyTrash:"ゴミ箱を空にする",restore:"復元",purgeNow:"今すぐ削除",autoPurgeIn:"{{when}} に自動削除",days:"日",retentionLabel:"自動削除までの期間",selectAll:"すべて選択",selectOne:"{{filename}} を選択",selectionCount:"{{count}} 件選択中",bulkRestore:"選択したものを復元",bulkPurge:"選択したものを削除",col:{filename:"ファイル",folder:"フォルダ",size:"サイズ",deleted:"ゴミ箱に移動",autoPurge:"自動削除",owner:"所有者",actions:"操作"},confirm:{purgeTitle:"完全に削除しますか？",purgeBody:"{{filename}} はディスクから削除され、復元できません。",emptyTitle:"ゴミ箱を空にしますか？",emptyBody:"{{count}} 件のファイルすべてがディスクから削除されます。この操作は取り消せません。",bulkPurgeTitle:"選択したファイルを完全に削除しますか？",bulkPurgeBody:"選択した {{count}} 件のファイルがディスクから削除され、復元できません。",cta:"完全に削除"},toast:{restored:"ファイルを復元しました。",restoreFailed:"ファイルを復元できませんでした。",purged:"ファイルを完全に削除しました。",purgeFailed:"ファイルを削除できませんでした。",emptied:"ゴミ箱から {{count}} 件のファイルを削除しました。",emptyFailed:"ゴミ箱を空にできませんでした。",retentionSaved:"自動削除を {{days}} 日に設定しました。",retentionFailed:"保持期間の設定を保存できませんでした。",bulkRestored:"{{count}} 件のファイルを復元しました。",bulkPurged:"{{count}} 件のファイルを削除しました。"}},libraryPurge:{title:"古いファイルを一括削除",headerButton:"古いファイル削除",headerTooltip:"古いファイルをまとめてゴミ箱に移動",description:"指定した期間より古いファイルはゴミ箱に移動されます。外部フォルダはスキップされます。自動削除までの間、ゴミ箱から復元できます。",ageLabel:"次より古いファイルを移動",days:"日",includeNeverPrinted:"一度も印刷していないファイルも含める",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"対象ファイル数を確認中…",previewFailed:"プレビューを取得できませんでした。",previewSummary:"{{count}} 件 · {{size}} がゴミ箱に移動されます",andMore:"…ほか {{count}} 件",warning:"ファイルはソフト削除されます — 保持期間が終了するまでゴミ箱から復元できます。",confirmCta:"{{count}} 件をゴミ箱へ移動",purging:"ゴミ箱へ移動中…",toast:{success:"{{count}} 件のファイルをゴミ箱に移動しました。",failed:"ファイルを削除できませんでした。"}},libraryAutoPurge:{enableLabel:"古いファイルを自動で一括削除",enableDescription:"管理者の一括削除を 1 日 1 回実行します。ファイルはまずゴミ箱に移動され、すぐには削除されません。",ageLabel:"次より古いファイルを自動削除",ageDescription:"最短 7 日、最長 10 年。手動の「古いファイル削除」ボタンと同じ期間ルールを使用します。",days:"日",includeNeverPrinted:"一度も印刷していないファイルも含める",saveFailed:"自動削除の設定を保存できませんでした。"},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},_me={nav:{printers:"Stampanti",archives:"Archivi",queue:"Coda",stats:"Statistiche",profiles:"Profili",maintenance:"Manutenzione",projects:"Progetti",inventory:"Filamento",files:"File",makerworld:"MakerWorld",notifications:"Notifiche",settings:"Impostazioni",system:"Sistema",collapseSidebar:"Comprimi barra laterale",expandSidebar:"Espandi barra laterale",update:"Aggiorna",updateAvailable:"Aggiornamento disponibile: v{{version}}",updateAvailableBanner:"Versione {{version}} disponibile!",viewUpdate:"Vedi aggiornamento",viewOnGithub:"Vedi su GitHub",keyboardShortcuts:"Scorciatoie da tastiera (?)",switchToLight:"Passa a tema chiaro",switchToDark:"Passa a tema scuro",smartSwitches:"Interruttori Smart",logout:"Esci"},common:{save:"Salva",saving:"Salvataggio...",cancel:"Annulla",delete:"Elimina",edit:"Modifica",add:"Aggiungi",close:"Chiudi",confirm:"Conferma",loading:"Caricamento...",error:"Errore",success:"Successo",warning:"Avviso",enabled:"Abilitato",disabled:"Disabilitato",yes:"Si",no:"No",on:"On",off:"Off",all:"Tutti",none:"Nessuno",search:"Cerca",filter:"Filtro",sort:"Ordina",refresh:"Aggiorna",download:"Scarica",upload:"Carica",uploading:"Caricamento...",uploadFailed:"Caricamento fallito",actions:"Azioni",status:"Stato",name:"Nome",description:"Descrizione",date:"Data",time:"Ora",hours:"ore",minutes:"minuti",seconds:"secondi",days:"giorni",enable:"Abilita",disable:"Disabilita",permissions:"Permessi",noPrinters:"Nessuna stampante configurata",noData:"Nessun dato disponibile",linkNotFound:"Link non trovato",required:"Obbligatorio",optional:"Opzionale",dismiss:"Chiudi",apply:"Applica",reset:"Reimposta",export:"Esporta",import:"Importa",clear:"Pulisci",selectAll:"Seleziona tutto",deselectAll:"Deseleziona tutto",noChange:"— Nessun cambio —",unchanged:"Invariato",unassigned:"Non assegnato",unknown:"Sconosciuto",unknownError:"Errore sconosciuto",today:"Oggi",tomorrow:"Domani",asap:"ASAP",overdue:"Scaduto",now:"Ora",collapse:"Comprimi",expand:"Espandi",viewArchive:"Vedi archivio",viewInFileManager:"Vedi nel Gestore file",addedBy:"Aggiunto da {{username}}",prints:"stampe",more:"+{{count}} altre",ascending:"Crescente",descending:"Decrescente",back:"Indietro",copy:"Copia",copied:"Copiato!",printer:"Stampante",remove:"Rimuovi",type:"Tipo",print:"Stampa",rename:"Rinomina",move:"Sposta",create:"Crea",duplicate:"Duplica",left:"Sinistra",right:"Destra"},printers:{title:"Stampanti",addPrinter:"Aggiungi Stampante",editPrinter:"Modifica Stampante",deletePrinter:"Elimina Stampante",printerName:"Nome Stampante",serialNumber:"Numero Seriale",ipAddress:"Indirizzo IP",accessCode:"Codice di Accesso",model:"Modello",nozzleCount:"Numero Ugelli",autoArchive:"Auto Archiviazione",status:{available:"Disponibile",idle:"Inattiva",printing:"In stampa",paused:"In pausa",offline:"Offline",problem:"Problema",error:"Errore",finished:"Finita",unknown:"Sconosciuto"},temperatures:{nozzle:"Ugello",bed:"Piatto",chamber:"Camera"},progress:"{{percent}}% completato",timeRemaining:"{{time}} rimanente",deleteConfirm:'Sei sicuro di eliminare "{{name}}"?',maintenanceOk:"Manutenzione OK",maintenanceWarning:"{{count}} avviso",maintenanceWarning_plural:"{{count}} avvisi",maintenanceDue:"{{count}} in scadenza",maintenanceDue_plural:"{{count}} in scadenza",sort:{name:"Nome",status:"Stato",model:"Modello",location:"Posizione",ascending:"Ordina crescente",descending:"Ordina decrescente"},cardSize:{small:"Schede piccole",medium:"Schede medie",large:"Schede grandi",extraLarge:"Schede extra grandi"},hideOffline:"Nascondi offline",nextAvailable:"Prossima disponibile",powerOn:"Accendi",offlinePrintersWithPlugs:"Stampanti offline con smart plug",noPrintersConfigured:"Nessuna stampante configurata",search:"Cerca stampanti...",noSearchResults:"Nessuna stampante corrisponde alla tua ricerca o ai tuoi filtri",filter:{allStatuses:"Tutti gli stati",allLocations:"Tutti i luoghi"},readyToPrint:"Pronta a stampare",external:"Esterna",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Elimina archivi stampa",noLabel:"Nessuna etichetta",printPreview:"Anteprima stampa",width:"Larghezza",height:"Altezza",noObjectsFound:"Nessun oggetto trovato",objectsLoadedOnPrintStart:"Gli oggetti sono caricati quando inizia una stampa",willBeSkipped:"Verra saltato",name:"Nome",serialCannotBeChanged:"Il numero seriale non può essere cambiato",locationHelp:"Usato per raggruppare stampanti e filtrare i lavori in coda",wifiSignal:{veryWeak:"Molto debole",weak:"Debole",fair:"Discreto",good:"Buono",excellent:"Eccellente"},maintenanceUpToDate:"Tutta la manutenzione aggiornata - Clicca per vedere",chamberLightOn:"Accendi luce camera",chamberLightOff:"Spegni luce camera",files:"File",browseFiles:"Sfoglia file stampante",autoOffAfterPrint:"Spegnimento automatico dopo stampa",autoOffExecuted:"Spegnimento automatico eseguito - accendi la stampante per reimpostare",hmsErrors:"Errori HMS",viewHmsErrors:"Vedi {{count}} errore(i) HMS",resume:"Riprendi",pause:"Pausa",stop:"Ferma",camera:"Camera",skipObject:"Salta Oggetto",reconnect:"Riconnetti",forceRefresh:"Forza aggiornamento",forceRefreshSuccess:"Aggiornamento richiesto",mqttDebug:"Debug MQTT",printerInformation:"Informazioni stampante",copyToClipboard:"Copia",copied:"Copiato!",state:"Stato",wifiSignalLabel:"Segnale WiFi",developerMode:"Modalità sviluppatore",enabled:"Attivato",disabled:"Disattivato",addedOn:"Aggiunta il",sdCard:"Scheda SD",inserted:"Inserita",notInserted:"Non inserita",totalPrintHours:"Ore di stampa",activeNozzle:"Attivo: ugello {{nozzle}}",nozzleRack:"Rack Ugelli",nozzleDocked:"Agganciato",nozzleMounted:"Montato",nozzleActive:"Attivo",nozzleIdle:"Inattivo",nozzleDiameter:"Diametro",nozzleType:"Tipo",nozzleStatus:"Stato",nozzleFilament:"Filamento",nozzleWear:"Usura",nozzleMaxTemp:"Temp Max",nozzleSerial:"Seriale",nozzleHardenedSteel:"Acciaio Temprato",nozzleStainlessSteel:"Acciaio Inox",nozzleTungstenCarbide:"Carburo di Tungsteno",nozzleFlow:"Flusso",nozzleHighFlow:"Alto Flusso",nozzleStandardFlow:"Standard",firmwareUpdate:"Aggiornamento Firmware",firmwareInstructions:"Sul touchscreen della stampante, vai a",firmwareNav:"Vai a",settings:"Impostazioni",firmware:"Firmware",discoverPrinters:"Trova Stampanti",searching:"Ricerca...",manualEntry:"Inserimento manuale",addFromCloud:"Aggiungi da Cloud",toast:{printerDeleted:"Stampante eliminata",missingSpoolAssignment:"Stampa avviata su {{printer}}. Mancano assegnazioni bobina per: {{slots}}",printerAdded:"Stampante aggiunta",printerUpdated:"Stampante aggiornata",failedToDelete:"Impossibile eliminare stampante",failedToAdd:"Impossibile aggiungere stampante",failedToUpdate:"Impossibile aggiornare stampante",commandSent:"Comando inviato",failedToSendCommand:"Impossibile inviare comando",turnedOn:"{{name}} accesa",failedToPowerOn:"Impossibile accendere {{name}}",scriptTriggered:"Script avviato",printStopped:"Stampa fermata",printPaused:"Stampa in pausa",printResumed:"Stampa ripresa",referenceDeleted:"Riferimento eliminato",detectionAreaSaved:"Area rilevamento salvata",failedToRunScript:"Impossibile eseguire script",failedToStopPrint:"Impossibile fermare stampa",failedToPausePrint:"Impossibile mettere in pausa stampa",failedToResumePrint:"Impossibile riprendere stampa",failedToControlChamberLight:"Impossibile controllare luce camera",failedToSetSpeed:"Impossibile impostare la velocità di stampa",failedToUpdateSetting:"Impossibile aggiornare impostazione",failedToSkipObjects:"Impossibile saltare oggetti",failedToRereadRfid:"Impossibile rileggere RFID",failedToCheckPlate:"Impossibile controllare piatto",failedToUpdateLabel:"Impossibile aggiornare etichetta",failedToDeleteReference:"Impossibile eliminare riferimento",failedToSaveDetectionArea:"Impossibile salvare area rilevamento",plateCheckEnabled:"Controllo piatto abilitato",plateCheckDisabled:"Controllo piatto disabilitato",calibrationSaved:"Calibrazione salvata!",calibrationFailed:"Calibrazione non riuscita",rfidRereadInitiated:"Rilettura RFID avviata"},connection:{connected:"Connesso",offline:"Offline"},plateStatus:{markCleared:"Segna il piatto come liberato",cleared:"Piatto libero",notCleared:"Piatto non libero",inUse:"Piatto in uso"},queue:{inQueue:"{{count}} stampa in coda",inQueue_plural:"{{count}} stampe in coda"},controls:"Controlli",rfid:{reread:"Rileggi RFID"},bedJog:{title:"Muovi il piano di stampa",bed:"Piano",step:"Passo (mm)",up:"Sposta piano su",down:"Sposta piano giù",disabledWhilePrinting:"Disabilitato durante la stampa",notHomedTitle:"Stampante non azzerata",notHomedMessage:"La stampante non è stata azzerata dall'ultima stampa. Esegui prima l'azzeramento automatico per un posizionamento sicuro (parcheggia la testa di stampa, poi azzera X, Y e Z), oppure muovi comunque — i finecorsa software verranno ignorati.",homeZ:"Azzeramento automatico",moveAnyway:"Muovi comunque",homingStarted:"Azzeramento automatico in corso…"},permission:{noAdd:"Non hai il permesso di aggiungere stampanti",noEdit:"Non hai il permesso di modificare stampanti",noDelete:"Non hai il permesso di eliminare stampanti",noControl:"Non hai il permesso di controllare stampanti",noFiles:"Non hai il permesso di accedere ai file stampante",noAmsRfid:"Non hai il permesso di rileggere AMS RFID",noSmartPlugControl:"Non hai il permesso di controllare smart plug",noCamera:"Non hai il permesso di visualizzare le telecamere"},modal:{addTitle:"Aggiungi Stampante",editTitle:"Modifica Stampante",myPrinter:"La mia Stampante",selectModel:"Seleziona modello...",locationGroup:"Posizione / Gruppo (opzionale)",locationPlaceholder:"es. Officina, Ufficio, Cantina",autoArchiveLabel:"Archivia automaticamente stampe completate",fromPrinterSettings:"Dalle impostazioni della stampante",modelOptional:"Modello (opzionale)",saveChanges:"Salva modifiche"},skipObjects:{tooltip:"Salta oggetti",onlyWhilePrinting:"Salta oggetti (solo durante la stampa)",requiresMultiple:"Salta oggetti (richiede 2+ oggetti)",title:"Salta Oggetti",matchIdsInfo:"Abbina gli ID con il display della stampante",printerShowsIds:"Lo schermo mostra gli ID oggetto sul piatto",skipSelected:"Salta selezionati",skipping:"Saltando...",noObjectsSelected:"Nessun oggetto selezionato",selectObjectsToSkip:"Seleziona gli oggetti da saltare nella stampa corrente",skipped:"saltato",objectsSkipped:"Oggetti saltati",activeCount:"{{count}} attivi",waitForLayer:"Attendi il layer 2+ per saltare oggetti (attualmente layer {{layer}})",skip:"Salta",confirmTitle:"Saltare oggetto?",confirmMessage:'Sei sicuro di voler saltare "{{name}}"? Questa azione non può essere annullata.'},confirm:{deleteTitle:"Elimina Stampante",deleteMessage:'Sei sicuro di eliminare "{{name}}"? Questo rimuoverà tutte le impostazioni di connessione.',deleteArchivesNote:"Tutta la cronologia di stampa sarà eliminata definitivamente.",keepArchivesNote:"La cronologia sarà mantenuta ma non più associata a questa stampante.",stopTitle:"Ferma Stampa",stopMessage:'Sei sicuro di fermare la stampa corrente su "{{name}}"? Questo annullerà il lavoro di stampa.',stopButton:"Ferma Stampa",pauseTitle:"Pausa Stampa",pauseMessage:'Sei sicuro di mettere in pausa la stampa corrente su "{{name}}"?',pauseButton:"Pausa Stampa",resumeTitle:"Riprendi Stampa",resumeMessage:'Sei sicuro di riprendere la stampa su "{{name}}"?',resumeButton:"Riprendi Stampa",powerOnTitle:"Accendi Stampante",powerOnMessage:'Sei sicuro di accendere "{{name}}"?',powerOnButton:"Accendi",powerOffTitle:"Spegni Stampante",powerOffMessage:'Sei sicuro di spegnere "{{name}}"?',powerOffWarning:'AVVISO: "{{name}}" sta stampando! Sei sicuro di spegnere? Questo interromperà la stampa e potrebbe danneggiare la stampante.',powerOffButton:"Spegni"},bulk:{select:"Seleziona",selectAll:"Seleziona tutto",selectByLocation:"Seleziona per posizione",selected:"{{count}} selezionato/i",actions:{stop:"Ferma",pause:"Pausa",resume:"Riprendi",clearPlate:"Svuota piano",clearHMS:"Cancella notifiche"},confirm:{stopTitle:"Ferma {{count}} stampe",stopMessage:"Questo annullerà le stampe attive su {{count}} stampante/i. Questa azione non può essere annullata.",stopButton:"Ferma tutte",pauseTitle:"Pausa {{count}} stampe",pauseMessage:"Questo metterà in pausa le stampe attive su {{count}} stampante/i.",pauseButton:"Pausa tutte",clearPlateTitle:"Svuota {{count}} piani di stampa",clearPlateMessage:"Questo svuoterà il piano di stampa su {{count}} stampante/i e potrebbe avviare i lavori in coda.",clearPlateButton:"Svuota tutti"},success:"{{action}} completato su {{count}} stampante/i",partial:"{{succeeded}} riuscito/i, {{failed}} fallito/i",noneApplicable:"Nessuna stampante selezionata è nello stato corretto per questa azione",selectByState:"Seleziona per stato"},discovery:{title:"Trova Stampanti",searching:"Ricerca...",scanning:"Scansione...",scanProgress:"Scansione... {{scanned}}/{{total}}",foundPrinters:"Trovate {{count}} stampante(i)",noPrintersFound:"Nessuna stampante trovata",noPrintersFoundSubnet:"Nessuna stampante trovata nella sottorete specificata.",noPrintersFoundNetwork:"Nessuna stampante trovata sulla rete.",allConfigured:"Tutte le stampanti trovate sono già configurate.",alreadyAdded:"Già aggiunta",select:"Seleziona",manualEntry:"Inserimento manuale",addFromCloud:"Aggiungi da Cloud",subnetToScan:"Sottorete da scansionare",dockerNote:"Docker rilevato. Inserisci la sottorete della stampante in notazione CIDR. Richiede network_mode: host in docker-compose.yml.",scanSubnet:"Scansiona sottorete per stampanti",discoverNetwork:"Trova stampanti in rete",scanningSubnet:"Scansione sottorete per stampanti Bambu...",scanningNetwork:"Scansione rete...",serialRequired:"Seriale richiesto",unknown:"Sconosciuto",failedToStart:"Avvio ricerca non riuscito"},drying:{start:"Avvia essiccazione",stop:"Ferma essiccazione",temperature:"Temperatura",duration:"Durata",hours:"ore",timeRemaining:"{{time}} rimanente",active:"Essiccazione",notSupported:"Essiccazione non supportata",powerRequired:"Collegare l'alimentatore AMS per abilitare l'asciugatura",startingDrying:"Avvio essiccazione...",stoppingDrying:"Arresto essiccazione...",rotateTray:"Ruota la bobina durante l'essiccazione"},filaments:"Filamenti",openCameraOverlay:"Apri overlay camera",openCameraWindow:"Apri camera in nuova finestra",firmwareUpdateAvailable:"Aggiornamento firmware disponibile: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Aggiornato",firmwareUpdateButton:"Aggiorna",plateDetection:{noPermission:"Non hai il permesso di aggiornare le stampanti",enabledClick:"Controllo piatto abilitato - Clicca per disabilitare",disabledClick:"Controllo piatto disabilitato - Clicca per abilitare",manageCalibration:"Gestisci calibrazione rilevamento piatto",calibrationRequired:"Calibrazione richiesta",calibrationInstructions:"Assicurati che il piatto sia <strong>completamente vuoto</strong>, poi clicca Calibra.",calibrationDescription:"La calibrazione salva un'immagine di riferimento del piatto vuoto. I controlli futuri confronteranno con questo riferimento per rilevare oggetti.",calibrationTip:"<strong>Suggerimento:</strong> Puoi salvare fino a 5 calibrazioni per piatti diversi. Il sistema usa automaticamente la migliore corrispondenza durante il controllo.",plateEmpty:"Il piatto sembra vuoto",objectsDetected:"Oggetti rilevati sul piatto",confidence:"Confidenza",difference:"Differenza",analysisPreview:"Anteprima analisi:",analysisLegend:"Riquadro verde = area rilevamento, overlay rosso = differenze dalla calibrazione",savedReferences:"Riferimenti salvati ({{count}}/{{max}})",deleteReference:"Elimina riferimento",labelPlaceholder:"Etichetta...",clickToEdit:"{{label}} - Clicca per modificare",clickToAddLabel:"Clicca per aggiungere etichetta"},speed:{title:"Velocità di stampa",silent:"Silenzioso (50%)",standard:"Standard (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Modalità condotto d'aria",cooling:"Raffreddamento",heating:"Riscaldamento"},noSdCard:"Nessuna SD",door:{open:"Aperta",closed:"Chiusa"},fans:{partCooling:"Ventola raffreddamento parte",auxiliary:"Ventola ausiliaria",chamber:"Ventola camera"},clickToViewHmsErrors:"Clicca per vedere errori HMS",estimatedCompletion:"Tempo completamento stimato",plateNumber:"Piastra {{number}}",slotOptions:"Opzioni slot",amsPopup:{friendlyName:"Nome AMS",friendlyNamePlaceholder:"es. Nome AMS amichevole",serialNumber:"Numero di serie",firmwareVersion:"Firmware",save:"Salva",clear:"Cancella",noEditPermission:"Non hai il permesso di rinominare le unità AMS"},firmwareModal:{title:"Aggiornamento Firmware",titleUpToDate:"Info Firmware",currentVersion:"Corrente:",latestVersion:"Ultima:",releaseNotes:"Note di rilascio",checkingPrereqs:"Controllo prerequisiti...",sdCardReady:"SD pronta. Clicca sotto per caricare firmware.",uploadedSuccess:"Firmware caricato su SD!",applyInstructions:"Per applicare l'aggiornamento sulla stampante:",step1:"Sul touchscreen della stampante, vai a <strong>Impostazioni</strong>",step2:"Vai a <strong>Firmware</strong>",step3:"Seleziona <strong>Aggiorna da SD</strong>",step4:"L'aggiornamento richiede 10-20 minuti",done:"Fatto",starting:"Avvio...",uploadFirmware:"Carica Firmware",uploadFailed:"Avvio caricamento fallito: {{error}}",uploadedToast:"Firmware caricato! Avvia aggiornamento dal display.",availableVersions:"Versioni disponibili",usable:"Utilizzabile",unavailable:"Non disponibile",installed:"Installato",newerBadge:"più recente",olderBadge:"più vecchio",currentBadge:"attuale"},accessCodePlaceholder:"Lascia vuoto per mantenere quello attuale",roi:{title:"Area di rilevamento (ROI)",xStart:"X Inizio",yStart:"Y Inizio",width:"Larghezza",height:"Altezza",instruction:"Regola l'area di rilevamento per focalizzare il piatto. Il riquadro verde mostra l'area corrente."},developerModeWarning:"La modalità sviluppatore LAN non è attivata su: {{names}}. Alcune funzionalità potrebbero non funzionare.",howToEnable:"Come attivare",incompatibleFile:"Questo file è stato preparato per {{slicedFor}}, ma questa stampante è una {{printerModel}}",dropNotPrintable:"Solo i file .gcode e .gcode.3mf possono essere stampati",dropToPrint:"Rilascia per stampare",cannotPrint:"Stampante occupata"},archives:{title:"Archivi di stampa",searchPlaceholder:"Cerca archivi...",filterByPrinter:"Filtra per stampante",filterByStatus:"Filtra per stato",sortBy:"Ordina per",sortNewest:"Più recenti",sortOldest:"Meno recenti",sortName:"Nome",sortDuration:"Durata",sortLargest:"Più grandi",sortSmallest:"Più piccoli",sortSize:"Dimensione",noArchives:"Nessun archivio trovato",noArchivesSearch:"Nessun archivio corrisponde alla ricerca",originalPrintNotVisible:"Stampa originale non visibile - prova a rimuovere i filtri",noArchivesYet:"Nessun archivio ancora",prints:"stampe",pagination:{showing:"Mostrando",to:"a",of:"di",show:"Mostra",page:"Pagina",all:"Tutti"},loadingArchives:"Caricamento archivi...",releaseToUpload:"Rilascia per caricare",showAll:"Mostra tutti",showFavoritesOnly:"Solo preferiti",gridView:"Vista griglia",listView:"Vista elenco",calendarView:"Vista calendario",logView:"Registro stampe",manageTags:"Gestisci tag",showFailedPrints:"Mostra stampe fallite",hideFailedPrints:"Nascondi stampe fallite",hideDuplicates:"Nascondi duplicati",viewOriginalPrint:"Fai clic per visualizzare la stampa originale (#{{id}})",printTime:"Tempo di stampa",filamentUsed:"Filamento usato",cost:"Costo",reprint:"Ristampa",preview:"Anteprima",deleteArchive:"Elimina archivio",deleteConfirm:"Sei sicuro di eliminare questo archivio?",favorite:"Preferito",unfavorite:"Rimuovi dai preferiti",viewDetails:"Vedi dettagli",status:{completed:"Completato",failed:"Fallito",stopped:"Fermato"},toast:{source3mfAttached:"Sorgente 3MF allegata: {{filename}}",failedUploadSource3mf:"Caricamento sorgente 3MF non riuscito",source3mfRemoved:"Sorgente 3MF rimossa",failedRemoveSource3mf:"Rimozione sorgente 3MF non riuscita",f3dAttached:"F3D allegato: {{filename}}",failedUploadF3d:"Caricamento F3D non riuscito",f3dRemoved:"F3D rimosso",failedRemoveF3d:"Rimozione F3D non riuscita",timelapseAttached:"Timelapse allegato: {{filename}}",timelapseAlreadyAttached:"Timelapse già allegato",noMatchingTimelapse:"Nessun timelapse corrispondente",failedScanTimelapse:"Scansione timelapse non riuscita",failedAttachTimelapse:"Allegato timelapse non riuscito",timelapseRemoved:"Timelapse rimosso",failedRemoveTimelapse:"Impossibile rimuovere il timelapse",timelapseUploaded:"Timelapse caricato: {{filename}}",failedUploadTimelapse:"Impossibile caricare il timelapse",archiveDeleted:"Archivio eliminato",failedDeleteArchive:"Eliminazione archivio non riuscita",addedToFavorites:"Aggiunto ai preferiti",removedFromFavorites:"Rimosso dai preferiti",projectUpdated:"Progetto aggiornato",failedUpdateProject:"Aggiornamento progetto non riuscito",linkCopied:"Link copiato negli appunti",failedCopyLink:"Copia link non riuscita",photoDeleted:"Foto eliminata",failedDeletePhoto:"Eliminazione foto non riuscita",failedDeleteArchives:"Eliminazione archivi non riuscita",failedUpdateFavorites:"Aggiornamento preferiti non riuscito",exportDownloaded:"Export scaricato",exportFailed:"Export non riuscito"},menu:{print:"Stampa",schedule:"Programma",openInBambuStudio:"Apri nello slicer",slice:"Slice",externalLink:"Link esterno",viewOnMakerWorld:"Vedi su MakerWorld",preview3d:"Anteprima 3D",viewTimelapse:"Vedi Timelapse",scanForTimelapse:"Cerca Timelapse",uploadTimelapse:"Carica timelapse",removeTimelapse:"Rimuovi timelapse",downloadSource3mf:"Scarica Sorgente 3MF",uploadSource3mf:"Carica Sorgente 3MF",replaceSource3mf:"Sostituisci Sorgente 3MF",removeSource3mf:"Rimuovi Sorgente 3MF",uploadF3d:"Carica F3D",replaceF3d:"Sostituisci F3D",downloadF3d:"Scarica F3D",removeF3d:"Rimuovi F3D",download:"Scarica",copyDownloadLink:"Copia link download",qrCode:"QR Code",viewPhotos:"Vedi foto",viewPhotosCount:"Vedi foto ({{count}})",projectPage:"Pagina progetto",addToFavorites:"Aggiungi ai preferiti",removeFromFavorites:"Rimuovi dai preferiti",edit:"Modifica",goToProject:"Vai al progetto: {{name}}",addToProject:"Aggiungi al progetto",removeFromProject:"Rimuovi dal progetto",loading:"Caricamento...",noProjectsAvailable:"Nessun progetto disponibile",searchProjects:"Search projects…",select:"Seleziona",deselect:"Deseleziona",delete:"Elimina"},permission:{noReprint:"Non hai il permesso di ristampare questo archivio",noAddToQueue:"Non hai il permesso di aggiungere alla coda",noUpdateArchives:"Non hai il permesso di aggiornare archivi",noUploadFiles:"Non hai il permesso di caricare file",noDownload:"Non hai il permesso di scaricare archivi",noCopyLink:"Non hai il permesso di copiare link download",noDelete:"Non hai il permesso di eliminare questo archivio",noCreate:"Non hai il permesso di creare archivi"},platePicker:{title:"Seleziona la piastra da visualizzare",hint:"Questo archivio contiene più piastre. Scegline una da aprire nel visualizzatore GCode.",plateLabel:"Piastra {{index}}",objectCount:"{{count}} oggetto",objectCount_plural:"{{count}} oggetti",noGcode:"Questo archivio non contiene G-code generato da visualizzare. Aprilo prima in Bambu Studio per sezionarlo."},card:{previousPlate:"Piatto precedente",nextPlate:"Piatto successivo",plateNumber:"Piatto {{index}}",moreOptions:"Clic destro per altre opzioni",addToFavorites:"Aggiungi ai preferiti",removeFromFavorites:"Rimuovi dai preferiti",cancelled:"annullato",failed:"fallito",duplicate:"duplicato",duplicateTitle:"Questo modello è stato stampato prima",openSource3mf:"Apri sorgente 3MF in Bambu Studio (clic destro per altre opzioni)",downloadF3d:"Scarica file design Fusion 360",viewTimelapse:"Vedi timelapse",viewPhoto:"Vedi 1 foto",viewPhotos:"Vedi {{count}} foto",openFolder:"Apri cartella: {{name}}",slicedFile:"File slice - pronto a stampare",sourceFile:"Solo file sorgente - nessuna mappatura AMS disponibile",gcode:"GCODE",source:"SOURCE",project:"Progetto: {{name}}",estimated:"Stimato: {{time}}",actual:"Reale: {{time}}",accuracy:"Accuratezza: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} strato",layers:"{{count}} strati",object:"{{count}} oggetto",objects:"{{count}} oggetti",slicedFor:"Sliced per {{model}}",uploadedBy:"Caricato da",noPermissionReprint:"Non hai il permesso di ristampare",noFileForReprint:"Nessun file 3MF disponibile — il file non è stato scaricato dalla stampante durante la registrazione",noPermissionEdit:"Non hai il permesso di modificare archivi",noPermissionDelete:"Non hai il permesso di eliminare archivi",reprint:"Ristampa",schedulePrint:"Programma Stampa",schedule:"Programma",openInBambuStudio:"Apri nello slicer",openInBambuStudioToSlice:"Apri nello slicer per slicing",slice:"Slice",externalLink:"Link esterno",makerWorld:"MakerWorld: {{designer}}",viewProject:"Vedi progetto",noExternalLink:"Nessun link esterno",preview3d:"Anteprima 3D",download:"Scarica",edit:"Modifica",delete:"Elimina"},modal:{deleteArchive:"Elimina Archivio",deleteConfirm:'Sei sicuro di eliminare "{{name}}"? Questa azione non può essere annullata.',deleteButton:"Elimina",removeSource3mf:"Rimuovi Sorgente 3MF",removeSource3mfConfirm:'Sei sicuro di rimuovere il file sorgente 3MF da "{{name}}"? Questo eliminerà il progetto slicer originale.',removeButton:"Rimuovi",removeF3d:"Rimuovi F3D",removeF3dConfirm:'Sei sicuro di rimuovere il file Fusion 360 da "{{name}}"?',removeTimelapse:"Rimuovi timelapse",removeTimelapseConfirm:'Sei sicuro di voler rimuovere il video timelapse da "{{name}}"?',timelapse:"{{name}} - Timelapse",selectTimelapse:"Seleziona Timelapse",selectTimelapseDesc:"Nessun abbinamento automatico trovato. Seleziona il timelapse per questa stampa:",deleteArchives:"Elimina Archivi",deleteArchivesConfirm:"Sei sicuro di eliminare {{count}} archivio(i)? Questa azione non può essere annullata.",deleteCount:"Elimina {{count}}"},page:{title:"Archivi",printsCount:"{{filtered}} di {{total}} stampe",dropFilesHere:"Rilascia file .3mf qui",releaseToUpload:"Rilascia per caricare",only3mfSupported:"Solo file .3mf supportati",close:"Chiudi",selected:"{{count}} selezionati",selectAll:"Seleziona tutto",tags:"Tag",project:"Progetto",favorite:"Preferito",delete:"Elimina",toggledFavorites:"Preferiti aggiornati per {{count}} archivio(i)",failedUpdateFavorites:"Aggiornamento preferiti non riuscito",archivesDeleted:"{{count}} archivio(i) eliminati",failedDeleteArchives:"Eliminazione archivi non riuscita",photoDeleted:"Foto eliminata",failedDeletePhoto:"Eliminazione foto non riuscita"},list:{name:"Nome",printer:"Stampante",date:"Data",size:"Dimensione",actions:"Azioni",hasTimelapse:"Ha timelapse"},log:{date:"Data",printName:"Nome stampa",printer:"Stampante",user:"Utente",status:"Stato",duration:"Durata",filament:"Filamento",allPrinters:"Tutte le stampanti",allUsers:"Tutti gli utenti",allStatuses:"Tutti gli stati",cancelled:"Annullato",skipped:"Saltato",dateFrom:"Dal",dateTo:"Al",noEntries:"Nessuna voce di registro trovata",showing:"{{count}} di {{total}} voci",rowsPerPage:"Righe",page:"Pagina",prev:"Prec.",next:"Succ.",clearLog:"Cancella registro",clearLogTitle:"Cancella registro stampe",clearLogConfirm:"Tutte le voci del registro di stampa verranno eliminate permanentemente. Gli archivi e gli elementi della coda non sono interessati. Questa azione non può essere annullata. Sei sicuro?",clearLogButton:"Cancella tutto",cleared:"{{count}} voci di registro cancellate",clearFailed:"Impossibile cancellare il registro stampe"}},queue:{title:"Coda di stampa",subtitle:"Programma e gestisci i tuoi lavori di stampa",addToQueue:"Aggiungi alla coda",print:"Stampa",reprint:"Ristampa",schedulePrint:"Programma Stampa",editQueueItem:"Modifica elemento coda",printToPrinters:"Stampa su {{count}} Stampanti",queueToPrinters:"Metti in coda su {{count}} Stampanti",queueSelectedPlates:"Metti in coda {{count}} piastre",selectAllPlates:"Seleziona tutte le {{count}} piastre",deselectAll:"Deseleziona tutto",printQueued:"Stampa in coda",itemsQueued:"{{count}} elementi in coda",sending:"Invio...",sendingProgress:"Invio {{current}}/{{total}}...",adding:"Aggiunta...",addingProgress:"Aggiunta {{current}}/{{total}}...",savingProgress:"Salvataggio {{current}}/{{total}}...",clearQueue:"Svuota coda",clearHistory:"Svuota cronologia",emptyQueue:"La coda è vuota",position:"Posizione",scheduledTime:"Ora programmata",moveUp:"Sposta su",moveDown:"Sposta giù",startNow:"Avvia ora",printingInProgress:"Stampa in corso...",viewArchive:"Vedi archivio",viewInFileManager:"Vedi nel Gestore file",itemCount:"{{count}} elemento",itemCount_plural:"{{count}} elementi",dragToReorder:"Trascina per riordinare (solo ASAP)",reorderHint:"La posizione influisce solo sugli elementi ASAP. Quelli programmati partono all'orario.",sjf:{label:"SJF",tooltip:"Lavoro più breve prima — lo scheduler dà priorità alle stampe più brevi"},addedBy:"Aggiunto da {{name}}",nextInQueue:"Prossimo in coda",clearPlateSuccess:"Piatto liberato — pronto per la prossima stampa",plateNumber:"Piatto {{index}}",quantity:"Quantità",quantityHint:"Crea {{count}} elementi in coda",activeBatches:"Lotti attivi",batchProgress:"{{completed}} di {{total}} completati",cancelBatch:"Annulla rimanenti",batchCancelled:"Elementi rimanenti del lotto annullati",cancelBatchConfirmTitle:"Annulla lotto",cancelBatchConfirmMessage:"Annullare tutti gli elementi in sospeso rimanenti in questo lotto?",batch:"Lotto",sections:{currentlyPrinting:"In stampa",queued:"In coda",history:"Cronologia"},status:{pending:"In attesa",waiting:"In attesa",printing:"In stampa",paused:"In pausa",completed:"Completato",failed:"Fallito",skipped:"Saltato",cancelled:"Annullato"},summary:{printing:"In stampa",queued:"In coda",totalTime:"Tempo totale coda",totalWeight:"Peso totale della coda",history:"Cronologia"},filter:{allPrinters:"Tutte le stampanti",unassigned:"Non assegnato",allStatus:"Tutti gli stati",allLocations:"Tutte le posizioni",any:"Qualsiasi"},sort:{byPosition:"Ordina per posizione",byName:"Ordina per nome",byPrinter:"Ordina per stampante",bySchedule:"Ordina per programma",byDate:"Ordina per data",ascendingOldest:"Crescente (più vecchi)",descendingNewest:"Decrescente (più recenti)"},badges:{staged:"In staging",requiresPrevious:"Richiede successo precedente",autoPowerOff:"Spegnimento automatico",gcodeInjection:"G-code"},empty:{title:"Nessuna stampa programmata",description:`Programma una stampa dalla pagina Archivi usando l'opzione "Programma" nel menu contestuale, o trascina i file per iniziare.`},time:{asap:"ASAP",overdue:"Scaduto",now:"Ora",lessThanMinute:"Tra meno di un minuto",inMinutes:"Tra {{count}} min",inHours:"Tra {{count}} ore"},actions:{stopPrint:"Ferma Stampa",startPrint:"Avvia Stampa",requeue:"Rimetti in coda"},bulkEdit:{title:"Modifica {{count}} elemento",title_plural:"Modifica {{count}} elementi",description:"Solo le impostazioni modificate saranno applicate agli elementi selezionati.",printer:"Stampante",noChange:"— Nessun cambio —",queueOptions:"Opzioni coda",staged:"In staging (avvio manuale)",autoPowerOff:"Spegnimento automatico dopo stampa",requirePrevious:"Richiede successo precedente",printOptions:"Opzioni stampa",bedLevelling:"Livellamento piatto",flowCalibration:"Calibrazione flusso",vibrationCalibration:"Calibrazione vibrazioni",layerInspection:"Controllo primo layer",timelapse:"Timelapse",useAms:"Usa AMS",applyChanges:"Applica modifiche",selectAll:"Seleziona tutto",deselectAll:"Deseleziona tutto",selected:"{{count}} selezionati",editSelected:"Modifica selezionati",cancelSelected:"Annulla selezionati"},confirm:{cancelTitle:"Annulla stampa programmata",cancelMessage:'Sei sicuro di annullare "{{name}}"?',stopTitle:"Ferma Stampa",stopMessage:'Sei sicuro di fermare la stampa corrente "{{name}}"? Questo annullerà il lavoro sulla stampante.',removeTitle:"Rimuovi dalla cronologia",removeMessage:'Sei sicuro di rimuovere "{{name}}" dalla cronologia coda?',clearHistoryTitle:"Svuota cronologia",clearHistoryMessage:"Sei sicuro di rimuovere {{count}} elemento(i) dalla cronologia?",cancelButton:"Annulla Stampa",stopButton:"Ferma Stampa",thisPrint:"questa stampa",thisItem:"questo elemento"},toast:{cancelled:"Elemento coda annullato",cancelFailed:"Annullamento non riuscito",removed:"Elemento coda rimosso",removeFailed:"Rimozione non riuscita",stopped:"Stampa fermata",stopFailed:"Impossibile fermare stampa",released:"Stampa rilasciata in coda",startFailed:"Avvio stampa non riuscito",reorderFailed:"Riordino coda non riuscito",historyCleared:"Cancellati {{count}} elementi cronologia",clearHistoryFailed:"Svuotamento cronologia non riuscito",updateFailed:"Aggiornamento elementi non riuscito",bulkCancelled:"Annullati {{count}} elementi",bulkCancelFailed:"Annullamento elementi non riuscito"},timeline:{listView:"Lista",timelineView:"Cronologia",unassigned:"Non assegnato",noData:"Nessuna stampa programmata per questo giorno",allDoneBy:"Tutte le stampe completate entro le {{time}}",staged:"In attesa",filterAll:"Mostra tutto",filterPrinting:"In stampa",filterQueued:"In coda",time:{anyMoment:"a momenti",minutesLeft:"{{minutes}}m rimanenti",hoursLeft:"{{hours}}h rimanenti",hoursMinutesLeft:"{{hours}}h {{minutes}}m rimanenti"},day:{previous:"Giorno precedente",next:"Giorno successivo",today:"Oggi"}},permissions:{noStopPrint:"Non hai il permesso di fermare stampe",noStartPrint:"Non hai il permesso di avviare stampe",noEdit:"Non hai il permesso di modificare questo elemento coda",noCancel:"Non hai il permesso di annullare questo elemento coda",noRequeue:"Non hai il permesso di rimettere in coda elementi",noRemove:"Non hai il permesso di rimuovere questo elemento coda",noClearHistory:"Non hai il permesso di svuotare tutta la cronologia",noEditItems:"Non hai il permesso di modificare elementi coda",noCancelItems:"Non hai il permesso di annullare elementi coda"}},backgroundDispatch:{unknownFile:"File sconosciuto",unknownPrinter:"Stampante sconosciuta",startingPrints:"Avvio stampe",progressSummary:"{{complete}}/{{total}} completati • Inviati: {{dispatched}} • In elaborazione: {{processing}}",expandDetails:"Espandi dettagli dispatch",collapseDetails:"Comprimi dettagli dispatch",dismissToast:"Chiudi notifica dispatch",cancelDispatchJob:"Annulla job dispatch",cancel:"Annulla",cancelling:"Annullamento…",awaitingPrinter:"In attesa della stampante…",status:{dispatched:"Inviato",processing:"In elaborazione",completed:"Completato",failed:"Fallito",cancelled:"Annullato"},toast:{cancellingUpload:"Annullamento upload...",cancelled:"Dispatch annullato",cancelFailed:"Impossibile annullare il dispatch",completeWithFailures:"Dispatch in background completato: {{completed}} riusciti, {{failed}} falliti",completeSuccess:"Dispatch in background completato: {{completed}} riusciti",printStartedRemaining:"{{completed}} stampa/e avviata/e, {{remaining}} in invio..."}},stats:{title:"Dashboard",subtitle:"Trascina i widget per riordinare. Clicca l'icona occhio per nascondere.",overview:"Panoramica",totalPrints:"Stampe totali",successRate:"Tasso di successo",totalPrintTime:"Tempo totale di stampa",printTime:"Tempo di stampa",totalFilament:"Filamento totale usato",filamentUsed:"Filamento usato",filamentCost:"Costo filamento",totalCost:"Costo totale",energyUsed:"Energia usata",energyCost:"Costo energia",energyWarmingUpTooltip:"Il tracciamento energia sta ancora raccogliendo snapshot orari. I totali per intervallo diventeranno accurati quando esisterà almeno uno snapshot prima dell’intervallo selezionato. I primi valori potrebbero essere sottostimati.",averagePrintTime:"Tempo medio di stampa",printsPerDay:"Stampe al giorno",byPrinter:"Per stampante",printsByPrinter:"Stampe per stampante",byMaterial:"Per materiale",byMonth:"Per mese",last7Days:"Ultimi 7 giorni",last30Days:"Ultimi 30 giorni",last90Days:"Ultimi 90 giorni",allTime:"Sempre",quickStats:"Statistiche rapide",printActivity:"Attivita di stampa",filamentTypes:"Tipi di filamento",filamentTrends:"Trend filamento",failureAnalysis:"Analisi guasti",timeAccuracy:"Accuratezza tempo",successful:"Riuscite:",failed:"Fallite:",perfectEstimate:"100% = stima perfetta",noTimeAccuracyData:"Nessun dato accuratezza tempo",noFilamentData:"Nessun dato filamento",noPrinterData:"Nessun dato stampante",noPrintData:"Nessun dato stampa",noPrintDataLast30Days:"Nessun dato stampa negli ultimi 30 giorni",failureReasons:"Cause guasto",topFailureReasons:"Cause principali",failedPrintsCount:"{{failed}} / {{total}} stampe fallite",lastWeekRate:"Settimana scorsa: {{rate}}%",resetLayout:"Reimposta layout",recalculateCosts:"Ricalcola costi",recalculateCostsHint:"Ricalcola tutti i costi archivi usando i prezzi filamento correnti",exportStats:"Esporta statistiche",exportAsCsv:"Esporta come CSV",exportAsExcel:"Esporta come Excel",hiddenCount:"{{count}} Nascosti",exportDownloaded:"Export scaricato",exportFailed:"Export non riuscito",layoutReset:"Layout reimpostato",recalculatedCosts:"Costi ricalcolati per {{count}} archivi",recalculateFailed:"Ricalcolo costi non riuscito",loadingStats:"Caricamento statistiche...",noPermissionResetLayout:"Non hai il permesso di reimpostare il layout",noPermissionRecalculate:"Non hai il permesso di ricalcolare i costi",noPrintDataInRange:"Nessun dato nel periodo selezionato",periodFilament:"Filamento utilizzato",periodCost:"Costo",avgPerPrint:"Media per stampa",usageOverTime:"Utilizzo nel tempo",filamentByWeight:"Peso",printDuration:"Durata stampa",printerUtilization:"Utilizzo stampante",filamentSuccess:"Successo per materiale",printHabits:"Abitudini di stampa",printTimeOfDay:"Ora di stampa",colorDistribution:"Distribuzione colori",noColorData:"Nessun dato colore disponibile",records:"Record",longestPrint:"Stampa più lunga",heaviestPrint:"Stampa più pesante",mostExpensivePrint:"Più costosa",busiestDay:"Giorno più attivo",successStreak:"Serie di successi",streakPrint:"stampa consecutiva",streakPrints:"{{count}} stampe consecutive",printerStats:"Statistiche stampante",hours:"ore",avgPrints:"Media stampe",noArchiveData:"Nessun dato di stampa disponibile",filamentByTime:"Tempo",avgWeight:"Media peso",avgTime:"Media tempo",filamentByPrints:"Stampe",timeframe:{today:"Oggi","this-week":"Questa settimana","this-month":"Questo mese","last-7":"Ultimi 7 giorni","last-30":"Ultimi 30 giorni","last-90":"Ultimi 90 giorni","this-year":"Quest'anno","all-time":"Tutto",custom:"Personalizzato",from:"Da",to:"A"},allUsers:"Tutti gli utenti",noUser:"Nessun utente (Sistema)",filterByUser:"Filtra per utente"},maintenance:{title:"Manutenzione",overview:"Panoramica",allOk:"Tutta la manutenzione aggiornata",dueCount:"{{count}} elemento in scadenza",dueCount_plural:"{{count}} elementi in scadenza",warningCount:"{{count}} avviso",warningCount_plural:"{{count}} avvisi",totalPrintTime:"Tempo totale di stampa",nextMaintenance:"Prossima manutenzione",nothingDue:"Niente in scadenza",tasks:"Attivita",lastPerformed:"Ultima esecuzione",interval:"Intervallo",hoursRemaining:"{{hours}}h rimanenti",hoursOverdue:"{{hours}}h in ritardo",markDone:"Segna come fatto",performMaintenance:"Esegui manutenzione",history:"Cronologia",noHistory:"Nessuna cronologia manutenzione",editPrintHours:"Modifica ore stampa",currentHours:"Ore attuali",statusTab:"Stato",settingsTab:"Impostazioni",overdueCount:"{{count}} in ritardo",dueSoonCount:"{{count}} in scadenza",dueSoon:"In scadenza",allGood:"Tutto ok",overdueBy:"In ritardo di {{duration}}",dueIn:"Scade tra {{duration}}",timeLeft:"{{duration}} rimanenti",day:"1 giorno",days:"{{count}} giorni",week:"1 settimana",weeks:"{{count}} settimane",month:"1 mese",months:"{{count}} mesi",year:"1 anno",maintenanceTypes:"Tipi di manutenzione",maintenanceTypesDescription:"Tipi di sistema e tue attivita personalizzate",addCustomType:"Aggiungi tipo personalizzato",restoreDefaults:"Ripristina attivita predefinite",intervalType:"Tipo intervallo",intervalValue:"Intervallo ({{type}})",icon:"Icona",documentationLink:"Link documentazione (opzionale)",assignToPrinters:"Assegna alle stampanti",selectAtLeastOnePrinter:"Seleziona almeno una stampante",addType:"Aggiungi tipo",custom:"Personalizzato",printHours:"Ore di stampa",calendarDays:"Giorni calendario",exampleName:"es. Sostituisci filtro HEPA",viewDocumentation:"Vedi documentazione",timeBasedInterval:"Intervallo basato sul tempo",intervalOverrides:"Override intervallo",intervalOverridesDescription:"Personalizza intervalli per stampanti specifiche",assignedToPrinters:"Assegnato alle stampanti:",noPrintersAssigned:"Nessuna stampante assegnata",addPrinterShort:"Aggiungi:",printersAssignedClick:"{{count}} stampante(i) assegnata - clicca per gestire",removeFromPrinter:"Rimuovi da questa stampante",types:{lubricateCarbonRods:"Lubrifica aste in carbonio",lubricateRails:"Lubrifica guide lineari",cleanNozzle:"Pulisci ugello/Hotend",checkBelts:"Controlla tensione cinghie",cleanBuildPlate:"Pulisci piatto",checkExtruder:"Controlla ingranaggi estrusore",checkCooling:"Controlla ventole raffreddamento",generalInspection:"Ispezione generale",cleanCarbonRods:"Pulisci aste in carbonio",lubricateSteelRods:"Lubrifica aste in acciaio",cleanSteelRods:"Pulisci aste in acciaio",cleanLinearRails:"Pulisci guide lineari",checkPtfeTube:"Controlla tubo PTFE",replaceHepaFilter:"Sostituisci filtro HEPA",replaceCarbonFilter:"Sostituisci filtro carbone",lubricateLeftNozzleRail:"Lubrifica guida ugello sinistro"},maintenanceComplete:"Manutenzione segnata come completata",typeUpdated:"Tipo manutenzione aggiornato",typeDeleted:"Tipo manutenzione eliminato",defaultsRestored:"Ripristinate {{count}} attivita predefinite",printHoursUpdated:"Ore di stampa aggiornate",printerAssigned:"Stampante assegnata",printerRemoved:"Stampante rimossa",deleteTypeConfirm:'Eliminare "{{name}}"?',deleteSystemTypeTitle:"Eliminare attività di manutenzione predefinita?",deleteSystemTypeMessage:`Sei sicuro di voler eliminare l'attività di manutenzione predefinita "{{name}}"?`,noPermissionUpdate:"Non hai il permesso di aggiornare elementi manutenzione",noPermissionPerform:"Non hai il permesso di eseguire manutenzione",noPermissionEditTypes:"Non hai il permesso di modificare tipi manutenzione",noPermissionDeleteTypes:"Non hai il permesso di eliminare tipi manutenzione",noPermissionEditHours:"Non hai il permesso di modificare ore stampa",noPermissionRemovePrinter:"Non hai il permesso di rimuovere assegnazioni stampanti",noPermissionAssignPrinter:"Non hai il permesso di assegnare stampanti",noPermissionEditIntervals:"Non hai il permesso di modificare intervalli",configureSettings:"Configura tipi e intervalli manutenzione"},settings:{title:"Impostazioni",general:"Generale",tabs:{general:"Generale",smartPlugs:"Prese smart",notifications:"Notifiche",queue:"Workflow",filament:"Filamento",network:"Rete",apiKeys:"Chiavi API",virtualPrinter:"Stampante virtuale",failureDetection:"Rilevamento guasti",users:"Utenti",backup:"Backup",emailAuth:"Autenticazione Email",ldap:"LDAP",twoFa:"Autenticazione 2FA",oidc:"SSO / OIDC",spoolbuddy:"SpoolBuddy"},ldap:{title:"Autenticazione LDAP",enabledDesc:"L'autenticazione LDAP è attiva",disabledDesc:"L'autenticazione LDAP è disattivata",disabledHint:"Configura e salva le impostazioni LDAP qui sotto, poi attiva.",enabled:"Autenticazione LDAP attivata",disabled:"Autenticazione LDAP disattivata",feature1:"Gli utenti possono accedere con le credenziali LDAP",feature2:"L'account amministratore locale rimane come fallback",feature3:"I gruppi LDAP vengono mappati ai gruppi BamBuddy al login",serverConfig:"Configurazione server LDAP",serverUrl:"URL del server",serverUrlHint:"Usa ldap:// per standard o ldaps:// per connessioni SSL",security:"Sicurezza",securityHint:"StartTLS aggiorna una connessione semplice a TLS. LDAPS usa TLS fin dall'inizio.",bindDn:"Bind DN (account di servizio)",bindPassword:"Password Bind",searchBase:"Base DN di ricerca",userFilter:"Filtro di ricerca utente",userFilterHint:"{username} viene sostituito con il nome utente. Usa (uid={username}) per OpenLDAP.",autoProvision:"Provisioning automatico utenti",autoProvisionHint:"Crea automaticamente un account BamBuddy al primo accesso LDAP",defaultGroup:"Gruppo predefinito",defaultGroupNone:"— Nessuno (nessun fallback) —",defaultGroupHint:"Gruppo di fallback assegnato quando un utente LDAP si autentica ma non è presente in nessun gruppo LDAP mappato. Lascia vuoto per lasciare gli utenti non mappati senza autorizzazioni.",groupMapping:"Mappatura gruppi (JSON)",groupMappingHint:"Mappa i DN dei gruppi LDAP ai gruppi BamBuddy. Gruppi disponibili: ",testConnection:"Test connessione",settingsSaved:"Impostazioni LDAP salvate",errors:{serverRequired:"L'URL del server LDAP è obbligatorio",searchBaseRequired:"Il Base DN di ricerca è obbligatorio",enableAuthFirst:"Attiva prima l'autenticazione",configureLdapFirst:"Salva prima le impostazioni LDAP"}},email:{smtpSettings:"Configurazione SMTP",smtpHost:"Server SMTP",smtpPort:"Porta SMTP",security:"Sicurezza",authentication:"Autenticazione",username:"Nome utente",password:"Password",fromEmail:"Email mittente",fromName:"Nome mittente",testConnection:"Testa connessione SMTP",testRecipient:"Email destinatario test",sendTest:"Invia email di test",sending:"Invio...",save:"Salva impostazioni",saving:"Salvataggio...",advancedAuth:"Autenticazione avanzata",advancedAuthEnabled:"L'autenticazione avanzata è abilitata",advancedAuthEnabledDesc:"Le funzionalità di gestione utenti via email sono attive. I nuovi utenti riceveranno password generate automaticamente via email e potranno reimpostare la password tramite la funzione di recupero.",advancedAuthDisabled:"L'autenticazione avanzata è disabilitata",advancedAuthDisabledDesc:"Abilita l'autenticazione avanzata per attivare le funzionalità email per la gestione utenti.",enable:"Abilita",disable:"Disabilita",feature1:"Le password vengono generate automaticamente e inviate via email ai nuovi utenti",feature2:"Gli utenti possono accedere con nome utente o email",feature3:"La funzione di recupero password è disponibile",feature4:"Gli amministratori possono reimpostare le password utente via email",errors:{requiredFields:"Compilare tutti i campi obbligatori",usernameRequired:"Il nome utente è obbligatorio quando l'autenticazione è abilitata",enterTestEmail:"Inserire un indirizzo email di test",smtpServerAndEmail:"Compilare Server SMTP e Email mittente prima di testare",usernamePasswordRequired:"Nome utente e password sono obbligatori quando l'autenticazione è abilitata",configureSmtpFirst:"Configurare e testare le impostazioni SMTP prima",enableAuthFirst:"Per utilizzare le funzionalità basate sulla posta elettronica, è necessario prima abilitare l'autenticazione."},success:{settingsSaved:"Impostazioni SMTP salvate con successo"},securityOptions:{starttls:"STARTTLS (Porta 587)",ssl:"SSL/TLS (Porta 465)",none:"Nessuna (Porta 25)"},authOptions:{enabled:"Abilitata",disabled:"Disabilitata"}},appearance:"Aspetto",notifications:"Notifiche",smartPlugs:"Prese smart",spoolman:"Spoolman",updates:"Aggiornamenti",language:"Lingua",languageDescription:"Seleziona la lingua preferita",theme:"Tema",themeLight:"Chiaro",themeDark:"Scuro",themeSystem:"Sistema",defaultView:"Vista predefinita",defaultViewDescription:"Pagina da mostrare all'apertura dell'app",checkForUpdates:"Controlla aggiornamenti",autoUpdate:"Aggiornamento automatico",currentVersion:"Versione attuale",latestVersion:"Ultima versione",upToDate:"Sei aggiornato",updateAvailable:"Aggiornamento disponibile",notificationLanguage:"Lingua notifiche",notificationLanguageDescription:"Lingua per notifiche push",bedCooledThreshold:"Soglia raffreddamento piatto",bedCooledThresholdDescription:"Temperatura sotto la quale il piatto è considerato raffreddato dopo una stampa",userNotificationsEnabled:"Notifiche utente",userNotificationsEnabledDescription:"Abilita il menu notifiche utente e le notifiche e-mail per gli eventi di stampa. Richiede l'autenticazione avanzata.",userNotificationsDisabledHint:"Abilita l'autenticazione avanzata per usare le notifiche utente.",notificationProviders:"Provider notifiche",addProvider:"Aggiungi provider",editProvider:"Modifica provider",providerType:"Tipo provider",testNotification:"Notifica di test",testSuccess:"Notifica di test inviata",testFailed:"Invio notifica di test fallito",quietHours:"Ore silenziose",quietHoursDescription:"Non disturbare in queste ore",quietHoursStart:"Inizio",quietHoursEnd:"Fine",events:{title:"Eventi notifica",printStart:"Stampa avviata",printComplete:"Stampa completata",printFailed:"Stampa fallita",printStopped:"Stampa interrotta",printProgress:"Avanzamento",printProgressDescription:"Notifica al 25%, 50%, 75%",printerOffline:"Stampante offline",printerError:"Errore stampante",filamentLow:"Filamento in esaurimento",maintenanceDue:"Manutenzione dovuta",maintenanceDueDescription:"Notifica quando serve manutenzione"},smartPlug:{title:"Prese smart",add:"Aggiungi presa smart",edit:"Modifica presa smart",name:"Nome",ipAddress:"Indirizzo IP",linkedPrinter:"Stampante collegata",autoOn:"Accensione automatica",autoOnDescription:"Accendi all'avvio stampa",autoOff:"Spegnimento automatico",autoOffDescription:"Spegni dopo il completamento",offDelay:"Ritardo spegnimento",offDelayMinutes:"Minuti dopo la stampa",offDelayTemp:"Quando ugello sotto temperatura",currentState:"Stato attuale",turnOn:"Accendi",turnOff:"Spegni"},filamentTracking:"Tracciamento filamento",filamentTrackingDesc:"Scegli come tracciare le bobine di filamento. Puoi usare l'inventario integrato o collegare un server Spoolman esterno.",filamentChecks:"Controlli filamento",disableFilamentWarnings:"Disabilita avvisi filamento",disableFilamentWarningsDesc:"Non mostrare avvisi per filamento insufficiente durante la stampa o l'accodamento",preferLowestFilament:"Preferisci il filamento con meno residuo",preferLowestFilamentDesc:"Quando più bobine corrispondono, usa quella con meno filamento rimanente",trackingModeBuiltIn:"Inventario integrato",trackingModeBuiltInDesc:"Riconoscimento RFID automatico e tracciamento dell'uso inclusi",trackingModeSpoolmanDesc:"Server esterno per la gestione del filamento",builtInFeatureRfid:"Rileva automaticamente le bobine Bambu Lab RFID nell'AMS",builtInFeatureUsage:"Traccia il consumo di filamento per stampa",builtInFeatureCatalog:"Gestisci bobine, colori e profili K-factor",builtInFeatureThirdParty:"Le bobine di terze parti possono essere assegnate alle bobine dell'inventario",amsSyncButton:"Sincronizza pesi dall'AMS",amsSyncTitle:"Sincronizza pesi bobine dall'AMS",amsSyncMessage:"Questo sovrascriverà tutti i pesi delle bobine dell'inventario con i valori attuali di percentuale rimanente dell'AMS dalle stampanti connesse. Usa questa funzione per recuperare dati di peso corrotti. Le stampanti devono essere online.",amsSyncing:"Sincronizzazione...",amsSyncSuccess:"{{synced}} bobina/e sincronizzata/e, {{skipped}} saltata/e",amsSyncError:"Impossibile sincronizzare i pesi dall'AMS",spoolmanUrl:"URL Spoolman",spoolmanUrlHint:"URL del server Spoolman (es. http://localhost:7912)",spoolmanConnected:"Connesso",spoolmanDisconnected:"Disconnesso",status:"Stato",connect:"Connetti",disconnect:"Disconnetti",howSyncWorks:"Come funziona la sincronizzazione",syncInfoRfidOnly:"Solo le bobine ufficiali Bambu Lab con RFID vengono sincronizzate",syncInfoAutoCreate:"Le nuove bobine vengono create automaticamente in Spoolman alla prima sincronizzazione",syncInfoThirdPartySkipped:"Le bobine non Bambu Lab (terze parti, ricaricate) vengono saltate",linkingExistingSpools:"Collegamento bobine esistenti",linkingExistingSpoolsDesc:`Per collegare le bobine Spoolman esistenti all'AMS, passa il mouse su uno slot AMS e clicca "Collega a Spoolman".`,syncMode:"Modalità sincronizzazione",syncModeAuto:"Automatica",syncModeManual:"Solo manuale",syncModeAutoDesc:"I dati AMS si sincronizzano automaticamente quando vengono rilevate modifiche",syncModeManualDesc:"Sincronizzazione solo quando attivata manualmente",syncAmsData:"Sincronizza dati AMS",syncAmsDataDesc:"Sincronizza manualmente i dati AMS della stampante su Spoolman",allPrinters:"Tutte le stampanti",noDefaultPrinter:"Nessuna predefinita (chiedi ogni volta)",sidebarOrder:"Ordine barra laterale",saveThumbnails:"Salva miniature",captureFinishPhoto:"Acquisisci foto finale",noPrintersConfigured:"Nessuna stampante configurata",archiveMode:{always:"Crea sempre voce archivio",never:"Non creare mai voce archivio",ask:"Chiedi ogni volta"},checkForUpdatesLabel:"Controlla aggiornamenti",checkPrinterFirmware:"Controlla firmware stampante",includeBetaUpdates:"Includi versioni beta",includeBetaUpdatesDesc:"Notifica versioni beta e prerelease durante il controllo aggiornamenti",enableRetry:"Abilita retry",homeAssistantDescription:"Controlla prese smart tramite Home Assistant",environmentManagedLabel:"(Gestito dall'ambiente)",autoEnabledViaEnv:"Abilitato automaticamente tramite variabili d'ambiente",urlFromEnvReadOnly:"Valore impostato dalla variabile d'ambiente HA_URL (sola lettura)",tokenFromEnvReadOnly:"Valore impostato dalla variabile d'ambiente HA_TOKEN (sola lettura)",mqttConnectedTo:"Connesso a",prometheusDescription:"Esponi dati stampante in formato Prometheus",noSmartPlugsTitle:"Nessuna presa smart configurata",noSmartPlugsDescription:"Aggiungi una presa smart Tasmota per monitorare energia e automatizzare il controllo.",noProvidersTitle:"Nessun provider configurato",noProvidersDescription:"Aggiungi un provider per ricevere avvisi.",noTemplatesAvailable:"Nessun template disponibile. Riavvia il backend per generare i template predefiniti.",apiPermissionView:"Visualizza stato stampante e coda",apiPermissionEdit:"Aggiungi e rimuovi elementi dalla coda di stampa",apiKeysEmptyTitle:"Nessuna chiave API",apiKeysEmptyDescription:"Crea una chiave API per integrare servizi esterni.",noUsersFound:"Nessun utente trovato",noGroupsFound:"Nessun gruppo trovato",noGroupsAvailable:"Nessun gruppo disponibile",passwordsDoNotMatch:"Le password non coincidono",systemGroupWarning:"I nomi dei gruppi di sistema non possono essere modificati",authDisabledTitle:"Autenticazione disabilitata",authDisabledFeature1:"Richiedi accesso per usare il sistema",authDisabledFeature2:"Crea più utenti con permessi basati sui gruppi",authDisabledFeature3:"Controlla accesso con 50+ permessi granulari",userHasCreated:"Questo utente ha creato:",userItemsQuestion:"Cosa vuoi fare con questi elementi?",deleteUserConfirm:"Sei sicuro di voler eliminare questo utente?",actionCannotBeUndone:"Questa azione non può essere annullata.",addFirstSmartPlug:"Aggiungi la tua prima presa smart",providers:"Provider",log:"Log",testAll:"Testa tutto",testResults:"Risultati test",testPassedCount:"{{count}} riusciti",testFailedCount:"{{count}} falliti",messageTemplates:"Template messaggi",messageTemplatesDescription:"Personalizza i messaggi per ogni evento.",apiKeys:"Chiavi API",apiKeysDescription:"Crea chiavi API per integrazioni esterne e webhook.",createKey:"Crea chiave",apiKeyCreated:"Chiave API creata con successo",apiKeyCopyWarning:"Copia questa chiave ora - non verra mostrata di nuovo!",useInApiBrowser:"Usa nel Browser API",createNewApiKey:"Crea nuova chiave API",keyName:"Nome chiave",keyNamePlaceholder:"es., Home Assistant, OctoPrint",readStatus:"Leggi stato",readStatusDescription:"Visualizza stato stampante e coda",manageQueue:"Gestisci coda",manageQueueDescription:"Aggiungi e rimuovi elementi dalla coda di stampa",controlPrinter:"Controlla stampante",controlPrinterDescription:"Metti in pausa, riprendi e ferma stampe",unnamedKey:"Chiave senza nome",lastUsed:"Ultimo uso",read:"Lettura",control:"Controllo",createFirstKey:"Crea la tua prima chiave",webhookEndpoints:"Endpoint webhook",webhookApiKeyHint:"Usa la tua chiave API nell'header X-API-Key.",webhook:{getAllStatus:"Ottieni stato di tutte le stampanti",getSpecificStatus:"Ottieni stato di una stampante",addToQueue:"Aggiungi alla coda di stampa",pausePrint:"Metti in pausa stampa",resumePrint:"Riprendi stampa",stopPrint:"Ferma stampa"},apiBrowser:"Browser API",apiBrowserDescription:"Esplora e testa tutti gli endpoint API disponibili.",apiKeyForTesting:"Chiave API per test",apiKeyPlaceholder:"Incolla qui la tua chiave API per testare gli endpoint autenticati...",apiKeyHint:"Questa chiave verra inviata come header X-API-Key.",deleteApiKeyTitle:"Elimina chiave API",deleteApiKeyMessage:"Sei sicuro di voler eliminare questa chiave API? Le integrazioni che la usano non funzioneranno più.",deleteKey:"Elimina chiave",amsDisplayThresholds:"Soglie visualizzazione AMS",amsThresholdsDescription:"Configura soglie colore per umidità e temperatura AMS.",humidity:"Umidità",goodGreen:"Buono (verde)",fairOrange:"Discreto (arancione)",aboveFairBad:"Sopra soglia discreta mostra rosso (scarso)",fairAlsoDryingThreshold:"Questa soglia viene usata anche per attivare l'asciugatura automatica",temperature:"Temperatura",goodBlue:"Buono (blu)",aboveFairHot:"Sopra soglia discreta mostra rosso (caldo)",historyRetention:"Conservazione cronologia",keepSensorHistory:"Mantieni cronologia sensori per",historyRetentionDescription:"I dati più vecchi saranno eliminati automaticamente",defaultPrintOptions:"Opzioni di stampa predefinite",defaultPrintOptionsDescription:"Imposta i valori predefiniti per le opzioni di stampa. Possono essere modificati nella finestra di stampa.",defaultBedLevelling:"Livellamento piatto",defaultBedLevellingDesc:"Livellamento automatico del piatto prima della stampa",defaultFlowCali:"Calibrazione flusso",defaultFlowCaliDesc:"Calibra il flusso di estrusione",defaultVibrationCali:"Calibrazione vibrazioni",defaultVibrationCaliDesc:"Riduce gli artefatti di ringing",defaultLayerInspect:"Ispezione primo strato",defaultLayerInspectDesc:"Ispezione IA del primo strato",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Registra un video timelapse",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Conferma piatto libero",requirePlateClear:"Richiedi conferma piatto libero",requirePlateClearDescription:'Quando questa opzione è abilitata, lo scheduler attende una conferma per stampante che il piatto sia libero prima di avviare le stampe in coda su stampanti con lavori completati. Disabilitandola vengono nascosti anche il badge di stato del piatto e il pulsante "Segna il piatto come liberato" sulle schede stampante.',gcodeInjection:"Iniezione G-code",gcodeInjectionDescription:`Configura G-code personalizzato da iniettare all'inizio e/o alla fine delle stampe per sistemi di stampa automatica come Farmloop, SwapMod, AutoClear e Printflow 3D. Gli snippet sono configurati per modello di stampante e applicati quando "Inietta G-code" è abilitato su un elemento della coda.`,gcodeInjectionNoPrinters:"Nessuna stampante trovata. Aggiungi stampanti per configurare gli snippet G-code.",gcodeStartLabel:"G-code iniziale",gcodeEndLabel:"G-code finale",gcodeStartPlaceholder:"G-code inserito prima dell'inizio della stampa...",gcodeEndPlaceholder:"G-code aggiunto dopo la fine della stampa...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Asciugatura automatica",queueDryingDescription:"Asciugare automaticamente il filamento AMS quando la stampante è inattiva tra le stampe in coda. Usa la soglia di umidità sopra.",queueDryingEnabled:"Abilita asciugatura automatica",queueDryingEnabledDescription:"Avvia l'asciugatura AMS automaticamente quando la stampante è inattiva e l'umidità supera la soglia",queueDryingBlock:"Attendi completamento asciugatura",queueDryingBlockDescription:"Blocca la coda di stampa fino al completamento dell'asciugatura. Se disattivato, le stampe hanno priorità.",ambientDryingEnabled:"Asciugatura ambientale",ambientDryingEnabledDescription:"Asciuga automaticamente il filamento sulle stampanti inattive quando l'umidità supera la soglia, anche senza stampe in coda.",dryingPresets:"Preset di asciugatura",dryingPresetsDescription:"Temperatura e durata per tipo di filamento. AMS 2 Pro usa temperature più basse, AMS-HT supporta temperature più alte.",dryingFilament:"Filamento",printModal:"Modale stampa",expandCustomMapping:"Espandi mapping personalizzato di default",expandCustomMappingDescription:"Quando stampi su più stampanti, mostra mapping AMS per stampante espanso",authentication:"Autenticazione",authEnabledDescription:"La tua istanza è protetta con autenticazione",authDisabledDescription:"Abilita per richiedere accesso e gestire utenti",authDisabledMessage:"Abilita autenticazione per creare account, gestire permessi e proteggere la tua istanza Bambuddy.",enableAuthentication:"Abilita autenticazione",currentUser:"Utente corrente",changePassword:"Cambia password",admin:"Admin",users:"Utenti",addUser:"Aggiungi utente",groups:"Gruppi",addGroup:"Aggiungi gruppo",system:"Sistema",noDescription:"Nessuna descrizione",userCount:"{{count}} utenti",permissionCount:"{{count}} permessi",createUser:"Crea utente",username:"Nome utente",enterUsername:"Inserisci nome utente",password:"Password",enterPassword:"Inserisci password (min 6 caratteri)",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Conferma password",viewReleaseOnGitHub:"Vedi release su GitHub",turnAllPlugsOn:"Accendi tutte le prese",turnAllPlugsOff:"Spegni tutte le prese",clearNotificationLogs:"Cancella log notifiche",clearLogsMessage:"Questo eliminerà definitivamente tutti i log notifiche più vecchi di 30 giorni. Questa azione non può essere annullata.",clearLogs:"Cancella log",resetUiPreferences:"Reimposta preferenze UI",resetUiPreferencesMessage:"Questo reimposterà le preferenze UI ai valori predefiniti: ordine barra laterale, tema, layout dashboard, modalità vista e preferenze ordinamento. Stampanti, archivi e impostazioni server NON saranno modificati. La pagina si ricaricherà dopo la cancellazione.",resetPreferences:"Reimposta preferenze",deleteGroupTitle:"Elimina gruppo",deleteGroupMessage:"Sei sicuro di voler eliminare questo gruppo? Gli utenti in questo gruppo perderanno questi permessi.",deleteGroup:"Elimina gruppo",disableAuthenticationTitle:"Disabilita autenticazione",disableAuthenticationMessage:"Sei sicuro di voler disabilitare l'autenticazione? Questo renderà la tua istanza Bambuddy accessibile senza login. Tutti gli utenti resteranno nel database ma l'autenticazione sarà disabilitata.",disableAuthentication:"Disabilita autenticazione",configureBambuddy:"Configura Bambuddy",systemDefault:"Predefinito di sistema",archiveSettings:"Impostazioni archivio",newWindow:"Nuova finestra",embeddedOverlay:"Overlay incorporato",preferredSlicer:"Slicer preferito",preferredSlicerDescription:"Scegli quale applicazione slicer usare per aprire i file",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"Camere esterne",costTracking:"Tracciamento costi",printsOnly:"Solo stampe",totalConsumption:"Consumo totale",dataManagement:"Gestione dati",storageUsage:"Memoria utilizzata",storageUsageDescription:"Ripartizione della memoria per categoria",storageUsageTotal:"Totale",storageUsageErrors:"Errori",storageUsageOtherBreakdown:"Altro (include risorse statiche, script e file di configurazione)",storageUsageSystem:"Sistema",storageUsageData:"Dati",storageUsageUnavailable:"Informazioni sull'utilizzo della memoria non disponibili",clearNotificationLogsDescription:"Elimina log notifiche più vecchi di 30 giorni",resetUiPreferencesDescription:"Reimposta ordine barra laterale, tema, modalità vista e preferenze layout. Stampanti, archivi e impostazioni non vengono modificati.",enableHomeAssistant:"Abilita Home Assistant",enableMqtt:"Abilita MQTT",useTls:"Usa TLS",enableMetricsEndpoint:"Abilita endpoint metriche",availableMetrics:"Metriche disponibili",editUser:"Modifica utente",deleteUserTitle:"Elimina utente",groupName:"Nome gruppo",leaveEmptyForAnonymous:"Lascia vuoto per anonimo",leaveEmptyForNoAuth:"Lascia vuoto per nessuna autenticazione",enterNewPassword:"Inserisci nuova password",confirmNewPassword:"Conferma nuova password",enterGroupName:"Inserisci nome gruppo",enterDescriptionOptional:"Inserisci descrizione (opzionale)",enterCurrentPassword:"Inserisci password attuale",enterNewPasswordMin6:"Inserisci nuova password (min 6 caratteri)",toast:{keyCopied:"Chiave copiata negli appunti",copyFailed:"Copia chiave fallita",keyAddedToBrowser:"Chiave aggiunta al Browser API",clearLogsFailed:"Eliminazione log fallita",uiPreferencesReset:"Preferenze UI reimpostate. Aggiornamento...",authDisabled:"Autenticazione disabilitata con successo",authDisableFailed:"Disabilitazione autenticazione fallita",apiKeyCreated:"Chiave API creata",apiKeyDeleted:"Chiave API eliminata",userCreated:"Utente creato con successo",userUpdated:"Utente aggiornato con successo",userDeleted:"Utente eliminato con successo",groupCreated:"Gruppo creato con successo",groupUpdated:"Gruppo aggiornato con successo",groupDeleted:"Gruppo eliminato con successo",fillRequiredFields:"Compila tutti i campi obbligatori",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri",enterGroupName:"Inserisci un nome gruppo",settingsSaved:"Impostazioni salvate",noPermissionUpdate:"Non hai il permesso di modificare le impostazioni",cameraSettingsSaved:"Impostazioni camera salvate",enterCameraUrl:"Inserisci un URL camera",passwordChanged:"Password cambiata con successo",connectionFailed:"Connessione fallita",testFailed:"Test fallito",cameraConnected:"Camera connessa{{resolution}}"},testConnection:"Testa connessione",catalog:{spoolCatalog:"Catalogo bobine",spoolCatalogDescription:"Pesi delle bobine vuote per marca/tipo. Utilizzato per la ricerca automatica del peso quando si aggiungono bobine.",searchCatalog:"Cerca nel catalogo...",addNewEntry:"Aggiungi nuova voce",namePlaceholder:"Nome (es. Bambu Lab - Plastica)",weight:"Peso",type:"Tipo",default:"Predefinito",custom:"Personalizzato",noMatch:"Nessuna voce corrisponde alla ricerca",empty:"Nessuna voce nel catalogo",deleteEntry:"Elimina voce",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',resetCatalog:"Ripristina catalogo",resetConfirm:"Ripristinare il catalogo ai valori predefiniti? Tutte le voci personalizzate verranno rimosse.",loadFailed:"Impossibile caricare il catalogo bobine",nameWeightRequired:"Nome e peso sono obbligatori",entryAdded:"Voce aggiunta",addFailed:"Impossibile aggiungere la voce",entryUpdated:"Voce aggiornata",updateFailed:"Impossibile aggiornare la voce",entryDeleted:"Voce eliminata",deleteFailed:"Impossibile eliminare la voce",resetSuccess:"Catalogo ripristinato ai valori predefiniti",resetFailed:"Impossibile ripristinare il catalogo",exported:"{{count}} voci esportate",imported:"{{added}} voci importate ({{skipped}} saltate)",importFailed:"Impossibile importare: formato JSON non valido",exportTooltip:"Esporta catalogo in JSON",importTooltip:"Importa catalogo da JSON",resetTooltip:"Ripristina valori predefiniti",selectedCount:"{{count}} selezionati",deleteSelected:"Elimina selezionati",bulkDeleteConfirm:"Eliminare {{count}} voci?",bulkDeleted:"{{count}} voci eliminate",bulkDeleteFailed:"Impossibile eliminare le voci"},colorCatalog:{title:"Catalogo colori",description:"Colori del filamento per produttore/materiale. Utilizzato per la ricerca automatica del colore quando si aggiungono bobine.",searchColors:"Cerca colori...",allManufacturers:"Tutti i produttori",addNewColor:"Aggiungi nuovo colore",manufacturer:"Produttore",colorName:"Nome colore",hex:"Hex",materialOptional:"Materiale (opzionale)",showing:"Visualizzazione di {{filtered}} su {{total}} colori",noMatch:"Nessun colore corrisponde alla ricerca",empty:"Nessun colore nel catalogo",deleteColor:"Elimina colore",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',resetCatalog:"Ripristina catalogo colori",resetConfirm:"Ripristinare il catalogo ai valori predefiniti? Tutti i colori personalizzati verranno rimossi.",sync:"Sincronizza",starting:"Avvio...",syncTooltip:"Sincronizza da FilamentColors.xyz (2000+ colori, potrebbe richiedere un minuto)",loadFailed:"Impossibile caricare il catalogo colori",fieldsRequired:"Produttore, nome colore e colore hex sono obbligatori",colorAdded:"Colore aggiunto",addFailed:"Impossibile aggiungere il colore",colorUpdated:"Colore aggiornato",updateFailed:"Impossibile aggiornare il colore",colorDeleted:"Colore eliminato",deleteFailed:"Impossibile eliminare il colore",resetSuccess:"Catalogo colori ripristinato ai valori predefiniti",resetFailed:"Impossibile ripristinare il catalogo",syncUpToDate:"Già aggiornato ({{count}} colori verificati)",syncComplete:"{{added}} nuovi colori aggiunti ({{skipped}} già esistenti)",syncError:"Errore di sincronizzazione",syncFailed:"Impossibile sincronizzare da FilamentColors.xyz",exported:"{{count}} colori esportati",imported:"{{added}} colori importati ({{skipped}} saltati)",importFailed:"Impossibile importare: formato JSON non valido",selectedCount:"{{count}} selezionati",deleteSelected:"Elimina selezionati",bulkDeleteConfirm:"Eliminare {{count}} colori?",bulkDeleted:"{{count}} colori eliminati",bulkDeleteFailed:"Impossibile eliminare i colori"},dateFormat:"Formato data",dateFormatUs:"US (MM/GG/AAAA)",dateFormatEu:"EU (GG/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-GG)",timeFormat:"Formato ora",timeFormat12:"12 ore (3:30 PM)",timeFormat24:"24 ore (15:30)",defaultPrinter:"Stampante predefinita",defaultPrinterDescription:"Preseleziona questa stampante per upload, ristampe e altre operazioni.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Trascina gli elementi nella barra laterale per riordinare. Ripristina l'ordine predefinito qui.",setDefault:"Imposta predefinito",sidebarOrderSetDefaultHint:"Imposta predefinito applica l'ordine attuale del menu agli utenti che non hanno ancora personalizzato il proprio.",sidebarDefaultSet:"L'ordine predefinito del menu è stato impostato.",sidebarDefaultCleared:"Ordine predefinito del menu cancellato.",sidebarDefaultFailed:"Impossibile impostare l'ordine predefinito del menu.",reset:"Ripristina",darkMode:"Modalità scura",lightMode:"Modalità chiara",active:"(attivo)",background:"Sfondo",accent:"Accento",style:"Stile",bgNeutral:"Neutro",bgWarm:"Caldo",bgCool:"Freddo",bgOled:"OLED Nero",bgSlate:"Blu ardesia",bgForest:"Verde foresta",accentGreen:"Verde",accentTeal:"Verde acqua",accentBlue:"Blu",accentOrange:"Arancione",accentPurple:"Viola",accentRed:"Rosso",styleClassic:"Classico",styleGlow:"Luminoso",styleVibrant:"Vibrante",themeToggleHint:"Passa tra modalità scura e chiara con l'icona sole/luna nella barra laterale.",autoArchivePrints:"Archiviazione automatica stampe",autoArchiveDescription:"Salva automaticamente i file 3MF al completamento delle stampe",saveThumbnailsDescription:"Estrai e salva le immagini di anteprima dai file 3MF",captureFinishPhotoDescription:"Scatta una foto dalla fotocamera della stampante al completamento della stampa",ffmpegNotInstalled:"ffmpeg non installato",ffmpegRequired:"L'acquisizione dalla fotocamera richiede ffmpeg. Installalo tramite <brew>brew install ffmpeg</brew> (macOS) o <apt>apt install ffmpeg</apt> (Linux).",camera:"Fotocamera",cameraViewMode:"Modalità visualizzazione fotocamera",cameraOverlayDescription:"La fotocamera si apre in un overlay ridimensionabile sulla schermata principale",cameraWindowDescription:"La fotocamera si apre in una finestra separata del browser",externalCamerasDescription:"Configura fotocamere esterne per sostituire la fotocamera integrata della stampante. Supporta stream MJPEG, RTSP, snapshot HTTP e fotocamere USB (V4L2). Quando abilitata, la fotocamera esterna viene usata per la vista in diretta e le foto di completamento.",cameraPlaceholderUsb:"Percorso dispositivo (/dev/video0)",cameraPlaceholderUrl:"URL fotocamera (rtsp://... o http://...)",cameraTypeMjpeg:"Stream MJPEG",cameraTypeRtsp:"Stream RTSP",cameraTypeSnapshot:"Snapshot HTTP",cameraTypeUsb:"Fotocamera USB (V4L2)",cameraRotation:"Rotazione",test:"Test",connected:"Connesso",disconnected:"Disconnesso",currency:"Valuta",defaultFilamentCost:"Costo filamento predefinito (per kg)",electricityCost:"Costo elettricità per kWh",energyDisplayMode:"Modalità visualizzazione energia",energyModePrintDescription:"La dashboard mostra la somma dell'energia usata durante le stampe",energyModeTotalDescription:"La dashboard mostra l'energia totale dalle prese smart",fileManager:"Gestore file",createArchiveEntry:"Crea voce archivio durante la stampa",createArchiveEntryDescription:"Quando si stampa dal gestore file, crea opzionalmente una voce di archivio",lowDiskSpaceWarning:"Avviso spazio disco insufficiente",lowDiskSpaceDescription:"Mostra avviso quando lo spazio disco scende sotto questa soglia",printerFirmware:"Firmware stampante",checkFirmwareDescription:"Controlla aggiornamenti firmware da Bambu Lab",bambuddySoftware:"Software Bambuddy",autoCheckDescription:"Controlla automaticamente nuove versioni all'avvio",checkNow:"Controlla ora",updateAvailableVersion:"Aggiornamento disponibile: v{{version}}",releaseNotes:"Note di rilascio",updateViaDocker:"Aggiorna tramite Docker Compose:",updateViaHomeAssistant:"Gli aggiornamenti sono gestiti dal Supervisor di Home Assistant. Apri Impostazioni → Add-on → Bambuddy in Home Assistant per installare la nuova versione.",installUpdate:"Installa aggiornamento",latestVersionRunning:"Stai usando l'ultima versione",failedToCheckUpdates:"Controllo aggiornamenti fallito: {{error}}",backupRestore:"Backup e ripristino",backupRestoreDescription:"Esporta/importa impostazioni e configura backup GitHub",goToBackup:"Vai al backup",externalUrl:"URL esterno",externalUrlDescription:"L'URL esterno dove Bambuddy è accessibile. Usato per immagini di notifica e integrazioni esterne.",bambuddyUrl:"URL Bambuddy",externalUrlHint:"Includi protocollo e porta (es. http://192.168.1.100:8000)",ftpRetry:"Riprova FTP",ftpRetryDescription:"Riprova le operazioni FTP quando il WiFi della stampante è instabile. Si applica a download 3MF, upload stampe, download timelapse e aggiornamenti firmware.",autoRetryDescription:"Riprova automaticamente le operazioni FTP fallite",retryAttempts:"Tentativi di ripetizione",retryDelay:"Ritardo ripetizione",connectionTimeout:"Timeout connessione",time_one:"{{count}} volta",time_other:"{{count}} volte",second_one:"{{count}} secondo",second_other:"{{count}} secondi",nSeconds:"{{count}} secondi",increaseForWeakWifi:"Aumenta per stampanti con WiFi debole",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Connetti a Home Assistant per controllare le prese smart tramite l'API REST HA. Supporta entità switch, light, input_boolean e script.",homeAssistantUrl:"URL Home Assistant",longLivedAccessToken:"Token di accesso a lunga durata",haTokenHint:"Crea un token in HA: Profilo → Token di accesso a lunga durata → Crea token",connectionSuccessful:"Connessione riuscita",connectionFailed:"Connessione fallita",haConnectionSuccess:"Connesso con successo a Home Assistant.",haConnectionFailed:"Connessione a Home Assistant fallita.",mqttPublishing:"Pubblicazione MQTT",mqttDescription:"Pubblica eventi BamBuddy su un broker MQTT esterno per l'integrazione con Node-RED, Home Assistant e altri sistemi di automazione.",mqttEnableDescription:"Pubblica eventi su broker MQTT esterno",brokerHostname:"Hostname broker",port:"Porta",usernameOptional:"Nome utente (opzionale)",passwordOptional:"Password (opzionale)",topicPrefix:"Prefisso topic",topicPrefixHint:"I topic saranno: {{prefix}}/printers/<serial>/status, ecc.",prometheusMetrics:"Metriche Prometheus",prometheusEndpointDescription:"Esponi metriche stampante su <code>/api/v1/metrics</code> per monitoraggio Prometheus/Grafana.",bearerTokenOptional:"Token Bearer (opzionale)",bearerTokenHint:"Se impostato, le richieste devono includere <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Stato connessione",metricsPrinterState:"Stato stampante (idle/printing/ecc)",metricsPrintProgress:"Progresso stampa 0-100%",metricsBedTemp:"Temperatura piatto",metricsNozzleTemp:"Temperatura ugello",metricsPrintsTotal:"Stampe totali per risultato",metricsMore:"...e altro (strati, ventole, coda, consumo filamento)",smartPlugsDescription:"Connetti prese smart (Tasmota o Home Assistant) per automatizzare il controllo dell'alimentazione e monitorare il consumo energetico delle stampanti.",allOn:"Tutte accese",allOff:"Tutte spente",addSmartPlug:"Aggiungi presa smart",energySummary:"Riepilogo energia",currentPower:"Potenza attuale",plugsOnline:"{{reachable}}/{{total}} prese online",today:"Oggi",yesterday:"Ieri",total:"Totale",enablePlugsForSummary:"Abilita le prese per vedere il riepilogo energia",addNotificationProvider:"Aggiungi",systemBadge:"(Sistema)",creating:"Creazione...",changing:"Modifica...",deleteUserAndItems:"Elimina utente E i suoi elementi",deleteUserKeepItems:"Elimina utente, mantieni elementi (diventeranno senza proprietario)",ok:"OK",twoFa:{totpTitle:"App Authenticator (TOTP)",totpDesc:"Usa un'app come Google Authenticator, Aegis o Authy.",emailOtpTitle:"OTP via e-mail",emailOtpDesc:"Invia un codice monouso a {{email}} al momento del login.",emailOtpNoEmail:"Aggiungi un indirizzo e-mail al tuo account per abilitare questo metodo.",addEmailFirst:"Il tuo account non ha un indirizzo e-mail. Chiedi a un amministratore di aggiungerne uno.",setupTotp:"Configura app Authenticator",setupAuthApp:"Configura app Authenticator",setupInstructions:"Scansiona il codice QR con la tua app authenticator, poi conferma con un codice.",manualEntry:"Impossibile scansionare? Inserisci questo segreto manualmente:",scannedContinue:"Codice scansionato — continua",enterCodeToConfirm:"Inserisci il codice a 6 cifre dalla tua app authenticator per confermare.",activate:"Attiva",disableTotp:"Disabilita Authenticator",disableConfirmHint:"Inserisci un codice TOTP valido o un codice di backup per disabilitare l'authenticator.",totpDisabled:"App Authenticator disabilitata.",emailOtpEnabled:"OTP via e-mail abilitato.",emailOtpDisabled:"OTP via e-mail disabilitato.",smtpRequired:"Configura e testa prima le impostazioni SMTP.",invalidCode:"Codice non valido. Riprova.",enableEmailOtp:"Abilita OTP via e-mail",disableEmailOtp:"Disabilita OTP via e-mail",emailSetupEnterCode:"È stato inviato un codice di verifica al tuo indirizzo e-mail. Inseriscilo qui sotto per confermare che possiedi questa casella di posta.",verifyAndEnable:"Verifica e abilita",emailDisablePasswordHint:"Inserisci la password del tuo account per confermare la disabilitazione dell'OTP via e-mail.",passwordPlaceholder:"Inserisci la tua password",backupCodesTitle:"Salva i tuoi codici di backup",backupCodesWarning:"Conserva questi codici in un posto sicuro. Ogni codice può essere usato una sola volta.",backupCodesRemaining:"{{count}} codici di backup rimanenti",savedCodes:"Codici salvati",regenBackup:"Rigenera codici di backup",regenBackupHint:"Inserisci il tuo codice TOTP corrente per generare 10 nuovi codici di backup.",newBackupCodes:"Nuovi codici di backup",linkedAccounts:"Account SSO collegati",linkedAccountsDesc:"Questi provider di identità esterni sono collegati al tuo account.",oidcUnlinked:"Account scollegato."},oidc:{title:"Provider SSO / OIDC",desc:"Configura provider OpenID Connect per il single sign-on.",addProvider:"Aggiungi provider",newProvider:"Nuovo provider",empty:"Nessun provider OIDC configurato.",created:"Provider creato.",updated:"Provider aggiornato.",deleted:"Provider eliminato.",deleteTitle:"Elimina provider",deleteMessage:'Eliminare "{{name}}"? Tutti gli account collegati verranno disconnessi.',form:{name:"Nome visualizzato",issuerUrl:"URL emittente",clientId:"Client ID",clientSecret:"Client secret",scopes:"Scope",iconUrl:"URL icona (opzionale)",enabled:"Abilitato",autoCreate:"Crea utenti automaticamente",autoCreateDesc:"Crea automaticamente un account locale al primo accesso.",autoLink:"Collega automaticamente gli account esistenti",autoLinkDesc:"Collega gli account locali esistenti tramite email al primo accesso.",secretHint:"lascia vuoto per mantenere",secretPlaceholder:"nuovo segreto",emailClaim:"Claim email",emailClaimDesc:"Claim JWT usato come identità email. Usare 'preferred_username' o 'upn' per Azure Entra ID (che non invia email_verified). Usare solo nomi di claim affidabili.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"Richiedi verifica email",requireEmailVerifiedDesc:"Accetta il claim email solo se il provider lo contrassegna come verificato.",requireEmailVerifiedWarning:"Attenzione: l'email sarà accettata senza verifica. Usare solo con provider affidabili.",requireEmailVerifiedAutoLink:"Disabilitare prima il collegamento automatico per modificare questa impostazione."}},spoolbuddy:{infoTitle:"Dispositivi SpoolBuddy",infoBody:"I kiosk SpoolBuddy si registrano automaticamente tramite heartbeat. Annulla la registrazione qui se un dispositivo non è più in uso o se un duplicato obsoleto è rimasto dopo un crash del daemon.",duplicatesTitle:"{{count}} dispositivi registrati",duplicatesBody:"Solo il primo dispositivo registrato viene utilizzato dall'interfaccia kiosk. Se uno di questi è un duplicato obsoleto da un crash, annulla la sua registrazione — un dispositivo online si ri-registrerà al prossimo heartbeat.",empty:"Nessun dispositivo SpoolBuddy registrato.",online:"Online",offline:"Offline",unregister:"Annulla registrazione",unregisterSuccess:"Dispositivo deregistrato",unregisterError:"Deregistrazione non riuscita",confirmTitle:"Annullare la registrazione del dispositivo SpoolBuddy?",confirmBody:'Questo rimuoverà "{{hostname}}" ({{deviceId}}) dal database. Se il dispositivo è online, si ri-registrerà al prossimo heartbeat.',ipAddress:"Indirizzo IP",firmware:"Firmware",lastSeen:"Ultimo rilevamento",daemonUptime:"Uptime del daemon",systemUptime:"Uptime sistema",never:"mai",nfc:"NFC",scale:"Bilancia",cpuTemp:"Temp. CPU",memory:"Memoria",disk:"Disco",update:"Aggiorna",updateConfirmTitle:"Aggiornare il daemon Spoolbuddy?",updateConfirmBody:`Avviare un aggiornamento software su "{{hostname}}"? Il daemon si riavvierà al termine dell'aggiornamento.`,restartBrowser:"Riavvia browser",restartBrowserConfirmTitle:"Riavviare il browser del kiosk?",restartBrowserConfirmBody:'Riavviare il browser del kiosk su "{{hostname}}"? Il display si oscurerà brevemente.',restartDaemon:"Riavvia daemon",restartDaemonConfirmTitle:"Riavviare il daemon Spoolbuddy?",restartDaemonConfirmBody:'Riavviare il daemon Spoolbuddy su "{{hostname}}"? Il dispositivo sarà offline per alcuni secondi.',reboot:"Riavvia",rebootConfirmTitle:"Riavviare il dispositivo?",rebootConfirmBody:'Riavviare "{{hostname}}"? Il dispositivo sarà offline per circa un minuto.',shutdown:"Spegni",shutdownConfirmTitle:"Spegnere il dispositivo?",shutdownConfirmBody:'Spegnere "{{hostname}}"? Sarà necessario un accesso fisico per riaccenderlo.',commandConfirm:"Conferma",commandQueued:"Comando in coda",commandError:"Invio comando non riuscito"}},notification:{printStarted:{title:"Stampa avviata",body:"{{printer}}: {{filename}} ha iniziato a stampare"},printCompleted:{title:"Stampa completata",body:"{{printer}}: {{filename}} completata con successo"},printFailed:{title:"Stampa fallita",body:"{{printer}}: {{filename}} fallita"},printStopped:{title:"Stampa interrotta",body:"{{printer}}: {{filename}} interrotta"},printProgress:{title:"Avanzamento stampa",body:"{{printer}}: {{filename}} al {{percent}}% completamento"},printerOffline:{title:"Stampante offline",body:"{{printer}} e offline"},printerError:{title:"Errore stampante",body:"{{printer}}: {{error}}"},filamentLow:{title:"Filamento in esaurimento",body:"{{printer}}: Filamento in esaurimento"},maintenanceDue:{title:"Manutenzione dovuta",body:"{{printer}}: {{items}} richiedono attenzione"}},errors:{generic:"Qualcosa e andato storto",networkError:"Errore di rete. Controlla la connessione.",notFound:"Non trovato",unauthorized:"Non autorizzato",serverError:"Errore server",validationError:"Controlla i dati inseriti",printerConnectionFailed:"Connessione alla stampante fallita",saveFailed:"Salvataggio modifiche fallito",deleteFailed:"Eliminazione fallita",loadFailed:"Caricamento dati fallito"},hmsErrors:{title:"Errori - {{name}}",noErrors:"Nessun errore",viewOnWiki:"Vedi su Bambu Lab Wiki",clearInstructions:"Cancella gli errori sulla stampante per rimuoverli qui.",clearErrors:"Cancella errori",clearSuccess:"Errori HMS cancellati",clearFailed:"Impossibile cancellare gli errori HMS"},mqttDebug:{title:"Log debug MQTT",searchPlaceholder:"Cerca topic o payload...",noMessages:"Nessun messaggio registrato",startLoggingHint:'Clicca "Avvia logging" per iniziare a catturare messaggi MQTT',noMessagesMatch:"Nessun messaggio corrisponde al filtro",adjustFilterHint:"Prova a modificare la ricerca o i filtri",incoming:"In ingresso",outgoing:"In uscita",loggingStopped:"Logging fermato",loggingActive:"Logging attivo - i messaggi si aggiornano automaticamente",startLogging:"Avvia logging",stopLogging:"Ferma logging",clearLog:"Pulisci log",topic:"Topic",timestamp:"Timestamp",direction:"Direzione",all:"Tutti"},printerFiles:{title:"Gestore file",storageUsed:"Usato:",storageFree:"Libero:",filterPlaceholder:"Filtra file...",deleteButton:"Elimina",deleteFiles:"Elimina {{count}} file",deleteFileConfirm:'Eliminare "{{name}}"? Questa azione non può essere annullata.',deleteFilesConfirm:"Eliminare {{count}} file selezionati? Questa azione non può essere annullata.",noFiles:"Nessun file sulla stampante",loadingFiles:"Caricamento file...",failedToLoad:"Caricamento file fallito",toast:{filesDeleted:"Eliminati {{count}} file",deleteFailed:"Eliminazione fallita: {{error}}"}},confirm:{delete:"Sei sicuro di voler eliminare questo?",unsavedChanges:"Hai modifiche non salvate. Sei sicuro di voler uscire?",clearQueue:"Sei sicuro di voler svuotare la coda?"},login:{title:"Login Bambuddy",subtitle:"Accedi al tuo account",username:"Nome utente",usernamePlaceholder:"Inserisci il nome utente",usernameOrEmail:"Nome utente o email",usernameOrEmailPlaceholder:"Nome utente o @ Email",password:"Password",passwordPlaceholder:"Inserisci la password",signIn:"Accedi",signingIn:"Accesso in corso...",rememberMe:"Ricordami",forgotPassword:"Hai dimenticato la password?",loginSuccess:"Accesso riuscito",loginFailed:"Accesso fallito",enterCredentials:"Inserisci nome utente e password",enterEmail:"Inserisci il tuo indirizzo e-mail",oidcLoginFailed:"Accesso OIDC fallito",oidcErrors:{providerError:"Il provider di identità ha restituito un errore",missingParameters:"Parametri obbligatori mancanti nel callback OIDC",invalidState:"Lo stato OIDC non è valido o è già stato utilizzato",stateExpired:"La sessione OIDC è scaduta — riprovare",providerNotFound:"Provider OIDC non trovato",discoveryFailed:"Impossibile recuperare il documento di discovery OIDC",invalidDiscovery:"Il documento di discovery OIDC non è valido",networkError:"Errore di rete durante lo scambio di token OIDC",badResponse:"Risposta inattesa durante lo scambio di token OIDC",noIdToken:"Il provider OIDC non ha restituito un ID token",validationFailed:"La validazione del token OIDC non è riuscita",nonceMismatch:"Il nonce OIDC non corrisponde — possibile attacco di replay",missingSubClaim:"Il token OIDC è privo del claim sub",noLinkedAccount:"Nessun account locale è collegato a questa identità OIDC",accountInactive:"Il tuo account è inattivo",userResolutionFailed:"Impossibile risolvere il tuo account",internalError:"Si è verificato un errore interno durante il login OIDC",tokenExchangeFailed:"Lo scambio di token OIDC non è riuscito"},forgotPasswordTitle:"Password dimenticata",forgotPasswordMessage:"Se hai dimenticato la password, contatta il tuo amministratore di sistema per reimpostarla.",forgotPasswordEmailMessage:"Inserisci il tuo indirizzo email e ti invieremo una nuova password.",emailAddress:"Indirizzo email",emailPlaceholder:"tua.email@esempio.com",cancel:"Annulla",sending:"Invio...",sendResetEmail:"Invia email di reimpostazione",howToReset:"Come reimpostare la password:",resetStep1:"Contatta il tuo amministratore Bambuddy",resetStep2:"Chiedi di reimpostare la password in Gestione utenti",resetStep3:"Possono impostare una nuova password temporanea",resetStep4:"Accedi con la nuova password e cambiala in Impostazioni",gotIt:"Capito",twoFA:{title:"Autenticazione a due fattori",subtitle:"Il tuo account è protetto da 2FA. Inserisci il codice di verifica qui sotto.",methodAuthenticator:"App di autenticazione",methodEmail:"Codice via e-mail",methodBackup:"Codice di recupero",instructionsTotp:"Apri la tua app di autenticazione e inserisci il codice a 6 cifre per Bambuddy.",instructionsEmail:"Un codice a 6 cifre è stato inviato al tuo indirizzo e-mail. È valido per 10 minuti.",instructionsEmailNotSent:"Clicca il pulsante qui sotto per ricevere un codice di verifica via e-mail.",instructionsBackup:"Inserisci uno dei tuoi codici di recupero a 8 caratteri. Ogni codice può essere utilizzato una sola volta.",sendCodeButton:"Invia codice via e-mail",sendingCode:"Invio in corso...",resendCode:"Invia nuovamente il codice",codeLabel:"Codice di verifica",backupCodeLabel:"Codice di recupero",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verifica",verifyingButton:"Verifica in corso...",backToLogin:"← Torna alla pagina di accesso",orContinueWith:"oppure accedi con",signInWith:"Accedi con {{provider}}",enterCode:"Inserisci il codice di verifica",sendCodeFailed:"Invio del codice di verifica non riuscito",invalidCode:"Codice non valido. Riprova."},resetPassword:{title:"Imposta nuova password",subtitle:"Inserisci e conferma la nuova password qui sotto.",newPassword:"Nuova password",newPasswordPlaceholder:"Almeno 8 caratteri",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Ripeti la nuova password",saving:"Salvataggio…",submit:"Imposta nuova password",backToLogin:"Torna al login",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve avere almeno 8 caratteri",resetFailed:"Reimpostazione non riuscita. Il link potrebbe essere scaduto."}},setup:{title:"Configurazione Bambuddy",subtitle:"Configura autenticazione per la tua istanza Bambuddy",enableAuth:"Abilita autenticazione",adminAccount:"Account admin",adminAccountDesc:"Se esistono già admin, l'autenticazione verrà abilitata usando gli account esistenti. Lascia i campi sotto vuoti per usare gli admin esistenti, oppure inserisci nuove credenziali per creare un nuovo utente admin.",adminUsername:"Nome utente admin",adminPassword:"Password admin",optionalIfAdminExists:"(opzionale se esistono admin)",adminUsernamePlaceholder:"Inserisci nome utente admin (opzionale)",adminPasswordPlaceholder:"Inserisci password admin (opzionale)",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Conferma password admin",settingUp:"Configurazione...",completeSetup:"Completa configurazione",toast:{authEnabledAdminCreated:"Autenticazione abilitata e utente admin creato",authEnabledExistingAdmins:"Autenticazione abilitata usando admin esistenti",setupCompleted:"Configurazione completata",enterBothCredentials:"Inserisci nome utente e password admin, oppure lascia entrambi vuoti per usare admin esistenti",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri"}},changePassword:{title:"Cambia password",currentPassword:"Password attuale",currentPasswordPlaceholder:"Inserisci password attuale",newPassword:"Nuova password",newPasswordPlaceholder:"Inserisci nuova password (min 6 caratteri)",confirmPassword:"Conferma nuova password",confirmPasswordPlaceholder:"Conferma nuova password",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri",changing:"Modifica in corso...",success:"Password cambiata con successo",failed:"Modifica password fallita"},plateAlert:{title:"Stampa in pausa!",message:"Oggetti rilevati sul piatto. La stampa è stata messa automaticamente in pausa. Svuota il piatto e riprendi la stampa.",understand:"Ho capito"},camera:{title:"Vista camera",invalidPrinterId:"ID stampante non valido",live:"Live",snapshot:"Snapshot",restartStream:"Riavvia stream",refreshSnapshot:"Aggiorna snapshot",fullscreen:"Schermo intero",exitFullscreen:"Esci da schermo intero",connectingToCamera:"Connessione alla camera...",capturingSnapshot:"Acquisizione snapshot...",connectionLost:"Connessione persa",connectionFailed:"Connessione camera fallita",reconnecting:"Riconnessione tra {{countdown}}s... (tentativo {{attempt}}/{{max}})",reconnectNow:"Riconnetti ora",cameraUnavailable:"Camera non disponibile",cameraUnavailableDesc:"Assicurati che la stampante sia accesa e connessa.",noCamera:"Nessuna camera disponibile",retry:"Riprova",cameraStream:"Stream camera",zoomOut:"Zoom indietro",zoomIn:"Zoom avanti",resetZoom:"Reset zoom",recording:"Registrazione",startRecording:"Avvia registrazione",stopRecording:"Ferma registrazione",chamberLight:"Accendi/Spegni luce camera"},groups:{title:"Gestione gruppi",subtitle:"Gestisci gruppi permessi per controllo accesso",backToSettings:"Torna a Impostazioni",createGroup:"Crea gruppo",noPermission:"Non hai il permesso di accedere a questa pagina.",system:"Sistema",noDescription:"Nessuna descrizione",usersCount:"{{count}} utenti",permissionsCount:"{{count}} permessi",edit:"Modifica",delete:"Elimina",toast:{created:"Gruppo creato con successo",updated:"Gruppo aggiornato con successo",deleted:"Gruppo eliminato con successo",enterGroupName:"Inserisci un nome gruppo"},modal:{editGroup:"Modifica gruppo",createGroup:"Crea gruppo",cancel:"Annulla",saving:"Salvataggio...",creating:"Creazione...",saveChanges:"Salva modifiche"},form:{groupName:"Nome gruppo",groupNamePlaceholder:"Inserisci nome gruppo",systemGroupWarning:"I nomi dei gruppi di sistema non possono essere modificati",description:"Descrizione",descriptionPlaceholder:"Inserisci descrizione (opzionale)",permissions:"Permessi ({{count}} selezionati)"},deleteModal:{title:"Elimina gruppo",message:"Sei sicuro di voler eliminare questo gruppo? Gli utenti in questo gruppo perderanno questi permessi.",confirm:"Elimina gruppo"},editor:{title:"Modifica gruppo",createTitle:"Crea gruppo",search:"Cerca permessi...",selectAll:"Seleziona tutto",clearAll:"Deseleziona tutto",permissionsSelected:"{{count}} selezionati",noResults:"Nessun permesso corrisponde alla ricerca"}},users:{title:"Gestione utenti",subtitle:"Gestisci utenti e accesso alla tua istanza Bambuddy",backToSettings:"Torna a Impostazioni",createUser:"Crea utente",noPermission:"Non hai il permesso di accedere a questa pagina.",admin:"Admin",noGroups:"Nessun gruppo",active:"Attivo",inactive:"Inattivo",edit:"Modifica",delete:"Elimina",system:"Sistema",noGroupsAvailable:"Nessun gruppo disponibile",table:{username:"Nome utente",groups:"Gruppi",status:"Stato",actions:"Azioni"},toast:{created:"Utente creato con successo",updated:"Utente aggiornato con successo",deleted:"Utente eliminato con successo",fillRequired:"Compila tutti i campi obbligatori",passwordsDoNotMatch:"Le password non coincidono",passwordTooShort:"La password deve essere di almeno 6 caratteri"},modal:{createUser:"Crea utente",editUser:"Modifica utente",cancel:"Annulla",creating:"Creazione...",saving:"Salvataggio...",saveChanges:"Salva modifiche",advancedAuthSubtitle:"con autenticazione avanzata"},form:{username:"Nome utente",usernamePlaceholder:"Inserisci nome utente",email:"Email",emailPlaceholder:"utente@esempio.com",password:"Password",passwordPlaceholder:"Inserisci password",confirmPassword:"Conferma password",confirmPasswordPlaceholder:"Conferma password",newPasswordPlaceholder:"Inserisci nuova password",confirmNewPasswordPlaceholder:"Conferma nuova password",leaveBlankToKeep:"lascia vuoto per mantenere attuale",groups:"Gruppi",optional:"opzionale",autoGeneratedPassword:"Una password sicura verrà generata automaticamente e inviata via email all'utente.",passwordManagedByAdvancedAuth:`La password è gestita dall'autenticazione avanzata. Usa "Reimposta password" per inviare una nuova password all'utente via email.`,resetPassword:"Reimposta password",resettingPassword:"Reimpostazione password..."},deleteModal:{title:"Elimina utente",message:"Sei sicuro di voler eliminare questo utente? Questa azione non può essere annullata.",confirm:"Elimina utente"}},streamOverlay:{title:"Overlay stream",invalidPrinterId:"ID stampante non valido",cameraStream:"Stream camera",progress:"Avanzamento",eta:"ETA",printerIdle:"Stampante inattiva",printerOffline:"Stampante offline",status:{printing:"In stampa",paused:"In pausa",finished:"Completata",failed:"Fallita",idle:"Inattiva",unknown:"Sconosciuto"}},profiles:{title:"Profili",subtitle:"Gestisci preset slicer e calibrazioni pressure advance",tabs:{cloud:"Profili cloud",local:"Profili locali",kprofiles:"K-Profiles"},localProfiles:{title:"Profili locali",subtitle:"Importa e gestisci preset slicer da OrcaSlicer",import:"Importa profili",importDesc:"Trascina file .bbscfg, .bbsflmt, .orca_filament, .zip o .json qui",importing:"Importazione...",search:"Cerca preset locali...",noPresets:"Nessun preset locale ancora",badge:"Locale",edit:"Modifica",delete:"Elimina",cancel:"Annulla",deleteConfirmTitle:"Elimina preset",deleteConfirm:"Sei sicuro di voler eliminare questo preset? Questa azione non può essere annullata.",source:"Fonte",inheritsFrom:"Eredita da",filamentType:"Tipo",vendor:"Produttore",compatiblePrinters:"Stampanti",nozzleTemp:"Temp. ugello",cost:"Costo",density:"Densità",pressureAdvance:"Pressure Advance",filament:"Filamento",process:"Processo",printer:"Stampante",toast:{importSuccess:"{{count}} preset importati",importSkipped:"{{count}} preset saltati (duplicati)",importError:"{{count}} errori durante l'importazione",deleted:"Preset eliminato",updated:"Preset aggiornato"}},connectedAs:"Connesso come",logout:"Esci",noLogoutPermission:"Non hai il permesso di disconnetterti",failedToLoad:"Caricamento profili fallito",retry:"Riprova",time:{justNow:"Proprio ora",minsAgo:"{{count}}m fa",hoursAgo:"{{count}}h fa",daysAgo:"{{count}}g fa"},toast:{loggedOut:"Disconnesso"},login:{title:"Connetti a Bambu Cloud",subtitle:"Sincronizza i preset del slicer tra dispositivi",email:"Email",password:"Password",region:"Regione",regionGlobal:"Globale",regionChina:"Cina",verificationCode:"Codice di verifica",totpCode:"Codice autenticatore",checkEmail:"Controlla la tua email ({{email}}) per un codice a 6 cifre",enterTotpHint:"Inserisci il codice a 6 cifre dalla tua app autenticatore",accessToken:"Access Token",accessTokenHint:"Incolla il tuo access token Bambu Lab (da Bambu Studio)",back:"Indietro",loginButton:"Accedi",verifyButton:"Verifica",setTokenButton:"Imposta token",useToken:"Usa access token invece",useEmail:"Accedi con email invece",toast:{loggedIn:"Accesso riuscito",codeSent:"Codice di verifica inviato via email",enterTotp:"Inserisci il codice dalla tua app autenticatore",tokenSet:"Token impostato con successo"}},presets:{myPreset:"Il mio preset (modificabile)",duplicate:"Duplica",editable:"Modificabile",failedToLoadDetails:"Caricamento dettagli preset fallito",deleteConfirm:"Eliminare questo preset?",deleteWarning:'Questo eliminerà definitivamente "{{name}}" da Bambu Cloud. Questa azione non può essere annullata.',noDuplicatePermission:"Non hai il permesso di duplicare preset",noEditPermission:"Non hai il permesso di modificare preset",noDeletePermission:"Non hai il permesso di eliminare preset",types:{filament:"Preset filamento",printer:"Preset stampante",process:"Preset processo"},toast:{deleted:"Preset eliminato",created:"Preset creato",updated:"Preset aggiornato",duplicated:"Preset duplicato",fieldAdded:'Campo "{{key}}" aggiunto',exported:"Preset esportato"},baseLabel:"Base: {{name}}",currentLabel:"Corrente: {{name}}",newPreset:"Nuovo preset",editPreset:"Modifica preset",duplicatePreset:"Duplica preset",createNewPreset:"Crea nuovo preset",customizeSettings:"Personalizza le impostazioni per il nuovo preset",compareWithBase:"Confronta con base",compare:"Confronta",basePreset:"Preset base",selectBasePreset:"Seleziona preset base...",presetName:"Nome preset",myCustomPreset:"Il mio preset personalizzato",inheritsFrom:"Deriva da",dropJsonToImport:"Rilascia JSON per importare",tabs:{common:"Comune",allFields:"Tutti i campi"},availableFields:"Campi disponibili",searchFieldsPlaceholder:"Cerca campi...",noMatchingFields:"Nessun campo corrispondente",allFieldsAdded:"Tutti i campi aggiunti",addCustomField:"Aggiungi campo personalizzato",yourOverrides:"Le tue override",noOverridesYet:"Nessun override ancora",clickFieldsToAdd:"Clicca i campi a sinistra per aggiungerli",saveAsTemplate:"Salva come template",jsonTip:"Suggerimento: trascina e rilascia un file .json ovunque in questa modale per importare impostazioni"},cloudView:{searchPlaceholder:"Cerca preset...",templates:"Template",refresh:"Aggiorna",newPreset:"Nuovo preset",clearFilters:"Pulisci filtri",compareMode:"Modalita confronto",selectAnotherPreset:"Seleziona un altro preset {{type}}",clickTwoPresets:"Clicca due preset dello stesso tipo per confrontare",selectFirst:"1. Seleziona il primo",selectSecond:"2. Seleziona il secondo",compareNow:"Confronta ora",lastSynced:"Ultima sincronizzazione:",showingCount:"Mostrati {{showing}} di {{total}} preset",noPresetsFound:"Nessun preset trovato",columns:{filament:"Filamento",process:"Processo",printer:"Stampante"},noFilamentPresets:"Nessun preset filamento",noProcessPresets:"Nessun preset processo",noPrinterPresets:"Nessun preset stampante",filters:{type:"Tipo",owner:"Proprietario",printer:"Stampante",nozzle:"Ugello",filament:"Filamento",layer:"Layer",all:"Tutti",myPresets:"I miei preset",builtIn:"Integrati",process:"Processo"},noTemplatesPermission:"Non hai il permesso di gestire i template",noRefreshPermission:"Non hai il permesso di aggiornare i profili",noCreatePermission:"Non hai il permesso di creare preset"},templates:{title:"Template rapidi",noTemplates:"Nessun template ancora",createFirst:"Crea template dall'editor preset",typeFilter:"Tipo:",deleteTitle:"Elimina template",deleteWarning:"Questa azione non può essere annullata",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',namePlaceholder:"Nome template",descriptionPlaceholder:"Descrizione",settingsJson:"Impostazioni (JSON)",fieldsCount:"{{count}} campi",shownInModals:"Mostrati nelle modali",hiddenInModals:"Nascosti nelle modali",apply:"Applica",toast:{deleted:"Template eliminato",updated:"Template aggiornato",created:"Template creato",applied:"Template applicato"}}},support:{debugLoggingActive:"Log debug attivo",manageLogs:"Gestisci",collectItem7:"Connettività stampante e versioni firmware",collectItem8:"Stato integrazioni (Spoolman, MQTT, HA)",collectItem9:"Interfacce di rete (solo subnet)",collectItem10:"Versioni dei pacchetti Python",collectItem11:"Controlli di integrità del database",collectItem12:"Dettagli dell'ambiente Docker"},fileManager:{title:"Gestore file",subtitle:"Organizza e gestisci i tuoi file di stampa",uploadFiles:"Carica file",newFolder:"Nuova cartella",folderName:"Nome cartella",folderNamePlaceholder:"es., Parti funzionali",renameFile:"Rinomina file",renameFolder:"Rinomina cartella",moveFiles:"Sposta {{count}} file",rootNoFolder:"Root (nessuna cartella)",current:"corrente",linkFolder:"Collega cartella",linkFolderDescription:'Collega "{{name}}" a un progetto o archivio per accesso rapido.',project:"Progetto",archive:"Archivio",noProjectsFound:"Nessun progetto trovato",noArchivesFound:"Nessun archivio trovato",unlink:"Scollega",link:"Collega",dragDropFiles:"Trascina e rilascia file qui",dropFilesHere:"Rilascia file qui",orClickToBrowse:"oppure clicca per sfogliare",allFileTypesSupported:"Tutti i tipi di file supportati. I file ZIP saranno estratti.",zipFilesDetected:"File ZIP rilevati",zipExtractOptions:"I file ZIP saranno estratti. Scegli come gestire la struttura cartelle:",preserveZipStructure:"Mantieni struttura cartelle dal ZIP",createFolderFromZip:"Crea cartella dal nome ZIP",stlThumbnailGeneration:"Generazione miniature STL",zipMayContainStl:"I file ZIP possono contenere STL. Le miniature possono essere generate durante l'estrazione.",thumbnailsCanBeGenerated:"Le miniature possono essere generate per file STL. I modelli grandi possono richiedere più tempo.",generateThumbnailsForStl:"Genera miniature per file STL",threemfDetected:"File 3MF rilevati",threemfExtractionInfo:"Modello stampante, materiale, colore e impostazioni stampa saranno estratti automaticamente dai file 3MF.",willBeExtracted:"Sara estratto",filesExtracted:"{{count}} file estratti",uploadComplete:"Caricamento completato: {{succeeded}} riusciti",uploadFailed:"Caricamento fallito",zipFilesFailed:"{{count}} file falliti",uploading:"Caricamento...",changeLink:"Cambia collegamento...",linkTo:"Collega a...",linkToProjectOrArchive:"Collega a progetto o archivio",addToQueue:"Aggiungi alla coda",schedulePrint:"Pianifica",generateThumbnail:"Genera miniatura",generateThumbnails:"Genera miniature",generateThumbnailsForMissing:"Genera miniature per STL senza miniatura",gridView:"Vista griglia",listView:"Vista elenco",lowDiskSpaceWarning:"Avviso spazio disco basso",lowDiskSpaceDetails:"Solo {{free}} liberi su {{total}} totali. La soglia e {{threshold}} GB nelle impostazioni.",files:"File",folders:"Cartelle",size:"Dimensione",free:"Libero",allFiles:"Tutti i file",wrap:"A capo",enableTextWrapping:"Abilita a capo testo",disableTextWrapping:"Disabilita a capo testo",collapse:"Comprimi",collapseFoldersByDefault:"Comprimi le cartelle per impostazione predefinita",expandFoldersByDefault:"Espandi le cartelle per impostazione predefinita",dragToResizeTooltip:"Trascina per ridimensionare, doppio clic per reset",searchFiles:"Cerca file...",allTypes:"Tutti i tipi",prints:"Stampe",ascending:"Crescente",descending:"Decrescente",resultsCount:"{{showing}} di {{total}} file",selectAll:"Seleziona tutto",deselectAll:"Deseleziona tutto",selected:"{{count}} selezionati",adding:"Aggiunta...",loadingFiles:"Caricamento file...",folderIsEmpty:"La cartella e vuota",noFilesYet:"Nessun file ancora",folderEmptyDescription:"Carica file o sposta file in questa cartella per iniziare.",noFilesDescription:"Carica file per iniziare a organizzare i file di stampa.",noMatchingFiles:"Nessun file corrispondente",noMatchingFilesDescription:"Nessun file corrisponde ai criteri di ricerca o filtro.",clearFilters:"Pulisci filtri",printedCount:"Stampato {{count}}x",uploadedBy:"Caricato da",deleteFolder:"Elimina cartella",deleteFile:"Elimina file",deleteFilesCount:"Elimina {{count}} file",deleteFolderConfirm:"Sei sicuro di voler eliminare questa cartella? Tutti i file dentro saranno eliminati.",deleteFileConfirm:"Sei sicuro di voler eliminare questo file?",deleteFilesConfirm:"Sei sicuro di voler eliminare {{count}} file selezionati? Questa azione non può essere annullata.",deleting:"Eliminazione...",noPermissionRenameFolder:"Non hai il permesso di rinominare cartelle",noPermissionLinkFolder:"Non hai il permesso di collegare cartelle",noPermissionDeleteFolder:"Non hai il permesso di eliminare cartelle",noPermissionPrint:"Non hai il permesso di stampare",noPermissionSlice:"You do not have permission to slice files",noPermissionAddToQueue:"Non hai il permesso di aggiungere alla coda",noPermissionDownload:"Non hai il permesso di scaricare file",noPermissionRenameFile:"Non hai il permesso di rinominare questo file",noPermissionGenerateThumbnail:"Non hai il permesso di generare miniature",noPermissionDeleteFile:"Non hai il permesso di eliminare questo file",noPermissionCreateFolder:"Non hai il permesso di creare cartelle",noPermissionUpload:"Non hai il permesso di caricare file",noPermissionMoveFiles:"Non hai il permesso di spostare file",noPermissionDeleteFiles:"Non hai il permesso di eliminare file",linkExternal:"Collega esterno",linkExternalFolder:"Collega cartella esterna",linkExternalFolderDescription:"Monta una directory host (NAS, USB, condivisione di rete) nel File Manager. I file non vengono copiati — vengono letti direttamente dal percorso originale.",externalFolderNamePlaceholder:"es. Stampe NAS",externalPath:"Percorso host",externalPathHelp:"Percorso assoluto della directory sull'host Docker. Deve essere montato come bind nel container.",readOnly:"Sola lettura",readOnlyHelp:"impedisce caricamenti e cancellazioni",showHiddenFiles:"Mostra file nascosti (file punto)",externalFolder:"Cartella esterna",scanFolder:"Scansiona",toast:{folderCreated:"Cartella creata",folderDeleted:"Cartella eliminata",fileDeleted:"File eliminato",filesDeleted:"Eliminati {{count}} file",filesMoved:"File spostati",folderLinked:"Cartella collegata",folderUnlinked:"Cartella scollegata",externalFolderLinked:"Cartella esterna collegata e scansionata",folderScanned:"Scansione completata: {{added}} aggiunti, {{removed}} rimossi",addedToQueue:"Aggiunti {{count}} file alla coda",addedToQueuePartial:"Aggiunti {{added}} file, {{failed}} falliti",failedToAddToQueue:"Aggiunta file fallita: {{error}}",fileRenamed:"File rinominato",folderRenamed:"Cartella rinominata",thumbnailsGenerated:"Generate {{count}} miniature",thumbnailsGeneratedPartial:"Generate {{succeeded}} miniature, {{failed}} fallite",noStlMissingThumbnails:"Nessun file STL senza miniature",failedToGenerateThumbnails:"Generazione miniature fallita: {{error}}",thumbnailGenerated:"Miniatura generata",failedToGenerateThumbnail:"Generazione miniatura fallita: {{error}}"}},projects:{title:"Progetti",subtitle:"Organizza e traccia i tuoi progetti di stampa 3D",newProject:"Nuovo progetto",editProject:"Modifica progetto",deleteProject:"Elimina progetto",projectName:"Nome progetto",description:"Descrizione",noProjects:"Nessun progetto ancora",noProjectsFiltered:"Nessun progetto {{status}}",noProjectsFilteredHelp:"Non hai progetti {{status}}. I progetti appariranno qui quando il loro stato cambia.",createFirst:"Crea il tuo primo progetto per organizzare stampe correlate, tracciare progressi e gestire i tuoi build.",createFirstButton:"Crea il tuo primo progetto",create:"Crea",files:"File",prints:"Stampe",plates:"piatti",parts:"parti",lastModified:"Ultima modifica",deleteConfirm:"Sei sicuro di voler eliminare questo progetto? Archivi e elementi in coda saranno scollegati ma non eliminati.",addFiles:"Aggiungi file",removeFile:"Rimuovi file",viewDetails:"Vedi dettagli",namePlaceholder:"es., Build Voron 2.4",descriptionPlaceholder:"Descrizione opzionale...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"L'URL deve iniziare con http:// o https://",openExternalUrl:"Apri URL del progetto",coverImageLabel:"Immagine di copertina",coverImageAlt:"Immagine di copertina del progetto",coverImageUpload:"Carica",coverImageReplace:"Sostituisci",coverImageRemove:"Rimuovi",color:"Colore",targetPlates:"Piatti target",targetPlatesPlaceholder:"es., 25",targetPlatesHelp:"Numero di job di stampa",targetParts:"Parti target",targetPartsPlaceholder:"es., 150",targetPartsHelp:"Totale oggetti necessari",tagsLabel:"Tag (separati da virgola)",tagsPlaceholder:"es., voron, funzionale, regalo",dueDate:"Data scadenza",priority:"Priorita",priorityLow:"Bassa",priorityNormal:"Normale",priorityHigh:"Alta",priorityUrgent:"Urgente",statusActive:"Attivo",statusCompleted:"Completato",statusArchived:"Archiviato",done:"Fatto",completed:"completato",failed:"fallito",inQueue:"in coda",noPrintsYet:"Nessuna stampa ancora",printJobs:"Job di stampa (piatti)",partsPrinted:"Parti stampate",failedParts:"Parti fallite",import:"Importa",export:"Esporta",importProject:"Importa progetto",exportAll:"Esporta tutti i progetti",loading:"Caricamento progetti...",noEditPermission:"Non hai il permesso di modificare progetti",noDeletePermission:"Non hai il permesso di eliminare progetti",noCreatePermission:"Non hai il permesso di creare progetti",noImportPermission:"Non hai il permesso di importare progetti",noExportPermission:"Non hai il permesso di esportare progetti",toast:{created:"Progetto creato",updated:"Progetto aggiornato",deleted:"Progetto eliminato",imported:"Progetto importato",multipleImported:"{{count}} progetti importati",importFailed:"Import fallito",exported:"Progetti esportati (solo metadati)"}},projectDetail:{notFound:"Progetto non trovato",backToProjects:"Torna a Progetti",export:"Esporta",exportProject:"Esporta progetto",noExportPermission:"Non hai il permesso di esportare progetti",noEditPermission:"Non hai il permesso di modificare progetti",partOf:"Parte di:",priorityLabel:"Priorita:",noPrints:"Nessuna stampa in questo progetto ancora",status:{active:"Attivo",completed:"Completato",archived:"Archiviato"},priority:{low:"Bassa",normal:"Normale",high:"Alta",urgent:"Urgente"},dueDate:{overdue:"Scaduto",today:"Scade oggi",daysLeft:"{{count}} giorni rimanenti"},progress:{platesProgress:"Avanzamento piatti",partsProgress:"Avanzamento parti",printJobs:"job di stampa",parts:"parti",percentComplete:"{{percent}}% completato",remaining:"{{count}} rimanenti"},stats:{printJobs:"Job di stampa",total:"totale",failed:"{{count}} falliti",partsPrinted:"{{count}} parti stampate",printTime:"Tempo di stampa",filamentUsed:"Filamento usato"},cost:{title:"Tracciamento costi",filamentCost:"Costo filamento",energy:"Energia",totalCost:"Costo totale",total:"Totale",includesBom:"incl. distinta materiali",budget:"Budget",remaining:"Rimanente"},subProjects:{title:"Sotto-progetti ({{count}})"},notes:{title:"Note",noEditPermission:"Non hai il permesso di modificare le note",placeholder:"Aggiungi note su questo progetto...",empty:"Nessuna nota ancora. Clicca Modifica per aggiungere note."},files:{title:"File",linkFolders:"Collega cartelle dal Gestore file",forQuickAccess:"a questo progetto per accesso rapido.",fileCount:"{{count}} file",empty:"Nessuna cartella collegata. Vai a Gestore file e collega una cartella a questo progetto.",noFiles:"Nessun file in questa cartella.",print:"Stampa ora",addToQueue:"Aggiungi alla coda"},bom:{title:"Distinta materiali",acquired:"{{completed}}/{{total}} acquisiti",showAll:"Mostra tutti",hideDone:"Nascondi completati",addPart:"Aggiungi parte",noAddPermission:"Non hai il permesso di aggiungere parti",partNamePlaceholder:"Nome parte (es., viti M3x8)",partName:"Nome parte",qty:"Qta",price:"Prezzo ({{currency}})",sourcingUrlPlaceholder:"URL fornitura (opzionale)",remarksPlaceholder:"Note (opzionale)",deletePart:"Elimina parte",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"?',noUpdatePermission:"Non hai il permesso di aggiornare parti",noEditPermission:"Non hai il permesso di modificare parti",noDeletePermission:"Non hai il permesso di eliminare parti",totalCost:"Costo totale:",empty:"Nessuna parte nella distinta materiali. Aggiungi hardware, elettronica o altri componenti da reperire."},timeline:{title:"Timeline attivita",empty:"Nessuna attivita ancora."},template:{saveAsTemplate:"Salva come template",noCreatePermission:"Non hai il permesso di creare template"},queue:{title:"Coda",viewAll:"Vedi tutto",printing:"{{count}} in stampa",queued:"{{count}} in coda"},prints:{title:"Stampe ({{count}})"},toast:{projectUpdated:"Progetto aggiornato",partAdded:"Parte aggiunta",partRemoved:"Parte rimossa",exportFailed:"Export fallito",projectExported:"Progetto esportato",templateCreated:"Template creato"}},system:{title:"Informazioni sistema",version:"Versione",uptime:"Tempo attivo",cpuUsage:"Uso CPU",memoryUsage:"Uso memoria",diskUsage:"Uso disco",networkInfo:"Info rete",logs:"Log",debugMode:"Modalita debug",enableDebug:"Abilita log debug",disableDebug:"Disabilita log debug",downloadLogs:"Scarica log",clearLogs:"Cancella log",dockerInfo:"Info Docker",containerName:"Nome container",imageName:"Nome immagine",platform:"Piattaforma",architecture:"Architettura"},library:{title:"Libreria filamenti",addFilament:"Aggiungi filamento",editFilament:"Modifica filamento",deleteFilament:"Elimina filamento",vendor:"Produttore",material:"Materiale",color:"Colore",kFactor:"K Factor",temperature:"Temperatura",noFilaments:"Nessun filamento in libreria",deleteConfirm:"Sei sicuro di voler eliminare questo filamento?",importFromPrinter:"Importa da stampante",exportToFile:"Esporta su file"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Integrazione Spoolman",enabled:"Spoolman abilitato",url:"URL Spoolman",connected:"Connesso",disconnected:"Non connesso",testConnection:"Testa connessione",sync:"Sincronizza",syncing:"Sincronizzazione...",lastSync:"Ultima sincronizzazione",linkToSpoolman:"Collega a Spoolman",openInSpoolman:"Apri in Spoolman",unlinkSpool:"Scollega bobina",unlinkConfirmTitle:"Scollegare bobina?",unlinkConfirmMessage:"Questo disconnetterà lo spool da Spoolman. I dati dello spool in Spoolman rimarranno invariati.",selectSpool:"Seleziona bobina",noUnlinkedSpools:"Nessuna bobina scollegata disponibile",linkSuccess:"Bobina collegata a Spoolman con successo",linkFailed:"Collegamento bobina fallito",unlinkSuccess:"Bobina scollegata da Spoolman con successo",unlinkFailed:"Impossibile scollegare la bobina",spoolId:"ID bobina",fillSourceLabel:"(Spoolman)",weight:"Peso",remaining:"Rimanente",disableWeightSync:"Disabilita sync peso stimato AMS",disableWeightSyncDesc:"Non aggiornare la capacità rimanente dalle stime AMS. Usalo se preferisci il tracciamento di Spoolman rispetto alle stime AMS. Le nuove bobine useranno comunque la stima AMS come peso iniziale.",reportPartialUsage:"Segnala uso parziale per stampe fallite",reportPartialUsageDesc:"Quando una stampa fallisce o viene annullata, segnala il filamento stimato usato fino a quel punto in base all'avanzamento layer."},inventory:{title:"Inventario Bobine",spoolmanMixedContentTitle:"Spoolman non può essere caricato tramite HTTPS — contenuto misto bloccato dal browser",spoolmanMixedContentBody:"Bambuddy viene servito tramite HTTPS (dietro il tuo reverse proxy), ma l'URL di Spoolman è ancora HTTP. I browser bloccano il contenuto misto per motivi di sicurezza, quindi l'interfaccia Spoolman incorporata non può essere visualizzata. Anche Spoolman deve essere raggiungibile via HTTPS.",spoolmanMixedContentFixReverseProxy:"Metti Spoolman dietro lo stesso reverse proxy di Bambuddy (Traefik / Nginx / Caddy) in HTTPS, poi aggiorna l'URL di Spoolman nelle Impostazioni con il nuovo indirizzo HTTPS.",spoolmanMixedContentFixOpenNewTab:"Come alternativa, apri Spoolman in una nuova scheda via HTTP — le regole sul contenuto misto si applicano solo ai frame incorporati, una scheda autonoma funziona.",spoolmanOpenInNewTab:"Apri Spoolman in una nuova scheda",addSpool:"Aggiungi Bobina",editSpool:"Modifica Bobina",material:"Materiale",selectMaterial:"Seleziona materiale...",subtype:"Sottotipo",brand:"Marchio",searchBrand:"Cerca marchio...",useCustomBrand:'Usa "{{brand}}"',useCustomMaterial:"Usa materiale personalizzato: {{material}}",colorName:"Nome Colore",colorNamePlaceholder:"Jade White, Fire Red...",color:"Colore",hexColor:"Colore Hex",pickColor:"Scegli colore personalizzato",labelWeight:"Peso da Etichetta",coreWeight:"Peso Bobina Vuota",searchSpoolWeight:"Cerca peso bobina...",weightUsed:"Utilizzato",currentWeight:"Peso Rimanente",measuredWeight:"Peso Misurato",spoolName:"Bobina",costPerKg:"Costo per kg",measuredWeightError:"Il peso misurato deve essere compreso tra {{min}}g e {{max}}g.",slicerFilament:"Filamento Slicer",slicerFilamentName:"Nome Preset Slicer",slicerPreset:"Preset Slicer",searchPresets:"Cerca preset filamento...",selectedPreset:"Selezionato",noPresetsFound:"Nessun preset trovato",tempOverrides:"Override Temperatura",note:"Nota",notePlaceholder:"Eventuali note aggiuntive su questa bobina...",category:"Categoria",categoryPlaceholder:"es. Produzione, Prototipo, Cliente A",categoryNone:"Senza categoria",lowStockThresholdOverride:"Soglia scorte basse (questa bobina)",lowStockThresholdOverrideHelp:"Lascia vuoto per usare la soglia globale ({{global}}%).",clearRfid:"Cancella tag RFID",rfidCleared:"Tag RFID cancellato",archive:"Archivia",restore:"Ripristina",noSpools:"Ancora nessuna bobina. Aggiungi la tua prima bobina per iniziare.",noAvailableSpools:"Nessuna bobina disponibile. Aggiungi una bobina al tuo inventario o rimuovine l'assegnazione da un altro slot.",kProfiles:"K-Profiles",addKProfile:"Aggiungi K-Profile",assignSpool:"Assegna Bobina",unassignSpool:"Scollega",assignSuccess:"Bobina assegnata e slot AMS configurato",assignFailed:"Assegnazione bobina fallita",selectSpool:"Seleziona una bobina da assegnare a questo slot",assigned:"Assegnato",assigning:"Assegnazione...",searchSpools:"Cerca bobine...",showAllSpools:"Mostra tutte le bobine",allMaterials:"Tutti i Materiali",filterByBrand:"Filtra per marchio...",showArchived:"Mostra archiviate",quickAdd:"Aggiunta rapida (Scorta)",quantity:"Quantità",stock:"Scorta",configured:"Configurata",spoolsCreated:"{{count}} bobine create",spoolCreated:"Bobina creata",spoolUpdated:"Bobina aggiornata",spoolDeleted:"Bobina eliminata",spoolArchived:"Bobina archiviata",spoolRestored:"Bobina ripristinata",deleteConfirm:"Sei sicuro di voler eliminare questa bobina? Questa azione non può essere annullata.",archiveConfirm:"Sei sicuro di voler archiviare questa bobina?",advancedSettings:"Impostazioni Avanzate",filamentInfoTab:"Info filamento",paProfileTab:"Profilo PA",filamentInfo:"Filamento",additional:"Aggiuntivo",loadingPresets:"Caricamento preset cloud...",cloudConnected:"Cloud connesso",cloudNotConnected:"Cloud non connesso (valori predefiniti)",recentColors:"Recenti",searchColors:"Cerca colori...",searchResults:"Risultati della ricerca",allColors:"Tutti i colori",commonColors:"Colori comuni",showLess:"Mostra meno",showAll:"Mostra tutto",noColorsFound:"Nessun colore corrisponde alla ricerca",noResults:"Nessun risultato trovato",extraColorsLabel:"Extra colours",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.",extraColorsInvalid:"Ignored invalid hex: {{tokens}}",colorEffectLabel:"Effect",colorEffect:{none:"None",sparkle:"Sparkle",wood:"Wood",marble:"Marble",glow:"Glow",matte:"Matte",silk:"Silk",galaxy:"Galaxy",rainbow:"Rainbow",metal:"Metal",translucent:"Translucent",gradient:"Gradient",dualColor:"Dual Color",triColor:"Tri Color",multicolor:"Multicolor"},selectMaterialFirst:"Selezionare prima un materiale nella scheda Info filamento.",noPrintersConfigured:"Nessuna stampante configurata. Aggiungi stampanti per usare i profili PA.",matchingFilter:"Corrispondenti",anyBrand:"Qualsiasi marca",anyVariant:"Qualsiasi variante",autoSelect:"Selezione automatica",matches:"corrispondenze",match:"corrispondenza",noMatches:"Nessuna corrispondenza",connected:"Connessa",offline:"Offline",printerOffline:"La stampante è offline. Connetti per visualizzare i profili di calibrazione.",noKProfilesMatch:"Nessun profilo K corrisponde al filamento selezionato.",leftNozzle:"Ugello sinistro",rightNozzle:"Ugello destro",profilesSelected:"profili di calibrazione selezionati",totalInventory:"Inventario totale",totalConsumed:"Totale consumato",byMaterial:"Per materiale",inPrinter:"In stampante",lowStock:"Scorta bassa",sinceTracking:"Dall'inizio del tracciamento",loadedInAms:"Caricato in AMS/Est",remaining:"Rimanente",weightCheck:"Controllo Peso",lastWeighed:"Ultima pesatura",neverWeighed:"Mai pesato",search:"Cerca bobine...",showing:"Visualizzazione",to:"a",of:"di",show:"Mostra",spools:"bobine",spool:"bobina",page:"Pagina",noSpoolsMatch:"Nessun risultato trovato",noSpoolsMatchDesc:"Prova a modificare la ricerca o i filtri per trovare quello che cerchi.",active:"Attive",archived:"Archiviate",all:"Tutte",used:"Usato",new:"Nuovo",clearFilters:"Cancella filtri",table:"Tabella",cards:"Schede",net:"Netto",groupSimilar:"Raggruppa",groupedSpools:"{{count}} bobine identiche",groupedRows:"righe",columns:"Colonne",configureColumns:"Configura colonne",configureColumnsDesc:"Trascina per riordinare le colonne o usa le frecce. Attiva/disattiva la visibilità con l'icona dell'occhio.",visible:"visibili",reset:"Ripristina",cancel:"Annulla",applyChanges:"Applica modifiche",moveUp:"Sposta su",moveDown:"Sposta giù",hideColumn:"Nascondi colonna",showColumn:"Mostra colonna",linkToSpool:"Collega a bobina",tagLinked:"Tag collegato alla bobina",tagLinkFailed:"Impossibile collegare il tag",tagAlreadyLinked:"Tag già collegato a un'altra bobina",unknownTag:"Tag RFID sconosciuto rilevato",usageHistory:"Cronologia utilizzo",noUsageHistory:"Nessun utilizzo registrato",printName:"Nome stampa",weightConsumed:"Peso consumato",clearHistory:"Cancella",historyCleared:"Cronologia utilizzo cancellata",fillSourceLabel:"(Inv)",lowStockThresholdError:"La soglia deve essere tra 0.1 e 99.9",assignMismatchTitle:"Materiale non corrispondente",assignMismatchMessage:'Il materiale della bobina selezionata "{{spoolMaterial}}" non corrisponde al materiale del vassoio "{{trayMaterial}}" per {{location}}. Assegnare comunque?',assignMismatchConfirm:"Assegna comunque",assignPartialMismatchMessage:'Il materiale della bobina "{{spoolMaterial}}" è simile ma non corrisponde esattamente a "{{trayMaterial}}" in {{location}}. Vuoi procedere?',assignProfileMismatchMessage:'Il profilo della bobina "{{spoolProfile}}" non corrisponde al profilo del vassoio "{{trayProfile}}" in {{location}}. Vuoi procedere?'},timelapse:{title:"Timelapse",create:"Crea timelapse",download:"Scarica",delete:"Elimina",preview:"Anteprima",frameRate:"Frame rate",quality:"Qualità",processing:"Elaborazione...",noTimelapses:"Nessun timelapse disponibile"},ams:{title:"AMS",slot:"Slot",empty:"Vuoto",emptySlot:"Slot vuoto",unknown:"Sconosciuto",humidity:"Umidità",temperature:"Temperatura",filamentType:"Tipo filamento",filamentColor:"Colore",remaining:"Rimanente",history:"Cronologia AMS",noHistory:"Nessuna cronologia disponibile",configureSlot:"Configura slot",externalSpool:"Bobina esterna",profile:"Profilo",kFactor:"K Factor",fill:"Livello",configure:"Configura",used:"utilizzato",remainingUnit:"rimanente"},printModal:{title:"Avvia stampa",selectPrinter:"Seleziona stampante",selectPlate:"Seleziona piatto",filamentMapping:"Mappatura filamento",totalCost:"Costo totale:",slotRemainingShort:" - {{grams}}g rim.",printSettings:"Impostazioni stampa",bedLeveling:"Livellamento piatto",flowCalibration:"Calibrazione flusso",vibrationCalibration:"Calibrazione vibrazioni",layerInspection:"Ispezione primo layer",timelapse:"Timelapse",startPrint:"Avvia stampa",addToQueue:"Aggiungi alla coda",cancel:"Annulla",noPrintersAvailable:"Nessuna stampante disponibile",printerBusy:"Stampante occupata",printerOffline:"Stampante offline",sameTypeDifferentColor:"Stesso tipo, colore diverso",filamentTypeNotLoaded:"Tipo di filamento non caricato",openCalendar:"Apri calendario",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Ugello sinistro",rightNozzleTooltip:"Ugello destro",filamentOverride:"Sostituzione filamento",filamentOverrideHint:"Sostituisci opzionalmente i filamenti per l'assegnazione basata sul modello. Lo scheduler abbinerà i filamenti selezionati invece dei valori 3MF originali.",originalFilament:"Originale",overrideWith:"Sostituisci con",resetToOriginal:"Ripristina originale",insufficientFilamentTitle:"Filamento insufficiente",insufficientFilamentMessage:"Alcune bobine assegnate hanno meno filamento rimanente di quanto necessario per questa stampa:",insufficientFilamentLine:"{{printer}} - {{slot}}: necessita di {{required}}g, rimanenti {{remaining}}g",printAnyway:"Stampa comunque",forceColorMatch:"Forza corrispondenza colore",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Scagliona a {{count}} stampanti",gcodeInjection:"Inietta G-code auto-stampa"},backup:{title:"Backup e ripristino",createBackup:"Crea backup",restoreBackup:"Ripristina backup",restoreDescription:"Sostituisci tutti i dati da un file di backup",downloadBackup:"Scarica backup",uploadBackup:"Carica backup",lastBackup:"Ultimo backup",autoBackup:"Backup automatico",backupNow:"Esegui backup ora",restoreWarning:"Avviso: il ripristino sovrascriverà tutti i dati attuali.",includeArchives:"Includi archivi",includeSettings:"Includi impostazioni",includeProfiles:"Includi profili",backupSuccess:"Backup creato con successo",restoreSuccess:"Backup ripristinato con successo",backupFailed:"Backup fallito",restoreFailed:"Ripristino fallito",restoreNote:"La stampante virtuale verrà fermata durante il ripristino",githubBackup:"Backup GitHub",enabled:"Abilitato",cloudLoginRequired:"Accesso Bambu Cloud richiesto. Accedi in Profili → Profili Cloud per abilitare il backup GitHub.",cloudLoginRequiredShort:"Accesso Cloud richiesto",githubDescription:"Sincronizza automaticamente i tuoi profili con un repository GitHub privato per backup e cronologia delle versioni.",repositoryUrl:"URL del repository",personalAccessToken:"Token di accesso personale",tokenSaved:"(salvato)",enterNewToken:"Inserisci un nuovo token per aggiornare",tokenHint:"Token a grana fine con permesso di lettura/scrittura dei contenuti",branch:"Branch",manualOnly:"Solo manuale",hourly:"Ogni ora",daily:"Giornaliero",weekly:"Settimanale",includeInBackup:"Includi nel backup",kProfiles:"K-Profili",kProfilesDescription:"Calibrazione dell'avanzamento pressione dalle stampanti connesse",noPrintersConnected:"Nessuna stampante connessa",printersConnected:"{{connected}}/{{total}} connesse",cloudProfiles:"Profili Cloud",cloudProfilesDescription:"Preset di filamento, stampante e processo da Bambu Cloud",appSettings:"Impostazioni App",appSettingsDescription:"Configurazione Bambuddy (database completo)",spoolInventory:"Inventario bobine",spoolInventoryDescription:"Bobine di filamento, cronologia utilizzo e tracciamento costi",printArchives:"Archivi di stampa",printArchivesDescription:"Metadati della cronologia di stampa (nessun file gcode/3MF)",lastBackupAt:"Ultimo backup:",noBackupsYet:"Nessun backup ancora",next:"Prossimo:",startingBackup:"Avvio del backup...",test:"Test",enableBackup:"Abilita backup",testConnection:"Testa connessione",enterRepoUrl:"Inserisci l'URL del repository",enterRepoAndToken:"Inserisci l'URL del repository e il token di accesso",repoRequired:"L'URL del repository è obbligatorio",tokenRequired:"Il token di accesso è obbligatorio",githubBackupEnabled:"Backup GitHub abilitato",tokenUpdated:"Token aggiornato",settingsSaved:"Impostazioni salvate",failedToSave:"Salvataggio fallito: {{message}}",backupCompleteFiles:"Backup completato - {{count}} file aggiornati",backupSkippedNoChanges:"Backup saltato - nessuna modifica",backupFailed2:"Backup fallito: {{message}}",clearedLogs:"{{count}} log eliminati",failedToClearLogs:"Eliminazione log fallita: {{message}}",history:"Cronologia",clear:"Cancella",date:"Data",status:"Stato",commit:"Commit",localBackup:"Backup locale",localBackupDescription:"Crea un backup completo dei tuoi dati Bambuddy includendo database, archivi, upload e tutti i file.",downloadBackupLabel:"Scarica backup",completeBackupZip:"Backup completo: database + tutti i file (ZIP)",download:"Scarica",preparingBackup:"Preparazione del backup...",creatingArchive:"Creazione dell'archivio di backup... Potrebbe richiedere del tempo per archivi di grandi dimensioni.",downloadingFile:"Download del file di backup...",backupDownloaded:"Backup scaricato con successo",failedToCreateBackup:"Creazione del backup fallita: {{message}}",restore:"Ripristina",restoreReplacesAll:"Il ripristino sostituisce tutti i dati.",restoreReplacesAllDetail:"Il database e i file attuali verranno completamente sostituiti. È necessario un riavvio dopo il ripristino.",restoreConfirmTitle:"Ripristina backup",restoreConfirmMessage:`Sei sicuro di voler ripristinare da "{{filename}}"? Questo sostituirà completamente il tuo database e tutti i file. L'applicazione dovrà essere riavviata dopo il ripristino.`,restoreConfirmButton:"Ripristina backup",uploadingFile:"Caricamento del file di backup...",backupRestoredRestart:"Backup ripristinato. Riavvia Bambuddy.",failedToRestore:"Ripristino del backup fallito. Controlla il formato del file.",reloadNow:"Ricarica ora",creatingBackup:"Creazione del backup",restoringBackup:"Ripristino del backup",preparing:"Preparazione...",processing:"Elaborazione...",doNotClosePage:"Non chiudere questa pagina e non navigare altrove. Questa operazione potrebbe richiedere diversi minuti per backup di grandi dimensioni.",restoring:"Ripristino in corso...",restoreComplete:"Ripristino completato",restoreFailed2:"Ripristino fallito",importSettings:"Importa impostazioni da un file di backup",pleaseWaitRestoring:"Attendere durante il ripristino dei dati",selectBackupFile:"Clicca per selezionare un file di backup (.json o .zip)",duplicateHandling:"Come funziona la gestione dei duplicati:",matchPrinters:"Stampanti",matchPrintersBy:"corrispondenza per numero di serie",matchSmartPlugs:"Smart Plug",matchSmartPlugsBy:"corrispondenza per indirizzo IP",matchNotificationProviders:"Provider di notifica",matchNotificationProvidersBy:"corrispondenza per nome",matchFilaments:"Filamenti",matchFilamentsBy:"corrispondenza per nome + tipo + marca",matchArchives:"Archivi",matchArchivesBy:"corrispondenza per hash del contenuto (sempre saltato)",matchPendingUploads:"Upload in sospeso",matchPendingUploadsBy:"corrispondenza per nome file",matchSettingsTemplates:"Impostazioni e modelli",matchSettingsTemplatesBy:"sempre sovrascritti",replaceExisting:"Sostituisci dati esistenti",keepExisting:"Mantieni dati esistenti",overwriteDescription:"Sovrascrivi gli elementi già esistenti con i dati del backup",keepDescription:"Ripristina solo gli elementi che non esistono ancora",overwriteCaution:"Attenzione:",overwriteWarning:"La sovrascrittura sostituirà le configurazioni attuali con i dati del backup. I codici di accesso delle stampanti non vengono mai sovrascritti per sicurezza.",cancel:"Annulla",processingBackup:"Elaborazione del file di backup...",itemsRestored:"Elementi ripristinati",itemsSkipped:"Elementi saltati",restored:"Ripristinati",skippedAlreadyExist:"Saltati (già esistenti)",filesCategory:"File (3MF, miniature, ecc.)",andMore:"...e altri {{count}}",newApiKeysGenerated:"Nuove chiavi API generate",keysShownOnce:"Queste chiavi vengono mostrate solo una volta. Copiale ora!",copy:"Copia",noDataFound:"Nessun dato da ripristinare trovato nel file di backup.",close:"Chiudi",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Impostazioni",notification_providers:"Provider di notifica",notification_templates:"Modelli di notifica",smart_plugs:"Smart Plug",printers:"Stampanti",filaments:"Filamenti",maintenance_types:"Tipi di manutenzione",archives:"Archivi",projects:"Progetti",pending_uploads:"Upload in sospeso",external_links:"Link esterni",api_keys:"Chiavi API"}},tags:{title:"Tag",addTag:"Aggiungi tag",editTag:"Modifica tag",deleteTag:"Elimina tag",tagName:"Nome tag",tagColor:"Colore tag",noTags:"Nessun tag",deleteConfirm:"Sei sicuro di voler eliminare questo tag?",manageTags:"Gestisci tag"},uploadModal:{title:"Carica file 3MF",dragDrop:"Trascina e rilascia file .3mf qui",or:"o",browseFiles:"Sfoglia file",extractionInfo:"Il modello stampante sarà estratto automaticamente dai metadati del file 3MF.",uploaded:"caricati",failed:"falliti",uploading:"Caricamento...",upload:"Carica",uploadFailed:"Caricamento fallito"},editArchive:{title:"Modifica archivio",name:"Nome",namePlaceholder:"Nome stampa",printer:"Stampante",noPrinter:"Nessuna stampante",project:"Progetto",noProject:"Nessun progetto",itemsPrinted:"Elementi stampati",itemsPrintedHelp:"Numero di elementi prodotti in questo job di stampa",notes:"Note",notesPlaceholder:"Aggiungi note su questa stampa...",externalLink:"Link esterno",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link a Printables, Thingiverse o altra fonte",tags:"Tag",tagsPlaceholder:"Aggiungi tag...",addMoreTags:"Aggiungi altri tag...",matchingTags:'Tag corrispondenti "{{query}}"',existingTags:"Tag esistenti",clickToAdd:"(clicca per aggiungere)",status:"Stato",failureReason:"Motivo fallimento",selectReason:"Seleziona motivo...",photos:"Foto del risultato stampato",photosHelp:"Clicca + per aggiungere foto del risultato stampato",printResult:"Risultato stampa",saving:"Salvataggio...",failureReasons:{adhesionFailure:"Fallimento adesione",spaghettiDetached:"Spaghetti / staccato",layerShift:"Spostamento layer",cloggedNozzle:"Ugello intasato",filamentRunout:"Filamento esaurito",warping:"Warping",stringing:"Stringing",underExtrusion:"Sotto-estrusione",powerFailure:"Mancanza corrente",userCancelled:"Annullato dall'utente",other:"Altro"},statuses:{completed:"Completato",failed:"Fallito",aborted:"Annullato",printing:"In stampa"}},kProfiles:{title:"K-Profiles",noPrintersConfigured:"Nessuna stampante configurata",addPrinterInSettings:"Aggiungi una stampante in Impostazioni per gestire i K-profiles",noActivePrinters:"Nessuna stampante attiva",enablePrinterConnection:"Abilita una connessione stampante per vedere i K-profiles",loadingProfiles:"Caricamento K-Profiles...",printerOffline:"Stampante offline",printerOfflineDesc:"La stampante selezionata non e connessa. Accendila per vedere i K-profiles.",noMatchingProfiles:"Nessun profilo corrispondente",noMatchingProfilesDesc:"Nessun profilo corrisponde ai criteri di ricerca",noKProfiles:"Nessun K-Profile",noKProfilesDesc:"Nessun profilo pressure advance per ugello da {{diameter}}mm",createFirstProfile:"Crea primo profilo",printer:"Stampante",nozzle:"Ugello",refresh:"Aggiorna",addProfile:"Aggiungi profilo",export:"Esporta",import:"Importa",select:"Seleziona",selectAll:"Seleziona tutto",delete:"Elimina",searchPlaceholder:"Cerca per nome o filamento...",allExtruders:"Tutti gli estrusori",leftOnly:"Solo sinistro",rightOnly:"Solo destro",allFlow:"Tutto flow",hfOnly:"Solo HF",sOnly:"Solo S",sortName:"Ordina: Nome",sortKValue:"Ordina: K-Value",sortFilament:"Ordina: Filamento",leftExtruder:"Estrusore sinistro",rightExtruder:"Estrusore destro",modal:{addTitle:"Aggiungi K-Profile",editTitle:"Modifica K-Profile",profileName:"Nome profilo",profileNamePlaceholder:"Il mio profilo PLA",kValue:"K-Value",kValuePlaceholder:"0.020",kValueHelp:"Intervallo tipico: 0.01 - 0.06 per PLA, 0.02 - 0.10 per PETG",filament:"Filamento",selectFilament:"Seleziona filamento...",noFilamentsHelp:"Nessun filamento trovato. Crea prima un K-profile in Bambu Studio.",flowType:"Tipo flow",highFlow:"High Flow",standard:"Standard",nozzleSize:"Dimensione ugello",extruder:"Estrusore",extruders:"Estrusori",left:"Sinistra",right:"Destra",notes:"Note (salvate localmente)",notesPlaceholder:"Aggiungi note su questo profilo...",notesHelp:"Le note sono salvate in Bambuddy, non sulla stampante",syncing:"Sincronizzazione con stampante...",savingExtruder:"Salvataggio su estrusore {{current}}/{{total}}...",pleaseWait:"Attendere"},deleteConfirm:{title:"Elimina profilo",cannotUndo:"Questo non può essere annullato",message:'Sei sicuro di voler eliminare "{{name}}" dalla stampante?'},bulkDelete:{title:"Elimina profili",cannotUndo:"Questo non può essere annullato",message:"Sei sicuro di voler eliminare {{count}} profili selezionati dalla stampante?"},toast:{profileSaved:"K-profile salvato",profilesSaved:"K-profile salvato su {{count}} estrusori",selectAtLeastOneExtruder:"Seleziona almeno un estrusore",profileDeleted:"K-profile eliminato",profilesDeleted:"Eliminati {{count}} profili",exportedProfiles:"Esportati {{count}} profili",importedProfiles:"Importati {{count}} di {{total}} profili",noProfilesToExport:"Nessun profilo da esportare",invalidFileFormat:"Formato file non valido",failedToParseImport:"Parsing file import fallito",failedToSaveBatch:"Salvataggio K-profiles fallito",noteSaved:"Nota salvata",failedToSaveNote:"Salvataggio nota fallito"},permission:{noRead:"Non hai il permesso di aggiornare i profili",noCreate:"Non hai il permesso di aggiungere profili",noUpdate:"Non hai il permesso di aggiornare K-profiles",noDelete:"Non hai il permesso di eliminare K-profiles",noExport:"Non hai il permesso di esportare profili",noImport:"Non hai il permesso di importare profili"}},virtualPrinter:{title:"Stampante virtuale",running:"In esecuzione",stopped:"Ferma",description:{default:"Abilita una stampante virtuale che appare in Bambu Studio e OrcaSlicer. I file inviati a questa stampante saranno archiviati senza stampare.",proxy:"Abilita un proxy che inoltra il traffico slicer a una stampante reale, permettendo la stampa remota su qualsiasi rete."},enable:{title:"Abilita stampante virtuale",visibleInSlicer:'Visibile come "Bambuddy" nella ricerca slicer',proxyingTo:"In proxy verso {{name}}",notActive:"Non attivo"},model:{title:"Modello stampante",description:"Seleziona il modello stampante da emulare.",restartWarning:"Cambiare il modello riavviera la stampante virtuale"},accessCode:{title:"Codice accesso",isSet:"Codice accesso impostato",notSet:"Nessun codice accesso impostato - richiesto per abilitare",placeholder:"Inserisci codice 8 caratteri",placeholderChange:"Inserisci nuovo codice per cambiare",hint:"Deve essere esattamente 8 caratteri. Usato dagli slicer per autenticarsi.",charCount:"({{count}}/8)"},targetPrinter:{title:"Stampante target",configured:"Target proxy configurato",notConfigured:"Nessuna stampante target selezionata - richiesta per modalita proxy",placeholder:"Seleziona una stampante...",hint:"Seleziona la stampante a cui fare proxy. La stampante deve essere in modalita LAN.",noPrinters:"Nessuna stampante configurata. Aggiungi una stampante per usare la modalita proxy."},remoteInterface:{title:"Sovrascrittura interfaccia di rete",configured:"Sovrascrittura interfaccia attiva",optional:"Opzionale - usare se l'IP rilevato automaticamente e sbagliato (es. piu NIC, Docker, VPN)",placeholder:"Rilevamento automatico (predefinito)...",hint:"Sovrascrive l'indirizzo IP pubblicizzato via SSDP e usato nel certificato TLS. Utile quando Bambuddy ha piu interfacce di rete."},mode:{title:"Modalita",archive:"Archivio",archiveDesc:"Archivia subito i file",review:"Revisione",reviewDesc:"Rivedi prima di archiviare",queue:"Coda",queueDesc:"Archivia e aggiungi alla coda",proxy:"Proxy",proxyDesc:"Inoltra a stampante reale"},autoDispatch:{title:"Avvio automatico",description:"Avvia automaticamente le stampe aggiunte alla coda. Se disattivato, le stampe attendono l'avvio manuale."},tailscaleDisabled:{title:"Integrazione Tailscale",description:"Quando abilitato, utilizza Tailscale per certificati TLS affidabili. Disabilita per utilizzare solo certificati auto-firmati."},setupRequired:{title:"Configurazione necessaria",description:"La stampante virtuale richiede configurazioni di sistema aggiuntive prima di funzionare. Include port forwarding, regole firewall e impostazioni specifiche della piattaforma.",readGuide:"Leggi la guida prima di abilitare"},howItWorks:{title:"Come funziona",step1:"Sulla stessa LAN, le stampanti virtuali appaiono automaticamente nel tuo slicer (Bambu Studio / OrcaSlicer). Da altre reti, aggiungile manualmente tramite indirizzo IP e codice di accesso.",step2:'In modalità Archivio, Revisione e Coda, usa il pulsante "Invia" nel tuo slicer per caricare file 3MF su Bambuddy. Lo slicer mostrerà "Stampa riuscita" — il file viene salvato, non stampato.',step3:"In modalità Proxy, la stampante virtuale inoltra tutto il traffico a una stampante reale — le stampe partono immediatamente come con una connessione diretta."},status:{title:"Dettagli stato",printerName:"Nome stampante",model:"Modello",serialNumber:"Numero seriale",mode:"Modalita",pendingFiles:"File in sospeso",targetPrinter:"Stampante target",ftpPort:"Porta FTP",mqttPort:"Porta MQTT",ftpConnections:"Connessioni FTP",mqttConnections:"Connessioni MQTT"},toast:{updated:"Impostazioni stampante virtuale aggiornate",failedToUpdate:"Aggiornamento impostazioni fallito",tailscaleNotAvailable:"Tailscale non è installato su questo host. Installa prima Tailscale, poi riprova.",copyFailed:"Copia non riuscita — seleziona il testo manualmente",accessCodeRequired:"Imposta prima un codice accesso",targetPrinterRequired:"Seleziona prima una stampante target",bindIpRequired:"Impostare prima un indirizzo IP",accessCodeEmpty:"Il codice accesso non può essere vuoto",accessCodeLength:"Il codice accesso deve essere esattamente 8 caratteri",created:"Stampante virtuale creata",failedToCreate:"Impossibile creare la stampante virtuale",deleted:"Stampante virtuale eliminata",failedToDelete:"Impossibile eliminare la stampante virtuale"},list:{title:"Stampanti virtuali",add:"Aggiungi",addFirst:"Aggiungi stampante virtuale",empty:"Nessuna stampante virtuale configurata. Aggiungine una per iniziare."},bindIp:{title:"Interfaccia di rete",placeholder:"Seleziona interfaccia...",hint:"Interfaccia di rete a cui questa stampante virtuale si collega. Deve essere unica per stampante."},proxy:{accessCodeHint:"In modalita proxy, usa il codice di accesso della stampante di destinazione nello slicer. La connessione viene inoltrata in modo trasparente alla stampante reale."},addDialog:{title:"Aggiungi stampante virtuale",name:"Nome",hint:"Potrai configurare il codice di accesso, la stampante di destinazione e altre impostazioni dopo la creazione.",create:"Crea"},deleteConfirm:{title:"Elimina stampante virtuale",message:'Sei sicuro di voler eliminare "{{name}}"? Tutti i servizi di questa stampante verranno interrotti.'},archiveNameSource:{title:"Origine nome archivio",description:'Scegli come vengono nominati i nuovi archivi quando i file arrivano tramite la stampante virtuale. "Metadati" utilizza il titolo incorporato nello slicer dal 3MF (default). "Nome file" utilizza il nome che Bambu Studio ha inviato via FTP — utile se hai rinominato il job nella finestra "invia a stampante".',metadata:"Metadati",filename:"Nome file"}},modelViewer:{openInSlicer:"Apri nello slicer",tabs:{model:"Modello 3D",gcode:"Anteprima G-code"},notAvailable:"non disponibile",notSliced:"non sezionato",plates:"Piatti",allPlates:"Tutti i piatti",plateNumber:"Piatto {{number}}",plateCount:"{{count}} piatto",plateCount_other:"{{count}} piatti",objectCount:"{{count}} oggetto",objectCount_other:"{{count}} oggetti",filamentCount:"{{count}} filamento",filamentCount_other:"{{count}} filamenti",eta:"ETA {{minutes}} min",noPreview:"Nessuna anteprima disponibile per questo file",pagination:{pageOf:"Pagina {{current}} di {{total}}",prev:"Prec",next:"Succ"},errors:{failedToLoad:"Caricamento file fallito",noMeshes:"Nessuna mesh trovata nel file 3MF",unsupportedFormat:"Formato file non supportato"}},maintenanceDescriptions:{lubricateCarbonRods:"Applica lubrificante alle aste in carbonio per un movimento fluido",lubricateRails:"Applica lubrificante alle guide lineari per un movimento fluido",cleanNozzle:"Pulisci hotend e ugello per prevenire intasamenti",checkBelts:"Verifica tensione cinghie per stampe accurate",cleanBuildPlate:"Pulisci il piatto per migliorare l'adesione",checkExtruder:"Ispeziona ingranaggi estrusore per usura",checkCooling:"Assicurati che le ventole di raffreddamento funzionino",generalInspection:"Ispezione generale stampante",cleanCarbonRods:"Pulisci le aste in carbonio per ridurre attrito",lubricateSteelRods:"Applica lubrificante alle aste in acciaio per un movimento fluido",cleanSteelRods:"Pulisci le aste in acciaio per ridurre attrito",cleanLinearRails:"Pulisci le guide lineari per rimuovere polvere e detriti",checkPtfeTube:"Ispeziona il tubo PTFE per usura o danni",replaceHepaFilter:"Sostituisci filtro HEPA per qualità aria",replaceCarbonFilter:"Sostituisci filtro a carbone attivo",lubricateLeftNozzleRail:"Lubrifica guida ugello sinistro (serie H2)"},smartPlugs:{offline:"Offline",admin:"Amministrazione",openPlugAdminPage:"Apri pagina amministrazione presa",deleteSmartPlug:"Elimina presa smart",turnOnSmartPlug:"Accendi presa smart",turnOffSmartPlug:"Spegni presa smart",turnOn:"Accendi",turnOff:"Spegni",addSmartPlug:{scanningNetwork:"Scansione rete...",chooseEntity:"Scegli un'entità...",connectionFailed:"Connessione fallita",searchEntities:"Cerca entità...",searchPowerSensors:"Cerca sensori di potenza...",searchEnergySensors:"Cerca sensori di energia...",placeholders:{plugName:"Presa soggiorno",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Stesso del topic potenza, o diverso"}},linkedTo:"Collegato a:",monitorOnly:"Solo monitoraggio",alerts:"Avvisi",scheduleOn:"On {{time}}",scheduleOff:"Off {{time}}",on:"On",off:"Off",power:"Potenza",kwhToday:"kWh Oggi",settings:"Impostazioni",automationSettings:"Impostazioni automazione",showInSwitchbar:"Mostra nella barra interruttori",quickAccessSidebar:"Accesso rapido dalla barra laterale",enabled:"Abilitato",enableAutomation:"Abilita automazione per questa presa",autoOn:"Auto On",autoOnDescription:"Accendi quando inizia la stampa",autoOff:"Auto Off",autoOffDescription:"Spegni quando la stampa è completata (una tantum)",autoOffPersistent:"Mantieni attivo",autoOffPersistentDescription:"Resta attivo tra le stampe invece di una tantum",turnOffDelayMode:"Modalità ritardo spegnimento",time:"Tempo",temp:"Temp",delayMinutes:"Ritardo (minuti)",tempThreshold:"Soglia temperatura (°C)",tempThresholdDescription:"Si spegne quando l'ugello si raffredda sotto questa temperatura",edit:"Modifica",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"? Questa azione non può essere annullata.',turnOnConfirm:'Sei sicuro di voler accendere "{{name}}"?',turnOffConfirm:`Sei sicuro di voler spegnere "{{name}}"? Questo interromperà l'alimentazione del dispositivo collegato.`,failedToTurn:'Impossibile {{action}} "{{name}}"',unknown:"Sconosciuto",addTitle:"Aggiungi presa smart",editTitle:"Modifica presa smart",stopScanning:"Interrompi scansione",discoverTasmota:"Scopri dispositivi Tasmota",foundDevices:"{{count}} dispositivo/i trovato/i - clicca per selezionare:",noDevicesFound:"Nessun dispositivo Tasmota trovato nella rete",haNotConfigured:"Home Assistant non è configurato. Configuralo in",haSettingsPath:"Impostazioni → Rete → Home Assistant",selectEntity:"Seleziona entità *",ipAddress:"Indirizzo IP *",nameLabel:"Nome *",username:"Nome utente",password:"Password",authHint:"Lascia vuoto se il tuo dispositivo Tasmota non richiede autenticazione",linkToPrinter:"Collega alla stampante",noPrinter:"Nessuna stampante (solo controllo manuale)",linkingDescription:"Il collegamento abilita accensione/spegnimento automatico all'inizio/fine stampa",powerAlerts:"Avvisi potenza",alertAbove:"Avviso se sopra (W)",alertBelow:"Avviso se sotto (W)",alertDescription:"Ricevi notifiche quando il consumo supera queste soglie. Lascia vuoto per disabilitare quella direzione.",dailySchedule:"Programma giornaliero",turnOnAt:"Accendi alle",turnOffAt:"Spegni alle",scheduleDescription:"Accendi/spegni automaticamente la presa a questi orari ogni giorno. Lascia vuoto per saltare quell'azione.",showOnPrinterCard:"Mostra sulla scheda stampante",displayOnPrinterCard:"Mostra pulsante sulla scheda stampante",connectedResult:"Connesso!",deviceLabel:"Dispositivo: {{name}} - ",stateLabel:"Stato: {{state}}",test:"Test",delete:"Elimina",save:"Salva",add:"Aggiungi",cancel:"Annulla",failedToStartScan:"Impossibile avviare la scansione",nameRequired:"Il nome è obbligatorio",entityRequired:"L'entità è obbligatoria per le prese Home Assistant",mqttTopicRequired:"Almeno un topic MQTT deve essere configurato per potenza, energia o monitoraggio stato",loadingEntities:"Caricamento entità...",loading:"Caricamento...",failedToLoadEntities:"Impossibile caricare le entità: {{error}}",noEntitiesMatching:'Nessuna entità trovata corrispondente a "{{search}}"',noEntitiesAvailable:"Nessuna entità disponibile",searchingEntities:"Ricerca in tutte le entità ({{count}} trovate)",showingEntities:"Mostrando switch, light, input_boolean ({{count}} disponibili)",energyMonitoringOptional:"Monitoraggio energia (Opzionale)",energyMonitoringHint:"Cerca e seleziona i sensori che forniscono dati di potenza/energia.",powerSensorW:"Sensore potenza (W)",energyTodayKwh:"Energia oggi (kWh)",totalEnergyKwh:"Energia totale (kWh)",noMatchingSensors:"Nessun sensore corrispondente",none:"Nessuno",mqttNotConfigured:"Broker MQTT non configurato. Imposta l'indirizzo del broker in",mqttSettingsPath:"Impostazioni → Rete → Pubblicazione MQTT",mqttNotConfiguredSuffix:"(non è necessario abilitare la pubblicazione, basta inserire i dettagli del broker).",mqttMonitorOnlyDescription:"Le prese MQTT ricevono dati di potenza/energia tramite sottoscrizione MQTT. Il controllo on/off non è disponibile - usa il tuo broker MQTT o sistema domotico.",powerMonitoring:"Monitoraggio potenza",energyMonitoring:"Monitoraggio energia",stateMonitoring:"Monitoraggio stato",optional:"opzionale",topic:"Topic",jsonPath:"Percorso JSON",multiplier:"Moltiplicatore",onValue:"Valore ON",mqttPowerHint:`Il percorso JSON estrae il valore dal payload JSON (es. "power_l1"). Lascia vuoto se il topic pubblica valori numerici grezzi.
 Usa moltiplicatore 0.001 per mW→W, 1000 per kW→W.`,mqttEnergyHint:`Il percorso JSON estrae il valore dal payload JSON. Lascia vuoto per valori grezzi.
 Usa moltiplicatore 0.001 per Wh→kWh, 1000 per MWh→kWh.`,mqttStateHint:`Il percorso JSON estrae il valore dal payload JSON. Lascia vuoto per valori grezzi.
-Valore ON: la stringa esatta che significa "ON". Lascia vuoto per rilevamento auto (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"URL potenza",restPowerPath:"Power JSON Path",restPowerMultiplier:"Moltiplicatore potenza",restEnergyUrl:"URL energia",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Moltiplicatore energia",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"URL separato per i dati di potenza (usa l'URL di stato se vuoto)",restEnergyUrlHint:"URL separato per i dati di energia (usa l'URL di stato se vuoto)",restEnergyHint:"Ogni valore può usare il proprio URL o ricadere sull'URL di stato. Usa i moltiplicatori per la conversione delle unità (es. 0.001 per convertire Wh in kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"Nessun interruttore nella barra",enableSwitchbarHint:'Abilita "Mostra nella barra interruttori" in Impostazioni > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"Email",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notifiche email tramite SMTP",telegram:"Notifiche tramite bot Telegram",discord:"Invia a un canale Discord tramite webhook",ntfy:"Notifiche push gratuite e self-hostabili",pushover:"Notifiche push semplici e affidabili",callmebot:"Notifiche WhatsApp gratuite tramite CallMeBot",webhook:"POST HTTP generico verso qualsiasi URL",homeassistant:"Notifiche persistenti nella dashboard di Home Assistant"},lastSuccess:"Ultimo: {{date}}",error:"Errore",printer:"Stampante:",allPrinters:"Tutte le stampanti",sendTestNotification:"Invia notifica di prova",eventSettings:"Impostazioni eventi",enabled:"Abilitato",sendFromProvider:"Invia notifiche da questo provider",printEvents:"Eventi di stampa",printerStatus:"Stato stampante",amsAlarms:"Allarmi AMS",amsHtAlarms:"Allarmi AMS-HT",printQueue:"Coda di stampa",start:"Avvio",plateCheck:"Controllo piatto",complete:"Completato",failed:"Fallito",stopped:"Interrotto",progress:"Avanzamento",offline:"Offline",lowFilament:"Filamento scarso",maintenance:"Manutenzione",amsHumidity:"Umidità AMS",amsTemp:"Temp AMS",amsHtHumidity:"Umidità AMS-HT",amsHtTemp:"Temp AMS-HT",bedCooled:"Piatto raffreddato",firstLayer:"Primo strato",quiet:"Silenzioso",digest:"Riepilogo {{time}}",printStarted:"Stampa avviata",plateNotEmpty:"Piatto non vuoto",plateNotEmptyDescription:"Oggetti rilevati prima della stampa",printCompleted:"Stampa completata",bedCooledLabel:"Piatto raffreddato",bedCooledDescription:"Piatto raffreddato sotto la soglia dopo la stampa",firstLayerCompleteLabel:"Primo strato completato",firstLayerCompleteDescription:"Notifica con foto al termine del primo strato",missingSpoolAssignmentLabel:"Assegnazione bobina mancante",missingSpoolAssignmentDescription:"Notifica quando una stampa parte e i vassoi richiesti non hanno una bobina assegnata",printFailed:"Stampa fallita",printStopped:"Stampa interrotta",progressMilestones:"Traguardi di avanzamento",progressMilestonesDescription:"Notifica al 25%, 50%, 75%",printerOffline:"Stampante offline",printerError:"Errore stampante",lowFilamentLabel:"Filamento scarso",maintenanceDue:"Manutenzione necessaria",maintenanceDueDescription:"Notifica quando è necessaria la manutenzione",amsHumidityHigh:"Umidità AMS elevata",amsHumidityHighDescription:"L'umidità dell'AMS standard supera la soglia",amsTemperatureHigh:"Temperatura AMS elevata",amsTemperatureHighDescription:"La temperatura dell'AMS standard supera la soglia",amsHtHumidityHigh:"Umidità AMS-HT elevata",amsHtHumidityHighDescription:"L'umidità dell'AMS-HT supera la soglia",amsHtTemperatureHigh:"Temperatura AMS-HT elevata",amsHtTemperatureHighDescription:"La temperatura dell'AMS-HT supera la soglia",jobAdded:"Lavoro aggiunto",jobAddedDescription:"Lavoro aggiunto alla coda",jobAssigned:"Lavoro assegnato",jobAssignedDescription:"Lavoro basato su modello assegnato alla stampante",jobStarted:"Lavoro avviato",jobStartedDescription:"Lavoro in coda avviato per la stampa",jobWaiting:"Lavoro in attesa",jobWaitingDescription:"Lavoro in attesa di filamento o stampante",jobSkipped:"Lavoro saltato",jobSkippedDescription:"Lavoro saltato (precedente fallito)",jobFailed:"Lavoro fallito",jobFailedDescription:"Avvio del lavoro fallito",queueComplete:"Coda completata",queueCompleteDescription:"Tutti i lavori in coda completati",quietHours:"Ore silenziose",noNotificationsDuring:"Nessuna notifica durante queste ore",editProviderToChangeQuietHours:"Modifica il provider per cambiare le ore silenziose",dailyDigest:"Riepilogo giornaliero",batchNotifications:"Raggruppa le notifiche in un unico riepilogo giornaliero",sendAt:"Invia alle {{time}}",editProviderToChangeDigestTime:"Modifica il provider per cambiare l'orario del riepilogo",edit:"Modifica",deleteProvider:"Elimina provider di notifica",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"? Questa azione non può essere annullata.',delete:"Elimina",addTitle:"Aggiungi provider di notifica",editTitle:"Modifica provider di notifica",nameLabel:"Nome *",namePlaceholder:"Le mie notifiche",providerTypeLabel:"Tipo di provider *",configuration:"Configurazione",testConfiguration:"Testa configurazione",printerFilter:"Filtro stampante",onlyFromPrinter:"Invia notifiche solo per eventi da questa stampante",quietHoursDnd:"Ore silenziose (Non disturbare)",quietStart:"Inizio",quietEnd:"Fine",dailyDigestLabel:"Riepilogo giornaliero",sendDigestAt:"Invia riepilogo alle",digestCollected:"Gli eventi verranno raccolti e inviati come riepilogo unico a quest'ora",notificationEvents:"Eventi di notifica",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(dopo il completamento della stampa)",eventPriority:{sectionTitle:"Priorità ntfy",helpNtfy:"Scegli una priorità per ogni evento abilitato. ntfy le usa per intensificare gli avvisi (suono, visibilità, comportamento push). I livelli non impostati qui usano l'impostazione predefinita del server ntfy.",min:"Min",low:"Bassa",default:"Predefinita",high:"Alta",urgent:"Urgente"},cancel:"Annulla",save:"Salva",add:"Aggiungi",nameRequired:"Il nome è obbligatorio",fieldRequired:"{{field}} è obbligatorio",phoneNumber:"Numero di telefono",apiKey:"Chiave API",serverUrl:"URL del server",topic:"Argomento",authToken:"Token di autenticazione",userKey:"Chiave utente",appToken:"Token applicazione",priority:"Priorità",botToken:"Token del bot",chatId:"ID chat",smtpServer:"Server SMTP",smtpPort:"Porta SMTP",security:"Sicurezza",authentication:"Autenticazione",username:"Nome utente",password:"Password",fromEmail:"Email mittente",toEmail:"Email destinatario",webhookUrl:"URL webhook",payloadFormat:"Formato payload",authorization:"Autorizzazione",titleFieldName:"Nome campo titolo",messageFieldName:"Nome campo messaggio",editTemplate:"Modifica modello: {{name}}",titleLabel:"Titolo",bodyLabel:"Corpo",titlePlaceholder:"Titolo della notifica...",bodyPlaceholder:"Corpo della notifica...",availableVariables:"Variabili disponibili",clickToInsert:"Clicca per inserire alla posizione del cursore nel corpo",livePreview:"Anteprima live",hide:"Nascondi",show:"Mostra",loadingPreview:"Caricamento anteprima...",enterTemplateContent:"Inserisci il contenuto del modello per vedere l'anteprima",titlePreview:"Titolo:",bodyPreview:"Corpo:",resetToDefault:"Ripristina predefinito",titleRequired:"Il titolo è obbligatorio",bodyRequired:"Il corpo è obbligatorio",notificationLog:"Registro notifiche",showFailedOnly:"Solo fallite",last24Hours:"Ultime 24 ore",last7Days:"Ultimi 7 giorni",last30Days:"Ultimi 30 giorni",last90Days:"Ultimi 90 giorni",justNow:"Proprio ora",noFailedNotifications:"Nessuna notifica fallita",noNotificationsLogged:"Nessuna notifica registrata",unknownProvider:"Provider sconosciuto",logTitle:"Titolo",logMessage:"Messaggio",logError:"Errore",logProvider:"Provider: {{type}}",logTime:"Ora: {{time}}",refresh:"Aggiorna",clearOld:"Cancella vecchie",statsSummary:"Ultimi {{days}} giorni:",statsNotifications:"notifiche",statsSent:"{{count}} inviate",statsFailed:"{{count}} fallite",eventTypes:{print_start:"Stampa avviata",print_complete:"Stampa completata",print_failed:"Stampa fallita",print_stopped:"Stampa interrotta",print_progress:"Avanzamento",printer_offline:"Stampante offline",printer_error:"Errore stampante",filament_low:"Filamento scarso",maintenance_due:"Manutenzione necessaria",test:"Prova"},userEmail:{title:"Notifiche",emailNotifications:"Notifiche via e-mail",emailNotificationsDesc:"Ricevi notifiche via e-mail per i tuoi lavori di stampa. Le e-mail vengono inviate tramite le impostazioni SMTP configurate nell'autenticazione avanzata.",sendingTo:"Le notifiche verranno inviate a",noEmailWarning:"Il tuo account non ha un indirizzo e-mail. Contatta un amministratore per aggiungerne uno.",printJobNotifications:"Notifiche lavori di stampa",printJobNotificationsDesc:"Scegli quali eventi attivano le notifiche e-mail per i lavori di stampa che invii.",printJobStarts:"Inizio lavoro di stampa",printJobStartsDesc:"Ricevi una notifica quando il tuo lavoro di stampa inizia.",printJobFinishes:"Fine lavoro di stampa",printJobFinishesDesc:"Ricevi una notifica quando il tuo lavoro di stampa si completa correttamente.",printErrors:"Errori di stampa",printErrorsDesc:"Ricevi una notifica quando il tuo lavoro di stampa fallisce o incontra un errore.",printJobStops:"Lavoro di stampa interrotto",printJobStopsDesc:"Ricevi una notifica quando il tuo lavoro di stampa viene annullato o interrotto.",saveSuccess:"Preferenze di notifica salvate.",saveError:"Impossibile salvare le preferenze di notifica."}},richTextEditor:{bold:"Grassetto",italic:"Corsivo",underline:"Sottolineato",bulletList:"Elenco puntato",numberedList:"Elenco numerato",alignLeft:"Allinea a sinistra",alignCenter:"Allinea al centro",alignRight:"Allinea a destra",addLink:"Aggiungi link",removeLink:"Rimuovi link"},externalLinks:{noLinksConfigured:"Nessun link esterno configurato",deleteLink:"Elimina link",removeCustomIcon:"Rimuovi icona personalizzata",openInNewTab:"Apri in nuova scheda",placeholders:{linkName:"Il mio link"}},keyboardShortcuts:{title:"Scorciatoie da tastiera",navigation:"Navigazione",archivesSection:"Archivi",kProfilesSection:"Profili K",generalSection:"Generale",shortcuts:{goToPrinters:"Vai a Stampanti",goToArchives:"Vai ad Archivi",goToQueue:"Vai a Coda",goToStats:"Vai a Statistiche",goToProfiles:"Vai a Profili cloud",goToSettings:"Vai a Impostazioni",focusSearch:"Vai alla ricerca",openUploadModal:"Apri finestra di caricamento",clearSelection:"Cancella selezione / deseleziona input",contextMenu:"Menu contestuale sulle schede",refreshProfiles:"Aggiorna profili",newProfile:"Nuovo profilo",exitSelectionMode:"Esci dalla modalità selezione",showHelp:"Mostra questa guida"},footer:"Premi Esc o clicca fuori per chiudere"},notificationLog:{title:"Registro notifiche",events:{printStarted:"Stampa avviata",printComplete:"Stampa completata",printFailed:"Stampa fallita",printStopped:"Stampa interrotta",progress:"Avanzamento",printerOffline:"Stampante offline",printerError:"Errore stampante",lowFilament:"Filamento in esaurimento",maintenanceDue:"Manutenzione in scadenza",test:"Test"},timeAgo:{justNow:"Adesso",minutesAgo:"{{minutes}} min fa",hoursAgo:"{{hours}} ore fa"}},restoreBackup:{title:"Ripristina backup",restoring:"Ripristino...",restoreComplete:"Ripristino completato",restoreFailed:"Ripristino fallito",importSettings:"Importa impostazioni da un file di backup",pleaseWait:"Attendere il ripristino dei dati",clickToSelect:"Clicca per selezionare il file di backup (.json o .zip)",howDuplicateHandling:"Come funziona la gestione dei duplicati:",categories:{printers:"Stampanti",smartPlugs:"Prese smart",notificationProviders:"Provider di notifica",filaments:"Filamenti",archives:"Archivi",pendingUploads:"Caricamenti in sospeso",settingsTemplates:"Impostazioni e modelli"},matchingInfo:{printers:"abbinati per numero di serie",smartPlugs:"abbinati per indirizzo IP",notificationProviders:"abbinati per nome",filaments:"abbinati per nome + tipo + marca",archives:"abbinati per hash del contenuto",pendingUploads:"abbinati per nome file",settingsTemplates:"sempre sovrascritti"},replaceExisting:"Sostituisci dati esistenti",keepExisting:"Mantieni dati esistenti",replaceDescription:"Sovrascrivi gli elementi già esistenti con i dati del backup",keepDescription:"Ripristina solo gli elementi che non esistono già",caution:"Attenzione:",cautionText:"La sovrascrittura sostituirà le configurazioni attuali con i dati del backup. I codici di accesso delle stampanti non vengono mai sovrascritti per sicurezza.",itemsRestored:"Elementi ripristinati",itemsSkipped:"Elementi saltati",restored:"Ripristinati",skipped:"Saltati (già esistenti)",filesLabel:"File (3MF, miniature, ecc.)",newApiKeysGenerated:"Nuove chiavi API generate",newApiKeysWarning:"Queste chiavi vengono mostrate una sola volta. Copiale adesso!",processingBackup:"Elaborazione file di backup...",noDataFound:"Nessun dato trovato da ripristinare nel file di backup.",failedToRestore:"Impossibile ripristinare il backup. Verificare il formato del file."},backupExport:{title:"Esporta backup",selectData:"Seleziona i dati da includere",selectAll:"Seleziona tutto",selectNone:"Deseleziona tutto",categoryDescriptions:{settings:"Lingua, tema, preferenze di aggiornamento",notifications:"ntfy, Pushover, Discord, ecc.",templates:"Modelli di messaggi personalizzati",smartPlugs:"Configurazioni prese Tasmota",externalLinks:"Link della barra laterale a servizi esterni",printers:"Info stampanti (codici di accesso esclusi)",plateDetection:"Immagini di riferimento piatto vuoto",filaments:"Tipi di filamento e costi",maintenance:"Programmi di manutenzione personalizzati",archives:"Tutti i dati di stampa + file (3MF, miniature, foto)",projects:"Progetti, elementi BOM e allegati",pendingUploads:"Caricamenti della stampante virtuale in attesa di revisione",apiKeys:"Chiavi API webhook (nuove chiavi generate all'importazione)"},requiresPrinters:"Richiede la selezione di Stampanti",zipFileWarning:"Verrà creato un file ZIP.",zipFileDescription:"Include tutti i file 3MF, miniature, timelapse e foto. Potrebbe richiedere tempo e produrre un file di grandi dimensioni.",includeAccessCodes:"Includi codici di accesso",includeAccessCodesDescription:"Per il trasferimento su un'altra macchina",includeAccessCodesWarning:"I codici di accesso saranno inclusi in testo semplice. Mantieni sicuro questo file di backup!",categoriesSelected:"{{selectedCount}} categorie selezionate"},pendingUploads:{placeholders:{notes:"Aggiungi note su questa stampa..."},discardUpload:"Scarta caricamento",archiveAllUploads:"Archivia tutti i caricamenti",discardAllUploads:"Scarta tutti i caricamenti",archive:"Archivia",timeAgo:{justNow:"Adesso",minutesAgo:"{{minutes}} min fa",hoursAgo:"{{hours}} ore fa",daysAgo:"{{days}} giorni fa"}},apiBrowser:{placeholders:{requestBody:"Corpo della richiesta JSON...",searchEndpoints:"Cerca endpoint..."}},configureAmsSlot:{title:"Configura Slot AMS",slotConfigured:"Slot configurato!",configuringSlot:"Configurazione slot:",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Cerca preset...",colorPlaceholder:"Nome colore o hex (es. marrone, FF8800)",clearCustomColor:"Cancella colore personalizzato",noCloudPresets:"Nessun preset cloud. Accedi a Bambu Cloud per sincronizzare.",noPresetsAvailable:"Nessun preset disponibile. Accedi a Bambu Cloud o importa profili locali.",noMatchingPresets:"Nessun preset corrispondente trovato.",custom:"Personalizzato",builtin:"Integrato",settingsSentToPrinter:"Impostazioni inviate alla stampante",filamentProfile:"Profilo filamento",kProfileLabel:"Profilo K (Pressure Advance)",filteringFor:"Filtrando per: {{material}}",noKProfile:"Nessun profilo K (usa predefinito 0.020)",noMatchingKProfiles:"Nessun profilo K corrispondente. Verrà usato K=0.020 predefinito.",selectFilamentFirst:"Seleziona prima un profilo filamento",kFromCalibration:"K={{value}} dalla calibrazione stampante",customColorLabel:"Colore personalizzato (opzionale)",presetColors:"Colori {{name}}:",showLessColors:"Mostra meno colori",showMoreColors:"Mostra più colori",clear:"Cancella",hexLabel:"Hex: #{{hex}}",resetting:"Ripristino...",resetSlot:"Ripristina slot",cancel:"Annulla",configuring:"Configurazione...",configureSlot:"Configura slot"},githubBackup:{title:"Backup GitHub",history:"Cronologia",downloadBackup:"Scarica backup",restoreBackup:"Ripristina backup",noBackupsYet:"Nessun backup ancora"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Cerca tag...",renameTag:"Rinomina tag",deleteTag:"Elimina tag"},notificationTemplates:{placeholders:{title:"Titolo notifica...",body:"Corpo notifica..."}},batchTag:{placeholders:{newTag:"Inserisci nuovo tag..."}},photoGallery:{deletePhoto:"Elimina foto"},filamentHoverCard:{copySpoolUuid:"Copia UUID bobina"},kProfilesView:{hasNote:"Ha una nota",copyProfile:"Copia profilo"},layout:{openMenu:"Apri menu",noPermissionSystemInfo:"Non hai il permesso di visualizzare le informazioni di sistema"},dashboard:{dragToReorder:"Trascina per riordinare",hideWidget:"Nascondi widget"},notificationProviderCard:{deleteNotificationProvider:"Elimina provider di notifica"},fileManagerModal:{closeFileManager:"Chiudi gestore file",sortFiles:"Ordina file",goToParentFolder:"Vai alla cartella superiore",threeView:"Vista 3D"},embeddedCameraViewer:{refreshStream:"Aggiorna stream",close:"Chiudi",zoomOut:"Rimpicciolisci",resetZoom:"Reimposta zoom",zoomIn:"Ingrandisci",dragToResize:"Trascina per ridimensionare"},timelapseViewer:{skipBack5s:"Indietro 5s",skipForward5s:"Avanti 5s"},notificationProviders:{descriptions:{email:"Notifiche email via SMTP",telegram:"Notifiche tramite bot Telegram",discord:"Invia a canale Discord tramite webhook",ntfy:"Notifiche push gratuite e self-hostabili",pushover:"Notifiche push semplici e affidabili",callmebot:"Notifiche WhatsApp gratuite tramite CallMeBot",webhook:"POST HTTP generico a qualsiasi URL"}},logViewer:{searchPlaceholder:"Cerca messaggio o nome logger...",noLogEntries:"Nessuna voce di log trovata"},switchbarPopover:{noSwitchesInSwitchbar:"Nessun interruttore nella barra"},projectPageModal:{placeholders:{title:"Titolo",designer:"Designer",license:"Licenza",description:"Inserisci descrizione...",profileTitle:"Titolo profilo",profileDescription:"Descrizione profilo..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"In attesa",justNow:"Proprio ora",now:"Ora",minsAgo:"{{count}}m fa",inMins:"tra {{count}}m",hoursAgo:"{{count}}h fa",inHours:"tra {{count}}h",daysAgo:"{{count}}g fa",inDays:"tra {{count}}g"},spoolbuddy:{nav:{dashboard:"Dashboard",ams:"AMS",inventory:"Inventario",writeTag:"Scrivi",settings:"Impostazioni"},status:{nfcReady:"NFC pronto",nfcOff:"NFC spento",offline:"Offline",online:"Online",noPrinters:"Nessuna stampante",deviceOffline:"Dispositivo offline",waitingConnection:"In attesa della connessione...",systemReady:"Sistema pronto",status:"Stato"},dashboard:{readyToScan:"Pronto per la scansione",idleMessage:"Posiziona una bobina sulla bilancia per identificarla",nfcHint:"Il tag NFC verrà letto automaticamente",device:"Dispositivo",syncWeight:"Sincronizza peso",weightSynced:"Sincronizzato!",unknownTag:"Tag sconosciuto",newTag:"Nuovo tag rilevato",onScale:"sulla bilancia",linkSpool:"Collega a bobina",linkTagTitle:"Collega tag a bobina",linkTag:"Collega tag",selectSpool:"Seleziona una bobina da collegare a questo tag:",noUntagged:"Nessuna bobina senza tag trovata",tagDetected:"Tag rilevato",noTag:"Nessun tag",tagId:"Tag",grossWeight:"Peso lordo",spoolSize:"Dimensione bobina",close:"Chiudi",currentSpool:"Bobina attuale",plateReady:"Piatto pronto: {{name}}",plateReadyLabel:"Piatti da liberare",plateClearAction:"Libera",plateClearedToast:"Piatto contrassegnato come liberato",plateClearFailed:"Impossibile contrassegnare il piatto come liberato"},modal:{spoolDetected:"Bobina rilevata",assignToAms:"Assegna all'AMS",syncWeight:"Sincronizza peso",weightSynced:"Sincronizzato!",syncing:"Sincronizzazione...",newTagDetected:"Nuovo tag rilevato",addToInventory:"Aggiungi all'inventario",assignToAmsTitle:"Assegna all'AMS",selectSlot:"Seleziona uno slot",assign:"Assegna",assigning:"Assegnazione...",assignSuccess:"Assegnato!",assignError:"Impossibile assegnare la bobina. Riprovare.",noPrinterSelected:"Seleziona una stampante...",noAmsDetected:"Nessun AMS rilevato su questa stampante",slot:"Slot"},weight:{noReading:"Nessuna lettura",stable:"Stabile",measuring:"Misurazione...",tare:"Tara",calibrate:"Calibra"},spool:{remaining:"Rimanente",material:"Materiale",brand:"Marca",color:"Colore",coreWeight:"Nucleo",labelWeight:"Etichetta",scaleWeight:"Bilancia",netWeight:"Netto",lastUsed:"Ultimo utilizzo"},ams:{noData:"Nessun AMS rilevato",connectAms:"Collega un AMS per vedere gli slot",noPrinter:"Nessuna stampante selezionata",selectPrinter:"Seleziona una stampante dalla barra superiore",printerDisconnected:"Stampante disconnessa",humidity:"Umidità",level:"Livello",active:"Attivo",slot:"Slot",empty:"Vuoto"},inventory:{search:"Cerca bobine...",empty:"Nessuna bobina nell'inventario",noResults:"Nessuna bobina corrispondente",spools:"bobine",addSpool:"Aggiungi bobina"},settings:{tabDevice:"Dispositivo",tabDisplay:"Display",tabScale:"Bilancia",tabUpdates:"Aggiornamenti",nfcReader:"Lettore NFC",type:"Tipo",connection:"Connessione",notConnected:"N/A",deviceInfo:"Info dispositivo",hostname:"Host",uptime:"Tempo di attività",brightness:"Luminosità",saved:"Salvato",noBacklight:"Nessuna retroilluminazione DSI rilevata. Il controllo luminosità richiede un display DSI.",screenBlank:"Timeout spegnimento schermo",screenBlankDesc:"Lo schermo si spegne dopo inattività. Tocca per riattivare.",displayNote:"La luminosità viene applicata come filtro software.",scaleCalibration:"Calibrazione bilancia",currentWeight:"Peso attuale",tareOffset:"Tara",calFactor:"Fattore",knownWeight:"Peso noto",calStep1:"Rimuovere tutto dalla bilancia e premere Imposta zero.",calStep2:"Posizionare il peso noto sulla bilancia.",setZero:"Imposta zero",calibrateNow:"Calibra",calibrated:"Calibrato",tareSet:"Comando tara inviato. In attesa del dispositivo...",tareFailed:"Invio comando tara fallito",zeroSet:"Punto zero impostato. Posizionare il peso noto sulla bilancia.",calibrationDone:"Calibrazione completata!",calibrationFailed:"Calibrazione fallita",lastCalibrated:"Ultima calibrazione",stable:"Stabile",settling:"Stabilizzazione...",firmware:"Firmware",scale:"Bilancia",noDevice:"Nessun dispositivo SpoolBuddy trovato",daemonVersion:"Versione daemon",currentVersion:"Attuale",versionPending:"In attesa del daemon...",checking:"Verifica...",checkUpdates:"Verifica aggiornamenti",updateAvailable:"Aggiornamento disponibile",updateInstructions:"Aggiorna via SSH: esegui lo script di installazione SpoolBuddy.",upToDate:"Aggiornato",includeBeta:"Includi versioni beta",systemConfig:"Backend & autenticazione",backendUrl:"URL backend Bambuddy",apiToken:"Token API",apiTokenPlaceholder:"Inserisci token API",saveConfig:"Salva configurazione",systemQueued:"Configurazione in coda.",systemFieldsRequired:"L'URL del backend è obbligatorio.",nfcDiagnostic:"Diagnostica NFC",scaleDiagnostic:"Diagnostica bilancia",readTagDiagnostic:"Diagnostica lettura tag",testNfc:"Test lettore",testScale:"Test precisione",testReadTag:"Leggi tag"},writeTag:{tabExisting:"Bobina esistente",tabNew:"Nuova bobina",tabReplace:"Sostituisci tag",searchPlaceholder:"Cerca per materiale, colore, marca...",noUntaggedSpools:"Nessuna bobina senza tag",noTaggedSpools:"Nessuna bobina con tag",selectSpool:"Seleziona una bobina, poi posiziona un NTAG sul lettore",placeTag:"Posiziona un NTAG sul lettore",tagReady:"Tag rilevato — pronto per la scrittura",writeTag:"Scrivi tag",replaceTag:"Sostituisci tag",writing:"Scrittura tag...",waiting:"In attesa di SpoolBuddy...",writeSuccess:"Tag scritto con successo!",writeFailed:"Scrittura fallita",queueFailed:"Impossibile accodare il comando di scrittura",tryAgain:"Riprova",cancel:"Annulla",replaceWarning:"Il vecchio tag verrà scollegato. Il nuovo tag lo sostituirà.",deviceOffline:"SpoolBuddy è offline",material:"Materiale",colorName:"Nome colore",color:"Colore",brand:"Marca",weight:"Peso (g)",createSpool:"Crea bobina",creating:"Creazione...",spoolCreated:"Bobina creata! Pronto per la scrittura.",createFailed:"Impossibile creare la bobina"},quickMenu:{printerPower:"Alimentazione stampante",systemControls:"Sistema",restartDaemon:"Riavvia daemon",restartBrowser:"Riavvia browser",reboot:"Riavvia",shutdown:"Spegni",swipeToClose:"Scorri verso il basso per chiudere",confirmTitle:"Conferma",confirmShutdown:"Sei sicuro di voler spegnere lo SpoolBuddy? Avrai bisogno di accesso fisico per riaccenderlo.",confirmReboot:"Sei sicuro di voler riavviare lo SpoolBuddy?",confirmRestartDaemon:"Riavviare il daemon SpoolBuddy? NFC e bilancia saranno temporaneamente non disponibili.",confirmRestartBrowser:"Riavviare il browser kiosk? Lo schermo diventerà brevemente nero.",confirm:"Conferma",confirmPlugOn:"Accendere {{name}}?",confirmPlugOff:"Spegnere {{name}}?",turnOn:"Accendi",turnOff:"Spegni"}},bugReport:{title:"Segnala un bug",description:"Descrizione",descriptionPlaceholder:"Cosa è andato storto? Descrivi il problema...",email:"Email (opzionale)",emailPlaceholder:"tua@email.it",emailPrivacy:"Se fornita, la tua email sarà inclusa in una sezione compressa dell'issue GitHub per permettere al manutentore di contattarti.",screenshot:"Screenshot",uploadOrPaste:"Carica, incolla o trascina un'immagine",dataCollectedSummary:"Quali dati sono inclusi nel report?",dataIncluded:"Inclusi:",dataIncludedList:"Versione app, OS, architettura, versione Python, statistiche database (solo conteggi), modelli stampante, numero ugelli, versioni firmware, stato connessione, stato integrazioni (Spoolman, MQTT, HA), impostazioni non sensibili, conteggio interfacce di rete, dettagli Docker, versioni dipendenze.",dataNeverIncluded:"Mai inclusi:",dataNeverIncludedList:"Nomi stampanti, numeri di serie, codici di accesso, password, indirizzi IP, indirizzi email, chiavi API, token, URL webhook, nomi host o nomi utente.",submit:"Invia",startLogging:"Avvia registrazione debug",stepEnableLogging:"Registrazione debug attivata",stepReproduce:"Riproduci il problema ora",stepStopLogging:"Ferma & invia rapporto",stopAndSubmit:"Ferma & Invia",maxDuration:"Arresto automatico dopo {{minutes}} min",stoppingLogs:"Raccolta log & invio...",submitting:"Invio segnalazione bug...",submitSuccess:"Segnalazione bug inviata con successo!",submitFailed:"Impossibile inviare la segnalazione bug",thankYou:"Grazie!",submitted:"La tua segnalazione bug è stata inviata.",viewIssue:"Vedi issue",unexpectedError:"Si è verificato un errore imprevisto"},failureDetection:{title:"Rilevamento guasti con IA",description:"Monitora le stampe tramite un'API ML Obico auto-ospitata e agisce automaticamente sui guasti rilevati.",mlUrl:"URL API ML Obico",mlUrlHint:"URL base del tuo container Obico ml_api auto-ospitato (es. http://192.168.1.10:3333).",test:"Prova",testSuccess:"API ML raggiungibile e funzionante.",testFailed:"Impossibile raggiungere l'API ML.",sensitivity:"Sensibilità",sensitivityLow:"Bassa (meno falsi positivi)",sensitivityMedium:"Media (bilanciata)",sensitivityHigh:"Alta (rilevamento precoce, più falsi positivi)",sensitivityHint:"Regola le soglie di confidenza che attivano avvisi e guasti.",action:"Azione al guasto rilevato",actionNotify:"Solo notifica",actionPause:"Metti in pausa",actionPauseOff:"Pausa e stacca corrente",pollInterval:"Intervallo di controllo (secondi)",pollIntervalHint:"Frequenza di controllo di ogni stampante durante la stampa. Minimo 5s, massimo 120s.",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"Stampanti monitorate",perPrinterHint:"Scegli quali stampanti il servizio di rilevamento deve monitorare.",monitorAll:"Monitora tutte le stampanti connesse",statusTitle:"Stato",serviceRunning:"Servizio in esecuzione",thresholds:"Soglie bassa / alta",activePrinters:"Stampe attive",noActivePrints:"Nessuna stampa in corso.",historyTitle:"Rilevamenti recenti",noHistory:"Nessun rilevamento finora."},makerworld:{title:"MakerWorld",description:"Incolla un URL di un modello MakerWorld per importarlo e stamparlo direttamente da Bambuddy — senza passare dall'app Bambu Handy.",pasteUrlHeader:"Importa da MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… o incolla qualsiasi link MakerWorld",resolveButton:"Risolvi",signInRequiredTitle:"Accesso Bambu Cloud richiesto per scaricare",signInRequiredBody:"Puoi consultare i dettagli del modello in modo anonimo, ma MakerWorld richiede un account Bambu Cloud per scaricare i file 3MF.",openCloudSettings:"Apri impostazioni Cloud",untitledModel:"Modello senza titolo",byCreator:"di {{name}}",downloadsCount:"{{count}} download",licensePrefix:"Licenza",alreadyImported:"Già nella libreria",openOnMakerworld:"Apri su MakerWorld",alreadyInLibrary:"Questo modello è già nella tua libreria — lo trovi in Gestione file → MakerWorld",importSuccess:"{{filename}} importato — salvato in Gestione file → MakerWorld",platesHeader:"Piatti ({{count}})",plateDefaultName:"Piatto {{n}}",materialCount:"{{count}} filamenti",amsRequired:"AMS richiesto",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"Salva",sliceIn:"Salva e affetta in {{slicer}}",disclaimer:"L'integrazione MakerWorld utilizza endpoint API documentati dalla community. Bambuddy non è affiliato né approvato da MakerWorld o Bambu Lab.",lastImportSuccess:"Importato nella tua libreria",lastImportAlreadyInLibrary:"Già nella tua libreria",viewInLibrary:"Visualizza in Gestione file",openInBambuStudio:"Apri in Bambu Studio",openInOrcaSlicer:"Apri in OrcaSlicer",importTo:"Importa in Gestione file",recentImportsHeader:"Importazioni recenti",phaseResolving:"Risoluzione",phaseDownloading:"Download",folderAuto:"MakerWorld (predefinita)",importAll:"Importa tutto",importAllProgress:"Importazione {{current}}/{{total}}",openGallery:"Apri galleria immagini",galleryPrev:"Immagine precedente",galleryNext:"Immagine successiva",deleteImport:"Rimuovi dalla libreria",importDeleting:"Rimozione…",importDeleted:"Rimosso dalla libreria",confirmDelete:"Rimuovere {{filename}} dalla libreria? Il file locale verrà eliminato, ma il piatto può essere re-importato da MakerWorld.",errors:{resolveFailed:"Impossibile risolvere questo URL MakerWorld.",downloadFailed:"Download non riuscito. Riprova.",deleteFailed:"Impossibile rimuovere il file dalla libreria."}},libraryTrash:{title:"Cestino",headerButton:"Cestino",headerTooltip:"Visualizza i file spostati nel cestino",backToFiles:"Torna al gestore file",subtitleAdmin:"I file eliminati restano qui per {{days}} giorni, poi vengono rimossi automaticamente. Questa vista mostra il cestino di tutti gli utenti.",subtitleUser:"I file eliminati restano qui per {{days}} giorni, poi vengono rimossi automaticamente.",loading:"Caricamento del cestino…",loadError:"Impossibile caricare il cestino.",empty:"Il cestino è vuoto.",summary:"{{count}} file · {{size}}",emptyTrash:"Svuota cestino",restore:"Ripristina",purgeNow:"Elimina ora",autoPurgeIn:"Eliminazione automatica tra {{when}}",days:"giorni",retentionLabel:"Elimina automaticamente dopo",selectAll:"Seleziona tutto",selectOne:"Seleziona {{filename}}",selectionCount:"{{count}} selezionati",bulkRestore:"Ripristina selezionati",bulkPurge:"Elimina selezionati",col:{filename:"File",folder:"Cartella",size:"Dimensione",deleted:"Spostato nel cestino",autoPurge:"Eliminazione auto.",owner:"Proprietario",actions:"Azioni"},confirm:{purgeTitle:"Eliminare definitivamente?",purgeBody:"{{filename}} verrà eliminato dal disco e non potrà essere ripristinato.",emptyTitle:"Svuotare il cestino?",emptyBody:"Tutti i {{count}} file verranno eliminati dal disco. Azione non annullabile.",bulkPurgeTitle:"Eliminare definitivamente i file selezionati?",bulkPurgeBody:"I {{count}} file selezionati verranno eliminati dal disco e non potranno essere ripristinati.",cta:"Elimina definitivamente"},toast:{restored:"File ripristinato.",restoreFailed:"Impossibile ripristinare il file.",purged:"File eliminato definitivamente.",purgeFailed:"Impossibile eliminare il file.",emptied:"{{count}} file eliminati dal cestino.",emptyFailed:"Impossibile svuotare il cestino.",retentionSaved:"Eliminazione automatica impostata su {{days}} giorni.",retentionFailed:"Impossibile salvare l'impostazione di conservazione.",bulkRestored:"{{count}} file ripristinati.",bulkPurged:"{{count}} file eliminati."}},libraryPurge:{title:"Elimina file vecchi",headerButton:"Elimina vecchi",headerTooltip:"Sposta in blocco i file vecchi nel cestino",description:"I file più vecchi della soglia verranno spostati nel cestino. Le cartelle esterne vengono ignorate. Puoi ripristinarli dal cestino prima dell'eliminazione automatica.",ageLabel:"Sposta i file più vecchi di",days:"giorni",includeNeverPrinted:"Includi i file mai stampati",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"Verifica quanti file corrispondono…",previewFailed:"Impossibile mostrare l'anteprima.",previewSummary:"{{count}} file · {{size}} verrebbero spostati nel cestino",andMore:"…e altri {{count}}",warning:"I file vengono eliminati in modo soft — puoi ripristinarli dal cestino fino alla scadenza del periodo di conservazione.",confirmCta:"Sposta {{count}} nel cestino",purging:"Spostamento nel cestino…",toast:{success:"{{count}} file spostati nel cestino.",failed:"Impossibile eliminare i file."}},libraryAutoPurge:{enableLabel:"Elimina automaticamente i file vecchi",enableDescription:"Esegue l'eliminazione amministrativa una volta al giorno. I file finiscono prima nel cestino — non vengono eliminati immediatamente.",ageLabel:"Elimina automaticamente i file più vecchi di",ageDescription:"Minimo 7 giorni, massimo 10 anni. Usa la stessa regola di età del pulsante Elimina manuale.",days:"giorni",includeNeverPrinted:"Includi i file mai stampati",saveFailed:"Impossibile salvare le impostazioni di eliminazione automatica."},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},kme={nav:{printers:"Impressoras",archives:"Arquivos",queue:"Fila",stats:"Estatísticas",profiles:"Perfis",maintenance:"Manutenção",projects:"Projetos",inventory:"Inventário",files:"Gerenciador de Arquivos",makerworld:"MakerWorld",notifications:"Notificações",settings:"Configurações",system:"Sistema",collapseSidebar:"Recolher barra lateral",expandSidebar:"Expandir barra lateral",update:"Atualizar",updateAvailable:"Atualização disponível: v{{version}}",updateAvailableBanner:"Versão {{version}} está disponível!",viewUpdate:"Ver atualização",viewOnGithub:"Ver no GitHub",keyboardShortcuts:"Atalhos de teclado (?)",switchToLight:"Mudar para modo claro",switchToDark:"Mudar para modo escuro",smartSwitches:"Interruptores inteligentes",logout:"Sair"},common:{save:"Salvar",saving:"Salvando...",cancel:"Cancelar",delete:"Excluir",edit:"Editar",add:"Adicionar",close:"Fechar",confirm:"Confirmar",loading:"Carregando...",error:"Erro",success:"Sucesso",warning:"Aviso",enabled:"Ativado",disabled:"Desativado",yes:"Sim",no:"Não",on:"Ligado",off:"Desligado",all:"Todos",none:"Nenhum",search:"Pesquisar",filter:"Filtrar",sort:"Ordenar",refresh:"Atualizar",download:"Baixar",upload:"Enviar",uploading:"Enviando...",uploadFailed:"Falha no envio",actions:"Ações",status:"Status",name:"Nome",description:"Descrição",date:"Data",time:"Hora",hours:"Horas",minutes:"Minutos",seconds:"Segundos",days:"Dias",enable:"Ativar",disable:"Desativar",permissions:"Permissões",noPrinters:"Nenhuma impressora configurada",noData:"Nenhum dado disponível",linkNotFound:"Link não encontrado",required:"Obrigatório",optional:"Opcional",dismiss:"Dispensar",apply:"Aplicar",reset:"Redefinir",export:"Exportar",import:"Importar",clear:"Limpar",selectAll:"Selecionar tudo",deselectAll:"Desmarcar tudo",noChange:"— Sem alterações —",unchanged:"Inalterado",unassigned:"Não atribuído",unknown:"Desconhecido",unknownError:"Erro desconhecido",today:"Hoje",tomorrow:"Amanhã",asap:"O mais rápido possível",overdue:"Atrasado",now:"Agora",collapse:"Recolher",expand:"Expandir",viewArchive:"Ver arquivo",viewInFileManager:"Ver no Gerenciador de Arquivos",addedBy:"Adicionado por {{username}}",prints:"impressões",more:"+{{count}} mais",ascending:"Crescente",descending:"Decrescente",back:"Voltar",copy:"Copiar",copied:"Copiado!",printer:"Impressora",remove:"Remover",type:"Tipo",print:"Imprimir",rename:"Renomear",move:"Mover",create:"Criar",duplicate:"Duplicar",left:"Esquerda",right:"Direita"},printers:{title:"Impressoras",addPrinter:"Adicionar Impressora",editPrinter:"Editar Impressora",deletePrinter:"Excluir Impressora",printerName:"Nome da Impressora",serialNumber:"Número de Série",ipAddress:"Endereço IP / Nome do Host",accessCode:"Código de Acesso",model:"Modelo",nozzleCount:"Número de Bicos",autoArchive:"Arquivamento Automático",status:{available:"Disponível",idle:"Ocioso",printing:"Imprimindo",paused:"Pausado",offline:"Offline",problem:"Problema",error:"Erro",finished:"Concluído",unknown:"Desconhecido"},temperatures:{nozzle:"Bico",bed:"Cama",chamber:"Câmara"},progress:"{{percent}}% concluído",timeRemaining:"{{time}} restante",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',maintenanceOk:"Manutenção OK",maintenanceWarning:"{{count}} aviso",maintenanceWarning_plural:"{{count}} avisos",maintenanceDue:"{{count}} devido",maintenanceDue_plural:"{{count}} devido",sort:{name:"Nome",status:"Status",model:"Modelo",location:"Localização",ascending:"Ordem crescente",descending:"Ordem decrescente"},cardSize:{small:"Cartões pequenos",medium:"Cartões médios",large:"Cartões grandes",extraLarge:"Cartões extra grandes"},hideOffline:"Ocultar offline",nextAvailable:"Próximo disponível",powerOn:"Ligar",offlinePrintersWithPlugs:"Impressoras offline com tomadas inteligentes",noPrintersConfigured:"Nenhuma impressora configurada ainda",search:"Pesquisar impressoras...",noSearchResults:"Nenhuma impressora corresponde à sua pesquisa ou filtros",filter:{allStatuses:"Todos os status",allLocations:"Todos os locais"},readyToPrint:"Pronto para imprimir",external:"Externo",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Excluir arquivos de impressão",noLabel:"Sem etiqueta",printPreview:"Pré-visualização de impressão",width:"Largura",height:"Altura",noObjectsFound:"Nenhum objeto encontrado",objectsLoadedOnPrintStart:"Objetos são carregados quando uma impressão começa",willBeSkipped:"Será ignorado",name:"Nome",serialCannotBeChanged:"Número de série não pode ser alterado",locationHelp:"Usado para agrupar impressoras e filtrar trabalhos na fila",wifiSignal:{veryWeak:"Muito fraco",weak:"Fraco",fair:"Regular",good:"Bom",excellent:"Excelente"},maintenanceUpToDate:"Toda a manutenção está em dia - Clique para ver",chamberLightOn:"Ligar luz da câmara",chamberLightOff:"Desligar luz da câmara",files:"Arquivos",browseFiles:"Procurar arquivos da impressora",autoOffAfterPrint:"Desligamento automático após impressão",autoOffExecuted:"Desligamento automático executado - ligue a impressora para reiniciar",hmsErrors:"Erros HMS",viewHmsErrors:"Ver {{count}} erro(s) HMS",resume:"Retomar",pause:"Pausar",stop:"Parar",camera:"âmera",skipObject:"Ignorar objeto",reconnect:"Reconectar",forceRefresh:"Forçar atualização",forceRefreshSuccess:"Atualização solicitada",mqttDebug:"Depuração MQTT",printerInformation:"Informações da impressora",copyToClipboard:"Copiar",copied:"Copiado!",state:"Estado",wifiSignalLabel:"Sinal WiFi",developerMode:"Modo desenvolvedor",enabled:"Ativado",disabled:"Desativado",addedOn:"Adicionada em",sdCard:"Cartão SD",inserted:"Inserido",notInserted:"Não inserido",totalPrintHours:"Horas de impressão",activeNozzle:"Ativo: {{nozzle}} bico",nozzleRack:"Suporte de bicos",nozzleDocked:"Acoplado",nozzleMounted:"Montado",nozzleActive:"Ativo",nozzleIdle:"Ocioso",nozzleDiameter:"Diâmetro",nozzleType:"Tipo",nozzleStatus:"Status",nozzleFilament:"Filamento",nozzleWear:"Desgaste",nozzleMaxTemp:"Temp Máx",nozzleSerial:"Serial",nozzleHardenedSteel:"Aço Endurecido",nozzleStainlessSteel:"Aço Inoxidável",nozzleTungstenCarbide:"Carboneto de Tungstênio",nozzleFlow:"Fluxo",nozzleHighFlow:"Alto Fluxo",nozzleStandardFlow:"Fluxo Padrão",firmwareUpdate:"Atualização de Firmware",firmwareInstructions:"No visor da impressora, vá para",firmwareNav:"Navegar para",settings:"Configurações",firmware:"Firmware",discoverPrinters:"Descobrir Impressoras",searching:"Procurando...",manualEntry:"Entrada Manual",addFromCloud:"Adicionar da Nuvem",toast:{printerDeleted:"Impressora excluída",missingSpoolAssignment:"Impressão iniciada em {{printer}}. Atribuição de bobina ausente para: {{slots}}",printerAdded:"Impressora adicionada",printerUpdated:"Impressora atualizada",failedToDelete:"Falha ao excluir impressora",failedToAdd:"Falha ao adicionar impressora",failedToUpdate:"Falha ao atualizar impressora",commandSent:"Comando enviado",failedToSendCommand:"Falha ao enviar comando",turnedOn:"{{name}} ligado",failedToPowerOn:"Falha ao ligar {{name}}",scriptTriggered:"Script acionado",printStopped:"Impressão parada",printPaused:"Impressão pausada",printResumed:"Impressão retomada",referenceDeleted:"Referência excluída",detectionAreaSaved:"Área de detecção salva",failedToRunScript:"Falha ao executar script",failedToStopPrint:"Falha ao parar impressão",failedToPausePrint:"Falha ao pausar impressão",failedToResumePrint:"Falha ao retomar impressão",failedToControlChamberLight:"Falha ao controlar a luz da câmara",failedToSetSpeed:"Falha ao definir a velocidade de impressão",failedToUpdateSetting:"Falha ao atualizar configuração",failedToSkipObjects:"Falha ao ignorar objetos",failedToRereadRfid:"Falha ao reler RFID",failedToCheckPlate:"Falha ao verificar a placa",failedToUpdateLabel:"Falha ao atualizar etiqueta",failedToDeleteReference:"Falha ao excluir referência",failedToSaveDetectionArea:"Falha ao salvar área de detecção",plateCheckEnabled:"Verificação da placa ativada",plateCheckDisabled:"Verificação da placa desativada",calibrationSaved:"Calibração salva!",calibrationFailed:"Falha na calibração",rfidRereadInitiated:"Releitura de RFID iniciada"},connection:{connected:"Conectado",offline:"Offline"},plateStatus:{markCleared:"Marcar placa como liberada",cleared:"Placa liberada",notCleared:"Placa não liberada",inUse:"Placa em uso"},queue:{inQueue:"{{count}} impressão na fila",inQueue_plural:"{{count}} impressões na fila"},controls:"Controles",rfid:{reread:"Releitura de RFID"},bedJog:{title:"Mover a mesa de impressão",bed:"Mesa",step:"Passo (mm)",up:"Mover mesa para cima",down:"Mover mesa para baixo",disabledWhilePrinting:"Desativado durante a impressão",notHomedTitle:"Impressora não referenciada",notHomedMessage:"A impressora não foi referenciada desde a última impressão. Execute a referência automática primeiro para um posicionamento seguro (estaciona o cabeçote, depois referencia X, Y e Z), ou mova assim mesmo — os fins de curso de software serão ignorados.",homeZ:"Referência automática",moveAnyway:"Mover assim mesmo",homingStarted:"Referenciando impressora automaticamente…"},permission:{noAdd:"Você não tem permissão para adicionar impressoras",noEdit:"Você não tem permissão para editar impressoras",noDelete:"Você não tem permissão para excluir impressoras",noControl:"Você não tem permissão para controlar impressoras",noFiles:"Você não tem permissão para acessar arquivos de impressora",noAmsRfid:"Você não tem permissão para reler RFID AMS",noSmartPlugControl:"Você não tem permissão para controlar tomadas inteligentes",noCamera:"Você não tem permissão para visualizar câmeras"},modal:{addTitle:"Adicionar Impressora",editTitle:"Editar Impressora",myPrinter:"Minha Impressora",selectModel:"Selecionar modelo...",locationGroup:"Localização / Grupo (opcional)",locationPlaceholder:"ex.: Oficina, Escritório, Porão",autoArchiveLabel:"Arquivar automaticamente impressões concluídas",fromPrinterSettings:"A partir das configurações da impressora",modelOptional:"Modelo (opcional)",saveChanges:"Salvar alterações"},skipObjects:{tooltip:"Ignorar objetos",onlyWhilePrinting:"Ignorar objetos (apenas durante a impressão)",requiresMultiple:"Ignorar objetos (requer 2+ objetos)",title:"Ignorar Objetos",matchIdsInfo:"Correspondência de IDs com o display da sua impressora",printerShowsIds:"A tela da impressora mostra os IDs dos objetos na placa de construção",skipSelected:"Ignorar Selecionados",skipping:"Ignorando...",noObjectsSelected:"Nenhum objeto selecionado",selectObjectsToSkip:"Selecione os objetos que deseja ignorar na impressão atual",skipped:"Ignorado",objectsSkipped:"Objetos ignorados",activeCount:"{{count}} ativo",waitForLayer:"Aguarde a camada 2+ para ignorar objetos (atualmente na camada {{layer}})",skip:"Ignorar",confirmTitle:"Ignorar Objeto?",confirmMessage:'Tem certeza de que deseja ignorar "{{name}}"? Isso não pode ser desfeito.'},confirm:{deleteTitle:"Excluir Impressora",deleteMessage:'Tem certeza de que deseja excluir "{{name}}"? Isso removerá todas as configurações de conexão.',deleteArchivesNote:"Todo o histórico de impressão desta impressora será permanentemente excluído.",keepArchivesNote:"O histórico de impressão será mantido, mas não estará mais associado a esta impressora.",stopTitle:"Parar Impressão",stopMessage:'Tem certeza de que deseja parar a impressão atual em "{{name}}"? Isso cancelará o trabalho de impressão.',stopButton:"Parar Impressão",pauseTitle:"Pausar Impressão",pauseMessage:'Tem certeza de que deseja pausar a impressão atual em "{{name}}"?',pauseButton:"Pausar Impressão",resumeTitle:"Retomar Impressão",resumeMessage:'Tem certeza de que deseja retomar a impressão em "{{name}}"?',resumeButton:"Retomar Impressão",powerOnTitle:"Ligar Impressora",powerOnMessage:'Tem certeza de que deseja ligar a impressora "{{name}}"?',powerOnButton:"Ligar",powerOffTitle:"Desligar Impressora",powerOffMessage:'Tem certeza de que deseja desligar a impressora "{{name}}"?',powerOffWarning:'AVISO: "{{name}}" está imprimindo no momento! Tem certeza de que deseja desligar a impressora? Isso interromperá a impressão e pode danificar a impressora.',powerOffButton:"Desligar"},bulk:{select:"Selecionar",selectAll:"Selecionar tudo",selectByLocation:"Selecionar por local",selected:"{{count}} selecionado(s)",actions:{stop:"Parar",pause:"Pausar",resume:"Retomar",clearPlate:"Limpar mesa",clearHMS:"Limpar notificações"},confirm:{stopTitle:"Parar {{count}} impressões",stopMessage:"Isso cancelará as impressões ativas em {{count}} impressora(s). Esta ação não pode ser desfeita.",stopButton:"Parar todas",pauseTitle:"Pausar {{count}} impressões",pauseMessage:"Isso pausará as impressões ativas em {{count}} impressora(s).",pauseButton:"Pausar todas",clearPlateTitle:"Limpar {{count}} mesas de impressão",clearPlateMessage:"Isso limpará a mesa de impressão em {{count}} impressora(s) e pode iniciar trabalhos na fila.",clearPlateButton:"Limpar todas"},success:"{{action}} concluído em {{count}} impressora(s)",partial:"{{succeeded}} bem-sucedido(s), {{failed}} falhou/falharam",noneApplicable:"Nenhuma impressora selecionada está no estado correto para esta ação",selectByState:"Selecionar por estado"},discovery:{title:"Descobrir Impressoras",searching:"Procurando...",scanning:"Escaneando...",scanProgress:"Escaneando... {{scanned}}/{{total}}",foundPrinters:"{{count}} impressora(s) encontrada(s)",noPrintersFound:"Nenhuma impressora encontrada",noPrintersFoundSubnet:"Nenhuma impressora encontrada na sub-rede especificada.",noPrintersFoundNetwork:"Nenhuma impressora encontrada na rede.",allConfigured:"Todas as impressoras descobertas já estão configuradas.",alreadyAdded:"Já adicionada",select:"Selecionar",manualEntry:"Entrada Manual",addFromCloud:"Adicionar da Nuvem",subnetToScan:"Sub-rede para escanear",dockerNote:"Docker detectado. Insira a sub-rede da sua impressora em notação CIDR. Requer network_mode: host no docker-compose.yml.",scanSubnet:"Escanear Sub-rede para Impressoras",discoverNetwork:"Descobrir Impressoras na Rede",scanningSubnet:"Escaneando sub-rede para impressoras Bambu...",scanningNetwork:"Escaneando rede...",serialRequired:"Serial necessário",unknown:"Desconhecido",failedToStart:"Falha ao iniciar a descoberta"},drying:{start:"Iniciar secagem",stop:"Parar secagem",temperature:"Temperatura",duration:"Duração",hours:"horas",timeRemaining:"{{time}} restante",active:"Secagem",notSupported:"Secagem não suportada",powerRequired:"Conecte o adaptador de energia AMS para ativar a secagem",startingDrying:"Iniciando secagem...",stoppingDrying:"Parando secagem...",rotateTray:"Girar o carretel durante a secagem"},filaments:"Filamentos",openCameraOverlay:"Abrir sobreposição da câmera",openCameraWindow:"Abrir câmera em nova janela",firmwareUpdateAvailable:"Atualização de firmware disponível: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Atualizado",firmwareUpdateButton:"Atualizar",plateDetection:{noPermission:"Você não tem permissão para atualizar impressoras",enabledClick:"Verificação da placa ativada - Clique para desativar",disabledClick:"Verificação da placa desativada - Clique para ativar",manageCalibration:"Gerenciar calibração da detecção da placa",calibrationRequired:"Calibração necessária",calibrationInstructions:"Certifique-se de que a placa de construção esteja <strong>completamente vazia</strong>, em seguida clique em Calibrar.",calibrationDescription:"A calibração captura uma imagem de referência da placa vazia. Verificações futuras compararão com esta referência para detectar objetos.",calibrationTip:"<strong>Dica:</strong> Você pode armazenar até 5 calibrações para diferentes placas. O sistema usa automaticamente a melhor correspondência ao verificar.",plateEmpty:"A placa parece vazia",objectsDetected:"Objetos detectados na placa",confidence:"Confiança",difference:"Diferença",analysisPreview:"Pré-visualização da análise:",analysisLegend:"Caixa verde = área de detecção, Sobreposição vermelha = diferenças em relação à calibração",savedReferences:"Referências salvas ({{count}}/{{max}})",deleteReference:"Excluir referência",labelPlaceholder:"Etiqueta...",clickToEdit:"{{label}} - Clique para editar",clickToAddLabel:"Clique para adicionar etiqueta"},speed:{title:"Velocidade de impressão",silent:"Silencioso (50%)",standard:"Padrão (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Modo do duto de ar",cooling:"Resfriamento",heating:"Aquecimento"},noSdCard:"Sem SD",door:{open:"Aberta",closed:"Fechada"},fans:{partCooling:"Ventilador de resfriamento da peça",auxiliary:"Ventilador auxiliar",chamber:"Ventilador da câmara"},clickToViewHmsErrors:"Clique para ver erros do HMS",estimatedCompletion:"Tempo estimado de conclusão",plateNumber:"Placa {{number}}",slotOptions:"Opções de slot",amsPopup:{friendlyName:"Nome do AMS",friendlyNamePlaceholder:"ex.: Nome amigável do AMS",serialNumber:"Número de série",firmwareVersion:"Firmware",save:"Salvar",clear:"Limpar",noEditPermission:"Você não tem permissão para renomear unidades AMS"},firmwareModal:{title:"Atualização de Firmware",titleUpToDate:"Informações do Firmware",currentVersion:"Atual:",latestVersion:"Última:",releaseNotes:"Notas de Lançamento",checkingPrereqs:"Verificando pré-requisitos...",sdCardReady:"Cartão SD pronto. Clique abaixo para enviar o firmware.",uploadedSuccess:"Firmware enviado para o cartão SD!",applyInstructions:"Para aplicar a atualização na sua impressora:",step1:"Na tela sensível ao toque da impressora, vá para <strong>Configurações</strong>",step2:"Navegue até <strong>Firmware</strong>",step3:"Selecione <strong>Atualizar a partir do cartão SD</strong>",step4:"A atualização levará de 10 a 20 minutos",done:"Concluído",starting:"Iniciando...",uploadFirmware:"Enviar Firmware",uploadFailed:"Falha ao iniciar o envio: {{error}}",uploadedToast:"Firmware enviado! Inicie a atualização na tela da impressora.",availableVersions:"Versões disponíveis",usable:"Utilizável",unavailable:"Indisponível",installed:"Instalada",newerBadge:"mais recente",olderBadge:"mais antiga",currentBadge:"atual"},accessCodePlaceholder:"Deixe vazio para manter o atual",roi:{title:"Área de Detecção (ROI)",xStart:"Início X",yStart:"Início Y",width:"Largura",height:"Altura",instruction:"Ajuste a área de detecção para focar na placa de construção. A caixa verde na pré-visualização mostra a área atual."},developerModeWarning:"O modo desenvolvedor LAN não está ativado em: {{names}}. Alguns recursos podem não funcionar.",howToEnable:"Como ativar",incompatibleFile:"Este arquivo foi fatiado para {{slicedFor}}, mas esta impressora é uma {{printerModel}}",dropNotPrintable:"Apenas arquivos .gcode e .gcode.3mf podem ser impressos",dropToPrint:"Solte para imprimir",cannotPrint:"Impressora ocupada"},archives:{title:"Arquivos de Impressão",searchPlaceholder:"Pesquisar arquivos...",filterByPrinter:"Filtrar por impressora",filterByStatus:"Filtrar por status",sortBy:"Ordenar por",sortNewest:"Mais recentes primeiro",sortOldest:"Mais antigos primeiro",sortName:"Nome",sortDuration:"Duração",sortLargest:"Maiores primeiro",sortSmallest:"Menores primeiro",sortSize:"Tamanho",noArchives:"Nenhum arquivo encontrado",noArchivesSearch:"Nenhum arquivo corresponde à sua pesquisa",originalPrintNotVisible:"Impressão original não visível - tente limpar os filtros",noArchivesYet:"Ainda não há arquivos",prints:"impressões",pagination:{showing:"Mostrando",to:"a",of:"de",show:"Mostrar",page:"Página",all:"Todos"},loadingArchives:"Carregando arquivos...",releaseToUpload:"Solte para enviar",showAll:"Mostrar todos",showFavoritesOnly:"Mostrar apenas favoritos",gridView:"Visualização em grade",listView:"Visualização em lista",calendarView:"Visualização em calendário",logView:"Registro de impressão",manageTags:"Gerenciar etiquetas",showFailedPrints:"Mostrar impressões falhas",hideFailedPrints:"Ocultar impressões falhas",hideDuplicates:"Ocultar duplicados",viewOriginalPrint:"Clique para visualizar a impressão original (#{{id}})",printTime:"Tempo de impressão",filamentUsed:"Filamento usado",cost:"Custo",reprint:"Reimprimir",preview:"Pré-visualizar",deleteArchive:"Excluir arquivo",deleteConfirm:"Tem certeza de que deseja excluir este arquivo?",favorite:"Favorito",unfavorite:"Remover dos favoritos",viewDetails:"Ver detalhes",status:{completed:"Concluído",failed:"Falhou",stopped:"Parado"},toast:{source3mfAttached:"Arquivo de origem 3MF anexado: {{filename}}",failedUploadSource3mf:"Falha ao enviar arquivo de origem 3MF",source3mfRemoved:"Arquivo de origem 3MF removido",failedRemoveSource3mf:"Falha ao remover arquivo de origem 3MF",f3dAttached:"F3D anexado: {{filename}}",failedUploadF3d:"Falha ao enviar F3D",f3dRemoved:"F3D removido",failedRemoveF3d:"Falha ao remover F3D",timelapseAttached:"Timelapse anexado: {{filename}}",timelapseAlreadyAttached:"Timelapse já anexado",noMatchingTimelapse:"Nenhum timelapse correspondente encontrado",failedScanTimelapse:"Falha ao escanear timelapse",failedAttachTimelapse:"Falha ao anexar timelapse",timelapseRemoved:"Timelapse removido",failedRemoveTimelapse:"Falha ao remover timelapse",timelapseUploaded:"Timelapse enviado: {{filename}}",failedUploadTimelapse:"Falha ao enviar timelapse",archiveDeleted:"Arquivo excluído",failedDeleteArchive:"Falha ao excluir arquivo",addedToFavorites:"Adicionado aos favoritos",removedFromFavorites:"Removido dos favoritos",projectUpdated:"Projeto atualizado",failedUpdateProject:"Falha ao atualizar projeto",linkCopied:"Link copiado para a área de transferência",failedCopyLink:"Falha ao copiar link",photoDeleted:"Foto excluída",failedDeletePhoto:"Falha ao excluir foto",failedDeleteArchives:"Falha ao excluir arquivos",failedUpdateFavorites:"Falha ao atualizar favoritos",exportDownloaded:"Exportação baixada",exportFailed:"Falha na exportação"},menu:{print:"Imprimir",schedule:"Agendar",openInBambuStudio:"Abrir no Slicer",slice:"Fatiar",externalLink:"Link externo",viewOnMakerWorld:"Ver no MakerWorld",preview3d:"Pré-visualização 3D",viewTimelapse:"Ver Timelapse",scanForTimelapse:"Escanear Timelapse",uploadTimelapse:"Enviar Timelapse",removeTimelapse:"Remover Timelapse",downloadSource3mf:"Baixar Source 3MF",uploadSource3mf:"Enviar Source 3MF",replaceSource3mf:"Substituir Source 3MF",removeSource3mf:"Remover Source 3MF",uploadF3d:"Enviar F3D",replaceF3d:"Substituir F3D",downloadF3d:"Baixar F3D",removeF3d:"Remover F3D",download:"Baixar",copyDownloadLink:"Copiar link de download",qrCode:"Qr Code",viewPhotos:"Ver fotos",viewPhotosCount:"Ver fotos ({{count}})",projectPage:"Página do projeto",addToFavorites:"Adicionar aos favoritos",removeFromFavorites:"Remover dos favoritos",edit:"Editar",goToProject:"Ir para o projeto: {{name}}",addToProject:"Adicionar ao projeto",removeFromProject:"Remover do projeto",loading:"Carregando...",noProjectsAvailable:"Nenhum projeto disponível",searchProjects:"Search projects…",select:"Selecionar",deselect:"Desmarcar",delete:"Excluir"},permission:{noReprint:"Você não tem permissão para reimprimir este arquivo",noAddToQueue:"Você não tem permissão para adicionar à fila",noUpdateArchives:"Você não tem permissão para atualizar arquivos",noUploadFiles:"Você não tem permissão para enviar arquivos",noDownload:"Você não tem permissão para baixar arquivos",noCopyLink:"Você não tem permissão para copiar links de download",noDelete:"Você não tem permissão para excluir este arquivo",noCreate:"Você não tem permissão para criar arquivos"},platePicker:{title:"Selecione a placa para visualizar",hint:"Este arquivo contém várias placas. Escolha uma para abrir no visualizador GCode.",plateLabel:"Placa {{index}}",objectCount:"{{count}} objeto",objectCount_plural:"{{count}} objetos",noGcode:"Este arquivo não contém G-code fatiado para visualizar. Abra-o no Bambu Studio para fatiar primeiro."},card:{previousPlate:"Placa anterior",nextPlate:"Próxima placa",plateNumber:"Placa {{index}}",moreOptions:"Clique com o botão direito para mais opções",addToFavorites:"Adicionar aos favoritos",removeFromFavorites:"Remover dos favoritos",cancelled:"cancelado",failed:"falha",duplicate:"duplicado",duplicateTitle:"Este modelo já foi impresso antes",openSource3mf:"Abrir source 3MF no Bambu Studio (clique com o botão direito para mais opções)",downloadF3d:"Baixar arquivo de design do Fusion 360",viewTimelapse:"Ver timelapse",viewPhoto:"Ver 1 foto",viewPhotos:"Ver {{count}} fotos",openFolder:"Abrir pasta: {{name}}",slicedFile:"Arquivo fatiado - pronto para imprimir",sourceFile:"Apenas arquivo fonte - nenhum mapeamento AMS disponível",gcode:"GCODE",source:"SOURCE",project:"Projeto: {{name}}",estimated:"Estimado: {{time}}",actual:"Real: {{time}}",accuracy:"Precisão: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} camada",layers:"{{count}} camadas",object:"{{count}} objeto",objects:"{{count}} objetos",slicedFor:"Fatiado para {{model}}",uploadedBy:"Enviado por",noPermissionReprint:"Você não tem permissão para reimprimir",noFileForReprint:"Nenhum arquivo 3MF disponível — o arquivo não pôde ser baixado da impressora quando a impressão foi registrada",noPermissionEdit:"Você não tem permissão para editar arquivos",noPermissionDelete:"Você não tem permissão para excluir arquivos",reprint:"Reimprimir",schedulePrint:"Agendar impressão",schedule:"Agendar",openInBambuStudio:"Abrir no Bambu Studio",openInBambuStudioToSlice:"Abrir no Bambu Studio para fatiar",slice:"Fatiar",externalLink:"Link externo",makerWorld:"MakerWorld: {{designer}}",viewProject:"Ver projeto",noExternalLink:"Nenhum link externo",preview3d:"Visualização 3D",download:"Baixar",edit:"Editar",delete:"Excluir"},modal:{deleteArchive:"Excluir Arquivo",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"? Esta ação não pode ser desfeita.',deleteButton:"Excluir",removeSource3mf:"Remover Source 3MF",removeSource3mfConfirm:'Tem certeza de que deseja remover o arquivo source 3MF de "{{name}}"? Isso excluirá o arquivo original do projeto do fatiador.',removeButton:"Remover",removeF3d:"Remover F3D",removeF3dConfirm:'Tem certeza de que deseja remover o arquivo de design do Fusion 360 de "{{name}}"?',removeTimelapse:"Remover Timelapse",removeTimelapseConfirm:'Tem certeza de que deseja remover o vídeo timelapse de "{{name}}"?',timelapse:"{{name}} - Timelapse",selectTimelapse:"Selecionar Timelapse",selectTimelapseDesc:"Nenhuma correspondência automática encontrada. Selecione o timelapse para esta impressão:",deleteArchives:"Excluir Arquivos",deleteArchivesConfirm:"Tem certeza de que deseja excluir {{count}} arquivo(s)? Esta ação não pode ser desfeita.",deleteCount:"Excluir {{count}}"},page:{title:"Arquivos",printsCount:"{{filtered}} de {{total}} impressões",dropFilesHere:"Solte arquivos .3mf aqui",releaseToUpload:"Solte para enviar",only3mfSupported:"Apenas arquivos .3mf são suportados",close:"Fechar",selected:"{{count}} selecionado(s)",selectAll:"Selecionar Todos",tags:"Tags",project:"Projeto",favorite:"Favorito",delete:"Excluir",toggledFavorites:"Favoritos alternados para {{count}} arquivo(s)",failedUpdateFavorites:"Falha ao atualizar favoritos",archivesDeleted:"{{count}} arquivo(s) excluído(s)",failedDeleteArchives:"Falha ao excluir arquivos",photoDeleted:"Foto excluída",failedDeletePhoto:"Falha ao excluir foto"},list:{name:"Nome",printer:"Impressora",date:"Data",size:"Tamanho",actions:"Ações",hasTimelapse:"Possui timelapse"},log:{date:"Data",printName:"Nome da Impressão",printer:"Impressora",user:"Usuário",status:"Status",duration:"Duração",filament:"Filamento",allPrinters:"Todas as Impressoras",allUsers:"Todos os Usuários",allStatuses:"Todos os Status",cancelled:"Cancelado",skipped:"Ignorado",dateFrom:"De",dateTo:"Até",noEntries:"Nenhuma entrada de registro de impressão encontrada",showing:"Mostrando {{count}} de {{total}} entradas",rowsPerPage:"Linhas",page:"Página",prev:"Anterior",next:"Próxima",clearLog:"Limpar Registro",clearLogTitle:"Limpar Registro de Impressão",clearLogConfirm:"Todas as entradas do registro de impressão serão permanentemente excluídas. Arquivos e itens da fila não serão afetados. Esta ação não pode ser desfeita. Tem certeza?",clearLogButton:"Limpar Tudo",cleared:"{{count}} entradas do registro de impressão limpas",clearFailed:"Falha ao limpar o registro de impressão"}},queue:{title:"Fila de Impressão",subtitle:"Agende e gerencie seus trabalhos de impressão",addToQueue:"Adicionar à Fila",print:"Imprimir",reprint:"Reimprimir",schedulePrint:"Agendar Impressão",editQueueItem:"Editar Item da Fila",printToPrinters:"Imprimir para {{count}} Impressoras",queueToPrinters:"Adicionar à Fila para {{count}} Impressoras",queueSelectedPlates:"Adicionar {{count}} placas à fila",selectAllPlates:"Selecionar todas as {{count}} placas",deselectAll:"Desmarcar tudo",printQueued:"Impressão adicionada à fila",itemsQueued:"{{count}} itens adicionados à fila",sending:"Enviando...",sendingProgress:"Enviando {{current}}/{{total}}...",adding:"Adicionando...",addingProgress:"Adicionando {{current}}/{{total}}...",savingProgress:"Salvando {{current}}/{{total}}...",clearQueue:"Limpar Fila",clearHistory:"Limpar Histórico",emptyQueue:"Fila vazia",position:"Posição",scheduledTime:"Hora Agendada",moveUp:"Mover para Cima",moveDown:"Mover para Baixo",startNow:"Iniciar Agora",printingInProgress:"Impressão em andamento...",viewArchive:"Ver Arquivo",viewInFileManager:"Ver no Gerenciador de Arquivos",itemCount:"{{count}} item",itemCount_plural:"{{count}} itens",dragToReorder:"Arraste para reordenar (apenas ASAP)",reorderHint:"A posição afeta apenas itens ASAP. Itens agendados são executados no horário definido.",sjf:{label:"SJF",tooltip:"Trabalho mais curto primeiro — o agendador prioriza impressões mais curtas"},addedBy:"Adicionado por {{name}}",nextInQueue:"Próximo na fila",clearPlateSuccess:"Placa limpa — pronta para a próxima impressão",plateNumber:"Placa {{index}}",quantity:"Quantidade",quantityHint:"Cria {{count}} itens na fila",activeBatches:"Lotes ativos",batchProgress:"{{completed}} de {{total}} concluídos",cancelBatch:"Cancelar restantes",batchCancelled:"Itens restantes do lote cancelados",cancelBatchConfirmTitle:"Cancelar lote",cancelBatchConfirmMessage:"Cancelar todos os itens pendentes restantes neste lote?",batch:"Lote",sections:{currentlyPrinting:"Imprimindo Atualmente",queued:"Na Fila",history:"Histórico"},status:{pending:"Pendente",waiting:"Aguardando",printing:"Imprimindo",paused:"Pausado",completed:"Concluído",failed:"Falhou",skipped:"Ignorado",cancelled:"Cancelado"},summary:{printing:"Imprimindo",queued:"Na Fila",totalTime:"Tempo Total da Fila",totalWeight:"Peso Total da Fila",history:"Histórico"},filter:{allPrinters:"Todas as Impressoras",unassigned:"Não Atribuído",allStatus:"Todos os Status",allLocations:"Todos os Locais",any:"Qualquer"},sort:{byPosition:"Ordenar por Posição",byName:"Ordenar por Nome",byPrinter:"Ordenar por Impressora",bySchedule:"Ordenar por Agendamento",byDate:"Ordenar por Data",ascendingOldest:"Crescente (mais antigo primeiro)",descendingNewest:"Decrescente (mais recente primeiro)"},badges:{staged:"Preparado (início manual)",requiresPrevious:"Requer sucesso anterior",autoPowerOff:"Desligamento automático",gcodeInjection:"G-code"},empty:{title:"Nenhuma impressão agendada",description:'Agende uma impressão a partir da página de Arquivos usando a opção "Agendar" no menu de contexto, ou arraste e solte arquivos para começar.'},time:{asap:"ASAP",overdue:"Atrasado",now:"Agora",lessThanMinute:"Em menos de um minuto",inMinutes:"Em {{count}} min",inHours:"Em {{count}} horas"},actions:{stopPrint:"Parar Impressão",startPrint:"Iniciar Impressão",requeue:"Reenfileirar"},bulkEdit:{title:"Editar {{count}} Item",title_plural:"Editar {{count}} Itens",description:"Apenas as configurações alteradas serão aplicadas aos itens selecionados.",printer:"Impressora",noChange:"— Sem alterações —",queueOptions:"Opções de Fila",staged:"Preparado (início manual)",autoPowerOff:"Desligamento automático após impressão",requirePrevious:"Requer sucesso anterior",printOptions:"Opções de Impressão",bedLevelling:"Nivelamento da Mesa",flowCalibration:"Calibração de Fluxo",vibrationCalibration:"Calibração de Vibração",layerInspection:"Inspeção da Primeira Camada",timelapse:"Timelapse",useAms:"Usar AMS",applyChanges:"Aplicar Alterações",selectAll:"Selecionar Todos",deselectAll:"Desmarcar Todos",selected:"{{count}} selecionado(s)",editSelected:"Editar Selecionados",cancelSelected:"Cancelar Selecionados"},confirm:{cancelTitle:"Cancelar Impressão Agendada",cancelMessage:'Tem certeza de que deseja cancelar "{{name}}"?',stopTitle:"Parar Impressão",stopMessage:'Tem certeza de que deseja parar a impressão atual "{{name}}"? Isso cancelará o trabalho de impressão na impressora.',removeTitle:"Remover do Histórico",removeMessage:'Tem certeza de que deseja remover "{{name}}" do histórico da fila?',clearHistoryTitle:"Limpar Histórico",clearHistoryMessage:"Tem certeza de que deseja remover todos os {{count}} itens do histórico?",cancelButton:"Cancelar Impressão",stopButton:"Parar Impressão",thisPrint:"esta impressão",thisItem:"este item"},toast:{cancelled:"Item da fila cancelado",cancelFailed:"Falha ao cancelar item",removed:"Item da fila removido",removeFailed:"Falha ao remover item",stopped:"Impressão parada",stopFailed:"Falha ao parar impressão",released:"Impressão liberada para a fila",startFailed:"Falha ao iniciar impressão",reorderFailed:"Falha ao reordenar fila",historyCleared:"Limpar {{count}} item(s) do histórico",clearHistoryFailed:"Falha ao limpar histórico",updateFailed:"Falha ao atualizar itens",bulkCancelled:"Cancelado {{count}} item(s)",bulkCancelFailed:"Falha ao cancelar itens"},timeline:{listView:"Lista",timelineView:"Linha do tempo",unassigned:"Não atribuído",noData:"Nenhuma impressão agendada para este dia",allDoneBy:"Todas as impressões concluídas até {{time}}",staged:"Preparado",filterAll:"Mostrar tudo",filterPrinting:"Imprimindo",filterQueued:"Na fila",time:{anyMoment:"a qualquer momento",minutesLeft:"{{minutes}}m restantes",hoursLeft:"{{hours}}h restantes",hoursMinutesLeft:"{{hours}}h {{minutes}}m restantes"},day:{previous:"Dia anterior",next:"Próximo dia",today:"Hoje"}},permissions:{noStopPrint:"Você não tem permissão para parar impressões",noStartPrint:"Você não tem permissão para iniciar impressões",noEdit:"Você não tem permissão para editar este item da fila",noCancel:"Você não tem permissão para cancelar este item da fila",noRequeue:"Você não tem permissão para reenfileirar itens",noRemove:"Você não tem permissão para remover este item da fila",noClearHistory:"Você não tem permissão para limpar todo o histórico",noEditItems:"Você não tem permissão para editar itens da fila",noCancelItems:"Você não tem permissão para cancelar itens da fila"}},backgroundDispatch:{unknownFile:"Unknown file",unknownPrinter:"Unknown printer",startingPrints:"Starting prints",progressSummary:"{{complete}}/{{total}} complete • Dispatched: {{dispatched}} • Processing: {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Dismiss dispatch toast",cancelDispatchJob:"Cancel dispatch job",cancel:"Cancel",cancelling:"Cancelling…",awaitingPrinter:"Aguardando impressora…",status:{dispatched:"Dispatched",processing:"Processing",completed:"Completed",failed:"Failed",cancelled:"Cancelled"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Dispatch cancelled",cancelFailed:"Failed to cancel dispatch",completeWithFailures:"Background dispatch complete: {{completed}} succeeded, {{failed}} failed",completeSuccess:"Background dispatch complete: {{completed}} succeeded",printStartedRemaining:"{{completed}} impressão(ões) iniciada(s), {{remaining}} enviando..."}},stats:{title:"Dashboard",subtitle:"Arraste os widgets para reorganizar. Clique no ícone de olho para ocultar.",overview:"Visão Geral",totalPrints:"Total de Impressões",successRate:"Taxa de Sucesso",totalPrintTime:"Tempo Total de Impressão",printTime:"Tempo de Impressão",totalFilament:"Filamento Total Utilizado",filamentUsed:"Filamento Utilizado",filamentCost:"Custo do Filamento",totalCost:"Custo Total",energyUsed:"Energia Utilizada",energyCost:"Custo da Energia",energyWarmingUpTooltip:"O monitoramento de energia ainda está coletando snapshots por hora. Os totais por período ficarão precisos quando houver pelo menos um snapshot antes do intervalo selecionado. Valores iniciais podem ser subestimados.",averagePrintTime:"Tempo Médio de Impressão",printsPerDay:"Impressões por Dia",byPrinter:"Por Impressora",printsByPrinter:"Impressões por Impressora",byMaterial:"Por Material",byMonth:"Por Mês",last7Days:"Últimos 7 Dias",last30Days:"Últimos 30 Dias",last90Days:"Últimos 90 Dias",allTime:"Todo o Tempo",quickStats:"Estatísticas Rápidas",printActivity:"Atividade de Impressão",filamentTypes:"Tipos de Filamento",filamentTrends:"Tendências de Filamento",failureAnalysis:"Análise de Falhas",timeAccuracy:"Precisão do Tempo",successful:"Bem-sucedido:",failed:"Falhou:",perfectEstimate:"100% = estimativa perfeita",noTimeAccuracyData:"Nenhum dado de precisão de tempo disponível",noFilamentData:"Nenhum dado de filamento disponível",noPrinterData:"Nenhum dado de impressora disponível",noPrintData:"Nenhum dado de impressão disponível",noPrintDataLast30Days:"Nenhum dado de impressão nos últimos 30 dias",failureReasons:"Razões de Falha",topFailureReasons:"Principais Razões de Falha",failedPrintsCount:"{{failed}} / {{total}} impressões falharam",lastWeekRate:"Última semana: {{rate}}%",resetLayout:"Redefinir Layout",recalculateCosts:"Recalcular Custos",recalculateCostsHint:"Recalcular todos os custos do arquivo usando os preços atuais do filamento",exportStats:"Exportar Estatísticas",exportAsCsv:"Exportar como CSV",exportAsExcel:"Exportar como Excel",hiddenCount:"{{count}} Oculto",exportDownloaded:"Exportação baixada",exportFailed:"Falha na exportação",layoutReset:"Layout redefinido",recalculatedCosts:"Custos recalculados para {{count}} arquivos",recalculateFailed:"Falha ao recalcular custos",loadingStats:"Carregando estatísticas...",noPermissionResetLayout:"Você não tem permissão para redefinir o layout",noPermissionRecalculate:"Você não tem permissão para recalcular custos",noPrintDataInRange:"Sem dados no período selecionado",periodFilament:"Filamento usado",periodCost:"Custo",avgPerPrint:"Média por impressão",usageOverTime:"Uso ao longo do tempo",filamentByWeight:"Peso",printDuration:"Duração da impressão",printerUtilization:"Utilização da impressora",filamentSuccess:"Sucesso por material",printHabits:"Hábitos de impressão",printTimeOfDay:"Horário de impressão",colorDistribution:"Distribuição de cores",noColorData:"Nenhum dado de cor disponível",records:"Recordes",longestPrint:"Impressão mais longa",heaviestPrint:"Impressão mais pesada",mostExpensivePrint:"Mais cara",busiestDay:"Dia mais movimentado",successStreak:"Sequência de sucesso",streakPrint:"impressão consecutiva",streakPrints:"{{count}} impressões consecutivas",printerStats:"Estatísticas da impressora",hours:"horas",avgPrints:"Méd. impressões",noArchiveData:"Nenhum dado de impressão disponível",filamentByTime:"Tempo",avgWeight:"Méd. peso",avgTime:"Méd. tempo",filamentByPrints:"Impressões",timeframe:{today:"Hoje","this-week":"Esta semana","this-month":"Este mês","last-7":"Últimos 7 dias","last-30":"Últimos 30 dias","last-90":"Últimos 90 dias","this-year":"Este ano","all-time":"Todo o período",custom:"Personalizado",from:"De",to:"Até"},allUsers:"Todos os Usuários",noUser:"Sem Usuário (Sistema)",filterByUser:"Filtrar por Usuário"},maintenance:{title:"Manutenção",overview:"Visão Geral",allOk:"Todas as manutenções estão em dia",dueCount:"{{count}} item pendente",dueCount_plural:"{{count}} itens pendentes",warningCount:"{{count}} aviso",warningCount_plural:"{{count}} avisos",totalPrintTime:"Tempo Total de Impressão",nextMaintenance:"Próxima Manutenção",nothingDue:"Nada pendente",tasks:"Tarefas",lastPerformed:"Última execução",interval:"Intervalo",hoursRemaining:"{{hours}}h restantes",hoursOverdue:"{{hours}}h atrasadas",markDone:"Marcar como Concluída",performMaintenance:"Realizar Manutenção",history:"Histórico",noHistory:"Nenhum histórico de manutenção",editPrintHours:"Editar Horas de Impressão",currentHours:"Horas Atuais",statusTab:"Status",settingsTab:"Configurações",overdueCount:"{{count}} atrasado",dueSoonCount:"{{count}} prestes a vencer",dueSoon:"Prestes a vencer",allGood:"Tudo certo",overdueBy:"Atrasado por {{duration}}",dueIn:"Vence em {{duration}}",timeLeft:"{{duration}} restantes",day:"1 dia",days:"{{count}} dias",week:"1 semana",weeks:"{{count}} semanas",month:"1 mês",months:"{{count}} meses",year:"1 ano",maintenanceTypes:"Tipos de Manutenção",maintenanceTypesDescription:"Tipos de sistema e suas tarefas de manutenção personalizadas",addCustomType:"Adicionar Tipo Personalizado",restoreDefaults:"Restaurar Tarefas Padrão",intervalType:"Tipo de Intervalo",intervalValue:"Intervalo ({{type}})",icon:"Icon",documentationLink:"Link da Documentação (opcional)",assignToPrinters:"Atribuir a Impressoras",selectAtLeastOnePrinter:"Selecione pelo menos uma impressora",addType:"Adicionar Tipo",custom:"Personalizado",printHours:"Horas de Impressão",calendarDays:"Dias de Calendário",exampleName:"ex., Substituir Filtro HEPA",viewDocumentation:"Ver documentação",timeBasedInterval:"Intervalo baseado em tempo",intervalOverrides:"Substituições de Intervalo",intervalOverridesDescription:"Personalize os intervalos para impressoras específicas",assignedToPrinters:"Atribuído a impressoras:",noPrintersAssigned:"Nenhuma impressora atribuída",addPrinterShort:"Adicionar:",printersAssignedClick:"{{count}} impressora(s) atribuída(s) - clique para gerenciar",removeFromPrinter:"Remover desta impressora",types:{lubricateCarbonRods:"Lubricar Barras de Carbono",lubricateRails:"Lubricar Trilhos Lineares",cleanNozzle:"Limpar Bico/Hotend",checkBelts:"Verificar Tensão das Correias",cleanBuildPlate:"Limpar Plataforma de Impressão",checkExtruder:"Verificar Engrenagens do Extrusor",checkCooling:"Verificar Ventiladores de Resfriamento",generalInspection:"Inspeção Geral",cleanCarbonRods:"Limpar Barras de Carbono",lubricateSteelRods:"Lubrificar Barras de Aço",cleanSteelRods:"Limpar Barras de Aço",cleanLinearRails:"Limpar Trilhos Lineares",checkPtfeTube:"Verificar Tubo PTFE",replaceHepaFilter:"Substituir Filtro HEPA",replaceCarbonFilter:"Substituir Filtro de Carbono",lubricateLeftNozzleRail:"Lubrificar Trilho do Bico Esquerdo"},maintenanceComplete:"Manutenção marcada como concluída",typeUpdated:"Tipo de manutenção atualizado",typeDeleted:"Tipo de manutenção excluído",defaultsRestored:"Restauradas {{count}} tarefa(s) padrão",printHoursUpdated:"Horas de impressão atualizadas",printerAssigned:"Impressora atribuída",printerRemoved:"Impressora removida",deleteTypeConfirm:'Excluir "{{name}}"?',deleteSystemTypeTitle:"Excluir tarefa de manutenção padrão?",deleteSystemTypeMessage:'Tem certeza de que deseja excluir a tarefa de manutenção padrão "{{name}}"?',noPermissionUpdate:"Você não tem permissão para atualizar itens de manutenção",noPermissionPerform:"Você não tem permissão para realizar manutenção",noPermissionEditTypes:"Você não tem permissão para editar tipos de manutenção",noPermissionDeleteTypes:"Você não tem permissão para excluir tipos de manutenção",noPermissionEditHours:"Você não tem permissão para editar horas de impressão",noPermissionRemovePrinter:"Você não tem permissão para remover atribuições de impressora",noPermissionAssignPrinter:"Você não tem permissão para atribuir impressoras",noPermissionEditIntervals:"Você não tem permissão para editar intervalos",configureSettings:"Configure tipos de manutenção e intervalos"},settings:{title:"Configurações",general:"Geral",tabs:{general:"Geral",smartPlugs:"Tomadas Inteligentes",notifications:"Notificações",queue:"Workflow",filament:"Filamento",network:"Rede",apiKeys:"Chaves API",virtualPrinter:"Impressora Virtual",failureDetection:"Detecção de Falhas",users:"Autenticação",backup:"Backup",emailAuth:"Autenticação por Email",ldap:"LDAP",twoFa:"Autenticação 2FA",oidc:"SSO / OIDC",spoolbuddy:"SpoolBuddy"},ldap:{title:"Autenticação LDAP",enabledDesc:"A autenticação LDAP está ativada",disabledDesc:"A autenticação LDAP está desativada",disabledHint:"Configure e salve as configurações LDAP abaixo, depois ative.",enabled:"Autenticação LDAP ativada",disabled:"Autenticação LDAP desativada",feature1:"Usuários podem fazer login com credenciais LDAP",feature2:"A conta de administrador local permanece como fallback",feature3:"Grupos LDAP são mapeados para grupos BamBuddy no login",serverConfig:"Configuração do Servidor LDAP",serverUrl:"URL do servidor",serverUrlHint:"Use ldap:// para padrão ou ldaps:// para conexões SSL",security:"Segurança",securityHint:"StartTLS atualiza uma conexão simples para TLS. LDAPS usa TLS desde o início.",bindDn:"Bind DN (conta de serviço)",bindPassword:"Senha Bind",searchBase:"Base DN de pesquisa",userFilter:"Filtro de pesquisa de usuário",userFilterHint:"{username} é substituído pelo nome de usuário. Use (uid={username}) para OpenLDAP.",autoProvision:"Provisionamento automático de usuários",autoProvisionHint:"Criar automaticamente uma conta BamBuddy no primeiro login LDAP",defaultGroup:"Grupo padrão",defaultGroupNone:"— Nenhum (sem fallback) —",defaultGroupHint:"Grupo de fallback atribuído quando um usuário LDAP se autentica mas não está em nenhum grupo LDAP mapeado. Deixe vazio para manter usuários não mapeados sem permissões.",groupMapping:"Mapeamento de grupos (JSON)",groupMappingHint:"Mapear DNs de grupos LDAP para grupos BamBuddy. Grupos disponíveis: ",testConnection:"Testar conexão",settingsSaved:"Configurações LDAP salvas",errors:{serverRequired:"URL do servidor LDAP é obrigatória",searchBaseRequired:"Base DN de pesquisa é obrigatória",enableAuthFirst:"Ative a autenticação primeiro",configureLdapFirst:"Salve as configurações LDAP primeiro"}},email:{smtpSettings:"Configuração SMTP",smtpHost:"Servidor SMTP",smtpPort:"Porta SMTP",security:"Segurança",authentication:"Autenticação",username:"Nome de Usuário",password:"Senha",fromEmail:"Email de Remetente",fromName:"Nome de Remetente",testConnection:"Testar Conexão SMTP",testRecipient:"Email de Teste",sendTest:"Enviar Email de Teste",sending:"Enviando...",save:"Salvar Configurações",saving:"Salvando...",advancedAuth:"Autenticação Avançada",advancedAuthEnabled:"Autenticação Avançada está habilitada",advancedAuthEnabledDesc:"Recursos de gerenciamento de usuários baseados em email estão ativos. Novos usuários receberão senhas geradas automaticamente por email, e os usuários podem redefinir suas senhas através do recurso de esqueci minha senha.",advancedAuthDisabled:"Autenticação Avançada está desabilitada",advancedAuthDisabledDesc:"Habilite a autenticação avançada para ativar recursos baseados em email para gerenciamento de usuários.",enable:"Habilitar",disable:"Desabilitar",feature1:"Senhas são geradas automaticamente e enviadas por email para novos usuários",feature2:"Usuários podem fazer login com nome de usuário ou email",feature3:"Recurso de esqueci minha senha está disponível",feature4:"Administradores podem redefinir senhas de usuários via email",errors:{requiredFields:"Por favor, preencha todos os campos obrigatórios",usernameRequired:"Nome de usuário é obrigatório quando a autenticação está habilitada",enterTestEmail:"Por favor, insira um endereço de email de teste",smtpServerAndEmail:"Por favor, preencha o servidor SMTP e o email de remetente antes de testar",usernamePasswordRequired:"Nome de usuário e senha são obrigatórios quando a autenticação está habilitada",configureSmtpFirst:"Por favor, configure e teste as configurações SMTP primeiro",enableAuthFirst:"Por favor, habilite a autenticação primeiro para usar os recursos baseados em e-mail."},success:{settingsSaved:"Configurações SMTP salvas com sucesso"},securityOptions:{starttls:"STARTTLS (Porta 587)",ssl:"SSL/TLS (Porta 465)",none:"Nenhuma (Porta 25)"},authOptions:{enabled:"Habilitado",disabled:"Desabilitado"}},appearance:"Aparência",notifications:"Notificações",smartPlugs:"Tomadas Inteligentes",spoolman:"Spoolman",updates:"Atualizações",language:"Idioma",languageDescription:"Selecione seu idioma preferido",theme:"Tema",themeLight:"Claro",themeDark:"Escuro",themeSystem:"Sistema",defaultView:"Visualização Padrão",defaultViewDescription:"Página a ser exibida ao abrir o aplicativo",checkForUpdates:"Verificar Atualizações",autoUpdate:"Atualização Automática",currentVersion:"Versão Atual",latestVersion:"Última Versão",upToDate:"Você está atualizado",updateAvailable:"Atualização disponível",notificationLanguage:"Idioma das Notificações",notificationLanguageDescription:"Idioma para notificações push",bedCooledThreshold:"Limite de Resfriamento da Cama",bedCooledThresholdDescription:"Temperatura abaixo da qual a cama é considerada resfriada após uma impressão",userNotificationsEnabled:"Notificações do Usuário",userNotificationsEnabledDescription:"Ativa o menu de notificações do usuário e notificações por e-mail para eventos de impressão. Requer Autenticação Avançada.",userNotificationsDisabledHint:"Ative a Autenticação Avançada para usar as notificações do usuário.",notificationProviders:"Provedores de Notificação",addProvider:"Adicionar Provedor",editProvider:"Editar Provedor",providerType:"Tipo de Provedor",testNotification:"Testar Notificação",testSuccess:"Notificação de teste enviada com sucesso",testFailed:"Falha ao enviar notificação de teste",quietHours:"Horas de Silêncio",quietHoursDescription:"Não perturbe durante essas horas",quietHoursStart:"Início",quietHoursEnd:"Fim",events:{title:"Eventos de Notificação",printStart:"Impressão Iniciada",printComplete:"Impressão Concluída",printFailed:"Falha na Impressão",printStopped:"Impressão Interrompida",printProgress:"Marcos de Progresso",printProgressDescription:"Notificar em 25%, 50%, 75%",printerOffline:"Impressora Offline",printerError:"Erro na Impressora",filamentLow:"Filamento Baixo",maintenanceDue:"Manutenção Pendente",maintenanceDueDescription:"Notificar quando a manutenção for necessária"},smartPlug:{title:"Tomadas Inteligentes",add:"Adicionar Tomada Inteligente",edit:"Editar Tomada Inteligente",name:"Nome",ipAddress:"Endereço IP",linkedPrinter:"Impressora Vinculada",autoOn:"Ligar Automaticamente",autoOnDescription:"Ligar quando a impressão começar",autoOff:"Desligar Automaticamente",autoOffDescription:"Desligar após a conclusão da impressão",offDelay:"Atraso para Desligar",offDelayMinutes:"Minutos após a impressão",offDelayTemp:"Quando o bico estiver abaixo da temperatura",currentState:"Estado Atual",turnOn:"Ligar",turnOff:"Desligar"},filamentTracking:"Rastreamento de Filamento",filamentTrackingDesc:"Escolha como rastrear seus rolos de filamento. Você pode usar o inventário interno ou conectar a um servidor Spoolman externo.",filamentChecks:"Verificações de filamento",disableFilamentWarnings:"Desativar avisos de filamento",disableFilamentWarningsDesc:"Não mostrar avisos sobre filamento insuficiente ao imprimir ou adicionar à fila",preferLowestFilament:"Preferir filamento com menor resto",preferLowestFilamentDesc:"Quando vários carretéis correspondem, usar o com menos filamento restante",trackingModeBuiltIn:"Inventário Interno",trackingModeBuiltInDesc:"Correspondência automática de RFID e rastreamento de uso incluídos",trackingModeSpoolmanDesc:"Servidor de gerenciamento de filamento externo",builtInFeatureRfid:"Detecta automaticamente rolos RFID da Bambu Lab no AMS",builtInFeatureUsage:"Rastreia o consumo de filamento por impressão",builtInFeatureCatalog:"Gerencia rolos, cores e perfis de fator K",builtInFeatureThirdParty:"Rolos de terceiros podem ser atribuídos aos rolos do inventário",amsSyncButton:"Sincronizar Pesos do AMS",amsSyncTitle:"Sincronizar Pesos dos Rolos do AMS",amsSyncMessage:"Isso substituirá todos os pesos dos rolos do inventário pelos valores atuais de % restante do AMS das impressoras conectadas. Use isso para recuperar dados de peso corrompidos. As impressoras devem estar online.",amsSyncing:"Sincronizando...",amsSyncSuccess:"{{synced}} rolo(s) sincronizado(s), {{skipped}} ignorado(s)",amsSyncError:"Falha ao sincronizar pesos do AMS",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL do seu servidor Spoolman (por exemplo, http://localhost:7912)",spoolmanConnected:"Conectado",spoolmanDisconnected:"Desconectado",status:"Status",connect:"Conectar",disconnect:"Desconectar",howSyncWorks:"Como a Sincronização Funciona",syncInfoRfidOnly:"Apenas rolos oficiais da Bambu Lab com RFID são sincronizados",syncInfoAutoCreate:"Novos rolos são criados automaticamente no Spoolman na primeira sincronização",syncInfoThirdPartySkipped:"Rolos não oficiais da Bambu Lab (terceiros, reabastecidos) são ignorados",linkingExistingSpools:"Vinculando Rolos Existentes",linkingExistingSpoolsDesc:'Para vincular rolos existentes do Spoolman ao seu AMS, passe o mouse sobre um slot do AMS e clique em "Vincular ao Spoolman".',syncMode:"Modo de Sincronização",syncModeAuto:"Automático",syncModeManual:"Apenas Manual",syncModeAutoDesc:"Os dados do AMS são sincronizados automaticamente quando alterações são detectadas",syncModeManualDesc:"Somente sincronize quando acionado manualmente",syncAmsData:"Sincronizar Dados do AMS",syncAmsDataDesc:"Sincronize manualmente os dados do AMS da impressora com o Spoolman",allPrinters:"Todas as Impressoras",noDefaultPrinter:"Sem padrão (perguntar a cada vez)",sidebarOrder:"Ordem da barra lateral",saveThumbnails:"Salvar miniaturas",captureFinishPhoto:"Capturar foto de conclusão",noPrintersConfigured:"Nenhuma impressora configurada",archiveMode:{always:"Sempre criar entrada de arquivo",never:"Nunca criar entrada de arquivo",ask:"Perguntar a cada vez"},checkForUpdatesLabel:"Verificar atualizações",checkPrinterFirmware:"Verificar firmware da impressora",includeBetaUpdates:"Incluir versões beta",includeBetaUpdatesDesc:"Notificar sobre versões beta e pré-lançamento ao verificar atualizações",enableRetry:"Habilitar tentativa",homeAssistantDescription:"Controlar tomadas inteligentes via Home Assistant",environmentManagedLabel:"(Gerenciado pelo Ambiente)",autoEnabledViaEnv:"Habilitado automaticamente via variáveis de ambiente",urlFromEnvReadOnly:"Valor definido pela variável de ambiente HA_URL (somente leitura)",tokenFromEnvReadOnly:"Valor definido pela variável de ambiente HA_TOKEN (somente leitura)",mqttConnectedTo:"Conectado a",prometheusDescription:"Expor dados da impressora no formato Prometheus",noSmartPlugsTitle:"Nenhuma tomada inteligente configurada",noSmartPlugsDescription:"Adicione uma tomada inteligente baseada em Tasmota para monitorar o consumo de energia e automatizar o controle de energia.",noProvidersTitle:"Nenhum provedor configurado",noProvidersDescription:"Adicione um provedor para receber alertas.",noTemplatesAvailable:"Nenhum modelo disponível. Reinicie o backend para gerar os modelos padrão.",apiPermissionView:"Visualizar status da impressora e fila",apiPermissionEdit:"Adicionar e remover itens da fila de impressão",apiKeysEmptyTitle:"Nenhuma chave API",apiKeysEmptyDescription:"Crie uma chave API para integrar com serviços externos.",noUsersFound:"Nenhum usuário encontrado",noGroupsFound:"Nenhum grupo encontrado",noGroupsAvailable:"Nenhum grupo disponível",passwordsDoNotMatch:"As senhas não coincidem",systemGroupWarning:"Os nomes dos grupos do sistema não podem ser alterados",authDisabledTitle:"Autenticação Desativada",authDisabledFeature1:"Exigir login para acessar o sistema",authDisabledFeature2:"Criar múltiplos usuários com permissões baseadas em grupos",authDisabledFeature3:"Controlar acesso com mais de 50 permissões granulares",userHasCreated:"Este usuário criou:",userItemsQuestion:"O que você gostaria de fazer com esses itens?",deleteUserConfirm:"Tem certeza de que deseja excluir este usuário?",actionCannotBeUndone:"Esta ação não pode ser desfeita.",addFirstSmartPlug:"Adicione sua primeira tomada inteligente",providers:"Provedores",log:"Registro",testAll:"Testar tudo",testResults:"Resultados do teste",testPassedCount:"{{count}} aprovado",testFailedCount:"{{count}} falhou",messageTemplates:"Modelos de mensagem",messageTemplatesDescription:"Personalize as mensagens de notificação para cada evento.",apiKeys:"Chaves API",apiKeysDescription:"Crie chaves API para integrações externas e webhooks.",createKey:"Criar Chave",apiKeyCreated:"Chave API criada com sucesso",apiKeyCopyWarning:"Copie esta chave agora - ela não será exibida novamente!",useInApiBrowser:"Usar no Navegador API",createNewApiKey:"Criar Nova Chave API",keyName:"Nome da Chave",keyNamePlaceholder:"e.g., Home Assistant, OctoPrint",readStatus:"Status de Leitura",readStatusDescription:"Visualizar status da impressora e fila",manageQueue:"Gerenciar Fila",manageQueueDescription:"Adicionar e remover itens da fila de impressão",controlPrinter:"Controlar Impressora",controlPrinterDescription:"Pausar, retomar e parar impressões",unnamedKey:"Chave Sem Nome",lastUsed:"Último uso",read:"Ler",control:"Controlar",createFirstKey:"Crie sua primeira chave",webhookEndpoints:"Endpoints de Webhook",webhookApiKeyHint:"Use sua chave API no cabeçalho X-API-Key.",webhook:{getAllStatus:"Obter status de todas as impressoras",getSpecificStatus:"Obter status de uma impressora específica",addToQueue:"Adicionar à fila de impressão",pausePrint:"Pausar impressão",resumePrint:"Retomar impressão",stopPrint:"Parar impressão"},apiBrowser:"Navegador API",apiBrowserDescription:"Explore e teste todos os endpoints de API disponíveis.",apiKeyForTesting:"Chave API para Teste",apiKeyPlaceholder:"Cole sua chave API aqui para testar endpoints autenticados...",apiKeyHint:"Esta chave será enviada como cabeçalho X-API-Key nas solicitações.",deleteApiKeyTitle:"Excluir Chave API",deleteApiKeyMessage:"Tem certeza de que deseja excluir esta chave API? Quaisquer integrações usando esta chave deixarão de funcionar.",deleteKey:"Excluir Chave",amsDisplayThresholds:"Limiares de Exibição AMS",amsThresholdsDescription:"Configure os limiares de cores para os indicadores de umidade e temperatura do AMS.",humidity:"Umidade",goodGreen:"Bom (verde)",fairOrange:"Razoável (laranja)",aboveFairBad:"Acima do limiar razoável mostra como vermelho (ruim)",fairAlsoDryingThreshold:"Este limiar também é usado para acionar a secagem automática",temperature:"Temperatura",goodBlue:"Bom (azul)",aboveFairHot:"Acima do limiar razoável mostra como vermelho (quente)",historyRetention:"Retenção de Histórico",keepSensorHistory:"Manter histórico do sensor por",historyRetentionDescription:"Dados antigos de umidade e temperatura serão automaticamente excluídos",defaultPrintOptions:"Opções de impressão padrão",defaultPrintOptionsDescription:"Defina valores padrão para opções de impressão. Podem ser alterados no diálogo de impressão.",defaultBedLevelling:"Nivelamento da mesa",defaultBedLevellingDesc:"Nivelar automaticamente a mesa antes da impressão",defaultFlowCali:"Calibração de fluxo",defaultFlowCaliDesc:"Calibrar fluxo de extrusão",defaultVibrationCali:"Calibração de vibração",defaultVibrationCaliDesc:"Reduzir artefatos de ringing",defaultLayerInspect:"Inspeção da primeira camada",defaultLayerInspectDesc:"Inspeção IA da primeira camada",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Gravar vídeo timelapse",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Confirmação de placa livre",requirePlateClear:"Exigir confirmação de placa livre",requirePlateClearDescription:'Quando ativado, o agendador aguarda uma confirmação de placa livre por impressora antes de iniciar impressões na fila em impressoras com trabalhos concluídos. Desativar isso também oculta o indicador de status da placa e o botão "Marcar placa como liberada" nos cartões das impressoras.',gcodeInjection:"Injeção de G-code",gcodeInjectionDescription:'Configure G-code personalizado para injetar no início e/ou no final das impressões para sistemas de impressão automática como Farmloop, SwapMod, AutoClear e Printflow 3D. Os snippets são configurados por modelo de impressora e aplicados quando "Injetar G-code" está ativado em um item da fila.',gcodeInjectionNoPrinters:"Nenhuma impressora encontrada. Adicione impressoras para configurar snippets de G-code.",gcodeStartLabel:"G-code inicial",gcodeEndLabel:"G-code final",gcodeStartPlaceholder:"G-code inserido antes do início da impressão...",gcodeEndPlaceholder:"G-code adicionado após o término da impressão...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Secagem Automática",queueDryingDescription:"Secar automaticamente o filamento AMS quando a impressora estiver ociosa entre impressões na fila. Usa o limite de umidade acima.",queueDryingEnabled:"Ativar secagem automática",queueDryingEnabledDescription:"Iniciar secagem AMS automaticamente quando a impressora estiver ociosa e a umidade estiver acima do limite",queueDryingBlock:"Aguardar conclusão da secagem",queueDryingBlockDescription:"Bloquear a fila de impressão até a secagem terminar. Quando desativado, impressões têm prioridade.",ambientDryingEnabled:"Secagem ambiente",ambientDryingEnabledDescription:"Secar automaticamente o filamento em impressoras ociosas quando a umidade exceder o limite, mesmo sem impressões na fila.",dryingPresets:"Predefinições de secagem",dryingPresetsDescription:"Temperatura e duração por tipo de filamento. AMS 2 Pro usa temperaturas mais baixas, AMS-HT suporta temperaturas mais altas.",dryingFilament:"Filamento",printModal:"Modal de Impressão",expandCustomMapping:"Expandir mapeamento personalizado por padrão",expandCustomMappingDescription:"Ao imprimir em várias impressoras, mostrar o mapeamento AMS por impressora expandido",authentication:"Autenticação",authEnabledDescription:"Sua instância está protegida com autenticação de usuário",authDisabledDescription:"Ative para exigir login e gerenciar o acesso dos usuários",authDisabledMessage:"Ative a autenticação para criar contas de usuário, gerenciar permissões e proteger sua instância do Bambuddy.",enableAuthentication:"Ativar Autenticação",currentUser:"Usuário Atual",changePassword:"Alterar Senha",admin:"Administrador",users:"Usuários",addUser:"Adicionar Usuário",groups:"Grupos",addGroup:"Adicionar Grupo",system:"Sistema",noDescription:"Sem descrição",userCount:"{{count}} usuários",permissionCount:"{{count}} permissões",createUser:"Criar Usuário",username:"Nome de Usuário",enterUsername:"Digite o nome de usuário",password:"Senha",enterPassword:"Digite a senha (mínimo 6 caracteres)",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a senha",viewReleaseOnGitHub:"Ver lançamento no GitHub",turnAllPlugsOn:"Ligar todas as tomadas",turnAllPlugsOff:"Desligar todas as tomadas",clearNotificationLogs:"Limpar Logs de Notificação",clearLogsMessage:"Isso excluirá permanentemente todos os logs de notificação com mais de 30 dias. Esta ação não pode ser desfeita.",clearLogs:"Limpar Logs",resetUiPreferences:"Redefinir Preferências de UI",resetUiPreferencesMessage:"Isso redefinirá todas as preferências de UI para os padrões: ordem da barra lateral, tema, layout do painel, modos de exibição e preferências de classificação. Suas impressoras, arquivos e configurações do servidor NÃO serão afetados. A página será recarregada após a limpeza.",resetPreferences:"Redefinir Preferências",deleteGroupTitle:"Excluir Grupo",deleteGroupMessage:"Tem certeza de que deseja excluir este grupo? Usuários neste grupo perderão essas permissões.",deleteGroup:"Excluir Grupo",disableAuthenticationTitle:"Desativar Autenticação",disableAuthenticationMessage:"Tem certeza de que deseja desativar a autenticação? Isso tornará sua instância do Bambuddy acessível sem login. Todos os usuários permanecerão no banco de dados, mas a autenticação será desativada.",disableAuthentication:"Desativar Autenticação",configureBambuddy:"Configurar Bambuddy",systemDefault:"Padrão do Sistema",archiveSettings:"Configurações de Arquivo",newWindow:"Nova Janela",embeddedOverlay:"Sobreposição Incorporada",preferredSlicer:"Fatiador Preferido",preferredSlicerDescription:"Escolha qual aplicativo de fatiamento abrirá os arquivos",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"Câmeras Externas",costTracking:"Rastreamento de Custos",printsOnly:"Apenas Impressões",totalConsumption:"Consumo Total",dataManagement:"Gerenciamento de Dados",storageUsage:"Uso de Armazenamento",storageUsageDescription:"Detalhamento do uso de dados por categoria",storageUsageTotal:"Total",storageUsageErrors:"Erros",storageUsageOtherBreakdown:"Outros (inclui ativos estáticos, scripts e arquivos de configuração)",storageUsageSystem:"Sistema",storageUsageData:"Dados",storageUsageUnavailable:"Informações de uso de armazenamento indisponíveis",clearNotificationLogsDescription:"Excluir logs de notificação com mais de 30 dias",resetUiPreferencesDescription:"Redefinir ordem da barra lateral, tema, modos de exibição e preferências de layout. Impressoras, arquivos e configurações não são afetados.",enableHomeAssistant:"Ativar Home Assistant",enableMqtt:"Ativar MQTT",useTls:"Usar TLS",enableMetricsEndpoint:"Ativar Endpoint de Métricas",availableMetrics:"Métricas Disponíveis",editUser:"Editar Usuário",deleteUserTitle:"Excluir Usuário",groupName:"Nome do Grupo",leaveEmptyForAnonymous:"Deixe vazio para anônimo",leaveEmptyForNoAuth:"Deixe vazio para sem autenticação",enterNewPassword:"Digite a nova senha",confirmNewPassword:"Confirme a nova senha",enterGroupName:"Digite o nome do grupo",enterDescriptionOptional:"Digite a descrição (opcional)",enterCurrentPassword:"Digite a senha atual",enterNewPasswordMin6:"Digite a nova senha (mínimo 6 caracteres)",toast:{keyCopied:"Chave copiada para a área de transferência",copyFailed:"Falha ao copiar a chave",keyAddedToBrowser:"Chave adicionada ao Navegador de API",clearLogsFailed:"Falha ao limpar logs",uiPreferencesReset:"Preferências de UI redefinidas. Atualizando...",authDisabled:"Autenticação desativada com sucesso",authDisableFailed:"Falha ao desativar a autenticação",apiKeyCreated:"Chave de API criada",apiKeyDeleted:"Chave de API excluída",userCreated:"Usuário criado com sucesso",userUpdated:"Usuário atualizado com sucesso",userDeleted:"Usuário excluído com sucesso",groupCreated:"Grupo criado com sucesso",groupUpdated:"Grupo atualizado com sucesso",groupDeleted:"Grupo excluído com sucesso",fillRequiredFields:"Por favor, preencha todos os campos obrigatórios",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres",enterGroupName:"Por favor, insira um nome de grupo",settingsSaved:"Configurações salvas",noPermissionUpdate:"Você não tem permissão para alterar as configurações",cameraSettingsSaved:"Configurações da câmera salvas",enterCameraUrl:"Por favor, insira a URL da câmera",passwordChanged:"Senha alterada com sucesso",connectionFailed:"Falha na conexão",testFailed:"Falha no teste",cameraConnected:"Câmera conectada{{resolution}}"},testConnection:"Testar Conexão",catalog:{spoolCatalog:"Catálogo de Carretéis",spoolCatalogDescription:"Pesos de carretéis vazios por marca/tipo. Usado para pesquisa automática de peso ao adicionar carretéis.",searchCatalog:"Pesquisar no catálogo...",addNewEntry:"Adicionar Nova Entrada",namePlaceholder:"Nome (ex.: Bambu Lab - Plástico)",weight:"Peso",type:"Tipo",default:"Padrão",custom:"Personalizado",noMatch:"Nenhuma entrada corresponde à sua pesquisa",empty:"Nenhuma entrada no catálogo",deleteEntry:"Excluir Entrada",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',resetCatalog:"Redefinir Catálogo",resetConfirm:"Redefinir catálogo para os padrões? Isso removerá todas as entradas personalizadas.",loadFailed:"Falha ao carregar o catálogo de carretéis",nameWeightRequired:"Nome e peso são obrigatórios",entryAdded:"Entrada adicionada",addFailed:"Falha ao adicionar entrada",entryUpdated:"Entrada atualizada",updateFailed:"Falha ao atualizar entrada",entryDeleted:"Entrada excluída",deleteFailed:"Falha ao excluir entrada",resetSuccess:"Catálogo redefinido para os padrões",resetFailed:"Falha ao redefinir catálogo",exported:"Exportadas {{count}} entradas",imported:"Importadas {{added}} entradas ({{skipped}} ignoradas)",importFailed:"Falha ao importar: formato JSON inválido",exportTooltip:"Exportar catálogo para JSON",importTooltip:"Importar catálogo de JSON",resetTooltip:"Redefinir para os padrões",selectedCount:"{{count}} selecionados",deleteSelected:"Excluir Selecionados",bulkDeleteConfirm:"Tem certeza de que deseja excluir {{count}} entradas?",bulkDeleted:"{{count}} entradas excluídas",bulkDeleteFailed:"Falha ao excluir entradas"},colorCatalog:{title:"Catálogo de Cores",description:"Cores de filamento por fabricante/material. Usado para pesquisa automática de cores ao adicionar carretéis.",searchColors:"Pesquisar cores...",allManufacturers:"Todos os fabricantes",addNewColor:"Adicionar Nova Cor",manufacturer:"Fabricante",colorName:"Nome da Cor",hex:"Hex",materialOptional:"Material (opcional)",showing:"Mostrando {{filtered}} de {{total}} cores",noMatch:"Nenhuma cor corresponde à sua pesquisa",empty:"Nenhuma cor no catálogo",deleteColor:"Excluir Cor",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',resetCatalog:"Redefinir Catálogo de Cores",resetConfirm:"Redefinir catálogo para os padrões? Isso removerá todas as cores personalizadas.",sync:"Sincronizar",starting:"Iniciando...",syncTooltip:"Sincronizar do FilamentColors.xyz (2000+ cores, pode levar um minuto)",loadFailed:"Falha ao carregar o catálogo de cores",fieldsRequired:"Fabricante, nome da cor e cor hex são obrigatórios",colorAdded:"Cor adicionada",addFailed:"Falha ao adicionar cor",colorUpdated:"Cor atualizada",updateFailed:"Falha ao atualizar cor",colorDeleted:"Cor excluída",deleteFailed:"Falha ao excluir cor",resetSuccess:"Catálogo de cores redefinido para os padrões",resetFailed:"Falha ao redefinir catálogo",syncUpToDate:"Já está atualizado ({{count}} cores verificadas)",syncComplete:"Adicionadas {{added}} novas cores ({{skipped}} já existiam)",syncError:"Erro de sincronização",syncFailed:"Falha ao sincronizar do FilamentColors.xyz",exported:"Exportadas {{count}} cores",imported:"Importadas {{added}} cores ({{skipped}} ignoradas)",importFailed:"Falha ao importar: formato JSON inválido",selectedCount:"{{count}} selecionados",deleteSelected:"Excluir Selecionados",bulkDeleteConfirm:"Tem certeza de que deseja excluir {{count}} cores?",bulkDeleted:"{{count}} cores excluídas",bulkDeleteFailed:"Falha ao excluir cores"},dateFormat:"Formato de data",dateFormatUs:"US (MM/DD/AAAA)",dateFormatEu:"EU (DD/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-DD)",timeFormat:"Formato de hora",timeFormat12:"12 horas (3:30 PM)",timeFormat24:"24 horas (15:30)",defaultPrinter:"Impressora padrão",defaultPrinterDescription:"Pré-selecionar esta impressora para uploads, reimpressões e outras operações.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Arraste itens na barra lateral para reordenar. Restaurar ordem padrão aqui.",setDefault:"Definir padrão",sidebarOrderSetDefaultHint:"Definir padrão aplica a ordem atual do menu aos usuários que ainda não personalizaram o seu.",sidebarDefaultSet:"Ordem padrão do menu foi definida.",sidebarDefaultCleared:"Ordem padrão do menu removida.",sidebarDefaultFailed:"Falha ao definir a ordem padrão do menu.",reset:"Redefinir",darkMode:"Modo escuro",lightMode:"Modo claro",active:"(ativo)",background:"Fundo",accent:"Destaque",style:"Estilo",bgNeutral:"Neutro",bgWarm:"Quente",bgCool:"Frio",bgOled:"OLED Preto",bgSlate:"Azul ardósia",bgForest:"Verde floresta",accentGreen:"Verde",accentTeal:"Azul-petróleo",accentBlue:"Azul",accentOrange:"Laranja",accentPurple:"Roxo",accentRed:"Vermelho",styleClassic:"Clássico",styleGlow:"Brilhante",styleVibrant:"Vibrante",themeToggleHint:"Alternar entre modo escuro e claro usando o ícone de sol/lua na barra lateral.",autoArchivePrints:"Arquivar impressões automaticamente",autoArchiveDescription:"Salvar automaticamente arquivos 3MF quando impressões forem concluídas",saveThumbnailsDescription:"Extrair e salvar imagens de pré-visualização dos arquivos 3MF",captureFinishPhotoDescription:"Tirar foto da câmera da impressora quando a impressão for concluída",ffmpegNotInstalled:"ffmpeg não instalado",ffmpegRequired:"A captura de câmera requer ffmpeg. Instale via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).",camera:"Câmera",cameraViewMode:"Modo de visualização da câmera",cameraOverlayDescription:"A câmera abre em uma sobreposição redimensionável na tela principal",cameraWindowDescription:"A câmera abre em uma janela separada do navegador",externalCamerasDescription:"Configure câmeras externas para substituir a câmera integrada da impressora. Suporta streams MJPEG, RTSP, snapshots HTTP e câmeras USB (V4L2). Quando habilitada, a câmera externa é usada para visualização ao vivo e fotos de conclusão.",cameraPlaceholderUsb:"Caminho do dispositivo (/dev/video0)",cameraPlaceholderUrl:"URL da câmera (rtsp://... ou http://...)",cameraTypeMjpeg:"Stream MJPEG",cameraTypeRtsp:"Stream RTSP",cameraTypeSnapshot:"Snapshot HTTP",cameraTypeUsb:"Câmera USB (V4L2)",cameraRotation:"Rotação",test:"Testar",connected:"Conectado",disconnected:"Desconectado",currency:"Moeda",defaultFilamentCost:"Custo padrão do filamento (por kg)",electricityCost:"Custo da eletricidade por kWh",energyDisplayMode:"Modo de exibição de energia",energyModePrintDescription:"O painel mostra a soma da energia usada durante as impressões",energyModeTotalDescription:"O painel mostra a energia total dos plugues inteligentes",fileManager:"Gerenciador de arquivos",createArchiveEntry:"Criar entrada de arquivo ao imprimir",createArchiveEntryDescription:"Ao imprimir pelo gerenciador de arquivos, criar opcionalmente uma entrada de arquivo",lowDiskSpaceWarning:"Aviso de pouco espaço em disco",lowDiskSpaceDescription:"Mostrar aviso quando o espaço livre em disco ficar abaixo deste limite",printerFirmware:"Firmware da impressora",checkFirmwareDescription:"Verificar atualizações de firmware da Bambu Lab",bambuddySoftware:"Software Bambuddy",autoCheckDescription:"Verificar automaticamente novas versões ao iniciar",checkNow:"Verificar agora",updateAvailableVersion:"Atualização disponível: v{{version}}",releaseNotes:"Notas da versão",updateViaDocker:"Atualizar via Docker Compose:",installUpdate:"Instalar atualização",latestVersionRunning:"Você está usando a versão mais recente",failedToCheckUpdates:"Falha ao verificar atualizações: {{error}}",backupRestore:"Backup e Restauração",backupRestoreDescription:"Exportar/importar configurações e configurar backup do GitHub",goToBackup:"Ir para backup",externalUrl:"URL externa",externalUrlDescription:"A URL externa onde o Bambuddy está acessível. Usada para imagens de notificação e integrações externas.",bambuddyUrl:"URL do Bambuddy",externalUrlHint:"Inclua protocolo e porta (ex: http://192.168.1.100:8000)",ftpRetry:"Tentativa FTP",ftpRetryDescription:"Tentar novamente operações FTP quando o WiFi da impressora é instável. Aplica-se a downloads 3MF, uploads de impressão, downloads de timelapse e atualizações de firmware.",autoRetryDescription:"Tentar novamente automaticamente operações FTP que falharam",retryAttempts:"Tentativas de reenvio",retryDelay:"Atraso entre tentativas",connectionTimeout:"Tempo limite de conexão",time_one:"{{count}} vez",time_other:"{{count}} vezes",second_one:"{{count}} segundo",second_other:"{{count}} segundos",nSeconds:"{{count}} segundos",increaseForWeakWifi:"Aumente para impressoras com WiFi fraco",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Conecte ao Home Assistant para controlar plugues inteligentes via API REST do HA. Suporta entidades switch, light, input_boolean e script.",homeAssistantUrl:"URL do Home Assistant",longLivedAccessToken:"Token de acesso de longa duração",haTokenHint:"Crie um token no HA: Perfil → Tokens de acesso de longa duração → Criar token",connectionSuccessful:"Conexão bem-sucedida",connectionFailed:"Falha na conexão",haConnectionSuccess:"Conectado com sucesso ao Home Assistant.",haConnectionFailed:"Falha ao conectar ao Home Assistant.",mqttPublishing:"Publicação MQTT",mqttDescription:"Publique eventos do BamBuddy para um broker MQTT externo para integração com Node-RED, Home Assistant e outros sistemas de automação.",mqttEnableDescription:"Publicar eventos no broker MQTT externo",brokerHostname:"Hostname do broker",port:"Porta",usernameOptional:"Usuário (opcional)",passwordOptional:"Senha (opcional)",topicPrefix:"Prefixo do tópico",topicPrefixHint:"Os tópicos serão: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Métricas Prometheus",prometheusEndpointDescription:"Expor métricas da impressora em <code>/api/v1/metrics</code> para monitoramento Prometheus/Grafana.",bearerTokenOptional:"Token Bearer (opcional)",bearerTokenHint:"Se definido, as requisições devem incluir <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Status da conexão",metricsPrinterState:"Estado da impressora (idle/printing/etc)",metricsPrintProgress:"Progresso da impressão 0-100%",metricsBedTemp:"Temperatura da mesa",metricsNozzleTemp:"Temperatura do bico",metricsPrintsTotal:"Total de impressões por resultado",metricsMore:"...e mais (camadas, ventoinhas, fila, uso de filamento)",smartPlugsDescription:"Conecte plugues inteligentes (Tasmota ou Home Assistant) para automatizar o controle de energia e rastrear o consumo energético das suas impressoras.",allOn:"Ligar todos",allOff:"Desligar todos",addSmartPlug:"Adicionar plugue inteligente",energySummary:"Resumo de energia",currentPower:"Potência atual",plugsOnline:"{{reachable}}/{{total}} plugues online",today:"Hoje",yesterday:"Ontem",total:"Total",enablePlugsForSummary:"Habilite os plugues para ver o resumo de energia",addNotificationProvider:"Adicionar",systemBadge:"(Sistema)",creating:"Criando...",changing:"Alterando...",deleteUserAndItems:"Excluir usuário E seus itens",deleteUserKeepItems:"Excluir usuário, manter itens (ficarão sem dono)",ok:"OK",twoFa:{totpTitle:"App Autenticador (TOTP)",totpDesc:"Use um app como Google Authenticator, Aegis ou Authy.",emailOtpTitle:"OTP por e-mail",emailOtpDesc:"Envie um código único para {{email}} ao fazer login.",emailOtpNoEmail:"Adicione um endereço de e-mail à sua conta para ativar este método.",addEmailFirst:"Sua conta não tem endereço de e-mail. Peça a um administrador para adicionar um.",setupTotp:"Configurar App Autenticador",setupAuthApp:"Configurar App Autenticador",setupInstructions:"Escaneie o código QR com seu app autenticador e confirme com um código.",manualEntry:"Não consegue escanear? Digite este segredo manualmente:",scannedContinue:"Código escaneado — continuar",enterCodeToConfirm:"Digite o código de 6 dígitos do seu app autenticador para confirmar.",activate:"Ativar",disableTotp:"Desativar Autenticador",disableConfirmHint:"Digite um código TOTP válido ou um código de backup para desativar o autenticador.",totpDisabled:"App autenticador desativado.",emailOtpEnabled:"OTP por e-mail ativado.",emailOtpDisabled:"OTP por e-mail desativado.",smtpRequired:"Por favor, configure e teste as configurações SMTP primeiro.",invalidCode:"Código inválido. Por favor, tente novamente.",enableEmailOtp:"Ativar OTP por e-mail",disableEmailOtp:"Desativar OTP por e-mail",emailSetupEnterCode:"Um código de verificação foi enviado para o seu endereço de e-mail. Digite-o abaixo para confirmar que você possui esta caixa de entrada.",verifyAndEnable:"Verificar e Ativar",emailDisablePasswordHint:"Digite a senha da sua conta para confirmar a desativação do OTP por e-mail.",passwordPlaceholder:"Digite sua senha",backupCodesTitle:"Salve seus códigos de backup",backupCodesWarning:"Guarde estes códigos em lugar seguro. Cada código só pode ser usado uma vez.",backupCodesRemaining:"{{count}} códigos de backup restantes",savedCodes:"Códigos salvos",regenBackup:"Regenerar códigos de backup",regenBackupHint:"Digite seu código TOTP atual para gerar 10 novos códigos de backup.",newBackupCodes:"Novos códigos de backup",linkedAccounts:"Contas SSO vinculadas",linkedAccountsDesc:"Estes provedores de identidade externos estão vinculados à sua conta.",oidcUnlinked:"Conta desvinculada."},oidc:{title:"Provedores SSO / OIDC",desc:"Configure provedores OpenID Connect para login único.",addProvider:"Adicionar provedor",newProvider:"Novo provedor",empty:"Nenhum provedor OIDC configurado ainda.",created:"Provedor criado.",updated:"Provedor atualizado.",deleted:"Provedor excluído.",deleteTitle:"Excluir provedor",deleteMessage:'Excluir "{{name}}"? Todas as contas vinculadas serão desconectadas.',form:{name:"Nome de exibição",issuerUrl:"URL do emissor",clientId:"Client ID",clientSecret:"Client secret",scopes:"Escopos",iconUrl:"URL do ícone (opcional)",enabled:"Ativado",autoCreate:"Criar usuários automaticamente",autoCreateDesc:"Cria automaticamente uma conta local no primeiro login.",autoLink:"Vincular contas existentes automaticamente",autoLinkDesc:"Vincula contas locais existentes por e-mail no primeiro login.",secretHint:"deixe em branco para manter",secretPlaceholder:"novo segredo",emailClaim:"Claim de e-mail",emailClaimDesc:"Claim JWT usado como identidade de e-mail. Use 'preferred_username' ou 'upn' para Azure Entra ID (que não envia email_verified). Use apenas nomes de claim confiáveis.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"Exigir e-mail verificado",requireEmailVerifiedDesc:"Aceitar o claim de e-mail apenas quando o provedor o marcar como verificado.",requireEmailVerifiedWarning:"Aviso: o e-mail será aceito sem verificação. Use apenas com provedores confiáveis.",requireEmailVerifiedAutoLink:"Desabilite o vínculo automático primeiro para alterar esta configuração."}},spoolbuddy:{infoTitle:"Dispositivos SpoolBuddy",infoBody:"Os kiosks SpoolBuddy se registram automaticamente via heartbeat. Cancele o registro de um dispositivo aqui se não estiver mais em uso ou se um duplicado obsoleto foi deixado por uma falha do daemon.",duplicatesTitle:"{{count}} dispositivos registrados",duplicatesBody:"Apenas o primeiro dispositivo registrado é usado pela interface do kiosk. Se algum destes for um duplicado obsoleto após uma falha, cancele seu registro — um dispositivo online se registrará novamente no próximo heartbeat.",empty:"Nenhum dispositivo SpoolBuddy registrado ainda.",online:"Online",offline:"Offline",unregister:"Cancelar registro",unregisterSuccess:"Dispositivo removido",unregisterError:"Falha ao cancelar registro",confirmTitle:"Cancelar registro do dispositivo SpoolBuddy?",confirmBody:'Isso removerá "{{hostname}}" ({{deviceId}}) do banco de dados. Se o dispositivo estiver online, ele se registrará novamente no próximo heartbeat.',ipAddress:"Endereço IP",firmware:"Firmware",lastSeen:"Visto pela última vez",daemonUptime:"Tempo ativo do daemon",systemUptime:"Tempo ativo do sistema",never:"nunca",nfc:"NFC",scale:"Balança",cpuTemp:"Temp. CPU",memory:"Memória",disk:"Disco",update:"Atualizar",updateConfirmTitle:"Atualizar daemon do Spoolbuddy?",updateConfirmBody:'Iniciar uma atualização de software em "{{hostname}}"? O daemon será reiniciado após a aplicação.',restartBrowser:"Reiniciar navegador",restartBrowserConfirmTitle:"Reiniciar o navegador do kiosk?",restartBrowserConfirmBody:'Reiniciar o navegador do kiosk em "{{hostname}}"? A tela ficará em branco brevemente.',restartDaemon:"Reiniciar daemon",restartDaemonConfirmTitle:"Reiniciar daemon do Spoolbuddy?",restartDaemonConfirmBody:'Reiniciar o daemon do Spoolbuddy em "{{hostname}}"? O dispositivo ficará offline por alguns segundos.',reboot:"Reiniciar",rebootConfirmTitle:"Reiniciar o dispositivo?",rebootConfirmBody:'Reiniciar "{{hostname}}"? O dispositivo ficará offline por cerca de um minuto.',shutdown:"Desligar",shutdownConfirmTitle:"Desligar o dispositivo?",shutdownConfirmBody:'Desligar "{{hostname}}"? Será necessário acesso físico para ligá-lo novamente.',commandConfirm:"Confirmar",commandQueued:"Comando enfileirado",commandError:"Falha ao enviar comando"}},notification:{printStarted:{title:"Impressão Iniciada",body:"{{printer}}: {{filename}} iniciou a impressão"},printCompleted:{title:"Impressão Concluída",body:"{{printer}}: {{filename}} foi concluída com sucesso"},printFailed:{title:"Falha na Impressão",body:"{{printer}}: {{filename}} falhou"},printStopped:{title:"Impressão Interrompida",body:"{{printer}}: {{filename}} foi interrompida"},printProgress:{title:"Progresso da Impressão",body:"{{printer}}: {{filename}} está {{percent}}% concluída"},printerOffline:{title:"Impressora Offline",body:"{{printer}} está offline"},printerError:{title:"Erro na Impressora",body:"{{printer}}: {{error}}"},filamentLow:{title:"Filamento Baixo",body:"{{printer}}: O filamento está acabando"},maintenanceDue:{title:"Manutenção Pendente",body:"{{printer}}: {{items}} precisam de atenção"}},errors:{generic:"Algo deu errado",networkError:"Erro de rede. Por favor, verifique sua conexão.",notFound:"Não encontrado",unauthorized:"Não autorizado",serverError:"Erro no servidor",validationError:"Por favor, verifique sua entrada",printerConnectionFailed:"Falha ao conectar à impressora",saveFailed:"Falha ao salvar alterações",deleteFailed:"Falha ao excluir",loadFailed:"Falha ao carregar dados"},hmsErrors:{title:"Erros - {{name}}",noErrors:"Nenhum erro",viewOnWiki:"Ver no Bambu Lab Wiki",clearInstructions:"Limpe os erros na impressora para descartá-los aqui.",clearErrors:"Limpar Erros",clearSuccess:"Erros HMS limpos",clearFailed:"Falha ao limpar erros HMS"},mqttDebug:{title:"MQTT Log de Depuração",searchPlaceholder:"Pesquisar tópico ou payload...",noMessages:"Nenhuma mensagem registrada ainda",startLoggingHint:'Clique em "Iniciar Registro" para começar a capturar mensagens MQTT',noMessagesMatch:"Nenhuma mensagem corresponde ao seu filtro",adjustFilterHint:"Tente ajustar seus critérios de pesquisa ou filtro",incoming:"Entrada",outgoing:"Saída",loggingStopped:"Registro interrompido",loggingActive:"Registro ativo - as mensagens serão atualizadas automaticamente",startLogging:"Iniciar Registro",stopLogging:"Parar Registro",clearLog:"Limpar Registro",topic:"ópico",timestamp:"Carimbo de Data/Hora",direction:"Direção",all:"Todos"},printerFiles:{title:"Gerenciador de Arquivos",storageUsed:"Usado:",storageFree:"Livre:",filterPlaceholder:"Filtrar arquivos...",deleteButton:"Excluir",deleteFiles:"Excluir {{count}} arquivos",deleteFileConfirm:'Excluir "{{name}}"? Isso não pode ser desfeito.',deleteFilesConfirm:"Excluir {{count}} arquivos selecionados? Isso não pode ser desfeito.",noFiles:"Nenhum arquivo na impressora",loadingFiles:"Carregando arquivos...",failedToLoad:"Falha ao carregar arquivos",toast:{filesDeleted:"Arquivos excluídos: {{count}}",deleteFailed:"Falha ao excluir: {{error}}"}},confirm:{delete:"Tem certeza de que deseja excluir isso?",unsavedChanges:"Você tem alterações não salvas. Tem certeza de que deseja sair?",clearQueue:"Tem certeza de que deseja limpar a fila?"},login:{title:"Bambuddy Login",subtitle:"Faça login na sua conta",username:"Nome de usuário",usernamePlaceholder:"Digite seu nome de usuário",usernameOrEmail:"Nome de usuário ou Email",usernameOrEmailPlaceholder:"Nome de usuário ou Email",password:"Senha",passwordPlaceholder:"Digite sua senha",signIn:"Entrar",signingIn:"Entrando...",rememberMe:"Lembrar de mim",forgotPassword:"Esqueceu sua senha?",loginSuccess:"Login realizado com sucesso",loginFailed:"Falha no login",enterCredentials:"Por favor, insira nome de usuário e senha",enterEmail:"Por favor, insira seu endereço de e-mail",oidcLoginFailed:"Falha no login OIDC",oidcErrors:{providerError:"O provedor de identidade retornou um erro",missingParameters:"Parâmetros obrigatórios ausentes no callback OIDC",invalidState:"Estado OIDC inválido ou já utilizado",stateExpired:"Sessão OIDC expirada — tente novamente",providerNotFound:"Provedor OIDC não encontrado",discoveryFailed:"Falha ao obter o documento de descoberta OIDC",invalidDiscovery:"Documento de descoberta OIDC inválido",networkError:"Erro de rede durante a troca de token OIDC",badResponse:"Resposta inesperada durante a troca de token OIDC",noIdToken:"O provedor OIDC não retornou um token de ID",validationFailed:"Falha na validação do token OIDC",nonceMismatch:"Nonce OIDC não corresponde — possível ataque de replay",missingSubClaim:"Token OIDC sem claim sub",noLinkedAccount:"Nenhuma conta local vinculada a esta identidade OIDC",accountInactive:"Sua conta está inativa",userResolutionFailed:"Falha ao resolver sua conta",internalError:"Erro interno durante o login OIDC",tokenExchangeFailed:"Falha na troca de token OIDC"},forgotPasswordTitle:"Esqueceu a Senha",forgotPasswordMessage:"Se você esqueceu sua senha, entre em contato com o administrador do sistema para redefini-la.",forgotPasswordEmailMessage:"Digite seu endereço de email e enviaremos uma nova senha.",emailAddress:"Endereço de Email",emailPlaceholder:"seu.email@exemplo.com",cancel:"Cancelar",sending:"Enviando...",sendResetEmail:"Enviar Email de Redefinição",howToReset:"Como redefinir sua senha:",resetStep1:"Entre em contato com o administrador do Bambuddy",resetStep2:"Peça para redefinir sua senha na Gestão de Usuários",resetStep3:"Eles podem definir uma nova senha temporária para você",resetStep4:"Faça login com a nova senha e altere-a nas Configurações",gotIt:"Entendi",resetPassword:{title:"Definir nova senha",subtitle:"Digite e confirme sua nova senha abaixo.",newPassword:"Nova senha",newPasswordPlaceholder:"Pelo menos 8 caracteres",confirmPassword:"Confirmar senha",confirmPasswordPlaceholder:"Repetir nova senha",saving:"Salvando…",submit:"Definir nova senha",backToLogin:"Voltar para o login",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 8 caracteres",resetFailed:"Falha ao redefinir senha. O link pode ter expirado."},twoFA:{title:"Autenticação em dois fatores",subtitle:"Sua conta está protegida com 2FA. Insira o código de verificação abaixo.",methodAuthenticator:"Aplicativo autenticador",methodEmail:"Código por e-mail",methodBackup:"Código de recuperação",instructionsTotp:"Abra seu aplicativo autenticador e insira o código de 6 dígitos gerado para o Bambuddy.",instructionsEmail:"Um código de 6 dígitos foi enviado para o seu e-mail. Ele é válido por 10 minutos.",instructionsEmailNotSent:"Clique no botão abaixo para receber um código de verificação por e-mail.",instructionsBackup:"Insira um dos seus códigos de recuperação de 8 caracteres. Cada código só pode ser utilizado uma vez.",sendCodeButton:"Enviar código por e-mail",sendingCode:"Enviando...",resendCode:"Reenviar código",codeLabel:"Código de verificação",backupCodeLabel:"Código de recuperação",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verificar",verifyingButton:"Verificando...",backToLogin:"← Voltar para o login",orContinueWith:"ou entrar com",signInWith:"Entrar com {{provider}}",enterCode:"Por favor, insira o código de verificação",sendCodeFailed:"Falha ao enviar o código de verificação",invalidCode:"Código inválido. Por favor, tente novamente."}},setup:{title:"Bambuddy Configuração",subtitle:"Configure a autenticação para sua instância do Bambuddy",enableAuth:"Ativar Autenticação",adminAccount:"Conta de Administrador",adminAccountDesc:"Se usuários administradores já existirem, a autenticação será ativada usando as contas de administrador existentes. Deixe os campos abaixo vazios para usar os administradores existentes ou insira novas credenciais para criar um novo usuário administrador.",adminUsername:"Nome de usuário do administrador",adminPassword:"Senha do administrador",optionalIfAdminExists:"(opcional se usuários administradores existirem)",adminUsernamePlaceholder:"Digite o nome de usuário do administrador (opcional)",adminPasswordPlaceholder:"Digite a senha do administrador (opcional)",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a senha do administrador",settingUp:"Configurando...",completeSetup:"Concluir Configuração",toast:{authEnabledAdminCreated:"Autenticação ativada e usuário administrador criado",authEnabledExistingAdmins:"Autenticação ativada usando usuários administradores existentes",setupCompleted:"Configuração concluída",enterBothCredentials:"Por favor, insira o nome de usuário e a senha do administrador, ou deixe ambos vazios para usar os usuários administradores existentes",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres"}},changePassword:{title:"Alterar Senha",currentPassword:"Senha Atual",currentPasswordPlaceholder:"Digite a senha atual",newPassword:"Nova Senha",newPasswordPlaceholder:"Digite a nova senha (mínimo 6 caracteres)",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a nova senha",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres",changing:"Alterando...",success:"Senha alterada com sucesso",failed:"Falha ao alterar a senha"},plateAlert:{title:"Impressão Pausada!",message:"Objetos detectados na mesa de impressão. A impressão foi automaticamente pausada. Por favor, limpe a mesa e retome a impressão.",understand:"Entendi"},camera:{title:"Visualização da Câmera",invalidPrinterId:"ID da impressora inválido",live:"Ao Vivo",snapshot:"Captura",restartStream:"Reiniciar transmissão",refreshSnapshot:"Atualizar captura",fullscreen:"Tela Cheia",exitFullscreen:"Sair da Tela Cheia",connectingToCamera:"Conectando à câmera...",capturingSnapshot:"Capturando imagem...",connectionLost:"Conexão perdida",connectionFailed:"Falha na conexão com a câmera",reconnecting:"Reconectando em {{countdown}}s... (tentativa {{attempt}}/{{max}})",reconnectNow:"Reconectar agora",cameraUnavailable:"Câmera indisponível",cameraUnavailableDesc:"Certifique-se de que a impressora está ligada e conectada.",noCamera:"Nenhuma câmera disponível",retry:"Tentar novamente",cameraStream:"Transmissão da câmera",zoomOut:"Reduzir zoom",zoomIn:"Aumentar zoom",resetZoom:"Redefinir zoom",recording:"Gravando",startRecording:"Iniciar gravação",stopRecording:"Parar gravação",chamberLight:"Alternar luz da câmara"},groups:{title:"Gerenciamento de Grupos",subtitle:"Gerenciar grupos de permissão para controle de acesso",backToSettings:"Voltar para Configurações",createGroup:"Criar Grupo",noPermission:"Você não tem permissão para acessar esta página.",system:"Sistema",noDescription:"Sem descrição",usersCount:"{{count}} usuários",permissionsCount:"{{count}} permissões",edit:"Editar",delete:"Excluir",toast:{created:"Grupo criado com sucesso",updated:"Grupo atualizado com sucesso",deleted:"Grupo excluído com sucesso",enterGroupName:"Por favor, insira um nome para o grupo"},modal:{editGroup:"Editar Grupo",createGroup:"Criar Grupo",cancel:"Cancelar",saving:"Salvando...",creating:"Criando...",saveChanges:"Salvar Alterações"},form:{groupName:"Nome do Grupo",groupNamePlaceholder:"Insira o nome do grupo",systemGroupWarning:"Os nomes dos grupos do sistema não podem ser alterados",description:"Descrição",descriptionPlaceholder:"Insira a descrição (opcional)",permissions:"Permissões ({{count}} selecionadas)"},deleteModal:{title:"Excluir Grupo",message:"Tem certeza de que deseja excluir este grupo? Os usuários deste grupo perderão essas permissões.",confirm:"Excluir Grupo"},editor:{title:"Editar Grupo",createTitle:"Criar Grupo",search:"Pesquisar permissões...",selectAll:"Selecionar Tudo",clearAll:"Limpar Tudo",permissionsSelected:"{{count}} selecionada(s)",noResults:"Nenhuma permissão corresponde à sua pesquisa"}},users:{title:"Gerenciamento de Usuários",subtitle:"Gerenciar usuários e seu acesso à sua instância do Bambuddy",backToSettings:"Voltar para Configurações",createUser:"Criar Usuário",noPermission:"Você não tem permissão para acessar esta página.",admin:"Admin",noGroups:"Sem grupos",active:"Ativo",inactive:"Inativo",edit:"Editar",delete:"Excluir",system:"Sistema",noGroupsAvailable:"Nenhum grupo disponível",table:{username:"Nome de Usuário",groups:"Grupos",status:"Status",actions:"Ações"},toast:{created:"Usuário criado com sucesso",updated:"Usuário atualizado com sucesso",deleted:"Usuário excluído com sucesso",fillRequired:"Por favor, preencha todos os campos obrigatórios",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres"},modal:{createUser:"Criar Usuário",editUser:"Editar Usuário",cancel:"Cancelar",creating:"Criando...",saving:"Salvando...",saveChanges:"Salvar Alterações",advancedAuthSubtitle:"com Autenticação Avançada"},form:{username:"Nome de Usuário",usernamePlaceholder:"Insira o nome de usuário",email:"Email",emailPlaceholder:"user@example.com",password:"Senha",passwordPlaceholder:"Insira a senha",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a senha",newPasswordPlaceholder:"Insira a nova senha",confirmNewPasswordPlaceholder:"Confirme a nova senha",leaveBlankToKeep:"deixe em branco para manter a atual",groups:"Grupos",optional:"opcional",autoGeneratedPassword:"Uma senha segura será gerada automaticamente e enviada por e-mail ao usuário.",passwordManagedByAdvancedAuth:'A senha é gerenciada pela Autenticação Avançada. Use "Redefinir Senha" para enviar uma nova senha ao usuário por e-mail.',resetPassword:"Redefinir Senha",resettingPassword:"Redefinindo Senha..."},deleteModal:{title:"Excluir Usuário",message:"Tem certeza de que deseja excluir este usuário? Esta ação não pode ser desfeita.",confirm:"Excluir Usuário"}},streamOverlay:{title:"Stream Overlay",invalidPrinterId:"ID da impressora inválido",cameraStream:"Transmissão da câmera",progress:"Progresso da impressão",eta:"ETA",printerIdle:"Impressora ociosa",printerOffline:"Impressora offline",status:{printing:"Imprimindo",paused:"Pausado",finished:"Concluído",failed:"Falhou",idle:"Ocioso",unknown:"Desconhecido"}},profiles:{title:"Perfis",subtitle:"Gerencie seus presets de fatiador e calibrações de avanço de pressão",tabs:{cloud:"Perfis na Nuvem",local:"Perfis Locais",kprofiles:"K-Perfis"},localProfiles:{title:"Perfis Locais",subtitle:"Importe e gerencie presets de fatiador do OrcaSlicer",import:"Importar Perfis",importDesc:"Solte arquivos .bbscfg, .bbsflmt, .orca_filament, .zip ou .json aqui",importing:"Importando...",search:"Pesquisar presets locais...",noPresets:"Nenhum preset local ainda",badge:"Local",edit:"Editar",delete:"Excluir",cancel:"Cancelar",deleteConfirmTitle:"Excluir Preset",deleteConfirm:"Tem certeza de que deseja excluir este preset? Esta ação não pode ser desfeita.",source:"Fonte",inheritsFrom:"Herdado de",filamentType:"Tipo",vendor:"Fornecedor",compatiblePrinters:"Impressoras Compatíveis",nozzleTemp:"Temperatura do Bico",cost:"Custo",density:"Densidade",pressureAdvance:"Avanço de Pressão",filament:"Filamento",process:"Processo",printer:"Impressora",toast:{importSuccess:"{{count}} preset(s) importada(s)",importSkipped:"{{count}} preset(s) ignorada(s) (duplicadas)",importError:"{{count}} erro(s) durante a importação",deleted:"Preset excluído",updated:"Preset atualizado"}},connectedAs:"Conectado como",logout:"Sair",noLogoutPermission:"Você não tem permissão para sair",failedToLoad:"Falha ao carregar perfis",retry:"Tentar novamente",time:{justNow:"Agora mesmo",minsAgo:"há {{count}} minutos",hoursAgo:"há {{count}} horas",daysAgo:"há {{count}} dias"},toast:{loggedOut:"Desconectado"},login:{title:"Conectar ao Bambu Cloud",subtitle:"Sincronize seus presets de fatiador entre dispositivos",email:"Email",password:"Senha",region:"Região",regionGlobal:"Global",regionChina:"China",verificationCode:"Código de Verificação",totpCode:"Código do Autenticador",checkEmail:"Verifique seu email ({{email}}) para um código de 6 dígitos",enterTotpHint:"Digite o código de 6 dígitos do seu aplicativo autenticador",accessToken:"Token de Acesso",accessTokenHint:"Cole seu token de acesso Bambu Lab (do Bambu Studio)",back:"Voltar",loginButton:"Entrar",verifyButton:"Verificar",setTokenButton:"Definir Token",useToken:"Usar token de acesso em vez disso",useEmail:"Entrar com email em vez disso",toast:{loggedIn:"Conectado com sucesso",codeSent:"Código de verificação enviado para seu email",enterTotp:"Digite o código do seu aplicativo autenticador",tokenSet:"Token definido com sucesso"}},presets:{myPreset:"Meu preset (editável)",duplicate:"Duplicar",editable:"Editável",failedToLoadDetails:"Falha ao carregar detalhes do preset",deleteConfirm:"Excluir este preset?",deleteWarning:'Isso excluirá permanentemente "{{name}}" do Bambu Cloud. Esta ação não pode ser desfeita.',noDuplicatePermission:"Você não tem permissão para duplicar presets",noEditPermission:"Você não tem permissão para editar presets",noDeletePermission:"Você não tem permissão para excluir presets",types:{filament:"Preset de filamento",printer:"Preset de impressora",process:"Preset de processo"},toast:{deleted:"Preset excluído",created:"Preset criado",updated:"Preset atualizado",duplicated:"Preset duplicado",fieldAdded:'Campo "{{key}}" adicionado',exported:"Preset exportado"},baseLabel:"Base: {{name}}",currentLabel:"Atual: {{name}}",newPreset:"Novo Preset",editPreset:"Editar Preset",duplicatePreset:"Duplicar Preset",createNewPreset:"Criar Novo Preset",customizeSettings:"Personalizar configurações para seu novo preset",compareWithBase:"Comparar com o preset base",compare:"Comparar",basePreset:"Preset Base",selectBasePreset:"Selecionar preset base...",presetName:"Nome do Preset",myCustomPreset:"Meu preset personalizado",inheritsFrom:"Herdado de",dropJsonToImport:"Solte o arquivo JSON para importar",tabs:{common:"Comum",allFields:"Todos os Campos"},availableFields:"Campos Disponíveis",searchFieldsPlaceholder:"Pesquisar campos...",noMatchingFields:"Nenhum campo correspondente",allFieldsAdded:"Todos os campos adicionados",addCustomField:"Adicionar campo personalizado",yourOverrides:"Suas Substituições",noOverridesYet:"Nenhuma substituição ainda",clickFieldsToAdd:"Clique nos campos à esquerda para adicioná-los",saveAsTemplate:"Salvar como modelo",jsonTip:"Dica: Arraste e solte um arquivo .json em qualquer lugar deste modal para importar configurações"},cloudView:{searchPlaceholder:"Pesquisar presets...",templates:"Modelos",refresh:"Atualizar",newPreset:"Novo Preset",clearFilters:"Limpar filtros",compareMode:"Modo de Comparação",selectAnotherPreset:"Selecionar outro preset {{type}}",clickTwoPresets:"Clique em dois presets do mesmo tipo para comparar",selectFirst:"1. Selecionar primeiro",selectSecond:"2. Selecionar segundo",compareNow:"Comparar Agora",lastSynced:"Última sincronização:",showingCount:"Mostrando {{showing}} de {{total}} presets",noPresetsFound:"Nenhum preset encontrado",columns:{filament:"Filamento",process:"Processo",printer:"Impressora"},noFilamentPresets:"Nenhum preset de filamento",noProcessPresets:"Nenhum preset de processo",noPrinterPresets:"Nenhum preset de impressora",filters:{type:"Tipo",owner:"Proprietário",printer:"Impressora",nozzle:"Bico",filament:"Filamento",layer:"Camada",all:"Todos",myPresets:"Meus Presets",builtIn:"Integrado",process:"Processo"},noTemplatesPermission:"Você não tem permissão para gerenciar modelos",noRefreshPermission:"Você não tem permissão para atualizar perfis",noCreatePermission:"Você não tem permissão para criar presets"},templates:{title:"Modelos Rápidos",noTemplates:"Nenhum modelo ainda",createFirst:"Crie modelos a partir do editor de presets",typeFilter:"Tipo:",deleteTitle:"Excluir Modelo",deleteWarning:"Esta ação não pode ser desfeita",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',namePlaceholder:"Nome do modelo",descriptionPlaceholder:"Descrição",settingsJson:"Configurações (JSON)",fieldsCount:"{{count}} campos",shownInModals:"Exibido em modais",hiddenInModals:"Oculto em modais",apply:"Aplicar",toast:{deleted:"Modelo excluído",updated:"Modelo atualizado",created:"Modelo criado",applied:"Modelo aplicado"}}},support:{debugLoggingActive:"Registro de depuração ativo",manageLogs:"Gerenciar",collectItem7:"Conectividade da impressora e versões de firmware",collectItem8:"Status de integração (Spoolman, MQTT, HA)",collectItem9:"Interfaces de rede (somente sub-redes)",collectItem10:"Versões de pacotes Python",collectItem11:"Verificações de integridade do banco de dados",collectItem12:"Detalhes do ambiente Docker"},fileManager:{title:"Gerenciador de Arquivos",subtitle:"Organize e gerencie seus arquivos de impressão",uploadFiles:"Enviar Arquivos",newFolder:"Nova Pasta",folderName:"Nome da Pasta",folderNamePlaceholder:"ex.: Peças Funcionais",renameFile:"Renomear Arquivo",renameFolder:"Renomear Pasta",moveFiles:"Mover {{count}} Arquivo(s)",rootNoFolder:"Raiz (Sem Pasta)",current:"Atual",linkFolder:"Vincular Pasta",linkFolderDescription:'Vincular "{{name}}" a um projeto ou arquivo para acesso rápido.',project:"Projeto",archive:"Arquivo",noProjectsFound:"Nenhum projeto encontrado",noArchivesFound:"Nenhum arquivo encontrado",unlink:"Desvincular",link:"Vincular",dragDropFiles:"Arraste e solte os arquivos aqui",dropFilesHere:"Solte os arquivos aqui",orClickToBrowse:"ou clique para procurar",allFileTypesSupported:"Todos os tipos de arquivos são suportados. Arquivos ZIP serão extraídos.",zipFilesDetected:"Arquivos ZIP detectados",zipExtractOptions:"Arquivos ZIP serão extraídos. Escolha como lidar com a estrutura de pastas:",preserveZipStructure:"Preservar estrutura de pastas do ZIP",createFolderFromZip:"Criar pasta a partir do nome do arquivo ZIP",stlThumbnailGeneration:"Geração de miniaturas STL",zipMayContainStl:"Arquivos ZIP podem conter arquivos STL. Miniaturas podem ser geradas durante a extração.",thumbnailsCanBeGenerated:"Miniaturas podem ser geradas para arquivos STL. Modelos grandes podem levar mais tempo para processar.",generateThumbnailsForStl:"Gerar miniaturas para arquivos STL",threemfDetected:"Arquivos 3MF detectados",threemfExtractionInfo:"Modelo da impressora, material, cor e configurações de impressão serão extraídos automaticamente dos arquivos 3MF.",willBeExtracted:"Será extraído",filesExtracted:"{{count}} arquivos extraídos",uploadComplete:"Upload concluído: {{succeeded}} bem-sucedidos",uploadFailed:"Falha no envio",zipFilesFailed:"{{count}} arquivos falharam",uploading:"Enviando...",changeLink:"Alterar link...",linkTo:"Vincular a...",linkToProjectOrArchive:"Vincular a projeto ou arquivo",addToQueue:"Adicionar à fila",schedulePrint:"Agendar impressão",generateThumbnail:"Gerar miniatura",generateThumbnails:"Gerar miniaturas",generateThumbnailsForMissing:"Gerar miniaturas para arquivos STL que não possuem",gridView:"Visualização em grade",listView:"Visualização em lista",lowDiskSpaceWarning:"Aviso de pouco espaço em disco",lowDiskSpaceDetails:"Apenas {{free}} livres de {{total}} no total. O limite está definido para {{threshold}} GB nas configurações.",files:"Arquivos",folders:"Pastas",size:"Tamanho",free:"Livre",allFiles:"Todos os arquivos",wrap:"Quebrar texto",enableTextWrapping:"Ativar quebra de texto",disableTextWrapping:"Desativar quebra de texto",collapse:"Recolher",collapseFoldersByDefault:"Recolher pastas por padrão",expandFoldersByDefault:"Expandir pastas por padrão",dragToResizeTooltip:"Arraste para redimensionar, clique duas vezes para redefinir",searchFiles:"Pesquisar arquivos...",allTypes:"Todos os tipos",prints:"Impressões",ascending:"Crescente",descending:"Decrescente",resultsCount:"{{showing}} de {{total}} arquivos",selectAll:"Selecionar tudo",deselectAll:"Desmarcar tudo",selected:"{{count}} selecionado(s)",adding:"Adicionando...",loadingFiles:"Carregando arquivos...",folderIsEmpty:"A pasta está vazia",noFilesYet:"Nenhum arquivo ainda",folderEmptyDescription:"Envie arquivos ou mova arquivos para esta pasta para começar.",noFilesDescription:"Envie arquivos para começar a organizar seus arquivos relacionados à impressão.",noMatchingFiles:"Nenhum arquivo correspondente",noMatchingFilesDescription:"Nenhum arquivo corresponde aos seus critérios de pesquisa ou filtro.",clearFilters:"Limpar filtros",printedCount:"Impresso {{count}}x",uploadedBy:"Enviado por",deleteFolder:"Excluir pasta",deleteFile:"Excluir arquivo",deleteFilesCount:"Excluir {{count}} arquivos",deleteFolderConfirm:"Tem certeza de que deseja excluir esta pasta? Todos os arquivos dentro também serão excluídos.",deleteFileConfirm:"Tem certeza de que deseja excluir este arquivo?",deleteFilesConfirm:"Tem certeza de que deseja excluir {{count}} arquivos selecionados? Esta ação não pode ser desfeita.",deleting:"Excluindo...",noPermissionRenameFolder:"Você não tem permissão para renomear pastas",noPermissionLinkFolder:"Você não tem permissão para vincular pastas",noPermissionDeleteFolder:"Você não tem permissão para excluir pastas",noPermissionPrint:"Você não tem permissão para imprimir",noPermissionSlice:"You do not have permission to slice files",noPermissionAddToQueue:"Você não tem permissão para adicionar à fila",noPermissionDownload:"Você não tem permissão para baixar arquivos",noPermissionRenameFile:"Você não tem permissão para renomear este arquivo",noPermissionGenerateThumbnail:"Você não tem permissão para gerar miniaturas",noPermissionDeleteFile:"Você não tem permissão para excluir este arquivo",noPermissionCreateFolder:"Você não tem permissão para criar pastas",noPermissionUpload:"Você não tem permissão para enviar arquivos",noPermissionMoveFiles:"Você não tem permissão para mover arquivos",noPermissionDeleteFiles:"Você não tem permissão para excluir arquivos",linkExternal:"Vincular externo",linkExternalFolder:"Vincular pasta externa",linkExternalFolderDescription:"Montar um diretório do host (NAS, USB, compartilhamento de rede) no Gerenciador de Arquivos. Os arquivos não são copiados — são acessados diretamente do caminho original.",externalFolderNamePlaceholder:"ex. Impressões NAS",externalPath:"Caminho do host",externalPathHelp:"Caminho absoluto do diretório no host Docker. Deve estar montado como bind no contêiner.",readOnly:"Somente leitura",readOnlyHelp:"impede uploads e exclusões",showHiddenFiles:"Mostrar arquivos ocultos (arquivos ponto)",externalFolder:"Pasta externa",scanFolder:"Escanear",toast:{folderCreated:"Pasta criada",folderDeleted:"Pasta excluída",fileDeleted:"Arquivo excluído",filesDeleted:"Excluídos {{count}} arquivos",filesMoved:"Arquivos movidos",folderLinked:"Pasta vinculada",folderUnlinked:"Pasta desvinculada",externalFolderLinked:"Pasta externa vinculada e escaneada",folderScanned:"Escaneamento concluído: {{added}} adicionados, {{removed}} removidos",addedToQueue:"Adicionado {{count}} arquivo(s) à fila",addedToQueuePartial:"Adicionado {{added}} arquivo(s), {{failed}} falharam",failedToAddToQueue:"Falha ao adicionar arquivos: {{error}}",fileRenamed:"Arquivo renomeado",folderRenamed:"Pasta renomeada",thumbnailsGenerated:"Geradas {{count}} miniatura(s)",thumbnailsGeneratedPartial:"Geradas {{succeeded}} miniatura(s), {{failed}} falharam",noStlMissingThumbnails:"Nenhum arquivo STL sem miniatura",failedToGenerateThumbnails:"Falha ao gerar miniaturas: {{error}}",thumbnailGenerated:"Miniatura gerada",failedToGenerateThumbnail:"Falha ao gerar miniatura: {{error}}"}},projects:{title:"Projetos",subtitle:"Organize e acompanhe seus projetos de impressão 3D",newProject:"Novo Projeto",editProject:"Editar Projeto",deleteProject:"Excluir Projeto",projectName:"Nome do Projeto",description:"Descrição",noProjects:"Nenhum projeto ainda",noProjectsFiltered:"Nenhum projeto {{status}}",noProjectsFilteredHelp:"Você não tem nenhum projeto {{status}}. Os projetos aparecerão aqui quando seu status mudar.",createFirst:"Crie seu primeiro projeto para começar a organizar impressões relacionadas, acompanhar o progresso e gerenciar suas construções.",createFirstButton:"Crie Seu Primeiro Projeto",create:"Criar",files:"Arquivos",prints:"Impressões",plates:"Placas",parts:"Peças",lastModified:"Última Modificação",deleteConfirm:"Tem certeza de que deseja excluir este projeto? Arquivos e itens da fila serão desvinculados, mas não excluídos.",addFiles:"Adicionar Arquivos",removeFile:"Remover Arquivo",viewDetails:"Ver Detalhes",namePlaceholder:"ex., Voron 2.4 Build",descriptionPlaceholder:"Descrição opcional...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"A URL deve começar com http:// ou https://",openExternalUrl:"Abrir URL do projeto",coverImageLabel:"Imagem de capa",coverImageAlt:"Imagem de capa do projeto",coverImageUpload:"Enviar",coverImageReplace:"Substituir",coverImageRemove:"Remover",color:"Cor",targetPlates:"Placas Alvo",targetPlatesPlaceholder:"ex., 25",targetPlatesHelp:"Número de trabalhos de impressão",targetParts:"Peças Alvo",targetPartsPlaceholder:"ex., 150",targetPartsHelp:"Total de objetos necessários",tagsLabel:"Tags (separadas por vírgula)",tagsPlaceholder:"ex., voron, funcional, presente",dueDate:"Data de Vencimento",priority:"Prioridade",priorityLow:"Baixa",priorityNormal:"Normal",priorityHigh:"Alta",priorityUrgent:"Urgente",statusActive:"Ativo",statusCompleted:"Concluído",statusArchived:"Arquivado",done:"Concluído",completed:"Concluído",failed:"Falhou",inQueue:"Na fila",noPrintsYet:"Nenhuma impressão ainda",printJobs:"Trabalhos de impressão (placas)",partsPrinted:"Peças impressas",failedParts:"Peças falhadas",import:"Importar",export:"Exportar",importProject:"Importar projeto",exportAll:"Exportar todos os projetos",loading:"Carregando projetos...",noEditPermission:"Você não tem permissão para editar projetos",noDeletePermission:"Você não tem permissão para excluir projetos",noCreatePermission:"Você não tem permissão para criar projetos",noImportPermission:"Você não tem permissão para importar projetos",noExportPermission:"Você não tem permissão para exportar projetos",toast:{created:"Projeto criado",updated:"Projeto atualizado",deleted:"Projeto excluído",imported:"Projeto importado",multipleImported:"{{count}} projetos importados",importFailed:"Falha na importação",exported:"Projetos exportados (apenas metadados)"}},projectDetail:{notFound:"Projeto não encontrado",backToProjects:"Voltar para Projetos",export:"Exportar",exportProject:"Exportar projeto",noExportPermission:"Você não tem permissão para exportar projetos",noEditPermission:"Você não tem permissão para editar projetos",partOf:"Parte de:",priorityLabel:"Prioridade:",noPrints:"Nenhuma impressão neste projeto ainda",status:{active:"Ativo",completed:"Concluído",archived:"Arquivado"},priority:{low:"Baixa",normal:"Normal",high:"Alta",urgent:"Urgente"},dueDate:{overdue:"Atrasado",today:"Vence hoje",daysLeft:"{{count}} dias restantes"},progress:{platesProgress:"Progresso das Placas",partsProgress:"Progresso das Peças",printJobs:"Trabalhos de Impressão",parts:"Peças",percentComplete:"{{percent}}% concluído",remaining:"{{count}} restantes"},stats:{printJobs:"Trabalhos de Impressão",total:"total",failed:"{{count}} falhou",partsPrinted:"{{count}} peças impressas",printTime:"Tempo de Impressão",filamentUsed:"Filamento Usado"},cost:{title:"Rastreamento de Custos",filamentCost:"Custo do Filamento",energy:"Energia",totalCost:"Custo Total",total:"Total",includesBom:"incl. lista de materiais",budget:"Orçamento",remaining:"Restante"},subProjects:{title:"Sub-projetos ({{count}})"},notes:{title:"Notas",noEditPermission:"Você não tem permissão para editar notas",placeholder:"Adicione notas sobre este projeto...",empty:"Nenhuma nota ainda. Clique em Editar para adicionar notas."},files:{title:"Arquivos",linkFolders:"Vincular pastas do Gerenciador de Arquivos",forQuickAccess:"a este projeto para acesso rápido.",fileCount:"{{count}} arquivo(s)",empty:"Nenhuma pasta vinculada. Vá para o Gerenciador de Arquivos e vincule uma pasta a este projeto.",noFiles:"Nenhum arquivo nesta pasta.",print:"Imprimir agora",addToQueue:"Adicionar à fila"},bom:{title:"Lista de Materiais",acquired:"{{completed}}/{{total}} adquiridos",showAll:"Mostrar todos",hideDone:"Ocultar concluídos",addPart:"Adicionar Peça",noAddPermission:"Você não tem permissão para adicionar peças",partNamePlaceholder:"Nome da peça (ex.: parafusos M3x8)",partName:"Nome da peça",qty:"Quantidade",price:"Preço ({{currency}})",sourcingUrlPlaceholder:"URL de fornecimento (opcional)",remarksPlaceholder:"Observações (opcional)",deletePart:"Excluir Peça",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',noUpdatePermission:"Você não tem permissão para atualizar peças",noEditPermission:"Você não tem permissão para editar peças",noDeletePermission:"Você não tem permissão para excluir peças",totalCost:"Custo total:",empty:"Nenhuma peça na lista de materiais. Adicione hardware, eletrônicos ou outros componentes para rastrear o que precisa ser adquirido."},timeline:{title:"Linha do Tempo de Atividades",empty:"Nenhuma atividade ainda."},template:{saveAsTemplate:"Salvar como Modelo",noCreatePermission:"Você não tem permissão para criar modelos"},queue:{title:"Fila",viewAll:"Ver todos",printing:"{{count}} imprimindo",queued:"{{count}} na fila"},prints:{title:"Impressões ({{count}})"},toast:{projectUpdated:"Projeto atualizado",partAdded:"Peça adicionada",partRemoved:"Peça removida",exportFailed:"Falha na exportação",projectExported:"Projeto exportado",templateCreated:"Modelo criado"}},system:{title:"Informações do Sistema",version:"Versão",uptime:"Tempo de Atividade",cpuUsage:"Uso da CPU",memoryUsage:"Uso da Memória",diskUsage:"Uso do Disco",networkInfo:"Informações de Rede",logs:"Logs",debugMode:"Modo de Depuração",enableDebug:"Ativar Registro de Depuração",disableDebug:"Desativar Registro de Depuração",downloadLogs:"Baixar Logs",clearLogs:"Limpar Logs",dockerInfo:"Informações do Docker",containerName:"Nome do Contêiner",imageName:"Nome da Imagem",platform:"Plataforma",architecture:"Arquitetura"},library:{title:"Biblioteca de Filamentos",addFilament:"Adicionar Filamento",editFilament:"Editar Filamento",deleteFilament:"Excluir Filamento",vendor:"Fornecedor",material:"Material",color:"Cor",kFactor:"Fator K",temperature:"Temperatura",noFilaments:"Nenhum filamento na biblioteca",deleteConfirm:"Tem certeza de que deseja excluir este filamento?",importFromPrinter:"Importar da Impressora",exportToFile:"Exportar para Arquivo"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Integração com Spoolman",enabled:"Spoolman Ativado",url:"URL do Spoolman",connected:"Conectado",disconnected:"Não Conectado",testConnection:"Testar Conexão",sync:"Sincronizar",syncing:"Sincronizando...",lastSync:"Última Sincronização",linkToSpoolman:"Vincular ao Spoolman",openInSpoolman:"Abrir no Spoolman",unlinkSpool:"Desvincular Carretel",unlinkConfirmTitle:"Desvincular carretel?",unlinkConfirmMessage:"Isso desconectará o carretel do Spoolman. Os dados do carretel no Spoolman permanecerão inalterados.",selectSpool:"Selecionar Carretel",noUnlinkedSpools:"Nenhum carretel desvinculado disponível",linkSuccess:"Carretel vinculado ao Spoolman com sucesso",linkFailed:"Falha ao vincular carretel",unlinkSuccess:"Carretel desvinculado do Spoolman com sucesso",unlinkFailed:"Falha ao desvincular carretel",spoolId:"Carretel ID (Spool ID)",fillSourceLabel:"(Spoolman)",weight:"Peso",remaining:"Restante",disableWeightSync:"Desativar Sincronização de Peso Estimado do AMS",disableWeightSyncDesc:"Não atualize a capacidade restante a partir das estimativas do AMS. Use isso se preferir o rastreamento de uso do Spoolman em vez das estimativas baseadas em porcentagem do AMS. Novos carretéis ainda usarão a estimativa do AMS como seu peso inicial.",reportPartialUsage:"Relatar Uso Parcial para Impressões Falhadas",reportPartialUsageDesc:"Quando uma impressão falha ou é cancelada, relate o filamento estimado usado até aquele ponto com base no progresso das camadas."},inventory:{title:"Inventário de Carretéis",spoolmanMixedContentTitle:"Spoolman não pode carregar em HTTPS — conteúdo misto bloqueado pelo navegador",spoolmanMixedContentBody:"O Bambuddy é servido via HTTPS (pelo seu reverse proxy), mas a URL do Spoolman ainda é HTTP. Os navegadores bloqueiam conteúdo misto por segurança, então a interface embutida do Spoolman não consegue carregar. O Spoolman também precisa estar acessível via HTTPS.",spoolmanMixedContentFixReverseProxy:"Coloque o Spoolman atrás do mesmo reverse proxy do Bambuddy (Traefik / Nginx / Caddy) com HTTPS e atualize a URL do Spoolman em Configurações com o novo endereço HTTPS.",spoolmanMixedContentFixOpenNewTab:"Como alternativa, abra o Spoolman em uma nova aba via HTTP — as regras de conteúdo misto só se aplicam a frames embutidos, uma aba independente funciona normalmente.",spoolmanOpenInNewTab:"Abrir Spoolman em nova aba",addSpool:"Adicionar Carretel",editSpool:"Editar Carretel",material:"Material",selectMaterial:"Selecionar material...",subtype:"Subtipo",brand:"Marca",searchBrand:"Pesquisar marca...",useCustomBrand:'Usar "{{brand}}"',useCustomMaterial:"Usar material personalizado: {{material}}",colorName:"Nome da Cor",colorNamePlaceholder:"Jade White, Fire Red...",color:"Cor",hexColor:"Cor Hexadecimal",pickColor:"Escolher cor personalizada",labelWeight:"Peso da Etiqueta",coreWeight:"Peso do Carretel Vazio",searchSpoolWeight:"Pesquisar peso do carretel...",weightUsed:"Usado",currentWeight:"Peso Restante",measuredWeight:"Peso Medido",spoolName:"Bobina",costPerKg:"Custo por kg",measuredWeightError:"O peso medido deve estar entre {{min}}g e {{max}}g.",slicerFilament:"Filamento do Fatiador",slicerFilamentName:"Nome do Predefinido do Fatiador",slicerPreset:"Predefinido do Fatiador",searchPresets:"Pesquisar predefinições de filamento...",selectedPreset:"Selecionado",noPresetsFound:"Nenhuma predefinição encontrada",tempOverrides:"Substituições de Temperatura",note:"Nota",notePlaceholder:"Quaisquer notas adicionais sobre este spool...",category:"Categoria",categoryPlaceholder:"ex. Produção, Protótipo, Cliente A",categoryNone:"Sem categoria",lowStockThresholdOverride:"Limite de estoque baixo (este carretel)",lowStockThresholdOverrideHelp:"Deixe em branco para usar o limite global ({{global}}%).",clearRfid:"Limpar tag RFID",rfidCleared:"Tag RFID limpa",archive:"Arquivar",restore:"Restaurar",noSpools:"Nenhum carretel ainda. Adicione seu primeiro carretel para começar.",noAvailableSpools:"Nenhum carretel disponível. Adicione um carretel ao seu inventário ou desatribua um de outro slot primeiro.",kProfiles:"K-Perfis",addKProfile:"Adicionar K-Perfil",assignSpool:"Atribuir Carretel",unassignSpool:"Desatribuir",assignSuccess:"Carretel atribuído e slot AMS configurado",assignFailed:"Falha ao atribuir carretel",selectSpool:"Selecione um carretel para atribuir a este slot",assigned:"Atribuído",assigning:"Atribuindo...",searchSpools:"Pesquisar carretéis...",showAllSpools:"Mostrar todos os carretéis",allMaterials:"Todos os Materiais",filterByBrand:"Filtrar por marca...",showArchived:"Mostrar arquivados",quickAdd:"Adição rápida (Estoque)",quantity:"Quantidade",stock:"Estoque",configured:"Configurado",spoolsCreated:"{{count}} carretéis criados",spoolCreated:"Carretel criado",spoolUpdated:"Carretel atualizado",spoolDeleted:"Carretel excluído",spoolArchived:"Carretel arquivado",spoolRestored:"Carretel restaurado",deleteConfirm:"Tem certeza de que deseja excluir este carretel? Esta ação não pode ser desfeita.",archiveConfirm:"Tem certeza de que deseja arquivar este carretel?",advancedSettings:"Configurações Avançadas",filamentInfoTab:"Informações do Filamento",paProfileTab:"Perfil PA",filamentInfo:"Filamento",additional:"Adicional",loadingPresets:"Carregando predefinições da nuvem...",cloudConnected:"Nuvem conectada",cloudNotConnected:"Nuvem não conectada (usando padrões)",recentColors:"Recentes",searchColors:"Pesquisar cores...",searchResults:"Resultados da pesquisa",allColors:"Todas as cores",commonColors:"Cores comuns",showLess:"Mostrar menos",showAll:"Mostrar tudo",noColorsFound:"Nenhuma cor corresponde à sua pesquisa",noResults:"Nenhum resultado encontrado",extraColorsLabel:"Extra colours",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.",extraColorsInvalid:"Ignored invalid hex: {{tokens}}",colorEffectLabel:"Effect",colorEffect:{none:"None",sparkle:"Sparkle",wood:"Wood",marble:"Marble",glow:"Glow",matte:"Matte",silk:"Silk",galaxy:"Galaxy",rainbow:"Rainbow",metal:"Metal",translucent:"Translucent",gradient:"Gradient",dualColor:"Dual Color",triColor:"Tri Color",multicolor:"Multicolor"},selectMaterialFirst:"Por favor, selecione um material primeiro na aba Informações do Filamento.",noPrintersConfigured:"Nenhuma impressora configurada. Adicione impressoras para usar perfis PA.",matchingFilter:"Correspondente",anyBrand:"Qualquer marca",anyVariant:"Qualquer variante",autoSelect:"Seleção automática",matches:"correspondências",match:"correspondência",noMatches:"Nenhuma correspondência",connected:"Conectado",offline:"Offline",printerOffline:"A impressora está offline. Conecte-se para visualizar os perfis de calibração.",noKProfilesMatch:"Nenhum K-perfil corresponde ao filamento selecionado.",leftNozzle:"Bico Esquerdo",rightNozzle:"Bico Direito",profilesSelected:"perfil(is) de calibração selecionado(s)",totalInventory:"Inventário Total",totalConsumed:"Total Consumido",byMaterial:"Por Material",inPrinter:"Na Impressora",lowStock:"Estoque Baixo",sinceTracking:"Desde o início do rastreamento",loadedInAms:"Carregado no AMS/Ext",remaining:"Restante",weightCheck:"Verificação de Peso",lastWeighed:"Última pesagem",neverWeighed:"Nunca pesado",search:"Pesquisar carretéis...",showing:"Mostrando",to:"até",of:"de",show:"Mostrar",spools:"carretéis",spool:"carretel",page:"Página",noSpoolsMatch:"Nenhum resultado encontrado",noSpoolsMatchDesc:"Tente ajustar sua pesquisa ou filtros para encontrar o que você está procurando.",active:"Ativo",archived:"Arquivado",all:"Todos",used:"Usado",new:"Novo",clearFilters:"Limpar filtros",table:"Tabela",cards:"Cartões",net:"Líquido",groupSimilar:"Agrupar",groupedSpools:"{{count}} carretéis idênticos",groupedRows:"linhas",columns:"Colunas",configureColumns:"Configurar Colunas",configureColumnsDesc:"Arraste para reordenar as colunas ou use as setas. Alterne a visibilidade com o ícone de olho.",visible:"Visível",reset:"Redefinir",cancel:"Cancelar",applyChanges:"Aplicar Alterações",moveUp:"Mover para cima",moveDown:"Mover para baixo",hideColumn:"Ocultar coluna",showColumn:"Mostrar coluna",linkToSpool:"Vincular ao Carretel",tagLinked:"Tag vinculada ao carretel",tagLinkFailed:"Falha ao vincular tag",tagAlreadyLinked:"Tag já vinculada a outro carretel",unknownTag:"Tag RFID desconhecida detectada",usageHistory:"Histórico de Uso",noUsageHistory:"Nenhum uso registrado ainda",printName:"Nome da Impressão",weightConsumed:"Peso Consumido",clearHistory:"Limpar",historyCleared:"Histórico de uso limpo",fillSourceLabel:"(Inv)",lowStockThresholdError:"O limite deve estar entre 0.1 e 99.9",assignMismatchTitle:"Incompatibilidade de material",assignMismatchMessage:'O material do carretel selecionado "{{spoolMaterial}}" não corresponde ao material da bandeja "{{trayMaterial}}" para {{location}}. Atribuir mesmo assim?',assignMismatchConfirm:"Atribuir mesmo assim",assignPartialMismatchMessage:'O material do carretel "{{spoolMaterial}}" é semelhante, mas não corresponde exatamente a "{{trayMaterial}}" em {{location}}. Deseja prosseguir?',assignProfileMismatchMessage:'O perfil do carretel "{{spoolProfile}}" não corresponde ao perfil da bandeja "{{trayProfile}}" em {{location}}. Deseja prosseguir?'},timelapse:{title:"Timelapse",create:"Criar Timelapse",download:"Baixar",delete:"Excluir",preview:"Visualizar",frameRate:"Taxa de Quadros",quality:"Qualidade",processing:"Processando...",noTimelapses:"Nenhum timelapse disponível"},ams:{title:"AMS",slot:"Slot",empty:"Vazio",emptySlot:"Slot vazio",unknown:"Desconhecido",humidity:"Umidade",temperature:"Temperatura",filamentType:"Tipo de Filamento",filamentColor:"Cor",remaining:"Restante",history:"Histórico do AMS",noHistory:"Nenhum histórico disponível",configureSlot:"Configurar Slot",externalSpool:"Carretel Externo",profile:"Perfil",kFactor:"Fator K",fill:"Preencher",configure:"Configurar",used:"usado",remainingUnit:"restante"},printModal:{title:"Iniciar Impressão",selectPrinter:"Selecionar Impressora",selectPlate:"Selecionar Placa",filamentMapping:"Mapeamento de Filamento",totalCost:"Custo total:",slotRemainingShort:" - {{grams}}g rest.",printSettings:"Configurações de Impressão",bedLeveling:"Nivelamento da Mesa",flowCalibration:"Calibração de Fluxo",vibrationCalibration:"Calibração de Vibração",layerInspection:"Inspeção da Primeira Camada",timelapse:"Timelapse",startPrint:"Iniciar Impressão",addToQueue:"Adicionar à Fila",cancel:"Cancelar",noPrintersAvailable:"Nenhuma impressora disponível",printerBusy:"Impressora ocupada",printerOffline:"Impressora offline",sameTypeDifferentColor:"Mesmo tipo, cor diferente",filamentTypeNotLoaded:"Tipo de filamento não carregado",openCalendar:"Abrir calendário",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Bico esquerdo",rightNozzleTooltip:"Bico direito",filamentOverride:"Substituição de Filamento",filamentOverrideHint:"Substitua opcionalmente os filamentos para atribuição baseada em modelo. O agendador usará os filamentos selecionados em vez dos valores originais do 3MF.",originalFilament:"Original",overrideWith:"Substituir por",resetToOriginal:"Restaurar original",insufficientFilamentTitle:"Filamento insuficiente",insufficientFilamentMessage:"Alguns dos carretéis atribuídos têm menos filamento restante do que o necessário para esta impressão:",insufficientFilamentLine:"{{printer}} - {{slot}}: necessário {{required}}g, restante {{remaining}}g",printAnyway:"Imprimir mesmo assim",forceColorMatch:"Forçar correspondência de cor",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Escalonar para {{count}} impressoras",gcodeInjection:"Injetar G-code de auto-impressão"},backup:{title:"Bakup e Restauração",createBackup:"Criar Backup",restoreBackup:"Restaurar Backup",restoreDescription:"Substituir todos os dados a partir de um arquivo de backup",downloadBackup:"Baixar Backup",uploadBackup:"Enviar Backup",lastBackup:"Último Backup",autoBackup:"Auto Backup",backupNow:"Fazer Backup Agora",restoreWarning:"Aviso: Restaurar um backup substituirá todos os dados atuais.",includeArchives:"Incluir Arquivos",includeSettings:"Incluir Configurações",includeProfiles:"Incluir Perfis",backupSuccess:"Backup criado com sucesso",restoreSuccess:"Backup restaurado com sucesso",backupFailed:"Falha ao criar backup",restoreFailed:"Falha ao restaurar backup",restoreNote:"A impressora virtual será parada durante a restauração",githubBackup:"Backup GitHub",enabled:"Ativado",cloudLoginRequired:"Login no Bambu Cloud necessário. Entre em Perfis → Perfis Cloud para ativar o backup GitHub.",cloudLoginRequiredShort:"Login Cloud necessário",githubDescription:"Sincronize automaticamente seus perfis com um repositório GitHub privado para backup e histórico de versões.",repositoryUrl:"URL do repositório",personalAccessToken:"Token de acesso pessoal",tokenSaved:"(salvo)",enterNewToken:"Digite um novo token para atualizar",tokenHint:"Token de granularidade fina com permissão de leitura/escrita de conteúdo",branch:"Branch",manualOnly:"Apenas manual",hourly:"A cada hora",daily:"Diário",weekly:"Semanal",includeInBackup:"Incluir no backup",kProfiles:"K-Perfis",kProfilesDescription:"Calibração de avanço de pressão das impressoras conectadas",noPrintersConnected:"Nenhuma impressora conectada",printersConnected:"{{connected}}/{{total}} conectadas",cloudProfiles:"Perfis Cloud",cloudProfilesDescription:"Predefinições de filamento, impressora e processo do Bambu Cloud",appSettings:"Configurações do App",appSettingsDescription:"Configuração do Bambuddy (banco de dados completo)",spoolInventory:"Inventário de bobinas",spoolInventoryDescription:"Bobinas de filamento, histórico de uso e rastreamento de custos",printArchives:"Arquivos de impressão",printArchivesDescription:"Metadados do histórico de impressão (sem arquivos gcode/3MF)",lastBackupAt:"Último backup:",noBackupsYet:"Nenhum backup ainda",next:"Próximo:",startingBackup:"Iniciando backup...",test:"Testar",enableBackup:"Ativar backup",testConnection:"Testar conexão",enterRepoUrl:"Digite a URL do repositório",enterRepoAndToken:"Digite a URL do repositório e o token de acesso",repoRequired:"A URL do repositório é obrigatória",tokenRequired:"O token de acesso é obrigatório",githubBackupEnabled:"Backup GitHub ativado",tokenUpdated:"Token atualizado",settingsSaved:"Configurações salvas",failedToSave:"Falha ao salvar: {{message}}",backupCompleteFiles:"Backup concluído - {{count}} arquivos atualizados",backupSkippedNoChanges:"Backup ignorado - sem alterações",backupFailed2:"Falha no backup: {{message}}",clearedLogs:"{{count}} logs removidos",failedToClearLogs:"Falha ao limpar logs: {{message}}",history:"Histórico",clear:"Limpar",date:"Data",status:"Status",commit:"Commit",localBackup:"Backup local",localBackupDescription:"Crie um backup completo dos seus dados do Bambuddy incluindo banco de dados, arquivos, uploads e todos os ficheiros.",downloadBackupLabel:"Baixar backup",completeBackupZip:"Backup completo: banco de dados + todos os arquivos (ZIP)",download:"Baixar",preparingBackup:"Preparando backup...",creatingArchive:"Criando arquivo de backup... Isso pode demorar para backups grandes.",downloadingFile:"Baixando arquivo de backup...",backupDownloaded:"Backup baixado com sucesso",failedToCreateBackup:"Falha ao criar backup: {{message}}",restore:"Restaurar",restoreReplacesAll:"A restauração substitui todos os dados.",restoreReplacesAllDetail:"Seu banco de dados e arquivos atuais serão completamente substituídos. É necessário reiniciar após a restauração.",restoreConfirmTitle:"Restaurar backup",restoreConfirmMessage:'Tem certeza de que deseja restaurar de "{{filename}}"? Isso substituirá completamente seu banco de dados e todos os arquivos. O aplicativo precisará ser reiniciado após a restauração.',restoreConfirmButton:"Restaurar backup",uploadingFile:"Enviando arquivo de backup...",backupRestoredRestart:"Backup restaurado. Por favor, reinicie o Bambuddy.",failedToRestore:"Falha ao restaurar backup. Verifique o formato do arquivo.",reloadNow:"Recarregar agora",creatingBackup:"Criando backup",restoringBackup:"Restaurando backup",preparing:"Preparando...",processing:"Processando...",doNotClosePage:"Por favor, não feche esta página nem navegue para outro lugar. Esta operação pode levar vários minutos para backups grandes.",restoring:"Restaurando...",restoreComplete:"Restauração concluída",restoreFailed2:"Falha na restauração",importSettings:"Importar configurações de um arquivo de backup",pleaseWaitRestoring:"Aguarde enquanto seus dados estão sendo restaurados",selectBackupFile:"Clique para selecionar um arquivo de backup (.json ou .zip)",duplicateHandling:"Como funciona o tratamento de duplicatas:",matchPrinters:"Impressoras",matchPrintersBy:"correspondência por número de série",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"correspondência por endereço IP",matchNotificationProviders:"Provedores de notificação",matchNotificationProvidersBy:"correspondência por nome",matchFilaments:"Filamentos",matchFilamentsBy:"correspondência por nome + tipo + marca",matchArchives:"Arquivos",matchArchivesBy:"correspondência por hash de conteúdo (sempre ignorado)",matchPendingUploads:"Uploads pendentes",matchPendingUploadsBy:"correspondência por nome do arquivo",matchSettingsTemplates:"Configurações e modelos",matchSettingsTemplatesBy:"sempre sobrescritos",replaceExisting:"Substituir dados existentes",keepExisting:"Manter dados existentes",overwriteDescription:"Sobrescrever itens que já existem com dados do backup",keepDescription:"Restaurar apenas itens que ainda não existem",overwriteCaution:"Cuidado:",overwriteWarning:"A sobrescrita substituirá suas configurações atuais pelos dados do backup. Códigos de acesso das impressoras nunca são sobrescritos por segurança.",cancel:"Cancelar",processingBackup:"Processando arquivo de backup...",itemsRestored:"Itens restaurados",itemsSkipped:"Itens ignorados",restored:"Restaurados",skippedAlreadyExist:"Ignorados (já existem)",filesCategory:"Arquivos (3MF, miniaturas, etc.)",andMore:"...e mais {{count}}",newApiKeysGenerated:"Novas chaves API geradas",keysShownOnce:"Estas chaves são exibidas apenas uma vez. Copie-as agora!",copy:"Copiar",noDataFound:"Nenhum dado para restaurar foi encontrado no arquivo de backup.",close:"Fechar",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Configurações",notification_providers:"Provedores de notificação",notification_templates:"Modelos de notificação",smart_plugs:"Smart Plugs",printers:"Impressoras",filaments:"Filamentos",maintenance_types:"Tipos de manutenção",archives:"Arquivos",projects:"Projetos",pending_uploads:"Uploads pendentes",external_links:"Links externos",api_keys:"Chaves API"}},tags:{title:"Tags",addTag:"Adicionar Tag",editTag:"Editar Tag",deleteTag:"Excluir Tag",tagName:"Nome da Tag",tagColor:"Cor da Tag",noTags:"Nenhuma tag",deleteConfirm:"Tem certeza de que deseja excluir esta tag?",manageTags:"Gerenciar Tags"},uploadModal:{title:"Upload Arquivos 3MF",dragDrop:"Arraste e solte arquivos .3mf aqui",or:"ou",browseFiles:"Procurar Arquivos",extractionInfo:"O modelo da impressora será extraído automaticamente dos metadados do arquivo 3MF.",uploaded:"enviado",failed:"falhou",uploading:"Enviando...",upload:"Enviar",uploadFailed:"Falha no envio"},editArchive:{title:"Editar Arquivo",name:"Nome",namePlaceholder:"Nome da impressão",printer:"Impressora",noPrinter:"Nenhuma impressora",project:"Projeto",noProject:"Nenhum projeto",itemsPrinted:"Itens Impressos",itemsPrintedHelp:"Número de itens produzidos neste trabalho de impressão",notes:"Notas",notesPlaceholder:"Adicione notas sobre esta impressão...",externalLink:"Link Externo",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link para Printables, Thingiverse ou outra fonte",tags:"Tags",tagsPlaceholder:"Adicionar tags...",addMoreTags:"Adicionar mais tags...",matchingTags:'Correspondendo "{{query}}"',existingTags:"Tags existentes",clickToAdd:"(clique para adicionar)",status:"Status",failureReason:"Motivo da Falha",selectReason:"Selecione o motivo...",photos:"Fotos do Resultado da Impressão",photosHelp:"Clique em + para adicionar fotos do seu resultado impresso",printResult:"Resultado da Impressão",saving:"Salvando...",failureReasons:{adhesionFailure:"Falha de adesão",spaghettiDetached:"Spaghetti / Destacado",layerShift:"Deslocamento de camada",cloggedNozzle:"Bico entupido",filamentRunout:"Fim do filamento",warping:"Warping",stringing:"Stringing",underExtrusion:"Under-extrusion",powerFailure:"Falha de energia",userCancelled:"Cancelado pelo usuário",other:"Outro"},statuses:{completed:"Concluído",failed:"Falhou",aborted:"Cancelado",printing:"Imprimindo"}},kProfiles:{title:"K-Profiles",noPrintersConfigured:"Nenhuma impressora configurada",addPrinterInSettings:"Adicione uma impressora nas Configurações para gerenciar K-profiles",noActivePrinters:"Nenhuma impressora ativa",enablePrinterConnection:"Ative a conexão da impressora para visualizar seus K-profiles",loadingProfiles:"Carregando K-Profiles...",printerOffline:"Impressora Offline",printerOfflineDesc:"A impressora selecionada não está conectada. Ligue-a para visualizar os K-profiles.",noMatchingProfiles:"Nenhum Perfil Correspondente",noMatchingProfilesDesc:"Nenhum perfil corresponde aos seus critérios de pesquisa",noKProfiles:"Nenhum K-Profile",noKProfilesDesc:"Nenhum perfil de avanço de pressão encontrado para bico de {{diameter}}mm",createFirstProfile:"Criar Primeiro Perfil",printer:"Impressora",nozzle:"Bico",refresh:"Atualizar",addProfile:"Adicionar Perfil",export:"Exportar",import:"Importar",select:"Selecionar",selectAll:"Selecionar Todos",delete:"Excluir",searchPlaceholder:"Pesquisar por nome ou filamento...",allExtruders:"Todos os Extrusores",leftOnly:"Apenas Esquerdo",rightOnly:"Apenas Direito",allFlow:"Todo Fluxo",hfOnly:"Apenas HF",sOnly:"Apenas S",sortName:"Ordenar: Nome",sortKValue:"Ordenar: Valor K",sortFilament:"Ordenar: Filamento",leftExtruder:"Extrusor Esquerdo",rightExtruder:"Extrusor Direito",modal:{addTitle:"Adicionar K-Profile",editTitle:"Editar K-Profile",profileName:"Nome do Perfil",profileNamePlaceholder:"Meu Perfil PLA",kValue:"Valor K",kValuePlaceholder:"0.020",kValueHelp:"Faixa típica: 0.01 - 0.06 para PLA, 0.02 - 0.10 para PETG",filament:"Filamento",selectFilament:"Selecionar filamento...",noFilamentsHelp:"Nenhum filamento encontrado. Crie um K-profile no Bambu Studio primeiro.",flowType:"Tipo de Fluxo",highFlow:"Alto Fluxo",standard:"Padrão",nozzleSize:"Tamanho do Bico",extruder:"Extrusor",extruders:"Extrusores",left:"Esquerdo",right:"Direito",notes:"Notas (armazenadas localmente)",notesPlaceholder:"Adicione notas sobre este perfil...",notesHelp:"As notas são salvas no Bambuddy, não na impressora",syncing:"Sincronizando com a impressora...",savingExtruder:"Salvando no extrusor {{current}}/{{total}}...",pleaseWait:"Por favor, aguarde"},deleteConfirm:{title:"Excluir Perfil",cannotUndo:"Isso não pode ser desfeito",message:'Tem certeza de que deseja excluir "{{name}}" da impressora?'},bulkDelete:{title:"Excluir Perfis",cannotUndo:"Isso não pode ser desfeito",message:"Tem certeza de que deseja excluir {{count}} perfis selecionados da impressora?"},toast:{profileSaved:"K-profile salvo",profilesSaved:"K-profile salvo em {{count}} extrusores",selectAtLeastOneExtruder:"Por favor, selecione pelo menos um extrusor",profileDeleted:"K-profile excluído",profilesDeleted:"{{count}} perfis excluídos",exportedProfiles:"{{count}} perfis exportados",importedProfiles:"{{count}} de {{total}} perfis importados",noProfilesToExport:"Nenhum perfil para exportar",invalidFileFormat:"Formato de arquivo inválido",failedToParseImport:"Falha ao analisar o arquivo de importação",failedToSaveBatch:"Falha ao salvar K-profiles",noteSaved:"Nota salva",failedToSaveNote:"Falha ao salvar nota"},permission:{noRead:"Você não tem permissão para atualizar perfis",noCreate:"Você não tem permissão para adicionar perfis",noUpdate:"Você não tem permissão para atualizar K-profiles",noDelete:"Você não tem permissão para excluir K-profiles",noExport:"Você não tem permissão para exportar perfis",noImport:"Você não tem permissão para importar perfis"}},virtualPrinter:{title:"Impressora Virtual",running:"Em execução",stopped:"Parada",description:{default:"Ative uma impressora virtual que aparece no Bambu Studio e no OrcaSlicer. Os arquivos enviados para esta impressora serão arquivados diretamente sem impressão.",proxy:"Ative um proxy que retransmite o tráfego do slicer para uma impressora real, permitindo impressão remota em qualquer rede."},enable:{title:"Ativar Impressora Virtual",visibleInSlicer:'Visível como "Bambuddy" na descoberta do slicer',proxyingTo:"Proxy para {{name}}",notActive:"Não ativo"},model:{title:"Modelo da Impressora",description:"Selecione qual modelo de impressora emular.",restartWarning:"Alterar o modelo reiniciará a impressora virtual"},accessCode:{title:"Código de acesso",isSet:"O código de acesso está definido",notSet:"Nenhum código de acesso definido — necessário para ativar.",placeholder:"Digite um código de 8 caracteres",placeholderChange:"Digite um novo código para alterar",hint:"Deve ter exatamente 8 caracteres. Usado pelos slicers para autenticação.",charCount:"({{count}}/8)"},targetPrinter:{title:"Impressora Alvo",configured:"Proxy alvo configurado",notConfigured:"Nenhuma impressora alvo selecionada - necessário para o modo proxy",placeholder:"Selecione uma impressora...",hint:"Selecione a impressora para a qual o tráfego do slicer será enviado. A impressora deve estar no modo LAN.",noPrinters:"Nenhuma impressora configurada. Adicione uma impressora primeiro para usar o modo proxy."},remoteInterface:{title:"Substituição da Interface de Rede",configured:"Substituição da interface ativa",optional:"Opcional - use se o IP detectado automaticamente estiver errado (por exemplo, várias NICs, Docker, VPN)",placeholder:"Detecção automática (padrão)...",hint:"Substitua o endereço IP anunciado via SSDP e usado no certificado TLS. Útil quando o Bambuddy possui várias interfaces de rede."},mode:{title:"Modo",archive:"Arquivar",archiveDesc:"Arquivar arquivos imediatamente",review:"Revisar",reviewDesc:"Revisar antes de arquivar",queue:"Fila",queueDesc:"Arquivar e adicionar à fila",proxy:"Proxy",proxyDesc:"Retransmitir para impressora real"},autoDispatch:{title:"Envio automático",description:"Iniciar impressões automaticamente quando adicionadas à fila. Quando desativado, as impressões aguardam envio manual."},tailscaleDisabled:{title:"Integração Tailscale",description:"Quando ativado, usa Tailscale para certificados TLS confiáveis. Desative para usar apenas certificado autoassinado."},setupRequired:{title:"Configuração Necessária",description:"O recurso de impressora virtual requer configuração adicional do sistema antes de funcionar. Isso inclui encaminhamento de portas, regras de firewall e configurações específicas da plataforma.",readGuide:"Leia o guia de configuração antes de ativar"},howItWorks:{title:"Como funciona",step1:"Complete o guia de configuração para sua plataforma",step2:"Ative a impressora virtual e defina um código de acesso",step3:'No Bambu Studio ou OrcaSlicer, vá para "Adicionar Impressora"'},status:{title:"Detalhes do Status",printerName:"Nome da Impressora",model:"Modelo",serialNumber:"Número de Série",mode:"Modo",pendingFiles:"Arquivos Pendentes",targetPrinter:"Impressora Alvo",ftpPort:"Porta FTP",mqttPort:"Porta MQTT",ftpConnections:"Conexões FTP",mqttConnections:"Conexões MQTT"},toast:{updated:"Configurações da impressora virtual atualizadas",failedToUpdate:"Falha ao atualizar as configurações",tailscaleNotAvailable:"Tailscale não está instalado neste host. Instale o Tailscale primeiro e tente novamente.",copyFailed:"Falha ao copiar — selecione o texto manualmente",accessCodeRequired:"Defina um código de acesso primeiro",targetPrinterRequired:"Selecione uma impressora alvo primeiro",bindIpRequired:"Defina um IP de ligação primeiro",accessCodeEmpty:"O código de acesso não pode estar vazio",accessCodeLength:"O código de acesso deve ter exatamente 8 caracteres",created:"Impressora virtual criada",failedToCreate:"Falha ao criar impressora virtual",deleted:"Impressora virtual excluída",failedToDelete:"Falha ao excluir impressora virtual"},list:{title:"Impressoras Virtuais",add:"Adicionar",addFirst:"Adicionar Impressora Virtual",empty:"Nenhuma impressora virtual configurada. Adicione uma para começar."},bindIp:{title:"Interface de Rede",placeholder:"Selecionar interface...",hint:"Interface de rede para esta impressora virtual. Deve ser única por impressora."},proxy:{accessCodeHint:"No modo proxy, use o código de acesso da impressora alvo no slicer. A conexão é encaminhada de forma transparente para a impressora real."},addDialog:{title:"Adicionar Impressora Virtual",name:"Nome",hint:"Você pode configurar o código de acesso, impressora alvo e outras configurações após a criação.",create:"Criar"},deleteConfirm:{title:"Excluir Impressora Virtual",message:'Tem certeza que deseja excluir "{{name}}"? Isso irá parar todos os serviços desta impressora.'},archiveNameSource:{title:"Origem do nome do arquivo",description:'Escolha como os novos arquivos são nomeados quando chegam pela impressora virtual. "Metadados" usa o título embutido pelo slicer no 3MF (padrão). "Nome do arquivo" usa o nome que o Bambu Studio enviou via FTP — útil se você renomeou o job no diálogo "enviar para impressora".',metadata:"Metadados",filename:"Nome do arquivo"}},modelViewer:{openInSlicer:"Abrir no Slicer",tabs:{model:"Modelo 3D",gcode:"Pré-visualização G-code"},notAvailable:"Não disponível",notSliced:"Não fatiado",plates:"Placas",allPlates:"Todas as Placas",plateNumber:"Placa {{number}}",plateCount:"{{count}} placa",plateCount_other:"{{count}} placas",objectCount:"{{count}} objeto",objectCount_other:"{{count}} objetos",filamentCount:"{{count}} filamento",filamentCount_other:"{{count}} filamentos",eta:"ETA {{minutes}} min",noPreview:"Pré-visualização não disponível para este arquivo",pagination:{pageOf:"Página {{current}} de {{total}}",prev:"Anterior",next:"Próximo"},errors:{failedToLoad:"Falha ao carregar o arquivo",noMeshes:"Nenhuma malha encontrada no arquivo 3MF",unsupportedFormat:"Formato de arquivo não suportado"}},maintenanceDescriptions:{lubricateCarbonRods:"Aplique lubrificante nos eixos de carbono para um movimento suave",lubricateRails:"Aplique lubrificante nos trilhos lineares para um movimento suave",cleanNozzle:"Limpe o hotend e o bico para evitar entupimentos",checkBelts:"Verifique a tensão das correias para impressões precisas",cleanBuildPlate:"Limpe a placa de construção para melhor adesão",checkExtruder:"Verifique as engrenagens do extrusor quanto ao desgaste",checkCooling:"Verifique se os ventiladores de resfriamento estão funcionando corretamente",generalInspection:"Inspeção geral da impressora",cleanCarbonRods:"Limpe os eixos de carbono para reduzir o atrito",lubricateSteelRods:"Aplique lubrificante nas barras de aço para um movimento suave",cleanSteelRods:"Limpe as barras de aço para reduzir o atrito",cleanLinearRails:"Limpe os trilhos lineares para remover poeira e detritos",checkPtfeTube:"Verifique o tubo PTFE quanto ao desgaste ou danos",replaceHepaFilter:"Substitua o filtro HEPA para qualidade do ar",replaceCarbonFilter:"Substitua o filtro de carbono ativado",lubricateLeftNozzleRail:"Lubrifique o trilho do bico esquerdo (série H2)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Abrir o painel de administração da tomada inteligente",deleteSmartPlug:"Excluir Tomada Inteligente",turnOnSmartPlug:"Ligar Tomada Inteligente",turnOffSmartPlug:"Desligar Tomada Inteligente",turnOn:"Ligar",turnOff:"Desligar",addSmartPlug:{scanningNetwork:"Procurando na rede...",chooseEntity:"Escolha uma entidade...",connectionFailed:"Falha na conexão",searchEntities:"Pesquisar entidades...",searchPowerSensors:"Pesquisar sensores de energia...",searchEnergySensors:"Pesquisar sensores de energia...",placeholders:{plugName:"Tomada da Sala",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Mesmo que o tópico de energia, ou diferente"}},linkedTo:"Vinculado a:",monitorOnly:"Apenas monitoramento",alerts:"Alertas",scheduleOn:"Ligar {{time}}",scheduleOff:"Desligar {{time}}",on:"Ligado",off:"Desligado",power:"Potência",kwhToday:"kWh Hoje",settings:"Configurações",automationSettings:"Configurações de automação",showInSwitchbar:"Mostrar na barra de interruptores",quickAccessSidebar:"Acesso rápido pela barra lateral",enabled:"Ativado",enableAutomation:"Ativar automação para este plugue",autoOn:"Auto Ligar",autoOnDescription:"Ligar quando a impressão iniciar",autoOff:"Auto Desligar",autoOffDescription:"Desligar quando a impressão terminar (única vez)",autoOffPersistent:"Manter ativado",autoOffPersistentDescription:"Permanecer ativado entre impressões em vez de única vez",turnOffDelayMode:"Modo de atraso para desligar",time:"Tempo",temp:"Temp",delayMinutes:"Atraso (minutos)",tempThreshold:"Limite de temperatura (°C)",tempThresholdDescription:"Desliga quando o bico esfria abaixo desta temperatura",edit:"Editar",deleteConfirm:'Tem certeza que deseja excluir "{{name}}"? Esta ação não pode ser desfeita.',turnOnConfirm:'Tem certeza que deseja ligar "{{name}}"?',turnOffConfirm:'Tem certeza que deseja desligar "{{name}}"? Isso cortará a energia do dispositivo conectado.',failedToTurn:'Falha ao {{action}} "{{name}}"',unknown:"Desconhecido",addTitle:"Adicionar plugue inteligente",editTitle:"Editar plugue inteligente",stopScanning:"Parar varredura",discoverTasmota:"Descobrir dispositivos Tasmota",foundDevices:"{{count}} dispositivo(s) encontrado(s) - clique para selecionar:",noDevicesFound:"Nenhum dispositivo Tasmota encontrado na sua rede",haNotConfigured:"Home Assistant não está configurado. Configure em",haSettingsPath:"Configurações → Rede → Home Assistant",selectEntity:"Selecionar entidade *",ipAddress:"Endereço IP *",nameLabel:"Nome *",username:"Usuário",password:"Senha",authHint:"Deixe vazio se seu dispositivo Tasmota não requer autenticação",linkToPrinter:"Vincular à impressora",noPrinter:"Sem impressora (apenas controle manual)",linkingDescription:"A vinculação permite ligar/desligar automaticamente ao iniciar/terminar impressão",powerAlerts:"Alertas de potência",alertAbove:"Alertar se acima (W)",alertBelow:"Alertar se abaixo (W)",alertDescription:"Receba notificações quando o consumo de energia ultrapassar estes limites. Deixe vazio para desativar essa direção.",dailySchedule:"Programação diária",turnOnAt:"Ligar às",turnOffAt:"Desligar às",scheduleDescription:"Ligar/desligar automaticamente o plugue nestes horários diariamente. Deixe vazio para pular essa ação.",showOnPrinterCard:"Mostrar no cartão da impressora",displayOnPrinterCard:"Exibir botão no cartão da impressora",connectedResult:"Conectado!",deviceLabel:"Dispositivo: {{name}} - ",stateLabel:"Estado: {{state}}",test:"Testar",delete:"Excluir",save:"Salvar",add:"Adicionar",cancel:"Cancelar",failedToStartScan:"Falha ao iniciar varredura",nameRequired:"Nome é obrigatório",entityRequired:"Entidade é obrigatória para plugues Home Assistant",mqttTopicRequired:"Pelo menos um tópico MQTT deve ser configurado para potência, energia ou monitoramento de estado",loadingEntities:"Carregando entidades...",loading:"Carregando...",failedToLoadEntities:"Falha ao carregar entidades: {{error}}",noEntitiesMatching:'Nenhuma entidade encontrada correspondente a "{{search}}"',noEntitiesAvailable:"Nenhuma entidade disponível",searchingEntities:"Buscando todas as entidades ({{count}} encontradas)",showingEntities:"Mostrando switch, light, input_boolean ({{count}} disponíveis)",energyMonitoringOptional:"Monitoramento de energia (Opcional)",energyMonitoringHint:"Pesquise e selecione sensores que fornecem dados de potência/energia.",powerSensorW:"Sensor de potência (W)",energyTodayKwh:"Energia hoje (kWh)",totalEnergyKwh:"Energia total (kWh)",noMatchingSensors:"Nenhum sensor correspondente",none:"Nenhum",mqttNotConfigured:"Broker MQTT não configurado. Defina o endereço do broker em",mqttSettingsPath:"Configurações → Rede → Publicação MQTT",mqttNotConfiguredSuffix:"(você não precisa ativar a publicação, apenas preencha os detalhes do broker).",mqttMonitorOnlyDescription:"Plugues MQTT recebem dados de potência/energia via assinatura MQTT. O controle liga/desliga não está disponível - use seu broker MQTT ou sistema de automação residencial.",powerMonitoring:"Monitoramento de potência",energyMonitoring:"Monitoramento de energia",stateMonitoring:"Monitoramento de estado",optional:"opcional",topic:"Tópico",jsonPath:"Caminho JSON",multiplier:"Multiplicador",onValue:"Valor ON",mqttPowerHint:`O caminho JSON extrai o valor do payload JSON (ex: "power_l1"). Deixe vazio se o tópico publica valores numéricos brutos.
+Valore ON: la stringa esatta che significa "ON". Lascia vuoto per rilevamento auto (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"URL potenza",restPowerPath:"Power JSON Path",restPowerMultiplier:"Moltiplicatore potenza",restEnergyUrl:"URL energia",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Moltiplicatore energia",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"URL separato per i dati di potenza (usa l'URL di stato se vuoto)",restEnergyUrlHint:"URL separato per i dati di energia (usa l'URL di stato se vuoto)",restEnergyHint:"Ogni valore può usare il proprio URL o ricadere sull'URL di stato. Usa i moltiplicatori per la conversione delle unità (es. 0.001 per convertire Wh in kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"Nessun interruttore nella barra",enableSwitchbarHint:'Abilita "Mostra nella barra interruttori" in Impostazioni > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"Email",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notifiche email tramite SMTP",telegram:"Notifiche tramite bot Telegram",discord:"Invia a un canale Discord tramite webhook",ntfy:"Notifiche push gratuite e self-hostabili",pushover:"Notifiche push semplici e affidabili",callmebot:"Notifiche WhatsApp gratuite tramite CallMeBot",webhook:"POST HTTP generico verso qualsiasi URL",homeassistant:"Notifiche persistenti nella dashboard di Home Assistant"},lastSuccess:"Ultimo: {{date}}",error:"Errore",printer:"Stampante:",allPrinters:"Tutte le stampanti",sendTestNotification:"Invia notifica di prova",eventSettings:"Impostazioni eventi",enabled:"Abilitato",sendFromProvider:"Invia notifiche da questo provider",printEvents:"Eventi di stampa",printerStatus:"Stato stampante",amsAlarms:"Allarmi AMS",amsHtAlarms:"Allarmi AMS-HT",printQueue:"Coda di stampa",start:"Avvio",plateCheck:"Controllo piatto",complete:"Completato",failed:"Fallito",stopped:"Interrotto",progress:"Avanzamento",offline:"Offline",lowFilament:"Filamento scarso",maintenance:"Manutenzione",amsHumidity:"Umidità AMS",amsTemp:"Temp AMS",amsHtHumidity:"Umidità AMS-HT",amsHtTemp:"Temp AMS-HT",bedCooled:"Piatto raffreddato",firstLayer:"Primo strato",quiet:"Silenzioso",digest:"Riepilogo {{time}}",printStarted:"Stampa avviata",plateNotEmpty:"Piatto non vuoto",plateNotEmptyDescription:"Oggetti rilevati prima della stampa",printCompleted:"Stampa completata",bedCooledLabel:"Piatto raffreddato",bedCooledDescription:"Piatto raffreddato sotto la soglia dopo la stampa",firstLayerCompleteLabel:"Primo strato completato",firstLayerCompleteDescription:"Notifica con foto al termine del primo strato",missingSpoolAssignmentLabel:"Assegnazione bobina mancante",missingSpoolAssignmentDescription:"Notifica quando una stampa parte e i vassoi richiesti non hanno una bobina assegnata",printFailed:"Stampa fallita",printStopped:"Stampa interrotta",progressMilestones:"Traguardi di avanzamento",progressMilestonesDescription:"Notifica al 25%, 50%, 75%",printerOffline:"Stampante offline",printerError:"Errore stampante",lowFilamentLabel:"Filamento scarso",maintenanceDue:"Manutenzione necessaria",maintenanceDueDescription:"Notifica quando è necessaria la manutenzione",amsHumidityHigh:"Umidità AMS elevata",amsHumidityHighDescription:"L'umidità dell'AMS standard supera la soglia",amsTemperatureHigh:"Temperatura AMS elevata",amsTemperatureHighDescription:"La temperatura dell'AMS standard supera la soglia",amsHtHumidityHigh:"Umidità AMS-HT elevata",amsHtHumidityHighDescription:"L'umidità dell'AMS-HT supera la soglia",amsHtTemperatureHigh:"Temperatura AMS-HT elevata",amsHtTemperatureHighDescription:"La temperatura dell'AMS-HT supera la soglia",jobAdded:"Lavoro aggiunto",jobAddedDescription:"Lavoro aggiunto alla coda",jobAssigned:"Lavoro assegnato",jobAssignedDescription:"Lavoro basato su modello assegnato alla stampante",jobStarted:"Lavoro avviato",jobStartedDescription:"Lavoro in coda avviato per la stampa",jobWaiting:"Lavoro in attesa",jobWaitingDescription:"Lavoro in attesa di filamento o stampante",jobSkipped:"Lavoro saltato",jobSkippedDescription:"Lavoro saltato (precedente fallito)",jobFailed:"Lavoro fallito",jobFailedDescription:"Avvio del lavoro fallito",queueComplete:"Coda completata",queueCompleteDescription:"Tutti i lavori in coda completati",quietHours:"Ore silenziose",noNotificationsDuring:"Nessuna notifica durante queste ore",editProviderToChangeQuietHours:"Modifica il provider per cambiare le ore silenziose",dailyDigest:"Riepilogo giornaliero",batchNotifications:"Raggruppa le notifiche in un unico riepilogo giornaliero",sendAt:"Invia alle {{time}}",editProviderToChangeDigestTime:"Modifica il provider per cambiare l'orario del riepilogo",edit:"Modifica",deleteProvider:"Elimina provider di notifica",deleteConfirm:'Sei sicuro di voler eliminare "{{name}}"? Questa azione non può essere annullata.',delete:"Elimina",addTitle:"Aggiungi provider di notifica",editTitle:"Modifica provider di notifica",nameLabel:"Nome *",namePlaceholder:"Le mie notifiche",providerTypeLabel:"Tipo di provider *",configuration:"Configurazione",testConfiguration:"Testa configurazione",printerFilter:"Filtro stampante",onlyFromPrinter:"Invia notifiche solo per eventi da questa stampante",quietHoursDnd:"Ore silenziose (Non disturbare)",quietStart:"Inizio",quietEnd:"Fine",dailyDigestLabel:"Riepilogo giornaliero",sendDigestAt:"Invia riepilogo alle",digestCollected:"Gli eventi verranno raccolti e inviati come riepilogo unico a quest'ora",notificationEvents:"Eventi di notifica",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(dopo il completamento della stampa)",eventPriority:{sectionTitle:"Priorità ntfy",helpNtfy:"Scegli una priorità per ogni evento abilitato. ntfy le usa per intensificare gli avvisi (suono, visibilità, comportamento push). I livelli non impostati qui usano l'impostazione predefinita del server ntfy.",min:"Min",low:"Bassa",default:"Predefinita",high:"Alta",urgent:"Urgente"},cancel:"Annulla",save:"Salva",add:"Aggiungi",nameRequired:"Il nome è obbligatorio",fieldRequired:"{{field}} è obbligatorio",phoneNumber:"Numero di telefono",apiKey:"Chiave API",serverUrl:"URL del server",topic:"Argomento",authToken:"Token di autenticazione",userKey:"Chiave utente",appToken:"Token applicazione",priority:"Priorità",botToken:"Token del bot",chatId:"ID chat",smtpServer:"Server SMTP",smtpPort:"Porta SMTP",security:"Sicurezza",authentication:"Autenticazione",username:"Nome utente",password:"Password",fromEmail:"Email mittente",toEmail:"Email destinatario",webhookUrl:"URL webhook",payloadFormat:"Formato payload",authorization:"Autorizzazione",titleFieldName:"Nome campo titolo",messageFieldName:"Nome campo messaggio",editTemplate:"Modifica modello: {{name}}",titleLabel:"Titolo",bodyLabel:"Corpo",titlePlaceholder:"Titolo della notifica...",bodyPlaceholder:"Corpo della notifica...",availableVariables:"Variabili disponibili",clickToInsert:"Clicca per inserire alla posizione del cursore nel corpo",livePreview:"Anteprima live",hide:"Nascondi",show:"Mostra",loadingPreview:"Caricamento anteprima...",enterTemplateContent:"Inserisci il contenuto del modello per vedere l'anteprima",titlePreview:"Titolo:",bodyPreview:"Corpo:",resetToDefault:"Ripristina predefinito",titleRequired:"Il titolo è obbligatorio",bodyRequired:"Il corpo è obbligatorio",notificationLog:"Registro notifiche",showFailedOnly:"Solo fallite",last24Hours:"Ultime 24 ore",last7Days:"Ultimi 7 giorni",last30Days:"Ultimi 30 giorni",last90Days:"Ultimi 90 giorni",justNow:"Proprio ora",noFailedNotifications:"Nessuna notifica fallita",noNotificationsLogged:"Nessuna notifica registrata",unknownProvider:"Provider sconosciuto",logTitle:"Titolo",logMessage:"Messaggio",logError:"Errore",logProvider:"Provider: {{type}}",logTime:"Ora: {{time}}",refresh:"Aggiorna",clearOld:"Cancella vecchie",statsSummary:"Ultimi {{days}} giorni:",statsNotifications:"notifiche",statsSent:"{{count}} inviate",statsFailed:"{{count}} fallite",eventTypes:{print_start:"Stampa avviata",print_complete:"Stampa completata",print_failed:"Stampa fallita",print_stopped:"Stampa interrotta",print_progress:"Avanzamento",printer_offline:"Stampante offline",printer_error:"Errore stampante",filament_low:"Filamento scarso",maintenance_due:"Manutenzione necessaria",test:"Prova"},userEmail:{title:"Notifiche",emailNotifications:"Notifiche via e-mail",emailNotificationsDesc:"Ricevi notifiche via e-mail per i tuoi lavori di stampa. Le e-mail vengono inviate tramite le impostazioni SMTP configurate nell'autenticazione avanzata.",sendingTo:"Le notifiche verranno inviate a",noEmailWarning:"Il tuo account non ha un indirizzo e-mail. Contatta un amministratore per aggiungerne uno.",printJobNotifications:"Notifiche lavori di stampa",printJobNotificationsDesc:"Scegli quali eventi attivano le notifiche e-mail per i lavori di stampa che invii.",printJobStarts:"Inizio lavoro di stampa",printJobStartsDesc:"Ricevi una notifica quando il tuo lavoro di stampa inizia.",printJobFinishes:"Fine lavoro di stampa",printJobFinishesDesc:"Ricevi una notifica quando il tuo lavoro di stampa si completa correttamente.",printErrors:"Errori di stampa",printErrorsDesc:"Ricevi una notifica quando il tuo lavoro di stampa fallisce o incontra un errore.",printJobStops:"Lavoro di stampa interrotto",printJobStopsDesc:"Ricevi una notifica quando il tuo lavoro di stampa viene annullato o interrotto.",saveSuccess:"Preferenze di notifica salvate.",saveError:"Impossibile salvare le preferenze di notifica."}},richTextEditor:{bold:"Grassetto",italic:"Corsivo",underline:"Sottolineato",bulletList:"Elenco puntato",numberedList:"Elenco numerato",alignLeft:"Allinea a sinistra",alignCenter:"Allinea al centro",alignRight:"Allinea a destra",addLink:"Aggiungi link",removeLink:"Rimuovi link"},externalLinks:{noLinksConfigured:"Nessun link esterno configurato",deleteLink:"Elimina link",removeCustomIcon:"Rimuovi icona personalizzata",openInNewTab:"Apri in nuova scheda",placeholders:{linkName:"Il mio link"}},keyboardShortcuts:{title:"Scorciatoie da tastiera",navigation:"Navigazione",archivesSection:"Archivi",kProfilesSection:"Profili K",generalSection:"Generale",shortcuts:{goToPrinters:"Vai a Stampanti",goToArchives:"Vai ad Archivi",goToQueue:"Vai a Coda",goToStats:"Vai a Statistiche",goToProfiles:"Vai a Profili cloud",goToSettings:"Vai a Impostazioni",focusSearch:"Vai alla ricerca",openUploadModal:"Apri finestra di caricamento",clearSelection:"Cancella selezione / deseleziona input",contextMenu:"Menu contestuale sulle schede",refreshProfiles:"Aggiorna profili",newProfile:"Nuovo profilo",exitSelectionMode:"Esci dalla modalità selezione",showHelp:"Mostra questa guida"},footer:"Premi Esc o clicca fuori per chiudere"},notificationLog:{title:"Registro notifiche",events:{printStarted:"Stampa avviata",printComplete:"Stampa completata",printFailed:"Stampa fallita",printStopped:"Stampa interrotta",progress:"Avanzamento",printerOffline:"Stampante offline",printerError:"Errore stampante",lowFilament:"Filamento in esaurimento",maintenanceDue:"Manutenzione in scadenza",test:"Test"},timeAgo:{justNow:"Adesso",minutesAgo:"{{minutes}} min fa",hoursAgo:"{{hours}} ore fa"}},restoreBackup:{title:"Ripristina backup",restoring:"Ripristino...",restoreComplete:"Ripristino completato",restoreFailed:"Ripristino fallito",importSettings:"Importa impostazioni da un file di backup",pleaseWait:"Attendere il ripristino dei dati",clickToSelect:"Clicca per selezionare il file di backup (.json o .zip)",howDuplicateHandling:"Come funziona la gestione dei duplicati:",categories:{printers:"Stampanti",smartPlugs:"Prese smart",notificationProviders:"Provider di notifica",filaments:"Filamenti",archives:"Archivi",pendingUploads:"Caricamenti in sospeso",settingsTemplates:"Impostazioni e modelli"},matchingInfo:{printers:"abbinati per numero di serie",smartPlugs:"abbinati per indirizzo IP",notificationProviders:"abbinati per nome",filaments:"abbinati per nome + tipo + marca",archives:"abbinati per hash del contenuto",pendingUploads:"abbinati per nome file",settingsTemplates:"sempre sovrascritti"},replaceExisting:"Sostituisci dati esistenti",keepExisting:"Mantieni dati esistenti",replaceDescription:"Sovrascrivi gli elementi già esistenti con i dati del backup",keepDescription:"Ripristina solo gli elementi che non esistono già",caution:"Attenzione:",cautionText:"La sovrascrittura sostituirà le configurazioni attuali con i dati del backup. I codici di accesso delle stampanti non vengono mai sovrascritti per sicurezza.",itemsRestored:"Elementi ripristinati",itemsSkipped:"Elementi saltati",restored:"Ripristinati",skipped:"Saltati (già esistenti)",filesLabel:"File (3MF, miniature, ecc.)",newApiKeysGenerated:"Nuove chiavi API generate",newApiKeysWarning:"Queste chiavi vengono mostrate una sola volta. Copiale adesso!",processingBackup:"Elaborazione file di backup...",noDataFound:"Nessun dato trovato da ripristinare nel file di backup.",failedToRestore:"Impossibile ripristinare il backup. Verificare il formato del file."},backupExport:{title:"Esporta backup",selectData:"Seleziona i dati da includere",selectAll:"Seleziona tutto",selectNone:"Deseleziona tutto",categoryDescriptions:{settings:"Lingua, tema, preferenze di aggiornamento",notifications:"ntfy, Pushover, Discord, ecc.",templates:"Modelli di messaggi personalizzati",smartPlugs:"Configurazioni prese Tasmota",externalLinks:"Link della barra laterale a servizi esterni",printers:"Info stampanti (codici di accesso esclusi)",plateDetection:"Immagini di riferimento piatto vuoto",filaments:"Tipi di filamento e costi",maintenance:"Programmi di manutenzione personalizzati",archives:"Tutti i dati di stampa + file (3MF, miniature, foto)",projects:"Progetti, elementi BOM e allegati",pendingUploads:"Caricamenti della stampante virtuale in attesa di revisione",apiKeys:"Chiavi API webhook (nuove chiavi generate all'importazione)"},requiresPrinters:"Richiede la selezione di Stampanti",zipFileWarning:"Verrà creato un file ZIP.",zipFileDescription:"Include tutti i file 3MF, miniature, timelapse e foto. Potrebbe richiedere tempo e produrre un file di grandi dimensioni.",includeAccessCodes:"Includi codici di accesso",includeAccessCodesDescription:"Per il trasferimento su un'altra macchina",includeAccessCodesWarning:"I codici di accesso saranno inclusi in testo semplice. Mantieni sicuro questo file di backup!",categoriesSelected:"{{selectedCount}} categorie selezionate"},pendingUploads:{placeholders:{notes:"Aggiungi note su questa stampa..."},discardUpload:"Scarta caricamento",archiveAllUploads:"Archivia tutti i caricamenti",discardAllUploads:"Scarta tutti i caricamenti",archive:"Archivia",timeAgo:{justNow:"Adesso",minutesAgo:"{{minutes}} min fa",hoursAgo:"{{hours}} ore fa",daysAgo:"{{days}} giorni fa"}},apiBrowser:{placeholders:{requestBody:"Corpo della richiesta JSON...",searchEndpoints:"Cerca endpoint..."}},configureAmsSlot:{title:"Configura Slot AMS",slotConfigured:"Slot configurato!",configuringSlot:"Configurazione slot:",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Cerca preset...",colorPlaceholder:"Nome colore o hex (es. marrone, FF8800)",clearCustomColor:"Cancella colore personalizzato",noCloudPresets:"Nessun preset cloud. Accedi a Bambu Cloud per sincronizzare.",noPresetsAvailable:"Nessun preset disponibile. Accedi a Bambu Cloud o importa profili locali.",noMatchingPresets:"Nessun preset corrispondente trovato.",custom:"Personalizzato",builtin:"Integrato",settingsSentToPrinter:"Impostazioni inviate alla stampante",filamentProfile:"Profilo filamento",kProfileLabel:"Profilo K (Pressure Advance)",filteringFor:"Filtrando per: {{material}}",noKProfile:"Nessun profilo K (usa predefinito 0.020)",noMatchingKProfiles:"Nessun profilo K corrispondente. Verrà usato K=0.020 predefinito.",selectFilamentFirst:"Seleziona prima un profilo filamento",kFromCalibration:"K={{value}} dalla calibrazione stampante",customColorLabel:"Colore personalizzato (opzionale)",presetColors:"Colori {{name}}:",showLessColors:"Mostra meno colori",showMoreColors:"Mostra più colori",clear:"Cancella",hexLabel:"Hex: #{{hex}}",resetting:"Ripristino...",resetSlot:"Ripristina slot",cancel:"Annulla",configuring:"Configurazione...",configureSlot:"Configura slot"},githubBackup:{title:"Backup GitHub",history:"Cronologia",downloadBackup:"Scarica backup",restoreBackup:"Ripristina backup",noBackupsYet:"Nessun backup ancora"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Cerca tag...",renameTag:"Rinomina tag",deleteTag:"Elimina tag"},notificationTemplates:{placeholders:{title:"Titolo notifica...",body:"Corpo notifica..."}},batchTag:{placeholders:{newTag:"Inserisci nuovo tag..."}},photoGallery:{deletePhoto:"Elimina foto"},filamentHoverCard:{copySpoolUuid:"Copia UUID bobina"},kProfilesView:{hasNote:"Ha una nota",copyProfile:"Copia profilo"},layout:{openMenu:"Apri menu",noPermissionSystemInfo:"Non hai il permesso di visualizzare le informazioni di sistema"},dashboard:{dragToReorder:"Trascina per riordinare",hideWidget:"Nascondi widget"},notificationProviderCard:{deleteNotificationProvider:"Elimina provider di notifica"},fileManagerModal:{closeFileManager:"Chiudi gestore file",sortFiles:"Ordina file",goToParentFolder:"Vai alla cartella superiore",threeView:"Vista 3D"},embeddedCameraViewer:{refreshStream:"Aggiorna stream",close:"Chiudi",zoomOut:"Rimpicciolisci",resetZoom:"Reimposta zoom",zoomIn:"Ingrandisci",dragToResize:"Trascina per ridimensionare"},timelapseViewer:{skipBack5s:"Indietro 5s",skipForward5s:"Avanti 5s"},notificationProviders:{descriptions:{email:"Notifiche email via SMTP",telegram:"Notifiche tramite bot Telegram",discord:"Invia a canale Discord tramite webhook",ntfy:"Notifiche push gratuite e self-hostabili",pushover:"Notifiche push semplici e affidabili",callmebot:"Notifiche WhatsApp gratuite tramite CallMeBot",webhook:"POST HTTP generico a qualsiasi URL"}},logViewer:{searchPlaceholder:"Cerca messaggio o nome logger...",noLogEntries:"Nessuna voce di log trovata"},switchbarPopover:{noSwitchesInSwitchbar:"Nessun interruttore nella barra"},projectPageModal:{placeholders:{title:"Titolo",designer:"Designer",license:"Licenza",description:"Inserisci descrizione...",profileTitle:"Titolo profilo",profileDescription:"Descrizione profilo..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"In attesa",justNow:"Proprio ora",now:"Ora",minsAgo:"{{count}}m fa",inMins:"tra {{count}}m",hoursAgo:"{{count}}h fa",inHours:"tra {{count}}h",daysAgo:"{{count}}g fa",inDays:"tra {{count}}g"},spoolbuddy:{nav:{dashboard:"Dashboard",ams:"AMS",inventory:"Inventario",writeTag:"Scrivi",settings:"Impostazioni"},status:{nfcReady:"NFC pronto",nfcOff:"NFC spento",offline:"Offline",online:"Online",noPrinters:"Nessuna stampante",deviceOffline:"Dispositivo offline",waitingConnection:"In attesa della connessione...",systemReady:"Sistema pronto",status:"Stato"},dashboard:{readyToScan:"Pronto per la scansione",idleMessage:"Posiziona una bobina sulla bilancia per identificarla",nfcHint:"Il tag NFC verrà letto automaticamente",device:"Dispositivo",syncWeight:"Sincronizza peso",weightSynced:"Sincronizzato!",unknownTag:"Tag sconosciuto",newTag:"Nuovo tag rilevato",onScale:"sulla bilancia",linkSpool:"Collega a bobina",linkTagTitle:"Collega tag a bobina",linkTag:"Collega tag",selectSpool:"Seleziona una bobina da collegare a questo tag:",noUntagged:"Nessuna bobina senza tag trovata",tagDetected:"Tag rilevato",noTag:"Nessun tag",tagId:"Tag",grossWeight:"Peso lordo",spoolSize:"Dimensione bobina",close:"Chiudi",currentSpool:"Bobina attuale",plateReady:"Piatto pronto: {{name}}",plateReadyLabel:"Piatti da liberare",plateClearAction:"Libera",plateClearedToast:"Piatto contrassegnato come liberato",plateClearFailed:"Impossibile contrassegnare il piatto come liberato"},modal:{spoolDetected:"Bobina rilevata",assignToAms:"Assegna all'AMS",syncWeight:"Sincronizza peso",weightSynced:"Sincronizzato!",syncing:"Sincronizzazione...",newTagDetected:"Nuovo tag rilevato",addToInventory:"Aggiungi all'inventario",assignToAmsTitle:"Assegna all'AMS",selectSlot:"Seleziona uno slot",assign:"Assegna",assigning:"Assegnazione...",assignSuccess:"Assegnato!",assignError:"Impossibile assegnare la bobina. Riprovare.",noPrinterSelected:"Seleziona una stampante...",noAmsDetected:"Nessun AMS rilevato su questa stampante",slot:"Slot"},weight:{noReading:"Nessuna lettura",stable:"Stabile",measuring:"Misurazione...",tare:"Tara",calibrate:"Calibra"},spool:{remaining:"Rimanente",material:"Materiale",brand:"Marca",color:"Colore",coreWeight:"Nucleo",labelWeight:"Etichetta",scaleWeight:"Bilancia",netWeight:"Netto",lastUsed:"Ultimo utilizzo"},ams:{noData:"Nessun AMS rilevato",connectAms:"Collega un AMS per vedere gli slot",noPrinter:"Nessuna stampante selezionata",selectPrinter:"Seleziona una stampante dalla barra superiore",printerDisconnected:"Stampante disconnessa",humidity:"Umidità",level:"Livello",active:"Attivo",slot:"Slot",empty:"Vuoto"},inventory:{search:"Cerca bobine...",empty:"Nessuna bobina nell'inventario",noResults:"Nessuna bobina corrispondente",spools:"bobine",addSpool:"Aggiungi bobina"},settings:{tabDevice:"Dispositivo",tabDisplay:"Display",tabScale:"Bilancia",tabUpdates:"Aggiornamenti",nfcReader:"Lettore NFC",type:"Tipo",connection:"Connessione",notConnected:"N/A",deviceInfo:"Info dispositivo",hostname:"Host",uptime:"Tempo di attività",brightness:"Luminosità",saved:"Salvato",noBacklight:"Nessuna retroilluminazione DSI rilevata. Il controllo luminosità richiede un display DSI.",screenBlank:"Timeout spegnimento schermo",screenBlankDesc:"Lo schermo si spegne dopo inattività. Tocca per riattivare.",displayNote:"La luminosità viene applicata come filtro software.",scaleCalibration:"Calibrazione bilancia",currentWeight:"Peso attuale",tareOffset:"Tara",calFactor:"Fattore",knownWeight:"Peso noto",calStep1:"Rimuovere tutto dalla bilancia e premere Imposta zero.",calStep2:"Posizionare il peso noto sulla bilancia.",setZero:"Imposta zero",calibrateNow:"Calibra",calibrated:"Calibrato",tareSet:"Comando tara inviato. In attesa del dispositivo...",tareFailed:"Invio comando tara fallito",zeroSet:"Punto zero impostato. Posizionare il peso noto sulla bilancia.",calibrationDone:"Calibrazione completata!",calibrationFailed:"Calibrazione fallita",lastCalibrated:"Ultima calibrazione",stable:"Stabile",settling:"Stabilizzazione...",firmware:"Firmware",scale:"Bilancia",noDevice:"Nessun dispositivo SpoolBuddy trovato",daemonVersion:"Versione daemon",currentVersion:"Attuale",versionPending:"In attesa del daemon...",checking:"Verifica...",checkUpdates:"Verifica aggiornamenti",updateAvailable:"Aggiornamento disponibile",updateInstructions:"Aggiorna via SSH: esegui lo script di installazione SpoolBuddy.",upToDate:"Aggiornato",includeBeta:"Includi versioni beta",systemConfig:"Backend & autenticazione",backendUrl:"URL backend Bambuddy",apiToken:"Token API",apiTokenPlaceholder:"Inserisci token API",saveConfig:"Salva configurazione",systemQueued:"Configurazione in coda.",systemFieldsRequired:"L'URL del backend è obbligatorio.",nfcDiagnostic:"Diagnostica NFC",scaleDiagnostic:"Diagnostica bilancia",readTagDiagnostic:"Diagnostica lettura tag",testNfc:"Test lettore",testScale:"Test precisione",testReadTag:"Leggi tag"},writeTag:{tabExisting:"Bobina esistente",tabNew:"Nuova bobina",tabReplace:"Sostituisci tag",searchPlaceholder:"Cerca per materiale, colore, marca...",noUntaggedSpools:"Nessuna bobina senza tag",noTaggedSpools:"Nessuna bobina con tag",selectSpool:"Seleziona una bobina, poi posiziona un NTAG sul lettore",placeTag:"Posiziona un NTAG sul lettore",tagReady:"Tag rilevato — pronto per la scrittura",writeTag:"Scrivi tag",replaceTag:"Sostituisci tag",writing:"Scrittura tag...",waiting:"In attesa di SpoolBuddy...",writeSuccess:"Tag scritto con successo!",writeFailed:"Scrittura fallita",queueFailed:"Impossibile accodare il comando di scrittura",tryAgain:"Riprova",cancel:"Annulla",replaceWarning:"Il vecchio tag verrà scollegato. Il nuovo tag lo sostituirà.",deviceOffline:"SpoolBuddy è offline",material:"Materiale",colorName:"Nome colore",color:"Colore",brand:"Marca",weight:"Peso (g)",createSpool:"Crea bobina",creating:"Creazione...",spoolCreated:"Bobina creata! Pronto per la scrittura.",createFailed:"Impossibile creare la bobina"},quickMenu:{printerPower:"Alimentazione stampante",systemControls:"Sistema",restartDaemon:"Riavvia daemon",restartBrowser:"Riavvia browser",reboot:"Riavvia",shutdown:"Spegni",swipeToClose:"Scorri verso il basso per chiudere",confirmTitle:"Conferma",confirmShutdown:"Sei sicuro di voler spegnere lo SpoolBuddy? Avrai bisogno di accesso fisico per riaccenderlo.",confirmReboot:"Sei sicuro di voler riavviare lo SpoolBuddy?",confirmRestartDaemon:"Riavviare il daemon SpoolBuddy? NFC e bilancia saranno temporaneamente non disponibili.",confirmRestartBrowser:"Riavviare il browser kiosk? Lo schermo diventerà brevemente nero.",confirm:"Conferma",confirmPlugOn:"Accendere {{name}}?",confirmPlugOff:"Spegnere {{name}}?",turnOn:"Accendi",turnOff:"Spegni"}},bugReport:{title:"Segnala un bug",description:"Descrizione",descriptionPlaceholder:"Cosa è andato storto? Descrivi il problema...",email:"Email (opzionale)",emailPlaceholder:"tua@email.it",emailPrivacy:"Se fornita, la tua email sarà inclusa in una sezione compressa dell'issue GitHub per permettere al manutentore di contattarti.",screenshot:"Screenshot",uploadOrPaste:"Carica, incolla o trascina un'immagine",dataCollectedSummary:"Quali dati sono inclusi nel report?",dataIncluded:"Inclusi:",dataIncludedList:"Versione app, OS, architettura, versione Python, statistiche database (solo conteggi), modelli stampante, numero ugelli, versioni firmware, stato connessione, stato integrazioni (Spoolman, MQTT, HA), impostazioni non sensibili, conteggio interfacce di rete, dettagli Docker, versioni dipendenze.",dataNeverIncluded:"Mai inclusi:",dataNeverIncludedList:"Nomi stampanti, numeri di serie, codici di accesso, password, indirizzi IP, indirizzi email, chiavi API, token, URL webhook, nomi host o nomi utente.",submit:"Invia",startLogging:"Avvia registrazione debug",stepEnableLogging:"Registrazione debug attivata",stepReproduce:"Riproduci il problema ora",stepStopLogging:"Ferma & invia rapporto",stopAndSubmit:"Ferma & Invia",maxDuration:"Arresto automatico dopo {{minutes}} min",stoppingLogs:"Raccolta log & invio...",submitting:"Invio segnalazione bug...",submitSuccess:"Segnalazione bug inviata con successo!",submitFailed:"Impossibile inviare la segnalazione bug",thankYou:"Grazie!",submitted:"La tua segnalazione bug è stata inviata.",viewIssue:"Vedi issue",unexpectedError:"Si è verificato un errore imprevisto"},failureDetection:{title:"Rilevamento guasti con IA",description:"Monitora le stampe tramite un'API ML Obico auto-ospitata e agisce automaticamente sui guasti rilevati.",mlUrl:"URL API ML Obico",mlUrlHint:"URL base del tuo container Obico ml_api auto-ospitato (es. http://192.168.1.10:3333).",test:"Prova",testSuccess:"API ML raggiungibile e funzionante.",testFailed:"Impossibile raggiungere l'API ML.",sensitivity:"Sensibilità",sensitivityLow:"Bassa (meno falsi positivi)",sensitivityMedium:"Media (bilanciata)",sensitivityHigh:"Alta (rilevamento precoce, più falsi positivi)",sensitivityHint:"Regola le soglie di confidenza che attivano avvisi e guasti.",action:"Azione al guasto rilevato",actionNotify:"Solo notifica",actionPause:"Metti in pausa",actionPauseOff:"Pausa e stacca corrente",pollInterval:"Intervallo di controllo (secondi)",pollIntervalHint:"Frequenza di controllo di ogni stampante durante la stampa. Minimo 5s, massimo 120s.",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"Stampanti monitorate",perPrinterHint:"Scegli quali stampanti il servizio di rilevamento deve monitorare.",monitorAll:"Monitora tutte le stampanti connesse",statusTitle:"Stato",serviceRunning:"Servizio in esecuzione",thresholds:"Soglie bassa / alta",activePrinters:"Stampe attive",noActivePrints:"Nessuna stampa in corso.",historyTitle:"Rilevamenti recenti",noHistory:"Nessun rilevamento finora."},makerworld:{title:"MakerWorld",description:"Incolla un URL di un modello MakerWorld per importarlo e stamparlo direttamente da Bambuddy — senza passare dall'app Bambu Handy.",pasteUrlHeader:"Importa da MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… o incolla qualsiasi link MakerWorld",resolveButton:"Risolvi",signInRequiredTitle:"Accesso Bambu Cloud richiesto per scaricare",signInRequiredBody:"Puoi consultare i dettagli del modello in modo anonimo, ma MakerWorld richiede un account Bambu Cloud per scaricare i file 3MF.",openCloudSettings:"Apri impostazioni Cloud",untitledModel:"Modello senza titolo",byCreator:"di {{name}}",downloadsCount:"{{count}} download",licensePrefix:"Licenza",alreadyImported:"Già nella libreria",openOnMakerworld:"Apri su MakerWorld",alreadyInLibrary:"Questo modello è già nella tua libreria — lo trovi in Gestione file → MakerWorld",importSuccess:"{{filename}} importato — salvato in Gestione file → MakerWorld",platesHeader:"Piatti ({{count}})",plateDefaultName:"Piatto {{n}}",materialCount:"{{count}} filamenti",amsRequired:"AMS richiesto",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"Salva",sliceIn:"Salva e affetta in {{slicer}}",disclaimer:"L'integrazione MakerWorld utilizza endpoint API documentati dalla community. Bambuddy non è affiliato né approvato da MakerWorld o Bambu Lab.",lastImportSuccess:"Importato nella tua libreria",lastImportAlreadyInLibrary:"Già nella tua libreria",viewInLibrary:"Visualizza in Gestione file",openInBambuStudio:"Apri in Bambu Studio",openInOrcaSlicer:"Apri in OrcaSlicer",importTo:"Importa in Gestione file",recentImportsHeader:"Importazioni recenti",phaseResolving:"Risoluzione",phaseDownloading:"Download",folderAuto:"MakerWorld (predefinita)",importAll:"Importa tutto",importAllProgress:"Importazione {{current}}/{{total}}",openGallery:"Apri galleria immagini",galleryPrev:"Immagine precedente",galleryNext:"Immagine successiva",deleteImport:"Rimuovi dalla libreria",importDeleting:"Rimozione…",importDeleted:"Rimosso dalla libreria",confirmDelete:"Rimuovere {{filename}} dalla libreria? Il file locale verrà eliminato, ma il piatto può essere re-importato da MakerWorld.",errors:{resolveFailed:"Impossibile risolvere questo URL MakerWorld.",downloadFailed:"Download non riuscito. Riprova.",deleteFailed:"Impossibile rimuovere il file dalla libreria."}},libraryTrash:{title:"Cestino",headerButton:"Cestino",headerTooltip:"Visualizza i file spostati nel cestino",backToFiles:"Torna al gestore file",subtitleAdmin:"I file eliminati restano qui per {{days}} giorni, poi vengono rimossi automaticamente. Questa vista mostra il cestino di tutti gli utenti.",subtitleUser:"I file eliminati restano qui per {{days}} giorni, poi vengono rimossi automaticamente.",loading:"Caricamento del cestino…",loadError:"Impossibile caricare il cestino.",empty:"Il cestino è vuoto.",summary:"{{count}} file · {{size}}",emptyTrash:"Svuota cestino",restore:"Ripristina",purgeNow:"Elimina ora",autoPurgeIn:"Eliminazione automatica tra {{when}}",days:"giorni",retentionLabel:"Elimina automaticamente dopo",selectAll:"Seleziona tutto",selectOne:"Seleziona {{filename}}",selectionCount:"{{count}} selezionati",bulkRestore:"Ripristina selezionati",bulkPurge:"Elimina selezionati",col:{filename:"File",folder:"Cartella",size:"Dimensione",deleted:"Spostato nel cestino",autoPurge:"Eliminazione auto.",owner:"Proprietario",actions:"Azioni"},confirm:{purgeTitle:"Eliminare definitivamente?",purgeBody:"{{filename}} verrà eliminato dal disco e non potrà essere ripristinato.",emptyTitle:"Svuotare il cestino?",emptyBody:"Tutti i {{count}} file verranno eliminati dal disco. Azione non annullabile.",bulkPurgeTitle:"Eliminare definitivamente i file selezionati?",bulkPurgeBody:"I {{count}} file selezionati verranno eliminati dal disco e non potranno essere ripristinati.",cta:"Elimina definitivamente"},toast:{restored:"File ripristinato.",restoreFailed:"Impossibile ripristinare il file.",purged:"File eliminato definitivamente.",purgeFailed:"Impossibile eliminare il file.",emptied:"{{count}} file eliminati dal cestino.",emptyFailed:"Impossibile svuotare il cestino.",retentionSaved:"Eliminazione automatica impostata su {{days}} giorni.",retentionFailed:"Impossibile salvare l'impostazione di conservazione.",bulkRestored:"{{count}} file ripristinati.",bulkPurged:"{{count}} file eliminati."}},libraryPurge:{title:"Elimina file vecchi",headerButton:"Elimina vecchi",headerTooltip:"Sposta in blocco i file vecchi nel cestino",description:"I file più vecchi della soglia verranno spostati nel cestino. Le cartelle esterne vengono ignorate. Puoi ripristinarli dal cestino prima dell'eliminazione automatica.",ageLabel:"Sposta i file più vecchi di",days:"giorni",includeNeverPrinted:"Includi i file mai stampati",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"Verifica quanti file corrispondono…",previewFailed:"Impossibile mostrare l'anteprima.",previewSummary:"{{count}} file · {{size}} verrebbero spostati nel cestino",andMore:"…e altri {{count}}",warning:"I file vengono eliminati in modo soft — puoi ripristinarli dal cestino fino alla scadenza del periodo di conservazione.",confirmCta:"Sposta {{count}} nel cestino",purging:"Spostamento nel cestino…",toast:{success:"{{count}} file spostati nel cestino.",failed:"Impossibile eliminare i file."}},libraryAutoPurge:{enableLabel:"Elimina automaticamente i file vecchi",enableDescription:"Esegue l'eliminazione amministrativa una volta al giorno. I file finiscono prima nel cestino — non vengono eliminati immediatamente.",ageLabel:"Elimina automaticamente i file più vecchi di",ageDescription:"Minimo 7 giorni, massimo 10 anni. Usa la stessa regola di età del pulsante Elimina manuale.",days:"giorni",includeNeverPrinted:"Includi i file mai stampati",saveFailed:"Impossibile salvare le impostazioni di eliminazione automatica."},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},kme={nav:{printers:"Impressoras",archives:"Arquivos",queue:"Fila",stats:"Estatísticas",profiles:"Perfis",maintenance:"Manutenção",projects:"Projetos",inventory:"Inventário",files:"Gerenciador de Arquivos",makerworld:"MakerWorld",notifications:"Notificações",settings:"Configurações",system:"Sistema",collapseSidebar:"Recolher barra lateral",expandSidebar:"Expandir barra lateral",update:"Atualizar",updateAvailable:"Atualização disponível: v{{version}}",updateAvailableBanner:"Versão {{version}} está disponível!",viewUpdate:"Ver atualização",viewOnGithub:"Ver no GitHub",keyboardShortcuts:"Atalhos de teclado (?)",switchToLight:"Mudar para modo claro",switchToDark:"Mudar para modo escuro",smartSwitches:"Interruptores inteligentes",logout:"Sair"},common:{save:"Salvar",saving:"Salvando...",cancel:"Cancelar",delete:"Excluir",edit:"Editar",add:"Adicionar",close:"Fechar",confirm:"Confirmar",loading:"Carregando...",error:"Erro",success:"Sucesso",warning:"Aviso",enabled:"Ativado",disabled:"Desativado",yes:"Sim",no:"Não",on:"Ligado",off:"Desligado",all:"Todos",none:"Nenhum",search:"Pesquisar",filter:"Filtrar",sort:"Ordenar",refresh:"Atualizar",download:"Baixar",upload:"Enviar",uploading:"Enviando...",uploadFailed:"Falha no envio",actions:"Ações",status:"Status",name:"Nome",description:"Descrição",date:"Data",time:"Hora",hours:"Horas",minutes:"Minutos",seconds:"Segundos",days:"Dias",enable:"Ativar",disable:"Desativar",permissions:"Permissões",noPrinters:"Nenhuma impressora configurada",noData:"Nenhum dado disponível",linkNotFound:"Link não encontrado",required:"Obrigatório",optional:"Opcional",dismiss:"Dispensar",apply:"Aplicar",reset:"Redefinir",export:"Exportar",import:"Importar",clear:"Limpar",selectAll:"Selecionar tudo",deselectAll:"Desmarcar tudo",noChange:"— Sem alterações —",unchanged:"Inalterado",unassigned:"Não atribuído",unknown:"Desconhecido",unknownError:"Erro desconhecido",today:"Hoje",tomorrow:"Amanhã",asap:"O mais rápido possível",overdue:"Atrasado",now:"Agora",collapse:"Recolher",expand:"Expandir",viewArchive:"Ver arquivo",viewInFileManager:"Ver no Gerenciador de Arquivos",addedBy:"Adicionado por {{username}}",prints:"impressões",more:"+{{count}} mais",ascending:"Crescente",descending:"Decrescente",back:"Voltar",copy:"Copiar",copied:"Copiado!",printer:"Impressora",remove:"Remover",type:"Tipo",print:"Imprimir",rename:"Renomear",move:"Mover",create:"Criar",duplicate:"Duplicar",left:"Esquerda",right:"Direita"},printers:{title:"Impressoras",addPrinter:"Adicionar Impressora",editPrinter:"Editar Impressora",deletePrinter:"Excluir Impressora",printerName:"Nome da Impressora",serialNumber:"Número de Série",ipAddress:"Endereço IP / Nome do Host",accessCode:"Código de Acesso",model:"Modelo",nozzleCount:"Número de Bicos",autoArchive:"Arquivamento Automático",status:{available:"Disponível",idle:"Ocioso",printing:"Imprimindo",paused:"Pausado",offline:"Offline",problem:"Problema",error:"Erro",finished:"Concluído",unknown:"Desconhecido"},temperatures:{nozzle:"Bico",bed:"Cama",chamber:"Câmara"},progress:"{{percent}}% concluído",timeRemaining:"{{time}} restante",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',maintenanceOk:"Manutenção OK",maintenanceWarning:"{{count}} aviso",maintenanceWarning_plural:"{{count}} avisos",maintenanceDue:"{{count}} devido",maintenanceDue_plural:"{{count}} devido",sort:{name:"Nome",status:"Status",model:"Modelo",location:"Localização",ascending:"Ordem crescente",descending:"Ordem decrescente"},cardSize:{small:"Cartões pequenos",medium:"Cartões médios",large:"Cartões grandes",extraLarge:"Cartões extra grandes"},hideOffline:"Ocultar offline",nextAvailable:"Próximo disponível",powerOn:"Ligar",offlinePrintersWithPlugs:"Impressoras offline com tomadas inteligentes",noPrintersConfigured:"Nenhuma impressora configurada ainda",search:"Pesquisar impressoras...",noSearchResults:"Nenhuma impressora corresponde à sua pesquisa ou filtros",filter:{allStatuses:"Todos os status",allLocations:"Todos os locais"},readyToPrint:"Pronto para imprimir",external:"Externo",extL:"Ext-L",extR:"Ext-R",deleteArchives:"Excluir arquivos de impressão",noLabel:"Sem etiqueta",printPreview:"Pré-visualização de impressão",width:"Largura",height:"Altura",noObjectsFound:"Nenhum objeto encontrado",objectsLoadedOnPrintStart:"Objetos são carregados quando uma impressão começa",willBeSkipped:"Será ignorado",name:"Nome",serialCannotBeChanged:"Número de série não pode ser alterado",locationHelp:"Usado para agrupar impressoras e filtrar trabalhos na fila",wifiSignal:{veryWeak:"Muito fraco",weak:"Fraco",fair:"Regular",good:"Bom",excellent:"Excelente"},maintenanceUpToDate:"Toda a manutenção está em dia - Clique para ver",chamberLightOn:"Ligar luz da câmara",chamberLightOff:"Desligar luz da câmara",files:"Arquivos",browseFiles:"Procurar arquivos da impressora",autoOffAfterPrint:"Desligamento automático após impressão",autoOffExecuted:"Desligamento automático executado - ligue a impressora para reiniciar",hmsErrors:"Erros HMS",viewHmsErrors:"Ver {{count}} erro(s) HMS",resume:"Retomar",pause:"Pausar",stop:"Parar",camera:"âmera",skipObject:"Ignorar objeto",reconnect:"Reconectar",forceRefresh:"Forçar atualização",forceRefreshSuccess:"Atualização solicitada",mqttDebug:"Depuração MQTT",printerInformation:"Informações da impressora",copyToClipboard:"Copiar",copied:"Copiado!",state:"Estado",wifiSignalLabel:"Sinal WiFi",developerMode:"Modo desenvolvedor",enabled:"Ativado",disabled:"Desativado",addedOn:"Adicionada em",sdCard:"Cartão SD",inserted:"Inserido",notInserted:"Não inserido",totalPrintHours:"Horas de impressão",activeNozzle:"Ativo: {{nozzle}} bico",nozzleRack:"Suporte de bicos",nozzleDocked:"Acoplado",nozzleMounted:"Montado",nozzleActive:"Ativo",nozzleIdle:"Ocioso",nozzleDiameter:"Diâmetro",nozzleType:"Tipo",nozzleStatus:"Status",nozzleFilament:"Filamento",nozzleWear:"Desgaste",nozzleMaxTemp:"Temp Máx",nozzleSerial:"Serial",nozzleHardenedSteel:"Aço Endurecido",nozzleStainlessSteel:"Aço Inoxidável",nozzleTungstenCarbide:"Carboneto de Tungstênio",nozzleFlow:"Fluxo",nozzleHighFlow:"Alto Fluxo",nozzleStandardFlow:"Fluxo Padrão",firmwareUpdate:"Atualização de Firmware",firmwareInstructions:"No visor da impressora, vá para",firmwareNav:"Navegar para",settings:"Configurações",firmware:"Firmware",discoverPrinters:"Descobrir Impressoras",searching:"Procurando...",manualEntry:"Entrada Manual",addFromCloud:"Adicionar da Nuvem",toast:{printerDeleted:"Impressora excluída",missingSpoolAssignment:"Impressão iniciada em {{printer}}. Atribuição de bobina ausente para: {{slots}}",printerAdded:"Impressora adicionada",printerUpdated:"Impressora atualizada",failedToDelete:"Falha ao excluir impressora",failedToAdd:"Falha ao adicionar impressora",failedToUpdate:"Falha ao atualizar impressora",commandSent:"Comando enviado",failedToSendCommand:"Falha ao enviar comando",turnedOn:"{{name}} ligado",failedToPowerOn:"Falha ao ligar {{name}}",scriptTriggered:"Script acionado",printStopped:"Impressão parada",printPaused:"Impressão pausada",printResumed:"Impressão retomada",referenceDeleted:"Referência excluída",detectionAreaSaved:"Área de detecção salva",failedToRunScript:"Falha ao executar script",failedToStopPrint:"Falha ao parar impressão",failedToPausePrint:"Falha ao pausar impressão",failedToResumePrint:"Falha ao retomar impressão",failedToControlChamberLight:"Falha ao controlar a luz da câmara",failedToSetSpeed:"Falha ao definir a velocidade de impressão",failedToUpdateSetting:"Falha ao atualizar configuração",failedToSkipObjects:"Falha ao ignorar objetos",failedToRereadRfid:"Falha ao reler RFID",failedToCheckPlate:"Falha ao verificar a placa",failedToUpdateLabel:"Falha ao atualizar etiqueta",failedToDeleteReference:"Falha ao excluir referência",failedToSaveDetectionArea:"Falha ao salvar área de detecção",plateCheckEnabled:"Verificação da placa ativada",plateCheckDisabled:"Verificação da placa desativada",calibrationSaved:"Calibração salva!",calibrationFailed:"Falha na calibração",rfidRereadInitiated:"Releitura de RFID iniciada"},connection:{connected:"Conectado",offline:"Offline"},plateStatus:{markCleared:"Marcar placa como liberada",cleared:"Placa liberada",notCleared:"Placa não liberada",inUse:"Placa em uso"},queue:{inQueue:"{{count}} impressão na fila",inQueue_plural:"{{count}} impressões na fila"},controls:"Controles",rfid:{reread:"Releitura de RFID"},bedJog:{title:"Mover a mesa de impressão",bed:"Mesa",step:"Passo (mm)",up:"Mover mesa para cima",down:"Mover mesa para baixo",disabledWhilePrinting:"Desativado durante a impressão",notHomedTitle:"Impressora não referenciada",notHomedMessage:"A impressora não foi referenciada desde a última impressão. Execute a referência automática primeiro para um posicionamento seguro (estaciona o cabeçote, depois referencia X, Y e Z), ou mova assim mesmo — os fins de curso de software serão ignorados.",homeZ:"Referência automática",moveAnyway:"Mover assim mesmo",homingStarted:"Referenciando impressora automaticamente…"},permission:{noAdd:"Você não tem permissão para adicionar impressoras",noEdit:"Você não tem permissão para editar impressoras",noDelete:"Você não tem permissão para excluir impressoras",noControl:"Você não tem permissão para controlar impressoras",noFiles:"Você não tem permissão para acessar arquivos de impressora",noAmsRfid:"Você não tem permissão para reler RFID AMS",noSmartPlugControl:"Você não tem permissão para controlar tomadas inteligentes",noCamera:"Você não tem permissão para visualizar câmeras"},modal:{addTitle:"Adicionar Impressora",editTitle:"Editar Impressora",myPrinter:"Minha Impressora",selectModel:"Selecionar modelo...",locationGroup:"Localização / Grupo (opcional)",locationPlaceholder:"ex.: Oficina, Escritório, Porão",autoArchiveLabel:"Arquivar automaticamente impressões concluídas",fromPrinterSettings:"A partir das configurações da impressora",modelOptional:"Modelo (opcional)",saveChanges:"Salvar alterações"},skipObjects:{tooltip:"Ignorar objetos",onlyWhilePrinting:"Ignorar objetos (apenas durante a impressão)",requiresMultiple:"Ignorar objetos (requer 2+ objetos)",title:"Ignorar Objetos",matchIdsInfo:"Correspondência de IDs com o display da sua impressora",printerShowsIds:"A tela da impressora mostra os IDs dos objetos na placa de construção",skipSelected:"Ignorar Selecionados",skipping:"Ignorando...",noObjectsSelected:"Nenhum objeto selecionado",selectObjectsToSkip:"Selecione os objetos que deseja ignorar na impressão atual",skipped:"Ignorado",objectsSkipped:"Objetos ignorados",activeCount:"{{count}} ativo",waitForLayer:"Aguarde a camada 2+ para ignorar objetos (atualmente na camada {{layer}})",skip:"Ignorar",confirmTitle:"Ignorar Objeto?",confirmMessage:'Tem certeza de que deseja ignorar "{{name}}"? Isso não pode ser desfeito.'},confirm:{deleteTitle:"Excluir Impressora",deleteMessage:'Tem certeza de que deseja excluir "{{name}}"? Isso removerá todas as configurações de conexão.',deleteArchivesNote:"Todo o histórico de impressão desta impressora será permanentemente excluído.",keepArchivesNote:"O histórico de impressão será mantido, mas não estará mais associado a esta impressora.",stopTitle:"Parar Impressão",stopMessage:'Tem certeza de que deseja parar a impressão atual em "{{name}}"? Isso cancelará o trabalho de impressão.',stopButton:"Parar Impressão",pauseTitle:"Pausar Impressão",pauseMessage:'Tem certeza de que deseja pausar a impressão atual em "{{name}}"?',pauseButton:"Pausar Impressão",resumeTitle:"Retomar Impressão",resumeMessage:'Tem certeza de que deseja retomar a impressão em "{{name}}"?',resumeButton:"Retomar Impressão",powerOnTitle:"Ligar Impressora",powerOnMessage:'Tem certeza de que deseja ligar a impressora "{{name}}"?',powerOnButton:"Ligar",powerOffTitle:"Desligar Impressora",powerOffMessage:'Tem certeza de que deseja desligar a impressora "{{name}}"?',powerOffWarning:'AVISO: "{{name}}" está imprimindo no momento! Tem certeza de que deseja desligar a impressora? Isso interromperá a impressão e pode danificar a impressora.',powerOffButton:"Desligar"},bulk:{select:"Selecionar",selectAll:"Selecionar tudo",selectByLocation:"Selecionar por local",selected:"{{count}} selecionado(s)",actions:{stop:"Parar",pause:"Pausar",resume:"Retomar",clearPlate:"Limpar mesa",clearHMS:"Limpar notificações"},confirm:{stopTitle:"Parar {{count}} impressões",stopMessage:"Isso cancelará as impressões ativas em {{count}} impressora(s). Esta ação não pode ser desfeita.",stopButton:"Parar todas",pauseTitle:"Pausar {{count}} impressões",pauseMessage:"Isso pausará as impressões ativas em {{count}} impressora(s).",pauseButton:"Pausar todas",clearPlateTitle:"Limpar {{count}} mesas de impressão",clearPlateMessage:"Isso limpará a mesa de impressão em {{count}} impressora(s) e pode iniciar trabalhos na fila.",clearPlateButton:"Limpar todas"},success:"{{action}} concluído em {{count}} impressora(s)",partial:"{{succeeded}} bem-sucedido(s), {{failed}} falhou/falharam",noneApplicable:"Nenhuma impressora selecionada está no estado correto para esta ação",selectByState:"Selecionar por estado"},discovery:{title:"Descobrir Impressoras",searching:"Procurando...",scanning:"Escaneando...",scanProgress:"Escaneando... {{scanned}}/{{total}}",foundPrinters:"{{count}} impressora(s) encontrada(s)",noPrintersFound:"Nenhuma impressora encontrada",noPrintersFoundSubnet:"Nenhuma impressora encontrada na sub-rede especificada.",noPrintersFoundNetwork:"Nenhuma impressora encontrada na rede.",allConfigured:"Todas as impressoras descobertas já estão configuradas.",alreadyAdded:"Já adicionada",select:"Selecionar",manualEntry:"Entrada Manual",addFromCloud:"Adicionar da Nuvem",subnetToScan:"Sub-rede para escanear",dockerNote:"Docker detectado. Insira a sub-rede da sua impressora em notação CIDR. Requer network_mode: host no docker-compose.yml.",scanSubnet:"Escanear Sub-rede para Impressoras",discoverNetwork:"Descobrir Impressoras na Rede",scanningSubnet:"Escaneando sub-rede para impressoras Bambu...",scanningNetwork:"Escaneando rede...",serialRequired:"Serial necessário",unknown:"Desconhecido",failedToStart:"Falha ao iniciar a descoberta"},drying:{start:"Iniciar secagem",stop:"Parar secagem",temperature:"Temperatura",duration:"Duração",hours:"horas",timeRemaining:"{{time}} restante",active:"Secagem",notSupported:"Secagem não suportada",powerRequired:"Conecte o adaptador de energia AMS para ativar a secagem",startingDrying:"Iniciando secagem...",stoppingDrying:"Parando secagem...",rotateTray:"Girar o carretel durante a secagem"},filaments:"Filamentos",openCameraOverlay:"Abrir sobreposição da câmera",openCameraWindow:"Abrir câmera em nova janela",firmwareUpdateAvailable:"Atualização de firmware disponível: {{current}} → {{latest}}",firmwareUpToDate:"Firmware {{version}} — Atualizado",firmwareUpdateButton:"Atualizar",plateDetection:{noPermission:"Você não tem permissão para atualizar impressoras",enabledClick:"Verificação da placa ativada - Clique para desativar",disabledClick:"Verificação da placa desativada - Clique para ativar",manageCalibration:"Gerenciar calibração da detecção da placa",calibrationRequired:"Calibração necessária",calibrationInstructions:"Certifique-se de que a placa de construção esteja <strong>completamente vazia</strong>, em seguida clique em Calibrar.",calibrationDescription:"A calibração captura uma imagem de referência da placa vazia. Verificações futuras compararão com esta referência para detectar objetos.",calibrationTip:"<strong>Dica:</strong> Você pode armazenar até 5 calibrações para diferentes placas. O sistema usa automaticamente a melhor correspondência ao verificar.",plateEmpty:"A placa parece vazia",objectsDetected:"Objetos detectados na placa",confidence:"Confiança",difference:"Diferença",analysisPreview:"Pré-visualização da análise:",analysisLegend:"Caixa verde = área de detecção, Sobreposição vermelha = diferenças em relação à calibração",savedReferences:"Referências salvas ({{count}}/{{max}})",deleteReference:"Excluir referência",labelPlaceholder:"Etiqueta...",clickToEdit:"{{label}} - Clique para editar",clickToAddLabel:"Clique para adicionar etiqueta"},speed:{title:"Velocidade de impressão",silent:"Silencioso (50%)",standard:"Padrão (100%)",sport:"Sport (124%)",ludicrous:"Ludicrous (166%)"},airduct:{title:"Modo do duto de ar",cooling:"Resfriamento",heating:"Aquecimento"},noSdCard:"Sem SD",door:{open:"Aberta",closed:"Fechada"},fans:{partCooling:"Ventilador de resfriamento da peça",auxiliary:"Ventilador auxiliar",chamber:"Ventilador da câmara"},clickToViewHmsErrors:"Clique para ver erros do HMS",estimatedCompletion:"Tempo estimado de conclusão",plateNumber:"Placa {{number}}",slotOptions:"Opções de slot",amsPopup:{friendlyName:"Nome do AMS",friendlyNamePlaceholder:"ex.: Nome amigável do AMS",serialNumber:"Número de série",firmwareVersion:"Firmware",save:"Salvar",clear:"Limpar",noEditPermission:"Você não tem permissão para renomear unidades AMS"},firmwareModal:{title:"Atualização de Firmware",titleUpToDate:"Informações do Firmware",currentVersion:"Atual:",latestVersion:"Última:",releaseNotes:"Notas de Lançamento",checkingPrereqs:"Verificando pré-requisitos...",sdCardReady:"Cartão SD pronto. Clique abaixo para enviar o firmware.",uploadedSuccess:"Firmware enviado para o cartão SD!",applyInstructions:"Para aplicar a atualização na sua impressora:",step1:"Na tela sensível ao toque da impressora, vá para <strong>Configurações</strong>",step2:"Navegue até <strong>Firmware</strong>",step3:"Selecione <strong>Atualizar a partir do cartão SD</strong>",step4:"A atualização levará de 10 a 20 minutos",done:"Concluído",starting:"Iniciando...",uploadFirmware:"Enviar Firmware",uploadFailed:"Falha ao iniciar o envio: {{error}}",uploadedToast:"Firmware enviado! Inicie a atualização na tela da impressora.",availableVersions:"Versões disponíveis",usable:"Utilizável",unavailable:"Indisponível",installed:"Instalada",newerBadge:"mais recente",olderBadge:"mais antiga",currentBadge:"atual"},accessCodePlaceholder:"Deixe vazio para manter o atual",roi:{title:"Área de Detecção (ROI)",xStart:"Início X",yStart:"Início Y",width:"Largura",height:"Altura",instruction:"Ajuste a área de detecção para focar na placa de construção. A caixa verde na pré-visualização mostra a área atual."},developerModeWarning:"O modo desenvolvedor LAN não está ativado em: {{names}}. Alguns recursos podem não funcionar.",howToEnable:"Como ativar",incompatibleFile:"Este arquivo foi fatiado para {{slicedFor}}, mas esta impressora é uma {{printerModel}}",dropNotPrintable:"Apenas arquivos .gcode e .gcode.3mf podem ser impressos",dropToPrint:"Solte para imprimir",cannotPrint:"Impressora ocupada"},archives:{title:"Arquivos de Impressão",searchPlaceholder:"Pesquisar arquivos...",filterByPrinter:"Filtrar por impressora",filterByStatus:"Filtrar por status",sortBy:"Ordenar por",sortNewest:"Mais recentes primeiro",sortOldest:"Mais antigos primeiro",sortName:"Nome",sortDuration:"Duração",sortLargest:"Maiores primeiro",sortSmallest:"Menores primeiro",sortSize:"Tamanho",noArchives:"Nenhum arquivo encontrado",noArchivesSearch:"Nenhum arquivo corresponde à sua pesquisa",originalPrintNotVisible:"Impressão original não visível - tente limpar os filtros",noArchivesYet:"Ainda não há arquivos",prints:"impressões",pagination:{showing:"Mostrando",to:"a",of:"de",show:"Mostrar",page:"Página",all:"Todos"},loadingArchives:"Carregando arquivos...",releaseToUpload:"Solte para enviar",showAll:"Mostrar todos",showFavoritesOnly:"Mostrar apenas favoritos",gridView:"Visualização em grade",listView:"Visualização em lista",calendarView:"Visualização em calendário",logView:"Registro de impressão",manageTags:"Gerenciar etiquetas",showFailedPrints:"Mostrar impressões falhas",hideFailedPrints:"Ocultar impressões falhas",hideDuplicates:"Ocultar duplicados",viewOriginalPrint:"Clique para visualizar a impressão original (#{{id}})",printTime:"Tempo de impressão",filamentUsed:"Filamento usado",cost:"Custo",reprint:"Reimprimir",preview:"Pré-visualizar",deleteArchive:"Excluir arquivo",deleteConfirm:"Tem certeza de que deseja excluir este arquivo?",favorite:"Favorito",unfavorite:"Remover dos favoritos",viewDetails:"Ver detalhes",status:{completed:"Concluído",failed:"Falhou",stopped:"Parado"},toast:{source3mfAttached:"Arquivo de origem 3MF anexado: {{filename}}",failedUploadSource3mf:"Falha ao enviar arquivo de origem 3MF",source3mfRemoved:"Arquivo de origem 3MF removido",failedRemoveSource3mf:"Falha ao remover arquivo de origem 3MF",f3dAttached:"F3D anexado: {{filename}}",failedUploadF3d:"Falha ao enviar F3D",f3dRemoved:"F3D removido",failedRemoveF3d:"Falha ao remover F3D",timelapseAttached:"Timelapse anexado: {{filename}}",timelapseAlreadyAttached:"Timelapse já anexado",noMatchingTimelapse:"Nenhum timelapse correspondente encontrado",failedScanTimelapse:"Falha ao escanear timelapse",failedAttachTimelapse:"Falha ao anexar timelapse",timelapseRemoved:"Timelapse removido",failedRemoveTimelapse:"Falha ao remover timelapse",timelapseUploaded:"Timelapse enviado: {{filename}}",failedUploadTimelapse:"Falha ao enviar timelapse",archiveDeleted:"Arquivo excluído",failedDeleteArchive:"Falha ao excluir arquivo",addedToFavorites:"Adicionado aos favoritos",removedFromFavorites:"Removido dos favoritos",projectUpdated:"Projeto atualizado",failedUpdateProject:"Falha ao atualizar projeto",linkCopied:"Link copiado para a área de transferência",failedCopyLink:"Falha ao copiar link",photoDeleted:"Foto excluída",failedDeletePhoto:"Falha ao excluir foto",failedDeleteArchives:"Falha ao excluir arquivos",failedUpdateFavorites:"Falha ao atualizar favoritos",exportDownloaded:"Exportação baixada",exportFailed:"Falha na exportação"},menu:{print:"Imprimir",schedule:"Agendar",openInBambuStudio:"Abrir no Slicer",slice:"Fatiar",externalLink:"Link externo",viewOnMakerWorld:"Ver no MakerWorld",preview3d:"Pré-visualização 3D",viewTimelapse:"Ver Timelapse",scanForTimelapse:"Escanear Timelapse",uploadTimelapse:"Enviar Timelapse",removeTimelapse:"Remover Timelapse",downloadSource3mf:"Baixar Source 3MF",uploadSource3mf:"Enviar Source 3MF",replaceSource3mf:"Substituir Source 3MF",removeSource3mf:"Remover Source 3MF",uploadF3d:"Enviar F3D",replaceF3d:"Substituir F3D",downloadF3d:"Baixar F3D",removeF3d:"Remover F3D",download:"Baixar",copyDownloadLink:"Copiar link de download",qrCode:"Qr Code",viewPhotos:"Ver fotos",viewPhotosCount:"Ver fotos ({{count}})",projectPage:"Página do projeto",addToFavorites:"Adicionar aos favoritos",removeFromFavorites:"Remover dos favoritos",edit:"Editar",goToProject:"Ir para o projeto: {{name}}",addToProject:"Adicionar ao projeto",removeFromProject:"Remover do projeto",loading:"Carregando...",noProjectsAvailable:"Nenhum projeto disponível",searchProjects:"Search projects…",select:"Selecionar",deselect:"Desmarcar",delete:"Excluir"},permission:{noReprint:"Você não tem permissão para reimprimir este arquivo",noAddToQueue:"Você não tem permissão para adicionar à fila",noUpdateArchives:"Você não tem permissão para atualizar arquivos",noUploadFiles:"Você não tem permissão para enviar arquivos",noDownload:"Você não tem permissão para baixar arquivos",noCopyLink:"Você não tem permissão para copiar links de download",noDelete:"Você não tem permissão para excluir este arquivo",noCreate:"Você não tem permissão para criar arquivos"},platePicker:{title:"Selecione a placa para visualizar",hint:"Este arquivo contém várias placas. Escolha uma para abrir no visualizador GCode.",plateLabel:"Placa {{index}}",objectCount:"{{count}} objeto",objectCount_plural:"{{count}} objetos",noGcode:"Este arquivo não contém G-code fatiado para visualizar. Abra-o no Bambu Studio para fatiar primeiro."},card:{previousPlate:"Placa anterior",nextPlate:"Próxima placa",plateNumber:"Placa {{index}}",moreOptions:"Clique com o botão direito para mais opções",addToFavorites:"Adicionar aos favoritos",removeFromFavorites:"Remover dos favoritos",cancelled:"cancelado",failed:"falha",duplicate:"duplicado",duplicateTitle:"Este modelo já foi impresso antes",openSource3mf:"Abrir source 3MF no Bambu Studio (clique com o botão direito para mais opções)",downloadF3d:"Baixar arquivo de design do Fusion 360",viewTimelapse:"Ver timelapse",viewPhoto:"Ver 1 foto",viewPhotos:"Ver {{count}} fotos",openFolder:"Abrir pasta: {{name}}",slicedFile:"Arquivo fatiado - pronto para imprimir",sourceFile:"Apenas arquivo fonte - nenhum mapeamento AMS disponível",gcode:"GCODE",source:"SOURCE",project:"Projeto: {{name}}",estimated:"Estimado: {{time}}",actual:"Real: {{time}}",accuracy:"Precisão: {{percent}}%",filament:"{{weight}}g",layer:"{{count}} camada",layers:"{{count}} camadas",object:"{{count}} objeto",objects:"{{count}} objetos",slicedFor:"Fatiado para {{model}}",uploadedBy:"Enviado por",noPermissionReprint:"Você não tem permissão para reimprimir",noFileForReprint:"Nenhum arquivo 3MF disponível — o arquivo não pôde ser baixado da impressora quando a impressão foi registrada",noPermissionEdit:"Você não tem permissão para editar arquivos",noPermissionDelete:"Você não tem permissão para excluir arquivos",reprint:"Reimprimir",schedulePrint:"Agendar impressão",schedule:"Agendar",openInBambuStudio:"Abrir no Bambu Studio",openInBambuStudioToSlice:"Abrir no Bambu Studio para fatiar",slice:"Fatiar",externalLink:"Link externo",makerWorld:"MakerWorld: {{designer}}",viewProject:"Ver projeto",noExternalLink:"Nenhum link externo",preview3d:"Visualização 3D",download:"Baixar",edit:"Editar",delete:"Excluir"},modal:{deleteArchive:"Excluir Arquivo",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"? Esta ação não pode ser desfeita.',deleteButton:"Excluir",removeSource3mf:"Remover Source 3MF",removeSource3mfConfirm:'Tem certeza de que deseja remover o arquivo source 3MF de "{{name}}"? Isso excluirá o arquivo original do projeto do fatiador.',removeButton:"Remover",removeF3d:"Remover F3D",removeF3dConfirm:'Tem certeza de que deseja remover o arquivo de design do Fusion 360 de "{{name}}"?',removeTimelapse:"Remover Timelapse",removeTimelapseConfirm:'Tem certeza de que deseja remover o vídeo timelapse de "{{name}}"?',timelapse:"{{name}} - Timelapse",selectTimelapse:"Selecionar Timelapse",selectTimelapseDesc:"Nenhuma correspondência automática encontrada. Selecione o timelapse para esta impressão:",deleteArchives:"Excluir Arquivos",deleteArchivesConfirm:"Tem certeza de que deseja excluir {{count}} arquivo(s)? Esta ação não pode ser desfeita.",deleteCount:"Excluir {{count}}"},page:{title:"Arquivos",printsCount:"{{filtered}} de {{total}} impressões",dropFilesHere:"Solte arquivos .3mf aqui",releaseToUpload:"Solte para enviar",only3mfSupported:"Apenas arquivos .3mf são suportados",close:"Fechar",selected:"{{count}} selecionado(s)",selectAll:"Selecionar Todos",tags:"Tags",project:"Projeto",favorite:"Favorito",delete:"Excluir",toggledFavorites:"Favoritos alternados para {{count}} arquivo(s)",failedUpdateFavorites:"Falha ao atualizar favoritos",archivesDeleted:"{{count}} arquivo(s) excluído(s)",failedDeleteArchives:"Falha ao excluir arquivos",photoDeleted:"Foto excluída",failedDeletePhoto:"Falha ao excluir foto"},list:{name:"Nome",printer:"Impressora",date:"Data",size:"Tamanho",actions:"Ações",hasTimelapse:"Possui timelapse"},log:{date:"Data",printName:"Nome da Impressão",printer:"Impressora",user:"Usuário",status:"Status",duration:"Duração",filament:"Filamento",allPrinters:"Todas as Impressoras",allUsers:"Todos os Usuários",allStatuses:"Todos os Status",cancelled:"Cancelado",skipped:"Ignorado",dateFrom:"De",dateTo:"Até",noEntries:"Nenhuma entrada de registro de impressão encontrada",showing:"Mostrando {{count}} de {{total}} entradas",rowsPerPage:"Linhas",page:"Página",prev:"Anterior",next:"Próxima",clearLog:"Limpar Registro",clearLogTitle:"Limpar Registro de Impressão",clearLogConfirm:"Todas as entradas do registro de impressão serão permanentemente excluídas. Arquivos e itens da fila não serão afetados. Esta ação não pode ser desfeita. Tem certeza?",clearLogButton:"Limpar Tudo",cleared:"{{count}} entradas do registro de impressão limpas",clearFailed:"Falha ao limpar o registro de impressão"}},queue:{title:"Fila de Impressão",subtitle:"Agende e gerencie seus trabalhos de impressão",addToQueue:"Adicionar à Fila",print:"Imprimir",reprint:"Reimprimir",schedulePrint:"Agendar Impressão",editQueueItem:"Editar Item da Fila",printToPrinters:"Imprimir para {{count}} Impressoras",queueToPrinters:"Adicionar à Fila para {{count}} Impressoras",queueSelectedPlates:"Adicionar {{count}} placas à fila",selectAllPlates:"Selecionar todas as {{count}} placas",deselectAll:"Desmarcar tudo",printQueued:"Impressão adicionada à fila",itemsQueued:"{{count}} itens adicionados à fila",sending:"Enviando...",sendingProgress:"Enviando {{current}}/{{total}}...",adding:"Adicionando...",addingProgress:"Adicionando {{current}}/{{total}}...",savingProgress:"Salvando {{current}}/{{total}}...",clearQueue:"Limpar Fila",clearHistory:"Limpar Histórico",emptyQueue:"Fila vazia",position:"Posição",scheduledTime:"Hora Agendada",moveUp:"Mover para Cima",moveDown:"Mover para Baixo",startNow:"Iniciar Agora",printingInProgress:"Impressão em andamento...",viewArchive:"Ver Arquivo",viewInFileManager:"Ver no Gerenciador de Arquivos",itemCount:"{{count}} item",itemCount_plural:"{{count}} itens",dragToReorder:"Arraste para reordenar (apenas ASAP)",reorderHint:"A posição afeta apenas itens ASAP. Itens agendados são executados no horário definido.",sjf:{label:"SJF",tooltip:"Trabalho mais curto primeiro — o agendador prioriza impressões mais curtas"},addedBy:"Adicionado por {{name}}",nextInQueue:"Próximo na fila",clearPlateSuccess:"Placa limpa — pronta para a próxima impressão",plateNumber:"Placa {{index}}",quantity:"Quantidade",quantityHint:"Cria {{count}} itens na fila",activeBatches:"Lotes ativos",batchProgress:"{{completed}} de {{total}} concluídos",cancelBatch:"Cancelar restantes",batchCancelled:"Itens restantes do lote cancelados",cancelBatchConfirmTitle:"Cancelar lote",cancelBatchConfirmMessage:"Cancelar todos os itens pendentes restantes neste lote?",batch:"Lote",sections:{currentlyPrinting:"Imprimindo Atualmente",queued:"Na Fila",history:"Histórico"},status:{pending:"Pendente",waiting:"Aguardando",printing:"Imprimindo",paused:"Pausado",completed:"Concluído",failed:"Falhou",skipped:"Ignorado",cancelled:"Cancelado"},summary:{printing:"Imprimindo",queued:"Na Fila",totalTime:"Tempo Total da Fila",totalWeight:"Peso Total da Fila",history:"Histórico"},filter:{allPrinters:"Todas as Impressoras",unassigned:"Não Atribuído",allStatus:"Todos os Status",allLocations:"Todos os Locais",any:"Qualquer"},sort:{byPosition:"Ordenar por Posição",byName:"Ordenar por Nome",byPrinter:"Ordenar por Impressora",bySchedule:"Ordenar por Agendamento",byDate:"Ordenar por Data",ascendingOldest:"Crescente (mais antigo primeiro)",descendingNewest:"Decrescente (mais recente primeiro)"},badges:{staged:"Preparado (início manual)",requiresPrevious:"Requer sucesso anterior",autoPowerOff:"Desligamento automático",gcodeInjection:"G-code"},empty:{title:"Nenhuma impressão agendada",description:'Agende uma impressão a partir da página de Arquivos usando a opção "Agendar" no menu de contexto, ou arraste e solte arquivos para começar.'},time:{asap:"ASAP",overdue:"Atrasado",now:"Agora",lessThanMinute:"Em menos de um minuto",inMinutes:"Em {{count}} min",inHours:"Em {{count}} horas"},actions:{stopPrint:"Parar Impressão",startPrint:"Iniciar Impressão",requeue:"Reenfileirar"},bulkEdit:{title:"Editar {{count}} Item",title_plural:"Editar {{count}} Itens",description:"Apenas as configurações alteradas serão aplicadas aos itens selecionados.",printer:"Impressora",noChange:"— Sem alterações —",queueOptions:"Opções de Fila",staged:"Preparado (início manual)",autoPowerOff:"Desligamento automático após impressão",requirePrevious:"Requer sucesso anterior",printOptions:"Opções de Impressão",bedLevelling:"Nivelamento da Mesa",flowCalibration:"Calibração de Fluxo",vibrationCalibration:"Calibração de Vibração",layerInspection:"Inspeção da Primeira Camada",timelapse:"Timelapse",useAms:"Usar AMS",applyChanges:"Aplicar Alterações",selectAll:"Selecionar Todos",deselectAll:"Desmarcar Todos",selected:"{{count}} selecionado(s)",editSelected:"Editar Selecionados",cancelSelected:"Cancelar Selecionados"},confirm:{cancelTitle:"Cancelar Impressão Agendada",cancelMessage:'Tem certeza de que deseja cancelar "{{name}}"?',stopTitle:"Parar Impressão",stopMessage:'Tem certeza de que deseja parar a impressão atual "{{name}}"? Isso cancelará o trabalho de impressão na impressora.',removeTitle:"Remover do Histórico",removeMessage:'Tem certeza de que deseja remover "{{name}}" do histórico da fila?',clearHistoryTitle:"Limpar Histórico",clearHistoryMessage:"Tem certeza de que deseja remover todos os {{count}} itens do histórico?",cancelButton:"Cancelar Impressão",stopButton:"Parar Impressão",thisPrint:"esta impressão",thisItem:"este item"},toast:{cancelled:"Item da fila cancelado",cancelFailed:"Falha ao cancelar item",removed:"Item da fila removido",removeFailed:"Falha ao remover item",stopped:"Impressão parada",stopFailed:"Falha ao parar impressão",released:"Impressão liberada para a fila",startFailed:"Falha ao iniciar impressão",reorderFailed:"Falha ao reordenar fila",historyCleared:"Limpar {{count}} item(s) do histórico",clearHistoryFailed:"Falha ao limpar histórico",updateFailed:"Falha ao atualizar itens",bulkCancelled:"Cancelado {{count}} item(s)",bulkCancelFailed:"Falha ao cancelar itens"},timeline:{listView:"Lista",timelineView:"Linha do tempo",unassigned:"Não atribuído",noData:"Nenhuma impressão agendada para este dia",allDoneBy:"Todas as impressões concluídas até {{time}}",staged:"Preparado",filterAll:"Mostrar tudo",filterPrinting:"Imprimindo",filterQueued:"Na fila",time:{anyMoment:"a qualquer momento",minutesLeft:"{{minutes}}m restantes",hoursLeft:"{{hours}}h restantes",hoursMinutesLeft:"{{hours}}h {{minutes}}m restantes"},day:{previous:"Dia anterior",next:"Próximo dia",today:"Hoje"}},permissions:{noStopPrint:"Você não tem permissão para parar impressões",noStartPrint:"Você não tem permissão para iniciar impressões",noEdit:"Você não tem permissão para editar este item da fila",noCancel:"Você não tem permissão para cancelar este item da fila",noRequeue:"Você não tem permissão para reenfileirar itens",noRemove:"Você não tem permissão para remover este item da fila",noClearHistory:"Você não tem permissão para limpar todo o histórico",noEditItems:"Você não tem permissão para editar itens da fila",noCancelItems:"Você não tem permissão para cancelar itens da fila"}},backgroundDispatch:{unknownFile:"Unknown file",unknownPrinter:"Unknown printer",startingPrints:"Starting prints",progressSummary:"{{complete}}/{{total}} complete • Dispatched: {{dispatched}} • Processing: {{processing}}",expandDetails:"Expand dispatch details",collapseDetails:"Collapse dispatch details",dismissToast:"Dismiss dispatch toast",cancelDispatchJob:"Cancel dispatch job",cancel:"Cancel",cancelling:"Cancelling…",awaitingPrinter:"Aguardando impressora…",status:{dispatched:"Dispatched",processing:"Processing",completed:"Completed",failed:"Failed",cancelled:"Cancelled"},toast:{cancellingUpload:"Cancelling upload...",cancelled:"Dispatch cancelled",cancelFailed:"Failed to cancel dispatch",completeWithFailures:"Background dispatch complete: {{completed}} succeeded, {{failed}} failed",completeSuccess:"Background dispatch complete: {{completed}} succeeded",printStartedRemaining:"{{completed}} impressão(ões) iniciada(s), {{remaining}} enviando..."}},stats:{title:"Dashboard",subtitle:"Arraste os widgets para reorganizar. Clique no ícone de olho para ocultar.",overview:"Visão Geral",totalPrints:"Total de Impressões",successRate:"Taxa de Sucesso",totalPrintTime:"Tempo Total de Impressão",printTime:"Tempo de Impressão",totalFilament:"Filamento Total Utilizado",filamentUsed:"Filamento Utilizado",filamentCost:"Custo do Filamento",totalCost:"Custo Total",energyUsed:"Energia Utilizada",energyCost:"Custo da Energia",energyWarmingUpTooltip:"O monitoramento de energia ainda está coletando snapshots por hora. Os totais por período ficarão precisos quando houver pelo menos um snapshot antes do intervalo selecionado. Valores iniciais podem ser subestimados.",averagePrintTime:"Tempo Médio de Impressão",printsPerDay:"Impressões por Dia",byPrinter:"Por Impressora",printsByPrinter:"Impressões por Impressora",byMaterial:"Por Material",byMonth:"Por Mês",last7Days:"Últimos 7 Dias",last30Days:"Últimos 30 Dias",last90Days:"Últimos 90 Dias",allTime:"Todo o Tempo",quickStats:"Estatísticas Rápidas",printActivity:"Atividade de Impressão",filamentTypes:"Tipos de Filamento",filamentTrends:"Tendências de Filamento",failureAnalysis:"Análise de Falhas",timeAccuracy:"Precisão do Tempo",successful:"Bem-sucedido:",failed:"Falhou:",perfectEstimate:"100% = estimativa perfeita",noTimeAccuracyData:"Nenhum dado de precisão de tempo disponível",noFilamentData:"Nenhum dado de filamento disponível",noPrinterData:"Nenhum dado de impressora disponível",noPrintData:"Nenhum dado de impressão disponível",noPrintDataLast30Days:"Nenhum dado de impressão nos últimos 30 dias",failureReasons:"Razões de Falha",topFailureReasons:"Principais Razões de Falha",failedPrintsCount:"{{failed}} / {{total}} impressões falharam",lastWeekRate:"Última semana: {{rate}}%",resetLayout:"Redefinir Layout",recalculateCosts:"Recalcular Custos",recalculateCostsHint:"Recalcular todos os custos do arquivo usando os preços atuais do filamento",exportStats:"Exportar Estatísticas",exportAsCsv:"Exportar como CSV",exportAsExcel:"Exportar como Excel",hiddenCount:"{{count}} Oculto",exportDownloaded:"Exportação baixada",exportFailed:"Falha na exportação",layoutReset:"Layout redefinido",recalculatedCosts:"Custos recalculados para {{count}} arquivos",recalculateFailed:"Falha ao recalcular custos",loadingStats:"Carregando estatísticas...",noPermissionResetLayout:"Você não tem permissão para redefinir o layout",noPermissionRecalculate:"Você não tem permissão para recalcular custos",noPrintDataInRange:"Sem dados no período selecionado",periodFilament:"Filamento usado",periodCost:"Custo",avgPerPrint:"Média por impressão",usageOverTime:"Uso ao longo do tempo",filamentByWeight:"Peso",printDuration:"Duração da impressão",printerUtilization:"Utilização da impressora",filamentSuccess:"Sucesso por material",printHabits:"Hábitos de impressão",printTimeOfDay:"Horário de impressão",colorDistribution:"Distribuição de cores",noColorData:"Nenhum dado de cor disponível",records:"Recordes",longestPrint:"Impressão mais longa",heaviestPrint:"Impressão mais pesada",mostExpensivePrint:"Mais cara",busiestDay:"Dia mais movimentado",successStreak:"Sequência de sucesso",streakPrint:"impressão consecutiva",streakPrints:"{{count}} impressões consecutivas",printerStats:"Estatísticas da impressora",hours:"horas",avgPrints:"Méd. impressões",noArchiveData:"Nenhum dado de impressão disponível",filamentByTime:"Tempo",avgWeight:"Méd. peso",avgTime:"Méd. tempo",filamentByPrints:"Impressões",timeframe:{today:"Hoje","this-week":"Esta semana","this-month":"Este mês","last-7":"Últimos 7 dias","last-30":"Últimos 30 dias","last-90":"Últimos 90 dias","this-year":"Este ano","all-time":"Todo o período",custom:"Personalizado",from:"De",to:"Até"},allUsers:"Todos os Usuários",noUser:"Sem Usuário (Sistema)",filterByUser:"Filtrar por Usuário"},maintenance:{title:"Manutenção",overview:"Visão Geral",allOk:"Todas as manutenções estão em dia",dueCount:"{{count}} item pendente",dueCount_plural:"{{count}} itens pendentes",warningCount:"{{count}} aviso",warningCount_plural:"{{count}} avisos",totalPrintTime:"Tempo Total de Impressão",nextMaintenance:"Próxima Manutenção",nothingDue:"Nada pendente",tasks:"Tarefas",lastPerformed:"Última execução",interval:"Intervalo",hoursRemaining:"{{hours}}h restantes",hoursOverdue:"{{hours}}h atrasadas",markDone:"Marcar como Concluída",performMaintenance:"Realizar Manutenção",history:"Histórico",noHistory:"Nenhum histórico de manutenção",editPrintHours:"Editar Horas de Impressão",currentHours:"Horas Atuais",statusTab:"Status",settingsTab:"Configurações",overdueCount:"{{count}} atrasado",dueSoonCount:"{{count}} prestes a vencer",dueSoon:"Prestes a vencer",allGood:"Tudo certo",overdueBy:"Atrasado por {{duration}}",dueIn:"Vence em {{duration}}",timeLeft:"{{duration}} restantes",day:"1 dia",days:"{{count}} dias",week:"1 semana",weeks:"{{count}} semanas",month:"1 mês",months:"{{count}} meses",year:"1 ano",maintenanceTypes:"Tipos de Manutenção",maintenanceTypesDescription:"Tipos de sistema e suas tarefas de manutenção personalizadas",addCustomType:"Adicionar Tipo Personalizado",restoreDefaults:"Restaurar Tarefas Padrão",intervalType:"Tipo de Intervalo",intervalValue:"Intervalo ({{type}})",icon:"Icon",documentationLink:"Link da Documentação (opcional)",assignToPrinters:"Atribuir a Impressoras",selectAtLeastOnePrinter:"Selecione pelo menos uma impressora",addType:"Adicionar Tipo",custom:"Personalizado",printHours:"Horas de Impressão",calendarDays:"Dias de Calendário",exampleName:"ex., Substituir Filtro HEPA",viewDocumentation:"Ver documentação",timeBasedInterval:"Intervalo baseado em tempo",intervalOverrides:"Substituições de Intervalo",intervalOverridesDescription:"Personalize os intervalos para impressoras específicas",assignedToPrinters:"Atribuído a impressoras:",noPrintersAssigned:"Nenhuma impressora atribuída",addPrinterShort:"Adicionar:",printersAssignedClick:"{{count}} impressora(s) atribuída(s) - clique para gerenciar",removeFromPrinter:"Remover desta impressora",types:{lubricateCarbonRods:"Lubricar Barras de Carbono",lubricateRails:"Lubricar Trilhos Lineares",cleanNozzle:"Limpar Bico/Hotend",checkBelts:"Verificar Tensão das Correias",cleanBuildPlate:"Limpar Plataforma de Impressão",checkExtruder:"Verificar Engrenagens do Extrusor",checkCooling:"Verificar Ventiladores de Resfriamento",generalInspection:"Inspeção Geral",cleanCarbonRods:"Limpar Barras de Carbono",lubricateSteelRods:"Lubrificar Barras de Aço",cleanSteelRods:"Limpar Barras de Aço",cleanLinearRails:"Limpar Trilhos Lineares",checkPtfeTube:"Verificar Tubo PTFE",replaceHepaFilter:"Substituir Filtro HEPA",replaceCarbonFilter:"Substituir Filtro de Carbono",lubricateLeftNozzleRail:"Lubrificar Trilho do Bico Esquerdo"},maintenanceComplete:"Manutenção marcada como concluída",typeUpdated:"Tipo de manutenção atualizado",typeDeleted:"Tipo de manutenção excluído",defaultsRestored:"Restauradas {{count}} tarefa(s) padrão",printHoursUpdated:"Horas de impressão atualizadas",printerAssigned:"Impressora atribuída",printerRemoved:"Impressora removida",deleteTypeConfirm:'Excluir "{{name}}"?',deleteSystemTypeTitle:"Excluir tarefa de manutenção padrão?",deleteSystemTypeMessage:'Tem certeza de que deseja excluir a tarefa de manutenção padrão "{{name}}"?',noPermissionUpdate:"Você não tem permissão para atualizar itens de manutenção",noPermissionPerform:"Você não tem permissão para realizar manutenção",noPermissionEditTypes:"Você não tem permissão para editar tipos de manutenção",noPermissionDeleteTypes:"Você não tem permissão para excluir tipos de manutenção",noPermissionEditHours:"Você não tem permissão para editar horas de impressão",noPermissionRemovePrinter:"Você não tem permissão para remover atribuições de impressora",noPermissionAssignPrinter:"Você não tem permissão para atribuir impressoras",noPermissionEditIntervals:"Você não tem permissão para editar intervalos",configureSettings:"Configure tipos de manutenção e intervalos"},settings:{title:"Configurações",general:"Geral",tabs:{general:"Geral",smartPlugs:"Tomadas Inteligentes",notifications:"Notificações",queue:"Workflow",filament:"Filamento",network:"Rede",apiKeys:"Chaves API",virtualPrinter:"Impressora Virtual",failureDetection:"Detecção de Falhas",users:"Autenticação",backup:"Backup",emailAuth:"Autenticação por Email",ldap:"LDAP",twoFa:"Autenticação 2FA",oidc:"SSO / OIDC",spoolbuddy:"SpoolBuddy"},ldap:{title:"Autenticação LDAP",enabledDesc:"A autenticação LDAP está ativada",disabledDesc:"A autenticação LDAP está desativada",disabledHint:"Configure e salve as configurações LDAP abaixo, depois ative.",enabled:"Autenticação LDAP ativada",disabled:"Autenticação LDAP desativada",feature1:"Usuários podem fazer login com credenciais LDAP",feature2:"A conta de administrador local permanece como fallback",feature3:"Grupos LDAP são mapeados para grupos BamBuddy no login",serverConfig:"Configuração do Servidor LDAP",serverUrl:"URL do servidor",serverUrlHint:"Use ldap:// para padrão ou ldaps:// para conexões SSL",security:"Segurança",securityHint:"StartTLS atualiza uma conexão simples para TLS. LDAPS usa TLS desde o início.",bindDn:"Bind DN (conta de serviço)",bindPassword:"Senha Bind",searchBase:"Base DN de pesquisa",userFilter:"Filtro de pesquisa de usuário",userFilterHint:"{username} é substituído pelo nome de usuário. Use (uid={username}) para OpenLDAP.",autoProvision:"Provisionamento automático de usuários",autoProvisionHint:"Criar automaticamente uma conta BamBuddy no primeiro login LDAP",defaultGroup:"Grupo padrão",defaultGroupNone:"— Nenhum (sem fallback) —",defaultGroupHint:"Grupo de fallback atribuído quando um usuário LDAP se autentica mas não está em nenhum grupo LDAP mapeado. Deixe vazio para manter usuários não mapeados sem permissões.",groupMapping:"Mapeamento de grupos (JSON)",groupMappingHint:"Mapear DNs de grupos LDAP para grupos BamBuddy. Grupos disponíveis: ",testConnection:"Testar conexão",settingsSaved:"Configurações LDAP salvas",errors:{serverRequired:"URL do servidor LDAP é obrigatória",searchBaseRequired:"Base DN de pesquisa é obrigatória",enableAuthFirst:"Ative a autenticação primeiro",configureLdapFirst:"Salve as configurações LDAP primeiro"}},email:{smtpSettings:"Configuração SMTP",smtpHost:"Servidor SMTP",smtpPort:"Porta SMTP",security:"Segurança",authentication:"Autenticação",username:"Nome de Usuário",password:"Senha",fromEmail:"Email de Remetente",fromName:"Nome de Remetente",testConnection:"Testar Conexão SMTP",testRecipient:"Email de Teste",sendTest:"Enviar Email de Teste",sending:"Enviando...",save:"Salvar Configurações",saving:"Salvando...",advancedAuth:"Autenticação Avançada",advancedAuthEnabled:"Autenticação Avançada está habilitada",advancedAuthEnabledDesc:"Recursos de gerenciamento de usuários baseados em email estão ativos. Novos usuários receberão senhas geradas automaticamente por email, e os usuários podem redefinir suas senhas através do recurso de esqueci minha senha.",advancedAuthDisabled:"Autenticação Avançada está desabilitada",advancedAuthDisabledDesc:"Habilite a autenticação avançada para ativar recursos baseados em email para gerenciamento de usuários.",enable:"Habilitar",disable:"Desabilitar",feature1:"Senhas são geradas automaticamente e enviadas por email para novos usuários",feature2:"Usuários podem fazer login com nome de usuário ou email",feature3:"Recurso de esqueci minha senha está disponível",feature4:"Administradores podem redefinir senhas de usuários via email",errors:{requiredFields:"Por favor, preencha todos os campos obrigatórios",usernameRequired:"Nome de usuário é obrigatório quando a autenticação está habilitada",enterTestEmail:"Por favor, insira um endereço de email de teste",smtpServerAndEmail:"Por favor, preencha o servidor SMTP e o email de remetente antes de testar",usernamePasswordRequired:"Nome de usuário e senha são obrigatórios quando a autenticação está habilitada",configureSmtpFirst:"Por favor, configure e teste as configurações SMTP primeiro",enableAuthFirst:"Por favor, habilite a autenticação primeiro para usar os recursos baseados em e-mail."},success:{settingsSaved:"Configurações SMTP salvas com sucesso"},securityOptions:{starttls:"STARTTLS (Porta 587)",ssl:"SSL/TLS (Porta 465)",none:"Nenhuma (Porta 25)"},authOptions:{enabled:"Habilitado",disabled:"Desabilitado"}},appearance:"Aparência",notifications:"Notificações",smartPlugs:"Tomadas Inteligentes",spoolman:"Spoolman",updates:"Atualizações",language:"Idioma",languageDescription:"Selecione seu idioma preferido",theme:"Tema",themeLight:"Claro",themeDark:"Escuro",themeSystem:"Sistema",defaultView:"Visualização Padrão",defaultViewDescription:"Página a ser exibida ao abrir o aplicativo",checkForUpdates:"Verificar Atualizações",autoUpdate:"Atualização Automática",currentVersion:"Versão Atual",latestVersion:"Última Versão",upToDate:"Você está atualizado",updateAvailable:"Atualização disponível",notificationLanguage:"Idioma das Notificações",notificationLanguageDescription:"Idioma para notificações push",bedCooledThreshold:"Limite de Resfriamento da Cama",bedCooledThresholdDescription:"Temperatura abaixo da qual a cama é considerada resfriada após uma impressão",userNotificationsEnabled:"Notificações do Usuário",userNotificationsEnabledDescription:"Ativa o menu de notificações do usuário e notificações por e-mail para eventos de impressão. Requer Autenticação Avançada.",userNotificationsDisabledHint:"Ative a Autenticação Avançada para usar as notificações do usuário.",notificationProviders:"Provedores de Notificação",addProvider:"Adicionar Provedor",editProvider:"Editar Provedor",providerType:"Tipo de Provedor",testNotification:"Testar Notificação",testSuccess:"Notificação de teste enviada com sucesso",testFailed:"Falha ao enviar notificação de teste",quietHours:"Horas de Silêncio",quietHoursDescription:"Não perturbe durante essas horas",quietHoursStart:"Início",quietHoursEnd:"Fim",events:{title:"Eventos de Notificação",printStart:"Impressão Iniciada",printComplete:"Impressão Concluída",printFailed:"Falha na Impressão",printStopped:"Impressão Interrompida",printProgress:"Marcos de Progresso",printProgressDescription:"Notificar em 25%, 50%, 75%",printerOffline:"Impressora Offline",printerError:"Erro na Impressora",filamentLow:"Filamento Baixo",maintenanceDue:"Manutenção Pendente",maintenanceDueDescription:"Notificar quando a manutenção for necessária"},smartPlug:{title:"Tomadas Inteligentes",add:"Adicionar Tomada Inteligente",edit:"Editar Tomada Inteligente",name:"Nome",ipAddress:"Endereço IP",linkedPrinter:"Impressora Vinculada",autoOn:"Ligar Automaticamente",autoOnDescription:"Ligar quando a impressão começar",autoOff:"Desligar Automaticamente",autoOffDescription:"Desligar após a conclusão da impressão",offDelay:"Atraso para Desligar",offDelayMinutes:"Minutos após a impressão",offDelayTemp:"Quando o bico estiver abaixo da temperatura",currentState:"Estado Atual",turnOn:"Ligar",turnOff:"Desligar"},filamentTracking:"Rastreamento de Filamento",filamentTrackingDesc:"Escolha como rastrear seus rolos de filamento. Você pode usar o inventário interno ou conectar a um servidor Spoolman externo.",filamentChecks:"Verificações de filamento",disableFilamentWarnings:"Desativar avisos de filamento",disableFilamentWarningsDesc:"Não mostrar avisos sobre filamento insuficiente ao imprimir ou adicionar à fila",preferLowestFilament:"Preferir filamento com menor resto",preferLowestFilamentDesc:"Quando vários carretéis correspondem, usar o com menos filamento restante",trackingModeBuiltIn:"Inventário Interno",trackingModeBuiltInDesc:"Correspondência automática de RFID e rastreamento de uso incluídos",trackingModeSpoolmanDesc:"Servidor de gerenciamento de filamento externo",builtInFeatureRfid:"Detecta automaticamente rolos RFID da Bambu Lab no AMS",builtInFeatureUsage:"Rastreia o consumo de filamento por impressão",builtInFeatureCatalog:"Gerencia rolos, cores e perfis de fator K",builtInFeatureThirdParty:"Rolos de terceiros podem ser atribuídos aos rolos do inventário",amsSyncButton:"Sincronizar Pesos do AMS",amsSyncTitle:"Sincronizar Pesos dos Rolos do AMS",amsSyncMessage:"Isso substituirá todos os pesos dos rolos do inventário pelos valores atuais de % restante do AMS das impressoras conectadas. Use isso para recuperar dados de peso corrompidos. As impressoras devem estar online.",amsSyncing:"Sincronizando...",amsSyncSuccess:"{{synced}} rolo(s) sincronizado(s), {{skipped}} ignorado(s)",amsSyncError:"Falha ao sincronizar pesos do AMS",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"URL do seu servidor Spoolman (por exemplo, http://localhost:7912)",spoolmanConnected:"Conectado",spoolmanDisconnected:"Desconectado",status:"Status",connect:"Conectar",disconnect:"Desconectar",howSyncWorks:"Como a Sincronização Funciona",syncInfoRfidOnly:"Apenas rolos oficiais da Bambu Lab com RFID são sincronizados",syncInfoAutoCreate:"Novos rolos são criados automaticamente no Spoolman na primeira sincronização",syncInfoThirdPartySkipped:"Rolos não oficiais da Bambu Lab (terceiros, reabastecidos) são ignorados",linkingExistingSpools:"Vinculando Rolos Existentes",linkingExistingSpoolsDesc:'Para vincular rolos existentes do Spoolman ao seu AMS, passe o mouse sobre um slot do AMS e clique em "Vincular ao Spoolman".',syncMode:"Modo de Sincronização",syncModeAuto:"Automático",syncModeManual:"Apenas Manual",syncModeAutoDesc:"Os dados do AMS são sincronizados automaticamente quando alterações são detectadas",syncModeManualDesc:"Somente sincronize quando acionado manualmente",syncAmsData:"Sincronizar Dados do AMS",syncAmsDataDesc:"Sincronize manualmente os dados do AMS da impressora com o Spoolman",allPrinters:"Todas as Impressoras",noDefaultPrinter:"Sem padrão (perguntar a cada vez)",sidebarOrder:"Ordem da barra lateral",saveThumbnails:"Salvar miniaturas",captureFinishPhoto:"Capturar foto de conclusão",noPrintersConfigured:"Nenhuma impressora configurada",archiveMode:{always:"Sempre criar entrada de arquivo",never:"Nunca criar entrada de arquivo",ask:"Perguntar a cada vez"},checkForUpdatesLabel:"Verificar atualizações",checkPrinterFirmware:"Verificar firmware da impressora",includeBetaUpdates:"Incluir versões beta",includeBetaUpdatesDesc:"Notificar sobre versões beta e pré-lançamento ao verificar atualizações",enableRetry:"Habilitar tentativa",homeAssistantDescription:"Controlar tomadas inteligentes via Home Assistant",environmentManagedLabel:"(Gerenciado pelo Ambiente)",autoEnabledViaEnv:"Habilitado automaticamente via variáveis de ambiente",urlFromEnvReadOnly:"Valor definido pela variável de ambiente HA_URL (somente leitura)",tokenFromEnvReadOnly:"Valor definido pela variável de ambiente HA_TOKEN (somente leitura)",mqttConnectedTo:"Conectado a",prometheusDescription:"Expor dados da impressora no formato Prometheus",noSmartPlugsTitle:"Nenhuma tomada inteligente configurada",noSmartPlugsDescription:"Adicione uma tomada inteligente baseada em Tasmota para monitorar o consumo de energia e automatizar o controle de energia.",noProvidersTitle:"Nenhum provedor configurado",noProvidersDescription:"Adicione um provedor para receber alertas.",noTemplatesAvailable:"Nenhum modelo disponível. Reinicie o backend para gerar os modelos padrão.",apiPermissionView:"Visualizar status da impressora e fila",apiPermissionEdit:"Adicionar e remover itens da fila de impressão",apiKeysEmptyTitle:"Nenhuma chave API",apiKeysEmptyDescription:"Crie uma chave API para integrar com serviços externos.",noUsersFound:"Nenhum usuário encontrado",noGroupsFound:"Nenhum grupo encontrado",noGroupsAvailable:"Nenhum grupo disponível",passwordsDoNotMatch:"As senhas não coincidem",systemGroupWarning:"Os nomes dos grupos do sistema não podem ser alterados",authDisabledTitle:"Autenticação Desativada",authDisabledFeature1:"Exigir login para acessar o sistema",authDisabledFeature2:"Criar múltiplos usuários com permissões baseadas em grupos",authDisabledFeature3:"Controlar acesso com mais de 50 permissões granulares",userHasCreated:"Este usuário criou:",userItemsQuestion:"O que você gostaria de fazer com esses itens?",deleteUserConfirm:"Tem certeza de que deseja excluir este usuário?",actionCannotBeUndone:"Esta ação não pode ser desfeita.",addFirstSmartPlug:"Adicione sua primeira tomada inteligente",providers:"Provedores",log:"Registro",testAll:"Testar tudo",testResults:"Resultados do teste",testPassedCount:"{{count}} aprovado",testFailedCount:"{{count}} falhou",messageTemplates:"Modelos de mensagem",messageTemplatesDescription:"Personalize as mensagens de notificação para cada evento.",apiKeys:"Chaves API",apiKeysDescription:"Crie chaves API para integrações externas e webhooks.",createKey:"Criar Chave",apiKeyCreated:"Chave API criada com sucesso",apiKeyCopyWarning:"Copie esta chave agora - ela não será exibida novamente!",useInApiBrowser:"Usar no Navegador API",createNewApiKey:"Criar Nova Chave API",keyName:"Nome da Chave",keyNamePlaceholder:"e.g., Home Assistant, OctoPrint",readStatus:"Status de Leitura",readStatusDescription:"Visualizar status da impressora e fila",manageQueue:"Gerenciar Fila",manageQueueDescription:"Adicionar e remover itens da fila de impressão",controlPrinter:"Controlar Impressora",controlPrinterDescription:"Pausar, retomar e parar impressões",unnamedKey:"Chave Sem Nome",lastUsed:"Último uso",read:"Ler",control:"Controlar",createFirstKey:"Crie sua primeira chave",webhookEndpoints:"Endpoints de Webhook",webhookApiKeyHint:"Use sua chave API no cabeçalho X-API-Key.",webhook:{getAllStatus:"Obter status de todas as impressoras",getSpecificStatus:"Obter status de uma impressora específica",addToQueue:"Adicionar à fila de impressão",pausePrint:"Pausar impressão",resumePrint:"Retomar impressão",stopPrint:"Parar impressão"},apiBrowser:"Navegador API",apiBrowserDescription:"Explore e teste todos os endpoints de API disponíveis.",apiKeyForTesting:"Chave API para Teste",apiKeyPlaceholder:"Cole sua chave API aqui para testar endpoints autenticados...",apiKeyHint:"Esta chave será enviada como cabeçalho X-API-Key nas solicitações.",deleteApiKeyTitle:"Excluir Chave API",deleteApiKeyMessage:"Tem certeza de que deseja excluir esta chave API? Quaisquer integrações usando esta chave deixarão de funcionar.",deleteKey:"Excluir Chave",amsDisplayThresholds:"Limiares de Exibição AMS",amsThresholdsDescription:"Configure os limiares de cores para os indicadores de umidade e temperatura do AMS.",humidity:"Umidade",goodGreen:"Bom (verde)",fairOrange:"Razoável (laranja)",aboveFairBad:"Acima do limiar razoável mostra como vermelho (ruim)",fairAlsoDryingThreshold:"Este limiar também é usado para acionar a secagem automática",temperature:"Temperatura",goodBlue:"Bom (azul)",aboveFairHot:"Acima do limiar razoável mostra como vermelho (quente)",historyRetention:"Retenção de Histórico",keepSensorHistory:"Manter histórico do sensor por",historyRetentionDescription:"Dados antigos de umidade e temperatura serão automaticamente excluídos",defaultPrintOptions:"Opções de impressão padrão",defaultPrintOptionsDescription:"Defina valores padrão para opções de impressão. Podem ser alterados no diálogo de impressão.",defaultBedLevelling:"Nivelamento da mesa",defaultBedLevellingDesc:"Nivelar automaticamente a mesa antes da impressão",defaultFlowCali:"Calibração de fluxo",defaultFlowCaliDesc:"Calibrar fluxo de extrusão",defaultVibrationCali:"Calibração de vibração",defaultVibrationCaliDesc:"Reduzir artefatos de ringing",defaultLayerInspect:"Inspeção da primeira camada",defaultLayerInspectDesc:"Inspeção IA da primeira camada",defaultTimelapse:"Timelapse",defaultTimelapseDesc:"Gravar vídeo timelapse",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"Confirmação de placa livre",requirePlateClear:"Exigir confirmação de placa livre",requirePlateClearDescription:'Quando ativado, o agendador aguarda uma confirmação de placa livre por impressora antes de iniciar impressões na fila em impressoras com trabalhos concluídos. Desativar isso também oculta o indicador de status da placa e o botão "Marcar placa como liberada" nos cartões das impressoras.',gcodeInjection:"Injeção de G-code",gcodeInjectionDescription:'Configure G-code personalizado para injetar no início e/ou no final das impressões para sistemas de impressão automática como Farmloop, SwapMod, AutoClear e Printflow 3D. Os snippets são configurados por modelo de impressora e aplicados quando "Injetar G-code" está ativado em um item da fila.',gcodeInjectionNoPrinters:"Nenhuma impressora encontrada. Adicione impressoras para configurar snippets de G-code.",gcodeStartLabel:"G-code inicial",gcodeEndLabel:"G-code final",gcodeStartPlaceholder:"G-code inserido antes do início da impressão...",gcodeEndPlaceholder:"G-code adicionado após o término da impressão...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"Secagem Automática",queueDryingDescription:"Secar automaticamente o filamento AMS quando a impressora estiver ociosa entre impressões na fila. Usa o limite de umidade acima.",queueDryingEnabled:"Ativar secagem automática",queueDryingEnabledDescription:"Iniciar secagem AMS automaticamente quando a impressora estiver ociosa e a umidade estiver acima do limite",queueDryingBlock:"Aguardar conclusão da secagem",queueDryingBlockDescription:"Bloquear a fila de impressão até a secagem terminar. Quando desativado, impressões têm prioridade.",ambientDryingEnabled:"Secagem ambiente",ambientDryingEnabledDescription:"Secar automaticamente o filamento em impressoras ociosas quando a umidade exceder o limite, mesmo sem impressões na fila.",dryingPresets:"Predefinições de secagem",dryingPresetsDescription:"Temperatura e duração por tipo de filamento. AMS 2 Pro usa temperaturas mais baixas, AMS-HT suporta temperaturas mais altas.",dryingFilament:"Filamento",printModal:"Modal de Impressão",expandCustomMapping:"Expandir mapeamento personalizado por padrão",expandCustomMappingDescription:"Ao imprimir em várias impressoras, mostrar o mapeamento AMS por impressora expandido",authentication:"Autenticação",authEnabledDescription:"Sua instância está protegida com autenticação de usuário",authDisabledDescription:"Ative para exigir login e gerenciar o acesso dos usuários",authDisabledMessage:"Ative a autenticação para criar contas de usuário, gerenciar permissões e proteger sua instância do Bambuddy.",enableAuthentication:"Ativar Autenticação",currentUser:"Usuário Atual",changePassword:"Alterar Senha",admin:"Administrador",users:"Usuários",addUser:"Adicionar Usuário",groups:"Grupos",addGroup:"Adicionar Grupo",system:"Sistema",noDescription:"Sem descrição",userCount:"{{count}} usuários",permissionCount:"{{count}} permissões",createUser:"Criar Usuário",username:"Nome de Usuário",enterUsername:"Digite o nome de usuário",password:"Senha",enterPassword:"Digite a senha (mínimo 6 caracteres)",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a senha",viewReleaseOnGitHub:"Ver lançamento no GitHub",turnAllPlugsOn:"Ligar todas as tomadas",turnAllPlugsOff:"Desligar todas as tomadas",clearNotificationLogs:"Limpar Logs de Notificação",clearLogsMessage:"Isso excluirá permanentemente todos os logs de notificação com mais de 30 dias. Esta ação não pode ser desfeita.",clearLogs:"Limpar Logs",resetUiPreferences:"Redefinir Preferências de UI",resetUiPreferencesMessage:"Isso redefinirá todas as preferências de UI para os padrões: ordem da barra lateral, tema, layout do painel, modos de exibição e preferências de classificação. Suas impressoras, arquivos e configurações do servidor NÃO serão afetados. A página será recarregada após a limpeza.",resetPreferences:"Redefinir Preferências",deleteGroupTitle:"Excluir Grupo",deleteGroupMessage:"Tem certeza de que deseja excluir este grupo? Usuários neste grupo perderão essas permissões.",deleteGroup:"Excluir Grupo",disableAuthenticationTitle:"Desativar Autenticação",disableAuthenticationMessage:"Tem certeza de que deseja desativar a autenticação? Isso tornará sua instância do Bambuddy acessível sem login. Todos os usuários permanecerão no banco de dados, mas a autenticação será desativada.",disableAuthentication:"Desativar Autenticação",configureBambuddy:"Configurar Bambuddy",systemDefault:"Padrão do Sistema",archiveSettings:"Configurações de Arquivo",newWindow:"Nova Janela",embeddedOverlay:"Sobreposição Incorporada",preferredSlicer:"Fatiador Preferido",preferredSlicerDescription:"Escolha qual aplicativo de fatiamento abrirá os arquivos",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"Câmeras Externas",costTracking:"Rastreamento de Custos",printsOnly:"Apenas Impressões",totalConsumption:"Consumo Total",dataManagement:"Gerenciamento de Dados",storageUsage:"Uso de Armazenamento",storageUsageDescription:"Detalhamento do uso de dados por categoria",storageUsageTotal:"Total",storageUsageErrors:"Erros",storageUsageOtherBreakdown:"Outros (inclui ativos estáticos, scripts e arquivos de configuração)",storageUsageSystem:"Sistema",storageUsageData:"Dados",storageUsageUnavailable:"Informações de uso de armazenamento indisponíveis",clearNotificationLogsDescription:"Excluir logs de notificação com mais de 30 dias",resetUiPreferencesDescription:"Redefinir ordem da barra lateral, tema, modos de exibição e preferências de layout. Impressoras, arquivos e configurações não são afetados.",enableHomeAssistant:"Ativar Home Assistant",enableMqtt:"Ativar MQTT",useTls:"Usar TLS",enableMetricsEndpoint:"Ativar Endpoint de Métricas",availableMetrics:"Métricas Disponíveis",editUser:"Editar Usuário",deleteUserTitle:"Excluir Usuário",groupName:"Nome do Grupo",leaveEmptyForAnonymous:"Deixe vazio para anônimo",leaveEmptyForNoAuth:"Deixe vazio para sem autenticação",enterNewPassword:"Digite a nova senha",confirmNewPassword:"Confirme a nova senha",enterGroupName:"Digite o nome do grupo",enterDescriptionOptional:"Digite a descrição (opcional)",enterCurrentPassword:"Digite a senha atual",enterNewPasswordMin6:"Digite a nova senha (mínimo 6 caracteres)",toast:{keyCopied:"Chave copiada para a área de transferência",copyFailed:"Falha ao copiar a chave",keyAddedToBrowser:"Chave adicionada ao Navegador de API",clearLogsFailed:"Falha ao limpar logs",uiPreferencesReset:"Preferências de UI redefinidas. Atualizando...",authDisabled:"Autenticação desativada com sucesso",authDisableFailed:"Falha ao desativar a autenticação",apiKeyCreated:"Chave de API criada",apiKeyDeleted:"Chave de API excluída",userCreated:"Usuário criado com sucesso",userUpdated:"Usuário atualizado com sucesso",userDeleted:"Usuário excluído com sucesso",groupCreated:"Grupo criado com sucesso",groupUpdated:"Grupo atualizado com sucesso",groupDeleted:"Grupo excluído com sucesso",fillRequiredFields:"Por favor, preencha todos os campos obrigatórios",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres",enterGroupName:"Por favor, insira um nome de grupo",settingsSaved:"Configurações salvas",noPermissionUpdate:"Você não tem permissão para alterar as configurações",cameraSettingsSaved:"Configurações da câmera salvas",enterCameraUrl:"Por favor, insira a URL da câmera",passwordChanged:"Senha alterada com sucesso",connectionFailed:"Falha na conexão",testFailed:"Falha no teste",cameraConnected:"Câmera conectada{{resolution}}"},testConnection:"Testar Conexão",catalog:{spoolCatalog:"Catálogo de Carretéis",spoolCatalogDescription:"Pesos de carretéis vazios por marca/tipo. Usado para pesquisa automática de peso ao adicionar carretéis.",searchCatalog:"Pesquisar no catálogo...",addNewEntry:"Adicionar Nova Entrada",namePlaceholder:"Nome (ex.: Bambu Lab - Plástico)",weight:"Peso",type:"Tipo",default:"Padrão",custom:"Personalizado",noMatch:"Nenhuma entrada corresponde à sua pesquisa",empty:"Nenhuma entrada no catálogo",deleteEntry:"Excluir Entrada",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',resetCatalog:"Redefinir Catálogo",resetConfirm:"Redefinir catálogo para os padrões? Isso removerá todas as entradas personalizadas.",loadFailed:"Falha ao carregar o catálogo de carretéis",nameWeightRequired:"Nome e peso são obrigatórios",entryAdded:"Entrada adicionada",addFailed:"Falha ao adicionar entrada",entryUpdated:"Entrada atualizada",updateFailed:"Falha ao atualizar entrada",entryDeleted:"Entrada excluída",deleteFailed:"Falha ao excluir entrada",resetSuccess:"Catálogo redefinido para os padrões",resetFailed:"Falha ao redefinir catálogo",exported:"Exportadas {{count}} entradas",imported:"Importadas {{added}} entradas ({{skipped}} ignoradas)",importFailed:"Falha ao importar: formato JSON inválido",exportTooltip:"Exportar catálogo para JSON",importTooltip:"Importar catálogo de JSON",resetTooltip:"Redefinir para os padrões",selectedCount:"{{count}} selecionados",deleteSelected:"Excluir Selecionados",bulkDeleteConfirm:"Tem certeza de que deseja excluir {{count}} entradas?",bulkDeleted:"{{count}} entradas excluídas",bulkDeleteFailed:"Falha ao excluir entradas"},colorCatalog:{title:"Catálogo de Cores",description:"Cores de filamento por fabricante/material. Usado para pesquisa automática de cores ao adicionar carretéis.",searchColors:"Pesquisar cores...",allManufacturers:"Todos os fabricantes",addNewColor:"Adicionar Nova Cor",manufacturer:"Fabricante",colorName:"Nome da Cor",hex:"Hex",materialOptional:"Material (opcional)",showing:"Mostrando {{filtered}} de {{total}} cores",noMatch:"Nenhuma cor corresponde à sua pesquisa",empty:"Nenhuma cor no catálogo",deleteColor:"Excluir Cor",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',resetCatalog:"Redefinir Catálogo de Cores",resetConfirm:"Redefinir catálogo para os padrões? Isso removerá todas as cores personalizadas.",sync:"Sincronizar",starting:"Iniciando...",syncTooltip:"Sincronizar do FilamentColors.xyz (2000+ cores, pode levar um minuto)",loadFailed:"Falha ao carregar o catálogo de cores",fieldsRequired:"Fabricante, nome da cor e cor hex são obrigatórios",colorAdded:"Cor adicionada",addFailed:"Falha ao adicionar cor",colorUpdated:"Cor atualizada",updateFailed:"Falha ao atualizar cor",colorDeleted:"Cor excluída",deleteFailed:"Falha ao excluir cor",resetSuccess:"Catálogo de cores redefinido para os padrões",resetFailed:"Falha ao redefinir catálogo",syncUpToDate:"Já está atualizado ({{count}} cores verificadas)",syncComplete:"Adicionadas {{added}} novas cores ({{skipped}} já existiam)",syncError:"Erro de sincronização",syncFailed:"Falha ao sincronizar do FilamentColors.xyz",exported:"Exportadas {{count}} cores",imported:"Importadas {{added}} cores ({{skipped}} ignoradas)",importFailed:"Falha ao importar: formato JSON inválido",selectedCount:"{{count}} selecionados",deleteSelected:"Excluir Selecionados",bulkDeleteConfirm:"Tem certeza de que deseja excluir {{count}} cores?",bulkDeleted:"{{count}} cores excluídas",bulkDeleteFailed:"Falha ao excluir cores"},dateFormat:"Formato de data",dateFormatUs:"US (MM/DD/AAAA)",dateFormatEu:"EU (DD/MM/AAAA)",dateFormatIso:"ISO (AAAA-MM-DD)",timeFormat:"Formato de hora",timeFormat12:"12 horas (3:30 PM)",timeFormat24:"24 horas (15:30)",defaultPrinter:"Impressora padrão",defaultPrinterDescription:"Pré-selecionar esta impressora para uploads, reimpressões e outras operações.",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"Arraste itens na barra lateral para reordenar. Restaurar ordem padrão aqui.",setDefault:"Definir padrão",sidebarOrderSetDefaultHint:"Definir padrão aplica a ordem atual do menu aos usuários que ainda não personalizaram o seu.",sidebarDefaultSet:"Ordem padrão do menu foi definida.",sidebarDefaultCleared:"Ordem padrão do menu removida.",sidebarDefaultFailed:"Falha ao definir a ordem padrão do menu.",reset:"Redefinir",darkMode:"Modo escuro",lightMode:"Modo claro",active:"(ativo)",background:"Fundo",accent:"Destaque",style:"Estilo",bgNeutral:"Neutro",bgWarm:"Quente",bgCool:"Frio",bgOled:"OLED Preto",bgSlate:"Azul ardósia",bgForest:"Verde floresta",accentGreen:"Verde",accentTeal:"Azul-petróleo",accentBlue:"Azul",accentOrange:"Laranja",accentPurple:"Roxo",accentRed:"Vermelho",styleClassic:"Clássico",styleGlow:"Brilhante",styleVibrant:"Vibrante",themeToggleHint:"Alternar entre modo escuro e claro usando o ícone de sol/lua na barra lateral.",autoArchivePrints:"Arquivar impressões automaticamente",autoArchiveDescription:"Salvar automaticamente arquivos 3MF quando impressões forem concluídas",saveThumbnailsDescription:"Extrair e salvar imagens de pré-visualização dos arquivos 3MF",captureFinishPhotoDescription:"Tirar foto da câmera da impressora quando a impressão for concluída",ffmpegNotInstalled:"ffmpeg não instalado",ffmpegRequired:"A captura de câmera requer ffmpeg. Instale via <brew>brew install ffmpeg</brew> (macOS) ou <apt>apt install ffmpeg</apt> (Linux).",camera:"Câmera",cameraViewMode:"Modo de visualização da câmera",cameraOverlayDescription:"A câmera abre em uma sobreposição redimensionável na tela principal",cameraWindowDescription:"A câmera abre em uma janela separada do navegador",externalCamerasDescription:"Configure câmeras externas para substituir a câmera integrada da impressora. Suporta streams MJPEG, RTSP, snapshots HTTP e câmeras USB (V4L2). Quando habilitada, a câmera externa é usada para visualização ao vivo e fotos de conclusão.",cameraPlaceholderUsb:"Caminho do dispositivo (/dev/video0)",cameraPlaceholderUrl:"URL da câmera (rtsp://... ou http://...)",cameraTypeMjpeg:"Stream MJPEG",cameraTypeRtsp:"Stream RTSP",cameraTypeSnapshot:"Snapshot HTTP",cameraTypeUsb:"Câmera USB (V4L2)",cameraRotation:"Rotação",test:"Testar",connected:"Conectado",disconnected:"Desconectado",currency:"Moeda",defaultFilamentCost:"Custo padrão do filamento (por kg)",electricityCost:"Custo da eletricidade por kWh",energyDisplayMode:"Modo de exibição de energia",energyModePrintDescription:"O painel mostra a soma da energia usada durante as impressões",energyModeTotalDescription:"O painel mostra a energia total dos plugues inteligentes",fileManager:"Gerenciador de arquivos",createArchiveEntry:"Criar entrada de arquivo ao imprimir",createArchiveEntryDescription:"Ao imprimir pelo gerenciador de arquivos, criar opcionalmente uma entrada de arquivo",lowDiskSpaceWarning:"Aviso de pouco espaço em disco",lowDiskSpaceDescription:"Mostrar aviso quando o espaço livre em disco ficar abaixo deste limite",printerFirmware:"Firmware da impressora",checkFirmwareDescription:"Verificar atualizações de firmware da Bambu Lab",bambuddySoftware:"Software Bambuddy",autoCheckDescription:"Verificar automaticamente novas versões ao iniciar",checkNow:"Verificar agora",updateAvailableVersion:"Atualização disponível: v{{version}}",releaseNotes:"Notas da versão",updateViaDocker:"Atualizar via Docker Compose:",updateViaHomeAssistant:"As atualizações são gerenciadas pelo Supervisor do Home Assistant. Abra Configurações → Complementos → Bambuddy no Home Assistant para instalar a nova versão.",installUpdate:"Instalar atualização",latestVersionRunning:"Você está usando a versão mais recente",failedToCheckUpdates:"Falha ao verificar atualizações: {{error}}",backupRestore:"Backup e Restauração",backupRestoreDescription:"Exportar/importar configurações e configurar backup do GitHub",goToBackup:"Ir para backup",externalUrl:"URL externa",externalUrlDescription:"A URL externa onde o Bambuddy está acessível. Usada para imagens de notificação e integrações externas.",bambuddyUrl:"URL do Bambuddy",externalUrlHint:"Inclua protocolo e porta (ex: http://192.168.1.100:8000)",ftpRetry:"Tentativa FTP",ftpRetryDescription:"Tentar novamente operações FTP quando o WiFi da impressora é instável. Aplica-se a downloads 3MF, uploads de impressão, downloads de timelapse e atualizações de firmware.",autoRetryDescription:"Tentar novamente automaticamente operações FTP que falharam",retryAttempts:"Tentativas de reenvio",retryDelay:"Atraso entre tentativas",connectionTimeout:"Tempo limite de conexão",time_one:"{{count}} vez",time_other:"{{count}} vezes",second_one:"{{count}} segundo",second_other:"{{count}} segundos",nSeconds:"{{count}} segundos",increaseForWeakWifi:"Aumente para impressoras com WiFi fraco",homeAssistant:"Home Assistant",homeAssistantFullDescription:"Conecte ao Home Assistant para controlar plugues inteligentes via API REST do HA. Suporta entidades switch, light, input_boolean e script.",homeAssistantUrl:"URL do Home Assistant",longLivedAccessToken:"Token de acesso de longa duração",haTokenHint:"Crie um token no HA: Perfil → Tokens de acesso de longa duração → Criar token",connectionSuccessful:"Conexão bem-sucedida",connectionFailed:"Falha na conexão",haConnectionSuccess:"Conectado com sucesso ao Home Assistant.",haConnectionFailed:"Falha ao conectar ao Home Assistant.",mqttPublishing:"Publicação MQTT",mqttDescription:"Publique eventos do BamBuddy para um broker MQTT externo para integração com Node-RED, Home Assistant e outros sistemas de automação.",mqttEnableDescription:"Publicar eventos no broker MQTT externo",brokerHostname:"Hostname do broker",port:"Porta",usernameOptional:"Usuário (opcional)",passwordOptional:"Senha (opcional)",topicPrefix:"Prefixo do tópico",topicPrefixHint:"Os tópicos serão: {{prefix}}/printers/<serial>/status, etc.",prometheusMetrics:"Métricas Prometheus",prometheusEndpointDescription:"Expor métricas da impressora em <code>/api/v1/metrics</code> para monitoramento Prometheus/Grafana.",bearerTokenOptional:"Token Bearer (opcional)",bearerTokenHint:"Se definido, as requisições devem incluir <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"Status da conexão",metricsPrinterState:"Estado da impressora (idle/printing/etc)",metricsPrintProgress:"Progresso da impressão 0-100%",metricsBedTemp:"Temperatura da mesa",metricsNozzleTemp:"Temperatura do bico",metricsPrintsTotal:"Total de impressões por resultado",metricsMore:"...e mais (camadas, ventoinhas, fila, uso de filamento)",smartPlugsDescription:"Conecte plugues inteligentes (Tasmota ou Home Assistant) para automatizar o controle de energia e rastrear o consumo energético das suas impressoras.",allOn:"Ligar todos",allOff:"Desligar todos",addSmartPlug:"Adicionar plugue inteligente",energySummary:"Resumo de energia",currentPower:"Potência atual",plugsOnline:"{{reachable}}/{{total}} plugues online",today:"Hoje",yesterday:"Ontem",total:"Total",enablePlugsForSummary:"Habilite os plugues para ver o resumo de energia",addNotificationProvider:"Adicionar",systemBadge:"(Sistema)",creating:"Criando...",changing:"Alterando...",deleteUserAndItems:"Excluir usuário E seus itens",deleteUserKeepItems:"Excluir usuário, manter itens (ficarão sem dono)",ok:"OK",twoFa:{totpTitle:"App Autenticador (TOTP)",totpDesc:"Use um app como Google Authenticator, Aegis ou Authy.",emailOtpTitle:"OTP por e-mail",emailOtpDesc:"Envie um código único para {{email}} ao fazer login.",emailOtpNoEmail:"Adicione um endereço de e-mail à sua conta para ativar este método.",addEmailFirst:"Sua conta não tem endereço de e-mail. Peça a um administrador para adicionar um.",setupTotp:"Configurar App Autenticador",setupAuthApp:"Configurar App Autenticador",setupInstructions:"Escaneie o código QR com seu app autenticador e confirme com um código.",manualEntry:"Não consegue escanear? Digite este segredo manualmente:",scannedContinue:"Código escaneado — continuar",enterCodeToConfirm:"Digite o código de 6 dígitos do seu app autenticador para confirmar.",activate:"Ativar",disableTotp:"Desativar Autenticador",disableConfirmHint:"Digite um código TOTP válido ou um código de backup para desativar o autenticador.",totpDisabled:"App autenticador desativado.",emailOtpEnabled:"OTP por e-mail ativado.",emailOtpDisabled:"OTP por e-mail desativado.",smtpRequired:"Por favor, configure e teste as configurações SMTP primeiro.",invalidCode:"Código inválido. Por favor, tente novamente.",enableEmailOtp:"Ativar OTP por e-mail",disableEmailOtp:"Desativar OTP por e-mail",emailSetupEnterCode:"Um código de verificação foi enviado para o seu endereço de e-mail. Digite-o abaixo para confirmar que você possui esta caixa de entrada.",verifyAndEnable:"Verificar e Ativar",emailDisablePasswordHint:"Digite a senha da sua conta para confirmar a desativação do OTP por e-mail.",passwordPlaceholder:"Digite sua senha",backupCodesTitle:"Salve seus códigos de backup",backupCodesWarning:"Guarde estes códigos em lugar seguro. Cada código só pode ser usado uma vez.",backupCodesRemaining:"{{count}} códigos de backup restantes",savedCodes:"Códigos salvos",regenBackup:"Regenerar códigos de backup",regenBackupHint:"Digite seu código TOTP atual para gerar 10 novos códigos de backup.",newBackupCodes:"Novos códigos de backup",linkedAccounts:"Contas SSO vinculadas",linkedAccountsDesc:"Estes provedores de identidade externos estão vinculados à sua conta.",oidcUnlinked:"Conta desvinculada."},oidc:{title:"Provedores SSO / OIDC",desc:"Configure provedores OpenID Connect para login único.",addProvider:"Adicionar provedor",newProvider:"Novo provedor",empty:"Nenhum provedor OIDC configurado ainda.",created:"Provedor criado.",updated:"Provedor atualizado.",deleted:"Provedor excluído.",deleteTitle:"Excluir provedor",deleteMessage:'Excluir "{{name}}"? Todas as contas vinculadas serão desconectadas.',form:{name:"Nome de exibição",issuerUrl:"URL do emissor",clientId:"Client ID",clientSecret:"Client secret",scopes:"Escopos",iconUrl:"URL do ícone (opcional)",enabled:"Ativado",autoCreate:"Criar usuários automaticamente",autoCreateDesc:"Cria automaticamente uma conta local no primeiro login.",autoLink:"Vincular contas existentes automaticamente",autoLinkDesc:"Vincula contas locais existentes por e-mail no primeiro login.",secretHint:"deixe em branco para manter",secretPlaceholder:"novo segredo",emailClaim:"Claim de e-mail",emailClaimDesc:"Claim JWT usado como identidade de e-mail. Use 'preferred_username' ou 'upn' para Azure Entra ID (que não envia email_verified). Use apenas nomes de claim confiáveis.",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"Exigir e-mail verificado",requireEmailVerifiedDesc:"Aceitar o claim de e-mail apenas quando o provedor o marcar como verificado.",requireEmailVerifiedWarning:"Aviso: o e-mail será aceito sem verificação. Use apenas com provedores confiáveis.",requireEmailVerifiedAutoLink:"Desabilite o vínculo automático primeiro para alterar esta configuração."}},spoolbuddy:{infoTitle:"Dispositivos SpoolBuddy",infoBody:"Os kiosks SpoolBuddy se registram automaticamente via heartbeat. Cancele o registro de um dispositivo aqui se não estiver mais em uso ou se um duplicado obsoleto foi deixado por uma falha do daemon.",duplicatesTitle:"{{count}} dispositivos registrados",duplicatesBody:"Apenas o primeiro dispositivo registrado é usado pela interface do kiosk. Se algum destes for um duplicado obsoleto após uma falha, cancele seu registro — um dispositivo online se registrará novamente no próximo heartbeat.",empty:"Nenhum dispositivo SpoolBuddy registrado ainda.",online:"Online",offline:"Offline",unregister:"Cancelar registro",unregisterSuccess:"Dispositivo removido",unregisterError:"Falha ao cancelar registro",confirmTitle:"Cancelar registro do dispositivo SpoolBuddy?",confirmBody:'Isso removerá "{{hostname}}" ({{deviceId}}) do banco de dados. Se o dispositivo estiver online, ele se registrará novamente no próximo heartbeat.',ipAddress:"Endereço IP",firmware:"Firmware",lastSeen:"Visto pela última vez",daemonUptime:"Tempo ativo do daemon",systemUptime:"Tempo ativo do sistema",never:"nunca",nfc:"NFC",scale:"Balança",cpuTemp:"Temp. CPU",memory:"Memória",disk:"Disco",update:"Atualizar",updateConfirmTitle:"Atualizar daemon do Spoolbuddy?",updateConfirmBody:'Iniciar uma atualização de software em "{{hostname}}"? O daemon será reiniciado após a aplicação.',restartBrowser:"Reiniciar navegador",restartBrowserConfirmTitle:"Reiniciar o navegador do kiosk?",restartBrowserConfirmBody:'Reiniciar o navegador do kiosk em "{{hostname}}"? A tela ficará em branco brevemente.',restartDaemon:"Reiniciar daemon",restartDaemonConfirmTitle:"Reiniciar daemon do Spoolbuddy?",restartDaemonConfirmBody:'Reiniciar o daemon do Spoolbuddy em "{{hostname}}"? O dispositivo ficará offline por alguns segundos.',reboot:"Reiniciar",rebootConfirmTitle:"Reiniciar o dispositivo?",rebootConfirmBody:'Reiniciar "{{hostname}}"? O dispositivo ficará offline por cerca de um minuto.',shutdown:"Desligar",shutdownConfirmTitle:"Desligar o dispositivo?",shutdownConfirmBody:'Desligar "{{hostname}}"? Será necessário acesso físico para ligá-lo novamente.',commandConfirm:"Confirmar",commandQueued:"Comando enfileirado",commandError:"Falha ao enviar comando"}},notification:{printStarted:{title:"Impressão Iniciada",body:"{{printer}}: {{filename}} iniciou a impressão"},printCompleted:{title:"Impressão Concluída",body:"{{printer}}: {{filename}} foi concluída com sucesso"},printFailed:{title:"Falha na Impressão",body:"{{printer}}: {{filename}} falhou"},printStopped:{title:"Impressão Interrompida",body:"{{printer}}: {{filename}} foi interrompida"},printProgress:{title:"Progresso da Impressão",body:"{{printer}}: {{filename}} está {{percent}}% concluída"},printerOffline:{title:"Impressora Offline",body:"{{printer}} está offline"},printerError:{title:"Erro na Impressora",body:"{{printer}}: {{error}}"},filamentLow:{title:"Filamento Baixo",body:"{{printer}}: O filamento está acabando"},maintenanceDue:{title:"Manutenção Pendente",body:"{{printer}}: {{items}} precisam de atenção"}},errors:{generic:"Algo deu errado",networkError:"Erro de rede. Por favor, verifique sua conexão.",notFound:"Não encontrado",unauthorized:"Não autorizado",serverError:"Erro no servidor",validationError:"Por favor, verifique sua entrada",printerConnectionFailed:"Falha ao conectar à impressora",saveFailed:"Falha ao salvar alterações",deleteFailed:"Falha ao excluir",loadFailed:"Falha ao carregar dados"},hmsErrors:{title:"Erros - {{name}}",noErrors:"Nenhum erro",viewOnWiki:"Ver no Bambu Lab Wiki",clearInstructions:"Limpe os erros na impressora para descartá-los aqui.",clearErrors:"Limpar Erros",clearSuccess:"Erros HMS limpos",clearFailed:"Falha ao limpar erros HMS"},mqttDebug:{title:"MQTT Log de Depuração",searchPlaceholder:"Pesquisar tópico ou payload...",noMessages:"Nenhuma mensagem registrada ainda",startLoggingHint:'Clique em "Iniciar Registro" para começar a capturar mensagens MQTT',noMessagesMatch:"Nenhuma mensagem corresponde ao seu filtro",adjustFilterHint:"Tente ajustar seus critérios de pesquisa ou filtro",incoming:"Entrada",outgoing:"Saída",loggingStopped:"Registro interrompido",loggingActive:"Registro ativo - as mensagens serão atualizadas automaticamente",startLogging:"Iniciar Registro",stopLogging:"Parar Registro",clearLog:"Limpar Registro",topic:"ópico",timestamp:"Carimbo de Data/Hora",direction:"Direção",all:"Todos"},printerFiles:{title:"Gerenciador de Arquivos",storageUsed:"Usado:",storageFree:"Livre:",filterPlaceholder:"Filtrar arquivos...",deleteButton:"Excluir",deleteFiles:"Excluir {{count}} arquivos",deleteFileConfirm:'Excluir "{{name}}"? Isso não pode ser desfeito.',deleteFilesConfirm:"Excluir {{count}} arquivos selecionados? Isso não pode ser desfeito.",noFiles:"Nenhum arquivo na impressora",loadingFiles:"Carregando arquivos...",failedToLoad:"Falha ao carregar arquivos",toast:{filesDeleted:"Arquivos excluídos: {{count}}",deleteFailed:"Falha ao excluir: {{error}}"}},confirm:{delete:"Tem certeza de que deseja excluir isso?",unsavedChanges:"Você tem alterações não salvas. Tem certeza de que deseja sair?",clearQueue:"Tem certeza de que deseja limpar a fila?"},login:{title:"Bambuddy Login",subtitle:"Faça login na sua conta",username:"Nome de usuário",usernamePlaceholder:"Digite seu nome de usuário",usernameOrEmail:"Nome de usuário ou Email",usernameOrEmailPlaceholder:"Nome de usuário ou Email",password:"Senha",passwordPlaceholder:"Digite sua senha",signIn:"Entrar",signingIn:"Entrando...",rememberMe:"Lembrar de mim",forgotPassword:"Esqueceu sua senha?",loginSuccess:"Login realizado com sucesso",loginFailed:"Falha no login",enterCredentials:"Por favor, insira nome de usuário e senha",enterEmail:"Por favor, insira seu endereço de e-mail",oidcLoginFailed:"Falha no login OIDC",oidcErrors:{providerError:"O provedor de identidade retornou um erro",missingParameters:"Parâmetros obrigatórios ausentes no callback OIDC",invalidState:"Estado OIDC inválido ou já utilizado",stateExpired:"Sessão OIDC expirada — tente novamente",providerNotFound:"Provedor OIDC não encontrado",discoveryFailed:"Falha ao obter o documento de descoberta OIDC",invalidDiscovery:"Documento de descoberta OIDC inválido",networkError:"Erro de rede durante a troca de token OIDC",badResponse:"Resposta inesperada durante a troca de token OIDC",noIdToken:"O provedor OIDC não retornou um token de ID",validationFailed:"Falha na validação do token OIDC",nonceMismatch:"Nonce OIDC não corresponde — possível ataque de replay",missingSubClaim:"Token OIDC sem claim sub",noLinkedAccount:"Nenhuma conta local vinculada a esta identidade OIDC",accountInactive:"Sua conta está inativa",userResolutionFailed:"Falha ao resolver sua conta",internalError:"Erro interno durante o login OIDC",tokenExchangeFailed:"Falha na troca de token OIDC"},forgotPasswordTitle:"Esqueceu a Senha",forgotPasswordMessage:"Se você esqueceu sua senha, entre em contato com o administrador do sistema para redefini-la.",forgotPasswordEmailMessage:"Digite seu endereço de email e enviaremos uma nova senha.",emailAddress:"Endereço de Email",emailPlaceholder:"seu.email@exemplo.com",cancel:"Cancelar",sending:"Enviando...",sendResetEmail:"Enviar Email de Redefinição",howToReset:"Como redefinir sua senha:",resetStep1:"Entre em contato com o administrador do Bambuddy",resetStep2:"Peça para redefinir sua senha na Gestão de Usuários",resetStep3:"Eles podem definir uma nova senha temporária para você",resetStep4:"Faça login com a nova senha e altere-a nas Configurações",gotIt:"Entendi",resetPassword:{title:"Definir nova senha",subtitle:"Digite e confirme sua nova senha abaixo.",newPassword:"Nova senha",newPasswordPlaceholder:"Pelo menos 8 caracteres",confirmPassword:"Confirmar senha",confirmPasswordPlaceholder:"Repetir nova senha",saving:"Salvando…",submit:"Definir nova senha",backToLogin:"Voltar para o login",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 8 caracteres",resetFailed:"Falha ao redefinir senha. O link pode ter expirado."},twoFA:{title:"Autenticação em dois fatores",subtitle:"Sua conta está protegida com 2FA. Insira o código de verificação abaixo.",methodAuthenticator:"Aplicativo autenticador",methodEmail:"Código por e-mail",methodBackup:"Código de recuperação",instructionsTotp:"Abra seu aplicativo autenticador e insira o código de 6 dígitos gerado para o Bambuddy.",instructionsEmail:"Um código de 6 dígitos foi enviado para o seu e-mail. Ele é válido por 10 minutos.",instructionsEmailNotSent:"Clique no botão abaixo para receber um código de verificação por e-mail.",instructionsBackup:"Insira um dos seus códigos de recuperação de 8 caracteres. Cada código só pode ser utilizado uma vez.",sendCodeButton:"Enviar código por e-mail",sendingCode:"Enviando...",resendCode:"Reenviar código",codeLabel:"Código de verificação",backupCodeLabel:"Código de recuperação",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"Verificar",verifyingButton:"Verificando...",backToLogin:"← Voltar para o login",orContinueWith:"ou entrar com",signInWith:"Entrar com {{provider}}",enterCode:"Por favor, insira o código de verificação",sendCodeFailed:"Falha ao enviar o código de verificação",invalidCode:"Código inválido. Por favor, tente novamente."}},setup:{title:"Bambuddy Configuração",subtitle:"Configure a autenticação para sua instância do Bambuddy",enableAuth:"Ativar Autenticação",adminAccount:"Conta de Administrador",adminAccountDesc:"Se usuários administradores já existirem, a autenticação será ativada usando as contas de administrador existentes. Deixe os campos abaixo vazios para usar os administradores existentes ou insira novas credenciais para criar um novo usuário administrador.",adminUsername:"Nome de usuário do administrador",adminPassword:"Senha do administrador",optionalIfAdminExists:"(opcional se usuários administradores existirem)",adminUsernamePlaceholder:"Digite o nome de usuário do administrador (opcional)",adminPasswordPlaceholder:"Digite a senha do administrador (opcional)",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a senha do administrador",settingUp:"Configurando...",completeSetup:"Concluir Configuração",toast:{authEnabledAdminCreated:"Autenticação ativada e usuário administrador criado",authEnabledExistingAdmins:"Autenticação ativada usando usuários administradores existentes",setupCompleted:"Configuração concluída",enterBothCredentials:"Por favor, insira o nome de usuário e a senha do administrador, ou deixe ambos vazios para usar os usuários administradores existentes",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres"}},changePassword:{title:"Alterar Senha",currentPassword:"Senha Atual",currentPasswordPlaceholder:"Digite a senha atual",newPassword:"Nova Senha",newPasswordPlaceholder:"Digite a nova senha (mínimo 6 caracteres)",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a nova senha",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres",changing:"Alterando...",success:"Senha alterada com sucesso",failed:"Falha ao alterar a senha"},plateAlert:{title:"Impressão Pausada!",message:"Objetos detectados na mesa de impressão. A impressão foi automaticamente pausada. Por favor, limpe a mesa e retome a impressão.",understand:"Entendi"},camera:{title:"Visualização da Câmera",invalidPrinterId:"ID da impressora inválido",live:"Ao Vivo",snapshot:"Captura",restartStream:"Reiniciar transmissão",refreshSnapshot:"Atualizar captura",fullscreen:"Tela Cheia",exitFullscreen:"Sair da Tela Cheia",connectingToCamera:"Conectando à câmera...",capturingSnapshot:"Capturando imagem...",connectionLost:"Conexão perdida",connectionFailed:"Falha na conexão com a câmera",reconnecting:"Reconectando em {{countdown}}s... (tentativa {{attempt}}/{{max}})",reconnectNow:"Reconectar agora",cameraUnavailable:"Câmera indisponível",cameraUnavailableDesc:"Certifique-se de que a impressora está ligada e conectada.",noCamera:"Nenhuma câmera disponível",retry:"Tentar novamente",cameraStream:"Transmissão da câmera",zoomOut:"Reduzir zoom",zoomIn:"Aumentar zoom",resetZoom:"Redefinir zoom",recording:"Gravando",startRecording:"Iniciar gravação",stopRecording:"Parar gravação",chamberLight:"Alternar luz da câmara"},groups:{title:"Gerenciamento de Grupos",subtitle:"Gerenciar grupos de permissão para controle de acesso",backToSettings:"Voltar para Configurações",createGroup:"Criar Grupo",noPermission:"Você não tem permissão para acessar esta página.",system:"Sistema",noDescription:"Sem descrição",usersCount:"{{count}} usuários",permissionsCount:"{{count}} permissões",edit:"Editar",delete:"Excluir",toast:{created:"Grupo criado com sucesso",updated:"Grupo atualizado com sucesso",deleted:"Grupo excluído com sucesso",enterGroupName:"Por favor, insira um nome para o grupo"},modal:{editGroup:"Editar Grupo",createGroup:"Criar Grupo",cancel:"Cancelar",saving:"Salvando...",creating:"Criando...",saveChanges:"Salvar Alterações"},form:{groupName:"Nome do Grupo",groupNamePlaceholder:"Insira o nome do grupo",systemGroupWarning:"Os nomes dos grupos do sistema não podem ser alterados",description:"Descrição",descriptionPlaceholder:"Insira a descrição (opcional)",permissions:"Permissões ({{count}} selecionadas)"},deleteModal:{title:"Excluir Grupo",message:"Tem certeza de que deseja excluir este grupo? Os usuários deste grupo perderão essas permissões.",confirm:"Excluir Grupo"},editor:{title:"Editar Grupo",createTitle:"Criar Grupo",search:"Pesquisar permissões...",selectAll:"Selecionar Tudo",clearAll:"Limpar Tudo",permissionsSelected:"{{count}} selecionada(s)",noResults:"Nenhuma permissão corresponde à sua pesquisa"}},users:{title:"Gerenciamento de Usuários",subtitle:"Gerenciar usuários e seu acesso à sua instância do Bambuddy",backToSettings:"Voltar para Configurações",createUser:"Criar Usuário",noPermission:"Você não tem permissão para acessar esta página.",admin:"Admin",noGroups:"Sem grupos",active:"Ativo",inactive:"Inativo",edit:"Editar",delete:"Excluir",system:"Sistema",noGroupsAvailable:"Nenhum grupo disponível",table:{username:"Nome de Usuário",groups:"Grupos",status:"Status",actions:"Ações"},toast:{created:"Usuário criado com sucesso",updated:"Usuário atualizado com sucesso",deleted:"Usuário excluído com sucesso",fillRequired:"Por favor, preencha todos os campos obrigatórios",passwordsDoNotMatch:"As senhas não coincidem",passwordTooShort:"A senha deve ter pelo menos 6 caracteres"},modal:{createUser:"Criar Usuário",editUser:"Editar Usuário",cancel:"Cancelar",creating:"Criando...",saving:"Salvando...",saveChanges:"Salvar Alterações",advancedAuthSubtitle:"com Autenticação Avançada"},form:{username:"Nome de Usuário",usernamePlaceholder:"Insira o nome de usuário",email:"Email",emailPlaceholder:"user@example.com",password:"Senha",passwordPlaceholder:"Insira a senha",confirmPassword:"Confirmar Senha",confirmPasswordPlaceholder:"Confirme a senha",newPasswordPlaceholder:"Insira a nova senha",confirmNewPasswordPlaceholder:"Confirme a nova senha",leaveBlankToKeep:"deixe em branco para manter a atual",groups:"Grupos",optional:"opcional",autoGeneratedPassword:"Uma senha segura será gerada automaticamente e enviada por e-mail ao usuário.",passwordManagedByAdvancedAuth:'A senha é gerenciada pela Autenticação Avançada. Use "Redefinir Senha" para enviar uma nova senha ao usuário por e-mail.',resetPassword:"Redefinir Senha",resettingPassword:"Redefinindo Senha..."},deleteModal:{title:"Excluir Usuário",message:"Tem certeza de que deseja excluir este usuário? Esta ação não pode ser desfeita.",confirm:"Excluir Usuário"}},streamOverlay:{title:"Stream Overlay",invalidPrinterId:"ID da impressora inválido",cameraStream:"Transmissão da câmera",progress:"Progresso da impressão",eta:"ETA",printerIdle:"Impressora ociosa",printerOffline:"Impressora offline",status:{printing:"Imprimindo",paused:"Pausado",finished:"Concluído",failed:"Falhou",idle:"Ocioso",unknown:"Desconhecido"}},profiles:{title:"Perfis",subtitle:"Gerencie seus presets de fatiador e calibrações de avanço de pressão",tabs:{cloud:"Perfis na Nuvem",local:"Perfis Locais",kprofiles:"K-Perfis"},localProfiles:{title:"Perfis Locais",subtitle:"Importe e gerencie presets de fatiador do OrcaSlicer",import:"Importar Perfis",importDesc:"Solte arquivos .bbscfg, .bbsflmt, .orca_filament, .zip ou .json aqui",importing:"Importando...",search:"Pesquisar presets locais...",noPresets:"Nenhum preset local ainda",badge:"Local",edit:"Editar",delete:"Excluir",cancel:"Cancelar",deleteConfirmTitle:"Excluir Preset",deleteConfirm:"Tem certeza de que deseja excluir este preset? Esta ação não pode ser desfeita.",source:"Fonte",inheritsFrom:"Herdado de",filamentType:"Tipo",vendor:"Fornecedor",compatiblePrinters:"Impressoras Compatíveis",nozzleTemp:"Temperatura do Bico",cost:"Custo",density:"Densidade",pressureAdvance:"Avanço de Pressão",filament:"Filamento",process:"Processo",printer:"Impressora",toast:{importSuccess:"{{count}} preset(s) importada(s)",importSkipped:"{{count}} preset(s) ignorada(s) (duplicadas)",importError:"{{count}} erro(s) durante a importação",deleted:"Preset excluído",updated:"Preset atualizado"}},connectedAs:"Conectado como",logout:"Sair",noLogoutPermission:"Você não tem permissão para sair",failedToLoad:"Falha ao carregar perfis",retry:"Tentar novamente",time:{justNow:"Agora mesmo",minsAgo:"há {{count}} minutos",hoursAgo:"há {{count}} horas",daysAgo:"há {{count}} dias"},toast:{loggedOut:"Desconectado"},login:{title:"Conectar ao Bambu Cloud",subtitle:"Sincronize seus presets de fatiador entre dispositivos",email:"Email",password:"Senha",region:"Região",regionGlobal:"Global",regionChina:"China",verificationCode:"Código de Verificação",totpCode:"Código do Autenticador",checkEmail:"Verifique seu email ({{email}}) para um código de 6 dígitos",enterTotpHint:"Digite o código de 6 dígitos do seu aplicativo autenticador",accessToken:"Token de Acesso",accessTokenHint:"Cole seu token de acesso Bambu Lab (do Bambu Studio)",back:"Voltar",loginButton:"Entrar",verifyButton:"Verificar",setTokenButton:"Definir Token",useToken:"Usar token de acesso em vez disso",useEmail:"Entrar com email em vez disso",toast:{loggedIn:"Conectado com sucesso",codeSent:"Código de verificação enviado para seu email",enterTotp:"Digite o código do seu aplicativo autenticador",tokenSet:"Token definido com sucesso"}},presets:{myPreset:"Meu preset (editável)",duplicate:"Duplicar",editable:"Editável",failedToLoadDetails:"Falha ao carregar detalhes do preset",deleteConfirm:"Excluir este preset?",deleteWarning:'Isso excluirá permanentemente "{{name}}" do Bambu Cloud. Esta ação não pode ser desfeita.',noDuplicatePermission:"Você não tem permissão para duplicar presets",noEditPermission:"Você não tem permissão para editar presets",noDeletePermission:"Você não tem permissão para excluir presets",types:{filament:"Preset de filamento",printer:"Preset de impressora",process:"Preset de processo"},toast:{deleted:"Preset excluído",created:"Preset criado",updated:"Preset atualizado",duplicated:"Preset duplicado",fieldAdded:'Campo "{{key}}" adicionado',exported:"Preset exportado"},baseLabel:"Base: {{name}}",currentLabel:"Atual: {{name}}",newPreset:"Novo Preset",editPreset:"Editar Preset",duplicatePreset:"Duplicar Preset",createNewPreset:"Criar Novo Preset",customizeSettings:"Personalizar configurações para seu novo preset",compareWithBase:"Comparar com o preset base",compare:"Comparar",basePreset:"Preset Base",selectBasePreset:"Selecionar preset base...",presetName:"Nome do Preset",myCustomPreset:"Meu preset personalizado",inheritsFrom:"Herdado de",dropJsonToImport:"Solte o arquivo JSON para importar",tabs:{common:"Comum",allFields:"Todos os Campos"},availableFields:"Campos Disponíveis",searchFieldsPlaceholder:"Pesquisar campos...",noMatchingFields:"Nenhum campo correspondente",allFieldsAdded:"Todos os campos adicionados",addCustomField:"Adicionar campo personalizado",yourOverrides:"Suas Substituições",noOverridesYet:"Nenhuma substituição ainda",clickFieldsToAdd:"Clique nos campos à esquerda para adicioná-los",saveAsTemplate:"Salvar como modelo",jsonTip:"Dica: Arraste e solte um arquivo .json em qualquer lugar deste modal para importar configurações"},cloudView:{searchPlaceholder:"Pesquisar presets...",templates:"Modelos",refresh:"Atualizar",newPreset:"Novo Preset",clearFilters:"Limpar filtros",compareMode:"Modo de Comparação",selectAnotherPreset:"Selecionar outro preset {{type}}",clickTwoPresets:"Clique em dois presets do mesmo tipo para comparar",selectFirst:"1. Selecionar primeiro",selectSecond:"2. Selecionar segundo",compareNow:"Comparar Agora",lastSynced:"Última sincronização:",showingCount:"Mostrando {{showing}} de {{total}} presets",noPresetsFound:"Nenhum preset encontrado",columns:{filament:"Filamento",process:"Processo",printer:"Impressora"},noFilamentPresets:"Nenhum preset de filamento",noProcessPresets:"Nenhum preset de processo",noPrinterPresets:"Nenhum preset de impressora",filters:{type:"Tipo",owner:"Proprietário",printer:"Impressora",nozzle:"Bico",filament:"Filamento",layer:"Camada",all:"Todos",myPresets:"Meus Presets",builtIn:"Integrado",process:"Processo"},noTemplatesPermission:"Você não tem permissão para gerenciar modelos",noRefreshPermission:"Você não tem permissão para atualizar perfis",noCreatePermission:"Você não tem permissão para criar presets"},templates:{title:"Modelos Rápidos",noTemplates:"Nenhum modelo ainda",createFirst:"Crie modelos a partir do editor de presets",typeFilter:"Tipo:",deleteTitle:"Excluir Modelo",deleteWarning:"Esta ação não pode ser desfeita",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',namePlaceholder:"Nome do modelo",descriptionPlaceholder:"Descrição",settingsJson:"Configurações (JSON)",fieldsCount:"{{count}} campos",shownInModals:"Exibido em modais",hiddenInModals:"Oculto em modais",apply:"Aplicar",toast:{deleted:"Modelo excluído",updated:"Modelo atualizado",created:"Modelo criado",applied:"Modelo aplicado"}}},support:{debugLoggingActive:"Registro de depuração ativo",manageLogs:"Gerenciar",collectItem7:"Conectividade da impressora e versões de firmware",collectItem8:"Status de integração (Spoolman, MQTT, HA)",collectItem9:"Interfaces de rede (somente sub-redes)",collectItem10:"Versões de pacotes Python",collectItem11:"Verificações de integridade do banco de dados",collectItem12:"Detalhes do ambiente Docker"},fileManager:{title:"Gerenciador de Arquivos",subtitle:"Organize e gerencie seus arquivos de impressão",uploadFiles:"Enviar Arquivos",newFolder:"Nova Pasta",folderName:"Nome da Pasta",folderNamePlaceholder:"ex.: Peças Funcionais",renameFile:"Renomear Arquivo",renameFolder:"Renomear Pasta",moveFiles:"Mover {{count}} Arquivo(s)",rootNoFolder:"Raiz (Sem Pasta)",current:"Atual",linkFolder:"Vincular Pasta",linkFolderDescription:'Vincular "{{name}}" a um projeto ou arquivo para acesso rápido.',project:"Projeto",archive:"Arquivo",noProjectsFound:"Nenhum projeto encontrado",noArchivesFound:"Nenhum arquivo encontrado",unlink:"Desvincular",link:"Vincular",dragDropFiles:"Arraste e solte os arquivos aqui",dropFilesHere:"Solte os arquivos aqui",orClickToBrowse:"ou clique para procurar",allFileTypesSupported:"Todos os tipos de arquivos são suportados. Arquivos ZIP serão extraídos.",zipFilesDetected:"Arquivos ZIP detectados",zipExtractOptions:"Arquivos ZIP serão extraídos. Escolha como lidar com a estrutura de pastas:",preserveZipStructure:"Preservar estrutura de pastas do ZIP",createFolderFromZip:"Criar pasta a partir do nome do arquivo ZIP",stlThumbnailGeneration:"Geração de miniaturas STL",zipMayContainStl:"Arquivos ZIP podem conter arquivos STL. Miniaturas podem ser geradas durante a extração.",thumbnailsCanBeGenerated:"Miniaturas podem ser geradas para arquivos STL. Modelos grandes podem levar mais tempo para processar.",generateThumbnailsForStl:"Gerar miniaturas para arquivos STL",threemfDetected:"Arquivos 3MF detectados",threemfExtractionInfo:"Modelo da impressora, material, cor e configurações de impressão serão extraídos automaticamente dos arquivos 3MF.",willBeExtracted:"Será extraído",filesExtracted:"{{count}} arquivos extraídos",uploadComplete:"Upload concluído: {{succeeded}} bem-sucedidos",uploadFailed:"Falha no envio",zipFilesFailed:"{{count}} arquivos falharam",uploading:"Enviando...",changeLink:"Alterar link...",linkTo:"Vincular a...",linkToProjectOrArchive:"Vincular a projeto ou arquivo",addToQueue:"Adicionar à fila",schedulePrint:"Agendar impressão",generateThumbnail:"Gerar miniatura",generateThumbnails:"Gerar miniaturas",generateThumbnailsForMissing:"Gerar miniaturas para arquivos STL que não possuem",gridView:"Visualização em grade",listView:"Visualização em lista",lowDiskSpaceWarning:"Aviso de pouco espaço em disco",lowDiskSpaceDetails:"Apenas {{free}} livres de {{total}} no total. O limite está definido para {{threshold}} GB nas configurações.",files:"Arquivos",folders:"Pastas",size:"Tamanho",free:"Livre",allFiles:"Todos os arquivos",wrap:"Quebrar texto",enableTextWrapping:"Ativar quebra de texto",disableTextWrapping:"Desativar quebra de texto",collapse:"Recolher",collapseFoldersByDefault:"Recolher pastas por padrão",expandFoldersByDefault:"Expandir pastas por padrão",dragToResizeTooltip:"Arraste para redimensionar, clique duas vezes para redefinir",searchFiles:"Pesquisar arquivos...",allTypes:"Todos os tipos",prints:"Impressões",ascending:"Crescente",descending:"Decrescente",resultsCount:"{{showing}} de {{total}} arquivos",selectAll:"Selecionar tudo",deselectAll:"Desmarcar tudo",selected:"{{count}} selecionado(s)",adding:"Adicionando...",loadingFiles:"Carregando arquivos...",folderIsEmpty:"A pasta está vazia",noFilesYet:"Nenhum arquivo ainda",folderEmptyDescription:"Envie arquivos ou mova arquivos para esta pasta para começar.",noFilesDescription:"Envie arquivos para começar a organizar seus arquivos relacionados à impressão.",noMatchingFiles:"Nenhum arquivo correspondente",noMatchingFilesDescription:"Nenhum arquivo corresponde aos seus critérios de pesquisa ou filtro.",clearFilters:"Limpar filtros",printedCount:"Impresso {{count}}x",uploadedBy:"Enviado por",deleteFolder:"Excluir pasta",deleteFile:"Excluir arquivo",deleteFilesCount:"Excluir {{count}} arquivos",deleteFolderConfirm:"Tem certeza de que deseja excluir esta pasta? Todos os arquivos dentro também serão excluídos.",deleteFileConfirm:"Tem certeza de que deseja excluir este arquivo?",deleteFilesConfirm:"Tem certeza de que deseja excluir {{count}} arquivos selecionados? Esta ação não pode ser desfeita.",deleting:"Excluindo...",noPermissionRenameFolder:"Você não tem permissão para renomear pastas",noPermissionLinkFolder:"Você não tem permissão para vincular pastas",noPermissionDeleteFolder:"Você não tem permissão para excluir pastas",noPermissionPrint:"Você não tem permissão para imprimir",noPermissionSlice:"You do not have permission to slice files",noPermissionAddToQueue:"Você não tem permissão para adicionar à fila",noPermissionDownload:"Você não tem permissão para baixar arquivos",noPermissionRenameFile:"Você não tem permissão para renomear este arquivo",noPermissionGenerateThumbnail:"Você não tem permissão para gerar miniaturas",noPermissionDeleteFile:"Você não tem permissão para excluir este arquivo",noPermissionCreateFolder:"Você não tem permissão para criar pastas",noPermissionUpload:"Você não tem permissão para enviar arquivos",noPermissionMoveFiles:"Você não tem permissão para mover arquivos",noPermissionDeleteFiles:"Você não tem permissão para excluir arquivos",linkExternal:"Vincular externo",linkExternalFolder:"Vincular pasta externa",linkExternalFolderDescription:"Montar um diretório do host (NAS, USB, compartilhamento de rede) no Gerenciador de Arquivos. Os arquivos não são copiados — são acessados diretamente do caminho original.",externalFolderNamePlaceholder:"ex. Impressões NAS",externalPath:"Caminho do host",externalPathHelp:"Caminho absoluto do diretório no host Docker. Deve estar montado como bind no contêiner.",readOnly:"Somente leitura",readOnlyHelp:"impede uploads e exclusões",showHiddenFiles:"Mostrar arquivos ocultos (arquivos ponto)",externalFolder:"Pasta externa",scanFolder:"Escanear",toast:{folderCreated:"Pasta criada",folderDeleted:"Pasta excluída",fileDeleted:"Arquivo excluído",filesDeleted:"Excluídos {{count}} arquivos",filesMoved:"Arquivos movidos",folderLinked:"Pasta vinculada",folderUnlinked:"Pasta desvinculada",externalFolderLinked:"Pasta externa vinculada e escaneada",folderScanned:"Escaneamento concluído: {{added}} adicionados, {{removed}} removidos",addedToQueue:"Adicionado {{count}} arquivo(s) à fila",addedToQueuePartial:"Adicionado {{added}} arquivo(s), {{failed}} falharam",failedToAddToQueue:"Falha ao adicionar arquivos: {{error}}",fileRenamed:"Arquivo renomeado",folderRenamed:"Pasta renomeada",thumbnailsGenerated:"Geradas {{count}} miniatura(s)",thumbnailsGeneratedPartial:"Geradas {{succeeded}} miniatura(s), {{failed}} falharam",noStlMissingThumbnails:"Nenhum arquivo STL sem miniatura",failedToGenerateThumbnails:"Falha ao gerar miniaturas: {{error}}",thumbnailGenerated:"Miniatura gerada",failedToGenerateThumbnail:"Falha ao gerar miniatura: {{error}}"}},projects:{title:"Projetos",subtitle:"Organize e acompanhe seus projetos de impressão 3D",newProject:"Novo Projeto",editProject:"Editar Projeto",deleteProject:"Excluir Projeto",projectName:"Nome do Projeto",description:"Descrição",noProjects:"Nenhum projeto ainda",noProjectsFiltered:"Nenhum projeto {{status}}",noProjectsFilteredHelp:"Você não tem nenhum projeto {{status}}. Os projetos aparecerão aqui quando seu status mudar.",createFirst:"Crie seu primeiro projeto para começar a organizar impressões relacionadas, acompanhar o progresso e gerenciar suas construções.",createFirstButton:"Crie Seu Primeiro Projeto",create:"Criar",files:"Arquivos",prints:"Impressões",plates:"Placas",parts:"Peças",lastModified:"Última Modificação",deleteConfirm:"Tem certeza de que deseja excluir este projeto? Arquivos e itens da fila serão desvinculados, mas não excluídos.",addFiles:"Adicionar Arquivos",removeFile:"Remover Arquivo",viewDetails:"Ver Detalhes",namePlaceholder:"ex., Voron 2.4 Build",descriptionPlaceholder:"Descrição opcional...",urlLabel:"URL",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"A URL deve começar com http:// ou https://",openExternalUrl:"Abrir URL do projeto",coverImageLabel:"Imagem de capa",coverImageAlt:"Imagem de capa do projeto",coverImageUpload:"Enviar",coverImageReplace:"Substituir",coverImageRemove:"Remover",color:"Cor",targetPlates:"Placas Alvo",targetPlatesPlaceholder:"ex., 25",targetPlatesHelp:"Número de trabalhos de impressão",targetParts:"Peças Alvo",targetPartsPlaceholder:"ex., 150",targetPartsHelp:"Total de objetos necessários",tagsLabel:"Tags (separadas por vírgula)",tagsPlaceholder:"ex., voron, funcional, presente",dueDate:"Data de Vencimento",priority:"Prioridade",priorityLow:"Baixa",priorityNormal:"Normal",priorityHigh:"Alta",priorityUrgent:"Urgente",statusActive:"Ativo",statusCompleted:"Concluído",statusArchived:"Arquivado",done:"Concluído",completed:"Concluído",failed:"Falhou",inQueue:"Na fila",noPrintsYet:"Nenhuma impressão ainda",printJobs:"Trabalhos de impressão (placas)",partsPrinted:"Peças impressas",failedParts:"Peças falhadas",import:"Importar",export:"Exportar",importProject:"Importar projeto",exportAll:"Exportar todos os projetos",loading:"Carregando projetos...",noEditPermission:"Você não tem permissão para editar projetos",noDeletePermission:"Você não tem permissão para excluir projetos",noCreatePermission:"Você não tem permissão para criar projetos",noImportPermission:"Você não tem permissão para importar projetos",noExportPermission:"Você não tem permissão para exportar projetos",toast:{created:"Projeto criado",updated:"Projeto atualizado",deleted:"Projeto excluído",imported:"Projeto importado",multipleImported:"{{count}} projetos importados",importFailed:"Falha na importação",exported:"Projetos exportados (apenas metadados)"}},projectDetail:{notFound:"Projeto não encontrado",backToProjects:"Voltar para Projetos",export:"Exportar",exportProject:"Exportar projeto",noExportPermission:"Você não tem permissão para exportar projetos",noEditPermission:"Você não tem permissão para editar projetos",partOf:"Parte de:",priorityLabel:"Prioridade:",noPrints:"Nenhuma impressão neste projeto ainda",status:{active:"Ativo",completed:"Concluído",archived:"Arquivado"},priority:{low:"Baixa",normal:"Normal",high:"Alta",urgent:"Urgente"},dueDate:{overdue:"Atrasado",today:"Vence hoje",daysLeft:"{{count}} dias restantes"},progress:{platesProgress:"Progresso das Placas",partsProgress:"Progresso das Peças",printJobs:"Trabalhos de Impressão",parts:"Peças",percentComplete:"{{percent}}% concluído",remaining:"{{count}} restantes"},stats:{printJobs:"Trabalhos de Impressão",total:"total",failed:"{{count}} falhou",partsPrinted:"{{count}} peças impressas",printTime:"Tempo de Impressão",filamentUsed:"Filamento Usado"},cost:{title:"Rastreamento de Custos",filamentCost:"Custo do Filamento",energy:"Energia",totalCost:"Custo Total",total:"Total",includesBom:"incl. lista de materiais",budget:"Orçamento",remaining:"Restante"},subProjects:{title:"Sub-projetos ({{count}})"},notes:{title:"Notas",noEditPermission:"Você não tem permissão para editar notas",placeholder:"Adicione notas sobre este projeto...",empty:"Nenhuma nota ainda. Clique em Editar para adicionar notas."},files:{title:"Arquivos",linkFolders:"Vincular pastas do Gerenciador de Arquivos",forQuickAccess:"a este projeto para acesso rápido.",fileCount:"{{count}} arquivo(s)",empty:"Nenhuma pasta vinculada. Vá para o Gerenciador de Arquivos e vincule uma pasta a este projeto.",noFiles:"Nenhum arquivo nesta pasta.",print:"Imprimir agora",addToQueue:"Adicionar à fila"},bom:{title:"Lista de Materiais",acquired:"{{completed}}/{{total}} adquiridos",showAll:"Mostrar todos",hideDone:"Ocultar concluídos",addPart:"Adicionar Peça",noAddPermission:"Você não tem permissão para adicionar peças",partNamePlaceholder:"Nome da peça (ex.: parafusos M3x8)",partName:"Nome da peça",qty:"Quantidade",price:"Preço ({{currency}})",sourcingUrlPlaceholder:"URL de fornecimento (opcional)",remarksPlaceholder:"Observações (opcional)",deletePart:"Excluir Peça",deleteConfirm:'Tem certeza de que deseja excluir "{{name}}"?',noUpdatePermission:"Você não tem permissão para atualizar peças",noEditPermission:"Você não tem permissão para editar peças",noDeletePermission:"Você não tem permissão para excluir peças",totalCost:"Custo total:",empty:"Nenhuma peça na lista de materiais. Adicione hardware, eletrônicos ou outros componentes para rastrear o que precisa ser adquirido."},timeline:{title:"Linha do Tempo de Atividades",empty:"Nenhuma atividade ainda."},template:{saveAsTemplate:"Salvar como Modelo",noCreatePermission:"Você não tem permissão para criar modelos"},queue:{title:"Fila",viewAll:"Ver todos",printing:"{{count}} imprimindo",queued:"{{count}} na fila"},prints:{title:"Impressões ({{count}})"},toast:{projectUpdated:"Projeto atualizado",partAdded:"Peça adicionada",partRemoved:"Peça removida",exportFailed:"Falha na exportação",projectExported:"Projeto exportado",templateCreated:"Modelo criado"}},system:{title:"Informações do Sistema",version:"Versão",uptime:"Tempo de Atividade",cpuUsage:"Uso da CPU",memoryUsage:"Uso da Memória",diskUsage:"Uso do Disco",networkInfo:"Informações de Rede",logs:"Logs",debugMode:"Modo de Depuração",enableDebug:"Ativar Registro de Depuração",disableDebug:"Desativar Registro de Depuração",downloadLogs:"Baixar Logs",clearLogs:"Limpar Logs",dockerInfo:"Informações do Docker",containerName:"Nome do Contêiner",imageName:"Nome da Imagem",platform:"Plataforma",architecture:"Arquitetura"},library:{title:"Biblioteca de Filamentos",addFilament:"Adicionar Filamento",editFilament:"Editar Filamento",deleteFilament:"Excluir Filamento",vendor:"Fornecedor",material:"Material",color:"Cor",kFactor:"Fator K",temperature:"Temperatura",noFilaments:"Nenhum filamento na biblioteca",deleteConfirm:"Tem certeza de que deseja excluir este filamento?",importFromPrinter:"Importar da Impressora",exportToFile:"Exportar para Arquivo"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Integração com Spoolman",enabled:"Spoolman Ativado",url:"URL do Spoolman",connected:"Conectado",disconnected:"Não Conectado",testConnection:"Testar Conexão",sync:"Sincronizar",syncing:"Sincronizando...",lastSync:"Última Sincronização",linkToSpoolman:"Vincular ao Spoolman",openInSpoolman:"Abrir no Spoolman",unlinkSpool:"Desvincular Carretel",unlinkConfirmTitle:"Desvincular carretel?",unlinkConfirmMessage:"Isso desconectará o carretel do Spoolman. Os dados do carretel no Spoolman permanecerão inalterados.",selectSpool:"Selecionar Carretel",noUnlinkedSpools:"Nenhum carretel desvinculado disponível",linkSuccess:"Carretel vinculado ao Spoolman com sucesso",linkFailed:"Falha ao vincular carretel",unlinkSuccess:"Carretel desvinculado do Spoolman com sucesso",unlinkFailed:"Falha ao desvincular carretel",spoolId:"Carretel ID (Spool ID)",fillSourceLabel:"(Spoolman)",weight:"Peso",remaining:"Restante",disableWeightSync:"Desativar Sincronização de Peso Estimado do AMS",disableWeightSyncDesc:"Não atualize a capacidade restante a partir das estimativas do AMS. Use isso se preferir o rastreamento de uso do Spoolman em vez das estimativas baseadas em porcentagem do AMS. Novos carretéis ainda usarão a estimativa do AMS como seu peso inicial.",reportPartialUsage:"Relatar Uso Parcial para Impressões Falhadas",reportPartialUsageDesc:"Quando uma impressão falha ou é cancelada, relate o filamento estimado usado até aquele ponto com base no progresso das camadas."},inventory:{title:"Inventário de Carretéis",spoolmanMixedContentTitle:"Spoolman não pode carregar em HTTPS — conteúdo misto bloqueado pelo navegador",spoolmanMixedContentBody:"O Bambuddy é servido via HTTPS (pelo seu reverse proxy), mas a URL do Spoolman ainda é HTTP. Os navegadores bloqueiam conteúdo misto por segurança, então a interface embutida do Spoolman não consegue carregar. O Spoolman também precisa estar acessível via HTTPS.",spoolmanMixedContentFixReverseProxy:"Coloque o Spoolman atrás do mesmo reverse proxy do Bambuddy (Traefik / Nginx / Caddy) com HTTPS e atualize a URL do Spoolman em Configurações com o novo endereço HTTPS.",spoolmanMixedContentFixOpenNewTab:"Como alternativa, abra o Spoolman em uma nova aba via HTTP — as regras de conteúdo misto só se aplicam a frames embutidos, uma aba independente funciona normalmente.",spoolmanOpenInNewTab:"Abrir Spoolman em nova aba",addSpool:"Adicionar Carretel",editSpool:"Editar Carretel",material:"Material",selectMaterial:"Selecionar material...",subtype:"Subtipo",brand:"Marca",searchBrand:"Pesquisar marca...",useCustomBrand:'Usar "{{brand}}"',useCustomMaterial:"Usar material personalizado: {{material}}",colorName:"Nome da Cor",colorNamePlaceholder:"Jade White, Fire Red...",color:"Cor",hexColor:"Cor Hexadecimal",pickColor:"Escolher cor personalizada",labelWeight:"Peso da Etiqueta",coreWeight:"Peso do Carretel Vazio",searchSpoolWeight:"Pesquisar peso do carretel...",weightUsed:"Usado",currentWeight:"Peso Restante",measuredWeight:"Peso Medido",spoolName:"Bobina",costPerKg:"Custo por kg",measuredWeightError:"O peso medido deve estar entre {{min}}g e {{max}}g.",slicerFilament:"Filamento do Fatiador",slicerFilamentName:"Nome do Predefinido do Fatiador",slicerPreset:"Predefinido do Fatiador",searchPresets:"Pesquisar predefinições de filamento...",selectedPreset:"Selecionado",noPresetsFound:"Nenhuma predefinição encontrada",tempOverrides:"Substituições de Temperatura",note:"Nota",notePlaceholder:"Quaisquer notas adicionais sobre este spool...",category:"Categoria",categoryPlaceholder:"ex. Produção, Protótipo, Cliente A",categoryNone:"Sem categoria",lowStockThresholdOverride:"Limite de estoque baixo (este carretel)",lowStockThresholdOverrideHelp:"Deixe em branco para usar o limite global ({{global}}%).",clearRfid:"Limpar tag RFID",rfidCleared:"Tag RFID limpa",archive:"Arquivar",restore:"Restaurar",noSpools:"Nenhum carretel ainda. Adicione seu primeiro carretel para começar.",noAvailableSpools:"Nenhum carretel disponível. Adicione um carretel ao seu inventário ou desatribua um de outro slot primeiro.",kProfiles:"K-Perfis",addKProfile:"Adicionar K-Perfil",assignSpool:"Atribuir Carretel",unassignSpool:"Desatribuir",assignSuccess:"Carretel atribuído e slot AMS configurado",assignFailed:"Falha ao atribuir carretel",selectSpool:"Selecione um carretel para atribuir a este slot",assigned:"Atribuído",assigning:"Atribuindo...",searchSpools:"Pesquisar carretéis...",showAllSpools:"Mostrar todos os carretéis",allMaterials:"Todos os Materiais",filterByBrand:"Filtrar por marca...",showArchived:"Mostrar arquivados",quickAdd:"Adição rápida (Estoque)",quantity:"Quantidade",stock:"Estoque",configured:"Configurado",spoolsCreated:"{{count}} carretéis criados",spoolCreated:"Carretel criado",spoolUpdated:"Carretel atualizado",spoolDeleted:"Carretel excluído",spoolArchived:"Carretel arquivado",spoolRestored:"Carretel restaurado",deleteConfirm:"Tem certeza de que deseja excluir este carretel? Esta ação não pode ser desfeita.",archiveConfirm:"Tem certeza de que deseja arquivar este carretel?",advancedSettings:"Configurações Avançadas",filamentInfoTab:"Informações do Filamento",paProfileTab:"Perfil PA",filamentInfo:"Filamento",additional:"Adicional",loadingPresets:"Carregando predefinições da nuvem...",cloudConnected:"Nuvem conectada",cloudNotConnected:"Nuvem não conectada (usando padrões)",recentColors:"Recentes",searchColors:"Pesquisar cores...",searchResults:"Resultados da pesquisa",allColors:"Todas as cores",commonColors:"Cores comuns",showLess:"Mostrar menos",showAll:"Mostrar tudo",noColorsFound:"Nenhuma cor corresponde à sua pesquisa",noResults:"Nenhum resultado encontrado",extraColorsLabel:"Extra colours",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"Paste 2 to 8 hex stops, separated by commas. Renders as a gradient.",extraColorsInvalid:"Ignored invalid hex: {{tokens}}",colorEffectLabel:"Effect",colorEffect:{none:"None",sparkle:"Sparkle",wood:"Wood",marble:"Marble",glow:"Glow",matte:"Matte",silk:"Silk",galaxy:"Galaxy",rainbow:"Rainbow",metal:"Metal",translucent:"Translucent",gradient:"Gradient",dualColor:"Dual Color",triColor:"Tri Color",multicolor:"Multicolor"},selectMaterialFirst:"Por favor, selecione um material primeiro na aba Informações do Filamento.",noPrintersConfigured:"Nenhuma impressora configurada. Adicione impressoras para usar perfis PA.",matchingFilter:"Correspondente",anyBrand:"Qualquer marca",anyVariant:"Qualquer variante",autoSelect:"Seleção automática",matches:"correspondências",match:"correspondência",noMatches:"Nenhuma correspondência",connected:"Conectado",offline:"Offline",printerOffline:"A impressora está offline. Conecte-se para visualizar os perfis de calibração.",noKProfilesMatch:"Nenhum K-perfil corresponde ao filamento selecionado.",leftNozzle:"Bico Esquerdo",rightNozzle:"Bico Direito",profilesSelected:"perfil(is) de calibração selecionado(s)",totalInventory:"Inventário Total",totalConsumed:"Total Consumido",byMaterial:"Por Material",inPrinter:"Na Impressora",lowStock:"Estoque Baixo",sinceTracking:"Desde o início do rastreamento",loadedInAms:"Carregado no AMS/Ext",remaining:"Restante",weightCheck:"Verificação de Peso",lastWeighed:"Última pesagem",neverWeighed:"Nunca pesado",search:"Pesquisar carretéis...",showing:"Mostrando",to:"até",of:"de",show:"Mostrar",spools:"carretéis",spool:"carretel",page:"Página",noSpoolsMatch:"Nenhum resultado encontrado",noSpoolsMatchDesc:"Tente ajustar sua pesquisa ou filtros para encontrar o que você está procurando.",active:"Ativo",archived:"Arquivado",all:"Todos",used:"Usado",new:"Novo",clearFilters:"Limpar filtros",table:"Tabela",cards:"Cartões",net:"Líquido",groupSimilar:"Agrupar",groupedSpools:"{{count}} carretéis idênticos",groupedRows:"linhas",columns:"Colunas",configureColumns:"Configurar Colunas",configureColumnsDesc:"Arraste para reordenar as colunas ou use as setas. Alterne a visibilidade com o ícone de olho.",visible:"Visível",reset:"Redefinir",cancel:"Cancelar",applyChanges:"Aplicar Alterações",moveUp:"Mover para cima",moveDown:"Mover para baixo",hideColumn:"Ocultar coluna",showColumn:"Mostrar coluna",linkToSpool:"Vincular ao Carretel",tagLinked:"Tag vinculada ao carretel",tagLinkFailed:"Falha ao vincular tag",tagAlreadyLinked:"Tag já vinculada a outro carretel",unknownTag:"Tag RFID desconhecida detectada",usageHistory:"Histórico de Uso",noUsageHistory:"Nenhum uso registrado ainda",printName:"Nome da Impressão",weightConsumed:"Peso Consumido",clearHistory:"Limpar",historyCleared:"Histórico de uso limpo",fillSourceLabel:"(Inv)",lowStockThresholdError:"O limite deve estar entre 0.1 e 99.9",assignMismatchTitle:"Incompatibilidade de material",assignMismatchMessage:'O material do carretel selecionado "{{spoolMaterial}}" não corresponde ao material da bandeja "{{trayMaterial}}" para {{location}}. Atribuir mesmo assim?',assignMismatchConfirm:"Atribuir mesmo assim",assignPartialMismatchMessage:'O material do carretel "{{spoolMaterial}}" é semelhante, mas não corresponde exatamente a "{{trayMaterial}}" em {{location}}. Deseja prosseguir?',assignProfileMismatchMessage:'O perfil do carretel "{{spoolProfile}}" não corresponde ao perfil da bandeja "{{trayProfile}}" em {{location}}. Deseja prosseguir?'},timelapse:{title:"Timelapse",create:"Criar Timelapse",download:"Baixar",delete:"Excluir",preview:"Visualizar",frameRate:"Taxa de Quadros",quality:"Qualidade",processing:"Processando...",noTimelapses:"Nenhum timelapse disponível"},ams:{title:"AMS",slot:"Slot",empty:"Vazio",emptySlot:"Slot vazio",unknown:"Desconhecido",humidity:"Umidade",temperature:"Temperatura",filamentType:"Tipo de Filamento",filamentColor:"Cor",remaining:"Restante",history:"Histórico do AMS",noHistory:"Nenhum histórico disponível",configureSlot:"Configurar Slot",externalSpool:"Carretel Externo",profile:"Perfil",kFactor:"Fator K",fill:"Preencher",configure:"Configurar",used:"usado",remainingUnit:"restante"},printModal:{title:"Iniciar Impressão",selectPrinter:"Selecionar Impressora",selectPlate:"Selecionar Placa",filamentMapping:"Mapeamento de Filamento",totalCost:"Custo total:",slotRemainingShort:" - {{grams}}g rest.",printSettings:"Configurações de Impressão",bedLeveling:"Nivelamento da Mesa",flowCalibration:"Calibração de Fluxo",vibrationCalibration:"Calibração de Vibração",layerInspection:"Inspeção da Primeira Camada",timelapse:"Timelapse",startPrint:"Iniciar Impressão",addToQueue:"Adicionar à Fila",cancel:"Cancelar",noPrintersAvailable:"Nenhuma impressora disponível",printerBusy:"Impressora ocupada",printerOffline:"Impressora offline",sameTypeDifferentColor:"Mesmo tipo, cor diferente",filamentTypeNotLoaded:"Tipo de filamento não carregado",openCalendar:"Abrir calendário",leftNozzle:"L",rightNozzle:"R",leftNozzleTooltip:"Bico esquerdo",rightNozzleTooltip:"Bico direito",filamentOverride:"Substituição de Filamento",filamentOverrideHint:"Substitua opcionalmente os filamentos para atribuição baseada em modelo. O agendador usará os filamentos selecionados em vez dos valores originais do 3MF.",originalFilament:"Original",overrideWith:"Substituir por",resetToOriginal:"Restaurar original",insufficientFilamentTitle:"Filamento insuficiente",insufficientFilamentMessage:"Alguns dos carretéis atribuídos têm menos filamento restante do que o necessário para esta impressão:",insufficientFilamentLine:"{{printer}} - {{slot}}: necessário {{required}}g, restante {{remaining}}g",printAnyway:"Imprimir mesmo assim",forceColorMatch:"Forçar correspondência de cor",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"Escalonar para {{count}} impressoras",gcodeInjection:"Injetar G-code de auto-impressão"},backup:{title:"Bakup e Restauração",createBackup:"Criar Backup",restoreBackup:"Restaurar Backup",restoreDescription:"Substituir todos os dados a partir de um arquivo de backup",downloadBackup:"Baixar Backup",uploadBackup:"Enviar Backup",lastBackup:"Último Backup",autoBackup:"Auto Backup",backupNow:"Fazer Backup Agora",restoreWarning:"Aviso: Restaurar um backup substituirá todos os dados atuais.",includeArchives:"Incluir Arquivos",includeSettings:"Incluir Configurações",includeProfiles:"Incluir Perfis",backupSuccess:"Backup criado com sucesso",restoreSuccess:"Backup restaurado com sucesso",backupFailed:"Falha ao criar backup",restoreFailed:"Falha ao restaurar backup",restoreNote:"A impressora virtual será parada durante a restauração",githubBackup:"Backup GitHub",enabled:"Ativado",cloudLoginRequired:"Login no Bambu Cloud necessário. Entre em Perfis → Perfis Cloud para ativar o backup GitHub.",cloudLoginRequiredShort:"Login Cloud necessário",githubDescription:"Sincronize automaticamente seus perfis com um repositório GitHub privado para backup e histórico de versões.",repositoryUrl:"URL do repositório",personalAccessToken:"Token de acesso pessoal",tokenSaved:"(salvo)",enterNewToken:"Digite um novo token para atualizar",tokenHint:"Token de granularidade fina com permissão de leitura/escrita de conteúdo",branch:"Branch",manualOnly:"Apenas manual",hourly:"A cada hora",daily:"Diário",weekly:"Semanal",includeInBackup:"Incluir no backup",kProfiles:"K-Perfis",kProfilesDescription:"Calibração de avanço de pressão das impressoras conectadas",noPrintersConnected:"Nenhuma impressora conectada",printersConnected:"{{connected}}/{{total}} conectadas",cloudProfiles:"Perfis Cloud",cloudProfilesDescription:"Predefinições de filamento, impressora e processo do Bambu Cloud",appSettings:"Configurações do App",appSettingsDescription:"Configuração do Bambuddy (banco de dados completo)",spoolInventory:"Inventário de bobinas",spoolInventoryDescription:"Bobinas de filamento, histórico de uso e rastreamento de custos",printArchives:"Arquivos de impressão",printArchivesDescription:"Metadados do histórico de impressão (sem arquivos gcode/3MF)",lastBackupAt:"Último backup:",noBackupsYet:"Nenhum backup ainda",next:"Próximo:",startingBackup:"Iniciando backup...",test:"Testar",enableBackup:"Ativar backup",testConnection:"Testar conexão",enterRepoUrl:"Digite a URL do repositório",enterRepoAndToken:"Digite a URL do repositório e o token de acesso",repoRequired:"A URL do repositório é obrigatória",tokenRequired:"O token de acesso é obrigatório",githubBackupEnabled:"Backup GitHub ativado",tokenUpdated:"Token atualizado",settingsSaved:"Configurações salvas",failedToSave:"Falha ao salvar: {{message}}",backupCompleteFiles:"Backup concluído - {{count}} arquivos atualizados",backupSkippedNoChanges:"Backup ignorado - sem alterações",backupFailed2:"Falha no backup: {{message}}",clearedLogs:"{{count}} logs removidos",failedToClearLogs:"Falha ao limpar logs: {{message}}",history:"Histórico",clear:"Limpar",date:"Data",status:"Status",commit:"Commit",localBackup:"Backup local",localBackupDescription:"Crie um backup completo dos seus dados do Bambuddy incluindo banco de dados, arquivos, uploads e todos os ficheiros.",downloadBackupLabel:"Baixar backup",completeBackupZip:"Backup completo: banco de dados + todos os arquivos (ZIP)",download:"Baixar",preparingBackup:"Preparando backup...",creatingArchive:"Criando arquivo de backup... Isso pode demorar para backups grandes.",downloadingFile:"Baixando arquivo de backup...",backupDownloaded:"Backup baixado com sucesso",failedToCreateBackup:"Falha ao criar backup: {{message}}",restore:"Restaurar",restoreReplacesAll:"A restauração substitui todos os dados.",restoreReplacesAllDetail:"Seu banco de dados e arquivos atuais serão completamente substituídos. É necessário reiniciar após a restauração.",restoreConfirmTitle:"Restaurar backup",restoreConfirmMessage:'Tem certeza de que deseja restaurar de "{{filename}}"? Isso substituirá completamente seu banco de dados e todos os arquivos. O aplicativo precisará ser reiniciado após a restauração.',restoreConfirmButton:"Restaurar backup",uploadingFile:"Enviando arquivo de backup...",backupRestoredRestart:"Backup restaurado. Por favor, reinicie o Bambuddy.",failedToRestore:"Falha ao restaurar backup. Verifique o formato do arquivo.",reloadNow:"Recarregar agora",creatingBackup:"Criando backup",restoringBackup:"Restaurando backup",preparing:"Preparando...",processing:"Processando...",doNotClosePage:"Por favor, não feche esta página nem navegue para outro lugar. Esta operação pode levar vários minutos para backups grandes.",restoring:"Restaurando...",restoreComplete:"Restauração concluída",restoreFailed2:"Falha na restauração",importSettings:"Importar configurações de um arquivo de backup",pleaseWaitRestoring:"Aguarde enquanto seus dados estão sendo restaurados",selectBackupFile:"Clique para selecionar um arquivo de backup (.json ou .zip)",duplicateHandling:"Como funciona o tratamento de duplicatas:",matchPrinters:"Impressoras",matchPrintersBy:"correspondência por número de série",matchSmartPlugs:"Smart Plugs",matchSmartPlugsBy:"correspondência por endereço IP",matchNotificationProviders:"Provedores de notificação",matchNotificationProvidersBy:"correspondência por nome",matchFilaments:"Filamentos",matchFilamentsBy:"correspondência por nome + tipo + marca",matchArchives:"Arquivos",matchArchivesBy:"correspondência por hash de conteúdo (sempre ignorado)",matchPendingUploads:"Uploads pendentes",matchPendingUploadsBy:"correspondência por nome do arquivo",matchSettingsTemplates:"Configurações e modelos",matchSettingsTemplatesBy:"sempre sobrescritos",replaceExisting:"Substituir dados existentes",keepExisting:"Manter dados existentes",overwriteDescription:"Sobrescrever itens que já existem com dados do backup",keepDescription:"Restaurar apenas itens que ainda não existem",overwriteCaution:"Cuidado:",overwriteWarning:"A sobrescrita substituirá suas configurações atuais pelos dados do backup. Códigos de acesso das impressoras nunca são sobrescritos por segurança.",cancel:"Cancelar",processingBackup:"Processando arquivo de backup...",itemsRestored:"Itens restaurados",itemsSkipped:"Itens ignorados",restored:"Restaurados",skippedAlreadyExist:"Ignorados (já existem)",filesCategory:"Arquivos (3MF, miniaturas, etc.)",andMore:"...e mais {{count}}",newApiKeysGenerated:"Novas chaves API geradas",keysShownOnce:"Estas chaves são exibidas apenas uma vez. Copie-as agora!",copy:"Copiar",noDataFound:"Nenhum dado para restaurar foi encontrado no arquivo de backup.",close:"Fechar",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"Configurações",notification_providers:"Provedores de notificação",notification_templates:"Modelos de notificação",smart_plugs:"Smart Plugs",printers:"Impressoras",filaments:"Filamentos",maintenance_types:"Tipos de manutenção",archives:"Arquivos",projects:"Projetos",pending_uploads:"Uploads pendentes",external_links:"Links externos",api_keys:"Chaves API"}},tags:{title:"Tags",addTag:"Adicionar Tag",editTag:"Editar Tag",deleteTag:"Excluir Tag",tagName:"Nome da Tag",tagColor:"Cor da Tag",noTags:"Nenhuma tag",deleteConfirm:"Tem certeza de que deseja excluir esta tag?",manageTags:"Gerenciar Tags"},uploadModal:{title:"Upload Arquivos 3MF",dragDrop:"Arraste e solte arquivos .3mf aqui",or:"ou",browseFiles:"Procurar Arquivos",extractionInfo:"O modelo da impressora será extraído automaticamente dos metadados do arquivo 3MF.",uploaded:"enviado",failed:"falhou",uploading:"Enviando...",upload:"Enviar",uploadFailed:"Falha no envio"},editArchive:{title:"Editar Arquivo",name:"Nome",namePlaceholder:"Nome da impressão",printer:"Impressora",noPrinter:"Nenhuma impressora",project:"Projeto",noProject:"Nenhum projeto",itemsPrinted:"Itens Impressos",itemsPrintedHelp:"Número de itens produzidos neste trabalho de impressão",notes:"Notas",notesPlaceholder:"Adicione notas sobre esta impressão...",externalLink:"Link Externo",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"Link para Printables, Thingiverse ou outra fonte",tags:"Tags",tagsPlaceholder:"Adicionar tags...",addMoreTags:"Adicionar mais tags...",matchingTags:'Correspondendo "{{query}}"',existingTags:"Tags existentes",clickToAdd:"(clique para adicionar)",status:"Status",failureReason:"Motivo da Falha",selectReason:"Selecione o motivo...",photos:"Fotos do Resultado da Impressão",photosHelp:"Clique em + para adicionar fotos do seu resultado impresso",printResult:"Resultado da Impressão",saving:"Salvando...",failureReasons:{adhesionFailure:"Falha de adesão",spaghettiDetached:"Spaghetti / Destacado",layerShift:"Deslocamento de camada",cloggedNozzle:"Bico entupido",filamentRunout:"Fim do filamento",warping:"Warping",stringing:"Stringing",underExtrusion:"Under-extrusion",powerFailure:"Falha de energia",userCancelled:"Cancelado pelo usuário",other:"Outro"},statuses:{completed:"Concluído",failed:"Falhou",aborted:"Cancelado",printing:"Imprimindo"}},kProfiles:{title:"K-Profiles",noPrintersConfigured:"Nenhuma impressora configurada",addPrinterInSettings:"Adicione uma impressora nas Configurações para gerenciar K-profiles",noActivePrinters:"Nenhuma impressora ativa",enablePrinterConnection:"Ative a conexão da impressora para visualizar seus K-profiles",loadingProfiles:"Carregando K-Profiles...",printerOffline:"Impressora Offline",printerOfflineDesc:"A impressora selecionada não está conectada. Ligue-a para visualizar os K-profiles.",noMatchingProfiles:"Nenhum Perfil Correspondente",noMatchingProfilesDesc:"Nenhum perfil corresponde aos seus critérios de pesquisa",noKProfiles:"Nenhum K-Profile",noKProfilesDesc:"Nenhum perfil de avanço de pressão encontrado para bico de {{diameter}}mm",createFirstProfile:"Criar Primeiro Perfil",printer:"Impressora",nozzle:"Bico",refresh:"Atualizar",addProfile:"Adicionar Perfil",export:"Exportar",import:"Importar",select:"Selecionar",selectAll:"Selecionar Todos",delete:"Excluir",searchPlaceholder:"Pesquisar por nome ou filamento...",allExtruders:"Todos os Extrusores",leftOnly:"Apenas Esquerdo",rightOnly:"Apenas Direito",allFlow:"Todo Fluxo",hfOnly:"Apenas HF",sOnly:"Apenas S",sortName:"Ordenar: Nome",sortKValue:"Ordenar: Valor K",sortFilament:"Ordenar: Filamento",leftExtruder:"Extrusor Esquerdo",rightExtruder:"Extrusor Direito",modal:{addTitle:"Adicionar K-Profile",editTitle:"Editar K-Profile",profileName:"Nome do Perfil",profileNamePlaceholder:"Meu Perfil PLA",kValue:"Valor K",kValuePlaceholder:"0.020",kValueHelp:"Faixa típica: 0.01 - 0.06 para PLA, 0.02 - 0.10 para PETG",filament:"Filamento",selectFilament:"Selecionar filamento...",noFilamentsHelp:"Nenhum filamento encontrado. Crie um K-profile no Bambu Studio primeiro.",flowType:"Tipo de Fluxo",highFlow:"Alto Fluxo",standard:"Padrão",nozzleSize:"Tamanho do Bico",extruder:"Extrusor",extruders:"Extrusores",left:"Esquerdo",right:"Direito",notes:"Notas (armazenadas localmente)",notesPlaceholder:"Adicione notas sobre este perfil...",notesHelp:"As notas são salvas no Bambuddy, não na impressora",syncing:"Sincronizando com a impressora...",savingExtruder:"Salvando no extrusor {{current}}/{{total}}...",pleaseWait:"Por favor, aguarde"},deleteConfirm:{title:"Excluir Perfil",cannotUndo:"Isso não pode ser desfeito",message:'Tem certeza de que deseja excluir "{{name}}" da impressora?'},bulkDelete:{title:"Excluir Perfis",cannotUndo:"Isso não pode ser desfeito",message:"Tem certeza de que deseja excluir {{count}} perfis selecionados da impressora?"},toast:{profileSaved:"K-profile salvo",profilesSaved:"K-profile salvo em {{count}} extrusores",selectAtLeastOneExtruder:"Por favor, selecione pelo menos um extrusor",profileDeleted:"K-profile excluído",profilesDeleted:"{{count}} perfis excluídos",exportedProfiles:"{{count}} perfis exportados",importedProfiles:"{{count}} de {{total}} perfis importados",noProfilesToExport:"Nenhum perfil para exportar",invalidFileFormat:"Formato de arquivo inválido",failedToParseImport:"Falha ao analisar o arquivo de importação",failedToSaveBatch:"Falha ao salvar K-profiles",noteSaved:"Nota salva",failedToSaveNote:"Falha ao salvar nota"},permission:{noRead:"Você não tem permissão para atualizar perfis",noCreate:"Você não tem permissão para adicionar perfis",noUpdate:"Você não tem permissão para atualizar K-profiles",noDelete:"Você não tem permissão para excluir K-profiles",noExport:"Você não tem permissão para exportar perfis",noImport:"Você não tem permissão para importar perfis"}},virtualPrinter:{title:"Impressora Virtual",running:"Em execução",stopped:"Parada",description:{default:"Ative uma impressora virtual que aparece no Bambu Studio e no OrcaSlicer. Os arquivos enviados para esta impressora serão arquivados diretamente sem impressão.",proxy:"Ative um proxy que retransmite o tráfego do slicer para uma impressora real, permitindo impressão remota em qualquer rede."},enable:{title:"Ativar Impressora Virtual",visibleInSlicer:'Visível como "Bambuddy" na descoberta do slicer',proxyingTo:"Proxy para {{name}}",notActive:"Não ativo"},model:{title:"Modelo da Impressora",description:"Selecione qual modelo de impressora emular.",restartWarning:"Alterar o modelo reiniciará a impressora virtual"},accessCode:{title:"Código de acesso",isSet:"O código de acesso está definido",notSet:"Nenhum código de acesso definido — necessário para ativar.",placeholder:"Digite um código de 8 caracteres",placeholderChange:"Digite um novo código para alterar",hint:"Deve ter exatamente 8 caracteres. Usado pelos slicers para autenticação.",charCount:"({{count}}/8)"},targetPrinter:{title:"Impressora Alvo",configured:"Proxy alvo configurado",notConfigured:"Nenhuma impressora alvo selecionada - necessário para o modo proxy",placeholder:"Selecione uma impressora...",hint:"Selecione a impressora para a qual o tráfego do slicer será enviado. A impressora deve estar no modo LAN.",noPrinters:"Nenhuma impressora configurada. Adicione uma impressora primeiro para usar o modo proxy."},remoteInterface:{title:"Substituição da Interface de Rede",configured:"Substituição da interface ativa",optional:"Opcional - use se o IP detectado automaticamente estiver errado (por exemplo, várias NICs, Docker, VPN)",placeholder:"Detecção automática (padrão)...",hint:"Substitua o endereço IP anunciado via SSDP e usado no certificado TLS. Útil quando o Bambuddy possui várias interfaces de rede."},mode:{title:"Modo",archive:"Arquivar",archiveDesc:"Arquivar arquivos imediatamente",review:"Revisar",reviewDesc:"Revisar antes de arquivar",queue:"Fila",queueDesc:"Arquivar e adicionar à fila",proxy:"Proxy",proxyDesc:"Retransmitir para impressora real"},autoDispatch:{title:"Envio automático",description:"Iniciar impressões automaticamente quando adicionadas à fila. Quando desativado, as impressões aguardam envio manual."},tailscaleDisabled:{title:"Integração Tailscale",description:"Quando ativado, usa Tailscale para certificados TLS confiáveis. Desative para usar apenas certificado autoassinado."},setupRequired:{title:"Configuração Necessária",description:"O recurso de impressora virtual requer configuração adicional do sistema antes de funcionar. Isso inclui encaminhamento de portas, regras de firewall e configurações específicas da plataforma.",readGuide:"Leia o guia de configuração antes de ativar"},howItWorks:{title:"Como funciona",step1:"Complete o guia de configuração para sua plataforma",step2:"Ative a impressora virtual e defina um código de acesso",step3:'No Bambu Studio ou OrcaSlicer, vá para "Adicionar Impressora"'},status:{title:"Detalhes do Status",printerName:"Nome da Impressora",model:"Modelo",serialNumber:"Número de Série",mode:"Modo",pendingFiles:"Arquivos Pendentes",targetPrinter:"Impressora Alvo",ftpPort:"Porta FTP",mqttPort:"Porta MQTT",ftpConnections:"Conexões FTP",mqttConnections:"Conexões MQTT"},toast:{updated:"Configurações da impressora virtual atualizadas",failedToUpdate:"Falha ao atualizar as configurações",tailscaleNotAvailable:"Tailscale não está instalado neste host. Instale o Tailscale primeiro e tente novamente.",copyFailed:"Falha ao copiar — selecione o texto manualmente",accessCodeRequired:"Defina um código de acesso primeiro",targetPrinterRequired:"Selecione uma impressora alvo primeiro",bindIpRequired:"Defina um IP de ligação primeiro",accessCodeEmpty:"O código de acesso não pode estar vazio",accessCodeLength:"O código de acesso deve ter exatamente 8 caracteres",created:"Impressora virtual criada",failedToCreate:"Falha ao criar impressora virtual",deleted:"Impressora virtual excluída",failedToDelete:"Falha ao excluir impressora virtual"},list:{title:"Impressoras Virtuais",add:"Adicionar",addFirst:"Adicionar Impressora Virtual",empty:"Nenhuma impressora virtual configurada. Adicione uma para começar."},bindIp:{title:"Interface de Rede",placeholder:"Selecionar interface...",hint:"Interface de rede para esta impressora virtual. Deve ser única por impressora."},proxy:{accessCodeHint:"No modo proxy, use o código de acesso da impressora alvo no slicer. A conexão é encaminhada de forma transparente para a impressora real."},addDialog:{title:"Adicionar Impressora Virtual",name:"Nome",hint:"Você pode configurar o código de acesso, impressora alvo e outras configurações após a criação.",create:"Criar"},deleteConfirm:{title:"Excluir Impressora Virtual",message:'Tem certeza que deseja excluir "{{name}}"? Isso irá parar todos os serviços desta impressora.'},archiveNameSource:{title:"Origem do nome do arquivo",description:'Escolha como os novos arquivos são nomeados quando chegam pela impressora virtual. "Metadados" usa o título embutido pelo slicer no 3MF (padrão). "Nome do arquivo" usa o nome que o Bambu Studio enviou via FTP — útil se você renomeou o job no diálogo "enviar para impressora".',metadata:"Metadados",filename:"Nome do arquivo"}},modelViewer:{openInSlicer:"Abrir no Slicer",tabs:{model:"Modelo 3D",gcode:"Pré-visualização G-code"},notAvailable:"Não disponível",notSliced:"Não fatiado",plates:"Placas",allPlates:"Todas as Placas",plateNumber:"Placa {{number}}",plateCount:"{{count}} placa",plateCount_other:"{{count}} placas",objectCount:"{{count}} objeto",objectCount_other:"{{count}} objetos",filamentCount:"{{count}} filamento",filamentCount_other:"{{count}} filamentos",eta:"ETA {{minutes}} min",noPreview:"Pré-visualização não disponível para este arquivo",pagination:{pageOf:"Página {{current}} de {{total}}",prev:"Anterior",next:"Próximo"},errors:{failedToLoad:"Falha ao carregar o arquivo",noMeshes:"Nenhuma malha encontrada no arquivo 3MF",unsupportedFormat:"Formato de arquivo não suportado"}},maintenanceDescriptions:{lubricateCarbonRods:"Aplique lubrificante nos eixos de carbono para um movimento suave",lubricateRails:"Aplique lubrificante nos trilhos lineares para um movimento suave",cleanNozzle:"Limpe o hotend e o bico para evitar entupimentos",checkBelts:"Verifique a tensão das correias para impressões precisas",cleanBuildPlate:"Limpe a placa de construção para melhor adesão",checkExtruder:"Verifique as engrenagens do extrusor quanto ao desgaste",checkCooling:"Verifique se os ventiladores de resfriamento estão funcionando corretamente",generalInspection:"Inspeção geral da impressora",cleanCarbonRods:"Limpe os eixos de carbono para reduzir o atrito",lubricateSteelRods:"Aplique lubrificante nas barras de aço para um movimento suave",cleanSteelRods:"Limpe as barras de aço para reduzir o atrito",cleanLinearRails:"Limpe os trilhos lineares para remover poeira e detritos",checkPtfeTube:"Verifique o tubo PTFE quanto ao desgaste ou danos",replaceHepaFilter:"Substitua o filtro HEPA para qualidade do ar",replaceCarbonFilter:"Substitua o filtro de carbono ativado",lubricateLeftNozzleRail:"Lubrifique o trilho do bico esquerdo (série H2)"},smartPlugs:{offline:"Offline",admin:"Admin",openPlugAdminPage:"Abrir o painel de administração da tomada inteligente",deleteSmartPlug:"Excluir Tomada Inteligente",turnOnSmartPlug:"Ligar Tomada Inteligente",turnOffSmartPlug:"Desligar Tomada Inteligente",turnOn:"Ligar",turnOff:"Desligar",addSmartPlug:{scanningNetwork:"Procurando na rede...",chooseEntity:"Escolha uma entidade...",connectionFailed:"Falha na conexão",searchEntities:"Pesquisar entidades...",searchPowerSensors:"Pesquisar sensores de energia...",searchEnergySensors:"Pesquisar sensores de energia...",placeholders:{plugName:"Tomada da Sala",mqttStateOnValue:"ON, true, 1",mqttSameAsPower:"Mesmo que o tópico de energia, ou diferente"}},linkedTo:"Vinculado a:",monitorOnly:"Apenas monitoramento",alerts:"Alertas",scheduleOn:"Ligar {{time}}",scheduleOff:"Desligar {{time}}",on:"Ligado",off:"Desligado",power:"Potência",kwhToday:"kWh Hoje",settings:"Configurações",automationSettings:"Configurações de automação",showInSwitchbar:"Mostrar na barra de interruptores",quickAccessSidebar:"Acesso rápido pela barra lateral",enabled:"Ativado",enableAutomation:"Ativar automação para este plugue",autoOn:"Auto Ligar",autoOnDescription:"Ligar quando a impressão iniciar",autoOff:"Auto Desligar",autoOffDescription:"Desligar quando a impressão terminar (única vez)",autoOffPersistent:"Manter ativado",autoOffPersistentDescription:"Permanecer ativado entre impressões em vez de única vez",turnOffDelayMode:"Modo de atraso para desligar",time:"Tempo",temp:"Temp",delayMinutes:"Atraso (minutos)",tempThreshold:"Limite de temperatura (°C)",tempThresholdDescription:"Desliga quando o bico esfria abaixo desta temperatura",edit:"Editar",deleteConfirm:'Tem certeza que deseja excluir "{{name}}"? Esta ação não pode ser desfeita.',turnOnConfirm:'Tem certeza que deseja ligar "{{name}}"?',turnOffConfirm:'Tem certeza que deseja desligar "{{name}}"? Isso cortará a energia do dispositivo conectado.',failedToTurn:'Falha ao {{action}} "{{name}}"',unknown:"Desconhecido",addTitle:"Adicionar plugue inteligente",editTitle:"Editar plugue inteligente",stopScanning:"Parar varredura",discoverTasmota:"Descobrir dispositivos Tasmota",foundDevices:"{{count}} dispositivo(s) encontrado(s) - clique para selecionar:",noDevicesFound:"Nenhum dispositivo Tasmota encontrado na sua rede",haNotConfigured:"Home Assistant não está configurado. Configure em",haSettingsPath:"Configurações → Rede → Home Assistant",selectEntity:"Selecionar entidade *",ipAddress:"Endereço IP *",nameLabel:"Nome *",username:"Usuário",password:"Senha",authHint:"Deixe vazio se seu dispositivo Tasmota não requer autenticação",linkToPrinter:"Vincular à impressora",noPrinter:"Sem impressora (apenas controle manual)",linkingDescription:"A vinculação permite ligar/desligar automaticamente ao iniciar/terminar impressão",powerAlerts:"Alertas de potência",alertAbove:"Alertar se acima (W)",alertBelow:"Alertar se abaixo (W)",alertDescription:"Receba notificações quando o consumo de energia ultrapassar estes limites. Deixe vazio para desativar essa direção.",dailySchedule:"Programação diária",turnOnAt:"Ligar às",turnOffAt:"Desligar às",scheduleDescription:"Ligar/desligar automaticamente o plugue nestes horários diariamente. Deixe vazio para pular essa ação.",showOnPrinterCard:"Mostrar no cartão da impressora",displayOnPrinterCard:"Exibir botão no cartão da impressora",connectedResult:"Conectado!",deviceLabel:"Dispositivo: {{name}} - ",stateLabel:"Estado: {{state}}",test:"Testar",delete:"Excluir",save:"Salvar",add:"Adicionar",cancel:"Cancelar",failedToStartScan:"Falha ao iniciar varredura",nameRequired:"Nome é obrigatório",entityRequired:"Entidade é obrigatória para plugues Home Assistant",mqttTopicRequired:"Pelo menos um tópico MQTT deve ser configurado para potência, energia ou monitoramento de estado",loadingEntities:"Carregando entidades...",loading:"Carregando...",failedToLoadEntities:"Falha ao carregar entidades: {{error}}",noEntitiesMatching:'Nenhuma entidade encontrada correspondente a "{{search}}"',noEntitiesAvailable:"Nenhuma entidade disponível",searchingEntities:"Buscando todas as entidades ({{count}} encontradas)",showingEntities:"Mostrando switch, light, input_boolean ({{count}} disponíveis)",energyMonitoringOptional:"Monitoramento de energia (Opcional)",energyMonitoringHint:"Pesquise e selecione sensores que fornecem dados de potência/energia.",powerSensorW:"Sensor de potência (W)",energyTodayKwh:"Energia hoje (kWh)",totalEnergyKwh:"Energia total (kWh)",noMatchingSensors:"Nenhum sensor correspondente",none:"Nenhum",mqttNotConfigured:"Broker MQTT não configurado. Defina o endereço do broker em",mqttSettingsPath:"Configurações → Rede → Publicação MQTT",mqttNotConfiguredSuffix:"(você não precisa ativar a publicação, apenas preencha os detalhes do broker).",mqttMonitorOnlyDescription:"Plugues MQTT recebem dados de potência/energia via assinatura MQTT. O controle liga/desliga não está disponível - use seu broker MQTT ou sistema de automação residencial.",powerMonitoring:"Monitoramento de potência",energyMonitoring:"Monitoramento de energia",stateMonitoring:"Monitoramento de estado",optional:"opcional",topic:"Tópico",jsonPath:"Caminho JSON",multiplier:"Multiplicador",onValue:"Valor ON",mqttPowerHint:`O caminho JSON extrai o valor do payload JSON (ex: "power_l1"). Deixe vazio se o tópico publica valores numéricos brutos.
 Use multiplicador 0.001 para mW→W, 1000 para kW→W.`,mqttEnergyHint:`O caminho JSON extrai o valor do payload JSON. Deixe vazio para valores brutos.
 Use multiplicador 0.001 para Wh→kWh, 1000 para MWh→kWh.`,mqttStateHint:`O caminho JSON extrai o valor do payload JSON. Deixe vazio para valores brutos.
-Valor ON: a string exata que significa "ON". Deixe vazio para detecção automática (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"URL de potência",restPowerPath:"Power JSON Path",restPowerMultiplier:"Multiplicador de potência",restEnergyUrl:"URL de energia",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Multiplicador de energia",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"URL separada para dados de potência (usa a URL de status se vazio)",restEnergyUrlHint:"URL separada para dados de energia (usa a URL de status se vazio)",restEnergyHint:"Cada valor pode usar sua própria URL ou recorrer à URL de status. Use multiplicadores para conversão de unidades (ex: 0.001 para converter Wh em kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"Nenhum interruptor na barra",enableSwitchbarHint:'Ative "Mostrar na barra de interruptores" em Configurações > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notificações por e-mail SMTP",telegram:"Notificações via bot do Telegram",discord:"Enviar para canal do Discord via webhook",ntfy:"Notificações push gratuitas e auto-hospedáveis",pushover:"Notificações push simples e confiáveis",callmebot:"Notificações gratuitas via WhatsApp pelo CallMeBot",webhook:"POST HTTP genérico para qualquer URL",homeassistant:"Notificações persistentes no painel do Home Assistant"},lastSuccess:"Último: {{date}}",error:"Erro",printer:"Impressora:",allPrinters:"Todas as impressoras",sendTestNotification:"Enviar Notificação de Teste",eventSettings:"Configurações de Eventos",enabled:"Ativado",sendFromProvider:"Enviar notificações deste provedor",printEvents:"Eventos de Impressão",printerStatus:"Status da Impressora",amsAlarms:"Alarmes do AMS",amsHtAlarms:"Alarmes do AMS-HT",printQueue:"Fila de Impressão",start:"Início",plateCheck:"Verificação da Mesa",complete:"Concluído",failed:"Falhou",stopped:"Parado",progress:"Progresso",offline:"Offline",lowFilament:"Filamento Baixo",maintenance:"Manutenção",amsHumidity:"Umidade do AMS",amsTemp:"Temp. do AMS",amsHtHumidity:"Umidade do AMS-HT",amsHtTemp:"Temp. do AMS-HT",bedCooled:"Mesa Resfriada",firstLayer:"Primeira camada",quiet:"Silencioso",digest:"Resumo {{time}}",printStarted:"Impressão Iniciada",plateNotEmpty:"Mesa Não Vazia",plateNotEmptyDescription:"Objetos detectados antes da impressão",printCompleted:"Impressão Concluída",bedCooledLabel:"Mesa Resfriada",bedCooledDescription:"Mesa resfriou abaixo do limite após a impressão",firstLayerCompleteLabel:"Primeira camada concluída",firstLayerCompleteDescription:"Notificar com foto quando a primeira camada terminar",missingSpoolAssignmentLabel:"Atribuição de bobina ausente",missingSpoolAssignmentDescription:"Notificar quando a impressão iniciar e bandejas necessárias não tiverem bobina atribuída",printFailed:"Impressão Falhou",printStopped:"Impressão Parada",progressMilestones:"Marcos de Progresso",progressMilestonesDescription:"Notificar em 25%, 50%, 75%",printerOffline:"Impressora Offline",printerError:"Erro da Impressora",lowFilamentLabel:"Filamento Baixo",maintenanceDue:"Manutenção Necessária",maintenanceDueDescription:"Notificar quando manutenção for necessária",amsHumidityHigh:"Umidade Alta do AMS",amsHumidityHighDescription:"Umidade do AMS regular excede o limite",amsTemperatureHigh:"Temperatura Alta do AMS",amsTemperatureHighDescription:"Temperatura do AMS regular excede o limite",amsHtHumidityHigh:"Umidade Alta do AMS-HT",amsHtHumidityHighDescription:"Umidade do AMS-HT excede o limite",amsHtTemperatureHigh:"Temperatura Alta do AMS-HT",amsHtTemperatureHighDescription:"Temperatura do AMS-HT excede o limite",jobAdded:"Trabalho Adicionado",jobAddedDescription:"Trabalho adicionado à fila",jobAssigned:"Trabalho Atribuído",jobAssignedDescription:"Trabalho baseado em modelo atribuído à impressora",jobStarted:"Trabalho Iniciado",jobStartedDescription:"Trabalho da fila começou a imprimir",jobWaiting:"Trabalho Aguardando",jobWaitingDescription:"Trabalho aguardando filamento ou impressora",jobSkipped:"Trabalho Pulado",jobSkippedDescription:"Trabalho pulado (anterior falhou)",jobFailed:"Trabalho Falhou",jobFailedDescription:"Trabalho falhou ao iniciar",queueComplete:"Fila Concluída",queueCompleteDescription:"Todos os trabalhos da fila finalizados",quietHours:"Horário de Silêncio",noNotificationsDuring:"Sem notificações durante essas horas",editProviderToChangeQuietHours:"Edite o provedor para alterar o horário de silêncio",dailyDigest:"Resumo Diário",batchNotifications:"Agrupar notificações em um único resumo diário",sendAt:"Enviar às {{time}}",editProviderToChangeDigestTime:"Edite o provedor para alterar o horário do resumo",edit:"Editar",deleteProvider:"Excluir Provedor de Notificação",deleteConfirm:'Tem certeza que deseja excluir "{{name}}"? Isso não pode ser desfeito.',delete:"Excluir",addTitle:"Adicionar Provedor de Notificação",editTitle:"Editar Provedor de Notificação",nameLabel:"Nome *",namePlaceholder:"Minhas Notificações",providerTypeLabel:"Tipo de Provedor *",configuration:"Configuração",testConfiguration:"Testar Configuração",printerFilter:"Filtro de Impressora",onlyFromPrinter:"Enviar notificações apenas para eventos desta impressora",quietHoursDnd:"Horário de Silêncio (Não Perturbe)",quietStart:"Início",quietEnd:"Fim",dailyDigestLabel:"Resumo Diário",sendDigestAt:"Enviar resumo às",digestCollected:"Os eventos serão coletados e enviados como um único resumo neste horário",notificationEvents:"Eventos de Notificação",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(após conclusão da impressão)",eventPriority:{sectionTitle:"Prioridade ntfy",helpNtfy:"Escolha uma prioridade para cada evento habilitado. O ntfy usa isso para escalar alertas (som, visibilidade, comportamento push). Níveis não definidos aqui usam o padrão do servidor ntfy.",min:"Mín",low:"Baixa",default:"Padrão",high:"Alta",urgent:"Urgente"},cancel:"Cancelar",save:"Salvar",add:"Adicionar",nameRequired:"Nome é obrigatório",fieldRequired:"{{field}} é obrigatório",phoneNumber:"Número de Telefone",apiKey:"Chave da API",serverUrl:"URL do Servidor",topic:"Tópico",authToken:"Token de Autenticação",userKey:"Chave do Usuário",appToken:"Token do Aplicativo",priority:"Prioridade",botToken:"Token do Bot",chatId:"ID do Chat",smtpServer:"Servidor SMTP",smtpPort:"Porta SMTP",security:"Segurança",authentication:"Autenticação",username:"Usuário",password:"Senha",fromEmail:"E-mail de Origem",toEmail:"E-mail de Destino",webhookUrl:"URL do Webhook",payloadFormat:"Formato do Payload",authorization:"Autorização",titleFieldName:"Nome do Campo de Título",messageFieldName:"Nome do Campo de Mensagem",editTemplate:"Editar Modelo: {{name}}",titleLabel:"Título",bodyLabel:"Corpo",titlePlaceholder:"Título da notificação...",bodyPlaceholder:"Corpo da notificação...",availableVariables:"Variáveis Disponíveis",clickToInsert:"Clique para inserir na posição do cursor no corpo",livePreview:"Pré-visualização ao Vivo",hide:"Ocultar",show:"Mostrar",loadingPreview:"Carregando pré-visualização...",enterTemplateContent:"Insira o conteúdo do modelo para ver a pré-visualização",titlePreview:"Título:",bodyPreview:"Corpo:",resetToDefault:"Restaurar Padrão",titleRequired:"Título é obrigatório",bodyRequired:"Corpo é obrigatório",notificationLog:"Registro de Notificações",showFailedOnly:"Apenas falhas",last24Hours:"Últimas 24 horas",last7Days:"Últimos 7 dias",last30Days:"Últimos 30 dias",last90Days:"Últimos 90 dias",justNow:"Agora mesmo",noFailedNotifications:"Nenhuma notificação com falha",noNotificationsLogged:"Nenhuma notificação registrada",unknownProvider:"Provedor Desconhecido",logTitle:"Título",logMessage:"Mensagem",logError:"Erro",logProvider:"Provedor: {{type}}",logTime:"Hora: {{time}}",refresh:"Atualizar",clearOld:"Limpar Antigos",statsSummary:"Últimos {{days}} dias:",statsNotifications:"notificações",statsSent:"{{count}} enviadas",statsFailed:"{{count}} com falha",eventTypes:{print_start:"Impressão Iniciada",print_complete:"Impressão Concluída",print_failed:"Impressão Falhou",print_stopped:"Impressão Parada",print_progress:"Progresso",printer_offline:"Impressora Offline",printer_error:"Erro da Impressora",filament_low:"Filamento Baixo",maintenance_due:"Manutenção Necessária",test:"Teste"},userEmail:{title:"Notificações",emailNotifications:"Notificações por E-mail",emailNotificationsDesc:"Receba notificações por e-mail para seus próprios trabalhos de impressão. Os e-mails são enviados usando as configurações SMTP definidas na Autenticação Avançada.",sendingTo:"As notificações serão enviadas para",noEmailWarning:"Sua conta não tem um endereço de e-mail. Entre em contato com um administrador para adicionar um.",printJobNotifications:"Notificações de Trabalhos de Impressão",printJobNotificationsDesc:"Escolha quais eventos acionam notificações por e-mail para os trabalhos de impressão que você envia.",printJobStarts:"Início do Trabalho de Impressão",printJobStartsDesc:"Ser notificado quando seu trabalho de impressão começar.",printJobFinishes:"Conclusão do Trabalho de Impressão",printJobFinishesDesc:"Ser notificado quando seu trabalho de impressão concluir com sucesso.",printErrors:"Erros de Impressão",printErrorsDesc:"Ser notificado quando seu trabalho de impressão falhar ou encontrar um erro.",printJobStops:"Trabalho de Impressão Parado",printJobStopsDesc:"Ser notificado quando seu trabalho de impressão for cancelado ou parado.",saveSuccess:"Preferências de notificação salvas.",saveError:"Falha ao salvar preferências de notificação."}},richTextEditor:{bold:"Negrito",italic:"Itálico",underline:"Sublinhado",bulletList:"Lista com marcadores",numberedList:"Lista numerada",alignLeft:"Alinhar à esquerda",alignCenter:"Centralizar",alignRight:"Alinhar à direita",addLink:"Adicionar link",removeLink:"Remover link"},externalLinks:{noLinksConfigured:"Nenhum link externo configurado",deleteLink:"Excluir link",removeCustomIcon:"Remover ícone personalizado",openInNewTab:"Abrir em nova aba",placeholders:{linkName:"Meu Link"}},keyboardShortcuts:{title:"Atalhos de Teclado",navigation:"Navegação",archivesSection:"Arquivos",kProfilesSection:"K-Profiles",generalSection:"Geral",shortcuts:{goToPrinters:"Ir para Impressoras",goToArchives:"Ir para Arquivos",goToQueue:"Ir para Fila",goToStats:"Ir para Estatísticas",goToProfiles:"Ir para Perfis na Nuvem",goToSettings:"Ir para Configurações",focusSearch:"Focar na pesquisa",openUploadModal:"Abrir modal de upload",clearSelection:"Limpar seleção / desfocar input",contextMenu:"Menu de contexto nos cartões",refreshProfiles:"Atualizar perfis",newProfile:"Novo perfil",exitSelectionMode:"Sair do modo de seleção",showHelp:"Mostrar esta ajuda"},footer:"Pressione Esc ou clique fora para fechar"},notificationLog:{title:"Registro de Notificações",events:{printStarted:"Impressão Iniciada",printComplete:"Impressão Concluída",printFailed:"Impressão Falhou",printStopped:"Impressão Interrompida",progress:"Progresso",printerOffline:"Impressora Offline",printerError:"Erro na Impressora",lowFilament:"Filamento Baixo",maintenanceDue:"Manutenção Pendente",test:"Teste"},timeAgo:{justNow:"Agora mesmo",minutesAgo:"há {{minutes}} minutos",hoursAgo:"há {{hours}} horas"}},restoreBackup:{title:"Restaurar Backup",restoring:"Restaurando...",restoreComplete:"Restauração Concluída",restoreFailed:"Falha na Restauração",importSettings:"Importar configurações de um arquivo de backup",pleaseWait:"Aguarde enquanto seus dados estão sendo restaurados",clickToSelect:"Clique para selecionar o arquivo de backup (.json ou .zip)",howDuplicateHandling:"Como funciona o tratamento de duplicatas:",categories:{printers:"Impressoras",smartPlugs:"Tomadas Inteligentes",notificationProviders:"Provedores de Notificação",filaments:"Filamentos",archives:"Arquivos",pendingUploads:"Uploads Pendentes",settingsTemplates:"Configurações e Modelos"},matchingInfo:{printers:"correspondem pelo número de série",smartPlugs:"correspondem pelo endereço IP",notificationProviders:"correspondem pelo nome",filaments:"correspondem pelo nome + tipo + marca",archives:"correspondem pelo hash do conteúdo",pendingUploads:"correspondem pelo nome do arquivo",settingsTemplates:"sempre sobrescrito"},replaceExisting:"Substituir dados existentes",keepExisting:"Manter dados existentes",replaceDescription:"Substituir itens que já existem com os dados do backup",keepDescription:"Restaurar apenas itens que não existem",caution:"Atenção:",cautionText:"Sobrescrever substituirá suas configurações atuais pelos dados do backup. Os códigos de acesso da impressora nunca são sobrescritos por segurança.",itemsRestored:"Itens Restaurados",itemsSkipped:"Itens Ignorados",restored:"Restaurado",skipped:"Ignorado (já existe)",filesLabel:"Arquivos (3MF, miniaturas, etc.)",newApiKeysGenerated:"Novas Chaves API Geradas",newApiKeysWarning:"Essas chaves são exibidas apenas uma vez. Copie-as agora!",processingBackup:"Processando arquivo de backup...",noDataFound:"Nenhum dado foi encontrado para restaurar no arquivo de backup.",failedToRestore:"Falha ao restaurar o backup. Verifique o formato do arquivo."},backupExport:{title:"Exportar Backup",selectData:"Selecione os dados a incluir",selectAll:"Selecionar Todos",selectNone:"Selecionar Nenhum",categoryDescriptions:{settings:"Idioma, tema, preferências de atualização",notifications:"ntfy, Pushover, Discord, etc.",templates:"Modelos de mensagens personalizadas",smartPlugs:"Configurações de tomadas Tasmota",externalLinks:"Links da barra lateral para serviços externos",printers:"Informações da impressora (códigos de acesso excluídos)",plateDetection:"Imagens de referência de placa vazia",filaments:"Tipos e custos de filamento",maintenance:"Cronogramas de manutenção personalizados",archives:"Todos os dados de impressão + arquivos (3MF, miniaturas, fotos)",projects:"Projetos, itens de BOM e anexos",pendingUploads:"Uploads de impressora virtual aguardando revisão",apiKeys:"Chaves API de webhook (novas chaves geradas na importação)"},requiresPrinters:"Requer que as impressoras sejam selecionadas",zipFileWarning:"Um arquivo ZIP será criado.",zipFileDescription:"Inclui todos os arquivos 3MF, miniaturas, timelapses e fotos. Isso pode levar algum tempo e resultar em um arquivo grande.",includeAccessCodes:"Incluir Códigos de Acesso",includeAccessCodesDescription:"Para transferir para outra máquina",includeAccessCodesWarning:"Os códigos de acesso serão incluídos em texto simples. Mantenha este arquivo de backup seguro!",categoriesSelected:"{{selectedCount}} categorias selecionadas"},pendingUploads:{placeholders:{notes:"Adicione notas sobre esta impressão..."},discardUpload:"Descartar Upload",archiveAllUploads:"Arquivar Todos os Uploads",discardAllUploads:"Descartar Todos os Uploads",archive:"Arquivar",timeAgo:{justNow:"Agora mesmo",minutesAgo:"há {{minutes}} minutos",hoursAgo:"há {{hours}} horas",daysAgo:"há {{days}} dias"}},apiBrowser:{placeholders:{requestBody:"Corpo da requisição JSON...",searchEndpoints:"Pesquisar endpoints..."}},configureAmsSlot:{title:"Configurar Slot AMS",slotConfigured:"Slot Configurado!",configuringSlot:"Configurando slot:",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Pesquisar predefinições...",colorPlaceholder:"Nome da cor ou hex (ex.: marrom, FF8800)",clearCustomColor:"Limpar cor personalizada",noCloudPresets:"Nenhuma predefinição na nuvem. Faça login no Bambu Cloud para sincronizar.",noPresetsAvailable:"Nenhuma predefinição disponível. Faça login no Bambu Cloud ou importe perfis locais.",noMatchingPresets:"Nenhuma predefinição correspondente encontrada.",custom:"Personalizado",builtin:"Integrado",settingsSentToPrinter:"Configurações enviadas para a impressora",filamentProfile:"Perfil de Filamento",kProfileLabel:"Perfil K (Avanço de Pressão)",filteringFor:"Filtrando por: {{material}}",noKProfile:"Nenhum perfil K (usar padrão 0.020)",noMatchingKProfiles:"Nenhum perfil K correspondente encontrado. O K padrão=0.020 será usado.",selectFilamentFirst:"Selecione um perfil de filamento primeiro",kFromCalibration:"K={{value}} da calibração da impressora",customColorLabel:"Cor Personalizada (opcional)",presetColors:"Cores de {{name}}:",showLessColors:"Mostrar menos cores",showMoreColors:"Mostrar mais cores",clear:"Limpar",hexLabel:"Hex: #{{hex}}",resetting:"Redefinindo...",resetSlot:"Redefinir Slot",cancel:"Cancelar",configuring:"Configurando...",configureSlot:"Configurar Slot"},githubBackup:{title:"Backup do GitHub",history:"Histórico",downloadBackup:"Baixar Backup",restoreBackup:"Restaurar Backup",noBackupsYet:"Nenhum backup ainda"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Pesquisar tags...",renameTag:"Renomear tag",deleteTag:"Excluir tag"},notificationTemplates:{placeholders:{title:"Título da notificação...",body:"Corpo da notificação..."}},batchTag:{placeholders:{newTag:"Digite uma nova tag..."}},photoGallery:{deletePhoto:"Excluir foto"},filamentHoverCard:{copySpoolUuid:"Copiar UUID do carretel"},kProfilesView:{hasNote:"Possui nota",copyProfile:"Copiar perfil"},layout:{openMenu:"Abrir menu",noPermissionSystemInfo:"Você não tem permissão para visualizar informações do sistema"},dashboard:{dragToReorder:"Arrastar para reordenar",hideWidget:"Ocultar widget"},notificationProviderCard:{deleteNotificationProvider:"Excluir provedor de notificação"},fileManagerModal:{closeFileManager:"Fechar gerenciador de arquivos",sortFiles:"Ordenar arquivos",goToParentFolder:"Ir para a pasta pai",threeView:"Visualização 3D"},embeddedCameraViewer:{refreshStream:"Atualizar stream",close:"Fechar",zoomOut:"Reduzir zoom",resetZoom:"Redefinir zoom",zoomIn:"Aumentar zoom",dragToResize:"Arrastar para redimensionar"},timelapseViewer:{skipBack5s:"Voltar 5s",skipForward5s:"Avançar 5s"},notificationProviders:{descriptions:{email:"Notificações por email SMTP",telegram:"Notificações via bot do Telegram",discord:"Enviar para canal do Discord via webhook",ntfy:"Notificações push gratuitas e auto-hospedáveis",pushover:"Notificações push simples e confiáveis",callmebot:"Notificações gratuitas via WhatsApp pelo CallMeBot",webhook:"POST HTTP genérico para qualquer URL"}},logViewer:{searchPlaceholder:"Pesquisar mensagem ou nome do logger...",noLogEntries:"Nenhuma entrada de log encontrada"},switchbarPopover:{noSwitchesInSwitchbar:"Nenhum switch na barra de switches"},projectPageModal:{placeholders:{title:"Título",designer:"Designer",license:"Licença",description:"Digite a descrição...",profileTitle:"Título do perfil",profileDescription:"Descrição do perfil..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Aguardando",justNow:"Agora mesmo",now:"Agora",minsAgo:"{{count}}min atrás",inMins:"em {{count}}min",hoursAgo:"{{count}}h atrás",inHours:"em {{count}}h",daysAgo:"{{count}}d atrás",inDays:"em {{count}}d"},spoolbuddy:{nav:{dashboard:"Painel",ams:"AMS",inventory:"Inventário",writeTag:"Escrever",settings:"Configurações"},status:{nfcReady:"NFC pronto",nfcOff:"NFC desligado",offline:"Offline",online:"Online",noPrinters:"Sem impressoras",deviceOffline:"Dispositivo offline",waitingConnection:"Aguardando conexão do dispositivo...",systemReady:"Sistema pronto",status:"Status"},dashboard:{readyToScan:"Pronto para escanear",idleMessage:"Coloque um carretel na balança para identificá-lo",nfcHint:"A tag NFC será lida automaticamente",device:"Dispositivo",syncWeight:"Sincronizar peso",weightSynced:"Sincronizado!",unknownTag:"Tag desconhecida",newTag:"Nova tag detectada",onScale:"na balança",linkSpool:"Vincular ao carretel",linkTagTitle:"Vincular tag ao carretel",linkTag:"Vincular tag",selectSpool:"Selecione um carretel para vincular a esta tag:",noUntagged:"Nenhum carretel sem tag encontrado",tagDetected:"Tag detectada",noTag:"Sem tag",tagId:"Tag",grossWeight:"Peso bruto",spoolSize:"Tamanho do carretel",close:"Fechar",currentSpool:"Carretel Atual",plateReady:"Mesa pronta: {{name}}",plateReadyLabel:"Mesas para liberar",plateClearAction:"Liberar",plateClearedToast:"Mesa marcada como limpa",plateClearFailed:"Não foi possível marcar a mesa como limpa"},modal:{spoolDetected:"Carretel Detectado",assignToAms:"Atribuir ao AMS",syncWeight:"Sincronizar Peso",weightSynced:"Sincronizado!",syncing:"Sincronizando...",newTagDetected:"Nova Tag Detectada",addToInventory:"Adicionar ao Inventário",assignToAmsTitle:"Atribuir ao AMS",selectSlot:"Selecionar um slot",assign:"Atribuir",assigning:"Atribuindo...",assignSuccess:"Atribuído!",assignError:"Falha ao atribuir carretel. Tente novamente.",noPrinterSelected:"Selecionar uma impressora...",noAmsDetected:"Nenhum AMS detectado nesta impressora",slot:"Slot"},weight:{noReading:"Sem leitura",stable:"Estável",measuring:"Medindo...",tare:"Tarar",calibrate:"Calibrar"},spool:{remaining:"Restante",material:"Material",brand:"Marca",color:"Cor",coreWeight:"Núcleo",labelWeight:"Rótulo",scaleWeight:"Balança",netWeight:"Líquido",lastUsed:"Último uso"},ams:{noData:"Nenhum AMS detectado",connectAms:"Conecte um AMS para ver os slots",noPrinter:"Nenhuma impressora selecionada",selectPrinter:"Selecione uma impressora na barra superior",printerDisconnected:"Impressora desconectada",humidity:"Umidade",level:"Nível",active:"Ativo",slot:"Slot",empty:"Vazio"},inventory:{search:"Buscar carretéis...",empty:"Nenhum carretel no inventário",noResults:"Nenhum carretel correspondente",spools:"carretéis",addSpool:"Adicionar carretel"},settings:{tabDevice:"Dispositivo",tabDisplay:"Tela",tabScale:"Balança",tabUpdates:"Atualizações",nfcReader:"Leitor NFC",type:"Tipo",connection:"Conexão",notConnected:"N/A",deviceInfo:"Info do dispositivo",hostname:"Host",uptime:"Tempo de atividade",brightness:"Brilho",saved:"Salvo",noBacklight:"Nenhuma retroiluminação DSI detectada. O controle de brilho requer uma tela DSI.",screenBlank:"Tempo para desligar tela",screenBlankDesc:"A tela desliga após inatividade. Toque para despertar.",displayNote:"O brilho é aplicado como filtro de software.",scaleCalibration:"Calibração da balança",currentWeight:"Peso atual",tareOffset:"Tara",calFactor:"Fator",knownWeight:"Peso conhecido",calStep1:"Remova todos os itens da balança e pressione Definir zero.",calStep2:"Coloque o peso conhecido na balança.",setZero:"Definir zero",calibrateNow:"Calibrar",calibrated:"Calibrado",tareSet:"Comando de tara enviado. Aguardando dispositivo...",tareFailed:"Falha ao enviar comando de tara",zeroSet:"Ponto zero definido. Coloque o peso conhecido na balança.",calibrationDone:"Calibração concluída!",calibrationFailed:"Falha na calibração",lastCalibrated:"Última calibração",stable:"Estável",settling:"Estabilizando...",firmware:"Firmware",scale:"Balança",noDevice:"Nenhum dispositivo SpoolBuddy encontrado",daemonVersion:"Versão do daemon",currentVersion:"Atual",versionPending:"Aguardando daemon...",checking:"Verificando...",checkUpdates:"Verificar atualizações",updateAvailable:"Atualização disponível",updateInstructions:"Atualize via SSH: execute o script de instalação do SpoolBuddy.",upToDate:"Atualizado",includeBeta:"Incluir versões beta",systemConfig:"Backend e autenticação",backendUrl:"URL do backend Bambuddy",apiToken:"Token de API",apiTokenPlaceholder:"Insira o token de API",saveConfig:"Salvar configuração",systemQueued:"Configuração enfileirada.",systemFieldsRequired:"URL do backend é obrigatória.",nfcDiagnostic:"Diagnóstico NFC",scaleDiagnostic:"Diagnóstico da balança",readTagDiagnostic:"Diagnóstico de leitura de tag",testNfc:"Testar leitor",testScale:"Testar precisão",testReadTag:"Ler tag"},writeTag:{tabExisting:"Bobina existente",tabNew:"Nova bobina",tabReplace:"Substituir tag",searchPlaceholder:"Buscar por material, cor, marca...",noUntaggedSpools:"Nenhuma bobina sem tag",noTaggedSpools:"Nenhuma bobina com tag",selectSpool:"Selecione uma bobina e coloque um NTAG no leitor",placeTag:"Coloque um NTAG no leitor",tagReady:"Tag detectado — pronto para gravar",writeTag:"Gravar Tag",replaceTag:"Substituir Tag",writing:"Gravando tag...",waiting:"Aguardando SpoolBuddy...",writeSuccess:"Tag gravado com sucesso!",writeFailed:"Falha na gravação",queueFailed:"Falha ao enfileirar comando de gravação",tryAgain:"Tentar novamente",cancel:"Cancelar",replaceWarning:"O tag antigo será desvinculado. O novo tag o substituirá.",deviceOffline:"SpoolBuddy está offline",material:"Material",colorName:"Nome da cor",color:"Cor",brand:"Marca",weight:"Peso (g)",createSpool:"Criar bobina",creating:"Criando...",spoolCreated:"Bobina criada! Pronto para gravar.",createFailed:"Falha ao criar bobina"},quickMenu:{printerPower:"Energia da impressora",systemControls:"Sistema",restartDaemon:"Reiniciar daemon",restartBrowser:"Reiniciar navegador",reboot:"Reiniciar",shutdown:"Desligar",swipeToClose:"Deslize para baixo para fechar",confirmTitle:"Confirmar",confirmShutdown:"Tem certeza de que deseja desligar o SpoolBuddy? Você precisará de acesso físico para ligá-lo novamente.",confirmReboot:"Tem certeza de que deseja reiniciar o SpoolBuddy?",confirmRestartDaemon:"Reiniciar o daemon do SpoolBuddy? NFC e balança ficarão temporariamente indisponíveis.",confirmRestartBrowser:"Reiniciar o navegador kiosk? A tela ficará brevemente preta.",confirm:"Confirmar",confirmPlugOn:"Ligar {{name}}?",confirmPlugOff:"Desligar {{name}}?",turnOn:"Ligar",turnOff:"Desligar"}},bugReport:{title:"Reportar um bug",description:"Descrição",descriptionPlaceholder:"O que deu errado? Por favor, descreva o problema...",email:"Email (opcional)",emailPlaceholder:"seu@email.com.br",emailPrivacy:"Se fornecido, seu email será incluído em uma seção recolhida da issue no GitHub para que o mantenedor possa entrar em contato.",screenshot:"Captura de tela",uploadOrPaste:"Enviar, colar ou arrastar uma imagem",dataCollectedSummary:"Quais dados são incluídos no relatório?",dataIncluded:"Incluídos:",dataIncludedList:"Versão do app, SO, arquitetura, versão Python, estatísticas do banco de dados (apenas contagens), modelos de impressora, quantidade de bicos, versões de firmware, status de conexão, status de integrações (Spoolman, MQTT, HA), configurações não sensíveis, contagem de interfaces de rede, detalhes Docker, versões de dependências.",dataNeverIncluded:"Nunca incluídos:",dataNeverIncludedList:"Nomes de impressoras, números de série, códigos de acesso, senhas, endereços IP, endereços de email, chaves de API, tokens, URLs de webhook, nomes de host ou nomes de usuário.",submit:"Enviar",startLogging:"Iniciar log de depuração",stepEnableLogging:"Log de depuração ativado",stepReproduce:"Reproduza o problema agora",stepStopLogging:"Parar & enviar relatório",stopAndSubmit:"Parar & Enviar",maxDuration:"Para automaticamente após {{minutes}} min",stoppingLogs:"Coletando logs & enviando...",submitting:"Enviando relatório de bug...",submitSuccess:"Relatório de bug enviado com sucesso!",submitFailed:"Falha ao enviar relatório de bug",thankYou:"Obrigado!",submitted:"Seu relatório de bug foi enviado.",viewIssue:"Ver issue",unexpectedError:"Ocorreu um erro inesperado"},failureDetection:{title:"Detecção de Falhas por IA",description:"Monitora impressões via API ML do Obico auto-hospedada e age automaticamente em falhas detectadas.",mlUrl:"URL da API ML do Obico",mlUrlHint:"URL base do seu contêiner Obico ml_api auto-hospedado (ex.: http://192.168.1.10:3333).",test:"Testar",testSuccess:"API ML acessível e operacional.",testFailed:"Não foi possível acessar a API ML.",sensitivity:"Sensibilidade",sensitivityLow:"Baixa (menos falsos positivos)",sensitivityMedium:"Média (equilibrada)",sensitivityHigh:"Alta (detecção precoce, mais falsos positivos)",sensitivityHint:"Ajusta os limiares de confiança que disparam avisos e falhas.",action:"Ação em falha detectada",actionNotify:"Apenas notificar",actionPause:"Pausar impressão",actionPauseOff:"Pausar e cortar energia",pollInterval:"Intervalo de verificação (segundos)",pollIntervalHint:"Frequência de verificação de cada impressora durante a impressão. Mínimo 5s, máximo 120s.",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"Impressoras monitoradas",perPrinterHint:"Escolha quais impressoras o serviço de detecção monitora.",monitorAll:"Monitorar todas as impressoras conectadas",statusTitle:"Status",serviceRunning:"Serviço em execução",thresholds:"Limiares baixo / alto",activePrinters:"Impressões ativas",noActivePrints:"Nenhuma impressão em andamento.",historyTitle:"Detecções recentes",noHistory:"Nenhuma detecção ainda."},makerworld:{title:"MakerWorld",description:"Cole uma URL de modelo do MakerWorld para importar e imprimir diretamente do Bambuddy — sem precisar abrir o app Bambu Handy.",pasteUrlHeader:"Importar do MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… ou cole qualquer link do MakerWorld",resolveButton:"Resolver",signInRequiredTitle:"Login no Bambu Cloud necessário para baixar",signInRequiredBody:"Você pode navegar pelos detalhes do modelo anonimamente, mas o MakerWorld exige uma conta Bambu Cloud para baixar arquivos 3MF.",openCloudSettings:"Abrir configurações do Cloud",untitledModel:"Modelo sem título",byCreator:"por {{name}}",downloadsCount:"{{count}} downloads",licensePrefix:"Licença",alreadyImported:"Já na biblioteca",openOnMakerworld:"Abrir no MakerWorld",alreadyInLibrary:"Este modelo já está na sua biblioteca — encontre-o em Gerenciador de Arquivos → MakerWorld",importSuccess:"{{filename}} importado — salvo em Gerenciador de Arquivos → MakerWorld",platesHeader:"Placas ({{count}})",plateDefaultName:"Placa {{n}}",materialCount:"{{count}} filamentos",amsRequired:"AMS necessário",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"Salvar",sliceIn:"Salvar e fatiar no {{slicer}}",disclaimer:"A integração com o MakerWorld usa endpoints de API documentados pela comunidade. Bambuddy não é afiliado nem endossado pelo MakerWorld ou pela Bambu Lab.",lastImportSuccess:"Importado para sua biblioteca",lastImportAlreadyInLibrary:"Já na sua biblioteca",viewInLibrary:"Ver no Gerenciador de Arquivos",openInBambuStudio:"Abrir no Bambu Studio",openInOrcaSlicer:"Abrir no OrcaSlicer",importTo:"Importar para o Gerenciador de Arquivos",recentImportsHeader:"Importações recentes",phaseResolving:"Resolvendo",phaseDownloading:"Baixando",folderAuto:"MakerWorld (padrão)",importAll:"Importar tudo",importAllProgress:"Importando {{current}}/{{total}}",openGallery:"Abrir galeria de imagens",galleryPrev:"Imagem anterior",galleryNext:"Próxima imagem",deleteImport:"Remover da biblioteca",importDeleting:"Removendo…",importDeleted:"Removido da biblioteca",confirmDelete:"Remover {{filename}} da biblioteca? O arquivo local será excluído, mas a placa pode ser reimportada do MakerWorld.",errors:{resolveFailed:"Não foi possível resolver essa URL do MakerWorld.",downloadFailed:"Falha no download. Tente novamente.",deleteFailed:"Não foi possível remover o arquivo da biblioteca."}},libraryTrash:{title:"Lixeira",headerButton:"Lixeira",headerTooltip:"Ver arquivos movidos para a lixeira",backToFiles:"Voltar ao gerenciador de arquivos",subtitleAdmin:"Arquivos excluídos ficam aqui por {{days}} dias e depois são removidos automaticamente. Esta visualização mostra a lixeira de todos os usuários.",subtitleUser:"Arquivos excluídos ficam aqui por {{days}} dias e depois são removidos automaticamente.",loading:"Carregando a lixeira…",loadError:"Não foi possível carregar a lixeira.",empty:"A lixeira está vazia.",summary:"{{count}} arquivos · {{size}}",emptyTrash:"Esvaziar lixeira",restore:"Restaurar",purgeNow:"Excluir agora",autoPurgeIn:"Exclusão automática em {{when}}",days:"dias",retentionLabel:"Excluir automaticamente após",selectAll:"Selecionar todos",selectOne:"Selecionar {{filename}}",selectionCount:"{{count}} selecionado(s)",bulkRestore:"Restaurar selecionados",bulkPurge:"Excluir selecionados",col:{filename:"Arquivo",folder:"Pasta",size:"Tamanho",deleted:"Movido para a lixeira",autoPurge:"Exclusão auto.",owner:"Proprietário",actions:"Ações"},confirm:{purgeTitle:"Excluir permanentemente?",purgeBody:"{{filename}} será excluído do disco e não poderá ser restaurado.",emptyTitle:"Esvaziar a lixeira?",emptyBody:"Todos os {{count}} arquivos serão excluídos do disco. Esta ação não pode ser desfeita.",bulkPurgeTitle:"Excluir permanentemente os arquivos selecionados?",bulkPurgeBody:"Os {{count}} arquivos selecionados serão excluídos do disco e não poderão ser restaurados.",cta:"Excluir permanentemente"},toast:{restored:"Arquivo restaurado.",restoreFailed:"Não foi possível restaurar o arquivo.",purged:"Arquivo excluído permanentemente.",purgeFailed:"Não foi possível excluir o arquivo.",emptied:"{{count}} arquivo(s) excluído(s) da lixeira.",emptyFailed:"Não foi possível esvaziar a lixeira.",retentionSaved:"Exclusão automática definida para {{days}} dias.",retentionFailed:"Não foi possível salvar a configuração de retenção.",bulkRestored:"{{count}} arquivo(s) restaurado(s).",bulkPurged:"{{count}} arquivo(s) excluído(s)."}},libraryPurge:{title:"Limpar arquivos antigos",headerButton:"Limpar antigos",headerTooltip:"Mover arquivos antigos em massa para a lixeira",description:"Arquivos mais antigos que o limite serão movidos para a lixeira. Pastas externas são ignoradas. Você pode restaurar da lixeira antes da exclusão automática.",ageLabel:"Mover arquivos mais antigos que",days:"dias",includeNeverPrinted:"Incluir arquivos que nunca foram impressos",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"Verificando quantos arquivos correspondem…",previewFailed:"Não foi possível pré-visualizar a limpeza.",previewSummary:"{{count}} arquivos · {{size}} seriam movidos para a lixeira",andMore:"…e mais {{count}}",warning:"Os arquivos são excluídos de forma suave — você pode restaurá-los da lixeira até o fim do período de retenção.",confirmCta:"Mover {{count}} para a lixeira",purging:"Movendo para a lixeira…",toast:{success:"{{count}} arquivo(s) movido(s) para a lixeira.",failed:"Não foi possível limpar os arquivos."}},libraryAutoPurge:{enableLabel:"Limpar arquivos antigos automaticamente",enableDescription:"Executa a limpeza administrativa uma vez por dia. Os arquivos vão primeiro para a lixeira — não são excluídos imediatamente.",ageLabel:"Limpar automaticamente arquivos mais antigos que",ageDescription:"Mínimo 7 dias, máximo 10 anos. Usa a mesma regra de idade do botão Limpar manual.",days:"dias",includeNeverPrinted:"Incluir arquivos que nunca foram impressos",saveFailed:"Não foi possível salvar as configurações de limpeza automática."},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},Nme={nav:{printers:"打印机",archives:"归档",queue:"队列",stats:"统计",profiles:"配置文件",maintenance:"维护",projects:"项目",inventory:"耗材",files:"文件管理器",makerworld:"MakerWorld",notifications:"通知",settings:"设置",system:"系统",collapseSidebar:"收起侧边栏",expandSidebar:"展开侧边栏",update:"更新",updateAvailable:"有可用更新：v{{version}}",updateAvailableBanner:"版本 {{version}} 已发布！",viewUpdate:"查看更新",viewOnGithub:"在 GitHub 上查看",keyboardShortcuts:"键盘快捷键 (?)",switchToLight:"切换到浅色模式",switchToDark:"切换到深色模式",smartSwitches:"智能开关",logout:"退出登录"},common:{save:"保存",saving:"保存中...",cancel:"取消",delete:"删除",edit:"编辑",add:"添加",close:"关闭",confirm:"确认",loading:"加载中...",error:"错误",success:"成功",warning:"警告",enabled:"已启用",disabled:"已禁用",yes:"是",no:"否",on:"开",off:"关",all:"全部",none:"无",search:"搜索",filter:"筛选",sort:"排序",refresh:"刷新",download:"下载",upload:"上传",uploading:"上传中...",uploadFailed:"上传失败",actions:"操作",status:"状态",name:"名称",description:"描述",date:"日期",time:"时间",hours:"小时",minutes:"分钟",seconds:"秒",days:"天",enable:"启用",disable:"禁用",permissions:"权限",noPrinters:"未配置打印机",noData:"暂无数据",linkNotFound:"未找到链接",required:"必填",optional:"可选",dismiss:"关闭",apply:"应用",reset:"重置",export:"导出",import:"导入",clear:"清除",selectAll:"全选",deselectAll:"取消全选",noChange:"— 不更改 —",unchanged:"未更改",unassigned:"未分配",unknown:"未知",unknownError:"未知错误",today:"今天",tomorrow:"明天",asap:"尽快",overdue:"已逾期",now:"现在",collapse:"收起",expand:"展开",viewArchive:"查看归档",viewInFileManager:"在文件管理器中查看",addedBy:"由 {{username}} 添加",prints:"次打印",more:"还有 {{count}} 个",ascending:"升序",descending:"降序",back:"返回",copy:"复制",copied:"已复制!",printer:"打印机",remove:"移除",type:"类型",print:"打印",rename:"重命名",move:"移动",create:"创建",duplicate:"复制",left:"左",right:"右"},printers:{title:"打印机",addPrinter:"添加打印机",editPrinter:"编辑打印机",deletePrinter:"删除打印机",printerName:"打印机名称",serialNumber:"序列号",ipAddress:"IP 地址 / 主机名",accessCode:"访问码",model:"型号",nozzleCount:"喷嘴数量",autoArchive:"自动归档",status:{available:"可用",idle:"空闲",printing:"打印中",paused:"已暂停",offline:"离线",problem:"故障",error:"错误",finished:"已完成",unknown:"未知"},temperatures:{nozzle:"喷嘴",bed:"热床",chamber:"腔室"},progress:"{{percent}}% 完成",timeRemaining:"剩余 {{time}}",deleteConfirm:'确定要删除"{{name}}"吗？',maintenanceOk:"维护正常",maintenanceWarning:"{{count}} 个警告",maintenanceWarning_plural:"{{count}} 个警告",maintenanceDue:"{{count}} 个到期",maintenanceDue_plural:"{{count}} 个到期",sort:{name:"名称",status:"状态",model:"型号",location:"位置",ascending:"升序排列",descending:"降序排列"},cardSize:{small:"小卡片",medium:"中卡片",large:"大卡片",extraLarge:"超大卡片"},hideOffline:"隐藏离线",nextAvailable:"下一个可用",powerOn:"开机",offlinePrintersWithPlugs:"带智能插座的离线打印机",noPrintersConfigured:"尚未配置打印机",search:"搜索打印机...",noSearchResults:"没有打印机符合您的搜索或筛选条件",filter:{allStatuses:"所有状态",allLocations:"所有位置"},readyToPrint:"准备打印",external:"外部",extL:"外置左",extR:"外置右",deleteArchives:"删除打印归档",noLabel:"无标签",printPreview:"打印预览",width:"宽度",height:"高度",noObjectsFound:"未找到对象",objectsLoadedOnPrintStart:"对象在打印开始时加载",willBeSkipped:"将被跳过",name:"名称",serialCannotBeChanged:"序列号无法更改",locationHelp:"用于分组打印机和筛选队列任务",wifiSignal:{veryWeak:"非常弱",weak:"弱",fair:"一般",good:"良好",excellent:"优秀"},maintenanceUpToDate:"所有维护均已完成 - 点击查看",chamberLightOn:"打开腔室灯",chamberLightOff:"关闭腔室灯",files:"文件",browseFiles:"浏览打印机文件",autoOffAfterPrint:"打印后自动关机",autoOffExecuted:"已执行自动关机 - 开启打印机以重置",hmsErrors:"HMS 错误",viewHmsErrors:"查看 {{count}} 个 HMS 错误",resume:"继续",pause:"暂停",stop:"停止",camera:"摄像头",skipObject:"跳过对象",reconnect:"重新连接",forceRefresh:"强制刷新",forceRefreshSuccess:"已请求刷新",mqttDebug:"MQTT 调试",printerInformation:"打印机信息",copyToClipboard:"复制",copied:"已复制！",state:"状态",wifiSignalLabel:"WiFi 信号",developerMode:"开发者模式",enabled:"已启用",disabled:"已禁用",addedOn:"添加日期",sdCard:"SD 卡",inserted:"已插入",notInserted:"未插入",totalPrintHours:"打印时长",activeNozzle:"当前：{{nozzle}} 喷嘴",nozzleRack:"喷嘴架",nozzleDocked:"已停靠",nozzleMounted:"已安装",nozzleActive:"使用中",nozzleIdle:"空闲",nozzleDiameter:"直径",nozzleType:"类型",nozzleStatus:"状态",nozzleFilament:"耗材",nozzleWear:"磨损",nozzleMaxTemp:"最高温度",nozzleSerial:"序列号",nozzleHardenedSteel:"硬化钢",nozzleStainlessSteel:"不锈钢",nozzleTungstenCarbide:"碳化钨",nozzleFlow:"流量",nozzleHighFlow:"高流量",nozzleStandardFlow:"标准",firmwareUpdate:"固件更新",firmwareInstructions:"在打印机触摸屏上，前往",firmwareNav:"导航到",settings:"设置",firmware:"固件",discoverPrinters:"发现打印机",searching:"搜索中...",manualEntry:"手动输入",addFromCloud:"从云端添加",toast:{printerDeleted:"打印机已删除",missingSpoolAssignment:"已在{{printer}}上开始打印。以下料槽未分配耗材: {{slots}}",printerAdded:"打印机已添加",printerUpdated:"打印机已更新",failedToDelete:"删除打印机失败",failedToAdd:"添加打印机失败",failedToUpdate:"更新打印机失败",commandSent:"命令已发送",failedToSendCommand:"发送命令失败",turnedOn:"{{name}} 已开启",failedToPowerOn:"开启 {{name}} 失败",scriptTriggered:"脚本已触发",printStopped:"打印已停止",printPaused:"打印已暂停",printResumed:"打印已继续",referenceDeleted:"参考已删除",detectionAreaSaved:"检测区域已保存",failedToRunScript:"运行脚本失败",failedToStopPrint:"停止打印失败",failedToPausePrint:"暂停打印失败",failedToResumePrint:"继续打印失败",failedToControlChamberLight:"控制腔室灯失败",failedToSetSpeed:"设置打印速度失败",failedToUpdateSetting:"更新设置失败",failedToSkipObjects:"跳过对象失败",failedToRereadRfid:"重新读取 RFID 失败",failedToCheckPlate:"检查打印板失败",failedToUpdateLabel:"更新标签失败",failedToDeleteReference:"删除参考失败",failedToSaveDetectionArea:"保存检测区域失败",plateCheckEnabled:"打印板检查已启用",plateCheckDisabled:"打印板检查已禁用",calibrationSaved:"校准已保存！",calibrationFailed:"校准失败",rfidRereadInitiated:"已发起 RFID 重新读取"},connection:{connected:"已连接",offline:"离线"},plateStatus:{markCleared:"将打印板标记为已清理",cleared:"打印板已清理",notCleared:"打印板未清理",inUse:"打印板使用中"},queue:{inQueue:"队列中有 {{count}} 个打印任务",inQueue_plural:"队列中有 {{count}} 个打印任务"},controls:"控制",rfid:{reread:"重新读取 RFID"},bedJog:{title:"移动热床",bed:"热床",step:"步长 (mm)",up:"热床上移",down:"热床下移",disabledWhilePrinting:"打印中已禁用",notHomedTitle:"打印机未归零",notHomedMessage:"打印机自上次打印以来尚未归零。请先执行自动归零以确保安全定位（先停放喷头，然后归零 X、Y 和 Z），或者直接移动 — 软限位将被绕过。",homeZ:"自动归零",moveAnyway:"强制移动",homingStarted:"打印机自动归零中…"},permission:{noAdd:"您没有添加打印机的权限",noEdit:"您没有编辑打印机的权限",noDelete:"您没有删除打印机的权限",noControl:"您没有控制打印机的权限",noFiles:"您没有访问打印机文件的权限",noAmsRfid:"您没有重新读取 AMS RFID 的权限",noSmartPlugControl:"您没有控制智能插座的权限",noCamera:"您没有查看摄像头的权限"},modal:{addTitle:"添加打印机",editTitle:"编辑打印机",myPrinter:"我的打印机",selectModel:"选择型号...",locationGroup:"位置 / 分组（可选）",locationPlaceholder:"例如：工作室、办公室、地下室",autoArchiveLabel:"自动归档已完成的打印",fromPrinterSettings:"来自打印机设置",modelOptional:"型号（可选）",saveChanges:"保存更改"},skipObjects:{tooltip:"跳过对象",onlyWhilePrinting:"跳过对象（仅在打印时）",requiresMultiple:"跳过对象（需要2个以上对象）",title:"跳过对象",matchIdsInfo:"将 ID 与打印机显示屏上的 ID 进行对照",printerShowsIds:"打印机屏幕上显示构建板上对象的 ID",skipSelected:"跳过所选",skipping:"跳过中...",noObjectsSelected:"未选择对象",selectObjectsToSkip:"选择要从当前打印中跳过的对象",skipped:"已跳过",objectsSkipped:"对象已跳过",activeCount:"{{count}} 个活跃",waitForLayer:"等待第2层以上才能跳过对象（当前第 {{layer}} 层）",skip:"跳过",confirmTitle:"跳过对象？",confirmMessage:'确定要跳过"{{name}}"吗？此操作无法撤销。'},confirm:{deleteTitle:"删除打印机",deleteMessage:'确定要删除"{{name}}"吗？这将移除所有连接设置。',deleteArchivesNote:"此打印机的所有打印历史将被永久删除。",keepArchivesNote:"打印历史将保留，但不再与此打印机关联。",stopTitle:"停止打印",stopMessage:'确定要停止"{{name}}"上的当前打印吗？这将取消打印任务。',stopButton:"停止打印",pauseTitle:"暂停打印",pauseMessage:'确定要暂停"{{name}}"上的当前打印吗？',pauseButton:"暂停打印",resumeTitle:"继续打印",resumeMessage:'确定要继续"{{name}}"上的打印吗？',resumeButton:"继续打印",powerOnTitle:"开启打印机",powerOnMessage:'确定要打开"{{name}}"的电源吗？',powerOnButton:"开机",powerOffTitle:"关闭打印机",powerOffMessage:'确定要关闭"{{name}}"的电源吗？',powerOffWarning:'警告："{{name}}"正在打印中！确定要关闭电源吗？这将中断打印并可能损坏打印机。',powerOffButton:"关机"},bulk:{select:"选择",selectAll:"全选",selectByLocation:"按位置选择",selected:"已选择{{count}}台",actions:{stop:"停止",pause:"暂停",resume:"继续",clearPlate:"清除打印床",clearHMS:"清除通知"},confirm:{stopTitle:"停止{{count}}个打印任务",stopMessage:"这将取消{{count}}台打印机上的活动打印任务。此操作无法撤销。",stopButton:"全部停止",pauseTitle:"暂停{{count}}个打印任务",pauseMessage:"这将暂停{{count}}台打印机上的活动打印任务。",pauseButton:"全部暂停",clearPlateTitle:"清除{{count}}个打印床",clearPlateMessage:"这将清除{{count}}台打印机的打印床，可能会触发队列中的任务。",clearPlateButton:"全部清除"},success:"{{action}}已在{{count}}台打印机上完成",partial:"{{succeeded}}成功，{{failed}}失败",noneApplicable:"没有选中的打印机处于适合此操作的状态",selectByState:"按状态选择"},discovery:{title:"发现打印机",searching:"搜索中...",scanning:"扫描中...",scanProgress:"扫描中... {{scanned}}/{{total}}",foundPrinters:"发现 {{count}} 台打印机",noPrintersFound:"未找到打印机",noPrintersFoundSubnet:"在指定子网中未找到打印机。",noPrintersFoundNetwork:"在网络上未找到打印机。",allConfigured:"所有发现的打印机已配置完毕。",alreadyAdded:"已添加",select:"选择",manualEntry:"手动输入",addFromCloud:"从云端添加",subnetToScan:"要扫描的子网",dockerNote:"检测到 Docker 环境。请以 CIDR 格式输入打印机所在子网。需要在 docker-compose.yml 中设置 network_mode: host。",scanSubnet:"扫描子网查找打印机",discoverNetwork:"在网络上发现打印机",scanningSubnet:"正在扫描子网查找拓竹打印机...",scanningNetwork:"正在扫描网络...",serialRequired:"需要序列号",unknown:"未知",failedToStart:"启动发现失败"},drying:{start:"开始干燥",stop:"停止干燥",temperature:"温度",duration:"时长",hours:"小时",timeRemaining:"剩余 {{time}}",active:"干燥中",notSupported:"不支持干燥",powerRequired:"连接AMS电源适配器以启用干燥",startingDrying:"正在启动干燥...",stoppingDrying:"正在停止干燥...",rotateTray:"干燥时旋转料盘"},filaments:"耗材",openCameraOverlay:"打开摄像头叠加层",openCameraWindow:"在新窗口中打开摄像头",firmwareUpdateAvailable:"固件更新可用：{{current}} → {{latest}}",firmwareUpToDate:"固件 {{version}} — 已是最新",firmwareUpdateButton:"更新",plateDetection:{noPermission:"您没有更新打印机的权限",enabledClick:"打印板检查已启用 - 点击禁用",disabledClick:"打印板检查已禁用 - 点击启用",manageCalibration:"管理打印板检测校准",calibrationRequired:"需要校准",calibrationInstructions:"请确保构建板<strong>完全空置</strong>，然后点击校准。",calibrationDescription:"校准会拍摄空置打印板的参考图像。后续检查将与此参考进行比较以检测物体。",calibrationTip:"<strong>提示：</strong>您最多可以为不同的打印板存储5个校准。系统会在检查时自动使用最佳匹配。",plateEmpty:"打印板似乎是空的",objectsDetected:"在打印板上检测到物体",confidence:"置信度",difference:"差异",analysisPreview:"分析预览：",analysisLegend:"绿色框 = 检测区域，红色覆盖 = 与校准的差异",savedReferences:"已保存的参考 ({{count}}/{{max}})",deleteReference:"删除参考",labelPlaceholder:"标签...",clickToEdit:"{{label}} - 点击编辑",clickToAddLabel:"点击添加标签"},speed:{title:"打印速度",silent:"静音 (50%)",standard:"标准 (100%)",sport:"运动 (124%)",ludicrous:"疯狂 (166%)"},airduct:{title:"风道模式",cooling:"制冷",heating:"加热"},noSdCard:"无SD",door:{open:"开",closed:"关"},fans:{partCooling:"零件冷却风扇",auxiliary:"辅助风扇",chamber:"腔室风扇"},clickToViewHmsErrors:"点击查看 HMS 错误",estimatedCompletion:"预计完成时间",plateNumber:"板 {{number}}",slotOptions:"槽位选项",amsPopup:{friendlyName:"AMS 名称",friendlyNamePlaceholder:"例如 AMS 友好名称",serialNumber:"序列号",firmwareVersion:"固件",save:"保存",clear:"清除",noEditPermission:"您没有重命名 AMS 单元的权限"},firmwareModal:{title:"固件更新",titleUpToDate:"固件信息",currentVersion:"当前版本：",latestVersion:"最新版本：",releaseNotes:"发布说明",checkingPrereqs:"正在检查前提条件...",sdCardReady:"SD 卡已就绪。点击下方上传固件。",uploadedSuccess:"固件已上传到 SD 卡！",applyInstructions:"在打印机上应用更新：",step1:"在打印机触摸屏上，前往<strong>设置</strong>",step2:"导航到<strong>固件</strong>",step3:"选择<strong>从 SD 卡更新</strong>",step4:"更新将需要 10-20 分钟",done:"完成",starting:"启动中...",uploadFirmware:"上传固件",uploadFailed:"上传启动失败：{{error}}",uploadedToast:"固件已上传！请在打印机屏幕上触发更新。",availableVersions:"可用版本",usable:"可用",unavailable:"不可用",installed:"已安装",newerBadge:"较新",olderBadge:"较旧",currentBadge:"当前"},accessCodePlaceholder:"留空以保持当前值",roi:{title:"检测区域 (ROI)",xStart:"X 起点",yStart:"Y 起点",width:"宽度",height:"高度",instruction:"调整检测区域以聚焦到构建板。预览中的绿色框显示当前区域。"},developerModeWarning:"以下打印机未启用开发者局域网模式：{{names}}。某些功能可能无法使用。",howToEnable:"如何启用",incompatibleFile:"此文件是为 {{slicedFor}} 切片的，但该打印机是 {{printerModel}}",dropNotPrintable:"只能打印 .gcode 和 .gcode.3mf 文件",dropToPrint:"拖放以打印",cannotPrint:"打印机忙碌"},archives:{title:"打印归档",searchPlaceholder:"搜索归档...",filterByPrinter:"按打印机筛选",filterByStatus:"按状态筛选",sortBy:"排序方式",sortNewest:"最新优先",sortOldest:"最旧优先",sortName:"名称",sortDuration:"时长",sortLargest:"最大优先",sortSmallest:"最小优先",sortSize:"大小",noArchives:"未找到归档",noArchivesSearch:"没有匹配搜索的归档",originalPrintNotVisible:"原始打印不可见 - 请尝试清除筛选条件",noArchivesYet:"暂无归档",prints:"条打印",pagination:{showing:"显示",to:"至",of:"共",show:"每页",page:"页",all:"全部"},loadingArchives:"加载归档中...",releaseToUpload:"释放以上传",showAll:"显示全部",showFavoritesOnly:"仅显示收藏",gridView:"网格视图",listView:"列表视图",calendarView:"日历视图",logView:"打印日志",manageTags:"管理标签",showFailedPrints:"显示失败的打印",hideFailedPrints:"隐藏失败的打印",hideDuplicates:"隐藏重复项",viewOriginalPrint:"点击查看原始打印 (#{{id}})",printTime:"打印时间",filamentUsed:"耗材用量",cost:"成本",reprint:"重新打印",preview:"预览",deleteArchive:"删除归档",deleteConfirm:"确定要删除此归档吗？",favorite:"收藏",unfavorite:"取消收藏",viewDetails:"查看详情",status:{completed:"已完成",failed:"失败",stopped:"已停止"},toast:{source3mfAttached:"源 3MF 已附加：{{filename}}",failedUploadSource3mf:"上传源 3MF 失败",source3mfRemoved:"源 3MF 已移除",failedRemoveSource3mf:"移除源 3MF 失败",f3dAttached:"F3D 已附加：{{filename}}",failedUploadF3d:"上传 F3D 失败",f3dRemoved:"F3D 已移除",failedRemoveF3d:"移除 F3D 失败",timelapseAttached:"延时摄影已附加：{{filename}}",timelapseAlreadyAttached:"延时摄影已附加",noMatchingTimelapse:"未找到匹配的延时摄影",failedScanTimelapse:"扫描延时摄影失败",failedAttachTimelapse:"附加延时摄影失败",timelapseRemoved:"延时摄影已移除",failedRemoveTimelapse:"移除延时摄影失败",timelapseUploaded:"延时摄影已上传：{{filename}}",failedUploadTimelapse:"上传延时摄影失败",archiveDeleted:"归档已删除",failedDeleteArchive:"删除归档失败",addedToFavorites:"已添加到收藏",removedFromFavorites:"已从收藏中移除",projectUpdated:"项目已更新",failedUpdateProject:"更新项目失败",linkCopied:"链接已复制到剪贴板",failedCopyLink:"复制链接失败",photoDeleted:"照片已删除",failedDeletePhoto:"删除照片失败",failedDeleteArchives:"删除归档失败",failedUpdateFavorites:"更新收藏失败",exportDownloaded:"导出已下载",exportFailed:"导出失败"},menu:{print:"打印",schedule:"排程",openInBambuStudio:"在切片软件中打开",slice:"切片",externalLink:"外部链接",viewOnMakerWorld:"在 MakerWorld 上查看",preview3d:"3D 预览",viewTimelapse:"查看延时摄影",scanForTimelapse:"扫描延时摄影",uploadTimelapse:"上传延时摄影",removeTimelapse:"移除延时摄影",downloadSource3mf:"下载源 3MF",uploadSource3mf:"上传源 3MF",replaceSource3mf:"替换源 3MF",removeSource3mf:"移除源 3MF",uploadF3d:"上传 F3D",replaceF3d:"替换 F3D",downloadF3d:"下载 F3D",removeF3d:"移除 F3D",download:"下载",copyDownloadLink:"复制下载链接",qrCode:"二维码",viewPhotos:"查看照片",viewPhotosCount:"查看照片 ({{count}})",projectPage:"项目页面",addToFavorites:"添加到收藏",removeFromFavorites:"从收藏中移除",edit:"编辑",goToProject:"前往项目：{{name}}",addToProject:"添加到项目",removeFromProject:"从项目中移除",loading:"加载中...",noProjectsAvailable:"无可用项目",searchProjects:"Search projects…",select:"选择",deselect:"取消选择",delete:"删除"},permission:{noReprint:"您没有重新打印此归档的权限",noAddToQueue:"您没有添加到队列的权限",noUpdateArchives:"您没有更新归档的权限",noUploadFiles:"您没有上传文件的权限",noDownload:"您没有下载归档的权限",noCopyLink:"您没有复制下载链接的权限",noDelete:"您没有删除此归档的权限",noCreate:"您没有创建归档的权限"},platePicker:{title:"选择要预览的打印板",hint:"此存档包含多个打印板。选择一个在 GCode 查看器中打开。",plateLabel:"打印板 {{index}}",objectCount:"{{count}} 个对象",objectCount_plural:"{{count}} 个对象",noGcode:"此存档没有可预览的已切片 G 代码。请先在 Bambu Studio 中打开并切片。"},card:{previousPlate:"上一个板",nextPlate:"下一个板",plateNumber:"板 {{index}}",moreOptions:"右键查看更多选项",addToFavorites:"添加到收藏",removeFromFavorites:"从收藏中移除",cancelled:"已取消",failed:"失败",duplicate:"重复",duplicateTitle:"此模型之前已打印过",openSource3mf:"在 Bambu Studio 中打开源 3MF（右键查看更多选项）",downloadF3d:"下载 Fusion 360 设计文件",viewTimelapse:"查看延时摄影",viewPhoto:"查看 1 张照片",viewPhotos:"查看 {{count}} 张照片",openFolder:"打开文件夹：{{name}}",slicedFile:"已切片文件 - 可以打印",sourceFile:"仅源文件 - 无 AMS 映射可用",gcode:"GCODE",source:"源文件",project:"项目：{{name}}",estimated:"预计：{{time}}",actual:"实际：{{time}}",accuracy:"准确度：{{percent}}%",filament:"{{weight}}g",layer:"{{count}} 层",layers:"{{count}} 层",object:"{{count}} 个对象",objects:"{{count}} 个对象",slicedFor:"为 {{model}} 切片",uploadedBy:"上传者",noPermissionReprint:"您没有重新打印的权限",noFileForReprint:"无可用的 3MF 文件 — 打印记录时无法从打印机下载该文件",noPermissionEdit:"您没有编辑归档的权限",noPermissionDelete:"您没有删除归档的权限",reprint:"重新打印",schedulePrint:"排程打印",schedule:"排程",openInBambuStudio:"在切片软件中打开",openInBambuStudioToSlice:"在切片软件中打开进行切片",slice:"切片",externalLink:"外部链接",makerWorld:"MakerWorld：{{designer}}",viewProject:"查看项目",noExternalLink:"无外部链接",preview3d:"3D 预览",download:"下载",edit:"编辑",delete:"删除"},modal:{deleteArchive:"删除归档",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',deleteButton:"删除",removeSource3mf:"移除源 3MF",removeSource3mfConfirm:'确定要从"{{name}}"中移除源 3MF 文件吗？这将删除原始切片项目文件。',removeButton:"移除",removeF3d:"移除 F3D",removeF3dConfirm:'确定要从"{{name}}"中移除 Fusion 360 设计文件吗？',removeTimelapse:"移除延时摄影",removeTimelapseConfirm:'确定要从"{{name}}"中移除延时摄影视频吗？',timelapse:"{{name}} - 延时摄影",selectTimelapse:"选择延时摄影",selectTimelapseDesc:"未找到自动匹配。请选择此打印的延时摄影：",deleteArchives:"删除归档",deleteArchivesConfirm:"确定要删除 {{count}} 个归档吗？此操作无法撤销。",deleteCount:"删除 {{count}} 个"},page:{title:"归档",printsCount:"{{filtered}} / {{total}} 次打印",dropFilesHere:"将 .3mf 文件拖放到此处",releaseToUpload:"释放以上传",only3mfSupported:"仅支持 .3mf 文件",close:"关闭",selected:"已选择 {{count}} 个",selectAll:"全选",tags:"标签",project:"项目",favorite:"收藏",delete:"删除",toggledFavorites:"已切换 {{count}} 个归档的收藏状态",failedUpdateFavorites:"更新收藏失败",archivesDeleted:"已删除 {{count}} 个归档",failedDeleteArchives:"删除归档失败",photoDeleted:"照片已删除",failedDeletePhoto:"删除照片失败"},list:{name:"名称",printer:"打印机",date:"日期",size:"大小",actions:"操作",hasTimelapse:"有延时摄影"},log:{date:"日期",printName:"打印名称",printer:"打印机",user:"用户",status:"状态",duration:"时长",filament:"耗材",allPrinters:"所有打印机",allUsers:"所有用户",allStatuses:"所有状态",cancelled:"已取消",skipped:"已跳过",dateFrom:"从",dateTo:"到",noEntries:"未找到打印日志条目",showing:"显示 {{count}} / {{total}} 条",rowsPerPage:"行数",page:"页",prev:"上一页",next:"下一页",clearLog:"清除日志",clearLogTitle:"清除打印日志",clearLogConfirm:"所有打印日志条目将被永久删除。归档和队列项目不受影响。此操作无法撤销。确定要继续吗？",clearLogButton:"全部清除",cleared:"已清除 {{count}} 条日志",clearFailed:"清除打印日志失败"}},queue:{title:"打印队列",subtitle:"排程和管理您的打印任务",addToQueue:"添加到队列",print:"打印",reprint:"重新打印",schedulePrint:"排程打印",editQueueItem:"编辑队列项目",printToPrinters:"打印到 {{count}} 台打印机",queueToPrinters:"排队到 {{count}} 台打印机",queueSelectedPlates:"将 {{count}} 个热床加入队列",selectAllPlates:"选择全部 {{count}} 个热床",deselectAll:"取消全选",printQueued:"已加入打印队列",itemsQueued:"{{count}} 个任务已加入队列",sending:"发送中...",sendingProgress:"发送中 {{current}}/{{total}}...",adding:"添加中...",addingProgress:"添加中 {{current}}/{{total}}...",savingProgress:"保存中 {{current}}/{{total}}...",clearQueue:"清空队列",clearHistory:"清除历史",emptyQueue:"队列为空",position:"位置",scheduledTime:"排程时间",moveUp:"上移",moveDown:"下移",startNow:"立即开始",printingInProgress:"打印进行中...",viewArchive:"查看归档",viewInFileManager:"在文件管理器中查看",itemCount:"{{count}} 个项目",itemCount_plural:"{{count}} 个项目",dragToReorder:"拖动以重新排序（仅限尽快）",reorderHint:'位置仅影响"尽快"项目。排程项目按设定时间运行。',sjf:{label:"SJF",tooltip:"最短任务优先 — 调度器优先处理较短的打印任务"},addedBy:"由 {{name}} 添加",nextInQueue:"队列中的下一个",clearPlateSuccess:"打印板已清理 — 准备进行下一个打印",plateNumber:"板 {{index}}",quantity:"数量",quantityHint:"创建 {{count}} 个队列项目",activeBatches:"活跃批次",batchProgress:"已完成 {{completed}}/{{total}}",cancelBatch:"取消剩余",batchCancelled:"已取消剩余批次项目",cancelBatchConfirmTitle:"取消批次",cancelBatchConfirmMessage:"取消此批次中所有剩余的待处理项目？",batch:"批次",sections:{currentlyPrinting:"正在打印",queued:"排队中",history:"历史"},status:{pending:"等待中",waiting:"等待中",printing:"打印中",paused:"已暂停",completed:"已完成",failed:"失败",skipped:"已跳过",cancelled:"已取消"},summary:{printing:"打印中",queued:"排队中",totalTime:"总队列时间",totalWeight:"总队列重量",history:"历史"},filter:{allPrinters:"所有打印机",unassigned:"未分配",allStatus:"所有状态",allLocations:"所有位置",any:"任意"},sort:{byPosition:"按位置排序",byName:"按名称排序",byPrinter:"按打印机排序",bySchedule:"按排程排序",byDate:"按日期排序",ascendingOldest:"升序（最旧优先）",descendingNewest:"降序（最新优先）"},badges:{staged:"已暂存",requiresPrevious:"需要前一个成功",autoPowerOff:"自动关机",gcodeInjection:"G-code"},empty:{title:"没有排程的打印",description:'从归档页面使用右键菜单中的"排程"选项来排程打印，或拖放文件开始。'},time:{asap:"尽快",overdue:"已逾期",now:"现在",lessThanMinute:"不到一分钟",inMinutes:"{{count}} 分钟后",inHours:"{{count}} 小时后"},actions:{stopPrint:"停止打印",startPrint:"开始打印",requeue:"重新排队"},bulkEdit:{title:"编辑 {{count}} 个项目",title_plural:"编辑 {{count}} 个项目",description:"仅更改的设置将应用于所选项目。",printer:"打印机",noChange:"— 不更改 —",queueOptions:"队列选项",staged:"暂存（手动开始）",autoPowerOff:"打印后自动关机",requirePrevious:"要求前一个成功",printOptions:"打印选项",bedLevelling:"热床调平",flowCalibration:"流量校准",vibrationCalibration:"振动校准",layerInspection:"首层检查",timelapse:"延时摄影",useAms:"使用 AMS",applyChanges:"应用更改",selectAll:"全选",deselectAll:"取消全选",selected:"已选择 {{count}} 个",editSelected:"编辑所选",cancelSelected:"取消所选"},confirm:{cancelTitle:"取消排程打印",cancelMessage:'确定要取消"{{name}}"吗？',stopTitle:"停止打印",stopMessage:'确定要停止当前打印"{{name}}"吗？这将取消打印机上的打印任务。',removeTitle:"从历史中移除",removeMessage:'确定要从队列历史中移除"{{name}}"吗？',clearHistoryTitle:"清除历史",clearHistoryMessage:"确定要从历史中移除所有 {{count}} 个项目吗？",cancelButton:"取消打印",stopButton:"停止打印",thisPrint:"此打印",thisItem:"此项目"},toast:{cancelled:"队列项目已取消",cancelFailed:"取消项目失败",removed:"队列项目已移除",removeFailed:"移除项目失败",stopped:"打印已停止",stopFailed:"停止打印失败",released:"打印已释放到队列",startFailed:"开始打印失败",reorderFailed:"重新排序队列失败",historyCleared:"已清除 {{count}} 条历史记录",clearHistoryFailed:"清除历史失败",updateFailed:"更新项目失败",bulkCancelled:"已取消 {{count}} 个项目",bulkCancelFailed:"批量取消项目失败"},timeline:{listView:"列表",timelineView:"时间线",unassigned:"未分配",noData:"当天没有计划的打印任务",allDoneBy:"所有打印预计在 {{time}} 前完成",staged:"暂存",filterAll:"全部显示",filterPrinting:"打印中",filterQueued:"排队中",time:{anyMoment:"即将完成",minutesLeft:"剩余{{minutes}}分钟",hoursLeft:"剩余{{hours}}小时",hoursMinutesLeft:"剩余{{hours}}小时{{minutes}}分钟"},day:{previous:"前一天",next:"后一天",today:"今天"}},permissions:{noStopPrint:"您没有停止打印的权限",noStartPrint:"您没有开始打印的权限",noEdit:"您没有编辑此队列项目的权限",noCancel:"您没有取消此队列项目的权限",noRequeue:"您没有重新排队的权限",noRemove:"您没有移除此队列项目的权限",noClearHistory:"您没有清除所有历史的权限",noEditItems:"您没有编辑队列项目的权限",noCancelItems:"您没有取消队列项目的权限"}},backgroundDispatch:{unknownFile:"未知文件",unknownPrinter:"未知打印机",startingPrints:"正在开始打印",progressSummary:"{{complete}}/{{total}} 完成 • 已分发：{{dispatched}} • 处理中：{{processing}}",expandDetails:"展开分发详情",collapseDetails:"收起分发详情",dismissToast:"关闭分发通知",cancelDispatchJob:"取消分发任务",cancel:"取消",cancelling:"取消中…",awaitingPrinter:"等待打印机…",status:{dispatched:"已分发",processing:"处理中",completed:"已完成",failed:"失败",cancelled:"已取消"},toast:{cancellingUpload:"取消上传中...",cancelled:"分发已取消",cancelFailed:"取消分发失败",completeWithFailures:"后台分发完成：{{completed}} 成功，{{failed}} 失败",completeSuccess:"后台分发完成：{{completed}} 成功",printStartedRemaining:"{{completed}} 个打印已开始，{{remaining}} 个正在发送..."}},stats:{title:"仪表板",subtitle:"拖动小部件以重新排列。点击眼睛图标隐藏。",overview:"概览",totalPrints:"总打印次数",successRate:"成功率",totalPrintTime:"总打印时间",printTime:"打印时间",totalFilament:"总耗材用量",filamentUsed:"耗材用量",filamentCost:"耗材成本",totalCost:"总成本",energyUsed:"能耗",energyCost:"能源成本",energyWarmingUpTooltip:"能耗追踪正在收集每小时快照。当所选范围之前至少存在一个快照时，时间段合计将变得准确。早期数值可能偏低。",averagePrintTime:"平均打印时间",printsPerDay:"每日打印次数",byPrinter:"按打印机",printsByPrinter:"各打印机打印次数",byMaterial:"按材料",byMonth:"按月份",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",allTime:"全部时间",quickStats:"快速统计",printActivity:"打印活动",filamentTypes:"耗材类型",filamentTrends:"耗材趋势",failureAnalysis:"失败分析",timeAccuracy:"时间准确度",successful:"成功：",failed:"失败：",perfectEstimate:"100% = 完美估计",noTimeAccuracyData:"暂无时间准确度数据",noFilamentData:"暂无耗材数据",noPrinterData:"暂无打印机数据",noPrintData:"暂无打印数据",noPrintDataLast30Days:"最近 30 天无打印数据",failureReasons:"失败原因",topFailureReasons:"主要失败原因",failedPrintsCount:"{{failed}} / {{total}} 次打印失败",lastWeekRate:"上周：{{rate}}%",resetLayout:"重置布局",recalculateCosts:"重新计算成本",recalculateCostsHint:"使用当前耗材价格重新计算所有归档成本",exportStats:"导出统计",exportAsCsv:"导出为 CSV",exportAsExcel:"导出为 Excel",hiddenCount:"{{count}} 个已隐藏",exportDownloaded:"导出已下载",exportFailed:"导出失败",layoutReset:"布局已重置",recalculatedCosts:"已为 {{count}} 个归档重新计算成本",recalculateFailed:"重新计算成本失败",loadingStats:"加载统计数据中...",noPermissionResetLayout:"您没有重置布局的权限",noPermissionRecalculate:"您没有重新计算成本的权限",noPrintDataInRange:"所选范围内无打印数据",periodFilament:"期间耗材",periodCost:"期间成本",avgPerPrint:"每次打印平均",usageOverTime:"随时间的使用量",filamentByWeight:"重量",printDuration:"打印时长",printerUtilization:"打印机利用率",filamentSuccess:"按材料成功率",printHabits:"打印习惯",printTimeOfDay:"打印时段",colorDistribution:"颜色分布",noColorData:"暂无颜色数据",records:"记录",longestPrint:"最长打印",heaviestPrint:"最重打印",mostExpensivePrint:"最贵打印",busiestDay:"最忙碌的一天",successStreak:"连续成功",streakPrint:"连续打印",streakPrints:"{{count}} 次连续打印",printerStats:"打印机统计",hours:"小时",avgPrints:"平均打印",noArchiveData:"暂无打印数据",filamentByTime:"时间",avgWeight:"平均重量",avgTime:"平均时间",filamentByPrints:"打印次数",timeframe:{today:"今天","this-week":"本周","this-month":"本月","last-7":"最近 7 天","last-30":"最近 30 天","last-90":"最近 90 天","this-year":"今年","all-time":"全部时间",custom:"自定义范围",from:"从",to:"到"},allUsers:"所有用户",noUser:"无用户（系统）",filterByUser:"按用户筛选"},maintenance:{title:"维护",overview:"概览",allOk:"所有维护均已完成",dueCount:"{{count}} 项到期",dueCount_plural:"{{count}} 项到期",warningCount:"{{count}} 个警告",warningCount_plural:"{{count}} 个警告",totalPrintTime:"总打印时间",nextMaintenance:"下次维护",nothingDue:"无到期项目",tasks:"任务",lastPerformed:"上次执行",interval:"间隔",hoursRemaining:"剩余 {{hours}} 小时",hoursOverdue:"逾期 {{hours}} 小时",markDone:"标记为完成",performMaintenance:"执行维护",history:"历史",noHistory:"无维护历史",editPrintHours:"编辑打印时间",currentHours:"当前小时数",statusTab:"状态",settingsTab:"设置",overdueCount:"{{count}} 个逾期",dueSoonCount:"{{count}} 个即将到期",dueSoon:"即将到期",allGood:"一切正常",overdueBy:"逾期 {{duration}}",dueIn:"{{duration}} 后到期",timeLeft:"剩余 {{duration}}",day:"1 天",days:"{{count}} 天",week:"1 周",weeks:"{{count}} 周",month:"1 个月",months:"{{count}} 个月",year:"1 年",maintenanceTypes:"维护类型",maintenanceTypesDescription:"系统类型和您的自定义维护任务",addCustomType:"添加自定义类型",restoreDefaults:"恢复默认任务",intervalType:"间隔类型",intervalValue:"间隔 ({{type}})",icon:"图标",documentationLink:"文档链接（可选）",assignToPrinters:"分配给打印机",selectAtLeastOnePrinter:"至少选择一台打印机",addType:"添加类型",custom:"自定义",printHours:"打印小时数",calendarDays:"日历天数",exampleName:"例如：更换 HEPA 过滤器",viewDocumentation:"查看文档",timeBasedInterval:"基于时间的间隔",intervalOverrides:"间隔覆盖",intervalOverridesDescription:"为特定打印机自定义间隔",assignedToPrinters:"已分配给打印机：",noPrintersAssigned:"未分配打印机",addPrinterShort:"添加：",printersAssignedClick:"已分配 {{count}} 台打印机 - 点击管理",removeFromPrinter:"从此打印机移除",types:{lubricateCarbonRods:"润滑碳纤维杆",lubricateRails:"润滑线性导轨",cleanNozzle:"清洁喷嘴/热端",checkBelts:"检查皮带张力",cleanBuildPlate:"清洁构建板",checkExtruder:"检查挤出机齿轮",checkCooling:"检查冷却风扇",generalInspection:"综合检查",cleanCarbonRods:"清洁碳纤维杆",lubricateSteelRods:"润滑钢杆",cleanSteelRods:"清洁钢杆",cleanLinearRails:"清洁线性导轨",checkPtfeTube:"检查 PTFE 管",replaceHepaFilter:"更换 HEPA 过滤器",replaceCarbonFilter:"更换活性炭过滤器",lubricateLeftNozzleRail:"润滑左喷嘴导轨"},maintenanceComplete:"维护已标记为完成",typeUpdated:"维护类型已更新",typeDeleted:"维护类型已删除",defaultsRestored:"已恢复 {{count}} 个默认任务",printHoursUpdated:"打印小时数已更新",printerAssigned:"打印机已分配",printerRemoved:"打印机已移除",deleteTypeConfirm:'删除"{{name}}"？',deleteSystemTypeTitle:"删除默认维护任务？",deleteSystemTypeMessage:'确定要删除默认维护任务"{{name}}"吗？',noPermissionUpdate:"您没有更新维护项目的权限",noPermissionPerform:"您没有执行维护的权限",noPermissionEditTypes:"您没有编辑维护类型的权限",noPermissionDeleteTypes:"您没有删除维护类型的权限",noPermissionEditHours:"您没有编辑打印时间的权限",noPermissionRemovePrinter:"您没有移除打印机分配的权限",noPermissionAssignPrinter:"您没有分配打印机的权限",noPermissionEditIntervals:"您没有编辑间隔的权限",configureSettings:"配置维护类型和间隔"},settings:{title:"设置",general:"通用",tabs:{general:"通用",smartPlugs:"智能插座",notifications:"通知",queue:"工作流",filament:"耗材",network:"网络",apiKeys:"API 密钥",virtualPrinter:"虚拟打印机",spoolbuddy:"SpoolBuddy",failureDetection:"故障检测",users:"身份验证",backup:"备份",emailAuth:"邮箱认证",ldap:"LDAP",twoFa:"双因素认证",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy 设备",infoBody:"SpoolBuddy kiosk 通过心跳自动注册。如果设备不再使用，或守护进程崩溃遗留了陈旧的重复项，可在此注销。",duplicatesTitle:"已注册 {{count}} 台设备",duplicatesBody:"kiosk 界面只使用最先注册的设备。如果其中有因崩溃遗留的陈旧重复项，请注销它——在线设备会在下次心跳时重新注册自己。",empty:"尚未注册任何 SpoolBuddy 设备。",online:"在线",offline:"离线",unregister:"注销",unregisterSuccess:"设备已注销",unregisterError:"注销设备失败",confirmTitle:"注销 SpoolBuddy 设备？",confirmBody:'将从数据库中移除 "{{hostname}}" ({{deviceId}})。如果设备在线，会在下次心跳时重新注册自己。',ipAddress:"IP 地址",firmware:"固件",lastSeen:"上次在线",daemonUptime:"守护进程运行时间",systemUptime:"系统运行时间",never:"从未",nfc:"NFC",scale:"秤",cpuTemp:"CPU 温度",memory:"内存",disk:"磁盘",update:"更新",updateConfirmTitle:"更新 SpoolBuddy 守护进程？",updateConfirmBody:'对 "{{hostname}}" 触发软件更新？更新完成后守护进程将重启。',restartBrowser:"重启浏览器",restartBrowserConfirmTitle:"重启 kiosk 浏览器？",restartBrowserConfirmBody:'在 "{{hostname}}" 上重启 kiosk 浏览器？显示将短暂黑屏。',restartDaemon:"重启守护进程",restartDaemonConfirmTitle:"重启 SpoolBuddy 守护进程？",restartDaemonConfirmBody:'在 "{{hostname}}" 上重启 SpoolBuddy 守护进程？设备将离线几秒钟。',reboot:"重启",rebootConfirmTitle:"重启设备？",rebootConfirmBody:'重启 "{{hostname}}"？设备将离线约一分钟。',shutdown:"关机",shutdownConfirmTitle:"关闭设备？",shutdownConfirmBody:'关闭 "{{hostname}}"？您需要物理访问才能重新开机。',commandConfirm:"确认",commandQueued:"命令已加入队列",commandError:"发送命令失败"},ldap:{title:"LDAP 认证",enabledDesc:"LDAP 认证已启用",disabledDesc:"LDAP 认证已禁用",disabledHint:"在下方配置并保存 LDAP 设置，然后启用。",enabled:"LDAP 认证已启用",disabled:"LDAP 认证已禁用",feature1:"用户可以使用 LDAP 凭据登录",feature2:"本地管理员帐户作为后备保留",feature3:"登录时 LDAP 组映射到 BamBuddy 组",serverConfig:"LDAP 服务器配置",serverUrl:"服务器 URL",serverUrlHint:"使用 ldap:// 进行标准连接或 ldaps:// 进行 SSL 连接",security:"安全",securityHint:"StartTLS 将普通连接升级为 TLS。LDAPS 从一开始就使用 TLS。",bindDn:"绑定 DN（服务帐户）",bindPassword:"绑定密码",searchBase:"搜索基础 DN",userFilter:"用户搜索过滤器",userFilterHint:"{username} 替换为登录用户名。OpenLDAP 使用 (uid={username})。",autoProvision:"自动创建用户",autoProvisionHint:"首次 LDAP 登录时自动创建 BamBuddy 帐户",defaultGroup:"默认组",defaultGroupNone:"— 无（无回退）—",defaultGroupHint:"当 LDAP 用户通过身份验证但不在任何已映射的 LDAP 组中时分配的回退组。留空以使未映射的用户没有权限。",groupMapping:"组映射（JSON）",groupMappingHint:"将 LDAP 组 DN 映射到 BamBuddy 组。可用组：",testConnection:"测试连接",settingsSaved:"LDAP 设置已保存",errors:{serverRequired:"LDAP 服务器 URL 为必填项",searchBaseRequired:"搜索基础 DN 为必填项",enableAuthFirst:"请先启用认证",configureLdapFirst:"请先保存 LDAP 设置"}},email:{smtpSettings:"SMTP 配置",smtpHost:"SMTP 服务器",smtpPort:"SMTP 端口",security:"安全",authentication:"认证",username:"用户名",password:"密码",fromEmail:"发件邮箱",fromName:"发件人名称",testConnection:"测试 SMTP 连接",testRecipient:"测试收件邮箱",sendTest:"发送测试邮件",sending:"发送中...",save:"保存设置",saving:"保存中...",advancedAuth:"高级认证",advancedAuthEnabled:"高级认证已启用",advancedAuthEnabledDesc:"基于邮箱的用户管理功能已激活。新用户将通过邮件收到自动生成的密码，用户可以通过忘记密码功能重置密码。",advancedAuthDisabled:"高级认证已禁用",advancedAuthDisabledDesc:"启用高级认证以激活基于邮箱的用户管理功能。",enable:"启用",disable:"禁用",feature1:"密码自动生成并通过邮件发送给新用户",feature2:"用户可以使用用户名或邮箱登录",feature3:"忘记密码功能可用",feature4:"管理员可以通过邮件重置用户密码",errors:{requiredFields:"请填写所有必填字段",usernameRequired:"启用认证时需要用户名",enterTestEmail:"请输入测试邮箱地址",smtpServerAndEmail:"测试前请填写 SMTP 服务器和发件邮箱",usernamePasswordRequired:"启用认证时需要用户名和密码",configureSmtpFirst:"请先配置并测试 SMTP 设置",enableAuthFirst:"请先启用身份验证才能使用基于电子邮件的功能。"},success:{settingsSaved:"SMTP 设置保存成功"},securityOptions:{starttls:"STARTTLS（端口 587）",ssl:"SSL/TLS（端口 465）",none:"无（端口 25）"},authOptions:{enabled:"已启用",disabled:"已禁用"}},appearance:"外观",notifications:"通知",smartPlugs:"智能插座",spoolman:"Spoolman",updates:"更新",language:"语言",languageDescription:"选择您的首选语言",theme:"主题",themeLight:"浅色",themeDark:"深色",themeSystem:"跟随系统",defaultView:"默认视图",defaultViewDescription:"打开应用时显示的页面",checkForUpdates:"检查更新",autoUpdate:"自动更新",currentVersion:"当前版本",latestVersion:"最新版本",upToDate:"已是最新版本",updateAvailable:"有可用更新",notificationLanguage:"通知语言",notificationLanguageDescription:"推送通知的语言",bedCooledThreshold:"热床冷却阈值",bedCooledThresholdDescription:"打印后热床被视为已冷却的温度",userNotificationsEnabled:"用户通知",userNotificationsEnabledDescription:"启用用户通知菜单和打印任务事件的邮件通知。需要高级身份验证。",userNotificationsDisabledHint:"请启用高级身份验证以使用用户通知。",notificationProviders:"通知提供商",addProvider:"添加提供商",editProvider:"编辑提供商",providerType:"提供商类型",testNotification:"测试通知",testSuccess:"测试通知发送成功",testFailed:"发送测试通知失败",quietHours:"免打扰时间",quietHoursDescription:"在此时间段内不发送通知",quietHoursStart:"开始",quietHoursEnd:"结束",events:{title:"通知事件",printStart:"打印开始",printComplete:"打印完成",printFailed:"打印失败",printStopped:"打印停止",printProgress:"进度里程碑",printProgressDescription:"在 25%、50%、75% 时通知",printerOffline:"打印机离线",printerError:"打印机错误",filamentLow:"耗材不足",maintenanceDue:"维护到期",maintenanceDueDescription:"需要维护时通知"},smartPlug:{title:"智能插座",add:"添加智能插座",edit:"编辑智能插座",name:"名称",ipAddress:"IP 地址",linkedPrinter:"关联打印机",autoOn:"自动开启",autoOnDescription:"打印开始时开启",autoOff:"自动关闭",autoOffDescription:"打印完成后关闭",offDelay:"关闭延迟",offDelayMinutes:"打印后分钟数",offDelayTemp:"当喷嘴温度低于",currentState:"当前状态",turnOn:"开启",turnOff:"关闭"},filamentTracking:"耗材追踪",filamentTrackingDesc:"选择如何追踪您的耗材。您可以使用内置库存或连接外部 Spoolman 服务器。",filamentChecks:"耗材检查",disableFilamentWarnings:"禁用耗材警告",disableFilamentWarningsDesc:"在打印或加入队列时不显示耗材不足警告",preferLowestFilament:"优先使用剩余最少的耗材",preferLowestFilamentDesc:"当多个料盘匹配时，使用剩余耗材最少的那个",trackingModeBuiltIn:"内置库存",trackingModeBuiltInDesc:"包含 RFID 自动匹配和用量追踪",trackingModeSpoolmanDesc:"外部耗材管理服务器",builtInFeatureRfid:"自动检测 AMS 中的拓竹 RFID 耗材",builtInFeatureUsage:"追踪每次打印的耗材消耗",builtInFeatureCatalog:"管理耗材、颜色和 K 值配置文件",builtInFeatureThirdParty:"第三方耗材可分配到库存耗材",amsSyncButton:"从 AMS 同步重量",amsSyncTitle:"从 AMS 同步耗材重量",amsSyncMessage:"这将使用已连接打印机的当前 AMS 剩余百分比值覆盖所有库存耗材重量。用于从损坏的重量数据中恢复。打印机必须在线。",amsSyncing:"同步中...",amsSyncSuccess:"已同步 {{synced}} 个耗材，跳过 {{skipped}} 个",amsSyncError:"从 AMS 同步重量失败",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman 服务器的 URL（例如 http://localhost:7912）",spoolmanConnected:"已连接",spoolmanDisconnected:"未连接",status:"状态",connect:"连接",disconnect:"断开",howSyncWorks:"同步工作原理",syncInfoRfidOnly:"仅同步带有 RFID 的官方拓竹耗材",syncInfoAutoCreate:"首次同步时自动在 Spoolman 中创建新耗材",syncInfoThirdPartySkipped:"非拓竹耗材（第三方、重新填充的）将被跳过",linkingExistingSpools:"链接现有耗材",linkingExistingSpoolsDesc:'要将现有的 Spoolman 耗材链接到您的 AMS，请将鼠标悬停在 AMS 槽位上并点击"链接到 Spoolman"。',syncMode:"同步模式",syncModeAuto:"自动",syncModeManual:"仅手动",syncModeAutoDesc:"检测到更改时自动同步 AMS 数据",syncModeManualDesc:"仅在手动触发时同步",syncAmsData:"同步 AMS 数据",syncAmsDataDesc:"手动将打印机 AMS 数据同步到 Spoolman",allPrinters:"所有打印机",noDefaultPrinter:"无默认（每次询问）",sidebarOrder:"侧边栏顺序",saveThumbnails:"保存缩略图",captureFinishPhoto:"拍摄完成照片",noPrintersConfigured:"未配置打印机",archiveMode:{always:"始终创建归档条目",never:"从不创建归档条目",ask:"每次询问"},checkForUpdatesLabel:"检查更新",checkPrinterFirmware:"检查打印机固件",includeBetaUpdates:"包含测试版本",includeBetaUpdatesDesc:"检查更新时通知测试版和预发布版本",enableRetry:"启用重试",homeAssistantDescription:"通过 Home Assistant 控制智能插座",environmentManagedLabel:"（环境变量管理）",autoEnabledViaEnv:"通过环境变量自动启用",urlFromEnvReadOnly:"值由 HA_URL 环境变量设置（只读）",tokenFromEnvReadOnly:"值由 HA_TOKEN 环境变量设置（只读）",mqttConnectedTo:"已连接到",prometheusDescription:"以 Prometheus 格式暴露打印机数据",noSmartPlugsTitle:"未配置智能插座",noSmartPlugsDescription:"添加基于 Tasmota 的智能插座以追踪能耗并自动化电源控制。",noProvidersTitle:"未配置提供商",noProvidersDescription:"添加提供商以接收警报。",noTemplatesAvailable:"无可用模板。重启后端以加载默认模板。",apiPermissionView:"查看打印机状态和队列",apiPermissionEdit:"添加和移除打印队列中的项目",apiKeysEmptyTitle:"无 API 密钥",apiKeysEmptyDescription:"创建 API 密钥以与外部服务集成。",noUsersFound:"未找到用户",noGroupsFound:"未找到组",noGroupsAvailable:"无可用组",passwordsDoNotMatch:"密码不匹配",systemGroupWarning:"系统组名称不可更改",authDisabledTitle:"身份验证已禁用",authDisabledFeature1:"需要登录才能访问系统",authDisabledFeature2:"创建多个用户并基于组的权限管理",authDisabledFeature3:"使用 50+ 个细粒度权限控制访问",userHasCreated:"此用户已创建：",userItemsQuestion:"您想如何处理这些项目？",deleteUserConfirm:"确定要删除此用户吗？",actionCannotBeUndone:"此操作无法撤销。",addFirstSmartPlug:"添加您的第一个智能插座",providers:"提供商",log:"日志",testAll:"全部测试",testResults:"测试结果",testPassedCount:"{{count}} 个通过",testFailedCount:"{{count}} 个失败",messageTemplates:"消息模板",messageTemplatesDescription:"自定义每个事件的通知消息。",apiKeys:"API 密钥",apiKeysDescription:"创建 API 密钥用于外部集成和 Webhook。",createKey:"创建密钥",apiKeyCreated:"API 密钥创建成功",apiKeyCopyWarning:"请立即复制此密钥 - 它不会再次显示！",useInApiBrowser:"在 API 浏览器中使用",createNewApiKey:"创建新 API 密钥",keyName:"密钥名称",keyNamePlaceholder:"例如：Home Assistant、OctoPrint",readStatus:"读取状态",readStatusDescription:"查看打印机状态和队列",manageQueue:"管理队列",manageQueueDescription:"添加和移除打印队列中的项目",controlPrinter:"控制打印机",controlPrinterDescription:"暂停、继续和停止打印",unnamedKey:"未命名密钥",lastUsed:"上次使用",read:"读取",control:"控制",createFirstKey:"创建您的第一个密钥",webhookEndpoints:"Webhook 端点",webhookApiKeyHint:"在 X-API-Key 请求头中使用您的 API 密钥。",webhook:{getAllStatus:"获取所有打印机状态",getSpecificStatus:"获取特定打印机状态",addToQueue:"添加到打印队列",pausePrint:"暂停打印",resumePrint:"继续打印",stopPrint:"停止打印"},apiBrowser:"API 浏览器",apiBrowserDescription:"浏览和测试所有可用的 API 端点。",apiKeyForTesting:"测试用 API 密钥",apiKeyPlaceholder:"在此粘贴您的 API 密钥以测试需要认证的端点...",apiKeyHint:"此密钥将作为 X-API-Key 请求头随请求发送。",deleteApiKeyTitle:"删除 API 密钥",deleteApiKeyMessage:"确定要删除此 API 密钥吗？使用此密钥的所有集成将停止工作。",deleteKey:"删除密钥",amsDisplayThresholds:"AMS 显示阈值",amsThresholdsDescription:"配置 AMS 湿度和温度指示器的颜色阈值。",humidity:"湿度",goodGreen:"良好（绿色）",fairOrange:"一般（橙色）",aboveFairBad:"超过一般阈值显示为红色（差）",fairAlsoDryingThreshold:"此阈值也用于触发自动干燥",temperature:"温度",goodBlue:"良好（蓝色）",aboveFairHot:"超过一般阈值显示为红色（热）",historyRetention:"历史保留",keepSensorHistory:"保留传感器历史",historyRetentionDescription:"较旧的湿度和温度数据将被自动删除",defaultPrintOptions:"默认打印选项",defaultPrintOptionsDescription:"设置新打印的默认选项值。可在打印对话框中逐次覆盖。",defaultBedLevelling:"热床调平",defaultBedLevellingDesc:"打印前自动调平热床",defaultFlowCali:"流量校准",defaultFlowCaliDesc:"校准挤出流量",defaultVibrationCali:"振动校准",defaultVibrationCaliDesc:"减少振纹伪影",defaultLayerInspect:"首层检测",defaultLayerInspectDesc:"AI首层检测",defaultTimelapse:"延时摄影",defaultTimelapseDesc:"录制延时摄影视频",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"热床清空确认",requirePlateClear:"需要热床清空确认",requirePlateClearDescription:"启用后，调度器会在已完成打印的打印机上启动排队打印之前，等待每台打印机的热床清空确认。禁用后，也会隐藏打印机卡片上的打印板状态标记和“将打印板标记为已清理”按钮。",gcodeInjection:"G-code注入",gcodeInjectionDescription:'为Farmloop、SwapMod、AutoClear和Printflow 3D等自动打印系统配置自定义G-code，在打印开始和/或结束时注入。代码片段按打印机型号配置，在队列项目上启用"注入G-code"时应用。',gcodeInjectionNoPrinters:"未找到打印机。添加打印机以配置G-code代码片段。",gcodeStartLabel:"开始G-code",gcodeEndLabel:"结束G-code",gcodeStartPlaceholder:"在打印开始前插入的G-code...",gcodeEndPlaceholder:"在打印结束后追加的G-code...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"自动干燥",queueDryingDescription:"在队列打印之间，打印机空闲时自动干燥AMS耗材。使用上方的湿度阈值触发干燥。",queueDryingEnabled:"启用自动干燥",queueDryingEnabledDescription:"当打印机空闲且湿度超过阈值时，自动启动AMS干燥",queueDryingBlock:"等待干燥完成",queueDryingBlockDescription:"阻止打印队列直到干燥完成。关闭时，打印优先于干燥。",ambientDryingEnabled:"环境干燥",ambientDryingEnabledDescription:"当空闲打印机的湿度超过阈值时自动干燥耗材，无需排队打印。",dryingPresets:"干燥预设",dryingPresetsDescription:"每种耗材类型的温度和时长。AMS 2 Pro使用较低温度，AMS-HT支持较高温度。",dryingFilament:"耗材",printModal:"打印对话框",expandCustomMapping:"默认展开自定义映射",expandCustomMappingDescription:"打印到多台打印机时，默认展开显示每台打印机的 AMS 映射",authentication:"身份验证",authEnabledDescription:"您的实例已通过用户身份验证保护",authDisabledDescription:"启用以要求登录并管理用户访问",authDisabledMessage:"启用身份验证以创建用户账户、管理权限并保护您的 Bambuddy 实例。",enableAuthentication:"启用身份验证",currentUser:"当前用户",changePassword:"修改密码",admin:"管理员",users:"用户",addUser:"添加用户",groups:"组",addGroup:"添加组",system:"系统",noDescription:"无描述",userCount:"{{count}} 个用户",permissionCount:"{{count}} 个权限",createUser:"创建用户",username:"用户名",enterUsername:"输入用户名",password:"密码",enterPassword:"输入密码（至少 6 个字符）",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认密码",viewReleaseOnGitHub:"在 GitHub 上查看发布",turnAllPlugsOn:"开启所有插座",turnAllPlugsOff:"关闭所有插座",clearNotificationLogs:"清除通知日志",clearLogsMessage:"这将永久删除所有 30 天前的通知日志。此操作无法撤销。",clearLogs:"清除日志",resetUiPreferences:"重置 UI 偏好",resetUiPreferencesMessage:"这将重置所有 UI 偏好为默认值：侧边栏顺序、主题、仪表板布局、视图模式和排序偏好。您的打印机、归档和服务器设置不会受到影响。清除后页面将重新加载。",resetPreferences:"重置偏好",deleteGroupTitle:"删除组",deleteGroupMessage:"确定要删除此组吗？此组中的用户将失去这些权限。",deleteGroup:"删除组",disableAuthenticationTitle:"禁用身份验证",disableAuthenticationMessage:"确定要禁用身份验证吗？这将使您的 Bambuddy 实例无需登录即可访问。所有用户将保留在数据库中但身份验证将被禁用。",disableAuthentication:"禁用身份验证",configureBambuddy:"配置 Bambuddy",systemDefault:"系统默认",archiveSettings:"归档设置",newWindow:"新窗口",embeddedOverlay:"嵌入式叠加层",preferredSlicer:"首选切片软件",preferredSlicerDescription:"选择要用于打开文件的切片软件",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"外部摄像头",costTracking:"成本追踪",printsOnly:"仅打印",totalConsumption:"总消耗",dataManagement:"数据管理",storageUsage:"存储使用情况",storageUsageDescription:"按类别的数据使用情况明细",storageUsageTotal:"总计",storageUsageErrors:"错误",storageUsageOtherBreakdown:"其他（包括静态资源、脚本和配置文件）",storageUsageSystem:"系统",storageUsageData:"数据",storageUsageUnavailable:"存储使用信息不可用",clearNotificationLogsDescription:"删除 30 天前的通知日志",resetUiPreferencesDescription:"重置侧边栏顺序、主题、视图模式和布局偏好。打印机、归档和设置不受影响。",enableHomeAssistant:"启用 Home Assistant",enableMqtt:"启用 MQTT",useTls:"使用 TLS",enableMetricsEndpoint:"启用指标端点",availableMetrics:"可用指标",editUser:"编辑用户",deleteUserTitle:"删除用户",groupName:"组名称",leaveEmptyForAnonymous:"留空为匿名",leaveEmptyForNoAuth:"留空为无认证",enterNewPassword:"输入新密码",confirmNewPassword:"确认新密码",enterGroupName:"输入组名称",enterDescriptionOptional:"输入描述（可选）",enterCurrentPassword:"输入当前密码",enterNewPasswordMin6:"输入新密码（至少 6 个字符）",toast:{keyCopied:"密钥已复制到剪贴板",copyFailed:"复制密钥失败",keyAddedToBrowser:"密钥已添加到 API 浏览器",clearLogsFailed:"清除日志失败",uiPreferencesReset:"UI 偏好已重置。刷新中...",authDisabled:"身份验证已成功禁用",authDisableFailed:"禁用身份验证失败",apiKeyCreated:"API 密钥已创建",apiKeyDeleted:"API 密钥已删除",userCreated:"用户创建成功",userUpdated:"用户更新成功",userDeleted:"用户删除成功",groupCreated:"组创建成功",groupUpdated:"组更新成功",groupDeleted:"组删除成功",fillRequiredFields:"请填写所有必填字段",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符",enterGroupName:"请输入组名称",settingsSaved:"设置已保存",noPermissionUpdate:"您没有权限更改设置",cameraSettingsSaved:"摄像头设置已保存",enterCameraUrl:"请输入摄像头 URL",passwordChanged:"密码修改成功",connectionFailed:"连接失败",testFailed:"测试失败",cameraConnected:"摄像头已连接{{resolution}}"},testConnection:"测试连接",catalog:{spoolCatalog:"耗材目录",spoolCatalogDescription:"按品牌/类型的空耗材重量。用于添加耗材时的自动重量查找。",searchCatalog:"搜索目录...",addNewEntry:"添加新条目",namePlaceholder:"名称（例如：Bambu Lab - 塑料）",weight:"重量",type:"类型",default:"默认",custom:"自定义",noMatch:"没有条目匹配您的搜索",empty:"目录中没有条目",deleteEntry:"删除条目",deleteConfirm:'确定要删除"{{name}}"吗？',resetCatalog:"重置目录",resetConfirm:"重置目录为默认值？这将移除所有自定义条目。",loadFailed:"加载耗材目录失败",nameWeightRequired:"名称和重量为必填项",entryAdded:"条目已添加",addFailed:"添加条目失败",entryUpdated:"条目已更新",updateFailed:"更新条目失败",entryDeleted:"条目已删除",deleteFailed:"删除条目失败",resetSuccess:"目录已重置为默认值",resetFailed:"重置目录失败",exported:"已导出 {{count}} 条",imported:"已导入 {{added}} 条（跳过 {{skipped}} 条）",importFailed:"导入失败：无效的 JSON 格式",exportTooltip:"导出目录为 JSON",importTooltip:"从 JSON 导入目录",resetTooltip:"重置为默认值",selectedCount:"已选择 {{count}} 项",deleteSelected:"删除所选",bulkDeleteConfirm:"确定要删除 {{count}} 个条目吗？",bulkDeleted:"已删除 {{count}} 个条目",bulkDeleteFailed:"删除条目失败"},colorCatalog:{title:"颜色目录",description:"按制造商/材料的耗材颜色。用于添加耗材时的自动颜色查找。",searchColors:"搜索颜色...",allManufacturers:"所有制造商",addNewColor:"添加新颜色",manufacturer:"制造商",colorName:"颜色名称",hex:"十六进制",materialOptional:"材料（可选）",showing:"显示 {{filtered}} / {{total}} 种颜色",noMatch:"没有颜色匹配您的搜索",empty:"目录中没有颜色",deleteColor:"删除颜色",deleteConfirm:'确定要删除"{{name}}"吗？',resetCatalog:"重置颜色目录",resetConfirm:"重置目录为默认值？这将移除所有自定义颜色。",sync:"同步",starting:"启动中...",syncTooltip:"从 FilamentColors.xyz 同步（2000+ 种颜色，可能需要一分钟）",loadFailed:"加载颜色目录失败",fieldsRequired:"制造商、颜色名称和十六进制颜色为必填项",colorAdded:"颜色已添加",addFailed:"添加颜色失败",colorUpdated:"颜色已更新",updateFailed:"更新颜色失败",colorDeleted:"颜色已删除",deleteFailed:"删除颜色失败",resetSuccess:"颜色目录已重置为默认值",resetFailed:"重置目录失败",syncUpToDate:"已是最新（检查了 {{count}} 种颜色）",syncComplete:"添加了 {{added}} 种新颜色（{{skipped}} 种已存在）",syncError:"同步错误",syncFailed:"从 FilamentColors.xyz 同步失败",exported:"已导出 {{count}} 种颜色",imported:"已导入 {{added}} 种颜色（跳过 {{skipped}} 种）",importFailed:"导入失败：无效的 JSON 格式",selectedCount:"已选择 {{count}} 项",deleteSelected:"删除所选",bulkDeleteConfirm:"确定要删除 {{count}} 种颜色吗？",bulkDeleted:"已删除 {{count}} 种颜色",bulkDeleteFailed:"删除颜色失败"},dateFormat:"日期格式",dateFormatUs:"美式 (MM/DD/YYYY)",dateFormatEu:"欧式 (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"时间格式",timeFormat12:"12小时制 (3:30 PM)",timeFormat24:"24小时制 (15:30)",defaultPrinter:"默认打印机",defaultPrinterDescription:"为上传、重印和其他操作预选此打印机。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"拖拽侧边栏项目以重新排序。在此处重置为默认顺序。",setDefault:"设为默认",sidebarOrderSetDefaultHint:"设为默认将当前菜单顺序应用于尚未自定义的用户。",sidebarDefaultSet:"已设置默认菜单顺序。",sidebarDefaultCleared:"已清除默认菜单顺序。",sidebarDefaultFailed:"设置默认菜单顺序失败。",reset:"重置",darkMode:"深色模式",lightMode:"浅色模式",active:"(当前)",background:"背景",accent:"强调色",style:"样式",bgNeutral:"中性",bgWarm:"暖色",bgCool:"冷色",bgOled:"OLED 纯黑",bgSlate:"石板蓝",bgForest:"森林绿",accentGreen:"绿色",accentTeal:"青色",accentBlue:"蓝色",accentOrange:"橙色",accentPurple:"紫色",accentRed:"红色",styleClassic:"经典",styleGlow:"发光",styleVibrant:"鲜艳",themeToggleHint:"使用侧边栏中的太阳/月亮图标在深色和浅色模式之间切换。",autoArchivePrints:"自动归档打印",autoArchiveDescription:"打印完成时自动保存3MF文件",saveThumbnailsDescription:"从3MF文件中提取并保存预览图像",captureFinishPhotoDescription:"打印完成时从打印机摄像头拍照",ffmpegNotInstalled:"未安装ffmpeg",ffmpegRequired:"摄像头捕获需要ffmpeg。通过 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安装。",camera:"摄像头",cameraViewMode:"摄像头查看模式",cameraOverlayDescription:"摄像头在主屏幕上以可调大小的覆盖层打开",cameraWindowDescription:"摄像头在单独的浏览器窗口中打开",externalCamerasDescription:"配置外部摄像头以替换内置打印机摄像头。支持MJPEG流、RTSP、HTTP快照和USB摄像头（V4L2）。启用后，外部摄像头将用于实时查看和完成照片。",cameraPlaceholderUsb:"设备路径 (/dev/video0)",cameraPlaceholderUrl:"摄像头URL (rtsp://... 或 http://...)",cameraTypeMjpeg:"MJPEG 流",cameraTypeRtsp:"RTSP 流",cameraTypeSnapshot:"HTTP 快照",cameraTypeUsb:"USB 摄像头 (V4L2)",cameraRotation:"旋转",test:"测试",connected:"已连接",disconnected:"未连接",currency:"货币",defaultFilamentCost:"默认耗材成本（每公斤）",electricityCost:"每千瓦时电费",energyDisplayMode:"能源显示模式",energyModePrintDescription:"仪表板显示打印期间使用的能源总和",energyModeTotalDescription:"仪表板显示智能插座的累计能源",fileManager:"文件管理器",createArchiveEntry:"打印时创建归档条目",createArchiveEntryDescription:"从文件管理器打印时，可选择创建归档条目",lowDiskSpaceWarning:"磁盘空间不足警告",lowDiskSpaceDescription:"当可用磁盘空间低于此阈值时显示警告",printerFirmware:"打印机固件",checkFirmwareDescription:"检查Bambu Lab的打印机固件更新",bambuddySoftware:"Bambuddy 软件",autoCheckDescription:"启动时自动检查新版本",checkNow:"立即检查",updateAvailableVersion:"可用更新：v{{version}}",releaseNotes:"发布说明",updateViaDocker:"通过 Docker Compose 更新：",installUpdate:"安装更新",latestVersionRunning:"您正在运行最新版本",failedToCheckUpdates:"检查更新失败：{{error}}",backupRestore:"备份与恢复",backupRestoreDescription:"导出/导入设置并配置GitHub备份",goToBackup:"前往备份",externalUrl:"外部URL",externalUrlDescription:"Bambuddy可访问的外部URL。用于通知图像和外部集成。",bambuddyUrl:"Bambuddy URL",externalUrlHint:"包含协议和端口（例如：http://192.168.1.100:8000）",ftpRetry:"FTP重试",ftpRetryDescription:"当打印机WiFi不稳定时重试FTP操作。适用于3MF下载、打印上传、延时摄影下载和固件更新。",autoRetryDescription:"自动重试失败的FTP操作",retryAttempts:"重试次数",retryDelay:"重试延迟",connectionTimeout:"连接超时",time_one:"{{count}}次",time_other:"{{count}}次",second_one:"{{count}}秒",second_other:"{{count}}秒",nSeconds:"{{count}}秒",increaseForWeakWifi:"对WiFi信号弱的打印机增加此值",homeAssistant:"Home Assistant",homeAssistantFullDescription:"连接到Home Assistant，通过HA REST API控制智能插座。支持switch、light、input_boolean和script实体。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"长期访问令牌",haTokenHint:"在HA中创建令牌：个人资料 → 长期访问令牌 → 创建令牌",connectionSuccessful:"连接成功",connectionFailed:"连接失败",haConnectionSuccess:"已成功连接到Home Assistant。",haConnectionFailed:"连接Home Assistant失败。",mqttPublishing:"MQTT发布",mqttDescription:"将BamBuddy事件发布到外部MQTT代理，用于与Node-RED、Home Assistant和其他自动化系统集成。",mqttEnableDescription:"向外部MQTT代理发布事件",brokerHostname:"代理主机名",port:"端口",usernameOptional:"用户名（可选）",passwordOptional:"密码（可选）",topicPrefix:"主题前缀",topicPrefixHint:"主题格式：{{prefix}}/printers/<serial>/status 等",prometheusMetrics:"Prometheus 指标",prometheusEndpointDescription:"在 <code>/api/v1/metrics</code> 公开打印机指标，用于Prometheus/Grafana监控。",bearerTokenOptional:"Bearer令牌（可选）",bearerTokenHint:"设置后，请求必须包含 <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"连接状态",metricsPrinterState:"打印机状态（空闲/打印中等）",metricsPrintProgress:"打印进度 0-100%",metricsBedTemp:"热床温度",metricsNozzleTemp:"喷嘴温度",metricsPrintsTotal:"按结果分类的总打印数",metricsMore:"...以及更多（层数、风扇、队列、耗材用量）",smartPlugsDescription:"连接智能插座（Tasmota或Home Assistant）以自动化电源控制并跟踪打印机的能源使用情况。",allOn:"全部开启",allOff:"全部关闭",addSmartPlug:"添加智能插座",energySummary:"能源概要",currentPower:"当前功率",plugsOnline:"{{reachable}}/{{total}} 个插座在线",today:"今天",yesterday:"昨天",total:"总计",enablePlugsForSummary:"启用插座以查看能源概要",addNotificationProvider:"添加",systemBadge:"(系统)",creating:"创建中...",changing:"修改中...",deleteUserAndItems:"删除用户及其所有项目",deleteUserKeepItems:"删除用户，保留项目（将变为无主项目）",ok:"确定",twoFa:{totpTitle:"身份验证器应用 (TOTP)",totpDesc:"使用 Google Authenticator、Aegis 或 Authy 等应用。",emailOtpTitle:"邮件 OTP",emailOtpDesc:"登录时向 {{email}} 发送一次性验证码。",emailOtpNoEmail:"请先为账户添加邮箱地址以启用此方式。",addEmailFirst:"您的账户没有邮箱地址，请联系管理员添加。",setupTotp:"设置身份验证器应用",setupAuthApp:"设置身份验证器应用",setupInstructions:"使用身份验证器应用扫描二维码，然后输入验证码确认。",manualEntry:"无法扫描？请手动输入此密钥：",scannedContinue:"已扫描 — 继续",enterCodeToConfirm:"请输入身份验证器应用中的6位验证码以确认设置。",activate:"激活",disableTotp:"停用身份验证器",disableConfirmHint:"请输入有效的 TOTP 码或备用码来停用身份验证器。",totpDisabled:"身份验证器应用已停用。",emailOtpEnabled:"邮件 OTP 已启用。",emailOtpDisabled:"邮件 OTP 已停用。",smtpRequired:"请先配置并测试SMTP设置。",invalidCode:"无效验证码，请重试。",enableEmailOtp:"启用邮件 OTP",disableEmailOtp:"停用邮件 OTP",emailSetupEnterCode:"验证码已发送至您的邮箱地址。请在下方输入以确认您拥有此邮箱。",verifyAndEnable:"验证并启用",emailDisablePasswordHint:"请输入您的账户密码以确认停用邮件 OTP。",passwordPlaceholder:"输入您的密码",backupCodesTitle:"保存备用码",backupCodesWarning:"请将这些码保存在安全的地方。每个码只能使用一次，且不会再次显示。",backupCodesRemaining:"剩余 {{count}} 个备用码",savedCodes:"已保存",regenBackup:"重新生成备用码",regenBackupHint:"输入当前 TOTP 码以生成 10 个新备用码，所有现有备用码将失效。",newBackupCodes:"新备用码",linkedAccounts:"已关联的 SSO 账户",linkedAccountsDesc:"以下外部身份提供商已与您的账户关联。",oidcUnlinked:"账户已解除关联。"},oidc:{title:"SSO / OIDC 提供商",desc:"配置 OpenID Connect 提供商以实现单点登录。",addProvider:"添加提供商",newProvider:"新提供商",empty:"尚未配置 OIDC 提供商。",created:"提供商已创建。",updated:"提供商已更新。",deleted:"提供商已删除。",deleteTitle:"删除提供商",deleteMessage:'删除"{{name}}"？所有关联账户将断开连接。',form:{name:"显示名称",issuerUrl:"颁发者 URL",clientId:"客户端 ID",clientSecret:"客户端密钥",scopes:"作用域",iconUrl:"图标 URL（可选）",enabled:"已启用",autoCreate:"自动创建用户",autoCreateDesc:"首次登录时自动创建本地账户。",autoLink:"自动关联已有账户",autoLinkDesc:"首次登录时通过邮箱匹配现有本地账户并自动关联。",secretHint:"留空以保留当前",secretPlaceholder:"新密钥",emailClaim:"邮箱声明",emailClaimDesc:"用作邮箱身份的 JWT 声明。Azure Entra ID 请使用 'preferred_username' 或 'upn'（不发送 email_verified）。仅使用可信的声明名称。",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"要求邮箱已验证",requireEmailVerifiedDesc:"仅在提供商将邮箱声明标记为已验证时才接受。",requireEmailVerifiedWarning:"警告：将在未经验证的情况下接受邮箱。仅对受信任的提供商使用。",requireEmailVerifiedAutoLink:"请先禁用自动关联以更改此设置。"}}},notification:{printStarted:{title:"打印已开始",body:"{{printer}}：{{filename}} 已开始打印"},printCompleted:{title:"打印已完成",body:"{{printer}}：{{filename}} 已成功完成"},printFailed:{title:"打印失败",body:"{{printer}}：{{filename}} 打印失败"},printStopped:{title:"打印已停止",body:"{{printer}}：{{filename}} 已停止"},printProgress:{title:"打印进度",body:"{{printer}}：{{filename}} 已完成 {{percent}}%"},printerOffline:{title:"打印机离线",body:"{{printer}} 已离线"},printerError:{title:"打印机错误",body:"{{printer}}：{{error}}"},filamentLow:{title:"耗材不足",body:"{{printer}}：耗材即将用完"},maintenanceDue:{title:"维护到期",body:"{{printer}}：{{items}} 需要关注"}},errors:{generic:"出了点问题",networkError:"网络错误。请检查您的连接。",notFound:"未找到",unauthorized:"未授权",serverError:"服务器错误",validationError:"请检查您的输入",printerConnectionFailed:"连接打印机失败",saveFailed:"保存更改失败",deleteFailed:"删除失败",loadFailed:"加载数据失败"},hmsErrors:{title:"错误 - {{name}}",noErrors:"无错误",viewOnWiki:"在拓竹 Wiki 上查看",clearInstructions:"在打印机上清除错误以在此处消除它们。",clearErrors:"清除错误",clearSuccess:"HMS 错误已清除",clearFailed:"清除 HMS 错误失败"},mqttDebug:{title:"MQTT 调试日志",searchPlaceholder:"搜索主题或负载...",noMessages:"尚未记录消息",startLoggingHint:'点击"开始记录"以开始捕获 MQTT 消息',noMessagesMatch:"没有消息匹配您的筛选条件",adjustFilterHint:"尝试调整您的搜索或筛选条件",incoming:"传入",outgoing:"传出",loggingStopped:"记录已停止",loggingActive:"记录中 - 消息将自动刷新",startLogging:"开始记录",stopLogging:"停止记录",clearLog:"清除日志",topic:"主题",timestamp:"时间戳",direction:"方向",all:"全部"},printerFiles:{title:"文件管理器",storageUsed:"已用：",storageFree:"剩余：",filterPlaceholder:"筛选文件...",deleteButton:"删除",deleteFiles:"删除 {{count}} 个文件",deleteFileConfirm:'删除"{{name}}"？此操作无法撤销。',deleteFilesConfirm:"删除 {{count}} 个选中的文件？此操作无法撤销。",noFiles:"打印机上没有文件",loadingFiles:"加载文件中...",failedToLoad:"加载文件失败",toast:{filesDeleted:"已删除 {{count}} 个文件",deleteFailed:"删除失败：{{error}}"}},confirm:{delete:"确定要删除吗？",unsavedChanges:"您有未保存的更改。确定要离开吗？",clearQueue:"确定要清空队列吗？"},login:{title:"Bambuddy 登录",subtitle:"登录您的账户",username:"用户名",usernamePlaceholder:"输入您的用户名",usernameOrEmail:"用户名或邮箱",usernameOrEmailPlaceholder:"用户名或 @ 邮箱",password:"密码",passwordPlaceholder:"输入您的密码",signIn:"登录",signingIn:"登录中...",rememberMe:"记住我",forgotPassword:"忘记密码？",loginSuccess:"登录成功",loginFailed:"登录失败",enterCredentials:"请输入用户名和密码",enterEmail:"请输入您的电子邮件地址",oidcLoginFailed:"OIDC 登录失败",oidcErrors:{providerError:"身份提供商返回了一个错误",missingParameters:"OIDC 回调缺少必要参数",invalidState:"OIDC 状态无效或已被使用",stateExpired:"OIDC 登录会话已过期，请重试",providerNotFound:"未找到 OIDC 提供商",discoveryFailed:"无法获取 OIDC 发现文档",invalidDiscovery:"OIDC 发现文档无效",networkError:"OIDC 令牌交换时出现网络错误",badResponse:"OIDC 令牌交换时收到意外响应",noIdToken:"OIDC 提供商未返回 ID 令牌",validationFailed:"OIDC 令牌验证失败",nonceMismatch:"OIDC nonce 不匹配，可能存在重放攻击",missingSubClaim:"OIDC 令牌缺少 sub 声明",noLinkedAccount:"没有与此 OIDC 身份关联的本地帐户",accountInactive:"您的帐户已被停用",userResolutionFailed:"无法解析您的帐户",internalError:"OIDC 登录过程中发生内部错误",tokenExchangeFailed:"OIDC 令牌交换失败"},forgotPasswordTitle:"忘记密码",forgotPasswordMessage:"如果您忘记了密码，请联系系统管理员进行重置。",forgotPasswordEmailMessage:"输入您的邮箱地址，我们将向您发送新密码。",emailAddress:"邮箱地址",emailPlaceholder:"your.email@example.com",cancel:"取消",sending:"发送中...",sendResetEmail:"发送重置邮件",howToReset:"如何重置密码：",resetStep1:"联系您的 Bambuddy 管理员",resetStep2:"请他们在用户管理中重置您的密码",resetStep3:"他们可以为您设置一个临时密码",resetStep4:"使用新密码登录并在设置中修改密码",gotIt:"知道了",resetPassword:{title:"设置新密码",subtitle:"请在下方输入并确认您的新密码。",newPassword:"新密码",newPasswordPlaceholder:"至少 8 个字符",confirmPassword:"确认密码",confirmPasswordPlaceholder:"重复输入新密码",saving:"保存中…",submit:"设置新密码",backToLogin:"返回登录",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 8 个字符",resetFailed:"密码重置失败。链接可能已过期。"},twoFA:{title:"两步验证",subtitle:"您的账户已启用两步验证。请在下方输入验证码。",methodAuthenticator:"身份验证器应用",methodEmail:"邮箱验证码",methodBackup:"备用恢复码",instructionsTotp:"请打开您的身份验证器应用，输入 Bambuddy 的 6 位验证码。",instructionsEmail:"6 位验证码已发送至您的邮箱，有效期为 10 分钟。",instructionsEmailNotSent:"点击下方按钮，通过邮件获取验证码。",instructionsBackup:"请输入您的一个 8 位备用恢复码。每个恢复码只能使用一次。",sendCodeButton:"发送邮箱验证码",sendingCode:"发送中...",resendCode:"重新发送验证码",codeLabel:"验证码",backupCodeLabel:"备用恢复码",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"验证",verifyingButton:"验证中...",backToLogin:"← 返回登录页面",orContinueWith:"或通过以下方式登录",signInWith:"使用 {{provider}} 登录",enterCode:"请输入验证码",sendCodeFailed:"验证码发送失败",invalidCode:"无效验证码，请重试。"}},setup:{title:"Bambuddy 设置",subtitle:"为您的 Bambuddy 实例配置身份验证",enableAuth:"启用身份验证",adminAccount:"管理员账户",adminAccountDesc:"如果管理员用户已存在，将使用现有管理员账户启用身份验证。如需使用现有管理员，请将下方字段留空，或输入新凭据创建新管理员用户。",adminUsername:"管理员用户名",adminPassword:"管理员密码",optionalIfAdminExists:"（如管理员用户已存在则为可选）",adminUsernamePlaceholder:"输入管理员用户名（可选）",adminPasswordPlaceholder:"输入管理员密码（可选）",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认管理员密码",settingUp:"设置中...",completeSetup:"完成设置",toast:{authEnabledAdminCreated:"身份验证已启用并创建了管理员用户",authEnabledExistingAdmins:"使用现有管理员用户启用了身份验证",setupCompleted:"设置完成",enterBothCredentials:"请输入管理员用户名和密码，或将两者留空以使用现有管理员用户",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符"}},changePassword:{title:"修改密码",currentPassword:"当前密码",currentPasswordPlaceholder:"输入当前密码",newPassword:"新密码",newPasswordPlaceholder:"输入新密码（至少 6 个字符）",confirmPassword:"确认新密码",confirmPasswordPlaceholder:"确认新密码",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符",changing:"修改中...",success:"密码修改成功",failed:"密码修改失败"},plateAlert:{title:"打印已暂停！",message:"在构建板上检测到物体。打印已自动暂停。请清理打印板并继续打印。",understand:"我知道了"},camera:{title:"摄像头视图",invalidPrinterId:"无效的打印机 ID",live:"实时",snapshot:"快照",restartStream:"重启流",refreshSnapshot:"刷新快照",fullscreen:"全屏",exitFullscreen:"退出全屏",connectingToCamera:"连接摄像头中...",capturingSnapshot:"拍摄快照中...",connectionLost:"连接已断开",connectionFailed:"摄像头连接失败",reconnecting:"{{countdown}} 秒后重新连接...（第 {{attempt}}/{{max}} 次尝试）",reconnectNow:"立即重新连接",cameraUnavailable:"摄像头不可用",cameraUnavailableDesc:"请确保打印机已通电并已连接。",noCamera:"无可用摄像头",retry:"重试",cameraStream:"摄像头流",zoomOut:"缩小",zoomIn:"放大",resetZoom:"重置缩放",recording:"录制中",startRecording:"开始录制",stopRecording:"停止录制",chamberLight:"切换腔室灯"},groups:{title:"组管理",subtitle:"管理访问控制的权限组",backToSettings:"返回设置",createGroup:"创建组",noPermission:"您没有访问此页面的权限。",system:"系统",noDescription:"无描述",usersCount:"{{count}} 个用户",permissionsCount:"{{count}} 个权限",edit:"编辑",delete:"删除",toast:{created:"组创建成功",updated:"组更新成功",deleted:"组删除成功",enterGroupName:"请输入组名称"},modal:{editGroup:"编辑组",createGroup:"创建组",cancel:"取消",saving:"保存中...",creating:"创建中...",saveChanges:"保存更改"},form:{groupName:"组名称",groupNamePlaceholder:"输入组名称",systemGroupWarning:"系统组名称不可更改",description:"描述",descriptionPlaceholder:"输入描述（可选）",permissions:"权限（已选 {{count}} 个）"},deleteModal:{title:"删除组",message:"确定要删除此组吗？此组中的用户将失去这些权限。",confirm:"删除组"},editor:{title:"编辑组",createTitle:"创建组",search:"搜索权限...",selectAll:"全选",clearAll:"清除全部",permissionsSelected:"已选 {{count}} 个",noResults:"没有权限匹配您的搜索"}},users:{title:"用户管理",subtitle:"管理用户及其对 Bambuddy 实例的访问",backToSettings:"返回设置",createUser:"创建用户",noPermission:"您没有访问此页面的权限。",admin:"管理员",noGroups:"无组",active:"活跃",inactive:"非活跃",edit:"编辑",delete:"删除",system:"系统",noGroupsAvailable:"无可用组",table:{username:"用户名",groups:"组",status:"状态",actions:"操作"},toast:{created:"用户创建成功",updated:"用户更新成功",deleted:"用户删除成功",fillRequired:"请填写所有必填字段",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符"},modal:{createUser:"创建用户",editUser:"编辑用户",cancel:"取消",creating:"创建中...",saving:"保存中...",saveChanges:"保存更改",advancedAuthSubtitle:"使用高级认证"},form:{username:"用户名",usernamePlaceholder:"输入用户名",email:"邮箱",emailPlaceholder:"user@example.com",password:"密码",passwordPlaceholder:"输入密码",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认密码",newPasswordPlaceholder:"输入新密码",confirmNewPasswordPlaceholder:"确认新密码",leaveBlankToKeep:"留空以保持当前值",groups:"组",optional:"可选",autoGeneratedPassword:"将自动生成安全密码并通过邮件发送给用户。",passwordManagedByAdvancedAuth:'密码由高级认证管理。使用"重置密码"通过邮件向用户发送新密码。',resetPassword:"重置密码",resettingPassword:"重置密码中..."},deleteModal:{title:"删除用户",message:"确定要删除此用户吗？此操作无法撤销。",confirm:"删除用户"}},streamOverlay:{title:"流叠加层",invalidPrinterId:"无效的打印机 ID",cameraStream:"摄像头流",progress:"进度",eta:"预计完成时间",printerIdle:"打印机空闲",printerOffline:"打印机离线",status:{printing:"打印中",paused:"已暂停",finished:"已完成",failed:"失败",idle:"空闲",unknown:"未知"}},profiles:{title:"配置文件",subtitle:"管理您的切片预设和压力推进校准",tabs:{cloud:"云端配置文件",local:"本地配置文件",kprofiles:"K 值配置"},localProfiles:{title:"本地配置文件",subtitle:"从 OrcaSlicer 导入和管理切片预设",import:"导入配置文件",importDesc:"将 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 文件拖放到此处",importing:"导入中...",search:"搜索本地预设...",noPresets:"暂无本地预设",badge:"本地",edit:"编辑",delete:"删除",cancel:"取消",deleteConfirmTitle:"删除预设",deleteConfirm:"确定要删除此预设吗？此操作无法撤销。",source:"来源",inheritsFrom:"继承自",filamentType:"类型",vendor:"厂商",compatiblePrinters:"兼容打印机",nozzleTemp:"喷嘴温度",cost:"成本",density:"密度",pressureAdvance:"压力推进",filament:"耗材",process:"工艺",printer:"打印机",toast:{importSuccess:"已导入 {{count}} 个预设",importSkipped:"跳过 {{count}} 个预设（重复）",importError:"导入时出现 {{count}} 个错误",deleted:"预设已删除",updated:"预设已更新"}},connectedAs:"已连接为",logout:"退出登录",noLogoutPermission:"您没有退出登录的权限",failedToLoad:"加载配置文件失败",retry:"重试",time:{justNow:"刚刚",minsAgo:"{{count}} 分钟前",hoursAgo:"{{count}} 小时前",daysAgo:"{{count}} 天前"},toast:{loggedOut:"已退出登录"},login:{title:"连接到拓竹云",subtitle:"跨设备同步您的切片预设",email:"邮箱",password:"密码",region:"地区",regionGlobal:"全球",regionChina:"中国",verificationCode:"验证码",totpCode:"验证器代码",checkEmail:"检查您的邮箱 ({{email}}) 获取 6 位验证码",enterTotpHint:"输入验证器应用中的 6 位代码",accessToken:"访问令牌",accessTokenHint:"粘贴您的拓竹访问令牌（来自 Bambu Studio）",back:"返回",loginButton:"登录",verifyButton:"验证",setTokenButton:"设置令牌",useToken:"改用访问令牌",useEmail:"改用邮箱登录",toast:{loggedIn:"登录成功",codeSent:"验证码已发送到您的邮箱",enterTotp:"输入验证器应用中的代码",tokenSet:"令牌设置成功"}},presets:{myPreset:"我的预设（可编辑）",duplicate:"复制",editable:"可编辑",failedToLoadDetails:"加载预设详情失败",deleteConfirm:"删除此预设？",deleteWarning:'这将从拓竹云中永久删除"{{name}}"。此操作无法撤销。',noDuplicatePermission:"您没有复制预设的权限",noEditPermission:"您没有编辑预设的权限",noDeletePermission:"您没有删除预设的权限",types:{filament:"耗材预设",printer:"打印机预设",process:"工艺预设"},toast:{deleted:"预设已删除",created:"预设已创建",updated:"预设已更新",duplicated:"预设已复制",fieldAdded:'字段"{{key}}"已添加',exported:"预设已导出"},baseLabel:"基础：{{name}}",currentLabel:"当前：{{name}}",newPreset:"新建预设",editPreset:"编辑预设",duplicatePreset:"复制预设",createNewPreset:"创建新预设",customizeSettings:"自定义新预设的设置",compareWithBase:"与基础预设比较",compare:"比较",basePreset:"基础预设",selectBasePreset:"选择基础预设...",presetName:"预设名称",myCustomPreset:"我的自定义预设",inheritsFrom:"继承自",dropJsonToImport:"拖放 JSON 以导入",tabs:{common:"常用",allFields:"所有字段"},availableFields:"可用字段",searchFieldsPlaceholder:"搜索字段...",noMatchingFields:"没有匹配的字段",allFieldsAdded:"所有字段已添加",addCustomField:"添加自定义字段",yourOverrides:"您的覆盖值",noOverridesYet:"暂无覆盖值",clickFieldsToAdd:"点击左侧的字段进行添加",saveAsTemplate:"保存为模板",jsonTip:"提示：将 .json 文件拖放到此对话框的任意位置以导入设置"},cloudView:{searchPlaceholder:"搜索预设...",templates:"模板",refresh:"刷新",newPreset:"新建预设",clearFilters:"清除筛选",compareMode:"比较模式",selectAnotherPreset:"选择另一个 {{type}} 预设",clickTwoPresets:"点击两个相同类型的预设进行比较",selectFirst:"1. 选择第一个",selectSecond:"2. 选择第二个",compareNow:"立即比较",lastSynced:"上次同步：",showingCount:"显示 {{showing}} / {{total}} 个预设",noPresetsFound:"未找到预设",columns:{filament:"耗材",process:"工艺",printer:"打印机"},noFilamentPresets:"无耗材预设",noProcessPresets:"无工艺预设",noPrinterPresets:"无打印机预设",filters:{type:"类型",owner:"所有者",printer:"打印机",nozzle:"喷嘴",filament:"耗材",layer:"层",all:"全部",myPresets:"我的预设",builtIn:"内置",process:"工艺"},noTemplatesPermission:"您没有管理模板的权限",noRefreshPermission:"您没有刷新配置文件的权限",noCreatePermission:"您没有创建预设的权限"},templates:{title:"快速模板",noTemplates:"暂无模板",createFirst:"从预设编辑器创建模板",typeFilter:"类型：",deleteTitle:"删除模板",deleteWarning:"此操作无法撤销",deleteConfirm:'确定要删除"{{name}}"吗？',namePlaceholder:"模板名称",descriptionPlaceholder:"描述",settingsJson:"设置 (JSON)",fieldsCount:"{{count}} 个字段",shownInModals:"在对话框中显示",hiddenInModals:"在对话框中隐藏",apply:"应用",toast:{deleted:"模板已删除",updated:"模板已更新",created:"模板已创建",applied:"模板已应用"}}},support:{debugLoggingActive:"调试日志记录已激活",manageLogs:"管理",collectItem7:"打印机连接和固件版本",collectItem8:"集成状态（Spoolman、MQTT、HA）",collectItem9:"网络接口（仅子网）",collectItem10:"Python 包版本",collectItem11:"数据库健康检查",collectItem12:"Docker 环境详情"},fileManager:{title:"文件管理器",subtitle:"组织和管理您的打印文件",uploadFiles:"上传文件",newFolder:"新建文件夹",folderName:"文件夹名称",folderNamePlaceholder:"例如：功能零件",renameFile:"重命名文件",renameFolder:"重命名文件夹",moveFiles:"移动 {{count}} 个文件",rootNoFolder:"根目录（无文件夹）",current:"当前",linkFolder:"链接文件夹",linkFolderDescription:'将"{{name}}"链接到项目或归档以便快速访问。',project:"项目",archive:"归档",noProjectsFound:"未找到项目",noArchivesFound:"未找到归档",unlink:"取消链接",link:"链接",dragDropFiles:"将文件拖放到此处",dropFilesHere:"将文件放在此处",orClickToBrowse:"或点击浏览",allFileTypesSupported:"支持所有文件类型。ZIP 文件将被解压。",zipFilesDetected:"检测到 ZIP 文件",zipExtractOptions:"ZIP 文件将被解压。选择如何处理文件夹结构：",preserveZipStructure:"保留 ZIP 中的文件夹结构",createFolderFromZip:"从 ZIP 文件名创建文件夹",stlThumbnailGeneration:"STL 缩略图生成",zipMayContainStl:"ZIP 文件可能包含 STL 文件。可以在解压时生成缩略图。",thumbnailsCanBeGenerated:"可以为 STL 文件生成缩略图。大型模型可能需要更长时间处理。",generateThumbnailsForStl:"为 STL 文件生成缩略图",threemfDetected:"检测到 3MF 文件",threemfExtractionInfo:"将自动从 3MF 文件中提取打印机型号、材料、颜色和打印设置。",willBeExtracted:"将被解压",filesExtracted:"已解压 {{count}} 个文件",uploadComplete:"上传完成：{{succeeded}} 个成功",uploadFailed:"上传失败",zipFilesFailed:"{{count}} 个文件失败",uploading:"上传中...",changeLink:"更改链接...",linkTo:"链接到...",linkToProjectOrArchive:"链接到项目或归档",addToQueue:"添加到队列",schedulePrint:"排程",generateThumbnail:"生成缩略图",generateThumbnails:"生成缩略图",generateThumbnailsForMissing:"为缺少缩略图的 STL 文件生成缩略图",gridView:"网格视图",listView:"列表视图",lowDiskSpaceWarning:"磁盘空间不足警告",lowDiskSpaceDetails:"仅剩 {{free}}（总共 {{total}}）。阈值设置为 {{threshold}} GB。",files:"文件",folders:"文件夹",size:"大小",free:"剩余",allFiles:"所有文件",wrap:"换行",enableTextWrapping:"启用文本换行",disableTextWrapping:"禁用文本换行",collapse:"折叠",collapseFoldersByDefault:"默认折叠文件夹",expandFoldersByDefault:"默认展开文件夹",dragToResizeTooltip:"拖动调整大小，双击重置",searchFiles:"搜索文件...",allTypes:"所有类型",prints:"打印",ascending:"升序",descending:"降序",resultsCount:"{{showing}} / {{total}} 个文件",selectAll:"全选",deselectAll:"取消全选",selected:"已选择 {{count}} 个",adding:"添加中...",loadingFiles:"加载文件中...",folderIsEmpty:"文件夹为空",noFilesYet:"暂无文件",folderEmptyDescription:"上传文件或将文件移入此文件夹以开始使用。",noFilesDescription:"上传文件以开始组织您的打印相关文件。",noMatchingFiles:"没有匹配的文件",noMatchingFilesDescription:"没有文件匹配您当前的搜索或筛选条件。",clearFilters:"清除筛选",printedCount:"已打印 {{count}} 次",uploadedBy:"上传者",deleteFolder:"删除文件夹",deleteFile:"删除文件",deleteFilesCount:"删除 {{count}} 个文件",deleteFolderConfirm:"确定要删除此文件夹吗？其中的所有文件也将被删除。",deleteFileConfirm:"确定要删除此文件吗？",deleteFilesConfirm:"确定要删除 {{count}} 个选中的文件吗？此操作无法撤销。",deleting:"删除中...",noPermissionRenameFolder:"您没有重命名文件夹的权限",noPermissionLinkFolder:"您没有链接文件夹的权限",noPermissionDeleteFolder:"您没有删除文件夹的权限",noPermissionPrint:"您没有打印的权限",noPermissionSlice:"You do not have permission to slice files",noPermissionAddToQueue:"您没有添加到队列的权限",noPermissionDownload:"您没有下载文件的权限",noPermissionRenameFile:"您没有重命名此文件的权限",noPermissionGenerateThumbnail:"您没有生成缩略图的权限",noPermissionDeleteFile:"您没有删除此文件的权限",noPermissionCreateFolder:"您没有创建文件夹的权限",noPermissionUpload:"您没有上传文件的权限",noPermissionMoveFiles:"您没有移动文件的权限",noPermissionDeleteFiles:"您没有删除文件的权限",linkExternal:"链接外部",linkExternalFolder:"链接外部文件夹",linkExternalFolderDescription:"将主机目录（NAS、USB、网络共享）挂载到文件管理器中。文件不会被复制——直接从原始路径访问。",externalFolderNamePlaceholder:"例如：NAS打印文件",externalPath:"主机路径",externalPathHelp:"Docker主机上目录的绝对路径。必须以绑定挂载方式挂载到容器中。",readOnly:"只读",readOnlyHelp:"防止上传和删除",showHiddenFiles:"显示隐藏文件（点文件）",externalFolder:"外部文件夹",scanFolder:"扫描",toast:{folderCreated:"文件夹已创建",folderDeleted:"文件夹已删除",fileDeleted:"文件已删除",filesDeleted:"已删除 {{count}} 个文件",filesMoved:"文件已移动",folderLinked:"文件夹已链接",folderUnlinked:"文件夹已取消链接",externalFolderLinked:"外部文件夹已链接并扫描",folderScanned:"扫描完成：添加 {{added}} 个，移除 {{removed}} 个",addedToQueue:"已将 {{count}} 个文件添加到队列",addedToQueuePartial:"已添加 {{added}} 个文件，{{failed}} 个失败",failedToAddToQueue:"添加文件失败：{{error}}",fileRenamed:"文件已重命名",folderRenamed:"文件夹已重命名",thumbnailsGenerated:"已生成 {{count}} 个缩略图",thumbnailsGeneratedPartial:"已生成 {{succeeded}} 个缩略图，{{failed}} 个失败",noStlMissingThumbnails:"没有缺少缩略图的 STL 文件",failedToGenerateThumbnails:"生成缩略图失败：{{error}}",thumbnailGenerated:"缩略图已生成",failedToGenerateThumbnail:"生成缩略图失败：{{error}}"}},projects:{title:"项目",subtitle:"组织和跟踪您的 3D 打印项目",newProject:"新建项目",editProject:"编辑项目",deleteProject:"删除项目",projectName:"项目名称",description:"描述",noProjects:"暂无项目",noProjectsFiltered:"没有{{status}}项目",noProjectsFilteredHelp:"您没有任何{{status}}项目。当项目状态更改时，它们将出现在这里。",createFirst:"创建您的第一个项目以开始组织相关打印、跟踪进度和管理构建。",createFirstButton:"创建您的第一个项目",create:"创建",files:"文件",prints:"打印",plates:"板",parts:"零件",lastModified:"最后修改",deleteConfirm:"确定要删除此项目吗？归档和队列项目将被取消链接但不会被删除。",addFiles:"添加文件",removeFile:"移除文件",viewDetails:"查看详情",namePlaceholder:"例如：Voron 2.4 构建",descriptionPlaceholder:"可选描述...",urlLabel:"网址",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"网址必须以 http:// 或 https:// 开头",openExternalUrl:"打开项目网址",coverImageLabel:"封面图片",coverImageAlt:"项目封面图片",coverImageUpload:"上传",coverImageReplace:"替换",coverImageRemove:"移除",color:"颜色",targetPlates:"目标板数",targetPlatesPlaceholder:"例如：25",targetPlatesHelp:"打印任务数量",targetParts:"目标零件数",targetPartsPlaceholder:"例如：150",targetPartsHelp:"所需零件总数",tagsLabel:"标签（逗号分隔）",tagsPlaceholder:"例如：voron、功能件、礼物",dueDate:"截止日期",priority:"优先级",priorityLow:"低",priorityNormal:"普通",priorityHigh:"高",priorityUrgent:"紧急",statusActive:"进行中",statusCompleted:"已完成",statusArchived:"已归档",done:"完成",completed:"已完成",failed:"失败",inQueue:"队列中",noPrintsYet:"暂无打印",printJobs:"打印任务（板）",partsPrinted:"已打印零件",failedParts:"失败零件",import:"导入",export:"导出",importProject:"导入项目",exportAll:"导出所有项目",loading:"加载项目中...",noEditPermission:"您没有编辑项目的权限",noDeletePermission:"您没有删除项目的权限",noCreatePermission:"您没有创建项目的权限",noImportPermission:"您没有导入项目的权限",noExportPermission:"您没有导出项目的权限",toast:{created:"项目已创建",updated:"项目已更新",deleted:"项目已删除",imported:"项目已导入",multipleImported:"已导入 {{count}} 个项目",importFailed:"导入失败",exported:"项目已导出（仅元数据）"}},projectDetail:{notFound:"未找到项目",backToProjects:"返回项目",export:"导出",exportProject:"导出项目",noExportPermission:"您没有导出项目的权限",noEditPermission:"您没有编辑项目的权限",partOf:"属于：",priorityLabel:"优先级：",noPrints:"此项目暂无打印",status:{active:"进行中",completed:"已完成",archived:"已归档"},priority:{low:"低",normal:"普通",high:"高",urgent:"紧急"},dueDate:{overdue:"已逾期",today:"今天到期",daysLeft:"还有 {{count}} 天"},progress:{platesProgress:"板进度",partsProgress:"零件进度",printJobs:"打印任务",parts:"零件",percentComplete:"{{percent}}% 完成",remaining:"剩余 {{count}} 个"},stats:{printJobs:"打印任务",total:"总计",failed:"{{count}} 个失败",partsPrinted:"已打印 {{count}} 个零件",printTime:"打印时间",filamentUsed:"耗材用量"},cost:{title:"成本追踪",filamentCost:"耗材成本",energy:"能源",totalCost:"总成本",total:"总计",includesBom:"含物料清单",budget:"预算",remaining:"剩余"},subProjects:{title:"子项目 ({{count}})"},notes:{title:"备注",noEditPermission:"您没有编辑备注的权限",placeholder:"添加关于此项目的备注...",empty:"暂无备注。点击编辑添加备注。"},files:{title:"文件",linkFolders:"从文件管理器链接文件夹",forQuickAccess:"到此项目以便快速访问。",fileCount:"{{count}} 个文件",empty:"未链接文件夹。前往文件管理器将文件夹链接到此项目。",noFiles:"此文件夹中没有文件。",print:"立即打印",addToQueue:"加入队列"},bom:{title:"材料清单",acquired:"已获取 {{completed}}/{{total}}",showAll:"显示全部",hideDone:"隐藏已完成",addPart:"添加零件",noAddPermission:"您没有添加零件的权限",partNamePlaceholder:"零件名称（例如：M3x8 螺丝）",partName:"零件名称",qty:"数量",price:"价格 ({{currency}})",sourcingUrlPlaceholder:"采购链接（可选）",remarksPlaceholder:"备注（可选）",deletePart:"删除零件",deleteConfirm:'确定要删除"{{name}}"吗？',noUpdatePermission:"您没有更新零件的权限",noEditPermission:"您没有编辑零件的权限",noDeletePermission:"您没有删除零件的权限",totalCost:"总成本：",empty:"材料清单中没有零件。添加硬件、电子元件或其他组件以跟踪需要采购的物品。"},timeline:{title:"活动时间线",empty:"暂无活动。"},template:{saveAsTemplate:"保存为模板",noCreatePermission:"您没有创建模板的权限"},queue:{title:"队列",viewAll:"查看全部",printing:"{{count}} 个打印中",queued:"{{count}} 个排队中"},prints:{title:"打印 ({{count}})"},toast:{projectUpdated:"项目已更新",partAdded:"零件已添加",partRemoved:"零件已移除",exportFailed:"导出失败",projectExported:"项目已导出",templateCreated:"模板已创建"}},system:{title:"系统信息",version:"版本",uptime:"运行时间",cpuUsage:"CPU 使用率",memoryUsage:"内存使用率",diskUsage:"磁盘使用率",networkInfo:"网络信息",logs:"日志",debugMode:"调试模式",enableDebug:"启用调试日志",disableDebug:"禁用调试日志",downloadLogs:"下载日志",clearLogs:"清除日志",dockerInfo:"Docker 信息",containerName:"容器名称",imageName:"镜像名称",platform:"平台",architecture:"架构"},library:{title:"耗材库",addFilament:"添加耗材",editFilament:"编辑耗材",deleteFilament:"删除耗材",vendor:"厂商",material:"材料",color:"颜色",kFactor:"K 值",temperature:"温度",noFilaments:"耗材库中没有耗材",deleteConfirm:"确定要删除此耗材吗？",importFromPrinter:"从打印机导入",exportToFile:"导出到文件"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Spoolman 集成",enabled:"Spoolman 已启用",url:"Spoolman URL",connected:"已连接",disconnected:"未连接",testConnection:"测试连接",sync:"同步",syncing:"同步中...",lastSync:"上次同步",linkToSpoolman:"链接到 Spoolman",openInSpoolman:"在 Spoolman 中打开",unlinkSpool:"取消链接耗材",unlinkConfirmTitle:"解开线轴？",unlinkConfirmMessage:"这将断开卷轴与 Spoolman 的连接。Spoolman 中的卷轴数据将保持不变。",selectSpool:"选择耗材",noUnlinkedSpools:"无未链接的耗材",linkSuccess:"耗材已成功链接到 Spoolman",linkFailed:"链接耗材失败",unlinkSuccess:"已成功从 Spoolman 取消链接耗材",unlinkFailed:"取消链接耗材失败",spoolId:"耗材 ID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"剩余",disableWeightSync:"禁用 AMS 估计重量同步",disableWeightSyncDesc:"不从 AMS 估计值更新剩余容量。如果您更喜欢 Spoolman 的用量追踪而非 AMS 百分比估计，请使用此选项。新耗材仍将使用 AMS 估计值作为初始重量。",reportPartialUsage:"报告失败打印的部分用量",reportPartialUsageDesc:"当打印失败或被取消时，根据层进度报告估计的耗材使用量。"},inventory:{title:"耗材库存",spoolmanMixedContentTitle:"Spoolman 无法通过 HTTPS 加载 — 浏览器已阻止混合内容",spoolmanMixedContentBody:"Bambuddy 通过您的反向代理以 HTTPS 提供服务，但您的 Spoolman 地址仍为 HTTP。出于安全考虑，浏览器会阻止混合内容，因此嵌入式 Spoolman 界面无法加载。Spoolman 也必须通过 HTTPS 访问。",spoolmanMixedContentFixReverseProxy:"请将 Spoolman 置于与 Bambuddy 相同的反向代理（Traefik / Nginx / Caddy）之后并启用 HTTPS，然后在设置中将 Spoolman URL 更新为新的 HTTPS 地址。",spoolmanMixedContentFixOpenNewTab:"作为变通方案，可在新标签页中通过 HTTP 打开 Spoolman — 混合内容规则仅适用于嵌入式框架，独立标签页仍可正常使用。",spoolmanOpenInNewTab:"在新标签页中打开 Spoolman",addSpool:"添加耗材",editSpool:"编辑耗材",material:"材料",selectMaterial:"选择材料...",subtype:"子类型",brand:"品牌",searchBrand:"搜索品牌...",useCustomBrand:'使用"{{brand}}"',useCustomMaterial:"使用自定义材料：{{material}}",colorName:"颜色名称",colorNamePlaceholder:"翡翠白、烈焰红...",color:"颜色",hexColor:"十六进制颜色",pickColor:"选择自定义颜色",labelWeight:"标签重量",coreWeight:"空盘重量",searchSpoolWeight:"搜索耗材重量...",weightUsed:"已使用",currentWeight:"剩余重量",measuredWeight:"称量重量",spoolName:"线轴",costPerKg:"每公斤成本",measuredWeightError:"称量重量必须在 {{min}}g 到 {{max}}g 之间。",slicerFilament:"切片耗材",slicerFilamentName:"切片预设名称",slicerPreset:"切片预设",searchPresets:"搜索耗材预设...",selectedPreset:"已选择",noPresetsFound:"未找到预设",tempOverrides:"温度覆盖",note:"备注",notePlaceholder:"关于此耗材的任何备注...",category:"类别",categoryPlaceholder:"例如：生产、原型、客户A",categoryNone:"未分类",lowStockThresholdOverride:"低库存阈值（此料盘）",lowStockThresholdOverrideHelp:"留空以使用全局阈值（{{global}}%）。",clearRfid:"清除 RFID 标签",rfidCleared:"RFID 标签已清除",archive:"归档",restore:"恢复",noSpools:"暂无耗材。添加您的第一个耗材开始使用。",noAvailableSpools:"没有可用的耗材。请先向库存中添加耗材，或从其他槽位取消分配一个耗材。",kProfiles:"K 值配置",addKProfile:"添加 K 值配置",assignSpool:"分配耗材",unassignSpool:"取消分配",assignSuccess:"耗材已分配，AMS 槽位已配置",assignFailed:"分配耗材失败",assignMismatchTitle:"材料不匹配",assignMismatchMessage:'所选线轴材料 "{{spoolMaterial}}" 与 {{location}} 的料槽材料 "{{trayMaterial}}" 不匹配。仍要分配吗？',assignMismatchConfirm:"仍然分配",assignPartialMismatchMessage:'线轴材料 "{{spoolMaterial}}" 与 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否继续？',assignProfileMismatchMessage:'线轴配置 "{{spoolProfile}}" 与 {{location}} 的料槽配置 "{{trayProfile}}" 不一致。是否继续？',selectSpool:"选择要分配到此槽位的耗材",assigned:"已分配",assigning:"分配中...",searchSpools:"搜索耗材...",showAllSpools:"显示所有耗材",allMaterials:"所有材料",filterByBrand:"按品牌筛选...",showArchived:"显示已归档",quickAdd:"快速添加（库存）",quantity:"数量",stock:"库存",configured:"已配置",spoolsCreated:"已创建 {{count}} 个耗材",spoolCreated:"耗材已创建",spoolUpdated:"耗材已更新",spoolDeleted:"耗材已删除",spoolArchived:"耗材已归档",spoolRestored:"耗材已恢复",deleteConfirm:"确定要删除此耗材吗？此操作无法撤销。",archiveConfirm:"确定要归档此耗材吗？",advancedSettings:"高级设置",filamentInfoTab:"耗材信息",paProfileTab:"PA 配置",filamentInfo:"耗材",additional:"附加",loadingPresets:"加载云端预设中...",cloudConnected:"云端已连接",cloudNotConnected:"云端未连接（使用默认值）",recentColors:"最近",searchColors:"搜索颜色...",searchResults:"搜索结果",allColors:"所有颜色",commonColors:"常用颜色",showLess:"显示更少",showAll:"显示全部",noColorsFound:"没有颜色匹配您的搜索",noResults:"未找到匹配项",extraColorsLabel:"附加颜色",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"粘贴 2 到 8 个十六进制色值,以逗号分隔。将渲染为渐变。",extraColorsInvalid:"已忽略无效的十六进制值:{{tokens}}",colorEffectLabel:"效果",colorEffect:{none:"无",sparkle:"闪光",wood:"木纹",marble:"大理石",glow:"夜光",matte:"哑光",silk:"丝光",galaxy:"星空",rainbow:"彩虹",metal:"金属",translucent:"半透明",gradient:"渐变",dualColor:"双色",triColor:"三色",multicolor:"多色"},selectMaterialFirst:"请先在耗材信息选项卡中选择材料。",noPrintersConfigured:"未配置打印机。添加打印机以使用 PA 配置。",matchingFilter:"匹配",anyBrand:"任何品牌",anyVariant:"任何变体",autoSelect:"自动选择",matches:"匹配",match:"匹配",noMatches:"无匹配",connected:"已连接",offline:"离线",printerOffline:"打印机离线。连接后查看校准配置。",noKProfilesMatch:"没有 K 值配置匹配所选耗材。",leftNozzle:"左喷嘴",rightNozzle:"右喷嘴",profilesSelected:"个校准配置已选择",totalInventory:"总库存",totalConsumed:"总消耗",byMaterial:"按材料",inPrinter:"在打印机中",lowStock:"库存不足",sinceTracking:"自开始追踪",loadedInAms:"已装载到 AMS/外置",remaining:"剩余",weightCheck:"重量检查",lastWeighed:"上次称量",neverWeighed:"从未称量",search:"搜索耗材...",showing:"显示",to:"到",of:"共",show:"显示",spools:"个耗材",spool:"个耗材",page:"页",noSpoolsMatch:"未找到结果",noSpoolsMatchDesc:"尝试调整您的搜索或筛选条件。",active:"活跃",archived:"已归档",all:"全部",used:"已使用",new:"新的",clearFilters:"清除筛选",table:"表格",cards:"卡片",net:"净重",groupSimilar:"分组",groupedSpools:"{{count}} 个相同耗材",groupedRows:"行",columns:"列",configureColumns:"配置列",configureColumnsDesc:"拖动以重新排序列或使用箭头。使用眼睛图标切换可见性。",visible:"可见",reset:"重置",cancel:"取消",applyChanges:"应用更改",moveUp:"上移",moveDown:"下移",hideColumn:"隐藏列",showColumn:"显示列",linkToSpool:"链接到耗材",tagLinked:"标签已链接到耗材",tagLinkFailed:"链接标签失败",tagAlreadyLinked:"标签已链接到其他耗材",unknownTag:"检测到未知 RFID 标签",usageHistory:"使用历史",noUsageHistory:"暂无使用记录",printName:"打印名称",weightConsumed:"消耗重量",clearHistory:"清除",historyCleared:"使用历史已清除",fillSourceLabel:"(库存)",lowStockThresholdError:"阈值必须在 0.1 到 99.9 之间"},timelapse:{title:"延时摄影",create:"创建延时摄影",download:"下载",delete:"删除",preview:"预览",frameRate:"帧率",quality:"质量",processing:"处理中...",noTimelapses:"无可用延时摄影"},ams:{title:"AMS",slot:"槽位",empty:"空",emptySlot:"空槽位",unknown:"未知",humidity:"湿度",temperature:"温度",filamentType:"耗材类型",filamentColor:"颜色",remaining:"剩余",history:"AMS 历史",noHistory:"无可用历史",configureSlot:"配置槽位",externalSpool:"外置耗材",profile:"配置",kFactor:"K 值",fill:"填充",configure:"配置",used:"已使用",remainingUnit:"剩余"},printModal:{title:"开始打印",selectPrinter:"选择打印机",selectPlate:"选择板",filamentMapping:"耗材映射",totalCost:"总成本：",slotRemainingShort:" - 剩余 {{grams}}g",printSettings:"打印设置",bedLeveling:"热床调平",flowCalibration:"流量校准",vibrationCalibration:"振动校准",layerInspection:"首层检查",timelapse:"延时摄影",startPrint:"开始打印",addToQueue:"添加到队列",cancel:"取消",noPrintersAvailable:"无可用打印机",printerBusy:"打印机忙碌",printerOffline:"打印机离线",sameTypeDifferentColor:"相同类型，不同颜色",filamentTypeNotLoaded:"耗材类型未装载",openCalendar:"打开日历",leftNozzle:"左",rightNozzle:"右",leftNozzleTooltip:"左喷嘴",rightNozzleTooltip:"右喷嘴",filamentOverride:"耗材覆盖",filamentOverrideHint:"可选覆盖用于基于模型的耗材分配。调度器将使用您选择的耗材而不是原始 3MF 值进行匹配。",originalFilament:"原始",overrideWith:"覆盖为",resetToOriginal:"恢复为原始",insufficientFilamentTitle:"耗材不足",insufficientFilamentMessage:"部分已分配线轴的剩余耗材少于本次打印所需：",insufficientFilamentLine:"{{printer}} - {{slot}}：需要 {{required}}g，剩余 {{remaining}}g",printAnyway:"仍然打印",forceColorMatch:"强制颜色匹配",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"分批发送到 {{count}} 台打印机",gcodeInjection:"注入自动打印G-code"},backup:{title:"备份与恢复",createBackup:"创建备份",restoreBackup:"恢复备份",restoreDescription:"从备份文件替换所有数据",downloadBackup:"下载备份",uploadBackup:"上传备份",lastBackup:"上次备份",autoBackup:"自动备份",backupNow:"立即备份",restoreWarning:"警告：恢复备份将覆盖所有当前数据。",includeArchives:"包含归档",includeSettings:"包含设置",includeProfiles:"包含配置文件",backupSuccess:"备份创建成功",restoreSuccess:"备份恢复成功",backupFailed:"备份失败",restoreFailed:"恢复失败",restoreNote:"恢复期间虚拟打印机将停止",githubBackup:"GitHub 备份",enabled:"已启用",cloudLoginRequired:"需要登录 Bambu Cloud。请在 配置文件 → 云配置文件 中登录以启用 GitHub 备份。",cloudLoginRequiredShort:"需要Cloud登录",githubDescription:"自动将您的配置文件同步到私有 GitHub 仓库以进行备份和版本历史记录。",repositoryUrl:"仓库 URL",personalAccessToken:"个人访问令牌",tokenSaved:"（已保存）",enterNewToken:"输入新令牌以更新",tokenHint:"具有内容读写权限的细粒度令牌",branch:"分支",manualOnly:"仅手动",hourly:"每小时",daily:"每天",weekly:"每周",includeInBackup:"包含在备份中",kProfiles:"K 配置文件",kProfilesDescription:"来自已连接打印机的压力推进校准",noPrintersConnected:"没有打印机连接",printersConnected:"{{connected}}/{{total}} 已连接",cloudProfiles:"云配置文件",cloudProfilesDescription:"来自 Bambu Cloud 的耗材、打印机和工艺预设",appSettings:"应用设置",appSettingsDescription:"Bambuddy 配置（完整数据库）",spoolInventory:"耗材库存",spoolInventoryDescription:"耗材卷轴、使用记录和成本追踪",printArchives:"打印档案",printArchivesDescription:"打印历史元数据（不含 gcode/3MF 文件）",lastBackupAt:"上次备份：",noBackupsYet:"尚无备份",next:"下次：",startingBackup:"正在启动备份...",test:"测试",enableBackup:"启用备份",testConnection:"测试连接",enterRepoUrl:"请输入仓库 URL",enterRepoAndToken:"请输入仓库 URL 和访问令牌",repoRequired:"仓库 URL 为必填项",tokenRequired:"访问令牌为必填项",githubBackupEnabled:"GitHub 备份已启用",tokenUpdated:"令牌已更新",settingsSaved:"设置已保存",failedToSave:"保存失败：{{message}}",backupCompleteFiles:"备份完成 - {{count}} 个文件已更新",backupSkippedNoChanges:"备份已跳过 - 无更改",backupFailed2:"备份失败：{{message}}",clearedLogs:"已清除 {{count}} 条日志",failedToClearLogs:"清除日志失败：{{message}}",history:"历史记录",clear:"清除",date:"日期",status:"状态",commit:"提交",localBackup:"本地备份",localBackupDescription:"创建 Bambuddy 数据的完整备份，包括数据库、档案、上传和所有文件。",downloadBackupLabel:"下载备份",completeBackupZip:"完整备份：数据库 + 所有文件（ZIP）",download:"下载",preparingBackup:"正在准备备份...",creatingArchive:"正在创建备份归档...对于大型归档可能需要一些时间。",downloadingFile:"正在下载备份文件...",backupDownloaded:"备份下载成功",failedToCreateBackup:"创建备份失败：{{message}}",restore:"恢复",restoreReplacesAll:"恢复将替换所有数据。",restoreReplacesAllDetail:"您当前的数据库和文件将被完全替换。恢复后需要重启。",restoreConfirmTitle:"恢复备份",restoreConfirmMessage:'您确定要从"{{filename}}"恢复吗？这将完全替换您当前的数据库和所有文件。恢复后需要重启应用程序。',restoreConfirmButton:"恢复备份",uploadingFile:"正在上传备份文件...",backupRestoredRestart:"备份已恢复。请重启 Bambuddy。",failedToRestore:"恢复备份失败。请检查文件格式。",reloadNow:"立即重新加载",creatingBackup:"正在创建备份",restoringBackup:"正在恢复备份",preparing:"准备中...",processing:"处理中...",doNotClosePage:"请不要关闭此页面或导航离开。对于大型备份，此操作可能需要几分钟。",restoring:"恢复中...",restoreComplete:"恢复完成",restoreFailed2:"恢复失败",importSettings:"从备份文件导入设置",pleaseWaitRestoring:"请等待数据恢复中",selectBackupFile:"点击选择备份文件（.json 或 .zip）",duplicateHandling:"重复项处理方式：",matchPrinters:"打印机",matchPrintersBy:"按序列号匹配",matchSmartPlugs:"智能插座",matchSmartPlugsBy:"按 IP 地址匹配",matchNotificationProviders:"通知提供者",matchNotificationProvidersBy:"按名称匹配",matchFilaments:"耗材",matchFilamentsBy:"按名称 + 类型 + 品牌匹配",matchArchives:"档案",matchArchivesBy:"按内容哈希匹配（始终跳过）",matchPendingUploads:"待上传",matchPendingUploadsBy:"按文件名匹配",matchSettingsTemplates:"设置和模板",matchSettingsTemplatesBy:"始终覆盖",replaceExisting:"替换现有数据",keepExisting:"保留现有数据",overwriteDescription:"用备份数据覆盖已存在的项目",keepDescription:"仅恢复尚不存在的项目",overwriteCaution:"注意：",overwriteWarning:"覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问代码永远不会被覆盖。",cancel:"取消",processingBackup:"正在处理备份文件...",itemsRestored:"已恢复项目",itemsSkipped:"已跳过项目",restored:"已恢复",skippedAlreadyExist:"已跳过（已存在）",filesCategory:"文件（3MF、缩略图等）",andMore:"...还有 {{count}} 项",newApiKeysGenerated:"已生成新的 API 密钥",keysShownOnce:"这些密钥仅显示一次。请立即复制！",copy:"复制",noDataFound:"在备份文件中未找到可恢复的数据。",close:"关闭",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"设置",notification_providers:"通知提供者",notification_templates:"通知模板",smart_plugs:"智能插座",printers:"打印机",filaments:"耗材",maintenance_types:"维护类型",archives:"档案",projects:"项目",pending_uploads:"待上传",external_links:"外部链接",api_keys:"API 密钥"}},tags:{title:"标签",addTag:"添加标签",editTag:"编辑标签",deleteTag:"删除标签",tagName:"标签名称",tagColor:"标签颜色",noTags:"无标签",deleteConfirm:"确定要删除此标签吗？",manageTags:"管理标签"},uploadModal:{title:"上传 3MF 文件",dragDrop:"将 .3mf 文件拖放到此处",or:"或",browseFiles:"浏览文件",extractionInfo:"将从 3MF 文件元数据中自动提取打印机型号。",uploaded:"已上传",failed:"失败",uploading:"上传中...",upload:"上传",uploadFailed:"上传失败"},editArchive:{title:"编辑归档",name:"名称",namePlaceholder:"打印名称",printer:"打印机",noPrinter:"无打印机",project:"项目",noProject:"无项目",itemsPrinted:"打印数量",itemsPrintedHelp:"此打印任务中生产的物品数量",notes:"备注",notesPlaceholder:"添加关于此打印的备注...",externalLink:"外部链接",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"链接到 Printables、Thingiverse 或其他来源",tags:"标签",tagsPlaceholder:"添加标签...",addMoreTags:"添加更多标签...",matchingTags:'匹配"{{query}}"',existingTags:"现有标签",clickToAdd:"（点击添加）",status:"状态",failureReason:"失败原因",selectReason:"选择原因...",photos:"打印成品照片",photosHelp:"点击 + 添加打印成品照片",printResult:"打印成品",saving:"保存中...",failureReasons:{adhesionFailure:"附着力失败",spaghettiDetached:"拉丝 / 脱落",layerShift:"层偏移",cloggedNozzle:"喷嘴堵塞",filamentRunout:"耗材用完",warping:"翘曲",stringing:"拉丝",underExtrusion:"挤出不足",powerFailure:"断电",userCancelled:"用户取消",other:"其他"},statuses:{completed:"已完成",failed:"失败",aborted:"已取消",printing:"打印中"}},kProfiles:{title:"K 值配置",noPrintersConfigured:"未配置打印机",addPrinterInSettings:"在设置中添加打印机以管理 K 值配置",noActivePrinters:"无活跃打印机",enablePrinterConnection:"启用打印机连接以查看其 K 值配置",loadingProfiles:"加载 K 值配置中...",printerOffline:"打印机离线",printerOfflineDesc:"所选打印机未连接。开启电源以查看 K 值配置。",noMatchingProfiles:"无匹配的配置",noMatchingProfilesDesc:"没有配置匹配您的搜索条件",noKProfiles:"无 K 值配置",noKProfilesDesc:"未找到 {{diameter}}mm 喷嘴的压力推进配置",createFirstProfile:"创建第一个配置",printer:"打印机",nozzle:"喷嘴",refresh:"刷新",addProfile:"添加配置",export:"导出",import:"导入",select:"选择",selectAll:"全选",delete:"删除",searchPlaceholder:"按名称或耗材搜索...",allExtruders:"所有挤出机",leftOnly:"仅左侧",rightOnly:"仅右侧",allFlow:"所有流量",hfOnly:"仅高流量",sOnly:"仅标准",sortName:"排序：名称",sortKValue:"排序：K 值",sortFilament:"排序：耗材",leftExtruder:"左挤出机",rightExtruder:"右挤出机",modal:{addTitle:"添加 K 值配置",editTitle:"编辑 K 值配置",profileName:"配置名称",profileNamePlaceholder:"我的 PLA 配置",kValue:"K 值",kValuePlaceholder:"0.020",kValueHelp:"典型范围：PLA 0.01 - 0.06，PETG 0.02 - 0.10",filament:"耗材",selectFilament:"选择耗材...",noFilamentsHelp:"未找到耗材。请先在 Bambu Studio 中创建 K 值配置。",flowType:"流量类型",highFlow:"高流量",standard:"标准",nozzleSize:"喷嘴尺寸",extruder:"挤出机",extruders:"挤出机",left:"左",right:"右",notes:"备注（本地存储）",notesPlaceholder:"添加关于此配置的备注...",notesHelp:"备注保存在 Bambuddy 中，不在打印机上",syncing:"与打印机同步中...",savingExtruder:"保存到挤出机 {{current}}/{{total}}...",pleaseWait:"请稍候"},deleteConfirm:{title:"删除配置",cannotUndo:"此操作无法撤销",message:'确定要从打印机删除"{{name}}"吗？'},bulkDelete:{title:"删除配置",cannotUndo:"此操作无法撤销",message:"确定要从打印机删除 {{count}} 个选中的配置吗？"},toast:{profileSaved:"K 值配置已保存",profilesSaved:"K 值配置已保存到 {{count}} 个挤出机",selectAtLeastOneExtruder:"请至少选择一个挤出机",profileDeleted:"K 值配置已删除",profilesDeleted:"已删除 {{count}} 个配置",exportedProfiles:"已导出 {{count}} 个配置",importedProfiles:"已导入 {{count}} / {{total}} 个配置",noProfilesToExport:"无可导出的配置",invalidFileFormat:"无效的文件格式",failedToParseImport:"解析导入文件失败",failedToSaveBatch:"批量保存 K 值配置失败",noteSaved:"备注已保存",failedToSaveNote:"保存备注失败"},permission:{noRead:"您没有刷新配置的权限",noCreate:"您没有添加配置的权限",noUpdate:"您没有更新 K 值配置的权限",noDelete:"您没有删除 K 值配置的权限",noExport:"您没有导出配置的权限",noImport:"您没有导入配置的权限"}},virtualPrinter:{title:"虚拟打印机",running:"运行中",stopped:"已停止",description:{default:"启用虚拟打印机，使其在 Bambu Studio 和 OrcaSlicer 中可见。发送到此打印机的文件将直接归档而不打印。",proxy:"启用代理，将切片软件流量中继到真实打印机，允许在任何网络上远程打印。"},enable:{title:"启用虚拟打印机",visibleInSlicer:'在切片软件发现中显示为"Bambuddy"',proxyingTo:"代理到 {{name}}",notActive:"未激活"},model:{title:"打印机型号",description:"选择要模拟的打印机型号。",restartWarning:"更改型号将重启虚拟打印机"},accessCode:{title:"访问码",isSet:"访问码已设置",notSet:"未设置访问码 - 需要设置才能启用",placeholder:"输入 8 位字符代码",placeholderChange:"输入新代码以更改",hint:"必须恰好 8 个字符。切片软件使用此代码进行认证。",charCount:"({{count}}/8)"},targetPrinter:{title:"目标打印机",configured:"代理目标已配置",notConfigured:"未选择目标打印机 - 代理模式需要设置",placeholder:"选择打印机...",hint:"选择要将切片软件流量代理到的打印机。打印机必须处于局域网模式。",noPrinters:"未配置打印机。请先添加打印机以使用代理模式。"},remoteInterface:{title:"网络接口覆盖",configured:"接口覆盖已激活",optional:"可选 - 当自动检测的 IP 不正确时使用（例如多网卡、Docker、VPN）",placeholder:"自动检测（默认）...",hint:"覆盖通过 SSDP 广播并在 TLS 证书中使用的 IP 地址。在 Bambuddy 有多个网络接口时很有用。"},mode:{title:"模式",archive:"归档",archiveDesc:"立即归档文件",review:"审核",reviewDesc:"归档前审核",queue:"队列",queueDesc:"归档并添加到队列",proxy:"代理",proxyDesc:"中继到真实打印机"},autoDispatch:{title:"自动派发",description:"添加到队列时自动开始打印。关闭后，打印任务等待手动派发。"},tailscaleDisabled:{title:"Tailscale 集成",description:"启用后，使用 Tailscale 获取受信任的 TLS 证书。禁用则仅使用自签名证书。"},setupRequired:{title:"需要设置",description:"虚拟打印机功能需要额外的系统配置才能工作。包括端口转发、防火墙规则和平台特定设置。",readGuide:"启用前请阅读设置指南"},archiveNameSource:{title:"存档名称来源",description:'选择通过虚拟打印机接收文件时新存档的命名方式。"元数据"使用 3MF 中嵌入的切片标题（默认）。"文件名"使用 Bambu Studio 通过 FTP 发送的文件名 — 当您在"发送到打印机"对话框中重命名作业时非常有用。',metadata:"元数据",filename:"文件名"},howItWorks:{title:"工作原理",step1:"在同一局域网中，虚拟打印机会通过发现机制自动出现在您的切片软件（Bambu Studio / OrcaSlicer）中。从其他网络，通过 IP 地址和访问码手动添加。",step2:'在归档、审核和队列模式下，使用切片软件中的"发送"按钮将 3MF 文件上传到 Bambuddy。切片软件会显示"打印成功"— 文件已存储，未打印。',step3:"在代理模式下，虚拟打印机将所有流量中继到真实打印机 — 打印会立即开始，就像直接连接一样。"},status:{title:"状态详情",printerName:"打印机名称",model:"型号",serialNumber:"序列号",mode:"模式",pendingFiles:"待处理文件",targetPrinter:"目标打印机",ftpPort:"FTP 端口",mqttPort:"MQTT 端口",ftpConnections:"FTP 连接",mqttConnections:"MQTT 连接"},toast:{updated:"虚拟打印机设置已更新",failedToUpdate:"更新设置失败",tailscaleNotAvailable:"此主机上未安装 Tailscale。请先安装 Tailscale，然后重试。",copyFailed:"复制失败 — 请手动选中文本",accessCodeRequired:"请先设置访问码",targetPrinterRequired:"请先选择目标打印机",bindIpRequired:"请先设置绑定 IP",accessCodeEmpty:"访问码不能为空",accessCodeLength:"访问码必须恰好 8 个字符",created:"虚拟打印机已创建",failedToCreate:"创建虚拟打印机失败",deleted:"虚拟打印机已删除",failedToDelete:"删除虚拟打印机失败"},list:{title:"虚拟打印机",add:"添加",addFirst:"添加虚拟打印机",empty:"未配置虚拟打印机。添加一个以开始使用。"},bindIp:{title:"绑定接口",placeholder:"选择接口...",hint:"此虚拟打印机绑定的网络接口。每台打印机必须唯一。"},proxy:{accessCodeHint:"在代理模式下，在切片软件中使用目标打印机的访问码。连接会透明转发到真实打印机。"},addDialog:{title:"添加虚拟打印机",name:"名称",hint:"创建后可以配置访问码、目标打印机和其他设置。",create:"创建"},deleteConfirm:{title:"删除虚拟打印机",message:'确定要删除"{{name}}"吗？这将停止此打印机的所有服务。'}},modelViewer:{openInSlicer:"在切片软件中打开",tabs:{model:"3D 模型",gcode:"G-code 预览"},notAvailable:"不可用",notSliced:"未切片",plates:"板",allPlates:"所有板",plateNumber:"板 {{number}}",plateCount:"{{count}} 个板",plateCount_other:"{{count}} 个板",objectCount:"{{count}} 个对象",objectCount_other:"{{count}} 个对象",filamentCount:"{{count}} 种耗材",filamentCount_other:"{{count}} 种耗材",eta:"预计 {{minutes}} 分钟",noPreview:"此文件无可用预览",pagination:{pageOf:"第 {{current}} / {{total}} 页",prev:"上一页",next:"下一页"},errors:{failedToLoad:"加载文件失败",noMeshes:"3MF 文件中未找到网格",unsupportedFormat:"不支持的文件格式"}},maintenanceDescriptions:{lubricateCarbonRods:"在碳纤维杆上涂抹润滑剂以确保顺畅运动",lubricateRails:"在线性导轨上涂抹润滑剂以确保顺畅运动",cleanNozzle:"清洁热端和喷嘴以防止堵塞",checkBelts:"检查皮带张力以确保打印精度",cleanBuildPlate:"清洁构建板以获得更好的附着力",checkExtruder:"检查挤出机齿轮磨损情况",checkCooling:"确保冷却风扇正常工作",generalInspection:"打印机综合检查",cleanCarbonRods:"清洁碳纤维杆以减少摩擦",lubricateSteelRods:"在钢杆上涂抹润滑剂以确保顺畅运动",cleanSteelRods:"清洁钢杆以减少摩擦",cleanLinearRails:"擦拭线性导轨以清除灰尘和碎屑",checkPtfeTube:"检查 PTFE 管的磨损或损坏",replaceHepaFilter:"更换 HEPA 过滤器以保证空气质量",replaceCarbonFilter:"更换活性炭过滤器",lubricateLeftNozzleRail:"润滑左喷嘴导轨（H2 系列）"},smartPlugs:{offline:"离线",admin:"管理",openPlugAdminPage:"打开插座管理页面",deleteSmartPlug:"删除智能插座",turnOnSmartPlug:"开启智能插座",turnOffSmartPlug:"关闭智能插座",turnOn:"开启",turnOff:"关闭",addSmartPlug:{scanningNetwork:"扫描网络中...",chooseEntity:"选择实体...",connectionFailed:"连接失败",searchEntities:"搜索实体...",searchPowerSensors:"搜索功率传感器...",searchEnergySensors:"搜索能量传感器...",placeholders:{plugName:"客厅插座",mqttStateOnValue:"ON、true、1",mqttSameAsPower:"与功率主题相同，或不同"}},linkedTo:"关联到：",monitorOnly:"仅监控",alerts:"警报",scheduleOn:"开启 {{time}}",scheduleOff:"关闭 {{time}}",on:"开启",off:"关闭",power:"功率",kwhToday:"今日kWh",settings:"设置",automationSettings:"自动化设置",showInSwitchbar:"在开关栏显示",quickAccessSidebar:"从侧边栏快速访问",enabled:"已启用",enableAutomation:"为此插座启用自动化",autoOn:"自动开启",autoOnDescription:"打印开始时开启",autoOff:"自动关闭",autoOffDescription:"打印完成时关闭（一次性）",autoOffPersistent:"保持启用",autoOffPersistentDescription:"在打印之间保持启用而非一次性",turnOffDelayMode:"关闭延迟模式",time:"时间",temp:"温度",delayMinutes:"延迟（分钟）",tempThreshold:"温度阈值（°C）",tempThresholdDescription:"当喷嘴冷却到此温度以下时关闭",edit:"编辑",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',turnOnConfirm:'确定要开启"{{name}}"吗？',turnOffConfirm:'确定要关闭"{{name}}"吗？这将切断连接设备的电源。',failedToTurn:'无法{{action}}"{{name}}"',unknown:"未知",addTitle:"添加智能插座",editTitle:"编辑智能插座",stopScanning:"停止扫描",discoverTasmota:"发现Tasmota设备",foundDevices:"找到{{count}}个设备 - 点击选择：",noDevicesFound:"未在您的网络中找到Tasmota设备",haNotConfigured:"Home Assistant未配置。请在以下位置设置",haSettingsPath:"设置 → 网络 → Home Assistant",selectEntity:"选择实体 *",ipAddress:"IP地址 *",nameLabel:"名称 *",username:"用户名",password:"密码",authHint:"如果您的Tasmota设备不需要认证，请留空",linkToPrinter:"关联打印机",noPrinter:"无打印机（仅手动控制）",linkingDescription:"关联后可在打印开始/完成时自动开关",powerAlerts:"功率警报",alertAbove:"高于时警报（W）",alertBelow:"低于时警报（W）",alertDescription:"当电力消耗超过这些阈值时收到通知。留空以禁用该方向。",dailySchedule:"每日计划",turnOnAt:"开启时间",turnOffAt:"关闭时间",scheduleDescription:"每天在这些时间自动开关插座。留空以跳过该操作。",showOnPrinterCard:"在打印机卡片上显示",displayOnPrinterCard:"在打印机卡片上显示按钮",connectedResult:"已连接！",deviceLabel:"设备：{{name}} - ",stateLabel:"状态：{{state}}",test:"测试",delete:"删除",save:"保存",add:"添加",cancel:"取消",failedToStartScan:"无法开始扫描",nameRequired:"名称为必填项",entityRequired:"Home Assistant插座需要实体",mqttTopicRequired:"必须为功率、能源或状态监控配置至少一个MQTT主题",loadingEntities:"正在加载实体...",loading:"加载中...",failedToLoadEntities:"加载实体失败：{{error}}",noEntitiesMatching:'未找到匹配"{{search}}"的实体',noEntitiesAvailable:"无可用实体",searchingEntities:"搜索所有实体（找到{{count}}个）",showingEntities:"显示 switch、light、input_boolean（{{count}}个可用）",energyMonitoringOptional:"能源监控（可选）",energyMonitoringHint:"搜索并选择提供功率/能源数据的传感器。",powerSensorW:"功率传感器（W）",energyTodayKwh:"今日能源（kWh）",totalEnergyKwh:"总能源（kWh）",noMatchingSensors:"无匹配的传感器",none:"无",mqttNotConfigured:"MQTT代理未配置。请在以下位置设置代理地址",mqttSettingsPath:"设置 → 网络 → MQTT发布",mqttNotConfiguredSuffix:"（您不需要启用发布，只需填写代理详细信息）。",mqttMonitorOnlyDescription:"MQTT插座通过MQTT订阅接收功率/能源数据。开关控制不可用 - 请使用您的MQTT代理或家庭自动化系统。",powerMonitoring:"功率监控",energyMonitoring:"能源监控",stateMonitoring:"状态监控",optional:"可选",topic:"主题",jsonPath:"JSON路径",multiplier:"乘数",onValue:"ON值",mqttPowerHint:`JSON路径从JSON负载中提取值（例如"power_l1"）。如果主题发布原始数值，请留空。
+Valor ON: a string exata que significa "ON". Deixe vazio para detecção automática (ON, true, 1).`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"URL de potência",restPowerPath:"Power JSON Path",restPowerMultiplier:"Multiplicador de potência",restEnergyUrl:"URL de energia",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"Multiplicador de energia",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"URL separada para dados de potência (usa a URL de status se vazio)",restEnergyUrlHint:"URL separada para dados de energia (usa a URL de status se vazio)",restEnergyHint:"Cada valor pode usar sua própria URL ou recorrer à URL de status. Use multiplicadores para conversão de unidades (ex: 0.001 para converter Wh em kWh).",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"Nenhum interruptor na barra",enableSwitchbarHint:'Ative "Mostrar na barra de interruptores" em Configurações > Smart Plugs'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"E-mail",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"Notificações por e-mail SMTP",telegram:"Notificações via bot do Telegram",discord:"Enviar para canal do Discord via webhook",ntfy:"Notificações push gratuitas e auto-hospedáveis",pushover:"Notificações push simples e confiáveis",callmebot:"Notificações gratuitas via WhatsApp pelo CallMeBot",webhook:"POST HTTP genérico para qualquer URL",homeassistant:"Notificações persistentes no painel do Home Assistant"},lastSuccess:"Último: {{date}}",error:"Erro",printer:"Impressora:",allPrinters:"Todas as impressoras",sendTestNotification:"Enviar Notificação de Teste",eventSettings:"Configurações de Eventos",enabled:"Ativado",sendFromProvider:"Enviar notificações deste provedor",printEvents:"Eventos de Impressão",printerStatus:"Status da Impressora",amsAlarms:"Alarmes do AMS",amsHtAlarms:"Alarmes do AMS-HT",printQueue:"Fila de Impressão",start:"Início",plateCheck:"Verificação da Mesa",complete:"Concluído",failed:"Falhou",stopped:"Parado",progress:"Progresso",offline:"Offline",lowFilament:"Filamento Baixo",maintenance:"Manutenção",amsHumidity:"Umidade do AMS",amsTemp:"Temp. do AMS",amsHtHumidity:"Umidade do AMS-HT",amsHtTemp:"Temp. do AMS-HT",bedCooled:"Mesa Resfriada",firstLayer:"Primeira camada",quiet:"Silencioso",digest:"Resumo {{time}}",printStarted:"Impressão Iniciada",plateNotEmpty:"Mesa Não Vazia",plateNotEmptyDescription:"Objetos detectados antes da impressão",printCompleted:"Impressão Concluída",bedCooledLabel:"Mesa Resfriada",bedCooledDescription:"Mesa resfriou abaixo do limite após a impressão",firstLayerCompleteLabel:"Primeira camada concluída",firstLayerCompleteDescription:"Notificar com foto quando a primeira camada terminar",missingSpoolAssignmentLabel:"Atribuição de bobina ausente",missingSpoolAssignmentDescription:"Notificar quando a impressão iniciar e bandejas necessárias não tiverem bobina atribuída",printFailed:"Impressão Falhou",printStopped:"Impressão Parada",progressMilestones:"Marcos de Progresso",progressMilestonesDescription:"Notificar em 25%, 50%, 75%",printerOffline:"Impressora Offline",printerError:"Erro da Impressora",lowFilamentLabel:"Filamento Baixo",maintenanceDue:"Manutenção Necessária",maintenanceDueDescription:"Notificar quando manutenção for necessária",amsHumidityHigh:"Umidade Alta do AMS",amsHumidityHighDescription:"Umidade do AMS regular excede o limite",amsTemperatureHigh:"Temperatura Alta do AMS",amsTemperatureHighDescription:"Temperatura do AMS regular excede o limite",amsHtHumidityHigh:"Umidade Alta do AMS-HT",amsHtHumidityHighDescription:"Umidade do AMS-HT excede o limite",amsHtTemperatureHigh:"Temperatura Alta do AMS-HT",amsHtTemperatureHighDescription:"Temperatura do AMS-HT excede o limite",jobAdded:"Trabalho Adicionado",jobAddedDescription:"Trabalho adicionado à fila",jobAssigned:"Trabalho Atribuído",jobAssignedDescription:"Trabalho baseado em modelo atribuído à impressora",jobStarted:"Trabalho Iniciado",jobStartedDescription:"Trabalho da fila começou a imprimir",jobWaiting:"Trabalho Aguardando",jobWaitingDescription:"Trabalho aguardando filamento ou impressora",jobSkipped:"Trabalho Pulado",jobSkippedDescription:"Trabalho pulado (anterior falhou)",jobFailed:"Trabalho Falhou",jobFailedDescription:"Trabalho falhou ao iniciar",queueComplete:"Fila Concluída",queueCompleteDescription:"Todos os trabalhos da fila finalizados",quietHours:"Horário de Silêncio",noNotificationsDuring:"Sem notificações durante essas horas",editProviderToChangeQuietHours:"Edite o provedor para alterar o horário de silêncio",dailyDigest:"Resumo Diário",batchNotifications:"Agrupar notificações em um único resumo diário",sendAt:"Enviar às {{time}}",editProviderToChangeDigestTime:"Edite o provedor para alterar o horário do resumo",edit:"Editar",deleteProvider:"Excluir Provedor de Notificação",deleteConfirm:'Tem certeza que deseja excluir "{{name}}"? Isso não pode ser desfeito.',delete:"Excluir",addTitle:"Adicionar Provedor de Notificação",editTitle:"Editar Provedor de Notificação",nameLabel:"Nome *",namePlaceholder:"Minhas Notificações",providerTypeLabel:"Tipo de Provedor *",configuration:"Configuração",testConfiguration:"Testar Configuração",printerFilter:"Filtro de Impressora",onlyFromPrinter:"Enviar notificações apenas para eventos desta impressora",quietHoursDnd:"Horário de Silêncio (Não Perturbe)",quietStart:"Início",quietEnd:"Fim",dailyDigestLabel:"Resumo Diário",sendDigestAt:"Enviar resumo às",digestCollected:"Os eventos serão coletados e enviados como um único resumo neste horário",notificationEvents:"Eventos de Notificação",progressPercent:"(25%, 50%, 75%)",bedCooledAfterPrint:"(após conclusão da impressão)",eventPriority:{sectionTitle:"Prioridade ntfy",helpNtfy:"Escolha uma prioridade para cada evento habilitado. O ntfy usa isso para escalar alertas (som, visibilidade, comportamento push). Níveis não definidos aqui usam o padrão do servidor ntfy.",min:"Mín",low:"Baixa",default:"Padrão",high:"Alta",urgent:"Urgente"},cancel:"Cancelar",save:"Salvar",add:"Adicionar",nameRequired:"Nome é obrigatório",fieldRequired:"{{field}} é obrigatório",phoneNumber:"Número de Telefone",apiKey:"Chave da API",serverUrl:"URL do Servidor",topic:"Tópico",authToken:"Token de Autenticação",userKey:"Chave do Usuário",appToken:"Token do Aplicativo",priority:"Prioridade",botToken:"Token do Bot",chatId:"ID do Chat",smtpServer:"Servidor SMTP",smtpPort:"Porta SMTP",security:"Segurança",authentication:"Autenticação",username:"Usuário",password:"Senha",fromEmail:"E-mail de Origem",toEmail:"E-mail de Destino",webhookUrl:"URL do Webhook",payloadFormat:"Formato do Payload",authorization:"Autorização",titleFieldName:"Nome do Campo de Título",messageFieldName:"Nome do Campo de Mensagem",editTemplate:"Editar Modelo: {{name}}",titleLabel:"Título",bodyLabel:"Corpo",titlePlaceholder:"Título da notificação...",bodyPlaceholder:"Corpo da notificação...",availableVariables:"Variáveis Disponíveis",clickToInsert:"Clique para inserir na posição do cursor no corpo",livePreview:"Pré-visualização ao Vivo",hide:"Ocultar",show:"Mostrar",loadingPreview:"Carregando pré-visualização...",enterTemplateContent:"Insira o conteúdo do modelo para ver a pré-visualização",titlePreview:"Título:",bodyPreview:"Corpo:",resetToDefault:"Restaurar Padrão",titleRequired:"Título é obrigatório",bodyRequired:"Corpo é obrigatório",notificationLog:"Registro de Notificações",showFailedOnly:"Apenas falhas",last24Hours:"Últimas 24 horas",last7Days:"Últimos 7 dias",last30Days:"Últimos 30 dias",last90Days:"Últimos 90 dias",justNow:"Agora mesmo",noFailedNotifications:"Nenhuma notificação com falha",noNotificationsLogged:"Nenhuma notificação registrada",unknownProvider:"Provedor Desconhecido",logTitle:"Título",logMessage:"Mensagem",logError:"Erro",logProvider:"Provedor: {{type}}",logTime:"Hora: {{time}}",refresh:"Atualizar",clearOld:"Limpar Antigos",statsSummary:"Últimos {{days}} dias:",statsNotifications:"notificações",statsSent:"{{count}} enviadas",statsFailed:"{{count}} com falha",eventTypes:{print_start:"Impressão Iniciada",print_complete:"Impressão Concluída",print_failed:"Impressão Falhou",print_stopped:"Impressão Parada",print_progress:"Progresso",printer_offline:"Impressora Offline",printer_error:"Erro da Impressora",filament_low:"Filamento Baixo",maintenance_due:"Manutenção Necessária",test:"Teste"},userEmail:{title:"Notificações",emailNotifications:"Notificações por E-mail",emailNotificationsDesc:"Receba notificações por e-mail para seus próprios trabalhos de impressão. Os e-mails são enviados usando as configurações SMTP definidas na Autenticação Avançada.",sendingTo:"As notificações serão enviadas para",noEmailWarning:"Sua conta não tem um endereço de e-mail. Entre em contato com um administrador para adicionar um.",printJobNotifications:"Notificações de Trabalhos de Impressão",printJobNotificationsDesc:"Escolha quais eventos acionam notificações por e-mail para os trabalhos de impressão que você envia.",printJobStarts:"Início do Trabalho de Impressão",printJobStartsDesc:"Ser notificado quando seu trabalho de impressão começar.",printJobFinishes:"Conclusão do Trabalho de Impressão",printJobFinishesDesc:"Ser notificado quando seu trabalho de impressão concluir com sucesso.",printErrors:"Erros de Impressão",printErrorsDesc:"Ser notificado quando seu trabalho de impressão falhar ou encontrar um erro.",printJobStops:"Trabalho de Impressão Parado",printJobStopsDesc:"Ser notificado quando seu trabalho de impressão for cancelado ou parado.",saveSuccess:"Preferências de notificação salvas.",saveError:"Falha ao salvar preferências de notificação."}},richTextEditor:{bold:"Negrito",italic:"Itálico",underline:"Sublinhado",bulletList:"Lista com marcadores",numberedList:"Lista numerada",alignLeft:"Alinhar à esquerda",alignCenter:"Centralizar",alignRight:"Alinhar à direita",addLink:"Adicionar link",removeLink:"Remover link"},externalLinks:{noLinksConfigured:"Nenhum link externo configurado",deleteLink:"Excluir link",removeCustomIcon:"Remover ícone personalizado",openInNewTab:"Abrir em nova aba",placeholders:{linkName:"Meu Link"}},keyboardShortcuts:{title:"Atalhos de Teclado",navigation:"Navegação",archivesSection:"Arquivos",kProfilesSection:"K-Profiles",generalSection:"Geral",shortcuts:{goToPrinters:"Ir para Impressoras",goToArchives:"Ir para Arquivos",goToQueue:"Ir para Fila",goToStats:"Ir para Estatísticas",goToProfiles:"Ir para Perfis na Nuvem",goToSettings:"Ir para Configurações",focusSearch:"Focar na pesquisa",openUploadModal:"Abrir modal de upload",clearSelection:"Limpar seleção / desfocar input",contextMenu:"Menu de contexto nos cartões",refreshProfiles:"Atualizar perfis",newProfile:"Novo perfil",exitSelectionMode:"Sair do modo de seleção",showHelp:"Mostrar esta ajuda"},footer:"Pressione Esc ou clique fora para fechar"},notificationLog:{title:"Registro de Notificações",events:{printStarted:"Impressão Iniciada",printComplete:"Impressão Concluída",printFailed:"Impressão Falhou",printStopped:"Impressão Interrompida",progress:"Progresso",printerOffline:"Impressora Offline",printerError:"Erro na Impressora",lowFilament:"Filamento Baixo",maintenanceDue:"Manutenção Pendente",test:"Teste"},timeAgo:{justNow:"Agora mesmo",minutesAgo:"há {{minutes}} minutos",hoursAgo:"há {{hours}} horas"}},restoreBackup:{title:"Restaurar Backup",restoring:"Restaurando...",restoreComplete:"Restauração Concluída",restoreFailed:"Falha na Restauração",importSettings:"Importar configurações de um arquivo de backup",pleaseWait:"Aguarde enquanto seus dados estão sendo restaurados",clickToSelect:"Clique para selecionar o arquivo de backup (.json ou .zip)",howDuplicateHandling:"Como funciona o tratamento de duplicatas:",categories:{printers:"Impressoras",smartPlugs:"Tomadas Inteligentes",notificationProviders:"Provedores de Notificação",filaments:"Filamentos",archives:"Arquivos",pendingUploads:"Uploads Pendentes",settingsTemplates:"Configurações e Modelos"},matchingInfo:{printers:"correspondem pelo número de série",smartPlugs:"correspondem pelo endereço IP",notificationProviders:"correspondem pelo nome",filaments:"correspondem pelo nome + tipo + marca",archives:"correspondem pelo hash do conteúdo",pendingUploads:"correspondem pelo nome do arquivo",settingsTemplates:"sempre sobrescrito"},replaceExisting:"Substituir dados existentes",keepExisting:"Manter dados existentes",replaceDescription:"Substituir itens que já existem com os dados do backup",keepDescription:"Restaurar apenas itens que não existem",caution:"Atenção:",cautionText:"Sobrescrever substituirá suas configurações atuais pelos dados do backup. Os códigos de acesso da impressora nunca são sobrescritos por segurança.",itemsRestored:"Itens Restaurados",itemsSkipped:"Itens Ignorados",restored:"Restaurado",skipped:"Ignorado (já existe)",filesLabel:"Arquivos (3MF, miniaturas, etc.)",newApiKeysGenerated:"Novas Chaves API Geradas",newApiKeysWarning:"Essas chaves são exibidas apenas uma vez. Copie-as agora!",processingBackup:"Processando arquivo de backup...",noDataFound:"Nenhum dado foi encontrado para restaurar no arquivo de backup.",failedToRestore:"Falha ao restaurar o backup. Verifique o formato do arquivo."},backupExport:{title:"Exportar Backup",selectData:"Selecione os dados a incluir",selectAll:"Selecionar Todos",selectNone:"Selecionar Nenhum",categoryDescriptions:{settings:"Idioma, tema, preferências de atualização",notifications:"ntfy, Pushover, Discord, etc.",templates:"Modelos de mensagens personalizadas",smartPlugs:"Configurações de tomadas Tasmota",externalLinks:"Links da barra lateral para serviços externos",printers:"Informações da impressora (códigos de acesso excluídos)",plateDetection:"Imagens de referência de placa vazia",filaments:"Tipos e custos de filamento",maintenance:"Cronogramas de manutenção personalizados",archives:"Todos os dados de impressão + arquivos (3MF, miniaturas, fotos)",projects:"Projetos, itens de BOM e anexos",pendingUploads:"Uploads de impressora virtual aguardando revisão",apiKeys:"Chaves API de webhook (novas chaves geradas na importação)"},requiresPrinters:"Requer que as impressoras sejam selecionadas",zipFileWarning:"Um arquivo ZIP será criado.",zipFileDescription:"Inclui todos os arquivos 3MF, miniaturas, timelapses e fotos. Isso pode levar algum tempo e resultar em um arquivo grande.",includeAccessCodes:"Incluir Códigos de Acesso",includeAccessCodesDescription:"Para transferir para outra máquina",includeAccessCodesWarning:"Os códigos de acesso serão incluídos em texto simples. Mantenha este arquivo de backup seguro!",categoriesSelected:"{{selectedCount}} categorias selecionadas"},pendingUploads:{placeholders:{notes:"Adicione notas sobre esta impressão..."},discardUpload:"Descartar Upload",archiveAllUploads:"Arquivar Todos os Uploads",discardAllUploads:"Descartar Todos os Uploads",archive:"Arquivar",timeAgo:{justNow:"Agora mesmo",minutesAgo:"há {{minutes}} minutos",hoursAgo:"há {{hours}} horas",daysAgo:"há {{days}} dias"}},apiBrowser:{placeholders:{requestBody:"Corpo da requisição JSON...",searchEndpoints:"Pesquisar endpoints..."}},configureAmsSlot:{title:"Configurar Slot AMS",slotConfigured:"Slot Configurado!",configuringSlot:"Configurando slot:",slotLabel:"{{ams}} Slot {{slot}}",searchPresets:"Pesquisar predefinições...",colorPlaceholder:"Nome da cor ou hex (ex.: marrom, FF8800)",clearCustomColor:"Limpar cor personalizada",noCloudPresets:"Nenhuma predefinição na nuvem. Faça login no Bambu Cloud para sincronizar.",noPresetsAvailable:"Nenhuma predefinição disponível. Faça login no Bambu Cloud ou importe perfis locais.",noMatchingPresets:"Nenhuma predefinição correspondente encontrada.",custom:"Personalizado",builtin:"Integrado",settingsSentToPrinter:"Configurações enviadas para a impressora",filamentProfile:"Perfil de Filamento",kProfileLabel:"Perfil K (Avanço de Pressão)",filteringFor:"Filtrando por: {{material}}",noKProfile:"Nenhum perfil K (usar padrão 0.020)",noMatchingKProfiles:"Nenhum perfil K correspondente encontrado. O K padrão=0.020 será usado.",selectFilamentFirst:"Selecione um perfil de filamento primeiro",kFromCalibration:"K={{value}} da calibração da impressora",customColorLabel:"Cor Personalizada (opcional)",presetColors:"Cores de {{name}}:",showLessColors:"Mostrar menos cores",showMoreColors:"Mostrar mais cores",clear:"Limpar",hexLabel:"Hex: #{{hex}}",resetting:"Redefinindo...",resetSlot:"Redefinir Slot",cancel:"Cancelar",configuring:"Configurando...",configureSlot:"Configurar Slot"},githubBackup:{title:"Backup do GitHub",history:"Histórico",downloadBackup:"Baixar Backup",restoreBackup:"Restaurar Backup",noBackupsYet:"Nenhum backup ainda"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"Pesquisar tags...",renameTag:"Renomear tag",deleteTag:"Excluir tag"},notificationTemplates:{placeholders:{title:"Título da notificação...",body:"Corpo da notificação..."}},batchTag:{placeholders:{newTag:"Digite uma nova tag..."}},photoGallery:{deletePhoto:"Excluir foto"},filamentHoverCard:{copySpoolUuid:"Copiar UUID do carretel"},kProfilesView:{hasNote:"Possui nota",copyProfile:"Copiar perfil"},layout:{openMenu:"Abrir menu",noPermissionSystemInfo:"Você não tem permissão para visualizar informações do sistema"},dashboard:{dragToReorder:"Arrastar para reordenar",hideWidget:"Ocultar widget"},notificationProviderCard:{deleteNotificationProvider:"Excluir provedor de notificação"},fileManagerModal:{closeFileManager:"Fechar gerenciador de arquivos",sortFiles:"Ordenar arquivos",goToParentFolder:"Ir para a pasta pai",threeView:"Visualização 3D"},embeddedCameraViewer:{refreshStream:"Atualizar stream",close:"Fechar",zoomOut:"Reduzir zoom",resetZoom:"Redefinir zoom",zoomIn:"Aumentar zoom",dragToResize:"Arrastar para redimensionar"},timelapseViewer:{skipBack5s:"Voltar 5s",skipForward5s:"Avançar 5s"},notificationProviders:{descriptions:{email:"Notificações por email SMTP",telegram:"Notificações via bot do Telegram",discord:"Enviar para canal do Discord via webhook",ntfy:"Notificações push gratuitas e auto-hospedáveis",pushover:"Notificações push simples e confiáveis",callmebot:"Notificações gratuitas via WhatsApp pelo CallMeBot",webhook:"POST HTTP genérico para qualquer URL"}},logViewer:{searchPlaceholder:"Pesquisar mensagem ou nome do logger...",noLogEntries:"Nenhuma entrada de log encontrada"},switchbarPopover:{noSwitchesInSwitchbar:"Nenhum switch na barra de switches"},projectPageModal:{placeholders:{title:"Título",designer:"Designer",license:"Licença",description:"Digite a descrição...",profileTitle:"Título do perfil",profileDescription:"Descrição do perfil..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"Aguardando",justNow:"Agora mesmo",now:"Agora",minsAgo:"{{count}}min atrás",inMins:"em {{count}}min",hoursAgo:"{{count}}h atrás",inHours:"em {{count}}h",daysAgo:"{{count}}d atrás",inDays:"em {{count}}d"},spoolbuddy:{nav:{dashboard:"Painel",ams:"AMS",inventory:"Inventário",writeTag:"Escrever",settings:"Configurações"},status:{nfcReady:"NFC pronto",nfcOff:"NFC desligado",offline:"Offline",online:"Online",noPrinters:"Sem impressoras",deviceOffline:"Dispositivo offline",waitingConnection:"Aguardando conexão do dispositivo...",systemReady:"Sistema pronto",status:"Status"},dashboard:{readyToScan:"Pronto para escanear",idleMessage:"Coloque um carretel na balança para identificá-lo",nfcHint:"A tag NFC será lida automaticamente",device:"Dispositivo",syncWeight:"Sincronizar peso",weightSynced:"Sincronizado!",unknownTag:"Tag desconhecida",newTag:"Nova tag detectada",onScale:"na balança",linkSpool:"Vincular ao carretel",linkTagTitle:"Vincular tag ao carretel",linkTag:"Vincular tag",selectSpool:"Selecione um carretel para vincular a esta tag:",noUntagged:"Nenhum carretel sem tag encontrado",tagDetected:"Tag detectada",noTag:"Sem tag",tagId:"Tag",grossWeight:"Peso bruto",spoolSize:"Tamanho do carretel",close:"Fechar",currentSpool:"Carretel Atual",plateReady:"Mesa pronta: {{name}}",plateReadyLabel:"Mesas para liberar",plateClearAction:"Liberar",plateClearedToast:"Mesa marcada como limpa",plateClearFailed:"Não foi possível marcar a mesa como limpa"},modal:{spoolDetected:"Carretel Detectado",assignToAms:"Atribuir ao AMS",syncWeight:"Sincronizar Peso",weightSynced:"Sincronizado!",syncing:"Sincronizando...",newTagDetected:"Nova Tag Detectada",addToInventory:"Adicionar ao Inventário",assignToAmsTitle:"Atribuir ao AMS",selectSlot:"Selecionar um slot",assign:"Atribuir",assigning:"Atribuindo...",assignSuccess:"Atribuído!",assignError:"Falha ao atribuir carretel. Tente novamente.",noPrinterSelected:"Selecionar uma impressora...",noAmsDetected:"Nenhum AMS detectado nesta impressora",slot:"Slot"},weight:{noReading:"Sem leitura",stable:"Estável",measuring:"Medindo...",tare:"Tarar",calibrate:"Calibrar"},spool:{remaining:"Restante",material:"Material",brand:"Marca",color:"Cor",coreWeight:"Núcleo",labelWeight:"Rótulo",scaleWeight:"Balança",netWeight:"Líquido",lastUsed:"Último uso"},ams:{noData:"Nenhum AMS detectado",connectAms:"Conecte um AMS para ver os slots",noPrinter:"Nenhuma impressora selecionada",selectPrinter:"Selecione uma impressora na barra superior",printerDisconnected:"Impressora desconectada",humidity:"Umidade",level:"Nível",active:"Ativo",slot:"Slot",empty:"Vazio"},inventory:{search:"Buscar carretéis...",empty:"Nenhum carretel no inventário",noResults:"Nenhum carretel correspondente",spools:"carretéis",addSpool:"Adicionar carretel"},settings:{tabDevice:"Dispositivo",tabDisplay:"Tela",tabScale:"Balança",tabUpdates:"Atualizações",nfcReader:"Leitor NFC",type:"Tipo",connection:"Conexão",notConnected:"N/A",deviceInfo:"Info do dispositivo",hostname:"Host",uptime:"Tempo de atividade",brightness:"Brilho",saved:"Salvo",noBacklight:"Nenhuma retroiluminação DSI detectada. O controle de brilho requer uma tela DSI.",screenBlank:"Tempo para desligar tela",screenBlankDesc:"A tela desliga após inatividade. Toque para despertar.",displayNote:"O brilho é aplicado como filtro de software.",scaleCalibration:"Calibração da balança",currentWeight:"Peso atual",tareOffset:"Tara",calFactor:"Fator",knownWeight:"Peso conhecido",calStep1:"Remova todos os itens da balança e pressione Definir zero.",calStep2:"Coloque o peso conhecido na balança.",setZero:"Definir zero",calibrateNow:"Calibrar",calibrated:"Calibrado",tareSet:"Comando de tara enviado. Aguardando dispositivo...",tareFailed:"Falha ao enviar comando de tara",zeroSet:"Ponto zero definido. Coloque o peso conhecido na balança.",calibrationDone:"Calibração concluída!",calibrationFailed:"Falha na calibração",lastCalibrated:"Última calibração",stable:"Estável",settling:"Estabilizando...",firmware:"Firmware",scale:"Balança",noDevice:"Nenhum dispositivo SpoolBuddy encontrado",daemonVersion:"Versão do daemon",currentVersion:"Atual",versionPending:"Aguardando daemon...",checking:"Verificando...",checkUpdates:"Verificar atualizações",updateAvailable:"Atualização disponível",updateInstructions:"Atualize via SSH: execute o script de instalação do SpoolBuddy.",upToDate:"Atualizado",includeBeta:"Incluir versões beta",systemConfig:"Backend e autenticação",backendUrl:"URL do backend Bambuddy",apiToken:"Token de API",apiTokenPlaceholder:"Insira o token de API",saveConfig:"Salvar configuração",systemQueued:"Configuração enfileirada.",systemFieldsRequired:"URL do backend é obrigatória.",nfcDiagnostic:"Diagnóstico NFC",scaleDiagnostic:"Diagnóstico da balança",readTagDiagnostic:"Diagnóstico de leitura de tag",testNfc:"Testar leitor",testScale:"Testar precisão",testReadTag:"Ler tag"},writeTag:{tabExisting:"Bobina existente",tabNew:"Nova bobina",tabReplace:"Substituir tag",searchPlaceholder:"Buscar por material, cor, marca...",noUntaggedSpools:"Nenhuma bobina sem tag",noTaggedSpools:"Nenhuma bobina com tag",selectSpool:"Selecione uma bobina e coloque um NTAG no leitor",placeTag:"Coloque um NTAG no leitor",tagReady:"Tag detectado — pronto para gravar",writeTag:"Gravar Tag",replaceTag:"Substituir Tag",writing:"Gravando tag...",waiting:"Aguardando SpoolBuddy...",writeSuccess:"Tag gravado com sucesso!",writeFailed:"Falha na gravação",queueFailed:"Falha ao enfileirar comando de gravação",tryAgain:"Tentar novamente",cancel:"Cancelar",replaceWarning:"O tag antigo será desvinculado. O novo tag o substituirá.",deviceOffline:"SpoolBuddy está offline",material:"Material",colorName:"Nome da cor",color:"Cor",brand:"Marca",weight:"Peso (g)",createSpool:"Criar bobina",creating:"Criando...",spoolCreated:"Bobina criada! Pronto para gravar.",createFailed:"Falha ao criar bobina"},quickMenu:{printerPower:"Energia da impressora",systemControls:"Sistema",restartDaemon:"Reiniciar daemon",restartBrowser:"Reiniciar navegador",reboot:"Reiniciar",shutdown:"Desligar",swipeToClose:"Deslize para baixo para fechar",confirmTitle:"Confirmar",confirmShutdown:"Tem certeza de que deseja desligar o SpoolBuddy? Você precisará de acesso físico para ligá-lo novamente.",confirmReboot:"Tem certeza de que deseja reiniciar o SpoolBuddy?",confirmRestartDaemon:"Reiniciar o daemon do SpoolBuddy? NFC e balança ficarão temporariamente indisponíveis.",confirmRestartBrowser:"Reiniciar o navegador kiosk? A tela ficará brevemente preta.",confirm:"Confirmar",confirmPlugOn:"Ligar {{name}}?",confirmPlugOff:"Desligar {{name}}?",turnOn:"Ligar",turnOff:"Desligar"}},bugReport:{title:"Reportar um bug",description:"Descrição",descriptionPlaceholder:"O que deu errado? Por favor, descreva o problema...",email:"Email (opcional)",emailPlaceholder:"seu@email.com.br",emailPrivacy:"Se fornecido, seu email será incluído em uma seção recolhida da issue no GitHub para que o mantenedor possa entrar em contato.",screenshot:"Captura de tela",uploadOrPaste:"Enviar, colar ou arrastar uma imagem",dataCollectedSummary:"Quais dados são incluídos no relatório?",dataIncluded:"Incluídos:",dataIncludedList:"Versão do app, SO, arquitetura, versão Python, estatísticas do banco de dados (apenas contagens), modelos de impressora, quantidade de bicos, versões de firmware, status de conexão, status de integrações (Spoolman, MQTT, HA), configurações não sensíveis, contagem de interfaces de rede, detalhes Docker, versões de dependências.",dataNeverIncluded:"Nunca incluídos:",dataNeverIncludedList:"Nomes de impressoras, números de série, códigos de acesso, senhas, endereços IP, endereços de email, chaves de API, tokens, URLs de webhook, nomes de host ou nomes de usuário.",submit:"Enviar",startLogging:"Iniciar log de depuração",stepEnableLogging:"Log de depuração ativado",stepReproduce:"Reproduza o problema agora",stepStopLogging:"Parar & enviar relatório",stopAndSubmit:"Parar & Enviar",maxDuration:"Para automaticamente após {{minutes}} min",stoppingLogs:"Coletando logs & enviando...",submitting:"Enviando relatório de bug...",submitSuccess:"Relatório de bug enviado com sucesso!",submitFailed:"Falha ao enviar relatório de bug",thankYou:"Obrigado!",submitted:"Seu relatório de bug foi enviado.",viewIssue:"Ver issue",unexpectedError:"Ocorreu um erro inesperado"},failureDetection:{title:"Detecção de Falhas por IA",description:"Monitora impressões via API ML do Obico auto-hospedada e age automaticamente em falhas detectadas.",mlUrl:"URL da API ML do Obico",mlUrlHint:"URL base do seu contêiner Obico ml_api auto-hospedado (ex.: http://192.168.1.10:3333).",test:"Testar",testSuccess:"API ML acessível e operacional.",testFailed:"Não foi possível acessar a API ML.",sensitivity:"Sensibilidade",sensitivityLow:"Baixa (menos falsos positivos)",sensitivityMedium:"Média (equilibrada)",sensitivityHigh:"Alta (detecção precoce, mais falsos positivos)",sensitivityHint:"Ajusta os limiares de confiança que disparam avisos e falhas.",action:"Ação em falha detectada",actionNotify:"Apenas notificar",actionPause:"Pausar impressão",actionPauseOff:"Pausar e cortar energia",pollInterval:"Intervalo de verificação (segundos)",pollIntervalHint:"Frequência de verificação de cada impressora durante a impressão. Mínimo 5s, máximo 120s.",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"Impressoras monitoradas",perPrinterHint:"Escolha quais impressoras o serviço de detecção monitora.",monitorAll:"Monitorar todas as impressoras conectadas",statusTitle:"Status",serviceRunning:"Serviço em execução",thresholds:"Limiares baixo / alto",activePrinters:"Impressões ativas",noActivePrints:"Nenhuma impressão em andamento.",historyTitle:"Detecções recentes",noHistory:"Nenhuma detecção ainda."},makerworld:{title:"MakerWorld",description:"Cole uma URL de modelo do MakerWorld para importar e imprimir diretamente do Bambuddy — sem precisar abrir o app Bambu Handy.",pasteUrlHeader:"Importar do MakerWorld",pasteUrlPlaceholder:"https://makerworld.com/en/models/… ou cole qualquer link do MakerWorld",resolveButton:"Resolver",signInRequiredTitle:"Login no Bambu Cloud necessário para baixar",signInRequiredBody:"Você pode navegar pelos detalhes do modelo anonimamente, mas o MakerWorld exige uma conta Bambu Cloud para baixar arquivos 3MF.",openCloudSettings:"Abrir configurações do Cloud",untitledModel:"Modelo sem título",byCreator:"por {{name}}",downloadsCount:"{{count}} downloads",licensePrefix:"Licença",alreadyImported:"Já na biblioteca",openOnMakerworld:"Abrir no MakerWorld",alreadyInLibrary:"Este modelo já está na sua biblioteca — encontre-o em Gerenciador de Arquivos → MakerWorld",importSuccess:"{{filename}} importado — salvo em Gerenciador de Arquivos → MakerWorld",platesHeader:"Placas ({{count}})",plateDefaultName:"Placa {{n}}",materialCount:"{{count}} filamentos",amsRequired:"AMS necessário",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"Salvar",sliceIn:"Salvar e fatiar no {{slicer}}",disclaimer:"A integração com o MakerWorld usa endpoints de API documentados pela comunidade. Bambuddy não é afiliado nem endossado pelo MakerWorld ou pela Bambu Lab.",lastImportSuccess:"Importado para sua biblioteca",lastImportAlreadyInLibrary:"Já na sua biblioteca",viewInLibrary:"Ver no Gerenciador de Arquivos",openInBambuStudio:"Abrir no Bambu Studio",openInOrcaSlicer:"Abrir no OrcaSlicer",importTo:"Importar para o Gerenciador de Arquivos",recentImportsHeader:"Importações recentes",phaseResolving:"Resolvendo",phaseDownloading:"Baixando",folderAuto:"MakerWorld (padrão)",importAll:"Importar tudo",importAllProgress:"Importando {{current}}/{{total}}",openGallery:"Abrir galeria de imagens",galleryPrev:"Imagem anterior",galleryNext:"Próxima imagem",deleteImport:"Remover da biblioteca",importDeleting:"Removendo…",importDeleted:"Removido da biblioteca",confirmDelete:"Remover {{filename}} da biblioteca? O arquivo local será excluído, mas a placa pode ser reimportada do MakerWorld.",errors:{resolveFailed:"Não foi possível resolver essa URL do MakerWorld.",downloadFailed:"Falha no download. Tente novamente.",deleteFailed:"Não foi possível remover o arquivo da biblioteca."}},libraryTrash:{title:"Lixeira",headerButton:"Lixeira",headerTooltip:"Ver arquivos movidos para a lixeira",backToFiles:"Voltar ao gerenciador de arquivos",subtitleAdmin:"Arquivos excluídos ficam aqui por {{days}} dias e depois são removidos automaticamente. Esta visualização mostra a lixeira de todos os usuários.",subtitleUser:"Arquivos excluídos ficam aqui por {{days}} dias e depois são removidos automaticamente.",loading:"Carregando a lixeira…",loadError:"Não foi possível carregar a lixeira.",empty:"A lixeira está vazia.",summary:"{{count}} arquivos · {{size}}",emptyTrash:"Esvaziar lixeira",restore:"Restaurar",purgeNow:"Excluir agora",autoPurgeIn:"Exclusão automática em {{when}}",days:"dias",retentionLabel:"Excluir automaticamente após",selectAll:"Selecionar todos",selectOne:"Selecionar {{filename}}",selectionCount:"{{count}} selecionado(s)",bulkRestore:"Restaurar selecionados",bulkPurge:"Excluir selecionados",col:{filename:"Arquivo",folder:"Pasta",size:"Tamanho",deleted:"Movido para a lixeira",autoPurge:"Exclusão auto.",owner:"Proprietário",actions:"Ações"},confirm:{purgeTitle:"Excluir permanentemente?",purgeBody:"{{filename}} será excluído do disco e não poderá ser restaurado.",emptyTitle:"Esvaziar a lixeira?",emptyBody:"Todos os {{count}} arquivos serão excluídos do disco. Esta ação não pode ser desfeita.",bulkPurgeTitle:"Excluir permanentemente os arquivos selecionados?",bulkPurgeBody:"Os {{count}} arquivos selecionados serão excluídos do disco e não poderão ser restaurados.",cta:"Excluir permanentemente"},toast:{restored:"Arquivo restaurado.",restoreFailed:"Não foi possível restaurar o arquivo.",purged:"Arquivo excluído permanentemente.",purgeFailed:"Não foi possível excluir o arquivo.",emptied:"{{count}} arquivo(s) excluído(s) da lixeira.",emptyFailed:"Não foi possível esvaziar a lixeira.",retentionSaved:"Exclusão automática definida para {{days}} dias.",retentionFailed:"Não foi possível salvar a configuração de retenção.",bulkRestored:"{{count}} arquivo(s) restaurado(s).",bulkPurged:"{{count}} arquivo(s) excluído(s)."}},libraryPurge:{title:"Limpar arquivos antigos",headerButton:"Limpar antigos",headerTooltip:"Mover arquivos antigos em massa para a lixeira",description:"Arquivos mais antigos que o limite serão movidos para a lixeira. Pastas externas são ignoradas. Você pode restaurar da lixeira antes da exclusão automática.",ageLabel:"Mover arquivos mais antigos que",days:"dias",includeNeverPrinted:"Incluir arquivos que nunca foram impressos",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"Verificando quantos arquivos correspondem…",previewFailed:"Não foi possível pré-visualizar a limpeza.",previewSummary:"{{count}} arquivos · {{size}} seriam movidos para a lixeira",andMore:"…e mais {{count}}",warning:"Os arquivos são excluídos de forma suave — você pode restaurá-los da lixeira até o fim do período de retenção.",confirmCta:"Mover {{count}} para a lixeira",purging:"Movendo para a lixeira…",toast:{success:"{{count}} arquivo(s) movido(s) para a lixeira.",failed:"Não foi possível limpar os arquivos."}},libraryAutoPurge:{enableLabel:"Limpar arquivos antigos automaticamente",enableDescription:"Executa a limpeza administrativa uma vez por dia. Os arquivos vão primeiro para a lixeira — não são excluídos imediatamente.",ageLabel:"Limpar automaticamente arquivos mais antigos que",ageDescription:"Mínimo 7 dias, máximo 10 anos. Usa a mesma regra de idade do botão Limpar manual.",days:"dias",includeNeverPrinted:"Incluir arquivos que nunca foram impressos",saveFailed:"Não foi possível salvar as configurações de limpeza automática."},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},Nme={nav:{printers:"打印机",archives:"归档",queue:"队列",stats:"统计",profiles:"配置文件",maintenance:"维护",projects:"项目",inventory:"耗材",files:"文件管理器",makerworld:"MakerWorld",notifications:"通知",settings:"设置",system:"系统",collapseSidebar:"收起侧边栏",expandSidebar:"展开侧边栏",update:"更新",updateAvailable:"有可用更新：v{{version}}",updateAvailableBanner:"版本 {{version}} 已发布！",viewUpdate:"查看更新",viewOnGithub:"在 GitHub 上查看",keyboardShortcuts:"键盘快捷键 (?)",switchToLight:"切换到浅色模式",switchToDark:"切换到深色模式",smartSwitches:"智能开关",logout:"退出登录"},common:{save:"保存",saving:"保存中...",cancel:"取消",delete:"删除",edit:"编辑",add:"添加",close:"关闭",confirm:"确认",loading:"加载中...",error:"错误",success:"成功",warning:"警告",enabled:"已启用",disabled:"已禁用",yes:"是",no:"否",on:"开",off:"关",all:"全部",none:"无",search:"搜索",filter:"筛选",sort:"排序",refresh:"刷新",download:"下载",upload:"上传",uploading:"上传中...",uploadFailed:"上传失败",actions:"操作",status:"状态",name:"名称",description:"描述",date:"日期",time:"时间",hours:"小时",minutes:"分钟",seconds:"秒",days:"天",enable:"启用",disable:"禁用",permissions:"权限",noPrinters:"未配置打印机",noData:"暂无数据",linkNotFound:"未找到链接",required:"必填",optional:"可选",dismiss:"关闭",apply:"应用",reset:"重置",export:"导出",import:"导入",clear:"清除",selectAll:"全选",deselectAll:"取消全选",noChange:"— 不更改 —",unchanged:"未更改",unassigned:"未分配",unknown:"未知",unknownError:"未知错误",today:"今天",tomorrow:"明天",asap:"尽快",overdue:"已逾期",now:"现在",collapse:"收起",expand:"展开",viewArchive:"查看归档",viewInFileManager:"在文件管理器中查看",addedBy:"由 {{username}} 添加",prints:"次打印",more:"还有 {{count}} 个",ascending:"升序",descending:"降序",back:"返回",copy:"复制",copied:"已复制!",printer:"打印机",remove:"移除",type:"类型",print:"打印",rename:"重命名",move:"移动",create:"创建",duplicate:"复制",left:"左",right:"右"},printers:{title:"打印机",addPrinter:"添加打印机",editPrinter:"编辑打印机",deletePrinter:"删除打印机",printerName:"打印机名称",serialNumber:"序列号",ipAddress:"IP 地址 / 主机名",accessCode:"访问码",model:"型号",nozzleCount:"喷嘴数量",autoArchive:"自动归档",status:{available:"可用",idle:"空闲",printing:"打印中",paused:"已暂停",offline:"离线",problem:"故障",error:"错误",finished:"已完成",unknown:"未知"},temperatures:{nozzle:"喷嘴",bed:"热床",chamber:"腔室"},progress:"{{percent}}% 完成",timeRemaining:"剩余 {{time}}",deleteConfirm:'确定要删除"{{name}}"吗？',maintenanceOk:"维护正常",maintenanceWarning:"{{count}} 个警告",maintenanceWarning_plural:"{{count}} 个警告",maintenanceDue:"{{count}} 个到期",maintenanceDue_plural:"{{count}} 个到期",sort:{name:"名称",status:"状态",model:"型号",location:"位置",ascending:"升序排列",descending:"降序排列"},cardSize:{small:"小卡片",medium:"中卡片",large:"大卡片",extraLarge:"超大卡片"},hideOffline:"隐藏离线",nextAvailable:"下一个可用",powerOn:"开机",offlinePrintersWithPlugs:"带智能插座的离线打印机",noPrintersConfigured:"尚未配置打印机",search:"搜索打印机...",noSearchResults:"没有打印机符合您的搜索或筛选条件",filter:{allStatuses:"所有状态",allLocations:"所有位置"},readyToPrint:"准备打印",external:"外部",extL:"外置左",extR:"外置右",deleteArchives:"删除打印归档",noLabel:"无标签",printPreview:"打印预览",width:"宽度",height:"高度",noObjectsFound:"未找到对象",objectsLoadedOnPrintStart:"对象在打印开始时加载",willBeSkipped:"将被跳过",name:"名称",serialCannotBeChanged:"序列号无法更改",locationHelp:"用于分组打印机和筛选队列任务",wifiSignal:{veryWeak:"非常弱",weak:"弱",fair:"一般",good:"良好",excellent:"优秀"},maintenanceUpToDate:"所有维护均已完成 - 点击查看",chamberLightOn:"打开腔室灯",chamberLightOff:"关闭腔室灯",files:"文件",browseFiles:"浏览打印机文件",autoOffAfterPrint:"打印后自动关机",autoOffExecuted:"已执行自动关机 - 开启打印机以重置",hmsErrors:"HMS 错误",viewHmsErrors:"查看 {{count}} 个 HMS 错误",resume:"继续",pause:"暂停",stop:"停止",camera:"摄像头",skipObject:"跳过对象",reconnect:"重新连接",forceRefresh:"强制刷新",forceRefreshSuccess:"已请求刷新",mqttDebug:"MQTT 调试",printerInformation:"打印机信息",copyToClipboard:"复制",copied:"已复制！",state:"状态",wifiSignalLabel:"WiFi 信号",developerMode:"开发者模式",enabled:"已启用",disabled:"已禁用",addedOn:"添加日期",sdCard:"SD 卡",inserted:"已插入",notInserted:"未插入",totalPrintHours:"打印时长",activeNozzle:"当前：{{nozzle}} 喷嘴",nozzleRack:"喷嘴架",nozzleDocked:"已停靠",nozzleMounted:"已安装",nozzleActive:"使用中",nozzleIdle:"空闲",nozzleDiameter:"直径",nozzleType:"类型",nozzleStatus:"状态",nozzleFilament:"耗材",nozzleWear:"磨损",nozzleMaxTemp:"最高温度",nozzleSerial:"序列号",nozzleHardenedSteel:"硬化钢",nozzleStainlessSteel:"不锈钢",nozzleTungstenCarbide:"碳化钨",nozzleFlow:"流量",nozzleHighFlow:"高流量",nozzleStandardFlow:"标准",firmwareUpdate:"固件更新",firmwareInstructions:"在打印机触摸屏上，前往",firmwareNav:"导航到",settings:"设置",firmware:"固件",discoverPrinters:"发现打印机",searching:"搜索中...",manualEntry:"手动输入",addFromCloud:"从云端添加",toast:{printerDeleted:"打印机已删除",missingSpoolAssignment:"已在{{printer}}上开始打印。以下料槽未分配耗材: {{slots}}",printerAdded:"打印机已添加",printerUpdated:"打印机已更新",failedToDelete:"删除打印机失败",failedToAdd:"添加打印机失败",failedToUpdate:"更新打印机失败",commandSent:"命令已发送",failedToSendCommand:"发送命令失败",turnedOn:"{{name}} 已开启",failedToPowerOn:"开启 {{name}} 失败",scriptTriggered:"脚本已触发",printStopped:"打印已停止",printPaused:"打印已暂停",printResumed:"打印已继续",referenceDeleted:"参考已删除",detectionAreaSaved:"检测区域已保存",failedToRunScript:"运行脚本失败",failedToStopPrint:"停止打印失败",failedToPausePrint:"暂停打印失败",failedToResumePrint:"继续打印失败",failedToControlChamberLight:"控制腔室灯失败",failedToSetSpeed:"设置打印速度失败",failedToUpdateSetting:"更新设置失败",failedToSkipObjects:"跳过对象失败",failedToRereadRfid:"重新读取 RFID 失败",failedToCheckPlate:"检查打印板失败",failedToUpdateLabel:"更新标签失败",failedToDeleteReference:"删除参考失败",failedToSaveDetectionArea:"保存检测区域失败",plateCheckEnabled:"打印板检查已启用",plateCheckDisabled:"打印板检查已禁用",calibrationSaved:"校准已保存！",calibrationFailed:"校准失败",rfidRereadInitiated:"已发起 RFID 重新读取"},connection:{connected:"已连接",offline:"离线"},plateStatus:{markCleared:"将打印板标记为已清理",cleared:"打印板已清理",notCleared:"打印板未清理",inUse:"打印板使用中"},queue:{inQueue:"队列中有 {{count}} 个打印任务",inQueue_plural:"队列中有 {{count}} 个打印任务"},controls:"控制",rfid:{reread:"重新读取 RFID"},bedJog:{title:"移动热床",bed:"热床",step:"步长 (mm)",up:"热床上移",down:"热床下移",disabledWhilePrinting:"打印中已禁用",notHomedTitle:"打印机未归零",notHomedMessage:"打印机自上次打印以来尚未归零。请先执行自动归零以确保安全定位（先停放喷头，然后归零 X、Y 和 Z），或者直接移动 — 软限位将被绕过。",homeZ:"自动归零",moveAnyway:"强制移动",homingStarted:"打印机自动归零中…"},permission:{noAdd:"您没有添加打印机的权限",noEdit:"您没有编辑打印机的权限",noDelete:"您没有删除打印机的权限",noControl:"您没有控制打印机的权限",noFiles:"您没有访问打印机文件的权限",noAmsRfid:"您没有重新读取 AMS RFID 的权限",noSmartPlugControl:"您没有控制智能插座的权限",noCamera:"您没有查看摄像头的权限"},modal:{addTitle:"添加打印机",editTitle:"编辑打印机",myPrinter:"我的打印机",selectModel:"选择型号...",locationGroup:"位置 / 分组（可选）",locationPlaceholder:"例如：工作室、办公室、地下室",autoArchiveLabel:"自动归档已完成的打印",fromPrinterSettings:"来自打印机设置",modelOptional:"型号（可选）",saveChanges:"保存更改"},skipObjects:{tooltip:"跳过对象",onlyWhilePrinting:"跳过对象（仅在打印时）",requiresMultiple:"跳过对象（需要2个以上对象）",title:"跳过对象",matchIdsInfo:"将 ID 与打印机显示屏上的 ID 进行对照",printerShowsIds:"打印机屏幕上显示构建板上对象的 ID",skipSelected:"跳过所选",skipping:"跳过中...",noObjectsSelected:"未选择对象",selectObjectsToSkip:"选择要从当前打印中跳过的对象",skipped:"已跳过",objectsSkipped:"对象已跳过",activeCount:"{{count}} 个活跃",waitForLayer:"等待第2层以上才能跳过对象（当前第 {{layer}} 层）",skip:"跳过",confirmTitle:"跳过对象？",confirmMessage:'确定要跳过"{{name}}"吗？此操作无法撤销。'},confirm:{deleteTitle:"删除打印机",deleteMessage:'确定要删除"{{name}}"吗？这将移除所有连接设置。',deleteArchivesNote:"此打印机的所有打印历史将被永久删除。",keepArchivesNote:"打印历史将保留，但不再与此打印机关联。",stopTitle:"停止打印",stopMessage:'确定要停止"{{name}}"上的当前打印吗？这将取消打印任务。',stopButton:"停止打印",pauseTitle:"暂停打印",pauseMessage:'确定要暂停"{{name}}"上的当前打印吗？',pauseButton:"暂停打印",resumeTitle:"继续打印",resumeMessage:'确定要继续"{{name}}"上的打印吗？',resumeButton:"继续打印",powerOnTitle:"开启打印机",powerOnMessage:'确定要打开"{{name}}"的电源吗？',powerOnButton:"开机",powerOffTitle:"关闭打印机",powerOffMessage:'确定要关闭"{{name}}"的电源吗？',powerOffWarning:'警告："{{name}}"正在打印中！确定要关闭电源吗？这将中断打印并可能损坏打印机。',powerOffButton:"关机"},bulk:{select:"选择",selectAll:"全选",selectByLocation:"按位置选择",selected:"已选择{{count}}台",actions:{stop:"停止",pause:"暂停",resume:"继续",clearPlate:"清除打印床",clearHMS:"清除通知"},confirm:{stopTitle:"停止{{count}}个打印任务",stopMessage:"这将取消{{count}}台打印机上的活动打印任务。此操作无法撤销。",stopButton:"全部停止",pauseTitle:"暂停{{count}}个打印任务",pauseMessage:"这将暂停{{count}}台打印机上的活动打印任务。",pauseButton:"全部暂停",clearPlateTitle:"清除{{count}}个打印床",clearPlateMessage:"这将清除{{count}}台打印机的打印床，可能会触发队列中的任务。",clearPlateButton:"全部清除"},success:"{{action}}已在{{count}}台打印机上完成",partial:"{{succeeded}}成功，{{failed}}失败",noneApplicable:"没有选中的打印机处于适合此操作的状态",selectByState:"按状态选择"},discovery:{title:"发现打印机",searching:"搜索中...",scanning:"扫描中...",scanProgress:"扫描中... {{scanned}}/{{total}}",foundPrinters:"发现 {{count}} 台打印机",noPrintersFound:"未找到打印机",noPrintersFoundSubnet:"在指定子网中未找到打印机。",noPrintersFoundNetwork:"在网络上未找到打印机。",allConfigured:"所有发现的打印机已配置完毕。",alreadyAdded:"已添加",select:"选择",manualEntry:"手动输入",addFromCloud:"从云端添加",subnetToScan:"要扫描的子网",dockerNote:"检测到 Docker 环境。请以 CIDR 格式输入打印机所在子网。需要在 docker-compose.yml 中设置 network_mode: host。",scanSubnet:"扫描子网查找打印机",discoverNetwork:"在网络上发现打印机",scanningSubnet:"正在扫描子网查找拓竹打印机...",scanningNetwork:"正在扫描网络...",serialRequired:"需要序列号",unknown:"未知",failedToStart:"启动发现失败"},drying:{start:"开始干燥",stop:"停止干燥",temperature:"温度",duration:"时长",hours:"小时",timeRemaining:"剩余 {{time}}",active:"干燥中",notSupported:"不支持干燥",powerRequired:"连接AMS电源适配器以启用干燥",startingDrying:"正在启动干燥...",stoppingDrying:"正在停止干燥...",rotateTray:"干燥时旋转料盘"},filaments:"耗材",openCameraOverlay:"打开摄像头叠加层",openCameraWindow:"在新窗口中打开摄像头",firmwareUpdateAvailable:"固件更新可用：{{current}} → {{latest}}",firmwareUpToDate:"固件 {{version}} — 已是最新",firmwareUpdateButton:"更新",plateDetection:{noPermission:"您没有更新打印机的权限",enabledClick:"打印板检查已启用 - 点击禁用",disabledClick:"打印板检查已禁用 - 点击启用",manageCalibration:"管理打印板检测校准",calibrationRequired:"需要校准",calibrationInstructions:"请确保构建板<strong>完全空置</strong>，然后点击校准。",calibrationDescription:"校准会拍摄空置打印板的参考图像。后续检查将与此参考进行比较以检测物体。",calibrationTip:"<strong>提示：</strong>您最多可以为不同的打印板存储5个校准。系统会在检查时自动使用最佳匹配。",plateEmpty:"打印板似乎是空的",objectsDetected:"在打印板上检测到物体",confidence:"置信度",difference:"差异",analysisPreview:"分析预览：",analysisLegend:"绿色框 = 检测区域，红色覆盖 = 与校准的差异",savedReferences:"已保存的参考 ({{count}}/{{max}})",deleteReference:"删除参考",labelPlaceholder:"标签...",clickToEdit:"{{label}} - 点击编辑",clickToAddLabel:"点击添加标签"},speed:{title:"打印速度",silent:"静音 (50%)",standard:"标准 (100%)",sport:"运动 (124%)",ludicrous:"疯狂 (166%)"},airduct:{title:"风道模式",cooling:"制冷",heating:"加热"},noSdCard:"无SD",door:{open:"开",closed:"关"},fans:{partCooling:"零件冷却风扇",auxiliary:"辅助风扇",chamber:"腔室风扇"},clickToViewHmsErrors:"点击查看 HMS 错误",estimatedCompletion:"预计完成时间",plateNumber:"板 {{number}}",slotOptions:"槽位选项",amsPopup:{friendlyName:"AMS 名称",friendlyNamePlaceholder:"例如 AMS 友好名称",serialNumber:"序列号",firmwareVersion:"固件",save:"保存",clear:"清除",noEditPermission:"您没有重命名 AMS 单元的权限"},firmwareModal:{title:"固件更新",titleUpToDate:"固件信息",currentVersion:"当前版本：",latestVersion:"最新版本：",releaseNotes:"发布说明",checkingPrereqs:"正在检查前提条件...",sdCardReady:"SD 卡已就绪。点击下方上传固件。",uploadedSuccess:"固件已上传到 SD 卡！",applyInstructions:"在打印机上应用更新：",step1:"在打印机触摸屏上，前往<strong>设置</strong>",step2:"导航到<strong>固件</strong>",step3:"选择<strong>从 SD 卡更新</strong>",step4:"更新将需要 10-20 分钟",done:"完成",starting:"启动中...",uploadFirmware:"上传固件",uploadFailed:"上传启动失败：{{error}}",uploadedToast:"固件已上传！请在打印机屏幕上触发更新。",availableVersions:"可用版本",usable:"可用",unavailable:"不可用",installed:"已安装",newerBadge:"较新",olderBadge:"较旧",currentBadge:"当前"},accessCodePlaceholder:"留空以保持当前值",roi:{title:"检测区域 (ROI)",xStart:"X 起点",yStart:"Y 起点",width:"宽度",height:"高度",instruction:"调整检测区域以聚焦到构建板。预览中的绿色框显示当前区域。"},developerModeWarning:"以下打印机未启用开发者局域网模式：{{names}}。某些功能可能无法使用。",howToEnable:"如何启用",incompatibleFile:"此文件是为 {{slicedFor}} 切片的，但该打印机是 {{printerModel}}",dropNotPrintable:"只能打印 .gcode 和 .gcode.3mf 文件",dropToPrint:"拖放以打印",cannotPrint:"打印机忙碌"},archives:{title:"打印归档",searchPlaceholder:"搜索归档...",filterByPrinter:"按打印机筛选",filterByStatus:"按状态筛选",sortBy:"排序方式",sortNewest:"最新优先",sortOldest:"最旧优先",sortName:"名称",sortDuration:"时长",sortLargest:"最大优先",sortSmallest:"最小优先",sortSize:"大小",noArchives:"未找到归档",noArchivesSearch:"没有匹配搜索的归档",originalPrintNotVisible:"原始打印不可见 - 请尝试清除筛选条件",noArchivesYet:"暂无归档",prints:"条打印",pagination:{showing:"显示",to:"至",of:"共",show:"每页",page:"页",all:"全部"},loadingArchives:"加载归档中...",releaseToUpload:"释放以上传",showAll:"显示全部",showFavoritesOnly:"仅显示收藏",gridView:"网格视图",listView:"列表视图",calendarView:"日历视图",logView:"打印日志",manageTags:"管理标签",showFailedPrints:"显示失败的打印",hideFailedPrints:"隐藏失败的打印",hideDuplicates:"隐藏重复项",viewOriginalPrint:"点击查看原始打印 (#{{id}})",printTime:"打印时间",filamentUsed:"耗材用量",cost:"成本",reprint:"重新打印",preview:"预览",deleteArchive:"删除归档",deleteConfirm:"确定要删除此归档吗？",favorite:"收藏",unfavorite:"取消收藏",viewDetails:"查看详情",status:{completed:"已完成",failed:"失败",stopped:"已停止"},toast:{source3mfAttached:"源 3MF 已附加：{{filename}}",failedUploadSource3mf:"上传源 3MF 失败",source3mfRemoved:"源 3MF 已移除",failedRemoveSource3mf:"移除源 3MF 失败",f3dAttached:"F3D 已附加：{{filename}}",failedUploadF3d:"上传 F3D 失败",f3dRemoved:"F3D 已移除",failedRemoveF3d:"移除 F3D 失败",timelapseAttached:"延时摄影已附加：{{filename}}",timelapseAlreadyAttached:"延时摄影已附加",noMatchingTimelapse:"未找到匹配的延时摄影",failedScanTimelapse:"扫描延时摄影失败",failedAttachTimelapse:"附加延时摄影失败",timelapseRemoved:"延时摄影已移除",failedRemoveTimelapse:"移除延时摄影失败",timelapseUploaded:"延时摄影已上传：{{filename}}",failedUploadTimelapse:"上传延时摄影失败",archiveDeleted:"归档已删除",failedDeleteArchive:"删除归档失败",addedToFavorites:"已添加到收藏",removedFromFavorites:"已从收藏中移除",projectUpdated:"项目已更新",failedUpdateProject:"更新项目失败",linkCopied:"链接已复制到剪贴板",failedCopyLink:"复制链接失败",photoDeleted:"照片已删除",failedDeletePhoto:"删除照片失败",failedDeleteArchives:"删除归档失败",failedUpdateFavorites:"更新收藏失败",exportDownloaded:"导出已下载",exportFailed:"导出失败"},menu:{print:"打印",schedule:"排程",openInBambuStudio:"在切片软件中打开",slice:"切片",externalLink:"外部链接",viewOnMakerWorld:"在 MakerWorld 上查看",preview3d:"3D 预览",viewTimelapse:"查看延时摄影",scanForTimelapse:"扫描延时摄影",uploadTimelapse:"上传延时摄影",removeTimelapse:"移除延时摄影",downloadSource3mf:"下载源 3MF",uploadSource3mf:"上传源 3MF",replaceSource3mf:"替换源 3MF",removeSource3mf:"移除源 3MF",uploadF3d:"上传 F3D",replaceF3d:"替换 F3D",downloadF3d:"下载 F3D",removeF3d:"移除 F3D",download:"下载",copyDownloadLink:"复制下载链接",qrCode:"二维码",viewPhotos:"查看照片",viewPhotosCount:"查看照片 ({{count}})",projectPage:"项目页面",addToFavorites:"添加到收藏",removeFromFavorites:"从收藏中移除",edit:"编辑",goToProject:"前往项目：{{name}}",addToProject:"添加到项目",removeFromProject:"从项目中移除",loading:"加载中...",noProjectsAvailable:"无可用项目",searchProjects:"Search projects…",select:"选择",deselect:"取消选择",delete:"删除"},permission:{noReprint:"您没有重新打印此归档的权限",noAddToQueue:"您没有添加到队列的权限",noUpdateArchives:"您没有更新归档的权限",noUploadFiles:"您没有上传文件的权限",noDownload:"您没有下载归档的权限",noCopyLink:"您没有复制下载链接的权限",noDelete:"您没有删除此归档的权限",noCreate:"您没有创建归档的权限"},platePicker:{title:"选择要预览的打印板",hint:"此存档包含多个打印板。选择一个在 GCode 查看器中打开。",plateLabel:"打印板 {{index}}",objectCount:"{{count}} 个对象",objectCount_plural:"{{count}} 个对象",noGcode:"此存档没有可预览的已切片 G 代码。请先在 Bambu Studio 中打开并切片。"},card:{previousPlate:"上一个板",nextPlate:"下一个板",plateNumber:"板 {{index}}",moreOptions:"右键查看更多选项",addToFavorites:"添加到收藏",removeFromFavorites:"从收藏中移除",cancelled:"已取消",failed:"失败",duplicate:"重复",duplicateTitle:"此模型之前已打印过",openSource3mf:"在 Bambu Studio 中打开源 3MF（右键查看更多选项）",downloadF3d:"下载 Fusion 360 设计文件",viewTimelapse:"查看延时摄影",viewPhoto:"查看 1 张照片",viewPhotos:"查看 {{count}} 张照片",openFolder:"打开文件夹：{{name}}",slicedFile:"已切片文件 - 可以打印",sourceFile:"仅源文件 - 无 AMS 映射可用",gcode:"GCODE",source:"源文件",project:"项目：{{name}}",estimated:"预计：{{time}}",actual:"实际：{{time}}",accuracy:"准确度：{{percent}}%",filament:"{{weight}}g",layer:"{{count}} 层",layers:"{{count}} 层",object:"{{count}} 个对象",objects:"{{count}} 个对象",slicedFor:"为 {{model}} 切片",uploadedBy:"上传者",noPermissionReprint:"您没有重新打印的权限",noFileForReprint:"无可用的 3MF 文件 — 打印记录时无法从打印机下载该文件",noPermissionEdit:"您没有编辑归档的权限",noPermissionDelete:"您没有删除归档的权限",reprint:"重新打印",schedulePrint:"排程打印",schedule:"排程",openInBambuStudio:"在切片软件中打开",openInBambuStudioToSlice:"在切片软件中打开进行切片",slice:"切片",externalLink:"外部链接",makerWorld:"MakerWorld：{{designer}}",viewProject:"查看项目",noExternalLink:"无外部链接",preview3d:"3D 预览",download:"下载",edit:"编辑",delete:"删除"},modal:{deleteArchive:"删除归档",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',deleteButton:"删除",removeSource3mf:"移除源 3MF",removeSource3mfConfirm:'确定要从"{{name}}"中移除源 3MF 文件吗？这将删除原始切片项目文件。',removeButton:"移除",removeF3d:"移除 F3D",removeF3dConfirm:'确定要从"{{name}}"中移除 Fusion 360 设计文件吗？',removeTimelapse:"移除延时摄影",removeTimelapseConfirm:'确定要从"{{name}}"中移除延时摄影视频吗？',timelapse:"{{name}} - 延时摄影",selectTimelapse:"选择延时摄影",selectTimelapseDesc:"未找到自动匹配。请选择此打印的延时摄影：",deleteArchives:"删除归档",deleteArchivesConfirm:"确定要删除 {{count}} 个归档吗？此操作无法撤销。",deleteCount:"删除 {{count}} 个"},page:{title:"归档",printsCount:"{{filtered}} / {{total}} 次打印",dropFilesHere:"将 .3mf 文件拖放到此处",releaseToUpload:"释放以上传",only3mfSupported:"仅支持 .3mf 文件",close:"关闭",selected:"已选择 {{count}} 个",selectAll:"全选",tags:"标签",project:"项目",favorite:"收藏",delete:"删除",toggledFavorites:"已切换 {{count}} 个归档的收藏状态",failedUpdateFavorites:"更新收藏失败",archivesDeleted:"已删除 {{count}} 个归档",failedDeleteArchives:"删除归档失败",photoDeleted:"照片已删除",failedDeletePhoto:"删除照片失败"},list:{name:"名称",printer:"打印机",date:"日期",size:"大小",actions:"操作",hasTimelapse:"有延时摄影"},log:{date:"日期",printName:"打印名称",printer:"打印机",user:"用户",status:"状态",duration:"时长",filament:"耗材",allPrinters:"所有打印机",allUsers:"所有用户",allStatuses:"所有状态",cancelled:"已取消",skipped:"已跳过",dateFrom:"从",dateTo:"到",noEntries:"未找到打印日志条目",showing:"显示 {{count}} / {{total}} 条",rowsPerPage:"行数",page:"页",prev:"上一页",next:"下一页",clearLog:"清除日志",clearLogTitle:"清除打印日志",clearLogConfirm:"所有打印日志条目将被永久删除。归档和队列项目不受影响。此操作无法撤销。确定要继续吗？",clearLogButton:"全部清除",cleared:"已清除 {{count}} 条日志",clearFailed:"清除打印日志失败"}},queue:{title:"打印队列",subtitle:"排程和管理您的打印任务",addToQueue:"添加到队列",print:"打印",reprint:"重新打印",schedulePrint:"排程打印",editQueueItem:"编辑队列项目",printToPrinters:"打印到 {{count}} 台打印机",queueToPrinters:"排队到 {{count}} 台打印机",queueSelectedPlates:"将 {{count}} 个热床加入队列",selectAllPlates:"选择全部 {{count}} 个热床",deselectAll:"取消全选",printQueued:"已加入打印队列",itemsQueued:"{{count}} 个任务已加入队列",sending:"发送中...",sendingProgress:"发送中 {{current}}/{{total}}...",adding:"添加中...",addingProgress:"添加中 {{current}}/{{total}}...",savingProgress:"保存中 {{current}}/{{total}}...",clearQueue:"清空队列",clearHistory:"清除历史",emptyQueue:"队列为空",position:"位置",scheduledTime:"排程时间",moveUp:"上移",moveDown:"下移",startNow:"立即开始",printingInProgress:"打印进行中...",viewArchive:"查看归档",viewInFileManager:"在文件管理器中查看",itemCount:"{{count}} 个项目",itemCount_plural:"{{count}} 个项目",dragToReorder:"拖动以重新排序（仅限尽快）",reorderHint:'位置仅影响"尽快"项目。排程项目按设定时间运行。',sjf:{label:"SJF",tooltip:"最短任务优先 — 调度器优先处理较短的打印任务"},addedBy:"由 {{name}} 添加",nextInQueue:"队列中的下一个",clearPlateSuccess:"打印板已清理 — 准备进行下一个打印",plateNumber:"板 {{index}}",quantity:"数量",quantityHint:"创建 {{count}} 个队列项目",activeBatches:"活跃批次",batchProgress:"已完成 {{completed}}/{{total}}",cancelBatch:"取消剩余",batchCancelled:"已取消剩余批次项目",cancelBatchConfirmTitle:"取消批次",cancelBatchConfirmMessage:"取消此批次中所有剩余的待处理项目？",batch:"批次",sections:{currentlyPrinting:"正在打印",queued:"排队中",history:"历史"},status:{pending:"等待中",waiting:"等待中",printing:"打印中",paused:"已暂停",completed:"已完成",failed:"失败",skipped:"已跳过",cancelled:"已取消"},summary:{printing:"打印中",queued:"排队中",totalTime:"总队列时间",totalWeight:"总队列重量",history:"历史"},filter:{allPrinters:"所有打印机",unassigned:"未分配",allStatus:"所有状态",allLocations:"所有位置",any:"任意"},sort:{byPosition:"按位置排序",byName:"按名称排序",byPrinter:"按打印机排序",bySchedule:"按排程排序",byDate:"按日期排序",ascendingOldest:"升序（最旧优先）",descendingNewest:"降序（最新优先）"},badges:{staged:"已暂存",requiresPrevious:"需要前一个成功",autoPowerOff:"自动关机",gcodeInjection:"G-code"},empty:{title:"没有排程的打印",description:'从归档页面使用右键菜单中的"排程"选项来排程打印，或拖放文件开始。'},time:{asap:"尽快",overdue:"已逾期",now:"现在",lessThanMinute:"不到一分钟",inMinutes:"{{count}} 分钟后",inHours:"{{count}} 小时后"},actions:{stopPrint:"停止打印",startPrint:"开始打印",requeue:"重新排队"},bulkEdit:{title:"编辑 {{count}} 个项目",title_plural:"编辑 {{count}} 个项目",description:"仅更改的设置将应用于所选项目。",printer:"打印机",noChange:"— 不更改 —",queueOptions:"队列选项",staged:"暂存（手动开始）",autoPowerOff:"打印后自动关机",requirePrevious:"要求前一个成功",printOptions:"打印选项",bedLevelling:"热床调平",flowCalibration:"流量校准",vibrationCalibration:"振动校准",layerInspection:"首层检查",timelapse:"延时摄影",useAms:"使用 AMS",applyChanges:"应用更改",selectAll:"全选",deselectAll:"取消全选",selected:"已选择 {{count}} 个",editSelected:"编辑所选",cancelSelected:"取消所选"},confirm:{cancelTitle:"取消排程打印",cancelMessage:'确定要取消"{{name}}"吗？',stopTitle:"停止打印",stopMessage:'确定要停止当前打印"{{name}}"吗？这将取消打印机上的打印任务。',removeTitle:"从历史中移除",removeMessage:'确定要从队列历史中移除"{{name}}"吗？',clearHistoryTitle:"清除历史",clearHistoryMessage:"确定要从历史中移除所有 {{count}} 个项目吗？",cancelButton:"取消打印",stopButton:"停止打印",thisPrint:"此打印",thisItem:"此项目"},toast:{cancelled:"队列项目已取消",cancelFailed:"取消项目失败",removed:"队列项目已移除",removeFailed:"移除项目失败",stopped:"打印已停止",stopFailed:"停止打印失败",released:"打印已释放到队列",startFailed:"开始打印失败",reorderFailed:"重新排序队列失败",historyCleared:"已清除 {{count}} 条历史记录",clearHistoryFailed:"清除历史失败",updateFailed:"更新项目失败",bulkCancelled:"已取消 {{count}} 个项目",bulkCancelFailed:"批量取消项目失败"},timeline:{listView:"列表",timelineView:"时间线",unassigned:"未分配",noData:"当天没有计划的打印任务",allDoneBy:"所有打印预计在 {{time}} 前完成",staged:"暂存",filterAll:"全部显示",filterPrinting:"打印中",filterQueued:"排队中",time:{anyMoment:"即将完成",minutesLeft:"剩余{{minutes}}分钟",hoursLeft:"剩余{{hours}}小时",hoursMinutesLeft:"剩余{{hours}}小时{{minutes}}分钟"},day:{previous:"前一天",next:"后一天",today:"今天"}},permissions:{noStopPrint:"您没有停止打印的权限",noStartPrint:"您没有开始打印的权限",noEdit:"您没有编辑此队列项目的权限",noCancel:"您没有取消此队列项目的权限",noRequeue:"您没有重新排队的权限",noRemove:"您没有移除此队列项目的权限",noClearHistory:"您没有清除所有历史的权限",noEditItems:"您没有编辑队列项目的权限",noCancelItems:"您没有取消队列项目的权限"}},backgroundDispatch:{unknownFile:"未知文件",unknownPrinter:"未知打印机",startingPrints:"正在开始打印",progressSummary:"{{complete}}/{{total}} 完成 • 已分发：{{dispatched}} • 处理中：{{processing}}",expandDetails:"展开分发详情",collapseDetails:"收起分发详情",dismissToast:"关闭分发通知",cancelDispatchJob:"取消分发任务",cancel:"取消",cancelling:"取消中…",awaitingPrinter:"等待打印机…",status:{dispatched:"已分发",processing:"处理中",completed:"已完成",failed:"失败",cancelled:"已取消"},toast:{cancellingUpload:"取消上传中...",cancelled:"分发已取消",cancelFailed:"取消分发失败",completeWithFailures:"后台分发完成：{{completed}} 成功，{{failed}} 失败",completeSuccess:"后台分发完成：{{completed}} 成功",printStartedRemaining:"{{completed}} 个打印已开始，{{remaining}} 个正在发送..."}},stats:{title:"仪表板",subtitle:"拖动小部件以重新排列。点击眼睛图标隐藏。",overview:"概览",totalPrints:"总打印次数",successRate:"成功率",totalPrintTime:"总打印时间",printTime:"打印时间",totalFilament:"总耗材用量",filamentUsed:"耗材用量",filamentCost:"耗材成本",totalCost:"总成本",energyUsed:"能耗",energyCost:"能源成本",energyWarmingUpTooltip:"能耗追踪正在收集每小时快照。当所选范围之前至少存在一个快照时，时间段合计将变得准确。早期数值可能偏低。",averagePrintTime:"平均打印时间",printsPerDay:"每日打印次数",byPrinter:"按打印机",printsByPrinter:"各打印机打印次数",byMaterial:"按材料",byMonth:"按月份",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",allTime:"全部时间",quickStats:"快速统计",printActivity:"打印活动",filamentTypes:"耗材类型",filamentTrends:"耗材趋势",failureAnalysis:"失败分析",timeAccuracy:"时间准确度",successful:"成功：",failed:"失败：",perfectEstimate:"100% = 完美估计",noTimeAccuracyData:"暂无时间准确度数据",noFilamentData:"暂无耗材数据",noPrinterData:"暂无打印机数据",noPrintData:"暂无打印数据",noPrintDataLast30Days:"最近 30 天无打印数据",failureReasons:"失败原因",topFailureReasons:"主要失败原因",failedPrintsCount:"{{failed}} / {{total}} 次打印失败",lastWeekRate:"上周：{{rate}}%",resetLayout:"重置布局",recalculateCosts:"重新计算成本",recalculateCostsHint:"使用当前耗材价格重新计算所有归档成本",exportStats:"导出统计",exportAsCsv:"导出为 CSV",exportAsExcel:"导出为 Excel",hiddenCount:"{{count}} 个已隐藏",exportDownloaded:"导出已下载",exportFailed:"导出失败",layoutReset:"布局已重置",recalculatedCosts:"已为 {{count}} 个归档重新计算成本",recalculateFailed:"重新计算成本失败",loadingStats:"加载统计数据中...",noPermissionResetLayout:"您没有重置布局的权限",noPermissionRecalculate:"您没有重新计算成本的权限",noPrintDataInRange:"所选范围内无打印数据",periodFilament:"期间耗材",periodCost:"期间成本",avgPerPrint:"每次打印平均",usageOverTime:"随时间的使用量",filamentByWeight:"重量",printDuration:"打印时长",printerUtilization:"打印机利用率",filamentSuccess:"按材料成功率",printHabits:"打印习惯",printTimeOfDay:"打印时段",colorDistribution:"颜色分布",noColorData:"暂无颜色数据",records:"记录",longestPrint:"最长打印",heaviestPrint:"最重打印",mostExpensivePrint:"最贵打印",busiestDay:"最忙碌的一天",successStreak:"连续成功",streakPrint:"连续打印",streakPrints:"{{count}} 次连续打印",printerStats:"打印机统计",hours:"小时",avgPrints:"平均打印",noArchiveData:"暂无打印数据",filamentByTime:"时间",avgWeight:"平均重量",avgTime:"平均时间",filamentByPrints:"打印次数",timeframe:{today:"今天","this-week":"本周","this-month":"本月","last-7":"最近 7 天","last-30":"最近 30 天","last-90":"最近 90 天","this-year":"今年","all-time":"全部时间",custom:"自定义范围",from:"从",to:"到"},allUsers:"所有用户",noUser:"无用户（系统）",filterByUser:"按用户筛选"},maintenance:{title:"维护",overview:"概览",allOk:"所有维护均已完成",dueCount:"{{count}} 项到期",dueCount_plural:"{{count}} 项到期",warningCount:"{{count}} 个警告",warningCount_plural:"{{count}} 个警告",totalPrintTime:"总打印时间",nextMaintenance:"下次维护",nothingDue:"无到期项目",tasks:"任务",lastPerformed:"上次执行",interval:"间隔",hoursRemaining:"剩余 {{hours}} 小时",hoursOverdue:"逾期 {{hours}} 小时",markDone:"标记为完成",performMaintenance:"执行维护",history:"历史",noHistory:"无维护历史",editPrintHours:"编辑打印时间",currentHours:"当前小时数",statusTab:"状态",settingsTab:"设置",overdueCount:"{{count}} 个逾期",dueSoonCount:"{{count}} 个即将到期",dueSoon:"即将到期",allGood:"一切正常",overdueBy:"逾期 {{duration}}",dueIn:"{{duration}} 后到期",timeLeft:"剩余 {{duration}}",day:"1 天",days:"{{count}} 天",week:"1 周",weeks:"{{count}} 周",month:"1 个月",months:"{{count}} 个月",year:"1 年",maintenanceTypes:"维护类型",maintenanceTypesDescription:"系统类型和您的自定义维护任务",addCustomType:"添加自定义类型",restoreDefaults:"恢复默认任务",intervalType:"间隔类型",intervalValue:"间隔 ({{type}})",icon:"图标",documentationLink:"文档链接（可选）",assignToPrinters:"分配给打印机",selectAtLeastOnePrinter:"至少选择一台打印机",addType:"添加类型",custom:"自定义",printHours:"打印小时数",calendarDays:"日历天数",exampleName:"例如：更换 HEPA 过滤器",viewDocumentation:"查看文档",timeBasedInterval:"基于时间的间隔",intervalOverrides:"间隔覆盖",intervalOverridesDescription:"为特定打印机自定义间隔",assignedToPrinters:"已分配给打印机：",noPrintersAssigned:"未分配打印机",addPrinterShort:"添加：",printersAssignedClick:"已分配 {{count}} 台打印机 - 点击管理",removeFromPrinter:"从此打印机移除",types:{lubricateCarbonRods:"润滑碳纤维杆",lubricateRails:"润滑线性导轨",cleanNozzle:"清洁喷嘴/热端",checkBelts:"检查皮带张力",cleanBuildPlate:"清洁构建板",checkExtruder:"检查挤出机齿轮",checkCooling:"检查冷却风扇",generalInspection:"综合检查",cleanCarbonRods:"清洁碳纤维杆",lubricateSteelRods:"润滑钢杆",cleanSteelRods:"清洁钢杆",cleanLinearRails:"清洁线性导轨",checkPtfeTube:"检查 PTFE 管",replaceHepaFilter:"更换 HEPA 过滤器",replaceCarbonFilter:"更换活性炭过滤器",lubricateLeftNozzleRail:"润滑左喷嘴导轨"},maintenanceComplete:"维护已标记为完成",typeUpdated:"维护类型已更新",typeDeleted:"维护类型已删除",defaultsRestored:"已恢复 {{count}} 个默认任务",printHoursUpdated:"打印小时数已更新",printerAssigned:"打印机已分配",printerRemoved:"打印机已移除",deleteTypeConfirm:'删除"{{name}}"？',deleteSystemTypeTitle:"删除默认维护任务？",deleteSystemTypeMessage:'确定要删除默认维护任务"{{name}}"吗？',noPermissionUpdate:"您没有更新维护项目的权限",noPermissionPerform:"您没有执行维护的权限",noPermissionEditTypes:"您没有编辑维护类型的权限",noPermissionDeleteTypes:"您没有删除维护类型的权限",noPermissionEditHours:"您没有编辑打印时间的权限",noPermissionRemovePrinter:"您没有移除打印机分配的权限",noPermissionAssignPrinter:"您没有分配打印机的权限",noPermissionEditIntervals:"您没有编辑间隔的权限",configureSettings:"配置维护类型和间隔"},settings:{title:"设置",general:"通用",tabs:{general:"通用",smartPlugs:"智能插座",notifications:"通知",queue:"工作流",filament:"耗材",network:"网络",apiKeys:"API 密钥",virtualPrinter:"虚拟打印机",spoolbuddy:"SpoolBuddy",failureDetection:"故障检测",users:"身份验证",backup:"备份",emailAuth:"邮箱认证",ldap:"LDAP",twoFa:"双因素认证",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy 设备",infoBody:"SpoolBuddy kiosk 通过心跳自动注册。如果设备不再使用，或守护进程崩溃遗留了陈旧的重复项，可在此注销。",duplicatesTitle:"已注册 {{count}} 台设备",duplicatesBody:"kiosk 界面只使用最先注册的设备。如果其中有因崩溃遗留的陈旧重复项，请注销它——在线设备会在下次心跳时重新注册自己。",empty:"尚未注册任何 SpoolBuddy 设备。",online:"在线",offline:"离线",unregister:"注销",unregisterSuccess:"设备已注销",unregisterError:"注销设备失败",confirmTitle:"注销 SpoolBuddy 设备？",confirmBody:'将从数据库中移除 "{{hostname}}" ({{deviceId}})。如果设备在线，会在下次心跳时重新注册自己。',ipAddress:"IP 地址",firmware:"固件",lastSeen:"上次在线",daemonUptime:"守护进程运行时间",systemUptime:"系统运行时间",never:"从未",nfc:"NFC",scale:"秤",cpuTemp:"CPU 温度",memory:"内存",disk:"磁盘",update:"更新",updateConfirmTitle:"更新 SpoolBuddy 守护进程？",updateConfirmBody:'对 "{{hostname}}" 触发软件更新？更新完成后守护进程将重启。',restartBrowser:"重启浏览器",restartBrowserConfirmTitle:"重启 kiosk 浏览器？",restartBrowserConfirmBody:'在 "{{hostname}}" 上重启 kiosk 浏览器？显示将短暂黑屏。',restartDaemon:"重启守护进程",restartDaemonConfirmTitle:"重启 SpoolBuddy 守护进程？",restartDaemonConfirmBody:'在 "{{hostname}}" 上重启 SpoolBuddy 守护进程？设备将离线几秒钟。',reboot:"重启",rebootConfirmTitle:"重启设备？",rebootConfirmBody:'重启 "{{hostname}}"？设备将离线约一分钟。',shutdown:"关机",shutdownConfirmTitle:"关闭设备？",shutdownConfirmBody:'关闭 "{{hostname}}"？您需要物理访问才能重新开机。',commandConfirm:"确认",commandQueued:"命令已加入队列",commandError:"发送命令失败"},ldap:{title:"LDAP 认证",enabledDesc:"LDAP 认证已启用",disabledDesc:"LDAP 认证已禁用",disabledHint:"在下方配置并保存 LDAP 设置，然后启用。",enabled:"LDAP 认证已启用",disabled:"LDAP 认证已禁用",feature1:"用户可以使用 LDAP 凭据登录",feature2:"本地管理员帐户作为后备保留",feature3:"登录时 LDAP 组映射到 BamBuddy 组",serverConfig:"LDAP 服务器配置",serverUrl:"服务器 URL",serverUrlHint:"使用 ldap:// 进行标准连接或 ldaps:// 进行 SSL 连接",security:"安全",securityHint:"StartTLS 将普通连接升级为 TLS。LDAPS 从一开始就使用 TLS。",bindDn:"绑定 DN（服务帐户）",bindPassword:"绑定密码",searchBase:"搜索基础 DN",userFilter:"用户搜索过滤器",userFilterHint:"{username} 替换为登录用户名。OpenLDAP 使用 (uid={username})。",autoProvision:"自动创建用户",autoProvisionHint:"首次 LDAP 登录时自动创建 BamBuddy 帐户",defaultGroup:"默认组",defaultGroupNone:"— 无（无回退）—",defaultGroupHint:"当 LDAP 用户通过身份验证但不在任何已映射的 LDAP 组中时分配的回退组。留空以使未映射的用户没有权限。",groupMapping:"组映射（JSON）",groupMappingHint:"将 LDAP 组 DN 映射到 BamBuddy 组。可用组：",testConnection:"测试连接",settingsSaved:"LDAP 设置已保存",errors:{serverRequired:"LDAP 服务器 URL 为必填项",searchBaseRequired:"搜索基础 DN 为必填项",enableAuthFirst:"请先启用认证",configureLdapFirst:"请先保存 LDAP 设置"}},email:{smtpSettings:"SMTP 配置",smtpHost:"SMTP 服务器",smtpPort:"SMTP 端口",security:"安全",authentication:"认证",username:"用户名",password:"密码",fromEmail:"发件邮箱",fromName:"发件人名称",testConnection:"测试 SMTP 连接",testRecipient:"测试收件邮箱",sendTest:"发送测试邮件",sending:"发送中...",save:"保存设置",saving:"保存中...",advancedAuth:"高级认证",advancedAuthEnabled:"高级认证已启用",advancedAuthEnabledDesc:"基于邮箱的用户管理功能已激活。新用户将通过邮件收到自动生成的密码，用户可以通过忘记密码功能重置密码。",advancedAuthDisabled:"高级认证已禁用",advancedAuthDisabledDesc:"启用高级认证以激活基于邮箱的用户管理功能。",enable:"启用",disable:"禁用",feature1:"密码自动生成并通过邮件发送给新用户",feature2:"用户可以使用用户名或邮箱登录",feature3:"忘记密码功能可用",feature4:"管理员可以通过邮件重置用户密码",errors:{requiredFields:"请填写所有必填字段",usernameRequired:"启用认证时需要用户名",enterTestEmail:"请输入测试邮箱地址",smtpServerAndEmail:"测试前请填写 SMTP 服务器和发件邮箱",usernamePasswordRequired:"启用认证时需要用户名和密码",configureSmtpFirst:"请先配置并测试 SMTP 设置",enableAuthFirst:"请先启用身份验证才能使用基于电子邮件的功能。"},success:{settingsSaved:"SMTP 设置保存成功"},securityOptions:{starttls:"STARTTLS（端口 587）",ssl:"SSL/TLS（端口 465）",none:"无（端口 25）"},authOptions:{enabled:"已启用",disabled:"已禁用"}},appearance:"外观",notifications:"通知",smartPlugs:"智能插座",spoolman:"Spoolman",updates:"更新",language:"语言",languageDescription:"选择您的首选语言",theme:"主题",themeLight:"浅色",themeDark:"深色",themeSystem:"跟随系统",defaultView:"默认视图",defaultViewDescription:"打开应用时显示的页面",checkForUpdates:"检查更新",autoUpdate:"自动更新",currentVersion:"当前版本",latestVersion:"最新版本",upToDate:"已是最新版本",updateAvailable:"有可用更新",notificationLanguage:"通知语言",notificationLanguageDescription:"推送通知的语言",bedCooledThreshold:"热床冷却阈值",bedCooledThresholdDescription:"打印后热床被视为已冷却的温度",userNotificationsEnabled:"用户通知",userNotificationsEnabledDescription:"启用用户通知菜单和打印任务事件的邮件通知。需要高级身份验证。",userNotificationsDisabledHint:"请启用高级身份验证以使用用户通知。",notificationProviders:"通知提供商",addProvider:"添加提供商",editProvider:"编辑提供商",providerType:"提供商类型",testNotification:"测试通知",testSuccess:"测试通知发送成功",testFailed:"发送测试通知失败",quietHours:"免打扰时间",quietHoursDescription:"在此时间段内不发送通知",quietHoursStart:"开始",quietHoursEnd:"结束",events:{title:"通知事件",printStart:"打印开始",printComplete:"打印完成",printFailed:"打印失败",printStopped:"打印停止",printProgress:"进度里程碑",printProgressDescription:"在 25%、50%、75% 时通知",printerOffline:"打印机离线",printerError:"打印机错误",filamentLow:"耗材不足",maintenanceDue:"维护到期",maintenanceDueDescription:"需要维护时通知"},smartPlug:{title:"智能插座",add:"添加智能插座",edit:"编辑智能插座",name:"名称",ipAddress:"IP 地址",linkedPrinter:"关联打印机",autoOn:"自动开启",autoOnDescription:"打印开始时开启",autoOff:"自动关闭",autoOffDescription:"打印完成后关闭",offDelay:"关闭延迟",offDelayMinutes:"打印后分钟数",offDelayTemp:"当喷嘴温度低于",currentState:"当前状态",turnOn:"开启",turnOff:"关闭"},filamentTracking:"耗材追踪",filamentTrackingDesc:"选择如何追踪您的耗材。您可以使用内置库存或连接外部 Spoolman 服务器。",filamentChecks:"耗材检查",disableFilamentWarnings:"禁用耗材警告",disableFilamentWarningsDesc:"在打印或加入队列时不显示耗材不足警告",preferLowestFilament:"优先使用剩余最少的耗材",preferLowestFilamentDesc:"当多个料盘匹配时，使用剩余耗材最少的那个",trackingModeBuiltIn:"内置库存",trackingModeBuiltInDesc:"包含 RFID 自动匹配和用量追踪",trackingModeSpoolmanDesc:"外部耗材管理服务器",builtInFeatureRfid:"自动检测 AMS 中的拓竹 RFID 耗材",builtInFeatureUsage:"追踪每次打印的耗材消耗",builtInFeatureCatalog:"管理耗材、颜色和 K 值配置文件",builtInFeatureThirdParty:"第三方耗材可分配到库存耗材",amsSyncButton:"从 AMS 同步重量",amsSyncTitle:"从 AMS 同步耗材重量",amsSyncMessage:"这将使用已连接打印机的当前 AMS 剩余百分比值覆盖所有库存耗材重量。用于从损坏的重量数据中恢复。打印机必须在线。",amsSyncing:"同步中...",amsSyncSuccess:"已同步 {{synced}} 个耗材，跳过 {{skipped}} 个",amsSyncError:"从 AMS 同步重量失败",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman 服务器的 URL（例如 http://localhost:7912）",spoolmanConnected:"已连接",spoolmanDisconnected:"未连接",status:"状态",connect:"连接",disconnect:"断开",howSyncWorks:"同步工作原理",syncInfoRfidOnly:"仅同步带有 RFID 的官方拓竹耗材",syncInfoAutoCreate:"首次同步时自动在 Spoolman 中创建新耗材",syncInfoThirdPartySkipped:"非拓竹耗材（第三方、重新填充的）将被跳过",linkingExistingSpools:"链接现有耗材",linkingExistingSpoolsDesc:'要将现有的 Spoolman 耗材链接到您的 AMS，请将鼠标悬停在 AMS 槽位上并点击"链接到 Spoolman"。',syncMode:"同步模式",syncModeAuto:"自动",syncModeManual:"仅手动",syncModeAutoDesc:"检测到更改时自动同步 AMS 数据",syncModeManualDesc:"仅在手动触发时同步",syncAmsData:"同步 AMS 数据",syncAmsDataDesc:"手动将打印机 AMS 数据同步到 Spoolman",allPrinters:"所有打印机",noDefaultPrinter:"无默认（每次询问）",sidebarOrder:"侧边栏顺序",saveThumbnails:"保存缩略图",captureFinishPhoto:"拍摄完成照片",noPrintersConfigured:"未配置打印机",archiveMode:{always:"始终创建归档条目",never:"从不创建归档条目",ask:"每次询问"},checkForUpdatesLabel:"检查更新",checkPrinterFirmware:"检查打印机固件",includeBetaUpdates:"包含测试版本",includeBetaUpdatesDesc:"检查更新时通知测试版和预发布版本",enableRetry:"启用重试",homeAssistantDescription:"通过 Home Assistant 控制智能插座",environmentManagedLabel:"（环境变量管理）",autoEnabledViaEnv:"通过环境变量自动启用",urlFromEnvReadOnly:"值由 HA_URL 环境变量设置（只读）",tokenFromEnvReadOnly:"值由 HA_TOKEN 环境变量设置（只读）",mqttConnectedTo:"已连接到",prometheusDescription:"以 Prometheus 格式暴露打印机数据",noSmartPlugsTitle:"未配置智能插座",noSmartPlugsDescription:"添加基于 Tasmota 的智能插座以追踪能耗并自动化电源控制。",noProvidersTitle:"未配置提供商",noProvidersDescription:"添加提供商以接收警报。",noTemplatesAvailable:"无可用模板。重启后端以加载默认模板。",apiPermissionView:"查看打印机状态和队列",apiPermissionEdit:"添加和移除打印队列中的项目",apiKeysEmptyTitle:"无 API 密钥",apiKeysEmptyDescription:"创建 API 密钥以与外部服务集成。",noUsersFound:"未找到用户",noGroupsFound:"未找到组",noGroupsAvailable:"无可用组",passwordsDoNotMatch:"密码不匹配",systemGroupWarning:"系统组名称不可更改",authDisabledTitle:"身份验证已禁用",authDisabledFeature1:"需要登录才能访问系统",authDisabledFeature2:"创建多个用户并基于组的权限管理",authDisabledFeature3:"使用 50+ 个细粒度权限控制访问",userHasCreated:"此用户已创建：",userItemsQuestion:"您想如何处理这些项目？",deleteUserConfirm:"确定要删除此用户吗？",actionCannotBeUndone:"此操作无法撤销。",addFirstSmartPlug:"添加您的第一个智能插座",providers:"提供商",log:"日志",testAll:"全部测试",testResults:"测试结果",testPassedCount:"{{count}} 个通过",testFailedCount:"{{count}} 个失败",messageTemplates:"消息模板",messageTemplatesDescription:"自定义每个事件的通知消息。",apiKeys:"API 密钥",apiKeysDescription:"创建 API 密钥用于外部集成和 Webhook。",createKey:"创建密钥",apiKeyCreated:"API 密钥创建成功",apiKeyCopyWarning:"请立即复制此密钥 - 它不会再次显示！",useInApiBrowser:"在 API 浏览器中使用",createNewApiKey:"创建新 API 密钥",keyName:"密钥名称",keyNamePlaceholder:"例如：Home Assistant、OctoPrint",readStatus:"读取状态",readStatusDescription:"查看打印机状态和队列",manageQueue:"管理队列",manageQueueDescription:"添加和移除打印队列中的项目",controlPrinter:"控制打印机",controlPrinterDescription:"暂停、继续和停止打印",unnamedKey:"未命名密钥",lastUsed:"上次使用",read:"读取",control:"控制",createFirstKey:"创建您的第一个密钥",webhookEndpoints:"Webhook 端点",webhookApiKeyHint:"在 X-API-Key 请求头中使用您的 API 密钥。",webhook:{getAllStatus:"获取所有打印机状态",getSpecificStatus:"获取特定打印机状态",addToQueue:"添加到打印队列",pausePrint:"暂停打印",resumePrint:"继续打印",stopPrint:"停止打印"},apiBrowser:"API 浏览器",apiBrowserDescription:"浏览和测试所有可用的 API 端点。",apiKeyForTesting:"测试用 API 密钥",apiKeyPlaceholder:"在此粘贴您的 API 密钥以测试需要认证的端点...",apiKeyHint:"此密钥将作为 X-API-Key 请求头随请求发送。",deleteApiKeyTitle:"删除 API 密钥",deleteApiKeyMessage:"确定要删除此 API 密钥吗？使用此密钥的所有集成将停止工作。",deleteKey:"删除密钥",amsDisplayThresholds:"AMS 显示阈值",amsThresholdsDescription:"配置 AMS 湿度和温度指示器的颜色阈值。",humidity:"湿度",goodGreen:"良好（绿色）",fairOrange:"一般（橙色）",aboveFairBad:"超过一般阈值显示为红色（差）",fairAlsoDryingThreshold:"此阈值也用于触发自动干燥",temperature:"温度",goodBlue:"良好（蓝色）",aboveFairHot:"超过一般阈值显示为红色（热）",historyRetention:"历史保留",keepSensorHistory:"保留传感器历史",historyRetentionDescription:"较旧的湿度和温度数据将被自动删除",defaultPrintOptions:"默认打印选项",defaultPrintOptionsDescription:"设置新打印的默认选项值。可在打印对话框中逐次覆盖。",defaultBedLevelling:"热床调平",defaultBedLevellingDesc:"打印前自动调平热床",defaultFlowCali:"流量校准",defaultFlowCaliDesc:"校准挤出流量",defaultVibrationCali:"振动校准",defaultVibrationCaliDesc:"减少振纹伪影",defaultLayerInspect:"首层检测",defaultLayerInspectDesc:"AI首层检测",defaultTimelapse:"延时摄影",defaultTimelapseDesc:"录制延时摄影视频",staggeredStart:"Staggered Start",staggeredStartDescription:"Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.",plateClear:"热床清空确认",requirePlateClear:"需要热床清空确认",requirePlateClearDescription:"启用后，调度器会在已完成打印的打印机上启动排队打印之前，等待每台打印机的热床清空确认。禁用后，也会隐藏打印机卡片上的打印板状态标记和“将打印板标记为已清理”按钮。",gcodeInjection:"G-code注入",gcodeInjectionDescription:'为Farmloop、SwapMod、AutoClear和Printflow 3D等自动打印系统配置自定义G-code，在打印开始和/或结束时注入。代码片段按打印机型号配置，在队列项目上启用"注入G-code"时应用。',gcodeInjectionNoPrinters:"未找到打印机。添加打印机以配置G-code代码片段。",gcodeStartLabel:"开始G-code",gcodeEndLabel:"结束G-code",gcodeStartPlaceholder:"在打印开始前插入的G-code...",gcodeEndPlaceholder:"在打印结束后追加的G-code...",staggerGroupSize:"Group size",staggerGroupSizeHelp:"Printers to start simultaneously per group",staggerInterval:"Interval (minutes)",staggerIntervalHelp:"Delay between each group starting",queueDrying:"自动干燥",queueDryingDescription:"在队列打印之间，打印机空闲时自动干燥AMS耗材。使用上方的湿度阈值触发干燥。",queueDryingEnabled:"启用自动干燥",queueDryingEnabledDescription:"当打印机空闲且湿度超过阈值时，自动启动AMS干燥",queueDryingBlock:"等待干燥完成",queueDryingBlockDescription:"阻止打印队列直到干燥完成。关闭时，打印优先于干燥。",ambientDryingEnabled:"环境干燥",ambientDryingEnabledDescription:"当空闲打印机的湿度超过阈值时自动干燥耗材，无需排队打印。",dryingPresets:"干燥预设",dryingPresetsDescription:"每种耗材类型的温度和时长。AMS 2 Pro使用较低温度，AMS-HT支持较高温度。",dryingFilament:"耗材",printModal:"打印对话框",expandCustomMapping:"默认展开自定义映射",expandCustomMappingDescription:"打印到多台打印机时，默认展开显示每台打印机的 AMS 映射",authentication:"身份验证",authEnabledDescription:"您的实例已通过用户身份验证保护",authDisabledDescription:"启用以要求登录并管理用户访问",authDisabledMessage:"启用身份验证以创建用户账户、管理权限并保护您的 Bambuddy 实例。",enableAuthentication:"启用身份验证",currentUser:"当前用户",changePassword:"修改密码",admin:"管理员",users:"用户",addUser:"添加用户",groups:"组",addGroup:"添加组",system:"系统",noDescription:"无描述",userCount:"{{count}} 个用户",permissionCount:"{{count}} 个权限",createUser:"创建用户",username:"用户名",enterUsername:"输入用户名",password:"密码",enterPassword:"输入密码（至少 6 个字符）",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认密码",viewReleaseOnGitHub:"在 GitHub 上查看发布",turnAllPlugsOn:"开启所有插座",turnAllPlugsOff:"关闭所有插座",clearNotificationLogs:"清除通知日志",clearLogsMessage:"这将永久删除所有 30 天前的通知日志。此操作无法撤销。",clearLogs:"清除日志",resetUiPreferences:"重置 UI 偏好",resetUiPreferencesMessage:"这将重置所有 UI 偏好为默认值：侧边栏顺序、主题、仪表板布局、视图模式和排序偏好。您的打印机、归档和服务器设置不会受到影响。清除后页面将重新加载。",resetPreferences:"重置偏好",deleteGroupTitle:"删除组",deleteGroupMessage:"确定要删除此组吗？此组中的用户将失去这些权限。",deleteGroup:"删除组",disableAuthenticationTitle:"禁用身份验证",disableAuthenticationMessage:"确定要禁用身份验证吗？这将使您的 Bambuddy 实例无需登录即可访问。所有用户将保留在数据库中但身份验证将被禁用。",disableAuthentication:"禁用身份验证",configureBambuddy:"配置 Bambuddy",systemDefault:"系统默认",archiveSettings:"归档设置",newWindow:"新窗口",embeddedOverlay:"嵌入式叠加层",preferredSlicer:"首选切片软件",preferredSlicerDescription:"选择要用于打开文件的切片软件",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"外部摄像头",costTracking:"成本追踪",printsOnly:"仅打印",totalConsumption:"总消耗",dataManagement:"数据管理",storageUsage:"存储使用情况",storageUsageDescription:"按类别的数据使用情况明细",storageUsageTotal:"总计",storageUsageErrors:"错误",storageUsageOtherBreakdown:"其他（包括静态资源、脚本和配置文件）",storageUsageSystem:"系统",storageUsageData:"数据",storageUsageUnavailable:"存储使用信息不可用",clearNotificationLogsDescription:"删除 30 天前的通知日志",resetUiPreferencesDescription:"重置侧边栏顺序、主题、视图模式和布局偏好。打印机、归档和设置不受影响。",enableHomeAssistant:"启用 Home Assistant",enableMqtt:"启用 MQTT",useTls:"使用 TLS",enableMetricsEndpoint:"启用指标端点",availableMetrics:"可用指标",editUser:"编辑用户",deleteUserTitle:"删除用户",groupName:"组名称",leaveEmptyForAnonymous:"留空为匿名",leaveEmptyForNoAuth:"留空为无认证",enterNewPassword:"输入新密码",confirmNewPassword:"确认新密码",enterGroupName:"输入组名称",enterDescriptionOptional:"输入描述（可选）",enterCurrentPassword:"输入当前密码",enterNewPasswordMin6:"输入新密码（至少 6 个字符）",toast:{keyCopied:"密钥已复制到剪贴板",copyFailed:"复制密钥失败",keyAddedToBrowser:"密钥已添加到 API 浏览器",clearLogsFailed:"清除日志失败",uiPreferencesReset:"UI 偏好已重置。刷新中...",authDisabled:"身份验证已成功禁用",authDisableFailed:"禁用身份验证失败",apiKeyCreated:"API 密钥已创建",apiKeyDeleted:"API 密钥已删除",userCreated:"用户创建成功",userUpdated:"用户更新成功",userDeleted:"用户删除成功",groupCreated:"组创建成功",groupUpdated:"组更新成功",groupDeleted:"组删除成功",fillRequiredFields:"请填写所有必填字段",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符",enterGroupName:"请输入组名称",settingsSaved:"设置已保存",noPermissionUpdate:"您没有权限更改设置",cameraSettingsSaved:"摄像头设置已保存",enterCameraUrl:"请输入摄像头 URL",passwordChanged:"密码修改成功",connectionFailed:"连接失败",testFailed:"测试失败",cameraConnected:"摄像头已连接{{resolution}}"},testConnection:"测试连接",catalog:{spoolCatalog:"耗材目录",spoolCatalogDescription:"按品牌/类型的空耗材重量。用于添加耗材时的自动重量查找。",searchCatalog:"搜索目录...",addNewEntry:"添加新条目",namePlaceholder:"名称（例如：Bambu Lab - 塑料）",weight:"重量",type:"类型",default:"默认",custom:"自定义",noMatch:"没有条目匹配您的搜索",empty:"目录中没有条目",deleteEntry:"删除条目",deleteConfirm:'确定要删除"{{name}}"吗？',resetCatalog:"重置目录",resetConfirm:"重置目录为默认值？这将移除所有自定义条目。",loadFailed:"加载耗材目录失败",nameWeightRequired:"名称和重量为必填项",entryAdded:"条目已添加",addFailed:"添加条目失败",entryUpdated:"条目已更新",updateFailed:"更新条目失败",entryDeleted:"条目已删除",deleteFailed:"删除条目失败",resetSuccess:"目录已重置为默认值",resetFailed:"重置目录失败",exported:"已导出 {{count}} 条",imported:"已导入 {{added}} 条（跳过 {{skipped}} 条）",importFailed:"导入失败：无效的 JSON 格式",exportTooltip:"导出目录为 JSON",importTooltip:"从 JSON 导入目录",resetTooltip:"重置为默认值",selectedCount:"已选择 {{count}} 项",deleteSelected:"删除所选",bulkDeleteConfirm:"确定要删除 {{count}} 个条目吗？",bulkDeleted:"已删除 {{count}} 个条目",bulkDeleteFailed:"删除条目失败"},colorCatalog:{title:"颜色目录",description:"按制造商/材料的耗材颜色。用于添加耗材时的自动颜色查找。",searchColors:"搜索颜色...",allManufacturers:"所有制造商",addNewColor:"添加新颜色",manufacturer:"制造商",colorName:"颜色名称",hex:"十六进制",materialOptional:"材料（可选）",showing:"显示 {{filtered}} / {{total}} 种颜色",noMatch:"没有颜色匹配您的搜索",empty:"目录中没有颜色",deleteColor:"删除颜色",deleteConfirm:'确定要删除"{{name}}"吗？',resetCatalog:"重置颜色目录",resetConfirm:"重置目录为默认值？这将移除所有自定义颜色。",sync:"同步",starting:"启动中...",syncTooltip:"从 FilamentColors.xyz 同步（2000+ 种颜色，可能需要一分钟）",loadFailed:"加载颜色目录失败",fieldsRequired:"制造商、颜色名称和十六进制颜色为必填项",colorAdded:"颜色已添加",addFailed:"添加颜色失败",colorUpdated:"颜色已更新",updateFailed:"更新颜色失败",colorDeleted:"颜色已删除",deleteFailed:"删除颜色失败",resetSuccess:"颜色目录已重置为默认值",resetFailed:"重置目录失败",syncUpToDate:"已是最新（检查了 {{count}} 种颜色）",syncComplete:"添加了 {{added}} 种新颜色（{{skipped}} 种已存在）",syncError:"同步错误",syncFailed:"从 FilamentColors.xyz 同步失败",exported:"已导出 {{count}} 种颜色",imported:"已导入 {{added}} 种颜色（跳过 {{skipped}} 种）",importFailed:"导入失败：无效的 JSON 格式",selectedCount:"已选择 {{count}} 项",deleteSelected:"删除所选",bulkDeleteConfirm:"确定要删除 {{count}} 种颜色吗？",bulkDeleted:"已删除 {{count}} 种颜色",bulkDeleteFailed:"删除颜色失败"},dateFormat:"日期格式",dateFormatUs:"美式 (MM/DD/YYYY)",dateFormatEu:"欧式 (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"时间格式",timeFormat12:"12小时制 (3:30 PM)",timeFormat24:"24小时制 (15:30)",defaultPrinter:"默认打印机",defaultPrinterDescription:"为上传、重印和其他操作预选此打印机。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"拖拽侧边栏项目以重新排序。在此处重置为默认顺序。",setDefault:"设为默认",sidebarOrderSetDefaultHint:"设为默认将当前菜单顺序应用于尚未自定义的用户。",sidebarDefaultSet:"已设置默认菜单顺序。",sidebarDefaultCleared:"已清除默认菜单顺序。",sidebarDefaultFailed:"设置默认菜单顺序失败。",reset:"重置",darkMode:"深色模式",lightMode:"浅色模式",active:"(当前)",background:"背景",accent:"强调色",style:"样式",bgNeutral:"中性",bgWarm:"暖色",bgCool:"冷色",bgOled:"OLED 纯黑",bgSlate:"石板蓝",bgForest:"森林绿",accentGreen:"绿色",accentTeal:"青色",accentBlue:"蓝色",accentOrange:"橙色",accentPurple:"紫色",accentRed:"红色",styleClassic:"经典",styleGlow:"发光",styleVibrant:"鲜艳",themeToggleHint:"使用侧边栏中的太阳/月亮图标在深色和浅色模式之间切换。",autoArchivePrints:"自动归档打印",autoArchiveDescription:"打印完成时自动保存3MF文件",saveThumbnailsDescription:"从3MF文件中提取并保存预览图像",captureFinishPhotoDescription:"打印完成时从打印机摄像头拍照",ffmpegNotInstalled:"未安装ffmpeg",ffmpegRequired:"摄像头捕获需要ffmpeg。通过 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安装。",camera:"摄像头",cameraViewMode:"摄像头查看模式",cameraOverlayDescription:"摄像头在主屏幕上以可调大小的覆盖层打开",cameraWindowDescription:"摄像头在单独的浏览器窗口中打开",externalCamerasDescription:"配置外部摄像头以替换内置打印机摄像头。支持MJPEG流、RTSP、HTTP快照和USB摄像头（V4L2）。启用后，外部摄像头将用于实时查看和完成照片。",cameraPlaceholderUsb:"设备路径 (/dev/video0)",cameraPlaceholderUrl:"摄像头URL (rtsp://... 或 http://...)",cameraTypeMjpeg:"MJPEG 流",cameraTypeRtsp:"RTSP 流",cameraTypeSnapshot:"HTTP 快照",cameraTypeUsb:"USB 摄像头 (V4L2)",cameraRotation:"旋转",test:"测试",connected:"已连接",disconnected:"未连接",currency:"货币",defaultFilamentCost:"默认耗材成本（每公斤）",electricityCost:"每千瓦时电费",energyDisplayMode:"能源显示模式",energyModePrintDescription:"仪表板显示打印期间使用的能源总和",energyModeTotalDescription:"仪表板显示智能插座的累计能源",fileManager:"文件管理器",createArchiveEntry:"打印时创建归档条目",createArchiveEntryDescription:"从文件管理器打印时，可选择创建归档条目",lowDiskSpaceWarning:"磁盘空间不足警告",lowDiskSpaceDescription:"当可用磁盘空间低于此阈值时显示警告",printerFirmware:"打印机固件",checkFirmwareDescription:"检查Bambu Lab的打印机固件更新",bambuddySoftware:"Bambuddy 软件",autoCheckDescription:"启动时自动检查新版本",checkNow:"立即检查",updateAvailableVersion:"可用更新：v{{version}}",releaseNotes:"发布说明",updateViaDocker:"通过 Docker Compose 更新：",updateViaHomeAssistant:"更新由 Home Assistant Supervisor 管理。请在 Home Assistant 中打开 设置 → 加载项 → Bambuddy 以安装新版本。",installUpdate:"安装更新",latestVersionRunning:"您正在运行最新版本",failedToCheckUpdates:"检查更新失败：{{error}}",backupRestore:"备份与恢复",backupRestoreDescription:"导出/导入设置并配置GitHub备份",goToBackup:"前往备份",externalUrl:"外部URL",externalUrlDescription:"Bambuddy可访问的外部URL。用于通知图像和外部集成。",bambuddyUrl:"Bambuddy URL",externalUrlHint:"包含协议和端口（例如：http://192.168.1.100:8000）",ftpRetry:"FTP重试",ftpRetryDescription:"当打印机WiFi不稳定时重试FTP操作。适用于3MF下载、打印上传、延时摄影下载和固件更新。",autoRetryDescription:"自动重试失败的FTP操作",retryAttempts:"重试次数",retryDelay:"重试延迟",connectionTimeout:"连接超时",time_one:"{{count}}次",time_other:"{{count}}次",second_one:"{{count}}秒",second_other:"{{count}}秒",nSeconds:"{{count}}秒",increaseForWeakWifi:"对WiFi信号弱的打印机增加此值",homeAssistant:"Home Assistant",homeAssistantFullDescription:"连接到Home Assistant，通过HA REST API控制智能插座。支持switch、light、input_boolean和script实体。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"长期访问令牌",haTokenHint:"在HA中创建令牌：个人资料 → 长期访问令牌 → 创建令牌",connectionSuccessful:"连接成功",connectionFailed:"连接失败",haConnectionSuccess:"已成功连接到Home Assistant。",haConnectionFailed:"连接Home Assistant失败。",mqttPublishing:"MQTT发布",mqttDescription:"将BamBuddy事件发布到外部MQTT代理，用于与Node-RED、Home Assistant和其他自动化系统集成。",mqttEnableDescription:"向外部MQTT代理发布事件",brokerHostname:"代理主机名",port:"端口",usernameOptional:"用户名（可选）",passwordOptional:"密码（可选）",topicPrefix:"主题前缀",topicPrefixHint:"主题格式：{{prefix}}/printers/<serial>/status 等",prometheusMetrics:"Prometheus 指标",prometheusEndpointDescription:"在 <code>/api/v1/metrics</code> 公开打印机指标，用于Prometheus/Grafana监控。",bearerTokenOptional:"Bearer令牌（可选）",bearerTokenHint:"设置后，请求必须包含 <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"连接状态",metricsPrinterState:"打印机状态（空闲/打印中等）",metricsPrintProgress:"打印进度 0-100%",metricsBedTemp:"热床温度",metricsNozzleTemp:"喷嘴温度",metricsPrintsTotal:"按结果分类的总打印数",metricsMore:"...以及更多（层数、风扇、队列、耗材用量）",smartPlugsDescription:"连接智能插座（Tasmota或Home Assistant）以自动化电源控制并跟踪打印机的能源使用情况。",allOn:"全部开启",allOff:"全部关闭",addSmartPlug:"添加智能插座",energySummary:"能源概要",currentPower:"当前功率",plugsOnline:"{{reachable}}/{{total}} 个插座在线",today:"今天",yesterday:"昨天",total:"总计",enablePlugsForSummary:"启用插座以查看能源概要",addNotificationProvider:"添加",systemBadge:"(系统)",creating:"创建中...",changing:"修改中...",deleteUserAndItems:"删除用户及其所有项目",deleteUserKeepItems:"删除用户，保留项目（将变为无主项目）",ok:"确定",twoFa:{totpTitle:"身份验证器应用 (TOTP)",totpDesc:"使用 Google Authenticator、Aegis 或 Authy 等应用。",emailOtpTitle:"邮件 OTP",emailOtpDesc:"登录时向 {{email}} 发送一次性验证码。",emailOtpNoEmail:"请先为账户添加邮箱地址以启用此方式。",addEmailFirst:"您的账户没有邮箱地址，请联系管理员添加。",setupTotp:"设置身份验证器应用",setupAuthApp:"设置身份验证器应用",setupInstructions:"使用身份验证器应用扫描二维码，然后输入验证码确认。",manualEntry:"无法扫描？请手动输入此密钥：",scannedContinue:"已扫描 — 继续",enterCodeToConfirm:"请输入身份验证器应用中的6位验证码以确认设置。",activate:"激活",disableTotp:"停用身份验证器",disableConfirmHint:"请输入有效的 TOTP 码或备用码来停用身份验证器。",totpDisabled:"身份验证器应用已停用。",emailOtpEnabled:"邮件 OTP 已启用。",emailOtpDisabled:"邮件 OTP 已停用。",smtpRequired:"请先配置并测试SMTP设置。",invalidCode:"无效验证码，请重试。",enableEmailOtp:"启用邮件 OTP",disableEmailOtp:"停用邮件 OTP",emailSetupEnterCode:"验证码已发送至您的邮箱地址。请在下方输入以确认您拥有此邮箱。",verifyAndEnable:"验证并启用",emailDisablePasswordHint:"请输入您的账户密码以确认停用邮件 OTP。",passwordPlaceholder:"输入您的密码",backupCodesTitle:"保存备用码",backupCodesWarning:"请将这些码保存在安全的地方。每个码只能使用一次，且不会再次显示。",backupCodesRemaining:"剩余 {{count}} 个备用码",savedCodes:"已保存",regenBackup:"重新生成备用码",regenBackupHint:"输入当前 TOTP 码以生成 10 个新备用码，所有现有备用码将失效。",newBackupCodes:"新备用码",linkedAccounts:"已关联的 SSO 账户",linkedAccountsDesc:"以下外部身份提供商已与您的账户关联。",oidcUnlinked:"账户已解除关联。"},oidc:{title:"SSO / OIDC 提供商",desc:"配置 OpenID Connect 提供商以实现单点登录。",addProvider:"添加提供商",newProvider:"新提供商",empty:"尚未配置 OIDC 提供商。",created:"提供商已创建。",updated:"提供商已更新。",deleted:"提供商已删除。",deleteTitle:"删除提供商",deleteMessage:'删除"{{name}}"？所有关联账户将断开连接。',form:{name:"显示名称",issuerUrl:"颁发者 URL",clientId:"客户端 ID",clientSecret:"客户端密钥",scopes:"作用域",iconUrl:"图标 URL（可选）",enabled:"已启用",autoCreate:"自动创建用户",autoCreateDesc:"首次登录时自动创建本地账户。",autoLink:"自动关联已有账户",autoLinkDesc:"首次登录时通过邮箱匹配现有本地账户并自动关联。",secretHint:"留空以保留当前",secretPlaceholder:"新密钥",emailClaim:"邮箱声明",emailClaimDesc:"用作邮箱身份的 JWT 声明。Azure Entra ID 请使用 'preferred_username' 或 'upn'（不发送 email_verified）。仅使用可信的声明名称。",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"要求邮箱已验证",requireEmailVerifiedDesc:"仅在提供商将邮箱声明标记为已验证时才接受。",requireEmailVerifiedWarning:"警告：将在未经验证的情况下接受邮箱。仅对受信任的提供商使用。",requireEmailVerifiedAutoLink:"请先禁用自动关联以更改此设置。"}}},notification:{printStarted:{title:"打印已开始",body:"{{printer}}：{{filename}} 已开始打印"},printCompleted:{title:"打印已完成",body:"{{printer}}：{{filename}} 已成功完成"},printFailed:{title:"打印失败",body:"{{printer}}：{{filename}} 打印失败"},printStopped:{title:"打印已停止",body:"{{printer}}：{{filename}} 已停止"},printProgress:{title:"打印进度",body:"{{printer}}：{{filename}} 已完成 {{percent}}%"},printerOffline:{title:"打印机离线",body:"{{printer}} 已离线"},printerError:{title:"打印机错误",body:"{{printer}}：{{error}}"},filamentLow:{title:"耗材不足",body:"{{printer}}：耗材即将用完"},maintenanceDue:{title:"维护到期",body:"{{printer}}：{{items}} 需要关注"}},errors:{generic:"出了点问题",networkError:"网络错误。请检查您的连接。",notFound:"未找到",unauthorized:"未授权",serverError:"服务器错误",validationError:"请检查您的输入",printerConnectionFailed:"连接打印机失败",saveFailed:"保存更改失败",deleteFailed:"删除失败",loadFailed:"加载数据失败"},hmsErrors:{title:"错误 - {{name}}",noErrors:"无错误",viewOnWiki:"在拓竹 Wiki 上查看",clearInstructions:"在打印机上清除错误以在此处消除它们。",clearErrors:"清除错误",clearSuccess:"HMS 错误已清除",clearFailed:"清除 HMS 错误失败"},mqttDebug:{title:"MQTT 调试日志",searchPlaceholder:"搜索主题或负载...",noMessages:"尚未记录消息",startLoggingHint:'点击"开始记录"以开始捕获 MQTT 消息',noMessagesMatch:"没有消息匹配您的筛选条件",adjustFilterHint:"尝试调整您的搜索或筛选条件",incoming:"传入",outgoing:"传出",loggingStopped:"记录已停止",loggingActive:"记录中 - 消息将自动刷新",startLogging:"开始记录",stopLogging:"停止记录",clearLog:"清除日志",topic:"主题",timestamp:"时间戳",direction:"方向",all:"全部"},printerFiles:{title:"文件管理器",storageUsed:"已用：",storageFree:"剩余：",filterPlaceholder:"筛选文件...",deleteButton:"删除",deleteFiles:"删除 {{count}} 个文件",deleteFileConfirm:'删除"{{name}}"？此操作无法撤销。',deleteFilesConfirm:"删除 {{count}} 个选中的文件？此操作无法撤销。",noFiles:"打印机上没有文件",loadingFiles:"加载文件中...",failedToLoad:"加载文件失败",toast:{filesDeleted:"已删除 {{count}} 个文件",deleteFailed:"删除失败：{{error}}"}},confirm:{delete:"确定要删除吗？",unsavedChanges:"您有未保存的更改。确定要离开吗？",clearQueue:"确定要清空队列吗？"},login:{title:"Bambuddy 登录",subtitle:"登录您的账户",username:"用户名",usernamePlaceholder:"输入您的用户名",usernameOrEmail:"用户名或邮箱",usernameOrEmailPlaceholder:"用户名或 @ 邮箱",password:"密码",passwordPlaceholder:"输入您的密码",signIn:"登录",signingIn:"登录中...",rememberMe:"记住我",forgotPassword:"忘记密码？",loginSuccess:"登录成功",loginFailed:"登录失败",enterCredentials:"请输入用户名和密码",enterEmail:"请输入您的电子邮件地址",oidcLoginFailed:"OIDC 登录失败",oidcErrors:{providerError:"身份提供商返回了一个错误",missingParameters:"OIDC 回调缺少必要参数",invalidState:"OIDC 状态无效或已被使用",stateExpired:"OIDC 登录会话已过期，请重试",providerNotFound:"未找到 OIDC 提供商",discoveryFailed:"无法获取 OIDC 发现文档",invalidDiscovery:"OIDC 发现文档无效",networkError:"OIDC 令牌交换时出现网络错误",badResponse:"OIDC 令牌交换时收到意外响应",noIdToken:"OIDC 提供商未返回 ID 令牌",validationFailed:"OIDC 令牌验证失败",nonceMismatch:"OIDC nonce 不匹配，可能存在重放攻击",missingSubClaim:"OIDC 令牌缺少 sub 声明",noLinkedAccount:"没有与此 OIDC 身份关联的本地帐户",accountInactive:"您的帐户已被停用",userResolutionFailed:"无法解析您的帐户",internalError:"OIDC 登录过程中发生内部错误",tokenExchangeFailed:"OIDC 令牌交换失败"},forgotPasswordTitle:"忘记密码",forgotPasswordMessage:"如果您忘记了密码，请联系系统管理员进行重置。",forgotPasswordEmailMessage:"输入您的邮箱地址，我们将向您发送新密码。",emailAddress:"邮箱地址",emailPlaceholder:"your.email@example.com",cancel:"取消",sending:"发送中...",sendResetEmail:"发送重置邮件",howToReset:"如何重置密码：",resetStep1:"联系您的 Bambuddy 管理员",resetStep2:"请他们在用户管理中重置您的密码",resetStep3:"他们可以为您设置一个临时密码",resetStep4:"使用新密码登录并在设置中修改密码",gotIt:"知道了",resetPassword:{title:"设置新密码",subtitle:"请在下方输入并确认您的新密码。",newPassword:"新密码",newPasswordPlaceholder:"至少 8 个字符",confirmPassword:"确认密码",confirmPasswordPlaceholder:"重复输入新密码",saving:"保存中…",submit:"设置新密码",backToLogin:"返回登录",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 8 个字符",resetFailed:"密码重置失败。链接可能已过期。"},twoFA:{title:"两步验证",subtitle:"您的账户已启用两步验证。请在下方输入验证码。",methodAuthenticator:"身份验证器应用",methodEmail:"邮箱验证码",methodBackup:"备用恢复码",instructionsTotp:"请打开您的身份验证器应用，输入 Bambuddy 的 6 位验证码。",instructionsEmail:"6 位验证码已发送至您的邮箱，有效期为 10 分钟。",instructionsEmailNotSent:"点击下方按钮，通过邮件获取验证码。",instructionsBackup:"请输入您的一个 8 位备用恢复码。每个恢复码只能使用一次。",sendCodeButton:"发送邮箱验证码",sendingCode:"发送中...",resendCode:"重新发送验证码",codeLabel:"验证码",backupCodeLabel:"备用恢复码",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"验证",verifyingButton:"验证中...",backToLogin:"← 返回登录页面",orContinueWith:"或通过以下方式登录",signInWith:"使用 {{provider}} 登录",enterCode:"请输入验证码",sendCodeFailed:"验证码发送失败",invalidCode:"无效验证码，请重试。"}},setup:{title:"Bambuddy 设置",subtitle:"为您的 Bambuddy 实例配置身份验证",enableAuth:"启用身份验证",adminAccount:"管理员账户",adminAccountDesc:"如果管理员用户已存在，将使用现有管理员账户启用身份验证。如需使用现有管理员，请将下方字段留空，或输入新凭据创建新管理员用户。",adminUsername:"管理员用户名",adminPassword:"管理员密码",optionalIfAdminExists:"（如管理员用户已存在则为可选）",adminUsernamePlaceholder:"输入管理员用户名（可选）",adminPasswordPlaceholder:"输入管理员密码（可选）",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认管理员密码",settingUp:"设置中...",completeSetup:"完成设置",toast:{authEnabledAdminCreated:"身份验证已启用并创建了管理员用户",authEnabledExistingAdmins:"使用现有管理员用户启用了身份验证",setupCompleted:"设置完成",enterBothCredentials:"请输入管理员用户名和密码，或将两者留空以使用现有管理员用户",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符"}},changePassword:{title:"修改密码",currentPassword:"当前密码",currentPasswordPlaceholder:"输入当前密码",newPassword:"新密码",newPasswordPlaceholder:"输入新密码（至少 6 个字符）",confirmPassword:"确认新密码",confirmPasswordPlaceholder:"确认新密码",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符",changing:"修改中...",success:"密码修改成功",failed:"密码修改失败"},plateAlert:{title:"打印已暂停！",message:"在构建板上检测到物体。打印已自动暂停。请清理打印板并继续打印。",understand:"我知道了"},camera:{title:"摄像头视图",invalidPrinterId:"无效的打印机 ID",live:"实时",snapshot:"快照",restartStream:"重启流",refreshSnapshot:"刷新快照",fullscreen:"全屏",exitFullscreen:"退出全屏",connectingToCamera:"连接摄像头中...",capturingSnapshot:"拍摄快照中...",connectionLost:"连接已断开",connectionFailed:"摄像头连接失败",reconnecting:"{{countdown}} 秒后重新连接...（第 {{attempt}}/{{max}} 次尝试）",reconnectNow:"立即重新连接",cameraUnavailable:"摄像头不可用",cameraUnavailableDesc:"请确保打印机已通电并已连接。",noCamera:"无可用摄像头",retry:"重试",cameraStream:"摄像头流",zoomOut:"缩小",zoomIn:"放大",resetZoom:"重置缩放",recording:"录制中",startRecording:"开始录制",stopRecording:"停止录制",chamberLight:"切换腔室灯"},groups:{title:"组管理",subtitle:"管理访问控制的权限组",backToSettings:"返回设置",createGroup:"创建组",noPermission:"您没有访问此页面的权限。",system:"系统",noDescription:"无描述",usersCount:"{{count}} 个用户",permissionsCount:"{{count}} 个权限",edit:"编辑",delete:"删除",toast:{created:"组创建成功",updated:"组更新成功",deleted:"组删除成功",enterGroupName:"请输入组名称"},modal:{editGroup:"编辑组",createGroup:"创建组",cancel:"取消",saving:"保存中...",creating:"创建中...",saveChanges:"保存更改"},form:{groupName:"组名称",groupNamePlaceholder:"输入组名称",systemGroupWarning:"系统组名称不可更改",description:"描述",descriptionPlaceholder:"输入描述（可选）",permissions:"权限（已选 {{count}} 个）"},deleteModal:{title:"删除组",message:"确定要删除此组吗？此组中的用户将失去这些权限。",confirm:"删除组"},editor:{title:"编辑组",createTitle:"创建组",search:"搜索权限...",selectAll:"全选",clearAll:"清除全部",permissionsSelected:"已选 {{count}} 个",noResults:"没有权限匹配您的搜索"}},users:{title:"用户管理",subtitle:"管理用户及其对 Bambuddy 实例的访问",backToSettings:"返回设置",createUser:"创建用户",noPermission:"您没有访问此页面的权限。",admin:"管理员",noGroups:"无组",active:"活跃",inactive:"非活跃",edit:"编辑",delete:"删除",system:"系统",noGroupsAvailable:"无可用组",table:{username:"用户名",groups:"组",status:"状态",actions:"操作"},toast:{created:"用户创建成功",updated:"用户更新成功",deleted:"用户删除成功",fillRequired:"请填写所有必填字段",passwordsDoNotMatch:"密码不匹配",passwordTooShort:"密码至少需要 6 个字符"},modal:{createUser:"创建用户",editUser:"编辑用户",cancel:"取消",creating:"创建中...",saving:"保存中...",saveChanges:"保存更改",advancedAuthSubtitle:"使用高级认证"},form:{username:"用户名",usernamePlaceholder:"输入用户名",email:"邮箱",emailPlaceholder:"user@example.com",password:"密码",passwordPlaceholder:"输入密码",confirmPassword:"确认密码",confirmPasswordPlaceholder:"确认密码",newPasswordPlaceholder:"输入新密码",confirmNewPasswordPlaceholder:"确认新密码",leaveBlankToKeep:"留空以保持当前值",groups:"组",optional:"可选",autoGeneratedPassword:"将自动生成安全密码并通过邮件发送给用户。",passwordManagedByAdvancedAuth:'密码由高级认证管理。使用"重置密码"通过邮件向用户发送新密码。',resetPassword:"重置密码",resettingPassword:"重置密码中..."},deleteModal:{title:"删除用户",message:"确定要删除此用户吗？此操作无法撤销。",confirm:"删除用户"}},streamOverlay:{title:"流叠加层",invalidPrinterId:"无效的打印机 ID",cameraStream:"摄像头流",progress:"进度",eta:"预计完成时间",printerIdle:"打印机空闲",printerOffline:"打印机离线",status:{printing:"打印中",paused:"已暂停",finished:"已完成",failed:"失败",idle:"空闲",unknown:"未知"}},profiles:{title:"配置文件",subtitle:"管理您的切片预设和压力推进校准",tabs:{cloud:"云端配置文件",local:"本地配置文件",kprofiles:"K 值配置"},localProfiles:{title:"本地配置文件",subtitle:"从 OrcaSlicer 导入和管理切片预设",import:"导入配置文件",importDesc:"将 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 文件拖放到此处",importing:"导入中...",search:"搜索本地预设...",noPresets:"暂无本地预设",badge:"本地",edit:"编辑",delete:"删除",cancel:"取消",deleteConfirmTitle:"删除预设",deleteConfirm:"确定要删除此预设吗？此操作无法撤销。",source:"来源",inheritsFrom:"继承自",filamentType:"类型",vendor:"厂商",compatiblePrinters:"兼容打印机",nozzleTemp:"喷嘴温度",cost:"成本",density:"密度",pressureAdvance:"压力推进",filament:"耗材",process:"工艺",printer:"打印机",toast:{importSuccess:"已导入 {{count}} 个预设",importSkipped:"跳过 {{count}} 个预设（重复）",importError:"导入时出现 {{count}} 个错误",deleted:"预设已删除",updated:"预设已更新"}},connectedAs:"已连接为",logout:"退出登录",noLogoutPermission:"您没有退出登录的权限",failedToLoad:"加载配置文件失败",retry:"重试",time:{justNow:"刚刚",minsAgo:"{{count}} 分钟前",hoursAgo:"{{count}} 小时前",daysAgo:"{{count}} 天前"},toast:{loggedOut:"已退出登录"},login:{title:"连接到拓竹云",subtitle:"跨设备同步您的切片预设",email:"邮箱",password:"密码",region:"地区",regionGlobal:"全球",regionChina:"中国",verificationCode:"验证码",totpCode:"验证器代码",checkEmail:"检查您的邮箱 ({{email}}) 获取 6 位验证码",enterTotpHint:"输入验证器应用中的 6 位代码",accessToken:"访问令牌",accessTokenHint:"粘贴您的拓竹访问令牌（来自 Bambu Studio）",back:"返回",loginButton:"登录",verifyButton:"验证",setTokenButton:"设置令牌",useToken:"改用访问令牌",useEmail:"改用邮箱登录",toast:{loggedIn:"登录成功",codeSent:"验证码已发送到您的邮箱",enterTotp:"输入验证器应用中的代码",tokenSet:"令牌设置成功"}},presets:{myPreset:"我的预设（可编辑）",duplicate:"复制",editable:"可编辑",failedToLoadDetails:"加载预设详情失败",deleteConfirm:"删除此预设？",deleteWarning:'这将从拓竹云中永久删除"{{name}}"。此操作无法撤销。',noDuplicatePermission:"您没有复制预设的权限",noEditPermission:"您没有编辑预设的权限",noDeletePermission:"您没有删除预设的权限",types:{filament:"耗材预设",printer:"打印机预设",process:"工艺预设"},toast:{deleted:"预设已删除",created:"预设已创建",updated:"预设已更新",duplicated:"预设已复制",fieldAdded:'字段"{{key}}"已添加',exported:"预设已导出"},baseLabel:"基础：{{name}}",currentLabel:"当前：{{name}}",newPreset:"新建预设",editPreset:"编辑预设",duplicatePreset:"复制预设",createNewPreset:"创建新预设",customizeSettings:"自定义新预设的设置",compareWithBase:"与基础预设比较",compare:"比较",basePreset:"基础预设",selectBasePreset:"选择基础预设...",presetName:"预设名称",myCustomPreset:"我的自定义预设",inheritsFrom:"继承自",dropJsonToImport:"拖放 JSON 以导入",tabs:{common:"常用",allFields:"所有字段"},availableFields:"可用字段",searchFieldsPlaceholder:"搜索字段...",noMatchingFields:"没有匹配的字段",allFieldsAdded:"所有字段已添加",addCustomField:"添加自定义字段",yourOverrides:"您的覆盖值",noOverridesYet:"暂无覆盖值",clickFieldsToAdd:"点击左侧的字段进行添加",saveAsTemplate:"保存为模板",jsonTip:"提示：将 .json 文件拖放到此对话框的任意位置以导入设置"},cloudView:{searchPlaceholder:"搜索预设...",templates:"模板",refresh:"刷新",newPreset:"新建预设",clearFilters:"清除筛选",compareMode:"比较模式",selectAnotherPreset:"选择另一个 {{type}} 预设",clickTwoPresets:"点击两个相同类型的预设进行比较",selectFirst:"1. 选择第一个",selectSecond:"2. 选择第二个",compareNow:"立即比较",lastSynced:"上次同步：",showingCount:"显示 {{showing}} / {{total}} 个预设",noPresetsFound:"未找到预设",columns:{filament:"耗材",process:"工艺",printer:"打印机"},noFilamentPresets:"无耗材预设",noProcessPresets:"无工艺预设",noPrinterPresets:"无打印机预设",filters:{type:"类型",owner:"所有者",printer:"打印机",nozzle:"喷嘴",filament:"耗材",layer:"层",all:"全部",myPresets:"我的预设",builtIn:"内置",process:"工艺"},noTemplatesPermission:"您没有管理模板的权限",noRefreshPermission:"您没有刷新配置文件的权限",noCreatePermission:"您没有创建预设的权限"},templates:{title:"快速模板",noTemplates:"暂无模板",createFirst:"从预设编辑器创建模板",typeFilter:"类型：",deleteTitle:"删除模板",deleteWarning:"此操作无法撤销",deleteConfirm:'确定要删除"{{name}}"吗？',namePlaceholder:"模板名称",descriptionPlaceholder:"描述",settingsJson:"设置 (JSON)",fieldsCount:"{{count}} 个字段",shownInModals:"在对话框中显示",hiddenInModals:"在对话框中隐藏",apply:"应用",toast:{deleted:"模板已删除",updated:"模板已更新",created:"模板已创建",applied:"模板已应用"}}},support:{debugLoggingActive:"调试日志记录已激活",manageLogs:"管理",collectItem7:"打印机连接和固件版本",collectItem8:"集成状态（Spoolman、MQTT、HA）",collectItem9:"网络接口（仅子网）",collectItem10:"Python 包版本",collectItem11:"数据库健康检查",collectItem12:"Docker 环境详情"},fileManager:{title:"文件管理器",subtitle:"组织和管理您的打印文件",uploadFiles:"上传文件",newFolder:"新建文件夹",folderName:"文件夹名称",folderNamePlaceholder:"例如：功能零件",renameFile:"重命名文件",renameFolder:"重命名文件夹",moveFiles:"移动 {{count}} 个文件",rootNoFolder:"根目录（无文件夹）",current:"当前",linkFolder:"链接文件夹",linkFolderDescription:'将"{{name}}"链接到项目或归档以便快速访问。',project:"项目",archive:"归档",noProjectsFound:"未找到项目",noArchivesFound:"未找到归档",unlink:"取消链接",link:"链接",dragDropFiles:"将文件拖放到此处",dropFilesHere:"将文件放在此处",orClickToBrowse:"或点击浏览",allFileTypesSupported:"支持所有文件类型。ZIP 文件将被解压。",zipFilesDetected:"检测到 ZIP 文件",zipExtractOptions:"ZIP 文件将被解压。选择如何处理文件夹结构：",preserveZipStructure:"保留 ZIP 中的文件夹结构",createFolderFromZip:"从 ZIP 文件名创建文件夹",stlThumbnailGeneration:"STL 缩略图生成",zipMayContainStl:"ZIP 文件可能包含 STL 文件。可以在解压时生成缩略图。",thumbnailsCanBeGenerated:"可以为 STL 文件生成缩略图。大型模型可能需要更长时间处理。",generateThumbnailsForStl:"为 STL 文件生成缩略图",threemfDetected:"检测到 3MF 文件",threemfExtractionInfo:"将自动从 3MF 文件中提取打印机型号、材料、颜色和打印设置。",willBeExtracted:"将被解压",filesExtracted:"已解压 {{count}} 个文件",uploadComplete:"上传完成：{{succeeded}} 个成功",uploadFailed:"上传失败",zipFilesFailed:"{{count}} 个文件失败",uploading:"上传中...",changeLink:"更改链接...",linkTo:"链接到...",linkToProjectOrArchive:"链接到项目或归档",addToQueue:"添加到队列",schedulePrint:"排程",generateThumbnail:"生成缩略图",generateThumbnails:"生成缩略图",generateThumbnailsForMissing:"为缺少缩略图的 STL 文件生成缩略图",gridView:"网格视图",listView:"列表视图",lowDiskSpaceWarning:"磁盘空间不足警告",lowDiskSpaceDetails:"仅剩 {{free}}（总共 {{total}}）。阈值设置为 {{threshold}} GB。",files:"文件",folders:"文件夹",size:"大小",free:"剩余",allFiles:"所有文件",wrap:"换行",enableTextWrapping:"启用文本换行",disableTextWrapping:"禁用文本换行",collapse:"折叠",collapseFoldersByDefault:"默认折叠文件夹",expandFoldersByDefault:"默认展开文件夹",dragToResizeTooltip:"拖动调整大小，双击重置",searchFiles:"搜索文件...",allTypes:"所有类型",prints:"打印",ascending:"升序",descending:"降序",resultsCount:"{{showing}} / {{total}} 个文件",selectAll:"全选",deselectAll:"取消全选",selected:"已选择 {{count}} 个",adding:"添加中...",loadingFiles:"加载文件中...",folderIsEmpty:"文件夹为空",noFilesYet:"暂无文件",folderEmptyDescription:"上传文件或将文件移入此文件夹以开始使用。",noFilesDescription:"上传文件以开始组织您的打印相关文件。",noMatchingFiles:"没有匹配的文件",noMatchingFilesDescription:"没有文件匹配您当前的搜索或筛选条件。",clearFilters:"清除筛选",printedCount:"已打印 {{count}} 次",uploadedBy:"上传者",deleteFolder:"删除文件夹",deleteFile:"删除文件",deleteFilesCount:"删除 {{count}} 个文件",deleteFolderConfirm:"确定要删除此文件夹吗？其中的所有文件也将被删除。",deleteFileConfirm:"确定要删除此文件吗？",deleteFilesConfirm:"确定要删除 {{count}} 个选中的文件吗？此操作无法撤销。",deleting:"删除中...",noPermissionRenameFolder:"您没有重命名文件夹的权限",noPermissionLinkFolder:"您没有链接文件夹的权限",noPermissionDeleteFolder:"您没有删除文件夹的权限",noPermissionPrint:"您没有打印的权限",noPermissionSlice:"You do not have permission to slice files",noPermissionAddToQueue:"您没有添加到队列的权限",noPermissionDownload:"您没有下载文件的权限",noPermissionRenameFile:"您没有重命名此文件的权限",noPermissionGenerateThumbnail:"您没有生成缩略图的权限",noPermissionDeleteFile:"您没有删除此文件的权限",noPermissionCreateFolder:"您没有创建文件夹的权限",noPermissionUpload:"您没有上传文件的权限",noPermissionMoveFiles:"您没有移动文件的权限",noPermissionDeleteFiles:"您没有删除文件的权限",linkExternal:"链接外部",linkExternalFolder:"链接外部文件夹",linkExternalFolderDescription:"将主机目录（NAS、USB、网络共享）挂载到文件管理器中。文件不会被复制——直接从原始路径访问。",externalFolderNamePlaceholder:"例如：NAS打印文件",externalPath:"主机路径",externalPathHelp:"Docker主机上目录的绝对路径。必须以绑定挂载方式挂载到容器中。",readOnly:"只读",readOnlyHelp:"防止上传和删除",showHiddenFiles:"显示隐藏文件（点文件）",externalFolder:"外部文件夹",scanFolder:"扫描",toast:{folderCreated:"文件夹已创建",folderDeleted:"文件夹已删除",fileDeleted:"文件已删除",filesDeleted:"已删除 {{count}} 个文件",filesMoved:"文件已移动",folderLinked:"文件夹已链接",folderUnlinked:"文件夹已取消链接",externalFolderLinked:"外部文件夹已链接并扫描",folderScanned:"扫描完成：添加 {{added}} 个，移除 {{removed}} 个",addedToQueue:"已将 {{count}} 个文件添加到队列",addedToQueuePartial:"已添加 {{added}} 个文件，{{failed}} 个失败",failedToAddToQueue:"添加文件失败：{{error}}",fileRenamed:"文件已重命名",folderRenamed:"文件夹已重命名",thumbnailsGenerated:"已生成 {{count}} 个缩略图",thumbnailsGeneratedPartial:"已生成 {{succeeded}} 个缩略图，{{failed}} 个失败",noStlMissingThumbnails:"没有缺少缩略图的 STL 文件",failedToGenerateThumbnails:"生成缩略图失败：{{error}}",thumbnailGenerated:"缩略图已生成",failedToGenerateThumbnail:"生成缩略图失败：{{error}}"}},projects:{title:"项目",subtitle:"组织和跟踪您的 3D 打印项目",newProject:"新建项目",editProject:"编辑项目",deleteProject:"删除项目",projectName:"项目名称",description:"描述",noProjects:"暂无项目",noProjectsFiltered:"没有{{status}}项目",noProjectsFilteredHelp:"您没有任何{{status}}项目。当项目状态更改时，它们将出现在这里。",createFirst:"创建您的第一个项目以开始组织相关打印、跟踪进度和管理构建。",createFirstButton:"创建您的第一个项目",create:"创建",files:"文件",prints:"打印",plates:"板",parts:"零件",lastModified:"最后修改",deleteConfirm:"确定要删除此项目吗？归档和队列项目将被取消链接但不会被删除。",addFiles:"添加文件",removeFile:"移除文件",viewDetails:"查看详情",namePlaceholder:"例如：Voron 2.4 构建",descriptionPlaceholder:"可选描述...",urlLabel:"网址",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"网址必须以 http:// 或 https:// 开头",openExternalUrl:"打开项目网址",coverImageLabel:"封面图片",coverImageAlt:"项目封面图片",coverImageUpload:"上传",coverImageReplace:"替换",coverImageRemove:"移除",color:"颜色",targetPlates:"目标板数",targetPlatesPlaceholder:"例如：25",targetPlatesHelp:"打印任务数量",targetParts:"目标零件数",targetPartsPlaceholder:"例如：150",targetPartsHelp:"所需零件总数",tagsLabel:"标签（逗号分隔）",tagsPlaceholder:"例如：voron、功能件、礼物",dueDate:"截止日期",priority:"优先级",priorityLow:"低",priorityNormal:"普通",priorityHigh:"高",priorityUrgent:"紧急",statusActive:"进行中",statusCompleted:"已完成",statusArchived:"已归档",done:"完成",completed:"已完成",failed:"失败",inQueue:"队列中",noPrintsYet:"暂无打印",printJobs:"打印任务（板）",partsPrinted:"已打印零件",failedParts:"失败零件",import:"导入",export:"导出",importProject:"导入项目",exportAll:"导出所有项目",loading:"加载项目中...",noEditPermission:"您没有编辑项目的权限",noDeletePermission:"您没有删除项目的权限",noCreatePermission:"您没有创建项目的权限",noImportPermission:"您没有导入项目的权限",noExportPermission:"您没有导出项目的权限",toast:{created:"项目已创建",updated:"项目已更新",deleted:"项目已删除",imported:"项目已导入",multipleImported:"已导入 {{count}} 个项目",importFailed:"导入失败",exported:"项目已导出（仅元数据）"}},projectDetail:{notFound:"未找到项目",backToProjects:"返回项目",export:"导出",exportProject:"导出项目",noExportPermission:"您没有导出项目的权限",noEditPermission:"您没有编辑项目的权限",partOf:"属于：",priorityLabel:"优先级：",noPrints:"此项目暂无打印",status:{active:"进行中",completed:"已完成",archived:"已归档"},priority:{low:"低",normal:"普通",high:"高",urgent:"紧急"},dueDate:{overdue:"已逾期",today:"今天到期",daysLeft:"还有 {{count}} 天"},progress:{platesProgress:"板进度",partsProgress:"零件进度",printJobs:"打印任务",parts:"零件",percentComplete:"{{percent}}% 完成",remaining:"剩余 {{count}} 个"},stats:{printJobs:"打印任务",total:"总计",failed:"{{count}} 个失败",partsPrinted:"已打印 {{count}} 个零件",printTime:"打印时间",filamentUsed:"耗材用量"},cost:{title:"成本追踪",filamentCost:"耗材成本",energy:"能源",totalCost:"总成本",total:"总计",includesBom:"含物料清单",budget:"预算",remaining:"剩余"},subProjects:{title:"子项目 ({{count}})"},notes:{title:"备注",noEditPermission:"您没有编辑备注的权限",placeholder:"添加关于此项目的备注...",empty:"暂无备注。点击编辑添加备注。"},files:{title:"文件",linkFolders:"从文件管理器链接文件夹",forQuickAccess:"到此项目以便快速访问。",fileCount:"{{count}} 个文件",empty:"未链接文件夹。前往文件管理器将文件夹链接到此项目。",noFiles:"此文件夹中没有文件。",print:"立即打印",addToQueue:"加入队列"},bom:{title:"材料清单",acquired:"已获取 {{completed}}/{{total}}",showAll:"显示全部",hideDone:"隐藏已完成",addPart:"添加零件",noAddPermission:"您没有添加零件的权限",partNamePlaceholder:"零件名称（例如：M3x8 螺丝）",partName:"零件名称",qty:"数量",price:"价格 ({{currency}})",sourcingUrlPlaceholder:"采购链接（可选）",remarksPlaceholder:"备注（可选）",deletePart:"删除零件",deleteConfirm:'确定要删除"{{name}}"吗？',noUpdatePermission:"您没有更新零件的权限",noEditPermission:"您没有编辑零件的权限",noDeletePermission:"您没有删除零件的权限",totalCost:"总成本：",empty:"材料清单中没有零件。添加硬件、电子元件或其他组件以跟踪需要采购的物品。"},timeline:{title:"活动时间线",empty:"暂无活动。"},template:{saveAsTemplate:"保存为模板",noCreatePermission:"您没有创建模板的权限"},queue:{title:"队列",viewAll:"查看全部",printing:"{{count}} 个打印中",queued:"{{count}} 个排队中"},prints:{title:"打印 ({{count}})"},toast:{projectUpdated:"项目已更新",partAdded:"零件已添加",partRemoved:"零件已移除",exportFailed:"导出失败",projectExported:"项目已导出",templateCreated:"模板已创建"}},system:{title:"系统信息",version:"版本",uptime:"运行时间",cpuUsage:"CPU 使用率",memoryUsage:"内存使用率",diskUsage:"磁盘使用率",networkInfo:"网络信息",logs:"日志",debugMode:"调试模式",enableDebug:"启用调试日志",disableDebug:"禁用调试日志",downloadLogs:"下载日志",clearLogs:"清除日志",dockerInfo:"Docker 信息",containerName:"容器名称",imageName:"镜像名称",platform:"平台",architecture:"架构"},library:{title:"耗材库",addFilament:"添加耗材",editFilament:"编辑耗材",deleteFilament:"删除耗材",vendor:"厂商",material:"材料",color:"颜色",kFactor:"K 值",temperature:"温度",noFilaments:"耗材库中没有耗材",deleteConfirm:"确定要删除此耗材吗？",importFromPrinter:"从打印机导入",exportToFile:"导出到文件"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Spoolman 集成",enabled:"Spoolman 已启用",url:"Spoolman URL",connected:"已连接",disconnected:"未连接",testConnection:"测试连接",sync:"同步",syncing:"同步中...",lastSync:"上次同步",linkToSpoolman:"链接到 Spoolman",openInSpoolman:"在 Spoolman 中打开",unlinkSpool:"取消链接耗材",unlinkConfirmTitle:"解开线轴？",unlinkConfirmMessage:"这将断开卷轴与 Spoolman 的连接。Spoolman 中的卷轴数据将保持不变。",selectSpool:"选择耗材",noUnlinkedSpools:"无未链接的耗材",linkSuccess:"耗材已成功链接到 Spoolman",linkFailed:"链接耗材失败",unlinkSuccess:"已成功从 Spoolman 取消链接耗材",unlinkFailed:"取消链接耗材失败",spoolId:"耗材 ID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"剩余",disableWeightSync:"禁用 AMS 估计重量同步",disableWeightSyncDesc:"不从 AMS 估计值更新剩余容量。如果您更喜欢 Spoolman 的用量追踪而非 AMS 百分比估计，请使用此选项。新耗材仍将使用 AMS 估计值作为初始重量。",reportPartialUsage:"报告失败打印的部分用量",reportPartialUsageDesc:"当打印失败或被取消时，根据层进度报告估计的耗材使用量。"},inventory:{title:"耗材库存",spoolmanMixedContentTitle:"Spoolman 无法通过 HTTPS 加载 — 浏览器已阻止混合内容",spoolmanMixedContentBody:"Bambuddy 通过您的反向代理以 HTTPS 提供服务，但您的 Spoolman 地址仍为 HTTP。出于安全考虑，浏览器会阻止混合内容，因此嵌入式 Spoolman 界面无法加载。Spoolman 也必须通过 HTTPS 访问。",spoolmanMixedContentFixReverseProxy:"请将 Spoolman 置于与 Bambuddy 相同的反向代理（Traefik / Nginx / Caddy）之后并启用 HTTPS，然后在设置中将 Spoolman URL 更新为新的 HTTPS 地址。",spoolmanMixedContentFixOpenNewTab:"作为变通方案，可在新标签页中通过 HTTP 打开 Spoolman — 混合内容规则仅适用于嵌入式框架，独立标签页仍可正常使用。",spoolmanOpenInNewTab:"在新标签页中打开 Spoolman",addSpool:"添加耗材",editSpool:"编辑耗材",material:"材料",selectMaterial:"选择材料...",subtype:"子类型",brand:"品牌",searchBrand:"搜索品牌...",useCustomBrand:'使用"{{brand}}"',useCustomMaterial:"使用自定义材料：{{material}}",colorName:"颜色名称",colorNamePlaceholder:"翡翠白、烈焰红...",color:"颜色",hexColor:"十六进制颜色",pickColor:"选择自定义颜色",labelWeight:"标签重量",coreWeight:"空盘重量",searchSpoolWeight:"搜索耗材重量...",weightUsed:"已使用",currentWeight:"剩余重量",measuredWeight:"称量重量",spoolName:"线轴",costPerKg:"每公斤成本",measuredWeightError:"称量重量必须在 {{min}}g 到 {{max}}g 之间。",slicerFilament:"切片耗材",slicerFilamentName:"切片预设名称",slicerPreset:"切片预设",searchPresets:"搜索耗材预设...",selectedPreset:"已选择",noPresetsFound:"未找到预设",tempOverrides:"温度覆盖",note:"备注",notePlaceholder:"关于此耗材的任何备注...",category:"类别",categoryPlaceholder:"例如：生产、原型、客户A",categoryNone:"未分类",lowStockThresholdOverride:"低库存阈值（此料盘）",lowStockThresholdOverrideHelp:"留空以使用全局阈值（{{global}}%）。",clearRfid:"清除 RFID 标签",rfidCleared:"RFID 标签已清除",archive:"归档",restore:"恢复",noSpools:"暂无耗材。添加您的第一个耗材开始使用。",noAvailableSpools:"没有可用的耗材。请先向库存中添加耗材，或从其他槽位取消分配一个耗材。",kProfiles:"K 值配置",addKProfile:"添加 K 值配置",assignSpool:"分配耗材",unassignSpool:"取消分配",assignSuccess:"耗材已分配，AMS 槽位已配置",assignFailed:"分配耗材失败",assignMismatchTitle:"材料不匹配",assignMismatchMessage:'所选线轴材料 "{{spoolMaterial}}" 与 {{location}} 的料槽材料 "{{trayMaterial}}" 不匹配。仍要分配吗？',assignMismatchConfirm:"仍然分配",assignPartialMismatchMessage:'线轴材料 "{{spoolMaterial}}" 与 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否继续？',assignProfileMismatchMessage:'线轴配置 "{{spoolProfile}}" 与 {{location}} 的料槽配置 "{{trayProfile}}" 不一致。是否继续？',selectSpool:"选择要分配到此槽位的耗材",assigned:"已分配",assigning:"分配中...",searchSpools:"搜索耗材...",showAllSpools:"显示所有耗材",allMaterials:"所有材料",filterByBrand:"按品牌筛选...",showArchived:"显示已归档",quickAdd:"快速添加（库存）",quantity:"数量",stock:"库存",configured:"已配置",spoolsCreated:"已创建 {{count}} 个耗材",spoolCreated:"耗材已创建",spoolUpdated:"耗材已更新",spoolDeleted:"耗材已删除",spoolArchived:"耗材已归档",spoolRestored:"耗材已恢复",deleteConfirm:"确定要删除此耗材吗？此操作无法撤销。",archiveConfirm:"确定要归档此耗材吗？",advancedSettings:"高级设置",filamentInfoTab:"耗材信息",paProfileTab:"PA 配置",filamentInfo:"耗材",additional:"附加",loadingPresets:"加载云端预设中...",cloudConnected:"云端已连接",cloudNotConnected:"云端未连接（使用默认值）",recentColors:"最近",searchColors:"搜索颜色...",searchResults:"搜索结果",allColors:"所有颜色",commonColors:"常用颜色",showLess:"显示更少",showAll:"显示全部",noColorsFound:"没有颜色匹配您的搜索",noResults:"未找到匹配项",extraColorsLabel:"附加颜色",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"粘贴 2 到 8 个十六进制色值,以逗号分隔。将渲染为渐变。",extraColorsInvalid:"已忽略无效的十六进制值:{{tokens}}",colorEffectLabel:"效果",colorEffect:{none:"无",sparkle:"闪光",wood:"木纹",marble:"大理石",glow:"夜光",matte:"哑光",silk:"丝光",galaxy:"星空",rainbow:"彩虹",metal:"金属",translucent:"半透明",gradient:"渐变",dualColor:"双色",triColor:"三色",multicolor:"多色"},selectMaterialFirst:"请先在耗材信息选项卡中选择材料。",noPrintersConfigured:"未配置打印机。添加打印机以使用 PA 配置。",matchingFilter:"匹配",anyBrand:"任何品牌",anyVariant:"任何变体",autoSelect:"自动选择",matches:"匹配",match:"匹配",noMatches:"无匹配",connected:"已连接",offline:"离线",printerOffline:"打印机离线。连接后查看校准配置。",noKProfilesMatch:"没有 K 值配置匹配所选耗材。",leftNozzle:"左喷嘴",rightNozzle:"右喷嘴",profilesSelected:"个校准配置已选择",totalInventory:"总库存",totalConsumed:"总消耗",byMaterial:"按材料",inPrinter:"在打印机中",lowStock:"库存不足",sinceTracking:"自开始追踪",loadedInAms:"已装载到 AMS/外置",remaining:"剩余",weightCheck:"重量检查",lastWeighed:"上次称量",neverWeighed:"从未称量",search:"搜索耗材...",showing:"显示",to:"到",of:"共",show:"显示",spools:"个耗材",spool:"个耗材",page:"页",noSpoolsMatch:"未找到结果",noSpoolsMatchDesc:"尝试调整您的搜索或筛选条件。",active:"活跃",archived:"已归档",all:"全部",used:"已使用",new:"新的",clearFilters:"清除筛选",table:"表格",cards:"卡片",net:"净重",groupSimilar:"分组",groupedSpools:"{{count}} 个相同耗材",groupedRows:"行",columns:"列",configureColumns:"配置列",configureColumnsDesc:"拖动以重新排序列或使用箭头。使用眼睛图标切换可见性。",visible:"可见",reset:"重置",cancel:"取消",applyChanges:"应用更改",moveUp:"上移",moveDown:"下移",hideColumn:"隐藏列",showColumn:"显示列",linkToSpool:"链接到耗材",tagLinked:"标签已链接到耗材",tagLinkFailed:"链接标签失败",tagAlreadyLinked:"标签已链接到其他耗材",unknownTag:"检测到未知 RFID 标签",usageHistory:"使用历史",noUsageHistory:"暂无使用记录",printName:"打印名称",weightConsumed:"消耗重量",clearHistory:"清除",historyCleared:"使用历史已清除",fillSourceLabel:"(库存)",lowStockThresholdError:"阈值必须在 0.1 到 99.9 之间"},timelapse:{title:"延时摄影",create:"创建延时摄影",download:"下载",delete:"删除",preview:"预览",frameRate:"帧率",quality:"质量",processing:"处理中...",noTimelapses:"无可用延时摄影"},ams:{title:"AMS",slot:"槽位",empty:"空",emptySlot:"空槽位",unknown:"未知",humidity:"湿度",temperature:"温度",filamentType:"耗材类型",filamentColor:"颜色",remaining:"剩余",history:"AMS 历史",noHistory:"无可用历史",configureSlot:"配置槽位",externalSpool:"外置耗材",profile:"配置",kFactor:"K 值",fill:"填充",configure:"配置",used:"已使用",remainingUnit:"剩余"},printModal:{title:"开始打印",selectPrinter:"选择打印机",selectPlate:"选择板",filamentMapping:"耗材映射",totalCost:"总成本：",slotRemainingShort:" - 剩余 {{grams}}g",printSettings:"打印设置",bedLeveling:"热床调平",flowCalibration:"流量校准",vibrationCalibration:"振动校准",layerInspection:"首层检查",timelapse:"延时摄影",startPrint:"开始打印",addToQueue:"添加到队列",cancel:"取消",noPrintersAvailable:"无可用打印机",printerBusy:"打印机忙碌",printerOffline:"打印机离线",sameTypeDifferentColor:"相同类型，不同颜色",filamentTypeNotLoaded:"耗材类型未装载",openCalendar:"打开日历",leftNozzle:"左",rightNozzle:"右",leftNozzleTooltip:"左喷嘴",rightNozzleTooltip:"右喷嘴",filamentOverride:"耗材覆盖",filamentOverrideHint:"可选覆盖用于基于模型的耗材分配。调度器将使用您选择的耗材而不是原始 3MF 值进行匹配。",originalFilament:"原始",overrideWith:"覆盖为",resetToOriginal:"恢复为原始",insufficientFilamentTitle:"耗材不足",insufficientFilamentMessage:"部分已分配线轴的剩余耗材少于本次打印所需：",insufficientFilamentLine:"{{printer}} - {{slot}}：需要 {{required}}g，剩余 {{remaining}}g",printAnyway:"仍然打印",forceColorMatch:"强制颜色匹配",staggerPrinterStarts:"Stagger printer starts",staggerGroupSize:"Group size",staggerInterval:"Interval (min)",staggerPreview:"{{printers}} printers → {{groups}} groups of {{size}}, starting every {{interval}} min",staggerLastGroup:"last group: {{count}}",staggerTotal:"total: {{minutes}} min",staggerToPrinters:"分批发送到 {{count}} 台打印机",gcodeInjection:"注入自动打印G-code"},backup:{title:"备份与恢复",createBackup:"创建备份",restoreBackup:"恢复备份",restoreDescription:"从备份文件替换所有数据",downloadBackup:"下载备份",uploadBackup:"上传备份",lastBackup:"上次备份",autoBackup:"自动备份",backupNow:"立即备份",restoreWarning:"警告：恢复备份将覆盖所有当前数据。",includeArchives:"包含归档",includeSettings:"包含设置",includeProfiles:"包含配置文件",backupSuccess:"备份创建成功",restoreSuccess:"备份恢复成功",backupFailed:"备份失败",restoreFailed:"恢复失败",restoreNote:"恢复期间虚拟打印机将停止",githubBackup:"GitHub 备份",enabled:"已启用",cloudLoginRequired:"需要登录 Bambu Cloud。请在 配置文件 → 云配置文件 中登录以启用 GitHub 备份。",cloudLoginRequiredShort:"需要Cloud登录",githubDescription:"自动将您的配置文件同步到私有 GitHub 仓库以进行备份和版本历史记录。",repositoryUrl:"仓库 URL",personalAccessToken:"个人访问令牌",tokenSaved:"（已保存）",enterNewToken:"输入新令牌以更新",tokenHint:"具有内容读写权限的细粒度令牌",branch:"分支",manualOnly:"仅手动",hourly:"每小时",daily:"每天",weekly:"每周",includeInBackup:"包含在备份中",kProfiles:"K 配置文件",kProfilesDescription:"来自已连接打印机的压力推进校准",noPrintersConnected:"没有打印机连接",printersConnected:"{{connected}}/{{total}} 已连接",cloudProfiles:"云配置文件",cloudProfilesDescription:"来自 Bambu Cloud 的耗材、打印机和工艺预设",appSettings:"应用设置",appSettingsDescription:"Bambuddy 配置（完整数据库）",spoolInventory:"耗材库存",spoolInventoryDescription:"耗材卷轴、使用记录和成本追踪",printArchives:"打印档案",printArchivesDescription:"打印历史元数据（不含 gcode/3MF 文件）",lastBackupAt:"上次备份：",noBackupsYet:"尚无备份",next:"下次：",startingBackup:"正在启动备份...",test:"测试",enableBackup:"启用备份",testConnection:"测试连接",enterRepoUrl:"请输入仓库 URL",enterRepoAndToken:"请输入仓库 URL 和访问令牌",repoRequired:"仓库 URL 为必填项",tokenRequired:"访问令牌为必填项",githubBackupEnabled:"GitHub 备份已启用",tokenUpdated:"令牌已更新",settingsSaved:"设置已保存",failedToSave:"保存失败：{{message}}",backupCompleteFiles:"备份完成 - {{count}} 个文件已更新",backupSkippedNoChanges:"备份已跳过 - 无更改",backupFailed2:"备份失败：{{message}}",clearedLogs:"已清除 {{count}} 条日志",failedToClearLogs:"清除日志失败：{{message}}",history:"历史记录",clear:"清除",date:"日期",status:"状态",commit:"提交",localBackup:"本地备份",localBackupDescription:"创建 Bambuddy 数据的完整备份，包括数据库、档案、上传和所有文件。",downloadBackupLabel:"下载备份",completeBackupZip:"完整备份：数据库 + 所有文件（ZIP）",download:"下载",preparingBackup:"正在准备备份...",creatingArchive:"正在创建备份归档...对于大型归档可能需要一些时间。",downloadingFile:"正在下载备份文件...",backupDownloaded:"备份下载成功",failedToCreateBackup:"创建备份失败：{{message}}",restore:"恢复",restoreReplacesAll:"恢复将替换所有数据。",restoreReplacesAllDetail:"您当前的数据库和文件将被完全替换。恢复后需要重启。",restoreConfirmTitle:"恢复备份",restoreConfirmMessage:'您确定要从"{{filename}}"恢复吗？这将完全替换您当前的数据库和所有文件。恢复后需要重启应用程序。',restoreConfirmButton:"恢复备份",uploadingFile:"正在上传备份文件...",backupRestoredRestart:"备份已恢复。请重启 Bambuddy。",failedToRestore:"恢复备份失败。请检查文件格式。",reloadNow:"立即重新加载",creatingBackup:"正在创建备份",restoringBackup:"正在恢复备份",preparing:"准备中...",processing:"处理中...",doNotClosePage:"请不要关闭此页面或导航离开。对于大型备份，此操作可能需要几分钟。",restoring:"恢复中...",restoreComplete:"恢复完成",restoreFailed2:"恢复失败",importSettings:"从备份文件导入设置",pleaseWaitRestoring:"请等待数据恢复中",selectBackupFile:"点击选择备份文件（.json 或 .zip）",duplicateHandling:"重复项处理方式：",matchPrinters:"打印机",matchPrintersBy:"按序列号匹配",matchSmartPlugs:"智能插座",matchSmartPlugsBy:"按 IP 地址匹配",matchNotificationProviders:"通知提供者",matchNotificationProvidersBy:"按名称匹配",matchFilaments:"耗材",matchFilamentsBy:"按名称 + 类型 + 品牌匹配",matchArchives:"档案",matchArchivesBy:"按内容哈希匹配（始终跳过）",matchPendingUploads:"待上传",matchPendingUploadsBy:"按文件名匹配",matchSettingsTemplates:"设置和模板",matchSettingsTemplatesBy:"始终覆盖",replaceExisting:"替换现有数据",keepExisting:"保留现有数据",overwriteDescription:"用备份数据覆盖已存在的项目",keepDescription:"仅恢复尚不存在的项目",overwriteCaution:"注意：",overwriteWarning:"覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问代码永远不会被覆盖。",cancel:"取消",processingBackup:"正在处理备份文件...",itemsRestored:"已恢复项目",itemsSkipped:"已跳过项目",restored:"已恢复",skippedAlreadyExist:"已跳过（已存在）",filesCategory:"文件（3MF、缩略图等）",andMore:"...还有 {{count}} 项",newApiKeysGenerated:"已生成新的 API 密钥",keysShownOnce:"这些密钥仅显示一次。请立即复制！",copy:"复制",noDataFound:"在备份文件中未找到可恢复的数据。",close:"关闭",scheduledBackup:"Scheduled Backups",scheduledBackupDescription:"Automatically create backup snapshots on a schedule. Output directory can be mounted to a NAS or external storage.",frequency:"Frequency",backupTime:"Time",retention:"Retention",retentionDescription:"Number of backups to keep",outputPath:"Output Path",outputPathPlaceholder:"Default: {{path}}",outputPathDescription:"Leave empty for default location",runNow:"Run Now",backupFiles:"Backup Files",noScheduledBackups:"No backups yet",deleteBackup:"Delete",deleteBackupConfirm:"Delete this backup file?",backupRunning:"Backup in progress...",scheduledBackupComplete:"Backup completed successfully",scheduledBackupFailed:"Backup failed",nextBackup:"Next backup",backupSize:"Size",utc:"UTC",defaultPathLabel:"Default:",categories:{settings:"设置",notification_providers:"通知提供者",notification_templates:"通知模板",smart_plugs:"智能插座",printers:"打印机",filaments:"耗材",maintenance_types:"维护类型",archives:"档案",projects:"项目",pending_uploads:"待上传",external_links:"外部链接",api_keys:"API 密钥"}},tags:{title:"标签",addTag:"添加标签",editTag:"编辑标签",deleteTag:"删除标签",tagName:"标签名称",tagColor:"标签颜色",noTags:"无标签",deleteConfirm:"确定要删除此标签吗？",manageTags:"管理标签"},uploadModal:{title:"上传 3MF 文件",dragDrop:"将 .3mf 文件拖放到此处",or:"或",browseFiles:"浏览文件",extractionInfo:"将从 3MF 文件元数据中自动提取打印机型号。",uploaded:"已上传",failed:"失败",uploading:"上传中...",upload:"上传",uploadFailed:"上传失败"},editArchive:{title:"编辑归档",name:"名称",namePlaceholder:"打印名称",printer:"打印机",noPrinter:"无打印机",project:"项目",noProject:"无项目",itemsPrinted:"打印数量",itemsPrintedHelp:"此打印任务中生产的物品数量",notes:"备注",notesPlaceholder:"添加关于此打印的备注...",externalLink:"外部链接",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"链接到 Printables、Thingiverse 或其他来源",tags:"标签",tagsPlaceholder:"添加标签...",addMoreTags:"添加更多标签...",matchingTags:'匹配"{{query}}"',existingTags:"现有标签",clickToAdd:"（点击添加）",status:"状态",failureReason:"失败原因",selectReason:"选择原因...",photos:"打印成品照片",photosHelp:"点击 + 添加打印成品照片",printResult:"打印成品",saving:"保存中...",failureReasons:{adhesionFailure:"附着力失败",spaghettiDetached:"拉丝 / 脱落",layerShift:"层偏移",cloggedNozzle:"喷嘴堵塞",filamentRunout:"耗材用完",warping:"翘曲",stringing:"拉丝",underExtrusion:"挤出不足",powerFailure:"断电",userCancelled:"用户取消",other:"其他"},statuses:{completed:"已完成",failed:"失败",aborted:"已取消",printing:"打印中"}},kProfiles:{title:"K 值配置",noPrintersConfigured:"未配置打印机",addPrinterInSettings:"在设置中添加打印机以管理 K 值配置",noActivePrinters:"无活跃打印机",enablePrinterConnection:"启用打印机连接以查看其 K 值配置",loadingProfiles:"加载 K 值配置中...",printerOffline:"打印机离线",printerOfflineDesc:"所选打印机未连接。开启电源以查看 K 值配置。",noMatchingProfiles:"无匹配的配置",noMatchingProfilesDesc:"没有配置匹配您的搜索条件",noKProfiles:"无 K 值配置",noKProfilesDesc:"未找到 {{diameter}}mm 喷嘴的压力推进配置",createFirstProfile:"创建第一个配置",printer:"打印机",nozzle:"喷嘴",refresh:"刷新",addProfile:"添加配置",export:"导出",import:"导入",select:"选择",selectAll:"全选",delete:"删除",searchPlaceholder:"按名称或耗材搜索...",allExtruders:"所有挤出机",leftOnly:"仅左侧",rightOnly:"仅右侧",allFlow:"所有流量",hfOnly:"仅高流量",sOnly:"仅标准",sortName:"排序：名称",sortKValue:"排序：K 值",sortFilament:"排序：耗材",leftExtruder:"左挤出机",rightExtruder:"右挤出机",modal:{addTitle:"添加 K 值配置",editTitle:"编辑 K 值配置",profileName:"配置名称",profileNamePlaceholder:"我的 PLA 配置",kValue:"K 值",kValuePlaceholder:"0.020",kValueHelp:"典型范围：PLA 0.01 - 0.06，PETG 0.02 - 0.10",filament:"耗材",selectFilament:"选择耗材...",noFilamentsHelp:"未找到耗材。请先在 Bambu Studio 中创建 K 值配置。",flowType:"流量类型",highFlow:"高流量",standard:"标准",nozzleSize:"喷嘴尺寸",extruder:"挤出机",extruders:"挤出机",left:"左",right:"右",notes:"备注（本地存储）",notesPlaceholder:"添加关于此配置的备注...",notesHelp:"备注保存在 Bambuddy 中，不在打印机上",syncing:"与打印机同步中...",savingExtruder:"保存到挤出机 {{current}}/{{total}}...",pleaseWait:"请稍候"},deleteConfirm:{title:"删除配置",cannotUndo:"此操作无法撤销",message:'确定要从打印机删除"{{name}}"吗？'},bulkDelete:{title:"删除配置",cannotUndo:"此操作无法撤销",message:"确定要从打印机删除 {{count}} 个选中的配置吗？"},toast:{profileSaved:"K 值配置已保存",profilesSaved:"K 值配置已保存到 {{count}} 个挤出机",selectAtLeastOneExtruder:"请至少选择一个挤出机",profileDeleted:"K 值配置已删除",profilesDeleted:"已删除 {{count}} 个配置",exportedProfiles:"已导出 {{count}} 个配置",importedProfiles:"已导入 {{count}} / {{total}} 个配置",noProfilesToExport:"无可导出的配置",invalidFileFormat:"无效的文件格式",failedToParseImport:"解析导入文件失败",failedToSaveBatch:"批量保存 K 值配置失败",noteSaved:"备注已保存",failedToSaveNote:"保存备注失败"},permission:{noRead:"您没有刷新配置的权限",noCreate:"您没有添加配置的权限",noUpdate:"您没有更新 K 值配置的权限",noDelete:"您没有删除 K 值配置的权限",noExport:"您没有导出配置的权限",noImport:"您没有导入配置的权限"}},virtualPrinter:{title:"虚拟打印机",running:"运行中",stopped:"已停止",description:{default:"启用虚拟打印机，使其在 Bambu Studio 和 OrcaSlicer 中可见。发送到此打印机的文件将直接归档而不打印。",proxy:"启用代理，将切片软件流量中继到真实打印机，允许在任何网络上远程打印。"},enable:{title:"启用虚拟打印机",visibleInSlicer:'在切片软件发现中显示为"Bambuddy"',proxyingTo:"代理到 {{name}}",notActive:"未激活"},model:{title:"打印机型号",description:"选择要模拟的打印机型号。",restartWarning:"更改型号将重启虚拟打印机"},accessCode:{title:"访问码",isSet:"访问码已设置",notSet:"未设置访问码 - 需要设置才能启用",placeholder:"输入 8 位字符代码",placeholderChange:"输入新代码以更改",hint:"必须恰好 8 个字符。切片软件使用此代码进行认证。",charCount:"({{count}}/8)"},targetPrinter:{title:"目标打印机",configured:"代理目标已配置",notConfigured:"未选择目标打印机 - 代理模式需要设置",placeholder:"选择打印机...",hint:"选择要将切片软件流量代理到的打印机。打印机必须处于局域网模式。",noPrinters:"未配置打印机。请先添加打印机以使用代理模式。"},remoteInterface:{title:"网络接口覆盖",configured:"接口覆盖已激活",optional:"可选 - 当自动检测的 IP 不正确时使用（例如多网卡、Docker、VPN）",placeholder:"自动检测（默认）...",hint:"覆盖通过 SSDP 广播并在 TLS 证书中使用的 IP 地址。在 Bambuddy 有多个网络接口时很有用。"},mode:{title:"模式",archive:"归档",archiveDesc:"立即归档文件",review:"审核",reviewDesc:"归档前审核",queue:"队列",queueDesc:"归档并添加到队列",proxy:"代理",proxyDesc:"中继到真实打印机"},autoDispatch:{title:"自动派发",description:"添加到队列时自动开始打印。关闭后，打印任务等待手动派发。"},tailscaleDisabled:{title:"Tailscale 集成",description:"启用后，使用 Tailscale 获取受信任的 TLS 证书。禁用则仅使用自签名证书。"},setupRequired:{title:"需要设置",description:"虚拟打印机功能需要额外的系统配置才能工作。包括端口转发、防火墙规则和平台特定设置。",readGuide:"启用前请阅读设置指南"},archiveNameSource:{title:"存档名称来源",description:'选择通过虚拟打印机接收文件时新存档的命名方式。"元数据"使用 3MF 中嵌入的切片标题（默认）。"文件名"使用 Bambu Studio 通过 FTP 发送的文件名 — 当您在"发送到打印机"对话框中重命名作业时非常有用。',metadata:"元数据",filename:"文件名"},howItWorks:{title:"工作原理",step1:"在同一局域网中，虚拟打印机会通过发现机制自动出现在您的切片软件（Bambu Studio / OrcaSlicer）中。从其他网络，通过 IP 地址和访问码手动添加。",step2:'在归档、审核和队列模式下，使用切片软件中的"发送"按钮将 3MF 文件上传到 Bambuddy。切片软件会显示"打印成功"— 文件已存储，未打印。',step3:"在代理模式下，虚拟打印机将所有流量中继到真实打印机 — 打印会立即开始，就像直接连接一样。"},status:{title:"状态详情",printerName:"打印机名称",model:"型号",serialNumber:"序列号",mode:"模式",pendingFiles:"待处理文件",targetPrinter:"目标打印机",ftpPort:"FTP 端口",mqttPort:"MQTT 端口",ftpConnections:"FTP 连接",mqttConnections:"MQTT 连接"},toast:{updated:"虚拟打印机设置已更新",failedToUpdate:"更新设置失败",tailscaleNotAvailable:"此主机上未安装 Tailscale。请先安装 Tailscale，然后重试。",copyFailed:"复制失败 — 请手动选中文本",accessCodeRequired:"请先设置访问码",targetPrinterRequired:"请先选择目标打印机",bindIpRequired:"请先设置绑定 IP",accessCodeEmpty:"访问码不能为空",accessCodeLength:"访问码必须恰好 8 个字符",created:"虚拟打印机已创建",failedToCreate:"创建虚拟打印机失败",deleted:"虚拟打印机已删除",failedToDelete:"删除虚拟打印机失败"},list:{title:"虚拟打印机",add:"添加",addFirst:"添加虚拟打印机",empty:"未配置虚拟打印机。添加一个以开始使用。"},bindIp:{title:"绑定接口",placeholder:"选择接口...",hint:"此虚拟打印机绑定的网络接口。每台打印机必须唯一。"},proxy:{accessCodeHint:"在代理模式下，在切片软件中使用目标打印机的访问码。连接会透明转发到真实打印机。"},addDialog:{title:"添加虚拟打印机",name:"名称",hint:"创建后可以配置访问码、目标打印机和其他设置。",create:"创建"},deleteConfirm:{title:"删除虚拟打印机",message:'确定要删除"{{name}}"吗？这将停止此打印机的所有服务。'}},modelViewer:{openInSlicer:"在切片软件中打开",tabs:{model:"3D 模型",gcode:"G-code 预览"},notAvailable:"不可用",notSliced:"未切片",plates:"板",allPlates:"所有板",plateNumber:"板 {{number}}",plateCount:"{{count}} 个板",plateCount_other:"{{count}} 个板",objectCount:"{{count}} 个对象",objectCount_other:"{{count}} 个对象",filamentCount:"{{count}} 种耗材",filamentCount_other:"{{count}} 种耗材",eta:"预计 {{minutes}} 分钟",noPreview:"此文件无可用预览",pagination:{pageOf:"第 {{current}} / {{total}} 页",prev:"上一页",next:"下一页"},errors:{failedToLoad:"加载文件失败",noMeshes:"3MF 文件中未找到网格",unsupportedFormat:"不支持的文件格式"}},maintenanceDescriptions:{lubricateCarbonRods:"在碳纤维杆上涂抹润滑剂以确保顺畅运动",lubricateRails:"在线性导轨上涂抹润滑剂以确保顺畅运动",cleanNozzle:"清洁热端和喷嘴以防止堵塞",checkBelts:"检查皮带张力以确保打印精度",cleanBuildPlate:"清洁构建板以获得更好的附着力",checkExtruder:"检查挤出机齿轮磨损情况",checkCooling:"确保冷却风扇正常工作",generalInspection:"打印机综合检查",cleanCarbonRods:"清洁碳纤维杆以减少摩擦",lubricateSteelRods:"在钢杆上涂抹润滑剂以确保顺畅运动",cleanSteelRods:"清洁钢杆以减少摩擦",cleanLinearRails:"擦拭线性导轨以清除灰尘和碎屑",checkPtfeTube:"检查 PTFE 管的磨损或损坏",replaceHepaFilter:"更换 HEPA 过滤器以保证空气质量",replaceCarbonFilter:"更换活性炭过滤器",lubricateLeftNozzleRail:"润滑左喷嘴导轨（H2 系列）"},smartPlugs:{offline:"离线",admin:"管理",openPlugAdminPage:"打开插座管理页面",deleteSmartPlug:"删除智能插座",turnOnSmartPlug:"开启智能插座",turnOffSmartPlug:"关闭智能插座",turnOn:"开启",turnOff:"关闭",addSmartPlug:{scanningNetwork:"扫描网络中...",chooseEntity:"选择实体...",connectionFailed:"连接失败",searchEntities:"搜索实体...",searchPowerSensors:"搜索功率传感器...",searchEnergySensors:"搜索能量传感器...",placeholders:{plugName:"客厅插座",mqttStateOnValue:"ON、true、1",mqttSameAsPower:"与功率主题相同，或不同"}},linkedTo:"关联到：",monitorOnly:"仅监控",alerts:"警报",scheduleOn:"开启 {{time}}",scheduleOff:"关闭 {{time}}",on:"开启",off:"关闭",power:"功率",kwhToday:"今日kWh",settings:"设置",automationSettings:"自动化设置",showInSwitchbar:"在开关栏显示",quickAccessSidebar:"从侧边栏快速访问",enabled:"已启用",enableAutomation:"为此插座启用自动化",autoOn:"自动开启",autoOnDescription:"打印开始时开启",autoOff:"自动关闭",autoOffDescription:"打印完成时关闭（一次性）",autoOffPersistent:"保持启用",autoOffPersistentDescription:"在打印之间保持启用而非一次性",turnOffDelayMode:"关闭延迟模式",time:"时间",temp:"温度",delayMinutes:"延迟（分钟）",tempThreshold:"温度阈值（°C）",tempThresholdDescription:"当喷嘴冷却到此温度以下时关闭",edit:"编辑",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',turnOnConfirm:'确定要开启"{{name}}"吗？',turnOffConfirm:'确定要关闭"{{name}}"吗？这将切断连接设备的电源。',failedToTurn:'无法{{action}}"{{name}}"',unknown:"未知",addTitle:"添加智能插座",editTitle:"编辑智能插座",stopScanning:"停止扫描",discoverTasmota:"发现Tasmota设备",foundDevices:"找到{{count}}个设备 - 点击选择：",noDevicesFound:"未在您的网络中找到Tasmota设备",haNotConfigured:"Home Assistant未配置。请在以下位置设置",haSettingsPath:"设置 → 网络 → Home Assistant",selectEntity:"选择实体 *",ipAddress:"IP地址 *",nameLabel:"名称 *",username:"用户名",password:"密码",authHint:"如果您的Tasmota设备不需要认证，请留空",linkToPrinter:"关联打印机",noPrinter:"无打印机（仅手动控制）",linkingDescription:"关联后可在打印开始/完成时自动开关",powerAlerts:"功率警报",alertAbove:"高于时警报（W）",alertBelow:"低于时警报（W）",alertDescription:"当电力消耗超过这些阈值时收到通知。留空以禁用该方向。",dailySchedule:"每日计划",turnOnAt:"开启时间",turnOffAt:"关闭时间",scheduleDescription:"每天在这些时间自动开关插座。留空以跳过该操作。",showOnPrinterCard:"在打印机卡片上显示",displayOnPrinterCard:"在打印机卡片上显示按钮",connectedResult:"已连接！",deviceLabel:"设备：{{name}} - ",stateLabel:"状态：{{state}}",test:"测试",delete:"删除",save:"保存",add:"添加",cancel:"取消",failedToStartScan:"无法开始扫描",nameRequired:"名称为必填项",entityRequired:"Home Assistant插座需要实体",mqttTopicRequired:"必须为功率、能源或状态监控配置至少一个MQTT主题",loadingEntities:"正在加载实体...",loading:"加载中...",failedToLoadEntities:"加载实体失败：{{error}}",noEntitiesMatching:'未找到匹配"{{search}}"的实体',noEntitiesAvailable:"无可用实体",searchingEntities:"搜索所有实体（找到{{count}}个）",showingEntities:"显示 switch、light、input_boolean（{{count}}个可用）",energyMonitoringOptional:"能源监控（可选）",energyMonitoringHint:"搜索并选择提供功率/能源数据的传感器。",powerSensorW:"功率传感器（W）",energyTodayKwh:"今日能源（kWh）",totalEnergyKwh:"总能源（kWh）",noMatchingSensors:"无匹配的传感器",none:"无",mqttNotConfigured:"MQTT代理未配置。请在以下位置设置代理地址",mqttSettingsPath:"设置 → 网络 → MQTT发布",mqttNotConfiguredSuffix:"（您不需要启用发布，只需填写代理详细信息）。",mqttMonitorOnlyDescription:"MQTT插座通过MQTT订阅接收功率/能源数据。开关控制不可用 - 请使用您的MQTT代理或家庭自动化系统。",powerMonitoring:"功率监控",energyMonitoring:"能源监控",stateMonitoring:"状态监控",optional:"可选",topic:"主题",jsonPath:"JSON路径",multiplier:"乘数",onValue:"ON值",mqttPowerHint:`JSON路径从JSON负载中提取值（例如"power_l1"）。如果主题发布原始数值，请留空。
 乘数：mW→W使用0.001，kW→W使用1000。`,mqttEnergyHint:`JSON路径从JSON负载中提取值。原始值请留空。
 乘数：Wh→kWh使用0.001，MWh→kWh使用1000。`,mqttStateHint:`JSON路径从JSON负载中提取值。原始值请留空。
-ON值：表示"ON"的确切字符串。留空以自动检测（ON、true、1）。`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"功率URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"功率乘数",restEnergyUrl:"能耗URL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"能耗乘数",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"功率数据的独立URL（留空则使用状态URL）",restEnergyUrlHint:"能耗数据的独立URL（留空则使用状态URL）",restEnergyHint:"每个值可以使用独立的URL，或回退到状态URL。使用乘数进行单位转换（例如：0.001 将 Wh 转换为 kWh）。",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"开关栏中没有开关",enableSwitchbarHint:'在设置 > 智能插座中启用"在开关栏显示"'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"电子邮件",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP 电子邮件通知",telegram:"通过 Telegram 机器人发送通知",discord:"通过 Webhook 发送到 Discord 频道",ntfy:"免费、可自托管的推送通知",pushover:"简单、可靠的推送通知",callmebot:"通过 CallMeBot 免费发送 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL",homeassistant:"Home Assistant 仪表板中的持久通知"},lastSuccess:"上次：{{date}}",error:"错误",printer:"打印机：",allPrinters:"所有打印机",sendTestNotification:"发送测试通知",eventSettings:"事件设置",enabled:"已启用",sendFromProvider:"从此提供商发送通知",printEvents:"打印事件",printerStatus:"打印机状态",amsAlarms:"AMS 警报",amsHtAlarms:"AMS-HT 警报",printQueue:"打印队列",start:"开始",plateCheck:"热床检测",complete:"完成",failed:"失败",stopped:"已停止",progress:"进度",offline:"离线",lowFilament:"耗材不足",maintenance:"维护",amsHumidity:"AMS 湿度",amsTemp:"AMS 温度",amsHtHumidity:"AMS-HT 湿度",amsHtTemp:"AMS-HT 温度",bedCooled:"热床已冷却",firstLayer:"首层完成",quiet:"免打扰",digest:"摘要 {{time}}",printStarted:"打印已开始",plateNotEmpty:"热床非空",plateNotEmptyDescription:"打印前检测到物体",printCompleted:"打印已完成",bedCooledLabel:"热床已冷却",bedCooledDescription:"打印后热床温度降至阈值以下",firstLayerCompleteLabel:"首层打印完成",firstLayerCompleteDescription:"首层完成时发送带照片的通知",missingSpoolAssignmentLabel:"缺少料卷分配",missingSpoolAssignmentDescription:"当打印开始且所需料盘没有分配料卷时发送通知",printFailed:"打印失败",printStopped:"打印已停止",progressMilestones:"进度里程碑",progressMilestonesDescription:"在 25%、50%、75% 时通知",printerOffline:"打印机离线",printerError:"打印机错误",lowFilamentLabel:"耗材不足",maintenanceDue:"需要维护",maintenanceDueDescription:"需要维护时通知",amsHumidityHigh:"AMS 湿度过高",amsHumidityHighDescription:"普通 AMS 湿度超过阈值",amsTemperatureHigh:"AMS 温度过高",amsTemperatureHighDescription:"普通 AMS 温度超过阈值",amsHtHumidityHigh:"AMS-HT 湿度过高",amsHtHumidityHighDescription:"AMS-HT 湿度超过阈值",amsHtTemperatureHigh:"AMS-HT 温度过高",amsHtTemperatureHighDescription:"AMS-HT 温度超过阈值",jobAdded:"任务已添加",jobAddedDescription:"任务已添加到队列",jobAssigned:"任务已分配",jobAssignedDescription:"基于模型的任务已分配给打印机",jobStarted:"任务已开始",jobStartedDescription:"队列任务已开始打印",jobWaiting:"任务等待中",jobWaitingDescription:"任务正在等待耗材或打印机",jobSkipped:"任务已跳过",jobSkippedDescription:"任务已跳过（上一个失败）",jobFailed:"任务失败",jobFailedDescription:"任务启动失败",queueComplete:"队列已完成",queueCompleteDescription:"所有队列任务已完成",quietHours:"免打扰时段",noNotificationsDuring:"在此时段内不发送通知",editProviderToChangeQuietHours:"编辑提供商以更改免打扰时段",dailyDigest:"每日摘要",batchNotifications:"将通知汇总为每日摘要",sendAt:"发送于 {{time}}",editProviderToChangeDigestTime:"编辑提供商以更改摘要时间",edit:"编辑",deleteProvider:"删除通知提供商",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',delete:"删除",addTitle:"添加通知提供商",editTitle:"编辑通知提供商",nameLabel:"名称 *",namePlaceholder:"我的通知",providerTypeLabel:"提供商类型 *",configuration:"配置",testConfiguration:"测试配置",printerFilter:"打印机筛选",onlyFromPrinter:"仅发送来自此打印机的事件通知",quietHoursDnd:"免打扰时段",quietStart:"开始",quietEnd:"结束",dailyDigestLabel:"每日摘要",sendDigestAt:"发送摘要于",digestCollected:"事件将被收集并在此时间作为单条摘要发送",notificationEvents:"通知事件",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（打印完成后）",eventPriority:{sectionTitle:"ntfy 优先级",helpNtfy:"为每个已启用的事件选择优先级。ntfy 使用它来升级提醒（声音、可见性、推送行为）。此处未设置的级别将使用 ntfy 服务器默认值。",min:"最低",low:"低",default:"默认",high:"高",urgent:"紧急"},cancel:"取消",save:"保存",add:"添加",nameRequired:"名称为必填项",fieldRequired:"{{field}}为必填项",phoneNumber:"电话号码",apiKey:"API 密钥",serverUrl:"服务器 URL",topic:"主题",authToken:"认证令牌",userKey:"用户密钥",appToken:"应用令牌",priority:"优先级",botToken:"机器人令牌",chatId:"聊天 ID",smtpServer:"SMTP 服务器",smtpPort:"SMTP 端口",security:"安全",authentication:"认证",username:"用户名",password:"密码",fromEmail:"发件人邮箱",toEmail:"收件人邮箱",webhookUrl:"Webhook URL",payloadFormat:"负载格式",authorization:"授权",titleFieldName:"标题字段名",messageFieldName:"消息字段名",editTemplate:"编辑模板：{{name}}",titleLabel:"标题",bodyLabel:"正文",titlePlaceholder:"通知标题...",bodyPlaceholder:"通知正文...",availableVariables:"可用变量",clickToInsert:"点击插入到正文光标位置",livePreview:"实时预览",hide:"隐藏",show:"显示",loadingPreview:"加载预览中...",enterTemplateContent:"输入模板内容以查看预览",titlePreview:"标题：",bodyPreview:"正文：",resetToDefault:"恢复默认",titleRequired:"标题为必填项",bodyRequired:"正文为必填项",notificationLog:"通知日志",showFailedOnly:"仅显示失败",last24Hours:"最近 24 小时",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",justNow:"刚刚",noFailedNotifications:"没有失败的通知",noNotificationsLogged:"没有通知记录",unknownProvider:"未知提供商",logTitle:"标题",logMessage:"消息",logError:"错误",logProvider:"提供商：{{type}}",logTime:"时间：{{time}}",refresh:"刷新",clearOld:"清除旧记录",statsSummary:"最近 {{days}} 天：",statsNotifications:"条通知",statsSent:"{{count}} 条已发送",statsFailed:"{{count}} 条失败",eventTypes:{print_start:"打印已开始",print_complete:"打印完成",print_failed:"打印失败",print_stopped:"打印已停止",print_progress:"进度",printer_offline:"打印机离线",printer_error:"打印机错误",filament_low:"耗材不足",maintenance_due:"需要维护",test:"测试"},userEmail:{title:"通知",emailNotifications:"邮件通知",emailNotificationsDesc:"接收您自己打印任务的邮件通知。邮件将通过高级身份验证中配置的 SMTP 设置发送。",sendingTo:"通知将发送至",noEmailWarning:"您的账户没有邮件地址。请联系管理员添加。",printJobNotifications:"打印任务通知",printJobNotificationsDesc:"选择哪些事件会触发您提交的打印任务的邮件通知。",printJobStarts:"打印任务开始",printJobStartsDesc:"当您的打印任务开始时收到通知。",printJobFinishes:"打印任务完成",printJobFinishesDesc:"当您的打印任务成功完成时收到通知。",printErrors:"打印错误",printErrorsDesc:"当您的打印任务失败或遇到错误时收到通知。",printJobStops:"打印任务停止",printJobStopsDesc:"当您的打印任务被取消或停止时收到通知。",saveSuccess:"通知偏好设置已保存。",saveError:"保存通知偏好设置失败。"}},richTextEditor:{bold:"粗体",italic:"斜体",underline:"下划线",bulletList:"无序列表",numberedList:"有序列表",alignLeft:"左对齐",alignCenter:"居中对齐",alignRight:"右对齐",addLink:"添加链接",removeLink:"移除链接"},externalLinks:{noLinksConfigured:"未配置外部链接",deleteLink:"删除链接",removeCustomIcon:"移除自定义图标",openInNewTab:"在新标签页中打开",placeholders:{linkName:"我的链接"}},keyboardShortcuts:{title:"键盘快捷键",navigation:"导航",archivesSection:"归档",kProfilesSection:"K 值配置",generalSection:"通用",shortcuts:{goToPrinters:"前往打印机",goToArchives:"前往归档",goToQueue:"前往队列",goToStats:"前往统计",goToProfiles:"前往云端配置",goToSettings:"前往设置",focusSearch:"聚焦搜索",openUploadModal:"打开上传对话框",clearSelection:"清除选择 / 取消焦点",contextMenu:"卡片右键菜单",refreshProfiles:"刷新配置",newProfile:"新建配置",exitSelectionMode:"退出选择模式",showHelp:"显示此帮助"},footer:"按 Esc 或点击外部关闭"},notificationLog:{title:"通知日志",events:{printStarted:"打印开始",printComplete:"打印完成",printFailed:"打印失败",printStopped:"打印停止",progress:"进度",printerOffline:"打印机离线",printerError:"打印机错误",lowFilament:"耗材不足",maintenanceDue:"维护到期",test:"测试"},timeAgo:{justNow:"刚刚",minutesAgo:"{{minutes}} 分钟前",hoursAgo:"{{hours}} 小时前"}},restoreBackup:{title:"恢复备份",restoring:"恢复中...",restoreComplete:"恢复完成",restoreFailed:"恢复失败",importSettings:"从备份文件导入设置",pleaseWait:"请稍候，正在恢复您的数据",clickToSelect:"点击选择备份文件（.json 或 .zip）",howDuplicateHandling:"重复处理方式：",categories:{printers:"打印机",smartPlugs:"智能插座",notificationProviders:"通知提供商",filaments:"耗材",archives:"归档",pendingUploads:"待处理上传",settingsTemplates:"设置和模板"},matchingInfo:{printers:"按序列号匹配",smartPlugs:"按 IP 地址匹配",notificationProviders:"按名称匹配",filaments:"按名称 + 类型 + 品牌匹配",archives:"按内容哈希匹配",pendingUploads:"按文件名匹配",settingsTemplates:"始终覆盖"},replaceExisting:"替换现有数据",keepExisting:"保留现有数据",replaceDescription:"用备份数据覆盖已存在的项目",keepDescription:"仅恢复不存在的项目",caution:"注意：",cautionText:"覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问码永远不会被覆盖。",itemsRestored:"已恢复项目",itemsSkipped:"已跳过项目",restored:"已恢复",skipped:"已跳过（已存在）",filesLabel:"文件（3MF、缩略图等）",newApiKeysGenerated:"已生成新 API 密钥",newApiKeysWarning:"这些密钥仅显示一次。请立即复制！",processingBackup:"处理备份文件中...",noDataFound:"备份文件中未找到可恢复的数据。",failedToRestore:"恢复备份失败。请检查文件格式。"},backupExport:{title:"导出备份",selectData:"选择要包含的数据",selectAll:"全选",selectNone:"全不选",categoryDescriptions:{settings:"语言、主题、更新偏好",notifications:"ntfy、Pushover、Discord 等",templates:"自定义消息模板",smartPlugs:"Tasmota 插座配置",externalLinks:"侧边栏外部服务链接",printers:"打印机信息（不含访问码）",plateDetection:"空打印板参考图像",filaments:"耗材类型和成本",maintenance:"自定义维护计划",archives:"所有打印数据 + 文件（3MF、缩略图、照片）",projects:"项目、材料清单和附件",pendingUploads:"虚拟打印机待审核的上传",apiKeys:"Webhook API 密钥（导入时生成新密钥）"},requiresPrinters:"需要选择打印机",zipFileWarning:"将创建 ZIP 文件。",zipFileDescription:"包括所有 3MF 文件、缩略图、延时摄影和照片。这可能需要一些时间并生成较大的文件。",includeAccessCodes:"包含访问码",includeAccessCodesDescription:"用于转移到另一台机器",includeAccessCodesWarning:"访问码将以明文形式包含。请妥善保管此备份文件！",categoriesSelected:"已选择 {{selectedCount}} 个类别"},pendingUploads:{placeholders:{notes:"添加关于此打印的备注..."},discardUpload:"丢弃上传",archiveAllUploads:"归档所有上传",discardAllUploads:"丢弃所有上传",archive:"归档",timeAgo:{justNow:"刚刚",minutesAgo:"{{minutes}} 分钟前",hoursAgo:"{{hours}} 小时前",daysAgo:"{{days}} 天前"}},apiBrowser:{placeholders:{requestBody:"JSON 请求体...",searchEndpoints:"搜索端点..."}},configureAmsSlot:{title:"配置 AMS 槽位",slotConfigured:"槽位已配置！",configuringSlot:"正在配置槽位：",slotLabel:"{{ams}} 槽位 {{slot}}",searchPresets:"搜索预设...",colorPlaceholder:"颜色名称或十六进制（例如：棕色、FF8800）",clearCustomColor:"清除自定义颜色",noCloudPresets:"无云端预设。登录拓竹云以同步。",noPresetsAvailable:"无可用预设。登录拓竹云或导入本地配置。",noMatchingPresets:"未找到匹配的预设。",custom:"自定义",builtin:"内置",settingsSentToPrinter:"设置已发送到打印机",filamentProfile:"耗材配置",kProfileLabel:"K 值配置（压力推进）",filteringFor:"筛选：{{material}}",noKProfile:"无 K 值配置（使用默认值 0.020）",noMatchingKProfiles:"未找到匹配的 K 值配置。将使用默认 K=0.020。",selectFilamentFirst:"请先选择耗材配置",kFromCalibration:"K={{value}}（来自打印机校准）",customColorLabel:"自定义颜色（可选）",presetColors:"{{name}} 颜色：",showLessColors:"显示更少颜色",showMoreColors:"显示更多颜色",clear:"清除",hexLabel:"十六进制：#{{hex}}",resetting:"重置中...",resetSlot:"重置槽位",cancel:"取消",configuring:"配置中...",configureSlot:"配置槽位"},githubBackup:{title:"GitHub 备份",history:"历史",downloadBackup:"下载备份",restoreBackup:"恢复备份",noBackupsYet:"暂无备份"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"搜索标签...",renameTag:"重命名标签",deleteTag:"删除标签"},notificationTemplates:{placeholders:{title:"通知标题...",body:"通知正文..."}},batchTag:{placeholders:{newTag:"输入新标签..."}},photoGallery:{deletePhoto:"删除照片"},filamentHoverCard:{copySpoolUuid:"复制耗材 UUID"},kProfilesView:{hasNote:"有备注",copyProfile:"复制配置"},layout:{openMenu:"打开菜单",noPermissionSystemInfo:"您没有查看系统信息的权限"},dashboard:{dragToReorder:"拖动以重新排列",hideWidget:"隐藏小部件"},notificationProviderCard:{deleteNotificationProvider:"删除通知提供商"},fileManagerModal:{closeFileManager:"关闭文件管理器",sortFiles:"排序文件",goToParentFolder:"返回上级文件夹",threeView:"3D 视图"},embeddedCameraViewer:{refreshStream:"刷新流",close:"关闭",zoomOut:"缩小",resetZoom:"重置缩放",zoomIn:"放大",dragToResize:"拖动调整大小"},timelapseViewer:{skipBack5s:"后退 5 秒",skipForward5s:"前进 5 秒"},notificationProviders:{descriptions:{email:"SMTP 邮件通知",telegram:"通过 Telegram 机器人通知",discord:"通过 Webhook 发送到 Discord 频道",ntfy:"免费、可自托管的推送通知",pushover:"简单、可靠的推送通知",callmebot:"通过 CallMeBot 的免费 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL"}},logViewer:{searchPlaceholder:"搜索消息或日志名称...",noLogEntries:"未找到日志条目"},switchbarPopover:{noSwitchesInSwitchbar:"切换栏中没有开关"},projectPageModal:{placeholders:{title:"标题",designer:"设计师",license:"许可证",description:"输入描述...",profileTitle:"配置标题",profileDescription:"配置描述..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"等待中",justNow:"刚刚",now:"现在",minsAgo:"{{count}} 分钟前",inMins:"{{count}} 分钟后",hoursAgo:"{{count}} 小时前",inHours:"{{count}} 小时后",daysAgo:"{{count}} 天前",inDays:"{{count}} 天后"},spoolbuddy:{nav:{dashboard:"仪表板",ams:"AMS",inventory:"库存",writeTag:"写入",settings:"设置"},status:{nfcReady:"NFC 就绪",nfcOff:"NFC 关闭",offline:"离线",online:"在线",noPrinters:"无打印机",deviceOffline:"设备离线",waitingConnection:"等待设备连接...",systemReady:"系统就绪",status:"状态"},dashboard:{readyToScan:"准备扫描",idleMessage:"将耗材放在秤上以识别",nfcHint:"NFC 标签将自动读取",device:"设备",syncWeight:"同步重量",weightSynced:"已同步！",unknownTag:"未知标签",newTag:"检测到新标签",onScale:"在秤上",linkSpool:"链接到耗材",linkTagTitle:"将标签链接到耗材",linkTag:"链接标签",selectSpool:"选择要链接此标签的耗材：",noUntagged:"未找到没有标签的耗材",tagDetected:"检测到标签",noTag:"无标签",tagId:"标签",grossWeight:"毛重",spoolSize:"耗材盘尺寸",close:"关闭",currentSpool:"当前耗材",plateReady:"热床就绪: {{name}}",plateReadyLabel:"待清理的热床",plateClearAction:"清理",plateClearedToast:"已将热床标记为已清理",plateClearFailed:"无法将热床标记为已清理"},modal:{spoolDetected:"检测到耗材",assignToAms:"分配到 AMS",syncWeight:"同步重量",weightSynced:"已同步！",syncing:"同步中...",newTagDetected:"检测到新标签",addToInventory:"添加到库存",assignToAmsTitle:"分配到 AMS",selectSlot:"选择槽位",assign:"分配",assigning:"分配中...",assignSuccess:"已分配！",assignError:"分配耗材失败。请重试。",noPrinterSelected:"选择打印机...",noAmsDetected:"此打印机未检测到 AMS",slot:"槽位"},weight:{noReading:"无读数",stable:"稳定",measuring:"测量中...",tare:"去皮",calibrate:"校准"},spool:{remaining:"剩余",material:"材料",brand:"品牌",color:"颜色",coreWeight:"空盘",labelWeight:"标签",scaleWeight:"秤重",netWeight:"净重",lastUsed:"上次使用"},ams:{noData:"未检测到 AMS",connectAms:"连接 AMS 以查看耗材槽位",noPrinter:"未选择打印机",selectPrinter:"从顶部栏选择打印机",printerDisconnected:"打印机已断开",humidity:"湿度",level:"余量",active:"活跃",slot:"槽位",empty:"空"},inventory:{search:"搜索耗材...",empty:"库存中没有耗材",noResults:"没有匹配的耗材",spools:"个耗材",addSpool:"添加耗材"},settings:{tabDevice:"设备",tabDisplay:"显示",tabScale:"秤",tabUpdates:"更新",nfcReader:"NFC 读卡器",type:"类型",connection:"连接",notConnected:"不适用",deviceInfo:"设备信息",hostname:"主机",uptime:"运行时间",systemConfig:"后端与认证",backendUrl:"Bambuddy 后端 URL",apiToken:"API 令牌",apiTokenPlaceholder:"输入 API 令牌",saveConfig:"保存配置",systemQueued:"配置已加入队列。",nfcDiagnostic:"NFC 诊断",scaleDiagnostic:"秤诊断",readTagDiagnostic:"读取标签诊断",testNfc:"测试读卡器",testScale:"测试精度",testReadTag:"读取标签",systemFieldsRequired:"后端 URL 为必填项。",brightness:"亮度",saved:"已保存",noBacklight:"未检测到 DSI 背光。亮度控制需要 DSI 显示屏。",screenBlank:"屏幕熄灭超时",screenBlankDesc:"不活动后屏幕关闭。触摸唤醒。",displayNote:"亮度作为软件滤镜应用。",scaleCalibration:"秤校准",currentWeight:"当前重量",tareOffset:"去皮",calFactor:"系数",knownWeight:"已知重量",calStep1:"移除秤上所有物品并按设置零点。",calStep2:"将已知重量放在秤上。",setZero:"设置零点",calibrateNow:"校准",calibrated:"已校准",tareSet:"去皮命令已发送。等待设备响应...",tareFailed:"发送去皮命令失败",zeroSet:"零点已设置。将已知重量放在秤上。",calibrationDone:"校准完成！",calibrationFailed:"校准失败",lastCalibrated:"上次校准",stable:"稳定",settling:"稳定中...",firmware:"固件",scale:"秤",noDevice:"未找到 SpoolBuddy 设备",daemonVersion:"守护进程版本",currentVersion:"当前",versionPending:"等待守护进程...",checking:"检查中...",checkUpdates:"检查更新",updateAvailable:"有可用更新",updateInstructions:"通过 SSH 更新：运行 SpoolBuddy 安装脚本进行升级。",upToDate:"已是最新",includeBeta:"包含测试版本"},writeTag:{tabExisting:"现有耗材",tabNew:"新耗材",tabReplace:"替换标签",searchPlaceholder:"按材料、颜色、品牌搜索...",noUntaggedSpools:"没有无标签的耗材",noTaggedSpools:"没有有标签的耗材",selectSpool:"选择一个耗材，然后将空白 NTAG 放在读卡器上",placeTag:"将 NTAG 放在读卡器上",tagReady:"检测到标签 — 准备写入",writeTag:"写入标签",replaceTag:"替换标签",writing:"写入标签中...",waiting:"等待 SpoolBuddy...",writeSuccess:"标签写入成功！",writeFailed:"写入失败",queueFailed:"排队写入命令失败",tryAgain:"重试",cancel:"取消",replaceWarning:"旧标签将被取消链接。新标签将替换它。",deviceOffline:"SpoolBuddy 离线",material:"材料",colorName:"颜色名称",color:"颜色",brand:"品牌",weight:"重量 (g)",createSpool:"创建耗材",creating:"创建中...",spoolCreated:"耗材已创建！准备写入。",createFailed:"创建耗材失败"},quickMenu:{printerPower:"打印机电源",systemControls:"系统",restartDaemon:"重启守护进程",restartBrowser:"重启浏览器",reboot:"重启",shutdown:"关机",swipeToClose:"向下滑动关闭",confirmTitle:"确认",confirmShutdown:"确定要关闭SpoolBuddy吗？您需要物理访问才能重新开启。",confirmReboot:"确定要重启SpoolBuddy吗？",confirmRestartDaemon:"重启SpoolBuddy守护进程？NFC和秤将暂时不可用。",confirmRestartBrowser:"重启kiosk浏览器？屏幕将短暂变黑。",confirm:"确认",confirmPlugOn:"开启 {{name}}？",confirmPlugOff:"关闭 {{name}}？",turnOn:"开启",turnOff:"关闭"}},bugReport:{title:"报告错误",description:"描述",descriptionPlaceholder:"出了什么问题？请描述问题...",email:"邮箱（可选）",emailPlaceholder:"your@email.com",emailPrivacy:"如果提供，您的邮箱将包含在GitHub Issue的折叠部分中，以便维护者后续跟进。",screenshot:"截图",uploadOrPaste:"上传、粘贴或拖拽图片",dataCollectedSummary:"报告中包含哪些数据？",dataIncluded:"包含：",dataIncludedList:"应用版本、操作系统、架构、Python版本、数据库统计（仅计数）、打印机型号、喷嘴数量、固件版本、连接状态、集成状态（Spoolman、MQTT、HA）、非敏感设置、网络接口数量、Docker详情、依赖版本。",dataNeverIncluded:"绝不包含：",dataNeverIncludedList:"打印机名称、序列号、访问代码、密码、IP地址、邮箱地址、API密钥、令牌、Webhook URL、主机名或用户名。",submit:"提交",startLogging:"开始调试日志",stepEnableLogging:"调试日志已启用",stepReproduce:"请现在重现问题",stepStopLogging:"停止并提交报告",stopAndSubmit:"停止并提交",maxDuration:"{{minutes}}分钟后自动停止",stoppingLogs:"正在收集日志并提交...",submitting:"正在提交错误报告...",submitSuccess:"错误报告提交成功！",submitFailed:"提交错误报告失败",thankYou:"谢谢！",submitted:"您的错误报告已提交。",viewIssue:"查看Issue",unexpectedError:"发生了意外错误"},failureDetection:{title:"AI 故障检测",description:"通过自托管的 Obico ML API 监控打印,并对检测到的故障自动采取行动。",mlUrl:"Obico ML API 地址",mlUrlHint:"您自托管的 Obico ml_api 容器的基础 URL(例如 http://192.168.1.10:3333)。",test:"测试",testSuccess:"ML API 可访问且正常。",testFailed:"无法访问 ML API。",sensitivity:"灵敏度",sensitivityLow:"低(减少误报)",sensitivityMedium:"中(平衡)",sensitivityHigh:"高(更早检测,更多误报)",sensitivityHint:"调整触发警告和故障的置信度阈值。",action:"检测到故障时的操作",actionNotify:"仅通知",actionPause:"暂停打印",actionPauseOff:"暂停并切断电源",pollInterval:"检查间隔(秒)",pollIntervalHint:"打印过程中每台打印机的检查频率。最小 5 秒,最大 120 秒。",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"监控的打印机",perPrinterHint:"选择检测服务要监视哪些打印机。",monitorAll:"监控所有已连接的打印机",statusTitle:"状态",serviceRunning:"服务运行中",thresholds:"低 / 高阈值",activePrinters:"活动打印",noActivePrints:"当前没有正在进行的打印。",historyTitle:"最近检测",noHistory:"暂无检测记录。"},makerworld:{title:"MakerWorld",description:"粘贴 MakerWorld 模型链接，即可直接在 Bambuddy 中导入并打印 —— 无需切换到 Bambu Handy 应用。",pasteUrlHeader:"从 MakerWorld 导入",pasteUrlPlaceholder:"https://makerworld.com/en/models/… 或粘贴任意 MakerWorld 链接",resolveButton:"解析",signInRequiredTitle:"下载需要登录 Bambu Cloud",signInRequiredBody:"您可以匿名浏览模型详情，但下载 3MF 文件需要 Bambu Cloud 账户。",openCloudSettings:"打开云设置",untitledModel:"无标题模型",byCreator:"作者: {{name}}",downloadsCount:"{{count}} 次下载",licensePrefix:"许可协议",alreadyImported:"已在资料库中",openOnMakerworld:"在 MakerWorld 中打开",alreadyInLibrary:"此模型已在您的资料库中 —— 可在文件管理器 → MakerWorld 中找到",importSuccess:"已导入 {{filename}} —— 已保存到文件管理器 → MakerWorld",platesHeader:"打印板 ({{count}})",plateDefaultName:"打印板 {{n}}",materialCount:"{{count}} 种耗材",amsRequired:"需要 AMS",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"保存",sliceIn:"保存并在 {{slicer}} 中切片",disclaimer:"MakerWorld 集成使用由社区记录的 API 接口。Bambuddy 与 MakerWorld 或 Bambu Lab 没有从属或认可关系。",lastImportSuccess:"已导入到您的资料库",lastImportAlreadyInLibrary:"已存在于您的资料库中",viewInLibrary:"在文件管理器中查看",openInBambuStudio:"在 Bambu Studio 中打开",openInOrcaSlicer:"在 OrcaSlicer 中打开",importTo:"导入到文件管理器",recentImportsHeader:"最近导入",phaseResolving:"解析中",phaseDownloading:"下载中",folderAuto:"MakerWorld (默认)",importAll:"全部导入",importAllProgress:"正在导入 {{current}}/{{total}}",openGallery:"打开图片库",galleryPrev:"上一张",galleryNext:"下一张",deleteImport:"从资料库中移除",importDeleting:"正在移除…",importDeleted:"已从资料库中移除",confirmDelete:"从资料库中移除 {{filename}}？本地文件将被删除，但可以从 MakerWorld 重新导入。",errors:{resolveFailed:"无法解析该 MakerWorld 链接。",downloadFailed:"下载失败。请重试。",deleteFailed:"无法从资料库中移除文件。"}},libraryTrash:{title:"回收站",headerButton:"回收站",headerTooltip:"查看已移至回收站的文件",backToFiles:"返回文件管理器",subtitleAdmin:"已删除的文件会在回收站保留 {{days}} 天，之后自动删除。此视图显示所有用户的回收站。",subtitleUser:"已删除的文件会在回收站保留 {{days}} 天，之后自动删除。",loading:"正在加载回收站…",loadError:"无法加载回收站。",empty:"回收站为空。",summary:"{{count}} 个文件 · {{size}}",emptyTrash:"清空回收站",restore:"还原",purgeNow:"立即删除",autoPurgeIn:"将于 {{when}} 自动删除",days:"天",retentionLabel:"自动删除时间",selectAll:"全选",selectOne:"选择 {{filename}}",selectionCount:"已选择 {{count}} 项",bulkRestore:"还原所选",bulkPurge:"删除所选",col:{filename:"文件",folder:"文件夹",size:"大小",deleted:"移入回收站",autoPurge:"自动删除",owner:"所有者",actions:"操作"},confirm:{purgeTitle:"永久删除？",purgeBody:"{{filename}} 将从磁盘中删除，无法恢复。",emptyTitle:"清空回收站？",emptyBody:"全部 {{count}} 个文件将从磁盘中删除。此操作无法撤消。",bulkPurgeTitle:"永久删除所选文件？",bulkPurgeBody:"所选的 {{count}} 个文件将从磁盘中删除，无法恢复。",cta:"永久删除"},toast:{restored:"文件已还原。",restoreFailed:"无法还原文件。",purged:"文件已永久删除。",purgeFailed:"无法删除文件。",emptied:"已从回收站删除 {{count}} 个文件。",emptyFailed:"无法清空回收站。",retentionSaved:"自动删除已设置为 {{days}} 天。",retentionFailed:"无法保存保留设置。",bulkRestored:"已还原 {{count}} 个文件。",bulkPurged:"已删除 {{count}} 个文件。"}},libraryPurge:{title:"清理旧文件",headerButton:"清理旧文件",headerTooltip:"批量将旧文件移至回收站",description:"早于所选阈值的文件将被移至回收站。外部文件夹会被跳过。在自动删除之前，您可以从回收站还原文件。",ageLabel:"移动早于以下天数的文件",days:"天",includeNeverPrinted:"包括从未打印过的文件",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"正在检查匹配的文件数量…",previewFailed:"无法预览清理结果。",previewSummary:"{{count}} 个文件 · {{size}} 将被移至回收站",andMore:"…还有 {{count}} 个",warning:"文件将被软删除——在保留期结束前，您可以从回收站还原它们。",confirmCta:"将 {{count}} 个移至回收站",purging:"正在移至回收站…",toast:{success:"已将 {{count}} 个文件移至回收站。",failed:"无法清理文件。"}},libraryAutoPurge:{enableLabel:"自动清理旧文件",enableDescription:"每天执行一次管理员清理。文件会先进入回收站——不会立即删除。",ageLabel:"自动清理早于以下天数的文件",ageDescription:"最少 7 天，最多 10 年。使用与手动「清理旧文件」按钮相同的时间规则。",days:"天",includeNeverPrinted:"包括从未打印过的文件",saveFailed:"无法保存自动清理设置。"},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},Cme={nav:{printers:"印表機",archives:"歸檔",queue:"佇列",stats:"統計",profiles:"設定檔案",maintenance:"維護",projects:"專案",inventory:"耗材",files:"檔案管理器",makerworld:"MakerWorld",notifications:"通知",settings:"設定",system:"系統",collapseSidebar:"收起側邊欄",expandSidebar:"展開側邊欄",update:"更新",updateAvailable:"有可用更新：v{{version}}",updateAvailableBanner:"版本 {{version}} 已發布！",viewUpdate:"檢視更新",viewOnGithub:"在 GitHub 上檢視",keyboardShortcuts:"鍵盤快捷鍵 (?)",switchToLight:"切換到淺色模式",switchToDark:"切換到深色模式",smartSwitches:"智慧開關",logout:"登出"},common:{save:"儲存",saving:"儲存中...",cancel:"取消",delete:"刪除",edit:"編輯",add:"新增",close:"關閉",confirm:"確認",loading:"載入中...",error:"錯誤",success:"成功",warning:"警告",enabled:"已啟用",disabled:"已停用",yes:"是",no:"否",on:"開",off:"關",all:"全部",none:"無",search:"搜尋",filter:"篩選",sort:"排序",refresh:"重新整理",download:"下載",upload:"上傳",uploading:"上傳中...",uploadFailed:"上傳失敗",actions:"操作",status:"狀態",name:"名稱",description:"描述",date:"日期",time:"時間",hours:"小時",minutes:"分鐘",seconds:"秒",days:"天",enable:"啟用",disable:"停用",permissions:"權限",noPrinters:"未設定印表機",noData:"尚無資料",linkNotFound:"未找到連結",required:"必填",optional:"可選",dismiss:"關閉",apply:"套用",reset:"重設",export:"匯出",import:"匯入",clear:"清除",selectAll:"全選",deselectAll:"取消全選",noChange:"— 不更改 —",unchanged:"未更改",unassigned:"未分配",unknown:"未知",unknownError:"未知錯誤",today:"今天",tomorrow:"明天",asap:"儘快",overdue:"已逾期",now:"現在",collapse:"收起",expand:"展開",viewArchive:"檢視歸檔",viewInFileManager:"在檔案管理器中檢視",addedBy:"由 {{username}} 新增",prints:"次列印",more:"還有 {{count}} 個",ascending:"升序",descending:"降序",back:"返回",copy:"複製",copied:"已複製!",printer:"印表機",remove:"移除",type:"類型",print:"列印",rename:"重新命名",move:"移動",create:"建立",duplicate:"複製",left:"左",right:"右"},printers:{title:"印表機",addPrinter:"新增印表機",editPrinter:"編輯印表機",deletePrinter:"刪除印表機",printerName:"印表機名稱",serialNumber:"序列號",ipAddress:"IP 位址 / 主機名稱",accessCode:"存取碼",model:"型號",nozzleCount:"噴嘴數量",autoArchive:"自動歸檔",status:{available:"可用",idle:"空閒",printing:"列印中",paused:"已暫停",offline:"離線",problem:"故障",error:"錯誤",finished:"已完成",unknown:"未知"},temperatures:{nozzle:"噴嘴",bed:"熱床",chamber:"腔室"},progress:"{{percent}}% 完成",timeRemaining:"剩餘 {{time}}",deleteConfirm:'確定要刪除"{{name}}"嗎？',maintenanceOk:"維護正常",maintenanceWarning:"{{count}} 個警告",maintenanceWarning_plural:"{{count}} 個警告",maintenanceDue:"{{count}} 個到期",maintenanceDue_plural:"{{count}} 個到期",sort:{name:"名稱",status:"狀態",model:"型號",location:"位置",ascending:"升序排列",descending:"降序排列"},cardSize:{small:"小卡片",medium:"中卡片",large:"大卡片",extraLarge:"超大卡片"},hideOffline:"隱藏離線",nextAvailable:"下一個可用",powerOn:"開機",offlinePrintersWithPlugs:"帶智慧插座的離線印表機",noPrintersConfigured:"尚未設定印表機",search:"搜尋印表機...",noSearchResults:"沒有印表機符合您的搜尋或篩選條件",filter:{allStatuses:"所有狀態",allLocations:"所有位置"},readyToPrint:"準備列印",external:"外部",extL:"外接左",extR:"外接右",deleteArchives:"刪除列印歸檔",noLabel:"無標籤",printPreview:"列印預覽",width:"寬度",height:"高度",noObjectsFound:"未找到物件",objectsLoadedOnPrintStart:"物件在列印開始時載入",willBeSkipped:"將被跳過",name:"名稱",serialCannotBeChanged:"序列號無法更改",locationHelp:"用於分組印表機和篩選佇列任務",wifiSignal:{veryWeak:"非常弱",weak:"弱",fair:"一般",good:"良好",excellent:"優秀"},maintenanceUpToDate:"所有維護均已完成 - 點選檢視",chamberLightOn:"開啟腔室燈",chamberLightOff:"關閉腔室燈",files:"檔案",browseFiles:"瀏覽印表機檔案",autoOffAfterPrint:"列印後自動關機",autoOffExecuted:"已執行自動關機 - 開啟印表機以重設",hmsErrors:"HMS 錯誤",viewHmsErrors:"檢視 {{count}} 個 HMS 錯誤",resume:"繼續",pause:"暫停",stop:"停止",camera:"攝影機",skipObject:"跳過物件",reconnect:"重新連線",forceRefresh:"強制重新整理",forceRefreshSuccess:"已請求重新整理",mqttDebug:"MQTT 偵錯",printerInformation:"印表機資訊",copyToClipboard:"複製",copied:"已複製！",state:"狀態",wifiSignalLabel:"Wi-Fi 訊號",developerMode:"開發者模式",enabled:"已啟用",disabled:"已停用",addedOn:"新增日期",sdCard:"SD 卡",inserted:"已插入",notInserted:"未插入",totalPrintHours:"列印時長",activeNozzle:"目前：{{nozzle}} 噴嘴",nozzleRack:"噴嘴架",nozzleDocked:"已停靠",nozzleMounted:"已安裝",nozzleActive:"使用中",nozzleIdle:"空閒",nozzleDiameter:"直徑",nozzleType:"類型",nozzleStatus:"狀態",nozzleFilament:"耗材",nozzleWear:"磨損",nozzleMaxTemp:"最高溫度",nozzleSerial:"序列號",nozzleHardenedSteel:"硬化鋼",nozzleStainlessSteel:"不鏽鋼",nozzleTungstenCarbide:"碳化鎢",nozzleFlow:"流量",nozzleHighFlow:"高流量",nozzleStandardFlow:"標準",firmwareUpdate:"韌體更新",firmwareInstructions:"在印表機觸控式螢幕上，前往",firmwareNav:"導航到",settings:"設定",firmware:"韌體",discoverPrinters:"發現印表機",searching:"搜尋中...",manualEntry:"手動輸入",addFromCloud:"從雲端新增",toast:{printerDeleted:"印表機已刪除",missingSpoolAssignment:"已在{{printer}}上開始列印。以下料槽未分配耗材: {{slots}}",printerAdded:"印表機已新增",printerUpdated:"印表機已更新",failedToDelete:"刪除印表機失敗",failedToAdd:"新增印表機失敗",failedToUpdate:"更新印表機失敗",commandSent:"命令已傳送",failedToSendCommand:"傳送命令失敗",turnedOn:"{{name}} 已開啟",failedToPowerOn:"開啟 {{name}} 失敗",scriptTriggered:"腳本已觸發",printStopped:"列印已停止",printPaused:"列印已暫停",printResumed:"列印已繼續",referenceDeleted:"參考已刪除",detectionAreaSaved:"檢測區域已儲存",failedToRunScript:"執行腳本失敗",failedToStopPrint:"停止列印失敗",failedToPausePrint:"暫停列印失敗",failedToResumePrint:"繼續列印失敗",failedToControlChamberLight:"控制腔室燈失敗",failedToSetSpeed:"設定列印速度失敗",failedToUpdateSetting:"更新設定失敗",failedToSkipObjects:"跳過物件失敗",failedToRereadRfid:"重新讀取 RFID 失敗",failedToCheckPlate:"檢查列印板失敗",failedToUpdateLabel:"更新標籤失敗",failedToDeleteReference:"刪除參考失敗",failedToSaveDetectionArea:"儲存檢測區域失敗",plateCheckEnabled:"列印板檢查已啟用",plateCheckDisabled:"列印板檢查已停用",calibrationSaved:"校準已儲存！",calibrationFailed:"校準失敗",rfidRereadInitiated:"已發起 RFID 重新讀取"},connection:{connected:"已連線",offline:"離線"},plateStatus:{markCleared:"將列印板標記為已清理",cleared:"列印板已清理",notCleared:"列印板未清理",inUse:"列印板使用中"},queue:{inQueue:"佇列中有 {{count}} 個列印任務",inQueue_plural:"佇列中有 {{count}} 個列印任務"},controls:"控制",rfid:{reread:"重新讀取 RFID"},bedJog:{title:"移動熱床",bed:"熱床",step:"步長 (mm)",up:"熱床上移",down:"熱床下移",disabledWhilePrinting:"列印中已停用",notHomedTitle:"印表機未歸零",notHomedMessage:"印表機自上次列印以來尚未歸零。請先執行自動歸零以確保安全定位（先停放噴頭，然後歸零 X、Y 和 Z），或者直接移動 — 軟限位將被繞過。",homeZ:"自動歸零",moveAnyway:"強制移動",homingStarted:"印表機自動歸零中…"},permission:{noAdd:"您沒有新增印表機的權限",noEdit:"您沒有編輯印表機的權限",noDelete:"您沒有刪除印表機的權限",noControl:"您沒有控制印表機的權限",noFiles:"您沒有存取印表機檔案的權限",noAmsRfid:"您沒有重新讀取 AMS RFID 的權限",noSmartPlugControl:"您沒有控制智慧插座的權限",noCamera:"您沒有檢視攝影機的權限"},modal:{addTitle:"新增印表機",editTitle:"編輯印表機",myPrinter:"我的印表機",selectModel:"選擇型號...",locationGroup:"位置 / 分組（可選）",locationPlaceholder:"例如：工作室、辦公室、地下室",autoArchiveLabel:"自動歸檔已完成的列印",fromPrinterSettings:"來自印表機設定",modelOptional:"型號（可選）",saveChanges:"儲存更改"},skipObjects:{tooltip:"跳過物件",onlyWhilePrinting:"跳過物件（僅在列印時）",requiresMultiple:"跳過物件（需要2個以上物件）",title:"跳過物件",matchIdsInfo:"將 ID 與印表機螢幕上的 ID 進行對照",printerShowsIds:"印表機螢幕上顯示列印板上物件的 ID",skipSelected:"跳過所選",skipping:"跳過中...",noObjectsSelected:"未選擇物件",selectObjectsToSkip:"選擇要從目前列印中跳過的物件",skipped:"已跳過",objectsSkipped:"物件已跳過",activeCount:"{{count}} 個活躍",waitForLayer:"等待第2層以上才能跳過物件（目前第 {{layer}} 層）",skip:"跳過",confirmTitle:"跳過物件？",confirmMessage:'確定要跳過"{{name}}"嗎？此操作無法復原。'},confirm:{deleteTitle:"刪除印表機",deleteMessage:'確定要刪除"{{name}}"嗎？這將移除所有連線設定。',deleteArchivesNote:"此印表機的所有列印歷史將被永久刪除。",keepArchivesNote:"列印歷史將保留，但不再與此印表機連結。",stopTitle:"停止列印",stopMessage:'確定要停止"{{name}}"上的目前列印嗎？這將取消列印任務。',stopButton:"停止列印",pauseTitle:"暫停列印",pauseMessage:'確定要暫停"{{name}}"上的目前列印嗎？',pauseButton:"暫停列印",resumeTitle:"繼續列印",resumeMessage:'確定要繼續"{{name}}"上的列印嗎？',resumeButton:"繼續列印",powerOnTitle:"開啟印表機",powerOnMessage:'確定要開啟"{{name}}"的電源嗎？',powerOnButton:"開機",powerOffTitle:"關閉印表機",powerOffMessage:'確定要關閉"{{name}}"的電源嗎？',powerOffWarning:'警告："{{name}}"正在列印中！確定要關閉電源嗎？這將中斷列印並可能損壞印表機。',powerOffButton:"關機"},bulk:{select:"選擇",selectAll:"全選",selectByLocation:"按位置選擇",selected:"已選擇{{count}}臺",actions:{stop:"停止",pause:"暫停",resume:"繼續",clearPlate:"清除列印床",clearHMS:"清除通知"},confirm:{stopTitle:"停止{{count}}個列印任務",stopMessage:"這將取消{{count}}臺印表機上的活動列印任務。此操作無法復原。",stopButton:"全部停止",pauseTitle:"暫停{{count}}個列印任務",pauseMessage:"這將暫停{{count}}臺印表機上的活動列印任務。",pauseButton:"全部暫停",clearPlateTitle:"清除{{count}}個列印床",clearPlateMessage:"這將清除{{count}}臺印表機的列印床，可能會觸發佇列中的任務。",clearPlateButton:"全部清除"},success:"{{action}}已在{{count}}臺印表機上完成",partial:"{{succeeded}}成功，{{failed}}失敗",noneApplicable:"沒有選中的印表機處於適合此操作的狀態",selectByState:"按狀態選擇"},discovery:{title:"發現印表機",searching:"搜尋中...",scanning:"掃描中...",scanProgress:"掃描中... {{scanned}}/{{total}}",foundPrinters:"發現 {{count}} 臺印表機",noPrintersFound:"未找到印表機",noPrintersFoundSubnet:"在指定子網中未找到印表機。",noPrintersFoundNetwork:"在網路上未找到印表機。",allConfigured:"所有發現的印表機已設定完畢。",alreadyAdded:"已新增",select:"選擇",manualEntry:"手動輸入",addFromCloud:"從雲端新增",subnetToScan:"要掃描的子網",dockerNote:"偵測到 Docker 環境。請以 CIDR 格式輸入印表機所在子網。需要在 docker-compose.yml 中設定 network_mode: host。",scanSubnet:"掃描子網查詢印表機",discoverNetwork:"在網路上發現印表機",scanningSubnet:"正在掃描子網查詢拓竹印表機...",scanningNetwork:"正在掃描網路...",serialRequired:"需要序列號",unknown:"未知",failedToStart:"啟動發現失敗"},drying:{start:"開始乾燥",stop:"停止乾燥",temperature:"溫度",duration:"時長",hours:"小時",timeRemaining:"剩餘 {{time}}",active:"乾燥中",notSupported:"不支援乾燥",powerRequired:"連線AMS電源介面卡以啟用乾燥",startingDrying:"正在啟動乾燥...",stoppingDrying:"正在停止乾燥...",rotateTray:"乾燥時旋轉料盤"},filaments:"耗材",openCameraOverlay:"開啟攝影機疊加層",openCameraWindow:"在新視窗中開啟攝影機",firmwareUpdateAvailable:"韌體更新可用：{{current}} → {{latest}}",firmwareUpToDate:"韌體 {{version}} — 已是最新",firmwareUpdateButton:"更新",plateDetection:{noPermission:"您沒有更新印表機的權限",enabledClick:"列印板檢查已啟用 - 點選停用",disabledClick:"列印板檢查已停用 - 點選啟用",manageCalibration:"管理列印板檢測校準",calibrationRequired:"需要校準",calibrationInstructions:"請確保列印板<strong>完全空置</strong>，然後點選校準。",calibrationDescription:"校準會拍攝空置列印板的參考影像。後續檢查將與此參考進行比較以檢測物體。",calibrationTip:"<strong>提示：</strong>您最多可以為不同的列印板儲存5個校準。系統會在檢查時自動使用最佳匹配。",plateEmpty:"列印板似乎是空的",objectsDetected:"在列印板上偵測到物體",confidence:"置信度",difference:"差異",analysisPreview:"分析預覽：",analysisLegend:"綠色框 = 檢測區域，紅色覆蓋 = 與校準的差異",savedReferences:"已儲存的參考 ({{count}}/{{max}})",deleteReference:"刪除參考",labelPlaceholder:"標籤...",clickToEdit:"{{label}} - 點選編輯",clickToAddLabel:"點選新增標籤"},speed:{title:"列印速度",silent:"靜音 (50%)",standard:"標準 (100%)",sport:"運動 (124%)",ludicrous:"瘋狂 (166%)"},airduct:{title:"風道模式",cooling:"製冷",heating:"加熱"},noSdCard:"無SD",door:{open:"開",closed:"關"},fans:{partCooling:"零件冷卻風扇",auxiliary:"輔助風扇",chamber:"腔室風扇"},clickToViewHmsErrors:"點選檢視 HMS 錯誤",estimatedCompletion:"預計完成時間",plateNumber:"板 {{number}}",slotOptions:"槽位選項",amsPopup:{friendlyName:"AMS 名稱",friendlyNamePlaceholder:"例如 AMS 友好名稱",serialNumber:"序列號",firmwareVersion:"韌體",save:"儲存",clear:"清除",noEditPermission:"您沒有重新命名 AMS 單元的權限"},firmwareModal:{title:"韌體更新",titleUpToDate:"韌體資訊",currentVersion:"目前版本：",latestVersion:"最新版本：",releaseNotes:"發布說明",checkingPrereqs:"正在檢查前提條件...",sdCardReady:"SD 卡已就緒。點選下方上傳韌體。",uploadedSuccess:"韌體已上傳到 SD 卡！",applyInstructions:"在印表機上套用更新：",step1:"在印表機觸控式螢幕上，前往<strong>設定</strong>",step2:"導航到<strong>韌體</strong>",step3:"選擇<strong>從 SD 卡更新</strong>",step4:"更新將需要 10-20 分鐘",done:"完成",starting:"啟動中...",uploadFirmware:"上傳韌體",uploadFailed:"上傳啟動失敗：{{error}}",uploadedToast:"韌體已上傳！請在印表機螢幕上觸發更新。",availableVersions:"可用版本",usable:"可用",unavailable:"不可用",installed:"已安裝",newerBadge:"較新",olderBadge:"較舊",currentBadge:"目前"},accessCodePlaceholder:"留空以保持目前值",roi:{title:"檢測區域 (ROI)",xStart:"X 起點",yStart:"Y 起點",width:"寬度",height:"高度",instruction:"調整檢測區域以聚焦到列印板。預覽中的綠色框顯示目前區域。"},developerModeWarning:"以下印表機未啟用開發者區域網路模式：{{names}}。某些功能可能無法使用。",howToEnable:"如何啟用",incompatibleFile:"此檔案是為 {{slicedFor}} 切片的，但該印表機是 {{printerModel}}",dropNotPrintable:"只能列印 .gcode 和 .gcode.3mf 檔案",dropToPrint:"拖放以列印",cannotPrint:"印表機忙碌"},archives:{title:"列印歸檔",searchPlaceholder:"搜尋歸檔...",filterByPrinter:"按印表機篩選",filterByStatus:"按狀態篩選",sortBy:"排序方式",sortNewest:"最新優先",sortOldest:"最舊優先",sortName:"名稱",sortDuration:"時長",sortLargest:"最大優先",sortSmallest:"最小優先",sortSize:"大小",noArchives:"未找到歸檔",noArchivesSearch:"沒有匹配搜尋的歸檔",originalPrintNotVisible:"原始列印不可見 - 請嘗試清除篩選條件",noArchivesYet:"尚無歸檔",prints:"條列印",pagination:{showing:"顯示",to:"至",of:"共",show:"每頁",page:"頁",all:"全部"},loadingArchives:"載入歸檔中...",releaseToUpload:"放開以上傳",showAll:"顯示全部",showFavoritesOnly:"僅顯示收藏",gridView:"網格檢視",listView:"列表檢視",calendarView:"日曆檢視",logView:"列印日誌",manageTags:"管理標籤",showFailedPrints:"顯示失敗的列印",hideFailedPrints:"隱藏失敗的列印",hideDuplicates:"隱藏重複項",viewOriginalPrint:"點選檢視原始列印 (#{{id}})",printTime:"列印時間",filamentUsed:"耗材用量",cost:"成本",reprint:"重新列印",preview:"預覽",deleteArchive:"刪除歸檔",deleteConfirm:"確定要刪除此歸檔嗎？",favorite:"收藏",unfavorite:"取消收藏",viewDetails:"檢視詳情",status:{completed:"已完成",failed:"失敗",stopped:"已停止"},toast:{source3mfAttached:"源 3MF 已附加：{{filename}}",failedUploadSource3mf:"上傳源 3MF 失敗",source3mfRemoved:"源 3MF 已移除",failedRemoveSource3mf:"移除源 3MF 失敗",f3dAttached:"F3D 已附加：{{filename}}",failedUploadF3d:"上傳 F3D 失敗",f3dRemoved:"F3D 已移除",failedRemoveF3d:"移除 F3D 失敗",timelapseAttached:"縮時攝影已附加：{{filename}}",timelapseAlreadyAttached:"縮時攝影已附加",noMatchingTimelapse:"未找到匹配的縮時攝影",failedScanTimelapse:"掃描縮時攝影失敗",failedAttachTimelapse:"附加縮時攝影失敗",timelapseRemoved:"縮時攝影已移除",failedRemoveTimelapse:"移除縮時攝影失敗",timelapseUploaded:"縮時攝影已上傳：{{filename}}",failedUploadTimelapse:"上傳縮時攝影失敗",archiveDeleted:"歸檔已刪除",failedDeleteArchive:"刪除歸檔失敗",addedToFavorites:"已新增到收藏",removedFromFavorites:"已從收藏中移除",projectUpdated:"專案已更新",failedUpdateProject:"更新項目失敗",linkCopied:"連結已複製到剪貼簿",failedCopyLink:"複製連結失敗",photoDeleted:"照片已刪除",failedDeletePhoto:"刪除照片失敗",failedDeleteArchives:"刪除歸檔失敗",failedUpdateFavorites:"更新收藏失敗",exportDownloaded:"匯出已下載",exportFailed:"匯出失敗"},menu:{print:"列印",schedule:"排程",openInBambuStudio:"在切片軟體中開啟",slice:"切片",externalLink:"外部連結",viewOnMakerWorld:"在 MakerWorld 上檢視",preview3d:"3D 預覽",viewTimelapse:"檢視縮時攝影",scanForTimelapse:"掃描縮時攝影",uploadTimelapse:"上傳縮時攝影",removeTimelapse:"移除縮時攝影",downloadSource3mf:"下載源 3MF",uploadSource3mf:"上傳源 3MF",replaceSource3mf:"替換源 3MF",removeSource3mf:"移除源 3MF",uploadF3d:"上傳 F3D",replaceF3d:"替換 F3D",downloadF3d:"下載 F3D",removeF3d:"移除 F3D",download:"下載",copyDownloadLink:"複製下載連結",qrCode:"QR Code",viewPhotos:"檢視照片",viewPhotosCount:"檢視照片 ({{count}})",projectPage:"專案頁面",addToFavorites:"新增到收藏",removeFromFavorites:"從收藏中移除",edit:"編輯",goToProject:"前往專案：{{name}}",addToProject:"新增到專案",removeFromProject:"從專案中移除",loading:"載入中...",noProjectsAvailable:"無可用專案",searchProjects:"Search projects…",select:"選擇",deselect:"取消選擇",delete:"刪除"},permission:{noReprint:"您沒有重新列印此歸檔的權限",noAddToQueue:"您沒有新增到佇列的權限",noUpdateArchives:"您沒有更新歸檔的權限",noUploadFiles:"您沒有上傳檔案的權限",noDownload:"您沒有下載歸檔的權限",noCopyLink:"您沒有複製下載連結的權限",noDelete:"您沒有刪除此歸檔的權限",noCreate:"您沒有建立歸檔的權限"},platePicker:{title:"選擇要預覽的列印板",hint:"此存檔包含多個列印板。選擇一個在 GCode 檢視器中開啟。",plateLabel:"列印板 {{index}}",objectCount:"{{count}} 個物件",objectCount_plural:"{{count}} 個物件",noGcode:"此存檔沒有可預覽的已切片 G 代碼。請先在 Bambu Studio 中開啟並切片。"},card:{previousPlate:"上一個板",nextPlate:"下一個板",plateNumber:"板 {{index}}",moreOptions:"右鍵檢視更多選項",addToFavorites:"新增到收藏",removeFromFavorites:"從收藏中移除",cancelled:"已取消",failed:"失敗",duplicate:"重複",duplicateTitle:"此模型之前已列印過",openSource3mf:"在 Bambu Studio 中開啟源 3MF（右鍵檢視更多選項）",downloadF3d:"下載 Fusion 360 設計檔案",viewTimelapse:"檢視縮時攝影",viewPhoto:"檢視 1 張照片",viewPhotos:"檢視 {{count}} 張照片",openFolder:"開啟資料夾：{{name}}",slicedFile:"已切片檔案 - 可以列印",sourceFile:"僅原始檔 - 無 AMS 對應可用",gcode:"GCODE",source:"原始檔",project:"專案：{{name}}",estimated:"預計：{{time}}",actual:"實際：{{time}}",accuracy:"準確度：{{percent}}%",filament:"{{weight}}g",layer:"{{count}} 層",layers:"{{count}} 層",object:"{{count}} 個物件",objects:"{{count}} 個物件",slicedFor:"為 {{model}} 切片",uploadedBy:"上傳者",noPermissionReprint:"您沒有重新列印的權限",noFileForReprint:"無可用的 3MF 檔案 — 列印紀錄時無法從印表機下載該檔案",noPermissionEdit:"您沒有編輯歸檔的權限",noPermissionDelete:"您沒有刪除歸檔的權限",reprint:"重新列印",schedulePrint:"排程列印",schedule:"排程",openInBambuStudio:"在切片軟體中開啟",openInBambuStudioToSlice:"在切片軟體中開啟進行切片",slice:"切片",externalLink:"外部連結",makerWorld:"MakerWorld：{{designer}}",viewProject:"檢視專案",noExternalLink:"無外部連結",preview3d:"3D 預覽",download:"下載",edit:"編輯",delete:"刪除"},modal:{deleteArchive:"刪除歸檔",deleteConfirm:'確定要刪除"{{name}}"嗎？此操作無法復原。',deleteButton:"刪除",removeSource3mf:"移除源 3MF",removeSource3mfConfirm:'確定要從"{{name}}"中移除源 3MF 檔案嗎？這將刪除原始切片專案檔案。',removeButton:"移除",removeF3d:"移除 F3D",removeF3dConfirm:'確定要從"{{name}}"中移除 Fusion 360 設計檔案嗎？',removeTimelapse:"移除縮時攝影",removeTimelapseConfirm:'確定要從"{{name}}"中移除縮時攝影影片嗎？',timelapse:"{{name}} - 縮時攝影",selectTimelapse:"選擇縮時攝影",selectTimelapseDesc:"未找到自動匹配。請選擇此列印的縮時攝影：",deleteArchives:"刪除歸檔",deleteArchivesConfirm:"確定要刪除 {{count}} 個歸檔嗎？此操作無法復原。",deleteCount:"刪除 {{count}} 個"},page:{title:"歸檔",printsCount:"{{filtered}} / {{total}} 次列印",dropFilesHere:"將 .3mf 檔案拖放到此處",releaseToUpload:"放開以上傳",only3mfSupported:"僅支援 .3mf 檔案",close:"關閉",selected:"已選擇 {{count}} 個",selectAll:"全選",tags:"標籤",project:"專案",favorite:"收藏",delete:"刪除",toggledFavorites:"已切換 {{count}} 個歸檔的收藏狀態",failedUpdateFavorites:"更新收藏失敗",archivesDeleted:"已刪除 {{count}} 個歸檔",failedDeleteArchives:"刪除歸檔失敗",photoDeleted:"照片已刪除",failedDeletePhoto:"刪除照片失敗"},list:{name:"名稱",printer:"印表機",date:"日期",size:"大小",actions:"操作",hasTimelapse:"有縮時攝影"},log:{date:"日期",printName:"列印名稱",printer:"印表機",user:"使用者",status:"狀態",duration:"時長",filament:"耗材",allPrinters:"所有印表機",allUsers:"所有使用者",allStatuses:"所有狀態",cancelled:"已取消",skipped:"已跳過",dateFrom:"從",dateTo:"到",noEntries:"未找到列印日誌條目",showing:"顯示 {{count}} / {{total}} 條",rowsPerPage:"行數",page:"頁",prev:"上一頁",next:"下一頁",clearLog:"清除日誌",clearLogTitle:"清除列印日誌",clearLogConfirm:"所有列印日誌條目將被永久刪除。歸檔和佇列項目不受影響。此操作無法復原。確定要繼續嗎？",clearLogButton:"全部清除",cleared:"已清除 {{count}} 條日誌",clearFailed:"清除列印日誌失敗"}},queue:{title:"列印佇列",subtitle:"排程和管理您的列印任務",addToQueue:"新增到佇列",print:"列印",reprint:"重新列印",schedulePrint:"排程列印",editQueueItem:"編輯佇列項目",printToPrinters:"列印到 {{count}} 臺印表機",queueToPrinters:"佇列到 {{count}} 臺印表機",queueSelectedPlates:"將 {{count}} 個熱床加入佇列",selectAllPlates:"選擇全部 {{count}} 個熱床",deselectAll:"取消全選",printQueued:"已加入列印佇列",itemsQueued:"{{count}} 個任務已加入佇列",sending:"傳送中...",sendingProgress:"傳送中 {{current}}/{{total}}...",adding:"新增中...",addingProgress:"新增中 {{current}}/{{total}}...",savingProgress:"儲存中 {{current}}/{{total}}...",clearQueue:"清空佇列",clearHistory:"清除歷史",emptyQueue:"佇列為空",position:"位置",scheduledTime:"排程時間",moveUp:"上移",moveDown:"下移",startNow:"立即開始",printingInProgress:"列印進行中...",viewArchive:"檢視歸檔",viewInFileManager:"在檔案管理器中檢視",itemCount:"{{count}} 個項目",itemCount_plural:"{{count}} 個項目",dragToReorder:"拖曳以重新排序（僅限盡快）",reorderHint:'位置僅影響"儘快"項目。排程項目按設定時間執行。',sjf:{label:"SJF",tooltip:"最短任務優先 — 排程器優先處理較短的列印任務"},addedBy:"由 {{name}} 新增",nextInQueue:"佇列中的下一個",clearPlateSuccess:"列印板已清理 — 準備進行下一個列印",plateNumber:"板 {{index}}",quantity:"數量",quantityHint:"建立 {{count}} 個佇列項目",activeBatches:"活躍批次",batchProgress:"已完成 {{completed}}/{{total}}",cancelBatch:"取消剩餘",batchCancelled:"已取消剩餘批次項目",cancelBatchConfirmTitle:"取消批次",cancelBatchConfirmMessage:"取消此批次中所有剩餘的待處理項目？",batch:"批次",sections:{currentlyPrinting:"正在列印",queued:"佇列中",history:"歷史"},status:{pending:"等待中",waiting:"等待中",printing:"列印中",paused:"已暫停",completed:"已完成",failed:"失敗",skipped:"已跳過",cancelled:"已取消"},summary:{printing:"列印中",queued:"佇列中",totalTime:"總佇列時間",totalWeight:"總佇列重量",history:"歷史"},filter:{allPrinters:"所有印表機",unassigned:"未分配",allStatus:"所有狀態",allLocations:"所有位置",any:"任意"},sort:{byPosition:"按位置排序",byName:"按名稱排序",byPrinter:"按印表機排序",bySchedule:"按排程排序",byDate:"按日期排序",ascendingOldest:"升序（最舊優先）",descendingNewest:"降序（最新優先）"},badges:{staged:"已暫存",requiresPrevious:"需要前一個成功",autoPowerOff:"自動關機",gcodeInjection:"G-code"},empty:{title:"沒有排程的列印",description:'從歸檔頁面使用右鍵選單中的"排程"選項來排程列印，或拖放檔案開始。'},time:{asap:"儘快",overdue:"已逾期",now:"現在",lessThanMinute:"不到一分鐘",inMinutes:"{{count}} 分鐘後",inHours:"{{count}} 小時後"},actions:{stopPrint:"停止列印",startPrint:"開始列印",requeue:"重新佇列"},bulkEdit:{title:"編輯 {{count}} 個項目",title_plural:"編輯 {{count}} 個項目",description:"僅更改的設定將套用於所選項目。",printer:"印表機",noChange:"— 不更改 —",queueOptions:"佇列選項",staged:"暫存（手動開始）",autoPowerOff:"列印後自動關機",requirePrevious:"要求前一個成功",printOptions:"列印選項",bedLevelling:"熱床調平",flowCalibration:"流量校準",vibrationCalibration:"振動校準",layerInspection:"首層檢查",timelapse:"縮時攝影",useAms:"使用 AMS",applyChanges:"套用更改",selectAll:"全選",deselectAll:"取消全選",selected:"已選擇 {{count}} 個",editSelected:"編輯所選",cancelSelected:"取消所選"},confirm:{cancelTitle:"取消排程列印",cancelMessage:'確定要取消"{{name}}"嗎？',stopTitle:"停止列印",stopMessage:'確定要停止目前列印"{{name}}"嗎？這將取消印表機上的列印任務。',removeTitle:"從歷史中移除",removeMessage:'確定要從佇列歷史中移除"{{name}}"嗎？',clearHistoryTitle:"清除歷史",clearHistoryMessage:"確定要從歷史中移除所有 {{count}} 個項目嗎？",cancelButton:"取消列印",stopButton:"停止列印",thisPrint:"此列印",thisItem:"此項目"},toast:{cancelled:"佇列項目已取消",cancelFailed:"取消項目失敗",removed:"佇列項目已移除",removeFailed:"移除項目失敗",stopped:"列印已停止",stopFailed:"停止列印失敗",released:"列印已加入佇列",startFailed:"開始列印失敗",reorderFailed:"重新排序佇列失敗",historyCleared:"已清除 {{count}} 條歷史紀錄",clearHistoryFailed:"清除歷史失敗",updateFailed:"更新項目失敗",bulkCancelled:"已取消 {{count}} 個項目",bulkCancelFailed:"批次取消項目失敗"},timeline:{listView:"列表",timelineView:"時間線",unassigned:"未分配",noData:"當天沒有計畫的列印任務",allDoneBy:"所有列印預計在 {{time}} 前完成",staged:"暫存",filterAll:"全部顯示",filterPrinting:"列印中",filterQueued:"佇列中",time:{anyMoment:"即將完成",minutesLeft:"剩餘{{minutes}} 分鐘",hoursLeft:"剩餘{{hours}}小時",hoursMinutesLeft:"剩餘{{hours}}小時{{minutes}} 分鐘"},day:{previous:"前一天",next:"後一天",today:"今天"}},permissions:{noStopPrint:"您沒有停止列印的權限",noStartPrint:"您沒有開始列印的權限",noEdit:"您沒有編輯此佇列項目的權限",noCancel:"您沒有取消此佇列項目的權限",noRequeue:"您沒有重新佇列的權限",noRemove:"您沒有移除此佇列項目的權限",noClearHistory:"您沒有清除所有歷史的權限",noEditItems:"您沒有編輯佇列項目的權限",noCancelItems:"您沒有取消佇列項目的權限"}},backgroundDispatch:{unknownFile:"未知檔案",unknownPrinter:"未知印表機",startingPrints:"正在開始列印",progressSummary:"{{complete}}/{{total}} 完成 • 已分發：{{dispatched}} • 處理中：{{processing}}",expandDetails:"展開分發詳情",collapseDetails:"收起分發詳情",dismissToast:"關閉分發通知",cancelDispatchJob:"取消分發任務",cancel:"取消",cancelling:"取消中…",awaitingPrinter:"等待印表機…",status:{dispatched:"已分發",processing:"處理中",completed:"已完成",failed:"失敗",cancelled:"已取消"},toast:{cancellingUpload:"取消上傳中...",cancelled:"分發已取消",cancelFailed:"取消分發失敗",completeWithFailures:"後台分發完成：{{completed}} 成功，{{failed}} 失敗",completeSuccess:"後台分發完成：{{completed}} 成功",printStartedRemaining:"{{completed}} 個列印已開始，{{remaining}} 個正在傳送..."}},stats:{title:"儀表板",subtitle:"拖曳小工具以重新排列。點選眼睛圖示隱藏。",overview:"概覽",totalPrints:"總列印次數",successRate:"成功率",totalPrintTime:"總列印時間",printTime:"列印時間",totalFilament:"總耗材用量",filamentUsed:"耗材用量",filamentCost:"耗材成本",totalCost:"總成本",energyUsed:"能耗",energyCost:"能源成本",energyWarmingUpTooltip:"能耗追蹤正在收集每小時快照。當所選範圍之前至少存在一個快照時，時間段合計將變得準確。早期數值可能偏低。",averagePrintTime:"平均列印時間",printsPerDay:"每日列印次數",byPrinter:"按印表機",printsByPrinter:"各印表機列印次數",byMaterial:"按材料",byMonth:"按月份",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",allTime:"全部時間",quickStats:"快速統計",printActivity:"列印活動",filamentTypes:"耗材類型",filamentTrends:"耗材趨勢",failureAnalysis:"失敗分析",timeAccuracy:"時間準確度",successful:"成功：",failed:"失敗：",perfectEstimate:"100% = 完美估計",noTimeAccuracyData:"尚無時間準確度資料",noFilamentData:"尚無耗材資料",noPrinterData:"尚無印表機資料",noPrintData:"尚無列印資料",noPrintDataLast30Days:"最近 30 天無列印資料",failureReasons:"失敗原因",topFailureReasons:"主要失敗原因",failedPrintsCount:"{{failed}} / {{total}} 次列印失敗",lastWeekRate:"上週：{{rate}}%",resetLayout:"重設佈局",recalculateCosts:"重新計算成本",recalculateCostsHint:"使用目前耗材價格重新計算所有歸檔成本",exportStats:"匯出統計",exportAsCsv:"匯出為 CSV",exportAsExcel:"匯出為 Excel",hiddenCount:"{{count}} 個已隱藏",exportDownloaded:"匯出已下載",exportFailed:"匯出失敗",layoutReset:"佈局已重設",recalculatedCosts:"已為 {{count}} 個歸檔重新計算成本",recalculateFailed:"重新計算成本失敗",loadingStats:"載入統計資料中...",noPermissionResetLayout:"您沒有重設佈局的權限",noPermissionRecalculate:"您沒有重新計算成本的權限",noPrintDataInRange:"所選範圍內無列印資料",periodFilament:"期間耗材",periodCost:"期間成本",avgPerPrint:"每次列印平均",usageOverTime:"隨時間的使用量",filamentByWeight:"重量",printDuration:"列印時長",printerUtilization:"印表機利用率",filamentSuccess:"按材料成功率",printHabits:"列印習慣",printTimeOfDay:"列印時段",colorDistribution:"顏色分佈",noColorData:"尚無顏色資料",records:"紀錄",longestPrint:"最長列印",heaviestPrint:"最重列印",mostExpensivePrint:"最貴列印",busiestDay:"最忙碌的一天",successStreak:"連續成功",streakPrint:"連續列印",streakPrints:"{{count}} 次連續列印",printerStats:"印表機統計",hours:"小時",avgPrints:"平均列印",noArchiveData:"尚無列印資料",filamentByTime:"時間",avgWeight:"平均重量",avgTime:"平均時間",filamentByPrints:"列印次數",timeframe:{today:"今天","this-week":"本週","this-month":"本月","last-7":"最近 7 天","last-30":"最近 30 天","last-90":"最近 90 天","this-year":"今年","all-time":"全部時間",custom:"自訂範圍",from:"從",to:"到"},allUsers:"所有使用者",noUser:"無使用者（系統）",filterByUser:"按使用者篩選"},maintenance:{title:"維護",overview:"概覽",allOk:"所有維護均已完成",dueCount:"{{count}} 項到期",dueCount_plural:"{{count}} 項到期",warningCount:"{{count}} 個警告",warningCount_plural:"{{count}} 個警告",totalPrintTime:"總列印時間",nextMaintenance:"下次維護",nothingDue:"無到期項目",tasks:"任務",lastPerformed:"上次執行",interval:"間隔",hoursRemaining:"剩餘 {{hours}} 小時",hoursOverdue:"逾期 {{hours}} 小時",markDone:"標記為完成",performMaintenance:"執行維護",history:"歷史",noHistory:"無維護歷史",editPrintHours:"編輯列印時間",currentHours:"目前小時數",statusTab:"狀態",settingsTab:"設定",overdueCount:"{{count}} 個逾期",dueSoonCount:"{{count}} 個即將到期",dueSoon:"即將到期",allGood:"一切正常",overdueBy:"逾期 {{duration}}",dueIn:"{{duration}} 後到期",timeLeft:"剩餘 {{duration}}",day:"1 天",days:"{{count}} 天",week:"1 週",weeks:"{{count}} 週",month:"1 個月",months:"{{count}} 個月",year:"1 年",maintenanceTypes:"維護類型",maintenanceTypesDescription:"系統類型和您的自訂維護任務",addCustomType:"新增自訂類型",restoreDefaults:"恢復預設任務",intervalType:"間隔類型",intervalValue:"間隔 ({{type}})",icon:"圖示",documentationLink:"說明文件連結（可選）",assignToPrinters:"分配給印表機",selectAtLeastOnePrinter:"至少選擇一臺印表機",addType:"新增類型",custom:"自訂",printHours:"列印小時數",calendarDays:"日曆天數",exampleName:"例如：更換 HEPA 過濾器",viewDocumentation:"檢視說明文件",timeBasedInterval:"基於時間的間隔",intervalOverrides:"間隔覆蓋",intervalOverridesDescription:"為特定印表機自訂間隔",assignedToPrinters:"已分配給印表機：",noPrintersAssigned:"未分配印表機",addPrinterShort:"新增：",printersAssignedClick:"已分配 {{count}} 臺印表機 - 點選管理",removeFromPrinter:"從此印表機移除",types:{lubricateCarbonRods:"潤滑碳纖維杆",lubricateRails:"潤滑線性導軌",cleanNozzle:"清潔噴嘴/熱端",checkBelts:"檢查皮帶張力",cleanBuildPlate:"清潔列印板",checkExtruder:"檢查擠出機齒輪",checkCooling:"檢查冷卻風扇",generalInspection:"綜合檢查",cleanCarbonRods:"清潔碳纖維杆",lubricateSteelRods:"潤滑鋼杆",cleanSteelRods:"清潔鋼杆",cleanLinearRails:"清潔線性導軌",checkPtfeTube:"檢查 PTFE 管",replaceHepaFilter:"更換 HEPA 過濾器",replaceCarbonFilter:"更換活性炭過濾器",lubricateLeftNozzleRail:"潤滑左噴嘴導軌"},maintenanceComplete:"維護已標記為完成",typeUpdated:"維護類型已更新",typeDeleted:"維護類型已刪除",defaultsRestored:"已恢復 {{count}} 個預設任務",printHoursUpdated:"列印小時數已更新",printerAssigned:"印表機已分配",printerRemoved:"印表機已移除",deleteTypeConfirm:'刪除"{{name}}"？',deleteSystemTypeTitle:"刪除預設維護任務？",deleteSystemTypeMessage:'確定要刪除預設維護任務"{{name}}"嗎？',noPermissionUpdate:"您沒有更新維護項目的權限",noPermissionPerform:"您沒有執行維護的權限",noPermissionEditTypes:"您沒有編輯維護類型的權限",noPermissionDeleteTypes:"您沒有刪除維護類型的權限",noPermissionEditHours:"您沒有編輯列印時間的權限",noPermissionRemovePrinter:"您沒有移除印表機分配的權限",noPermissionAssignPrinter:"您沒有分配印表機的權限",noPermissionEditIntervals:"您沒有編輯間隔的權限",configureSettings:"設定維護類型和間隔"},settings:{title:"設定",general:"通用",tabs:{general:"通用",smartPlugs:"智慧插座",notifications:"通知",queue:"工作流程",filament:"耗材",network:"網路",apiKeys:"API 金鑰",virtualPrinter:"虛擬印表機",spoolbuddy:"SpoolBuddy",failureDetection:"故障檢測",users:"身份驗證",backup:"備份",emailAuth:"信箱認證",ldap:"LDAP",twoFa:"雙因素認證",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy 裝置",infoBody:"SpoolBuddy kiosk 透過心跳自動註冊。如果裝置不再使用，或守護程式當機遺留了過時的重複項，可在此取消註冊。",duplicatesTitle:"已註冊 {{count}} 台裝置",duplicatesBody:"kiosk 介面只使用最先註冊的裝置。如果其中有因當機遺留的過時重複項，請取消註冊它——線上裝置會在下次心跳時重新註冊自己。",empty:"尚未註冊任何 SpoolBuddy 裝置。",online:"線上",offline:"離線",unregister:"取消註冊",unregisterSuccess:"裝置已取消註冊",unregisterError:"取消註冊裝置失敗",confirmTitle:"取消註冊 SpoolBuddy 裝置？",confirmBody:'將從資料庫中移除 "{{hostname}}" ({{deviceId}})。如果裝置線上，會在下次心跳時重新註冊自己。',ipAddress:"IP 位址",firmware:"韌體",lastSeen:"上次線上",daemonUptime:"守護程式執行時間",systemUptime:"系統執行時間",never:"從未",nfc:"NFC",scale:"磅秤",cpuTemp:"CPU 溫度",memory:"記憶體",disk:"磁碟",update:"更新",updateConfirmTitle:"更新 SpoolBuddy 守護程式？",updateConfirmBody:'對 "{{hostname}}" 觸發軟體更新？更新完成後守護程式將重新啟動。',restartBrowser:"重新啟動瀏覽器",restartBrowserConfirmTitle:"重新啟動 kiosk 瀏覽器？",restartBrowserConfirmBody:'在 "{{hostname}}" 上重新啟動 kiosk 瀏覽器？顯示將短暫黑屏。',restartDaemon:"重新啟動守護程式",restartDaemonConfirmTitle:"重新啟動 SpoolBuddy 守護程式？",restartDaemonConfirmBody:'在 "{{hostname}}" 上重新啟動 SpoolBuddy 守護程式？裝置將離線幾秒鐘。',reboot:"重新開機",rebootConfirmTitle:"重新開機？",rebootConfirmBody:'重新開機 "{{hostname}}"？裝置將離線約一分鐘。',shutdown:"關機",shutdownConfirmTitle:"關閉裝置？",shutdownConfirmBody:'關閉 "{{hostname}}"？您需要實體存取才能重新開機。',commandConfirm:"確認",commandQueued:"命令已加入佇列",commandError:"傳送命令失敗"},ldap:{title:"LDAP 認證",enabledDesc:"LDAP 認證已啟用",disabledDesc:"LDAP 認證已停用",disabledHint:"在下方設定並儲存 LDAP 設定，然後啟用。",enabled:"LDAP 認證已啟用",disabled:"LDAP 認證已停用",feature1:"使用者可以使用 LDAP 憑據登入",feature2:"本機管理員帳戶作為後備保留",feature3:"登入時 LDAP 群組對應到 BamBuddy 群組",serverConfig:"LDAP 伺服器設定",serverUrl:"伺服器 URL",serverUrlHint:"使用 ldap:// 進行標準連線或 ldaps:// 進行 SSL 連線",security:"安全",securityHint:"StartTLS 將普通連線升級為 TLS。LDAPS 從一開始就使用 TLS。",bindDn:"繫結 DN（服務帳戶）",bindPassword:"繫結密碼",searchBase:"搜尋基礎 DN",userFilter:"使用者搜尋過濾器",userFilterHint:"{username} 替換為登入使用者名稱。OpenLDAP 使用 (uid={username})。",autoProvision:"自動建立使用者",autoProvisionHint:"首次 LDAP 登入時自動建立 BamBuddy 帳戶",defaultGroup:"預設群組",defaultGroupNone:"— 無（無復原）—",defaultGroupHint:"當 LDAP 使用者透過身份驗證但不在任何已對應的 LDAP 群組中時分配的備援群組。留空以使未對應的使用者沒有權限。",groupMapping:"群組對應（JSON）",groupMappingHint:"將 LDAP 群組 DN 對應到 BamBuddy 群組。可用群組：",testConnection:"測試連線",settingsSaved:"LDAP 設定已儲存",errors:{serverRequired:"LDAP 伺服器 URL 為必填項",searchBaseRequired:"搜尋基礎 DN 為必填項",enableAuthFirst:"請先啟用認證",configureLdapFirst:"請先儲存 LDAP 設定"}},email:{smtpSettings:"SMTP 設定",smtpHost:"SMTP 伺服器",smtpPort:"SMTP 連接埠",security:"安全",authentication:"認證",username:"使用者名稱",password:"密碼",fromEmail:"寄件信箱",fromName:"寄件人名稱",testConnection:"測試 SMTP 連線",testRecipient:"測試收件信箱",sendTest:"傳送測試郵件",sending:"傳送中...",save:"儲存設定",saving:"儲存中...",advancedAuth:"進階認證",advancedAuthEnabled:"進階認證已啟用",advancedAuthEnabledDesc:"基於信箱的使用者管理功能已啟用。新使用者將透過郵件收到自動產生的密碼，使用者可以透過忘記密碼功能重設密碼。",advancedAuthDisabled:"進階認證已停用",advancedAuthDisabledDesc:"啟用進階認證以啟用基於信箱的使用者管理功能。",enable:"啟用",disable:"停用",feature1:"密碼自動產生並透過郵件傳送給新使用者",feature2:"使用者可以使用使用者名稱或信箱登入",feature3:"忘記密碼功能可用",feature4:"管理員可以透過郵件重設使用者密碼",errors:{requiredFields:"請填寫所有必填欄位",usernameRequired:"啟用認證時需要使用者名稱",enterTestEmail:"請輸入測試信箱地址",smtpServerAndEmail:"測試前請填寫 SMTP 伺服器和寄件信箱",usernamePasswordRequired:"啟用認證時需要使用者名稱和密碼",configureSmtpFirst:"請先設定並測試 SMTP 設定",enableAuthFirst:"請先啟用身份驗證才能使用基於電子郵件的功能。"},success:{settingsSaved:"SMTP 設定儲存成功"},securityOptions:{starttls:"STARTTLS（連接埠 587）",ssl:"SSL/TLS（連接埠 465）",none:"無（連接埠 25）"},authOptions:{enabled:"已啟用",disabled:"已停用"}},appearance:"外觀",notifications:"通知",smartPlugs:"智慧插座",spoolman:"Spoolman",updates:"更新",language:"語言",languageDescription:"選擇您的首選語言",theme:"主題",themeLight:"淺色",themeDark:"深色",themeSystem:"跟隨系統",defaultView:"預設檢視",defaultViewDescription:"開啟應用程式時顯示的頁面",checkForUpdates:"檢查更新",autoUpdate:"自動更新",currentVersion:"目前版本",latestVersion:"最新版本",upToDate:"已是最新版本",updateAvailable:"有可用更新",notificationLanguage:"通知語言",notificationLanguageDescription:"推送通知的語言",bedCooledThreshold:"熱床冷卻閾值",bedCooledThresholdDescription:"列印後熱床被視為已冷卻的溫度",userNotificationsEnabled:"使用者通知",userNotificationsEnabledDescription:"啟用使用者通知選單和列印任務事件的郵件通知。需要進階身份驗證。",userNotificationsDisabledHint:"請啟用進階身份驗證以使用使用者通知。",notificationProviders:"通知提供者",addProvider:"新增提供者",editProvider:"編輯提供者",providerType:"提供者類型",testNotification:"測試通知",testSuccess:"測試通知傳送成功",testFailed:"傳送測試通知失敗",quietHours:"免打擾時間",quietHoursDescription:"在此時間段內不傳送通知",quietHoursStart:"開始",quietHoursEnd:"結束",events:{title:"通知事件",printStart:"列印開始",printComplete:"列印完成",printFailed:"列印失敗",printStopped:"列印停止",printProgress:"進度里程碑",printProgressDescription:"在 25%、50%、75% 時通知",printerOffline:"印表機離線",printerError:"印表機錯誤",filamentLow:"耗材不足",maintenanceDue:"維護到期",maintenanceDueDescription:"需要維護時通知"},smartPlug:{title:"智慧插座",add:"新增智慧插座",edit:"編輯智慧插座",name:"名稱",ipAddress:"IP 位址",linkedPrinter:"連結印表機",autoOn:"自動開啟",autoOnDescription:"列印開始時開啟",autoOff:"自動關閉",autoOffDescription:"列印完成後關閉",offDelay:"關閉延遲",offDelayMinutes:"列印後分鐘數",offDelayTemp:"當噴嘴溫度低於",currentState:"目前狀態",turnOn:"開啟",turnOff:"關閉"},filamentTracking:"耗材追蹤",filamentTrackingDesc:"選擇如何追蹤您的耗材。您可以使用內建庫存或連線外部 Spoolman 伺服器。",filamentChecks:"耗材檢查",disableFilamentWarnings:"停用耗材警告",disableFilamentWarningsDesc:"在列印或加入佇列時不顯示耗材不足警告",preferLowestFilament:"優先使用剩餘最少的耗材",preferLowestFilamentDesc:"當多個料盤匹配時，使用剩餘耗材最少的那個",trackingModeBuiltIn:"內建庫存",trackingModeBuiltInDesc:"包含 RFID 自動匹配和用量追蹤",trackingModeSpoolmanDesc:"外部耗材管理伺服器",builtInFeatureRfid:"自動檢測 AMS 中的拓竹 RFID 耗材",builtInFeatureUsage:"追蹤每次列印的耗材消耗",builtInFeatureCatalog:"管理耗材、顏色和 K 值設定檔案",builtInFeatureThirdParty:"第三方耗材可分配到庫存耗材",amsSyncButton:"從 AMS 同步重量",amsSyncTitle:"從 AMS 同步耗材重量",amsSyncMessage:"這將使用已連線印表機的目前 AMS 剩餘百分比值覆蓋所有庫存耗材重量。用於從損壞的重量資料中恢復。印表機必須線上。",amsSyncing:"同步中...",amsSyncSuccess:"已同步 {{synced}} 個耗材，跳過 {{skipped}} 個",amsSyncError:"從 AMS 同步重量失敗",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman 伺服器的 URL（例如 http://localhost:7912）",spoolmanConnected:"已連線",spoolmanDisconnected:"未連線",status:"狀態",connect:"連線",disconnect:"斷開",howSyncWorks:"同步工作原理",syncInfoRfidOnly:"僅同步帶有 RFID 的官方拓竹耗材",syncInfoAutoCreate:"首次同步時自動在 Spoolman 中建立新耗材",syncInfoThirdPartySkipped:"非拓竹耗材（第三方、重新填充的）將被跳過",linkingExistingSpools:"連結現有耗材",linkingExistingSpoolsDesc:'要將現有的 Spoolman 耗材連結到您的 AMS，請將滑鼠懸停在 AMS 槽位上並點選"連結到 Spoolman"。',syncMode:"同步模式",syncModeAuto:"自動",syncModeManual:"僅手動",syncModeAutoDesc:"偵測到更改時自動同步 AMS 資料",syncModeManualDesc:"僅在手動觸發時同步",syncAmsData:"同步 AMS 資料",syncAmsDataDesc:"手動將印表機 AMS 資料同步到 Spoolman",allPrinters:"所有印表機",noDefaultPrinter:"無預設（每次詢問）",sidebarOrder:"側邊欄順序",saveThumbnails:"儲存縮圖",captureFinishPhoto:"拍攝完成照片",noPrintersConfigured:"未設定印表機",archiveMode:{always:"始終建立歸檔條目",never:"從不建立歸檔條目",ask:"每次詢問"},checkForUpdatesLabel:"檢查更新",checkPrinterFirmware:"檢查印表機韌體",includeBetaUpdates:"包含測試版本",includeBetaUpdatesDesc:"檢查更新時通知測試版和預發布版本",enableRetry:"啟用重試",homeAssistantDescription:"透過 Home Assistant 控制智慧插座",environmentManagedLabel:"（環境變數管理）",autoEnabledViaEnv:"透過環境變數自動啟用",urlFromEnvReadOnly:"值由 HA_URL 環境變數設定（只讀）",tokenFromEnvReadOnly:"值由 HA_TOKEN 環境變數設定（只讀）",mqttConnectedTo:"已連線到",prometheusDescription:"以 Prometheus 格式暴露印表機資料",noSmartPlugsTitle:"未設定智慧插座",noSmartPlugsDescription:"新增基於 Tasmota 的智慧插座以追蹤能耗並自動化電源控制。",noProvidersTitle:"未設定提供者",noProvidersDescription:"新增提供者以接收警報。",noTemplatesAvailable:"無可用範本。重新啟動後端以載入預設範本。",apiPermissionView:"檢視印表機狀態和佇列",apiPermissionEdit:"新增和移除列印佇列中的項目",apiKeysEmptyTitle:"無 API 金鑰",apiKeysEmptyDescription:"建立 API 金鑰以與外部服務整合。",noUsersFound:"未找到使用者",noGroupsFound:"未找到群組",noGroupsAvailable:"無可用群組",passwordsDoNotMatch:"密碼不符",systemGroupWarning:"系統群組名稱不可更改",authDisabledTitle:"身份驗證已停用",authDisabledFeature1:"需要登入才能存取系統",authDisabledFeature2:"建立多個使用者並基於群組的權限管理",authDisabledFeature3:"使用 50+ 個細粒度權限控制存取",userHasCreated:"此使用者已建立：",userItemsQuestion:"您想如何處理這些項目？",deleteUserConfirm:"確定要刪除此使用者嗎？",actionCannotBeUndone:"此操作無法復原。",addFirstSmartPlug:"新增您的第一個智慧插座",providers:"提供者",log:"日誌",testAll:"全部測試",testResults:"測試結果",testPassedCount:"{{count}} 個透過",testFailedCount:"{{count}} 個失敗",messageTemplates:"訊息範本",messageTemplatesDescription:"自訂每個事件的通知訊息。",apiKeys:"API 金鑰",apiKeysDescription:"建立 API 金鑰用於外部整合和 Webhook。",createKey:"建立金鑰",apiKeyCreated:"API 金鑰建立成功",apiKeyCopyWarning:"請立即複製此金鑰 - 它不會再次顯示！",useInApiBrowser:"在 API 瀏覽器中使用",createNewApiKey:"建立新 API 金鑰",keyName:"金鑰名稱",keyNamePlaceholder:"例如：Home Assistant、OctoPrint",readStatus:"讀取狀態",readStatusDescription:"檢視印表機狀態和佇列",manageQueue:"管理佇列",manageQueueDescription:"新增和移除列印佇列中的項目",controlPrinter:"控制印表機",controlPrinterDescription:"暫停、繼續和停止列印",unnamedKey:"未命名金鑰",lastUsed:"上次使用",read:"讀取",control:"控制",createFirstKey:"建立您的第一個金鑰",webhookEndpoints:"Webhook 端點",webhookApiKeyHint:"在 X-API-Key 請求頭中使用您的 API 金鑰。",webhook:{getAllStatus:"獲取所有印表機狀態",getSpecificStatus:"獲取特定印表機狀態",addToQueue:"新增到列印佇列",pausePrint:"暫停列印",resumePrint:"繼續列印",stopPrint:"停止列印"},apiBrowser:"API 瀏覽器",apiBrowserDescription:"瀏覽和測試所有可用的 API 端點。",apiKeyForTesting:"測試用 API 金鑰",apiKeyPlaceholder:"在此貼上您的 API 金鑰以測試需要認證的端點...",apiKeyHint:"此金鑰將作為 X-API-Key 請求頭隨請求傳送。",deleteApiKeyTitle:"刪除 API 金鑰",deleteApiKeyMessage:"確定要刪除此 API 金鑰嗎？使用此金鑰的所有整合將停止工作。",deleteKey:"刪除金鑰",amsDisplayThresholds:"AMS 顯示閾值",amsThresholdsDescription:"設定 AMS 濕度和溫度指示器的顏色閾值。",humidity:"濕度",goodGreen:"良好（綠色）",fairOrange:"一般（橙色）",aboveFairBad:"超過一般閾值顯示為紅色（差）",fairAlsoDryingThreshold:"此閾值也用於觸發自動乾燥",temperature:"溫度",goodBlue:"良好（藍色）",aboveFairHot:"超過一般閾值顯示為紅色（熱）",historyRetention:"歷史保留",keepSensorHistory:"保留感測器歷史",historyRetentionDescription:"較舊的濕度和溫度資料將被自動刪除",defaultPrintOptions:"預設列印選項",defaultPrintOptionsDescription:"設定新列印的預設選項值。可在列印對話方塊中逐次覆蓋。",defaultBedLevelling:"熱床調平",defaultBedLevellingDesc:"列印前自動調平熱床",defaultFlowCali:"流量校準",defaultFlowCaliDesc:"校準擠出流量",defaultVibrationCali:"振動校準",defaultVibrationCaliDesc:"減少振紋偽影",defaultLayerInspect:"首層檢測",defaultLayerInspectDesc:"AI首層檢測",defaultTimelapse:"縮時攝影",defaultTimelapseDesc:"錄製縮時攝影影片",staggeredStart:"錯開啟動",staggeredStartDescription:"多台印表機批次啟動時的預設群組大小與間隔。可在列印對話框中逐批覆寫。",plateClear:"熱床清空確認",requirePlateClear:"需要熱床清空確認",requirePlateClearDescription:"啟用後，排程器會在已完成列印的印表機上啟動佇列列印之前，等待每臺印表機的熱床清空確認。停用後，也會隱藏印表機卡片上的列印板狀態標記和「將列印板標記為已清理」按鈕。",gcodeInjection:"G-code注入",gcodeInjectionDescription:'為Farmloop、SwapMod、AutoClear和Printflow 3D等自動列印系統設定自訂G-code，在列印開始和/或結束時注入。程式碼片段按印表機型號設定，在佇列項目上啟用"注入G-code"時套用。',gcodeInjectionNoPrinters:"未找到印表機。新增印表機以設定G-code程式碼片段。",gcodeStartLabel:"開始G-code",gcodeEndLabel:"結束G-code",gcodeStartPlaceholder:"在列印開始前插入的G-code...",gcodeEndPlaceholder:"在列印結束後追加的G-code...",staggerGroupSize:"群組大小",staggerGroupSizeHelp:"每個群組要同時啟動的印表機數量",staggerInterval:"間隔（分鐘）",staggerIntervalHelp:"每個群組啟動之間的延遲",queueDrying:"自動乾燥",queueDryingDescription:"在佇列列印之間，印表機空閒時自動乾燥AMS耗材。使用上方的濕度閾值觸發乾燥。",queueDryingEnabled:"啟用自動乾燥",queueDryingEnabledDescription:"當印表機空閒且濕度超過閾值時，自動啟動AMS乾燥",queueDryingBlock:"等待乾燥完成",queueDryingBlockDescription:"阻止列印佇列直到乾燥完成。關閉時，列印優先於乾燥。",ambientDryingEnabled:"環境乾燥",ambientDryingEnabledDescription:"當空閒印表機的濕度超過閾值時自動乾燥耗材，無需佇列列印。",dryingPresets:"乾燥預設",dryingPresetsDescription:"每種耗材類型的溫度和時長。AMS 2 Pro使用較低溫度，AMS-HT支援較高溫度。",dryingFilament:"耗材",printModal:"列印對話方塊",expandCustomMapping:"預設展開自訂對應",expandCustomMappingDescription:"列印到多臺印表機時，預設展開顯示每臺印表機的 AMS 對應",authentication:"身份驗證",authEnabledDescription:"您的實例已透過使用者身份驗證保護",authDisabledDescription:"啟用以要求登入並管理使用者存取",authDisabledMessage:"啟用身份驗證以建立使用者帳戶、管理權限並保護您的 Bambuddy 實例。",enableAuthentication:"啟用身份驗證",currentUser:"目前使用者",changePassword:"修改密碼",admin:"管理員",users:"使用者",addUser:"新增使用者",groups:"群組",addGroup:"新增群組",system:"系統",noDescription:"無描述",userCount:"{{count}} 個使用者",permissionCount:"{{count}} 個權限",createUser:"建立使用者",username:"使用者名稱",enterUsername:"輸入使用者名稱",password:"密碼",enterPassword:"輸入密碼（至少 6 個字元）",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"確認密碼",viewReleaseOnGitHub:"在 GitHub 上檢視發布",turnAllPlugsOn:"開啟所有插座",turnAllPlugsOff:"關閉所有插座",clearNotificationLogs:"清除通知日誌",clearLogsMessage:"這將永久刪除所有 30 天前的通知日誌。此操作無法復原。",clearLogs:"清除日誌",resetUiPreferences:"重設 UI 偏好",resetUiPreferencesMessage:"這將重設所有 UI 偏好為預設值：側邊欄順序、主題、儀表板佈局、檢視模式和排序偏好。您的印表機、歸檔和伺服器設定不會受到影響。清除後頁面將重新載入。",resetPreferences:"重設偏好",deleteGroupTitle:"刪除群組",deleteGroupMessage:"確定要刪除此群組嗎？此群組中的使用者將失去這些權限。",deleteGroup:"刪除群組",disableAuthenticationTitle:"停用身份驗證",disableAuthenticationMessage:"確定要停用身份驗證嗎？這將使您的 Bambuddy 實例無需登入即可存取。所有使用者將保留在資料庫中但身份驗證將被停用。",disableAuthentication:"停用身份驗證",configureBambuddy:"設定 Bambuddy",systemDefault:"系統預設",archiveSettings:"歸檔設定",newWindow:"新視窗",embeddedOverlay:"嵌入式疊加層",preferredSlicer:"首選切片軟體",preferredSlicerDescription:"選擇要用於開啟檔案的切片軟體",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"外部攝影機",costTracking:"成本追蹤",printsOnly:"僅列印",totalConsumption:"總消耗",dataManagement:"資料管理",storageUsage:"儲存使用情況",storageUsageDescription:"按類別的資料使用情況明細",storageUsageTotal:"總計",storageUsageErrors:"錯誤",storageUsageOtherBreakdown:"其他（包括靜態資源、腳本和設定檔案）",storageUsageSystem:"系統",storageUsageData:"資料",storageUsageUnavailable:"儲存使用資訊不可用",clearNotificationLogsDescription:"刪除 30 天前的通知日誌",resetUiPreferencesDescription:"重設側邊欄順序、主題、檢視模式和佈局偏好。印表機、歸檔和設定不受影響。",enableHomeAssistant:"啟用 Home Assistant",enableMqtt:"啟用 MQTT",useTls:"使用 TLS",enableMetricsEndpoint:"啟用指標端點",availableMetrics:"可用指標",editUser:"編輯使用者",deleteUserTitle:"刪除使用者",groupName:"群組名稱",leaveEmptyForAnonymous:"留空為匿名",leaveEmptyForNoAuth:"留空為無認證",enterNewPassword:"輸入新密碼",confirmNewPassword:"確認新密碼",enterGroupName:"輸入群組名稱",enterDescriptionOptional:"輸入描述（可選）",enterCurrentPassword:"輸入目前密碼",enterNewPasswordMin6:"輸入新密碼（至少 6 個字元）",toast:{keyCopied:"金鑰已複製到剪貼簿",copyFailed:"複製金鑰失敗",keyAddedToBrowser:"金鑰已新增到 API 瀏覽器",clearLogsFailed:"清除日誌失敗",uiPreferencesReset:"UI 偏好已重設。重新整理中...",authDisabled:"身份驗證已成功停用",authDisableFailed:"停用身份驗證失敗",apiKeyCreated:"API 金鑰已建立",apiKeyDeleted:"API 金鑰已刪除",userCreated:"使用者建立成功",userUpdated:"使用者更新成功",userDeleted:"使用者刪除成功",groupCreated:"群組建立成功",groupUpdated:"群組更新成功",groupDeleted:"群組刪除成功",fillRequiredFields:"請填寫所有必填欄位",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元",enterGroupName:"請輸入群組名稱",settingsSaved:"設定已儲存",noPermissionUpdate:"您沒有權限變更設定",cameraSettingsSaved:"攝影機設定已儲存",enterCameraUrl:"請輸入攝影機 URL",passwordChanged:"密碼修改成功",connectionFailed:"連線失敗",testFailed:"測試失敗",cameraConnected:"攝影機已連線{{resolution}}"},testConnection:"測試連線",catalog:{spoolCatalog:"耗材目錄",spoolCatalogDescription:"按品牌/類型的空耗材重量。用於新增耗材時的自動重量查詢。",searchCatalog:"搜尋目錄...",addNewEntry:"新增新條目",namePlaceholder:"名稱（例如：Bambu Lab - 塑膠）",weight:"重量",type:"類型",default:"預設",custom:"自訂",noMatch:"沒有條目匹配您的搜尋",empty:"目錄中沒有條目",deleteEntry:"刪除條目",deleteConfirm:'確定要刪除"{{name}}"嗎？',resetCatalog:"重設目錄",resetConfirm:"重設目錄為預設值？這將移除所有自訂條目。",loadFailed:"載入耗材目錄失敗",nameWeightRequired:"名稱和重量為必填項",entryAdded:"條目已新增",addFailed:"新增條目失敗",entryUpdated:"條目已更新",updateFailed:"更新條目失敗",entryDeleted:"條目已刪除",deleteFailed:"刪除條目失敗",resetSuccess:"目錄已重設為預設值",resetFailed:"重設目錄失敗",exported:"已匯出 {{count}} 條",imported:"已匯入 {{added}} 條（跳過 {{skipped}} 條）",importFailed:"匯入失敗：無效的 JSON 格式",exportTooltip:"匯出目錄為 JSON",importTooltip:"從 JSON 匯入目錄",resetTooltip:"重設為預設值",selectedCount:"已選擇 {{count}} 項",deleteSelected:"刪除所選",bulkDeleteConfirm:"確定要刪除 {{count}} 個條目嗎？",bulkDeleted:"已刪除 {{count}} 個條目",bulkDeleteFailed:"刪除條目失敗"},colorCatalog:{title:"顏色目錄",description:"按製造商/材料的耗材顏色。用於新增耗材時的自動顏色查詢。",searchColors:"搜尋顏色...",allManufacturers:"所有製造商",addNewColor:"新增新顏色",manufacturer:"製造商",colorName:"顏色名稱",hex:"十六進位",materialOptional:"材料（可選）",showing:"顯示 {{filtered}} / {{total}} 種顏色",noMatch:"沒有顏色匹配您的搜尋",empty:"目錄中沒有顏色",deleteColor:"刪除顏色",deleteConfirm:'確定要刪除"{{name}}"嗎？',resetCatalog:"重設顏色目錄",resetConfirm:"重設目錄為預設值？這將移除所有自訂顏色。",sync:"同步",starting:"啟動中...",syncTooltip:"從 FilamentColors.xyz 同步（2000+ 種顏色，可能需要一分鐘）",loadFailed:"載入顏色目錄失敗",fieldsRequired:"製造商、顏色名稱和十六進位顏色為必填項",colorAdded:"顏色已新增",addFailed:"新增顏色失敗",colorUpdated:"顏色已更新",updateFailed:"更新顏色失敗",colorDeleted:"顏色已刪除",deleteFailed:"刪除顏色失敗",resetSuccess:"顏色目錄已重設為預設值",resetFailed:"重設目錄失敗",syncUpToDate:"已是最新（檢查了 {{count}} 種顏色）",syncComplete:"新增了 {{added}} 種新顏色（{{skipped}} 種已存在）",syncError:"同步錯誤",syncFailed:"從 FilamentColors.xyz 同步失敗",exported:"已匯出 {{count}} 種顏色",imported:"已匯入 {{added}} 種顏色（跳過 {{skipped}} 種）",importFailed:"匯入失敗：無效的 JSON 格式",selectedCount:"已選擇 {{count}} 項",deleteSelected:"刪除所選",bulkDeleteConfirm:"確定要刪除 {{count}} 種顏色嗎？",bulkDeleted:"已刪除 {{count}} 種顏色",bulkDeleteFailed:"刪除顏色失敗"},dateFormat:"日期格式",dateFormatUs:"美式 (MM/DD/YYYY)",dateFormatEu:"歐式 (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"時間格式",timeFormat12:"12小時制 (3:30 PM)",timeFormat24:"24小時制 (15:30)",defaultPrinter:"預設印表機",defaultPrinterDescription:"為上傳、重印和其他操作預選此印表機。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"拖曳側邊欄項目以重新排序。在此處重設為預設順序。",setDefault:"設為預設",sidebarOrderSetDefaultHint:"設為預設將目前選單順序套用於尚未自訂的使用者。",sidebarDefaultSet:"已設定預設選單順序。",sidebarDefaultCleared:"已清除預設選單順序。",sidebarDefaultFailed:"設定預設選單順序失敗。",reset:"重設",darkMode:"深色模式",lightMode:"淺色模式",active:"(目前)",background:"背景",accent:"強調色",style:"樣式",bgNeutral:"中性",bgWarm:"暖色",bgCool:"冷色",bgOled:"OLED 純黑",bgSlate:"石板藍",bgForest:"森林綠",accentGreen:"綠色",accentTeal:"青色",accentBlue:"藍色",accentOrange:"橙色",accentPurple:"紫色",accentRed:"紅色",styleClassic:"經典",styleGlow:"發光",styleVibrant:"鮮豔",themeToggleHint:"使用側邊欄中的太陽/月亮圖示在深色和淺色模式之間切換。",autoArchivePrints:"自動歸檔列印",autoArchiveDescription:"列印完成時自動儲存3MF檔案",saveThumbnailsDescription:"從3MF檔案中提取並儲存預覽影像",captureFinishPhotoDescription:"列印完成時從印表機攝影機拍照",ffmpegNotInstalled:"未安裝ffmpeg",ffmpegRequired:"攝影機捕獲需要ffmpeg。透過 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安裝。",camera:"攝影機",cameraViewMode:"攝影機檢視模式",cameraOverlayDescription:"攝影機在主螢幕上以可調大小的覆蓋層開啟",cameraWindowDescription:"攝影機在單獨的瀏覽器視窗中開啟",externalCamerasDescription:"設定外部攝影機以替換內建印表機攝影機。支援MJPEG流、RTSP、HTTP快照和USB攝影機（V4L2）。啟用後，外部攝影機將用於即時檢視和完成照片。",cameraPlaceholderUsb:"裝置路徑 (/dev/video0)",cameraPlaceholderUrl:"攝影機URL (rtsp://... 或 http://...)",cameraTypeMjpeg:"MJPEG 流",cameraTypeRtsp:"RTSP 流",cameraTypeSnapshot:"HTTP 快照",cameraTypeUsb:"USB 攝影機 (V4L2)",cameraRotation:"旋轉",test:"測試",connected:"已連線",disconnected:"未連線",currency:"貨幣",defaultFilamentCost:"預設耗材成本（每公斤）",electricityCost:"每千瓦時電費",energyDisplayMode:"能源顯示模式",energyModePrintDescription:"儀表板顯示列印期間使用的能源總和",energyModeTotalDescription:"儀表板顯示智慧插座的累計能源",fileManager:"檔案管理器",createArchiveEntry:"列印時建立歸檔條目",createArchiveEntryDescription:"從檔案管理器列印時，可選擇建立歸檔條目",lowDiskSpaceWarning:"磁碟空間不足警告",lowDiskSpaceDescription:"當可用磁碟空間低於此閾值時顯示警告",printerFirmware:"印表機韌體",checkFirmwareDescription:"檢查Bambu Lab的印表機韌體更新",bambuddySoftware:"Bambuddy 軟體",autoCheckDescription:"啟動時自動檢查新版本",checkNow:"立即檢查",updateAvailableVersion:"可用更新：v{{version}}",releaseNotes:"發布說明",updateViaDocker:"透過 Docker Compose 更新：",installUpdate:"安裝更新",latestVersionRunning:"您正在執行最新版本",failedToCheckUpdates:"檢查更新失敗：{{error}}",backupRestore:"備份與恢復",backupRestoreDescription:"匯出/匯入設定並設定GitHub 備份",goToBackup:"前往備份",externalUrl:"外部URL",externalUrlDescription:"Bambuddy可存取的外部URL。用於通知影像和外部整合。",bambuddyUrl:"Bambuddy URL",externalUrlHint:"包含協定和連接埠（例如：http://192.168.1.100:8000）",ftpRetry:"FTP重試",ftpRetryDescription:"當印表機Wi-Fi 不穩定時重試FTP操作。適用於3MF下載、列印上傳、縮時攝影下載和韌體更新。",autoRetryDescription:"自動重試失敗的FTP操作",retryAttempts:"重試次數",retryDelay:"重試延遲",connectionTimeout:"連線超時",time_one:"{{count}} 次",time_other:"{{count}} 次",second_one:"{{count}} 秒",second_other:"{{count}} 秒",nSeconds:"{{count}} 秒",increaseForWeakWifi:"對Wi-Fi 訊號弱的印表機增加此值",homeAssistant:"Home Assistant",homeAssistantFullDescription:"連線到Home Assistant，透過HA REST API控制智慧插座。支援switch、light、input_boolean和script實體。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"長期存取權杖",haTokenHint:"在HA中建立權杖：個人資料 → 長期存取權杖 → 建立權杖",connectionSuccessful:"連線成功",connectionFailed:"連線失敗",haConnectionSuccess:"已成功連線到Home Assistant。",haConnectionFailed:"連線Home Assistant失敗。",mqttPublishing:"MQTT發布",mqttDescription:"將BamBuddy事件發布到外部MQTT代理，用於與Node-RED、Home Assistant和其他自動化系統整合。",mqttEnableDescription:"向外部MQTT代理發布事件",brokerHostname:"代理主機名稱",port:"連接埠",usernameOptional:"使用者名稱（可選）",passwordOptional:"密碼（可選）",topicPrefix:"主題前綴",topicPrefixHint:"主題格式：{{prefix}}/printers/<serial>/status 等",prometheusMetrics:"Prometheus 指標",prometheusEndpointDescription:"在 <code>/api/v1/metrics</code> 公開印表機指標，用於Prometheus/Grafana監控。",bearerTokenOptional:"Bearer權杖（可選）",bearerTokenHint:"設定後，請求必須包含 <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"連線狀態",metricsPrinterState:"印表機狀態（空閒/列印中等）",metricsPrintProgress:"列印進度 0-100%",metricsBedTemp:"熱床溫度",metricsNozzleTemp:"噴嘴溫度",metricsPrintsTotal:"按結果分類的總列印數",metricsMore:"...以及更多（層數、風扇、佇列、耗材用量）",smartPlugsDescription:"連線智慧插座（Tasmota或Home Assistant）以自動化電源控制並追蹤印表機的能源使用情況。",allOn:"全部開啟",allOff:"全部關閉",addSmartPlug:"新增智慧插座",energySummary:"能源概要",currentPower:"目前功率",plugsOnline:"{{reachable}}/{{total}} 個插座線上",today:"今天",yesterday:"昨天",total:"總計",enablePlugsForSummary:"啟用插座以檢視能源概要",addNotificationProvider:"新增",systemBadge:"(系統)",creating:"建立中...",changing:"修改中...",deleteUserAndItems:"刪除使用者及其所有項目",deleteUserKeepItems:"刪除使用者，保留項目（將變為無主項目）",ok:"確定",twoFa:{totpTitle:"身份驗證器 App (TOTP)",totpDesc:"使用 Google Authenticator、Aegis 或 Authy 等 App。",emailOtpTitle:"郵件 OTP",emailOtpDesc:"登入時向 {{email}} 傳送一次性驗證碼。",emailOtpNoEmail:"請先為帳戶新增信箱地址以啟用此方式。",addEmailFirst:"您的帳戶沒有信箱地址，請聯絡管理員新增。",setupTotp:"設定身份驗證器 App",setupAuthApp:"設定身份驗證器 App",setupInstructions:"使用身份驗證器 App 掃描QR Code，然後輸入驗證碼確認。",manualEntry:"無法掃描？請手動輸入此金鑰：",scannedContinue:"已掃描 — 繼續",enterCodeToConfirm:"請輸入身份驗證器 App 中的6位驗證碼以確認設定。",activate:"啟用",disableTotp:"停用身份驗證器",disableConfirmHint:"請輸入有效的 TOTP 碼或備用碼來停用身份驗證器。",totpDisabled:"身份驗證器 App 已停用。",emailOtpEnabled:"郵件 OTP 已啟用。",emailOtpDisabled:"郵件 OTP 已停用。",smtpRequired:"請先設定並測試SMTP設定。",invalidCode:"無效驗證碼，請重試。",enableEmailOtp:"啟用郵件 OTP",disableEmailOtp:"停用郵件 OTP",emailSetupEnterCode:"驗證碼已傳送至您的信箱地址。請在下方輸入以確認您擁有此信箱。",verifyAndEnable:"驗證並啟用",emailDisablePasswordHint:"請輸入您的帳戶密碼以確認停用郵件 OTP。",passwordPlaceholder:"輸入您的密碼",backupCodesTitle:"儲存備用碼",backupCodesWarning:"請將這些碼儲存在安全的地方。每個碼只能使用一次，且不會再次顯示。",backupCodesRemaining:"剩餘 {{count}} 個備用碼",savedCodes:"已儲存",regenBackup:"重新產生備用碼",regenBackupHint:"輸入目前 TOTP 碼以產生 10 個新備用碼，所有現有備用碼將失效。",newBackupCodes:"新備用碼",linkedAccounts:"已連結的 SSO 帳戶",linkedAccountsDesc:"以下外部身份提供者已與您的帳戶連結。",oidcUnlinked:"帳戶已解除連結。"},oidc:{title:"SSO / OIDC 提供者",desc:"設定 OpenID Connect 提供者以實現單點登入。",addProvider:"新增提供者",newProvider:"新提供者",empty:"尚未設定 OIDC 提供者。",created:"提供者已建立。",updated:"提供者已更新。",deleted:"提供者已刪除。",deleteTitle:"刪除提供者",deleteMessage:'刪除"{{name}}"？所有連結帳戶將斷開連線。',form:{name:"顯示名稱",issuerUrl:"頒發者 URL",clientId:"客戶端 ID",clientSecret:"客戶端金鑰",scopes:"作用域",iconUrl:"圖示 URL（可選）",enabled:"已啟用",autoCreate:"自動建立使用者",autoCreateDesc:"首次登入時自動建立本機帳戶。",autoLink:"自動連結已有帳戶",autoLinkDesc:"首次登入時透過信箱匹配現有本機帳戶並自動連結。",emailClaim:"電子郵件聲明",emailClaimDesc:"用作電子郵件身份的 JWT 聲明。Azure Entra ID 請使用 'preferred_username' 或 'upn'（不發送 email_verified）。僅使用可信的聲明名稱。",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"要求電子郵件已驗證",requireEmailVerifiedDesc:"僅在提供商將電子郵件聲明標記為已驗證時才接受。",requireEmailVerifiedWarning:"警告：將在未經驗證的情況下接受電子郵件。僅對受信任的提供商使用。",requireEmailVerifiedAutoLink:"請先停用自動連結以變更此設定。",secretHint:"留空以保留目前",secretPlaceholder:"新金鑰"}}},notification:{printStarted:{title:"列印已開始",body:"{{printer}}：{{filename}} 已開始列印"},printCompleted:{title:"列印已完成",body:"{{printer}}：{{filename}} 已成功完成"},printFailed:{title:"列印失敗",body:"{{printer}}：{{filename}} 列印失敗"},printStopped:{title:"列印已停止",body:"{{printer}}：{{filename}} 已停止"},printProgress:{title:"列印進度",body:"{{printer}}：{{filename}} 已完成 {{percent}}%"},printerOffline:{title:"印表機離線",body:"{{printer}} 已離線"},printerError:{title:"印表機錯誤",body:"{{printer}}：{{error}}"},filamentLow:{title:"耗材不足",body:"{{printer}}：耗材即將用完"},maintenanceDue:{title:"維護到期",body:"{{printer}}：{{items}} 需要關注"}},errors:{generic:"出了點問題",networkError:"網路錯誤。請檢查您的連線。",notFound:"未找到",unauthorized:"未授權",serverError:"伺服器錯誤",validationError:"請檢查您的輸入",printerConnectionFailed:"連線印表機失敗",saveFailed:"儲存更改失敗",deleteFailed:"刪除失敗",loadFailed:"載入資料失敗"},hmsErrors:{title:"錯誤 - {{name}}",noErrors:"無錯誤",viewOnWiki:"在拓竹 Wiki 上檢視",clearInstructions:"在印表機上清除錯誤以在此處消除它們。",clearErrors:"清除錯誤",clearSuccess:"HMS 錯誤已清除",clearFailed:"清除 HMS 錯誤失敗"},mqttDebug:{title:"MQTT 偵錯日誌",searchPlaceholder:"搜尋主題或負載...",noMessages:"尚未紀錄訊息",startLoggingHint:'點選"開始紀錄"以開始捕獲 MQTT 訊息',noMessagesMatch:"沒有訊息匹配您的篩選條件",adjustFilterHint:"嘗試調整您的搜尋或篩選條件",incoming:"傳入",outgoing:"傳出",loggingStopped:"紀錄已停止",loggingActive:"紀錄中 - 訊息將自動重新整理",startLogging:"開始紀錄",stopLogging:"停止紀錄",clearLog:"清除日誌",topic:"主題",timestamp:"時間戳",direction:"方向",all:"全部"},printerFiles:{title:"檔案管理器",storageUsed:"已用：",storageFree:"剩餘：",filterPlaceholder:"篩選檔案...",deleteButton:"刪除",deleteFiles:"刪除 {{count}} 個檔案",deleteFileConfirm:'刪除"{{name}}"？此操作無法復原。',deleteFilesConfirm:"刪除 {{count}} 個選中的檔案？此操作無法復原。",noFiles:"印表機上沒有檔案",loadingFiles:"載入檔案中...",failedToLoad:"載入檔案失敗",toast:{filesDeleted:"已刪除 {{count}} 個檔案",deleteFailed:"刪除失敗：{{error}}"}},confirm:{delete:"確定要刪除嗎？",unsavedChanges:"您有未儲存的更改。確定要離開嗎？",clearQueue:"確定要清空佇列嗎？"},login:{title:"Bambuddy 登入",subtitle:"登入您的帳戶",username:"使用者名稱",usernamePlaceholder:"輸入您的使用者名稱",usernameOrEmail:"使用者名稱或信箱",usernameOrEmailPlaceholder:"使用者名稱或 @ 信箱",password:"密碼",passwordPlaceholder:"輸入您的密碼",signIn:"登入",signingIn:"登入中...",rememberMe:"記住我",forgotPassword:"忘記密碼？",loginSuccess:"登入成功",loginFailed:"登入失敗",enterCredentials:"請輸入使用者名稱和密碼",enterEmail:"請輸入您的電子郵件地址",oidcLoginFailed:"OIDC 登入失敗",oidcErrors:{providerError:"身份提供者返回了一個錯誤",missingParameters:"OIDC 回呼缺少必要引數",invalidState:"OIDC 狀態無效或已被使用",stateExpired:"OIDC 登入會話已過期，請重試",providerNotFound:"未找到 OIDC 提供者",discoveryFailed:"無法獲取 OIDC 探索文件",invalidDiscovery:"OIDC 探索文件無效",networkError:"OIDC 權杖交換時出現網路錯誤",badResponse:"OIDC 權杖交換時收到意外回應",noIdToken:"OIDC 提供者未返回 ID 權杖",validationFailed:"OIDC 權杖驗證失敗",nonceMismatch:"OIDC nonce 不符，可能存在重放攻擊",missingSubClaim:"OIDC 權杖缺少 sub 宣告",noLinkedAccount:"沒有與此 OIDC 身份連結的本機帳戶",accountInactive:"您的帳戶已被停用",userResolutionFailed:"無法解析您的帳戶",internalError:"OIDC 登入過程中發生內部錯誤",tokenExchangeFailed:"OIDC 權杖交換失敗"},forgotPasswordTitle:"忘記密碼",forgotPasswordMessage:"如果您忘記了密碼，請聯絡系統管理員進行重設。",forgotPasswordEmailMessage:"輸入您的信箱地址，我們將向您傳送新密碼。",emailAddress:"信箱地址",emailPlaceholder:"your.email@example.com",cancel:"取消",sending:"傳送中...",sendResetEmail:"傳送重設郵件",howToReset:"如何重設密碼：",resetStep1:"聯絡您的 Bambuddy 管理員",resetStep2:"請他們在使用者管理中重設您的密碼",resetStep3:"他們可以為您設定一個臨時密碼",resetStep4:"使用新密碼登入並在設定中修改密碼",gotIt:"知道了",resetPassword:{title:"設定新密碼",subtitle:"請在下方輸入並確認您的新密碼。",newPassword:"新密碼",newPasswordPlaceholder:"至少 8 個字元",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"重複輸入新密碼",saving:"儲存中…",submit:"設定新密碼",backToLogin:"回到登入",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 8 個字元",resetFailed:"密碼重設失敗。連結可能已過期。"},twoFA:{title:"兩步驗證",subtitle:"您的帳戶已啟用兩步驗證。請在下方輸入驗證碼。",methodAuthenticator:"身份驗證器 App",methodEmail:"信箱驗證碼",methodBackup:"備用恢復碼",instructionsTotp:"請開啟您的身份驗證器 App，輸入 Bambuddy 的 6 位驗證碼。",instructionsEmail:"6 位驗證碼已傳送至您的信箱，有效期為 10 分鐘。",instructionsEmailNotSent:"點選下方按鈕，透過郵件獲取驗證碼。",instructionsBackup:"請輸入您的一個 8 位備用恢復碼。每個恢復碼只能使用一次。",sendCodeButton:"傳送信箱驗證碼",sendingCode:"傳送中...",resendCode:"重新傳送驗證碼",codeLabel:"驗證碼",backupCodeLabel:"備用恢復碼",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"驗證",verifyingButton:"驗證中...",backToLogin:"← 回到登入頁面",orContinueWith:"或透過以下方式登入",signInWith:"使用 {{provider}} 登入",enterCode:"請輸入驗證碼",sendCodeFailed:"驗證碼傳送失敗",invalidCode:"無效驗證碼，請重試。"}},setup:{title:"Bambuddy 設定",subtitle:"為您的 Bambuddy 實例設定身份驗證",enableAuth:"啟用身份驗證",adminAccount:"管理員帳戶",adminAccountDesc:"如果管理員使用者已存在，將使用現有管理員帳戶啟用身份驗證。如需使用現有管理員，請將下方欄位留空，或輸入新憑據建立新管理員使用者。",adminUsername:"管理員使用者名稱",adminPassword:"管理員密碼",optionalIfAdminExists:"（如管理員使用者已存在則為可選）",adminUsernamePlaceholder:"輸入管理員使用者名稱（可選）",adminPasswordPlaceholder:"輸入管理員密碼（可選）",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"確認管理員密碼",settingUp:"設定中...",completeSetup:"完成設定",toast:{authEnabledAdminCreated:"身份驗證已啟用並建立了管理員使用者",authEnabledExistingAdmins:"使用現有管理員使用者啟用了身份驗證",setupCompleted:"設定完成",enterBothCredentials:"請輸入管理員使用者名稱和密碼，或將兩者留空以使用現有管理員使用者",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元"}},changePassword:{title:"修改密碼",currentPassword:"目前密碼",currentPasswordPlaceholder:"輸入目前密碼",newPassword:"新密碼",newPasswordPlaceholder:"輸入新密碼（至少 6 個字元）",confirmPassword:"確認新密碼",confirmPasswordPlaceholder:"確認新密碼",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元",changing:"修改中...",success:"密碼修改成功",failed:"密碼修改失敗"},plateAlert:{title:"列印已暫停！",message:"在列印板上偵測到物體。列印已自動暫停。請清理列印板並繼續列印。",understand:"我知道了"},camera:{title:"攝影機檢視",invalidPrinterId:"無效的印表機 ID",live:"即時",snapshot:"快照",restartStream:"重新啟動流",refreshSnapshot:"重新整理快照",fullscreen:"全螢幕",exitFullscreen:"離開全螢幕",connectingToCamera:"連線攝影機中...",capturingSnapshot:"拍攝快照中...",connectionLost:"連線已斷開",connectionFailed:"攝影機連線失敗",reconnecting:"{{countdown}} 秒後重新連線...（第 {{attempt}}/{{max}} 次嘗試）",reconnectNow:"立即重新連線",cameraUnavailable:"攝影機不可用",cameraUnavailableDesc:"請確保印表機已通電並已連線。",noCamera:"無可用攝影機",retry:"重試",cameraStream:"攝影機流",zoomOut:"縮小",zoomIn:"放大",resetZoom:"重設縮放",recording:"錄製中",startRecording:"開始錄製",stopRecording:"停止錄製",chamberLight:"切換腔室燈"},groups:{title:"群組管理",subtitle:"管理存取控制的權限群組",backToSettings:"返回設定",createGroup:"建立群組",noPermission:"您沒有存取此頁面的權限。",system:"系統",noDescription:"無描述",usersCount:"{{count}} 個使用者",permissionsCount:"{{count}} 個權限",edit:"編輯",delete:"刪除",toast:{created:"群組建立成功",updated:"群組更新成功",deleted:"群組刪除成功",enterGroupName:"請輸入群組名稱"},modal:{editGroup:"編輯群組",createGroup:"建立群組",cancel:"取消",saving:"儲存中...",creating:"建立中...",saveChanges:"儲存更改"},form:{groupName:"群組名稱",groupNamePlaceholder:"輸入群組名稱",systemGroupWarning:"系統群組名稱不可更改",description:"描述",descriptionPlaceholder:"輸入描述（可選）",permissions:"權限（已選 {{count}} 個）"},deleteModal:{title:"刪除群組",message:"確定要刪除此群組嗎？此群組中的使用者將失去這些權限。",confirm:"刪除群組"},editor:{title:"編輯群組",createTitle:"建立群組",search:"搜尋權限...",selectAll:"全選",clearAll:"清除全部",permissionsSelected:"已選 {{count}} 個",noResults:"沒有權限匹配您的搜尋"}},users:{title:"使用者管理",subtitle:"管理使用者及其對 Bambuddy 實例的存取",backToSettings:"返回設定",createUser:"建立使用者",noPermission:"您沒有存取此頁面的權限。",admin:"管理員",noGroups:"無群組",active:"活躍",inactive:"非活躍",edit:"編輯",delete:"刪除",system:"系統",noGroupsAvailable:"無可用群組",table:{username:"使用者名稱",groups:"群組",status:"狀態",actions:"操作"},toast:{created:"使用者建立成功",updated:"使用者更新成功",deleted:"使用者刪除成功",fillRequired:"請填寫所有必填欄位",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元"},modal:{createUser:"建立使用者",editUser:"編輯使用者",cancel:"取消",creating:"建立中...",saving:"儲存中...",saveChanges:"儲存更改",advancedAuthSubtitle:"使用進階認證"},form:{username:"使用者名稱",usernamePlaceholder:"輸入使用者名稱",email:"信箱",emailPlaceholder:"user@example.com",password:"密碼",passwordPlaceholder:"輸入密碼",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"確認密碼",newPasswordPlaceholder:"輸入新密碼",confirmNewPasswordPlaceholder:"確認新密碼",leaveBlankToKeep:"留空以保持目前值",groups:"群組",optional:"可選",autoGeneratedPassword:"將自動產生安全密碼並透過郵件傳送給使用者。",passwordManagedByAdvancedAuth:'密碼由進階認證管理。使用"重設密碼"透過郵件向使用者傳送新密碼。',resetPassword:"重設密碼",resettingPassword:"重設密碼中..."},deleteModal:{title:"刪除使用者",message:"確定要刪除此使用者嗎？此操作無法復原。",confirm:"刪除使用者"}},streamOverlay:{title:"流疊加層",invalidPrinterId:"無效的印表機 ID",cameraStream:"攝影機流",progress:"進度",eta:"預計完成時間",printerIdle:"印表機空閒",printerOffline:"印表機離線",status:{printing:"列印中",paused:"已暫停",finished:"已完成",failed:"失敗",idle:"空閒",unknown:"未知"}},profiles:{title:"設定檔案",subtitle:"管理您的切片預設和壓力推進校準",tabs:{cloud:"雲端設定檔案",local:"本機設定檔案",kprofiles:"K 值設定"},localProfiles:{title:"本機設定檔案",subtitle:"從 OrcaSlicer 匯入和管理切片預設",import:"匯入設定檔案",importDesc:"將 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 檔案拖放到此處",importing:"匯入中...",search:"搜尋本機預設...",noPresets:"尚無本機預設",badge:"本機",edit:"編輯",delete:"刪除",cancel:"取消",deleteConfirmTitle:"刪除預設",deleteConfirm:"確定要刪除此預設嗎？此操作無法復原。",source:"來源",inheritsFrom:"繼承自",filamentType:"類型",vendor:"廠商",compatiblePrinters:"相容印表機",nozzleTemp:"噴嘴溫度",cost:"成本",density:"密度",pressureAdvance:"壓力推進",filament:"耗材",process:"工藝",printer:"印表機",toast:{importSuccess:"已匯入 {{count}} 個預設",importSkipped:"跳過 {{count}} 個預設（重複）",importError:"匯入時出現 {{count}} 個錯誤",deleted:"預設已刪除",updated:"預設已更新"}},connectedAs:"已連線為",logout:"登出",noLogoutPermission:"您沒有登出的權限",failedToLoad:"載入設定檔案失敗",retry:"重試",time:{justNow:"剛剛",minsAgo:"{{count}} 分鐘前",hoursAgo:"{{count}} 小時前",daysAgo:"{{count}} 天前"},toast:{loggedOut:"已登出"},login:{title:"連線到拓竹雲",subtitle:"跨裝置同步您的切片預設",email:"信箱",password:"密碼",region:"地區",regionGlobal:"全球",regionChina:"中國",verificationCode:"驗證碼",totpCode:"驗證器驗證碼",checkEmail:"檢查您的信箱 ({{email}}) 獲取 6 位驗證碼",enterTotpHint:"輸入驗證器 App 中的 6 位驗證碼",accessToken:"存取權杖",accessTokenHint:"貼上您的拓竹存取權杖（來自 Bambu Studio）",back:"返回",loginButton:"登入",verifyButton:"驗證",setTokenButton:"設定權杖",useToken:"改用存取權杖",useEmail:"改用信箱登入",toast:{loggedIn:"登入成功",codeSent:"驗證碼已傳送到您的信箱",enterTotp:"輸入驗證器 App 中的程式碼",tokenSet:"權杖設定成功"}},presets:{myPreset:"我的預設（可編輯）",duplicate:"複製",editable:"可編輯",failedToLoadDetails:"載入預設詳情失敗",deleteConfirm:"刪除此預設？",deleteWarning:'這將從拓竹雲中永久刪除"{{name}}"。此操作無法復原。',noDuplicatePermission:"您沒有複製預設的權限",noEditPermission:"您沒有編輯預設的權限",noDeletePermission:"您沒有刪除預設的權限",types:{filament:"耗材預設",printer:"印表機預設",process:"工藝預設"},toast:{deleted:"預設已刪除",created:"預設已建立",updated:"預設已更新",duplicated:"預設已複製",fieldAdded:'欄位"{{key}}"已新增',exported:"預設已匯出"},baseLabel:"基礎：{{name}}",currentLabel:"目前：{{name}}",newPreset:"新增預設",editPreset:"編輯預設",duplicatePreset:"複製預設",createNewPreset:"建立新預設",customizeSettings:"自訂新預設的設定",compareWithBase:"與基礎預設比較",compare:"比較",basePreset:"基礎預設",selectBasePreset:"選擇基礎預設...",presetName:"預設名稱",myCustomPreset:"我的自訂預設",inheritsFrom:"繼承自",dropJsonToImport:"拖放 JSON 以匯入",tabs:{common:"常用",allFields:"所有欄位"},availableFields:"可用欄位",searchFieldsPlaceholder:"搜尋欄位...",noMatchingFields:"沒有匹配的欄位",allFieldsAdded:"所有欄位已新增",addCustomField:"新增自訂欄位",yourOverrides:"您的覆蓋值",noOverridesYet:"尚無覆蓋值",clickFieldsToAdd:"點選左側的欄位進行新增",saveAsTemplate:"儲存為範本",jsonTip:"提示：將 .json 檔案拖放到此對話方塊的任意位置以匯入設定"},cloudView:{searchPlaceholder:"搜尋預設...",templates:"範本",refresh:"重新整理",newPreset:"新增預設",clearFilters:"清除篩選",compareMode:"比較模式",selectAnotherPreset:"選擇另一個 {{type}} 預設",clickTwoPresets:"點選兩個相同類型的預設進行比較",selectFirst:"1. 選擇第一個",selectSecond:"2. 選擇第二個",compareNow:"立即比較",lastSynced:"上次同步：",showingCount:"顯示 {{showing}} / {{total}} 個預設",noPresetsFound:"未找到預設",columns:{filament:"耗材",process:"工藝",printer:"印表機"},noFilamentPresets:"無耗材預設",noProcessPresets:"無工藝預設",noPrinterPresets:"無印表機預設",filters:{type:"類型",owner:"所有者",printer:"印表機",nozzle:"噴嘴",filament:"耗材",layer:"層",all:"全部",myPresets:"我的預設",builtIn:"內建",process:"工藝"},noTemplatesPermission:"您沒有管理範本的權限",noRefreshPermission:"您沒有重新整理設定檔案的權限",noCreatePermission:"您沒有建立預設的權限"},templates:{title:"快速範本",noTemplates:"尚無範本",createFirst:"從預設編輯器建立範本",typeFilter:"類型：",deleteTitle:"刪除範本",deleteWarning:"此操作無法復原",deleteConfirm:'確定要刪除"{{name}}"嗎？',namePlaceholder:"範本名稱",descriptionPlaceholder:"描述",settingsJson:"設定 (JSON)",fieldsCount:"{{count}} 個欄位",shownInModals:"在對話方塊中顯示",hiddenInModals:"在對話方塊中隱藏",apply:"套用",toast:{deleted:"範本已刪除",updated:"範本已更新",created:"範本已建立",applied:"範本已套用"}}},support:{debugLoggingActive:"偵錯日誌紀錄已啟用",manageLogs:"管理",collectItem7:"印表機連線和韌體版本",collectItem8:"整合狀態（Spoolman、MQTT、HA）",collectItem9:"網路介面（僅子網）",collectItem10:"Python 套件版本",collectItem11:"資料庫健康檢查",collectItem12:"Docker 環境詳情"},fileManager:{title:"檔案管理器",subtitle:"組織和管理您的列印檔案",uploadFiles:"上傳檔案",newFolder:"新增資料夾",folderName:"資料夾名稱",folderNamePlaceholder:"例如：功能零件",renameFile:"重新命名檔案",renameFolder:"重新命名資料夾",moveFiles:"移動 {{count}} 個檔案",rootNoFolder:"根目錄（無資料夾）",current:"目前",linkFolder:"連結資料夾",linkFolderDescription:'將"{{name}}"連結到專案或歸檔以便快速存取。',project:"專案",archive:"歸檔",noProjectsFound:"未找到專案",noArchivesFound:"未找到歸檔",unlink:"取消連結",link:"連結",dragDropFiles:"將檔案拖放到此處",dropFilesHere:"將檔案放在此處",orClickToBrowse:"或點選瀏覽",allFileTypesSupported:"支援所有檔案類型。ZIP 檔案將被解壓。",zipFilesDetected:"偵測到 ZIP 檔案",zipExtractOptions:"ZIP 檔案將被解壓。選擇如何處理資料夾結構：",preserveZipStructure:"保留 ZIP 中的資料夾結構",createFolderFromZip:"從 ZIP 檔名建立資料夾",stlThumbnailGeneration:"STL 縮圖產生",zipMayContainStl:"ZIP 檔案可能包含 STL 檔案。可以在解壓時產生縮圖。",thumbnailsCanBeGenerated:"可以為 STL 檔案產生縮圖。大型模型可能需要更長時間處理。",generateThumbnailsForStl:"為 STL 檔案產生縮圖",threemfDetected:"偵測到 3MF 檔案",threemfExtractionInfo:"將自動從 3MF 檔案中提取印表機型號、材料、顏色和列印設定。",willBeExtracted:"將被解壓",filesExtracted:"已解壓 {{count}} 個檔案",uploadComplete:"上傳完成：{{succeeded}} 個成功",uploadFailed:"上傳失敗",zipFilesFailed:"{{count}} 個檔案失敗",uploading:"上傳中...",changeLink:"更改連結...",linkTo:"連結到...",linkToProjectOrArchive:"連結到專案或歸檔",addToQueue:"新增到佇列",schedulePrint:"排程",generateThumbnail:"產生縮圖",generateThumbnails:"產生縮圖",generateThumbnailsForMissing:"為缺少縮圖的 STL 檔案產生縮圖",gridView:"網格檢視",listView:"列表檢視",lowDiskSpaceWarning:"磁碟空間不足警告",lowDiskSpaceDetails:"僅剩 {{free}}（總共 {{total}}）。閾值設定為 {{threshold}} GB。",files:"檔案",folders:"資料夾",size:"大小",free:"剩餘",allFiles:"所有檔案",wrap:"換行",enableTextWrapping:"啟用文字換行",disableTextWrapping:"停用文字換行",collapse:"折疊",collapseFoldersByDefault:"預設折疊資料夾",expandFoldersByDefault:"預設展開資料夾",dragToResizeTooltip:"拖曳調整大小，雙擊重設",searchFiles:"搜尋檔案...",allTypes:"所有類型",prints:"列印",ascending:"升序",descending:"降序",resultsCount:"{{showing}} / {{total}} 個檔案",selectAll:"全選",deselectAll:"取消全選",selected:"已選擇 {{count}} 個",adding:"新增中...",loadingFiles:"載入檔案中...",folderIsEmpty:"資料夾為空",noFilesYet:"尚無檔案",folderEmptyDescription:"上傳檔案或將檔案移入此資料夾以開始使用。",noFilesDescription:"上傳檔案以開始組織您的列印相關檔案。",noMatchingFiles:"沒有匹配的檔案",noMatchingFilesDescription:"沒有檔案匹配您目前的搜尋或篩選條件。",clearFilters:"清除篩選",printedCount:"已列印 {{count}} 次",uploadedBy:"上傳者",deleteFolder:"刪除資料夾",deleteFile:"刪除檔案",deleteFilesCount:"刪除 {{count}} 個檔案",deleteFolderConfirm:"確定要刪除此資料夾嗎？其中的所有檔案也將被刪除。",deleteFileConfirm:"確定要刪除此檔案嗎？",deleteFilesConfirm:"確定要刪除 {{count}} 個選中的檔案嗎？此操作無法復原。",deleting:"刪除中...",noPermissionRenameFolder:"您沒有重新命名資料夾的權限",noPermissionLinkFolder:"您沒有連結資料夾的權限",noPermissionDeleteFolder:"您沒有刪除資料夾的權限",noPermissionPrint:"您沒有列印的權限",noPermissionSlice:"You do not have permission to slice files",noPermissionAddToQueue:"您沒有新增到佇列的權限",noPermissionDownload:"您沒有下載檔案的權限",noPermissionRenameFile:"您沒有重新命名此檔案的權限",noPermissionGenerateThumbnail:"您沒有產生縮圖的權限",noPermissionDeleteFile:"您沒有刪除此檔案的權限",noPermissionCreateFolder:"您沒有建立資料夾的權限",noPermissionUpload:"您沒有上傳檔案的權限",noPermissionMoveFiles:"您沒有移動檔案的權限",noPermissionDeleteFiles:"您沒有刪除檔案的權限",linkExternal:"連結外部",linkExternalFolder:"連結外部資料夾",linkExternalFolderDescription:"將主機目錄（NAS、USB、網路共享）掛載到檔案管理器中。檔案不會被複制——直接從原始路徑存取。",externalFolderNamePlaceholder:"例如：NAS列印檔案",externalPath:"主機路徑",externalPathHelp:"Docker主機上目錄的絕對路徑。必須以繫結掛載方式掛載到容器中。",readOnly:"只讀",readOnlyHelp:"防止上傳和刪除",showHiddenFiles:"顯示隱藏檔案（點檔案）",externalFolder:"外部資料夾",scanFolder:"掃描",toast:{folderCreated:"資料夾已建立",folderDeleted:"資料夾已刪除",fileDeleted:"檔案已刪除",filesDeleted:"已刪除 {{count}} 個檔案",filesMoved:"檔案已移動",folderLinked:"資料夾已連結",folderUnlinked:"資料夾已取消連結",externalFolderLinked:"外部資料夾已連結並掃描",folderScanned:"掃描完成：新增 {{added}} 個，移除 {{removed}} 個",addedToQueue:"已將 {{count}} 個檔案新增到佇列",addedToQueuePartial:"已新增 {{added}} 個檔案，{{failed}} 個失敗",failedToAddToQueue:"新增檔案失敗：{{error}}",fileRenamed:"檔案已重新命名",folderRenamed:"資料夾已重新命名",thumbnailsGenerated:"已產生 {{count}} 個縮圖",thumbnailsGeneratedPartial:"已產生 {{succeeded}} 個縮圖，{{failed}} 個失敗",noStlMissingThumbnails:"沒有缺少縮圖的 STL 檔案",failedToGenerateThumbnails:"產生縮圖失敗：{{error}}",thumbnailGenerated:"縮圖已產生",failedToGenerateThumbnail:"產生縮圖失敗：{{error}}"}},projects:{title:"專案",subtitle:"組織和追蹤您的 3D 列印專案",newProject:"新增專案",editProject:"編輯專案",deleteProject:"刪除專案",projectName:"專案名稱",description:"描述",noProjects:"尚無專案",noProjectsFiltered:"沒有{{status}}專案",noProjectsFilteredHelp:"您沒有任何{{status}}專案。當專案狀態更改時，它們將出現在這裡。",createFirst:"建立您的第一個項目以開始組織相關列印、追蹤進度和管理構建。",createFirstButton:"建立您的第一個項目",create:"建立",files:"檔案",prints:"列印",plates:"板",parts:"零件",lastModified:"最後修改",deleteConfirm:"確定要刪除此項目嗎？歸檔和佇列項目將被取消連結但不會被刪除。",addFiles:"新增檔案",removeFile:"移除檔案",viewDetails:"檢視詳情",namePlaceholder:"例如：Voron 2.4 構建",urlLabel:"網址",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"網址必須以 http:// 或 https:// 開頭",openExternalUrl:"開啟專案網址",coverImageLabel:"封面圖片",coverImageAlt:"專案封面圖片",coverImageUpload:"上傳",coverImageReplace:"替換",coverImageRemove:"移除",descriptionPlaceholder:"可選描述...",color:"顏色",targetPlates:"目標板數",targetPlatesPlaceholder:"例如：25",targetPlatesHelp:"列印任務數量",targetParts:"目標零件數",targetPartsPlaceholder:"例如：150",targetPartsHelp:"所需零件總數",tagsLabel:"標籤（逗號分隔）",tagsPlaceholder:"例如：voron、功能件、禮物",dueDate:"截止日期",priority:"優先順序",priorityLow:"低",priorityNormal:"普通",priorityHigh:"高",priorityUrgent:"緊急",statusActive:"進行中",statusCompleted:"已完成",statusArchived:"已歸檔",done:"完成",completed:"已完成",failed:"失敗",inQueue:"佇列中",noPrintsYet:"尚無列印",printJobs:"列印任務（板）",partsPrinted:"已列印零件",failedParts:"失敗零件",import:"匯入",export:"匯出",importProject:"匯入專案",exportAll:"匯出所有專案",loading:"載入專案中...",noEditPermission:"您沒有編輯專案的權限",noDeletePermission:"您沒有刪除專案的權限",noCreatePermission:"您沒有建立專案的權限",noImportPermission:"您沒有匯入專案的權限",noExportPermission:"您沒有匯出專案的權限",toast:{created:"專案已建立",updated:"專案已更新",deleted:"專案已刪除",imported:"專案已匯入",multipleImported:"已匯入 {{count}} 個項目",importFailed:"匯入失敗",exported:"專案已匯出（僅中繼資料）"}},projectDetail:{notFound:"未找到專案",backToProjects:"返回專案",export:"匯出",exportProject:"匯出專案",noExportPermission:"您沒有匯出專案的權限",noEditPermission:"您沒有編輯專案的權限",partOf:"屬於：",priorityLabel:"優先順序：",noPrints:"此項目尚無列印",status:{active:"進行中",completed:"已完成",archived:"已歸檔"},priority:{low:"低",normal:"普通",high:"高",urgent:"緊急"},dueDate:{overdue:"已逾期",today:"今天到期",daysLeft:"還有 {{count}} 天"},progress:{platesProgress:"板進度",partsProgress:"零件進度",printJobs:"列印任務",parts:"零件",percentComplete:"{{percent}}% 完成",remaining:"剩餘 {{count}} 個"},stats:{printJobs:"列印任務",total:"總計",failed:"{{count}} 個失敗",partsPrinted:"已列印 {{count}} 個零件",printTime:"列印時間",filamentUsed:"耗材用量"},cost:{title:"成本追蹤",filamentCost:"耗材成本",energy:"能源",totalCost:"總成本",total:"總計",includesBom:"含物料清單",budget:"預算",remaining:"剩餘"},subProjects:{title:"子專案 ({{count}})"},notes:{title:"備註",noEditPermission:"您沒有編輯備註的權限",placeholder:"新增關於此項目的備註...",empty:"尚無備註。點選編輯新增備註。"},files:{title:"檔案",linkFolders:"從檔案管理器連結資料夾",forQuickAccess:"到此項目以便快速存取。",fileCount:"{{count}} 個檔案",empty:"未連結資料夾。前往檔案管理器將資料夾連結到此項目。",noFiles:"此資料夾中沒有檔案。",print:"立即列印",addToQueue:"加入佇列"},bom:{title:"材料清單",acquired:"已獲取 {{completed}}/{{total}}",showAll:"顯示全部",hideDone:"隱藏已完成",addPart:"新增零件",noAddPermission:"您沒有新增零件的權限",partNamePlaceholder:"零件名稱（例如：M3x8 螺絲）",partName:"零件名稱",qty:"數量",price:"價格 ({{currency}})",sourcingUrlPlaceholder:"採購連結（可選）",remarksPlaceholder:"備註（可選）",deletePart:"刪除零件",deleteConfirm:'確定要刪除"{{name}}"嗎？',noUpdatePermission:"您沒有更新零件的權限",noEditPermission:"您沒有編輯零件的權限",noDeletePermission:"您沒有刪除零件的權限",totalCost:"總成本：",empty:"材料清單中沒有零件。新增硬體、電子元件或其他元件以追蹤需要採購的物品。"},timeline:{title:"活動時間線",empty:"尚無活動。"},template:{saveAsTemplate:"儲存為範本",noCreatePermission:"您沒有建立範本的權限"},queue:{title:"佇列",viewAll:"檢視全部",printing:"{{count}} 個列印中",queued:"{{count}} 個佇列中"},prints:{title:"列印 ({{count}})"},toast:{projectUpdated:"專案已更新",partAdded:"零件已新增",partRemoved:"零件已移除",exportFailed:"匯出失敗",projectExported:"專案已匯出",templateCreated:"範本已建立"}},system:{title:"系統資訊",version:"版本",uptime:"執行時間",cpuUsage:"CPU 使用率",memoryUsage:"記憶體使用率",diskUsage:"磁碟使用率",networkInfo:"網路資訊",logs:"日誌",debugMode:"偵錯模式",enableDebug:"啟用偵錯日誌",disableDebug:"停用偵錯日誌",downloadLogs:"下載日誌",clearLogs:"清除日誌",dockerInfo:"Docker 資訊",containerName:"容器名稱",imageName:"映象名稱",platform:"平臺",architecture:"架構"},library:{title:"耗材庫",addFilament:"新增耗材",editFilament:"編輯耗材",deleteFilament:"刪除耗材",vendor:"廠商",material:"材料",color:"顏色",kFactor:"K 值",temperature:"溫度",noFilaments:"耗材庫中沒有耗材",deleteConfirm:"確定要刪除此耗材嗎？",importFromPrinter:"從印表機匯入",exportToFile:"匯出到檔案"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Spoolman 整合",enabled:"Spoolman 已啟用",url:"Spoolman URL",connected:"已連線",disconnected:"未連線",testConnection:"測試連線",sync:"同步",syncing:"同步中...",lastSync:"上次同步",linkToSpoolman:"連結到 Spoolman",openInSpoolman:"在 Spoolman 中開啟",unlinkSpool:"取消連結耗材",unlinkConfirmTitle:"解開料盤？",unlinkConfirmMessage:"這將斷開卷軸與 Spoolman 的連線。Spoolman 中的卷軸資料將保持不變。",selectSpool:"選擇耗材",noUnlinkedSpools:"無未連結的耗材",linkSuccess:"耗材已成功連結到 Spoolman",linkFailed:"連結耗材失敗",unlinkSuccess:"已成功從 Spoolman 取消連結耗材",unlinkFailed:"取消連結耗材失敗",spoolId:"耗材 ID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"剩餘",disableWeightSync:"停用 AMS 估計重量同步",disableWeightSyncDesc:"不從 AMS 估計值更新剩餘容量。如果您更喜歡 Spoolman 的用量追蹤而非 AMS 百分比估計，請使用此選項。新耗材仍將使用 AMS 估計值作為初始重量。",reportPartialUsage:"報告失敗列印的部分用量",reportPartialUsageDesc:"當列印失敗或被取消時，根據層進度報告估計的耗材使用量。"},inventory:{title:"耗材庫存",spoolmanMixedContentTitle:"Spoolman 無法透過 HTTPS 載入 — 瀏覽器已封鎖混合內容",spoolmanMixedContentBody:"Bambuddy 透過您的反向代理以 HTTPS 提供服務，但您的 Spoolman 位址仍為 HTTP。基於安全考量，瀏覽器會封鎖混合內容，因此內嵌的 Spoolman 介面無法載入。Spoolman 也必須可透過 HTTPS 存取。",spoolmanMixedContentFixReverseProxy:"請將 Spoolman 置於與 Bambuddy 相同的反向代理（Traefik / Nginx / Caddy）之後並啟用 HTTPS，然後在設定中將 Spoolman URL 更新為新的 HTTPS 位址。",spoolmanMixedContentFixOpenNewTab:"作為替代方案，可在新分頁以 HTTP 開啟 Spoolman — 混合內容規則僅適用於內嵌框架，獨立分頁仍可正常運作。",spoolmanOpenInNewTab:"在新分頁開啟 Spoolman",addSpool:"新增耗材",editSpool:"編輯耗材",material:"材料",selectMaterial:"選擇材料...",subtype:"子類型",brand:"品牌",searchBrand:"搜尋品牌...",useCustomBrand:'使用"{{brand}}"',useCustomMaterial:"使用自訂材料：{{material}}",colorName:"顏色名稱",colorNamePlaceholder:"翡翠白、烈焰紅...",color:"顏色",hexColor:"十六進位顏色",pickColor:"選擇自訂顏色",labelWeight:"標籤重量",coreWeight:"空盤重量",searchSpoolWeight:"搜尋耗材重量...",weightUsed:"已使用",currentWeight:"剩餘重量",measuredWeight:"稱量重量",spoolName:"料盤",costPerKg:"每公斤成本",measuredWeightError:"稱量重量必須在 {{min}}g 到 {{max}}g 之間。",slicerFilament:"切片耗材",slicerFilamentName:"切片預設名稱",slicerPreset:"切片預設",searchPresets:"搜尋耗材預設...",selectedPreset:"已選擇",noPresetsFound:"未找到預設",tempOverrides:"溫度覆蓋",note:"備註",notePlaceholder:"關於此耗材的任何備註...",category:"類別",categoryPlaceholder:"例如：生產、原型、客戶A",categoryNone:"未分類",lowStockThresholdOverride:"低庫存閾值（此料盤）",lowStockThresholdOverrideHelp:"留空以使用全域閾值（{{global}}%）。",clearRfid:"清除 RFID 標籤",rfidCleared:"RFID 標籤已清除",archive:"歸檔",restore:"恢復",noSpools:"尚無耗材。新增您的第一個耗材開始使用。",noAvailableSpools:"沒有可用的耗材。請先向庫存中新增耗材，或從其他槽位取消指派一個耗材。",kProfiles:"K 值設定",addKProfile:"新增 K 值設定",assignSpool:"分配耗材",unassignSpool:"取消分配",assignSuccess:"耗材已分配，AMS 槽位已設定",assignFailed:"分配耗材失敗",assignMismatchTitle:"材料不符",assignMismatchMessage:'所選料盤材料 "{{spoolMaterial}}" 與 {{location}} 的料槽材料 "{{trayMaterial}}" 不符。仍要分配嗎？',assignMismatchConfirm:"仍然分配",assignPartialMismatchMessage:'料盤材料 "{{spoolMaterial}}" 與 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否繼續？',assignProfileMismatchMessage:'料盤設定 "{{spoolProfile}}" 與 {{location}} 的料槽設定 "{{trayProfile}}" 不一致。是否繼續？',selectSpool:"選擇要分配到此槽位的耗材",assigned:"已分配",assigning:"分配中...",searchSpools:"搜尋耗材...",showAllSpools:"顯示所有耗材",allMaterials:"所有材料",filterByBrand:"按品牌篩選...",showArchived:"顯示已歸檔",quickAdd:"快速新增（庫存）",quantity:"數量",stock:"庫存",configured:"已設定",spoolsCreated:"已建立 {{count}} 個耗材",spoolCreated:"耗材已建立",spoolUpdated:"耗材已更新",spoolDeleted:"耗材已刪除",spoolArchived:"耗材已歸檔",spoolRestored:"耗材已恢復",deleteConfirm:"確定要刪除此耗材嗎？此操作無法復原。",archiveConfirm:"確定要歸檔此耗材嗎？",advancedSettings:"進階設定",filamentInfoTab:"耗材資訊",paProfileTab:"PA 設定",filamentInfo:"耗材",additional:"附加",loadingPresets:"載入雲端預設中...",cloudConnected:"雲端已連線",cloudNotConnected:"雲端未連線（使用預設值）",recentColors:"最近",searchColors:"搜尋顏色...",searchResults:"搜尋結果",allColors:"所有顏色",commonColors:"常用顏色",showLess:"顯示更少",showAll:"顯示全部",noColorsFound:"沒有顏色匹配您的搜尋",noResults:"未找到匹配項",extraColorsLabel:"附加顏色",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"貼上 2 至 8 個十六進位色值,以逗號分隔。將以漸層方式呈現。",extraColorsInvalid:"已略過無效的十六進位值:{{tokens}}",colorEffectLabel:"效果",colorEffect:{none:"無",sparkle:"閃光",wood:"木紋",marble:"大理石",glow:"夜光",matte:"霧面",silk:"絲光",galaxy:"星空",rainbow:"彩虹",metal:"金屬",translucent:"半透明",gradient:"漸層",dualColor:"雙色",triColor:"三色",multicolor:"多色"},selectMaterialFirst:"請先在耗材資訊分頁中選擇材料。",noPrintersConfigured:"未設定印表機。新增印表機以使用 PA 設定。",matchingFilter:"匹配",anyBrand:"任何品牌",anyVariant:"任何變體",autoSelect:"自動選擇",matches:"匹配",match:"匹配",noMatches:"無匹配",connected:"已連線",offline:"離線",printerOffline:"印表機離線。連線後檢視校準設定。",noKProfilesMatch:"沒有 K 值設定匹配所選耗材。",leftNozzle:"左噴嘴",rightNozzle:"右噴嘴",profilesSelected:"個校準設定已選擇",totalInventory:"總庫存",totalConsumed:"總消耗",byMaterial:"按材料",inPrinter:"在印表機中",lowStock:"庫存不足",sinceTracking:"自開始追蹤",loadedInAms:"已裝載到 AMS/外接",remaining:"剩餘",weightCheck:"重量檢查",lastWeighed:"上次稱量",neverWeighed:"從未稱量",search:"搜尋耗材...",showing:"顯示",to:"到",of:"共",show:"顯示",spools:"個耗材",spool:"個耗材",page:"頁",noSpoolsMatch:"未找到結果",noSpoolsMatchDesc:"嘗試調整您的搜尋或篩選條件。",active:"活躍",archived:"已歸檔",all:"全部",used:"已使用",new:"新的",clearFilters:"清除篩選",table:"表格",cards:"卡片",net:"淨重",groupSimilar:"分組",groupedSpools:"{{count}} 個相同耗材",groupedRows:"行",columns:"列",configureColumns:"設定列",configureColumnsDesc:"拖曳以重新排序列或使用箭頭。使用眼睛圖示切換可見性。",visible:"可見",reset:"重設",cancel:"取消",applyChanges:"套用更改",moveUp:"上移",moveDown:"下移",hideColumn:"隱藏列",showColumn:"顯示列",linkToSpool:"連結到耗材",tagLinked:"標籤已連結到耗材",tagLinkFailed:"連結標籤失敗",tagAlreadyLinked:"標籤已連結到其他耗材",unknownTag:"偵測到未知 RFID 標籤",usageHistory:"使用歷史",noUsageHistory:"尚無使用紀錄",printName:"列印名稱",weightConsumed:"消耗重量",clearHistory:"清除",historyCleared:"使用歷史已清除",fillSourceLabel:"(庫存)",lowStockThresholdError:"閾值必須在 0.1 到 99.9 之間"},timelapse:{title:"縮時攝影",create:"建立縮時攝影",download:"下載",delete:"刪除",preview:"預覽",frameRate:"幀率",quality:"品質",processing:"處理中...",noTimelapses:"無可用縮時攝影"},ams:{title:"AMS",slot:"槽位",empty:"空",emptySlot:"空槽位",unknown:"未知",humidity:"濕度",temperature:"溫度",filamentType:"耗材類型",filamentColor:"顏色",remaining:"剩餘",history:"AMS 歷史",noHistory:"無可用歷史",configureSlot:"設定槽位",externalSpool:"外接耗材",profile:"設定",kFactor:"K 值",fill:"填充",configure:"設定",used:"已使用",remainingUnit:"剩餘"},printModal:{title:"開始列印",selectPrinter:"選擇印表機",selectPlate:"選擇板",filamentMapping:"耗材對應",totalCost:"總成本：",slotRemainingShort:" - 剩餘 {{grams}}g",printSettings:"列印設定",bedLeveling:"熱床調平",flowCalibration:"流量校準",vibrationCalibration:"振動校準",layerInspection:"首層檢查",timelapse:"縮時攝影",startPrint:"開始列印",addToQueue:"新增到佇列",cancel:"取消",noPrintersAvailable:"無可用印表機",printerBusy:"印表機忙碌",printerOffline:"印表機離線",sameTypeDifferentColor:"相同類型，不同顏色",filamentTypeNotLoaded:"耗材類型未裝載",openCalendar:"開啟日曆",leftNozzle:"左",rightNozzle:"右",leftNozzleTooltip:"左噴嘴",rightNozzleTooltip:"右噴嘴",filamentOverride:"耗材覆蓋",filamentOverrideHint:"可選覆蓋用於基於模型的耗材分配。排程器將使用您選擇的耗材而不是原始 3MF 值進行匹配。",originalFilament:"原始",overrideWith:"覆蓋為",resetToOriginal:"恢復為原始",insufficientFilamentTitle:"耗材不足",insufficientFilamentMessage:"部分已分配料盤的剩餘耗材少於本次列印所需：",insufficientFilamentLine:"{{printer}} - {{slot}}：需要 {{required}}g，剩餘 {{remaining}}g",printAnyway:"仍然列印",forceColorMatch:"強制顏色匹配",staggerPrinterStarts:"錯開印表機啟動",staggerGroupSize:"群組大小",staggerInterval:"間隔（分鐘）",staggerPreview:"{{printers}} 台印表機 → 分成 {{groups}} 組，每組 {{size}} 台，每 {{interval}} 分鐘啟動一組",staggerLastGroup:"最後一組：{{count}}",staggerTotal:"總計：{{minutes}} 分鐘",staggerToPrinters:"分批傳送到 {{count}} 臺印表機",gcodeInjection:"注入自動列印G-code"},backup:{title:"備份與恢復",createBackup:"建立備份",restoreBackup:"恢復備份",restoreDescription:"從備份檔案替換所有資料",downloadBackup:"下載備份",uploadBackup:"上傳備份",lastBackup:"上次備份",autoBackup:"自動備份",backupNow:"立即備份",restoreWarning:"警告：恢復備份將覆蓋所有目前資料。",includeArchives:"包含歸檔",includeSettings:"包含設定",includeProfiles:"包含設定檔案",backupSuccess:"備份建立成功",restoreSuccess:"備份恢復成功",backupFailed:"備份失敗",restoreFailed:"恢復失敗",restoreNote:"恢復期間虛擬印表機將停止",githubBackup:"GitHub 備份",enabled:"已啟用",cloudLoginRequired:"需要登入 Bambu Cloud。請在 設定檔案 → 雲設定檔案 中登入以啟用 GitHub 備份。",cloudLoginRequiredShort:"需要雲端登入",githubDescription:"自動將您的設定檔案同步到私有 GitHub 倉庫以進行備份和版本歷史紀錄。",repositoryUrl:"倉庫 URL",personalAccessToken:"個人存取權杖",tokenSaved:"（已儲存）",enterNewToken:"輸入新權杖以更新",tokenHint:"具有內容讀寫權限的細粒度權杖",branch:"分支",manualOnly:"僅手動",hourly:"每小時",daily:"每天",weekly:"每週",includeInBackup:"包含在備份中",kProfiles:"K 設定檔案",kProfilesDescription:"來自已連線印表機的壓力推進校準",noPrintersConnected:"沒有印表機連線",printersConnected:"{{connected}}/{{total}} 已連線",cloudProfiles:"雲設定檔案",cloudProfilesDescription:"來自 Bambu Cloud 的耗材、印表機和工藝預設",appSettings:"應用程式設定",appSettingsDescription:"Bambuddy 設定（完整資料庫）",spoolInventory:"耗材庫存",spoolInventoryDescription:"耗材卷軸、使用紀錄和成本追蹤",printArchives:"列印檔案",printArchivesDescription:"列印歷史中繼資料（不含 gcode/3MF 檔案）",lastBackupAt:"上次備份：",noBackupsYet:"尚無備份",next:"下次：",startingBackup:"正在啟動備份...",test:"測試",enableBackup:"啟用備份",testConnection:"測試連線",enterRepoUrl:"請輸入倉庫 URL",enterRepoAndToken:"請輸入倉庫 URL 和存取權杖",repoRequired:"倉庫 URL 為必填項",tokenRequired:"存取權杖為必填項",githubBackupEnabled:"GitHub 備份已啟用",tokenUpdated:"權杖已更新",settingsSaved:"設定已儲存",failedToSave:"儲存失敗：{{message}}",backupCompleteFiles:"備份完成 - {{count}} 個檔案已更新",backupSkippedNoChanges:"備份已跳過 - 無更改",backupFailed2:"備份失敗：{{message}}",clearedLogs:"已清除 {{count}} 條日誌",failedToClearLogs:"清除日誌失敗：{{message}}",history:"歷史紀錄",clear:"清除",date:"日期",status:"狀態",commit:"提交",localBackup:"本機備份",localBackupDescription:"建立 Bambuddy 資料的完整備份，包括資料庫、檔案、上傳和所有檔案。",downloadBackupLabel:"下載備份",completeBackupZip:"完整備份：資料庫 + 所有檔案（ZIP）",download:"下載",preparingBackup:"正在準備備份...",creatingArchive:"正在建立備份歸檔...對於大型歸檔可能需要一些時間。",downloadingFile:"正在下載備份檔案...",backupDownloaded:"備份下載成功",failedToCreateBackup:"建立備份失敗：{{message}}",restore:"恢復",restoreReplacesAll:"恢復將替換所有資料。",restoreReplacesAllDetail:"您目前的資料庫和檔案將被完全替換。恢復後需要重新啟動。",restoreConfirmTitle:"恢復備份",restoreConfirmMessage:'您確定要從"{{filename}}"恢復嗎？這將完全替換您目前的資料庫和所有檔案。恢復後需要重新啟動應用程式。',restoreConfirmButton:"恢復備份",uploadingFile:"正在上傳備份檔案...",backupRestoredRestart:"備份已恢復。請重新啟動 Bambuddy。",failedToRestore:"恢復備份失敗。請檢查檔案格式。",reloadNow:"立即重新載入",creatingBackup:"正在建立備份",restoringBackup:"正在恢復備份",preparing:"準備中...",processing:"處理中...",doNotClosePage:"請不要關閉此頁面或離開頁面。對於大型備份，此操作可能需要幾分鐘。",restoring:"恢復中...",restoreComplete:"恢復完成",restoreFailed2:"恢復失敗",importSettings:"從備份檔案匯入設定",pleaseWaitRestoring:"請等待資料恢復中",selectBackupFile:"點選選擇備份檔案（.json 或 .zip）",duplicateHandling:"重複項處理方式：",matchPrinters:"印表機",matchPrintersBy:"按序列號匹配",matchSmartPlugs:"智慧插座",matchSmartPlugsBy:"按 IP 位址匹配",matchNotificationProviders:"通知提供者",matchNotificationProvidersBy:"按名稱匹配",matchFilaments:"耗材",matchFilamentsBy:"按名稱 + 類型 + 品牌匹配",matchArchives:"檔案",matchArchivesBy:"按內容雜湊匹配（始終跳過）",matchPendingUploads:"待上傳",matchPendingUploadsBy:"按檔名匹配",matchSettingsTemplates:"設定和範本",matchSettingsTemplatesBy:"始終覆蓋",replaceExisting:"替換現有資料",keepExisting:"保留現有資料",overwriteDescription:"用備份資料覆蓋已存在的項目",keepDescription:"僅恢復尚不存在的項目",overwriteCaution:"注意：",overwriteWarning:"覆蓋將用備份資料替換您目前的設定。出於安全考慮，印表機存取碼永遠不會被覆蓋。",cancel:"取消",processingBackup:"正在處理備份檔案...",itemsRestored:"已恢復項目",itemsSkipped:"已跳過項目",restored:"已恢復",skippedAlreadyExist:"已跳過（已存在）",filesCategory:"檔案（3MF、縮圖等）",andMore:"...還有 {{count}} 項",newApiKeysGenerated:"已產生新的 API 金鑰",keysShownOnce:"這些金鑰僅顯示一次。請立即複製！",copy:"複製",noDataFound:"在備份檔案中未找到可恢復的資料。",close:"關閉",scheduledBackup:"排程備份",scheduledBackupDescription:"依排程自動建立備份快照。輸出目錄可掛載到 NAS 或外部儲存。",frequency:"頻率",backupTime:"時間",retention:"保留",retentionDescription:"保留的備份數量",outputPath:"輸出路徑",outputPathPlaceholder:"預設：{{path}}",outputPathDescription:"留空以使用預設位置",runNow:"立即執行",backupFiles:"備份檔案",noScheduledBackups:"尚無備份",deleteBackup:"刪除",deleteBackupConfirm:"要刪除此備份檔案嗎？",backupRunning:"備份進行中…",scheduledBackupComplete:"備份已成功完成",scheduledBackupFailed:"備份失敗",nextBackup:"下次備份",backupSize:"大小",utc:"UTC",defaultPathLabel:"預設：",categories:{settings:"設定",notification_providers:"通知提供者",notification_templates:"通知範本",smart_plugs:"智慧插座",printers:"印表機",filaments:"耗材",maintenance_types:"維護類型",archives:"檔案",projects:"專案",pending_uploads:"待上傳",external_links:"外部連結",api_keys:"API 金鑰"}},tags:{title:"標籤",addTag:"新增標籤",editTag:"編輯標籤",deleteTag:"刪除標籤",tagName:"標籤名稱",tagColor:"標籤顏色",noTags:"無標籤",deleteConfirm:"確定要刪除此標籤嗎？",manageTags:"管理標籤"},uploadModal:{title:"上傳 3MF 檔案",dragDrop:"將 .3mf 檔案拖放到此處",or:"或",browseFiles:"瀏覽檔案",extractionInfo:"將從 3MF 檔案中繼資料中自動提取印表機型號。",uploaded:"已上傳",failed:"失敗",uploading:"上傳中...",upload:"上傳",uploadFailed:"上傳失敗"},editArchive:{title:"編輯歸檔",name:"名稱",namePlaceholder:"列印名稱",printer:"印表機",noPrinter:"無印表機",project:"專案",noProject:"無專案",itemsPrinted:"列印數量",itemsPrintedHelp:"此列印任務中生產的物品數量",notes:"備註",notesPlaceholder:"新增關於此列印的備註...",externalLink:"外部連結",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"連結到 Printables、Thingiverse 或其他來源",tags:"標籤",tagsPlaceholder:"新增標籤...",addMoreTags:"新增更多標籤...",matchingTags:'匹配"{{query}}"',existingTags:"現有標籤",clickToAdd:"（點選新增）",status:"狀態",failureReason:"失敗原因",selectReason:"選擇原因...",photos:"列印成品照片",photosHelp:"點選 + 新增列印成品照片",printResult:"列印成品",saving:"儲存中...",failureReasons:{adhesionFailure:"附著力失敗",spaghettiDetached:"拉絲 / 脫落",layerShift:"層偏移",cloggedNozzle:"噴嘴堵塞",filamentRunout:"耗材用完",warping:"翹曲",stringing:"拉絲",underExtrusion:"擠出不足",powerFailure:"斷電",userCancelled:"使用者取消",other:"其他"},statuses:{completed:"已完成",failed:"失敗",aborted:"已取消",printing:"列印中"}},kProfiles:{title:"K 值設定",noPrintersConfigured:"未設定印表機",addPrinterInSettings:"在設定中新增印表機以管理 K 值設定",noActivePrinters:"無活躍印表機",enablePrinterConnection:"啟用印表機連線以檢視其 K 值設定",loadingProfiles:"載入 K 值設定中...",printerOffline:"印表機離線",printerOfflineDesc:"所選印表機未連線。開啟電源以檢視 K 值設定。",noMatchingProfiles:"無匹配的設定",noMatchingProfilesDesc:"沒有設定匹配您的搜尋條件",noKProfiles:"無 K 值設定",noKProfilesDesc:"未找到 {{diameter}}mm 噴嘴的壓力推進設定",createFirstProfile:"建立第一個設定",printer:"印表機",nozzle:"噴嘴",refresh:"重新整理",addProfile:"新增設定",export:"匯出",import:"匯入",select:"選擇",selectAll:"全選",delete:"刪除",searchPlaceholder:"按名稱或耗材搜尋...",allExtruders:"所有擠出機",leftOnly:"僅左側",rightOnly:"僅右側",allFlow:"所有流量",hfOnly:"僅高流量",sOnly:"僅標準",sortName:"排序：名稱",sortKValue:"排序：K 值",sortFilament:"排序：耗材",leftExtruder:"左擠出機",rightExtruder:"右擠出機",modal:{addTitle:"新增 K 值設定",editTitle:"編輯 K 值設定",profileName:"設定名稱",profileNamePlaceholder:"我的 PLA 設定",kValue:"K 值",kValuePlaceholder:"0.020",kValueHelp:"典型範圍：PLA 0.01 - 0.06，PETG 0.02 - 0.10",filament:"耗材",selectFilament:"選擇耗材...",noFilamentsHelp:"未找到耗材。請先在 Bambu Studio 中建立 K 值設定。",flowType:"流量類型",highFlow:"高流量",standard:"標準",nozzleSize:"噴嘴尺寸",extruder:"擠出機",extruders:"擠出機",left:"左",right:"右",notes:"備註（本機儲存）",notesPlaceholder:"新增關於此設定的備註...",notesHelp:"備註儲存在 Bambuddy 中，不在印表機上",syncing:"與印表機同步中...",savingExtruder:"儲存到擠出機 {{current}}/{{total}}...",pleaseWait:"請稍候"},deleteConfirm:{title:"刪除設定",cannotUndo:"此操作無法復原",message:'確定要從印表機刪除"{{name}}"嗎？'},bulkDelete:{title:"刪除設定",cannotUndo:"此操作無法復原",message:"確定要從印表機刪除 {{count}} 個選中的設定嗎？"},toast:{profileSaved:"K 值設定已儲存",profilesSaved:"K 值設定已儲存到 {{count}} 個擠出機",selectAtLeastOneExtruder:"請至少選擇一個擠出機",profileDeleted:"K 值設定已刪除",profilesDeleted:"已刪除 {{count}} 個設定",exportedProfiles:"已匯出 {{count}} 個設定",importedProfiles:"已匯入 {{count}} / {{total}} 個設定",noProfilesToExport:"無可匯出的設定",invalidFileFormat:"無效的檔案格式",failedToParseImport:"解析匯入檔案失敗",failedToSaveBatch:"批次儲存 K 值設定失敗",noteSaved:"備註已儲存",failedToSaveNote:"儲存備註失敗"},permission:{noRead:"您沒有重新整理設定的權限",noCreate:"您沒有新增設定的權限",noUpdate:"您沒有更新 K 值設定的權限",noDelete:"您沒有刪除 K 值設定的權限",noExport:"您沒有匯出設定的權限",noImport:"您沒有匯入設定的權限"}},virtualPrinter:{title:"虛擬印表機",running:"執行中",stopped:"已停止",description:{default:"啟用虛擬印表機，使其在 Bambu Studio 和 OrcaSlicer 中可見。傳送到此印表機的檔案將直接歸檔而不列印。",proxy:"啟用代理，將切片軟體流量中繼到真實印表機，允許在任何網路上遠端列印。"},enable:{title:"啟用虛擬印表機",visibleInSlicer:'在切片軟體發現中顯示為"Bambuddy"',proxyingTo:"代理到 {{name}}",notActive:"未啟用"},model:{title:"印表機型號",description:"選擇要模擬的印表機型號。",restartWarning:"更改型號將重新啟動虛擬印表機"},accessCode:{title:"存取碼",isSet:"存取碼已設定",notSet:"未設定存取碼 - 需要設定才能啟用",placeholder:"輸入 8 位字元程式碼",placeholderChange:"輸入新程式碼以更改",hint:"必須恰好 8 個字元。切片軟體使用此程式碼進行認證。",charCount:"({{count}}/8)"},targetPrinter:{title:"目標印表機",configured:"代理目標已設定",notConfigured:"未選擇目標印表機 - 代理模式需要設定",placeholder:"選擇印表機...",hint:"選擇要將切片軟體流量代理到的印表機。印表機必須處於區域網路模式。",noPrinters:"未設定印表機。請先新增印表機以使用代理模式。"},remoteInterface:{title:"網路介面覆蓋",configured:"介面覆蓋已啟用",optional:"可選 - 當自動檢測的 IP 不正確時使用（例如多網路卡、Docker、VPN）",placeholder:"自動檢測（預設）...",hint:"覆蓋透過 SSDP 廣播並在 TLS 憑證中使用的 IP 位址。在 Bambuddy 有多個網路介面時很有用。"},mode:{title:"模式",archive:"歸檔",archiveDesc:"立即歸檔檔案",review:"審核",reviewDesc:"歸檔前審核",queue:"佇列",queueDesc:"歸檔並新增到佇列",proxy:"代理",proxyDesc:"中繼到真實印表機"},autoDispatch:{title:"自動派發",description:"新增到佇列時自動開始列印。關閉後，列印任務等待手動派發。"},tailscaleDisabled:{title:"Tailscale 整合",description:"啟用後，使用 Tailscale 取得受信任的 TLS 憑證。停用則僅使用自簽憑證。"},setupRequired:{title:"需要設定",description:"虛擬印表機功能需要額外的系統設定才能工作。包括埠轉發、防火牆規則和平臺特定設定。",readGuide:"啟用前請閱讀設定指南"},archiveNameSource:{title:"存檔名稱來源",description:'選擇透過虛擬印表機接收檔案時新存檔的命名方式。"元資料"使用 3MF 中嵌入的切片標題（預設）。"檔名"使用 Bambu Studio 透過 FTP 傳送的檔案名稱 — 當您在"傳送到印表機"對話方塊中重新命名工作時非常有用。',metadata:"元資料",filename:"檔名"},howItWorks:{title:"工作原理",step1:"在同一區域網路中，虛擬印表機會透過發現機制自動出現在您的切片軟體（Bambu Studio / OrcaSlicer）中。從其他網路，透過 IP 位址和存取碼手動新增。",step2:'在歸檔、審核和佇列模式下，使用切片軟體中的"傳送"按鈕將 3MF 檔案上傳到 Bambuddy。切片軟體會顯示"列印成功"— 檔案已儲存，未列印。',step3:"在代理模式下，虛擬印表機將所有流量中繼到真實印表機 — 列印會立即開始，就像直接連線一樣。"},status:{title:"狀態詳情",printerName:"印表機名稱",model:"型號",serialNumber:"序列號",mode:"模式",pendingFiles:"待處理檔案",targetPrinter:"目標印表機",ftpPort:"FTP 連接埠",mqttPort:"MQTT 連接埠",ftpConnections:"FTP 連線",mqttConnections:"MQTT 連線"},toast:{updated:"虛擬印表機設定已更新",failedToUpdate:"更新設定失敗",tailscaleNotAvailable:"此主機上未安裝 Tailscale。請先安裝 Tailscale，然後重試。",copyFailed:"複製失敗 — 請手動選取文字",accessCodeRequired:"請先設定存取碼",targetPrinterRequired:"請先選擇目標印表機",bindIpRequired:"請先設定繫結 IP",accessCodeEmpty:"存取碼不能為空",accessCodeLength:"存取碼必須恰好 8 個字元",created:"虛擬印表機已建立",failedToCreate:"建立虛擬印表機失敗",deleted:"虛擬印表機已刪除",failedToDelete:"刪除虛擬印表機失敗"},list:{title:"虛擬印表機",add:"新增",addFirst:"新增虛擬印表機",empty:"未設定虛擬印表機。新增一個以開始使用。"},bindIp:{title:"繫結介面",placeholder:"選擇介面...",hint:"此虛擬印表機繫結的網路介面。每臺印表機必須唯一。"},proxy:{accessCodeHint:"在代理模式下，在切片軟體中使用目標印表機的存取碼。連線會透明轉發到真實印表機。"},addDialog:{title:"新增虛擬印表機",name:"名稱",hint:"建立後可以設定存取碼、目標印表機和其他設定。",create:"建立"},deleteConfirm:{title:"刪除虛擬印表機",message:'確定要刪除"{{name}}"嗎？這將停止此印表機的所有服務。'}},modelViewer:{openInSlicer:"在切片軟體中開啟",tabs:{model:"3D 模型",gcode:"G-code 預覽"},notAvailable:"不可用",notSliced:"未切片",plates:"板",allPlates:"所有板",plateNumber:"板 {{number}}",plateCount:"{{count}} 個板",plateCount_other:"{{count}} 個板",objectCount:"{{count}} 個物件",objectCount_other:"{{count}} 個物件",filamentCount:"{{count}} 種耗材",filamentCount_other:"{{count}} 種耗材",eta:"預計 {{minutes}} 分鐘",noPreview:"此檔案無可用預覽",pagination:{pageOf:"第 {{current}} / {{total}} 頁",prev:"上一頁",next:"下一頁"},errors:{failedToLoad:"載入檔案失敗",noMeshes:"3MF 檔案中未找到網格",unsupportedFormat:"不支援的檔案格式"}},maintenanceDescriptions:{lubricateCarbonRods:"在碳纖維杆上塗抹潤滑劑以確保順暢運動",lubricateRails:"在線性導軌上塗抹潤滑劑以確保順暢運動",cleanNozzle:"清潔熱端和噴嘴以防止堵塞",checkBelts:"檢查皮帶張力以確保列印精度",cleanBuildPlate:"清潔列印板以獲得更好的附著力",checkExtruder:"檢查擠出機齒輪磨損情況",checkCooling:"確保冷卻風扇正常工作",generalInspection:"印表機綜合檢查",cleanCarbonRods:"清潔碳纖維杆以減少摩擦",lubricateSteelRods:"在鋼杆上塗抹潤滑劑以確保順暢運動",cleanSteelRods:"清潔鋼杆以減少摩擦",cleanLinearRails:"擦拭線性導軌以清除灰塵和碎屑",checkPtfeTube:"檢查 PTFE 管的磨損或損壞",replaceHepaFilter:"更換 HEPA 過濾器以保證空氣品質",replaceCarbonFilter:"更換活性炭過濾器",lubricateLeftNozzleRail:"潤滑左噴嘴導軌（H2 系列）"},smartPlugs:{offline:"離線",admin:"管理",openPlugAdminPage:"開啟插座管理頁面",deleteSmartPlug:"刪除智慧插座",turnOnSmartPlug:"開啟智慧插座",turnOffSmartPlug:"關閉智慧插座",turnOn:"開啟",turnOff:"關閉",addSmartPlug:{scanningNetwork:"掃描網路中...",chooseEntity:"選擇實體...",connectionFailed:"連線失敗",searchEntities:"搜尋實體...",searchPowerSensors:"搜尋功率感測器...",searchEnergySensors:"搜尋能量感測器...",placeholders:{plugName:"客廳插座",mqttStateOnValue:"ON、true、1",mqttSameAsPower:"與功率主題相同，或不同"}},linkedTo:"連結到：",monitorOnly:"僅監控",alerts:"警報",scheduleOn:"開啟 {{time}}",scheduleOff:"關閉 {{time}}",on:"開啟",off:"關閉",power:"功率",kwhToday:"今日kWh",settings:"設定",automationSettings:"自動化設定",showInSwitchbar:"在開關欄顯示",quickAccessSidebar:"從側邊欄快速存取",enabled:"已啟用",enableAutomation:"為此插座啟用自動化",autoOn:"自動開啟",autoOnDescription:"列印開始時開啟",autoOff:"自動關閉",autoOffDescription:"列印完成時關閉（一次性）",autoOffPersistent:"保持啟用",autoOffPersistentDescription:"在列印之間保持啟用而非一次性",turnOffDelayMode:"關閉延遲模式",time:"時間",temp:"溫度",delayMinutes:"延遲（分鐘）",tempThreshold:"溫度閾值（°C）",tempThresholdDescription:"當噴嘴冷卻到此溫度以下時關閉",edit:"編輯",deleteConfirm:'確定要刪除"{{name}}"嗎？此操作無法復原。',turnOnConfirm:'確定要開啟"{{name}}"嗎？',turnOffConfirm:'確定要關閉"{{name}}"嗎？這將切斷連線裝置的電源。',failedToTurn:'無法{{action}}"{{name}}"',unknown:"未知",addTitle:"新增智慧插座",editTitle:"編輯智慧插座",stopScanning:"停止掃描",discoverTasmota:"發現Tasmota裝置",foundDevices:"找到{{count}}個裝置 - 點選選擇：",noDevicesFound:"未在您的網路中找到Tasmota裝置",haNotConfigured:"Home Assistant未設定。請在以下位置設定",haSettingsPath:"設定 → 網路 → Home Assistant",selectEntity:"選擇實體 *",ipAddress:"IP 位址 *",nameLabel:"名稱 *",username:"使用者名稱",password:"密碼",authHint:"如果您的Tasmota裝置不需要認證，請留空",linkToPrinter:"連結印表機",noPrinter:"無印表機（僅手動控制）",linkingDescription:"連結後可在列印開始/完成時自動開關",powerAlerts:"功率警報",alertAbove:"高於時警報（W）",alertBelow:"低於時警報（W）",alertDescription:"當電力消耗超過這些閾值時收到通知。留空以停用該方向。",dailySchedule:"每日計畫",turnOnAt:"開啟時間",turnOffAt:"關閉時間",scheduleDescription:"每天在這些時間自動開關插座。留空以跳過該操作。",showOnPrinterCard:"在印表機卡片上顯示",displayOnPrinterCard:"在印表機卡片上顯示按鈕",connectedResult:"已連線！",deviceLabel:"裝置：{{name}} - ",stateLabel:"狀態：{{state}}",test:"測試",delete:"刪除",save:"儲存",add:"新增",cancel:"取消",failedToStartScan:"無法開始掃描",nameRequired:"名稱為必填項",entityRequired:"Home Assistant插座需要實體",mqttTopicRequired:"必須為功率、能源或狀態監控設定至少一個MQTT主題",loadingEntities:"正在載入實體...",loading:"載入中...",failedToLoadEntities:"載入實體失敗：{{error}}",noEntitiesMatching:'未找到匹配"{{search}}"的實體',noEntitiesAvailable:"無可用實體",searchingEntities:"搜尋所有實體（找到{{count}}個）",showingEntities:"顯示 switch、light、input_boolean（{{count}}個可用）",energyMonitoringOptional:"能源監控（可選）",energyMonitoringHint:"搜尋並選擇提供功率/能源資料的感測器。",powerSensorW:"功率感測器（W）",energyTodayKwh:"今日能源（kWh）",totalEnergyKwh:"總能源（kWh）",noMatchingSensors:"無匹配的感測器",none:"無",mqttNotConfigured:"MQTT代理未設定。請在以下位置設定代理地址",mqttSettingsPath:"設定 → 網路 → MQTT發布",mqttNotConfiguredSuffix:"（您不需要啟用發布，只需填寫代理詳細資訊）。",mqttMonitorOnlyDescription:"MQTT插座透過MQTT訂閱接收功率/能源資料。開關控制不可用 - 請使用您的MQTT代理或家庭自動化系統。",powerMonitoring:"功率監控",energyMonitoring:"能源監控",stateMonitoring:"狀態監控",optional:"可選",topic:"主題",jsonPath:"JSON路徑",multiplier:"乘數",onValue:"ON值",mqttPowerHint:`JSON路徑從JSON負載中提取值（例如"power_l1"）。如果主題發布原始數值，請留空。
+ON值：表示"ON"的确切字符串。留空以自动检测（ON、true、1）。`,restControl:"Control",restOnUrl:"Turn ON URL",restOffUrl:"Turn OFF URL",restOnBody:"ON Request Body",restOffBody:"OFF Request Body",restMethod:"HTTP Method",restHeaders:"Custom Headers (JSON)",restStatusUrl:"Status URL",restStatusPath:"State JSON Path",restStatusOnValue:"ON Value",restPowerUrl:"功率URL",restPowerPath:"Power JSON Path",restPowerMultiplier:"功率乘数",restEnergyUrl:"能耗URL",restEnergyPath:"Energy JSON Path",restEnergyMultiplier:"能耗乘数",restUrlRequired:"At least one URL (ON or OFF) is required for REST plugs",restHeadersHint:'e.g. {"Authorization": "Bearer your-token"}',restBodyHint:'e.g. ON, {"state": "on"}',restStatusHint:"URL to poll for current state",restPathHint:"e.g. state or data.power.status",restPowerUrlHint:"功率数据的独立URL（留空则使用状态URL）",restEnergyUrlHint:"能耗数据的独立URL（留空则使用状态URL）",restEnergyHint:"每个值可以使用独立的URL，或回退到状态URL。使用乘数进行单位转换（例如：0.001 将 Wh 转换为 kWh）。",testConnection:"Test Connection",connectionSuccess:"Connection successful",noSwitchesInSwitchbar:"开关栏中没有开关",enableSwitchbarHint:'在设置 > 智能插座中启用"在开关栏显示"'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"电子邮件",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP 电子邮件通知",telegram:"通过 Telegram 机器人发送通知",discord:"通过 Webhook 发送到 Discord 频道",ntfy:"免费、可自托管的推送通知",pushover:"简单、可靠的推送通知",callmebot:"通过 CallMeBot 免费发送 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL",homeassistant:"Home Assistant 仪表板中的持久通知"},lastSuccess:"上次：{{date}}",error:"错误",printer:"打印机：",allPrinters:"所有打印机",sendTestNotification:"发送测试通知",eventSettings:"事件设置",enabled:"已启用",sendFromProvider:"从此提供商发送通知",printEvents:"打印事件",printerStatus:"打印机状态",amsAlarms:"AMS 警报",amsHtAlarms:"AMS-HT 警报",printQueue:"打印队列",start:"开始",plateCheck:"热床检测",complete:"完成",failed:"失败",stopped:"已停止",progress:"进度",offline:"离线",lowFilament:"耗材不足",maintenance:"维护",amsHumidity:"AMS 湿度",amsTemp:"AMS 温度",amsHtHumidity:"AMS-HT 湿度",amsHtTemp:"AMS-HT 温度",bedCooled:"热床已冷却",firstLayer:"首层完成",quiet:"免打扰",digest:"摘要 {{time}}",printStarted:"打印已开始",plateNotEmpty:"热床非空",plateNotEmptyDescription:"打印前检测到物体",printCompleted:"打印已完成",bedCooledLabel:"热床已冷却",bedCooledDescription:"打印后热床温度降至阈值以下",firstLayerCompleteLabel:"首层打印完成",firstLayerCompleteDescription:"首层完成时发送带照片的通知",missingSpoolAssignmentLabel:"缺少料卷分配",missingSpoolAssignmentDescription:"当打印开始且所需料盘没有分配料卷时发送通知",printFailed:"打印失败",printStopped:"打印已停止",progressMilestones:"进度里程碑",progressMilestonesDescription:"在 25%、50%、75% 时通知",printerOffline:"打印机离线",printerError:"打印机错误",lowFilamentLabel:"耗材不足",maintenanceDue:"需要维护",maintenanceDueDescription:"需要维护时通知",amsHumidityHigh:"AMS 湿度过高",amsHumidityHighDescription:"普通 AMS 湿度超过阈值",amsTemperatureHigh:"AMS 温度过高",amsTemperatureHighDescription:"普通 AMS 温度超过阈值",amsHtHumidityHigh:"AMS-HT 湿度过高",amsHtHumidityHighDescription:"AMS-HT 湿度超过阈值",amsHtTemperatureHigh:"AMS-HT 温度过高",amsHtTemperatureHighDescription:"AMS-HT 温度超过阈值",jobAdded:"任务已添加",jobAddedDescription:"任务已添加到队列",jobAssigned:"任务已分配",jobAssignedDescription:"基于模型的任务已分配给打印机",jobStarted:"任务已开始",jobStartedDescription:"队列任务已开始打印",jobWaiting:"任务等待中",jobWaitingDescription:"任务正在等待耗材或打印机",jobSkipped:"任务已跳过",jobSkippedDescription:"任务已跳过（上一个失败）",jobFailed:"任务失败",jobFailedDescription:"任务启动失败",queueComplete:"队列已完成",queueCompleteDescription:"所有队列任务已完成",quietHours:"免打扰时段",noNotificationsDuring:"在此时段内不发送通知",editProviderToChangeQuietHours:"编辑提供商以更改免打扰时段",dailyDigest:"每日摘要",batchNotifications:"将通知汇总为每日摘要",sendAt:"发送于 {{time}}",editProviderToChangeDigestTime:"编辑提供商以更改摘要时间",edit:"编辑",deleteProvider:"删除通知提供商",deleteConfirm:'确定要删除"{{name}}"吗？此操作无法撤销。',delete:"删除",addTitle:"添加通知提供商",editTitle:"编辑通知提供商",nameLabel:"名称 *",namePlaceholder:"我的通知",providerTypeLabel:"提供商类型 *",configuration:"配置",testConfiguration:"测试配置",printerFilter:"打印机筛选",onlyFromPrinter:"仅发送来自此打印机的事件通知",quietHoursDnd:"免打扰时段",quietStart:"开始",quietEnd:"结束",dailyDigestLabel:"每日摘要",sendDigestAt:"发送摘要于",digestCollected:"事件将被收集并在此时间作为单条摘要发送",notificationEvents:"通知事件",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（打印完成后）",eventPriority:{sectionTitle:"ntfy 优先级",helpNtfy:"为每个已启用的事件选择优先级。ntfy 使用它来升级提醒（声音、可见性、推送行为）。此处未设置的级别将使用 ntfy 服务器默认值。",min:"最低",low:"低",default:"默认",high:"高",urgent:"紧急"},cancel:"取消",save:"保存",add:"添加",nameRequired:"名称为必填项",fieldRequired:"{{field}}为必填项",phoneNumber:"电话号码",apiKey:"API 密钥",serverUrl:"服务器 URL",topic:"主题",authToken:"认证令牌",userKey:"用户密钥",appToken:"应用令牌",priority:"优先级",botToken:"机器人令牌",chatId:"聊天 ID",smtpServer:"SMTP 服务器",smtpPort:"SMTP 端口",security:"安全",authentication:"认证",username:"用户名",password:"密码",fromEmail:"发件人邮箱",toEmail:"收件人邮箱",webhookUrl:"Webhook URL",payloadFormat:"负载格式",authorization:"授权",titleFieldName:"标题字段名",messageFieldName:"消息字段名",editTemplate:"编辑模板：{{name}}",titleLabel:"标题",bodyLabel:"正文",titlePlaceholder:"通知标题...",bodyPlaceholder:"通知正文...",availableVariables:"可用变量",clickToInsert:"点击插入到正文光标位置",livePreview:"实时预览",hide:"隐藏",show:"显示",loadingPreview:"加载预览中...",enterTemplateContent:"输入模板内容以查看预览",titlePreview:"标题：",bodyPreview:"正文：",resetToDefault:"恢复默认",titleRequired:"标题为必填项",bodyRequired:"正文为必填项",notificationLog:"通知日志",showFailedOnly:"仅显示失败",last24Hours:"最近 24 小时",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",justNow:"刚刚",noFailedNotifications:"没有失败的通知",noNotificationsLogged:"没有通知记录",unknownProvider:"未知提供商",logTitle:"标题",logMessage:"消息",logError:"错误",logProvider:"提供商：{{type}}",logTime:"时间：{{time}}",refresh:"刷新",clearOld:"清除旧记录",statsSummary:"最近 {{days}} 天：",statsNotifications:"条通知",statsSent:"{{count}} 条已发送",statsFailed:"{{count}} 条失败",eventTypes:{print_start:"打印已开始",print_complete:"打印完成",print_failed:"打印失败",print_stopped:"打印已停止",print_progress:"进度",printer_offline:"打印机离线",printer_error:"打印机错误",filament_low:"耗材不足",maintenance_due:"需要维护",test:"测试"},userEmail:{title:"通知",emailNotifications:"邮件通知",emailNotificationsDesc:"接收您自己打印任务的邮件通知。邮件将通过高级身份验证中配置的 SMTP 设置发送。",sendingTo:"通知将发送至",noEmailWarning:"您的账户没有邮件地址。请联系管理员添加。",printJobNotifications:"打印任务通知",printJobNotificationsDesc:"选择哪些事件会触发您提交的打印任务的邮件通知。",printJobStarts:"打印任务开始",printJobStartsDesc:"当您的打印任务开始时收到通知。",printJobFinishes:"打印任务完成",printJobFinishesDesc:"当您的打印任务成功完成时收到通知。",printErrors:"打印错误",printErrorsDesc:"当您的打印任务失败或遇到错误时收到通知。",printJobStops:"打印任务停止",printJobStopsDesc:"当您的打印任务被取消或停止时收到通知。",saveSuccess:"通知偏好设置已保存。",saveError:"保存通知偏好设置失败。"}},richTextEditor:{bold:"粗体",italic:"斜体",underline:"下划线",bulletList:"无序列表",numberedList:"有序列表",alignLeft:"左对齐",alignCenter:"居中对齐",alignRight:"右对齐",addLink:"添加链接",removeLink:"移除链接"},externalLinks:{noLinksConfigured:"未配置外部链接",deleteLink:"删除链接",removeCustomIcon:"移除自定义图标",openInNewTab:"在新标签页中打开",placeholders:{linkName:"我的链接"}},keyboardShortcuts:{title:"键盘快捷键",navigation:"导航",archivesSection:"归档",kProfilesSection:"K 值配置",generalSection:"通用",shortcuts:{goToPrinters:"前往打印机",goToArchives:"前往归档",goToQueue:"前往队列",goToStats:"前往统计",goToProfiles:"前往云端配置",goToSettings:"前往设置",focusSearch:"聚焦搜索",openUploadModal:"打开上传对话框",clearSelection:"清除选择 / 取消焦点",contextMenu:"卡片右键菜单",refreshProfiles:"刷新配置",newProfile:"新建配置",exitSelectionMode:"退出选择模式",showHelp:"显示此帮助"},footer:"按 Esc 或点击外部关闭"},notificationLog:{title:"通知日志",events:{printStarted:"打印开始",printComplete:"打印完成",printFailed:"打印失败",printStopped:"打印停止",progress:"进度",printerOffline:"打印机离线",printerError:"打印机错误",lowFilament:"耗材不足",maintenanceDue:"维护到期",test:"测试"},timeAgo:{justNow:"刚刚",minutesAgo:"{{minutes}} 分钟前",hoursAgo:"{{hours}} 小时前"}},restoreBackup:{title:"恢复备份",restoring:"恢复中...",restoreComplete:"恢复完成",restoreFailed:"恢复失败",importSettings:"从备份文件导入设置",pleaseWait:"请稍候，正在恢复您的数据",clickToSelect:"点击选择备份文件（.json 或 .zip）",howDuplicateHandling:"重复处理方式：",categories:{printers:"打印机",smartPlugs:"智能插座",notificationProviders:"通知提供商",filaments:"耗材",archives:"归档",pendingUploads:"待处理上传",settingsTemplates:"设置和模板"},matchingInfo:{printers:"按序列号匹配",smartPlugs:"按 IP 地址匹配",notificationProviders:"按名称匹配",filaments:"按名称 + 类型 + 品牌匹配",archives:"按内容哈希匹配",pendingUploads:"按文件名匹配",settingsTemplates:"始终覆盖"},replaceExisting:"替换现有数据",keepExisting:"保留现有数据",replaceDescription:"用备份数据覆盖已存在的项目",keepDescription:"仅恢复不存在的项目",caution:"注意：",cautionText:"覆盖将用备份数据替换您当前的配置。出于安全考虑，打印机访问码永远不会被覆盖。",itemsRestored:"已恢复项目",itemsSkipped:"已跳过项目",restored:"已恢复",skipped:"已跳过（已存在）",filesLabel:"文件（3MF、缩略图等）",newApiKeysGenerated:"已生成新 API 密钥",newApiKeysWarning:"这些密钥仅显示一次。请立即复制！",processingBackup:"处理备份文件中...",noDataFound:"备份文件中未找到可恢复的数据。",failedToRestore:"恢复备份失败。请检查文件格式。"},backupExport:{title:"导出备份",selectData:"选择要包含的数据",selectAll:"全选",selectNone:"全不选",categoryDescriptions:{settings:"语言、主题、更新偏好",notifications:"ntfy、Pushover、Discord 等",templates:"自定义消息模板",smartPlugs:"Tasmota 插座配置",externalLinks:"侧边栏外部服务链接",printers:"打印机信息（不含访问码）",plateDetection:"空打印板参考图像",filaments:"耗材类型和成本",maintenance:"自定义维护计划",archives:"所有打印数据 + 文件（3MF、缩略图、照片）",projects:"项目、材料清单和附件",pendingUploads:"虚拟打印机待审核的上传",apiKeys:"Webhook API 密钥（导入时生成新密钥）"},requiresPrinters:"需要选择打印机",zipFileWarning:"将创建 ZIP 文件。",zipFileDescription:"包括所有 3MF 文件、缩略图、延时摄影和照片。这可能需要一些时间并生成较大的文件。",includeAccessCodes:"包含访问码",includeAccessCodesDescription:"用于转移到另一台机器",includeAccessCodesWarning:"访问码将以明文形式包含。请妥善保管此备份文件！",categoriesSelected:"已选择 {{selectedCount}} 个类别"},pendingUploads:{placeholders:{notes:"添加关于此打印的备注..."},discardUpload:"丢弃上传",archiveAllUploads:"归档所有上传",discardAllUploads:"丢弃所有上传",archive:"归档",timeAgo:{justNow:"刚刚",minutesAgo:"{{minutes}} 分钟前",hoursAgo:"{{hours}} 小时前",daysAgo:"{{days}} 天前"}},apiBrowser:{placeholders:{requestBody:"JSON 请求体...",searchEndpoints:"搜索端点..."}},configureAmsSlot:{title:"配置 AMS 槽位",slotConfigured:"槽位已配置！",configuringSlot:"正在配置槽位：",slotLabel:"{{ams}} 槽位 {{slot}}",searchPresets:"搜索预设...",colorPlaceholder:"颜色名称或十六进制（例如：棕色、FF8800）",clearCustomColor:"清除自定义颜色",noCloudPresets:"无云端预设。登录拓竹云以同步。",noPresetsAvailable:"无可用预设。登录拓竹云或导入本地配置。",noMatchingPresets:"未找到匹配的预设。",custom:"自定义",builtin:"内置",settingsSentToPrinter:"设置已发送到打印机",filamentProfile:"耗材配置",kProfileLabel:"K 值配置（压力推进）",filteringFor:"筛选：{{material}}",noKProfile:"无 K 值配置（使用默认值 0.020）",noMatchingKProfiles:"未找到匹配的 K 值配置。将使用默认 K=0.020。",selectFilamentFirst:"请先选择耗材配置",kFromCalibration:"K={{value}}（来自打印机校准）",customColorLabel:"自定义颜色（可选）",presetColors:"{{name}} 颜色：",showLessColors:"显示更少颜色",showMoreColors:"显示更多颜色",clear:"清除",hexLabel:"十六进制：#{{hex}}",resetting:"重置中...",resetSlot:"重置槽位",cancel:"取消",configuring:"配置中...",configureSlot:"配置槽位"},githubBackup:{title:"GitHub 备份",history:"历史",downloadBackup:"下载备份",restoreBackup:"恢复备份",noBackupsYet:"暂无备份"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"搜索标签...",renameTag:"重命名标签",deleteTag:"删除标签"},notificationTemplates:{placeholders:{title:"通知标题...",body:"通知正文..."}},batchTag:{placeholders:{newTag:"输入新标签..."}},photoGallery:{deletePhoto:"删除照片"},filamentHoverCard:{copySpoolUuid:"复制耗材 UUID"},kProfilesView:{hasNote:"有备注",copyProfile:"复制配置"},layout:{openMenu:"打开菜单",noPermissionSystemInfo:"您没有查看系统信息的权限"},dashboard:{dragToReorder:"拖动以重新排列",hideWidget:"隐藏小部件"},notificationProviderCard:{deleteNotificationProvider:"删除通知提供商"},fileManagerModal:{closeFileManager:"关闭文件管理器",sortFiles:"排序文件",goToParentFolder:"返回上级文件夹",threeView:"3D 视图"},embeddedCameraViewer:{refreshStream:"刷新流",close:"关闭",zoomOut:"缩小",resetZoom:"重置缩放",zoomIn:"放大",dragToResize:"拖动调整大小"},timelapseViewer:{skipBack5s:"后退 5 秒",skipForward5s:"前进 5 秒"},notificationProviders:{descriptions:{email:"SMTP 邮件通知",telegram:"通过 Telegram 机器人通知",discord:"通过 Webhook 发送到 Discord 频道",ntfy:"免费、可自托管的推送通知",pushover:"简单、可靠的推送通知",callmebot:"通过 CallMeBot 的免费 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL"}},logViewer:{searchPlaceholder:"搜索消息或日志名称...",noLogEntries:"未找到日志条目"},switchbarPopover:{noSwitchesInSwitchbar:"切换栏中没有开关"},projectPageModal:{placeholders:{title:"标题",designer:"设计师",license:"许可证",description:"输入描述...",profileTitle:"配置标题",profileDescription:"配置描述..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"等待中",justNow:"刚刚",now:"现在",minsAgo:"{{count}} 分钟前",inMins:"{{count}} 分钟后",hoursAgo:"{{count}} 小时前",inHours:"{{count}} 小时后",daysAgo:"{{count}} 天前",inDays:"{{count}} 天后"},spoolbuddy:{nav:{dashboard:"仪表板",ams:"AMS",inventory:"库存",writeTag:"写入",settings:"设置"},status:{nfcReady:"NFC 就绪",nfcOff:"NFC 关闭",offline:"离线",online:"在线",noPrinters:"无打印机",deviceOffline:"设备离线",waitingConnection:"等待设备连接...",systemReady:"系统就绪",status:"状态"},dashboard:{readyToScan:"准备扫描",idleMessage:"将耗材放在秤上以识别",nfcHint:"NFC 标签将自动读取",device:"设备",syncWeight:"同步重量",weightSynced:"已同步！",unknownTag:"未知标签",newTag:"检测到新标签",onScale:"在秤上",linkSpool:"链接到耗材",linkTagTitle:"将标签链接到耗材",linkTag:"链接标签",selectSpool:"选择要链接此标签的耗材：",noUntagged:"未找到没有标签的耗材",tagDetected:"检测到标签",noTag:"无标签",tagId:"标签",grossWeight:"毛重",spoolSize:"耗材盘尺寸",close:"关闭",currentSpool:"当前耗材",plateReady:"热床就绪: {{name}}",plateReadyLabel:"待清理的热床",plateClearAction:"清理",plateClearedToast:"已将热床标记为已清理",plateClearFailed:"无法将热床标记为已清理"},modal:{spoolDetected:"检测到耗材",assignToAms:"分配到 AMS",syncWeight:"同步重量",weightSynced:"已同步！",syncing:"同步中...",newTagDetected:"检测到新标签",addToInventory:"添加到库存",assignToAmsTitle:"分配到 AMS",selectSlot:"选择槽位",assign:"分配",assigning:"分配中...",assignSuccess:"已分配！",assignError:"分配耗材失败。请重试。",noPrinterSelected:"选择打印机...",noAmsDetected:"此打印机未检测到 AMS",slot:"槽位"},weight:{noReading:"无读数",stable:"稳定",measuring:"测量中...",tare:"去皮",calibrate:"校准"},spool:{remaining:"剩余",material:"材料",brand:"品牌",color:"颜色",coreWeight:"空盘",labelWeight:"标签",scaleWeight:"秤重",netWeight:"净重",lastUsed:"上次使用"},ams:{noData:"未检测到 AMS",connectAms:"连接 AMS 以查看耗材槽位",noPrinter:"未选择打印机",selectPrinter:"从顶部栏选择打印机",printerDisconnected:"打印机已断开",humidity:"湿度",level:"余量",active:"活跃",slot:"槽位",empty:"空"},inventory:{search:"搜索耗材...",empty:"库存中没有耗材",noResults:"没有匹配的耗材",spools:"个耗材",addSpool:"添加耗材"},settings:{tabDevice:"设备",tabDisplay:"显示",tabScale:"秤",tabUpdates:"更新",nfcReader:"NFC 读卡器",type:"类型",connection:"连接",notConnected:"不适用",deviceInfo:"设备信息",hostname:"主机",uptime:"运行时间",systemConfig:"后端与认证",backendUrl:"Bambuddy 后端 URL",apiToken:"API 令牌",apiTokenPlaceholder:"输入 API 令牌",saveConfig:"保存配置",systemQueued:"配置已加入队列。",nfcDiagnostic:"NFC 诊断",scaleDiagnostic:"秤诊断",readTagDiagnostic:"读取标签诊断",testNfc:"测试读卡器",testScale:"测试精度",testReadTag:"读取标签",systemFieldsRequired:"后端 URL 为必填项。",brightness:"亮度",saved:"已保存",noBacklight:"未检测到 DSI 背光。亮度控制需要 DSI 显示屏。",screenBlank:"屏幕熄灭超时",screenBlankDesc:"不活动后屏幕关闭。触摸唤醒。",displayNote:"亮度作为软件滤镜应用。",scaleCalibration:"秤校准",currentWeight:"当前重量",tareOffset:"去皮",calFactor:"系数",knownWeight:"已知重量",calStep1:"移除秤上所有物品并按设置零点。",calStep2:"将已知重量放在秤上。",setZero:"设置零点",calibrateNow:"校准",calibrated:"已校准",tareSet:"去皮命令已发送。等待设备响应...",tareFailed:"发送去皮命令失败",zeroSet:"零点已设置。将已知重量放在秤上。",calibrationDone:"校准完成！",calibrationFailed:"校准失败",lastCalibrated:"上次校准",stable:"稳定",settling:"稳定中...",firmware:"固件",scale:"秤",noDevice:"未找到 SpoolBuddy 设备",daemonVersion:"守护进程版本",currentVersion:"当前",versionPending:"等待守护进程...",checking:"检查中...",checkUpdates:"检查更新",updateAvailable:"有可用更新",updateInstructions:"通过 SSH 更新：运行 SpoolBuddy 安装脚本进行升级。",upToDate:"已是最新",includeBeta:"包含测试版本"},writeTag:{tabExisting:"现有耗材",tabNew:"新耗材",tabReplace:"替换标签",searchPlaceholder:"按材料、颜色、品牌搜索...",noUntaggedSpools:"没有无标签的耗材",noTaggedSpools:"没有有标签的耗材",selectSpool:"选择一个耗材，然后将空白 NTAG 放在读卡器上",placeTag:"将 NTAG 放在读卡器上",tagReady:"检测到标签 — 准备写入",writeTag:"写入标签",replaceTag:"替换标签",writing:"写入标签中...",waiting:"等待 SpoolBuddy...",writeSuccess:"标签写入成功！",writeFailed:"写入失败",queueFailed:"排队写入命令失败",tryAgain:"重试",cancel:"取消",replaceWarning:"旧标签将被取消链接。新标签将替换它。",deviceOffline:"SpoolBuddy 离线",material:"材料",colorName:"颜色名称",color:"颜色",brand:"品牌",weight:"重量 (g)",createSpool:"创建耗材",creating:"创建中...",spoolCreated:"耗材已创建！准备写入。",createFailed:"创建耗材失败"},quickMenu:{printerPower:"打印机电源",systemControls:"系统",restartDaemon:"重启守护进程",restartBrowser:"重启浏览器",reboot:"重启",shutdown:"关机",swipeToClose:"向下滑动关闭",confirmTitle:"确认",confirmShutdown:"确定要关闭SpoolBuddy吗？您需要物理访问才能重新开启。",confirmReboot:"确定要重启SpoolBuddy吗？",confirmRestartDaemon:"重启SpoolBuddy守护进程？NFC和秤将暂时不可用。",confirmRestartBrowser:"重启kiosk浏览器？屏幕将短暂变黑。",confirm:"确认",confirmPlugOn:"开启 {{name}}？",confirmPlugOff:"关闭 {{name}}？",turnOn:"开启",turnOff:"关闭"}},bugReport:{title:"报告错误",description:"描述",descriptionPlaceholder:"出了什么问题？请描述问题...",email:"邮箱（可选）",emailPlaceholder:"your@email.com",emailPrivacy:"如果提供，您的邮箱将包含在GitHub Issue的折叠部分中，以便维护者后续跟进。",screenshot:"截图",uploadOrPaste:"上传、粘贴或拖拽图片",dataCollectedSummary:"报告中包含哪些数据？",dataIncluded:"包含：",dataIncludedList:"应用版本、操作系统、架构、Python版本、数据库统计（仅计数）、打印机型号、喷嘴数量、固件版本、连接状态、集成状态（Spoolman、MQTT、HA）、非敏感设置、网络接口数量、Docker详情、依赖版本。",dataNeverIncluded:"绝不包含：",dataNeverIncludedList:"打印机名称、序列号、访问代码、密码、IP地址、邮箱地址、API密钥、令牌、Webhook URL、主机名或用户名。",submit:"提交",startLogging:"开始调试日志",stepEnableLogging:"调试日志已启用",stepReproduce:"请现在重现问题",stepStopLogging:"停止并提交报告",stopAndSubmit:"停止并提交",maxDuration:"{{minutes}}分钟后自动停止",stoppingLogs:"正在收集日志并提交...",submitting:"正在提交错误报告...",submitSuccess:"错误报告提交成功！",submitFailed:"提交错误报告失败",thankYou:"谢谢！",submitted:"您的错误报告已提交。",viewIssue:"查看Issue",unexpectedError:"发生了意外错误"},failureDetection:{title:"AI 故障检测",description:"通过自托管的 Obico ML API 监控打印,并对检测到的故障自动采取行动。",mlUrl:"Obico ML API 地址",mlUrlHint:"您自托管的 Obico ml_api 容器的基础 URL(例如 http://192.168.1.10:3333)。",test:"测试",testSuccess:"ML API 可访问且正常。",testFailed:"无法访问 ML API。",sensitivity:"灵敏度",sensitivityLow:"低(减少误报)",sensitivityMedium:"中(平衡)",sensitivityHigh:"高(更早检测,更多误报)",sensitivityHint:"调整触发警告和故障的置信度阈值。",action:"检测到故障时的操作",actionNotify:"仅通知",actionPause:"暂停打印",actionPauseOff:"暂停并切断电源",pollInterval:"检查间隔(秒)",pollIntervalHint:"打印过程中每台打印机的检查频率。最小 5 秒,最大 120 秒。",externalUrlMissing:"External URL is not set.",externalUrlHint:"The ML API fetches the camera snapshot by URL. Set the External URL in General settings so the ML API container can reach Bambuddy.",perPrinterTitle:"监控的打印机",perPrinterHint:"选择检测服务要监视哪些打印机。",monitorAll:"监控所有已连接的打印机",statusTitle:"状态",serviceRunning:"服务运行中",thresholds:"低 / 高阈值",activePrinters:"活动打印",noActivePrints:"当前没有正在进行的打印。",historyTitle:"最近检测",noHistory:"暂无检测记录。"},makerworld:{title:"MakerWorld",description:"粘贴 MakerWorld 模型链接，即可直接在 Bambuddy 中导入并打印 —— 无需切换到 Bambu Handy 应用。",pasteUrlHeader:"从 MakerWorld 导入",pasteUrlPlaceholder:"https://makerworld.com/en/models/… 或粘贴任意 MakerWorld 链接",resolveButton:"解析",signInRequiredTitle:"下载需要登录 Bambu Cloud",signInRequiredBody:"您可以匿名浏览模型详情，但下载 3MF 文件需要 Bambu Cloud 账户。",openCloudSettings:"打开云设置",untitledModel:"无标题模型",byCreator:"作者: {{name}}",downloadsCount:"{{count}} 次下载",licensePrefix:"许可协议",alreadyImported:"已在资料库中",openOnMakerworld:"在 MakerWorld 中打开",alreadyInLibrary:"此模型已在您的资料库中 —— 可在文件管理器 → MakerWorld 中找到",importSuccess:"已导入 {{filename}} —— 已保存到文件管理器 → MakerWorld",platesHeader:"打印板 ({{count}})",plateDefaultName:"打印板 {{n}}",materialCount:"{{count}} 种耗材",amsRequired:"需要 AMS",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"保存",sliceIn:"保存并在 {{slicer}} 中切片",disclaimer:"MakerWorld 集成使用由社区记录的 API 接口。Bambuddy 与 MakerWorld 或 Bambu Lab 没有从属或认可关系。",lastImportSuccess:"已导入到您的资料库",lastImportAlreadyInLibrary:"已存在于您的资料库中",viewInLibrary:"在文件管理器中查看",openInBambuStudio:"在 Bambu Studio 中打开",openInOrcaSlicer:"在 OrcaSlicer 中打开",importTo:"导入到文件管理器",recentImportsHeader:"最近导入",phaseResolving:"解析中",phaseDownloading:"下载中",folderAuto:"MakerWorld (默认)",importAll:"全部导入",importAllProgress:"正在导入 {{current}}/{{total}}",openGallery:"打开图片库",galleryPrev:"上一张",galleryNext:"下一张",deleteImport:"从资料库中移除",importDeleting:"正在移除…",importDeleted:"已从资料库中移除",confirmDelete:"从资料库中移除 {{filename}}？本地文件将被删除，但可以从 MakerWorld 重新导入。",errors:{resolveFailed:"无法解析该 MakerWorld 链接。",downloadFailed:"下载失败。请重试。",deleteFailed:"无法从资料库中移除文件。"}},libraryTrash:{title:"回收站",headerButton:"回收站",headerTooltip:"查看已移至回收站的文件",backToFiles:"返回文件管理器",subtitleAdmin:"已删除的文件会在回收站保留 {{days}} 天，之后自动删除。此视图显示所有用户的回收站。",subtitleUser:"已删除的文件会在回收站保留 {{days}} 天，之后自动删除。",loading:"正在加载回收站…",loadError:"无法加载回收站。",empty:"回收站为空。",summary:"{{count}} 个文件 · {{size}}",emptyTrash:"清空回收站",restore:"还原",purgeNow:"立即删除",autoPurgeIn:"将于 {{when}} 自动删除",days:"天",retentionLabel:"自动删除时间",selectAll:"全选",selectOne:"选择 {{filename}}",selectionCount:"已选择 {{count}} 项",bulkRestore:"还原所选",bulkPurge:"删除所选",col:{filename:"文件",folder:"文件夹",size:"大小",deleted:"移入回收站",autoPurge:"自动删除",owner:"所有者",actions:"操作"},confirm:{purgeTitle:"永久删除？",purgeBody:"{{filename}} 将从磁盘中删除，无法恢复。",emptyTitle:"清空回收站？",emptyBody:"全部 {{count}} 个文件将从磁盘中删除。此操作无法撤消。",bulkPurgeTitle:"永久删除所选文件？",bulkPurgeBody:"所选的 {{count}} 个文件将从磁盘中删除，无法恢复。",cta:"永久删除"},toast:{restored:"文件已还原。",restoreFailed:"无法还原文件。",purged:"文件已永久删除。",purgeFailed:"无法删除文件。",emptied:"已从回收站删除 {{count}} 个文件。",emptyFailed:"无法清空回收站。",retentionSaved:"自动删除已设置为 {{days}} 天。",retentionFailed:"无法保存保留设置。",bulkRestored:"已还原 {{count}} 个文件。",bulkPurged:"已删除 {{count}} 个文件。"}},libraryPurge:{title:"清理旧文件",headerButton:"清理旧文件",headerTooltip:"批量将旧文件移至回收站",description:"早于所选阈值的文件将被移至回收站。外部文件夹会被跳过。在自动删除之前，您可以从回收站还原文件。",ageLabel:"移动早于以下天数的文件",days:"天",includeNeverPrinted:"包括从未打印过的文件",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"正在检查匹配的文件数量…",previewFailed:"无法预览清理结果。",previewSummary:"{{count}} 个文件 · {{size}} 将被移至回收站",andMore:"…还有 {{count}} 个",warning:"文件将被软删除——在保留期结束前，您可以从回收站还原它们。",confirmCta:"将 {{count}} 个移至回收站",purging:"正在移至回收站…",toast:{success:"已将 {{count}} 个文件移至回收站。",failed:"无法清理文件。"}},libraryAutoPurge:{enableLabel:"自动清理旧文件",enableDescription:"每天执行一次管理员清理。文件会先进入回收站——不会立即删除。",ageLabel:"自动清理早于以下天数的文件",ageDescription:"最少 7 天，最多 10 年。使用与手动「清理旧文件」按钮相同的时间规则。",days:"天",includeNeverPrinted:"包括从未打印过的文件",saveFailed:"无法保存自动清理设置。"},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},Cme={nav:{printers:"印表機",archives:"歸檔",queue:"佇列",stats:"統計",profiles:"設定檔案",maintenance:"維護",projects:"專案",inventory:"耗材",files:"檔案管理器",makerworld:"MakerWorld",notifications:"通知",settings:"設定",system:"系統",collapseSidebar:"收起側邊欄",expandSidebar:"展開側邊欄",update:"更新",updateAvailable:"有可用更新：v{{version}}",updateAvailableBanner:"版本 {{version}} 已發布！",viewUpdate:"檢視更新",viewOnGithub:"在 GitHub 上檢視",keyboardShortcuts:"鍵盤快捷鍵 (?)",switchToLight:"切換到淺色模式",switchToDark:"切換到深色模式",smartSwitches:"智慧開關",logout:"登出"},common:{save:"儲存",saving:"儲存中...",cancel:"取消",delete:"刪除",edit:"編輯",add:"新增",close:"關閉",confirm:"確認",loading:"載入中...",error:"錯誤",success:"成功",warning:"警告",enabled:"已啟用",disabled:"已停用",yes:"是",no:"否",on:"開",off:"關",all:"全部",none:"無",search:"搜尋",filter:"篩選",sort:"排序",refresh:"重新整理",download:"下載",upload:"上傳",uploading:"上傳中...",uploadFailed:"上傳失敗",actions:"操作",status:"狀態",name:"名稱",description:"描述",date:"日期",time:"時間",hours:"小時",minutes:"分鐘",seconds:"秒",days:"天",enable:"啟用",disable:"停用",permissions:"權限",noPrinters:"未設定印表機",noData:"尚無資料",linkNotFound:"未找到連結",required:"必填",optional:"可選",dismiss:"關閉",apply:"套用",reset:"重設",export:"匯出",import:"匯入",clear:"清除",selectAll:"全選",deselectAll:"取消全選",noChange:"— 不更改 —",unchanged:"未更改",unassigned:"未分配",unknown:"未知",unknownError:"未知錯誤",today:"今天",tomorrow:"明天",asap:"儘快",overdue:"已逾期",now:"現在",collapse:"收起",expand:"展開",viewArchive:"檢視歸檔",viewInFileManager:"在檔案管理器中檢視",addedBy:"由 {{username}} 新增",prints:"次列印",more:"還有 {{count}} 個",ascending:"升序",descending:"降序",back:"返回",copy:"複製",copied:"已複製!",printer:"印表機",remove:"移除",type:"類型",print:"列印",rename:"重新命名",move:"移動",create:"建立",duplicate:"複製",left:"左",right:"右"},printers:{title:"印表機",addPrinter:"新增印表機",editPrinter:"編輯印表機",deletePrinter:"刪除印表機",printerName:"印表機名稱",serialNumber:"序列號",ipAddress:"IP 位址 / 主機名稱",accessCode:"存取碼",model:"型號",nozzleCount:"噴嘴數量",autoArchive:"自動歸檔",status:{available:"可用",idle:"空閒",printing:"列印中",paused:"已暫停",offline:"離線",problem:"故障",error:"錯誤",finished:"已完成",unknown:"未知"},temperatures:{nozzle:"噴嘴",bed:"熱床",chamber:"腔室"},progress:"{{percent}}% 完成",timeRemaining:"剩餘 {{time}}",deleteConfirm:'確定要刪除"{{name}}"嗎？',maintenanceOk:"維護正常",maintenanceWarning:"{{count}} 個警告",maintenanceWarning_plural:"{{count}} 個警告",maintenanceDue:"{{count}} 個到期",maintenanceDue_plural:"{{count}} 個到期",sort:{name:"名稱",status:"狀態",model:"型號",location:"位置",ascending:"升序排列",descending:"降序排列"},cardSize:{small:"小卡片",medium:"中卡片",large:"大卡片",extraLarge:"超大卡片"},hideOffline:"隱藏離線",nextAvailable:"下一個可用",powerOn:"開機",offlinePrintersWithPlugs:"帶智慧插座的離線印表機",noPrintersConfigured:"尚未設定印表機",search:"搜尋印表機...",noSearchResults:"沒有印表機符合您的搜尋或篩選條件",filter:{allStatuses:"所有狀態",allLocations:"所有位置"},readyToPrint:"準備列印",external:"外部",extL:"外接左",extR:"外接右",deleteArchives:"刪除列印歸檔",noLabel:"無標籤",printPreview:"列印預覽",width:"寬度",height:"高度",noObjectsFound:"未找到物件",objectsLoadedOnPrintStart:"物件在列印開始時載入",willBeSkipped:"將被跳過",name:"名稱",serialCannotBeChanged:"序列號無法更改",locationHelp:"用於分組印表機和篩選佇列任務",wifiSignal:{veryWeak:"非常弱",weak:"弱",fair:"一般",good:"良好",excellent:"優秀"},maintenanceUpToDate:"所有維護均已完成 - 點選檢視",chamberLightOn:"開啟腔室燈",chamberLightOff:"關閉腔室燈",files:"檔案",browseFiles:"瀏覽印表機檔案",autoOffAfterPrint:"列印後自動關機",autoOffExecuted:"已執行自動關機 - 開啟印表機以重設",hmsErrors:"HMS 錯誤",viewHmsErrors:"檢視 {{count}} 個 HMS 錯誤",resume:"繼續",pause:"暫停",stop:"停止",camera:"攝影機",skipObject:"跳過物件",reconnect:"重新連線",forceRefresh:"強制重新整理",forceRefreshSuccess:"已請求重新整理",mqttDebug:"MQTT 偵錯",printerInformation:"印表機資訊",copyToClipboard:"複製",copied:"已複製！",state:"狀態",wifiSignalLabel:"Wi-Fi 訊號",developerMode:"開發者模式",enabled:"已啟用",disabled:"已停用",addedOn:"新增日期",sdCard:"SD 卡",inserted:"已插入",notInserted:"未插入",totalPrintHours:"列印時長",activeNozzle:"目前：{{nozzle}} 噴嘴",nozzleRack:"噴嘴架",nozzleDocked:"已停靠",nozzleMounted:"已安裝",nozzleActive:"使用中",nozzleIdle:"空閒",nozzleDiameter:"直徑",nozzleType:"類型",nozzleStatus:"狀態",nozzleFilament:"耗材",nozzleWear:"磨損",nozzleMaxTemp:"最高溫度",nozzleSerial:"序列號",nozzleHardenedSteel:"硬化鋼",nozzleStainlessSteel:"不鏽鋼",nozzleTungstenCarbide:"碳化鎢",nozzleFlow:"流量",nozzleHighFlow:"高流量",nozzleStandardFlow:"標準",firmwareUpdate:"韌體更新",firmwareInstructions:"在印表機觸控式螢幕上，前往",firmwareNav:"導航到",settings:"設定",firmware:"韌體",discoverPrinters:"發現印表機",searching:"搜尋中...",manualEntry:"手動輸入",addFromCloud:"從雲端新增",toast:{printerDeleted:"印表機已刪除",missingSpoolAssignment:"已在{{printer}}上開始列印。以下料槽未分配耗材: {{slots}}",printerAdded:"印表機已新增",printerUpdated:"印表機已更新",failedToDelete:"刪除印表機失敗",failedToAdd:"新增印表機失敗",failedToUpdate:"更新印表機失敗",commandSent:"命令已傳送",failedToSendCommand:"傳送命令失敗",turnedOn:"{{name}} 已開啟",failedToPowerOn:"開啟 {{name}} 失敗",scriptTriggered:"腳本已觸發",printStopped:"列印已停止",printPaused:"列印已暫停",printResumed:"列印已繼續",referenceDeleted:"參考已刪除",detectionAreaSaved:"檢測區域已儲存",failedToRunScript:"執行腳本失敗",failedToStopPrint:"停止列印失敗",failedToPausePrint:"暫停列印失敗",failedToResumePrint:"繼續列印失敗",failedToControlChamberLight:"控制腔室燈失敗",failedToSetSpeed:"設定列印速度失敗",failedToUpdateSetting:"更新設定失敗",failedToSkipObjects:"跳過物件失敗",failedToRereadRfid:"重新讀取 RFID 失敗",failedToCheckPlate:"檢查列印板失敗",failedToUpdateLabel:"更新標籤失敗",failedToDeleteReference:"刪除參考失敗",failedToSaveDetectionArea:"儲存檢測區域失敗",plateCheckEnabled:"列印板檢查已啟用",plateCheckDisabled:"列印板檢查已停用",calibrationSaved:"校準已儲存！",calibrationFailed:"校準失敗",rfidRereadInitiated:"已發起 RFID 重新讀取"},connection:{connected:"已連線",offline:"離線"},plateStatus:{markCleared:"將列印板標記為已清理",cleared:"列印板已清理",notCleared:"列印板未清理",inUse:"列印板使用中"},queue:{inQueue:"佇列中有 {{count}} 個列印任務",inQueue_plural:"佇列中有 {{count}} 個列印任務"},controls:"控制",rfid:{reread:"重新讀取 RFID"},bedJog:{title:"移動熱床",bed:"熱床",step:"步長 (mm)",up:"熱床上移",down:"熱床下移",disabledWhilePrinting:"列印中已停用",notHomedTitle:"印表機未歸零",notHomedMessage:"印表機自上次列印以來尚未歸零。請先執行自動歸零以確保安全定位（先停放噴頭，然後歸零 X、Y 和 Z），或者直接移動 — 軟限位將被繞過。",homeZ:"自動歸零",moveAnyway:"強制移動",homingStarted:"印表機自動歸零中…"},permission:{noAdd:"您沒有新增印表機的權限",noEdit:"您沒有編輯印表機的權限",noDelete:"您沒有刪除印表機的權限",noControl:"您沒有控制印表機的權限",noFiles:"您沒有存取印表機檔案的權限",noAmsRfid:"您沒有重新讀取 AMS RFID 的權限",noSmartPlugControl:"您沒有控制智慧插座的權限",noCamera:"您沒有檢視攝影機的權限"},modal:{addTitle:"新增印表機",editTitle:"編輯印表機",myPrinter:"我的印表機",selectModel:"選擇型號...",locationGroup:"位置 / 分組（可選）",locationPlaceholder:"例如：工作室、辦公室、地下室",autoArchiveLabel:"自動歸檔已完成的列印",fromPrinterSettings:"來自印表機設定",modelOptional:"型號（可選）",saveChanges:"儲存更改"},skipObjects:{tooltip:"跳過物件",onlyWhilePrinting:"跳過物件（僅在列印時）",requiresMultiple:"跳過物件（需要2個以上物件）",title:"跳過物件",matchIdsInfo:"將 ID 與印表機螢幕上的 ID 進行對照",printerShowsIds:"印表機螢幕上顯示列印板上物件的 ID",skipSelected:"跳過所選",skipping:"跳過中...",noObjectsSelected:"未選擇物件",selectObjectsToSkip:"選擇要從目前列印中跳過的物件",skipped:"已跳過",objectsSkipped:"物件已跳過",activeCount:"{{count}} 個活躍",waitForLayer:"等待第2層以上才能跳過物件（目前第 {{layer}} 層）",skip:"跳過",confirmTitle:"跳過物件？",confirmMessage:'確定要跳過"{{name}}"嗎？此操作無法復原。'},confirm:{deleteTitle:"刪除印表機",deleteMessage:'確定要刪除"{{name}}"嗎？這將移除所有連線設定。',deleteArchivesNote:"此印表機的所有列印歷史將被永久刪除。",keepArchivesNote:"列印歷史將保留，但不再與此印表機連結。",stopTitle:"停止列印",stopMessage:'確定要停止"{{name}}"上的目前列印嗎？這將取消列印任務。',stopButton:"停止列印",pauseTitle:"暫停列印",pauseMessage:'確定要暫停"{{name}}"上的目前列印嗎？',pauseButton:"暫停列印",resumeTitle:"繼續列印",resumeMessage:'確定要繼續"{{name}}"上的列印嗎？',resumeButton:"繼續列印",powerOnTitle:"開啟印表機",powerOnMessage:'確定要開啟"{{name}}"的電源嗎？',powerOnButton:"開機",powerOffTitle:"關閉印表機",powerOffMessage:'確定要關閉"{{name}}"的電源嗎？',powerOffWarning:'警告："{{name}}"正在列印中！確定要關閉電源嗎？這將中斷列印並可能損壞印表機。',powerOffButton:"關機"},bulk:{select:"選擇",selectAll:"全選",selectByLocation:"按位置選擇",selected:"已選擇{{count}}臺",actions:{stop:"停止",pause:"暫停",resume:"繼續",clearPlate:"清除列印床",clearHMS:"清除通知"},confirm:{stopTitle:"停止{{count}}個列印任務",stopMessage:"這將取消{{count}}臺印表機上的活動列印任務。此操作無法復原。",stopButton:"全部停止",pauseTitle:"暫停{{count}}個列印任務",pauseMessage:"這將暫停{{count}}臺印表機上的活動列印任務。",pauseButton:"全部暫停",clearPlateTitle:"清除{{count}}個列印床",clearPlateMessage:"這將清除{{count}}臺印表機的列印床，可能會觸發佇列中的任務。",clearPlateButton:"全部清除"},success:"{{action}}已在{{count}}臺印表機上完成",partial:"{{succeeded}}成功，{{failed}}失敗",noneApplicable:"沒有選中的印表機處於適合此操作的狀態",selectByState:"按狀態選擇"},discovery:{title:"發現印表機",searching:"搜尋中...",scanning:"掃描中...",scanProgress:"掃描中... {{scanned}}/{{total}}",foundPrinters:"發現 {{count}} 臺印表機",noPrintersFound:"未找到印表機",noPrintersFoundSubnet:"在指定子網中未找到印表機。",noPrintersFoundNetwork:"在網路上未找到印表機。",allConfigured:"所有發現的印表機已設定完畢。",alreadyAdded:"已新增",select:"選擇",manualEntry:"手動輸入",addFromCloud:"從雲端新增",subnetToScan:"要掃描的子網",dockerNote:"偵測到 Docker 環境。請以 CIDR 格式輸入印表機所在子網。需要在 docker-compose.yml 中設定 network_mode: host。",scanSubnet:"掃描子網查詢印表機",discoverNetwork:"在網路上發現印表機",scanningSubnet:"正在掃描子網查詢拓竹印表機...",scanningNetwork:"正在掃描網路...",serialRequired:"需要序列號",unknown:"未知",failedToStart:"啟動發現失敗"},drying:{start:"開始乾燥",stop:"停止乾燥",temperature:"溫度",duration:"時長",hours:"小時",timeRemaining:"剩餘 {{time}}",active:"乾燥中",notSupported:"不支援乾燥",powerRequired:"連線AMS電源介面卡以啟用乾燥",startingDrying:"正在啟動乾燥...",stoppingDrying:"正在停止乾燥...",rotateTray:"乾燥時旋轉料盤"},filaments:"耗材",openCameraOverlay:"開啟攝影機疊加層",openCameraWindow:"在新視窗中開啟攝影機",firmwareUpdateAvailable:"韌體更新可用：{{current}} → {{latest}}",firmwareUpToDate:"韌體 {{version}} — 已是最新",firmwareUpdateButton:"更新",plateDetection:{noPermission:"您沒有更新印表機的權限",enabledClick:"列印板檢查已啟用 - 點選停用",disabledClick:"列印板檢查已停用 - 點選啟用",manageCalibration:"管理列印板檢測校準",calibrationRequired:"需要校準",calibrationInstructions:"請確保列印板<strong>完全空置</strong>，然後點選校準。",calibrationDescription:"校準會拍攝空置列印板的參考影像。後續檢查將與此參考進行比較以檢測物體。",calibrationTip:"<strong>提示：</strong>您最多可以為不同的列印板儲存5個校準。系統會在檢查時自動使用最佳匹配。",plateEmpty:"列印板似乎是空的",objectsDetected:"在列印板上偵測到物體",confidence:"置信度",difference:"差異",analysisPreview:"分析預覽：",analysisLegend:"綠色框 = 檢測區域，紅色覆蓋 = 與校準的差異",savedReferences:"已儲存的參考 ({{count}}/{{max}})",deleteReference:"刪除參考",labelPlaceholder:"標籤...",clickToEdit:"{{label}} - 點選編輯",clickToAddLabel:"點選新增標籤"},speed:{title:"列印速度",silent:"靜音 (50%)",standard:"標準 (100%)",sport:"運動 (124%)",ludicrous:"瘋狂 (166%)"},airduct:{title:"風道模式",cooling:"製冷",heating:"加熱"},noSdCard:"無SD",door:{open:"開",closed:"關"},fans:{partCooling:"零件冷卻風扇",auxiliary:"輔助風扇",chamber:"腔室風扇"},clickToViewHmsErrors:"點選檢視 HMS 錯誤",estimatedCompletion:"預計完成時間",plateNumber:"板 {{number}}",slotOptions:"槽位選項",amsPopup:{friendlyName:"AMS 名稱",friendlyNamePlaceholder:"例如 AMS 友好名稱",serialNumber:"序列號",firmwareVersion:"韌體",save:"儲存",clear:"清除",noEditPermission:"您沒有重新命名 AMS 單元的權限"},firmwareModal:{title:"韌體更新",titleUpToDate:"韌體資訊",currentVersion:"目前版本：",latestVersion:"最新版本：",releaseNotes:"發布說明",checkingPrereqs:"正在檢查前提條件...",sdCardReady:"SD 卡已就緒。點選下方上傳韌體。",uploadedSuccess:"韌體已上傳到 SD 卡！",applyInstructions:"在印表機上套用更新：",step1:"在印表機觸控式螢幕上，前往<strong>設定</strong>",step2:"導航到<strong>韌體</strong>",step3:"選擇<strong>從 SD 卡更新</strong>",step4:"更新將需要 10-20 分鐘",done:"完成",starting:"啟動中...",uploadFirmware:"上傳韌體",uploadFailed:"上傳啟動失敗：{{error}}",uploadedToast:"韌體已上傳！請在印表機螢幕上觸發更新。",availableVersions:"可用版本",usable:"可用",unavailable:"不可用",installed:"已安裝",newerBadge:"較新",olderBadge:"較舊",currentBadge:"目前"},accessCodePlaceholder:"留空以保持目前值",roi:{title:"檢測區域 (ROI)",xStart:"X 起點",yStart:"Y 起點",width:"寬度",height:"高度",instruction:"調整檢測區域以聚焦到列印板。預覽中的綠色框顯示目前區域。"},developerModeWarning:"以下印表機未啟用開發者區域網路模式：{{names}}。某些功能可能無法使用。",howToEnable:"如何啟用",incompatibleFile:"此檔案是為 {{slicedFor}} 切片的，但該印表機是 {{printerModel}}",dropNotPrintable:"只能列印 .gcode 和 .gcode.3mf 檔案",dropToPrint:"拖放以列印",cannotPrint:"印表機忙碌"},archives:{title:"列印歸檔",searchPlaceholder:"搜尋歸檔...",filterByPrinter:"按印表機篩選",filterByStatus:"按狀態篩選",sortBy:"排序方式",sortNewest:"最新優先",sortOldest:"最舊優先",sortName:"名稱",sortDuration:"時長",sortLargest:"最大優先",sortSmallest:"最小優先",sortSize:"大小",noArchives:"未找到歸檔",noArchivesSearch:"沒有匹配搜尋的歸檔",originalPrintNotVisible:"原始列印不可見 - 請嘗試清除篩選條件",noArchivesYet:"尚無歸檔",prints:"條列印",pagination:{showing:"顯示",to:"至",of:"共",show:"每頁",page:"頁",all:"全部"},loadingArchives:"載入歸檔中...",releaseToUpload:"放開以上傳",showAll:"顯示全部",showFavoritesOnly:"僅顯示收藏",gridView:"網格檢視",listView:"列表檢視",calendarView:"日曆檢視",logView:"列印日誌",manageTags:"管理標籤",showFailedPrints:"顯示失敗的列印",hideFailedPrints:"隱藏失敗的列印",hideDuplicates:"隱藏重複項",viewOriginalPrint:"點選檢視原始列印 (#{{id}})",printTime:"列印時間",filamentUsed:"耗材用量",cost:"成本",reprint:"重新列印",preview:"預覽",deleteArchive:"刪除歸檔",deleteConfirm:"確定要刪除此歸檔嗎？",favorite:"收藏",unfavorite:"取消收藏",viewDetails:"檢視詳情",status:{completed:"已完成",failed:"失敗",stopped:"已停止"},toast:{source3mfAttached:"源 3MF 已附加：{{filename}}",failedUploadSource3mf:"上傳源 3MF 失敗",source3mfRemoved:"源 3MF 已移除",failedRemoveSource3mf:"移除源 3MF 失敗",f3dAttached:"F3D 已附加：{{filename}}",failedUploadF3d:"上傳 F3D 失敗",f3dRemoved:"F3D 已移除",failedRemoveF3d:"移除 F3D 失敗",timelapseAttached:"縮時攝影已附加：{{filename}}",timelapseAlreadyAttached:"縮時攝影已附加",noMatchingTimelapse:"未找到匹配的縮時攝影",failedScanTimelapse:"掃描縮時攝影失敗",failedAttachTimelapse:"附加縮時攝影失敗",timelapseRemoved:"縮時攝影已移除",failedRemoveTimelapse:"移除縮時攝影失敗",timelapseUploaded:"縮時攝影已上傳：{{filename}}",failedUploadTimelapse:"上傳縮時攝影失敗",archiveDeleted:"歸檔已刪除",failedDeleteArchive:"刪除歸檔失敗",addedToFavorites:"已新增到收藏",removedFromFavorites:"已從收藏中移除",projectUpdated:"專案已更新",failedUpdateProject:"更新項目失敗",linkCopied:"連結已複製到剪貼簿",failedCopyLink:"複製連結失敗",photoDeleted:"照片已刪除",failedDeletePhoto:"刪除照片失敗",failedDeleteArchives:"刪除歸檔失敗",failedUpdateFavorites:"更新收藏失敗",exportDownloaded:"匯出已下載",exportFailed:"匯出失敗"},menu:{print:"列印",schedule:"排程",openInBambuStudio:"在切片軟體中開啟",slice:"切片",externalLink:"外部連結",viewOnMakerWorld:"在 MakerWorld 上檢視",preview3d:"3D 預覽",viewTimelapse:"檢視縮時攝影",scanForTimelapse:"掃描縮時攝影",uploadTimelapse:"上傳縮時攝影",removeTimelapse:"移除縮時攝影",downloadSource3mf:"下載源 3MF",uploadSource3mf:"上傳源 3MF",replaceSource3mf:"替換源 3MF",removeSource3mf:"移除源 3MF",uploadF3d:"上傳 F3D",replaceF3d:"替換 F3D",downloadF3d:"下載 F3D",removeF3d:"移除 F3D",download:"下載",copyDownloadLink:"複製下載連結",qrCode:"QR Code",viewPhotos:"檢視照片",viewPhotosCount:"檢視照片 ({{count}})",projectPage:"專案頁面",addToFavorites:"新增到收藏",removeFromFavorites:"從收藏中移除",edit:"編輯",goToProject:"前往專案：{{name}}",addToProject:"新增到專案",removeFromProject:"從專案中移除",loading:"載入中...",noProjectsAvailable:"無可用專案",searchProjects:"Search projects…",select:"選擇",deselect:"取消選擇",delete:"刪除"},permission:{noReprint:"您沒有重新列印此歸檔的權限",noAddToQueue:"您沒有新增到佇列的權限",noUpdateArchives:"您沒有更新歸檔的權限",noUploadFiles:"您沒有上傳檔案的權限",noDownload:"您沒有下載歸檔的權限",noCopyLink:"您沒有複製下載連結的權限",noDelete:"您沒有刪除此歸檔的權限",noCreate:"您沒有建立歸檔的權限"},platePicker:{title:"選擇要預覽的列印板",hint:"此存檔包含多個列印板。選擇一個在 GCode 檢視器中開啟。",plateLabel:"列印板 {{index}}",objectCount:"{{count}} 個物件",objectCount_plural:"{{count}} 個物件",noGcode:"此存檔沒有可預覽的已切片 G 代碼。請先在 Bambu Studio 中開啟並切片。"},card:{previousPlate:"上一個板",nextPlate:"下一個板",plateNumber:"板 {{index}}",moreOptions:"右鍵檢視更多選項",addToFavorites:"新增到收藏",removeFromFavorites:"從收藏中移除",cancelled:"已取消",failed:"失敗",duplicate:"重複",duplicateTitle:"此模型之前已列印過",openSource3mf:"在 Bambu Studio 中開啟源 3MF（右鍵檢視更多選項）",downloadF3d:"下載 Fusion 360 設計檔案",viewTimelapse:"檢視縮時攝影",viewPhoto:"檢視 1 張照片",viewPhotos:"檢視 {{count}} 張照片",openFolder:"開啟資料夾：{{name}}",slicedFile:"已切片檔案 - 可以列印",sourceFile:"僅原始檔 - 無 AMS 對應可用",gcode:"GCODE",source:"原始檔",project:"專案：{{name}}",estimated:"預計：{{time}}",actual:"實際：{{time}}",accuracy:"準確度：{{percent}}%",filament:"{{weight}}g",layer:"{{count}} 層",layers:"{{count}} 層",object:"{{count}} 個物件",objects:"{{count}} 個物件",slicedFor:"為 {{model}} 切片",uploadedBy:"上傳者",noPermissionReprint:"您沒有重新列印的權限",noFileForReprint:"無可用的 3MF 檔案 — 列印紀錄時無法從印表機下載該檔案",noPermissionEdit:"您沒有編輯歸檔的權限",noPermissionDelete:"您沒有刪除歸檔的權限",reprint:"重新列印",schedulePrint:"排程列印",schedule:"排程",openInBambuStudio:"在切片軟體中開啟",openInBambuStudioToSlice:"在切片軟體中開啟進行切片",slice:"切片",externalLink:"外部連結",makerWorld:"MakerWorld：{{designer}}",viewProject:"檢視專案",noExternalLink:"無外部連結",preview3d:"3D 預覽",download:"下載",edit:"編輯",delete:"刪除"},modal:{deleteArchive:"刪除歸檔",deleteConfirm:'確定要刪除"{{name}}"嗎？此操作無法復原。',deleteButton:"刪除",removeSource3mf:"移除源 3MF",removeSource3mfConfirm:'確定要從"{{name}}"中移除源 3MF 檔案嗎？這將刪除原始切片專案檔案。',removeButton:"移除",removeF3d:"移除 F3D",removeF3dConfirm:'確定要從"{{name}}"中移除 Fusion 360 設計檔案嗎？',removeTimelapse:"移除縮時攝影",removeTimelapseConfirm:'確定要從"{{name}}"中移除縮時攝影影片嗎？',timelapse:"{{name}} - 縮時攝影",selectTimelapse:"選擇縮時攝影",selectTimelapseDesc:"未找到自動匹配。請選擇此列印的縮時攝影：",deleteArchives:"刪除歸檔",deleteArchivesConfirm:"確定要刪除 {{count}} 個歸檔嗎？此操作無法復原。",deleteCount:"刪除 {{count}} 個"},page:{title:"歸檔",printsCount:"{{filtered}} / {{total}} 次列印",dropFilesHere:"將 .3mf 檔案拖放到此處",releaseToUpload:"放開以上傳",only3mfSupported:"僅支援 .3mf 檔案",close:"關閉",selected:"已選擇 {{count}} 個",selectAll:"全選",tags:"標籤",project:"專案",favorite:"收藏",delete:"刪除",toggledFavorites:"已切換 {{count}} 個歸檔的收藏狀態",failedUpdateFavorites:"更新收藏失敗",archivesDeleted:"已刪除 {{count}} 個歸檔",failedDeleteArchives:"刪除歸檔失敗",photoDeleted:"照片已刪除",failedDeletePhoto:"刪除照片失敗"},list:{name:"名稱",printer:"印表機",date:"日期",size:"大小",actions:"操作",hasTimelapse:"有縮時攝影"},log:{date:"日期",printName:"列印名稱",printer:"印表機",user:"使用者",status:"狀態",duration:"時長",filament:"耗材",allPrinters:"所有印表機",allUsers:"所有使用者",allStatuses:"所有狀態",cancelled:"已取消",skipped:"已跳過",dateFrom:"從",dateTo:"到",noEntries:"未找到列印日誌條目",showing:"顯示 {{count}} / {{total}} 條",rowsPerPage:"行數",page:"頁",prev:"上一頁",next:"下一頁",clearLog:"清除日誌",clearLogTitle:"清除列印日誌",clearLogConfirm:"所有列印日誌條目將被永久刪除。歸檔和佇列項目不受影響。此操作無法復原。確定要繼續嗎？",clearLogButton:"全部清除",cleared:"已清除 {{count}} 條日誌",clearFailed:"清除列印日誌失敗"}},queue:{title:"列印佇列",subtitle:"排程和管理您的列印任務",addToQueue:"新增到佇列",print:"列印",reprint:"重新列印",schedulePrint:"排程列印",editQueueItem:"編輯佇列項目",printToPrinters:"列印到 {{count}} 臺印表機",queueToPrinters:"佇列到 {{count}} 臺印表機",queueSelectedPlates:"將 {{count}} 個熱床加入佇列",selectAllPlates:"選擇全部 {{count}} 個熱床",deselectAll:"取消全選",printQueued:"已加入列印佇列",itemsQueued:"{{count}} 個任務已加入佇列",sending:"傳送中...",sendingProgress:"傳送中 {{current}}/{{total}}...",adding:"新增中...",addingProgress:"新增中 {{current}}/{{total}}...",savingProgress:"儲存中 {{current}}/{{total}}...",clearQueue:"清空佇列",clearHistory:"清除歷史",emptyQueue:"佇列為空",position:"位置",scheduledTime:"排程時間",moveUp:"上移",moveDown:"下移",startNow:"立即開始",printingInProgress:"列印進行中...",viewArchive:"檢視歸檔",viewInFileManager:"在檔案管理器中檢視",itemCount:"{{count}} 個項目",itemCount_plural:"{{count}} 個項目",dragToReorder:"拖曳以重新排序（僅限盡快）",reorderHint:'位置僅影響"儘快"項目。排程項目按設定時間執行。',sjf:{label:"SJF",tooltip:"最短任務優先 — 排程器優先處理較短的列印任務"},addedBy:"由 {{name}} 新增",nextInQueue:"佇列中的下一個",clearPlateSuccess:"列印板已清理 — 準備進行下一個列印",plateNumber:"板 {{index}}",quantity:"數量",quantityHint:"建立 {{count}} 個佇列項目",activeBatches:"活躍批次",batchProgress:"已完成 {{completed}}/{{total}}",cancelBatch:"取消剩餘",batchCancelled:"已取消剩餘批次項目",cancelBatchConfirmTitle:"取消批次",cancelBatchConfirmMessage:"取消此批次中所有剩餘的待處理項目？",batch:"批次",sections:{currentlyPrinting:"正在列印",queued:"佇列中",history:"歷史"},status:{pending:"等待中",waiting:"等待中",printing:"列印中",paused:"已暫停",completed:"已完成",failed:"失敗",skipped:"已跳過",cancelled:"已取消"},summary:{printing:"列印中",queued:"佇列中",totalTime:"總佇列時間",totalWeight:"總佇列重量",history:"歷史"},filter:{allPrinters:"所有印表機",unassigned:"未分配",allStatus:"所有狀態",allLocations:"所有位置",any:"任意"},sort:{byPosition:"按位置排序",byName:"按名稱排序",byPrinter:"按印表機排序",bySchedule:"按排程排序",byDate:"按日期排序",ascendingOldest:"升序（最舊優先）",descendingNewest:"降序（最新優先）"},badges:{staged:"已暫存",requiresPrevious:"需要前一個成功",autoPowerOff:"自動關機",gcodeInjection:"G-code"},empty:{title:"沒有排程的列印",description:'從歸檔頁面使用右鍵選單中的"排程"選項來排程列印，或拖放檔案開始。'},time:{asap:"儘快",overdue:"已逾期",now:"現在",lessThanMinute:"不到一分鐘",inMinutes:"{{count}} 分鐘後",inHours:"{{count}} 小時後"},actions:{stopPrint:"停止列印",startPrint:"開始列印",requeue:"重新佇列"},bulkEdit:{title:"編輯 {{count}} 個項目",title_plural:"編輯 {{count}} 個項目",description:"僅更改的設定將套用於所選項目。",printer:"印表機",noChange:"— 不更改 —",queueOptions:"佇列選項",staged:"暫存（手動開始）",autoPowerOff:"列印後自動關機",requirePrevious:"要求前一個成功",printOptions:"列印選項",bedLevelling:"熱床調平",flowCalibration:"流量校準",vibrationCalibration:"振動校準",layerInspection:"首層檢查",timelapse:"縮時攝影",useAms:"使用 AMS",applyChanges:"套用更改",selectAll:"全選",deselectAll:"取消全選",selected:"已選擇 {{count}} 個",editSelected:"編輯所選",cancelSelected:"取消所選"},confirm:{cancelTitle:"取消排程列印",cancelMessage:'確定要取消"{{name}}"嗎？',stopTitle:"停止列印",stopMessage:'確定要停止目前列印"{{name}}"嗎？這將取消印表機上的列印任務。',removeTitle:"從歷史中移除",removeMessage:'確定要從佇列歷史中移除"{{name}}"嗎？',clearHistoryTitle:"清除歷史",clearHistoryMessage:"確定要從歷史中移除所有 {{count}} 個項目嗎？",cancelButton:"取消列印",stopButton:"停止列印",thisPrint:"此列印",thisItem:"此項目"},toast:{cancelled:"佇列項目已取消",cancelFailed:"取消項目失敗",removed:"佇列項目已移除",removeFailed:"移除項目失敗",stopped:"列印已停止",stopFailed:"停止列印失敗",released:"列印已加入佇列",startFailed:"開始列印失敗",reorderFailed:"重新排序佇列失敗",historyCleared:"已清除 {{count}} 條歷史紀錄",clearHistoryFailed:"清除歷史失敗",updateFailed:"更新項目失敗",bulkCancelled:"已取消 {{count}} 個項目",bulkCancelFailed:"批次取消項目失敗"},timeline:{listView:"列表",timelineView:"時間線",unassigned:"未分配",noData:"當天沒有計畫的列印任務",allDoneBy:"所有列印預計在 {{time}} 前完成",staged:"暫存",filterAll:"全部顯示",filterPrinting:"列印中",filterQueued:"佇列中",time:{anyMoment:"即將完成",minutesLeft:"剩餘{{minutes}} 分鐘",hoursLeft:"剩餘{{hours}}小時",hoursMinutesLeft:"剩餘{{hours}}小時{{minutes}} 分鐘"},day:{previous:"前一天",next:"後一天",today:"今天"}},permissions:{noStopPrint:"您沒有停止列印的權限",noStartPrint:"您沒有開始列印的權限",noEdit:"您沒有編輯此佇列項目的權限",noCancel:"您沒有取消此佇列項目的權限",noRequeue:"您沒有重新佇列的權限",noRemove:"您沒有移除此佇列項目的權限",noClearHistory:"您沒有清除所有歷史的權限",noEditItems:"您沒有編輯佇列項目的權限",noCancelItems:"您沒有取消佇列項目的權限"}},backgroundDispatch:{unknownFile:"未知檔案",unknownPrinter:"未知印表機",startingPrints:"正在開始列印",progressSummary:"{{complete}}/{{total}} 完成 • 已分發：{{dispatched}} • 處理中：{{processing}}",expandDetails:"展開分發詳情",collapseDetails:"收起分發詳情",dismissToast:"關閉分發通知",cancelDispatchJob:"取消分發任務",cancel:"取消",cancelling:"取消中…",awaitingPrinter:"等待印表機…",status:{dispatched:"已分發",processing:"處理中",completed:"已完成",failed:"失敗",cancelled:"已取消"},toast:{cancellingUpload:"取消上傳中...",cancelled:"分發已取消",cancelFailed:"取消分發失敗",completeWithFailures:"後台分發完成：{{completed}} 成功，{{failed}} 失敗",completeSuccess:"後台分發完成：{{completed}} 成功",printStartedRemaining:"{{completed}} 個列印已開始，{{remaining}} 個正在傳送..."}},stats:{title:"儀表板",subtitle:"拖曳小工具以重新排列。點選眼睛圖示隱藏。",overview:"概覽",totalPrints:"總列印次數",successRate:"成功率",totalPrintTime:"總列印時間",printTime:"列印時間",totalFilament:"總耗材用量",filamentUsed:"耗材用量",filamentCost:"耗材成本",totalCost:"總成本",energyUsed:"能耗",energyCost:"能源成本",energyWarmingUpTooltip:"能耗追蹤正在收集每小時快照。當所選範圍之前至少存在一個快照時，時間段合計將變得準確。早期數值可能偏低。",averagePrintTime:"平均列印時間",printsPerDay:"每日列印次數",byPrinter:"按印表機",printsByPrinter:"各印表機列印次數",byMaterial:"按材料",byMonth:"按月份",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",allTime:"全部時間",quickStats:"快速統計",printActivity:"列印活動",filamentTypes:"耗材類型",filamentTrends:"耗材趨勢",failureAnalysis:"失敗分析",timeAccuracy:"時間準確度",successful:"成功：",failed:"失敗：",perfectEstimate:"100% = 完美估計",noTimeAccuracyData:"尚無時間準確度資料",noFilamentData:"尚無耗材資料",noPrinterData:"尚無印表機資料",noPrintData:"尚無列印資料",noPrintDataLast30Days:"最近 30 天無列印資料",failureReasons:"失敗原因",topFailureReasons:"主要失敗原因",failedPrintsCount:"{{failed}} / {{total}} 次列印失敗",lastWeekRate:"上週：{{rate}}%",resetLayout:"重設佈局",recalculateCosts:"重新計算成本",recalculateCostsHint:"使用目前耗材價格重新計算所有歸檔成本",exportStats:"匯出統計",exportAsCsv:"匯出為 CSV",exportAsExcel:"匯出為 Excel",hiddenCount:"{{count}} 個已隱藏",exportDownloaded:"匯出已下載",exportFailed:"匯出失敗",layoutReset:"佈局已重設",recalculatedCosts:"已為 {{count}} 個歸檔重新計算成本",recalculateFailed:"重新計算成本失敗",loadingStats:"載入統計資料中...",noPermissionResetLayout:"您沒有重設佈局的權限",noPermissionRecalculate:"您沒有重新計算成本的權限",noPrintDataInRange:"所選範圍內無列印資料",periodFilament:"期間耗材",periodCost:"期間成本",avgPerPrint:"每次列印平均",usageOverTime:"隨時間的使用量",filamentByWeight:"重量",printDuration:"列印時長",printerUtilization:"印表機利用率",filamentSuccess:"按材料成功率",printHabits:"列印習慣",printTimeOfDay:"列印時段",colorDistribution:"顏色分佈",noColorData:"尚無顏色資料",records:"紀錄",longestPrint:"最長列印",heaviestPrint:"最重列印",mostExpensivePrint:"最貴列印",busiestDay:"最忙碌的一天",successStreak:"連續成功",streakPrint:"連續列印",streakPrints:"{{count}} 次連續列印",printerStats:"印表機統計",hours:"小時",avgPrints:"平均列印",noArchiveData:"尚無列印資料",filamentByTime:"時間",avgWeight:"平均重量",avgTime:"平均時間",filamentByPrints:"列印次數",timeframe:{today:"今天","this-week":"本週","this-month":"本月","last-7":"最近 7 天","last-30":"最近 30 天","last-90":"最近 90 天","this-year":"今年","all-time":"全部時間",custom:"自訂範圍",from:"從",to:"到"},allUsers:"所有使用者",noUser:"無使用者（系統）",filterByUser:"按使用者篩選"},maintenance:{title:"維護",overview:"概覽",allOk:"所有維護均已完成",dueCount:"{{count}} 項到期",dueCount_plural:"{{count}} 項到期",warningCount:"{{count}} 個警告",warningCount_plural:"{{count}} 個警告",totalPrintTime:"總列印時間",nextMaintenance:"下次維護",nothingDue:"無到期項目",tasks:"任務",lastPerformed:"上次執行",interval:"間隔",hoursRemaining:"剩餘 {{hours}} 小時",hoursOverdue:"逾期 {{hours}} 小時",markDone:"標記為完成",performMaintenance:"執行維護",history:"歷史",noHistory:"無維護歷史",editPrintHours:"編輯列印時間",currentHours:"目前小時數",statusTab:"狀態",settingsTab:"設定",overdueCount:"{{count}} 個逾期",dueSoonCount:"{{count}} 個即將到期",dueSoon:"即將到期",allGood:"一切正常",overdueBy:"逾期 {{duration}}",dueIn:"{{duration}} 後到期",timeLeft:"剩餘 {{duration}}",day:"1 天",days:"{{count}} 天",week:"1 週",weeks:"{{count}} 週",month:"1 個月",months:"{{count}} 個月",year:"1 年",maintenanceTypes:"維護類型",maintenanceTypesDescription:"系統類型和您的自訂維護任務",addCustomType:"新增自訂類型",restoreDefaults:"恢復預設任務",intervalType:"間隔類型",intervalValue:"間隔 ({{type}})",icon:"圖示",documentationLink:"說明文件連結（可選）",assignToPrinters:"分配給印表機",selectAtLeastOnePrinter:"至少選擇一臺印表機",addType:"新增類型",custom:"自訂",printHours:"列印小時數",calendarDays:"日曆天數",exampleName:"例如：更換 HEPA 過濾器",viewDocumentation:"檢視說明文件",timeBasedInterval:"基於時間的間隔",intervalOverrides:"間隔覆蓋",intervalOverridesDescription:"為特定印表機自訂間隔",assignedToPrinters:"已分配給印表機：",noPrintersAssigned:"未分配印表機",addPrinterShort:"新增：",printersAssignedClick:"已分配 {{count}} 臺印表機 - 點選管理",removeFromPrinter:"從此印表機移除",types:{lubricateCarbonRods:"潤滑碳纖維杆",lubricateRails:"潤滑線性導軌",cleanNozzle:"清潔噴嘴/熱端",checkBelts:"檢查皮帶張力",cleanBuildPlate:"清潔列印板",checkExtruder:"檢查擠出機齒輪",checkCooling:"檢查冷卻風扇",generalInspection:"綜合檢查",cleanCarbonRods:"清潔碳纖維杆",lubricateSteelRods:"潤滑鋼杆",cleanSteelRods:"清潔鋼杆",cleanLinearRails:"清潔線性導軌",checkPtfeTube:"檢查 PTFE 管",replaceHepaFilter:"更換 HEPA 過濾器",replaceCarbonFilter:"更換活性炭過濾器",lubricateLeftNozzleRail:"潤滑左噴嘴導軌"},maintenanceComplete:"維護已標記為完成",typeUpdated:"維護類型已更新",typeDeleted:"維護類型已刪除",defaultsRestored:"已恢復 {{count}} 個預設任務",printHoursUpdated:"列印小時數已更新",printerAssigned:"印表機已分配",printerRemoved:"印表機已移除",deleteTypeConfirm:'刪除"{{name}}"？',deleteSystemTypeTitle:"刪除預設維護任務？",deleteSystemTypeMessage:'確定要刪除預設維護任務"{{name}}"嗎？',noPermissionUpdate:"您沒有更新維護項目的權限",noPermissionPerform:"您沒有執行維護的權限",noPermissionEditTypes:"您沒有編輯維護類型的權限",noPermissionDeleteTypes:"您沒有刪除維護類型的權限",noPermissionEditHours:"您沒有編輯列印時間的權限",noPermissionRemovePrinter:"您沒有移除印表機分配的權限",noPermissionAssignPrinter:"您沒有分配印表機的權限",noPermissionEditIntervals:"您沒有編輯間隔的權限",configureSettings:"設定維護類型和間隔"},settings:{title:"設定",general:"通用",tabs:{general:"通用",smartPlugs:"智慧插座",notifications:"通知",queue:"工作流程",filament:"耗材",network:"網路",apiKeys:"API 金鑰",virtualPrinter:"虛擬印表機",spoolbuddy:"SpoolBuddy",failureDetection:"故障檢測",users:"身份驗證",backup:"備份",emailAuth:"信箱認證",ldap:"LDAP",twoFa:"雙因素認證",oidc:"SSO / OIDC"},spoolbuddy:{infoTitle:"SpoolBuddy 裝置",infoBody:"SpoolBuddy kiosk 透過心跳自動註冊。如果裝置不再使用，或守護程式當機遺留了過時的重複項，可在此取消註冊。",duplicatesTitle:"已註冊 {{count}} 台裝置",duplicatesBody:"kiosk 介面只使用最先註冊的裝置。如果其中有因當機遺留的過時重複項，請取消註冊它——線上裝置會在下次心跳時重新註冊自己。",empty:"尚未註冊任何 SpoolBuddy 裝置。",online:"線上",offline:"離線",unregister:"取消註冊",unregisterSuccess:"裝置已取消註冊",unregisterError:"取消註冊裝置失敗",confirmTitle:"取消註冊 SpoolBuddy 裝置？",confirmBody:'將從資料庫中移除 "{{hostname}}" ({{deviceId}})。如果裝置線上，會在下次心跳時重新註冊自己。',ipAddress:"IP 位址",firmware:"韌體",lastSeen:"上次線上",daemonUptime:"守護程式執行時間",systemUptime:"系統執行時間",never:"從未",nfc:"NFC",scale:"磅秤",cpuTemp:"CPU 溫度",memory:"記憶體",disk:"磁碟",update:"更新",updateConfirmTitle:"更新 SpoolBuddy 守護程式？",updateConfirmBody:'對 "{{hostname}}" 觸發軟體更新？更新完成後守護程式將重新啟動。',restartBrowser:"重新啟動瀏覽器",restartBrowserConfirmTitle:"重新啟動 kiosk 瀏覽器？",restartBrowserConfirmBody:'在 "{{hostname}}" 上重新啟動 kiosk 瀏覽器？顯示將短暫黑屏。',restartDaemon:"重新啟動守護程式",restartDaemonConfirmTitle:"重新啟動 SpoolBuddy 守護程式？",restartDaemonConfirmBody:'在 "{{hostname}}" 上重新啟動 SpoolBuddy 守護程式？裝置將離線幾秒鐘。',reboot:"重新開機",rebootConfirmTitle:"重新開機？",rebootConfirmBody:'重新開機 "{{hostname}}"？裝置將離線約一分鐘。',shutdown:"關機",shutdownConfirmTitle:"關閉裝置？",shutdownConfirmBody:'關閉 "{{hostname}}"？您需要實體存取才能重新開機。',commandConfirm:"確認",commandQueued:"命令已加入佇列",commandError:"傳送命令失敗"},ldap:{title:"LDAP 認證",enabledDesc:"LDAP 認證已啟用",disabledDesc:"LDAP 認證已停用",disabledHint:"在下方設定並儲存 LDAP 設定，然後啟用。",enabled:"LDAP 認證已啟用",disabled:"LDAP 認證已停用",feature1:"使用者可以使用 LDAP 憑據登入",feature2:"本機管理員帳戶作為後備保留",feature3:"登入時 LDAP 群組對應到 BamBuddy 群組",serverConfig:"LDAP 伺服器設定",serverUrl:"伺服器 URL",serverUrlHint:"使用 ldap:// 進行標準連線或 ldaps:// 進行 SSL 連線",security:"安全",securityHint:"StartTLS 將普通連線升級為 TLS。LDAPS 從一開始就使用 TLS。",bindDn:"繫結 DN（服務帳戶）",bindPassword:"繫結密碼",searchBase:"搜尋基礎 DN",userFilter:"使用者搜尋過濾器",userFilterHint:"{username} 替換為登入使用者名稱。OpenLDAP 使用 (uid={username})。",autoProvision:"自動建立使用者",autoProvisionHint:"首次 LDAP 登入時自動建立 BamBuddy 帳戶",defaultGroup:"預設群組",defaultGroupNone:"— 無（無復原）—",defaultGroupHint:"當 LDAP 使用者透過身份驗證但不在任何已對應的 LDAP 群組中時分配的備援群組。留空以使未對應的使用者沒有權限。",groupMapping:"群組對應（JSON）",groupMappingHint:"將 LDAP 群組 DN 對應到 BamBuddy 群組。可用群組：",testConnection:"測試連線",settingsSaved:"LDAP 設定已儲存",errors:{serverRequired:"LDAP 伺服器 URL 為必填項",searchBaseRequired:"搜尋基礎 DN 為必填項",enableAuthFirst:"請先啟用認證",configureLdapFirst:"請先儲存 LDAP 設定"}},email:{smtpSettings:"SMTP 設定",smtpHost:"SMTP 伺服器",smtpPort:"SMTP 連接埠",security:"安全",authentication:"認證",username:"使用者名稱",password:"密碼",fromEmail:"寄件信箱",fromName:"寄件人名稱",testConnection:"測試 SMTP 連線",testRecipient:"測試收件信箱",sendTest:"傳送測試郵件",sending:"傳送中...",save:"儲存設定",saving:"儲存中...",advancedAuth:"進階認證",advancedAuthEnabled:"進階認證已啟用",advancedAuthEnabledDesc:"基於信箱的使用者管理功能已啟用。新使用者將透過郵件收到自動產生的密碼，使用者可以透過忘記密碼功能重設密碼。",advancedAuthDisabled:"進階認證已停用",advancedAuthDisabledDesc:"啟用進階認證以啟用基於信箱的使用者管理功能。",enable:"啟用",disable:"停用",feature1:"密碼自動產生並透過郵件傳送給新使用者",feature2:"使用者可以使用使用者名稱或信箱登入",feature3:"忘記密碼功能可用",feature4:"管理員可以透過郵件重設使用者密碼",errors:{requiredFields:"請填寫所有必填欄位",usernameRequired:"啟用認證時需要使用者名稱",enterTestEmail:"請輸入測試信箱地址",smtpServerAndEmail:"測試前請填寫 SMTP 伺服器和寄件信箱",usernamePasswordRequired:"啟用認證時需要使用者名稱和密碼",configureSmtpFirst:"請先設定並測試 SMTP 設定",enableAuthFirst:"請先啟用身份驗證才能使用基於電子郵件的功能。"},success:{settingsSaved:"SMTP 設定儲存成功"},securityOptions:{starttls:"STARTTLS（連接埠 587）",ssl:"SSL/TLS（連接埠 465）",none:"無（連接埠 25）"},authOptions:{enabled:"已啟用",disabled:"已停用"}},appearance:"外觀",notifications:"通知",smartPlugs:"智慧插座",spoolman:"Spoolman",updates:"更新",language:"語言",languageDescription:"選擇您的首選語言",theme:"主題",themeLight:"淺色",themeDark:"深色",themeSystem:"跟隨系統",defaultView:"預設檢視",defaultViewDescription:"開啟應用程式時顯示的頁面",checkForUpdates:"檢查更新",autoUpdate:"自動更新",currentVersion:"目前版本",latestVersion:"最新版本",upToDate:"已是最新版本",updateAvailable:"有可用更新",notificationLanguage:"通知語言",notificationLanguageDescription:"推送通知的語言",bedCooledThreshold:"熱床冷卻閾值",bedCooledThresholdDescription:"列印後熱床被視為已冷卻的溫度",userNotificationsEnabled:"使用者通知",userNotificationsEnabledDescription:"啟用使用者通知選單和列印任務事件的郵件通知。需要進階身份驗證。",userNotificationsDisabledHint:"請啟用進階身份驗證以使用使用者通知。",notificationProviders:"通知提供者",addProvider:"新增提供者",editProvider:"編輯提供者",providerType:"提供者類型",testNotification:"測試通知",testSuccess:"測試通知傳送成功",testFailed:"傳送測試通知失敗",quietHours:"免打擾時間",quietHoursDescription:"在此時間段內不傳送通知",quietHoursStart:"開始",quietHoursEnd:"結束",events:{title:"通知事件",printStart:"列印開始",printComplete:"列印完成",printFailed:"列印失敗",printStopped:"列印停止",printProgress:"進度里程碑",printProgressDescription:"在 25%、50%、75% 時通知",printerOffline:"印表機離線",printerError:"印表機錯誤",filamentLow:"耗材不足",maintenanceDue:"維護到期",maintenanceDueDescription:"需要維護時通知"},smartPlug:{title:"智慧插座",add:"新增智慧插座",edit:"編輯智慧插座",name:"名稱",ipAddress:"IP 位址",linkedPrinter:"連結印表機",autoOn:"自動開啟",autoOnDescription:"列印開始時開啟",autoOff:"自動關閉",autoOffDescription:"列印完成後關閉",offDelay:"關閉延遲",offDelayMinutes:"列印後分鐘數",offDelayTemp:"當噴嘴溫度低於",currentState:"目前狀態",turnOn:"開啟",turnOff:"關閉"},filamentTracking:"耗材追蹤",filamentTrackingDesc:"選擇如何追蹤您的耗材。您可以使用內建庫存或連線外部 Spoolman 伺服器。",filamentChecks:"耗材檢查",disableFilamentWarnings:"停用耗材警告",disableFilamentWarningsDesc:"在列印或加入佇列時不顯示耗材不足警告",preferLowestFilament:"優先使用剩餘最少的耗材",preferLowestFilamentDesc:"當多個料盤匹配時，使用剩餘耗材最少的那個",trackingModeBuiltIn:"內建庫存",trackingModeBuiltInDesc:"包含 RFID 自動匹配和用量追蹤",trackingModeSpoolmanDesc:"外部耗材管理伺服器",builtInFeatureRfid:"自動檢測 AMS 中的拓竹 RFID 耗材",builtInFeatureUsage:"追蹤每次列印的耗材消耗",builtInFeatureCatalog:"管理耗材、顏色和 K 值設定檔案",builtInFeatureThirdParty:"第三方耗材可分配到庫存耗材",amsSyncButton:"從 AMS 同步重量",amsSyncTitle:"從 AMS 同步耗材重量",amsSyncMessage:"這將使用已連線印表機的目前 AMS 剩餘百分比值覆蓋所有庫存耗材重量。用於從損壞的重量資料中恢復。印表機必須線上。",amsSyncing:"同步中...",amsSyncSuccess:"已同步 {{synced}} 個耗材，跳過 {{skipped}} 個",amsSyncError:"從 AMS 同步重量失敗",spoolmanUrl:"Spoolman URL",spoolmanUrlHint:"Spoolman 伺服器的 URL（例如 http://localhost:7912）",spoolmanConnected:"已連線",spoolmanDisconnected:"未連線",status:"狀態",connect:"連線",disconnect:"斷開",howSyncWorks:"同步工作原理",syncInfoRfidOnly:"僅同步帶有 RFID 的官方拓竹耗材",syncInfoAutoCreate:"首次同步時自動在 Spoolman 中建立新耗材",syncInfoThirdPartySkipped:"非拓竹耗材（第三方、重新填充的）將被跳過",linkingExistingSpools:"連結現有耗材",linkingExistingSpoolsDesc:'要將現有的 Spoolman 耗材連結到您的 AMS，請將滑鼠懸停在 AMS 槽位上並點選"連結到 Spoolman"。',syncMode:"同步模式",syncModeAuto:"自動",syncModeManual:"僅手動",syncModeAutoDesc:"偵測到更改時自動同步 AMS 資料",syncModeManualDesc:"僅在手動觸發時同步",syncAmsData:"同步 AMS 資料",syncAmsDataDesc:"手動將印表機 AMS 資料同步到 Spoolman",allPrinters:"所有印表機",noDefaultPrinter:"無預設（每次詢問）",sidebarOrder:"側邊欄順序",saveThumbnails:"儲存縮圖",captureFinishPhoto:"拍攝完成照片",noPrintersConfigured:"未設定印表機",archiveMode:{always:"始終建立歸檔條目",never:"從不建立歸檔條目",ask:"每次詢問"},checkForUpdatesLabel:"檢查更新",checkPrinterFirmware:"檢查印表機韌體",includeBetaUpdates:"包含測試版本",includeBetaUpdatesDesc:"檢查更新時通知測試版和預發布版本",enableRetry:"啟用重試",homeAssistantDescription:"透過 Home Assistant 控制智慧插座",environmentManagedLabel:"（環境變數管理）",autoEnabledViaEnv:"透過環境變數自動啟用",urlFromEnvReadOnly:"值由 HA_URL 環境變數設定（只讀）",tokenFromEnvReadOnly:"值由 HA_TOKEN 環境變數設定（只讀）",mqttConnectedTo:"已連線到",prometheusDescription:"以 Prometheus 格式暴露印表機資料",noSmartPlugsTitle:"未設定智慧插座",noSmartPlugsDescription:"新增基於 Tasmota 的智慧插座以追蹤能耗並自動化電源控制。",noProvidersTitle:"未設定提供者",noProvidersDescription:"新增提供者以接收警報。",noTemplatesAvailable:"無可用範本。重新啟動後端以載入預設範本。",apiPermissionView:"檢視印表機狀態和佇列",apiPermissionEdit:"新增和移除列印佇列中的項目",apiKeysEmptyTitle:"無 API 金鑰",apiKeysEmptyDescription:"建立 API 金鑰以與外部服務整合。",noUsersFound:"未找到使用者",noGroupsFound:"未找到群組",noGroupsAvailable:"無可用群組",passwordsDoNotMatch:"密碼不符",systemGroupWarning:"系統群組名稱不可更改",authDisabledTitle:"身份驗證已停用",authDisabledFeature1:"需要登入才能存取系統",authDisabledFeature2:"建立多個使用者並基於群組的權限管理",authDisabledFeature3:"使用 50+ 個細粒度權限控制存取",userHasCreated:"此使用者已建立：",userItemsQuestion:"您想如何處理這些項目？",deleteUserConfirm:"確定要刪除此使用者嗎？",actionCannotBeUndone:"此操作無法復原。",addFirstSmartPlug:"新增您的第一個智慧插座",providers:"提供者",log:"日誌",testAll:"全部測試",testResults:"測試結果",testPassedCount:"{{count}} 個透過",testFailedCount:"{{count}} 個失敗",messageTemplates:"訊息範本",messageTemplatesDescription:"自訂每個事件的通知訊息。",apiKeys:"API 金鑰",apiKeysDescription:"建立 API 金鑰用於外部整合和 Webhook。",createKey:"建立金鑰",apiKeyCreated:"API 金鑰建立成功",apiKeyCopyWarning:"請立即複製此金鑰 - 它不會再次顯示！",useInApiBrowser:"在 API 瀏覽器中使用",createNewApiKey:"建立新 API 金鑰",keyName:"金鑰名稱",keyNamePlaceholder:"例如：Home Assistant、OctoPrint",readStatus:"讀取狀態",readStatusDescription:"檢視印表機狀態和佇列",manageQueue:"管理佇列",manageQueueDescription:"新增和移除列印佇列中的項目",controlPrinter:"控制印表機",controlPrinterDescription:"暫停、繼續和停止列印",unnamedKey:"未命名金鑰",lastUsed:"上次使用",read:"讀取",control:"控制",createFirstKey:"建立您的第一個金鑰",webhookEndpoints:"Webhook 端點",webhookApiKeyHint:"在 X-API-Key 請求頭中使用您的 API 金鑰。",webhook:{getAllStatus:"獲取所有印表機狀態",getSpecificStatus:"獲取特定印表機狀態",addToQueue:"新增到列印佇列",pausePrint:"暫停列印",resumePrint:"繼續列印",stopPrint:"停止列印"},apiBrowser:"API 瀏覽器",apiBrowserDescription:"瀏覽和測試所有可用的 API 端點。",apiKeyForTesting:"測試用 API 金鑰",apiKeyPlaceholder:"在此貼上您的 API 金鑰以測試需要認證的端點...",apiKeyHint:"此金鑰將作為 X-API-Key 請求頭隨請求傳送。",deleteApiKeyTitle:"刪除 API 金鑰",deleteApiKeyMessage:"確定要刪除此 API 金鑰嗎？使用此金鑰的所有整合將停止工作。",deleteKey:"刪除金鑰",amsDisplayThresholds:"AMS 顯示閾值",amsThresholdsDescription:"設定 AMS 濕度和溫度指示器的顏色閾值。",humidity:"濕度",goodGreen:"良好（綠色）",fairOrange:"一般（橙色）",aboveFairBad:"超過一般閾值顯示為紅色（差）",fairAlsoDryingThreshold:"此閾值也用於觸發自動乾燥",temperature:"溫度",goodBlue:"良好（藍色）",aboveFairHot:"超過一般閾值顯示為紅色（熱）",historyRetention:"歷史保留",keepSensorHistory:"保留感測器歷史",historyRetentionDescription:"較舊的濕度和溫度資料將被自動刪除",defaultPrintOptions:"預設列印選項",defaultPrintOptionsDescription:"設定新列印的預設選項值。可在列印對話方塊中逐次覆蓋。",defaultBedLevelling:"熱床調平",defaultBedLevellingDesc:"列印前自動調平熱床",defaultFlowCali:"流量校準",defaultFlowCaliDesc:"校準擠出流量",defaultVibrationCali:"振動校準",defaultVibrationCaliDesc:"減少振紋偽影",defaultLayerInspect:"首層檢測",defaultLayerInspectDesc:"AI首層檢測",defaultTimelapse:"縮時攝影",defaultTimelapseDesc:"錄製縮時攝影影片",staggeredStart:"錯開啟動",staggeredStartDescription:"多台印表機批次啟動時的預設群組大小與間隔。可在列印對話框中逐批覆寫。",plateClear:"熱床清空確認",requirePlateClear:"需要熱床清空確認",requirePlateClearDescription:"啟用後，排程器會在已完成列印的印表機上啟動佇列列印之前，等待每臺印表機的熱床清空確認。停用後，也會隱藏印表機卡片上的列印板狀態標記和「將列印板標記為已清理」按鈕。",gcodeInjection:"G-code注入",gcodeInjectionDescription:'為Farmloop、SwapMod、AutoClear和Printflow 3D等自動列印系統設定自訂G-code，在列印開始和/或結束時注入。程式碼片段按印表機型號設定，在佇列項目上啟用"注入G-code"時套用。',gcodeInjectionNoPrinters:"未找到印表機。新增印表機以設定G-code程式碼片段。",gcodeStartLabel:"開始G-code",gcodeEndLabel:"結束G-code",gcodeStartPlaceholder:"在列印開始前插入的G-code...",gcodeEndPlaceholder:"在列印結束後追加的G-code...",staggerGroupSize:"群組大小",staggerGroupSizeHelp:"每個群組要同時啟動的印表機數量",staggerInterval:"間隔（分鐘）",staggerIntervalHelp:"每個群組啟動之間的延遲",queueDrying:"自動乾燥",queueDryingDescription:"在佇列列印之間，印表機空閒時自動乾燥AMS耗材。使用上方的濕度閾值觸發乾燥。",queueDryingEnabled:"啟用自動乾燥",queueDryingEnabledDescription:"當印表機空閒且濕度超過閾值時，自動啟動AMS乾燥",queueDryingBlock:"等待乾燥完成",queueDryingBlockDescription:"阻止列印佇列直到乾燥完成。關閉時，列印優先於乾燥。",ambientDryingEnabled:"環境乾燥",ambientDryingEnabledDescription:"當空閒印表機的濕度超過閾值時自動乾燥耗材，無需佇列列印。",dryingPresets:"乾燥預設",dryingPresetsDescription:"每種耗材類型的溫度和時長。AMS 2 Pro使用較低溫度，AMS-HT支援較高溫度。",dryingFilament:"耗材",printModal:"列印對話方塊",expandCustomMapping:"預設展開自訂對應",expandCustomMappingDescription:"列印到多臺印表機時，預設展開顯示每臺印表機的 AMS 對應",authentication:"身份驗證",authEnabledDescription:"您的實例已透過使用者身份驗證保護",authDisabledDescription:"啟用以要求登入並管理使用者存取",authDisabledMessage:"啟用身份驗證以建立使用者帳戶、管理權限並保護您的 Bambuddy 實例。",enableAuthentication:"啟用身份驗證",currentUser:"目前使用者",changePassword:"修改密碼",admin:"管理員",users:"使用者",addUser:"新增使用者",groups:"群組",addGroup:"新增群組",system:"系統",noDescription:"無描述",userCount:"{{count}} 個使用者",permissionCount:"{{count}} 個權限",createUser:"建立使用者",username:"使用者名稱",enterUsername:"輸入使用者名稱",password:"密碼",enterPassword:"輸入密碼（至少 6 個字元）",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"確認密碼",viewReleaseOnGitHub:"在 GitHub 上檢視發布",turnAllPlugsOn:"開啟所有插座",turnAllPlugsOff:"關閉所有插座",clearNotificationLogs:"清除通知日誌",clearLogsMessage:"這將永久刪除所有 30 天前的通知日誌。此操作無法復原。",clearLogs:"清除日誌",resetUiPreferences:"重設 UI 偏好",resetUiPreferencesMessage:"這將重設所有 UI 偏好為預設值：側邊欄順序、主題、儀表板佈局、檢視模式和排序偏好。您的印表機、歸檔和伺服器設定不會受到影響。清除後頁面將重新載入。",resetPreferences:"重設偏好",deleteGroupTitle:"刪除群組",deleteGroupMessage:"確定要刪除此群組嗎？此群組中的使用者將失去這些權限。",deleteGroup:"刪除群組",disableAuthenticationTitle:"停用身份驗證",disableAuthenticationMessage:"確定要停用身份驗證嗎？這將使您的 Bambuddy 實例無需登入即可存取。所有使用者將保留在資料庫中但身份驗證將被停用。",disableAuthentication:"停用身份驗證",configureBambuddy:"設定 Bambuddy",systemDefault:"系統預設",archiveSettings:"歸檔設定",newWindow:"新視窗",embeddedOverlay:"嵌入式疊加層",preferredSlicer:"首選切片軟體",preferredSlicerDescription:"選擇要用於開啟檔案的切片軟體",orcaslicerKnownIssuesWarning:"OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.",useSlicerApi:"Use Slicer API",useSlicerApiDescription:'When on, "Slice" actions open the in-app slicer modal and call the slicer-API sidecar. When off (default), they hand off to the desktop slicer via URI scheme.',slicerCard:"Slicer",orcaslicerApiUrl:"OrcaSlicer sidecar URL",bambuStudioApiUrl:"Bambu Studio sidecar URL",slicerApiUrlDescription:"URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.",externalCameras:"外部攝影機",costTracking:"成本追蹤",printsOnly:"僅列印",totalConsumption:"總消耗",dataManagement:"資料管理",storageUsage:"儲存使用情況",storageUsageDescription:"按類別的資料使用情況明細",storageUsageTotal:"總計",storageUsageErrors:"錯誤",storageUsageOtherBreakdown:"其他（包括靜態資源、腳本和設定檔案）",storageUsageSystem:"系統",storageUsageData:"資料",storageUsageUnavailable:"儲存使用資訊不可用",clearNotificationLogsDescription:"刪除 30 天前的通知日誌",resetUiPreferencesDescription:"重設側邊欄順序、主題、檢視模式和佈局偏好。印表機、歸檔和設定不受影響。",enableHomeAssistant:"啟用 Home Assistant",enableMqtt:"啟用 MQTT",useTls:"使用 TLS",enableMetricsEndpoint:"啟用指標端點",availableMetrics:"可用指標",editUser:"編輯使用者",deleteUserTitle:"刪除使用者",groupName:"群組名稱",leaveEmptyForAnonymous:"留空為匿名",leaveEmptyForNoAuth:"留空為無認證",enterNewPassword:"輸入新密碼",confirmNewPassword:"確認新密碼",enterGroupName:"輸入群組名稱",enterDescriptionOptional:"輸入描述（可選）",enterCurrentPassword:"輸入目前密碼",enterNewPasswordMin6:"輸入新密碼（至少 6 個字元）",toast:{keyCopied:"金鑰已複製到剪貼簿",copyFailed:"複製金鑰失敗",keyAddedToBrowser:"金鑰已新增到 API 瀏覽器",clearLogsFailed:"清除日誌失敗",uiPreferencesReset:"UI 偏好已重設。重新整理中...",authDisabled:"身份驗證已成功停用",authDisableFailed:"停用身份驗證失敗",apiKeyCreated:"API 金鑰已建立",apiKeyDeleted:"API 金鑰已刪除",userCreated:"使用者建立成功",userUpdated:"使用者更新成功",userDeleted:"使用者刪除成功",groupCreated:"群組建立成功",groupUpdated:"群組更新成功",groupDeleted:"群組刪除成功",fillRequiredFields:"請填寫所有必填欄位",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元",enterGroupName:"請輸入群組名稱",settingsSaved:"設定已儲存",noPermissionUpdate:"您沒有權限變更設定",cameraSettingsSaved:"攝影機設定已儲存",enterCameraUrl:"請輸入攝影機 URL",passwordChanged:"密碼修改成功",connectionFailed:"連線失敗",testFailed:"測試失敗",cameraConnected:"攝影機已連線{{resolution}}"},testConnection:"測試連線",catalog:{spoolCatalog:"耗材目錄",spoolCatalogDescription:"按品牌/類型的空耗材重量。用於新增耗材時的自動重量查詢。",searchCatalog:"搜尋目錄...",addNewEntry:"新增新條目",namePlaceholder:"名稱（例如：Bambu Lab - 塑膠）",weight:"重量",type:"類型",default:"預設",custom:"自訂",noMatch:"沒有條目匹配您的搜尋",empty:"目錄中沒有條目",deleteEntry:"刪除條目",deleteConfirm:'確定要刪除"{{name}}"嗎？',resetCatalog:"重設目錄",resetConfirm:"重設目錄為預設值？這將移除所有自訂條目。",loadFailed:"載入耗材目錄失敗",nameWeightRequired:"名稱和重量為必填項",entryAdded:"條目已新增",addFailed:"新增條目失敗",entryUpdated:"條目已更新",updateFailed:"更新條目失敗",entryDeleted:"條目已刪除",deleteFailed:"刪除條目失敗",resetSuccess:"目錄已重設為預設值",resetFailed:"重設目錄失敗",exported:"已匯出 {{count}} 條",imported:"已匯入 {{added}} 條（跳過 {{skipped}} 條）",importFailed:"匯入失敗：無效的 JSON 格式",exportTooltip:"匯出目錄為 JSON",importTooltip:"從 JSON 匯入目錄",resetTooltip:"重設為預設值",selectedCount:"已選擇 {{count}} 項",deleteSelected:"刪除所選",bulkDeleteConfirm:"確定要刪除 {{count}} 個條目嗎？",bulkDeleted:"已刪除 {{count}} 個條目",bulkDeleteFailed:"刪除條目失敗"},colorCatalog:{title:"顏色目錄",description:"按製造商/材料的耗材顏色。用於新增耗材時的自動顏色查詢。",searchColors:"搜尋顏色...",allManufacturers:"所有製造商",addNewColor:"新增新顏色",manufacturer:"製造商",colorName:"顏色名稱",hex:"十六進位",materialOptional:"材料（可選）",showing:"顯示 {{filtered}} / {{total}} 種顏色",noMatch:"沒有顏色匹配您的搜尋",empty:"目錄中沒有顏色",deleteColor:"刪除顏色",deleteConfirm:'確定要刪除"{{name}}"嗎？',resetCatalog:"重設顏色目錄",resetConfirm:"重設目錄為預設值？這將移除所有自訂顏色。",sync:"同步",starting:"啟動中...",syncTooltip:"從 FilamentColors.xyz 同步（2000+ 種顏色，可能需要一分鐘）",loadFailed:"載入顏色目錄失敗",fieldsRequired:"製造商、顏色名稱和十六進位顏色為必填項",colorAdded:"顏色已新增",addFailed:"新增顏色失敗",colorUpdated:"顏色已更新",updateFailed:"更新顏色失敗",colorDeleted:"顏色已刪除",deleteFailed:"刪除顏色失敗",resetSuccess:"顏色目錄已重設為預設值",resetFailed:"重設目錄失敗",syncUpToDate:"已是最新（檢查了 {{count}} 種顏色）",syncComplete:"新增了 {{added}} 種新顏色（{{skipped}} 種已存在）",syncError:"同步錯誤",syncFailed:"從 FilamentColors.xyz 同步失敗",exported:"已匯出 {{count}} 種顏色",imported:"已匯入 {{added}} 種顏色（跳過 {{skipped}} 種）",importFailed:"匯入失敗：無效的 JSON 格式",selectedCount:"已選擇 {{count}} 項",deleteSelected:"刪除所選",bulkDeleteConfirm:"確定要刪除 {{count}} 種顏色嗎？",bulkDeleted:"已刪除 {{count}} 種顏色",bulkDeleteFailed:"刪除顏色失敗"},dateFormat:"日期格式",dateFormatUs:"美式 (MM/DD/YYYY)",dateFormatEu:"歐式 (DD/MM/YYYY)",dateFormatIso:"ISO (YYYY-MM-DD)",timeFormat:"時間格式",timeFormat12:"12小時制 (3:30 PM)",timeFormat24:"24小時制 (15:30)",defaultPrinter:"預設印表機",defaultPrinterDescription:"為上傳、重印和其他操作預選此印表機。",slicerBambuStudio:"Bambu Studio",slicerOrcaSlicer:"OrcaSlicer",sidebarOrderDescription:"拖曳側邊欄項目以重新排序。在此處重設為預設順序。",setDefault:"設為預設",sidebarOrderSetDefaultHint:"設為預設將目前選單順序套用於尚未自訂的使用者。",sidebarDefaultSet:"已設定預設選單順序。",sidebarDefaultCleared:"已清除預設選單順序。",sidebarDefaultFailed:"設定預設選單順序失敗。",reset:"重設",darkMode:"深色模式",lightMode:"淺色模式",active:"(目前)",background:"背景",accent:"強調色",style:"樣式",bgNeutral:"中性",bgWarm:"暖色",bgCool:"冷色",bgOled:"OLED 純黑",bgSlate:"石板藍",bgForest:"森林綠",accentGreen:"綠色",accentTeal:"青色",accentBlue:"藍色",accentOrange:"橙色",accentPurple:"紫色",accentRed:"紅色",styleClassic:"經典",styleGlow:"發光",styleVibrant:"鮮豔",themeToggleHint:"使用側邊欄中的太陽/月亮圖示在深色和淺色模式之間切換。",autoArchivePrints:"自動歸檔列印",autoArchiveDescription:"列印完成時自動儲存3MF檔案",saveThumbnailsDescription:"從3MF檔案中提取並儲存預覽影像",captureFinishPhotoDescription:"列印完成時從印表機攝影機拍照",ffmpegNotInstalled:"未安裝ffmpeg",ffmpegRequired:"攝影機捕獲需要ffmpeg。透過 <brew>brew install ffmpeg</brew>（macOS）或 <apt>apt install ffmpeg</apt>（Linux）安裝。",camera:"攝影機",cameraViewMode:"攝影機檢視模式",cameraOverlayDescription:"攝影機在主螢幕上以可調大小的覆蓋層開啟",cameraWindowDescription:"攝影機在單獨的瀏覽器視窗中開啟",externalCamerasDescription:"設定外部攝影機以替換內建印表機攝影機。支援MJPEG流、RTSP、HTTP快照和USB攝影機（V4L2）。啟用後，外部攝影機將用於即時檢視和完成照片。",cameraPlaceholderUsb:"裝置路徑 (/dev/video0)",cameraPlaceholderUrl:"攝影機URL (rtsp://... 或 http://...)",cameraTypeMjpeg:"MJPEG 流",cameraTypeRtsp:"RTSP 流",cameraTypeSnapshot:"HTTP 快照",cameraTypeUsb:"USB 攝影機 (V4L2)",cameraRotation:"旋轉",test:"測試",connected:"已連線",disconnected:"未連線",currency:"貨幣",defaultFilamentCost:"預設耗材成本（每公斤）",electricityCost:"每千瓦時電費",energyDisplayMode:"能源顯示模式",energyModePrintDescription:"儀表板顯示列印期間使用的能源總和",energyModeTotalDescription:"儀表板顯示智慧插座的累計能源",fileManager:"檔案管理器",createArchiveEntry:"列印時建立歸檔條目",createArchiveEntryDescription:"從檔案管理器列印時，可選擇建立歸檔條目",lowDiskSpaceWarning:"磁碟空間不足警告",lowDiskSpaceDescription:"當可用磁碟空間低於此閾值時顯示警告",printerFirmware:"印表機韌體",checkFirmwareDescription:"檢查Bambu Lab的印表機韌體更新",bambuddySoftware:"Bambuddy 軟體",autoCheckDescription:"啟動時自動檢查新版本",checkNow:"立即檢查",updateAvailableVersion:"可用更新：v{{version}}",releaseNotes:"發布說明",updateViaDocker:"透過 Docker Compose 更新：",updateViaHomeAssistant:"更新由 Home Assistant Supervisor 管理。請在 Home Assistant 中開啟 設定 → 附加元件 → Bambuddy 以安裝新版本。",installUpdate:"安裝更新",latestVersionRunning:"您正在執行最新版本",failedToCheckUpdates:"檢查更新失敗：{{error}}",backupRestore:"備份與恢復",backupRestoreDescription:"匯出/匯入設定並設定GitHub 備份",goToBackup:"前往備份",externalUrl:"外部URL",externalUrlDescription:"Bambuddy可存取的外部URL。用於通知影像和外部整合。",bambuddyUrl:"Bambuddy URL",externalUrlHint:"包含協定和連接埠（例如：http://192.168.1.100:8000）",ftpRetry:"FTP重試",ftpRetryDescription:"當印表機Wi-Fi 不穩定時重試FTP操作。適用於3MF下載、列印上傳、縮時攝影下載和韌體更新。",autoRetryDescription:"自動重試失敗的FTP操作",retryAttempts:"重試次數",retryDelay:"重試延遲",connectionTimeout:"連線超時",time_one:"{{count}} 次",time_other:"{{count}} 次",second_one:"{{count}} 秒",second_other:"{{count}} 秒",nSeconds:"{{count}} 秒",increaseForWeakWifi:"對Wi-Fi 訊號弱的印表機增加此值",homeAssistant:"Home Assistant",homeAssistantFullDescription:"連線到Home Assistant，透過HA REST API控制智慧插座。支援switch、light、input_boolean和script實體。",homeAssistantUrl:"Home Assistant URL",longLivedAccessToken:"長期存取權杖",haTokenHint:"在HA中建立權杖：個人資料 → 長期存取權杖 → 建立權杖",connectionSuccessful:"連線成功",connectionFailed:"連線失敗",haConnectionSuccess:"已成功連線到Home Assistant。",haConnectionFailed:"連線Home Assistant失敗。",mqttPublishing:"MQTT發布",mqttDescription:"將BamBuddy事件發布到外部MQTT代理，用於與Node-RED、Home Assistant和其他自動化系統整合。",mqttEnableDescription:"向外部MQTT代理發布事件",brokerHostname:"代理主機名稱",port:"連接埠",usernameOptional:"使用者名稱（可選）",passwordOptional:"密碼（可選）",topicPrefix:"主題前綴",topicPrefixHint:"主題格式：{{prefix}}/printers/<serial>/status 等",prometheusMetrics:"Prometheus 指標",prometheusEndpointDescription:"在 <code>/api/v1/metrics</code> 公開印表機指標，用於Prometheus/Grafana監控。",bearerTokenOptional:"Bearer權杖（可選）",bearerTokenHint:"設定後，請求必須包含 <code>Authorization: Bearer <token></code>",metricsConnectionStatus:"連線狀態",metricsPrinterState:"印表機狀態（空閒/列印中等）",metricsPrintProgress:"列印進度 0-100%",metricsBedTemp:"熱床溫度",metricsNozzleTemp:"噴嘴溫度",metricsPrintsTotal:"按結果分類的總列印數",metricsMore:"...以及更多（層數、風扇、佇列、耗材用量）",smartPlugsDescription:"連線智慧插座（Tasmota或Home Assistant）以自動化電源控制並追蹤印表機的能源使用情況。",allOn:"全部開啟",allOff:"全部關閉",addSmartPlug:"新增智慧插座",energySummary:"能源概要",currentPower:"目前功率",plugsOnline:"{{reachable}}/{{total}} 個插座線上",today:"今天",yesterday:"昨天",total:"總計",enablePlugsForSummary:"啟用插座以檢視能源概要",addNotificationProvider:"新增",systemBadge:"(系統)",creating:"建立中...",changing:"修改中...",deleteUserAndItems:"刪除使用者及其所有項目",deleteUserKeepItems:"刪除使用者，保留項目（將變為無主項目）",ok:"確定",twoFa:{totpTitle:"身份驗證器 App (TOTP)",totpDesc:"使用 Google Authenticator、Aegis 或 Authy 等 App。",emailOtpTitle:"郵件 OTP",emailOtpDesc:"登入時向 {{email}} 傳送一次性驗證碼。",emailOtpNoEmail:"請先為帳戶新增信箱地址以啟用此方式。",addEmailFirst:"您的帳戶沒有信箱地址，請聯絡管理員新增。",setupTotp:"設定身份驗證器 App",setupAuthApp:"設定身份驗證器 App",setupInstructions:"使用身份驗證器 App 掃描QR Code，然後輸入驗證碼確認。",manualEntry:"無法掃描？請手動輸入此金鑰：",scannedContinue:"已掃描 — 繼續",enterCodeToConfirm:"請輸入身份驗證器 App 中的6位驗證碼以確認設定。",activate:"啟用",disableTotp:"停用身份驗證器",disableConfirmHint:"請輸入有效的 TOTP 碼或備用碼來停用身份驗證器。",totpDisabled:"身份驗證器 App 已停用。",emailOtpEnabled:"郵件 OTP 已啟用。",emailOtpDisabled:"郵件 OTP 已停用。",smtpRequired:"請先設定並測試SMTP設定。",invalidCode:"無效驗證碼，請重試。",enableEmailOtp:"啟用郵件 OTP",disableEmailOtp:"停用郵件 OTP",emailSetupEnterCode:"驗證碼已傳送至您的信箱地址。請在下方輸入以確認您擁有此信箱。",verifyAndEnable:"驗證並啟用",emailDisablePasswordHint:"請輸入您的帳戶密碼以確認停用郵件 OTP。",passwordPlaceholder:"輸入您的密碼",backupCodesTitle:"儲存備用碼",backupCodesWarning:"請將這些碼儲存在安全的地方。每個碼只能使用一次，且不會再次顯示。",backupCodesRemaining:"剩餘 {{count}} 個備用碼",savedCodes:"已儲存",regenBackup:"重新產生備用碼",regenBackupHint:"輸入目前 TOTP 碼以產生 10 個新備用碼，所有現有備用碼將失效。",newBackupCodes:"新備用碼",linkedAccounts:"已連結的 SSO 帳戶",linkedAccountsDesc:"以下外部身份提供者已與您的帳戶連結。",oidcUnlinked:"帳戶已解除連結。"},oidc:{title:"SSO / OIDC 提供者",desc:"設定 OpenID Connect 提供者以實現單點登入。",addProvider:"新增提供者",newProvider:"新提供者",empty:"尚未設定 OIDC 提供者。",created:"提供者已建立。",updated:"提供者已更新。",deleted:"提供者已刪除。",deleteTitle:"刪除提供者",deleteMessage:'刪除"{{name}}"？所有連結帳戶將斷開連線。',form:{name:"顯示名稱",issuerUrl:"頒發者 URL",clientId:"客戶端 ID",clientSecret:"客戶端金鑰",scopes:"作用域",iconUrl:"圖示 URL（可選）",enabled:"已啟用",autoCreate:"自動建立使用者",autoCreateDesc:"首次登入時自動建立本機帳戶。",autoLink:"自動連結已有帳戶",autoLinkDesc:"首次登入時透過信箱匹配現有本機帳戶並自動連結。",emailClaim:"電子郵件聲明",emailClaimDesc:"用作電子郵件身份的 JWT 聲明。Azure Entra ID 請使用 'preferred_username' 或 'upn'（不發送 email_verified）。僅使用可信的聲明名稱。",emailClaimPlaceholder:"email",emailClaimCustomClaimAutoLinkWarning:"Custom claims are safe for auto-link only when the value is tenant-administered (e.g. Azure Entra ID upn / preferred_username). Do not enable auto-link if your IdP allows users to self-assert this claim.",requireEmailVerified:"要求電子郵件已驗證",requireEmailVerifiedDesc:"僅在提供商將電子郵件聲明標記為已驗證時才接受。",requireEmailVerifiedWarning:"警告：將在未經驗證的情況下接受電子郵件。僅對受信任的提供商使用。",requireEmailVerifiedAutoLink:"請先停用自動連結以變更此設定。",secretHint:"留空以保留目前",secretPlaceholder:"新金鑰"}}},notification:{printStarted:{title:"列印已開始",body:"{{printer}}：{{filename}} 已開始列印"},printCompleted:{title:"列印已完成",body:"{{printer}}：{{filename}} 已成功完成"},printFailed:{title:"列印失敗",body:"{{printer}}：{{filename}} 列印失敗"},printStopped:{title:"列印已停止",body:"{{printer}}：{{filename}} 已停止"},printProgress:{title:"列印進度",body:"{{printer}}：{{filename}} 已完成 {{percent}}%"},printerOffline:{title:"印表機離線",body:"{{printer}} 已離線"},printerError:{title:"印表機錯誤",body:"{{printer}}：{{error}}"},filamentLow:{title:"耗材不足",body:"{{printer}}：耗材即將用完"},maintenanceDue:{title:"維護到期",body:"{{printer}}：{{items}} 需要關注"}},errors:{generic:"出了點問題",networkError:"網路錯誤。請檢查您的連線。",notFound:"未找到",unauthorized:"未授權",serverError:"伺服器錯誤",validationError:"請檢查您的輸入",printerConnectionFailed:"連線印表機失敗",saveFailed:"儲存更改失敗",deleteFailed:"刪除失敗",loadFailed:"載入資料失敗"},hmsErrors:{title:"錯誤 - {{name}}",noErrors:"無錯誤",viewOnWiki:"在拓竹 Wiki 上檢視",clearInstructions:"在印表機上清除錯誤以在此處消除它們。",clearErrors:"清除錯誤",clearSuccess:"HMS 錯誤已清除",clearFailed:"清除 HMS 錯誤失敗"},mqttDebug:{title:"MQTT 偵錯日誌",searchPlaceholder:"搜尋主題或負載...",noMessages:"尚未紀錄訊息",startLoggingHint:'點選"開始紀錄"以開始捕獲 MQTT 訊息',noMessagesMatch:"沒有訊息匹配您的篩選條件",adjustFilterHint:"嘗試調整您的搜尋或篩選條件",incoming:"傳入",outgoing:"傳出",loggingStopped:"紀錄已停止",loggingActive:"紀錄中 - 訊息將自動重新整理",startLogging:"開始紀錄",stopLogging:"停止紀錄",clearLog:"清除日誌",topic:"主題",timestamp:"時間戳",direction:"方向",all:"全部"},printerFiles:{title:"檔案管理器",storageUsed:"已用：",storageFree:"剩餘：",filterPlaceholder:"篩選檔案...",deleteButton:"刪除",deleteFiles:"刪除 {{count}} 個檔案",deleteFileConfirm:'刪除"{{name}}"？此操作無法復原。',deleteFilesConfirm:"刪除 {{count}} 個選中的檔案？此操作無法復原。",noFiles:"印表機上沒有檔案",loadingFiles:"載入檔案中...",failedToLoad:"載入檔案失敗",toast:{filesDeleted:"已刪除 {{count}} 個檔案",deleteFailed:"刪除失敗：{{error}}"}},confirm:{delete:"確定要刪除嗎？",unsavedChanges:"您有未儲存的更改。確定要離開嗎？",clearQueue:"確定要清空佇列嗎？"},login:{title:"Bambuddy 登入",subtitle:"登入您的帳戶",username:"使用者名稱",usernamePlaceholder:"輸入您的使用者名稱",usernameOrEmail:"使用者名稱或信箱",usernameOrEmailPlaceholder:"使用者名稱或 @ 信箱",password:"密碼",passwordPlaceholder:"輸入您的密碼",signIn:"登入",signingIn:"登入中...",rememberMe:"記住我",forgotPassword:"忘記密碼？",loginSuccess:"登入成功",loginFailed:"登入失敗",enterCredentials:"請輸入使用者名稱和密碼",enterEmail:"請輸入您的電子郵件地址",oidcLoginFailed:"OIDC 登入失敗",oidcErrors:{providerError:"身份提供者返回了一個錯誤",missingParameters:"OIDC 回呼缺少必要引數",invalidState:"OIDC 狀態無效或已被使用",stateExpired:"OIDC 登入會話已過期，請重試",providerNotFound:"未找到 OIDC 提供者",discoveryFailed:"無法獲取 OIDC 探索文件",invalidDiscovery:"OIDC 探索文件無效",networkError:"OIDC 權杖交換時出現網路錯誤",badResponse:"OIDC 權杖交換時收到意外回應",noIdToken:"OIDC 提供者未返回 ID 權杖",validationFailed:"OIDC 權杖驗證失敗",nonceMismatch:"OIDC nonce 不符，可能存在重放攻擊",missingSubClaim:"OIDC 權杖缺少 sub 宣告",noLinkedAccount:"沒有與此 OIDC 身份連結的本機帳戶",accountInactive:"您的帳戶已被停用",userResolutionFailed:"無法解析您的帳戶",internalError:"OIDC 登入過程中發生內部錯誤",tokenExchangeFailed:"OIDC 權杖交換失敗"},forgotPasswordTitle:"忘記密碼",forgotPasswordMessage:"如果您忘記了密碼，請聯絡系統管理員進行重設。",forgotPasswordEmailMessage:"輸入您的信箱地址，我們將向您傳送新密碼。",emailAddress:"信箱地址",emailPlaceholder:"your.email@example.com",cancel:"取消",sending:"傳送中...",sendResetEmail:"傳送重設郵件",howToReset:"如何重設密碼：",resetStep1:"聯絡您的 Bambuddy 管理員",resetStep2:"請他們在使用者管理中重設您的密碼",resetStep3:"他們可以為您設定一個臨時密碼",resetStep4:"使用新密碼登入並在設定中修改密碼",gotIt:"知道了",resetPassword:{title:"設定新密碼",subtitle:"請在下方輸入並確認您的新密碼。",newPassword:"新密碼",newPasswordPlaceholder:"至少 8 個字元",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"重複輸入新密碼",saving:"儲存中…",submit:"設定新密碼",backToLogin:"回到登入",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 8 個字元",resetFailed:"密碼重設失敗。連結可能已過期。"},twoFA:{title:"兩步驗證",subtitle:"您的帳戶已啟用兩步驗證。請在下方輸入驗證碼。",methodAuthenticator:"身份驗證器 App",methodEmail:"信箱驗證碼",methodBackup:"備用恢復碼",instructionsTotp:"請開啟您的身份驗證器 App，輸入 Bambuddy 的 6 位驗證碼。",instructionsEmail:"6 位驗證碼已傳送至您的信箱，有效期為 10 分鐘。",instructionsEmailNotSent:"點選下方按鈕，透過郵件獲取驗證碼。",instructionsBackup:"請輸入您的一個 8 位備用恢復碼。每個恢復碼只能使用一次。",sendCodeButton:"傳送信箱驗證碼",sendingCode:"傳送中...",resendCode:"重新傳送驗證碼",codeLabel:"驗證碼",backupCodeLabel:"備用恢復碼",codePlaceholder:"000000",backupCodePlaceholder:"XXXXXXXX",verifyButton:"驗證",verifyingButton:"驗證中...",backToLogin:"← 回到登入頁面",orContinueWith:"或透過以下方式登入",signInWith:"使用 {{provider}} 登入",enterCode:"請輸入驗證碼",sendCodeFailed:"驗證碼傳送失敗",invalidCode:"無效驗證碼，請重試。"}},setup:{title:"Bambuddy 設定",subtitle:"為您的 Bambuddy 實例設定身份驗證",enableAuth:"啟用身份驗證",adminAccount:"管理員帳戶",adminAccountDesc:"如果管理員使用者已存在，將使用現有管理員帳戶啟用身份驗證。如需使用現有管理員，請將下方欄位留空，或輸入新憑據建立新管理員使用者。",adminUsername:"管理員使用者名稱",adminPassword:"管理員密碼",optionalIfAdminExists:"（如管理員使用者已存在則為可選）",adminUsernamePlaceholder:"輸入管理員使用者名稱（可選）",adminPasswordPlaceholder:"輸入管理員密碼（可選）",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"確認管理員密碼",settingUp:"設定中...",completeSetup:"完成設定",toast:{authEnabledAdminCreated:"身份驗證已啟用並建立了管理員使用者",authEnabledExistingAdmins:"使用現有管理員使用者啟用了身份驗證",setupCompleted:"設定完成",enterBothCredentials:"請輸入管理員使用者名稱和密碼，或將兩者留空以使用現有管理員使用者",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元"}},changePassword:{title:"修改密碼",currentPassword:"目前密碼",currentPasswordPlaceholder:"輸入目前密碼",newPassword:"新密碼",newPasswordPlaceholder:"輸入新密碼（至少 6 個字元）",confirmPassword:"確認新密碼",confirmPasswordPlaceholder:"確認新密碼",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元",changing:"修改中...",success:"密碼修改成功",failed:"密碼修改失敗"},plateAlert:{title:"列印已暫停！",message:"在列印板上偵測到物體。列印已自動暫停。請清理列印板並繼續列印。",understand:"我知道了"},camera:{title:"攝影機檢視",invalidPrinterId:"無效的印表機 ID",live:"即時",snapshot:"快照",restartStream:"重新啟動流",refreshSnapshot:"重新整理快照",fullscreen:"全螢幕",exitFullscreen:"離開全螢幕",connectingToCamera:"連線攝影機中...",capturingSnapshot:"拍攝快照中...",connectionLost:"連線已斷開",connectionFailed:"攝影機連線失敗",reconnecting:"{{countdown}} 秒後重新連線...（第 {{attempt}}/{{max}} 次嘗試）",reconnectNow:"立即重新連線",cameraUnavailable:"攝影機不可用",cameraUnavailableDesc:"請確保印表機已通電並已連線。",noCamera:"無可用攝影機",retry:"重試",cameraStream:"攝影機流",zoomOut:"縮小",zoomIn:"放大",resetZoom:"重設縮放",recording:"錄製中",startRecording:"開始錄製",stopRecording:"停止錄製",chamberLight:"切換腔室燈"},groups:{title:"群組管理",subtitle:"管理存取控制的權限群組",backToSettings:"返回設定",createGroup:"建立群組",noPermission:"您沒有存取此頁面的權限。",system:"系統",noDescription:"無描述",usersCount:"{{count}} 個使用者",permissionsCount:"{{count}} 個權限",edit:"編輯",delete:"刪除",toast:{created:"群組建立成功",updated:"群組更新成功",deleted:"群組刪除成功",enterGroupName:"請輸入群組名稱"},modal:{editGroup:"編輯群組",createGroup:"建立群組",cancel:"取消",saving:"儲存中...",creating:"建立中...",saveChanges:"儲存更改"},form:{groupName:"群組名稱",groupNamePlaceholder:"輸入群組名稱",systemGroupWarning:"系統群組名稱不可更改",description:"描述",descriptionPlaceholder:"輸入描述（可選）",permissions:"權限（已選 {{count}} 個）"},deleteModal:{title:"刪除群組",message:"確定要刪除此群組嗎？此群組中的使用者將失去這些權限。",confirm:"刪除群組"},editor:{title:"編輯群組",createTitle:"建立群組",search:"搜尋權限...",selectAll:"全選",clearAll:"清除全部",permissionsSelected:"已選 {{count}} 個",noResults:"沒有權限匹配您的搜尋"}},users:{title:"使用者管理",subtitle:"管理使用者及其對 Bambuddy 實例的存取",backToSettings:"返回設定",createUser:"建立使用者",noPermission:"您沒有存取此頁面的權限。",admin:"管理員",noGroups:"無群組",active:"活躍",inactive:"非活躍",edit:"編輯",delete:"刪除",system:"系統",noGroupsAvailable:"無可用群組",table:{username:"使用者名稱",groups:"群組",status:"狀態",actions:"操作"},toast:{created:"使用者建立成功",updated:"使用者更新成功",deleted:"使用者刪除成功",fillRequired:"請填寫所有必填欄位",passwordsDoNotMatch:"密碼不符",passwordTooShort:"密碼至少需要 6 個字元"},modal:{createUser:"建立使用者",editUser:"編輯使用者",cancel:"取消",creating:"建立中...",saving:"儲存中...",saveChanges:"儲存更改",advancedAuthSubtitle:"使用進階認證"},form:{username:"使用者名稱",usernamePlaceholder:"輸入使用者名稱",email:"信箱",emailPlaceholder:"user@example.com",password:"密碼",passwordPlaceholder:"輸入密碼",confirmPassword:"確認密碼",confirmPasswordPlaceholder:"確認密碼",newPasswordPlaceholder:"輸入新密碼",confirmNewPasswordPlaceholder:"確認新密碼",leaveBlankToKeep:"留空以保持目前值",groups:"群組",optional:"可選",autoGeneratedPassword:"將自動產生安全密碼並透過郵件傳送給使用者。",passwordManagedByAdvancedAuth:'密碼由進階認證管理。使用"重設密碼"透過郵件向使用者傳送新密碼。',resetPassword:"重設密碼",resettingPassword:"重設密碼中..."},deleteModal:{title:"刪除使用者",message:"確定要刪除此使用者嗎？此操作無法復原。",confirm:"刪除使用者"}},streamOverlay:{title:"流疊加層",invalidPrinterId:"無效的印表機 ID",cameraStream:"攝影機流",progress:"進度",eta:"預計完成時間",printerIdle:"印表機空閒",printerOffline:"印表機離線",status:{printing:"列印中",paused:"已暫停",finished:"已完成",failed:"失敗",idle:"空閒",unknown:"未知"}},profiles:{title:"設定檔案",subtitle:"管理您的切片預設和壓力推進校準",tabs:{cloud:"雲端設定檔案",local:"本機設定檔案",kprofiles:"K 值設定"},localProfiles:{title:"本機設定檔案",subtitle:"從 OrcaSlicer 匯入和管理切片預設",import:"匯入設定檔案",importDesc:"將 .bbscfg、.bbsflmt、.orca_filament、.zip 或 .json 檔案拖放到此處",importing:"匯入中...",search:"搜尋本機預設...",noPresets:"尚無本機預設",badge:"本機",edit:"編輯",delete:"刪除",cancel:"取消",deleteConfirmTitle:"刪除預設",deleteConfirm:"確定要刪除此預設嗎？此操作無法復原。",source:"來源",inheritsFrom:"繼承自",filamentType:"類型",vendor:"廠商",compatiblePrinters:"相容印表機",nozzleTemp:"噴嘴溫度",cost:"成本",density:"密度",pressureAdvance:"壓力推進",filament:"耗材",process:"工藝",printer:"印表機",toast:{importSuccess:"已匯入 {{count}} 個預設",importSkipped:"跳過 {{count}} 個預設（重複）",importError:"匯入時出現 {{count}} 個錯誤",deleted:"預設已刪除",updated:"預設已更新"}},connectedAs:"已連線為",logout:"登出",noLogoutPermission:"您沒有登出的權限",failedToLoad:"載入設定檔案失敗",retry:"重試",time:{justNow:"剛剛",minsAgo:"{{count}} 分鐘前",hoursAgo:"{{count}} 小時前",daysAgo:"{{count}} 天前"},toast:{loggedOut:"已登出"},login:{title:"連線到拓竹雲",subtitle:"跨裝置同步您的切片預設",email:"信箱",password:"密碼",region:"地區",regionGlobal:"全球",regionChina:"中國",verificationCode:"驗證碼",totpCode:"驗證器驗證碼",checkEmail:"檢查您的信箱 ({{email}}) 獲取 6 位驗證碼",enterTotpHint:"輸入驗證器 App 中的 6 位驗證碼",accessToken:"存取權杖",accessTokenHint:"貼上您的拓竹存取權杖（來自 Bambu Studio）",back:"返回",loginButton:"登入",verifyButton:"驗證",setTokenButton:"設定權杖",useToken:"改用存取權杖",useEmail:"改用信箱登入",toast:{loggedIn:"登入成功",codeSent:"驗證碼已傳送到您的信箱",enterTotp:"輸入驗證器 App 中的程式碼",tokenSet:"權杖設定成功"}},presets:{myPreset:"我的預設（可編輯）",duplicate:"複製",editable:"可編輯",failedToLoadDetails:"載入預設詳情失敗",deleteConfirm:"刪除此預設？",deleteWarning:'這將從拓竹雲中永久刪除"{{name}}"。此操作無法復原。',noDuplicatePermission:"您沒有複製預設的權限",noEditPermission:"您沒有編輯預設的權限",noDeletePermission:"您沒有刪除預設的權限",types:{filament:"耗材預設",printer:"印表機預設",process:"工藝預設"},toast:{deleted:"預設已刪除",created:"預設已建立",updated:"預設已更新",duplicated:"預設已複製",fieldAdded:'欄位"{{key}}"已新增',exported:"預設已匯出"},baseLabel:"基礎：{{name}}",currentLabel:"目前：{{name}}",newPreset:"新增預設",editPreset:"編輯預設",duplicatePreset:"複製預設",createNewPreset:"建立新預設",customizeSettings:"自訂新預設的設定",compareWithBase:"與基礎預設比較",compare:"比較",basePreset:"基礎預設",selectBasePreset:"選擇基礎預設...",presetName:"預設名稱",myCustomPreset:"我的自訂預設",inheritsFrom:"繼承自",dropJsonToImport:"拖放 JSON 以匯入",tabs:{common:"常用",allFields:"所有欄位"},availableFields:"可用欄位",searchFieldsPlaceholder:"搜尋欄位...",noMatchingFields:"沒有匹配的欄位",allFieldsAdded:"所有欄位已新增",addCustomField:"新增自訂欄位",yourOverrides:"您的覆蓋值",noOverridesYet:"尚無覆蓋值",clickFieldsToAdd:"點選左側的欄位進行新增",saveAsTemplate:"儲存為範本",jsonTip:"提示：將 .json 檔案拖放到此對話方塊的任意位置以匯入設定"},cloudView:{searchPlaceholder:"搜尋預設...",templates:"範本",refresh:"重新整理",newPreset:"新增預設",clearFilters:"清除篩選",compareMode:"比較模式",selectAnotherPreset:"選擇另一個 {{type}} 預設",clickTwoPresets:"點選兩個相同類型的預設進行比較",selectFirst:"1. 選擇第一個",selectSecond:"2. 選擇第二個",compareNow:"立即比較",lastSynced:"上次同步：",showingCount:"顯示 {{showing}} / {{total}} 個預設",noPresetsFound:"未找到預設",columns:{filament:"耗材",process:"工藝",printer:"印表機"},noFilamentPresets:"無耗材預設",noProcessPresets:"無工藝預設",noPrinterPresets:"無印表機預設",filters:{type:"類型",owner:"所有者",printer:"印表機",nozzle:"噴嘴",filament:"耗材",layer:"層",all:"全部",myPresets:"我的預設",builtIn:"內建",process:"工藝"},noTemplatesPermission:"您沒有管理範本的權限",noRefreshPermission:"您沒有重新整理設定檔案的權限",noCreatePermission:"您沒有建立預設的權限"},templates:{title:"快速範本",noTemplates:"尚無範本",createFirst:"從預設編輯器建立範本",typeFilter:"類型：",deleteTitle:"刪除範本",deleteWarning:"此操作無法復原",deleteConfirm:'確定要刪除"{{name}}"嗎？',namePlaceholder:"範本名稱",descriptionPlaceholder:"描述",settingsJson:"設定 (JSON)",fieldsCount:"{{count}} 個欄位",shownInModals:"在對話方塊中顯示",hiddenInModals:"在對話方塊中隱藏",apply:"套用",toast:{deleted:"範本已刪除",updated:"範本已更新",created:"範本已建立",applied:"範本已套用"}}},support:{debugLoggingActive:"偵錯日誌紀錄已啟用",manageLogs:"管理",collectItem7:"印表機連線和韌體版本",collectItem8:"整合狀態（Spoolman、MQTT、HA）",collectItem9:"網路介面（僅子網）",collectItem10:"Python 套件版本",collectItem11:"資料庫健康檢查",collectItem12:"Docker 環境詳情"},fileManager:{title:"檔案管理器",subtitle:"組織和管理您的列印檔案",uploadFiles:"上傳檔案",newFolder:"新增資料夾",folderName:"資料夾名稱",folderNamePlaceholder:"例如：功能零件",renameFile:"重新命名檔案",renameFolder:"重新命名資料夾",moveFiles:"移動 {{count}} 個檔案",rootNoFolder:"根目錄（無資料夾）",current:"目前",linkFolder:"連結資料夾",linkFolderDescription:'將"{{name}}"連結到專案或歸檔以便快速存取。',project:"專案",archive:"歸檔",noProjectsFound:"未找到專案",noArchivesFound:"未找到歸檔",unlink:"取消連結",link:"連結",dragDropFiles:"將檔案拖放到此處",dropFilesHere:"將檔案放在此處",orClickToBrowse:"或點選瀏覽",allFileTypesSupported:"支援所有檔案類型。ZIP 檔案將被解壓。",zipFilesDetected:"偵測到 ZIP 檔案",zipExtractOptions:"ZIP 檔案將被解壓。選擇如何處理資料夾結構：",preserveZipStructure:"保留 ZIP 中的資料夾結構",createFolderFromZip:"從 ZIP 檔名建立資料夾",stlThumbnailGeneration:"STL 縮圖產生",zipMayContainStl:"ZIP 檔案可能包含 STL 檔案。可以在解壓時產生縮圖。",thumbnailsCanBeGenerated:"可以為 STL 檔案產生縮圖。大型模型可能需要更長時間處理。",generateThumbnailsForStl:"為 STL 檔案產生縮圖",threemfDetected:"偵測到 3MF 檔案",threemfExtractionInfo:"將自動從 3MF 檔案中提取印表機型號、材料、顏色和列印設定。",willBeExtracted:"將被解壓",filesExtracted:"已解壓 {{count}} 個檔案",uploadComplete:"上傳完成：{{succeeded}} 個成功",uploadFailed:"上傳失敗",zipFilesFailed:"{{count}} 個檔案失敗",uploading:"上傳中...",changeLink:"更改連結...",linkTo:"連結到...",linkToProjectOrArchive:"連結到專案或歸檔",addToQueue:"新增到佇列",schedulePrint:"排程",generateThumbnail:"產生縮圖",generateThumbnails:"產生縮圖",generateThumbnailsForMissing:"為缺少縮圖的 STL 檔案產生縮圖",gridView:"網格檢視",listView:"列表檢視",lowDiskSpaceWarning:"磁碟空間不足警告",lowDiskSpaceDetails:"僅剩 {{free}}（總共 {{total}}）。閾值設定為 {{threshold}} GB。",files:"檔案",folders:"資料夾",size:"大小",free:"剩餘",allFiles:"所有檔案",wrap:"換行",enableTextWrapping:"啟用文字換行",disableTextWrapping:"停用文字換行",collapse:"折疊",collapseFoldersByDefault:"預設折疊資料夾",expandFoldersByDefault:"預設展開資料夾",dragToResizeTooltip:"拖曳調整大小，雙擊重設",searchFiles:"搜尋檔案...",allTypes:"所有類型",prints:"列印",ascending:"升序",descending:"降序",resultsCount:"{{showing}} / {{total}} 個檔案",selectAll:"全選",deselectAll:"取消全選",selected:"已選擇 {{count}} 個",adding:"新增中...",loadingFiles:"載入檔案中...",folderIsEmpty:"資料夾為空",noFilesYet:"尚無檔案",folderEmptyDescription:"上傳檔案或將檔案移入此資料夾以開始使用。",noFilesDescription:"上傳檔案以開始組織您的列印相關檔案。",noMatchingFiles:"沒有匹配的檔案",noMatchingFilesDescription:"沒有檔案匹配您目前的搜尋或篩選條件。",clearFilters:"清除篩選",printedCount:"已列印 {{count}} 次",uploadedBy:"上傳者",deleteFolder:"刪除資料夾",deleteFile:"刪除檔案",deleteFilesCount:"刪除 {{count}} 個檔案",deleteFolderConfirm:"確定要刪除此資料夾嗎？其中的所有檔案也將被刪除。",deleteFileConfirm:"確定要刪除此檔案嗎？",deleteFilesConfirm:"確定要刪除 {{count}} 個選中的檔案嗎？此操作無法復原。",deleting:"刪除中...",noPermissionRenameFolder:"您沒有重新命名資料夾的權限",noPermissionLinkFolder:"您沒有連結資料夾的權限",noPermissionDeleteFolder:"您沒有刪除資料夾的權限",noPermissionPrint:"您沒有列印的權限",noPermissionSlice:"You do not have permission to slice files",noPermissionAddToQueue:"您沒有新增到佇列的權限",noPermissionDownload:"您沒有下載檔案的權限",noPermissionRenameFile:"您沒有重新命名此檔案的權限",noPermissionGenerateThumbnail:"您沒有產生縮圖的權限",noPermissionDeleteFile:"您沒有刪除此檔案的權限",noPermissionCreateFolder:"您沒有建立資料夾的權限",noPermissionUpload:"您沒有上傳檔案的權限",noPermissionMoveFiles:"您沒有移動檔案的權限",noPermissionDeleteFiles:"您沒有刪除檔案的權限",linkExternal:"連結外部",linkExternalFolder:"連結外部資料夾",linkExternalFolderDescription:"將主機目錄（NAS、USB、網路共享）掛載到檔案管理器中。檔案不會被複制——直接從原始路徑存取。",externalFolderNamePlaceholder:"例如：NAS列印檔案",externalPath:"主機路徑",externalPathHelp:"Docker主機上目錄的絕對路徑。必須以繫結掛載方式掛載到容器中。",readOnly:"只讀",readOnlyHelp:"防止上傳和刪除",showHiddenFiles:"顯示隱藏檔案（點檔案）",externalFolder:"外部資料夾",scanFolder:"掃描",toast:{folderCreated:"資料夾已建立",folderDeleted:"資料夾已刪除",fileDeleted:"檔案已刪除",filesDeleted:"已刪除 {{count}} 個檔案",filesMoved:"檔案已移動",folderLinked:"資料夾已連結",folderUnlinked:"資料夾已取消連結",externalFolderLinked:"外部資料夾已連結並掃描",folderScanned:"掃描完成：新增 {{added}} 個，移除 {{removed}} 個",addedToQueue:"已將 {{count}} 個檔案新增到佇列",addedToQueuePartial:"已新增 {{added}} 個檔案，{{failed}} 個失敗",failedToAddToQueue:"新增檔案失敗：{{error}}",fileRenamed:"檔案已重新命名",folderRenamed:"資料夾已重新命名",thumbnailsGenerated:"已產生 {{count}} 個縮圖",thumbnailsGeneratedPartial:"已產生 {{succeeded}} 個縮圖，{{failed}} 個失敗",noStlMissingThumbnails:"沒有缺少縮圖的 STL 檔案",failedToGenerateThumbnails:"產生縮圖失敗：{{error}}",thumbnailGenerated:"縮圖已產生",failedToGenerateThumbnail:"產生縮圖失敗：{{error}}"}},projects:{title:"專案",subtitle:"組織和追蹤您的 3D 列印專案",newProject:"新增專案",editProject:"編輯專案",deleteProject:"刪除專案",projectName:"專案名稱",description:"描述",noProjects:"尚無專案",noProjectsFiltered:"沒有{{status}}專案",noProjectsFilteredHelp:"您沒有任何{{status}}專案。當專案狀態更改時，它們將出現在這裡。",createFirst:"建立您的第一個項目以開始組織相關列印、追蹤進度和管理構建。",createFirstButton:"建立您的第一個項目",create:"建立",files:"檔案",prints:"列印",plates:"板",parts:"零件",lastModified:"最後修改",deleteConfirm:"確定要刪除此項目嗎？歸檔和佇列項目將被取消連結但不會被刪除。",addFiles:"新增檔案",removeFile:"移除檔案",viewDetails:"檢視詳情",namePlaceholder:"例如：Voron 2.4 構建",urlLabel:"網址",urlPlaceholder:"https://makerworld.com/...",urlInvalid:"網址必須以 http:// 或 https:// 開頭",openExternalUrl:"開啟專案網址",coverImageLabel:"封面圖片",coverImageAlt:"專案封面圖片",coverImageUpload:"上傳",coverImageReplace:"替換",coverImageRemove:"移除",descriptionPlaceholder:"可選描述...",color:"顏色",targetPlates:"目標板數",targetPlatesPlaceholder:"例如：25",targetPlatesHelp:"列印任務數量",targetParts:"目標零件數",targetPartsPlaceholder:"例如：150",targetPartsHelp:"所需零件總數",tagsLabel:"標籤（逗號分隔）",tagsPlaceholder:"例如：voron、功能件、禮物",dueDate:"截止日期",priority:"優先順序",priorityLow:"低",priorityNormal:"普通",priorityHigh:"高",priorityUrgent:"緊急",statusActive:"進行中",statusCompleted:"已完成",statusArchived:"已歸檔",done:"完成",completed:"已完成",failed:"失敗",inQueue:"佇列中",noPrintsYet:"尚無列印",printJobs:"列印任務（板）",partsPrinted:"已列印零件",failedParts:"失敗零件",import:"匯入",export:"匯出",importProject:"匯入專案",exportAll:"匯出所有專案",loading:"載入專案中...",noEditPermission:"您沒有編輯專案的權限",noDeletePermission:"您沒有刪除專案的權限",noCreatePermission:"您沒有建立專案的權限",noImportPermission:"您沒有匯入專案的權限",noExportPermission:"您沒有匯出專案的權限",toast:{created:"專案已建立",updated:"專案已更新",deleted:"專案已刪除",imported:"專案已匯入",multipleImported:"已匯入 {{count}} 個項目",importFailed:"匯入失敗",exported:"專案已匯出（僅中繼資料）"}},projectDetail:{notFound:"未找到專案",backToProjects:"返回專案",export:"匯出",exportProject:"匯出專案",noExportPermission:"您沒有匯出專案的權限",noEditPermission:"您沒有編輯專案的權限",partOf:"屬於：",priorityLabel:"優先順序：",noPrints:"此項目尚無列印",status:{active:"進行中",completed:"已完成",archived:"已歸檔"},priority:{low:"低",normal:"普通",high:"高",urgent:"緊急"},dueDate:{overdue:"已逾期",today:"今天到期",daysLeft:"還有 {{count}} 天"},progress:{platesProgress:"板進度",partsProgress:"零件進度",printJobs:"列印任務",parts:"零件",percentComplete:"{{percent}}% 完成",remaining:"剩餘 {{count}} 個"},stats:{printJobs:"列印任務",total:"總計",failed:"{{count}} 個失敗",partsPrinted:"已列印 {{count}} 個零件",printTime:"列印時間",filamentUsed:"耗材用量"},cost:{title:"成本追蹤",filamentCost:"耗材成本",energy:"能源",totalCost:"總成本",total:"總計",includesBom:"含物料清單",budget:"預算",remaining:"剩餘"},subProjects:{title:"子專案 ({{count}})"},notes:{title:"備註",noEditPermission:"您沒有編輯備註的權限",placeholder:"新增關於此項目的備註...",empty:"尚無備註。點選編輯新增備註。"},files:{title:"檔案",linkFolders:"從檔案管理器連結資料夾",forQuickAccess:"到此項目以便快速存取。",fileCount:"{{count}} 個檔案",empty:"未連結資料夾。前往檔案管理器將資料夾連結到此項目。",noFiles:"此資料夾中沒有檔案。",print:"立即列印",addToQueue:"加入佇列"},bom:{title:"材料清單",acquired:"已獲取 {{completed}}/{{total}}",showAll:"顯示全部",hideDone:"隱藏已完成",addPart:"新增零件",noAddPermission:"您沒有新增零件的權限",partNamePlaceholder:"零件名稱（例如：M3x8 螺絲）",partName:"零件名稱",qty:"數量",price:"價格 ({{currency}})",sourcingUrlPlaceholder:"採購連結（可選）",remarksPlaceholder:"備註（可選）",deletePart:"刪除零件",deleteConfirm:'確定要刪除"{{name}}"嗎？',noUpdatePermission:"您沒有更新零件的權限",noEditPermission:"您沒有編輯零件的權限",noDeletePermission:"您沒有刪除零件的權限",totalCost:"總成本：",empty:"材料清單中沒有零件。新增硬體、電子元件或其他元件以追蹤需要採購的物品。"},timeline:{title:"活動時間線",empty:"尚無活動。"},template:{saveAsTemplate:"儲存為範本",noCreatePermission:"您沒有建立範本的權限"},queue:{title:"佇列",viewAll:"檢視全部",printing:"{{count}} 個列印中",queued:"{{count}} 個佇列中"},prints:{title:"列印 ({{count}})"},toast:{projectUpdated:"專案已更新",partAdded:"零件已新增",partRemoved:"零件已移除",exportFailed:"匯出失敗",projectExported:"專案已匯出",templateCreated:"範本已建立"}},system:{title:"系統資訊",version:"版本",uptime:"執行時間",cpuUsage:"CPU 使用率",memoryUsage:"記憶體使用率",diskUsage:"磁碟使用率",networkInfo:"網路資訊",logs:"日誌",debugMode:"偵錯模式",enableDebug:"啟用偵錯日誌",disableDebug:"停用偵錯日誌",downloadLogs:"下載日誌",clearLogs:"清除日誌",dockerInfo:"Docker 資訊",containerName:"容器名稱",imageName:"映象名稱",platform:"平臺",architecture:"架構"},library:{title:"耗材庫",addFilament:"新增耗材",editFilament:"編輯耗材",deleteFilament:"刪除耗材",vendor:"廠商",material:"材料",color:"顏色",kFactor:"K 值",temperature:"溫度",noFilaments:"耗材庫中沒有耗材",deleteConfirm:"確定要刪除此耗材嗎？",importFromPrinter:"從印表機匯入",exportToFile:"匯出到檔案"},slice:{title:"Slice model",action:"Slice",slicing:"Slicing…",printer:"Printer profile",process:"Process profile",filament:"Filament profile",filamentSlot:"Filament {{index}} ({{type}})",selectPreset:"— Select a preset —",loadingPresets:"Loading presets…",analyzingPlateFilaments:"Analyzing plate filaments…",analyzingPlateFilamentsHint:"Running a preview slice to discover which AMS slots this plate uses. Cached after — re-opening is instant.",previewToast:"Analyzing {{name}} — {{elapsed}}",previewWithProgress:"Analyzing {{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",notUsedByPlate:"— not used by this plate",printerMismatch:"This 3MF was sliced for {{source}}, but you picked {{target}}. The slicer CLI cannot re-slice a 3MF for a different printer — open the source in Bambu Studio, change the printer, and re-export.",noPresetsForSlot:"No presets available",presetsLoadFailed:"Failed to load presets. Open Settings → Profiles to import them first.",allPresetsRequired:"All presets must be selected",enqueuing:"Submitting slice job…",queued:"Queued…",failed:"Slicing failed. Check the slicer sidecar logs.",startedToast:"Slicing {{name}} in the background…",queuedToast:"Queued: {{name}} — {{elapsed}}",runningToast:"Slicing {{name}} — {{elapsed}}",runningWithProgress:"{{name}} — {{stage}} ({{percent}}%) — {{elapsed}}",completedToast:"Sliced {{name}}",failedToast:"Slicing {{name}} failed: {{detail}}",tier:{local:"Imported",cloud:"Cloud",standard:"Standard"},cloud:{notAuthenticated:"Sign in to Bambu Cloud (Settings → Profiles → Cloud) to see your cloud presets.",expired:"Bambu Cloud session expired — sign in again to refresh your cloud presets.",unreachable:"Bambu Cloud is unreachable right now. Local and standard presets still work."}},spoolman:{title:"Spoolman 整合",enabled:"Spoolman 已啟用",url:"Spoolman URL",connected:"已連線",disconnected:"未連線",testConnection:"測試連線",sync:"同步",syncing:"同步中...",lastSync:"上次同步",linkToSpoolman:"連結到 Spoolman",openInSpoolman:"在 Spoolman 中開啟",unlinkSpool:"取消連結耗材",unlinkConfirmTitle:"解開料盤？",unlinkConfirmMessage:"這將斷開卷軸與 Spoolman 的連線。Spoolman 中的卷軸資料將保持不變。",selectSpool:"選擇耗材",noUnlinkedSpools:"無未連結的耗材",linkSuccess:"耗材已成功連結到 Spoolman",linkFailed:"連結耗材失敗",unlinkSuccess:"已成功從 Spoolman 取消連結耗材",unlinkFailed:"取消連結耗材失敗",spoolId:"耗材 ID",fillSourceLabel:"(Spoolman)",weight:"重量",remaining:"剩餘",disableWeightSync:"停用 AMS 估計重量同步",disableWeightSyncDesc:"不從 AMS 估計值更新剩餘容量。如果您更喜歡 Spoolman 的用量追蹤而非 AMS 百分比估計，請使用此選項。新耗材仍將使用 AMS 估計值作為初始重量。",reportPartialUsage:"報告失敗列印的部分用量",reportPartialUsageDesc:"當列印失敗或被取消時，根據層進度報告估計的耗材使用量。"},inventory:{title:"耗材庫存",spoolmanMixedContentTitle:"Spoolman 無法透過 HTTPS 載入 — 瀏覽器已封鎖混合內容",spoolmanMixedContentBody:"Bambuddy 透過您的反向代理以 HTTPS 提供服務，但您的 Spoolman 位址仍為 HTTP。基於安全考量，瀏覽器會封鎖混合內容，因此內嵌的 Spoolman 介面無法載入。Spoolman 也必須可透過 HTTPS 存取。",spoolmanMixedContentFixReverseProxy:"請將 Spoolman 置於與 Bambuddy 相同的反向代理（Traefik / Nginx / Caddy）之後並啟用 HTTPS，然後在設定中將 Spoolman URL 更新為新的 HTTPS 位址。",spoolmanMixedContentFixOpenNewTab:"作為替代方案，可在新分頁以 HTTP 開啟 Spoolman — 混合內容規則僅適用於內嵌框架，獨立分頁仍可正常運作。",spoolmanOpenInNewTab:"在新分頁開啟 Spoolman",addSpool:"新增耗材",editSpool:"編輯耗材",material:"材料",selectMaterial:"選擇材料...",subtype:"子類型",brand:"品牌",searchBrand:"搜尋品牌...",useCustomBrand:'使用"{{brand}}"',useCustomMaterial:"使用自訂材料：{{material}}",colorName:"顏色名稱",colorNamePlaceholder:"翡翠白、烈焰紅...",color:"顏色",hexColor:"十六進位顏色",pickColor:"選擇自訂顏色",labelWeight:"標籤重量",coreWeight:"空盤重量",searchSpoolWeight:"搜尋耗材重量...",weightUsed:"已使用",currentWeight:"剩餘重量",measuredWeight:"稱量重量",spoolName:"料盤",costPerKg:"每公斤成本",measuredWeightError:"稱量重量必須在 {{min}}g 到 {{max}}g 之間。",slicerFilament:"切片耗材",slicerFilamentName:"切片預設名稱",slicerPreset:"切片預設",searchPresets:"搜尋耗材預設...",selectedPreset:"已選擇",noPresetsFound:"未找到預設",tempOverrides:"溫度覆蓋",note:"備註",notePlaceholder:"關於此耗材的任何備註...",category:"類別",categoryPlaceholder:"例如：生產、原型、客戶A",categoryNone:"未分類",lowStockThresholdOverride:"低庫存閾值（此料盤）",lowStockThresholdOverrideHelp:"留空以使用全域閾值（{{global}}%）。",clearRfid:"清除 RFID 標籤",rfidCleared:"RFID 標籤已清除",archive:"歸檔",restore:"恢復",noSpools:"尚無耗材。新增您的第一個耗材開始使用。",noAvailableSpools:"沒有可用的耗材。請先向庫存中新增耗材，或從其他槽位取消指派一個耗材。",kProfiles:"K 值設定",addKProfile:"新增 K 值設定",assignSpool:"分配耗材",unassignSpool:"取消分配",assignSuccess:"耗材已分配，AMS 槽位已設定",assignFailed:"分配耗材失敗",assignMismatchTitle:"材料不符",assignMismatchMessage:'所選料盤材料 "{{spoolMaterial}}" 與 {{location}} 的料槽材料 "{{trayMaterial}}" 不符。仍要分配嗎？',assignMismatchConfirm:"仍然分配",assignPartialMismatchMessage:'料盤材料 "{{spoolMaterial}}" 與 {{location}} 的 "{{trayMaterial}}" 相近但不完全一致。是否繼續？',assignProfileMismatchMessage:'料盤設定 "{{spoolProfile}}" 與 {{location}} 的料槽設定 "{{trayProfile}}" 不一致。是否繼續？',selectSpool:"選擇要分配到此槽位的耗材",assigned:"已分配",assigning:"分配中...",searchSpools:"搜尋耗材...",showAllSpools:"顯示所有耗材",allMaterials:"所有材料",filterByBrand:"按品牌篩選...",showArchived:"顯示已歸檔",quickAdd:"快速新增（庫存）",quantity:"數量",stock:"庫存",configured:"已設定",spoolsCreated:"已建立 {{count}} 個耗材",spoolCreated:"耗材已建立",spoolUpdated:"耗材已更新",spoolDeleted:"耗材已刪除",spoolArchived:"耗材已歸檔",spoolRestored:"耗材已恢復",deleteConfirm:"確定要刪除此耗材嗎？此操作無法復原。",archiveConfirm:"確定要歸檔此耗材嗎？",advancedSettings:"進階設定",filamentInfoTab:"耗材資訊",paProfileTab:"PA 設定",filamentInfo:"耗材",additional:"附加",loadingPresets:"載入雲端預設中...",cloudConnected:"雲端已連線",cloudNotConnected:"雲端未連線（使用預設值）",recentColors:"最近",searchColors:"搜尋顏色...",searchResults:"搜尋結果",allColors:"所有顏色",commonColors:"常用顏色",showLess:"顯示更少",showAll:"顯示全部",noColorsFound:"沒有顏色匹配您的搜尋",noResults:"未找到匹配項",extraColorsLabel:"附加顏色",extraColorsPlaceholder:"EC984C,#6CD4BC,A66EB9,D87694",extraColorsHint:"貼上 2 至 8 個十六進位色值,以逗號分隔。將以漸層方式呈現。",extraColorsInvalid:"已略過無效的十六進位值:{{tokens}}",colorEffectLabel:"效果",colorEffect:{none:"無",sparkle:"閃光",wood:"木紋",marble:"大理石",glow:"夜光",matte:"霧面",silk:"絲光",galaxy:"星空",rainbow:"彩虹",metal:"金屬",translucent:"半透明",gradient:"漸層",dualColor:"雙色",triColor:"三色",multicolor:"多色"},selectMaterialFirst:"請先在耗材資訊分頁中選擇材料。",noPrintersConfigured:"未設定印表機。新增印表機以使用 PA 設定。",matchingFilter:"匹配",anyBrand:"任何品牌",anyVariant:"任何變體",autoSelect:"自動選擇",matches:"匹配",match:"匹配",noMatches:"無匹配",connected:"已連線",offline:"離線",printerOffline:"印表機離線。連線後檢視校準設定。",noKProfilesMatch:"沒有 K 值設定匹配所選耗材。",leftNozzle:"左噴嘴",rightNozzle:"右噴嘴",profilesSelected:"個校準設定已選擇",totalInventory:"總庫存",totalConsumed:"總消耗",byMaterial:"按材料",inPrinter:"在印表機中",lowStock:"庫存不足",sinceTracking:"自開始追蹤",loadedInAms:"已裝載到 AMS/外接",remaining:"剩餘",weightCheck:"重量檢查",lastWeighed:"上次稱量",neverWeighed:"從未稱量",search:"搜尋耗材...",showing:"顯示",to:"到",of:"共",show:"顯示",spools:"個耗材",spool:"個耗材",page:"頁",noSpoolsMatch:"未找到結果",noSpoolsMatchDesc:"嘗試調整您的搜尋或篩選條件。",active:"活躍",archived:"已歸檔",all:"全部",used:"已使用",new:"新的",clearFilters:"清除篩選",table:"表格",cards:"卡片",net:"淨重",groupSimilar:"分組",groupedSpools:"{{count}} 個相同耗材",groupedRows:"行",columns:"列",configureColumns:"設定列",configureColumnsDesc:"拖曳以重新排序列或使用箭頭。使用眼睛圖示切換可見性。",visible:"可見",reset:"重設",cancel:"取消",applyChanges:"套用更改",moveUp:"上移",moveDown:"下移",hideColumn:"隱藏列",showColumn:"顯示列",linkToSpool:"連結到耗材",tagLinked:"標籤已連結到耗材",tagLinkFailed:"連結標籤失敗",tagAlreadyLinked:"標籤已連結到其他耗材",unknownTag:"偵測到未知 RFID 標籤",usageHistory:"使用歷史",noUsageHistory:"尚無使用紀錄",printName:"列印名稱",weightConsumed:"消耗重量",clearHistory:"清除",historyCleared:"使用歷史已清除",fillSourceLabel:"(庫存)",lowStockThresholdError:"閾值必須在 0.1 到 99.9 之間"},timelapse:{title:"縮時攝影",create:"建立縮時攝影",download:"下載",delete:"刪除",preview:"預覽",frameRate:"幀率",quality:"品質",processing:"處理中...",noTimelapses:"無可用縮時攝影"},ams:{title:"AMS",slot:"槽位",empty:"空",emptySlot:"空槽位",unknown:"未知",humidity:"濕度",temperature:"溫度",filamentType:"耗材類型",filamentColor:"顏色",remaining:"剩餘",history:"AMS 歷史",noHistory:"無可用歷史",configureSlot:"設定槽位",externalSpool:"外接耗材",profile:"設定",kFactor:"K 值",fill:"填充",configure:"設定",used:"已使用",remainingUnit:"剩餘"},printModal:{title:"開始列印",selectPrinter:"選擇印表機",selectPlate:"選擇板",filamentMapping:"耗材對應",totalCost:"總成本：",slotRemainingShort:" - 剩餘 {{grams}}g",printSettings:"列印設定",bedLeveling:"熱床調平",flowCalibration:"流量校準",vibrationCalibration:"振動校準",layerInspection:"首層檢查",timelapse:"縮時攝影",startPrint:"開始列印",addToQueue:"新增到佇列",cancel:"取消",noPrintersAvailable:"無可用印表機",printerBusy:"印表機忙碌",printerOffline:"印表機離線",sameTypeDifferentColor:"相同類型，不同顏色",filamentTypeNotLoaded:"耗材類型未裝載",openCalendar:"開啟日曆",leftNozzle:"左",rightNozzle:"右",leftNozzleTooltip:"左噴嘴",rightNozzleTooltip:"右噴嘴",filamentOverride:"耗材覆蓋",filamentOverrideHint:"可選覆蓋用於基於模型的耗材分配。排程器將使用您選擇的耗材而不是原始 3MF 值進行匹配。",originalFilament:"原始",overrideWith:"覆蓋為",resetToOriginal:"恢復為原始",insufficientFilamentTitle:"耗材不足",insufficientFilamentMessage:"部分已分配料盤的剩餘耗材少於本次列印所需：",insufficientFilamentLine:"{{printer}} - {{slot}}：需要 {{required}}g，剩餘 {{remaining}}g",printAnyway:"仍然列印",forceColorMatch:"強制顏色匹配",staggerPrinterStarts:"錯開印表機啟動",staggerGroupSize:"群組大小",staggerInterval:"間隔（分鐘）",staggerPreview:"{{printers}} 台印表機 → 分成 {{groups}} 組，每組 {{size}} 台，每 {{interval}} 分鐘啟動一組",staggerLastGroup:"最後一組：{{count}}",staggerTotal:"總計：{{minutes}} 分鐘",staggerToPrinters:"分批傳送到 {{count}} 臺印表機",gcodeInjection:"注入自動列印G-code"},backup:{title:"備份與恢復",createBackup:"建立備份",restoreBackup:"恢復備份",restoreDescription:"從備份檔案替換所有資料",downloadBackup:"下載備份",uploadBackup:"上傳備份",lastBackup:"上次備份",autoBackup:"自動備份",backupNow:"立即備份",restoreWarning:"警告：恢復備份將覆蓋所有目前資料。",includeArchives:"包含歸檔",includeSettings:"包含設定",includeProfiles:"包含設定檔案",backupSuccess:"備份建立成功",restoreSuccess:"備份恢復成功",backupFailed:"備份失敗",restoreFailed:"恢復失敗",restoreNote:"恢復期間虛擬印表機將停止",githubBackup:"GitHub 備份",enabled:"已啟用",cloudLoginRequired:"需要登入 Bambu Cloud。請在 設定檔案 → 雲設定檔案 中登入以啟用 GitHub 備份。",cloudLoginRequiredShort:"需要雲端登入",githubDescription:"自動將您的設定檔案同步到私有 GitHub 倉庫以進行備份和版本歷史紀錄。",repositoryUrl:"倉庫 URL",personalAccessToken:"個人存取權杖",tokenSaved:"（已儲存）",enterNewToken:"輸入新權杖以更新",tokenHint:"具有內容讀寫權限的細粒度權杖",branch:"分支",manualOnly:"僅手動",hourly:"每小時",daily:"每天",weekly:"每週",includeInBackup:"包含在備份中",kProfiles:"K 設定檔案",kProfilesDescription:"來自已連線印表機的壓力推進校準",noPrintersConnected:"沒有印表機連線",printersConnected:"{{connected}}/{{total}} 已連線",cloudProfiles:"雲設定檔案",cloudProfilesDescription:"來自 Bambu Cloud 的耗材、印表機和工藝預設",appSettings:"應用程式設定",appSettingsDescription:"Bambuddy 設定（完整資料庫）",spoolInventory:"耗材庫存",spoolInventoryDescription:"耗材卷軸、使用紀錄和成本追蹤",printArchives:"列印檔案",printArchivesDescription:"列印歷史中繼資料（不含 gcode/3MF 檔案）",lastBackupAt:"上次備份：",noBackupsYet:"尚無備份",next:"下次：",startingBackup:"正在啟動備份...",test:"測試",enableBackup:"啟用備份",testConnection:"測試連線",enterRepoUrl:"請輸入倉庫 URL",enterRepoAndToken:"請輸入倉庫 URL 和存取權杖",repoRequired:"倉庫 URL 為必填項",tokenRequired:"存取權杖為必填項",githubBackupEnabled:"GitHub 備份已啟用",tokenUpdated:"權杖已更新",settingsSaved:"設定已儲存",failedToSave:"儲存失敗：{{message}}",backupCompleteFiles:"備份完成 - {{count}} 個檔案已更新",backupSkippedNoChanges:"備份已跳過 - 無更改",backupFailed2:"備份失敗：{{message}}",clearedLogs:"已清除 {{count}} 條日誌",failedToClearLogs:"清除日誌失敗：{{message}}",history:"歷史紀錄",clear:"清除",date:"日期",status:"狀態",commit:"提交",localBackup:"本機備份",localBackupDescription:"建立 Bambuddy 資料的完整備份，包括資料庫、檔案、上傳和所有檔案。",downloadBackupLabel:"下載備份",completeBackupZip:"完整備份：資料庫 + 所有檔案（ZIP）",download:"下載",preparingBackup:"正在準備備份...",creatingArchive:"正在建立備份歸檔...對於大型歸檔可能需要一些時間。",downloadingFile:"正在下載備份檔案...",backupDownloaded:"備份下載成功",failedToCreateBackup:"建立備份失敗：{{message}}",restore:"恢復",restoreReplacesAll:"恢復將替換所有資料。",restoreReplacesAllDetail:"您目前的資料庫和檔案將被完全替換。恢復後需要重新啟動。",restoreConfirmTitle:"恢復備份",restoreConfirmMessage:'您確定要從"{{filename}}"恢復嗎？這將完全替換您目前的資料庫和所有檔案。恢復後需要重新啟動應用程式。',restoreConfirmButton:"恢復備份",uploadingFile:"正在上傳備份檔案...",backupRestoredRestart:"備份已恢復。請重新啟動 Bambuddy。",failedToRestore:"恢復備份失敗。請檢查檔案格式。",reloadNow:"立即重新載入",creatingBackup:"正在建立備份",restoringBackup:"正在恢復備份",preparing:"準備中...",processing:"處理中...",doNotClosePage:"請不要關閉此頁面或離開頁面。對於大型備份，此操作可能需要幾分鐘。",restoring:"恢復中...",restoreComplete:"恢復完成",restoreFailed2:"恢復失敗",importSettings:"從備份檔案匯入設定",pleaseWaitRestoring:"請等待資料恢復中",selectBackupFile:"點選選擇備份檔案（.json 或 .zip）",duplicateHandling:"重複項處理方式：",matchPrinters:"印表機",matchPrintersBy:"按序列號匹配",matchSmartPlugs:"智慧插座",matchSmartPlugsBy:"按 IP 位址匹配",matchNotificationProviders:"通知提供者",matchNotificationProvidersBy:"按名稱匹配",matchFilaments:"耗材",matchFilamentsBy:"按名稱 + 類型 + 品牌匹配",matchArchives:"檔案",matchArchivesBy:"按內容雜湊匹配（始終跳過）",matchPendingUploads:"待上傳",matchPendingUploadsBy:"按檔名匹配",matchSettingsTemplates:"設定和範本",matchSettingsTemplatesBy:"始終覆蓋",replaceExisting:"替換現有資料",keepExisting:"保留現有資料",overwriteDescription:"用備份資料覆蓋已存在的項目",keepDescription:"僅恢復尚不存在的項目",overwriteCaution:"注意：",overwriteWarning:"覆蓋將用備份資料替換您目前的設定。出於安全考慮，印表機存取碼永遠不會被覆蓋。",cancel:"取消",processingBackup:"正在處理備份檔案...",itemsRestored:"已恢復項目",itemsSkipped:"已跳過項目",restored:"已恢復",skippedAlreadyExist:"已跳過（已存在）",filesCategory:"檔案（3MF、縮圖等）",andMore:"...還有 {{count}} 項",newApiKeysGenerated:"已產生新的 API 金鑰",keysShownOnce:"這些金鑰僅顯示一次。請立即複製！",copy:"複製",noDataFound:"在備份檔案中未找到可恢復的資料。",close:"關閉",scheduledBackup:"排程備份",scheduledBackupDescription:"依排程自動建立備份快照。輸出目錄可掛載到 NAS 或外部儲存。",frequency:"頻率",backupTime:"時間",retention:"保留",retentionDescription:"保留的備份數量",outputPath:"輸出路徑",outputPathPlaceholder:"預設：{{path}}",outputPathDescription:"留空以使用預設位置",runNow:"立即執行",backupFiles:"備份檔案",noScheduledBackups:"尚無備份",deleteBackup:"刪除",deleteBackupConfirm:"要刪除此備份檔案嗎？",backupRunning:"備份進行中…",scheduledBackupComplete:"備份已成功完成",scheduledBackupFailed:"備份失敗",nextBackup:"下次備份",backupSize:"大小",utc:"UTC",defaultPathLabel:"預設：",categories:{settings:"設定",notification_providers:"通知提供者",notification_templates:"通知範本",smart_plugs:"智慧插座",printers:"印表機",filaments:"耗材",maintenance_types:"維護類型",archives:"檔案",projects:"專案",pending_uploads:"待上傳",external_links:"外部連結",api_keys:"API 金鑰"}},tags:{title:"標籤",addTag:"新增標籤",editTag:"編輯標籤",deleteTag:"刪除標籤",tagName:"標籤名稱",tagColor:"標籤顏色",noTags:"無標籤",deleteConfirm:"確定要刪除此標籤嗎？",manageTags:"管理標籤"},uploadModal:{title:"上傳 3MF 檔案",dragDrop:"將 .3mf 檔案拖放到此處",or:"或",browseFiles:"瀏覽檔案",extractionInfo:"將從 3MF 檔案中繼資料中自動提取印表機型號。",uploaded:"已上傳",failed:"失敗",uploading:"上傳中...",upload:"上傳",uploadFailed:"上傳失敗"},editArchive:{title:"編輯歸檔",name:"名稱",namePlaceholder:"列印名稱",printer:"印表機",noPrinter:"無印表機",project:"專案",noProject:"無專案",itemsPrinted:"列印數量",itemsPrintedHelp:"此列印任務中生產的物品數量",notes:"備註",notesPlaceholder:"新增關於此列印的備註...",externalLink:"外部連結",externalLinkPlaceholder:"https://printables.com/model/...",externalLinkHelp:"連結到 Printables、Thingiverse 或其他來源",tags:"標籤",tagsPlaceholder:"新增標籤...",addMoreTags:"新增更多標籤...",matchingTags:'匹配"{{query}}"',existingTags:"現有標籤",clickToAdd:"（點選新增）",status:"狀態",failureReason:"失敗原因",selectReason:"選擇原因...",photos:"列印成品照片",photosHelp:"點選 + 新增列印成品照片",printResult:"列印成品",saving:"儲存中...",failureReasons:{adhesionFailure:"附著力失敗",spaghettiDetached:"拉絲 / 脫落",layerShift:"層偏移",cloggedNozzle:"噴嘴堵塞",filamentRunout:"耗材用完",warping:"翹曲",stringing:"拉絲",underExtrusion:"擠出不足",powerFailure:"斷電",userCancelled:"使用者取消",other:"其他"},statuses:{completed:"已完成",failed:"失敗",aborted:"已取消",printing:"列印中"}},kProfiles:{title:"K 值設定",noPrintersConfigured:"未設定印表機",addPrinterInSettings:"在設定中新增印表機以管理 K 值設定",noActivePrinters:"無活躍印表機",enablePrinterConnection:"啟用印表機連線以檢視其 K 值設定",loadingProfiles:"載入 K 值設定中...",printerOffline:"印表機離線",printerOfflineDesc:"所選印表機未連線。開啟電源以檢視 K 值設定。",noMatchingProfiles:"無匹配的設定",noMatchingProfilesDesc:"沒有設定匹配您的搜尋條件",noKProfiles:"無 K 值設定",noKProfilesDesc:"未找到 {{diameter}}mm 噴嘴的壓力推進設定",createFirstProfile:"建立第一個設定",printer:"印表機",nozzle:"噴嘴",refresh:"重新整理",addProfile:"新增設定",export:"匯出",import:"匯入",select:"選擇",selectAll:"全選",delete:"刪除",searchPlaceholder:"按名稱或耗材搜尋...",allExtruders:"所有擠出機",leftOnly:"僅左側",rightOnly:"僅右側",allFlow:"所有流量",hfOnly:"僅高流量",sOnly:"僅標準",sortName:"排序：名稱",sortKValue:"排序：K 值",sortFilament:"排序：耗材",leftExtruder:"左擠出機",rightExtruder:"右擠出機",modal:{addTitle:"新增 K 值設定",editTitle:"編輯 K 值設定",profileName:"設定名稱",profileNamePlaceholder:"我的 PLA 設定",kValue:"K 值",kValuePlaceholder:"0.020",kValueHelp:"典型範圍：PLA 0.01 - 0.06，PETG 0.02 - 0.10",filament:"耗材",selectFilament:"選擇耗材...",noFilamentsHelp:"未找到耗材。請先在 Bambu Studio 中建立 K 值設定。",flowType:"流量類型",highFlow:"高流量",standard:"標準",nozzleSize:"噴嘴尺寸",extruder:"擠出機",extruders:"擠出機",left:"左",right:"右",notes:"備註（本機儲存）",notesPlaceholder:"新增關於此設定的備註...",notesHelp:"備註儲存在 Bambuddy 中，不在印表機上",syncing:"與印表機同步中...",savingExtruder:"儲存到擠出機 {{current}}/{{total}}...",pleaseWait:"請稍候"},deleteConfirm:{title:"刪除設定",cannotUndo:"此操作無法復原",message:'確定要從印表機刪除"{{name}}"嗎？'},bulkDelete:{title:"刪除設定",cannotUndo:"此操作無法復原",message:"確定要從印表機刪除 {{count}} 個選中的設定嗎？"},toast:{profileSaved:"K 值設定已儲存",profilesSaved:"K 值設定已儲存到 {{count}} 個擠出機",selectAtLeastOneExtruder:"請至少選擇一個擠出機",profileDeleted:"K 值設定已刪除",profilesDeleted:"已刪除 {{count}} 個設定",exportedProfiles:"已匯出 {{count}} 個設定",importedProfiles:"已匯入 {{count}} / {{total}} 個設定",noProfilesToExport:"無可匯出的設定",invalidFileFormat:"無效的檔案格式",failedToParseImport:"解析匯入檔案失敗",failedToSaveBatch:"批次儲存 K 值設定失敗",noteSaved:"備註已儲存",failedToSaveNote:"儲存備註失敗"},permission:{noRead:"您沒有重新整理設定的權限",noCreate:"您沒有新增設定的權限",noUpdate:"您沒有更新 K 值設定的權限",noDelete:"您沒有刪除 K 值設定的權限",noExport:"您沒有匯出設定的權限",noImport:"您沒有匯入設定的權限"}},virtualPrinter:{title:"虛擬印表機",running:"執行中",stopped:"已停止",description:{default:"啟用虛擬印表機，使其在 Bambu Studio 和 OrcaSlicer 中可見。傳送到此印表機的檔案將直接歸檔而不列印。",proxy:"啟用代理，將切片軟體流量中繼到真實印表機，允許在任何網路上遠端列印。"},enable:{title:"啟用虛擬印表機",visibleInSlicer:'在切片軟體發現中顯示為"Bambuddy"',proxyingTo:"代理到 {{name}}",notActive:"未啟用"},model:{title:"印表機型號",description:"選擇要模擬的印表機型號。",restartWarning:"更改型號將重新啟動虛擬印表機"},accessCode:{title:"存取碼",isSet:"存取碼已設定",notSet:"未設定存取碼 - 需要設定才能啟用",placeholder:"輸入 8 位字元程式碼",placeholderChange:"輸入新程式碼以更改",hint:"必須恰好 8 個字元。切片軟體使用此程式碼進行認證。",charCount:"({{count}}/8)"},targetPrinter:{title:"目標印表機",configured:"代理目標已設定",notConfigured:"未選擇目標印表機 - 代理模式需要設定",placeholder:"選擇印表機...",hint:"選擇要將切片軟體流量代理到的印表機。印表機必須處於區域網路模式。",noPrinters:"未設定印表機。請先新增印表機以使用代理模式。"},remoteInterface:{title:"網路介面覆蓋",configured:"介面覆蓋已啟用",optional:"可選 - 當自動檢測的 IP 不正確時使用（例如多網路卡、Docker、VPN）",placeholder:"自動檢測（預設）...",hint:"覆蓋透過 SSDP 廣播並在 TLS 憑證中使用的 IP 位址。在 Bambuddy 有多個網路介面時很有用。"},mode:{title:"模式",archive:"歸檔",archiveDesc:"立即歸檔檔案",review:"審核",reviewDesc:"歸檔前審核",queue:"佇列",queueDesc:"歸檔並新增到佇列",proxy:"代理",proxyDesc:"中繼到真實印表機"},autoDispatch:{title:"自動派發",description:"新增到佇列時自動開始列印。關閉後，列印任務等待手動派發。"},tailscaleDisabled:{title:"Tailscale 整合",description:"啟用後，使用 Tailscale 取得受信任的 TLS 憑證。停用則僅使用自簽憑證。"},setupRequired:{title:"需要設定",description:"虛擬印表機功能需要額外的系統設定才能工作。包括埠轉發、防火牆規則和平臺特定設定。",readGuide:"啟用前請閱讀設定指南"},archiveNameSource:{title:"存檔名稱來源",description:'選擇透過虛擬印表機接收檔案時新存檔的命名方式。"元資料"使用 3MF 中嵌入的切片標題（預設）。"檔名"使用 Bambu Studio 透過 FTP 傳送的檔案名稱 — 當您在"傳送到印表機"對話方塊中重新命名工作時非常有用。',metadata:"元資料",filename:"檔名"},howItWorks:{title:"工作原理",step1:"在同一區域網路中，虛擬印表機會透過發現機制自動出現在您的切片軟體（Bambu Studio / OrcaSlicer）中。從其他網路，透過 IP 位址和存取碼手動新增。",step2:'在歸檔、審核和佇列模式下，使用切片軟體中的"傳送"按鈕將 3MF 檔案上傳到 Bambuddy。切片軟體會顯示"列印成功"— 檔案已儲存，未列印。',step3:"在代理模式下，虛擬印表機將所有流量中繼到真實印表機 — 列印會立即開始，就像直接連線一樣。"},status:{title:"狀態詳情",printerName:"印表機名稱",model:"型號",serialNumber:"序列號",mode:"模式",pendingFiles:"待處理檔案",targetPrinter:"目標印表機",ftpPort:"FTP 連接埠",mqttPort:"MQTT 連接埠",ftpConnections:"FTP 連線",mqttConnections:"MQTT 連線"},toast:{updated:"虛擬印表機設定已更新",failedToUpdate:"更新設定失敗",tailscaleNotAvailable:"此主機上未安裝 Tailscale。請先安裝 Tailscale，然後重試。",copyFailed:"複製失敗 — 請手動選取文字",accessCodeRequired:"請先設定存取碼",targetPrinterRequired:"請先選擇目標印表機",bindIpRequired:"請先設定繫結 IP",accessCodeEmpty:"存取碼不能為空",accessCodeLength:"存取碼必須恰好 8 個字元",created:"虛擬印表機已建立",failedToCreate:"建立虛擬印表機失敗",deleted:"虛擬印表機已刪除",failedToDelete:"刪除虛擬印表機失敗"},list:{title:"虛擬印表機",add:"新增",addFirst:"新增虛擬印表機",empty:"未設定虛擬印表機。新增一個以開始使用。"},bindIp:{title:"繫結介面",placeholder:"選擇介面...",hint:"此虛擬印表機繫結的網路介面。每臺印表機必須唯一。"},proxy:{accessCodeHint:"在代理模式下，在切片軟體中使用目標印表機的存取碼。連線會透明轉發到真實印表機。"},addDialog:{title:"新增虛擬印表機",name:"名稱",hint:"建立後可以設定存取碼、目標印表機和其他設定。",create:"建立"},deleteConfirm:{title:"刪除虛擬印表機",message:'確定要刪除"{{name}}"嗎？這將停止此印表機的所有服務。'}},modelViewer:{openInSlicer:"在切片軟體中開啟",tabs:{model:"3D 模型",gcode:"G-code 預覽"},notAvailable:"不可用",notSliced:"未切片",plates:"板",allPlates:"所有板",plateNumber:"板 {{number}}",plateCount:"{{count}} 個板",plateCount_other:"{{count}} 個板",objectCount:"{{count}} 個物件",objectCount_other:"{{count}} 個物件",filamentCount:"{{count}} 種耗材",filamentCount_other:"{{count}} 種耗材",eta:"預計 {{minutes}} 分鐘",noPreview:"此檔案無可用預覽",pagination:{pageOf:"第 {{current}} / {{total}} 頁",prev:"上一頁",next:"下一頁"},errors:{failedToLoad:"載入檔案失敗",noMeshes:"3MF 檔案中未找到網格",unsupportedFormat:"不支援的檔案格式"}},maintenanceDescriptions:{lubricateCarbonRods:"在碳纖維杆上塗抹潤滑劑以確保順暢運動",lubricateRails:"在線性導軌上塗抹潤滑劑以確保順暢運動",cleanNozzle:"清潔熱端和噴嘴以防止堵塞",checkBelts:"檢查皮帶張力以確保列印精度",cleanBuildPlate:"清潔列印板以獲得更好的附著力",checkExtruder:"檢查擠出機齒輪磨損情況",checkCooling:"確保冷卻風扇正常工作",generalInspection:"印表機綜合檢查",cleanCarbonRods:"清潔碳纖維杆以減少摩擦",lubricateSteelRods:"在鋼杆上塗抹潤滑劑以確保順暢運動",cleanSteelRods:"清潔鋼杆以減少摩擦",cleanLinearRails:"擦拭線性導軌以清除灰塵和碎屑",checkPtfeTube:"檢查 PTFE 管的磨損或損壞",replaceHepaFilter:"更換 HEPA 過濾器以保證空氣品質",replaceCarbonFilter:"更換活性炭過濾器",lubricateLeftNozzleRail:"潤滑左噴嘴導軌（H2 系列）"},smartPlugs:{offline:"離線",admin:"管理",openPlugAdminPage:"開啟插座管理頁面",deleteSmartPlug:"刪除智慧插座",turnOnSmartPlug:"開啟智慧插座",turnOffSmartPlug:"關閉智慧插座",turnOn:"開啟",turnOff:"關閉",addSmartPlug:{scanningNetwork:"掃描網路中...",chooseEntity:"選擇實體...",connectionFailed:"連線失敗",searchEntities:"搜尋實體...",searchPowerSensors:"搜尋功率感測器...",searchEnergySensors:"搜尋能量感測器...",placeholders:{plugName:"客廳插座",mqttStateOnValue:"ON、true、1",mqttSameAsPower:"與功率主題相同，或不同"}},linkedTo:"連結到：",monitorOnly:"僅監控",alerts:"警報",scheduleOn:"開啟 {{time}}",scheduleOff:"關閉 {{time}}",on:"開啟",off:"關閉",power:"功率",kwhToday:"今日kWh",settings:"設定",automationSettings:"自動化設定",showInSwitchbar:"在開關欄顯示",quickAccessSidebar:"從側邊欄快速存取",enabled:"已啟用",enableAutomation:"為此插座啟用自動化",autoOn:"自動開啟",autoOnDescription:"列印開始時開啟",autoOff:"自動關閉",autoOffDescription:"列印完成時關閉（一次性）",autoOffPersistent:"保持啟用",autoOffPersistentDescription:"在列印之間保持啟用而非一次性",turnOffDelayMode:"關閉延遲模式",time:"時間",temp:"溫度",delayMinutes:"延遲（分鐘）",tempThreshold:"溫度閾值（°C）",tempThresholdDescription:"當噴嘴冷卻到此溫度以下時關閉",edit:"編輯",deleteConfirm:'確定要刪除"{{name}}"嗎？此操作無法復原。',turnOnConfirm:'確定要開啟"{{name}}"嗎？',turnOffConfirm:'確定要關閉"{{name}}"嗎？這將切斷連線裝置的電源。',failedToTurn:'無法{{action}}"{{name}}"',unknown:"未知",addTitle:"新增智慧插座",editTitle:"編輯智慧插座",stopScanning:"停止掃描",discoverTasmota:"發現Tasmota裝置",foundDevices:"找到{{count}}個裝置 - 點選選擇：",noDevicesFound:"未在您的網路中找到Tasmota裝置",haNotConfigured:"Home Assistant未設定。請在以下位置設定",haSettingsPath:"設定 → 網路 → Home Assistant",selectEntity:"選擇實體 *",ipAddress:"IP 位址 *",nameLabel:"名稱 *",username:"使用者名稱",password:"密碼",authHint:"如果您的Tasmota裝置不需要認證，請留空",linkToPrinter:"連結印表機",noPrinter:"無印表機（僅手動控制）",linkingDescription:"連結後可在列印開始/完成時自動開關",powerAlerts:"功率警報",alertAbove:"高於時警報（W）",alertBelow:"低於時警報（W）",alertDescription:"當電力消耗超過這些閾值時收到通知。留空以停用該方向。",dailySchedule:"每日計畫",turnOnAt:"開啟時間",turnOffAt:"關閉時間",scheduleDescription:"每天在這些時間自動開關插座。留空以跳過該操作。",showOnPrinterCard:"在印表機卡片上顯示",displayOnPrinterCard:"在印表機卡片上顯示按鈕",connectedResult:"已連線！",deviceLabel:"裝置：{{name}} - ",stateLabel:"狀態：{{state}}",test:"測試",delete:"刪除",save:"儲存",add:"新增",cancel:"取消",failedToStartScan:"無法開始掃描",nameRequired:"名稱為必填項",entityRequired:"Home Assistant插座需要實體",mqttTopicRequired:"必須為功率、能源或狀態監控設定至少一個MQTT主題",loadingEntities:"正在載入實體...",loading:"載入中...",failedToLoadEntities:"載入實體失敗：{{error}}",noEntitiesMatching:'未找到匹配"{{search}}"的實體',noEntitiesAvailable:"無可用實體",searchingEntities:"搜尋所有實體（找到{{count}}個）",showingEntities:"顯示 switch、light、input_boolean（{{count}}個可用）",energyMonitoringOptional:"能源監控（可選）",energyMonitoringHint:"搜尋並選擇提供功率/能源資料的感測器。",powerSensorW:"功率感測器（W）",energyTodayKwh:"今日能源（kWh）",totalEnergyKwh:"總能源（kWh）",noMatchingSensors:"無匹配的感測器",none:"無",mqttNotConfigured:"MQTT代理未設定。請在以下位置設定代理地址",mqttSettingsPath:"設定 → 網路 → MQTT發布",mqttNotConfiguredSuffix:"（您不需要啟用發布，只需填寫代理詳細資訊）。",mqttMonitorOnlyDescription:"MQTT插座透過MQTT訂閱接收功率/能源資料。開關控制不可用 - 請使用您的MQTT代理或家庭自動化系統。",powerMonitoring:"功率監控",energyMonitoring:"能源監控",stateMonitoring:"狀態監控",optional:"可選",topic:"主題",jsonPath:"JSON路徑",multiplier:"乘數",onValue:"ON值",mqttPowerHint:`JSON路徑從JSON負載中提取值（例如"power_l1"）。如果主題發布原始數值，請留空。
 乘數：mW→W使用0.001，kW→W使用1000。`,mqttEnergyHint:`JSON路徑從JSON負載中提取值。原始值請留空。
 乘數：Wh→kWh使用0.001，MWh→kWh使用1000。`,mqttStateHint:`JSON路徑從JSON負載中提取值。原始值請留空。
 ON值：表示"ON"的確切字串。留空以自動檢測（ON、true、1）。`,restControl:"控制",restOnUrl:"開啟 URL",restOffUrl:"關閉 URL",restOnBody:"開啟請求內容",restOffBody:"關閉請求內容",restMethod:"HTTP 方法",restHeaders:"自訂標頭（JSON）",restStatusUrl:"狀態 URL",restStatusPath:"狀態 JSON 路徑",restStatusOnValue:"ON 值",restPowerUrl:"功率URL",restPowerPath:"功率 JSON 路徑",restPowerMultiplier:"功率乘數",restEnergyUrl:"能耗URL",restEnergyPath:"能耗 JSON 路徑",restEnergyMultiplier:"能耗乘數",restUrlRequired:"REST 插座至少需要一個 URL（ON 或 OFF）",restHeadersHint:'例如：{"Authorization": "Bearer your-token"}',restBodyHint:'例如：ON、{"state": "on"}',restStatusHint:"用於輪詢目前狀態的 URL",restPathHint:"例如：state 或 data.power.status",restPowerUrlHint:"功率資料的獨立URL（留空則使用狀態URL）",restEnergyUrlHint:"能耗資料的獨立URL（留空則使用狀態URL）",restEnergyHint:"每個值可以使用獨立的URL，或回退到狀態 URL。使用乘數進行單位轉換（例如：0.001 將 Wh 轉換為 kWh）。",testConnection:"測試連線",connectionSuccess:"連線成功",noSwitchesInSwitchbar:"開關欄中沒有開關",enableSwitchbarHint:'在設定 > 智慧插座中啟用"在開關欄顯示"'},notifications:{providerTypes:{callmebot:"CallMeBot/WhatsApp",ntfy:"ntfy",pushover:"Pushover",telegram:"Telegram",email:"電子郵件",discord:"Discord",webhook:"Webhook",homeassistant:"Home Assistant"},providerDescriptions:{email:"SMTP 電子郵件通知",telegram:"透過 Telegram 機器人傳送通知",discord:"透過 Webhook 傳送到 Discord 頻道",ntfy:"免費、可自託管的推送通知",pushover:"簡單、可靠的推送通知",callmebot:"透過 CallMeBot 免費傳送 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL",homeassistant:"Home Assistant 儀表板中的持久通知"},lastSuccess:"上次：{{date}}",error:"錯誤",printer:"印表機：",allPrinters:"所有印表機",sendTestNotification:"傳送測試通知",eventSettings:"事件設定",enabled:"已啟用",sendFromProvider:"從此提供者傳送通知",printEvents:"列印事件",printerStatus:"印表機狀態",amsAlarms:"AMS 警報",amsHtAlarms:"AMS-HT 警報",printQueue:"列印佇列",start:"開始",plateCheck:"熱床檢測",complete:"完成",failed:"失敗",stopped:"已停止",progress:"進度",offline:"離線",lowFilament:"耗材不足",maintenance:"維護",amsHumidity:"AMS 濕度",amsTemp:"AMS 溫度",amsHtHumidity:"AMS-HT 濕度",amsHtTemp:"AMS-HT 溫度",bedCooled:"熱床已冷卻",firstLayer:"首層完成",quiet:"免打擾",digest:"摘要 {{time}}",printStarted:"列印已開始",plateNotEmpty:"熱床非空",plateNotEmptyDescription:"列印前偵測到物體",printCompleted:"列印已完成",bedCooledLabel:"熱床已冷卻",bedCooledDescription:"列印後熱床溫度降至閾值以下",firstLayerCompleteLabel:"首層列印完成",firstLayerCompleteDescription:"首層完成時傳送帶照片的通知",missingSpoolAssignmentLabel:"缺少料卷分配",missingSpoolAssignmentDescription:"當列印開始且所需料盤沒有分配料卷時傳送通知",printFailed:"列印失敗",printStopped:"列印已停止",progressMilestones:"進度里程碑",progressMilestonesDescription:"在 25%、50%、75% 時通知",printerOffline:"印表機離線",printerError:"印表機錯誤",lowFilamentLabel:"耗材不足",maintenanceDue:"需要維護",maintenanceDueDescription:"需要維護時通知",amsHumidityHigh:"AMS 濕度過高",amsHumidityHighDescription:"普通 AMS 濕度超過閾值",amsTemperatureHigh:"AMS 溫度過高",amsTemperatureHighDescription:"普通 AMS 溫度超過閾值",amsHtHumidityHigh:"AMS-HT 濕度過高",amsHtHumidityHighDescription:"AMS-HT 濕度超過閾值",amsHtTemperatureHigh:"AMS-HT 溫度過高",amsHtTemperatureHighDescription:"AMS-HT 溫度超過閾值",jobAdded:"任務已新增",jobAddedDescription:"任務已新增到佇列",jobAssigned:"任務已分配",jobAssignedDescription:"基於模型的任務已分配給印表機",jobStarted:"任務已開始",jobStartedDescription:"佇列任務已開始列印",jobWaiting:"任務等待中",jobWaitingDescription:"任務正在等待耗材或印表機",jobSkipped:"任務已跳過",jobSkippedDescription:"任務已跳過（上一個失敗）",jobFailed:"任務失敗",jobFailedDescription:"任務啟動失敗",queueComplete:"佇列已完成",queueCompleteDescription:"所有佇列任務已完成",quietHours:"免打擾時段",noNotificationsDuring:"在此時段內不傳送通知",editProviderToChangeQuietHours:"編輯提供者以更改免打擾時段",dailyDigest:"每日摘要",batchNotifications:"將通知彙總為每日摘要",sendAt:"傳送於 {{time}}",editProviderToChangeDigestTime:"編輯提供者以更改摘要時間",edit:"編輯",deleteProvider:"刪除通知提供者",deleteConfirm:'確定要刪除"{{name}}"嗎？此操作無法復原。',delete:"刪除",addTitle:"新增通知提供者",editTitle:"編輯通知提供者",nameLabel:"名稱 *",namePlaceholder:"我的通知",providerTypeLabel:"提供者類型 *",configuration:"設定",testConfiguration:"測試設定",printerFilter:"印表機篩選",onlyFromPrinter:"僅傳送來自此印表機的事件通知",quietHoursDnd:"免打擾時段",quietStart:"開始",quietEnd:"結束",dailyDigestLabel:"每日摘要",sendDigestAt:"傳送摘要於",digestCollected:"事件將被收集並在此時間作為單條摘要傳送",notificationEvents:"通知事件",progressPercent:"（25%、50%、75%）",bedCooledAfterPrint:"（列印完成後）",eventPriority:{sectionTitle:"ntfy 優先級",helpNtfy:"為每個已啟用的事件選擇優先級。ntfy 使用它來升級提醒（聲音、可見性、推播行為）。此處未設定的級別將使用 ntfy 伺服器預設值。",min:"最低",low:"低",default:"預設",high:"高",urgent:"緊急"},cancel:"取消",save:"儲存",add:"新增",nameRequired:"名稱為必填項",fieldRequired:"{{field}}為必填項",phoneNumber:"電話號碼",apiKey:"API 金鑰",serverUrl:"伺服器 URL",topic:"主題",authToken:"認證權杖",userKey:"使用者金鑰",appToken:"應用程式權杖",priority:"優先順序",botToken:"機器人權杖",chatId:"聊天 ID",smtpServer:"SMTP 伺服器",smtpPort:"SMTP 連接埠",security:"安全",authentication:"認證",username:"使用者名稱",password:"密碼",fromEmail:"寄件人信箱",toEmail:"收件人信箱",webhookUrl:"Webhook URL",payloadFormat:"負載格式",authorization:"授權",titleFieldName:"標題欄位名",messageFieldName:"訊息欄位名",editTemplate:"編輯範本：{{name}}",titleLabel:"標題",bodyLabel:"正文",titlePlaceholder:"通知標題...",bodyPlaceholder:"通知正文...",availableVariables:"可用變數",clickToInsert:"點選插入到正文游標位置",livePreview:"即時預覽",hide:"隱藏",show:"顯示",loadingPreview:"載入預覽中...",enterTemplateContent:"輸入範本內容以檢視預覽",titlePreview:"標題：",bodyPreview:"正文：",resetToDefault:"恢復預設",titleRequired:"標題為必填項",bodyRequired:"正文為必填項",notificationLog:"通知日誌",showFailedOnly:"僅顯示失敗",last24Hours:"最近 24 小時",last7Days:"最近 7 天",last30Days:"最近 30 天",last90Days:"最近 90 天",justNow:"剛剛",noFailedNotifications:"沒有失敗的通知",noNotificationsLogged:"沒有通知紀錄",unknownProvider:"未知提供者",logTitle:"標題",logMessage:"訊息",logError:"錯誤",logProvider:"提供者：{{type}}",logTime:"時間：{{time}}",refresh:"重新整理",clearOld:"清除舊紀錄",statsSummary:"最近 {{days}} 天：",statsNotifications:"條通知",statsSent:"{{count}} 條已傳送",statsFailed:"{{count}} 條失敗",eventTypes:{print_start:"列印已開始",print_complete:"列印完成",print_failed:"列印失敗",print_stopped:"列印已停止",print_progress:"進度",printer_offline:"印表機離線",printer_error:"印表機錯誤",filament_low:"耗材不足",maintenance_due:"需要維護",test:"測試"},userEmail:{title:"通知",emailNotifications:"郵件通知",emailNotificationsDesc:"接收您自己列印任務的郵件通知。郵件將透過進階身份驗證中設定的 SMTP 設定傳送。",sendingTo:"通知將傳送至",noEmailWarning:"您的帳戶沒有郵件地址。請聯絡管理員新增。",printJobNotifications:"列印任務通知",printJobNotificationsDesc:"選擇哪些事件會觸發您提交的列印任務的郵件通知。",printJobStarts:"列印任務開始",printJobStartsDesc:"當您的列印任務開始時收到通知。",printJobFinishes:"列印任務完成",printJobFinishesDesc:"當您的列印任務成功完成時收到通知。",printErrors:"列印錯誤",printErrorsDesc:"當您的列印任務失敗或遇到錯誤時收到通知。",printJobStops:"列印任務停止",printJobStopsDesc:"當您的列印任務被取消或停止時收到通知。",saveSuccess:"通知偏好設定已儲存。",saveError:"儲存通知偏好設定失敗。"}},richTextEditor:{bold:"粗體",italic:"斜體",underline:"底線",bulletList:"無序列表",numberedList:"有序列表",alignLeft:"左對齊",alignCenter:"居中對齊",alignRight:"右對齊",addLink:"新增連結",removeLink:"移除連結"},externalLinks:{noLinksConfigured:"未設定外部連結",deleteLink:"刪除連結",removeCustomIcon:"移除自訂圖示",openInNewTab:"在新標籤頁中開啟",placeholders:{linkName:"我的連結"}},keyboardShortcuts:{title:"鍵盤快捷鍵",navigation:"導航",archivesSection:"歸檔",kProfilesSection:"K 值設定",generalSection:"通用",shortcuts:{goToPrinters:"前往印表機",goToArchives:"前往歸檔",goToQueue:"前往佇列",goToStats:"前往統計",goToProfiles:"前往雲端設定",goToSettings:"前往設定",focusSearch:"聚焦搜尋",openUploadModal:"開啟上傳對話方塊",clearSelection:"清除選擇 / 取消焦點",contextMenu:"卡片右鍵選單",refreshProfiles:"重新整理設定",newProfile:"新增設定",exitSelectionMode:"結束選擇模式",showHelp:"顯示此協助"},footer:"按 Esc 或點選外部關閉"},notificationLog:{title:"通知日誌",events:{printStarted:"列印開始",printComplete:"列印完成",printFailed:"列印失敗",printStopped:"列印停止",progress:"進度",printerOffline:"印表機離線",printerError:"印表機錯誤",lowFilament:"耗材不足",maintenanceDue:"維護到期",test:"測試"},timeAgo:{justNow:"剛剛",minutesAgo:"{{minutes}} 分鐘前",hoursAgo:"{{hours}} 小時前"}},restoreBackup:{title:"恢復備份",restoring:"恢復中...",restoreComplete:"恢復完成",restoreFailed:"恢復失敗",importSettings:"從備份檔案匯入設定",pleaseWait:"請稍候，正在恢復您的資料",clickToSelect:"點選選擇備份檔案（.json 或 .zip）",howDuplicateHandling:"重複處理方式：",categories:{printers:"印表機",smartPlugs:"智慧插座",notificationProviders:"通知提供者",filaments:"耗材",archives:"歸檔",pendingUploads:"待處理上傳",settingsTemplates:"設定和範本"},matchingInfo:{printers:"按序列號匹配",smartPlugs:"按 IP 位址匹配",notificationProviders:"按名稱匹配",filaments:"按名稱 + 類型 + 品牌匹配",archives:"按內容雜湊匹配",pendingUploads:"按檔名匹配",settingsTemplates:"始終覆蓋"},replaceExisting:"替換現有資料",keepExisting:"保留現有資料",replaceDescription:"用備份資料覆蓋已存在的項目",keepDescription:"僅恢復不存在的項目",caution:"注意：",cautionText:"覆蓋將用備份資料替換您目前的設定。出於安全考慮，印表機存取碼永遠不會被覆蓋。",itemsRestored:"已恢復項目",itemsSkipped:"已跳過項目",restored:"已恢復",skipped:"已跳過（已存在）",filesLabel:"檔案（3MF、縮圖等）",newApiKeysGenerated:"已產生新 API 金鑰",newApiKeysWarning:"這些金鑰僅顯示一次。請立即複製！",processingBackup:"處理備份檔案中...",noDataFound:"備份檔案中未找到可恢復的資料。",failedToRestore:"恢復備份失敗。請檢查檔案格式。"},backupExport:{title:"匯出備份",selectData:"選擇要包含的資料",selectAll:"全選",selectNone:"全不選",categoryDescriptions:{settings:"語言、主題、更新偏好",notifications:"ntfy、Pushover、Discord 等",templates:"自訂訊息範本",smartPlugs:"Tasmota 插座設定",externalLinks:"側邊欄外部服務連結",printers:"印表機資訊（不含存取碼）",plateDetection:"空列印板參考影像",filaments:"耗材類型和成本",maintenance:"自訂維護計畫",archives:"所有列印資料 + 檔案（3MF、縮圖、照片）",projects:"專案、材料清單和附件",pendingUploads:"虛擬印表機待審核的上傳",apiKeys:"Webhook API 金鑰（匯入時產生新金鑰）"},requiresPrinters:"需要選擇印表機",zipFileWarning:"將建立 ZIP 檔案。",zipFileDescription:"包括所有 3MF 檔案、縮圖、縮時攝影和照片。這可能需要一些時間並產生較大的檔案。",includeAccessCodes:"包含存取碼",includeAccessCodesDescription:"用於轉移到另一臺機器",includeAccessCodesWarning:"存取碼將以明文形式包含。請妥善保管此備份檔案！",categoriesSelected:"已選擇 {{selectedCount}} 個類別"},pendingUploads:{placeholders:{notes:"新增關於此列印的備註..."},discardUpload:"丟棄上傳",archiveAllUploads:"歸檔所有上傳",discardAllUploads:"丟棄所有上傳",archive:"歸檔",timeAgo:{justNow:"剛剛",minutesAgo:"{{minutes}} 分鐘前",hoursAgo:"{{hours}} 小時前",daysAgo:"{{days}} 天前"}},apiBrowser:{placeholders:{requestBody:"JSON 請求體...",searchEndpoints:"搜尋端點..."}},configureAmsSlot:{title:"設定 AMS 槽位",slotConfigured:"槽位已設定！",configuringSlot:"正在設定槽位：",slotLabel:"{{ams}} 槽位 {{slot}}",searchPresets:"搜尋預設...",colorPlaceholder:"顏色名稱或十六進位（例如：棕色、FF8800）",clearCustomColor:"清除自訂顏色",noCloudPresets:"無雲端預設。登入拓竹雲以同步。",noPresetsAvailable:"無可用預設。登入拓竹雲或匯入本機設定。",noMatchingPresets:"未找到匹配的預設。",custom:"自訂",builtin:"內建",settingsSentToPrinter:"設定已傳送到印表機",filamentProfile:"耗材設定",kProfileLabel:"K 值設定（壓力推進）",filteringFor:"篩選：{{material}}",noKProfile:"無 K 值設定（使用預設值 0.020）",noMatchingKProfiles:"未找到匹配的 K 值設定。將使用預設 K=0.020。",selectFilamentFirst:"請先選擇耗材設定",kFromCalibration:"K={{value}}（來自印表機校準）",customColorLabel:"自訂顏色（可選）",presetColors:"{{name}} 顏色：",showLessColors:"顯示更少顏色",showMoreColors:"顯示更多顏色",clear:"清除",hexLabel:"十六進位：#{{hex}}",resetting:"重設中...",resetSlot:"重設槽位",cancel:"取消",configuring:"設定中...",configureSlot:"設定槽位"},githubBackup:{title:"GitHub 備份",history:"歷史",downloadBackup:"下載備份",restoreBackup:"恢復備份",noBackupsYet:"尚無備份"},emailSettings:{placeholders:{fromName:"BamBuddy"}},tagManagement:{searchTags:"搜尋標籤...",renameTag:"重新命名標籤",deleteTag:"刪除標籤"},notificationTemplates:{placeholders:{title:"通知標題...",body:"通知正文..."}},batchTag:{placeholders:{newTag:"輸入新標籤..."}},photoGallery:{deletePhoto:"刪除照片"},filamentHoverCard:{copySpoolUuid:"複製耗材 UUID"},kProfilesView:{hasNote:"有備註",copyProfile:"複製設定"},layout:{openMenu:"開啟選單",noPermissionSystemInfo:"您沒有檢視系統資訊的權限"},dashboard:{dragToReorder:"拖曳以重新排列",hideWidget:"隱藏小工具"},notificationProviderCard:{deleteNotificationProvider:"刪除通知提供者"},fileManagerModal:{closeFileManager:"關閉檔案管理器",sortFiles:"排序檔案",goToParentFolder:"返回上級資料夾",threeView:"3D 檢視"},embeddedCameraViewer:{refreshStream:"重新整理流",close:"關閉",zoomOut:"縮小",resetZoom:"重設縮放",zoomIn:"放大",dragToResize:"拖曳調整大小"},timelapseViewer:{skipBack5s:"後退 5 秒",skipForward5s:"前進 5 秒"},notificationProviders:{descriptions:{email:"SMTP 郵件通知",telegram:"透過 Telegram 機器人通知",discord:"透過 Webhook 傳送到 Discord 頻道",ntfy:"免費、可自託管的推送通知",pushover:"簡單、可靠的推送通知",callmebot:"透過 CallMeBot 的免費 WhatsApp 通知",webhook:"通用 HTTP POST 到任意 URL"}},logViewer:{searchPlaceholder:"搜尋訊息或日誌名稱...",noLogEntries:"未找到日誌條目"},switchbarPopover:{noSwitchesInSwitchbar:"切換欄中沒有開關"},projectPageModal:{placeholders:{title:"標題",designer:"設計師",license:"許可證",description:"輸入描述...",profileTitle:"設定標題",profileDescription:"設定描述..."}},spoolmanSettings:{},time:{unknown:"-",waiting:"等待中",justNow:"剛剛",now:"現在",minsAgo:"{{count}} 分鐘前",inMins:"{{count}} 分鐘後",hoursAgo:"{{count}} 小時前",inHours:"{{count}} 小時後",daysAgo:"{{count}} 天前",inDays:"{{count}} 天後"},spoolbuddy:{nav:{dashboard:"儀表板",ams:"AMS",inventory:"庫存",writeTag:"寫入",settings:"設定"},status:{nfcReady:"NFC 就緒",nfcOff:"NFC 關閉",offline:"離線",online:"線上",noPrinters:"無印表機",deviceOffline:"裝置離線",waitingConnection:"等待裝置連線...",systemReady:"系統就緒",status:"狀態"},dashboard:{readyToScan:"準備掃描",idleMessage:"將耗材放在磅秤上以識別",nfcHint:"NFC 標籤將自動讀取",device:"裝置",syncWeight:"同步重量",weightSynced:"已同步！",unknownTag:"未知標籤",newTag:"偵測到新標籤",onScale:"在磅秤上",linkSpool:"連結到耗材",linkTagTitle:"將標籤連結到耗材",linkTag:"連結標籤",selectSpool:"選擇要連結此標籤的耗材：",noUntagged:"未找到沒有標籤的耗材",tagDetected:"偵測到標籤",noTag:"無標籤",tagId:"標籤",grossWeight:"毛重",spoolSize:"耗材盤尺寸",close:"關閉",currentSpool:"目前耗材",plateReady:"熱床就緒: {{name}}",plateReadyLabel:"待清理的熱床",plateClearAction:"清理",plateClearedToast:"已將熱床標記為已清理",plateClearFailed:"無法將熱床標記為已清理"},modal:{spoolDetected:"偵測到耗材",assignToAms:"分配到 AMS",syncWeight:"同步重量",weightSynced:"已同步！",syncing:"同步中...",newTagDetected:"偵測到新標籤",addToInventory:"新增到庫存",assignToAmsTitle:"分配到 AMS",selectSlot:"選擇槽位",assign:"分配",assigning:"分配中...",assignSuccess:"已分配！",assignError:"分配耗材失敗。請重試。",noPrinterSelected:"選擇印表機...",noAmsDetected:"此印表機未偵測到 AMS",slot:"槽位"},weight:{noReading:"無讀數",stable:"穩定",measuring:"測量中...",tare:"去皮",calibrate:"校準"},spool:{remaining:"剩餘",material:"材料",brand:"品牌",color:"顏色",coreWeight:"軸心重",labelWeight:"標籤重",scaleWeight:"磅秤重",netWeight:"淨重",lastUsed:"上次使用"},ams:{noData:"未偵測到 AMS",connectAms:"連線 AMS 以檢視耗材槽位",noPrinter:"未選擇印表機",selectPrinter:"從頂部欄選擇印表機",printerDisconnected:"印表機已斷開",humidity:"濕度",level:"餘量",active:"活躍",slot:"槽位",empty:"空"},inventory:{search:"搜尋耗材...",empty:"庫存中沒有耗材",noResults:"沒有匹配的耗材",spools:"個耗材",addSpool:"新增耗材"},settings:{tabDevice:"裝置",tabDisplay:"顯示",tabScale:"磅秤",tabUpdates:"更新",nfcReader:"NFC 讀卡器",type:"類型",connection:"連線",notConnected:"不適用",deviceInfo:"裝置資訊",hostname:"主機",uptime:"執行時間",systemConfig:"後端與認證",backendUrl:"Bambuddy 後端 URL",apiToken:"API 權杖",apiTokenPlaceholder:"輸入 API 權杖",saveConfig:"儲存設定",systemQueued:"設定已加入佇列。",nfcDiagnostic:"NFC 診斷",scaleDiagnostic:"磅秤診斷",readTagDiagnostic:"讀取標籤診斷",testNfc:"測試讀卡器",testScale:"測試精度",testReadTag:"讀取標籤",systemFieldsRequired:"後端 URL 為必填項。",brightness:"亮度",saved:"已儲存",noBacklight:"未偵測到 DSI 背光。亮度控制需要 DSI 螢幕。",screenBlank:"螢幕熄滅超時",screenBlankDesc:"不活動後螢幕關閉。觸控喚醒。",displayNote:"亮度作為軟體濾鏡套用。",scaleCalibration:"磅秤校準",currentWeight:"目前重量",tareOffset:"去皮",calFactor:"係數",knownWeight:"已知重量",calStep1:"移除磅秤上所有物品並按設定零點。",calStep2:"將已知重量放在磅秤上。",setZero:"設定零點",calibrateNow:"校準",calibrated:"已校準",tareSet:"去皮命令已傳送。等待裝置回應...",tareFailed:"傳送去皮命令失敗",zeroSet:"零點已設定。將已知重量放在磅秤上。",calibrationDone:"校準完成！",calibrationFailed:"校準失敗",lastCalibrated:"上次校準",stable:"穩定",settling:"穩定中...",firmware:"韌體",scale:"磅秤",noDevice:"未找到 SpoolBuddy 裝置",daemonVersion:"守護程式版本",currentVersion:"目前",versionPending:"等待守護程式...",checking:"檢查中...",checkUpdates:"檢查更新",updateAvailable:"有可用更新",updateInstructions:"透過 SSH 更新：執行 SpoolBuddy 安裝腳本進行升級。",upToDate:"已是最新",includeBeta:"包含測試版本"},writeTag:{tabExisting:"現有耗材",tabNew:"新耗材",tabReplace:"替換標籤",searchPlaceholder:"按材料、顏色、品牌搜尋...",noUntaggedSpools:"沒有無標籤的耗材",noTaggedSpools:"沒有有標籤的耗材",selectSpool:"選擇一個耗材，然後將空白 NTAG 放在讀卡器上",placeTag:"將 NTAG 放在讀卡器上",tagReady:"偵測到標籤 — 準備寫入",writeTag:"寫入標籤",replaceTag:"替換標籤",writing:"寫入標籤中...",waiting:"等待 SpoolBuddy...",writeSuccess:"標籤寫入成功！",writeFailed:"寫入失敗",queueFailed:"佇列寫入命令失敗",tryAgain:"重試",cancel:"取消",replaceWarning:"舊標籤將被取消連結。新標籤將替換它。",deviceOffline:"SpoolBuddy 離線",material:"材料",colorName:"顏色名稱",color:"顏色",brand:"品牌",weight:"重量 (g)",createSpool:"建立耗材",creating:"建立中...",spoolCreated:"耗材已建立！準備寫入。",createFailed:"建立耗材失敗"},quickMenu:{printerPower:"印表機電源",systemControls:"系統",restartDaemon:"重新啟動守護程式",restartBrowser:"重新啟動瀏覽器",reboot:"重新開機",shutdown:"關機",swipeToClose:"向下滑動關閉",confirmTitle:"確認",confirmShutdown:"確定要關閉 SpoolBuddy 嗎？您需要實體存取才能重新開啟。",confirmReboot:"確定要重新開機 SpoolBuddy 嗎？",confirmRestartDaemon:"重新啟動 SpoolBuddy 守護程式？NFC 和磅秤將暫時不可用。",confirmRestartBrowser:"重新啟動kiosk瀏覽器？螢幕將短暫變黑。",confirm:"確認",confirmPlugOn:"開啟 {{name}}？",confirmPlugOff:"關閉 {{name}}？",turnOn:"開啟",turnOff:"關閉"}},bugReport:{title:"報告錯誤",description:"描述",descriptionPlaceholder:"出了什麼問題？請描述問題...",email:"信箱（可選）",emailPlaceholder:"your@email.com",emailPrivacy:"如果提供，您的信箱將包含在GitHub Issue的摺疊部分中，以便維護者後續跟進。",screenshot:"截圖",uploadOrPaste:"上傳、貼上或拖曳圖片",dataCollectedSummary:"報告中包含哪些資料？",dataIncluded:"包含：",dataIncludedList:"應用程式版本、作業系統、架構、Python版本、資料庫統計（僅計數）、印表機型號、噴嘴數量、韌體版本、連線狀態、整合狀態（Spoolman、MQTT、HA）、非敏感設定、網路介面數量、Docker詳情、依賴版本。",dataNeverIncluded:"絕不包含：",dataNeverIncludedList:"印表機名稱、序列號、存取碼、密碼、IP 位址、信箱地址、API金鑰、權杖、Webhook URL、主機名稱或使用者名稱。",submit:"提交",startLogging:"開始偵錯日誌",stepEnableLogging:"偵錯日誌已啟用",stepReproduce:"請現在重現問題",stepStopLogging:"停止並提交報告",stopAndSubmit:"停止並提交",maxDuration:"{{minutes}} 分鐘後自動停止",stoppingLogs:"正在收集日誌並提交...",submitting:"正在提交錯誤報告...",submitSuccess:"錯誤報告提交成功！",submitFailed:"提交錯誤報告失敗",thankYou:"謝謝！",submitted:"您的錯誤報告已提交。",viewIssue:"檢視 Issue",unexpectedError:"發生了意外錯誤"},failureDetection:{title:"AI 故障檢測",description:"透過自託管的 Obico ML API 監控列印,並對偵測到的故障自動採取行動。",mlUrl:"Obico ML API 地址",mlUrlHint:"您自託管的 Obico ml_api 容器的基礎 URL(例如 http://192.168.1.10:3333)。",test:"測試",testSuccess:"ML API 可存取且正常。",testFailed:"無法存取 ML API。",sensitivity:"靈敏度",sensitivityLow:"低(減少誤報)",sensitivityMedium:"中(平衡)",sensitivityHigh:"高(更早檢測,更多誤報)",sensitivityHint:"調整觸發警告和故障的置信度閾值。",action:"偵測到故障時的操作",actionNotify:"僅通知",actionPause:"暫停列印",actionPauseOff:"暫停並切斷電源",pollInterval:"檢查間隔(秒)",pollIntervalHint:"列印過程中每臺印表機的檢查頻率。最小 5 秒,最大 120 秒。",externalUrlMissing:"尚未設定外部 URL。",externalUrlHint:"ML API 透過 URL 擷取攝影機快照。請在一般設定中設定外部 URL，讓 ML API 容器可以連線到 Bambuddy。",perPrinterTitle:"監控的印表機",perPrinterHint:"選擇檢測服務要監視哪些印表機。",monitorAll:"監控所有已連線的印表機",statusTitle:"狀態",serviceRunning:"服務執行中",thresholds:"低 / 高閾值",activePrinters:"活動列印",noActivePrints:"目前沒有正在進行的列印。",historyTitle:"最近檢測",noHistory:"尚無檢測紀錄。"},makerworld:{title:"MakerWorld",description:"貼上 MakerWorld 模型連結，即可直接在 Bambuddy 中匯入並列印 —— 無需切換至 Bambu Handy 應用程式。",pasteUrlHeader:"從 MakerWorld 匯入",pasteUrlPlaceholder:"https://makerworld.com/en/models/… 或貼上任意 MakerWorld 連結",resolveButton:"解析",signInRequiredTitle:"下載需要登入 Bambu Cloud",signInRequiredBody:"您可以匿名瀏覽模型詳情，但下載 3MF 檔案需要 Bambu Cloud 帳戶。",openCloudSettings:"開啟雲端設定",untitledModel:"無標題模型",byCreator:"作者: {{name}}",downloadsCount:"{{count}} 次下載",licensePrefix:"授權條款",alreadyImported:"已在資料庫中",openOnMakerworld:"在 MakerWorld 中開啟",alreadyInLibrary:"此模型已在您的資料庫中 —— 可在檔案管理員 → MakerWorld 中找到",importSuccess:"已匯入 {{filename}} —— 已儲存至檔案管理員 → MakerWorld",platesHeader:"列印板 ({{count}})",plateDefaultName:"列印板 {{n}}",materialCount:"{{count}} 種耗材",amsRequired:"需要 AMS",slicedFor:"Sliced for {{printer}}",alsoCompatible:"Also marked compatible: {{printers}}",importToLibrary:"儲存",sliceIn:"儲存並在 {{slicer}} 中切片",disclaimer:"MakerWorld 整合使用由社群記錄的 API 介面。Bambuddy 與 MakerWorld 或 Bambu Lab 無從屬或認可關係。",lastImportSuccess:"已匯入您的資料庫",lastImportAlreadyInLibrary:"已存在於您的資料庫中",viewInLibrary:"在檔案管理員中查看",openInBambuStudio:"在 Bambu Studio 中開啟",openInOrcaSlicer:"在 OrcaSlicer 中開啟",importTo:"匯入至檔案管理員",recentImportsHeader:"最近匯入",phaseResolving:"解析中",phaseDownloading:"下載中",folderAuto:"MakerWorld (預設)",importAll:"全部匯入",importAllProgress:"正在匯入 {{current}}/{{total}}",openGallery:"開啟圖片庫",galleryPrev:"上一張",galleryNext:"下一張",deleteImport:"從資料庫中移除",importDeleting:"正在移除…",importDeleted:"已從資料庫中移除",confirmDelete:"從資料庫中移除 {{filename}}？本機檔案將被刪除，但可以從 MakerWorld 重新匯入。",errors:{resolveFailed:"無法解析該 MakerWorld 連結。",downloadFailed:"下載失敗。請重試。",deleteFailed:"無法從資料庫中移除檔案。"}},libraryTrash:{title:"資源回收筒",headerButton:"資源回收筒",headerTooltip:"檢視已移至資源回收筒的檔案",backToFiles:"返回檔案管理員",subtitleAdmin:"已刪除的檔案會在資源回收筒保留 {{days}} 天，之後自動刪除。此檢視顯示所有使用者的資源回收筒。",subtitleUser:"已刪除的檔案會在資源回收筒保留 {{days}} 天，之後自動刪除。",loading:"正在載入資源回收筒…",loadError:"無法載入資源回收筒。",empty:"資源回收筒是空的。",summary:"{{count}} 個檔案 · {{size}}",emptyTrash:"清空資源回收筒",restore:"還原",purgeNow:"立即刪除",autoPurgeIn:"將於 {{when}} 自動刪除",days:"天",retentionLabel:"自動刪除時間",selectAll:"全選",selectOne:"選擇 {{filename}}",selectionCount:"已選擇 {{count}} 項",bulkRestore:"還原所選",bulkPurge:"刪除所選",col:{filename:"檔案",folder:"資料夾",size:"大小",deleted:"移入資源回收筒",autoPurge:"自動刪除",owner:"擁有者",actions:"操作"},confirm:{purgeTitle:"永久刪除？",purgeBody:"{{filename}} 將從磁碟中刪除，無法還原。",emptyTitle:"清空資源回收筒？",emptyBody:"全部 {{count}} 個檔案將從磁碟中刪除。此操作無法復原。",bulkPurgeTitle:"永久刪除所選檔案？",bulkPurgeBody:"所選的 {{count}} 個檔案將從磁碟中刪除，無法還原。",cta:"永久刪除"},toast:{restored:"檔案已還原。",restoreFailed:"無法還原檔案。",purged:"檔案已永久刪除。",purgeFailed:"無法刪除檔案。",emptied:"已從資源回收筒刪除 {{count}} 個檔案。",emptyFailed:"無法清空資源回收筒。",retentionSaved:"自動刪除已設定為 {{days}} 天。",retentionFailed:"無法儲存保留設定。",bulkRestored:"已還原 {{count}} 個檔案。",bulkPurged:"已刪除 {{count}} 個檔案。"}},libraryPurge:{title:"清理舊檔案",headerButton:"清理舊檔案",headerTooltip:"批次將舊檔案移至資源回收筒",description:"早於所選時間的檔案將被移至資源回收筒。外部資料夾會被略過。在自動刪除之前，您可以從資源回收筒還原檔案。",ageLabel:"移動早於以下天數的檔案",days:"天",includeNeverPrinted:"包括從未列印過的檔案",effectsTitle:"What happens when you click Purge",effect1:"Matching files are moved to Trash — they are not deleted from disk yet.",effect2:"You can restore them from Trash at any time until the retention window expires.",effect3:"After retention, the trash sweeper permanently removes them from disk.",effect4:"Files in external (linked) folders are skipped — Bambuddy never deletes bytes it does not own.",previewLoading:"正在檢查符合的檔案數量…",previewFailed:"無法預覽清理結果。",previewSummary:"{{count}} 個檔案 · {{size}} 將被移至資源回收筒",andMore:"…還有 {{count}} 個",warning:"檔案將被軟刪除——在保留期結束前，您可以從資源回收筒還原它們。",confirmCta:"將 {{count}} 個移至資源回收筒",purging:"正在移至資源回收筒…",toast:{success:"已將 {{count}} 個檔案移至資源回收筒。",failed:"無法清理檔案。"}},libraryAutoPurge:{enableLabel:"自動清理舊檔案",enableDescription:"每天執行一次管理員清理。檔案會先進入資源回收筒——不會立即刪除。",ageLabel:"自動清理早於以下天數的檔案",ageDescription:"最少 7 天，最多 10 年。使用與手動「清理舊檔案」按鈕相同的時間規則。",days:"天",includeNeverPrinted:"包括從未列印過的檔案",saveFailed:"無法儲存自動清理設定。"},archivePurge:{headerButton:"Purge old",headerTooltip:"Bulk-delete old archives",title:"Purge old archives",description:"Clear out old print history. Each archive is aged by its most recent print completion — reprinting an archive refreshes its age, so active work is never purged.",ageLabel:"Delete archives not printed in the last",days:"days",effectsTitle:"What happens when you click Purge",effect1:"Each matching archive is permanently removed from the database.",effect2:"The 3MF, thumbnail, timelapse, source 3MF, F3D design file, and photo folder are all deleted from disk.",effect3:"There is no trash bin for archives — deletion is immediate and cannot be undone.",effect4:"Reprinting an archive refreshes its age clock, so archives you still use are safe.",previewLoading:"Checking how many archives match…",previewFailed:"Could not preview the purge.",previewSummary:"{{count}} archives · {{size}} would be deleted",andMore:"…and {{count}} more",warning:"This is permanent. Download or favourite anything you want to keep before continuing.",confirmCta:"Delete {{count}} archive(s)",purging:"Deleting…",toast:{success:"Deleted {{count}} archive(s).",failed:"Could not purge archives."}},archiveAutoPurge:{enableLabel:"Auto-purge old archives",enableDescription:"Once per day, permanently deletes archives that have not been printed within the threshold. Reprinting an archive resets the clock. No trash bin — deletion is immediate.",ageLabel:"Auto-delete archives not printed in the last",ageDescription:"Minimum 7 days, maximum 10 years. Based on the most recent print completion — reprinting an archive refreshes its age. Deletes the archive, 3MF, thumbnail, timelapse, and photos.",days:"days",runNow:"Purge archives now",saveFailed:"Could not save auto-purge settings."},cameraTokens:{title:"Camera API Tokens",navTitle:"Camera API tokens",description:"Long-lived tokens for embedding the camera stream into Home Assistant, Frigate, kiosks, or any other tool that needs a stable URL. Each token is camera-stream-only and can be revoked at any time.",loading:"Loading…",confirmRevoke:{title:"Revoke this token?",body:'Any device using "{{name}}" will lose access immediately. This cannot be undone.',cancel:"Cancel",confirm:"Revoke"},create:{title:"Create new token",nameLabel:"Token name",namePlaceholder:"e.g. Home Assistant",daysLabel:"Days until expiry",submit:"Create",hint:"Maximum lifetime is 365 days. The token value is shown only once on creation — copy it now."},created:{title:"Token created — copy it now",warning:"This is the only time this token will be visible. After you close this dialog you can never view it again.",copy:"Copy",dismiss:"I've saved it"},list:{myTitle:"My tokens",allTitle:"All users (admin view)",empty:"No tokens yet.",name:"Name",owner:"Owner",prefix:"Prefix",created:"Created",expires:"Expires",lastUsed:"Last used",revoke:"Revoke",expired:"Expired"},toast:{created:"Token created",createFailed:"Failed to create token",revoked:"Token revoked",revokeFailed:"Failed to revoke token",loadFailed:"Failed to load tokens",copied:"Copied to clipboard",copyFailed:"Copy failed — select and copy manually"}}},Pme={en:{translation:yme},de:{translation:vme},fr:{translation:wme},ja:{translation:Sme},it:{translation:_me},"pt-BR":{translation:kme},"zh-CN":{translation:Nme},"zh-TW":{translation:Cme}};yo.use(vQ).use(Que).init({resources:Pme,fallbackLng:"en",supportedLngs:["en","de","fr","ja","it","pt-BR","zh-CN","zh-TW"],detection:{order:["localStorage","navigator","htmlTag"],lookupLocalStorage:"bambutrack_language",caches:["localStorage"]},interpolation:{escapeValue:!1},react:{useSuspense:!1}});const CH=[{code:"en",name:"English",nativeName:"English"},{code:"de",name:"German",nativeName:"Deutsch"},{code:"fr",name:"French",nativeName:"Français"},{code:"ja",name:"Japanese",nativeName:"日本語"},{code:"it",name:"Italian",nativeName:"Italiano"},{code:"pt-BR",name:"Portuguese (Brazil)",nativeName:"Português (Brasil)"},{code:"zh-CN",name:"Chinese (Simplified)",nativeName:"简体中文"},{code:"zh-TW",name:"Chinese (Traditional)",nativeName:"繁體中文"}];var PH="popstate";function Tme(t={}){function e(r,i){let{pathname:s,search:o,hash:l}=r.location;return sF("",{pathname:s,search:o,hash:l},i.state&&i.state.usr||null,i.state&&i.state.key||"default")}function n(r,i){return typeof i=="string"?i:sw(i)}return jme(e,n,null,t)}function Ea(t,e){if(t===!1||t===null||typeof t>"u")throw new Error(e)}function oc(t,e){if(!t){typeof console<"u"&&console.warn(e);try{throw new Error(e)}catch{}}}function Ame(){return Math.random().toString(36).substring(2,10)}function TH(t,e){return{usr:t.state,key:t.key,idx:e}}function sF(t,e,n=null,r){return{pathname:typeof t=="string"?t:t.pathname,search:"",hash:"",...typeof e=="string"?_y(e):e,state:n,key:e&&e.key||r||Ame()}}function sw({pathname:t="/",search:e="",hash:n=""}){return e&&e!=="?"&&(t+=e.charAt(0)==="?"?e:"?"+e),n&&n!=="#"&&(t+=n.charAt(0)==="#"?n:"#"+n),t}function _y(t){let e={};if(t){let n=t.indexOf("#");n>=0&&(e.hash=t.substring(n),t=t.substring(0,n));let r=t.indexOf("?");r>=0&&(e.search=t.substring(r),t=t.substring(0,r)),t&&(e.pathname=t)}return e}function jme(t,e,n,r={}){let{window:i=document.defaultView,v5Compat:s=!1}=r,o=i.history,l="POP",c=null,d=u();d==null&&(d=0,o.replaceState({...o.state,idx:d},""));function u(){return(o.state||{idx:null}).idx}function m(){l="POP";let b=u(),g=b==null?null:b-d;d=b,c&&c({action:l,location:v.location,delta:g})}function p(b,g){l="PUSH";let S=sF(v.location,b,g);d=u()+1;let N=TH(S,d),P=v.createHref(S);try{o.pushState(N,"",P)}catch(C){if(C instanceof DOMException&&C.name==="DataCloneError")throw C;i.location.assign(P)}s&&c&&c({action:l,location:v.location,delta:1})}function f(b,g){l="REPLACE";let S=sF(v.location,b,g);d=u();let N=TH(S,d),P=v.createHref(S);o.replaceState(N,"",P),s&&c&&c({action:l,location:v.location,delta:0})}function x(b){return Mme(b)}let v={get action(){return l},get location(){return t(i,o)},listen(b){if(c)throw new Error("A history only accepts one active listener");return i.addEventListener(PH,m),c=b,()=>{i.removeEventListener(PH,m),c=null}},createHref(b){return e(i,b)},createURL:x,encodeLocation(b){let g=x(b);return{pathname:g.pathname,search:g.search,hash:g.hash}},push:p,replace:f,go(b){return o.go(b)}};return v}function Mme(t,e=!1){let n="http://localhost";typeof window<"u"&&(n=window.location.origin!=="null"?window.location.origin:window.location.href),Ea(n,"No window.location.(origin|href) available to create URL");let r=typeof t=="string"?t:sw(t);return r=r.replace(/ $/,"%20"),!e&&r.startsWith("//")&&(r=n+r),new URL(r,n)}function wQ(t,e,n="/"){return Eme(t,e,n,!1)}function Eme(t,e,n,r){let i=typeof e=="string"?_y(e):e,s=bm(i.pathname||"/",n);if(s==null)return null;let o=SQ(t);Dme(o);let l=null;for(let c=0;l==null&&c<o.length;++c){let d=$me(s);l=Hme(o[c],d,r)}return l}function SQ(t,e=[],n=[],r="",i=!1){let s=(o,l,c=i,d)=>{let u={relativePath:d===void 0?o.path||"":d,caseSensitive:o.caseSensitive===!0,childrenIndex:l,route:o};if(u.relativePath.startsWith("/")){if(!u.relativePath.startsWith(r)&&c)return;Ea(u.relativePath.startsWith(r),`Absolute route path "${u.relativePath}" nested under path "${r}" is not valid. An absolute child route path must start with the combined path of all its parent routes.`),u.relativePath=u.relativePath.slice(r.length)}let m=om([r,u.relativePath]),p=n.concat(u);o.children&&o.children.length>0&&(Ea(o.index!==!0,`Index routes must not have child routes. Please remove all child routes from route path "${m}".`),SQ(o.children,e,p,m,c)),!(o.path==null&&!o.index)&&e.push({path:m,score:Ume(m,o.index),routesMeta:p})};return t.forEach((o,l)=>{if(o.path===""||!o.path?.includes("?"))s(o,l);else for(let c of _Q(o.path))s(o,l,!0,c)}),e}function _Q(t){let e=t.split("/");if(e.length===0)return[];let[n,...r]=e,i=n.endsWith("?"),s=n.replace(/\?$/,"");if(r.length===0)return i?[s,""]:[s];let o=_Q(r.join("/")),l=[];return l.push(...o.map(c=>c===""?s:[s,c].join("/"))),i&&l.push(...o),l.map(c=>t.startsWith("/")&&c===""?"/":c)}function Dme(t){t.sort((e,n)=>e.score!==n.score?n.score-e.score:Bme(e.routesMeta.map(r=>r.childrenIndex),n.routesMeta.map(r=>r.childrenIndex)))}var Fme=/^:[\w-]+$/,Rme=3,Lme=2,Ime=1,Ome=10,zme=-2,AH=t=>t==="*";function Ume(t,e){let n=t.split("/"),r=n.length;return n.some(AH)&&(r+=zme),e&&(r+=Lme),n.filter(i=>!AH(i)).reduce((i,s)=>i+(Fme.test(s)?Rme:s===""?Ime:Ome),r)}function Bme(t,e){return t.length===e.length&&t.slice(0,-1).every((r,i)=>r===e[i])?t[t.length-1]-e[e.length-1]:0}function Hme(t,e,n=!1){let{routesMeta:r}=t,i={},s="/",o=[];for(let l=0;l<r.length;++l){let c=r[l],d=l===r.length-1,u=s==="/"?e:e.slice(s.length)||"/",m=SN({path:c.relativePath,caseSensitive:c.caseSensitive,end:d},u),p=c.route;if(!m&&d&&n&&!r[r.length-1].route.index&&(m=SN({path:c.relativePath,caseSensitive:c.caseSensitive,end:!1},u)),!m)return null;Object.assign(i,m.params),o.push({params:i,pathname:om([s,m.pathname]),pathnameBase:Kme(om([s,m.pathnameBase])),route:p}),m.pathnameBase!=="/"&&(s=om([s,m.pathnameBase]))}return o}function SN(t,e){typeof t=="string"&&(t={path:t,caseSensitive:!1,end:!0});let[n,r]=qme(t.path,t.caseSensitive,t.end),i=e.match(n);if(!i)return null;let s=i[0],o=s.replace(/(.)\/+$/,"$1"),l=i.slice(1);return{params:r.reduce((d,{paramName:u,isOptional:m},p)=>{if(u==="*"){let x=l[p]||"";o=s.slice(0,s.length-x.length).replace(/(.)\/+$/,"$1")}const f=l[p];return m&&!f?d[u]=void 0:d[u]=(f||"").replace(/%2F/g,"/"),d},{}),pathname:s,pathnameBase:o,pattern:t}}function qme(t,e=!1,n=!0){oc(t==="*"||!t.endsWith("*")||t.endsWith("/*"),`Route path "${t}" will be treated as if it were "${t.replace(/\*$/,"/*")}" because the \`*\` character must always follow a \`/\` in the pattern. To get rid of this warning, please change the route path to "${t.replace(/\*$/,"/*")}".`);let r=[],i="^"+t.replace(/\/*\*?$/,"").replace(/^\/*/,"/").replace(/[\\.*+^${}|()[\]]/g,"\\$&").replace(/\/:([\w-]+)(\?)?/g,(o,l,c)=>(r.push({paramName:l,isOptional:c!=null}),c?"/?([^\\/]+)?":"/([^\\/]+)")).replace(/\/([\w-]+)\?(\/|$)/g,"(/$1)?$2");return t.endsWith("*")?(r.push({paramName:"*"}),i+=t==="*"||t==="/*"?"(.*)$":"(?:\\/(.+)|\\/*)$"):n?i+="\\/*$":t!==""&&t!=="/"&&(i+="(?:(?=\\/|$))"),[new RegExp(i,e?void 0:"i"),r]}function $me(t){try{return t.split("/").map(e=>decodeURIComponent(e).replace(/\//g,"%2F")).join("/")}catch(e){return oc(!1,`The URL path "${t}" could not be decoded because it is a malformed URL segment. This is probably due to a bad percent encoding (${e}).`),t}}function bm(t,e){if(e==="/")return t;if(!t.toLowerCase().startsWith(e.toLowerCase()))return null;let n=e.endsWith("/")?e.length-1:e.length,r=t.charAt(n);return r&&r!=="/"?null:t.slice(n)||"/"}var Vme=/^(?:[a-z][a-z0-9+.-]*:|\/\/)/i;function Gme(t,e="/"){let{pathname:n,search:r="",hash:i=""}=typeof t=="string"?_y(t):t,s;return n?(n=n.replace(/\/\/+/g,"/"),n.startsWith("/")?s=jH(n.substring(1),"/"):s=jH(n,e)):s=e,{pathname:s,search:Xme(r),hash:Yme(i)}}function jH(t,e){let n=e.replace(/\/+$/,"").split("/");return t.split("/").forEach(i=>{i===".."?n.length>1&&n.pop():i!=="."&&n.push(i)}),n.length>1?n.join("/"):"/"}function FM(t,e,n,r){return`Cannot include a '${t}' character in a manually specified \`to.${e}\` field [${JSON.stringify(r)}].  Please separate it out to the \`to.${n}\` field. Alternatively you may provide the full path as a string in <Link to="..."> and the router will parse it for you.`}function Wme(t){return t.filter((e,n)=>n===0||e.route.path&&e.route.path.length>0)}function EI(t){let e=Wme(t);return e.map((n,r)=>r===e.length-1?n.pathname:n.pathnameBase)}function DI(t,e,n,r=!1){let i;typeof t=="string"?i=_y(t):(i={...t},Ea(!i.pathname||!i.pathname.includes("?"),FM("?","pathname","search",i)),Ea(!i.pathname||!i.pathname.includes("#"),FM("#","pathname","hash",i)),Ea(!i.search||!i.search.includes("#"),FM("#","search","hash",i)));let s=t===""||i.pathname==="",o=s?"/":i.pathname,l;if(o==null)l=n;else{let m=e.length-1;if(!r&&o.startsWith("..")){let p=o.split("/");for(;p[0]==="..";)p.shift(),m-=1;i.pathname=p.join("/")}l=m>=0?e[m]:"/"}let c=Gme(i,l),d=o&&o!=="/"&&o.endsWith("/"),u=(s||o===".")&&n.endsWith("/");return!c.pathname.endsWith("/")&&(d||u)&&(c.pathname+="/"),c}var om=t=>t.join("/").replace(/\/\/+/g,"/"),Kme=t=>t.replace(/\/+$/,"").replace(/^\/*/,"/"),Xme=t=>!t||t==="?"?"":t.startsWith("?")?t:"?"+t,Yme=t=>!t||t==="#"?"":t.startsWith("#")?t:"#"+t,Qme=class{constructor(t,e,n,r=!1){this.status=t,this.statusText=e||"",this.internal=r,n instanceof Error?(this.data=n.toString(),this.error=n):this.data=n}};function Jme(t){return t!=null&&typeof t.status=="number"&&typeof t.statusText=="string"&&typeof t.internal=="boolean"&&"data"in t}function Zme(t){return t.map(e=>e.route.path).filter(Boolean).join("/").replace(/\/\/*/g,"/")||"/"}var kQ=typeof window<"u"&&typeof window.document<"u"&&typeof window.document.createElement<"u";function NQ(t,e){let n=t;if(typeof n!="string"||!Vme.test(n))return{absoluteURL:void 0,isExternal:!1,to:n};let r=n,i=!1;if(kQ)try{let s=new URL(window.location.href),o=n.startsWith("//")?new URL(s.protocol+n):new URL(n),l=bm(o.pathname,e);o.origin===s.origin&&l!=null?n=l+o.search+o.hash:i=!0}catch{oc(!1,`<Link to="${n}"> contains an invalid URL which will probably break when clicked - please update to a valid URL path.`)}return{absoluteURL:r,isExternal:i,to:n}}Object.getOwnPropertyNames(Object.prototype).sort().join("\0");var CQ=["POST","PUT","PATCH","DELETE"];new Set(CQ);var ehe=["GET",...CQ];new Set(ehe);var ky=w.createContext(null);ky.displayName="DataRouter";var XP=w.createContext(null);XP.displayName="DataRouterState";var the=w.createContext(!1),PQ=w.createContext({isTransitioning:!1});PQ.displayName="ViewTransition";var nhe=w.createContext(new Map);nhe.displayName="Fetchers";var rhe=w.createContext(null);rhe.displayName="Await";var xl=w.createContext(null);xl.displayName="Navigation";var eS=w.createContext(null);eS.displayName="Location";var bc=w.createContext({outlet:null,matches:[],isDataRoute:!1});bc.displayName="Route";var FI=w.createContext(null);FI.displayName="RouteError";var TQ="REACT_ROUTER_ERROR",ahe="REDIRECT",ihe="ROUTE_ERROR_RESPONSE";function she(t){if(t.startsWith(`${TQ}:${ahe}:{`))try{let e=JSON.parse(t.slice(28));if(typeof e=="object"&&e&&typeof e.status=="number"&&typeof e.statusText=="string"&&typeof e.location=="string"&&typeof e.reloadDocument=="boolean"&&typeof e.replace=="boolean")return e}catch{}}function ohe(t){if(t.startsWith(`${TQ}:${ihe}:{`))try{let e=JSON.parse(t.slice(40));if(typeof e=="object"&&e&&typeof e.status=="number"&&typeof e.statusText=="string")return new Qme(e.status,e.statusText,e.data)}catch{}}function lhe(t,{relative:e}={}){Ea(Ny(),"useHref() may be used only in the context of a <Router> component.");let{basename:n,navigator:r}=w.useContext(xl),{hash:i,pathname:s,search:o}=nS(t,{relative:e}),l=s;return n!=="/"&&(l=s==="/"?n:om([n,s])),r.createHref({pathname:l,search:o,hash:i})}function Ny(){return w.useContext(eS)!=null}function Qc(){return Ea(Ny(),"useLocation() may be used only in the context of a <Router> component."),w.useContext(eS).location}var AQ="You should call navigate() in a React.useEffect(), not when your component is first rendered.";function jQ(t){w.useContext(xl).static||w.useLayoutEffect(t)}function as(){let{isDataRoute:t}=w.useContext(bc);return t?She():che()}function che(){Ea(Ny(),"useNavigate() may be used only in the context of a <Router> component.");let t=w.useContext(ky),{basename:e,navigator:n}=w.useContext(xl),{matches:r}=w.useContext(bc),{pathname:i}=Qc(),s=JSON.stringify(EI(r)),o=w.useRef(!1);return jQ(()=>{o.current=!0}),w.useCallback((c,d={})=>{if(oc(o.current,AQ),!o.current)return;if(typeof c=="number"){n.go(c);return}let u=DI(c,JSON.parse(s),i,d.relative==="path");t==null&&e!=="/"&&(u.pathname=u.pathname==="/"?e:om([e,u.pathname])),(d.replace?n.replace:n.push)(u,d.state,d)},[e,n,s,i,t])}var MQ=w.createContext(null);function Cy(){return w.useContext(MQ)}function dhe(t){let e=w.useContext(bc).outlet;return w.useMemo(()=>e&&w.createElement(MQ.Provider,{value:t},e),[e,t])}function tS(){let{matches:t}=w.useContext(bc),e=t[t.length-1];return e?e.params:{}}function nS(t,{relative:e}={}){let{matches:n}=w.useContext(bc),{pathname:r}=Qc(),i=JSON.stringify(EI(n));return w.useMemo(()=>DI(t,JSON.parse(i),r,e==="path"),[t,i,r,e])}function uhe(t,e){return EQ(t,e)}function EQ(t,e,n,r,i){Ea(Ny(),"useRoutes() may be used only in the context of a <Router> component.");let{navigator:s}=w.useContext(xl),{matches:o}=w.useContext(bc),l=o[o.length-1],c=l?l.params:{},d=l?l.pathname:"/",u=l?l.pathnameBase:"/",m=l&&l.route;{let S=m&&m.path||"";FQ(d,!m||S.endsWith("*")||S.endsWith("*?"),`You rendered descendant <Routes> (or called \`useRoutes()\`) at "${d}" (under <Route path="${S}">) but the parent route path has no trailing "*". This means if you navigate deeper, the parent won't match anymore and therefore the child routes will never render.
 
-Please change the parent <Route path="${S}"> to <Route path="${S==="/"?"*":`${S}/*`}">.`)}let p=Qc(),f;if(e){let S=typeof e=="string"?_y(e):e;Ea(u==="/"||S.pathname?.startsWith(u),`When overriding the location using \`<Routes location>\` or \`useRoutes(routes, location)\`, the location pathname must begin with the portion of the URL pathname that was matched by all parent routes. The current pathname base is "${u}" but pathname "${S.pathname}" was given in the \`location\` prop.`),f=S}else f=p;let x=f.pathname||"/",v=x;if(u!=="/"){let S=u.replace(/^\//,"").split("/");v="/"+x.replace(/^\//,"").split("/").slice(S.length).join("/")}let b=wQ(t,{pathname:v});oc(m||b!=null,`No routes matched location "${f.pathname}${f.search}${f.hash}" `),oc(b==null||b[b.length-1].route.element!==void 0||b[b.length-1].route.Component!==void 0||b[b.length-1].route.lazy!==void 0,`Matched leaf route at location "${f.pathname}${f.search}${f.hash}" does not have an element or Component. This means it will render an <Outlet /> with a null value by default resulting in an "empty" page.`);let g=ghe(b&&b.map(S=>Object.assign({},S,{params:Object.assign({},c,S.params),pathname:om([u,s.encodeLocation?s.encodeLocation(S.pathname.replace(/\?/g,"%3F").replace(/#/g,"%23")).pathname:S.pathname]),pathnameBase:S.pathnameBase==="/"?u:om([u,s.encodeLocation?s.encodeLocation(S.pathnameBase.replace(/\?/g,"%3F").replace(/#/g,"%23")).pathname:S.pathnameBase])})),o,n,r,i);return e&&g?w.createElement(eS.Provider,{value:{location:{pathname:"/",search:"",hash:"",state:null,key:"default",...f},navigationType:"POP"}},g):g}function mhe(){let t=whe(),e=Jme(t)?`${t.status} ${t.statusText}`:t instanceof Error?t.message:JSON.stringify(t),n=t instanceof Error?t.stack:null,r="rgba(200,200,200, 0.5)",i={padding:"0.5rem",backgroundColor:r},s={padding:"2px 4px",backgroundColor:r},o=null;return console.error("Error handled by React Router default ErrorBoundary:",t),o=w.createElement(w.Fragment,null,w.createElement("p",null,"💿 Hey developer 👋"),w.createElement("p",null,"You can provide a way better UX than this when your app throws errors by providing your own ",w.createElement("code",{style:s},"ErrorBoundary")," or"," ",w.createElement("code",{style:s},"errorElement")," prop on your route.")),w.createElement(w.Fragment,null,w.createElement("h2",null,"Unexpected Application Error!"),w.createElement("h3",{style:{fontStyle:"italic"}},e),n?w.createElement("pre",{style:i},n):null,o)}var hhe=w.createElement(mhe,null),DQ=class extends w.Component{constructor(t){super(t),this.state={location:t.location,revalidation:t.revalidation,error:t.error}}static getDerivedStateFromError(t){return{error:t}}static getDerivedStateFromProps(t,e){return e.location!==t.location||e.revalidation!=="idle"&&t.revalidation==="idle"?{error:t.error,location:t.location,revalidation:t.revalidation}:{error:t.error!==void 0?t.error:e.error,location:e.location,revalidation:t.revalidation||e.revalidation}}componentDidCatch(t,e){this.props.onError?this.props.onError(t,e):console.error("React Router caught the following error during render",t)}render(){let t=this.state.error;if(this.context&&typeof t=="object"&&t&&"digest"in t&&typeof t.digest=="string"){const n=ohe(t.digest);n&&(t=n)}let e=t!==void 0?w.createElement(bc.Provider,{value:this.props.routeContext},w.createElement(FI.Provider,{value:t,children:this.props.component})):this.props.children;return this.context?w.createElement(phe,{error:t},e):e}};DQ.contextType=the;var RM=new WeakMap;function phe({children:t,error:e}){let{basename:n}=w.useContext(xl);if(typeof e=="object"&&e&&"digest"in e&&typeof e.digest=="string"){let r=she(e.digest);if(r){let i=RM.get(e);if(i)throw i;let s=NQ(r.location,n);if(kQ&&!RM.get(e))if(s.isExternal||r.reloadDocument)window.location.href=s.absoluteURL||s.to;else{const o=Promise.resolve().then(()=>window.__reactRouterDataRouter.navigate(s.to,{replace:r.replace}));throw RM.set(e,o),o}return w.createElement("meta",{httpEquiv:"refresh",content:`0;url=${s.absoluteURL||s.to}`})}}return t}function fhe({routeContext:t,match:e,children:n}){let r=w.useContext(ky);return r&&r.static&&r.staticContext&&(e.route.errorElement||e.route.ErrorBoundary)&&(r.staticContext._deepestRenderedBoundaryId=e.route.id),w.createElement(bc.Provider,{value:t},n)}function ghe(t,e=[],n=null,r=null,i=null){if(t==null){if(!n)return null;if(n.errors)t=n.matches;else if(e.length===0&&!n.initialized&&n.matches.length>0)t=n.matches;else return null}let s=t,o=n?.errors;if(o!=null){let u=s.findIndex(m=>m.route.id&&o?.[m.route.id]!==void 0);Ea(u>=0,`Could not find a matching route for errors on route IDs: ${Object.keys(o).join(",")}`),s=s.slice(0,Math.min(s.length,u+1))}let l=!1,c=-1;if(n)for(let u=0;u<s.length;u++){let m=s[u];if((m.route.HydrateFallback||m.route.hydrateFallbackElement)&&(c=u),m.route.id){let{loaderData:p,errors:f}=n,x=m.route.loader&&!p.hasOwnProperty(m.route.id)&&(!f||f[m.route.id]===void 0);if(m.route.lazy||x){l=!0,c>=0?s=s.slice(0,c+1):s=[s[0]];break}}}let d=n&&r?(u,m)=>{r(u,{location:n.location,params:n.matches?.[0]?.params??{},unstable_pattern:Zme(n.matches),errorInfo:m})}:void 0;return s.reduceRight((u,m,p)=>{let f,x=!1,v=null,b=null;n&&(f=o&&m.route.id?o[m.route.id]:void 0,v=m.route.errorElement||hhe,l&&(c<0&&p===0?(FQ("route-fallback",!1,"No `HydrateFallback` element provided to render during initial hydration"),x=!0,b=null):c===p&&(x=!0,b=m.route.hydrateFallbackElement||null)));let g=e.concat(s.slice(0,p+1)),S=()=>{let N;return f?N=v:x?N=b:m.route.Component?N=w.createElement(m.route.Component,null):m.route.element?N=m.route.element:N=u,w.createElement(fhe,{match:m,routeContext:{outlet:u,matches:g,isDataRoute:n!=null},children:N})};return n&&(m.route.ErrorBoundary||m.route.errorElement||p===0)?w.createElement(DQ,{location:n.location,revalidation:n.revalidation,component:v,error:f,children:S(),routeContext:{outlet:null,matches:g,isDataRoute:!0},onError:d}):S()},null)}function RI(t){return`${t} must be used within a data router.  See https://reactrouter.com/en/main/routers/picking-a-router.`}function bhe(t){let e=w.useContext(ky);return Ea(e,RI(t)),e}function xhe(t){let e=w.useContext(XP);return Ea(e,RI(t)),e}function yhe(t){let e=w.useContext(bc);return Ea(e,RI(t)),e}function LI(t){let e=yhe(t),n=e.matches[e.matches.length-1];return Ea(n.route.id,`${t} can only be used on routes that contain a unique "id"`),n.route.id}function vhe(){return LI("useRouteId")}function whe(){let t=w.useContext(FI),e=xhe("useRouteError"),n=LI("useRouteError");return t!==void 0?t:e.errors?.[n]}function She(){let{router:t}=bhe("useNavigate"),e=LI("useNavigate"),n=w.useRef(!1);return jQ(()=>{n.current=!0}),w.useCallback(async(i,s={})=>{oc(n.current,AQ),n.current&&(typeof i=="number"?await t.navigate(i):await t.navigate(i,{fromRouteId:e,...s}))},[t,e])}var MH={};function FQ(t,e,n){!e&&!MH[t]&&(MH[t]=!0,oc(!1,n))}w.memo(_he);function _he({routes:t,future:e,state:n,onError:r}){return EQ(t,void 0,n,r,e)}function Jf({to:t,replace:e,state:n,relative:r}){Ea(Ny(),"<Navigate> may be used only in the context of a <Router> component.");let{static:i}=w.useContext(xl);oc(!i,"<Navigate> must not be used on the initial render in a <StaticRouter>. This is a no-op, but you should modify your code so the <Navigate> is only ever rendered in response to some user interaction or state change.");let{matches:s}=w.useContext(bc),{pathname:o}=Qc(),l=as(),c=DI(t,EI(s),o,r==="path"),d=JSON.stringify(c);return w.useEffect(()=>{l(JSON.parse(d),{replace:e,state:n,relative:r})},[l,d,r,e,n]),null}function RQ(t){return dhe(t.context)}function _r(t){Ea(!1,"A <Route> is only ever to be used as the child of <Routes> element, never rendered directly. Please wrap your <Route> in a <Routes>.")}function khe({basename:t="/",children:e=null,location:n,navigationType:r="POP",navigator:i,static:s=!1,unstable_useTransitions:o}){Ea(!Ny(),"You cannot render a <Router> inside another <Router>. You should never have more than one in your app.");let l=t.replace(/^\/*/,"/"),c=w.useMemo(()=>({basename:l,navigator:i,static:s,unstable_useTransitions:o,future:{}}),[l,i,s,o]);typeof n=="string"&&(n=_y(n));let{pathname:d="/",search:u="",hash:m="",state:p=null,key:f="default"}=n,x=w.useMemo(()=>{let v=bm(d,l);return v==null?null:{location:{pathname:v,search:u,hash:m,state:p,key:f},navigationType:r}},[l,d,u,m,p,f,r]);return oc(x!=null,`<Router basename="${l}"> is not able to match the URL "${d}${u}${m}" because it does not start with the basename, so the <Router> won't render anything.`),x==null?null:w.createElement(xl.Provider,{value:c},w.createElement(eS.Provider,{children:e,value:x}))}function Nhe({children:t,location:e}){return uhe(oF(t),e)}function oF(t,e=[]){let n=[];return w.Children.forEach(t,(r,i)=>{if(!w.isValidElement(r))return;let s=[...e,i];if(r.type===w.Fragment){n.push.apply(n,oF(r.props.children,s));return}Ea(r.type===_r,`[${typeof r.type=="string"?r.type:r.type.name}] is not a <Route> component. All component children of <Routes> must be a <Route> or <React.Fragment>`),Ea(!r.props.index||!r.props.children,"An index route cannot have child routes.");let o={id:r.props.id||s.join("-"),caseSensitive:r.props.caseSensitive,element:r.props.element,Component:r.props.Component,index:r.props.index,path:r.props.path,middleware:r.props.middleware,loader:r.props.loader,action:r.props.action,hydrateFallbackElement:r.props.hydrateFallbackElement,HydrateFallback:r.props.HydrateFallback,errorElement:r.props.errorElement,ErrorBoundary:r.props.ErrorBoundary,hasErrorBoundary:r.props.hasErrorBoundary===!0||r.props.ErrorBoundary!=null||r.props.errorElement!=null,shouldRevalidate:r.props.shouldRevalidate,handle:r.props.handle,lazy:r.props.lazy};r.props.children&&(o.children=oF(r.props.children,s)),n.push(o)}),n}var $k="get",Vk="application/x-www-form-urlencoded";function YP(t){return typeof HTMLElement<"u"&&t instanceof HTMLElement}function Che(t){return YP(t)&&t.tagName.toLowerCase()==="button"}function Phe(t){return YP(t)&&t.tagName.toLowerCase()==="form"}function The(t){return YP(t)&&t.tagName.toLowerCase()==="input"}function Ahe(t){return!!(t.metaKey||t.altKey||t.ctrlKey||t.shiftKey)}function jhe(t,e){return t.button===0&&(!e||e==="_self")&&!Ahe(t)}function lF(t=""){return new URLSearchParams(typeof t=="string"||Array.isArray(t)||t instanceof URLSearchParams?t:Object.keys(t).reduce((e,n)=>{let r=t[n];return e.concat(Array.isArray(r)?r.map(i=>[n,i]):[[n,r]])},[]))}function Mhe(t,e){let n=lF(t);return e&&e.forEach((r,i)=>{n.has(i)||e.getAll(i).forEach(s=>{n.append(i,s)})}),n}var t1=null;function Ehe(){if(t1===null)try{new FormData(document.createElement("form"),0),t1=!1}catch{t1=!0}return t1}var Dhe=new Set(["application/x-www-form-urlencoded","multipart/form-data","text/plain"]);function LM(t){return t!=null&&!Dhe.has(t)?(oc(!1,`"${t}" is not a valid \`encType\` for \`<Form>\`/\`<fetcher.Form>\` and will default to "${Vk}"`),null):t}function Fhe(t,e){let n,r,i,s,o;if(Phe(t)){let l=t.getAttribute("action");r=l?bm(l,e):null,n=t.getAttribute("method")||$k,i=LM(t.getAttribute("enctype"))||Vk,s=new FormData(t)}else if(Che(t)||The(t)&&(t.type==="submit"||t.type==="image")){let l=t.form;if(l==null)throw new Error('Cannot submit a <button> or <input type="submit"> without a <form>');let c=t.getAttribute("formaction")||l.getAttribute("action");if(r=c?bm(c,e):null,n=t.getAttribute("formmethod")||l.getAttribute("method")||$k,i=LM(t.getAttribute("formenctype"))||LM(l.getAttribute("enctype"))||Vk,s=new FormData(l,t),!Ehe()){let{name:d,type:u,value:m}=t;if(u==="image"){let p=d?`${d}.`:"";s.append(`${p}x`,"0"),s.append(`${p}y`,"0")}else d&&s.append(d,m)}}else{if(YP(t))throw new Error('Cannot submit element that is not <form>, <button>, or <input type="submit|image">');n=$k,r=null,i=Vk,o=t}return s&&i==="text/plain"&&(o=s,s=void 0),{action:r,method:n.toLowerCase(),encType:i,formData:s,body:o}}Object.getOwnPropertyNames(Object.prototype).sort().join("\0");function II(t,e){if(t===!1||t===null||typeof t>"u")throw new Error(e)}function Rhe(t,e,n,r){let i=typeof t=="string"?new URL(t,typeof window>"u"?"server://singlefetch/":window.location.origin):t;return n?i.pathname.endsWith("/")?i.pathname=`${i.pathname}_.${r}`:i.pathname=`${i.pathname}.${r}`:i.pathname==="/"?i.pathname=`_root.${r}`:e&&bm(i.pathname,e)==="/"?i.pathname=`${e.replace(/\/$/,"")}/_root.${r}`:i.pathname=`${i.pathname.replace(/\/$/,"")}.${r}`,i}async function Lhe(t,e){if(t.id in e)return e[t.id];try{let n=await import(t.module);return e[t.id]=n,n}catch(n){return console.error(`Error loading route module \`${t.module}\`, reloading page...`),console.error(n),window.__reactRouterContext&&window.__reactRouterContext.isSpaMode,window.location.reload(),new Promise(()=>{})}}function Ihe(t){return t==null?!1:t.href==null?t.rel==="preload"&&typeof t.imageSrcSet=="string"&&typeof t.imageSizes=="string":typeof t.rel=="string"&&typeof t.href=="string"}async function Ohe(t,e,n){let r=await Promise.all(t.map(async i=>{let s=e.routes[i.route.id];if(s){let o=await Lhe(s,n);return o.links?o.links():[]}return[]}));return Hhe(r.flat(1).filter(Ihe).filter(i=>i.rel==="stylesheet"||i.rel==="preload").map(i=>i.rel==="stylesheet"?{...i,rel:"prefetch",as:"style"}:{...i,rel:"prefetch"}))}function EH(t,e,n,r,i,s){let o=(c,d)=>n[d]?c.route.id!==n[d].route.id:!0,l=(c,d)=>n[d].pathname!==c.pathname||n[d].route.path?.endsWith("*")&&n[d].params["*"]!==c.params["*"];return s==="assets"?e.filter((c,d)=>o(c,d)||l(c,d)):s==="data"?e.filter((c,d)=>{let u=r.routes[c.route.id];if(!u||!u.hasLoader)return!1;if(o(c,d)||l(c,d))return!0;if(c.route.shouldRevalidate){let m=c.route.shouldRevalidate({currentUrl:new URL(i.pathname+i.search+i.hash,window.origin),currentParams:n[0]?.params||{},nextUrl:new URL(t,window.origin),nextParams:c.params,defaultShouldRevalidate:!0});if(typeof m=="boolean")return m}return!0}):[]}function zhe(t,e,{includeHydrateFallback:n}={}){return Uhe(t.map(r=>{let i=e.routes[r.route.id];if(!i)return[];let s=[i.module];return i.clientActionModule&&(s=s.concat(i.clientActionModule)),i.clientLoaderModule&&(s=s.concat(i.clientLoaderModule)),n&&i.hydrateFallbackModule&&(s=s.concat(i.hydrateFallbackModule)),i.imports&&(s=s.concat(i.imports)),s}).flat(1))}function Uhe(t){return[...new Set(t)]}function Bhe(t){let e={},n=Object.keys(t).sort();for(let r of n)e[r]=t[r];return e}function Hhe(t,e){let n=new Set;return new Set(e),t.reduce((r,i)=>{let s=JSON.stringify(Bhe(i));return n.has(s)||(n.add(s),r.push({key:s,link:i})),r},[])}function LQ(){let t=w.useContext(ky);return II(t,"You must render this element inside a <DataRouterContext.Provider> element"),t}function qhe(){let t=w.useContext(XP);return II(t,"You must render this element inside a <DataRouterStateContext.Provider> element"),t}var OI=w.createContext(void 0);OI.displayName="FrameworkContext";function IQ(){let t=w.useContext(OI);return II(t,"You must render this element inside a <HydratedRouter> element"),t}function $he(t,e){let n=w.useContext(OI),[r,i]=w.useState(!1),[s,o]=w.useState(!1),{onFocus:l,onBlur:c,onMouseEnter:d,onMouseLeave:u,onTouchStart:m}=e,p=w.useRef(null);w.useEffect(()=>{if(t==="render"&&o(!0),t==="viewport"){let v=g=>{g.forEach(S=>{o(S.isIntersecting)})},b=new IntersectionObserver(v,{threshold:.5});return p.current&&b.observe(p.current),()=>{b.disconnect()}}},[t]),w.useEffect(()=>{if(r){let v=setTimeout(()=>{o(!0)},100);return()=>{clearTimeout(v)}}},[r]);let f=()=>{i(!0)},x=()=>{i(!1),o(!1)};return n?t!=="intent"?[s,p,{}]:[s,p,{onFocus:Rv(l,f),onBlur:Rv(c,x),onMouseEnter:Rv(d,f),onMouseLeave:Rv(u,x),onTouchStart:Rv(m,f)}]:[!1,p,{}]}function Rv(t,e){return n=>{t&&t(n),n.defaultPrevented||e(n)}}function Vhe({page:t,...e}){let{router:n}=LQ(),r=w.useMemo(()=>wQ(n.routes,t,n.basename),[n.routes,t,n.basename]);return r?w.createElement(Whe,{page:t,matches:r,...e}):null}function Ghe(t){let{manifest:e,routeModules:n}=IQ(),[r,i]=w.useState([]);return w.useEffect(()=>{let s=!1;return Ohe(t,e,n).then(o=>{s||i(o)}),()=>{s=!0}},[t,e,n]),r}function Whe({page:t,matches:e,...n}){let r=Qc(),{future:i,manifest:s,routeModules:o}=IQ(),{basename:l}=LQ(),{loaderData:c,matches:d}=qhe(),u=w.useMemo(()=>EH(t,e,d,s,r,"data"),[t,e,d,s,r]),m=w.useMemo(()=>EH(t,e,d,s,r,"assets"),[t,e,d,s,r]),p=w.useMemo(()=>{if(t===r.pathname+r.search+r.hash)return[];let v=new Set,b=!1;if(e.forEach(S=>{let N=s.routes[S.route.id];!N||!N.hasLoader||(!u.some(P=>P.route.id===S.route.id)&&S.route.id in c&&o[S.route.id]?.shouldRevalidate||N.hasClientLoader?b=!0:v.add(S.route.id))}),v.size===0)return[];let g=Rhe(t,l,i.unstable_trailingSlashAwareDataRequests,"data");return b&&v.size>0&&g.searchParams.set("_routes",e.filter(S=>v.has(S.route.id)).map(S=>S.route.id).join(",")),[g.pathname+g.search]},[l,i.unstable_trailingSlashAwareDataRequests,c,r,s,u,e,t,o]),f=w.useMemo(()=>zhe(m,s),[m,s]),x=Ghe(m);return w.createElement(w.Fragment,null,p.map(v=>w.createElement("link",{key:v,rel:"prefetch",as:"fetch",href:v,...n})),f.map(v=>w.createElement("link",{key:v,rel:"modulepreload",href:v,...n})),x.map(({key:v,link:b})=>w.createElement("link",{key:v,nonce:n.nonce,...b,crossOrigin:b.crossOrigin??n.crossOrigin})))}function Khe(...t){return e=>{t.forEach(n=>{typeof n=="function"?n(e):n!=null&&(n.current=e)})}}var Xhe=typeof window<"u"&&typeof window.document<"u"&&typeof window.document.createElement<"u";try{Xhe&&(window.__reactRouterVersion="7.13.0")}catch{}function Yhe({basename:t,children:e,unstable_useTransitions:n,window:r}){let i=w.useRef();i.current==null&&(i.current=Tme({window:r,v5Compat:!0}));let s=i.current,[o,l]=w.useState({action:s.action,location:s.location}),c=w.useCallback(d=>{n===!1?l(d):w.startTransition(()=>l(d))},[n]);return w.useLayoutEffect(()=>s.listen(c),[s,c]),w.createElement(khe,{basename:t,children:e,location:o.location,navigationType:o.action,navigator:s,unstable_useTransitions:n})}var OQ=/^(?:[a-z][a-z0-9+.-]*:|\/\/)/i,ws=w.forwardRef(function({onClick:e,discover:n="render",prefetch:r="none",relative:i,reloadDocument:s,replace:o,state:l,target:c,to:d,preventScrollReset:u,viewTransition:m,unstable_defaultShouldRevalidate:p,...f},x){let{basename:v,unstable_useTransitions:b}=w.useContext(xl),g=typeof d=="string"&&OQ.test(d),S=NQ(d,v);d=S.to;let N=lhe(d,{relative:i}),[P,C,A]=$he(r,f),T=Zhe(d,{replace:o,state:l,target:c,preventScrollReset:u,relative:i,viewTransition:m,unstable_defaultShouldRevalidate:p,unstable_useTransitions:b});function F(E){e&&e(E),E.defaultPrevented||T(E)}let k=w.createElement("a",{...f,...A,href:S.absoluteURL||N,onClick:S.isExternal||s?e:F,ref:Khe(x,C),target:c,"data-discover":!g&&n==="render"?"true":void 0});return P&&!g?w.createElement(w.Fragment,null,k,w.createElement(Vhe,{page:N})):k});ws.displayName="Link";var Px=w.forwardRef(function({"aria-current":e="page",caseSensitive:n=!1,className:r="",end:i=!1,style:s,to:o,viewTransition:l,children:c,...d},u){let m=nS(o,{relative:d.relative}),p=Qc(),f=w.useContext(XP),{navigator:x,basename:v}=w.useContext(xl),b=f!=null&&ape(m)&&l===!0,g=x.encodeLocation?x.encodeLocation(m).pathname:m.pathname,S=p.pathname,N=f&&f.navigation&&f.navigation.location?f.navigation.location.pathname:null;n||(S=S.toLowerCase(),N=N?N.toLowerCase():null,g=g.toLowerCase()),N&&v&&(N=bm(N,v)||N);const P=g!=="/"&&g.endsWith("/")?g.length-1:g.length;let C=S===g||!i&&S.startsWith(g)&&S.charAt(P)==="/",A=N!=null&&(N===g||!i&&N.startsWith(g)&&N.charAt(g.length)==="/"),T={isActive:C,isPending:A,isTransitioning:b},F=C?e:void 0,k;typeof r=="function"?k=r(T):k=[r,C?"active":null,A?"pending":null,b?"transitioning":null].filter(Boolean).join(" ");let E=typeof s=="function"?s(T):s;return w.createElement(ws,{...d,"aria-current":F,className:k,ref:u,style:E,to:o,viewTransition:l},typeof c=="function"?c(T):c)});Px.displayName="NavLink";var Qhe=w.forwardRef(({discover:t="render",fetcherKey:e,navigate:n,reloadDocument:r,replace:i,state:s,method:o=$k,action:l,onSubmit:c,relative:d,preventScrollReset:u,viewTransition:m,unstable_defaultShouldRevalidate:p,...f},x)=>{let{unstable_useTransitions:v}=w.useContext(xl),b=npe(),g=rpe(l,{relative:d}),S=o.toLowerCase()==="get"?"get":"post",N=typeof l=="string"&&OQ.test(l),P=C=>{if(c&&c(C),C.defaultPrevented)return;C.preventDefault();let A=C.nativeEvent.submitter,T=A?.getAttribute("formmethod")||o,F=()=>b(A||C.currentTarget,{fetcherKey:e,method:T,navigate:n,replace:i,state:s,relative:d,preventScrollReset:u,viewTransition:m,unstable_defaultShouldRevalidate:p});v&&n!==!1?w.startTransition(()=>F()):F()};return w.createElement("form",{ref:x,method:S,action:g,onSubmit:r?c:P,...f,"data-discover":!N&&t==="render"?"true":void 0})});Qhe.displayName="Form";function Jhe(t){return`${t} must be used within a data router.  See https://reactrouter.com/en/main/routers/picking-a-router.`}function zQ(t){let e=w.useContext(ky);return Ea(e,Jhe(t)),e}function Zhe(t,{target:e,replace:n,state:r,preventScrollReset:i,relative:s,viewTransition:o,unstable_defaultShouldRevalidate:l,unstable_useTransitions:c}={}){let d=as(),u=Qc(),m=nS(t,{relative:s});return w.useCallback(p=>{if(jhe(p,e)){p.preventDefault();let f=n!==void 0?n:sw(u)===sw(m),x=()=>d(t,{replace:f,state:r,preventScrollReset:i,relative:s,viewTransition:o,unstable_defaultShouldRevalidate:l});c?w.startTransition(()=>x()):x()}},[u,d,m,n,r,e,t,i,s,o,l,c])}function rS(t){oc(typeof URLSearchParams<"u","You cannot use the `useSearchParams` hook in a browser that does not support the URLSearchParams API. If you need to support Internet Explorer 11, we recommend you load a polyfill such as https://github.com/ungap/url-search-params.");let e=w.useRef(lF(t)),n=w.useRef(!1),r=Qc(),i=w.useMemo(()=>Mhe(r.search,n.current?null:e.current),[r.search]),s=as(),o=w.useCallback((l,c)=>{const d=lF(typeof l=="function"?l(new URLSearchParams(i)):l);n.current=!0,s("?"+d,c)},[s,i]);return[i,o]}var epe=0,tpe=()=>`__${String(++epe)}__`;function npe(){let{router:t}=zQ("useSubmit"),{basename:e}=w.useContext(xl),n=vhe(),r=t.fetch,i=t.navigate;return w.useCallback(async(s,o={})=>{let{action:l,method:c,encType:d,formData:u,body:m}=Fhe(s,e);if(o.navigate===!1){let p=o.fetcherKey||tpe();await r(p,n,o.action||l,{unstable_defaultShouldRevalidate:o.unstable_defaultShouldRevalidate,preventScrollReset:o.preventScrollReset,formData:u,body:m,formMethod:o.method||c,formEncType:o.encType||d,flushSync:o.flushSync})}else await i(o.action||l,{unstable_defaultShouldRevalidate:o.unstable_defaultShouldRevalidate,preventScrollReset:o.preventScrollReset,formData:u,body:m,formMethod:o.method||c,formEncType:o.encType||d,replace:o.replace,state:o.state,fromRouteId:n,flushSync:o.flushSync,viewTransition:o.viewTransition})},[r,i,e,n])}function rpe(t,{relative:e}={}){let{basename:n}=w.useContext(xl),r=w.useContext(bc);Ea(r,"useFormAction must be used inside a RouteContext");let[i]=r.matches.slice(-1),s={...nS(t||".",{relative:e})},o=Qc();if(t==null){s.search=o.search;let l=new URLSearchParams(s.search),c=l.getAll("index");if(c.some(u=>u==="")){l.delete("index"),c.filter(m=>m).forEach(m=>l.append("index",m));let u=l.toString();s.search=u?`?${u}`:""}}return(!t||t===".")&&i.route.index&&(s.search=s.search?s.search.replace(/^\?/,"?index&"):"?index"),n!=="/"&&(s.pathname=s.pathname==="/"?n:om([n,s.pathname])),sw(s)}function ape(t,{relative:e}={}){let n=w.useContext(PQ);Ea(n!=null,"`useViewTransitionState` must be used within `react-router-dom`'s `RouterProvider`.  Did you accidentally import `RouterProvider` from `react-router`?");let{basename:r}=zQ("useViewTransitionState"),i=nS(t,{relative:e});if(!n.isTransitioning)return!1;let s=bm(n.currentLocation.pathname,r)||n.currentLocation.pathname,o=bm(n.nextLocation.pathname,r)||n.nextLocation.pathname;return SN(i.pathname,o)!=null||SN(i.pathname,s)!=null}var Qu=dQ();const ipe=gc(Qu);var Hg=class{constructor(){this.listeners=new Set,this.subscribe=this.subscribe.bind(this)}subscribe(t){return this.listeners.add(t),this.onSubscribe(),()=>{this.listeners.delete(t),this.onUnsubscribe()}}hasListeners(){return this.listeners.size>0}onSubscribe(){}onUnsubscribe(){}},spe={setTimeout:(t,e)=>setTimeout(t,e),clearTimeout:t=>clearTimeout(t),setInterval:(t,e)=>setInterval(t,e),clearInterval:t=>clearInterval(t)},ope=class{#t=spe;#e=!1;setTimeoutProvider(t){this.#t=t}setTimeout(t,e){return this.#t.setTimeout(t,e)}clearTimeout(t){this.#t.clearTimeout(t)}setInterval(t,e){return this.#t.setInterval(t,e)}clearInterval(t){this.#t.clearInterval(t)}},zf=new ope;function lpe(t){setTimeout(t,0)}var mg=typeof window>"u"||"Deno"in globalThis;function Bs(){}function cpe(t,e){return typeof t=="function"?t(e):t}function cF(t){return typeof t=="number"&&t>=0&&t!==1/0}function UQ(t,e){return Math.max(t+(e||0)-Date.now(),0)}function rp(t,e){return typeof t=="function"?t(e):t}function $l(t,e){return typeof t=="function"?t(e):t}function DH(t,e){const{type:n="all",exact:r,fetchStatus:i,predicate:s,queryKey:o,stale:l}=t;if(o){if(r){if(e.queryHash!==zI(o,e.options))return!1}else if(!ow(e.queryKey,o))return!1}if(n!=="all"){const c=e.isActive();if(n==="active"&&!c||n==="inactive"&&c)return!1}return!(typeof l=="boolean"&&e.isStale()!==l||i&&i!==e.state.fetchStatus||s&&!s(e))}function FH(t,e){const{exact:n,status:r,predicate:i,mutationKey:s}=t;if(s){if(!e.options.mutationKey)return!1;if(n){if(hg(e.options.mutationKey)!==hg(s))return!1}else if(!ow(e.options.mutationKey,s))return!1}return!(r&&e.state.status!==r||i&&!i(e))}function zI(t,e){return(e?.queryKeyHashFn||hg)(t)}function hg(t){return JSON.stringify(t,(e,n)=>dF(n)?Object.keys(n).sort().reduce((r,i)=>(r[i]=n[i],r),{}):n)}function ow(t,e){return t===e?!0:typeof t!=typeof e?!1:t&&e&&typeof t=="object"&&typeof e=="object"?Object.keys(e).every(n=>ow(t[n],e[n])):!1}var dpe=Object.prototype.hasOwnProperty;function UI(t,e,n=0){if(t===e)return t;if(n>500)return e;const r=RH(t)&&RH(e);if(!r&&!(dF(t)&&dF(e)))return e;const s=(r?t:Object.keys(t)).length,o=r?e:Object.keys(e),l=o.length,c=r?new Array(l):{};let d=0;for(let u=0;u<l;u++){const m=r?u:o[u],p=t[m],f=e[m];if(p===f){c[m]=p,(r?u<s:dpe.call(t,m))&&d++;continue}if(p===null||f===null||typeof p!="object"||typeof f!="object"){c[m]=f;continue}const x=UI(p,f,n+1);c[m]=x,x===p&&d++}return s===l&&d===s?t:c}function lw(t,e){if(!e||Object.keys(t).length!==Object.keys(e).length)return!1;for(const n in t)if(t[n]!==e[n])return!1;return!0}function RH(t){return Array.isArray(t)&&t.length===Object.keys(t).length}function dF(t){if(!LH(t))return!1;const e=t.constructor;if(e===void 0)return!0;const n=e.prototype;return!(!LH(n)||!n.hasOwnProperty("isPrototypeOf")||Object.getPrototypeOf(t)!==Object.prototype)}function LH(t){return Object.prototype.toString.call(t)==="[object Object]"}function upe(t){return new Promise(e=>{zf.setTimeout(e,t)})}function uF(t,e,n){return typeof n.structuralSharing=="function"?n.structuralSharing(t,e):n.structuralSharing!==!1?UI(t,e):e}function mpe(t,e,n=0){const r=[...t,e];return n&&r.length>n?r.slice(1):r}function hpe(t,e,n=0){const r=[e,...t];return n&&r.length>n?r.slice(0,-1):r}var BI=Symbol();function BQ(t,e){return!t.queryFn&&e?.initialPromise?()=>e.initialPromise:!t.queryFn||t.queryFn===BI?()=>Promise.reject(new Error(`Missing queryFn: '${t.queryHash}'`)):t.queryFn}function HI(t,e){return typeof t=="function"?t(...e):!!t}function ppe(t,e,n){let r=!1,i;return Object.defineProperty(t,"signal",{enumerable:!0,get:()=>(i??=e(),r||(r=!0,i.aborted?n():i.addEventListener("abort",n,{once:!0})),i)}),t}var fpe=class extends Hg{#t;#e;#n;constructor(){super(),this.#n=t=>{if(!mg&&window.addEventListener){const e=()=>t();return window.addEventListener("visibilitychange",e,!1),()=>{window.removeEventListener("visibilitychange",e)}}}}onSubscribe(){this.#e||this.setEventListener(this.#n)}onUnsubscribe(){this.hasListeners()||(this.#e?.(),this.#e=void 0)}setEventListener(t){this.#n=t,this.#e?.(),this.#e=t(e=>{typeof e=="boolean"?this.setFocused(e):this.onFocus()})}setFocused(t){this.#t!==t&&(this.#t=t,this.onFocus())}onFocus(){const t=this.isFocused();this.listeners.forEach(e=>{e(t)})}isFocused(){return typeof this.#t=="boolean"?this.#t:globalThis.document?.visibilityState!=="hidden"}},qI=new fpe;function mF(){let t,e;const n=new Promise((i,s)=>{t=i,e=s});n.status="pending",n.catch(()=>{});function r(i){Object.assign(n,i),delete n.resolve,delete n.reject}return n.resolve=i=>{r({status:"fulfilled",value:i}),t(i)},n.reject=i=>{r({status:"rejected",reason:i}),e(i)},n}var gpe=lpe;function bpe(){let t=[],e=0,n=l=>{l()},r=l=>{l()},i=gpe;const s=l=>{e?t.push(l):i(()=>{n(l)})},o=()=>{const l=t;t=[],l.length&&i(()=>{r(()=>{l.forEach(c=>{n(c)})})})};return{batch:l=>{let c;e++;try{c=l()}finally{e--,e||o()}return c},batchCalls:l=>(...c)=>{s(()=>{l(...c)})},schedule:s,setNotifyFunction:l=>{n=l},setBatchNotifyFunction:l=>{r=l},setScheduler:l=>{i=l}}}var Qa=bpe(),xpe=class extends Hg{#t=!0;#e;#n;constructor(){super(),this.#n=t=>{if(!mg&&window.addEventListener){const e=()=>t(!0),n=()=>t(!1);return window.addEventListener("online",e,!1),window.addEventListener("offline",n,!1),()=>{window.removeEventListener("online",e),window.removeEventListener("offline",n)}}}}onSubscribe(){this.#e||this.setEventListener(this.#n)}onUnsubscribe(){this.hasListeners()||(this.#e?.(),this.#e=void 0)}setEventListener(t){this.#n=t,this.#e?.(),this.#e=t(this.setOnline.bind(this))}setOnline(t){this.#t!==t&&(this.#t=t,this.listeners.forEach(n=>{n(t)}))}isOnline(){return this.#t}},_N=new xpe;function ype(t){return Math.min(1e3*2**t,3e4)}function HQ(t){return(t??"online")==="online"?_N.isOnline():!0}var hF=class extends Error{constructor(t){super("CancelledError"),this.revert=t?.revert,this.silent=t?.silent}};function qQ(t){let e=!1,n=0,r;const i=mF(),s=()=>i.status!=="pending",o=v=>{if(!s()){const b=new hF(v);p(b),t.onCancel?.(b)}},l=()=>{e=!0},c=()=>{e=!1},d=()=>qI.isFocused()&&(t.networkMode==="always"||_N.isOnline())&&t.canRun(),u=()=>HQ(t.networkMode)&&t.canRun(),m=v=>{s()||(r?.(),i.resolve(v))},p=v=>{s()||(r?.(),i.reject(v))},f=()=>new Promise(v=>{r=b=>{(s()||d())&&v(b)},t.onPause?.()}).then(()=>{r=void 0,s()||t.onContinue?.()}),x=()=>{if(s())return;let v;const b=n===0?t.initialPromise:void 0;try{v=b??t.fn()}catch(g){v=Promise.reject(g)}Promise.resolve(v).then(m).catch(g=>{if(s())return;const S=t.retry??(mg?0:3),N=t.retryDelay??ype,P=typeof N=="function"?N(n,g):N,C=S===!0||typeof S=="number"&&n<S||typeof S=="function"&&S(n,g);if(e||!C){p(g);return}n++,t.onFail?.(n,g),upe(P).then(()=>d()?void 0:f()).then(()=>{e?p(g):x()})})};return{promise:i,status:()=>i.status,cancel:o,continue:()=>(r?.(),i),cancelRetry:l,continueRetry:c,canStart:u,start:()=>(u()?x():f().then(x),i)}}var $Q=class{#t;destroy(){this.clearGcTimeout()}scheduleGc(){this.clearGcTimeout(),cF(this.gcTime)&&(this.#t=zf.setTimeout(()=>{this.optionalRemove()},this.gcTime))}updateGcTime(t){this.gcTime=Math.max(this.gcTime||0,t??(mg?1/0:300*1e3))}clearGcTimeout(){this.#t&&(zf.clearTimeout(this.#t),this.#t=void 0)}},vpe=class extends $Q{#t;#e;#n;#a;#r;#i;#o;constructor(t){super(),this.#o=!1,this.#i=t.defaultOptions,this.setOptions(t.options),this.observers=[],this.#a=t.client,this.#n=this.#a.getQueryCache(),this.queryKey=t.queryKey,this.queryHash=t.queryHash,this.#t=OH(this.options),this.state=t.state??this.#t,this.scheduleGc()}get meta(){return this.options.meta}get promise(){return this.#r?.promise}setOptions(t){if(this.options={...this.#i,...t},this.updateGcTime(this.options.gcTime),this.state&&this.state.data===void 0){const e=OH(this.options);e.data!==void 0&&(this.setState(IH(e.data,e.dataUpdatedAt)),this.#t=e)}}optionalRemove(){!this.observers.length&&this.state.fetchStatus==="idle"&&this.#n.remove(this)}setData(t,e){const n=uF(this.state.data,t,this.options);return this.#s({data:n,type:"success",dataUpdatedAt:e?.updatedAt,manual:e?.manual}),n}setState(t,e){this.#s({type:"setState",state:t,setStateOptions:e})}cancel(t){const e=this.#r?.promise;return this.#r?.cancel(t),e?e.then(Bs).catch(Bs):Promise.resolve()}destroy(){super.destroy(),this.cancel({silent:!0})}reset(){this.destroy(),this.setState(this.#t)}isActive(){return this.observers.some(t=>$l(t.options.enabled,this)!==!1)}isDisabled(){return this.getObserversCount()>0?!this.isActive():this.options.queryFn===BI||this.state.dataUpdateCount+this.state.errorUpdateCount===0}isStatic(){return this.getObserversCount()>0?this.observers.some(t=>rp(t.options.staleTime,this)==="static"):!1}isStale(){return this.getObserversCount()>0?this.observers.some(t=>t.getCurrentResult().isStale):this.state.data===void 0||this.state.isInvalidated}isStaleByTime(t=0){return this.state.data===void 0?!0:t==="static"?!1:this.state.isInvalidated?!0:!UQ(this.state.dataUpdatedAt,t)}onFocus(){this.observers.find(e=>e.shouldFetchOnWindowFocus())?.refetch({cancelRefetch:!1}),this.#r?.continue()}onOnline(){this.observers.find(e=>e.shouldFetchOnReconnect())?.refetch({cancelRefetch:!1}),this.#r?.continue()}addObserver(t){this.observers.includes(t)||(this.observers.push(t),this.clearGcTimeout(),this.#n.notify({type:"observerAdded",query:this,observer:t}))}removeObserver(t){this.observers.includes(t)&&(this.observers=this.observers.filter(e=>e!==t),this.observers.length||(this.#r&&(this.#o?this.#r.cancel({revert:!0}):this.#r.cancelRetry()),this.scheduleGc()),this.#n.notify({type:"observerRemoved",query:this,observer:t}))}getObserversCount(){return this.observers.length}invalidate(){this.state.isInvalidated||this.#s({type:"invalidate"})}async fetch(t,e){if(this.state.fetchStatus!=="idle"&&this.#r?.status()!=="rejected"){if(this.state.data!==void 0&&e?.cancelRefetch)this.cancel({silent:!0});else if(this.#r)return this.#r.continueRetry(),this.#r.promise}if(t&&this.setOptions(t),!this.options.queryFn){const l=this.observers.find(c=>c.options.queryFn);l&&this.setOptions(l.options)}const n=new AbortController,r=l=>{Object.defineProperty(l,"signal",{enumerable:!0,get:()=>(this.#o=!0,n.signal)})},i=()=>{const l=BQ(this.options,e),d=(()=>{const u={client:this.#a,queryKey:this.queryKey,meta:this.meta};return r(u),u})();return this.#o=!1,this.options.persister?this.options.persister(l,d,this):l(d)},o=(()=>{const l={fetchOptions:e,options:this.options,queryKey:this.queryKey,client:this.#a,state:this.state,fetchFn:i};return r(l),l})();this.options.behavior?.onFetch(o,this),this.#e=this.state,(this.state.fetchStatus==="idle"||this.state.fetchMeta!==o.fetchOptions?.meta)&&this.#s({type:"fetch",meta:o.fetchOptions?.meta}),this.#r=qQ({initialPromise:e?.initialPromise,fn:o.fetchFn,onCancel:l=>{l instanceof hF&&l.revert&&this.setState({...this.#e,fetchStatus:"idle"}),n.abort()},onFail:(l,c)=>{this.#s({type:"failed",failureCount:l,error:c})},onPause:()=>{this.#s({type:"pause"})},onContinue:()=>{this.#s({type:"continue"})},retry:o.options.retry,retryDelay:o.options.retryDelay,networkMode:o.options.networkMode,canRun:()=>!0});try{const l=await this.#r.start();if(l===void 0)throw new Error(`${this.queryHash} data is undefined`);return this.setData(l),this.#n.config.onSuccess?.(l,this),this.#n.config.onSettled?.(l,this.state.error,this),l}catch(l){if(l instanceof hF){if(l.silent)return this.#r.promise;if(l.revert){if(this.state.data===void 0)throw l;return this.state.data}}throw this.#s({type:"error",error:l}),this.#n.config.onError?.(l,this),this.#n.config.onSettled?.(this.state.data,l,this),l}finally{this.scheduleGc()}}#s(t){const e=n=>{switch(t.type){case"failed":return{...n,fetchFailureCount:t.failureCount,fetchFailureReason:t.error};case"pause":return{...n,fetchStatus:"paused"};case"continue":return{...n,fetchStatus:"fetching"};case"fetch":return{...n,...VQ(n.data,this.options),fetchMeta:t.meta??null};case"success":const r={...n,...IH(t.data,t.dataUpdatedAt),dataUpdateCount:n.dataUpdateCount+1,...!t.manual&&{fetchStatus:"idle",fetchFailureCount:0,fetchFailureReason:null}};return this.#e=t.manual?r:void 0,r;case"error":const i=t.error;return{...n,error:i,errorUpdateCount:n.errorUpdateCount+1,errorUpdatedAt:Date.now(),fetchFailureCount:n.fetchFailureCount+1,fetchFailureReason:i,fetchStatus:"idle",status:"error",isInvalidated:!0};case"invalidate":return{...n,isInvalidated:!0};case"setState":return{...n,...t.state}}};this.state=e(this.state),Qa.batch(()=>{this.observers.forEach(n=>{n.onQueryUpdate()}),this.#n.notify({query:this,type:"updated",action:t})})}};function VQ(t,e){return{fetchFailureCount:0,fetchFailureReason:null,fetchStatus:HQ(e.networkMode)?"fetching":"paused",...t===void 0&&{error:null,status:"pending"}}}function IH(t,e){return{data:t,dataUpdatedAt:e??Date.now(),error:null,isInvalidated:!1,status:"success"}}function OH(t){const e=typeof t.initialData=="function"?t.initialData():t.initialData,n=e!==void 0,r=n?typeof t.initialDataUpdatedAt=="function"?t.initialDataUpdatedAt():t.initialDataUpdatedAt:0;return{data:e,dataUpdateCount:0,dataUpdatedAt:n?r??Date.now():0,error:null,errorUpdateCount:0,errorUpdatedAt:0,fetchFailureCount:0,fetchFailureReason:null,fetchMeta:null,isInvalidated:!1,status:n?"success":"pending",fetchStatus:"idle"}}var $I=class extends Hg{constructor(t,e){super(),this.options=e,this.#t=t,this.#s=null,this.#o=mF(),this.bindMethods(),this.setOptions(e)}#t;#e=void 0;#n=void 0;#a=void 0;#r;#i;#o;#s;#p;#u;#m;#c;#d;#l;#h=new Set;bindMethods(){this.refetch=this.refetch.bind(this)}onSubscribe(){this.listeners.size===1&&(this.#e.addObserver(this),zH(this.#e,this.options)?this.#f():this.updateResult(),this.#y())}onUnsubscribe(){this.hasListeners()||this.destroy()}shouldFetchOnReconnect(){return pF(this.#e,this.options,this.options.refetchOnReconnect)}shouldFetchOnWindowFocus(){return pF(this.#e,this.options,this.options.refetchOnWindowFocus)}destroy(){this.listeners=new Set,this.#v(),this.#w(),this.#e.removeObserver(this)}setOptions(t){const e=this.options,n=this.#e;if(this.options=this.#t.defaultQueryOptions(t),this.options.enabled!==void 0&&typeof this.options.enabled!="boolean"&&typeof this.options.enabled!="function"&&typeof $l(this.options.enabled,this.#e)!="boolean")throw new Error("Expected enabled to be a boolean or a callback that returns a boolean");this.#S(),this.#e.setOptions(this.options),e._defaulted&&!lw(this.options,e)&&this.#t.getQueryCache().notify({type:"observerOptionsUpdated",query:this.#e,observer:this});const r=this.hasListeners();r&&UH(this.#e,n,this.options,e)&&this.#f(),this.updateResult(),r&&(this.#e!==n||$l(this.options.enabled,this.#e)!==$l(e.enabled,this.#e)||rp(this.options.staleTime,this.#e)!==rp(e.staleTime,this.#e))&&this.#g();const i=this.#b();r&&(this.#e!==n||$l(this.options.enabled,this.#e)!==$l(e.enabled,this.#e)||i!==this.#l)&&this.#x(i)}getOptimisticResult(t){const e=this.#t.getQueryCache().build(this.#t,t),n=this.createResult(e,t);return Spe(this,n)&&(this.#a=n,this.#i=this.options,this.#r=this.#e.state),n}getCurrentResult(){return this.#a}trackResult(t,e){return new Proxy(t,{get:(n,r)=>(this.trackProp(r),e?.(r),r==="promise"&&(this.trackProp("data"),!this.options.experimental_prefetchInRender&&this.#o.status==="pending"&&this.#o.reject(new Error("experimental_prefetchInRender feature flag is not enabled"))),Reflect.get(n,r))})}trackProp(t){this.#h.add(t)}getCurrentQuery(){return this.#e}refetch({...t}={}){return this.fetch({...t})}fetchOptimistic(t){const e=this.#t.defaultQueryOptions(t),n=this.#t.getQueryCache().build(this.#t,e);return n.fetch().then(()=>this.createResult(n,e))}fetch(t){return this.#f({...t,cancelRefetch:t.cancelRefetch??!0}).then(()=>(this.updateResult(),this.#a))}#f(t){this.#S();let e=this.#e.fetch(this.options,t);return t?.throwOnError||(e=e.catch(Bs)),e}#g(){this.#v();const t=rp(this.options.staleTime,this.#e);if(mg||this.#a.isStale||!cF(t))return;const n=UQ(this.#a.dataUpdatedAt,t)+1;this.#c=zf.setTimeout(()=>{this.#a.isStale||this.updateResult()},n)}#b(){return(typeof this.options.refetchInterval=="function"?this.options.refetchInterval(this.#e):this.options.refetchInterval)??!1}#x(t){this.#w(),this.#l=t,!(mg||$l(this.options.enabled,this.#e)===!1||!cF(this.#l)||this.#l===0)&&(this.#d=zf.setInterval(()=>{(this.options.refetchIntervalInBackground||qI.isFocused())&&this.#f()},this.#l))}#y(){this.#g(),this.#x(this.#b())}#v(){this.#c&&(zf.clearTimeout(this.#c),this.#c=void 0)}#w(){this.#d&&(zf.clearInterval(this.#d),this.#d=void 0)}createResult(t,e){const n=this.#e,r=this.options,i=this.#a,s=this.#r,o=this.#i,c=t!==n?t.state:this.#n,{state:d}=t;let u={...d},m=!1,p;if(e._optimisticResults){const F=this.hasListeners(),k=!F&&zH(t,e),E=F&&UH(t,n,e,r);(k||E)&&(u={...u,...VQ(d.data,t.options)}),e._optimisticResults==="isRestoring"&&(u.fetchStatus="idle")}let{error:f,errorUpdatedAt:x,status:v}=u;p=u.data;let b=!1;if(e.placeholderData!==void 0&&p===void 0&&v==="pending"){let F;i?.isPlaceholderData&&e.placeholderData===o?.placeholderData?(F=i.data,b=!0):F=typeof e.placeholderData=="function"?e.placeholderData(this.#m?.state.data,this.#m):e.placeholderData,F!==void 0&&(v="success",p=uF(i?.data,F,e),m=!0)}if(e.select&&p!==void 0&&!b)if(i&&p===s?.data&&e.select===this.#p)p=this.#u;else try{this.#p=e.select,p=e.select(p),p=uF(i?.data,p,e),this.#u=p,this.#s=null}catch(F){this.#s=F}this.#s&&(f=this.#s,p=this.#u,x=Date.now(),v="error");const g=u.fetchStatus==="fetching",S=v==="pending",N=v==="error",P=S&&g,C=p!==void 0,T={status:v,fetchStatus:u.fetchStatus,isPending:S,isSuccess:v==="success",isError:N,isInitialLoading:P,isLoading:P,data:p,dataUpdatedAt:u.dataUpdatedAt,error:f,errorUpdatedAt:x,failureCount:u.fetchFailureCount,failureReason:u.fetchFailureReason,errorUpdateCount:u.errorUpdateCount,isFetched:u.dataUpdateCount>0||u.errorUpdateCount>0,isFetchedAfterMount:u.dataUpdateCount>c.dataUpdateCount||u.errorUpdateCount>c.errorUpdateCount,isFetching:g,isRefetching:g&&!S,isLoadingError:N&&!C,isPaused:u.fetchStatus==="paused",isPlaceholderData:m,isRefetchError:N&&C,isStale:VI(t,e),refetch:this.refetch,promise:this.#o,isEnabled:$l(e.enabled,t)!==!1};if(this.options.experimental_prefetchInRender){const F=T.data!==void 0,k=T.status==="error"&&!F,E=X=>{k?X.reject(T.error):F&&X.resolve(T.data)},$=()=>{const X=this.#o=T.promise=mF();E(X)},z=this.#o;switch(z.status){case"pending":t.queryHash===n.queryHash&&E(z);break;case"fulfilled":(k||T.data!==z.value)&&$();break;case"rejected":(!k||T.error!==z.reason)&&$();break}}return T}updateResult(){const t=this.#a,e=this.createResult(this.#e,this.options);if(this.#r=this.#e.state,this.#i=this.options,this.#r.data!==void 0&&(this.#m=this.#e),lw(e,t))return;this.#a=e;const n=()=>{if(!t)return!0;const{notifyOnChangeProps:r}=this.options,i=typeof r=="function"?r():r;if(i==="all"||!i&&!this.#h.size)return!0;const s=new Set(i??this.#h);return this.options.throwOnError&&s.add("error"),Object.keys(this.#a).some(o=>{const l=o;return this.#a[l]!==t[l]&&s.has(l)})};this.#_({listeners:n()})}#S(){const t=this.#t.getQueryCache().build(this.#t,this.options);if(t===this.#e)return;const e=this.#e;this.#e=t,this.#n=t.state,this.hasListeners()&&(e?.removeObserver(this),t.addObserver(this))}onQueryUpdate(){this.updateResult(),this.hasListeners()&&this.#y()}#_(t){Qa.batch(()=>{t.listeners&&this.listeners.forEach(e=>{e(this.#a)}),this.#t.getQueryCache().notify({query:this.#e,type:"observerResultsUpdated"})})}};function wpe(t,e){return $l(e.enabled,t)!==!1&&t.state.data===void 0&&!(t.state.status==="error"&&e.retryOnMount===!1)}function zH(t,e){return wpe(t,e)||t.state.data!==void 0&&pF(t,e,e.refetchOnMount)}function pF(t,e,n){if($l(e.enabled,t)!==!1&&rp(e.staleTime,t)!=="static"){const r=typeof n=="function"?n(t):n;return r==="always"||r!==!1&&VI(t,e)}return!1}function UH(t,e,n,r){return(t!==e||$l(r.enabled,t)===!1)&&(!n.suspense||t.state.status!=="error")&&VI(t,n)}function VI(t,e){return $l(e.enabled,t)!==!1&&t.isStaleByTime(rp(e.staleTime,t))}function Spe(t,e){return!lw(t.getCurrentResult(),e)}function BH(t){return{onFetch:(e,n)=>{const r=e.options,i=e.fetchOptions?.meta?.fetchMore?.direction,s=e.state.data?.pages||[],o=e.state.data?.pageParams||[];let l={pages:[],pageParams:[]},c=0;const d=async()=>{let u=!1;const m=x=>{ppe(x,()=>e.signal,()=>u=!0)},p=BQ(e.options,e.fetchOptions),f=async(x,v,b)=>{if(u)return Promise.reject();if(v==null&&x.pages.length)return Promise.resolve(x);const S=(()=>{const A={client:e.client,queryKey:e.queryKey,pageParam:v,direction:b?"backward":"forward",meta:e.options.meta};return m(A),A})(),N=await p(S),{maxPages:P}=e.options,C=b?hpe:mpe;return{pages:C(x.pages,N,P),pageParams:C(x.pageParams,v,P)}};if(i&&s.length){const x=i==="backward",v=x?_pe:HH,b={pages:s,pageParams:o},g=v(r,b);l=await f(b,g,x)}else{const x=t??s.length;do{const v=c===0?o[0]??r.initialPageParam:HH(r,l);if(c>0&&v==null)break;l=await f(l,v),c++}while(c<x)}return l};e.options.persister?e.fetchFn=()=>e.options.persister?.(d,{client:e.client,queryKey:e.queryKey,meta:e.options.meta,signal:e.signal},n):e.fetchFn=d}}}function HH(t,{pages:e,pageParams:n}){const r=e.length-1;return e.length>0?t.getNextPageParam(e[r],e,n[r],n):void 0}function _pe(t,{pages:e,pageParams:n}){return e.length>0?t.getPreviousPageParam?.(e[0],e,n[0],n):void 0}var kpe=class extends $Q{#t;#e;#n;#a;constructor(t){super(),this.#t=t.client,this.mutationId=t.mutationId,this.#n=t.mutationCache,this.#e=[],this.state=t.state||GQ(),this.setOptions(t.options),this.scheduleGc()}setOptions(t){this.options=t,this.updateGcTime(this.options.gcTime)}get meta(){return this.options.meta}addObserver(t){this.#e.includes(t)||(this.#e.push(t),this.clearGcTimeout(),this.#n.notify({type:"observerAdded",mutation:this,observer:t}))}removeObserver(t){this.#e=this.#e.filter(e=>e!==t),this.scheduleGc(),this.#n.notify({type:"observerRemoved",mutation:this,observer:t})}optionalRemove(){this.#e.length||(this.state.status==="pending"?this.scheduleGc():this.#n.remove(this))}continue(){return this.#a?.continue()??this.execute(this.state.variables)}async execute(t){const e=()=>{this.#r({type:"continue"})},n={client:this.#t,meta:this.options.meta,mutationKey:this.options.mutationKey};this.#a=qQ({fn:()=>this.options.mutationFn?this.options.mutationFn(t,n):Promise.reject(new Error("No mutationFn found")),onFail:(s,o)=>{this.#r({type:"failed",failureCount:s,error:o})},onPause:()=>{this.#r({type:"pause"})},onContinue:e,retry:this.options.retry??0,retryDelay:this.options.retryDelay,networkMode:this.options.networkMode,canRun:()=>this.#n.canRun(this)});const r=this.state.status==="pending",i=!this.#a.canStart();try{if(r)e();else{this.#r({type:"pending",variables:t,isPaused:i}),this.#n.config.onMutate&&await this.#n.config.onMutate(t,this,n);const o=await this.options.onMutate?.(t,n);o!==this.state.context&&this.#r({type:"pending",context:o,variables:t,isPaused:i})}const s=await this.#a.start();return await this.#n.config.onSuccess?.(s,t,this.state.context,this,n),await this.options.onSuccess?.(s,t,this.state.context,n),await this.#n.config.onSettled?.(s,null,this.state.variables,this.state.context,this,n),await this.options.onSettled?.(s,null,t,this.state.context,n),this.#r({type:"success",data:s}),s}catch(s){try{await this.#n.config.onError?.(s,t,this.state.context,this,n)}catch(o){Promise.reject(o)}try{await this.options.onError?.(s,t,this.state.context,n)}catch(o){Promise.reject(o)}try{await this.#n.config.onSettled?.(void 0,s,this.state.variables,this.state.context,this,n)}catch(o){Promise.reject(o)}try{await this.options.onSettled?.(void 0,s,t,this.state.context,n)}catch(o){Promise.reject(o)}throw this.#r({type:"error",error:s}),s}finally{this.#n.runNext(this)}}#r(t){const e=n=>{switch(t.type){case"failed":return{...n,failureCount:t.failureCount,failureReason:t.error};case"pause":return{...n,isPaused:!0};case"continue":return{...n,isPaused:!1};case"pending":return{...n,context:t.context,data:void 0,failureCount:0,failureReason:null,error:null,isPaused:t.isPaused,status:"pending",variables:t.variables,submittedAt:Date.now()};case"success":return{...n,data:t.data,failureCount:0,failureReason:null,error:null,status:"success",isPaused:!1};case"error":return{...n,data:void 0,error:t.error,failureCount:n.failureCount+1,failureReason:t.error,isPaused:!1,status:"error"}}};this.state=e(this.state),Qa.batch(()=>{this.#e.forEach(n=>{n.onMutationUpdate(t)}),this.#n.notify({mutation:this,type:"updated",action:t})})}};function GQ(){return{context:void 0,data:void 0,error:null,failureCount:0,failureReason:null,isPaused:!1,status:"idle",variables:void 0,submittedAt:0}}var Npe=class extends Hg{constructor(t={}){super(),this.config=t,this.#t=new Set,this.#e=new Map,this.#n=0}#t;#e;#n;build(t,e,n){const r=new kpe({client:t,mutationCache:this,mutationId:++this.#n,options:t.defaultMutationOptions(e),state:n});return this.add(r),r}add(t){this.#t.add(t);const e=n1(t);if(typeof e=="string"){const n=this.#e.get(e);n?n.push(t):this.#e.set(e,[t])}this.notify({type:"added",mutation:t})}remove(t){if(this.#t.delete(t)){const e=n1(t);if(typeof e=="string"){const n=this.#e.get(e);if(n)if(n.length>1){const r=n.indexOf(t);r!==-1&&n.splice(r,1)}else n[0]===t&&this.#e.delete(e)}}this.notify({type:"removed",mutation:t})}canRun(t){const e=n1(t);if(typeof e=="string"){const r=this.#e.get(e)?.find(i=>i.state.status==="pending");return!r||r===t}else return!0}runNext(t){const e=n1(t);return typeof e=="string"?this.#e.get(e)?.find(r=>r!==t&&r.state.isPaused)?.continue()??Promise.resolve():Promise.resolve()}clear(){Qa.batch(()=>{this.#t.forEach(t=>{this.notify({type:"removed",mutation:t})}),this.#t.clear(),this.#e.clear()})}getAll(){return Array.from(this.#t)}find(t){const e={exact:!0,...t};return this.getAll().find(n=>FH(e,n))}findAll(t={}){return this.getAll().filter(e=>FH(t,e))}notify(t){Qa.batch(()=>{this.listeners.forEach(e=>{e(t)})})}resumePausedMutations(){const t=this.getAll().filter(e=>e.state.isPaused);return Qa.batch(()=>Promise.all(t.map(e=>e.continue().catch(Bs))))}};function n1(t){return t.options.scope?.id}var Cpe=class extends Hg{#t;#e=void 0;#n;#a;constructor(e,n){super(),this.#t=e,this.setOptions(n),this.bindMethods(),this.#r()}bindMethods(){this.mutate=this.mutate.bind(this),this.reset=this.reset.bind(this)}setOptions(e){const n=this.options;this.options=this.#t.defaultMutationOptions(e),lw(this.options,n)||this.#t.getMutationCache().notify({type:"observerOptionsUpdated",mutation:this.#n,observer:this}),n?.mutationKey&&this.options.mutationKey&&hg(n.mutationKey)!==hg(this.options.mutationKey)?this.reset():this.#n?.state.status==="pending"&&this.#n.setOptions(this.options)}onUnsubscribe(){this.hasListeners()||this.#n?.removeObserver(this)}onMutationUpdate(e){this.#r(),this.#i(e)}getCurrentResult(){return this.#e}reset(){this.#n?.removeObserver(this),this.#n=void 0,this.#r(),this.#i()}mutate(e,n){return this.#a=n,this.#n?.removeObserver(this),this.#n=this.#t.getMutationCache().build(this.#t,this.options),this.#n.addObserver(this),this.#n.execute(e)}#r(){const e=this.#n?.state??GQ();this.#e={...e,isPending:e.status==="pending",isSuccess:e.status==="success",isError:e.status==="error",isIdle:e.status==="idle",mutate:this.mutate,reset:this.reset}}#i(e){Qa.batch(()=>{if(this.#a&&this.hasListeners()){const n=this.#e.variables,r=this.#e.context,i={client:this.#t,meta:this.options.meta,mutationKey:this.options.mutationKey};if(e?.type==="success"){try{this.#a.onSuccess?.(e.data,n,r,i)}catch(s){Promise.reject(s)}try{this.#a.onSettled?.(e.data,null,n,r,i)}catch(s){Promise.reject(s)}}else if(e?.type==="error"){try{this.#a.onError?.(e.error,n,r,i)}catch(s){Promise.reject(s)}try{this.#a.onSettled?.(void 0,e.error,n,r,i)}catch(s){Promise.reject(s)}}}this.listeners.forEach(n=>{n(this.#e)})})}};function qH(t,e){const n=new Set(e);return t.filter(r=>!n.has(r))}function Ppe(t,e,n){const r=t.slice(0);return r[e]=n,r}var Tpe=class extends Hg{#t;#e;#n;#a;#r;#i;#o;#s;#p;#u=[];constructor(t,e,n){super(),this.#t=t,this.#a=n,this.#n=[],this.#r=[],this.#e=[],this.setQueries(e)}onSubscribe(){this.listeners.size===1&&this.#r.forEach(t=>{t.subscribe(e=>{this.#l(t,e)})})}onUnsubscribe(){this.listeners.size||this.destroy()}destroy(){this.listeners=new Set,this.#r.forEach(t=>{t.destroy()})}setQueries(t,e){this.#n=t,this.#a=e,Qa.batch(()=>{const n=this.#r,r=this.#d(this.#n);r.forEach(u=>u.observer.setOptions(u.defaultedQueryOptions));const i=r.map(u=>u.observer),s=i.map(u=>u.getCurrentResult()),o=n.length!==i.length,l=i.some((u,m)=>u!==n[m]),c=o||l,d=c?!0:s.some((u,m)=>{const p=this.#e[m];return!p||!lw(u,p)});!c&&!d||(c&&(this.#u=r,this.#r=i),this.#e=s,this.hasListeners()&&(c&&(qH(n,i).forEach(u=>{u.destroy()}),qH(i,n).forEach(u=>{u.subscribe(m=>{this.#l(u,m)})})),this.#h()))})}getCurrentResult(){return this.#e}getQueries(){return this.#r.map(t=>t.getCurrentQuery())}getObservers(){return this.#r}getOptimisticResult(t,e){const n=this.#d(t),r=n.map(s=>s.observer.getOptimisticResult(s.defaultedQueryOptions)),i=n.map(s=>s.defaultedQueryOptions.queryHash);return[r,s=>this.#c(s??r,e,i),()=>this.#m(r,n)]}#m(t,e){return e.map((n,r)=>{const i=t[r];return n.defaultedQueryOptions.notifyOnChangeProps?i:n.observer.trackResult(i,s=>{e.forEach(o=>{o.observer.trackProp(s)})})})}#c(t,e,n){if(e){const r=this.#p,i=n!==void 0&&r!==void 0&&(r.length!==n.length||n.some((s,o)=>s!==r[o]));return(!this.#i||this.#e!==this.#s||i||e!==this.#o)&&(this.#o=e,this.#s=this.#e,n!==void 0&&(this.#p=n),this.#i=UI(this.#i,e(t))),this.#i}return t}#d(t){const e=new Map;this.#r.forEach(r=>{const i=r.options.queryHash;if(!i)return;const s=e.get(i);s?s.push(r):e.set(i,[r])});const n=[];return t.forEach(r=>{const i=this.#t.defaultQueryOptions(r),o=e.get(i.queryHash)?.shift()??new $I(this.#t,i);n.push({defaultedQueryOptions:i,observer:o})}),n}#l(t,e){const n=this.#r.indexOf(t);n!==-1&&(this.#e=Ppe(this.#e,n,e),this.#h())}#h(){if(this.hasListeners()){const t=this.#i,e=this.#m(this.#e,this.#u),n=this.#c(e,this.#a?.combine);t!==n&&Qa.batch(()=>{this.listeners.forEach(r=>{r(this.#e)})})}}},Ape=class extends Hg{constructor(t={}){super(),this.config=t,this.#t=new Map}#t;build(t,e,n){const r=e.queryKey,i=e.queryHash??zI(r,e);let s=this.get(i);return s||(s=new vpe({client:t,queryKey:r,queryHash:i,options:t.defaultQueryOptions(e),state:n,defaultOptions:t.getQueryDefaults(r)}),this.add(s)),s}add(t){this.#t.has(t.queryHash)||(this.#t.set(t.queryHash,t),this.notify({type:"added",query:t}))}remove(t){const e=this.#t.get(t.queryHash);e&&(t.destroy(),e===t&&this.#t.delete(t.queryHash),this.notify({type:"removed",query:t}))}clear(){Qa.batch(()=>{this.getAll().forEach(t=>{this.remove(t)})})}get(t){return this.#t.get(t)}getAll(){return[...this.#t.values()]}find(t){const e={exact:!0,...t};return this.getAll().find(n=>DH(e,n))}findAll(t={}){const e=this.getAll();return Object.keys(t).length>0?e.filter(n=>DH(t,n)):e}notify(t){Qa.batch(()=>{this.listeners.forEach(e=>{e(t)})})}onFocus(){Qa.batch(()=>{this.getAll().forEach(t=>{t.onFocus()})})}onOnline(){Qa.batch(()=>{this.getAll().forEach(t=>{t.onOnline()})})}},jpe=class{#t;#e;#n;#a;#r;#i;#o;#s;constructor(t={}){this.#t=t.queryCache||new Ape,this.#e=t.mutationCache||new Npe,this.#n=t.defaultOptions||{},this.#a=new Map,this.#r=new Map,this.#i=0}mount(){this.#i++,this.#i===1&&(this.#o=qI.subscribe(async t=>{t&&(await this.resumePausedMutations(),this.#t.onFocus())}),this.#s=_N.subscribe(async t=>{t&&(await this.resumePausedMutations(),this.#t.onOnline())}))}unmount(){this.#i--,this.#i===0&&(this.#o?.(),this.#o=void 0,this.#s?.(),this.#s=void 0)}isFetching(t){return this.#t.findAll({...t,fetchStatus:"fetching"}).length}isMutating(t){return this.#e.findAll({...t,status:"pending"}).length}getQueryData(t){const e=this.defaultQueryOptions({queryKey:t});return this.#t.get(e.queryHash)?.state.data}ensureQueryData(t){const e=this.defaultQueryOptions(t),n=this.#t.build(this,e),r=n.state.data;return r===void 0?this.fetchQuery(t):(t.revalidateIfStale&&n.isStaleByTime(rp(e.staleTime,n))&&this.prefetchQuery(e),Promise.resolve(r))}getQueriesData(t){return this.#t.findAll(t).map(({queryKey:e,state:n})=>{const r=n.data;return[e,r]})}setQueryData(t,e,n){const r=this.defaultQueryOptions({queryKey:t}),s=this.#t.get(r.queryHash)?.state.data,o=cpe(e,s);if(o!==void 0)return this.#t.build(this,r).setData(o,{...n,manual:!0})}setQueriesData(t,e,n){return Qa.batch(()=>this.#t.findAll(t).map(({queryKey:r})=>[r,this.setQueryData(r,e,n)]))}getQueryState(t){const e=this.defaultQueryOptions({queryKey:t});return this.#t.get(e.queryHash)?.state}removeQueries(t){const e=this.#t;Qa.batch(()=>{e.findAll(t).forEach(n=>{e.remove(n)})})}resetQueries(t,e){const n=this.#t;return Qa.batch(()=>(n.findAll(t).forEach(r=>{r.reset()}),this.refetchQueries({type:"active",...t},e)))}cancelQueries(t,e={}){const n={revert:!0,...e},r=Qa.batch(()=>this.#t.findAll(t).map(i=>i.cancel(n)));return Promise.all(r).then(Bs).catch(Bs)}invalidateQueries(t,e={}){return Qa.batch(()=>(this.#t.findAll(t).forEach(n=>{n.invalidate()}),t?.refetchType==="none"?Promise.resolve():this.refetchQueries({...t,type:t?.refetchType??t?.type??"active"},e)))}refetchQueries(t,e={}){const n={...e,cancelRefetch:e.cancelRefetch??!0},r=Qa.batch(()=>this.#t.findAll(t).filter(i=>!i.isDisabled()&&!i.isStatic()).map(i=>{let s=i.fetch(void 0,n);return n.throwOnError||(s=s.catch(Bs)),i.state.fetchStatus==="paused"?Promise.resolve():s}));return Promise.all(r).then(Bs)}fetchQuery(t){const e=this.defaultQueryOptions(t);e.retry===void 0&&(e.retry=!1);const n=this.#t.build(this,e);return n.isStaleByTime(rp(e.staleTime,n))?n.fetch(e):Promise.resolve(n.state.data)}prefetchQuery(t){return this.fetchQuery(t).then(Bs).catch(Bs)}fetchInfiniteQuery(t){return t.behavior=BH(t.pages),this.fetchQuery(t)}prefetchInfiniteQuery(t){return this.fetchInfiniteQuery(t).then(Bs).catch(Bs)}ensureInfiniteQueryData(t){return t.behavior=BH(t.pages),this.ensureQueryData(t)}resumePausedMutations(){return _N.isOnline()?this.#e.resumePausedMutations():Promise.resolve()}getQueryCache(){return this.#t}getMutationCache(){return this.#e}getDefaultOptions(){return this.#n}setDefaultOptions(t){this.#n=t}setQueryDefaults(t,e){this.#a.set(hg(t),{queryKey:t,defaultOptions:e})}getQueryDefaults(t){const e=[...this.#a.values()],n={};return e.forEach(r=>{ow(t,r.queryKey)&&Object.assign(n,r.defaultOptions)}),n}setMutationDefaults(t,e){this.#r.set(hg(t),{mutationKey:t,defaultOptions:e})}getMutationDefaults(t){const e=[...this.#r.values()],n={};return e.forEach(r=>{ow(t,r.mutationKey)&&Object.assign(n,r.defaultOptions)}),n}defaultQueryOptions(t){if(t._defaulted)return t;const e={...this.#n.queries,...this.getQueryDefaults(t.queryKey),...t,_defaulted:!0};return e.queryHash||(e.queryHash=zI(e.queryKey,e)),e.refetchOnReconnect===void 0&&(e.refetchOnReconnect=e.networkMode!=="always"),e.throwOnError===void 0&&(e.throwOnError=!!e.suspense),!e.networkMode&&e.persister&&(e.networkMode="offlineFirst"),e.queryFn===BI&&(e.enabled=!1),e}defaultMutationOptions(t){return t?._defaulted?t:{...this.#n.mutations,...t?.mutationKey&&this.getMutationDefaults(t.mutationKey),...t,_defaulted:!0}}clear(){this.#t.clear(),this.#e.clear()}},WQ=w.createContext(void 0),tn=t=>{const e=w.useContext(WQ);if(!e)throw new Error("No QueryClient set, use QueryClientProvider to set one");return e},Mpe=({client:t,children:e})=>(w.useEffect(()=>(t.mount(),()=>{t.unmount()}),[t]),a.jsx(WQ.Provider,{value:t,children:e})),KQ=w.createContext(!1),XQ=()=>w.useContext(KQ);KQ.Provider;function Epe(){let t=!1;return{clearReset:()=>{t=!1},reset:()=>{t=!0},isReset:()=>t}}var Dpe=w.createContext(Epe()),YQ=()=>w.useContext(Dpe),QQ=(t,e,n)=>{const r=n?.state.error&&typeof t.throwOnError=="function"?HI(t.throwOnError,[n.state.error,n]):t.throwOnError;(t.suspense||t.experimental_prefetchInRender||r)&&(e.isReset()||(t.retryOnMount=!1))},JQ=t=>{w.useEffect(()=>{t.clearReset()},[t])},ZQ=({result:t,errorResetBoundary:e,throwOnError:n,query:r,suspense:i})=>t.isError&&!e.isReset()&&!t.isFetching&&r&&(i&&t.data===void 0||HI(n,[t.error,r])),eJ=t=>{if(t.suspense){const n=i=>i==="static"?i:Math.max(i??1e3,1e3),r=t.staleTime;t.staleTime=typeof r=="function"?(...i)=>n(r(...i)):n(r),typeof t.gcTime=="number"&&(t.gcTime=Math.max(t.gcTime,1e3))}},tJ=(t,e)=>t.isLoading&&t.isFetching&&!e,fF=(t,e)=>t?.suspense&&e.isPending,kN=(t,e,n)=>e.fetchOptimistic(t).catch(()=>{n.clearReset()});function Dp({queries:t,...e},n){const r=tn(),i=XQ(),s=YQ(),o=w.useMemo(()=>t.map(v=>{const b=r.defaultQueryOptions(v);return b._optimisticResults=i?"isRestoring":"optimistic",b}),[t,r,i]);o.forEach(v=>{eJ(v);const b=r.getQueryCache().get(v.queryHash);QQ(v,s,b)}),JQ(s);const[l]=w.useState(()=>new Tpe(r,o,e)),[c,d,u]=l.getOptimisticResult(o,e.combine),m=!i&&e.subscribed!==!1;w.useSyncExternalStore(w.useCallback(v=>m?l.subscribe(Qa.batchCalls(v)):Bs,[l,m]),()=>l.getCurrentResult(),()=>l.getCurrentResult()),w.useEffect(()=>{l.setQueries(o,e)},[o,e,l]);const f=c.some((v,b)=>fF(o[b],v))?c.flatMap((v,b)=>{const g=o[b];if(g){const S=new $I(r,g);if(fF(g,v))return kN(g,S,s);tJ(v,i)&&kN(g,S,s)}return[]}):[];if(f.length>0)throw Promise.all(f);const x=c.find((v,b)=>{const g=o[b];return g&&ZQ({result:v,errorResetBoundary:s,throwOnError:g.throwOnError,query:r.getQueryCache().get(g.queryHash),suspense:g.suspense})});if(x?.error)throw x.error;return d(u())}function Fpe(t,e,n){const r=XQ(),i=YQ(),s=tn(),o=s.defaultQueryOptions(t);s.getDefaultOptions().queries?._experimental_beforeQuery?.(o);const l=s.getQueryCache().get(o.queryHash);o._optimisticResults=r?"isRestoring":"optimistic",eJ(o),QQ(o,i,l),JQ(i);const c=!s.getQueryCache().get(o.queryHash),[d]=w.useState(()=>new e(s,o)),u=d.getOptimisticResult(o),m=!r&&t.subscribed!==!1;if(w.useSyncExternalStore(w.useCallback(p=>{const f=m?d.subscribe(Qa.batchCalls(p)):Bs;return d.updateResult(),f},[d,m]),()=>d.getCurrentResult(),()=>d.getCurrentResult()),w.useEffect(()=>{d.setOptions(o)},[o,d]),fF(o,u))throw kN(o,d,i);if(ZQ({result:u,errorResetBoundary:i,throwOnError:o.throwOnError,query:l,suspense:o.suspense}))throw u.error;return s.getDefaultOptions().queries?._experimental_afterQuery?.(o,u),o.experimental_prefetchInRender&&!mg&&tJ(u,r)&&(c?kN(o,d,i):l?.promise)?.catch(Bs).finally(()=>{d.updateResult()}),o.notifyOnChangeProps?u:d.trackResult(u)}function Qe(t,e){return Fpe(t,$I)}function ot(t,e){const n=tn(),[r]=w.useState(()=>new Cpe(n,t));w.useEffect(()=>{r.setOptions(t)},[r,t]);const i=w.useSyncExternalStore(w.useCallback(o=>r.subscribe(Qa.batchCalls(o)),[r]),()=>r.getCurrentResult(),()=>r.getCurrentResult()),s=w.useCallback((o,l)=>{r.mutate(o,l).catch(Bs)},[r]);if(i.error&&HI(r.options.throwOnError,[i.error]))throw i.error;return{...i,mutate:s,mutateAsync:i.mutate}}const Rpe=t=>t.replace(/([a-z0-9])([A-Z])/g,"$1-$2").toLowerCase(),Lpe=t=>t.replace(/^([A-Z])|[\s-_]+(\w)/g,(e,n,r)=>r?r.toUpperCase():n.toLowerCase()),$H=t=>{const e=Lpe(t);return e.charAt(0).toUpperCase()+e.slice(1)},nJ=(...t)=>t.filter((e,n,r)=>!!e&&e.trim()!==""&&r.indexOf(e)===n).join(" ").trim(),Ipe=t=>{for(const e in t)if(e.startsWith("aria-")||e==="role"||e==="title")return!0};var Ope={xmlns:"http://www.w3.org/2000/svg",width:24,height:24,viewBox:"0 0 24 24",fill:"none",stroke:"currentColor",strokeWidth:2,strokeLinecap:"round",strokeLinejoin:"round"};const zpe=w.forwardRef(({color:t="currentColor",size:e=24,strokeWidth:n=2,absoluteStrokeWidth:r,className:i="",children:s,iconNode:o,...l},c)=>w.createElement("svg",{ref:c,...Ope,width:e,height:e,stroke:t,strokeWidth:r?Number(n)*24/Number(e):n,className:nJ("lucide",i),...!s&&!Ipe(l)&&{"aria-hidden":"true"},...l},[...o.map(([d,u])=>w.createElement(d,u)),...Array.isArray(s)?s:[s]]));const ut=(t,e)=>{const n=w.forwardRef(({className:r,...i},s)=>w.createElement(zpe,{ref:s,iconNode:e,className:nJ(`lucide-${Rpe($H(t))}`,`lucide-${t}`,r),...i}));return n.displayName=$H(t),n};const Upe=[["path",{d:"M18 17.5a2.5 2.5 0 1 1-4 2.03V12",key:"yd12zl"}],["path",{d:"M6 12H4a2 2 0 0 1-2-2V5a2 2 0 0 1 2-2h16a2 2 0 0 1 2 2v5a2 2 0 0 1-2 2h-2",key:"larmp2"}],["path",{d:"M6 8h12",key:"6g4wlu"}],["path",{d:"M6.6 15.572A2 2 0 1 0 10 17v-5",key:"1x1kqn"}]],Bpe=ut("air-vent",Upe);const Hpe=[["rect",{width:"20",height:"5",x:"2",y:"3",rx:"1",key:"1wp1u1"}],["path",{d:"M4 8v11a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8",key:"1s80jp"}],["path",{d:"M10 12h4",key:"a56b0p"}]],lo=ut("archive",Hpe);const qpe=[["path",{d:"m3 16 4 4 4-4",key:"1co6wj"}],["path",{d:"M7 20V4",key:"1yoxec"}],["path",{d:"M11 4h10",key:"1w87gc"}],["path",{d:"M11 8h7",key:"djye34"}],["path",{d:"M11 12h4",key:"q8tih4"}]],$pe=ut("arrow-down-wide-narrow",qpe);const Vpe=[["path",{d:"M12 5v14",key:"s699le"}],["path",{d:"m19 12-7 7-7-7",key:"1idqje"}]],pg=ut("arrow-down",Vpe);const Gpe=[["path",{d:"m12 19-7-7 7-7",key:"1l729n"}],["path",{d:"M19 12H5",key:"x3x0zl"}]],GI=ut("arrow-left",Gpe);const Wpe=[["path",{d:"m16 3 4 4-4 4",key:"1x1c3m"}],["path",{d:"M20 7H4",key:"zbl0bi"}],["path",{d:"m8 21-4-4 4-4",key:"h9nckh"}],["path",{d:"M4 17h16",key:"g4d7ey"}]],gF=ut("arrow-right-left",Wpe);const Kpe=[["path",{d:"M5 12h14",key:"1ays0h"}],["path",{d:"m12 5 7 7-7 7",key:"xquz4c"}]],NN=ut("arrow-right",Kpe);const Xpe=[["path",{d:"m21 16-4 4-4-4",key:"f6ql7i"}],["path",{d:"M17 20V4",key:"1ejh1v"}],["path",{d:"m3 8 4-4 4 4",key:"11wl7u"}],["path",{d:"M7 4v16",key:"1glfcx"}]],WI=ut("arrow-up-down",Xpe);const Ype=[["path",{d:"m3 8 4-4 4 4",key:"11wl7u"}],["path",{d:"M7 4v16",key:"1glfcx"}],["path",{d:"M11 12h4",key:"q8tih4"}],["path",{d:"M11 16h7",key:"uosisv"}],["path",{d:"M11 20h10",key:"jvxblo"}]],Qpe=ut("arrow-up-narrow-wide",Ype);const Jpe=[["path",{d:"m5 12 7-7 7 7",key:"hav0vg"}],["path",{d:"M12 19V5",key:"x0mq9r"}]],wp=ut("arrow-up",Jpe);const Zpe=[["path",{d:"M4.5 3h15",key:"c7n0jr"}],["path",{d:"M6 3v16a2 2 0 0 0 2 2h8a2 2 0 0 0 2-2V3",key:"m1uhx7"}],["path",{d:"M6 14h12",key:"4cwo0f"}]],efe=ut("beaker",Zpe);const tfe=[["path",{d:"M10.268 21a2 2 0 0 0 3.464 0",key:"vwvbt9"}],["path",{d:"M17 17H4a1 1 0 0 1-.74-1.673C4.59 13.956 6 12.499 6 8a6 6 0 0 1 .258-1.742",key:"178tsu"}],["path",{d:"m2 2 20 20",key:"1ooewy"}],["path",{d:"M8.668 3.01A6 6 0 0 1 18 8c0 2.687.77 4.653 1.707 6.05",key:"1hqiys"}]],nfe=ut("bell-off",tfe);const rfe=[["path",{d:"M10.268 21a2 2 0 0 0 3.464 0",key:"vwvbt9"}],["path",{d:"M3.262 15.326A1 1 0 0 0 4 17h16a1 1 0 0 0 .74-1.673C19.41 13.956 18 12.499 18 8A6 6 0 0 0 6 8c0 4.499-1.411 5.956-2.738 7.326",key:"11g9vi"}]],ap=ut("bell",rfe);const afe=[["path",{d:"M6 12h9a4 4 0 0 1 0 8H7a1 1 0 0 1-1-1V5a1 1 0 0 1 1-1h7a4 4 0 0 1 0 8",key:"mg9rjx"}]],ife=ut("bold",afe);const sfe=[["path",{d:"M4 19.5v-15A2.5 2.5 0 0 1 6.5 2H19a1 1 0 0 1 1 1v18a1 1 0 0 1-1 1H6.5a1 1 0 0 1 0-5H20",key:"k3hazp"}]],ofe=ut("book",sfe);const lfe=[["path",{d:"m19 21-7-4-7 4V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2v16z",key:"1fy3hk"}]],cfe=ut("bookmark",lfe);const dfe=[["path",{d:"M21 8a2 2 0 0 0-1-1.73l-7-4a2 2 0 0 0-2 0l-7 4A2 2 0 0 0 3 8v8a2 2 0 0 0 1 1.73l7 4a2 2 0 0 0 2 0l7-4A2 2 0 0 0 21 16Z",key:"hh9hay"}],["path",{d:"m3.3 7 8.7 5 8.7-5",key:"g66t2b"}],["path",{d:"M12 22V12",key:"d0xqtd"}]],xi=ut("box",dfe);const ufe=[["path",{d:"M16 20V4a2 2 0 0 0-2-2h-4a2 2 0 0 0-2 2v16",key:"jecpp"}],["rect",{width:"20",height:"14",x:"2",y:"6",rx:"2",key:"i6l2r4"}]],rJ=ut("briefcase",ufe);const mfe=[["path",{d:"M12 20v-9",key:"1qisl0"}],["path",{d:"M14 7a4 4 0 0 1 4 4v3a6 6 0 0 1-12 0v-3a4 4 0 0 1 4-4z",key:"uouzyp"}],["path",{d:"M14.12 3.88 16 2",key:"qol33r"}],["path",{d:"M21 21a4 4 0 0 0-3.81-4",key:"1b0z45"}],["path",{d:"M21 5a4 4 0 0 1-3.55 3.97",key:"5cxbf6"}],["path",{d:"M22 13h-4",key:"1jl80f"}],["path",{d:"M3 21a4 4 0 0 1 3.81-4",key:"1fjd4g"}],["path",{d:"M3 5a4 4 0 0 0 3.55 3.97",key:"1d7oge"}],["path",{d:"M6 13H2",key:"82j7cp"}],["path",{d:"m8 2 1.88 1.88",key:"fmnt4t"}],["path",{d:"M9 7.13V6a3 3 0 1 1 6 0v1.13",key:"1vgav8"}]],Yx=ut("bug",mfe);const hfe=[["path",{d:"M17 19a1 1 0 0 1-1-1v-2a2 2 0 0 1 2-2h2a2 2 0 0 1 2 2v2a1 1 0 0 1-1 1z",key:"trhst0"}],["path",{d:"M17 21v-2",key:"ds4u3f"}],["path",{d:"M19 14V6.5a1 1 0 0 0-7 0v11a1 1 0 0 1-7 0V10",key:"1mo9zo"}],["path",{d:"M21 21v-2",key:"eo0ou"}],["path",{d:"M3 5V3",key:"1k5hjh"}],["path",{d:"M4 10a2 2 0 0 1-2-2V6a1 1 0 0 1 1-1h4a1 1 0 0 1 1 1v2a2 2 0 0 1-2 2z",key:"1dd30t"}],["path",{d:"M7 5V3",key:"1t1388"}]],KI=ut("cable",hfe);const pfe=[["rect",{width:"16",height:"20",x:"4",y:"2",rx:"2",key:"1nb95v"}],["line",{x1:"8",x2:"16",y1:"6",y2:"6",key:"x4nwl0"}],["line",{x1:"16",x2:"16",y1:"14",y2:"18",key:"wjye3r"}],["path",{d:"M16 10h.01",key:"1m94wz"}],["path",{d:"M12 10h.01",key:"1nrarc"}],["path",{d:"M8 10h.01",key:"19clt8"}],["path",{d:"M12 14h.01",key:"1etili"}],["path",{d:"M8 14h.01",key:"6423bh"}],["path",{d:"M12 18h.01",key:"mhygvu"}],["path",{d:"M8 18h.01",key:"lrp35t"}]],ffe=ut("calculator",pfe);const gfe=[["path",{d:"M8 2v4",key:"1cmpym"}],["path",{d:"M16 2v4",key:"4m81vk"}],["rect",{width:"18",height:"18",x:"3",y:"4",rx:"2",key:"1hopcy"}],["path",{d:"M3 10h18",key:"8toen8"}],["path",{d:"M8 14h.01",key:"6423bh"}],["path",{d:"M12 14h.01",key:"1etili"}],["path",{d:"M16 14h.01",key:"1gbofw"}],["path",{d:"M8 18h.01",key:"lrp35t"}],["path",{d:"M12 18h.01",key:"mhygvu"}],["path",{d:"M16 18h.01",key:"kzsmim"}]],bfe=ut("calendar-days",gfe);const xfe=[["path",{d:"M16 19h6",key:"xwg31i"}],["path",{d:"M16 2v4",key:"4m81vk"}],["path",{d:"M19 16v6",key:"tddt3s"}],["path",{d:"M21 12.598V6a2 2 0 0 0-2-2H5a2 2 0 0 0-2 2v14a2 2 0 0 0 2 2h8.5",key:"1glfrc"}],["path",{d:"M3 10h18",key:"8toen8"}],["path",{d:"M8 2v4",key:"1cmpym"}]],yfe=ut("calendar-plus",xfe);const vfe=[["path",{d:"M8 2v4",key:"1cmpym"}],["path",{d:"M16 2v4",key:"4m81vk"}],["rect",{width:"18",height:"18",x:"3",y:"4",rx:"2",key:"1hopcy"}],["path",{d:"M3 10h18",key:"8toen8"}]],da=ut("calendar",vfe);const wfe=[["path",{d:"M13.997 4a2 2 0 0 1 1.76 1.05l.486.9A2 2 0 0 0 18.003 7H20a2 2 0 0 1 2 2v9a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V9a2 2 0 0 1 2-2h1.997a2 2 0 0 0 1.759-1.048l.489-.904A2 2 0 0 1 10.004 4z",key:"18u6gg"}],["circle",{cx:"12",cy:"13",r:"3",key:"1vg3eu"}]],Qx=ut("camera",wfe);const Sfe=[["path",{d:"M3 3v16a2 2 0 0 0 2 2h16",key:"c24i48"}],["path",{d:"M18 17V9",key:"2bz60n"}],["path",{d:"M13 17V5",key:"1frdt8"}],["path",{d:"M8 17v-3",key:"17ska0"}]],_fe=ut("chart-column",Sfe);const kfe=[["path",{d:"M6 5h12",key:"fvfigv"}],["path",{d:"M4 12h10",key:"oujl3d"}],["path",{d:"M12 19h8",key:"baeox8"}]],Nfe=ut("chart-no-axes-gantt",kfe);const Cfe=[["path",{d:"M20 6 9 17l-5-5",key:"1gmf2c"}]],jr=ut("check",Cfe);const Pfe=[["path",{d:"m6 9 6 6 6-6",key:"qrunsl"}]],zn=ut("chevron-down",Pfe);const Tfe=[["path",{d:"m9 18 6-6-6-6",key:"mthhwq"}]],za=ut("chevron-right",Tfe);const Afe=[["path",{d:"m15 18-6-6 6-6",key:"1wnfg3"}]],Uo=ut("chevron-left",Afe);const jfe=[["path",{d:"m18 15-6-6-6 6",key:"153udz"}]],lc=ut("chevron-up",jfe);const Mfe=[["path",{d:"m11 17-5-5 5-5",key:"13zhaf"}],["path",{d:"m18 17-5-5 5-5",key:"h8a8et"}]],XI=ut("chevrons-left",Mfe);const Efe=[["path",{d:"m6 17 5-5-5-5",key:"xnjwq"}],["path",{d:"m13 17 5-5-5-5",key:"17xmmf"}]],YI=ut("chevrons-right",Efe);const Dfe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["line",{x1:"12",x2:"12",y1:"8",y2:"12",key:"1pkeuh"}],["line",{x1:"12",x2:"12.01",y1:"16",y2:"16",key:"4dfq90"}]],Oa=ut("circle-alert",Dfe);const Ffe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["path",{d:"m16 12-4-4-4 4",key:"177agl"}],["path",{d:"M12 16V8",key:"1sbj14"}]],IM=ut("circle-arrow-up",Ffe);const Rfe=[["path",{d:"M21.801 10A10 10 0 1 1 17 3.335",key:"yps3ct"}],["path",{d:"m9 11 3 3L22 4",key:"1pflzl"}]],wr=ut("circle-check-big",Rfe);const Lfe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["path",{d:"m9 12 2 2 4-4",key:"dzmm74"}]],Bc=ut("circle-check",Lfe);const Ife=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["circle",{cx:"12",cy:"12",r:"1",key:"41hilf"}]],Ofe=ut("circle-dot",Ife);const zfe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["rect",{x:"9",y:"9",width:"6",height:"6",rx:"1",key:"1ssd4o"}]],Ufe=ut("circle-stop",zfe);const Bfe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["path",{d:"m15 9-6 6",key:"1uzhvr"}],["path",{d:"m9 9 6 6",key:"z0biqf"}]],Da=ut("circle-x",Bfe);const Hfe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}]],cw=ut("circle",Hfe);const qfe=[["rect",{width:"8",height:"4",x:"8",y:"2",rx:"1",ry:"1",key:"tgr4d6"}],["path",{d:"M16 4h2a2 2 0 0 1 2 2v14a2 2 0 0 1-2 2H6a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h2",key:"116196"}],["path",{d:"M12 11h4",key:"1jrz19"}],["path",{d:"M12 16h4",key:"n85exb"}],["path",{d:"M8 11h.01",key:"1dfujw"}],["path",{d:"M8 16h.01",key:"18s6g9"}]],$fe=ut("clipboard-list",qfe);const Vfe=[["path",{d:"M12 6v6l4 2",key:"mmk7yg"}],["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}]],Yn=ut("clock",Vfe);const Gfe=[["path",{d:"m2 2 20 20",key:"1ooewy"}],["path",{d:"M5.782 5.782A7 7 0 0 0 9 19h8.5a4.5 4.5 0 0 0 1.307-.193",key:"yfwify"}],["path",{d:"M21.532 16.5A4.5 4.5 0 0 0 17.5 10h-1.79A7.008 7.008 0 0 0 10 5.07",key:"jlfiyv"}]],bF=ut("cloud-off",Gfe);const Wfe=[["path",{d:"M17.5 19H9a7 7 0 1 1 6.71-9h1.79a4.5 4.5 0 1 1 0 9Z",key:"p7xjir"}]],qg=ut("cloud",Wfe);const Kfe=[["path",{d:"m18 16 4-4-4-4",key:"1inbqp"}],["path",{d:"m6 8-4 4 4 4",key:"15zrgr"}],["path",{d:"m14.5 4-5 16",key:"e7oirm"}]],Xfe=ut("code-xml",Kfe);const Yfe=[["path",{d:"m16 18 6-6-6-6",key:"eg8j8"}],["path",{d:"m8 6-6 6 6 6",key:"ppft3o"}]],Py=ut("code",Yfe);const Qfe=[["path",{d:"M10 2v2",key:"7u0qdc"}],["path",{d:"M14 2v2",key:"6buw04"}],["path",{d:"M16 8a1 1 0 0 1 1 1v8a4 4 0 0 1-4 4H7a4 4 0 0 1-4-4V9a1 1 0 0 1 1-1h14a4 4 0 1 1 0 8h-1",key:"pwadti"}],["path",{d:"M6 2v2",key:"colzsn"}]],Jfe=ut("coffee",Qfe);const Zfe=[["circle",{cx:"8",cy:"8",r:"6",key:"3yglwk"}],["path",{d:"M18.09 10.37A6 6 0 1 1 10.34 18",key:"t5s6rm"}],["path",{d:"M7 6h1v4",key:"1obek4"}],["path",{d:"m16.71 13.88.7.71-2.82 2.82",key:"1rbuyh"}]],ege=ut("coins",Zfe);const tge=[["path",{d:"M11 10.27 7 3.34",key:"16pf9h"}],["path",{d:"m11 13.73-4 6.93",key:"794ttg"}],["path",{d:"M12 22v-2",key:"1osdcq"}],["path",{d:"M12 2v2",key:"tus03m"}],["path",{d:"M14 12h8",key:"4f43i9"}],["path",{d:"m17 20.66-1-1.73",key:"eq3orb"}],["path",{d:"m17 3.34-1 1.73",key:"2wel8s"}],["path",{d:"M2 12h2",key:"1t8f8n"}],["path",{d:"m20.66 17-1.73-1",key:"sg0v6f"}],["path",{d:"m20.66 7-1.73 1",key:"1ow05n"}],["path",{d:"m3.34 17 1.73-1",key:"nuk764"}],["path",{d:"m3.34 7 1.73 1",key:"1ulond"}],["circle",{cx:"12",cy:"12",r:"2",key:"1c9p78"}],["circle",{cx:"12",cy:"12",r:"8",key:"46899m"}]],Ud=ut("cog",tge);const nge=[["rect",{width:"18",height:"18",x:"3",y:"3",rx:"2",key:"afitv7"}],["path",{d:"M12 3v18",key:"108xh3"}]],rge=ut("columns-2",nge);const age=[["path",{d:"m16.24 7.76-1.804 5.411a2 2 0 0 1-1.265 1.265L7.76 16.24l1.804-5.411a2 2 0 0 1 1.265-1.265z",key:"9ktpf1"}],["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}]],ige=ut("compass",age);const sge=[["rect",{width:"14",height:"14",x:"8",y:"8",rx:"2",ry:"2",key:"17jyea"}],["path",{d:"M4 16c-1.1 0-2-.9-2-2V4c0-1.1.9-2 2-2h10c1.1 0 2 .9 2 2",key:"zix9uf"}]],ns=ut("copy",sge);const oge=[["path",{d:"M12 20v2",key:"1lh1kg"}],["path",{d:"M12 2v2",key:"tus03m"}],["path",{d:"M17 20v2",key:"1rnc9c"}],["path",{d:"M17 2v2",key:"11trls"}],["path",{d:"M2 12h2",key:"1t8f8n"}],["path",{d:"M2 17h2",key:"7oei6x"}],["path",{d:"M2 7h2",key:"asdhe0"}],["path",{d:"M20 12h2",key:"1q8mjw"}],["path",{d:"M20 17h2",key:"1fpfkl"}],["path",{d:"M20 7h2",key:"1o8tra"}],["path",{d:"M7 20v2",key:"4gnj0m"}],["path",{d:"M7 2v2",key:"1i4yhu"}],["rect",{x:"4",y:"4",width:"16",height:"16",rx:"2",key:"1vbyd7"}],["rect",{x:"8",y:"8",width:"8",height:"8",rx:"1",key:"z9xiuo"}]],f0=ut("cpu",oge);const lge=[["ellipse",{cx:"12",cy:"5",rx:"9",ry:"3",key:"msslwz"}],["path",{d:"M3 5v14a9 3 0 0 0 18 0V5",key:"aqi0yr"}]],cge=ut("cylinder",lge);const dge=[["ellipse",{cx:"12",cy:"5",rx:"9",ry:"3",key:"msslwz"}],["path",{d:"M3 5V19A9 3 0 0 0 21 19V5",key:"1wlel7"}],["path",{d:"M3 12A9 3 0 0 0 21 12",key:"mv7ke4"}]],Jl=ut("database",dge);const uge=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["path",{d:"M6 12c0-1.7.7-3.2 1.8-4.2",key:"oqkarx"}],["circle",{cx:"12",cy:"12",r:"2",key:"1c9p78"}],["path",{d:"M18 12c0 1.7-.7 3.2-1.8 4.2",key:"1eah9h"}]],mge=ut("disc-3",uge);const hge=[["line",{x1:"12",x2:"12",y1:"2",y2:"22",key:"7eqyqh"}],["path",{d:"M17 5H9.5a3.5 3.5 0 0 0 0 7h5a3.5 3.5 0 0 1 0 7H6",key:"1b0p4s"}]],CN=ut("dollar-sign",hge);const pge=[["path",{d:"M10 12h.01",key:"1kxr2c"}],["path",{d:"M18 20V6a2 2 0 0 0-2-2H8a2 2 0 0 0-2 2v14",key:"36qu9e"}],["path",{d:"M2 20h20",key:"owomy5"}]],fge=ut("door-closed",pge);const gge=[["path",{d:"M11 20H2",key:"nlcfvz"}],["path",{d:"M11 4.562v16.157a1 1 0 0 0 1.242.97L19 20V5.562a2 2 0 0 0-1.515-1.94l-4-1A2 2 0 0 0 11 4.561z",key:"au4z13"}],["path",{d:"M11 4H8a2 2 0 0 0-2 2v14",key:"74r1mk"}],["path",{d:"M14 12h.01",key:"1jfl7z"}],["path",{d:"M22 20h-3",key:"vhrsz"}]],bge=ut("door-open",gge);const xge=[["path",{d:"M12 15V3",key:"m9g1x1"}],["path",{d:"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4",key:"ih7n3h"}],["path",{d:"m7 10 5 5 5-5",key:"brsn70"}]],aa=ut("download",xge);const yge=[["path",{d:"M12 22a7 7 0 0 0 7-7c0-2-1-3.9-3-5.5s-3.5-4-4-6.5c-.5 2.5-2 4.9-4 6.5C6 11.1 5 13 5 15a7 7 0 0 0 7 7z",key:"c7niix"}]],QP=ut("droplet",yge);const vge=[["path",{d:"M7 16.3c2.2 0 4-1.83 4-4.05 0-1.16-.57-2.26-1.71-3.19S7.29 6.75 7 5.3c-.29 1.45-1.14 2.84-2.29 3.76S3 11.1 3 12.25c0 2.22 1.8 4.05 4 4.05z",key:"1ptgy4"}],["path",{d:"M12.56 6.6A10.97 10.97 0 0 0 14 3.02c.5 2.5 2 4.9 4 6.5s3 3.5 3 5.5a6.98 6.98 0 0 1-11.91 4.97",key:"1sl1rz"}]],QI=ut("droplets",vge);const wge=[["circle",{cx:"12",cy:"12",r:"1",key:"41hilf"}],["circle",{cx:"12",cy:"5",r:"1",key:"gxeob9"}],["circle",{cx:"12",cy:"19",r:"1",key:"lyex9k"}]],ip=ut("ellipsis-vertical",wge);const Sge=[["line",{x1:"5",x2:"19",y1:"9",y2:"9",key:"1nwqeh"}],["line",{x1:"5",x2:"19",y1:"15",y2:"15",key:"g8yjpy"}]],OM=ut("equal",Sge);const _ge=[["path",{d:"M21 21H8a2 2 0 0 1-1.42-.587l-3.994-3.999a2 2 0 0 1 0-2.828l10-10a2 2 0 0 1 2.829 0l5.999 6a2 2 0 0 1 0 2.828L12.834 21",key:"g5wo59"}],["path",{d:"m5.082 11.09 8.828 8.828",key:"1wx5vj"}]],kge=ut("eraser",_ge);const Nge=[["path",{d:"M15 3h6v6",key:"1q9fwt"}],["path",{d:"M10 14 21 3",key:"gplh6r"}],["path",{d:"M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6",key:"a6xqqp"}]],Ar=ut("external-link",Nge);const Cge=[["path",{d:"M10.733 5.076a10.744 10.744 0 0 1 11.205 6.575 1 1 0 0 1 0 .696 10.747 10.747 0 0 1-1.444 2.49",key:"ct8e1f"}],["path",{d:"M14.084 14.158a3 3 0 0 1-4.242-4.242",key:"151rxh"}],["path",{d:"M17.479 17.499a10.75 10.75 0 0 1-15.417-5.151 1 1 0 0 1 0-.696 10.75 10.75 0 0 1 4.446-5.143",key:"13bj9a"}],["path",{d:"m2 2 20 20",key:"1ooewy"}]],$g=ut("eye-off",Cge);const Pge=[["path",{d:"M2.062 12.348a1 1 0 0 1 0-.696 10.75 10.75 0 0 1 19.876 0 1 1 0 0 1 0 .696 10.75 10.75 0 0 1-19.876 0",key:"1nclc0"}],["circle",{cx:"12",cy:"12",r:"3",key:"1v7zrd"}]],pl=ut("eye",Pge);const Tge=[["path",{d:"M10.827 16.379a6.082 6.082 0 0 1-8.618-7.002l5.412 1.45a6.082 6.082 0 0 1 7.002-8.618l-1.45 5.412a6.082 6.082 0 0 1 8.618 7.002l-5.412-1.45a6.082 6.082 0 0 1-7.002 8.618l1.45-5.412Z",key:"484a7f"}],["path",{d:"M12 12v.01",key:"u5ubse"}]],aJ=ut("fan",Tge);const Age=[["path",{d:"M14.5 22H18a2 2 0 0 0 2-2V8a2.4 2.4 0 0 0-.706-1.706l-3.588-3.588A2.4 2.4 0 0 0 14 2H6a2 2 0 0 0-2 2v3.8",key:"1kchwa"}],["path",{d:"M14 2v5a1 1 0 0 0 1 1h5",key:"wfsgrz"}],["path",{d:"M11.7 14.2 7 17l-4.7-2.8",key:"1yk8tc"}],["path",{d:"M3 13.1a2 2 0 0 0-.999 1.76v3.24a2 2 0 0 0 .969 1.78L6 21.7a2 2 0 0 0 2.03.01L11 19.9a2 2 0 0 0 1-1.76V14.9a2 2 0 0 0-.97-1.78L8 11.3a2 2 0 0 0-2.03-.01z",key:"19flxy"}],["path",{d:"M7 17v5",key:"1yj1jh"}]],sp=ut("file-box",Age);const jge=[["path",{d:"M6 22a2 2 0 0 1-2-2V4a2 2 0 0 1 2-2h8a2.4 2.4 0 0 1 1.704.706l3.588 3.588A2.4 2.4 0 0 1 20 8v12a2 2 0 0 1-2 2z",key:"1oefj6"}],["path",{d:"M14 2v5a1 1 0 0 0 1 1h5",key:"wfsgrz"}],["path",{d:"M10 12.5 8 15l2 2.5",key:"1tg20x"}],["path",{d:"m14 12.5 2 2.5-2 2.5",key:"yinavb"}]],PN=ut("file-code",jge);const Mge=[["path",{d:"M6 22a2 2 0 0 1-2-2V4a2 2 0 0 1 2-2h8a2.4 2.4 0 0 1 1.704.706l3.588 3.588A2.4 2.4 0 0 1 20 8v12a2 2 0 0 1-2 2z",key:"1oefj6"}],["path",{d:"M12 9v4",key:"juzpu7"}],["path",{d:"M12 17h.01",key:"p32p05"}]],Ege=ut("file-exclamation-point",Mge);const Dge=[["path",{d:"M6 22a2 2 0 0 1-2-2V4a2 2 0 0 1 2-2h8a2.4 2.4 0 0 1 1.704.706l3.588 3.588A2.4 2.4 0 0 1 20 8v12a2 2 0 0 1-2 2z",key:"1oefj6"}],["path",{d:"M14 2v5a1 1 0 0 0 1 1h5",key:"wfsgrz"}],["path",{d:"M8 13h2",key:"yr2amv"}],["path",{d:"M14 13h2",key:"un5t4a"}],["path",{d:"M8 17h2",key:"2yhykz"}],["path",{d:"M14 17h2",key:"10kma7"}]],TN=ut("file-spreadsheet",Dge);const Fge=[["path",{d:"M6 22a2 2 0 0 1-2-2V4a2 2 0 0 1 2-2h8a2.4 2.4 0 0 1 1.704.706l3.588 3.588A2.4 2.4 0 0 1 20 8v12a2 2 0 0 1-2 2z",key:"1oefj6"}],["path",{d:"M14 2v5a1 1 0 0 0 1 1h5",key:"wfsgrz"}],["path",{d:"M10 9H8",key:"b1mrlr"}],["path",{d:"M16 13H8",key:"t4e002"}],["path",{d:"M16 17H8",key:"z1uh3a"}]],Ns=ut("file-text",Fge);const Rge=[["path",{d:"M6 22a2 2 0 0 1-2-2V4a2 2 0 0 1 2-2h8a2.4 2.4 0 0 1 1.704.706l3.588 3.588A2.4 2.4 0 0 1 20 8v12a2 2 0 0 1-2 2z",key:"1oefj6"}],["path",{d:"M14 2v5a1 1 0 0 0 1 1h5",key:"wfsgrz"}]],JP=ut("file",Rge);const Lge=[["rect",{width:"18",height:"18",x:"3",y:"3",rx:"2",key:"afitv7"}],["path",{d:"M7 3v18",key:"bbkbws"}],["path",{d:"M3 7.5h4",key:"zfgn84"}],["path",{d:"M3 12h18",key:"1i2n21"}],["path",{d:"M3 16.5h4",key:"1230mu"}],["path",{d:"M17 3v18",key:"in4fa5"}],["path",{d:"M17 7.5h4",key:"myr1c1"}],["path",{d:"M17 16.5h4",key:"go4c1d"}]],op=ut("film",Lge);const Ige=[["path",{d:"M12 3q1 4 4 6.5t3 5.5a1 1 0 0 1-14 0 5 5 0 0 1 1-3 1 1 0 0 0 5 0c0-2-1.5-3-1.5-5q0-2 2.5-4",key:"1slcih"}]],qu=ut("flame",Ige);const Oge=[["circle",{cx:"15",cy:"19",r:"2",key:"u2pros"}],["path",{d:"M20.9 19.8A2 2 0 0 0 22 18V8a2 2 0 0 0-2-2h-7.9a2 2 0 0 1-1.69-.9L9.6 3.9A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13a2 2 0 0 0 2 2h5.1",key:"1jj40k"}],["path",{d:"M15 11v-1",key:"cntcp"}],["path",{d:"M15 17v-2",key:"1279jj"}]],zge=ut("folder-archive",Oge);const Uge=[["path",{d:"M4 20h16a2 2 0 0 0 2-2V8a2 2 0 0 0-2-2h-7.93a2 2 0 0 1-1.66-.9l-.82-1.2A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13c0 1.1.9 2 2 2Z",key:"1fr9dc"}],["path",{d:"M8 10v4",key:"tgpxqk"}],["path",{d:"M12 10v2",key:"hh53o1"}],["path",{d:"M16 10v6",key:"1d6xys"}]],$s=ut("folder-kanban",Uge);const Bge=[["path",{d:"m6 14 1.5-2.9A2 2 0 0 1 9.24 10H20a2 2 0 0 1 1.94 2.5l-1.54 6a2 2 0 0 1-1.95 1.5H4a2 2 0 0 1-2-2V5a2 2 0 0 1 2-2h3.9a2 2 0 0 1 1.69.9l.81 1.2a2 2 0 0 0 1.67.9H18a2 2 0 0 1 2 2v2",key:"usdka0"}]],fl=ut("folder-open",Bge);const Hge=[["path",{d:"M12 10v6",key:"1bos4e"}],["path",{d:"M9 13h6",key:"1uhe8q"}],["path",{d:"M20 20a2 2 0 0 0 2-2V8a2 2 0 0 0-2-2h-7.9a2 2 0 0 1-1.69-.9L9.6 3.9A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13a2 2 0 0 0 2 2Z",key:"1kt360"}]],qge=ut("folder-plus",Hge);const $ge=[["path",{d:"M2 9.35V5a2 2 0 0 1 2-2h3.9a2 2 0 0 1 1.69.9l.81 1.2a2 2 0 0 0 1.67.9H20a2 2 0 0 1 2 2v10a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2v-3a2 2 0 0 1 2-2h7",key:"y8kt7d"}],["path",{d:"m8 16 3-3-3-3",key:"rlqrt1"}]],AN=ut("folder-symlink",$ge);const Vge=[["path",{d:"M20 10a1 1 0 0 0 1-1V6a1 1 0 0 0-1-1h-2.5a1 1 0 0 1-.8-.4l-.9-1.2A1 1 0 0 0 15 3h-2a1 1 0 0 0-1 1v5a1 1 0 0 0 1 1Z",key:"hod4my"}],["path",{d:"M20 21a1 1 0 0 0 1-1v-3a1 1 0 0 0-1-1h-2.9a1 1 0 0 1-.88-.55l-.42-.85a1 1 0 0 0-.92-.6H13a1 1 0 0 0-1 1v5a1 1 0 0 0 1 1Z",key:"w4yl2u"}],["path",{d:"M3 5a2 2 0 0 0 2 2h3",key:"f2jnh7"}],["path",{d:"M3 3v13a2 2 0 0 0 2 2h3",key:"k8epm1"}]],Gge=ut("folder-tree",Vge);const Wge=[["path",{d:"M20 20a2 2 0 0 0 2-2V8a2 2 0 0 0-2-2h-7.9a2 2 0 0 1-1.69-.9L9.6 3.9A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13a2 2 0 0 0 2 2Z",key:"1kt360"}]],iJ=ut("folder",Wge);const Kge=[["path",{d:"M3 7V5a2 2 0 0 1 2-2h2",key:"aa7l1z"}],["path",{d:"M17 3h2a2 2 0 0 1 2 2v2",key:"4qcy5o"}],["path",{d:"M21 17v2a2 2 0 0 1-2 2h-2",key:"6vwrx8"}],["path",{d:"M7 21H5a2 2 0 0 1-2-2v-2",key:"ioqczr"}],["rect",{width:"10",height:"8",x:"7",y:"8",rx:"1",key:"vys8me"}]],Xge=ut("fullscreen",Kge);const Yge=[["path",{d:"M10 20a1 1 0 0 0 .553.895l2 1A1 1 0 0 0 14 21v-7a2 2 0 0 1 .517-1.341L21.74 4.67A1 1 0 0 0 21 3H3a1 1 0 0 0-.742 1.67l7.225 7.989A2 2 0 0 1 10 14z",key:"sc7q7i"}]],ZP=ut("funnel",Yge);const Qge=[["path",{d:"m12 14 4-4",key:"9kzdfg"}],["path",{d:"M3.34 19a10 10 0 1 1 17.32 0",key:"19p75a"}]],aS=ut("gauge",Qge);const Jge=[["rect",{x:"3",y:"8",width:"18",height:"4",rx:"1",key:"bkv52"}],["path",{d:"M12 8v13",key:"1c76mn"}],["path",{d:"M19 12v7a2 2 0 0 1-2 2H7a2 2 0 0 1-2-2v-7",key:"6wjy6b"}],["path",{d:"M7.5 8a2.5 2.5 0 0 1 0-5A4.8 8 0 0 1 12 8a4.8 8 0 0 1 4.5-5 2.5 2.5 0 0 1 0 5",key:"1ihvrl"}]],Zge=ut("gift",Jge);const ebe=[["line",{x1:"6",x2:"6",y1:"3",y2:"15",key:"17qcm7"}],["circle",{cx:"18",cy:"6",r:"3",key:"1h7g24"}],["circle",{cx:"6",cy:"18",r:"3",key:"fqmcym"}],["path",{d:"M18 9a9 9 0 0 1-9 9",key:"n2h4wq"}]],sJ=ut("git-branch",ebe);const tbe=[["circle",{cx:"18",cy:"18",r:"3",key:"1xkwt0"}],["circle",{cx:"6",cy:"6",r:"3",key:"1lh9wr"}],["path",{d:"M13 6h3a2 2 0 0 1 2 2v7",key:"1yeb86"}],["path",{d:"M11 18H8a2 2 0 0 1-2-2V9",key:"19pyzm"}]],Rx=ut("git-compare",tbe);const nbe=[["path",{d:"M15 22v-4a4.8 4.8 0 0 0-1-3.5c3 0 6-2 6-5.5.08-1.25-.27-2.48-1-3.5.28-1.15.28-2.35 0-3.5 0 0-1 0-3 1.5-2.64-.5-5.36-.5-8 0C6 2 5 2 5 2c-.3 1.15-.3 2.35 0 3.5A5.403 5.403 0 0 0 4 9c0 3.5 3 5.5 6 5.5-.39.49-.68 1.05-.85 1.65-.17.6-.22 1.23-.15 1.85v4",key:"tonef"}],["path",{d:"M9 18c-4.51 2-5-2-7-2",key:"9comsn"}]],xF=ut("github",nbe);const rbe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["path",{d:"M12 2a14.5 14.5 0 0 0 0 20 14.5 14.5 0 0 0 0-20",key:"13o1zl"}],["path",{d:"M2 12h20",key:"9i4pu4"}]],qs=ut("globe",rbe);const abe=[["circle",{cx:"9",cy:"12",r:"1",key:"1vctgf"}],["circle",{cx:"9",cy:"5",r:"1",key:"hp0tcf"}],["circle",{cx:"9",cy:"19",r:"1",key:"fkjjf6"}],["circle",{cx:"15",cy:"12",r:"1",key:"1tmaij"}],["circle",{cx:"15",cy:"5",r:"1",key:"19l28e"}],["circle",{cx:"15",cy:"19",r:"1",key:"f4zoj3"}]],lp=ut("grip-vertical",abe);const ibe=[["path",{d:"M3 7V5c0-1.1.9-2 2-2h2",key:"adw53z"}],["path",{d:"M17 3h2c1.1 0 2 .9 2 2v2",key:"an4l38"}],["path",{d:"M21 17v2c0 1.1-.9 2-2 2h-2",key:"144t0e"}],["path",{d:"M7 21H5c-1.1 0-2-.9-2-2v-2",key:"rtnfgi"}],["rect",{width:"7",height:"5",x:"7",y:"7",rx:"1",key:"1eyiv7"}],["rect",{width:"7",height:"5",x:"10",y:"12",rx:"1",key:"1qlmkx"}]],sbe=ut("group",ibe);const obe=[["path",{d:"M18 11V6a2 2 0 0 0-2-2a2 2 0 0 0-2 2",key:"1fvzgz"}],["path",{d:"M14 10V4a2 2 0 0 0-2-2a2 2 0 0 0-2 2v2",key:"1kc0my"}],["path",{d:"M10 10.5V6a2 2 0 0 0-2-2a2 2 0 0 0-2 2v8",key:"10h0bg"}],["path",{d:"M18 8a2 2 0 1 1 4 0v6a8 8 0 0 1-8 8h-2c-2.8 0-4.5-.86-5.99-2.34l-3.6-3.6a2 2 0 0 1 2.83-2.82L7 15",key:"1s1gnw"}]],oJ=ut("hand",obe);const lbe=[["line",{x1:"22",x2:"2",y1:"12",y2:"12",key:"1y58io"}],["path",{d:"M5.45 5.11 2 12v6a2 2 0 0 0 2 2h16a2 2 0 0 0 2-2v-6l-3.45-6.89A2 2 0 0 0 16.76 4H7.24a2 2 0 0 0-1.79 1.11z",key:"oot6mr"}],["line",{x1:"6",x2:"6.01",y1:"16",y2:"16",key:"sgf278"}],["line",{x1:"10",x2:"10.01",y1:"16",y2:"16",key:"1l4acy"}]],Vg=ut("hard-drive",lbe);const cbe=[["line",{x1:"4",x2:"20",y1:"9",y2:"9",key:"4lhtct"}],["line",{x1:"4",x2:"20",y1:"15",y2:"15",key:"vyu0kd"}],["line",{x1:"10",x2:"8",y1:"3",y2:"21",key:"1ggp8o"}],["line",{x1:"16",x2:"14",y1:"3",y2:"21",key:"weycgp"}]],dbe=ut("hash",cbe);const ube=[["path",{d:"M3 14h3a2 2 0 0 1 2 2v3a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-7a9 9 0 0 1 18 0v7a2 2 0 0 1-2 2h-1a2 2 0 0 1-2-2v-3a2 2 0 0 1 2-2h3",key:"1xhozi"}]],mbe=ut("headphones",ube);const hbe=[["path",{d:"M2 9.5a5.5 5.5 0 0 1 9.591-3.676.56.56 0 0 0 .818 0A5.49 5.49 0 0 1 22 9.5c0 2.29-1.5 4-3 5.5l-5.492 5.313a2 2 0 0 1-3 .019L5 15c-1.5-1.5-3-3.2-3-5.5",key:"mvr1a0"}]],pbe=ut("heart",hbe);const fbe=[["path",{d:"M3 12a9 9 0 1 0 9-9 9.75 9.75 0 0 0-6.74 2.74L3 8",key:"1357e3"}],["path",{d:"M3 3v5h5",key:"1xhq8a"}],["path",{d:"M12 7v5l4 2",key:"1fdv2h"}]],dw=ut("history",fbe);const gbe=[["path",{d:"M15 21v-8a1 1 0 0 0-1-1h-4a1 1 0 0 0-1 1v8",key:"5wwlr5"}],["path",{d:"M3 10a2 2 0 0 1 .709-1.528l7-6a2 2 0 0 1 2.582 0l7 6A2 2 0 0 1 21 10v9a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z",key:"r6nss1"}]],iS=ut("house",gbe);const bbe=[["rect",{width:"18",height:"18",x:"3",y:"3",rx:"2",ry:"2",key:"1m3agn"}],["circle",{cx:"9",cy:"9",r:"2",key:"af1f0g"}],["path",{d:"m21 15-3.086-3.086a2 2 0 0 0-2.828 0L6 21",key:"1xmnt7"}]],Bd=ut("image",bbe);const xbe=[["path",{d:"m22 11-1.296-1.296a2.4 2.4 0 0 0-3.408 0L11 16",key:"9kzy35"}],["path",{d:"M4 8a2 2 0 0 0-2 2v10a2 2 0 0 0 2 2h10a2 2 0 0 0 2-2",key:"1t0f0t"}],["circle",{cx:"13",cy:"7",r:"1",fill:"currentColor",key:"1obus6"}],["rect",{x:"8",y:"2",width:"14",height:"14",rx:"2",key:"1gvhby"}]],ybe=ut("images",xbe);const vbe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["path",{d:"M12 16v-4",key:"1dtifu"}],["path",{d:"M12 8h.01",key:"e9boi3"}]],Cs=ut("info",vbe);const wbe=[["line",{x1:"19",x2:"10",y1:"4",y2:"4",key:"15jd3p"}],["line",{x1:"14",x2:"5",y1:"20",y2:"20",key:"bu0au3"}],["line",{x1:"15",x2:"9",y1:"4",y2:"20",key:"uljnxc"}]],Sbe=ut("italic",wbe);const _be=[["path",{d:"m15.5 7.5 2.3 2.3a1 1 0 0 0 1.4 0l2.1-2.1a1 1 0 0 0 0-1.4L19 4",key:"g0fldk"}],["path",{d:"m21 2-9.6 9.6",key:"1j0ho8"}],["circle",{cx:"7.5",cy:"15.5",r:"5.5",key:"yqb3hr"}]],ao=ut("key",_be);const kbe=[["path",{d:"M10 8h.01",key:"1r9ogq"}],["path",{d:"M12 12h.01",key:"1mp3jc"}],["path",{d:"M14 8h.01",key:"1primd"}],["path",{d:"M16 12h.01",key:"1l6xoz"}],["path",{d:"M18 8h.01",key:"emo2bl"}],["path",{d:"M6 8h.01",key:"x9i8wu"}],["path",{d:"M7 16h10",key:"wp8him"}],["path",{d:"M8 12h.01",key:"czm47f"}],["rect",{width:"20",height:"16",x:"2",y:"4",rx:"2",key:"18n3k1"}]],yF=ut("keyboard",kbe);const Nbe=[["path",{d:"M12.83 2.18a2 2 0 0 0-1.66 0L2.6 6.08a1 1 0 0 0 0 1.83l8.58 3.91a2 2 0 0 0 1.66 0l8.58-3.9a1 1 0 0 0 0-1.83z",key:"zw3jo"}],["path",{d:"M2 12a1 1 0 0 0 .58.91l8.6 3.91a2 2 0 0 0 1.65 0l8.58-3.9A1 1 0 0 0 22 12",key:"1wduqc"}],["path",{d:"M2 17a1 1 0 0 0 .58.91l8.6 3.91a2 2 0 0 0 1.65 0l8.58-3.9A1 1 0 0 0 22 17",key:"kqbvx6"}]],ia=ut("layers",Nbe);const Cbe=[["rect",{width:"7",height:"7",x:"3",y:"3",rx:"1",key:"1g98yp"}],["rect",{width:"7",height:"7",x:"14",y:"3",rx:"1",key:"6d4xhi"}],["rect",{width:"7",height:"7",x:"14",y:"14",rx:"1",key:"nxv5o0"}],["rect",{width:"7",height:"7",x:"3",y:"14",rx:"1",key:"1bb6yr"}]],sS=ut("layout-grid",Cbe);const Pbe=[["path",{d:"M9 17H7A5 5 0 0 1 7 7",key:"10o201"}],["path",{d:"M15 7h2a5 5 0 0 1 4 8",key:"1d3206"}],["line",{x1:"8",x2:"12",y1:"12",y2:"12",key:"rvw6j4"}],["line",{x1:"2",x2:"22",y1:"2",y2:"22",key:"a6p6uj"}]],Tbe=ut("link-2-off",Pbe);const Abe=[["path",{d:"M9 17H7A5 5 0 0 1 7 7h2",key:"8i5ue5"}],["path",{d:"M15 7h2a5 5 0 1 1 0 10h-2",key:"1b9ql8"}],["line",{x1:"8",x2:"16",y1:"12",y2:"12",key:"1jonct"}]],lm=ut("link-2",Abe);const jbe=[["path",{d:"M10 13a5 5 0 0 0 7.54.54l3-3a5 5 0 0 0-7.07-7.07l-1.72 1.71",key:"1cjeqo"}],["path",{d:"M14 11a5 5 0 0 0-7.54-.54l-3 3a5 5 0 0 0 7.07 7.07l1.71-1.71",key:"19qd67"}]],Ty=ut("link",jbe);const Mbe=[["path",{d:"M11 5h10",key:"1cz7ny"}],["path",{d:"M11 12h10",key:"1438ji"}],["path",{d:"M11 19h10",key:"11t30w"}],["path",{d:"M4 4h1v5",key:"10yrso"}],["path",{d:"M4 9h2",key:"r1h2o0"}],["path",{d:"M6.5 20H3.4c0-1 2.6-1.925 2.6-3.5a1.5 1.5 0 0 0-2.6-1.02",key:"xtkcd5"}]],jN=ut("list-ordered",Mbe);const Ebe=[["path",{d:"M13 5h8",key:"a7qcls"}],["path",{d:"M13 12h8",key:"h98zly"}],["path",{d:"M13 19h8",key:"c3s6r1"}],["path",{d:"m3 17 2 2 4-4",key:"1jhpwq"}],["rect",{x:"3",y:"4",width:"6",height:"6",rx:"1",key:"cif1o7"}]],vF=ut("list-todo",Ebe);const Dbe=[["path",{d:"M3 5h.01",key:"18ugdj"}],["path",{d:"M3 12h.01",key:"nlz23k"}],["path",{d:"M3 19h.01",key:"noohij"}],["path",{d:"M8 5h13",key:"1pao27"}],["path",{d:"M8 12h13",key:"1za7za"}],["path",{d:"M8 19h13",key:"m83p4d"}]],oS=ut("list",Dbe);const Fbe=[["path",{d:"M21 12a9 9 0 1 1-6.219-8.56",key:"13zald"}]],mt=ut("loader-circle",Fbe);const Rbe=[["rect",{width:"18",height:"11",x:"3",y:"11",rx:"2",ry:"2",key:"1w4ew1"}],["path",{d:"M7 11V7a5 5 0 0 1 9.9-1",key:"1mm8w8"}]],D0=ut("lock-open",Rbe);const Lbe=[["rect",{width:"18",height:"11",x:"3",y:"11",rx:"2",ry:"2",key:"1w4ew1"}],["path",{d:"M7 11V7a5 5 0 0 1 10 0v4",key:"fwvmzm"}]],Nd=ut("lock",Lbe);const Ibe=[["path",{d:"m10 17 5-5-5-5",key:"1bsop3"}],["path",{d:"M15 12H3",key:"6jk70r"}],["path",{d:"M15 3h4a2 2 0 0 1 2 2v14a2 2 0 0 1-2 2h-4",key:"u53s6r"}]],VH=ut("log-in",Ibe);const Obe=[["path",{d:"m16 17 5-5-5-5",key:"1bji2h"}],["path",{d:"M21 12H9",key:"dn1m92"}],["path",{d:"M9 21H5a2 2 0 0 1-2-2V5a2 2 0 0 1 2-2h4",key:"1uf3rs"}]],wF=ut("log-out",Obe);const zbe=[["path",{d:"m22 7-8.991 5.727a2 2 0 0 1-2.009 0L2 7",key:"132q7q"}],["rect",{x:"2",y:"4",width:"20",height:"16",rx:"2",key:"izxlao"}]],xm=ut("mail",zbe);const Ube=[["path",{d:"M14.106 5.553a2 2 0 0 0 1.788 0l3.659-1.83A1 1 0 0 1 21 4.619v12.764a1 1 0 0 1-.553.894l-4.553 2.277a2 2 0 0 1-1.788 0l-4.212-2.106a2 2 0 0 0-1.788 0l-3.659 1.83A1 1 0 0 1 3 19.381V6.618a1 1 0 0 1 .553-.894l4.553-2.277a2 2 0 0 1 1.788 0z",key:"169xi5"}],["path",{d:"M15 5.764v15",key:"1pn4in"}],["path",{d:"M9 3.236v15",key:"1uimfh"}]],Bbe=ut("map",Ube);const Hbe=[["path",{d:"M15 3h6v6",key:"1q9fwt"}],["path",{d:"m21 3-7 7",key:"1l2asr"}],["path",{d:"m3 21 7-7",key:"tjx5ai"}],["path",{d:"M9 21H3v-6",key:"wtvkvv"}]],eT=ut("maximize-2",Hbe);const qbe=[["path",{d:"M8 3H5a2 2 0 0 0-2 2v3",key:"1dcmit"}],["path",{d:"M21 8V5a2 2 0 0 0-2-2h-3",key:"1e4gt3"}],["path",{d:"M3 16v3a2 2 0 0 0 2 2h3",key:"wsl5sc"}],["path",{d:"M16 21h3a2 2 0 0 0 2-2v-3",key:"18trek"}]],$be=ut("maximize",qbe);const Vbe=[["path",{d:"M6 19v-3",key:"1nvgqn"}],["path",{d:"M10 19v-3",key:"iu8nkm"}],["path",{d:"M14 19v-3",key:"kcehxu"}],["path",{d:"M18 19v-3",key:"1vh91z"}],["path",{d:"M8 11V9",key:"63erz4"}],["path",{d:"M16 11V9",key:"fru6f3"}],["path",{d:"M12 11V9",key:"ha00sb"}],["path",{d:"M2 15h20",key:"16ne18"}],["path",{d:"M2 7a2 2 0 0 1 2-2h16a2 2 0 0 1 2 2v1.1a2 2 0 0 0 0 3.837V17a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2v-5.1a2 2 0 0 0 0-3.837Z",key:"lhddv3"}]],Gbe=ut("memory-stick",Vbe);const Wbe=[["path",{d:"M4 5h16",key:"1tepv9"}],["path",{d:"M4 12h16",key:"1lakjw"}],["path",{d:"M4 19h16",key:"1djgab"}]],Kbe=ut("menu",Wbe);const Xbe=[["path",{d:"m14 10 7-7",key:"oa77jy"}],["path",{d:"M20 10h-6V4",key:"mjg0md"}],["path",{d:"m3 21 7-7",key:"tjx5ai"}],["path",{d:"M4 14h6v6",key:"rmj7iw"}]],JI=ut("minimize-2",Xbe);const Ybe=[["path",{d:"M8 3v3a2 2 0 0 1-2 2H3",key:"hohbtr"}],["path",{d:"M21 8h-3a2 2 0 0 1-2-2V3",key:"5jw1f3"}],["path",{d:"M3 16h3a2 2 0 0 1 2 2v3",key:"198tvr"}],["path",{d:"M16 21v-3a2 2 0 0 1 2-2h3",key:"ph8mxp"}]],lJ=ut("minimize",Ybe);const Qbe=[["path",{d:"M5 12h14",key:"1ays0h"}]],MN=ut("minus",Qbe);const Jbe=[["rect",{width:"20",height:"14",x:"2",y:"3",rx:"2",key:"48i651"}],["line",{x1:"8",x2:"16",y1:"21",y2:"21",key:"1svkeh"}],["line",{x1:"12",x2:"12",y1:"17",y2:"21",key:"vw1qmm"}]],ZI=ut("monitor",Jbe);const Zbe=[["path",{d:"M20.985 12.486a9 9 0 1 1-9.473-9.472c.405-.022.617.46.402.803a6 6 0 0 0 8.268 8.268c.344-.215.825-.004.803.401",key:"kfwtm"}]],EN=ut("moon",Zbe);const exe=[["path",{d:"M18 8L22 12L18 16",key:"1r0oui"}],["path",{d:"M2 12H22",key:"1m8cig"}]],txe=ut("move-right",exe);const nxe=[["path",{d:"M12 2v20",key:"t6zp3m"}],["path",{d:"m8 18 4 4 4-4",key:"bh5tu3"}],["path",{d:"m8 6 4-4 4 4",key:"ybng9g"}]],rxe=ut("move-vertical",nxe);const axe=[["path",{d:"M9 18V5l12-2v13",key:"1jmyc2"}],["circle",{cx:"6",cy:"18",r:"3",key:"fqmcym"}],["circle",{cx:"18",cy:"16",r:"3",key:"1hluhg"}]],SF=ut("music",axe);const ixe=[["path",{d:"M11 21.73a2 2 0 0 0 2 0l7-4A2 2 0 0 0 21 16V8a2 2 0 0 0-1-1.73l-7-4a2 2 0 0 0-2 0l-7 4A2 2 0 0 0 3 8v8a2 2 0 0 0 1 1.73z",key:"1a0edw"}],["path",{d:"M12 22V12",key:"d0xqtd"}],["polyline",{points:"3.29 7 12 12 20.71 7",key:"ousv84"}],["path",{d:"m7.5 4.27 9 5.15",key:"1c824w"}]],Za=ut("package",ixe);const sxe=[["path",{d:"M12 22a1 1 0 0 1 0-20 10 9 0 0 1 10 9 5 5 0 0 1-5 5h-2.25a1.75 1.75 0 0 0-1.4 2.8l.3.4a1.75 1.75 0 0 1-1.4 2.8z",key:"e79jfc"}],["circle",{cx:"13.5",cy:"6.5",r:".5",fill:"currentColor",key:"1okk4w"}],["circle",{cx:"17.5",cy:"10.5",r:".5",fill:"currentColor",key:"f64h9f"}],["circle",{cx:"6.5",cy:"12.5",r:".5",fill:"currentColor",key:"qy21gx"}],["circle",{cx:"8.5",cy:"7.5",r:".5",fill:"currentColor",key:"fotxhn"}]],lS=ut("palette",sxe);const oxe=[["rect",{x:"14",y:"3",width:"5",height:"18",rx:"1",key:"kaeet6"}],["rect",{x:"5",y:"3",width:"5",height:"18",rx:"1",key:"1wsw3u"}]],cS=ut("pause",oxe);const lxe=[["path",{d:"M13 21h8",key:"1jsn5i"}],["path",{d:"M21.174 6.812a1 1 0 0 0-3.986-3.987L3.842 16.174a2 2 0 0 0-.5.83l-1.321 4.352a.5.5 0 0 0 .623.622l4.353-1.32a2 2 0 0 0 .83-.497z",key:"1a8usu"}]],fg=ut("pen-line",lxe);const cxe=[["path",{d:"M21.174 6.812a1 1 0 0 0-3.986-3.987L3.842 16.174a2 2 0 0 0-.5.83l-1.321 4.352a.5.5 0 0 0 .623.622l4.353-1.32a2 2 0 0 0 .83-.497z",key:"1a8usu"}]],Ju=ut("pen",cxe);const dxe=[["path",{d:"M21.174 6.812a1 1 0 0 0-3.986-3.987L3.842 16.174a2 2 0 0 0-.5.83l-1.321 4.352a.5.5 0 0 0 .623.622l4.353-1.32a2 2 0 0 0 .83-.497z",key:"1a8usu"}],["path",{d:"m15 5 4 4",key:"1mk7zo"}]],li=ut("pencil",dxe);const uxe=[["path",{d:"M13.832 16.568a1 1 0 0 0 1.213-.303l.355-.465A2 2 0 0 1 17 15h3a2 2 0 0 1 2 2v3a2 2 0 0 1-2 2A18 18 0 0 1 2 4a2 2 0 0 1 2-2h3a2 2 0 0 1 2 2v3a2 2 0 0 1-.8 1.6l-.468.351a1 1 0 0 0-.292 1.233 14 14 0 0 0 6.392 6.384",key:"9njp5v"}]],mxe=ut("phone",uxe);const hxe=[["path",{d:"M5 5a2 2 0 0 1 3.008-1.728l11.997 6.998a2 2 0 0 1 .003 3.458l-12 7A2 2 0 0 1 5 19z",key:"10ikf1"}]],rs=ut("play",hxe);const pxe=[["path",{d:"M12 22v-5",key:"1ega77"}],["path",{d:"M9 8V2",key:"14iosj"}],["path",{d:"M15 8V2",key:"18g5xt"}],["path",{d:"M18 8v5a4 4 0 0 1-4 4h-4a4 4 0 0 1-4-4V8Z",key:"osxo6l"}]],tc=ut("plug",pxe);const fxe=[["path",{d:"M5 12h14",key:"1ays0h"}],["path",{d:"M12 5v14",key:"s699le"}]],nr=ut("plus",fxe);const gxe=[["path",{d:"M18.36 6.64A9 9 0 0 1 20.77 15",key:"dxknvb"}],["path",{d:"M6.16 6.16a9 9 0 1 0 12.68 12.68",key:"1x7qb5"}],["path",{d:"M12 2v4",key:"3427ic"}],["path",{d:"m2 2 20 20",key:"1ooewy"}]],dS=ut("power-off",gxe);const bxe=[["path",{d:"M12 2v10",key:"mnfbl"}],["path",{d:"M18.4 6.6a9 9 0 1 1-12.77.04",key:"obofu9"}]],Jd=ut("power",bxe);const xxe=[["path",{d:"M6 18H4a2 2 0 0 1-2-2v-5a2 2 0 0 1 2-2h16a2 2 0 0 1 2 2v5a2 2 0 0 1-2 2h-2",key:"143wyd"}],["path",{d:"M6 9V3a1 1 0 0 1 1-1h10a1 1 0 0 1 1 1v6",key:"1itne7"}],["rect",{x:"6",y:"14",width:"12",height:"8",rx:"1",key:"1ue0tg"}]],Mr=ut("printer",xxe);const yxe=[["rect",{width:"5",height:"5",x:"3",y:"3",rx:"1",key:"1tu5fj"}],["rect",{width:"5",height:"5",x:"16",y:"3",rx:"1",key:"1v8r4q"}],["rect",{width:"5",height:"5",x:"3",y:"16",rx:"1",key:"1x03jg"}],["path",{d:"M21 16h-3a2 2 0 0 0-2 2v3",key:"177gqh"}],["path",{d:"M21 21v.01",key:"ents32"}],["path",{d:"M12 7v3a2 2 0 0 1-2 2H7",key:"8crl2c"}],["path",{d:"M3 12h.01",key:"nlz23k"}],["path",{d:"M12 3h.01",key:"n36tog"}],["path",{d:"M12 16v.01",key:"133mhm"}],["path",{d:"M16 12h1",key:"1slzba"}],["path",{d:"M21 12v.01",key:"1lwtk9"}],["path",{d:"M12 21v-1",key:"1880an"}]],cJ=ut("qr-code",yxe);const vxe=[["path",{d:"M16.247 7.761a6 6 0 0 1 0 8.478",key:"1fwjs5"}],["path",{d:"M19.075 4.933a10 10 0 0 1 0 14.134",key:"ehdyv1"}],["path",{d:"M4.925 19.067a10 10 0 0 1 0-14.134",key:"1q22gi"}],["path",{d:"M7.753 16.239a6 6 0 0 1 0-8.478",key:"r2q7qm"}],["circle",{cx:"12",cy:"12",r:"2",key:"1c9p78"}]],eO=ut("radio",vxe);const wxe=[["path",{d:"M3 12a9 9 0 0 1 9-9 9.75 9.75 0 0 1 6.74 2.74L21 8",key:"v9h5vc"}],["path",{d:"M21 3v5h-5",key:"1q7to0"}],["path",{d:"M21 12a9 9 0 0 1-9 9 9.75 9.75 0 0 1-6.74-2.74L3 16",key:"3uifl3"}],["path",{d:"M8 16H3v5",key:"1cv678"}]],sr=ut("refresh-cw",wxe);const Sxe=[["path",{d:"M3 12a9 9 0 1 0 9-9 9.75 9.75 0 0 0-6.74 2.74L3 8",key:"1357e3"}],["path",{d:"M3 3v5h5",key:"1xhq8a"}]],Ts=ut("rotate-ccw",Sxe);const _xe=[["path",{d:"M21 12a9 9 0 1 1-9-9c2.52 0 4.93 1 6.74 2.74L21 8",key:"1p45f6"}],["path",{d:"M21 3v5h-5",key:"1q7to0"}]],uw=ut("rotate-cw",_xe);const kxe=[["path",{d:"M21.3 15.3a2.4 2.4 0 0 1 0 3.4l-2.6 2.6a2.4 2.4 0 0 1-3.4 0L2.7 8.7a2.41 2.41 0 0 1 0-3.4l2.6-2.6a2.41 2.41 0 0 1 3.4 0Z",key:"icamh8"}],["path",{d:"m14.5 12.5 2-2",key:"inckbg"}],["path",{d:"m11.5 9.5 2-2",key:"fmmyf7"}],["path",{d:"m8.5 6.5 2-2",key:"vc6u1g"}],["path",{d:"m17.5 15.5 2-2",key:"wo5hmg"}]],Nxe=ut("ruler",kxe);const Cxe=[["path",{d:"M15.2 3a2 2 0 0 1 1.4.6l3.8 3.8a2 2 0 0 1 .6 1.4V19a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V5a2 2 0 0 1 2-2z",key:"1c8476"}],["path",{d:"M17 21v-7a1 1 0 0 0-1-1H8a1 1 0 0 0-1 1v7",key:"1ydtos"}],["path",{d:"M7 3v4a1 1 0 0 0 1 1h7",key:"t51u73"}]],Ji=ut("save",Cxe);const Pxe=[["path",{d:"M12 3v18",key:"108xh3"}],["path",{d:"m19 8 3 8a5 5 0 0 1-6 0zV7",key:"zcdpyk"}],["path",{d:"M3 7h1a17 17 0 0 0 8-2 17 17 0 0 0 8 2h1",key:"1yorad"}],["path",{d:"m5 8 3 8a5 5 0 0 1-6 0zV7",key:"eua70x"}],["path",{d:"M7 21h10",key:"1b0cd5"}]],dJ=ut("scale",Pxe);const Txe=[["path",{d:"M3 7V5a2 2 0 0 1 2-2h2",key:"aa7l1z"}],["path",{d:"M17 3h2a2 2 0 0 1 2 2v2",key:"4qcy5o"}],["path",{d:"M21 17v2a2 2 0 0 1-2 2h-2",key:"6vwrx8"}],["path",{d:"M7 21H5a2 2 0 0 1-2-2v-2",key:"ioqczr"}],["circle",{cx:"12",cy:"12",r:"1",key:"41hilf"}],["path",{d:"M18.944 12.33a1 1 0 0 0 0-.66 7.5 7.5 0 0 0-13.888 0 1 1 0 0 0 0 .66 7.5 7.5 0 0 0 13.888 0",key:"11ak4c"}]],uJ=ut("scan-eye",Txe);const Axe=[["path",{d:"M3 7V5a2 2 0 0 1 2-2h2",key:"aa7l1z"}],["path",{d:"M17 3h2a2 2 0 0 1 2 2v2",key:"4qcy5o"}],["path",{d:"M21 17v2a2 2 0 0 1-2 2h-2",key:"6vwrx8"}],["path",{d:"M7 21H5a2 2 0 0 1-2-2v-2",key:"ioqczr"}],["circle",{cx:"12",cy:"12",r:"3",key:"1v7zrd"}],["path",{d:"m16 16-1.9-1.9",key:"1dq9hf"}]],DN=ut("scan-search",Axe);const jxe=[["circle",{cx:"6",cy:"6",r:"3",key:"1lh9wr"}],["path",{d:"M8.12 8.12 12 12",key:"1alkpv"}],["path",{d:"M20 4 8.12 15.88",key:"xgtan2"}],["circle",{cx:"6",cy:"18",r:"3",key:"fqmcym"}],["path",{d:"M14.8 14.8 20 20",key:"ptml3r"}]],Mxe=ut("scissors",jxe);const Exe=[["path",{d:"m21 21-4.34-4.34",key:"14j7rj"}],["circle",{cx:"11",cy:"11",r:"8",key:"4ej97u"}]],Nr=ut("search",Exe);const Dxe=[["path",{d:"M14.536 21.686a.5.5 0 0 0 .937-.024l6.5-19a.496.496 0 0 0-.635-.635l-19 6.5a.5.5 0 0 0-.024.937l7.93 3.18a2 2 0 0 1 1.112 1.11z",key:"1ffxy3"}],["path",{d:"m21.854 2.147-10.94 10.939",key:"12cjpa"}]],uS=ut("send",Dxe);const Fxe=[["rect",{width:"20",height:"8",x:"2",y:"2",rx:"2",ry:"2",key:"ngkwjq"}],["rect",{width:"20",height:"8",x:"2",y:"14",rx:"2",ry:"2",key:"iecqi9"}],["line",{x1:"6",x2:"6.01",y1:"6",y2:"6",key:"16zg32"}],["line",{x1:"6",x2:"6.01",y1:"18",y2:"18",key:"nzw8ys"}]],Pf=ut("server",Fxe);const Rxe=[["path",{d:"M14 17H5",key:"gfn3mx"}],["path",{d:"M19 7h-9",key:"6i9tg"}],["circle",{cx:"17",cy:"17",r:"3",key:"18b49y"}],["circle",{cx:"7",cy:"7",r:"3",key:"dfmy0x"}]],Hd=ut("settings-2",Rxe);const Lxe=[["path",{d:"M9.671 4.136a2.34 2.34 0 0 1 4.659 0 2.34 2.34 0 0 0 3.319 1.915 2.34 2.34 0 0 1 2.33 4.033 2.34 2.34 0 0 0 0 3.831 2.34 2.34 0 0 1-2.33 4.033 2.34 2.34 0 0 0-3.319 1.915 2.34 2.34 0 0 1-4.659 0 2.34 2.34 0 0 0-3.32-1.915 2.34 2.34 0 0 1-2.33-4.033 2.34 2.34 0 0 0 0-3.831A2.34 2.34 0 0 1 6.35 6.051a2.34 2.34 0 0 0 3.319-1.915",key:"1i5ecw"}],["circle",{cx:"12",cy:"12",r:"3",key:"1v7zrd"}]],mS=ut("settings",Lxe);const Ixe=[["path",{d:"M20 13c0 5-3.5 7.5-7.66 8.95a1 1 0 0 1-.67-.01C7.5 20.5 4 18 4 13V6a1 1 0 0 1 1-1c2 0 4.5-1.2 6.24-2.72a1.17 1.17 0 0 1 1.52 0C14.51 3.81 17 5 19 5a1 1 0 0 1 1 1z",key:"oel41y"}],["path",{d:"M12 8v4",key:"1got3b"}],["path",{d:"M12 16h.01",key:"1drbdi"}]],Oxe=ut("shield-alert",Ixe);const zxe=[["path",{d:"M20 13c0 5-3.5 7.5-7.66 8.95a1 1 0 0 1-.67-.01C7.5 20.5 4 18 4 13V6a1 1 0 0 1 1-1c2 0 4.5-1.2 6.24-2.72a1.17 1.17 0 0 1 1.52 0C14.51 3.81 17 5 19 5a1 1 0 0 1 1 1z",key:"oel41y"}],["path",{d:"m9 12 2 2 4-4",key:"dzmm74"}]],_F=ut("shield-check",zxe);const Uxe=[["path",{d:"m2 2 20 20",key:"1ooewy"}],["path",{d:"M5 5a1 1 0 0 0-1 1v7c0 5 3.5 7.5 7.67 8.94a1 1 0 0 0 .67.01c2.35-.82 4.48-1.97 5.9-3.71",key:"1jlk70"}],["path",{d:"M9.309 3.652A12.252 12.252 0 0 0 11.24 2.28a1.17 1.17 0 0 1 1.52 0C14.51 3.81 17 5 19 5a1 1 0 0 1 1 1v7a9.784 9.784 0 0 1-.08 1.264",key:"18rp1v"}]],GH=ut("shield-off",Uxe);const Bxe=[["path",{d:"M20 13c0 5-3.5 7.5-7.66 8.95a1 1 0 0 1-.67-.01C7.5 20.5 4 18 4 13V6a1 1 0 0 1 1-1c2 0 4.5-1.2 6.24-2.72a1.17 1.17 0 0 1 1.52 0C14.51 3.81 17 5 19 5a1 1 0 0 1 1 1z",key:"oel41y"}]],Wu=ut("shield",Bxe);const Hxe=[["circle",{cx:"8",cy:"21",r:"1",key:"jimo8o"}],["circle",{cx:"19",cy:"21",r:"1",key:"13723u"}],["path",{d:"M2.05 2.05h2l2.66 12.42a2 2 0 0 0 2 1.58h9.78a2 2 0 0 0 1.95-1.57l1.65-7.43H5.12",key:"9zh506"}]],mJ=ut("shopping-cart",Hxe);const qxe=[["path",{d:"M2 20h.01",key:"4haj6o"}],["path",{d:"M7 20v-4",key:"j294jx"}],["path",{d:"M12 20v-8",key:"i3yub9"}],["path",{d:"M17 20V8",key:"1tkaf5"}],["path",{d:"M22 4v16",key:"sih9yq"}]],hJ=ut("signal",qxe);const $xe=[["path",{d:"M17.971 4.285A2 2 0 0 1 21 6v12a2 2 0 0 1-3.029 1.715l-9.997-5.998a2 2 0 0 1-.003-3.432z",key:"15892j"}],["path",{d:"M3 20V4",key:"1ptbpl"}]],Vxe=ut("skip-back",$xe);const Gxe=[["path",{d:"M21 4v16",key:"7j8fe9"}],["path",{d:"M6.029 4.285A2 2 0 0 0 3 6v12a2 2 0 0 0 3.029 1.715l9.997-5.998a2 2 0 0 0 .003-3.432z",key:"zs4d6"}]],tT=ut("skip-forward",Gxe);const Wxe=[["path",{d:"M10 8h4",key:"1sr2af"}],["path",{d:"M12 21v-9",key:"17s77i"}],["path",{d:"M12 8V3",key:"13r4qs"}],["path",{d:"M17 16h4",key:"h1uq16"}],["path",{d:"M19 12V3",key:"o1uvq1"}],["path",{d:"M19 21v-5",key:"qua636"}],["path",{d:"M3 14h4",key:"bcjad9"}],["path",{d:"M5 10V3",key:"cb8scm"}],["path",{d:"M5 21v-7",key:"1w1uti"}]],WH=ut("sliders-vertical",Wxe);const Kxe=[["rect",{width:"14",height:"20",x:"5",y:"2",rx:"2",ry:"2",key:"1yt0o3"}],["path",{d:"M12 18h.01",key:"mhygvu"}]],kF=ut("smartphone",Kxe);const Xxe=[["path",{d:"M2 13a6 6 0 1 0 12 0 4 4 0 1 0-8 0 2 2 0 0 0 4 0",key:"hneq2s"}],["circle",{cx:"10",cy:"13",r:"8",key:"194lz3"}],["path",{d:"M2 21h12c4.4 0 8-3.6 8-8V7a2 2 0 1 0-4 0v6",key:"ixqyt7"}],["path",{d:"M18 3 19.1 5.2",key:"9tjm43"}],["path",{d:"M22 3 20.9 5.2",key:"j3odrs"}]],Yxe=ut("snail",Xxe);const Qxe=[["path",{d:"m10 20-1.25-2.5L6 18",key:"18frcb"}],["path",{d:"M10 4 8.75 6.5 6 6",key:"7mghy3"}],["path",{d:"m14 20 1.25-2.5L18 18",key:"1chtki"}],["path",{d:"m14 4 1.25 2.5L18 6",key:"1b4wsy"}],["path",{d:"m17 21-3-6h-4",key:"15hhxa"}],["path",{d:"m17 3-3 6 1.5 3",key:"11697g"}],["path",{d:"M2 12h6.5L10 9",key:"kv9z4n"}],["path",{d:"m20 10-1.5 2 1.5 2",key:"1swlpi"}],["path",{d:"M22 12h-6.5L14 15",key:"1mxi28"}],["path",{d:"m4 10 1.5 2L4 14",key:"k9enpj"}],["path",{d:"m7 21 3-6-1.5-3",key:"j8hb9u"}],["path",{d:"m7 3 3 6h4",key:"1otusx"}]],KH=ut("snowflake",Qxe);const Jxe=[["path",{d:"M11.017 2.814a1 1 0 0 1 1.966 0l1.051 5.558a2 2 0 0 0 1.594 1.594l5.558 1.051a1 1 0 0 1 0 1.966l-5.558 1.051a2 2 0 0 0-1.594 1.594l-1.051 5.558a1 1 0 0 1-1.966 0l-1.051-5.558a2 2 0 0 0-1.594-1.594l-5.558-1.051a1 1 0 0 1 0-1.966l5.558-1.051a2 2 0 0 0 1.594-1.594z",key:"1s2grr"}],["path",{d:"M20 2v4",key:"1rf3ol"}],["path",{d:"M22 4h-4",key:"gwowj6"}],["circle",{cx:"4",cy:"20",r:"2",key:"6kqj1y"}]],gg=ut("sparkles",Jxe);const Zxe=[["path",{d:"M21 10.656V19a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V5a2 2 0 0 1 2-2h12.344",key:"2acyp4"}],["path",{d:"m9 11 3 3L22 4",key:"1pflzl"}]],As=ut("square-check-big",Zxe);const eye=[["rect",{width:"18",height:"18",x:"3",y:"3",rx:"2",key:"afitv7"}],["path",{d:"M8 12h8",key:"1wcyev"}]],tye=ut("square-minus",eye);const nye=[["rect",{width:"18",height:"18",x:"3",y:"3",rx:"2",key:"afitv7"}]],mo=ut("square",nye);const rye=[["path",{d:"M11.525 2.295a.53.53 0 0 1 .95 0l2.31 4.679a2.123 2.123 0 0 0 1.595 1.16l5.166.756a.53.53 0 0 1 .294.904l-3.736 3.638a2.123 2.123 0 0 0-.611 1.878l.882 5.14a.53.53 0 0 1-.771.56l-4.618-2.428a2.122 2.122 0 0 0-1.973 0L6.396 21.01a.53.53 0 0 1-.77-.56l.881-5.139a2.122 2.122 0 0 0-.611-1.879L2.16 9.795a.53.53 0 0 1 .294-.906l5.165-.755a2.122 2.122 0 0 0 1.597-1.16z",key:"r04s7s"}]],bg=ut("star",rye);const aye=[["path",{d:"M21 9a2.4 2.4 0 0 0-.706-1.706l-3.588-3.588A2.4 2.4 0 0 0 15 3H5a2 2 0 0 0-2 2v14a2 2 0 0 0 2 2h14a2 2 0 0 0 2-2z",key:"1dfntj"}],["path",{d:"M15 3v5a1 1 0 0 0 1 1h5",key:"6s6qgf"}]],pJ=ut("sticky-note",aye);const iye=[["circle",{cx:"12",cy:"12",r:"4",key:"4exip2"}],["path",{d:"M12 2v2",key:"tus03m"}],["path",{d:"M12 20v2",key:"1lh1kg"}],["path",{d:"m4.93 4.93 1.41 1.41",key:"149t6j"}],["path",{d:"m17.66 17.66 1.41 1.41",key:"ptbguv"}],["path",{d:"M2 12h2",key:"1t8f8n"}],["path",{d:"M20 12h2",key:"1q8mjw"}],["path",{d:"m6.34 17.66-1.41 1.41",key:"1m8zz5"}],["path",{d:"m19.07 4.93-1.41 1.41",key:"1shlcs"}]],XH=ut("sun",iye);const sye=[["path",{d:"M15 3v18",key:"14nvp0"}],["rect",{width:"18",height:"18",x:"3",y:"3",rx:"2",key:"afitv7"}],["path",{d:"M21 9H3",key:"1338ky"}],["path",{d:"M21 15H3",key:"9uk58r"}]],oye=ut("table-properties",sye);const lye=[["path",{d:"M12.586 2.586A2 2 0 0 0 11.172 2H4a2 2 0 0 0-2 2v7.172a2 2 0 0 0 .586 1.414l8.704 8.704a2.426 2.426 0 0 0 3.42 0l6.58-6.58a2.426 2.426 0 0 0 0-3.42z",key:"vktsd0"}],["circle",{cx:"7.5",cy:"7.5",r:".5",fill:"currentColor",key:"kqv944"}]],ym=ut("tag",lye);const cye=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["circle",{cx:"12",cy:"12",r:"6",key:"1vlfrh"}],["circle",{cx:"12",cy:"12",r:"2",key:"1c9p78"}]],fJ=ut("target",cye);const dye=[["path",{d:"M12 19h8",key:"baeox8"}],["path",{d:"m4 17 6-6-6-6",key:"1yngyt"}]],gJ=ut("terminal",dye);const uye=[["path",{d:"M21 5H3",key:"1fi0y6"}],["path",{d:"M17 12H7",key:"16if0g"}],["path",{d:"M19 19H5",key:"vjpgq2"}]],mye=ut("text-align-center",uye);const hye=[["path",{d:"M21 5H3",key:"1fi0y6"}],["path",{d:"M21 12H9",key:"dn1m92"}],["path",{d:"M21 19H7",key:"4cu937"}]],pye=ut("text-align-end",hye);const fye=[["path",{d:"M21 5H3",key:"1fi0y6"}],["path",{d:"M15 12H3",key:"6jk70r"}],["path",{d:"M17 19H3",key:"z6ezky"}]],gye=ut("text-align-start",fye);const bye=[["path",{d:"M14 4v10.54a4 4 0 1 1-4 0V4a2 2 0 0 1 4 0Z",key:"17jzev"}]],hS=ut("thermometer",bye);const xye=[["line",{x1:"10",x2:"14",y1:"2",y2:"2",key:"14vaq8"}],["line",{x1:"12",x2:"15",y1:"14",y2:"11",key:"17fdiu"}],["circle",{cx:"12",cy:"14",r:"8",key:"1e1u0o"}]],Md=ut("timer",xye);const yye=[["path",{d:"M10 11v6",key:"nco0om"}],["path",{d:"M14 11v6",key:"outv1u"}],["path",{d:"M19 6v14a2 2 0 0 1-2 2H7a2 2 0 0 1-2-2V6",key:"miytrc"}],["path",{d:"M3 6h18",key:"d0wm0j"}],["path",{d:"M8 6V4a2 2 0 0 1 2-2h4a2 2 0 0 1 2 2v2",key:"e791ji"}]],Zt=ut("trash-2",yye);const vye=[["path",{d:"M16 17h6v-6",key:"t6n2it"}],["path",{d:"m22 17-8.5-8.5-5 5L2 7",key:"x473p"}]],tO=ut("trending-down",vye);const wye=[["path",{d:"M16 7h6v6",key:"box55l"}],["path",{d:"m22 7-8.5 8.5-5-5L2 17",key:"1t1m79"}]],NF=ut("trending-up",wye);const Sye=[["path",{d:"m21.73 18-8-14a2 2 0 0 0-3.48 0l-8 14A2 2 0 0 0 4 21h16a2 2 0 0 0 1.73-3",key:"wmoenq"}],["path",{d:"M12 9v4",key:"juzpu7"}],["path",{d:"M12 17h.01",key:"p32p05"}]],Cn=ut("triangle-alert",Sye);const _ye=[["path",{d:"M6 4v6a6 6 0 0 0 12 0V4",key:"9kb039"}],["line",{x1:"4",x2:"20",y1:"20",y2:"20",key:"nun2al"}]],kye=ut("underline",_ye);const Nye=[["path",{d:"m18.84 12.25 1.72-1.71h-.02a5.004 5.004 0 0 0-.12-7.07 5.006 5.006 0 0 0-6.95 0l-1.72 1.71",key:"yqzxt4"}],["path",{d:"m5.17 11.75-1.71 1.71a5.004 5.004 0 0 0 .12 7.07 5.006 5.006 0 0 0 6.95 0l1.71-1.71",key:"4qinb0"}],["line",{x1:"8",x2:"8",y1:"2",y2:"5",key:"1041cp"}],["line",{x1:"2",x2:"5",y1:"8",y2:"8",key:"14m1p5"}],["line",{x1:"16",x2:"16",y1:"19",y2:"22",key:"rzdirn"}],["line",{x1:"19",x2:"22",y1:"16",y2:"16",key:"ox905f"}]],Sp=ut("unlink",Nye);const Cye=[["path",{d:"M12 3v12",key:"1x0j5s"}],["path",{d:"m17 8-5-5-5 5",key:"7q97r8"}],["path",{d:"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4",key:"ih7n3h"}]],_a=ut("upload",Cye);const Pye=[["path",{d:"M19 21v-2a4 4 0 0 0-4-4H9a4 4 0 0 0-4 4v2",key:"975kel"}],["circle",{cx:"12",cy:"7",r:"4",key:"17ys0d"}]],vm=ut("user",Pye);const Tye=[["path",{d:"M16 21v-2a4 4 0 0 0-4-4H6a4 4 0 0 0-4 4v2",key:"1yyitq"}],["path",{d:"M16 3.128a4 4 0 0 1 0 7.744",key:"16gr8j"}],["path",{d:"M22 21v-2a4 4 0 0 0-3-3.87",key:"kshegd"}],["circle",{cx:"9",cy:"7",r:"4",key:"nufk8"}]],Ku=ut("users",Tye);const Aye=[["path",{d:"m16 13 5.223 3.482a.5.5 0 0 0 .777-.416V7.87a.5.5 0 0 0-.752-.432L16 10.5",key:"ftymec"}],["rect",{x:"2",y:"6",width:"14",height:"12",rx:"2",key:"158x01"}]],FN=ut("video",Aye);const jye=[["path",{d:"M11 4.702a.705.705 0 0 0-1.203-.498L6.413 7.587A1.4 1.4 0 0 1 5.416 8H3a1 1 0 0 0-1 1v6a1 1 0 0 0 1 1h2.416a1.4 1.4 0 0 1 .997.413l3.383 3.384A.705.705 0 0 0 11 19.298z",key:"uqj9uw"}],["path",{d:"M16 9a5 5 0 0 1 0 6",key:"1q6k2b"}],["path",{d:"M19.364 18.364a9 9 0 0 0 0-12.728",key:"ijwkga"}]],Mye=ut("volume-2",jye);const Eye=[["path",{d:"M11 4.702a.705.705 0 0 0-1.203-.498L6.413 7.587A1.4 1.4 0 0 1 5.416 8H3a1 1 0 0 0-1 1v6a1 1 0 0 0 1 1h2.416a1.4 1.4 0 0 1 .997.413l3.383 3.384A.705.705 0 0 0 11 19.298z",key:"uqj9uw"}],["line",{x1:"22",x2:"16",y1:"9",y2:"15",key:"1ewh16"}],["line",{x1:"16",x2:"22",y1:"9",y2:"15",key:"5ykzw1"}]],Dye=ut("volume-x",Eye);const Fye=[["path",{d:"m21.64 3.64-1.28-1.28a1.21 1.21 0 0 0-1.72 0L2.36 18.64a1.21 1.21 0 0 0 0 1.72l1.28 1.28a1.2 1.2 0 0 0 1.72 0L21.64 5.36a1.2 1.2 0 0 0 0-1.72",key:"ul74o6"}],["path",{d:"m14 7 3 3",key:"1r5n42"}],["path",{d:"M5 6v4",key:"ilb8ba"}],["path",{d:"M19 14v4",key:"blhpug"}],["path",{d:"M10 2v2",key:"7u0qdc"}],["path",{d:"M7 8H3",key:"zfb6yr"}],["path",{d:"M21 16h-4",key:"1cnmox"}],["path",{d:"M11 3H9",key:"1obp7u"}]],bJ=ut("wand-sparkles",Fye);const Rye=[["circle",{cx:"12",cy:"5",r:"3",key:"rqqgnr"}],["path",{d:"M6.5 8a2 2 0 0 0-1.905 1.46L2.1 18.5A2 2 0 0 0 4 21h16a2 2 0 0 0 1.925-2.54L19.4 9.5A2 2 0 0 0 17.48 8Z",key:"56o5sh"}]],xJ=ut("weight",Rye);const Lye=[["path",{d:"M12 20h.01",key:"zekei9"}],["path",{d:"M8.5 16.429a5 5 0 0 1 7 0",key:"1bycff"}],["path",{d:"M5 12.859a10 10 0 0 1 5.17-2.69",key:"1dl1wf"}],["path",{d:"M19 12.859a10 10 0 0 0-2.007-1.523",key:"4k23kn"}],["path",{d:"M2 8.82a15 15 0 0 1 4.177-2.643",key:"1grhjp"}],["path",{d:"M22 8.82a15 15 0 0 0-11.288-3.764",key:"z3jwby"}],["path",{d:"m2 2 20 20",key:"1ooewy"}]],qd=ut("wifi-off",Lye);const Iye=[["path",{d:"M12 20h.01",key:"zekei9"}],["path",{d:"M2 8.82a15 15 0 0 1 20 0",key:"dnpr2z"}],["path",{d:"M5 12.859a10 10 0 0 1 14 0",key:"1x1e6c"}],["path",{d:"M8.5 16.429a5 5 0 0 1 7 0",key:"1bycff"}]],cp=ut("wifi",Iye);const Oye=[["path",{d:"M12.8 19.6A2 2 0 1 0 14 16H2",key:"148xed"}],["path",{d:"M17.5 8a2.5 2.5 0 1 1 2 4H2",key:"1u4tom"}],["path",{d:"M9.8 4.4A2 2 0 1 1 11 8H2",key:"75valh"}]],yJ=ut("wind",Oye);const zye=[["path",{d:"M14.7 6.3a1 1 0 0 0 0 1.4l1.6 1.6a1 1 0 0 0 1.4 0l3.106-3.105c.32-.322.863-.22.983.218a6 6 0 0 1-8.259 7.057l-7.91 7.91a1 1 0 0 1-2.999-3l7.91-7.91a6 6 0 0 1 7.057-8.259c.438.12.54.662.219.984z",key:"1ngwbx"}]],xg=ut("wrench",zye);const Uye=[["path",{d:"M18 6 6 18",key:"1bl5f8"}],["path",{d:"m6 6 12 12",key:"d8bk6v"}]],Bt=ut("x",Uye);const Bye=[["circle",{cx:"11",cy:"11",r:"8",key:"4ej97u"}],["line",{x1:"21",x2:"16.65",y1:"21",y2:"16.65",key:"13gj7c"}],["line",{x1:"11",x2:"11",y1:"8",y2:"14",key:"1vmskp"}],["line",{x1:"8",x2:"14",y1:"11",y2:"11",key:"durymu"}]],nO=ut("zoom-in",Bye);const Hye=[["path",{d:"M4 14a1 1 0 0 1-.78-1.63l9.9-10.2a.5.5 0 0 1 .86.46l-1.92 6.02A1 1 0 0 0 13 10h7a1 1 0 0 1 .78 1.63l-9.9 10.2a.5.5 0 0 1-.86-.46l1.92-6.02A1 1 0 0 0 11 14z",key:"1xq2db"}]],cc=ut("zap",Hye);const qye=[["circle",{cx:"11",cy:"11",r:"8",key:"4ej97u"}],["line",{x1:"21",x2:"16.65",y1:"21",y2:"16.65",key:"13gj7c"}],["line",{x1:"8",x2:"14",y1:"11",y2:"11",key:"durymu"}]],rO=ut("zoom-out",qye),Sn="/api/v1";let Nn=sessionStorage.getItem("auth_token")??localStorage.getItem("auth_token");function jh(t,e="session"){Nn=t;try{t?sessionStorage.setItem("auth_token",t):sessionStorage.removeItem("auth_token")}catch(n){console.warn("setAuthToken: sessionStorage unavailable, token kept in-memory only",n)}try{t?e==="persistent"&&localStorage.setItem("auth_token",t):localStorage.removeItem("auth_token")}catch(n){console.warn("setAuthToken: localStorage operation failed",n)}}function wm(){return Nn}let RN=null;function YH(t){RN=t}function vJ(){return RN}function Ta(t){if(!RN)return t;const e=t.includes("?")?"&":"?";return`${t}${e}token=${encodeURIComponent(RN)}`}function Tf(t){if(!t)return null;const e=t.match(/filename\*=(?:UTF-8|utf-8)''(.+?)(?:;|$)/);if(e)try{return decodeURIComponent(e[1])}catch{}return t.match(/filename="?([^";\n]+)"?/)?.[1]||null}async function Ee(t,e={}){const n={"Content-Type":"application/json",...e.headers};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}${t}`,{...e,cache:"no-store",credentials:"include",headers:n});if(!r.ok){const o=(await r.json().catch(()=>({}))).detail,l=typeof o=="string"?o:o?JSON.stringify(o):`HTTP ${r.status}`;throw r.status===401&&["Could not validate credentials","Token has expired","User not found or inactive","Invalid API key","API key has expired"].some(d=>l.includes(d))&&jh(null),new Error(l)}const i=r.headers.get("content-length");if(!(r.status===204||i==="0"))return await r.json()}const oe={getAuthStatus:()=>Ee("/auth/status"),setupAuth:t=>Ee("/auth/setup",{method:"POST",body:JSON.stringify(t)}),login:t=>Ee("/auth/login",{method:"POST",body:JSON.stringify(t)}),logout:()=>Ee("/auth/logout",{method:"POST"}),getCurrentUser:()=>Ee("/auth/me"),disableAuth:()=>Ee("/auth/disable",{method:"POST"}),testSMTP:t=>Ee("/auth/smtp/test",{method:"POST",body:JSON.stringify(t)}),getSMTPSettings:()=>Ee("/auth/smtp"),saveSMTPSettings:t=>Ee("/auth/smtp",{method:"POST",body:JSON.stringify(t)}),enableAdvancedAuth:()=>Ee("/auth/advanced-auth/enable",{method:"POST"}),disableAdvancedAuth:()=>Ee("/auth/advanced-auth/disable",{method:"POST"}),getAdvancedAuthStatus:()=>Ee("/auth/advanced-auth/status"),getLDAPStatus:()=>Ee("/auth/ldap/status"),testLDAP:()=>Ee("/auth/ldap/test",{method:"POST"}),forgotPassword:t=>Ee("/auth/forgot-password",{method:"POST",body:JSON.stringify(t)}),forgotPasswordConfirm:(t,e)=>Ee("/auth/forgot-password/confirm",{method:"POST",body:JSON.stringify({token:t,new_password:e})}),resetUserPassword:t=>Ee("/auth/reset-password",{method:"POST",body:JSON.stringify(t)}),get2FAStatus:()=>Ee("/auth/2fa/status"),setupTOTP:()=>Ee("/auth/2fa/totp/setup",{method:"POST"}),enableTOTP:t=>Ee("/auth/2fa/totp/enable",{method:"POST",body:JSON.stringify({code:t})}),disableTOTP:t=>Ee("/auth/2fa/totp/disable",{method:"POST",body:JSON.stringify({code:t})}),regenerateBackupCodes:t=>Ee("/auth/2fa/totp/regenerate-backup-codes",{method:"POST",body:JSON.stringify({code:t})}),enableEmailOTP:()=>Ee("/auth/2fa/email/enable",{method:"POST"}),confirmEnableEmailOTP:(t,e)=>Ee("/auth/2fa/email/enable/confirm",{method:"POST",body:JSON.stringify({setup_token:t,code:e})}),disableEmailOTP:t=>Ee("/auth/2fa/email/disable",{method:"POST",body:JSON.stringify({password:t})}),sendEmailOTP:t=>Ee("/auth/2fa/email/send",{method:"POST",body:JSON.stringify({pre_auth_token:t})}),verify2FA:t=>Ee("/auth/2fa/verify",{method:"POST",body:JSON.stringify(t)}),admin2FADisable:t=>Ee(`/auth/2fa/admin/${t}`,{method:"DELETE"}),getOIDCProviders:()=>Ee("/auth/oidc/providers"),getOIDCProvidersAll:()=>Ee("/auth/oidc/providers/all"),createOIDCProvider:t=>Ee("/auth/oidc/providers",{method:"POST",body:JSON.stringify(t)}),updateOIDCProvider:(t,e)=>Ee(`/auth/oidc/providers/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteOIDCProvider:t=>Ee(`/auth/oidc/providers/${t}`,{method:"DELETE"}),getOIDCAuthorizeUrl:t=>Ee(`/auth/oidc/authorize/${t}`),exchangeOIDCToken:t=>Ee("/auth/oidc/exchange",{method:"POST",body:JSON.stringify({oidc_token:t})}),getOIDCLinks:()=>Ee("/auth/oidc/links"),deleteOIDCLink:t=>Ee(`/auth/oidc/links/${t}`,{method:"DELETE"}),getUsers:()=>Ee("/users/"),getUser:t=>Ee(`/users/${t}`),createUser:t=>Ee("/users/",{method:"POST",body:JSON.stringify(t)}),updateUser:(t,e)=>Ee(`/users/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteUser:(t,e=!1)=>Ee(`/users/${t}?delete_items=${e}`,{method:"DELETE"}),getUserItemsCount:t=>Ee(`/users/${t}/items-count`),changePassword:(t,e)=>Ee("/users/me/change-password",{method:"POST",body:JSON.stringify({current_password:t,new_password:e})}),getUserEmailPreferences:()=>Ee("/user-notifications/preferences"),updateUserEmailPreferences:t=>Ee("/user-notifications/preferences",{method:"PUT",body:JSON.stringify(t)}),getPermissions:()=>Ee("/groups/permissions"),getGroups:()=>Ee("/groups/"),getGroup:t=>Ee(`/groups/${t}`),createGroup:t=>Ee("/groups/",{method:"POST",body:JSON.stringify(t)}),updateGroup:(t,e)=>Ee(`/groups/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteGroup:t=>Ee(`/groups/${t}`,{method:"DELETE"}),addUserToGroup:(t,e)=>Ee(`/groups/${t}/users/${e}`,{method:"POST"}),removeUserFromGroup:(t,e)=>Ee(`/groups/${t}/users/${e}`,{method:"DELETE"}),getPrinters:()=>Ee("/printers/"),getPrinter:t=>Ee(`/printers/${t}`),createPrinter:t=>Ee("/printers/",{method:"POST",body:JSON.stringify(t)}),updatePrinter:(t,e)=>Ee(`/printers/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deletePrinter:(t,e=!0)=>Ee(`/printers/${t}?delete_archives=${e}`,{method:"DELETE"}),getDeveloperModeWarnings:()=>Ee("/printers/developer-mode-warnings"),getAvailableFilaments:(t,e)=>{const n=new URLSearchParams({model:t});return e&&n.set("location",e),Ee(`/printers/available-filaments?${n}`)},getPrinterStatus:t=>Ee(`/printers/${t}/status`),refreshPrinterStatus:t=>Ee(`/printers/${t}/refresh-status`,{method:"POST"}),connectPrinter:t=>Ee(`/printers/${t}/connect`,{method:"POST"}),disconnectPrinter:t=>Ee(`/printers/${t}/disconnect`,{method:"POST"}),testExternalCamera:(t,e,n)=>Ee(`/printers/${t}/camera/external/test?url=${encodeURIComponent(e)}&camera_type=${encodeURIComponent(n)}`,{method:"POST"}),stopPrint:t=>Ee(`/printers/${t}/print/stop`,{method:"POST"}),pausePrint:t=>Ee(`/printers/${t}/print/pause`,{method:"POST"}),resumePrint:t=>Ee(`/printers/${t}/print/resume`,{method:"POST"}),clearPlate:t=>Ee(`/printers/${t}/clear-plate`,{method:"POST"}),getCurrentPrintUser:t=>Ee(`/printers/${t}/current-print-user`),setPrintSpeed:(t,e)=>Ee(`/printers/${t}/print-speed?mode=${e}`,{method:"POST"}),setAirductMode:(t,e)=>Ee(`/printers/${t}/airduct-mode?mode=${e}`,{method:"POST"}),bedJog:(t,e,n=!1)=>Ee(`/printers/${t}/bed-jog?distance=${e}&force=${n}`,{method:"POST"}),homeAxes:(t,e="z")=>Ee(`/printers/${t}/home-axes?axes=${e}`,{method:"POST"}),setChamberLight:(t,e)=>Ee(`/printers/${t}/chamber-light?on=${e}`,{method:"POST"}),startDrying:(t,e,n,r,i="",s=!1)=>Ee(`/printers/${t}/drying/start?ams_id=${e}&temp=${n}&duration=${r}&filament=${encodeURIComponent(i)}&rotate_tray=${s}`,{method:"POST"}),stopDrying:(t,e)=>Ee(`/printers/${t}/drying/stop?ams_id=${e}`,{method:"POST"}),getPrintableObjects:t=>Ee(`/printers/${t}/print/objects`),skipObjects:(t,e)=>Ee(`/printers/${t}/print/skip-objects`,{method:"POST",body:JSON.stringify(e)}),clearHMSErrors:t=>Ee(`/printers/${t}/hms/clear`,{method:"POST"}),refreshAmsSlot:(t,e,n)=>Ee(`/printers/${t}/ams/${e}/slot/${n}/refresh`,{method:"POST"}),enableMQTTLogging:t=>Ee(`/printers/${t}/logging/enable`,{method:"POST"}),disableMQTTLogging:t=>Ee(`/printers/${t}/logging/disable`,{method:"POST"}),getMQTTLogs:t=>Ee(`/printers/${t}/logging`),clearMQTTLogs:t=>Ee(`/printers/${t}/logging`,{method:"DELETE"}),getPrinterFiles:(t,e="/")=>Ee(`/printers/${t}/files?path=${encodeURIComponent(e)}`),getPrinterFileDownloadUrl:(t,e)=>`${Sn}/printers/${t}/files/download?path=${encodeURIComponent(e)}`,getPrinterFileGcodeUrl:(t,e)=>`${Sn}/printers/${t}/files/gcode?path=${encodeURIComponent(e)}`,getPrinterFilePlates:(t,e)=>Ee(`/printers/${t}/files/plates?path=${encodeURIComponent(e)}`),getPrinterFilePlateThumbnail:(t,e,n)=>Ta(`${Sn}/printers/${t}/files/plate-thumbnail/${e}?path=${encodeURIComponent(n)}`),downloadPrinterFile:async(t,e)=>{const n={};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/printers/${t}/files/download?path=${encodeURIComponent(e)}`,{headers:n});if(!r.ok){const d=await r.json().catch(()=>({}));throw new Error(d.detail||`HTTP ${r.status}`)}const i=r.headers.get("Content-Disposition"),s=Tf(i)||e.split("/").pop()||"download",o=await r.blob(),l=window.URL.createObjectURL(o),c=document.createElement("a");c.href=l,c.download=s,document.body.appendChild(c),c.click(),document.body.removeChild(c),window.URL.revokeObjectURL(l)},downloadPrinterFilesAsZip:async(t,e)=>{const n={"Content-Type":"application/json"};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/printers/${t}/files/download-zip`,{method:"POST",headers:n,body:JSON.stringify({paths:e})});if(!r.ok){const i=await r.json().catch(()=>({}));throw new Error(i.detail||`HTTP ${r.status}`)}return r.blob()},deletePrinterFile:(t,e)=>Ee(`/printers/${t}/files?path=${encodeURIComponent(e)}`,{method:"DELETE"}),getPrinterStorage:t=>Ee(`/printers/${t}/storage`),getArchives:(t,e,n=1e4,r=0,i,s)=>{const o=new URLSearchParams;return t&&o.set("printer_id",String(t)),e&&o.set("project_id",String(e)),o.set("limit",String(n)),o.set("offset",String(r)),i&&o.set("date_from",i),s&&o.set("date_to",s),Ee(`/archives/?${o}`)},getArchivesSlim:(t,e,n)=>{const r=new URLSearchParams;t&&r.set("date_from",t),e&&r.set("date_to",e),n!==void 0&&r.set("created_by_id",String(n));const i=r.toString();return Ee(`/archives/slim${i?`?${i}`:""}`)},getArchive:t=>Ee(`/archives/${t}`),searchArchives:(t,e)=>{const n=new URLSearchParams;return n.set("q",t),e?.printerId&&n.set("printer_id",String(e.printerId)),e?.projectId&&n.set("project_id",String(e.projectId)),e?.status&&n.set("status",e.status),e?.limit&&n.set("limit",String(e.limit)),e?.offset&&n.set("offset",String(e.offset)),Ee(`/archives/search?${n}`)},rebuildSearchIndex:()=>Ee("/archives/search/rebuild-index",{method:"POST"}),updateArchive:(t,e)=>Ee(`/archives/${t}`,{method:"PATCH",body:JSON.stringify(e)}),toggleFavorite:t=>Ee(`/archives/${t}/favorite`,{method:"POST"}),deleteArchive:t=>Ee(`/archives/${t}`,{method:"DELETE"}),previewArchivePurge:t=>Ee(`/archives/purge/preview?older_than_days=${t}`),executeArchivePurge:t=>Ee("/archives/purge",{method:"POST",body:JSON.stringify({older_than_days:t})}),getArchivePurgeSettings:()=>Ee("/archives/purge/settings"),updateArchivePurgeSettings:t=>Ee("/archives/purge/settings",{method:"PUT",body:JSON.stringify(t)}),getArchiveStats:t=>{const e=new URLSearchParams;t?.dateFrom&&e.set("date_from",t.dateFrom),t?.dateTo&&e.set("date_to",t.dateTo),t?.createdById!==void 0&&e.set("created_by_id",String(t.createdById));const n=e.toString();return Ee(`/archives/stats${n?`?${n}`:""}`)},getTags:()=>Ee("/archives/tags"),renameTag:(t,e)=>Ee(`/archives/tags/${encodeURIComponent(t)}`,{method:"PUT",body:JSON.stringify({new_name:e})}),deleteTag:t=>Ee(`/archives/tags/${encodeURIComponent(t)}`,{method:"DELETE"}),recalculateCosts:()=>Ee("/archives/recalculate-costs",{method:"POST"}),getFailureAnalysis:t=>{const e=new URLSearchParams;t?.days&&e.set("days",String(t.days)),t?.dateFrom&&e.set("date_from",t.dateFrom),t?.dateTo&&e.set("date_to",t.dateTo),t?.printerId&&e.set("printer_id",String(t.printerId)),t?.projectId&&e.set("project_id",String(t.projectId)),t?.createdById!==void 0&&e.set("created_by_id",String(t.createdById));const n=e.toString();return Ee(`/archives/analysis/failures${n?`?${n}`:""}`)},compareArchives:t=>Ee(`/archives/compare?archive_ids=${t.join(",")}`),findSimilarArchives:(t,e=10)=>Ee(`/archives/${t}/similar?limit=${e}`),exportArchives:async t=>{const e=new URLSearchParams;t?.format&&e.set("format",t.format),t?.fields&&e.set("fields",t.fields.join(",")),t?.printerId&&e.set("printer_id",String(t.printerId)),t?.projectId&&e.set("project_id",String(t.projectId)),t?.status&&e.set("status",t.status),t?.dateFrom&&e.set("date_from",t.dateFrom),t?.dateTo&&e.set("date_to",t.dateTo),t?.search&&e.set("search",t.search);const n={};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/archives/export?${e}`,{headers:n});if(!r.ok){const l=await r.json().catch(()=>({}));throw new Error(l.detail||`HTTP ${r.status}`)}const i=r.headers.get("Content-Disposition");let s=t?.format==="xlsx"?"archives_export.xlsx":"archives_export.csv";if(i){const l=i.match(/filename="?([^"]+)"?/);l&&(s=l[1])}return{blob:await r.blob(),filename:s}},exportStats:async t=>{const e=new URLSearchParams;t?.format&&e.set("format",t.format),t?.days&&e.set("days",String(t.days)),t?.printerId&&e.set("printer_id",String(t.printerId)),t?.projectId&&e.set("project_id",String(t.projectId)),t?.createdById!==void 0&&e.set("created_by_id",String(t.createdById));const n={};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/archives/stats/export?${e}`,{headers:n});if(!r.ok){const l=await r.json().catch(()=>({}));throw new Error(l.detail||`HTTP ${r.status}`)}const i=r.headers.get("Content-Disposition");let s=t?.format==="xlsx"?"stats_export.xlsx":"stats_export.csv";if(i){const l=i.match(/filename="?([^"]+)"?/);l&&(s=l[1])}return{blob:await r.blob(),filename:s}},getArchiveDuplicates:t=>Ee(`/archives/${t}/duplicates`),backfillContentHashes:()=>Ee("/archives/backfill-hashes",{method:"POST"}),getArchiveThumbnail:t=>Ta(`${Sn}/archives/${t}/thumbnail?v=${Date.now()}`),getArchivePlateThumbnail:(t,e)=>Ta(`${Sn}/archives/${t}/plate-thumbnail/${e}`),getArchiveDownload:t=>`${Sn}/archives/${t}/download`,downloadArchive:async(t,e)=>{const n={};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/archives/${t}/download`,{headers:n});if(!r.ok){const d=await r.json().catch(()=>({}));throw new Error(d.detail||`HTTP ${r.status}`)}const i=r.headers.get("Content-Disposition"),s=Tf(i)||e||`archive_${t}.3mf`,o=await r.blob(),l=window.URL.createObjectURL(o),c=document.createElement("a");c.href=l,c.download=s,document.body.appendChild(c),c.click(),document.body.removeChild(c),window.URL.revokeObjectURL(l)},getArchiveGcode:t=>`${Sn}/archives/${t}/gcode`,getArchivePlatePreview:t=>Ta(`${Sn}/archives/${t}/plate-preview`),getArchiveTimelapse:t=>Ta(`${Sn}/archives/${t}/timelapse?v=${Date.now()}`),scanArchiveTimelapse:t=>Ee(`/archives/${t}/timelapse/scan`,{method:"POST"}),selectArchiveTimelapse:(t,e)=>Ee(`/archives/${t}/timelapse/select?filename=${encodeURIComponent(e)}`,{method:"POST"}),deleteArchiveTimelapse:t=>Ee(`/archives/${t}/timelapse`,{method:"DELETE"}),uploadArchiveTimelapse:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/archives/${t}/timelapse/upload`,{method:"POST",headers:r,body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},getTimelapseInfo:t=>Ee(`/archives/${t}/timelapse/info`),getTimelapseThumbnails:(t,e=10)=>Ee(`/archives/${t}/timelapse/thumbnails?count=${e}`),processTimelapse:async(t,e,n)=>{const r=new FormData;r.append("trim_start",String(e.trimStart??0)),e.trimEnd!==void 0&&r.append("trim_end",String(e.trimEnd)),r.append("speed",String(e.speed??1)),r.append("save_mode",e.saveMode),e.outputFilename&&r.append("output_filename",e.outputFilename),n&&r.append("audio",n);const i={};Nn&&(i.Authorization=`Bearer ${Nn}`);const s=await fetch(`${Sn}/archives/${t}/timelapse/process`,{method:"POST",headers:i,body:r});if(!s.ok){const o=await s.json().catch(()=>({}));throw new Error(o.detail||`HTTP ${s.status}`)}return s.json()},getArchivePhotoUrl:(t,e)=>Ta(`${Sn}/archives/${t}/photos/${encodeURIComponent(e)}`),uploadArchivePhoto:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/archives/${t}/photos`,{headers:r,method:"POST",body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},deleteArchivePhoto:(t,e)=>Ee(`/archives/${t}/photos/${encodeURIComponent(e)}`,{method:"DELETE"}),getSource3mfDownloadUrl:t=>`${Sn}/archives/${t}/source`,downloadSource3mf:async t=>{const e={};Nn&&(e.Authorization=`Bearer ${Nn}`);const n=await fetch(`${Sn}/archives/${t}/source`,{headers:e});if(!n.ok){const c=await n.json().catch(()=>({}));throw new Error(c.detail||`HTTP ${n.status}`)}const r=n.headers.get("Content-Disposition"),i=Tf(r)||`source_${t}.3mf`,s=await n.blob(),o=window.URL.createObjectURL(s),l=document.createElement("a");l.href=o,l.download=i,document.body.appendChild(l),l.click(),document.body.removeChild(l),window.URL.revokeObjectURL(o)},getSource3mfForSlicer:(t,e)=>{const n=e.replace(/[/\\?#]/g,"_");return`${Sn}/archives/${t}/source/${encodeURIComponent(n.endsWith(".3mf")?n:n+".3mf")}`},createSourceSlicerToken:t=>Ee(`/archives/${t}/source-slicer-token`,{method:"POST"}),getSourceSlicerDownloadUrl:(t,e,n)=>{const r=n.replace(/[/\\?#]/g,"_");return`${Sn}/archives/${t}/source-dl/${e}/${encodeURIComponent(r.endsWith(".3mf")?r:r+".3mf")}`},uploadSource3mf:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/archives/${t}/source`,{method:"POST",headers:r,body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},deleteSource3mf:t=>Ee(`/archives/${t}/source`,{method:"DELETE"}),getF3dDownloadUrl:t=>`${Sn}/archives/${t}/f3d`,downloadF3d:async t=>{const e={};Nn&&(e.Authorization=`Bearer ${Nn}`);const n=await fetch(`${Sn}/archives/${t}/f3d`,{headers:e});if(!n.ok){const c=await n.json().catch(()=>({}));throw new Error(c.detail||`HTTP ${n.status}`)}const r=n.headers.get("Content-Disposition"),i=Tf(r)||`archive_${t}.f3d`,s=await n.blob(),o=window.URL.createObjectURL(s),l=document.createElement("a");l.href=o,l.download=i,document.body.appendChild(l),l.click(),document.body.removeChild(l),window.URL.revokeObjectURL(o)},uploadF3d:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/archives/${t}/f3d`,{method:"POST",headers:r,body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},deleteF3d:t=>Ee(`/archives/${t}/f3d`,{method:"DELETE"}),getArchiveQRCodeUrl:(t,e=200)=>Ta(`${Sn}/archives/${t}/qrcode?size=${e}`),getArchiveCapabilities:t=>Ee(`/archives/${t}/capabilities`),getArchiveProjectPage:t=>Ee(`/archives/${t}/project-page`),updateArchiveProjectPage:(t,e)=>Ee(`/archives/${t}/project-page`,{method:"PATCH",body:JSON.stringify(e)}),getArchiveProjectImageUrl:(t,e)=>Ta(`${Sn}/archives/${t}/project-image/${encodeURIComponent(e)}`),getArchiveForSlicer:(t,e)=>{const n=e.replace(/[/\\?#]/g,"_");return`${Sn}/archives/${t}/file/${encodeURIComponent(n.endsWith(".3mf")?n:n+".3mf")}`},createArchiveSlicerToken:t=>Ee(`/archives/${t}/slicer-token`,{method:"POST"}),getArchiveSlicerDownloadUrl:(t,e,n)=>{const r=n.replace(/[/\\?#]/g,"_");return`${Sn}/archives/${t}/dl/${e}/${encodeURIComponent(r.endsWith(".3mf")?r:r+".3mf")}`},getArchivePlates:t=>Ee(`/archives/${t}/plates`),getArchiveFilamentRequirements:(t,e,n)=>{const r=new URLSearchParams;return e!==void 0&&r.set("plate_id",String(e)),n&&r.set("request_id",n),Ee(`/archives/${t}/filament-requirements${r.toString()?`?${r}`:""}`)},reprintArchive:(t,e,n)=>Ee(`/archives/${t}/reprint?printer_id=${e}`,{method:"POST",headers:n?{"Content-Type":"application/json"}:void 0,body:n?JSON.stringify(n):void 0}),uploadArchive:async(t,e)=>{const n=new FormData;n.append("file",t);const r=e?`${Sn}/archives/upload?printer_id=${e}`:`${Sn}/archives/upload`,i={};Nn&&(i.Authorization=`Bearer ${Nn}`);const s=await fetch(r,{method:"POST",headers:i,body:n});if(!s.ok){const o=await s.json().catch(()=>({}));throw new Error(o.detail||`HTTP ${s.status}`)}return s.json()},uploadArchivesBulk:async(t,e)=>{const n=new FormData;t.forEach(o=>n.append("files",o));const r=e?`${Sn}/archives/upload-bulk?printer_id=${e}`:`${Sn}/archives/upload-bulk`,i={};Nn&&(i.Authorization=`Bearer ${Nn}`);const s=await fetch(r,{method:"POST",headers:i,body:n});if(!s.ok){const o=await s.json().catch(()=>({}));throw new Error(o.detail||`HTTP ${s.status}`)}return s.json()},getPrintLog:t=>{const e=new URLSearchParams;return t?.search&&e.set("search",t.search),t?.printerId&&e.set("printer_id",String(t.printerId)),t?.username&&e.set("created_by_username",t.username),t?.status&&e.set("status",t.status),t?.dateFrom&&e.set("date_from",t.dateFrom),t?.dateTo&&e.set("date_to",t.dateTo),t?.limit&&e.set("limit",String(t.limit)),t?.offset!==void 0&&e.set("offset",String(t.offset)),Ee(`/print-log/?${e}`)},getPrintLogThumbnail:t=>Ta(`${Sn}/print-log/${t}/thumbnail`),clearPrintLog:()=>Ee("/print-log/",{method:"DELETE"}),getSettings:()=>Ee("/settings/"),getDefaultSidebarOrder:()=>Ee("/settings/default-sidebar-order"),updateSettings:t=>Ee("/settings/",{method:"PUT",body:JSON.stringify(t)}),getMQTTStatus:()=>Ee("/settings/mqtt/status"),resetSettings:()=>Ee("/settings/reset",{method:"POST"}),exportBackup:async()=>{const t=`${Sn}/settings/backup`,e={};Nn&&(e.Authorization=`Bearer ${Nn}`);const n=await fetch(t,{headers:e});if(!n.ok){const o=await n.text();throw new Error(o||`Backup failed with status ${n.status}`)}const r=n.headers.get("Content-Disposition");let i="bambuddy-backup.zip";if(r){const o=r.match(/filename=([^;]+)/);o&&(i=o[1].trim().replace(/^"(.*)"$/,"$1"))}return{blob:await n.blob(),filename:i}},importBackup:async t=>{const e=new FormData;e.append("file",t);const n=`${Sn}/settings/restore`,r={};return Nn&&(r.Authorization=`Bearer ${Nn}`),(await fetch(n,{method:"POST",headers:r,body:e})).json()},checkFfmpeg:()=>Ee("/settings/check-ffmpeg"),getNetworkInterfaces:()=>Ee("/settings/network-interfaces"),getCloudStatus:()=>Ee("/cloud/status"),cloudLogin:(t,e,n="global")=>Ee("/cloud/login",{method:"POST",body:JSON.stringify({email:t,password:e,region:n})}),cloudVerify:(t,e,n,r="global")=>Ee("/cloud/verify",{method:"POST",body:JSON.stringify({email:t,code:e,tfa_key:n,region:r})}),cloudSetToken:(t,e="global")=>Ee("/cloud/token",{method:"POST",body:JSON.stringify({access_token:t,region:e})}),cloudLogout:()=>Ee("/cloud/logout",{method:"POST"}),getCloudSettings:(t="02.04.00.70")=>Ee(`/cloud/settings?version=${t}`),getBuiltinFilaments:()=>Ee("/cloud/builtin-filaments"),getFilamentIdMap:()=>Ee("/cloud/filament-id-map"),getMakerworldStatus:()=>Ee("/makerworld/status"),resolveMakerworldUrl:t=>Ee("/makerworld/resolve",{method:"POST",body:JSON.stringify({url:t})}),getMakerworldRecentImports:(t=10)=>Ee(`/makerworld/recent-imports?limit=${t}`),importMakerworldInstance:(t,e,n,r)=>Ee("/makerworld/import",{method:"POST",body:JSON.stringify({model_id:t,instance_id:e??null,profile_id:n??null,folder_id:r??null})}),getCloudSettingDetail:t=>Ee(`/cloud/settings/${t}`),createCloudSetting:t=>Ee("/cloud/settings",{method:"POST",body:JSON.stringify(t)}),updateCloudSetting:(t,e)=>Ee(`/cloud/settings/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteCloudSetting:t=>Ee(`/cloud/settings/${t}`,{method:"DELETE"}),getCloudDevices:()=>Ee("/cloud/devices"),getCloudFields:t=>Ee(`/cloud/fields/${t}`),getAllCloudFields:()=>Ee("/cloud/fields"),getFilamentInfo:t=>Ee("/cloud/filament-info",{method:"POST",body:JSON.stringify(t)}),getSmartPlugs:()=>Ee("/smart-plugs/"),getSmartPlug:t=>Ee(`/smart-plugs/${t}`),getSmartPlugByPrinter:t=>Ee(`/smart-plugs/by-printer/${t}`),getScriptPlugsByPrinter:t=>Ee(`/smart-plugs/by-printer/${t}/scripts`),createSmartPlug:t=>Ee("/smart-plugs/",{method:"POST",body:JSON.stringify(t)}),updateSmartPlug:(t,e)=>Ee(`/smart-plugs/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteSmartPlug:t=>Ee(`/smart-plugs/${t}`,{method:"DELETE"}),controlSmartPlug:(t,e)=>Ee(`/smart-plugs/${t}/control`,{method:"POST",body:JSON.stringify({action:e})}),getSmartPlugStatus:t=>Ee(`/smart-plugs/${t}/status`),testSmartPlugConnection:(t,e,n)=>Ee("/smart-plugs/test-connection",{method:"POST",body:JSON.stringify({ip_address:t,username:e,password:n})}),startTasmotaScan:()=>Ee("/smart-plugs/discover/scan",{method:"POST"}),getTasmotaScanStatus:()=>Ee("/smart-plugs/discover/status"),stopTasmotaScan:()=>Ee("/smart-plugs/discover/stop",{method:"POST"}),getDiscoveredTasmotaDevices:()=>Ee("/smart-plugs/discover/devices"),testHAConnection:(t,e)=>Ee("/smart-plugs/ha/test-connection",{method:"POST",body:JSON.stringify({url:t,token:e})}),getHAEntities:t=>{const e=t?`?search=${encodeURIComponent(t)}`:"";return Ee(`/smart-plugs/ha/entities${e}`)},getHASensorEntities:()=>Ee("/smart-plugs/ha/sensors"),testRESTConnection:(t,e="GET",n)=>Ee("/smart-plugs/rest/test-connection",{method:"POST",body:JSON.stringify({url:t,method:e,headers:n})}),getQueue:(t,e,n)=>{const r=new URLSearchParams;return t&&r.set("printer_id",String(t)),e&&r.set("status",e),n&&r.set("target_model",n),Ee(`/queue/?${r}`)},getQueueItem:t=>Ee(`/queue/${t}`),addToQueue:t=>Ee("/queue/",{method:"POST",body:JSON.stringify(t)}),updateQueueItem:(t,e)=>Ee(`/queue/${t}`,{method:"PATCH",body:JSON.stringify(e)}),removeFromQueue:t=>Ee(`/queue/${t}`,{method:"DELETE"}),reorderQueue:t=>Ee("/queue/reorder",{method:"POST",body:JSON.stringify({items:t})}),cancelQueueItem:t=>Ee(`/queue/${t}/cancel`,{method:"POST"}),stopQueueItem:t=>Ee(`/queue/${t}/stop`,{method:"POST"}),startQueueItem:t=>Ee(`/queue/${t}/start`,{method:"POST"}),bulkUpdateQueue:t=>Ee("/queue/bulk",{method:"PATCH",body:JSON.stringify(t)}),getBatches:t=>{const e=t?`?status=${t}`:"";return Ee(`/queue/batches${e}`)},getBatch:t=>Ee(`/queue/batches/${t}`),cancelBatch:t=>Ee(`/queue/batches/${t}`,{method:"DELETE"}),getKProfiles:(t,e="0.4")=>Ee(`/printers/${t}/kprofiles/?nozzle_diameter=${e}`),setKProfile:(t,e)=>Ee(`/printers/${t}/kprofiles/`,{method:"POST",body:JSON.stringify(e)}),deleteKProfile:(t,e)=>Ee(`/printers/${t}/kprofiles/`,{method:"DELETE",body:JSON.stringify(e)}),setKProfilesBatch:(t,e)=>Ee(`/printers/${t}/kprofiles/batch`,{method:"POST",body:JSON.stringify(e)}),getKProfileNotes:t=>Ee(`/printers/${t}/kprofiles/notes`),setKProfileNote:(t,e,n)=>Ee(`/printers/${t}/kprofiles/notes`,{method:"PUT",body:JSON.stringify({setting_id:e,note:n})}),deleteKProfileNote:(t,e)=>Ee(`/printers/${t}/kprofiles/notes/${encodeURIComponent(e)}`,{method:"DELETE"}),getSlotPresets:t=>Ee(`/printers/${t}/slot-presets`),getSlotPreset:(t,e,n)=>Ee(`/printers/${t}/slot-presets/${e}/${n}`),saveSlotPreset:(t,e,n,r,i,s="cloud")=>Ee(`/printers/${t}/slot-presets/${e}/${n}?preset_id=${encodeURIComponent(r)}&preset_name=${encodeURIComponent(i)}&preset_source=${encodeURIComponent(s)}`,{method:"PUT"}),deleteSlotPreset:(t,e,n)=>Ee(`/printers/${t}/slot-presets/${e}/${n}`,{method:"DELETE"}),getAmsLabels:t=>Ee(`/printers/${t}/ams-labels`),saveAmsLabel:(t,e,n,r="")=>Ee(`/printers/${t}/ams-labels/${e}`,{method:"PUT",body:JSON.stringify({label:n,ams_serial:r})}),deleteAmsLabel:(t,e,n="")=>Ee(`/printers/${t}/ams-labels/${e}?ams_serial=${encodeURIComponent(n)}`,{method:"DELETE"}),configureAmsSlot:(t,e,n,r)=>{const i=new URLSearchParams({tray_info_idx:r.tray_info_idx,tray_type:r.tray_type,tray_sub_brands:r.tray_sub_brands,tray_color:r.tray_color,nozzle_temp_min:r.nozzle_temp_min.toString(),nozzle_temp_max:r.nozzle_temp_max.toString(),cali_idx:r.cali_idx.toString(),nozzle_diameter:r.nozzle_diameter});return r.setting_id&&i.set("setting_id",r.setting_id),r.kprofile_filament_id&&i.set("kprofile_filament_id",r.kprofile_filament_id),r.kprofile_setting_id&&i.set("kprofile_setting_id",r.kprofile_setting_id),r.k_value!==void 0&&r.k_value>0&&i.set("k_value",r.k_value.toString()),Ee(`/printers/${t}/slots/${e}/${n}/configure?${i}`,{method:"POST"})},resetAmsSlot:(t,e,n)=>Ee(`/printers/${t}/ams/${e}/tray/${n}/reset`,{method:"POST"}),listFilaments:()=>Ee("/filament-catalog/"),getFilament:t=>Ee(`/filament-catalog/${t}`),getFilamentsByType:t=>Ee(`/filament-catalog/by-type/${t}`),getNotificationProviders:()=>Ee("/notifications/"),getNotificationProvider:t=>Ee(`/notifications/${t}`),createNotificationProvider:t=>Ee("/notifications/",{method:"POST",body:JSON.stringify(t)}),updateNotificationProvider:(t,e)=>Ee(`/notifications/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteNotificationProvider:t=>Ee(`/notifications/${t}`,{method:"DELETE"}),testNotificationProvider:t=>Ee(`/notifications/${t}/test`,{method:"POST"}),testNotificationConfig:t=>Ee("/notifications/test-config",{method:"POST",body:JSON.stringify(t)}),testAllNotificationProviders:()=>Ee("/notifications/test-all",{method:"POST"}),getNotificationTemplates:()=>Ee("/notification-templates"),getNotificationTemplate:t=>Ee(`/notification-templates/${t}`),updateNotificationTemplate:(t,e)=>Ee(`/notification-templates/${t}`,{method:"PUT",body:JSON.stringify(e)}),resetNotificationTemplate:t=>Ee(`/notification-templates/${t}/reset`,{method:"POST"}),getTemplateVariables:()=>Ee("/notification-templates/variables"),previewTemplate:t=>Ee("/notification-templates/preview",{method:"POST",body:JSON.stringify(t)}),getNotificationLogs:t=>{const e=new URLSearchParams;return t?.limit&&e.set("limit",String(t.limit)),t?.offset&&e.set("offset",String(t.offset)),t?.provider_id&&e.set("provider_id",String(t.provider_id)),t?.event_type&&e.set("event_type",t.event_type),t?.success!==void 0&&e.set("success",String(t.success)),t?.days&&e.set("days",String(t.days)),Ee(`/notifications/logs?${e}`)},getNotificationLogStats:(t=7)=>Ee(`/notifications/logs/stats?days=${t}`),clearNotificationLogs:(t=30)=>Ee(`/notifications/logs?older_than_days=${t}`,{method:"DELETE"}),getSpoolmanStatus:()=>Ee("/spoolman/status"),connectSpoolman:()=>Ee("/spoolman/connect",{method:"POST"}),disconnectSpoolman:()=>Ee("/spoolman/disconnect",{method:"POST"}),syncPrinterAms:t=>Ee(`/spoolman/sync/${t}`,{method:"POST"}),syncAllPrintersAms:()=>Ee("/spoolman/sync-all",{method:"POST"}),getSpoolmanSpools:()=>Ee("/spoolman/spools"),getSpoolmanFilaments:()=>Ee("/spoolman/filaments"),getUnlinkedSpools:()=>Ee("/spoolman/spools/unlinked"),getLinkedSpools:()=>Ee("/spoolman/spools/linked"),linkSpool:(t,e)=>Ee(`/spoolman/spools/${t}/link`,{method:"POST",body:JSON.stringify({spool_tag:e.spoolTag,printer_id:e.printerId,ams_id:e.amsId,tray_id:e.trayId})}),unlinkSpool:t=>Ee(`/spoolman/spools/${t}/unlink`,{method:"POST"}),getSpoolmanSettings:()=>Ee("/settings/spoolman"),updateSpoolmanSettings:t=>Ee("/settings/spoolman",{method:"PUT",body:JSON.stringify(t)}),getSpools:(t=!1)=>Ee(`/inventory/spools?include_archived=${t}`),getSpool:t=>Ee(`/inventory/spools/${t}`),createSpool:t=>Ee("/inventory/spools",{method:"POST",body:JSON.stringify(t)}),bulkCreateSpools:(t,e)=>Ee("/inventory/spools/bulk",{method:"POST",body:JSON.stringify({spool:t,quantity:e})}),updateSpool:(t,e)=>Ee(`/inventory/spools/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteSpool:t=>Ee(`/inventory/spools/${t}`,{method:"DELETE"}),archiveSpool:t=>Ee(`/inventory/spools/${t}/archive`,{method:"POST"}),restoreSpool:t=>Ee(`/inventory/spools/${t}/restore`,{method:"POST"}),getSpoolKProfiles:t=>Ee(`/inventory/spools/${t}/k-profiles`),saveSpoolKProfiles:(t,e)=>Ee(`/inventory/spools/${t}/k-profiles`,{method:"PUT",body:JSON.stringify(e)}),getAssignments:t=>Ee(`/inventory/assignments${t?`?printer_id=${t}`:""}`),assignSpool:t=>Ee("/inventory/assignments",{method:"POST",body:JSON.stringify(t)}),unassignSpool:(t,e,n)=>Ee(`/inventory/assignments/${t}/${e}/${n}`,{method:"DELETE"}),getSpoolCatalog:()=>Ee("/inventory/catalog"),addCatalogEntry:t=>Ee("/inventory/catalog",{method:"POST",body:JSON.stringify(t)}),updateCatalogEntry:(t,e)=>Ee(`/inventory/catalog/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteCatalogEntry:t=>Ee(`/inventory/catalog/${t}`,{method:"DELETE"}),bulkDeleteCatalogEntries:t=>Ee("/inventory/catalog/bulk-delete",{method:"POST",body:JSON.stringify({ids:t})}),resetSpoolCatalog:()=>Ee("/inventory/catalog/reset",{method:"POST"}),getColorCatalog:()=>Ee("/inventory/colors"),getColorNameMap:()=>Ee("/inventory/colors/map"),addColorEntry:t=>Ee("/inventory/colors",{method:"POST",body:JSON.stringify(t)}),updateColorEntry:(t,e)=>Ee(`/inventory/colors/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteColorEntry:t=>Ee(`/inventory/colors/${t}`,{method:"DELETE"}),bulkDeleteColorEntries:t=>Ee("/inventory/colors/bulk-delete",{method:"POST",body:JSON.stringify({ids:t})}),resetColorCatalog:()=>Ee("/inventory/colors/reset",{method:"POST"}),lookupColor:(t,e,n)=>Ee(`/inventory/colors/lookup?manufacturer=${encodeURIComponent(t)}&color_name=${encodeURIComponent(e)}${n?`&material=${encodeURIComponent(n)}`:""}`),searchColors:(t,e)=>Ee(`/inventory/colors/search?${t?`manufacturer=${encodeURIComponent(t)}`:""}${t&&e?"&":""}${e?`material=${encodeURIComponent(e)}`:""}`),linkTagToSpool:(t,e)=>Ee(`/inventory/spools/${t}/link-tag`,{method:"PATCH",body:JSON.stringify(e)}),getSpoolUsageHistory:(t,e=50)=>Ee(`/inventory/spools/${t}/usage?limit=${e}`),getAllUsageHistory:(t=100,e)=>Ee(`/inventory/usage?limit=${t}${e?`&printer_id=${e}`:""}`),clearSpoolUsageHistory:t=>Ee(`/inventory/spools/${t}/usage`,{method:"DELETE"}),syncWeightsFromAms:()=>Ee("/inventory/sync-ams-weights",{method:"POST"}),getFilamentPresets:()=>Ee("/cloud/filaments"),getVersion:()=>Ee("/updates/version"),checkForUpdates:()=>Ee("/updates/check"),applyUpdate:()=>Ee("/updates/apply",{method:"POST"}),getUpdateStatus:()=>Ee("/updates/status"),getMaintenanceTypes:()=>Ee("/maintenance/types"),createMaintenanceType:t=>Ee("/maintenance/types",{method:"POST",body:JSON.stringify(t)}),updateMaintenanceType:(t,e)=>Ee(`/maintenance/types/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteMaintenanceType:t=>Ee(`/maintenance/types/${t}`,{method:"DELETE"}),restoreDefaultMaintenanceTypes:()=>Ee("/maintenance/types/restore-defaults",{method:"POST"}),getMaintenanceOverview:()=>Ee("/maintenance/overview"),getPrinterMaintenance:t=>Ee(`/maintenance/printers/${t}`),updateMaintenanceItem:(t,e)=>Ee(`/maintenance/items/${t}`,{method:"PATCH",body:JSON.stringify(e)}),performMaintenance:(t,e)=>Ee(`/maintenance/items/${t}/perform`,{method:"POST",body:JSON.stringify({notes:e})}),getMaintenanceHistory:t=>Ee(`/maintenance/items/${t}/history`),getMaintenanceSummary:()=>Ee("/maintenance/summary"),setPrinterHours:(t,e)=>Ee(`/maintenance/printers/${t}/hours?total_hours=${e}`,{method:"PATCH"}),assignMaintenanceType:(t,e)=>Ee(`/maintenance/printers/${t}/assign/${e}`,{method:"POST"}),removeMaintenanceItem:t=>Ee(`/maintenance/items/${t}`,{method:"DELETE"}),getCameraStreamToken:()=>Ee("/printers/camera/stream-token",{method:"POST"}),createLongLivedCameraToken:t=>Ee("/auth/tokens",{method:"POST",body:JSON.stringify({...t,scope:"camera_stream"})}),listMyLongLivedCameraTokens:()=>Ee("/auth/tokens"),listAllLongLivedCameraTokens:()=>Ee("/auth/tokens/all"),listLongLivedCameraTokensForUser:t=>Ee(`/auth/tokens?user_id=${t}`),revokeLongLivedCameraToken:t=>Ee(`/auth/tokens/${t}`,{method:"DELETE"}),getCameraStreamUrl:(t,e=10)=>Ta(`${Sn}/printers/${t}/camera/stream?fps=${e}`),getCameraSnapshotUrl:t=>Ta(`${Sn}/printers/${t}/camera/snapshot`),testCameraConnection:t=>Ee(`/printers/${t}/camera/test`),getCameraStatus:t=>Ee(`/printers/${t}/camera/status`),checkPlateEmpty:(t,e)=>{const n=new URLSearchParams;return n.set("use_external",String(e?.useExternal??!1)),n.set("include_debug_image",String(e?.includeDebugImage??!1)),Ee(`/printers/${t}/camera/check-plate?${n.toString()}`)},getPlateDetectionStatus:t=>Ee(`/printers/${t}/camera/plate-detection/status`),calibratePlateDetection:(t,e)=>{const n=new URLSearchParams;return e?.label&&n.set("label",e.label),n.set("use_external",String(e?.useExternal??!1)),Ee(`/printers/${t}/camera/plate-detection/calibrate?${n.toString()}`,{method:"POST"})},deletePlateCalibration:t=>Ee(`/printers/${t}/camera/plate-detection/calibrate`,{method:"DELETE"}),getPlateReferences:t=>Ee(`/printers/${t}/camera/plate-detection/references`),getPlateReferenceThumbnailUrl:(t,e)=>Ta(`${Sn}/printers/${t}/camera/plate-detection/references/${e}/thumbnail`),updatePlateReferenceLabel:(t,e,n)=>{const r=new URLSearchParams;return r.set("label",n),Ee(`/printers/${t}/camera/plate-detection/references/${e}?${r.toString()}`,{method:"PUT"})},deletePlateReference:(t,e)=>Ee(`/printers/${t}/camera/plate-detection/references/${e}`,{method:"DELETE"}),getExternalLinks:()=>Ee("/external-links/"),getExternalLink:t=>Ee(`/external-links/${t}`),createExternalLink:t=>Ee("/external-links/",{method:"POST",body:JSON.stringify(t)}),updateExternalLink:(t,e)=>Ee(`/external-links/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteExternalLink:t=>Ee(`/external-links/${t}`,{method:"DELETE"}),reorderExternalLinks:t=>Ee("/external-links/reorder",{method:"PUT",body:JSON.stringify({ids:t})}),uploadExternalLinkIcon:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/external-links/${t}/icon`,{method:"POST",headers:r,body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},deleteExternalLinkIcon:t=>Ee(`/external-links/${t}/icon`,{method:"DELETE"}),getExternalLinkIconUrl:t=>Ta(`${Sn}/external-links/${t}/icon`),getProjects:t=>{const e=new URLSearchParams;return t&&e.set("status",t),Ee(`/projects/?${e}`)},getProject:t=>Ee(`/projects/${t}`),createProject:t=>Ee("/projects/",{method:"POST",body:JSON.stringify(t)}),updateProject:(t,e)=>Ee(`/projects/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteProject:t=>Ee(`/projects/${t}`,{method:"DELETE"}),getProjectArchives:(t,e=100,n=0)=>Ee(`/projects/${t}/archives?limit=${e}&offset=${n}`),addArchivesToProject:(t,e)=>Ee(`/projects/${t}/add-archives`,{method:"POST",body:JSON.stringify({archive_ids:e})}),removeArchivesFromProject:(t,e)=>Ee(`/projects/${t}/remove-archives`,{method:"POST",body:JSON.stringify({archive_ids:e})}),addQueueItemsToProject:(t,e)=>Ee(`/projects/${t}/add-queue`,{method:"POST",body:JSON.stringify({queue_item_ids:e})}),uploadProjectAttachment:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/projects/${t}/attachments`,{method:"POST",headers:r,body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},getProjectAttachmentUrl:(t,e)=>`${Sn}/projects/${t}/attachments/${encodeURIComponent(e)}`,deleteProjectAttachment:(t,e)=>Ee(`/projects/${t}/attachments/${encodeURIComponent(e)}`,{method:"DELETE"}),getProjectCoverImageUrl:t=>Ta(`${Sn}/projects/${t}/cover-image`),uploadProjectCoverImage:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/projects/${t}/cover-image`,{method:"POST",headers:r,body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},deleteProjectCoverImage:t=>Ee(`/projects/${t}/cover-image`,{method:"DELETE"}),getProjectBOM:t=>Ee(`/projects/${t}/bom`),createBOMItem:(t,e)=>Ee(`/projects/${t}/bom`,{method:"POST",body:JSON.stringify(e)}),updateBOMItem:(t,e,n)=>Ee(`/projects/${t}/bom/${e}`,{method:"PATCH",body:JSON.stringify(n)}),deleteBOMItem:(t,e)=>Ee(`/projects/${t}/bom/${e}`,{method:"DELETE"}),getTemplates:()=>Ee("/projects/templates/"),createTemplateFromProject:t=>Ee(`/projects/${t}/create-template`,{method:"POST"}),createProjectFromTemplate:(t,e)=>Ee(`/projects/from-template/${t}${e?`?name=${encodeURIComponent(e)}`:""}`,{method:"POST"}),getProjectTimeline:(t,e=50)=>Ee(`/projects/${t}/timeline?limit=${e}`),exportProjectJson:t=>Ee(`/projects/${t}/export?format=json`),importProject:t=>Ee("/projects/import",{method:"POST",body:JSON.stringify(t)}),importProjectFile:async t=>{const e=new FormData;e.append("file",t);const n={};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/projects/import/file`,{method:"POST",headers:n,body:e});if(!r.ok){const i=await r.json().catch(()=>({}));throw new Error(i.detail||`HTTP ${r.status}`)}return r.json()},exportProjectZip:async t=>{const e={};Nn&&(e.Authorization=`Bearer ${Nn}`);const n=await fetch(`${Sn}/projects/${t}/export`,{headers:e});if(!n.ok){const o=await n.json().catch(()=>({}));throw new Error(o.detail||`HTTP ${n.status}`)}const r=n.headers.get("Content-Disposition"),i=Tf(r)||`project_${t}.zip`;return{blob:await n.blob(),filename:i}},getAPIKeys:()=>Ee("/api-keys/"),createAPIKey:t=>Ee("/api-keys/",{method:"POST",body:JSON.stringify(t)}),updateAPIKey:(t,e)=>Ee(`/api-keys/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteAPIKey:t=>Ee(`/api-keys/${t}`,{method:"DELETE"}),getAMSHistory:(t,e,n=24)=>Ee(`/ams-history/${t}/${e}?hours=${n}`),getSystemInfo:()=>Ee("/system/info"),getStorageUsage:t=>{const e=new URLSearchParams;t?.refresh&&e.set("refresh","true");const n=e.toString();return Ee(`/system/storage-usage${n?`?${n}`:""}`)},getLibraryFolders:()=>Ee("/library/folders"),createLibraryFolder:t=>Ee("/library/folders",{method:"POST",body:JSON.stringify(t)}),updateLibraryFolder:(t,e)=>Ee(`/library/folders/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteLibraryFolder:t=>Ee(`/library/folders/${t}`,{method:"DELETE"}),createExternalFolder:t=>Ee("/library/folders/external",{method:"POST",body:JSON.stringify(t)}),scanExternalFolder:t=>Ee(`/library/folders/${t}/scan`,{method:"POST"}),getLibraryFoldersByProject:t=>Ee(`/library/folders/by-project/${t}`),getLibraryFoldersByArchive:t=>Ee(`/library/folders/by-archive/${t}`),getLibraryFiles:(t,e=!0,n)=>{const r=new URLSearchParams;return t!=null&&r.set("folder_id",String(t)),n!==void 0&&r.set("project_id",String(n)),r.set("include_root",String(e)),Ee(`/library/files?${r}`)},getLibraryFile:t=>Ee(`/library/files/${t}`),uploadLibraryFile:async(t,e,n=!0)=>{const r=new FormData;r.append("file",t);const i=new URLSearchParams;e&&i.set("folder_id",String(e)),i.set("generate_stl_thumbnails",String(n));const s={};Nn&&(s.Authorization=`Bearer ${Nn}`);const o=await fetch(`${Sn}/library/files?${i}`,{method:"POST",headers:s,body:r});if(!o.ok){const l=await o.json().catch(()=>({}));throw new Error(l.detail||`HTTP ${o.status}`)}return o.json()},extractZipFile:async(t,e,n=!0,r=!1,i=!0)=>{const s=new FormData;s.append("file",t);const o=new URLSearchParams;e&&o.set("folder_id",String(e)),o.set("preserve_structure",String(n)),o.set("create_folder_from_zip",String(r)),o.set("generate_stl_thumbnails",String(i));const l={};Nn&&(l.Authorization=`Bearer ${Nn}`);const c=await fetch(`${Sn}/library/files/extract-zip?${o}`,{method:"POST",headers:l,body:s});if(!c.ok){const d=await c.json().catch(()=>({}));throw new Error(d.detail||`HTTP ${c.status}`)}return c.json()},updateLibraryFile:(t,e)=>Ee(`/library/files/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteLibraryFile:t=>Ee(`/library/files/${t}`,{method:"DELETE"}),previewLibraryPurge:(t,e=!0)=>Ee(`/library/purge/preview?older_than_days=${t}&include_never_printed=${e}`),executeLibraryPurge:(t,e=!0)=>Ee("/library/purge",{method:"POST",body:JSON.stringify({older_than_days:t,include_never_printed:e})}),listLibraryTrash:(t=100,e=0)=>Ee(`/library/trash?limit=${t}&offset=${e}`),restoreLibraryTrash:t=>Ee(`/library/trash/${t}/restore`,{method:"POST"}),hardDeleteLibraryTrash:t=>Ee(`/library/trash/${t}`,{method:"DELETE"}),emptyLibraryTrash:()=>Ee("/library/trash",{method:"DELETE"}),getLibraryTrashSettings:()=>Ee("/library/trash/settings"),updateLibraryTrashSettings:t=>Ee("/library/trash/settings",{method:"PUT",body:JSON.stringify(t)}),getLibraryFileDownloadUrl:t=>`${Sn}/library/files/${t}/download`,createLibrarySlicerToken:t=>Ee(`/library/files/${t}/slicer-token`,{method:"POST"}),getLibrarySlicerDownloadUrl:(t,e,n)=>`${Sn}/library/files/${t}/dl/${e}/${encodeURIComponent(n)}`,downloadLibraryFile:async(t,e)=>{const n={};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/library/files/${t}/download`,{headers:n});if(!r.ok){const d=await r.json().catch(()=>({}));throw new Error(d.detail||`HTTP ${r.status}`)}const i=r.headers.get("Content-Disposition"),s=Tf(i)||e||`file_${t}`,o=await r.blob(),l=window.URL.createObjectURL(o),c=document.createElement("a");c.href=l,c.download=s,document.body.appendChild(c),c.click(),document.body.removeChild(c),window.URL.revokeObjectURL(l)},getLibraryFileThumbnailUrl:t=>Ta(`${Sn}/library/files/${t}/thumbnail`),getLibraryFilePlateThumbnail:(t,e)=>Ta(`${Sn}/library/files/${t}/plate-thumbnail/${e}`),getLibraryFileGcodeUrl:t=>`${Sn}/library/files/${t}/gcode`,moveLibraryFiles:(t,e)=>Ee("/library/files/move",{method:"POST",body:JSON.stringify({file_ids:t,folder_id:e})}),bulkDeleteLibrary:(t,e)=>Ee("/library/bulk-delete",{method:"POST",body:JSON.stringify({file_ids:t,folder_ids:e})}),getLibraryStats:()=>Ee("/library/stats"),batchGenerateStlThumbnails:t=>Ee("/library/generate-stl-thumbnails",{method:"POST",body:JSON.stringify(t)}),addLibraryFilesToQueue:t=>Ee("/library/files/add-to-queue",{method:"POST",body:JSON.stringify({file_ids:t})}),printLibraryFile:(t,e,n)=>Ee(`/library/files/${t}/print?printer_id=${e}`,{method:"POST",body:n?JSON.stringify(n):void 0}),cancelBackgroundDispatchJob:t=>Ee(`/background-dispatch/${t}`,{method:"DELETE"}),getLibraryFilePlates:t=>Ee(`/library/files/${t}/plates`),getLibraryFileFilamentRequirements:(t,e,n)=>{const r=new URLSearchParams;return e!==void 0&&r.set("plate_id",String(e)),n&&r.set("request_id",n),Ee(`/library/files/${t}/filament-requirements${r.toString()?`?${r}`:""}`)},getPreviewSliceProgress:async t=>{try{return await Ee(`/slicer/preview-progress/${encodeURIComponent(t)}`)}catch{return null}},getGitHubBackupConfig:()=>Ee("/github-backup/config"),saveGitHubBackupConfig:t=>Ee("/github-backup/config",{method:"POST",body:JSON.stringify(t)}),updateGitHubBackupConfig:t=>Ee("/github-backup/config",{method:"PATCH",body:JSON.stringify(t)}),deleteGitHubBackupConfig:()=>Ee("/github-backup/config",{method:"DELETE"}),testGitHubConnection:(t,e)=>Ee(`/github-backup/test?repo_url=${encodeURIComponent(t)}&token=${encodeURIComponent(e)}`,{method:"POST"}),testGitHubStoredConnection:()=>Ee("/github-backup/test-stored",{method:"POST"}),triggerGitHubBackup:()=>Ee("/github-backup/run",{method:"POST"}),getGitHubBackupStatus:()=>Ee("/github-backup/status"),getGitHubBackupLogs:(t=50)=>Ee(`/github-backup/logs?limit=${t}`),clearGitHubBackupLogs:(t=10)=>Ee(`/github-backup/logs?keep_last=${t}`,{method:"DELETE"}),getLocalBackupStatus:()=>Ee("/local-backup/status"),triggerLocalBackup:()=>Ee("/local-backup/run",{method:"POST"}),getLocalBackups:()=>Ee("/local-backup/backups"),downloadLocalBackup:async t=>{const e=await fetch(`${Sn}/local-backup/backups/${encodeURIComponent(t)}/download`,{headers:Nn?{Authorization:`Bearer ${Nn}`}:{}});if(!e.ok)throw new Error("Download failed");return{blob:await e.blob(),filename:t}},restoreLocalBackup:t=>Ee(`/local-backup/backups/${encodeURIComponent(t)}/restore`,{method:"POST"}),deleteLocalBackup:t=>Ee(`/local-backup/backups/${encodeURIComponent(t)}`,{method:"DELETE"}),getObicoStatus:()=>Ee("/obico/status"),testObicoConnection:t=>Ee("/obico/test-connection",{method:"POST",body:JSON.stringify({url:t})}),sliceLibraryFile:(t,e)=>Ee(`/library/files/${t}/slice`,{method:"POST",body:JSON.stringify(e)}),sliceArchive:(t,e)=>Ee(`/archives/${t}/slice`,{method:"POST",body:JSON.stringify(e)}),getSliceJob:t=>Ee(`/slice-jobs/${t}`),getSlicerPresets:()=>Ee("/slicer/presets"),getLocalPresets:()=>Ee("/local-presets/"),getLocalPresetDetail:t=>Ee(`/local-presets/${t}`),importLocalPresets:t=>fetch(`${Sn}/local-presets/import`,{method:"POST",headers:Nn?{Authorization:`Bearer ${Nn}`}:{},body:t}).then(async e=>{if(!e.ok){const n=await e.json().catch(()=>({}));throw new Error(n.detail||`HTTP ${e.status}`)}return e.json()}),createLocalPreset:t=>Ee("/local-presets/",{method:"POST",body:JSON.stringify(t)}),updateLocalPreset:(t,e)=>Ee(`/local-presets/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteLocalPreset:t=>Ee(`/local-presets/${t}`,{method:"DELETE"}),refreshBaseProfileCache:()=>Ee("/local-presets/base-cache/refresh",{method:"POST"})},md={getInfo:()=>Ee("/discovery/info"),getStatus:()=>Ee("/discovery/status"),startDiscovery:(t=10)=>Ee(`/discovery/start?duration=${t}`,{method:"POST"}),stopDiscovery:()=>Ee("/discovery/stop",{method:"POST"}),getDiscoveredPrinters:()=>Ee("/discovery/printers"),startSubnetScan:(t,e=1)=>Ee("/discovery/scan",{method:"POST",body:JSON.stringify({subnet:t,timeout:e})}),getScanStatus:()=>Ee("/discovery/scan/status"),stopSubnetScan:()=>Ee("/discovery/scan/stop",{method:"POST"})},CF={getSettings:()=>Ee("/settings/virtual-printer"),getModels:()=>Ee("/settings/virtual-printer/models"),updateSettings:t=>{const e=new URLSearchParams;return t.enabled!==void 0&&e.set("enabled",String(t.enabled)),t.access_code!==void 0&&e.set("access_code",t.access_code),t.mode!==void 0&&e.set("mode",t.mode),t.model!==void 0&&e.set("model",t.model),t.target_printer_id!==void 0&&e.set("target_printer_id",String(t.target_printer_id)),t.remote_interface_ip!==void 0&&e.set("remote_interface_ip",t.remote_interface_ip),t.tailscale_disabled!==void 0&&e.set("tailscale_disabled",String(t.tailscale_disabled)),t.archive_name_source!==void 0&&e.set("archive_name_source",t.archive_name_source),Ee(`/settings/virtual-printer?${e.toString()}`,{method:"PUT"})}},LN={list:()=>Ee("/virtual-printers"),get:t=>Ee(`/virtual-printers/${t}`),create:t=>Ee("/virtual-printers",{method:"POST",body:JSON.stringify(t)}),update:(t,e)=>Ee(`/virtual-printers/${t}`,{method:"PUT",body:JSON.stringify(e)}),remove:t=>Ee(`/virtual-printers/${t}`,{method:"DELETE"}),getTailscaleStatus:()=>Ee("/virtual-printers/tailscale-status")},vx={list:()=>Ee("/pending-uploads/"),getCount:()=>Ee("/pending-uploads/count"),get:t=>Ee(`/pending-uploads/${t}`),archive:(t,e)=>Ee(`/pending-uploads/${t}/archive`,{method:"POST",body:JSON.stringify(e||{})}),discard:t=>Ee(`/pending-uploads/${t}`,{method:"DELETE"}),archiveAll:()=>Ee("/pending-uploads/archive-all",{method:"POST"}),discardAll:()=>Ee("/pending-uploads/discard-all",{method:"DELETE"})},Gk={checkUpdates:()=>Ee("/firmware/updates"),checkPrinterUpdate:t=>Ee(`/firmware/updates/${t}`),prepareUpload:(t,e)=>Ee(`/firmware/updates/${t}/prepare${e?`?version=${encodeURIComponent(e)}`:""}`),startUpload:(t,e)=>Ee(`/firmware/updates/${t}/upload${e?`?version=${encodeURIComponent(e)}`:""}`,{method:"POST"}),getUploadStatus:t=>Ee(`/firmware/updates/${t}/upload/status`)},Lx={getDebugLoggingState:()=>Ee("/support/debug-logging"),setDebugLogging:t=>Ee("/support/debug-logging",{method:"POST",body:JSON.stringify({enabled:t})}),downloadSupportBundle:async()=>{const t={};Nn&&(t.Authorization=`Bearer ${Nn}`);const e=await fetch(`${Sn}/support/bundle`,{headers:t});if(!e.ok){const l=await e.json().catch(()=>({}));throw new Error(l.detail||`HTTP ${e.status}`)}const n=e.headers.get("Content-Disposition"),r=Tf(n)||"bambuddy-support.zip",i=await e.blob(),s=window.URL.createObjectURL(i),o=document.createElement("a");o.href=s,o.download=r,document.body.appendChild(o),o.click(),document.body.removeChild(o),window.URL.revokeObjectURL(s)},getLogs:t=>{const e=new URLSearchParams;t?.limit&&e.set("limit",t.limit.toString()),t?.level&&e.set("level",t.level),t?.search&&e.set("search",t.search);const n=e.toString();return Ee(`/support/logs${n?`?${n}`:""}`)},clearLogs:()=>Ee("/support/logs",{method:"DELETE"})},Wr={getDevices:()=>Ee("/spoolbuddy/devices"),deleteDevice:t=>Ee(`/spoolbuddy/devices/${t}`,{method:"DELETE"}),tare:t=>Ee(`/spoolbuddy/devices/${t}/calibration/tare`,{method:"POST",body:"{}"}),getCalibration:t=>Ee(`/spoolbuddy/devices/${t}/calibration`),setCalibrationFactor:(t,e,n,r)=>Ee(`/spoolbuddy/devices/${t}/calibration/set-factor`,{method:"POST",body:JSON.stringify({known_weight_grams:e,raw_adc:n,tare_raw_adc:r})}),updateSpoolWeight:(t,e)=>Ee("/spoolbuddy/scale/update-spool-weight",{method:"POST",body:JSON.stringify({spool_id:t,weight_grams:e})}),updateDisplay:(t,e,n)=>Ee(`/spoolbuddy/devices/${t}/display`,{method:"PUT",body:JSON.stringify({brightness:e,blank_timeout:n})}),updateSystemConfig:(t,e,n)=>Ee(`/spoolbuddy/devices/${t}/system/config`,{method:"POST",body:JSON.stringify({backend_url:e,...n?{api_key:n}:{}})}),checkDaemonUpdate:t=>Ee(`/spoolbuddy/devices/${t}/update-check`),triggerUpdate:t=>Ee(`/spoolbuddy/devices/${t}/update`,{method:"POST",body:"{}"}),getSSHPublicKey:()=>Ee("/spoolbuddy/ssh/public-key"),writeTag:(t,e)=>Ee("/spoolbuddy/nfc/write-tag",{method:"POST",body:JSON.stringify({device_id:t,spool_id:e})}),cancelWrite:t=>Ee(`/spoolbuddy/devices/${t}/cancel-write`,{method:"POST",body:"{}"}),systemCommand:(t,e)=>Ee(`/spoolbuddy/devices/${t}/system/command`,{method:"POST",body:JSON.stringify({command:e})}),queueDiagnostics:(t,e)=>Ee(`/spoolbuddy/diagnostics/${t}/run?diagnostic=${e}`,{method:"POST",body:"{}"}),getDiagnosticResult:(t,e)=>Ee(`/spoolbuddy/diagnostics/${t}/result?diagnostic=${e}`,{method:"GET"})},zM={submit:t=>Ee("/bug-report/submit",{method:"POST",body:JSON.stringify(t)}),startLogging:()=>Ee("/bug-report/start-logging",{method:"POST"}),stopLogging:t=>Ee(`/bug-report/stop-logging?was_debug=${t}`,{method:"POST"})},wJ=w.createContext(void 0);function $ye({children:t}){const[e,n]=w.useState(()=>{const T=localStorage.getItem("theme-mode"),F=localStorage.getItem("theme");return T||F||"dark"}),[r,i]=w.useState(()=>localStorage.getItem("dark-style")||"classic"),[s,o]=w.useState(()=>localStorage.getItem("dark-background")||"neutral"),[l,c]=w.useState(()=>localStorage.getItem("dark-accent")||"green"),[d,u]=w.useState(()=>localStorage.getItem("light-style")||"classic"),[m,p]=w.useState(()=>localStorage.getItem("light-background")||"neutral"),[f,x]=w.useState(()=>localStorage.getItem("light-accent")||"green");w.useEffect(()=>{oe.getSettings().then(T=>{T.dark_style&&(i(T.dark_style),localStorage.setItem("dark-style",T.dark_style)),T.dark_background&&(o(T.dark_background),localStorage.setItem("dark-background",T.dark_background)),T.dark_accent&&(c(T.dark_accent),localStorage.setItem("dark-accent",T.dark_accent)),T.light_style&&(u(T.light_style),localStorage.setItem("light-style",T.light_style)),T.light_background&&(p(T.light_background),localStorage.setItem("light-background",T.light_background)),T.light_accent&&(x(T.light_accent),localStorage.setItem("light-accent",T.light_accent))}).catch(()=>{})},[]),w.useEffect(()=>{const T=document.documentElement;T.classList.remove("dark","style-classic","style-glow","style-vibrant","bg-neutral","bg-warm","bg-cool","bg-oled","bg-slate","bg-forest","accent-green","accent-teal","accent-blue","accent-orange","accent-purple","accent-red"),e==="dark"?(T.classList.add("dark"),T.classList.add(`style-${r}`),T.classList.add(`bg-${s}`),T.classList.add(`accent-${l}`)):(T.classList.add(`style-${d}`),T.classList.add(`bg-${m}`),T.classList.add(`accent-${f}`)),localStorage.setItem("theme-mode",e),localStorage.removeItem("theme")},[e,r,s,l,d,m,f]);const v=()=>n(T=>T==="dark"?"light":"dark"),b=T=>n(T),g=T=>{i(T),localStorage.setItem("dark-style",T),oe.updateSettings({dark_style:T}).catch(()=>{})},S=T=>{o(T),localStorage.setItem("dark-background",T),oe.updateSettings({dark_background:T}).catch(()=>{})},N=T=>{c(T),localStorage.setItem("dark-accent",T),oe.updateSettings({dark_accent:T}).catch(()=>{})},P=T=>{u(T),localStorage.setItem("light-style",T),oe.updateSettings({light_style:T}).catch(()=>{})},C=T=>{p(T),localStorage.setItem("light-background",T),oe.updateSettings({light_background:T}).catch(()=>{})},A=T=>{x(T),localStorage.setItem("light-accent",T),oe.updateSettings({light_accent:T}).catch(()=>{})};return a.jsx(wJ.Provider,{value:{mode:e,darkStyle:r,darkBackground:s,darkAccent:l,lightStyle:d,lightBackground:m,lightAccent:f,toggleMode:v,setMode:b,setDarkStyle:g,setDarkBackground:S,setDarkAccent:N,setLightStyle:P,setLightBackground:C,setLightAccent:A},children:t})}function Gg(){const t=w.useContext(wJ);if(!t)throw new Error("useTheme must be used within ThemeProvider");return t}const aO=w.createContext("normal");function Vye({density:t,children:e}){return a.jsx(aO.Provider,{value:t,children:e})}function wt({children:t,className:e="",onClick:n,onContextMenu:r,...i}){return a.jsx("div",{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary card-shadow ${e}`,onClick:n,onContextMenu:r,...i,children:t})}function pn({children:t,className:e="",dense:n}){const r=w.useContext(aO)==="dense",s=n??r?"px-4 py-2.5":"px-6 py-4";return a.jsx("div",{className:`${s} border-b border-bambu-dark-tertiary ${e}`,children:t})}function St({children:t,className:e="",dense:n}){const r=w.useContext(aO)==="dense",s=n??r?"p-4":"p-6";return a.jsx("div",{className:`${s} ${e}`,children:t})}function Gye(t,e,n){return[{category:"Navigation",items:t?t.slice(0,9).map((i,s)=>({keys:[String(s+1)],description:i.type==="external"?`Open ${i.label}`:`Go to ${i.labelKey?n(i.labelKey):i.label}`,isExternal:i.type==="external"})):e?e.map((i,s)=>({keys:[String(s+1)],description:`Go to ${n(i.labelKey)}`,isExternal:!1})):[{keys:["1"],description:"Go to Printers",isExternal:!1},{keys:["2"],description:"Go to Archives",isExternal:!1},{keys:["3"],description:"Go to Queue",isExternal:!1},{keys:["4"],description:"Go to Statistics",isExternal:!1},{keys:["5"],description:"Go to Cloud Profiles",isExternal:!1},{keys:["6"],description:"Go to Settings",isExternal:!1}]},{category:"Archives",items:[{keys:["/"],description:"Focus search",isExternal:!1},{keys:["U"],description:"Open upload modal",isExternal:!1},{keys:["Esc"],description:"Clear selection / blur input",isExternal:!1},{keys:["Right-click"],description:"Context menu on cards",isExternal:!1}]},{category:"K-Profiles",items:[{keys:["R"],description:"Refresh profiles",isExternal:!1},{keys:["N"],description:"New profile",isExternal:!1},{keys:["Esc"],description:"Exit selection mode",isExternal:!1}]},{category:"General",items:[{keys:["?"],description:"Show this help",isExternal:!1}]}]}function QH({children:t}){return a.jsx("kbd",{className:"px-2 py-1 text-xs font-mono bg-bambu-dark border border-bambu-dark-tertiary rounded text-white",children:t})}function Wye({onClose:t,navItems:e,sidebarItems:n}){const{t:r}=_t(),i=Gye(n,e,r);return w.useEffect(()=>{const s=o=>{o.key==="Escape"&&t()};return window.addEventListener("keydown",s),()=>window.removeEventListener("keydown",s)},[t]),a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4",onClick:t,children:a.jsx(wt,{className:"w-full max-w-md",onClick:s=>s.stopPropagation(),children:a.jsxs(St,{className:"p-0",children:[a.jsxs("div",{className:"flex items-center justify-between p-4 border-b border-bambu-dark-tertiary",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(yF,{className:"w-5 h-5 text-bambu-green"}),a.jsx("h2",{className:"text-xl font-semibold text-white",children:"Keyboard Shortcuts"})]}),a.jsx("button",{onClick:t,className:"text-bambu-gray hover:text-white transition-colors",children:a.jsx(Bt,{className:"w-5 h-5"})})]}),a.jsx("div",{className:"p-4 space-y-6 max-h-[60vh] overflow-y-auto",children:i.map(s=>a.jsxs("div",{children:[a.jsx("h3",{className:"text-sm font-medium text-bambu-gray mb-3",children:s.category}),a.jsx("div",{className:"space-y-2",children:s.items.map(o=>a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("span",{className:"text-white text-sm flex items-center gap-1.5",children:[o.description,o.isExternal&&a.jsx(Ar,{className:"w-3 h-3 text-bambu-gray"})]}),a.jsx("div",{className:"flex gap-1",children:o.keys.map(l=>a.jsx(QH,{children:l},l))})]},o.description))})]},s.category))}),a.jsx("div",{className:"p-4 border-t border-bambu-dark-tertiary",children:a.jsxs("p",{className:"text-xs text-bambu-gray text-center",children:["Press ",a.jsx(QH,{children:"Esc"})," or click outside to close"]})})]})})})}function De({variant:t="primary",size:e="md",className:n="",children:r,...i}){const s="inline-flex items-center justify-center font-medium rounded-lg transition-colors focus:outline-none focus:ring-2 focus:ring-offset-2 focus:ring-offset-bambu-dark disabled:opacity-50 disabled:cursor-not-allowed",o={primary:"bg-bambu-green hover:bg-bambu-green-light text-white focus:ring-bambu-green",secondary:"bg-bambu-dark-tertiary hover:bg-bambu-gray-dark text-white focus:ring-bambu-gray",danger:"bg-red-600 hover:bg-red-700 text-white focus:ring-red-500",ghost:"bg-transparent hover:bg-bambu-dark-tertiary text-bambu-gray-light hover:text-white"},l={sm:"px-3 py-1.5 text-sm gap-1.5 min-h-[44px] md:min-h-0",md:"px-4 py-2 text-sm gap-2 min-h-[44px] md:min-h-0",lg:"px-6 py-3 text-base gap-2 min-h-[48px] md:min-h-0"};return a.jsx("button",{className:`${s} ${o[t]} ${l[e]} ${n}`,...i,children:r})}function yn({title:t,message:e,confirmText:n,cancelText:r,cancelVariant:i,cardClassName:s,variant:o="default",isLoading:l=!1,loadingText:c,onConfirm:d,onCancel:u}){const{t:m}=_t(),p=n??m("common.confirm"),f=r??m("common.cancel"),x=c??m("common.loading");w.useEffect(()=>{const g=S=>{S.key==="Escape"&&!l&&u()};return window.addEventListener("keydown",g),()=>window.removeEventListener("keydown",g)},[u,l]);const b={danger:{icon:"text-red-400",button:"bg-red-500 hover:bg-red-600"},warning:{icon:"text-yellow-400",button:"bg-yellow-500 hover:bg-yellow-600 text-black"},default:{icon:"text-bambu-green",button:"bg-bambu-green hover:bg-bambu-green-dark"}}[o];return a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4",onClick:l?void 0:u,children:a.jsx(wt,{className:`w-full max-w-md ${s??""}`,onClick:g=>g.stopPropagation(),children:a.jsxs(St,{className:"p-6",children:[a.jsxs("div",{className:"flex items-start gap-4",children:[a.jsx("div",{className:`p-2 rounded-full bg-bambu-dark ${b.icon}`,children:a.jsx(Cn,{className:"w-6 h-6"})}),a.jsxs("div",{className:"flex-1",children:[a.jsx("h3",{className:"text-lg font-semibold text-white mb-2",children:t}),a.jsx("p",{className:"text-bambu-gray text-sm whitespace-pre-line",children:e})]})]}),a.jsxs("div",{className:"flex gap-3 mt-6",children:[a.jsx(De,{variant:i??"secondary",onClick:u,className:"flex-1",disabled:l,children:f}),a.jsx(De,{onClick:d,className:`flex-1 ${b.button}`,disabled:l,children:l?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-4 h-4 mr-2 animate-spin"}),x]}):p})]})]})})})}function Kye({plug:t}){const e=tn(),[n,r]=w.useState(null),{data:i,isLoading:s}=Qe({queryKey:["smart-plug-status",t.id],queryFn:()=>oe.getSmartPlugStatus(t.id),refetchInterval:1e4}),o=ot({mutationFn:f=>oe.controlSmartPlug(t.id,f),onSuccess:()=>{e.invalidateQueries({queryKey:["smart-plug-status",t.id]})}}),l=i?.state==="ON",c=t.plug_type==="mqtt"&&i?.energy?.power!==null&&i?.energy?.power!==void 0,d=(i?.reachable??!1)||c,u=o.isPending,m=t.plug_type==="mqtt",p=()=>{n&&(o.mutate(n),r(null))};return a.jsxs(a.Fragment,{children:[a.jsxs("div",{className:"flex items-center justify-between py-2 px-3 hover:bg-bambu-dark-tertiary rounded-lg transition-colors",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("div",{className:`p-1.5 rounded ${m?d?"bg-teal-500/20":"bg-red-500/20":d?l?"bg-bambu-green/20":"bg-bambu-dark":"bg-red-500/20"}`,children:m?a.jsx(eO,{className:`w-4 h-4 ${d?"text-teal-400":"text-red-400"}`}):a.jsx(tc,{className:`w-4 h-4 ${d?l?"text-bambu-green":"text-bambu-gray":"text-red-400"}`})}),a.jsxs("div",{children:[a.jsx("p",{className:"text-sm text-white font-medium",children:t.name}),a.jsx("div",{className:"flex items-center gap-1 text-xs",children:s?a.jsx(mt,{className:"w-3 h-3 text-bambu-gray animate-spin"}):m?d?a.jsxs(a.Fragment,{children:[a.jsx(cc,{className:"w-3 h-3 text-teal-400"}),a.jsxs("span",{className:"text-teal-400",children:[Math.round(i?.energy?.power??0),"W"]}),a.jsx("span",{className:"text-bambu-gray mx-1",children:"|"}),a.jsx(pl,{className:"w-3 h-3 text-bambu-gray"}),a.jsx("span",{className:"text-bambu-gray",children:"Monitor"})]}):a.jsxs(a.Fragment,{children:[a.jsx(qd,{className:"w-3 h-3 text-status-error"}),a.jsx("span",{className:"text-status-error",children:"Waiting"})]}):d?a.jsxs(a.Fragment,{children:[a.jsx(cp,{className:"w-3 h-3 text-status-ok"}),a.jsx("span",{className:l?"text-status-ok":"text-bambu-gray",children:i?.state||"Unknown"}),i?.energy?.power!==null&&i?.energy?.power!==void 0&&a.jsxs(a.Fragment,{children:[a.jsx("span",{className:"text-bambu-gray mx-1",children:"|"}),a.jsx(cc,{className:"w-3 h-3 text-yellow-400"}),a.jsxs("span",{className:"text-yellow-400",children:[Math.round(i.energy.power),"W"]})]})]}):a.jsxs(a.Fragment,{children:[a.jsx(qd,{className:"w-3 h-3 text-status-error"}),a.jsx("span",{className:"text-status-error",children:"Offline"})]})})]})]}),!m&&a.jsxs("div",{className:"flex gap-1",children:[a.jsx("button",{onClick:()=>r("on"),disabled:!d||u,className:`p-1.5 rounded transition-colors ${l?"bg-bambu-green text-white":"bg-bambu-dark text-bambu-gray hover:text-white"} disabled:opacity-50 disabled:cursor-not-allowed`,title:"Turn On",children:u?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Jd,{className:"w-4 h-4"})}),a.jsx("button",{onClick:()=>r("off"),disabled:!d||u,className:`p-1.5 rounded transition-colors ${!l&&d?"bg-bambu-dark-tertiary text-white":"bg-bambu-dark text-bambu-gray hover:text-white"} disabled:opacity-50 disabled:cursor-not-allowed`,title:"Turn Off",children:u?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(dS,{className:"w-4 h-4"})})]})]}),n&&a.jsx(yn,{title:`Turn ${n==="on"?"On":"Off"} Smart Plug`,message:`Are you sure you want to turn ${n==="on"?"on":"off"} "${t.name}"?`,confirmText:n==="on"?"Turn On":"Turn Off",variant:n==="off"?"warning":"default",onConfirm:p,onCancel:()=>r(null)})]})}function JH({onClose:t}){const{t:e}=_t(),{data:n,isLoading:r}=Qe({queryKey:["smart-plugs"],queryFn:oe.getSmartPlugs}),i=n?.filter(s=>s.show_in_switchbar)||[];return a.jsxs("div",{className:"absolute bottom-full left-0 mb-2 w-72 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-xl z-50",onMouseLeave:t,children:[a.jsx("div",{className:"px-4 py-3 border-b border-bambu-dark-tertiary",children:a.jsxs("h3",{className:"text-sm font-semibold text-white flex items-center gap-2",children:[a.jsx(tc,{className:"w-4 h-4 text-bambu-green"}),"Smart Switches"]})}),a.jsx("div",{className:"p-2 max-h-80 overflow-y-auto",children:r?a.jsx("div",{className:"flex items-center justify-center py-8",children:a.jsx(mt,{className:"w-6 h-6 text-bambu-gray animate-spin"})}):i.length===0?a.jsxs("div",{className:"text-center py-6 px-4",children:[a.jsx(tc,{className:"w-8 h-8 text-bambu-gray mx-auto mb-2"}),a.jsx("p",{className:"text-sm text-bambu-gray",children:e("smartPlugs.noSwitchesInSwitchbar")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:e("smartPlugs.enableSwitchbarHint")})]}):a.jsx("div",{className:"space-y-1",children:i.map(s=>a.jsx(Kye,{plug:s},s.id))})})]})}const SJ=[{name:"globe",icon:qs},{name:"link",icon:Ty},{name:"external-link",icon:Ar},{name:"book",icon:ofe},{name:"file-text",icon:Ns},{name:"home",icon:iS},{name:"star",icon:bg},{name:"heart",icon:pbe},{name:"bookmark",icon:cfe},{name:"shopping-cart",icon:mJ},{name:"music",icon:SF},{name:"video",icon:FN},{name:"image",icon:Bd},{name:"camera",icon:Qx},{name:"map",icon:Bbe},{name:"compass",icon:ige},{name:"coffee",icon:Jfe},{name:"gift",icon:Zge},{name:"wrench",icon:xg},{name:"zap",icon:cc},{name:"cloud",icon:qg},{name:"database",icon:Jl},{name:"folder",icon:iJ},{name:"mail",icon:xm},{name:"phone",icon:mxe},{name:"user",icon:vm},{name:"users",icon:Ku},{name:"server",icon:Pf},{name:"terminal",icon:gJ},{name:"code",icon:Py}];function nT(t){return SJ.find(n=>n.name===t)?.icon||Ty}function Xye({value:t,onChange:e}){const[n,r]=w.useState(!1),i=nT(t);return a.jsxs("div",{className:"relative",children:[a.jsxs("button",{type:"button",onClick:()=>r(!n),className:"flex items-center gap-2 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white hover:border-bambu-gray focus:border-bambu-green focus:outline-none w-full",children:[a.jsx(i,{className:"w-5 h-5"}),a.jsx("span",{className:"text-sm text-bambu-gray flex-1 text-left",children:t})]}),n&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-40",onClick:()=>r(!1)}),a.jsx("div",{className:"absolute z-50 mt-1 w-full max-h-64 overflow-y-auto bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg",children:a.jsx("div",{className:"grid grid-cols-5 gap-1 p-2",children:SJ.map(({name:s,icon:o})=>a.jsx("button",{type:"button",onClick:()=>{e(s),r(!1)},className:`p-2 rounded-lg transition-colors flex items-center justify-center ${t===s?"bg-bambu-green text-white":"hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white"}`,title:s,children:a.jsx(o,{className:"w-5 h-5"})},s))})})]})]})}const ZH=1144;function Yye(){const[t,e]=w.useState(()=>typeof window<"u"?window.innerWidth<ZH:!1);return w.useEffect(()=>{const n=window.matchMedia(`(max-width: ${ZH-1}px)`),r=i=>{e(i.matches)};return e(n.matches),n.addEventListener("change",r),()=>n.removeEventListener("change",r)},[]),t}let iO={},_J=0;const PF=new Set;function Qye(t){const e={};for(const[n,r]of Object.entries(t)){if(!n||!r)continue;const i=n.replace("#","").toLowerCase().slice(0,6);i.length===6&&(e[i]=r)}iO=e,_J+=1;for(const n of Array.from(PF))n()}function Jye(t){return PF.add(t),()=>{PF.delete(t)}}function e6(){return _J}function t6(t){if(!t||t.length<6)return"Unknown";const e=t.replace("#",""),n=parseInt(e.substring(0,2),16),r=parseInt(e.substring(2,4),16),i=parseInt(e.substring(4,6),16),s=Math.max(n,r,i)/255,o=Math.min(n,r,i)/255,l=(s+o)/2;let c=0,d=0;if(s!==o){const u=s-o;d=l>.5?u/(2-s-o):u/(s+o);const m=n/255,p=r/255,f=i/255;s===m?c=((p-f)/u+(p<f?6:0))/6:s===p?c=((f-m)/u+2)/6:c=((m-p)/u+4)/6}return c=c*360,l<.15?"Black":l>.85?"White":d<.15?l<.4?"Dark Gray":l>.6?"Light Gray":"Gray":c>=15&&c<45&&l<.45||c>=45&&c<70&&l<.4?"Brown":c<15||c>=345?"Red":c<45?"Orange":c<70?"Yellow":c<150?"Green":c<200?"Cyan":c<260?"Blue":c<290?"Purple":"Pink"}function nc(t){if(!t)return t6(t);const e=t.replace("#","").toLowerCase().substring(0,6),n=iO[e];return n||t6(t)}function rT(t,e){if(t&&!/^[A-Z]\d+-[A-Z]\d+$/.test(t))return t;if(e&&e.length>=6){const n=e.substring(0,6).toLowerCase(),r=iO[n];if(r)return r}return null}function sO(t){if(!t||t==="00000000"||t.length<6)return null;const e=t.slice(0,2),n=t.slice(2,4),r=t.slice(4,6),i=t.length>=8?parseInt(t.slice(6,8),16)/255:1;return i===0?null:`rgba(${parseInt(e,16)}, ${parseInt(n,16)}, ${parseInt(r,16)}, ${i})`}function kJ(t){if(!t||t.length<6)return!1;const e=t.replace("#",""),n=parseInt(e.slice(0,2),16),r=parseInt(e.slice(2,4),16),i=parseInt(e.slice(4,6),16);return(.299*n+.587*r+.114*i)/255>.6}function NJ(){return w.useSyncExternalStore(Jye,e6,e6)}const CJ=w.createContext(void 0);function Zye({children:t}){const[e,n]=w.useState(null),[r,i]=w.useState(!1),[s,o]=w.useState(!1),[l,c]=w.useState(!0),d=w.useRef(!1),u=w.useRef(!0),m=async()=>{try{const T=new URLSearchParams(window.location.search),F=T.get("token");if(F){jh(F,"session"),T.delete("token");const E=T.toString(),$=window.location.pathname+(E?`?${E}`:"")+window.location.hash;window.history.replaceState({},"",$)}const k=await oe.getAuthStatus();if(!u.current)return;if(i(k.auth_enabled),o(k.requires_setup),k.auth_enabled){const E=wm();if(E)try{const $=await oe.getCurrentUser();if(!u.current)return;n($),F&&E===F&&jh(F,"persistent")}catch{if(jh(null),!u.current)return;n(null)}else n(null)}else n(null)}catch{if(!u.current)return;i(!1),n(null)}finally{u.current&&c(!1)}};w.useEffect(()=>(u.current=!0,m(),()=>{u.current=!1}),[]),w.useEffect(()=>{if(!l&&s&&!r){const T=window.location.pathname;T!=="/setup"&&!T.startsWith("/camera/")&&!d.current&&(d.current=!0,window.location.href="/setup")}else s||(d.current=!1)},[l,s,r]);const p=async(T,F,k="session")=>{const E=await oe.login({username:T,password:F});return!E.requires_2fa&&E.access_token&&(jh(E.access_token,k),await m()),E},f=(T,F,k="session")=>{jh(T,k),n(F),i(!0)},x=()=>{jh(null),n(null),oe.logout().catch(()=>{}),window.location.href="/login"},v=async()=>{if(r&&wm())try{const T=await oe.getCurrentUser();u.current&&n(T)}catch{jh(null),u.current&&n(null)}},b=async()=>{await m()},g=w.useMemo(()=>new Set(e?.permissions??[]),[e?.permissions]),S=w.useMemo(()=>r?e?.is_admin??!1:!0,[r,e?.is_admin]),N=w.useCallback(T=>!r||S?!0:g.has(T),[r,S,g]),P=w.useCallback((...T)=>!r||S?!0:T.some(F=>g.has(F)),[r,S,g]),C=w.useCallback((...T)=>!r||S?!0:T.every(F=>g.has(F)),[r,S,g]),A=w.useCallback((T,F,k)=>{if(!r||S)return!0;const E=`${T}:${F}_all`,$=`${T}:${F}_own`;return g.has(E)?!0:g.has($)?k==null?!1:k===e?.id:!1},[r,S,g,e?.id]);return a.jsx(CJ.Provider,{value:{user:e,authEnabled:r,requiresSetup:s,loading:l,isAdmin:S,login:p,loginWithToken:f,logout:x,refreshUser:v,refreshAuth:b,hasPermission:N,hasAnyPermission:P,hasAllPermissions:C,canModify:A},children:t})}function gr(){const t=w.useContext(CJ);if(t===void 0)throw new Error("useAuth must be used within an AuthProvider");return t}function Yi(t){if(!Number.isFinite(t)||t<=0)return"0 B";const e=["B","KB","MB","GB","TB"],n=1024,r=Math.floor(Math.log(t)/Math.log(n)),i=t/Math.pow(n,r);return r===0?`${i} ${e[r]}`:`${i.toFixed(1)} ${e[r]}`}const PJ=w.createContext(void 0);function rn(){const t=w.useContext(PJ);if(!t)throw new Error("useToast must be used within a ToastProvider");return t}const n6={success:a.jsx(wr,{className:"w-5 h-5 text-green-400"}),error:a.jsx(Da,{className:"w-5 h-5 text-red-400"}),warning:a.jsx(Oa,{className:"w-5 h-5 text-yellow-400"}),info:a.jsx(Cs,{className:"w-5 h-5 text-blue-400"}),loading:a.jsx(mt,{className:"w-5 h-5 text-bambu-green animate-spin"})},eve={success:"bg-green-500/10 border-green-500/30",error:"bg-red-500/10 border-red-500/30",warning:"bg-yellow-500/10 border-yellow-500/30",info:"bg-blue-500/10 border-blue-500/30",loading:"bg-bambu-green/10 border-bambu-green/30"};function tve({children:t}){const{t:e}=_t(),[n,r]=w.useState([]),[i,s]=w.useState(!1),[o,l]=w.useState(!1),[c,d]=w.useState(new Set),u=w.useRef(new Map),m="background-dispatch",p=w.useRef(null),f=w.useRef(!0);w.useEffect(()=>{f.current=!0;const S=u.current;return()=>{f.current=!1,S.forEach(N=>clearTimeout(N)),S.clear()}},[]);const x=w.useCallback((S,N="success")=>{if(!f.current)return;const P=Math.random().toString(36).substr(2,9);r(A=>[...A,{id:P,message:S,type:N}]);const C=setTimeout(()=>{f.current&&(r(A=>A.filter(T=>T.id!==P)),u.current.delete(P))},3e3);u.current.set(P,C)},[]),v=w.useCallback((S,N,P="info")=>{f.current&&r(C=>C.find(T=>T.id===S)?C.map(T=>T.id===S?{...T,message:N,type:P,persistent:!0}:T):[...C,{id:S,message:N,type:P,persistent:!0}])},[]),b=w.useCallback(S=>{if(!f.current)return;const N=u.current.get(S);N&&(clearTimeout(N),u.current.delete(S)),r(P=>P.filter(C=>C.id!==S))},[]),g=w.useCallback(async S=>{d(N=>{const P=new Set(N);return P.add(S),P});try{const N=await oe.cancelBackgroundDispatchJob(S);x(N.status==="cancelling"?e("backgroundDispatch.toast.cancellingUpload"):e("backgroundDispatch.toast.cancelled"),"info")}catch(N){const P=N instanceof Error?N.message:e("backgroundDispatch.toast.cancelFailed");x(P,"error")}finally{d(N=>{const P=new Set(N);return P.delete(S),P})}},[x,e]);return w.useEffect(()=>{const S=(C,A,T)=>{const F=C.findIndex(E=>E.jobId===A);if(F===-1)return[...C,{jobId:A,...T}];const k=[...C];return k[F]={...k[F],...T},k},N=C=>{switch(C){case"failed":return 0;case"processing":return 1;case"dispatched":return 2;case"completed":return 3;case"cancelled":return 4}},P=C=>{const A=C.detail||{},T=A.total??0,F=A.dispatched??0,k=A.processing??0,E=A.completed??0,$=A.failed??0,z=F+k>0,X=T>0&&E+$>=T&&!z,R=A.recent_event?.status;if(R==="completed"&&E>0){const ne=`first-complete:${E}:${$}`;if(p.current!==ne){p.current=ne;const re=T-E-$,J=re>0?e("backgroundDispatch.toast.printStartedRemaining",{completed:E,remaining:re}):$>0?e("backgroundDispatch.toast.completeWithFailures",{completed:E,failed:$}):e("backgroundDispatch.toast.completeSuccess",{completed:E});r(se=>{const K={id:m,message:J,type:$>0?"warning":"success",persistent:!0};return se.find(pe=>pe.id===m)?se.map(pe=>pe.id===m?K:pe):[...se,K]});const ue=u.current.get(m);ue&&clearTimeout(ue);const ie=setTimeout(()=>{f.current&&(r(se=>se.filter(K=>K.id!==m)),u.current.delete(m),p.current=null)},3e3);u.current.set(m,ie)}return}if(z){p.current=null,r(ne=>{const J=ne.find(B=>B.id===m)?.dispatchData?.jobs||[],ue=(A.dispatched_jobs||[]).map(B=>({jobId:B.job_id,sourceName:B.source_name||e("backgroundDispatch.unknownFile"),printerName:B.printer_name||e("backgroundDispatch.unknownPrinter"),status:"dispatched"})),se=(A.active_jobs&&A.active_jobs.length>0?A.active_jobs:A.active_job?.job_id?[A.active_job]:[]).filter(B=>typeof B.job_id=="number").map(B=>({jobId:B.job_id,sourceName:B.source_name||e("backgroundDispatch.unknownFile"),printerName:B.printer_name||e("backgroundDispatch.unknownPrinter"),status:"processing",message:B.message,uploadBytes:B.upload_bytes,uploadTotalBytes:B.upload_total_bytes,uploadProgressPct:B.upload_progress_pct})),K=new Set([...ue,...se].map(B=>B.jobId)),ae=J.filter(B=>!K.has(B.jobId)&&["completed","failed","cancelled"].includes(B.status));let pe=[...ue,...se,...ae];if(A.recent_event?.job_id&&A.recent_event?.status){const B=A.recent_event.status,Y=B==="cancelled"?"cancelled":B==="cancelling"?"processing":B,D=A.recent_event.source_name||e("backgroundDispatch.unknownFile"),M=A.recent_event.printer_name||e("backgroundDispatch.unknownPrinter");pe=S(pe,A.recent_event.job_id,{status:Y,sourceName:D,printerName:M,message:A.recent_event.message})}se.forEach(B=>{pe=S(pe,B.jobId,{status:"processing",sourceName:B.sourceName,printerName:B.printerName,message:B.message,uploadBytes:B.uploadBytes,uploadTotalBytes:B.uploadTotalBytes,uploadProgressPct:B.uploadProgressPct})});const be={total:T,dispatched:F,processing:k,completed:E,failed:$,jobs:[...pe].sort((B,Y)=>{const D=N(B.status)-N(Y.status);return D!==0?D:B.jobId-Y.jobId})};return ne.find(B=>B.id===m)?ne.map(B=>B.id===m?{...B,message:e("backgroundDispatch.startingPrints"),type:"loading",persistent:!0,dispatchData:be}:B):[...ne,{id:m,message:e("backgroundDispatch.startingPrints"),type:"loading",persistent:!0,dispatchData:be}]});return}if(X){const ne=`${E}:${$}`;if(p.current===ne)return;p.current=ne;const re=$>0?e("backgroundDispatch.toast.completeWithFailures",{completed:E,failed:$}):e("backgroundDispatch.toast.completeSuccess",{completed:E});r(ie=>{const se={id:m,message:re,type:$>0?"warning":"success",persistent:!0};return ie.find(ae=>ae.id===m)?ie.map(ae=>ae.id===m?se:ae):[...ie,se]});const J=u.current.get(m);J&&clearTimeout(J);const ue=setTimeout(()=>{r(ie=>ie.filter(se=>se.id!==m)),u.current.delete(m),p.current=null},3e3);u.current.set(m,ue);return}if(!z&&R&&["cancelled","failed","completed","idle"].includes(R)&&(r(ne=>ne.filter(re=>re.id!==m)),p.current=null),A.recent_event?.status==="idle"&&!z&&(r(ne=>ne.filter(re=>re.id!==m)),p.current=null),z||d(new Set),A.dispatched_jobs){const ne=new Set(A.dispatched_jobs.map(re=>re.job_id));d(re=>{const J=new Set;return re.forEach(ue=>{ne.has(ue)&&J.add(ue)}),J})}};return window.addEventListener("background-dispatch",P),()=>window.removeEventListener("background-dispatch",P)},[e]),a.jsxs(PJ.Provider,{value:{showToast:x,showPersistentToast:v,dismissToast:b,setViewportSuppressed:l},children:[t,a.jsx("div",{className:`fixed bottom-4 right-20 z-[60] flex flex-col items-end gap-2 ${o?"hidden":""}`,children:n.map(S=>a.jsx("div",{className:`rounded-lg border shadow-lg backdrop-blur-sm animate-slide-in ${eve[S.type]} ${S.dispatchData?"w-[420px] p-3":"flex items-center gap-3 px-4 py-3"}`,children:S.dispatchData?a.jsxs(a.Fragment,{children:[a.jsxs("div",{className:"flex items-start justify-between gap-3",children:[a.jsxs("div",{className:"flex items-start gap-2",children:[n6[S.type],a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm font-medium",children:e("backgroundDispatch.startingPrints")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-0.5",children:e("backgroundDispatch.progressSummary",{complete:S.dispatchData.completed+S.dispatchData.failed,total:S.dispatchData.total,dispatched:S.dispatchData.dispatched,processing:S.dispatchData.processing})})]})]}),a.jsxs("div",{className:"flex items-center gap-1",children:[a.jsx("button",{onClick:()=>s(N=>!N),className:"text-bambu-gray hover:text-white transition-colors","aria-label":e(i?"backgroundDispatch.expandDetails":"backgroundDispatch.collapseDetails"),children:i?a.jsx(lc,{className:"w-4 h-4"}):a.jsx(zn,{className:"w-4 h-4"})}),a.jsx("button",{onClick:()=>b(S.id),className:"text-bambu-gray hover:text-white transition-colors","aria-label":e("backgroundDispatch.dismissToast"),children:a.jsx(Bt,{className:"w-4 h-4"})})]})]}),!i&&a.jsx("div",{className:"mt-3 space-y-2 max-h-64 overflow-y-auto pr-1",children:S.dispatchData.jobs.map(N=>{const P={dispatched:15,processing:60,completed:100,failed:100,cancelled:100},C=N.status==="processing"&&typeof N.uploadProgressPct=="number"&&N.uploadProgressPct>=99.9,A={dispatched:"bg-bambu-gray/60",processing:"bg-bambu-green",completed:"bg-green-500",failed:"bg-red-500",cancelled:"bg-yellow-500"};return a.jsxs("div",{className:"rounded border border-white/10 bg-black/15 p-2",children:[a.jsxs("div",{className:"flex items-center justify-between gap-2",children:[a.jsx("span",{className:"text-xs text-white truncate",title:N.sourceName,children:N.sourceName}),a.jsxs("div",{className:"flex items-center gap-2",children:[(N.status==="dispatched"||N.status==="processing")&&a.jsx("button",{onClick:()=>{g(N.jobId)},disabled:c.has(N.jobId),className:"text-[11px] text-red-300 hover:text-red-200 disabled:opacity-50 disabled:cursor-not-allowed",title:e("backgroundDispatch.cancelDispatchJob"),children:c.has(N.jobId)?e("backgroundDispatch.cancelling"):e("backgroundDispatch.cancel")}),a.jsx("span",{className:"text-[11px] uppercase tracking-wide text-bambu-gray",children:e(`backgroundDispatch.status.${N.status}`)})]})]}),a.jsx("div",{className:"text-[11px] text-bambu-gray truncate",title:N.printerName,children:N.printerName}),N.message&&a.jsx("div",{className:"text-[11px] text-bambu-gray truncate",title:N.message,children:N.message}),N.status==="processing"&&(C?a.jsx("div",{className:"text-[11px] text-bambu-gray truncate",children:e("backgroundDispatch.awaitingPrinter")}):typeof N.uploadBytes=="number"&&typeof N.uploadTotalBytes=="number"&&N.uploadTotalBytes>0?a.jsxs("div",{className:"text-[11px] text-bambu-gray truncate",children:[Yi(N.uploadBytes)," / ",Yi(N.uploadTotalBytes),typeof N.uploadProgressPct=="number"?` (${N.uploadProgressPct.toFixed(1)}%)`:""]}):null),a.jsx("div",{className:"mt-1 h-1.5 w-full rounded bg-white/10 overflow-hidden",children:a.jsx("div",{className:`h-full ${A[N.status]} transition-all duration-300 ${C?"animate-pulse":""}`,style:{width:`${N.status==="processing"&&typeof N.uploadProgressPct=="number"?Math.max(0,Math.min(100,N.uploadProgressPct)):P[N.status]}%`}})})]},N.jobId)})})]}):a.jsxs(a.Fragment,{children:[n6[S.type],a.jsx("span",{className:"text-white text-sm",children:S.message}),a.jsx("button",{onClick:()=>b(S.id),className:"ml-2 text-bambu-gray hover:text-white transition-colors",children:a.jsx(Bt,{className:"w-4 h-4"})})]})},S.id))})]})}function nve(t="system"){const e=t==="system"?TJ():t;switch(e){case"us":return"MM/DD/YYYY";case"eu":return"DD/MM/YYYY";case"iso":return"YYYY-MM-DD";default:return e}}function rve(t="system"){switch(t){case"12h":return"HH:MM AM/PM";case"24h":return"HH:MM";default:{const n=new Date(2e3,0,1,14,30).toLocaleTimeString();return n.includes("PM")||n.includes("AM")?"HH:MM AM/PM":"HH:MM"}}}function TF(t,e="system"){const n=String(t.getDate()).padStart(2,"0"),r=String(t.getMonth()+1).padStart(2,"0"),i=t.getFullYear();switch(e){case"us":return`${r}/${n}/${i}`;case"eu":return`${n}/${r}/${i}`;case"iso":return`${i}-${r}-${n}`;default:return t.toLocaleDateString()}}function r6(t,e="system"){const n=t.getHours(),r=String(t.getMinutes()).padStart(2,"0");switch(e){case"12h":{const i=n%12||12,s=n<12?"AM":"PM";return`${i}:${r} ${s}`}case"24h":return`${String(n).padStart(2,"0")}:${r}`;default:return t.toLocaleTimeString([],{hour:"2-digit",minute:"2-digit"})}}function ave(t){for(const e of["/",".","-"]){const n=t.split(e);if(n.length===3)return n}return null}function TJ(){const t=new Date(2e3,11,31).toLocaleDateString();return t.startsWith("12")?"us":t.startsWith("31")?"eu":"iso"}function ive(t,e="system"){if(!t)return null;const n=ave(t);if(!n)return null;const r=e==="system"?TJ():e;let i,s,o;switch(r){case"us":s=parseInt(n[0],10),i=parseInt(n[1],10),o=parseInt(n[2],10);break;case"eu":i=parseInt(n[0],10),s=parseInt(n[1],10),o=parseInt(n[2],10);break;case"iso":o=parseInt(n[0],10),s=parseInt(n[1],10),i=parseInt(n[2],10);break}return isNaN(i)||isNaN(s)||isNaN(o)||s<1||s>12||i<1||i>31||o<1900||o>2100?null:new Date(o,s-1,i)}function sve(t){if(!t)return null;const n=t.trim().match(/^(\d{1,2}):(\d{2})\s*(AM|PM)?$/i);if(!n)return null;let r=parseInt(n[1],10);const i=parseInt(n[2],10),s=n[3]?.toUpperCase();return s==="PM"&&r<12&&(r+=12),s==="AM"&&r===12&&(r=0),r<0||r>23||i<0||i>59?null:{hours:r,minutes:i}}function AF(t){const e=t.getFullYear(),n=String(t.getMonth()+1).padStart(2,"0"),r=String(t.getDate()).padStart(2,"0"),i=String(t.getHours()).padStart(2,"0"),s=String(t.getMinutes()).padStart(2,"0");return`${e}-${n}-${r}T${i}:${s}`}function mw(t,e="system"){return e==="12h"?t.hour12=!0:e==="24h"&&(t.hour12=!1),t}function Kn(t){return t?t.endsWith("Z")||/[+-]\d{2}:\d{2}$/.test(t)?new Date(t):new Date(t+"Z"):null}function yg(t,e){const n=Kn(t);if(!n)return"";const r={year:"numeric",month:"short",day:"numeric"};return n.toLocaleDateString(void 0,e??r)}function vg(t,e="system",n){const r=Kn(t);if(!r)return"";const s=mw(n??{year:"numeric",month:"short",day:"numeric",hour:"2-digit",minute:"2-digit"},e);return r.toLocaleString(void 0,s)}function AJ(t,e="system",n){const i=mw({...{hour:"2-digit",minute:"2-digit"},...n},e);return t.toLocaleTimeString([],i)}function oO(t,e="system",n){const r=new Date,i=new Date(r.getTime()+t*60*1e3),s=new Date(r);s.setHours(0,0,0,0);const o=new Date(i);o.setHours(0,0,0,0);const l=mw({hour:"2-digit",minute:"2-digit"},e),c=i.toLocaleTimeString([],l),d=Math.floor((o.getTime()-s.getTime())/864e5);return d===0?c:d===1?`${n?.("common.tomorrow")??"Tomorrow"} ${c}`:`${i.toLocaleDateString([],{weekday:"short"})} ${c}`}function Qi(t){if(t==null||t<0)return"--";const e=Math.floor(t/3600),n=Math.floor(t%3600/60);return e>0?`${e}h ${n}m`:`${n}m`}function dp(t,e="system",n){if(!t)return n?.("time.unknown")??"-";const r=Kn(t);if(!r)return n?.("time.unknown")??"-";const i=new Date,s=r.getTime()-i.getTime(),o=s<0,l=Math.abs(s),c=Math.floor(l/6e4),d=Math.floor(l/36e5),u=Math.floor(l/864e5);return c<1?o?n?.("time.justNow")??"Just now":n?.("time.now")??"Now":d<1?o?n?.("time.minsAgo",{count:c})??`${c}m ago`:n?.("time.inMins",{count:c})??`in ${c}m`:u<1?o?n?.("time.hoursAgo",{count:d})??`${d}h ago`:n?.("time.inHours",{count:d})??`in ${d}h`:u<7?o?n?.("time.daysAgo",{count:u})??`${u}d ago`:n?.("time.inDays",{count:u})??`in ${u}d`:vg(t,e)}function Eh(t){const e=Math.floor(t/60),n=Math.floor(t%60);return`${e}:${n.toString().padStart(2,"0")}`}function ove(t){if(t<1)return`${Math.round(t*60)}m`;const e=Math.floor(t),n=Math.round((t-e)*60);return n>0?`${e}h ${n}m`:`${e}h`}const UM=1920,lve=.7,cve=300;function dve(t){return new Promise((e,n)=>{const r=new Image;r.onload=()=>{let{width:i,height:s}=r;if(i>UM||s>UM){const d=UM/Math.max(i,s);i=Math.round(i*d),s=Math.round(s*d)}const o=document.createElement("canvas");o.width=i,o.height=s;const l=o.getContext("2d");if(!l){n(new Error("No canvas context"));return}l.drawImage(r,0,0,i,s);const c=o.toDataURL("image/jpeg",lve);e(c.replace(/^data:[^;]+;base64,/,""))},r.onerror=n,r.src=URL.createObjectURL(t)})}function uve(t){const e=Math.floor(t/60),n=t%60;return`${e.toString().padStart(2,"0")}:${n.toString().padStart(2,"0")}`}function mve(){const{t}=_t(),[e,n]=w.useState(!1),[r,i]=w.useState("form"),[s,o]=w.useState(""),[l,c]=w.useState(""),[d,u]=w.useState(null),[m,p]=w.useState(!1),[f,x]=w.useState(null),[v,b]=w.useState(null),[g,S]=w.useState(""),[N,P]=w.useState(0),[C,A]=w.useState(!1),T=w.useRef(null),F=w.useRef(null),k=w.useRef(()=>{});w.useEffect(()=>{if(r!=="logging")return;if(N>=cve){k.current();return}const se=setTimeout(()=>P(K=>K+1),1e3);return()=>clearTimeout(se)},[r,N]);const E=()=>{n(!0),i("form"),o(""),c(""),u(null),x(null),b(null),S(""),P(0),A(!1)},$=()=>{n(!1)},z=w.useCallback(async se=>{if(se.type.startsWith("image/"))try{const K=await dve(se);u(K)}catch{}},[]),X=w.useCallback(se=>{const K=se.clipboardData?.items;if(K){for(const ae of K)if(ae.type.startsWith("image/")){const pe=ae.getAsFile();pe&&z(pe);break}}},[z]),R=w.useCallback(se=>{se.preventDefault(),p(!0)},[]),ne=w.useCallback(se=>{se.preventDefault(),p(!1)},[]),re=w.useCallback(se=>{se.preventDefault(),p(!1);const K=se.dataTransfer.files?.[0];K&&z(K)},[z]),J=async()=>{if(s.trim())try{const se=await zM.startLogging();A(se.was_debug),P(0),i("logging")}catch(se){S(se instanceof Error?se.message:t("bugReport.unexpectedError")),i("error")}},ue=async()=>{i("stopping");try{const se=await zM.stopLogging(C);await ie(se.logs)}catch(se){S(se instanceof Error?se.message:t("bugReport.unexpectedError")),i("error")}};k.current=ue;const ie=async se=>{i("submitting");try{const K=await zM.submit({description:s.trim(),email:l.trim()||void 0,screenshot_base64:d||void 0,include_support_info:!0,debug_logs:se||void 0});K.success?(x(K.issue_url||null),b(K.issue_number||null),i("success")):(S(K.message),i("error"))}catch(K){S(K instanceof Error?K.message:t("bugReport.unexpectedError")),i("error")}};return a.jsxs(a.Fragment,{children:[a.jsx("button",{onClick:E,className:"fixed bottom-4 right-4 z-40 w-12 h-12 rounded-full bg-red-500 hover:bg-red-600 text-white shadow-lg hover:shadow-xl transition-all duration-200 hover:scale-110 flex items-center justify-center",title:t("bugReport.title"),children:a.jsx(Yx,{className:"w-5 h-5"})}),e&&a.jsx("div",{id:"bug-report-modal",className:"fixed bottom-20 right-4 z-50 w-full max-w-md",onPaste:X,children:a.jsxs("div",{ref:T,className:"bg-white dark:bg-gray-800 rounded-lg shadow-2xl border border-gray-200 dark:border-gray-700 max-h-[80vh] overflow-y-auto",children:[a.jsxs("div",{className:"flex items-center justify-between p-4 border-b border-gray-200 dark:border-gray-700 sticky top-0 bg-white dark:bg-gray-800 z-10",children:[a.jsxs("h2",{className:"text-lg font-semibold text-gray-900 dark:text-white flex items-center gap-2",children:[a.jsx(Yx,{className:"w-5 h-5 text-red-500"}),t("bugReport.title")]}),a.jsx("button",{onClick:$,className:"text-gray-400 hover:text-gray-600 dark:hover:text-gray-300",children:a.jsx(Bt,{className:"w-5 h-5"})})]}),a.jsxs("div",{className:"p-4 space-y-4",children:[r==="form"&&a.jsxs(a.Fragment,{children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm font-medium text-gray-700 dark:text-gray-300 mb-1",children:[t("bugReport.description")," *"]}),a.jsx("textarea",{value:s,onChange:se=>o(se.target.value),placeholder:t("bugReport.descriptionPlaceholder"),rows:3,className:"w-full px-3 py-2 border border-gray-300 dark:border-gray-600 rounded-lg bg-white dark:bg-gray-700 text-gray-900 dark:text-white placeholder-gray-400 focus:ring-2 focus:ring-blue-500 focus:border-transparent resize-vertical"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-gray-700 dark:text-gray-300 mb-1",children:t("bugReport.email")}),a.jsx("input",{type:"email",value:l,onChange:se=>c(se.target.value),placeholder:t("bugReport.emailPlaceholder"),className:"w-full px-3 py-2 border border-gray-300 dark:border-gray-600 rounded-lg bg-white dark:bg-gray-700 text-gray-900 dark:text-white placeholder-gray-400 focus:ring-2 focus:ring-blue-500 focus:border-transparent"}),a.jsx("p",{className:"mt-1 text-xs text-gray-500 dark:text-gray-400",children:t("bugReport.emailPrivacy")})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-gray-700 dark:text-gray-300 mb-1",children:t("bugReport.screenshot")}),d?a.jsxs("div",{className:"relative",children:[a.jsx("img",{src:`data:image/jpeg;base64,${d}`,alt:t("bugReport.screenshot"),className:"w-full max-h-40 object-contain rounded-lg border border-gray-200 dark:border-gray-600"}),a.jsx("button",{onClick:()=>u(null),className:"absolute top-2 right-2 p-1 bg-red-500 hover:bg-red-600 text-white rounded-full shadow",title:t("common.delete"),children:a.jsx(Zt,{className:"w-3 h-3"})})]}):a.jsxs("button",{type:"button",onClick:()=>F.current?.click(),onDragOver:R,onDragLeave:ne,onDrop:re,className:`w-full flex flex-col items-center gap-2 px-4 py-4 border-2 border-dashed rounded-lg transition-colors cursor-pointer ${m?"border-blue-500 bg-blue-50 dark:bg-blue-900/20 text-blue-500":"border-gray-300 dark:border-gray-600 text-gray-500 dark:text-gray-400 hover:border-gray-400 dark:hover:border-gray-500 hover:text-gray-600 dark:hover:text-gray-300"}`,children:[a.jsx(_a,{className:"w-5 h-5"}),a.jsx("span",{className:"text-sm",children:t("bugReport.uploadOrPaste")})]}),a.jsx("input",{ref:F,type:"file",accept:"image/*",className:"hidden",onChange:se=>{const K=se.target.files?.[0];K&&z(K),se.target.value=""}})]}),a.jsxs("details",{className:"text-xs bg-amber-50 dark:bg-amber-900/20 border border-amber-200 dark:border-amber-800 rounded-lg p-3",children:[a.jsx("summary",{className:"cursor-pointer font-medium text-amber-700 dark:text-amber-300 hover:text-amber-800 dark:hover:text-amber-200",children:t("bugReport.dataCollectedSummary")}),a.jsxs("div",{className:"mt-2 space-y-2 pl-2 border-l-2 border-amber-300 dark:border-amber-700 text-amber-800 dark:text-amber-200",children:[a.jsx("p",{className:"font-medium",children:t("bugReport.dataIncluded")}),a.jsx("p",{children:t("bugReport.dataIncludedList")}),a.jsx("p",{className:"font-medium",children:t("bugReport.dataNeverIncluded")}),a.jsx("p",{children:t("bugReport.dataNeverIncludedList")})]})]}),a.jsxs("div",{className:"flex justify-end gap-2 pt-2",children:[a.jsx("button",{onClick:$,className:"px-4 py-2 text-sm font-medium text-gray-700 dark:text-gray-300 bg-gray-100 dark:bg-gray-700 hover:bg-gray-200 dark:hover:bg-gray-600 rounded-lg transition-colors",children:t("common.cancel")}),a.jsx("button",{onClick:J,disabled:!s.trim(),className:"px-4 py-2 text-sm font-medium text-white bg-red-500 hover:bg-red-600 disabled:opacity-50 disabled:cursor-not-allowed rounded-lg transition-colors",children:t("bugReport.startLogging")})]})]}),r==="logging"&&a.jsxs("div",{className:"py-6 space-y-6",children:[a.jsxs("div",{className:"space-y-3 px-2",children:[a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsx(Bc,{className:"w-5 h-5 text-green-500 flex-shrink-0"}),a.jsx("span",{className:"text-sm text-green-700 dark:text-green-400",children:t("bugReport.stepEnableLogging")})]}),a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsxs("span",{className:"relative flex h-5 w-5 flex-shrink-0 items-center justify-center",children:[a.jsx("span",{className:"animate-ping absolute inline-flex h-full w-full rounded-full bg-blue-400 opacity-75"}),a.jsx("span",{className:"relative inline-flex rounded-full h-3 w-3 bg-blue-500"})]}),a.jsx("span",{className:"text-sm font-medium text-blue-700 dark:text-blue-300",children:t("bugReport.stepReproduce")})]}),a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsx(cw,{className:"w-5 h-5 text-gray-300 dark:text-gray-600 flex-shrink-0"}),a.jsx("span",{className:"text-sm text-gray-400 dark:text-gray-500",children:t("bugReport.stepStopLogging")})]})]}),a.jsxs("div",{className:"text-center",children:[a.jsx("p",{className:"text-3xl font-mono text-blue-500",children:uve(N)}),a.jsx("p",{className:"text-xs text-gray-500 dark:text-gray-400 mt-1",children:t("bugReport.maxDuration",{minutes:5})})]}),a.jsx("div",{className:"flex justify-center",children:a.jsx("button",{onClick:ue,className:"px-6 py-2.5 text-sm font-medium text-white bg-red-500 hover:bg-red-600 rounded-lg transition-colors",children:t("bugReport.stopAndSubmit")})})]}),(r==="stopping"||r==="submitting")&&a.jsxs("div",{className:"flex flex-col items-center justify-center py-8 gap-3",children:[a.jsx(mt,{className:"w-8 h-8 animate-spin text-blue-500"}),a.jsx("p",{className:"text-sm text-gray-600 dark:text-gray-400",children:t(r==="stopping"?"bugReport.stoppingLogs":"bugReport.submitting")})]}),r==="success"&&a.jsxs("div",{className:"flex flex-col items-center justify-center py-8 gap-3",children:[a.jsx(wr,{className:"w-12 h-12 text-green-500"}),a.jsx("p",{className:"text-lg font-semibold text-gray-900 dark:text-white",children:t("bugReport.thankYou")}),a.jsx("p",{className:"text-sm text-gray-600 dark:text-gray-400",children:t("bugReport.submitted")}),f&&a.jsxs("a",{href:f,target:"_blank",rel:"noopener noreferrer",className:"text-sm text-blue-500 hover:text-blue-600 underline",children:[t("bugReport.viewIssue")," #",v]}),a.jsx("button",{onClick:$,className:"mt-4 px-4 py-2 text-sm font-medium text-gray-700 dark:text-gray-300 bg-gray-100 dark:bg-gray-700 hover:bg-gray-200 dark:hover:bg-gray-600 rounded-lg transition-colors",children:t("common.close")})]}),r==="error"&&a.jsxs("div",{className:"flex flex-col items-center justify-center py-8 gap-3",children:[a.jsx(Oa,{className:"w-12 h-12 text-red-500"}),a.jsx("p",{className:"text-lg font-semibold text-gray-900 dark:text-white",children:t("bugReport.submitFailed")}),a.jsx("p",{className:"text-sm text-gray-600 dark:text-gray-400 text-center",children:g}),a.jsxs("div",{className:"flex gap-2 mt-4",children:[a.jsx("button",{onClick:()=>i("form"),className:"px-4 py-2 text-sm font-medium text-white bg-red-500 hover:bg-red-600 rounded-lg transition-colors",children:t("bugReport.submit")}),a.jsx("button",{onClick:$,className:"px-4 py-2 text-sm font-medium text-gray-700 dark:text-gray-300 bg-gray-100 dark:bg-gray-700 hover:bg-gray-200 dark:hover:bg-gray-600 rounded-lg transition-colors",children:t("common.close")})]})]})]})]})})]})}const Zu=[{id:"printers",to:"/",icon:Mr,labelKey:"nav.printers"},{id:"archives",to:"/archives",icon:lo,labelKey:"nav.archives"},{id:"queue",to:"/queue",icon:da,labelKey:"nav.queue"},{id:"stats",to:"/stats",icon:_fe,labelKey:"nav.stats"},{id:"profiles",to:"/profiles",icon:qg,labelKey:"nav.profiles"},{id:"maintenance",to:"/maintenance",icon:xg,labelKey:"nav.maintenance"},{id:"projects",to:"/projects",icon:$s,labelKey:"nav.projects"},{id:"inventory",to:"/inventory",icon:mge,labelKey:"nav.inventory"},{id:"files",to:"/files",icon:fl,labelKey:"nav.files"},{id:"makerworld",to:"/makerworld",icon:qs,labelKey:"nav.makerworld"},{id:"notifications",to:"/notifications",icon:ap,labelKey:"nav.notifications"},{id:"settings",to:"/settings",icon:mS,labelKey:"nav.settings"}];function hve(){const t=localStorage.getItem("sidebarOrder");if(t)try{return JSON.parse(t)}catch{return Zu.map(e=>e.id)}return Zu.map(e=>e.id)}function a6(t){localStorage.setItem("sidebarOrder",JSON.stringify(t))}function r1(t){return t.startsWith("ext-")}function jJ(){return localStorage.getItem("defaultView")||"/"}function pve(t){localStorage.setItem("defaultView",t)}function fve(){const t=as(),e=Qc(),{mode:n,toggleMode:r}=Gg(),{t:i}=_t(),s=Yye();NJ();const{user:o,authEnabled:l,logout:c,hasPermission:d}=gr(),{showToast:u}=rn(),[m,p]=w.useState(!1),[f,x]=w.useState({currentPassword:"",newPassword:"",confirmPassword:""}),[v,b]=w.useState(!1),[g,S]=w.useState(()=>localStorage.getItem("sidebarExpanded")!=="false"),[N,P]=w.useState(!1),[C,A]=w.useState(!1),[T,F]=w.useState(!1),[k,E]=w.useState(hve),[$,z]=w.useState(null),[X,R]=w.useState(null),ne=w.useRef(!1),[re,J]=w.useState(()=>sessionStorage.getItem("dismissedUpdateVersion")),[ue,ie]=w.useState(null),{data:se}=Qe({queryKey:["version"],queryFn:oe.getVersion,staleTime:1/0}),{data:K}=Qe({queryKey:["settings"],queryFn:oe.getSettings,staleTime:300*1e3}),{data:ae}=Qe({queryKey:["default-sidebar-order"],queryFn:oe.getDefaultSidebarOrder,staleTime:300*1e3});w.useEffect(()=>{const xe=ae?.default_sidebar_order;if(!xe||l&&!o)return;const Fe=o?`sidebarDefaultApplied_${o.id}`:"sidebarDefaultApplied";if(!localStorage.getItem(Fe))try{const Be=JSON.parse(xe),Ce=Array.isArray(Be)?Be:Be.order;if(!Array.isArray(Ce)||Ce.length===0)return;const ze=new Set(Zu.map(Oe=>Oe.id)),Me=Ce.filter(Oe=>typeof Oe=="string"&&(ze.has(Oe)||r1(Oe)));Me.length>0&&(E(Me),a6(Me),localStorage.setItem(Fe,"1"))}catch(Be){console.error("Failed to apply default sidebar order:",Be)}},[ae?.default_sidebar_order,E,o,l]);const{data:pe}=Qe({queryKey:["advancedAuthStatus"],queryFn:oe.getAdvancedAuthStatus,staleTime:300*1e3,enabled:l}),{data:be}=Qe({queryKey:["updateCheck"],queryFn:oe.checkForUpdates,enabled:K?.check_updates!==!1,staleTime:3600*1e3,refetchInterval:3600*1e3}),{data:fe}=Qe({queryKey:["external-links"],queryFn:oe.getExternalLinks}),{data:B}=Qe({queryKey:["smart-plugs"],queryFn:oe.getSmartPlugs,staleTime:30*1e3}),Y=B?.some(xe=>xe.show_in_switchbar)??!1,{data:D}=Qe({queryKey:["debugLogging"],queryFn:Lx.getDebugLoggingState,staleTime:60*1e3,refetchInterval:60*1e3}),{data:M}=Qe({queryKey:["developer-mode-warnings"],queryFn:oe.getDeveloperModeWarnings,staleTime:10*1e3,refetchInterval:30*1e3,refetchOnWindowFocus:!0}),{data:U}=Qe({queryKey:["queue","pending"],queryFn:()=>oe.getQueue(void 0,"pending"),staleTime:5*1e3,refetchInterval:5*1e3,refetchOnWindowFocus:!0}),Q=U?.length??0,{data:O}=Qe({queryKey:["pending-uploads","count"],queryFn:vx.getCount,staleTime:5*1e3,refetchInterval:5*1e3,refetchOnWindowFocus:!0}),ce=O?.count??0,I=w.useMemo(()=>{const xe=new Set;return U?.forEach(Fe=>{Fe.printer_id&&xe.add(Fe.printer_id)}),Array.from(xe)},[U]),q=Dp({queries:I.map(xe=>({queryKey:["printerStatus",xe],queryFn:()=>oe.getPrinterStatus(xe),staleTime:30*1e3}))}).some(xe=>{const Fe=xe.data;return Fe?!!Fe.awaiting_plate_clear:!1}),[W,te]=w.useState(null);w.useEffect(()=>{if(!D?.enabled||!D.enabled_at){te(null);return}const xe=Kn(D.enabled_at)?.getTime()??Date.now(),Fe=()=>{te(Math.floor((Date.now()-xe)/1e3))};Fe();const Be=setInterval(Fe,1e3);return()=>clearInterval(Be)},[D?.enabled,D?.enabled_at]);const le=w.useMemo(()=>new Map(Zu.map(xe=>[xe.id,xe])),[]),ye=w.useMemo(()=>new Map((fe||[]).map(xe=>[`ext-${xe.id}`,xe])),[fe]),he=(()=>{const xe=[],Fe=new Set,Be={archives:"archives:read",queue:"queue:read",stats:"stats:read",profiles:"kprofiles:read",maintenance:"maintenance:read",projects:"projects:read",inventory:"inventory:read",files:"library:read",settings:"settings:read",notifications:"notifications:user_email"},Ce=ze=>!!(l&&ze in Be&&!d(Be[ze])||ze==="notifications"&&(!l||!pe?.advanced_auth_enabled||K?.user_notifications_enabled===!1));for(const ze of k)Ce(ze)||(le.has(ze)||ye.has(ze))&&(xe.push(ze),Fe.add(ze));for(const ze of Zu)Ce(ze.id)||Fe.has(ze.id)||(xe.push(ze.id),Fe.add(ze.id));for(const ze of fe||[]){const Me=`ext-${ze.id}`;Fe.has(Me)||(xe.push(Me),Fe.add(Me))}return xe})(),me=(xe,Fe)=>{z(Fe),xe.dataTransfer.effectAllowed="move",xe.dataTransfer.setData("text/plain",Fe)},H=(xe,Fe)=>{xe.preventDefault(),xe.dataTransfer.dropEffect="move",R(Fe)},L=()=>{R(null)},ee=(xe,Fe)=>{if(xe.preventDefault(),$===null||$===Fe){z(null),R(null);return}const Be=[...he],Ce=Be.indexOf($),ze=Be.indexOf(Fe);if(Ce===-1||ze===-1){z(null),R(null);return}Be.splice(Ce,1),Be.splice(ze,0,$),E(Be),a6(Be),z(null),R(null)},ge=()=>{z(null),R(null)},ke=be?.update_available&&be.latest_version&&be.latest_version!==re,je=()=>{be?.latest_version&&(sessionStorage.setItem("dismissedUpdateVersion",be.latest_version),J(be.latest_version))};w.useEffect(()=>{if(!ne.current&&e.pathname==="/"){const xe=jJ();xe!=="/"&&(ne.current=!0,t(xe,{replace:!0}))}},[e.pathname,t]),w.useEffect(()=>{localStorage.setItem("sidebarExpanded",String(g))},[g]),w.useEffect(()=>{s&&P(!1)},[e.pathname,s]),w.useEffect(()=>{const xe=Fe=>{if(!d("printers:control"))return;const Be=Fe.detail;ie({printer_id:Be.printer_id,printer_name:Be.printer_name,message:Be.message})};return window.addEventListener("plate-not-empty",xe),()=>window.removeEventListener("plate-not-empty",xe)},[d]);const Te=w.useCallback(xe=>{const Fe=xe.target;if(!(Fe.tagName==="INPUT"||Fe.tagName==="TEXTAREA"||Fe.isContentEditable)&&!xe.metaKey&&!xe.ctrlKey&&!xe.altKey){const Be=parseInt(xe.key);if(Be>=1&&Be<=he.length&&Be<=9){const Ce=he[Be-1];if(xe.preventDefault(),r1(Ce)){const ze=ye.get(Ce);if(ze?.open_in_new_tab)window.open(ze.url,"_blank","noopener,noreferrer");else{const Me=Ce.replace("ext-","");t(`/external/${Me}`)}}else{const ze=le.get(Ce);ze&&t(ze.to)}return}switch(xe.key){case"?":xe.preventDefault(),A(!0);break;case"Escape":A(!1);break}}},[t,he,le,ye]);return w.useEffect(()=>(document.addEventListener("keydown",Te),()=>document.removeEventListener("keydown",Te)),[Te]),a.jsxs("div",{className:"flex min-h-screen",children:[s&&a.jsxs("header",{className:"fixed top-0 left-0 right-0 z-40 h-14 bg-bambu-dark-secondary border-b border-bambu-dark-tertiary flex items-center px-4",children:[a.jsx("button",{onClick:()=>P(!0),className:"p-2 -ml-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors","aria-label":"Open menu",children:a.jsx(Kbe,{className:"w-6 h-6 text-white"})}),a.jsx("img",{src:n==="dark"?"/img/bambuddy_logo_dark_transparent.png":"/img/bambuddy_logo_light.png",alt:"Bambuddy",className:"h-8 ml-3"})]}),s&&N&&a.jsx("div",{className:"fixed inset-0 bg-black/60 z-40 transition-opacity",onClick:()=>P(!1)}),a.jsxs("aside",{className:`bg-bambu-dark-secondary border-r border-bambu-dark-tertiary flex flex-col transition-all duration-300 ${s?`fixed inset-y-0 left-0 z-50 w-72 transform ${N?"translate-x-0":"-translate-x-full"}`:`fixed inset-y-0 left-0 z-30 ${g?"w-64":"w-16"}`}`,children:[a.jsx("div",{className:`border-b border-bambu-dark-tertiary flex items-center justify-center ${s||g?"p-4":"p-2"}`,children:a.jsx("img",{src:n==="dark"?"/img/bambuddy_logo_dark_transparent.png":"/img/bambuddy_logo_light.png",alt:"Bambuddy",className:s||g?"h-16 w-auto":"h-8 w-8 object-cover object-left"})}),a.jsx("nav",{className:"flex-1 p-2 overflow-y-auto",children:a.jsx("ul",{className:"space-y-2",children:he.map(xe=>{if(r1(xe)){const Be=ye.get(xe);if(!Be)return null;const Ce=Be.custom_icon?null:nT(Be.icon);return a.jsx("li",{draggable:!0,onDragStart:ze=>me(ze,xe),onDragOver:ze=>H(ze,xe),onDragLeave:L,onDrop:ze=>ee(ze,xe),onDragEnd:ge,className:`relative ${$===xe?"opacity-50":""} ${X===xe&&$!==xe?"before:absolute before:left-0 before:right-0 before:top-0 before:h-0.5 before:bg-bambu-green":""}`,children:Be.open_in_new_tab?a.jsxs("a",{href:Be.url,target:"_blank",rel:"noopener noreferrer",className:`flex items-center ${s||g?"gap-3 px-4":"justify-center px-2"} py-3 rounded-lg transition-colors group text-bambu-gray-light hover:bg-bambu-dark-tertiary hover:text-white`,title:!s&&!g?Be.name:void 0,children:[g&&!s&&a.jsx(lp,{className:"w-4 h-4 flex-shrink-0 opacity-0 group-hover:opacity-50 cursor-grab active:cursor-grabbing -ml-1"}),Be.custom_icon?a.jsx("img",{src:oe.getExternalLinkIconUrl(Be.id),alt:"",className:"w-5 h-5 flex-shrink-0"}):Ce&&a.jsx(Ce,{className:"w-5 h-5 flex-shrink-0"}),(s||g)&&a.jsx("span",{children:Be.name})]}):a.jsxs(Px,{to:`/external/${Be.id}`,className:({isActive:ze})=>`flex items-center ${s||g?"gap-3 px-4":"justify-center px-2"} py-3 rounded-lg transition-colors group ${ze?"bg-bambu-green text-white":"text-bambu-gray-light hover:bg-bambu-dark-tertiary hover:text-white"}`,title:!s&&!g?Be.name:void 0,children:[g&&!s&&a.jsx(lp,{className:"w-4 h-4 flex-shrink-0 opacity-0 group-hover:opacity-50 cursor-grab active:cursor-grabbing -ml-1"}),Be.custom_icon?a.jsx("img",{src:oe.getExternalLinkIconUrl(Be.id),alt:"",className:"w-5 h-5 flex-shrink-0"}):Ce&&a.jsx(Ce,{className:"w-5 h-5 flex-shrink-0"}),(s||g)&&a.jsx("span",{children:Be.name})]})},xe)}else{const Be=le.get(xe);if(!Be)return null;const{to:Ce,icon:ze,labelKey:Me}=Be,Oe=xe==="queue"&&Q>0,Ge=xe==="archives"&&ce>0,et=Oe?Q:Ge?ce:0,ve=Oe||Ge,Xe=xe==="printers"&&q;return a.jsx("li",{draggable:!0,onDragStart:Pe=>me(Pe,xe),onDragOver:Pe=>H(Pe,xe),onDragLeave:L,onDrop:Pe=>ee(Pe,xe),onDragEnd:ge,className:`relative ${$===xe?"opacity-50":""} ${X===xe&&$!==xe?"before:absolute before:left-0 before:right-0 before:top-0 before:h-0.5 before:bg-bambu-green":""}`,children:a.jsxs(Px,{to:Ce,className:({isActive:Pe})=>`flex items-center ${s||g?"gap-3 px-4":"justify-center px-2"} py-3 rounded-lg transition-colors group ${Pe?"bg-bambu-green text-white":"text-bambu-gray-light hover:bg-bambu-dark-tertiary hover:text-white"}`,title:!s&&!g?i(Me):void 0,children:[g&&!s&&a.jsx(lp,{className:"w-4 h-4 flex-shrink-0 opacity-0 group-hover:opacity-50 cursor-grab active:cursor-grabbing -ml-1"}),a.jsxs("div",{className:"relative",children:[a.jsx(ze,{className:"w-5 h-5 flex-shrink-0"}),Xe&&a.jsx("span",{className:"absolute -top-0.5 -right-0.5 w-2.5 h-2.5 bg-yellow-500 rounded-full border-2 border-bambu-dark-secondary"}),ve&&a.jsx("span",{className:`absolute -top-1.5 -right-1.5 min-w-[18px] h-[18px] px-1 flex items-center justify-center text-[10px] font-bold rounded-full ${Ge?"bg-blue-500 text-white":"bg-yellow-500 text-black"}`,children:et>99?"99+":et})]}),(s||g)&&a.jsx("span",{children:i(Me)})]})},xe)}})})}),!s&&a.jsx("button",{onClick:()=>S(!g),className:"p-2 mx-2 mb-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white flex items-center justify-center",title:i(g?"nav.collapseSidebar":"nav.expandSidebar"),children:g?a.jsx(Uo,{className:"w-5 h-5"}):a.jsx(za,{className:"w-5 h-5"})}),a.jsx("div",{className:"flex-shrink-0 p-2 border-t border-bambu-dark-tertiary",children:s||g?a.jsxs("div",{className:"flex flex-col gap-2 px-2",children:[a.jsxs("div",{className:"flex items-center justify-center gap-1 flex-wrap",children:[Y&&a.jsxs("div",{className:"relative",children:[a.jsx("button",{onMouseEnter:()=>F(!0),className:`p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors ${T?"text-bambu-green":"text-bambu-gray-light hover:text-white"}`,title:i("nav.smartSwitches",{defaultValue:"Smart Switches"}),children:a.jsx(tc,{className:"w-5 h-5"})}),T&&a.jsx(JH,{onClose:()=>F(!1)})]}),d("system:read")?a.jsx(Px,{to:"/system",className:({isActive:xe})=>`p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors ${xe?"text-bambu-green":"text-bambu-gray-light hover:text-white"}`,title:i("nav.system"),children:a.jsx(Cs,{className:"w-5 h-5"})}):a.jsx("span",{className:"p-2 rounded-lg text-bambu-gray/50 cursor-not-allowed",title:"You do not have permission to view system information",children:a.jsx(Cs,{className:"w-5 h-5"})}),a.jsx("a",{href:"https://github.com/maziggy/bambuddy",target:"_blank",rel:"noopener noreferrer",className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("nav.viewOnGithub"),children:a.jsx(xF,{className:"w-5 h-5"})}),a.jsx("button",{onClick:()=>A(!0),className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("nav.keyboardShortcuts"),children:a.jsx(yF,{className:"w-5 h-5"})}),a.jsx("button",{onClick:r,className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i(n==="dark"?"nav.switchToLight":"nav.switchToDark"),children:n==="dark"?a.jsx(XH,{className:"w-5 h-5"}):a.jsx(EN,{className:"w-5 h-5"})}),l&&o&&a.jsxs(a.Fragment,{children:[a.jsx("button",{onClick:()=>p(!0),className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("changePassword.title"),children:a.jsx(ao,{className:"w-5 h-5"})}),a.jsx("button",{onClick:c,className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("nav.logout",{defaultValue:"Logout"}),children:a.jsx(wF,{className:"w-5 h-5"})})]})]}),a.jsxs("div",{className:"flex items-center justify-center gap-2",children:[a.jsxs("span",{className:"text-sm text-bambu-gray",children:["v",se?.version||"..."]}),be?.update_available&&a.jsxs("button",{onClick:()=>t("/settings"),className:"flex items-center gap-1 text-xs text-bambu-green hover:text-bambu-green/80 transition-colors",title:i("nav.updateAvailable",{version:be.latest_version}),children:[a.jsx(IM,{className:"w-4 h-4"}),a.jsx("span",{children:i("nav.update")})]})]})]}):a.jsxs("div",{className:"flex flex-col items-center gap-1 overflow-y-auto max-h-[50vh]",children:[be?.update_available&&a.jsx("button",{onClick:()=>t("/settings"),className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-green hover:text-bambu-green/80",title:i("nav.updateAvailable",{version:be.latest_version}),children:a.jsx(IM,{className:"w-5 h-5"})}),Y&&a.jsxs("div",{className:"relative",children:[a.jsx("button",{onMouseEnter:()=>F(!0),className:`p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors ${T?"text-bambu-green":"text-bambu-gray-light hover:text-white"}`,title:i("nav.smartSwitches",{defaultValue:"Smart Switches"}),children:a.jsx(tc,{className:"w-5 h-5"})}),T&&a.jsx(JH,{onClose:()=>F(!1)})]}),d("system:read")?a.jsx(Px,{to:"/system",className:({isActive:xe})=>`p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors ${xe?"text-bambu-green":"text-bambu-gray-light hover:text-white"}`,title:i("nav.system"),children:a.jsx(Cs,{className:"w-5 h-5"})}):a.jsx("span",{className:"p-2 rounded-lg text-bambu-gray/50 cursor-not-allowed",title:"You do not have permission to view system information",children:a.jsx(Cs,{className:"w-5 h-5"})}),a.jsx("a",{href:"https://github.com/maziggy/bambuddy",target:"_blank",rel:"noopener noreferrer",className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("nav.viewOnGithub"),children:a.jsx(xF,{className:"w-5 h-5"})}),a.jsx("button",{onClick:()=>A(!0),className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("nav.keyboardShortcuts"),children:a.jsx(yF,{className:"w-5 h-5"})}),a.jsx("button",{onClick:r,className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i(n==="dark"?"nav.switchToLight":"nav.switchToDark"),children:n==="dark"?a.jsx(XH,{className:"w-5 h-5"}):a.jsx(EN,{className:"w-5 h-5"})}),l&&o&&a.jsxs(a.Fragment,{children:[a.jsx("button",{onClick:()=>p(!0),className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("changePassword.title"),children:a.jsx(ao,{className:"w-5 h-5"})}),a.jsx("button",{onClick:c,className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("nav.logout",{defaultValue:"Logout"}),children:a.jsx(wF,{className:"w-5 h-5"})})]})]})})]}),a.jsxs("main",{className:`flex-1 bg-bambu-dark overflow-auto transition-all duration-300 ${s?"mt-14":g?"ml-64":"ml-16"}`,children:[D?.enabled&&a.jsx("div",{className:"bg-amber-500/20 border-b border-amber-500/30 px-4 py-2 flex items-center justify-between",children:a.jsxs("div",{className:"flex items-center gap-2 text-sm",children:[a.jsx(Yx,{className:"w-4 h-4 text-amber-500 animate-pulse"}),a.jsxs("span",{className:"text-amber-200",children:[i("support.debugLoggingActive",{defaultValue:"Debug logging is active"}),W!==null&&a.jsxs("span",{className:"text-amber-300/70 ml-2",children:["(",Math.floor(W/60),"m ",W%60,"s)"]})]}),a.jsx("button",{onClick:()=>t("/system"),className:"text-amber-400 hover:text-amber-300 font-medium underline ml-2",children:i("support.manageLogs",{defaultValue:"Manage"})})]})}),M&&M.length>0&&a.jsx("div",{className:"bg-orange-500/20 border-b border-orange-500/30 px-4 py-2 flex items-center justify-between",children:a.jsxs("div",{className:"flex items-center gap-2 text-sm",children:[a.jsx(Oxe,{className:"w-4 h-4 text-orange-500"}),a.jsx("span",{className:"text-orange-200",children:i("printers.developerModeWarning",{names:M.map(xe=>xe.name).join(", "),defaultValue:`Developer LAN mode is not enabled on: ${M.map(xe=>xe.name).join(", ")}. Some features may not work.`})}),a.jsx("a",{href:"https://wiki.bambulab.com/en/knowledge-sharing/enable-developer-mode",target:"_blank",rel:"noopener noreferrer",className:"text-orange-400 hover:text-orange-300 font-medium underline ml-2",children:i("printers.howToEnable",{defaultValue:"How to enable"})})]})}),ke&&a.jsxs("div",{className:"bg-bambu-green/20 border-b border-bambu-green/30 px-4 py-2 flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-2 text-sm",children:[a.jsx(IM,{className:"w-4 h-4 text-bambu-green"}),a.jsx("span",{children:i("nav.updateAvailableBanner",{version:be?.latest_version,defaultValue:`Version ${be?.latest_version} is available!`})}),a.jsx("button",{onClick:()=>t("/settings"),className:"text-bambu-green hover:text-bambu-green/80 font-medium underline",children:i("nav.viewUpdate",{defaultValue:"View update"})})]}),a.jsx("button",{onClick:je,className:"p-1 hover:bg-bambu-dark-tertiary rounded transition-colors",title:i("common.dismiss",{defaultValue:"Dismiss"}),children:a.jsx(Bt,{className:"w-4 h-4"})})]}),a.jsx(RQ,{})]}),C&&a.jsx(Wye,{onClose:()=>A(!1),sidebarItems:he.map(xe=>{if(r1(xe)){const Fe=ye.get(xe);return Fe?{type:"external",label:Fe.name}:null}else{const Fe=le.get(xe);return Fe?{type:"nav",label:Fe.labelKey,labelKey:Fe.labelKey}:null}}).filter(Boolean)}),ue&&a.jsx("div",{className:"fixed inset-0 bg-black/70 flex items-center justify-center z-[100] p-4",children:a.jsx("div",{className:"bg-bambu-dark-secondary border-2 border-yellow-500 rounded-xl shadow-2xl max-w-md w-full animate-in fade-in zoom-in duration-200",children:a.jsxs("div",{className:"p-6 text-center",children:[a.jsx("div",{className:"w-16 h-16 mx-auto mb-4 rounded-full bg-yellow-500/20 flex items-center justify-center",children:a.jsx("svg",{className:"w-10 h-10 text-yellow-500",fill:"none",viewBox:"0 0 24 24",stroke:"currentColor",strokeWidth:2,children:a.jsx("path",{strokeLinecap:"round",strokeLinejoin:"round",d:"M12 9v2m0 4h.01m-6.938 4h13.856c1.54 0 2.502-1.667 1.732-3L13.732 4c-.77-1.333-2.694-1.333-3.464 0L3.34 16c-.77 1.333.192 3 1.732 3z"})})}),a.jsx("h2",{className:"text-xl font-bold text-yellow-400 mb-2",children:i("plateAlert.title")}),a.jsx("p",{className:"text-lg text-white mb-2",children:ue.printer_name}),a.jsx("p",{className:"text-bambu-gray mb-6",children:i("plateAlert.message")}),a.jsx("button",{onClick:()=>ie(null),className:"w-full py-3 px-6 bg-yellow-500 hover:bg-yellow-600 text-black font-semibold rounded-lg transition-colors",children:i("plateAlert.understand")})]})})}),m&&a.jsx("div",{className:"fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4",onClick:()=>{p(!1),x({currentPassword:"",newPassword:"",confirmPassword:""})},children:a.jsxs(wt,{className:"w-full max-w-md",onClick:xe=>xe.stopPropagation(),children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(ao,{className:"w-5 h-5 text-bambu-green"}),a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("changePassword.title")})]}),a.jsx(De,{variant:"ghost",size:"sm",onClick:()=>{p(!1),x({currentPassword:"",newPassword:"",confirmPassword:""})},children:a.jsx(Bt,{className:"w-5 h-5"})})]})}),a.jsxs(St,{children:[a.jsxs("div",{className:"space-y-4",children:[a.jsx("input",{type:"text",name:"username",autoComplete:"username",value:o?.username??"",readOnly:!0,hidden:!0,"aria-hidden":"true",tabIndex:-1}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("changePassword.currentPassword")}),a.jsx("input",{type:"password",value:f.currentPassword,onChange:xe=>x({...f,currentPassword:xe.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("changePassword.currentPasswordPlaceholder"),autoComplete:"current-password"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("changePassword.newPassword")}),a.jsx("input",{type:"password",value:f.newPassword,onChange:xe=>x({...f,newPassword:xe.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("changePassword.newPasswordPlaceholder"),autoComplete:"new-password",minLength:6})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("changePassword.confirmPassword")}),a.jsx("input",{type:"password",value:f.confirmPassword,onChange:xe=>x({...f,confirmPassword:xe.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${f.confirmPassword&&f.newPassword!==f.confirmPassword?"border-red-500":"border-bambu-dark-tertiary"}`,placeholder:i("changePassword.confirmPasswordPlaceholder"),autoComplete:"new-password",minLength:6}),f.confirmPassword&&f.newPassword!==f.confirmPassword&&a.jsx("p",{className:"text-red-400 text-xs mt-1",children:i("changePassword.passwordsDoNotMatch")})]})]}),a.jsxs("div",{className:"mt-6 flex justify-end gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{p(!1),x({currentPassword:"",newPassword:"",confirmPassword:""})},children:i("common.cancel")}),a.jsx(De,{onClick:async()=>{if(f.newPassword!==f.confirmPassword){u(i("changePassword.passwordsDoNotMatch"),"error");return}if(f.newPassword.length<6){u(i("changePassword.passwordTooShort"),"error");return}b(!0);try{await oe.changePassword(f.currentPassword,f.newPassword),u(i("changePassword.success"),"success"),p(!1),x({currentPassword:"",newPassword:"",confirmPassword:""})}catch(xe){const Fe=xe instanceof Error?xe.message:i("changePassword.failed");u(Fe,"error")}finally{b(!1)}},disabled:v||!f.currentPassword||!f.newPassword||f.newPassword!==f.confirmPassword||f.newPassword.length<6,children:v?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),i("changePassword.changing")]}):a.jsxs(a.Fragment,{children:[a.jsx(ao,{className:"w-4 h-4"}),i("changePassword.title")]})})]})]})]})}),a.jsx(mve,{})]})}function gve(t,e){const n=t.split(".").map(i=>parseInt(i,10)||0),r=e.split(".").map(i=>parseInt(i,10)||0);for(;n.length<4;)n.push(0);for(;r.length<4;)r.push(0);for(let i=0;i<4;i++)if(n[i]!==r[i])return n[i]-r[i];return 0}function i6(t,e,n,r){if(!t)return"";if(r)return`${t} — ${r}`;if(!e)return t;const i=e.match(/plate_(\d+)\.gcode/);return i&&parseInt(i[1],10)>1?`${t} — ${n("printers.plateNumber","Plate {{number}}",{number:i[1]})}`:t}const jF={"0300_4000":"Z axis homing failed; the task has been stopped.","0300_4001":"The printer timed out waiting for the nozzle to cool down before homing.","0300_4002":"Auto Bed Leveling failed; the task has been stopped.","0300_4005":"The hotend cooling fan speed is abnormal.","0300_4006":"The nozzle is clogged.","0300_4008":"The AMS failed to change filament.","0300_4009":"Homing XY axis failed.","0300_400A":"Mechanical resonance frequency identification failed.","0300_400B":"Internal communication exception","0300_400C":"The task was canceled.","0300_400D":"Resume failed after power loss.","0300_400E":"The motor self-check failed.","0300_400F":"The power supply voltage does not match the printer.","0300_4010":"Nozzle offset calibration failed.","0300_4011":"Flow Dynamics Calibration failed; please reinitiate printing or calibration.","0300_4013":"Printing cannot be initiated while AMS is drying.","0300_4014":"Homing Z axis failed: temperature control abnormality.","0300_4015":"Nozzle clumping detection calibration failed. Please go to 'Assistant' for troubleshooting.","0300_4016":"Nozzle cleaning failed. Please click the Assistant for troubleshooting.","0300_401F":"The hotend is not installed, and the toolhead cannot perform homing. Please install the hotend and then continue.","0300_4020":"The nozzle presence detection failed. Please check the Assistant for details.","0300_4021":"Nozzle offset calibration sensor signal abnormality detected. Please check the sensor and retry.","0300_4042":"The Laser Safety Window is not properly installed. The task has been stopped.","0300_4044":"The Flame Sensor is abnormal. The sensor may be short-circuited. Please troubleshoot the issue before starting a print job.","0300_404B":"Task aborted because the front door or top cover is open.","0300_404D":"The current temperature of the hotend, heatbed, or chamber is too high. Please wait for it to cool down to room temperature before restarting the task.","0300_4050":"Liveview Camera calibration timeout; please restart the printer.","0300_4052":"Blade Z-axis homing failed","0300_4057":"Z-axis step loss detected. The task has stopped. Please check if there are any obstructions beneath the heatbed.","0300_4066":"Calibration of motion precision failed.","0300_4067":"Calibration result is over the threshold.","0300_4068":"Step loss occurred during the motion accuracy enhancement process. Please try again.","0300_8000":"Printing was paused for unknown reason. You can select 'Resume' to resume the print job.","0300_8001":"Printing was paused by the user. You can select 'Resume' to continue printing.","0300_8002":"First layer defects were detected by the Micro Lidar. Please check the quality of the printed model before continuing your print.","0300_8003":"Spaghetti defects were detected by the AI Print Monitoring. Please check the quality of the printed model before continuing your print.","0300_8004":"Filament ran out. Please load new filament.","0300_8005":"Toolhead front cover fell off. Please remount the front cover and check to make sure your print is going okay.","0300_8006":"The build plate marker was not detected. Please confirm the build plate is correctly positioned on the heatbed with all four corners aligned, and the marker is visible.","0300_8007":"There was an unfinished print job when the printer lost power. If the model is still adhered to the build plate, you can try resuming the print job.","0300_8008":"Nozzle temperature malfunction","0300_8009":"Heatbed temperature malfunction","0300_800A":"A Filament pile-up was detected by AI Print Monitoring. Please clean filament from the waste chute.","0300_800B":"The cutter is stuck. Please make sure the cutter handle is out and check the filament sensor cable connection.","0300_800C":"Skipped step detected: auto-recover complete; please resume print and check if there are any layer shift problems.","0300_800D":"Detected that the extruder is not extruding normally. If the defects are acceptable, select 'Resume' to resume the print job.","0300_800E":"The print file is not available. Please check to see if the storage media has been removed.","0300_800F":"The door seems to be open, so printing was paused.","0300_8010":"The hotend cooling fan speed is abnormal.","0300_8011":"Detected build plate is not the same as the Gcode file. Please adjust slicer settings or use the correct plate.","0300_8013":"Printing paused due to the pause command added to the printing file.","0300_8014":"The nozzle is covered with filament, or the build plate is installed incorrectly. Please cancel this print and clean the nozzle or adjust the build plate according to the actual status. You can als...","0300_8015":"The filament on external spool has run out; please load new filament. If the filament is loaded, please select 'Resume'.","0300_8016":"The nozzle is clogged with filament. Please cancel this print and clean the nozzle or select 'Resume' to resume the print job.","0300_8017":"Foreign objects detected on heatbed. Please check and clean the heatbed. Then, select 'Resume' to resume the print job.","0300_8018":"Chamber temperature malfunction.","0300_8019":"No build plate is placed.","0300_801A":"Filament extrusion error; please check the assistant for troubleshooting. After resolving the issue, decide whether to cancel or resume the print job based on the actual print status.","0300_801B":"Nozzle temperature problem detected. Refer to Assistant to re-connect the hotend connector. POWER OFF the printer before this operation to avoid short circuits.","0300_801C":"The extrusion resistance is abnormal. The extruder may be clogged; please refer to the assistant. After trouble shooting, you can select 'Resume' to resume the print job.","0300_801D":"The extruder servo motor position sensor is malfunctioning. Please power off the printer first and check if the connection cable is loose.","0300_801E":"The extrusion motor is overloaded, please check the Assistant for details.","0300_8021":"The nozzle may not be installed or not properly installed. Please ensure the nozzle is correctly installed before proceeding.","0300_8022":"The heatbed may be obstructed while moving downward. Please clear any objects beneath the heatbed and check for any resistance or jamming during its movement.","0300_8028":"Nozzle offset calibration sensor error. If using a single hotend or the calibration function is disabled, you may ignore this and continue printing; otherwise, it is recommended to check the sensor...","0300_8041":"Platform detection timeout: please restart the printer.","0300_8042":"Task paused because the door is open.","0300_8043":"The laser module is abnormal.","0300_8044":"Fire was detected inside the chamber.","0300_8045":"Material detection timeout: please restart the printer.","0300_8046":"Foreign object detect timeout: please restart the printer.","0300_8047":"Quick-release lever detection time out: please restart the printer.","0300_8048":"Laser Module unlock has timed out, and the task cannot proceed. Please restart the printer and try again.","0300_8049":"The current plate is invalid.","0300_804A":"Emergency stop button improperly installed. Please reinstall according to the Wiki before proceeding.","0300_804B":"Task paused. The Laser Safety Window is open.","0300_804E":"This is a printing task. Please detach the Laser/Cutting Module from the Toolhead.","0300_804F":"The loading/unloading process is currently ongoing. Please stop the process or remove the laser/cutting module.","0300_8050":"This device does not support the 40W Laser Module. Please remove it or replace it with a 10W Laser Module.","0300_8051":"The cutting module has dropped or the cutting module cable is disconnected; please check the module.","0300_8053":"Laser module detected. Please install the right nozzle correctly to ensure proper Laser Module Mounting Calibration.","0300_8054":"Please place the paper required for Print Then Cut.","0300_8055":"The module mounted on the toolhead does not match the task. Please install the correct module.","0300_8057":"The rotary attachment is disconnected. Please ensure it is properly installed and the cable is securely plugged in.","0300_8058":"The rotary attachment is detected. Please remove it before continuing.","0300_8061":"The mode of Airflow System failed to activate; check the air door condition.","0300_8062":"The chamber temperature is too high. It may be due to high environmental temperature.","0300_8063":"The chamber temperature is too high. Please open the top cover and front door to cool down.","0300_8064":"The chamber temperature is too high. Please open the top cover and front door to cool down. (Open door detection for this print job will be set to 'Notification' level)","0300_8065":"The temperature of the MC module is too high. Please check the Wiki for possible explanations.","0300_8071":"The Toolhead Enhanced Cooling Fan module is malfunctioning.","0300_807D":"Fire Extinguisher not detected, the automatic extinguishing function will be unavailable.","0300_807E":"Fire Extinguisher not detected, the automatic extinguishing function will be unavailable.","0300_807F":"Fire Extinguisher is malfunctioning.","0300_8080":"Fire extinguisher motor reset failed.","0300_8081":"Fire extinguisher cylinder not installed. Please confirm on the extinguisher page.","0300_8082":"The Fire Extinguisher Gas Cylinder is empty.","0300_C012":"Please heat the nozzle to above 170°C.","0300_C056":"A minor fire was detected inside the chamber, and the Auto Fire Extinguishing process has been aborted.","0300_C070":"The fire extinguisher has been detected and is ready for use after the laser module is connected.","0500_4001":"Failed to connect to Bambu Cloud. Please check your network connection.","0500_4002":"Unsupported print file path or name. Please resend the print job.","0500_4003":"Printing stopped because the printer was unable to parse the file. Please resend your print job.","0500_4004":"Device is busy and cannot start new task. Please wait for current task to complete before sending new task.","0500_4005":"Print jobs are not allowed to be sent while updating firmware.","0500_4006":"There is not enough free storage space for the print job. Restoring to factory settings can free up available space.","0500_4007":"The device requires a repair upgrade, and printing is currently unavailable.","0500_4008":"Starting printing failed; please power cycle the printer and resend the print job.","0500_4009":"Print jobs are not allowed to be sent while updating logs.","0500_400A":"The file name is not supported. Please rename and restart the print job.","0500_400B":"There was a problem downloading a file. Please check your network connection and resend the print job.","0500_400C":"Please insert a MicroSD card and restart the print job.","0500_400D":"Please run a self-test and restart the print job.","0500_400E":"Printing was cancelled.","0500_400F":"AMS is initializing and cannot be upgraded at the moment. Please try again later.","0500_4010":"AMS is drying and cannot be upgraded at the moment. Please try again later.","0500_4011":"The printer is loading or unloading filament and cannot be upgraded at the moment. Please try again later.","0500_4012":"The device is printing and cannot be upgraded at the moment. Please try again later.","0500_4013":"AMS is in operation and cannot be upgraded at the moment. Please try again when it is idle.","0500_4014":"Slicing for the print job failed. Please check your settings and restart the print job.","0500_4015":"There is not enough free storage space for the print job. Please format or clear files from the MicroSD card to free up space.","0500_4016":"The MicroSD Card is write-protected. Please replace the MicroSD Card.","0500_4017":"Binding failed. Please retry or restart the printer and retry.","0500_4018":"Binding configuration information parsing failed; please try again.","0500_4019":"The printer has already been bound. Please unbind it and try again.","0500_401A":"Cloud access failed. Possible reasons include network instability caused by interference, inability to access the internet, or router firewall configuration restrictions. You can try moving the pri...","0500_401B":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0500_401C":"Cloud access is rejected. If you have tried multiple times and are still failing, please contact customer support.","0500_401D":"Cloud access failed, which may be caused by network instability due to interference. You can try moving the printer closer to the router before you try again.","0500_401E":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0500_401F":"Authorization timed out. Please make sure that your phone or PC has access to the internet, and ensure that the Bambu Studio/Bambu Handy APP is running in the foreground during the binding operation.","0500_4020":"Cloud access rejected. If you have tried multiple times and are still failing, please contact customer support.","0500_4021":"Cloud access failed, which may be caused by network instability due to interference. You can try moving the printer closer to the router before you try again.","0500_4022":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0500_4023":"Cloud access rejected. If you have tried multiple times and are still failing, please contact customer support.","0500_4024":"Cloud access failed. Possible reasons include network instability caused by interference, inability to access the internet, or router firewall configuration restrictions. You can try moving the pri...","0500_4025":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0500_4026":"Cloud access rejected. If you have tried multiple times and are still failing, please contact customer support.","0500_4027":"Cloud access failed; this may be caused by network instability due to interference. You can try moving the printer closer to the router before you try again.","0500_4028":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0500_4029":"Cloud access is rejected. If you have tried multiple times and are still failing, please contact customer support.","0500_402A":"Failed to connect to the router, which may be caused by wireless interference or being too far away from the router. Please try again or move the printer closer to the router and try again.","0500_402B":"Router connection failed due to incorrect password. Please check the password and try again.","0500_402C":"Failed to obtain IP address, which may be caused by wireless interference resulting in data transmission failure or the DHCP address pool of the router being full. Please move the printer closer to...","0500_402D":"System exception","0500_402E":"System does not support the file system currently used by the USB flash drive. Please replace or format the USB flash drive to FAT32.","0500_402F":"The MicroSD card sector data is damaged. Please use the SD card repair tool to repair or format it. If it still cannot be identified, please replace the MicroSD card.","0500_4030":"The device is currently upgrading. Please try again when it is idle.","0500_4031":"The accessory firmware does not match the printer. Please update it on the 'Firmware' page.","0500_4033":"The AMS firmware does not match the printer. Please update it on the 'Firmware' page.","0500_4034":"The Laser Module firmware does not match the printer. Please update it on the 'Firmware' page.","0500_4035":"The BirdsEye Camera is malfunctioning. Please try restarting the device. If the issue persists after multiple restarts, check the camera connection status or contact customer support.","0500_4037":"Your sliced file is not compatible with current printer model. This file can't be printed on this printer.","0500_4038":"The nozzle diameter in sliced file is not consistent with the current nozzle setting. This file can't be printed.","0500_4039":"The current task does not allow the installation of the laser/cutting module, and the task has been halted.","0500_403A":"The current temperature is too low. In order to protect you and your printer, printing tasks, moving an axis and other operations are disabled. Please move the printer to an environment above 10 de...","0500_403B":"Laser/cutting tasks cannot be initiated on the machine at the moment. Please use the computer software to start the task.","0500_403C":"The current nozzle setting does not match the slicing file. Continuing to print may affect print quality. It is recommended to re-slice before starting the print.","0500_403D":"The toolhead module is not set up. Please set it up before initiating the task.","0500_403E":"The current tool head does not support initialization.","0500_403F":"Failed to download print job; please check your network connection.","0500_4040":"The printer has reached its power limit. Please connect a dedicated power adapter to this AMS to enable drying.","0500_4041":"The AMS drying cannot be started during printing.","0500_4042":"Due to power limitations, starting AMS drying will pause current operations such as nozzle heating and fan running. Do you want to proceed with drying?","0500_4043":"Due to power limitations, only one AMS is allowed to use the device's power for drying.","0500_4044":"BirdsEye Camera malfunction: please contact customer support.","0500_4045":"Hotend check in progress. This operation is temporarily unavailable. Please wait.","0500_4050":"Error detected on the print board.","0500_4052":"Error detected on the hot end.","0500_4054":"Error detected on the mat.","0500_405D":"Laser module Serial Number error: unable to calibrate or make project.","0500_4065":"The task requires a Laser Platform, but the current one is a Cutting Platform. Please replace it, measure the material thickness in the software, and then restart the task.","0500_4070":"The laser or cutter module is connected, so the device cannot initiate a 3D printing task.","0500_4075":"No Laser Platform was detected, which may affect thickness measurement accuracy. Please place the laser platform correctly and ensure the rear markers are not blocked, then restart the thickness me...","0500_4076":"Please place the Laser Platform correctly and ensure the rear markers are not blocked, then restart the thickness measurement in the software before initiating the task.","0500_4097":"The device cannot detect the Laser Module. Please reconnect the module cable or restart the printer.","0500_4098":"The device cannot detect AMS A. Please reconnect the AMS cable or restart the printer.","0500_4099":"The firmware of Cutting Module does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0500_409A":"The firmware of the Air Pump does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0500_409B":"The firmware of the Laser Module does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0500_409D":"The firmware of AMS A does not match the printer; the device cannot continue working. Please upgrade it on the 'Firmware' page.","0500_409E":"The device cannot detect the Cutting Module. Please reconnect the module cable or restart the printer.","0500_409F":"The device cannot detect the Air Pump.  Please reconnect the module cable or restart the printer.","0500_40A0":"The Rotary Attachment module is not detected. Please reconnect the cable or restart the printer.","0500_40A1":"The Auto Fire Extinguishing System is not detected.  Please reconnect the module cable or restart the printer.","0500_40A3":"AMS(or AMS lite) A communication is abnormal. Please reconnect the module cable or restart the printer.","0500_40A4":"The current firmware only supports 1 AMS Lite. Please remove all AMS units before reconnecting the supported AMS Lite device.","0500_40A5":"The current firmware only supports AMS/AMS 2 Pro/AMS HT, with a maximum of 4 units. Please remove all AMS units before reconnecting the supported one.","0500_8013":"The print file is not available. Please check to see if the storage media has been removed.","0500_8036":"Your sliced file is not consistent with the current printer model. Continue?","0500_803C":"The current nozzle setting does not match the slicing file. Continuing to print may affect print quality. It is recommended to re-slice before starting the print.","0500_8040":"Toolhead front cover is detached. Moving the toolhead may damage the printer. Do you want to continue?","0500_8041":"The filament in hotend is too cold. Extrusion may damage the extruder. Still feeding in/out the filament?","0500_8048":"The module on the toolhead is not calibrated. Please cancel the task to perform calibration or switch to a calibrated module.","0500_8051":"Detected build plate is not the same as the Gcode file. Please adjust slicer settings or use the correct plate.","0500_8053":"Nozzle mismatch was detected during printing. Please initiate the print after re-slicing, or continue printing after replacing with the correct nozzle. Caution: the hotend temperature is high.","0500_8055":"Laser module is installed, but a Cutting Platform is detected. Please place a Laser Platform and perform laser calibration.","0500_8056":"Cutting module is installed, but the laser platform is detected. Please place the cutting platform for calibration.","0500_8058":"Please place the light grip cutting mat correctly and ensure the marker is exposed.","0500_8059":"Cutting platform base is not correctly aligned. Please ensure that the four corners of the platform are aligned with the heatbed.","0500_805A":"Please place the cutting mat on cutting protection base.","0500_805B":"The cutting mat type is unknown; please replace it with the correct cutting mat.","0500_805C":"The grip cutting mat type does not match; please place a LightGrip cutting mat.","0500_805E":"Cutting module Serial Number error: unable to calibrate or make project.","0500_8060":"The current module on toolhead does not meet requirements. Please replace the module as per the on-screen instructions.","0500_8061":"No print plate detected. Please make sure it is placed correctly.","0500_8062":"The print plate marker was not detected. Please confirm the print plate is correctly positioned on the heatbed with all four corners aligned, and the marker is visible. If strong light is shining o...","0500_8063":"The platform is not detected during calibration; please make sure the Laser Platform is properly placed.","0500_8064":"Please place the Laser Platform correctly and ensure the rear markers are not blocked for laser calibration.","0500_8066":"The task requires a Cutting Platform, but the current one is a Laser Platform. Please replace it with a Cutting Platform (Cutting Protection Base + LightGrip cutting mat).","0500_8067":"Please place a LightGrip cutting mat on the cutting protection base.","0500_8068":"Please place the strong grip cutting mat correctly and ensure the marker is exposed.","0500_8069":"Unable to recognize the left and right hotends. They might be third party hotends, or the hotend marks may be dirty. Please manually set the hotend types.","0500_806A":"Unable to recognize the left and right hotends. They might be third party hotends, or the hotend marks may be dirty. Please set hotend types on printer screen before next print.","0500_806B":"Quick-release Lever is not locked. Please press down the external toolhead module to ensure it is properly seated, then push down the level to lock it in place.","0500_806C":"Please place the cutting platform correctly and ensure the marker is exposed.","0500_806D":"Material not detected. Please confirm placement and continue.","0500_806E":"Foreign objects detected on heatbed; please check and clean up the heatbed.","0500_806F":"The grip cutting mat type does not match; please place a StrongGrip cutting mat.","0500_8071":"No cutting platform was detected. Please confirm that it has been correctly placed.","0500_8072":"Live View camera is blocked","0500_8073":"Heatbed limit block is obstructed or contaminated. Please clean and ensure the limit block is visible, otherwise platform position offset detection may be inaccurate.","0500_8074":"The Laser Platform is offset. Please ensure that the four corners of the platform are aligned with the heatbed, and the marker is not obstructed.","0500_8077":"The visual marker was not detected. Please ensure the paper is properly placed.","0500_8078":"Current material does not match the sliced file settings. Please load the correct material and ensure the QR code on the material is not damaged or dirty.","0500_8079":"Please place the Laser Test Material (350g paperboard) and position support strips underneath to prevent material warping.","0500_807A":"The foreign object detection function is not working. You can continue the task or check the assistant for troubleshooting.","0500_807B":"Please place the cutting platform (cutting protection base + LightGrip cutting mat).","0500_807C":"Please place the cutting platform (cutting protection base + StrongGrip cutting mat).","0500_807D":"This task requires a Cutting Platform, but the current one is a Laser Platform. Please replace it with a Cutting Platform (Cutting Protection Base + StrongGrip Cutting Mat).","0500_807E":"Please place a StrongGrip cutting mat on the cutting protection base.","0500_8080":"The left and right hotends are not installed.","0500_8081":"The left and right hotends are not installed.","0500_8082":"Please remove the protective film on the Opaque Glossy Acrylic before processing","0500_8083":"Material is not allowed in Mounting Calibration. Please remove the material from the platform.","0500_8084":"The Live View Camera is dirty; please clean it and continue.","0500_8085":"Toolhead camera is obstructed","0500_8086":"Toolhead Camera is dirty, which affects the AI function; please clean the lens surface.","0500_8087":"BirdsEye camera is obstructed","0500_8088":"The Birdseye Camera is dirty","0500_8089":"Task paused due to Presence Check failed. Please check the printer to continue.","0500_808A":"The BirdsEye Camera is installed offset. Please refer to the assistant to reinstall it.","0500_808B":"The BirdsEye Camera setup failed. Please remove all objects and the mat on the heatbed to ensure the heatbed markers are visible. Meanwhile, please ensure the BirdsEye Camera is installed correctly...","0500_808C":"Detected build plate offset. Please align the build plate with the heatbed, and then continue.","0500_808D":"The Cutting Module offset calibration failed, which may result in inaccurate cuts. Please ensure the cutting material is properly positioned and check whether the cutting blade tip is worn.","0500_808E":"BirdsEye Camera initialization failed. The toolhead camera did not detect the Heatbed features. Please clean the Heatbed, remove all objects and pads, and ensure the bed markings are visible. Check...","0500_808F":"Nozzle camera lens is dirty, affecting AI monitoring. Clean the lens with a non-woven cloth and a small amount of alcohol. Beware of hotend heat; wait for it to cool before handling.","0500_8090":"Please attach the 80g White Printing Paper to the center area of the platform.","0500_8091":"The Cutting Module offset calibration failed, which may result in inaccurate cuts. Please ensure the 80g white printer paper(letter paper thickness) is properly positioned and check whether the cut...","0500_8092":"Toolhead Camera initialization failed. This print can still continue, but some AI functions will be disabled. If you encounter this issue again after restarting, please contact customer support.","0500_8093":"The nozzle silicone sleeve is not installed; there is a risk of temperature control failure. Please install it correctly and try again.","0500_80A0":"The visual encoder board was not detected. Please check if the board is properly placed and aligned at all four corners, and ensure the positioning markings are clear and free from wear.","0500_C010":"MicroSD Card read/write exception: please reinsert or replace the MicroSD Card.","0500_C032":"Laser/Cutting module connected to the toolhead. The drying process has been automatically stopped.","0500_C036":"This is a printing task. Please detach the Laser/Cutting Module from the Toolhead.","0500_C07F":"Device is busy and cannot perform this operation. To proceed, please pause or stop the current task.","0501_4017":"Binding failed. Please retry or restart the printer and retry.","0501_4018":"Binding configuration information parsing failed; please try again.","0501_4019":"The printer has already been bound. Please unbind it and try again.","0501_401A":"Cloud access failed. Possible reasons include network instability caused by interference, inability to access the internet, or router firewall configuration restrictions. You can try moving the pri...","0501_401B":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0501_401C":"Cloud access is rejected. If you have tried multiple times and are still failing, please contact customer support.","0501_401D":"Cloud access failed, which may be caused by network instability due to interference. You can try moving the printer closer to the router before you try again.","0501_401E":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0501_401F":"Authorization timed out. Please make sure that your phone or PC has access to the internet, and ensure that the Bambu Studio/Bambu Handy APP is running in the foreground during the binding operation.","0501_4020":"Cloud access rejected. If you have tried multiple times and are still failing, please contact customer support.","0501_4021":"Cloud access failed, which may be caused by network instability due to interference. You can try moving the printer closer to the router before you try again.","0501_4022":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0501_4023":"Cloud access rejected. If you have tried multiple times and are still failing, please contact customer support.","0501_4024":"Cloud access failed. Possible reasons include network instability caused by interference, inability to access the internet, or router firewall configuration restrictions. You can try moving the pri...","0501_4025":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0501_4026":"Cloud access rejected. If you have tried multiple times and are still failing, please contact customer support.","0501_4027":"Cloud access failed; this may be caused by network instability due to interference. You can try moving the printer closer to the router before you try again.","0501_4028":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0501_4029":"Cloud access is rejected. If you have tried multiple times and are still failing, please contact customer support.","0501_4031":"Device discovery binding is in progress, and the QR code cannot be displayed on the screen. You can wait for the binding to finish or abort the device discovery binding process in the APP/Studio an...","0501_4032":"QR code binding is in progress, so device discovery binding cannot be performed. You can scan the QR code on the screen for binding or exit the QR code display page on screen and try device discove...","0501_4033":"Your APP region does not match with your printer; please download the APP in the corresponding region and register your account again.","0501_4034":"The slicing progress has not been updated for a long time, and the printing task has exited. Please confirm the parameters and reinitiate printing.","0501_4035":"The device is in the process of binding and cannot respond to new binding requests.","0501_4038":"The regional settings do not match the printer; please check the printer's regional settings.","0501_4039":"Device login has expired; please try to bind again.","0501_4098":"The device cannot detect AMS B. Please reconnect the AMS cable or restart the printer.","0501_409D":"The firmware of AMS B does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0501_40A3":"AMS(or AMS lite) B communication is abnormal. Please reconnect the module cable or restart the printer.","0502_4001":"Current filament will be used in this print job. Settings cannot be changed.","0502_4002":"Please go to “Settings > Calibration” to run the Motion Accuracy Enhancement Calibration before turning on Motion Accuracy Enhancement mode.","0502_4003":"The printer is currently printing and the motion accuracy enhancement feature cannot be turned on or off.","0502_4004":"Some features are not supported by the current device. Please check the Studio feature settings or update the firmware to the latest version.","0502_4005":"The AMS has not been calibrated yet, so printing cannot be initiated.","0502_4006":"Unknown module detected; please try updating the firmware to the latest version.","0502_400D":"Failed to start a new task: filament loading/unloading not completed.","0502_400E":"Failed to start a new task: The nozzle cold pull was not completed.","0502_4013":"This device is not compatible with the 40W laser module. Please replace it with a 10W laser module or remove it.","0502_4098":"The device cannot detect AMS C. Please reconnect the AMS cable or restart the printer.","0502_409D":"The firmware of AMS C does not match the printer; the device cannot continue working. Please upgrade it on the 'Firmware' page.","0502_40A3":"AMS(or AMS lite) C communication is abnormal. Please reconnect the module cable or restart the printer.","0502_C00F":"The device is busy and cannot perform nozzle identification.","0502_C010":"Due to printer power limitations, printing, calibration, controls and other actions cannot be performed during AMS drying. Please stop the drying process before proceeding with any other operation.","0502_C011":"Currently in 2D production mode. Please continue the operation on the printer","0502_C012":"The task cannot be paused.","0502_C014":"The AMS Remaining Filament Estimation is enabled by default and cannot be disabled.","0502_C024":"The flow dynamic calibration records have exceeded the storage limit. Please delete some historical records in the slicer software before adding new calibration data.","0503_4098":"The device cannot detect AMS D. Please reconnect the AMS cable or restart the printer.","0503_409D":"The firmware of AMS D does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0503_40A3":"AMS(or AMS lite) D communication is abnormal. Please reconnect the module cable or restart the printer.","0580_4096":"The device cannot detect AMS-HT A. Please reconnect the AMS-HT cable or restart the printer.","0580_409C":"The firmware of AMS-HT A does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0580_40A2":"AMS-HT A communication is abnormal. Please reconnect the module cable or restart the printer.","0581_4096":"The device cannot detect AMS-HT B. Please reconnect the AMS-HT cable or restart the printer.","0581_409C":"The firmware of AMS-HT B does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0581_40A2":"AMS-HT B communication is abnormal. Please reconnect the module cable or restart the printer.","0582_4096":"The device cannot detect AMS-HT C. Please reconnect the AMS-HT cable or restart the printer.","0582_409C":"The firmware of AMS-HT C does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0582_40A2":"AMS-HT C communication is abnormal. Please reconnect the module cable or restart the printer.","0583_4096":"The device cannot detect AMS-HT D. Please reconnect the AMS-HT cable or restart the printer.","0583_409C":"The firmware of AMS-HT D does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0583_40A2":"AMS-HT D communication is abnormal. Please reconnect the module cable or restart the printer.","0584_4096":"The device cannot detect AMS-HT F. Please reconnect the AMS-HT cable or restart the printer.","0584_409C":"The firmware of AMS-HT E does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0584_40A2":"AMS-HT E communication is abnormal. Please reconnect the module cable or restart the printer.","0585_4096":"The device cannot detect AMS-HT E. Please reconnect the AMS-HT cable or restart the printer.","0585_409C":"The firmware of AMS-HT F does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0585_40A2":"AMS-HT F communication is abnormal. Please reconnect the module cable or restart the printer.","0586_4096":"The device cannot detect AMS-HT G. Please reconnect the AMS-HT cable or restart the printer.","0586_409C":"The firmware of AMS-HT G does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0586_40A2":"AMS-HT G communication is abnormal. Please reconnect the module cable or restart the printer.","0587_4096":"The device cannot detect AMS-HT H. Please reconnect the AMS-HT cable or restart the printer.","0587_409C":"The firmware of AMS-HT H does not match the printer; the device cannot continue working. Please upgrade it on the 'Firmware' page.","0587_40A2":"AMS-HT H communication is abnormal. Please reconnect the module cable or restart the printer.","05FE_8053":"The left nozzle is not matched with slicing file. Please initiate the print after re-slicing, or continue printing after replacing with the correct nozzle. Caution: the hotend temperature is high.","05FE_8069":"Unable to recognize the left hotend. It might be a third party hotend, or the hotend mark may be dirty. Please manually set the hotend type.","05FE_806A":"Unable to recognize the left hotend. It might be a third party hotend, or the hotend mark may be dirty. Please set hotend type on printer screen before next print.","05FE_8080":"The left hotend is not installed.","05FE_8081":"The left hotend is not installed.","05FF_8053":"The right nozzle is not matched with slicing file. Please initiate the print after re-slicing, or continue printing after replacing with the correct nozzle. Caution: the hotend temperature is high.","05FF_8069":"Unable to recognize the right hotend. It might be a third party hotend, or the hotend mark may be dirty. Please manually set the hotend type.","05FF_806A":"Unable to recognize the right hotend. It might be a third party hotend, or the hotend mark may be dirty. Please set hotend type on printer screen before next print.","05FF_8080":"The right hotend is not installed.","05FF_8081":"The right hotend is not installed.","0700_4001":"The AMS has been disabled for a print, but it still has filament loaded. Please unload the AMS filament and switch to the spool holder filament for printing.","0700_4025":"Failed to read the filament information.","0700_8001":"Failed to cut the filament. Please check the cutter.","0700_8002":"The cutter is stuck. Please make sure the cutter handle is out.","0700_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0700_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0700_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0700_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0700_8007":"Extruding filament failed. The extruder might be clogged.","0700_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS A to the extruder is properly connected.","0700_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0700_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0700_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0700_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0700_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0700_8017":"AMS A is drying. Please stop drying process before loading/unloading material.","0700_8021":"AMS setup failed; please refer to the assistant.","0700_8023":"AMS A cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0700_C069":"An error occurred during AMS A drying. Please go to Assistant for more details.","0700_C06A":"AMS A is reading RFID. Unable to start drying. Please try again later.","0700_C06B":"AMS A is changing filament. Unable to start drying. Please try again later.","0700_C06C":"AMS A is in Feed Assist Mode. Unable to start drying. Please try again later.","0700_C06D":"AMS A is assisting in filament insertion. Unable to start drying. Please try again later.","0700_C06E":"AMS A motor is performing self-test. Unable to start drying. Please try again later.","0701_4001":"Filament is still loaded from the AMS after it has been disabled. Please unload the filament, load from the spool holder, and restart printing.","0701_4025":"Failed to read the filament information.","0701_8001":"Failed to cut the filament. Please check the cutter.","0701_8002":"The cutter is stuck. Please make sure the cutter handle is out.","0701_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0701_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0701_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0701_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0701_8007":"Extruding filament failed. The extruder might be clogged.","0701_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS B to the extruder is properly connected.","0701_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0701_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0701_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0701_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0701_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0701_8017":"AMS B is drying. Please stop drying process before loading/unloading material.","0701_8021":"AMS setup failed; please refer to the assistant.","0701_8023":"AMS B cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0701_C069":"An error occurred during AMS B drying. Please go to Assistant for more details.","0701_C06A":"AMS B is reading RFID. Unable to start drying. Please try again later.","0701_C06B":"AMS B is changing filament. Unable to start drying. Please try again later.","0701_C06C":"AMS B is in Feed Assist Mode. Unable to start drying. Please try again later.","0701_C06D":"AMS B is assisting in filament insertion. Unable to start drying. Please try again later.","0701_C06E":"AMS B motor is performing self-test. Unable to start drying. Please try again later.","0702_4001":"Filament is still loaded from the AMS after it has been disabled. Please unload the filament, load from the spool holder, and restart printing.","0702_4025":"Failed to read the filament information.","0702_8001":"Failed to cut the filament. Please check the cutter.","0702_8002":"The cutter is stuck. Please make sure the cutter handle is out.","0702_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0702_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0702_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0702_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0702_8007":"Extruding filament failed. The extruder might be clogged.","0702_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS C to the extruder is properly connected.","0702_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0702_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0702_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0702_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0702_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0702_8017":"AMS C is drying. Please stop drying process before loading/unloading material.","0702_8021":"AMS setup failed; please refer to the assistant.","0702_8023":"AMS C cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0702_C069":"An error occurred during AMS C drying. Please go to Assistant for more details.","0702_C06A":"AMS C is reading RFID. Unable to start drying. Please try again later.","0702_C06B":"AMS C is changing filament. Unable to start drying. Please try again later.","0702_C06C":"AMS C is in Feed Assist Mode. Unable to start drying. Please try again later.","0702_C06D":"AMS C is assisting in filament insertion. Unable to start drying. Please try again later.","0702_C06E":"AMS C motor is performing self-test. Unable to start drying. Please try again later.","0703_4001":"Filament is still loaded from the AMS after it has been disabled. Please unload the filament, load from the spool holder, and restart printing.","0703_4025":"Failed to read the filament information.","0703_8001":"Failed to cut the filament. Please check the cutter.","0703_8002":"The cutter is stuck. Please make sure the cutter handle is out.","0703_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0703_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0703_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0703_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0703_8007":"Extruding filament failed. The extruder might be clogged.","0703_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS D to the extruder is properly connected.","0703_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0703_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0703_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0703_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0703_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0703_8017":"AMS D is drying. Please stop drying process before loading/unloading material.","0703_8021":"AMS setup failed; please refer to the assistant.","0703_8023":"AMS D cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0703_C069":"An error occurred during AMS D drying. Please go to Assistant for more details.","0703_C06A":"AMS D is reading RFID. Unable to start drying. Please try again later.","0703_C06B":"AMS D is changing filament. Unable to start drying. Please try again later.","0703_C06C":"AMS D is in Feed Assist Mode. Unable to start drying. Please try again later.","0703_C06D":"AMS D is assisting in filament insertion. Unable to start drying. Please try again later.","0703_C06E":"AMS D motor is performing self-test. Unable to start drying. Please try again later.","0704_4025":"Failed to read the filament information.","0704_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0704_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0704_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0704_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0704_8007":"Extruding filament failed. The extruder might be clogged.","0704_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS E to the extruder is properly connected.","0704_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0704_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0704_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0704_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0704_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0704_8021":"AMS setup failed; please refer to the assistant.","0704_8023":"AMS E cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0705_4025":"Failed to read the filament information.","0705_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0705_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0705_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0705_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0705_8007":"Extruding filament failed. The extruder might be clogged.","0705_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS F to the extruder is properly connected.","0705_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0705_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0705_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0705_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0705_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0705_8021":"AMS setup failed; please refer to the assistant.","0705_8023":"AMS F cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0706_4025":"Failed to read the filament information.","0706_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0706_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0706_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0706_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0706_8007":"Extruding filament failed. The extruder might be clogged.","0706_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS G to the extruder is properly connected.","0706_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0706_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0706_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0706_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0706_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0706_8021":"AMS setup failed; please refer to the assistant.","0706_8023":"AMS G cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0707_4025":"Failed to read the filament information.","0707_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0707_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0707_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0707_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0707_8007":"Extruding filament failed. The extruder might be clogged.","0707_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS H to the extruder is properly connected.","0707_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0707_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0707_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0707_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0707_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0707_8021":"AMS setup failed; please refer to the assistant.","0707_8023":"AMS H cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","07FE_8001":"Failed to cut the filament of the left extruder. Please check the cutter.","07FE_8002":"The cutter of the left extruder is stuck. Please pull out the cutter handle.","07FE_8003":"Please pull out the filament on the spool holder  of the left extruder. If this message persists, please check to see if there is filament broken in the extruder. (Connect a PTFE tube if you are ab...","07FE_8004":"Failed to pull back the filament from the left extruder. Please check whether the filament is stuck inside the extruder.","07FE_8005":"Failed to feed the filament outside the AMS. Please clip the end of the filament flat and check to see if the spool is stuck.","07FE_8006":"Please feed filament into the PTFE tube of the left extruder until it can not be pushed any farther.","07FE_8007":"Please observe the nozzle of the left extruder. If the filament has been extruded, select 'Continue'; if it has not, please push the filament forward slightly, and then select 'Retry'.","07FE_8010":"Check if the left external filament spool or filament is stuck.","07FE_8011":"The external filament connected to the left extruder has run out; please load a new filament.","07FE_8012":"Failed to get mapping table; please select 'Resume' to retry.","07FE_8013":"Timeout purging old filament of the left extruder: Please check if the filament is stuck or the extruder is clogged.","07FE_8020":"Extruder change failed; please refer to the assistant.","07FE_8021":"AMS setup failed; please refer to the assistant.","07FE_8024":"Extruder position calibration failed; please refer to the assistant.","07FE_8025":"Cold pull timed out. Please promptly operate or check whether the filament is broken inside the extruder, and click the Assistant for details.","07FE_8030":"The filament specified in the slicer has been used up. Printing is paused. Please go to the machine to replace the material and resume printing.","07FE_C003":"Please pull out the filament on the spool holder of the left extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube i...","07FE_C006":"Please feed filament into the PTFE tube of the left extruder until it can not be pushed any farther.","07FE_C008":"Please pull out the filament on the spool holder of the left extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube i...","07FE_C009":"Please feed filament into the PTFE tube of the left extruder until it can not be pushed any farther.","07FE_C00A":"Please observe the nozzle of the left extruder. If the filament has been extruded, select 'Continue'; if not, please push the filament forward slightly and then select 'Retry'.","07FE_C010":"Insert the filament (over 30cm long) until it stops. You might see slight smoke during flushing. After insertion, close the front door and top cover.","07FE_C011":"Please manually and slowly pull out the filament from the extruder. Then click “Continue”.","07FE_C012":"Press the black PTFE tube coupler and unplug the PTFE tube. After completing the operation, click 'Continue.'","07FF_4001":"Filament is still loaded from the AMS after it has been disabled. Please unload the filament, load from the spool holder, and restart printing.","07FF_8001":"Failed to cut the filament of the right extruder. Please check the cutter.","07FF_8002":"The cutter is stuck. Please make sure the cutter handle is out.","07FF_8003":"Please pull out the filament on the spool holder  of the right extruder. If this message persists, please check to see if there is filament broken in the extruder. (Connect a PTFE tube if you are a...","07FF_8004":"Failed to pull back the filament from the right extruder. Please check whether the filament is stuck inside the extruder.","07FF_8005":"Failed to feed the filament outside the AMS. Please clip the end of the filament flat and check to see if the spool is stuck.","07FF_8006":"Please feed filament into the PTFE tube of the right extruder until it can not be pushed any farther.","07FF_8007":"Please observe the nozzle of the right extruder. If the filament has been extruded, select 'Continue'; if it has not, please push the filament forward slightly, and then select 'Retry'.","07FF_8010":"Check if the external filament spool or filament is stuck.","07FF_8011":"External filament has run out; please load a new filament.","07FF_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","07FF_8013":"Timeout purging old filament of the right extruder: Please check if the filament is stuck or the extruder is clogged.","07FF_8020":"Extruder change failed; please refer to the assistant.","07FF_8021":"AMS setup failed; please refer to the assistant.","07FF_8024":"Extruder position calibration failed; please refer to the assistant.","07FF_8025":"Cold pull timed out. Please promptly operate or check whether the filament is broken inside the extruder, and click the Assistant for details.","07FF_8030":"The filament specified in the slicer has been used up. Printing is paused. Please go to the machine to replace the material and resume printing.","07FF_C003":"Please pull out the filament on the spool holder of the right extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube ...","07FF_C006":"Please feed filament into the PTFE tube of the right extruder until it can not be pushed any farther.","07FF_C008":"Please pull out the filament on the spool holder of the right extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube ...","07FF_C009":"Please feed filament into the PTFE tube of the right extruder until it can not be pushed any farther.","07FF_C00A":"Please observe the nozzle of the right extruder. If the filament has been extruded, select 'Continue'; if not, please push the filament forward slightly and then select 'Retry'.","07FF_C010":"Insert the filament (over 30cm long) until it stops. You might see slight smoke during flushing. After insertion, close the front door and top cover.","07FF_C011":"Hold the driven wheel bracket, slowly pull the filament from the extruder, then press 'Continue'.","07FF_C012":"Press the black PTFE tube coupler and unplug the PTFE tube. After completing the operation, click 'Continue.'","0C00_4020":"The setup of BirdsEye Camera failed. Please clear all objects and remove the mat. Make sure the marker is not obstructed. Meanwhile, clean both the BirdsEye Camera and Toolhead Camera, and remove a...","0C00_4021":"The setup of BirdsEye Camera failed; please reboot the printer.","0C00_4022":"The setup of BirdsEye Camera failed.  Please check if the laser module is working properly.","0C00_4024":"The Birdseye Camera is installed offset. Please refer to the assistant to reinstall it.","0C00_4025":"The Birdseye Camera is dirty. Please clean it and restart the process.","0C00_4026":"The Live View Camera initialization failed; please reboot the printer.","0C00_4027":"The Live View Camera calibration failed. Please refer to the assistant for details and recalibrate the camera after processing.","0C00_4029":"Material not detected. Please confirm placement and continue.","0C00_402A":"The visual marker was not detected. Please re-paste the paper in the correct position.","0C00_402C":"Device data link error. Please reboot the printer","0C00_402D":"The toolhead camera is not working properly; please reboot the device.","0C00_403D":"The vision encoder plate was not detected. Please confirm it is correctly positioned on the heatbed.","0C00_403E":"The high-precision nozzle offset calibration has failed, possibly due to a damaged pattern or the similarity of the colors of the two selected filaments. Please clear the printed pattern and replac...","0C00_4041":"Toolhead camera calibration failed. Please ensure the Calibration Marker on the heatbed or Height Calibration Marker on the homing area is clean and undamaged, then re-run the calibration process.","0C00_8001":"First layer defects were detected. If the defects are acceptable, select 'Resume' to resume the print job.","0C00_8005":"Purged filament has piled up in the waste chute, which may cause a tool head collision.","0C00_8009":"Build plate localization marker was not found.","0C00_800B":"The heatbed marker was not detected. Please clear all objects and remove the mat. Make sure the marker is not obstructed.","0C00_8015":"Objects detected on the platform; please clean them up in a timely manner.","0C00_8016":"The foreign object detection function is not working. You can continue the task or check assistant for solutions.","0C00_8017":"Foreign objects detected on the platform; please clean them up on time.","0C00_8018":"The foreign object detection function is not working. You can continue the task or view the assistant for troubleshooting.","0C00_8033":"Quick-release Lever is not locked. Please push it down to secure.","0C00_8034":"Liveview Camera initialization failed. This print can still continue, but some AI functions will be disabled. If you encounter this issue again after restarting, please contact customer support.","0C00_803F":"AI detected nozzle clumping. Please check the nozzle condition. Refer to assistant for solutions.","0C00_8040":"AI detected air-printing defect. Please check the hotend extrusion status. Refer to assistant for solutions.","0C00_8042":"The AI print monitor has detected a spaghetti defect. Please check the print and take the necessary action.","0C00_8043":"AI detected nozzle clumping. Please check the nozzle condition. Refer to assistant for solutions.","0C00_C003":"Possible defects were detected in the first layer.","0C00_C004":"Possible spaghetti failure was detected.","0C00_C006":"Purged filament may have piled up in the waste chute.","1000_C001":"High bed temperature may lead to filament clogging in the nozzle. You may open the chamber door.","1000_C002":"Printing CF material with stainless steel may cause nozzle damage.","1000_C003":"Enabling Timelapse in traditional mode may cause defects; please activate this feature as needed.","1001_4001":"Timelapse is not supported as Spiral Vase mode is enabled in slicing presets.","1001_4002":"Timelapse is not supported as the Print sequence is set to 'By object'.","1001_8003":"The time-lapse mode is set to Traditional in the slicing file. This may cause surface defects. Would you like to enable it?","1001_8004":"Prime Tower is not enabled and time-lapse mode is set to Smooth in slicing file. This may cause surface defects. Would you like to enable it?","1200_4001":"Filament is still loaded from the AMS when it has been disabled. Please unload AMS filament, load from spool holder, and restart print job.","1200_8001":"Cutting the filament failed. Please check to see if the cutter is stuck. Refer to the Assistant for solutions.","1200_8002":"The cutter is stuck. Please pull out the cutter handle.","1200_8003":"Failed to pull out the filament from the extruder. Please check whether the extruder is clogged or whether the filament is broken inside the extruder.","1200_8004":"Failed to pull back the filament from the toolhead. Please check whether the filament is stuck.","1200_8005":"The filament is not inserted. Please insert the filament.","1200_8006":"Unable to feed filament into the extruder. This could be due to tangled filament or a stuck spool. If not, please check if the AMS PTFE tube is connected.","1200_8007":"Failed to extrude the filament. This might be caused by clogged extruder or stuck filament. Refer to the Assistant for solutions.","1200_8010":"Filament or spool may be stuck.","1200_8011":"AMS filament has run out. Please insert a new filament into the same AMS slot.","1200_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1200_8013":"Timeout while purging old filament. Please check if the filament is stuck or the extruder clogged.","1200_8014":"The filament location in the toolhead was not found. Refer to the Assistant for solutions.","1200_8015":"Failed to pull out the filament from the toolhead. Please check if the filament is stuck, or if it is broken inside the extruder or PTFE tube.","1200_8016":"The extruder is not extruding normally. Refer to the Assistant for troubleshooting. There may be defects in this layer, but you may resume if the defects are acceptable.","1201_4001":"Filament is still loaded from the AMS when it has been disabled. Please unload AMS filament, load from spool holder, and restart print job.","1201_8001":"Failed to cut the filament. Please check the cutter.","1201_8002":"The cutter is stuck. Please pull out the cutter handle.","1201_8003":"Failed to pull out the filament from the extruder. Please check whether the extruder is clogged or whether the filament is broken inside the extruder.","1201_8004":"Failed to pull back the filament from the toolhead. Please check whether the filament is stuck.","1201_8005":"Failed to feed the filament. Please load the filament and then select 'Retry'.","1201_8006":"Failed to feed the filament into the toolhead. Please check whether the filament is stuck.","1201_8007":"Failed to extrude the filament. The extruder may be clogged or the filament may be stuck; please refer to HMS.","1201_8010":"Please check if the spool or filament is stuck.","1201_8011":"AMS filament has run out. Please insert a new filament into the same AMS slot.","1201_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1201_8013":"Timeout while purging old filament. Please check if the filament is stuck or the extruder clogged.","1201_8014":"Failed to check the filament location in the tool head; please refer to the HMS.","1201_8015":"Failed to pull back the filament from the toolhead. Please check if the filament is stuck or the filament is broken inside the extruder.","1201_8016":"The extruder is not extruding normally; please refer to the HMS. After trouble shooting, if the defects are acceptable, please resume printing.","1202_4001":"Filament is still loaded from the AMS when it has been disabled. Please unload AMS filament, load from spool holder, and restart print job.","1202_8001":"Failed to cut the filament. Please check the cutter.","1202_8002":"The cutter is stuck. Please pull out the cutter handle.","1202_8003":"Failed to pull out the filament from the extruder. Please check whether the extruder is clogged or whether the filament is broken inside the extruder.","1202_8004":"Failed to pull back the filament from the toolhead. Please check whether the filament is stuck.","1202_8005":"The filament is not inserted. Please insert the filament.","1202_8006":"Failed to feed the filament into the toolhead. Please check whether the filament is stuck.","1202_8007":"Failed to extrude the filament. The extruder may be clogged or the filament may be stuck; please refer to HMS.","1202_8010":"Please check if the spool or filament is stuck.","1202_8011":"AMS filament has run out. Please insert a new filament into the same AMS slot.","1202_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1202_8013":"Timeout while purging old filament. Please check if the filament is stuck or the extruder clogged.","1202_8014":"Failed to check the filament location in the tool head; please refer to the HMS.","1202_8015":"Failed to pull back the filament from the toolhead. Please check if the filament is stuck or is broken inside the extruder.","1202_8016":"The extruder is not extruding normally; please refer to the HMS. After trouble shooting, if the defects are acceptable, please resume printing.","1203_4001":"Filament is still loaded from the AMS when it has been disabled. Please unload AMS filament, load from spool holder, and restart print job.","1203_8001":"Failed to cut the filament. Please check the cutter.","1203_8002":"The cutter is stuck. Please pull out the cutter handle.","1203_8003":"Failed to pull out the filament from the extruder. Please check whether the extruder is clogged or whether the filament is broken inside the extruder.","1203_8004":"Failed to pull back the filament from the toolhead. Please check whether the filament is stuck.","1203_8005":"The filament is not inserted. Please insert the filament.","1203_8006":"Failed to feed the filament into the toolhead. Please check whether the filament is stuck.","1203_8007":"Failed to extrude the filament. The extruder may be clogged or the filament may be stuck; please refer to HMS.","1203_8010":"Please check if the spool or filament is stuck.","1203_8011":"AMS filament has run out. Please insert a new filament into the same AMS slot.","1203_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1203_8013":"Timeout while purging old filament. Please check if the filament is stuck or the extruder clogged.","1203_8014":"Failed to check the filament location in the tool head; please refer to the HMS.","1203_8015":"Failed to pull back the filament from the toolhead. Please check if the filament is stuck or is broken inside the extruder.","1203_8016":"The extruder is not extruding normally; please refer to the HMS. After trouble shooting, if the defects are acceptable, please resume printing.","12FF_4001":"Filament is still loaded from the AMS when it has been disabled. Please unload AMS filament, load from spool holder, and restart print job.","12FF_8001":"Failed to cut the filament. Please check the cutter.","12FF_8002":"The cutter is stuck. Please pull out the cutter handle.","12FF_8003":"Please pull out the filament on the spool holder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube if you are about to us...","12FF_8004":"Failed to pull back the filament from the toolhead. Please check whether the filament is stuck.","12FF_8005":"The filament is not inserted. Please insert the filament.","12FF_8006":"Please feed filament into the PTFE tube until it can not be pushed any farther.","12FF_8007":"Check nozzle. Select 'Done' if filament was extruded, otherwise push filament forward slightly and select 'Retry.'","12FF_8010":"Please check if the filament or the spool is stuck.","12FF_8011":"AMS filament has run out. Please insert a new filament into the same AMS slot.","12FF_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","12FF_8013":"Timeout while purging old filament. Please check if the filament is stuck or the extruder clogged.","12FF_C003":"Please pull out the filament on the spool holder. If this message persists, please check to see if there is filament broken in the extruder or PTFE Tube. (Connect a PTFE tube if you are about to us...","12FF_C006":"Please feed filament into the PTFE tube until it can not be pushed any farther.","1800_4025":"Failed to read the filament information.","1800_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1800_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1800_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1800_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1800_8007":"Extruding filament failed. The extruder might be clogged.","1800_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT A to the extruder is properly connected.","1800_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1800_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1800_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1800_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1800_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1800_8017":"AMS-HT A is drying. Please stop drying process before loading/unloading material.","1800_8021":"AMS setup failed; please refer to the assistant.","1800_8023":"AMS-HT A cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1800_C069":"An error occurred during AMS-HT A drying. Please go to Assistant for more details.","1800_C06A":"AMS-HT A is reading RFID. Unable to start drying. Please try again later.","1800_C06B":"AMS-HT A is changing filament. Unable to start drying. Please try again later.","1800_C06C":"AMS-HT A is in Feed Assist Mode. Unable to start drying. Please try again later.","1800_C06D":"AMS-HT A is assisting in filament insertion. Unable to start drying. Please try again later.","1800_C06E":"AMS-HT A motor is performing self-test. Unable to start drying. Please try again later.","1801_4025":"Failed to read the filament information.","1801_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1801_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1801_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1801_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1801_8007":"Extruding filament failed. The extruder might be clogged.","1801_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT B to the extruder is properly connected.","1801_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1801_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1801_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1801_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1801_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1801_8017":"AMS-HT B is drying. Please stop drying process before loading/unloading material.","1801_8021":"AMS setup failed; please refer to the assistant.","1801_8023":"AMS-HT B cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1801_C069":"An error occurred during AMS-HT B drying. Please go to Assistant for more details.","1801_C06A":"AMS-HT B is reading RFID. Unable to start drying. Please try again later.","1801_C06B":"AMS-HT B is changing filament. Unable to start drying. Please try again later.","1801_C06C":"AMS-HT B is in Feed Assist Mode. Unable to start drying. Please try again later.","1801_C06D":"AMS-HT B is assisting in filament insertion. Unable to start drying. Please try again later.","1801_C06E":"AMS-HT B motor is performing self-test. Unable to start drying. Please try again later.","1802_4025":"Failed to read the filament information.","1802_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1802_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1802_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1802_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1802_8007":"Extruding filament failed. The extruder might be clogged.","1802_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT C to the extruder is properly connected.","1802_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1802_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1802_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1802_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1802_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1802_8017":"AMS-HT C is drying. Please stop drying process before loading/unloading material.","1802_8021":"AMS setup failed; please refer to the assistant.","1802_8023":"AMS-HT C cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1802_C069":"An error occurred during AMS-HT C drying. Please go to Assistant for more details.","1802_C06A":"AMS-HT C is reading RFID. Unable to start drying. Please try again later.","1802_C06B":"AMS-HT C is changing filament. Unable to start drying. Please try again later.","1802_C06C":"AMS-HT C is in Feed Assist Mode. Unable to start drying. Please try again later.","1802_C06D":"AMS-HT C is assisting in filament insertion. Unable to start drying. Please try again later.","1802_C06E":"AMS-HT C motor is performing self-test. Unable to start drying. Please try again later.","1803_4025":"Failed to read the filament information.","1803_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1803_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1803_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1803_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1803_8007":"Extruding filament failed. The extruder might be clogged.","1803_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT D to the extruder is properly connected.","1803_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1803_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1803_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1803_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1803_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1803_8017":"AMS-HT D is drying. Please stop drying process before loading/unloading material.","1803_8021":"AMS setup failed; please refer to the assistant.","1803_8023":"AMS-HT D cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1803_C069":"An error occurred during AMS-HT D drying. Please go to Assistant for more details.","1803_C06A":"AMS-HT D is reading RFID. Unable to start drying. Please try again later.","1803_C06B":"AMS-HT D is changing filament. Unable to start drying. Please try again later.","1803_C06C":"AMS-HT D is in Feed Assist Mode. Unable to start drying. Please try again later.","1803_C06D":"AMS-HT D is assisting in filament insertion. Unable to start drying. Please try again later.","1803_C06E":"AMS-HT D motor is performing self-test. Unable to start drying. Please try again later.","1804_4025":"Failed to read the filament information.","1804_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1804_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1804_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1804_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1804_8007":"Extruding filament failed. The extruder might be clogged.","1804_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT E to the extruder is properly connected.","1804_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1804_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1804_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1804_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1804_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1804_8021":"AMS setup failed; please refer to the assistant.","1804_8023":"AMS-HT E cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1804_C069":"An error occurred during AMS-HT E drying. Please go to Assistant for more details.","1804_C06A":"AMS-HT E is reading RFID. Unable to start drying. Please try again later.","1804_C06B":"AMS-HT E is changing filament. Unable to start drying. Please try again later.","1804_C06C":"AMS-HT E is in Feed Assist Mode. Unable to start drying. Please try again later.","1804_C06D":"AMS-HT E is assisting in filament insertion. Unable to start drying. Please try again later.","1804_C06E":"AMS-HT E motor is performing self-test. Unable to start drying. Please try again later.","1805_4025":"Failed to read the filament information.","1805_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1805_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1805_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1805_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1805_8007":"Extruding filament failed. The extruder might be clogged.","1805_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT F to the extruder is properly connected.","1805_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1805_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1805_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1805_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1805_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1805_8021":"AMS setup failed; please refer to the assistant.","1805_8023":"AMS-HT F cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1805_C069":"An error occurred during AMS-HT F drying. Please go to Assistant for more details.","1805_C06A":"AMS-HT F is reading RFID. Unable to start drying. Please try again later.","1805_C06B":"AMS-HT F is changing filament. Unable to start drying. Please try again later.","1805_C06C":"AMS-HT F is in Feed Assist Mode. Unable to start drying. Please try again later.","1805_C06D":"AMS-HT F is assisting in filament insertion. Unable to start drying. Please try again later.","1805_C06E":"AMS-HT F motor is performing self-test. Unable to start drying. Please try again later.","1806_4025":"Failed to read the filament information.","1806_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1806_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1806_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1806_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1806_8007":"Extruding filament failed. The extruder might be clogged.","1806_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT G to the extruder is properly connected.","1806_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1806_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1806_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1806_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1806_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1806_8021":"AMS setup failed; please refer to the assistant.","1806_8023":"AMS-HT G cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1806_C069":"An error occurred during AMS-HT G drying. Please go to Assistant for more details.","1806_C06A":"AMS-HT G is reading RFID. Unable to start drying. Please try again later.","1806_C06B":"AMS-HT G is changing filament. Unable to start drying. Please try again later.","1806_C06C":"AMS-HT G is in Feed Assist Mode. Unable to start drying. Please try again later.","1806_C06D":"AMS-HT G is assisting in filament insertion. Unable to start drying. Please try again later.","1806_C06E":"AMS-HT G motor is performing self-test. Unable to start drying. Please try again later.","1807_4025":"Failed to read the filament information.","1807_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1807_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1807_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1807_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1807_8007":"Extruding filament failed. The extruder might be clogged.","1807_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT H to the extruder is properly connected.","1807_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1807_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1807_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1807_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1807_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1807_8021":"AMS setup failed; please refer to the assistant.","1807_8023":"AMS-HT H cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1807_C069":"An error occurred during AMS-HT H drying. Please go to Assistant for more details.","1807_C06A":"AMS-HT H is reading RFID. Unable to start drying. Please try again later.","1807_C06B":"AMS-HT H is changing filament. Unable to start drying. Please try again later.","1807_C06C":"AMS-HT H is in Feed Assist Mode. Unable to start drying. Please try again later.","1807_C06D":"AMS-HT H is assisting in filament insertion. Unable to start drying. Please try again later.","1807_C06E":"AMS-HT H motor is performing self-test. Unable to start drying. Please try again later.","18FE_8001":"Failed to cut the filament of the left extruder. Please check the cutter.","18FE_8002":"The cutter of the left extruder is stuck. Please pull out the cutter handle.","18FE_8003":"Please pull out the filament on the spool holder  of the left extruder. If this message persists, please check to see if there is filament broken in the extruder. (Connect a PTFE tube if you are ab...","18FE_8004":"Failed to pull back the filament from the left extruder. Please check whether the filament is stuck inside the extruder.","18FE_8005":"Failed to feed the filament outside the AMS-HT. Please clip the end of the filament flat and check to see if the spool is stuck.","18FE_8006":"Please feed filament into the PTFE tube of the left extruder until it can not be pushed any farther.","18FE_8007":"Please observe the nozzle of the left extruder. If the filament has been extruded, select 'Continue'; if it has not, please push the filament forward slightly, and then select 'Retry'.","18FE_8011":"The external filament connected to the left extruder has run out; please load a new filament.","18FE_8012":"Failed to get mapping table; please select 'Resume' to retry.","18FE_8013":"Timeout purging old filament of the left extruder: Please check if the filament is stuck or the extruder is clogged.","18FE_8020":"Extruder change failed; please refer to the assistant.","18FE_8021":"AMS setup failed; please refer to the assistant.","18FE_8024":"Extruder position calibration failed; please refer to the assistant.","18FE_C003":"Please pull out the filament on the spool holder of the left extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube i...","18FE_C006":"Please feed filament into the PTFE tube of the left extruder until it can not be pushed any farther.","18FE_C008":"Please pull out the filament on the spool holder of the left extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube i...","18FE_C009":"Please feed filament into the PTFE tube of the left extruder until it can not be pushed any farther.","18FE_C00A":"Please observe the nozzle of the left extruder. If the filament has been extruded, select 'Continue'; if not, please push the filament forward slightly and then select 'Retry'.","18FF_8001":"Failed to cut the filament of the right extruder. Please check the cutter.","18FF_8002":"The cutter of the right extruder is stuck. Please pull out the cutter handle.","18FF_8003":"Please pull out the filament on the spool holder  of the right extruder. If this message persists, please check to see if there is filament broken in the extruder. (Connect a PTFE tube if you are a...","18FF_8004":"Failed to pull back the filament from the right extruder. Please check whether the filament is stuck inside the extruder.","18FF_8005":"Failed to feed the filament outside the AMS-HT. Please clip the end of the filament flat and check to see if the spool is stuck.","18FF_8006":"Please feed filament into the PTFE tube of the right extruder until it can not be pushed any farther.","18FF_8007":"Please observe the nozzle of the right extruder. If the filament has been extruded, select 'Continue'; if it has not, please push the filament forward slightly, and then select 'Retry'.","18FF_8011":"The external filament connected to the right extruder has run out; please load a new filament.","18FF_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","18FF_8013":"Timeout purging old filament of the right extruder: Please check if the filament is stuck or the extruder is clogged.","18FF_8020":"Extruder change failed; please refer to the assistant.","18FF_8021":"AMS setup failed; please refer to the assistant.","18FF_8024":"Extruder position calibration failed; please refer to the assistant.","18FF_C003":"Please pull out the filament on the spool holder of the right extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube ...","18FF_C006":"Please feed filament into the PTFE tube of the right extruder until it can not be pushed any farther.","18FF_C008":"Please pull out the filament on the spool holder of the right extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube ...","18FF_C009":"Please feed filament into the PTFE tube of the right extruder until it can not be pushed any farther.","18FF_C00A":"Please observe the nozzle of the right extruder. If the filament has been extruded, select 'Continue'; if not, please push the filament forward slightly and then select 'Retry'."};function bve(t){switch(t){case 1:return{label:"Fatal",color:"text-red-500",bgColor:"bg-red-500/20",Icon:Cn};case 2:return{label:"Serious",color:"text-red-400",bgColor:"bg-red-500/15",Icon:Cn};case 3:return{label:"Warning",color:"text-orange-400",bgColor:"bg-orange-500/20",Icon:Oa};default:return{label:"Info",color:"text-blue-400",bgColor:"bg-blue-500/20",Icon:Cs}}}function MF(t,e){const n=t>>16&65535||(t>>8&255)<<8|t&255,r=e&65535;return`${n.toString(16).padStart(4,"0").toUpperCase()}_${r.toString(16).padStart(4,"0").toUpperCase()}`}function cm(t){return t.filter(e=>{const n=parseInt(e.code.replace("0x",""),16)||0,r=MF(e.attr,n);return jF[r]!==void 0})}function xve(){return"https://wiki.bambulab.com/en/hms/home"}function yve({printerName:t,errors:e,onClose:n,printerId:r,hasPermission:i}){const{t:s}=_t(),{showToast:o}=rn(),l=ot({mutationFn:()=>oe.clearHMSErrors(r),onSuccess:()=>{o(s("hmsErrors.clearSuccess"),"success"),n()},onError:()=>{o(s("hmsErrors.clearFailed"),"error")}}),c=e.filter(d=>{const u=parseInt(d.code.replace("0x",""),16)||0,m=MF(d.attr,u);return jF[m]!==void 0});return w.useEffect(()=>{const d=u=>{u.key==="Escape"&&n()};return window.addEventListener("keydown",d),()=>window.removeEventListener("keydown",d)},[n]),a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4",children:a.jsxs("div",{className:"bg-bambu-dark-secondary rounded-lg shadow-xl max-w-lg w-full max-h-[80vh] flex flex-col",children:[a.jsxs("div",{className:"flex items-center justify-between p-4 border-b border-bambu-dark-tertiary",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(Cn,{className:"w-5 h-5 text-orange-400"}),a.jsx("h2",{className:"text-lg font-semibold text-white",children:s("hmsErrors.title",{name:t})})]}),a.jsx("button",{onClick:n,className:"p-1 hover:bg-bambu-dark-tertiary rounded-lg transition-colors",children:a.jsx(Bt,{className:"w-5 h-5 text-bambu-gray"})})]}),a.jsx("div",{className:"flex-1 overflow-y-auto p-4",children:c.length===0?a.jsxs("div",{className:"text-center py-8 text-bambu-gray",children:[a.jsx(Oa,{className:"w-12 h-12 mx-auto mb-3 opacity-30"}),a.jsx("p",{children:s("hmsErrors.noErrors")})]}):a.jsx("div",{className:"space-y-3",children:c.map((d,u)=>{const{label:m,color:p,bgColor:f,Icon:x}=bve(d.severity),v=parseInt(d.code.replace("0x",""),16)||0,b=MF(d.attr,v),g=jF[b],S=xve(),N=b.replace("_","-");return a.jsx("div",{className:`p-4 rounded-lg ${f} border border-white/10`,children:a.jsxs("div",{className:"flex items-start gap-3",children:[a.jsx(x,{className:`w-5 h-5 ${p} flex-shrink-0 mt-0.5`}),a.jsxs("div",{className:"flex-1 min-w-0",children:[a.jsxs("div",{className:"flex items-center gap-2 mb-1",children:[a.jsxs("span",{className:`font-mono text-sm ${p}`,children:["[",N,"]"]}),a.jsx("span",{className:`text-xs px-2 py-0.5 rounded-full ${f} ${p}`,children:m})]}),a.jsx("p",{className:"text-sm text-bambu-gray mb-2",children:g}),a.jsxs("a",{href:S,target:"_blank",rel:"noopener noreferrer",className:"inline-flex items-center gap-1 text-xs text-bambu-green hover:underline",children:[a.jsx(Ar,{className:"w-3 h-3"}),s("hmsErrors.viewOnWiki")]})]})]})},`${d.code}-${u}`)})})}),a.jsxs("div",{className:"p-4 border-t border-bambu-dark-tertiary flex items-center justify-between gap-3",children:[a.jsx("p",{className:"text-xs text-bambu-gray",children:s("hmsErrors.clearInstructions")}),c.length>0&&a.jsxs("button",{onClick:()=>l.mutate(),disabled:!i("printers:control")||l.isPending,className:"flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium rounded-lg bg-red-500/20 text-red-400 hover:bg-red-500/30 transition-colors disabled:opacity-50 disabled:cursor-not-allowed flex-shrink-0",children:[l.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Zt,{className:"w-4 h-4"}),s("hmsErrors.clearErrors")]})]})]})})}const vve=[{key:"printing",dot:"bg-bambu-green"},{key:"paused",dot:"bg-status-warning"},{key:"finished",dot:"bg-blue-400"},{key:"idle",dot:"bg-bambu-green"},{key:"error",dot:"bg-status-error"},{key:"offline",dot:"bg-gray-400"}];function wve({selectedIds:t,printers:e,onClose:n,onSelectAll:r,onSelectByLocation:i,onSelectByState:s,onAction:o,actionPending:l}){const{t:c}=_t(),{hasPermission:d}=gr(),u=tn(),[m,p]=w.useState(!1),[f,x]=w.useState(!1),v=Array.from(t).map(E=>({id:E,status:u.getQueryData(["printerStatus",E])})),b=v.some(({status:E})=>E?.connected&&E.state==="RUNNING"),g=v.some(({status:E})=>E?.connected&&E.state==="PAUSE"),S=b||g,N=v.some(({status:E})=>!!(E?.connected&&E.awaiting_plate_clear)),P=v.some(({status:E})=>!E?.connected||!E.hms_errors?!1:cm(E.hms_errors).length>0),C=d("printers:control"),A=d("printers:clear_plate"),T=[...new Set(e.map(E=>E.location).filter(E=>!!E))].sort(),F={printing:0,paused:0,finished:0,idle:0,error:0,offline:0};e.forEach(E=>{const $=u.getQueryData(["printerStatus",E.id]);if(!$||!$.connected){F.offline++;return}const z=$.hms_errors?cm($.hms_errors).length>0:!1;switch(z&&F.error++,$.state){case"RUNNING":F.printing++;break;case"PAUSE":F.paused++;break;case"FINISH":F.finished++;break;case"FAILED":z||F.finished++;break;default:F.idle++;break}});const k={printing:c("printers.status.printing"),paused:c("printers.status.paused","Paused"),finished:c("printers.status.finished","Finished"),idle:c("printers.status.idle"),error:c("printers.status.problem"),offline:c("printers.status.offline")};return a.jsxs("div",{className:"fixed bottom-6 left-1/2 -translate-x-1/2 z-40 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl px-4 py-3 flex items-center gap-3 flex-wrap",children:[a.jsx(De,{variant:"secondary",size:"sm",onClick:n,children:a.jsx(Bt,{className:"w-4 h-4"})}),a.jsx("div",{className:"w-px h-6 bg-bambu-dark-tertiary"}),a.jsx("span",{className:"text-white font-medium text-sm",children:c("printers.bulk.selected",{count:t.size})}),a.jsx("div",{className:"w-px h-6 bg-bambu-dark-tertiary"}),a.jsx(De,{variant:"secondary",size:"sm",onClick:r,children:c("printers.bulk.selectAll")}),a.jsxs("div",{className:"relative",children:[a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>{x(!f),p(!1)},children:[c("printers.bulk.selectByState"),a.jsx(zn,{className:`w-3 h-3 transition-transform ${f?"rotate-180":""}`})]}),f&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-10",onClick:()=>x(!1)}),a.jsx("div",{className:"absolute bottom-full mb-2 left-0 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg z-20 py-1",children:vve.filter(({key:E})=>F[E]>0).map(({key:E,dot:$})=>a.jsxs("button",{onClick:()=>{s(E),x(!1)},className:"w-full text-left px-3 py-2 text-sm text-bambu-gray-light hover:bg-bambu-dark-tertiary hover:text-white transition-colors flex items-center gap-2",children:[a.jsx("div",{className:`w-2 h-2 rounded-full ${$}`}),k[E],a.jsx("span",{className:"ml-auto text-bambu-gray text-xs",children:F[E]})]},E))})]})]}),T.length>0&&a.jsxs("div",{className:"relative",children:[a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>{p(!m),x(!1)},children:[c("printers.bulk.selectByLocation"),a.jsx(zn,{className:`w-3 h-3 transition-transform ${m?"rotate-180":""}`})]}),m&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-10",onClick:()=>p(!1)}),a.jsx("div",{className:"absolute bottom-full mb-2 left-0 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg z-20 py-1",children:T.map(E=>a.jsx("button",{onClick:()=>{i(E),p(!1)},className:"w-full text-left px-3 py-2 text-sm text-bambu-gray-light hover:bg-bambu-dark-tertiary hover:text-white transition-colors",children:E},E))})]})]}),a.jsx("div",{className:"w-px h-6 bg-bambu-dark-tertiary"}),a.jsxs(De,{size:"sm",className:"bg-red-500 hover:bg-red-600",onClick:()=>o("stop"),disabled:l||!C||!S,title:C?S?void 0:c("printers.bulk.noneApplicable"):c("printers.permission.noControl"),children:[a.jsx(mo,{className:"w-3.5 h-3.5"}),c("printers.bulk.actions.stop")]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>o("pause"),disabled:l||!C||!b,title:C?b?void 0:c("printers.bulk.noneApplicable"):c("printers.permission.noControl"),children:[a.jsx(cS,{className:"w-3.5 h-3.5"}),c("printers.bulk.actions.pause")]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>o("resume"),disabled:l||!C||!g,title:C?g?void 0:c("printers.bulk.noneApplicable"):c("printers.permission.noControl"),children:[a.jsx(rs,{className:"w-3.5 h-3.5"}),c("printers.bulk.actions.resume")]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>o("clearHMS"),disabled:l||!C||!P,title:C?P?void 0:c("printers.bulk.noneApplicable"):c("printers.permission.noControl"),children:[a.jsx(nfe,{className:"w-3.5 h-3.5"}),c("printers.bulk.actions.clearHMS")]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>o("clearPlate"),disabled:l||!A||!N,title:A?N?void 0:c("printers.bulk.noneApplicable"):c("printers.permission.noControl"),children:[a.jsx(kge,{className:"w-3.5 h-3.5"}),c("printers.bulk.actions.clearPlate")]})]})}const lO="181",Ix={ROTATE:0,DOLLY:1,PAN:2},Tx={ROTATE:0,PAN:1,DOLLY_PAN:2,DOLLY_ROTATE:3},Sve=0,s6=1,_ve=2,MJ=1,kve=2,Uu=3,_p=0,Lo=1,Td=2,dm=0,Ox=1,o6=2,l6=3,c6=4,Nve=5,Df=100,Cve=101,Pve=102,Tve=103,Ave=104,jve=200,Mve=201,Eve=202,Dve=203,EF=204,DF=205,Fve=206,Rve=207,Lve=208,Ive=209,Ove=210,zve=211,Uve=212,Bve=213,Hve=214,FF=0,RF=1,LF=2,Jx=3,IF=4,OF=5,zF=6,UF=7,cO=0,qve=1,$ve=2,up=0,Vve=1,Gve=2,Wve=3,Kve=4,Xve=5,Yve=6,Qve=7,EJ=300,Zx=301,ey=302,BF=303,HF=304,aT=306,qF=1e3,em=1001,$F=1002,cl=1003,Jve=1004,a1=1005,Zl=1006,BM=1007,Uf=1008,$d=1009,DJ=1010,FJ=1011,hw=1012,dO=1013,wg=1014,tm=1015,Ay=1016,uO=1017,mO=1018,pw=1020,RJ=35902,LJ=35899,IJ=1021,OJ=1022,Hc=1023,fw=1026,gw=1027,zJ=1028,hO=1029,pO=1030,fO=1031,gO=1033,Wk=33776,Kk=33777,Xk=33778,Yk=33779,VF=35840,GF=35841,WF=35842,KF=35843,XF=36196,YF=37492,QF=37496,JF=37808,ZF=37809,eR=37810,tR=37811,nR=37812,rR=37813,aR=37814,iR=37815,sR=37816,oR=37817,lR=37818,cR=37819,dR=37820,uR=37821,mR=36492,hR=36494,pR=36495,fR=36283,gR=36284,bR=36285,xR=36286,Zve=3200,e0e=3201,UJ=0,t0e=1,Bh="",al="srgb",ty="srgb-linear",IN="linear",Zr="srgb",Eb=7680,d6=519,n0e=512,r0e=513,a0e=514,BJ=515,i0e=516,s0e=517,o0e=518,l0e=519,u6=35044,m6="300 es",Ed=2e3,ON=2001;function HJ(t){for(let e=t.length-1;e>=0;--e)if(t[e]>=65535)return!0;return!1}function zN(t){return document.createElementNS("http://www.w3.org/1999/xhtml",t)}function c0e(){const t=zN("canvas");return t.style.display="block",t}const h6={};function p6(...t){const e="THREE."+t.shift();console.log(e,...t)}function Hn(...t){const e="THREE."+t.shift();console.warn(e,...t)}function si(...t){const e="THREE."+t.shift();console.error(e,...t)}function bw(...t){const e=t.join(" ");e in h6||(h6[e]=!0,Hn(...t))}function d0e(t,e,n){return new Promise(function(r,i){function s(){switch(t.clientWaitSync(e,t.SYNC_FLUSH_COMMANDS_BIT,0)){case t.WAIT_FAILED:i();break;case t.TIMEOUT_EXPIRED:setTimeout(s,n);break;default:r()}}setTimeout(s,n)})}let Wg=class{addEventListener(e,n){this._listeners===void 0&&(this._listeners={});const r=this._listeners;r[e]===void 0&&(r[e]=[]),r[e].indexOf(n)===-1&&r[e].push(n)}hasEventListener(e,n){const r=this._listeners;return r===void 0?!1:r[e]!==void 0&&r[e].indexOf(n)!==-1}removeEventListener(e,n){const r=this._listeners;if(r===void 0)return;const i=r[e];if(i!==void 0){const s=i.indexOf(n);s!==-1&&i.splice(s,1)}}dispatchEvent(e){const n=this._listeners;if(n===void 0)return;const r=n[e.type];if(r!==void 0){e.target=this;const i=r.slice(0);for(let s=0,o=i.length;s<o;s++)i[s].call(this,e);e.target=null}}};const Fs=["00","01","02","03","04","05","06","07","08","09","0a","0b","0c","0d","0e","0f","10","11","12","13","14","15","16","17","18","19","1a","1b","1c","1d","1e","1f","20","21","22","23","24","25","26","27","28","29","2a","2b","2c","2d","2e","2f","30","31","32","33","34","35","36","37","38","39","3a","3b","3c","3d","3e","3f","40","41","42","43","44","45","46","47","48","49","4a","4b","4c","4d","4e","4f","50","51","52","53","54","55","56","57","58","59","5a","5b","5c","5d","5e","5f","60","61","62","63","64","65","66","67","68","69","6a","6b","6c","6d","6e","6f","70","71","72","73","74","75","76","77","78","79","7a","7b","7c","7d","7e","7f","80","81","82","83","84","85","86","87","88","89","8a","8b","8c","8d","8e","8f","90","91","92","93","94","95","96","97","98","99","9a","9b","9c","9d","9e","9f","a0","a1","a2","a3","a4","a5","a6","a7","a8","a9","aa","ab","ac","ad","ae","af","b0","b1","b2","b3","b4","b5","b6","b7","b8","b9","ba","bb","bc","bd","be","bf","c0","c1","c2","c3","c4","c5","c6","c7","c8","c9","ca","cb","cc","cd","ce","cf","d0","d1","d2","d3","d4","d5","d6","d7","d8","d9","da","db","dc","dd","de","df","e0","e1","e2","e3","e4","e5","e6","e7","e8","e9","ea","eb","ec","ed","ee","ef","f0","f1","f2","f3","f4","f5","f6","f7","f8","f9","fa","fb","fc","fd","fe","ff"],Qk=Math.PI/180,yR=180/Math.PI;function pS(){const t=Math.random()*4294967295|0,e=Math.random()*4294967295|0,n=Math.random()*4294967295|0,r=Math.random()*4294967295|0;return(Fs[t&255]+Fs[t>>8&255]+Fs[t>>16&255]+Fs[t>>24&255]+"-"+Fs[e&255]+Fs[e>>8&255]+"-"+Fs[e>>16&15|64]+Fs[e>>24&255]+"-"+Fs[n&63|128]+Fs[n>>8&255]+"-"+Fs[n>>16&255]+Fs[n>>24&255]+Fs[r&255]+Fs[r>>8&255]+Fs[r>>16&255]+Fs[r>>24&255]).toLowerCase()}function fr(t,e,n){return Math.max(e,Math.min(n,t))}function u0e(t,e){return(t%e+e)%e}function HM(t,e,n){return(1-n)*t+n*e}function Lv(t,e){switch(e.constructor){case Float32Array:return t;case Uint32Array:return t/4294967295;case Uint16Array:return t/65535;case Uint8Array:return t/255;case Int32Array:return Math.max(t/2147483647,-1);case Int16Array:return Math.max(t/32767,-1);case Int8Array:return Math.max(t/127,-1);default:throw new Error("Invalid component type.")}}function Ao(t,e){switch(e.constructor){case Float32Array:return t;case Uint32Array:return Math.round(t*4294967295);case Uint16Array:return Math.round(t*65535);case Uint8Array:return Math.round(t*255);case Int32Array:return Math.round(t*2147483647);case Int16Array:return Math.round(t*32767);case Int8Array:return Math.round(t*127);default:throw new Error("Invalid component type.")}}const m0e={DEG2RAD:Qk};let tr=class qJ{constructor(e=0,n=0){qJ.prototype.isVector2=!0,this.x=e,this.y=n}get width(){return this.x}set width(e){this.x=e}get height(){return this.y}set height(e){this.y=e}set(e,n){return this.x=e,this.y=n,this}setScalar(e){return this.x=e,this.y=e,this}setX(e){return this.x=e,this}setY(e){return this.y=e,this}setComponent(e,n){switch(e){case 0:this.x=n;break;case 1:this.y=n;break;default:throw new Error("index is out of range: "+e)}return this}getComponent(e){switch(e){case 0:return this.x;case 1:return this.y;default:throw new Error("index is out of range: "+e)}}clone(){return new this.constructor(this.x,this.y)}copy(e){return this.x=e.x,this.y=e.y,this}add(e){return this.x+=e.x,this.y+=e.y,this}addScalar(e){return this.x+=e,this.y+=e,this}addVectors(e,n){return this.x=e.x+n.x,this.y=e.y+n.y,this}addScaledVector(e,n){return this.x+=e.x*n,this.y+=e.y*n,this}sub(e){return this.x-=e.x,this.y-=e.y,this}subScalar(e){return this.x-=e,this.y-=e,this}subVectors(e,n){return this.x=e.x-n.x,this.y=e.y-n.y,this}multiply(e){return this.x*=e.x,this.y*=e.y,this}multiplyScalar(e){return this.x*=e,this.y*=e,this}divide(e){return this.x/=e.x,this.y/=e.y,this}divideScalar(e){return this.multiplyScalar(1/e)}applyMatrix3(e){const n=this.x,r=this.y,i=e.elements;return this.x=i[0]*n+i[3]*r+i[6],this.y=i[1]*n+i[4]*r+i[7],this}min(e){return this.x=Math.min(this.x,e.x),this.y=Math.min(this.y,e.y),this}max(e){return this.x=Math.max(this.x,e.x),this.y=Math.max(this.y,e.y),this}clamp(e,n){return this.x=fr(this.x,e.x,n.x),this.y=fr(this.y,e.y,n.y),this}clampScalar(e,n){return this.x=fr(this.x,e,n),this.y=fr(this.y,e,n),this}clampLength(e,n){const r=this.length();return this.divideScalar(r||1).multiplyScalar(fr(r,e,n))}floor(){return this.x=Math.floor(this.x),this.y=Math.floor(this.y),this}ceil(){return this.x=Math.ceil(this.x),this.y=Math.ceil(this.y),this}round(){return this.x=Math.round(this.x),this.y=Math.round(this.y),this}roundToZero(){return this.x=Math.trunc(this.x),this.y=Math.trunc(this.y),this}negate(){return this.x=-this.x,this.y=-this.y,this}dot(e){return this.x*e.x+this.y*e.y}cross(e){return this.x*e.y-this.y*e.x}lengthSq(){return this.x*this.x+this.y*this.y}length(){return Math.sqrt(this.x*this.x+this.y*this.y)}manhattanLength(){return Math.abs(this.x)+Math.abs(this.y)}normalize(){return this.divideScalar(this.length()||1)}angle(){return Math.atan2(-this.y,-this.x)+Math.PI}angleTo(e){const n=Math.sqrt(this.lengthSq()*e.lengthSq());if(n===0)return Math.PI/2;const r=this.dot(e)/n;return Math.acos(fr(r,-1,1))}distanceTo(e){return Math.sqrt(this.distanceToSquared(e))}distanceToSquared(e){const n=this.x-e.x,r=this.y-e.y;return n*n+r*r}manhattanDistanceTo(e){return Math.abs(this.x-e.x)+Math.abs(this.y-e.y)}setLength(e){return this.normalize().multiplyScalar(e)}lerp(e,n){return this.x+=(e.x-this.x)*n,this.y+=(e.y-this.y)*n,this}lerpVectors(e,n,r){return this.x=e.x+(n.x-e.x)*r,this.y=e.y+(n.y-e.y)*r,this}equals(e){return e.x===this.x&&e.y===this.y}fromArray(e,n=0){return this.x=e[n],this.y=e[n+1],this}toArray(e=[],n=0){return e[n]=this.x,e[n+1]=this.y,e}fromBufferAttribute(e,n){return this.x=e.getX(n),this.y=e.getY(n),this}rotateAround(e,n){const r=Math.cos(n),i=Math.sin(n),s=this.x-e.x,o=this.y-e.y;return this.x=s*r-o*i+e.x,this.y=s*i+o*r+e.y,this}random(){return this.x=Math.random(),this.y=Math.random(),this}*[Symbol.iterator](){yield this.x,yield this.y}},Sg=class{constructor(e=0,n=0,r=0,i=1){this.isQuaternion=!0,this._x=e,this._y=n,this._z=r,this._w=i}static slerpFlat(e,n,r,i,s,o,l){let c=r[i+0],d=r[i+1],u=r[i+2],m=r[i+3],p=s[o+0],f=s[o+1],x=s[o+2],v=s[o+3];if(l<=0){e[n+0]=c,e[n+1]=d,e[n+2]=u,e[n+3]=m;return}if(l>=1){e[n+0]=p,e[n+1]=f,e[n+2]=x,e[n+3]=v;return}if(m!==v||c!==p||d!==f||u!==x){let b=c*p+d*f+u*x+m*v;b<0&&(p=-p,f=-f,x=-x,v=-v,b=-b);let g=1-l;if(b<.9995){const S=Math.acos(b),N=Math.sin(S);g=Math.sin(g*S)/N,l=Math.sin(l*S)/N,c=c*g+p*l,d=d*g+f*l,u=u*g+x*l,m=m*g+v*l}else{c=c*g+p*l,d=d*g+f*l,u=u*g+x*l,m=m*g+v*l;const S=1/Math.sqrt(c*c+d*d+u*u+m*m);c*=S,d*=S,u*=S,m*=S}}e[n]=c,e[n+1]=d,e[n+2]=u,e[n+3]=m}static multiplyQuaternionsFlat(e,n,r,i,s,o){const l=r[i],c=r[i+1],d=r[i+2],u=r[i+3],m=s[o],p=s[o+1],f=s[o+2],x=s[o+3];return e[n]=l*x+u*m+c*f-d*p,e[n+1]=c*x+u*p+d*m-l*f,e[n+2]=d*x+u*f+l*p-c*m,e[n+3]=u*x-l*m-c*p-d*f,e}get x(){return this._x}set x(e){this._x=e,this._onChangeCallback()}get y(){return this._y}set y(e){this._y=e,this._onChangeCallback()}get z(){return this._z}set z(e){this._z=e,this._onChangeCallback()}get w(){return this._w}set w(e){this._w=e,this._onChangeCallback()}set(e,n,r,i){return this._x=e,this._y=n,this._z=r,this._w=i,this._onChangeCallback(),this}clone(){return new this.constructor(this._x,this._y,this._z,this._w)}copy(e){return this._x=e.x,this._y=e.y,this._z=e.z,this._w=e.w,this._onChangeCallback(),this}setFromEuler(e,n=!0){const r=e._x,i=e._y,s=e._z,o=e._order,l=Math.cos,c=Math.sin,d=l(r/2),u=l(i/2),m=l(s/2),p=c(r/2),f=c(i/2),x=c(s/2);switch(o){case"XYZ":this._x=p*u*m+d*f*x,this._y=d*f*m-p*u*x,this._z=d*u*x+p*f*m,this._w=d*u*m-p*f*x;break;case"YXZ":this._x=p*u*m+d*f*x,this._y=d*f*m-p*u*x,this._z=d*u*x-p*f*m,this._w=d*u*m+p*f*x;break;case"ZXY":this._x=p*u*m-d*f*x,this._y=d*f*m+p*u*x,this._z=d*u*x+p*f*m,this._w=d*u*m-p*f*x;break;case"ZYX":this._x=p*u*m-d*f*x,this._y=d*f*m+p*u*x,this._z=d*u*x-p*f*m,this._w=d*u*m+p*f*x;break;case"YZX":this._x=p*u*m+d*f*x,this._y=d*f*m+p*u*x,this._z=d*u*x-p*f*m,this._w=d*u*m-p*f*x;break;case"XZY":this._x=p*u*m-d*f*x,this._y=d*f*m-p*u*x,this._z=d*u*x+p*f*m,this._w=d*u*m+p*f*x;break;default:Hn("Quaternion: .setFromEuler() encountered an unknown order: "+o)}return n===!0&&this._onChangeCallback(),this}setFromAxisAngle(e,n){const r=n/2,i=Math.sin(r);return this._x=e.x*i,this._y=e.y*i,this._z=e.z*i,this._w=Math.cos(r),this._onChangeCallback(),this}setFromRotationMatrix(e){const n=e.elements,r=n[0],i=n[4],s=n[8],o=n[1],l=n[5],c=n[9],d=n[2],u=n[6],m=n[10],p=r+l+m;if(p>0){const f=.5/Math.sqrt(p+1);this._w=.25/f,this._x=(u-c)*f,this._y=(s-d)*f,this._z=(o-i)*f}else if(r>l&&r>m){const f=2*Math.sqrt(1+r-l-m);this._w=(u-c)/f,this._x=.25*f,this._y=(i+o)/f,this._z=(s+d)/f}else if(l>m){const f=2*Math.sqrt(1+l-r-m);this._w=(s-d)/f,this._x=(i+o)/f,this._y=.25*f,this._z=(c+u)/f}else{const f=2*Math.sqrt(1+m-r-l);this._w=(o-i)/f,this._x=(s+d)/f,this._y=(c+u)/f,this._z=.25*f}return this._onChangeCallback(),this}setFromUnitVectors(e,n){let r=e.dot(n)+1;return r<1e-8?(r=0,Math.abs(e.x)>Math.abs(e.z)?(this._x=-e.y,this._y=e.x,this._z=0,this._w=r):(this._x=0,this._y=-e.z,this._z=e.y,this._w=r)):(this._x=e.y*n.z-e.z*n.y,this._y=e.z*n.x-e.x*n.z,this._z=e.x*n.y-e.y*n.x,this._w=r),this.normalize()}angleTo(e){return 2*Math.acos(Math.abs(fr(this.dot(e),-1,1)))}rotateTowards(e,n){const r=this.angleTo(e);if(r===0)return this;const i=Math.min(1,n/r);return this.slerp(e,i),this}identity(){return this.set(0,0,0,1)}invert(){return this.conjugate()}conjugate(){return this._x*=-1,this._y*=-1,this._z*=-1,this._onChangeCallback(),this}dot(e){return this._x*e._x+this._y*e._y+this._z*e._z+this._w*e._w}lengthSq(){return this._x*this._x+this._y*this._y+this._z*this._z+this._w*this._w}length(){return Math.sqrt(this._x*this._x+this._y*this._y+this._z*this._z+this._w*this._w)}normalize(){let e=this.length();return e===0?(this._x=0,this._y=0,this._z=0,this._w=1):(e=1/e,this._x=this._x*e,this._y=this._y*e,this._z=this._z*e,this._w=this._w*e),this._onChangeCallback(),this}multiply(e){return this.multiplyQuaternions(this,e)}premultiply(e){return this.multiplyQuaternions(e,this)}multiplyQuaternions(e,n){const r=e._x,i=e._y,s=e._z,o=e._w,l=n._x,c=n._y,d=n._z,u=n._w;return this._x=r*u+o*l+i*d-s*c,this._y=i*u+o*c+s*l-r*d,this._z=s*u+o*d+r*c-i*l,this._w=o*u-r*l-i*c-s*d,this._onChangeCallback(),this}slerp(e,n){if(n<=0)return this;if(n>=1)return this.copy(e);let r=e._x,i=e._y,s=e._z,o=e._w,l=this.dot(e);l<0&&(r=-r,i=-i,s=-s,o=-o,l=-l);let c=1-n;if(l<.9995){const d=Math.acos(l),u=Math.sin(d);c=Math.sin(c*d)/u,n=Math.sin(n*d)/u,this._x=this._x*c+r*n,this._y=this._y*c+i*n,this._z=this._z*c+s*n,this._w=this._w*c+o*n,this._onChangeCallback()}else this._x=this._x*c+r*n,this._y=this._y*c+i*n,this._z=this._z*c+s*n,this._w=this._w*c+o*n,this.normalize();return this}slerpQuaternions(e,n,r){return this.copy(e).slerp(n,r)}random(){const e=2*Math.PI*Math.random(),n=2*Math.PI*Math.random(),r=Math.random(),i=Math.sqrt(1-r),s=Math.sqrt(r);return this.set(i*Math.sin(e),i*Math.cos(e),s*Math.sin(n),s*Math.cos(n))}equals(e){return e._x===this._x&&e._y===this._y&&e._z===this._z&&e._w===this._w}fromArray(e,n=0){return this._x=e[n],this._y=e[n+1],this._z=e[n+2],this._w=e[n+3],this._onChangeCallback(),this}toArray(e=[],n=0){return e[n]=this._x,e[n+1]=this._y,e[n+2]=this._z,e[n+3]=this._w,e}fromBufferAttribute(e,n){return this._x=e.getX(n),this._y=e.getY(n),this._z=e.getZ(n),this._w=e.getW(n),this._onChangeCallback(),this}toJSON(){return this.toArray()}_onChange(e){return this._onChangeCallback=e,this}_onChangeCallback(){}*[Symbol.iterator](){yield this._x,yield this._y,yield this._z,yield this._w}},Nt=class $J{constructor(e=0,n=0,r=0){$J.prototype.isVector3=!0,this.x=e,this.y=n,this.z=r}set(e,n,r){return r===void 0&&(r=this.z),this.x=e,this.y=n,this.z=r,this}setScalar(e){return this.x=e,this.y=e,this.z=e,this}setX(e){return this.x=e,this}setY(e){return this.y=e,this}setZ(e){return this.z=e,this}setComponent(e,n){switch(e){case 0:this.x=n;break;case 1:this.y=n;break;case 2:this.z=n;break;default:throw new Error("index is out of range: "+e)}return this}getComponent(e){switch(e){case 0:return this.x;case 1:return this.y;case 2:return this.z;default:throw new Error("index is out of range: "+e)}}clone(){return new this.constructor(this.x,this.y,this.z)}copy(e){return this.x=e.x,this.y=e.y,this.z=e.z,this}add(e){return this.x+=e.x,this.y+=e.y,this.z+=e.z,this}addScalar(e){return this.x+=e,this.y+=e,this.z+=e,this}addVectors(e,n){return this.x=e.x+n.x,this.y=e.y+n.y,this.z=e.z+n.z,this}addScaledVector(e,n){return this.x+=e.x*n,this.y+=e.y*n,this.z+=e.z*n,this}sub(e){return this.x-=e.x,this.y-=e.y,this.z-=e.z,this}subScalar(e){return this.x-=e,this.y-=e,this.z-=e,this}subVectors(e,n){return this.x=e.x-n.x,this.y=e.y-n.y,this.z=e.z-n.z,this}multiply(e){return this.x*=e.x,this.y*=e.y,this.z*=e.z,this}multiplyScalar(e){return this.x*=e,this.y*=e,this.z*=e,this}multiplyVectors(e,n){return this.x=e.x*n.x,this.y=e.y*n.y,this.z=e.z*n.z,this}applyEuler(e){return this.applyQuaternion(f6.setFromEuler(e))}applyAxisAngle(e,n){return this.applyQuaternion(f6.setFromAxisAngle(e,n))}applyMatrix3(e){const n=this.x,r=this.y,i=this.z,s=e.elements;return this.x=s[0]*n+s[3]*r+s[6]*i,this.y=s[1]*n+s[4]*r+s[7]*i,this.z=s[2]*n+s[5]*r+s[8]*i,this}applyNormalMatrix(e){return this.applyMatrix3(e).normalize()}applyMatrix4(e){const n=this.x,r=this.y,i=this.z,s=e.elements,o=1/(s[3]*n+s[7]*r+s[11]*i+s[15]);return this.x=(s[0]*n+s[4]*r+s[8]*i+s[12])*o,this.y=(s[1]*n+s[5]*r+s[9]*i+s[13])*o,this.z=(s[2]*n+s[6]*r+s[10]*i+s[14])*o,this}applyQuaternion(e){const n=this.x,r=this.y,i=this.z,s=e.x,o=e.y,l=e.z,c=e.w,d=2*(o*i-l*r),u=2*(l*n-s*i),m=2*(s*r-o*n);return this.x=n+c*d+o*m-l*u,this.y=r+c*u+l*d-s*m,this.z=i+c*m+s*u-o*d,this}project(e){return this.applyMatrix4(e.matrixWorldInverse).applyMatrix4(e.projectionMatrix)}unproject(e){return this.applyMatrix4(e.projectionMatrixInverse).applyMatrix4(e.matrixWorld)}transformDirection(e){const n=this.x,r=this.y,i=this.z,s=e.elements;return this.x=s[0]*n+s[4]*r+s[8]*i,this.y=s[1]*n+s[5]*r+s[9]*i,this.z=s[2]*n+s[6]*r+s[10]*i,this.normalize()}divide(e){return this.x/=e.x,this.y/=e.y,this.z/=e.z,this}divideScalar(e){return this.multiplyScalar(1/e)}min(e){return this.x=Math.min(this.x,e.x),this.y=Math.min(this.y,e.y),this.z=Math.min(this.z,e.z),this}max(e){return this.x=Math.max(this.x,e.x),this.y=Math.max(this.y,e.y),this.z=Math.max(this.z,e.z),this}clamp(e,n){return this.x=fr(this.x,e.x,n.x),this.y=fr(this.y,e.y,n.y),this.z=fr(this.z,e.z,n.z),this}clampScalar(e,n){return this.x=fr(this.x,e,n),this.y=fr(this.y,e,n),this.z=fr(this.z,e,n),this}clampLength(e,n){const r=this.length();return this.divideScalar(r||1).multiplyScalar(fr(r,e,n))}floor(){return this.x=Math.floor(this.x),this.y=Math.floor(this.y),this.z=Math.floor(this.z),this}ceil(){return this.x=Math.ceil(this.x),this.y=Math.ceil(this.y),this.z=Math.ceil(this.z),this}round(){return this.x=Math.round(this.x),this.y=Math.round(this.y),this.z=Math.round(this.z),this}roundToZero(){return this.x=Math.trunc(this.x),this.y=Math.trunc(this.y),this.z=Math.trunc(this.z),this}negate(){return this.x=-this.x,this.y=-this.y,this.z=-this.z,this}dot(e){return this.x*e.x+this.y*e.y+this.z*e.z}lengthSq(){return this.x*this.x+this.y*this.y+this.z*this.z}length(){return Math.sqrt(this.x*this.x+this.y*this.y+this.z*this.z)}manhattanLength(){return Math.abs(this.x)+Math.abs(this.y)+Math.abs(this.z)}normalize(){return this.divideScalar(this.length()||1)}setLength(e){return this.normalize().multiplyScalar(e)}lerp(e,n){return this.x+=(e.x-this.x)*n,this.y+=(e.y-this.y)*n,this.z+=(e.z-this.z)*n,this}lerpVectors(e,n,r){return this.x=e.x+(n.x-e.x)*r,this.y=e.y+(n.y-e.y)*r,this.z=e.z+(n.z-e.z)*r,this}cross(e){return this.crossVectors(this,e)}crossVectors(e,n){const r=e.x,i=e.y,s=e.z,o=n.x,l=n.y,c=n.z;return this.x=i*c-s*l,this.y=s*o-r*c,this.z=r*l-i*o,this}projectOnVector(e){const n=e.lengthSq();if(n===0)return this.set(0,0,0);const r=e.dot(this)/n;return this.copy(e).multiplyScalar(r)}projectOnPlane(e){return qM.copy(this).projectOnVector(e),this.sub(qM)}reflect(e){return this.sub(qM.copy(e).multiplyScalar(2*this.dot(e)))}angleTo(e){const n=Math.sqrt(this.lengthSq()*e.lengthSq());if(n===0)return Math.PI/2;const r=this.dot(e)/n;return Math.acos(fr(r,-1,1))}distanceTo(e){return Math.sqrt(this.distanceToSquared(e))}distanceToSquared(e){const n=this.x-e.x,r=this.y-e.y,i=this.z-e.z;return n*n+r*r+i*i}manhattanDistanceTo(e){return Math.abs(this.x-e.x)+Math.abs(this.y-e.y)+Math.abs(this.z-e.z)}setFromSpherical(e){return this.setFromSphericalCoords(e.radius,e.phi,e.theta)}setFromSphericalCoords(e,n,r){const i=Math.sin(n)*e;return this.x=i*Math.sin(r),this.y=Math.cos(n)*e,this.z=i*Math.cos(r),this}setFromCylindrical(e){return this.setFromCylindricalCoords(e.radius,e.theta,e.y)}setFromCylindricalCoords(e,n,r){return this.x=e*Math.sin(n),this.y=r,this.z=e*Math.cos(n),this}setFromMatrixPosition(e){const n=e.elements;return this.x=n[12],this.y=n[13],this.z=n[14],this}setFromMatrixScale(e){const n=this.setFromMatrixColumn(e,0).length(),r=this.setFromMatrixColumn(e,1).length(),i=this.setFromMatrixColumn(e,2).length();return this.x=n,this.y=r,this.z=i,this}setFromMatrixColumn(e,n){return this.fromArray(e.elements,n*4)}setFromMatrix3Column(e,n){return this.fromArray(e.elements,n*3)}setFromEuler(e){return this.x=e._x,this.y=e._y,this.z=e._z,this}setFromColor(e){return this.x=e.r,this.y=e.g,this.z=e.b,this}equals(e){return e.x===this.x&&e.y===this.y&&e.z===this.z}fromArray(e,n=0){return this.x=e[n],this.y=e[n+1],this.z=e[n+2],this}toArray(e=[],n=0){return e[n]=this.x,e[n+1]=this.y,e[n+2]=this.z,e}fromBufferAttribute(e,n){return this.x=e.getX(n),this.y=e.getY(n),this.z=e.getZ(n),this}random(){return this.x=Math.random(),this.y=Math.random(),this.z=Math.random(),this}randomDirection(){const e=Math.random()*Math.PI*2,n=Math.random()*2-1,r=Math.sqrt(1-n*n);return this.x=r*Math.cos(e),this.y=n,this.z=r*Math.sin(e),this}*[Symbol.iterator](){yield this.x,yield this.y,yield this.z}};const qM=new Nt,f6=new Sg;let ar=class VJ{constructor(e,n,r,i,s,o,l,c,d){VJ.prototype.isMatrix3=!0,this.elements=[1,0,0,0,1,0,0,0,1],e!==void 0&&this.set(e,n,r,i,s,o,l,c,d)}set(e,n,r,i,s,o,l,c,d){const u=this.elements;return u[0]=e,u[1]=i,u[2]=l,u[3]=n,u[4]=s,u[5]=c,u[6]=r,u[7]=o,u[8]=d,this}identity(){return this.set(1,0,0,0,1,0,0,0,1),this}copy(e){const n=this.elements,r=e.elements;return n[0]=r[0],n[1]=r[1],n[2]=r[2],n[3]=r[3],n[4]=r[4],n[5]=r[5],n[6]=r[6],n[7]=r[7],n[8]=r[8],this}extractBasis(e,n,r){return e.setFromMatrix3Column(this,0),n.setFromMatrix3Column(this,1),r.setFromMatrix3Column(this,2),this}setFromMatrix4(e){const n=e.elements;return this.set(n[0],n[4],n[8],n[1],n[5],n[9],n[2],n[6],n[10]),this}multiply(e){return this.multiplyMatrices(this,e)}premultiply(e){return this.multiplyMatrices(e,this)}multiplyMatrices(e,n){const r=e.elements,i=n.elements,s=this.elements,o=r[0],l=r[3],c=r[6],d=r[1],u=r[4],m=r[7],p=r[2],f=r[5],x=r[8],v=i[0],b=i[3],g=i[6],S=i[1],N=i[4],P=i[7],C=i[2],A=i[5],T=i[8];return s[0]=o*v+l*S+c*C,s[3]=o*b+l*N+c*A,s[6]=o*g+l*P+c*T,s[1]=d*v+u*S+m*C,s[4]=d*b+u*N+m*A,s[7]=d*g+u*P+m*T,s[2]=p*v+f*S+x*C,s[5]=p*b+f*N+x*A,s[8]=p*g+f*P+x*T,this}multiplyScalar(e){const n=this.elements;return n[0]*=e,n[3]*=e,n[6]*=e,n[1]*=e,n[4]*=e,n[7]*=e,n[2]*=e,n[5]*=e,n[8]*=e,this}determinant(){const e=this.elements,n=e[0],r=e[1],i=e[2],s=e[3],o=e[4],l=e[5],c=e[6],d=e[7],u=e[8];return n*o*u-n*l*d-r*s*u+r*l*c+i*s*d-i*o*c}invert(){const e=this.elements,n=e[0],r=e[1],i=e[2],s=e[3],o=e[4],l=e[5],c=e[6],d=e[7],u=e[8],m=u*o-l*d,p=l*c-u*s,f=d*s-o*c,x=n*m+r*p+i*f;if(x===0)return this.set(0,0,0,0,0,0,0,0,0);const v=1/x;return e[0]=m*v,e[1]=(i*d-u*r)*v,e[2]=(l*r-i*o)*v,e[3]=p*v,e[4]=(u*n-i*c)*v,e[5]=(i*s-l*n)*v,e[6]=f*v,e[7]=(r*c-d*n)*v,e[8]=(o*n-r*s)*v,this}transpose(){let e;const n=this.elements;return e=n[1],n[1]=n[3],n[3]=e,e=n[2],n[2]=n[6],n[6]=e,e=n[5],n[5]=n[7],n[7]=e,this}getNormalMatrix(e){return this.setFromMatrix4(e).invert().transpose()}transposeIntoArray(e){const n=this.elements;return e[0]=n[0],e[1]=n[3],e[2]=n[6],e[3]=n[1],e[4]=n[4],e[5]=n[7],e[6]=n[2],e[7]=n[5],e[8]=n[8],this}setUvTransform(e,n,r,i,s,o,l){const c=Math.cos(s),d=Math.sin(s);return this.set(r*c,r*d,-r*(c*o+d*l)+o+e,-i*d,i*c,-i*(-d*o+c*l)+l+n,0,0,1),this}scale(e,n){return this.premultiply($M.makeScale(e,n)),this}rotate(e){return this.premultiply($M.makeRotation(-e)),this}translate(e,n){return this.premultiply($M.makeTranslation(e,n)),this}makeTranslation(e,n){return e.isVector2?this.set(1,0,e.x,0,1,e.y,0,0,1):this.set(1,0,e,0,1,n,0,0,1),this}makeRotation(e){const n=Math.cos(e),r=Math.sin(e);return this.set(n,-r,0,r,n,0,0,0,1),this}makeScale(e,n){return this.set(e,0,0,0,n,0,0,0,1),this}equals(e){const n=this.elements,r=e.elements;for(let i=0;i<9;i++)if(n[i]!==r[i])return!1;return!0}fromArray(e,n=0){for(let r=0;r<9;r++)this.elements[r]=e[r+n];return this}toArray(e=[],n=0){const r=this.elements;return e[n]=r[0],e[n+1]=r[1],e[n+2]=r[2],e[n+3]=r[3],e[n+4]=r[4],e[n+5]=r[5],e[n+6]=r[6],e[n+7]=r[7],e[n+8]=r[8],e}clone(){return new this.constructor().fromArray(this.elements)}};const $M=new ar,g6=new ar().set(.4123908,.3575843,.1804808,.212639,.7151687,.0721923,.0193308,.1191948,.9505322),b6=new ar().set(3.2409699,-1.5373832,-.4986108,-.9692436,1.8759675,.0415551,.0556301,-.203977,1.0569715);function h0e(){const t={enabled:!0,workingColorSpace:ty,spaces:{},convert:function(i,s,o){return this.enabled===!1||s===o||!s||!o||(this.spaces[s].transfer===Zr&&(i.r=um(i.r),i.g=um(i.g),i.b=um(i.b)),this.spaces[s].primaries!==this.spaces[o].primaries&&(i.applyMatrix3(this.spaces[s].toXYZ),i.applyMatrix3(this.spaces[o].fromXYZ)),this.spaces[o].transfer===Zr&&(i.r=zx(i.r),i.g=zx(i.g),i.b=zx(i.b))),i},workingToColorSpace:function(i,s){return this.convert(i,this.workingColorSpace,s)},colorSpaceToWorking:function(i,s){return this.convert(i,s,this.workingColorSpace)},getPrimaries:function(i){return this.spaces[i].primaries},getTransfer:function(i){return i===Bh?IN:this.spaces[i].transfer},getToneMappingMode:function(i){return this.spaces[i].outputColorSpaceConfig.toneMappingMode||"standard"},getLuminanceCoefficients:function(i,s=this.workingColorSpace){return i.fromArray(this.spaces[s].luminanceCoefficients)},define:function(i){Object.assign(this.spaces,i)},_getMatrix:function(i,s,o){return i.copy(this.spaces[s].toXYZ).multiply(this.spaces[o].fromXYZ)},_getDrawingBufferColorSpace:function(i){return this.spaces[i].outputColorSpaceConfig.drawingBufferColorSpace},_getUnpackColorSpace:function(i=this.workingColorSpace){return this.spaces[i].workingColorSpaceConfig.unpackColorSpace},fromWorkingColorSpace:function(i,s){return bw("ColorManagement: .fromWorkingColorSpace() has been renamed to .workingToColorSpace()."),t.workingToColorSpace(i,s)},toWorkingColorSpace:function(i,s){return bw("ColorManagement: .toWorkingColorSpace() has been renamed to .colorSpaceToWorking()."),t.colorSpaceToWorking(i,s)}},e=[.64,.33,.3,.6,.15,.06],n=[.2126,.7152,.0722],r=[.3127,.329];return t.define({[ty]:{primaries:e,whitePoint:r,transfer:IN,toXYZ:g6,fromXYZ:b6,luminanceCoefficients:n,workingColorSpaceConfig:{unpackColorSpace:al},outputColorSpaceConfig:{drawingBufferColorSpace:al}},[al]:{primaries:e,whitePoint:r,transfer:Zr,toXYZ:g6,fromXYZ:b6,luminanceCoefficients:n,outputColorSpaceConfig:{drawingBufferColorSpace:al}}}),t}const Fr=h0e();function um(t){return t<.04045?t*.0773993808:Math.pow(t*.9478672986+.0521327014,2.4)}function zx(t){return t<.0031308?t*12.92:1.055*Math.pow(t,.41666)-.055}let Db,p0e=class{static getDataURL(e,n="image/png"){if(/^data:/i.test(e.src)||typeof HTMLCanvasElement>"u")return e.src;let r;if(e instanceof HTMLCanvasElement)r=e;else{Db===void 0&&(Db=zN("canvas")),Db.width=e.width,Db.height=e.height;const i=Db.getContext("2d");e instanceof ImageData?i.putImageData(e,0,0):i.drawImage(e,0,0,e.width,e.height),r=Db}return r.toDataURL(n)}static sRGBToLinear(e){if(typeof HTMLImageElement<"u"&&e instanceof HTMLImageElement||typeof HTMLCanvasElement<"u"&&e instanceof HTMLCanvasElement||typeof ImageBitmap<"u"&&e instanceof ImageBitmap){const n=zN("canvas");n.width=e.width,n.height=e.height;const r=n.getContext("2d");r.drawImage(e,0,0,e.width,e.height);const i=r.getImageData(0,0,e.width,e.height),s=i.data;for(let o=0;o<s.length;o++)s[o]=um(s[o]/255)*255;return r.putImageData(i,0,0),n}else if(e.data){const n=e.data.slice(0);for(let r=0;r<n.length;r++)n instanceof Uint8Array||n instanceof Uint8ClampedArray?n[r]=Math.floor(um(n[r]/255)*255):n[r]=um(n[r]);return{data:n,width:e.width,height:e.height}}else return Hn("ImageUtils.sRGBToLinear(): Unsupported image type. No color space conversion applied."),e}},f0e=0,bO=class{constructor(e=null){this.isSource=!0,Object.defineProperty(this,"id",{value:f0e++}),this.uuid=pS(),this.data=e,this.dataReady=!0,this.version=0}getSize(e){const n=this.data;return typeof HTMLVideoElement<"u"&&n instanceof HTMLVideoElement?e.set(n.videoWidth,n.videoHeight,0):n instanceof VideoFrame?e.set(n.displayHeight,n.displayWidth,0):n!==null?e.set(n.width,n.height,n.depth||0):e.set(0,0,0),e}set needsUpdate(e){e===!0&&this.version++}toJSON(e){const n=e===void 0||typeof e=="string";if(!n&&e.images[this.uuid]!==void 0)return e.images[this.uuid];const r={uuid:this.uuid,url:""},i=this.data;if(i!==null){let s;if(Array.isArray(i)){s=[];for(let o=0,l=i.length;o<l;o++)i[o].isDataTexture?s.push(VM(i[o].image)):s.push(VM(i[o]))}else s=VM(i);r.url=s}return n||(e.images[this.uuid]=r),r}};function VM(t){return typeof HTMLImageElement<"u"&&t instanceof HTMLImageElement||typeof HTMLCanvasElement<"u"&&t instanceof HTMLCanvasElement||typeof ImageBitmap<"u"&&t instanceof ImageBitmap?p0e.getDataURL(t):t.data?{data:Array.from(t.data),width:t.width,height:t.height,type:t.data.constructor.name}:(Hn("Texture: Unable to serialize Texture."),{})}let g0e=0;const GM=new Nt;let Jc=class Jk extends Wg{constructor(e=Jk.DEFAULT_IMAGE,n=Jk.DEFAULT_MAPPING,r=em,i=em,s=Zl,o=Uf,l=Hc,c=$d,d=Jk.DEFAULT_ANISOTROPY,u=Bh){super(),this.isTexture=!0,Object.defineProperty(this,"id",{value:g0e++}),this.uuid=pS(),this.name="",this.source=new bO(e),this.mipmaps=[],this.mapping=n,this.channel=0,this.wrapS=r,this.wrapT=i,this.magFilter=s,this.minFilter=o,this.anisotropy=d,this.format=l,this.internalFormat=null,this.type=c,this.offset=new tr(0,0),this.repeat=new tr(1,1),this.center=new tr(0,0),this.rotation=0,this.matrixAutoUpdate=!0,this.matrix=new ar,this.generateMipmaps=!0,this.premultiplyAlpha=!1,this.flipY=!0,this.unpackAlignment=4,this.colorSpace=u,this.userData={},this.updateRanges=[],this.version=0,this.onUpdate=null,this.renderTarget=null,this.isRenderTargetTexture=!1,this.isArrayTexture=!!(e&&e.depth&&e.depth>1),this.pmremVersion=0}get width(){return this.source.getSize(GM).x}get height(){return this.source.getSize(GM).y}get depth(){return this.source.getSize(GM).z}get image(){return this.source.data}set image(e=null){this.source.data=e}updateMatrix(){this.matrix.setUvTransform(this.offset.x,this.offset.y,this.repeat.x,this.repeat.y,this.rotation,this.center.x,this.center.y)}addUpdateRange(e,n){this.updateRanges.push({start:e,count:n})}clearUpdateRanges(){this.updateRanges.length=0}clone(){return new this.constructor().copy(this)}copy(e){return this.name=e.name,this.source=e.source,this.mipmaps=e.mipmaps.slice(0),this.mapping=e.mapping,this.channel=e.channel,this.wrapS=e.wrapS,this.wrapT=e.wrapT,this.magFilter=e.magFilter,this.minFilter=e.minFilter,this.anisotropy=e.anisotropy,this.format=e.format,this.internalFormat=e.internalFormat,this.type=e.type,this.offset.copy(e.offset),this.repeat.copy(e.repeat),this.center.copy(e.center),this.rotation=e.rotation,this.matrixAutoUpdate=e.matrixAutoUpdate,this.matrix.copy(e.matrix),this.generateMipmaps=e.generateMipmaps,this.premultiplyAlpha=e.premultiplyAlpha,this.flipY=e.flipY,this.unpackAlignment=e.unpackAlignment,this.colorSpace=e.colorSpace,this.renderTarget=e.renderTarget,this.isRenderTargetTexture=e.isRenderTargetTexture,this.isArrayTexture=e.isArrayTexture,this.userData=JSON.parse(JSON.stringify(e.userData)),this.needsUpdate=!0,this}setValues(e){for(const n in e){const r=e[n];if(r===void 0){Hn(`Texture.setValues(): parameter '${n}' has value of undefined.`);continue}const i=this[n];if(i===void 0){Hn(`Texture.setValues(): property '${n}' does not exist.`);continue}i&&r&&i.isVector2&&r.isVector2||i&&r&&i.isVector3&&r.isVector3||i&&r&&i.isMatrix3&&r.isMatrix3?i.copy(r):this[n]=r}}toJSON(e){const n=e===void 0||typeof e=="string";if(!n&&e.textures[this.uuid]!==void 0)return e.textures[this.uuid];const r={metadata:{version:4.7,type:"Texture",generator:"Texture.toJSON"},uuid:this.uuid,name:this.name,image:this.source.toJSON(e).uuid,mapping:this.mapping,channel:this.channel,repeat:[this.repeat.x,this.repeat.y],offset:[this.offset.x,this.offset.y],center:[this.center.x,this.center.y],rotation:this.rotation,wrap:[this.wrapS,this.wrapT],format:this.format,internalFormat:this.internalFormat,type:this.type,colorSpace:this.colorSpace,minFilter:this.minFilter,magFilter:this.magFilter,anisotropy:this.anisotropy,flipY:this.flipY,generateMipmaps:this.generateMipmaps,premultiplyAlpha:this.premultiplyAlpha,unpackAlignment:this.unpackAlignment};return Object.keys(this.userData).length>0&&(r.userData=this.userData),n||(e.textures[this.uuid]=r),r}dispose(){this.dispatchEvent({type:"dispose"})}transformUv(e){if(this.mapping!==EJ)return e;if(e.applyMatrix3(this.matrix),e.x<0||e.x>1)switch(this.wrapS){case qF:e.x=e.x-Math.floor(e.x);break;case em:e.x=e.x<0?0:1;break;case $F:Math.abs(Math.floor(e.x)%2)===1?e.x=Math.ceil(e.x)-e.x:e.x=e.x-Math.floor(e.x);break}if(e.y<0||e.y>1)switch(this.wrapT){case qF:e.y=e.y-Math.floor(e.y);break;case em:e.y=e.y<0?0:1;break;case $F:Math.abs(Math.floor(e.y)%2)===1?e.y=Math.ceil(e.y)-e.y:e.y=e.y-Math.floor(e.y);break}return this.flipY&&(e.y=1-e.y),e}set needsUpdate(e){e===!0&&(this.version++,this.source.needsUpdate=!0)}set needsPMREMUpdate(e){e===!0&&this.pmremVersion++}};Jc.DEFAULT_IMAGE=null;Jc.DEFAULT_MAPPING=EJ;Jc.DEFAULT_ANISOTROPY=1;let bi=class GJ{constructor(e=0,n=0,r=0,i=1){GJ.prototype.isVector4=!0,this.x=e,this.y=n,this.z=r,this.w=i}get width(){return this.z}set width(e){this.z=e}get height(){return this.w}set height(e){this.w=e}set(e,n,r,i){return this.x=e,this.y=n,this.z=r,this.w=i,this}setScalar(e){return this.x=e,this.y=e,this.z=e,this.w=e,this}setX(e){return this.x=e,this}setY(e){return this.y=e,this}setZ(e){return this.z=e,this}setW(e){return this.w=e,this}setComponent(e,n){switch(e){case 0:this.x=n;break;case 1:this.y=n;break;case 2:this.z=n;break;case 3:this.w=n;break;default:throw new Error("index is out of range: "+e)}return this}getComponent(e){switch(e){case 0:return this.x;case 1:return this.y;case 2:return this.z;case 3:return this.w;default:throw new Error("index is out of range: "+e)}}clone(){return new this.constructor(this.x,this.y,this.z,this.w)}copy(e){return this.x=e.x,this.y=e.y,this.z=e.z,this.w=e.w!==void 0?e.w:1,this}add(e){return this.x+=e.x,this.y+=e.y,this.z+=e.z,this.w+=e.w,this}addScalar(e){return this.x+=e,this.y+=e,this.z+=e,this.w+=e,this}addVectors(e,n){return this.x=e.x+n.x,this.y=e.y+n.y,this.z=e.z+n.z,this.w=e.w+n.w,this}addScaledVector(e,n){return this.x+=e.x*n,this.y+=e.y*n,this.z+=e.z*n,this.w+=e.w*n,this}sub(e){return this.x-=e.x,this.y-=e.y,this.z-=e.z,this.w-=e.w,this}subScalar(e){return this.x-=e,this.y-=e,this.z-=e,this.w-=e,this}subVectors(e,n){return this.x=e.x-n.x,this.y=e.y-n.y,this.z=e.z-n.z,this.w=e.w-n.w,this}multiply(e){return this.x*=e.x,this.y*=e.y,this.z*=e.z,this.w*=e.w,this}multiplyScalar(e){return this.x*=e,this.y*=e,this.z*=e,this.w*=e,this}applyMatrix4(e){const n=this.x,r=this.y,i=this.z,s=this.w,o=e.elements;return this.x=o[0]*n+o[4]*r+o[8]*i+o[12]*s,this.y=o[1]*n+o[5]*r+o[9]*i+o[13]*s,this.z=o[2]*n+o[6]*r+o[10]*i+o[14]*s,this.w=o[3]*n+o[7]*r+o[11]*i+o[15]*s,this}divide(e){return this.x/=e.x,this.y/=e.y,this.z/=e.z,this.w/=e.w,this}divideScalar(e){return this.multiplyScalar(1/e)}setAxisAngleFromQuaternion(e){this.w=2*Math.acos(e.w);const n=Math.sqrt(1-e.w*e.w);return n<1e-4?(this.x=1,this.y=0,this.z=0):(this.x=e.x/n,this.y=e.y/n,this.z=e.z/n),this}setAxisAngleFromRotationMatrix(e){let n,r,i,s;const c=e.elements,d=c[0],u=c[4],m=c[8],p=c[1],f=c[5],x=c[9],v=c[2],b=c[6],g=c[10];if(Math.abs(u-p)<.01&&Math.abs(m-v)<.01&&Math.abs(x-b)<.01){if(Math.abs(u+p)<.1&&Math.abs(m+v)<.1&&Math.abs(x+b)<.1&&Math.abs(d+f+g-3)<.1)return this.set(1,0,0,0),this;n=Math.PI;const N=(d+1)/2,P=(f+1)/2,C=(g+1)/2,A=(u+p)/4,T=(m+v)/4,F=(x+b)/4;return N>P&&N>C?N<.01?(r=0,i=.707106781,s=.707106781):(r=Math.sqrt(N),i=A/r,s=T/r):P>C?P<.01?(r=.707106781,i=0,s=.707106781):(i=Math.sqrt(P),r=A/i,s=F/i):C<.01?(r=.707106781,i=.707106781,s=0):(s=Math.sqrt(C),r=T/s,i=F/s),this.set(r,i,s,n),this}let S=Math.sqrt((b-x)*(b-x)+(m-v)*(m-v)+(p-u)*(p-u));return Math.abs(S)<.001&&(S=1),this.x=(b-x)/S,this.y=(m-v)/S,this.z=(p-u)/S,this.w=Math.acos((d+f+g-1)/2),this}setFromMatrixPosition(e){const n=e.elements;return this.x=n[12],this.y=n[13],this.z=n[14],this.w=n[15],this}min(e){return this.x=Math.min(this.x,e.x),this.y=Math.min(this.y,e.y),this.z=Math.min(this.z,e.z),this.w=Math.min(this.w,e.w),this}max(e){return this.x=Math.max(this.x,e.x),this.y=Math.max(this.y,e.y),this.z=Math.max(this.z,e.z),this.w=Math.max(this.w,e.w),this}clamp(e,n){return this.x=fr(this.x,e.x,n.x),this.y=fr(this.y,e.y,n.y),this.z=fr(this.z,e.z,n.z),this.w=fr(this.w,e.w,n.w),this}clampScalar(e,n){return this.x=fr(this.x,e,n),this.y=fr(this.y,e,n),this.z=fr(this.z,e,n),this.w=fr(this.w,e,n),this}clampLength(e,n){const r=this.length();return this.divideScalar(r||1).multiplyScalar(fr(r,e,n))}floor(){return this.x=Math.floor(this.x),this.y=Math.floor(this.y),this.z=Math.floor(this.z),this.w=Math.floor(this.w),this}ceil(){return this.x=Math.ceil(this.x),this.y=Math.ceil(this.y),this.z=Math.ceil(this.z),this.w=Math.ceil(this.w),this}round(){return this.x=Math.round(this.x),this.y=Math.round(this.y),this.z=Math.round(this.z),this.w=Math.round(this.w),this}roundToZero(){return this.x=Math.trunc(this.x),this.y=Math.trunc(this.y),this.z=Math.trunc(this.z),this.w=Math.trunc(this.w),this}negate(){return this.x=-this.x,this.y=-this.y,this.z=-this.z,this.w=-this.w,this}dot(e){return this.x*e.x+this.y*e.y+this.z*e.z+this.w*e.w}lengthSq(){return this.x*this.x+this.y*this.y+this.z*this.z+this.w*this.w}length(){return Math.sqrt(this.x*this.x+this.y*this.y+this.z*this.z+this.w*this.w)}manhattanLength(){return Math.abs(this.x)+Math.abs(this.y)+Math.abs(this.z)+Math.abs(this.w)}normalize(){return this.divideScalar(this.length()||1)}setLength(e){return this.normalize().multiplyScalar(e)}lerp(e,n){return this.x+=(e.x-this.x)*n,this.y+=(e.y-this.y)*n,this.z+=(e.z-this.z)*n,this.w+=(e.w-this.w)*n,this}lerpVectors(e,n,r){return this.x=e.x+(n.x-e.x)*r,this.y=e.y+(n.y-e.y)*r,this.z=e.z+(n.z-e.z)*r,this.w=e.w+(n.w-e.w)*r,this}equals(e){return e.x===this.x&&e.y===this.y&&e.z===this.z&&e.w===this.w}fromArray(e,n=0){return this.x=e[n],this.y=e[n+1],this.z=e[n+2],this.w=e[n+3],this}toArray(e=[],n=0){return e[n]=this.x,e[n+1]=this.y,e[n+2]=this.z,e[n+3]=this.w,e}fromBufferAttribute(e,n){return this.x=e.getX(n),this.y=e.getY(n),this.z=e.getZ(n),this.w=e.getW(n),this}random(){return this.x=Math.random(),this.y=Math.random(),this.z=Math.random(),this.w=Math.random(),this}*[Symbol.iterator](){yield this.x,yield this.y,yield this.z,yield this.w}},b0e=class extends Wg{constructor(e=1,n=1,r={}){super(),r=Object.assign({generateMipmaps:!1,internalFormat:null,minFilter:Zl,depthBuffer:!0,stencilBuffer:!1,resolveDepthBuffer:!0,resolveStencilBuffer:!0,depthTexture:null,samples:0,count:1,depth:1,multiview:!1},r),this.isRenderTarget=!0,this.width=e,this.height=n,this.depth=r.depth,this.scissor=new bi(0,0,e,n),this.scissorTest=!1,this.viewport=new bi(0,0,e,n);const i={width:e,height:n,depth:r.depth},s=new Jc(i);this.textures=[];const o=r.count;for(let l=0;l<o;l++)this.textures[l]=s.clone(),this.textures[l].isRenderTargetTexture=!0,this.textures[l].renderTarget=this;this._setTextureOptions(r),this.depthBuffer=r.depthBuffer,this.stencilBuffer=r.stencilBuffer,this.resolveDepthBuffer=r.resolveDepthBuffer,this.resolveStencilBuffer=r.resolveStencilBuffer,this._depthTexture=null,this.depthTexture=r.depthTexture,this.samples=r.samples,this.multiview=r.multiview}_setTextureOptions(e={}){const n={minFilter:Zl,generateMipmaps:!1,flipY:!1,internalFormat:null};e.mapping!==void 0&&(n.mapping=e.mapping),e.wrapS!==void 0&&(n.wrapS=e.wrapS),e.wrapT!==void 0&&(n.wrapT=e.wrapT),e.wrapR!==void 0&&(n.wrapR=e.wrapR),e.magFilter!==void 0&&(n.magFilter=e.magFilter),e.minFilter!==void 0&&(n.minFilter=e.minFilter),e.format!==void 0&&(n.format=e.format),e.type!==void 0&&(n.type=e.type),e.anisotropy!==void 0&&(n.anisotropy=e.anisotropy),e.colorSpace!==void 0&&(n.colorSpace=e.colorSpace),e.flipY!==void 0&&(n.flipY=e.flipY),e.generateMipmaps!==void 0&&(n.generateMipmaps=e.generateMipmaps),e.internalFormat!==void 0&&(n.internalFormat=e.internalFormat);for(let r=0;r<this.textures.length;r++)this.textures[r].setValues(n)}get texture(){return this.textures[0]}set texture(e){this.textures[0]=e}set depthTexture(e){this._depthTexture!==null&&(this._depthTexture.renderTarget=null),e!==null&&(e.renderTarget=this),this._depthTexture=e}get depthTexture(){return this._depthTexture}setSize(e,n,r=1){if(this.width!==e||this.height!==n||this.depth!==r){this.width=e,this.height=n,this.depth=r;for(let i=0,s=this.textures.length;i<s;i++)this.textures[i].image.width=e,this.textures[i].image.height=n,this.textures[i].image.depth=r,this.textures[i].isData3DTexture!==!0&&(this.textures[i].isArrayTexture=this.textures[i].image.depth>1);this.dispose()}this.viewport.set(0,0,e,n),this.scissor.set(0,0,e,n)}clone(){return new this.constructor().copy(this)}copy(e){this.width=e.width,this.height=e.height,this.depth=e.depth,this.scissor.copy(e.scissor),this.scissorTest=e.scissorTest,this.viewport.copy(e.viewport),this.textures.length=0;for(let n=0,r=e.textures.length;n<r;n++){this.textures[n]=e.textures[n].clone(),this.textures[n].isRenderTargetTexture=!0,this.textures[n].renderTarget=this;const i=Object.assign({},e.textures[n].image);this.textures[n].source=new bO(i)}return this.depthBuffer=e.depthBuffer,this.stencilBuffer=e.stencilBuffer,this.resolveDepthBuffer=e.resolveDepthBuffer,this.resolveStencilBuffer=e.resolveStencilBuffer,e.depthTexture!==null&&(this.depthTexture=e.depthTexture.clone()),this.samples=e.samples,this}dispose(){this.dispatchEvent({type:"dispose"})}},_g=class extends b0e{constructor(e=1,n=1,r={}){super(e,n,r),this.isWebGLRenderTarget=!0}},WJ=class extends Jc{constructor(e=null,n=1,r=1,i=1){super(null),this.isDataArrayTexture=!0,this.image={data:e,width:n,height:r,depth:i},this.magFilter=cl,this.minFilter=cl,this.wrapR=em,this.generateMipmaps=!1,this.flipY=!1,this.unpackAlignment=1,this.layerUpdates=new Set}addLayerUpdate(e){this.layerUpdates.add(e)}clearLayerUpdates(){this.layerUpdates.clear()}},x0e=class extends Jc{constructor(e=null,n=1,r=1,i=1){super(null),this.isData3DTexture=!0,this.image={data:e,width:n,height:r,depth:i},this.magFilter=cl,this.minFilter=cl,this.wrapR=em,this.generateMipmaps=!1,this.flipY=!1,this.unpackAlignment=1}},mp=class{constructor(e=new Nt(1/0,1/0,1/0),n=new Nt(-1/0,-1/0,-1/0)){this.isBox3=!0,this.min=e,this.max=n}set(e,n){return this.min.copy(e),this.max.copy(n),this}setFromArray(e){this.makeEmpty();for(let n=0,r=e.length;n<r;n+=3)this.expandByPoint(Pc.fromArray(e,n));return this}setFromBufferAttribute(e){this.makeEmpty();for(let n=0,r=e.count;n<r;n++)this.expandByPoint(Pc.fromBufferAttribute(e,n));return this}setFromPoints(e){this.makeEmpty();for(let n=0,r=e.length;n<r;n++)this.expandByPoint(e[n]);return this}setFromCenterAndSize(e,n){const r=Pc.copy(n).multiplyScalar(.5);return this.min.copy(e).sub(r),this.max.copy(e).add(r),this}setFromObject(e,n=!1){return this.makeEmpty(),this.expandByObject(e,n)}clone(){return new this.constructor().copy(this)}copy(e){return this.min.copy(e.min),this.max.copy(e.max),this}makeEmpty(){return this.min.x=this.min.y=this.min.z=1/0,this.max.x=this.max.y=this.max.z=-1/0,this}isEmpty(){return this.max.x<this.min.x||this.max.y<this.min.y||this.max.z<this.min.z}getCenter(e){return this.isEmpty()?e.set(0,0,0):e.addVectors(this.min,this.max).multiplyScalar(.5)}getSize(e){return this.isEmpty()?e.set(0,0,0):e.subVectors(this.max,this.min)}expandByPoint(e){return this.min.min(e),this.max.max(e),this}expandByVector(e){return this.min.sub(e),this.max.add(e),this}expandByScalar(e){return this.min.addScalar(-e),this.max.addScalar(e),this}expandByObject(e,n=!1){e.updateWorldMatrix(!1,!1);const r=e.geometry;if(r!==void 0){const s=r.getAttribute("position");if(n===!0&&s!==void 0&&e.isInstancedMesh!==!0)for(let o=0,l=s.count;o<l;o++)e.isMesh===!0?e.getVertexPosition(o,Pc):Pc.fromBufferAttribute(s,o),Pc.applyMatrix4(e.matrixWorld),this.expandByPoint(Pc);else e.boundingBox!==void 0?(e.boundingBox===null&&e.computeBoundingBox(),i1.copy(e.boundingBox)):(r.boundingBox===null&&r.computeBoundingBox(),i1.copy(r.boundingBox)),i1.applyMatrix4(e.matrixWorld),this.union(i1)}const i=e.children;for(let s=0,o=i.length;s<o;s++)this.expandByObject(i[s],n);return this}containsPoint(e){return e.x>=this.min.x&&e.x<=this.max.x&&e.y>=this.min.y&&e.y<=this.max.y&&e.z>=this.min.z&&e.z<=this.max.z}containsBox(e){return this.min.x<=e.min.x&&e.max.x<=this.max.x&&this.min.y<=e.min.y&&e.max.y<=this.max.y&&this.min.z<=e.min.z&&e.max.z<=this.max.z}getParameter(e,n){return n.set((e.x-this.min.x)/(this.max.x-this.min.x),(e.y-this.min.y)/(this.max.y-this.min.y),(e.z-this.min.z)/(this.max.z-this.min.z))}intersectsBox(e){return e.max.x>=this.min.x&&e.min.x<=this.max.x&&e.max.y>=this.min.y&&e.min.y<=this.max.y&&e.max.z>=this.min.z&&e.min.z<=this.max.z}intersectsSphere(e){return this.clampPoint(e.center,Pc),Pc.distanceToSquared(e.center)<=e.radius*e.radius}intersectsPlane(e){let n,r;return e.normal.x>0?(n=e.normal.x*this.min.x,r=e.normal.x*this.max.x):(n=e.normal.x*this.max.x,r=e.normal.x*this.min.x),e.normal.y>0?(n+=e.normal.y*this.min.y,r+=e.normal.y*this.max.y):(n+=e.normal.y*this.max.y,r+=e.normal.y*this.min.y),e.normal.z>0?(n+=e.normal.z*this.min.z,r+=e.normal.z*this.max.z):(n+=e.normal.z*this.max.z,r+=e.normal.z*this.min.z),n<=-e.constant&&r>=-e.constant}intersectsTriangle(e){if(this.isEmpty())return!1;this.getCenter(Iv),s1.subVectors(this.max,Iv),Fb.subVectors(e.a,Iv),Rb.subVectors(e.b,Iv),Lb.subVectors(e.c,Iv),ph.subVectors(Rb,Fb),fh.subVectors(Lb,Rb),hf.subVectors(Fb,Lb);let n=[0,-ph.z,ph.y,0,-fh.z,fh.y,0,-hf.z,hf.y,ph.z,0,-ph.x,fh.z,0,-fh.x,hf.z,0,-hf.x,-ph.y,ph.x,0,-fh.y,fh.x,0,-hf.y,hf.x,0];return!WM(n,Fb,Rb,Lb,s1)||(n=[1,0,0,0,1,0,0,0,1],!WM(n,Fb,Rb,Lb,s1))?!1:(o1.crossVectors(ph,fh),n=[o1.x,o1.y,o1.z],WM(n,Fb,Rb,Lb,s1))}clampPoint(e,n){return n.copy(e).clamp(this.min,this.max)}distanceToPoint(e){return this.clampPoint(e,Pc).distanceTo(e)}getBoundingSphere(e){return this.isEmpty()?e.makeEmpty():(this.getCenter(e.center),e.radius=this.getSize(Pc).length()*.5),e}intersect(e){return this.min.max(e.min),this.max.min(e.max),this.isEmpty()&&this.makeEmpty(),this}union(e){return this.min.min(e.min),this.max.max(e.max),this}applyMatrix4(e){return this.isEmpty()?this:(ku[0].set(this.min.x,this.min.y,this.min.z).applyMatrix4(e),ku[1].set(this.min.x,this.min.y,this.max.z).applyMatrix4(e),ku[2].set(this.min.x,this.max.y,this.min.z).applyMatrix4(e),ku[3].set(this.min.x,this.max.y,this.max.z).applyMatrix4(e),ku[4].set(this.max.x,this.min.y,this.min.z).applyMatrix4(e),ku[5].set(this.max.x,this.min.y,this.max.z).applyMatrix4(e),ku[6].set(this.max.x,this.max.y,this.min.z).applyMatrix4(e),ku[7].set(this.max.x,this.max.y,this.max.z).applyMatrix4(e),this.setFromPoints(ku),this)}translate(e){return this.min.add(e),this.max.add(e),this}equals(e){return e.min.equals(this.min)&&e.max.equals(this.max)}toJSON(){return{min:this.min.toArray(),max:this.max.toArray()}}fromJSON(e){return this.min.fromArray(e.min),this.max.fromArray(e.max),this}};const ku=[new Nt,new Nt,new Nt,new Nt,new Nt,new Nt,new Nt,new Nt],Pc=new Nt,i1=new mp,Fb=new Nt,Rb=new Nt,Lb=new Nt,ph=new Nt,fh=new Nt,hf=new Nt,Iv=new Nt,s1=new Nt,o1=new Nt,pf=new Nt;function WM(t,e,n,r,i){for(let s=0,o=t.length-3;s<=o;s+=3){pf.fromArray(t,s);const l=i.x*Math.abs(pf.x)+i.y*Math.abs(pf.y)+i.z*Math.abs(pf.z),c=e.dot(pf),d=n.dot(pf),u=r.dot(pf);if(Math.max(-Math.max(c,d,u),Math.min(c,d,u))>l)return!1}return!0}const y0e=new mp,Ov=new Nt,KM=new Nt;let iT=class{constructor(e=new Nt,n=-1){this.isSphere=!0,this.center=e,this.radius=n}set(e,n){return this.center.copy(e),this.radius=n,this}setFromPoints(e,n){const r=this.center;n!==void 0?r.copy(n):y0e.setFromPoints(e).getCenter(r);let i=0;for(let s=0,o=e.length;s<o;s++)i=Math.max(i,r.distanceToSquared(e[s]));return this.radius=Math.sqrt(i),this}copy(e){return this.center.copy(e.center),this.radius=e.radius,this}isEmpty(){return this.radius<0}makeEmpty(){return this.center.set(0,0,0),this.radius=-1,this}containsPoint(e){return e.distanceToSquared(this.center)<=this.radius*this.radius}distanceToPoint(e){return e.distanceTo(this.center)-this.radius}intersectsSphere(e){const n=this.radius+e.radius;return e.center.distanceToSquared(this.center)<=n*n}intersectsBox(e){return e.intersectsSphere(this)}intersectsPlane(e){return Math.abs(e.distanceToPoint(this.center))<=this.radius}clampPoint(e,n){const r=this.center.distanceToSquared(e);return n.copy(e),r>this.radius*this.radius&&(n.sub(this.center).normalize(),n.multiplyScalar(this.radius).add(this.center)),n}getBoundingBox(e){return this.isEmpty()?(e.makeEmpty(),e):(e.set(this.center,this.center),e.expandByScalar(this.radius),e)}applyMatrix4(e){return this.center.applyMatrix4(e),this.radius=this.radius*e.getMaxScaleOnAxis(),this}translate(e){return this.center.add(e),this}expandByPoint(e){if(this.isEmpty())return this.center.copy(e),this.radius=0,this;Ov.subVectors(e,this.center);const n=Ov.lengthSq();if(n>this.radius*this.radius){const r=Math.sqrt(n),i=(r-this.radius)*.5;this.center.addScaledVector(Ov,i/r),this.radius+=i}return this}union(e){return e.isEmpty()?this:this.isEmpty()?(this.copy(e),this):(this.center.equals(e.center)===!0?this.radius=Math.max(this.radius,e.radius):(KM.subVectors(e.center,this.center).setLength(e.radius),this.expandByPoint(Ov.copy(e.center).add(KM)),this.expandByPoint(Ov.copy(e.center).sub(KM))),this)}equals(e){return e.center.equals(this.center)&&e.radius===this.radius}clone(){return new this.constructor().copy(this)}toJSON(){return{radius:this.radius,center:this.center.toArray()}}fromJSON(e){return this.radius=e.radius,this.center.fromArray(e.center),this}};const Nu=new Nt,XM=new Nt,l1=new Nt,gh=new Nt,YM=new Nt,c1=new Nt,QM=new Nt;let xO=class{constructor(e=new Nt,n=new Nt(0,0,-1)){this.origin=e,this.direction=n}set(e,n){return this.origin.copy(e),this.direction.copy(n),this}copy(e){return this.origin.copy(e.origin),this.direction.copy(e.direction),this}at(e,n){return n.copy(this.origin).addScaledVector(this.direction,e)}lookAt(e){return this.direction.copy(e).sub(this.origin).normalize(),this}recast(e){return this.origin.copy(this.at(e,Nu)),this}closestPointToPoint(e,n){n.subVectors(e,this.origin);const r=n.dot(this.direction);return r<0?n.copy(this.origin):n.copy(this.origin).addScaledVector(this.direction,r)}distanceToPoint(e){return Math.sqrt(this.distanceSqToPoint(e))}distanceSqToPoint(e){const n=Nu.subVectors(e,this.origin).dot(this.direction);return n<0?this.origin.distanceToSquared(e):(Nu.copy(this.origin).addScaledVector(this.direction,n),Nu.distanceToSquared(e))}distanceSqToSegment(e,n,r,i){XM.copy(e).add(n).multiplyScalar(.5),l1.copy(n).sub(e).normalize(),gh.copy(this.origin).sub(XM);const s=e.distanceTo(n)*.5,o=-this.direction.dot(l1),l=gh.dot(this.direction),c=-gh.dot(l1),d=gh.lengthSq(),u=Math.abs(1-o*o);let m,p,f,x;if(u>0)if(m=o*c-l,p=o*l-c,x=s*u,m>=0)if(p>=-x)if(p<=x){const v=1/u;m*=v,p*=v,f=m*(m+o*p+2*l)+p*(o*m+p+2*c)+d}else p=s,m=Math.max(0,-(o*p+l)),f=-m*m+p*(p+2*c)+d;else p=-s,m=Math.max(0,-(o*p+l)),f=-m*m+p*(p+2*c)+d;else p<=-x?(m=Math.max(0,-(-o*s+l)),p=m>0?-s:Math.min(Math.max(-s,-c),s),f=-m*m+p*(p+2*c)+d):p<=x?(m=0,p=Math.min(Math.max(-s,-c),s),f=p*(p+2*c)+d):(m=Math.max(0,-(o*s+l)),p=m>0?s:Math.min(Math.max(-s,-c),s),f=-m*m+p*(p+2*c)+d);else p=o>0?-s:s,m=Math.max(0,-(o*p+l)),f=-m*m+p*(p+2*c)+d;return r&&r.copy(this.origin).addScaledVector(this.direction,m),i&&i.copy(XM).addScaledVector(l1,p),f}intersectSphere(e,n){Nu.subVectors(e.center,this.origin);const r=Nu.dot(this.direction),i=Nu.dot(Nu)-r*r,s=e.radius*e.radius;if(i>s)return null;const o=Math.sqrt(s-i),l=r-o,c=r+o;return c<0?null:l<0?this.at(c,n):this.at(l,n)}intersectsSphere(e){return e.radius<0?!1:this.distanceSqToPoint(e.center)<=e.radius*e.radius}distanceToPlane(e){const n=e.normal.dot(this.direction);if(n===0)return e.distanceToPoint(this.origin)===0?0:null;const r=-(this.origin.dot(e.normal)+e.constant)/n;return r>=0?r:null}intersectPlane(e,n){const r=this.distanceToPlane(e);return r===null?null:this.at(r,n)}intersectsPlane(e){const n=e.distanceToPoint(this.origin);return n===0||e.normal.dot(this.direction)*n<0}intersectBox(e,n){let r,i,s,o,l,c;const d=1/this.direction.x,u=1/this.direction.y,m=1/this.direction.z,p=this.origin;return d>=0?(r=(e.min.x-p.x)*d,i=(e.max.x-p.x)*d):(r=(e.max.x-p.x)*d,i=(e.min.x-p.x)*d),u>=0?(s=(e.min.y-p.y)*u,o=(e.max.y-p.y)*u):(s=(e.max.y-p.y)*u,o=(e.min.y-p.y)*u),r>o||s>i||((s>r||isNaN(r))&&(r=s),(o<i||isNaN(i))&&(i=o),m>=0?(l=(e.min.z-p.z)*m,c=(e.max.z-p.z)*m):(l=(e.max.z-p.z)*m,c=(e.min.z-p.z)*m),r>c||l>i)||((l>r||r!==r)&&(r=l),(c<i||i!==i)&&(i=c),i<0)?null:this.at(r>=0?r:i,n)}intersectsBox(e){return this.intersectBox(e,Nu)!==null}intersectTriangle(e,n,r,i,s){YM.subVectors(n,e),c1.subVectors(r,e),QM.crossVectors(YM,c1);let o=this.direction.dot(QM),l;if(o>0){if(i)return null;l=1}else if(o<0)l=-1,o=-o;else return null;gh.subVectors(this.origin,e);const c=l*this.direction.dot(c1.crossVectors(gh,c1));if(c<0)return null;const d=l*this.direction.dot(YM.cross(gh));if(d<0||c+d>o)return null;const u=-l*gh.dot(QM);return u<0?null:this.at(u/o,s)}applyMatrix4(e){return this.origin.applyMatrix4(e),this.direction.transformDirection(e),this}equals(e){return e.origin.equals(this.origin)&&e.direction.equals(this.direction)}clone(){return new this.constructor().copy(this)}},wi=class vR{constructor(e,n,r,i,s,o,l,c,d,u,m,p,f,x,v,b){vR.prototype.isMatrix4=!0,this.elements=[1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1],e!==void 0&&this.set(e,n,r,i,s,o,l,c,d,u,m,p,f,x,v,b)}set(e,n,r,i,s,o,l,c,d,u,m,p,f,x,v,b){const g=this.elements;return g[0]=e,g[4]=n,g[8]=r,g[12]=i,g[1]=s,g[5]=o,g[9]=l,g[13]=c,g[2]=d,g[6]=u,g[10]=m,g[14]=p,g[3]=f,g[7]=x,g[11]=v,g[15]=b,this}identity(){return this.set(1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1),this}clone(){return new vR().fromArray(this.elements)}copy(e){const n=this.elements,r=e.elements;return n[0]=r[0],n[1]=r[1],n[2]=r[2],n[3]=r[3],n[4]=r[4],n[5]=r[5],n[6]=r[6],n[7]=r[7],n[8]=r[8],n[9]=r[9],n[10]=r[10],n[11]=r[11],n[12]=r[12],n[13]=r[13],n[14]=r[14],n[15]=r[15],this}copyPosition(e){const n=this.elements,r=e.elements;return n[12]=r[12],n[13]=r[13],n[14]=r[14],this}setFromMatrix3(e){const n=e.elements;return this.set(n[0],n[3],n[6],0,n[1],n[4],n[7],0,n[2],n[5],n[8],0,0,0,0,1),this}extractBasis(e,n,r){return e.setFromMatrixColumn(this,0),n.setFromMatrixColumn(this,1),r.setFromMatrixColumn(this,2),this}makeBasis(e,n,r){return this.set(e.x,n.x,r.x,0,e.y,n.y,r.y,0,e.z,n.z,r.z,0,0,0,0,1),this}extractRotation(e){const n=this.elements,r=e.elements,i=1/Ib.setFromMatrixColumn(e,0).length(),s=1/Ib.setFromMatrixColumn(e,1).length(),o=1/Ib.setFromMatrixColumn(e,2).length();return n[0]=r[0]*i,n[1]=r[1]*i,n[2]=r[2]*i,n[3]=0,n[4]=r[4]*s,n[5]=r[5]*s,n[6]=r[6]*s,n[7]=0,n[8]=r[8]*o,n[9]=r[9]*o,n[10]=r[10]*o,n[11]=0,n[12]=0,n[13]=0,n[14]=0,n[15]=1,this}makeRotationFromEuler(e){const n=this.elements,r=e.x,i=e.y,s=e.z,o=Math.cos(r),l=Math.sin(r),c=Math.cos(i),d=Math.sin(i),u=Math.cos(s),m=Math.sin(s);if(e.order==="XYZ"){const p=o*u,f=o*m,x=l*u,v=l*m;n[0]=c*u,n[4]=-c*m,n[8]=d,n[1]=f+x*d,n[5]=p-v*d,n[9]=-l*c,n[2]=v-p*d,n[6]=x+f*d,n[10]=o*c}else if(e.order==="YXZ"){const p=c*u,f=c*m,x=d*u,v=d*m;n[0]=p+v*l,n[4]=x*l-f,n[8]=o*d,n[1]=o*m,n[5]=o*u,n[9]=-l,n[2]=f*l-x,n[6]=v+p*l,n[10]=o*c}else if(e.order==="ZXY"){const p=c*u,f=c*m,x=d*u,v=d*m;n[0]=p-v*l,n[4]=-o*m,n[8]=x+f*l,n[1]=f+x*l,n[5]=o*u,n[9]=v-p*l,n[2]=-o*d,n[6]=l,n[10]=o*c}else if(e.order==="ZYX"){const p=o*u,f=o*m,x=l*u,v=l*m;n[0]=c*u,n[4]=x*d-f,n[8]=p*d+v,n[1]=c*m,n[5]=v*d+p,n[9]=f*d-x,n[2]=-d,n[6]=l*c,n[10]=o*c}else if(e.order==="YZX"){const p=o*c,f=o*d,x=l*c,v=l*d;n[0]=c*u,n[4]=v-p*m,n[8]=x*m+f,n[1]=m,n[5]=o*u,n[9]=-l*u,n[2]=-d*u,n[6]=f*m+x,n[10]=p-v*m}else if(e.order==="XZY"){const p=o*c,f=o*d,x=l*c,v=l*d;n[0]=c*u,n[4]=-m,n[8]=d*u,n[1]=p*m+v,n[5]=o*u,n[9]=f*m-x,n[2]=x*m-f,n[6]=l*u,n[10]=v*m+p}return n[3]=0,n[7]=0,n[11]=0,n[12]=0,n[13]=0,n[14]=0,n[15]=1,this}makeRotationFromQuaternion(e){return this.compose(v0e,e,w0e)}lookAt(e,n,r){const i=this.elements;return el.subVectors(e,n),el.lengthSq()===0&&(el.z=1),el.normalize(),bh.crossVectors(r,el),bh.lengthSq()===0&&(Math.abs(r.z)===1?el.x+=1e-4:el.z+=1e-4,el.normalize(),bh.crossVectors(r,el)),bh.normalize(),d1.crossVectors(el,bh),i[0]=bh.x,i[4]=d1.x,i[8]=el.x,i[1]=bh.y,i[5]=d1.y,i[9]=el.y,i[2]=bh.z,i[6]=d1.z,i[10]=el.z,this}multiply(e){return this.multiplyMatrices(this,e)}premultiply(e){return this.multiplyMatrices(e,this)}multiplyMatrices(e,n){const r=e.elements,i=n.elements,s=this.elements,o=r[0],l=r[4],c=r[8],d=r[12],u=r[1],m=r[5],p=r[9],f=r[13],x=r[2],v=r[6],b=r[10],g=r[14],S=r[3],N=r[7],P=r[11],C=r[15],A=i[0],T=i[4],F=i[8],k=i[12],E=i[1],$=i[5],z=i[9],X=i[13],R=i[2],ne=i[6],re=i[10],J=i[14],ue=i[3],ie=i[7],se=i[11],K=i[15];return s[0]=o*A+l*E+c*R+d*ue,s[4]=o*T+l*$+c*ne+d*ie,s[8]=o*F+l*z+c*re+d*se,s[12]=o*k+l*X+c*J+d*K,s[1]=u*A+m*E+p*R+f*ue,s[5]=u*T+m*$+p*ne+f*ie,s[9]=u*F+m*z+p*re+f*se,s[13]=u*k+m*X+p*J+f*K,s[2]=x*A+v*E+b*R+g*ue,s[6]=x*T+v*$+b*ne+g*ie,s[10]=x*F+v*z+b*re+g*se,s[14]=x*k+v*X+b*J+g*K,s[3]=S*A+N*E+P*R+C*ue,s[7]=S*T+N*$+P*ne+C*ie,s[11]=S*F+N*z+P*re+C*se,s[15]=S*k+N*X+P*J+C*K,this}multiplyScalar(e){const n=this.elements;return n[0]*=e,n[4]*=e,n[8]*=e,n[12]*=e,n[1]*=e,n[5]*=e,n[9]*=e,n[13]*=e,n[2]*=e,n[6]*=e,n[10]*=e,n[14]*=e,n[3]*=e,n[7]*=e,n[11]*=e,n[15]*=e,this}determinant(){const e=this.elements,n=e[0],r=e[4],i=e[8],s=e[12],o=e[1],l=e[5],c=e[9],d=e[13],u=e[2],m=e[6],p=e[10],f=e[14],x=e[3],v=e[7],b=e[11],g=e[15];return x*(+s*c*m-i*d*m-s*l*p+r*d*p+i*l*f-r*c*f)+v*(+n*c*f-n*d*p+s*o*p-i*o*f+i*d*u-s*c*u)+b*(+n*d*m-n*l*f-s*o*m+r*o*f+s*l*u-r*d*u)+g*(-i*l*u-n*c*m+n*l*p+i*o*m-r*o*p+r*c*u)}transpose(){const e=this.elements;let n;return n=e[1],e[1]=e[4],e[4]=n,n=e[2],e[2]=e[8],e[8]=n,n=e[6],e[6]=e[9],e[9]=n,n=e[3],e[3]=e[12],e[12]=n,n=e[7],e[7]=e[13],e[13]=n,n=e[11],e[11]=e[14],e[14]=n,this}setPosition(e,n,r){const i=this.elements;return e.isVector3?(i[12]=e.x,i[13]=e.y,i[14]=e.z):(i[12]=e,i[13]=n,i[14]=r),this}invert(){const e=this.elements,n=e[0],r=e[1],i=e[2],s=e[3],o=e[4],l=e[5],c=e[6],d=e[7],u=e[8],m=e[9],p=e[10],f=e[11],x=e[12],v=e[13],b=e[14],g=e[15],S=m*b*d-v*p*d+v*c*f-l*b*f-m*c*g+l*p*g,N=x*p*d-u*b*d-x*c*f+o*b*f+u*c*g-o*p*g,P=u*v*d-x*m*d+x*l*f-o*v*f-u*l*g+o*m*g,C=x*m*c-u*v*c-x*l*p+o*v*p+u*l*b-o*m*b,A=n*S+r*N+i*P+s*C;if(A===0)return this.set(0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0);const T=1/A;return e[0]=S*T,e[1]=(v*p*s-m*b*s-v*i*f+r*b*f+m*i*g-r*p*g)*T,e[2]=(l*b*s-v*c*s+v*i*d-r*b*d-l*i*g+r*c*g)*T,e[3]=(m*c*s-l*p*s-m*i*d+r*p*d+l*i*f-r*c*f)*T,e[4]=N*T,e[5]=(u*b*s-x*p*s+x*i*f-n*b*f-u*i*g+n*p*g)*T,e[6]=(x*c*s-o*b*s-x*i*d+n*b*d+o*i*g-n*c*g)*T,e[7]=(o*p*s-u*c*s+u*i*d-n*p*d-o*i*f+n*c*f)*T,e[8]=P*T,e[9]=(x*m*s-u*v*s-x*r*f+n*v*f+u*r*g-n*m*g)*T,e[10]=(o*v*s-x*l*s+x*r*d-n*v*d-o*r*g+n*l*g)*T,e[11]=(u*l*s-o*m*s-u*r*d+n*m*d+o*r*f-n*l*f)*T,e[12]=C*T,e[13]=(u*v*i-x*m*i+x*r*p-n*v*p-u*r*b+n*m*b)*T,e[14]=(x*l*i-o*v*i-x*r*c+n*v*c+o*r*b-n*l*b)*T,e[15]=(o*m*i-u*l*i+u*r*c-n*m*c-o*r*p+n*l*p)*T,this}scale(e){const n=this.elements,r=e.x,i=e.y,s=e.z;return n[0]*=r,n[4]*=i,n[8]*=s,n[1]*=r,n[5]*=i,n[9]*=s,n[2]*=r,n[6]*=i,n[10]*=s,n[3]*=r,n[7]*=i,n[11]*=s,this}getMaxScaleOnAxis(){const e=this.elements,n=e[0]*e[0]+e[1]*e[1]+e[2]*e[2],r=e[4]*e[4]+e[5]*e[5]+e[6]*e[6],i=e[8]*e[8]+e[9]*e[9]+e[10]*e[10];return Math.sqrt(Math.max(n,r,i))}makeTranslation(e,n,r){return e.isVector3?this.set(1,0,0,e.x,0,1,0,e.y,0,0,1,e.z,0,0,0,1):this.set(1,0,0,e,0,1,0,n,0,0,1,r,0,0,0,1),this}makeRotationX(e){const n=Math.cos(e),r=Math.sin(e);return this.set(1,0,0,0,0,n,-r,0,0,r,n,0,0,0,0,1),this}makeRotationY(e){const n=Math.cos(e),r=Math.sin(e);return this.set(n,0,r,0,0,1,0,0,-r,0,n,0,0,0,0,1),this}makeRotationZ(e){const n=Math.cos(e),r=Math.sin(e);return this.set(n,-r,0,0,r,n,0,0,0,0,1,0,0,0,0,1),this}makeRotationAxis(e,n){const r=Math.cos(n),i=Math.sin(n),s=1-r,o=e.x,l=e.y,c=e.z,d=s*o,u=s*l;return this.set(d*o+r,d*l-i*c,d*c+i*l,0,d*l+i*c,u*l+r,u*c-i*o,0,d*c-i*l,u*c+i*o,s*c*c+r,0,0,0,0,1),this}makeScale(e,n,r){return this.set(e,0,0,0,0,n,0,0,0,0,r,0,0,0,0,1),this}makeShear(e,n,r,i,s,o){return this.set(1,r,s,0,e,1,o,0,n,i,1,0,0,0,0,1),this}compose(e,n,r){const i=this.elements,s=n._x,o=n._y,l=n._z,c=n._w,d=s+s,u=o+o,m=l+l,p=s*d,f=s*u,x=s*m,v=o*u,b=o*m,g=l*m,S=c*d,N=c*u,P=c*m,C=r.x,A=r.y,T=r.z;return i[0]=(1-(v+g))*C,i[1]=(f+P)*C,i[2]=(x-N)*C,i[3]=0,i[4]=(f-P)*A,i[5]=(1-(p+g))*A,i[6]=(b+S)*A,i[7]=0,i[8]=(x+N)*T,i[9]=(b-S)*T,i[10]=(1-(p+v))*T,i[11]=0,i[12]=e.x,i[13]=e.y,i[14]=e.z,i[15]=1,this}decompose(e,n,r){const i=this.elements;let s=Ib.set(i[0],i[1],i[2]).length();const o=Ib.set(i[4],i[5],i[6]).length(),l=Ib.set(i[8],i[9],i[10]).length();this.determinant()<0&&(s=-s),e.x=i[12],e.y=i[13],e.z=i[14],Tc.copy(this);const d=1/s,u=1/o,m=1/l;return Tc.elements[0]*=d,Tc.elements[1]*=d,Tc.elements[2]*=d,Tc.elements[4]*=u,Tc.elements[5]*=u,Tc.elements[6]*=u,Tc.elements[8]*=m,Tc.elements[9]*=m,Tc.elements[10]*=m,n.setFromRotationMatrix(Tc),r.x=s,r.y=o,r.z=l,this}makePerspective(e,n,r,i,s,o,l=Ed,c=!1){const d=this.elements,u=2*s/(n-e),m=2*s/(r-i),p=(n+e)/(n-e),f=(r+i)/(r-i);let x,v;if(c)x=s/(o-s),v=o*s/(o-s);else if(l===Ed)x=-(o+s)/(o-s),v=-2*o*s/(o-s);else if(l===ON)x=-o/(o-s),v=-o*s/(o-s);else throw new Error("THREE.Matrix4.makePerspective(): Invalid coordinate system: "+l);return d[0]=u,d[4]=0,d[8]=p,d[12]=0,d[1]=0,d[5]=m,d[9]=f,d[13]=0,d[2]=0,d[6]=0,d[10]=x,d[14]=v,d[3]=0,d[7]=0,d[11]=-1,d[15]=0,this}makeOrthographic(e,n,r,i,s,o,l=Ed,c=!1){const d=this.elements,u=2/(n-e),m=2/(r-i),p=-(n+e)/(n-e),f=-(r+i)/(r-i);let x,v;if(c)x=1/(o-s),v=o/(o-s);else if(l===Ed)x=-2/(o-s),v=-(o+s)/(o-s);else if(l===ON)x=-1/(o-s),v=-s/(o-s);else throw new Error("THREE.Matrix4.makeOrthographic(): Invalid coordinate system: "+l);return d[0]=u,d[4]=0,d[8]=0,d[12]=p,d[1]=0,d[5]=m,d[9]=0,d[13]=f,d[2]=0,d[6]=0,d[10]=x,d[14]=v,d[3]=0,d[7]=0,d[11]=0,d[15]=1,this}equals(e){const n=this.elements,r=e.elements;for(let i=0;i<16;i++)if(n[i]!==r[i])return!1;return!0}fromArray(e,n=0){for(let r=0;r<16;r++)this.elements[r]=e[r+n];return this}toArray(e=[],n=0){const r=this.elements;return e[n]=r[0],e[n+1]=r[1],e[n+2]=r[2],e[n+3]=r[3],e[n+4]=r[4],e[n+5]=r[5],e[n+6]=r[6],e[n+7]=r[7],e[n+8]=r[8],e[n+9]=r[9],e[n+10]=r[10],e[n+11]=r[11],e[n+12]=r[12],e[n+13]=r[13],e[n+14]=r[14],e[n+15]=r[15],e}};const Ib=new Nt,Tc=new wi,v0e=new Nt(0,0,0),w0e=new Nt(1,1,1),bh=new Nt,d1=new Nt,el=new Nt,x6=new wi,y6=new Sg;let kp=class KJ{constructor(e=0,n=0,r=0,i=KJ.DEFAULT_ORDER){this.isEuler=!0,this._x=e,this._y=n,this._z=r,this._order=i}get x(){return this._x}set x(e){this._x=e,this._onChangeCallback()}get y(){return this._y}set y(e){this._y=e,this._onChangeCallback()}get z(){return this._z}set z(e){this._z=e,this._onChangeCallback()}get order(){return this._order}set order(e){this._order=e,this._onChangeCallback()}set(e,n,r,i=this._order){return this._x=e,this._y=n,this._z=r,this._order=i,this._onChangeCallback(),this}clone(){return new this.constructor(this._x,this._y,this._z,this._order)}copy(e){return this._x=e._x,this._y=e._y,this._z=e._z,this._order=e._order,this._onChangeCallback(),this}setFromRotationMatrix(e,n=this._order,r=!0){const i=e.elements,s=i[0],o=i[4],l=i[8],c=i[1],d=i[5],u=i[9],m=i[2],p=i[6],f=i[10];switch(n){case"XYZ":this._y=Math.asin(fr(l,-1,1)),Math.abs(l)<.9999999?(this._x=Math.atan2(-u,f),this._z=Math.atan2(-o,s)):(this._x=Math.atan2(p,d),this._z=0);break;case"YXZ":this._x=Math.asin(-fr(u,-1,1)),Math.abs(u)<.9999999?(this._y=Math.atan2(l,f),this._z=Math.atan2(c,d)):(this._y=Math.atan2(-m,s),this._z=0);break;case"ZXY":this._x=Math.asin(fr(p,-1,1)),Math.abs(p)<.9999999?(this._y=Math.atan2(-m,f),this._z=Math.atan2(-o,d)):(this._y=0,this._z=Math.atan2(c,s));break;case"ZYX":this._y=Math.asin(-fr(m,-1,1)),Math.abs(m)<.9999999?(this._x=Math.atan2(p,f),this._z=Math.atan2(c,s)):(this._x=0,this._z=Math.atan2(-o,d));break;case"YZX":this._z=Math.asin(fr(c,-1,1)),Math.abs(c)<.9999999?(this._x=Math.atan2(-u,d),this._y=Math.atan2(-m,s)):(this._x=0,this._y=Math.atan2(l,f));break;case"XZY":this._z=Math.asin(-fr(o,-1,1)),Math.abs(o)<.9999999?(this._x=Math.atan2(p,d),this._y=Math.atan2(l,s)):(this._x=Math.atan2(-u,f),this._y=0);break;default:Hn("Euler: .setFromRotationMatrix() encountered an unknown order: "+n)}return this._order=n,r===!0&&this._onChangeCallback(),this}setFromQuaternion(e,n,r){return x6.makeRotationFromQuaternion(e),this.setFromRotationMatrix(x6,n,r)}setFromVector3(e,n=this._order){return this.set(e.x,e.y,e.z,n)}reorder(e){return y6.setFromEuler(this),this.setFromQuaternion(y6,e)}equals(e){return e._x===this._x&&e._y===this._y&&e._z===this._z&&e._order===this._order}fromArray(e){return this._x=e[0],this._y=e[1],this._z=e[2],e[3]!==void 0&&(this._order=e[3]),this._onChangeCallback(),this}toArray(e=[],n=0){return e[n]=this._x,e[n+1]=this._y,e[n+2]=this._z,e[n+3]=this._order,e}_onChange(e){return this._onChangeCallback=e,this}_onChangeCallback(){}*[Symbol.iterator](){yield this._x,yield this._y,yield this._z,yield this._order}};kp.DEFAULT_ORDER="XYZ";let XJ=class{constructor(){this.mask=1}set(e){this.mask=(1<<e|0)>>>0}enable(e){this.mask|=1<<e|0}enableAll(){this.mask=-1}toggle(e){this.mask^=1<<e|0}disable(e){this.mask&=~(1<<e|0)}disableAll(){this.mask=0}test(e){return(this.mask&e.mask)!==0}isEnabled(e){return(this.mask&(1<<e|0))!==0}},S0e=0;const v6=new Nt,Ob=new Sg,Cu=new wi,u1=new Nt,zv=new Nt,_0e=new Nt,k0e=new Sg,w6=new Nt(1,0,0),S6=new Nt(0,1,0),_6=new Nt(0,0,1),k6={type:"added"},N0e={type:"removed"},zb={type:"childadded",child:null},JM={type:"childremoved",child:null};let gl=class Zk extends Wg{constructor(){super(),this.isObject3D=!0,Object.defineProperty(this,"id",{value:S0e++}),this.uuid=pS(),this.name="",this.type="Object3D",this.parent=null,this.children=[],this.up=Zk.DEFAULT_UP.clone();const e=new Nt,n=new kp,r=new Sg,i=new Nt(1,1,1);function s(){r.setFromEuler(n,!1)}function o(){n.setFromQuaternion(r,void 0,!1)}n._onChange(s),r._onChange(o),Object.defineProperties(this,{position:{configurable:!0,enumerable:!0,value:e},rotation:{configurable:!0,enumerable:!0,value:n},quaternion:{configurable:!0,enumerable:!0,value:r},scale:{configurable:!0,enumerable:!0,value:i},modelViewMatrix:{value:new wi},normalMatrix:{value:new ar}}),this.matrix=new wi,this.matrixWorld=new wi,this.matrixAutoUpdate=Zk.DEFAULT_MATRIX_AUTO_UPDATE,this.matrixWorldAutoUpdate=Zk.DEFAULT_MATRIX_WORLD_AUTO_UPDATE,this.matrixWorldNeedsUpdate=!1,this.layers=new XJ,this.visible=!0,this.castShadow=!1,this.receiveShadow=!1,this.frustumCulled=!0,this.renderOrder=0,this.animations=[],this.customDepthMaterial=void 0,this.customDistanceMaterial=void 0,this.userData={}}onBeforeShadow(){}onAfterShadow(){}onBeforeRender(){}onAfterRender(){}applyMatrix4(e){this.matrixAutoUpdate&&this.updateMatrix(),this.matrix.premultiply(e),this.matrix.decompose(this.position,this.quaternion,this.scale)}applyQuaternion(e){return this.quaternion.premultiply(e),this}setRotationFromAxisAngle(e,n){this.quaternion.setFromAxisAngle(e,n)}setRotationFromEuler(e){this.quaternion.setFromEuler(e,!0)}setRotationFromMatrix(e){this.quaternion.setFromRotationMatrix(e)}setRotationFromQuaternion(e){this.quaternion.copy(e)}rotateOnAxis(e,n){return Ob.setFromAxisAngle(e,n),this.quaternion.multiply(Ob),this}rotateOnWorldAxis(e,n){return Ob.setFromAxisAngle(e,n),this.quaternion.premultiply(Ob),this}rotateX(e){return this.rotateOnAxis(w6,e)}rotateY(e){return this.rotateOnAxis(S6,e)}rotateZ(e){return this.rotateOnAxis(_6,e)}translateOnAxis(e,n){return v6.copy(e).applyQuaternion(this.quaternion),this.position.add(v6.multiplyScalar(n)),this}translateX(e){return this.translateOnAxis(w6,e)}translateY(e){return this.translateOnAxis(S6,e)}translateZ(e){return this.translateOnAxis(_6,e)}localToWorld(e){return this.updateWorldMatrix(!0,!1),e.applyMatrix4(this.matrixWorld)}worldToLocal(e){return this.updateWorldMatrix(!0,!1),e.applyMatrix4(Cu.copy(this.matrixWorld).invert())}lookAt(e,n,r){e.isVector3?u1.copy(e):u1.set(e,n,r);const i=this.parent;this.updateWorldMatrix(!0,!1),zv.setFromMatrixPosition(this.matrixWorld),this.isCamera||this.isLight?Cu.lookAt(zv,u1,this.up):Cu.lookAt(u1,zv,this.up),this.quaternion.setFromRotationMatrix(Cu),i&&(Cu.extractRotation(i.matrixWorld),Ob.setFromRotationMatrix(Cu),this.quaternion.premultiply(Ob.invert()))}add(e){if(arguments.length>1){for(let n=0;n<arguments.length;n++)this.add(arguments[n]);return this}return e===this?(si("Object3D.add: object can't be added as a child of itself.",e),this):(e&&e.isObject3D?(e.removeFromParent(),e.parent=this,this.children.push(e),e.dispatchEvent(k6),zb.child=e,this.dispatchEvent(zb),zb.child=null):si("Object3D.add: object not an instance of THREE.Object3D.",e),this)}remove(e){if(arguments.length>1){for(let r=0;r<arguments.length;r++)this.remove(arguments[r]);return this}const n=this.children.indexOf(e);return n!==-1&&(e.parent=null,this.children.splice(n,1),e.dispatchEvent(N0e),JM.child=e,this.dispatchEvent(JM),JM.child=null),this}removeFromParent(){const e=this.parent;return e!==null&&e.remove(this),this}clear(){return this.remove(...this.children)}attach(e){return this.updateWorldMatrix(!0,!1),Cu.copy(this.matrixWorld).invert(),e.parent!==null&&(e.parent.updateWorldMatrix(!0,!1),Cu.multiply(e.parent.matrixWorld)),e.applyMatrix4(Cu),e.removeFromParent(),e.parent=this,this.children.push(e),e.updateWorldMatrix(!1,!0),e.dispatchEvent(k6),zb.child=e,this.dispatchEvent(zb),zb.child=null,this}getObjectById(e){return this.getObjectByProperty("id",e)}getObjectByName(e){return this.getObjectByProperty("name",e)}getObjectByProperty(e,n){if(this[e]===n)return this;for(let r=0,i=this.children.length;r<i;r++){const o=this.children[r].getObjectByProperty(e,n);if(o!==void 0)return o}}getObjectsByProperty(e,n,r=[]){this[e]===n&&r.push(this);const i=this.children;for(let s=0,o=i.length;s<o;s++)i[s].getObjectsByProperty(e,n,r);return r}getWorldPosition(e){return this.updateWorldMatrix(!0,!1),e.setFromMatrixPosition(this.matrixWorld)}getWorldQuaternion(e){return this.updateWorldMatrix(!0,!1),this.matrixWorld.decompose(zv,e,_0e),e}getWorldScale(e){return this.updateWorldMatrix(!0,!1),this.matrixWorld.decompose(zv,k0e,e),e}getWorldDirection(e){this.updateWorldMatrix(!0,!1);const n=this.matrixWorld.elements;return e.set(n[8],n[9],n[10]).normalize()}raycast(){}traverse(e){e(this);const n=this.children;for(let r=0,i=n.length;r<i;r++)n[r].traverse(e)}traverseVisible(e){if(this.visible===!1)return;e(this);const n=this.children;for(let r=0,i=n.length;r<i;r++)n[r].traverseVisible(e)}traverseAncestors(e){const n=this.parent;n!==null&&(e(n),n.traverseAncestors(e))}updateMatrix(){this.matrix.compose(this.position,this.quaternion,this.scale),this.matrixWorldNeedsUpdate=!0}updateMatrixWorld(e){this.matrixAutoUpdate&&this.updateMatrix(),(this.matrixWorldNeedsUpdate||e)&&(this.matrixWorldAutoUpdate===!0&&(this.parent===null?this.matrixWorld.copy(this.matrix):this.matrixWorld.multiplyMatrices(this.parent.matrixWorld,this.matrix)),this.matrixWorldNeedsUpdate=!1,e=!0);const n=this.children;for(let r=0,i=n.length;r<i;r++)n[r].updateMatrixWorld(e)}updateWorldMatrix(e,n){const r=this.parent;if(e===!0&&r!==null&&r.updateWorldMatrix(!0,!1),this.matrixAutoUpdate&&this.updateMatrix(),this.matrixWorldAutoUpdate===!0&&(this.parent===null?this.matrixWorld.copy(this.matrix):this.matrixWorld.multiplyMatrices(this.parent.matrixWorld,this.matrix)),n===!0){const i=this.children;for(let s=0,o=i.length;s<o;s++)i[s].updateWorldMatrix(!1,!0)}}toJSON(e){const n=e===void 0||typeof e=="string",r={};n&&(e={geometries:{},materials:{},textures:{},images:{},shapes:{},skeletons:{},animations:{},nodes:{}},r.metadata={version:4.7,type:"Object",generator:"Object3D.toJSON"});const i={};i.uuid=this.uuid,i.type=this.type,this.name!==""&&(i.name=this.name),this.castShadow===!0&&(i.castShadow=!0),this.receiveShadow===!0&&(i.receiveShadow=!0),this.visible===!1&&(i.visible=!1),this.frustumCulled===!1&&(i.frustumCulled=!1),this.renderOrder!==0&&(i.renderOrder=this.renderOrder),Object.keys(this.userData).length>0&&(i.userData=this.userData),i.layers=this.layers.mask,i.matrix=this.matrix.toArray(),i.up=this.up.toArray(),this.matrixAutoUpdate===!1&&(i.matrixAutoUpdate=!1),this.isInstancedMesh&&(i.type="InstancedMesh",i.count=this.count,i.instanceMatrix=this.instanceMatrix.toJSON(),this.instanceColor!==null&&(i.instanceColor=this.instanceColor.toJSON())),this.isBatchedMesh&&(i.type="BatchedMesh",i.perObjectFrustumCulled=this.perObjectFrustumCulled,i.sortObjects=this.sortObjects,i.drawRanges=this._drawRanges,i.reservedRanges=this._reservedRanges,i.geometryInfo=this._geometryInfo.map(l=>({...l,boundingBox:l.boundingBox?l.boundingBox.toJSON():void 0,boundingSphere:l.boundingSphere?l.boundingSphere.toJSON():void 0})),i.instanceInfo=this._instanceInfo.map(l=>({...l})),i.availableInstanceIds=this._availableInstanceIds.slice(),i.availableGeometryIds=this._availableGeometryIds.slice(),i.nextIndexStart=this._nextIndexStart,i.nextVertexStart=this._nextVertexStart,i.geometryCount=this._geometryCount,i.maxInstanceCount=this._maxInstanceCount,i.maxVertexCount=this._maxVertexCount,i.maxIndexCount=this._maxIndexCount,i.geometryInitialized=this._geometryInitialized,i.matricesTexture=this._matricesTexture.toJSON(e),i.indirectTexture=this._indirectTexture.toJSON(e),this._colorsTexture!==null&&(i.colorsTexture=this._colorsTexture.toJSON(e)),this.boundingSphere!==null&&(i.boundingSphere=this.boundingSphere.toJSON()),this.boundingBox!==null&&(i.boundingBox=this.boundingBox.toJSON()));function s(l,c){return l[c.uuid]===void 0&&(l[c.uuid]=c.toJSON(e)),c.uuid}if(this.isScene)this.background&&(this.background.isColor?i.background=this.background.toJSON():this.background.isTexture&&(i.background=this.background.toJSON(e).uuid)),this.environment&&this.environment.isTexture&&this.environment.isRenderTargetTexture!==!0&&(i.environment=this.environment.toJSON(e).uuid);else if(this.isMesh||this.isLine||this.isPoints){i.geometry=s(e.geometries,this.geometry);const l=this.geometry.parameters;if(l!==void 0&&l.shapes!==void 0){const c=l.shapes;if(Array.isArray(c))for(let d=0,u=c.length;d<u;d++){const m=c[d];s(e.shapes,m)}else s(e.shapes,c)}}if(this.isSkinnedMesh&&(i.bindMode=this.bindMode,i.bindMatrix=this.bindMatrix.toArray(),this.skeleton!==void 0&&(s(e.skeletons,this.skeleton),i.skeleton=this.skeleton.uuid)),this.material!==void 0)if(Array.isArray(this.material)){const l=[];for(let c=0,d=this.material.length;c<d;c++)l.push(s(e.materials,this.material[c]));i.material=l}else i.material=s(e.materials,this.material);if(this.children.length>0){i.children=[];for(let l=0;l<this.children.length;l++)i.children.push(this.children[l].toJSON(e).object)}if(this.animations.length>0){i.animations=[];for(let l=0;l<this.animations.length;l++){const c=this.animations[l];i.animations.push(s(e.animations,c))}}if(n){const l=o(e.geometries),c=o(e.materials),d=o(e.textures),u=o(e.images),m=o(e.shapes),p=o(e.skeletons),f=o(e.animations),x=o(e.nodes);l.length>0&&(r.geometries=l),c.length>0&&(r.materials=c),d.length>0&&(r.textures=d),u.length>0&&(r.images=u),m.length>0&&(r.shapes=m),p.length>0&&(r.skeletons=p),f.length>0&&(r.animations=f),x.length>0&&(r.nodes=x)}return r.object=i,r;function o(l){const c=[];for(const d in l){const u=l[d];delete u.metadata,c.push(u)}return c}}clone(e){return new this.constructor().copy(this,e)}copy(e,n=!0){if(this.name=e.name,this.up.copy(e.up),this.position.copy(e.position),this.rotation.order=e.rotation.order,this.quaternion.copy(e.quaternion),this.scale.copy(e.scale),this.matrix.copy(e.matrix),this.matrixWorld.copy(e.matrixWorld),this.matrixAutoUpdate=e.matrixAutoUpdate,this.matrixWorldAutoUpdate=e.matrixWorldAutoUpdate,this.matrixWorldNeedsUpdate=e.matrixWorldNeedsUpdate,this.layers.mask=e.layers.mask,this.visible=e.visible,this.castShadow=e.castShadow,this.receiveShadow=e.receiveShadow,this.frustumCulled=e.frustumCulled,this.renderOrder=e.renderOrder,this.animations=e.animations.slice(),this.userData=JSON.parse(JSON.stringify(e.userData)),n===!0)for(let r=0;r<e.children.length;r++){const i=e.children[r];this.add(i.clone())}return this}};gl.DEFAULT_UP=new Nt(0,1,0);gl.DEFAULT_MATRIX_AUTO_UPDATE=!0;gl.DEFAULT_MATRIX_WORLD_AUTO_UPDATE=!0;const Ac=new Nt,Pu=new Nt,ZM=new Nt,Tu=new Nt,Ub=new Nt,Bb=new Nt,N6=new Nt,eE=new Nt,tE=new Nt,nE=new Nt,rE=new bi,aE=new bi,iE=new bi;let Uv=class wx{constructor(e=new Nt,n=new Nt,r=new Nt){this.a=e,this.b=n,this.c=r}static getNormal(e,n,r,i){i.subVectors(r,n),Ac.subVectors(e,n),i.cross(Ac);const s=i.lengthSq();return s>0?i.multiplyScalar(1/Math.sqrt(s)):i.set(0,0,0)}static getBarycoord(e,n,r,i,s){Ac.subVectors(i,n),Pu.subVectors(r,n),ZM.subVectors(e,n);const o=Ac.dot(Ac),l=Ac.dot(Pu),c=Ac.dot(ZM),d=Pu.dot(Pu),u=Pu.dot(ZM),m=o*d-l*l;if(m===0)return s.set(0,0,0),null;const p=1/m,f=(d*c-l*u)*p,x=(o*u-l*c)*p;return s.set(1-f-x,x,f)}static containsPoint(e,n,r,i){return this.getBarycoord(e,n,r,i,Tu)===null?!1:Tu.x>=0&&Tu.y>=0&&Tu.x+Tu.y<=1}static getInterpolation(e,n,r,i,s,o,l,c){return this.getBarycoord(e,n,r,i,Tu)===null?(c.x=0,c.y=0,"z"in c&&(c.z=0),"w"in c&&(c.w=0),null):(c.setScalar(0),c.addScaledVector(s,Tu.x),c.addScaledVector(o,Tu.y),c.addScaledVector(l,Tu.z),c)}static getInterpolatedAttribute(e,n,r,i,s,o){return rE.setScalar(0),aE.setScalar(0),iE.setScalar(0),rE.fromBufferAttribute(e,n),aE.fromBufferAttribute(e,r),iE.fromBufferAttribute(e,i),o.setScalar(0),o.addScaledVector(rE,s.x),o.addScaledVector(aE,s.y),o.addScaledVector(iE,s.z),o}static isFrontFacing(e,n,r,i){return Ac.subVectors(r,n),Pu.subVectors(e,n),Ac.cross(Pu).dot(i)<0}set(e,n,r){return this.a.copy(e),this.b.copy(n),this.c.copy(r),this}setFromPointsAndIndices(e,n,r,i){return this.a.copy(e[n]),this.b.copy(e[r]),this.c.copy(e[i]),this}setFromAttributeAndIndices(e,n,r,i){return this.a.fromBufferAttribute(e,n),this.b.fromBufferAttribute(e,r),this.c.fromBufferAttribute(e,i),this}clone(){return new this.constructor().copy(this)}copy(e){return this.a.copy(e.a),this.b.copy(e.b),this.c.copy(e.c),this}getArea(){return Ac.subVectors(this.c,this.b),Pu.subVectors(this.a,this.b),Ac.cross(Pu).length()*.5}getMidpoint(e){return e.addVectors(this.a,this.b).add(this.c).multiplyScalar(1/3)}getNormal(e){return wx.getNormal(this.a,this.b,this.c,e)}getPlane(e){return e.setFromCoplanarPoints(this.a,this.b,this.c)}getBarycoord(e,n){return wx.getBarycoord(e,this.a,this.b,this.c,n)}getInterpolation(e,n,r,i,s){return wx.getInterpolation(e,this.a,this.b,this.c,n,r,i,s)}containsPoint(e){return wx.containsPoint(e,this.a,this.b,this.c)}isFrontFacing(e){return wx.isFrontFacing(this.a,this.b,this.c,e)}intersectsBox(e){return e.intersectsTriangle(this)}closestPointToPoint(e,n){const r=this.a,i=this.b,s=this.c;let o,l;Ub.subVectors(i,r),Bb.subVectors(s,r),eE.subVectors(e,r);const c=Ub.dot(eE),d=Bb.dot(eE);if(c<=0&&d<=0)return n.copy(r);tE.subVectors(e,i);const u=Ub.dot(tE),m=Bb.dot(tE);if(u>=0&&m<=u)return n.copy(i);const p=c*m-u*d;if(p<=0&&c>=0&&u<=0)return o=c/(c-u),n.copy(r).addScaledVector(Ub,o);nE.subVectors(e,s);const f=Ub.dot(nE),x=Bb.dot(nE);if(x>=0&&f<=x)return n.copy(s);const v=f*d-c*x;if(v<=0&&d>=0&&x<=0)return l=d/(d-x),n.copy(r).addScaledVector(Bb,l);const b=u*x-f*m;if(b<=0&&m-u>=0&&f-x>=0)return N6.subVectors(s,i),l=(m-u)/(m-u+(f-x)),n.copy(i).addScaledVector(N6,l);const g=1/(b+v+p);return o=v*g,l=p*g,n.copy(r).addScaledVector(Ub,o).addScaledVector(Bb,l)}equals(e){return e.a.equals(this.a)&&e.b.equals(this.b)&&e.c.equals(this.c)}};const YJ={aliceblue:15792383,antiquewhite:16444375,aqua:65535,aquamarine:8388564,azure:15794175,beige:16119260,bisque:16770244,black:0,blanchedalmond:16772045,blue:255,blueviolet:9055202,brown:10824234,burlywood:14596231,cadetblue:6266528,chartreuse:8388352,chocolate:13789470,coral:16744272,cornflowerblue:6591981,cornsilk:16775388,crimson:14423100,cyan:65535,darkblue:139,darkcyan:35723,darkgoldenrod:12092939,darkgray:11119017,darkgreen:25600,darkgrey:11119017,darkkhaki:12433259,darkmagenta:9109643,darkolivegreen:5597999,darkorange:16747520,darkorchid:10040012,darkred:9109504,darksalmon:15308410,darkseagreen:9419919,darkslateblue:4734347,darkslategray:3100495,darkslategrey:3100495,darkturquoise:52945,darkviolet:9699539,deeppink:16716947,deepskyblue:49151,dimgray:6908265,dimgrey:6908265,dodgerblue:2003199,firebrick:11674146,floralwhite:16775920,forestgreen:2263842,fuchsia:16711935,gainsboro:14474460,ghostwhite:16316671,gold:16766720,goldenrod:14329120,gray:8421504,green:32768,greenyellow:11403055,grey:8421504,honeydew:15794160,hotpink:16738740,indianred:13458524,indigo:4915330,ivory:16777200,khaki:15787660,lavender:15132410,lavenderblush:16773365,lawngreen:8190976,lemonchiffon:16775885,lightblue:11393254,lightcoral:15761536,lightcyan:14745599,lightgoldenrodyellow:16448210,lightgray:13882323,lightgreen:9498256,lightgrey:13882323,lightpink:16758465,lightsalmon:16752762,lightseagreen:2142890,lightskyblue:8900346,lightslategray:7833753,lightslategrey:7833753,lightsteelblue:11584734,lightyellow:16777184,lime:65280,limegreen:3329330,linen:16445670,magenta:16711935,maroon:8388608,mediumaquamarine:6737322,mediumblue:205,mediumorchid:12211667,mediumpurple:9662683,mediumseagreen:3978097,mediumslateblue:8087790,mediumspringgreen:64154,mediumturquoise:4772300,mediumvioletred:13047173,midnightblue:1644912,mintcream:16121850,mistyrose:16770273,moccasin:16770229,navajowhite:16768685,navy:128,oldlace:16643558,olive:8421376,olivedrab:7048739,orange:16753920,orangered:16729344,orchid:14315734,palegoldenrod:15657130,palegreen:10025880,paleturquoise:11529966,palevioletred:14381203,papayawhip:16773077,peachpuff:16767673,peru:13468991,pink:16761035,plum:14524637,powderblue:11591910,purple:8388736,rebeccapurple:6697881,red:16711680,rosybrown:12357519,royalblue:4286945,saddlebrown:9127187,salmon:16416882,sandybrown:16032864,seagreen:3050327,seashell:16774638,sienna:10506797,silver:12632256,skyblue:8900331,slateblue:6970061,slategray:7372944,slategrey:7372944,snow:16775930,springgreen:65407,steelblue:4620980,tan:13808780,teal:32896,thistle:14204888,tomato:16737095,turquoise:4251856,violet:15631086,wheat:16113331,white:16777215,whitesmoke:16119285,yellow:16776960,yellowgreen:10145074},xh={h:0,s:0,l:0},m1={h:0,s:0,l:0};function sE(t,e,n){return n<0&&(n+=1),n>1&&(n-=1),n<1/6?t+(e-t)*6*n:n<1/2?e:n<2/3?t+(e-t)*6*(2/3-n):t}let ir=class{constructor(e,n,r){return this.isColor=!0,this.r=1,this.g=1,this.b=1,this.set(e,n,r)}set(e,n,r){if(n===void 0&&r===void 0){const i=e;i&&i.isColor?this.copy(i):typeof i=="number"?this.setHex(i):typeof i=="string"&&this.setStyle(i)}else this.setRGB(e,n,r);return this}setScalar(e){return this.r=e,this.g=e,this.b=e,this}setHex(e,n=al){return e=Math.floor(e),this.r=(e>>16&255)/255,this.g=(e>>8&255)/255,this.b=(e&255)/255,Fr.colorSpaceToWorking(this,n),this}setRGB(e,n,r,i=Fr.workingColorSpace){return this.r=e,this.g=n,this.b=r,Fr.colorSpaceToWorking(this,i),this}setHSL(e,n,r,i=Fr.workingColorSpace){if(e=u0e(e,1),n=fr(n,0,1),r=fr(r,0,1),n===0)this.r=this.g=this.b=r;else{const s=r<=.5?r*(1+n):r+n-r*n,o=2*r-s;this.r=sE(o,s,e+1/3),this.g=sE(o,s,e),this.b=sE(o,s,e-1/3)}return Fr.colorSpaceToWorking(this,i),this}setStyle(e,n=al){function r(s){s!==void 0&&parseFloat(s)<1&&Hn("Color: Alpha component of "+e+" will be ignored.")}let i;if(i=/^(\w+)\(([^\)]*)\)/.exec(e)){let s;const o=i[1],l=i[2];switch(o){case"rgb":case"rgba":if(s=/^\s*(\d+)\s*,\s*(\d+)\s*,\s*(\d+)\s*(?:,\s*(\d*\.?\d+)\s*)?$/.exec(l))return r(s[4]),this.setRGB(Math.min(255,parseInt(s[1],10))/255,Math.min(255,parseInt(s[2],10))/255,Math.min(255,parseInt(s[3],10))/255,n);if(s=/^\s*(\d+)\%\s*,\s*(\d+)\%\s*,\s*(\d+)\%\s*(?:,\s*(\d*\.?\d+)\s*)?$/.exec(l))return r(s[4]),this.setRGB(Math.min(100,parseInt(s[1],10))/100,Math.min(100,parseInt(s[2],10))/100,Math.min(100,parseInt(s[3],10))/100,n);break;case"hsl":case"hsla":if(s=/^\s*(\d*\.?\d+)\s*,\s*(\d*\.?\d+)\%\s*,\s*(\d*\.?\d+)\%\s*(?:,\s*(\d*\.?\d+)\s*)?$/.exec(l))return r(s[4]),this.setHSL(parseFloat(s[1])/360,parseFloat(s[2])/100,parseFloat(s[3])/100,n);break;default:Hn("Color: Unknown color model "+e)}}else if(i=/^\#([A-Fa-f\d]+)$/.exec(e)){const s=i[1],o=s.length;if(o===3)return this.setRGB(parseInt(s.charAt(0),16)/15,parseInt(s.charAt(1),16)/15,parseInt(s.charAt(2),16)/15,n);if(o===6)return this.setHex(parseInt(s,16),n);Hn("Color: Invalid hex color "+e)}else if(e&&e.length>0)return this.setColorName(e,n);return this}setColorName(e,n=al){const r=YJ[e.toLowerCase()];return r!==void 0?this.setHex(r,n):Hn("Color: Unknown color "+e),this}clone(){return new this.constructor(this.r,this.g,this.b)}copy(e){return this.r=e.r,this.g=e.g,this.b=e.b,this}copySRGBToLinear(e){return this.r=um(e.r),this.g=um(e.g),this.b=um(e.b),this}copyLinearToSRGB(e){return this.r=zx(e.r),this.g=zx(e.g),this.b=zx(e.b),this}convertSRGBToLinear(){return this.copySRGBToLinear(this),this}convertLinearToSRGB(){return this.copyLinearToSRGB(this),this}getHex(e=al){return Fr.workingToColorSpace(Rs.copy(this),e),Math.round(fr(Rs.r*255,0,255))*65536+Math.round(fr(Rs.g*255,0,255))*256+Math.round(fr(Rs.b*255,0,255))}getHexString(e=al){return("000000"+this.getHex(e).toString(16)).slice(-6)}getHSL(e,n=Fr.workingColorSpace){Fr.workingToColorSpace(Rs.copy(this),n);const r=Rs.r,i=Rs.g,s=Rs.b,o=Math.max(r,i,s),l=Math.min(r,i,s);let c,d;const u=(l+o)/2;if(l===o)c=0,d=0;else{const m=o-l;switch(d=u<=.5?m/(o+l):m/(2-o-l),o){case r:c=(i-s)/m+(i<s?6:0);break;case i:c=(s-r)/m+2;break;case s:c=(r-i)/m+4;break}c/=6}return e.h=c,e.s=d,e.l=u,e}getRGB(e,n=Fr.workingColorSpace){return Fr.workingToColorSpace(Rs.copy(this),n),e.r=Rs.r,e.g=Rs.g,e.b=Rs.b,e}getStyle(e=al){Fr.workingToColorSpace(Rs.copy(this),e);const n=Rs.r,r=Rs.g,i=Rs.b;return e!==al?`color(${e} ${n.toFixed(3)} ${r.toFixed(3)} ${i.toFixed(3)})`:`rgb(${Math.round(n*255)},${Math.round(r*255)},${Math.round(i*255)})`}offsetHSL(e,n,r){return this.getHSL(xh),this.setHSL(xh.h+e,xh.s+n,xh.l+r)}add(e){return this.r+=e.r,this.g+=e.g,this.b+=e.b,this}addColors(e,n){return this.r=e.r+n.r,this.g=e.g+n.g,this.b=e.b+n.b,this}addScalar(e){return this.r+=e,this.g+=e,this.b+=e,this}sub(e){return this.r=Math.max(0,this.r-e.r),this.g=Math.max(0,this.g-e.g),this.b=Math.max(0,this.b-e.b),this}multiply(e){return this.r*=e.r,this.g*=e.g,this.b*=e.b,this}multiplyScalar(e){return this.r*=e,this.g*=e,this.b*=e,this}lerp(e,n){return this.r+=(e.r-this.r)*n,this.g+=(e.g-this.g)*n,this.b+=(e.b-this.b)*n,this}lerpColors(e,n,r){return this.r=e.r+(n.r-e.r)*r,this.g=e.g+(n.g-e.g)*r,this.b=e.b+(n.b-e.b)*r,this}lerpHSL(e,n){this.getHSL(xh),e.getHSL(m1);const r=HM(xh.h,m1.h,n),i=HM(xh.s,m1.s,n),s=HM(xh.l,m1.l,n);return this.setHSL(r,i,s),this}setFromVector3(e){return this.r=e.x,this.g=e.y,this.b=e.z,this}applyMatrix3(e){const n=this.r,r=this.g,i=this.b,s=e.elements;return this.r=s[0]*n+s[3]*r+s[6]*i,this.g=s[1]*n+s[4]*r+s[7]*i,this.b=s[2]*n+s[5]*r+s[8]*i,this}equals(e){return e.r===this.r&&e.g===this.g&&e.b===this.b}fromArray(e,n=0){return this.r=e[n],this.g=e[n+1],this.b=e[n+2],this}toArray(e=[],n=0){return e[n]=this.r,e[n+1]=this.g,e[n+2]=this.b,e}fromBufferAttribute(e,n){return this.r=e.getX(n),this.g=e.getY(n),this.b=e.getZ(n),this}toJSON(){return this.getHex()}*[Symbol.iterator](){yield this.r,yield this.g,yield this.b}};const Rs=new ir;ir.NAMES=YJ;let C0e=0,jy=class extends Wg{constructor(){super(),this.isMaterial=!0,Object.defineProperty(this,"id",{value:C0e++}),this.uuid=pS(),this.name="",this.type="Material",this.blending=Ox,this.side=_p,this.vertexColors=!1,this.opacity=1,this.transparent=!1,this.alphaHash=!1,this.blendSrc=EF,this.blendDst=DF,this.blendEquation=Df,this.blendSrcAlpha=null,this.blendDstAlpha=null,this.blendEquationAlpha=null,this.blendColor=new ir(0,0,0),this.blendAlpha=0,this.depthFunc=Jx,this.depthTest=!0,this.depthWrite=!0,this.stencilWriteMask=255,this.stencilFunc=d6,this.stencilRef=0,this.stencilFuncMask=255,this.stencilFail=Eb,this.stencilZFail=Eb,this.stencilZPass=Eb,this.stencilWrite=!1,this.clippingPlanes=null,this.clipIntersection=!1,this.clipShadows=!1,this.shadowSide=null,this.colorWrite=!0,this.precision=null,this.polygonOffset=!1,this.polygonOffsetFactor=0,this.polygonOffsetUnits=0,this.dithering=!1,this.alphaToCoverage=!1,this.premultipliedAlpha=!1,this.forceSinglePass=!1,this.allowOverride=!0,this.visible=!0,this.toneMapped=!0,this.userData={},this.version=0,this._alphaTest=0}get alphaTest(){return this._alphaTest}set alphaTest(e){this._alphaTest>0!=e>0&&this.version++,this._alphaTest=e}onBeforeRender(){}onBeforeCompile(){}customProgramCacheKey(){return this.onBeforeCompile.toString()}setValues(e){if(e!==void 0)for(const n in e){const r=e[n];if(r===void 0){Hn(`Material: parameter '${n}' has value of undefined.`);continue}const i=this[n];if(i===void 0){Hn(`Material: '${n}' is not a property of THREE.${this.type}.`);continue}i&&i.isColor?i.set(r):i&&i.isVector3&&r&&r.isVector3?i.copy(r):this[n]=r}}toJSON(e){const n=e===void 0||typeof e=="string";n&&(e={textures:{},images:{}});const r={metadata:{version:4.7,type:"Material",generator:"Material.toJSON"}};r.uuid=this.uuid,r.type=this.type,this.name!==""&&(r.name=this.name),this.color&&this.color.isColor&&(r.color=this.color.getHex()),this.roughness!==void 0&&(r.roughness=this.roughness),this.metalness!==void 0&&(r.metalness=this.metalness),this.sheen!==void 0&&(r.sheen=this.sheen),this.sheenColor&&this.sheenColor.isColor&&(r.sheenColor=this.sheenColor.getHex()),this.sheenRoughness!==void 0&&(r.sheenRoughness=this.sheenRoughness),this.emissive&&this.emissive.isColor&&(r.emissive=this.emissive.getHex()),this.emissiveIntensity!==void 0&&this.emissiveIntensity!==1&&(r.emissiveIntensity=this.emissiveIntensity),this.specular&&this.specular.isColor&&(r.specular=this.specular.getHex()),this.specularIntensity!==void 0&&(r.specularIntensity=this.specularIntensity),this.specularColor&&this.specularColor.isColor&&(r.specularColor=this.specularColor.getHex()),this.shininess!==void 0&&(r.shininess=this.shininess),this.clearcoat!==void 0&&(r.clearcoat=this.clearcoat),this.clearcoatRoughness!==void 0&&(r.clearcoatRoughness=this.clearcoatRoughness),this.clearcoatMap&&this.clearcoatMap.isTexture&&(r.clearcoatMap=this.clearcoatMap.toJSON(e).uuid),this.clearcoatRoughnessMap&&this.clearcoatRoughnessMap.isTexture&&(r.clearcoatRoughnessMap=this.clearcoatRoughnessMap.toJSON(e).uuid),this.clearcoatNormalMap&&this.clearcoatNormalMap.isTexture&&(r.clearcoatNormalMap=this.clearcoatNormalMap.toJSON(e).uuid,r.clearcoatNormalScale=this.clearcoatNormalScale.toArray()),this.sheenColorMap&&this.sheenColorMap.isTexture&&(r.sheenColorMap=this.sheenColorMap.toJSON(e).uuid),this.sheenRoughnessMap&&this.sheenRoughnessMap.isTexture&&(r.sheenRoughnessMap=this.sheenRoughnessMap.toJSON(e).uuid),this.dispersion!==void 0&&(r.dispersion=this.dispersion),this.iridescence!==void 0&&(r.iridescence=this.iridescence),this.iridescenceIOR!==void 0&&(r.iridescenceIOR=this.iridescenceIOR),this.iridescenceThicknessRange!==void 0&&(r.iridescenceThicknessRange=this.iridescenceThicknessRange),this.iridescenceMap&&this.iridescenceMap.isTexture&&(r.iridescenceMap=this.iridescenceMap.toJSON(e).uuid),this.iridescenceThicknessMap&&this.iridescenceThicknessMap.isTexture&&(r.iridescenceThicknessMap=this.iridescenceThicknessMap.toJSON(e).uuid),this.anisotropy!==void 0&&(r.anisotropy=this.anisotropy),this.anisotropyRotation!==void 0&&(r.anisotropyRotation=this.anisotropyRotation),this.anisotropyMap&&this.anisotropyMap.isTexture&&(r.anisotropyMap=this.anisotropyMap.toJSON(e).uuid),this.map&&this.map.isTexture&&(r.map=this.map.toJSON(e).uuid),this.matcap&&this.matcap.isTexture&&(r.matcap=this.matcap.toJSON(e).uuid),this.alphaMap&&this.alphaMap.isTexture&&(r.alphaMap=this.alphaMap.toJSON(e).uuid),this.lightMap&&this.lightMap.isTexture&&(r.lightMap=this.lightMap.toJSON(e).uuid,r.lightMapIntensity=this.lightMapIntensity),this.aoMap&&this.aoMap.isTexture&&(r.aoMap=this.aoMap.toJSON(e).uuid,r.aoMapIntensity=this.aoMapIntensity),this.bumpMap&&this.bumpMap.isTexture&&(r.bumpMap=this.bumpMap.toJSON(e).uuid,r.bumpScale=this.bumpScale),this.normalMap&&this.normalMap.isTexture&&(r.normalMap=this.normalMap.toJSON(e).uuid,r.normalMapType=this.normalMapType,r.normalScale=this.normalScale.toArray()),this.displacementMap&&this.displacementMap.isTexture&&(r.displacementMap=this.displacementMap.toJSON(e).uuid,r.displacementScale=this.displacementScale,r.displacementBias=this.displacementBias),this.roughnessMap&&this.roughnessMap.isTexture&&(r.roughnessMap=this.roughnessMap.toJSON(e).uuid),this.metalnessMap&&this.metalnessMap.isTexture&&(r.metalnessMap=this.metalnessMap.toJSON(e).uuid),this.emissiveMap&&this.emissiveMap.isTexture&&(r.emissiveMap=this.emissiveMap.toJSON(e).uuid),this.specularMap&&this.specularMap.isTexture&&(r.specularMap=this.specularMap.toJSON(e).uuid),this.specularIntensityMap&&this.specularIntensityMap.isTexture&&(r.specularIntensityMap=this.specularIntensityMap.toJSON(e).uuid),this.specularColorMap&&this.specularColorMap.isTexture&&(r.specularColorMap=this.specularColorMap.toJSON(e).uuid),this.envMap&&this.envMap.isTexture&&(r.envMap=this.envMap.toJSON(e).uuid,this.combine!==void 0&&(r.combine=this.combine)),this.envMapRotation!==void 0&&(r.envMapRotation=this.envMapRotation.toArray()),this.envMapIntensity!==void 0&&(r.envMapIntensity=this.envMapIntensity),this.reflectivity!==void 0&&(r.reflectivity=this.reflectivity),this.refractionRatio!==void 0&&(r.refractionRatio=this.refractionRatio),this.gradientMap&&this.gradientMap.isTexture&&(r.gradientMap=this.gradientMap.toJSON(e).uuid),this.transmission!==void 0&&(r.transmission=this.transmission),this.transmissionMap&&this.transmissionMap.isTexture&&(r.transmissionMap=this.transmissionMap.toJSON(e).uuid),this.thickness!==void 0&&(r.thickness=this.thickness),this.thicknessMap&&this.thicknessMap.isTexture&&(r.thicknessMap=this.thicknessMap.toJSON(e).uuid),this.attenuationDistance!==void 0&&this.attenuationDistance!==1/0&&(r.attenuationDistance=this.attenuationDistance),this.attenuationColor!==void 0&&(r.attenuationColor=this.attenuationColor.getHex()),this.size!==void 0&&(r.size=this.size),this.shadowSide!==null&&(r.shadowSide=this.shadowSide),this.sizeAttenuation!==void 0&&(r.sizeAttenuation=this.sizeAttenuation),this.blending!==Ox&&(r.blending=this.blending),this.side!==_p&&(r.side=this.side),this.vertexColors===!0&&(r.vertexColors=!0),this.opacity<1&&(r.opacity=this.opacity),this.transparent===!0&&(r.transparent=!0),this.blendSrc!==EF&&(r.blendSrc=this.blendSrc),this.blendDst!==DF&&(r.blendDst=this.blendDst),this.blendEquation!==Df&&(r.blendEquation=this.blendEquation),this.blendSrcAlpha!==null&&(r.blendSrcAlpha=this.blendSrcAlpha),this.blendDstAlpha!==null&&(r.blendDstAlpha=this.blendDstAlpha),this.blendEquationAlpha!==null&&(r.blendEquationAlpha=this.blendEquationAlpha),this.blendColor&&this.blendColor.isColor&&(r.blendColor=this.blendColor.getHex()),this.blendAlpha!==0&&(r.blendAlpha=this.blendAlpha),this.depthFunc!==Jx&&(r.depthFunc=this.depthFunc),this.depthTest===!1&&(r.depthTest=this.depthTest),this.depthWrite===!1&&(r.depthWrite=this.depthWrite),this.colorWrite===!1&&(r.colorWrite=this.colorWrite),this.stencilWriteMask!==255&&(r.stencilWriteMask=this.stencilWriteMask),this.stencilFunc!==d6&&(r.stencilFunc=this.stencilFunc),this.stencilRef!==0&&(r.stencilRef=this.stencilRef),this.stencilFuncMask!==255&&(r.stencilFuncMask=this.stencilFuncMask),this.stencilFail!==Eb&&(r.stencilFail=this.stencilFail),this.stencilZFail!==Eb&&(r.stencilZFail=this.stencilZFail),this.stencilZPass!==Eb&&(r.stencilZPass=this.stencilZPass),this.stencilWrite===!0&&(r.stencilWrite=this.stencilWrite),this.rotation!==void 0&&this.rotation!==0&&(r.rotation=this.rotation),this.polygonOffset===!0&&(r.polygonOffset=!0),this.polygonOffsetFactor!==0&&(r.polygonOffsetFactor=this.polygonOffsetFactor),this.polygonOffsetUnits!==0&&(r.polygonOffsetUnits=this.polygonOffsetUnits),this.linewidth!==void 0&&this.linewidth!==1&&(r.linewidth=this.linewidth),this.dashSize!==void 0&&(r.dashSize=this.dashSize),this.gapSize!==void 0&&(r.gapSize=this.gapSize),this.scale!==void 0&&(r.scale=this.scale),this.dithering===!0&&(r.dithering=!0),this.alphaTest>0&&(r.alphaTest=this.alphaTest),this.alphaHash===!0&&(r.alphaHash=!0),this.alphaToCoverage===!0&&(r.alphaToCoverage=!0),this.premultipliedAlpha===!0&&(r.premultipliedAlpha=!0),this.forceSinglePass===!0&&(r.forceSinglePass=!0),this.wireframe===!0&&(r.wireframe=!0),this.wireframeLinewidth>1&&(r.wireframeLinewidth=this.wireframeLinewidth),this.wireframeLinecap!=="round"&&(r.wireframeLinecap=this.wireframeLinecap),this.wireframeLinejoin!=="round"&&(r.wireframeLinejoin=this.wireframeLinejoin),this.flatShading===!0&&(r.flatShading=!0),this.visible===!1&&(r.visible=!1),this.toneMapped===!1&&(r.toneMapped=!1),this.fog===!1&&(r.fog=!1),Object.keys(this.userData).length>0&&(r.userData=this.userData);function i(s){const o=[];for(const l in s){const c=s[l];delete c.metadata,o.push(c)}return o}if(n){const s=i(e.textures),o=i(e.images);s.length>0&&(r.textures=s),o.length>0&&(r.images=o)}return r}clone(){return new this.constructor().copy(this)}copy(e){this.name=e.name,this.blending=e.blending,this.side=e.side,this.vertexColors=e.vertexColors,this.opacity=e.opacity,this.transparent=e.transparent,this.blendSrc=e.blendSrc,this.blendDst=e.blendDst,this.blendEquation=e.blendEquation,this.blendSrcAlpha=e.blendSrcAlpha,this.blendDstAlpha=e.blendDstAlpha,this.blendEquationAlpha=e.blendEquationAlpha,this.blendColor.copy(e.blendColor),this.blendAlpha=e.blendAlpha,this.depthFunc=e.depthFunc,this.depthTest=e.depthTest,this.depthWrite=e.depthWrite,this.stencilWriteMask=e.stencilWriteMask,this.stencilFunc=e.stencilFunc,this.stencilRef=e.stencilRef,this.stencilFuncMask=e.stencilFuncMask,this.stencilFail=e.stencilFail,this.stencilZFail=e.stencilZFail,this.stencilZPass=e.stencilZPass,this.stencilWrite=e.stencilWrite;const n=e.clippingPlanes;let r=null;if(n!==null){const i=n.length;r=new Array(i);for(let s=0;s!==i;++s)r[s]=n[s].clone()}return this.clippingPlanes=r,this.clipIntersection=e.clipIntersection,this.clipShadows=e.clipShadows,this.shadowSide=e.shadowSide,this.colorWrite=e.colorWrite,this.precision=e.precision,this.polygonOffset=e.polygonOffset,this.polygonOffsetFactor=e.polygonOffsetFactor,this.polygonOffsetUnits=e.polygonOffsetUnits,this.dithering=e.dithering,this.alphaTest=e.alphaTest,this.alphaHash=e.alphaHash,this.alphaToCoverage=e.alphaToCoverage,this.premultipliedAlpha=e.premultipliedAlpha,this.forceSinglePass=e.forceSinglePass,this.visible=e.visible,this.toneMapped=e.toneMapped,this.userData=JSON.parse(JSON.stringify(e.userData)),this}dispose(){this.dispatchEvent({type:"dispose"})}set needsUpdate(e){e===!0&&this.version++}},yO=class extends jy{constructor(e){super(),this.isMeshBasicMaterial=!0,this.type="MeshBasicMaterial",this.color=new ir(16777215),this.map=null,this.lightMap=null,this.lightMapIntensity=1,this.aoMap=null,this.aoMapIntensity=1,this.specularMap=null,this.alphaMap=null,this.envMap=null,this.envMapRotation=new kp,this.combine=cO,this.reflectivity=1,this.refractionRatio=.98,this.wireframe=!1,this.wireframeLinewidth=1,this.wireframeLinecap="round",this.wireframeLinejoin="round",this.fog=!0,this.setValues(e)}copy(e){return super.copy(e),this.color.copy(e.color),this.map=e.map,this.lightMap=e.lightMap,this.lightMapIntensity=e.lightMapIntensity,this.aoMap=e.aoMap,this.aoMapIntensity=e.aoMapIntensity,this.specularMap=e.specularMap,this.alphaMap=e.alphaMap,this.envMap=e.envMap,this.envMapRotation.copy(e.envMapRotation),this.combine=e.combine,this.reflectivity=e.reflectivity,this.refractionRatio=e.refractionRatio,this.wireframe=e.wireframe,this.wireframeLinewidth=e.wireframeLinewidth,this.wireframeLinecap=e.wireframeLinecap,this.wireframeLinejoin=e.wireframeLinejoin,this.fog=e.fog,this}};const fi=new Nt,h1=new tr;let P0e=0,co=class{constructor(e,n,r=!1){if(Array.isArray(e))throw new TypeError("THREE.BufferAttribute: array should be a Typed Array.");this.isBufferAttribute=!0,Object.defineProperty(this,"id",{value:P0e++}),this.name="",this.array=e,this.itemSize=n,this.count=e!==void 0?e.length/n:0,this.normalized=r,this.usage=u6,this.updateRanges=[],this.gpuType=tm,this.version=0}onUploadCallback(){}set needsUpdate(e){e===!0&&this.version++}setUsage(e){return this.usage=e,this}addUpdateRange(e,n){this.updateRanges.push({start:e,count:n})}clearUpdateRanges(){this.updateRanges.length=0}copy(e){return this.name=e.name,this.array=new e.array.constructor(e.array),this.itemSize=e.itemSize,this.count=e.count,this.normalized=e.normalized,this.usage=e.usage,this.gpuType=e.gpuType,this}copyAt(e,n,r){e*=this.itemSize,r*=n.itemSize;for(let i=0,s=this.itemSize;i<s;i++)this.array[e+i]=n.array[r+i];return this}copyArray(e){return this.array.set(e),this}applyMatrix3(e){if(this.itemSize===2)for(let n=0,r=this.count;n<r;n++)h1.fromBufferAttribute(this,n),h1.applyMatrix3(e),this.setXY(n,h1.x,h1.y);else if(this.itemSize===3)for(let n=0,r=this.count;n<r;n++)fi.fromBufferAttribute(this,n),fi.applyMatrix3(e),this.setXYZ(n,fi.x,fi.y,fi.z);return this}applyMatrix4(e){for(let n=0,r=this.count;n<r;n++)fi.fromBufferAttribute(this,n),fi.applyMatrix4(e),this.setXYZ(n,fi.x,fi.y,fi.z);return this}applyNormalMatrix(e){for(let n=0,r=this.count;n<r;n++)fi.fromBufferAttribute(this,n),fi.applyNormalMatrix(e),this.setXYZ(n,fi.x,fi.y,fi.z);return this}transformDirection(e){for(let n=0,r=this.count;n<r;n++)fi.fromBufferAttribute(this,n),fi.transformDirection(e),this.setXYZ(n,fi.x,fi.y,fi.z);return this}set(e,n=0){return this.array.set(e,n),this}getComponent(e,n){let r=this.array[e*this.itemSize+n];return this.normalized&&(r=Lv(r,this.array)),r}setComponent(e,n,r){return this.normalized&&(r=Ao(r,this.array)),this.array[e*this.itemSize+n]=r,this}getX(e){let n=this.array[e*this.itemSize];return this.normalized&&(n=Lv(n,this.array)),n}setX(e,n){return this.normalized&&(n=Ao(n,this.array)),this.array[e*this.itemSize]=n,this}getY(e){let n=this.array[e*this.itemSize+1];return this.normalized&&(n=Lv(n,this.array)),n}setY(e,n){return this.normalized&&(n=Ao(n,this.array)),this.array[e*this.itemSize+1]=n,this}getZ(e){let n=this.array[e*this.itemSize+2];return this.normalized&&(n=Lv(n,this.array)),n}setZ(e,n){return this.normalized&&(n=Ao(n,this.array)),this.array[e*this.itemSize+2]=n,this}getW(e){let n=this.array[e*this.itemSize+3];return this.normalized&&(n=Lv(n,this.array)),n}setW(e,n){return this.normalized&&(n=Ao(n,this.array)),this.array[e*this.itemSize+3]=n,this}setXY(e,n,r){return e*=this.itemSize,this.normalized&&(n=Ao(n,this.array),r=Ao(r,this.array)),this.array[e+0]=n,this.array[e+1]=r,this}setXYZ(e,n,r,i){return e*=this.itemSize,this.normalized&&(n=Ao(n,this.array),r=Ao(r,this.array),i=Ao(i,this.array)),this.array[e+0]=n,this.array[e+1]=r,this.array[e+2]=i,this}setXYZW(e,n,r,i,s){return e*=this.itemSize,this.normalized&&(n=Ao(n,this.array),r=Ao(r,this.array),i=Ao(i,this.array),s=Ao(s,this.array)),this.array[e+0]=n,this.array[e+1]=r,this.array[e+2]=i,this.array[e+3]=s,this}onUpload(e){return this.onUploadCallback=e,this}clone(){return new this.constructor(this.array,this.itemSize).copy(this)}toJSON(){const e={itemSize:this.itemSize,type:this.array.constructor.name,array:Array.from(this.array),normalized:this.normalized};return this.name!==""&&(e.name=this.name),this.usage!==u6&&(e.usage=this.usage),e}},QJ=class extends co{constructor(e,n,r){super(new Uint16Array(e),n,r)}},JJ=class extends co{constructor(e,n,r){super(new Uint32Array(e),n,r)}},dl=class extends co{constructor(e,n,r){super(new Float32Array(e),n,r)}},T0e=0;const Ll=new wi,oE=new gl,Hb=new Nt,tl=new mp,Bv=new mp,qi=new Nt;let dc=class ZJ extends Wg{constructor(){super(),this.isBufferGeometry=!0,Object.defineProperty(this,"id",{value:T0e++}),this.uuid=pS(),this.name="",this.type="BufferGeometry",this.index=null,this.indirect=null,this.attributes={},this.morphAttributes={},this.morphTargetsRelative=!1,this.groups=[],this.boundingBox=null,this.boundingSphere=null,this.drawRange={start:0,count:1/0},this.userData={}}getIndex(){return this.index}setIndex(e){return Array.isArray(e)?this.index=new(HJ(e)?JJ:QJ)(e,1):this.index=e,this}setIndirect(e){return this.indirect=e,this}getIndirect(){return this.indirect}getAttribute(e){return this.attributes[e]}setAttribute(e,n){return this.attributes[e]=n,this}deleteAttribute(e){return delete this.attributes[e],this}hasAttribute(e){return this.attributes[e]!==void 0}addGroup(e,n,r=0){this.groups.push({start:e,count:n,materialIndex:r})}clearGroups(){this.groups=[]}setDrawRange(e,n){this.drawRange.start=e,this.drawRange.count=n}applyMatrix4(e){const n=this.attributes.position;n!==void 0&&(n.applyMatrix4(e),n.needsUpdate=!0);const r=this.attributes.normal;if(r!==void 0){const s=new ar().getNormalMatrix(e);r.applyNormalMatrix(s),r.needsUpdate=!0}const i=this.attributes.tangent;return i!==void 0&&(i.transformDirection(e),i.needsUpdate=!0),this.boundingBox!==null&&this.computeBoundingBox(),this.boundingSphere!==null&&this.computeBoundingSphere(),this}applyQuaternion(e){return Ll.makeRotationFromQuaternion(e),this.applyMatrix4(Ll),this}rotateX(e){return Ll.makeRotationX(e),this.applyMatrix4(Ll),this}rotateY(e){return Ll.makeRotationY(e),this.applyMatrix4(Ll),this}rotateZ(e){return Ll.makeRotationZ(e),this.applyMatrix4(Ll),this}translate(e,n,r){return Ll.makeTranslation(e,n,r),this.applyMatrix4(Ll),this}scale(e,n,r){return Ll.makeScale(e,n,r),this.applyMatrix4(Ll),this}lookAt(e){return oE.lookAt(e),oE.updateMatrix(),this.applyMatrix4(oE.matrix),this}center(){return this.computeBoundingBox(),this.boundingBox.getCenter(Hb).negate(),this.translate(Hb.x,Hb.y,Hb.z),this}setFromPoints(e){const n=this.getAttribute("position");if(n===void 0){const r=[];for(let i=0,s=e.length;i<s;i++){const o=e[i];r.push(o.x,o.y,o.z||0)}this.setAttribute("position",new dl(r,3))}else{const r=Math.min(e.length,n.count);for(let i=0;i<r;i++){const s=e[i];n.setXYZ(i,s.x,s.y,s.z||0)}e.length>n.count&&Hn("BufferGeometry: Buffer size too small for points data. Use .dispose() and create a new geometry."),n.needsUpdate=!0}return this}computeBoundingBox(){this.boundingBox===null&&(this.boundingBox=new mp);const e=this.attributes.position,n=this.morphAttributes.position;if(e&&e.isGLBufferAttribute){si("BufferGeometry.computeBoundingBox(): GLBufferAttribute requires a manual bounding box.",this),this.boundingBox.set(new Nt(-1/0,-1/0,-1/0),new Nt(1/0,1/0,1/0));return}if(e!==void 0){if(this.boundingBox.setFromBufferAttribute(e),n)for(let r=0,i=n.length;r<i;r++){const s=n[r];tl.setFromBufferAttribute(s),this.morphTargetsRelative?(qi.addVectors(this.boundingBox.min,tl.min),this.boundingBox.expandByPoint(qi),qi.addVectors(this.boundingBox.max,tl.max),this.boundingBox.expandByPoint(qi)):(this.boundingBox.expandByPoint(tl.min),this.boundingBox.expandByPoint(tl.max))}}else this.boundingBox.makeEmpty();(isNaN(this.boundingBox.min.x)||isNaN(this.boundingBox.min.y)||isNaN(this.boundingBox.min.z))&&si('BufferGeometry.computeBoundingBox(): Computed min/max have NaN values. The "position" attribute is likely to have NaN values.',this)}computeBoundingSphere(){this.boundingSphere===null&&(this.boundingSphere=new iT);const e=this.attributes.position,n=this.morphAttributes.position;if(e&&e.isGLBufferAttribute){si("BufferGeometry.computeBoundingSphere(): GLBufferAttribute requires a manual bounding sphere.",this),this.boundingSphere.set(new Nt,1/0);return}if(e){const r=this.boundingSphere.center;if(tl.setFromBufferAttribute(e),n)for(let s=0,o=n.length;s<o;s++){const l=n[s];Bv.setFromBufferAttribute(l),this.morphTargetsRelative?(qi.addVectors(tl.min,Bv.min),tl.expandByPoint(qi),qi.addVectors(tl.max,Bv.max),tl.expandByPoint(qi)):(tl.expandByPoint(Bv.min),tl.expandByPoint(Bv.max))}tl.getCenter(r);let i=0;for(let s=0,o=e.count;s<o;s++)qi.fromBufferAttribute(e,s),i=Math.max(i,r.distanceToSquared(qi));if(n)for(let s=0,o=n.length;s<o;s++){const l=n[s],c=this.morphTargetsRelative;for(let d=0,u=l.count;d<u;d++)qi.fromBufferAttribute(l,d),c&&(Hb.fromBufferAttribute(e,d),qi.add(Hb)),i=Math.max(i,r.distanceToSquared(qi))}this.boundingSphere.radius=Math.sqrt(i),isNaN(this.boundingSphere.radius)&&si('BufferGeometry.computeBoundingSphere(): Computed radius is NaN. The "position" attribute is likely to have NaN values.',this)}}computeTangents(){const e=this.index,n=this.attributes;if(e===null||n.position===void 0||n.normal===void 0||n.uv===void 0){si("BufferGeometry: .computeTangents() failed. Missing required attributes (index, position, normal or uv)");return}const r=n.position,i=n.normal,s=n.uv;this.hasAttribute("tangent")===!1&&this.setAttribute("tangent",new co(new Float32Array(4*r.count),4));const o=this.getAttribute("tangent"),l=[],c=[];for(let F=0;F<r.count;F++)l[F]=new Nt,c[F]=new Nt;const d=new Nt,u=new Nt,m=new Nt,p=new tr,f=new tr,x=new tr,v=new Nt,b=new Nt;function g(F,k,E){d.fromBufferAttribute(r,F),u.fromBufferAttribute(r,k),m.fromBufferAttribute(r,E),p.fromBufferAttribute(s,F),f.fromBufferAttribute(s,k),x.fromBufferAttribute(s,E),u.sub(d),m.sub(d),f.sub(p),x.sub(p);const $=1/(f.x*x.y-x.x*f.y);isFinite($)&&(v.copy(u).multiplyScalar(x.y).addScaledVector(m,-f.y).multiplyScalar($),b.copy(m).multiplyScalar(f.x).addScaledVector(u,-x.x).multiplyScalar($),l[F].add(v),l[k].add(v),l[E].add(v),c[F].add(b),c[k].add(b),c[E].add(b))}let S=this.groups;S.length===0&&(S=[{start:0,count:e.count}]);for(let F=0,k=S.length;F<k;++F){const E=S[F],$=E.start,z=E.count;for(let X=$,R=$+z;X<R;X+=3)g(e.getX(X+0),e.getX(X+1),e.getX(X+2))}const N=new Nt,P=new Nt,C=new Nt,A=new Nt;function T(F){C.fromBufferAttribute(i,F),A.copy(C);const k=l[F];N.copy(k),N.sub(C.multiplyScalar(C.dot(k))).normalize(),P.crossVectors(A,k);const $=P.dot(c[F])<0?-1:1;o.setXYZW(F,N.x,N.y,N.z,$)}for(let F=0,k=S.length;F<k;++F){const E=S[F],$=E.start,z=E.count;for(let X=$,R=$+z;X<R;X+=3)T(e.getX(X+0)),T(e.getX(X+1)),T(e.getX(X+2))}}computeVertexNormals(){const e=this.index,n=this.getAttribute("position");if(n!==void 0){let r=this.getAttribute("normal");if(r===void 0)r=new co(new Float32Array(n.count*3),3),this.setAttribute("normal",r);else for(let p=0,f=r.count;p<f;p++)r.setXYZ(p,0,0,0);const i=new Nt,s=new Nt,o=new Nt,l=new Nt,c=new Nt,d=new Nt,u=new Nt,m=new Nt;if(e)for(let p=0,f=e.count;p<f;p+=3){const x=e.getX(p+0),v=e.getX(p+1),b=e.getX(p+2);i.fromBufferAttribute(n,x),s.fromBufferAttribute(n,v),o.fromBufferAttribute(n,b),u.subVectors(o,s),m.subVectors(i,s),u.cross(m),l.fromBufferAttribute(r,x),c.fromBufferAttribute(r,v),d.fromBufferAttribute(r,b),l.add(u),c.add(u),d.add(u),r.setXYZ(x,l.x,l.y,l.z),r.setXYZ(v,c.x,c.y,c.z),r.setXYZ(b,d.x,d.y,d.z)}else for(let p=0,f=n.count;p<f;p+=3)i.fromBufferAttribute(n,p+0),s.fromBufferAttribute(n,p+1),o.fromBufferAttribute(n,p+2),u.subVectors(o,s),m.subVectors(i,s),u.cross(m),r.setXYZ(p+0,u.x,u.y,u.z),r.setXYZ(p+1,u.x,u.y,u.z),r.setXYZ(p+2,u.x,u.y,u.z);this.normalizeNormals(),r.needsUpdate=!0}}normalizeNormals(){const e=this.attributes.normal;for(let n=0,r=e.count;n<r;n++)qi.fromBufferAttribute(e,n),qi.normalize(),e.setXYZ(n,qi.x,qi.y,qi.z)}toNonIndexed(){function e(l,c){const d=l.array,u=l.itemSize,m=l.normalized,p=new d.constructor(c.length*u);let f=0,x=0;for(let v=0,b=c.length;v<b;v++){l.isInterleavedBufferAttribute?f=c[v]*l.data.stride+l.offset:f=c[v]*u;for(let g=0;g<u;g++)p[x++]=d[f++]}return new co(p,u,m)}if(this.index===null)return Hn("BufferGeometry.toNonIndexed(): BufferGeometry is already non-indexed."),this;const n=new ZJ,r=this.index.array,i=this.attributes;for(const l in i){const c=i[l],d=e(c,r);n.setAttribute(l,d)}const s=this.morphAttributes;for(const l in s){const c=[],d=s[l];for(let u=0,m=d.length;u<m;u++){const p=d[u],f=e(p,r);c.push(f)}n.morphAttributes[l]=c}n.morphTargetsRelative=this.morphTargetsRelative;const o=this.groups;for(let l=0,c=o.length;l<c;l++){const d=o[l];n.addGroup(d.start,d.count,d.materialIndex)}return n}toJSON(){const e={metadata:{version:4.7,type:"BufferGeometry",generator:"BufferGeometry.toJSON"}};if(e.uuid=this.uuid,e.type=this.type,this.name!==""&&(e.name=this.name),Object.keys(this.userData).length>0&&(e.userData=this.userData),this.parameters!==void 0){const c=this.parameters;for(const d in c)c[d]!==void 0&&(e[d]=c[d]);return e}e.data={attributes:{}};const n=this.index;n!==null&&(e.data.index={type:n.array.constructor.name,array:Array.prototype.slice.call(n.array)});const r=this.attributes;for(const c in r){const d=r[c];e.data.attributes[c]=d.toJSON(e.data)}const i={};let s=!1;for(const c in this.morphAttributes){const d=this.morphAttributes[c],u=[];for(let m=0,p=d.length;m<p;m++){const f=d[m];u.push(f.toJSON(e.data))}u.length>0&&(i[c]=u,s=!0)}s&&(e.data.morphAttributes=i,e.data.morphTargetsRelative=this.morphTargetsRelative);const o=this.groups;o.length>0&&(e.data.groups=JSON.parse(JSON.stringify(o)));const l=this.boundingSphere;return l!==null&&(e.data.boundingSphere=l.toJSON()),e}clone(){return new this.constructor().copy(this)}copy(e){this.index=null,this.attributes={},this.morphAttributes={},this.groups=[],this.boundingBox=null,this.boundingSphere=null;const n={};this.name=e.name;const r=e.index;r!==null&&this.setIndex(r.clone());const i=e.attributes;for(const d in i){const u=i[d];this.setAttribute(d,u.clone(n))}const s=e.morphAttributes;for(const d in s){const u=[],m=s[d];for(let p=0,f=m.length;p<f;p++)u.push(m[p].clone(n));this.morphAttributes[d]=u}this.morphTargetsRelative=e.morphTargetsRelative;const o=e.groups;for(let d=0,u=o.length;d<u;d++){const m=o[d];this.addGroup(m.start,m.count,m.materialIndex)}const l=e.boundingBox;l!==null&&(this.boundingBox=l.clone());const c=e.boundingSphere;return c!==null&&(this.boundingSphere=c.clone()),this.drawRange.start=e.drawRange.start,this.drawRange.count=e.drawRange.count,this.userData=e.userData,this}dispose(){this.dispatchEvent({type:"dispose"})}};const C6=new wi,ff=new xO,p1=new iT,P6=new Nt,f1=new Nt,g1=new Nt,b1=new Nt,lE=new Nt,x1=new Nt,T6=new Nt,y1=new Nt;let uc=class extends gl{constructor(e=new dc,n=new yO){super(),this.isMesh=!0,this.type="Mesh",this.geometry=e,this.material=n,this.morphTargetDictionary=void 0,this.morphTargetInfluences=void 0,this.count=1,this.updateMorphTargets()}copy(e,n){return super.copy(e,n),e.morphTargetInfluences!==void 0&&(this.morphTargetInfluences=e.morphTargetInfluences.slice()),e.morphTargetDictionary!==void 0&&(this.morphTargetDictionary=Object.assign({},e.morphTargetDictionary)),this.material=Array.isArray(e.material)?e.material.slice():e.material,this.geometry=e.geometry,this}updateMorphTargets(){const n=this.geometry.morphAttributes,r=Object.keys(n);if(r.length>0){const i=n[r[0]];if(i!==void 0){this.morphTargetInfluences=[],this.morphTargetDictionary={};for(let s=0,o=i.length;s<o;s++){const l=i[s].name||String(s);this.morphTargetInfluences.push(0),this.morphTargetDictionary[l]=s}}}}getVertexPosition(e,n){const r=this.geometry,i=r.attributes.position,s=r.morphAttributes.position,o=r.morphTargetsRelative;n.fromBufferAttribute(i,e);const l=this.morphTargetInfluences;if(s&&l){x1.set(0,0,0);for(let c=0,d=s.length;c<d;c++){const u=l[c],m=s[c];u!==0&&(lE.fromBufferAttribute(m,e),o?x1.addScaledVector(lE,u):x1.addScaledVector(lE.sub(n),u))}n.add(x1)}return n}raycast(e,n){const r=this.geometry,i=this.material,s=this.matrixWorld;i!==void 0&&(r.boundingSphere===null&&r.computeBoundingSphere(),p1.copy(r.boundingSphere),p1.applyMatrix4(s),ff.copy(e.ray).recast(e.near),!(p1.containsPoint(ff.origin)===!1&&(ff.intersectSphere(p1,P6)===null||ff.origin.distanceToSquared(P6)>(e.far-e.near)**2))&&(C6.copy(s).invert(),ff.copy(e.ray).applyMatrix4(C6),!(r.boundingBox!==null&&ff.intersectsBox(r.boundingBox)===!1)&&this._computeIntersections(e,n,ff)))}_computeIntersections(e,n,r){let i;const s=this.geometry,o=this.material,l=s.index,c=s.attributes.position,d=s.attributes.uv,u=s.attributes.uv1,m=s.attributes.normal,p=s.groups,f=s.drawRange;if(l!==null)if(Array.isArray(o))for(let x=0,v=p.length;x<v;x++){const b=p[x],g=o[b.materialIndex],S=Math.max(b.start,f.start),N=Math.min(l.count,Math.min(b.start+b.count,f.start+f.count));for(let P=S,C=N;P<C;P+=3){const A=l.getX(P),T=l.getX(P+1),F=l.getX(P+2);i=v1(this,g,e,r,d,u,m,A,T,F),i&&(i.faceIndex=Math.floor(P/3),i.face.materialIndex=b.materialIndex,n.push(i))}}else{const x=Math.max(0,f.start),v=Math.min(l.count,f.start+f.count);for(let b=x,g=v;b<g;b+=3){const S=l.getX(b),N=l.getX(b+1),P=l.getX(b+2);i=v1(this,o,e,r,d,u,m,S,N,P),i&&(i.faceIndex=Math.floor(b/3),n.push(i))}}else if(c!==void 0)if(Array.isArray(o))for(let x=0,v=p.length;x<v;x++){const b=p[x],g=o[b.materialIndex],S=Math.max(b.start,f.start),N=Math.min(c.count,Math.min(b.start+b.count,f.start+f.count));for(let P=S,C=N;P<C;P+=3){const A=P,T=P+1,F=P+2;i=v1(this,g,e,r,d,u,m,A,T,F),i&&(i.faceIndex=Math.floor(P/3),i.face.materialIndex=b.materialIndex,n.push(i))}}else{const x=Math.max(0,f.start),v=Math.min(c.count,f.start+f.count);for(let b=x,g=v;b<g;b+=3){const S=b,N=b+1,P=b+2;i=v1(this,o,e,r,d,u,m,S,N,P),i&&(i.faceIndex=Math.floor(b/3),n.push(i))}}}};function A0e(t,e,n,r,i,s,o,l){let c;if(e.side===Lo?c=r.intersectTriangle(o,s,i,!0,l):c=r.intersectTriangle(i,s,o,e.side===_p,l),c===null)return null;y1.copy(l),y1.applyMatrix4(t.matrixWorld);const d=n.ray.origin.distanceTo(y1);return d<n.near||d>n.far?null:{distance:d,point:y1.clone(),object:t}}function v1(t,e,n,r,i,s,o,l,c,d){t.getVertexPosition(l,f1),t.getVertexPosition(c,g1),t.getVertexPosition(d,b1);const u=A0e(t,e,n,r,f1,g1,b1,T6);if(u){const m=new Nt;Uv.getBarycoord(T6,f1,g1,b1,m),i&&(u.uv=Uv.getInterpolatedAttribute(i,l,c,d,m,new tr)),s&&(u.uv1=Uv.getInterpolatedAttribute(s,l,c,d,m,new tr)),o&&(u.normal=Uv.getInterpolatedAttribute(o,l,c,d,m,new Nt),u.normal.dot(r.direction)>0&&u.normal.multiplyScalar(-1));const p={a:l,b:c,c:d,normal:new Nt,materialIndex:0};Uv.getNormal(f1,g1,b1,p.normal),u.face=p,u.barycoord=m}return u}let vO=class eZ extends dc{constructor(e=1,n=1,r=1,i=1,s=1,o=1){super(),this.type="BoxGeometry",this.parameters={width:e,height:n,depth:r,widthSegments:i,heightSegments:s,depthSegments:o};const l=this;i=Math.floor(i),s=Math.floor(s),o=Math.floor(o);const c=[],d=[],u=[],m=[];let p=0,f=0;x("z","y","x",-1,-1,r,n,e,o,s,0),x("z","y","x",1,-1,r,n,-e,o,s,1),x("x","z","y",1,1,e,r,n,i,o,2),x("x","z","y",1,-1,e,r,-n,i,o,3),x("x","y","z",1,-1,e,n,r,i,s,4),x("x","y","z",-1,-1,e,n,-r,i,s,5),this.setIndex(c),this.setAttribute("position",new dl(d,3)),this.setAttribute("normal",new dl(u,3)),this.setAttribute("uv",new dl(m,2));function x(v,b,g,S,N,P,C,A,T,F,k){const E=P/T,$=C/F,z=P/2,X=C/2,R=A/2,ne=T+1,re=F+1;let J=0,ue=0;const ie=new Nt;for(let se=0;se<re;se++){const K=se*$-X;for(let ae=0;ae<ne;ae++){const pe=ae*E-z;ie[v]=pe*S,ie[b]=K*N,ie[g]=R,d.push(ie.x,ie.y,ie.z),ie[v]=0,ie[b]=0,ie[g]=A>0?1:-1,u.push(ie.x,ie.y,ie.z),m.push(ae/T),m.push(1-se/F),J+=1}}for(let se=0;se<F;se++)for(let K=0;K<T;K++){const ae=p+K+ne*se,pe=p+K+ne*(se+1),be=p+(K+1)+ne*(se+1),fe=p+(K+1)+ne*se;c.push(ae,pe,fe),c.push(pe,be,fe),ue+=6}l.addGroup(f,ue,k),f+=ue,p+=J}}copy(e){return super.copy(e),this.parameters=Object.assign({},e.parameters),this}static fromJSON(e){return new eZ(e.width,e.height,e.depth,e.widthSegments,e.heightSegments,e.depthSegments)}};function ny(t){const e={};for(const n in t){e[n]={};for(const r in t[n]){const i=t[n][r];i&&(i.isColor||i.isMatrix3||i.isMatrix4||i.isVector2||i.isVector3||i.isVector4||i.isTexture||i.isQuaternion)?i.isRenderTargetTexture?(Hn("UniformsUtils: Textures of render targets cannot be cloned via cloneUniforms() or mergeUniforms()."),e[n][r]=null):e[n][r]=i.clone():Array.isArray(i)?e[n][r]=i.slice():e[n][r]=i}}return e}function no(t){const e={};for(let n=0;n<t.length;n++){const r=ny(t[n]);for(const i in r)e[i]=r[i]}return e}function j0e(t){const e=[];for(let n=0;n<t.length;n++)e.push(t[n].clone());return e}function tZ(t){const e=t.getRenderTarget();return e===null?t.outputColorSpace:e.isXRRenderTarget===!0?e.texture.colorSpace:Fr.workingColorSpace}const M0e={clone:ny,merge:no};var E0e=`void main() {
+Please change the parent <Route path="${S}"> to <Route path="${S==="/"?"*":`${S}/*`}">.`)}let p=Qc(),f;if(e){let S=typeof e=="string"?_y(e):e;Ea(u==="/"||S.pathname?.startsWith(u),`When overriding the location using \`<Routes location>\` or \`useRoutes(routes, location)\`, the location pathname must begin with the portion of the URL pathname that was matched by all parent routes. The current pathname base is "${u}" but pathname "${S.pathname}" was given in the \`location\` prop.`),f=S}else f=p;let x=f.pathname||"/",v=x;if(u!=="/"){let S=u.replace(/^\//,"").split("/");v="/"+x.replace(/^\//,"").split("/").slice(S.length).join("/")}let b=wQ(t,{pathname:v});oc(m||b!=null,`No routes matched location "${f.pathname}${f.search}${f.hash}" `),oc(b==null||b[b.length-1].route.element!==void 0||b[b.length-1].route.Component!==void 0||b[b.length-1].route.lazy!==void 0,`Matched leaf route at location "${f.pathname}${f.search}${f.hash}" does not have an element or Component. This means it will render an <Outlet /> with a null value by default resulting in an "empty" page.`);let g=ghe(b&&b.map(S=>Object.assign({},S,{params:Object.assign({},c,S.params),pathname:om([u,s.encodeLocation?s.encodeLocation(S.pathname.replace(/\?/g,"%3F").replace(/#/g,"%23")).pathname:S.pathname]),pathnameBase:S.pathnameBase==="/"?u:om([u,s.encodeLocation?s.encodeLocation(S.pathnameBase.replace(/\?/g,"%3F").replace(/#/g,"%23")).pathname:S.pathnameBase])})),o,n,r,i);return e&&g?w.createElement(eS.Provider,{value:{location:{pathname:"/",search:"",hash:"",state:null,key:"default",...f},navigationType:"POP"}},g):g}function mhe(){let t=whe(),e=Jme(t)?`${t.status} ${t.statusText}`:t instanceof Error?t.message:JSON.stringify(t),n=t instanceof Error?t.stack:null,r="rgba(200,200,200, 0.5)",i={padding:"0.5rem",backgroundColor:r},s={padding:"2px 4px",backgroundColor:r},o=null;return console.error("Error handled by React Router default ErrorBoundary:",t),o=w.createElement(w.Fragment,null,w.createElement("p",null,"💿 Hey developer 👋"),w.createElement("p",null,"You can provide a way better UX than this when your app throws errors by providing your own ",w.createElement("code",{style:s},"ErrorBoundary")," or"," ",w.createElement("code",{style:s},"errorElement")," prop on your route.")),w.createElement(w.Fragment,null,w.createElement("h2",null,"Unexpected Application Error!"),w.createElement("h3",{style:{fontStyle:"italic"}},e),n?w.createElement("pre",{style:i},n):null,o)}var hhe=w.createElement(mhe,null),DQ=class extends w.Component{constructor(t){super(t),this.state={location:t.location,revalidation:t.revalidation,error:t.error}}static getDerivedStateFromError(t){return{error:t}}static getDerivedStateFromProps(t,e){return e.location!==t.location||e.revalidation!=="idle"&&t.revalidation==="idle"?{error:t.error,location:t.location,revalidation:t.revalidation}:{error:t.error!==void 0?t.error:e.error,location:e.location,revalidation:t.revalidation||e.revalidation}}componentDidCatch(t,e){this.props.onError?this.props.onError(t,e):console.error("React Router caught the following error during render",t)}render(){let t=this.state.error;if(this.context&&typeof t=="object"&&t&&"digest"in t&&typeof t.digest=="string"){const n=ohe(t.digest);n&&(t=n)}let e=t!==void 0?w.createElement(bc.Provider,{value:this.props.routeContext},w.createElement(FI.Provider,{value:t,children:this.props.component})):this.props.children;return this.context?w.createElement(phe,{error:t},e):e}};DQ.contextType=the;var RM=new WeakMap;function phe({children:t,error:e}){let{basename:n}=w.useContext(xl);if(typeof e=="object"&&e&&"digest"in e&&typeof e.digest=="string"){let r=she(e.digest);if(r){let i=RM.get(e);if(i)throw i;let s=NQ(r.location,n);if(kQ&&!RM.get(e))if(s.isExternal||r.reloadDocument)window.location.href=s.absoluteURL||s.to;else{const o=Promise.resolve().then(()=>window.__reactRouterDataRouter.navigate(s.to,{replace:r.replace}));throw RM.set(e,o),o}return w.createElement("meta",{httpEquiv:"refresh",content:`0;url=${s.absoluteURL||s.to}`})}}return t}function fhe({routeContext:t,match:e,children:n}){let r=w.useContext(ky);return r&&r.static&&r.staticContext&&(e.route.errorElement||e.route.ErrorBoundary)&&(r.staticContext._deepestRenderedBoundaryId=e.route.id),w.createElement(bc.Provider,{value:t},n)}function ghe(t,e=[],n=null,r=null,i=null){if(t==null){if(!n)return null;if(n.errors)t=n.matches;else if(e.length===0&&!n.initialized&&n.matches.length>0)t=n.matches;else return null}let s=t,o=n?.errors;if(o!=null){let u=s.findIndex(m=>m.route.id&&o?.[m.route.id]!==void 0);Ea(u>=0,`Could not find a matching route for errors on route IDs: ${Object.keys(o).join(",")}`),s=s.slice(0,Math.min(s.length,u+1))}let l=!1,c=-1;if(n)for(let u=0;u<s.length;u++){let m=s[u];if((m.route.HydrateFallback||m.route.hydrateFallbackElement)&&(c=u),m.route.id){let{loaderData:p,errors:f}=n,x=m.route.loader&&!p.hasOwnProperty(m.route.id)&&(!f||f[m.route.id]===void 0);if(m.route.lazy||x){l=!0,c>=0?s=s.slice(0,c+1):s=[s[0]];break}}}let d=n&&r?(u,m)=>{r(u,{location:n.location,params:n.matches?.[0]?.params??{},unstable_pattern:Zme(n.matches),errorInfo:m})}:void 0;return s.reduceRight((u,m,p)=>{let f,x=!1,v=null,b=null;n&&(f=o&&m.route.id?o[m.route.id]:void 0,v=m.route.errorElement||hhe,l&&(c<0&&p===0?(FQ("route-fallback",!1,"No `HydrateFallback` element provided to render during initial hydration"),x=!0,b=null):c===p&&(x=!0,b=m.route.hydrateFallbackElement||null)));let g=e.concat(s.slice(0,p+1)),S=()=>{let N;return f?N=v:x?N=b:m.route.Component?N=w.createElement(m.route.Component,null):m.route.element?N=m.route.element:N=u,w.createElement(fhe,{match:m,routeContext:{outlet:u,matches:g,isDataRoute:n!=null},children:N})};return n&&(m.route.ErrorBoundary||m.route.errorElement||p===0)?w.createElement(DQ,{location:n.location,revalidation:n.revalidation,component:v,error:f,children:S(),routeContext:{outlet:null,matches:g,isDataRoute:!0},onError:d}):S()},null)}function RI(t){return`${t} must be used within a data router.  See https://reactrouter.com/en/main/routers/picking-a-router.`}function bhe(t){let e=w.useContext(ky);return Ea(e,RI(t)),e}function xhe(t){let e=w.useContext(XP);return Ea(e,RI(t)),e}function yhe(t){let e=w.useContext(bc);return Ea(e,RI(t)),e}function LI(t){let e=yhe(t),n=e.matches[e.matches.length-1];return Ea(n.route.id,`${t} can only be used on routes that contain a unique "id"`),n.route.id}function vhe(){return LI("useRouteId")}function whe(){let t=w.useContext(FI),e=xhe("useRouteError"),n=LI("useRouteError");return t!==void 0?t:e.errors?.[n]}function She(){let{router:t}=bhe("useNavigate"),e=LI("useNavigate"),n=w.useRef(!1);return jQ(()=>{n.current=!0}),w.useCallback(async(i,s={})=>{oc(n.current,AQ),n.current&&(typeof i=="number"?await t.navigate(i):await t.navigate(i,{fromRouteId:e,...s}))},[t,e])}var MH={};function FQ(t,e,n){!e&&!MH[t]&&(MH[t]=!0,oc(!1,n))}w.memo(_he);function _he({routes:t,future:e,state:n,onError:r}){return EQ(t,void 0,n,r,e)}function Jf({to:t,replace:e,state:n,relative:r}){Ea(Ny(),"<Navigate> may be used only in the context of a <Router> component.");let{static:i}=w.useContext(xl);oc(!i,"<Navigate> must not be used on the initial render in a <StaticRouter>. This is a no-op, but you should modify your code so the <Navigate> is only ever rendered in response to some user interaction or state change.");let{matches:s}=w.useContext(bc),{pathname:o}=Qc(),l=as(),c=DI(t,EI(s),o,r==="path"),d=JSON.stringify(c);return w.useEffect(()=>{l(JSON.parse(d),{replace:e,state:n,relative:r})},[l,d,r,e,n]),null}function RQ(t){return dhe(t.context)}function _r(t){Ea(!1,"A <Route> is only ever to be used as the child of <Routes> element, never rendered directly. Please wrap your <Route> in a <Routes>.")}function khe({basename:t="/",children:e=null,location:n,navigationType:r="POP",navigator:i,static:s=!1,unstable_useTransitions:o}){Ea(!Ny(),"You cannot render a <Router> inside another <Router>. You should never have more than one in your app.");let l=t.replace(/^\/*/,"/"),c=w.useMemo(()=>({basename:l,navigator:i,static:s,unstable_useTransitions:o,future:{}}),[l,i,s,o]);typeof n=="string"&&(n=_y(n));let{pathname:d="/",search:u="",hash:m="",state:p=null,key:f="default"}=n,x=w.useMemo(()=>{let v=bm(d,l);return v==null?null:{location:{pathname:v,search:u,hash:m,state:p,key:f},navigationType:r}},[l,d,u,m,p,f,r]);return oc(x!=null,`<Router basename="${l}"> is not able to match the URL "${d}${u}${m}" because it does not start with the basename, so the <Router> won't render anything.`),x==null?null:w.createElement(xl.Provider,{value:c},w.createElement(eS.Provider,{children:e,value:x}))}function Nhe({children:t,location:e}){return uhe(oF(t),e)}function oF(t,e=[]){let n=[];return w.Children.forEach(t,(r,i)=>{if(!w.isValidElement(r))return;let s=[...e,i];if(r.type===w.Fragment){n.push.apply(n,oF(r.props.children,s));return}Ea(r.type===_r,`[${typeof r.type=="string"?r.type:r.type.name}] is not a <Route> component. All component children of <Routes> must be a <Route> or <React.Fragment>`),Ea(!r.props.index||!r.props.children,"An index route cannot have child routes.");let o={id:r.props.id||s.join("-"),caseSensitive:r.props.caseSensitive,element:r.props.element,Component:r.props.Component,index:r.props.index,path:r.props.path,middleware:r.props.middleware,loader:r.props.loader,action:r.props.action,hydrateFallbackElement:r.props.hydrateFallbackElement,HydrateFallback:r.props.HydrateFallback,errorElement:r.props.errorElement,ErrorBoundary:r.props.ErrorBoundary,hasErrorBoundary:r.props.hasErrorBoundary===!0||r.props.ErrorBoundary!=null||r.props.errorElement!=null,shouldRevalidate:r.props.shouldRevalidate,handle:r.props.handle,lazy:r.props.lazy};r.props.children&&(o.children=oF(r.props.children,s)),n.push(o)}),n}var $k="get",Vk="application/x-www-form-urlencoded";function YP(t){return typeof HTMLElement<"u"&&t instanceof HTMLElement}function Che(t){return YP(t)&&t.tagName.toLowerCase()==="button"}function Phe(t){return YP(t)&&t.tagName.toLowerCase()==="form"}function The(t){return YP(t)&&t.tagName.toLowerCase()==="input"}function Ahe(t){return!!(t.metaKey||t.altKey||t.ctrlKey||t.shiftKey)}function jhe(t,e){return t.button===0&&(!e||e==="_self")&&!Ahe(t)}function lF(t=""){return new URLSearchParams(typeof t=="string"||Array.isArray(t)||t instanceof URLSearchParams?t:Object.keys(t).reduce((e,n)=>{let r=t[n];return e.concat(Array.isArray(r)?r.map(i=>[n,i]):[[n,r]])},[]))}function Mhe(t,e){let n=lF(t);return e&&e.forEach((r,i)=>{n.has(i)||e.getAll(i).forEach(s=>{n.append(i,s)})}),n}var t1=null;function Ehe(){if(t1===null)try{new FormData(document.createElement("form"),0),t1=!1}catch{t1=!0}return t1}var Dhe=new Set(["application/x-www-form-urlencoded","multipart/form-data","text/plain"]);function LM(t){return t!=null&&!Dhe.has(t)?(oc(!1,`"${t}" is not a valid \`encType\` for \`<Form>\`/\`<fetcher.Form>\` and will default to "${Vk}"`),null):t}function Fhe(t,e){let n,r,i,s,o;if(Phe(t)){let l=t.getAttribute("action");r=l?bm(l,e):null,n=t.getAttribute("method")||$k,i=LM(t.getAttribute("enctype"))||Vk,s=new FormData(t)}else if(Che(t)||The(t)&&(t.type==="submit"||t.type==="image")){let l=t.form;if(l==null)throw new Error('Cannot submit a <button> or <input type="submit"> without a <form>');let c=t.getAttribute("formaction")||l.getAttribute("action");if(r=c?bm(c,e):null,n=t.getAttribute("formmethod")||l.getAttribute("method")||$k,i=LM(t.getAttribute("formenctype"))||LM(l.getAttribute("enctype"))||Vk,s=new FormData(l,t),!Ehe()){let{name:d,type:u,value:m}=t;if(u==="image"){let p=d?`${d}.`:"";s.append(`${p}x`,"0"),s.append(`${p}y`,"0")}else d&&s.append(d,m)}}else{if(YP(t))throw new Error('Cannot submit element that is not <form>, <button>, or <input type="submit|image">');n=$k,r=null,i=Vk,o=t}return s&&i==="text/plain"&&(o=s,s=void 0),{action:r,method:n.toLowerCase(),encType:i,formData:s,body:o}}Object.getOwnPropertyNames(Object.prototype).sort().join("\0");function II(t,e){if(t===!1||t===null||typeof t>"u")throw new Error(e)}function Rhe(t,e,n,r){let i=typeof t=="string"?new URL(t,typeof window>"u"?"server://singlefetch/":window.location.origin):t;return n?i.pathname.endsWith("/")?i.pathname=`${i.pathname}_.${r}`:i.pathname=`${i.pathname}.${r}`:i.pathname==="/"?i.pathname=`_root.${r}`:e&&bm(i.pathname,e)==="/"?i.pathname=`${e.replace(/\/$/,"")}/_root.${r}`:i.pathname=`${i.pathname.replace(/\/$/,"")}.${r}`,i}async function Lhe(t,e){if(t.id in e)return e[t.id];try{let n=await import(t.module);return e[t.id]=n,n}catch(n){return console.error(`Error loading route module \`${t.module}\`, reloading page...`),console.error(n),window.__reactRouterContext&&window.__reactRouterContext.isSpaMode,window.location.reload(),new Promise(()=>{})}}function Ihe(t){return t==null?!1:t.href==null?t.rel==="preload"&&typeof t.imageSrcSet=="string"&&typeof t.imageSizes=="string":typeof t.rel=="string"&&typeof t.href=="string"}async function Ohe(t,e,n){let r=await Promise.all(t.map(async i=>{let s=e.routes[i.route.id];if(s){let o=await Lhe(s,n);return o.links?o.links():[]}return[]}));return Hhe(r.flat(1).filter(Ihe).filter(i=>i.rel==="stylesheet"||i.rel==="preload").map(i=>i.rel==="stylesheet"?{...i,rel:"prefetch",as:"style"}:{...i,rel:"prefetch"}))}function EH(t,e,n,r,i,s){let o=(c,d)=>n[d]?c.route.id!==n[d].route.id:!0,l=(c,d)=>n[d].pathname!==c.pathname||n[d].route.path?.endsWith("*")&&n[d].params["*"]!==c.params["*"];return s==="assets"?e.filter((c,d)=>o(c,d)||l(c,d)):s==="data"?e.filter((c,d)=>{let u=r.routes[c.route.id];if(!u||!u.hasLoader)return!1;if(o(c,d)||l(c,d))return!0;if(c.route.shouldRevalidate){let m=c.route.shouldRevalidate({currentUrl:new URL(i.pathname+i.search+i.hash,window.origin),currentParams:n[0]?.params||{},nextUrl:new URL(t,window.origin),nextParams:c.params,defaultShouldRevalidate:!0});if(typeof m=="boolean")return m}return!0}):[]}function zhe(t,e,{includeHydrateFallback:n}={}){return Uhe(t.map(r=>{let i=e.routes[r.route.id];if(!i)return[];let s=[i.module];return i.clientActionModule&&(s=s.concat(i.clientActionModule)),i.clientLoaderModule&&(s=s.concat(i.clientLoaderModule)),n&&i.hydrateFallbackModule&&(s=s.concat(i.hydrateFallbackModule)),i.imports&&(s=s.concat(i.imports)),s}).flat(1))}function Uhe(t){return[...new Set(t)]}function Bhe(t){let e={},n=Object.keys(t).sort();for(let r of n)e[r]=t[r];return e}function Hhe(t,e){let n=new Set;return new Set(e),t.reduce((r,i)=>{let s=JSON.stringify(Bhe(i));return n.has(s)||(n.add(s),r.push({key:s,link:i})),r},[])}function LQ(){let t=w.useContext(ky);return II(t,"You must render this element inside a <DataRouterContext.Provider> element"),t}function qhe(){let t=w.useContext(XP);return II(t,"You must render this element inside a <DataRouterStateContext.Provider> element"),t}var OI=w.createContext(void 0);OI.displayName="FrameworkContext";function IQ(){let t=w.useContext(OI);return II(t,"You must render this element inside a <HydratedRouter> element"),t}function $he(t,e){let n=w.useContext(OI),[r,i]=w.useState(!1),[s,o]=w.useState(!1),{onFocus:l,onBlur:c,onMouseEnter:d,onMouseLeave:u,onTouchStart:m}=e,p=w.useRef(null);w.useEffect(()=>{if(t==="render"&&o(!0),t==="viewport"){let v=g=>{g.forEach(S=>{o(S.isIntersecting)})},b=new IntersectionObserver(v,{threshold:.5});return p.current&&b.observe(p.current),()=>{b.disconnect()}}},[t]),w.useEffect(()=>{if(r){let v=setTimeout(()=>{o(!0)},100);return()=>{clearTimeout(v)}}},[r]);let f=()=>{i(!0)},x=()=>{i(!1),o(!1)};return n?t!=="intent"?[s,p,{}]:[s,p,{onFocus:Rv(l,f),onBlur:Rv(c,x),onMouseEnter:Rv(d,f),onMouseLeave:Rv(u,x),onTouchStart:Rv(m,f)}]:[!1,p,{}]}function Rv(t,e){return n=>{t&&t(n),n.defaultPrevented||e(n)}}function Vhe({page:t,...e}){let{router:n}=LQ(),r=w.useMemo(()=>wQ(n.routes,t,n.basename),[n.routes,t,n.basename]);return r?w.createElement(Whe,{page:t,matches:r,...e}):null}function Ghe(t){let{manifest:e,routeModules:n}=IQ(),[r,i]=w.useState([]);return w.useEffect(()=>{let s=!1;return Ohe(t,e,n).then(o=>{s||i(o)}),()=>{s=!0}},[t,e,n]),r}function Whe({page:t,matches:e,...n}){let r=Qc(),{future:i,manifest:s,routeModules:o}=IQ(),{basename:l}=LQ(),{loaderData:c,matches:d}=qhe(),u=w.useMemo(()=>EH(t,e,d,s,r,"data"),[t,e,d,s,r]),m=w.useMemo(()=>EH(t,e,d,s,r,"assets"),[t,e,d,s,r]),p=w.useMemo(()=>{if(t===r.pathname+r.search+r.hash)return[];let v=new Set,b=!1;if(e.forEach(S=>{let N=s.routes[S.route.id];!N||!N.hasLoader||(!u.some(P=>P.route.id===S.route.id)&&S.route.id in c&&o[S.route.id]?.shouldRevalidate||N.hasClientLoader?b=!0:v.add(S.route.id))}),v.size===0)return[];let g=Rhe(t,l,i.unstable_trailingSlashAwareDataRequests,"data");return b&&v.size>0&&g.searchParams.set("_routes",e.filter(S=>v.has(S.route.id)).map(S=>S.route.id).join(",")),[g.pathname+g.search]},[l,i.unstable_trailingSlashAwareDataRequests,c,r,s,u,e,t,o]),f=w.useMemo(()=>zhe(m,s),[m,s]),x=Ghe(m);return w.createElement(w.Fragment,null,p.map(v=>w.createElement("link",{key:v,rel:"prefetch",as:"fetch",href:v,...n})),f.map(v=>w.createElement("link",{key:v,rel:"modulepreload",href:v,...n})),x.map(({key:v,link:b})=>w.createElement("link",{key:v,nonce:n.nonce,...b,crossOrigin:b.crossOrigin??n.crossOrigin})))}function Khe(...t){return e=>{t.forEach(n=>{typeof n=="function"?n(e):n!=null&&(n.current=e)})}}var Xhe=typeof window<"u"&&typeof window.document<"u"&&typeof window.document.createElement<"u";try{Xhe&&(window.__reactRouterVersion="7.13.0")}catch{}function Yhe({basename:t,children:e,unstable_useTransitions:n,window:r}){let i=w.useRef();i.current==null&&(i.current=Tme({window:r,v5Compat:!0}));let s=i.current,[o,l]=w.useState({action:s.action,location:s.location}),c=w.useCallback(d=>{n===!1?l(d):w.startTransition(()=>l(d))},[n]);return w.useLayoutEffect(()=>s.listen(c),[s,c]),w.createElement(khe,{basename:t,children:e,location:o.location,navigationType:o.action,navigator:s,unstable_useTransitions:n})}var OQ=/^(?:[a-z][a-z0-9+.-]*:|\/\/)/i,ws=w.forwardRef(function({onClick:e,discover:n="render",prefetch:r="none",relative:i,reloadDocument:s,replace:o,state:l,target:c,to:d,preventScrollReset:u,viewTransition:m,unstable_defaultShouldRevalidate:p,...f},x){let{basename:v,unstable_useTransitions:b}=w.useContext(xl),g=typeof d=="string"&&OQ.test(d),S=NQ(d,v);d=S.to;let N=lhe(d,{relative:i}),[P,C,A]=$he(r,f),T=Zhe(d,{replace:o,state:l,target:c,preventScrollReset:u,relative:i,viewTransition:m,unstable_defaultShouldRevalidate:p,unstable_useTransitions:b});function F(E){e&&e(E),E.defaultPrevented||T(E)}let k=w.createElement("a",{...f,...A,href:S.absoluteURL||N,onClick:S.isExternal||s?e:F,ref:Khe(x,C),target:c,"data-discover":!g&&n==="render"?"true":void 0});return P&&!g?w.createElement(w.Fragment,null,k,w.createElement(Vhe,{page:N})):k});ws.displayName="Link";var Px=w.forwardRef(function({"aria-current":e="page",caseSensitive:n=!1,className:r="",end:i=!1,style:s,to:o,viewTransition:l,children:c,...d},u){let m=nS(o,{relative:d.relative}),p=Qc(),f=w.useContext(XP),{navigator:x,basename:v}=w.useContext(xl),b=f!=null&&ape(m)&&l===!0,g=x.encodeLocation?x.encodeLocation(m).pathname:m.pathname,S=p.pathname,N=f&&f.navigation&&f.navigation.location?f.navigation.location.pathname:null;n||(S=S.toLowerCase(),N=N?N.toLowerCase():null,g=g.toLowerCase()),N&&v&&(N=bm(N,v)||N);const P=g!=="/"&&g.endsWith("/")?g.length-1:g.length;let C=S===g||!i&&S.startsWith(g)&&S.charAt(P)==="/",A=N!=null&&(N===g||!i&&N.startsWith(g)&&N.charAt(g.length)==="/"),T={isActive:C,isPending:A,isTransitioning:b},F=C?e:void 0,k;typeof r=="function"?k=r(T):k=[r,C?"active":null,A?"pending":null,b?"transitioning":null].filter(Boolean).join(" ");let E=typeof s=="function"?s(T):s;return w.createElement(ws,{...d,"aria-current":F,className:k,ref:u,style:E,to:o,viewTransition:l},typeof c=="function"?c(T):c)});Px.displayName="NavLink";var Qhe=w.forwardRef(({discover:t="render",fetcherKey:e,navigate:n,reloadDocument:r,replace:i,state:s,method:o=$k,action:l,onSubmit:c,relative:d,preventScrollReset:u,viewTransition:m,unstable_defaultShouldRevalidate:p,...f},x)=>{let{unstable_useTransitions:v}=w.useContext(xl),b=npe(),g=rpe(l,{relative:d}),S=o.toLowerCase()==="get"?"get":"post",N=typeof l=="string"&&OQ.test(l),P=C=>{if(c&&c(C),C.defaultPrevented)return;C.preventDefault();let A=C.nativeEvent.submitter,T=A?.getAttribute("formmethod")||o,F=()=>b(A||C.currentTarget,{fetcherKey:e,method:T,navigate:n,replace:i,state:s,relative:d,preventScrollReset:u,viewTransition:m,unstable_defaultShouldRevalidate:p});v&&n!==!1?w.startTransition(()=>F()):F()};return w.createElement("form",{ref:x,method:S,action:g,onSubmit:r?c:P,...f,"data-discover":!N&&t==="render"?"true":void 0})});Qhe.displayName="Form";function Jhe(t){return`${t} must be used within a data router.  See https://reactrouter.com/en/main/routers/picking-a-router.`}function zQ(t){let e=w.useContext(ky);return Ea(e,Jhe(t)),e}function Zhe(t,{target:e,replace:n,state:r,preventScrollReset:i,relative:s,viewTransition:o,unstable_defaultShouldRevalidate:l,unstable_useTransitions:c}={}){let d=as(),u=Qc(),m=nS(t,{relative:s});return w.useCallback(p=>{if(jhe(p,e)){p.preventDefault();let f=n!==void 0?n:sw(u)===sw(m),x=()=>d(t,{replace:f,state:r,preventScrollReset:i,relative:s,viewTransition:o,unstable_defaultShouldRevalidate:l});c?w.startTransition(()=>x()):x()}},[u,d,m,n,r,e,t,i,s,o,l,c])}function rS(t){oc(typeof URLSearchParams<"u","You cannot use the `useSearchParams` hook in a browser that does not support the URLSearchParams API. If you need to support Internet Explorer 11, we recommend you load a polyfill such as https://github.com/ungap/url-search-params.");let e=w.useRef(lF(t)),n=w.useRef(!1),r=Qc(),i=w.useMemo(()=>Mhe(r.search,n.current?null:e.current),[r.search]),s=as(),o=w.useCallback((l,c)=>{const d=lF(typeof l=="function"?l(new URLSearchParams(i)):l);n.current=!0,s("?"+d,c)},[s,i]);return[i,o]}var epe=0,tpe=()=>`__${String(++epe)}__`;function npe(){let{router:t}=zQ("useSubmit"),{basename:e}=w.useContext(xl),n=vhe(),r=t.fetch,i=t.navigate;return w.useCallback(async(s,o={})=>{let{action:l,method:c,encType:d,formData:u,body:m}=Fhe(s,e);if(o.navigate===!1){let p=o.fetcherKey||tpe();await r(p,n,o.action||l,{unstable_defaultShouldRevalidate:o.unstable_defaultShouldRevalidate,preventScrollReset:o.preventScrollReset,formData:u,body:m,formMethod:o.method||c,formEncType:o.encType||d,flushSync:o.flushSync})}else await i(o.action||l,{unstable_defaultShouldRevalidate:o.unstable_defaultShouldRevalidate,preventScrollReset:o.preventScrollReset,formData:u,body:m,formMethod:o.method||c,formEncType:o.encType||d,replace:o.replace,state:o.state,fromRouteId:n,flushSync:o.flushSync,viewTransition:o.viewTransition})},[r,i,e,n])}function rpe(t,{relative:e}={}){let{basename:n}=w.useContext(xl),r=w.useContext(bc);Ea(r,"useFormAction must be used inside a RouteContext");let[i]=r.matches.slice(-1),s={...nS(t||".",{relative:e})},o=Qc();if(t==null){s.search=o.search;let l=new URLSearchParams(s.search),c=l.getAll("index");if(c.some(u=>u==="")){l.delete("index"),c.filter(m=>m).forEach(m=>l.append("index",m));let u=l.toString();s.search=u?`?${u}`:""}}return(!t||t===".")&&i.route.index&&(s.search=s.search?s.search.replace(/^\?/,"?index&"):"?index"),n!=="/"&&(s.pathname=s.pathname==="/"?n:om([n,s.pathname])),sw(s)}function ape(t,{relative:e}={}){let n=w.useContext(PQ);Ea(n!=null,"`useViewTransitionState` must be used within `react-router-dom`'s `RouterProvider`.  Did you accidentally import `RouterProvider` from `react-router`?");let{basename:r}=zQ("useViewTransitionState"),i=nS(t,{relative:e});if(!n.isTransitioning)return!1;let s=bm(n.currentLocation.pathname,r)||n.currentLocation.pathname,o=bm(n.nextLocation.pathname,r)||n.nextLocation.pathname;return SN(i.pathname,o)!=null||SN(i.pathname,s)!=null}var Qu=dQ();const ipe=gc(Qu);var Hg=class{constructor(){this.listeners=new Set,this.subscribe=this.subscribe.bind(this)}subscribe(t){return this.listeners.add(t),this.onSubscribe(),()=>{this.listeners.delete(t),this.onUnsubscribe()}}hasListeners(){return this.listeners.size>0}onSubscribe(){}onUnsubscribe(){}},spe={setTimeout:(t,e)=>setTimeout(t,e),clearTimeout:t=>clearTimeout(t),setInterval:(t,e)=>setInterval(t,e),clearInterval:t=>clearInterval(t)},ope=class{#t=spe;#e=!1;setTimeoutProvider(t){this.#t=t}setTimeout(t,e){return this.#t.setTimeout(t,e)}clearTimeout(t){this.#t.clearTimeout(t)}setInterval(t,e){return this.#t.setInterval(t,e)}clearInterval(t){this.#t.clearInterval(t)}},zf=new ope;function lpe(t){setTimeout(t,0)}var mg=typeof window>"u"||"Deno"in globalThis;function Bs(){}function cpe(t,e){return typeof t=="function"?t(e):t}function cF(t){return typeof t=="number"&&t>=0&&t!==1/0}function UQ(t,e){return Math.max(t+(e||0)-Date.now(),0)}function rp(t,e){return typeof t=="function"?t(e):t}function $l(t,e){return typeof t=="function"?t(e):t}function DH(t,e){const{type:n="all",exact:r,fetchStatus:i,predicate:s,queryKey:o,stale:l}=t;if(o){if(r){if(e.queryHash!==zI(o,e.options))return!1}else if(!ow(e.queryKey,o))return!1}if(n!=="all"){const c=e.isActive();if(n==="active"&&!c||n==="inactive"&&c)return!1}return!(typeof l=="boolean"&&e.isStale()!==l||i&&i!==e.state.fetchStatus||s&&!s(e))}function FH(t,e){const{exact:n,status:r,predicate:i,mutationKey:s}=t;if(s){if(!e.options.mutationKey)return!1;if(n){if(hg(e.options.mutationKey)!==hg(s))return!1}else if(!ow(e.options.mutationKey,s))return!1}return!(r&&e.state.status!==r||i&&!i(e))}function zI(t,e){return(e?.queryKeyHashFn||hg)(t)}function hg(t){return JSON.stringify(t,(e,n)=>dF(n)?Object.keys(n).sort().reduce((r,i)=>(r[i]=n[i],r),{}):n)}function ow(t,e){return t===e?!0:typeof t!=typeof e?!1:t&&e&&typeof t=="object"&&typeof e=="object"?Object.keys(e).every(n=>ow(t[n],e[n])):!1}var dpe=Object.prototype.hasOwnProperty;function UI(t,e,n=0){if(t===e)return t;if(n>500)return e;const r=RH(t)&&RH(e);if(!r&&!(dF(t)&&dF(e)))return e;const s=(r?t:Object.keys(t)).length,o=r?e:Object.keys(e),l=o.length,c=r?new Array(l):{};let d=0;for(let u=0;u<l;u++){const m=r?u:o[u],p=t[m],f=e[m];if(p===f){c[m]=p,(r?u<s:dpe.call(t,m))&&d++;continue}if(p===null||f===null||typeof p!="object"||typeof f!="object"){c[m]=f;continue}const x=UI(p,f,n+1);c[m]=x,x===p&&d++}return s===l&&d===s?t:c}function lw(t,e){if(!e||Object.keys(t).length!==Object.keys(e).length)return!1;for(const n in t)if(t[n]!==e[n])return!1;return!0}function RH(t){return Array.isArray(t)&&t.length===Object.keys(t).length}function dF(t){if(!LH(t))return!1;const e=t.constructor;if(e===void 0)return!0;const n=e.prototype;return!(!LH(n)||!n.hasOwnProperty("isPrototypeOf")||Object.getPrototypeOf(t)!==Object.prototype)}function LH(t){return Object.prototype.toString.call(t)==="[object Object]"}function upe(t){return new Promise(e=>{zf.setTimeout(e,t)})}function uF(t,e,n){return typeof n.structuralSharing=="function"?n.structuralSharing(t,e):n.structuralSharing!==!1?UI(t,e):e}function mpe(t,e,n=0){const r=[...t,e];return n&&r.length>n?r.slice(1):r}function hpe(t,e,n=0){const r=[e,...t];return n&&r.length>n?r.slice(0,-1):r}var BI=Symbol();function BQ(t,e){return!t.queryFn&&e?.initialPromise?()=>e.initialPromise:!t.queryFn||t.queryFn===BI?()=>Promise.reject(new Error(`Missing queryFn: '${t.queryHash}'`)):t.queryFn}function HI(t,e){return typeof t=="function"?t(...e):!!t}function ppe(t,e,n){let r=!1,i;return Object.defineProperty(t,"signal",{enumerable:!0,get:()=>(i??=e(),r||(r=!0,i.aborted?n():i.addEventListener("abort",n,{once:!0})),i)}),t}var fpe=class extends Hg{#t;#e;#n;constructor(){super(),this.#n=t=>{if(!mg&&window.addEventListener){const e=()=>t();return window.addEventListener("visibilitychange",e,!1),()=>{window.removeEventListener("visibilitychange",e)}}}}onSubscribe(){this.#e||this.setEventListener(this.#n)}onUnsubscribe(){this.hasListeners()||(this.#e?.(),this.#e=void 0)}setEventListener(t){this.#n=t,this.#e?.(),this.#e=t(e=>{typeof e=="boolean"?this.setFocused(e):this.onFocus()})}setFocused(t){this.#t!==t&&(this.#t=t,this.onFocus())}onFocus(){const t=this.isFocused();this.listeners.forEach(e=>{e(t)})}isFocused(){return typeof this.#t=="boolean"?this.#t:globalThis.document?.visibilityState!=="hidden"}},qI=new fpe;function mF(){let t,e;const n=new Promise((i,s)=>{t=i,e=s});n.status="pending",n.catch(()=>{});function r(i){Object.assign(n,i),delete n.resolve,delete n.reject}return n.resolve=i=>{r({status:"fulfilled",value:i}),t(i)},n.reject=i=>{r({status:"rejected",reason:i}),e(i)},n}var gpe=lpe;function bpe(){let t=[],e=0,n=l=>{l()},r=l=>{l()},i=gpe;const s=l=>{e?t.push(l):i(()=>{n(l)})},o=()=>{const l=t;t=[],l.length&&i(()=>{r(()=>{l.forEach(c=>{n(c)})})})};return{batch:l=>{let c;e++;try{c=l()}finally{e--,e||o()}return c},batchCalls:l=>(...c)=>{s(()=>{l(...c)})},schedule:s,setNotifyFunction:l=>{n=l},setBatchNotifyFunction:l=>{r=l},setScheduler:l=>{i=l}}}var Qa=bpe(),xpe=class extends Hg{#t=!0;#e;#n;constructor(){super(),this.#n=t=>{if(!mg&&window.addEventListener){const e=()=>t(!0),n=()=>t(!1);return window.addEventListener("online",e,!1),window.addEventListener("offline",n,!1),()=>{window.removeEventListener("online",e),window.removeEventListener("offline",n)}}}}onSubscribe(){this.#e||this.setEventListener(this.#n)}onUnsubscribe(){this.hasListeners()||(this.#e?.(),this.#e=void 0)}setEventListener(t){this.#n=t,this.#e?.(),this.#e=t(this.setOnline.bind(this))}setOnline(t){this.#t!==t&&(this.#t=t,this.listeners.forEach(n=>{n(t)}))}isOnline(){return this.#t}},_N=new xpe;function ype(t){return Math.min(1e3*2**t,3e4)}function HQ(t){return(t??"online")==="online"?_N.isOnline():!0}var hF=class extends Error{constructor(t){super("CancelledError"),this.revert=t?.revert,this.silent=t?.silent}};function qQ(t){let e=!1,n=0,r;const i=mF(),s=()=>i.status!=="pending",o=v=>{if(!s()){const b=new hF(v);p(b),t.onCancel?.(b)}},l=()=>{e=!0},c=()=>{e=!1},d=()=>qI.isFocused()&&(t.networkMode==="always"||_N.isOnline())&&t.canRun(),u=()=>HQ(t.networkMode)&&t.canRun(),m=v=>{s()||(r?.(),i.resolve(v))},p=v=>{s()||(r?.(),i.reject(v))},f=()=>new Promise(v=>{r=b=>{(s()||d())&&v(b)},t.onPause?.()}).then(()=>{r=void 0,s()||t.onContinue?.()}),x=()=>{if(s())return;let v;const b=n===0?t.initialPromise:void 0;try{v=b??t.fn()}catch(g){v=Promise.reject(g)}Promise.resolve(v).then(m).catch(g=>{if(s())return;const S=t.retry??(mg?0:3),N=t.retryDelay??ype,P=typeof N=="function"?N(n,g):N,C=S===!0||typeof S=="number"&&n<S||typeof S=="function"&&S(n,g);if(e||!C){p(g);return}n++,t.onFail?.(n,g),upe(P).then(()=>d()?void 0:f()).then(()=>{e?p(g):x()})})};return{promise:i,status:()=>i.status,cancel:o,continue:()=>(r?.(),i),cancelRetry:l,continueRetry:c,canStart:u,start:()=>(u()?x():f().then(x),i)}}var $Q=class{#t;destroy(){this.clearGcTimeout()}scheduleGc(){this.clearGcTimeout(),cF(this.gcTime)&&(this.#t=zf.setTimeout(()=>{this.optionalRemove()},this.gcTime))}updateGcTime(t){this.gcTime=Math.max(this.gcTime||0,t??(mg?1/0:300*1e3))}clearGcTimeout(){this.#t&&(zf.clearTimeout(this.#t),this.#t=void 0)}},vpe=class extends $Q{#t;#e;#n;#a;#r;#i;#o;constructor(t){super(),this.#o=!1,this.#i=t.defaultOptions,this.setOptions(t.options),this.observers=[],this.#a=t.client,this.#n=this.#a.getQueryCache(),this.queryKey=t.queryKey,this.queryHash=t.queryHash,this.#t=OH(this.options),this.state=t.state??this.#t,this.scheduleGc()}get meta(){return this.options.meta}get promise(){return this.#r?.promise}setOptions(t){if(this.options={...this.#i,...t},this.updateGcTime(this.options.gcTime),this.state&&this.state.data===void 0){const e=OH(this.options);e.data!==void 0&&(this.setState(IH(e.data,e.dataUpdatedAt)),this.#t=e)}}optionalRemove(){!this.observers.length&&this.state.fetchStatus==="idle"&&this.#n.remove(this)}setData(t,e){const n=uF(this.state.data,t,this.options);return this.#s({data:n,type:"success",dataUpdatedAt:e?.updatedAt,manual:e?.manual}),n}setState(t,e){this.#s({type:"setState",state:t,setStateOptions:e})}cancel(t){const e=this.#r?.promise;return this.#r?.cancel(t),e?e.then(Bs).catch(Bs):Promise.resolve()}destroy(){super.destroy(),this.cancel({silent:!0})}reset(){this.destroy(),this.setState(this.#t)}isActive(){return this.observers.some(t=>$l(t.options.enabled,this)!==!1)}isDisabled(){return this.getObserversCount()>0?!this.isActive():this.options.queryFn===BI||this.state.dataUpdateCount+this.state.errorUpdateCount===0}isStatic(){return this.getObserversCount()>0?this.observers.some(t=>rp(t.options.staleTime,this)==="static"):!1}isStale(){return this.getObserversCount()>0?this.observers.some(t=>t.getCurrentResult().isStale):this.state.data===void 0||this.state.isInvalidated}isStaleByTime(t=0){return this.state.data===void 0?!0:t==="static"?!1:this.state.isInvalidated?!0:!UQ(this.state.dataUpdatedAt,t)}onFocus(){this.observers.find(e=>e.shouldFetchOnWindowFocus())?.refetch({cancelRefetch:!1}),this.#r?.continue()}onOnline(){this.observers.find(e=>e.shouldFetchOnReconnect())?.refetch({cancelRefetch:!1}),this.#r?.continue()}addObserver(t){this.observers.includes(t)||(this.observers.push(t),this.clearGcTimeout(),this.#n.notify({type:"observerAdded",query:this,observer:t}))}removeObserver(t){this.observers.includes(t)&&(this.observers=this.observers.filter(e=>e!==t),this.observers.length||(this.#r&&(this.#o?this.#r.cancel({revert:!0}):this.#r.cancelRetry()),this.scheduleGc()),this.#n.notify({type:"observerRemoved",query:this,observer:t}))}getObserversCount(){return this.observers.length}invalidate(){this.state.isInvalidated||this.#s({type:"invalidate"})}async fetch(t,e){if(this.state.fetchStatus!=="idle"&&this.#r?.status()!=="rejected"){if(this.state.data!==void 0&&e?.cancelRefetch)this.cancel({silent:!0});else if(this.#r)return this.#r.continueRetry(),this.#r.promise}if(t&&this.setOptions(t),!this.options.queryFn){const l=this.observers.find(c=>c.options.queryFn);l&&this.setOptions(l.options)}const n=new AbortController,r=l=>{Object.defineProperty(l,"signal",{enumerable:!0,get:()=>(this.#o=!0,n.signal)})},i=()=>{const l=BQ(this.options,e),d=(()=>{const u={client:this.#a,queryKey:this.queryKey,meta:this.meta};return r(u),u})();return this.#o=!1,this.options.persister?this.options.persister(l,d,this):l(d)},o=(()=>{const l={fetchOptions:e,options:this.options,queryKey:this.queryKey,client:this.#a,state:this.state,fetchFn:i};return r(l),l})();this.options.behavior?.onFetch(o,this),this.#e=this.state,(this.state.fetchStatus==="idle"||this.state.fetchMeta!==o.fetchOptions?.meta)&&this.#s({type:"fetch",meta:o.fetchOptions?.meta}),this.#r=qQ({initialPromise:e?.initialPromise,fn:o.fetchFn,onCancel:l=>{l instanceof hF&&l.revert&&this.setState({...this.#e,fetchStatus:"idle"}),n.abort()},onFail:(l,c)=>{this.#s({type:"failed",failureCount:l,error:c})},onPause:()=>{this.#s({type:"pause"})},onContinue:()=>{this.#s({type:"continue"})},retry:o.options.retry,retryDelay:o.options.retryDelay,networkMode:o.options.networkMode,canRun:()=>!0});try{const l=await this.#r.start();if(l===void 0)throw new Error(`${this.queryHash} data is undefined`);return this.setData(l),this.#n.config.onSuccess?.(l,this),this.#n.config.onSettled?.(l,this.state.error,this),l}catch(l){if(l instanceof hF){if(l.silent)return this.#r.promise;if(l.revert){if(this.state.data===void 0)throw l;return this.state.data}}throw this.#s({type:"error",error:l}),this.#n.config.onError?.(l,this),this.#n.config.onSettled?.(this.state.data,l,this),l}finally{this.scheduleGc()}}#s(t){const e=n=>{switch(t.type){case"failed":return{...n,fetchFailureCount:t.failureCount,fetchFailureReason:t.error};case"pause":return{...n,fetchStatus:"paused"};case"continue":return{...n,fetchStatus:"fetching"};case"fetch":return{...n,...VQ(n.data,this.options),fetchMeta:t.meta??null};case"success":const r={...n,...IH(t.data,t.dataUpdatedAt),dataUpdateCount:n.dataUpdateCount+1,...!t.manual&&{fetchStatus:"idle",fetchFailureCount:0,fetchFailureReason:null}};return this.#e=t.manual?r:void 0,r;case"error":const i=t.error;return{...n,error:i,errorUpdateCount:n.errorUpdateCount+1,errorUpdatedAt:Date.now(),fetchFailureCount:n.fetchFailureCount+1,fetchFailureReason:i,fetchStatus:"idle",status:"error",isInvalidated:!0};case"invalidate":return{...n,isInvalidated:!0};case"setState":return{...n,...t.state}}};this.state=e(this.state),Qa.batch(()=>{this.observers.forEach(n=>{n.onQueryUpdate()}),this.#n.notify({query:this,type:"updated",action:t})})}};function VQ(t,e){return{fetchFailureCount:0,fetchFailureReason:null,fetchStatus:HQ(e.networkMode)?"fetching":"paused",...t===void 0&&{error:null,status:"pending"}}}function IH(t,e){return{data:t,dataUpdatedAt:e??Date.now(),error:null,isInvalidated:!1,status:"success"}}function OH(t){const e=typeof t.initialData=="function"?t.initialData():t.initialData,n=e!==void 0,r=n?typeof t.initialDataUpdatedAt=="function"?t.initialDataUpdatedAt():t.initialDataUpdatedAt:0;return{data:e,dataUpdateCount:0,dataUpdatedAt:n?r??Date.now():0,error:null,errorUpdateCount:0,errorUpdatedAt:0,fetchFailureCount:0,fetchFailureReason:null,fetchMeta:null,isInvalidated:!1,status:n?"success":"pending",fetchStatus:"idle"}}var $I=class extends Hg{constructor(t,e){super(),this.options=e,this.#t=t,this.#s=null,this.#o=mF(),this.bindMethods(),this.setOptions(e)}#t;#e=void 0;#n=void 0;#a=void 0;#r;#i;#o;#s;#p;#u;#m;#c;#d;#l;#h=new Set;bindMethods(){this.refetch=this.refetch.bind(this)}onSubscribe(){this.listeners.size===1&&(this.#e.addObserver(this),zH(this.#e,this.options)?this.#f():this.updateResult(),this.#y())}onUnsubscribe(){this.hasListeners()||this.destroy()}shouldFetchOnReconnect(){return pF(this.#e,this.options,this.options.refetchOnReconnect)}shouldFetchOnWindowFocus(){return pF(this.#e,this.options,this.options.refetchOnWindowFocus)}destroy(){this.listeners=new Set,this.#v(),this.#w(),this.#e.removeObserver(this)}setOptions(t){const e=this.options,n=this.#e;if(this.options=this.#t.defaultQueryOptions(t),this.options.enabled!==void 0&&typeof this.options.enabled!="boolean"&&typeof this.options.enabled!="function"&&typeof $l(this.options.enabled,this.#e)!="boolean")throw new Error("Expected enabled to be a boolean or a callback that returns a boolean");this.#S(),this.#e.setOptions(this.options),e._defaulted&&!lw(this.options,e)&&this.#t.getQueryCache().notify({type:"observerOptionsUpdated",query:this.#e,observer:this});const r=this.hasListeners();r&&UH(this.#e,n,this.options,e)&&this.#f(),this.updateResult(),r&&(this.#e!==n||$l(this.options.enabled,this.#e)!==$l(e.enabled,this.#e)||rp(this.options.staleTime,this.#e)!==rp(e.staleTime,this.#e))&&this.#g();const i=this.#b();r&&(this.#e!==n||$l(this.options.enabled,this.#e)!==$l(e.enabled,this.#e)||i!==this.#l)&&this.#x(i)}getOptimisticResult(t){const e=this.#t.getQueryCache().build(this.#t,t),n=this.createResult(e,t);return Spe(this,n)&&(this.#a=n,this.#i=this.options,this.#r=this.#e.state),n}getCurrentResult(){return this.#a}trackResult(t,e){return new Proxy(t,{get:(n,r)=>(this.trackProp(r),e?.(r),r==="promise"&&(this.trackProp("data"),!this.options.experimental_prefetchInRender&&this.#o.status==="pending"&&this.#o.reject(new Error("experimental_prefetchInRender feature flag is not enabled"))),Reflect.get(n,r))})}trackProp(t){this.#h.add(t)}getCurrentQuery(){return this.#e}refetch({...t}={}){return this.fetch({...t})}fetchOptimistic(t){const e=this.#t.defaultQueryOptions(t),n=this.#t.getQueryCache().build(this.#t,e);return n.fetch().then(()=>this.createResult(n,e))}fetch(t){return this.#f({...t,cancelRefetch:t.cancelRefetch??!0}).then(()=>(this.updateResult(),this.#a))}#f(t){this.#S();let e=this.#e.fetch(this.options,t);return t?.throwOnError||(e=e.catch(Bs)),e}#g(){this.#v();const t=rp(this.options.staleTime,this.#e);if(mg||this.#a.isStale||!cF(t))return;const n=UQ(this.#a.dataUpdatedAt,t)+1;this.#c=zf.setTimeout(()=>{this.#a.isStale||this.updateResult()},n)}#b(){return(typeof this.options.refetchInterval=="function"?this.options.refetchInterval(this.#e):this.options.refetchInterval)??!1}#x(t){this.#w(),this.#l=t,!(mg||$l(this.options.enabled,this.#e)===!1||!cF(this.#l)||this.#l===0)&&(this.#d=zf.setInterval(()=>{(this.options.refetchIntervalInBackground||qI.isFocused())&&this.#f()},this.#l))}#y(){this.#g(),this.#x(this.#b())}#v(){this.#c&&(zf.clearTimeout(this.#c),this.#c=void 0)}#w(){this.#d&&(zf.clearInterval(this.#d),this.#d=void 0)}createResult(t,e){const n=this.#e,r=this.options,i=this.#a,s=this.#r,o=this.#i,c=t!==n?t.state:this.#n,{state:d}=t;let u={...d},m=!1,p;if(e._optimisticResults){const F=this.hasListeners(),k=!F&&zH(t,e),E=F&&UH(t,n,e,r);(k||E)&&(u={...u,...VQ(d.data,t.options)}),e._optimisticResults==="isRestoring"&&(u.fetchStatus="idle")}let{error:f,errorUpdatedAt:x,status:v}=u;p=u.data;let b=!1;if(e.placeholderData!==void 0&&p===void 0&&v==="pending"){let F;i?.isPlaceholderData&&e.placeholderData===o?.placeholderData?(F=i.data,b=!0):F=typeof e.placeholderData=="function"?e.placeholderData(this.#m?.state.data,this.#m):e.placeholderData,F!==void 0&&(v="success",p=uF(i?.data,F,e),m=!0)}if(e.select&&p!==void 0&&!b)if(i&&p===s?.data&&e.select===this.#p)p=this.#u;else try{this.#p=e.select,p=e.select(p),p=uF(i?.data,p,e),this.#u=p,this.#s=null}catch(F){this.#s=F}this.#s&&(f=this.#s,p=this.#u,x=Date.now(),v="error");const g=u.fetchStatus==="fetching",S=v==="pending",N=v==="error",P=S&&g,C=p!==void 0,T={status:v,fetchStatus:u.fetchStatus,isPending:S,isSuccess:v==="success",isError:N,isInitialLoading:P,isLoading:P,data:p,dataUpdatedAt:u.dataUpdatedAt,error:f,errorUpdatedAt:x,failureCount:u.fetchFailureCount,failureReason:u.fetchFailureReason,errorUpdateCount:u.errorUpdateCount,isFetched:u.dataUpdateCount>0||u.errorUpdateCount>0,isFetchedAfterMount:u.dataUpdateCount>c.dataUpdateCount||u.errorUpdateCount>c.errorUpdateCount,isFetching:g,isRefetching:g&&!S,isLoadingError:N&&!C,isPaused:u.fetchStatus==="paused",isPlaceholderData:m,isRefetchError:N&&C,isStale:VI(t,e),refetch:this.refetch,promise:this.#o,isEnabled:$l(e.enabled,t)!==!1};if(this.options.experimental_prefetchInRender){const F=T.data!==void 0,k=T.status==="error"&&!F,E=X=>{k?X.reject(T.error):F&&X.resolve(T.data)},$=()=>{const X=this.#o=T.promise=mF();E(X)},z=this.#o;switch(z.status){case"pending":t.queryHash===n.queryHash&&E(z);break;case"fulfilled":(k||T.data!==z.value)&&$();break;case"rejected":(!k||T.error!==z.reason)&&$();break}}return T}updateResult(){const t=this.#a,e=this.createResult(this.#e,this.options);if(this.#r=this.#e.state,this.#i=this.options,this.#r.data!==void 0&&(this.#m=this.#e),lw(e,t))return;this.#a=e;const n=()=>{if(!t)return!0;const{notifyOnChangeProps:r}=this.options,i=typeof r=="function"?r():r;if(i==="all"||!i&&!this.#h.size)return!0;const s=new Set(i??this.#h);return this.options.throwOnError&&s.add("error"),Object.keys(this.#a).some(o=>{const l=o;return this.#a[l]!==t[l]&&s.has(l)})};this.#_({listeners:n()})}#S(){const t=this.#t.getQueryCache().build(this.#t,this.options);if(t===this.#e)return;const e=this.#e;this.#e=t,this.#n=t.state,this.hasListeners()&&(e?.removeObserver(this),t.addObserver(this))}onQueryUpdate(){this.updateResult(),this.hasListeners()&&this.#y()}#_(t){Qa.batch(()=>{t.listeners&&this.listeners.forEach(e=>{e(this.#a)}),this.#t.getQueryCache().notify({query:this.#e,type:"observerResultsUpdated"})})}};function wpe(t,e){return $l(e.enabled,t)!==!1&&t.state.data===void 0&&!(t.state.status==="error"&&e.retryOnMount===!1)}function zH(t,e){return wpe(t,e)||t.state.data!==void 0&&pF(t,e,e.refetchOnMount)}function pF(t,e,n){if($l(e.enabled,t)!==!1&&rp(e.staleTime,t)!=="static"){const r=typeof n=="function"?n(t):n;return r==="always"||r!==!1&&VI(t,e)}return!1}function UH(t,e,n,r){return(t!==e||$l(r.enabled,t)===!1)&&(!n.suspense||t.state.status!=="error")&&VI(t,n)}function VI(t,e){return $l(e.enabled,t)!==!1&&t.isStaleByTime(rp(e.staleTime,t))}function Spe(t,e){return!lw(t.getCurrentResult(),e)}function BH(t){return{onFetch:(e,n)=>{const r=e.options,i=e.fetchOptions?.meta?.fetchMore?.direction,s=e.state.data?.pages||[],o=e.state.data?.pageParams||[];let l={pages:[],pageParams:[]},c=0;const d=async()=>{let u=!1;const m=x=>{ppe(x,()=>e.signal,()=>u=!0)},p=BQ(e.options,e.fetchOptions),f=async(x,v,b)=>{if(u)return Promise.reject();if(v==null&&x.pages.length)return Promise.resolve(x);const S=(()=>{const A={client:e.client,queryKey:e.queryKey,pageParam:v,direction:b?"backward":"forward",meta:e.options.meta};return m(A),A})(),N=await p(S),{maxPages:P}=e.options,C=b?hpe:mpe;return{pages:C(x.pages,N,P),pageParams:C(x.pageParams,v,P)}};if(i&&s.length){const x=i==="backward",v=x?_pe:HH,b={pages:s,pageParams:o},g=v(r,b);l=await f(b,g,x)}else{const x=t??s.length;do{const v=c===0?o[0]??r.initialPageParam:HH(r,l);if(c>0&&v==null)break;l=await f(l,v),c++}while(c<x)}return l};e.options.persister?e.fetchFn=()=>e.options.persister?.(d,{client:e.client,queryKey:e.queryKey,meta:e.options.meta,signal:e.signal},n):e.fetchFn=d}}}function HH(t,{pages:e,pageParams:n}){const r=e.length-1;return e.length>0?t.getNextPageParam(e[r],e,n[r],n):void 0}function _pe(t,{pages:e,pageParams:n}){return e.length>0?t.getPreviousPageParam?.(e[0],e,n[0],n):void 0}var kpe=class extends $Q{#t;#e;#n;#a;constructor(t){super(),this.#t=t.client,this.mutationId=t.mutationId,this.#n=t.mutationCache,this.#e=[],this.state=t.state||GQ(),this.setOptions(t.options),this.scheduleGc()}setOptions(t){this.options=t,this.updateGcTime(this.options.gcTime)}get meta(){return this.options.meta}addObserver(t){this.#e.includes(t)||(this.#e.push(t),this.clearGcTimeout(),this.#n.notify({type:"observerAdded",mutation:this,observer:t}))}removeObserver(t){this.#e=this.#e.filter(e=>e!==t),this.scheduleGc(),this.#n.notify({type:"observerRemoved",mutation:this,observer:t})}optionalRemove(){this.#e.length||(this.state.status==="pending"?this.scheduleGc():this.#n.remove(this))}continue(){return this.#a?.continue()??this.execute(this.state.variables)}async execute(t){const e=()=>{this.#r({type:"continue"})},n={client:this.#t,meta:this.options.meta,mutationKey:this.options.mutationKey};this.#a=qQ({fn:()=>this.options.mutationFn?this.options.mutationFn(t,n):Promise.reject(new Error("No mutationFn found")),onFail:(s,o)=>{this.#r({type:"failed",failureCount:s,error:o})},onPause:()=>{this.#r({type:"pause"})},onContinue:e,retry:this.options.retry??0,retryDelay:this.options.retryDelay,networkMode:this.options.networkMode,canRun:()=>this.#n.canRun(this)});const r=this.state.status==="pending",i=!this.#a.canStart();try{if(r)e();else{this.#r({type:"pending",variables:t,isPaused:i}),this.#n.config.onMutate&&await this.#n.config.onMutate(t,this,n);const o=await this.options.onMutate?.(t,n);o!==this.state.context&&this.#r({type:"pending",context:o,variables:t,isPaused:i})}const s=await this.#a.start();return await this.#n.config.onSuccess?.(s,t,this.state.context,this,n),await this.options.onSuccess?.(s,t,this.state.context,n),await this.#n.config.onSettled?.(s,null,this.state.variables,this.state.context,this,n),await this.options.onSettled?.(s,null,t,this.state.context,n),this.#r({type:"success",data:s}),s}catch(s){try{await this.#n.config.onError?.(s,t,this.state.context,this,n)}catch(o){Promise.reject(o)}try{await this.options.onError?.(s,t,this.state.context,n)}catch(o){Promise.reject(o)}try{await this.#n.config.onSettled?.(void 0,s,this.state.variables,this.state.context,this,n)}catch(o){Promise.reject(o)}try{await this.options.onSettled?.(void 0,s,t,this.state.context,n)}catch(o){Promise.reject(o)}throw this.#r({type:"error",error:s}),s}finally{this.#n.runNext(this)}}#r(t){const e=n=>{switch(t.type){case"failed":return{...n,failureCount:t.failureCount,failureReason:t.error};case"pause":return{...n,isPaused:!0};case"continue":return{...n,isPaused:!1};case"pending":return{...n,context:t.context,data:void 0,failureCount:0,failureReason:null,error:null,isPaused:t.isPaused,status:"pending",variables:t.variables,submittedAt:Date.now()};case"success":return{...n,data:t.data,failureCount:0,failureReason:null,error:null,status:"success",isPaused:!1};case"error":return{...n,data:void 0,error:t.error,failureCount:n.failureCount+1,failureReason:t.error,isPaused:!1,status:"error"}}};this.state=e(this.state),Qa.batch(()=>{this.#e.forEach(n=>{n.onMutationUpdate(t)}),this.#n.notify({mutation:this,type:"updated",action:t})})}};function GQ(){return{context:void 0,data:void 0,error:null,failureCount:0,failureReason:null,isPaused:!1,status:"idle",variables:void 0,submittedAt:0}}var Npe=class extends Hg{constructor(t={}){super(),this.config=t,this.#t=new Set,this.#e=new Map,this.#n=0}#t;#e;#n;build(t,e,n){const r=new kpe({client:t,mutationCache:this,mutationId:++this.#n,options:t.defaultMutationOptions(e),state:n});return this.add(r),r}add(t){this.#t.add(t);const e=n1(t);if(typeof e=="string"){const n=this.#e.get(e);n?n.push(t):this.#e.set(e,[t])}this.notify({type:"added",mutation:t})}remove(t){if(this.#t.delete(t)){const e=n1(t);if(typeof e=="string"){const n=this.#e.get(e);if(n)if(n.length>1){const r=n.indexOf(t);r!==-1&&n.splice(r,1)}else n[0]===t&&this.#e.delete(e)}}this.notify({type:"removed",mutation:t})}canRun(t){const e=n1(t);if(typeof e=="string"){const r=this.#e.get(e)?.find(i=>i.state.status==="pending");return!r||r===t}else return!0}runNext(t){const e=n1(t);return typeof e=="string"?this.#e.get(e)?.find(r=>r!==t&&r.state.isPaused)?.continue()??Promise.resolve():Promise.resolve()}clear(){Qa.batch(()=>{this.#t.forEach(t=>{this.notify({type:"removed",mutation:t})}),this.#t.clear(),this.#e.clear()})}getAll(){return Array.from(this.#t)}find(t){const e={exact:!0,...t};return this.getAll().find(n=>FH(e,n))}findAll(t={}){return this.getAll().filter(e=>FH(t,e))}notify(t){Qa.batch(()=>{this.listeners.forEach(e=>{e(t)})})}resumePausedMutations(){const t=this.getAll().filter(e=>e.state.isPaused);return Qa.batch(()=>Promise.all(t.map(e=>e.continue().catch(Bs))))}};function n1(t){return t.options.scope?.id}var Cpe=class extends Hg{#t;#e=void 0;#n;#a;constructor(e,n){super(),this.#t=e,this.setOptions(n),this.bindMethods(),this.#r()}bindMethods(){this.mutate=this.mutate.bind(this),this.reset=this.reset.bind(this)}setOptions(e){const n=this.options;this.options=this.#t.defaultMutationOptions(e),lw(this.options,n)||this.#t.getMutationCache().notify({type:"observerOptionsUpdated",mutation:this.#n,observer:this}),n?.mutationKey&&this.options.mutationKey&&hg(n.mutationKey)!==hg(this.options.mutationKey)?this.reset():this.#n?.state.status==="pending"&&this.#n.setOptions(this.options)}onUnsubscribe(){this.hasListeners()||this.#n?.removeObserver(this)}onMutationUpdate(e){this.#r(),this.#i(e)}getCurrentResult(){return this.#e}reset(){this.#n?.removeObserver(this),this.#n=void 0,this.#r(),this.#i()}mutate(e,n){return this.#a=n,this.#n?.removeObserver(this),this.#n=this.#t.getMutationCache().build(this.#t,this.options),this.#n.addObserver(this),this.#n.execute(e)}#r(){const e=this.#n?.state??GQ();this.#e={...e,isPending:e.status==="pending",isSuccess:e.status==="success",isError:e.status==="error",isIdle:e.status==="idle",mutate:this.mutate,reset:this.reset}}#i(e){Qa.batch(()=>{if(this.#a&&this.hasListeners()){const n=this.#e.variables,r=this.#e.context,i={client:this.#t,meta:this.options.meta,mutationKey:this.options.mutationKey};if(e?.type==="success"){try{this.#a.onSuccess?.(e.data,n,r,i)}catch(s){Promise.reject(s)}try{this.#a.onSettled?.(e.data,null,n,r,i)}catch(s){Promise.reject(s)}}else if(e?.type==="error"){try{this.#a.onError?.(e.error,n,r,i)}catch(s){Promise.reject(s)}try{this.#a.onSettled?.(void 0,e.error,n,r,i)}catch(s){Promise.reject(s)}}}this.listeners.forEach(n=>{n(this.#e)})})}};function qH(t,e){const n=new Set(e);return t.filter(r=>!n.has(r))}function Ppe(t,e,n){const r=t.slice(0);return r[e]=n,r}var Tpe=class extends Hg{#t;#e;#n;#a;#r;#i;#o;#s;#p;#u=[];constructor(t,e,n){super(),this.#t=t,this.#a=n,this.#n=[],this.#r=[],this.#e=[],this.setQueries(e)}onSubscribe(){this.listeners.size===1&&this.#r.forEach(t=>{t.subscribe(e=>{this.#l(t,e)})})}onUnsubscribe(){this.listeners.size||this.destroy()}destroy(){this.listeners=new Set,this.#r.forEach(t=>{t.destroy()})}setQueries(t,e){this.#n=t,this.#a=e,Qa.batch(()=>{const n=this.#r,r=this.#d(this.#n);r.forEach(u=>u.observer.setOptions(u.defaultedQueryOptions));const i=r.map(u=>u.observer),s=i.map(u=>u.getCurrentResult()),o=n.length!==i.length,l=i.some((u,m)=>u!==n[m]),c=o||l,d=c?!0:s.some((u,m)=>{const p=this.#e[m];return!p||!lw(u,p)});!c&&!d||(c&&(this.#u=r,this.#r=i),this.#e=s,this.hasListeners()&&(c&&(qH(n,i).forEach(u=>{u.destroy()}),qH(i,n).forEach(u=>{u.subscribe(m=>{this.#l(u,m)})})),this.#h()))})}getCurrentResult(){return this.#e}getQueries(){return this.#r.map(t=>t.getCurrentQuery())}getObservers(){return this.#r}getOptimisticResult(t,e){const n=this.#d(t),r=n.map(s=>s.observer.getOptimisticResult(s.defaultedQueryOptions)),i=n.map(s=>s.defaultedQueryOptions.queryHash);return[r,s=>this.#c(s??r,e,i),()=>this.#m(r,n)]}#m(t,e){return e.map((n,r)=>{const i=t[r];return n.defaultedQueryOptions.notifyOnChangeProps?i:n.observer.trackResult(i,s=>{e.forEach(o=>{o.observer.trackProp(s)})})})}#c(t,e,n){if(e){const r=this.#p,i=n!==void 0&&r!==void 0&&(r.length!==n.length||n.some((s,o)=>s!==r[o]));return(!this.#i||this.#e!==this.#s||i||e!==this.#o)&&(this.#o=e,this.#s=this.#e,n!==void 0&&(this.#p=n),this.#i=UI(this.#i,e(t))),this.#i}return t}#d(t){const e=new Map;this.#r.forEach(r=>{const i=r.options.queryHash;if(!i)return;const s=e.get(i);s?s.push(r):e.set(i,[r])});const n=[];return t.forEach(r=>{const i=this.#t.defaultQueryOptions(r),o=e.get(i.queryHash)?.shift()??new $I(this.#t,i);n.push({defaultedQueryOptions:i,observer:o})}),n}#l(t,e){const n=this.#r.indexOf(t);n!==-1&&(this.#e=Ppe(this.#e,n,e),this.#h())}#h(){if(this.hasListeners()){const t=this.#i,e=this.#m(this.#e,this.#u),n=this.#c(e,this.#a?.combine);t!==n&&Qa.batch(()=>{this.listeners.forEach(r=>{r(this.#e)})})}}},Ape=class extends Hg{constructor(t={}){super(),this.config=t,this.#t=new Map}#t;build(t,e,n){const r=e.queryKey,i=e.queryHash??zI(r,e);let s=this.get(i);return s||(s=new vpe({client:t,queryKey:r,queryHash:i,options:t.defaultQueryOptions(e),state:n,defaultOptions:t.getQueryDefaults(r)}),this.add(s)),s}add(t){this.#t.has(t.queryHash)||(this.#t.set(t.queryHash,t),this.notify({type:"added",query:t}))}remove(t){const e=this.#t.get(t.queryHash);e&&(t.destroy(),e===t&&this.#t.delete(t.queryHash),this.notify({type:"removed",query:t}))}clear(){Qa.batch(()=>{this.getAll().forEach(t=>{this.remove(t)})})}get(t){return this.#t.get(t)}getAll(){return[...this.#t.values()]}find(t){const e={exact:!0,...t};return this.getAll().find(n=>DH(e,n))}findAll(t={}){const e=this.getAll();return Object.keys(t).length>0?e.filter(n=>DH(t,n)):e}notify(t){Qa.batch(()=>{this.listeners.forEach(e=>{e(t)})})}onFocus(){Qa.batch(()=>{this.getAll().forEach(t=>{t.onFocus()})})}onOnline(){Qa.batch(()=>{this.getAll().forEach(t=>{t.onOnline()})})}},jpe=class{#t;#e;#n;#a;#r;#i;#o;#s;constructor(t={}){this.#t=t.queryCache||new Ape,this.#e=t.mutationCache||new Npe,this.#n=t.defaultOptions||{},this.#a=new Map,this.#r=new Map,this.#i=0}mount(){this.#i++,this.#i===1&&(this.#o=qI.subscribe(async t=>{t&&(await this.resumePausedMutations(),this.#t.onFocus())}),this.#s=_N.subscribe(async t=>{t&&(await this.resumePausedMutations(),this.#t.onOnline())}))}unmount(){this.#i--,this.#i===0&&(this.#o?.(),this.#o=void 0,this.#s?.(),this.#s=void 0)}isFetching(t){return this.#t.findAll({...t,fetchStatus:"fetching"}).length}isMutating(t){return this.#e.findAll({...t,status:"pending"}).length}getQueryData(t){const e=this.defaultQueryOptions({queryKey:t});return this.#t.get(e.queryHash)?.state.data}ensureQueryData(t){const e=this.defaultQueryOptions(t),n=this.#t.build(this,e),r=n.state.data;return r===void 0?this.fetchQuery(t):(t.revalidateIfStale&&n.isStaleByTime(rp(e.staleTime,n))&&this.prefetchQuery(e),Promise.resolve(r))}getQueriesData(t){return this.#t.findAll(t).map(({queryKey:e,state:n})=>{const r=n.data;return[e,r]})}setQueryData(t,e,n){const r=this.defaultQueryOptions({queryKey:t}),s=this.#t.get(r.queryHash)?.state.data,o=cpe(e,s);if(o!==void 0)return this.#t.build(this,r).setData(o,{...n,manual:!0})}setQueriesData(t,e,n){return Qa.batch(()=>this.#t.findAll(t).map(({queryKey:r})=>[r,this.setQueryData(r,e,n)]))}getQueryState(t){const e=this.defaultQueryOptions({queryKey:t});return this.#t.get(e.queryHash)?.state}removeQueries(t){const e=this.#t;Qa.batch(()=>{e.findAll(t).forEach(n=>{e.remove(n)})})}resetQueries(t,e){const n=this.#t;return Qa.batch(()=>(n.findAll(t).forEach(r=>{r.reset()}),this.refetchQueries({type:"active",...t},e)))}cancelQueries(t,e={}){const n={revert:!0,...e},r=Qa.batch(()=>this.#t.findAll(t).map(i=>i.cancel(n)));return Promise.all(r).then(Bs).catch(Bs)}invalidateQueries(t,e={}){return Qa.batch(()=>(this.#t.findAll(t).forEach(n=>{n.invalidate()}),t?.refetchType==="none"?Promise.resolve():this.refetchQueries({...t,type:t?.refetchType??t?.type??"active"},e)))}refetchQueries(t,e={}){const n={...e,cancelRefetch:e.cancelRefetch??!0},r=Qa.batch(()=>this.#t.findAll(t).filter(i=>!i.isDisabled()&&!i.isStatic()).map(i=>{let s=i.fetch(void 0,n);return n.throwOnError||(s=s.catch(Bs)),i.state.fetchStatus==="paused"?Promise.resolve():s}));return Promise.all(r).then(Bs)}fetchQuery(t){const e=this.defaultQueryOptions(t);e.retry===void 0&&(e.retry=!1);const n=this.#t.build(this,e);return n.isStaleByTime(rp(e.staleTime,n))?n.fetch(e):Promise.resolve(n.state.data)}prefetchQuery(t){return this.fetchQuery(t).then(Bs).catch(Bs)}fetchInfiniteQuery(t){return t.behavior=BH(t.pages),this.fetchQuery(t)}prefetchInfiniteQuery(t){return this.fetchInfiniteQuery(t).then(Bs).catch(Bs)}ensureInfiniteQueryData(t){return t.behavior=BH(t.pages),this.ensureQueryData(t)}resumePausedMutations(){return _N.isOnline()?this.#e.resumePausedMutations():Promise.resolve()}getQueryCache(){return this.#t}getMutationCache(){return this.#e}getDefaultOptions(){return this.#n}setDefaultOptions(t){this.#n=t}setQueryDefaults(t,e){this.#a.set(hg(t),{queryKey:t,defaultOptions:e})}getQueryDefaults(t){const e=[...this.#a.values()],n={};return e.forEach(r=>{ow(t,r.queryKey)&&Object.assign(n,r.defaultOptions)}),n}setMutationDefaults(t,e){this.#r.set(hg(t),{mutationKey:t,defaultOptions:e})}getMutationDefaults(t){const e=[...this.#r.values()],n={};return e.forEach(r=>{ow(t,r.mutationKey)&&Object.assign(n,r.defaultOptions)}),n}defaultQueryOptions(t){if(t._defaulted)return t;const e={...this.#n.queries,...this.getQueryDefaults(t.queryKey),...t,_defaulted:!0};return e.queryHash||(e.queryHash=zI(e.queryKey,e)),e.refetchOnReconnect===void 0&&(e.refetchOnReconnect=e.networkMode!=="always"),e.throwOnError===void 0&&(e.throwOnError=!!e.suspense),!e.networkMode&&e.persister&&(e.networkMode="offlineFirst"),e.queryFn===BI&&(e.enabled=!1),e}defaultMutationOptions(t){return t?._defaulted?t:{...this.#n.mutations,...t?.mutationKey&&this.getMutationDefaults(t.mutationKey),...t,_defaulted:!0}}clear(){this.#t.clear(),this.#e.clear()}},WQ=w.createContext(void 0),tn=t=>{const e=w.useContext(WQ);if(!e)throw new Error("No QueryClient set, use QueryClientProvider to set one");return e},Mpe=({client:t,children:e})=>(w.useEffect(()=>(t.mount(),()=>{t.unmount()}),[t]),a.jsx(WQ.Provider,{value:t,children:e})),KQ=w.createContext(!1),XQ=()=>w.useContext(KQ);KQ.Provider;function Epe(){let t=!1;return{clearReset:()=>{t=!1},reset:()=>{t=!0},isReset:()=>t}}var Dpe=w.createContext(Epe()),YQ=()=>w.useContext(Dpe),QQ=(t,e,n)=>{const r=n?.state.error&&typeof t.throwOnError=="function"?HI(t.throwOnError,[n.state.error,n]):t.throwOnError;(t.suspense||t.experimental_prefetchInRender||r)&&(e.isReset()||(t.retryOnMount=!1))},JQ=t=>{w.useEffect(()=>{t.clearReset()},[t])},ZQ=({result:t,errorResetBoundary:e,throwOnError:n,query:r,suspense:i})=>t.isError&&!e.isReset()&&!t.isFetching&&r&&(i&&t.data===void 0||HI(n,[t.error,r])),eJ=t=>{if(t.suspense){const n=i=>i==="static"?i:Math.max(i??1e3,1e3),r=t.staleTime;t.staleTime=typeof r=="function"?(...i)=>n(r(...i)):n(r),typeof t.gcTime=="number"&&(t.gcTime=Math.max(t.gcTime,1e3))}},tJ=(t,e)=>t.isLoading&&t.isFetching&&!e,fF=(t,e)=>t?.suspense&&e.isPending,kN=(t,e,n)=>e.fetchOptimistic(t).catch(()=>{n.clearReset()});function Dp({queries:t,...e},n){const r=tn(),i=XQ(),s=YQ(),o=w.useMemo(()=>t.map(v=>{const b=r.defaultQueryOptions(v);return b._optimisticResults=i?"isRestoring":"optimistic",b}),[t,r,i]);o.forEach(v=>{eJ(v);const b=r.getQueryCache().get(v.queryHash);QQ(v,s,b)}),JQ(s);const[l]=w.useState(()=>new Tpe(r,o,e)),[c,d,u]=l.getOptimisticResult(o,e.combine),m=!i&&e.subscribed!==!1;w.useSyncExternalStore(w.useCallback(v=>m?l.subscribe(Qa.batchCalls(v)):Bs,[l,m]),()=>l.getCurrentResult(),()=>l.getCurrentResult()),w.useEffect(()=>{l.setQueries(o,e)},[o,e,l]);const f=c.some((v,b)=>fF(o[b],v))?c.flatMap((v,b)=>{const g=o[b];if(g){const S=new $I(r,g);if(fF(g,v))return kN(g,S,s);tJ(v,i)&&kN(g,S,s)}return[]}):[];if(f.length>0)throw Promise.all(f);const x=c.find((v,b)=>{const g=o[b];return g&&ZQ({result:v,errorResetBoundary:s,throwOnError:g.throwOnError,query:r.getQueryCache().get(g.queryHash),suspense:g.suspense})});if(x?.error)throw x.error;return d(u())}function Fpe(t,e,n){const r=XQ(),i=YQ(),s=tn(),o=s.defaultQueryOptions(t);s.getDefaultOptions().queries?._experimental_beforeQuery?.(o);const l=s.getQueryCache().get(o.queryHash);o._optimisticResults=r?"isRestoring":"optimistic",eJ(o),QQ(o,i,l),JQ(i);const c=!s.getQueryCache().get(o.queryHash),[d]=w.useState(()=>new e(s,o)),u=d.getOptimisticResult(o),m=!r&&t.subscribed!==!1;if(w.useSyncExternalStore(w.useCallback(p=>{const f=m?d.subscribe(Qa.batchCalls(p)):Bs;return d.updateResult(),f},[d,m]),()=>d.getCurrentResult(),()=>d.getCurrentResult()),w.useEffect(()=>{d.setOptions(o)},[o,d]),fF(o,u))throw kN(o,d,i);if(ZQ({result:u,errorResetBoundary:i,throwOnError:o.throwOnError,query:l,suspense:o.suspense}))throw u.error;return s.getDefaultOptions().queries?._experimental_afterQuery?.(o,u),o.experimental_prefetchInRender&&!mg&&tJ(u,r)&&(c?kN(o,d,i):l?.promise)?.catch(Bs).finally(()=>{d.updateResult()}),o.notifyOnChangeProps?u:d.trackResult(u)}function Qe(t,e){return Fpe(t,$I)}function ot(t,e){const n=tn(),[r]=w.useState(()=>new Cpe(n,t));w.useEffect(()=>{r.setOptions(t)},[r,t]);const i=w.useSyncExternalStore(w.useCallback(o=>r.subscribe(Qa.batchCalls(o)),[r]),()=>r.getCurrentResult(),()=>r.getCurrentResult()),s=w.useCallback((o,l)=>{r.mutate(o,l).catch(Bs)},[r]);if(i.error&&HI(r.options.throwOnError,[i.error]))throw i.error;return{...i,mutate:s,mutateAsync:i.mutate}}const Rpe=t=>t.replace(/([a-z0-9])([A-Z])/g,"$1-$2").toLowerCase(),Lpe=t=>t.replace(/^([A-Z])|[\s-_]+(\w)/g,(e,n,r)=>r?r.toUpperCase():n.toLowerCase()),$H=t=>{const e=Lpe(t);return e.charAt(0).toUpperCase()+e.slice(1)},nJ=(...t)=>t.filter((e,n,r)=>!!e&&e.trim()!==""&&r.indexOf(e)===n).join(" ").trim(),Ipe=t=>{for(const e in t)if(e.startsWith("aria-")||e==="role"||e==="title")return!0};var Ope={xmlns:"http://www.w3.org/2000/svg",width:24,height:24,viewBox:"0 0 24 24",fill:"none",stroke:"currentColor",strokeWidth:2,strokeLinecap:"round",strokeLinejoin:"round"};const zpe=w.forwardRef(({color:t="currentColor",size:e=24,strokeWidth:n=2,absoluteStrokeWidth:r,className:i="",children:s,iconNode:o,...l},c)=>w.createElement("svg",{ref:c,...Ope,width:e,height:e,stroke:t,strokeWidth:r?Number(n)*24/Number(e):n,className:nJ("lucide",i),...!s&&!Ipe(l)&&{"aria-hidden":"true"},...l},[...o.map(([d,u])=>w.createElement(d,u)),...Array.isArray(s)?s:[s]]));const ut=(t,e)=>{const n=w.forwardRef(({className:r,...i},s)=>w.createElement(zpe,{ref:s,iconNode:e,className:nJ(`lucide-${Rpe($H(t))}`,`lucide-${t}`,r),...i}));return n.displayName=$H(t),n};const Upe=[["path",{d:"M18 17.5a2.5 2.5 0 1 1-4 2.03V12",key:"yd12zl"}],["path",{d:"M6 12H4a2 2 0 0 1-2-2V5a2 2 0 0 1 2-2h16a2 2 0 0 1 2 2v5a2 2 0 0 1-2 2h-2",key:"larmp2"}],["path",{d:"M6 8h12",key:"6g4wlu"}],["path",{d:"M6.6 15.572A2 2 0 1 0 10 17v-5",key:"1x1kqn"}]],Bpe=ut("air-vent",Upe);const Hpe=[["rect",{width:"20",height:"5",x:"2",y:"3",rx:"1",key:"1wp1u1"}],["path",{d:"M4 8v11a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V8",key:"1s80jp"}],["path",{d:"M10 12h4",key:"a56b0p"}]],lo=ut("archive",Hpe);const qpe=[["path",{d:"m3 16 4 4 4-4",key:"1co6wj"}],["path",{d:"M7 20V4",key:"1yoxec"}],["path",{d:"M11 4h10",key:"1w87gc"}],["path",{d:"M11 8h7",key:"djye34"}],["path",{d:"M11 12h4",key:"q8tih4"}]],$pe=ut("arrow-down-wide-narrow",qpe);const Vpe=[["path",{d:"M12 5v14",key:"s699le"}],["path",{d:"m19 12-7 7-7-7",key:"1idqje"}]],pg=ut("arrow-down",Vpe);const Gpe=[["path",{d:"m12 19-7-7 7-7",key:"1l729n"}],["path",{d:"M19 12H5",key:"x3x0zl"}]],GI=ut("arrow-left",Gpe);const Wpe=[["path",{d:"m16 3 4 4-4 4",key:"1x1c3m"}],["path",{d:"M20 7H4",key:"zbl0bi"}],["path",{d:"m8 21-4-4 4-4",key:"h9nckh"}],["path",{d:"M4 17h16",key:"g4d7ey"}]],gF=ut("arrow-right-left",Wpe);const Kpe=[["path",{d:"M5 12h14",key:"1ays0h"}],["path",{d:"m12 5 7 7-7 7",key:"xquz4c"}]],NN=ut("arrow-right",Kpe);const Xpe=[["path",{d:"m21 16-4 4-4-4",key:"f6ql7i"}],["path",{d:"M17 20V4",key:"1ejh1v"}],["path",{d:"m3 8 4-4 4 4",key:"11wl7u"}],["path",{d:"M7 4v16",key:"1glfcx"}]],WI=ut("arrow-up-down",Xpe);const Ype=[["path",{d:"m3 8 4-4 4 4",key:"11wl7u"}],["path",{d:"M7 4v16",key:"1glfcx"}],["path",{d:"M11 12h4",key:"q8tih4"}],["path",{d:"M11 16h7",key:"uosisv"}],["path",{d:"M11 20h10",key:"jvxblo"}]],Qpe=ut("arrow-up-narrow-wide",Ype);const Jpe=[["path",{d:"m5 12 7-7 7 7",key:"hav0vg"}],["path",{d:"M12 19V5",key:"x0mq9r"}]],wp=ut("arrow-up",Jpe);const Zpe=[["path",{d:"M4.5 3h15",key:"c7n0jr"}],["path",{d:"M6 3v16a2 2 0 0 0 2 2h8a2 2 0 0 0 2-2V3",key:"m1uhx7"}],["path",{d:"M6 14h12",key:"4cwo0f"}]],efe=ut("beaker",Zpe);const tfe=[["path",{d:"M10.268 21a2 2 0 0 0 3.464 0",key:"vwvbt9"}],["path",{d:"M17 17H4a1 1 0 0 1-.74-1.673C4.59 13.956 6 12.499 6 8a6 6 0 0 1 .258-1.742",key:"178tsu"}],["path",{d:"m2 2 20 20",key:"1ooewy"}],["path",{d:"M8.668 3.01A6 6 0 0 1 18 8c0 2.687.77 4.653 1.707 6.05",key:"1hqiys"}]],nfe=ut("bell-off",tfe);const rfe=[["path",{d:"M10.268 21a2 2 0 0 0 3.464 0",key:"vwvbt9"}],["path",{d:"M3.262 15.326A1 1 0 0 0 4 17h16a1 1 0 0 0 .74-1.673C19.41 13.956 18 12.499 18 8A6 6 0 0 0 6 8c0 4.499-1.411 5.956-2.738 7.326",key:"11g9vi"}]],ap=ut("bell",rfe);const afe=[["path",{d:"M6 12h9a4 4 0 0 1 0 8H7a1 1 0 0 1-1-1V5a1 1 0 0 1 1-1h7a4 4 0 0 1 0 8",key:"mg9rjx"}]],ife=ut("bold",afe);const sfe=[["path",{d:"M4 19.5v-15A2.5 2.5 0 0 1 6.5 2H19a1 1 0 0 1 1 1v18a1 1 0 0 1-1 1H6.5a1 1 0 0 1 0-5H20",key:"k3hazp"}]],ofe=ut("book",sfe);const lfe=[["path",{d:"m19 21-7-4-7 4V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2v16z",key:"1fy3hk"}]],cfe=ut("bookmark",lfe);const dfe=[["path",{d:"M21 8a2 2 0 0 0-1-1.73l-7-4a2 2 0 0 0-2 0l-7 4A2 2 0 0 0 3 8v8a2 2 0 0 0 1 1.73l7 4a2 2 0 0 0 2 0l7-4A2 2 0 0 0 21 16Z",key:"hh9hay"}],["path",{d:"m3.3 7 8.7 5 8.7-5",key:"g66t2b"}],["path",{d:"M12 22V12",key:"d0xqtd"}]],xi=ut("box",dfe);const ufe=[["path",{d:"M16 20V4a2 2 0 0 0-2-2h-4a2 2 0 0 0-2 2v16",key:"jecpp"}],["rect",{width:"20",height:"14",x:"2",y:"6",rx:"2",key:"i6l2r4"}]],rJ=ut("briefcase",ufe);const mfe=[["path",{d:"M12 20v-9",key:"1qisl0"}],["path",{d:"M14 7a4 4 0 0 1 4 4v3a6 6 0 0 1-12 0v-3a4 4 0 0 1 4-4z",key:"uouzyp"}],["path",{d:"M14.12 3.88 16 2",key:"qol33r"}],["path",{d:"M21 21a4 4 0 0 0-3.81-4",key:"1b0z45"}],["path",{d:"M21 5a4 4 0 0 1-3.55 3.97",key:"5cxbf6"}],["path",{d:"M22 13h-4",key:"1jl80f"}],["path",{d:"M3 21a4 4 0 0 1 3.81-4",key:"1fjd4g"}],["path",{d:"M3 5a4 4 0 0 0 3.55 3.97",key:"1d7oge"}],["path",{d:"M6 13H2",key:"82j7cp"}],["path",{d:"m8 2 1.88 1.88",key:"fmnt4t"}],["path",{d:"M9 7.13V6a3 3 0 1 1 6 0v1.13",key:"1vgav8"}]],Yx=ut("bug",mfe);const hfe=[["path",{d:"M17 19a1 1 0 0 1-1-1v-2a2 2 0 0 1 2-2h2a2 2 0 0 1 2 2v2a1 1 0 0 1-1 1z",key:"trhst0"}],["path",{d:"M17 21v-2",key:"ds4u3f"}],["path",{d:"M19 14V6.5a1 1 0 0 0-7 0v11a1 1 0 0 1-7 0V10",key:"1mo9zo"}],["path",{d:"M21 21v-2",key:"eo0ou"}],["path",{d:"M3 5V3",key:"1k5hjh"}],["path",{d:"M4 10a2 2 0 0 1-2-2V6a1 1 0 0 1 1-1h4a1 1 0 0 1 1 1v2a2 2 0 0 1-2 2z",key:"1dd30t"}],["path",{d:"M7 5V3",key:"1t1388"}]],KI=ut("cable",hfe);const pfe=[["rect",{width:"16",height:"20",x:"4",y:"2",rx:"2",key:"1nb95v"}],["line",{x1:"8",x2:"16",y1:"6",y2:"6",key:"x4nwl0"}],["line",{x1:"16",x2:"16",y1:"14",y2:"18",key:"wjye3r"}],["path",{d:"M16 10h.01",key:"1m94wz"}],["path",{d:"M12 10h.01",key:"1nrarc"}],["path",{d:"M8 10h.01",key:"19clt8"}],["path",{d:"M12 14h.01",key:"1etili"}],["path",{d:"M8 14h.01",key:"6423bh"}],["path",{d:"M12 18h.01",key:"mhygvu"}],["path",{d:"M8 18h.01",key:"lrp35t"}]],ffe=ut("calculator",pfe);const gfe=[["path",{d:"M8 2v4",key:"1cmpym"}],["path",{d:"M16 2v4",key:"4m81vk"}],["rect",{width:"18",height:"18",x:"3",y:"4",rx:"2",key:"1hopcy"}],["path",{d:"M3 10h18",key:"8toen8"}],["path",{d:"M8 14h.01",key:"6423bh"}],["path",{d:"M12 14h.01",key:"1etili"}],["path",{d:"M16 14h.01",key:"1gbofw"}],["path",{d:"M8 18h.01",key:"lrp35t"}],["path",{d:"M12 18h.01",key:"mhygvu"}],["path",{d:"M16 18h.01",key:"kzsmim"}]],bfe=ut("calendar-days",gfe);const xfe=[["path",{d:"M16 19h6",key:"xwg31i"}],["path",{d:"M16 2v4",key:"4m81vk"}],["path",{d:"M19 16v6",key:"tddt3s"}],["path",{d:"M21 12.598V6a2 2 0 0 0-2-2H5a2 2 0 0 0-2 2v14a2 2 0 0 0 2 2h8.5",key:"1glfrc"}],["path",{d:"M3 10h18",key:"8toen8"}],["path",{d:"M8 2v4",key:"1cmpym"}]],yfe=ut("calendar-plus",xfe);const vfe=[["path",{d:"M8 2v4",key:"1cmpym"}],["path",{d:"M16 2v4",key:"4m81vk"}],["rect",{width:"18",height:"18",x:"3",y:"4",rx:"2",key:"1hopcy"}],["path",{d:"M3 10h18",key:"8toen8"}]],da=ut("calendar",vfe);const wfe=[["path",{d:"M13.997 4a2 2 0 0 1 1.76 1.05l.486.9A2 2 0 0 0 18.003 7H20a2 2 0 0 1 2 2v9a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V9a2 2 0 0 1 2-2h1.997a2 2 0 0 0 1.759-1.048l.489-.904A2 2 0 0 1 10.004 4z",key:"18u6gg"}],["circle",{cx:"12",cy:"13",r:"3",key:"1vg3eu"}]],Qx=ut("camera",wfe);const Sfe=[["path",{d:"M3 3v16a2 2 0 0 0 2 2h16",key:"c24i48"}],["path",{d:"M18 17V9",key:"2bz60n"}],["path",{d:"M13 17V5",key:"1frdt8"}],["path",{d:"M8 17v-3",key:"17ska0"}]],_fe=ut("chart-column",Sfe);const kfe=[["path",{d:"M6 5h12",key:"fvfigv"}],["path",{d:"M4 12h10",key:"oujl3d"}],["path",{d:"M12 19h8",key:"baeox8"}]],Nfe=ut("chart-no-axes-gantt",kfe);const Cfe=[["path",{d:"M20 6 9 17l-5-5",key:"1gmf2c"}]],jr=ut("check",Cfe);const Pfe=[["path",{d:"m6 9 6 6 6-6",key:"qrunsl"}]],zn=ut("chevron-down",Pfe);const Tfe=[["path",{d:"m9 18 6-6-6-6",key:"mthhwq"}]],za=ut("chevron-right",Tfe);const Afe=[["path",{d:"m15 18-6-6 6-6",key:"1wnfg3"}]],Uo=ut("chevron-left",Afe);const jfe=[["path",{d:"m18 15-6-6-6 6",key:"153udz"}]],lc=ut("chevron-up",jfe);const Mfe=[["path",{d:"m11 17-5-5 5-5",key:"13zhaf"}],["path",{d:"m18 17-5-5 5-5",key:"h8a8et"}]],XI=ut("chevrons-left",Mfe);const Efe=[["path",{d:"m6 17 5-5-5-5",key:"xnjwq"}],["path",{d:"m13 17 5-5-5-5",key:"17xmmf"}]],YI=ut("chevrons-right",Efe);const Dfe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["line",{x1:"12",x2:"12",y1:"8",y2:"12",key:"1pkeuh"}],["line",{x1:"12",x2:"12.01",y1:"16",y2:"16",key:"4dfq90"}]],Oa=ut("circle-alert",Dfe);const Ffe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["path",{d:"m16 12-4-4-4 4",key:"177agl"}],["path",{d:"M12 16V8",key:"1sbj14"}]],IM=ut("circle-arrow-up",Ffe);const Rfe=[["path",{d:"M21.801 10A10 10 0 1 1 17 3.335",key:"yps3ct"}],["path",{d:"m9 11 3 3L22 4",key:"1pflzl"}]],wr=ut("circle-check-big",Rfe);const Lfe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["path",{d:"m9 12 2 2 4-4",key:"dzmm74"}]],Bc=ut("circle-check",Lfe);const Ife=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["circle",{cx:"12",cy:"12",r:"1",key:"41hilf"}]],Ofe=ut("circle-dot",Ife);const zfe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["rect",{x:"9",y:"9",width:"6",height:"6",rx:"1",key:"1ssd4o"}]],Ufe=ut("circle-stop",zfe);const Bfe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["path",{d:"m15 9-6 6",key:"1uzhvr"}],["path",{d:"m9 9 6 6",key:"z0biqf"}]],Da=ut("circle-x",Bfe);const Hfe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}]],cw=ut("circle",Hfe);const qfe=[["rect",{width:"8",height:"4",x:"8",y:"2",rx:"1",ry:"1",key:"tgr4d6"}],["path",{d:"M16 4h2a2 2 0 0 1 2 2v14a2 2 0 0 1-2 2H6a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h2",key:"116196"}],["path",{d:"M12 11h4",key:"1jrz19"}],["path",{d:"M12 16h4",key:"n85exb"}],["path",{d:"M8 11h.01",key:"1dfujw"}],["path",{d:"M8 16h.01",key:"18s6g9"}]],$fe=ut("clipboard-list",qfe);const Vfe=[["path",{d:"M12 6v6l4 2",key:"mmk7yg"}],["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}]],Yn=ut("clock",Vfe);const Gfe=[["path",{d:"m2 2 20 20",key:"1ooewy"}],["path",{d:"M5.782 5.782A7 7 0 0 0 9 19h8.5a4.5 4.5 0 0 0 1.307-.193",key:"yfwify"}],["path",{d:"M21.532 16.5A4.5 4.5 0 0 0 17.5 10h-1.79A7.008 7.008 0 0 0 10 5.07",key:"jlfiyv"}]],bF=ut("cloud-off",Gfe);const Wfe=[["path",{d:"M17.5 19H9a7 7 0 1 1 6.71-9h1.79a4.5 4.5 0 1 1 0 9Z",key:"p7xjir"}]],qg=ut("cloud",Wfe);const Kfe=[["path",{d:"m18 16 4-4-4-4",key:"1inbqp"}],["path",{d:"m6 8-4 4 4 4",key:"15zrgr"}],["path",{d:"m14.5 4-5 16",key:"e7oirm"}]],Xfe=ut("code-xml",Kfe);const Yfe=[["path",{d:"m16 18 6-6-6-6",key:"eg8j8"}],["path",{d:"m8 6-6 6 6 6",key:"ppft3o"}]],Py=ut("code",Yfe);const Qfe=[["path",{d:"M10 2v2",key:"7u0qdc"}],["path",{d:"M14 2v2",key:"6buw04"}],["path",{d:"M16 8a1 1 0 0 1 1 1v8a4 4 0 0 1-4 4H7a4 4 0 0 1-4-4V9a1 1 0 0 1 1-1h14a4 4 0 1 1 0 8h-1",key:"pwadti"}],["path",{d:"M6 2v2",key:"colzsn"}]],Jfe=ut("coffee",Qfe);const Zfe=[["circle",{cx:"8",cy:"8",r:"6",key:"3yglwk"}],["path",{d:"M18.09 10.37A6 6 0 1 1 10.34 18",key:"t5s6rm"}],["path",{d:"M7 6h1v4",key:"1obek4"}],["path",{d:"m16.71 13.88.7.71-2.82 2.82",key:"1rbuyh"}]],ege=ut("coins",Zfe);const tge=[["path",{d:"M11 10.27 7 3.34",key:"16pf9h"}],["path",{d:"m11 13.73-4 6.93",key:"794ttg"}],["path",{d:"M12 22v-2",key:"1osdcq"}],["path",{d:"M12 2v2",key:"tus03m"}],["path",{d:"M14 12h8",key:"4f43i9"}],["path",{d:"m17 20.66-1-1.73",key:"eq3orb"}],["path",{d:"m17 3.34-1 1.73",key:"2wel8s"}],["path",{d:"M2 12h2",key:"1t8f8n"}],["path",{d:"m20.66 17-1.73-1",key:"sg0v6f"}],["path",{d:"m20.66 7-1.73 1",key:"1ow05n"}],["path",{d:"m3.34 17 1.73-1",key:"nuk764"}],["path",{d:"m3.34 7 1.73 1",key:"1ulond"}],["circle",{cx:"12",cy:"12",r:"2",key:"1c9p78"}],["circle",{cx:"12",cy:"12",r:"8",key:"46899m"}]],Ud=ut("cog",tge);const nge=[["rect",{width:"18",height:"18",x:"3",y:"3",rx:"2",key:"afitv7"}],["path",{d:"M12 3v18",key:"108xh3"}]],rge=ut("columns-2",nge);const age=[["path",{d:"m16.24 7.76-1.804 5.411a2 2 0 0 1-1.265 1.265L7.76 16.24l1.804-5.411a2 2 0 0 1 1.265-1.265z",key:"9ktpf1"}],["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}]],ige=ut("compass",age);const sge=[["rect",{width:"14",height:"14",x:"8",y:"8",rx:"2",ry:"2",key:"17jyea"}],["path",{d:"M4 16c-1.1 0-2-.9-2-2V4c0-1.1.9-2 2-2h10c1.1 0 2 .9 2 2",key:"zix9uf"}]],ns=ut("copy",sge);const oge=[["path",{d:"M12 20v2",key:"1lh1kg"}],["path",{d:"M12 2v2",key:"tus03m"}],["path",{d:"M17 20v2",key:"1rnc9c"}],["path",{d:"M17 2v2",key:"11trls"}],["path",{d:"M2 12h2",key:"1t8f8n"}],["path",{d:"M2 17h2",key:"7oei6x"}],["path",{d:"M2 7h2",key:"asdhe0"}],["path",{d:"M20 12h2",key:"1q8mjw"}],["path",{d:"M20 17h2",key:"1fpfkl"}],["path",{d:"M20 7h2",key:"1o8tra"}],["path",{d:"M7 20v2",key:"4gnj0m"}],["path",{d:"M7 2v2",key:"1i4yhu"}],["rect",{x:"4",y:"4",width:"16",height:"16",rx:"2",key:"1vbyd7"}],["rect",{x:"8",y:"8",width:"8",height:"8",rx:"1",key:"z9xiuo"}]],f0=ut("cpu",oge);const lge=[["ellipse",{cx:"12",cy:"5",rx:"9",ry:"3",key:"msslwz"}],["path",{d:"M3 5v14a9 3 0 0 0 18 0V5",key:"aqi0yr"}]],cge=ut("cylinder",lge);const dge=[["ellipse",{cx:"12",cy:"5",rx:"9",ry:"3",key:"msslwz"}],["path",{d:"M3 5V19A9 3 0 0 0 21 19V5",key:"1wlel7"}],["path",{d:"M3 12A9 3 0 0 0 21 12",key:"mv7ke4"}]],Jl=ut("database",dge);const uge=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["path",{d:"M6 12c0-1.7.7-3.2 1.8-4.2",key:"oqkarx"}],["circle",{cx:"12",cy:"12",r:"2",key:"1c9p78"}],["path",{d:"M18 12c0 1.7-.7 3.2-1.8 4.2",key:"1eah9h"}]],mge=ut("disc-3",uge);const hge=[["line",{x1:"12",x2:"12",y1:"2",y2:"22",key:"7eqyqh"}],["path",{d:"M17 5H9.5a3.5 3.5 0 0 0 0 7h5a3.5 3.5 0 0 1 0 7H6",key:"1b0p4s"}]],CN=ut("dollar-sign",hge);const pge=[["path",{d:"M10 12h.01",key:"1kxr2c"}],["path",{d:"M18 20V6a2 2 0 0 0-2-2H8a2 2 0 0 0-2 2v14",key:"36qu9e"}],["path",{d:"M2 20h20",key:"owomy5"}]],fge=ut("door-closed",pge);const gge=[["path",{d:"M11 20H2",key:"nlcfvz"}],["path",{d:"M11 4.562v16.157a1 1 0 0 0 1.242.97L19 20V5.562a2 2 0 0 0-1.515-1.94l-4-1A2 2 0 0 0 11 4.561z",key:"au4z13"}],["path",{d:"M11 4H8a2 2 0 0 0-2 2v14",key:"74r1mk"}],["path",{d:"M14 12h.01",key:"1jfl7z"}],["path",{d:"M22 20h-3",key:"vhrsz"}]],bge=ut("door-open",gge);const xge=[["path",{d:"M12 15V3",key:"m9g1x1"}],["path",{d:"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4",key:"ih7n3h"}],["path",{d:"m7 10 5 5 5-5",key:"brsn70"}]],aa=ut("download",xge);const yge=[["path",{d:"M12 22a7 7 0 0 0 7-7c0-2-1-3.9-3-5.5s-3.5-4-4-6.5c-.5 2.5-2 4.9-4 6.5C6 11.1 5 13 5 15a7 7 0 0 0 7 7z",key:"c7niix"}]],QP=ut("droplet",yge);const vge=[["path",{d:"M7 16.3c2.2 0 4-1.83 4-4.05 0-1.16-.57-2.26-1.71-3.19S7.29 6.75 7 5.3c-.29 1.45-1.14 2.84-2.29 3.76S3 11.1 3 12.25c0 2.22 1.8 4.05 4 4.05z",key:"1ptgy4"}],["path",{d:"M12.56 6.6A10.97 10.97 0 0 0 14 3.02c.5 2.5 2 4.9 4 6.5s3 3.5 3 5.5a6.98 6.98 0 0 1-11.91 4.97",key:"1sl1rz"}]],QI=ut("droplets",vge);const wge=[["circle",{cx:"12",cy:"12",r:"1",key:"41hilf"}],["circle",{cx:"12",cy:"5",r:"1",key:"gxeob9"}],["circle",{cx:"12",cy:"19",r:"1",key:"lyex9k"}]],ip=ut("ellipsis-vertical",wge);const Sge=[["line",{x1:"5",x2:"19",y1:"9",y2:"9",key:"1nwqeh"}],["line",{x1:"5",x2:"19",y1:"15",y2:"15",key:"g8yjpy"}]],OM=ut("equal",Sge);const _ge=[["path",{d:"M21 21H8a2 2 0 0 1-1.42-.587l-3.994-3.999a2 2 0 0 1 0-2.828l10-10a2 2 0 0 1 2.829 0l5.999 6a2 2 0 0 1 0 2.828L12.834 21",key:"g5wo59"}],["path",{d:"m5.082 11.09 8.828 8.828",key:"1wx5vj"}]],kge=ut("eraser",_ge);const Nge=[["path",{d:"M15 3h6v6",key:"1q9fwt"}],["path",{d:"M10 14 21 3",key:"gplh6r"}],["path",{d:"M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6",key:"a6xqqp"}]],Ar=ut("external-link",Nge);const Cge=[["path",{d:"M10.733 5.076a10.744 10.744 0 0 1 11.205 6.575 1 1 0 0 1 0 .696 10.747 10.747 0 0 1-1.444 2.49",key:"ct8e1f"}],["path",{d:"M14.084 14.158a3 3 0 0 1-4.242-4.242",key:"151rxh"}],["path",{d:"M17.479 17.499a10.75 10.75 0 0 1-15.417-5.151 1 1 0 0 1 0-.696 10.75 10.75 0 0 1 4.446-5.143",key:"13bj9a"}],["path",{d:"m2 2 20 20",key:"1ooewy"}]],$g=ut("eye-off",Cge);const Pge=[["path",{d:"M2.062 12.348a1 1 0 0 1 0-.696 10.75 10.75 0 0 1 19.876 0 1 1 0 0 1 0 .696 10.75 10.75 0 0 1-19.876 0",key:"1nclc0"}],["circle",{cx:"12",cy:"12",r:"3",key:"1v7zrd"}]],pl=ut("eye",Pge);const Tge=[["path",{d:"M10.827 16.379a6.082 6.082 0 0 1-8.618-7.002l5.412 1.45a6.082 6.082 0 0 1 7.002-8.618l-1.45 5.412a6.082 6.082 0 0 1 8.618 7.002l-5.412-1.45a6.082 6.082 0 0 1-7.002 8.618l1.45-5.412Z",key:"484a7f"}],["path",{d:"M12 12v.01",key:"u5ubse"}]],aJ=ut("fan",Tge);const Age=[["path",{d:"M14.5 22H18a2 2 0 0 0 2-2V8a2.4 2.4 0 0 0-.706-1.706l-3.588-3.588A2.4 2.4 0 0 0 14 2H6a2 2 0 0 0-2 2v3.8",key:"1kchwa"}],["path",{d:"M14 2v5a1 1 0 0 0 1 1h5",key:"wfsgrz"}],["path",{d:"M11.7 14.2 7 17l-4.7-2.8",key:"1yk8tc"}],["path",{d:"M3 13.1a2 2 0 0 0-.999 1.76v3.24a2 2 0 0 0 .969 1.78L6 21.7a2 2 0 0 0 2.03.01L11 19.9a2 2 0 0 0 1-1.76V14.9a2 2 0 0 0-.97-1.78L8 11.3a2 2 0 0 0-2.03-.01z",key:"19flxy"}],["path",{d:"M7 17v5",key:"1yj1jh"}]],sp=ut("file-box",Age);const jge=[["path",{d:"M6 22a2 2 0 0 1-2-2V4a2 2 0 0 1 2-2h8a2.4 2.4 0 0 1 1.704.706l3.588 3.588A2.4 2.4 0 0 1 20 8v12a2 2 0 0 1-2 2z",key:"1oefj6"}],["path",{d:"M14 2v5a1 1 0 0 0 1 1h5",key:"wfsgrz"}],["path",{d:"M10 12.5 8 15l2 2.5",key:"1tg20x"}],["path",{d:"m14 12.5 2 2.5-2 2.5",key:"yinavb"}]],PN=ut("file-code",jge);const Mge=[["path",{d:"M6 22a2 2 0 0 1-2-2V4a2 2 0 0 1 2-2h8a2.4 2.4 0 0 1 1.704.706l3.588 3.588A2.4 2.4 0 0 1 20 8v12a2 2 0 0 1-2 2z",key:"1oefj6"}],["path",{d:"M12 9v4",key:"juzpu7"}],["path",{d:"M12 17h.01",key:"p32p05"}]],Ege=ut("file-exclamation-point",Mge);const Dge=[["path",{d:"M6 22a2 2 0 0 1-2-2V4a2 2 0 0 1 2-2h8a2.4 2.4 0 0 1 1.704.706l3.588 3.588A2.4 2.4 0 0 1 20 8v12a2 2 0 0 1-2 2z",key:"1oefj6"}],["path",{d:"M14 2v5a1 1 0 0 0 1 1h5",key:"wfsgrz"}],["path",{d:"M8 13h2",key:"yr2amv"}],["path",{d:"M14 13h2",key:"un5t4a"}],["path",{d:"M8 17h2",key:"2yhykz"}],["path",{d:"M14 17h2",key:"10kma7"}]],TN=ut("file-spreadsheet",Dge);const Fge=[["path",{d:"M6 22a2 2 0 0 1-2-2V4a2 2 0 0 1 2-2h8a2.4 2.4 0 0 1 1.704.706l3.588 3.588A2.4 2.4 0 0 1 20 8v12a2 2 0 0 1-2 2z",key:"1oefj6"}],["path",{d:"M14 2v5a1 1 0 0 0 1 1h5",key:"wfsgrz"}],["path",{d:"M10 9H8",key:"b1mrlr"}],["path",{d:"M16 13H8",key:"t4e002"}],["path",{d:"M16 17H8",key:"z1uh3a"}]],Ns=ut("file-text",Fge);const Rge=[["path",{d:"M6 22a2 2 0 0 1-2-2V4a2 2 0 0 1 2-2h8a2.4 2.4 0 0 1 1.704.706l3.588 3.588A2.4 2.4 0 0 1 20 8v12a2 2 0 0 1-2 2z",key:"1oefj6"}],["path",{d:"M14 2v5a1 1 0 0 0 1 1h5",key:"wfsgrz"}]],JP=ut("file",Rge);const Lge=[["rect",{width:"18",height:"18",x:"3",y:"3",rx:"2",key:"afitv7"}],["path",{d:"M7 3v18",key:"bbkbws"}],["path",{d:"M3 7.5h4",key:"zfgn84"}],["path",{d:"M3 12h18",key:"1i2n21"}],["path",{d:"M3 16.5h4",key:"1230mu"}],["path",{d:"M17 3v18",key:"in4fa5"}],["path",{d:"M17 7.5h4",key:"myr1c1"}],["path",{d:"M17 16.5h4",key:"go4c1d"}]],op=ut("film",Lge);const Ige=[["path",{d:"M12 3q1 4 4 6.5t3 5.5a1 1 0 0 1-14 0 5 5 0 0 1 1-3 1 1 0 0 0 5 0c0-2-1.5-3-1.5-5q0-2 2.5-4",key:"1slcih"}]],qu=ut("flame",Ige);const Oge=[["circle",{cx:"15",cy:"19",r:"2",key:"u2pros"}],["path",{d:"M20.9 19.8A2 2 0 0 0 22 18V8a2 2 0 0 0-2-2h-7.9a2 2 0 0 1-1.69-.9L9.6 3.9A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13a2 2 0 0 0 2 2h5.1",key:"1jj40k"}],["path",{d:"M15 11v-1",key:"cntcp"}],["path",{d:"M15 17v-2",key:"1279jj"}]],zge=ut("folder-archive",Oge);const Uge=[["path",{d:"M4 20h16a2 2 0 0 0 2-2V8a2 2 0 0 0-2-2h-7.93a2 2 0 0 1-1.66-.9l-.82-1.2A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13c0 1.1.9 2 2 2Z",key:"1fr9dc"}],["path",{d:"M8 10v4",key:"tgpxqk"}],["path",{d:"M12 10v2",key:"hh53o1"}],["path",{d:"M16 10v6",key:"1d6xys"}]],$s=ut("folder-kanban",Uge);const Bge=[["path",{d:"m6 14 1.5-2.9A2 2 0 0 1 9.24 10H20a2 2 0 0 1 1.94 2.5l-1.54 6a2 2 0 0 1-1.95 1.5H4a2 2 0 0 1-2-2V5a2 2 0 0 1 2-2h3.9a2 2 0 0 1 1.69.9l.81 1.2a2 2 0 0 0 1.67.9H18a2 2 0 0 1 2 2v2",key:"usdka0"}]],fl=ut("folder-open",Bge);const Hge=[["path",{d:"M12 10v6",key:"1bos4e"}],["path",{d:"M9 13h6",key:"1uhe8q"}],["path",{d:"M20 20a2 2 0 0 0 2-2V8a2 2 0 0 0-2-2h-7.9a2 2 0 0 1-1.69-.9L9.6 3.9A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13a2 2 0 0 0 2 2Z",key:"1kt360"}]],qge=ut("folder-plus",Hge);const $ge=[["path",{d:"M2 9.35V5a2 2 0 0 1 2-2h3.9a2 2 0 0 1 1.69.9l.81 1.2a2 2 0 0 0 1.67.9H20a2 2 0 0 1 2 2v10a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2v-3a2 2 0 0 1 2-2h7",key:"y8kt7d"}],["path",{d:"m8 16 3-3-3-3",key:"rlqrt1"}]],AN=ut("folder-symlink",$ge);const Vge=[["path",{d:"M20 10a1 1 0 0 0 1-1V6a1 1 0 0 0-1-1h-2.5a1 1 0 0 1-.8-.4l-.9-1.2A1 1 0 0 0 15 3h-2a1 1 0 0 0-1 1v5a1 1 0 0 0 1 1Z",key:"hod4my"}],["path",{d:"M20 21a1 1 0 0 0 1-1v-3a1 1 0 0 0-1-1h-2.9a1 1 0 0 1-.88-.55l-.42-.85a1 1 0 0 0-.92-.6H13a1 1 0 0 0-1 1v5a1 1 0 0 0 1 1Z",key:"w4yl2u"}],["path",{d:"M3 5a2 2 0 0 0 2 2h3",key:"f2jnh7"}],["path",{d:"M3 3v13a2 2 0 0 0 2 2h3",key:"k8epm1"}]],Gge=ut("folder-tree",Vge);const Wge=[["path",{d:"M20 20a2 2 0 0 0 2-2V8a2 2 0 0 0-2-2h-7.9a2 2 0 0 1-1.69-.9L9.6 3.9A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13a2 2 0 0 0 2 2Z",key:"1kt360"}]],iJ=ut("folder",Wge);const Kge=[["path",{d:"M3 7V5a2 2 0 0 1 2-2h2",key:"aa7l1z"}],["path",{d:"M17 3h2a2 2 0 0 1 2 2v2",key:"4qcy5o"}],["path",{d:"M21 17v2a2 2 0 0 1-2 2h-2",key:"6vwrx8"}],["path",{d:"M7 21H5a2 2 0 0 1-2-2v-2",key:"ioqczr"}],["rect",{width:"10",height:"8",x:"7",y:"8",rx:"1",key:"vys8me"}]],Xge=ut("fullscreen",Kge);const Yge=[["path",{d:"M10 20a1 1 0 0 0 .553.895l2 1A1 1 0 0 0 14 21v-7a2 2 0 0 1 .517-1.341L21.74 4.67A1 1 0 0 0 21 3H3a1 1 0 0 0-.742 1.67l7.225 7.989A2 2 0 0 1 10 14z",key:"sc7q7i"}]],ZP=ut("funnel",Yge);const Qge=[["path",{d:"m12 14 4-4",key:"9kzdfg"}],["path",{d:"M3.34 19a10 10 0 1 1 17.32 0",key:"19p75a"}]],aS=ut("gauge",Qge);const Jge=[["rect",{x:"3",y:"8",width:"18",height:"4",rx:"1",key:"bkv52"}],["path",{d:"M12 8v13",key:"1c76mn"}],["path",{d:"M19 12v7a2 2 0 0 1-2 2H7a2 2 0 0 1-2-2v-7",key:"6wjy6b"}],["path",{d:"M7.5 8a2.5 2.5 0 0 1 0-5A4.8 8 0 0 1 12 8a4.8 8 0 0 1 4.5-5 2.5 2.5 0 0 1 0 5",key:"1ihvrl"}]],Zge=ut("gift",Jge);const ebe=[["line",{x1:"6",x2:"6",y1:"3",y2:"15",key:"17qcm7"}],["circle",{cx:"18",cy:"6",r:"3",key:"1h7g24"}],["circle",{cx:"6",cy:"18",r:"3",key:"fqmcym"}],["path",{d:"M18 9a9 9 0 0 1-9 9",key:"n2h4wq"}]],sJ=ut("git-branch",ebe);const tbe=[["circle",{cx:"18",cy:"18",r:"3",key:"1xkwt0"}],["circle",{cx:"6",cy:"6",r:"3",key:"1lh9wr"}],["path",{d:"M13 6h3a2 2 0 0 1 2 2v7",key:"1yeb86"}],["path",{d:"M11 18H8a2 2 0 0 1-2-2V9",key:"19pyzm"}]],Rx=ut("git-compare",tbe);const nbe=[["path",{d:"M15 22v-4a4.8 4.8 0 0 0-1-3.5c3 0 6-2 6-5.5.08-1.25-.27-2.48-1-3.5.28-1.15.28-2.35 0-3.5 0 0-1 0-3 1.5-2.64-.5-5.36-.5-8 0C6 2 5 2 5 2c-.3 1.15-.3 2.35 0 3.5A5.403 5.403 0 0 0 4 9c0 3.5 3 5.5 6 5.5-.39.49-.68 1.05-.85 1.65-.17.6-.22 1.23-.15 1.85v4",key:"tonef"}],["path",{d:"M9 18c-4.51 2-5-2-7-2",key:"9comsn"}]],xF=ut("github",nbe);const rbe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["path",{d:"M12 2a14.5 14.5 0 0 0 0 20 14.5 14.5 0 0 0 0-20",key:"13o1zl"}],["path",{d:"M2 12h20",key:"9i4pu4"}]],qs=ut("globe",rbe);const abe=[["circle",{cx:"9",cy:"12",r:"1",key:"1vctgf"}],["circle",{cx:"9",cy:"5",r:"1",key:"hp0tcf"}],["circle",{cx:"9",cy:"19",r:"1",key:"fkjjf6"}],["circle",{cx:"15",cy:"12",r:"1",key:"1tmaij"}],["circle",{cx:"15",cy:"5",r:"1",key:"19l28e"}],["circle",{cx:"15",cy:"19",r:"1",key:"f4zoj3"}]],lp=ut("grip-vertical",abe);const ibe=[["path",{d:"M3 7V5c0-1.1.9-2 2-2h2",key:"adw53z"}],["path",{d:"M17 3h2c1.1 0 2 .9 2 2v2",key:"an4l38"}],["path",{d:"M21 17v2c0 1.1-.9 2-2 2h-2",key:"144t0e"}],["path",{d:"M7 21H5c-1.1 0-2-.9-2-2v-2",key:"rtnfgi"}],["rect",{width:"7",height:"5",x:"7",y:"7",rx:"1",key:"1eyiv7"}],["rect",{width:"7",height:"5",x:"10",y:"12",rx:"1",key:"1qlmkx"}]],sbe=ut("group",ibe);const obe=[["path",{d:"M18 11V6a2 2 0 0 0-2-2a2 2 0 0 0-2 2",key:"1fvzgz"}],["path",{d:"M14 10V4a2 2 0 0 0-2-2a2 2 0 0 0-2 2v2",key:"1kc0my"}],["path",{d:"M10 10.5V6a2 2 0 0 0-2-2a2 2 0 0 0-2 2v8",key:"10h0bg"}],["path",{d:"M18 8a2 2 0 1 1 4 0v6a8 8 0 0 1-8 8h-2c-2.8 0-4.5-.86-5.99-2.34l-3.6-3.6a2 2 0 0 1 2.83-2.82L7 15",key:"1s1gnw"}]],oJ=ut("hand",obe);const lbe=[["line",{x1:"22",x2:"2",y1:"12",y2:"12",key:"1y58io"}],["path",{d:"M5.45 5.11 2 12v6a2 2 0 0 0 2 2h16a2 2 0 0 0 2-2v-6l-3.45-6.89A2 2 0 0 0 16.76 4H7.24a2 2 0 0 0-1.79 1.11z",key:"oot6mr"}],["line",{x1:"6",x2:"6.01",y1:"16",y2:"16",key:"sgf278"}],["line",{x1:"10",x2:"10.01",y1:"16",y2:"16",key:"1l4acy"}]],Vg=ut("hard-drive",lbe);const cbe=[["line",{x1:"4",x2:"20",y1:"9",y2:"9",key:"4lhtct"}],["line",{x1:"4",x2:"20",y1:"15",y2:"15",key:"vyu0kd"}],["line",{x1:"10",x2:"8",y1:"3",y2:"21",key:"1ggp8o"}],["line",{x1:"16",x2:"14",y1:"3",y2:"21",key:"weycgp"}]],dbe=ut("hash",cbe);const ube=[["path",{d:"M3 14h3a2 2 0 0 1 2 2v3a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-7a9 9 0 0 1 18 0v7a2 2 0 0 1-2 2h-1a2 2 0 0 1-2-2v-3a2 2 0 0 1 2-2h3",key:"1xhozi"}]],mbe=ut("headphones",ube);const hbe=[["path",{d:"M2 9.5a5.5 5.5 0 0 1 9.591-3.676.56.56 0 0 0 .818 0A5.49 5.49 0 0 1 22 9.5c0 2.29-1.5 4-3 5.5l-5.492 5.313a2 2 0 0 1-3 .019L5 15c-1.5-1.5-3-3.2-3-5.5",key:"mvr1a0"}]],pbe=ut("heart",hbe);const fbe=[["path",{d:"M3 12a9 9 0 1 0 9-9 9.75 9.75 0 0 0-6.74 2.74L3 8",key:"1357e3"}],["path",{d:"M3 3v5h5",key:"1xhq8a"}],["path",{d:"M12 7v5l4 2",key:"1fdv2h"}]],dw=ut("history",fbe);const gbe=[["path",{d:"M15 21v-8a1 1 0 0 0-1-1h-4a1 1 0 0 0-1 1v8",key:"5wwlr5"}],["path",{d:"M3 10a2 2 0 0 1 .709-1.528l7-6a2 2 0 0 1 2.582 0l7 6A2 2 0 0 1 21 10v9a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z",key:"r6nss1"}]],iS=ut("house",gbe);const bbe=[["rect",{width:"18",height:"18",x:"3",y:"3",rx:"2",ry:"2",key:"1m3agn"}],["circle",{cx:"9",cy:"9",r:"2",key:"af1f0g"}],["path",{d:"m21 15-3.086-3.086a2 2 0 0 0-2.828 0L6 21",key:"1xmnt7"}]],Bd=ut("image",bbe);const xbe=[["path",{d:"m22 11-1.296-1.296a2.4 2.4 0 0 0-3.408 0L11 16",key:"9kzy35"}],["path",{d:"M4 8a2 2 0 0 0-2 2v10a2 2 0 0 0 2 2h10a2 2 0 0 0 2-2",key:"1t0f0t"}],["circle",{cx:"13",cy:"7",r:"1",fill:"currentColor",key:"1obus6"}],["rect",{x:"8",y:"2",width:"14",height:"14",rx:"2",key:"1gvhby"}]],ybe=ut("images",xbe);const vbe=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["path",{d:"M12 16v-4",key:"1dtifu"}],["path",{d:"M12 8h.01",key:"e9boi3"}]],Cs=ut("info",vbe);const wbe=[["line",{x1:"19",x2:"10",y1:"4",y2:"4",key:"15jd3p"}],["line",{x1:"14",x2:"5",y1:"20",y2:"20",key:"bu0au3"}],["line",{x1:"15",x2:"9",y1:"4",y2:"20",key:"uljnxc"}]],Sbe=ut("italic",wbe);const _be=[["path",{d:"m15.5 7.5 2.3 2.3a1 1 0 0 0 1.4 0l2.1-2.1a1 1 0 0 0 0-1.4L19 4",key:"g0fldk"}],["path",{d:"m21 2-9.6 9.6",key:"1j0ho8"}],["circle",{cx:"7.5",cy:"15.5",r:"5.5",key:"yqb3hr"}]],ao=ut("key",_be);const kbe=[["path",{d:"M10 8h.01",key:"1r9ogq"}],["path",{d:"M12 12h.01",key:"1mp3jc"}],["path",{d:"M14 8h.01",key:"1primd"}],["path",{d:"M16 12h.01",key:"1l6xoz"}],["path",{d:"M18 8h.01",key:"emo2bl"}],["path",{d:"M6 8h.01",key:"x9i8wu"}],["path",{d:"M7 16h10",key:"wp8him"}],["path",{d:"M8 12h.01",key:"czm47f"}],["rect",{width:"20",height:"16",x:"2",y:"4",rx:"2",key:"18n3k1"}]],yF=ut("keyboard",kbe);const Nbe=[["path",{d:"M12.83 2.18a2 2 0 0 0-1.66 0L2.6 6.08a1 1 0 0 0 0 1.83l8.58 3.91a2 2 0 0 0 1.66 0l8.58-3.9a1 1 0 0 0 0-1.83z",key:"zw3jo"}],["path",{d:"M2 12a1 1 0 0 0 .58.91l8.6 3.91a2 2 0 0 0 1.65 0l8.58-3.9A1 1 0 0 0 22 12",key:"1wduqc"}],["path",{d:"M2 17a1 1 0 0 0 .58.91l8.6 3.91a2 2 0 0 0 1.65 0l8.58-3.9A1 1 0 0 0 22 17",key:"kqbvx6"}]],ia=ut("layers",Nbe);const Cbe=[["rect",{width:"7",height:"7",x:"3",y:"3",rx:"1",key:"1g98yp"}],["rect",{width:"7",height:"7",x:"14",y:"3",rx:"1",key:"6d4xhi"}],["rect",{width:"7",height:"7",x:"14",y:"14",rx:"1",key:"nxv5o0"}],["rect",{width:"7",height:"7",x:"3",y:"14",rx:"1",key:"1bb6yr"}]],sS=ut("layout-grid",Cbe);const Pbe=[["path",{d:"M9 17H7A5 5 0 0 1 7 7",key:"10o201"}],["path",{d:"M15 7h2a5 5 0 0 1 4 8",key:"1d3206"}],["line",{x1:"8",x2:"12",y1:"12",y2:"12",key:"rvw6j4"}],["line",{x1:"2",x2:"22",y1:"2",y2:"22",key:"a6p6uj"}]],Tbe=ut("link-2-off",Pbe);const Abe=[["path",{d:"M9 17H7A5 5 0 0 1 7 7h2",key:"8i5ue5"}],["path",{d:"M15 7h2a5 5 0 1 1 0 10h-2",key:"1b9ql8"}],["line",{x1:"8",x2:"16",y1:"12",y2:"12",key:"1jonct"}]],lm=ut("link-2",Abe);const jbe=[["path",{d:"M10 13a5 5 0 0 0 7.54.54l3-3a5 5 0 0 0-7.07-7.07l-1.72 1.71",key:"1cjeqo"}],["path",{d:"M14 11a5 5 0 0 0-7.54-.54l-3 3a5 5 0 0 0 7.07 7.07l1.71-1.71",key:"19qd67"}]],Ty=ut("link",jbe);const Mbe=[["path",{d:"M11 5h10",key:"1cz7ny"}],["path",{d:"M11 12h10",key:"1438ji"}],["path",{d:"M11 19h10",key:"11t30w"}],["path",{d:"M4 4h1v5",key:"10yrso"}],["path",{d:"M4 9h2",key:"r1h2o0"}],["path",{d:"M6.5 20H3.4c0-1 2.6-1.925 2.6-3.5a1.5 1.5 0 0 0-2.6-1.02",key:"xtkcd5"}]],jN=ut("list-ordered",Mbe);const Ebe=[["path",{d:"M13 5h8",key:"a7qcls"}],["path",{d:"M13 12h8",key:"h98zly"}],["path",{d:"M13 19h8",key:"c3s6r1"}],["path",{d:"m3 17 2 2 4-4",key:"1jhpwq"}],["rect",{x:"3",y:"4",width:"6",height:"6",rx:"1",key:"cif1o7"}]],vF=ut("list-todo",Ebe);const Dbe=[["path",{d:"M3 5h.01",key:"18ugdj"}],["path",{d:"M3 12h.01",key:"nlz23k"}],["path",{d:"M3 19h.01",key:"noohij"}],["path",{d:"M8 5h13",key:"1pao27"}],["path",{d:"M8 12h13",key:"1za7za"}],["path",{d:"M8 19h13",key:"m83p4d"}]],oS=ut("list",Dbe);const Fbe=[["path",{d:"M21 12a9 9 0 1 1-6.219-8.56",key:"13zald"}]],mt=ut("loader-circle",Fbe);const Rbe=[["rect",{width:"18",height:"11",x:"3",y:"11",rx:"2",ry:"2",key:"1w4ew1"}],["path",{d:"M7 11V7a5 5 0 0 1 9.9-1",key:"1mm8w8"}]],D0=ut("lock-open",Rbe);const Lbe=[["rect",{width:"18",height:"11",x:"3",y:"11",rx:"2",ry:"2",key:"1w4ew1"}],["path",{d:"M7 11V7a5 5 0 0 1 10 0v4",key:"fwvmzm"}]],Nd=ut("lock",Lbe);const Ibe=[["path",{d:"m10 17 5-5-5-5",key:"1bsop3"}],["path",{d:"M15 12H3",key:"6jk70r"}],["path",{d:"M15 3h4a2 2 0 0 1 2 2v14a2 2 0 0 1-2 2h-4",key:"u53s6r"}]],VH=ut("log-in",Ibe);const Obe=[["path",{d:"m16 17 5-5-5-5",key:"1bji2h"}],["path",{d:"M21 12H9",key:"dn1m92"}],["path",{d:"M9 21H5a2 2 0 0 1-2-2V5a2 2 0 0 1 2-2h4",key:"1uf3rs"}]],wF=ut("log-out",Obe);const zbe=[["path",{d:"m22 7-8.991 5.727a2 2 0 0 1-2.009 0L2 7",key:"132q7q"}],["rect",{x:"2",y:"4",width:"20",height:"16",rx:"2",key:"izxlao"}]],xm=ut("mail",zbe);const Ube=[["path",{d:"M14.106 5.553a2 2 0 0 0 1.788 0l3.659-1.83A1 1 0 0 1 21 4.619v12.764a1 1 0 0 1-.553.894l-4.553 2.277a2 2 0 0 1-1.788 0l-4.212-2.106a2 2 0 0 0-1.788 0l-3.659 1.83A1 1 0 0 1 3 19.381V6.618a1 1 0 0 1 .553-.894l4.553-2.277a2 2 0 0 1 1.788 0z",key:"169xi5"}],["path",{d:"M15 5.764v15",key:"1pn4in"}],["path",{d:"M9 3.236v15",key:"1uimfh"}]],Bbe=ut("map",Ube);const Hbe=[["path",{d:"M15 3h6v6",key:"1q9fwt"}],["path",{d:"m21 3-7 7",key:"1l2asr"}],["path",{d:"m3 21 7-7",key:"tjx5ai"}],["path",{d:"M9 21H3v-6",key:"wtvkvv"}]],eT=ut("maximize-2",Hbe);const qbe=[["path",{d:"M8 3H5a2 2 0 0 0-2 2v3",key:"1dcmit"}],["path",{d:"M21 8V5a2 2 0 0 0-2-2h-3",key:"1e4gt3"}],["path",{d:"M3 16v3a2 2 0 0 0 2 2h3",key:"wsl5sc"}],["path",{d:"M16 21h3a2 2 0 0 0 2-2v-3",key:"18trek"}]],$be=ut("maximize",qbe);const Vbe=[["path",{d:"M6 19v-3",key:"1nvgqn"}],["path",{d:"M10 19v-3",key:"iu8nkm"}],["path",{d:"M14 19v-3",key:"kcehxu"}],["path",{d:"M18 19v-3",key:"1vh91z"}],["path",{d:"M8 11V9",key:"63erz4"}],["path",{d:"M16 11V9",key:"fru6f3"}],["path",{d:"M12 11V9",key:"ha00sb"}],["path",{d:"M2 15h20",key:"16ne18"}],["path",{d:"M2 7a2 2 0 0 1 2-2h16a2 2 0 0 1 2 2v1.1a2 2 0 0 0 0 3.837V17a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2v-5.1a2 2 0 0 0 0-3.837Z",key:"lhddv3"}]],Gbe=ut("memory-stick",Vbe);const Wbe=[["path",{d:"M4 5h16",key:"1tepv9"}],["path",{d:"M4 12h16",key:"1lakjw"}],["path",{d:"M4 19h16",key:"1djgab"}]],Kbe=ut("menu",Wbe);const Xbe=[["path",{d:"m14 10 7-7",key:"oa77jy"}],["path",{d:"M20 10h-6V4",key:"mjg0md"}],["path",{d:"m3 21 7-7",key:"tjx5ai"}],["path",{d:"M4 14h6v6",key:"rmj7iw"}]],JI=ut("minimize-2",Xbe);const Ybe=[["path",{d:"M8 3v3a2 2 0 0 1-2 2H3",key:"hohbtr"}],["path",{d:"M21 8h-3a2 2 0 0 1-2-2V3",key:"5jw1f3"}],["path",{d:"M3 16h3a2 2 0 0 1 2 2v3",key:"198tvr"}],["path",{d:"M16 21v-3a2 2 0 0 1 2-2h3",key:"ph8mxp"}]],lJ=ut("minimize",Ybe);const Qbe=[["path",{d:"M5 12h14",key:"1ays0h"}]],MN=ut("minus",Qbe);const Jbe=[["rect",{width:"20",height:"14",x:"2",y:"3",rx:"2",key:"48i651"}],["line",{x1:"8",x2:"16",y1:"21",y2:"21",key:"1svkeh"}],["line",{x1:"12",x2:"12",y1:"17",y2:"21",key:"vw1qmm"}]],ZI=ut("monitor",Jbe);const Zbe=[["path",{d:"M20.985 12.486a9 9 0 1 1-9.473-9.472c.405-.022.617.46.402.803a6 6 0 0 0 8.268 8.268c.344-.215.825-.004.803.401",key:"kfwtm"}]],EN=ut("moon",Zbe);const exe=[["path",{d:"M18 8L22 12L18 16",key:"1r0oui"}],["path",{d:"M2 12H22",key:"1m8cig"}]],txe=ut("move-right",exe);const nxe=[["path",{d:"M12 2v20",key:"t6zp3m"}],["path",{d:"m8 18 4 4 4-4",key:"bh5tu3"}],["path",{d:"m8 6 4-4 4 4",key:"ybng9g"}]],rxe=ut("move-vertical",nxe);const axe=[["path",{d:"M9 18V5l12-2v13",key:"1jmyc2"}],["circle",{cx:"6",cy:"18",r:"3",key:"fqmcym"}],["circle",{cx:"18",cy:"16",r:"3",key:"1hluhg"}]],SF=ut("music",axe);const ixe=[["path",{d:"M11 21.73a2 2 0 0 0 2 0l7-4A2 2 0 0 0 21 16V8a2 2 0 0 0-1-1.73l-7-4a2 2 0 0 0-2 0l-7 4A2 2 0 0 0 3 8v8a2 2 0 0 0 1 1.73z",key:"1a0edw"}],["path",{d:"M12 22V12",key:"d0xqtd"}],["polyline",{points:"3.29 7 12 12 20.71 7",key:"ousv84"}],["path",{d:"m7.5 4.27 9 5.15",key:"1c824w"}]],Za=ut("package",ixe);const sxe=[["path",{d:"M12 22a1 1 0 0 1 0-20 10 9 0 0 1 10 9 5 5 0 0 1-5 5h-2.25a1.75 1.75 0 0 0-1.4 2.8l.3.4a1.75 1.75 0 0 1-1.4 2.8z",key:"e79jfc"}],["circle",{cx:"13.5",cy:"6.5",r:".5",fill:"currentColor",key:"1okk4w"}],["circle",{cx:"17.5",cy:"10.5",r:".5",fill:"currentColor",key:"f64h9f"}],["circle",{cx:"6.5",cy:"12.5",r:".5",fill:"currentColor",key:"qy21gx"}],["circle",{cx:"8.5",cy:"7.5",r:".5",fill:"currentColor",key:"fotxhn"}]],lS=ut("palette",sxe);const oxe=[["rect",{x:"14",y:"3",width:"5",height:"18",rx:"1",key:"kaeet6"}],["rect",{x:"5",y:"3",width:"5",height:"18",rx:"1",key:"1wsw3u"}]],cS=ut("pause",oxe);const lxe=[["path",{d:"M13 21h8",key:"1jsn5i"}],["path",{d:"M21.174 6.812a1 1 0 0 0-3.986-3.987L3.842 16.174a2 2 0 0 0-.5.83l-1.321 4.352a.5.5 0 0 0 .623.622l4.353-1.32a2 2 0 0 0 .83-.497z",key:"1a8usu"}]],fg=ut("pen-line",lxe);const cxe=[["path",{d:"M21.174 6.812a1 1 0 0 0-3.986-3.987L3.842 16.174a2 2 0 0 0-.5.83l-1.321 4.352a.5.5 0 0 0 .623.622l4.353-1.32a2 2 0 0 0 .83-.497z",key:"1a8usu"}]],Ju=ut("pen",cxe);const dxe=[["path",{d:"M21.174 6.812a1 1 0 0 0-3.986-3.987L3.842 16.174a2 2 0 0 0-.5.83l-1.321 4.352a.5.5 0 0 0 .623.622l4.353-1.32a2 2 0 0 0 .83-.497z",key:"1a8usu"}],["path",{d:"m15 5 4 4",key:"1mk7zo"}]],li=ut("pencil",dxe);const uxe=[["path",{d:"M13.832 16.568a1 1 0 0 0 1.213-.303l.355-.465A2 2 0 0 1 17 15h3a2 2 0 0 1 2 2v3a2 2 0 0 1-2 2A18 18 0 0 1 2 4a2 2 0 0 1 2-2h3a2 2 0 0 1 2 2v3a2 2 0 0 1-.8 1.6l-.468.351a1 1 0 0 0-.292 1.233 14 14 0 0 0 6.392 6.384",key:"9njp5v"}]],mxe=ut("phone",uxe);const hxe=[["path",{d:"M5 5a2 2 0 0 1 3.008-1.728l11.997 6.998a2 2 0 0 1 .003 3.458l-12 7A2 2 0 0 1 5 19z",key:"10ikf1"}]],rs=ut("play",hxe);const pxe=[["path",{d:"M12 22v-5",key:"1ega77"}],["path",{d:"M9 8V2",key:"14iosj"}],["path",{d:"M15 8V2",key:"18g5xt"}],["path",{d:"M18 8v5a4 4 0 0 1-4 4h-4a4 4 0 0 1-4-4V8Z",key:"osxo6l"}]],tc=ut("plug",pxe);const fxe=[["path",{d:"M5 12h14",key:"1ays0h"}],["path",{d:"M12 5v14",key:"s699le"}]],nr=ut("plus",fxe);const gxe=[["path",{d:"M18.36 6.64A9 9 0 0 1 20.77 15",key:"dxknvb"}],["path",{d:"M6.16 6.16a9 9 0 1 0 12.68 12.68",key:"1x7qb5"}],["path",{d:"M12 2v4",key:"3427ic"}],["path",{d:"m2 2 20 20",key:"1ooewy"}]],dS=ut("power-off",gxe);const bxe=[["path",{d:"M12 2v10",key:"mnfbl"}],["path",{d:"M18.4 6.6a9 9 0 1 1-12.77.04",key:"obofu9"}]],Jd=ut("power",bxe);const xxe=[["path",{d:"M6 18H4a2 2 0 0 1-2-2v-5a2 2 0 0 1 2-2h16a2 2 0 0 1 2 2v5a2 2 0 0 1-2 2h-2",key:"143wyd"}],["path",{d:"M6 9V3a1 1 0 0 1 1-1h10a1 1 0 0 1 1 1v6",key:"1itne7"}],["rect",{x:"6",y:"14",width:"12",height:"8",rx:"1",key:"1ue0tg"}]],Mr=ut("printer",xxe);const yxe=[["rect",{width:"5",height:"5",x:"3",y:"3",rx:"1",key:"1tu5fj"}],["rect",{width:"5",height:"5",x:"16",y:"3",rx:"1",key:"1v8r4q"}],["rect",{width:"5",height:"5",x:"3",y:"16",rx:"1",key:"1x03jg"}],["path",{d:"M21 16h-3a2 2 0 0 0-2 2v3",key:"177gqh"}],["path",{d:"M21 21v.01",key:"ents32"}],["path",{d:"M12 7v3a2 2 0 0 1-2 2H7",key:"8crl2c"}],["path",{d:"M3 12h.01",key:"nlz23k"}],["path",{d:"M12 3h.01",key:"n36tog"}],["path",{d:"M12 16v.01",key:"133mhm"}],["path",{d:"M16 12h1",key:"1slzba"}],["path",{d:"M21 12v.01",key:"1lwtk9"}],["path",{d:"M12 21v-1",key:"1880an"}]],cJ=ut("qr-code",yxe);const vxe=[["path",{d:"M16.247 7.761a6 6 0 0 1 0 8.478",key:"1fwjs5"}],["path",{d:"M19.075 4.933a10 10 0 0 1 0 14.134",key:"ehdyv1"}],["path",{d:"M4.925 19.067a10 10 0 0 1 0-14.134",key:"1q22gi"}],["path",{d:"M7.753 16.239a6 6 0 0 1 0-8.478",key:"r2q7qm"}],["circle",{cx:"12",cy:"12",r:"2",key:"1c9p78"}]],eO=ut("radio",vxe);const wxe=[["path",{d:"M3 12a9 9 0 0 1 9-9 9.75 9.75 0 0 1 6.74 2.74L21 8",key:"v9h5vc"}],["path",{d:"M21 3v5h-5",key:"1q7to0"}],["path",{d:"M21 12a9 9 0 0 1-9 9 9.75 9.75 0 0 1-6.74-2.74L3 16",key:"3uifl3"}],["path",{d:"M8 16H3v5",key:"1cv678"}]],sr=ut("refresh-cw",wxe);const Sxe=[["path",{d:"M3 12a9 9 0 1 0 9-9 9.75 9.75 0 0 0-6.74 2.74L3 8",key:"1357e3"}],["path",{d:"M3 3v5h5",key:"1xhq8a"}]],Ts=ut("rotate-ccw",Sxe);const _xe=[["path",{d:"M21 12a9 9 0 1 1-9-9c2.52 0 4.93 1 6.74 2.74L21 8",key:"1p45f6"}],["path",{d:"M21 3v5h-5",key:"1q7to0"}]],uw=ut("rotate-cw",_xe);const kxe=[["path",{d:"M21.3 15.3a2.4 2.4 0 0 1 0 3.4l-2.6 2.6a2.4 2.4 0 0 1-3.4 0L2.7 8.7a2.41 2.41 0 0 1 0-3.4l2.6-2.6a2.41 2.41 0 0 1 3.4 0Z",key:"icamh8"}],["path",{d:"m14.5 12.5 2-2",key:"inckbg"}],["path",{d:"m11.5 9.5 2-2",key:"fmmyf7"}],["path",{d:"m8.5 6.5 2-2",key:"vc6u1g"}],["path",{d:"m17.5 15.5 2-2",key:"wo5hmg"}]],Nxe=ut("ruler",kxe);const Cxe=[["path",{d:"M15.2 3a2 2 0 0 1 1.4.6l3.8 3.8a2 2 0 0 1 .6 1.4V19a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V5a2 2 0 0 1 2-2z",key:"1c8476"}],["path",{d:"M17 21v-7a1 1 0 0 0-1-1H8a1 1 0 0 0-1 1v7",key:"1ydtos"}],["path",{d:"M7 3v4a1 1 0 0 0 1 1h7",key:"t51u73"}]],Ji=ut("save",Cxe);const Pxe=[["path",{d:"M12 3v18",key:"108xh3"}],["path",{d:"m19 8 3 8a5 5 0 0 1-6 0zV7",key:"zcdpyk"}],["path",{d:"M3 7h1a17 17 0 0 0 8-2 17 17 0 0 0 8 2h1",key:"1yorad"}],["path",{d:"m5 8 3 8a5 5 0 0 1-6 0zV7",key:"eua70x"}],["path",{d:"M7 21h10",key:"1b0cd5"}]],dJ=ut("scale",Pxe);const Txe=[["path",{d:"M3 7V5a2 2 0 0 1 2-2h2",key:"aa7l1z"}],["path",{d:"M17 3h2a2 2 0 0 1 2 2v2",key:"4qcy5o"}],["path",{d:"M21 17v2a2 2 0 0 1-2 2h-2",key:"6vwrx8"}],["path",{d:"M7 21H5a2 2 0 0 1-2-2v-2",key:"ioqczr"}],["circle",{cx:"12",cy:"12",r:"1",key:"41hilf"}],["path",{d:"M18.944 12.33a1 1 0 0 0 0-.66 7.5 7.5 0 0 0-13.888 0 1 1 0 0 0 0 .66 7.5 7.5 0 0 0 13.888 0",key:"11ak4c"}]],uJ=ut("scan-eye",Txe);const Axe=[["path",{d:"M3 7V5a2 2 0 0 1 2-2h2",key:"aa7l1z"}],["path",{d:"M17 3h2a2 2 0 0 1 2 2v2",key:"4qcy5o"}],["path",{d:"M21 17v2a2 2 0 0 1-2 2h-2",key:"6vwrx8"}],["path",{d:"M7 21H5a2 2 0 0 1-2-2v-2",key:"ioqczr"}],["circle",{cx:"12",cy:"12",r:"3",key:"1v7zrd"}],["path",{d:"m16 16-1.9-1.9",key:"1dq9hf"}]],DN=ut("scan-search",Axe);const jxe=[["circle",{cx:"6",cy:"6",r:"3",key:"1lh9wr"}],["path",{d:"M8.12 8.12 12 12",key:"1alkpv"}],["path",{d:"M20 4 8.12 15.88",key:"xgtan2"}],["circle",{cx:"6",cy:"18",r:"3",key:"fqmcym"}],["path",{d:"M14.8 14.8 20 20",key:"ptml3r"}]],Mxe=ut("scissors",jxe);const Exe=[["path",{d:"m21 21-4.34-4.34",key:"14j7rj"}],["circle",{cx:"11",cy:"11",r:"8",key:"4ej97u"}]],Nr=ut("search",Exe);const Dxe=[["path",{d:"M14.536 21.686a.5.5 0 0 0 .937-.024l6.5-19a.496.496 0 0 0-.635-.635l-19 6.5a.5.5 0 0 0-.024.937l7.93 3.18a2 2 0 0 1 1.112 1.11z",key:"1ffxy3"}],["path",{d:"m21.854 2.147-10.94 10.939",key:"12cjpa"}]],uS=ut("send",Dxe);const Fxe=[["rect",{width:"20",height:"8",x:"2",y:"2",rx:"2",ry:"2",key:"ngkwjq"}],["rect",{width:"20",height:"8",x:"2",y:"14",rx:"2",ry:"2",key:"iecqi9"}],["line",{x1:"6",x2:"6.01",y1:"6",y2:"6",key:"16zg32"}],["line",{x1:"6",x2:"6.01",y1:"18",y2:"18",key:"nzw8ys"}]],Pf=ut("server",Fxe);const Rxe=[["path",{d:"M14 17H5",key:"gfn3mx"}],["path",{d:"M19 7h-9",key:"6i9tg"}],["circle",{cx:"17",cy:"17",r:"3",key:"18b49y"}],["circle",{cx:"7",cy:"7",r:"3",key:"dfmy0x"}]],Hd=ut("settings-2",Rxe);const Lxe=[["path",{d:"M9.671 4.136a2.34 2.34 0 0 1 4.659 0 2.34 2.34 0 0 0 3.319 1.915 2.34 2.34 0 0 1 2.33 4.033 2.34 2.34 0 0 0 0 3.831 2.34 2.34 0 0 1-2.33 4.033 2.34 2.34 0 0 0-3.319 1.915 2.34 2.34 0 0 1-4.659 0 2.34 2.34 0 0 0-3.32-1.915 2.34 2.34 0 0 1-2.33-4.033 2.34 2.34 0 0 0 0-3.831A2.34 2.34 0 0 1 6.35 6.051a2.34 2.34 0 0 0 3.319-1.915",key:"1i5ecw"}],["circle",{cx:"12",cy:"12",r:"3",key:"1v7zrd"}]],mS=ut("settings",Lxe);const Ixe=[["path",{d:"M20 13c0 5-3.5 7.5-7.66 8.95a1 1 0 0 1-.67-.01C7.5 20.5 4 18 4 13V6a1 1 0 0 1 1-1c2 0 4.5-1.2 6.24-2.72a1.17 1.17 0 0 1 1.52 0C14.51 3.81 17 5 19 5a1 1 0 0 1 1 1z",key:"oel41y"}],["path",{d:"M12 8v4",key:"1got3b"}],["path",{d:"M12 16h.01",key:"1drbdi"}]],Oxe=ut("shield-alert",Ixe);const zxe=[["path",{d:"M20 13c0 5-3.5 7.5-7.66 8.95a1 1 0 0 1-.67-.01C7.5 20.5 4 18 4 13V6a1 1 0 0 1 1-1c2 0 4.5-1.2 6.24-2.72a1.17 1.17 0 0 1 1.52 0C14.51 3.81 17 5 19 5a1 1 0 0 1 1 1z",key:"oel41y"}],["path",{d:"m9 12 2 2 4-4",key:"dzmm74"}]],_F=ut("shield-check",zxe);const Uxe=[["path",{d:"m2 2 20 20",key:"1ooewy"}],["path",{d:"M5 5a1 1 0 0 0-1 1v7c0 5 3.5 7.5 7.67 8.94a1 1 0 0 0 .67.01c2.35-.82 4.48-1.97 5.9-3.71",key:"1jlk70"}],["path",{d:"M9.309 3.652A12.252 12.252 0 0 0 11.24 2.28a1.17 1.17 0 0 1 1.52 0C14.51 3.81 17 5 19 5a1 1 0 0 1 1 1v7a9.784 9.784 0 0 1-.08 1.264",key:"18rp1v"}]],GH=ut("shield-off",Uxe);const Bxe=[["path",{d:"M20 13c0 5-3.5 7.5-7.66 8.95a1 1 0 0 1-.67-.01C7.5 20.5 4 18 4 13V6a1 1 0 0 1 1-1c2 0 4.5-1.2 6.24-2.72a1.17 1.17 0 0 1 1.52 0C14.51 3.81 17 5 19 5a1 1 0 0 1 1 1z",key:"oel41y"}]],Wu=ut("shield",Bxe);const Hxe=[["circle",{cx:"8",cy:"21",r:"1",key:"jimo8o"}],["circle",{cx:"19",cy:"21",r:"1",key:"13723u"}],["path",{d:"M2.05 2.05h2l2.66 12.42a2 2 0 0 0 2 1.58h9.78a2 2 0 0 0 1.95-1.57l1.65-7.43H5.12",key:"9zh506"}]],mJ=ut("shopping-cart",Hxe);const qxe=[["path",{d:"M2 20h.01",key:"4haj6o"}],["path",{d:"M7 20v-4",key:"j294jx"}],["path",{d:"M12 20v-8",key:"i3yub9"}],["path",{d:"M17 20V8",key:"1tkaf5"}],["path",{d:"M22 4v16",key:"sih9yq"}]],hJ=ut("signal",qxe);const $xe=[["path",{d:"M17.971 4.285A2 2 0 0 1 21 6v12a2 2 0 0 1-3.029 1.715l-9.997-5.998a2 2 0 0 1-.003-3.432z",key:"15892j"}],["path",{d:"M3 20V4",key:"1ptbpl"}]],Vxe=ut("skip-back",$xe);const Gxe=[["path",{d:"M21 4v16",key:"7j8fe9"}],["path",{d:"M6.029 4.285A2 2 0 0 0 3 6v12a2 2 0 0 0 3.029 1.715l9.997-5.998a2 2 0 0 0 .003-3.432z",key:"zs4d6"}]],tT=ut("skip-forward",Gxe);const Wxe=[["path",{d:"M10 8h4",key:"1sr2af"}],["path",{d:"M12 21v-9",key:"17s77i"}],["path",{d:"M12 8V3",key:"13r4qs"}],["path",{d:"M17 16h4",key:"h1uq16"}],["path",{d:"M19 12V3",key:"o1uvq1"}],["path",{d:"M19 21v-5",key:"qua636"}],["path",{d:"M3 14h4",key:"bcjad9"}],["path",{d:"M5 10V3",key:"cb8scm"}],["path",{d:"M5 21v-7",key:"1w1uti"}]],WH=ut("sliders-vertical",Wxe);const Kxe=[["rect",{width:"14",height:"20",x:"5",y:"2",rx:"2",ry:"2",key:"1yt0o3"}],["path",{d:"M12 18h.01",key:"mhygvu"}]],kF=ut("smartphone",Kxe);const Xxe=[["path",{d:"M2 13a6 6 0 1 0 12 0 4 4 0 1 0-8 0 2 2 0 0 0 4 0",key:"hneq2s"}],["circle",{cx:"10",cy:"13",r:"8",key:"194lz3"}],["path",{d:"M2 21h12c4.4 0 8-3.6 8-8V7a2 2 0 1 0-4 0v6",key:"ixqyt7"}],["path",{d:"M18 3 19.1 5.2",key:"9tjm43"}],["path",{d:"M22 3 20.9 5.2",key:"j3odrs"}]],Yxe=ut("snail",Xxe);const Qxe=[["path",{d:"m10 20-1.25-2.5L6 18",key:"18frcb"}],["path",{d:"M10 4 8.75 6.5 6 6",key:"7mghy3"}],["path",{d:"m14 20 1.25-2.5L18 18",key:"1chtki"}],["path",{d:"m14 4 1.25 2.5L18 6",key:"1b4wsy"}],["path",{d:"m17 21-3-6h-4",key:"15hhxa"}],["path",{d:"m17 3-3 6 1.5 3",key:"11697g"}],["path",{d:"M2 12h6.5L10 9",key:"kv9z4n"}],["path",{d:"m20 10-1.5 2 1.5 2",key:"1swlpi"}],["path",{d:"M22 12h-6.5L14 15",key:"1mxi28"}],["path",{d:"m4 10 1.5 2L4 14",key:"k9enpj"}],["path",{d:"m7 21 3-6-1.5-3",key:"j8hb9u"}],["path",{d:"m7 3 3 6h4",key:"1otusx"}]],KH=ut("snowflake",Qxe);const Jxe=[["path",{d:"M11.017 2.814a1 1 0 0 1 1.966 0l1.051 5.558a2 2 0 0 0 1.594 1.594l5.558 1.051a1 1 0 0 1 0 1.966l-5.558 1.051a2 2 0 0 0-1.594 1.594l-1.051 5.558a1 1 0 0 1-1.966 0l-1.051-5.558a2 2 0 0 0-1.594-1.594l-5.558-1.051a1 1 0 0 1 0-1.966l5.558-1.051a2 2 0 0 0 1.594-1.594z",key:"1s2grr"}],["path",{d:"M20 2v4",key:"1rf3ol"}],["path",{d:"M22 4h-4",key:"gwowj6"}],["circle",{cx:"4",cy:"20",r:"2",key:"6kqj1y"}]],gg=ut("sparkles",Jxe);const Zxe=[["path",{d:"M21 10.656V19a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V5a2 2 0 0 1 2-2h12.344",key:"2acyp4"}],["path",{d:"m9 11 3 3L22 4",key:"1pflzl"}]],As=ut("square-check-big",Zxe);const eye=[["rect",{width:"18",height:"18",x:"3",y:"3",rx:"2",key:"afitv7"}],["path",{d:"M8 12h8",key:"1wcyev"}]],tye=ut("square-minus",eye);const nye=[["rect",{width:"18",height:"18",x:"3",y:"3",rx:"2",key:"afitv7"}]],mo=ut("square",nye);const rye=[["path",{d:"M11.525 2.295a.53.53 0 0 1 .95 0l2.31 4.679a2.123 2.123 0 0 0 1.595 1.16l5.166.756a.53.53 0 0 1 .294.904l-3.736 3.638a2.123 2.123 0 0 0-.611 1.878l.882 5.14a.53.53 0 0 1-.771.56l-4.618-2.428a2.122 2.122 0 0 0-1.973 0L6.396 21.01a.53.53 0 0 1-.77-.56l.881-5.139a2.122 2.122 0 0 0-.611-1.879L2.16 9.795a.53.53 0 0 1 .294-.906l5.165-.755a2.122 2.122 0 0 0 1.597-1.16z",key:"r04s7s"}]],bg=ut("star",rye);const aye=[["path",{d:"M21 9a2.4 2.4 0 0 0-.706-1.706l-3.588-3.588A2.4 2.4 0 0 0 15 3H5a2 2 0 0 0-2 2v14a2 2 0 0 0 2 2h14a2 2 0 0 0 2-2z",key:"1dfntj"}],["path",{d:"M15 3v5a1 1 0 0 0 1 1h5",key:"6s6qgf"}]],pJ=ut("sticky-note",aye);const iye=[["circle",{cx:"12",cy:"12",r:"4",key:"4exip2"}],["path",{d:"M12 2v2",key:"tus03m"}],["path",{d:"M12 20v2",key:"1lh1kg"}],["path",{d:"m4.93 4.93 1.41 1.41",key:"149t6j"}],["path",{d:"m17.66 17.66 1.41 1.41",key:"ptbguv"}],["path",{d:"M2 12h2",key:"1t8f8n"}],["path",{d:"M20 12h2",key:"1q8mjw"}],["path",{d:"m6.34 17.66-1.41 1.41",key:"1m8zz5"}],["path",{d:"m19.07 4.93-1.41 1.41",key:"1shlcs"}]],XH=ut("sun",iye);const sye=[["path",{d:"M15 3v18",key:"14nvp0"}],["rect",{width:"18",height:"18",x:"3",y:"3",rx:"2",key:"afitv7"}],["path",{d:"M21 9H3",key:"1338ky"}],["path",{d:"M21 15H3",key:"9uk58r"}]],oye=ut("table-properties",sye);const lye=[["path",{d:"M12.586 2.586A2 2 0 0 0 11.172 2H4a2 2 0 0 0-2 2v7.172a2 2 0 0 0 .586 1.414l8.704 8.704a2.426 2.426 0 0 0 3.42 0l6.58-6.58a2.426 2.426 0 0 0 0-3.42z",key:"vktsd0"}],["circle",{cx:"7.5",cy:"7.5",r:".5",fill:"currentColor",key:"kqv944"}]],ym=ut("tag",lye);const cye=[["circle",{cx:"12",cy:"12",r:"10",key:"1mglay"}],["circle",{cx:"12",cy:"12",r:"6",key:"1vlfrh"}],["circle",{cx:"12",cy:"12",r:"2",key:"1c9p78"}]],fJ=ut("target",cye);const dye=[["path",{d:"M12 19h8",key:"baeox8"}],["path",{d:"m4 17 6-6-6-6",key:"1yngyt"}]],gJ=ut("terminal",dye);const uye=[["path",{d:"M21 5H3",key:"1fi0y6"}],["path",{d:"M17 12H7",key:"16if0g"}],["path",{d:"M19 19H5",key:"vjpgq2"}]],mye=ut("text-align-center",uye);const hye=[["path",{d:"M21 5H3",key:"1fi0y6"}],["path",{d:"M21 12H9",key:"dn1m92"}],["path",{d:"M21 19H7",key:"4cu937"}]],pye=ut("text-align-end",hye);const fye=[["path",{d:"M21 5H3",key:"1fi0y6"}],["path",{d:"M15 12H3",key:"6jk70r"}],["path",{d:"M17 19H3",key:"z6ezky"}]],gye=ut("text-align-start",fye);const bye=[["path",{d:"M14 4v10.54a4 4 0 1 1-4 0V4a2 2 0 0 1 4 0Z",key:"17jzev"}]],hS=ut("thermometer",bye);const xye=[["line",{x1:"10",x2:"14",y1:"2",y2:"2",key:"14vaq8"}],["line",{x1:"12",x2:"15",y1:"14",y2:"11",key:"17fdiu"}],["circle",{cx:"12",cy:"14",r:"8",key:"1e1u0o"}]],Md=ut("timer",xye);const yye=[["path",{d:"M10 11v6",key:"nco0om"}],["path",{d:"M14 11v6",key:"outv1u"}],["path",{d:"M19 6v14a2 2 0 0 1-2 2H7a2 2 0 0 1-2-2V6",key:"miytrc"}],["path",{d:"M3 6h18",key:"d0wm0j"}],["path",{d:"M8 6V4a2 2 0 0 1 2-2h4a2 2 0 0 1 2 2v2",key:"e791ji"}]],Zt=ut("trash-2",yye);const vye=[["path",{d:"M16 17h6v-6",key:"t6n2it"}],["path",{d:"m22 17-8.5-8.5-5 5L2 7",key:"x473p"}]],tO=ut("trending-down",vye);const wye=[["path",{d:"M16 7h6v6",key:"box55l"}],["path",{d:"m22 7-8.5 8.5-5-5L2 17",key:"1t1m79"}]],NF=ut("trending-up",wye);const Sye=[["path",{d:"m21.73 18-8-14a2 2 0 0 0-3.48 0l-8 14A2 2 0 0 0 4 21h16a2 2 0 0 0 1.73-3",key:"wmoenq"}],["path",{d:"M12 9v4",key:"juzpu7"}],["path",{d:"M12 17h.01",key:"p32p05"}]],Cn=ut("triangle-alert",Sye);const _ye=[["path",{d:"M6 4v6a6 6 0 0 0 12 0V4",key:"9kb039"}],["line",{x1:"4",x2:"20",y1:"20",y2:"20",key:"nun2al"}]],kye=ut("underline",_ye);const Nye=[["path",{d:"m18.84 12.25 1.72-1.71h-.02a5.004 5.004 0 0 0-.12-7.07 5.006 5.006 0 0 0-6.95 0l-1.72 1.71",key:"yqzxt4"}],["path",{d:"m5.17 11.75-1.71 1.71a5.004 5.004 0 0 0 .12 7.07 5.006 5.006 0 0 0 6.95 0l1.71-1.71",key:"4qinb0"}],["line",{x1:"8",x2:"8",y1:"2",y2:"5",key:"1041cp"}],["line",{x1:"2",x2:"5",y1:"8",y2:"8",key:"14m1p5"}],["line",{x1:"16",x2:"16",y1:"19",y2:"22",key:"rzdirn"}],["line",{x1:"19",x2:"22",y1:"16",y2:"16",key:"ox905f"}]],Sp=ut("unlink",Nye);const Cye=[["path",{d:"M12 3v12",key:"1x0j5s"}],["path",{d:"m17 8-5-5-5 5",key:"7q97r8"}],["path",{d:"M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4",key:"ih7n3h"}]],_a=ut("upload",Cye);const Pye=[["path",{d:"M19 21v-2a4 4 0 0 0-4-4H9a4 4 0 0 0-4 4v2",key:"975kel"}],["circle",{cx:"12",cy:"7",r:"4",key:"17ys0d"}]],vm=ut("user",Pye);const Tye=[["path",{d:"M16 21v-2a4 4 0 0 0-4-4H6a4 4 0 0 0-4 4v2",key:"1yyitq"}],["path",{d:"M16 3.128a4 4 0 0 1 0 7.744",key:"16gr8j"}],["path",{d:"M22 21v-2a4 4 0 0 0-3-3.87",key:"kshegd"}],["circle",{cx:"9",cy:"7",r:"4",key:"nufk8"}]],Ku=ut("users",Tye);const Aye=[["path",{d:"m16 13 5.223 3.482a.5.5 0 0 0 .777-.416V7.87a.5.5 0 0 0-.752-.432L16 10.5",key:"ftymec"}],["rect",{x:"2",y:"6",width:"14",height:"12",rx:"2",key:"158x01"}]],FN=ut("video",Aye);const jye=[["path",{d:"M11 4.702a.705.705 0 0 0-1.203-.498L6.413 7.587A1.4 1.4 0 0 1 5.416 8H3a1 1 0 0 0-1 1v6a1 1 0 0 0 1 1h2.416a1.4 1.4 0 0 1 .997.413l3.383 3.384A.705.705 0 0 0 11 19.298z",key:"uqj9uw"}],["path",{d:"M16 9a5 5 0 0 1 0 6",key:"1q6k2b"}],["path",{d:"M19.364 18.364a9 9 0 0 0 0-12.728",key:"ijwkga"}]],Mye=ut("volume-2",jye);const Eye=[["path",{d:"M11 4.702a.705.705 0 0 0-1.203-.498L6.413 7.587A1.4 1.4 0 0 1 5.416 8H3a1 1 0 0 0-1 1v6a1 1 0 0 0 1 1h2.416a1.4 1.4 0 0 1 .997.413l3.383 3.384A.705.705 0 0 0 11 19.298z",key:"uqj9uw"}],["line",{x1:"22",x2:"16",y1:"9",y2:"15",key:"1ewh16"}],["line",{x1:"16",x2:"22",y1:"9",y2:"15",key:"5ykzw1"}]],Dye=ut("volume-x",Eye);const Fye=[["path",{d:"m21.64 3.64-1.28-1.28a1.21 1.21 0 0 0-1.72 0L2.36 18.64a1.21 1.21 0 0 0 0 1.72l1.28 1.28a1.2 1.2 0 0 0 1.72 0L21.64 5.36a1.2 1.2 0 0 0 0-1.72",key:"ul74o6"}],["path",{d:"m14 7 3 3",key:"1r5n42"}],["path",{d:"M5 6v4",key:"ilb8ba"}],["path",{d:"M19 14v4",key:"blhpug"}],["path",{d:"M10 2v2",key:"7u0qdc"}],["path",{d:"M7 8H3",key:"zfb6yr"}],["path",{d:"M21 16h-4",key:"1cnmox"}],["path",{d:"M11 3H9",key:"1obp7u"}]],bJ=ut("wand-sparkles",Fye);const Rye=[["circle",{cx:"12",cy:"5",r:"3",key:"rqqgnr"}],["path",{d:"M6.5 8a2 2 0 0 0-1.905 1.46L2.1 18.5A2 2 0 0 0 4 21h16a2 2 0 0 0 1.925-2.54L19.4 9.5A2 2 0 0 0 17.48 8Z",key:"56o5sh"}]],xJ=ut("weight",Rye);const Lye=[["path",{d:"M12 20h.01",key:"zekei9"}],["path",{d:"M8.5 16.429a5 5 0 0 1 7 0",key:"1bycff"}],["path",{d:"M5 12.859a10 10 0 0 1 5.17-2.69",key:"1dl1wf"}],["path",{d:"M19 12.859a10 10 0 0 0-2.007-1.523",key:"4k23kn"}],["path",{d:"M2 8.82a15 15 0 0 1 4.177-2.643",key:"1grhjp"}],["path",{d:"M22 8.82a15 15 0 0 0-11.288-3.764",key:"z3jwby"}],["path",{d:"m2 2 20 20",key:"1ooewy"}]],qd=ut("wifi-off",Lye);const Iye=[["path",{d:"M12 20h.01",key:"zekei9"}],["path",{d:"M2 8.82a15 15 0 0 1 20 0",key:"dnpr2z"}],["path",{d:"M5 12.859a10 10 0 0 1 14 0",key:"1x1e6c"}],["path",{d:"M8.5 16.429a5 5 0 0 1 7 0",key:"1bycff"}]],cp=ut("wifi",Iye);const Oye=[["path",{d:"M12.8 19.6A2 2 0 1 0 14 16H2",key:"148xed"}],["path",{d:"M17.5 8a2.5 2.5 0 1 1 2 4H2",key:"1u4tom"}],["path",{d:"M9.8 4.4A2 2 0 1 1 11 8H2",key:"75valh"}]],yJ=ut("wind",Oye);const zye=[["path",{d:"M14.7 6.3a1 1 0 0 0 0 1.4l1.6 1.6a1 1 0 0 0 1.4 0l3.106-3.105c.32-.322.863-.22.983.218a6 6 0 0 1-8.259 7.057l-7.91 7.91a1 1 0 0 1-2.999-3l7.91-7.91a6 6 0 0 1 7.057-8.259c.438.12.54.662.219.984z",key:"1ngwbx"}]],xg=ut("wrench",zye);const Uye=[["path",{d:"M18 6 6 18",key:"1bl5f8"}],["path",{d:"m6 6 12 12",key:"d8bk6v"}]],Bt=ut("x",Uye);const Bye=[["circle",{cx:"11",cy:"11",r:"8",key:"4ej97u"}],["line",{x1:"21",x2:"16.65",y1:"21",y2:"16.65",key:"13gj7c"}],["line",{x1:"11",x2:"11",y1:"8",y2:"14",key:"1vmskp"}],["line",{x1:"8",x2:"14",y1:"11",y2:"11",key:"durymu"}]],nO=ut("zoom-in",Bye);const Hye=[["path",{d:"M4 14a1 1 0 0 1-.78-1.63l9.9-10.2a.5.5 0 0 1 .86.46l-1.92 6.02A1 1 0 0 0 13 10h7a1 1 0 0 1 .78 1.63l-9.9 10.2a.5.5 0 0 1-.86-.46l1.92-6.02A1 1 0 0 0 11 14z",key:"1xq2db"}]],cc=ut("zap",Hye);const qye=[["circle",{cx:"11",cy:"11",r:"8",key:"4ej97u"}],["line",{x1:"21",x2:"16.65",y1:"21",y2:"16.65",key:"13gj7c"}],["line",{x1:"8",x2:"14",y1:"11",y2:"11",key:"durymu"}]],rO=ut("zoom-out",qye),Sn="/api/v1";let Nn=sessionStorage.getItem("auth_token")??localStorage.getItem("auth_token");function jh(t,e="session"){Nn=t;try{t?sessionStorage.setItem("auth_token",t):sessionStorage.removeItem("auth_token")}catch(n){console.warn("setAuthToken: sessionStorage unavailable, token kept in-memory only",n)}try{t?e==="persistent"&&localStorage.setItem("auth_token",t):localStorage.removeItem("auth_token")}catch(n){console.warn("setAuthToken: localStorage operation failed",n)}}function wm(){return Nn}let RN=null;function YH(t){RN=t}function vJ(){return RN}function Ta(t){if(!RN)return t;const e=t.includes("?")?"&":"?";return`${t}${e}token=${encodeURIComponent(RN)}`}function Tf(t){if(!t)return null;const e=t.match(/filename\*=(?:UTF-8|utf-8)''(.+?)(?:;|$)/);if(e)try{return decodeURIComponent(e[1])}catch{}return t.match(/filename="?([^";\n]+)"?/)?.[1]||null}async function Ee(t,e={}){const n={"Content-Type":"application/json",...e.headers};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}${t}`,{...e,cache:"no-store",credentials:"include",headers:n});if(!r.ok){const o=(await r.json().catch(()=>({}))).detail,l=typeof o=="string"?o:o?JSON.stringify(o):`HTTP ${r.status}`;throw r.status===401&&["Could not validate credentials","Token has expired","User not found or inactive","Invalid API key","API key has expired"].some(d=>l.includes(d))&&jh(null),new Error(l)}const i=r.headers.get("content-length");if(!(r.status===204||i==="0"))return await r.json()}const oe={getAuthStatus:()=>Ee("/auth/status"),setupAuth:t=>Ee("/auth/setup",{method:"POST",body:JSON.stringify(t)}),login:t=>Ee("/auth/login",{method:"POST",body:JSON.stringify(t)}),logout:()=>Ee("/auth/logout",{method:"POST"}),getCurrentUser:()=>Ee("/auth/me"),disableAuth:()=>Ee("/auth/disable",{method:"POST"}),testSMTP:t=>Ee("/auth/smtp/test",{method:"POST",body:JSON.stringify(t)}),getSMTPSettings:()=>Ee("/auth/smtp"),saveSMTPSettings:t=>Ee("/auth/smtp",{method:"POST",body:JSON.stringify(t)}),enableAdvancedAuth:()=>Ee("/auth/advanced-auth/enable",{method:"POST"}),disableAdvancedAuth:()=>Ee("/auth/advanced-auth/disable",{method:"POST"}),getAdvancedAuthStatus:()=>Ee("/auth/advanced-auth/status"),getLDAPStatus:()=>Ee("/auth/ldap/status"),testLDAP:()=>Ee("/auth/ldap/test",{method:"POST"}),forgotPassword:t=>Ee("/auth/forgot-password",{method:"POST",body:JSON.stringify(t)}),forgotPasswordConfirm:(t,e)=>Ee("/auth/forgot-password/confirm",{method:"POST",body:JSON.stringify({token:t,new_password:e})}),resetUserPassword:t=>Ee("/auth/reset-password",{method:"POST",body:JSON.stringify(t)}),get2FAStatus:()=>Ee("/auth/2fa/status"),setupTOTP:()=>Ee("/auth/2fa/totp/setup",{method:"POST"}),enableTOTP:t=>Ee("/auth/2fa/totp/enable",{method:"POST",body:JSON.stringify({code:t})}),disableTOTP:t=>Ee("/auth/2fa/totp/disable",{method:"POST",body:JSON.stringify({code:t})}),regenerateBackupCodes:t=>Ee("/auth/2fa/totp/regenerate-backup-codes",{method:"POST",body:JSON.stringify({code:t})}),enableEmailOTP:()=>Ee("/auth/2fa/email/enable",{method:"POST"}),confirmEnableEmailOTP:(t,e)=>Ee("/auth/2fa/email/enable/confirm",{method:"POST",body:JSON.stringify({setup_token:t,code:e})}),disableEmailOTP:t=>Ee("/auth/2fa/email/disable",{method:"POST",body:JSON.stringify({password:t})}),sendEmailOTP:t=>Ee("/auth/2fa/email/send",{method:"POST",body:JSON.stringify({pre_auth_token:t})}),verify2FA:t=>Ee("/auth/2fa/verify",{method:"POST",body:JSON.stringify(t)}),admin2FADisable:t=>Ee(`/auth/2fa/admin/${t}`,{method:"DELETE"}),getOIDCProviders:()=>Ee("/auth/oidc/providers"),getOIDCProvidersAll:()=>Ee("/auth/oidc/providers/all"),createOIDCProvider:t=>Ee("/auth/oidc/providers",{method:"POST",body:JSON.stringify(t)}),updateOIDCProvider:(t,e)=>Ee(`/auth/oidc/providers/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteOIDCProvider:t=>Ee(`/auth/oidc/providers/${t}`,{method:"DELETE"}),getOIDCAuthorizeUrl:t=>Ee(`/auth/oidc/authorize/${t}`),exchangeOIDCToken:t=>Ee("/auth/oidc/exchange",{method:"POST",body:JSON.stringify({oidc_token:t})}),getOIDCLinks:()=>Ee("/auth/oidc/links"),deleteOIDCLink:t=>Ee(`/auth/oidc/links/${t}`,{method:"DELETE"}),getUsers:()=>Ee("/users/"),getUser:t=>Ee(`/users/${t}`),createUser:t=>Ee("/users/",{method:"POST",body:JSON.stringify(t)}),updateUser:(t,e)=>Ee(`/users/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteUser:(t,e=!1)=>Ee(`/users/${t}?delete_items=${e}`,{method:"DELETE"}),getUserItemsCount:t=>Ee(`/users/${t}/items-count`),changePassword:(t,e)=>Ee("/users/me/change-password",{method:"POST",body:JSON.stringify({current_password:t,new_password:e})}),getUserEmailPreferences:()=>Ee("/user-notifications/preferences"),updateUserEmailPreferences:t=>Ee("/user-notifications/preferences",{method:"PUT",body:JSON.stringify(t)}),getPermissions:()=>Ee("/groups/permissions"),getGroups:()=>Ee("/groups/"),getGroup:t=>Ee(`/groups/${t}`),createGroup:t=>Ee("/groups/",{method:"POST",body:JSON.stringify(t)}),updateGroup:(t,e)=>Ee(`/groups/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteGroup:t=>Ee(`/groups/${t}`,{method:"DELETE"}),addUserToGroup:(t,e)=>Ee(`/groups/${t}/users/${e}`,{method:"POST"}),removeUserFromGroup:(t,e)=>Ee(`/groups/${t}/users/${e}`,{method:"DELETE"}),getPrinters:()=>Ee("/printers/"),getPrinter:t=>Ee(`/printers/${t}`),createPrinter:t=>Ee("/printers/",{method:"POST",body:JSON.stringify(t)}),updatePrinter:(t,e)=>Ee(`/printers/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deletePrinter:(t,e=!0)=>Ee(`/printers/${t}?delete_archives=${e}`,{method:"DELETE"}),getDeveloperModeWarnings:()=>Ee("/printers/developer-mode-warnings"),getAvailableFilaments:(t,e)=>{const n=new URLSearchParams({model:t});return e&&n.set("location",e),Ee(`/printers/available-filaments?${n}`)},getPrinterStatus:t=>Ee(`/printers/${t}/status`),refreshPrinterStatus:t=>Ee(`/printers/${t}/refresh-status`,{method:"POST"}),connectPrinter:t=>Ee(`/printers/${t}/connect`,{method:"POST"}),disconnectPrinter:t=>Ee(`/printers/${t}/disconnect`,{method:"POST"}),testExternalCamera:(t,e,n)=>Ee(`/printers/${t}/camera/external/test?url=${encodeURIComponent(e)}&camera_type=${encodeURIComponent(n)}`,{method:"POST"}),stopPrint:t=>Ee(`/printers/${t}/print/stop`,{method:"POST"}),pausePrint:t=>Ee(`/printers/${t}/print/pause`,{method:"POST"}),resumePrint:t=>Ee(`/printers/${t}/print/resume`,{method:"POST"}),clearPlate:t=>Ee(`/printers/${t}/clear-plate`,{method:"POST"}),getCurrentPrintUser:t=>Ee(`/printers/${t}/current-print-user`),setPrintSpeed:(t,e)=>Ee(`/printers/${t}/print-speed?mode=${e}`,{method:"POST"}),setAirductMode:(t,e)=>Ee(`/printers/${t}/airduct-mode?mode=${e}`,{method:"POST"}),bedJog:(t,e,n=!1)=>Ee(`/printers/${t}/bed-jog?distance=${e}&force=${n}`,{method:"POST"}),homeAxes:(t,e="z")=>Ee(`/printers/${t}/home-axes?axes=${e}`,{method:"POST"}),setChamberLight:(t,e)=>Ee(`/printers/${t}/chamber-light?on=${e}`,{method:"POST"}),startDrying:(t,e,n,r,i="",s=!1)=>Ee(`/printers/${t}/drying/start?ams_id=${e}&temp=${n}&duration=${r}&filament=${encodeURIComponent(i)}&rotate_tray=${s}`,{method:"POST"}),stopDrying:(t,e)=>Ee(`/printers/${t}/drying/stop?ams_id=${e}`,{method:"POST"}),getPrintableObjects:t=>Ee(`/printers/${t}/print/objects`),skipObjects:(t,e)=>Ee(`/printers/${t}/print/skip-objects`,{method:"POST",body:JSON.stringify(e)}),clearHMSErrors:t=>Ee(`/printers/${t}/hms/clear`,{method:"POST"}),refreshAmsSlot:(t,e,n)=>Ee(`/printers/${t}/ams/${e}/slot/${n}/refresh`,{method:"POST"}),enableMQTTLogging:t=>Ee(`/printers/${t}/logging/enable`,{method:"POST"}),disableMQTTLogging:t=>Ee(`/printers/${t}/logging/disable`,{method:"POST"}),getMQTTLogs:t=>Ee(`/printers/${t}/logging`),clearMQTTLogs:t=>Ee(`/printers/${t}/logging`,{method:"DELETE"}),getPrinterFiles:(t,e="/")=>Ee(`/printers/${t}/files?path=${encodeURIComponent(e)}`),getPrinterFileDownloadUrl:(t,e)=>`${Sn}/printers/${t}/files/download?path=${encodeURIComponent(e)}`,getPrinterFileGcodeUrl:(t,e)=>`${Sn}/printers/${t}/files/gcode?path=${encodeURIComponent(e)}`,getPrinterFilePlates:(t,e)=>Ee(`/printers/${t}/files/plates?path=${encodeURIComponent(e)}`),getPrinterFilePlateThumbnail:(t,e,n)=>Ta(`${Sn}/printers/${t}/files/plate-thumbnail/${e}?path=${encodeURIComponent(n)}`),downloadPrinterFile:async(t,e)=>{const n={};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/printers/${t}/files/download?path=${encodeURIComponent(e)}`,{headers:n});if(!r.ok){const d=await r.json().catch(()=>({}));throw new Error(d.detail||`HTTP ${r.status}`)}const i=r.headers.get("Content-Disposition"),s=Tf(i)||e.split("/").pop()||"download",o=await r.blob(),l=window.URL.createObjectURL(o),c=document.createElement("a");c.href=l,c.download=s,document.body.appendChild(c),c.click(),document.body.removeChild(c),window.URL.revokeObjectURL(l)},downloadPrinterFilesAsZip:async(t,e)=>{const n={"Content-Type":"application/json"};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/printers/${t}/files/download-zip`,{method:"POST",headers:n,body:JSON.stringify({paths:e})});if(!r.ok){const i=await r.json().catch(()=>({}));throw new Error(i.detail||`HTTP ${r.status}`)}return r.blob()},deletePrinterFile:(t,e)=>Ee(`/printers/${t}/files?path=${encodeURIComponent(e)}`,{method:"DELETE"}),getPrinterStorage:t=>Ee(`/printers/${t}/storage`),getArchives:(t,e,n=1e4,r=0,i,s)=>{const o=new URLSearchParams;return t&&o.set("printer_id",String(t)),e&&o.set("project_id",String(e)),o.set("limit",String(n)),o.set("offset",String(r)),i&&o.set("date_from",i),s&&o.set("date_to",s),Ee(`/archives/?${o}`)},getArchivesSlim:(t,e,n)=>{const r=new URLSearchParams;t&&r.set("date_from",t),e&&r.set("date_to",e),n!==void 0&&r.set("created_by_id",String(n));const i=r.toString();return Ee(`/archives/slim${i?`?${i}`:""}`)},getArchive:t=>Ee(`/archives/${t}`),searchArchives:(t,e)=>{const n=new URLSearchParams;return n.set("q",t),e?.printerId&&n.set("printer_id",String(e.printerId)),e?.projectId&&n.set("project_id",String(e.projectId)),e?.status&&n.set("status",e.status),e?.limit&&n.set("limit",String(e.limit)),e?.offset&&n.set("offset",String(e.offset)),Ee(`/archives/search?${n}`)},rebuildSearchIndex:()=>Ee("/archives/search/rebuild-index",{method:"POST"}),updateArchive:(t,e)=>Ee(`/archives/${t}`,{method:"PATCH",body:JSON.stringify(e)}),toggleFavorite:t=>Ee(`/archives/${t}/favorite`,{method:"POST"}),deleteArchive:t=>Ee(`/archives/${t}`,{method:"DELETE"}),previewArchivePurge:t=>Ee(`/archives/purge/preview?older_than_days=${t}`),executeArchivePurge:t=>Ee("/archives/purge",{method:"POST",body:JSON.stringify({older_than_days:t})}),getArchivePurgeSettings:()=>Ee("/archives/purge/settings"),updateArchivePurgeSettings:t=>Ee("/archives/purge/settings",{method:"PUT",body:JSON.stringify(t)}),getArchiveStats:t=>{const e=new URLSearchParams;t?.dateFrom&&e.set("date_from",t.dateFrom),t?.dateTo&&e.set("date_to",t.dateTo),t?.createdById!==void 0&&e.set("created_by_id",String(t.createdById));const n=e.toString();return Ee(`/archives/stats${n?`?${n}`:""}`)},getTags:()=>Ee("/archives/tags"),renameTag:(t,e)=>Ee(`/archives/tags/${encodeURIComponent(t)}`,{method:"PUT",body:JSON.stringify({new_name:e})}),deleteTag:t=>Ee(`/archives/tags/${encodeURIComponent(t)}`,{method:"DELETE"}),recalculateCosts:()=>Ee("/archives/recalculate-costs",{method:"POST"}),getFailureAnalysis:t=>{const e=new URLSearchParams;t?.days&&e.set("days",String(t.days)),t?.dateFrom&&e.set("date_from",t.dateFrom),t?.dateTo&&e.set("date_to",t.dateTo),t?.printerId&&e.set("printer_id",String(t.printerId)),t?.projectId&&e.set("project_id",String(t.projectId)),t?.createdById!==void 0&&e.set("created_by_id",String(t.createdById));const n=e.toString();return Ee(`/archives/analysis/failures${n?`?${n}`:""}`)},compareArchives:t=>Ee(`/archives/compare?archive_ids=${t.join(",")}`),findSimilarArchives:(t,e=10)=>Ee(`/archives/${t}/similar?limit=${e}`),exportArchives:async t=>{const e=new URLSearchParams;t?.format&&e.set("format",t.format),t?.fields&&e.set("fields",t.fields.join(",")),t?.printerId&&e.set("printer_id",String(t.printerId)),t?.projectId&&e.set("project_id",String(t.projectId)),t?.status&&e.set("status",t.status),t?.dateFrom&&e.set("date_from",t.dateFrom),t?.dateTo&&e.set("date_to",t.dateTo),t?.search&&e.set("search",t.search);const n={};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/archives/export?${e}`,{headers:n});if(!r.ok){const l=await r.json().catch(()=>({}));throw new Error(l.detail||`HTTP ${r.status}`)}const i=r.headers.get("Content-Disposition");let s=t?.format==="xlsx"?"archives_export.xlsx":"archives_export.csv";if(i){const l=i.match(/filename="?([^"]+)"?/);l&&(s=l[1])}return{blob:await r.blob(),filename:s}},exportStats:async t=>{const e=new URLSearchParams;t?.format&&e.set("format",t.format),t?.days&&e.set("days",String(t.days)),t?.printerId&&e.set("printer_id",String(t.printerId)),t?.projectId&&e.set("project_id",String(t.projectId)),t?.createdById!==void 0&&e.set("created_by_id",String(t.createdById));const n={};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/archives/stats/export?${e}`,{headers:n});if(!r.ok){const l=await r.json().catch(()=>({}));throw new Error(l.detail||`HTTP ${r.status}`)}const i=r.headers.get("Content-Disposition");let s=t?.format==="xlsx"?"stats_export.xlsx":"stats_export.csv";if(i){const l=i.match(/filename="?([^"]+)"?/);l&&(s=l[1])}return{blob:await r.blob(),filename:s}},getArchiveDuplicates:t=>Ee(`/archives/${t}/duplicates`),backfillContentHashes:()=>Ee("/archives/backfill-hashes",{method:"POST"}),getArchiveThumbnail:t=>Ta(`${Sn}/archives/${t}/thumbnail?v=${Date.now()}`),getArchivePlateThumbnail:(t,e)=>Ta(`${Sn}/archives/${t}/plate-thumbnail/${e}`),getArchiveDownload:t=>`${Sn}/archives/${t}/download`,downloadArchive:async(t,e)=>{const n={};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/archives/${t}/download`,{headers:n});if(!r.ok){const d=await r.json().catch(()=>({}));throw new Error(d.detail||`HTTP ${r.status}`)}const i=r.headers.get("Content-Disposition"),s=Tf(i)||e||`archive_${t}.3mf`,o=await r.blob(),l=window.URL.createObjectURL(o),c=document.createElement("a");c.href=l,c.download=s,document.body.appendChild(c),c.click(),document.body.removeChild(c),window.URL.revokeObjectURL(l)},getArchiveGcode:t=>`${Sn}/archives/${t}/gcode`,getArchivePlatePreview:t=>Ta(`${Sn}/archives/${t}/plate-preview`),getArchiveTimelapse:t=>Ta(`${Sn}/archives/${t}/timelapse?v=${Date.now()}`),scanArchiveTimelapse:t=>Ee(`/archives/${t}/timelapse/scan`,{method:"POST"}),selectArchiveTimelapse:(t,e)=>Ee(`/archives/${t}/timelapse/select?filename=${encodeURIComponent(e)}`,{method:"POST"}),deleteArchiveTimelapse:t=>Ee(`/archives/${t}/timelapse`,{method:"DELETE"}),uploadArchiveTimelapse:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/archives/${t}/timelapse/upload`,{method:"POST",headers:r,body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},getTimelapseInfo:t=>Ee(`/archives/${t}/timelapse/info`),getTimelapseThumbnails:(t,e=10)=>Ee(`/archives/${t}/timelapse/thumbnails?count=${e}`),processTimelapse:async(t,e,n)=>{const r=new FormData;r.append("trim_start",String(e.trimStart??0)),e.trimEnd!==void 0&&r.append("trim_end",String(e.trimEnd)),r.append("speed",String(e.speed??1)),r.append("save_mode",e.saveMode),e.outputFilename&&r.append("output_filename",e.outputFilename),n&&r.append("audio",n);const i={};Nn&&(i.Authorization=`Bearer ${Nn}`);const s=await fetch(`${Sn}/archives/${t}/timelapse/process`,{method:"POST",headers:i,body:r});if(!s.ok){const o=await s.json().catch(()=>({}));throw new Error(o.detail||`HTTP ${s.status}`)}return s.json()},getArchivePhotoUrl:(t,e)=>Ta(`${Sn}/archives/${t}/photos/${encodeURIComponent(e)}`),uploadArchivePhoto:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/archives/${t}/photos`,{headers:r,method:"POST",body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},deleteArchivePhoto:(t,e)=>Ee(`/archives/${t}/photos/${encodeURIComponent(e)}`,{method:"DELETE"}),getSource3mfDownloadUrl:t=>`${Sn}/archives/${t}/source`,downloadSource3mf:async t=>{const e={};Nn&&(e.Authorization=`Bearer ${Nn}`);const n=await fetch(`${Sn}/archives/${t}/source`,{headers:e});if(!n.ok){const c=await n.json().catch(()=>({}));throw new Error(c.detail||`HTTP ${n.status}`)}const r=n.headers.get("Content-Disposition"),i=Tf(r)||`source_${t}.3mf`,s=await n.blob(),o=window.URL.createObjectURL(s),l=document.createElement("a");l.href=o,l.download=i,document.body.appendChild(l),l.click(),document.body.removeChild(l),window.URL.revokeObjectURL(o)},getSource3mfForSlicer:(t,e)=>{const n=e.replace(/[/\\?#]/g,"_");return`${Sn}/archives/${t}/source/${encodeURIComponent(n.endsWith(".3mf")?n:n+".3mf")}`},createSourceSlicerToken:t=>Ee(`/archives/${t}/source-slicer-token`,{method:"POST"}),getSourceSlicerDownloadUrl:(t,e,n)=>{const r=n.replace(/[/\\?#]/g,"_");return`${Sn}/archives/${t}/source-dl/${e}/${encodeURIComponent(r.endsWith(".3mf")?r:r+".3mf")}`},uploadSource3mf:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/archives/${t}/source`,{method:"POST",headers:r,body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},deleteSource3mf:t=>Ee(`/archives/${t}/source`,{method:"DELETE"}),getF3dDownloadUrl:t=>`${Sn}/archives/${t}/f3d`,downloadF3d:async t=>{const e={};Nn&&(e.Authorization=`Bearer ${Nn}`);const n=await fetch(`${Sn}/archives/${t}/f3d`,{headers:e});if(!n.ok){const c=await n.json().catch(()=>({}));throw new Error(c.detail||`HTTP ${n.status}`)}const r=n.headers.get("Content-Disposition"),i=Tf(r)||`archive_${t}.f3d`,s=await n.blob(),o=window.URL.createObjectURL(s),l=document.createElement("a");l.href=o,l.download=i,document.body.appendChild(l),l.click(),document.body.removeChild(l),window.URL.revokeObjectURL(o)},uploadF3d:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/archives/${t}/f3d`,{method:"POST",headers:r,body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},deleteF3d:t=>Ee(`/archives/${t}/f3d`,{method:"DELETE"}),getArchiveQRCodeUrl:(t,e=200)=>Ta(`${Sn}/archives/${t}/qrcode?size=${e}`),getArchiveCapabilities:t=>Ee(`/archives/${t}/capabilities`),getArchiveProjectPage:t=>Ee(`/archives/${t}/project-page`),updateArchiveProjectPage:(t,e)=>Ee(`/archives/${t}/project-page`,{method:"PATCH",body:JSON.stringify(e)}),getArchiveProjectImageUrl:(t,e)=>Ta(`${Sn}/archives/${t}/project-image/${encodeURIComponent(e)}`),getArchiveForSlicer:(t,e)=>{const n=e.replace(/[/\\?#]/g,"_");return`${Sn}/archives/${t}/file/${encodeURIComponent(n.endsWith(".3mf")?n:n+".3mf")}`},createArchiveSlicerToken:t=>Ee(`/archives/${t}/slicer-token`,{method:"POST"}),getArchiveSlicerDownloadUrl:(t,e,n)=>{const r=n.replace(/[/\\?#]/g,"_");return`${Sn}/archives/${t}/dl/${e}/${encodeURIComponent(r.endsWith(".3mf")?r:r+".3mf")}`},getArchivePlates:t=>Ee(`/archives/${t}/plates`),getArchiveFilamentRequirements:(t,e,n)=>{const r=new URLSearchParams;return e!==void 0&&r.set("plate_id",String(e)),n&&r.set("request_id",n),Ee(`/archives/${t}/filament-requirements${r.toString()?`?${r}`:""}`)},reprintArchive:(t,e,n)=>Ee(`/archives/${t}/reprint?printer_id=${e}`,{method:"POST",headers:n?{"Content-Type":"application/json"}:void 0,body:n?JSON.stringify(n):void 0}),uploadArchive:async(t,e)=>{const n=new FormData;n.append("file",t);const r=e?`${Sn}/archives/upload?printer_id=${e}`:`${Sn}/archives/upload`,i={};Nn&&(i.Authorization=`Bearer ${Nn}`);const s=await fetch(r,{method:"POST",headers:i,body:n});if(!s.ok){const o=await s.json().catch(()=>({}));throw new Error(o.detail||`HTTP ${s.status}`)}return s.json()},uploadArchivesBulk:async(t,e)=>{const n=new FormData;t.forEach(o=>n.append("files",o));const r=e?`${Sn}/archives/upload-bulk?printer_id=${e}`:`${Sn}/archives/upload-bulk`,i={};Nn&&(i.Authorization=`Bearer ${Nn}`);const s=await fetch(r,{method:"POST",headers:i,body:n});if(!s.ok){const o=await s.json().catch(()=>({}));throw new Error(o.detail||`HTTP ${s.status}`)}return s.json()},getPrintLog:t=>{const e=new URLSearchParams;return t?.search&&e.set("search",t.search),t?.printerId&&e.set("printer_id",String(t.printerId)),t?.username&&e.set("created_by_username",t.username),t?.status&&e.set("status",t.status),t?.dateFrom&&e.set("date_from",t.dateFrom),t?.dateTo&&e.set("date_to",t.dateTo),t?.limit&&e.set("limit",String(t.limit)),t?.offset!==void 0&&e.set("offset",String(t.offset)),Ee(`/print-log/?${e}`)},getPrintLogThumbnail:t=>Ta(`${Sn}/print-log/${t}/thumbnail`),clearPrintLog:()=>Ee("/print-log/",{method:"DELETE"}),getSettings:()=>Ee("/settings/"),getDefaultSidebarOrder:()=>Ee("/settings/default-sidebar-order"),updateSettings:t=>Ee("/settings/",{method:"PUT",body:JSON.stringify(t)}),getMQTTStatus:()=>Ee("/settings/mqtt/status"),resetSettings:()=>Ee("/settings/reset",{method:"POST"}),exportBackup:async()=>{const t=`${Sn}/settings/backup`,e={};Nn&&(e.Authorization=`Bearer ${Nn}`);const n=await fetch(t,{headers:e});if(!n.ok){const o=await n.text();throw new Error(o||`Backup failed with status ${n.status}`)}const r=n.headers.get("Content-Disposition");let i="bambuddy-backup.zip";if(r){const o=r.match(/filename=([^;]+)/);o&&(i=o[1].trim().replace(/^"(.*)"$/,"$1"))}return{blob:await n.blob(),filename:i}},importBackup:async t=>{const e=new FormData;e.append("file",t);const n=`${Sn}/settings/restore`,r={};return Nn&&(r.Authorization=`Bearer ${Nn}`),(await fetch(n,{method:"POST",headers:r,body:e})).json()},checkFfmpeg:()=>Ee("/settings/check-ffmpeg"),getNetworkInterfaces:()=>Ee("/settings/network-interfaces"),getCloudStatus:()=>Ee("/cloud/status"),cloudLogin:(t,e,n="global")=>Ee("/cloud/login",{method:"POST",body:JSON.stringify({email:t,password:e,region:n})}),cloudVerify:(t,e,n,r="global")=>Ee("/cloud/verify",{method:"POST",body:JSON.stringify({email:t,code:e,tfa_key:n,region:r})}),cloudSetToken:(t,e="global")=>Ee("/cloud/token",{method:"POST",body:JSON.stringify({access_token:t,region:e})}),cloudLogout:()=>Ee("/cloud/logout",{method:"POST"}),getCloudSettings:(t="02.04.00.70")=>Ee(`/cloud/settings?version=${t}`),getBuiltinFilaments:()=>Ee("/cloud/builtin-filaments"),getFilamentIdMap:()=>Ee("/cloud/filament-id-map"),getMakerworldStatus:()=>Ee("/makerworld/status"),resolveMakerworldUrl:t=>Ee("/makerworld/resolve",{method:"POST",body:JSON.stringify({url:t})}),getMakerworldRecentImports:(t=10)=>Ee(`/makerworld/recent-imports?limit=${t}`),importMakerworldInstance:(t,e,n,r)=>Ee("/makerworld/import",{method:"POST",body:JSON.stringify({model_id:t,instance_id:e??null,profile_id:n??null,folder_id:r??null})}),getCloudSettingDetail:t=>Ee(`/cloud/settings/${t}`),createCloudSetting:t=>Ee("/cloud/settings",{method:"POST",body:JSON.stringify(t)}),updateCloudSetting:(t,e)=>Ee(`/cloud/settings/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteCloudSetting:t=>Ee(`/cloud/settings/${t}`,{method:"DELETE"}),getCloudDevices:()=>Ee("/cloud/devices"),getCloudFields:t=>Ee(`/cloud/fields/${t}`),getAllCloudFields:()=>Ee("/cloud/fields"),getFilamentInfo:t=>Ee("/cloud/filament-info",{method:"POST",body:JSON.stringify(t)}),getSmartPlugs:()=>Ee("/smart-plugs/"),getSmartPlug:t=>Ee(`/smart-plugs/${t}`),getSmartPlugByPrinter:t=>Ee(`/smart-plugs/by-printer/${t}`),getScriptPlugsByPrinter:t=>Ee(`/smart-plugs/by-printer/${t}/scripts`),createSmartPlug:t=>Ee("/smart-plugs/",{method:"POST",body:JSON.stringify(t)}),updateSmartPlug:(t,e)=>Ee(`/smart-plugs/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteSmartPlug:t=>Ee(`/smart-plugs/${t}`,{method:"DELETE"}),controlSmartPlug:(t,e)=>Ee(`/smart-plugs/${t}/control`,{method:"POST",body:JSON.stringify({action:e})}),getSmartPlugStatus:t=>Ee(`/smart-plugs/${t}/status`),testSmartPlugConnection:(t,e,n)=>Ee("/smart-plugs/test-connection",{method:"POST",body:JSON.stringify({ip_address:t,username:e,password:n})}),startTasmotaScan:()=>Ee("/smart-plugs/discover/scan",{method:"POST"}),getTasmotaScanStatus:()=>Ee("/smart-plugs/discover/status"),stopTasmotaScan:()=>Ee("/smart-plugs/discover/stop",{method:"POST"}),getDiscoveredTasmotaDevices:()=>Ee("/smart-plugs/discover/devices"),testHAConnection:(t,e)=>Ee("/smart-plugs/ha/test-connection",{method:"POST",body:JSON.stringify({url:t,token:e})}),getHAEntities:t=>{const e=t?`?search=${encodeURIComponent(t)}`:"";return Ee(`/smart-plugs/ha/entities${e}`)},getHASensorEntities:()=>Ee("/smart-plugs/ha/sensors"),testRESTConnection:(t,e="GET",n)=>Ee("/smart-plugs/rest/test-connection",{method:"POST",body:JSON.stringify({url:t,method:e,headers:n})}),getQueue:(t,e,n)=>{const r=new URLSearchParams;return t&&r.set("printer_id",String(t)),e&&r.set("status",e),n&&r.set("target_model",n),Ee(`/queue/?${r}`)},getQueueItem:t=>Ee(`/queue/${t}`),addToQueue:t=>Ee("/queue/",{method:"POST",body:JSON.stringify(t)}),updateQueueItem:(t,e)=>Ee(`/queue/${t}`,{method:"PATCH",body:JSON.stringify(e)}),removeFromQueue:t=>Ee(`/queue/${t}`,{method:"DELETE"}),reorderQueue:t=>Ee("/queue/reorder",{method:"POST",body:JSON.stringify({items:t})}),cancelQueueItem:t=>Ee(`/queue/${t}/cancel`,{method:"POST"}),stopQueueItem:t=>Ee(`/queue/${t}/stop`,{method:"POST"}),startQueueItem:t=>Ee(`/queue/${t}/start`,{method:"POST"}),bulkUpdateQueue:t=>Ee("/queue/bulk",{method:"PATCH",body:JSON.stringify(t)}),getBatches:t=>{const e=t?`?status=${t}`:"";return Ee(`/queue/batches${e}`)},getBatch:t=>Ee(`/queue/batches/${t}`),cancelBatch:t=>Ee(`/queue/batches/${t}`,{method:"DELETE"}),getKProfiles:(t,e="0.4")=>Ee(`/printers/${t}/kprofiles/?nozzle_diameter=${e}`),setKProfile:(t,e)=>Ee(`/printers/${t}/kprofiles/`,{method:"POST",body:JSON.stringify(e)}),deleteKProfile:(t,e)=>Ee(`/printers/${t}/kprofiles/`,{method:"DELETE",body:JSON.stringify(e)}),setKProfilesBatch:(t,e)=>Ee(`/printers/${t}/kprofiles/batch`,{method:"POST",body:JSON.stringify(e)}),getKProfileNotes:t=>Ee(`/printers/${t}/kprofiles/notes`),setKProfileNote:(t,e,n)=>Ee(`/printers/${t}/kprofiles/notes`,{method:"PUT",body:JSON.stringify({setting_id:e,note:n})}),deleteKProfileNote:(t,e)=>Ee(`/printers/${t}/kprofiles/notes/${encodeURIComponent(e)}`,{method:"DELETE"}),getSlotPresets:t=>Ee(`/printers/${t}/slot-presets`),getSlotPreset:(t,e,n)=>Ee(`/printers/${t}/slot-presets/${e}/${n}`),saveSlotPreset:(t,e,n,r,i,s="cloud")=>Ee(`/printers/${t}/slot-presets/${e}/${n}?preset_id=${encodeURIComponent(r)}&preset_name=${encodeURIComponent(i)}&preset_source=${encodeURIComponent(s)}`,{method:"PUT"}),deleteSlotPreset:(t,e,n)=>Ee(`/printers/${t}/slot-presets/${e}/${n}`,{method:"DELETE"}),getAmsLabels:t=>Ee(`/printers/${t}/ams-labels`),saveAmsLabel:(t,e,n,r="")=>Ee(`/printers/${t}/ams-labels/${e}`,{method:"PUT",body:JSON.stringify({label:n,ams_serial:r})}),deleteAmsLabel:(t,e,n="")=>Ee(`/printers/${t}/ams-labels/${e}?ams_serial=${encodeURIComponent(n)}`,{method:"DELETE"}),configureAmsSlot:(t,e,n,r)=>{const i=new URLSearchParams({tray_info_idx:r.tray_info_idx,tray_type:r.tray_type,tray_sub_brands:r.tray_sub_brands,tray_color:r.tray_color,nozzle_temp_min:r.nozzle_temp_min.toString(),nozzle_temp_max:r.nozzle_temp_max.toString(),cali_idx:r.cali_idx.toString(),nozzle_diameter:r.nozzle_diameter});return r.setting_id&&i.set("setting_id",r.setting_id),r.kprofile_filament_id&&i.set("kprofile_filament_id",r.kprofile_filament_id),r.kprofile_setting_id&&i.set("kprofile_setting_id",r.kprofile_setting_id),r.k_value!==void 0&&r.k_value>0&&i.set("k_value",r.k_value.toString()),Ee(`/printers/${t}/slots/${e}/${n}/configure?${i}`,{method:"POST"})},resetAmsSlot:(t,e,n)=>Ee(`/printers/${t}/ams/${e}/tray/${n}/reset`,{method:"POST"}),listFilaments:()=>Ee("/filament-catalog/"),getFilament:t=>Ee(`/filament-catalog/${t}`),getFilamentsByType:t=>Ee(`/filament-catalog/by-type/${t}`),getNotificationProviders:()=>Ee("/notifications/"),getNotificationProvider:t=>Ee(`/notifications/${t}`),createNotificationProvider:t=>Ee("/notifications/",{method:"POST",body:JSON.stringify(t)}),updateNotificationProvider:(t,e)=>Ee(`/notifications/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteNotificationProvider:t=>Ee(`/notifications/${t}`,{method:"DELETE"}),testNotificationProvider:t=>Ee(`/notifications/${t}/test`,{method:"POST"}),testNotificationConfig:t=>Ee("/notifications/test-config",{method:"POST",body:JSON.stringify(t)}),testAllNotificationProviders:()=>Ee("/notifications/test-all",{method:"POST"}),getNotificationTemplates:()=>Ee("/notification-templates"),getNotificationTemplate:t=>Ee(`/notification-templates/${t}`),updateNotificationTemplate:(t,e)=>Ee(`/notification-templates/${t}`,{method:"PUT",body:JSON.stringify(e)}),resetNotificationTemplate:t=>Ee(`/notification-templates/${t}/reset`,{method:"POST"}),getTemplateVariables:()=>Ee("/notification-templates/variables"),previewTemplate:t=>Ee("/notification-templates/preview",{method:"POST",body:JSON.stringify(t)}),getNotificationLogs:t=>{const e=new URLSearchParams;return t?.limit&&e.set("limit",String(t.limit)),t?.offset&&e.set("offset",String(t.offset)),t?.provider_id&&e.set("provider_id",String(t.provider_id)),t?.event_type&&e.set("event_type",t.event_type),t?.success!==void 0&&e.set("success",String(t.success)),t?.days&&e.set("days",String(t.days)),Ee(`/notifications/logs?${e}`)},getNotificationLogStats:(t=7)=>Ee(`/notifications/logs/stats?days=${t}`),clearNotificationLogs:(t=30)=>Ee(`/notifications/logs?older_than_days=${t}`,{method:"DELETE"}),getSpoolmanStatus:()=>Ee("/spoolman/status"),connectSpoolman:()=>Ee("/spoolman/connect",{method:"POST"}),disconnectSpoolman:()=>Ee("/spoolman/disconnect",{method:"POST"}),syncPrinterAms:t=>Ee(`/spoolman/sync/${t}`,{method:"POST"}),syncAllPrintersAms:()=>Ee("/spoolman/sync-all",{method:"POST"}),getSpoolmanSpools:()=>Ee("/spoolman/spools"),getSpoolmanFilaments:()=>Ee("/spoolman/filaments"),getUnlinkedSpools:()=>Ee("/spoolman/spools/unlinked"),getLinkedSpools:()=>Ee("/spoolman/spools/linked"),linkSpool:(t,e)=>Ee(`/spoolman/spools/${t}/link`,{method:"POST",body:JSON.stringify({spool_tag:e.spoolTag,printer_id:e.printerId,ams_id:e.amsId,tray_id:e.trayId})}),unlinkSpool:t=>Ee(`/spoolman/spools/${t}/unlink`,{method:"POST"}),getSpoolmanSettings:()=>Ee("/settings/spoolman"),updateSpoolmanSettings:t=>Ee("/settings/spoolman",{method:"PUT",body:JSON.stringify(t)}),getSpools:(t=!1)=>Ee(`/inventory/spools?include_archived=${t}`),getSpool:t=>Ee(`/inventory/spools/${t}`),createSpool:t=>Ee("/inventory/spools",{method:"POST",body:JSON.stringify(t)}),bulkCreateSpools:(t,e)=>Ee("/inventory/spools/bulk",{method:"POST",body:JSON.stringify({spool:t,quantity:e})}),updateSpool:(t,e)=>Ee(`/inventory/spools/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteSpool:t=>Ee(`/inventory/spools/${t}`,{method:"DELETE"}),archiveSpool:t=>Ee(`/inventory/spools/${t}/archive`,{method:"POST"}),restoreSpool:t=>Ee(`/inventory/spools/${t}/restore`,{method:"POST"}),getSpoolKProfiles:t=>Ee(`/inventory/spools/${t}/k-profiles`),saveSpoolKProfiles:(t,e)=>Ee(`/inventory/spools/${t}/k-profiles`,{method:"PUT",body:JSON.stringify(e)}),getAssignments:t=>Ee(`/inventory/assignments${t?`?printer_id=${t}`:""}`),assignSpool:t=>Ee("/inventory/assignments",{method:"POST",body:JSON.stringify(t)}),unassignSpool:(t,e,n)=>Ee(`/inventory/assignments/${t}/${e}/${n}`,{method:"DELETE"}),getSpoolCatalog:()=>Ee("/inventory/catalog"),addCatalogEntry:t=>Ee("/inventory/catalog",{method:"POST",body:JSON.stringify(t)}),updateCatalogEntry:(t,e)=>Ee(`/inventory/catalog/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteCatalogEntry:t=>Ee(`/inventory/catalog/${t}`,{method:"DELETE"}),bulkDeleteCatalogEntries:t=>Ee("/inventory/catalog/bulk-delete",{method:"POST",body:JSON.stringify({ids:t})}),resetSpoolCatalog:()=>Ee("/inventory/catalog/reset",{method:"POST"}),getColorCatalog:()=>Ee("/inventory/colors"),getColorNameMap:()=>Ee("/inventory/colors/map"),addColorEntry:t=>Ee("/inventory/colors",{method:"POST",body:JSON.stringify(t)}),updateColorEntry:(t,e)=>Ee(`/inventory/colors/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteColorEntry:t=>Ee(`/inventory/colors/${t}`,{method:"DELETE"}),bulkDeleteColorEntries:t=>Ee("/inventory/colors/bulk-delete",{method:"POST",body:JSON.stringify({ids:t})}),resetColorCatalog:()=>Ee("/inventory/colors/reset",{method:"POST"}),lookupColor:(t,e,n)=>Ee(`/inventory/colors/lookup?manufacturer=${encodeURIComponent(t)}&color_name=${encodeURIComponent(e)}${n?`&material=${encodeURIComponent(n)}`:""}`),searchColors:(t,e)=>Ee(`/inventory/colors/search?${t?`manufacturer=${encodeURIComponent(t)}`:""}${t&&e?"&":""}${e?`material=${encodeURIComponent(e)}`:""}`),linkTagToSpool:(t,e)=>Ee(`/inventory/spools/${t}/link-tag`,{method:"PATCH",body:JSON.stringify(e)}),getSpoolUsageHistory:(t,e=50)=>Ee(`/inventory/spools/${t}/usage?limit=${e}`),getAllUsageHistory:(t=100,e)=>Ee(`/inventory/usage?limit=${t}${e?`&printer_id=${e}`:""}`),clearSpoolUsageHistory:t=>Ee(`/inventory/spools/${t}/usage`,{method:"DELETE"}),syncWeightsFromAms:()=>Ee("/inventory/sync-ams-weights",{method:"POST"}),getFilamentPresets:()=>Ee("/cloud/filaments"),getVersion:()=>Ee("/updates/version"),checkForUpdates:()=>Ee("/updates/check"),applyUpdate:()=>Ee("/updates/apply",{method:"POST"}),getUpdateStatus:()=>Ee("/updates/status"),getMaintenanceTypes:()=>Ee("/maintenance/types"),createMaintenanceType:t=>Ee("/maintenance/types",{method:"POST",body:JSON.stringify(t)}),updateMaintenanceType:(t,e)=>Ee(`/maintenance/types/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteMaintenanceType:t=>Ee(`/maintenance/types/${t}`,{method:"DELETE"}),restoreDefaultMaintenanceTypes:()=>Ee("/maintenance/types/restore-defaults",{method:"POST"}),getMaintenanceOverview:()=>Ee("/maintenance/overview"),getPrinterMaintenance:t=>Ee(`/maintenance/printers/${t}`),updateMaintenanceItem:(t,e)=>Ee(`/maintenance/items/${t}`,{method:"PATCH",body:JSON.stringify(e)}),performMaintenance:(t,e)=>Ee(`/maintenance/items/${t}/perform`,{method:"POST",body:JSON.stringify({notes:e})}),getMaintenanceHistory:t=>Ee(`/maintenance/items/${t}/history`),getMaintenanceSummary:()=>Ee("/maintenance/summary"),setPrinterHours:(t,e)=>Ee(`/maintenance/printers/${t}/hours?total_hours=${e}`,{method:"PATCH"}),assignMaintenanceType:(t,e)=>Ee(`/maintenance/printers/${t}/assign/${e}`,{method:"POST"}),removeMaintenanceItem:t=>Ee(`/maintenance/items/${t}`,{method:"DELETE"}),getCameraStreamToken:()=>Ee("/printers/camera/stream-token",{method:"POST"}),createLongLivedCameraToken:t=>Ee("/auth/tokens",{method:"POST",body:JSON.stringify({...t,scope:"camera_stream"})}),listMyLongLivedCameraTokens:()=>Ee("/auth/tokens"),listAllLongLivedCameraTokens:()=>Ee("/auth/tokens/all"),listLongLivedCameraTokensForUser:t=>Ee(`/auth/tokens?user_id=${t}`),revokeLongLivedCameraToken:t=>Ee(`/auth/tokens/${t}`,{method:"DELETE"}),getCameraStreamUrl:(t,e=10)=>Ta(`${Sn}/printers/${t}/camera/stream?fps=${e}`),getCameraSnapshotUrl:t=>Ta(`${Sn}/printers/${t}/camera/snapshot`),testCameraConnection:t=>Ee(`/printers/${t}/camera/test`),getCameraStatus:t=>Ee(`/printers/${t}/camera/status`),checkPlateEmpty:(t,e)=>{const n=new URLSearchParams;return n.set("use_external",String(e?.useExternal??!1)),n.set("include_debug_image",String(e?.includeDebugImage??!1)),Ee(`/printers/${t}/camera/check-plate?${n.toString()}`)},getPlateDetectionStatus:t=>Ee(`/printers/${t}/camera/plate-detection/status`),calibratePlateDetection:(t,e)=>{const n=new URLSearchParams;return e?.label&&n.set("label",e.label),n.set("use_external",String(e?.useExternal??!1)),Ee(`/printers/${t}/camera/plate-detection/calibrate?${n.toString()}`,{method:"POST"})},deletePlateCalibration:t=>Ee(`/printers/${t}/camera/plate-detection/calibrate`,{method:"DELETE"}),getPlateReferences:t=>Ee(`/printers/${t}/camera/plate-detection/references`),getPlateReferenceThumbnailUrl:(t,e)=>Ta(`${Sn}/printers/${t}/camera/plate-detection/references/${e}/thumbnail`),updatePlateReferenceLabel:(t,e,n)=>{const r=new URLSearchParams;return r.set("label",n),Ee(`/printers/${t}/camera/plate-detection/references/${e}?${r.toString()}`,{method:"PUT"})},deletePlateReference:(t,e)=>Ee(`/printers/${t}/camera/plate-detection/references/${e}`,{method:"DELETE"}),getExternalLinks:()=>Ee("/external-links/"),getExternalLink:t=>Ee(`/external-links/${t}`),createExternalLink:t=>Ee("/external-links/",{method:"POST",body:JSON.stringify(t)}),updateExternalLink:(t,e)=>Ee(`/external-links/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteExternalLink:t=>Ee(`/external-links/${t}`,{method:"DELETE"}),reorderExternalLinks:t=>Ee("/external-links/reorder",{method:"PUT",body:JSON.stringify({ids:t})}),uploadExternalLinkIcon:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/external-links/${t}/icon`,{method:"POST",headers:r,body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},deleteExternalLinkIcon:t=>Ee(`/external-links/${t}/icon`,{method:"DELETE"}),getExternalLinkIconUrl:t=>Ta(`${Sn}/external-links/${t}/icon`),getProjects:t=>{const e=new URLSearchParams;return t&&e.set("status",t),Ee(`/projects/?${e}`)},getProject:t=>Ee(`/projects/${t}`),createProject:t=>Ee("/projects/",{method:"POST",body:JSON.stringify(t)}),updateProject:(t,e)=>Ee(`/projects/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteProject:t=>Ee(`/projects/${t}`,{method:"DELETE"}),getProjectArchives:(t,e=100,n=0)=>Ee(`/projects/${t}/archives?limit=${e}&offset=${n}`),addArchivesToProject:(t,e)=>Ee(`/projects/${t}/add-archives`,{method:"POST",body:JSON.stringify({archive_ids:e})}),removeArchivesFromProject:(t,e)=>Ee(`/projects/${t}/remove-archives`,{method:"POST",body:JSON.stringify({archive_ids:e})}),addQueueItemsToProject:(t,e)=>Ee(`/projects/${t}/add-queue`,{method:"POST",body:JSON.stringify({queue_item_ids:e})}),uploadProjectAttachment:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/projects/${t}/attachments`,{method:"POST",headers:r,body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},getProjectAttachmentUrl:(t,e)=>`${Sn}/projects/${t}/attachments/${encodeURIComponent(e)}`,deleteProjectAttachment:(t,e)=>Ee(`/projects/${t}/attachments/${encodeURIComponent(e)}`,{method:"DELETE"}),getProjectCoverImageUrl:t=>Ta(`${Sn}/projects/${t}/cover-image`),uploadProjectCoverImage:async(t,e)=>{const n=new FormData;n.append("file",e);const r={};Nn&&(r.Authorization=`Bearer ${Nn}`);const i=await fetch(`${Sn}/projects/${t}/cover-image`,{method:"POST",headers:r,body:n});if(!i.ok){const s=await i.json().catch(()=>({}));throw new Error(s.detail||`HTTP ${i.status}`)}return i.json()},deleteProjectCoverImage:t=>Ee(`/projects/${t}/cover-image`,{method:"DELETE"}),getProjectBOM:t=>Ee(`/projects/${t}/bom`),createBOMItem:(t,e)=>Ee(`/projects/${t}/bom`,{method:"POST",body:JSON.stringify(e)}),updateBOMItem:(t,e,n)=>Ee(`/projects/${t}/bom/${e}`,{method:"PATCH",body:JSON.stringify(n)}),deleteBOMItem:(t,e)=>Ee(`/projects/${t}/bom/${e}`,{method:"DELETE"}),getTemplates:()=>Ee("/projects/templates/"),createTemplateFromProject:t=>Ee(`/projects/${t}/create-template`,{method:"POST"}),createProjectFromTemplate:(t,e)=>Ee(`/projects/from-template/${t}${e?`?name=${encodeURIComponent(e)}`:""}`,{method:"POST"}),getProjectTimeline:(t,e=50)=>Ee(`/projects/${t}/timeline?limit=${e}`),exportProjectJson:t=>Ee(`/projects/${t}/export?format=json`),importProject:t=>Ee("/projects/import",{method:"POST",body:JSON.stringify(t)}),importProjectFile:async t=>{const e=new FormData;e.append("file",t);const n={};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/projects/import/file`,{method:"POST",headers:n,body:e});if(!r.ok){const i=await r.json().catch(()=>({}));throw new Error(i.detail||`HTTP ${r.status}`)}return r.json()},exportProjectZip:async t=>{const e={};Nn&&(e.Authorization=`Bearer ${Nn}`);const n=await fetch(`${Sn}/projects/${t}/export`,{headers:e});if(!n.ok){const o=await n.json().catch(()=>({}));throw new Error(o.detail||`HTTP ${n.status}`)}const r=n.headers.get("Content-Disposition"),i=Tf(r)||`project_${t}.zip`;return{blob:await n.blob(),filename:i}},getAPIKeys:()=>Ee("/api-keys/"),createAPIKey:t=>Ee("/api-keys/",{method:"POST",body:JSON.stringify(t)}),updateAPIKey:(t,e)=>Ee(`/api-keys/${t}`,{method:"PATCH",body:JSON.stringify(e)}),deleteAPIKey:t=>Ee(`/api-keys/${t}`,{method:"DELETE"}),getAMSHistory:(t,e,n=24)=>Ee(`/ams-history/${t}/${e}?hours=${n}`),getSystemInfo:()=>Ee("/system/info"),getStorageUsage:t=>{const e=new URLSearchParams;t?.refresh&&e.set("refresh","true");const n=e.toString();return Ee(`/system/storage-usage${n?`?${n}`:""}`)},getLibraryFolders:()=>Ee("/library/folders"),createLibraryFolder:t=>Ee("/library/folders",{method:"POST",body:JSON.stringify(t)}),updateLibraryFolder:(t,e)=>Ee(`/library/folders/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteLibraryFolder:t=>Ee(`/library/folders/${t}`,{method:"DELETE"}),createExternalFolder:t=>Ee("/library/folders/external",{method:"POST",body:JSON.stringify(t)}),scanExternalFolder:t=>Ee(`/library/folders/${t}/scan`,{method:"POST"}),getLibraryFoldersByProject:t=>Ee(`/library/folders/by-project/${t}`),getLibraryFoldersByArchive:t=>Ee(`/library/folders/by-archive/${t}`),getLibraryFiles:(t,e=!0,n)=>{const r=new URLSearchParams;return t!=null&&r.set("folder_id",String(t)),n!==void 0&&r.set("project_id",String(n)),r.set("include_root",String(e)),Ee(`/library/files?${r}`)},getLibraryFile:t=>Ee(`/library/files/${t}`),uploadLibraryFile:async(t,e,n=!0)=>{const r=new FormData;r.append("file",t);const i=new URLSearchParams;e&&i.set("folder_id",String(e)),i.set("generate_stl_thumbnails",String(n));const s={};Nn&&(s.Authorization=`Bearer ${Nn}`);const o=await fetch(`${Sn}/library/files?${i}`,{method:"POST",headers:s,body:r});if(!o.ok){const l=await o.json().catch(()=>({}));throw new Error(l.detail||`HTTP ${o.status}`)}return o.json()},extractZipFile:async(t,e,n=!0,r=!1,i=!0)=>{const s=new FormData;s.append("file",t);const o=new URLSearchParams;e&&o.set("folder_id",String(e)),o.set("preserve_structure",String(n)),o.set("create_folder_from_zip",String(r)),o.set("generate_stl_thumbnails",String(i));const l={};Nn&&(l.Authorization=`Bearer ${Nn}`);const c=await fetch(`${Sn}/library/files/extract-zip?${o}`,{method:"POST",headers:l,body:s});if(!c.ok){const d=await c.json().catch(()=>({}));throw new Error(d.detail||`HTTP ${c.status}`)}return c.json()},updateLibraryFile:(t,e)=>Ee(`/library/files/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteLibraryFile:t=>Ee(`/library/files/${t}`,{method:"DELETE"}),previewLibraryPurge:(t,e=!0)=>Ee(`/library/purge/preview?older_than_days=${t}&include_never_printed=${e}`),executeLibraryPurge:(t,e=!0)=>Ee("/library/purge",{method:"POST",body:JSON.stringify({older_than_days:t,include_never_printed:e})}),listLibraryTrash:(t=100,e=0)=>Ee(`/library/trash?limit=${t}&offset=${e}`),restoreLibraryTrash:t=>Ee(`/library/trash/${t}/restore`,{method:"POST"}),hardDeleteLibraryTrash:t=>Ee(`/library/trash/${t}`,{method:"DELETE"}),emptyLibraryTrash:()=>Ee("/library/trash",{method:"DELETE"}),getLibraryTrashSettings:()=>Ee("/library/trash/settings"),updateLibraryTrashSettings:t=>Ee("/library/trash/settings",{method:"PUT",body:JSON.stringify(t)}),getLibraryFileDownloadUrl:t=>`${Sn}/library/files/${t}/download`,createLibrarySlicerToken:t=>Ee(`/library/files/${t}/slicer-token`,{method:"POST"}),getLibrarySlicerDownloadUrl:(t,e,n)=>`${Sn}/library/files/${t}/dl/${e}/${encodeURIComponent(n)}`,downloadLibraryFile:async(t,e)=>{const n={};Nn&&(n.Authorization=`Bearer ${Nn}`);const r=await fetch(`${Sn}/library/files/${t}/download`,{headers:n});if(!r.ok){const d=await r.json().catch(()=>({}));throw new Error(d.detail||`HTTP ${r.status}`)}const i=r.headers.get("Content-Disposition"),s=Tf(i)||e||`file_${t}`,o=await r.blob(),l=window.URL.createObjectURL(o),c=document.createElement("a");c.href=l,c.download=s,document.body.appendChild(c),c.click(),document.body.removeChild(c),window.URL.revokeObjectURL(l)},getLibraryFileThumbnailUrl:t=>Ta(`${Sn}/library/files/${t}/thumbnail`),getLibraryFilePlateThumbnail:(t,e)=>Ta(`${Sn}/library/files/${t}/plate-thumbnail/${e}`),getLibraryFileGcodeUrl:t=>`${Sn}/library/files/${t}/gcode`,moveLibraryFiles:(t,e)=>Ee("/library/files/move",{method:"POST",body:JSON.stringify({file_ids:t,folder_id:e})}),bulkDeleteLibrary:(t,e)=>Ee("/library/bulk-delete",{method:"POST",body:JSON.stringify({file_ids:t,folder_ids:e})}),getLibraryStats:()=>Ee("/library/stats"),batchGenerateStlThumbnails:t=>Ee("/library/generate-stl-thumbnails",{method:"POST",body:JSON.stringify(t)}),addLibraryFilesToQueue:t=>Ee("/library/files/add-to-queue",{method:"POST",body:JSON.stringify({file_ids:t})}),printLibraryFile:(t,e,n)=>Ee(`/library/files/${t}/print?printer_id=${e}`,{method:"POST",body:n?JSON.stringify(n):void 0}),cancelBackgroundDispatchJob:t=>Ee(`/background-dispatch/${t}`,{method:"DELETE"}),getLibraryFilePlates:t=>Ee(`/library/files/${t}/plates`),getLibraryFileFilamentRequirements:(t,e,n)=>{const r=new URLSearchParams;return e!==void 0&&r.set("plate_id",String(e)),n&&r.set("request_id",n),Ee(`/library/files/${t}/filament-requirements${r.toString()?`?${r}`:""}`)},getPreviewSliceProgress:async t=>{try{return await Ee(`/slicer/preview-progress/${encodeURIComponent(t)}`)}catch{return null}},getGitHubBackupConfig:()=>Ee("/github-backup/config"),saveGitHubBackupConfig:t=>Ee("/github-backup/config",{method:"POST",body:JSON.stringify(t)}),updateGitHubBackupConfig:t=>Ee("/github-backup/config",{method:"PATCH",body:JSON.stringify(t)}),deleteGitHubBackupConfig:()=>Ee("/github-backup/config",{method:"DELETE"}),testGitHubConnection:(t,e)=>Ee(`/github-backup/test?repo_url=${encodeURIComponent(t)}&token=${encodeURIComponent(e)}`,{method:"POST"}),testGitHubStoredConnection:()=>Ee("/github-backup/test-stored",{method:"POST"}),triggerGitHubBackup:()=>Ee("/github-backup/run",{method:"POST"}),getGitHubBackupStatus:()=>Ee("/github-backup/status"),getGitHubBackupLogs:(t=50)=>Ee(`/github-backup/logs?limit=${t}`),clearGitHubBackupLogs:(t=10)=>Ee(`/github-backup/logs?keep_last=${t}`,{method:"DELETE"}),getLocalBackupStatus:()=>Ee("/local-backup/status"),triggerLocalBackup:()=>Ee("/local-backup/run",{method:"POST"}),getLocalBackups:()=>Ee("/local-backup/backups"),downloadLocalBackup:async t=>{const e=await fetch(`${Sn}/local-backup/backups/${encodeURIComponent(t)}/download`,{headers:Nn?{Authorization:`Bearer ${Nn}`}:{}});if(!e.ok)throw new Error("Download failed");return{blob:await e.blob(),filename:t}},restoreLocalBackup:t=>Ee(`/local-backup/backups/${encodeURIComponent(t)}/restore`,{method:"POST"}),deleteLocalBackup:t=>Ee(`/local-backup/backups/${encodeURIComponent(t)}`,{method:"DELETE"}),getObicoStatus:()=>Ee("/obico/status"),testObicoConnection:t=>Ee("/obico/test-connection",{method:"POST",body:JSON.stringify({url:t})}),sliceLibraryFile:(t,e)=>Ee(`/library/files/${t}/slice`,{method:"POST",body:JSON.stringify(e)}),sliceArchive:(t,e)=>Ee(`/archives/${t}/slice`,{method:"POST",body:JSON.stringify(e)}),getSliceJob:t=>Ee(`/slice-jobs/${t}`),getSlicerPresets:()=>Ee("/slicer/presets"),getLocalPresets:()=>Ee("/local-presets/"),getLocalPresetDetail:t=>Ee(`/local-presets/${t}`),importLocalPresets:t=>fetch(`${Sn}/local-presets/import`,{method:"POST",headers:Nn?{Authorization:`Bearer ${Nn}`}:{},body:t}).then(async e=>{if(!e.ok){const n=await e.json().catch(()=>({}));throw new Error(n.detail||`HTTP ${e.status}`)}return e.json()}),createLocalPreset:t=>Ee("/local-presets/",{method:"POST",body:JSON.stringify(t)}),updateLocalPreset:(t,e)=>Ee(`/local-presets/${t}`,{method:"PUT",body:JSON.stringify(e)}),deleteLocalPreset:t=>Ee(`/local-presets/${t}`,{method:"DELETE"}),refreshBaseProfileCache:()=>Ee("/local-presets/base-cache/refresh",{method:"POST"})},md={getInfo:()=>Ee("/discovery/info"),getStatus:()=>Ee("/discovery/status"),startDiscovery:(t=10)=>Ee(`/discovery/start?duration=${t}`,{method:"POST"}),stopDiscovery:()=>Ee("/discovery/stop",{method:"POST"}),getDiscoveredPrinters:()=>Ee("/discovery/printers"),startSubnetScan:(t,e=1)=>Ee("/discovery/scan",{method:"POST",body:JSON.stringify({subnet:t,timeout:e})}),getScanStatus:()=>Ee("/discovery/scan/status"),stopSubnetScan:()=>Ee("/discovery/scan/stop",{method:"POST"})},CF={getSettings:()=>Ee("/settings/virtual-printer"),getModels:()=>Ee("/settings/virtual-printer/models"),updateSettings:t=>{const e=new URLSearchParams;return t.enabled!==void 0&&e.set("enabled",String(t.enabled)),t.access_code!==void 0&&e.set("access_code",t.access_code),t.mode!==void 0&&e.set("mode",t.mode),t.model!==void 0&&e.set("model",t.model),t.target_printer_id!==void 0&&e.set("target_printer_id",String(t.target_printer_id)),t.remote_interface_ip!==void 0&&e.set("remote_interface_ip",t.remote_interface_ip),t.tailscale_disabled!==void 0&&e.set("tailscale_disabled",String(t.tailscale_disabled)),t.archive_name_source!==void 0&&e.set("archive_name_source",t.archive_name_source),Ee(`/settings/virtual-printer?${e.toString()}`,{method:"PUT"})}},LN={list:()=>Ee("/virtual-printers"),get:t=>Ee(`/virtual-printers/${t}`),create:t=>Ee("/virtual-printers",{method:"POST",body:JSON.stringify(t)}),update:(t,e)=>Ee(`/virtual-printers/${t}`,{method:"PUT",body:JSON.stringify(e)}),remove:t=>Ee(`/virtual-printers/${t}`,{method:"DELETE"}),getTailscaleStatus:()=>Ee("/virtual-printers/tailscale-status")},vx={list:()=>Ee("/pending-uploads/"),getCount:()=>Ee("/pending-uploads/count"),get:t=>Ee(`/pending-uploads/${t}`),archive:(t,e)=>Ee(`/pending-uploads/${t}/archive`,{method:"POST",body:JSON.stringify(e||{})}),discard:t=>Ee(`/pending-uploads/${t}`,{method:"DELETE"}),archiveAll:()=>Ee("/pending-uploads/archive-all",{method:"POST"}),discardAll:()=>Ee("/pending-uploads/discard-all",{method:"DELETE"})},Gk={checkUpdates:()=>Ee("/firmware/updates"),checkPrinterUpdate:t=>Ee(`/firmware/updates/${t}`),prepareUpload:(t,e)=>Ee(`/firmware/updates/${t}/prepare${e?`?version=${encodeURIComponent(e)}`:""}`),startUpload:(t,e)=>Ee(`/firmware/updates/${t}/upload${e?`?version=${encodeURIComponent(e)}`:""}`,{method:"POST"}),getUploadStatus:t=>Ee(`/firmware/updates/${t}/upload/status`)},Lx={getDebugLoggingState:()=>Ee("/support/debug-logging"),setDebugLogging:t=>Ee("/support/debug-logging",{method:"POST",body:JSON.stringify({enabled:t})}),downloadSupportBundle:async()=>{const t={};Nn&&(t.Authorization=`Bearer ${Nn}`);const e=await fetch(`${Sn}/support/bundle`,{headers:t});if(!e.ok){const l=await e.json().catch(()=>({}));throw new Error(l.detail||`HTTP ${e.status}`)}const n=e.headers.get("Content-Disposition"),r=Tf(n)||"bambuddy-support.zip",i=await e.blob(),s=window.URL.createObjectURL(i),o=document.createElement("a");o.href=s,o.download=r,document.body.appendChild(o),o.click(),document.body.removeChild(o),window.URL.revokeObjectURL(s)},getLogs:t=>{const e=new URLSearchParams;t?.limit&&e.set("limit",t.limit.toString()),t?.level&&e.set("level",t.level),t?.search&&e.set("search",t.search);const n=e.toString();return Ee(`/support/logs${n?`?${n}`:""}`)},clearLogs:()=>Ee("/support/logs",{method:"DELETE"})},Wr={getDevices:()=>Ee("/spoolbuddy/devices"),deleteDevice:t=>Ee(`/spoolbuddy/devices/${t}`,{method:"DELETE"}),tare:t=>Ee(`/spoolbuddy/devices/${t}/calibration/tare`,{method:"POST",body:"{}"}),getCalibration:t=>Ee(`/spoolbuddy/devices/${t}/calibration`),setCalibrationFactor:(t,e,n,r)=>Ee(`/spoolbuddy/devices/${t}/calibration/set-factor`,{method:"POST",body:JSON.stringify({known_weight_grams:e,raw_adc:n,tare_raw_adc:r})}),updateSpoolWeight:(t,e)=>Ee("/spoolbuddy/scale/update-spool-weight",{method:"POST",body:JSON.stringify({spool_id:t,weight_grams:e})}),updateDisplay:(t,e,n)=>Ee(`/spoolbuddy/devices/${t}/display`,{method:"PUT",body:JSON.stringify({brightness:e,blank_timeout:n})}),updateSystemConfig:(t,e,n)=>Ee(`/spoolbuddy/devices/${t}/system/config`,{method:"POST",body:JSON.stringify({backend_url:e,...n?{api_key:n}:{}})}),checkDaemonUpdate:t=>Ee(`/spoolbuddy/devices/${t}/update-check`),triggerUpdate:t=>Ee(`/spoolbuddy/devices/${t}/update`,{method:"POST",body:"{}"}),getSSHPublicKey:()=>Ee("/spoolbuddy/ssh/public-key"),writeTag:(t,e)=>Ee("/spoolbuddy/nfc/write-tag",{method:"POST",body:JSON.stringify({device_id:t,spool_id:e})}),cancelWrite:t=>Ee(`/spoolbuddy/devices/${t}/cancel-write`,{method:"POST",body:"{}"}),systemCommand:(t,e)=>Ee(`/spoolbuddy/devices/${t}/system/command`,{method:"POST",body:JSON.stringify({command:e})}),queueDiagnostics:(t,e)=>Ee(`/spoolbuddy/diagnostics/${t}/run?diagnostic=${e}`,{method:"POST",body:"{}"}),getDiagnosticResult:(t,e)=>Ee(`/spoolbuddy/diagnostics/${t}/result?diagnostic=${e}`,{method:"GET"})},zM={submit:t=>Ee("/bug-report/submit",{method:"POST",body:JSON.stringify(t)}),startLogging:()=>Ee("/bug-report/start-logging",{method:"POST"}),stopLogging:t=>Ee(`/bug-report/stop-logging?was_debug=${t}`,{method:"POST"})},wJ=w.createContext(void 0);function $ye({children:t}){const[e,n]=w.useState(()=>{const T=localStorage.getItem("theme-mode"),F=localStorage.getItem("theme");return T||F||"dark"}),[r,i]=w.useState(()=>localStorage.getItem("dark-style")||"classic"),[s,o]=w.useState(()=>localStorage.getItem("dark-background")||"neutral"),[l,c]=w.useState(()=>localStorage.getItem("dark-accent")||"green"),[d,u]=w.useState(()=>localStorage.getItem("light-style")||"classic"),[m,p]=w.useState(()=>localStorage.getItem("light-background")||"neutral"),[f,x]=w.useState(()=>localStorage.getItem("light-accent")||"green");w.useEffect(()=>{oe.getSettings().then(T=>{T.dark_style&&(i(T.dark_style),localStorage.setItem("dark-style",T.dark_style)),T.dark_background&&(o(T.dark_background),localStorage.setItem("dark-background",T.dark_background)),T.dark_accent&&(c(T.dark_accent),localStorage.setItem("dark-accent",T.dark_accent)),T.light_style&&(u(T.light_style),localStorage.setItem("light-style",T.light_style)),T.light_background&&(p(T.light_background),localStorage.setItem("light-background",T.light_background)),T.light_accent&&(x(T.light_accent),localStorage.setItem("light-accent",T.light_accent))}).catch(()=>{})},[]),w.useEffect(()=>{const T=document.documentElement;T.classList.remove("dark","style-classic","style-glow","style-vibrant","bg-neutral","bg-warm","bg-cool","bg-oled","bg-slate","bg-forest","accent-green","accent-teal","accent-blue","accent-orange","accent-purple","accent-red"),e==="dark"?(T.classList.add("dark"),T.classList.add(`style-${r}`),T.classList.add(`bg-${s}`),T.classList.add(`accent-${l}`)):(T.classList.add(`style-${d}`),T.classList.add(`bg-${m}`),T.classList.add(`accent-${f}`)),localStorage.setItem("theme-mode",e),localStorage.removeItem("theme")},[e,r,s,l,d,m,f]);const v=()=>n(T=>T==="dark"?"light":"dark"),b=T=>n(T),g=T=>{i(T),localStorage.setItem("dark-style",T),oe.updateSettings({dark_style:T}).catch(()=>{})},S=T=>{o(T),localStorage.setItem("dark-background",T),oe.updateSettings({dark_background:T}).catch(()=>{})},N=T=>{c(T),localStorage.setItem("dark-accent",T),oe.updateSettings({dark_accent:T}).catch(()=>{})},P=T=>{u(T),localStorage.setItem("light-style",T),oe.updateSettings({light_style:T}).catch(()=>{})},C=T=>{p(T),localStorage.setItem("light-background",T),oe.updateSettings({light_background:T}).catch(()=>{})},A=T=>{x(T),localStorage.setItem("light-accent",T),oe.updateSettings({light_accent:T}).catch(()=>{})};return a.jsx(wJ.Provider,{value:{mode:e,darkStyle:r,darkBackground:s,darkAccent:l,lightStyle:d,lightBackground:m,lightAccent:f,toggleMode:v,setMode:b,setDarkStyle:g,setDarkBackground:S,setDarkAccent:N,setLightStyle:P,setLightBackground:C,setLightAccent:A},children:t})}function Gg(){const t=w.useContext(wJ);if(!t)throw new Error("useTheme must be used within ThemeProvider");return t}const aO=w.createContext("normal");function Vye({density:t,children:e}){return a.jsx(aO.Provider,{value:t,children:e})}function wt({children:t,className:e="",onClick:n,onContextMenu:r,...i}){return a.jsx("div",{className:`bg-bambu-dark-secondary rounded-xl border border-bambu-dark-tertiary card-shadow ${e}`,onClick:n,onContextMenu:r,...i,children:t})}function pn({children:t,className:e="",dense:n}){const r=w.useContext(aO)==="dense",s=n??r?"px-4 py-2.5":"px-6 py-4";return a.jsx("div",{className:`${s} border-b border-bambu-dark-tertiary ${e}`,children:t})}function St({children:t,className:e="",dense:n}){const r=w.useContext(aO)==="dense",s=n??r?"p-4":"p-6";return a.jsx("div",{className:`${s} ${e}`,children:t})}function Gye(t,e,n){return[{category:"Navigation",items:t?t.slice(0,9).map((i,s)=>({keys:[String(s+1)],description:i.type==="external"?`Open ${i.label}`:`Go to ${i.labelKey?n(i.labelKey):i.label}`,isExternal:i.type==="external"})):e?e.map((i,s)=>({keys:[String(s+1)],description:`Go to ${n(i.labelKey)}`,isExternal:!1})):[{keys:["1"],description:"Go to Printers",isExternal:!1},{keys:["2"],description:"Go to Archives",isExternal:!1},{keys:["3"],description:"Go to Queue",isExternal:!1},{keys:["4"],description:"Go to Statistics",isExternal:!1},{keys:["5"],description:"Go to Cloud Profiles",isExternal:!1},{keys:["6"],description:"Go to Settings",isExternal:!1}]},{category:"Archives",items:[{keys:["/"],description:"Focus search",isExternal:!1},{keys:["U"],description:"Open upload modal",isExternal:!1},{keys:["Esc"],description:"Clear selection / blur input",isExternal:!1},{keys:["Right-click"],description:"Context menu on cards",isExternal:!1}]},{category:"K-Profiles",items:[{keys:["R"],description:"Refresh profiles",isExternal:!1},{keys:["N"],description:"New profile",isExternal:!1},{keys:["Esc"],description:"Exit selection mode",isExternal:!1}]},{category:"General",items:[{keys:["?"],description:"Show this help",isExternal:!1}]}]}function QH({children:t}){return a.jsx("kbd",{className:"px-2 py-1 text-xs font-mono bg-bambu-dark border border-bambu-dark-tertiary rounded text-white",children:t})}function Wye({onClose:t,navItems:e,sidebarItems:n}){const{t:r}=_t(),i=Gye(n,e,r);return w.useEffect(()=>{const s=o=>{o.key==="Escape"&&t()};return window.addEventListener("keydown",s),()=>window.removeEventListener("keydown",s)},[t]),a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4",onClick:t,children:a.jsx(wt,{className:"w-full max-w-md",onClick:s=>s.stopPropagation(),children:a.jsxs(St,{className:"p-0",children:[a.jsxs("div",{className:"flex items-center justify-between p-4 border-b border-bambu-dark-tertiary",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(yF,{className:"w-5 h-5 text-bambu-green"}),a.jsx("h2",{className:"text-xl font-semibold text-white",children:"Keyboard Shortcuts"})]}),a.jsx("button",{onClick:t,className:"text-bambu-gray hover:text-white transition-colors",children:a.jsx(Bt,{className:"w-5 h-5"})})]}),a.jsx("div",{className:"p-4 space-y-6 max-h-[60vh] overflow-y-auto",children:i.map(s=>a.jsxs("div",{children:[a.jsx("h3",{className:"text-sm font-medium text-bambu-gray mb-3",children:s.category}),a.jsx("div",{className:"space-y-2",children:s.items.map(o=>a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("span",{className:"text-white text-sm flex items-center gap-1.5",children:[o.description,o.isExternal&&a.jsx(Ar,{className:"w-3 h-3 text-bambu-gray"})]}),a.jsx("div",{className:"flex gap-1",children:o.keys.map(l=>a.jsx(QH,{children:l},l))})]},o.description))})]},s.category))}),a.jsx("div",{className:"p-4 border-t border-bambu-dark-tertiary",children:a.jsxs("p",{className:"text-xs text-bambu-gray text-center",children:["Press ",a.jsx(QH,{children:"Esc"})," or click outside to close"]})})]})})})}function De({variant:t="primary",size:e="md",className:n="",children:r,...i}){const s="inline-flex items-center justify-center font-medium rounded-lg transition-colors focus:outline-none focus:ring-2 focus:ring-offset-2 focus:ring-offset-bambu-dark disabled:opacity-50 disabled:cursor-not-allowed",o={primary:"bg-bambu-green hover:bg-bambu-green-light text-white focus:ring-bambu-green",secondary:"bg-bambu-dark-tertiary hover:bg-bambu-gray-dark text-white focus:ring-bambu-gray",danger:"bg-red-600 hover:bg-red-700 text-white focus:ring-red-500",ghost:"bg-transparent hover:bg-bambu-dark-tertiary text-bambu-gray-light hover:text-white"},l={sm:"px-3 py-1.5 text-sm gap-1.5 min-h-[44px] md:min-h-0",md:"px-4 py-2 text-sm gap-2 min-h-[44px] md:min-h-0",lg:"px-6 py-3 text-base gap-2 min-h-[48px] md:min-h-0"};return a.jsx("button",{className:`${s} ${o[t]} ${l[e]} ${n}`,...i,children:r})}function yn({title:t,message:e,confirmText:n,cancelText:r,cancelVariant:i,cardClassName:s,variant:o="default",isLoading:l=!1,loadingText:c,onConfirm:d,onCancel:u}){const{t:m}=_t(),p=n??m("common.confirm"),f=r??m("common.cancel"),x=c??m("common.loading");w.useEffect(()=>{const g=S=>{S.key==="Escape"&&!l&&u()};return window.addEventListener("keydown",g),()=>window.removeEventListener("keydown",g)},[u,l]);const b={danger:{icon:"text-red-400",button:"bg-red-500 hover:bg-red-600"},warning:{icon:"text-yellow-400",button:"bg-yellow-500 hover:bg-yellow-600 text-black"},default:{icon:"text-bambu-green",button:"bg-bambu-green hover:bg-bambu-green-dark"}}[o];return a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4",onClick:l?void 0:u,children:a.jsx(wt,{className:`w-full max-w-md ${s??""}`,onClick:g=>g.stopPropagation(),children:a.jsxs(St,{className:"p-6",children:[a.jsxs("div",{className:"flex items-start gap-4",children:[a.jsx("div",{className:`p-2 rounded-full bg-bambu-dark ${b.icon}`,children:a.jsx(Cn,{className:"w-6 h-6"})}),a.jsxs("div",{className:"flex-1",children:[a.jsx("h3",{className:"text-lg font-semibold text-white mb-2",children:t}),a.jsx("p",{className:"text-bambu-gray text-sm whitespace-pre-line",children:e})]})]}),a.jsxs("div",{className:"flex gap-3 mt-6",children:[a.jsx(De,{variant:i??"secondary",onClick:u,className:"flex-1",disabled:l,children:f}),a.jsx(De,{onClick:d,className:`flex-1 ${b.button}`,disabled:l,children:l?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-4 h-4 mr-2 animate-spin"}),x]}):p})]})]})})})}function Kye({plug:t}){const e=tn(),[n,r]=w.useState(null),{data:i,isLoading:s}=Qe({queryKey:["smart-plug-status",t.id],queryFn:()=>oe.getSmartPlugStatus(t.id),refetchInterval:1e4}),o=ot({mutationFn:f=>oe.controlSmartPlug(t.id,f),onSuccess:()=>{e.invalidateQueries({queryKey:["smart-plug-status",t.id]})}}),l=i?.state==="ON",c=t.plug_type==="mqtt"&&i?.energy?.power!==null&&i?.energy?.power!==void 0,d=(i?.reachable??!1)||c,u=o.isPending,m=t.plug_type==="mqtt",p=()=>{n&&(o.mutate(n),r(null))};return a.jsxs(a.Fragment,{children:[a.jsxs("div",{className:"flex items-center justify-between py-2 px-3 hover:bg-bambu-dark-tertiary rounded-lg transition-colors",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("div",{className:`p-1.5 rounded ${m?d?"bg-teal-500/20":"bg-red-500/20":d?l?"bg-bambu-green/20":"bg-bambu-dark":"bg-red-500/20"}`,children:m?a.jsx(eO,{className:`w-4 h-4 ${d?"text-teal-400":"text-red-400"}`}):a.jsx(tc,{className:`w-4 h-4 ${d?l?"text-bambu-green":"text-bambu-gray":"text-red-400"}`})}),a.jsxs("div",{children:[a.jsx("p",{className:"text-sm text-white font-medium",children:t.name}),a.jsx("div",{className:"flex items-center gap-1 text-xs",children:s?a.jsx(mt,{className:"w-3 h-3 text-bambu-gray animate-spin"}):m?d?a.jsxs(a.Fragment,{children:[a.jsx(cc,{className:"w-3 h-3 text-teal-400"}),a.jsxs("span",{className:"text-teal-400",children:[Math.round(i?.energy?.power??0),"W"]}),a.jsx("span",{className:"text-bambu-gray mx-1",children:"|"}),a.jsx(pl,{className:"w-3 h-3 text-bambu-gray"}),a.jsx("span",{className:"text-bambu-gray",children:"Monitor"})]}):a.jsxs(a.Fragment,{children:[a.jsx(qd,{className:"w-3 h-3 text-status-error"}),a.jsx("span",{className:"text-status-error",children:"Waiting"})]}):d?a.jsxs(a.Fragment,{children:[a.jsx(cp,{className:"w-3 h-3 text-status-ok"}),a.jsx("span",{className:l?"text-status-ok":"text-bambu-gray",children:i?.state||"Unknown"}),i?.energy?.power!==null&&i?.energy?.power!==void 0&&a.jsxs(a.Fragment,{children:[a.jsx("span",{className:"text-bambu-gray mx-1",children:"|"}),a.jsx(cc,{className:"w-3 h-3 text-yellow-400"}),a.jsxs("span",{className:"text-yellow-400",children:[Math.round(i.energy.power),"W"]})]})]}):a.jsxs(a.Fragment,{children:[a.jsx(qd,{className:"w-3 h-3 text-status-error"}),a.jsx("span",{className:"text-status-error",children:"Offline"})]})})]})]}),!m&&a.jsxs("div",{className:"flex gap-1",children:[a.jsx("button",{onClick:()=>r("on"),disabled:!d||u,className:`p-1.5 rounded transition-colors ${l?"bg-bambu-green text-white":"bg-bambu-dark text-bambu-gray hover:text-white"} disabled:opacity-50 disabled:cursor-not-allowed`,title:"Turn On",children:u?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Jd,{className:"w-4 h-4"})}),a.jsx("button",{onClick:()=>r("off"),disabled:!d||u,className:`p-1.5 rounded transition-colors ${!l&&d?"bg-bambu-dark-tertiary text-white":"bg-bambu-dark text-bambu-gray hover:text-white"} disabled:opacity-50 disabled:cursor-not-allowed`,title:"Turn Off",children:u?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(dS,{className:"w-4 h-4"})})]})]}),n&&a.jsx(yn,{title:`Turn ${n==="on"?"On":"Off"} Smart Plug`,message:`Are you sure you want to turn ${n==="on"?"on":"off"} "${t.name}"?`,confirmText:n==="on"?"Turn On":"Turn Off",variant:n==="off"?"warning":"default",onConfirm:p,onCancel:()=>r(null)})]})}function JH({onClose:t}){const{t:e}=_t(),{data:n,isLoading:r}=Qe({queryKey:["smart-plugs"],queryFn:oe.getSmartPlugs}),i=n?.filter(s=>s.show_in_switchbar)||[];return a.jsxs("div",{className:"absolute bottom-full left-0 mb-2 w-72 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-xl shadow-xl z-50",onMouseLeave:t,children:[a.jsx("div",{className:"px-4 py-3 border-b border-bambu-dark-tertiary",children:a.jsxs("h3",{className:"text-sm font-semibold text-white flex items-center gap-2",children:[a.jsx(tc,{className:"w-4 h-4 text-bambu-green"}),"Smart Switches"]})}),a.jsx("div",{className:"p-2 max-h-80 overflow-y-auto",children:r?a.jsx("div",{className:"flex items-center justify-center py-8",children:a.jsx(mt,{className:"w-6 h-6 text-bambu-gray animate-spin"})}):i.length===0?a.jsxs("div",{className:"text-center py-6 px-4",children:[a.jsx(tc,{className:"w-8 h-8 text-bambu-gray mx-auto mb-2"}),a.jsx("p",{className:"text-sm text-bambu-gray",children:e("smartPlugs.noSwitchesInSwitchbar")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:e("smartPlugs.enableSwitchbarHint")})]}):a.jsx("div",{className:"space-y-1",children:i.map(s=>a.jsx(Kye,{plug:s},s.id))})})]})}const SJ=[{name:"globe",icon:qs},{name:"link",icon:Ty},{name:"external-link",icon:Ar},{name:"book",icon:ofe},{name:"file-text",icon:Ns},{name:"home",icon:iS},{name:"star",icon:bg},{name:"heart",icon:pbe},{name:"bookmark",icon:cfe},{name:"shopping-cart",icon:mJ},{name:"music",icon:SF},{name:"video",icon:FN},{name:"image",icon:Bd},{name:"camera",icon:Qx},{name:"map",icon:Bbe},{name:"compass",icon:ige},{name:"coffee",icon:Jfe},{name:"gift",icon:Zge},{name:"wrench",icon:xg},{name:"zap",icon:cc},{name:"cloud",icon:qg},{name:"database",icon:Jl},{name:"folder",icon:iJ},{name:"mail",icon:xm},{name:"phone",icon:mxe},{name:"user",icon:vm},{name:"users",icon:Ku},{name:"server",icon:Pf},{name:"terminal",icon:gJ},{name:"code",icon:Py}];function nT(t){return SJ.find(n=>n.name===t)?.icon||Ty}function Xye({value:t,onChange:e}){const[n,r]=w.useState(!1),i=nT(t);return a.jsxs("div",{className:"relative",children:[a.jsxs("button",{type:"button",onClick:()=>r(!n),className:"flex items-center gap-2 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white hover:border-bambu-gray focus:border-bambu-green focus:outline-none w-full",children:[a.jsx(i,{className:"w-5 h-5"}),a.jsx("span",{className:"text-sm text-bambu-gray flex-1 text-left",children:t})]}),n&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-40",onClick:()=>r(!1)}),a.jsx("div",{className:"absolute z-50 mt-1 w-full max-h-64 overflow-y-auto bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg",children:a.jsx("div",{className:"grid grid-cols-5 gap-1 p-2",children:SJ.map(({name:s,icon:o})=>a.jsx("button",{type:"button",onClick:()=>{e(s),r(!1)},className:`p-2 rounded-lg transition-colors flex items-center justify-center ${t===s?"bg-bambu-green text-white":"hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white"}`,title:s,children:a.jsx(o,{className:"w-5 h-5"})},s))})})]})]})}const ZH=1144;function Yye(){const[t,e]=w.useState(()=>typeof window<"u"?window.innerWidth<ZH:!1);return w.useEffect(()=>{const n=window.matchMedia(`(max-width: ${ZH-1}px)`),r=i=>{e(i.matches)};return e(n.matches),n.addEventListener("change",r),()=>n.removeEventListener("change",r)},[]),t}let iO={},_J=0;const PF=new Set;function Qye(t){const e={};for(const[n,r]of Object.entries(t)){if(!n||!r)continue;const i=n.replace("#","").toLowerCase().slice(0,6);i.length===6&&(e[i]=r)}iO=e,_J+=1;for(const n of Array.from(PF))n()}function Jye(t){return PF.add(t),()=>{PF.delete(t)}}function e6(){return _J}function t6(t){if(!t||t.length<6)return"Unknown";const e=t.replace("#",""),n=parseInt(e.substring(0,2),16),r=parseInt(e.substring(2,4),16),i=parseInt(e.substring(4,6),16),s=Math.max(n,r,i)/255,o=Math.min(n,r,i)/255,l=(s+o)/2;let c=0,d=0;if(s!==o){const u=s-o;d=l>.5?u/(2-s-o):u/(s+o);const m=n/255,p=r/255,f=i/255;s===m?c=((p-f)/u+(p<f?6:0))/6:s===p?c=((f-m)/u+2)/6:c=((m-p)/u+4)/6}return c=c*360,l<.15?"Black":l>.85?"White":d<.15?l<.4?"Dark Gray":l>.6?"Light Gray":"Gray":c>=15&&c<45&&l<.45||c>=45&&c<70&&l<.4?"Brown":c<15||c>=345?"Red":c<45?"Orange":c<70?"Yellow":c<150?"Green":c<200?"Cyan":c<260?"Blue":c<290?"Purple":"Pink"}function nc(t){if(!t)return t6(t);const e=t.replace("#","").toLowerCase().substring(0,6),n=iO[e];return n||t6(t)}function rT(t,e){if(t&&!/^[A-Z]\d+-[A-Z]\d+$/.test(t))return t;if(e&&e.length>=6){const n=e.substring(0,6).toLowerCase(),r=iO[n];if(r)return r}return null}function sO(t){if(!t||t==="00000000"||t.length<6)return null;const e=t.slice(0,2),n=t.slice(2,4),r=t.slice(4,6),i=t.length>=8?parseInt(t.slice(6,8),16)/255:1;return i===0?null:`rgba(${parseInt(e,16)}, ${parseInt(n,16)}, ${parseInt(r,16)}, ${i})`}function kJ(t){if(!t||t.length<6)return!1;const e=t.replace("#",""),n=parseInt(e.slice(0,2),16),r=parseInt(e.slice(2,4),16),i=parseInt(e.slice(4,6),16);return(.299*n+.587*r+.114*i)/255>.6}function NJ(){return w.useSyncExternalStore(Jye,e6,e6)}const CJ=w.createContext(void 0);function Zye({children:t}){const[e,n]=w.useState(null),[r,i]=w.useState(!1),[s,o]=w.useState(!1),[l,c]=w.useState(!0),d=w.useRef(!1),u=w.useRef(!0),m=async()=>{try{const T=new URLSearchParams(window.location.search),F=T.get("token");if(F){jh(F,"session"),T.delete("token");const E=T.toString(),$=window.location.pathname+(E?`?${E}`:"")+window.location.hash;window.history.replaceState({},"",$)}const k=await oe.getAuthStatus();if(!u.current)return;if(i(k.auth_enabled),o(k.requires_setup),k.auth_enabled){const E=wm();if(E)try{const $=await oe.getCurrentUser();if(!u.current)return;n($),F&&E===F&&jh(F,"persistent")}catch{if(jh(null),!u.current)return;n(null)}else n(null)}else n(null)}catch{if(!u.current)return;i(!1),n(null)}finally{u.current&&c(!1)}};w.useEffect(()=>(u.current=!0,m(),()=>{u.current=!1}),[]),w.useEffect(()=>{if(!l&&s&&!r){const T=window.location.pathname;T!=="/setup"&&!T.startsWith("/camera/")&&!d.current&&(d.current=!0,window.location.href="/setup")}else s||(d.current=!1)},[l,s,r]);const p=async(T,F,k="session")=>{const E=await oe.login({username:T,password:F});return!E.requires_2fa&&E.access_token&&(jh(E.access_token,k),await m()),E},f=(T,F,k="session")=>{jh(T,k),n(F),i(!0)},x=()=>{jh(null),n(null),oe.logout().catch(()=>{}),window.location.href="/login"},v=async()=>{if(r&&wm())try{const T=await oe.getCurrentUser();u.current&&n(T)}catch{jh(null),u.current&&n(null)}},b=async()=>{await m()},g=w.useMemo(()=>new Set(e?.permissions??[]),[e?.permissions]),S=w.useMemo(()=>r?e?.is_admin??!1:!0,[r,e?.is_admin]),N=w.useCallback(T=>!r||S?!0:g.has(T),[r,S,g]),P=w.useCallback((...T)=>!r||S?!0:T.some(F=>g.has(F)),[r,S,g]),C=w.useCallback((...T)=>!r||S?!0:T.every(F=>g.has(F)),[r,S,g]),A=w.useCallback((T,F,k)=>{if(!r||S)return!0;const E=`${T}:${F}_all`,$=`${T}:${F}_own`;return g.has(E)?!0:g.has($)?k==null?!1:k===e?.id:!1},[r,S,g,e?.id]);return a.jsx(CJ.Provider,{value:{user:e,authEnabled:r,requiresSetup:s,loading:l,isAdmin:S,login:p,loginWithToken:f,logout:x,refreshUser:v,refreshAuth:b,hasPermission:N,hasAnyPermission:P,hasAllPermissions:C,canModify:A},children:t})}function gr(){const t=w.useContext(CJ);if(t===void 0)throw new Error("useAuth must be used within an AuthProvider");return t}function Yi(t){if(!Number.isFinite(t)||t<=0)return"0 B";const e=["B","KB","MB","GB","TB"],n=1024,r=Math.floor(Math.log(t)/Math.log(n)),i=t/Math.pow(n,r);return r===0?`${i} ${e[r]}`:`${i.toFixed(1)} ${e[r]}`}const PJ=w.createContext(void 0);function rn(){const t=w.useContext(PJ);if(!t)throw new Error("useToast must be used within a ToastProvider");return t}const n6={success:a.jsx(wr,{className:"w-5 h-5 text-green-400"}),error:a.jsx(Da,{className:"w-5 h-5 text-red-400"}),warning:a.jsx(Oa,{className:"w-5 h-5 text-yellow-400"}),info:a.jsx(Cs,{className:"w-5 h-5 text-blue-400"}),loading:a.jsx(mt,{className:"w-5 h-5 text-bambu-green animate-spin"})},eve={success:"bg-green-500/10 border-green-500/30",error:"bg-red-500/10 border-red-500/30",warning:"bg-yellow-500/10 border-yellow-500/30",info:"bg-blue-500/10 border-blue-500/30",loading:"bg-bambu-green/10 border-bambu-green/30"};function tve({children:t}){const{t:e}=_t(),[n,r]=w.useState([]),[i,s]=w.useState(!1),[o,l]=w.useState(!1),[c,d]=w.useState(new Set),u=w.useRef(new Map),m="background-dispatch",p=w.useRef(null),f=w.useRef(!0);w.useEffect(()=>{f.current=!0;const S=u.current;return()=>{f.current=!1,S.forEach(N=>clearTimeout(N)),S.clear()}},[]);const x=w.useCallback((S,N="success")=>{if(!f.current)return;const P=Math.random().toString(36).substr(2,9);r(A=>[...A,{id:P,message:S,type:N}]);const C=setTimeout(()=>{f.current&&(r(A=>A.filter(T=>T.id!==P)),u.current.delete(P))},3e3);u.current.set(P,C)},[]),v=w.useCallback((S,N,P="info")=>{f.current&&r(C=>C.find(T=>T.id===S)?C.map(T=>T.id===S?{...T,message:N,type:P,persistent:!0}:T):[...C,{id:S,message:N,type:P,persistent:!0}])},[]),b=w.useCallback(S=>{if(!f.current)return;const N=u.current.get(S);N&&(clearTimeout(N),u.current.delete(S)),r(P=>P.filter(C=>C.id!==S))},[]),g=w.useCallback(async S=>{d(N=>{const P=new Set(N);return P.add(S),P});try{const N=await oe.cancelBackgroundDispatchJob(S);x(N.status==="cancelling"?e("backgroundDispatch.toast.cancellingUpload"):e("backgroundDispatch.toast.cancelled"),"info")}catch(N){const P=N instanceof Error?N.message:e("backgroundDispatch.toast.cancelFailed");x(P,"error")}finally{d(N=>{const P=new Set(N);return P.delete(S),P})}},[x,e]);return w.useEffect(()=>{const S=(C,A,T)=>{const F=C.findIndex(E=>E.jobId===A);if(F===-1)return[...C,{jobId:A,...T}];const k=[...C];return k[F]={...k[F],...T},k},N=C=>{switch(C){case"failed":return 0;case"processing":return 1;case"dispatched":return 2;case"completed":return 3;case"cancelled":return 4}},P=C=>{const A=C.detail||{},T=A.total??0,F=A.dispatched??0,k=A.processing??0,E=A.completed??0,$=A.failed??0,z=F+k>0,X=T>0&&E+$>=T&&!z,R=A.recent_event?.status;if(R==="completed"&&E>0){const ne=`first-complete:${E}:${$}`;if(p.current!==ne){p.current=ne;const re=T-E-$,J=re>0?e("backgroundDispatch.toast.printStartedRemaining",{completed:E,remaining:re}):$>0?e("backgroundDispatch.toast.completeWithFailures",{completed:E,failed:$}):e("backgroundDispatch.toast.completeSuccess",{completed:E});r(se=>{const K={id:m,message:J,type:$>0?"warning":"success",persistent:!0};return se.find(pe=>pe.id===m)?se.map(pe=>pe.id===m?K:pe):[...se,K]});const ue=u.current.get(m);ue&&clearTimeout(ue);const ie=setTimeout(()=>{f.current&&(r(se=>se.filter(K=>K.id!==m)),u.current.delete(m),p.current=null)},3e3);u.current.set(m,ie)}return}if(z){p.current=null,r(ne=>{const J=ne.find(B=>B.id===m)?.dispatchData?.jobs||[],ue=(A.dispatched_jobs||[]).map(B=>({jobId:B.job_id,sourceName:B.source_name||e("backgroundDispatch.unknownFile"),printerName:B.printer_name||e("backgroundDispatch.unknownPrinter"),status:"dispatched"})),se=(A.active_jobs&&A.active_jobs.length>0?A.active_jobs:A.active_job?.job_id?[A.active_job]:[]).filter(B=>typeof B.job_id=="number").map(B=>({jobId:B.job_id,sourceName:B.source_name||e("backgroundDispatch.unknownFile"),printerName:B.printer_name||e("backgroundDispatch.unknownPrinter"),status:"processing",message:B.message,uploadBytes:B.upload_bytes,uploadTotalBytes:B.upload_total_bytes,uploadProgressPct:B.upload_progress_pct})),K=new Set([...ue,...se].map(B=>B.jobId)),ae=J.filter(B=>!K.has(B.jobId)&&["completed","failed","cancelled"].includes(B.status));let pe=[...ue,...se,...ae];if(A.recent_event?.job_id&&A.recent_event?.status){const B=A.recent_event.status,Y=B==="cancelled"?"cancelled":B==="cancelling"?"processing":B,D=A.recent_event.source_name||e("backgroundDispatch.unknownFile"),M=A.recent_event.printer_name||e("backgroundDispatch.unknownPrinter");pe=S(pe,A.recent_event.job_id,{status:Y,sourceName:D,printerName:M,message:A.recent_event.message})}se.forEach(B=>{pe=S(pe,B.jobId,{status:"processing",sourceName:B.sourceName,printerName:B.printerName,message:B.message,uploadBytes:B.uploadBytes,uploadTotalBytes:B.uploadTotalBytes,uploadProgressPct:B.uploadProgressPct})});const be={total:T,dispatched:F,processing:k,completed:E,failed:$,jobs:[...pe].sort((B,Y)=>{const D=N(B.status)-N(Y.status);return D!==0?D:B.jobId-Y.jobId})};return ne.find(B=>B.id===m)?ne.map(B=>B.id===m?{...B,message:e("backgroundDispatch.startingPrints"),type:"loading",persistent:!0,dispatchData:be}:B):[...ne,{id:m,message:e("backgroundDispatch.startingPrints"),type:"loading",persistent:!0,dispatchData:be}]});return}if(X){const ne=`${E}:${$}`;if(p.current===ne)return;p.current=ne;const re=$>0?e("backgroundDispatch.toast.completeWithFailures",{completed:E,failed:$}):e("backgroundDispatch.toast.completeSuccess",{completed:E});r(ie=>{const se={id:m,message:re,type:$>0?"warning":"success",persistent:!0};return ie.find(ae=>ae.id===m)?ie.map(ae=>ae.id===m?se:ae):[...ie,se]});const J=u.current.get(m);J&&clearTimeout(J);const ue=setTimeout(()=>{r(ie=>ie.filter(se=>se.id!==m)),u.current.delete(m),p.current=null},3e3);u.current.set(m,ue);return}if(!z&&R&&["cancelled","failed","completed","idle"].includes(R)&&(r(ne=>ne.filter(re=>re.id!==m)),p.current=null),A.recent_event?.status==="idle"&&!z&&(r(ne=>ne.filter(re=>re.id!==m)),p.current=null),z||d(new Set),A.dispatched_jobs){const ne=new Set(A.dispatched_jobs.map(re=>re.job_id));d(re=>{const J=new Set;return re.forEach(ue=>{ne.has(ue)&&J.add(ue)}),J})}};return window.addEventListener("background-dispatch",P),()=>window.removeEventListener("background-dispatch",P)},[e]),a.jsxs(PJ.Provider,{value:{showToast:x,showPersistentToast:v,dismissToast:b,setViewportSuppressed:l},children:[t,a.jsx("div",{className:`fixed bottom-4 right-20 z-[60] flex flex-col items-end gap-2 ${o?"hidden":""}`,children:n.map(S=>a.jsx("div",{className:`rounded-lg border shadow-lg backdrop-blur-sm animate-slide-in ${eve[S.type]} ${S.dispatchData?"w-[420px] p-3":"flex items-center gap-3 px-4 py-3"}`,children:S.dispatchData?a.jsxs(a.Fragment,{children:[a.jsxs("div",{className:"flex items-start justify-between gap-3",children:[a.jsxs("div",{className:"flex items-start gap-2",children:[n6[S.type],a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm font-medium",children:e("backgroundDispatch.startingPrints")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-0.5",children:e("backgroundDispatch.progressSummary",{complete:S.dispatchData.completed+S.dispatchData.failed,total:S.dispatchData.total,dispatched:S.dispatchData.dispatched,processing:S.dispatchData.processing})})]})]}),a.jsxs("div",{className:"flex items-center gap-1",children:[a.jsx("button",{onClick:()=>s(N=>!N),className:"text-bambu-gray hover:text-white transition-colors","aria-label":e(i?"backgroundDispatch.expandDetails":"backgroundDispatch.collapseDetails"),children:i?a.jsx(lc,{className:"w-4 h-4"}):a.jsx(zn,{className:"w-4 h-4"})}),a.jsx("button",{onClick:()=>b(S.id),className:"text-bambu-gray hover:text-white transition-colors","aria-label":e("backgroundDispatch.dismissToast"),children:a.jsx(Bt,{className:"w-4 h-4"})})]})]}),!i&&a.jsx("div",{className:"mt-3 space-y-2 max-h-64 overflow-y-auto pr-1",children:S.dispatchData.jobs.map(N=>{const P={dispatched:15,processing:60,completed:100,failed:100,cancelled:100},C=N.status==="processing"&&typeof N.uploadProgressPct=="number"&&N.uploadProgressPct>=99.9,A={dispatched:"bg-bambu-gray/60",processing:"bg-bambu-green",completed:"bg-green-500",failed:"bg-red-500",cancelled:"bg-yellow-500"};return a.jsxs("div",{className:"rounded border border-white/10 bg-black/15 p-2",children:[a.jsxs("div",{className:"flex items-center justify-between gap-2",children:[a.jsx("span",{className:"text-xs text-white truncate",title:N.sourceName,children:N.sourceName}),a.jsxs("div",{className:"flex items-center gap-2",children:[(N.status==="dispatched"||N.status==="processing")&&a.jsx("button",{onClick:()=>{g(N.jobId)},disabled:c.has(N.jobId),className:"text-[11px] text-red-300 hover:text-red-200 disabled:opacity-50 disabled:cursor-not-allowed",title:e("backgroundDispatch.cancelDispatchJob"),children:c.has(N.jobId)?e("backgroundDispatch.cancelling"):e("backgroundDispatch.cancel")}),a.jsx("span",{className:"text-[11px] uppercase tracking-wide text-bambu-gray",children:e(`backgroundDispatch.status.${N.status}`)})]})]}),a.jsx("div",{className:"text-[11px] text-bambu-gray truncate",title:N.printerName,children:N.printerName}),N.message&&a.jsx("div",{className:"text-[11px] text-bambu-gray truncate",title:N.message,children:N.message}),N.status==="processing"&&(C?a.jsx("div",{className:"text-[11px] text-bambu-gray truncate",children:e("backgroundDispatch.awaitingPrinter")}):typeof N.uploadBytes=="number"&&typeof N.uploadTotalBytes=="number"&&N.uploadTotalBytes>0?a.jsxs("div",{className:"text-[11px] text-bambu-gray truncate",children:[Yi(N.uploadBytes)," / ",Yi(N.uploadTotalBytes),typeof N.uploadProgressPct=="number"?` (${N.uploadProgressPct.toFixed(1)}%)`:""]}):null),a.jsx("div",{className:"mt-1 h-1.5 w-full rounded bg-white/10 overflow-hidden",children:a.jsx("div",{className:`h-full ${A[N.status]} transition-all duration-300 ${C?"animate-pulse":""}`,style:{width:`${N.status==="processing"&&typeof N.uploadProgressPct=="number"?Math.max(0,Math.min(100,N.uploadProgressPct)):P[N.status]}%`}})})]},N.jobId)})})]}):a.jsxs(a.Fragment,{children:[n6[S.type],a.jsx("span",{className:"text-white text-sm",children:S.message}),a.jsx("button",{onClick:()=>b(S.id),className:"ml-2 text-bambu-gray hover:text-white transition-colors",children:a.jsx(Bt,{className:"w-4 h-4"})})]})},S.id))})]})}function nve(t="system"){const e=t==="system"?TJ():t;switch(e){case"us":return"MM/DD/YYYY";case"eu":return"DD/MM/YYYY";case"iso":return"YYYY-MM-DD";default:return e}}function rve(t="system"){switch(t){case"12h":return"HH:MM AM/PM";case"24h":return"HH:MM";default:{const n=new Date(2e3,0,1,14,30).toLocaleTimeString();return n.includes("PM")||n.includes("AM")?"HH:MM AM/PM":"HH:MM"}}}function TF(t,e="system"){const n=String(t.getDate()).padStart(2,"0"),r=String(t.getMonth()+1).padStart(2,"0"),i=t.getFullYear();switch(e){case"us":return`${r}/${n}/${i}`;case"eu":return`${n}/${r}/${i}`;case"iso":return`${i}-${r}-${n}`;default:return t.toLocaleDateString()}}function r6(t,e="system"){const n=t.getHours(),r=String(t.getMinutes()).padStart(2,"0");switch(e){case"12h":{const i=n%12||12,s=n<12?"AM":"PM";return`${i}:${r} ${s}`}case"24h":return`${String(n).padStart(2,"0")}:${r}`;default:return t.toLocaleTimeString([],{hour:"2-digit",minute:"2-digit"})}}function ave(t){for(const e of["/",".","-"]){const n=t.split(e);if(n.length===3)return n}return null}function TJ(){const t=new Date(2e3,11,31).toLocaleDateString();return t.startsWith("12")?"us":t.startsWith("31")?"eu":"iso"}function ive(t,e="system"){if(!t)return null;const n=ave(t);if(!n)return null;const r=e==="system"?TJ():e;let i,s,o;switch(r){case"us":s=parseInt(n[0],10),i=parseInt(n[1],10),o=parseInt(n[2],10);break;case"eu":i=parseInt(n[0],10),s=parseInt(n[1],10),o=parseInt(n[2],10);break;case"iso":o=parseInt(n[0],10),s=parseInt(n[1],10),i=parseInt(n[2],10);break}return isNaN(i)||isNaN(s)||isNaN(o)||s<1||s>12||i<1||i>31||o<1900||o>2100?null:new Date(o,s-1,i)}function sve(t){if(!t)return null;const n=t.trim().match(/^(\d{1,2}):(\d{2})\s*(AM|PM)?$/i);if(!n)return null;let r=parseInt(n[1],10);const i=parseInt(n[2],10),s=n[3]?.toUpperCase();return s==="PM"&&r<12&&(r+=12),s==="AM"&&r===12&&(r=0),r<0||r>23||i<0||i>59?null:{hours:r,minutes:i}}function AF(t){const e=t.getFullYear(),n=String(t.getMonth()+1).padStart(2,"0"),r=String(t.getDate()).padStart(2,"0"),i=String(t.getHours()).padStart(2,"0"),s=String(t.getMinutes()).padStart(2,"0");return`${e}-${n}-${r}T${i}:${s}`}function mw(t,e="system"){return e==="12h"?t.hour12=!0:e==="24h"&&(t.hour12=!1),t}function Kn(t){return t?t.endsWith("Z")||/[+-]\d{2}:\d{2}$/.test(t)?new Date(t):new Date(t+"Z"):null}function yg(t,e){const n=Kn(t);if(!n)return"";const r={year:"numeric",month:"short",day:"numeric"};return n.toLocaleDateString(void 0,e??r)}function vg(t,e="system",n){const r=Kn(t);if(!r)return"";const s=mw(n??{year:"numeric",month:"short",day:"numeric",hour:"2-digit",minute:"2-digit"},e);return r.toLocaleString(void 0,s)}function AJ(t,e="system",n){const i=mw({...{hour:"2-digit",minute:"2-digit"},...n},e);return t.toLocaleTimeString([],i)}function oO(t,e="system",n){const r=new Date,i=new Date(r.getTime()+t*60*1e3),s=new Date(r);s.setHours(0,0,0,0);const o=new Date(i);o.setHours(0,0,0,0);const l=mw({hour:"2-digit",minute:"2-digit"},e),c=i.toLocaleTimeString([],l),d=Math.floor((o.getTime()-s.getTime())/864e5);return d===0?c:d===1?`${n?.("common.tomorrow")??"Tomorrow"} ${c}`:`${i.toLocaleDateString([],{weekday:"short"})} ${c}`}function Qi(t){if(t==null||t<0)return"--";const e=Math.floor(t/3600),n=Math.floor(t%3600/60);return e>0?`${e}h ${n}m`:`${n}m`}function dp(t,e="system",n){if(!t)return n?.("time.unknown")??"-";const r=Kn(t);if(!r)return n?.("time.unknown")??"-";const i=new Date,s=r.getTime()-i.getTime(),o=s<0,l=Math.abs(s),c=Math.floor(l/6e4),d=Math.floor(l/36e5),u=Math.floor(l/864e5);return c<1?o?n?.("time.justNow")??"Just now":n?.("time.now")??"Now":d<1?o?n?.("time.minsAgo",{count:c})??`${c}m ago`:n?.("time.inMins",{count:c})??`in ${c}m`:u<1?o?n?.("time.hoursAgo",{count:d})??`${d}h ago`:n?.("time.inHours",{count:d})??`in ${d}h`:u<7?o?n?.("time.daysAgo",{count:u})??`${u}d ago`:n?.("time.inDays",{count:u})??`in ${u}d`:vg(t,e)}function Eh(t){const e=Math.floor(t/60),n=Math.floor(t%60);return`${e}:${n.toString().padStart(2,"0")}`}function ove(t){if(t<1)return`${Math.round(t*60)}m`;const e=Math.floor(t),n=Math.round((t-e)*60);return n>0?`${e}h ${n}m`:`${e}h`}const UM=1920,lve=.7,cve=300;function dve(t){return new Promise((e,n)=>{const r=new Image;r.onload=()=>{let{width:i,height:s}=r;if(i>UM||s>UM){const d=UM/Math.max(i,s);i=Math.round(i*d),s=Math.round(s*d)}const o=document.createElement("canvas");o.width=i,o.height=s;const l=o.getContext("2d");if(!l){n(new Error("No canvas context"));return}l.drawImage(r,0,0,i,s);const c=o.toDataURL("image/jpeg",lve);e(c.replace(/^data:[^;]+;base64,/,""))},r.onerror=n,r.src=URL.createObjectURL(t)})}function uve(t){const e=Math.floor(t/60),n=t%60;return`${e.toString().padStart(2,"0")}:${n.toString().padStart(2,"0")}`}function mve(){const{t}=_t(),[e,n]=w.useState(!1),[r,i]=w.useState("form"),[s,o]=w.useState(""),[l,c]=w.useState(""),[d,u]=w.useState(null),[m,p]=w.useState(!1),[f,x]=w.useState(null),[v,b]=w.useState(null),[g,S]=w.useState(""),[N,P]=w.useState(0),[C,A]=w.useState(!1),T=w.useRef(null),F=w.useRef(null),k=w.useRef(()=>{});w.useEffect(()=>{if(r!=="logging")return;if(N>=cve){k.current();return}const se=setTimeout(()=>P(K=>K+1),1e3);return()=>clearTimeout(se)},[r,N]);const E=()=>{n(!0),i("form"),o(""),c(""),u(null),x(null),b(null),S(""),P(0),A(!1)},$=()=>{n(!1)},z=w.useCallback(async se=>{if(se.type.startsWith("image/"))try{const K=await dve(se);u(K)}catch{}},[]),X=w.useCallback(se=>{const K=se.clipboardData?.items;if(K){for(const ae of K)if(ae.type.startsWith("image/")){const pe=ae.getAsFile();pe&&z(pe);break}}},[z]),R=w.useCallback(se=>{se.preventDefault(),p(!0)},[]),ne=w.useCallback(se=>{se.preventDefault(),p(!1)},[]),re=w.useCallback(se=>{se.preventDefault(),p(!1);const K=se.dataTransfer.files?.[0];K&&z(K)},[z]),J=async()=>{if(s.trim())try{const se=await zM.startLogging();A(se.was_debug),P(0),i("logging")}catch(se){S(se instanceof Error?se.message:t("bugReport.unexpectedError")),i("error")}},ue=async()=>{i("stopping");try{const se=await zM.stopLogging(C);await ie(se.logs)}catch(se){S(se instanceof Error?se.message:t("bugReport.unexpectedError")),i("error")}};k.current=ue;const ie=async se=>{i("submitting");try{const K=await zM.submit({description:s.trim(),email:l.trim()||void 0,screenshot_base64:d||void 0,include_support_info:!0,debug_logs:se||void 0});K.success?(x(K.issue_url||null),b(K.issue_number||null),i("success")):(S(K.message),i("error"))}catch(K){S(K instanceof Error?K.message:t("bugReport.unexpectedError")),i("error")}};return a.jsxs(a.Fragment,{children:[a.jsx("button",{onClick:E,className:"fixed bottom-4 right-4 z-40 w-12 h-12 rounded-full bg-red-500 hover:bg-red-600 text-white shadow-lg hover:shadow-xl transition-all duration-200 hover:scale-110 flex items-center justify-center",title:t("bugReport.title"),children:a.jsx(Yx,{className:"w-5 h-5"})}),e&&a.jsx("div",{id:"bug-report-modal",className:"fixed bottom-20 right-4 z-50 w-full max-w-md",onPaste:X,children:a.jsxs("div",{ref:T,className:"bg-white dark:bg-gray-800 rounded-lg shadow-2xl border border-gray-200 dark:border-gray-700 max-h-[80vh] overflow-y-auto",children:[a.jsxs("div",{className:"flex items-center justify-between p-4 border-b border-gray-200 dark:border-gray-700 sticky top-0 bg-white dark:bg-gray-800 z-10",children:[a.jsxs("h2",{className:"text-lg font-semibold text-gray-900 dark:text-white flex items-center gap-2",children:[a.jsx(Yx,{className:"w-5 h-5 text-red-500"}),t("bugReport.title")]}),a.jsx("button",{onClick:$,className:"text-gray-400 hover:text-gray-600 dark:hover:text-gray-300",children:a.jsx(Bt,{className:"w-5 h-5"})})]}),a.jsxs("div",{className:"p-4 space-y-4",children:[r==="form"&&a.jsxs(a.Fragment,{children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm font-medium text-gray-700 dark:text-gray-300 mb-1",children:[t("bugReport.description")," *"]}),a.jsx("textarea",{value:s,onChange:se=>o(se.target.value),placeholder:t("bugReport.descriptionPlaceholder"),rows:3,className:"w-full px-3 py-2 border border-gray-300 dark:border-gray-600 rounded-lg bg-white dark:bg-gray-700 text-gray-900 dark:text-white placeholder-gray-400 focus:ring-2 focus:ring-blue-500 focus:border-transparent resize-vertical"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-gray-700 dark:text-gray-300 mb-1",children:t("bugReport.email")}),a.jsx("input",{type:"email",value:l,onChange:se=>c(se.target.value),placeholder:t("bugReport.emailPlaceholder"),className:"w-full px-3 py-2 border border-gray-300 dark:border-gray-600 rounded-lg bg-white dark:bg-gray-700 text-gray-900 dark:text-white placeholder-gray-400 focus:ring-2 focus:ring-blue-500 focus:border-transparent"}),a.jsx("p",{className:"mt-1 text-xs text-gray-500 dark:text-gray-400",children:t("bugReport.emailPrivacy")})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-gray-700 dark:text-gray-300 mb-1",children:t("bugReport.screenshot")}),d?a.jsxs("div",{className:"relative",children:[a.jsx("img",{src:`data:image/jpeg;base64,${d}`,alt:t("bugReport.screenshot"),className:"w-full max-h-40 object-contain rounded-lg border border-gray-200 dark:border-gray-600"}),a.jsx("button",{onClick:()=>u(null),className:"absolute top-2 right-2 p-1 bg-red-500 hover:bg-red-600 text-white rounded-full shadow",title:t("common.delete"),children:a.jsx(Zt,{className:"w-3 h-3"})})]}):a.jsxs("button",{type:"button",onClick:()=>F.current?.click(),onDragOver:R,onDragLeave:ne,onDrop:re,className:`w-full flex flex-col items-center gap-2 px-4 py-4 border-2 border-dashed rounded-lg transition-colors cursor-pointer ${m?"border-blue-500 bg-blue-50 dark:bg-blue-900/20 text-blue-500":"border-gray-300 dark:border-gray-600 text-gray-500 dark:text-gray-400 hover:border-gray-400 dark:hover:border-gray-500 hover:text-gray-600 dark:hover:text-gray-300"}`,children:[a.jsx(_a,{className:"w-5 h-5"}),a.jsx("span",{className:"text-sm",children:t("bugReport.uploadOrPaste")})]}),a.jsx("input",{ref:F,type:"file",accept:"image/*",className:"hidden",onChange:se=>{const K=se.target.files?.[0];K&&z(K),se.target.value=""}})]}),a.jsxs("details",{className:"text-xs bg-amber-50 dark:bg-amber-900/20 border border-amber-200 dark:border-amber-800 rounded-lg p-3",children:[a.jsx("summary",{className:"cursor-pointer font-medium text-amber-700 dark:text-amber-300 hover:text-amber-800 dark:hover:text-amber-200",children:t("bugReport.dataCollectedSummary")}),a.jsxs("div",{className:"mt-2 space-y-2 pl-2 border-l-2 border-amber-300 dark:border-amber-700 text-amber-800 dark:text-amber-200",children:[a.jsx("p",{className:"font-medium",children:t("bugReport.dataIncluded")}),a.jsx("p",{children:t("bugReport.dataIncludedList")}),a.jsx("p",{className:"font-medium",children:t("bugReport.dataNeverIncluded")}),a.jsx("p",{children:t("bugReport.dataNeverIncludedList")})]})]}),a.jsxs("div",{className:"flex justify-end gap-2 pt-2",children:[a.jsx("button",{onClick:$,className:"px-4 py-2 text-sm font-medium text-gray-700 dark:text-gray-300 bg-gray-100 dark:bg-gray-700 hover:bg-gray-200 dark:hover:bg-gray-600 rounded-lg transition-colors",children:t("common.cancel")}),a.jsx("button",{onClick:J,disabled:!s.trim(),className:"px-4 py-2 text-sm font-medium text-white bg-red-500 hover:bg-red-600 disabled:opacity-50 disabled:cursor-not-allowed rounded-lg transition-colors",children:t("bugReport.startLogging")})]})]}),r==="logging"&&a.jsxs("div",{className:"py-6 space-y-6",children:[a.jsxs("div",{className:"space-y-3 px-2",children:[a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsx(Bc,{className:"w-5 h-5 text-green-500 flex-shrink-0"}),a.jsx("span",{className:"text-sm text-green-700 dark:text-green-400",children:t("bugReport.stepEnableLogging")})]}),a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsxs("span",{className:"relative flex h-5 w-5 flex-shrink-0 items-center justify-center",children:[a.jsx("span",{className:"animate-ping absolute inline-flex h-full w-full rounded-full bg-blue-400 opacity-75"}),a.jsx("span",{className:"relative inline-flex rounded-full h-3 w-3 bg-blue-500"})]}),a.jsx("span",{className:"text-sm font-medium text-blue-700 dark:text-blue-300",children:t("bugReport.stepReproduce")})]}),a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsx(cw,{className:"w-5 h-5 text-gray-300 dark:text-gray-600 flex-shrink-0"}),a.jsx("span",{className:"text-sm text-gray-400 dark:text-gray-500",children:t("bugReport.stepStopLogging")})]})]}),a.jsxs("div",{className:"text-center",children:[a.jsx("p",{className:"text-3xl font-mono text-blue-500",children:uve(N)}),a.jsx("p",{className:"text-xs text-gray-500 dark:text-gray-400 mt-1",children:t("bugReport.maxDuration",{minutes:5})})]}),a.jsx("div",{className:"flex justify-center",children:a.jsx("button",{onClick:ue,className:"px-6 py-2.5 text-sm font-medium text-white bg-red-500 hover:bg-red-600 rounded-lg transition-colors",children:t("bugReport.stopAndSubmit")})})]}),(r==="stopping"||r==="submitting")&&a.jsxs("div",{className:"flex flex-col items-center justify-center py-8 gap-3",children:[a.jsx(mt,{className:"w-8 h-8 animate-spin text-blue-500"}),a.jsx("p",{className:"text-sm text-gray-600 dark:text-gray-400",children:t(r==="stopping"?"bugReport.stoppingLogs":"bugReport.submitting")})]}),r==="success"&&a.jsxs("div",{className:"flex flex-col items-center justify-center py-8 gap-3",children:[a.jsx(wr,{className:"w-12 h-12 text-green-500"}),a.jsx("p",{className:"text-lg font-semibold text-gray-900 dark:text-white",children:t("bugReport.thankYou")}),a.jsx("p",{className:"text-sm text-gray-600 dark:text-gray-400",children:t("bugReport.submitted")}),f&&a.jsxs("a",{href:f,target:"_blank",rel:"noopener noreferrer",className:"text-sm text-blue-500 hover:text-blue-600 underline",children:[t("bugReport.viewIssue")," #",v]}),a.jsx("button",{onClick:$,className:"mt-4 px-4 py-2 text-sm font-medium text-gray-700 dark:text-gray-300 bg-gray-100 dark:bg-gray-700 hover:bg-gray-200 dark:hover:bg-gray-600 rounded-lg transition-colors",children:t("common.close")})]}),r==="error"&&a.jsxs("div",{className:"flex flex-col items-center justify-center py-8 gap-3",children:[a.jsx(Oa,{className:"w-12 h-12 text-red-500"}),a.jsx("p",{className:"text-lg font-semibold text-gray-900 dark:text-white",children:t("bugReport.submitFailed")}),a.jsx("p",{className:"text-sm text-gray-600 dark:text-gray-400 text-center",children:g}),a.jsxs("div",{className:"flex gap-2 mt-4",children:[a.jsx("button",{onClick:()=>i("form"),className:"px-4 py-2 text-sm font-medium text-white bg-red-500 hover:bg-red-600 rounded-lg transition-colors",children:t("bugReport.submit")}),a.jsx("button",{onClick:$,className:"px-4 py-2 text-sm font-medium text-gray-700 dark:text-gray-300 bg-gray-100 dark:bg-gray-700 hover:bg-gray-200 dark:hover:bg-gray-600 rounded-lg transition-colors",children:t("common.close")})]})]})]})]})})]})}const Zu=[{id:"printers",to:"/",icon:Mr,labelKey:"nav.printers"},{id:"archives",to:"/archives",icon:lo,labelKey:"nav.archives"},{id:"queue",to:"/queue",icon:da,labelKey:"nav.queue"},{id:"stats",to:"/stats",icon:_fe,labelKey:"nav.stats"},{id:"profiles",to:"/profiles",icon:qg,labelKey:"nav.profiles"},{id:"maintenance",to:"/maintenance",icon:xg,labelKey:"nav.maintenance"},{id:"projects",to:"/projects",icon:$s,labelKey:"nav.projects"},{id:"inventory",to:"/inventory",icon:mge,labelKey:"nav.inventory"},{id:"files",to:"/files",icon:fl,labelKey:"nav.files"},{id:"makerworld",to:"/makerworld",icon:qs,labelKey:"nav.makerworld"},{id:"notifications",to:"/notifications",icon:ap,labelKey:"nav.notifications"},{id:"settings",to:"/settings",icon:mS,labelKey:"nav.settings"}];function hve(){const t=localStorage.getItem("sidebarOrder");if(t)try{return JSON.parse(t)}catch{return Zu.map(e=>e.id)}return Zu.map(e=>e.id)}function a6(t){localStorage.setItem("sidebarOrder",JSON.stringify(t))}function r1(t){return t.startsWith("ext-")}function jJ(){return localStorage.getItem("defaultView")||"/"}function pve(t){localStorage.setItem("defaultView",t)}function fve(){const t=as(),e=Qc(),{mode:n,toggleMode:r}=Gg(),{t:i}=_t(),s=Yye();NJ();const{user:o,authEnabled:l,logout:c,hasPermission:d}=gr(),{showToast:u}=rn(),[m,p]=w.useState(!1),[f,x]=w.useState({currentPassword:"",newPassword:"",confirmPassword:""}),[v,b]=w.useState(!1),[g,S]=w.useState(()=>localStorage.getItem("sidebarExpanded")!=="false"),[N,P]=w.useState(!1),[C,A]=w.useState(!1),[T,F]=w.useState(!1),[k,E]=w.useState(hve),[$,z]=w.useState(null),[X,R]=w.useState(null),ne=w.useRef(!1),[re,J]=w.useState(()=>sessionStorage.getItem("dismissedUpdateVersion")),[ue,ie]=w.useState(null),{data:se}=Qe({queryKey:["version"],queryFn:oe.getVersion,staleTime:1/0}),{data:K}=Qe({queryKey:["settings"],queryFn:oe.getSettings,staleTime:300*1e3}),{data:ae}=Qe({queryKey:["default-sidebar-order"],queryFn:oe.getDefaultSidebarOrder,staleTime:300*1e3});w.useEffect(()=>{const xe=ae?.default_sidebar_order;if(!xe||l&&!o)return;const Fe=o?`sidebarDefaultApplied_${o.id}`:"sidebarDefaultApplied";if(!localStorage.getItem(Fe))try{const Be=JSON.parse(xe),Ce=Array.isArray(Be)?Be:Be.order;if(!Array.isArray(Ce)||Ce.length===0)return;const ze=new Set(Zu.map(Oe=>Oe.id)),Me=Ce.filter(Oe=>typeof Oe=="string"&&(ze.has(Oe)||r1(Oe)));Me.length>0&&(E(Me),a6(Me),localStorage.setItem(Fe,"1"))}catch(Be){console.error("Failed to apply default sidebar order:",Be)}},[ae?.default_sidebar_order,E,o,l]);const{data:pe}=Qe({queryKey:["advancedAuthStatus"],queryFn:oe.getAdvancedAuthStatus,staleTime:300*1e3,enabled:l}),{data:be}=Qe({queryKey:["updateCheck"],queryFn:oe.checkForUpdates,enabled:K?.check_updates!==!1,staleTime:3600*1e3,refetchInterval:3600*1e3}),{data:fe}=Qe({queryKey:["external-links"],queryFn:oe.getExternalLinks}),{data:B}=Qe({queryKey:["smart-plugs"],queryFn:oe.getSmartPlugs,staleTime:30*1e3}),Y=B?.some(xe=>xe.show_in_switchbar)??!1,{data:D}=Qe({queryKey:["debugLogging"],queryFn:Lx.getDebugLoggingState,staleTime:60*1e3,refetchInterval:60*1e3}),{data:M}=Qe({queryKey:["developer-mode-warnings"],queryFn:oe.getDeveloperModeWarnings,staleTime:10*1e3,refetchInterval:30*1e3,refetchOnWindowFocus:!0}),{data:U}=Qe({queryKey:["queue","pending"],queryFn:()=>oe.getQueue(void 0,"pending"),staleTime:5*1e3,refetchInterval:5*1e3,refetchOnWindowFocus:!0}),Q=U?.length??0,{data:O}=Qe({queryKey:["pending-uploads","count"],queryFn:vx.getCount,staleTime:5*1e3,refetchInterval:5*1e3,refetchOnWindowFocus:!0}),ce=O?.count??0,I=w.useMemo(()=>{const xe=new Set;return U?.forEach(Fe=>{Fe.printer_id&&xe.add(Fe.printer_id)}),Array.from(xe)},[U]),q=Dp({queries:I.map(xe=>({queryKey:["printerStatus",xe],queryFn:()=>oe.getPrinterStatus(xe),staleTime:30*1e3}))}).some(xe=>{const Fe=xe.data;return Fe?!!Fe.awaiting_plate_clear:!1}),[W,te]=w.useState(null);w.useEffect(()=>{if(!D?.enabled||!D.enabled_at){te(null);return}const xe=Kn(D.enabled_at)?.getTime()??Date.now(),Fe=()=>{te(Math.floor((Date.now()-xe)/1e3))};Fe();const Be=setInterval(Fe,1e3);return()=>clearInterval(Be)},[D?.enabled,D?.enabled_at]);const le=w.useMemo(()=>new Map(Zu.map(xe=>[xe.id,xe])),[]),ye=w.useMemo(()=>new Map((fe||[]).map(xe=>[`ext-${xe.id}`,xe])),[fe]),he=(()=>{const xe=[],Fe=new Set,Be={archives:"archives:read",queue:"queue:read",stats:"stats:read",profiles:"kprofiles:read",maintenance:"maintenance:read",projects:"projects:read",inventory:"inventory:read",files:"library:read",settings:"settings:read",notifications:"notifications:user_email"},Ce=ze=>!!(l&&ze in Be&&!d(Be[ze])||ze==="notifications"&&(!l||!pe?.advanced_auth_enabled||K?.user_notifications_enabled===!1));for(const ze of k)Ce(ze)||(le.has(ze)||ye.has(ze))&&(xe.push(ze),Fe.add(ze));for(const ze of Zu)Ce(ze.id)||Fe.has(ze.id)||(xe.push(ze.id),Fe.add(ze.id));for(const ze of fe||[]){const Me=`ext-${ze.id}`;Fe.has(Me)||(xe.push(Me),Fe.add(Me))}return xe})(),me=(xe,Fe)=>{z(Fe),xe.dataTransfer.effectAllowed="move",xe.dataTransfer.setData("text/plain",Fe)},H=(xe,Fe)=>{xe.preventDefault(),xe.dataTransfer.dropEffect="move",R(Fe)},L=()=>{R(null)},ee=(xe,Fe)=>{if(xe.preventDefault(),$===null||$===Fe){z(null),R(null);return}const Be=[...he],Ce=Be.indexOf($),ze=Be.indexOf(Fe);if(Ce===-1||ze===-1){z(null),R(null);return}Be.splice(Ce,1),Be.splice(ze,0,$),E(Be),a6(Be),z(null),R(null)},ge=()=>{z(null),R(null)},ke=be?.update_available&&be.latest_version&&be.latest_version!==re&&!be.is_ha_addon,je=()=>{be?.latest_version&&(sessionStorage.setItem("dismissedUpdateVersion",be.latest_version),J(be.latest_version))};w.useEffect(()=>{if(!ne.current&&e.pathname==="/"){const xe=jJ();xe!=="/"&&(ne.current=!0,t(xe,{replace:!0}))}},[e.pathname,t]),w.useEffect(()=>{localStorage.setItem("sidebarExpanded",String(g))},[g]),w.useEffect(()=>{s&&P(!1)},[e.pathname,s]),w.useEffect(()=>{const xe=Fe=>{if(!d("printers:control"))return;const Be=Fe.detail;ie({printer_id:Be.printer_id,printer_name:Be.printer_name,message:Be.message})};return window.addEventListener("plate-not-empty",xe),()=>window.removeEventListener("plate-not-empty",xe)},[d]);const Te=w.useCallback(xe=>{const Fe=xe.target;if(!(Fe.tagName==="INPUT"||Fe.tagName==="TEXTAREA"||Fe.isContentEditable)&&!xe.metaKey&&!xe.ctrlKey&&!xe.altKey){const Be=parseInt(xe.key);if(Be>=1&&Be<=he.length&&Be<=9){const Ce=he[Be-1];if(xe.preventDefault(),r1(Ce)){const ze=ye.get(Ce);if(ze?.open_in_new_tab)window.open(ze.url,"_blank","noopener,noreferrer");else{const Me=Ce.replace("ext-","");t(`/external/${Me}`)}}else{const ze=le.get(Ce);ze&&t(ze.to)}return}switch(xe.key){case"?":xe.preventDefault(),A(!0);break;case"Escape":A(!1);break}}},[t,he,le,ye]);return w.useEffect(()=>(document.addEventListener("keydown",Te),()=>document.removeEventListener("keydown",Te)),[Te]),a.jsxs("div",{className:"flex min-h-screen",children:[s&&a.jsxs("header",{className:"fixed top-0 left-0 right-0 z-40 h-14 bg-bambu-dark-secondary border-b border-bambu-dark-tertiary flex items-center px-4",children:[a.jsx("button",{onClick:()=>P(!0),className:"p-2 -ml-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors","aria-label":"Open menu",children:a.jsx(Kbe,{className:"w-6 h-6 text-white"})}),a.jsx("img",{src:n==="dark"?"/img/bambuddy_logo_dark_transparent.png":"/img/bambuddy_logo_light.png",alt:"Bambuddy",className:"h-8 ml-3"})]}),s&&N&&a.jsx("div",{className:"fixed inset-0 bg-black/60 z-40 transition-opacity",onClick:()=>P(!1)}),a.jsxs("aside",{className:`bg-bambu-dark-secondary border-r border-bambu-dark-tertiary flex flex-col transition-all duration-300 ${s?`fixed inset-y-0 left-0 z-50 w-72 transform ${N?"translate-x-0":"-translate-x-full"}`:`fixed inset-y-0 left-0 z-30 ${g?"w-64":"w-16"}`}`,children:[a.jsx("div",{className:`border-b border-bambu-dark-tertiary flex items-center justify-center ${s||g?"p-4":"p-2"}`,children:a.jsx("img",{src:n==="dark"?"/img/bambuddy_logo_dark_transparent.png":"/img/bambuddy_logo_light.png",alt:"Bambuddy",className:s||g?"h-16 w-auto":"h-8 w-8 object-cover object-left"})}),a.jsx("nav",{className:"flex-1 p-2 overflow-y-auto",children:a.jsx("ul",{className:"space-y-2",children:he.map(xe=>{if(r1(xe)){const Be=ye.get(xe);if(!Be)return null;const Ce=Be.custom_icon?null:nT(Be.icon);return a.jsx("li",{draggable:!0,onDragStart:ze=>me(ze,xe),onDragOver:ze=>H(ze,xe),onDragLeave:L,onDrop:ze=>ee(ze,xe),onDragEnd:ge,className:`relative ${$===xe?"opacity-50":""} ${X===xe&&$!==xe?"before:absolute before:left-0 before:right-0 before:top-0 before:h-0.5 before:bg-bambu-green":""}`,children:Be.open_in_new_tab?a.jsxs("a",{href:Be.url,target:"_blank",rel:"noopener noreferrer",className:`flex items-center ${s||g?"gap-3 px-4":"justify-center px-2"} py-3 rounded-lg transition-colors group text-bambu-gray-light hover:bg-bambu-dark-tertiary hover:text-white`,title:!s&&!g?Be.name:void 0,children:[g&&!s&&a.jsx(lp,{className:"w-4 h-4 flex-shrink-0 opacity-0 group-hover:opacity-50 cursor-grab active:cursor-grabbing -ml-1"}),Be.custom_icon?a.jsx("img",{src:oe.getExternalLinkIconUrl(Be.id),alt:"",className:"w-5 h-5 flex-shrink-0"}):Ce&&a.jsx(Ce,{className:"w-5 h-5 flex-shrink-0"}),(s||g)&&a.jsx("span",{children:Be.name})]}):a.jsxs(Px,{to:`/external/${Be.id}`,className:({isActive:ze})=>`flex items-center ${s||g?"gap-3 px-4":"justify-center px-2"} py-3 rounded-lg transition-colors group ${ze?"bg-bambu-green text-white":"text-bambu-gray-light hover:bg-bambu-dark-tertiary hover:text-white"}`,title:!s&&!g?Be.name:void 0,children:[g&&!s&&a.jsx(lp,{className:"w-4 h-4 flex-shrink-0 opacity-0 group-hover:opacity-50 cursor-grab active:cursor-grabbing -ml-1"}),Be.custom_icon?a.jsx("img",{src:oe.getExternalLinkIconUrl(Be.id),alt:"",className:"w-5 h-5 flex-shrink-0"}):Ce&&a.jsx(Ce,{className:"w-5 h-5 flex-shrink-0"}),(s||g)&&a.jsx("span",{children:Be.name})]})},xe)}else{const Be=le.get(xe);if(!Be)return null;const{to:Ce,icon:ze,labelKey:Me}=Be,Oe=xe==="queue"&&Q>0,Ge=xe==="archives"&&ce>0,et=Oe?Q:Ge?ce:0,ve=Oe||Ge,Xe=xe==="printers"&&q;return a.jsx("li",{draggable:!0,onDragStart:Pe=>me(Pe,xe),onDragOver:Pe=>H(Pe,xe),onDragLeave:L,onDrop:Pe=>ee(Pe,xe),onDragEnd:ge,className:`relative ${$===xe?"opacity-50":""} ${X===xe&&$!==xe?"before:absolute before:left-0 before:right-0 before:top-0 before:h-0.5 before:bg-bambu-green":""}`,children:a.jsxs(Px,{to:Ce,className:({isActive:Pe})=>`flex items-center ${s||g?"gap-3 px-4":"justify-center px-2"} py-3 rounded-lg transition-colors group ${Pe?"bg-bambu-green text-white":"text-bambu-gray-light hover:bg-bambu-dark-tertiary hover:text-white"}`,title:!s&&!g?i(Me):void 0,children:[g&&!s&&a.jsx(lp,{className:"w-4 h-4 flex-shrink-0 opacity-0 group-hover:opacity-50 cursor-grab active:cursor-grabbing -ml-1"}),a.jsxs("div",{className:"relative",children:[a.jsx(ze,{className:"w-5 h-5 flex-shrink-0"}),Xe&&a.jsx("span",{className:"absolute -top-0.5 -right-0.5 w-2.5 h-2.5 bg-yellow-500 rounded-full border-2 border-bambu-dark-secondary"}),ve&&a.jsx("span",{className:`absolute -top-1.5 -right-1.5 min-w-[18px] h-[18px] px-1 flex items-center justify-center text-[10px] font-bold rounded-full ${Ge?"bg-blue-500 text-white":"bg-yellow-500 text-black"}`,children:et>99?"99+":et})]}),(s||g)&&a.jsx("span",{children:i(Me)})]})},xe)}})})}),!s&&a.jsx("button",{onClick:()=>S(!g),className:"p-2 mx-2 mb-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white flex items-center justify-center",title:i(g?"nav.collapseSidebar":"nav.expandSidebar"),children:g?a.jsx(Uo,{className:"w-5 h-5"}):a.jsx(za,{className:"w-5 h-5"})}),a.jsx("div",{className:"flex-shrink-0 p-2 border-t border-bambu-dark-tertiary",children:s||g?a.jsxs("div",{className:"flex flex-col gap-2 px-2",children:[a.jsxs("div",{className:"flex items-center justify-center gap-1 flex-wrap",children:[Y&&a.jsxs("div",{className:"relative",children:[a.jsx("button",{onMouseEnter:()=>F(!0),className:`p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors ${T?"text-bambu-green":"text-bambu-gray-light hover:text-white"}`,title:i("nav.smartSwitches",{defaultValue:"Smart Switches"}),children:a.jsx(tc,{className:"w-5 h-5"})}),T&&a.jsx(JH,{onClose:()=>F(!1)})]}),d("system:read")?a.jsx(Px,{to:"/system",className:({isActive:xe})=>`p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors ${xe?"text-bambu-green":"text-bambu-gray-light hover:text-white"}`,title:i("nav.system"),children:a.jsx(Cs,{className:"w-5 h-5"})}):a.jsx("span",{className:"p-2 rounded-lg text-bambu-gray/50 cursor-not-allowed",title:"You do not have permission to view system information",children:a.jsx(Cs,{className:"w-5 h-5"})}),a.jsx("a",{href:"https://github.com/maziggy/bambuddy",target:"_blank",rel:"noopener noreferrer",className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("nav.viewOnGithub"),children:a.jsx(xF,{className:"w-5 h-5"})}),a.jsx("button",{onClick:()=>A(!0),className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("nav.keyboardShortcuts"),children:a.jsx(yF,{className:"w-5 h-5"})}),a.jsx("button",{onClick:r,className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i(n==="dark"?"nav.switchToLight":"nav.switchToDark"),children:n==="dark"?a.jsx(XH,{className:"w-5 h-5"}):a.jsx(EN,{className:"w-5 h-5"})}),l&&o&&a.jsxs(a.Fragment,{children:[a.jsx("button",{onClick:()=>p(!0),className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("changePassword.title"),children:a.jsx(ao,{className:"w-5 h-5"})}),a.jsx("button",{onClick:c,className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("nav.logout",{defaultValue:"Logout"}),children:a.jsx(wF,{className:"w-5 h-5"})})]})]}),a.jsxs("div",{className:"flex items-center justify-center gap-2",children:[a.jsxs("span",{className:"text-sm text-bambu-gray",children:["v",se?.version||"..."]}),be?.update_available&&a.jsxs("button",{onClick:()=>t("/settings"),className:"flex items-center gap-1 text-xs text-bambu-green hover:text-bambu-green/80 transition-colors",title:i("nav.updateAvailable",{version:be.latest_version}),children:[a.jsx(IM,{className:"w-4 h-4"}),a.jsx("span",{children:i("nav.update")})]})]})]}):a.jsxs("div",{className:"flex flex-col items-center gap-1 overflow-y-auto max-h-[50vh]",children:[be?.update_available&&a.jsx("button",{onClick:()=>t("/settings"),className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-green hover:text-bambu-green/80",title:i("nav.updateAvailable",{version:be.latest_version}),children:a.jsx(IM,{className:"w-5 h-5"})}),Y&&a.jsxs("div",{className:"relative",children:[a.jsx("button",{onMouseEnter:()=>F(!0),className:`p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors ${T?"text-bambu-green":"text-bambu-gray-light hover:text-white"}`,title:i("nav.smartSwitches",{defaultValue:"Smart Switches"}),children:a.jsx(tc,{className:"w-5 h-5"})}),T&&a.jsx(JH,{onClose:()=>F(!1)})]}),d("system:read")?a.jsx(Px,{to:"/system",className:({isActive:xe})=>`p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors ${xe?"text-bambu-green":"text-bambu-gray-light hover:text-white"}`,title:i("nav.system"),children:a.jsx(Cs,{className:"w-5 h-5"})}):a.jsx("span",{className:"p-2 rounded-lg text-bambu-gray/50 cursor-not-allowed",title:"You do not have permission to view system information",children:a.jsx(Cs,{className:"w-5 h-5"})}),a.jsx("a",{href:"https://github.com/maziggy/bambuddy",target:"_blank",rel:"noopener noreferrer",className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("nav.viewOnGithub"),children:a.jsx(xF,{className:"w-5 h-5"})}),a.jsx("button",{onClick:()=>A(!0),className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("nav.keyboardShortcuts"),children:a.jsx(yF,{className:"w-5 h-5"})}),a.jsx("button",{onClick:r,className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i(n==="dark"?"nav.switchToLight":"nav.switchToDark"),children:n==="dark"?a.jsx(XH,{className:"w-5 h-5"}):a.jsx(EN,{className:"w-5 h-5"})}),l&&o&&a.jsxs(a.Fragment,{children:[a.jsx("button",{onClick:()=>p(!0),className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("changePassword.title"),children:a.jsx(ao,{className:"w-5 h-5"})}),a.jsx("button",{onClick:c,className:"p-2 rounded-lg hover:bg-bambu-dark-tertiary transition-colors text-bambu-gray-light hover:text-white",title:i("nav.logout",{defaultValue:"Logout"}),children:a.jsx(wF,{className:"w-5 h-5"})})]})]})})]}),a.jsxs("main",{className:`flex-1 bg-bambu-dark overflow-auto transition-all duration-300 ${s?"mt-14":g?"ml-64":"ml-16"}`,children:[D?.enabled&&a.jsx("div",{className:"bg-amber-500/20 border-b border-amber-500/30 px-4 py-2 flex items-center justify-between",children:a.jsxs("div",{className:"flex items-center gap-2 text-sm",children:[a.jsx(Yx,{className:"w-4 h-4 text-amber-500 animate-pulse"}),a.jsxs("span",{className:"text-amber-200",children:[i("support.debugLoggingActive",{defaultValue:"Debug logging is active"}),W!==null&&a.jsxs("span",{className:"text-amber-300/70 ml-2",children:["(",Math.floor(W/60),"m ",W%60,"s)"]})]}),a.jsx("button",{onClick:()=>t("/system"),className:"text-amber-400 hover:text-amber-300 font-medium underline ml-2",children:i("support.manageLogs",{defaultValue:"Manage"})})]})}),M&&M.length>0&&a.jsx("div",{className:"bg-orange-500/20 border-b border-orange-500/30 px-4 py-2 flex items-center justify-between",children:a.jsxs("div",{className:"flex items-center gap-2 text-sm",children:[a.jsx(Oxe,{className:"w-4 h-4 text-orange-500"}),a.jsx("span",{className:"text-orange-200",children:i("printers.developerModeWarning",{names:M.map(xe=>xe.name).join(", "),defaultValue:`Developer LAN mode is not enabled on: ${M.map(xe=>xe.name).join(", ")}. Some features may not work.`})}),a.jsx("a",{href:"https://wiki.bambulab.com/en/knowledge-sharing/enable-developer-mode",target:"_blank",rel:"noopener noreferrer",className:"text-orange-400 hover:text-orange-300 font-medium underline ml-2",children:i("printers.howToEnable",{defaultValue:"How to enable"})})]})}),ke&&a.jsxs("div",{className:"bg-bambu-green/20 border-b border-bambu-green/30 px-4 py-2 flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-2 text-sm",children:[a.jsx(IM,{className:"w-4 h-4 text-bambu-green"}),a.jsx("span",{children:i("nav.updateAvailableBanner",{version:be?.latest_version,defaultValue:`Version ${be?.latest_version} is available!`})}),a.jsx("button",{onClick:()=>t("/settings"),className:"text-bambu-green hover:text-bambu-green/80 font-medium underline",children:i("nav.viewUpdate",{defaultValue:"View update"})})]}),a.jsx("button",{onClick:je,className:"p-1 hover:bg-bambu-dark-tertiary rounded transition-colors",title:i("common.dismiss",{defaultValue:"Dismiss"}),children:a.jsx(Bt,{className:"w-4 h-4"})})]}),a.jsx(RQ,{})]}),C&&a.jsx(Wye,{onClose:()=>A(!1),sidebarItems:he.map(xe=>{if(r1(xe)){const Fe=ye.get(xe);return Fe?{type:"external",label:Fe.name}:null}else{const Fe=le.get(xe);return Fe?{type:"nav",label:Fe.labelKey,labelKey:Fe.labelKey}:null}}).filter(Boolean)}),ue&&a.jsx("div",{className:"fixed inset-0 bg-black/70 flex items-center justify-center z-[100] p-4",children:a.jsx("div",{className:"bg-bambu-dark-secondary border-2 border-yellow-500 rounded-xl shadow-2xl max-w-md w-full animate-in fade-in zoom-in duration-200",children:a.jsxs("div",{className:"p-6 text-center",children:[a.jsx("div",{className:"w-16 h-16 mx-auto mb-4 rounded-full bg-yellow-500/20 flex items-center justify-center",children:a.jsx("svg",{className:"w-10 h-10 text-yellow-500",fill:"none",viewBox:"0 0 24 24",stroke:"currentColor",strokeWidth:2,children:a.jsx("path",{strokeLinecap:"round",strokeLinejoin:"round",d:"M12 9v2m0 4h.01m-6.938 4h13.856c1.54 0 2.502-1.667 1.732-3L13.732 4c-.77-1.333-2.694-1.333-3.464 0L3.34 16c-.77 1.333.192 3 1.732 3z"})})}),a.jsx("h2",{className:"text-xl font-bold text-yellow-400 mb-2",children:i("plateAlert.title")}),a.jsx("p",{className:"text-lg text-white mb-2",children:ue.printer_name}),a.jsx("p",{className:"text-bambu-gray mb-6",children:i("plateAlert.message")}),a.jsx("button",{onClick:()=>ie(null),className:"w-full py-3 px-6 bg-yellow-500 hover:bg-yellow-600 text-black font-semibold rounded-lg transition-colors",children:i("plateAlert.understand")})]})})}),m&&a.jsx("div",{className:"fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4",onClick:()=>{p(!1),x({currentPassword:"",newPassword:"",confirmPassword:""})},children:a.jsxs(wt,{className:"w-full max-w-md",onClick:xe=>xe.stopPropagation(),children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(ao,{className:"w-5 h-5 text-bambu-green"}),a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("changePassword.title")})]}),a.jsx(De,{variant:"ghost",size:"sm",onClick:()=>{p(!1),x({currentPassword:"",newPassword:"",confirmPassword:""})},children:a.jsx(Bt,{className:"w-5 h-5"})})]})}),a.jsxs(St,{children:[a.jsxs("div",{className:"space-y-4",children:[a.jsx("input",{type:"text",name:"username",autoComplete:"username",value:o?.username??"",readOnly:!0,hidden:!0,"aria-hidden":"true",tabIndex:-1}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("changePassword.currentPassword")}),a.jsx("input",{type:"password",value:f.currentPassword,onChange:xe=>x({...f,currentPassword:xe.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("changePassword.currentPasswordPlaceholder"),autoComplete:"current-password"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("changePassword.newPassword")}),a.jsx("input",{type:"password",value:f.newPassword,onChange:xe=>x({...f,newPassword:xe.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("changePassword.newPasswordPlaceholder"),autoComplete:"new-password",minLength:6})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("changePassword.confirmPassword")}),a.jsx("input",{type:"password",value:f.confirmPassword,onChange:xe=>x({...f,confirmPassword:xe.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${f.confirmPassword&&f.newPassword!==f.confirmPassword?"border-red-500":"border-bambu-dark-tertiary"}`,placeholder:i("changePassword.confirmPasswordPlaceholder"),autoComplete:"new-password",minLength:6}),f.confirmPassword&&f.newPassword!==f.confirmPassword&&a.jsx("p",{className:"text-red-400 text-xs mt-1",children:i("changePassword.passwordsDoNotMatch")})]})]}),a.jsxs("div",{className:"mt-6 flex justify-end gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{p(!1),x({currentPassword:"",newPassword:"",confirmPassword:""})},children:i("common.cancel")}),a.jsx(De,{onClick:async()=>{if(f.newPassword!==f.confirmPassword){u(i("changePassword.passwordsDoNotMatch"),"error");return}if(f.newPassword.length<6){u(i("changePassword.passwordTooShort"),"error");return}b(!0);try{await oe.changePassword(f.currentPassword,f.newPassword),u(i("changePassword.success"),"success"),p(!1),x({currentPassword:"",newPassword:"",confirmPassword:""})}catch(xe){const Fe=xe instanceof Error?xe.message:i("changePassword.failed");u(Fe,"error")}finally{b(!1)}},disabled:v||!f.currentPassword||!f.newPassword||f.newPassword!==f.confirmPassword||f.newPassword.length<6,children:v?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),i("changePassword.changing")]}):a.jsxs(a.Fragment,{children:[a.jsx(ao,{className:"w-4 h-4"}),i("changePassword.title")]})})]})]})]})}),a.jsx(mve,{})]})}function gve(t,e){const n=t.split(".").map(i=>parseInt(i,10)||0),r=e.split(".").map(i=>parseInt(i,10)||0);for(;n.length<4;)n.push(0);for(;r.length<4;)r.push(0);for(let i=0;i<4;i++)if(n[i]!==r[i])return n[i]-r[i];return 0}function i6(t,e,n,r){if(!t)return"";if(r)return`${t} — ${r}`;if(!e)return t;const i=e.match(/plate_(\d+)\.gcode/);return i&&parseInt(i[1],10)>1?`${t} — ${n("printers.plateNumber","Plate {{number}}",{number:i[1]})}`:t}const jF={"0300_4000":"Z axis homing failed; the task has been stopped.","0300_4001":"The printer timed out waiting for the nozzle to cool down before homing.","0300_4002":"Auto Bed Leveling failed; the task has been stopped.","0300_4005":"The hotend cooling fan speed is abnormal.","0300_4006":"The nozzle is clogged.","0300_4008":"The AMS failed to change filament.","0300_4009":"Homing XY axis failed.","0300_400A":"Mechanical resonance frequency identification failed.","0300_400B":"Internal communication exception","0300_400C":"The task was canceled.","0300_400D":"Resume failed after power loss.","0300_400E":"The motor self-check failed.","0300_400F":"The power supply voltage does not match the printer.","0300_4010":"Nozzle offset calibration failed.","0300_4011":"Flow Dynamics Calibration failed; please reinitiate printing or calibration.","0300_4013":"Printing cannot be initiated while AMS is drying.","0300_4014":"Homing Z axis failed: temperature control abnormality.","0300_4015":"Nozzle clumping detection calibration failed. Please go to 'Assistant' for troubleshooting.","0300_4016":"Nozzle cleaning failed. Please click the Assistant for troubleshooting.","0300_401F":"The hotend is not installed, and the toolhead cannot perform homing. Please install the hotend and then continue.","0300_4020":"The nozzle presence detection failed. Please check the Assistant for details.","0300_4021":"Nozzle offset calibration sensor signal abnormality detected. Please check the sensor and retry.","0300_4042":"The Laser Safety Window is not properly installed. The task has been stopped.","0300_4044":"The Flame Sensor is abnormal. The sensor may be short-circuited. Please troubleshoot the issue before starting a print job.","0300_404B":"Task aborted because the front door or top cover is open.","0300_404D":"The current temperature of the hotend, heatbed, or chamber is too high. Please wait for it to cool down to room temperature before restarting the task.","0300_4050":"Liveview Camera calibration timeout; please restart the printer.","0300_4052":"Blade Z-axis homing failed","0300_4057":"Z-axis step loss detected. The task has stopped. Please check if there are any obstructions beneath the heatbed.","0300_4066":"Calibration of motion precision failed.","0300_4067":"Calibration result is over the threshold.","0300_4068":"Step loss occurred during the motion accuracy enhancement process. Please try again.","0300_8000":"Printing was paused for unknown reason. You can select 'Resume' to resume the print job.","0300_8001":"Printing was paused by the user. You can select 'Resume' to continue printing.","0300_8002":"First layer defects were detected by the Micro Lidar. Please check the quality of the printed model before continuing your print.","0300_8003":"Spaghetti defects were detected by the AI Print Monitoring. Please check the quality of the printed model before continuing your print.","0300_8004":"Filament ran out. Please load new filament.","0300_8005":"Toolhead front cover fell off. Please remount the front cover and check to make sure your print is going okay.","0300_8006":"The build plate marker was not detected. Please confirm the build plate is correctly positioned on the heatbed with all four corners aligned, and the marker is visible.","0300_8007":"There was an unfinished print job when the printer lost power. If the model is still adhered to the build plate, you can try resuming the print job.","0300_8008":"Nozzle temperature malfunction","0300_8009":"Heatbed temperature malfunction","0300_800A":"A Filament pile-up was detected by AI Print Monitoring. Please clean filament from the waste chute.","0300_800B":"The cutter is stuck. Please make sure the cutter handle is out and check the filament sensor cable connection.","0300_800C":"Skipped step detected: auto-recover complete; please resume print and check if there are any layer shift problems.","0300_800D":"Detected that the extruder is not extruding normally. If the defects are acceptable, select 'Resume' to resume the print job.","0300_800E":"The print file is not available. Please check to see if the storage media has been removed.","0300_800F":"The door seems to be open, so printing was paused.","0300_8010":"The hotend cooling fan speed is abnormal.","0300_8011":"Detected build plate is not the same as the Gcode file. Please adjust slicer settings or use the correct plate.","0300_8013":"Printing paused due to the pause command added to the printing file.","0300_8014":"The nozzle is covered with filament, or the build plate is installed incorrectly. Please cancel this print and clean the nozzle or adjust the build plate according to the actual status. You can als...","0300_8015":"The filament on external spool has run out; please load new filament. If the filament is loaded, please select 'Resume'.","0300_8016":"The nozzle is clogged with filament. Please cancel this print and clean the nozzle or select 'Resume' to resume the print job.","0300_8017":"Foreign objects detected on heatbed. Please check and clean the heatbed. Then, select 'Resume' to resume the print job.","0300_8018":"Chamber temperature malfunction.","0300_8019":"No build plate is placed.","0300_801A":"Filament extrusion error; please check the assistant for troubleshooting. After resolving the issue, decide whether to cancel or resume the print job based on the actual print status.","0300_801B":"Nozzle temperature problem detected. Refer to Assistant to re-connect the hotend connector. POWER OFF the printer before this operation to avoid short circuits.","0300_801C":"The extrusion resistance is abnormal. The extruder may be clogged; please refer to the assistant. After trouble shooting, you can select 'Resume' to resume the print job.","0300_801D":"The extruder servo motor position sensor is malfunctioning. Please power off the printer first and check if the connection cable is loose.","0300_801E":"The extrusion motor is overloaded, please check the Assistant for details.","0300_8021":"The nozzle may not be installed or not properly installed. Please ensure the nozzle is correctly installed before proceeding.","0300_8022":"The heatbed may be obstructed while moving downward. Please clear any objects beneath the heatbed and check for any resistance or jamming during its movement.","0300_8028":"Nozzle offset calibration sensor error. If using a single hotend or the calibration function is disabled, you may ignore this and continue printing; otherwise, it is recommended to check the sensor...","0300_8041":"Platform detection timeout: please restart the printer.","0300_8042":"Task paused because the door is open.","0300_8043":"The laser module is abnormal.","0300_8044":"Fire was detected inside the chamber.","0300_8045":"Material detection timeout: please restart the printer.","0300_8046":"Foreign object detect timeout: please restart the printer.","0300_8047":"Quick-release lever detection time out: please restart the printer.","0300_8048":"Laser Module unlock has timed out, and the task cannot proceed. Please restart the printer and try again.","0300_8049":"The current plate is invalid.","0300_804A":"Emergency stop button improperly installed. Please reinstall according to the Wiki before proceeding.","0300_804B":"Task paused. The Laser Safety Window is open.","0300_804E":"This is a printing task. Please detach the Laser/Cutting Module from the Toolhead.","0300_804F":"The loading/unloading process is currently ongoing. Please stop the process or remove the laser/cutting module.","0300_8050":"This device does not support the 40W Laser Module. Please remove it or replace it with a 10W Laser Module.","0300_8051":"The cutting module has dropped or the cutting module cable is disconnected; please check the module.","0300_8053":"Laser module detected. Please install the right nozzle correctly to ensure proper Laser Module Mounting Calibration.","0300_8054":"Please place the paper required for Print Then Cut.","0300_8055":"The module mounted on the toolhead does not match the task. Please install the correct module.","0300_8057":"The rotary attachment is disconnected. Please ensure it is properly installed and the cable is securely plugged in.","0300_8058":"The rotary attachment is detected. Please remove it before continuing.","0300_8061":"The mode of Airflow System failed to activate; check the air door condition.","0300_8062":"The chamber temperature is too high. It may be due to high environmental temperature.","0300_8063":"The chamber temperature is too high. Please open the top cover and front door to cool down.","0300_8064":"The chamber temperature is too high. Please open the top cover and front door to cool down. (Open door detection for this print job will be set to 'Notification' level)","0300_8065":"The temperature of the MC module is too high. Please check the Wiki for possible explanations.","0300_8071":"The Toolhead Enhanced Cooling Fan module is malfunctioning.","0300_807D":"Fire Extinguisher not detected, the automatic extinguishing function will be unavailable.","0300_807E":"Fire Extinguisher not detected, the automatic extinguishing function will be unavailable.","0300_807F":"Fire Extinguisher is malfunctioning.","0300_8080":"Fire extinguisher motor reset failed.","0300_8081":"Fire extinguisher cylinder not installed. Please confirm on the extinguisher page.","0300_8082":"The Fire Extinguisher Gas Cylinder is empty.","0300_C012":"Please heat the nozzle to above 170°C.","0300_C056":"A minor fire was detected inside the chamber, and the Auto Fire Extinguishing process has been aborted.","0300_C070":"The fire extinguisher has been detected and is ready for use after the laser module is connected.","0500_4001":"Failed to connect to Bambu Cloud. Please check your network connection.","0500_4002":"Unsupported print file path or name. Please resend the print job.","0500_4003":"Printing stopped because the printer was unable to parse the file. Please resend your print job.","0500_4004":"Device is busy and cannot start new task. Please wait for current task to complete before sending new task.","0500_4005":"Print jobs are not allowed to be sent while updating firmware.","0500_4006":"There is not enough free storage space for the print job. Restoring to factory settings can free up available space.","0500_4007":"The device requires a repair upgrade, and printing is currently unavailable.","0500_4008":"Starting printing failed; please power cycle the printer and resend the print job.","0500_4009":"Print jobs are not allowed to be sent while updating logs.","0500_400A":"The file name is not supported. Please rename and restart the print job.","0500_400B":"There was a problem downloading a file. Please check your network connection and resend the print job.","0500_400C":"Please insert a MicroSD card and restart the print job.","0500_400D":"Please run a self-test and restart the print job.","0500_400E":"Printing was cancelled.","0500_400F":"AMS is initializing and cannot be upgraded at the moment. Please try again later.","0500_4010":"AMS is drying and cannot be upgraded at the moment. Please try again later.","0500_4011":"The printer is loading or unloading filament and cannot be upgraded at the moment. Please try again later.","0500_4012":"The device is printing and cannot be upgraded at the moment. Please try again later.","0500_4013":"AMS is in operation and cannot be upgraded at the moment. Please try again when it is idle.","0500_4014":"Slicing for the print job failed. Please check your settings and restart the print job.","0500_4015":"There is not enough free storage space for the print job. Please format or clear files from the MicroSD card to free up space.","0500_4016":"The MicroSD Card is write-protected. Please replace the MicroSD Card.","0500_4017":"Binding failed. Please retry or restart the printer and retry.","0500_4018":"Binding configuration information parsing failed; please try again.","0500_4019":"The printer has already been bound. Please unbind it and try again.","0500_401A":"Cloud access failed. Possible reasons include network instability caused by interference, inability to access the internet, or router firewall configuration restrictions. You can try moving the pri...","0500_401B":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0500_401C":"Cloud access is rejected. If you have tried multiple times and are still failing, please contact customer support.","0500_401D":"Cloud access failed, which may be caused by network instability due to interference. You can try moving the printer closer to the router before you try again.","0500_401E":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0500_401F":"Authorization timed out. Please make sure that your phone or PC has access to the internet, and ensure that the Bambu Studio/Bambu Handy APP is running in the foreground during the binding operation.","0500_4020":"Cloud access rejected. If you have tried multiple times and are still failing, please contact customer support.","0500_4021":"Cloud access failed, which may be caused by network instability due to interference. You can try moving the printer closer to the router before you try again.","0500_4022":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0500_4023":"Cloud access rejected. If you have tried multiple times and are still failing, please contact customer support.","0500_4024":"Cloud access failed. Possible reasons include network instability caused by interference, inability to access the internet, or router firewall configuration restrictions. You can try moving the pri...","0500_4025":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0500_4026":"Cloud access rejected. If you have tried multiple times and are still failing, please contact customer support.","0500_4027":"Cloud access failed; this may be caused by network instability due to interference. You can try moving the printer closer to the router before you try again.","0500_4028":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0500_4029":"Cloud access is rejected. If you have tried multiple times and are still failing, please contact customer support.","0500_402A":"Failed to connect to the router, which may be caused by wireless interference or being too far away from the router. Please try again or move the printer closer to the router and try again.","0500_402B":"Router connection failed due to incorrect password. Please check the password and try again.","0500_402C":"Failed to obtain IP address, which may be caused by wireless interference resulting in data transmission failure or the DHCP address pool of the router being full. Please move the printer closer to...","0500_402D":"System exception","0500_402E":"System does not support the file system currently used by the USB flash drive. Please replace or format the USB flash drive to FAT32.","0500_402F":"The MicroSD card sector data is damaged. Please use the SD card repair tool to repair or format it. If it still cannot be identified, please replace the MicroSD card.","0500_4030":"The device is currently upgrading. Please try again when it is idle.","0500_4031":"The accessory firmware does not match the printer. Please update it on the 'Firmware' page.","0500_4033":"The AMS firmware does not match the printer. Please update it on the 'Firmware' page.","0500_4034":"The Laser Module firmware does not match the printer. Please update it on the 'Firmware' page.","0500_4035":"The BirdsEye Camera is malfunctioning. Please try restarting the device. If the issue persists after multiple restarts, check the camera connection status or contact customer support.","0500_4037":"Your sliced file is not compatible with current printer model. This file can't be printed on this printer.","0500_4038":"The nozzle diameter in sliced file is not consistent with the current nozzle setting. This file can't be printed.","0500_4039":"The current task does not allow the installation of the laser/cutting module, and the task has been halted.","0500_403A":"The current temperature is too low. In order to protect you and your printer, printing tasks, moving an axis and other operations are disabled. Please move the printer to an environment above 10 de...","0500_403B":"Laser/cutting tasks cannot be initiated on the machine at the moment. Please use the computer software to start the task.","0500_403C":"The current nozzle setting does not match the slicing file. Continuing to print may affect print quality. It is recommended to re-slice before starting the print.","0500_403D":"The toolhead module is not set up. Please set it up before initiating the task.","0500_403E":"The current tool head does not support initialization.","0500_403F":"Failed to download print job; please check your network connection.","0500_4040":"The printer has reached its power limit. Please connect a dedicated power adapter to this AMS to enable drying.","0500_4041":"The AMS drying cannot be started during printing.","0500_4042":"Due to power limitations, starting AMS drying will pause current operations such as nozzle heating and fan running. Do you want to proceed with drying?","0500_4043":"Due to power limitations, only one AMS is allowed to use the device's power for drying.","0500_4044":"BirdsEye Camera malfunction: please contact customer support.","0500_4045":"Hotend check in progress. This operation is temporarily unavailable. Please wait.","0500_4050":"Error detected on the print board.","0500_4052":"Error detected on the hot end.","0500_4054":"Error detected on the mat.","0500_405D":"Laser module Serial Number error: unable to calibrate or make project.","0500_4065":"The task requires a Laser Platform, but the current one is a Cutting Platform. Please replace it, measure the material thickness in the software, and then restart the task.","0500_4070":"The laser or cutter module is connected, so the device cannot initiate a 3D printing task.","0500_4075":"No Laser Platform was detected, which may affect thickness measurement accuracy. Please place the laser platform correctly and ensure the rear markers are not blocked, then restart the thickness me...","0500_4076":"Please place the Laser Platform correctly and ensure the rear markers are not blocked, then restart the thickness measurement in the software before initiating the task.","0500_4097":"The device cannot detect the Laser Module. Please reconnect the module cable or restart the printer.","0500_4098":"The device cannot detect AMS A. Please reconnect the AMS cable or restart the printer.","0500_4099":"The firmware of Cutting Module does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0500_409A":"The firmware of the Air Pump does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0500_409B":"The firmware of the Laser Module does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0500_409D":"The firmware of AMS A does not match the printer; the device cannot continue working. Please upgrade it on the 'Firmware' page.","0500_409E":"The device cannot detect the Cutting Module. Please reconnect the module cable or restart the printer.","0500_409F":"The device cannot detect the Air Pump.  Please reconnect the module cable or restart the printer.","0500_40A0":"The Rotary Attachment module is not detected. Please reconnect the cable or restart the printer.","0500_40A1":"The Auto Fire Extinguishing System is not detected.  Please reconnect the module cable or restart the printer.","0500_40A3":"AMS(or AMS lite) A communication is abnormal. Please reconnect the module cable or restart the printer.","0500_40A4":"The current firmware only supports 1 AMS Lite. Please remove all AMS units before reconnecting the supported AMS Lite device.","0500_40A5":"The current firmware only supports AMS/AMS 2 Pro/AMS HT, with a maximum of 4 units. Please remove all AMS units before reconnecting the supported one.","0500_8013":"The print file is not available. Please check to see if the storage media has been removed.","0500_8036":"Your sliced file is not consistent with the current printer model. Continue?","0500_803C":"The current nozzle setting does not match the slicing file. Continuing to print may affect print quality. It is recommended to re-slice before starting the print.","0500_8040":"Toolhead front cover is detached. Moving the toolhead may damage the printer. Do you want to continue?","0500_8041":"The filament in hotend is too cold. Extrusion may damage the extruder. Still feeding in/out the filament?","0500_8048":"The module on the toolhead is not calibrated. Please cancel the task to perform calibration or switch to a calibrated module.","0500_8051":"Detected build plate is not the same as the Gcode file. Please adjust slicer settings or use the correct plate.","0500_8053":"Nozzle mismatch was detected during printing. Please initiate the print after re-slicing, or continue printing after replacing with the correct nozzle. Caution: the hotend temperature is high.","0500_8055":"Laser module is installed, but a Cutting Platform is detected. Please place a Laser Platform and perform laser calibration.","0500_8056":"Cutting module is installed, but the laser platform is detected. Please place the cutting platform for calibration.","0500_8058":"Please place the light grip cutting mat correctly and ensure the marker is exposed.","0500_8059":"Cutting platform base is not correctly aligned. Please ensure that the four corners of the platform are aligned with the heatbed.","0500_805A":"Please place the cutting mat on cutting protection base.","0500_805B":"The cutting mat type is unknown; please replace it with the correct cutting mat.","0500_805C":"The grip cutting mat type does not match; please place a LightGrip cutting mat.","0500_805E":"Cutting module Serial Number error: unable to calibrate or make project.","0500_8060":"The current module on toolhead does not meet requirements. Please replace the module as per the on-screen instructions.","0500_8061":"No print plate detected. Please make sure it is placed correctly.","0500_8062":"The print plate marker was not detected. Please confirm the print plate is correctly positioned on the heatbed with all four corners aligned, and the marker is visible. If strong light is shining o...","0500_8063":"The platform is not detected during calibration; please make sure the Laser Platform is properly placed.","0500_8064":"Please place the Laser Platform correctly and ensure the rear markers are not blocked for laser calibration.","0500_8066":"The task requires a Cutting Platform, but the current one is a Laser Platform. Please replace it with a Cutting Platform (Cutting Protection Base + LightGrip cutting mat).","0500_8067":"Please place a LightGrip cutting mat on the cutting protection base.","0500_8068":"Please place the strong grip cutting mat correctly and ensure the marker is exposed.","0500_8069":"Unable to recognize the left and right hotends. They might be third party hotends, or the hotend marks may be dirty. Please manually set the hotend types.","0500_806A":"Unable to recognize the left and right hotends. They might be third party hotends, or the hotend marks may be dirty. Please set hotend types on printer screen before next print.","0500_806B":"Quick-release Lever is not locked. Please press down the external toolhead module to ensure it is properly seated, then push down the level to lock it in place.","0500_806C":"Please place the cutting platform correctly and ensure the marker is exposed.","0500_806D":"Material not detected. Please confirm placement and continue.","0500_806E":"Foreign objects detected on heatbed; please check and clean up the heatbed.","0500_806F":"The grip cutting mat type does not match; please place a StrongGrip cutting mat.","0500_8071":"No cutting platform was detected. Please confirm that it has been correctly placed.","0500_8072":"Live View camera is blocked","0500_8073":"Heatbed limit block is obstructed or contaminated. Please clean and ensure the limit block is visible, otherwise platform position offset detection may be inaccurate.","0500_8074":"The Laser Platform is offset. Please ensure that the four corners of the platform are aligned with the heatbed, and the marker is not obstructed.","0500_8077":"The visual marker was not detected. Please ensure the paper is properly placed.","0500_8078":"Current material does not match the sliced file settings. Please load the correct material and ensure the QR code on the material is not damaged or dirty.","0500_8079":"Please place the Laser Test Material (350g paperboard) and position support strips underneath to prevent material warping.","0500_807A":"The foreign object detection function is not working. You can continue the task or check the assistant for troubleshooting.","0500_807B":"Please place the cutting platform (cutting protection base + LightGrip cutting mat).","0500_807C":"Please place the cutting platform (cutting protection base + StrongGrip cutting mat).","0500_807D":"This task requires a Cutting Platform, but the current one is a Laser Platform. Please replace it with a Cutting Platform (Cutting Protection Base + StrongGrip Cutting Mat).","0500_807E":"Please place a StrongGrip cutting mat on the cutting protection base.","0500_8080":"The left and right hotends are not installed.","0500_8081":"The left and right hotends are not installed.","0500_8082":"Please remove the protective film on the Opaque Glossy Acrylic before processing","0500_8083":"Material is not allowed in Mounting Calibration. Please remove the material from the platform.","0500_8084":"The Live View Camera is dirty; please clean it and continue.","0500_8085":"Toolhead camera is obstructed","0500_8086":"Toolhead Camera is dirty, which affects the AI function; please clean the lens surface.","0500_8087":"BirdsEye camera is obstructed","0500_8088":"The Birdseye Camera is dirty","0500_8089":"Task paused due to Presence Check failed. Please check the printer to continue.","0500_808A":"The BirdsEye Camera is installed offset. Please refer to the assistant to reinstall it.","0500_808B":"The BirdsEye Camera setup failed. Please remove all objects and the mat on the heatbed to ensure the heatbed markers are visible. Meanwhile, please ensure the BirdsEye Camera is installed correctly...","0500_808C":"Detected build plate offset. Please align the build plate with the heatbed, and then continue.","0500_808D":"The Cutting Module offset calibration failed, which may result in inaccurate cuts. Please ensure the cutting material is properly positioned and check whether the cutting blade tip is worn.","0500_808E":"BirdsEye Camera initialization failed. The toolhead camera did not detect the Heatbed features. Please clean the Heatbed, remove all objects and pads, and ensure the bed markings are visible. Check...","0500_808F":"Nozzle camera lens is dirty, affecting AI monitoring. Clean the lens with a non-woven cloth and a small amount of alcohol. Beware of hotend heat; wait for it to cool before handling.","0500_8090":"Please attach the 80g White Printing Paper to the center area of the platform.","0500_8091":"The Cutting Module offset calibration failed, which may result in inaccurate cuts. Please ensure the 80g white printer paper(letter paper thickness) is properly positioned and check whether the cut...","0500_8092":"Toolhead Camera initialization failed. This print can still continue, but some AI functions will be disabled. If you encounter this issue again after restarting, please contact customer support.","0500_8093":"The nozzle silicone sleeve is not installed; there is a risk of temperature control failure. Please install it correctly and try again.","0500_80A0":"The visual encoder board was not detected. Please check if the board is properly placed and aligned at all four corners, and ensure the positioning markings are clear and free from wear.","0500_C010":"MicroSD Card read/write exception: please reinsert or replace the MicroSD Card.","0500_C032":"Laser/Cutting module connected to the toolhead. The drying process has been automatically stopped.","0500_C036":"This is a printing task. Please detach the Laser/Cutting Module from the Toolhead.","0500_C07F":"Device is busy and cannot perform this operation. To proceed, please pause or stop the current task.","0501_4017":"Binding failed. Please retry or restart the printer and retry.","0501_4018":"Binding configuration information parsing failed; please try again.","0501_4019":"The printer has already been bound. Please unbind it and try again.","0501_401A":"Cloud access failed. Possible reasons include network instability caused by interference, inability to access the internet, or router firewall configuration restrictions. You can try moving the pri...","0501_401B":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0501_401C":"Cloud access is rejected. If you have tried multiple times and are still failing, please contact customer support.","0501_401D":"Cloud access failed, which may be caused by network instability due to interference. You can try moving the printer closer to the router before you try again.","0501_401E":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0501_401F":"Authorization timed out. Please make sure that your phone or PC has access to the internet, and ensure that the Bambu Studio/Bambu Handy APP is running in the foreground during the binding operation.","0501_4020":"Cloud access rejected. If you have tried multiple times and are still failing, please contact customer support.","0501_4021":"Cloud access failed, which may be caused by network instability due to interference. You can try moving the printer closer to the router before you try again.","0501_4022":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0501_4023":"Cloud access rejected. If you have tried multiple times and are still failing, please contact customer support.","0501_4024":"Cloud access failed. Possible reasons include network instability caused by interference, inability to access the internet, or router firewall configuration restrictions. You can try moving the pri...","0501_4025":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0501_4026":"Cloud access rejected. If you have tried multiple times and are still failing, please contact customer support.","0501_4027":"Cloud access failed; this may be caused by network instability due to interference. You can try moving the printer closer to the router before you try again.","0501_4028":"Cloud response is invalid. If you have tried multiple times and are still failing, please contact customer support.","0501_4029":"Cloud access is rejected. If you have tried multiple times and are still failing, please contact customer support.","0501_4031":"Device discovery binding is in progress, and the QR code cannot be displayed on the screen. You can wait for the binding to finish or abort the device discovery binding process in the APP/Studio an...","0501_4032":"QR code binding is in progress, so device discovery binding cannot be performed. You can scan the QR code on the screen for binding or exit the QR code display page on screen and try device discove...","0501_4033":"Your APP region does not match with your printer; please download the APP in the corresponding region and register your account again.","0501_4034":"The slicing progress has not been updated for a long time, and the printing task has exited. Please confirm the parameters and reinitiate printing.","0501_4035":"The device is in the process of binding and cannot respond to new binding requests.","0501_4038":"The regional settings do not match the printer; please check the printer's regional settings.","0501_4039":"Device login has expired; please try to bind again.","0501_4098":"The device cannot detect AMS B. Please reconnect the AMS cable or restart the printer.","0501_409D":"The firmware of AMS B does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0501_40A3":"AMS(or AMS lite) B communication is abnormal. Please reconnect the module cable or restart the printer.","0502_4001":"Current filament will be used in this print job. Settings cannot be changed.","0502_4002":"Please go to “Settings > Calibration” to run the Motion Accuracy Enhancement Calibration before turning on Motion Accuracy Enhancement mode.","0502_4003":"The printer is currently printing and the motion accuracy enhancement feature cannot be turned on or off.","0502_4004":"Some features are not supported by the current device. Please check the Studio feature settings or update the firmware to the latest version.","0502_4005":"The AMS has not been calibrated yet, so printing cannot be initiated.","0502_4006":"Unknown module detected; please try updating the firmware to the latest version.","0502_400D":"Failed to start a new task: filament loading/unloading not completed.","0502_400E":"Failed to start a new task: The nozzle cold pull was not completed.","0502_4013":"This device is not compatible with the 40W laser module. Please replace it with a 10W laser module or remove it.","0502_4098":"The device cannot detect AMS C. Please reconnect the AMS cable or restart the printer.","0502_409D":"The firmware of AMS C does not match the printer; the device cannot continue working. Please upgrade it on the 'Firmware' page.","0502_40A3":"AMS(or AMS lite) C communication is abnormal. Please reconnect the module cable or restart the printer.","0502_C00F":"The device is busy and cannot perform nozzle identification.","0502_C010":"Due to printer power limitations, printing, calibration, controls and other actions cannot be performed during AMS drying. Please stop the drying process before proceeding with any other operation.","0502_C011":"Currently in 2D production mode. Please continue the operation on the printer","0502_C012":"The task cannot be paused.","0502_C014":"The AMS Remaining Filament Estimation is enabled by default and cannot be disabled.","0502_C024":"The flow dynamic calibration records have exceeded the storage limit. Please delete some historical records in the slicer software before adding new calibration data.","0503_4098":"The device cannot detect AMS D. Please reconnect the AMS cable or restart the printer.","0503_409D":"The firmware of AMS D does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0503_40A3":"AMS(or AMS lite) D communication is abnormal. Please reconnect the module cable or restart the printer.","0580_4096":"The device cannot detect AMS-HT A. Please reconnect the AMS-HT cable or restart the printer.","0580_409C":"The firmware of AMS-HT A does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0580_40A2":"AMS-HT A communication is abnormal. Please reconnect the module cable or restart the printer.","0581_4096":"The device cannot detect AMS-HT B. Please reconnect the AMS-HT cable or restart the printer.","0581_409C":"The firmware of AMS-HT B does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0581_40A2":"AMS-HT B communication is abnormal. Please reconnect the module cable or restart the printer.","0582_4096":"The device cannot detect AMS-HT C. Please reconnect the AMS-HT cable or restart the printer.","0582_409C":"The firmware of AMS-HT C does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0582_40A2":"AMS-HT C communication is abnormal. Please reconnect the module cable or restart the printer.","0583_4096":"The device cannot detect AMS-HT D. Please reconnect the AMS-HT cable or restart the printer.","0583_409C":"The firmware of AMS-HT D does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0583_40A2":"AMS-HT D communication is abnormal. Please reconnect the module cable or restart the printer.","0584_4096":"The device cannot detect AMS-HT F. Please reconnect the AMS-HT cable or restart the printer.","0584_409C":"The firmware of AMS-HT E does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0584_40A2":"AMS-HT E communication is abnormal. Please reconnect the module cable or restart the printer.","0585_4096":"The device cannot detect AMS-HT E. Please reconnect the AMS-HT cable or restart the printer.","0585_409C":"The firmware of AMS-HT F does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0585_40A2":"AMS-HT F communication is abnormal. Please reconnect the module cable or restart the printer.","0586_4096":"The device cannot detect AMS-HT G. Please reconnect the AMS-HT cable or restart the printer.","0586_409C":"The firmware of AMS-HT G does not match the printer; the device cannot continue working. Please update it on the 'Firmware' page.","0586_40A2":"AMS-HT G communication is abnormal. Please reconnect the module cable or restart the printer.","0587_4096":"The device cannot detect AMS-HT H. Please reconnect the AMS-HT cable or restart the printer.","0587_409C":"The firmware of AMS-HT H does not match the printer; the device cannot continue working. Please upgrade it on the 'Firmware' page.","0587_40A2":"AMS-HT H communication is abnormal. Please reconnect the module cable or restart the printer.","05FE_8053":"The left nozzle is not matched with slicing file. Please initiate the print after re-slicing, or continue printing after replacing with the correct nozzle. Caution: the hotend temperature is high.","05FE_8069":"Unable to recognize the left hotend. It might be a third party hotend, or the hotend mark may be dirty. Please manually set the hotend type.","05FE_806A":"Unable to recognize the left hotend. It might be a third party hotend, or the hotend mark may be dirty. Please set hotend type on printer screen before next print.","05FE_8080":"The left hotend is not installed.","05FE_8081":"The left hotend is not installed.","05FF_8053":"The right nozzle is not matched with slicing file. Please initiate the print after re-slicing, or continue printing after replacing with the correct nozzle. Caution: the hotend temperature is high.","05FF_8069":"Unable to recognize the right hotend. It might be a third party hotend, or the hotend mark may be dirty. Please manually set the hotend type.","05FF_806A":"Unable to recognize the right hotend. It might be a third party hotend, or the hotend mark may be dirty. Please set hotend type on printer screen before next print.","05FF_8080":"The right hotend is not installed.","05FF_8081":"The right hotend is not installed.","0700_4001":"The AMS has been disabled for a print, but it still has filament loaded. Please unload the AMS filament and switch to the spool holder filament for printing.","0700_4025":"Failed to read the filament information.","0700_8001":"Failed to cut the filament. Please check the cutter.","0700_8002":"The cutter is stuck. Please make sure the cutter handle is out.","0700_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0700_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0700_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0700_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0700_8007":"Extruding filament failed. The extruder might be clogged.","0700_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS A to the extruder is properly connected.","0700_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0700_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0700_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0700_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0700_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0700_8017":"AMS A is drying. Please stop drying process before loading/unloading material.","0700_8021":"AMS setup failed; please refer to the assistant.","0700_8023":"AMS A cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0700_C069":"An error occurred during AMS A drying. Please go to Assistant for more details.","0700_C06A":"AMS A is reading RFID. Unable to start drying. Please try again later.","0700_C06B":"AMS A is changing filament. Unable to start drying. Please try again later.","0700_C06C":"AMS A is in Feed Assist Mode. Unable to start drying. Please try again later.","0700_C06D":"AMS A is assisting in filament insertion. Unable to start drying. Please try again later.","0700_C06E":"AMS A motor is performing self-test. Unable to start drying. Please try again later.","0701_4001":"Filament is still loaded from the AMS after it has been disabled. Please unload the filament, load from the spool holder, and restart printing.","0701_4025":"Failed to read the filament information.","0701_8001":"Failed to cut the filament. Please check the cutter.","0701_8002":"The cutter is stuck. Please make sure the cutter handle is out.","0701_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0701_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0701_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0701_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0701_8007":"Extruding filament failed. The extruder might be clogged.","0701_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS B to the extruder is properly connected.","0701_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0701_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0701_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0701_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0701_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0701_8017":"AMS B is drying. Please stop drying process before loading/unloading material.","0701_8021":"AMS setup failed; please refer to the assistant.","0701_8023":"AMS B cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0701_C069":"An error occurred during AMS B drying. Please go to Assistant for more details.","0701_C06A":"AMS B is reading RFID. Unable to start drying. Please try again later.","0701_C06B":"AMS B is changing filament. Unable to start drying. Please try again later.","0701_C06C":"AMS B is in Feed Assist Mode. Unable to start drying. Please try again later.","0701_C06D":"AMS B is assisting in filament insertion. Unable to start drying. Please try again later.","0701_C06E":"AMS B motor is performing self-test. Unable to start drying. Please try again later.","0702_4001":"Filament is still loaded from the AMS after it has been disabled. Please unload the filament, load from the spool holder, and restart printing.","0702_4025":"Failed to read the filament information.","0702_8001":"Failed to cut the filament. Please check the cutter.","0702_8002":"The cutter is stuck. Please make sure the cutter handle is out.","0702_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0702_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0702_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0702_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0702_8007":"Extruding filament failed. The extruder might be clogged.","0702_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS C to the extruder is properly connected.","0702_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0702_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0702_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0702_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0702_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0702_8017":"AMS C is drying. Please stop drying process before loading/unloading material.","0702_8021":"AMS setup failed; please refer to the assistant.","0702_8023":"AMS C cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0702_C069":"An error occurred during AMS C drying. Please go to Assistant for more details.","0702_C06A":"AMS C is reading RFID. Unable to start drying. Please try again later.","0702_C06B":"AMS C is changing filament. Unable to start drying. Please try again later.","0702_C06C":"AMS C is in Feed Assist Mode. Unable to start drying. Please try again later.","0702_C06D":"AMS C is assisting in filament insertion. Unable to start drying. Please try again later.","0702_C06E":"AMS C motor is performing self-test. Unable to start drying. Please try again later.","0703_4001":"Filament is still loaded from the AMS after it has been disabled. Please unload the filament, load from the spool holder, and restart printing.","0703_4025":"Failed to read the filament information.","0703_8001":"Failed to cut the filament. Please check the cutter.","0703_8002":"The cutter is stuck. Please make sure the cutter handle is out.","0703_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0703_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0703_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0703_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0703_8007":"Extruding filament failed. The extruder might be clogged.","0703_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS D to the extruder is properly connected.","0703_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0703_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0703_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0703_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0703_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0703_8017":"AMS D is drying. Please stop drying process before loading/unloading material.","0703_8021":"AMS setup failed; please refer to the assistant.","0703_8023":"AMS D cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0703_C069":"An error occurred during AMS D drying. Please go to Assistant for more details.","0703_C06A":"AMS D is reading RFID. Unable to start drying. Please try again later.","0703_C06B":"AMS D is changing filament. Unable to start drying. Please try again later.","0703_C06C":"AMS D is in Feed Assist Mode. Unable to start drying. Please try again later.","0703_C06D":"AMS D is assisting in filament insertion. Unable to start drying. Please try again later.","0703_C06E":"AMS D motor is performing self-test. Unable to start drying. Please try again later.","0704_4025":"Failed to read the filament information.","0704_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0704_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0704_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0704_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0704_8007":"Extruding filament failed. The extruder might be clogged.","0704_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS E to the extruder is properly connected.","0704_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0704_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0704_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0704_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0704_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0704_8021":"AMS setup failed; please refer to the assistant.","0704_8023":"AMS E cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0705_4025":"Failed to read the filament information.","0705_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0705_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0705_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0705_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0705_8007":"Extruding filament failed. The extruder might be clogged.","0705_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS F to the extruder is properly connected.","0705_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0705_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0705_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0705_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0705_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0705_8021":"AMS setup failed; please refer to the assistant.","0705_8023":"AMS F cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0706_4025":"Failed to read the filament information.","0706_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0706_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0706_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0706_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0706_8007":"Extruding filament failed. The extruder might be clogged.","0706_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS G to the extruder is properly connected.","0706_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0706_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0706_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0706_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0706_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0706_8021":"AMS setup failed; please refer to the assistant.","0706_8023":"AMS G cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","0707_4025":"Failed to read the filament information.","0707_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","0707_8004":"AMS failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","0707_8005":"The AMS failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","0707_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","0707_8007":"Extruding filament failed. The extruder might be clogged.","0707_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS H to the extruder is properly connected.","0707_8010":"The AMS assist motor is overloaded. This could be due to entangled filament or a stuck spool.","0707_8011":"AMS filament ran out. Please insert a new filament into the same AMS slot.","0707_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","0707_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","0707_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","0707_8021":"AMS setup failed; please refer to the assistant.","0707_8023":"AMS H cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","07FE_8001":"Failed to cut the filament of the left extruder. Please check the cutter.","07FE_8002":"The cutter of the left extruder is stuck. Please pull out the cutter handle.","07FE_8003":"Please pull out the filament on the spool holder  of the left extruder. If this message persists, please check to see if there is filament broken in the extruder. (Connect a PTFE tube if you are ab...","07FE_8004":"Failed to pull back the filament from the left extruder. Please check whether the filament is stuck inside the extruder.","07FE_8005":"Failed to feed the filament outside the AMS. Please clip the end of the filament flat and check to see if the spool is stuck.","07FE_8006":"Please feed filament into the PTFE tube of the left extruder until it can not be pushed any farther.","07FE_8007":"Please observe the nozzle of the left extruder. If the filament has been extruded, select 'Continue'; if it has not, please push the filament forward slightly, and then select 'Retry'.","07FE_8010":"Check if the left external filament spool or filament is stuck.","07FE_8011":"The external filament connected to the left extruder has run out; please load a new filament.","07FE_8012":"Failed to get mapping table; please select 'Resume' to retry.","07FE_8013":"Timeout purging old filament of the left extruder: Please check if the filament is stuck or the extruder is clogged.","07FE_8020":"Extruder change failed; please refer to the assistant.","07FE_8021":"AMS setup failed; please refer to the assistant.","07FE_8024":"Extruder position calibration failed; please refer to the assistant.","07FE_8025":"Cold pull timed out. Please promptly operate or check whether the filament is broken inside the extruder, and click the Assistant for details.","07FE_8030":"The filament specified in the slicer has been used up. Printing is paused. Please go to the machine to replace the material and resume printing.","07FE_C003":"Please pull out the filament on the spool holder of the left extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube i...","07FE_C006":"Please feed filament into the PTFE tube of the left extruder until it can not be pushed any farther.","07FE_C008":"Please pull out the filament on the spool holder of the left extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube i...","07FE_C009":"Please feed filament into the PTFE tube of the left extruder until it can not be pushed any farther.","07FE_C00A":"Please observe the nozzle of the left extruder. If the filament has been extruded, select 'Continue'; if not, please push the filament forward slightly and then select 'Retry'.","07FE_C010":"Insert the filament (over 30cm long) until it stops. You might see slight smoke during flushing. After insertion, close the front door and top cover.","07FE_C011":"Please manually and slowly pull out the filament from the extruder. Then click “Continue”.","07FE_C012":"Press the black PTFE tube coupler and unplug the PTFE tube. After completing the operation, click 'Continue.'","07FF_4001":"Filament is still loaded from the AMS after it has been disabled. Please unload the filament, load from the spool holder, and restart printing.","07FF_8001":"Failed to cut the filament of the right extruder. Please check the cutter.","07FF_8002":"The cutter is stuck. Please make sure the cutter handle is out.","07FF_8003":"Please pull out the filament on the spool holder  of the right extruder. If this message persists, please check to see if there is filament broken in the extruder. (Connect a PTFE tube if you are a...","07FF_8004":"Failed to pull back the filament from the right extruder. Please check whether the filament is stuck inside the extruder.","07FF_8005":"Failed to feed the filament outside the AMS. Please clip the end of the filament flat and check to see if the spool is stuck.","07FF_8006":"Please feed filament into the PTFE tube of the right extruder until it can not be pushed any farther.","07FF_8007":"Please observe the nozzle of the right extruder. If the filament has been extruded, select 'Continue'; if it has not, please push the filament forward slightly, and then select 'Retry'.","07FF_8010":"Check if the external filament spool or filament is stuck.","07FF_8011":"External filament has run out; please load a new filament.","07FF_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","07FF_8013":"Timeout purging old filament of the right extruder: Please check if the filament is stuck or the extruder is clogged.","07FF_8020":"Extruder change failed; please refer to the assistant.","07FF_8021":"AMS setup failed; please refer to the assistant.","07FF_8024":"Extruder position calibration failed; please refer to the assistant.","07FF_8025":"Cold pull timed out. Please promptly operate or check whether the filament is broken inside the extruder, and click the Assistant for details.","07FF_8030":"The filament specified in the slicer has been used up. Printing is paused. Please go to the machine to replace the material and resume printing.","07FF_C003":"Please pull out the filament on the spool holder of the right extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube ...","07FF_C006":"Please feed filament into the PTFE tube of the right extruder until it can not be pushed any farther.","07FF_C008":"Please pull out the filament on the spool holder of the right extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube ...","07FF_C009":"Please feed filament into the PTFE tube of the right extruder until it can not be pushed any farther.","07FF_C00A":"Please observe the nozzle of the right extruder. If the filament has been extruded, select 'Continue'; if not, please push the filament forward slightly and then select 'Retry'.","07FF_C010":"Insert the filament (over 30cm long) until it stops. You might see slight smoke during flushing. After insertion, close the front door and top cover.","07FF_C011":"Hold the driven wheel bracket, slowly pull the filament from the extruder, then press 'Continue'.","07FF_C012":"Press the black PTFE tube coupler and unplug the PTFE tube. After completing the operation, click 'Continue.'","0C00_4020":"The setup of BirdsEye Camera failed. Please clear all objects and remove the mat. Make sure the marker is not obstructed. Meanwhile, clean both the BirdsEye Camera and Toolhead Camera, and remove a...","0C00_4021":"The setup of BirdsEye Camera failed; please reboot the printer.","0C00_4022":"The setup of BirdsEye Camera failed.  Please check if the laser module is working properly.","0C00_4024":"The Birdseye Camera is installed offset. Please refer to the assistant to reinstall it.","0C00_4025":"The Birdseye Camera is dirty. Please clean it and restart the process.","0C00_4026":"The Live View Camera initialization failed; please reboot the printer.","0C00_4027":"The Live View Camera calibration failed. Please refer to the assistant for details and recalibrate the camera after processing.","0C00_4029":"Material not detected. Please confirm placement and continue.","0C00_402A":"The visual marker was not detected. Please re-paste the paper in the correct position.","0C00_402C":"Device data link error. Please reboot the printer","0C00_402D":"The toolhead camera is not working properly; please reboot the device.","0C00_403D":"The vision encoder plate was not detected. Please confirm it is correctly positioned on the heatbed.","0C00_403E":"The high-precision nozzle offset calibration has failed, possibly due to a damaged pattern or the similarity of the colors of the two selected filaments. Please clear the printed pattern and replac...","0C00_4041":"Toolhead camera calibration failed. Please ensure the Calibration Marker on the heatbed or Height Calibration Marker on the homing area is clean and undamaged, then re-run the calibration process.","0C00_8001":"First layer defects were detected. If the defects are acceptable, select 'Resume' to resume the print job.","0C00_8005":"Purged filament has piled up in the waste chute, which may cause a tool head collision.","0C00_8009":"Build plate localization marker was not found.","0C00_800B":"The heatbed marker was not detected. Please clear all objects and remove the mat. Make sure the marker is not obstructed.","0C00_8015":"Objects detected on the platform; please clean them up in a timely manner.","0C00_8016":"The foreign object detection function is not working. You can continue the task or check assistant for solutions.","0C00_8017":"Foreign objects detected on the platform; please clean them up on time.","0C00_8018":"The foreign object detection function is not working. You can continue the task or view the assistant for troubleshooting.","0C00_8033":"Quick-release Lever is not locked. Please push it down to secure.","0C00_8034":"Liveview Camera initialization failed. This print can still continue, but some AI functions will be disabled. If you encounter this issue again after restarting, please contact customer support.","0C00_803F":"AI detected nozzle clumping. Please check the nozzle condition. Refer to assistant for solutions.","0C00_8040":"AI detected air-printing defect. Please check the hotend extrusion status. Refer to assistant for solutions.","0C00_8042":"The AI print monitor has detected a spaghetti defect. Please check the print and take the necessary action.","0C00_8043":"AI detected nozzle clumping. Please check the nozzle condition. Refer to assistant for solutions.","0C00_C003":"Possible defects were detected in the first layer.","0C00_C004":"Possible spaghetti failure was detected.","0C00_C006":"Purged filament may have piled up in the waste chute.","1000_C001":"High bed temperature may lead to filament clogging in the nozzle. You may open the chamber door.","1000_C002":"Printing CF material with stainless steel may cause nozzle damage.","1000_C003":"Enabling Timelapse in traditional mode may cause defects; please activate this feature as needed.","1001_4001":"Timelapse is not supported as Spiral Vase mode is enabled in slicing presets.","1001_4002":"Timelapse is not supported as the Print sequence is set to 'By object'.","1001_8003":"The time-lapse mode is set to Traditional in the slicing file. This may cause surface defects. Would you like to enable it?","1001_8004":"Prime Tower is not enabled and time-lapse mode is set to Smooth in slicing file. This may cause surface defects. Would you like to enable it?","1200_4001":"Filament is still loaded from the AMS when it has been disabled. Please unload AMS filament, load from spool holder, and restart print job.","1200_8001":"Cutting the filament failed. Please check to see if the cutter is stuck. Refer to the Assistant for solutions.","1200_8002":"The cutter is stuck. Please pull out the cutter handle.","1200_8003":"Failed to pull out the filament from the extruder. Please check whether the extruder is clogged or whether the filament is broken inside the extruder.","1200_8004":"Failed to pull back the filament from the toolhead. Please check whether the filament is stuck.","1200_8005":"The filament is not inserted. Please insert the filament.","1200_8006":"Unable to feed filament into the extruder. This could be due to tangled filament or a stuck spool. If not, please check if the AMS PTFE tube is connected.","1200_8007":"Failed to extrude the filament. This might be caused by clogged extruder or stuck filament. Refer to the Assistant for solutions.","1200_8010":"Filament or spool may be stuck.","1200_8011":"AMS filament has run out. Please insert a new filament into the same AMS slot.","1200_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1200_8013":"Timeout while purging old filament. Please check if the filament is stuck or the extruder clogged.","1200_8014":"The filament location in the toolhead was not found. Refer to the Assistant for solutions.","1200_8015":"Failed to pull out the filament from the toolhead. Please check if the filament is stuck, or if it is broken inside the extruder or PTFE tube.","1200_8016":"The extruder is not extruding normally. Refer to the Assistant for troubleshooting. There may be defects in this layer, but you may resume if the defects are acceptable.","1201_4001":"Filament is still loaded from the AMS when it has been disabled. Please unload AMS filament, load from spool holder, and restart print job.","1201_8001":"Failed to cut the filament. Please check the cutter.","1201_8002":"The cutter is stuck. Please pull out the cutter handle.","1201_8003":"Failed to pull out the filament from the extruder. Please check whether the extruder is clogged or whether the filament is broken inside the extruder.","1201_8004":"Failed to pull back the filament from the toolhead. Please check whether the filament is stuck.","1201_8005":"Failed to feed the filament. Please load the filament and then select 'Retry'.","1201_8006":"Failed to feed the filament into the toolhead. Please check whether the filament is stuck.","1201_8007":"Failed to extrude the filament. The extruder may be clogged or the filament may be stuck; please refer to HMS.","1201_8010":"Please check if the spool or filament is stuck.","1201_8011":"AMS filament has run out. Please insert a new filament into the same AMS slot.","1201_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1201_8013":"Timeout while purging old filament. Please check if the filament is stuck or the extruder clogged.","1201_8014":"Failed to check the filament location in the tool head; please refer to the HMS.","1201_8015":"Failed to pull back the filament from the toolhead. Please check if the filament is stuck or the filament is broken inside the extruder.","1201_8016":"The extruder is not extruding normally; please refer to the HMS. After trouble shooting, if the defects are acceptable, please resume printing.","1202_4001":"Filament is still loaded from the AMS when it has been disabled. Please unload AMS filament, load from spool holder, and restart print job.","1202_8001":"Failed to cut the filament. Please check the cutter.","1202_8002":"The cutter is stuck. Please pull out the cutter handle.","1202_8003":"Failed to pull out the filament from the extruder. Please check whether the extruder is clogged or whether the filament is broken inside the extruder.","1202_8004":"Failed to pull back the filament from the toolhead. Please check whether the filament is stuck.","1202_8005":"The filament is not inserted. Please insert the filament.","1202_8006":"Failed to feed the filament into the toolhead. Please check whether the filament is stuck.","1202_8007":"Failed to extrude the filament. The extruder may be clogged or the filament may be stuck; please refer to HMS.","1202_8010":"Please check if the spool or filament is stuck.","1202_8011":"AMS filament has run out. Please insert a new filament into the same AMS slot.","1202_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1202_8013":"Timeout while purging old filament. Please check if the filament is stuck or the extruder clogged.","1202_8014":"Failed to check the filament location in the tool head; please refer to the HMS.","1202_8015":"Failed to pull back the filament from the toolhead. Please check if the filament is stuck or is broken inside the extruder.","1202_8016":"The extruder is not extruding normally; please refer to the HMS. After trouble shooting, if the defects are acceptable, please resume printing.","1203_4001":"Filament is still loaded from the AMS when it has been disabled. Please unload AMS filament, load from spool holder, and restart print job.","1203_8001":"Failed to cut the filament. Please check the cutter.","1203_8002":"The cutter is stuck. Please pull out the cutter handle.","1203_8003":"Failed to pull out the filament from the extruder. Please check whether the extruder is clogged or whether the filament is broken inside the extruder.","1203_8004":"Failed to pull back the filament from the toolhead. Please check whether the filament is stuck.","1203_8005":"The filament is not inserted. Please insert the filament.","1203_8006":"Failed to feed the filament into the toolhead. Please check whether the filament is stuck.","1203_8007":"Failed to extrude the filament. The extruder may be clogged or the filament may be stuck; please refer to HMS.","1203_8010":"Please check if the spool or filament is stuck.","1203_8011":"AMS filament has run out. Please insert a new filament into the same AMS slot.","1203_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1203_8013":"Timeout while purging old filament. Please check if the filament is stuck or the extruder clogged.","1203_8014":"Failed to check the filament location in the tool head; please refer to the HMS.","1203_8015":"Failed to pull back the filament from the toolhead. Please check if the filament is stuck or is broken inside the extruder.","1203_8016":"The extruder is not extruding normally; please refer to the HMS. After trouble shooting, if the defects are acceptable, please resume printing.","12FF_4001":"Filament is still loaded from the AMS when it has been disabled. Please unload AMS filament, load from spool holder, and restart print job.","12FF_8001":"Failed to cut the filament. Please check the cutter.","12FF_8002":"The cutter is stuck. Please pull out the cutter handle.","12FF_8003":"Please pull out the filament on the spool holder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube if you are about to us...","12FF_8004":"Failed to pull back the filament from the toolhead. Please check whether the filament is stuck.","12FF_8005":"The filament is not inserted. Please insert the filament.","12FF_8006":"Please feed filament into the PTFE tube until it can not be pushed any farther.","12FF_8007":"Check nozzle. Select 'Done' if filament was extruded, otherwise push filament forward slightly and select 'Retry.'","12FF_8010":"Please check if the filament or the spool is stuck.","12FF_8011":"AMS filament has run out. Please insert a new filament into the same AMS slot.","12FF_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","12FF_8013":"Timeout while purging old filament. Please check if the filament is stuck or the extruder clogged.","12FF_C003":"Please pull out the filament on the spool holder. If this message persists, please check to see if there is filament broken in the extruder or PTFE Tube. (Connect a PTFE tube if you are about to us...","12FF_C006":"Please feed filament into the PTFE tube until it can not be pushed any farther.","1800_4025":"Failed to read the filament information.","1800_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1800_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1800_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1800_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1800_8007":"Extruding filament failed. The extruder might be clogged.","1800_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT A to the extruder is properly connected.","1800_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1800_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1800_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1800_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1800_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1800_8017":"AMS-HT A is drying. Please stop drying process before loading/unloading material.","1800_8021":"AMS setup failed; please refer to the assistant.","1800_8023":"AMS-HT A cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1800_C069":"An error occurred during AMS-HT A drying. Please go to Assistant for more details.","1800_C06A":"AMS-HT A is reading RFID. Unable to start drying. Please try again later.","1800_C06B":"AMS-HT A is changing filament. Unable to start drying. Please try again later.","1800_C06C":"AMS-HT A is in Feed Assist Mode. Unable to start drying. Please try again later.","1800_C06D":"AMS-HT A is assisting in filament insertion. Unable to start drying. Please try again later.","1800_C06E":"AMS-HT A motor is performing self-test. Unable to start drying. Please try again later.","1801_4025":"Failed to read the filament information.","1801_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1801_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1801_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1801_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1801_8007":"Extruding filament failed. The extruder might be clogged.","1801_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT B to the extruder is properly connected.","1801_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1801_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1801_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1801_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1801_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1801_8017":"AMS-HT B is drying. Please stop drying process before loading/unloading material.","1801_8021":"AMS setup failed; please refer to the assistant.","1801_8023":"AMS-HT B cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1801_C069":"An error occurred during AMS-HT B drying. Please go to Assistant for more details.","1801_C06A":"AMS-HT B is reading RFID. Unable to start drying. Please try again later.","1801_C06B":"AMS-HT B is changing filament. Unable to start drying. Please try again later.","1801_C06C":"AMS-HT B is in Feed Assist Mode. Unable to start drying. Please try again later.","1801_C06D":"AMS-HT B is assisting in filament insertion. Unable to start drying. Please try again later.","1801_C06E":"AMS-HT B motor is performing self-test. Unable to start drying. Please try again later.","1802_4025":"Failed to read the filament information.","1802_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1802_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1802_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1802_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1802_8007":"Extruding filament failed. The extruder might be clogged.","1802_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT C to the extruder is properly connected.","1802_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1802_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1802_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1802_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1802_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1802_8017":"AMS-HT C is drying. Please stop drying process before loading/unloading material.","1802_8021":"AMS setup failed; please refer to the assistant.","1802_8023":"AMS-HT C cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1802_C069":"An error occurred during AMS-HT C drying. Please go to Assistant for more details.","1802_C06A":"AMS-HT C is reading RFID. Unable to start drying. Please try again later.","1802_C06B":"AMS-HT C is changing filament. Unable to start drying. Please try again later.","1802_C06C":"AMS-HT C is in Feed Assist Mode. Unable to start drying. Please try again later.","1802_C06D":"AMS-HT C is assisting in filament insertion. Unable to start drying. Please try again later.","1802_C06E":"AMS-HT C motor is performing self-test. Unable to start drying. Please try again later.","1803_4025":"Failed to read the filament information.","1803_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1803_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1803_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1803_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1803_8007":"Extruding filament failed. The extruder might be clogged.","1803_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT D to the extruder is properly connected.","1803_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1803_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1803_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1803_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1803_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1803_8017":"AMS-HT D is drying. Please stop drying process before loading/unloading material.","1803_8021":"AMS setup failed; please refer to the assistant.","1803_8023":"AMS-HT D cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1803_C069":"An error occurred during AMS-HT D drying. Please go to Assistant for more details.","1803_C06A":"AMS-HT D is reading RFID. Unable to start drying. Please try again later.","1803_C06B":"AMS-HT D is changing filament. Unable to start drying. Please try again later.","1803_C06C":"AMS-HT D is in Feed Assist Mode. Unable to start drying. Please try again later.","1803_C06D":"AMS-HT D is assisting in filament insertion. Unable to start drying. Please try again later.","1803_C06E":"AMS-HT D motor is performing self-test. Unable to start drying. Please try again later.","1804_4025":"Failed to read the filament information.","1804_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1804_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1804_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1804_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1804_8007":"Extruding filament failed. The extruder might be clogged.","1804_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT E to the extruder is properly connected.","1804_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1804_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1804_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1804_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1804_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1804_8021":"AMS setup failed; please refer to the assistant.","1804_8023":"AMS-HT E cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1804_C069":"An error occurred during AMS-HT E drying. Please go to Assistant for more details.","1804_C06A":"AMS-HT E is reading RFID. Unable to start drying. Please try again later.","1804_C06B":"AMS-HT E is changing filament. Unable to start drying. Please try again later.","1804_C06C":"AMS-HT E is in Feed Assist Mode. Unable to start drying. Please try again later.","1804_C06D":"AMS-HT E is assisting in filament insertion. Unable to start drying. Please try again later.","1804_C06E":"AMS-HT E motor is performing self-test. Unable to start drying. Please try again later.","1805_4025":"Failed to read the filament information.","1805_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1805_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1805_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1805_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1805_8007":"Extruding filament failed. The extruder might be clogged.","1805_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT F to the extruder is properly connected.","1805_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1805_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1805_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1805_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1805_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1805_8021":"AMS setup failed; please refer to the assistant.","1805_8023":"AMS-HT F cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1805_C069":"An error occurred during AMS-HT F drying. Please go to Assistant for more details.","1805_C06A":"AMS-HT F is reading RFID. Unable to start drying. Please try again later.","1805_C06B":"AMS-HT F is changing filament. Unable to start drying. Please try again later.","1805_C06C":"AMS-HT F is in Feed Assist Mode. Unable to start drying. Please try again later.","1805_C06D":"AMS-HT F is assisting in filament insertion. Unable to start drying. Please try again later.","1805_C06E":"AMS-HT F motor is performing self-test. Unable to start drying. Please try again later.","1806_4025":"Failed to read the filament information.","1806_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1806_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1806_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1806_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1806_8007":"Extruding filament failed. The extruder might be clogged.","1806_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT G to the extruder is properly connected.","1806_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1806_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1806_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1806_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1806_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1806_8021":"AMS setup failed; please refer to the assistant.","1806_8023":"AMS-HT G cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1806_C069":"An error occurred during AMS-HT G drying. Please go to Assistant for more details.","1806_C06A":"AMS-HT G is reading RFID. Unable to start drying. Please try again later.","1806_C06B":"AMS-HT G is changing filament. Unable to start drying. Please try again later.","1806_C06C":"AMS-HT G is in Feed Assist Mode. Unable to start drying. Please try again later.","1806_C06D":"AMS-HT G is assisting in filament insertion. Unable to start drying. Please try again later.","1806_C06E":"AMS-HT G motor is performing self-test. Unable to start drying. Please try again later.","1807_4025":"Failed to read the filament information.","1807_8003":"Failed to pull out the filament from the extruder. This might be caused by clogged extruder or filament broken inside the extruder.","1807_8004":"AMS-HT failed to pull back filament. This could be due to a stuck spool or the end of the filament being stuck in the path.","1807_8005":"The AMS-HT failed to send out filament. You can clip the end of your filament flat, and reinsert. If this message persists, please check the PTFE tubes in AMS for any signs of wear and tear.","1807_8006":"Unable to feed filament into the extruder. The AMS may be mismatched with the extruder. You can rerun the AMS Setup. This could also be due to an entangled filament or a stuck spool. If not, please...","1807_8007":"Extruding filament failed. The extruder might be clogged.","1807_800A":"PTFE tube disconnection detected. Please check if the PTFE tube from AMS-HT H to the extruder is properly connected.","1807_8010":"The AMS-HT assist motor is overloaded. This could be due to entangled filament or a stuck spool.","1807_8011":"AMS-HT filament ran out. Please insert a new filament into the same AMS-HT slot.","1807_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","1807_8013":"Timeout purging old filament: Please check if the filament is stuck or the extruder is clogged.","1807_8016":"The extruder is not extruding normally; please refer to the Assistant. After trouble shooting. If the defects are acceptable, please resume.","1807_8021":"AMS setup failed; please refer to the assistant.","1807_8023":"AMS-HT H cooling failed. The ambient temperature may be too high. Please operate the device in a suitable environment.","1807_C069":"An error occurred during AMS-HT H drying. Please go to Assistant for more details.","1807_C06A":"AMS-HT H is reading RFID. Unable to start drying. Please try again later.","1807_C06B":"AMS-HT H is changing filament. Unable to start drying. Please try again later.","1807_C06C":"AMS-HT H is in Feed Assist Mode. Unable to start drying. Please try again later.","1807_C06D":"AMS-HT H is assisting in filament insertion. Unable to start drying. Please try again later.","1807_C06E":"AMS-HT H motor is performing self-test. Unable to start drying. Please try again later.","18FE_8001":"Failed to cut the filament of the left extruder. Please check the cutter.","18FE_8002":"The cutter of the left extruder is stuck. Please pull out the cutter handle.","18FE_8003":"Please pull out the filament on the spool holder  of the left extruder. If this message persists, please check to see if there is filament broken in the extruder. (Connect a PTFE tube if you are ab...","18FE_8004":"Failed to pull back the filament from the left extruder. Please check whether the filament is stuck inside the extruder.","18FE_8005":"Failed to feed the filament outside the AMS-HT. Please clip the end of the filament flat and check to see if the spool is stuck.","18FE_8006":"Please feed filament into the PTFE tube of the left extruder until it can not be pushed any farther.","18FE_8007":"Please observe the nozzle of the left extruder. If the filament has been extruded, select 'Continue'; if it has not, please push the filament forward slightly, and then select 'Retry'.","18FE_8011":"The external filament connected to the left extruder has run out; please load a new filament.","18FE_8012":"Failed to get mapping table; please select 'Resume' to retry.","18FE_8013":"Timeout purging old filament of the left extruder: Please check if the filament is stuck or the extruder is clogged.","18FE_8020":"Extruder change failed; please refer to the assistant.","18FE_8021":"AMS setup failed; please refer to the assistant.","18FE_8024":"Extruder position calibration failed; please refer to the assistant.","18FE_C003":"Please pull out the filament on the spool holder of the left extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube i...","18FE_C006":"Please feed filament into the PTFE tube of the left extruder until it can not be pushed any farther.","18FE_C008":"Please pull out the filament on the spool holder of the left extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube i...","18FE_C009":"Please feed filament into the PTFE tube of the left extruder until it can not be pushed any farther.","18FE_C00A":"Please observe the nozzle of the left extruder. If the filament has been extruded, select 'Continue'; if not, please push the filament forward slightly and then select 'Retry'.","18FF_8001":"Failed to cut the filament of the right extruder. Please check the cutter.","18FF_8002":"The cutter of the right extruder is stuck. Please pull out the cutter handle.","18FF_8003":"Please pull out the filament on the spool holder  of the right extruder. If this message persists, please check to see if there is filament broken in the extruder. (Connect a PTFE tube if you are a...","18FF_8004":"Failed to pull back the filament from the right extruder. Please check whether the filament is stuck inside the extruder.","18FF_8005":"Failed to feed the filament outside the AMS-HT. Please clip the end of the filament flat and check to see if the spool is stuck.","18FF_8006":"Please feed filament into the PTFE tube of the right extruder until it can not be pushed any farther.","18FF_8007":"Please observe the nozzle of the right extruder. If the filament has been extruded, select 'Continue'; if it has not, please push the filament forward slightly, and then select 'Retry'.","18FF_8011":"The external filament connected to the right extruder has run out; please load a new filament.","18FF_8012":"Failed to get AMS mapping table; please select 'Resume' to retry.","18FF_8013":"Timeout purging old filament of the right extruder: Please check if the filament is stuck or the extruder is clogged.","18FF_8020":"Extruder change failed; please refer to the assistant.","18FF_8021":"AMS setup failed; please refer to the assistant.","18FF_8024":"Extruder position calibration failed; please refer to the assistant.","18FF_C003":"Please pull out the filament on the spool holder of the right extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube ...","18FF_C006":"Please feed filament into the PTFE tube of the right extruder until it can not be pushed any farther.","18FF_C008":"Please pull out the filament on the spool holder of the right extruder. If this message persists, please check to see if there is filament broken in the extruder or PTFE tube. (Connect a PTFE tube ...","18FF_C009":"Please feed filament into the PTFE tube of the right extruder until it can not be pushed any farther.","18FF_C00A":"Please observe the nozzle of the right extruder. If the filament has been extruded, select 'Continue'; if not, please push the filament forward slightly and then select 'Retry'."};function bve(t){switch(t){case 1:return{label:"Fatal",color:"text-red-500",bgColor:"bg-red-500/20",Icon:Cn};case 2:return{label:"Serious",color:"text-red-400",bgColor:"bg-red-500/15",Icon:Cn};case 3:return{label:"Warning",color:"text-orange-400",bgColor:"bg-orange-500/20",Icon:Oa};default:return{label:"Info",color:"text-blue-400",bgColor:"bg-blue-500/20",Icon:Cs}}}function MF(t,e){const n=t>>16&65535||(t>>8&255)<<8|t&255,r=e&65535;return`${n.toString(16).padStart(4,"0").toUpperCase()}_${r.toString(16).padStart(4,"0").toUpperCase()}`}function cm(t){return t.filter(e=>{const n=parseInt(e.code.replace("0x",""),16)||0,r=MF(e.attr,n);return jF[r]!==void 0})}function xve(){return"https://wiki.bambulab.com/en/hms/home"}function yve({printerName:t,errors:e,onClose:n,printerId:r,hasPermission:i}){const{t:s}=_t(),{showToast:o}=rn(),l=ot({mutationFn:()=>oe.clearHMSErrors(r),onSuccess:()=>{o(s("hmsErrors.clearSuccess"),"success"),n()},onError:()=>{o(s("hmsErrors.clearFailed"),"error")}}),c=e.filter(d=>{const u=parseInt(d.code.replace("0x",""),16)||0,m=MF(d.attr,u);return jF[m]!==void 0});return w.useEffect(()=>{const d=u=>{u.key==="Escape"&&n()};return window.addEventListener("keydown",d),()=>window.removeEventListener("keydown",d)},[n]),a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4",children:a.jsxs("div",{className:"bg-bambu-dark-secondary rounded-lg shadow-xl max-w-lg w-full max-h-[80vh] flex flex-col",children:[a.jsxs("div",{className:"flex items-center justify-between p-4 border-b border-bambu-dark-tertiary",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(Cn,{className:"w-5 h-5 text-orange-400"}),a.jsx("h2",{className:"text-lg font-semibold text-white",children:s("hmsErrors.title",{name:t})})]}),a.jsx("button",{onClick:n,className:"p-1 hover:bg-bambu-dark-tertiary rounded-lg transition-colors",children:a.jsx(Bt,{className:"w-5 h-5 text-bambu-gray"})})]}),a.jsx("div",{className:"flex-1 overflow-y-auto p-4",children:c.length===0?a.jsxs("div",{className:"text-center py-8 text-bambu-gray",children:[a.jsx(Oa,{className:"w-12 h-12 mx-auto mb-3 opacity-30"}),a.jsx("p",{children:s("hmsErrors.noErrors")})]}):a.jsx("div",{className:"space-y-3",children:c.map((d,u)=>{const{label:m,color:p,bgColor:f,Icon:x}=bve(d.severity),v=parseInt(d.code.replace("0x",""),16)||0,b=MF(d.attr,v),g=jF[b],S=xve(),N=b.replace("_","-");return a.jsx("div",{className:`p-4 rounded-lg ${f} border border-white/10`,children:a.jsxs("div",{className:"flex items-start gap-3",children:[a.jsx(x,{className:`w-5 h-5 ${p} flex-shrink-0 mt-0.5`}),a.jsxs("div",{className:"flex-1 min-w-0",children:[a.jsxs("div",{className:"flex items-center gap-2 mb-1",children:[a.jsxs("span",{className:`font-mono text-sm ${p}`,children:["[",N,"]"]}),a.jsx("span",{className:`text-xs px-2 py-0.5 rounded-full ${f} ${p}`,children:m})]}),a.jsx("p",{className:"text-sm text-bambu-gray mb-2",children:g}),a.jsxs("a",{href:S,target:"_blank",rel:"noopener noreferrer",className:"inline-flex items-center gap-1 text-xs text-bambu-green hover:underline",children:[a.jsx(Ar,{className:"w-3 h-3"}),s("hmsErrors.viewOnWiki")]})]})]})},`${d.code}-${u}`)})})}),a.jsxs("div",{className:"p-4 border-t border-bambu-dark-tertiary flex items-center justify-between gap-3",children:[a.jsx("p",{className:"text-xs text-bambu-gray",children:s("hmsErrors.clearInstructions")}),c.length>0&&a.jsxs("button",{onClick:()=>l.mutate(),disabled:!i("printers:control")||l.isPending,className:"flex items-center gap-1.5 px-3 py-1.5 text-sm font-medium rounded-lg bg-red-500/20 text-red-400 hover:bg-red-500/30 transition-colors disabled:opacity-50 disabled:cursor-not-allowed flex-shrink-0",children:[l.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Zt,{className:"w-4 h-4"}),s("hmsErrors.clearErrors")]})]})]})})}const vve=[{key:"printing",dot:"bg-bambu-green"},{key:"paused",dot:"bg-status-warning"},{key:"finished",dot:"bg-blue-400"},{key:"idle",dot:"bg-bambu-green"},{key:"error",dot:"bg-status-error"},{key:"offline",dot:"bg-gray-400"}];function wve({selectedIds:t,printers:e,onClose:n,onSelectAll:r,onSelectByLocation:i,onSelectByState:s,onAction:o,actionPending:l}){const{t:c}=_t(),{hasPermission:d}=gr(),u=tn(),[m,p]=w.useState(!1),[f,x]=w.useState(!1),v=Array.from(t).map(E=>({id:E,status:u.getQueryData(["printerStatus",E])})),b=v.some(({status:E})=>E?.connected&&E.state==="RUNNING"),g=v.some(({status:E})=>E?.connected&&E.state==="PAUSE"),S=b||g,N=v.some(({status:E})=>!!(E?.connected&&E.awaiting_plate_clear)),P=v.some(({status:E})=>!E?.connected||!E.hms_errors?!1:cm(E.hms_errors).length>0),C=d("printers:control"),A=d("printers:clear_plate"),T=[...new Set(e.map(E=>E.location).filter(E=>!!E))].sort(),F={printing:0,paused:0,finished:0,idle:0,error:0,offline:0};e.forEach(E=>{const $=u.getQueryData(["printerStatus",E.id]);if(!$||!$.connected){F.offline++;return}const z=$.hms_errors?cm($.hms_errors).length>0:!1;switch(z&&F.error++,$.state){case"RUNNING":F.printing++;break;case"PAUSE":F.paused++;break;case"FINISH":F.finished++;break;case"FAILED":z||F.finished++;break;default:F.idle++;break}});const k={printing:c("printers.status.printing"),paused:c("printers.status.paused","Paused"),finished:c("printers.status.finished","Finished"),idle:c("printers.status.idle"),error:c("printers.status.problem"),offline:c("printers.status.offline")};return a.jsxs("div",{className:"fixed bottom-6 left-1/2 -translate-x-1/2 z-40 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl px-4 py-3 flex items-center gap-3 flex-wrap",children:[a.jsx(De,{variant:"secondary",size:"sm",onClick:n,children:a.jsx(Bt,{className:"w-4 h-4"})}),a.jsx("div",{className:"w-px h-6 bg-bambu-dark-tertiary"}),a.jsx("span",{className:"text-white font-medium text-sm",children:c("printers.bulk.selected",{count:t.size})}),a.jsx("div",{className:"w-px h-6 bg-bambu-dark-tertiary"}),a.jsx(De,{variant:"secondary",size:"sm",onClick:r,children:c("printers.bulk.selectAll")}),a.jsxs("div",{className:"relative",children:[a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>{x(!f),p(!1)},children:[c("printers.bulk.selectByState"),a.jsx(zn,{className:`w-3 h-3 transition-transform ${f?"rotate-180":""}`})]}),f&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-10",onClick:()=>x(!1)}),a.jsx("div",{className:"absolute bottom-full mb-2 left-0 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg z-20 py-1",children:vve.filter(({key:E})=>F[E]>0).map(({key:E,dot:$})=>a.jsxs("button",{onClick:()=>{s(E),x(!1)},className:"w-full text-left px-3 py-2 text-sm text-bambu-gray-light hover:bg-bambu-dark-tertiary hover:text-white transition-colors flex items-center gap-2",children:[a.jsx("div",{className:`w-2 h-2 rounded-full ${$}`}),k[E],a.jsx("span",{className:"ml-auto text-bambu-gray text-xs",children:F[E]})]},E))})]})]}),T.length>0&&a.jsxs("div",{className:"relative",children:[a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>{p(!m),x(!1)},children:[c("printers.bulk.selectByLocation"),a.jsx(zn,{className:`w-3 h-3 transition-transform ${m?"rotate-180":""}`})]}),m&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-10",onClick:()=>p(!1)}),a.jsx("div",{className:"absolute bottom-full mb-2 left-0 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg z-20 py-1",children:T.map(E=>a.jsx("button",{onClick:()=>{i(E),p(!1)},className:"w-full text-left px-3 py-2 text-sm text-bambu-gray-light hover:bg-bambu-dark-tertiary hover:text-white transition-colors",children:E},E))})]})]}),a.jsx("div",{className:"w-px h-6 bg-bambu-dark-tertiary"}),a.jsxs(De,{size:"sm",className:"bg-red-500 hover:bg-red-600",onClick:()=>o("stop"),disabled:l||!C||!S,title:C?S?void 0:c("printers.bulk.noneApplicable"):c("printers.permission.noControl"),children:[a.jsx(mo,{className:"w-3.5 h-3.5"}),c("printers.bulk.actions.stop")]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>o("pause"),disabled:l||!C||!b,title:C?b?void 0:c("printers.bulk.noneApplicable"):c("printers.permission.noControl"),children:[a.jsx(cS,{className:"w-3.5 h-3.5"}),c("printers.bulk.actions.pause")]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>o("resume"),disabled:l||!C||!g,title:C?g?void 0:c("printers.bulk.noneApplicable"):c("printers.permission.noControl"),children:[a.jsx(rs,{className:"w-3.5 h-3.5"}),c("printers.bulk.actions.resume")]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>o("clearHMS"),disabled:l||!C||!P,title:C?P?void 0:c("printers.bulk.noneApplicable"):c("printers.permission.noControl"),children:[a.jsx(nfe,{className:"w-3.5 h-3.5"}),c("printers.bulk.actions.clearHMS")]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>o("clearPlate"),disabled:l||!A||!N,title:A?N?void 0:c("printers.bulk.noneApplicable"):c("printers.permission.noControl"),children:[a.jsx(kge,{className:"w-3.5 h-3.5"}),c("printers.bulk.actions.clearPlate")]})]})}const lO="181",Ix={ROTATE:0,DOLLY:1,PAN:2},Tx={ROTATE:0,PAN:1,DOLLY_PAN:2,DOLLY_ROTATE:3},Sve=0,s6=1,_ve=2,MJ=1,kve=2,Uu=3,_p=0,Lo=1,Td=2,dm=0,Ox=1,o6=2,l6=3,c6=4,Nve=5,Df=100,Cve=101,Pve=102,Tve=103,Ave=104,jve=200,Mve=201,Eve=202,Dve=203,EF=204,DF=205,Fve=206,Rve=207,Lve=208,Ive=209,Ove=210,zve=211,Uve=212,Bve=213,Hve=214,FF=0,RF=1,LF=2,Jx=3,IF=4,OF=5,zF=6,UF=7,cO=0,qve=1,$ve=2,up=0,Vve=1,Gve=2,Wve=3,Kve=4,Xve=5,Yve=6,Qve=7,EJ=300,Zx=301,ey=302,BF=303,HF=304,aT=306,qF=1e3,em=1001,$F=1002,cl=1003,Jve=1004,a1=1005,Zl=1006,BM=1007,Uf=1008,$d=1009,DJ=1010,FJ=1011,hw=1012,dO=1013,wg=1014,tm=1015,Ay=1016,uO=1017,mO=1018,pw=1020,RJ=35902,LJ=35899,IJ=1021,OJ=1022,Hc=1023,fw=1026,gw=1027,zJ=1028,hO=1029,pO=1030,fO=1031,gO=1033,Wk=33776,Kk=33777,Xk=33778,Yk=33779,VF=35840,GF=35841,WF=35842,KF=35843,XF=36196,YF=37492,QF=37496,JF=37808,ZF=37809,eR=37810,tR=37811,nR=37812,rR=37813,aR=37814,iR=37815,sR=37816,oR=37817,lR=37818,cR=37819,dR=37820,uR=37821,mR=36492,hR=36494,pR=36495,fR=36283,gR=36284,bR=36285,xR=36286,Zve=3200,e0e=3201,UJ=0,t0e=1,Bh="",al="srgb",ty="srgb-linear",IN="linear",Zr="srgb",Eb=7680,d6=519,n0e=512,r0e=513,a0e=514,BJ=515,i0e=516,s0e=517,o0e=518,l0e=519,u6=35044,m6="300 es",Ed=2e3,ON=2001;function HJ(t){for(let e=t.length-1;e>=0;--e)if(t[e]>=65535)return!0;return!1}function zN(t){return document.createElementNS("http://www.w3.org/1999/xhtml",t)}function c0e(){const t=zN("canvas");return t.style.display="block",t}const h6={};function p6(...t){const e="THREE."+t.shift();console.log(e,...t)}function Hn(...t){const e="THREE."+t.shift();console.warn(e,...t)}function si(...t){const e="THREE."+t.shift();console.error(e,...t)}function bw(...t){const e=t.join(" ");e in h6||(h6[e]=!0,Hn(...t))}function d0e(t,e,n){return new Promise(function(r,i){function s(){switch(t.clientWaitSync(e,t.SYNC_FLUSH_COMMANDS_BIT,0)){case t.WAIT_FAILED:i();break;case t.TIMEOUT_EXPIRED:setTimeout(s,n);break;default:r()}}setTimeout(s,n)})}let Wg=class{addEventListener(e,n){this._listeners===void 0&&(this._listeners={});const r=this._listeners;r[e]===void 0&&(r[e]=[]),r[e].indexOf(n)===-1&&r[e].push(n)}hasEventListener(e,n){const r=this._listeners;return r===void 0?!1:r[e]!==void 0&&r[e].indexOf(n)!==-1}removeEventListener(e,n){const r=this._listeners;if(r===void 0)return;const i=r[e];if(i!==void 0){const s=i.indexOf(n);s!==-1&&i.splice(s,1)}}dispatchEvent(e){const n=this._listeners;if(n===void 0)return;const r=n[e.type];if(r!==void 0){e.target=this;const i=r.slice(0);for(let s=0,o=i.length;s<o;s++)i[s].call(this,e);e.target=null}}};const Fs=["00","01","02","03","04","05","06","07","08","09","0a","0b","0c","0d","0e","0f","10","11","12","13","14","15","16","17","18","19","1a","1b","1c","1d","1e","1f","20","21","22","23","24","25","26","27","28","29","2a","2b","2c","2d","2e","2f","30","31","32","33","34","35","36","37","38","39","3a","3b","3c","3d","3e","3f","40","41","42","43","44","45","46","47","48","49","4a","4b","4c","4d","4e","4f","50","51","52","53","54","55","56","57","58","59","5a","5b","5c","5d","5e","5f","60","61","62","63","64","65","66","67","68","69","6a","6b","6c","6d","6e","6f","70","71","72","73","74","75","76","77","78","79","7a","7b","7c","7d","7e","7f","80","81","82","83","84","85","86","87","88","89","8a","8b","8c","8d","8e","8f","90","91","92","93","94","95","96","97","98","99","9a","9b","9c","9d","9e","9f","a0","a1","a2","a3","a4","a5","a6","a7","a8","a9","aa","ab","ac","ad","ae","af","b0","b1","b2","b3","b4","b5","b6","b7","b8","b9","ba","bb","bc","bd","be","bf","c0","c1","c2","c3","c4","c5","c6","c7","c8","c9","ca","cb","cc","cd","ce","cf","d0","d1","d2","d3","d4","d5","d6","d7","d8","d9","da","db","dc","dd","de","df","e0","e1","e2","e3","e4","e5","e6","e7","e8","e9","ea","eb","ec","ed","ee","ef","f0","f1","f2","f3","f4","f5","f6","f7","f8","f9","fa","fb","fc","fd","fe","ff"],Qk=Math.PI/180,yR=180/Math.PI;function pS(){const t=Math.random()*4294967295|0,e=Math.random()*4294967295|0,n=Math.random()*4294967295|0,r=Math.random()*4294967295|0;return(Fs[t&255]+Fs[t>>8&255]+Fs[t>>16&255]+Fs[t>>24&255]+"-"+Fs[e&255]+Fs[e>>8&255]+"-"+Fs[e>>16&15|64]+Fs[e>>24&255]+"-"+Fs[n&63|128]+Fs[n>>8&255]+"-"+Fs[n>>16&255]+Fs[n>>24&255]+Fs[r&255]+Fs[r>>8&255]+Fs[r>>16&255]+Fs[r>>24&255]).toLowerCase()}function fr(t,e,n){return Math.max(e,Math.min(n,t))}function u0e(t,e){return(t%e+e)%e}function HM(t,e,n){return(1-n)*t+n*e}function Lv(t,e){switch(e.constructor){case Float32Array:return t;case Uint32Array:return t/4294967295;case Uint16Array:return t/65535;case Uint8Array:return t/255;case Int32Array:return Math.max(t/2147483647,-1);case Int16Array:return Math.max(t/32767,-1);case Int8Array:return Math.max(t/127,-1);default:throw new Error("Invalid component type.")}}function Ao(t,e){switch(e.constructor){case Float32Array:return t;case Uint32Array:return Math.round(t*4294967295);case Uint16Array:return Math.round(t*65535);case Uint8Array:return Math.round(t*255);case Int32Array:return Math.round(t*2147483647);case Int16Array:return Math.round(t*32767);case Int8Array:return Math.round(t*127);default:throw new Error("Invalid component type.")}}const m0e={DEG2RAD:Qk};let tr=class qJ{constructor(e=0,n=0){qJ.prototype.isVector2=!0,this.x=e,this.y=n}get width(){return this.x}set width(e){this.x=e}get height(){return this.y}set height(e){this.y=e}set(e,n){return this.x=e,this.y=n,this}setScalar(e){return this.x=e,this.y=e,this}setX(e){return this.x=e,this}setY(e){return this.y=e,this}setComponent(e,n){switch(e){case 0:this.x=n;break;case 1:this.y=n;break;default:throw new Error("index is out of range: "+e)}return this}getComponent(e){switch(e){case 0:return this.x;case 1:return this.y;default:throw new Error("index is out of range: "+e)}}clone(){return new this.constructor(this.x,this.y)}copy(e){return this.x=e.x,this.y=e.y,this}add(e){return this.x+=e.x,this.y+=e.y,this}addScalar(e){return this.x+=e,this.y+=e,this}addVectors(e,n){return this.x=e.x+n.x,this.y=e.y+n.y,this}addScaledVector(e,n){return this.x+=e.x*n,this.y+=e.y*n,this}sub(e){return this.x-=e.x,this.y-=e.y,this}subScalar(e){return this.x-=e,this.y-=e,this}subVectors(e,n){return this.x=e.x-n.x,this.y=e.y-n.y,this}multiply(e){return this.x*=e.x,this.y*=e.y,this}multiplyScalar(e){return this.x*=e,this.y*=e,this}divide(e){return this.x/=e.x,this.y/=e.y,this}divideScalar(e){return this.multiplyScalar(1/e)}applyMatrix3(e){const n=this.x,r=this.y,i=e.elements;return this.x=i[0]*n+i[3]*r+i[6],this.y=i[1]*n+i[4]*r+i[7],this}min(e){return this.x=Math.min(this.x,e.x),this.y=Math.min(this.y,e.y),this}max(e){return this.x=Math.max(this.x,e.x),this.y=Math.max(this.y,e.y),this}clamp(e,n){return this.x=fr(this.x,e.x,n.x),this.y=fr(this.y,e.y,n.y),this}clampScalar(e,n){return this.x=fr(this.x,e,n),this.y=fr(this.y,e,n),this}clampLength(e,n){const r=this.length();return this.divideScalar(r||1).multiplyScalar(fr(r,e,n))}floor(){return this.x=Math.floor(this.x),this.y=Math.floor(this.y),this}ceil(){return this.x=Math.ceil(this.x),this.y=Math.ceil(this.y),this}round(){return this.x=Math.round(this.x),this.y=Math.round(this.y),this}roundToZero(){return this.x=Math.trunc(this.x),this.y=Math.trunc(this.y),this}negate(){return this.x=-this.x,this.y=-this.y,this}dot(e){return this.x*e.x+this.y*e.y}cross(e){return this.x*e.y-this.y*e.x}lengthSq(){return this.x*this.x+this.y*this.y}length(){return Math.sqrt(this.x*this.x+this.y*this.y)}manhattanLength(){return Math.abs(this.x)+Math.abs(this.y)}normalize(){return this.divideScalar(this.length()||1)}angle(){return Math.atan2(-this.y,-this.x)+Math.PI}angleTo(e){const n=Math.sqrt(this.lengthSq()*e.lengthSq());if(n===0)return Math.PI/2;const r=this.dot(e)/n;return Math.acos(fr(r,-1,1))}distanceTo(e){return Math.sqrt(this.distanceToSquared(e))}distanceToSquared(e){const n=this.x-e.x,r=this.y-e.y;return n*n+r*r}manhattanDistanceTo(e){return Math.abs(this.x-e.x)+Math.abs(this.y-e.y)}setLength(e){return this.normalize().multiplyScalar(e)}lerp(e,n){return this.x+=(e.x-this.x)*n,this.y+=(e.y-this.y)*n,this}lerpVectors(e,n,r){return this.x=e.x+(n.x-e.x)*r,this.y=e.y+(n.y-e.y)*r,this}equals(e){return e.x===this.x&&e.y===this.y}fromArray(e,n=0){return this.x=e[n],this.y=e[n+1],this}toArray(e=[],n=0){return e[n]=this.x,e[n+1]=this.y,e}fromBufferAttribute(e,n){return this.x=e.getX(n),this.y=e.getY(n),this}rotateAround(e,n){const r=Math.cos(n),i=Math.sin(n),s=this.x-e.x,o=this.y-e.y;return this.x=s*r-o*i+e.x,this.y=s*i+o*r+e.y,this}random(){return this.x=Math.random(),this.y=Math.random(),this}*[Symbol.iterator](){yield this.x,yield this.y}},Sg=class{constructor(e=0,n=0,r=0,i=1){this.isQuaternion=!0,this._x=e,this._y=n,this._z=r,this._w=i}static slerpFlat(e,n,r,i,s,o,l){let c=r[i+0],d=r[i+1],u=r[i+2],m=r[i+3],p=s[o+0],f=s[o+1],x=s[o+2],v=s[o+3];if(l<=0){e[n+0]=c,e[n+1]=d,e[n+2]=u,e[n+3]=m;return}if(l>=1){e[n+0]=p,e[n+1]=f,e[n+2]=x,e[n+3]=v;return}if(m!==v||c!==p||d!==f||u!==x){let b=c*p+d*f+u*x+m*v;b<0&&(p=-p,f=-f,x=-x,v=-v,b=-b);let g=1-l;if(b<.9995){const S=Math.acos(b),N=Math.sin(S);g=Math.sin(g*S)/N,l=Math.sin(l*S)/N,c=c*g+p*l,d=d*g+f*l,u=u*g+x*l,m=m*g+v*l}else{c=c*g+p*l,d=d*g+f*l,u=u*g+x*l,m=m*g+v*l;const S=1/Math.sqrt(c*c+d*d+u*u+m*m);c*=S,d*=S,u*=S,m*=S}}e[n]=c,e[n+1]=d,e[n+2]=u,e[n+3]=m}static multiplyQuaternionsFlat(e,n,r,i,s,o){const l=r[i],c=r[i+1],d=r[i+2],u=r[i+3],m=s[o],p=s[o+1],f=s[o+2],x=s[o+3];return e[n]=l*x+u*m+c*f-d*p,e[n+1]=c*x+u*p+d*m-l*f,e[n+2]=d*x+u*f+l*p-c*m,e[n+3]=u*x-l*m-c*p-d*f,e}get x(){return this._x}set x(e){this._x=e,this._onChangeCallback()}get y(){return this._y}set y(e){this._y=e,this._onChangeCallback()}get z(){return this._z}set z(e){this._z=e,this._onChangeCallback()}get w(){return this._w}set w(e){this._w=e,this._onChangeCallback()}set(e,n,r,i){return this._x=e,this._y=n,this._z=r,this._w=i,this._onChangeCallback(),this}clone(){return new this.constructor(this._x,this._y,this._z,this._w)}copy(e){return this._x=e.x,this._y=e.y,this._z=e.z,this._w=e.w,this._onChangeCallback(),this}setFromEuler(e,n=!0){const r=e._x,i=e._y,s=e._z,o=e._order,l=Math.cos,c=Math.sin,d=l(r/2),u=l(i/2),m=l(s/2),p=c(r/2),f=c(i/2),x=c(s/2);switch(o){case"XYZ":this._x=p*u*m+d*f*x,this._y=d*f*m-p*u*x,this._z=d*u*x+p*f*m,this._w=d*u*m-p*f*x;break;case"YXZ":this._x=p*u*m+d*f*x,this._y=d*f*m-p*u*x,this._z=d*u*x-p*f*m,this._w=d*u*m+p*f*x;break;case"ZXY":this._x=p*u*m-d*f*x,this._y=d*f*m+p*u*x,this._z=d*u*x+p*f*m,this._w=d*u*m-p*f*x;break;case"ZYX":this._x=p*u*m-d*f*x,this._y=d*f*m+p*u*x,this._z=d*u*x-p*f*m,this._w=d*u*m+p*f*x;break;case"YZX":this._x=p*u*m+d*f*x,this._y=d*f*m+p*u*x,this._z=d*u*x-p*f*m,this._w=d*u*m-p*f*x;break;case"XZY":this._x=p*u*m-d*f*x,this._y=d*f*m-p*u*x,this._z=d*u*x+p*f*m,this._w=d*u*m+p*f*x;break;default:Hn("Quaternion: .setFromEuler() encountered an unknown order: "+o)}return n===!0&&this._onChangeCallback(),this}setFromAxisAngle(e,n){const r=n/2,i=Math.sin(r);return this._x=e.x*i,this._y=e.y*i,this._z=e.z*i,this._w=Math.cos(r),this._onChangeCallback(),this}setFromRotationMatrix(e){const n=e.elements,r=n[0],i=n[4],s=n[8],o=n[1],l=n[5],c=n[9],d=n[2],u=n[6],m=n[10],p=r+l+m;if(p>0){const f=.5/Math.sqrt(p+1);this._w=.25/f,this._x=(u-c)*f,this._y=(s-d)*f,this._z=(o-i)*f}else if(r>l&&r>m){const f=2*Math.sqrt(1+r-l-m);this._w=(u-c)/f,this._x=.25*f,this._y=(i+o)/f,this._z=(s+d)/f}else if(l>m){const f=2*Math.sqrt(1+l-r-m);this._w=(s-d)/f,this._x=(i+o)/f,this._y=.25*f,this._z=(c+u)/f}else{const f=2*Math.sqrt(1+m-r-l);this._w=(o-i)/f,this._x=(s+d)/f,this._y=(c+u)/f,this._z=.25*f}return this._onChangeCallback(),this}setFromUnitVectors(e,n){let r=e.dot(n)+1;return r<1e-8?(r=0,Math.abs(e.x)>Math.abs(e.z)?(this._x=-e.y,this._y=e.x,this._z=0,this._w=r):(this._x=0,this._y=-e.z,this._z=e.y,this._w=r)):(this._x=e.y*n.z-e.z*n.y,this._y=e.z*n.x-e.x*n.z,this._z=e.x*n.y-e.y*n.x,this._w=r),this.normalize()}angleTo(e){return 2*Math.acos(Math.abs(fr(this.dot(e),-1,1)))}rotateTowards(e,n){const r=this.angleTo(e);if(r===0)return this;const i=Math.min(1,n/r);return this.slerp(e,i),this}identity(){return this.set(0,0,0,1)}invert(){return this.conjugate()}conjugate(){return this._x*=-1,this._y*=-1,this._z*=-1,this._onChangeCallback(),this}dot(e){return this._x*e._x+this._y*e._y+this._z*e._z+this._w*e._w}lengthSq(){return this._x*this._x+this._y*this._y+this._z*this._z+this._w*this._w}length(){return Math.sqrt(this._x*this._x+this._y*this._y+this._z*this._z+this._w*this._w)}normalize(){let e=this.length();return e===0?(this._x=0,this._y=0,this._z=0,this._w=1):(e=1/e,this._x=this._x*e,this._y=this._y*e,this._z=this._z*e,this._w=this._w*e),this._onChangeCallback(),this}multiply(e){return this.multiplyQuaternions(this,e)}premultiply(e){return this.multiplyQuaternions(e,this)}multiplyQuaternions(e,n){const r=e._x,i=e._y,s=e._z,o=e._w,l=n._x,c=n._y,d=n._z,u=n._w;return this._x=r*u+o*l+i*d-s*c,this._y=i*u+o*c+s*l-r*d,this._z=s*u+o*d+r*c-i*l,this._w=o*u-r*l-i*c-s*d,this._onChangeCallback(),this}slerp(e,n){if(n<=0)return this;if(n>=1)return this.copy(e);let r=e._x,i=e._y,s=e._z,o=e._w,l=this.dot(e);l<0&&(r=-r,i=-i,s=-s,o=-o,l=-l);let c=1-n;if(l<.9995){const d=Math.acos(l),u=Math.sin(d);c=Math.sin(c*d)/u,n=Math.sin(n*d)/u,this._x=this._x*c+r*n,this._y=this._y*c+i*n,this._z=this._z*c+s*n,this._w=this._w*c+o*n,this._onChangeCallback()}else this._x=this._x*c+r*n,this._y=this._y*c+i*n,this._z=this._z*c+s*n,this._w=this._w*c+o*n,this.normalize();return this}slerpQuaternions(e,n,r){return this.copy(e).slerp(n,r)}random(){const e=2*Math.PI*Math.random(),n=2*Math.PI*Math.random(),r=Math.random(),i=Math.sqrt(1-r),s=Math.sqrt(r);return this.set(i*Math.sin(e),i*Math.cos(e),s*Math.sin(n),s*Math.cos(n))}equals(e){return e._x===this._x&&e._y===this._y&&e._z===this._z&&e._w===this._w}fromArray(e,n=0){return this._x=e[n],this._y=e[n+1],this._z=e[n+2],this._w=e[n+3],this._onChangeCallback(),this}toArray(e=[],n=0){return e[n]=this._x,e[n+1]=this._y,e[n+2]=this._z,e[n+3]=this._w,e}fromBufferAttribute(e,n){return this._x=e.getX(n),this._y=e.getY(n),this._z=e.getZ(n),this._w=e.getW(n),this._onChangeCallback(),this}toJSON(){return this.toArray()}_onChange(e){return this._onChangeCallback=e,this}_onChangeCallback(){}*[Symbol.iterator](){yield this._x,yield this._y,yield this._z,yield this._w}},Nt=class $J{constructor(e=0,n=0,r=0){$J.prototype.isVector3=!0,this.x=e,this.y=n,this.z=r}set(e,n,r){return r===void 0&&(r=this.z),this.x=e,this.y=n,this.z=r,this}setScalar(e){return this.x=e,this.y=e,this.z=e,this}setX(e){return this.x=e,this}setY(e){return this.y=e,this}setZ(e){return this.z=e,this}setComponent(e,n){switch(e){case 0:this.x=n;break;case 1:this.y=n;break;case 2:this.z=n;break;default:throw new Error("index is out of range: "+e)}return this}getComponent(e){switch(e){case 0:return this.x;case 1:return this.y;case 2:return this.z;default:throw new Error("index is out of range: "+e)}}clone(){return new this.constructor(this.x,this.y,this.z)}copy(e){return this.x=e.x,this.y=e.y,this.z=e.z,this}add(e){return this.x+=e.x,this.y+=e.y,this.z+=e.z,this}addScalar(e){return this.x+=e,this.y+=e,this.z+=e,this}addVectors(e,n){return this.x=e.x+n.x,this.y=e.y+n.y,this.z=e.z+n.z,this}addScaledVector(e,n){return this.x+=e.x*n,this.y+=e.y*n,this.z+=e.z*n,this}sub(e){return this.x-=e.x,this.y-=e.y,this.z-=e.z,this}subScalar(e){return this.x-=e,this.y-=e,this.z-=e,this}subVectors(e,n){return this.x=e.x-n.x,this.y=e.y-n.y,this.z=e.z-n.z,this}multiply(e){return this.x*=e.x,this.y*=e.y,this.z*=e.z,this}multiplyScalar(e){return this.x*=e,this.y*=e,this.z*=e,this}multiplyVectors(e,n){return this.x=e.x*n.x,this.y=e.y*n.y,this.z=e.z*n.z,this}applyEuler(e){return this.applyQuaternion(f6.setFromEuler(e))}applyAxisAngle(e,n){return this.applyQuaternion(f6.setFromAxisAngle(e,n))}applyMatrix3(e){const n=this.x,r=this.y,i=this.z,s=e.elements;return this.x=s[0]*n+s[3]*r+s[6]*i,this.y=s[1]*n+s[4]*r+s[7]*i,this.z=s[2]*n+s[5]*r+s[8]*i,this}applyNormalMatrix(e){return this.applyMatrix3(e).normalize()}applyMatrix4(e){const n=this.x,r=this.y,i=this.z,s=e.elements,o=1/(s[3]*n+s[7]*r+s[11]*i+s[15]);return this.x=(s[0]*n+s[4]*r+s[8]*i+s[12])*o,this.y=(s[1]*n+s[5]*r+s[9]*i+s[13])*o,this.z=(s[2]*n+s[6]*r+s[10]*i+s[14])*o,this}applyQuaternion(e){const n=this.x,r=this.y,i=this.z,s=e.x,o=e.y,l=e.z,c=e.w,d=2*(o*i-l*r),u=2*(l*n-s*i),m=2*(s*r-o*n);return this.x=n+c*d+o*m-l*u,this.y=r+c*u+l*d-s*m,this.z=i+c*m+s*u-o*d,this}project(e){return this.applyMatrix4(e.matrixWorldInverse).applyMatrix4(e.projectionMatrix)}unproject(e){return this.applyMatrix4(e.projectionMatrixInverse).applyMatrix4(e.matrixWorld)}transformDirection(e){const n=this.x,r=this.y,i=this.z,s=e.elements;return this.x=s[0]*n+s[4]*r+s[8]*i,this.y=s[1]*n+s[5]*r+s[9]*i,this.z=s[2]*n+s[6]*r+s[10]*i,this.normalize()}divide(e){return this.x/=e.x,this.y/=e.y,this.z/=e.z,this}divideScalar(e){return this.multiplyScalar(1/e)}min(e){return this.x=Math.min(this.x,e.x),this.y=Math.min(this.y,e.y),this.z=Math.min(this.z,e.z),this}max(e){return this.x=Math.max(this.x,e.x),this.y=Math.max(this.y,e.y),this.z=Math.max(this.z,e.z),this}clamp(e,n){return this.x=fr(this.x,e.x,n.x),this.y=fr(this.y,e.y,n.y),this.z=fr(this.z,e.z,n.z),this}clampScalar(e,n){return this.x=fr(this.x,e,n),this.y=fr(this.y,e,n),this.z=fr(this.z,e,n),this}clampLength(e,n){const r=this.length();return this.divideScalar(r||1).multiplyScalar(fr(r,e,n))}floor(){return this.x=Math.floor(this.x),this.y=Math.floor(this.y),this.z=Math.floor(this.z),this}ceil(){return this.x=Math.ceil(this.x),this.y=Math.ceil(this.y),this.z=Math.ceil(this.z),this}round(){return this.x=Math.round(this.x),this.y=Math.round(this.y),this.z=Math.round(this.z),this}roundToZero(){return this.x=Math.trunc(this.x),this.y=Math.trunc(this.y),this.z=Math.trunc(this.z),this}negate(){return this.x=-this.x,this.y=-this.y,this.z=-this.z,this}dot(e){return this.x*e.x+this.y*e.y+this.z*e.z}lengthSq(){return this.x*this.x+this.y*this.y+this.z*this.z}length(){return Math.sqrt(this.x*this.x+this.y*this.y+this.z*this.z)}manhattanLength(){return Math.abs(this.x)+Math.abs(this.y)+Math.abs(this.z)}normalize(){return this.divideScalar(this.length()||1)}setLength(e){return this.normalize().multiplyScalar(e)}lerp(e,n){return this.x+=(e.x-this.x)*n,this.y+=(e.y-this.y)*n,this.z+=(e.z-this.z)*n,this}lerpVectors(e,n,r){return this.x=e.x+(n.x-e.x)*r,this.y=e.y+(n.y-e.y)*r,this.z=e.z+(n.z-e.z)*r,this}cross(e){return this.crossVectors(this,e)}crossVectors(e,n){const r=e.x,i=e.y,s=e.z,o=n.x,l=n.y,c=n.z;return this.x=i*c-s*l,this.y=s*o-r*c,this.z=r*l-i*o,this}projectOnVector(e){const n=e.lengthSq();if(n===0)return this.set(0,0,0);const r=e.dot(this)/n;return this.copy(e).multiplyScalar(r)}projectOnPlane(e){return qM.copy(this).projectOnVector(e),this.sub(qM)}reflect(e){return this.sub(qM.copy(e).multiplyScalar(2*this.dot(e)))}angleTo(e){const n=Math.sqrt(this.lengthSq()*e.lengthSq());if(n===0)return Math.PI/2;const r=this.dot(e)/n;return Math.acos(fr(r,-1,1))}distanceTo(e){return Math.sqrt(this.distanceToSquared(e))}distanceToSquared(e){const n=this.x-e.x,r=this.y-e.y,i=this.z-e.z;return n*n+r*r+i*i}manhattanDistanceTo(e){return Math.abs(this.x-e.x)+Math.abs(this.y-e.y)+Math.abs(this.z-e.z)}setFromSpherical(e){return this.setFromSphericalCoords(e.radius,e.phi,e.theta)}setFromSphericalCoords(e,n,r){const i=Math.sin(n)*e;return this.x=i*Math.sin(r),this.y=Math.cos(n)*e,this.z=i*Math.cos(r),this}setFromCylindrical(e){return this.setFromCylindricalCoords(e.radius,e.theta,e.y)}setFromCylindricalCoords(e,n,r){return this.x=e*Math.sin(n),this.y=r,this.z=e*Math.cos(n),this}setFromMatrixPosition(e){const n=e.elements;return this.x=n[12],this.y=n[13],this.z=n[14],this}setFromMatrixScale(e){const n=this.setFromMatrixColumn(e,0).length(),r=this.setFromMatrixColumn(e,1).length(),i=this.setFromMatrixColumn(e,2).length();return this.x=n,this.y=r,this.z=i,this}setFromMatrixColumn(e,n){return this.fromArray(e.elements,n*4)}setFromMatrix3Column(e,n){return this.fromArray(e.elements,n*3)}setFromEuler(e){return this.x=e._x,this.y=e._y,this.z=e._z,this}setFromColor(e){return this.x=e.r,this.y=e.g,this.z=e.b,this}equals(e){return e.x===this.x&&e.y===this.y&&e.z===this.z}fromArray(e,n=0){return this.x=e[n],this.y=e[n+1],this.z=e[n+2],this}toArray(e=[],n=0){return e[n]=this.x,e[n+1]=this.y,e[n+2]=this.z,e}fromBufferAttribute(e,n){return this.x=e.getX(n),this.y=e.getY(n),this.z=e.getZ(n),this}random(){return this.x=Math.random(),this.y=Math.random(),this.z=Math.random(),this}randomDirection(){const e=Math.random()*Math.PI*2,n=Math.random()*2-1,r=Math.sqrt(1-n*n);return this.x=r*Math.cos(e),this.y=n,this.z=r*Math.sin(e),this}*[Symbol.iterator](){yield this.x,yield this.y,yield this.z}};const qM=new Nt,f6=new Sg;let ar=class VJ{constructor(e,n,r,i,s,o,l,c,d){VJ.prototype.isMatrix3=!0,this.elements=[1,0,0,0,1,0,0,0,1],e!==void 0&&this.set(e,n,r,i,s,o,l,c,d)}set(e,n,r,i,s,o,l,c,d){const u=this.elements;return u[0]=e,u[1]=i,u[2]=l,u[3]=n,u[4]=s,u[5]=c,u[6]=r,u[7]=o,u[8]=d,this}identity(){return this.set(1,0,0,0,1,0,0,0,1),this}copy(e){const n=this.elements,r=e.elements;return n[0]=r[0],n[1]=r[1],n[2]=r[2],n[3]=r[3],n[4]=r[4],n[5]=r[5],n[6]=r[6],n[7]=r[7],n[8]=r[8],this}extractBasis(e,n,r){return e.setFromMatrix3Column(this,0),n.setFromMatrix3Column(this,1),r.setFromMatrix3Column(this,2),this}setFromMatrix4(e){const n=e.elements;return this.set(n[0],n[4],n[8],n[1],n[5],n[9],n[2],n[6],n[10]),this}multiply(e){return this.multiplyMatrices(this,e)}premultiply(e){return this.multiplyMatrices(e,this)}multiplyMatrices(e,n){const r=e.elements,i=n.elements,s=this.elements,o=r[0],l=r[3],c=r[6],d=r[1],u=r[4],m=r[7],p=r[2],f=r[5],x=r[8],v=i[0],b=i[3],g=i[6],S=i[1],N=i[4],P=i[7],C=i[2],A=i[5],T=i[8];return s[0]=o*v+l*S+c*C,s[3]=o*b+l*N+c*A,s[6]=o*g+l*P+c*T,s[1]=d*v+u*S+m*C,s[4]=d*b+u*N+m*A,s[7]=d*g+u*P+m*T,s[2]=p*v+f*S+x*C,s[5]=p*b+f*N+x*A,s[8]=p*g+f*P+x*T,this}multiplyScalar(e){const n=this.elements;return n[0]*=e,n[3]*=e,n[6]*=e,n[1]*=e,n[4]*=e,n[7]*=e,n[2]*=e,n[5]*=e,n[8]*=e,this}determinant(){const e=this.elements,n=e[0],r=e[1],i=e[2],s=e[3],o=e[4],l=e[5],c=e[6],d=e[7],u=e[8];return n*o*u-n*l*d-r*s*u+r*l*c+i*s*d-i*o*c}invert(){const e=this.elements,n=e[0],r=e[1],i=e[2],s=e[3],o=e[4],l=e[5],c=e[6],d=e[7],u=e[8],m=u*o-l*d,p=l*c-u*s,f=d*s-o*c,x=n*m+r*p+i*f;if(x===0)return this.set(0,0,0,0,0,0,0,0,0);const v=1/x;return e[0]=m*v,e[1]=(i*d-u*r)*v,e[2]=(l*r-i*o)*v,e[3]=p*v,e[4]=(u*n-i*c)*v,e[5]=(i*s-l*n)*v,e[6]=f*v,e[7]=(r*c-d*n)*v,e[8]=(o*n-r*s)*v,this}transpose(){let e;const n=this.elements;return e=n[1],n[1]=n[3],n[3]=e,e=n[2],n[2]=n[6],n[6]=e,e=n[5],n[5]=n[7],n[7]=e,this}getNormalMatrix(e){return this.setFromMatrix4(e).invert().transpose()}transposeIntoArray(e){const n=this.elements;return e[0]=n[0],e[1]=n[3],e[2]=n[6],e[3]=n[1],e[4]=n[4],e[5]=n[7],e[6]=n[2],e[7]=n[5],e[8]=n[8],this}setUvTransform(e,n,r,i,s,o,l){const c=Math.cos(s),d=Math.sin(s);return this.set(r*c,r*d,-r*(c*o+d*l)+o+e,-i*d,i*c,-i*(-d*o+c*l)+l+n,0,0,1),this}scale(e,n){return this.premultiply($M.makeScale(e,n)),this}rotate(e){return this.premultiply($M.makeRotation(-e)),this}translate(e,n){return this.premultiply($M.makeTranslation(e,n)),this}makeTranslation(e,n){return e.isVector2?this.set(1,0,e.x,0,1,e.y,0,0,1):this.set(1,0,e,0,1,n,0,0,1),this}makeRotation(e){const n=Math.cos(e),r=Math.sin(e);return this.set(n,-r,0,r,n,0,0,0,1),this}makeScale(e,n){return this.set(e,0,0,0,n,0,0,0,1),this}equals(e){const n=this.elements,r=e.elements;for(let i=0;i<9;i++)if(n[i]!==r[i])return!1;return!0}fromArray(e,n=0){for(let r=0;r<9;r++)this.elements[r]=e[r+n];return this}toArray(e=[],n=0){const r=this.elements;return e[n]=r[0],e[n+1]=r[1],e[n+2]=r[2],e[n+3]=r[3],e[n+4]=r[4],e[n+5]=r[5],e[n+6]=r[6],e[n+7]=r[7],e[n+8]=r[8],e}clone(){return new this.constructor().fromArray(this.elements)}};const $M=new ar,g6=new ar().set(.4123908,.3575843,.1804808,.212639,.7151687,.0721923,.0193308,.1191948,.9505322),b6=new ar().set(3.2409699,-1.5373832,-.4986108,-.9692436,1.8759675,.0415551,.0556301,-.203977,1.0569715);function h0e(){const t={enabled:!0,workingColorSpace:ty,spaces:{},convert:function(i,s,o){return this.enabled===!1||s===o||!s||!o||(this.spaces[s].transfer===Zr&&(i.r=um(i.r),i.g=um(i.g),i.b=um(i.b)),this.spaces[s].primaries!==this.spaces[o].primaries&&(i.applyMatrix3(this.spaces[s].toXYZ),i.applyMatrix3(this.spaces[o].fromXYZ)),this.spaces[o].transfer===Zr&&(i.r=zx(i.r),i.g=zx(i.g),i.b=zx(i.b))),i},workingToColorSpace:function(i,s){return this.convert(i,this.workingColorSpace,s)},colorSpaceToWorking:function(i,s){return this.convert(i,s,this.workingColorSpace)},getPrimaries:function(i){return this.spaces[i].primaries},getTransfer:function(i){return i===Bh?IN:this.spaces[i].transfer},getToneMappingMode:function(i){return this.spaces[i].outputColorSpaceConfig.toneMappingMode||"standard"},getLuminanceCoefficients:function(i,s=this.workingColorSpace){return i.fromArray(this.spaces[s].luminanceCoefficients)},define:function(i){Object.assign(this.spaces,i)},_getMatrix:function(i,s,o){return i.copy(this.spaces[s].toXYZ).multiply(this.spaces[o].fromXYZ)},_getDrawingBufferColorSpace:function(i){return this.spaces[i].outputColorSpaceConfig.drawingBufferColorSpace},_getUnpackColorSpace:function(i=this.workingColorSpace){return this.spaces[i].workingColorSpaceConfig.unpackColorSpace},fromWorkingColorSpace:function(i,s){return bw("ColorManagement: .fromWorkingColorSpace() has been renamed to .workingToColorSpace()."),t.workingToColorSpace(i,s)},toWorkingColorSpace:function(i,s){return bw("ColorManagement: .toWorkingColorSpace() has been renamed to .colorSpaceToWorking()."),t.colorSpaceToWorking(i,s)}},e=[.64,.33,.3,.6,.15,.06],n=[.2126,.7152,.0722],r=[.3127,.329];return t.define({[ty]:{primaries:e,whitePoint:r,transfer:IN,toXYZ:g6,fromXYZ:b6,luminanceCoefficients:n,workingColorSpaceConfig:{unpackColorSpace:al},outputColorSpaceConfig:{drawingBufferColorSpace:al}},[al]:{primaries:e,whitePoint:r,transfer:Zr,toXYZ:g6,fromXYZ:b6,luminanceCoefficients:n,outputColorSpaceConfig:{drawingBufferColorSpace:al}}}),t}const Fr=h0e();function um(t){return t<.04045?t*.0773993808:Math.pow(t*.9478672986+.0521327014,2.4)}function zx(t){return t<.0031308?t*12.92:1.055*Math.pow(t,.41666)-.055}let Db,p0e=class{static getDataURL(e,n="image/png"){if(/^data:/i.test(e.src)||typeof HTMLCanvasElement>"u")return e.src;let r;if(e instanceof HTMLCanvasElement)r=e;else{Db===void 0&&(Db=zN("canvas")),Db.width=e.width,Db.height=e.height;const i=Db.getContext("2d");e instanceof ImageData?i.putImageData(e,0,0):i.drawImage(e,0,0,e.width,e.height),r=Db}return r.toDataURL(n)}static sRGBToLinear(e){if(typeof HTMLImageElement<"u"&&e instanceof HTMLImageElement||typeof HTMLCanvasElement<"u"&&e instanceof HTMLCanvasElement||typeof ImageBitmap<"u"&&e instanceof ImageBitmap){const n=zN("canvas");n.width=e.width,n.height=e.height;const r=n.getContext("2d");r.drawImage(e,0,0,e.width,e.height);const i=r.getImageData(0,0,e.width,e.height),s=i.data;for(let o=0;o<s.length;o++)s[o]=um(s[o]/255)*255;return r.putImageData(i,0,0),n}else if(e.data){const n=e.data.slice(0);for(let r=0;r<n.length;r++)n instanceof Uint8Array||n instanceof Uint8ClampedArray?n[r]=Math.floor(um(n[r]/255)*255):n[r]=um(n[r]);return{data:n,width:e.width,height:e.height}}else return Hn("ImageUtils.sRGBToLinear(): Unsupported image type. No color space conversion applied."),e}},f0e=0,bO=class{constructor(e=null){this.isSource=!0,Object.defineProperty(this,"id",{value:f0e++}),this.uuid=pS(),this.data=e,this.dataReady=!0,this.version=0}getSize(e){const n=this.data;return typeof HTMLVideoElement<"u"&&n instanceof HTMLVideoElement?e.set(n.videoWidth,n.videoHeight,0):n instanceof VideoFrame?e.set(n.displayHeight,n.displayWidth,0):n!==null?e.set(n.width,n.height,n.depth||0):e.set(0,0,0),e}set needsUpdate(e){e===!0&&this.version++}toJSON(e){const n=e===void 0||typeof e=="string";if(!n&&e.images[this.uuid]!==void 0)return e.images[this.uuid];const r={uuid:this.uuid,url:""},i=this.data;if(i!==null){let s;if(Array.isArray(i)){s=[];for(let o=0,l=i.length;o<l;o++)i[o].isDataTexture?s.push(VM(i[o].image)):s.push(VM(i[o]))}else s=VM(i);r.url=s}return n||(e.images[this.uuid]=r),r}};function VM(t){return typeof HTMLImageElement<"u"&&t instanceof HTMLImageElement||typeof HTMLCanvasElement<"u"&&t instanceof HTMLCanvasElement||typeof ImageBitmap<"u"&&t instanceof ImageBitmap?p0e.getDataURL(t):t.data?{data:Array.from(t.data),width:t.width,height:t.height,type:t.data.constructor.name}:(Hn("Texture: Unable to serialize Texture."),{})}let g0e=0;const GM=new Nt;let Jc=class Jk extends Wg{constructor(e=Jk.DEFAULT_IMAGE,n=Jk.DEFAULT_MAPPING,r=em,i=em,s=Zl,o=Uf,l=Hc,c=$d,d=Jk.DEFAULT_ANISOTROPY,u=Bh){super(),this.isTexture=!0,Object.defineProperty(this,"id",{value:g0e++}),this.uuid=pS(),this.name="",this.source=new bO(e),this.mipmaps=[],this.mapping=n,this.channel=0,this.wrapS=r,this.wrapT=i,this.magFilter=s,this.minFilter=o,this.anisotropy=d,this.format=l,this.internalFormat=null,this.type=c,this.offset=new tr(0,0),this.repeat=new tr(1,1),this.center=new tr(0,0),this.rotation=0,this.matrixAutoUpdate=!0,this.matrix=new ar,this.generateMipmaps=!0,this.premultiplyAlpha=!1,this.flipY=!0,this.unpackAlignment=4,this.colorSpace=u,this.userData={},this.updateRanges=[],this.version=0,this.onUpdate=null,this.renderTarget=null,this.isRenderTargetTexture=!1,this.isArrayTexture=!!(e&&e.depth&&e.depth>1),this.pmremVersion=0}get width(){return this.source.getSize(GM).x}get height(){return this.source.getSize(GM).y}get depth(){return this.source.getSize(GM).z}get image(){return this.source.data}set image(e=null){this.source.data=e}updateMatrix(){this.matrix.setUvTransform(this.offset.x,this.offset.y,this.repeat.x,this.repeat.y,this.rotation,this.center.x,this.center.y)}addUpdateRange(e,n){this.updateRanges.push({start:e,count:n})}clearUpdateRanges(){this.updateRanges.length=0}clone(){return new this.constructor().copy(this)}copy(e){return this.name=e.name,this.source=e.source,this.mipmaps=e.mipmaps.slice(0),this.mapping=e.mapping,this.channel=e.channel,this.wrapS=e.wrapS,this.wrapT=e.wrapT,this.magFilter=e.magFilter,this.minFilter=e.minFilter,this.anisotropy=e.anisotropy,this.format=e.format,this.internalFormat=e.internalFormat,this.type=e.type,this.offset.copy(e.offset),this.repeat.copy(e.repeat),this.center.copy(e.center),this.rotation=e.rotation,this.matrixAutoUpdate=e.matrixAutoUpdate,this.matrix.copy(e.matrix),this.generateMipmaps=e.generateMipmaps,this.premultiplyAlpha=e.premultiplyAlpha,this.flipY=e.flipY,this.unpackAlignment=e.unpackAlignment,this.colorSpace=e.colorSpace,this.renderTarget=e.renderTarget,this.isRenderTargetTexture=e.isRenderTargetTexture,this.isArrayTexture=e.isArrayTexture,this.userData=JSON.parse(JSON.stringify(e.userData)),this.needsUpdate=!0,this}setValues(e){for(const n in e){const r=e[n];if(r===void 0){Hn(`Texture.setValues(): parameter '${n}' has value of undefined.`);continue}const i=this[n];if(i===void 0){Hn(`Texture.setValues(): property '${n}' does not exist.`);continue}i&&r&&i.isVector2&&r.isVector2||i&&r&&i.isVector3&&r.isVector3||i&&r&&i.isMatrix3&&r.isMatrix3?i.copy(r):this[n]=r}}toJSON(e){const n=e===void 0||typeof e=="string";if(!n&&e.textures[this.uuid]!==void 0)return e.textures[this.uuid];const r={metadata:{version:4.7,type:"Texture",generator:"Texture.toJSON"},uuid:this.uuid,name:this.name,image:this.source.toJSON(e).uuid,mapping:this.mapping,channel:this.channel,repeat:[this.repeat.x,this.repeat.y],offset:[this.offset.x,this.offset.y],center:[this.center.x,this.center.y],rotation:this.rotation,wrap:[this.wrapS,this.wrapT],format:this.format,internalFormat:this.internalFormat,type:this.type,colorSpace:this.colorSpace,minFilter:this.minFilter,magFilter:this.magFilter,anisotropy:this.anisotropy,flipY:this.flipY,generateMipmaps:this.generateMipmaps,premultiplyAlpha:this.premultiplyAlpha,unpackAlignment:this.unpackAlignment};return Object.keys(this.userData).length>0&&(r.userData=this.userData),n||(e.textures[this.uuid]=r),r}dispose(){this.dispatchEvent({type:"dispose"})}transformUv(e){if(this.mapping!==EJ)return e;if(e.applyMatrix3(this.matrix),e.x<0||e.x>1)switch(this.wrapS){case qF:e.x=e.x-Math.floor(e.x);break;case em:e.x=e.x<0?0:1;break;case $F:Math.abs(Math.floor(e.x)%2)===1?e.x=Math.ceil(e.x)-e.x:e.x=e.x-Math.floor(e.x);break}if(e.y<0||e.y>1)switch(this.wrapT){case qF:e.y=e.y-Math.floor(e.y);break;case em:e.y=e.y<0?0:1;break;case $F:Math.abs(Math.floor(e.y)%2)===1?e.y=Math.ceil(e.y)-e.y:e.y=e.y-Math.floor(e.y);break}return this.flipY&&(e.y=1-e.y),e}set needsUpdate(e){e===!0&&(this.version++,this.source.needsUpdate=!0)}set needsPMREMUpdate(e){e===!0&&this.pmremVersion++}};Jc.DEFAULT_IMAGE=null;Jc.DEFAULT_MAPPING=EJ;Jc.DEFAULT_ANISOTROPY=1;let bi=class GJ{constructor(e=0,n=0,r=0,i=1){GJ.prototype.isVector4=!0,this.x=e,this.y=n,this.z=r,this.w=i}get width(){return this.z}set width(e){this.z=e}get height(){return this.w}set height(e){this.w=e}set(e,n,r,i){return this.x=e,this.y=n,this.z=r,this.w=i,this}setScalar(e){return this.x=e,this.y=e,this.z=e,this.w=e,this}setX(e){return this.x=e,this}setY(e){return this.y=e,this}setZ(e){return this.z=e,this}setW(e){return this.w=e,this}setComponent(e,n){switch(e){case 0:this.x=n;break;case 1:this.y=n;break;case 2:this.z=n;break;case 3:this.w=n;break;default:throw new Error("index is out of range: "+e)}return this}getComponent(e){switch(e){case 0:return this.x;case 1:return this.y;case 2:return this.z;case 3:return this.w;default:throw new Error("index is out of range: "+e)}}clone(){return new this.constructor(this.x,this.y,this.z,this.w)}copy(e){return this.x=e.x,this.y=e.y,this.z=e.z,this.w=e.w!==void 0?e.w:1,this}add(e){return this.x+=e.x,this.y+=e.y,this.z+=e.z,this.w+=e.w,this}addScalar(e){return this.x+=e,this.y+=e,this.z+=e,this.w+=e,this}addVectors(e,n){return this.x=e.x+n.x,this.y=e.y+n.y,this.z=e.z+n.z,this.w=e.w+n.w,this}addScaledVector(e,n){return this.x+=e.x*n,this.y+=e.y*n,this.z+=e.z*n,this.w+=e.w*n,this}sub(e){return this.x-=e.x,this.y-=e.y,this.z-=e.z,this.w-=e.w,this}subScalar(e){return this.x-=e,this.y-=e,this.z-=e,this.w-=e,this}subVectors(e,n){return this.x=e.x-n.x,this.y=e.y-n.y,this.z=e.z-n.z,this.w=e.w-n.w,this}multiply(e){return this.x*=e.x,this.y*=e.y,this.z*=e.z,this.w*=e.w,this}multiplyScalar(e){return this.x*=e,this.y*=e,this.z*=e,this.w*=e,this}applyMatrix4(e){const n=this.x,r=this.y,i=this.z,s=this.w,o=e.elements;return this.x=o[0]*n+o[4]*r+o[8]*i+o[12]*s,this.y=o[1]*n+o[5]*r+o[9]*i+o[13]*s,this.z=o[2]*n+o[6]*r+o[10]*i+o[14]*s,this.w=o[3]*n+o[7]*r+o[11]*i+o[15]*s,this}divide(e){return this.x/=e.x,this.y/=e.y,this.z/=e.z,this.w/=e.w,this}divideScalar(e){return this.multiplyScalar(1/e)}setAxisAngleFromQuaternion(e){this.w=2*Math.acos(e.w);const n=Math.sqrt(1-e.w*e.w);return n<1e-4?(this.x=1,this.y=0,this.z=0):(this.x=e.x/n,this.y=e.y/n,this.z=e.z/n),this}setAxisAngleFromRotationMatrix(e){let n,r,i,s;const c=e.elements,d=c[0],u=c[4],m=c[8],p=c[1],f=c[5],x=c[9],v=c[2],b=c[6],g=c[10];if(Math.abs(u-p)<.01&&Math.abs(m-v)<.01&&Math.abs(x-b)<.01){if(Math.abs(u+p)<.1&&Math.abs(m+v)<.1&&Math.abs(x+b)<.1&&Math.abs(d+f+g-3)<.1)return this.set(1,0,0,0),this;n=Math.PI;const N=(d+1)/2,P=(f+1)/2,C=(g+1)/2,A=(u+p)/4,T=(m+v)/4,F=(x+b)/4;return N>P&&N>C?N<.01?(r=0,i=.707106781,s=.707106781):(r=Math.sqrt(N),i=A/r,s=T/r):P>C?P<.01?(r=.707106781,i=0,s=.707106781):(i=Math.sqrt(P),r=A/i,s=F/i):C<.01?(r=.707106781,i=.707106781,s=0):(s=Math.sqrt(C),r=T/s,i=F/s),this.set(r,i,s,n),this}let S=Math.sqrt((b-x)*(b-x)+(m-v)*(m-v)+(p-u)*(p-u));return Math.abs(S)<.001&&(S=1),this.x=(b-x)/S,this.y=(m-v)/S,this.z=(p-u)/S,this.w=Math.acos((d+f+g-1)/2),this}setFromMatrixPosition(e){const n=e.elements;return this.x=n[12],this.y=n[13],this.z=n[14],this.w=n[15],this}min(e){return this.x=Math.min(this.x,e.x),this.y=Math.min(this.y,e.y),this.z=Math.min(this.z,e.z),this.w=Math.min(this.w,e.w),this}max(e){return this.x=Math.max(this.x,e.x),this.y=Math.max(this.y,e.y),this.z=Math.max(this.z,e.z),this.w=Math.max(this.w,e.w),this}clamp(e,n){return this.x=fr(this.x,e.x,n.x),this.y=fr(this.y,e.y,n.y),this.z=fr(this.z,e.z,n.z),this.w=fr(this.w,e.w,n.w),this}clampScalar(e,n){return this.x=fr(this.x,e,n),this.y=fr(this.y,e,n),this.z=fr(this.z,e,n),this.w=fr(this.w,e,n),this}clampLength(e,n){const r=this.length();return this.divideScalar(r||1).multiplyScalar(fr(r,e,n))}floor(){return this.x=Math.floor(this.x),this.y=Math.floor(this.y),this.z=Math.floor(this.z),this.w=Math.floor(this.w),this}ceil(){return this.x=Math.ceil(this.x),this.y=Math.ceil(this.y),this.z=Math.ceil(this.z),this.w=Math.ceil(this.w),this}round(){return this.x=Math.round(this.x),this.y=Math.round(this.y),this.z=Math.round(this.z),this.w=Math.round(this.w),this}roundToZero(){return this.x=Math.trunc(this.x),this.y=Math.trunc(this.y),this.z=Math.trunc(this.z),this.w=Math.trunc(this.w),this}negate(){return this.x=-this.x,this.y=-this.y,this.z=-this.z,this.w=-this.w,this}dot(e){return this.x*e.x+this.y*e.y+this.z*e.z+this.w*e.w}lengthSq(){return this.x*this.x+this.y*this.y+this.z*this.z+this.w*this.w}length(){return Math.sqrt(this.x*this.x+this.y*this.y+this.z*this.z+this.w*this.w)}manhattanLength(){return Math.abs(this.x)+Math.abs(this.y)+Math.abs(this.z)+Math.abs(this.w)}normalize(){return this.divideScalar(this.length()||1)}setLength(e){return this.normalize().multiplyScalar(e)}lerp(e,n){return this.x+=(e.x-this.x)*n,this.y+=(e.y-this.y)*n,this.z+=(e.z-this.z)*n,this.w+=(e.w-this.w)*n,this}lerpVectors(e,n,r){return this.x=e.x+(n.x-e.x)*r,this.y=e.y+(n.y-e.y)*r,this.z=e.z+(n.z-e.z)*r,this.w=e.w+(n.w-e.w)*r,this}equals(e){return e.x===this.x&&e.y===this.y&&e.z===this.z&&e.w===this.w}fromArray(e,n=0){return this.x=e[n],this.y=e[n+1],this.z=e[n+2],this.w=e[n+3],this}toArray(e=[],n=0){return e[n]=this.x,e[n+1]=this.y,e[n+2]=this.z,e[n+3]=this.w,e}fromBufferAttribute(e,n){return this.x=e.getX(n),this.y=e.getY(n),this.z=e.getZ(n),this.w=e.getW(n),this}random(){return this.x=Math.random(),this.y=Math.random(),this.z=Math.random(),this.w=Math.random(),this}*[Symbol.iterator](){yield this.x,yield this.y,yield this.z,yield this.w}},b0e=class extends Wg{constructor(e=1,n=1,r={}){super(),r=Object.assign({generateMipmaps:!1,internalFormat:null,minFilter:Zl,depthBuffer:!0,stencilBuffer:!1,resolveDepthBuffer:!0,resolveStencilBuffer:!0,depthTexture:null,samples:0,count:1,depth:1,multiview:!1},r),this.isRenderTarget=!0,this.width=e,this.height=n,this.depth=r.depth,this.scissor=new bi(0,0,e,n),this.scissorTest=!1,this.viewport=new bi(0,0,e,n);const i={width:e,height:n,depth:r.depth},s=new Jc(i);this.textures=[];const o=r.count;for(let l=0;l<o;l++)this.textures[l]=s.clone(),this.textures[l].isRenderTargetTexture=!0,this.textures[l].renderTarget=this;this._setTextureOptions(r),this.depthBuffer=r.depthBuffer,this.stencilBuffer=r.stencilBuffer,this.resolveDepthBuffer=r.resolveDepthBuffer,this.resolveStencilBuffer=r.resolveStencilBuffer,this._depthTexture=null,this.depthTexture=r.depthTexture,this.samples=r.samples,this.multiview=r.multiview}_setTextureOptions(e={}){const n={minFilter:Zl,generateMipmaps:!1,flipY:!1,internalFormat:null};e.mapping!==void 0&&(n.mapping=e.mapping),e.wrapS!==void 0&&(n.wrapS=e.wrapS),e.wrapT!==void 0&&(n.wrapT=e.wrapT),e.wrapR!==void 0&&(n.wrapR=e.wrapR),e.magFilter!==void 0&&(n.magFilter=e.magFilter),e.minFilter!==void 0&&(n.minFilter=e.minFilter),e.format!==void 0&&(n.format=e.format),e.type!==void 0&&(n.type=e.type),e.anisotropy!==void 0&&(n.anisotropy=e.anisotropy),e.colorSpace!==void 0&&(n.colorSpace=e.colorSpace),e.flipY!==void 0&&(n.flipY=e.flipY),e.generateMipmaps!==void 0&&(n.generateMipmaps=e.generateMipmaps),e.internalFormat!==void 0&&(n.internalFormat=e.internalFormat);for(let r=0;r<this.textures.length;r++)this.textures[r].setValues(n)}get texture(){return this.textures[0]}set texture(e){this.textures[0]=e}set depthTexture(e){this._depthTexture!==null&&(this._depthTexture.renderTarget=null),e!==null&&(e.renderTarget=this),this._depthTexture=e}get depthTexture(){return this._depthTexture}setSize(e,n,r=1){if(this.width!==e||this.height!==n||this.depth!==r){this.width=e,this.height=n,this.depth=r;for(let i=0,s=this.textures.length;i<s;i++)this.textures[i].image.width=e,this.textures[i].image.height=n,this.textures[i].image.depth=r,this.textures[i].isData3DTexture!==!0&&(this.textures[i].isArrayTexture=this.textures[i].image.depth>1);this.dispose()}this.viewport.set(0,0,e,n),this.scissor.set(0,0,e,n)}clone(){return new this.constructor().copy(this)}copy(e){this.width=e.width,this.height=e.height,this.depth=e.depth,this.scissor.copy(e.scissor),this.scissorTest=e.scissorTest,this.viewport.copy(e.viewport),this.textures.length=0;for(let n=0,r=e.textures.length;n<r;n++){this.textures[n]=e.textures[n].clone(),this.textures[n].isRenderTargetTexture=!0,this.textures[n].renderTarget=this;const i=Object.assign({},e.textures[n].image);this.textures[n].source=new bO(i)}return this.depthBuffer=e.depthBuffer,this.stencilBuffer=e.stencilBuffer,this.resolveDepthBuffer=e.resolveDepthBuffer,this.resolveStencilBuffer=e.resolveStencilBuffer,e.depthTexture!==null&&(this.depthTexture=e.depthTexture.clone()),this.samples=e.samples,this}dispose(){this.dispatchEvent({type:"dispose"})}},_g=class extends b0e{constructor(e=1,n=1,r={}){super(e,n,r),this.isWebGLRenderTarget=!0}},WJ=class extends Jc{constructor(e=null,n=1,r=1,i=1){super(null),this.isDataArrayTexture=!0,this.image={data:e,width:n,height:r,depth:i},this.magFilter=cl,this.minFilter=cl,this.wrapR=em,this.generateMipmaps=!1,this.flipY=!1,this.unpackAlignment=1,this.layerUpdates=new Set}addLayerUpdate(e){this.layerUpdates.add(e)}clearLayerUpdates(){this.layerUpdates.clear()}},x0e=class extends Jc{constructor(e=null,n=1,r=1,i=1){super(null),this.isData3DTexture=!0,this.image={data:e,width:n,height:r,depth:i},this.magFilter=cl,this.minFilter=cl,this.wrapR=em,this.generateMipmaps=!1,this.flipY=!1,this.unpackAlignment=1}},mp=class{constructor(e=new Nt(1/0,1/0,1/0),n=new Nt(-1/0,-1/0,-1/0)){this.isBox3=!0,this.min=e,this.max=n}set(e,n){return this.min.copy(e),this.max.copy(n),this}setFromArray(e){this.makeEmpty();for(let n=0,r=e.length;n<r;n+=3)this.expandByPoint(Pc.fromArray(e,n));return this}setFromBufferAttribute(e){this.makeEmpty();for(let n=0,r=e.count;n<r;n++)this.expandByPoint(Pc.fromBufferAttribute(e,n));return this}setFromPoints(e){this.makeEmpty();for(let n=0,r=e.length;n<r;n++)this.expandByPoint(e[n]);return this}setFromCenterAndSize(e,n){const r=Pc.copy(n).multiplyScalar(.5);return this.min.copy(e).sub(r),this.max.copy(e).add(r),this}setFromObject(e,n=!1){return this.makeEmpty(),this.expandByObject(e,n)}clone(){return new this.constructor().copy(this)}copy(e){return this.min.copy(e.min),this.max.copy(e.max),this}makeEmpty(){return this.min.x=this.min.y=this.min.z=1/0,this.max.x=this.max.y=this.max.z=-1/0,this}isEmpty(){return this.max.x<this.min.x||this.max.y<this.min.y||this.max.z<this.min.z}getCenter(e){return this.isEmpty()?e.set(0,0,0):e.addVectors(this.min,this.max).multiplyScalar(.5)}getSize(e){return this.isEmpty()?e.set(0,0,0):e.subVectors(this.max,this.min)}expandByPoint(e){return this.min.min(e),this.max.max(e),this}expandByVector(e){return this.min.sub(e),this.max.add(e),this}expandByScalar(e){return this.min.addScalar(-e),this.max.addScalar(e),this}expandByObject(e,n=!1){e.updateWorldMatrix(!1,!1);const r=e.geometry;if(r!==void 0){const s=r.getAttribute("position");if(n===!0&&s!==void 0&&e.isInstancedMesh!==!0)for(let o=0,l=s.count;o<l;o++)e.isMesh===!0?e.getVertexPosition(o,Pc):Pc.fromBufferAttribute(s,o),Pc.applyMatrix4(e.matrixWorld),this.expandByPoint(Pc);else e.boundingBox!==void 0?(e.boundingBox===null&&e.computeBoundingBox(),i1.copy(e.boundingBox)):(r.boundingBox===null&&r.computeBoundingBox(),i1.copy(r.boundingBox)),i1.applyMatrix4(e.matrixWorld),this.union(i1)}const i=e.children;for(let s=0,o=i.length;s<o;s++)this.expandByObject(i[s],n);return this}containsPoint(e){return e.x>=this.min.x&&e.x<=this.max.x&&e.y>=this.min.y&&e.y<=this.max.y&&e.z>=this.min.z&&e.z<=this.max.z}containsBox(e){return this.min.x<=e.min.x&&e.max.x<=this.max.x&&this.min.y<=e.min.y&&e.max.y<=this.max.y&&this.min.z<=e.min.z&&e.max.z<=this.max.z}getParameter(e,n){return n.set((e.x-this.min.x)/(this.max.x-this.min.x),(e.y-this.min.y)/(this.max.y-this.min.y),(e.z-this.min.z)/(this.max.z-this.min.z))}intersectsBox(e){return e.max.x>=this.min.x&&e.min.x<=this.max.x&&e.max.y>=this.min.y&&e.min.y<=this.max.y&&e.max.z>=this.min.z&&e.min.z<=this.max.z}intersectsSphere(e){return this.clampPoint(e.center,Pc),Pc.distanceToSquared(e.center)<=e.radius*e.radius}intersectsPlane(e){let n,r;return e.normal.x>0?(n=e.normal.x*this.min.x,r=e.normal.x*this.max.x):(n=e.normal.x*this.max.x,r=e.normal.x*this.min.x),e.normal.y>0?(n+=e.normal.y*this.min.y,r+=e.normal.y*this.max.y):(n+=e.normal.y*this.max.y,r+=e.normal.y*this.min.y),e.normal.z>0?(n+=e.normal.z*this.min.z,r+=e.normal.z*this.max.z):(n+=e.normal.z*this.max.z,r+=e.normal.z*this.min.z),n<=-e.constant&&r>=-e.constant}intersectsTriangle(e){if(this.isEmpty())return!1;this.getCenter(Iv),s1.subVectors(this.max,Iv),Fb.subVectors(e.a,Iv),Rb.subVectors(e.b,Iv),Lb.subVectors(e.c,Iv),ph.subVectors(Rb,Fb),fh.subVectors(Lb,Rb),hf.subVectors(Fb,Lb);let n=[0,-ph.z,ph.y,0,-fh.z,fh.y,0,-hf.z,hf.y,ph.z,0,-ph.x,fh.z,0,-fh.x,hf.z,0,-hf.x,-ph.y,ph.x,0,-fh.y,fh.x,0,-hf.y,hf.x,0];return!WM(n,Fb,Rb,Lb,s1)||(n=[1,0,0,0,1,0,0,0,1],!WM(n,Fb,Rb,Lb,s1))?!1:(o1.crossVectors(ph,fh),n=[o1.x,o1.y,o1.z],WM(n,Fb,Rb,Lb,s1))}clampPoint(e,n){return n.copy(e).clamp(this.min,this.max)}distanceToPoint(e){return this.clampPoint(e,Pc).distanceTo(e)}getBoundingSphere(e){return this.isEmpty()?e.makeEmpty():(this.getCenter(e.center),e.radius=this.getSize(Pc).length()*.5),e}intersect(e){return this.min.max(e.min),this.max.min(e.max),this.isEmpty()&&this.makeEmpty(),this}union(e){return this.min.min(e.min),this.max.max(e.max),this}applyMatrix4(e){return this.isEmpty()?this:(ku[0].set(this.min.x,this.min.y,this.min.z).applyMatrix4(e),ku[1].set(this.min.x,this.min.y,this.max.z).applyMatrix4(e),ku[2].set(this.min.x,this.max.y,this.min.z).applyMatrix4(e),ku[3].set(this.min.x,this.max.y,this.max.z).applyMatrix4(e),ku[4].set(this.max.x,this.min.y,this.min.z).applyMatrix4(e),ku[5].set(this.max.x,this.min.y,this.max.z).applyMatrix4(e),ku[6].set(this.max.x,this.max.y,this.min.z).applyMatrix4(e),ku[7].set(this.max.x,this.max.y,this.max.z).applyMatrix4(e),this.setFromPoints(ku),this)}translate(e){return this.min.add(e),this.max.add(e),this}equals(e){return e.min.equals(this.min)&&e.max.equals(this.max)}toJSON(){return{min:this.min.toArray(),max:this.max.toArray()}}fromJSON(e){return this.min.fromArray(e.min),this.max.fromArray(e.max),this}};const ku=[new Nt,new Nt,new Nt,new Nt,new Nt,new Nt,new Nt,new Nt],Pc=new Nt,i1=new mp,Fb=new Nt,Rb=new Nt,Lb=new Nt,ph=new Nt,fh=new Nt,hf=new Nt,Iv=new Nt,s1=new Nt,o1=new Nt,pf=new Nt;function WM(t,e,n,r,i){for(let s=0,o=t.length-3;s<=o;s+=3){pf.fromArray(t,s);const l=i.x*Math.abs(pf.x)+i.y*Math.abs(pf.y)+i.z*Math.abs(pf.z),c=e.dot(pf),d=n.dot(pf),u=r.dot(pf);if(Math.max(-Math.max(c,d,u),Math.min(c,d,u))>l)return!1}return!0}const y0e=new mp,Ov=new Nt,KM=new Nt;let iT=class{constructor(e=new Nt,n=-1){this.isSphere=!0,this.center=e,this.radius=n}set(e,n){return this.center.copy(e),this.radius=n,this}setFromPoints(e,n){const r=this.center;n!==void 0?r.copy(n):y0e.setFromPoints(e).getCenter(r);let i=0;for(let s=0,o=e.length;s<o;s++)i=Math.max(i,r.distanceToSquared(e[s]));return this.radius=Math.sqrt(i),this}copy(e){return this.center.copy(e.center),this.radius=e.radius,this}isEmpty(){return this.radius<0}makeEmpty(){return this.center.set(0,0,0),this.radius=-1,this}containsPoint(e){return e.distanceToSquared(this.center)<=this.radius*this.radius}distanceToPoint(e){return e.distanceTo(this.center)-this.radius}intersectsSphere(e){const n=this.radius+e.radius;return e.center.distanceToSquared(this.center)<=n*n}intersectsBox(e){return e.intersectsSphere(this)}intersectsPlane(e){return Math.abs(e.distanceToPoint(this.center))<=this.radius}clampPoint(e,n){const r=this.center.distanceToSquared(e);return n.copy(e),r>this.radius*this.radius&&(n.sub(this.center).normalize(),n.multiplyScalar(this.radius).add(this.center)),n}getBoundingBox(e){return this.isEmpty()?(e.makeEmpty(),e):(e.set(this.center,this.center),e.expandByScalar(this.radius),e)}applyMatrix4(e){return this.center.applyMatrix4(e),this.radius=this.radius*e.getMaxScaleOnAxis(),this}translate(e){return this.center.add(e),this}expandByPoint(e){if(this.isEmpty())return this.center.copy(e),this.radius=0,this;Ov.subVectors(e,this.center);const n=Ov.lengthSq();if(n>this.radius*this.radius){const r=Math.sqrt(n),i=(r-this.radius)*.5;this.center.addScaledVector(Ov,i/r),this.radius+=i}return this}union(e){return e.isEmpty()?this:this.isEmpty()?(this.copy(e),this):(this.center.equals(e.center)===!0?this.radius=Math.max(this.radius,e.radius):(KM.subVectors(e.center,this.center).setLength(e.radius),this.expandByPoint(Ov.copy(e.center).add(KM)),this.expandByPoint(Ov.copy(e.center).sub(KM))),this)}equals(e){return e.center.equals(this.center)&&e.radius===this.radius}clone(){return new this.constructor().copy(this)}toJSON(){return{radius:this.radius,center:this.center.toArray()}}fromJSON(e){return this.radius=e.radius,this.center.fromArray(e.center),this}};const Nu=new Nt,XM=new Nt,l1=new Nt,gh=new Nt,YM=new Nt,c1=new Nt,QM=new Nt;let xO=class{constructor(e=new Nt,n=new Nt(0,0,-1)){this.origin=e,this.direction=n}set(e,n){return this.origin.copy(e),this.direction.copy(n),this}copy(e){return this.origin.copy(e.origin),this.direction.copy(e.direction),this}at(e,n){return n.copy(this.origin).addScaledVector(this.direction,e)}lookAt(e){return this.direction.copy(e).sub(this.origin).normalize(),this}recast(e){return this.origin.copy(this.at(e,Nu)),this}closestPointToPoint(e,n){n.subVectors(e,this.origin);const r=n.dot(this.direction);return r<0?n.copy(this.origin):n.copy(this.origin).addScaledVector(this.direction,r)}distanceToPoint(e){return Math.sqrt(this.distanceSqToPoint(e))}distanceSqToPoint(e){const n=Nu.subVectors(e,this.origin).dot(this.direction);return n<0?this.origin.distanceToSquared(e):(Nu.copy(this.origin).addScaledVector(this.direction,n),Nu.distanceToSquared(e))}distanceSqToSegment(e,n,r,i){XM.copy(e).add(n).multiplyScalar(.5),l1.copy(n).sub(e).normalize(),gh.copy(this.origin).sub(XM);const s=e.distanceTo(n)*.5,o=-this.direction.dot(l1),l=gh.dot(this.direction),c=-gh.dot(l1),d=gh.lengthSq(),u=Math.abs(1-o*o);let m,p,f,x;if(u>0)if(m=o*c-l,p=o*l-c,x=s*u,m>=0)if(p>=-x)if(p<=x){const v=1/u;m*=v,p*=v,f=m*(m+o*p+2*l)+p*(o*m+p+2*c)+d}else p=s,m=Math.max(0,-(o*p+l)),f=-m*m+p*(p+2*c)+d;else p=-s,m=Math.max(0,-(o*p+l)),f=-m*m+p*(p+2*c)+d;else p<=-x?(m=Math.max(0,-(-o*s+l)),p=m>0?-s:Math.min(Math.max(-s,-c),s),f=-m*m+p*(p+2*c)+d):p<=x?(m=0,p=Math.min(Math.max(-s,-c),s),f=p*(p+2*c)+d):(m=Math.max(0,-(o*s+l)),p=m>0?s:Math.min(Math.max(-s,-c),s),f=-m*m+p*(p+2*c)+d);else p=o>0?-s:s,m=Math.max(0,-(o*p+l)),f=-m*m+p*(p+2*c)+d;return r&&r.copy(this.origin).addScaledVector(this.direction,m),i&&i.copy(XM).addScaledVector(l1,p),f}intersectSphere(e,n){Nu.subVectors(e.center,this.origin);const r=Nu.dot(this.direction),i=Nu.dot(Nu)-r*r,s=e.radius*e.radius;if(i>s)return null;const o=Math.sqrt(s-i),l=r-o,c=r+o;return c<0?null:l<0?this.at(c,n):this.at(l,n)}intersectsSphere(e){return e.radius<0?!1:this.distanceSqToPoint(e.center)<=e.radius*e.radius}distanceToPlane(e){const n=e.normal.dot(this.direction);if(n===0)return e.distanceToPoint(this.origin)===0?0:null;const r=-(this.origin.dot(e.normal)+e.constant)/n;return r>=0?r:null}intersectPlane(e,n){const r=this.distanceToPlane(e);return r===null?null:this.at(r,n)}intersectsPlane(e){const n=e.distanceToPoint(this.origin);return n===0||e.normal.dot(this.direction)*n<0}intersectBox(e,n){let r,i,s,o,l,c;const d=1/this.direction.x,u=1/this.direction.y,m=1/this.direction.z,p=this.origin;return d>=0?(r=(e.min.x-p.x)*d,i=(e.max.x-p.x)*d):(r=(e.max.x-p.x)*d,i=(e.min.x-p.x)*d),u>=0?(s=(e.min.y-p.y)*u,o=(e.max.y-p.y)*u):(s=(e.max.y-p.y)*u,o=(e.min.y-p.y)*u),r>o||s>i||((s>r||isNaN(r))&&(r=s),(o<i||isNaN(i))&&(i=o),m>=0?(l=(e.min.z-p.z)*m,c=(e.max.z-p.z)*m):(l=(e.max.z-p.z)*m,c=(e.min.z-p.z)*m),r>c||l>i)||((l>r||r!==r)&&(r=l),(c<i||i!==i)&&(i=c),i<0)?null:this.at(r>=0?r:i,n)}intersectsBox(e){return this.intersectBox(e,Nu)!==null}intersectTriangle(e,n,r,i,s){YM.subVectors(n,e),c1.subVectors(r,e),QM.crossVectors(YM,c1);let o=this.direction.dot(QM),l;if(o>0){if(i)return null;l=1}else if(o<0)l=-1,o=-o;else return null;gh.subVectors(this.origin,e);const c=l*this.direction.dot(c1.crossVectors(gh,c1));if(c<0)return null;const d=l*this.direction.dot(YM.cross(gh));if(d<0||c+d>o)return null;const u=-l*gh.dot(QM);return u<0?null:this.at(u/o,s)}applyMatrix4(e){return this.origin.applyMatrix4(e),this.direction.transformDirection(e),this}equals(e){return e.origin.equals(this.origin)&&e.direction.equals(this.direction)}clone(){return new this.constructor().copy(this)}},wi=class vR{constructor(e,n,r,i,s,o,l,c,d,u,m,p,f,x,v,b){vR.prototype.isMatrix4=!0,this.elements=[1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1],e!==void 0&&this.set(e,n,r,i,s,o,l,c,d,u,m,p,f,x,v,b)}set(e,n,r,i,s,o,l,c,d,u,m,p,f,x,v,b){const g=this.elements;return g[0]=e,g[4]=n,g[8]=r,g[12]=i,g[1]=s,g[5]=o,g[9]=l,g[13]=c,g[2]=d,g[6]=u,g[10]=m,g[14]=p,g[3]=f,g[7]=x,g[11]=v,g[15]=b,this}identity(){return this.set(1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1),this}clone(){return new vR().fromArray(this.elements)}copy(e){const n=this.elements,r=e.elements;return n[0]=r[0],n[1]=r[1],n[2]=r[2],n[3]=r[3],n[4]=r[4],n[5]=r[5],n[6]=r[6],n[7]=r[7],n[8]=r[8],n[9]=r[9],n[10]=r[10],n[11]=r[11],n[12]=r[12],n[13]=r[13],n[14]=r[14],n[15]=r[15],this}copyPosition(e){const n=this.elements,r=e.elements;return n[12]=r[12],n[13]=r[13],n[14]=r[14],this}setFromMatrix3(e){const n=e.elements;return this.set(n[0],n[3],n[6],0,n[1],n[4],n[7],0,n[2],n[5],n[8],0,0,0,0,1),this}extractBasis(e,n,r){return e.setFromMatrixColumn(this,0),n.setFromMatrixColumn(this,1),r.setFromMatrixColumn(this,2),this}makeBasis(e,n,r){return this.set(e.x,n.x,r.x,0,e.y,n.y,r.y,0,e.z,n.z,r.z,0,0,0,0,1),this}extractRotation(e){const n=this.elements,r=e.elements,i=1/Ib.setFromMatrixColumn(e,0).length(),s=1/Ib.setFromMatrixColumn(e,1).length(),o=1/Ib.setFromMatrixColumn(e,2).length();return n[0]=r[0]*i,n[1]=r[1]*i,n[2]=r[2]*i,n[3]=0,n[4]=r[4]*s,n[5]=r[5]*s,n[6]=r[6]*s,n[7]=0,n[8]=r[8]*o,n[9]=r[9]*o,n[10]=r[10]*o,n[11]=0,n[12]=0,n[13]=0,n[14]=0,n[15]=1,this}makeRotationFromEuler(e){const n=this.elements,r=e.x,i=e.y,s=e.z,o=Math.cos(r),l=Math.sin(r),c=Math.cos(i),d=Math.sin(i),u=Math.cos(s),m=Math.sin(s);if(e.order==="XYZ"){const p=o*u,f=o*m,x=l*u,v=l*m;n[0]=c*u,n[4]=-c*m,n[8]=d,n[1]=f+x*d,n[5]=p-v*d,n[9]=-l*c,n[2]=v-p*d,n[6]=x+f*d,n[10]=o*c}else if(e.order==="YXZ"){const p=c*u,f=c*m,x=d*u,v=d*m;n[0]=p+v*l,n[4]=x*l-f,n[8]=o*d,n[1]=o*m,n[5]=o*u,n[9]=-l,n[2]=f*l-x,n[6]=v+p*l,n[10]=o*c}else if(e.order==="ZXY"){const p=c*u,f=c*m,x=d*u,v=d*m;n[0]=p-v*l,n[4]=-o*m,n[8]=x+f*l,n[1]=f+x*l,n[5]=o*u,n[9]=v-p*l,n[2]=-o*d,n[6]=l,n[10]=o*c}else if(e.order==="ZYX"){const p=o*u,f=o*m,x=l*u,v=l*m;n[0]=c*u,n[4]=x*d-f,n[8]=p*d+v,n[1]=c*m,n[5]=v*d+p,n[9]=f*d-x,n[2]=-d,n[6]=l*c,n[10]=o*c}else if(e.order==="YZX"){const p=o*c,f=o*d,x=l*c,v=l*d;n[0]=c*u,n[4]=v-p*m,n[8]=x*m+f,n[1]=m,n[5]=o*u,n[9]=-l*u,n[2]=-d*u,n[6]=f*m+x,n[10]=p-v*m}else if(e.order==="XZY"){const p=o*c,f=o*d,x=l*c,v=l*d;n[0]=c*u,n[4]=-m,n[8]=d*u,n[1]=p*m+v,n[5]=o*u,n[9]=f*m-x,n[2]=x*m-f,n[6]=l*u,n[10]=v*m+p}return n[3]=0,n[7]=0,n[11]=0,n[12]=0,n[13]=0,n[14]=0,n[15]=1,this}makeRotationFromQuaternion(e){return this.compose(v0e,e,w0e)}lookAt(e,n,r){const i=this.elements;return el.subVectors(e,n),el.lengthSq()===0&&(el.z=1),el.normalize(),bh.crossVectors(r,el),bh.lengthSq()===0&&(Math.abs(r.z)===1?el.x+=1e-4:el.z+=1e-4,el.normalize(),bh.crossVectors(r,el)),bh.normalize(),d1.crossVectors(el,bh),i[0]=bh.x,i[4]=d1.x,i[8]=el.x,i[1]=bh.y,i[5]=d1.y,i[9]=el.y,i[2]=bh.z,i[6]=d1.z,i[10]=el.z,this}multiply(e){return this.multiplyMatrices(this,e)}premultiply(e){return this.multiplyMatrices(e,this)}multiplyMatrices(e,n){const r=e.elements,i=n.elements,s=this.elements,o=r[0],l=r[4],c=r[8],d=r[12],u=r[1],m=r[5],p=r[9],f=r[13],x=r[2],v=r[6],b=r[10],g=r[14],S=r[3],N=r[7],P=r[11],C=r[15],A=i[0],T=i[4],F=i[8],k=i[12],E=i[1],$=i[5],z=i[9],X=i[13],R=i[2],ne=i[6],re=i[10],J=i[14],ue=i[3],ie=i[7],se=i[11],K=i[15];return s[0]=o*A+l*E+c*R+d*ue,s[4]=o*T+l*$+c*ne+d*ie,s[8]=o*F+l*z+c*re+d*se,s[12]=o*k+l*X+c*J+d*K,s[1]=u*A+m*E+p*R+f*ue,s[5]=u*T+m*$+p*ne+f*ie,s[9]=u*F+m*z+p*re+f*se,s[13]=u*k+m*X+p*J+f*K,s[2]=x*A+v*E+b*R+g*ue,s[6]=x*T+v*$+b*ne+g*ie,s[10]=x*F+v*z+b*re+g*se,s[14]=x*k+v*X+b*J+g*K,s[3]=S*A+N*E+P*R+C*ue,s[7]=S*T+N*$+P*ne+C*ie,s[11]=S*F+N*z+P*re+C*se,s[15]=S*k+N*X+P*J+C*K,this}multiplyScalar(e){const n=this.elements;return n[0]*=e,n[4]*=e,n[8]*=e,n[12]*=e,n[1]*=e,n[5]*=e,n[9]*=e,n[13]*=e,n[2]*=e,n[6]*=e,n[10]*=e,n[14]*=e,n[3]*=e,n[7]*=e,n[11]*=e,n[15]*=e,this}determinant(){const e=this.elements,n=e[0],r=e[4],i=e[8],s=e[12],o=e[1],l=e[5],c=e[9],d=e[13],u=e[2],m=e[6],p=e[10],f=e[14],x=e[3],v=e[7],b=e[11],g=e[15];return x*(+s*c*m-i*d*m-s*l*p+r*d*p+i*l*f-r*c*f)+v*(+n*c*f-n*d*p+s*o*p-i*o*f+i*d*u-s*c*u)+b*(+n*d*m-n*l*f-s*o*m+r*o*f+s*l*u-r*d*u)+g*(-i*l*u-n*c*m+n*l*p+i*o*m-r*o*p+r*c*u)}transpose(){const e=this.elements;let n;return n=e[1],e[1]=e[4],e[4]=n,n=e[2],e[2]=e[8],e[8]=n,n=e[6],e[6]=e[9],e[9]=n,n=e[3],e[3]=e[12],e[12]=n,n=e[7],e[7]=e[13],e[13]=n,n=e[11],e[11]=e[14],e[14]=n,this}setPosition(e,n,r){const i=this.elements;return e.isVector3?(i[12]=e.x,i[13]=e.y,i[14]=e.z):(i[12]=e,i[13]=n,i[14]=r),this}invert(){const e=this.elements,n=e[0],r=e[1],i=e[2],s=e[3],o=e[4],l=e[5],c=e[6],d=e[7],u=e[8],m=e[9],p=e[10],f=e[11],x=e[12],v=e[13],b=e[14],g=e[15],S=m*b*d-v*p*d+v*c*f-l*b*f-m*c*g+l*p*g,N=x*p*d-u*b*d-x*c*f+o*b*f+u*c*g-o*p*g,P=u*v*d-x*m*d+x*l*f-o*v*f-u*l*g+o*m*g,C=x*m*c-u*v*c-x*l*p+o*v*p+u*l*b-o*m*b,A=n*S+r*N+i*P+s*C;if(A===0)return this.set(0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0);const T=1/A;return e[0]=S*T,e[1]=(v*p*s-m*b*s-v*i*f+r*b*f+m*i*g-r*p*g)*T,e[2]=(l*b*s-v*c*s+v*i*d-r*b*d-l*i*g+r*c*g)*T,e[3]=(m*c*s-l*p*s-m*i*d+r*p*d+l*i*f-r*c*f)*T,e[4]=N*T,e[5]=(u*b*s-x*p*s+x*i*f-n*b*f-u*i*g+n*p*g)*T,e[6]=(x*c*s-o*b*s-x*i*d+n*b*d+o*i*g-n*c*g)*T,e[7]=(o*p*s-u*c*s+u*i*d-n*p*d-o*i*f+n*c*f)*T,e[8]=P*T,e[9]=(x*m*s-u*v*s-x*r*f+n*v*f+u*r*g-n*m*g)*T,e[10]=(o*v*s-x*l*s+x*r*d-n*v*d-o*r*g+n*l*g)*T,e[11]=(u*l*s-o*m*s-u*r*d+n*m*d+o*r*f-n*l*f)*T,e[12]=C*T,e[13]=(u*v*i-x*m*i+x*r*p-n*v*p-u*r*b+n*m*b)*T,e[14]=(x*l*i-o*v*i-x*r*c+n*v*c+o*r*b-n*l*b)*T,e[15]=(o*m*i-u*l*i+u*r*c-n*m*c-o*r*p+n*l*p)*T,this}scale(e){const n=this.elements,r=e.x,i=e.y,s=e.z;return n[0]*=r,n[4]*=i,n[8]*=s,n[1]*=r,n[5]*=i,n[9]*=s,n[2]*=r,n[6]*=i,n[10]*=s,n[3]*=r,n[7]*=i,n[11]*=s,this}getMaxScaleOnAxis(){const e=this.elements,n=e[0]*e[0]+e[1]*e[1]+e[2]*e[2],r=e[4]*e[4]+e[5]*e[5]+e[6]*e[6],i=e[8]*e[8]+e[9]*e[9]+e[10]*e[10];return Math.sqrt(Math.max(n,r,i))}makeTranslation(e,n,r){return e.isVector3?this.set(1,0,0,e.x,0,1,0,e.y,0,0,1,e.z,0,0,0,1):this.set(1,0,0,e,0,1,0,n,0,0,1,r,0,0,0,1),this}makeRotationX(e){const n=Math.cos(e),r=Math.sin(e);return this.set(1,0,0,0,0,n,-r,0,0,r,n,0,0,0,0,1),this}makeRotationY(e){const n=Math.cos(e),r=Math.sin(e);return this.set(n,0,r,0,0,1,0,0,-r,0,n,0,0,0,0,1),this}makeRotationZ(e){const n=Math.cos(e),r=Math.sin(e);return this.set(n,-r,0,0,r,n,0,0,0,0,1,0,0,0,0,1),this}makeRotationAxis(e,n){const r=Math.cos(n),i=Math.sin(n),s=1-r,o=e.x,l=e.y,c=e.z,d=s*o,u=s*l;return this.set(d*o+r,d*l-i*c,d*c+i*l,0,d*l+i*c,u*l+r,u*c-i*o,0,d*c-i*l,u*c+i*o,s*c*c+r,0,0,0,0,1),this}makeScale(e,n,r){return this.set(e,0,0,0,0,n,0,0,0,0,r,0,0,0,0,1),this}makeShear(e,n,r,i,s,o){return this.set(1,r,s,0,e,1,o,0,n,i,1,0,0,0,0,1),this}compose(e,n,r){const i=this.elements,s=n._x,o=n._y,l=n._z,c=n._w,d=s+s,u=o+o,m=l+l,p=s*d,f=s*u,x=s*m,v=o*u,b=o*m,g=l*m,S=c*d,N=c*u,P=c*m,C=r.x,A=r.y,T=r.z;return i[0]=(1-(v+g))*C,i[1]=(f+P)*C,i[2]=(x-N)*C,i[3]=0,i[4]=(f-P)*A,i[5]=(1-(p+g))*A,i[6]=(b+S)*A,i[7]=0,i[8]=(x+N)*T,i[9]=(b-S)*T,i[10]=(1-(p+v))*T,i[11]=0,i[12]=e.x,i[13]=e.y,i[14]=e.z,i[15]=1,this}decompose(e,n,r){const i=this.elements;let s=Ib.set(i[0],i[1],i[2]).length();const o=Ib.set(i[4],i[5],i[6]).length(),l=Ib.set(i[8],i[9],i[10]).length();this.determinant()<0&&(s=-s),e.x=i[12],e.y=i[13],e.z=i[14],Tc.copy(this);const d=1/s,u=1/o,m=1/l;return Tc.elements[0]*=d,Tc.elements[1]*=d,Tc.elements[2]*=d,Tc.elements[4]*=u,Tc.elements[5]*=u,Tc.elements[6]*=u,Tc.elements[8]*=m,Tc.elements[9]*=m,Tc.elements[10]*=m,n.setFromRotationMatrix(Tc),r.x=s,r.y=o,r.z=l,this}makePerspective(e,n,r,i,s,o,l=Ed,c=!1){const d=this.elements,u=2*s/(n-e),m=2*s/(r-i),p=(n+e)/(n-e),f=(r+i)/(r-i);let x,v;if(c)x=s/(o-s),v=o*s/(o-s);else if(l===Ed)x=-(o+s)/(o-s),v=-2*o*s/(o-s);else if(l===ON)x=-o/(o-s),v=-o*s/(o-s);else throw new Error("THREE.Matrix4.makePerspective(): Invalid coordinate system: "+l);return d[0]=u,d[4]=0,d[8]=p,d[12]=0,d[1]=0,d[5]=m,d[9]=f,d[13]=0,d[2]=0,d[6]=0,d[10]=x,d[14]=v,d[3]=0,d[7]=0,d[11]=-1,d[15]=0,this}makeOrthographic(e,n,r,i,s,o,l=Ed,c=!1){const d=this.elements,u=2/(n-e),m=2/(r-i),p=-(n+e)/(n-e),f=-(r+i)/(r-i);let x,v;if(c)x=1/(o-s),v=o/(o-s);else if(l===Ed)x=-2/(o-s),v=-(o+s)/(o-s);else if(l===ON)x=-1/(o-s),v=-s/(o-s);else throw new Error("THREE.Matrix4.makeOrthographic(): Invalid coordinate system: "+l);return d[0]=u,d[4]=0,d[8]=0,d[12]=p,d[1]=0,d[5]=m,d[9]=0,d[13]=f,d[2]=0,d[6]=0,d[10]=x,d[14]=v,d[3]=0,d[7]=0,d[11]=0,d[15]=1,this}equals(e){const n=this.elements,r=e.elements;for(let i=0;i<16;i++)if(n[i]!==r[i])return!1;return!0}fromArray(e,n=0){for(let r=0;r<16;r++)this.elements[r]=e[r+n];return this}toArray(e=[],n=0){const r=this.elements;return e[n]=r[0],e[n+1]=r[1],e[n+2]=r[2],e[n+3]=r[3],e[n+4]=r[4],e[n+5]=r[5],e[n+6]=r[6],e[n+7]=r[7],e[n+8]=r[8],e[n+9]=r[9],e[n+10]=r[10],e[n+11]=r[11],e[n+12]=r[12],e[n+13]=r[13],e[n+14]=r[14],e[n+15]=r[15],e}};const Ib=new Nt,Tc=new wi,v0e=new Nt(0,0,0),w0e=new Nt(1,1,1),bh=new Nt,d1=new Nt,el=new Nt,x6=new wi,y6=new Sg;let kp=class KJ{constructor(e=0,n=0,r=0,i=KJ.DEFAULT_ORDER){this.isEuler=!0,this._x=e,this._y=n,this._z=r,this._order=i}get x(){return this._x}set x(e){this._x=e,this._onChangeCallback()}get y(){return this._y}set y(e){this._y=e,this._onChangeCallback()}get z(){return this._z}set z(e){this._z=e,this._onChangeCallback()}get order(){return this._order}set order(e){this._order=e,this._onChangeCallback()}set(e,n,r,i=this._order){return this._x=e,this._y=n,this._z=r,this._order=i,this._onChangeCallback(),this}clone(){return new this.constructor(this._x,this._y,this._z,this._order)}copy(e){return this._x=e._x,this._y=e._y,this._z=e._z,this._order=e._order,this._onChangeCallback(),this}setFromRotationMatrix(e,n=this._order,r=!0){const i=e.elements,s=i[0],o=i[4],l=i[8],c=i[1],d=i[5],u=i[9],m=i[2],p=i[6],f=i[10];switch(n){case"XYZ":this._y=Math.asin(fr(l,-1,1)),Math.abs(l)<.9999999?(this._x=Math.atan2(-u,f),this._z=Math.atan2(-o,s)):(this._x=Math.atan2(p,d),this._z=0);break;case"YXZ":this._x=Math.asin(-fr(u,-1,1)),Math.abs(u)<.9999999?(this._y=Math.atan2(l,f),this._z=Math.atan2(c,d)):(this._y=Math.atan2(-m,s),this._z=0);break;case"ZXY":this._x=Math.asin(fr(p,-1,1)),Math.abs(p)<.9999999?(this._y=Math.atan2(-m,f),this._z=Math.atan2(-o,d)):(this._y=0,this._z=Math.atan2(c,s));break;case"ZYX":this._y=Math.asin(-fr(m,-1,1)),Math.abs(m)<.9999999?(this._x=Math.atan2(p,f),this._z=Math.atan2(c,s)):(this._x=0,this._z=Math.atan2(-o,d));break;case"YZX":this._z=Math.asin(fr(c,-1,1)),Math.abs(c)<.9999999?(this._x=Math.atan2(-u,d),this._y=Math.atan2(-m,s)):(this._x=0,this._y=Math.atan2(l,f));break;case"XZY":this._z=Math.asin(-fr(o,-1,1)),Math.abs(o)<.9999999?(this._x=Math.atan2(p,d),this._y=Math.atan2(l,s)):(this._x=Math.atan2(-u,f),this._y=0);break;default:Hn("Euler: .setFromRotationMatrix() encountered an unknown order: "+n)}return this._order=n,r===!0&&this._onChangeCallback(),this}setFromQuaternion(e,n,r){return x6.makeRotationFromQuaternion(e),this.setFromRotationMatrix(x6,n,r)}setFromVector3(e,n=this._order){return this.set(e.x,e.y,e.z,n)}reorder(e){return y6.setFromEuler(this),this.setFromQuaternion(y6,e)}equals(e){return e._x===this._x&&e._y===this._y&&e._z===this._z&&e._order===this._order}fromArray(e){return this._x=e[0],this._y=e[1],this._z=e[2],e[3]!==void 0&&(this._order=e[3]),this._onChangeCallback(),this}toArray(e=[],n=0){return e[n]=this._x,e[n+1]=this._y,e[n+2]=this._z,e[n+3]=this._order,e}_onChange(e){return this._onChangeCallback=e,this}_onChangeCallback(){}*[Symbol.iterator](){yield this._x,yield this._y,yield this._z,yield this._order}};kp.DEFAULT_ORDER="XYZ";let XJ=class{constructor(){this.mask=1}set(e){this.mask=(1<<e|0)>>>0}enable(e){this.mask|=1<<e|0}enableAll(){this.mask=-1}toggle(e){this.mask^=1<<e|0}disable(e){this.mask&=~(1<<e|0)}disableAll(){this.mask=0}test(e){return(this.mask&e.mask)!==0}isEnabled(e){return(this.mask&(1<<e|0))!==0}},S0e=0;const v6=new Nt,Ob=new Sg,Cu=new wi,u1=new Nt,zv=new Nt,_0e=new Nt,k0e=new Sg,w6=new Nt(1,0,0),S6=new Nt(0,1,0),_6=new Nt(0,0,1),k6={type:"added"},N0e={type:"removed"},zb={type:"childadded",child:null},JM={type:"childremoved",child:null};let gl=class Zk extends Wg{constructor(){super(),this.isObject3D=!0,Object.defineProperty(this,"id",{value:S0e++}),this.uuid=pS(),this.name="",this.type="Object3D",this.parent=null,this.children=[],this.up=Zk.DEFAULT_UP.clone();const e=new Nt,n=new kp,r=new Sg,i=new Nt(1,1,1);function s(){r.setFromEuler(n,!1)}function o(){n.setFromQuaternion(r,void 0,!1)}n._onChange(s),r._onChange(o),Object.defineProperties(this,{position:{configurable:!0,enumerable:!0,value:e},rotation:{configurable:!0,enumerable:!0,value:n},quaternion:{configurable:!0,enumerable:!0,value:r},scale:{configurable:!0,enumerable:!0,value:i},modelViewMatrix:{value:new wi},normalMatrix:{value:new ar}}),this.matrix=new wi,this.matrixWorld=new wi,this.matrixAutoUpdate=Zk.DEFAULT_MATRIX_AUTO_UPDATE,this.matrixWorldAutoUpdate=Zk.DEFAULT_MATRIX_WORLD_AUTO_UPDATE,this.matrixWorldNeedsUpdate=!1,this.layers=new XJ,this.visible=!0,this.castShadow=!1,this.receiveShadow=!1,this.frustumCulled=!0,this.renderOrder=0,this.animations=[],this.customDepthMaterial=void 0,this.customDistanceMaterial=void 0,this.userData={}}onBeforeShadow(){}onAfterShadow(){}onBeforeRender(){}onAfterRender(){}applyMatrix4(e){this.matrixAutoUpdate&&this.updateMatrix(),this.matrix.premultiply(e),this.matrix.decompose(this.position,this.quaternion,this.scale)}applyQuaternion(e){return this.quaternion.premultiply(e),this}setRotationFromAxisAngle(e,n){this.quaternion.setFromAxisAngle(e,n)}setRotationFromEuler(e){this.quaternion.setFromEuler(e,!0)}setRotationFromMatrix(e){this.quaternion.setFromRotationMatrix(e)}setRotationFromQuaternion(e){this.quaternion.copy(e)}rotateOnAxis(e,n){return Ob.setFromAxisAngle(e,n),this.quaternion.multiply(Ob),this}rotateOnWorldAxis(e,n){return Ob.setFromAxisAngle(e,n),this.quaternion.premultiply(Ob),this}rotateX(e){return this.rotateOnAxis(w6,e)}rotateY(e){return this.rotateOnAxis(S6,e)}rotateZ(e){return this.rotateOnAxis(_6,e)}translateOnAxis(e,n){return v6.copy(e).applyQuaternion(this.quaternion),this.position.add(v6.multiplyScalar(n)),this}translateX(e){return this.translateOnAxis(w6,e)}translateY(e){return this.translateOnAxis(S6,e)}translateZ(e){return this.translateOnAxis(_6,e)}localToWorld(e){return this.updateWorldMatrix(!0,!1),e.applyMatrix4(this.matrixWorld)}worldToLocal(e){return this.updateWorldMatrix(!0,!1),e.applyMatrix4(Cu.copy(this.matrixWorld).invert())}lookAt(e,n,r){e.isVector3?u1.copy(e):u1.set(e,n,r);const i=this.parent;this.updateWorldMatrix(!0,!1),zv.setFromMatrixPosition(this.matrixWorld),this.isCamera||this.isLight?Cu.lookAt(zv,u1,this.up):Cu.lookAt(u1,zv,this.up),this.quaternion.setFromRotationMatrix(Cu),i&&(Cu.extractRotation(i.matrixWorld),Ob.setFromRotationMatrix(Cu),this.quaternion.premultiply(Ob.invert()))}add(e){if(arguments.length>1){for(let n=0;n<arguments.length;n++)this.add(arguments[n]);return this}return e===this?(si("Object3D.add: object can't be added as a child of itself.",e),this):(e&&e.isObject3D?(e.removeFromParent(),e.parent=this,this.children.push(e),e.dispatchEvent(k6),zb.child=e,this.dispatchEvent(zb),zb.child=null):si("Object3D.add: object not an instance of THREE.Object3D.",e),this)}remove(e){if(arguments.length>1){for(let r=0;r<arguments.length;r++)this.remove(arguments[r]);return this}const n=this.children.indexOf(e);return n!==-1&&(e.parent=null,this.children.splice(n,1),e.dispatchEvent(N0e),JM.child=e,this.dispatchEvent(JM),JM.child=null),this}removeFromParent(){const e=this.parent;return e!==null&&e.remove(this),this}clear(){return this.remove(...this.children)}attach(e){return this.updateWorldMatrix(!0,!1),Cu.copy(this.matrixWorld).invert(),e.parent!==null&&(e.parent.updateWorldMatrix(!0,!1),Cu.multiply(e.parent.matrixWorld)),e.applyMatrix4(Cu),e.removeFromParent(),e.parent=this,this.children.push(e),e.updateWorldMatrix(!1,!0),e.dispatchEvent(k6),zb.child=e,this.dispatchEvent(zb),zb.child=null,this}getObjectById(e){return this.getObjectByProperty("id",e)}getObjectByName(e){return this.getObjectByProperty("name",e)}getObjectByProperty(e,n){if(this[e]===n)return this;for(let r=0,i=this.children.length;r<i;r++){const o=this.children[r].getObjectByProperty(e,n);if(o!==void 0)return o}}getObjectsByProperty(e,n,r=[]){this[e]===n&&r.push(this);const i=this.children;for(let s=0,o=i.length;s<o;s++)i[s].getObjectsByProperty(e,n,r);return r}getWorldPosition(e){return this.updateWorldMatrix(!0,!1),e.setFromMatrixPosition(this.matrixWorld)}getWorldQuaternion(e){return this.updateWorldMatrix(!0,!1),this.matrixWorld.decompose(zv,e,_0e),e}getWorldScale(e){return this.updateWorldMatrix(!0,!1),this.matrixWorld.decompose(zv,k0e,e),e}getWorldDirection(e){this.updateWorldMatrix(!0,!1);const n=this.matrixWorld.elements;return e.set(n[8],n[9],n[10]).normalize()}raycast(){}traverse(e){e(this);const n=this.children;for(let r=0,i=n.length;r<i;r++)n[r].traverse(e)}traverseVisible(e){if(this.visible===!1)return;e(this);const n=this.children;for(let r=0,i=n.length;r<i;r++)n[r].traverseVisible(e)}traverseAncestors(e){const n=this.parent;n!==null&&(e(n),n.traverseAncestors(e))}updateMatrix(){this.matrix.compose(this.position,this.quaternion,this.scale),this.matrixWorldNeedsUpdate=!0}updateMatrixWorld(e){this.matrixAutoUpdate&&this.updateMatrix(),(this.matrixWorldNeedsUpdate||e)&&(this.matrixWorldAutoUpdate===!0&&(this.parent===null?this.matrixWorld.copy(this.matrix):this.matrixWorld.multiplyMatrices(this.parent.matrixWorld,this.matrix)),this.matrixWorldNeedsUpdate=!1,e=!0);const n=this.children;for(let r=0,i=n.length;r<i;r++)n[r].updateMatrixWorld(e)}updateWorldMatrix(e,n){const r=this.parent;if(e===!0&&r!==null&&r.updateWorldMatrix(!0,!1),this.matrixAutoUpdate&&this.updateMatrix(),this.matrixWorldAutoUpdate===!0&&(this.parent===null?this.matrixWorld.copy(this.matrix):this.matrixWorld.multiplyMatrices(this.parent.matrixWorld,this.matrix)),n===!0){const i=this.children;for(let s=0,o=i.length;s<o;s++)i[s].updateWorldMatrix(!1,!0)}}toJSON(e){const n=e===void 0||typeof e=="string",r={};n&&(e={geometries:{},materials:{},textures:{},images:{},shapes:{},skeletons:{},animations:{},nodes:{}},r.metadata={version:4.7,type:"Object",generator:"Object3D.toJSON"});const i={};i.uuid=this.uuid,i.type=this.type,this.name!==""&&(i.name=this.name),this.castShadow===!0&&(i.castShadow=!0),this.receiveShadow===!0&&(i.receiveShadow=!0),this.visible===!1&&(i.visible=!1),this.frustumCulled===!1&&(i.frustumCulled=!1),this.renderOrder!==0&&(i.renderOrder=this.renderOrder),Object.keys(this.userData).length>0&&(i.userData=this.userData),i.layers=this.layers.mask,i.matrix=this.matrix.toArray(),i.up=this.up.toArray(),this.matrixAutoUpdate===!1&&(i.matrixAutoUpdate=!1),this.isInstancedMesh&&(i.type="InstancedMesh",i.count=this.count,i.instanceMatrix=this.instanceMatrix.toJSON(),this.instanceColor!==null&&(i.instanceColor=this.instanceColor.toJSON())),this.isBatchedMesh&&(i.type="BatchedMesh",i.perObjectFrustumCulled=this.perObjectFrustumCulled,i.sortObjects=this.sortObjects,i.drawRanges=this._drawRanges,i.reservedRanges=this._reservedRanges,i.geometryInfo=this._geometryInfo.map(l=>({...l,boundingBox:l.boundingBox?l.boundingBox.toJSON():void 0,boundingSphere:l.boundingSphere?l.boundingSphere.toJSON():void 0})),i.instanceInfo=this._instanceInfo.map(l=>({...l})),i.availableInstanceIds=this._availableInstanceIds.slice(),i.availableGeometryIds=this._availableGeometryIds.slice(),i.nextIndexStart=this._nextIndexStart,i.nextVertexStart=this._nextVertexStart,i.geometryCount=this._geometryCount,i.maxInstanceCount=this._maxInstanceCount,i.maxVertexCount=this._maxVertexCount,i.maxIndexCount=this._maxIndexCount,i.geometryInitialized=this._geometryInitialized,i.matricesTexture=this._matricesTexture.toJSON(e),i.indirectTexture=this._indirectTexture.toJSON(e),this._colorsTexture!==null&&(i.colorsTexture=this._colorsTexture.toJSON(e)),this.boundingSphere!==null&&(i.boundingSphere=this.boundingSphere.toJSON()),this.boundingBox!==null&&(i.boundingBox=this.boundingBox.toJSON()));function s(l,c){return l[c.uuid]===void 0&&(l[c.uuid]=c.toJSON(e)),c.uuid}if(this.isScene)this.background&&(this.background.isColor?i.background=this.background.toJSON():this.background.isTexture&&(i.background=this.background.toJSON(e).uuid)),this.environment&&this.environment.isTexture&&this.environment.isRenderTargetTexture!==!0&&(i.environment=this.environment.toJSON(e).uuid);else if(this.isMesh||this.isLine||this.isPoints){i.geometry=s(e.geometries,this.geometry);const l=this.geometry.parameters;if(l!==void 0&&l.shapes!==void 0){const c=l.shapes;if(Array.isArray(c))for(let d=0,u=c.length;d<u;d++){const m=c[d];s(e.shapes,m)}else s(e.shapes,c)}}if(this.isSkinnedMesh&&(i.bindMode=this.bindMode,i.bindMatrix=this.bindMatrix.toArray(),this.skeleton!==void 0&&(s(e.skeletons,this.skeleton),i.skeleton=this.skeleton.uuid)),this.material!==void 0)if(Array.isArray(this.material)){const l=[];for(let c=0,d=this.material.length;c<d;c++)l.push(s(e.materials,this.material[c]));i.material=l}else i.material=s(e.materials,this.material);if(this.children.length>0){i.children=[];for(let l=0;l<this.children.length;l++)i.children.push(this.children[l].toJSON(e).object)}if(this.animations.length>0){i.animations=[];for(let l=0;l<this.animations.length;l++){const c=this.animations[l];i.animations.push(s(e.animations,c))}}if(n){const l=o(e.geometries),c=o(e.materials),d=o(e.textures),u=o(e.images),m=o(e.shapes),p=o(e.skeletons),f=o(e.animations),x=o(e.nodes);l.length>0&&(r.geometries=l),c.length>0&&(r.materials=c),d.length>0&&(r.textures=d),u.length>0&&(r.images=u),m.length>0&&(r.shapes=m),p.length>0&&(r.skeletons=p),f.length>0&&(r.animations=f),x.length>0&&(r.nodes=x)}return r.object=i,r;function o(l){const c=[];for(const d in l){const u=l[d];delete u.metadata,c.push(u)}return c}}clone(e){return new this.constructor().copy(this,e)}copy(e,n=!0){if(this.name=e.name,this.up.copy(e.up),this.position.copy(e.position),this.rotation.order=e.rotation.order,this.quaternion.copy(e.quaternion),this.scale.copy(e.scale),this.matrix.copy(e.matrix),this.matrixWorld.copy(e.matrixWorld),this.matrixAutoUpdate=e.matrixAutoUpdate,this.matrixWorldAutoUpdate=e.matrixWorldAutoUpdate,this.matrixWorldNeedsUpdate=e.matrixWorldNeedsUpdate,this.layers.mask=e.layers.mask,this.visible=e.visible,this.castShadow=e.castShadow,this.receiveShadow=e.receiveShadow,this.frustumCulled=e.frustumCulled,this.renderOrder=e.renderOrder,this.animations=e.animations.slice(),this.userData=JSON.parse(JSON.stringify(e.userData)),n===!0)for(let r=0;r<e.children.length;r++){const i=e.children[r];this.add(i.clone())}return this}};gl.DEFAULT_UP=new Nt(0,1,0);gl.DEFAULT_MATRIX_AUTO_UPDATE=!0;gl.DEFAULT_MATRIX_WORLD_AUTO_UPDATE=!0;const Ac=new Nt,Pu=new Nt,ZM=new Nt,Tu=new Nt,Ub=new Nt,Bb=new Nt,N6=new Nt,eE=new Nt,tE=new Nt,nE=new Nt,rE=new bi,aE=new bi,iE=new bi;let Uv=class wx{constructor(e=new Nt,n=new Nt,r=new Nt){this.a=e,this.b=n,this.c=r}static getNormal(e,n,r,i){i.subVectors(r,n),Ac.subVectors(e,n),i.cross(Ac);const s=i.lengthSq();return s>0?i.multiplyScalar(1/Math.sqrt(s)):i.set(0,0,0)}static getBarycoord(e,n,r,i,s){Ac.subVectors(i,n),Pu.subVectors(r,n),ZM.subVectors(e,n);const o=Ac.dot(Ac),l=Ac.dot(Pu),c=Ac.dot(ZM),d=Pu.dot(Pu),u=Pu.dot(ZM),m=o*d-l*l;if(m===0)return s.set(0,0,0),null;const p=1/m,f=(d*c-l*u)*p,x=(o*u-l*c)*p;return s.set(1-f-x,x,f)}static containsPoint(e,n,r,i){return this.getBarycoord(e,n,r,i,Tu)===null?!1:Tu.x>=0&&Tu.y>=0&&Tu.x+Tu.y<=1}static getInterpolation(e,n,r,i,s,o,l,c){return this.getBarycoord(e,n,r,i,Tu)===null?(c.x=0,c.y=0,"z"in c&&(c.z=0),"w"in c&&(c.w=0),null):(c.setScalar(0),c.addScaledVector(s,Tu.x),c.addScaledVector(o,Tu.y),c.addScaledVector(l,Tu.z),c)}static getInterpolatedAttribute(e,n,r,i,s,o){return rE.setScalar(0),aE.setScalar(0),iE.setScalar(0),rE.fromBufferAttribute(e,n),aE.fromBufferAttribute(e,r),iE.fromBufferAttribute(e,i),o.setScalar(0),o.addScaledVector(rE,s.x),o.addScaledVector(aE,s.y),o.addScaledVector(iE,s.z),o}static isFrontFacing(e,n,r,i){return Ac.subVectors(r,n),Pu.subVectors(e,n),Ac.cross(Pu).dot(i)<0}set(e,n,r){return this.a.copy(e),this.b.copy(n),this.c.copy(r),this}setFromPointsAndIndices(e,n,r,i){return this.a.copy(e[n]),this.b.copy(e[r]),this.c.copy(e[i]),this}setFromAttributeAndIndices(e,n,r,i){return this.a.fromBufferAttribute(e,n),this.b.fromBufferAttribute(e,r),this.c.fromBufferAttribute(e,i),this}clone(){return new this.constructor().copy(this)}copy(e){return this.a.copy(e.a),this.b.copy(e.b),this.c.copy(e.c),this}getArea(){return Ac.subVectors(this.c,this.b),Pu.subVectors(this.a,this.b),Ac.cross(Pu).length()*.5}getMidpoint(e){return e.addVectors(this.a,this.b).add(this.c).multiplyScalar(1/3)}getNormal(e){return wx.getNormal(this.a,this.b,this.c,e)}getPlane(e){return e.setFromCoplanarPoints(this.a,this.b,this.c)}getBarycoord(e,n){return wx.getBarycoord(e,this.a,this.b,this.c,n)}getInterpolation(e,n,r,i,s){return wx.getInterpolation(e,this.a,this.b,this.c,n,r,i,s)}containsPoint(e){return wx.containsPoint(e,this.a,this.b,this.c)}isFrontFacing(e){return wx.isFrontFacing(this.a,this.b,this.c,e)}intersectsBox(e){return e.intersectsTriangle(this)}closestPointToPoint(e,n){const r=this.a,i=this.b,s=this.c;let o,l;Ub.subVectors(i,r),Bb.subVectors(s,r),eE.subVectors(e,r);const c=Ub.dot(eE),d=Bb.dot(eE);if(c<=0&&d<=0)return n.copy(r);tE.subVectors(e,i);const u=Ub.dot(tE),m=Bb.dot(tE);if(u>=0&&m<=u)return n.copy(i);const p=c*m-u*d;if(p<=0&&c>=0&&u<=0)return o=c/(c-u),n.copy(r).addScaledVector(Ub,o);nE.subVectors(e,s);const f=Ub.dot(nE),x=Bb.dot(nE);if(x>=0&&f<=x)return n.copy(s);const v=f*d-c*x;if(v<=0&&d>=0&&x<=0)return l=d/(d-x),n.copy(r).addScaledVector(Bb,l);const b=u*x-f*m;if(b<=0&&m-u>=0&&f-x>=0)return N6.subVectors(s,i),l=(m-u)/(m-u+(f-x)),n.copy(i).addScaledVector(N6,l);const g=1/(b+v+p);return o=v*g,l=p*g,n.copy(r).addScaledVector(Ub,o).addScaledVector(Bb,l)}equals(e){return e.a.equals(this.a)&&e.b.equals(this.b)&&e.c.equals(this.c)}};const YJ={aliceblue:15792383,antiquewhite:16444375,aqua:65535,aquamarine:8388564,azure:15794175,beige:16119260,bisque:16770244,black:0,blanchedalmond:16772045,blue:255,blueviolet:9055202,brown:10824234,burlywood:14596231,cadetblue:6266528,chartreuse:8388352,chocolate:13789470,coral:16744272,cornflowerblue:6591981,cornsilk:16775388,crimson:14423100,cyan:65535,darkblue:139,darkcyan:35723,darkgoldenrod:12092939,darkgray:11119017,darkgreen:25600,darkgrey:11119017,darkkhaki:12433259,darkmagenta:9109643,darkolivegreen:5597999,darkorange:16747520,darkorchid:10040012,darkred:9109504,darksalmon:15308410,darkseagreen:9419919,darkslateblue:4734347,darkslategray:3100495,darkslategrey:3100495,darkturquoise:52945,darkviolet:9699539,deeppink:16716947,deepskyblue:49151,dimgray:6908265,dimgrey:6908265,dodgerblue:2003199,firebrick:11674146,floralwhite:16775920,forestgreen:2263842,fuchsia:16711935,gainsboro:14474460,ghostwhite:16316671,gold:16766720,goldenrod:14329120,gray:8421504,green:32768,greenyellow:11403055,grey:8421504,honeydew:15794160,hotpink:16738740,indianred:13458524,indigo:4915330,ivory:16777200,khaki:15787660,lavender:15132410,lavenderblush:16773365,lawngreen:8190976,lemonchiffon:16775885,lightblue:11393254,lightcoral:15761536,lightcyan:14745599,lightgoldenrodyellow:16448210,lightgray:13882323,lightgreen:9498256,lightgrey:13882323,lightpink:16758465,lightsalmon:16752762,lightseagreen:2142890,lightskyblue:8900346,lightslategray:7833753,lightslategrey:7833753,lightsteelblue:11584734,lightyellow:16777184,lime:65280,limegreen:3329330,linen:16445670,magenta:16711935,maroon:8388608,mediumaquamarine:6737322,mediumblue:205,mediumorchid:12211667,mediumpurple:9662683,mediumseagreen:3978097,mediumslateblue:8087790,mediumspringgreen:64154,mediumturquoise:4772300,mediumvioletred:13047173,midnightblue:1644912,mintcream:16121850,mistyrose:16770273,moccasin:16770229,navajowhite:16768685,navy:128,oldlace:16643558,olive:8421376,olivedrab:7048739,orange:16753920,orangered:16729344,orchid:14315734,palegoldenrod:15657130,palegreen:10025880,paleturquoise:11529966,palevioletred:14381203,papayawhip:16773077,peachpuff:16767673,peru:13468991,pink:16761035,plum:14524637,powderblue:11591910,purple:8388736,rebeccapurple:6697881,red:16711680,rosybrown:12357519,royalblue:4286945,saddlebrown:9127187,salmon:16416882,sandybrown:16032864,seagreen:3050327,seashell:16774638,sienna:10506797,silver:12632256,skyblue:8900331,slateblue:6970061,slategray:7372944,slategrey:7372944,snow:16775930,springgreen:65407,steelblue:4620980,tan:13808780,teal:32896,thistle:14204888,tomato:16737095,turquoise:4251856,violet:15631086,wheat:16113331,white:16777215,whitesmoke:16119285,yellow:16776960,yellowgreen:10145074},xh={h:0,s:0,l:0},m1={h:0,s:0,l:0};function sE(t,e,n){return n<0&&(n+=1),n>1&&(n-=1),n<1/6?t+(e-t)*6*n:n<1/2?e:n<2/3?t+(e-t)*6*(2/3-n):t}let ir=class{constructor(e,n,r){return this.isColor=!0,this.r=1,this.g=1,this.b=1,this.set(e,n,r)}set(e,n,r){if(n===void 0&&r===void 0){const i=e;i&&i.isColor?this.copy(i):typeof i=="number"?this.setHex(i):typeof i=="string"&&this.setStyle(i)}else this.setRGB(e,n,r);return this}setScalar(e){return this.r=e,this.g=e,this.b=e,this}setHex(e,n=al){return e=Math.floor(e),this.r=(e>>16&255)/255,this.g=(e>>8&255)/255,this.b=(e&255)/255,Fr.colorSpaceToWorking(this,n),this}setRGB(e,n,r,i=Fr.workingColorSpace){return this.r=e,this.g=n,this.b=r,Fr.colorSpaceToWorking(this,i),this}setHSL(e,n,r,i=Fr.workingColorSpace){if(e=u0e(e,1),n=fr(n,0,1),r=fr(r,0,1),n===0)this.r=this.g=this.b=r;else{const s=r<=.5?r*(1+n):r+n-r*n,o=2*r-s;this.r=sE(o,s,e+1/3),this.g=sE(o,s,e),this.b=sE(o,s,e-1/3)}return Fr.colorSpaceToWorking(this,i),this}setStyle(e,n=al){function r(s){s!==void 0&&parseFloat(s)<1&&Hn("Color: Alpha component of "+e+" will be ignored.")}let i;if(i=/^(\w+)\(([^\)]*)\)/.exec(e)){let s;const o=i[1],l=i[2];switch(o){case"rgb":case"rgba":if(s=/^\s*(\d+)\s*,\s*(\d+)\s*,\s*(\d+)\s*(?:,\s*(\d*\.?\d+)\s*)?$/.exec(l))return r(s[4]),this.setRGB(Math.min(255,parseInt(s[1],10))/255,Math.min(255,parseInt(s[2],10))/255,Math.min(255,parseInt(s[3],10))/255,n);if(s=/^\s*(\d+)\%\s*,\s*(\d+)\%\s*,\s*(\d+)\%\s*(?:,\s*(\d*\.?\d+)\s*)?$/.exec(l))return r(s[4]),this.setRGB(Math.min(100,parseInt(s[1],10))/100,Math.min(100,parseInt(s[2],10))/100,Math.min(100,parseInt(s[3],10))/100,n);break;case"hsl":case"hsla":if(s=/^\s*(\d*\.?\d+)\s*,\s*(\d*\.?\d+)\%\s*,\s*(\d*\.?\d+)\%\s*(?:,\s*(\d*\.?\d+)\s*)?$/.exec(l))return r(s[4]),this.setHSL(parseFloat(s[1])/360,parseFloat(s[2])/100,parseFloat(s[3])/100,n);break;default:Hn("Color: Unknown color model "+e)}}else if(i=/^\#([A-Fa-f\d]+)$/.exec(e)){const s=i[1],o=s.length;if(o===3)return this.setRGB(parseInt(s.charAt(0),16)/15,parseInt(s.charAt(1),16)/15,parseInt(s.charAt(2),16)/15,n);if(o===6)return this.setHex(parseInt(s,16),n);Hn("Color: Invalid hex color "+e)}else if(e&&e.length>0)return this.setColorName(e,n);return this}setColorName(e,n=al){const r=YJ[e.toLowerCase()];return r!==void 0?this.setHex(r,n):Hn("Color: Unknown color "+e),this}clone(){return new this.constructor(this.r,this.g,this.b)}copy(e){return this.r=e.r,this.g=e.g,this.b=e.b,this}copySRGBToLinear(e){return this.r=um(e.r),this.g=um(e.g),this.b=um(e.b),this}copyLinearToSRGB(e){return this.r=zx(e.r),this.g=zx(e.g),this.b=zx(e.b),this}convertSRGBToLinear(){return this.copySRGBToLinear(this),this}convertLinearToSRGB(){return this.copyLinearToSRGB(this),this}getHex(e=al){return Fr.workingToColorSpace(Rs.copy(this),e),Math.round(fr(Rs.r*255,0,255))*65536+Math.round(fr(Rs.g*255,0,255))*256+Math.round(fr(Rs.b*255,0,255))}getHexString(e=al){return("000000"+this.getHex(e).toString(16)).slice(-6)}getHSL(e,n=Fr.workingColorSpace){Fr.workingToColorSpace(Rs.copy(this),n);const r=Rs.r,i=Rs.g,s=Rs.b,o=Math.max(r,i,s),l=Math.min(r,i,s);let c,d;const u=(l+o)/2;if(l===o)c=0,d=0;else{const m=o-l;switch(d=u<=.5?m/(o+l):m/(2-o-l),o){case r:c=(i-s)/m+(i<s?6:0);break;case i:c=(s-r)/m+2;break;case s:c=(r-i)/m+4;break}c/=6}return e.h=c,e.s=d,e.l=u,e}getRGB(e,n=Fr.workingColorSpace){return Fr.workingToColorSpace(Rs.copy(this),n),e.r=Rs.r,e.g=Rs.g,e.b=Rs.b,e}getStyle(e=al){Fr.workingToColorSpace(Rs.copy(this),e);const n=Rs.r,r=Rs.g,i=Rs.b;return e!==al?`color(${e} ${n.toFixed(3)} ${r.toFixed(3)} ${i.toFixed(3)})`:`rgb(${Math.round(n*255)},${Math.round(r*255)},${Math.round(i*255)})`}offsetHSL(e,n,r){return this.getHSL(xh),this.setHSL(xh.h+e,xh.s+n,xh.l+r)}add(e){return this.r+=e.r,this.g+=e.g,this.b+=e.b,this}addColors(e,n){return this.r=e.r+n.r,this.g=e.g+n.g,this.b=e.b+n.b,this}addScalar(e){return this.r+=e,this.g+=e,this.b+=e,this}sub(e){return this.r=Math.max(0,this.r-e.r),this.g=Math.max(0,this.g-e.g),this.b=Math.max(0,this.b-e.b),this}multiply(e){return this.r*=e.r,this.g*=e.g,this.b*=e.b,this}multiplyScalar(e){return this.r*=e,this.g*=e,this.b*=e,this}lerp(e,n){return this.r+=(e.r-this.r)*n,this.g+=(e.g-this.g)*n,this.b+=(e.b-this.b)*n,this}lerpColors(e,n,r){return this.r=e.r+(n.r-e.r)*r,this.g=e.g+(n.g-e.g)*r,this.b=e.b+(n.b-e.b)*r,this}lerpHSL(e,n){this.getHSL(xh),e.getHSL(m1);const r=HM(xh.h,m1.h,n),i=HM(xh.s,m1.s,n),s=HM(xh.l,m1.l,n);return this.setHSL(r,i,s),this}setFromVector3(e){return this.r=e.x,this.g=e.y,this.b=e.z,this}applyMatrix3(e){const n=this.r,r=this.g,i=this.b,s=e.elements;return this.r=s[0]*n+s[3]*r+s[6]*i,this.g=s[1]*n+s[4]*r+s[7]*i,this.b=s[2]*n+s[5]*r+s[8]*i,this}equals(e){return e.r===this.r&&e.g===this.g&&e.b===this.b}fromArray(e,n=0){return this.r=e[n],this.g=e[n+1],this.b=e[n+2],this}toArray(e=[],n=0){return e[n]=this.r,e[n+1]=this.g,e[n+2]=this.b,e}fromBufferAttribute(e,n){return this.r=e.getX(n),this.g=e.getY(n),this.b=e.getZ(n),this}toJSON(){return this.getHex()}*[Symbol.iterator](){yield this.r,yield this.g,yield this.b}};const Rs=new ir;ir.NAMES=YJ;let C0e=0,jy=class extends Wg{constructor(){super(),this.isMaterial=!0,Object.defineProperty(this,"id",{value:C0e++}),this.uuid=pS(),this.name="",this.type="Material",this.blending=Ox,this.side=_p,this.vertexColors=!1,this.opacity=1,this.transparent=!1,this.alphaHash=!1,this.blendSrc=EF,this.blendDst=DF,this.blendEquation=Df,this.blendSrcAlpha=null,this.blendDstAlpha=null,this.blendEquationAlpha=null,this.blendColor=new ir(0,0,0),this.blendAlpha=0,this.depthFunc=Jx,this.depthTest=!0,this.depthWrite=!0,this.stencilWriteMask=255,this.stencilFunc=d6,this.stencilRef=0,this.stencilFuncMask=255,this.stencilFail=Eb,this.stencilZFail=Eb,this.stencilZPass=Eb,this.stencilWrite=!1,this.clippingPlanes=null,this.clipIntersection=!1,this.clipShadows=!1,this.shadowSide=null,this.colorWrite=!0,this.precision=null,this.polygonOffset=!1,this.polygonOffsetFactor=0,this.polygonOffsetUnits=0,this.dithering=!1,this.alphaToCoverage=!1,this.premultipliedAlpha=!1,this.forceSinglePass=!1,this.allowOverride=!0,this.visible=!0,this.toneMapped=!0,this.userData={},this.version=0,this._alphaTest=0}get alphaTest(){return this._alphaTest}set alphaTest(e){this._alphaTest>0!=e>0&&this.version++,this._alphaTest=e}onBeforeRender(){}onBeforeCompile(){}customProgramCacheKey(){return this.onBeforeCompile.toString()}setValues(e){if(e!==void 0)for(const n in e){const r=e[n];if(r===void 0){Hn(`Material: parameter '${n}' has value of undefined.`);continue}const i=this[n];if(i===void 0){Hn(`Material: '${n}' is not a property of THREE.${this.type}.`);continue}i&&i.isColor?i.set(r):i&&i.isVector3&&r&&r.isVector3?i.copy(r):this[n]=r}}toJSON(e){const n=e===void 0||typeof e=="string";n&&(e={textures:{},images:{}});const r={metadata:{version:4.7,type:"Material",generator:"Material.toJSON"}};r.uuid=this.uuid,r.type=this.type,this.name!==""&&(r.name=this.name),this.color&&this.color.isColor&&(r.color=this.color.getHex()),this.roughness!==void 0&&(r.roughness=this.roughness),this.metalness!==void 0&&(r.metalness=this.metalness),this.sheen!==void 0&&(r.sheen=this.sheen),this.sheenColor&&this.sheenColor.isColor&&(r.sheenColor=this.sheenColor.getHex()),this.sheenRoughness!==void 0&&(r.sheenRoughness=this.sheenRoughness),this.emissive&&this.emissive.isColor&&(r.emissive=this.emissive.getHex()),this.emissiveIntensity!==void 0&&this.emissiveIntensity!==1&&(r.emissiveIntensity=this.emissiveIntensity),this.specular&&this.specular.isColor&&(r.specular=this.specular.getHex()),this.specularIntensity!==void 0&&(r.specularIntensity=this.specularIntensity),this.specularColor&&this.specularColor.isColor&&(r.specularColor=this.specularColor.getHex()),this.shininess!==void 0&&(r.shininess=this.shininess),this.clearcoat!==void 0&&(r.clearcoat=this.clearcoat),this.clearcoatRoughness!==void 0&&(r.clearcoatRoughness=this.clearcoatRoughness),this.clearcoatMap&&this.clearcoatMap.isTexture&&(r.clearcoatMap=this.clearcoatMap.toJSON(e).uuid),this.clearcoatRoughnessMap&&this.clearcoatRoughnessMap.isTexture&&(r.clearcoatRoughnessMap=this.clearcoatRoughnessMap.toJSON(e).uuid),this.clearcoatNormalMap&&this.clearcoatNormalMap.isTexture&&(r.clearcoatNormalMap=this.clearcoatNormalMap.toJSON(e).uuid,r.clearcoatNormalScale=this.clearcoatNormalScale.toArray()),this.sheenColorMap&&this.sheenColorMap.isTexture&&(r.sheenColorMap=this.sheenColorMap.toJSON(e).uuid),this.sheenRoughnessMap&&this.sheenRoughnessMap.isTexture&&(r.sheenRoughnessMap=this.sheenRoughnessMap.toJSON(e).uuid),this.dispersion!==void 0&&(r.dispersion=this.dispersion),this.iridescence!==void 0&&(r.iridescence=this.iridescence),this.iridescenceIOR!==void 0&&(r.iridescenceIOR=this.iridescenceIOR),this.iridescenceThicknessRange!==void 0&&(r.iridescenceThicknessRange=this.iridescenceThicknessRange),this.iridescenceMap&&this.iridescenceMap.isTexture&&(r.iridescenceMap=this.iridescenceMap.toJSON(e).uuid),this.iridescenceThicknessMap&&this.iridescenceThicknessMap.isTexture&&(r.iridescenceThicknessMap=this.iridescenceThicknessMap.toJSON(e).uuid),this.anisotropy!==void 0&&(r.anisotropy=this.anisotropy),this.anisotropyRotation!==void 0&&(r.anisotropyRotation=this.anisotropyRotation),this.anisotropyMap&&this.anisotropyMap.isTexture&&(r.anisotropyMap=this.anisotropyMap.toJSON(e).uuid),this.map&&this.map.isTexture&&(r.map=this.map.toJSON(e).uuid),this.matcap&&this.matcap.isTexture&&(r.matcap=this.matcap.toJSON(e).uuid),this.alphaMap&&this.alphaMap.isTexture&&(r.alphaMap=this.alphaMap.toJSON(e).uuid),this.lightMap&&this.lightMap.isTexture&&(r.lightMap=this.lightMap.toJSON(e).uuid,r.lightMapIntensity=this.lightMapIntensity),this.aoMap&&this.aoMap.isTexture&&(r.aoMap=this.aoMap.toJSON(e).uuid,r.aoMapIntensity=this.aoMapIntensity),this.bumpMap&&this.bumpMap.isTexture&&(r.bumpMap=this.bumpMap.toJSON(e).uuid,r.bumpScale=this.bumpScale),this.normalMap&&this.normalMap.isTexture&&(r.normalMap=this.normalMap.toJSON(e).uuid,r.normalMapType=this.normalMapType,r.normalScale=this.normalScale.toArray()),this.displacementMap&&this.displacementMap.isTexture&&(r.displacementMap=this.displacementMap.toJSON(e).uuid,r.displacementScale=this.displacementScale,r.displacementBias=this.displacementBias),this.roughnessMap&&this.roughnessMap.isTexture&&(r.roughnessMap=this.roughnessMap.toJSON(e).uuid),this.metalnessMap&&this.metalnessMap.isTexture&&(r.metalnessMap=this.metalnessMap.toJSON(e).uuid),this.emissiveMap&&this.emissiveMap.isTexture&&(r.emissiveMap=this.emissiveMap.toJSON(e).uuid),this.specularMap&&this.specularMap.isTexture&&(r.specularMap=this.specularMap.toJSON(e).uuid),this.specularIntensityMap&&this.specularIntensityMap.isTexture&&(r.specularIntensityMap=this.specularIntensityMap.toJSON(e).uuid),this.specularColorMap&&this.specularColorMap.isTexture&&(r.specularColorMap=this.specularColorMap.toJSON(e).uuid),this.envMap&&this.envMap.isTexture&&(r.envMap=this.envMap.toJSON(e).uuid,this.combine!==void 0&&(r.combine=this.combine)),this.envMapRotation!==void 0&&(r.envMapRotation=this.envMapRotation.toArray()),this.envMapIntensity!==void 0&&(r.envMapIntensity=this.envMapIntensity),this.reflectivity!==void 0&&(r.reflectivity=this.reflectivity),this.refractionRatio!==void 0&&(r.refractionRatio=this.refractionRatio),this.gradientMap&&this.gradientMap.isTexture&&(r.gradientMap=this.gradientMap.toJSON(e).uuid),this.transmission!==void 0&&(r.transmission=this.transmission),this.transmissionMap&&this.transmissionMap.isTexture&&(r.transmissionMap=this.transmissionMap.toJSON(e).uuid),this.thickness!==void 0&&(r.thickness=this.thickness),this.thicknessMap&&this.thicknessMap.isTexture&&(r.thicknessMap=this.thicknessMap.toJSON(e).uuid),this.attenuationDistance!==void 0&&this.attenuationDistance!==1/0&&(r.attenuationDistance=this.attenuationDistance),this.attenuationColor!==void 0&&(r.attenuationColor=this.attenuationColor.getHex()),this.size!==void 0&&(r.size=this.size),this.shadowSide!==null&&(r.shadowSide=this.shadowSide),this.sizeAttenuation!==void 0&&(r.sizeAttenuation=this.sizeAttenuation),this.blending!==Ox&&(r.blending=this.blending),this.side!==_p&&(r.side=this.side),this.vertexColors===!0&&(r.vertexColors=!0),this.opacity<1&&(r.opacity=this.opacity),this.transparent===!0&&(r.transparent=!0),this.blendSrc!==EF&&(r.blendSrc=this.blendSrc),this.blendDst!==DF&&(r.blendDst=this.blendDst),this.blendEquation!==Df&&(r.blendEquation=this.blendEquation),this.blendSrcAlpha!==null&&(r.blendSrcAlpha=this.blendSrcAlpha),this.blendDstAlpha!==null&&(r.blendDstAlpha=this.blendDstAlpha),this.blendEquationAlpha!==null&&(r.blendEquationAlpha=this.blendEquationAlpha),this.blendColor&&this.blendColor.isColor&&(r.blendColor=this.blendColor.getHex()),this.blendAlpha!==0&&(r.blendAlpha=this.blendAlpha),this.depthFunc!==Jx&&(r.depthFunc=this.depthFunc),this.depthTest===!1&&(r.depthTest=this.depthTest),this.depthWrite===!1&&(r.depthWrite=this.depthWrite),this.colorWrite===!1&&(r.colorWrite=this.colorWrite),this.stencilWriteMask!==255&&(r.stencilWriteMask=this.stencilWriteMask),this.stencilFunc!==d6&&(r.stencilFunc=this.stencilFunc),this.stencilRef!==0&&(r.stencilRef=this.stencilRef),this.stencilFuncMask!==255&&(r.stencilFuncMask=this.stencilFuncMask),this.stencilFail!==Eb&&(r.stencilFail=this.stencilFail),this.stencilZFail!==Eb&&(r.stencilZFail=this.stencilZFail),this.stencilZPass!==Eb&&(r.stencilZPass=this.stencilZPass),this.stencilWrite===!0&&(r.stencilWrite=this.stencilWrite),this.rotation!==void 0&&this.rotation!==0&&(r.rotation=this.rotation),this.polygonOffset===!0&&(r.polygonOffset=!0),this.polygonOffsetFactor!==0&&(r.polygonOffsetFactor=this.polygonOffsetFactor),this.polygonOffsetUnits!==0&&(r.polygonOffsetUnits=this.polygonOffsetUnits),this.linewidth!==void 0&&this.linewidth!==1&&(r.linewidth=this.linewidth),this.dashSize!==void 0&&(r.dashSize=this.dashSize),this.gapSize!==void 0&&(r.gapSize=this.gapSize),this.scale!==void 0&&(r.scale=this.scale),this.dithering===!0&&(r.dithering=!0),this.alphaTest>0&&(r.alphaTest=this.alphaTest),this.alphaHash===!0&&(r.alphaHash=!0),this.alphaToCoverage===!0&&(r.alphaToCoverage=!0),this.premultipliedAlpha===!0&&(r.premultipliedAlpha=!0),this.forceSinglePass===!0&&(r.forceSinglePass=!0),this.wireframe===!0&&(r.wireframe=!0),this.wireframeLinewidth>1&&(r.wireframeLinewidth=this.wireframeLinewidth),this.wireframeLinecap!=="round"&&(r.wireframeLinecap=this.wireframeLinecap),this.wireframeLinejoin!=="round"&&(r.wireframeLinejoin=this.wireframeLinejoin),this.flatShading===!0&&(r.flatShading=!0),this.visible===!1&&(r.visible=!1),this.toneMapped===!1&&(r.toneMapped=!1),this.fog===!1&&(r.fog=!1),Object.keys(this.userData).length>0&&(r.userData=this.userData);function i(s){const o=[];for(const l in s){const c=s[l];delete c.metadata,o.push(c)}return o}if(n){const s=i(e.textures),o=i(e.images);s.length>0&&(r.textures=s),o.length>0&&(r.images=o)}return r}clone(){return new this.constructor().copy(this)}copy(e){this.name=e.name,this.blending=e.blending,this.side=e.side,this.vertexColors=e.vertexColors,this.opacity=e.opacity,this.transparent=e.transparent,this.blendSrc=e.blendSrc,this.blendDst=e.blendDst,this.blendEquation=e.blendEquation,this.blendSrcAlpha=e.blendSrcAlpha,this.blendDstAlpha=e.blendDstAlpha,this.blendEquationAlpha=e.blendEquationAlpha,this.blendColor.copy(e.blendColor),this.blendAlpha=e.blendAlpha,this.depthFunc=e.depthFunc,this.depthTest=e.depthTest,this.depthWrite=e.depthWrite,this.stencilWriteMask=e.stencilWriteMask,this.stencilFunc=e.stencilFunc,this.stencilRef=e.stencilRef,this.stencilFuncMask=e.stencilFuncMask,this.stencilFail=e.stencilFail,this.stencilZFail=e.stencilZFail,this.stencilZPass=e.stencilZPass,this.stencilWrite=e.stencilWrite;const n=e.clippingPlanes;let r=null;if(n!==null){const i=n.length;r=new Array(i);for(let s=0;s!==i;++s)r[s]=n[s].clone()}return this.clippingPlanes=r,this.clipIntersection=e.clipIntersection,this.clipShadows=e.clipShadows,this.shadowSide=e.shadowSide,this.colorWrite=e.colorWrite,this.precision=e.precision,this.polygonOffset=e.polygonOffset,this.polygonOffsetFactor=e.polygonOffsetFactor,this.polygonOffsetUnits=e.polygonOffsetUnits,this.dithering=e.dithering,this.alphaTest=e.alphaTest,this.alphaHash=e.alphaHash,this.alphaToCoverage=e.alphaToCoverage,this.premultipliedAlpha=e.premultipliedAlpha,this.forceSinglePass=e.forceSinglePass,this.visible=e.visible,this.toneMapped=e.toneMapped,this.userData=JSON.parse(JSON.stringify(e.userData)),this}dispose(){this.dispatchEvent({type:"dispose"})}set needsUpdate(e){e===!0&&this.version++}},yO=class extends jy{constructor(e){super(),this.isMeshBasicMaterial=!0,this.type="MeshBasicMaterial",this.color=new ir(16777215),this.map=null,this.lightMap=null,this.lightMapIntensity=1,this.aoMap=null,this.aoMapIntensity=1,this.specularMap=null,this.alphaMap=null,this.envMap=null,this.envMapRotation=new kp,this.combine=cO,this.reflectivity=1,this.refractionRatio=.98,this.wireframe=!1,this.wireframeLinewidth=1,this.wireframeLinecap="round",this.wireframeLinejoin="round",this.fog=!0,this.setValues(e)}copy(e){return super.copy(e),this.color.copy(e.color),this.map=e.map,this.lightMap=e.lightMap,this.lightMapIntensity=e.lightMapIntensity,this.aoMap=e.aoMap,this.aoMapIntensity=e.aoMapIntensity,this.specularMap=e.specularMap,this.alphaMap=e.alphaMap,this.envMap=e.envMap,this.envMapRotation.copy(e.envMapRotation),this.combine=e.combine,this.reflectivity=e.reflectivity,this.refractionRatio=e.refractionRatio,this.wireframe=e.wireframe,this.wireframeLinewidth=e.wireframeLinewidth,this.wireframeLinecap=e.wireframeLinecap,this.wireframeLinejoin=e.wireframeLinejoin,this.fog=e.fog,this}};const fi=new Nt,h1=new tr;let P0e=0,co=class{constructor(e,n,r=!1){if(Array.isArray(e))throw new TypeError("THREE.BufferAttribute: array should be a Typed Array.");this.isBufferAttribute=!0,Object.defineProperty(this,"id",{value:P0e++}),this.name="",this.array=e,this.itemSize=n,this.count=e!==void 0?e.length/n:0,this.normalized=r,this.usage=u6,this.updateRanges=[],this.gpuType=tm,this.version=0}onUploadCallback(){}set needsUpdate(e){e===!0&&this.version++}setUsage(e){return this.usage=e,this}addUpdateRange(e,n){this.updateRanges.push({start:e,count:n})}clearUpdateRanges(){this.updateRanges.length=0}copy(e){return this.name=e.name,this.array=new e.array.constructor(e.array),this.itemSize=e.itemSize,this.count=e.count,this.normalized=e.normalized,this.usage=e.usage,this.gpuType=e.gpuType,this}copyAt(e,n,r){e*=this.itemSize,r*=n.itemSize;for(let i=0,s=this.itemSize;i<s;i++)this.array[e+i]=n.array[r+i];return this}copyArray(e){return this.array.set(e),this}applyMatrix3(e){if(this.itemSize===2)for(let n=0,r=this.count;n<r;n++)h1.fromBufferAttribute(this,n),h1.applyMatrix3(e),this.setXY(n,h1.x,h1.y);else if(this.itemSize===3)for(let n=0,r=this.count;n<r;n++)fi.fromBufferAttribute(this,n),fi.applyMatrix3(e),this.setXYZ(n,fi.x,fi.y,fi.z);return this}applyMatrix4(e){for(let n=0,r=this.count;n<r;n++)fi.fromBufferAttribute(this,n),fi.applyMatrix4(e),this.setXYZ(n,fi.x,fi.y,fi.z);return this}applyNormalMatrix(e){for(let n=0,r=this.count;n<r;n++)fi.fromBufferAttribute(this,n),fi.applyNormalMatrix(e),this.setXYZ(n,fi.x,fi.y,fi.z);return this}transformDirection(e){for(let n=0,r=this.count;n<r;n++)fi.fromBufferAttribute(this,n),fi.transformDirection(e),this.setXYZ(n,fi.x,fi.y,fi.z);return this}set(e,n=0){return this.array.set(e,n),this}getComponent(e,n){let r=this.array[e*this.itemSize+n];return this.normalized&&(r=Lv(r,this.array)),r}setComponent(e,n,r){return this.normalized&&(r=Ao(r,this.array)),this.array[e*this.itemSize+n]=r,this}getX(e){let n=this.array[e*this.itemSize];return this.normalized&&(n=Lv(n,this.array)),n}setX(e,n){return this.normalized&&(n=Ao(n,this.array)),this.array[e*this.itemSize]=n,this}getY(e){let n=this.array[e*this.itemSize+1];return this.normalized&&(n=Lv(n,this.array)),n}setY(e,n){return this.normalized&&(n=Ao(n,this.array)),this.array[e*this.itemSize+1]=n,this}getZ(e){let n=this.array[e*this.itemSize+2];return this.normalized&&(n=Lv(n,this.array)),n}setZ(e,n){return this.normalized&&(n=Ao(n,this.array)),this.array[e*this.itemSize+2]=n,this}getW(e){let n=this.array[e*this.itemSize+3];return this.normalized&&(n=Lv(n,this.array)),n}setW(e,n){return this.normalized&&(n=Ao(n,this.array)),this.array[e*this.itemSize+3]=n,this}setXY(e,n,r){return e*=this.itemSize,this.normalized&&(n=Ao(n,this.array),r=Ao(r,this.array)),this.array[e+0]=n,this.array[e+1]=r,this}setXYZ(e,n,r,i){return e*=this.itemSize,this.normalized&&(n=Ao(n,this.array),r=Ao(r,this.array),i=Ao(i,this.array)),this.array[e+0]=n,this.array[e+1]=r,this.array[e+2]=i,this}setXYZW(e,n,r,i,s){return e*=this.itemSize,this.normalized&&(n=Ao(n,this.array),r=Ao(r,this.array),i=Ao(i,this.array),s=Ao(s,this.array)),this.array[e+0]=n,this.array[e+1]=r,this.array[e+2]=i,this.array[e+3]=s,this}onUpload(e){return this.onUploadCallback=e,this}clone(){return new this.constructor(this.array,this.itemSize).copy(this)}toJSON(){const e={itemSize:this.itemSize,type:this.array.constructor.name,array:Array.from(this.array),normalized:this.normalized};return this.name!==""&&(e.name=this.name),this.usage!==u6&&(e.usage=this.usage),e}},QJ=class extends co{constructor(e,n,r){super(new Uint16Array(e),n,r)}},JJ=class extends co{constructor(e,n,r){super(new Uint32Array(e),n,r)}},dl=class extends co{constructor(e,n,r){super(new Float32Array(e),n,r)}},T0e=0;const Ll=new wi,oE=new gl,Hb=new Nt,tl=new mp,Bv=new mp,qi=new Nt;let dc=class ZJ extends Wg{constructor(){super(),this.isBufferGeometry=!0,Object.defineProperty(this,"id",{value:T0e++}),this.uuid=pS(),this.name="",this.type="BufferGeometry",this.index=null,this.indirect=null,this.attributes={},this.morphAttributes={},this.morphTargetsRelative=!1,this.groups=[],this.boundingBox=null,this.boundingSphere=null,this.drawRange={start:0,count:1/0},this.userData={}}getIndex(){return this.index}setIndex(e){return Array.isArray(e)?this.index=new(HJ(e)?JJ:QJ)(e,1):this.index=e,this}setIndirect(e){return this.indirect=e,this}getIndirect(){return this.indirect}getAttribute(e){return this.attributes[e]}setAttribute(e,n){return this.attributes[e]=n,this}deleteAttribute(e){return delete this.attributes[e],this}hasAttribute(e){return this.attributes[e]!==void 0}addGroup(e,n,r=0){this.groups.push({start:e,count:n,materialIndex:r})}clearGroups(){this.groups=[]}setDrawRange(e,n){this.drawRange.start=e,this.drawRange.count=n}applyMatrix4(e){const n=this.attributes.position;n!==void 0&&(n.applyMatrix4(e),n.needsUpdate=!0);const r=this.attributes.normal;if(r!==void 0){const s=new ar().getNormalMatrix(e);r.applyNormalMatrix(s),r.needsUpdate=!0}const i=this.attributes.tangent;return i!==void 0&&(i.transformDirection(e),i.needsUpdate=!0),this.boundingBox!==null&&this.computeBoundingBox(),this.boundingSphere!==null&&this.computeBoundingSphere(),this}applyQuaternion(e){return Ll.makeRotationFromQuaternion(e),this.applyMatrix4(Ll),this}rotateX(e){return Ll.makeRotationX(e),this.applyMatrix4(Ll),this}rotateY(e){return Ll.makeRotationY(e),this.applyMatrix4(Ll),this}rotateZ(e){return Ll.makeRotationZ(e),this.applyMatrix4(Ll),this}translate(e,n,r){return Ll.makeTranslation(e,n,r),this.applyMatrix4(Ll),this}scale(e,n,r){return Ll.makeScale(e,n,r),this.applyMatrix4(Ll),this}lookAt(e){return oE.lookAt(e),oE.updateMatrix(),this.applyMatrix4(oE.matrix),this}center(){return this.computeBoundingBox(),this.boundingBox.getCenter(Hb).negate(),this.translate(Hb.x,Hb.y,Hb.z),this}setFromPoints(e){const n=this.getAttribute("position");if(n===void 0){const r=[];for(let i=0,s=e.length;i<s;i++){const o=e[i];r.push(o.x,o.y,o.z||0)}this.setAttribute("position",new dl(r,3))}else{const r=Math.min(e.length,n.count);for(let i=0;i<r;i++){const s=e[i];n.setXYZ(i,s.x,s.y,s.z||0)}e.length>n.count&&Hn("BufferGeometry: Buffer size too small for points data. Use .dispose() and create a new geometry."),n.needsUpdate=!0}return this}computeBoundingBox(){this.boundingBox===null&&(this.boundingBox=new mp);const e=this.attributes.position,n=this.morphAttributes.position;if(e&&e.isGLBufferAttribute){si("BufferGeometry.computeBoundingBox(): GLBufferAttribute requires a manual bounding box.",this),this.boundingBox.set(new Nt(-1/0,-1/0,-1/0),new Nt(1/0,1/0,1/0));return}if(e!==void 0){if(this.boundingBox.setFromBufferAttribute(e),n)for(let r=0,i=n.length;r<i;r++){const s=n[r];tl.setFromBufferAttribute(s),this.morphTargetsRelative?(qi.addVectors(this.boundingBox.min,tl.min),this.boundingBox.expandByPoint(qi),qi.addVectors(this.boundingBox.max,tl.max),this.boundingBox.expandByPoint(qi)):(this.boundingBox.expandByPoint(tl.min),this.boundingBox.expandByPoint(tl.max))}}else this.boundingBox.makeEmpty();(isNaN(this.boundingBox.min.x)||isNaN(this.boundingBox.min.y)||isNaN(this.boundingBox.min.z))&&si('BufferGeometry.computeBoundingBox(): Computed min/max have NaN values. The "position" attribute is likely to have NaN values.',this)}computeBoundingSphere(){this.boundingSphere===null&&(this.boundingSphere=new iT);const e=this.attributes.position,n=this.morphAttributes.position;if(e&&e.isGLBufferAttribute){si("BufferGeometry.computeBoundingSphere(): GLBufferAttribute requires a manual bounding sphere.",this),this.boundingSphere.set(new Nt,1/0);return}if(e){const r=this.boundingSphere.center;if(tl.setFromBufferAttribute(e),n)for(let s=0,o=n.length;s<o;s++){const l=n[s];Bv.setFromBufferAttribute(l),this.morphTargetsRelative?(qi.addVectors(tl.min,Bv.min),tl.expandByPoint(qi),qi.addVectors(tl.max,Bv.max),tl.expandByPoint(qi)):(tl.expandByPoint(Bv.min),tl.expandByPoint(Bv.max))}tl.getCenter(r);let i=0;for(let s=0,o=e.count;s<o;s++)qi.fromBufferAttribute(e,s),i=Math.max(i,r.distanceToSquared(qi));if(n)for(let s=0,o=n.length;s<o;s++){const l=n[s],c=this.morphTargetsRelative;for(let d=0,u=l.count;d<u;d++)qi.fromBufferAttribute(l,d),c&&(Hb.fromBufferAttribute(e,d),qi.add(Hb)),i=Math.max(i,r.distanceToSquared(qi))}this.boundingSphere.radius=Math.sqrt(i),isNaN(this.boundingSphere.radius)&&si('BufferGeometry.computeBoundingSphere(): Computed radius is NaN. The "position" attribute is likely to have NaN values.',this)}}computeTangents(){const e=this.index,n=this.attributes;if(e===null||n.position===void 0||n.normal===void 0||n.uv===void 0){si("BufferGeometry: .computeTangents() failed. Missing required attributes (index, position, normal or uv)");return}const r=n.position,i=n.normal,s=n.uv;this.hasAttribute("tangent")===!1&&this.setAttribute("tangent",new co(new Float32Array(4*r.count),4));const o=this.getAttribute("tangent"),l=[],c=[];for(let F=0;F<r.count;F++)l[F]=new Nt,c[F]=new Nt;const d=new Nt,u=new Nt,m=new Nt,p=new tr,f=new tr,x=new tr,v=new Nt,b=new Nt;function g(F,k,E){d.fromBufferAttribute(r,F),u.fromBufferAttribute(r,k),m.fromBufferAttribute(r,E),p.fromBufferAttribute(s,F),f.fromBufferAttribute(s,k),x.fromBufferAttribute(s,E),u.sub(d),m.sub(d),f.sub(p),x.sub(p);const $=1/(f.x*x.y-x.x*f.y);isFinite($)&&(v.copy(u).multiplyScalar(x.y).addScaledVector(m,-f.y).multiplyScalar($),b.copy(m).multiplyScalar(f.x).addScaledVector(u,-x.x).multiplyScalar($),l[F].add(v),l[k].add(v),l[E].add(v),c[F].add(b),c[k].add(b),c[E].add(b))}let S=this.groups;S.length===0&&(S=[{start:0,count:e.count}]);for(let F=0,k=S.length;F<k;++F){const E=S[F],$=E.start,z=E.count;for(let X=$,R=$+z;X<R;X+=3)g(e.getX(X+0),e.getX(X+1),e.getX(X+2))}const N=new Nt,P=new Nt,C=new Nt,A=new Nt;function T(F){C.fromBufferAttribute(i,F),A.copy(C);const k=l[F];N.copy(k),N.sub(C.multiplyScalar(C.dot(k))).normalize(),P.crossVectors(A,k);const $=P.dot(c[F])<0?-1:1;o.setXYZW(F,N.x,N.y,N.z,$)}for(let F=0,k=S.length;F<k;++F){const E=S[F],$=E.start,z=E.count;for(let X=$,R=$+z;X<R;X+=3)T(e.getX(X+0)),T(e.getX(X+1)),T(e.getX(X+2))}}computeVertexNormals(){const e=this.index,n=this.getAttribute("position");if(n!==void 0){let r=this.getAttribute("normal");if(r===void 0)r=new co(new Float32Array(n.count*3),3),this.setAttribute("normal",r);else for(let p=0,f=r.count;p<f;p++)r.setXYZ(p,0,0,0);const i=new Nt,s=new Nt,o=new Nt,l=new Nt,c=new Nt,d=new Nt,u=new Nt,m=new Nt;if(e)for(let p=0,f=e.count;p<f;p+=3){const x=e.getX(p+0),v=e.getX(p+1),b=e.getX(p+2);i.fromBufferAttribute(n,x),s.fromBufferAttribute(n,v),o.fromBufferAttribute(n,b),u.subVectors(o,s),m.subVectors(i,s),u.cross(m),l.fromBufferAttribute(r,x),c.fromBufferAttribute(r,v),d.fromBufferAttribute(r,b),l.add(u),c.add(u),d.add(u),r.setXYZ(x,l.x,l.y,l.z),r.setXYZ(v,c.x,c.y,c.z),r.setXYZ(b,d.x,d.y,d.z)}else for(let p=0,f=n.count;p<f;p+=3)i.fromBufferAttribute(n,p+0),s.fromBufferAttribute(n,p+1),o.fromBufferAttribute(n,p+2),u.subVectors(o,s),m.subVectors(i,s),u.cross(m),r.setXYZ(p+0,u.x,u.y,u.z),r.setXYZ(p+1,u.x,u.y,u.z),r.setXYZ(p+2,u.x,u.y,u.z);this.normalizeNormals(),r.needsUpdate=!0}}normalizeNormals(){const e=this.attributes.normal;for(let n=0,r=e.count;n<r;n++)qi.fromBufferAttribute(e,n),qi.normalize(),e.setXYZ(n,qi.x,qi.y,qi.z)}toNonIndexed(){function e(l,c){const d=l.array,u=l.itemSize,m=l.normalized,p=new d.constructor(c.length*u);let f=0,x=0;for(let v=0,b=c.length;v<b;v++){l.isInterleavedBufferAttribute?f=c[v]*l.data.stride+l.offset:f=c[v]*u;for(let g=0;g<u;g++)p[x++]=d[f++]}return new co(p,u,m)}if(this.index===null)return Hn("BufferGeometry.toNonIndexed(): BufferGeometry is already non-indexed."),this;const n=new ZJ,r=this.index.array,i=this.attributes;for(const l in i){const c=i[l],d=e(c,r);n.setAttribute(l,d)}const s=this.morphAttributes;for(const l in s){const c=[],d=s[l];for(let u=0,m=d.length;u<m;u++){const p=d[u],f=e(p,r);c.push(f)}n.morphAttributes[l]=c}n.morphTargetsRelative=this.morphTargetsRelative;const o=this.groups;for(let l=0,c=o.length;l<c;l++){const d=o[l];n.addGroup(d.start,d.count,d.materialIndex)}return n}toJSON(){const e={metadata:{version:4.7,type:"BufferGeometry",generator:"BufferGeometry.toJSON"}};if(e.uuid=this.uuid,e.type=this.type,this.name!==""&&(e.name=this.name),Object.keys(this.userData).length>0&&(e.userData=this.userData),this.parameters!==void 0){const c=this.parameters;for(const d in c)c[d]!==void 0&&(e[d]=c[d]);return e}e.data={attributes:{}};const n=this.index;n!==null&&(e.data.index={type:n.array.constructor.name,array:Array.prototype.slice.call(n.array)});const r=this.attributes;for(const c in r){const d=r[c];e.data.attributes[c]=d.toJSON(e.data)}const i={};let s=!1;for(const c in this.morphAttributes){const d=this.morphAttributes[c],u=[];for(let m=0,p=d.length;m<p;m++){const f=d[m];u.push(f.toJSON(e.data))}u.length>0&&(i[c]=u,s=!0)}s&&(e.data.morphAttributes=i,e.data.morphTargetsRelative=this.morphTargetsRelative);const o=this.groups;o.length>0&&(e.data.groups=JSON.parse(JSON.stringify(o)));const l=this.boundingSphere;return l!==null&&(e.data.boundingSphere=l.toJSON()),e}clone(){return new this.constructor().copy(this)}copy(e){this.index=null,this.attributes={},this.morphAttributes={},this.groups=[],this.boundingBox=null,this.boundingSphere=null;const n={};this.name=e.name;const r=e.index;r!==null&&this.setIndex(r.clone());const i=e.attributes;for(const d in i){const u=i[d];this.setAttribute(d,u.clone(n))}const s=e.morphAttributes;for(const d in s){const u=[],m=s[d];for(let p=0,f=m.length;p<f;p++)u.push(m[p].clone(n));this.morphAttributes[d]=u}this.morphTargetsRelative=e.morphTargetsRelative;const o=e.groups;for(let d=0,u=o.length;d<u;d++){const m=o[d];this.addGroup(m.start,m.count,m.materialIndex)}const l=e.boundingBox;l!==null&&(this.boundingBox=l.clone());const c=e.boundingSphere;return c!==null&&(this.boundingSphere=c.clone()),this.drawRange.start=e.drawRange.start,this.drawRange.count=e.drawRange.count,this.userData=e.userData,this}dispose(){this.dispatchEvent({type:"dispose"})}};const C6=new wi,ff=new xO,p1=new iT,P6=new Nt,f1=new Nt,g1=new Nt,b1=new Nt,lE=new Nt,x1=new Nt,T6=new Nt,y1=new Nt;let uc=class extends gl{constructor(e=new dc,n=new yO){super(),this.isMesh=!0,this.type="Mesh",this.geometry=e,this.material=n,this.morphTargetDictionary=void 0,this.morphTargetInfluences=void 0,this.count=1,this.updateMorphTargets()}copy(e,n){return super.copy(e,n),e.morphTargetInfluences!==void 0&&(this.morphTargetInfluences=e.morphTargetInfluences.slice()),e.morphTargetDictionary!==void 0&&(this.morphTargetDictionary=Object.assign({},e.morphTargetDictionary)),this.material=Array.isArray(e.material)?e.material.slice():e.material,this.geometry=e.geometry,this}updateMorphTargets(){const n=this.geometry.morphAttributes,r=Object.keys(n);if(r.length>0){const i=n[r[0]];if(i!==void 0){this.morphTargetInfluences=[],this.morphTargetDictionary={};for(let s=0,o=i.length;s<o;s++){const l=i[s].name||String(s);this.morphTargetInfluences.push(0),this.morphTargetDictionary[l]=s}}}}getVertexPosition(e,n){const r=this.geometry,i=r.attributes.position,s=r.morphAttributes.position,o=r.morphTargetsRelative;n.fromBufferAttribute(i,e);const l=this.morphTargetInfluences;if(s&&l){x1.set(0,0,0);for(let c=0,d=s.length;c<d;c++){const u=l[c],m=s[c];u!==0&&(lE.fromBufferAttribute(m,e),o?x1.addScaledVector(lE,u):x1.addScaledVector(lE.sub(n),u))}n.add(x1)}return n}raycast(e,n){const r=this.geometry,i=this.material,s=this.matrixWorld;i!==void 0&&(r.boundingSphere===null&&r.computeBoundingSphere(),p1.copy(r.boundingSphere),p1.applyMatrix4(s),ff.copy(e.ray).recast(e.near),!(p1.containsPoint(ff.origin)===!1&&(ff.intersectSphere(p1,P6)===null||ff.origin.distanceToSquared(P6)>(e.far-e.near)**2))&&(C6.copy(s).invert(),ff.copy(e.ray).applyMatrix4(C6),!(r.boundingBox!==null&&ff.intersectsBox(r.boundingBox)===!1)&&this._computeIntersections(e,n,ff)))}_computeIntersections(e,n,r){let i;const s=this.geometry,o=this.material,l=s.index,c=s.attributes.position,d=s.attributes.uv,u=s.attributes.uv1,m=s.attributes.normal,p=s.groups,f=s.drawRange;if(l!==null)if(Array.isArray(o))for(let x=0,v=p.length;x<v;x++){const b=p[x],g=o[b.materialIndex],S=Math.max(b.start,f.start),N=Math.min(l.count,Math.min(b.start+b.count,f.start+f.count));for(let P=S,C=N;P<C;P+=3){const A=l.getX(P),T=l.getX(P+1),F=l.getX(P+2);i=v1(this,g,e,r,d,u,m,A,T,F),i&&(i.faceIndex=Math.floor(P/3),i.face.materialIndex=b.materialIndex,n.push(i))}}else{const x=Math.max(0,f.start),v=Math.min(l.count,f.start+f.count);for(let b=x,g=v;b<g;b+=3){const S=l.getX(b),N=l.getX(b+1),P=l.getX(b+2);i=v1(this,o,e,r,d,u,m,S,N,P),i&&(i.faceIndex=Math.floor(b/3),n.push(i))}}else if(c!==void 0)if(Array.isArray(o))for(let x=0,v=p.length;x<v;x++){const b=p[x],g=o[b.materialIndex],S=Math.max(b.start,f.start),N=Math.min(c.count,Math.min(b.start+b.count,f.start+f.count));for(let P=S,C=N;P<C;P+=3){const A=P,T=P+1,F=P+2;i=v1(this,g,e,r,d,u,m,A,T,F),i&&(i.faceIndex=Math.floor(P/3),i.face.materialIndex=b.materialIndex,n.push(i))}}else{const x=Math.max(0,f.start),v=Math.min(c.count,f.start+f.count);for(let b=x,g=v;b<g;b+=3){const S=b,N=b+1,P=b+2;i=v1(this,o,e,r,d,u,m,S,N,P),i&&(i.faceIndex=Math.floor(b/3),n.push(i))}}}};function A0e(t,e,n,r,i,s,o,l){let c;if(e.side===Lo?c=r.intersectTriangle(o,s,i,!0,l):c=r.intersectTriangle(i,s,o,e.side===_p,l),c===null)return null;y1.copy(l),y1.applyMatrix4(t.matrixWorld);const d=n.ray.origin.distanceTo(y1);return d<n.near||d>n.far?null:{distance:d,point:y1.clone(),object:t}}function v1(t,e,n,r,i,s,o,l,c,d){t.getVertexPosition(l,f1),t.getVertexPosition(c,g1),t.getVertexPosition(d,b1);const u=A0e(t,e,n,r,f1,g1,b1,T6);if(u){const m=new Nt;Uv.getBarycoord(T6,f1,g1,b1,m),i&&(u.uv=Uv.getInterpolatedAttribute(i,l,c,d,m,new tr)),s&&(u.uv1=Uv.getInterpolatedAttribute(s,l,c,d,m,new tr)),o&&(u.normal=Uv.getInterpolatedAttribute(o,l,c,d,m,new Nt),u.normal.dot(r.direction)>0&&u.normal.multiplyScalar(-1));const p={a:l,b:c,c:d,normal:new Nt,materialIndex:0};Uv.getNormal(f1,g1,b1,p.normal),u.face=p,u.barycoord=m}return u}let vO=class eZ extends dc{constructor(e=1,n=1,r=1,i=1,s=1,o=1){super(),this.type="BoxGeometry",this.parameters={width:e,height:n,depth:r,widthSegments:i,heightSegments:s,depthSegments:o};const l=this;i=Math.floor(i),s=Math.floor(s),o=Math.floor(o);const c=[],d=[],u=[],m=[];let p=0,f=0;x("z","y","x",-1,-1,r,n,e,o,s,0),x("z","y","x",1,-1,r,n,-e,o,s,1),x("x","z","y",1,1,e,r,n,i,o,2),x("x","z","y",1,-1,e,r,-n,i,o,3),x("x","y","z",1,-1,e,n,r,i,s,4),x("x","y","z",-1,-1,e,n,-r,i,s,5),this.setIndex(c),this.setAttribute("position",new dl(d,3)),this.setAttribute("normal",new dl(u,3)),this.setAttribute("uv",new dl(m,2));function x(v,b,g,S,N,P,C,A,T,F,k){const E=P/T,$=C/F,z=P/2,X=C/2,R=A/2,ne=T+1,re=F+1;let J=0,ue=0;const ie=new Nt;for(let se=0;se<re;se++){const K=se*$-X;for(let ae=0;ae<ne;ae++){const pe=ae*E-z;ie[v]=pe*S,ie[b]=K*N,ie[g]=R,d.push(ie.x,ie.y,ie.z),ie[v]=0,ie[b]=0,ie[g]=A>0?1:-1,u.push(ie.x,ie.y,ie.z),m.push(ae/T),m.push(1-se/F),J+=1}}for(let se=0;se<F;se++)for(let K=0;K<T;K++){const ae=p+K+ne*se,pe=p+K+ne*(se+1),be=p+(K+1)+ne*(se+1),fe=p+(K+1)+ne*se;c.push(ae,pe,fe),c.push(pe,be,fe),ue+=6}l.addGroup(f,ue,k),f+=ue,p+=J}}copy(e){return super.copy(e),this.parameters=Object.assign({},e.parameters),this}static fromJSON(e){return new eZ(e.width,e.height,e.depth,e.widthSegments,e.heightSegments,e.depthSegments)}};function ny(t){const e={};for(const n in t){e[n]={};for(const r in t[n]){const i=t[n][r];i&&(i.isColor||i.isMatrix3||i.isMatrix4||i.isVector2||i.isVector3||i.isVector4||i.isTexture||i.isQuaternion)?i.isRenderTargetTexture?(Hn("UniformsUtils: Textures of render targets cannot be cloned via cloneUniforms() or mergeUniforms()."),e[n][r]=null):e[n][r]=i.clone():Array.isArray(i)?e[n][r]=i.slice():e[n][r]=i}}return e}function no(t){const e={};for(let n=0;n<t.length;n++){const r=ny(t[n]);for(const i in r)e[i]=r[i]}return e}function j0e(t){const e=[];for(let n=0;n<t.length;n++)e.push(t[n].clone());return e}function tZ(t){const e=t.getRenderTarget();return e===null?t.outputColorSpace:e.isXRRenderTarget===!0?e.texture.colorSpace:Fr.workingColorSpace}const M0e={clone:ny,merge:no};var E0e=`void main() {
 	gl_Position = projectionMatrix * modelViewMatrix * vec4( position, 1.0 );
 }`,D0e=`void main() {
 	gl_FragColor = vec4( 1.0, 0.0, 0.0, 1.0 );
@@ -8533,7 +8533,7 @@ ${o("inventory.assignProfileMismatchMessage",{spoolProfile:N.spoolProfile||o("co
             absolute left-0 z-50
             ${u==="top"?"bottom-full mb-2":"top-full mt-2"}
             animate-in fade-in-0 zoom-in-95 duration-150
-          `,style:{maxWidth:"calc(100vw - 24px)"},onMouseEnter:T,onMouseLeave:F,children:a.jsxs("div",{className:"w-52 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl overflow-hidden backdrop-blur-sm p-2.5 space-y-2",children:[a.jsx("div",{className:"text-[10px] uppercase tracking-wider text-bambu-gray font-medium",children:n}),a.jsxs("div",{className:"flex items-center justify-between gap-2",children:[a.jsx("span",{className:"text-[10px] tracking-wide text-bambu-gray font-medium shrink-0",children:l("printers.amsPopup.serialNumber")}),a.jsx("span",{className:"text-[10px] text-white font-mono truncate",children:t.serial_number||"—"})]}),a.jsxs("div",{className:"flex items-center justify-between gap-2",children:[a.jsx("span",{className:"text-[10px] tracking-wide text-bambu-gray font-medium shrink-0",children:l("printers.amsPopup.firmwareVersion")}),a.jsx("span",{className:"text-[10px] text-white font-mono truncate",children:t.sw_ver||"—"})]}),a.jsx("div",{className:"h-px bg-bambu-dark-tertiary/50"}),a.jsxs("div",{className:"space-y-1",children:[a.jsx("span",{className:"text-[10px] text-bambu-gray font-medium block",children:l("printers.amsPopup.friendlyName")}),a.jsx("input",{type:"text",value:p,onChange:$=>i&&f($.target.value),onKeyDown:$=>$.key==="Enter"&&k(),onFocus:()=>N(!0),onBlur:()=>{N(!1),A.current&&clearTimeout(A.current),A.current=setTimeout(()=>d(!1),200)},placeholder:i?l("printers.amsPopup.friendlyNamePlaceholder"):r?.[t.id]||"—",disabled:!i,title:i?void 0:l("printers.amsPopup.noEditPermission"),className:"w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-2 py-1 text-xs text-white placeholder-bambu-gray/60 focus:outline-none focus:border-bambu-green disabled:opacity-50 disabled:cursor-not-allowed",maxLength:100}),i&&a.jsxs("div",{className:"space-y-1",children:[b&&a.jsx("p",{className:"text-[10px] text-red-400 break-words",children:b}),a.jsxs("div",{className:"flex gap-1 justify-end",children:[a.jsx("button",{onClick:k,disabled:x,className:"px-2 py-0.5 text-[10px] bg-bambu-green text-white rounded hover:bg-bambu-green/80 disabled:opacity-50",children:l("printers.amsPopup.save")}),r?.[t.id]&&a.jsx("button",{onClick:E,disabled:x,className:"px-2 py-0.5 text-[10px] bg-bambu-dark-tertiary text-bambu-gray rounded hover:bg-bambu-dark-tertiary/70 disabled:opacity-50",children:l("printers.amsPopup.clear")})]})]})]})]})})]})}const IL={PLA:{n3f:45,n3s:45,n3f_hours:12,n3s_hours:12},PETG:{n3f:65,n3s:65,n3f_hours:12,n3s_hours:12},TPU:{n3f:65,n3s:75,n3f_hours:12,n3s_hours:18},ABS:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},ASA:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:12},PC:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PVA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:18}};function DK({printer:t,hideIfDisconnected:e,maintenanceInfo:n,viewMode:r="expanded",cardSize:i=2,amsThresholds:s,spoolmanEnabled:o=!1,linkedSpools:l,spoolmanUrl:c,spoolmanSyncMode:d,onGetAssignment:u,onUnassignSpool:m,timeFormat:p="system",cameraViewMode:f="window",onOpenEmbeddedCamera:x,checkPrinterFirmware:v=!0,dryingPresets:b=IL,requirePlateClear:g=!1,selectionMode:S=!1,isSelected:N=!1,onToggleSelect:P}){const{t:C}=_t(),A=tn(),T=as(),{showToast:F}=rn(),{hasPermission:k}=gr(),[E,$]=w.useState(!1),[z,X]=w.useState(!1),[R,ne]=w.useState(!0),[re,J]=w.useState(!1),[ue,ie]=w.useState(!1),[se,K]=w.useState(!1),[ae,pe]=w.useState(!1),[be,fe]=w.useState(!1),[B,Y]=w.useState(!1),[D,M]=w.useState(!1),[U,Q]=w.useState(!1),[O,ce]=w.useState(null),[I,G]=w.useState(null),[q,W]=w.useState(null),[te,le]=w.useState(10),[ye,he]=w.useState(null),[me,H]=w.useState(!1),[L,ee]=w.useState(!1),[ge,ke]=w.useState(!1),[je,Te]=w.useState(!1),xe=w.useCallback(()=>Te(!1),[]),[Fe,Be]=w.useState(null),[Ce,ze]=w.useState(null),[Me,Oe]=w.useState("n3f"),[Ge,et]=w.useState("PLA"),[ve,Xe]=w.useState(50),[Pe,Ve]=w.useState(4),[we,de]=w.useState(!1),[Se,$e]=w.useState(null),[st,He]=w.useState(!1),[at,ht]=w.useState(!1),Mt=w.useRef(0),[qt,Vt]=w.useState(null),[Gt,Qt]=w.useState(null),[an,mn]=w.useState(null),[dn,jt]=w.useState(null),[Jt,zt]=w.useState(!1),[Tt,Ie]=w.useState(null),[Re,Ye]=w.useState(!1),[Ze,Le]=w.useState(!1),[dt,Ae]=w.useState(null),[We,tt]=w.useState(!1),[nt,Je]=w.useState(!1),{data:Ue}=Qe({queryKey:["printerStatus",t.id],queryFn:()=>oe.getPrinterStatus(t.id),refetchInterval:3e4}),{data:rt}=Qe({queryKey:["firmwareUpdate",t.id],queryFn:()=>Gk.checkPrinterUpdate(t.id),staleTime:300*1e3,refetchInterval:300*1e3,enabled:v&&k("firmware:read")}),Ct=w.useMemo(()=>{const it=new Set;if(Ue?.ams)for(const Dt of Ue.ams)for(const Xt of Dt.tray||[])Xt.tray_info_idx&&it.add(Xt.tray_info_idx);for(const Dt of Ue?.vt_tray??[])Dt.tray_info_idx&&it.add(Dt.tray_info_idx);if(Ue?.nozzle_rack)for(const Dt of Ue.nozzle_rack)Dt.filament_id&&it.add(Dt.filament_id);return Array.from(it)},[Ue?.ams,Ue?.vt_tray,Ue?.nozzle_rack]),bt=w.useMemo(()=>{const it=new Set;if(Ue?.ams)for(const Dt of Ue.ams)for(const Xt of Dt.tray||[])Xt.tray_type&&it.add(Xt.tray_type.toUpperCase());for(const Dt of Ue?.vt_tray??[])Dt.tray_type&&it.add(Dt.tray_type.toUpperCase());return it},[Ue?.ams,Ue?.vt_tray]),Ot=w.useMemo(()=>{const it=new Set;if(Ue?.ams){for(const Dt of Ue.ams)for(const Xt of Dt.tray||[])if(Xt.tray_type&&Xt.tray_color){const ct=Xt.tray_color.replace("#","").toLowerCase().slice(0,6);it.add(`${Xt.tray_type.toUpperCase()}:${ct}`)}}for(const Dt of Ue?.vt_tray??[])if(Dt.tray_type&&Dt.tray_color){const Xt=Dt.tray_color.replace("#","").toLowerCase().slice(0,6);it.add(`${Dt.tray_type.toUpperCase()}:${Xt}`)}return it},[Ue?.ams,Ue?.vt_tray]),{data:Lt}=Qe({queryKey:["filamentInfo",Ct],queryFn:()=>oe.getFilamentInfo(Ct),enabled:Ct.length>0,staleTime:300*1e3}),{data:Ft}=Qe({queryKey:["slotPresets",t.id],queryFn:()=>oe.getSlotPresets(t.id),staleTime:120*1e3}),Ke=Ue?.state==="RUNNING"||Ue?.state==="PAUSE"?Ue?.current_archive_id??null:null,{data:Ht}=Qe({queryKey:["archive-plates",Ke],queryFn:()=>oe.getArchivePlates(Ke),enabled:Ke!=null,staleTime:300*1e3}),Yt=!Ht?.is_multi_plate||Ue?.current_plate_id==null?null:Ht.plates.find(Dt=>Dt.index===Ue.current_plate_id)?.name||C("printers.plateNumber","Plate {{number}}",{number:Ue.current_plate_id}),{data:on,refetch:wn}=Qe({queryKey:["amsLabels",t.id],queryFn:()=>oe.getAmsLabels(t.id),staleTime:300*1e3}),[gn,_n]=w.useState(null);w.useEffect(()=>{Ue?.wifi_signal!=null&&_n(Ue.wifi_signal)},[Ue?.wifi_signal]);const xn=Ue?.wifi_signal??gn,br=w.useRef(void 0);w.useEffect(()=>{Ue?.connected!==void 0&&(br.current=Ue.connected)},[Ue?.connected]);const Tr=Ue?.connected??br.current,On=w.useRef({});w.useEffect(()=>{Ue?.ams_extruder_map&&Object.keys(Ue.ams_extruder_map).length>0&&(On.current=Ue.ams_extruder_map)},[Ue?.ams_extruder_map]);const Ra=Ue?.ams_extruder_map&&Object.keys(Ue.ams_extruder_map).length>0?Ue.ams_extruder_map:On.current,$n=w.useRef([]);w.useEffect(()=>{Ue?.ams&&Ue.ams.length>0&&($n.current=Ue.ams)},[Ue?.ams]);const Br=Ue?.ams&&Ue.ams.length>0?Ue.ams:$n.current,Kr=w.useRef(void 0),ur=Ue?.tray_now;ur!==void 0&&ur!==255?Kr.current=ur:ur===255&&(Kr.current=void 0);const Hr=ur!==void 0&&ur!==255?ur:Kr.current,{data:or}=Qe({queryKey:["smartPlugByPrinter",t.id],queryFn:()=>oe.getSmartPlugByPrinter(t.id)}),{data:ki}=Qe({queryKey:["scriptPlugsByPrinter",t.id],queryFn:()=>oe.getScriptPlugsByPrinter(t.id)}),{data:Oi}=Qe({queryKey:["smartPlugStatus",or?.id],queryFn:()=>or?oe.getSmartPlugStatus(or.id):null,enabled:!!or,refetchInterval:1e4}),{data:yc}=Qe({queryKey:["queue",t.id,"pending"],queryFn:()=>oe.getQueue(t.id,"pending")}),yl=w.useMemo(()=>yc?.length?nee(yc,bt,Ot).length:0,[yc,bt,Ot]),{data:Pt}=Qe({queryKey:["queue",t.id,"printing"],queryFn:()=>oe.getQueue(t.id,"printing"),enabled:Ue?.state==="RUNNING"}),{data:Dn}=Qe({queryKey:["currentPrintUser",t.id],queryFn:()=>oe.getCurrentPrintUser(t.id),enabled:Ue?.state==="RUNNING"}),mr=Pt?.[0]?.created_by_username||Dn?.username,{data:Wt}=Qe({queryKey:["archives",t.id,"last"],queryFn:()=>oe.getArchives(t.id,1,0),enabled:Ue?.connected&&Ue?.state!=="RUNNING"}),Ms=Wt?.[0],vo=Ue?.state==="RUNNING"||Ue?.state==="PAUSE",td=g&&Ue?.awaiting_plate_clear===!0,vl=Ue?.connected&&td&&!vo,Ir=!g||!Ue?.connected?null:vo?{label:C("printers.plateStatus.inUse"),className:"bg-blue-500/20 text-blue-400"}:Ue.awaiting_plate_clear?{label:C("printers.plateStatus.notCleared"),className:"bg-yellow-500/20 text-yellow-400"}:{label:C("printers.plateStatus.cleared"),className:"bg-status-ok/20 text-status-ok"},nd=Ir?a.jsx("span",{className:`inline-flex flex-shrink-0 items-center rounded-full px-2 py-0.5 text-[10px] font-medium ${Ir.className}`,children:Ir.label}):null,$p=e&&Tr===!1,ls=ot({mutationFn:it=>oe.deletePrinter(t.id,it.deleteArchives),onSuccess:()=>{A.invalidateQueries({queryKey:["printers"]}),A.invalidateQueries({queryKey:["archives"]}),A.invalidateQueries({queryKey:["maintenanceOverview"]})},onError:it=>F(it.message||C("printers.toast.failedToDelete"),"error")}),$o=ot({mutationFn:()=>oe.connectPrinter(t.id),onSuccess:()=>{A.invalidateQueries({queryKey:["printerStatus",t.id]})}}),zi=ot({mutationFn:()=>oe.refreshPrinterStatus(t.id),onSuccess:()=>{A.invalidateQueries({queryKey:["printerStatus",t.id]}),F(C("printers.forceRefreshSuccess"),"success")},onError:it=>F(it.message||C("printers.toast.failedToSendCommand"),"error")}),wl=ot({mutationFn:it=>oe.unlinkSpool(it),onSuccess:it=>{F(C("spoolman.unlinkSuccess")||it?.message,"success"),A.invalidateQueries({queryKey:["linked-spools"]}),A.invalidateQueries({queryKey:["unlinked-spools"]})},onError:it=>{F(it.message||C("spoolman.unlinkFailed"),"error")}}),wo=ot({mutationFn:({amsId:it,temp:Dt,duration:Xt,filament:ct,rotateTray:Mn})=>oe.startDrying(t.id,it,Dt,Xt,ct,Mn),onSuccess:()=>{ze(null),A.invalidateQueries({queryKey:["printerStatus",t.id]})},onError:it=>F(it.message||C("printers.toast.failedToSendCommand"),"error")}),ha=ot({mutationFn:it=>oe.stopDrying(t.id,it),onSuccess:()=>{A.invalidateQueries({queryKey:["printerStatus",t.id]})},onError:it=>F(it.message||C("printers.toast.failedToSendCommand"),"error")}),vc=ot({mutationFn:it=>or?oe.controlSmartPlug(or.id,it):Promise.reject("No plug"),onSuccess:()=>{A.invalidateQueries({queryKey:["smartPlugStatus",or?.id]})}}),Im=ot({mutationFn:it=>or?oe.updateSmartPlug(or.id,{auto_off:it}):Promise.reject("No plug"),onSuccess:()=>{A.invalidateQueries({queryKey:["smartPlugByPrinter",t.id]}),A.invalidateQueries({queryKey:["smart-plugs"]})}}),ru=ot({mutationFn:({id:it,action:Dt})=>oe.controlSmartPlug(it,Dt),onSuccess:()=>{F(C("printers.toast.scriptTriggered"))},onError:it=>F(it.message||C("printers.toast.failedToRunScript"),"error")}),rd=ot({mutationFn:()=>oe.stopPrint(t.id),onSuccess:()=>{F(C("printers.toast.printStopped")),A.invalidateQueries({queryKey:["printerStatus",t.id]})},onError:it=>F(it.message||C("printers.toast.failedToStopPrint"),"error")}),Vp=ot({mutationFn:()=>oe.pausePrint(t.id),onSuccess:()=>{F(C("printers.toast.printPaused")),A.invalidateQueries({queryKey:["printerStatus",t.id]})},onError:it=>F(it.message||C("printers.toast.failedToPausePrint"),"error")}),ka=ot({mutationFn:()=>oe.resumePrint(t.id),onSuccess:()=>{F(C("printers.toast.printResumed")),A.invalidateQueries({queryKey:["printerStatus",t.id]})},onError:it=>F(it.message||C("printers.toast.failedToResumePrint"),"error")}),Es=ot({mutationFn:()=>oe.clearPlate(t.id),onSuccess:()=>{F(C("queue.clearPlateSuccess")),A.setQueryData(["printerStatus",t.id],it=>it&&{...it,awaiting_plate_clear:!1}),A.invalidateQueries({queryKey:["printerStatus",t.id]}),A.invalidateQueries({queryKey:["queue",t.id]})},onError:it=>F(it.message||C("printers.toast.failedToSendCommand"),"error")}),Vo=ot({mutationFn:it=>oe.setChamberLight(t.id,it),onMutate:async it=>{await A.cancelQueries({queryKey:["printerStatus",t.id]});const Dt=A.getQueryData(["printerStatus",t.id]);return A.setQueryData(["printerStatus",t.id],Xt=>({...Xt,chamber_light:it})),{previousStatus:Dt}},onSuccess:(it,Dt)=>{F(`Chamber light ${Dt?"on":"off"}`)},onError:(it,Dt,Xt)=>{Xt?.previousStatus&&A.setQueryData(["printerStatus",t.id],Xt.previousStatus),F(it.message||C("printers.toast.failedToControlChamberLight"),"error")}}),wc=ot({mutationFn:it=>oe.setPrintSpeed(t.id,it),onMutate:async it=>{await A.cancelQueries({queryKey:["printerStatus",t.id]});const Dt=A.getQueryData(["printerStatus",t.id]);return A.setQueryData(["printerStatus",t.id],Xt=>({...Xt,speed_level:it})),{previousStatus:Dt}},onError:(it,Dt,Xt)=>{Xt?.previousStatus&&A.setQueryData(["printerStatus",t.id],Xt.previousStatus),F(it.message||C("printers.toast.failedToSetSpeed"),"error")}}),Sl=ot({mutationFn:it=>oe.setAirductMode(t.id,it),onMutate:async it=>{await A.cancelQueries({queryKey:["printerStatus",t.id]});const Dt=A.getQueryData(["printerStatus",t.id]);return A.setQueryData(["printerStatus",t.id],Xt=>({...Xt,airduct_mode:it==="cooling"?0:1})),{previousStatus:Dt}},onError:(it,Dt,Xt)=>{Xt?.previousStatus&&A.setQueryData(["printerStatus",t.id],Xt.previousStatus),F(it.message||C("printers.toast.failedToSendCommand"),"error")}}),ad=ot({mutationFn:({distance:it,force:Dt})=>oe.bedJog(t.id,it,Dt??!1),onError:it=>F(it.message||C("printers.toast.failedToSendCommand"),"error")}),Gp=ot({mutationFn:it=>oe.homeAxes(t.id,it),onSuccess:()=>{try{sessionStorage.setItem(`bambuddy.bedJog.warned.${t.id}`,"1")}catch{}F(C("printers.bedJog.homingStarted"))},onError:it=>F(it.message||C("printers.toast.failedToSendCommand"),"error")}),_l=ot({mutationFn:it=>oe.updatePrinter(t.id,{plate_detection_enabled:it}),onSuccess:()=>{A.invalidateQueries({queryKey:["printers"]}),F(_l.variables?C("printers.toast.plateCheckEnabled"):C("printers.toast.plateCheckDisabled"))},onError:it=>F(it.message||C("printers.toast.failedToUpdateSetting"),"error")}),id=(Ue?.state==="RUNNING"||Ue?.state==="PAUSE")&&(Ue?.printable_objects_count??0)>=2,{data:Om}=Qe({queryKey:["printableObjects",t.id],queryFn:()=>oe.getPrintableObjects(t.id),enabled:L||id,refetchInterval:L?5e3:id?3e4:!1}),[sd,od]=w.useState(null),au=w.useRef(!1),ci=w.useRef(null),iu=w.useRef(!1),zm=ot({mutationFn:({amsId:it,slotId:Dt})=>oe.refreshAmsSlot(t.id,it,Dt),onMutate:({amsId:it,slotId:Dt})=>{ci.current&&clearTimeout(ci.current),au.current=!1,iu.current=!1,od({amsId:it,slotId:Dt}),setTimeout(()=>{iu.current=!0},2e3),ci.current=setTimeout(()=>{od(null)},3e4)},onSuccess:it=>{F(it.message||C("printers.toast.rfidRereadInitiated"))},onError:it=>{F(it.message||C("printers.toast.failedToRereadRfid"),"error"),ci.current&&clearTimeout(ci.current),od(null)}}),[Ys,su]=w.useState(null),[kl,Nl]=w.useState(null),ou=async()=>{try{const it=await oe.getPlateReferences(t.id);su(it)}catch{}},Um=()=>{_l.mutate(!t.plate_detection_enabled)},Zg=async()=>{Ye(!0),Ie(null);const it=Ue?.chamber_light===!1;Je(it),it&&(await oe.setChamberLight(t.id,!0),await new Promise(Dt=>setTimeout(Dt,2500)));try{const Dt=await oe.checkPlateEmpty(t.id,{includeDebugImage:!0});Ie(Dt),ou()}catch(Dt){F(Dt instanceof Error?Dt.message:C("printers.toast.failedToCheckPlate"),"error"),it&&(await oe.setChamberLight(t.id,!1),Je(!1))}finally{Ye(!1)}},hn=w.useCallback(async()=>{Ie(null),nt&&(await oe.setChamberLight(t.id,!1),Je(!1))},[nt,t.id]),Bm=async it=>{Le(!0);try{const Dt=await oe.calibratePlateDetection(t.id,{label:it});if(Dt.success){F(Dt.message||C("printers.toast.calibrationSaved"),"success"),ou();const Xt=await oe.checkPlateEmpty(t.id,{includeDebugImage:!0});Ie(Xt)}else F(Dt.message||C("printers.toast.calibrationFailed"),"error")}catch(Dt){F(Dt instanceof Error?Dt.message:C("printers.toast.calibrationFailed"),"error")}finally{Le(!1)}},Hm=async(it,Dt)=>{try{await oe.updatePlateReferenceLabel(t.id,it,Dt),Nl(null),ou()}catch(Xt){F(Xt instanceof Error?Xt.message:C("printers.toast.failedToUpdateLabel"),"error")}},eb=async it=>{try{await oe.deletePlateReference(t.id,it),F(C("printers.toast.referenceDeleted"),"success"),ou();const Dt=await oe.checkPlateEmpty(t.id,{includeDebugImage:!0});Ie(Dt)}catch(Dt){F(Dt instanceof Error?Dt.message:C("printers.toast.failedToDeleteReference"),"error")}},Wp=async()=>{if(dt){tt(!0);try{await oe.updatePrinter(t.id,{plate_detection_roi:dt}),F(C("printers.toast.detectionAreaSaved"),"success"),Ae(null);const it=await oe.checkPlateEmpty(t.id,{includeDebugImage:!0});Ie(it)}catch(it){F(it instanceof Error?it.message:C("printers.toast.failedToSaveDetectionArea"),"error")}finally{tt(!1)}}};w.useEffect(()=>{const it=Dt=>{Dt.key==="Escape"&&Tt&&hn()};return window.addEventListener("keydown",it),()=>window.removeEventListener("keydown",it)},[Tt,hn]);const Go=w.useRef(null);w.useEffect(()=>{if(!sd)return;const it=Ue?.ams_status_main??0;return it!==0&&(au.current=!0,Go.current&&(clearTimeout(Go.current),Go.current=null)),au.current&&it===0&&(iu.current?(ci.current&&clearTimeout(ci.current),od(null)):Go.current||(Go.current=setTimeout(()=>{ci.current&&clearTimeout(ci.current),od(null)},2e3))),()=>{Go.current&&clearTimeout(Go.current)}},[Ue?.ams_status_main,sd]);const[Wo,Sc]=w.useState(null);if($p)return null;const Xy=()=>{switch(i){case 1:return"w-10 h-10";case 2:return"w-14 h-14";case 3:return"w-16 h-16";case 4:return"w-20 h-20";default:return"w-14 h-14"}},qm=()=>{switch(i){case 1:return"text-base truncate";case 2:return"text-lg";case 3:return"text-xl";case 4:return"text-2xl";default:return"text-lg"}},Kp=()=>{switch(i){case 1:return"mb-2";case 2:return"mb-4";case 3:return"mb-5";case 4:return"mb-6";default:return"mb-4"}},$m=Tr&&Ue?.state!=="RUNNING"&&Ue?.state!=="PAUSE"&&k("printers:control"),_e=it=>{it.preventDefault(),Mt.current++,Mt.current===1&&He(!0)},Et=it=>{it.preventDefault(),it.dataTransfer.dropEffect=$m?"copy":"none"},Fn=it=>{it.preventDefault(),Mt.current--,Mt.current===0&&He(!1)},kn=async it=>{if(it.preventDefault(),Mt.current=0,He(!1),!$m)return;const Xt=Array.from(it.dataTransfer.files)[0];if(!Xt)return;const ct=Xt.name.toLowerCase();if(!ct.endsWith(".gcode")&&!ct.includes(".gcode.")){F(C("printers.dropNotPrintable","Only .gcode and .gcode.3mf files can be printed"),"error");return}ht(!0);try{const Mn=await oe.uploadLibraryFile(Xt,null),xr=Mn.metadata?.sliced_for_model,lr=B0(t.model);if(xr&&lr&&xr.toLowerCase()!==lr.toLowerCase()){await oe.deleteLibraryFile(Mn.id).catch(()=>{}),F(C("printers.incompatibleFile","This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}",{slicedFor:xr,printerModel:lr}),"error");return}Be({id:Mn.id,filename:Mn.filename})}catch{F(C("common.uploadFailed","Upload failed"),"error")}finally{ht(!1)}};return a.jsxs(wt,{className:`relative ${N?"ring-2 ring-bambu-green":""} ${S?"cursor-pointer":""}`,onDragEnter:_e,onDragOver:Et,onDragLeave:Fn,onDrop:kn,children:[S&&a.jsx("div",{className:"absolute inset-0 z-20 flex items-start p-2",onClick:it=>{it.stopPropagation(),P?.(t.id)},children:N?a.jsx(As,{className:"w-5 h-5 text-bambu-green"}):a.jsx(mo,{className:"w-5 h-5 text-bambu-gray"})}),(st||at)&&a.jsx("div",{className:`absolute inset-0 z-10 rounded-xl border-2 border-dashed flex items-center justify-center transition-colors ${at?"bg-bambu-green/10 border-bambu-green/50":$m?"bg-bambu-green/10 border-bambu-green":"bg-red-500/10 border-red-500/50"}`,children:a.jsx("div",{className:"text-center",children:at?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-8 h-8 mx-auto mb-2 text-bambu-green animate-spin"}),a.jsx("p",{className:"text-sm font-medium text-bambu-green",children:C("common.uploading","Uploading...")})]}):$m?a.jsxs(a.Fragment,{children:[a.jsx(Mr,{className:"w-8 h-8 mx-auto mb-2 text-bambu-green"}),a.jsx("p",{className:"text-sm font-medium text-bambu-green",children:C("printers.dropToPrint","Drop to print")})]}):a.jsxs(a.Fragment,{children:[a.jsx(Bt,{className:"w-8 h-8 mx-auto mb-2 text-red-400"}),a.jsx("p",{className:"text-sm font-medium text-red-400",children:C("printers.cannotPrint","Printer busy")})]})})}),a.jsxs(St,{className:i>=3?"p-5":"",children:[a.jsxs("div",{className:Kp(),children:[a.jsxs("div",{className:"flex items-start justify-between gap-2",children:[a.jsxs("div",{className:"flex items-center gap-3 min-w-0 flex-1",children:[a.jsx("img",{src:eee(t.model),alt:t.model||C("common.printer"),className:`object-contain rounded-lg bg-bambu-dark flex-shrink-0 ${Xy()}`}),a.jsxs("div",{className:"min-w-0 flex-1",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("h3",{className:`font-semibold text-white ${qm()}`,children:t.name}),r==="compact"&&(()=>{const it=Ue?.connected&&Ue.hms_errors?cm(Ue.hms_errors):[],Dt=it.some(xr=>xr.severity<=2),Xt=it.length>0,ct=Ue?.connected?Dt?"bg-status-error":Xt?"bg-status-warning":"bg-status-ok":"bg-status-error",Mn=Ue?.connected?Xt?`${it.length} HMS ${it.length===1?"error":"errors"}`:C("printers.connection.connected"):C("printers.connection.offline");return a.jsx("div",{className:`w-2 h-2 rounded-full flex-shrink-0 ${ct}`,title:Mn})})()]}),a.jsxs("p",{className:"text-sm text-bambu-gray",children:[t.model||"Unknown Model",r==="expanded"&&Ue?.nozzles&&Ue.nozzles[0]?.nozzle_diameter&&a.jsxs("span",{className:"ml-1.5 text-bambu-gray",title:Ue.nozzles[0].nozzle_type||"Nozzle",children:["• ",Ue.nozzles[0].nozzle_diameter,"mm"]}),r==="expanded"&&n&&n.total_print_hours>0&&a.jsxs("span",{className:"ml-2 text-bambu-gray",children:[a.jsx(Yn,{className:"w-3 h-3 inline-block mr-1"}),Math.round(n.total_print_hours),"h"]})]})]})]}),a.jsxs("div",{className:"relative flex-shrink-0",children:[a.jsx(De,{variant:"ghost",size:"sm",onClick:()=>$(!E),children:a.jsx(ip,{className:"w-4 h-4"})}),E&&a.jsxs("div",{className:"absolute right-0 mt-2 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg z-20",children:[a.jsxs("button",{className:`w-full px-4 py-2 text-left text-sm flex items-center gap-2 ${k("printers:update")?"hover:bg-bambu-dark-tertiary":"opacity-50 cursor-not-allowed"}`,onClick:()=>{k("printers:update")&&(J(!0),$(!1))},title:k("printers:update")?void 0:C("printers.permission.noEdit"),children:[a.jsx(li,{className:"w-4 h-4"}),C("common.edit")]}),a.jsxs("button",{className:"w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2",onClick:()=>{Te(!0),$(!1)},children:[a.jsx(Cs,{className:"w-4 h-4"}),C("printers.printerInformation")]}),a.jsxs("button",{className:"w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2",onClick:()=>{$o.mutate(),$(!1)},children:[a.jsx(sr,{className:"w-4 h-4"}),C("printers.reconnect")]}),a.jsxs("button",{className:"w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2 disabled:opacity-50",disabled:zi.isPending,onClick:()=>{zi.mutate(),$(!1)},children:[a.jsx(uw,{className:`w-4 h-4 ${zi.isPending?"animate-spin":""}`}),C("printers.forceRefresh")]}),a.jsxs("button",{className:"w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2",onClick:()=>{K(!0),$(!1)},children:[a.jsx(gJ,{className:"w-4 h-4"}),C("printers.mqttDebug")]}),a.jsxs("button",{className:`w-full px-4 py-2 text-left text-sm flex items-center gap-2 ${k("printers:delete")?"text-red-400 hover:bg-bambu-dark-tertiary":"text-red-400/50 cursor-not-allowed"}`,onClick:()=>{k("printers:delete")&&(X(!0),$(!1))},title:k("printers:delete")?void 0:C("printers.permission.noDelete"),children:[a.jsx(Zt,{className:"w-4 h-4"}),C("common.delete")]})]})]})]}),r==="expanded"&&a.jsxs("div",{className:"flex flex-wrap items-center gap-2 mt-2",children:[a.jsxs("span",{className:`flex items-center gap-1.5 px-2 py-1 rounded-full text-xs ${Ue?.connected?"bg-status-ok/20 text-status-ok":"bg-status-error/20 text-status-error"}`,children:[Ue?.connected?a.jsx(Ty,{className:"w-3 h-3"}):a.jsx(Sp,{className:"w-3 h-3"}),Ue?.connected?C("printers.connection.connected"):C("printers.connection.offline")]}),Ue?.connected&&Ue?.wired_network&&a.jsxs("span",{className:"flex items-center gap-1 px-2 py-1 rounded-full text-xs bg-status-ok/20 text-status-ok",title:C("printers.connection.ethernet","Ethernet"),children:[a.jsx(KI,{className:"w-3 h-3"}),C("printers.connection.ethernet","Ethernet")]}),Ue?.connected&&!Ue?.wired_network&&xn!=null&&a.jsxs("span",{className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs ${xn>=-50||xn>=-60?"bg-status-ok/20 text-status-ok":xn>=-70?"bg-status-warning/20 text-status-warning":xn>=-80?"bg-orange-500/20 text-orange-600":"bg-status-error/20 text-status-error"}`,title:`WiFi: ${xn} dBm - ${C(tee(xn).labelKey)}`,children:[a.jsx(hJ,{className:"w-3 h-3"}),xn,"dBm"]}),Ue?.connected&&(()=>{const it=Ue.hms_errors?cm(Ue.hms_errors):[];return a.jsxs("button",{onClick:()=>Y(!0),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs cursor-pointer hover:opacity-80 transition-opacity ${it.length>0?it.some(Dt=>Dt.severity<=2)?"bg-status-error/20 text-status-error":"bg-status-warning/20 text-status-warning":"bg-status-ok/20 text-status-ok"}`,title:C("printers.clickToViewHmsErrors"),children:[a.jsx(Cn,{className:"w-3 h-3"}),it.length>0?it.length:"OK"]})})(),n&&a.jsxs("button",{onClick:()=>T("/maintenance"),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs cursor-pointer hover:opacity-80 transition-opacity ${n.due_count>0?"bg-status-error/20 text-status-error":n.warning_count>0?"bg-status-warning/20 text-status-warning":"bg-status-ok/20 text-status-ok"}`,title:n.due_count>0||n.warning_count>0?`${n.due_count>0?`${n.due_count} maintenance due`:""}${n.due_count>0&&n.warning_count>0?", ":""}${n.warning_count>0?`${n.warning_count} due soon`:""} - Click to view`:C("printers.maintenanceUpToDate"),children:[a.jsx(xg,{className:"w-3 h-3"}),n.due_count>0||n.warning_count>0?n.due_count+n.warning_count:"OK"]}),yl>0&&a.jsxs("button",{onClick:()=>T("/queue"),className:"flex items-center gap-1 px-2 py-1 rounded-full text-xs bg-indigo-500/20 text-indigo-400 hover:opacity-80 transition-opacity",title:C("printers.queue.inQueue",{count:yl}),children:[a.jsx(ia,{className:"w-3 h-3"}),yl]}),v&&rt?.current_version&&rt?.latest_version?a.jsxs("button",{onClick:()=>zt(!0),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs hover:opacity-80 transition-opacity ${rt.update_available?"bg-orange-500/20 text-orange-400":"bg-status-ok/20 text-status-ok"}`,title:rt.update_available?C("printers.firmwareUpdateAvailable",{current:rt.current_version,latest:rt.latest_version}):C("printers.firmwareUpToDate",{version:rt.current_version}),children:[rt.update_available?a.jsx(aa,{className:"w-3 h-3"}):a.jsx(wr,{className:"w-3 h-3"}),rt.current_version]}):Ue?.firmware_version?a.jsx("span",{className:"flex items-center gap-1 px-2 py-1 rounded-full text-xs bg-bambu-dark-tertiary/50 text-bambu-gray",children:Ue.firmware_version}):null,Ue?.connected&&["X1C","X1","X1E","X2D","P1S","P1P","P2S","H2D","H2D Pro","H2C","H2S"].includes(t.model??"")&&a.jsx("span",{className:`flex items-center px-2 py-1 rounded-full text-xs ${Ue.door_open?"bg-yellow-500/20 text-yellow-400":"bg-status-ok/20 text-status-ok"}`,title:Ue.door_open?C("printers.door.open"):C("printers.door.closed"),children:Ue.door_open?a.jsx(bge,{className:"w-3 h-3"}):a.jsx(fge,{className:"w-3 h-3"})})]})]}),z&&a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50",children:a.jsx(wt,{className:"w-full max-w-md mx-4",children:a.jsxs(St,{children:[a.jsxs("div",{className:"flex items-start gap-3 mb-4",children:[a.jsx("div",{className:"p-2 rounded-full bg-red-500/20",children:a.jsx(Cn,{className:"w-5 h-5 text-red-400"})}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-lg font-semibold text-white",children:C("printers.confirm.deleteTitle")}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:C("printers.confirm.deleteMessage",{name:t.name})})]})]}),a.jsx("div",{className:"bg-bambu-dark rounded-lg p-3 mb-4",children:a.jsxs("label",{className:"flex items-start gap-3 cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:R,onChange:it=>ne(it.target.checked),className:"mt-0.5 w-4 h-4 rounded border-bambu-gray bg-bambu-dark-secondary text-bambu-green focus:ring-bambu-green focus:ring-offset-0"}),a.jsxs("div",{children:[a.jsx("span",{className:"text-sm text-white",children:C("printers.deleteArchives")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-0.5",children:C(R?"printers.confirm.deleteArchivesNote":"printers.confirm.keepArchivesNote")})]})]})}),a.jsxs("div",{className:"flex justify-end gap-2",children:[a.jsx(De,{variant:"secondary",onClick:()=>{X(!1),ne(!0)},children:C("common.cancel")}),a.jsx(De,{variant:"danger",onClick:()=>{ls.mutate({deleteArchives:R}),X(!1),ne(!0)},children:"Delete"})]})]})})}),Ue?.connected&&a.jsxs(a.Fragment,{children:[r==="compact"?a.jsx("div",{className:"mt-2",children:Ue.state==="RUNNING"||Ue.state==="PAUSE"?a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("div",{className:"flex-1 bg-bambu-dark-tertiary rounded-full h-1.5",children:a.jsx("div",{className:`${Ue.state==="PAUSE"?"bg-status-warning":"bg-bambu-green"} h-1.5 rounded-full transition-all`,style:{width:`${Ue.progress||0}%`}})}),a.jsxs("div",{className:"flex flex-shrink-0 items-center gap-1.5",children:[a.jsxs("span",{className:"text-xs text-white",children:[Math.round(Ue.progress||0),"%"]}),nd]})]}):a.jsxs("div",{className:"flex items-center justify-between gap-2",children:[a.jsxs("div",{className:"min-w-0 flex-1 flex items-center gap-1.5",children:[a.jsx("p",{className:"min-w-0 truncate text-xs text-bambu-gray",children:KD(Ue.state,Ue.stg_cur_name)}),nd]}),vl&&a.jsx("button",{type:"button",onClick:()=>Es.mutate(),disabled:Es.isPending||!k("printers:clear_plate"),"aria-label":C("printers.plateStatus.markCleared"),className:"inline-flex h-5 w-5 flex-shrink-0 items-center justify-center rounded-full bg-yellow-500/20 border border-yellow-400/40 text-yellow-400 hover:bg-yellow-500/30 transition-colors disabled:opacity-50",title:k("printers:clear_plate")?C("printers.plateStatus.markCleared"):C("printers.permission.noControl"),children:Es.isPending?a.jsx(mt,{className:"w-3 h-3 animate-spin"}):a.jsx(yK,{className:"w-3 h-3"})})]})}):a.jsxs(a.Fragment,{children:[a.jsxs("div",{className:"mb-4 p-3 bg-bambu-dark rounded-lg relative",children:[a.jsxs("button",{onClick:()=>ee(!0),disabled:!(Ue.state==="RUNNING"||Ue.state==="PAUSE")||(Ue.printable_objects_count??0)<2||!k("printers:control"),className:`absolute top-2 right-2 p-1.5 rounded transition-colors z-10 ${(Ue.state==="RUNNING"||Ue.state==="PAUSE")&&(Ue.printable_objects_count??0)>=2&&k("printers:control")?"text-bambu-gray hover:text-white hover:bg-white/10":"text-bambu-gray/30 cursor-not-allowed"}`,title:k("printers:control")?Ue.state==="RUNNING"||Ue.state==="PAUSE"?(Ue.printable_objects_count??0)>=2?C("printers.skipObjects.tooltip"):C("printers.skipObjects.requiresMultiple"):C("printers.skipObjects.onlyWhilePrinting"):C("printers.permission.noControl"),children:[a.jsx(pT,{className:"w-4 h-4"}),Om&&Om.skipped_count>0&&a.jsx("span",{className:"absolute -top-1 -right-1 min-w-[16px] h-4 px-1 flex items-center justify-center text-[10px] font-bold bg-red-500 text-white rounded-full",children:Om.skipped_count})]}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(dGe,{url:Ue.state==="RUNNING"||Ue.state==="PAUSE"?Ue.cover_url:null,printName:(Ue.state==="RUNNING"||Ue.state==="PAUSE")&&i6(Ue.subtask_name||Ue.current_print||null,Ue.gcode_file,C,Yt)||void 0}),a.jsx("div",{className:"flex-1 min-w-0",children:Ue.current_print&&(Ue.state==="RUNNING"||Ue.state==="PAUSE")?a.jsxs(a.Fragment,{children:[a.jsxs("div",{className:"mb-1 flex items-center gap-2",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:KD(Ue.state,Ue.stg_cur_name)}),nd]}),a.jsx("p",{className:"text-white text-sm mb-2 truncate",children:i6(Ue.subtask_name||Ue.current_print||null,Ue.gcode_file,C,Yt)}),a.jsxs("div",{className:"flex items-center justify-between text-sm",children:[a.jsx("div",{className:"flex-1 bg-bambu-dark-tertiary rounded-full h-2 mr-3",children:a.jsx("div",{className:`${Ue.state==="PAUSE"?"bg-status-warning":"bg-bambu-green"} h-2 rounded-full transition-all`,style:{width:`${Ue.progress||0}%`}})}),a.jsxs("span",{className:"text-white",children:[Math.round(Ue.progress||0),"%"]})]}),a.jsxs("div",{className:"flex items-center gap-3 mt-2 text-xs text-bambu-gray",children:[Ue.remaining_time!=null&&Ue.remaining_time>0&&a.jsxs(a.Fragment,{children:[a.jsxs("span",{className:"flex items-center gap-1",children:[a.jsx(Yn,{className:"w-3 h-3"}),Qi(Ue.remaining_time*60)]}),a.jsxs("span",{className:"text-bambu-green font-medium",title:C("printers.estimatedCompletion"),children:["ETA ",oO(Ue.remaining_time,p,C)]})]}),Ue.layer_num!=null&&Ue.total_layers!=null&&Ue.total_layers>0&&a.jsxs("span",{className:"flex items-center gap-1",children:[a.jsx(ia,{className:"w-3 h-3"}),Ue.layer_num,"/",Ue.total_layers]}),mr&&a.jsxs("span",{className:"flex items-center gap-1",title:`Started by ${mr}`,children:[a.jsx(vm,{className:"w-3 h-3"}),mr]})]})]}):a.jsxs(a.Fragment,{children:[a.jsx("p",{className:"text-sm text-bambu-gray mb-1",children:C("printers.sort.status")}),a.jsxs("div",{className:"mb-2 flex items-center gap-2",children:[a.jsx("p",{className:"text-white text-sm",children:KD(Ue.state,Ue.stg_cur_name)}),nd]}),a.jsxs("div",{className:"flex items-center justify-between text-sm",children:[a.jsx("div",{className:"flex-1 bg-bambu-dark-tertiary rounded-full h-2 mr-3",children:a.jsx("div",{className:"bg-bambu-dark-tertiary h-2 rounded-full"})}),a.jsx("span",{className:"text-bambu-gray",children:"—"})]}),Ms?a.jsxs("p",{className:"text-xs text-bambu-gray mt-2 truncate",title:Ms.print_name||Ms.filename,children:["Last: ",Ms.print_name||Ms.filename,Ms.completed_at&&a.jsxs("span",{className:"ml-1 text-bambu-gray/60",children:["• ",yg(Ms.completed_at,{month:"short",day:"numeric"})]})]}):a.jsx("p",{className:"text-xs text-bambu-gray mt-2",children:C("printers.readyToPrint")})]})})]})]}),a.jsx(kEe,{printerId:t.id,printerModel:t.model,loadedFilamentTypes:bt,loadedFilaments:Ot})]}),Ue.temperatures&&r==="expanded"&&(()=>{const it=Ue.temperatures.nozzle_heating||Ue.temperatures.nozzle_2_heating||!1,Dt=Ue.temperatures.bed_heating||!1,Xt=Ue.temperatures.chamber_heating||!1,ct=t.nozzle_count===2||Ue.temperatures.nozzle_2!==void 0,Mn=Ue.active_extruder===1?"L":"R",xr=Ue.nozzle_rack?.find(La=>La.id===1),lr=Ue.nozzle_rack?.find(La=>La.id===0),Or=lr||xr;return a.jsxs("div",{className:"flex items-stretch gap-1.5 flex-wrap",children:[a.jsxs("div",{className:"text-center px-2 py-1.5 bg-bambu-dark rounded-lg flex-1 flex flex-col justify-center items-center",children:[a.jsx(GD,{className:"w-3.5 h-3.5 mb-0.5",color:"text-orange-400",isHeating:it}),Ue.temperatures.nozzle_2!==void 0?a.jsxs(a.Fragment,{children:[a.jsx("p",{className:"text-[9px] text-bambu-gray",children:"L / R"}),a.jsxs("p",{className:"text-[11px] text-white",children:[Math.round(Ue.temperatures.nozzle||0),"° / ",Math.round(Ue.temperatures.nozzle_2||0),"°"]})]}):Or?a.jsx(Cie,{slot:Or,index:0,activeStatus:!0,filamentName:Or.filament_id?Lt?.[Or.filament_id]?.name:void 0,children:a.jsxs("div",{className:"cursor-default",children:[a.jsx("p",{className:"text-[9px] text-bambu-gray",children:C("printers.temperatures.nozzle")}),a.jsxs("p",{className:"text-[11px] text-white",children:[Math.round(Ue.temperatures.nozzle||0),"°C"]})]})}):a.jsxs(a.Fragment,{children:[a.jsx("p",{className:"text-[9px] text-bambu-gray",children:C("printers.temperatures.nozzle")}),a.jsxs("p",{className:"text-[11px] text-white",children:[Math.round(Ue.temperatures.nozzle||0),"°C"]})]})]}),a.jsxs("div",{className:"text-center px-2 py-1.5 bg-bambu-dark rounded-lg flex-1 flex flex-col justify-center items-center",children:[a.jsx(GD,{className:"w-3.5 h-3.5 mb-0.5",color:"text-blue-400",isHeating:Dt}),a.jsx("p",{className:"text-[9px] text-bambu-gray",children:C("printers.temperatures.bed")}),a.jsxs("p",{className:"text-[11px] text-white",children:[Math.round(Ue.temperatures.bed||0),"°C"]})]}),Ue.temperatures.chamber!==void 0&&a.jsxs("div",{className:"text-center px-2 py-1.5 bg-bambu-dark rounded-lg flex-1 flex flex-col justify-center items-center",children:[a.jsx(GD,{className:"w-3.5 h-3.5 mb-0.5",color:"text-green-400",isHeating:Xt}),a.jsx("p",{className:"text-[9px] text-bambu-gray",children:C("printers.temperatures.chamber")}),a.jsxs("p",{className:"text-[11px] text-white",children:[Math.round(Ue.temperatures.chamber||0),"°C"]})]}),ct&&a.jsx(nGe,{leftSlot:xr,rightSlot:lr,activeNozzle:Mn,filamentInfo:Lt,children:a.jsxs("div",{className:"text-center px-3 py-1.5 bg-bambu-dark rounded-lg h-full flex flex-col justify-center items-center cursor-default",title:C("printers.activeNozzle",{nozzle:C(Mn==="L"?"common.left":"common.right")}),children:[a.jsx(cGe,{className:"w-3.5 h-3.5 mb-0.5 text-amber-400"}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsxs("span",{className:`text-[11px] font-bold ${Mn==="L"?"text-amber-400":"text-gray-500"}`,children:["L",xr?.nozzle_diameter?` ${xr.nozzle_diameter}`:""]}),a.jsx("span",{className:"text-[9px] text-bambu-gray/40",children:"·"}),a.jsxs("span",{className:`text-[11px] font-bold ${Mn==="R"?"text-amber-400":"text-gray-500"}`,children:["R",lr?.nozzle_diameter?` ${lr.nozzle_diameter}`:""]})]}),a.jsx("p",{className:"text-[9px] text-bambu-gray",children:C("printers.temperatures.nozzle")})]})}),Ue.nozzle_rack&&Ue.nozzle_rack.some(La=>La.id>=2)&&a.jsx(rGe,{slots:Ue.nozzle_rack,filamentInfo:Lt})]})})(),r==="expanded"&&vl&&a.jsxs("button",{type:"button",onClick:()=>Es.mutate(),disabled:Es.isPending||!k("printers:clear_plate"),className:"mt-2 w-full inline-flex items-center justify-center gap-2 px-3 py-1.5 rounded-lg bg-yellow-500/20 border border-yellow-400/40 text-yellow-400 hover:bg-yellow-500/30 transition-colors text-xs font-medium disabled:opacity-50",title:k("printers:clear_plate")?C("printers.plateStatus.markCleared"):C("printers.permission.noControl"),children:[Es.isPending?a.jsx(mt,{className:"w-3 h-3 animate-spin"}):a.jsx(yK,{className:"w-4 h-4"}),C("printers.plateStatus.markCleared")]}),r==="expanded"&&(()=>{const it=Ue.state==="RUNNING",Dt=Ue.state==="PAUSE",Xt=it||Dt,ct=rd.isPending||Vp.isPending||ka.isPending,Mn=Ue.cooling_fan_speed,xr=Ue.big_fan1_speed,lr=Ue.big_fan2_speed;return a.jsxs("div",{className:"mt-3",children:[a.jsxs("div",{className:"flex items-center gap-2 mb-2",children:[a.jsx("span",{className:"text-[10px] uppercase tracking-wider text-bambu-gray font-medium",children:C("printers.controls")}),a.jsx("div",{className:"flex-1 h-px bg-bambu-dark-tertiary/30"})]}),a.jsxs("div",{className:"flex flex-wrap items-start justify-between gap-x-2 gap-y-2",children:[a.jsxs("div",{className:"flex flex-wrap items-center gap-x-2 gap-y-1.5 min-w-0",children:[a.jsxs("div",{className:`flex items-center gap-1 px-1.5 py-1 rounded ${Mn&&Mn>0?"bg-cyan-500/10":"bg-bambu-dark"}`,title:C("printers.fans.partCooling"),children:[a.jsx(aJ,{className:`w-3.5 h-3.5 ${Mn&&Mn>0?"text-cyan-400":"text-bambu-gray/50"}`}),a.jsxs("span",{className:`text-[10px] ${Mn&&Mn>0?"text-cyan-400":"text-bambu-gray/50"}`,children:[Mn??0,"%"]})]}),a.jsxs("div",{className:`flex items-center gap-1 px-1.5 py-1 rounded ${xr&&xr>0?"bg-blue-500/10":"bg-bambu-dark"}`,title:C("printers.fans.auxiliary"),children:[a.jsx(yJ,{className:`w-3.5 h-3.5 ${xr&&xr>0?"text-blue-400":"text-bambu-gray/50"}`}),a.jsxs("span",{className:`text-[10px] ${xr&&xr>0?"text-blue-400":"text-bambu-gray/50"}`,children:[xr??0,"%"]})]}),a.jsxs("div",{className:`flex items-center gap-1 px-1.5 py-1 rounded ${lr&&lr>0?"bg-green-500/10":"bg-bambu-dark"}`,title:C("printers.fans.chamber"),children:[a.jsx(Bpe,{className:`w-3.5 h-3.5 ${lr&&lr>0?"text-green-400":"text-bambu-gray/50"}`}),a.jsxs("span",{className:`text-[10px] ${lr&&lr>0?"text-green-400":"text-bambu-gray/50"}`,children:[lr??0,"%"]})]}),a.jsx("div",{className:"w-px h-5 bg-bambu-gray/30"}),["P2S","X2D","H2D","H2C","H2S"].includes(t.model??"")&&(()=>{const Or=Ue.airduct_mode===1,La=Or?qu:KH,un=Or?"text-orange-400":"text-sky-400",Rn=Or?"bg-orange-500/10 hover:bg-orange-500/20":"bg-sky-500/10 hover:bg-sky-500/20";return a.jsxs("div",{className:"relative",children:[a.jsxs("button",{onClick:()=>G(I===t.id?null:t.id),disabled:!k("printers:control"),className:`flex items-center gap-1 px-1.5 py-1 rounded transition-colors ${Rn} disabled:opacity-50 disabled:cursor-not-allowed`,title:C("printers.airduct.title"),children:[a.jsx(La,{className:`w-3.5 h-3.5 ${un}`}),a.jsx("span",{className:`text-[10px] ${un}`,children:C(Or?"printers.airduct.heating":"printers.airduct.cooling")})]}),I===t.id&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-40",onClick:()=>G(null)}),a.jsx("div",{className:"absolute bottom-full left-0 mb-1 z-50 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg py-1 min-w-[130px]",children:[{mode:"cooling",label:C("printers.airduct.cooling"),modeId:0},{mode:"heating",label:C("printers.airduct.heating"),modeId:1}].map(({mode:Na,label:ni,modeId:di})=>a.jsxs("button",{onClick:()=>{Sl.mutate(Na),G(null)},className:`w-full text-left px-3 py-1.5 text-xs transition-colors flex items-center gap-2 ${Ue.airduct_mode===di?"text-bambu-green bg-bambu-green/10":"text-white hover:bg-bambu-dark-tertiary"}`,children:[Na==="heating"?a.jsx(qu,{className:"w-3 h-3"}):a.jsx(KH,{className:"w-3 h-3"}),ni]},Na))})]})]})})(),(()=>{const La={1:"50%",2:"100%",3:"124%",4:"166%"}[Ue.speed_level]||"100%";return a.jsxs("div",{className:"relative",children:[a.jsxs("button",{onClick:()=>ce(O===t.id?null:t.id),disabled:!Xt||!k("printers:control"),className:`flex items-center gap-1 px-1.5 py-1 rounded transition-colors ${Xt?"bg-amber-500/10 hover:bg-amber-500/20":"bg-bambu-dark cursor-not-allowed"}`,title:Xt?C("printers.speed.title"):void 0,children:[a.jsx(aS,{className:`w-3.5 h-3.5 ${Xt?"text-amber-400":"text-bambu-gray/50"}`}),a.jsx("span",{className:`text-[10px] ${Xt?"text-amber-400":"text-bambu-gray/50"}`,children:La})]}),O===t.id&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-40",onClick:()=>ce(null)}),a.jsx("div",{className:"absolute bottom-full left-0 mb-1 z-50 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg py-1 min-w-[130px]",children:[{mode:1,label:C("printers.speed.silent")},{mode:2,label:C("printers.speed.standard")},{mode:3,label:C("printers.speed.sport")},{mode:4,label:C("printers.speed.ludicrous")}].map(({mode:un,label:Rn})=>a.jsx("button",{onClick:()=>{wc.mutate(un),ce(null)},className:`w-full text-left px-3 py-1.5 text-xs transition-colors ${Ue.speed_level===un?"text-bambu-green bg-bambu-green/10":"text-white hover:bg-bambu-dark-tertiary"}`,children:Rn},un))})]})]})})(),a.jsx("div",{className:"w-px h-5 bg-bambu-gray/30"}),(()=>{const Or=k("printers:control"),La=Xt||!Or,un=Rn=>{const Na=Rn*te*1,ni=`bambuddy.bedJog.warned.${t.id}`,di=(()=>{try{return sessionStorage.getItem(ni)==="1"}catch{return!1}})();W(null),di?ad.mutate({distance:Na,force:!0}):he({distance:Na})};return a.jsxs("div",{className:"relative",children:[a.jsxs("button",{onClick:()=>W(q===t.id?null:t.id),disabled:La,className:`flex items-center gap-1 px-1.5 py-1 rounded transition-colors ${La?"bg-bambu-dark cursor-not-allowed":"bg-indigo-500/10 hover:bg-indigo-500/20"}`,title:C(Or?Xt?"printers.bedJog.disabledWhilePrinting":"printers.bedJog.title":"printers.permission.noControl"),children:[a.jsx(rxe,{className:`w-3.5 h-3.5 ${La?"text-bambu-gray/50":"text-indigo-400"}`}),a.jsx("span",{className:`text-[10px] ${La?"text-bambu-gray/50":"text-indigo-400"}`,children:C("printers.bedJog.bed")}),a.jsxs("span",{className:`text-[10px] tabular-nums opacity-70 ${La?"text-bambu-gray/50":"text-indigo-400"}`,children:[te,"mm"]})]}),q===t.id&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-40",onClick:()=>W(null)}),a.jsxs("div",{className:"absolute bottom-full left-0 mb-1 z-50 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg p-2 min-w-[140px]",children:[a.jsxs("div",{className:"flex items-center justify-between gap-1 mb-2",children:[a.jsx("button",{onClick:()=>un(-1),className:"flex-1 flex items-center justify-center py-1.5 rounded bg-indigo-500/15 hover:bg-indigo-500/30 text-indigo-300","aria-label":C("printers.bedJog.up"),children:a.jsx(wp,{className:"w-4 h-4"})}),a.jsx("button",{onClick:()=>un(1),className:"flex-1 flex items-center justify-center py-1.5 rounded bg-indigo-500/15 hover:bg-indigo-500/30 text-indigo-300","aria-label":C("printers.bedJog.down"),children:a.jsx(pg,{className:"w-4 h-4"})})]}),a.jsx("div",{className:"text-[9px] uppercase tracking-wider text-bambu-gray/70 px-1 mb-1",children:C("printers.bedJog.step")}),a.jsx("div",{className:"flex gap-1",children:[1,10,50].map(Rn=>a.jsx("button",{onClick:()=>le(Rn),className:`flex-1 px-1 py-1 rounded text-[10px] transition-colors ${te===Rn?"bg-bambu-green/20 text-bambu-green":"bg-bambu-dark text-bambu-gray hover:bg-bambu-dark-tertiary"}`,children:Rn},Rn))})]})]})]})})()]}),a.jsxs("div",{className:"flex items-center gap-2 flex-shrink-0 max-[550px]:self-start",children:[a.jsxs("button",{onClick:()=>M(!0),disabled:!Xt||ct||!k("printers:control"),className:`
+          `,style:{maxWidth:"calc(100vw - 24px)"},onMouseEnter:T,onMouseLeave:F,children:a.jsxs("div",{className:"w-52 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl overflow-hidden backdrop-blur-sm p-2.5 space-y-2",children:[a.jsx("div",{className:"text-[10px] uppercase tracking-wider text-bambu-gray font-medium",children:n}),a.jsxs("div",{className:"flex items-center justify-between gap-2",children:[a.jsx("span",{className:"text-[10px] tracking-wide text-bambu-gray font-medium shrink-0",children:l("printers.amsPopup.serialNumber")}),a.jsx("span",{className:"text-[10px] text-white font-mono truncate",children:t.serial_number||"—"})]}),a.jsxs("div",{className:"flex items-center justify-between gap-2",children:[a.jsx("span",{className:"text-[10px] tracking-wide text-bambu-gray font-medium shrink-0",children:l("printers.amsPopup.firmwareVersion")}),a.jsx("span",{className:"text-[10px] text-white font-mono truncate",children:t.sw_ver||"—"})]}),a.jsx("div",{className:"h-px bg-bambu-dark-tertiary/50"}),a.jsxs("div",{className:"space-y-1",children:[a.jsx("span",{className:"text-[10px] text-bambu-gray font-medium block",children:l("printers.amsPopup.friendlyName")}),a.jsx("input",{type:"text",value:p,onChange:$=>i&&f($.target.value),onKeyDown:$=>$.key==="Enter"&&k(),onFocus:()=>N(!0),onBlur:()=>{N(!1),A.current&&clearTimeout(A.current),A.current=setTimeout(()=>d(!1),200)},placeholder:i?l("printers.amsPopup.friendlyNamePlaceholder"):r?.[t.id]||"—",disabled:!i,title:i?void 0:l("printers.amsPopup.noEditPermission"),className:"w-full bg-bambu-dark border border-bambu-dark-tertiary rounded px-2 py-1 text-xs text-white placeholder-bambu-gray/60 focus:outline-none focus:border-bambu-green disabled:opacity-50 disabled:cursor-not-allowed",maxLength:100}),i&&a.jsxs("div",{className:"space-y-1",children:[b&&a.jsx("p",{className:"text-[10px] text-red-400 break-words",children:b}),a.jsxs("div",{className:"flex gap-1 justify-end",children:[a.jsx("button",{onClick:k,disabled:x,className:"px-2 py-0.5 text-[10px] bg-bambu-green text-white rounded hover:bg-bambu-green/80 disabled:opacity-50",children:l("printers.amsPopup.save")}),r?.[t.id]&&a.jsx("button",{onClick:E,disabled:x,className:"px-2 py-0.5 text-[10px] bg-bambu-dark-tertiary text-bambu-gray rounded hover:bg-bambu-dark-tertiary/70 disabled:opacity-50",children:l("printers.amsPopup.clear")})]})]})]})]})})]})}const IL={PLA:{n3f:45,n3s:45,n3f_hours:12,n3s_hours:12},PETG:{n3f:65,n3s:65,n3f_hours:12,n3s_hours:12},TPU:{n3f:65,n3s:75,n3f_hours:12,n3s_hours:18},ABS:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},ASA:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:12},PC:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PVA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:18}};function DK({printer:t,hideIfDisconnected:e,maintenanceInfo:n,viewMode:r="expanded",cardSize:i=2,amsThresholds:s,spoolmanEnabled:o=!1,linkedSpools:l,spoolmanUrl:c,spoolmanSyncMode:d,onGetAssignment:u,onUnassignSpool:m,timeFormat:p="system",cameraViewMode:f="window",onOpenEmbeddedCamera:x,checkPrinterFirmware:v=!0,dryingPresets:b=IL,requirePlateClear:g=!1,selectionMode:S=!1,isSelected:N=!1,onToggleSelect:P}){const{t:C}=_t(),A=tn(),T=as(),{showToast:F}=rn(),{hasPermission:k}=gr(),[E,$]=w.useState(!1),[z,X]=w.useState(!1),[R,ne]=w.useState(!0),[re,J]=w.useState(!1),[ue,ie]=w.useState(!1),[se,K]=w.useState(!1),[ae,pe]=w.useState(!1),[be,fe]=w.useState(!1),[B,Y]=w.useState(!1),[D,M]=w.useState(!1),[U,Q]=w.useState(!1),[O,ce]=w.useState(null),[I,G]=w.useState(null),[q,W]=w.useState(null),[te,le]=w.useState(10),[ye,he]=w.useState(null),[me,H]=w.useState(!1),[L,ee]=w.useState(!1),[ge,ke]=w.useState(!1),[je,Te]=w.useState(!1),xe=w.useCallback(()=>Te(!1),[]),[Fe,Be]=w.useState(null),[Ce,ze]=w.useState(null),[Me,Oe]=w.useState("n3f"),[Ge,et]=w.useState("PLA"),[ve,Xe]=w.useState(50),[Pe,Ve]=w.useState(4),[we,de]=w.useState(!1),[Se,$e]=w.useState(null),[st,He]=w.useState(!1),[at,ht]=w.useState(!1),Mt=w.useRef(0),[qt,Vt]=w.useState(null),[Gt,Qt]=w.useState(null),[an,mn]=w.useState(null),[dn,jt]=w.useState(null),[Jt,zt]=w.useState(!1),[Tt,Ie]=w.useState(null),[Re,Ye]=w.useState(!1),[Ze,Le]=w.useState(!1),[dt,Ae]=w.useState(null),[We,tt]=w.useState(!1),[nt,Je]=w.useState(!1),{data:Ue}=Qe({queryKey:["printerStatus",t.id],queryFn:()=>oe.getPrinterStatus(t.id),refetchInterval:3e4}),{data:rt}=Qe({queryKey:["firmwareUpdate",t.id],queryFn:()=>Gk.checkPrinterUpdate(t.id),staleTime:300*1e3,refetchInterval:300*1e3,enabled:v&&k("firmware:read")}),Ct=w.useMemo(()=>{const it=new Set;if(Ue?.ams)for(const Dt of Ue.ams)for(const Xt of Dt.tray||[])Xt.tray_info_idx&&it.add(Xt.tray_info_idx);for(const Dt of Ue?.vt_tray??[])Dt.tray_info_idx&&it.add(Dt.tray_info_idx);if(Ue?.nozzle_rack)for(const Dt of Ue.nozzle_rack)Dt.filament_id&&it.add(Dt.filament_id);return Array.from(it)},[Ue?.ams,Ue?.vt_tray,Ue?.nozzle_rack]),bt=w.useMemo(()=>{const it=new Set;if(Ue?.ams)for(const Dt of Ue.ams)for(const Xt of Dt.tray||[])Xt.tray_type&&it.add(Xt.tray_type.toUpperCase());for(const Dt of Ue?.vt_tray??[])Dt.tray_type&&it.add(Dt.tray_type.toUpperCase());return it},[Ue?.ams,Ue?.vt_tray]),Ot=w.useMemo(()=>{const it=new Set;if(Ue?.ams){for(const Dt of Ue.ams)for(const Xt of Dt.tray||[])if(Xt.tray_type&&Xt.tray_color){const ct=Xt.tray_color.replace("#","").toLowerCase().slice(0,6);it.add(`${Xt.tray_type.toUpperCase()}:${ct}`)}}for(const Dt of Ue?.vt_tray??[])if(Dt.tray_type&&Dt.tray_color){const Xt=Dt.tray_color.replace("#","").toLowerCase().slice(0,6);it.add(`${Dt.tray_type.toUpperCase()}:${Xt}`)}return it},[Ue?.ams,Ue?.vt_tray]),{data:Lt}=Qe({queryKey:["filamentInfo",Ct],queryFn:()=>oe.getFilamentInfo(Ct),enabled:Ct.length>0,staleTime:300*1e3}),{data:Ft}=Qe({queryKey:["slotPresets",t.id],queryFn:()=>oe.getSlotPresets(t.id),staleTime:120*1e3}),Ke=Ue?.state==="RUNNING"||Ue?.state==="PAUSE"?Ue?.current_archive_id??null:null,{data:Ht}=Qe({queryKey:["archive-plates",Ke],queryFn:()=>oe.getArchivePlates(Ke),enabled:Ke!=null,staleTime:300*1e3}),Yt=!Ht?.is_multi_plate||Ue?.current_plate_id==null?null:Ht.plates.find(Dt=>Dt.index===Ue.current_plate_id)?.name||C("printers.plateNumber","Plate {{number}}",{number:Ue.current_plate_id}),{data:on,refetch:wn}=Qe({queryKey:["amsLabels",t.id],queryFn:()=>oe.getAmsLabels(t.id),staleTime:300*1e3}),[gn,_n]=w.useState(null);w.useEffect(()=>{Ue?.wifi_signal!=null&&_n(Ue.wifi_signal)},[Ue?.wifi_signal]);const xn=Ue?.wifi_signal??gn,br=w.useRef(void 0);w.useEffect(()=>{Ue?.connected!==void 0&&(br.current=Ue.connected)},[Ue?.connected]);const Tr=Ue?.connected??br.current,On=w.useRef({});w.useEffect(()=>{Ue?.ams_extruder_map&&Object.keys(Ue.ams_extruder_map).length>0&&(On.current=Ue.ams_extruder_map)},[Ue?.ams_extruder_map]);const Ra=Ue?.ams_extruder_map&&Object.keys(Ue.ams_extruder_map).length>0?Ue.ams_extruder_map:On.current,$n=w.useRef([]);w.useEffect(()=>{Ue?.ams&&Ue.ams.length>0&&($n.current=Ue.ams)},[Ue?.ams]);const Br=Ue?.ams&&Ue.ams.length>0?Ue.ams:$n.current,Kr=w.useRef(void 0),ur=Ue?.tray_now;ur!==void 0&&ur!==255?Kr.current=ur:ur===255&&(Kr.current=void 0);const Hr=ur!==void 0&&ur!==255?ur:Kr.current,{data:or}=Qe({queryKey:["smartPlugByPrinter",t.id],queryFn:()=>oe.getSmartPlugByPrinter(t.id)}),{data:ki}=Qe({queryKey:["scriptPlugsByPrinter",t.id],queryFn:()=>oe.getScriptPlugsByPrinter(t.id)}),{data:Oi}=Qe({queryKey:["smartPlugStatus",or?.id],queryFn:()=>or?oe.getSmartPlugStatus(or.id):null,enabled:!!or,refetchInterval:1e4}),{data:yc}=Qe({queryKey:["queue",t.id,"pending"],queryFn:()=>oe.getQueue(t.id,"pending")}),yl=w.useMemo(()=>yc?.length?nee(yc,bt,Ot).length:0,[yc,bt,Ot]),{data:Pt}=Qe({queryKey:["queue",t.id,"printing"],queryFn:()=>oe.getQueue(t.id,"printing"),enabled:Ue?.state==="RUNNING"}),{data:Dn}=Qe({queryKey:["currentPrintUser",t.id],queryFn:()=>oe.getCurrentPrintUser(t.id),enabled:Ue?.state==="RUNNING"}),mr=Pt?.[0]?.created_by_username||Dn?.username,{data:Wt}=Qe({queryKey:["archives",t.id,"last"],queryFn:()=>oe.getArchives(t.id,1,0),enabled:Ue?.connected&&Ue?.state!=="RUNNING"}),Ms=Wt?.[0],vo=Ue?.state==="RUNNING"||Ue?.state==="PAUSE",td=g&&Ue?.awaiting_plate_clear===!0,vl=Ue?.connected&&td&&!vo,Lr=!g||!Ue?.connected?null:vo?{label:C("printers.plateStatus.inUse"),className:"bg-blue-500/20 text-blue-400"}:Ue.awaiting_plate_clear?{label:C("printers.plateStatus.notCleared"),className:"bg-yellow-500/20 text-yellow-400"}:{label:C("printers.plateStatus.cleared"),className:"bg-status-ok/20 text-status-ok"},nd=Lr?a.jsx("span",{className:`inline-flex flex-shrink-0 items-center rounded-full px-2 py-0.5 text-[10px] font-medium ${Lr.className}`,children:Lr.label}):null,$p=e&&Tr===!1,ls=ot({mutationFn:it=>oe.deletePrinter(t.id,it.deleteArchives),onSuccess:()=>{A.invalidateQueries({queryKey:["printers"]}),A.invalidateQueries({queryKey:["archives"]}),A.invalidateQueries({queryKey:["maintenanceOverview"]})},onError:it=>F(it.message||C("printers.toast.failedToDelete"),"error")}),$o=ot({mutationFn:()=>oe.connectPrinter(t.id),onSuccess:()=>{A.invalidateQueries({queryKey:["printerStatus",t.id]})}}),zi=ot({mutationFn:()=>oe.refreshPrinterStatus(t.id),onSuccess:()=>{A.invalidateQueries({queryKey:["printerStatus",t.id]}),F(C("printers.forceRefreshSuccess"),"success")},onError:it=>F(it.message||C("printers.toast.failedToSendCommand"),"error")}),wl=ot({mutationFn:it=>oe.unlinkSpool(it),onSuccess:it=>{F(C("spoolman.unlinkSuccess")||it?.message,"success"),A.invalidateQueries({queryKey:["linked-spools"]}),A.invalidateQueries({queryKey:["unlinked-spools"]})},onError:it=>{F(it.message||C("spoolman.unlinkFailed"),"error")}}),wo=ot({mutationFn:({amsId:it,temp:Dt,duration:Xt,filament:ct,rotateTray:Mn})=>oe.startDrying(t.id,it,Dt,Xt,ct,Mn),onSuccess:()=>{ze(null),A.invalidateQueries({queryKey:["printerStatus",t.id]})},onError:it=>F(it.message||C("printers.toast.failedToSendCommand"),"error")}),ha=ot({mutationFn:it=>oe.stopDrying(t.id,it),onSuccess:()=>{A.invalidateQueries({queryKey:["printerStatus",t.id]})},onError:it=>F(it.message||C("printers.toast.failedToSendCommand"),"error")}),vc=ot({mutationFn:it=>or?oe.controlSmartPlug(or.id,it):Promise.reject("No plug"),onSuccess:()=>{A.invalidateQueries({queryKey:["smartPlugStatus",or?.id]})}}),Im=ot({mutationFn:it=>or?oe.updateSmartPlug(or.id,{auto_off:it}):Promise.reject("No plug"),onSuccess:()=>{A.invalidateQueries({queryKey:["smartPlugByPrinter",t.id]}),A.invalidateQueries({queryKey:["smart-plugs"]})}}),ru=ot({mutationFn:({id:it,action:Dt})=>oe.controlSmartPlug(it,Dt),onSuccess:()=>{F(C("printers.toast.scriptTriggered"))},onError:it=>F(it.message||C("printers.toast.failedToRunScript"),"error")}),rd=ot({mutationFn:()=>oe.stopPrint(t.id),onSuccess:()=>{F(C("printers.toast.printStopped")),A.invalidateQueries({queryKey:["printerStatus",t.id]})},onError:it=>F(it.message||C("printers.toast.failedToStopPrint"),"error")}),Vp=ot({mutationFn:()=>oe.pausePrint(t.id),onSuccess:()=>{F(C("printers.toast.printPaused")),A.invalidateQueries({queryKey:["printerStatus",t.id]})},onError:it=>F(it.message||C("printers.toast.failedToPausePrint"),"error")}),ka=ot({mutationFn:()=>oe.resumePrint(t.id),onSuccess:()=>{F(C("printers.toast.printResumed")),A.invalidateQueries({queryKey:["printerStatus",t.id]})},onError:it=>F(it.message||C("printers.toast.failedToResumePrint"),"error")}),Es=ot({mutationFn:()=>oe.clearPlate(t.id),onSuccess:()=>{F(C("queue.clearPlateSuccess")),A.setQueryData(["printerStatus",t.id],it=>it&&{...it,awaiting_plate_clear:!1}),A.invalidateQueries({queryKey:["printerStatus",t.id]}),A.invalidateQueries({queryKey:["queue",t.id]})},onError:it=>F(it.message||C("printers.toast.failedToSendCommand"),"error")}),Vo=ot({mutationFn:it=>oe.setChamberLight(t.id,it),onMutate:async it=>{await A.cancelQueries({queryKey:["printerStatus",t.id]});const Dt=A.getQueryData(["printerStatus",t.id]);return A.setQueryData(["printerStatus",t.id],Xt=>({...Xt,chamber_light:it})),{previousStatus:Dt}},onSuccess:(it,Dt)=>{F(`Chamber light ${Dt?"on":"off"}`)},onError:(it,Dt,Xt)=>{Xt?.previousStatus&&A.setQueryData(["printerStatus",t.id],Xt.previousStatus),F(it.message||C("printers.toast.failedToControlChamberLight"),"error")}}),wc=ot({mutationFn:it=>oe.setPrintSpeed(t.id,it),onMutate:async it=>{await A.cancelQueries({queryKey:["printerStatus",t.id]});const Dt=A.getQueryData(["printerStatus",t.id]);return A.setQueryData(["printerStatus",t.id],Xt=>({...Xt,speed_level:it})),{previousStatus:Dt}},onError:(it,Dt,Xt)=>{Xt?.previousStatus&&A.setQueryData(["printerStatus",t.id],Xt.previousStatus),F(it.message||C("printers.toast.failedToSetSpeed"),"error")}}),Sl=ot({mutationFn:it=>oe.setAirductMode(t.id,it),onMutate:async it=>{await A.cancelQueries({queryKey:["printerStatus",t.id]});const Dt=A.getQueryData(["printerStatus",t.id]);return A.setQueryData(["printerStatus",t.id],Xt=>({...Xt,airduct_mode:it==="cooling"?0:1})),{previousStatus:Dt}},onError:(it,Dt,Xt)=>{Xt?.previousStatus&&A.setQueryData(["printerStatus",t.id],Xt.previousStatus),F(it.message||C("printers.toast.failedToSendCommand"),"error")}}),ad=ot({mutationFn:({distance:it,force:Dt})=>oe.bedJog(t.id,it,Dt??!1),onError:it=>F(it.message||C("printers.toast.failedToSendCommand"),"error")}),Gp=ot({mutationFn:it=>oe.homeAxes(t.id,it),onSuccess:()=>{try{sessionStorage.setItem(`bambuddy.bedJog.warned.${t.id}`,"1")}catch{}F(C("printers.bedJog.homingStarted"))},onError:it=>F(it.message||C("printers.toast.failedToSendCommand"),"error")}),_l=ot({mutationFn:it=>oe.updatePrinter(t.id,{plate_detection_enabled:it}),onSuccess:()=>{A.invalidateQueries({queryKey:["printers"]}),F(_l.variables?C("printers.toast.plateCheckEnabled"):C("printers.toast.plateCheckDisabled"))},onError:it=>F(it.message||C("printers.toast.failedToUpdateSetting"),"error")}),id=(Ue?.state==="RUNNING"||Ue?.state==="PAUSE")&&(Ue?.printable_objects_count??0)>=2,{data:Om}=Qe({queryKey:["printableObjects",t.id],queryFn:()=>oe.getPrintableObjects(t.id),enabled:L||id,refetchInterval:L?5e3:id?3e4:!1}),[sd,od]=w.useState(null),au=w.useRef(!1),ci=w.useRef(null),iu=w.useRef(!1),zm=ot({mutationFn:({amsId:it,slotId:Dt})=>oe.refreshAmsSlot(t.id,it,Dt),onMutate:({amsId:it,slotId:Dt})=>{ci.current&&clearTimeout(ci.current),au.current=!1,iu.current=!1,od({amsId:it,slotId:Dt}),setTimeout(()=>{iu.current=!0},2e3),ci.current=setTimeout(()=>{od(null)},3e4)},onSuccess:it=>{F(it.message||C("printers.toast.rfidRereadInitiated"))},onError:it=>{F(it.message||C("printers.toast.failedToRereadRfid"),"error"),ci.current&&clearTimeout(ci.current),od(null)}}),[Ys,su]=w.useState(null),[kl,Nl]=w.useState(null),ou=async()=>{try{const it=await oe.getPlateReferences(t.id);su(it)}catch{}},Um=()=>{_l.mutate(!t.plate_detection_enabled)},Zg=async()=>{Ye(!0),Ie(null);const it=Ue?.chamber_light===!1;Je(it),it&&(await oe.setChamberLight(t.id,!0),await new Promise(Dt=>setTimeout(Dt,2500)));try{const Dt=await oe.checkPlateEmpty(t.id,{includeDebugImage:!0});Ie(Dt),ou()}catch(Dt){F(Dt instanceof Error?Dt.message:C("printers.toast.failedToCheckPlate"),"error"),it&&(await oe.setChamberLight(t.id,!1),Je(!1))}finally{Ye(!1)}},hn=w.useCallback(async()=>{Ie(null),nt&&(await oe.setChamberLight(t.id,!1),Je(!1))},[nt,t.id]),Bm=async it=>{Le(!0);try{const Dt=await oe.calibratePlateDetection(t.id,{label:it});if(Dt.success){F(Dt.message||C("printers.toast.calibrationSaved"),"success"),ou();const Xt=await oe.checkPlateEmpty(t.id,{includeDebugImage:!0});Ie(Xt)}else F(Dt.message||C("printers.toast.calibrationFailed"),"error")}catch(Dt){F(Dt instanceof Error?Dt.message:C("printers.toast.calibrationFailed"),"error")}finally{Le(!1)}},Hm=async(it,Dt)=>{try{await oe.updatePlateReferenceLabel(t.id,it,Dt),Nl(null),ou()}catch(Xt){F(Xt instanceof Error?Xt.message:C("printers.toast.failedToUpdateLabel"),"error")}},eb=async it=>{try{await oe.deletePlateReference(t.id,it),F(C("printers.toast.referenceDeleted"),"success"),ou();const Dt=await oe.checkPlateEmpty(t.id,{includeDebugImage:!0});Ie(Dt)}catch(Dt){F(Dt instanceof Error?Dt.message:C("printers.toast.failedToDeleteReference"),"error")}},Wp=async()=>{if(dt){tt(!0);try{await oe.updatePrinter(t.id,{plate_detection_roi:dt}),F(C("printers.toast.detectionAreaSaved"),"success"),Ae(null);const it=await oe.checkPlateEmpty(t.id,{includeDebugImage:!0});Ie(it)}catch(it){F(it instanceof Error?it.message:C("printers.toast.failedToSaveDetectionArea"),"error")}finally{tt(!1)}}};w.useEffect(()=>{const it=Dt=>{Dt.key==="Escape"&&Tt&&hn()};return window.addEventListener("keydown",it),()=>window.removeEventListener("keydown",it)},[Tt,hn]);const Go=w.useRef(null);w.useEffect(()=>{if(!sd)return;const it=Ue?.ams_status_main??0;return it!==0&&(au.current=!0,Go.current&&(clearTimeout(Go.current),Go.current=null)),au.current&&it===0&&(iu.current?(ci.current&&clearTimeout(ci.current),od(null)):Go.current||(Go.current=setTimeout(()=>{ci.current&&clearTimeout(ci.current),od(null)},2e3))),()=>{Go.current&&clearTimeout(Go.current)}},[Ue?.ams_status_main,sd]);const[Wo,Sc]=w.useState(null);if($p)return null;const Xy=()=>{switch(i){case 1:return"w-10 h-10";case 2:return"w-14 h-14";case 3:return"w-16 h-16";case 4:return"w-20 h-20";default:return"w-14 h-14"}},qm=()=>{switch(i){case 1:return"text-base truncate";case 2:return"text-lg";case 3:return"text-xl";case 4:return"text-2xl";default:return"text-lg"}},Kp=()=>{switch(i){case 1:return"mb-2";case 2:return"mb-4";case 3:return"mb-5";case 4:return"mb-6";default:return"mb-4"}},$m=Tr&&Ue?.state!=="RUNNING"&&Ue?.state!=="PAUSE"&&k("printers:control"),_e=it=>{it.preventDefault(),Mt.current++,Mt.current===1&&He(!0)},Et=it=>{it.preventDefault(),it.dataTransfer.dropEffect=$m?"copy":"none"},Fn=it=>{it.preventDefault(),Mt.current--,Mt.current===0&&He(!1)},kn=async it=>{if(it.preventDefault(),Mt.current=0,He(!1),!$m)return;const Xt=Array.from(it.dataTransfer.files)[0];if(!Xt)return;const ct=Xt.name.toLowerCase();if(!ct.endsWith(".gcode")&&!ct.includes(".gcode.")){F(C("printers.dropNotPrintable","Only .gcode and .gcode.3mf files can be printed"),"error");return}ht(!0);try{const Mn=await oe.uploadLibraryFile(Xt,null),xr=Mn.metadata?.sliced_for_model,lr=B0(t.model);if(xr&&lr&&xr.toLowerCase()!==lr.toLowerCase()){await oe.deleteLibraryFile(Mn.id).catch(()=>{}),F(C("printers.incompatibleFile","This file was sliced for {{slicedFor}}, but this printer is a {{printerModel}}",{slicedFor:xr,printerModel:lr}),"error");return}Be({id:Mn.id,filename:Mn.filename})}catch{F(C("common.uploadFailed","Upload failed"),"error")}finally{ht(!1)}};return a.jsxs(wt,{className:`relative ${N?"ring-2 ring-bambu-green":""} ${S?"cursor-pointer":""}`,onDragEnter:_e,onDragOver:Et,onDragLeave:Fn,onDrop:kn,children:[S&&a.jsx("div",{className:"absolute inset-0 z-20 flex items-start p-2",onClick:it=>{it.stopPropagation(),P?.(t.id)},children:N?a.jsx(As,{className:"w-5 h-5 text-bambu-green"}):a.jsx(mo,{className:"w-5 h-5 text-bambu-gray"})}),(st||at)&&a.jsx("div",{className:`absolute inset-0 z-10 rounded-xl border-2 border-dashed flex items-center justify-center transition-colors ${at?"bg-bambu-green/10 border-bambu-green/50":$m?"bg-bambu-green/10 border-bambu-green":"bg-red-500/10 border-red-500/50"}`,children:a.jsx("div",{className:"text-center",children:at?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-8 h-8 mx-auto mb-2 text-bambu-green animate-spin"}),a.jsx("p",{className:"text-sm font-medium text-bambu-green",children:C("common.uploading","Uploading...")})]}):$m?a.jsxs(a.Fragment,{children:[a.jsx(Mr,{className:"w-8 h-8 mx-auto mb-2 text-bambu-green"}),a.jsx("p",{className:"text-sm font-medium text-bambu-green",children:C("printers.dropToPrint","Drop to print")})]}):a.jsxs(a.Fragment,{children:[a.jsx(Bt,{className:"w-8 h-8 mx-auto mb-2 text-red-400"}),a.jsx("p",{className:"text-sm font-medium text-red-400",children:C("printers.cannotPrint","Printer busy")})]})})}),a.jsxs(St,{className:i>=3?"p-5":"",children:[a.jsxs("div",{className:Kp(),children:[a.jsxs("div",{className:"flex items-start justify-between gap-2",children:[a.jsxs("div",{className:"flex items-center gap-3 min-w-0 flex-1",children:[a.jsx("img",{src:eee(t.model),alt:t.model||C("common.printer"),className:`object-contain rounded-lg bg-bambu-dark flex-shrink-0 ${Xy()}`}),a.jsxs("div",{className:"min-w-0 flex-1",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("h3",{className:`font-semibold text-white ${qm()}`,children:t.name}),r==="compact"&&(()=>{const it=Ue?.connected&&Ue.hms_errors?cm(Ue.hms_errors):[],Dt=it.some(xr=>xr.severity<=2),Xt=it.length>0,ct=Ue?.connected?Dt?"bg-status-error":Xt?"bg-status-warning":"bg-status-ok":"bg-status-error",Mn=Ue?.connected?Xt?`${it.length} HMS ${it.length===1?"error":"errors"}`:C("printers.connection.connected"):C("printers.connection.offline");return a.jsx("div",{className:`w-2 h-2 rounded-full flex-shrink-0 ${ct}`,title:Mn})})()]}),a.jsxs("p",{className:"text-sm text-bambu-gray",children:[t.model||"Unknown Model",r==="expanded"&&Ue?.nozzles&&Ue.nozzles[0]?.nozzle_diameter&&a.jsxs("span",{className:"ml-1.5 text-bambu-gray",title:Ue.nozzles[0].nozzle_type||"Nozzle",children:["• ",Ue.nozzles[0].nozzle_diameter,"mm"]}),r==="expanded"&&n&&n.total_print_hours>0&&a.jsxs("span",{className:"ml-2 text-bambu-gray",children:[a.jsx(Yn,{className:"w-3 h-3 inline-block mr-1"}),Math.round(n.total_print_hours),"h"]})]})]})]}),a.jsxs("div",{className:"relative flex-shrink-0",children:[a.jsx(De,{variant:"ghost",size:"sm",onClick:()=>$(!E),children:a.jsx(ip,{className:"w-4 h-4"})}),E&&a.jsxs("div",{className:"absolute right-0 mt-2 w-48 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg z-20",children:[a.jsxs("button",{className:`w-full px-4 py-2 text-left text-sm flex items-center gap-2 ${k("printers:update")?"hover:bg-bambu-dark-tertiary":"opacity-50 cursor-not-allowed"}`,onClick:()=>{k("printers:update")&&(J(!0),$(!1))},title:k("printers:update")?void 0:C("printers.permission.noEdit"),children:[a.jsx(li,{className:"w-4 h-4"}),C("common.edit")]}),a.jsxs("button",{className:"w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2",onClick:()=>{Te(!0),$(!1)},children:[a.jsx(Cs,{className:"w-4 h-4"}),C("printers.printerInformation")]}),a.jsxs("button",{className:"w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2",onClick:()=>{$o.mutate(),$(!1)},children:[a.jsx(sr,{className:"w-4 h-4"}),C("printers.reconnect")]}),a.jsxs("button",{className:"w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2 disabled:opacity-50",disabled:zi.isPending,onClick:()=>{zi.mutate(),$(!1)},children:[a.jsx(uw,{className:`w-4 h-4 ${zi.isPending?"animate-spin":""}`}),C("printers.forceRefresh")]}),a.jsxs("button",{className:"w-full px-4 py-2 text-left text-sm hover:bg-bambu-dark-tertiary flex items-center gap-2",onClick:()=>{K(!0),$(!1)},children:[a.jsx(gJ,{className:"w-4 h-4"}),C("printers.mqttDebug")]}),a.jsxs("button",{className:`w-full px-4 py-2 text-left text-sm flex items-center gap-2 ${k("printers:delete")?"text-red-400 hover:bg-bambu-dark-tertiary":"text-red-400/50 cursor-not-allowed"}`,onClick:()=>{k("printers:delete")&&(X(!0),$(!1))},title:k("printers:delete")?void 0:C("printers.permission.noDelete"),children:[a.jsx(Zt,{className:"w-4 h-4"}),C("common.delete")]})]})]})]}),r==="expanded"&&a.jsxs("div",{className:"flex flex-wrap items-center gap-2 mt-2",children:[a.jsxs("span",{className:`flex items-center gap-1.5 px-2 py-1 rounded-full text-xs ${Ue?.connected?"bg-status-ok/20 text-status-ok":"bg-status-error/20 text-status-error"}`,children:[Ue?.connected?a.jsx(Ty,{className:"w-3 h-3"}):a.jsx(Sp,{className:"w-3 h-3"}),Ue?.connected?C("printers.connection.connected"):C("printers.connection.offline")]}),Ue?.connected&&Ue?.wired_network&&a.jsxs("span",{className:"flex items-center gap-1 px-2 py-1 rounded-full text-xs bg-status-ok/20 text-status-ok",title:C("printers.connection.ethernet","Ethernet"),children:[a.jsx(KI,{className:"w-3 h-3"}),C("printers.connection.ethernet","Ethernet")]}),Ue?.connected&&!Ue?.wired_network&&xn!=null&&a.jsxs("span",{className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs ${xn>=-50||xn>=-60?"bg-status-ok/20 text-status-ok":xn>=-70?"bg-status-warning/20 text-status-warning":xn>=-80?"bg-orange-500/20 text-orange-600":"bg-status-error/20 text-status-error"}`,title:`WiFi: ${xn} dBm - ${C(tee(xn).labelKey)}`,children:[a.jsx(hJ,{className:"w-3 h-3"}),xn,"dBm"]}),Ue?.connected&&(()=>{const it=Ue.hms_errors?cm(Ue.hms_errors):[];return a.jsxs("button",{onClick:()=>Y(!0),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs cursor-pointer hover:opacity-80 transition-opacity ${it.length>0?it.some(Dt=>Dt.severity<=2)?"bg-status-error/20 text-status-error":"bg-status-warning/20 text-status-warning":"bg-status-ok/20 text-status-ok"}`,title:C("printers.clickToViewHmsErrors"),children:[a.jsx(Cn,{className:"w-3 h-3"}),it.length>0?it.length:"OK"]})})(),n&&a.jsxs("button",{onClick:()=>T("/maintenance"),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs cursor-pointer hover:opacity-80 transition-opacity ${n.due_count>0?"bg-status-error/20 text-status-error":n.warning_count>0?"bg-status-warning/20 text-status-warning":"bg-status-ok/20 text-status-ok"}`,title:n.due_count>0||n.warning_count>0?`${n.due_count>0?`${n.due_count} maintenance due`:""}${n.due_count>0&&n.warning_count>0?", ":""}${n.warning_count>0?`${n.warning_count} due soon`:""} - Click to view`:C("printers.maintenanceUpToDate"),children:[a.jsx(xg,{className:"w-3 h-3"}),n.due_count>0||n.warning_count>0?n.due_count+n.warning_count:"OK"]}),yl>0&&a.jsxs("button",{onClick:()=>T("/queue"),className:"flex items-center gap-1 px-2 py-1 rounded-full text-xs bg-indigo-500/20 text-indigo-400 hover:opacity-80 transition-opacity",title:C("printers.queue.inQueue",{count:yl}),children:[a.jsx(ia,{className:"w-3 h-3"}),yl]}),v&&rt?.current_version&&rt?.latest_version?a.jsxs("button",{onClick:()=>zt(!0),className:`flex items-center gap-1 px-2 py-1 rounded-full text-xs hover:opacity-80 transition-opacity ${rt.update_available?"bg-orange-500/20 text-orange-400":"bg-status-ok/20 text-status-ok"}`,title:rt.update_available?C("printers.firmwareUpdateAvailable",{current:rt.current_version,latest:rt.latest_version}):C("printers.firmwareUpToDate",{version:rt.current_version}),children:[rt.update_available?a.jsx(aa,{className:"w-3 h-3"}):a.jsx(wr,{className:"w-3 h-3"}),rt.current_version]}):Ue?.firmware_version?a.jsx("span",{className:"flex items-center gap-1 px-2 py-1 rounded-full text-xs bg-bambu-dark-tertiary/50 text-bambu-gray",children:Ue.firmware_version}):null,Ue?.connected&&["X1C","X1","X1E","X2D","P1S","P1P","P2S","H2D","H2D Pro","H2C","H2S"].includes(t.model??"")&&a.jsx("span",{className:`flex items-center px-2 py-1 rounded-full text-xs ${Ue.door_open?"bg-yellow-500/20 text-yellow-400":"bg-status-ok/20 text-status-ok"}`,title:Ue.door_open?C("printers.door.open"):C("printers.door.closed"),children:Ue.door_open?a.jsx(bge,{className:"w-3 h-3"}):a.jsx(fge,{className:"w-3 h-3"})})]})]}),z&&a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50",children:a.jsx(wt,{className:"w-full max-w-md mx-4",children:a.jsxs(St,{children:[a.jsxs("div",{className:"flex items-start gap-3 mb-4",children:[a.jsx("div",{className:"p-2 rounded-full bg-red-500/20",children:a.jsx(Cn,{className:"w-5 h-5 text-red-400"})}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-lg font-semibold text-white",children:C("printers.confirm.deleteTitle")}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:C("printers.confirm.deleteMessage",{name:t.name})})]})]}),a.jsx("div",{className:"bg-bambu-dark rounded-lg p-3 mb-4",children:a.jsxs("label",{className:"flex items-start gap-3 cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:R,onChange:it=>ne(it.target.checked),className:"mt-0.5 w-4 h-4 rounded border-bambu-gray bg-bambu-dark-secondary text-bambu-green focus:ring-bambu-green focus:ring-offset-0"}),a.jsxs("div",{children:[a.jsx("span",{className:"text-sm text-white",children:C("printers.deleteArchives")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-0.5",children:C(R?"printers.confirm.deleteArchivesNote":"printers.confirm.keepArchivesNote")})]})]})}),a.jsxs("div",{className:"flex justify-end gap-2",children:[a.jsx(De,{variant:"secondary",onClick:()=>{X(!1),ne(!0)},children:C("common.cancel")}),a.jsx(De,{variant:"danger",onClick:()=>{ls.mutate({deleteArchives:R}),X(!1),ne(!0)},children:"Delete"})]})]})})}),Ue?.connected&&a.jsxs(a.Fragment,{children:[r==="compact"?a.jsx("div",{className:"mt-2",children:Ue.state==="RUNNING"||Ue.state==="PAUSE"?a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("div",{className:"flex-1 bg-bambu-dark-tertiary rounded-full h-1.5",children:a.jsx("div",{className:`${Ue.state==="PAUSE"?"bg-status-warning":"bg-bambu-green"} h-1.5 rounded-full transition-all`,style:{width:`${Ue.progress||0}%`}})}),a.jsxs("div",{className:"flex flex-shrink-0 items-center gap-1.5",children:[a.jsxs("span",{className:"text-xs text-white",children:[Math.round(Ue.progress||0),"%"]}),nd]})]}):a.jsxs("div",{className:"flex items-center justify-between gap-2",children:[a.jsxs("div",{className:"min-w-0 flex-1 flex items-center gap-1.5",children:[a.jsx("p",{className:"min-w-0 truncate text-xs text-bambu-gray",children:KD(Ue.state,Ue.stg_cur_name)}),nd]}),vl&&a.jsx("button",{type:"button",onClick:()=>Es.mutate(),disabled:Es.isPending||!k("printers:clear_plate"),"aria-label":C("printers.plateStatus.markCleared"),className:"inline-flex h-5 w-5 flex-shrink-0 items-center justify-center rounded-full bg-yellow-500/20 border border-yellow-400/40 text-yellow-400 hover:bg-yellow-500/30 transition-colors disabled:opacity-50",title:k("printers:clear_plate")?C("printers.plateStatus.markCleared"):C("printers.permission.noControl"),children:Es.isPending?a.jsx(mt,{className:"w-3 h-3 animate-spin"}):a.jsx(yK,{className:"w-3 h-3"})})]})}):a.jsxs(a.Fragment,{children:[a.jsxs("div",{className:"mb-4 p-3 bg-bambu-dark rounded-lg relative",children:[a.jsxs("button",{onClick:()=>ee(!0),disabled:!(Ue.state==="RUNNING"||Ue.state==="PAUSE")||(Ue.printable_objects_count??0)<2||!k("printers:control"),className:`absolute top-2 right-2 p-1.5 rounded transition-colors z-10 ${(Ue.state==="RUNNING"||Ue.state==="PAUSE")&&(Ue.printable_objects_count??0)>=2&&k("printers:control")?"text-bambu-gray hover:text-white hover:bg-white/10":"text-bambu-gray/30 cursor-not-allowed"}`,title:k("printers:control")?Ue.state==="RUNNING"||Ue.state==="PAUSE"?(Ue.printable_objects_count??0)>=2?C("printers.skipObjects.tooltip"):C("printers.skipObjects.requiresMultiple"):C("printers.skipObjects.onlyWhilePrinting"):C("printers.permission.noControl"),children:[a.jsx(pT,{className:"w-4 h-4"}),Om&&Om.skipped_count>0&&a.jsx("span",{className:"absolute -top-1 -right-1 min-w-[16px] h-4 px-1 flex items-center justify-center text-[10px] font-bold bg-red-500 text-white rounded-full",children:Om.skipped_count})]}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(dGe,{url:Ue.state==="RUNNING"||Ue.state==="PAUSE"?Ue.cover_url:null,printName:(Ue.state==="RUNNING"||Ue.state==="PAUSE")&&i6(Ue.subtask_name||Ue.current_print||null,Ue.gcode_file,C,Yt)||void 0}),a.jsx("div",{className:"flex-1 min-w-0",children:Ue.current_print&&(Ue.state==="RUNNING"||Ue.state==="PAUSE")?a.jsxs(a.Fragment,{children:[a.jsxs("div",{className:"mb-1 flex items-center gap-2",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:KD(Ue.state,Ue.stg_cur_name)}),nd]}),a.jsx("p",{className:"text-white text-sm mb-2 truncate",children:i6(Ue.subtask_name||Ue.current_print||null,Ue.gcode_file,C,Yt)}),a.jsxs("div",{className:"flex items-center justify-between text-sm",children:[a.jsx("div",{className:"flex-1 bg-bambu-dark-tertiary rounded-full h-2 mr-3",children:a.jsx("div",{className:`${Ue.state==="PAUSE"?"bg-status-warning":"bg-bambu-green"} h-2 rounded-full transition-all`,style:{width:`${Ue.progress||0}%`}})}),a.jsxs("span",{className:"text-white",children:[Math.round(Ue.progress||0),"%"]})]}),a.jsxs("div",{className:"flex items-center gap-3 mt-2 text-xs text-bambu-gray",children:[Ue.remaining_time!=null&&Ue.remaining_time>0&&a.jsxs(a.Fragment,{children:[a.jsxs("span",{className:"flex items-center gap-1",children:[a.jsx(Yn,{className:"w-3 h-3"}),Qi(Ue.remaining_time*60)]}),a.jsxs("span",{className:"text-bambu-green font-medium",title:C("printers.estimatedCompletion"),children:["ETA ",oO(Ue.remaining_time,p,C)]})]}),Ue.layer_num!=null&&Ue.total_layers!=null&&Ue.total_layers>0&&a.jsxs("span",{className:"flex items-center gap-1",children:[a.jsx(ia,{className:"w-3 h-3"}),Ue.layer_num,"/",Ue.total_layers]}),mr&&a.jsxs("span",{className:"flex items-center gap-1",title:`Started by ${mr}`,children:[a.jsx(vm,{className:"w-3 h-3"}),mr]})]})]}):a.jsxs(a.Fragment,{children:[a.jsx("p",{className:"text-sm text-bambu-gray mb-1",children:C("printers.sort.status")}),a.jsxs("div",{className:"mb-2 flex items-center gap-2",children:[a.jsx("p",{className:"text-white text-sm",children:KD(Ue.state,Ue.stg_cur_name)}),nd]}),a.jsxs("div",{className:"flex items-center justify-between text-sm",children:[a.jsx("div",{className:"flex-1 bg-bambu-dark-tertiary rounded-full h-2 mr-3",children:a.jsx("div",{className:"bg-bambu-dark-tertiary h-2 rounded-full"})}),a.jsx("span",{className:"text-bambu-gray",children:"—"})]}),Ms?a.jsxs("p",{className:"text-xs text-bambu-gray mt-2 truncate",title:Ms.print_name||Ms.filename,children:["Last: ",Ms.print_name||Ms.filename,Ms.completed_at&&a.jsxs("span",{className:"ml-1 text-bambu-gray/60",children:["• ",yg(Ms.completed_at,{month:"short",day:"numeric"})]})]}):a.jsx("p",{className:"text-xs text-bambu-gray mt-2",children:C("printers.readyToPrint")})]})})]})]}),a.jsx(kEe,{printerId:t.id,printerModel:t.model,loadedFilamentTypes:bt,loadedFilaments:Ot})]}),Ue.temperatures&&r==="expanded"&&(()=>{const it=Ue.temperatures.nozzle_heating||Ue.temperatures.nozzle_2_heating||!1,Dt=Ue.temperatures.bed_heating||!1,Xt=Ue.temperatures.chamber_heating||!1,ct=t.nozzle_count===2||Ue.temperatures.nozzle_2!==void 0,Mn=Ue.active_extruder===1?"L":"R",xr=Ue.nozzle_rack?.find(La=>La.id===1),lr=Ue.nozzle_rack?.find(La=>La.id===0),Or=lr||xr;return a.jsxs("div",{className:"flex items-stretch gap-1.5 flex-wrap",children:[a.jsxs("div",{className:"text-center px-2 py-1.5 bg-bambu-dark rounded-lg flex-1 flex flex-col justify-center items-center",children:[a.jsx(GD,{className:"w-3.5 h-3.5 mb-0.5",color:"text-orange-400",isHeating:it}),Ue.temperatures.nozzle_2!==void 0?a.jsxs(a.Fragment,{children:[a.jsx("p",{className:"text-[9px] text-bambu-gray",children:"L / R"}),a.jsxs("p",{className:"text-[11px] text-white",children:[Math.round(Ue.temperatures.nozzle||0),"° / ",Math.round(Ue.temperatures.nozzle_2||0),"°"]})]}):Or?a.jsx(Cie,{slot:Or,index:0,activeStatus:!0,filamentName:Or.filament_id?Lt?.[Or.filament_id]?.name:void 0,children:a.jsxs("div",{className:"cursor-default",children:[a.jsx("p",{className:"text-[9px] text-bambu-gray",children:C("printers.temperatures.nozzle")}),a.jsxs("p",{className:"text-[11px] text-white",children:[Math.round(Ue.temperatures.nozzle||0),"°C"]})]})}):a.jsxs(a.Fragment,{children:[a.jsx("p",{className:"text-[9px] text-bambu-gray",children:C("printers.temperatures.nozzle")}),a.jsxs("p",{className:"text-[11px] text-white",children:[Math.round(Ue.temperatures.nozzle||0),"°C"]})]})]}),a.jsxs("div",{className:"text-center px-2 py-1.5 bg-bambu-dark rounded-lg flex-1 flex flex-col justify-center items-center",children:[a.jsx(GD,{className:"w-3.5 h-3.5 mb-0.5",color:"text-blue-400",isHeating:Dt}),a.jsx("p",{className:"text-[9px] text-bambu-gray",children:C("printers.temperatures.bed")}),a.jsxs("p",{className:"text-[11px] text-white",children:[Math.round(Ue.temperatures.bed||0),"°C"]})]}),Ue.temperatures.chamber!==void 0&&a.jsxs("div",{className:"text-center px-2 py-1.5 bg-bambu-dark rounded-lg flex-1 flex flex-col justify-center items-center",children:[a.jsx(GD,{className:"w-3.5 h-3.5 mb-0.5",color:"text-green-400",isHeating:Xt}),a.jsx("p",{className:"text-[9px] text-bambu-gray",children:C("printers.temperatures.chamber")}),a.jsxs("p",{className:"text-[11px] text-white",children:[Math.round(Ue.temperatures.chamber||0),"°C"]})]}),ct&&a.jsx(nGe,{leftSlot:xr,rightSlot:lr,activeNozzle:Mn,filamentInfo:Lt,children:a.jsxs("div",{className:"text-center px-3 py-1.5 bg-bambu-dark rounded-lg h-full flex flex-col justify-center items-center cursor-default",title:C("printers.activeNozzle",{nozzle:C(Mn==="L"?"common.left":"common.right")}),children:[a.jsx(cGe,{className:"w-3.5 h-3.5 mb-0.5 text-amber-400"}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsxs("span",{className:`text-[11px] font-bold ${Mn==="L"?"text-amber-400":"text-gray-500"}`,children:["L",xr?.nozzle_diameter?` ${xr.nozzle_diameter}`:""]}),a.jsx("span",{className:"text-[9px] text-bambu-gray/40",children:"·"}),a.jsxs("span",{className:`text-[11px] font-bold ${Mn==="R"?"text-amber-400":"text-gray-500"}`,children:["R",lr?.nozzle_diameter?` ${lr.nozzle_diameter}`:""]})]}),a.jsx("p",{className:"text-[9px] text-bambu-gray",children:C("printers.temperatures.nozzle")})]})}),Ue.nozzle_rack&&Ue.nozzle_rack.some(La=>La.id>=2)&&a.jsx(rGe,{slots:Ue.nozzle_rack,filamentInfo:Lt})]})})(),r==="expanded"&&vl&&a.jsxs("button",{type:"button",onClick:()=>Es.mutate(),disabled:Es.isPending||!k("printers:clear_plate"),className:"mt-2 w-full inline-flex items-center justify-center gap-2 px-3 py-1.5 rounded-lg bg-yellow-500/20 border border-yellow-400/40 text-yellow-400 hover:bg-yellow-500/30 transition-colors text-xs font-medium disabled:opacity-50",title:k("printers:clear_plate")?C("printers.plateStatus.markCleared"):C("printers.permission.noControl"),children:[Es.isPending?a.jsx(mt,{className:"w-3 h-3 animate-spin"}):a.jsx(yK,{className:"w-4 h-4"}),C("printers.plateStatus.markCleared")]}),r==="expanded"&&(()=>{const it=Ue.state==="RUNNING",Dt=Ue.state==="PAUSE",Xt=it||Dt,ct=rd.isPending||Vp.isPending||ka.isPending,Mn=Ue.cooling_fan_speed,xr=Ue.big_fan1_speed,lr=Ue.big_fan2_speed;return a.jsxs("div",{className:"mt-3",children:[a.jsxs("div",{className:"flex items-center gap-2 mb-2",children:[a.jsx("span",{className:"text-[10px] uppercase tracking-wider text-bambu-gray font-medium",children:C("printers.controls")}),a.jsx("div",{className:"flex-1 h-px bg-bambu-dark-tertiary/30"})]}),a.jsxs("div",{className:"flex flex-wrap items-start justify-between gap-x-2 gap-y-2",children:[a.jsxs("div",{className:"flex flex-wrap items-center gap-x-2 gap-y-1.5 min-w-0",children:[a.jsxs("div",{className:`flex items-center gap-1 px-1.5 py-1 rounded ${Mn&&Mn>0?"bg-cyan-500/10":"bg-bambu-dark"}`,title:C("printers.fans.partCooling"),children:[a.jsx(aJ,{className:`w-3.5 h-3.5 ${Mn&&Mn>0?"text-cyan-400":"text-bambu-gray/50"}`}),a.jsxs("span",{className:`text-[10px] ${Mn&&Mn>0?"text-cyan-400":"text-bambu-gray/50"}`,children:[Mn??0,"%"]})]}),a.jsxs("div",{className:`flex items-center gap-1 px-1.5 py-1 rounded ${xr&&xr>0?"bg-blue-500/10":"bg-bambu-dark"}`,title:C("printers.fans.auxiliary"),children:[a.jsx(yJ,{className:`w-3.5 h-3.5 ${xr&&xr>0?"text-blue-400":"text-bambu-gray/50"}`}),a.jsxs("span",{className:`text-[10px] ${xr&&xr>0?"text-blue-400":"text-bambu-gray/50"}`,children:[xr??0,"%"]})]}),a.jsxs("div",{className:`flex items-center gap-1 px-1.5 py-1 rounded ${lr&&lr>0?"bg-green-500/10":"bg-bambu-dark"}`,title:C("printers.fans.chamber"),children:[a.jsx(Bpe,{className:`w-3.5 h-3.5 ${lr&&lr>0?"text-green-400":"text-bambu-gray/50"}`}),a.jsxs("span",{className:`text-[10px] ${lr&&lr>0?"text-green-400":"text-bambu-gray/50"}`,children:[lr??0,"%"]})]}),a.jsx("div",{className:"w-px h-5 bg-bambu-gray/30"}),["P2S","X2D","H2D","H2C","H2S"].includes(t.model??"")&&(()=>{const Or=Ue.airduct_mode===1,La=Or?qu:KH,un=Or?"text-orange-400":"text-sky-400",Rn=Or?"bg-orange-500/10 hover:bg-orange-500/20":"bg-sky-500/10 hover:bg-sky-500/20";return a.jsxs("div",{className:"relative",children:[a.jsxs("button",{onClick:()=>G(I===t.id?null:t.id),disabled:!k("printers:control"),className:`flex items-center gap-1 px-1.5 py-1 rounded transition-colors ${Rn} disabled:opacity-50 disabled:cursor-not-allowed`,title:C("printers.airduct.title"),children:[a.jsx(La,{className:`w-3.5 h-3.5 ${un}`}),a.jsx("span",{className:`text-[10px] ${un}`,children:C(Or?"printers.airduct.heating":"printers.airduct.cooling")})]}),I===t.id&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-40",onClick:()=>G(null)}),a.jsx("div",{className:"absolute bottom-full left-0 mb-1 z-50 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg py-1 min-w-[130px]",children:[{mode:"cooling",label:C("printers.airduct.cooling"),modeId:0},{mode:"heating",label:C("printers.airduct.heating"),modeId:1}].map(({mode:Na,label:ni,modeId:di})=>a.jsxs("button",{onClick:()=>{Sl.mutate(Na),G(null)},className:`w-full text-left px-3 py-1.5 text-xs transition-colors flex items-center gap-2 ${Ue.airduct_mode===di?"text-bambu-green bg-bambu-green/10":"text-white hover:bg-bambu-dark-tertiary"}`,children:[Na==="heating"?a.jsx(qu,{className:"w-3 h-3"}):a.jsx(KH,{className:"w-3 h-3"}),ni]},Na))})]})]})})(),(()=>{const La={1:"50%",2:"100%",3:"124%",4:"166%"}[Ue.speed_level]||"100%";return a.jsxs("div",{className:"relative",children:[a.jsxs("button",{onClick:()=>ce(O===t.id?null:t.id),disabled:!Xt||!k("printers:control"),className:`flex items-center gap-1 px-1.5 py-1 rounded transition-colors ${Xt?"bg-amber-500/10 hover:bg-amber-500/20":"bg-bambu-dark cursor-not-allowed"}`,title:Xt?C("printers.speed.title"):void 0,children:[a.jsx(aS,{className:`w-3.5 h-3.5 ${Xt?"text-amber-400":"text-bambu-gray/50"}`}),a.jsx("span",{className:`text-[10px] ${Xt?"text-amber-400":"text-bambu-gray/50"}`,children:La})]}),O===t.id&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-40",onClick:()=>ce(null)}),a.jsx("div",{className:"absolute bottom-full left-0 mb-1 z-50 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg py-1 min-w-[130px]",children:[{mode:1,label:C("printers.speed.silent")},{mode:2,label:C("printers.speed.standard")},{mode:3,label:C("printers.speed.sport")},{mode:4,label:C("printers.speed.ludicrous")}].map(({mode:un,label:Rn})=>a.jsx("button",{onClick:()=>{wc.mutate(un),ce(null)},className:`w-full text-left px-3 py-1.5 text-xs transition-colors ${Ue.speed_level===un?"text-bambu-green bg-bambu-green/10":"text-white hover:bg-bambu-dark-tertiary"}`,children:Rn},un))})]})]})})(),a.jsx("div",{className:"w-px h-5 bg-bambu-gray/30"}),(()=>{const Or=k("printers:control"),La=Xt||!Or,un=Rn=>{const Na=Rn*te*1,ni=`bambuddy.bedJog.warned.${t.id}`,di=(()=>{try{return sessionStorage.getItem(ni)==="1"}catch{return!1}})();W(null),di?ad.mutate({distance:Na,force:!0}):he({distance:Na})};return a.jsxs("div",{className:"relative",children:[a.jsxs("button",{onClick:()=>W(q===t.id?null:t.id),disabled:La,className:`flex items-center gap-1 px-1.5 py-1 rounded transition-colors ${La?"bg-bambu-dark cursor-not-allowed":"bg-indigo-500/10 hover:bg-indigo-500/20"}`,title:C(Or?Xt?"printers.bedJog.disabledWhilePrinting":"printers.bedJog.title":"printers.permission.noControl"),children:[a.jsx(rxe,{className:`w-3.5 h-3.5 ${La?"text-bambu-gray/50":"text-indigo-400"}`}),a.jsx("span",{className:`text-[10px] ${La?"text-bambu-gray/50":"text-indigo-400"}`,children:C("printers.bedJog.bed")}),a.jsxs("span",{className:`text-[10px] tabular-nums opacity-70 ${La?"text-bambu-gray/50":"text-indigo-400"}`,children:[te,"mm"]})]}),q===t.id&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-40",onClick:()=>W(null)}),a.jsxs("div",{className:"absolute bottom-full left-0 mb-1 z-50 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-lg p-2 min-w-[140px]",children:[a.jsxs("div",{className:"flex items-center justify-between gap-1 mb-2",children:[a.jsx("button",{onClick:()=>un(-1),className:"flex-1 flex items-center justify-center py-1.5 rounded bg-indigo-500/15 hover:bg-indigo-500/30 text-indigo-300","aria-label":C("printers.bedJog.up"),children:a.jsx(wp,{className:"w-4 h-4"})}),a.jsx("button",{onClick:()=>un(1),className:"flex-1 flex items-center justify-center py-1.5 rounded bg-indigo-500/15 hover:bg-indigo-500/30 text-indigo-300","aria-label":C("printers.bedJog.down"),children:a.jsx(pg,{className:"w-4 h-4"})})]}),a.jsx("div",{className:"text-[9px] uppercase tracking-wider text-bambu-gray/70 px-1 mb-1",children:C("printers.bedJog.step")}),a.jsx("div",{className:"flex gap-1",children:[1,10,50].map(Rn=>a.jsx("button",{onClick:()=>le(Rn),className:`flex-1 px-1 py-1 rounded text-[10px] transition-colors ${te===Rn?"bg-bambu-green/20 text-bambu-green":"bg-bambu-dark text-bambu-gray hover:bg-bambu-dark-tertiary"}`,children:Rn},Rn))})]})]})]})})()]}),a.jsxs("div",{className:"flex items-center gap-2 flex-shrink-0 max-[550px]:self-start",children:[a.jsxs("button",{onClick:()=>M(!0),disabled:!Xt||ct||!k("printers:control"),className:`
                           flex items-center justify-center gap-1 px-3 py-1.5 rounded-lg text-xs font-medium
                           transition-colors
                           ${Xt&&k("printers:control")?"bg-red-500/20 text-red-400 hover:bg-red-500/30":"bg-bambu-dark text-bambu-gray/50 cursor-not-allowed"}
@@ -8709,7 +8709,7 @@ Accuracy: ${t.time_accuracy.toFixed(0)}%`:t.actual_time_seconds?`Actual: ${Qi(t.
   "CN=PrintFarm_Admins,OU=Groups,DC=example,DC=com": "Administrators",
   "CN=PrintFarm_Users,OU=Groups,DC=example,DC=com": "Operators"
 }`,value:i.ldap_group_mapping,onChange:g=>s({...i,ldap_group_mapping:g.target.value})}),a.jsxs("p",{className:"text-xs text-bambu-gray mt-1",children:[t("settings.ldap.groupMappingHint")||"Map LDAP group DNs to BamBuddy groups. Available groups: ",d.map(g=>g.name).join(", ")]})]})]})}),a.jsxs("div",{className:"flex gap-3 pt-2",children:[a.jsxs(De,{onClick:f,disabled:u.isPending,children:[u.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(wr,{className:"w-4 h-4"}),t("common.save")||"Save"]}),a.jsxs(De,{variant:"secondary",onClick:()=>p.mutate(),disabled:p.isPending,children:[p.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(uS,{className:"w-4 h-4"}),t("settings.ldap.testConnection")||"Test Connection"]})]})]})})]})]})}function gN({value:t,onChange:e,placeholder:n,maxLength:r=6}){return a.jsx("input",{type:"text",value:t,onChange:i=>e(i.target.value.toUpperCase().replace(/\s/g,"")),maxLength:r,className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors font-mono tracking-widest text-center",placeholder:n,autoComplete:"one-time-code"})}function oce({codes:t,onDone:e}){const{t:n}=_t(),[r,i]=w.useState(!1),s=()=>{navigator.clipboard.writeText(t.join(`
-`)),i(!0),setTimeout(()=>i(!1),2e3)};return a.jsxs("div",{className:"space-y-4",children:[a.jsx("div",{className:"bg-amber-500/10 border border-amber-500/30 rounded-lg p-4",children:a.jsx("p",{className:"text-amber-400 text-sm font-medium",children:n("settings.twoFa.backupCodesWarning")})}),a.jsx("div",{className:"grid grid-cols-2 gap-2",children:t.map((o,l)=>a.jsx("code",{className:"bg-bambu-dark-secondary rounded px-3 py-2 text-center font-mono text-sm text-white tracking-widest",children:o},l))}),a.jsxs("div",{className:"flex gap-3",children:[a.jsxs(De,{variant:"secondary",size:"sm",onClick:s,className:"flex items-center gap-2",children:[a.jsx(ns,{className:"w-4 h-4"}),n(r?"common.copied":"common.copy")]}),a.jsx(De,{variant:"primary",size:"sm",onClick:e,className:"flex-1",children:n("settings.twoFa.savedCodes")})]})]})}function vrt({onDone:t}){const{t:e}=_t(),n=tn(),{showToast:r}=rn(),[i,s]=w.useState("qr"),[o,l]=w.useState(""),[c,d]=w.useState([]),[u,m]=w.useState(!1),{data:p,isLoading:f}=Qe({queryKey:["totp-setup"],queryFn:()=>oe.setupTOTP(),staleTime:1/0}),x=ot({mutationFn:v=>oe.enableTOTP(v),onSuccess:v=>{d(v.backup_codes),s("backup"),n.invalidateQueries({queryKey:["2fa-status"]})},onError:()=>r(e("settings.twoFa.invalidCode"),"error")});return f||!p?a.jsx("div",{className:"flex items-center justify-center py-8",children:a.jsx(sr,{className:"w-6 h-6 animate-spin text-bambu-green"})}):i==="qr"?a.jsxs("div",{className:"space-y-4",children:[a.jsx("p",{className:"text-bambu-gray-light text-sm",children:e("settings.twoFa.setupInstructions")}),a.jsx("div",{className:"flex justify-center",children:a.jsx("img",{src:`data:image/png;base64,${p.qr_code_b64}`,alt:"TOTP QR Code",className:"w-48 h-48 rounded-lg"})}),a.jsxs("div",{children:[a.jsx("p",{className:"text-xs text-bambu-gray mb-1",children:e("settings.twoFa.manualEntry")}),a.jsxs("div",{className:"flex items-center gap-2 bg-bambu-dark-secondary rounded-lg px-3 py-2",children:[a.jsx("code",{className:"text-white text-xs font-mono flex-1 break-all",children:u?p.secret:"••••••••••••••••"}),a.jsx("button",{onClick:()=>m(!u),className:"text-bambu-gray hover:text-white",children:u?a.jsx($g,{className:"w-4 h-4"}):a.jsx(pl,{className:"w-4 h-4"})}),a.jsx("button",{onClick:()=>{navigator.clipboard.writeText(p.secret)},className:"text-bambu-gray hover:text-white",children:a.jsx(ns,{className:"w-4 h-4"})})]})]}),a.jsx(De,{variant:"primary",className:"w-full",onClick:()=>s("confirm"),children:e("settings.twoFa.scannedContinue")})]}):i==="confirm"?a.jsxs("div",{className:"space-y-4",children:[a.jsx("p",{className:"text-bambu-gray-light text-sm",children:e("settings.twoFa.enterCodeToConfirm")}),a.jsx(gN,{value:o,onChange:l,placeholder:"000000"}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>s("qr"),className:"flex-1",children:e("common.back")}),a.jsx(De,{variant:"primary",className:"flex-1",disabled:o.length!==6||x.isPending,onClick:()=>x.mutate(o),children:x.isPending?e("common.saving"):e("settings.twoFa.activate")})]})]}):a.jsxs("div",{className:"space-y-4",children:[a.jsx("h3",{className:"text-white font-medium",children:e("settings.twoFa.backupCodesTitle")}),a.jsx(oce,{codes:c,onDone:t})]})}function wrt(){const{t}=_t(),e=tn(),{showToast:n}=rn(),{user:r}=gr(),[i,s]=w.useState(!1),[o,l]=w.useState(!1),[c,d]=w.useState(!1),[u,m]=w.useState(""),[p,f]=w.useState(""),[x,v]=w.useState(null),[b,g]=w.useState(null),[S,N]=w.useState(""),[P,C]=w.useState(!1),[A,T]=w.useState(""),[F,k]=w.useState(!1),{data:E,isLoading:$}=Qe({queryKey:["2fa-status"],queryFn:()=>oe.get2FAStatus()}),{data:z}=Qe({queryKey:["oidc-links"],queryFn:()=>oe.getOIDCLinks()}),X=ot({mutationFn:()=>oe.enableEmailOTP(),onSuccess:se=>{g(se.setup_token),n(se.message,"success")},onError:se=>{const K=se.message??"";K.toLowerCase().includes("smtp")?n(t("settings.twoFa.smtpRequired"),"error"):n(K,"error")}}),R=ot({mutationFn:()=>oe.confirmEnableEmailOTP(b,S),onSuccess:()=>{e.invalidateQueries({queryKey:["2fa-status"]}),g(null),N(""),n(t("settings.twoFa.emailOtpEnabled"),"success")},onError:se=>n(se.message,"error")}),ne=ot({mutationFn:se=>oe.disableEmailOTP(se),onSuccess:()=>{e.invalidateQueries({queryKey:["2fa-status"]}),C(!1),T(""),n(t("settings.twoFa.emailOtpDisabled"),"success")},onError:se=>n(se.message,"error")}),re=ot({mutationFn:se=>oe.disableTOTP(se),onSuccess:()=>{e.invalidateQueries({queryKey:["2fa-status"]}),l(!1),m(""),n(t("settings.twoFa.totpDisabled"),"success")},onError:()=>n(t("settings.twoFa.invalidCode"),"error")}),J=ot({mutationFn:se=>oe.regenerateBackupCodes(se),onSuccess:se=>{e.invalidateQueries({queryKey:["2fa-status"]}),d(!1),f(""),v(se.backup_codes)},onError:()=>n(t("settings.twoFa.invalidCode"),"error")}),ue=ot({mutationFn:se=>oe.deleteOIDCLink(se),onSuccess:()=>{e.invalidateQueries({queryKey:["oidc-links"]}),n(t("settings.twoFa.oidcUnlinked"),"success")},onError:se=>n(se.message,"error")});if($)return a.jsx("div",{className:"flex items-center justify-center py-12",children:a.jsx(sr,{className:"w-6 h-6 animate-spin text-bambu-green"})});const ie=!!r?.email;return a.jsxs("div",{className:"space-y-6",children:[a.jsxs(wt,{id:"card-2fa-totp",children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsx("div",{className:`w-10 h-10 rounded-full flex items-center justify-center ${E?.totp_enabled?"bg-green-500/20":"bg-gray-500/20"}`,children:a.jsx(kF,{className:`w-5 h-5 ${E?.totp_enabled?"text-green-400":"text-gray-400"}`})}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-white font-semibold",children:t("settings.twoFa.totpTitle")}),a.jsx("p",{className:"text-bambu-gray text-sm",children:t("settings.twoFa.totpDesc")})]}),a.jsx("div",{className:"ml-auto",children:E?.totp_enabled?a.jsxs("span",{className:"flex items-center gap-1 text-green-400 text-sm font-medium",children:[a.jsx(_F,{className:"w-4 h-4"})," ",t("common.enabled")]}):a.jsxs("span",{className:"flex items-center gap-1 text-bambu-gray text-sm",children:[a.jsx(GH,{className:"w-4 h-4"})," ",t("common.disabled")]})})]})}),a.jsx(St,{children:i?a.jsxs("div",{className:"space-y-4",children:[a.jsxs("div",{className:"flex items-center justify-between mb-2",children:[a.jsx("h4",{className:"text-white font-medium",children:t("settings.twoFa.setupAuthApp")}),a.jsx("button",{onClick:()=>{s(!1),e.removeQueries({queryKey:["totp-setup"]})},className:"text-bambu-gray hover:text-white",children:a.jsx(Bt,{className:"w-5 h-5"})})]}),a.jsx(vrt,{onDone:()=>{s(!1),e.removeQueries({queryKey:["totp-setup"]})}})]}):o?a.jsxs("div",{className:"space-y-4",children:[a.jsx("p",{className:"text-bambu-gray-light text-sm",children:t("settings.twoFa.disableConfirmHint")}),a.jsx(gN,{value:u,onChange:m,placeholder:"000000 or XXXXXXXX",maxLength:8}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{l(!1),m("")},className:"flex-1",children:t("common.cancel")}),a.jsx(De,{variant:"danger",className:"flex-1",disabled:u.length<6||re.isPending,onClick:()=>re.mutate(u),children:re.isPending?t("common.saving"):t("settings.twoFa.disableTotp")})]})]}):c?a.jsxs("div",{className:"space-y-4",children:[a.jsx("p",{className:"text-bambu-gray-light text-sm",children:t("settings.twoFa.regenBackupHint")}),a.jsx(gN,{value:p,onChange:f,placeholder:"000000 or XXXXXXXX",maxLength:8}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{d(!1),f("")},className:"flex-1",children:t("common.cancel")}),a.jsx(De,{variant:"primary",className:"flex-1",disabled:p.length<6||J.isPending,onClick:()=>J.mutate(p),children:J.isPending?t("common.saving"):t("settings.twoFa.regenBackup")})]})]}):x?a.jsxs("div",{className:"space-y-4",children:[a.jsx("h4",{className:"text-white font-medium",children:t("settings.twoFa.newBackupCodes")}),a.jsx(oce,{codes:x,onDone:()=>v(null)})]}):a.jsx("div",{className:"space-y-3",children:E?.totp_enabled?a.jsxs("div",{className:"flex flex-wrap gap-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-sm text-bambu-gray-light",children:[a.jsx(ao,{className:"w-4 h-4"}),t("settings.twoFa.backupCodesRemaining",{count:E.backup_codes_remaining})]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>d(!0),className:"flex items-center gap-2",children:[a.jsx(sr,{className:"w-4 h-4"}),t("settings.twoFa.regenBackup")]}),a.jsxs(De,{variant:"danger",size:"sm",onClick:()=>l(!0),className:"flex items-center gap-2",children:[a.jsx(Zt,{className:"w-4 h-4"}),t("settings.twoFa.disableTotp")]})]}):a.jsxs(De,{variant:"primary",onClick:()=>s(!0),className:"flex items-center gap-2",children:[a.jsx(kF,{className:"w-4 h-4"}),t("settings.twoFa.setupTotp")]})})})]}),a.jsxs(wt,{id:"card-2fa-emailotp",children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsx("div",{className:`w-10 h-10 rounded-full flex items-center justify-center ${E?.email_otp_enabled?"bg-green-500/20":"bg-gray-500/20"}`,children:a.jsx(xm,{className:`w-5 h-5 ${E?.email_otp_enabled?"text-green-400":"text-gray-400"}`})}),a.jsxs("div",{className:"flex-1",children:[a.jsx("h3",{className:"text-white font-semibold",children:t("settings.twoFa.emailOtpTitle")}),a.jsx("p",{className:"text-bambu-gray text-sm",children:ie?t("settings.twoFa.emailOtpDesc",{email:r?.email}):t("settings.twoFa.emailOtpNoEmail")})]}),a.jsx("div",{className:"ml-auto",children:E?.email_otp_enabled?a.jsxs("span",{className:"flex items-center gap-1 text-green-400 text-sm font-medium",children:[a.jsx(_F,{className:"w-4 h-4"})," ",t("common.enabled")]}):a.jsxs("span",{className:"flex items-center gap-1 text-bambu-gray text-sm",children:[a.jsx(GH,{className:"w-4 h-4"})," ",t("common.disabled")]})})]})}),a.jsx(St,{children:ie?b?a.jsxs("div",{className:"space-y-4",children:[a.jsx("p",{className:"text-bambu-gray-light text-sm",children:t("settings.twoFa.emailSetupEnterCode")}),a.jsx(gN,{value:S,onChange:N,placeholder:"000000"}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{g(null),N("")},className:"flex-1",children:t("common.cancel")}),a.jsx(De,{variant:"primary",className:"flex-1",disabled:S.length!==6||R.isPending,onClick:()=>R.mutate(),children:R.isPending?t("common.saving"):t("settings.twoFa.verifyAndEnable")})]})]}):P?a.jsxs("div",{className:"space-y-4",children:[a.jsx("p",{className:"text-bambu-gray-light text-sm",children:t("settings.twoFa.emailDisablePasswordHint")}),a.jsxs("div",{className:"relative",children:[a.jsx("input",{type:F?"text":"password",value:A,onChange:se=>T(se.target.value),placeholder:t("settings.twoFa.passwordPlaceholder"),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors"}),a.jsx("button",{type:"button",onClick:()=>k(!F),className:"absolute right-3 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white",children:F?a.jsx($g,{className:"w-5 h-5"}):a.jsx(pl,{className:"w-5 h-5"})})]}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{C(!1),T("")},className:"flex-1",children:t("common.cancel")}),a.jsx(De,{variant:"danger",className:"flex-1",disabled:!A||ne.isPending,onClick:()=>ne.mutate(A),children:ne.isPending?t("common.saving"):t("settings.twoFa.disableEmailOtp")})]})]}):a.jsx("div",{className:"flex gap-3",children:E?.email_otp_enabled?a.jsxs(De,{variant:"danger",size:"sm",onClick:()=>C(!0),className:"flex items-center gap-2",children:[a.jsx(Zt,{className:"w-4 h-4"}),t("settings.twoFa.disableEmailOtp")]}):a.jsxs(De,{variant:"primary",disabled:!ie||X.isPending,onClick:()=>X.mutate(),className:"flex items-center gap-2",children:[a.jsx(xm,{className:"w-4 h-4"}),X.isPending?t("common.saving"):t("settings.twoFa.enableEmailOtp")]})}):a.jsx("p",{className:"text-amber-400 text-sm",children:t("settings.twoFa.addEmailFirst")})})]}),z&&z.length>0&&a.jsxs(wt,{id:"card-2fa-linked",children:[a.jsxs(pn,{children:[a.jsx("h3",{className:"text-white font-semibold",children:t("settings.twoFa.linkedAccounts")}),a.jsx("p",{className:"text-bambu-gray text-sm",children:t("settings.twoFa.linkedAccountsDesc")})]}),a.jsx(St,{children:a.jsx("div",{className:"space-y-3",children:z.map(se=>a.jsxs("div",{className:"flex items-center justify-between py-2 border-b border-bambu-dark-tertiary last:border-0",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm font-medium",children:se.provider_name}),se.provider_email&&a.jsx("p",{className:"text-bambu-gray text-xs",children:se.provider_email})]}),a.jsx(De,{variant:"danger",size:"sm",onClick:()=>ue.mutate(se.provider_id),disabled:ue.isPending,children:a.jsx(Zt,{className:"w-4 h-4"})})]},se.id))})})]})]})}const Srt={name:"",issuer_url:"",client_id:"",client_secret:"",scopes:"openid email profile",is_enabled:!0,auto_create_users:!1,auto_link_existing_accounts:!1,email_claim:"email",require_email_verified:!0,icon_url:void 0};function qY({initial:t,isEdit:e=!1,onSave:n,onCancel:r,isPending:i}){const{t:s}=_t(),[o,l]=w.useState(t),[c,d]=w.useState(!1),u=(g,S)=>l(N=>({...N,[g]:S})),m="w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors text-sm",p="block text-sm font-medium text-white mb-1",f=()=>{const g={...o};e&&!c&&delete g.client_secret,n(g)},x=o.auto_link_existing_accounts===!0,v=o.require_email_verified??!0;let b;return x?b=s("settings.oidc.form.requireEmailVerifiedAutoLink"):v?b=s("settings.oidc.form.requireEmailVerifiedDesc"):b=a.jsx("span",{className:"text-red-400",children:s("settings.oidc.form.requireEmailVerifiedWarning")}),a.jsxs("div",{className:"space-y-4",children:[a.jsxs("div",{className:"grid grid-cols-1 sm:grid-cols-2 gap-4",children:[a.jsxs("div",{children:[a.jsxs("label",{className:p,children:[s("settings.oidc.form.name")," ",a.jsx("span",{className:"text-red-400",children:"*"})]}),a.jsx("input",{className:m,value:o.name,onChange:g=>u("name",g.target.value),placeholder:"Google"})]}),a.jsxs("div",{children:[a.jsxs("label",{className:p,children:[s("settings.oidc.form.issuerUrl")," ",a.jsx("span",{className:"text-red-400",children:"*"})]}),a.jsx("input",{className:m,value:o.issuer_url,onChange:g=>u("issuer_url",g.target.value),placeholder:"https://accounts.google.com"})]}),a.jsxs("div",{children:[a.jsxs("label",{className:p,children:[s("settings.oidc.form.clientId")," ",a.jsx("span",{className:"text-red-400",children:"*"})]}),a.jsx("input",{className:m,value:o.client_id,onChange:g=>u("client_id",g.target.value),placeholder:"your-client-id"})]}),a.jsxs("div",{children:[a.jsxs("label",{className:p,children:[s("settings.oidc.form.clientSecret"),!e&&a.jsx("span",{className:"text-red-400",children:" *"}),e&&a.jsxs("span",{className:"text-bambu-gray text-xs ml-1",children:["(",s("settings.oidc.form.secretHint"),")"]})]}),a.jsx("input",{className:m,type:"password",value:c?o.client_secret:"",placeholder:e&&!c?"••••••••":s("settings.oidc.form.secretPlaceholder"),onChange:g=>{d(!0),u("client_secret",g.target.value)}})]}),a.jsxs("div",{children:[a.jsx("label",{className:p,children:s("settings.oidc.form.scopes")}),a.jsx("input",{className:m,value:o.scopes,onChange:g=>u("scopes",g.target.value),placeholder:"openid email profile"})]}),a.jsxs("div",{children:[a.jsx("label",{className:p,children:s("settings.oidc.form.iconUrl")}),a.jsx("input",{className:m,value:o.icon_url??"",onChange:g=>u("icon_url",g.target.value||void 0),placeholder:"https://..."})]})]}),a.jsxs("div",{className:"flex flex-wrap gap-6 pt-2",children:[a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer",children:[a.jsx(Ln,{checked:o.is_enabled??!0,onChange:g=>u("is_enabled",g)}),a.jsx("span",{className:"text-white text-sm",children:s("settings.oidc.form.enabled")})]}),a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer",children:[a.jsx(Ln,{checked:o.auto_create_users??!1,onChange:g=>u("auto_create_users",g)}),a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm",children:s("settings.oidc.form.autoCreate")}),a.jsx("p",{className:"text-bambu-gray text-xs",children:s("settings.oidc.form.autoCreateDesc")})]})]}),a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer w-full",children:[a.jsx(Ln,{checked:o.auto_link_existing_accounts??!1,onChange:g=>u("auto_link_existing_accounts",g)}),a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm",children:s("settings.oidc.form.autoLink")}),a.jsx("p",{className:"text-bambu-gray text-xs",children:s("settings.oidc.form.autoLinkDesc")})]})]}),a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer w-full",children:[a.jsx(Ln,{checked:v,onChange:g=>u("require_email_verified",g),disabled:x}),a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm",children:s("settings.oidc.form.requireEmailVerified")}),a.jsx("p",{className:"text-bambu-gray text-xs",children:b})]})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:p,children:s("settings.oidc.form.emailClaim")}),a.jsx("input",{className:m,value:o.email_claim,onChange:g=>u("email_claim",g.target.value||"email"),placeholder:s("settings.oidc.form.emailClaimPlaceholder")}),a.jsx("p",{className:"text-bambu-gray text-xs mt-1",children:s("settings.oidc.form.emailClaimDesc")}),x&&o.email_claim!=="email"&&a.jsx("p",{className:"text-yellow-400 text-xs mt-1",children:s("settings.oidc.form.emailClaimCustomClaimAutoLinkWarning")})]}),a.jsxs("div",{className:"flex gap-3 pt-2",children:[a.jsx(De,{variant:"secondary",onClick:r,className:"flex-1",children:s("common.cancel")}),a.jsx(De,{variant:"primary",className:"flex-1",disabled:!o.name||!o.issuer_url||!o.client_id||!e&&!o.client_secret||e&&c&&!o.client_secret||i,onClick:f,children:s(i?"common.saving":"common.save")})]})]})}function _rt(){const{t}=_t(),e=tn(),{showToast:n}=rn(),[r,i]=w.useState(!1),[s,o]=w.useState(null),[l,c]=w.useState(null),{data:d,isLoading:u}=Qe({queryKey:["oidc-providers-all"],queryFn:()=>oe.getOIDCProvidersAll()}),m=ot({mutationFn:v=>oe.createOIDCProvider(v),onSuccess:()=>{e.invalidateQueries({queryKey:["oidc-providers-all"]}),i(!1),n(t("settings.oidc.created"),"success")},onError:v=>n(v.message,"error")}),p=ot({mutationFn:({id:v,data:b})=>oe.updateOIDCProvider(v,b),onSuccess:()=>{e.invalidateQueries({queryKey:["oidc-providers-all"]}),o(null),n(t("settings.oidc.updated"),"success")},onError:v=>n(v.message,"error")}),f=ot({mutationFn:v=>oe.deleteOIDCProvider(v),onSuccess:()=>{e.invalidateQueries({queryKey:["oidc-providers-all"]}),c(null),n(t("settings.oidc.deleted"),"success")},onError:v=>n(v.message,"error")}),x=v=>p.mutate({id:v.id,data:{is_enabled:!v.is_enabled}});return u?a.jsx("div",{className:"flex items-center justify-center py-12",children:a.jsx(sr,{className:"w-6 h-6 animate-spin text-bambu-green"})}):a.jsxs("div",{className:"space-y-6",children:[a.jsxs(wt,{id:"card-oidc",children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("h3",{className:"text-white font-semibold",children:t("settings.oidc.title")}),a.jsx("p",{className:"text-bambu-gray text-sm",children:t("settings.oidc.desc")})]}),!r&&a.jsxs(De,{variant:"primary",size:"sm",onClick:()=>i(!0),className:"flex items-center gap-2",children:[a.jsx(nr,{className:"w-4 h-4"}),t("settings.oidc.addProvider")]})]})}),r&&a.jsx(St,{children:a.jsxs("div",{className:"border-t border-bambu-dark-tertiary pt-4",children:[a.jsx("h4",{className:"text-white font-medium mb-4",children:t("settings.oidc.newProvider")}),a.jsx(qY,{initial:Srt,onSave:v=>m.mutate(v),onCancel:()=>i(!1),isPending:m.isPending})]})})]}),d&&d.length===0&&!r&&a.jsx(wt,{id:"card-oidc-empty",children:a.jsx(St,{children:a.jsxs("div",{className:"text-center py-8 space-y-3",children:[a.jsx(qs,{className:"w-12 h-12 text-bambu-gray mx-auto"}),a.jsx("p",{className:"text-bambu-gray",children:t("settings.oidc.empty")}),a.jsxs(De,{variant:"primary",size:"sm",onClick:()=>i(!0),className:"inline-flex items-center gap-2",children:[a.jsx(nr,{className:"w-4 h-4"}),t("settings.oidc.addProvider")]})]})})}),d?.map(v=>a.jsxs(wt,{children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center gap-3",children:[v.icon_url?a.jsx("img",{src:v.icon_url,alt:v.name,className:"w-8 h-8 rounded object-contain",onError:b=>{b.target.style.display="none"}}):a.jsx("div",{className:"w-8 h-8 rounded-full bg-bambu-dark-tertiary flex items-center justify-center",children:a.jsx(qs,{className:"w-4 h-4 text-bambu-gray"})}),a.jsxs("div",{className:"flex-1",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("h4",{className:"text-white font-medium",children:v.name}),v.is_enabled?a.jsxs("span",{className:"flex items-center gap-1 text-xs text-green-400 bg-green-400/10 px-2 py-0.5 rounded-full",children:[a.jsx(jr,{className:"w-3 h-3"})," ",t("common.enabled")]}):a.jsxs("span",{className:"flex items-center gap-1 text-xs text-bambu-gray bg-bambu-dark-tertiary px-2 py-0.5 rounded-full",children:[a.jsx(Bt,{className:"w-3 h-3"})," ",t("common.disabled")]})]}),a.jsxs("div",{className:"flex items-center gap-1 text-bambu-gray text-xs mt-0.5",children:[a.jsx(Ar,{className:"w-3 h-3"}),a.jsx("span",{children:v.issuer_url})]})]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(Ln,{checked:v.is_enabled,onChange:()=>x(v),disabled:p.isPending}),a.jsx(De,{variant:"secondary",size:"sm",onClick:()=>o(s===v.id?null:v.id),children:a.jsx(Ju,{className:"w-4 h-4"})}),a.jsx(De,{variant:"danger",size:"sm",onClick:()=>c(v),children:a.jsx(Zt,{className:"w-4 h-4"})})]})]})}),s===v.id&&a.jsx(St,{children:a.jsx("div",{className:"border-t border-bambu-dark-tertiary pt-4",children:a.jsx(qY,{isEdit:!0,initial:{name:v.name,issuer_url:v.issuer_url,client_id:v.client_id,client_secret:"",scopes:v.scopes,is_enabled:v.is_enabled,auto_create_users:v.auto_create_users,auto_link_existing_accounts:v.auto_link_existing_accounts,email_claim:v.email_claim,require_email_verified:v.require_email_verified,icon_url:v.icon_url??void 0},onSave:b=>p.mutate({id:v.id,data:b}),onCancel:()=>o(null),isPending:p.isPending})})}),s!==v.id&&a.jsx(St,{children:a.jsxs("dl",{className:"grid grid-cols-2 sm:grid-cols-3 gap-x-6 gap-y-2 text-sm",children:[a.jsxs("div",{children:[a.jsx("dt",{className:"text-bambu-gray",children:t("settings.oidc.form.clientId")}),a.jsx("dd",{className:"text-white font-mono truncate",children:v.client_id})]}),a.jsxs("div",{children:[a.jsx("dt",{className:"text-bambu-gray",children:t("settings.oidc.form.scopes")}),a.jsx("dd",{className:"text-white",children:v.scopes})]}),a.jsxs("div",{children:[a.jsx("dt",{className:"text-bambu-gray",children:t("settings.oidc.form.autoCreate")}),a.jsx("dd",{className:v.auto_create_users?"text-green-400":"text-bambu-gray",children:v.auto_create_users?t("common.yes"):t("common.no")})]}),a.jsxs("div",{children:[a.jsx("dt",{className:"text-bambu-gray",children:t("settings.oidc.form.autoLink")}),a.jsx("dd",{className:v.auto_link_existing_accounts?"text-green-400":"text-bambu-gray",children:v.auto_link_existing_accounts?t("common.yes"):t("common.no")})]}),a.jsxs("div",{children:[a.jsx("dt",{className:"text-bambu-gray",children:t("settings.oidc.form.emailClaim")}),a.jsx("dd",{className:"text-white font-mono",children:v.email_claim})]}),a.jsxs("div",{children:[a.jsx("dt",{className:"text-bambu-gray",children:t("settings.oidc.form.requireEmailVerified")}),a.jsx("dd",{className:v.require_email_verified?"text-green-400":"text-red-400",children:v.require_email_verified?t("common.yes"):t("common.no")})]})]})})]},v.id)),l&&a.jsx(yn,{title:t("settings.oidc.deleteTitle"),message:t("settings.oidc.deleteMessage",{name:l.name}),confirmText:t("common.delete"),variant:"danger",onConfirm:()=>f.mutate(l.id),onCancel:()=>c(null)})]})}const krt={get:"bg-blue-500/20 text-blue-400 border-blue-500/30",post:"bg-green-500/20 text-green-400 border-green-500/30",put:"bg-yellow-500/20 text-yellow-400 border-yellow-500/30",patch:"bg-orange-500/20 text-orange-400 border-orange-500/30",delete:"bg-red-500/20 text-red-400 border-red-500/30"};function Nrt(t,e){const n=e.replace("#/","").split("/");let r=t;for(const i of n)r=r[i];return r}function A0(t,e,n=0){if(n>5)return"...";if(e.$ref)return A0(t,Nrt(t,e.$ref),n+1);if(e.allOf){const r={};for(const i of e.allOf){const s=A0(t,i,n+1);typeof s=="object"&&s!==null&&Object.assign(r,s)}return r}if(e.example!==void 0)return e.example;if(e.default!==void 0)return e.default;switch(e.type){case"string":return e.enum?e.enum[0]:"string";case"integer":case"number":return 0;case"boolean":return!1;case"array":return e.items?[A0(t,e.items,n+1)]:[];case"object":if(e.properties){const r={};for(const[i,s]of Object.entries(e.properties))r[i]=A0(t,s,n+1);return r}return{};default:return null}}function Crt({path:t,method:e,spec:n,schema:r,apiKey:i}){const[s,o]=w.useState(!1),[l,c]=w.useState({}),[d,u]=w.useState(""),[m,p]=w.useState(null),[f,x]=w.useState(!1),[v,b]=w.useState(!1);w.useEffect(()=>{if(s&&n.parameters){const F={};for(const k of n.parameters)k.schema?.default!==void 0&&(F[k.name]=String(k.schema.default));c(k=>({...F,...k}))}},[s,n.parameters]),w.useEffect(()=>{if(s&&n.requestBody?.content?.["application/json"]?.schema&&!d){const F=n.requestBody.content["application/json"].schema,k=A0(r,F);u(JSON.stringify(k,null,2))}},[s,n.requestBody,r,d]);const S=(()=>{const F=[];for(const k of n.parameters||[])if(k.in==="path"||k.required){const E=l[k.name];(E===void 0||E==="")&&F.push(k.name)}return F})(),N=async()=>{if(S.length>0){p({status:0,statusText:"Validation Error",headers:{},body:`Missing required parameters: ${S.join(", ")}`,duration:0});return}x(!0),p(null);try{let F=t;const k=new URLSearchParams;for(const se of n.parameters||[]){const K=l[se.name];K!==void 0&&K!==""&&(se.in==="path"?F=F.replace(`{${se.name}}`,encodeURIComponent(K)):se.in==="query"&&k.append(se.name,K))}const E=k.toString(),$=`${F}${E?`?${E}`:""}`,z={"Content-Type":"application/json"};i&&(z["X-API-Key"]=i);const X={method:e.toUpperCase(),headers:z};["post","put","patch"].includes(e)&&d&&(X.body=d);const R=performance.now(),ne=await fetch($,X),re=Math.round(performance.now()-R),J={};ne.headers.forEach((se,K)=>{J[K]=se});let ue;ne.headers.get("content-type")?.includes("application/json")?ue=await ne.json():ue=await ne.text(),p({status:ne.status,statusText:ne.statusText,headers:J,body:ue,duration:re})}catch(F){p({status:0,statusText:"Network Error",headers:{},body:F instanceof Error?F.message:"Unknown error",duration:0})}finally{x(!1)}},P=async()=>{if(m){const F=typeof m.body=="string"?m.body:JSON.stringify(m.body,null,2);try{await navigator.clipboard.writeText(F),b(!0),setTimeout(()=>b(!1),2e3)}catch{const k=document.createElement("textarea");k.value=F,k.style.position="fixed",k.style.left="-999999px",document.body.appendChild(k),k.select(),document.execCommand("copy"),document.body.removeChild(k),b(!0),setTimeout(()=>b(!1),2e3)}}},C=(n.parameters||[]).filter(F=>F.in==="path"),A=(n.parameters||[]).filter(F=>F.in==="query"),T=["post","put","patch"].includes(e)&&n.requestBody;return a.jsxs("div",{className:"border border-bambu-dark-tertiary rounded-lg overflow-hidden",children:[a.jsxs("button",{onClick:()=>o(!s),className:"w-full flex items-center gap-3 p-3 hover:bg-bambu-dark-tertiary/50 transition-colors text-left",children:[s?a.jsx(zn,{className:"w-4 h-4 text-bambu-gray flex-shrink-0"}):a.jsx(za,{className:"w-4 h-4 text-bambu-gray flex-shrink-0"}),a.jsx("span",{className:`px-2 py-0.5 text-xs font-mono font-semibold uppercase rounded border ${krt[e]||"bg-gray-500/20 text-gray-400"}`,children:e}),a.jsx("code",{className:"text-sm text-white font-mono flex-1 truncate",children:t}),n.summary&&a.jsx("span",{className:"text-sm text-bambu-gray truncate max-w-[40%]",children:n.summary})]}),s&&a.jsxs("div",{className:"border-t border-bambu-dark-tertiary p-4 space-y-4 bg-bambu-dark/50",children:[n.description&&a.jsx("p",{className:"text-sm text-bambu-gray",children:n.description}),C.length>0&&a.jsxs("div",{className:"space-y-2",children:[a.jsx("h4",{className:"text-sm font-medium text-white",children:"Path Parameters"}),a.jsx("div",{className:"space-y-2",children:C.map(F=>a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsxs("label",{className:"text-sm text-bambu-gray w-32 flex-shrink-0",children:[F.name,F.required&&a.jsx("span",{className:"text-red-400 ml-1",children:"*"})]}),a.jsx("input",{type:"text",value:l[F.name]||"",onChange:k=>c(E=>({...E,[F.name]:k.target.value})),placeholder:F.description||F.schema?.type||"value",className:"flex-1 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm font-mono focus:border-bambu-green focus:outline-none"})]},F.name))})]}),A.length>0&&a.jsxs("div",{className:"space-y-2",children:[a.jsx("h4",{className:"text-sm font-medium text-white",children:"Query Parameters"}),a.jsx("div",{className:"space-y-2",children:A.map(F=>a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsxs("label",{className:"text-sm text-bambu-gray w-32 flex-shrink-0",children:[F.name,F.required&&a.jsx("span",{className:"text-red-400 ml-1",children:"*"})]}),F.schema?.enum?a.jsxs("select",{value:l[F.name]||"",onChange:k=>c(E=>({...E,[F.name]:k.target.value})),className:"flex-1 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"",children:"-- Select --"}),F.schema.enum.map(k=>a.jsx("option",{value:k,children:k},k))]}):a.jsx("input",{type:"text",value:l[F.name]||"",onChange:k=>c(E=>({...E,[F.name]:k.target.value})),placeholder:F.description||F.schema?.type||"value",className:"flex-1 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm font-mono focus:border-bambu-green focus:outline-none"})]},F.name))})]}),T&&a.jsxs("div",{className:"space-y-2",children:[a.jsx("h4",{className:"text-sm font-medium text-white",children:"Request Body"}),a.jsx("textarea",{value:d,onChange:F=>u(F.target.value),rows:8,className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm font-mono focus:border-bambu-green focus:outline-none resize-y",placeholder:"JSON request body..."})]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsxs(De,{onClick:N,disabled:f,children:[f?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(rs,{className:"w-4 h-4"}),"Execute"]}),S.length>0&&a.jsxs("span",{className:"text-xs text-yellow-400 flex items-center gap-1",children:[a.jsx(Oa,{className:"w-3 h-3"}),"Fill in: ",S.join(", ")]})]}),m&&a.jsxs("div",{className:"space-y-2",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("h4",{className:"text-sm font-medium text-white flex items-center gap-2",children:["Response",a.jsxs("span",{className:`px-2 py-0.5 text-xs rounded ${m.status>=200&&m.status<300?"bg-green-500/20 text-green-400":m.status>=400?"bg-red-500/20 text-red-400":"bg-yellow-500/20 text-yellow-400"}`,children:[m.status," ",m.statusText]}),a.jsxs("span",{className:"text-xs text-bambu-gray",children:[m.duration,"ms"]})]}),a.jsx(De,{variant:"secondary",size:"sm",onClick:P,children:v?a.jsx(wr,{className:"w-3 h-3 text-green-400"}):a.jsx(ns,{className:"w-3 h-3"})})]}),a.jsx("pre",{className:"p-3 bg-bambu-dark rounded-lg text-sm font-mono text-white overflow-auto max-h-96 border border-bambu-dark-tertiary",children:typeof m.body=="string"?m.body:JSON.stringify(m.body,null,2)})]})]})]})}function Prt({apiKey:t=""}){const[e,n]=w.useState(null),[r,i]=w.useState(!0),[s,o]=w.useState(null),[l,c]=w.useState(new Set),[d,u]=w.useState("");if(w.useEffect(()=>{async function b(){try{const g=await fetch("/openapi.json");if(!g.ok)throw new Error("Failed to fetch OpenAPI schema");const S=await g.json();n(S)}catch(g){o(g instanceof Error?g.message:"Unknown error")}finally{i(!1)}}b()},[]),r)return a.jsx("div",{className:"flex justify-center py-12",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})});if(s||!e)return a.jsx(wt,{children:a.jsx(St,{className:"py-8",children:a.jsxs("div",{className:"text-center text-red-400",children:[a.jsx(Oa,{className:"w-12 h-12 mx-auto mb-3 opacity-50"}),a.jsx("p",{children:"Failed to load API schema"}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:s})]})})});const m={};for(const[b,g]of Object.entries(e.paths))for(const[S,N]of Object.entries(g)){if(S==="parameters")continue;const P=N.tags||["Other"];for(const C of P)m[C]||(m[C]=[]),m[C].push({path:b,method:S,spec:N})}const p=Object.entries(m).map(([b,g])=>{if(!d)return{tag:b,endpoints:g};const S=g.filter(({path:N,method:P,spec:C})=>{const A=d.toLowerCase();return N.toLowerCase().includes(A)||P.toLowerCase().includes(A)||(C.summary?.toLowerCase()||"").includes(A)||(C.description?.toLowerCase()||"").includes(A)});return{tag:b,endpoints:S}}).filter(({endpoints:b})=>b.length>0).sort((b,g)=>b.tag.localeCompare(g.tag)),f=b=>{c(g=>{const S=new Set(g);return S.has(b)?S.delete(b):S.add(b),S})},x=()=>{c(new Set(p.map(b=>b.tag)))},v=()=>{c(new Set)};return a.jsxs("div",{className:"space-y-4",children:[a.jsxs("div",{className:"flex items-center justify-between gap-4",children:[a.jsx("div",{className:"flex-1",children:a.jsx("input",{type:"text",value:d,onChange:b=>u(b.target.value),placeholder:"Search endpoints...",className:"w-full max-w-md px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(De,{variant:"secondary",size:"sm",onClick:x,children:"Expand All"}),a.jsx(De,{variant:"secondary",size:"sm",onClick:v,children:"Collapse All"}),a.jsxs("a",{href:"/docs",target:"_blank",rel:"noopener noreferrer",className:"flex items-center gap-1 text-sm text-bambu-green hover:underline",children:[a.jsx(Ar,{className:"w-4 h-4"}),"Swagger UI"]})]})]}),a.jsxs("p",{className:"text-sm text-bambu-gray",children:[p.reduce((b,g)=>b+g.endpoints.length,0)," endpoints in ",p.length," categories"]}),a.jsx("div",{className:"space-y-3",children:p.map(({tag:b,endpoints:g})=>a.jsxs(wt,{children:[a.jsx("button",{onClick:()=>f(b),className:"w-full flex items-center justify-between p-4 hover:bg-bambu-dark-tertiary/30 transition-colors text-left",children:a.jsxs("div",{className:"flex items-center gap-2",children:[l.has(b)?a.jsx(zn,{className:"w-5 h-5 text-bambu-gray"}):a.jsx(za,{className:"w-5 h-5 text-bambu-gray"}),a.jsx("h3",{className:"text-base font-semibold text-white capitalize",children:b.replace(/-/g," ")}),a.jsx("span",{className:"text-xs bg-bambu-dark-tertiary px-2 py-0.5 rounded-full text-bambu-gray",children:g.length})]})}),l.has(b)&&a.jsx(St,{className:"pt-0 space-y-2",children:g.map(({path:S,method:N,spec:P})=>a.jsx(Crt,{path:S,method:N,spec:P,schema:e,apiKey:t},`${N}-${S}`))})]},b))})]})}const lce=new Map;function Tn(t){lce.set(t.anchor,t)}function Trt(){return Array.from(lce.values())}const Art=["general","plugs","notifications","queue","filament","network","apikeys","virtual-printer","spoolbuddy","failure-detection","users","backup"];Tn({labelKey:"settings.general",tab:"general",keywords:"language date time format printer model printers cards",anchor:"card-general"});Tn({labelKey:"settings.appearance",tab:"general",keywords:"theme dark light mode colors",anchor:"card-appearance"});Tn({labelKey:"settings.archiveSettings",tab:"general",keywords:"archive auto save thumbnails captures",anchor:"card-archive"});Tn({labelKey:"settings.camera",tab:"general",keywords:"camera external video stream",anchor:"card-camera"});Tn({labelKey:"settings.costTracking",tab:"general",keywords:"currency filament cost energy kwh price",anchor:"card-cost"});Tn({labelKey:"settings.fileManager",tab:"general",keywords:"file manager archive mode disk warning storage",anchor:"card-filemanager"});Tn({labelKey:"settings.updates",tab:"general",keywords:"updates version firmware beta check",anchor:"card-updates"});Tn({labelKey:"settings.dataManagement",tab:"general",keywords:"data reset clear logs notifications preferences",anchor:"card-data"});Tn({labelKey:"settings.smartPlugs",tab:"plugs",keywords:"smart plug energy power automation tapo kasa tplink shelly",anchor:"card-plugs"});Tn({labelKey:"settings.providers",tab:"notifications",keywords:"telegram discord email notification providers webhook",anchor:"card-providers"});Tn({labelKey:"settings.messageTemplates",tab:"notifications",keywords:"message templates notification text edit",anchor:"card-templates"});Tn({labelKey:"settings.defaultPrintOptions",labelFallback:"Default Print Options",tab:"queue",keywords:"print bed leveling flow calibration vibration first layer timelapse",anchor:"card-print-options"});Tn({labelKey:"settings.staggeredStart",labelFallback:"Staggered Start",tab:"queue",keywords:"staggered batch delay start queue group",anchor:"card-staggered"});Tn({labelKey:"settings.plateClear",labelFallback:"Plate-Clear Confirmation",tab:"queue",keywords:"plate clear confirm auto queue",anchor:"card-plate"});Tn({labelKey:"settings.gcodeInjection",labelFallback:"G-code Injection",tab:"queue",keywords:"gcode injection start end autoprint farmloop swapmod autoclear printflow",anchor:"card-gcode"});Tn({labelKey:"settings.slicerCard",labelFallback:"Slicer",tab:"queue",keywords:"slicer orcaslicer bambustudio orca bambu api sidecar url docker preferred",anchor:"card-slicer"});Tn({labelKey:"settings.queueDrying",tab:"queue",keywords:"drying presets temperature time humidity ams",anchor:"card-drying"});Tn({labelKey:"settings.filamentChecks",tab:"filament",keywords:"filament check warning runout remaining",anchor:"card-filamentchecks"});Tn({labelKey:"settings.printModal",tab:"filament",keywords:"print modal custom mapping",anchor:"card-printmodal"});Tn({labelKey:"settings.amsDisplayThresholds",tab:"filament",keywords:"ams humidity temperature threshold history retention",anchor:"card-amsthresholds"});Tn({labelKey:"settings.externalUrl",tab:"network",keywords:"external url reverse proxy public notification link",anchor:"card-externalurl"});Tn({labelKey:"settings.ftpRetry",tab:"network",keywords:"ftp retry upload retries backoff",anchor:"card-ftpretry"});Tn({labelKey:"settings.homeAssistant",tab:"network",keywords:"home assistant ha hass mqtt integration",anchor:"card-ha"});Tn({labelKey:"settings.mqttPublishing",tab:"network",keywords:"mqtt publish broker topic",anchor:"card-mqtt"});Tn({labelKey:"settings.prometheusMetrics",tab:"network",keywords:"prometheus metrics grafana monitoring bearer token",anchor:"card-prometheus"});Tn({labelKey:"settings.createNewApiKey",tab:"apikeys",keywords:"api key create permission scope",anchor:"card-createapi"});Tn({labelKey:"settings.webhookEndpoints",tab:"apikeys",keywords:"webhook endpoint post http",anchor:"card-webhooks"});Tn({labelKey:"settings.apiBrowser",tab:"apikeys",keywords:"api browser endpoint documentation test",anchor:"card-apibrowser"});Tn({labelKey:"cameraTokens.title",tab:"apikeys",keywords:"camera token long-lived home assistant frigate kiosk stream",anchor:"card-camera-tokens"});Tn({labelKey:"settings.tabs.virtualPrinter",tab:"virtual-printer",keywords:"virtual printer proxy archive slicer bambustudio orcaslicer ip bind",anchor:"card-vp"});Tn({labelKey:"settings.tabs.spoolbuddy",tab:"spoolbuddy",keywords:"spoolbuddy device scale nfc rfid kiosk unregister",anchor:"card-spoolbuddy"});Tn({labelKey:"settings.currentUser",tab:"users",subTab:"users",keywords:"current user profile password change",anchor:"card-currentuser"});Tn({labelKey:"settings.users",tab:"users",subTab:"users",keywords:"users accounts list",anchor:"card-users"});Tn({labelKey:"settings.groups",tab:"users",subTab:"users",keywords:"groups roles permissions administrators operators viewers",anchor:"card-groups"});Tn({labelKey:"settings.email.smtpSettings",labelFallback:"SMTP Configuration",tab:"users",subTab:"email",keywords:"smtp email send server port password auth starttls ssl",anchor:"card-smtp"});Tn({labelKey:"settings.ldap.title",labelFallback:"LDAP Authentication",tab:"users",subTab:"ldap",keywords:"ldap active directory ad authentication bind dn search base group mapping",anchor:"card-ldap"});Tn({labelKey:"settings.tabs.backup",tab:"backup",keywords:"backup github restore download cloud sync profiles archives",anchor:"card-backup"});Tn({labelKey:"externalLinks.title",labelFallback:"Sidebar Links",tab:"general",keywords:"sidebar links external custom navigation url add",anchor:"card-sidebar-links"});Tn({labelKey:"settings.filamentTracking",tab:"filament",keywords:"spoolman filament tracking inventory sync remote integration",anchor:"card-spoolman"});Tn({labelKey:"settings.catalog.spoolCatalog",labelFallback:"Spool Catalog",tab:"filament",keywords:"spool catalog entries brand material reset import export",anchor:"card-spool-catalog"});Tn({labelKey:"settings.colorCatalog.title",labelFallback:"Color Catalog",tab:"filament",keywords:"color catalog hex swatch palette sync reset",anchor:"card-color-catalog"});Tn({labelKey:"settings.tabs.failureDetection",labelFallback:"Failure Detection",tab:"failure-detection",keywords:"failure detection ai ml obico spaghetti detect monitoring",anchor:"card-fd-ml"});Tn({labelKey:"failureDetection.perPrinterTitle",labelFallback:"Per-Printer Settings",tab:"failure-detection",keywords:"failure detection per printer enable per-printer sensitivity",anchor:"card-fd-perprinter"});Tn({labelKey:"failureDetection.statusTitle",labelFallback:"Detection Status",tab:"failure-detection",keywords:"failure detection status running connection",anchor:"card-fd-status"});Tn({labelKey:"failureDetection.historyTitle",labelFallback:"Detection History",tab:"failure-detection",keywords:"failure detection history log events",anchor:"card-fd-history"});Tn({labelKey:"settings.email.advancedAuth",labelFallback:"Advanced Email Authentication",tab:"users",subTab:"email",keywords:"email authentication advanced password reset self-service forgot",anchor:"card-email-advanced-auth"});Tn({labelKey:"settings.email.testConnection",labelFallback:"Test SMTP Connection",tab:"users",subTab:"email",keywords:"email smtp test connection send check",anchor:"card-email-test"});Tn({labelKey:"settings.twoFa.totpTitle",labelFallback:"Authenticator App (TOTP)",tab:"users",subTab:"twofa",keywords:"two factor 2fa totp authenticator app google authy otp",anchor:"card-2fa-totp"});Tn({labelKey:"settings.twoFa.emailOtpTitle",labelFallback:"Email One-Time Codes",tab:"users",subTab:"twofa",keywords:"two factor 2fa email otp one time code",anchor:"card-2fa-emailotp"});Tn({labelKey:"settings.twoFa.linkedAccounts",labelFallback:"Linked Accounts",tab:"users",subTab:"twofa",keywords:"two factor 2fa linked accounts sso oidc provider google github",anchor:"card-2fa-linked"});Tn({labelKey:"settings.oidc.title",labelFallback:"Single Sign-On (OIDC)",tab:"users",subTab:"oidc",keywords:"sso oidc openid single sign-on pocketid authentik keycloak google okta azure provider",anchor:"card-oidc"});Tn({labelKey:"settings.ldap.serverConfig",labelFallback:"LDAP Server Configuration",tab:"users",subTab:"ldap",keywords:"ldap server url bind dn user search base group filter tls",anchor:"card-ldap-server"});Tn({labelKey:"backup.githubBackup",labelFallback:"GitHub Backup",tab:"backup",keywords:"github backup cloud remote sync profiles token",anchor:"card-backup-github"});Tn({labelKey:"backup.history",labelFallback:"Backup History",tab:"backup",keywords:"backup history log runs github commits",anchor:"card-backup-history"});Tn({labelKey:"backup.localBackup",labelFallback:"Local Backup",tab:"backup",keywords:"local backup download zip manual export",anchor:"card-backup-local"});Tn({labelKey:"backup.scheduledBackup",labelFallback:"Scheduled Backups",tab:"backup",keywords:"scheduled backup automatic hourly daily weekly retention local path",anchor:"card-backup-scheduled"});const jrt={database:"bg-blue-600",library_files:"bg-green-500",library_thumbnails:"bg-teal-500",library_other:"bg-emerald-700",archive_timelapses:"bg-red-500",archive_thumbnails:"bg-amber-500",archive_files:"bg-sky-500",virtual_printer_uploads:"bg-purple-500",virtual_printer_upload_cache:"bg-fuchsia-500",virtual_printer_certs:"bg-violet-500",virtual_printer_other:"bg-purple-700",downloads:"bg-cyan-500",plate_calibration:"bg-lime-500",logs:"bg-orange-500",other_data:"bg-yellow-500"},$Y=["bg-blue-500","bg-green-500","bg-yellow-500","bg-red-500","bg-orange-500","bg-teal-500","bg-cyan-500","bg-purple-500"],VY=(t,e)=>jrt[t]||$Y[e%$Y.length];function Mrt(){const t=tn(),e=as(),[n,r]=rS(),{t:i,i18n:s}=_t(),{showToast:o}=rn(),{authEnabled:l,user:c,isAdmin:d,refreshAuth:u,hasPermission:m}=gr(),{mode:p,darkStyle:f,darkBackground:x,darkAccent:v,lightStyle:b,lightBackground:g,lightAccent:S,setDarkStyle:N,setDarkBackground:P,setDarkAccent:C,setLightStyle:A,setLightBackground:T,setLightAccent:F}=Gg(),[k,E]=w.useState(null),[$,z]=w.useState(!1),[X,R]=w.useState(null),[ne,re]=w.useState(!1),[J,ue]=w.useState(null),[ie,se]=w.useState(null),[K,ae]=w.useState(""),[pe,be]=w.useState(""),[fe,B]=w.useState(!1),[Y,D]=w.useState(jJ()),M=n.get("tab"),U=M==="email",Q=U?"users":M&&Art.includes(M)?M:"general",[O,ce]=w.useState(Q),[I,G]=w.useState(U?"email":"users"),q=_e=>{ce(_e),_e==="users"&&G("users"),_e==="general"?n.delete("tab"):n.set("tab",_e),r(n,{replace:!0})},[W,te]=w.useState(!1),[le,ye]=w.useState(""),[he,me]=w.useState({can_queue:!0,can_control_printer:!1,can_read_status:!0}),[H,L]=w.useState(null),[ee,ge]=w.useState(null),[ke,je]=w.useState(""),[Te,xe]=w.useState(!1),[Fe,Be]=w.useState(!1),[Ce,ze]=w.useState(null),[Me,Oe]=w.useState(!1),[Ge,et]=w.useState(!1),[ve,Xe]=w.useState(!1),[Pe,Ve]=w.useState({currentPassword:"",newPassword:"",confirmPassword:""}),[we,de]=w.useState(!1),[Se,$e]=w.useState(!1),[st,He]=w.useState(!1),[at,ht]=w.useState(!1),[Mt,qt]=w.useState(null),[Vt,Gt]=w.useState(null),[Qt,an]=w.useState(null),[mn,dn]=w.useState(!1),[jt,Jt]=w.useState({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]}),[zt,Tt]=w.useState(null),[Ie,Re]=w.useState(null),[Ye,Ze]=w.useState(!1),[Le,dt]=w.useState({}),[Ae,We]=w.useState({}),tt=_e=>{D(_e),pve(_e),o(i("settings.toast.settingsSaved"),"success")},nt=()=>{localStorage.removeItem("sidebarOrder"),window.location.reload()},Je=!!k?.default_sidebar_order,Ue=async _e=>{try{if(_e){let Et;const Fn=localStorage.getItem("sidebarOrder");try{Et=Fn?JSON.parse(Fn):Zu.map(it=>it.id)}catch{Et=Zu.map(it=>it.id)}(!Array.isArray(Et)||Et.length===0)&&(Et=Zu.map(it=>it.id));const kn=JSON.stringify({order:Et});await oe.updateSettings({default_sidebar_order:kn}),E(it=>it&&{...it,default_sidebar_order:kn}),o(i("settings.sidebarDefaultSet"),"success")}else await oe.updateSettings({default_sidebar_order:""}),E(Et=>Et&&{...Et,default_sidebar_order:""}),o(i("settings.sidebarDefaultCleared"),"success");t.invalidateQueries({queryKey:["settings"]}),t.invalidateQueries({queryKey:["default-sidebar-order"]})}catch{o(i("settings.sidebarDefaultFailed"),"error")}},{data:rt,isLoading:Ct}=Qe({queryKey:["settings"],queryFn:oe.getSettings}),{data:bt,isLoading:Ot,isFetching:Lt}=Qe({queryKey:["storage-usage"],queryFn:()=>oe.getStorageUsage(),enabled:O==="general",staleTime:1/0,refetchInterval:!1,refetchOnWindowFocus:!1,refetchOnReconnect:!1}),Ft=async()=>{$e(!0);try{const _e=await oe.getStorageUsage({refresh:!0});t.setQueryData(["storage-usage"],_e)}catch(_e){const Et=_e instanceof Error?_e.message:"Failed to refresh storage usage";o(Et,"error")}finally{$e(!1)}},{data:Ke,isLoading:Ht}=Qe({queryKey:["smart-plugs"],queryFn:oe.getSmartPlugs}),{data:Yt,isLoading:on}=Qe({queryKey:["smart-plugs-energy",Ke?.map(_e=>_e.id)],queryFn:async()=>{if(!Ke||Ke.length===0)return null;const _e=await Promise.all(Ke.filter(Xt=>Xt.enabled).map(async Xt=>{try{const ct=await oe.getSmartPlugStatus(Xt.id);return{plug:Xt,status:ct}}catch{return{plug:Xt,status:null}}}));let Et=0,Fn=0,kn=0,it=0,Dt=0;for(const{plug:Xt,status:ct}of _e){const Mn=Xt.plug_type==="mqtt"&&ct?.energy?.power!=null;(ct?.reachable||Mn)&&ct?.energy&&(Dt++,ct.energy?.power!=null&&(Et+=ct.energy.power),ct.energy?.today!=null&&(Fn+=ct.energy.today),ct.energy?.yesterday!=null&&(kn+=ct.energy.yesterday),ct.energy?.total!=null&&(it+=ct.energy.total))}return{totalPower:Et,totalToday:Fn,totalYesterday:kn,totalLifetime:it,reachableCount:Dt,totalPlugs:Ke.filter(Xt=>Xt.enabled).length}},enabled:O==="plugs"&&!!Ke&&Ke.length>0,refetchInterval:O==="plugs"?1e4:!1}),{data:wn,isLoading:gn}=Qe({queryKey:["notification-providers"],queryFn:oe.getNotificationProviders}),{data:_n,isLoading:xn}=Qe({queryKey:["api-keys"],queryFn:oe.getAPIKeys}),br=ot({mutationFn:_e=>oe.createAPIKey(_e),onSuccess:_e=>{L(_e.key||null),te(!1),ye(""),t.invalidateQueries({queryKey:["api-keys"]}),o(i("settings.toast.apiKeyCreated"))},onError:_e=>{o(`Failed to create API key: ${_e.message}`,"error")}}),Tr=ot({mutationFn:_e=>oe.deleteAPIKey(_e),onSuccess:(_e,Et)=>{t.setQueryData(["api-keys"],Fn=>(Fn??[]).filter(kn=>kn.id!==Et)),o(i("settings.toast.apiKeyDeleted"))},onError:_e=>{o(`Failed to delete API key: ${_e.message}`,"error")}}),{data:On}=Qe({queryKey:["printers"],queryFn:oe.getPrinters}),{data:Ra,isLoading:$n}=Qe({queryKey:["notification-templates"],queryFn:oe.getNotificationTemplates}),{data:Br}=Qe({queryKey:["virtual-printer-settings"],queryFn:CF.getSettings,refetchInterval:1e4}),Kr=Br?.status?.running??!1,{data:ur}=Qe({queryKey:["spoolbuddy-devices"],queryFn:()=>Wr.getDevices(),refetchInterval:15e3}),Hr=ur?.length??0,or=ur?.some(_e=>_e.online)??!1,{data:ki}=Qe({queryKey:["obico-status"],queryFn:oe.getObicoStatus,refetchInterval:15e3}),Oi=!!(ki?.is_running&&ki?.enabled),{data:yc}=Qe({queryKey:["ffmpeg-status"],queryFn:oe.checkFfmpeg}),{data:yl}=Qe({queryKey:["version"],queryFn:oe.getVersion}),Pt=!l||m("library:purge"),{data:Dn}=Qe({queryKey:["library-trash-settings"],queryFn:()=>oe.getLibraryTrashSettings(),enabled:Pt}),mr=ot({mutationFn:_e=>oe.updateLibraryTrashSettings(_e),onSuccess:()=>{t.invalidateQueries({queryKey:["library-trash-settings"]}),o(i("settings.toast.settingsSaved"),"success")},onError:_e=>o(_e.message||i("libraryAutoPurge.saveFailed"),"error")}),Wt=_e=>{Dn&&mr.mutate({retention_days:Dn.retention_days,auto_purge_enabled:Dn.auto_purge_enabled,auto_purge_days:Dn.auto_purge_days,auto_purge_include_never_printed:Dn.auto_purge_include_never_printed,..._e})},Ms=!l||m("archives:purge"),{data:vo}=Qe({queryKey:["archive-purge-settings"],queryFn:()=>oe.getArchivePurgeSettings(),enabled:Ms}),td=ot({mutationFn:_e=>oe.updateArchivePurgeSettings(_e),onSuccess:()=>{t.invalidateQueries({queryKey:["archive-purge-settings"]}),o(i("settings.toast.settingsSaved"),"success")},onError:_e=>o(_e.message||i("archiveAutoPurge.saveFailed"),"error")}),vl=_e=>{vo&&td.mutate({enabled:vo.enabled,days:vo.days,..._e})},{data:Ir,refetch:nd,isRefetching:$p}=Qe({queryKey:["updateCheck"],queryFn:oe.checkForUpdates,enabled:rt?.check_updates!==!1,staleTime:300*1e3}),{data:ls,refetch:$o}=Qe({queryKey:["updateStatus"],queryFn:oe.getUpdateStatus,refetchInterval:_e=>{const Et=_e.state.data;return Et?.status==="downloading"||Et?.status==="installing"?1e3:!1}}),{data:zi}=Qe({queryKey:["mqtt-status"],queryFn:oe.getMQTTStatus,refetchInterval:O==="network"?5e3:!1}),{data:wl}=Qe({queryKey:["github-backup-status"],queryFn:oe.getGitHubBackupStatus}),{data:wo}=Qe({queryKey:["cloud-status"],queryFn:oe.getCloudStatus}),{data:ha={advanced_auth_enabled:!1,smtp_configured:!1}}=Qe({queryKey:["advancedAuthStatus"],queryFn:()=>oe.getAdvancedAuthStatus()}),{data:vc}=Qe({queryKey:["ldapStatus"],queryFn:()=>oe.getLDAPStatus()}),{data:Im}=Qe({queryKey:["twoFAStatus"],queryFn:()=>oe.get2FAStatus()}),{data:ru=[]}=Qe({queryKey:["oidcProvidersAll"],queryFn:()=>oe.getOIDCProvidersAll(),enabled:d}),{data:rd=[],isLoading:Vp}=Qe({queryKey:["users"],queryFn:()=>oe.getUsers(),enabled:l&&m("users:read")}),{data:ka=[],isLoading:Es}=Qe({queryKey:["groups"],queryFn:()=>oe.getGroups(),enabled:l&&m("groups:read")}),Vo=ot({mutationFn:_e=>oe.createUser(_e),onSuccess:()=>{t.invalidateQueries({queryKey:["users"]}),t.invalidateQueries({queryKey:["groups"]}),He(!1),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]}),o(i("settings.toast.userCreated"))},onError:_e=>{o(_e.message,"error")}}),wc=ot({mutationFn:({id:_e,data:Et})=>oe.updateUser(_e,Et),onSuccess:()=>{t.invalidateQueries({queryKey:["users"]}),t.invalidateQueries({queryKey:["groups"]}),ht(!1),qt(null),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]}),o(i("settings.toast.userUpdated"))},onError:_e=>{o(_e.message,"error")}}),Sl=ot({mutationFn:({id:_e,deleteItems:Et})=>oe.deleteUser(_e,Et),onSuccess:()=>{t.invalidateQueries({queryKey:["users"]}),o(i("settings.toast.userDeleted")),Gt(null),an(null)},onError:_e=>{o(_e.message,"error")}}),ad=ot({mutationFn:_e=>oe.resetUserPassword({user_id:_e}),onSuccess:_e=>{o(_e.message,"success")},onError:_e=>{o(_e.message,"error")}}),Gp=async _e=>{Gt(_e),dn(!0);try{const Et=await oe.getUserItemsCount(_e);an(Et)}catch{an({archives:0,queue_items:0,library_files:0})}finally{dn(!1)}},_l=ot({mutationFn:_e=>oe.deleteGroup(_e),onSuccess:()=>{t.invalidateQueries({queryKey:["groups"]}),o(i("settings.toast.groupDeleted"))},onError:_e=>{o(_e.message,"error")}}),id=()=>{const _e=ha?.advanced_auth_enabled||!1;if(!jt.username){o(i("settings.toast.fillRequiredFields"),"error");return}if(_e&&!jt.email){o("Email is required when advanced authentication is enabled","error");return}if(!_e){if(!jt.password){o(i("settings.toast.fillRequiredFields"),"error");return}if(jt.password!==jt.confirmPassword){o(i("settings.toast.passwordsDoNotMatch"),"error");return}if(jt.password.length<6){o(i("settings.toast.passwordTooShort"),"error");return}}Vo.mutate({username:jt.username,password:_e?void 0:jt.password,email:jt.email||void 0,role:jt.role,group_ids:jt.group_ids.length>0?jt.group_ids:void 0})},Om=_e=>{if(jt.password){if(jt.password!==jt.confirmPassword){o(i("settings.toast.passwordsDoNotMatch"),"error");return}if(jt.password.length<6){o(i("settings.toast.passwordTooShort"),"error");return}}const Et={username:jt.username||void 0,password:jt.password||void 0,email:jt.email||void 0,role:jt.role,group_ids:jt.group_ids};Et.password||delete Et.password,wc.mutate({id:_e,data:Et})},sd=_e=>{qt(_e.id),Jt({username:_e.username,password:"",email:_e.email||"",confirmPassword:"",role:_e.role,group_ids:_e.groups?.map(Et=>Et.id)||[]}),ht(!0)},od=_e=>{Jt(Et=>({...Et,group_ids:Et.group_ids.includes(_e)?Et.group_ids.filter(Fn=>Fn!==_e):[...Et.group_ids,_e]}))},au=ot({mutationFn:oe.applyUpdate,onSuccess:_e=>{_e.is_docker?o(_e.message,"error"):$o()}}),[ci,iu]=w.useState(null),zm=ot({mutationFn:oe.testAllNotificationProviders,onSuccess:_e=>{iu(_e),t.invalidateQueries({queryKey:["notification-providers"]}),_e.failed===0?o(`All ${_e.tested} providers tested successfully!`,"success"):o(`${_e.success}/${_e.tested} providers succeeded`,_e.failed>0?"error":"success")},onError:_e=>{o(`Failed to test providers: ${_e.message}`,"error")}}),Ys=ot({mutationFn:async _e=>{if(!Ke)return{success:0,failed:0};const Et=Ke.filter(kn=>kn.enabled),Fn=await Promise.all(Et.map(async kn=>{try{return await oe.controlSmartPlug(kn.id,_e),{success:!0}}catch{return{success:!1}}}));return{success:Fn.filter(kn=>kn.success).length,failed:Fn.filter(kn=>!kn.success).length}},onSuccess:(_e,Et)=>{t.invalidateQueries({queryKey:["smart-plugs"]}),t.invalidateQueries({queryKey:["smart-plugs-energy"]}),_e.failed===0?o(`All ${_e.success} plugs turned ${Et}`,"success"):o(`${_e.success} plugs turned ${Et}, ${_e.failed} failed`,"error")},onError:_e=>{o(`Failed: ${_e.message}`,"error")}}),su=w.useRef(null),kl=w.useRef(null),Nl=w.useRef(!1),ou=w.useRef(!0);w.useEffect(()=>{if(rt&&!k){const _e={...rt,external_url:rt.external_url||window.location.origin};E(_e),setTimeout(()=>{ou.current=!1},100)}},[rt,k]);const Um=ot({mutationFn:oe.updateSettings,onSuccess:_e=>{t.setQueryData(["settings"],_e),t.invalidateQueries({queryKey:["archiveStats"]}),o(i("settings.toast.settingsSaved"),"success")},onError:_e=>{o(`Failed to save: ${_e.message}`,"error")},onSettled:()=>{Nl.current=!1}}),Zg=ot({mutationFn:({id:_e,data:Et})=>oe.updatePrinter(_e,Et),onSuccess:()=>{t.invalidateQueries({queryKey:["printers"]}),o(i("settings.toast.cameraSettingsSaved"),"success")},onError:_e=>{o(`Failed to update printer: ${_e.message}`,"error")}});w.useEffect(()=>{if(!(ou.current||!k||!rt||l&&!m("settings:update")||!(rt.auto_archive!==k.auto_archive||rt.save_thumbnails!==k.save_thumbnails||rt.capture_finish_photo!==k.capture_finish_photo||rt.default_filament_cost!==k.default_filament_cost||rt.currency!==k.currency||rt.energy_cost_per_kwh!==k.energy_cost_per_kwh||rt.energy_tracking_mode!==k.energy_tracking_mode||rt.check_updates!==k.check_updates||(rt.check_printer_firmware??!0)!==(k.check_printer_firmware??!0)||(rt.include_beta_updates??!1)!==(k.include_beta_updates??!1)||rt.notification_language!==k.notification_language||(rt.bed_cooled_threshold??35)!==(k.bed_cooled_threshold??35)||rt.ams_humidity_good!==k.ams_humidity_good||rt.ams_humidity_fair!==k.ams_humidity_fair||rt.ams_temp_good!==k.ams_temp_good||rt.ams_temp_fair!==k.ams_temp_fair||rt.ams_history_retention_days!==k.ams_history_retention_days||rt.disable_filament_warnings!==k.disable_filament_warnings||rt.prefer_lowest_filament!==k.prefer_lowest_filament||(rt.queue_drying_enabled??!1)!==(k.queue_drying_enabled??!1)||(rt.queue_drying_block??!1)!==(k.queue_drying_block??!1)||(rt.ambient_drying_enabled??!1)!==(k.ambient_drying_enabled??!1)||(rt.drying_presets??"")!==(k.drying_presets??"")||rt.per_printer_mapping_expanded!==k.per_printer_mapping_expanded||rt.date_format!==k.date_format||rt.time_format!==k.time_format||rt.default_printer_id!==k.default_printer_id||rt.ftp_retry_enabled!==k.ftp_retry_enabled||rt.ftp_retry_count!==k.ftp_retry_count||rt.ftp_retry_delay!==k.ftp_retry_delay||rt.ftp_timeout!==k.ftp_timeout||rt.mqtt_enabled!==k.mqtt_enabled||rt.mqtt_broker!==k.mqtt_broker||rt.mqtt_port!==k.mqtt_port||rt.mqtt_username!==k.mqtt_username||rt.mqtt_password!==k.mqtt_password||rt.mqtt_topic_prefix!==k.mqtt_topic_prefix||rt.mqtt_use_tls!==k.mqtt_use_tls||rt.external_url!==k.external_url||rt.ha_enabled!==k.ha_enabled||rt.ha_url!==k.ha_url||rt.ha_token!==k.ha_token||(rt.library_archive_mode??"ask")!==(k.library_archive_mode??"ask")||Number(rt.library_disk_warning_gb??5)!==Number(k.library_disk_warning_gb??5)||(rt.camera_view_mode??"window")!==(k.camera_view_mode??"window")||(rt.preferred_slicer??"bambu_studio")!==(k.preferred_slicer??"bambu_studio")||(rt.use_slicer_api??!1)!==(k.use_slicer_api??!1)||(rt.orcaslicer_api_url??"")!==(k.orcaslicer_api_url??"")||(rt.bambu_studio_api_url??"")!==(k.bambu_studio_api_url??"")||rt.prometheus_enabled!==k.prometheus_enabled||rt.prometheus_token!==k.prometheus_token||(rt.user_notifications_enabled??!0)!==(k.user_notifications_enabled??!0)||(rt.default_bed_levelling??!0)!==(k.default_bed_levelling??!0)||(rt.default_flow_cali??!1)!==(k.default_flow_cali??!1)||(rt.default_vibration_cali??!0)!==(k.default_vibration_cali??!0)||(rt.default_layer_inspect??!1)!==(k.default_layer_inspect??!1)||(rt.default_timelapse??!1)!==(k.default_timelapse??!1)||(rt.stagger_group_size??2)!==(k.stagger_group_size??2)||(rt.stagger_interval_minutes??5)!==(k.stagger_interval_minutes??5)||(rt.require_plate_clear??!1)!==(k.require_plate_clear??!1)))&&!Nl.current)return su.current&&clearTimeout(su.current),su.current=setTimeout(()=>{if(Nl.current)return;Nl.current=!0;const Et={auto_archive:k.auto_archive,save_thumbnails:k.save_thumbnails,capture_finish_photo:k.capture_finish_photo,default_filament_cost:k.default_filament_cost,currency:k.currency,energy_cost_per_kwh:k.energy_cost_per_kwh,energy_tracking_mode:k.energy_tracking_mode,check_updates:k.check_updates,check_printer_firmware:k.check_printer_firmware,include_beta_updates:k.include_beta_updates,notification_language:k.notification_language,bed_cooled_threshold:k.bed_cooled_threshold,ams_humidity_good:k.ams_humidity_good,ams_humidity_fair:k.ams_humidity_fair,ams_temp_good:k.ams_temp_good,ams_temp_fair:k.ams_temp_fair,ams_history_retention_days:k.ams_history_retention_days,disable_filament_warnings:k.disable_filament_warnings,prefer_lowest_filament:k.prefer_lowest_filament,queue_drying_enabled:k.queue_drying_enabled,queue_drying_block:k.queue_drying_block,ambient_drying_enabled:k.ambient_drying_enabled,drying_presets:k.drying_presets,per_printer_mapping_expanded:k.per_printer_mapping_expanded,date_format:k.date_format,time_format:k.time_format,default_printer_id:k.default_printer_id,ftp_retry_enabled:k.ftp_retry_enabled,ftp_retry_count:k.ftp_retry_count,ftp_retry_delay:k.ftp_retry_delay,ftp_timeout:k.ftp_timeout,mqtt_enabled:k.mqtt_enabled,mqtt_broker:k.mqtt_broker,mqtt_port:k.mqtt_port,mqtt_username:k.mqtt_username,mqtt_password:k.mqtt_password,mqtt_topic_prefix:k.mqtt_topic_prefix,mqtt_use_tls:k.mqtt_use_tls,external_url:k.external_url,ha_enabled:k.ha_enabled,ha_url:k.ha_url,ha_token:k.ha_token,library_archive_mode:k.library_archive_mode,library_disk_warning_gb:k.library_disk_warning_gb,camera_view_mode:k.camera_view_mode,preferred_slicer:k.preferred_slicer,use_slicer_api:k.use_slicer_api,orcaslicer_api_url:k.orcaslicer_api_url,bambu_studio_api_url:k.bambu_studio_api_url,prometheus_enabled:k.prometheus_enabled,prometheus_token:k.prometheus_token,user_notifications_enabled:k.user_notifications_enabled,default_bed_levelling:k.default_bed_levelling,default_flow_cali:k.default_flow_cali,default_vibration_cali:k.default_vibration_cali,default_layer_inspect:k.default_layer_inspect,default_timelapse:k.default_timelapse,stagger_group_size:k.stagger_group_size,stagger_interval_minutes:k.stagger_interval_minutes,require_plate_clear:k.require_plate_clear};Um.mutate(Et)},500),()=>{su.current&&clearTimeout(su.current)}},[k,rt,Um,l,m,o,i]);const hn=w.useCallback((_e,Et)=>{if(l&&!m("settings:update")){o(i("settings.toast.noPermissionUpdate"),"error");return}E(Fn=>Fn?{...Fn,[_e]:Et}:null)},[l,m,o,i]),Bm=async(_e,Et,Fn)=>{if(!Et){o(i("settings.toast.enterCameraUrl"),"error");return}We(kn=>({...kn,[_e]:!0})),dt(kn=>({...kn,[_e]:null}));try{const kn=await oe.testExternalCamera(_e,Et,Fn);dt(it=>({...it,[_e]:kn})),kn.success?o(i("settings.toast.cameraConnected",{resolution:kn.resolution||""}),"success"):o(kn.error||i("settings.toast.connectionFailed"),"error")}catch(kn){const it=kn instanceof Error?kn.message:i("settings.toast.testFailed");dt(Dt=>({...Dt,[_e]:{success:!1,error:it}})),o(it,"error")}finally{We(kn=>({...kn,[_e]:!1}))}},[Hm,eb]=w.useState({}),Wp=w.useRef({}),Go=w.useRef(new Set);w.useEffect(()=>{if(On){const _e={};On.forEach(Et=>{Et.external_camera_url&&!Go.current.has(Et.id)&&(_e[Et.id]=Et.external_camera_url,Go.current.add(Et.id))}),Object.keys(_e).length>0&&eb(Et=>({...Et,..._e}))}},[On]);const Wo=(_e,Et)=>{eb(Fn=>({...Fn,[_e]:Et})),Wp.current[_e]&&clearTimeout(Wp.current[_e]),Wp.current[_e]=setTimeout(()=>{Zg.mutate({id:_e,data:{external_camera_url:Et||null}})},800)},Sc=(_e,Et)=>{const Fn={};Et.type!==void 0&&(Fn.external_camera_type=Et.type||null),Et.enabled!==void 0&&(Fn.external_camera_enabled=Et.enabled),Et.rotation!==void 0&&(Fn.camera_rotation=Et.rotation),Zg.mutate({id:_e,data:Fn})};if(Ct||!k)return a.jsx("div",{className:"p-4 md:p-8 flex justify-center",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})});const Xy=Trt().map(_e=>({..._e,label:i(_e.labelKey,_e.labelFallback??_e.labelKey)})),qm=pe.trim().toLowerCase(),Kp=qm?Xy.filter(_e=>_e.label.toLowerCase().includes(qm)||_e.keywords.toLowerCase().includes(qm)).slice(0,8):[],$m=_e=>{q(_e.tab),_e.subTab&&G(_e.subTab),be(""),setTimeout(()=>{const Et=document.getElementById(_e.anchor);Et&&(Et.scrollIntoView({behavior:"smooth",block:"start"}),Et.classList.add("ring-2","ring-bambu-green"),setTimeout(()=>Et.classList.remove("ring-2","ring-bambu-green"),1500))},50)};return a.jsx(Vye,{density:"dense",children:a.jsxs("div",{className:"p-4 md:p-6",children:[a.jsxs("div",{className:"mb-4 flex flex-col sm:flex-row sm:items-center sm:justify-between gap-3",children:[a.jsxs("div",{className:"flex items-baseline gap-3",children:[a.jsx("h1",{className:"text-2xl font-bold text-white",children:i("settings.title")}),a.jsx("p",{className:"text-sm text-bambu-gray hidden md:block",children:i("settings.configureBambuddy")})]}),a.jsxs("div",{className:"relative sm:w-72",children:[a.jsx(Nr,{className:"w-4 h-4 text-bambu-gray absolute left-3 top-1/2 -translate-y-1/2 pointer-events-none"}),a.jsx("input",{type:"text",value:pe,onChange:_e=>be(_e.target.value),placeholder:i("settings.searchPlaceholder","Search settings…"),className:"w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green"}),pe&&a.jsx("button",{onClick:()=>be(""),className:"absolute right-2 top-1/2 -translate-y-1/2 p-1 text-bambu-gray hover:text-white","aria-label":"Clear",children:a.jsx(Bt,{className:"w-3.5 h-3.5"})}),Kp.length>0&&a.jsx("div",{className:"absolute top-full left-0 right-0 mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-30 overflow-hidden",children:Kp.map(_e=>a.jsxs("button",{onClick:()=>$m(_e),className:"w-full px-3 py-2 text-left hover:bg-bambu-dark-tertiary transition-colors border-b border-bambu-dark-tertiary last:border-b-0",children:[a.jsx("p",{className:"text-sm text-white",children:_e.label}),a.jsxs("p",{className:"text-xs text-bambu-gray",children:[i(`settings.tabs.${_e.tab==="virtual-printer"?"virtualPrinter":_e.tab==="failure-detection"?"failureDetection":_e.tab}`),_e.subTab?` › ${i(`settings.tabs.${_e.subTab}`,_e.subTab)}`:""]})]},_e.anchor))}),qm&&Kp.length===0&&a.jsx("div",{className:"absolute top-full left-0 right-0 mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-30 p-3",children:a.jsx("p",{className:"text-xs text-bambu-gray italic",children:i("settings.noSearchResults","No matching settings.")})})]})]}),a.jsxs("div",{className:"flex flex-col lg:flex-row gap-4 lg:gap-6",children:[a.jsxs("nav",{className:"flex flex-wrap gap-1 border-b border-bambu-dark-tertiary lg:flex-col lg:flex-nowrap lg:gap-0 lg:border-b-0 lg:border-r lg:w-48 lg:flex-shrink-0 lg:self-start lg:sticky lg:top-4",children:[a.jsxs("button",{onClick:()=>q("general"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="general"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(mS,{className:"w-4 h-4"}),i("settings.tabs.general")]}),a.jsxs("button",{onClick:()=>q("plugs"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="plugs"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(tc,{className:"w-4 h-4"}),i("settings.tabs.smartPlugs"),Ke&&Ke.length>0&&a.jsx("span",{className:"text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full",children:Ke.length})]}),a.jsxs("button",{onClick:()=>q("notifications"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="notifications"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(ap,{className:"w-4 h-4"}),i("settings.tabs.notifications"),wn&&wn.length>0&&a.jsx("span",{className:"text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full",children:wn.length})]}),a.jsxs("button",{onClick:()=>q("queue"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="queue"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(jN,{className:"w-4 h-4"}),i("settings.tabs.queue","Workflow")]}),a.jsxs("button",{onClick:()=>q("filament"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="filament"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(cge,{className:"w-4 h-4"}),i("settings.tabs.filament")]}),a.jsxs("button",{onClick:()=>q("network"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="network"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(cp,{className:"w-4 h-4"}),i("settings.tabs.network"),a.jsx("span",{className:`w-2 h-2 rounded-full ${zi?.enabled?"bg-green-400":"bg-gray-500"}`})]}),a.jsxs("button",{onClick:()=>q("apikeys"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="apikeys"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(ao,{className:"w-4 h-4"}),i("settings.tabs.apiKeys"),_n&&_n.length>0&&a.jsx("span",{className:"text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full",children:_n.length})]}),a.jsxs("button",{onClick:()=>q("virtual-printer"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="virtual-printer"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(Mr,{className:"w-4 h-4"}),i("settings.tabs.virtualPrinter"),a.jsx("span",{className:`w-2 h-2 rounded-full ${Kr?"bg-green-400":"bg-gray-500"}`})]}),a.jsxs("button",{onClick:()=>q("spoolbuddy"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="spoolbuddy"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(dJ,{className:"w-4 h-4"}),i("settings.tabs.spoolbuddy"),Hr>0&&a.jsx("span",{className:"text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full",children:Hr}),a.jsx("span",{className:`w-2 h-2 rounded-full ${or?"bg-green-400":"bg-gray-500"}`})]}),a.jsxs("button",{onClick:()=>q("failure-detection"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="failure-detection"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(uJ,{className:"w-4 h-4"}),i("settings.tabs.failureDetection"),a.jsx("span",{className:`w-2 h-2 rounded-full ${Oi?"bg-green-400":"bg-gray-500"}`})]}),a.jsxs("button",{onClick:()=>q("users"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="users"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(Ku,{className:"w-4 h-4"}),i("settings.tabs.users"),l&&a.jsx("span",{className:"w-2 h-2 rounded-full bg-green-400"})]}),a.jsxs("button",{onClick:()=>q("backup"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="backup"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(Jl,{className:"w-4 h-4"}),i("settings.tabs.backup"),a.jsx("span",{className:`w-2 h-2 rounded-full ${wo?.is_authenticated&&wl?.configured&&wl?.enabled?"bg-green-400":"bg-gray-500"}`})]})]}),a.jsxs("div",{className:"flex-1 min-w-0",children:[O==="general"&&a.jsxs("div",{className:"flex flex-col lg:flex-row gap-4 lg:gap-6",children:[a.jsxs("div",{className:"space-y-3 flex-1 lg:max-w-xl",children:[a.jsxs(wt,{id:"card-general",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.general")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[a.jsx(qs,{className:"w-4 h-4 inline mr-1"}),i("settings.language")]}),a.jsxs("div",{className:"relative",children:[a.jsx("select",{value:s.language,onChange:_e=>{const Et=_e.target.value;if(l&&!m("settings:update")){o(i("settings.toast.noPermissionUpdate"),"error");return}s.changeLanguage(Et),Um.mutate({language:Et})},className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:CH.map(_e=>a.jsxs("option",{value:_e.code,children:[_e.nativeName," (",_e.name,")"]},_e.code))}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.languageDescription")})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.defaultView")}),a.jsxs("div",{className:"relative",children:[a.jsx("select",{value:Y,onChange:_e=>tt(_e.target.value),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:Zu.map(_e=>a.jsx("option",{value:_e.to,children:i(_e.labelKey)},_e.id))}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.defaultViewDescription")})]}),a.jsxs("div",{className:"grid grid-cols-2 gap-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.dateFormat")}),a.jsxs("div",{className:"relative",children:[a.jsxs("select",{value:k.date_format||"system",onChange:_e=>hn("date_format",_e.target.value),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[a.jsx("option",{value:"system",children:i("settings.systemDefault")}),a.jsx("option",{value:"us",children:i("settings.dateFormatUs")}),a.jsx("option",{value:"eu",children:i("settings.dateFormatEu")}),a.jsx("option",{value:"iso",children:i("settings.dateFormatIso")})]}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.timeFormat")}),a.jsxs("div",{className:"relative",children:[a.jsxs("select",{value:k.time_format||"system",onChange:_e=>hn("time_format",_e.target.value),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[a.jsx("option",{value:"system",children:i("settings.systemDefault")}),a.jsx("option",{value:"12h",children:i("settings.timeFormat12")}),a.jsx("option",{value:"24h",children:i("settings.timeFormat24")})]}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.defaultPrinter")}),a.jsxs("div",{className:"relative",children:[a.jsxs("select",{value:k.default_printer_id??"",onChange:_e=>hn("default_printer_id",_e.target.value?Number(_e.target.value):null),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[a.jsx("option",{value:"",children:i("settings.noDefaultPrinter")}),On?.map(_e=>a.jsx("option",{value:_e.id,children:_e.name},_e.id))]}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.defaultPrinterDescription")})]}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.sidebarOrder")}),a.jsxs("p",{className:"text-sm text-bambu-gray",children:[i("settings.sidebarOrderDescription"),l&&m("settings:update")&&` ${i("settings.sidebarOrderSetDefaultHint")}`]})]}),a.jsxs("div",{className:"flex items-center gap-2 shrink-0",children:[a.jsxs(De,{variant:"secondary",size:"sm",onClick:nt,children:[a.jsx(Ts,{className:"w-4 h-4"}),i("settings.reset")]}),l&&m("settings:update")&&a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("span",{className:"text-sm text-bambu-gray whitespace-nowrap",children:i("settings.setDefault")}),a.jsx(Ln,{checked:Je,onChange:Ue,disabled:Ct})]})]})]})]})]}),a.jsxs(wt,{id:"card-appearance",children:[a.jsx(pn,{children:a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(lS,{className:"w-5 h-5"}),i("settings.appearance")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{className:`space-y-3 p-4 rounded-lg border ${p==="dark"?"border-bambu-green bg-bambu-green/5":"border-bambu-dark-tertiary"}`,children:[a.jsxs("h3",{className:"text-sm font-medium text-white flex items-center gap-2",children:[i("settings.darkMode"),p==="dark"&&a.jsx("span",{className:"text-xs text-bambu-green",children:i("settings.active")})]}),a.jsxs("div",{className:"grid grid-cols-3 gap-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.background")}),a.jsxs("select",{value:x,onChange:_e=>{P(_e.target.value),o(i("settings.toast.settingsSaved"),"success")},className:"w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"neutral",children:i("settings.bgNeutral")}),a.jsx("option",{value:"warm",children:i("settings.bgWarm")}),a.jsx("option",{value:"cool",children:i("settings.bgCool")}),a.jsx("option",{value:"oled",children:i("settings.bgOled")}),a.jsx("option",{value:"slate",children:i("settings.bgSlate")}),a.jsx("option",{value:"forest",children:i("settings.bgForest")})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.accent")}),a.jsxs("select",{value:v,onChange:_e=>{C(_e.target.value),o(i("settings.toast.settingsSaved"),"success")},className:"w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"green",children:i("settings.accentGreen")}),a.jsx("option",{value:"teal",children:i("settings.accentTeal")}),a.jsx("option",{value:"blue",children:i("settings.accentBlue")}),a.jsx("option",{value:"orange",children:i("settings.accentOrange")}),a.jsx("option",{value:"purple",children:i("settings.accentPurple")}),a.jsx("option",{value:"red",children:i("settings.accentRed")})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.style")}),a.jsxs("select",{value:f,onChange:_e=>{N(_e.target.value),o(i("settings.toast.settingsSaved"),"success")},className:"w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"classic",children:i("settings.styleClassic")}),a.jsx("option",{value:"glow",children:i("settings.styleGlow")}),a.jsx("option",{value:"vibrant",children:i("settings.styleVibrant")})]})]})]})]}),a.jsxs("div",{className:`space-y-3 p-4 rounded-lg border ${p==="light"?"border-bambu-green bg-bambu-green/5":"border-bambu-dark-tertiary"}`,children:[a.jsxs("h3",{className:"text-sm font-medium text-white flex items-center gap-2",children:[i("settings.lightMode"),p==="light"&&a.jsx("span",{className:"text-xs text-bambu-green",children:i("settings.active")})]}),a.jsxs("div",{className:"grid grid-cols-3 gap-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.background")}),a.jsxs("select",{value:g,onChange:_e=>{T(_e.target.value),o(i("settings.toast.settingsSaved"),"success")},className:"w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"neutral",children:i("settings.bgNeutral")}),a.jsx("option",{value:"warm",children:i("settings.bgWarm")}),a.jsx("option",{value:"cool",children:i("settings.bgCool")})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.accent")}),a.jsxs("select",{value:S,onChange:_e=>{F(_e.target.value),o(i("settings.toast.settingsSaved"),"success")},className:"w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"green",children:i("settings.accentGreen")}),a.jsx("option",{value:"teal",children:i("settings.accentTeal")}),a.jsx("option",{value:"blue",children:i("settings.accentBlue")}),a.jsx("option",{value:"orange",children:i("settings.accentOrange")}),a.jsx("option",{value:"purple",children:i("settings.accentPurple")}),a.jsx("option",{value:"red",children:i("settings.accentRed")})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.style")}),a.jsxs("select",{value:b,onChange:_e=>{A(_e.target.value),o(i("settings.toast.settingsSaved"),"success")},className:"w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"classic",children:i("settings.styleClassic")}),a.jsx("option",{value:"glow",children:i("settings.styleGlow")}),a.jsx("option",{value:"vibrant",children:i("settings.styleVibrant")})]})]})]})]}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.themeToggleHint")})]})]}),a.jsxs(wt,{id:"card-archive",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.archiveSettings")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.autoArchivePrints")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.autoArchiveDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.auto_archive,onChange:_e=>hn("auto_archive",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.saveThumbnails")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.saveThumbnailsDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.save_thumbnails,onChange:_e=>hn("save_thumbnails",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.captureFinishPhoto")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.captureFinishPhotoDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.capture_finish_photo,onChange:_e=>hn("capture_finish_photo",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),k.capture_finish_photo&&yc&&!yc.installed&&a.jsxs("div",{className:"flex items-start gap-2 p-3 bg-yellow-500/10 border border-yellow-500/30 rounded-lg",children:[a.jsx(Cn,{className:"w-5 h-5 text-yellow-500 flex-shrink-0 mt-0.5"}),a.jsxs("div",{className:"text-sm",children:[a.jsx("p",{className:"text-yellow-500 font-medium",children:i("settings.ffmpegNotInstalled")}),a.jsx("p",{className:"text-bambu-gray mt-1",children:i("settings.ffmpegRequired")})]})]}),Ms&&vo&&a.jsxs("div",{className:"border-t border-bambu-dark-tertiary pt-3 mt-3 space-y-3",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("archiveAutoPurge.enableLabel")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("archiveAutoPurge.enableDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:vo.enabled,onChange:_e=>vl({enabled:_e.target.checked}),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("archiveAutoPurge.ageLabel")}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",min:7,max:3650,disabled:!vo.enabled,value:vo.days,onChange:_e=>vl({days:Math.max(7,Math.min(3650,parseInt(_e.target.value||"0",10)||0))}),className:"w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none disabled:opacity-50"}),a.jsx("span",{className:"text-bambu-gray",children:i("archiveAutoPurge.days")})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("archiveAutoPurge.ageDescription")})]})]})]})]})]}),a.jsxs("div",{className:"space-y-3 flex-1 lg:max-w-md",children:[a.jsxs(wt,{id:"card-camera",children:[a.jsx(pn,{children:a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(FN,{className:"w-5 h-5 text-bambu-green"}),i("settings.camera")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.cameraViewMode")}),a.jsxs("select",{value:k.camera_view_mode??"window",onChange:_e=>hn("camera_view_mode",_e.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"window",children:i("settings.newWindow")}),a.jsx("option",{value:"embedded",children:i("settings.embeddedOverlay")})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:k.camera_view_mode==="embedded"?i("settings.cameraOverlayDescription"):i("settings.cameraWindowDescription")})]}),a.jsxs("div",{className:"border-t border-bambu-dark-tertiary pt-4 mt-4",children:[a.jsx("h3",{className:"text-sm font-medium text-white mb-2",children:i("settings.externalCameras")}),a.jsx("p",{className:"text-xs text-bambu-gray mb-3",children:i("settings.externalCamerasDescription")}),On&&On.length>0?a.jsx("div",{className:"space-y-3",children:On.map(_e=>a.jsxs("div",{className:"p-3 bg-bambu-dark rounded-lg",children:[a.jsxs("div",{className:"flex items-center justify-between mb-2",children:[a.jsx("span",{className:"text-white font-medium text-sm",children:_e.name}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:_e.external_camera_enabled,onChange:Et=>Sc(_e.id,{enabled:Et.target.checked}),className:"sr-only peer"}),a.jsx("div",{className:"w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:border-gray-300 after:border after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green"})]})]}),_e.external_camera_enabled&&a.jsxs("div",{className:"space-y-2 mt-2",children:[a.jsx("input",{type:"text",placeholder:_e.external_camera_type==="usb"?i("settings.cameraPlaceholderUsb"):i("settings.cameraPlaceholderUrl"),value:Hm[_e.id]??_e.external_camera_url??"",onChange:Et=>Wo(_e.id,Et.target.value),className:"w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none"}),a.jsxs("div",{className:"flex gap-2",children:[a.jsxs("select",{value:_e.external_camera_type||"mjpeg",onChange:Et=>Sc(_e.id,{type:Et.target.value}),className:"flex-1 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"mjpeg",children:i("settings.cameraTypeMjpeg")}),a.jsx("option",{value:"rtsp",children:i("settings.cameraTypeRtsp")}),a.jsx("option",{value:"snapshot",children:i("settings.cameraTypeSnapshot")}),a.jsx("option",{value:"usb",children:i("settings.cameraTypeUsb")})]}),a.jsx(De,{size:"sm",variant:"secondary",onClick:()=>Bm(_e.id,Hm[_e.id]??_e.external_camera_url??"",_e.external_camera_type||"mjpeg"),disabled:Ae[_e.id]||!(Hm[_e.id]??_e.external_camera_url),children:Ae[_e.id]?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):i("settings.test")})]}),Le[_e.id]&&a.jsx("div",{className:`text-xs flex items-center gap-1 ${Le[_e.id]?.success?"text-green-500":"text-red-500"}`,children:Le[_e.id]?.success?a.jsxs(a.Fragment,{children:[a.jsx(wr,{className:"w-3 h-3"}),i("settings.connected"),Le[_e.id]?.resolution&&` (${Le[_e.id]?.resolution})`]}):a.jsxs(a.Fragment,{children:[a.jsx(Da,{className:"w-3 h-3"}),Le[_e.id]?.error||i("settings.toast.connectionFailed")]})}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("label",{className:"text-xs text-bambu-gray",children:i("settings.cameraRotation")}),a.jsxs("select",{value:_e.camera_rotation||0,onChange:Et=>Sc(_e.id,{rotation:parseInt(Et.target.value)}),className:"px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-xs focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:0,children:"0°"}),a.jsx("option",{value:90,children:"90°"}),a.jsx("option",{value:180,children:"180°"}),a.jsx("option",{value:270,children:"270°"})]})]})]})]},_e.id))}):a.jsx("p",{className:"text-xs text-bambu-gray italic",children:i("settings.noPrintersConfigured")})]})]})]}),a.jsxs(wt,{id:"card-cost",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.costTracking")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.currency")}),a.jsx("select",{value:k.currency,onChange:_e=>hn("currency",_e.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:$7e.map(_e=>a.jsx("option",{value:_e.code,children:_e.label},_e.code))})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.defaultFilamentCost")}),a.jsxs("div",{className:"relative",children:[a.jsx("span",{className:"absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray text-sm pointer-events-none",children:Mo(k.currency)}),a.jsx("input",{type:"number",step:"0.01",min:"0",value:k.default_filament_cost,onChange:_e=>hn("default_filament_cost",parseFloat(_e.target.value)||0),style:{paddingLeft:`${Math.max(2,Mo(k.currency).length*.6+1)}rem`},className:"w-full pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.electricityCost")}),a.jsxs("div",{className:"relative",children:[a.jsx("span",{className:"absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray text-sm pointer-events-none",children:Mo(k.currency)}),a.jsx("input",{type:"number",step:"0.001",min:"0",value:k.energy_cost_per_kwh,onChange:_e=>hn("energy_cost_per_kwh",parseFloat(_e.target.value)||0),style:{paddingLeft:`${Math.max(2,Mo(k.currency).length*.6+1)}rem`},className:"w-full pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.energyDisplayMode")}),a.jsxs("select",{value:k.energy_tracking_mode||"total",onChange:_e=>hn("energy_tracking_mode",_e.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"print",children:i("settings.printsOnly")}),a.jsx("option",{value:"total",children:i("settings.totalConsumption")})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:k.energy_tracking_mode==="print"?i("settings.energyModePrintDescription"):i("settings.energyModeTotalDescription")})]})]})]}),a.jsxs(wt,{id:"card-filemanager",children:[a.jsx(pn,{children:a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(Ns,{className:"w-5 h-5 text-bambu-green"}),i("settings.fileManager")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.createArchiveEntry")}),a.jsxs("select",{value:k.library_archive_mode??"ask",onChange:_e=>hn("library_archive_mode",_e.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"always",children:i("settings.archiveMode.always")}),a.jsx("option",{value:"never",children:i("settings.archiveMode.never")}),a.jsx("option",{value:"ask",children:i("settings.archiveMode.ask")})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.createArchiveEntryDescription")})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.lowDiskSpaceWarning")}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",min:"0.5",max:"100",step:"0.5",value:k.library_disk_warning_gb??5,onChange:_e=>hn("library_disk_warning_gb",parseFloat(_e.target.value)||5),className:"w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("span",{className:"text-bambu-gray",children:"GB"})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.lowDiskSpaceDescription")})]}),Pt&&Dn&&a.jsxs("div",{className:"border-t border-bambu-dark-tertiary pt-3 mt-3 space-y-3",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("libraryAutoPurge.enableLabel")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("libraryAutoPurge.enableDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:Dn.auto_purge_enabled,onChange:_e=>Wt({auto_purge_enabled:_e.target.checked}),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("libraryAutoPurge.ageLabel")}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",min:7,max:3650,disabled:!Dn.auto_purge_enabled,value:Dn.auto_purge_days,onChange:_e=>Wt({auto_purge_days:Math.max(7,Math.min(3650,parseInt(_e.target.value||"0",10)||0))}),className:"w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none disabled:opacity-50"}),a.jsx("span",{className:"text-bambu-gray",children:i("libraryAutoPurge.days")})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("libraryAutoPurge.ageDescription")})]}),a.jsxs("label",{className:"flex items-center gap-2 text-sm text-white cursor-pointer",children:[a.jsx("input",{type:"checkbox",disabled:!Dn.auto_purge_enabled,checked:Dn.auto_purge_include_never_printed,onChange:_e=>Wt({auto_purge_include_never_printed:_e.target.checked}),className:"rounded border-gray-300 disabled:opacity-50"}),i("libraryAutoPurge.includeNeverPrinted")]})]})]})]})]}),a.jsxs("div",{className:"space-y-3 flex-1 lg:max-w-sm",children:[a.jsx(ort,{}),a.jsxs(wt,{id:"card-updates",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.updates")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-xs font-medium text-bambu-gray uppercase tracking-wider",children:i("settings.printerFirmware")}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.checkPrinterFirmware")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.checkFirmwareDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.check_printer_firmware??!0,onChange:_e=>hn("check_printer_firmware",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsx("div",{className:"border-t border-bambu-dark-tertiary pt-4",children:a.jsx("p",{className:"text-xs font-medium text-bambu-gray uppercase tracking-wider mb-4",children:i("settings.bambuddySoftware")})}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.checkForUpdatesLabel")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.autoCheckDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.check_updates,onChange:_e=>hn("check_updates",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{className:`flex items-center justify-between ${k.check_updates?"":"opacity-50"}`,children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.includeBetaUpdates")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.includeBetaUpdatesDesc")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.include_beta_updates??!1,onChange:_e=>hn("include_beta_updates",_e.target.checked),disabled:!k.check_updates,className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{children:[a.jsxs("div",{className:"flex items-center justify-between mb-2",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.currentVersion")}),a.jsxs("p",{className:"text-sm text-bambu-gray",children:["v",yl?.version||"..."]})]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>nd(),disabled:$p,children:[$p?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(sr,{className:"w-4 h-4"}),i("settings.checkNow")]})]}),Ir?.update_available?a.jsxs("div",{className:"mt-4 p-3 bg-bambu-green/10 border border-bambu-green/30 rounded-lg",children:[a.jsxs("div",{className:"flex items-start justify-between",children:[a.jsxs("div",{children:[a.jsxs("p",{className:"text-bambu-green font-medium",children:["Update available: v",Ir.latest_version]}),Ir.release_name&&Ir.release_name!==Ir.latest_version&&a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:Ir.release_name})]}),a.jsxs("div",{className:"flex items-center gap-2",children:[Ir.release_notes&&a.jsx("button",{onClick:()=>Oe(!0),className:"text-bambu-gray hover:text-white transition-colors text-sm underline",children:i("settings.releaseNotes")}),Ir.release_url&&a.jsx("a",{href:Ir.release_url,target:"_blank",rel:"noopener noreferrer",className:"text-bambu-gray hover:text-white transition-colors",title:i("settings.viewReleaseOnGitHub"),children:a.jsx(Ar,{className:"w-4 h-4"})})]})]}),ls?.status==="downloading"||ls?.status==="installing"?a.jsxs("div",{className:"mt-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-sm text-bambu-gray",children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),a.jsx("span",{children:ls.message})]}),a.jsx("div",{className:"mt-2 w-full bg-bambu-dark-tertiary rounded-full h-2",children:a.jsx("div",{className:"bg-bambu-green h-2 rounded-full transition-all duration-300",style:{width:`${ls.progress}%`}})})]}):ls?.status==="complete"?a.jsx("div",{className:"mt-3 p-2 bg-bambu-green/20 rounded text-sm text-bambu-green",children:ls.message}):ls?.status==="error"?a.jsx("div",{className:"mt-3 p-2 bg-red-500/20 rounded text-sm text-red-400",children:ls.error||ls.message}):Ir?.is_docker?a.jsxs("div",{className:"mt-3 p-3 bg-bambu-dark-tertiary rounded-lg",children:[a.jsx("p",{className:"text-sm text-bambu-gray mb-2",children:i("settings.updateViaDocker")}),a.jsx("code",{className:"block text-xs bg-bambu-dark p-2 rounded text-bambu-green font-mono",children:"docker compose pull && docker compose up -d"})]}):a.jsxs(De,{className:"mt-3",onClick:()=>au.mutate(),disabled:au.isPending,children:[au.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(aa,{className:"w-4 h-4"}),i("settings.installUpdate")]})]}):Ir?.error?a.jsx("div",{className:"mt-2 p-2 bg-red-500/10 border border-red-500/30 rounded text-sm text-red-400",children:i("settings.failedToCheckUpdates",{error:Ir.error})}):Ir&&!Ir.update_available?a.jsx("p",{className:"mt-2 text-sm text-bambu-gray",children:i("settings.latestVersionRunning")}):null]})]})]}),a.jsxs(wt,{id:"card-data",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.dataManagement")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.clearNotificationLogs")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.clearNotificationLogsDescription")})]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>xe(!0),children:[a.jsx(Zt,{className:"w-4 h-4"}),i("common.clear")]})]}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.resetUiPreferences")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.resetUiPreferencesDescription")})]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>Be(!0),children:[a.jsx(Zt,{className:"w-4 h-4"}),i("settings.reset")]})]}),a.jsxs("div",{className:"pt-4 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.storageUsage","Storage Usage")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.storageUsageDescription","Breakdown of data usage by category")})]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:Ft,disabled:Lt||Se,children:[a.jsx(sr,{className:`w-4 h-4 ${Lt||Se?"animate-spin":""}`}),i("common.refresh","Refresh")]})]}),a.jsx("div",{className:"mt-3",children:Ot?a.jsxs("div",{className:"flex items-center gap-2 text-sm text-bambu-gray",children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),i("common.loading","Loading")]}):bt?a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"w-full h-3 bg-bambu-dark rounded-full overflow-hidden flex",children:bt.categories.filter(_e=>_e.bytes>0).map((_e,Et)=>a.jsx("div",{className:`${VY(_e.key,Et)} h-full`,style:{width:`${_e.percent_of_total}%`},title:`${_e.label}: ${_e.formatted}`},_e.key))}),a.jsx("div",{className:"mt-3 flex flex-wrap gap-3",children:bt.categories.filter(_e=>_e.bytes>0).map((_e,Et)=>a.jsxs("div",{className:"flex items-center gap-2 text-xs",children:[a.jsx("span",{className:`w-3 h-3 rounded-full ${VY(_e.key,Et)}`}),a.jsx("span",{className:"text-bambu-gray",children:_e.label}),a.jsx("span",{className:"text-white",children:_e.formatted}),a.jsxs("span",{className:"text-bambu-gray",children:["(",_e.percent_of_total.toFixed(1),"%)"]})]},_e.key))}),a.jsxs("div",{className:"mt-2 text-xs text-bambu-gray",children:[i("settings.storageUsageTotal","Total"),": ",a.jsx("span",{className:"text-white",children:bt.total_formatted}),bt.scan_errors>0&&a.jsxs("span",{className:"ml-2 text-amber-400",children:[i("settings.storageUsageErrors","Scan errors"),": ",bt.scan_errors]})]}),bt.other_breakdown?.length>0&&a.jsxs("div",{className:"mt-4",children:[a.jsx("p",{className:"text-xs text-bambu-gray mb-2",children:i("settings.storageUsageOtherBreakdown","Other breakdown")}),a.jsx("div",{className:"space-y-2",children:bt.other_breakdown.map(_e=>a.jsxs("div",{className:"flex items-center justify-between text-xs",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("span",{className:"text-white",children:_e.label}),a.jsx("span",{className:`px-2 py-0.5 rounded-full border ${_e.kind==="system"?"border-slate-500 text-slate-300":"border-bambu-green text-bambu-green"}`,children:_e.kind==="system"?i("settings.storageUsageSystem","System"):i("settings.storageUsageData","Data")})]}),a.jsxs("div",{className:"flex items-center gap-2 text-bambu-gray",children:[a.jsx("span",{className:"text-white",children:_e.formatted}),a.jsxs("span",{children:["(",_e.percent_of_total.toFixed(1),"%)"]})]})]},`${_e.bucket}-${_e.kind}`))})]})]}):a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.storageUsageUnavailable","Storage usage data is unavailable")})})]}),a.jsxs("div",{className:"flex items-center justify-between pt-4 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.backupRestore")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.backupRestoreDescription")})]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>q("backup"),children:[a.jsx(Jl,{className:"w-4 h-4"}),i("settings.goToBackup")]})]})]})]})]})]}),O==="network"&&k&&a.jsxs("div",{className:"flex flex-col lg:flex-row gap-6",children:[a.jsxs("div",{className:"flex-1 lg:max-w-xl space-y-3",children:[a.jsxs(wt,{id:"card-externalurl",children:[a.jsx(pn,{children:a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(qs,{className:"w-5 h-5 text-blue-400"}),i("settings.externalUrl")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.externalUrlDescription")}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.bambuddyUrl")}),a.jsx("input",{type:"text",value:k.external_url??"",onChange:_e=>hn("external_url",_e.target.value),placeholder:"http://192.168.1.100:8000",className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.externalUrlHint")})]})]})]}),a.jsxs(wt,{id:"card-ftpretry",children:[a.jsx(pn,{children:a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(sr,{className:"w-5 h-5 text-blue-400"}),i("settings.ftpRetry")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.ftpRetryDescription")}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.enableRetry")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.autoRetryDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.ftp_retry_enabled??!0,onChange:_e=>hn("ftp_retry_enabled",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),k.ftp_retry_enabled&&a.jsxs("div",{className:"space-y-3 pt-2 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.retryAttempts")}),a.jsxs("div",{className:"relative w-44",children:[a.jsx("select",{value:k.ftp_retry_count??3,onChange:_e=>hn("ftp_retry_count",parseInt(_e.target.value)),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[1,2,3,4,5,6,7,8,9,10].map(_e=>a.jsx("option",{value:_e,children:i("settings.time",{count:_e})},_e))}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.retryDelay")}),a.jsxs("div",{className:"relative w-44",children:[a.jsx("select",{value:k.ftp_retry_delay??2,onChange:_e=>hn("ftp_retry_delay",parseInt(_e.target.value)),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[1,2,3,5,10,15,20,30].map(_e=>a.jsx("option",{value:_e,children:i("settings.second",{count:_e})},_e))}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.connectionTimeout")}),a.jsxs("div",{className:"relative w-44",children:[a.jsx("select",{value:k.ftp_timeout??30,onChange:_e=>hn("ftp_timeout",parseInt(_e.target.value)),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[10,15,20,30,45,60,90,120,180,300].map(_e=>a.jsx("option",{value:_e,children:i("settings.nSeconds",{count:_e})},_e))}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.increaseForWeakWifi")})]})]})]})]})]}),a.jsxs("div",{className:"flex-1 lg:max-w-xl space-y-3",children:[a.jsxs(wt,{id:"card-ha",children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(iS,{className:"w-5 h-5 text-bambu-green"}),i("settings.homeAssistant")]}),k.ha_enabled&&Ie&&a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("span",{className:`w-2.5 h-2.5 rounded-full ${Ie.success?"bg-green-400":"bg-red-400"}`}),a.jsx("span",{className:`text-sm ${Ie.success?"text-green-400":"text-red-400"}`,children:Ie.success?i("settings.connected"):i("settings.disconnected")})]})]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.homeAssistantFullDescription")}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex-1",children:[a.jsx("p",{className:"text-white",children:i("settings.enableHomeAssistant")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.homeAssistantDescription")}),k.ha_env_managed&&a.jsxs("div",{className:"flex items-center gap-1 mt-1",children:[a.jsx(Nd,{className:"w-3 h-3 text-bambu-green"}),a.jsx("span",{className:"text-xs text-bambu-green",children:i("settings.autoEnabledViaEnv")})]})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.ha_enabled??!1,onChange:_e=>hn("ha_enabled",_e.target.checked),disabled:k.ha_env_managed,className:"sr-only peer"}),a.jsx("div",{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green ${k.ha_env_managed?"opacity-60 cursor-not-allowed":""}`})]})]}),k.ha_enabled&&a.jsxs(a.Fragment,{children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[i("settings.homeAssistantUrl"),k.ha_url_from_env&&a.jsx("span",{className:"ml-2 text-xs text-bambu-green",children:i("settings.environmentManagedLabel")})]}),a.jsxs("div",{className:"relative",children:[a.jsx("input",{type:"text",value:k.ha_url??"",onChange:_e=>hn("ha_url",_e.target.value),placeholder:"http://192.168.1.100:8123",disabled:k.ha_url_from_env,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${k.ha_url_from_env?"opacity-60 cursor-not-allowed":""}`}),k.ha_url_from_env&&a.jsx(Nd,{className:"absolute right-3 top-2.5 w-4 h-4 text-bambu-gray"})]}),k.ha_url_from_env&&a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.urlFromEnvReadOnly")})]}),a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[i("settings.longLivedAccessToken"),k.ha_token_from_env&&a.jsx("span",{className:"ml-2 text-xs text-bambu-green",children:i("settings.environmentManagedLabel")})]}),a.jsxs("div",{className:"relative",children:[a.jsx("input",{type:"password",value:k.ha_token??"",onChange:_e=>hn("ha_token",_e.target.value),placeholder:"eyJ0eXAiOiJKV1QiLC...",disabled:k.ha_token_from_env,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${k.ha_token_from_env?"opacity-60 cursor-not-allowed":""}`}),k.ha_token_from_env&&a.jsx(Nd,{className:"absolute right-3 top-2.5 w-4 h-4 text-bambu-gray"})]}),k.ha_token_from_env?a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.tokenFromEnvReadOnly")}):a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.haTokenHint")})]}),k.ha_url&&k.ha_token&&a.jsx("div",{className:"pt-2 border-t border-bambu-dark-tertiary",children:a.jsxs(De,{variant:"secondary",size:"sm",disabled:Ye,onClick:async()=>{Ze(!0),Re(null);try{const _e=await oe.testHAConnection(k.ha_url,k.ha_token);Re(_e)}catch(_e){Re({success:!1,message:null,error:_e instanceof Error?_e.message:i("common.unknownError")})}finally{Ze(!1)}},children:[Ye?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(cp,{className:"w-4 h-4"}),i("settings.testConnection")]})})]})]})]}),a.jsxs(wt,{id:"card-mqtt",children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(cp,{className:"w-5 h-5 text-blue-400"}),i("settings.mqttPublishing")]}),zi?.enabled&&a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("span",{className:`w-2.5 h-2.5 rounded-full ${zi.connected?"bg-green-400":"bg-red-400"}`}),a.jsx("span",{className:`text-sm ${zi.connected?"text-green-400":"text-red-400"}`,children:zi.connected?i("settings.connected"):i("settings.disconnected")})]})]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.mqttDescription")}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.enableMqtt")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.mqttEnableDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.mqtt_enabled??!1,onChange:_e=>hn("mqtt_enabled",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),k.mqtt_enabled&&a.jsxs("div",{className:"space-y-3 pt-2 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.brokerHostname")}),a.jsx("input",{type:"text",value:k.mqtt_broker??"",onChange:_e=>hn("mqtt_broker",_e.target.value),placeholder:"mqtt.example.com or 192.168.1.100",className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]}),a.jsxs("div",{className:"flex items-end gap-4",children:[a.jsxs("div",{className:"flex-1",children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.port")}),a.jsx("input",{type:"number",min:"1",max:"65535",value:k.mqtt_port??1883,onChange:_e=>hn("mqtt_port",Math.min(65535,Math.max(1,parseInt(_e.target.value)||1883))),className:"w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]}),a.jsxs("div",{className:"flex items-center gap-3 pb-2",children:[a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.mqtt_use_tls??!1,onChange:_e=>{const Et=_e.target.checked;hn("mqtt_use_tls",Et);const Fn=k.mqtt_port??1883;Et&&Fn===1883?hn("mqtt_port",8883):!Et&&Fn===8883&&hn("mqtt_port",1883)},className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]}),a.jsx("span",{className:"text-white text-sm",children:i("settings.useTls")})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.usernameOptional")}),a.jsx("input",{type:"text",value:k.mqtt_username??"",onChange:_e=>hn("mqtt_username",_e.target.value),placeholder:i("settings.leaveEmptyForAnonymous"),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.passwordOptional")}),a.jsx("input",{type:"password",value:k.mqtt_password??"",onChange:_e=>hn("mqtt_password",_e.target.value),placeholder:i("settings.leaveEmptyForAnonymous"),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.topicPrefix")}),a.jsx("input",{type:"text",value:k.mqtt_topic_prefix??"bambuddy",onChange:_e=>hn("mqtt_topic_prefix",_e.target.value),placeholder:"bambuddy",className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.topicPrefixHint",{prefix:k.mqtt_topic_prefix||"bambuddy"})})]}),zi&&a.jsx("div",{className:"pt-3 mt-3 border-t border-bambu-dark-tertiary",children:a.jsxs("div",{className:"flex items-center gap-2 text-sm",children:[a.jsx("span",{className:`w-2 h-2 rounded-full ${zi.connected?"bg-green-400":"bg-red-400"}`}),a.jsx("span",{className:"text-bambu-gray",children:zi.connected?a.jsxs(a.Fragment,{children:[i("settings.mqttConnectedTo")," ",a.jsxs("span",{className:"text-white",children:[zi.broker,":",zi.port]})]}):i("settings.spoolmanDisconnected")})]})})]})]})]})]}),a.jsx("div",{className:"flex-1 lg:max-w-md space-y-3",children:a.jsxs(wt,{id:"card-prometheus",children:[a.jsx(pn,{children:a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(NF,{className:"w-5 h-5 text-orange-400"}),i("settings.prometheusMetrics")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.prometheusEndpointDescription")}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.enableMetricsEndpoint")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.prometheusDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.prometheus_enabled??!1,onChange:_e=>hn("prometheus_enabled",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),k.prometheus_enabled&&a.jsxs("div",{className:"space-y-3 pt-2 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.bearerTokenOptional")}),a.jsx("input",{type:"password",value:k.prometheus_token??"",onChange:_e=>hn("prometheus_token",_e.target.value),placeholder:i("settings.leaveEmptyForNoAuth"),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.bearerTokenHint")})]}),a.jsxs("div",{className:"pt-2 border-t border-bambu-dark-tertiary",children:[a.jsx("p",{className:"text-sm text-white mb-2",children:i("settings.availableMetrics")}),a.jsxs("div",{className:"text-xs text-bambu-gray space-y-1",children:[a.jsxs("p",{children:[a.jsx("code",{className:"text-orange-400",children:"bambuddy_printer_connected"})," - ",i("settings.metricsConnectionStatus")]}),a.jsxs("p",{children:[a.jsx("code",{className:"text-orange-400",children:"bambuddy_printer_state"})," - ",i("settings.metricsPrinterState")]}),a.jsxs("p",{children:[a.jsx("code",{className:"text-orange-400",children:"bambuddy_print_progress"})," - ",i("settings.metricsPrintProgress")]}),a.jsxs("p",{children:[a.jsx("code",{className:"text-orange-400",children:"bambuddy_bed_temp_celsius"})," - ",i("settings.metricsBedTemp")]}),a.jsxs("p",{children:[a.jsx("code",{className:"text-orange-400",children:"bambuddy_nozzle_temp_celsius"})," - ",i("settings.metricsNozzleTemp")]}),a.jsxs("p",{children:[a.jsx("code",{className:"text-orange-400",children:"bambuddy_prints_total"})," - ",i("settings.metricsPrintsTotal")]}),a.jsx("p",{className:"text-bambu-gray/70 italic",children:i("settings.metricsMore")})]})]})]})]})]})})]}),Ie&&a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50",children:a.jsxs("div",{className:"bg-bambu-dark-secondary rounded-lg p-6 max-w-md w-full mx-4",children:[a.jsxs("div",{className:"flex items-center gap-3 mb-4",children:[Ie.success?a.jsx(wr,{className:"w-8 h-8 text-green-400"}):a.jsx(Da,{className:"w-8 h-8 text-red-400"}),a.jsx("h3",{className:"text-lg font-medium text-white",children:Ie.success?i("settings.connectionSuccessful"):i("settings.connectionFailed")})]}),a.jsx("p",{className:"text-bambu-gray mb-6",children:Ie.success?Ie.message||i("settings.haConnectionSuccess"):Ie.error||i("settings.haConnectionFailed")}),a.jsx("div",{className:"flex justify-end",children:a.jsx(De,{variant:"primary",onClick:()=>Re(null),children:i("settings.ok")})})]})}),O==="plugs"&&a.jsxs("div",{id:"card-plugs",children:[a.jsxs("div",{className:"flex items-start justify-between mb-6",children:[a.jsxs("div",{children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(tc,{className:"w-5 h-5 text-bambu-green"}),i("settings.smartPlugs")]}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:i("settings.smartPlugsDescription")})]}),a.jsxs("div",{className:"flex items-center gap-2 pt-1 shrink-0",children:[Ke&&Ke.filter(_e=>_e.enabled).length>1&&a.jsxs(a.Fragment,{children:[a.jsxs(De,{variant:"secondary",size:"sm",className:"whitespace-nowrap",onClick:()=>ze("on"),disabled:Ys.isPending,title:i("settings.turnAllPlugsOn"),children:[Ys.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Jd,{className:"w-4 h-4 text-bambu-green"}),i("settings.allOn")]}),a.jsxs(De,{variant:"secondary",size:"sm",className:"whitespace-nowrap",onClick:()=>ze("off"),disabled:Ys.isPending,title:i("settings.turnAllPlugsOff"),children:[Ys.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(dS,{className:"w-4 h-4 text-red-400"}),i("settings.allOff")]})]}),a.jsxs(De,{className:"whitespace-nowrap",onClick:()=>{R(null),z(!0)},children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.addSmartPlug")]})]})]}),Ke&&Ke.length>0&&a.jsxs(wt,{className:"mb-6",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",children:[a.jsx(cc,{className:"w-4 h-4 text-yellow-400"}),i("settings.energySummary"),on&&a.jsx(mt,{className:"w-4 h-4 animate-spin text-bambu-gray ml-2"})]})}),a.jsx(St,{children:Yt?a.jsxs("div",{className:"grid grid-cols-2 md:grid-cols-4 gap-4",children:[a.jsxs("div",{className:"bg-bambu-dark rounded-lg p-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-bambu-gray text-xs mb-1",children:[a.jsx(cc,{className:"w-3 h-3"}),i("settings.currentPower")]}),a.jsxs("div",{className:"text-xl font-bold text-white",children:[Yt.totalPower.toFixed(1),a.jsx("span",{className:"text-sm font-normal text-bambu-gray ml-1",children:"W"})]}),a.jsx("div",{className:"text-xs text-bambu-gray mt-1",children:i("settings.plugsOnline",{reachable:Yt.reachableCount,total:Yt.totalPlugs})})]}),a.jsxs("div",{className:"bg-bambu-dark rounded-lg p-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-bambu-gray text-xs mb-1",children:[a.jsx(da,{className:"w-3 h-3"}),i("settings.today")]}),a.jsxs("div",{className:"text-xl font-bold text-white",children:[Yt.totalToday.toFixed(3),a.jsx("span",{className:"text-sm font-normal text-bambu-gray ml-1",children:"kWh"})]}),(k?.energy_cost_per_kwh??0)>0&&a.jsxs("div",{className:"text-xs text-bambu-gray mt-1",children:["~",(Yt.totalToday*(k?.energy_cost_per_kwh??0)).toFixed(2)," ",Mo(k?.currency||"USD")]})]}),a.jsxs("div",{className:"bg-bambu-dark rounded-lg p-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-bambu-gray text-xs mb-1",children:[a.jsx(NF,{className:"w-3 h-3"}),i("settings.yesterday")]}),a.jsxs("div",{className:"text-xl font-bold text-white",children:[Yt.totalYesterday.toFixed(3),a.jsx("span",{className:"text-sm font-normal text-bambu-gray ml-1",children:"kWh"})]}),(k?.energy_cost_per_kwh??0)>0&&a.jsxs("div",{className:"text-xs text-bambu-gray mt-1",children:["~",(Yt.totalYesterday*(k?.energy_cost_per_kwh??0)).toFixed(2)," ",Mo(k?.currency||"USD")]})]}),a.jsxs("div",{className:"bg-bambu-dark rounded-lg p-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-bambu-gray text-xs mb-1",children:[a.jsx(CN,{className:"w-3 h-3"}),i("settings.total")]}),a.jsxs("div",{className:"text-xl font-bold text-white",children:[Yt.totalLifetime.toFixed(1),a.jsx("span",{className:"text-sm font-normal text-bambu-gray ml-1",children:"kWh"})]}),(k?.energy_cost_per_kwh??0)>0&&a.jsxs("div",{className:"text-xs text-bambu-gray mt-1",children:["~",(Yt.totalLifetime*(k?.energy_cost_per_kwh??0)).toFixed(2)," ",Mo(k?.currency||"USD")]})]})]}):on?null:a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.enablePlugsForSummary")})})]}),Ht?a.jsx("div",{className:"flex justify-center py-12",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})}):Ke&&Ke.length>0?a.jsx("div",{className:"grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 xl:grid-cols-4 gap-4",children:Ke.map(_e=>a.jsx(Wnt,{plug:_e,onEdit:Et=>{R(Et),z(!0)}},_e.id))}):a.jsx(wt,{children:a.jsx(St,{className:"py-12",children:a.jsxs("div",{className:"text-center text-bambu-gray",children:[a.jsx(tc,{className:"w-16 h-16 mx-auto mb-4 opacity-30"}),a.jsx("p",{className:"text-lg font-medium text-white mb-2",children:i("settings.noSmartPlugsTitle")}),a.jsx("p",{className:"text-sm mb-4",children:i("settings.noSmartPlugsDescription")}),a.jsxs(De,{onClick:()=>{R(null),z(!0)},children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.addFirstSmartPlug")]})]})})})]}),O==="notifications"&&a.jsxs("div",{className:"grid grid-cols-1 lg:grid-cols-2 gap-4",children:[a.jsxs("div",{children:[a.jsxs("div",{className:"flex items-center justify-between mb-4",children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",id:"card-providers",children:[a.jsx(ap,{className:"w-5 h-5 text-bambu-green"}),i("settings.providers")]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsxs(De,{size:"sm",variant:"secondary",onClick:()=>B(!0),children:[a.jsx(dw,{className:"w-4 h-4"}),i("settings.log")]}),wn&&wn.length>0&&a.jsxs(De,{size:"sm",variant:"secondary",onClick:()=>{iu(null),zm.mutate()},disabled:zm.isPending,children:[zm.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(uS,{className:"w-4 h-4"}),i("settings.testAll")]}),a.jsxs(De,{size:"sm",onClick:()=>{ue(null),re(!0)},children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.addNotificationProvider")]})]})]}),a.jsx(wt,{className:"mb-4",children:a.jsx(St,{className:"py-3",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm font-medium",children:i("settings.notificationLanguage")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.notificationLanguageDescription")})]}),a.jsx("select",{value:k.notification_language||"en",onChange:_e=>hn("notification_language",_e.target.value),className:"px-2 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:ring-1 focus:ring-bambu-green",children:CH.map(_e=>a.jsx("option",{value:_e.code,children:_e.nativeName},_e.code))})]})})}),a.jsx(wt,{className:"mb-4",children:a.jsx(St,{className:"py-3",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm font-medium",children:i("settings.bedCooledThreshold")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.bedCooledThresholdDescription")})]}),a.jsxs("div",{className:"flex items-center gap-1",children:[a.jsx("input",{type:"number",min:20,max:80,step:1,value:k.bed_cooled_threshold??35,onChange:_e=>hn("bed_cooled_threshold",Number(_e.target.value)),className:"w-16 px-2 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm text-center focus:outline-none focus:ring-1 focus:ring-bambu-green"}),a.jsx("span",{className:"text-sm text-bambu-gray",children:"°C"})]})]})})}),a.jsx(wt,{className:"mb-4",children:a.jsx(St,{className:"py-3",children:a.jsxs("div",{className:`flex items-center justify-between ${ha?.advanced_auth_enabled?"":"opacity-50"}`,children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm font-medium",children:i("settings.userNotificationsEnabled")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:ha?.advanced_auth_enabled?i("settings.userNotificationsEnabledDescription"):i("settings.userNotificationsDisabledHint")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",className:"sr-only peer",checked:k.user_notifications_enabled??!0,disabled:!ha?.advanced_auth_enabled,onChange:_e=>hn("user_notifications_enabled",_e.target.checked)}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green peer-disabled:cursor-not-allowed"})]})]})})}),ci&&a.jsx(wt,{className:"mb-4",children:a.jsxs(St,{className:"py-3",children:[a.jsxs("div",{className:"flex items-center justify-between mb-2",children:[a.jsx("span",{className:"text-sm font-medium text-white",children:i("settings.testResults")}),a.jsx("button",{onClick:()=>iu(null),className:"text-bambu-gray hover:text-white text-xs",children:i("common.dismiss")})]}),a.jsxs("div",{className:"flex items-center gap-4 text-sm mb-2",children:[a.jsxs("span",{className:"flex items-center gap-1 text-bambu-green",children:[a.jsx(wr,{className:"w-4 h-4"}),i("settings.testPassedCount",{count:ci.success})]}),ci.failed>0&&a.jsxs("span",{className:"flex items-center gap-1 text-red-400",children:[a.jsx(Da,{className:"w-4 h-4"}),i("settings.testFailedCount",{count:ci.failed})]})]}),ci.results.filter(_e=>!_e.success).length>0&&a.jsx("div",{className:"space-y-1 mt-2 pt-2 border-t border-bambu-dark-tertiary",children:ci.results.filter(_e=>!_e.success).map(_e=>a.jsxs("div",{className:"text-xs text-red-400",children:[a.jsxs("span",{className:"font-medium",children:[_e.provider_name,":"]})," ",_e.message]},_e.provider_id))})]})}),gn?a.jsx("div",{className:"flex justify-center py-12",children:a.jsx(mt,{className:"w-6 h-6 text-bambu-green animate-spin"})}):wn&&wn.length>0?a.jsx("div",{className:"space-y-3",children:wn.map(_e=>a.jsx(Xnt,{provider:_e,onEdit:Et=>{ue(Et),re(!0)}},_e.id))}):a.jsx(wt,{children:a.jsx(St,{className:"py-8",children:a.jsxs("div",{className:"text-center text-bambu-gray",children:[a.jsx(ap,{className:"w-12 h-12 mx-auto mb-3 opacity-30"}),a.jsx("p",{className:"text-sm font-medium text-white mb-2",children:i("settings.noProvidersTitle")}),a.jsx("p",{className:"text-xs mb-3",children:i("settings.noProvidersDescription")}),a.jsxs(De,{size:"sm",onClick:()=>{ue(null),re(!0)},children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.addProvider")]})]})})})]}),a.jsxs("div",{children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2 mb-2",id:"card-templates",children:[a.jsx(Ns,{className:"w-5 h-5 text-bambu-green"}),i("settings.messageTemplates")]}),a.jsx("p",{className:"text-sm text-bambu-gray mb-3",children:i("settings.messageTemplatesDescription")}),a.jsxs("div",{className:"relative mb-3",children:[a.jsx(Nr,{className:"w-4 h-4 text-bambu-gray absolute left-3 top-1/2 -translate-y-1/2 pointer-events-none"}),a.jsx("input",{type:"text",value:K,onChange:_e=>ae(_e.target.value),placeholder:i("settings.filterTemplates","Filter templates…"),className:"w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green"}),K&&a.jsx("button",{onClick:()=>ae(""),className:"absolute right-2 top-1/2 -translate-y-1/2 p-1 text-bambu-gray hover:text-white","aria-label":"Clear filter",children:a.jsx(Bt,{className:"w-3.5 h-3.5"})})]}),$n?a.jsx("div",{className:"flex justify-center py-8",children:a.jsx(mt,{className:"w-6 h-6 text-bambu-green animate-spin"})}):Ra&&Ra.length>0?(()=>{const _e=K.trim().toLowerCase(),Et=[...Ra].sort((Fn,kn)=>Fn.name.localeCompare(kn.name)).filter(Fn=>!_e||Fn.name.toLowerCase().includes(_e)||(Fn.title_template||"").toLowerCase().includes(_e));return Et.length===0?a.jsx("p",{className:"text-sm text-bambu-gray italic text-center py-6",children:i("settings.noTemplatesMatch","No templates match your filter.")}):a.jsx("div",{className:"space-y-2",children:Et.map(Fn=>a.jsx(wt,{className:"cursor-pointer hover:border-bambu-green/50 transition-colors",onClick:()=>se(Fn),children:a.jsx(St,{className:"py-2.5 px-3",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"min-w-0 flex-1",children:[a.jsx("p",{className:"text-white font-medium text-sm truncate",children:Fn.name}),a.jsx("p",{className:"text-bambu-gray text-xs truncate mt-0.5",children:Fn.title_template})]}),a.jsx("button",{className:"p-1.5 hover:bg-bambu-dark-tertiary rounded transition-colors shrink-0 ml-2",onClick:kn=>{kn.stopPropagation(),se(Fn)},children:a.jsx(Ju,{className:"w-4 h-4 text-bambu-gray"})})]})})},Fn.id))})})():a.jsx(wt,{children:a.jsx(St,{className:"py-8",children:a.jsxs("div",{className:"text-center text-bambu-gray",children:[a.jsx(Ns,{className:"w-12 h-12 mx-auto mb-3 opacity-30"}),a.jsx("p",{className:"text-sm",children:i("settings.noTemplatesAvailable")})]})})})]})]}),O==="apikeys"&&a.jsxs("div",{className:m("api_keys:read")?"grid grid-cols-1 xl:grid-cols-2 gap-4":"grid grid-cols-1 gap-4",children:[a.jsxs("div",{children:[m("api_keys:read")&&a.jsxs(a.Fragment,{children:[a.jsxs("div",{className:"flex items-start justify-between gap-4 mb-6",children:[a.jsxs("div",{className:"flex-1",children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",id:"card-createapi",children:[a.jsx(ao,{className:"w-5 h-5 text-bambu-green"}),i("settings.apiKeys")]}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:i("settings.apiKeysDescription")})]}),a.jsxs(De,{size:"sm",onClick:()=>te(!0),className:"flex-shrink-0",children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.createKey")]})]}),H&&a.jsx(wt,{className:"mb-6 border-bambu-green",children:a.jsx(St,{className:"py-4",children:a.jsxs("div",{className:"flex items-start gap-3",children:[a.jsx(wr,{className:"w-5 h-5 text-bambu-green flex-shrink-0 mt-0.5"}),a.jsxs("div",{className:"flex-1",children:[a.jsx("p",{className:"text-white font-medium mb-1",children:i("settings.apiKeyCreated")}),a.jsx("p",{className:"text-sm text-bambu-gray mb-2",children:i("settings.apiKeyCopyWarning")}),a.jsxs("div",{className:"flex items-center gap-2 bg-bambu-dark rounded-lg p-2",children:[a.jsx("code",{className:"flex-1 text-sm text-bambu-green font-mono break-all",children:H}),a.jsx(De,{variant:"secondary",size:"sm",onClick:async()=>{try{if(navigator.clipboard&&navigator.clipboard.writeText)await navigator.clipboard.writeText(H);else{const _e=document.createElement("textarea");_e.value=H,_e.style.position="fixed",_e.style.left="-999999px",document.body.appendChild(_e),_e.select(),document.execCommand("copy"),document.body.removeChild(_e)}o(i("settings.toast.keyCopied"))}catch{o(i("settings.toast.copyFailed"),"error")}},children:a.jsx(ns,{className:"w-4 h-4"})})]}),a.jsxs("div",{className:"flex gap-2 mt-3",children:[a.jsx(De,{variant:"secondary",size:"sm",onClick:()=>{je(H),o(i("settings.toast.keyAddedToBrowser"))},children:i("settings.useInApiBrowser")}),a.jsx(De,{variant:"secondary",size:"sm",onClick:()=>L(null),children:i("common.dismiss")})]})]})]})})}),W&&a.jsxs(wt,{className:"mb-6",children:[a.jsx(pn,{children:a.jsx("h3",{className:"text-base font-semibold text-white",children:i("settings.createNewApiKey")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.keyName")}),a.jsx("input",{type:"text",value:le,onChange:_e=>ye(_e.target.value),placeholder:i("settings.keyNamePlaceholder"),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-2",children:i("common.permissions")}),a.jsxs("div",{className:"space-y-2",children:[a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:he.can_read_status,onChange:_e=>me(Et=>({...Et,can_read_status:_e.target.checked})),className:"w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green"}),a.jsxs("div",{children:[a.jsx("span",{className:"text-white",children:i("settings.readStatus")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.readStatusDescription")})]})]}),a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:he.can_queue,onChange:_e=>me(Et=>({...Et,can_queue:_e.target.checked})),className:"w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green"}),a.jsxs("div",{children:[a.jsx("span",{className:"text-white",children:i("settings.manageQueue")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.manageQueueDescription")})]})]}),a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:he.can_control_printer,onChange:_e=>me(Et=>({...Et,can_control_printer:_e.target.checked})),className:"w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green"}),a.jsxs("div",{children:[a.jsx("span",{className:"text-white",children:i("settings.controlPrinter")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.controlPrinterDescription")})]})]})]})]}),a.jsxs("div",{className:"flex items-center gap-2 pt-2",children:[a.jsxs(De,{onClick:()=>br.mutate({name:le||i("settings.unnamedKey"),...he}),disabled:br.isPending,children:[br.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(nr,{className:"w-4 h-4"}),i("settings.createKey")]}),a.jsx(De,{variant:"secondary",onClick:()=>te(!1),children:i("common.cancel")})]})]})]}),xn?a.jsx("div",{className:"flex justify-center py-12",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})}):_n&&_n.length>0?a.jsx("div",{className:"space-y-3",children:_n.map(_e=>a.jsx(wt,{children:a.jsx(St,{className:"py-3",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsx(ao,{className:`w-5 h-5 ${_e.enabled?"text-bambu-green":"text-bambu-gray"}`}),a.jsxs("div",{children:[a.jsx("p",{className:"text-white font-medium",children:_e.name}),a.jsxs("p",{className:"text-xs text-bambu-gray",children:[_e.key_prefix,"••••••••",_e.last_used&&` · ${i("settings.lastUsed")}: ${yg(_e.last_used)}`]})]})]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsxs("div",{className:"flex gap-1 text-xs",children:[_e.can_read_status&&a.jsx("span",{className:"px-1.5 py-0.5 bg-blue-500/20 text-blue-400 rounded",children:i("settings.read")}),_e.can_queue&&a.jsx("span",{className:"px-1.5 py-0.5 bg-green-500/20 text-green-400 rounded",children:i("queue.title")}),_e.can_control_printer&&a.jsx("span",{className:"px-1.5 py-0.5 bg-orange-500/20 text-orange-400 rounded",children:i("settings.control")})]}),a.jsx(De,{variant:"secondary",size:"sm",onClick:()=>ge(_e.id),children:a.jsx(Zt,{className:"w-4 h-4 text-red-400"})})]})]})})},_e.id))}):a.jsx(wt,{children:a.jsx(St,{className:"py-12",children:a.jsxs("div",{className:"text-center text-bambu-gray",children:[a.jsx(ao,{className:"w-16 h-16 mx-auto mb-4 opacity-30"}),a.jsx("p",{className:"text-lg font-medium text-white mb-2",children:i("settings.apiKeysEmptyTitle")}),a.jsx("p",{className:"text-sm mb-4",children:i("settings.apiKeysEmptyDescription")}),a.jsxs(De,{onClick:()=>te(!0),children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.createFirstKey")]})]})})}),a.jsxs(wt,{className:"mt-6",children:[a.jsx(pn,{children:a.jsx("h3",{className:"text-base font-semibold text-white",id:"card-webhooks",children:i("settings.webhookEndpoints")})}),a.jsxs(St,{className:"space-y-3 text-sm",children:[a.jsx("p",{className:"text-bambu-gray",children:i("settings.webhookApiKeyHint")}),a.jsxs("div",{className:"space-y-2 font-mono text-xs",children:[a.jsxs("div",{className:"p-2 bg-bambu-dark rounded",children:[a.jsx("span",{className:"text-blue-400",children:"GET"})," ",a.jsx("span",{className:"text-white",children:"/api/v1/webhook/status"}),a.jsxs("span",{className:"text-bambu-gray",children:[" - ",i("settings.webhook.getAllStatus")]})]}),a.jsxs("div",{className:"p-2 bg-bambu-dark rounded",children:[a.jsx("span",{className:"text-blue-400",children:"GET"})," ",a.jsx("span",{className:"text-white",children:"/api/v1/webhook/status/:id"}),a.jsxs("span",{className:"text-bambu-gray",children:[" - ",i("settings.webhook.getSpecificStatus")]})]}),a.jsxs("div",{className:"p-2 bg-bambu-dark rounded",children:[a.jsx("span",{className:"text-green-400",children:"POST"})," ",a.jsx("span",{className:"text-white",children:"/api/v1/webhook/queue"}),a.jsxs("span",{className:"text-bambu-gray",children:[" - ",i("settings.webhook.addToQueue")]})]}),a.jsxs("div",{className:"p-2 bg-bambu-dark rounded",children:[a.jsx("span",{className:"text-orange-400",children:"POST"})," ",a.jsx("span",{className:"text-white",children:"/api/v1/webhook/printer/:id/pause"}),a.jsxs("span",{className:"text-bambu-gray",children:[" - ",i("settings.webhook.pausePrint")]})]}),a.jsxs("div",{className:"p-2 bg-bambu-dark rounded",children:[a.jsx("span",{className:"text-orange-400",children:"POST"})," ",a.jsx("span",{className:"text-white",children:"/api/v1/webhook/printer/:id/resume"}),a.jsxs("span",{className:"text-bambu-gray",children:[" - ",i("settings.webhook.resumePrint")]})]}),a.jsxs("div",{className:"p-2 bg-bambu-dark rounded",children:[a.jsx("span",{className:"text-red-400",children:"POST"})," ",a.jsx("span",{className:"text-white",children:"/api/v1/webhook/printer/:id/stop"}),a.jsxs("span",{className:"text-bambu-gray",children:[" - ",i("settings.webhook.stopPrint")]})]})]})]})]})]}),a.jsxs(wt,{className:"mt-6",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",id:"card-camera-tokens",children:[a.jsx(FN,{className:"w-4 h-4 text-bambu-green"}),i("cameraTokens.title","Camera API Tokens")]})}),a.jsx(St,{children:a.jsx(Gnt,{})})]})]}),m("api_keys:read")&&a.jsxs("div",{children:[a.jsxs("div",{className:"mb-6",children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",id:"card-apibrowser",children:[a.jsx(qs,{className:"w-5 h-5 text-bambu-green"}),i("settings.apiBrowser")]}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:i("settings.apiBrowserDescription")})]}),a.jsx(wt,{className:"mb-4",children:a.jsxs(St,{className:"py-3",children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-2",children:i("settings.apiKeyForTesting")}),a.jsx("input",{type:"text",value:ke,onChange:_e=>je(_e.target.value),placeholder:i("settings.apiKeyPlaceholder"),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white font-mono text-sm focus:border-bambu-green focus:outline-none"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-2",children:i("settings.apiKeyHint")})]})}),a.jsx(Prt,{apiKey:ke})]})]}),O==="virtual-printer"&&a.jsx("div",{id:"card-vp",children:a.jsx(drt,{})}),O==="spoolbuddy"&&a.jsx("div",{id:"card-spoolbuddy",children:a.jsx(mrt,{})}),O==="queue"&&k&&a.jsxs("div",{className:"flex flex-col lg:flex-row gap-4 lg:gap-6",children:[a.jsxs("div",{className:"lg:w-1/2 space-y-3",children:[a.jsxs(wt,{id:"card-print-options",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",children:[a.jsx(jN,{className:"w-4 h-4 text-bambu-green"}),i("settings.defaultPrintOptions","Default Print Options")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.defaultPrintOptionsDescription","Set default values for print options when starting new prints. These can be overridden per print in the print dialog.")}),[{key:"default_bed_levelling",label:i("settings.defaultBedLevelling","Bed Levelling"),desc:i("settings.defaultBedLevellingDesc","Auto-level bed before print"),fallback:!0},{key:"default_flow_cali",label:i("settings.defaultFlowCali","Flow Calibration"),desc:i("settings.defaultFlowCaliDesc","Calibrate extrusion flow"),fallback:!1},{key:"default_vibration_cali",label:i("settings.defaultVibrationCali","Vibration Calibration"),desc:i("settings.defaultVibrationCaliDesc","Reduce ringing artifacts"),fallback:!0},{key:"default_layer_inspect",label:i("settings.defaultLayerInspect","First Layer Inspection"),desc:i("settings.defaultLayerInspectDesc","AI inspection of first layer"),fallback:!1},{key:"default_timelapse",label:i("settings.defaultTimelapse","Timelapse"),desc:i("settings.defaultTimelapseDesc","Record timelapse video"),fallback:!1}].map(({key:_e,label:Et,desc:Fn,fallback:kn})=>a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex-1 mr-4",children:[a.jsx("p",{className:"text-sm text-white",children:Et}),a.jsx("p",{className:"text-xs text-bambu-gray mt-0.5",children:Fn})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k[_e]??kn,onChange:it=>hn(_e,it.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]},_e))]})]}),a.jsxs(wt,{id:"card-staggered",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",children:[a.jsx(ia,{className:"w-4 h-4 text-bambu-green"}),i("settings.staggeredStart","Staggered Start")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.staggeredStartDescription","Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.")}),a.jsxs("div",{className:"flex gap-4",children:[a.jsxs("div",{className:"flex-1",children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.staggerGroupSize","Group size")}),a.jsx("input",{type:"number",min:1,max:50,value:k.stagger_group_size??2,onChange:_e=>hn("stagger_group_size",Math.max(1,Math.min(50,parseInt(_e.target.value)||1))),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.staggerGroupSizeHelp","Printers to start simultaneously per group")})]}),a.jsxs("div",{className:"flex-1",children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.staggerInterval","Interval (minutes)")}),a.jsx("input",{type:"number",min:1,max:60,value:k.stagger_interval_minutes??5,onChange:_e=>hn("stagger_interval_minutes",Math.max(1,Math.min(60,parseInt(_e.target.value)||1))),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.staggerIntervalHelp","Delay between each group starting")})]})]})]})]}),a.jsxs(wt,{id:"card-plate",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",children:[a.jsx(Wu,{className:"w-4 h-4 text-bambu-green"}),i("settings.plateClear","Plate-Clear Confirmation")]})}),a.jsx(St,{className:"space-y-3",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex-1 mr-4",children:[a.jsx("p",{className:"text-sm text-white",children:i("settings.requirePlateClear","Require plate-clear confirmation")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.requirePlateClearDescription",'When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disabling this also hides the plate status badge and the "Mark plate as cleared" button on printer cards.')})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.require_plate_clear??!1,onChange:_e=>hn("require_plate_clear",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]})})]}),a.jsxs(wt,{id:"card-gcode",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",children:[a.jsx(Py,{className:"w-4 h-4 text-bambu-green"}),i("settings.gcodeInjection","G-code Injection")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.gcodeInjectionDescription",'Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.')}),(()=>{const _e=(()=>{try{return k.gcode_snippets?JSON.parse(k.gcode_snippets):{}}catch{return{}}})(),Et=[...new Set((On||[]).filter(it=>it.model).map(it=>it.model))].sort(),Fn=(it,Dt,Xt)=>{const ct={..._e};ct[it]||(ct[it]={start_gcode:"",end_gcode:""}),ct[it][Dt]=Xt,!ct[it].start_gcode&&!ct[it].end_gcode&&delete ct[it];const Mn=Object.keys(ct).length>0?JSON.stringify(ct):"";E(xr=>xr?{...xr,gcode_snippets:Mn}:null),kl.current=Mn},kn=()=>{kl.current!==null&&(Um.mutate({gcode_snippets:kl.current}),kl.current=null)};return Et.length===0?a.jsx("p",{className:"text-sm text-bambu-gray italic",children:i("settings.gcodeInjectionNoPrinters","No printers found. Add printers to configure G-code snippets.")}):Et.map(it=>{const Dt=_e[it]||{start_gcode:"",end_gcode:""},Xt=!!(Dt.start_gcode||Dt.end_gcode);return a.jsx(Uz,{defaultOpen:Xt,className:"border border-bambu-dark-tertiary rounded-lg px-3 py-2",summary:a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("h4",{className:"text-sm font-medium text-white",children:it}),Xt&&a.jsx("span",{className:"text-xs px-1.5 py-0.5 rounded bg-bambu-green/20 text-bambu-green",children:i("settings.gcodeConfigured","Configured")})]}),children:a.jsxs("div",{className:"space-y-2",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.gcodeStartLabel","Start G-code")}),a.jsx("textarea",{value:Dt.start_gcode,onChange:ct=>Fn(it,"start_gcode",ct.target.value),onBlur:kn,placeholder:i("settings.gcodeStartPlaceholder","G-code prepended before the print starts..."),rows:3,className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-xs font-mono focus:outline-none focus:border-bambu-green resize-y"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.gcodeEndLabel","End G-code")}),a.jsx("textarea",{value:Dt.end_gcode,onChange:ct=>Fn(it,"end_gcode",ct.target.value),onBlur:kn,placeholder:i("settings.gcodeEndPlaceholder","G-code appended after the print ends..."),rows:3,className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-xs font-mono focus:outline-none focus:border-bambu-green resize-y"})]})]})},it)})})()]})]})]}),a.jsxs("div",{className:"lg:w-1/2 space-y-3",children:[a.jsxs(wt,{id:"card-slicer",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",children:[a.jsx(Ud,{className:"w-4 h-4 text-bambu-green"}),i("settings.slicerCard","Slicer")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.preferredSlicer")}),a.jsxs("div",{className:"relative",children:[a.jsxs("select",{value:k.preferred_slicer??"bambu_studio",onChange:_e=>hn("preferred_slicer",_e.target.value),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[a.jsx("option",{value:"bambu_studio",children:i("settings.slicerBambuStudio")}),a.jsx("option",{value:"orcaslicer",children:i("settings.slicerOrcaSlicer")})]}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.preferredSlicerDescription")}),(k.preferred_slicer??"bambu_studio")==="orcaslicer"&&a.jsx("div",{role:"alert",className:"text-xs text-amber-200 bg-amber-900/20 border border-amber-700/40 rounded p-2 mt-2",children:i("settings.orcaslicerKnownIssuesWarning","OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.")})]}),a.jsxs("div",{className:"flex items-center justify-between gap-3",children:[a.jsxs("div",{className:"min-w-0",children:[a.jsx("p",{className:"text-white",children:i("settings.useSlicerApi")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.useSlicerApiDescription")})]}),a.jsxs("label",{className:"flex items-center cursor-pointer shrink-0",children:[a.jsx("input",{type:"checkbox",checked:k.use_slicer_api??!1,onChange:_e=>hn("use_slicer_api",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"relative w-11 h-6 bg-bambu-dark-tertiary rounded-full peer peer-checked:bg-bambu-green peer-focus:outline-none peer-focus:ring-2 peer-focus:ring-bambu-green/50 transition-colors after:content-[''] after:absolute after:top-0.5 after:left-0.5 after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-transform peer-checked:after:translate-x-5"})]})]}),(k.use_slicer_api??!1)&&a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:(k.preferred_slicer??"bambu_studio")==="orcaslicer"?i("settings.orcaslicerApiUrl","OrcaSlicer sidecar URL"):i("settings.bambuStudioApiUrl","Bambu Studio sidecar URL")}),a.jsx("input",{type:"text",value:((k.preferred_slicer??"bambu_studio")==="orcaslicer"?k.orcaslicer_api_url:k.bambu_studio_api_url)??"",onChange:_e=>hn((k.preferred_slicer??"bambu_studio")==="orcaslicer"?"orcaslicer_api_url":"bambu_studio_api_url",_e.target.value),placeholder:(k.preferred_slicer??"bambu_studio")==="orcaslicer"?"http://localhost:3003":"http://localhost:3001",className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none placeholder:text-bambu-gray/40"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.slicerApiUrlDescription","URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.")})]})]})]}),a.jsxs(wt,{children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",id:"card-drying",children:[a.jsx(qu,{className:"w-4 h-4 text-amber-400"}),i("settings.queueDrying")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.queueDryingDescription")}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-white",children:i("settings.queueDryingEnabled")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-0.5",children:i("settings.queueDryingEnabledDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.queue_drying_enabled??!1,onChange:_e=>hn("queue_drying_enabled",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),k.queue_drying_enabled&&a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-white",children:i("settings.queueDryingBlock")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-0.5",children:i("settings.queueDryingBlockDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.queue_drying_block??!1,onChange:_e=>hn("queue_drying_block",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-amber-500"})]})]}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-white",children:i("settings.ambientDryingEnabled")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-0.5",children:i("settings.ambientDryingEnabledDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.ambient_drying_enabled??!1,onChange:_e=>hn("ambient_drying_enabled",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{className:"space-y-2",children:[a.jsx("p",{className:"text-sm text-white font-medium",children:i("settings.dryingPresets")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.dryingPresetsDescription")}),a.jsx("div",{className:"overflow-x-auto",children:a.jsxs("table",{className:"w-full text-xs",children:[a.jsx("thead",{children:a.jsxs("tr",{className:"text-bambu-gray border-b border-bambu-dark-tertiary",children:[a.jsx("th",{className:"text-left py-1.5",children:i("settings.dryingFilament")}),a.jsx("th",{className:"text-center py-1.5",colSpan:2,children:"AMS 2 Pro"}),a.jsx("th",{className:"text-center py-1.5",colSpan:2,children:"AMS-HT"})]})}),a.jsx("tbody",{children:(()=>{const _e={PLA:{n3f:45,n3s:45,n3f_hours:12,n3s_hours:12},PETG:{n3f:65,n3s:65,n3f_hours:12,n3s_hours:12},TPU:{n3f:65,n3s:75,n3f_hours:12,n3s_hours:18},ABS:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},ASA:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:12},PC:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PVA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:18}};let Et={..._e};try{if(k.drying_presets){const kn=JSON.parse(k.drying_presets);typeof kn=="object"&&kn!==null&&(Et={..._e,...kn})}}catch{}const Fn=(kn,it,Dt)=>{const Xt={...Et,[kn]:{...Et[kn],[it]:Dt}};hn("drying_presets",JSON.stringify(Xt))};return Object.entries(Et).map(([kn,it])=>a.jsxs("tr",{className:"border-b border-bambu-dark-tertiary/50",children:[a.jsx("td",{className:"py-1.5 pr-2 text-white font-medium",children:kn}),a.jsx("td",{className:"py-1 px-1",children:a.jsxs("div",{className:"flex items-center justify-end gap-1",children:[a.jsx("input",{type:"number",min:30,max:65,value:it.n3f,onChange:Dt=>Fn(kn,"n3f",Math.max(1,parseInt(Dt.target.value)||0)),className:"w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none"}),a.jsx("span",{className:"text-bambu-gray",children:"°C"})]})}),a.jsx("td",{className:"py-1 px-1",children:a.jsxs("div",{className:"flex items-center gap-1",children:[a.jsx("input",{type:"number",min:1,max:24,value:it.n3f_hours,onChange:Dt=>Fn(kn,"n3f_hours",Math.max(1,parseInt(Dt.target.value)||0)),className:"w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none"}),a.jsx("span",{className:"text-bambu-gray",children:"h"})]})}),a.jsx("td",{className:"py-1 px-1",children:a.jsxs("div",{className:"flex items-center justify-end gap-1",children:[a.jsx("input",{type:"number",min:30,max:85,value:it.n3s,onChange:Dt=>Fn(kn,"n3s",Math.max(1,parseInt(Dt.target.value)||0)),className:"w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none"}),a.jsx("span",{className:"text-bambu-gray",children:"°C"})]})}),a.jsx("td",{className:"py-1 px-1",children:a.jsxs("div",{className:"flex items-center gap-1",children:[a.jsx("input",{type:"number",min:1,max:24,value:it.n3s_hours,onChange:Dt=>Fn(kn,"n3s_hours",Math.max(1,parseInt(Dt.target.value)||0)),className:"w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none"}),a.jsx("span",{className:"text-bambu-gray",children:"h"})]})})]},kn))})()})]})})]})]})]})]})]}),O==="filament"&&k&&a.jsx(a.Fragment,{children:a.jsxs("div",{className:"flex flex-col lg:flex-row gap-4 lg:gap-6",children:[a.jsxs("div",{className:"lg:w-1/3 space-y-3",children:[a.jsx(rrt,{}),a.jsxs(wt,{id:"card-filamentchecks",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.filamentChecks")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.disableFilamentWarnings")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.disableFilamentWarningsDesc")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.disable_filament_warnings,onChange:_e=>hn("disable_filament_warnings",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.preferLowestFilament")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.preferLowestFilamentDesc")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.prefer_lowest_filament,onChange:_e=>hn("prefer_lowest_filament",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]})]})]}),a.jsxs(wt,{id:"card-printmodal",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.printModal")})}),a.jsx(St,{className:"space-y-3",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.expandCustomMapping")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.expandCustomMappingDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.per_printer_mapping_expanded??!1,onChange:_e=>hn("per_printer_mapping_expanded",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]})})]}),a.jsxs(wt,{id:"card-amsthresholds",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.amsDisplayThresholds")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.amsThresholdsDescription")}),a.jsxs("div",{className:"space-y-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-white",children:[a.jsx(QI,{className:"w-4 h-4 text-blue-400"}),a.jsx("span",{className:"font-medium",children:i("settings.humidity")})]}),a.jsxs("div",{className:"grid grid-cols-2 gap-3",children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[i("settings.goodGreen")," ≤"]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",min:"0",max:"100",value:k.ams_humidity_good??40,onChange:_e=>hn("ams_humidity_good",parseInt(_e.target.value)||40),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("span",{className:"text-bambu-gray",children:"%"})]})]}),a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[i("settings.fairOrange")," ≤"]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",min:"0",max:"100",value:k.ams_humidity_fair??60,onChange:_e=>hn("ams_humidity_fair",parseInt(_e.target.value)||60),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("span",{className:"text-bambu-gray",children:"%"})]})]})]}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.aboveFairBad")}),a.jsx("p",{className:"text-xs text-amber-400/70",children:i("settings.fairAlsoDryingThreshold")})]}),a.jsxs("div",{className:"space-y-3 pt-2 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{className:"flex items-center gap-2 text-white",children:[a.jsx(hS,{className:"w-4 h-4 text-orange-400"}),a.jsx("span",{className:"font-medium",children:i("settings.temperature")})]}),a.jsxs("div",{className:"grid grid-cols-2 gap-3",children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[i("settings.goodBlue")," ≤"]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",step:"0.5",min:"0",max:"60",value:k.ams_temp_good??28,onChange:_e=>hn("ams_temp_good",parseFloat(_e.target.value)||28),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("span",{className:"text-bambu-gray",children:"°C"})]})]}),a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[i("settings.fairOrange")," ≤"]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",step:"0.5",min:"0",max:"60",value:k.ams_temp_fair??35,onChange:_e=>hn("ams_temp_fair",parseFloat(_e.target.value)||35),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("span",{className:"text-bambu-gray",children:"°C"})]})]})]}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.aboveFairHot")})]}),a.jsxs("div",{className:"space-y-3 pt-4 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{className:"flex items-center gap-2 text-white",children:[a.jsx(Jl,{className:"w-4 h-4 text-purple-400"}),a.jsx("span",{className:"font-medium",children:i("settings.historyRetention")})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.keepSensorHistory")}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",min:"1",max:"365",value:k.ams_history_retention_days??30,onChange:_e=>hn("ams_history_retention_days",parseInt(_e.target.value)||30),className:"w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("span",{className:"text-bambu-gray",children:i("common.days")})]})]}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.historyRetentionDescription")})]})]})]})]}),a.jsxs("div",{className:"lg:w-2/3 space-y-3",children:[a.jsx(art,{}),a.jsx(irt,{})]})]})}),ee!==null&&a.jsx(yn,{title:i("settings.deleteApiKeyTitle"),message:i("settings.deleteApiKeyMessage"),confirmText:i("settings.deleteKey"),variant:"danger",onConfirm:()=>{Tr.mutate(ee),ge(null)},onCancel:()=>ge(null)}),$&&a.jsx(Knt,{plug:X,onClose:()=>{z(!1),R(null)}}),ne&&a.jsx(Qnt,{provider:J,onClose:()=>{re(!1),ue(null)}}),ie&&a.jsx(Jnt,{template:ie,onClose:()=>se(null)}),fe&&a.jsx(ert,{onClose:()=>B(!1)}),Te&&a.jsx(yn,{title:i("settings.clearNotificationLogs"),message:i("settings.clearLogsMessage"),confirmText:i("settings.clearLogs"),variant:"warning",onConfirm:async()=>{xe(!1);try{const _e=await oe.clearNotificationLogs(30);o(_e.message,"success")}catch{o(i("settings.toast.clearLogsFailed"),"error")}},onCancel:()=>xe(!1)}),Fe&&a.jsx(yn,{title:i("settings.resetUiPreferences"),message:i("settings.resetUiPreferencesMessage"),confirmText:i("settings.resetPreferences"),variant:"default",onConfirm:()=>{Be(!1),localStorage.clear(),o(i("settings.toast.uiPreferencesReset"),"success"),setTimeout(()=>window.location.reload(),1e3)},onCancel:()=>Be(!1)}),Ce&&a.jsx(yn,{title:`Turn All Plugs ${Ce==="on"?"On":"Off"}`,message:`This will turn ${Ce==="on"?"ON":"OFF"} all ${Ke?.filter(_e=>_e.enabled).length||0} enabled smart plugs. ${Ce==="off"?"Any running printers may be affected!":""}`,confirmText:`Turn All ${Ce==="on"?"On":"Off"}`,variant:Ce==="off"?"danger":"warning",onConfirm:()=>{const _e=Ce;ze(null),Ys.mutate(_e)},onCancel:()=>ze(null)}),Me&&Ir?.release_notes&&a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4",onClick:()=>Oe(!1),children:a.jsxs(wt,{className:"w-full max-w-2xl max-h-[80vh] flex flex-col",onClick:_e=>_e.stopPropagation(),children:[a.jsxs(pn,{className:"flex flex-row items-center justify-between shrink-0",children:[a.jsxs("div",{children:[a.jsxs("h2",{className:"text-lg font-semibold text-white",children:["Release Notes - v",Ir.latest_version]}),Ir.release_name&&Ir.release_name!==Ir.latest_version&&a.jsx("p",{className:"text-sm text-bambu-gray",children:Ir.release_name})]}),a.jsx("button",{onClick:()=>Oe(!1),className:"p-1 rounded hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white",children:a.jsx(Bt,{className:"w-5 h-5"})})]}),a.jsx(St,{className:"overflow-y-auto flex-1",children:a.jsx("pre",{className:"text-sm text-bambu-gray whitespace-pre-wrap font-sans",children:Ir.release_notes})}),a.jsxs("div",{className:"p-4 border-t border-bambu-dark-tertiary shrink-0 flex gap-2",children:[Ir.release_url&&a.jsx("a",{href:Ir.release_url,target:"_blank",rel:"noopener noreferrer",className:"flex-1",children:a.jsxs(De,{variant:"secondary",className:"w-full",children:[a.jsx(Ar,{className:"w-4 h-4"}),"View on GitHub"]})}),a.jsx(De,{onClick:()=>Oe(!1),className:"flex-1",children:"Close"})]})]})}),O==="users"&&a.jsxs("div",{className:"space-y-3",children:[a.jsxs("div",{className:"flex gap-1 border-b border-bambu-dark-tertiary",children:[a.jsxs("button",{onClick:()=>G("users"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${I==="users"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(Ku,{className:"w-4 h-4"}),i("settings.tabs.users")]}),a.jsxs("button",{onClick:()=>G("email"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${I==="email"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(xm,{className:"w-4 h-4"}),i("settings.tabs.emailAuth")||"Email Authentication",ha?.advanced_auth_enabled&&a.jsx("span",{className:"w-2 h-2 rounded-full bg-green-400"})]}),a.jsxs("button",{onClick:()=>G("ldap"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${I==="ldap"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(Wu,{className:"w-4 h-4"}),i("settings.tabs.ldap")||"LDAP",vc?.ldap_enabled&&a.jsx("span",{className:"w-2 h-2 rounded-full bg-green-400"})]}),a.jsxs("button",{onClick:()=>G("twofa"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${I==="twofa"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(Wu,{className:"w-4 h-4"}),i("settings.tabs.twoFa"),a.jsx("span",{className:`w-2 h-2 rounded-full ${Im?.totp_enabled||Im?.email_otp_enabled?"bg-green-400":"bg-bambu-gray/40"}`})]}),d&&a.jsxs("button",{onClick:()=>G("oidc"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${I==="oidc"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(qs,{className:"w-4 h-4"}),i("settings.tabs.oidc"),a.jsx("span",{className:`w-2 h-2 rounded-full ${ru.some(_e=>_e.is_enabled)?"bg-green-400":"bg-bambu-gray/40"}`})]})]}),I==="users"&&a.jsxs(a.Fragment,{children:[a.jsx(wt,{children:a.jsx(St,{className:"py-4",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsx("div",{className:`w-10 h-10 rounded-full flex items-center justify-center ${l?"bg-green-500/20":"bg-gray-500/20"}`,children:l?a.jsx(Nd,{className:"w-5 h-5 text-green-400"}):a.jsx(D0,{className:"w-5 h-5 text-gray-400"})}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-white font-medium",children:i("settings.authentication")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i(l?"settings.authEnabledDescription":"settings.authDisabledDescription")})]})]}),l?c?.is_admin&&a.jsxs(De,{variant:"secondary",onClick:()=>et(!0),children:[a.jsx(D0,{className:"w-4 h-4"}),i("common.disable")]}):a.jsxs(De,{onClick:()=>e("/setup"),children:[a.jsx(Nd,{className:"w-4 h-4"}),i("common.enable")]})]})})}),ha?.advanced_auth_enabled&&a.jsx(wt,{className:"border-blue-500/30 bg-blue-500/5",children:a.jsx(St,{className:"py-4",children:a.jsxs("div",{className:"flex items-start gap-3",children:[a.jsx("div",{className:"w-10 h-10 rounded-full flex items-center justify-center bg-blue-500/20 flex-shrink-0",children:a.jsx(xm,{className:"w-5 h-5 text-blue-400"})}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-white font-medium",children:i("settings.email.advancedAuthEnabled")}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:i("settings.email.advancedAuthEnabledDesc")})]})]})})}),l&&a.jsxs("div",{className:"grid grid-cols-1 xl:grid-cols-2 gap-6",children:[a.jsxs("div",{className:"space-y-3",children:[c&&a.jsxs(wt,{children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("h3",{className:"text-lg font-semibold text-white flex items-center gap-2",id:"card-currentuser",children:[a.jsx(Ku,{className:"w-5 h-5 text-bambu-green"}),i("settings.currentUser")]}),c.auth_source!=="ldap"&&a.jsxs(De,{size:"sm",variant:"ghost",onClick:()=>Xe(!0),children:[a.jsx(ao,{className:"w-4 h-4"}),i("settings.changePassword")]})]})}),a.jsx(St,{children:a.jsx("div",{className:"flex items-center justify-between",children:a.jsxs("div",{children:[a.jsx("p",{className:"text-white font-medium text-lg",children:c.username}),a.jsxs("div",{className:"flex flex-wrap gap-1 mt-2",children:[c.is_admin&&a.jsx("span",{className:"px-2 py-0.5 rounded-full text-xs font-medium bg-purple-500/20 text-purple-300",children:i("settings.admin")}),c.groups?.map(_e=>a.jsx("span",{className:`px-2 py-0.5 rounded-full text-xs font-medium ${_e.name==="Administrators"?"bg-purple-500/20 text-purple-300":_e.name==="Operators"?"bg-blue-500/20 text-blue-300":_e.name==="Viewers"?"bg-green-500/20 text-green-300":"bg-gray-500/20 text-gray-300"}`,children:_e.name},_e.id))]})]})})})]}),a.jsxs(wt,{children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("h3",{className:"text-lg font-semibold text-white flex items-center gap-2",id:"card-users",children:[a.jsx(Ku,{className:"w-5 h-5 text-bambu-green"}),i("settings.users")]}),m("users:create")&&a.jsxs(De,{size:"sm",onClick:()=>{He(!0),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.addUser")]})]})}),a.jsx(St,{children:Vp?a.jsx("div",{className:"flex items-center justify-center py-8",children:a.jsx(mt,{className:"w-6 h-6 text-bambu-green animate-spin"})}):rd.length===0?a.jsx("p",{className:"text-center text-bambu-gray py-8",children:i("settings.noUsersFound")}):a.jsx("div",{className:"divide-y divide-bambu-dark-tertiary",children:rd.map(_e=>a.jsxs("div",{className:"py-3 flex items-center justify-between",children:[a.jsxs("div",{className:"flex-1 min-w-0",children:[a.jsx("p",{className:"text-white font-medium truncate",children:_e.username}),a.jsxs("div",{className:"flex flex-wrap gap-1 mt-1",children:[_e.auth_source==="ldap"&&a.jsx("span",{className:"px-2 py-0.5 rounded-full text-xs font-medium bg-cyan-500/20 text-cyan-300",children:"LDAP"}),_e.is_admin&&a.jsx("span",{className:"px-2 py-0.5 rounded-full text-xs font-medium bg-purple-500/20 text-purple-300",children:i("settings.admin")}),_e.groups?.map(Et=>a.jsx("span",{className:`px-2 py-0.5 rounded-full text-xs font-medium ${Et.name==="Administrators"?"bg-purple-500/20 text-purple-300":Et.name==="Operators"?"bg-blue-500/20 text-blue-300":Et.name==="Viewers"?"bg-green-500/20 text-green-300":"bg-gray-500/20 text-gray-300"}`,children:Et.name},Et.id))]})]}),a.jsxs("div",{className:"flex items-center gap-1 ml-4",children:[m("users:update")&&a.jsx(De,{size:"sm",variant:"ghost",onClick:()=>sd(_e),children:a.jsx(Ju,{className:"w-4 h-4"})}),m("users:delete")&&_e.id!==c?.id&&a.jsx(De,{size:"sm",variant:"ghost",onClick:()=>Gp(_e.id),children:a.jsx(Zt,{className:"w-4 h-4"})})]})]},_e.id))})})]})]}),a.jsx("div",{children:a.jsxs(wt,{children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("h3",{className:"text-lg font-semibold text-white flex items-center gap-2",id:"card-groups",children:[a.jsx(Wu,{className:"w-5 h-5 text-bambu-green"}),i("settings.groups")]}),m("groups:create")&&a.jsxs(De,{size:"sm",onClick:()=>e("/groups/new"),children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.addGroup")]})]})}),a.jsx(St,{children:Es?a.jsx("div",{className:"flex items-center justify-center py-8",children:a.jsx(mt,{className:"w-6 h-6 text-bambu-green animate-spin"})}):ka.length===0?a.jsx("p",{className:"text-center text-bambu-gray py-8",children:i("settings.noGroupsFound")}):a.jsx("div",{className:"divide-y divide-bambu-dark-tertiary",children:ka.map(_e=>a.jsxs("div",{className:"py-3",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(Wu,{className:`w-4 h-4 ${_e.name==="Administrators"?"text-purple-400":_e.name==="Operators"?"text-blue-400":_e.name==="Viewers"?"text-green-400":"text-bambu-gray"}`}),a.jsx("span",{className:"text-white font-medium",children:_e.name}),_e.is_system&&a.jsx("span",{className:"px-2 py-0.5 rounded text-xs bg-yellow-500/20 text-yellow-400",children:i("settings.system")})]}),a.jsxs("div",{className:"flex items-center gap-1",children:[m("groups:update")&&a.jsx(De,{size:"sm",variant:"ghost",onClick:()=>e(`/groups/${_e.id}/edit`),children:a.jsx(Ju,{className:"w-4 h-4"})}),m("groups:delete")&&!_e.is_system&&a.jsx(De,{size:"sm",variant:"ghost",onClick:()=>Tt(_e.id),children:a.jsx(Zt,{className:"w-4 h-4"})})]})]}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1 ml-6",children:_e.description||i("settings.noDescription")}),a.jsxs("div",{className:"flex items-center gap-4 mt-2 ml-6 text-xs text-bambu-gray",children:[a.jsx("span",{children:i("settings.userCount",{count:_e.user_count})}),a.jsx("span",{children:i("settings.permissionCount",{count:_e.permissions.length})})]})]},_e.id))})})]})})]}),!l&&a.jsx(wt,{children:a.jsx(St,{className:"py-6",children:a.jsxs("div",{className:"text-center",children:[a.jsx(D0,{className:"w-12 h-12 text-bambu-gray mx-auto mb-4"}),a.jsx("h3",{className:"text-lg font-medium text-white mb-2",children:i("settings.authDisabledTitle")}),a.jsx("p",{className:"text-sm text-bambu-gray mb-4 max-w-md mx-auto",children:i("settings.authDisabledMessage")}),a.jsxs("ul",{className:"space-y-2 text-sm text-bambu-gray mb-6 text-left max-w-xs mx-auto",children:[a.jsxs("li",{className:"flex items-start gap-2",children:[a.jsx(wr,{className:"w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0"}),a.jsx("span",{children:i("settings.authDisabledFeature1")})]}),a.jsxs("li",{className:"flex items-start gap-2",children:[a.jsx(wr,{className:"w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0"}),a.jsx("span",{children:i("settings.authDisabledFeature2")})]}),a.jsxs("li",{className:"flex items-start gap-2",children:[a.jsx(wr,{className:"w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0"}),a.jsx("span",{children:i("settings.authDisabledFeature3")})]})]}),a.jsxs(De,{onClick:()=>e("/setup"),children:[a.jsx(Nd,{className:"w-4 h-4"}),i("settings.enableAuthentication")]})]})})})]}),I==="email"&&a.jsx("div",{className:"max-w-5xl",id:"card-smtp",children:a.jsx(brt,{})}),I==="ldap"&&a.jsx("div",{className:"max-w-5xl",id:"card-ldap",children:a.jsx(yrt,{})}),I==="twofa"&&a.jsx("div",{className:"max-w-2xl",children:a.jsx(wrt,{})}),I==="oidc"&&d&&a.jsx("div",{className:"max-w-3xl",children:a.jsx(_rt,{})})]}),st&&!ha?.advanced_auth_enabled&&a.jsx("div",{className:"fixed inset-0 bg-black flex items-center justify-center z-50 p-4",onClick:()=>{He(!1),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:a.jsxs(wt,{className:"w-full max-w-md",onClick:_e=>_e.stopPropagation(),children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(Ku,{className:"w-5 h-5 text-bambu-green"}),a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.createUser")})]}),a.jsx(De,{variant:"ghost",size:"sm",onClick:()=>{He(!1),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:a.jsx(Bt,{className:"w-5 h-5"})})]})}),a.jsxs(St,{children:[a.jsxs("div",{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("settings.username")}),a.jsx("input",{type:"text",value:jt.username,onChange:_e=>Jt({...jt,username:_e.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("settings.enterUsername"),autoComplete:"username"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("settings.password")}),a.jsx("input",{type:"password",value:jt.password,onChange:_e=>Jt({...jt,password:_e.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("settings.enterPassword"),autoComplete:"new-password",minLength:6})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("settings.confirmPassword")}),a.jsx("input",{type:"password",value:jt.confirmPassword,onChange:_e=>Jt({...jt,confirmPassword:_e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${jt.confirmPassword&&jt.password!==jt.confirmPassword?"border-red-500":"border-bambu-dark-tertiary"}`,placeholder:i("settings.confirmPasswordPlaceholder"),autoComplete:"new-password",minLength:6}),jt.confirmPassword&&jt.password!==jt.confirmPassword&&a.jsx("p",{className:"text-red-400 text-xs mt-1",children:i("settings.passwordsDoNotMatch")})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("settings.groups")}),a.jsxs("div",{className:"space-y-2 max-h-40 overflow-y-auto p-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg",children:[ka.map(_e=>a.jsxs("label",{className:"flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-tertiary cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:jt.group_ids.includes(_e.id),onChange:()=>od(_e.id),className:"w-4 h-4 rounded border-bambu-gray text-bambu-green focus:ring-bambu-green focus:ring-offset-0 bg-bambu-dark"}),a.jsx("span",{className:"text-sm text-white",children:_e.name}),_e.is_system&&a.jsx("span",{className:"text-xs text-yellow-400",children:i("settings.systemBadge")})]},_e.id)),ka.length===0&&a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.noGroupsAvailable")})]})]})]}),a.jsxs("div",{className:"mt-6 flex justify-end gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{He(!1),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:i("common.cancel")}),a.jsx(De,{onClick:id,disabled:Vo.isPending||!jt.username||!jt.password||jt.password!==jt.confirmPassword||jt.password.length<6,children:Vo.isPending?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),i("settings.creating")]}):a.jsxs(a.Fragment,{children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.createUser")]})})]})]})]})}),st&&ha?.advanced_auth_enabled&&a.jsx(nrt,{formData:jt,setFormData:Jt,groups:ka,onClose:()=>{He(!1),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},onCreate:id,isCreating:Vo.isPending,isCreateButtonDisabled:Vo.isPending||!jt.username||!jt.email}),at&&Mt!==null&&a.jsx("div",{className:"fixed inset-0 bg-black flex items-center justify-center z-50 p-4",onClick:()=>{ht(!1),qt(null),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:a.jsxs(wt,{className:"w-full max-w-md",onClick:_e=>_e.stopPropagation(),children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(Ju,{className:"w-5 h-5 text-bambu-green"}),a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.editUser")})]}),a.jsx(De,{variant:"ghost",size:"sm",onClick:()=>{ht(!1),qt(null),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:a.jsx(Bt,{className:"w-5 h-5"})})]})}),a.jsxs(St,{children:[a.jsxs("div",{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm font-medium text-white mb-2",children:[i("settings.username")," ",ha?.advanced_auth_enabled&&a.jsx("span",{className:"text-red-400",children:"*"})]}),a.jsx("input",{type:"text",value:jt.username,onChange:_e=>Jt({...jt,username:_e.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("settings.enterUsername"),autoComplete:"username"})]}),a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm font-medium text-white mb-2",children:[i("users.form.email")||"Email"," ",ha?.advanced_auth_enabled?a.jsx("span",{className:"text-red-400",children:"*"}):a.jsxs("span",{className:"text-bambu-gray font-normal",children:["(",i("users.form.optional")||"optional",")"]})]}),a.jsx("input",{type:"email",value:jt.email,onChange:_e=>Jt({...jt,email:_e.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("users.form.emailPlaceholder")||"user@example.com",required:ha?.advanced_auth_enabled})]}),!ha?.advanced_auth_enabled&&a.jsxs(a.Fragment,{children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm font-medium text-white mb-2",children:[i("users.form.password")||"Password"," ",a.jsxs("span",{className:"text-bambu-gray font-normal",children:["(",i("users.form.leaveBlankToKeep")||"leave blank to keep current",")"]})]}),a.jsx("input",{type:"password",value:jt.password,onChange:_e=>Jt({...jt,password:_e.target.value,confirmPassword:""}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("settings.enterNewPassword"),autoComplete:"new-password",minLength:6})]}),jt.password&&a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("settings.confirmPassword")}),a.jsx("input",{type:"password",value:jt.confirmPassword,onChange:_e=>Jt({...jt,confirmPassword:_e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${jt.confirmPassword&&jt.password!==jt.confirmPassword?"border-red-500":"border-bambu-dark-tertiary"}`,placeholder:i("settings.confirmNewPassword"),autoComplete:"new-password",minLength:6}),jt.confirmPassword&&jt.password!==jt.confirmPassword&&a.jsx("p",{className:"text-red-400 text-xs mt-1",children:i("settings.passwordsDoNotMatch")})]})]}),ha?.advanced_auth_enabled&&a.jsxs("div",{className:"bg-bambu-dark-secondary/50 border border-bambu-green/20 rounded-lg p-3 space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("users.form.passwordManagedByAdvancedAuth")||'Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.'}),a.jsx(De,{variant:"secondary",size:"sm",onClick:()=>Mt&&ad.mutate(Mt),disabled:ad.isPending||!jt.email,className:"w-full",children:ad.isPending?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),i("users.form.resettingPassword")||"Resetting Password..."]}):a.jsxs(a.Fragment,{children:[a.jsx(Ts,{className:"w-4 h-4"}),i("users.form.resetPassword")||"Reset Password"]})})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("users.form.groups")||"Groups"}),a.jsx("div",{className:"space-y-2 max-h-40 overflow-y-auto p-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg",children:ka.map(_e=>a.jsxs("label",{className:"flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-tertiary cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:jt.group_ids.includes(_e.id),onChange:()=>od(_e.id),className:"w-4 h-4 rounded border-bambu-gray text-bambu-green focus:ring-bambu-green focus:ring-offset-0 bg-bambu-dark"}),a.jsx("span",{className:"text-sm text-white",children:_e.name}),_e.is_system&&a.jsxs("span",{className:"text-xs text-yellow-400",children:["(",i("users.system")||"System",")"]})]},_e.id))})]})]}),a.jsxs("div",{className:"mt-6 flex justify-end gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{ht(!1),qt(null),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:i("users.modal.cancel")||"Cancel"}),a.jsx(De,{onClick:()=>Om(Mt),disabled:wc.isPending||!jt.username||ha?.advanced_auth_enabled&&!jt.email||!!(!ha?.advanced_auth_enabled&&jt.password&&(jt.password!==jt.confirmPassword||jt.password.length<6)),children:wc.isPending?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),i("users.modal.saving")||"Saving..."]}):a.jsxs(a.Fragment,{children:[a.jsx(Ji,{className:"w-4 h-4"}),i("users.modal.saveChanges")||"Save Changes"]})})]})]})]})}),Vt!==null&&a.jsx("div",{className:"fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-4",onClick:()=>{Gt(null),an(null)},children:a.jsxs(wt,{className:"w-full max-w-md",onClick:_e=>_e.stopPropagation(),children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center gap-2 text-red-400",children:[a.jsx(Zt,{className:"w-5 h-5"}),a.jsx("h3",{className:"text-lg font-semibold",children:i("settings.deleteUserTitle")})]})}),a.jsx(St,{className:"space-y-3",children:mn?a.jsx("div",{className:"flex items-center justify-center py-4",children:a.jsx("div",{className:"animate-spin rounded-full h-6 w-6 border-2 border-bambu-green border-t-transparent"})}):Qt&&Qt.archives+Qt.queue_items+Qt.library_files>0?a.jsxs(a.Fragment,{children:[a.jsx("p",{className:"text-white",children:i("settings.userHasCreated")}),a.jsxs("ul",{className:"list-disc list-inside text-bambu-gray space-y-1",children:[Qt.archives>0&&a.jsxs("li",{children:[Qt.archives," archive",Qt.archives!==1?"s":""]}),Qt.queue_items>0&&a.jsxs("li",{children:[Qt.queue_items," queue item",Qt.queue_items!==1?"s":""]}),Qt.library_files>0&&a.jsxs("li",{children:[Qt.library_files," library file",Qt.library_files!==1?"s":""]})]}),a.jsx("p",{className:"text-bambu-gray text-sm",children:i("settings.userItemsQuestion")}),a.jsxs("div",{className:"flex flex-col gap-2",children:[a.jsx(De,{variant:"danger",onClick:()=>Sl.mutate({id:Vt,deleteItems:!0}),disabled:Sl.isPending,className:"justify-center",children:i("settings.deleteUserAndItems")}),a.jsx(De,{variant:"secondary",onClick:()=>Sl.mutate({id:Vt,deleteItems:!1}),disabled:Sl.isPending,className:"justify-center",children:i("settings.deleteUserKeepItems")}),a.jsx(De,{variant:"ghost",onClick:()=>{Gt(null),an(null)},disabled:Sl.isPending,className:"justify-center",children:i("common.cancel")})]})]}):a.jsxs(a.Fragment,{children:[a.jsx("p",{className:"text-white",children:i("settings.deleteUserConfirm")}),a.jsx("p",{className:"text-bambu-gray text-sm",children:i("settings.actionCannotBeUndone")}),a.jsxs("div",{className:"flex gap-2 justify-end",children:[a.jsx(De,{variant:"ghost",onClick:()=>{Gt(null),an(null)},disabled:Sl.isPending,children:i("common.cancel")}),a.jsx(De,{variant:"danger",onClick:()=>Sl.mutate({id:Vt,deleteItems:!1}),disabled:Sl.isPending,children:i("settings.deleteUserTitle")})]})]})})]})}),zt!==null&&a.jsx(yn,{title:i("settings.deleteGroupTitle"),message:i("settings.deleteGroupMessage"),confirmText:i("settings.deleteGroup"),variant:"danger",onConfirm:()=>{_l.mutate(zt),Tt(null)},onCancel:()=>Tt(null)}),O==="failure-detection"&&a.jsx("div",{id:"card-failure-detection",children:a.jsx(prt,{})}),O==="backup"&&a.jsx("div",{id:"card-backup",children:a.jsx(hrt,{})}),Ge&&a.jsx(yn,{title:i("settings.disableAuthenticationTitle"),message:i("settings.disableAuthenticationMessage"),confirmText:i("settings.disableAuthentication"),variant:"danger",onConfirm:async()=>{try{await oe.disableAuth(),o(i("settings.toast.authDisabled"),"success"),await u(),et(!1),window.location.href="/"}catch(_e){const Et=_e instanceof Error?_e.message:i("settings.toast.authDisableFailed");o(Et,"error")}},onCancel:()=>et(!1)}),ve&&a.jsx("div",{className:"fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4",onClick:()=>{Xe(!1),Ve({currentPassword:"",newPassword:"",confirmPassword:""})},children:a.jsxs(wt,{className:"w-full max-w-md",onClick:_e=>_e.stopPropagation(),children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(ao,{className:"w-5 h-5 text-bambu-green"}),a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.changePassword")})]}),a.jsx(De,{variant:"ghost",size:"sm",onClick:()=>{Xe(!1),Ve({currentPassword:"",newPassword:"",confirmPassword:""})},children:a.jsx(Bt,{className:"w-5 h-5"})})]})}),a.jsxs(St,{children:[a.jsxs("div",{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:"Current Password"}),a.jsx("input",{type:"password",value:Pe.currentPassword,onChange:_e=>Ve({...Pe,currentPassword:_e.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("settings.enterCurrentPassword"),autoComplete:"current-password"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:"New Password"}),a.jsx("input",{type:"password",value:Pe.newPassword,onChange:_e=>Ve({...Pe,newPassword:_e.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("settings.enterNewPasswordMin6"),autoComplete:"new-password",minLength:6})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:"Confirm New Password"}),a.jsx("input",{type:"password",value:Pe.confirmPassword,onChange:_e=>Ve({...Pe,confirmPassword:_e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${Pe.confirmPassword&&Pe.newPassword!==Pe.confirmPassword?"border-red-500":"border-bambu-dark-tertiary"}`,placeholder:i("settings.confirmNewPassword"),autoComplete:"new-password",minLength:6}),Pe.confirmPassword&&Pe.newPassword!==Pe.confirmPassword&&a.jsx("p",{className:"text-red-400 text-xs mt-1",children:i("settings.passwordsDoNotMatch")})]})]}),a.jsxs("div",{className:"mt-6 flex justify-end gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{Xe(!1),Ve({currentPassword:"",newPassword:"",confirmPassword:""})},children:i("common.cancel")}),a.jsx(De,{onClick:async()=>{if(Pe.newPassword!==Pe.confirmPassword){o(i("settings.toast.passwordsDoNotMatch"),"error");return}if(Pe.newPassword.length<6){o(i("settings.toast.passwordTooShort"),"error");return}de(!0);try{await oe.changePassword(Pe.currentPassword,Pe.newPassword),o(i("settings.toast.passwordChanged"),"success"),Xe(!1),Ve({currentPassword:"",newPassword:"",confirmPassword:""})}catch(_e){const Et=_e instanceof Error?_e.message:"Failed to change password";o(Et,"error")}finally{de(!1)}},disabled:we||!Pe.currentPassword||!Pe.newPassword||Pe.newPassword!==Pe.confirmPassword||Pe.newPassword.length<6,children:we?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),i("settings.changing")]}):a.jsxs(a.Fragment,{children:[a.jsx(ao,{className:"w-4 h-4"}),i("settings.changePassword")]})})]})]})]})})]})]})]})})}const cce=t=>{const e=parseFloat(t);return(Math.trunc(e*1e3)/1e3).toFixed(3)},Ert=t=>t.startsWith("HH")?"HF":"S",Drt=t=>{const e=t.match(/^([A-Z]{2}\d{2})/);return e?e[1]:"HH00"},dce=t=>{const e=["High Flow_","High Flow ","Standard_","Standard ","HF_","HF ","S_","S "];for(const r of e)if(t.startsWith(r))return t.slice(r.length);const n=t.indexOf("_");return n>0?t.slice(n+1):t};function z3({profile:t,onEdit:e,onCopy:n,selectionMode:r,isSelected:i,onToggleSelect:s,note:o}){const l=Ert(t.nozzle_id),c=t.nozzle_diameter,d=()=>{r&&s?s():e()};return a.jsxs("div",{className:"flex items-center gap-2",children:[r&&a.jsx("button",{onClick:s,className:"text-bambu-gray hover:text-white transition-colors p-1",children:i?a.jsx(As,{className:"w-4 h-4 text-bambu-green"}):a.jsx(mo,{className:"w-4 h-4"})}),a.jsxs("button",{onClick:d,className:`flex-1 text-left px-3 py-2 bg-bambu-dark rounded hover:bg-bambu-dark-tertiary transition-colors ${i?"ring-1 ring-bambu-green":""}`,children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("span",{className:"text-bambu-green font-mono text-sm font-bold whitespace-nowrap",children:cce(t.k_value)}),a.jsx("span",{className:"text-white text-sm truncate flex-1",title:t.name,children:t.name||"Unnamed"}),o&&a.jsx("span",{title:"Has note",children:a.jsx(pJ,{className:"w-3 h-3 text-yellow-500"})}),a.jsxs("span",{className:"text-xs text-bambu-gray whitespace-nowrap",children:[l," ",c]})]}),o&&a.jsxs("div",{className:"text-xs mt-0.5 truncate text-yellow-500/70",title:o,children:["Note: ",o.length>50?o.substring(0,50)+"...":o]})]}),!r&&n&&a.jsx("button",{onClick:u=>{u.stopPropagation(),n()},className:"text-bambu-gray hover:text-white transition-colors p-1",title:"Copy profile",children:a.jsx(ns,{className:"w-4 h-4"})})]})}function U3({profile:t,printerId:e,nozzleDiameter:n,existingProfiles:r=[],builtinFilaments:i=[],isDualNozzle:s=!1,initialNote:o="",initialNoteKey:l=null,onClose:c,onSave:d,onSaveNote:u,hasPermission:m}){const{t:p}=_t(),{showToast:f}=rn(),[x,v]=w.useState(t?.name||""),[b,g]=w.useState(t?.k_value?cce(t.k_value):"0.020"),[S,N]=w.useState(t?.filament_id||""),[P,C]=w.useState(t?.nozzle_id?Drt(t.nozzle_id):"HH00"),[A,T]=w.useState(t?.nozzle_diameter||n),[F,k]=w.useState(t?[t.extruder_id]:s?[0,1]:[0]),[E,$]=w.useState(!1),[z,X]=w.useState({current:0,total:0}),[R,ne]=w.useState(o),re=la.useMemo(()=>{const pe=new Map;for(const fe of i)pe.set(fe.filament_id,fe.name);const be=new Map;for(const fe of r)if(fe.filament_id&&!be.has(fe.filament_id)){const Y=pe.get(fe.filament_id)||dce(fe.name||"");be.set(fe.filament_id,{id:fe.filament_id,name:Y||fe.filament_id})}return Array.from(be.values()).sort((fe,B)=>fe.name.localeCompare(B.name))},[r,i]),J=ot({mutationFn:pe=>(console.log("[KProfile] Calling API..."),oe.setKProfile(e,pe)),onSuccess:pe=>{if(console.log("[KProfile] Save success:",pe),f(p("kProfiles.toast.profileSaved")),u&&R!==o){let be;R===""&&l?be=l:t&&t.slot_id>0?be=t.setting_id||`slot_${t.slot_id}_${t.filament_id}_${t.extruder_id}`:be=`name_${x}_${S}`,u(be,R)}$(!0),setTimeout(()=>{$(!1),d()},2500)},onError:pe=>{console.error("[KProfile] Save error:",pe),f(pe.message,"error"),$(!1)}}),ue=ot({mutationFn:pe=>(console.log("[KProfile] Deleting profile..."),oe.deleteKProfile(e,pe)),onSuccess:pe=>{console.log("[KProfile] Delete success:",pe),f(p("kProfiles.toast.profileDeleted")),$(!0),setTimeout(()=>{$(!1),c()},4e3)},onError:pe=>{console.error("[KProfile] Delete error:",pe),f(pe.message,"error"),$(!1)}}),[ie,se]=w.useState(!1),K=()=>{t&&ue.mutate({slot_id:t.slot_id,extruder_id:t.extruder_id,nozzle_id:t.nozzle_id,nozzle_diameter:t.nozzle_diameter,filament_id:t.filament_id,setting_id:t.setting_id})},ae=async pe=>{if(pe.preventDefault(),s&&!t&&F.length===0){f(p("kProfiles.toast.selectAtLeastOneExtruder"),"error");return}const be=parseFloat(b).toFixed(6),fe=`${P}-${A}`;if(t||F.length===1){const Y={name:x,k_value:be,filament_id:S,nozzle_id:fe,nozzle_diameter:A,extruder_id:t?t.extruder_id:F[0],setting_id:t?.setting_id,slot_id:t?.slot_id??0};console.log("[KProfile] Saving profile:",Y),J.mutate(Y);return}$(!0),X({current:1,total:F.length});const B=F.map(Y=>({name:x,k_value:be,filament_id:S,nozzle_id:fe,nozzle_diameter:A,extruder_id:Y,setting_id:void 0,slot_id:0}));console.log(`[KProfile] Saving ${B.length} profiles in batch:`,B);try{if(await oe.setKProfilesBatch(e,B),f(p("kProfiles.toast.profilesSaved",{count:F.length})),u&&R){const Y=`name_${x}_${S}`;u(Y,R)}}catch(Y){console.error("[KProfile] Failed to save batch:",Y),f(p("kProfiles.toast.failedToSaveBatch"),"error"),$(!1),X({current:0,total:0});return}X({current:F.length,total:F.length}),setTimeout(()=>{$(!1),X({current:0,total:0}),d()},3e3)};return a.jsxs("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4",children:[a.jsxs(wt,{className:"w-full max-w-md relative",children:[E&&a.jsxs("div",{className:"absolute inset-0 bg-bambu-dark-secondary/90 flex flex-col items-center justify-center z-10 rounded-lg",children:[a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin mb-3"}),a.jsx("p",{className:"text-white font-medium",children:z.total>1?p("kProfiles.modal.savingExtruder",{current:z.current,total:z.total}):p("kProfiles.modal.syncing")}),a.jsx("p",{className:"text-bambu-gray text-sm mt-1",children:p("kProfiles.modal.pleaseWait")})]}),a.jsxs(St,{className:"p-0",children:[a.jsxs("div",{className:"flex items-center justify-between p-4 border-b border-bambu-dark-tertiary",children:[a.jsx("h2",{className:"text-xl font-semibold text-white",children:p(t?"kProfiles.modal.editTitle":"kProfiles.modal.addTitle")}),a.jsx("button",{onClick:c,className:"text-bambu-gray hover:text-white transition-colors",disabled:E,children:a.jsx(Bt,{className:"w-5 h-5"})})]}),a.jsxs("form",{onSubmit:ae,className:"p-4 space-y-4",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p("kProfiles.modal.profileName")}),a.jsx("input",{type:"text",value:x,onChange:pe=>v(pe.target.value),disabled:!!t,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${t?"opacity-60 cursor-not-allowed":""}`,placeholder:p("kProfiles.modal.profileNamePlaceholder"),required:!t})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p("kProfiles.modal.kValue")}),a.jsx("input",{type:"text",inputMode:"decimal",value:b,onChange:pe=>{const be=pe.target.value;(be===""||/^\d*\.?\d*$/.test(be))&&g(be)},onBlur:pe=>{const be=parseFloat(pe.target.value);isNaN(be)||g((Math.trunc(be*1e3)/1e3).toFixed(3))},className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none font-mono",placeholder:p("kProfiles.modal.kValuePlaceholder"),required:!0}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:p("kProfiles.modal.kValueHelp")})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p("kProfiles.modal.filament")}),a.jsxs("select",{value:S,onChange:pe=>{const be=pe.target.value;if(N(be),!t&&be&&!x){const fe=re.find(B=>B.id===be);fe&&v(`${P==="HH00"?"HF":"S"} ${fe.name}`)}},disabled:!!t,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${t?"opacity-60 cursor-not-allowed":""}`,required:!t,children:[a.jsx("option",{value:"",children:p("kProfiles.modal.selectFilament")}),t?.filament_id&&a.jsx("option",{value:t.filament_id,children:re.find(pe=>pe.id===t.filament_id)?.name||t.filament_id},t.filament_id),!t&&re.map(pe=>a.jsx("option",{value:pe.id,children:pe.name},pe.id))]}),!t&&re.length===0&&a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:p("kProfiles.modal.noFilamentsHelp")})]}),a.jsxs("div",{className:"grid grid-cols-2 gap-4",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p("kProfiles.modal.flowType")}),a.jsxs("select",{value:P,onChange:pe=>{const be=pe.target.value;if(C(be),!t&&S&&!x){const fe=re.find(B=>B.id===S);fe&&v(`${be==="HS00"?"HF":"S"} ${fe.name}`)}},disabled:!!t,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${t?"opacity-60 cursor-not-allowed":""}`,children:[a.jsx("option",{value:"HH00",children:p("kProfiles.modal.highFlow")}),a.jsx("option",{value:"HS00",children:p("kProfiles.modal.standard")})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p("kProfiles.modal.nozzleSize")}),a.jsxs("select",{value:A,onChange:pe=>T(pe.target.value),disabled:!!t,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${t?"opacity-60 cursor-not-allowed":""}`,children:[a.jsx("option",{value:"0.2",children:"0.2mm"}),a.jsx("option",{value:"0.4",children:"0.4mm"}),a.jsx("option",{value:"0.6",children:"0.6mm"}),a.jsx("option",{value:"0.8",children:"0.8mm"})]})]})]}),s&&a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p(t?"kProfiles.modal.extruder":"kProfiles.modal.extruders")}),t?a.jsx("div",{className:"px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white opacity-60",children:t.extruder_id===1?p("kProfiles.modal.left"):p("kProfiles.modal.right")}):a.jsxs("div",{className:"flex gap-4",children:[a.jsxs("label",{className:"flex items-center gap-2 cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:F.includes(1),onChange:pe=>{pe.target.checked?k([...F,1]):k(F.filter(be=>be!==1))},className:"w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green focus:ring-offset-0 accent-bambu-green"}),a.jsx("span",{className:"text-white",children:p("kProfiles.modal.left")})]}),a.jsxs("label",{className:"flex items-center gap-2 cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:F.includes(0),onChange:pe=>{pe.target.checked?k([...F,0]):k(F.filter(be=>be!==0))},className:"w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green focus:ring-offset-0 accent-bambu-green"}),a.jsx("span",{className:"text-white",children:p("kProfiles.modal.right")})]})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p("kProfiles.modal.notes")}),a.jsx("textarea",{value:R,onChange:pe=>ne(pe.target.value),placeholder:p("kProfiles.modal.notesPlaceholder"),rows:2,className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none resize-none"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:p("kProfiles.modal.notesHelp")})]}),a.jsxs("div",{className:"flex gap-2 pt-4",children:[t&&a.jsx(De,{type:"button",variant:"secondary",onClick:()=>se(!0),disabled:ue.isPending||E||!m("kprofiles:delete"),title:m("kprofiles:delete")?void 0:p("kProfiles.permission.noDelete"),className:"text-red-500 hover:bg-red-500/10",children:ue.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Zt,{className:"w-4 h-4"})}),a.jsx(De,{type:"button",variant:"secondary",onClick:c,disabled:E,className:"flex-1",children:p("common.cancel")}),a.jsxs(De,{type:"submit",disabled:J.isPending||E||!m(t?"kprofiles:update":"kprofiles:create"),title:m(t?"kprofiles:update":"kprofiles:create")?void 0:p(t?"kProfiles.permission.noUpdate":"kProfiles.permission.noCreate"),className:"flex-1",children:[J.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(aS,{className:"w-4 h-4"}),p("common.save")]})]})]})]})]}),ie&&a.jsx("div",{className:"fixed inset-0 bg-black/70 flex items-center justify-center z-[60]",children:a.jsx(wt,{className:"w-full max-w-sm",children:a.jsxs(St,{className:"p-6",children:[a.jsxs("div",{className:"flex items-center gap-3 mb-4",children:[a.jsx("div",{className:"w-10 h-10 rounded-full bg-red-500/20 flex items-center justify-center",children:a.jsx(Zt,{className:"w-5 h-5 text-red-500"})}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-lg font-semibold text-white",children:p("kProfiles.deleteConfirm.title")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:p("kProfiles.deleteConfirm.cannotUndo")})]})]}),a.jsx("p",{className:"text-bambu-gray mb-6",children:p("kProfiles.deleteConfirm.message",{name:t?.name})}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>se(!1),className:"flex-1",children:p("common.cancel")}),a.jsxs(De,{onClick:()=>{se(!1),K()},disabled:ue.isPending,className:"flex-1 bg-red-500 hover:bg-red-600 text-white",children:[ue.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Zt,{className:"w-4 h-4"}),p("common.delete")]})]})]})})})]})}const Bk={NOZZLE_DIAMETER:"bambusy_kprofiles_nozzle",SORT_OPTION:"bambusy_kprofiles_sort"};function Frt(){const{t}=_t(),{showToast:e}=rn(),{hasPermission:n}=gr(),[r,i]=w.useState(null),[s,o]=w.useState(()=>localStorage.getItem(Bk.NOZZLE_DIAMETER)||"0.4"),[l,c]=w.useState(null),[d,u]=w.useState(!1),[m,p]=w.useState(null),[f,x]=w.useState(""),[v,b]=w.useState("all"),[g,S]=w.useState("all"),[N,P]=w.useState(()=>localStorage.getItem(Bk.SORT_OPTION)||"name"),[C,A]=w.useState(!1),[T,F]=w.useState(new Set),[k,E]=w.useState(!1),[$,z]=w.useState(!1),X=w.useCallback(L=>`${L.slot_id}_${L.extruder_id}`,[]);w.useEffect(()=>{localStorage.setItem(Bk.NOZZLE_DIAMETER,s)},[s]),w.useEffect(()=>{localStorage.setItem(Bk.SORT_OPTION,N)},[N]);const{data:R,isLoading:ne}=Qe({queryKey:["printers"],queryFn:oe.getPrinters}),{data:re,isLoading:J,isFetching:ue,error:ie,refetch:se}=Qe({queryKey:["kprofiles",r,s],queryFn:async()=>{console.log("[KProfiles] Fetching profiles for printer",r,"nozzle",s);const L=await oe.getKProfiles(r,s);return console.log("[KProfiles] Received profiles:",L?.profiles?.length||0,"profiles"),L},enabled:!!r,retry:!1,staleTime:0,gcTime:0,refetchOnMount:"always"}),{data:K}=Qe({queryKey:["kprofiles",r,"0.4"],queryFn:()=>oe.getKProfiles(r,"0.4"),enabled:!!r,staleTime:6e4}),{data:ae}=Qe({queryKey:["builtinFilaments"],queryFn:()=>oe.getBuiltinFilaments(),staleTime:3e5}),{data:pe}=Qe({queryKey:["filamentIdMap"],queryFn:()=>oe.getFilamentIdMap(),staleTime:3e5}),{data:be,refetch:fe}=Qe({queryKey:["kprofile-notes",r],queryFn:()=>oe.getKProfileNotes(r),enabled:!!r,staleTime:3e4}),B=ie?.message?.includes("not connected");w.useEffect(()=>{if(!r&&R&&R.length>0){const L=R.find(ee=>ee.is_active);L&&i(L.id)}},[r,R]),w.useEffect(()=>{if(r){const L=setTimeout(()=>{se()},150);return()=>clearTimeout(L)}},[r,s]);const Y=R?.filter(L=>L.is_active)||[],D=la.useMemo(()=>{const L=new Map;if(ae)for(const ee of ae)L.set(ee.filament_id,ee.name);if(pe)for(const[ee,ge]of Object.entries(pe))L.has(ee)||L.set(ee,ge);return L},[ae,pe]),M=la.useMemo(()=>Array.from(D.entries()).map(([L,ee])=>({filament_id:L,name:ee})),[D]),U=la.useCallback(L=>D.get(L.filament_id)||dce(L.name),[D]),Q=la.useMemo(()=>re?.profiles?re.profiles.filter(ee=>{const ge=f.toLowerCase(),ke=!ge||ee.name.toLowerCase().includes(ge)||ee.filament_id.toLowerCase().includes(ge),je=v==="all"||v==="left"&&ee.extruder_id===1||v==="right"&&ee.extruder_id===0,Te=g==="all"||g==="hf"&&ee.nozzle_id.startsWith("HH")||g==="s"&&ee.nozzle_id.startsWith("HS");return ke&&je&&Te}).sort((ee,ge)=>{switch(N){case"k_value":return parseFloat(ee.k_value)-parseFloat(ge.k_value);case"filament":return U(ee).localeCompare(U(ge));default:return ee.name.localeCompare(ge.name)}}):[],[re?.profiles,f,v,g,N,U]),O=R?.find(L=>L.id===r),ce=O?.nozzle_count===2;w.useEffect(()=>{const L=ee=>{ee.target instanceof HTMLInputElement||ee.target instanceof HTMLTextAreaElement||ee.target instanceof HTMLSelectElement||l||d||m||(ee.key==="r"||ee.key==="R"?(ee.preventDefault(),se()):ee.key==="n"||ee.key==="N"?(ee.preventDefault(),u(!0)):ee.key==="Escape"&&C&&(ee.preventDefault(),A(!1),F(new Set)))};return window.addEventListener("keydown",L),()=>window.removeEventListener("keydown",L)},[l,d,m,C,se]);const I=w.useCallback(()=>{if(!re?.profiles||re.profiles.length===0){e(t("kProfiles.toast.noProfilesToExport"),"error");return}const L={version:1,exported_at:new Date().toISOString(),printer:O?.name||"Unknown",nozzle_diameter:s,profiles:re.profiles.map(je=>({name:je.name,k_value:je.k_value,filament_id:je.filament_id,nozzle_id:je.nozzle_id,nozzle_diameter:je.nozzle_diameter,extruder_id:je.extruder_id}))},ee=new Blob([JSON.stringify(L,null,2)],{type:"application/json"}),ge=URL.createObjectURL(ee),ke=document.createElement("a");ke.href=ge,ke.download=`kprofiles_${O?.name||"printer"}_${s}mm_${new Date().toISOString().split("T")[0]}.json`,document.body.appendChild(ke),ke.click(),document.body.removeChild(ke),URL.revokeObjectURL(ge),e(t("kProfiles.toast.exportedProfiles",{count:re.profiles.length}))},[re?.profiles,O,s,e,t]),G=w.useCallback(()=>{const L=document.createElement("input");L.type="file",L.accept=".json",L.onchange=async ee=>{const ge=ee.target.files?.[0];if(ge)try{const ke=await ge.text(),je=JSON.parse(ke);if(!je.profiles||!Array.isArray(je.profiles)){e(t("kProfiles.toast.invalidFileFormat"),"error");return}let Te=0;for(const xe of je.profiles)if(!(!xe.name||!xe.k_value||!xe.filament_id))try{await oe.setKProfile(r,{name:xe.name,k_value:parseFloat(xe.k_value).toFixed(6),filament_id:xe.filament_id,nozzle_id:xe.nozzle_id||`HH00-${s}`,nozzle_diameter:xe.nozzle_diameter||s,extruder_id:xe.extruder_id??0,slot_id:0}),Te++,await new Promise(Fe=>setTimeout(Fe,500))}catch(Fe){console.error("Failed to import profile:",xe.name,Fe)}e(t("kProfiles.toast.importedProfiles",{count:Te,total:je.profiles.length})),se()}catch(ke){console.error("Import error:",ke),e(t("kProfiles.toast.failedToParseImport"),"error")}},L.click()},[r,s,e,se,t]),q=w.useCallback(L=>{F(ee=>{const ge=new Set(ee);return ge.has(L)?ge.delete(L):ge.add(L),ge})},[]),W=w.useCallback(()=>{F(new Set(Q.map(L=>X(L))))},[Q,X]),te=w.useCallback(()=>{T.size!==0&&E(!0)},[T.size]),le=w.useCallback(async()=>{const L=Q.filter(ge=>T.has(X(ge)));z(!0);let ee=0;for(const ge of L)try{await oe.deleteKProfile(r,{slot_id:ge.slot_id,extruder_id:ge.extruder_id,nozzle_id:ge.nozzle_id,nozzle_diameter:ge.nozzle_diameter,filament_id:ge.filament_id,setting_id:ge.setting_id}),ee++,await new Promise(ke=>setTimeout(ke,300))}catch(ke){console.error("Failed to delete profile:",ge.name,ke)}e(t("kProfiles.toast.profilesDeleted",{count:ee})),z(!1),E(!1),A(!1),F(new Set),se()},[r,T,Q,e,se,X,t]),ye=w.useCallback(L=>{const ee=[];return L.setting_id&&ee.push(L.setting_id),ee.push(`slot_${L.slot_id}_${L.filament_id}_${L.extruder_id}`),ee.push(`name_${L.name}_${L.filament_id}`),ee},[]),he=w.useCallback(async(L,ee)=>{if(r)try{await oe.setKProfileNote(r,L,ee),fe()}catch(ge){console.error("Failed to save note:",ge),e(t("kProfiles.toast.failedToSaveNote"),"error")}},[r,fe,e,t]),me=w.useCallback(L=>{if(!be?.notes)return{note:"",key:null};const ee=ye(L);for(const ge of ee)if(be.notes[ge])return{note:be.notes[ge],key:ge};return{note:"",key:null}},[be,ye]),H=w.useCallback(L=>me(L).note,[me]);return ne?a.jsx("div",{className:"flex justify-center py-12",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})}):!R||R.length===0?a.jsx(wt,{children:a.jsxs(St,{className:"py-12 text-center",children:[a.jsx(Oa,{className:"w-12 h-12 text-bambu-gray mx-auto mb-4"}),a.jsx("h3",{className:"text-lg font-semibold text-white mb-2",children:t("kProfiles.noPrintersConfigured")}),a.jsx("p",{className:"text-bambu-gray",children:t("kProfiles.addPrinterInSettings")})]})}):Y.length===0?a.jsx(wt,{children:a.jsxs(St,{className:"py-12 text-center",children:[a.jsx(Mr,{className:"w-12 h-12 text-bambu-gray mx-auto mb-4"}),a.jsx("h3",{className:"text-lg font-semibold text-white mb-2",children:t("kProfiles.noActivePrinters")}),a.jsx("p",{className:"text-bambu-gray",children:t("kProfiles.enablePrinterConnection")})]})}):a.jsxs(a.Fragment,{children:[ue&&!J&&a.jsxs("div",{className:"fixed inset-0 bg-black/50 flex flex-col items-center justify-center z-40",children:[a.jsx(mt,{className:"w-10 h-10 text-bambu-green animate-spin mb-3"}),a.jsx("p",{className:"text-white font-medium",children:t("kProfiles.loadingProfiles")})]}),a.jsxs("div",{className:"flex flex-wrap gap-4 mb-6",children:[a.jsxs("div",{className:"flex-1 min-w-48",children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:t("kProfiles.printer")}),a.jsx("select",{value:r||"",onChange:L=>i(parseInt(L.target.value)),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:Y.map(L=>a.jsx("option",{value:L.id,children:L.name},L.id))})]}),a.jsxs("div",{className:"w-32",children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:t("kProfiles.nozzle")}),a.jsxs("select",{value:s,onChange:L=>o(L.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"0.2",children:"0.2mm"}),a.jsx("option",{value:"0.4",children:"0.4mm"}),a.jsx("option",{value:"0.6",children:"0.6mm"}),a.jsx("option",{value:"0.8",children:"0.8mm"})]})]}),a.jsxs("div",{className:"flex items-end gap-2",children:[a.jsxs(De,{variant:"secondary",onClick:()=>se(),disabled:ue||!n("kprofiles:read"),title:n("kprofiles:read")?void 0:t("kProfiles.permission.noRead"),children:[a.jsx(sr,{className:`w-4 h-4 ${ue?"animate-spin":""}`}),t("kProfiles.refresh")]}),a.jsxs(De,{onClick:()=>u(!0),disabled:!n("kprofiles:create"),title:n("kprofiles:create")?void 0:t("kProfiles.permission.noCreate"),children:[a.jsx(nr,{className:"w-4 h-4"}),t("kProfiles.addProfile")]})]})]}),a.jsxs("div",{className:"flex flex-wrap gap-4 mb-4",children:[a.jsxs("div",{className:"flex-1 min-w-48 relative",children:[a.jsx(Nr,{className:"absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray"}),a.jsx("input",{type:"text",value:f,onChange:L=>x(L.target.value),placeholder:t("kProfiles.searchPlaceholder"),className:"w-full pl-10 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none"})]}),ce&&a.jsx("div",{className:"w-36",children:a.jsxs("select",{value:v,onChange:L=>b(L.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"all",children:t("kProfiles.allExtruders")}),a.jsx("option",{value:"left",children:t("kProfiles.leftOnly")}),a.jsx("option",{value:"right",children:t("kProfiles.rightOnly")})]})}),a.jsx("div",{className:"w-32",children:a.jsxs("select",{value:g,onChange:L=>S(L.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"all",children:t("kProfiles.allFlow")}),a.jsx("option",{value:"hf",children:t("kProfiles.hfOnly")}),a.jsx("option",{value:"s",children:t("kProfiles.sOnly")})]})}),a.jsx("div",{className:"w-32",children:a.jsxs("select",{value:N,onChange:L=>P(L.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"name",children:t("kProfiles.sortName")}),a.jsx("option",{value:"k_value",children:t("kProfiles.sortKValue")}),a.jsx("option",{value:"filament",children:t("kProfiles.sortFilament")})]})})]}),a.jsxs("div",{className:"flex flex-wrap gap-2 mb-6",children:[a.jsxs(De,{variant:"secondary",onClick:I,disabled:!re?.profiles?.length||!n("kprofiles:read"),title:n("kprofiles:read")?void 0:t("kProfiles.permission.noExport"),children:[a.jsx(aa,{className:"w-4 h-4"}),t("kProfiles.export")]}),a.jsxs(De,{variant:"secondary",onClick:G,disabled:!n("kprofiles:create"),title:n("kprofiles:create")?void 0:t("kProfiles.permission.noImport"),children:[a.jsx(_a,{className:"w-4 h-4"}),t("kProfiles.import")]}),a.jsx("div",{className:"flex-1"}),C?a.jsxs(a.Fragment,{children:[a.jsxs(De,{variant:"secondary",onClick:W,children:[a.jsx(As,{className:"w-4 h-4"}),t("kProfiles.selectAll")]}),a.jsxs(De,{variant:"secondary",onClick:te,disabled:T.size===0||!n("kprofiles:delete"),className:"text-red-500 hover:bg-red-500/10",title:n("kprofiles:delete")?void 0:t("kProfiles.permission.noDelete"),children:[a.jsx(Zt,{className:"w-4 h-4"}),t("kProfiles.delete")," (",T.size,")"]}),a.jsxs(De,{variant:"secondary",onClick:()=>{A(!1),F(new Set)},children:[a.jsx(Bt,{className:"w-4 h-4"}),t("common.cancel")]})]}):a.jsxs(De,{variant:"secondary",onClick:()=>A(!0),disabled:!Q.length||!n("kprofiles:delete"),title:n("kprofiles:delete")?void 0:t("kProfiles.permission.noDelete"),children:[a.jsx(As,{className:"w-4 h-4"}),t("kProfiles.select")]})]}),J?a.jsx("div",{className:"flex justify-center py-12",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})}):B?a.jsx(wt,{children:a.jsxs(St,{className:"py-12 text-center",children:[a.jsx(qd,{className:"w-12 h-12 text-bambu-gray mx-auto mb-4"}),a.jsx("h3",{className:"text-lg font-semibold text-white mb-2",children:t("kProfiles.printerOffline")}),a.jsx("p",{className:"text-bambu-gray mb-4",children:t("kProfiles.printerOfflineDesc")}),a.jsxs(De,{variant:"secondary",onClick:()=>se(),children:[a.jsx(sr,{className:"w-4 h-4"}),t("common.refresh")]})]})}):Q.length>0?ce?a.jsxs("div",{className:"grid grid-cols-2 gap-4",children:[a.jsxs("div",{children:[a.jsx("h3",{className:"text-sm font-medium text-bambu-gray mb-2 px-1",children:t("kProfiles.leftExtruder")}),a.jsx("div",{className:"space-y-1",children:Q.filter(L=>L.extruder_id===1).map(L=>a.jsx(z3,{profile:L,onEdit:()=>c(L),onCopy:()=>p(L),selectionMode:C,isSelected:T.has(X(L)),onToggleSelect:()=>q(X(L)),note:H(L)},X(L)))})]}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-sm font-medium text-bambu-gray mb-2 px-1",children:t("kProfiles.rightExtruder")}),a.jsx("div",{className:"space-y-1",children:Q.filter(L=>L.extruder_id===0).map(L=>a.jsx(z3,{profile:L,onEdit:()=>c(L),onCopy:()=>p(L),selectionMode:C,isSelected:T.has(X(L)),onToggleSelect:()=>q(X(L)),note:H(L)},X(L)))})]})]}):a.jsx("div",{className:"space-y-1",children:Q.map(L=>a.jsx(z3,{profile:L,onEdit:()=>c(L),onCopy:()=>p(L),selectionMode:C,isSelected:T.has(X(L)),onToggleSelect:()=>q(X(L)),note:H(L)},X(L)))}):f||v!=="all"||g!=="all"?a.jsx(wt,{children:a.jsxs(St,{className:"py-12 text-center",children:[a.jsx(Nr,{className:"w-12 h-12 text-bambu-gray mx-auto mb-4"}),a.jsx("h3",{className:"text-lg font-semibold text-white mb-2",children:t("kProfiles.noMatchingProfiles")}),a.jsx("p",{className:"text-bambu-gray",children:t("kProfiles.noMatchingProfilesDesc")})]})}):a.jsx(wt,{children:a.jsxs(St,{className:"py-12 text-center",children:[a.jsx(aS,{className:"w-12 h-12 text-bambu-gray mx-auto mb-4"}),a.jsx("h3",{className:"text-lg font-semibold text-white mb-2",children:t("kProfiles.noKProfiles")}),a.jsx("p",{className:"text-bambu-gray mb-4",children:t("kProfiles.noKProfilesDesc",{diameter:s})}),a.jsxs(De,{onClick:()=>u(!0),children:[a.jsx(nr,{className:"w-4 h-4"}),t("kProfiles.createFirstProfile")]})]})}),l&&r&&(()=>{const{note:L,key:ee}=me(l);return a.jsx(U3,{profile:l,printerId:r,nozzleDiameter:s,existingProfiles:K?.profiles||re?.profiles,builtinFilaments:M,isDualNozzle:ce,initialNote:L,initialNoteKey:ee,onSaveNote:he,hasPermission:n,onClose:()=>{console.log("[KProfiles] Edit modal onClose - refetching profiles..."),c(null),se()},onSave:()=>{c(null),se()}})})(),d&&r&&a.jsx(U3,{printerId:r,nozzleDiameter:s,existingProfiles:K?.profiles||re?.profiles,builtinFilaments:M,isDualNozzle:ce,onSaveNote:he,hasPermission:n,onClose:()=>{u(!1),se()},onSave:()=>{u(!1),se()}}),m&&r&&a.jsx(U3,{printerId:r,nozzleDiameter:s,existingProfiles:K?.profiles||re?.profiles,builtinFilaments:M,isDualNozzle:ce,onSaveNote:he,hasPermission:n,profile:{...m,slot_id:0,name:`${m.name} (Copy)`},onClose:()=>{p(null),se()},onSave:()=>{p(null),se()}}),k&&a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4",children:a.jsx(wt,{className:"w-full max-w-sm",children:a.jsxs(St,{className:"p-6",children:[a.jsxs("div",{className:"flex items-center gap-3 mb-4",children:[a.jsx("div",{className:"w-10 h-10 rounded-full bg-red-500/20 flex items-center justify-center",children:a.jsx(Zt,{className:"w-5 h-5 text-red-500"})}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-lg font-semibold text-white",children:t("kProfiles.bulkDelete.title")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:t("kProfiles.bulkDelete.cannotUndo")})]})]}),a.jsx("p",{className:"text-bambu-gray mb-6",children:t("kProfiles.bulkDelete.message",{count:T.size})}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>E(!1),disabled:$,className:"flex-1",children:t("common.cancel")}),a.jsxs(De,{onClick:le,disabled:$,className:"flex-1 bg-red-500 hover:bg-red-600 text-white",children:[$?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Zt,{className:"w-4 h-4"}),t("common.delete")]})]})]})})})]})}const uce=["PLA","PETG","PCTG","ABS","ASA","TPU","PC","PA","PVA","HIPS","PP","PET","NYLON"],Rrt={PLA:"E8E8E8",PETG:"4A90D9",ABS:"E67E22",ASA:"D35400",TPU:"9B59B6",PC:"BDC3C7",PA:"2ECC71",NYLON:"2ECC71",PVA:"F1C40F",HIPS:"95A5A6",PP:"ECF0F1",PET:"3498DB"};function Lrt(t){const e=t.toUpperCase();for(const n of uce)if(new RegExp(`\\b${n}\\b`).test(e))return n;return null}function Irt(t){const e=t.replace(/@.+$/,"").trim(),n=e.toUpperCase();for(const r of uce){const i=n.indexOf(r);if(i>0){const s=e.slice(0,i).trim();if(s&&s.length>1)return s}}return null}function B3({preset:t,onDelete:e,onExpand:n,isExpanded:r}){const{t:i}=_t(),{hasPermission:s}=gr(),o=t.filament_type||Lrt(t.name),l=t.filament_vendor||Irt(t.name);let c=null,d=!1;if(t.default_filament_colour)try{const u=JSON.parse(t.default_filament_colour),m=Array.isArray(u)?u[0]:u;typeof m=="string"&&/^#?[0-9a-fA-F]{6,8}$/.test(m.replace("#",""))&&(c=m.replace("#","").slice(0,6),d=!0)}catch{const u=t.default_filament_colour;/^#?[0-9a-fA-F]{6,8}$/.test(u.replace("#",""))&&(c=u.replace("#","").slice(0,6),d=!0)}return!c&&o&&(c=Rrt[o.toUpperCase()]||null),a.jsx(wt,{className:"bg-bambu-dark border-bambu-dark-tertiary hover:border-bambu-dark-tertiary/80 transition-colors",children:a.jsxs(St,{className:"p-3",children:[a.jsxs("div",{className:"flex items-start justify-between gap-2",children:[a.jsxs("div",{className:"flex-1 min-w-0",children:[a.jsxs("div",{className:"flex items-center gap-2 mb-1",children:[t.preset_type==="filament"&&a.jsx("div",{className:`w-4 h-4 rounded-full border border-black/20 flex-shrink-0 ${!d&&!c?"opacity-25":d?"":"opacity-50"}`,style:{backgroundColor:c?`#${c}`:"#666"}}),a.jsx("span",{className:"text-sm font-medium text-white truncate",children:t.name})]}),a.jsxs("div",{className:"flex items-center gap-2 flex-wrap",children:[o&&a.jsx("span",{className:"text-xs px-1.5 py-0.5 rounded bg-bambu-green/20 text-bambu-green",children:o}),l&&a.jsx("span",{className:"text-xs text-bambu-gray",children:l}),a.jsx("span",{className:"text-xs px-1.5 py-0.5 rounded bg-blue-500/20 text-blue-400",children:i("profiles.localProfiles.badge")})]})]}),a.jsxs("div",{className:"flex items-center gap-1 flex-shrink-0",children:[s("settings:update")&&a.jsx("button",{onClick:()=>e(t.id),className:"p-1 text-bambu-gray hover:text-red-400 transition-colors",title:i("profiles.localProfiles.delete"),children:a.jsx(Zt,{className:"w-3.5 h-3.5"})}),a.jsx("button",{onClick:()=>n(r?null:t.id),className:"p-1 text-bambu-gray hover:text-white transition-colors",children:r?a.jsx(lc,{className:"w-3.5 h-3.5"}):a.jsx(zn,{className:"w-3.5 h-3.5"})})]})]}),r&&a.jsxs("div",{className:"mt-3 pt-3 border-t border-bambu-dark-tertiary text-xs space-y-1.5",children:[o&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.filamentType")}),a.jsx("span",{className:"text-white",children:o})]}),l&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.vendor")}),a.jsx("span",{className:"text-white",children:l})]}),t.nozzle_temp_min!=null&&t.nozzle_temp_max!=null&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.nozzleTemp")}),a.jsxs("span",{className:"text-white",children:[t.nozzle_temp_min,"–",t.nozzle_temp_max,"°C"]})]}),t.filament_cost&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.cost")}),a.jsx("span",{className:"text-white",children:t.filament_cost})]}),t.filament_density&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.density")}),a.jsxs("span",{className:"text-white",children:[t.filament_density," g/cm³"]})]}),t.pressure_advance&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.pressureAdvance")}),a.jsx("span",{className:"text-white",children:t.pressure_advance})]}),t.compatible_printers&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.compatiblePrinters")}),a.jsx("span",{className:"text-white truncate ml-2",children:(()=>{try{return JSON.parse(t.compatible_printers).join(", ")}catch{return t.compatible_printers}})()})]}),t.inherits&&t.inherits!==t.name&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.inheritsFrom")}),a.jsx("span",{className:"text-white truncate ml-2",children:t.inherits})]}),a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.source")}),a.jsx("span",{className:"text-white capitalize",children:t.source})]})]})]})})}function Ort(){const{t}=_t(),{hasPermission:e}=gr(),n=tn(),{showToast:r}=rn(),[i,s]=w.useState(""),[o,l]=w.useState(null),[c,d]=w.useState(!1),[u,m]=w.useState(null),{data:p,isLoading:f}=Qe({queryKey:["localPresets"],queryFn:()=>oe.getLocalPresets()}),x=ot({mutationFn:async T=>{const F=[];for(const k of Array.from(T)){const E=new FormData;E.append("file",k),F.push(await oe.importLocalPresets(E))}return F},onSuccess:T=>{n.invalidateQueries({queryKey:["localPresets"]});let F=0,k=0,E=0;for(const $ of T)F+=$.imported,k+=$.skipped,E+=$.errors.length;F>0&&r(t("profiles.localProfiles.toast.importSuccess",{count:F})),k>0&&r(t("profiles.localProfiles.toast.importSkipped",{count:k}),"warning"),E>0&&r(t("profiles.localProfiles.toast.importError",{count:E}),"error")},onError:T=>{r(T.message,"error")}}),v=ot({mutationFn:T=>oe.deleteLocalPreset(T),onSuccess:()=>{n.invalidateQueries({queryKey:["localPresets"]}),m(null),r(t("profiles.localProfiles.toast.deleted"))}}),b=w.useCallback(T=>{!T||T.length===0||x.mutate(T)},[x]),g=w.useCallback(T=>{T.preventDefault(),d(!1),b(T.dataTransfer.files)},[b]),S=w.useCallback(T=>{if(!i)return T;const F=i.toLowerCase();return T.filter(k=>k.name.toLowerCase().includes(F)||k.filament_type?.toLowerCase().includes(F)||k.filament_vendor?.toLowerCase().includes(F))},[i]),N=w.useMemo(()=>S(p?.filament||[]),[p?.filament,S]),P=w.useMemo(()=>S(p?.printer||[]),[p?.printer,S]),C=w.useMemo(()=>S(p?.process||[]),[p?.process,S]),A=N.length+P.length+C.length;return f?a.jsx("div",{className:"flex items-center justify-center py-16",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})}):a.jsxs("div",{className:"space-y-6",children:[e("settings:update")&&a.jsxs("div",{onDragOver:T=>{T.preventDefault(),d(!0)},onDragLeave:()=>d(!1),onDrop:g,className:`relative border-2 border-dashed rounded-lg p-6 text-center transition-colors ${c?"border-bambu-green bg-bambu-green/10":"border-bambu-dark-tertiary hover:border-bambu-gray"}`,children:[a.jsx("input",{type:"file",accept:".json,.zip,.orca_filament,.bbscfg,.bbsflmt",multiple:!0,className:"absolute inset-0 w-full h-full opacity-0 cursor-pointer",onChange:T=>b(T.target.files)}),x.isPending?a.jsxs("div",{className:"flex items-center justify-center gap-2",children:[a.jsx(mt,{className:"w-5 h-5 text-bambu-green animate-spin"}),a.jsx("span",{className:"text-bambu-gray",children:t("profiles.localProfiles.importing")})]}):a.jsxs(a.Fragment,{children:[a.jsx(_a,{className:"w-8 h-8 text-bambu-gray mx-auto mb-2"}),a.jsx("p",{className:"text-sm text-white font-medium",children:t("profiles.localProfiles.import")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:t("profiles.localProfiles.importDesc")})]})]}),A>0&&a.jsxs("div",{className:"relative",children:[a.jsx(Nr,{className:"absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray"}),a.jsx("input",{type:"text",value:i,onChange:T=>s(T.target.value),placeholder:t("profiles.localProfiles.search"),className:"w-full pl-9 pr-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green"})]}),A===0&&!f&&a.jsxs("div",{className:"text-center py-12",children:[a.jsx(Vg,{className:"w-12 h-12 text-bambu-gray mx-auto mb-3 opacity-50"}),a.jsx("p",{className:"text-bambu-gray",children:t("profiles.localProfiles.noPresets")}),a.jsx("p",{className:"text-xs text-bambu-gray/60 mt-1",children:t("profiles.localProfiles.importDesc")})]}),A>0&&a.jsxs("div",{className:"grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-6",children:[N.length>0&&a.jsxs("div",{children:[a.jsxs("div",{className:"flex items-center gap-2 mb-3",children:[a.jsx(QP,{className:"w-4 h-4 text-bambu-green"}),a.jsx("h3",{className:"text-sm font-medium text-white",children:t("profiles.localProfiles.filament")}),a.jsxs("span",{className:"text-xs text-bambu-gray",children:["(",N.length,")"]})]}),a.jsx("div",{className:"space-y-2",children:N.map(T=>a.jsx(B3,{preset:T,onDelete:F=>m(F),onExpand:l,isExpanded:o===T.id},T.id))})]}),C.length>0&&a.jsxs("div",{children:[a.jsxs("div",{className:"flex items-center gap-2 mb-3",children:[a.jsx(ia,{className:"w-4 h-4 text-blue-400"}),a.jsx("h3",{className:"text-sm font-medium text-white",children:t("profiles.localProfiles.process")}),a.jsxs("span",{className:"text-xs text-bambu-gray",children:["(",C.length,")"]})]}),a.jsx("div",{className:"space-y-2",children:C.map(T=>a.jsx(B3,{preset:T,onDelete:F=>m(F),onExpand:l,isExpanded:o===T.id},T.id))})]}),P.length>0&&a.jsxs("div",{children:[a.jsxs("div",{className:"flex items-center gap-2 mb-3",children:[a.jsx(Hd,{className:"w-4 h-4 text-orange-400"}),a.jsx("h3",{className:"text-sm font-medium text-white",children:t("profiles.localProfiles.printer")}),a.jsxs("span",{className:"text-xs text-bambu-gray",children:["(",P.length,")"]})]}),a.jsx("div",{className:"space-y-2",children:P.map(T=>a.jsx(B3,{preset:T,onDelete:F=>m(F),onExpand:l,isExpanded:o===T.id},T.id))})]})]}),u!==null&&a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50",children:a.jsxs("div",{className:"bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg p-6 max-w-sm mx-4",children:[a.jsxs("div",{className:"flex items-center gap-2 mb-3",children:[a.jsx(Oa,{className:"w-5 h-5 text-red-400"}),a.jsx("h3",{className:"text-white font-medium",children:t("profiles.localProfiles.deleteConfirmTitle")})]}),a.jsx("p",{className:"text-sm text-bambu-gray mb-4",children:t("profiles.localProfiles.deleteConfirm")}),a.jsxs("div",{className:"flex justify-end gap-2",children:[a.jsx(De,{variant:"secondary",size:"sm",onClick:()=>m(null),children:t("profiles.localProfiles.cancel")}),a.jsxs(De,{variant:"danger",size:"sm",onClick:()=>v.mutate(u),disabled:v.isPending,children:[v.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Zt,{className:"w-4 h-4"}),t("profiles.localProfiles.delete")]})]})]})})]})}function O5(t,e){const n=`${t} ${e||""}`,r=n.match(/@?\s*(?:BBL\s+)?(?:Bambu\s+Lab\s+)?([XPAH][1-9][A-Z]?(?:\s*(?:Carbon|mini))?|H2D)/i),i=r?r[1].trim():null,s=n.match(/(\d+\.?\d*)\s*(?:mm\s*)?nozzle|nozzle\s*(\d+\.?\d*)/i),o=s?(s[1]||s[2])+"mm":null,l=n.match(/(\d+\.?\d*)mm\s*(?:Standard|Fine|Extra Fine|Draft|Quality)?/i),c=l?l[1]+"mm":null,d=n.match(/\b(PLA|PETG|ABS|ASA|TPU|PC|PA|PVA|HIPS|PP|PET(?:-?CF)?|PA(?:-?CF)?|PLA(?:-?CF)?)\b/i),u=d?d[1].toUpperCase():null;return{printer:i,nozzle:o,layerHeight:c,filamentType:u}}function Zw(t){return/^(P[FPM]US|PF\d|PP\d)/.test(t)}function zrt({onSuccess:t,t:e}){const{showToast:n}=rn(),[r,i]=w.useState("email"),[s,o]=w.useState(""),[l,c]=w.useState(""),[d,u]=w.useState(""),[m,p]=w.useState(""),[f,x]=w.useState("global"),[v,b]=w.useState(null),[g,S]=w.useState(null),N=ot({mutationFn:()=>oe.cloudLogin(s,l,f),onSuccess:F=>{F.success?(n(e("profiles.login.toast.loggedIn")),t()):F.needs_verification?(b(F.verification_type||"email"),S(F.tfa_key||null),F.verification_type==="totp"?n(e("profiles.login.toast.enterTotp")):n(e("profiles.login.toast.codeSent")),i("code")):n(F.message,"error")},onError:F=>n(F.message,"error")}),P=ot({mutationFn:()=>oe.cloudVerify(s,d,g||void 0,f),onSuccess:F=>{F.success?(n(e("profiles.login.toast.loggedIn")),t()):n(F.message,"error")},onError:F=>n(F.message,"error")}),C=ot({mutationFn:()=>oe.cloudSetToken(m,f),onSuccess:()=>{n(e("profiles.login.toast.tokenSet")),t()},onError:F=>n(F.message,"error")}),A=F=>{F.preventDefault(),r==="email"?N.mutate():r==="code"?P.mutate():r==="token"&&C.mutate()},T=N.isPending||P.isPending||C.isPending;return a.jsx(wt,{className:"max-w-md mx-auto",children:a.jsxs(St,{children:[a.jsxs("div",{className:"text-center mb-6",children:[a.jsx("div",{className:"inline-flex items-center justify-center w-12 h-12 rounded-xl bg-bambu-green/20 mb-3",children:a.jsx(qg,{className:"w-6 h-6 text-bambu-green"})}),a.jsx("h2",{className:"text-xl font-semibold text-white",children:e("profiles.login.title")}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:e("profiles.login.subtitle")})]}),a.jsxs("form",{onSubmit:A,className:"space-y-4",children:[r==="email"&&a.jsxs(a.Fragment,{children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:e("profiles.login.email")}),a.jsx("input",{type:"email",value:s,onChange:F=>o(F.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none",placeholder:"your@email.com",required:!0})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:e("profiles.login.password")}),a.jsx("input",{type:"password",value:l,onChange:F=>c(F.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none",placeholder:"••••••••",required:!0})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:e("profiles.login.region")}),a.jsxs("select",{value:f,onChange:F=>x(F.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"global",children:e("profiles.login.regionGlobal")}),a.jsx("option",{value:"china",children:e("profiles.login.regionChina")})]})]})]}),r==="code"&&a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:e(v==="totp"?"profiles.login.totpCode":"profiles.login.verificationCode")}),a.jsx("p",{className:"text-xs text-bambu-gray mb-2",children:v==="totp"?e("profiles.login.enterTotpHint"):e("profiles.login.checkEmail",{email:s})}),a.jsx("input",{type:"text",value:d,onChange:F=>u(F.target.value.replace(/\D/g,"").slice(0,6)),className:"w-full px-3 py-3 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-center text-2xl tracking-widest font-mono focus:border-bambu-green focus:outline-none",placeholder:"000000",maxLength:6,required:!0})]}),r==="token"&&a.jsxs(a.Fragment,{children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:e("profiles.login.accessToken")}),a.jsx("p",{className:"text-xs text-bambu-gray mb-2",children:e("profiles.login.accessTokenHint")}),a.jsx("textarea",{value:m,onChange:F=>p(F.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-xs font-mono placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none resize-none",placeholder:"eyJ...",rows:4,required:!0})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:e("profiles.login.region")}),a.jsxs("select",{value:f,onChange:F=>x(F.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"global",children:e("profiles.login.regionGlobal")}),a.jsx("option",{value:"china",children:e("profiles.login.regionChina")})]})]})]}),a.jsxs("div",{className:"flex gap-2 max-[550px]:flex-wrap max-[550px]:items-center",children:[r==="code"&&a.jsx(De,{type:"button",variant:"secondary",onClick:()=>i("email"),className:"flex-1",children:e("profiles.login.back")}),a.jsxs(De,{type:"submit",disabled:T,className:"flex-1",children:[T?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(VH,{className:"w-4 h-4"}),e(r==="email"?"profiles.login.loginButton":r==="code"?"profiles.login.verifyButton":"profiles.login.setTokenButton")]})]}),r==="email"&&a.jsx("div",{className:"pt-4 border-t border-bambu-dark-tertiary",children:a.jsxs("button",{type:"button",onClick:()=>i("token"),className:"text-sm text-bambu-gray hover:text-white flex items-center gap-2 transition-colors",children:[a.jsx(ao,{className:"w-4 h-4"}),e("profiles.login.useToken")]})}),r==="token"&&a.jsx("div",{className:"pt-4 border-t border-bambu-dark-tertiary",children:a.jsxs("button",{type:"button",onClick:()=>i("email"),className:"text-sm text-bambu-gray hover:text-white flex items-center gap-2 transition-colors",children:[a.jsx(VH,{className:"w-4 h-4"}),e("profiles.login.useEmail")]})})]})]})})}function xx({label:t,value:e,options:n,onChange:r}){const[i,s]=w.useState(!1),o=n.find(l=>l.value===e);return a.jsxs("div",{className:"relative",children:[a.jsxs("button",{onClick:()=>s(!i),className:"flex items-center gap-2 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-sm text-white hover:border-bambu-gray-dark transition-colors",children:[a.jsxs("span",{className:"text-bambu-gray",children:[t,":"]}),a.jsx("span",{children:o?.label||"All"}),a.jsx(zn,{className:`w-4 h-4 text-bambu-gray transition-transform ${i?"rotate-180":""}`})]}),i&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-10",onClick:()=>s(!1)}),a.jsx("div",{className:"absolute top-full left-0 mt-1 min-w-[160px] bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-20 py-1 max-h-60 overflow-y-auto",children:n.map(l=>a.jsxs("button",{onClick:()=>{r(l.value),s(!1)},className:`w-full px-3 py-2 text-left text-sm flex items-center justify-between hover:bg-bambu-dark-tertiary transition-colors ${e===l.value?"text-bambu-green":"text-white"}`,children:[a.jsx("span",{children:l.label}),l.count!==void 0&&a.jsx("span",{className:"text-bambu-gray text-xs",children:l.count})]},l.value))})]})]})}function Urt(){const[t,e]=w.useState(!1);w.useEffect(()=>{const r=()=>{e(window.scrollY>300)};return window.addEventListener("scroll",r),()=>window.removeEventListener("scroll",r)},[]);const n=()=>{window.scrollTo({top:0,behavior:"smooth"})};return t?a.jsx("button",{onClick:n,className:"fixed bottom-6 right-6 p-3 bg-bambu-green hover:bg-bambu-green-light text-white rounded-full shadow-lg shadow-bambu-green/25 transition-all z-40","aria-label":"Scroll to top",children:a.jsx(wp,{className:"w-5 h-5"})}):null}function H3({setting:t,onClick:e,onDuplicate:n,compareMode:r,isCompareSelected:i,compareIndex:s,compareDisabled:o,t:l}){const c=O5(t.name),d=Zw(t.setting_id);return a.jsxs("div",{className:"flex items-center gap-2 group",children:[a.jsx("button",{onClick:e,disabled:o,className:`flex-1 text-left px-3 py-2 rounded transition-colors ${i?"bg-blue-500/20 border border-blue-500/50":o?"bg-bambu-dark/50 opacity-40 cursor-not-allowed":"bg-bambu-dark hover:bg-bambu-dark-tertiary"} ${r&&!o?"cursor-pointer":""}`,children:a.jsxs("div",{className:"flex items-center gap-2",children:[i&&s!==void 0&&a.jsx("span",{className:"flex-shrink-0 w-5 h-5 rounded-full bg-blue-500 text-white text-xs flex items-center justify-center font-medium",children:s+1}),!i&&d&&a.jsx("span",{className:"flex-shrink-0 w-1.5 h-1.5 rounded-full bg-bambu-green",title:l("profiles.presets.myPreset")}),a.jsx("span",{className:"text-white text-sm truncate flex-1",title:t.name,children:t.name}),c.filamentType&&t.type==="filament"&&a.jsx("span",{className:"text-xs text-bambu-gray whitespace-nowrap",children:c.filamentType}),c.layerHeight&&t.type==="process"&&a.jsx("span",{className:"text-xs text-bambu-gray whitespace-nowrap",children:c.layerHeight}),c.printer&&a.jsx("span",{className:"text-xs text-bambu-gray whitespace-nowrap",children:c.printer})]})}),a.jsx("button",{onClick:u=>{u.stopPropagation(),n()},className:"opacity-0 group-hover:opacity-100 text-bambu-gray hover:text-white transition-all p-1",title:l("profiles.presets.duplicate"),children:a.jsx(ns,{className:"w-4 h-4"})})]})}function CI(t,e=0){const n="  ".repeat(e);if(t===null)return"null";if(t===void 0)return"undefined";if(typeof t=="string"){if(t.includes("\\n")||t.includes(`
+`)),i(!0),setTimeout(()=>i(!1),2e3)};return a.jsxs("div",{className:"space-y-4",children:[a.jsx("div",{className:"bg-amber-500/10 border border-amber-500/30 rounded-lg p-4",children:a.jsx("p",{className:"text-amber-400 text-sm font-medium",children:n("settings.twoFa.backupCodesWarning")})}),a.jsx("div",{className:"grid grid-cols-2 gap-2",children:t.map((o,l)=>a.jsx("code",{className:"bg-bambu-dark-secondary rounded px-3 py-2 text-center font-mono text-sm text-white tracking-widest",children:o},l))}),a.jsxs("div",{className:"flex gap-3",children:[a.jsxs(De,{variant:"secondary",size:"sm",onClick:s,className:"flex items-center gap-2",children:[a.jsx(ns,{className:"w-4 h-4"}),n(r?"common.copied":"common.copy")]}),a.jsx(De,{variant:"primary",size:"sm",onClick:e,className:"flex-1",children:n("settings.twoFa.savedCodes")})]})]})}function vrt({onDone:t}){const{t:e}=_t(),n=tn(),{showToast:r}=rn(),[i,s]=w.useState("qr"),[o,l]=w.useState(""),[c,d]=w.useState([]),[u,m]=w.useState(!1),{data:p,isLoading:f}=Qe({queryKey:["totp-setup"],queryFn:()=>oe.setupTOTP(),staleTime:1/0}),x=ot({mutationFn:v=>oe.enableTOTP(v),onSuccess:v=>{d(v.backup_codes),s("backup"),n.invalidateQueries({queryKey:["2fa-status"]})},onError:()=>r(e("settings.twoFa.invalidCode"),"error")});return f||!p?a.jsx("div",{className:"flex items-center justify-center py-8",children:a.jsx(sr,{className:"w-6 h-6 animate-spin text-bambu-green"})}):i==="qr"?a.jsxs("div",{className:"space-y-4",children:[a.jsx("p",{className:"text-bambu-gray-light text-sm",children:e("settings.twoFa.setupInstructions")}),a.jsx("div",{className:"flex justify-center",children:a.jsx("img",{src:`data:image/png;base64,${p.qr_code_b64}`,alt:"TOTP QR Code",className:"w-48 h-48 rounded-lg"})}),a.jsxs("div",{children:[a.jsx("p",{className:"text-xs text-bambu-gray mb-1",children:e("settings.twoFa.manualEntry")}),a.jsxs("div",{className:"flex items-center gap-2 bg-bambu-dark-secondary rounded-lg px-3 py-2",children:[a.jsx("code",{className:"text-white text-xs font-mono flex-1 break-all",children:u?p.secret:"••••••••••••••••"}),a.jsx("button",{onClick:()=>m(!u),className:"text-bambu-gray hover:text-white",children:u?a.jsx($g,{className:"w-4 h-4"}):a.jsx(pl,{className:"w-4 h-4"})}),a.jsx("button",{onClick:()=>{navigator.clipboard.writeText(p.secret)},className:"text-bambu-gray hover:text-white",children:a.jsx(ns,{className:"w-4 h-4"})})]})]}),a.jsx(De,{variant:"primary",className:"w-full",onClick:()=>s("confirm"),children:e("settings.twoFa.scannedContinue")})]}):i==="confirm"?a.jsxs("div",{className:"space-y-4",children:[a.jsx("p",{className:"text-bambu-gray-light text-sm",children:e("settings.twoFa.enterCodeToConfirm")}),a.jsx(gN,{value:o,onChange:l,placeholder:"000000"}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>s("qr"),className:"flex-1",children:e("common.back")}),a.jsx(De,{variant:"primary",className:"flex-1",disabled:o.length!==6||x.isPending,onClick:()=>x.mutate(o),children:x.isPending?e("common.saving"):e("settings.twoFa.activate")})]})]}):a.jsxs("div",{className:"space-y-4",children:[a.jsx("h3",{className:"text-white font-medium",children:e("settings.twoFa.backupCodesTitle")}),a.jsx(oce,{codes:c,onDone:t})]})}function wrt(){const{t}=_t(),e=tn(),{showToast:n}=rn(),{user:r}=gr(),[i,s]=w.useState(!1),[o,l]=w.useState(!1),[c,d]=w.useState(!1),[u,m]=w.useState(""),[p,f]=w.useState(""),[x,v]=w.useState(null),[b,g]=w.useState(null),[S,N]=w.useState(""),[P,C]=w.useState(!1),[A,T]=w.useState(""),[F,k]=w.useState(!1),{data:E,isLoading:$}=Qe({queryKey:["2fa-status"],queryFn:()=>oe.get2FAStatus()}),{data:z}=Qe({queryKey:["oidc-links"],queryFn:()=>oe.getOIDCLinks()}),X=ot({mutationFn:()=>oe.enableEmailOTP(),onSuccess:se=>{g(se.setup_token),n(se.message,"success")},onError:se=>{const K=se.message??"";K.toLowerCase().includes("smtp")?n(t("settings.twoFa.smtpRequired"),"error"):n(K,"error")}}),R=ot({mutationFn:()=>oe.confirmEnableEmailOTP(b,S),onSuccess:()=>{e.invalidateQueries({queryKey:["2fa-status"]}),g(null),N(""),n(t("settings.twoFa.emailOtpEnabled"),"success")},onError:se=>n(se.message,"error")}),ne=ot({mutationFn:se=>oe.disableEmailOTP(se),onSuccess:()=>{e.invalidateQueries({queryKey:["2fa-status"]}),C(!1),T(""),n(t("settings.twoFa.emailOtpDisabled"),"success")},onError:se=>n(se.message,"error")}),re=ot({mutationFn:se=>oe.disableTOTP(se),onSuccess:()=>{e.invalidateQueries({queryKey:["2fa-status"]}),l(!1),m(""),n(t("settings.twoFa.totpDisabled"),"success")},onError:()=>n(t("settings.twoFa.invalidCode"),"error")}),J=ot({mutationFn:se=>oe.regenerateBackupCodes(se),onSuccess:se=>{e.invalidateQueries({queryKey:["2fa-status"]}),d(!1),f(""),v(se.backup_codes)},onError:()=>n(t("settings.twoFa.invalidCode"),"error")}),ue=ot({mutationFn:se=>oe.deleteOIDCLink(se),onSuccess:()=>{e.invalidateQueries({queryKey:["oidc-links"]}),n(t("settings.twoFa.oidcUnlinked"),"success")},onError:se=>n(se.message,"error")});if($)return a.jsx("div",{className:"flex items-center justify-center py-12",children:a.jsx(sr,{className:"w-6 h-6 animate-spin text-bambu-green"})});const ie=!!r?.email;return a.jsxs("div",{className:"space-y-6",children:[a.jsxs(wt,{id:"card-2fa-totp",children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsx("div",{className:`w-10 h-10 rounded-full flex items-center justify-center ${E?.totp_enabled?"bg-green-500/20":"bg-gray-500/20"}`,children:a.jsx(kF,{className:`w-5 h-5 ${E?.totp_enabled?"text-green-400":"text-gray-400"}`})}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-white font-semibold",children:t("settings.twoFa.totpTitle")}),a.jsx("p",{className:"text-bambu-gray text-sm",children:t("settings.twoFa.totpDesc")})]}),a.jsx("div",{className:"ml-auto",children:E?.totp_enabled?a.jsxs("span",{className:"flex items-center gap-1 text-green-400 text-sm font-medium",children:[a.jsx(_F,{className:"w-4 h-4"})," ",t("common.enabled")]}):a.jsxs("span",{className:"flex items-center gap-1 text-bambu-gray text-sm",children:[a.jsx(GH,{className:"w-4 h-4"})," ",t("common.disabled")]})})]})}),a.jsx(St,{children:i?a.jsxs("div",{className:"space-y-4",children:[a.jsxs("div",{className:"flex items-center justify-between mb-2",children:[a.jsx("h4",{className:"text-white font-medium",children:t("settings.twoFa.setupAuthApp")}),a.jsx("button",{onClick:()=>{s(!1),e.removeQueries({queryKey:["totp-setup"]})},className:"text-bambu-gray hover:text-white",children:a.jsx(Bt,{className:"w-5 h-5"})})]}),a.jsx(vrt,{onDone:()=>{s(!1),e.removeQueries({queryKey:["totp-setup"]})}})]}):o?a.jsxs("div",{className:"space-y-4",children:[a.jsx("p",{className:"text-bambu-gray-light text-sm",children:t("settings.twoFa.disableConfirmHint")}),a.jsx(gN,{value:u,onChange:m,placeholder:"000000 or XXXXXXXX",maxLength:8}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{l(!1),m("")},className:"flex-1",children:t("common.cancel")}),a.jsx(De,{variant:"danger",className:"flex-1",disabled:u.length<6||re.isPending,onClick:()=>re.mutate(u),children:re.isPending?t("common.saving"):t("settings.twoFa.disableTotp")})]})]}):c?a.jsxs("div",{className:"space-y-4",children:[a.jsx("p",{className:"text-bambu-gray-light text-sm",children:t("settings.twoFa.regenBackupHint")}),a.jsx(gN,{value:p,onChange:f,placeholder:"000000 or XXXXXXXX",maxLength:8}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{d(!1),f("")},className:"flex-1",children:t("common.cancel")}),a.jsx(De,{variant:"primary",className:"flex-1",disabled:p.length<6||J.isPending,onClick:()=>J.mutate(p),children:J.isPending?t("common.saving"):t("settings.twoFa.regenBackup")})]})]}):x?a.jsxs("div",{className:"space-y-4",children:[a.jsx("h4",{className:"text-white font-medium",children:t("settings.twoFa.newBackupCodes")}),a.jsx(oce,{codes:x,onDone:()=>v(null)})]}):a.jsx("div",{className:"space-y-3",children:E?.totp_enabled?a.jsxs("div",{className:"flex flex-wrap gap-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-sm text-bambu-gray-light",children:[a.jsx(ao,{className:"w-4 h-4"}),t("settings.twoFa.backupCodesRemaining",{count:E.backup_codes_remaining})]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>d(!0),className:"flex items-center gap-2",children:[a.jsx(sr,{className:"w-4 h-4"}),t("settings.twoFa.regenBackup")]}),a.jsxs(De,{variant:"danger",size:"sm",onClick:()=>l(!0),className:"flex items-center gap-2",children:[a.jsx(Zt,{className:"w-4 h-4"}),t("settings.twoFa.disableTotp")]})]}):a.jsxs(De,{variant:"primary",onClick:()=>s(!0),className:"flex items-center gap-2",children:[a.jsx(kF,{className:"w-4 h-4"}),t("settings.twoFa.setupTotp")]})})})]}),a.jsxs(wt,{id:"card-2fa-emailotp",children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsx("div",{className:`w-10 h-10 rounded-full flex items-center justify-center ${E?.email_otp_enabled?"bg-green-500/20":"bg-gray-500/20"}`,children:a.jsx(xm,{className:`w-5 h-5 ${E?.email_otp_enabled?"text-green-400":"text-gray-400"}`})}),a.jsxs("div",{className:"flex-1",children:[a.jsx("h3",{className:"text-white font-semibold",children:t("settings.twoFa.emailOtpTitle")}),a.jsx("p",{className:"text-bambu-gray text-sm",children:ie?t("settings.twoFa.emailOtpDesc",{email:r?.email}):t("settings.twoFa.emailOtpNoEmail")})]}),a.jsx("div",{className:"ml-auto",children:E?.email_otp_enabled?a.jsxs("span",{className:"flex items-center gap-1 text-green-400 text-sm font-medium",children:[a.jsx(_F,{className:"w-4 h-4"})," ",t("common.enabled")]}):a.jsxs("span",{className:"flex items-center gap-1 text-bambu-gray text-sm",children:[a.jsx(GH,{className:"w-4 h-4"})," ",t("common.disabled")]})})]})}),a.jsx(St,{children:ie?b?a.jsxs("div",{className:"space-y-4",children:[a.jsx("p",{className:"text-bambu-gray-light text-sm",children:t("settings.twoFa.emailSetupEnterCode")}),a.jsx(gN,{value:S,onChange:N,placeholder:"000000"}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{g(null),N("")},className:"flex-1",children:t("common.cancel")}),a.jsx(De,{variant:"primary",className:"flex-1",disabled:S.length!==6||R.isPending,onClick:()=>R.mutate(),children:R.isPending?t("common.saving"):t("settings.twoFa.verifyAndEnable")})]})]}):P?a.jsxs("div",{className:"space-y-4",children:[a.jsx("p",{className:"text-bambu-gray-light text-sm",children:t("settings.twoFa.emailDisablePasswordHint")}),a.jsxs("div",{className:"relative",children:[a.jsx("input",{type:F?"text":"password",value:A,onChange:se=>T(se.target.value),placeholder:t("settings.twoFa.passwordPlaceholder"),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors"}),a.jsx("button",{type:"button",onClick:()=>k(!F),className:"absolute right-3 top-1/2 -translate-y-1/2 text-bambu-gray hover:text-white",children:F?a.jsx($g,{className:"w-5 h-5"}):a.jsx(pl,{className:"w-5 h-5"})})]}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{C(!1),T("")},className:"flex-1",children:t("common.cancel")}),a.jsx(De,{variant:"danger",className:"flex-1",disabled:!A||ne.isPending,onClick:()=>ne.mutate(A),children:ne.isPending?t("common.saving"):t("settings.twoFa.disableEmailOtp")})]})]}):a.jsx("div",{className:"flex gap-3",children:E?.email_otp_enabled?a.jsxs(De,{variant:"danger",size:"sm",onClick:()=>C(!0),className:"flex items-center gap-2",children:[a.jsx(Zt,{className:"w-4 h-4"}),t("settings.twoFa.disableEmailOtp")]}):a.jsxs(De,{variant:"primary",disabled:!ie||X.isPending,onClick:()=>X.mutate(),className:"flex items-center gap-2",children:[a.jsx(xm,{className:"w-4 h-4"}),X.isPending?t("common.saving"):t("settings.twoFa.enableEmailOtp")]})}):a.jsx("p",{className:"text-amber-400 text-sm",children:t("settings.twoFa.addEmailFirst")})})]}),z&&z.length>0&&a.jsxs(wt,{id:"card-2fa-linked",children:[a.jsxs(pn,{children:[a.jsx("h3",{className:"text-white font-semibold",children:t("settings.twoFa.linkedAccounts")}),a.jsx("p",{className:"text-bambu-gray text-sm",children:t("settings.twoFa.linkedAccountsDesc")})]}),a.jsx(St,{children:a.jsx("div",{className:"space-y-3",children:z.map(se=>a.jsxs("div",{className:"flex items-center justify-between py-2 border-b border-bambu-dark-tertiary last:border-0",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm font-medium",children:se.provider_name}),se.provider_email&&a.jsx("p",{className:"text-bambu-gray text-xs",children:se.provider_email})]}),a.jsx(De,{variant:"danger",size:"sm",onClick:()=>ue.mutate(se.provider_id),disabled:ue.isPending,children:a.jsx(Zt,{className:"w-4 h-4"})})]},se.id))})})]})]})}const Srt={name:"",issuer_url:"",client_id:"",client_secret:"",scopes:"openid email profile",is_enabled:!0,auto_create_users:!1,auto_link_existing_accounts:!1,email_claim:"email",require_email_verified:!0,icon_url:void 0};function qY({initial:t,isEdit:e=!1,onSave:n,onCancel:r,isPending:i}){const{t:s}=_t(),[o,l]=w.useState(t),[c,d]=w.useState(!1),u=(g,S)=>l(N=>({...N,[g]:S})),m="w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors text-sm",p="block text-sm font-medium text-white mb-1",f=()=>{const g={...o};e&&!c&&delete g.client_secret,n(g)},x=o.auto_link_existing_accounts===!0,v=o.require_email_verified??!0;let b;return x?b=s("settings.oidc.form.requireEmailVerifiedAutoLink"):v?b=s("settings.oidc.form.requireEmailVerifiedDesc"):b=a.jsx("span",{className:"text-red-400",children:s("settings.oidc.form.requireEmailVerifiedWarning")}),a.jsxs("div",{className:"space-y-4",children:[a.jsxs("div",{className:"grid grid-cols-1 sm:grid-cols-2 gap-4",children:[a.jsxs("div",{children:[a.jsxs("label",{className:p,children:[s("settings.oidc.form.name")," ",a.jsx("span",{className:"text-red-400",children:"*"})]}),a.jsx("input",{className:m,value:o.name,onChange:g=>u("name",g.target.value),placeholder:"Google"})]}),a.jsxs("div",{children:[a.jsxs("label",{className:p,children:[s("settings.oidc.form.issuerUrl")," ",a.jsx("span",{className:"text-red-400",children:"*"})]}),a.jsx("input",{className:m,value:o.issuer_url,onChange:g=>u("issuer_url",g.target.value),placeholder:"https://accounts.google.com"})]}),a.jsxs("div",{children:[a.jsxs("label",{className:p,children:[s("settings.oidc.form.clientId")," ",a.jsx("span",{className:"text-red-400",children:"*"})]}),a.jsx("input",{className:m,value:o.client_id,onChange:g=>u("client_id",g.target.value),placeholder:"your-client-id"})]}),a.jsxs("div",{children:[a.jsxs("label",{className:p,children:[s("settings.oidc.form.clientSecret"),!e&&a.jsx("span",{className:"text-red-400",children:" *"}),e&&a.jsxs("span",{className:"text-bambu-gray text-xs ml-1",children:["(",s("settings.oidc.form.secretHint"),")"]})]}),a.jsx("input",{className:m,type:"password",value:c?o.client_secret:"",placeholder:e&&!c?"••••••••":s("settings.oidc.form.secretPlaceholder"),onChange:g=>{d(!0),u("client_secret",g.target.value)}})]}),a.jsxs("div",{children:[a.jsx("label",{className:p,children:s("settings.oidc.form.scopes")}),a.jsx("input",{className:m,value:o.scopes,onChange:g=>u("scopes",g.target.value),placeholder:"openid email profile"})]}),a.jsxs("div",{children:[a.jsx("label",{className:p,children:s("settings.oidc.form.iconUrl")}),a.jsx("input",{className:m,value:o.icon_url??"",onChange:g=>u("icon_url",g.target.value||void 0),placeholder:"https://..."})]})]}),a.jsxs("div",{className:"flex flex-wrap gap-6 pt-2",children:[a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer",children:[a.jsx(Ln,{checked:o.is_enabled??!0,onChange:g=>u("is_enabled",g)}),a.jsx("span",{className:"text-white text-sm",children:s("settings.oidc.form.enabled")})]}),a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer",children:[a.jsx(Ln,{checked:o.auto_create_users??!1,onChange:g=>u("auto_create_users",g)}),a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm",children:s("settings.oidc.form.autoCreate")}),a.jsx("p",{className:"text-bambu-gray text-xs",children:s("settings.oidc.form.autoCreateDesc")})]})]}),a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer w-full",children:[a.jsx(Ln,{checked:o.auto_link_existing_accounts??!1,onChange:g=>u("auto_link_existing_accounts",g)}),a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm",children:s("settings.oidc.form.autoLink")}),a.jsx("p",{className:"text-bambu-gray text-xs",children:s("settings.oidc.form.autoLinkDesc")})]})]}),a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer w-full",children:[a.jsx(Ln,{checked:v,onChange:g=>u("require_email_verified",g),disabled:x}),a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm",children:s("settings.oidc.form.requireEmailVerified")}),a.jsx("p",{className:"text-bambu-gray text-xs",children:b})]})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:p,children:s("settings.oidc.form.emailClaim")}),a.jsx("input",{className:m,value:o.email_claim,onChange:g=>u("email_claim",g.target.value||"email"),placeholder:s("settings.oidc.form.emailClaimPlaceholder")}),a.jsx("p",{className:"text-bambu-gray text-xs mt-1",children:s("settings.oidc.form.emailClaimDesc")}),x&&o.email_claim!=="email"&&a.jsx("p",{className:"text-yellow-400 text-xs mt-1",children:s("settings.oidc.form.emailClaimCustomClaimAutoLinkWarning")})]}),a.jsxs("div",{className:"flex gap-3 pt-2",children:[a.jsx(De,{variant:"secondary",onClick:r,className:"flex-1",children:s("common.cancel")}),a.jsx(De,{variant:"primary",className:"flex-1",disabled:!o.name||!o.issuer_url||!o.client_id||!e&&!o.client_secret||e&&c&&!o.client_secret||i,onClick:f,children:s(i?"common.saving":"common.save")})]})]})}function _rt(){const{t}=_t(),e=tn(),{showToast:n}=rn(),[r,i]=w.useState(!1),[s,o]=w.useState(null),[l,c]=w.useState(null),{data:d,isLoading:u}=Qe({queryKey:["oidc-providers-all"],queryFn:()=>oe.getOIDCProvidersAll()}),m=ot({mutationFn:v=>oe.createOIDCProvider(v),onSuccess:()=>{e.invalidateQueries({queryKey:["oidc-providers-all"]}),i(!1),n(t("settings.oidc.created"),"success")},onError:v=>n(v.message,"error")}),p=ot({mutationFn:({id:v,data:b})=>oe.updateOIDCProvider(v,b),onSuccess:()=>{e.invalidateQueries({queryKey:["oidc-providers-all"]}),o(null),n(t("settings.oidc.updated"),"success")},onError:v=>n(v.message,"error")}),f=ot({mutationFn:v=>oe.deleteOIDCProvider(v),onSuccess:()=>{e.invalidateQueries({queryKey:["oidc-providers-all"]}),c(null),n(t("settings.oidc.deleted"),"success")},onError:v=>n(v.message,"error")}),x=v=>p.mutate({id:v.id,data:{is_enabled:!v.is_enabled}});return u?a.jsx("div",{className:"flex items-center justify-center py-12",children:a.jsx(sr,{className:"w-6 h-6 animate-spin text-bambu-green"})}):a.jsxs("div",{className:"space-y-6",children:[a.jsxs(wt,{id:"card-oidc",children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("h3",{className:"text-white font-semibold",children:t("settings.oidc.title")}),a.jsx("p",{className:"text-bambu-gray text-sm",children:t("settings.oidc.desc")})]}),!r&&a.jsxs(De,{variant:"primary",size:"sm",onClick:()=>i(!0),className:"flex items-center gap-2",children:[a.jsx(nr,{className:"w-4 h-4"}),t("settings.oidc.addProvider")]})]})}),r&&a.jsx(St,{children:a.jsxs("div",{className:"border-t border-bambu-dark-tertiary pt-4",children:[a.jsx("h4",{className:"text-white font-medium mb-4",children:t("settings.oidc.newProvider")}),a.jsx(qY,{initial:Srt,onSave:v=>m.mutate(v),onCancel:()=>i(!1),isPending:m.isPending})]})})]}),d&&d.length===0&&!r&&a.jsx(wt,{id:"card-oidc-empty",children:a.jsx(St,{children:a.jsxs("div",{className:"text-center py-8 space-y-3",children:[a.jsx(qs,{className:"w-12 h-12 text-bambu-gray mx-auto"}),a.jsx("p",{className:"text-bambu-gray",children:t("settings.oidc.empty")}),a.jsxs(De,{variant:"primary",size:"sm",onClick:()=>i(!0),className:"inline-flex items-center gap-2",children:[a.jsx(nr,{className:"w-4 h-4"}),t("settings.oidc.addProvider")]})]})})}),d?.map(v=>a.jsxs(wt,{children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center gap-3",children:[v.icon_url?a.jsx("img",{src:v.icon_url,alt:v.name,className:"w-8 h-8 rounded object-contain",onError:b=>{b.target.style.display="none"}}):a.jsx("div",{className:"w-8 h-8 rounded-full bg-bambu-dark-tertiary flex items-center justify-center",children:a.jsx(qs,{className:"w-4 h-4 text-bambu-gray"})}),a.jsxs("div",{className:"flex-1",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("h4",{className:"text-white font-medium",children:v.name}),v.is_enabled?a.jsxs("span",{className:"flex items-center gap-1 text-xs text-green-400 bg-green-400/10 px-2 py-0.5 rounded-full",children:[a.jsx(jr,{className:"w-3 h-3"})," ",t("common.enabled")]}):a.jsxs("span",{className:"flex items-center gap-1 text-xs text-bambu-gray bg-bambu-dark-tertiary px-2 py-0.5 rounded-full",children:[a.jsx(Bt,{className:"w-3 h-3"})," ",t("common.disabled")]})]}),a.jsxs("div",{className:"flex items-center gap-1 text-bambu-gray text-xs mt-0.5",children:[a.jsx(Ar,{className:"w-3 h-3"}),a.jsx("span",{children:v.issuer_url})]})]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(Ln,{checked:v.is_enabled,onChange:()=>x(v),disabled:p.isPending}),a.jsx(De,{variant:"secondary",size:"sm",onClick:()=>o(s===v.id?null:v.id),children:a.jsx(Ju,{className:"w-4 h-4"})}),a.jsx(De,{variant:"danger",size:"sm",onClick:()=>c(v),children:a.jsx(Zt,{className:"w-4 h-4"})})]})]})}),s===v.id&&a.jsx(St,{children:a.jsx("div",{className:"border-t border-bambu-dark-tertiary pt-4",children:a.jsx(qY,{isEdit:!0,initial:{name:v.name,issuer_url:v.issuer_url,client_id:v.client_id,client_secret:"",scopes:v.scopes,is_enabled:v.is_enabled,auto_create_users:v.auto_create_users,auto_link_existing_accounts:v.auto_link_existing_accounts,email_claim:v.email_claim,require_email_verified:v.require_email_verified,icon_url:v.icon_url??void 0},onSave:b=>p.mutate({id:v.id,data:b}),onCancel:()=>o(null),isPending:p.isPending})})}),s!==v.id&&a.jsx(St,{children:a.jsxs("dl",{className:"grid grid-cols-2 sm:grid-cols-3 gap-x-6 gap-y-2 text-sm",children:[a.jsxs("div",{children:[a.jsx("dt",{className:"text-bambu-gray",children:t("settings.oidc.form.clientId")}),a.jsx("dd",{className:"text-white font-mono truncate",children:v.client_id})]}),a.jsxs("div",{children:[a.jsx("dt",{className:"text-bambu-gray",children:t("settings.oidc.form.scopes")}),a.jsx("dd",{className:"text-white",children:v.scopes})]}),a.jsxs("div",{children:[a.jsx("dt",{className:"text-bambu-gray",children:t("settings.oidc.form.autoCreate")}),a.jsx("dd",{className:v.auto_create_users?"text-green-400":"text-bambu-gray",children:v.auto_create_users?t("common.yes"):t("common.no")})]}),a.jsxs("div",{children:[a.jsx("dt",{className:"text-bambu-gray",children:t("settings.oidc.form.autoLink")}),a.jsx("dd",{className:v.auto_link_existing_accounts?"text-green-400":"text-bambu-gray",children:v.auto_link_existing_accounts?t("common.yes"):t("common.no")})]}),a.jsxs("div",{children:[a.jsx("dt",{className:"text-bambu-gray",children:t("settings.oidc.form.emailClaim")}),a.jsx("dd",{className:"text-white font-mono",children:v.email_claim})]}),a.jsxs("div",{children:[a.jsx("dt",{className:"text-bambu-gray",children:t("settings.oidc.form.requireEmailVerified")}),a.jsx("dd",{className:v.require_email_verified?"text-green-400":"text-red-400",children:v.require_email_verified?t("common.yes"):t("common.no")})]})]})})]},v.id)),l&&a.jsx(yn,{title:t("settings.oidc.deleteTitle"),message:t("settings.oidc.deleteMessage",{name:l.name}),confirmText:t("common.delete"),variant:"danger",onConfirm:()=>f.mutate(l.id),onCancel:()=>c(null)})]})}const krt={get:"bg-blue-500/20 text-blue-400 border-blue-500/30",post:"bg-green-500/20 text-green-400 border-green-500/30",put:"bg-yellow-500/20 text-yellow-400 border-yellow-500/30",patch:"bg-orange-500/20 text-orange-400 border-orange-500/30",delete:"bg-red-500/20 text-red-400 border-red-500/30"};function Nrt(t,e){const n=e.replace("#/","").split("/");let r=t;for(const i of n)r=r[i];return r}function A0(t,e,n=0){if(n>5)return"...";if(e.$ref)return A0(t,Nrt(t,e.$ref),n+1);if(e.allOf){const r={};for(const i of e.allOf){const s=A0(t,i,n+1);typeof s=="object"&&s!==null&&Object.assign(r,s)}return r}if(e.example!==void 0)return e.example;if(e.default!==void 0)return e.default;switch(e.type){case"string":return e.enum?e.enum[0]:"string";case"integer":case"number":return 0;case"boolean":return!1;case"array":return e.items?[A0(t,e.items,n+1)]:[];case"object":if(e.properties){const r={};for(const[i,s]of Object.entries(e.properties))r[i]=A0(t,s,n+1);return r}return{};default:return null}}function Crt({path:t,method:e,spec:n,schema:r,apiKey:i}){const[s,o]=w.useState(!1),[l,c]=w.useState({}),[d,u]=w.useState(""),[m,p]=w.useState(null),[f,x]=w.useState(!1),[v,b]=w.useState(!1);w.useEffect(()=>{if(s&&n.parameters){const F={};for(const k of n.parameters)k.schema?.default!==void 0&&(F[k.name]=String(k.schema.default));c(k=>({...F,...k}))}},[s,n.parameters]),w.useEffect(()=>{if(s&&n.requestBody?.content?.["application/json"]?.schema&&!d){const F=n.requestBody.content["application/json"].schema,k=A0(r,F);u(JSON.stringify(k,null,2))}},[s,n.requestBody,r,d]);const S=(()=>{const F=[];for(const k of n.parameters||[])if(k.in==="path"||k.required){const E=l[k.name];(E===void 0||E==="")&&F.push(k.name)}return F})(),N=async()=>{if(S.length>0){p({status:0,statusText:"Validation Error",headers:{},body:`Missing required parameters: ${S.join(", ")}`,duration:0});return}x(!0),p(null);try{let F=t;const k=new URLSearchParams;for(const se of n.parameters||[]){const K=l[se.name];K!==void 0&&K!==""&&(se.in==="path"?F=F.replace(`{${se.name}}`,encodeURIComponent(K)):se.in==="query"&&k.append(se.name,K))}const E=k.toString(),$=`${F}${E?`?${E}`:""}`,z={"Content-Type":"application/json"};i&&(z["X-API-Key"]=i);const X={method:e.toUpperCase(),headers:z};["post","put","patch"].includes(e)&&d&&(X.body=d);const R=performance.now(),ne=await fetch($,X),re=Math.round(performance.now()-R),J={};ne.headers.forEach((se,K)=>{J[K]=se});let ue;ne.headers.get("content-type")?.includes("application/json")?ue=await ne.json():ue=await ne.text(),p({status:ne.status,statusText:ne.statusText,headers:J,body:ue,duration:re})}catch(F){p({status:0,statusText:"Network Error",headers:{},body:F instanceof Error?F.message:"Unknown error",duration:0})}finally{x(!1)}},P=async()=>{if(m){const F=typeof m.body=="string"?m.body:JSON.stringify(m.body,null,2);try{await navigator.clipboard.writeText(F),b(!0),setTimeout(()=>b(!1),2e3)}catch{const k=document.createElement("textarea");k.value=F,k.style.position="fixed",k.style.left="-999999px",document.body.appendChild(k),k.select(),document.execCommand("copy"),document.body.removeChild(k),b(!0),setTimeout(()=>b(!1),2e3)}}},C=(n.parameters||[]).filter(F=>F.in==="path"),A=(n.parameters||[]).filter(F=>F.in==="query"),T=["post","put","patch"].includes(e)&&n.requestBody;return a.jsxs("div",{className:"border border-bambu-dark-tertiary rounded-lg overflow-hidden",children:[a.jsxs("button",{onClick:()=>o(!s),className:"w-full flex items-center gap-3 p-3 hover:bg-bambu-dark-tertiary/50 transition-colors text-left",children:[s?a.jsx(zn,{className:"w-4 h-4 text-bambu-gray flex-shrink-0"}):a.jsx(za,{className:"w-4 h-4 text-bambu-gray flex-shrink-0"}),a.jsx("span",{className:`px-2 py-0.5 text-xs font-mono font-semibold uppercase rounded border ${krt[e]||"bg-gray-500/20 text-gray-400"}`,children:e}),a.jsx("code",{className:"text-sm text-white font-mono flex-1 truncate",children:t}),n.summary&&a.jsx("span",{className:"text-sm text-bambu-gray truncate max-w-[40%]",children:n.summary})]}),s&&a.jsxs("div",{className:"border-t border-bambu-dark-tertiary p-4 space-y-4 bg-bambu-dark/50",children:[n.description&&a.jsx("p",{className:"text-sm text-bambu-gray",children:n.description}),C.length>0&&a.jsxs("div",{className:"space-y-2",children:[a.jsx("h4",{className:"text-sm font-medium text-white",children:"Path Parameters"}),a.jsx("div",{className:"space-y-2",children:C.map(F=>a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsxs("label",{className:"text-sm text-bambu-gray w-32 flex-shrink-0",children:[F.name,F.required&&a.jsx("span",{className:"text-red-400 ml-1",children:"*"})]}),a.jsx("input",{type:"text",value:l[F.name]||"",onChange:k=>c(E=>({...E,[F.name]:k.target.value})),placeholder:F.description||F.schema?.type||"value",className:"flex-1 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm font-mono focus:border-bambu-green focus:outline-none"})]},F.name))})]}),A.length>0&&a.jsxs("div",{className:"space-y-2",children:[a.jsx("h4",{className:"text-sm font-medium text-white",children:"Query Parameters"}),a.jsx("div",{className:"space-y-2",children:A.map(F=>a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsxs("label",{className:"text-sm text-bambu-gray w-32 flex-shrink-0",children:[F.name,F.required&&a.jsx("span",{className:"text-red-400 ml-1",children:"*"})]}),F.schema?.enum?a.jsxs("select",{value:l[F.name]||"",onChange:k=>c(E=>({...E,[F.name]:k.target.value})),className:"flex-1 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"",children:"-- Select --"}),F.schema.enum.map(k=>a.jsx("option",{value:k,children:k},k))]}):a.jsx("input",{type:"text",value:l[F.name]||"",onChange:k=>c(E=>({...E,[F.name]:k.target.value})),placeholder:F.description||F.schema?.type||"value",className:"flex-1 px-2 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm font-mono focus:border-bambu-green focus:outline-none"})]},F.name))})]}),T&&a.jsxs("div",{className:"space-y-2",children:[a.jsx("h4",{className:"text-sm font-medium text-white",children:"Request Body"}),a.jsx("textarea",{value:d,onChange:F=>u(F.target.value),rows:8,className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm font-mono focus:border-bambu-green focus:outline-none resize-y",placeholder:"JSON request body..."})]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsxs(De,{onClick:N,disabled:f,children:[f?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(rs,{className:"w-4 h-4"}),"Execute"]}),S.length>0&&a.jsxs("span",{className:"text-xs text-yellow-400 flex items-center gap-1",children:[a.jsx(Oa,{className:"w-3 h-3"}),"Fill in: ",S.join(", ")]})]}),m&&a.jsxs("div",{className:"space-y-2",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("h4",{className:"text-sm font-medium text-white flex items-center gap-2",children:["Response",a.jsxs("span",{className:`px-2 py-0.5 text-xs rounded ${m.status>=200&&m.status<300?"bg-green-500/20 text-green-400":m.status>=400?"bg-red-500/20 text-red-400":"bg-yellow-500/20 text-yellow-400"}`,children:[m.status," ",m.statusText]}),a.jsxs("span",{className:"text-xs text-bambu-gray",children:[m.duration,"ms"]})]}),a.jsx(De,{variant:"secondary",size:"sm",onClick:P,children:v?a.jsx(wr,{className:"w-3 h-3 text-green-400"}):a.jsx(ns,{className:"w-3 h-3"})})]}),a.jsx("pre",{className:"p-3 bg-bambu-dark rounded-lg text-sm font-mono text-white overflow-auto max-h-96 border border-bambu-dark-tertiary",children:typeof m.body=="string"?m.body:JSON.stringify(m.body,null,2)})]})]})]})}function Prt({apiKey:t=""}){const[e,n]=w.useState(null),[r,i]=w.useState(!0),[s,o]=w.useState(null),[l,c]=w.useState(new Set),[d,u]=w.useState("");if(w.useEffect(()=>{async function b(){try{const g=await fetch("/openapi.json");if(!g.ok)throw new Error("Failed to fetch OpenAPI schema");const S=await g.json();n(S)}catch(g){o(g instanceof Error?g.message:"Unknown error")}finally{i(!1)}}b()},[]),r)return a.jsx("div",{className:"flex justify-center py-12",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})});if(s||!e)return a.jsx(wt,{children:a.jsx(St,{className:"py-8",children:a.jsxs("div",{className:"text-center text-red-400",children:[a.jsx(Oa,{className:"w-12 h-12 mx-auto mb-3 opacity-50"}),a.jsx("p",{children:"Failed to load API schema"}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:s})]})})});const m={};for(const[b,g]of Object.entries(e.paths))for(const[S,N]of Object.entries(g)){if(S==="parameters")continue;const P=N.tags||["Other"];for(const C of P)m[C]||(m[C]=[]),m[C].push({path:b,method:S,spec:N})}const p=Object.entries(m).map(([b,g])=>{if(!d)return{tag:b,endpoints:g};const S=g.filter(({path:N,method:P,spec:C})=>{const A=d.toLowerCase();return N.toLowerCase().includes(A)||P.toLowerCase().includes(A)||(C.summary?.toLowerCase()||"").includes(A)||(C.description?.toLowerCase()||"").includes(A)});return{tag:b,endpoints:S}}).filter(({endpoints:b})=>b.length>0).sort((b,g)=>b.tag.localeCompare(g.tag)),f=b=>{c(g=>{const S=new Set(g);return S.has(b)?S.delete(b):S.add(b),S})},x=()=>{c(new Set(p.map(b=>b.tag)))},v=()=>{c(new Set)};return a.jsxs("div",{className:"space-y-4",children:[a.jsxs("div",{className:"flex items-center justify-between gap-4",children:[a.jsx("div",{className:"flex-1",children:a.jsx("input",{type:"text",value:d,onChange:b=>u(b.target.value),placeholder:"Search endpoints...",className:"w-full max-w-md px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(De,{variant:"secondary",size:"sm",onClick:x,children:"Expand All"}),a.jsx(De,{variant:"secondary",size:"sm",onClick:v,children:"Collapse All"}),a.jsxs("a",{href:"/docs",target:"_blank",rel:"noopener noreferrer",className:"flex items-center gap-1 text-sm text-bambu-green hover:underline",children:[a.jsx(Ar,{className:"w-4 h-4"}),"Swagger UI"]})]})]}),a.jsxs("p",{className:"text-sm text-bambu-gray",children:[p.reduce((b,g)=>b+g.endpoints.length,0)," endpoints in ",p.length," categories"]}),a.jsx("div",{className:"space-y-3",children:p.map(({tag:b,endpoints:g})=>a.jsxs(wt,{children:[a.jsx("button",{onClick:()=>f(b),className:"w-full flex items-center justify-between p-4 hover:bg-bambu-dark-tertiary/30 transition-colors text-left",children:a.jsxs("div",{className:"flex items-center gap-2",children:[l.has(b)?a.jsx(zn,{className:"w-5 h-5 text-bambu-gray"}):a.jsx(za,{className:"w-5 h-5 text-bambu-gray"}),a.jsx("h3",{className:"text-base font-semibold text-white capitalize",children:b.replace(/-/g," ")}),a.jsx("span",{className:"text-xs bg-bambu-dark-tertiary px-2 py-0.5 rounded-full text-bambu-gray",children:g.length})]})}),l.has(b)&&a.jsx(St,{className:"pt-0 space-y-2",children:g.map(({path:S,method:N,spec:P})=>a.jsx(Crt,{path:S,method:N,spec:P,schema:e,apiKey:t},`${N}-${S}`))})]},b))})]})}const lce=new Map;function Tn(t){lce.set(t.anchor,t)}function Trt(){return Array.from(lce.values())}const Art=["general","plugs","notifications","queue","filament","network","apikeys","virtual-printer","spoolbuddy","failure-detection","users","backup"];Tn({labelKey:"settings.general",tab:"general",keywords:"language date time format printer model printers cards",anchor:"card-general"});Tn({labelKey:"settings.appearance",tab:"general",keywords:"theme dark light mode colors",anchor:"card-appearance"});Tn({labelKey:"settings.archiveSettings",tab:"general",keywords:"archive auto save thumbnails captures",anchor:"card-archive"});Tn({labelKey:"settings.camera",tab:"general",keywords:"camera external video stream",anchor:"card-camera"});Tn({labelKey:"settings.costTracking",tab:"general",keywords:"currency filament cost energy kwh price",anchor:"card-cost"});Tn({labelKey:"settings.fileManager",tab:"general",keywords:"file manager archive mode disk warning storage",anchor:"card-filemanager"});Tn({labelKey:"settings.updates",tab:"general",keywords:"updates version firmware beta check",anchor:"card-updates"});Tn({labelKey:"settings.dataManagement",tab:"general",keywords:"data reset clear logs notifications preferences",anchor:"card-data"});Tn({labelKey:"settings.smartPlugs",tab:"plugs",keywords:"smart plug energy power automation tapo kasa tplink shelly",anchor:"card-plugs"});Tn({labelKey:"settings.providers",tab:"notifications",keywords:"telegram discord email notification providers webhook",anchor:"card-providers"});Tn({labelKey:"settings.messageTemplates",tab:"notifications",keywords:"message templates notification text edit",anchor:"card-templates"});Tn({labelKey:"settings.defaultPrintOptions",labelFallback:"Default Print Options",tab:"queue",keywords:"print bed leveling flow calibration vibration first layer timelapse",anchor:"card-print-options"});Tn({labelKey:"settings.staggeredStart",labelFallback:"Staggered Start",tab:"queue",keywords:"staggered batch delay start queue group",anchor:"card-staggered"});Tn({labelKey:"settings.plateClear",labelFallback:"Plate-Clear Confirmation",tab:"queue",keywords:"plate clear confirm auto queue",anchor:"card-plate"});Tn({labelKey:"settings.gcodeInjection",labelFallback:"G-code Injection",tab:"queue",keywords:"gcode injection start end autoprint farmloop swapmod autoclear printflow",anchor:"card-gcode"});Tn({labelKey:"settings.slicerCard",labelFallback:"Slicer",tab:"queue",keywords:"slicer orcaslicer bambustudio orca bambu api sidecar url docker preferred",anchor:"card-slicer"});Tn({labelKey:"settings.queueDrying",tab:"queue",keywords:"drying presets temperature time humidity ams",anchor:"card-drying"});Tn({labelKey:"settings.filamentChecks",tab:"filament",keywords:"filament check warning runout remaining",anchor:"card-filamentchecks"});Tn({labelKey:"settings.printModal",tab:"filament",keywords:"print modal custom mapping",anchor:"card-printmodal"});Tn({labelKey:"settings.amsDisplayThresholds",tab:"filament",keywords:"ams humidity temperature threshold history retention",anchor:"card-amsthresholds"});Tn({labelKey:"settings.externalUrl",tab:"network",keywords:"external url reverse proxy public notification link",anchor:"card-externalurl"});Tn({labelKey:"settings.ftpRetry",tab:"network",keywords:"ftp retry upload retries backoff",anchor:"card-ftpretry"});Tn({labelKey:"settings.homeAssistant",tab:"network",keywords:"home assistant ha hass mqtt integration",anchor:"card-ha"});Tn({labelKey:"settings.mqttPublishing",tab:"network",keywords:"mqtt publish broker topic",anchor:"card-mqtt"});Tn({labelKey:"settings.prometheusMetrics",tab:"network",keywords:"prometheus metrics grafana monitoring bearer token",anchor:"card-prometheus"});Tn({labelKey:"settings.createNewApiKey",tab:"apikeys",keywords:"api key create permission scope",anchor:"card-createapi"});Tn({labelKey:"settings.webhookEndpoints",tab:"apikeys",keywords:"webhook endpoint post http",anchor:"card-webhooks"});Tn({labelKey:"settings.apiBrowser",tab:"apikeys",keywords:"api browser endpoint documentation test",anchor:"card-apibrowser"});Tn({labelKey:"cameraTokens.title",tab:"apikeys",keywords:"camera token long-lived home assistant frigate kiosk stream",anchor:"card-camera-tokens"});Tn({labelKey:"settings.tabs.virtualPrinter",tab:"virtual-printer",keywords:"virtual printer proxy archive slicer bambustudio orcaslicer ip bind",anchor:"card-vp"});Tn({labelKey:"settings.tabs.spoolbuddy",tab:"spoolbuddy",keywords:"spoolbuddy device scale nfc rfid kiosk unregister",anchor:"card-spoolbuddy"});Tn({labelKey:"settings.currentUser",tab:"users",subTab:"users",keywords:"current user profile password change",anchor:"card-currentuser"});Tn({labelKey:"settings.users",tab:"users",subTab:"users",keywords:"users accounts list",anchor:"card-users"});Tn({labelKey:"settings.groups",tab:"users",subTab:"users",keywords:"groups roles permissions administrators operators viewers",anchor:"card-groups"});Tn({labelKey:"settings.email.smtpSettings",labelFallback:"SMTP Configuration",tab:"users",subTab:"email",keywords:"smtp email send server port password auth starttls ssl",anchor:"card-smtp"});Tn({labelKey:"settings.ldap.title",labelFallback:"LDAP Authentication",tab:"users",subTab:"ldap",keywords:"ldap active directory ad authentication bind dn search base group mapping",anchor:"card-ldap"});Tn({labelKey:"settings.tabs.backup",tab:"backup",keywords:"backup github restore download cloud sync profiles archives",anchor:"card-backup"});Tn({labelKey:"externalLinks.title",labelFallback:"Sidebar Links",tab:"general",keywords:"sidebar links external custom navigation url add",anchor:"card-sidebar-links"});Tn({labelKey:"settings.filamentTracking",tab:"filament",keywords:"spoolman filament tracking inventory sync remote integration",anchor:"card-spoolman"});Tn({labelKey:"settings.catalog.spoolCatalog",labelFallback:"Spool Catalog",tab:"filament",keywords:"spool catalog entries brand material reset import export",anchor:"card-spool-catalog"});Tn({labelKey:"settings.colorCatalog.title",labelFallback:"Color Catalog",tab:"filament",keywords:"color catalog hex swatch palette sync reset",anchor:"card-color-catalog"});Tn({labelKey:"settings.tabs.failureDetection",labelFallback:"Failure Detection",tab:"failure-detection",keywords:"failure detection ai ml obico spaghetti detect monitoring",anchor:"card-fd-ml"});Tn({labelKey:"failureDetection.perPrinterTitle",labelFallback:"Per-Printer Settings",tab:"failure-detection",keywords:"failure detection per printer enable per-printer sensitivity",anchor:"card-fd-perprinter"});Tn({labelKey:"failureDetection.statusTitle",labelFallback:"Detection Status",tab:"failure-detection",keywords:"failure detection status running connection",anchor:"card-fd-status"});Tn({labelKey:"failureDetection.historyTitle",labelFallback:"Detection History",tab:"failure-detection",keywords:"failure detection history log events",anchor:"card-fd-history"});Tn({labelKey:"settings.email.advancedAuth",labelFallback:"Advanced Email Authentication",tab:"users",subTab:"email",keywords:"email authentication advanced password reset self-service forgot",anchor:"card-email-advanced-auth"});Tn({labelKey:"settings.email.testConnection",labelFallback:"Test SMTP Connection",tab:"users",subTab:"email",keywords:"email smtp test connection send check",anchor:"card-email-test"});Tn({labelKey:"settings.twoFa.totpTitle",labelFallback:"Authenticator App (TOTP)",tab:"users",subTab:"twofa",keywords:"two factor 2fa totp authenticator app google authy otp",anchor:"card-2fa-totp"});Tn({labelKey:"settings.twoFa.emailOtpTitle",labelFallback:"Email One-Time Codes",tab:"users",subTab:"twofa",keywords:"two factor 2fa email otp one time code",anchor:"card-2fa-emailotp"});Tn({labelKey:"settings.twoFa.linkedAccounts",labelFallback:"Linked Accounts",tab:"users",subTab:"twofa",keywords:"two factor 2fa linked accounts sso oidc provider google github",anchor:"card-2fa-linked"});Tn({labelKey:"settings.oidc.title",labelFallback:"Single Sign-On (OIDC)",tab:"users",subTab:"oidc",keywords:"sso oidc openid single sign-on pocketid authentik keycloak google okta azure provider",anchor:"card-oidc"});Tn({labelKey:"settings.ldap.serverConfig",labelFallback:"LDAP Server Configuration",tab:"users",subTab:"ldap",keywords:"ldap server url bind dn user search base group filter tls",anchor:"card-ldap-server"});Tn({labelKey:"backup.githubBackup",labelFallback:"GitHub Backup",tab:"backup",keywords:"github backup cloud remote sync profiles token",anchor:"card-backup-github"});Tn({labelKey:"backup.history",labelFallback:"Backup History",tab:"backup",keywords:"backup history log runs github commits",anchor:"card-backup-history"});Tn({labelKey:"backup.localBackup",labelFallback:"Local Backup",tab:"backup",keywords:"local backup download zip manual export",anchor:"card-backup-local"});Tn({labelKey:"backup.scheduledBackup",labelFallback:"Scheduled Backups",tab:"backup",keywords:"scheduled backup automatic hourly daily weekly retention local path",anchor:"card-backup-scheduled"});const jrt={database:"bg-blue-600",library_files:"bg-green-500",library_thumbnails:"bg-teal-500",library_other:"bg-emerald-700",archive_timelapses:"bg-red-500",archive_thumbnails:"bg-amber-500",archive_files:"bg-sky-500",virtual_printer_uploads:"bg-purple-500",virtual_printer_upload_cache:"bg-fuchsia-500",virtual_printer_certs:"bg-violet-500",virtual_printer_other:"bg-purple-700",downloads:"bg-cyan-500",plate_calibration:"bg-lime-500",logs:"bg-orange-500",other_data:"bg-yellow-500"},$Y=["bg-blue-500","bg-green-500","bg-yellow-500","bg-red-500","bg-orange-500","bg-teal-500","bg-cyan-500","bg-purple-500"],VY=(t,e)=>jrt[t]||$Y[e%$Y.length];function Mrt(){const t=tn(),e=as(),[n,r]=rS(),{t:i,i18n:s}=_t(),{showToast:o}=rn(),{authEnabled:l,user:c,isAdmin:d,refreshAuth:u,hasPermission:m}=gr(),{mode:p,darkStyle:f,darkBackground:x,darkAccent:v,lightStyle:b,lightBackground:g,lightAccent:S,setDarkStyle:N,setDarkBackground:P,setDarkAccent:C,setLightStyle:A,setLightBackground:T,setLightAccent:F}=Gg(),[k,E]=w.useState(null),[$,z]=w.useState(!1),[X,R]=w.useState(null),[ne,re]=w.useState(!1),[J,ue]=w.useState(null),[ie,se]=w.useState(null),[K,ae]=w.useState(""),[pe,be]=w.useState(""),[fe,B]=w.useState(!1),[Y,D]=w.useState(jJ()),M=n.get("tab"),U=M==="email",Q=U?"users":M&&Art.includes(M)?M:"general",[O,ce]=w.useState(Q),[I,G]=w.useState(U?"email":"users"),q=_e=>{ce(_e),_e==="users"&&G("users"),_e==="general"?n.delete("tab"):n.set("tab",_e),r(n,{replace:!0})},[W,te]=w.useState(!1),[le,ye]=w.useState(""),[he,me]=w.useState({can_queue:!0,can_control_printer:!1,can_read_status:!0}),[H,L]=w.useState(null),[ee,ge]=w.useState(null),[ke,je]=w.useState(""),[Te,xe]=w.useState(!1),[Fe,Be]=w.useState(!1),[Ce,ze]=w.useState(null),[Me,Oe]=w.useState(!1),[Ge,et]=w.useState(!1),[ve,Xe]=w.useState(!1),[Pe,Ve]=w.useState({currentPassword:"",newPassword:"",confirmPassword:""}),[we,de]=w.useState(!1),[Se,$e]=w.useState(!1),[st,He]=w.useState(!1),[at,ht]=w.useState(!1),[Mt,qt]=w.useState(null),[Vt,Gt]=w.useState(null),[Qt,an]=w.useState(null),[mn,dn]=w.useState(!1),[jt,Jt]=w.useState({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]}),[zt,Tt]=w.useState(null),[Ie,Re]=w.useState(null),[Ye,Ze]=w.useState(!1),[Le,dt]=w.useState({}),[Ae,We]=w.useState({}),tt=_e=>{D(_e),pve(_e),o(i("settings.toast.settingsSaved"),"success")},nt=()=>{localStorage.removeItem("sidebarOrder"),window.location.reload()},Je=!!k?.default_sidebar_order,Ue=async _e=>{try{if(_e){let Et;const Fn=localStorage.getItem("sidebarOrder");try{Et=Fn?JSON.parse(Fn):Zu.map(it=>it.id)}catch{Et=Zu.map(it=>it.id)}(!Array.isArray(Et)||Et.length===0)&&(Et=Zu.map(it=>it.id));const kn=JSON.stringify({order:Et});await oe.updateSettings({default_sidebar_order:kn}),E(it=>it&&{...it,default_sidebar_order:kn}),o(i("settings.sidebarDefaultSet"),"success")}else await oe.updateSettings({default_sidebar_order:""}),E(Et=>Et&&{...Et,default_sidebar_order:""}),o(i("settings.sidebarDefaultCleared"),"success");t.invalidateQueries({queryKey:["settings"]}),t.invalidateQueries({queryKey:["default-sidebar-order"]})}catch{o(i("settings.sidebarDefaultFailed"),"error")}},{data:rt,isLoading:Ct}=Qe({queryKey:["settings"],queryFn:oe.getSettings}),{data:bt,isLoading:Ot,isFetching:Lt}=Qe({queryKey:["storage-usage"],queryFn:()=>oe.getStorageUsage(),enabled:O==="general",staleTime:1/0,refetchInterval:!1,refetchOnWindowFocus:!1,refetchOnReconnect:!1}),Ft=async()=>{$e(!0);try{const _e=await oe.getStorageUsage({refresh:!0});t.setQueryData(["storage-usage"],_e)}catch(_e){const Et=_e instanceof Error?_e.message:"Failed to refresh storage usage";o(Et,"error")}finally{$e(!1)}},{data:Ke,isLoading:Ht}=Qe({queryKey:["smart-plugs"],queryFn:oe.getSmartPlugs}),{data:Yt,isLoading:on}=Qe({queryKey:["smart-plugs-energy",Ke?.map(_e=>_e.id)],queryFn:async()=>{if(!Ke||Ke.length===0)return null;const _e=await Promise.all(Ke.filter(Xt=>Xt.enabled).map(async Xt=>{try{const ct=await oe.getSmartPlugStatus(Xt.id);return{plug:Xt,status:ct}}catch{return{plug:Xt,status:null}}}));let Et=0,Fn=0,kn=0,it=0,Dt=0;for(const{plug:Xt,status:ct}of _e){const Mn=Xt.plug_type==="mqtt"&&ct?.energy?.power!=null;(ct?.reachable||Mn)&&ct?.energy&&(Dt++,ct.energy?.power!=null&&(Et+=ct.energy.power),ct.energy?.today!=null&&(Fn+=ct.energy.today),ct.energy?.yesterday!=null&&(kn+=ct.energy.yesterday),ct.energy?.total!=null&&(it+=ct.energy.total))}return{totalPower:Et,totalToday:Fn,totalYesterday:kn,totalLifetime:it,reachableCount:Dt,totalPlugs:Ke.filter(Xt=>Xt.enabled).length}},enabled:O==="plugs"&&!!Ke&&Ke.length>0,refetchInterval:O==="plugs"?1e4:!1}),{data:wn,isLoading:gn}=Qe({queryKey:["notification-providers"],queryFn:oe.getNotificationProviders}),{data:_n,isLoading:xn}=Qe({queryKey:["api-keys"],queryFn:oe.getAPIKeys}),br=ot({mutationFn:_e=>oe.createAPIKey(_e),onSuccess:_e=>{L(_e.key||null),te(!1),ye(""),t.invalidateQueries({queryKey:["api-keys"]}),o(i("settings.toast.apiKeyCreated"))},onError:_e=>{o(`Failed to create API key: ${_e.message}`,"error")}}),Tr=ot({mutationFn:_e=>oe.deleteAPIKey(_e),onSuccess:(_e,Et)=>{t.setQueryData(["api-keys"],Fn=>(Fn??[]).filter(kn=>kn.id!==Et)),o(i("settings.toast.apiKeyDeleted"))},onError:_e=>{o(`Failed to delete API key: ${_e.message}`,"error")}}),{data:On}=Qe({queryKey:["printers"],queryFn:oe.getPrinters}),{data:Ra,isLoading:$n}=Qe({queryKey:["notification-templates"],queryFn:oe.getNotificationTemplates}),{data:Br}=Qe({queryKey:["virtual-printer-settings"],queryFn:CF.getSettings,refetchInterval:1e4}),Kr=Br?.status?.running??!1,{data:ur}=Qe({queryKey:["spoolbuddy-devices"],queryFn:()=>Wr.getDevices(),refetchInterval:15e3}),Hr=ur?.length??0,or=ur?.some(_e=>_e.online)??!1,{data:ki}=Qe({queryKey:["obico-status"],queryFn:oe.getObicoStatus,refetchInterval:15e3}),Oi=!!(ki?.is_running&&ki?.enabled),{data:yc}=Qe({queryKey:["ffmpeg-status"],queryFn:oe.checkFfmpeg}),{data:yl}=Qe({queryKey:["version"],queryFn:oe.getVersion}),Pt=!l||m("library:purge"),{data:Dn}=Qe({queryKey:["library-trash-settings"],queryFn:()=>oe.getLibraryTrashSettings(),enabled:Pt}),mr=ot({mutationFn:_e=>oe.updateLibraryTrashSettings(_e),onSuccess:()=>{t.invalidateQueries({queryKey:["library-trash-settings"]}),o(i("settings.toast.settingsSaved"),"success")},onError:_e=>o(_e.message||i("libraryAutoPurge.saveFailed"),"error")}),Wt=_e=>{Dn&&mr.mutate({retention_days:Dn.retention_days,auto_purge_enabled:Dn.auto_purge_enabled,auto_purge_days:Dn.auto_purge_days,auto_purge_include_never_printed:Dn.auto_purge_include_never_printed,..._e})},Ms=!l||m("archives:purge"),{data:vo}=Qe({queryKey:["archive-purge-settings"],queryFn:()=>oe.getArchivePurgeSettings(),enabled:Ms}),td=ot({mutationFn:_e=>oe.updateArchivePurgeSettings(_e),onSuccess:()=>{t.invalidateQueries({queryKey:["archive-purge-settings"]}),o(i("settings.toast.settingsSaved"),"success")},onError:_e=>o(_e.message||i("archiveAutoPurge.saveFailed"),"error")}),vl=_e=>{vo&&td.mutate({enabled:vo.enabled,days:vo.days,..._e})},{data:Lr,refetch:nd,isRefetching:$p}=Qe({queryKey:["updateCheck"],queryFn:oe.checkForUpdates,enabled:rt?.check_updates!==!1,staleTime:300*1e3}),{data:ls,refetch:$o}=Qe({queryKey:["updateStatus"],queryFn:oe.getUpdateStatus,refetchInterval:_e=>{const Et=_e.state.data;return Et?.status==="downloading"||Et?.status==="installing"?1e3:!1}}),{data:zi}=Qe({queryKey:["mqtt-status"],queryFn:oe.getMQTTStatus,refetchInterval:O==="network"?5e3:!1}),{data:wl}=Qe({queryKey:["github-backup-status"],queryFn:oe.getGitHubBackupStatus}),{data:wo}=Qe({queryKey:["cloud-status"],queryFn:oe.getCloudStatus}),{data:ha={advanced_auth_enabled:!1,smtp_configured:!1}}=Qe({queryKey:["advancedAuthStatus"],queryFn:()=>oe.getAdvancedAuthStatus()}),{data:vc}=Qe({queryKey:["ldapStatus"],queryFn:()=>oe.getLDAPStatus()}),{data:Im}=Qe({queryKey:["twoFAStatus"],queryFn:()=>oe.get2FAStatus()}),{data:ru=[]}=Qe({queryKey:["oidcProvidersAll"],queryFn:()=>oe.getOIDCProvidersAll(),enabled:d}),{data:rd=[],isLoading:Vp}=Qe({queryKey:["users"],queryFn:()=>oe.getUsers(),enabled:l&&m("users:read")}),{data:ka=[],isLoading:Es}=Qe({queryKey:["groups"],queryFn:()=>oe.getGroups(),enabled:l&&m("groups:read")}),Vo=ot({mutationFn:_e=>oe.createUser(_e),onSuccess:()=>{t.invalidateQueries({queryKey:["users"]}),t.invalidateQueries({queryKey:["groups"]}),He(!1),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]}),o(i("settings.toast.userCreated"))},onError:_e=>{o(_e.message,"error")}}),wc=ot({mutationFn:({id:_e,data:Et})=>oe.updateUser(_e,Et),onSuccess:()=>{t.invalidateQueries({queryKey:["users"]}),t.invalidateQueries({queryKey:["groups"]}),ht(!1),qt(null),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]}),o(i("settings.toast.userUpdated"))},onError:_e=>{o(_e.message,"error")}}),Sl=ot({mutationFn:({id:_e,deleteItems:Et})=>oe.deleteUser(_e,Et),onSuccess:()=>{t.invalidateQueries({queryKey:["users"]}),o(i("settings.toast.userDeleted")),Gt(null),an(null)},onError:_e=>{o(_e.message,"error")}}),ad=ot({mutationFn:_e=>oe.resetUserPassword({user_id:_e}),onSuccess:_e=>{o(_e.message,"success")},onError:_e=>{o(_e.message,"error")}}),Gp=async _e=>{Gt(_e),dn(!0);try{const Et=await oe.getUserItemsCount(_e);an(Et)}catch{an({archives:0,queue_items:0,library_files:0})}finally{dn(!1)}},_l=ot({mutationFn:_e=>oe.deleteGroup(_e),onSuccess:()=>{t.invalidateQueries({queryKey:["groups"]}),o(i("settings.toast.groupDeleted"))},onError:_e=>{o(_e.message,"error")}}),id=()=>{const _e=ha?.advanced_auth_enabled||!1;if(!jt.username){o(i("settings.toast.fillRequiredFields"),"error");return}if(_e&&!jt.email){o("Email is required when advanced authentication is enabled","error");return}if(!_e){if(!jt.password){o(i("settings.toast.fillRequiredFields"),"error");return}if(jt.password!==jt.confirmPassword){o(i("settings.toast.passwordsDoNotMatch"),"error");return}if(jt.password.length<6){o(i("settings.toast.passwordTooShort"),"error");return}}Vo.mutate({username:jt.username,password:_e?void 0:jt.password,email:jt.email||void 0,role:jt.role,group_ids:jt.group_ids.length>0?jt.group_ids:void 0})},Om=_e=>{if(jt.password){if(jt.password!==jt.confirmPassword){o(i("settings.toast.passwordsDoNotMatch"),"error");return}if(jt.password.length<6){o(i("settings.toast.passwordTooShort"),"error");return}}const Et={username:jt.username||void 0,password:jt.password||void 0,email:jt.email||void 0,role:jt.role,group_ids:jt.group_ids};Et.password||delete Et.password,wc.mutate({id:_e,data:Et})},sd=_e=>{qt(_e.id),Jt({username:_e.username,password:"",email:_e.email||"",confirmPassword:"",role:_e.role,group_ids:_e.groups?.map(Et=>Et.id)||[]}),ht(!0)},od=_e=>{Jt(Et=>({...Et,group_ids:Et.group_ids.includes(_e)?Et.group_ids.filter(Fn=>Fn!==_e):[...Et.group_ids,_e]}))},au=ot({mutationFn:oe.applyUpdate,onSuccess:_e=>{_e.is_ha_addon||_e.is_docker?o(_e.message,"error"):$o()}}),[ci,iu]=w.useState(null),zm=ot({mutationFn:oe.testAllNotificationProviders,onSuccess:_e=>{iu(_e),t.invalidateQueries({queryKey:["notification-providers"]}),_e.failed===0?o(`All ${_e.tested} providers tested successfully!`,"success"):o(`${_e.success}/${_e.tested} providers succeeded`,_e.failed>0?"error":"success")},onError:_e=>{o(`Failed to test providers: ${_e.message}`,"error")}}),Ys=ot({mutationFn:async _e=>{if(!Ke)return{success:0,failed:0};const Et=Ke.filter(kn=>kn.enabled),Fn=await Promise.all(Et.map(async kn=>{try{return await oe.controlSmartPlug(kn.id,_e),{success:!0}}catch{return{success:!1}}}));return{success:Fn.filter(kn=>kn.success).length,failed:Fn.filter(kn=>!kn.success).length}},onSuccess:(_e,Et)=>{t.invalidateQueries({queryKey:["smart-plugs"]}),t.invalidateQueries({queryKey:["smart-plugs-energy"]}),_e.failed===0?o(`All ${_e.success} plugs turned ${Et}`,"success"):o(`${_e.success} plugs turned ${Et}, ${_e.failed} failed`,"error")},onError:_e=>{o(`Failed: ${_e.message}`,"error")}}),su=w.useRef(null),kl=w.useRef(null),Nl=w.useRef(!1),ou=w.useRef(!0);w.useEffect(()=>{if(rt&&!k){const _e={...rt,external_url:rt.external_url||window.location.origin};E(_e),setTimeout(()=>{ou.current=!1},100)}},[rt,k]);const Um=ot({mutationFn:oe.updateSettings,onSuccess:_e=>{t.setQueryData(["settings"],_e),t.invalidateQueries({queryKey:["archiveStats"]}),o(i("settings.toast.settingsSaved"),"success")},onError:_e=>{o(`Failed to save: ${_e.message}`,"error")},onSettled:()=>{Nl.current=!1}}),Zg=ot({mutationFn:({id:_e,data:Et})=>oe.updatePrinter(_e,Et),onSuccess:()=>{t.invalidateQueries({queryKey:["printers"]}),o(i("settings.toast.cameraSettingsSaved"),"success")},onError:_e=>{o(`Failed to update printer: ${_e.message}`,"error")}});w.useEffect(()=>{if(!(ou.current||!k||!rt||l&&!m("settings:update")||!(rt.auto_archive!==k.auto_archive||rt.save_thumbnails!==k.save_thumbnails||rt.capture_finish_photo!==k.capture_finish_photo||rt.default_filament_cost!==k.default_filament_cost||rt.currency!==k.currency||rt.energy_cost_per_kwh!==k.energy_cost_per_kwh||rt.energy_tracking_mode!==k.energy_tracking_mode||rt.check_updates!==k.check_updates||(rt.check_printer_firmware??!0)!==(k.check_printer_firmware??!0)||(rt.include_beta_updates??!1)!==(k.include_beta_updates??!1)||rt.notification_language!==k.notification_language||(rt.bed_cooled_threshold??35)!==(k.bed_cooled_threshold??35)||rt.ams_humidity_good!==k.ams_humidity_good||rt.ams_humidity_fair!==k.ams_humidity_fair||rt.ams_temp_good!==k.ams_temp_good||rt.ams_temp_fair!==k.ams_temp_fair||rt.ams_history_retention_days!==k.ams_history_retention_days||rt.disable_filament_warnings!==k.disable_filament_warnings||rt.prefer_lowest_filament!==k.prefer_lowest_filament||(rt.queue_drying_enabled??!1)!==(k.queue_drying_enabled??!1)||(rt.queue_drying_block??!1)!==(k.queue_drying_block??!1)||(rt.ambient_drying_enabled??!1)!==(k.ambient_drying_enabled??!1)||(rt.drying_presets??"")!==(k.drying_presets??"")||rt.per_printer_mapping_expanded!==k.per_printer_mapping_expanded||rt.date_format!==k.date_format||rt.time_format!==k.time_format||rt.default_printer_id!==k.default_printer_id||rt.ftp_retry_enabled!==k.ftp_retry_enabled||rt.ftp_retry_count!==k.ftp_retry_count||rt.ftp_retry_delay!==k.ftp_retry_delay||rt.ftp_timeout!==k.ftp_timeout||rt.mqtt_enabled!==k.mqtt_enabled||rt.mqtt_broker!==k.mqtt_broker||rt.mqtt_port!==k.mqtt_port||rt.mqtt_username!==k.mqtt_username||rt.mqtt_password!==k.mqtt_password||rt.mqtt_topic_prefix!==k.mqtt_topic_prefix||rt.mqtt_use_tls!==k.mqtt_use_tls||rt.external_url!==k.external_url||rt.ha_enabled!==k.ha_enabled||rt.ha_url!==k.ha_url||rt.ha_token!==k.ha_token||(rt.library_archive_mode??"ask")!==(k.library_archive_mode??"ask")||Number(rt.library_disk_warning_gb??5)!==Number(k.library_disk_warning_gb??5)||(rt.camera_view_mode??"window")!==(k.camera_view_mode??"window")||(rt.preferred_slicer??"bambu_studio")!==(k.preferred_slicer??"bambu_studio")||(rt.use_slicer_api??!1)!==(k.use_slicer_api??!1)||(rt.orcaslicer_api_url??"")!==(k.orcaslicer_api_url??"")||(rt.bambu_studio_api_url??"")!==(k.bambu_studio_api_url??"")||rt.prometheus_enabled!==k.prometheus_enabled||rt.prometheus_token!==k.prometheus_token||(rt.user_notifications_enabled??!0)!==(k.user_notifications_enabled??!0)||(rt.default_bed_levelling??!0)!==(k.default_bed_levelling??!0)||(rt.default_flow_cali??!1)!==(k.default_flow_cali??!1)||(rt.default_vibration_cali??!0)!==(k.default_vibration_cali??!0)||(rt.default_layer_inspect??!1)!==(k.default_layer_inspect??!1)||(rt.default_timelapse??!1)!==(k.default_timelapse??!1)||(rt.stagger_group_size??2)!==(k.stagger_group_size??2)||(rt.stagger_interval_minutes??5)!==(k.stagger_interval_minutes??5)||(rt.require_plate_clear??!1)!==(k.require_plate_clear??!1)))&&!Nl.current)return su.current&&clearTimeout(su.current),su.current=setTimeout(()=>{if(Nl.current)return;Nl.current=!0;const Et={auto_archive:k.auto_archive,save_thumbnails:k.save_thumbnails,capture_finish_photo:k.capture_finish_photo,default_filament_cost:k.default_filament_cost,currency:k.currency,energy_cost_per_kwh:k.energy_cost_per_kwh,energy_tracking_mode:k.energy_tracking_mode,check_updates:k.check_updates,check_printer_firmware:k.check_printer_firmware,include_beta_updates:k.include_beta_updates,notification_language:k.notification_language,bed_cooled_threshold:k.bed_cooled_threshold,ams_humidity_good:k.ams_humidity_good,ams_humidity_fair:k.ams_humidity_fair,ams_temp_good:k.ams_temp_good,ams_temp_fair:k.ams_temp_fair,ams_history_retention_days:k.ams_history_retention_days,disable_filament_warnings:k.disable_filament_warnings,prefer_lowest_filament:k.prefer_lowest_filament,queue_drying_enabled:k.queue_drying_enabled,queue_drying_block:k.queue_drying_block,ambient_drying_enabled:k.ambient_drying_enabled,drying_presets:k.drying_presets,per_printer_mapping_expanded:k.per_printer_mapping_expanded,date_format:k.date_format,time_format:k.time_format,default_printer_id:k.default_printer_id,ftp_retry_enabled:k.ftp_retry_enabled,ftp_retry_count:k.ftp_retry_count,ftp_retry_delay:k.ftp_retry_delay,ftp_timeout:k.ftp_timeout,mqtt_enabled:k.mqtt_enabled,mqtt_broker:k.mqtt_broker,mqtt_port:k.mqtt_port,mqtt_username:k.mqtt_username,mqtt_password:k.mqtt_password,mqtt_topic_prefix:k.mqtt_topic_prefix,mqtt_use_tls:k.mqtt_use_tls,external_url:k.external_url,ha_enabled:k.ha_enabled,ha_url:k.ha_url,ha_token:k.ha_token,library_archive_mode:k.library_archive_mode,library_disk_warning_gb:k.library_disk_warning_gb,camera_view_mode:k.camera_view_mode,preferred_slicer:k.preferred_slicer,use_slicer_api:k.use_slicer_api,orcaslicer_api_url:k.orcaslicer_api_url,bambu_studio_api_url:k.bambu_studio_api_url,prometheus_enabled:k.prometheus_enabled,prometheus_token:k.prometheus_token,user_notifications_enabled:k.user_notifications_enabled,default_bed_levelling:k.default_bed_levelling,default_flow_cali:k.default_flow_cali,default_vibration_cali:k.default_vibration_cali,default_layer_inspect:k.default_layer_inspect,default_timelapse:k.default_timelapse,stagger_group_size:k.stagger_group_size,stagger_interval_minutes:k.stagger_interval_minutes,require_plate_clear:k.require_plate_clear};Um.mutate(Et)},500),()=>{su.current&&clearTimeout(su.current)}},[k,rt,Um,l,m,o,i]);const hn=w.useCallback((_e,Et)=>{if(l&&!m("settings:update")){o(i("settings.toast.noPermissionUpdate"),"error");return}E(Fn=>Fn?{...Fn,[_e]:Et}:null)},[l,m,o,i]),Bm=async(_e,Et,Fn)=>{if(!Et){o(i("settings.toast.enterCameraUrl"),"error");return}We(kn=>({...kn,[_e]:!0})),dt(kn=>({...kn,[_e]:null}));try{const kn=await oe.testExternalCamera(_e,Et,Fn);dt(it=>({...it,[_e]:kn})),kn.success?o(i("settings.toast.cameraConnected",{resolution:kn.resolution||""}),"success"):o(kn.error||i("settings.toast.connectionFailed"),"error")}catch(kn){const it=kn instanceof Error?kn.message:i("settings.toast.testFailed");dt(Dt=>({...Dt,[_e]:{success:!1,error:it}})),o(it,"error")}finally{We(kn=>({...kn,[_e]:!1}))}},[Hm,eb]=w.useState({}),Wp=w.useRef({}),Go=w.useRef(new Set);w.useEffect(()=>{if(On){const _e={};On.forEach(Et=>{Et.external_camera_url&&!Go.current.has(Et.id)&&(_e[Et.id]=Et.external_camera_url,Go.current.add(Et.id))}),Object.keys(_e).length>0&&eb(Et=>({...Et,..._e}))}},[On]);const Wo=(_e,Et)=>{eb(Fn=>({...Fn,[_e]:Et})),Wp.current[_e]&&clearTimeout(Wp.current[_e]),Wp.current[_e]=setTimeout(()=>{Zg.mutate({id:_e,data:{external_camera_url:Et||null}})},800)},Sc=(_e,Et)=>{const Fn={};Et.type!==void 0&&(Fn.external_camera_type=Et.type||null),Et.enabled!==void 0&&(Fn.external_camera_enabled=Et.enabled),Et.rotation!==void 0&&(Fn.camera_rotation=Et.rotation),Zg.mutate({id:_e,data:Fn})};if(Ct||!k)return a.jsx("div",{className:"p-4 md:p-8 flex justify-center",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})});const Xy=Trt().map(_e=>({..._e,label:i(_e.labelKey,_e.labelFallback??_e.labelKey)})),qm=pe.trim().toLowerCase(),Kp=qm?Xy.filter(_e=>_e.label.toLowerCase().includes(qm)||_e.keywords.toLowerCase().includes(qm)).slice(0,8):[],$m=_e=>{q(_e.tab),_e.subTab&&G(_e.subTab),be(""),setTimeout(()=>{const Et=document.getElementById(_e.anchor);Et&&(Et.scrollIntoView({behavior:"smooth",block:"start"}),Et.classList.add("ring-2","ring-bambu-green"),setTimeout(()=>Et.classList.remove("ring-2","ring-bambu-green"),1500))},50)};return a.jsx(Vye,{density:"dense",children:a.jsxs("div",{className:"p-4 md:p-6",children:[a.jsxs("div",{className:"mb-4 flex flex-col sm:flex-row sm:items-center sm:justify-between gap-3",children:[a.jsxs("div",{className:"flex items-baseline gap-3",children:[a.jsx("h1",{className:"text-2xl font-bold text-white",children:i("settings.title")}),a.jsx("p",{className:"text-sm text-bambu-gray hidden md:block",children:i("settings.configureBambuddy")})]}),a.jsxs("div",{className:"relative sm:w-72",children:[a.jsx(Nr,{className:"w-4 h-4 text-bambu-gray absolute left-3 top-1/2 -translate-y-1/2 pointer-events-none"}),a.jsx("input",{type:"text",value:pe,onChange:_e=>be(_e.target.value),placeholder:i("settings.searchPlaceholder","Search settings…"),className:"w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green"}),pe&&a.jsx("button",{onClick:()=>be(""),className:"absolute right-2 top-1/2 -translate-y-1/2 p-1 text-bambu-gray hover:text-white","aria-label":"Clear",children:a.jsx(Bt,{className:"w-3.5 h-3.5"})}),Kp.length>0&&a.jsx("div",{className:"absolute top-full left-0 right-0 mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-30 overflow-hidden",children:Kp.map(_e=>a.jsxs("button",{onClick:()=>$m(_e),className:"w-full px-3 py-2 text-left hover:bg-bambu-dark-tertiary transition-colors border-b border-bambu-dark-tertiary last:border-b-0",children:[a.jsx("p",{className:"text-sm text-white",children:_e.label}),a.jsxs("p",{className:"text-xs text-bambu-gray",children:[i(`settings.tabs.${_e.tab==="virtual-printer"?"virtualPrinter":_e.tab==="failure-detection"?"failureDetection":_e.tab}`),_e.subTab?` › ${i(`settings.tabs.${_e.subTab}`,_e.subTab)}`:""]})]},_e.anchor))}),qm&&Kp.length===0&&a.jsx("div",{className:"absolute top-full left-0 right-0 mt-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-30 p-3",children:a.jsx("p",{className:"text-xs text-bambu-gray italic",children:i("settings.noSearchResults","No matching settings.")})})]})]}),a.jsxs("div",{className:"flex flex-col lg:flex-row gap-4 lg:gap-6",children:[a.jsxs("nav",{className:"flex flex-wrap gap-1 border-b border-bambu-dark-tertiary lg:flex-col lg:flex-nowrap lg:gap-0 lg:border-b-0 lg:border-r lg:w-48 lg:flex-shrink-0 lg:self-start lg:sticky lg:top-4",children:[a.jsxs("button",{onClick:()=>q("general"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="general"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(mS,{className:"w-4 h-4"}),i("settings.tabs.general")]}),a.jsxs("button",{onClick:()=>q("plugs"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="plugs"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(tc,{className:"w-4 h-4"}),i("settings.tabs.smartPlugs"),Ke&&Ke.length>0&&a.jsx("span",{className:"text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full",children:Ke.length})]}),a.jsxs("button",{onClick:()=>q("notifications"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="notifications"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(ap,{className:"w-4 h-4"}),i("settings.tabs.notifications"),wn&&wn.length>0&&a.jsx("span",{className:"text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full",children:wn.length})]}),a.jsxs("button",{onClick:()=>q("queue"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="queue"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(jN,{className:"w-4 h-4"}),i("settings.tabs.queue","Workflow")]}),a.jsxs("button",{onClick:()=>q("filament"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="filament"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(cge,{className:"w-4 h-4"}),i("settings.tabs.filament")]}),a.jsxs("button",{onClick:()=>q("network"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="network"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(cp,{className:"w-4 h-4"}),i("settings.tabs.network"),a.jsx("span",{className:`w-2 h-2 rounded-full ${zi?.enabled?"bg-green-400":"bg-gray-500"}`})]}),a.jsxs("button",{onClick:()=>q("apikeys"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="apikeys"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(ao,{className:"w-4 h-4"}),i("settings.tabs.apiKeys"),_n&&_n.length>0&&a.jsx("span",{className:"text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full",children:_n.length})]}),a.jsxs("button",{onClick:()=>q("virtual-printer"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="virtual-printer"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(Mr,{className:"w-4 h-4"}),i("settings.tabs.virtualPrinter"),a.jsx("span",{className:`w-2 h-2 rounded-full ${Kr?"bg-green-400":"bg-gray-500"}`})]}),a.jsxs("button",{onClick:()=>q("spoolbuddy"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="spoolbuddy"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(dJ,{className:"w-4 h-4"}),i("settings.tabs.spoolbuddy"),Hr>0&&a.jsx("span",{className:"text-xs bg-bambu-dark-tertiary px-1.5 py-0.5 rounded-full",children:Hr}),a.jsx("span",{className:`w-2 h-2 rounded-full ${or?"bg-green-400":"bg-gray-500"}`})]}),a.jsxs("button",{onClick:()=>q("failure-detection"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="failure-detection"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(uJ,{className:"w-4 h-4"}),i("settings.tabs.failureDetection"),a.jsx("span",{className:`w-2 h-2 rounded-full ${Oi?"bg-green-400":"bg-gray-500"}`})]}),a.jsxs("button",{onClick:()=>q("users"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="users"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(Ku,{className:"w-4 h-4"}),i("settings.tabs.users"),l&&a.jsx("span",{className:"w-2 h-2 rounded-full bg-green-400"})]}),a.jsxs("button",{onClick:()=>q("backup"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${O==="backup"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(Jl,{className:"w-4 h-4"}),i("settings.tabs.backup"),a.jsx("span",{className:`w-2 h-2 rounded-full ${wo?.is_authenticated&&wl?.configured&&wl?.enabled?"bg-green-400":"bg-gray-500"}`})]})]}),a.jsxs("div",{className:"flex-1 min-w-0",children:[O==="general"&&a.jsxs("div",{className:"flex flex-col lg:flex-row gap-4 lg:gap-6",children:[a.jsxs("div",{className:"space-y-3 flex-1 lg:max-w-xl",children:[a.jsxs(wt,{id:"card-general",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.general")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[a.jsx(qs,{className:"w-4 h-4 inline mr-1"}),i("settings.language")]}),a.jsxs("div",{className:"relative",children:[a.jsx("select",{value:s.language,onChange:_e=>{const Et=_e.target.value;if(l&&!m("settings:update")){o(i("settings.toast.noPermissionUpdate"),"error");return}s.changeLanguage(Et),Um.mutate({language:Et})},className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:CH.map(_e=>a.jsxs("option",{value:_e.code,children:[_e.nativeName," (",_e.name,")"]},_e.code))}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.languageDescription")})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.defaultView")}),a.jsxs("div",{className:"relative",children:[a.jsx("select",{value:Y,onChange:_e=>tt(_e.target.value),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:Zu.map(_e=>a.jsx("option",{value:_e.to,children:i(_e.labelKey)},_e.id))}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.defaultViewDescription")})]}),a.jsxs("div",{className:"grid grid-cols-2 gap-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.dateFormat")}),a.jsxs("div",{className:"relative",children:[a.jsxs("select",{value:k.date_format||"system",onChange:_e=>hn("date_format",_e.target.value),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[a.jsx("option",{value:"system",children:i("settings.systemDefault")}),a.jsx("option",{value:"us",children:i("settings.dateFormatUs")}),a.jsx("option",{value:"eu",children:i("settings.dateFormatEu")}),a.jsx("option",{value:"iso",children:i("settings.dateFormatIso")})]}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.timeFormat")}),a.jsxs("div",{className:"relative",children:[a.jsxs("select",{value:k.time_format||"system",onChange:_e=>hn("time_format",_e.target.value),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[a.jsx("option",{value:"system",children:i("settings.systemDefault")}),a.jsx("option",{value:"12h",children:i("settings.timeFormat12")}),a.jsx("option",{value:"24h",children:i("settings.timeFormat24")})]}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.defaultPrinter")}),a.jsxs("div",{className:"relative",children:[a.jsxs("select",{value:k.default_printer_id??"",onChange:_e=>hn("default_printer_id",_e.target.value?Number(_e.target.value):null),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[a.jsx("option",{value:"",children:i("settings.noDefaultPrinter")}),On?.map(_e=>a.jsx("option",{value:_e.id,children:_e.name},_e.id))]}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.defaultPrinterDescription")})]}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.sidebarOrder")}),a.jsxs("p",{className:"text-sm text-bambu-gray",children:[i("settings.sidebarOrderDescription"),l&&m("settings:update")&&` ${i("settings.sidebarOrderSetDefaultHint")}`]})]}),a.jsxs("div",{className:"flex items-center gap-2 shrink-0",children:[a.jsxs(De,{variant:"secondary",size:"sm",onClick:nt,children:[a.jsx(Ts,{className:"w-4 h-4"}),i("settings.reset")]}),l&&m("settings:update")&&a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("span",{className:"text-sm text-bambu-gray whitespace-nowrap",children:i("settings.setDefault")}),a.jsx(Ln,{checked:Je,onChange:Ue,disabled:Ct})]})]})]})]})]}),a.jsxs(wt,{id:"card-appearance",children:[a.jsx(pn,{children:a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(lS,{className:"w-5 h-5"}),i("settings.appearance")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{className:`space-y-3 p-4 rounded-lg border ${p==="dark"?"border-bambu-green bg-bambu-green/5":"border-bambu-dark-tertiary"}`,children:[a.jsxs("h3",{className:"text-sm font-medium text-white flex items-center gap-2",children:[i("settings.darkMode"),p==="dark"&&a.jsx("span",{className:"text-xs text-bambu-green",children:i("settings.active")})]}),a.jsxs("div",{className:"grid grid-cols-3 gap-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.background")}),a.jsxs("select",{value:x,onChange:_e=>{P(_e.target.value),o(i("settings.toast.settingsSaved"),"success")},className:"w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"neutral",children:i("settings.bgNeutral")}),a.jsx("option",{value:"warm",children:i("settings.bgWarm")}),a.jsx("option",{value:"cool",children:i("settings.bgCool")}),a.jsx("option",{value:"oled",children:i("settings.bgOled")}),a.jsx("option",{value:"slate",children:i("settings.bgSlate")}),a.jsx("option",{value:"forest",children:i("settings.bgForest")})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.accent")}),a.jsxs("select",{value:v,onChange:_e=>{C(_e.target.value),o(i("settings.toast.settingsSaved"),"success")},className:"w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"green",children:i("settings.accentGreen")}),a.jsx("option",{value:"teal",children:i("settings.accentTeal")}),a.jsx("option",{value:"blue",children:i("settings.accentBlue")}),a.jsx("option",{value:"orange",children:i("settings.accentOrange")}),a.jsx("option",{value:"purple",children:i("settings.accentPurple")}),a.jsx("option",{value:"red",children:i("settings.accentRed")})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.style")}),a.jsxs("select",{value:f,onChange:_e=>{N(_e.target.value),o(i("settings.toast.settingsSaved"),"success")},className:"w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"classic",children:i("settings.styleClassic")}),a.jsx("option",{value:"glow",children:i("settings.styleGlow")}),a.jsx("option",{value:"vibrant",children:i("settings.styleVibrant")})]})]})]})]}),a.jsxs("div",{className:`space-y-3 p-4 rounded-lg border ${p==="light"?"border-bambu-green bg-bambu-green/5":"border-bambu-dark-tertiary"}`,children:[a.jsxs("h3",{className:"text-sm font-medium text-white flex items-center gap-2",children:[i("settings.lightMode"),p==="light"&&a.jsx("span",{className:"text-xs text-bambu-green",children:i("settings.active")})]}),a.jsxs("div",{className:"grid grid-cols-3 gap-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.background")}),a.jsxs("select",{value:g,onChange:_e=>{T(_e.target.value),o(i("settings.toast.settingsSaved"),"success")},className:"w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"neutral",children:i("settings.bgNeutral")}),a.jsx("option",{value:"warm",children:i("settings.bgWarm")}),a.jsx("option",{value:"cool",children:i("settings.bgCool")})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.accent")}),a.jsxs("select",{value:S,onChange:_e=>{F(_e.target.value),o(i("settings.toast.settingsSaved"),"success")},className:"w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"green",children:i("settings.accentGreen")}),a.jsx("option",{value:"teal",children:i("settings.accentTeal")}),a.jsx("option",{value:"blue",children:i("settings.accentBlue")}),a.jsx("option",{value:"orange",children:i("settings.accentOrange")}),a.jsx("option",{value:"purple",children:i("settings.accentPurple")}),a.jsx("option",{value:"red",children:i("settings.accentRed")})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.style")}),a.jsxs("select",{value:b,onChange:_e=>{A(_e.target.value),o(i("settings.toast.settingsSaved"),"success")},className:"w-full px-2 py-1.5 text-sm bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"classic",children:i("settings.styleClassic")}),a.jsx("option",{value:"glow",children:i("settings.styleGlow")}),a.jsx("option",{value:"vibrant",children:i("settings.styleVibrant")})]})]})]})]}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.themeToggleHint")})]})]}),a.jsxs(wt,{id:"card-archive",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.archiveSettings")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.autoArchivePrints")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.autoArchiveDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.auto_archive,onChange:_e=>hn("auto_archive",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.saveThumbnails")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.saveThumbnailsDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.save_thumbnails,onChange:_e=>hn("save_thumbnails",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.captureFinishPhoto")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.captureFinishPhotoDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.capture_finish_photo,onChange:_e=>hn("capture_finish_photo",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),k.capture_finish_photo&&yc&&!yc.installed&&a.jsxs("div",{className:"flex items-start gap-2 p-3 bg-yellow-500/10 border border-yellow-500/30 rounded-lg",children:[a.jsx(Cn,{className:"w-5 h-5 text-yellow-500 flex-shrink-0 mt-0.5"}),a.jsxs("div",{className:"text-sm",children:[a.jsx("p",{className:"text-yellow-500 font-medium",children:i("settings.ffmpegNotInstalled")}),a.jsx("p",{className:"text-bambu-gray mt-1",children:i("settings.ffmpegRequired")})]})]}),Ms&&vo&&a.jsxs("div",{className:"border-t border-bambu-dark-tertiary pt-3 mt-3 space-y-3",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("archiveAutoPurge.enableLabel")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("archiveAutoPurge.enableDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:vo.enabled,onChange:_e=>vl({enabled:_e.target.checked}),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("archiveAutoPurge.ageLabel")}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",min:7,max:3650,disabled:!vo.enabled,value:vo.days,onChange:_e=>vl({days:Math.max(7,Math.min(3650,parseInt(_e.target.value||"0",10)||0))}),className:"w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none disabled:opacity-50"}),a.jsx("span",{className:"text-bambu-gray",children:i("archiveAutoPurge.days")})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("archiveAutoPurge.ageDescription")})]})]})]})]})]}),a.jsxs("div",{className:"space-y-3 flex-1 lg:max-w-md",children:[a.jsxs(wt,{id:"card-camera",children:[a.jsx(pn,{children:a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(FN,{className:"w-5 h-5 text-bambu-green"}),i("settings.camera")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.cameraViewMode")}),a.jsxs("select",{value:k.camera_view_mode??"window",onChange:_e=>hn("camera_view_mode",_e.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"window",children:i("settings.newWindow")}),a.jsx("option",{value:"embedded",children:i("settings.embeddedOverlay")})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:k.camera_view_mode==="embedded"?i("settings.cameraOverlayDescription"):i("settings.cameraWindowDescription")})]}),a.jsxs("div",{className:"border-t border-bambu-dark-tertiary pt-4 mt-4",children:[a.jsx("h3",{className:"text-sm font-medium text-white mb-2",children:i("settings.externalCameras")}),a.jsx("p",{className:"text-xs text-bambu-gray mb-3",children:i("settings.externalCamerasDescription")}),On&&On.length>0?a.jsx("div",{className:"space-y-3",children:On.map(_e=>a.jsxs("div",{className:"p-3 bg-bambu-dark rounded-lg",children:[a.jsxs("div",{className:"flex items-center justify-between mb-2",children:[a.jsx("span",{className:"text-white font-medium text-sm",children:_e.name}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:_e.external_camera_enabled,onChange:Et=>Sc(_e.id,{enabled:Et.target.checked}),className:"sr-only peer"}),a.jsx("div",{className:"w-9 h-5 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:border-gray-300 after:border after:rounded-full after:h-4 after:w-4 after:transition-all peer-checked:bg-bambu-green"})]})]}),_e.external_camera_enabled&&a.jsxs("div",{className:"space-y-2 mt-2",children:[a.jsx("input",{type:"text",placeholder:_e.external_camera_type==="usb"?i("settings.cameraPlaceholderUsb"):i("settings.cameraPlaceholderUrl"),value:Hm[_e.id]??_e.external_camera_url??"",onChange:Et=>Wo(_e.id,Et.target.value),className:"w-full px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none"}),a.jsxs("div",{className:"flex gap-2",children:[a.jsxs("select",{value:_e.external_camera_type||"mjpeg",onChange:Et=>Sc(_e.id,{type:Et.target.value}),className:"flex-1 px-3 py-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-sm focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"mjpeg",children:i("settings.cameraTypeMjpeg")}),a.jsx("option",{value:"rtsp",children:i("settings.cameraTypeRtsp")}),a.jsx("option",{value:"snapshot",children:i("settings.cameraTypeSnapshot")}),a.jsx("option",{value:"usb",children:i("settings.cameraTypeUsb")})]}),a.jsx(De,{size:"sm",variant:"secondary",onClick:()=>Bm(_e.id,Hm[_e.id]??_e.external_camera_url??"",_e.external_camera_type||"mjpeg"),disabled:Ae[_e.id]||!(Hm[_e.id]??_e.external_camera_url),children:Ae[_e.id]?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):i("settings.test")})]}),Le[_e.id]&&a.jsx("div",{className:`text-xs flex items-center gap-1 ${Le[_e.id]?.success?"text-green-500":"text-red-500"}`,children:Le[_e.id]?.success?a.jsxs(a.Fragment,{children:[a.jsx(wr,{className:"w-3 h-3"}),i("settings.connected"),Le[_e.id]?.resolution&&` (${Le[_e.id]?.resolution})`]}):a.jsxs(a.Fragment,{children:[a.jsx(Da,{className:"w-3 h-3"}),Le[_e.id]?.error||i("settings.toast.connectionFailed")]})}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("label",{className:"text-xs text-bambu-gray",children:i("settings.cameraRotation")}),a.jsxs("select",{value:_e.camera_rotation||0,onChange:Et=>Sc(_e.id,{rotation:parseInt(Et.target.value)}),className:"px-2 py-1 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded text-white text-xs focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:0,children:"0°"}),a.jsx("option",{value:90,children:"90°"}),a.jsx("option",{value:180,children:"180°"}),a.jsx("option",{value:270,children:"270°"})]})]})]})]},_e.id))}):a.jsx("p",{className:"text-xs text-bambu-gray italic",children:i("settings.noPrintersConfigured")})]})]})]}),a.jsxs(wt,{id:"card-cost",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.costTracking")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.currency")}),a.jsx("select",{value:k.currency,onChange:_e=>hn("currency",_e.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:$7e.map(_e=>a.jsx("option",{value:_e.code,children:_e.label},_e.code))})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.defaultFilamentCost")}),a.jsxs("div",{className:"relative",children:[a.jsx("span",{className:"absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray text-sm pointer-events-none",children:Mo(k.currency)}),a.jsx("input",{type:"number",step:"0.01",min:"0",value:k.default_filament_cost,onChange:_e=>hn("default_filament_cost",parseFloat(_e.target.value)||0),style:{paddingLeft:`${Math.max(2,Mo(k.currency).length*.6+1)}rem`},className:"w-full pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.electricityCost")}),a.jsxs("div",{className:"relative",children:[a.jsx("span",{className:"absolute left-3 top-1/2 -translate-y-1/2 text-bambu-gray text-sm pointer-events-none",children:Mo(k.currency)}),a.jsx("input",{type:"number",step:"0.001",min:"0",value:k.energy_cost_per_kwh,onChange:_e=>hn("energy_cost_per_kwh",parseFloat(_e.target.value)||0),style:{paddingLeft:`${Math.max(2,Mo(k.currency).length*.6+1)}rem`},className:"w-full pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.energyDisplayMode")}),a.jsxs("select",{value:k.energy_tracking_mode||"total",onChange:_e=>hn("energy_tracking_mode",_e.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"print",children:i("settings.printsOnly")}),a.jsx("option",{value:"total",children:i("settings.totalConsumption")})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:k.energy_tracking_mode==="print"?i("settings.energyModePrintDescription"):i("settings.energyModeTotalDescription")})]})]})]}),a.jsxs(wt,{id:"card-filemanager",children:[a.jsx(pn,{children:a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(Ns,{className:"w-5 h-5 text-bambu-green"}),i("settings.fileManager")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.createArchiveEntry")}),a.jsxs("select",{value:k.library_archive_mode??"ask",onChange:_e=>hn("library_archive_mode",_e.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"always",children:i("settings.archiveMode.always")}),a.jsx("option",{value:"never",children:i("settings.archiveMode.never")}),a.jsx("option",{value:"ask",children:i("settings.archiveMode.ask")})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.createArchiveEntryDescription")})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.lowDiskSpaceWarning")}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",min:"0.5",max:"100",step:"0.5",value:k.library_disk_warning_gb??5,onChange:_e=>hn("library_disk_warning_gb",parseFloat(_e.target.value)||5),className:"w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("span",{className:"text-bambu-gray",children:"GB"})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.lowDiskSpaceDescription")})]}),Pt&&Dn&&a.jsxs("div",{className:"border-t border-bambu-dark-tertiary pt-3 mt-3 space-y-3",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("libraryAutoPurge.enableLabel")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("libraryAutoPurge.enableDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:Dn.auto_purge_enabled,onChange:_e=>Wt({auto_purge_enabled:_e.target.checked}),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("libraryAutoPurge.ageLabel")}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",min:7,max:3650,disabled:!Dn.auto_purge_enabled,value:Dn.auto_purge_days,onChange:_e=>Wt({auto_purge_days:Math.max(7,Math.min(3650,parseInt(_e.target.value||"0",10)||0))}),className:"w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none disabled:opacity-50"}),a.jsx("span",{className:"text-bambu-gray",children:i("libraryAutoPurge.days")})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("libraryAutoPurge.ageDescription")})]}),a.jsxs("label",{className:"flex items-center gap-2 text-sm text-white cursor-pointer",children:[a.jsx("input",{type:"checkbox",disabled:!Dn.auto_purge_enabled,checked:Dn.auto_purge_include_never_printed,onChange:_e=>Wt({auto_purge_include_never_printed:_e.target.checked}),className:"rounded border-gray-300 disabled:opacity-50"}),i("libraryAutoPurge.includeNeverPrinted")]})]})]})]})]}),a.jsxs("div",{className:"space-y-3 flex-1 lg:max-w-sm",children:[a.jsx(ort,{}),a.jsxs(wt,{id:"card-updates",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.updates")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-xs font-medium text-bambu-gray uppercase tracking-wider",children:i("settings.printerFirmware")}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.checkPrinterFirmware")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.checkFirmwareDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.check_printer_firmware??!0,onChange:_e=>hn("check_printer_firmware",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsx("div",{className:"border-t border-bambu-dark-tertiary pt-4",children:a.jsx("p",{className:"text-xs font-medium text-bambu-gray uppercase tracking-wider mb-4",children:i("settings.bambuddySoftware")})}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.checkForUpdatesLabel")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.autoCheckDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.check_updates,onChange:_e=>hn("check_updates",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{className:`flex items-center justify-between ${k.check_updates?"":"opacity-50"}`,children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.includeBetaUpdates")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.includeBetaUpdatesDesc")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.include_beta_updates??!1,onChange:_e=>hn("include_beta_updates",_e.target.checked),disabled:!k.check_updates,className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{children:[a.jsxs("div",{className:"flex items-center justify-between mb-2",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.currentVersion")}),a.jsxs("p",{className:"text-sm text-bambu-gray",children:["v",yl?.version||"..."]})]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>nd(),disabled:$p,children:[$p?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(sr,{className:"w-4 h-4"}),i("settings.checkNow")]})]}),Lr?.update_available?a.jsxs("div",{className:"mt-4 p-3 bg-bambu-green/10 border border-bambu-green/30 rounded-lg",children:[a.jsxs("div",{className:"flex items-start justify-between",children:[a.jsxs("div",{children:[a.jsxs("p",{className:"text-bambu-green font-medium",children:["Update available: v",Lr.latest_version]}),Lr.release_name&&Lr.release_name!==Lr.latest_version&&a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:Lr.release_name})]}),a.jsxs("div",{className:"flex items-center gap-2",children:[Lr.release_notes&&a.jsx("button",{onClick:()=>Oe(!0),className:"text-bambu-gray hover:text-white transition-colors text-sm underline",children:i("settings.releaseNotes")}),Lr.release_url&&a.jsx("a",{href:Lr.release_url,target:"_blank",rel:"noopener noreferrer",className:"text-bambu-gray hover:text-white transition-colors",title:i("settings.viewReleaseOnGitHub"),children:a.jsx(Ar,{className:"w-4 h-4"})})]})]}),ls?.status==="downloading"||ls?.status==="installing"?a.jsxs("div",{className:"mt-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-sm text-bambu-gray",children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),a.jsx("span",{children:ls.message})]}),a.jsx("div",{className:"mt-2 w-full bg-bambu-dark-tertiary rounded-full h-2",children:a.jsx("div",{className:"bg-bambu-green h-2 rounded-full transition-all duration-300",style:{width:`${ls.progress}%`}})})]}):ls?.status==="complete"?a.jsx("div",{className:"mt-3 p-2 bg-bambu-green/20 rounded text-sm text-bambu-green",children:ls.message}):ls?.status==="error"?a.jsx("div",{className:"mt-3 p-2 bg-red-500/20 rounded text-sm text-red-400",children:ls.error||ls.message}):Lr?.is_ha_addon?a.jsx("div",{className:"mt-3 p-3 bg-bambu-dark-tertiary rounded-lg",children:a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.updateViaHomeAssistant")})}):Lr?.is_docker?a.jsxs("div",{className:"mt-3 p-3 bg-bambu-dark-tertiary rounded-lg",children:[a.jsx("p",{className:"text-sm text-bambu-gray mb-2",children:i("settings.updateViaDocker")}),a.jsx("code",{className:"block text-xs bg-bambu-dark p-2 rounded text-bambu-green font-mono",children:"docker compose pull && docker compose up -d"})]}):a.jsxs(De,{className:"mt-3",onClick:()=>au.mutate(),disabled:au.isPending,children:[au.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(aa,{className:"w-4 h-4"}),i("settings.installUpdate")]})]}):Lr?.error?a.jsx("div",{className:"mt-2 p-2 bg-red-500/10 border border-red-500/30 rounded text-sm text-red-400",children:i("settings.failedToCheckUpdates",{error:Lr.error})}):Lr&&!Lr.update_available?a.jsx("p",{className:"mt-2 text-sm text-bambu-gray",children:i("settings.latestVersionRunning")}):null]})]})]}),a.jsxs(wt,{id:"card-data",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.dataManagement")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.clearNotificationLogs")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.clearNotificationLogsDescription")})]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>xe(!0),children:[a.jsx(Zt,{className:"w-4 h-4"}),i("common.clear")]})]}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.resetUiPreferences")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.resetUiPreferencesDescription")})]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>Be(!0),children:[a.jsx(Zt,{className:"w-4 h-4"}),i("settings.reset")]})]}),a.jsxs("div",{className:"pt-4 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.storageUsage","Storage Usage")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.storageUsageDescription","Breakdown of data usage by category")})]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:Ft,disabled:Lt||Se,children:[a.jsx(sr,{className:`w-4 h-4 ${Lt||Se?"animate-spin":""}`}),i("common.refresh","Refresh")]})]}),a.jsx("div",{className:"mt-3",children:Ot?a.jsxs("div",{className:"flex items-center gap-2 text-sm text-bambu-gray",children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),i("common.loading","Loading")]}):bt?a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"w-full h-3 bg-bambu-dark rounded-full overflow-hidden flex",children:bt.categories.filter(_e=>_e.bytes>0).map((_e,Et)=>a.jsx("div",{className:`${VY(_e.key,Et)} h-full`,style:{width:`${_e.percent_of_total}%`},title:`${_e.label}: ${_e.formatted}`},_e.key))}),a.jsx("div",{className:"mt-3 flex flex-wrap gap-3",children:bt.categories.filter(_e=>_e.bytes>0).map((_e,Et)=>a.jsxs("div",{className:"flex items-center gap-2 text-xs",children:[a.jsx("span",{className:`w-3 h-3 rounded-full ${VY(_e.key,Et)}`}),a.jsx("span",{className:"text-bambu-gray",children:_e.label}),a.jsx("span",{className:"text-white",children:_e.formatted}),a.jsxs("span",{className:"text-bambu-gray",children:["(",_e.percent_of_total.toFixed(1),"%)"]})]},_e.key))}),a.jsxs("div",{className:"mt-2 text-xs text-bambu-gray",children:[i("settings.storageUsageTotal","Total"),": ",a.jsx("span",{className:"text-white",children:bt.total_formatted}),bt.scan_errors>0&&a.jsxs("span",{className:"ml-2 text-amber-400",children:[i("settings.storageUsageErrors","Scan errors"),": ",bt.scan_errors]})]}),bt.other_breakdown?.length>0&&a.jsxs("div",{className:"mt-4",children:[a.jsx("p",{className:"text-xs text-bambu-gray mb-2",children:i("settings.storageUsageOtherBreakdown","Other breakdown")}),a.jsx("div",{className:"space-y-2",children:bt.other_breakdown.map(_e=>a.jsxs("div",{className:"flex items-center justify-between text-xs",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("span",{className:"text-white",children:_e.label}),a.jsx("span",{className:`px-2 py-0.5 rounded-full border ${_e.kind==="system"?"border-slate-500 text-slate-300":"border-bambu-green text-bambu-green"}`,children:_e.kind==="system"?i("settings.storageUsageSystem","System"):i("settings.storageUsageData","Data")})]}),a.jsxs("div",{className:"flex items-center gap-2 text-bambu-gray",children:[a.jsx("span",{className:"text-white",children:_e.formatted}),a.jsxs("span",{children:["(",_e.percent_of_total.toFixed(1),"%)"]})]})]},`${_e.bucket}-${_e.kind}`))})]})]}):a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.storageUsageUnavailable","Storage usage data is unavailable")})})]}),a.jsxs("div",{className:"flex items-center justify-between pt-4 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.backupRestore")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.backupRestoreDescription")})]}),a.jsxs(De,{variant:"secondary",size:"sm",onClick:()=>q("backup"),children:[a.jsx(Jl,{className:"w-4 h-4"}),i("settings.goToBackup")]})]})]})]})]})]}),O==="network"&&k&&a.jsxs("div",{className:"flex flex-col lg:flex-row gap-6",children:[a.jsxs("div",{className:"flex-1 lg:max-w-xl space-y-3",children:[a.jsxs(wt,{id:"card-externalurl",children:[a.jsx(pn,{children:a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(qs,{className:"w-5 h-5 text-blue-400"}),i("settings.externalUrl")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.externalUrlDescription")}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.bambuddyUrl")}),a.jsx("input",{type:"text",value:k.external_url??"",onChange:_e=>hn("external_url",_e.target.value),placeholder:"http://192.168.1.100:8000",className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.externalUrlHint")})]})]})]}),a.jsxs(wt,{id:"card-ftpretry",children:[a.jsx(pn,{children:a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(sr,{className:"w-5 h-5 text-blue-400"}),i("settings.ftpRetry")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.ftpRetryDescription")}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.enableRetry")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.autoRetryDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.ftp_retry_enabled??!0,onChange:_e=>hn("ftp_retry_enabled",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),k.ftp_retry_enabled&&a.jsxs("div",{className:"space-y-3 pt-2 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.retryAttempts")}),a.jsxs("div",{className:"relative w-44",children:[a.jsx("select",{value:k.ftp_retry_count??3,onChange:_e=>hn("ftp_retry_count",parseInt(_e.target.value)),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[1,2,3,4,5,6,7,8,9,10].map(_e=>a.jsx("option",{value:_e,children:i("settings.time",{count:_e})},_e))}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.retryDelay")}),a.jsxs("div",{className:"relative w-44",children:[a.jsx("select",{value:k.ftp_retry_delay??2,onChange:_e=>hn("ftp_retry_delay",parseInt(_e.target.value)),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[1,2,3,5,10,15,20,30].map(_e=>a.jsx("option",{value:_e,children:i("settings.second",{count:_e})},_e))}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.connectionTimeout")}),a.jsxs("div",{className:"relative w-44",children:[a.jsx("select",{value:k.ftp_timeout??30,onChange:_e=>hn("ftp_timeout",parseInt(_e.target.value)),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[10,15,20,30,45,60,90,120,180,300].map(_e=>a.jsx("option",{value:_e,children:i("settings.nSeconds",{count:_e})},_e))}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.increaseForWeakWifi")})]})]})]})]})]}),a.jsxs("div",{className:"flex-1 lg:max-w-xl space-y-3",children:[a.jsxs(wt,{id:"card-ha",children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(iS,{className:"w-5 h-5 text-bambu-green"}),i("settings.homeAssistant")]}),k.ha_enabled&&Ie&&a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("span",{className:`w-2.5 h-2.5 rounded-full ${Ie.success?"bg-green-400":"bg-red-400"}`}),a.jsx("span",{className:`text-sm ${Ie.success?"text-green-400":"text-red-400"}`,children:Ie.success?i("settings.connected"):i("settings.disconnected")})]})]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.homeAssistantFullDescription")}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex-1",children:[a.jsx("p",{className:"text-white",children:i("settings.enableHomeAssistant")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.homeAssistantDescription")}),k.ha_env_managed&&a.jsxs("div",{className:"flex items-center gap-1 mt-1",children:[a.jsx(Nd,{className:"w-3 h-3 text-bambu-green"}),a.jsx("span",{className:"text-xs text-bambu-green",children:i("settings.autoEnabledViaEnv")})]})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.ha_enabled??!1,onChange:_e=>hn("ha_enabled",_e.target.checked),disabled:k.ha_env_managed,className:"sr-only peer"}),a.jsx("div",{className:`w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green ${k.ha_env_managed?"opacity-60 cursor-not-allowed":""}`})]})]}),k.ha_enabled&&a.jsxs(a.Fragment,{children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[i("settings.homeAssistantUrl"),k.ha_url_from_env&&a.jsx("span",{className:"ml-2 text-xs text-bambu-green",children:i("settings.environmentManagedLabel")})]}),a.jsxs("div",{className:"relative",children:[a.jsx("input",{type:"text",value:k.ha_url??"",onChange:_e=>hn("ha_url",_e.target.value),placeholder:"http://192.168.1.100:8123",disabled:k.ha_url_from_env,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${k.ha_url_from_env?"opacity-60 cursor-not-allowed":""}`}),k.ha_url_from_env&&a.jsx(Nd,{className:"absolute right-3 top-2.5 w-4 h-4 text-bambu-gray"})]}),k.ha_url_from_env&&a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.urlFromEnvReadOnly")})]}),a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[i("settings.longLivedAccessToken"),k.ha_token_from_env&&a.jsx("span",{className:"ml-2 text-xs text-bambu-green",children:i("settings.environmentManagedLabel")})]}),a.jsxs("div",{className:"relative",children:[a.jsx("input",{type:"password",value:k.ha_token??"",onChange:_e=>hn("ha_token",_e.target.value),placeholder:"eyJ0eXAiOiJKV1QiLC...",disabled:k.ha_token_from_env,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${k.ha_token_from_env?"opacity-60 cursor-not-allowed":""}`}),k.ha_token_from_env&&a.jsx(Nd,{className:"absolute right-3 top-2.5 w-4 h-4 text-bambu-gray"})]}),k.ha_token_from_env?a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.tokenFromEnvReadOnly")}):a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.haTokenHint")})]}),k.ha_url&&k.ha_token&&a.jsx("div",{className:"pt-2 border-t border-bambu-dark-tertiary",children:a.jsxs(De,{variant:"secondary",size:"sm",disabled:Ye,onClick:async()=>{Ze(!0),Re(null);try{const _e=await oe.testHAConnection(k.ha_url,k.ha_token);Re(_e)}catch(_e){Re({success:!1,message:null,error:_e instanceof Error?_e.message:i("common.unknownError")})}finally{Ze(!1)}},children:[Ye?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(cp,{className:"w-4 h-4"}),i("settings.testConnection")]})})]})]})]}),a.jsxs(wt,{id:"card-mqtt",children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(cp,{className:"w-5 h-5 text-blue-400"}),i("settings.mqttPublishing")]}),zi?.enabled&&a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("span",{className:`w-2.5 h-2.5 rounded-full ${zi.connected?"bg-green-400":"bg-red-400"}`}),a.jsx("span",{className:`text-sm ${zi.connected?"text-green-400":"text-red-400"}`,children:zi.connected?i("settings.connected"):i("settings.disconnected")})]})]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.mqttDescription")}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.enableMqtt")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.mqttEnableDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.mqtt_enabled??!1,onChange:_e=>hn("mqtt_enabled",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),k.mqtt_enabled&&a.jsxs("div",{className:"space-y-3 pt-2 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.brokerHostname")}),a.jsx("input",{type:"text",value:k.mqtt_broker??"",onChange:_e=>hn("mqtt_broker",_e.target.value),placeholder:"mqtt.example.com or 192.168.1.100",className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]}),a.jsxs("div",{className:"flex items-end gap-4",children:[a.jsxs("div",{className:"flex-1",children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.port")}),a.jsx("input",{type:"number",min:"1",max:"65535",value:k.mqtt_port??1883,onChange:_e=>hn("mqtt_port",Math.min(65535,Math.max(1,parseInt(_e.target.value)||1883))),className:"w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]}),a.jsxs("div",{className:"flex items-center gap-3 pb-2",children:[a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.mqtt_use_tls??!1,onChange:_e=>{const Et=_e.target.checked;hn("mqtt_use_tls",Et);const Fn=k.mqtt_port??1883;Et&&Fn===1883?hn("mqtt_port",8883):!Et&&Fn===8883&&hn("mqtt_port",1883)},className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]}),a.jsx("span",{className:"text-white text-sm",children:i("settings.useTls")})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.usernameOptional")}),a.jsx("input",{type:"text",value:k.mqtt_username??"",onChange:_e=>hn("mqtt_username",_e.target.value),placeholder:i("settings.leaveEmptyForAnonymous"),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.passwordOptional")}),a.jsx("input",{type:"password",value:k.mqtt_password??"",onChange:_e=>hn("mqtt_password",_e.target.value),placeholder:i("settings.leaveEmptyForAnonymous"),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.topicPrefix")}),a.jsx("input",{type:"text",value:k.mqtt_topic_prefix??"bambuddy",onChange:_e=>hn("mqtt_topic_prefix",_e.target.value),placeholder:"bambuddy",className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.topicPrefixHint",{prefix:k.mqtt_topic_prefix||"bambuddy"})})]}),zi&&a.jsx("div",{className:"pt-3 mt-3 border-t border-bambu-dark-tertiary",children:a.jsxs("div",{className:"flex items-center gap-2 text-sm",children:[a.jsx("span",{className:`w-2 h-2 rounded-full ${zi.connected?"bg-green-400":"bg-red-400"}`}),a.jsx("span",{className:"text-bambu-gray",children:zi.connected?a.jsxs(a.Fragment,{children:[i("settings.mqttConnectedTo")," ",a.jsxs("span",{className:"text-white",children:[zi.broker,":",zi.port]})]}):i("settings.spoolmanDisconnected")})]})})]})]})]})]}),a.jsx("div",{className:"flex-1 lg:max-w-md space-y-3",children:a.jsxs(wt,{id:"card-prometheus",children:[a.jsx(pn,{children:a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(NF,{className:"w-5 h-5 text-orange-400"}),i("settings.prometheusMetrics")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.prometheusEndpointDescription")}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.enableMetricsEndpoint")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.prometheusDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.prometheus_enabled??!1,onChange:_e=>hn("prometheus_enabled",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),k.prometheus_enabled&&a.jsxs("div",{className:"space-y-3 pt-2 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.bearerTokenOptional")}),a.jsx("input",{type:"password",value:k.prometheus_token??"",onChange:_e=>hn("prometheus_token",_e.target.value),placeholder:i("settings.leaveEmptyForNoAuth"),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.bearerTokenHint")})]}),a.jsxs("div",{className:"pt-2 border-t border-bambu-dark-tertiary",children:[a.jsx("p",{className:"text-sm text-white mb-2",children:i("settings.availableMetrics")}),a.jsxs("div",{className:"text-xs text-bambu-gray space-y-1",children:[a.jsxs("p",{children:[a.jsx("code",{className:"text-orange-400",children:"bambuddy_printer_connected"})," - ",i("settings.metricsConnectionStatus")]}),a.jsxs("p",{children:[a.jsx("code",{className:"text-orange-400",children:"bambuddy_printer_state"})," - ",i("settings.metricsPrinterState")]}),a.jsxs("p",{children:[a.jsx("code",{className:"text-orange-400",children:"bambuddy_print_progress"})," - ",i("settings.metricsPrintProgress")]}),a.jsxs("p",{children:[a.jsx("code",{className:"text-orange-400",children:"bambuddy_bed_temp_celsius"})," - ",i("settings.metricsBedTemp")]}),a.jsxs("p",{children:[a.jsx("code",{className:"text-orange-400",children:"bambuddy_nozzle_temp_celsius"})," - ",i("settings.metricsNozzleTemp")]}),a.jsxs("p",{children:[a.jsx("code",{className:"text-orange-400",children:"bambuddy_prints_total"})," - ",i("settings.metricsPrintsTotal")]}),a.jsx("p",{className:"text-bambu-gray/70 italic",children:i("settings.metricsMore")})]})]})]})]})]})})]}),Ie&&a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50",children:a.jsxs("div",{className:"bg-bambu-dark-secondary rounded-lg p-6 max-w-md w-full mx-4",children:[a.jsxs("div",{className:"flex items-center gap-3 mb-4",children:[Ie.success?a.jsx(wr,{className:"w-8 h-8 text-green-400"}):a.jsx(Da,{className:"w-8 h-8 text-red-400"}),a.jsx("h3",{className:"text-lg font-medium text-white",children:Ie.success?i("settings.connectionSuccessful"):i("settings.connectionFailed")})]}),a.jsx("p",{className:"text-bambu-gray mb-6",children:Ie.success?Ie.message||i("settings.haConnectionSuccess"):Ie.error||i("settings.haConnectionFailed")}),a.jsx("div",{className:"flex justify-end",children:a.jsx(De,{variant:"primary",onClick:()=>Re(null),children:i("settings.ok")})})]})}),O==="plugs"&&a.jsxs("div",{id:"card-plugs",children:[a.jsxs("div",{className:"flex items-start justify-between mb-6",children:[a.jsxs("div",{children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",children:[a.jsx(tc,{className:"w-5 h-5 text-bambu-green"}),i("settings.smartPlugs")]}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:i("settings.smartPlugsDescription")})]}),a.jsxs("div",{className:"flex items-center gap-2 pt-1 shrink-0",children:[Ke&&Ke.filter(_e=>_e.enabled).length>1&&a.jsxs(a.Fragment,{children:[a.jsxs(De,{variant:"secondary",size:"sm",className:"whitespace-nowrap",onClick:()=>ze("on"),disabled:Ys.isPending,title:i("settings.turnAllPlugsOn"),children:[Ys.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Jd,{className:"w-4 h-4 text-bambu-green"}),i("settings.allOn")]}),a.jsxs(De,{variant:"secondary",size:"sm",className:"whitespace-nowrap",onClick:()=>ze("off"),disabled:Ys.isPending,title:i("settings.turnAllPlugsOff"),children:[Ys.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(dS,{className:"w-4 h-4 text-red-400"}),i("settings.allOff")]})]}),a.jsxs(De,{className:"whitespace-nowrap",onClick:()=>{R(null),z(!0)},children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.addSmartPlug")]})]})]}),Ke&&Ke.length>0&&a.jsxs(wt,{className:"mb-6",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",children:[a.jsx(cc,{className:"w-4 h-4 text-yellow-400"}),i("settings.energySummary"),on&&a.jsx(mt,{className:"w-4 h-4 animate-spin text-bambu-gray ml-2"})]})}),a.jsx(St,{children:Yt?a.jsxs("div",{className:"grid grid-cols-2 md:grid-cols-4 gap-4",children:[a.jsxs("div",{className:"bg-bambu-dark rounded-lg p-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-bambu-gray text-xs mb-1",children:[a.jsx(cc,{className:"w-3 h-3"}),i("settings.currentPower")]}),a.jsxs("div",{className:"text-xl font-bold text-white",children:[Yt.totalPower.toFixed(1),a.jsx("span",{className:"text-sm font-normal text-bambu-gray ml-1",children:"W"})]}),a.jsx("div",{className:"text-xs text-bambu-gray mt-1",children:i("settings.plugsOnline",{reachable:Yt.reachableCount,total:Yt.totalPlugs})})]}),a.jsxs("div",{className:"bg-bambu-dark rounded-lg p-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-bambu-gray text-xs mb-1",children:[a.jsx(da,{className:"w-3 h-3"}),i("settings.today")]}),a.jsxs("div",{className:"text-xl font-bold text-white",children:[Yt.totalToday.toFixed(3),a.jsx("span",{className:"text-sm font-normal text-bambu-gray ml-1",children:"kWh"})]}),(k?.energy_cost_per_kwh??0)>0&&a.jsxs("div",{className:"text-xs text-bambu-gray mt-1",children:["~",(Yt.totalToday*(k?.energy_cost_per_kwh??0)).toFixed(2)," ",Mo(k?.currency||"USD")]})]}),a.jsxs("div",{className:"bg-bambu-dark rounded-lg p-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-bambu-gray text-xs mb-1",children:[a.jsx(NF,{className:"w-3 h-3"}),i("settings.yesterday")]}),a.jsxs("div",{className:"text-xl font-bold text-white",children:[Yt.totalYesterday.toFixed(3),a.jsx("span",{className:"text-sm font-normal text-bambu-gray ml-1",children:"kWh"})]}),(k?.energy_cost_per_kwh??0)>0&&a.jsxs("div",{className:"text-xs text-bambu-gray mt-1",children:["~",(Yt.totalYesterday*(k?.energy_cost_per_kwh??0)).toFixed(2)," ",Mo(k?.currency||"USD")]})]}),a.jsxs("div",{className:"bg-bambu-dark rounded-lg p-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-bambu-gray text-xs mb-1",children:[a.jsx(CN,{className:"w-3 h-3"}),i("settings.total")]}),a.jsxs("div",{className:"text-xl font-bold text-white",children:[Yt.totalLifetime.toFixed(1),a.jsx("span",{className:"text-sm font-normal text-bambu-gray ml-1",children:"kWh"})]}),(k?.energy_cost_per_kwh??0)>0&&a.jsxs("div",{className:"text-xs text-bambu-gray mt-1",children:["~",(Yt.totalLifetime*(k?.energy_cost_per_kwh??0)).toFixed(2)," ",Mo(k?.currency||"USD")]})]})]}):on?null:a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.enablePlugsForSummary")})})]}),Ht?a.jsx("div",{className:"flex justify-center py-12",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})}):Ke&&Ke.length>0?a.jsx("div",{className:"grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 xl:grid-cols-4 gap-4",children:Ke.map(_e=>a.jsx(Wnt,{plug:_e,onEdit:Et=>{R(Et),z(!0)}},_e.id))}):a.jsx(wt,{children:a.jsx(St,{className:"py-12",children:a.jsxs("div",{className:"text-center text-bambu-gray",children:[a.jsx(tc,{className:"w-16 h-16 mx-auto mb-4 opacity-30"}),a.jsx("p",{className:"text-lg font-medium text-white mb-2",children:i("settings.noSmartPlugsTitle")}),a.jsx("p",{className:"text-sm mb-4",children:i("settings.noSmartPlugsDescription")}),a.jsxs(De,{onClick:()=>{R(null),z(!0)},children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.addFirstSmartPlug")]})]})})})]}),O==="notifications"&&a.jsxs("div",{className:"grid grid-cols-1 lg:grid-cols-2 gap-4",children:[a.jsxs("div",{children:[a.jsxs("div",{className:"flex items-center justify-between mb-4",children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",id:"card-providers",children:[a.jsx(ap,{className:"w-5 h-5 text-bambu-green"}),i("settings.providers")]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsxs(De,{size:"sm",variant:"secondary",onClick:()=>B(!0),children:[a.jsx(dw,{className:"w-4 h-4"}),i("settings.log")]}),wn&&wn.length>0&&a.jsxs(De,{size:"sm",variant:"secondary",onClick:()=>{iu(null),zm.mutate()},disabled:zm.isPending,children:[zm.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(uS,{className:"w-4 h-4"}),i("settings.testAll")]}),a.jsxs(De,{size:"sm",onClick:()=>{ue(null),re(!0)},children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.addNotificationProvider")]})]})]}),a.jsx(wt,{className:"mb-4",children:a.jsx(St,{className:"py-3",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm font-medium",children:i("settings.notificationLanguage")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.notificationLanguageDescription")})]}),a.jsx("select",{value:k.notification_language||"en",onChange:_e=>hn("notification_language",_e.target.value),className:"px-2 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm focus:outline-none focus:ring-1 focus:ring-bambu-green",children:CH.map(_e=>a.jsx("option",{value:_e.code,children:_e.nativeName},_e.code))})]})})}),a.jsx(wt,{className:"mb-4",children:a.jsx(St,{className:"py-3",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm font-medium",children:i("settings.bedCooledThreshold")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.bedCooledThresholdDescription")})]}),a.jsxs("div",{className:"flex items-center gap-1",children:[a.jsx("input",{type:"number",min:20,max:80,step:1,value:k.bed_cooled_threshold??35,onChange:_e=>hn("bed_cooled_threshold",Number(_e.target.value)),className:"w-16 px-2 py-1.5 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-sm text-center focus:outline-none focus:ring-1 focus:ring-bambu-green"}),a.jsx("span",{className:"text-sm text-bambu-gray",children:"°C"})]})]})})}),a.jsx(wt,{className:"mb-4",children:a.jsx(St,{className:"py-3",children:a.jsxs("div",{className:`flex items-center justify-between ${ha?.advanced_auth_enabled?"":"opacity-50"}`,children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white text-sm font-medium",children:i("settings.userNotificationsEnabled")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:ha?.advanced_auth_enabled?i("settings.userNotificationsEnabledDescription"):i("settings.userNotificationsDisabledHint")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",className:"sr-only peer",checked:k.user_notifications_enabled??!0,disabled:!ha?.advanced_auth_enabled,onChange:_e=>hn("user_notifications_enabled",_e.target.checked)}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green peer-disabled:cursor-not-allowed"})]})]})})}),ci&&a.jsx(wt,{className:"mb-4",children:a.jsxs(St,{className:"py-3",children:[a.jsxs("div",{className:"flex items-center justify-between mb-2",children:[a.jsx("span",{className:"text-sm font-medium text-white",children:i("settings.testResults")}),a.jsx("button",{onClick:()=>iu(null),className:"text-bambu-gray hover:text-white text-xs",children:i("common.dismiss")})]}),a.jsxs("div",{className:"flex items-center gap-4 text-sm mb-2",children:[a.jsxs("span",{className:"flex items-center gap-1 text-bambu-green",children:[a.jsx(wr,{className:"w-4 h-4"}),i("settings.testPassedCount",{count:ci.success})]}),ci.failed>0&&a.jsxs("span",{className:"flex items-center gap-1 text-red-400",children:[a.jsx(Da,{className:"w-4 h-4"}),i("settings.testFailedCount",{count:ci.failed})]})]}),ci.results.filter(_e=>!_e.success).length>0&&a.jsx("div",{className:"space-y-1 mt-2 pt-2 border-t border-bambu-dark-tertiary",children:ci.results.filter(_e=>!_e.success).map(_e=>a.jsxs("div",{className:"text-xs text-red-400",children:[a.jsxs("span",{className:"font-medium",children:[_e.provider_name,":"]})," ",_e.message]},_e.provider_id))})]})}),gn?a.jsx("div",{className:"flex justify-center py-12",children:a.jsx(mt,{className:"w-6 h-6 text-bambu-green animate-spin"})}):wn&&wn.length>0?a.jsx("div",{className:"space-y-3",children:wn.map(_e=>a.jsx(Xnt,{provider:_e,onEdit:Et=>{ue(Et),re(!0)}},_e.id))}):a.jsx(wt,{children:a.jsx(St,{className:"py-8",children:a.jsxs("div",{className:"text-center text-bambu-gray",children:[a.jsx(ap,{className:"w-12 h-12 mx-auto mb-3 opacity-30"}),a.jsx("p",{className:"text-sm font-medium text-white mb-2",children:i("settings.noProvidersTitle")}),a.jsx("p",{className:"text-xs mb-3",children:i("settings.noProvidersDescription")}),a.jsxs(De,{size:"sm",onClick:()=>{ue(null),re(!0)},children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.addProvider")]})]})})})]}),a.jsxs("div",{children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2 mb-2",id:"card-templates",children:[a.jsx(Ns,{className:"w-5 h-5 text-bambu-green"}),i("settings.messageTemplates")]}),a.jsx("p",{className:"text-sm text-bambu-gray mb-3",children:i("settings.messageTemplatesDescription")}),a.jsxs("div",{className:"relative mb-3",children:[a.jsx(Nr,{className:"w-4 h-4 text-bambu-gray absolute left-3 top-1/2 -translate-y-1/2 pointer-events-none"}),a.jsx("input",{type:"text",value:K,onChange:_e=>ae(_e.target.value),placeholder:i("settings.filterTemplates","Filter templates…"),className:"w-full pl-9 pr-8 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green"}),K&&a.jsx("button",{onClick:()=>ae(""),className:"absolute right-2 top-1/2 -translate-y-1/2 p-1 text-bambu-gray hover:text-white","aria-label":"Clear filter",children:a.jsx(Bt,{className:"w-3.5 h-3.5"})})]}),$n?a.jsx("div",{className:"flex justify-center py-8",children:a.jsx(mt,{className:"w-6 h-6 text-bambu-green animate-spin"})}):Ra&&Ra.length>0?(()=>{const _e=K.trim().toLowerCase(),Et=[...Ra].sort((Fn,kn)=>Fn.name.localeCompare(kn.name)).filter(Fn=>!_e||Fn.name.toLowerCase().includes(_e)||(Fn.title_template||"").toLowerCase().includes(_e));return Et.length===0?a.jsx("p",{className:"text-sm text-bambu-gray italic text-center py-6",children:i("settings.noTemplatesMatch","No templates match your filter.")}):a.jsx("div",{className:"space-y-2",children:Et.map(Fn=>a.jsx(wt,{className:"cursor-pointer hover:border-bambu-green/50 transition-colors",onClick:()=>se(Fn),children:a.jsx(St,{className:"py-2.5 px-3",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"min-w-0 flex-1",children:[a.jsx("p",{className:"text-white font-medium text-sm truncate",children:Fn.name}),a.jsx("p",{className:"text-bambu-gray text-xs truncate mt-0.5",children:Fn.title_template})]}),a.jsx("button",{className:"p-1.5 hover:bg-bambu-dark-tertiary rounded transition-colors shrink-0 ml-2",onClick:kn=>{kn.stopPropagation(),se(Fn)},children:a.jsx(Ju,{className:"w-4 h-4 text-bambu-gray"})})]})})},Fn.id))})})():a.jsx(wt,{children:a.jsx(St,{className:"py-8",children:a.jsxs("div",{className:"text-center text-bambu-gray",children:[a.jsx(Ns,{className:"w-12 h-12 mx-auto mb-3 opacity-30"}),a.jsx("p",{className:"text-sm",children:i("settings.noTemplatesAvailable")})]})})})]})]}),O==="apikeys"&&a.jsxs("div",{className:m("api_keys:read")?"grid grid-cols-1 xl:grid-cols-2 gap-4":"grid grid-cols-1 gap-4",children:[a.jsxs("div",{children:[m("api_keys:read")&&a.jsxs(a.Fragment,{children:[a.jsxs("div",{className:"flex items-start justify-between gap-4 mb-6",children:[a.jsxs("div",{className:"flex-1",children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",id:"card-createapi",children:[a.jsx(ao,{className:"w-5 h-5 text-bambu-green"}),i("settings.apiKeys")]}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:i("settings.apiKeysDescription")})]}),a.jsxs(De,{size:"sm",onClick:()=>te(!0),className:"flex-shrink-0",children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.createKey")]})]}),H&&a.jsx(wt,{className:"mb-6 border-bambu-green",children:a.jsx(St,{className:"py-4",children:a.jsxs("div",{className:"flex items-start gap-3",children:[a.jsx(wr,{className:"w-5 h-5 text-bambu-green flex-shrink-0 mt-0.5"}),a.jsxs("div",{className:"flex-1",children:[a.jsx("p",{className:"text-white font-medium mb-1",children:i("settings.apiKeyCreated")}),a.jsx("p",{className:"text-sm text-bambu-gray mb-2",children:i("settings.apiKeyCopyWarning")}),a.jsxs("div",{className:"flex items-center gap-2 bg-bambu-dark rounded-lg p-2",children:[a.jsx("code",{className:"flex-1 text-sm text-bambu-green font-mono break-all",children:H}),a.jsx(De,{variant:"secondary",size:"sm",onClick:async()=>{try{if(navigator.clipboard&&navigator.clipboard.writeText)await navigator.clipboard.writeText(H);else{const _e=document.createElement("textarea");_e.value=H,_e.style.position="fixed",_e.style.left="-999999px",document.body.appendChild(_e),_e.select(),document.execCommand("copy"),document.body.removeChild(_e)}o(i("settings.toast.keyCopied"))}catch{o(i("settings.toast.copyFailed"),"error")}},children:a.jsx(ns,{className:"w-4 h-4"})})]}),a.jsxs("div",{className:"flex gap-2 mt-3",children:[a.jsx(De,{variant:"secondary",size:"sm",onClick:()=>{je(H),o(i("settings.toast.keyAddedToBrowser"))},children:i("settings.useInApiBrowser")}),a.jsx(De,{variant:"secondary",size:"sm",onClick:()=>L(null),children:i("common.dismiss")})]})]})]})})}),W&&a.jsxs(wt,{className:"mb-6",children:[a.jsx(pn,{children:a.jsx("h3",{className:"text-base font-semibold text-white",children:i("settings.createNewApiKey")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.keyName")}),a.jsx("input",{type:"text",value:le,onChange:_e=>ye(_e.target.value),placeholder:i("settings.keyNamePlaceholder"),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-2",children:i("common.permissions")}),a.jsxs("div",{className:"space-y-2",children:[a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:he.can_read_status,onChange:_e=>me(Et=>({...Et,can_read_status:_e.target.checked})),className:"w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green"}),a.jsxs("div",{children:[a.jsx("span",{className:"text-white",children:i("settings.readStatus")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.readStatusDescription")})]})]}),a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:he.can_queue,onChange:_e=>me(Et=>({...Et,can_queue:_e.target.checked})),className:"w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green"}),a.jsxs("div",{children:[a.jsx("span",{className:"text-white",children:i("settings.manageQueue")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.manageQueueDescription")})]})]}),a.jsxs("label",{className:"flex items-center gap-3 cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:he.can_control_printer,onChange:_e=>me(Et=>({...Et,can_control_printer:_e.target.checked})),className:"w-4 h-4 text-bambu-green rounded border-bambu-dark-tertiary bg-bambu-dark focus:ring-bambu-green"}),a.jsxs("div",{children:[a.jsx("span",{className:"text-white",children:i("settings.controlPrinter")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.controlPrinterDescription")})]})]})]})]}),a.jsxs("div",{className:"flex items-center gap-2 pt-2",children:[a.jsxs(De,{onClick:()=>br.mutate({name:le||i("settings.unnamedKey"),...he}),disabled:br.isPending,children:[br.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(nr,{className:"w-4 h-4"}),i("settings.createKey")]}),a.jsx(De,{variant:"secondary",onClick:()=>te(!1),children:i("common.cancel")})]})]})]}),xn?a.jsx("div",{className:"flex justify-center py-12",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})}):_n&&_n.length>0?a.jsx("div",{className:"space-y-3",children:_n.map(_e=>a.jsx(wt,{children:a.jsx(St,{className:"py-3",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsx(ao,{className:`w-5 h-5 ${_e.enabled?"text-bambu-green":"text-bambu-gray"}`}),a.jsxs("div",{children:[a.jsx("p",{className:"text-white font-medium",children:_e.name}),a.jsxs("p",{className:"text-xs text-bambu-gray",children:[_e.key_prefix,"••••••••",_e.last_used&&` · ${i("settings.lastUsed")}: ${yg(_e.last_used)}`]})]})]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsxs("div",{className:"flex gap-1 text-xs",children:[_e.can_read_status&&a.jsx("span",{className:"px-1.5 py-0.5 bg-blue-500/20 text-blue-400 rounded",children:i("settings.read")}),_e.can_queue&&a.jsx("span",{className:"px-1.5 py-0.5 bg-green-500/20 text-green-400 rounded",children:i("queue.title")}),_e.can_control_printer&&a.jsx("span",{className:"px-1.5 py-0.5 bg-orange-500/20 text-orange-400 rounded",children:i("settings.control")})]}),a.jsx(De,{variant:"secondary",size:"sm",onClick:()=>ge(_e.id),children:a.jsx(Zt,{className:"w-4 h-4 text-red-400"})})]})]})})},_e.id))}):a.jsx(wt,{children:a.jsx(St,{className:"py-12",children:a.jsxs("div",{className:"text-center text-bambu-gray",children:[a.jsx(ao,{className:"w-16 h-16 mx-auto mb-4 opacity-30"}),a.jsx("p",{className:"text-lg font-medium text-white mb-2",children:i("settings.apiKeysEmptyTitle")}),a.jsx("p",{className:"text-sm mb-4",children:i("settings.apiKeysEmptyDescription")}),a.jsxs(De,{onClick:()=>te(!0),children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.createFirstKey")]})]})})}),a.jsxs(wt,{className:"mt-6",children:[a.jsx(pn,{children:a.jsx("h3",{className:"text-base font-semibold text-white",id:"card-webhooks",children:i("settings.webhookEndpoints")})}),a.jsxs(St,{className:"space-y-3 text-sm",children:[a.jsx("p",{className:"text-bambu-gray",children:i("settings.webhookApiKeyHint")}),a.jsxs("div",{className:"space-y-2 font-mono text-xs",children:[a.jsxs("div",{className:"p-2 bg-bambu-dark rounded",children:[a.jsx("span",{className:"text-blue-400",children:"GET"})," ",a.jsx("span",{className:"text-white",children:"/api/v1/webhook/status"}),a.jsxs("span",{className:"text-bambu-gray",children:[" - ",i("settings.webhook.getAllStatus")]})]}),a.jsxs("div",{className:"p-2 bg-bambu-dark rounded",children:[a.jsx("span",{className:"text-blue-400",children:"GET"})," ",a.jsx("span",{className:"text-white",children:"/api/v1/webhook/status/:id"}),a.jsxs("span",{className:"text-bambu-gray",children:[" - ",i("settings.webhook.getSpecificStatus")]})]}),a.jsxs("div",{className:"p-2 bg-bambu-dark rounded",children:[a.jsx("span",{className:"text-green-400",children:"POST"})," ",a.jsx("span",{className:"text-white",children:"/api/v1/webhook/queue"}),a.jsxs("span",{className:"text-bambu-gray",children:[" - ",i("settings.webhook.addToQueue")]})]}),a.jsxs("div",{className:"p-2 bg-bambu-dark rounded",children:[a.jsx("span",{className:"text-orange-400",children:"POST"})," ",a.jsx("span",{className:"text-white",children:"/api/v1/webhook/printer/:id/pause"}),a.jsxs("span",{className:"text-bambu-gray",children:[" - ",i("settings.webhook.pausePrint")]})]}),a.jsxs("div",{className:"p-2 bg-bambu-dark rounded",children:[a.jsx("span",{className:"text-orange-400",children:"POST"})," ",a.jsx("span",{className:"text-white",children:"/api/v1/webhook/printer/:id/resume"}),a.jsxs("span",{className:"text-bambu-gray",children:[" - ",i("settings.webhook.resumePrint")]})]}),a.jsxs("div",{className:"p-2 bg-bambu-dark rounded",children:[a.jsx("span",{className:"text-red-400",children:"POST"})," ",a.jsx("span",{className:"text-white",children:"/api/v1/webhook/printer/:id/stop"}),a.jsxs("span",{className:"text-bambu-gray",children:[" - ",i("settings.webhook.stopPrint")]})]})]})]})]})]}),a.jsxs(wt,{className:"mt-6",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",id:"card-camera-tokens",children:[a.jsx(FN,{className:"w-4 h-4 text-bambu-green"}),i("cameraTokens.title","Camera API Tokens")]})}),a.jsx(St,{children:a.jsx(Gnt,{})})]})]}),m("api_keys:read")&&a.jsxs("div",{children:[a.jsxs("div",{className:"mb-6",children:[a.jsxs("h2",{className:"text-lg font-semibold text-white flex items-center gap-2",id:"card-apibrowser",children:[a.jsx(qs,{className:"w-5 h-5 text-bambu-green"}),i("settings.apiBrowser")]}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:i("settings.apiBrowserDescription")})]}),a.jsx(wt,{className:"mb-4",children:a.jsxs(St,{className:"py-3",children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-2",children:i("settings.apiKeyForTesting")}),a.jsx("input",{type:"text",value:ke,onChange:_e=>je(_e.target.value),placeholder:i("settings.apiKeyPlaceholder"),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white font-mono text-sm focus:border-bambu-green focus:outline-none"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-2",children:i("settings.apiKeyHint")})]})}),a.jsx(Prt,{apiKey:ke})]})]}),O==="virtual-printer"&&a.jsx("div",{id:"card-vp",children:a.jsx(drt,{})}),O==="spoolbuddy"&&a.jsx("div",{id:"card-spoolbuddy",children:a.jsx(mrt,{})}),O==="queue"&&k&&a.jsxs("div",{className:"flex flex-col lg:flex-row gap-4 lg:gap-6",children:[a.jsxs("div",{className:"lg:w-1/2 space-y-3",children:[a.jsxs(wt,{id:"card-print-options",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",children:[a.jsx(jN,{className:"w-4 h-4 text-bambu-green"}),i("settings.defaultPrintOptions","Default Print Options")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.defaultPrintOptionsDescription","Set default values for print options when starting new prints. These can be overridden per print in the print dialog.")}),[{key:"default_bed_levelling",label:i("settings.defaultBedLevelling","Bed Levelling"),desc:i("settings.defaultBedLevellingDesc","Auto-level bed before print"),fallback:!0},{key:"default_flow_cali",label:i("settings.defaultFlowCali","Flow Calibration"),desc:i("settings.defaultFlowCaliDesc","Calibrate extrusion flow"),fallback:!1},{key:"default_vibration_cali",label:i("settings.defaultVibrationCali","Vibration Calibration"),desc:i("settings.defaultVibrationCaliDesc","Reduce ringing artifacts"),fallback:!0},{key:"default_layer_inspect",label:i("settings.defaultLayerInspect","First Layer Inspection"),desc:i("settings.defaultLayerInspectDesc","AI inspection of first layer"),fallback:!1},{key:"default_timelapse",label:i("settings.defaultTimelapse","Timelapse"),desc:i("settings.defaultTimelapseDesc","Record timelapse video"),fallback:!1}].map(({key:_e,label:Et,desc:Fn,fallback:kn})=>a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex-1 mr-4",children:[a.jsx("p",{className:"text-sm text-white",children:Et}),a.jsx("p",{className:"text-xs text-bambu-gray mt-0.5",children:Fn})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k[_e]??kn,onChange:it=>hn(_e,it.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]},_e))]})]}),a.jsxs(wt,{id:"card-staggered",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",children:[a.jsx(ia,{className:"w-4 h-4 text-bambu-green"}),i("settings.staggeredStart","Staggered Start")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.staggeredStartDescription","Default group size and interval when staggering multi-printer batch starts. Can be overridden per batch in the print modal.")}),a.jsxs("div",{className:"flex gap-4",children:[a.jsxs("div",{className:"flex-1",children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.staggerGroupSize","Group size")}),a.jsx("input",{type:"number",min:1,max:50,value:k.stagger_group_size??2,onChange:_e=>hn("stagger_group_size",Math.max(1,Math.min(50,parseInt(_e.target.value)||1))),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.staggerGroupSizeHelp","Printers to start simultaneously per group")})]}),a.jsxs("div",{className:"flex-1",children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.staggerInterval","Interval (minutes)")}),a.jsx("input",{type:"number",min:1,max:60,value:k.stagger_interval_minutes??5,onChange:_e=>hn("stagger_interval_minutes",Math.max(1,Math.min(60,parseInt(_e.target.value)||1))),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-sm focus:outline-none focus:border-bambu-green"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.staggerIntervalHelp","Delay between each group starting")})]})]})]})]}),a.jsxs(wt,{id:"card-plate",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",children:[a.jsx(Wu,{className:"w-4 h-4 text-bambu-green"}),i("settings.plateClear","Plate-Clear Confirmation")]})}),a.jsx(St,{className:"space-y-3",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex-1 mr-4",children:[a.jsx("p",{className:"text-sm text-white",children:i("settings.requirePlateClear","Require plate-clear confirmation")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.requirePlateClearDescription",'When enabled, the scheduler waits for per-printer plate-clear confirmation before starting queued prints on printers with finished jobs. Disabling this also hides the plate status badge and the "Mark plate as cleared" button on printer cards.')})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.require_plate_clear??!1,onChange:_e=>hn("require_plate_clear",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]})})]}),a.jsxs(wt,{id:"card-gcode",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",children:[a.jsx(Py,{className:"w-4 h-4 text-bambu-green"}),i("settings.gcodeInjection","G-code Injection")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.gcodeInjectionDescription",'Configure custom G-code to inject at the start and/or end of prints for auto-print systems like Farmloop, SwapMod, AutoClear, and Printflow 3D. Snippets are configured per printer model and applied when "Inject G-code" is enabled on a queue item.')}),(()=>{const _e=(()=>{try{return k.gcode_snippets?JSON.parse(k.gcode_snippets):{}}catch{return{}}})(),Et=[...new Set((On||[]).filter(it=>it.model).map(it=>it.model))].sort(),Fn=(it,Dt,Xt)=>{const ct={..._e};ct[it]||(ct[it]={start_gcode:"",end_gcode:""}),ct[it][Dt]=Xt,!ct[it].start_gcode&&!ct[it].end_gcode&&delete ct[it];const Mn=Object.keys(ct).length>0?JSON.stringify(ct):"";E(xr=>xr?{...xr,gcode_snippets:Mn}:null),kl.current=Mn},kn=()=>{kl.current!==null&&(Um.mutate({gcode_snippets:kl.current}),kl.current=null)};return Et.length===0?a.jsx("p",{className:"text-sm text-bambu-gray italic",children:i("settings.gcodeInjectionNoPrinters","No printers found. Add printers to configure G-code snippets.")}):Et.map(it=>{const Dt=_e[it]||{start_gcode:"",end_gcode:""},Xt=!!(Dt.start_gcode||Dt.end_gcode);return a.jsx(Uz,{defaultOpen:Xt,className:"border border-bambu-dark-tertiary rounded-lg px-3 py-2",summary:a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("h4",{className:"text-sm font-medium text-white",children:it}),Xt&&a.jsx("span",{className:"text-xs px-1.5 py-0.5 rounded bg-bambu-green/20 text-bambu-green",children:i("settings.gcodeConfigured","Configured")})]}),children:a.jsxs("div",{className:"space-y-2",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.gcodeStartLabel","Start G-code")}),a.jsx("textarea",{value:Dt.start_gcode,onChange:ct=>Fn(it,"start_gcode",ct.target.value),onBlur:kn,placeholder:i("settings.gcodeStartPlaceholder","G-code prepended before the print starts..."),rows:3,className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-xs font-mono focus:outline-none focus:border-bambu-green resize-y"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-xs text-bambu-gray mb-1",children:i("settings.gcodeEndLabel","End G-code")}),a.jsx("textarea",{value:Dt.end_gcode,onChange:ct=>Fn(it,"end_gcode",ct.target.value),onBlur:kn,placeholder:i("settings.gcodeEndPlaceholder","G-code appended after the print ends..."),rows:3,className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-xs font-mono focus:outline-none focus:border-bambu-green resize-y"})]})]})},it)})})()]})]})]}),a.jsxs("div",{className:"lg:w-1/2 space-y-3",children:[a.jsxs(wt,{id:"card-slicer",children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",children:[a.jsx(Ud,{className:"w-4 h-4 text-bambu-green"}),i("settings.slicerCard","Slicer")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.preferredSlicer")}),a.jsxs("div",{className:"relative",children:[a.jsxs("select",{value:k.preferred_slicer??"bambu_studio",onChange:_e=>hn("preferred_slicer",_e.target.value),className:"w-full px-3 py-2 pr-10 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none appearance-none cursor-pointer",children:[a.jsx("option",{value:"bambu_studio",children:i("settings.slicerBambuStudio")}),a.jsx("option",{value:"orcaslicer",children:i("settings.slicerOrcaSlicer")})]}),a.jsx(zn,{className:"absolute right-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray pointer-events-none"})]}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.preferredSlicerDescription")}),(k.preferred_slicer??"bambu_studio")==="orcaslicer"&&a.jsx("div",{role:"alert",className:"text-xs text-amber-200 bg-amber-900/20 border border-amber-700/40 rounded p-2 mt-2",children:i("settings.orcaslicerKnownIssuesWarning","OrcaSlicer 2.3.2 / 2.4.0-dev have known CLI bugs that block slicing many Bambu-authored 3MFs — see upstream issues #12426 (segfault on painted multi-extruder files) and #13386 (parameter-range strict-validation reject). Bambu Studio is recommended until the upstream fixes land.")})]}),a.jsxs("div",{className:"flex items-center justify-between gap-3",children:[a.jsxs("div",{className:"min-w-0",children:[a.jsx("p",{className:"text-white",children:i("settings.useSlicerApi")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.useSlicerApiDescription")})]}),a.jsxs("label",{className:"flex items-center cursor-pointer shrink-0",children:[a.jsx("input",{type:"checkbox",checked:k.use_slicer_api??!1,onChange:_e=>hn("use_slicer_api",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"relative w-11 h-6 bg-bambu-dark-tertiary rounded-full peer peer-checked:bg-bambu-green peer-focus:outline-none peer-focus:ring-2 peer-focus:ring-bambu-green/50 transition-colors after:content-[''] after:absolute after:top-0.5 after:left-0.5 after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-transform peer-checked:after:translate-x-5"})]})]}),(k.use_slicer_api??!1)&&a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:(k.preferred_slicer??"bambu_studio")==="orcaslicer"?i("settings.orcaslicerApiUrl","OrcaSlicer sidecar URL"):i("settings.bambuStudioApiUrl","Bambu Studio sidecar URL")}),a.jsx("input",{type:"text",value:((k.preferred_slicer??"bambu_studio")==="orcaslicer"?k.orcaslicer_api_url:k.bambu_studio_api_url)??"",onChange:_e=>hn((k.preferred_slicer??"bambu_studio")==="orcaslicer"?"orcaslicer_api_url":"bambu_studio_api_url",_e.target.value),placeholder:(k.preferred_slicer??"bambu_studio")==="orcaslicer"?"http://localhost:3003":"http://localhost:3001",className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none placeholder:text-bambu-gray/40"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:i("settings.slicerApiUrlDescription","URL of the slicer-API sidecar container. Leave blank to use the SLICER_API_URL / BAMBU_STUDIO_API_URL env var defaults.")})]})]})]}),a.jsxs(wt,{children:[a.jsx(pn,{children:a.jsxs("h3",{className:"text-base font-semibold text-white flex items-center gap-2",id:"card-drying",children:[a.jsx(qu,{className:"w-4 h-4 text-amber-400"}),i("settings.queueDrying")]})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.queueDryingDescription")}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-white",children:i("settings.queueDryingEnabled")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-0.5",children:i("settings.queueDryingEnabledDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.queue_drying_enabled??!1,onChange:_e=>hn("queue_drying_enabled",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),k.queue_drying_enabled&&a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-white",children:i("settings.queueDryingBlock")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-0.5",children:i("settings.queueDryingBlockDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.queue_drying_block??!1,onChange:_e=>hn("queue_drying_block",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-amber-500"})]})]}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-white",children:i("settings.ambientDryingEnabled")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-0.5",children:i("settings.ambientDryingEnabledDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.ambient_drying_enabled??!1,onChange:_e=>hn("ambient_drying_enabled",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{className:"space-y-2",children:[a.jsx("p",{className:"text-sm text-white font-medium",children:i("settings.dryingPresets")}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.dryingPresetsDescription")}),a.jsx("div",{className:"overflow-x-auto",children:a.jsxs("table",{className:"w-full text-xs",children:[a.jsx("thead",{children:a.jsxs("tr",{className:"text-bambu-gray border-b border-bambu-dark-tertiary",children:[a.jsx("th",{className:"text-left py-1.5",children:i("settings.dryingFilament")}),a.jsx("th",{className:"text-center py-1.5",colSpan:2,children:"AMS 2 Pro"}),a.jsx("th",{className:"text-center py-1.5",colSpan:2,children:"AMS-HT"})]})}),a.jsx("tbody",{children:(()=>{const _e={PLA:{n3f:45,n3s:45,n3f_hours:12,n3s_hours:12},PETG:{n3f:65,n3s:65,n3f_hours:12,n3s_hours:12},TPU:{n3f:65,n3s:75,n3f_hours:12,n3s_hours:18},ABS:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},ASA:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:12},PC:{n3f:65,n3s:80,n3f_hours:12,n3s_hours:8},PVA:{n3f:65,n3s:85,n3f_hours:12,n3s_hours:18}};let Et={..._e};try{if(k.drying_presets){const kn=JSON.parse(k.drying_presets);typeof kn=="object"&&kn!==null&&(Et={..._e,...kn})}}catch{}const Fn=(kn,it,Dt)=>{const Xt={...Et,[kn]:{...Et[kn],[it]:Dt}};hn("drying_presets",JSON.stringify(Xt))};return Object.entries(Et).map(([kn,it])=>a.jsxs("tr",{className:"border-b border-bambu-dark-tertiary/50",children:[a.jsx("td",{className:"py-1.5 pr-2 text-white font-medium",children:kn}),a.jsx("td",{className:"py-1 px-1",children:a.jsxs("div",{className:"flex items-center justify-end gap-1",children:[a.jsx("input",{type:"number",min:30,max:65,value:it.n3f,onChange:Dt=>Fn(kn,"n3f",Math.max(1,parseInt(Dt.target.value)||0)),className:"w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none"}),a.jsx("span",{className:"text-bambu-gray",children:"°C"})]})}),a.jsx("td",{className:"py-1 px-1",children:a.jsxs("div",{className:"flex items-center gap-1",children:[a.jsx("input",{type:"number",min:1,max:24,value:it.n3f_hours,onChange:Dt=>Fn(kn,"n3f_hours",Math.max(1,parseInt(Dt.target.value)||0)),className:"w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none"}),a.jsx("span",{className:"text-bambu-gray",children:"h"})]})}),a.jsx("td",{className:"py-1 px-1",children:a.jsxs("div",{className:"flex items-center justify-end gap-1",children:[a.jsx("input",{type:"number",min:30,max:85,value:it.n3s,onChange:Dt=>Fn(kn,"n3s",Math.max(1,parseInt(Dt.target.value)||0)),className:"w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none"}),a.jsx("span",{className:"text-bambu-gray",children:"°C"})]})}),a.jsx("td",{className:"py-1 px-1",children:a.jsxs("div",{className:"flex items-center gap-1",children:[a.jsx("input",{type:"number",min:1,max:24,value:it.n3s_hours,onChange:Dt=>Fn(kn,"n3s_hours",Math.max(1,parseInt(Dt.target.value)||0)),className:"w-14 px-1.5 py-1 bg-bambu-dark border border-bambu-dark-tertiary rounded text-white text-center text-xs focus:border-amber-500/50 focus:outline-none [appearance:textfield] [&::-webkit-outer-spin-button]:appearance-none [&::-webkit-inner-spin-button]:appearance-none"}),a.jsx("span",{className:"text-bambu-gray",children:"h"})]})})]},kn))})()})]})})]})]})]})]})]}),O==="filament"&&k&&a.jsx(a.Fragment,{children:a.jsxs("div",{className:"flex flex-col lg:flex-row gap-4 lg:gap-6",children:[a.jsxs("div",{className:"lg:w-1/3 space-y-3",children:[a.jsx(rrt,{}),a.jsxs(wt,{id:"card-filamentchecks",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.filamentChecks")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.disableFilamentWarnings")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.disableFilamentWarningsDesc")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.disable_filament_warnings,onChange:_e=>hn("disable_filament_warnings",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]}),a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.preferLowestFilament")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.preferLowestFilamentDesc")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.prefer_lowest_filament,onChange:_e=>hn("prefer_lowest_filament",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]})]})]}),a.jsxs(wt,{id:"card-printmodal",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.printModal")})}),a.jsx(St,{className:"space-y-3",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{children:[a.jsx("p",{className:"text-white",children:i("settings.expandCustomMapping")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.expandCustomMappingDescription")})]}),a.jsxs("label",{className:"relative inline-flex items-center cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:k.per_printer_mapping_expanded??!1,onChange:_e=>hn("per_printer_mapping_expanded",_e.target.checked),className:"sr-only peer"}),a.jsx("div",{className:"w-11 h-6 bg-bambu-dark-tertiary peer-focus:outline-none rounded-full peer peer-checked:after:translate-x-full peer-checked:after:border-white after:content-[''] after:absolute after:top-[2px] after:left-[2px] after:bg-white after:rounded-full after:h-5 after:w-5 after:transition-all peer-checked:bg-bambu-green"})]})]})})]}),a.jsxs(wt,{id:"card-amsthresholds",children:[a.jsx(pn,{children:a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.amsDisplayThresholds")})}),a.jsxs(St,{className:"space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.amsThresholdsDescription")}),a.jsxs("div",{className:"space-y-3",children:[a.jsxs("div",{className:"flex items-center gap-2 text-white",children:[a.jsx(QI,{className:"w-4 h-4 text-blue-400"}),a.jsx("span",{className:"font-medium",children:i("settings.humidity")})]}),a.jsxs("div",{className:"grid grid-cols-2 gap-3",children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[i("settings.goodGreen")," ≤"]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",min:"0",max:"100",value:k.ams_humidity_good??40,onChange:_e=>hn("ams_humidity_good",parseInt(_e.target.value)||40),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("span",{className:"text-bambu-gray",children:"%"})]})]}),a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[i("settings.fairOrange")," ≤"]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",min:"0",max:"100",value:k.ams_humidity_fair??60,onChange:_e=>hn("ams_humidity_fair",parseInt(_e.target.value)||60),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("span",{className:"text-bambu-gray",children:"%"})]})]})]}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.aboveFairBad")}),a.jsx("p",{className:"text-xs text-amber-400/70",children:i("settings.fairAlsoDryingThreshold")})]}),a.jsxs("div",{className:"space-y-3 pt-2 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{className:"flex items-center gap-2 text-white",children:[a.jsx(hS,{className:"w-4 h-4 text-orange-400"}),a.jsx("span",{className:"font-medium",children:i("settings.temperature")})]}),a.jsxs("div",{className:"grid grid-cols-2 gap-3",children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[i("settings.goodBlue")," ≤"]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",step:"0.5",min:"0",max:"60",value:k.ams_temp_good??28,onChange:_e=>hn("ams_temp_good",parseFloat(_e.target.value)||28),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("span",{className:"text-bambu-gray",children:"°C"})]})]}),a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm text-bambu-gray mb-1",children:[i("settings.fairOrange")," ≤"]}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",step:"0.5",min:"0",max:"60",value:k.ams_temp_fair??35,onChange:_e=>hn("ams_temp_fair",parseFloat(_e.target.value)||35),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("span",{className:"text-bambu-gray",children:"°C"})]})]})]}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.aboveFairHot")})]}),a.jsxs("div",{className:"space-y-3 pt-4 border-t border-bambu-dark-tertiary",children:[a.jsxs("div",{className:"flex items-center gap-2 text-white",children:[a.jsx(Jl,{className:"w-4 h-4 text-purple-400"}),a.jsx("span",{className:"font-medium",children:i("settings.historyRetention")})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:i("settings.keepSensorHistory")}),a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("input",{type:"number",min:"1",max:"365",value:k.ams_history_retention_days??30,onChange:_e=>hn("ams_history_retention_days",parseInt(_e.target.value)||30),className:"w-24 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none"}),a.jsx("span",{className:"text-bambu-gray",children:i("common.days")})]})]}),a.jsx("p",{className:"text-xs text-bambu-gray",children:i("settings.historyRetentionDescription")})]})]})]})]}),a.jsxs("div",{className:"lg:w-2/3 space-y-3",children:[a.jsx(art,{}),a.jsx(irt,{})]})]})}),ee!==null&&a.jsx(yn,{title:i("settings.deleteApiKeyTitle"),message:i("settings.deleteApiKeyMessage"),confirmText:i("settings.deleteKey"),variant:"danger",onConfirm:()=>{Tr.mutate(ee),ge(null)},onCancel:()=>ge(null)}),$&&a.jsx(Knt,{plug:X,onClose:()=>{z(!1),R(null)}}),ne&&a.jsx(Qnt,{provider:J,onClose:()=>{re(!1),ue(null)}}),ie&&a.jsx(Jnt,{template:ie,onClose:()=>se(null)}),fe&&a.jsx(ert,{onClose:()=>B(!1)}),Te&&a.jsx(yn,{title:i("settings.clearNotificationLogs"),message:i("settings.clearLogsMessage"),confirmText:i("settings.clearLogs"),variant:"warning",onConfirm:async()=>{xe(!1);try{const _e=await oe.clearNotificationLogs(30);o(_e.message,"success")}catch{o(i("settings.toast.clearLogsFailed"),"error")}},onCancel:()=>xe(!1)}),Fe&&a.jsx(yn,{title:i("settings.resetUiPreferences"),message:i("settings.resetUiPreferencesMessage"),confirmText:i("settings.resetPreferences"),variant:"default",onConfirm:()=>{Be(!1),localStorage.clear(),o(i("settings.toast.uiPreferencesReset"),"success"),setTimeout(()=>window.location.reload(),1e3)},onCancel:()=>Be(!1)}),Ce&&a.jsx(yn,{title:`Turn All Plugs ${Ce==="on"?"On":"Off"}`,message:`This will turn ${Ce==="on"?"ON":"OFF"} all ${Ke?.filter(_e=>_e.enabled).length||0} enabled smart plugs. ${Ce==="off"?"Any running printers may be affected!":""}`,confirmText:`Turn All ${Ce==="on"?"On":"Off"}`,variant:Ce==="off"?"danger":"warning",onConfirm:()=>{const _e=Ce;ze(null),Ys.mutate(_e)},onCancel:()=>ze(null)}),Me&&Lr?.release_notes&&a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4",onClick:()=>Oe(!1),children:a.jsxs(wt,{className:"w-full max-w-2xl max-h-[80vh] flex flex-col",onClick:_e=>_e.stopPropagation(),children:[a.jsxs(pn,{className:"flex flex-row items-center justify-between shrink-0",children:[a.jsxs("div",{children:[a.jsxs("h2",{className:"text-lg font-semibold text-white",children:["Release Notes - v",Lr.latest_version]}),Lr.release_name&&Lr.release_name!==Lr.latest_version&&a.jsx("p",{className:"text-sm text-bambu-gray",children:Lr.release_name})]}),a.jsx("button",{onClick:()=>Oe(!1),className:"p-1 rounded hover:bg-bambu-dark-tertiary text-bambu-gray hover:text-white",children:a.jsx(Bt,{className:"w-5 h-5"})})]}),a.jsx(St,{className:"overflow-y-auto flex-1",children:a.jsx("pre",{className:"text-sm text-bambu-gray whitespace-pre-wrap font-sans",children:Lr.release_notes})}),a.jsxs("div",{className:"p-4 border-t border-bambu-dark-tertiary shrink-0 flex gap-2",children:[Lr.release_url&&a.jsx("a",{href:Lr.release_url,target:"_blank",rel:"noopener noreferrer",className:"flex-1",children:a.jsxs(De,{variant:"secondary",className:"w-full",children:[a.jsx(Ar,{className:"w-4 h-4"}),"View on GitHub"]})}),a.jsx(De,{onClick:()=>Oe(!1),className:"flex-1",children:"Close"})]})]})}),O==="users"&&a.jsxs("div",{className:"space-y-3",children:[a.jsxs("div",{className:"flex gap-1 border-b border-bambu-dark-tertiary",children:[a.jsxs("button",{onClick:()=>G("users"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${I==="users"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(Ku,{className:"w-4 h-4"}),i("settings.tabs.users")]}),a.jsxs("button",{onClick:()=>G("email"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${I==="email"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(xm,{className:"w-4 h-4"}),i("settings.tabs.emailAuth")||"Email Authentication",ha?.advanced_auth_enabled&&a.jsx("span",{className:"w-2 h-2 rounded-full bg-green-400"})]}),a.jsxs("button",{onClick:()=>G("ldap"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px lg:border-b-0 lg:border-l-2 lg:-ml-px lg:mb-0 lg:justify-start flex items-center gap-2 ${I==="ldap"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(Wu,{className:"w-4 h-4"}),i("settings.tabs.ldap")||"LDAP",vc?.ldap_enabled&&a.jsx("span",{className:"w-2 h-2 rounded-full bg-green-400"})]}),a.jsxs("button",{onClick:()=>G("twofa"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${I==="twofa"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(Wu,{className:"w-4 h-4"}),i("settings.tabs.twoFa"),a.jsx("span",{className:`w-2 h-2 rounded-full ${Im?.totp_enabled||Im?.email_otp_enabled?"bg-green-400":"bg-bambu-gray/40"}`})]}),d&&a.jsxs("button",{onClick:()=>G("oidc"),className:`px-4 py-2 text-sm font-medium transition-colors border-b-2 -mb-px flex items-center gap-2 ${I==="oidc"?"text-bambu-green border-bambu-green":"text-bambu-gray hover:text-gray-900 dark:hover:text-white border-transparent"}`,children:[a.jsx(qs,{className:"w-4 h-4"}),i("settings.tabs.oidc"),a.jsx("span",{className:`w-2 h-2 rounded-full ${ru.some(_e=>_e.is_enabled)?"bg-green-400":"bg-bambu-gray/40"}`})]})]}),I==="users"&&a.jsxs(a.Fragment,{children:[a.jsx(wt,{children:a.jsx(St,{className:"py-4",children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-3",children:[a.jsx("div",{className:`w-10 h-10 rounded-full flex items-center justify-center ${l?"bg-green-500/20":"bg-gray-500/20"}`,children:l?a.jsx(Nd,{className:"w-5 h-5 text-green-400"}):a.jsx(D0,{className:"w-5 h-5 text-gray-400"})}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-white font-medium",children:i("settings.authentication")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:i(l?"settings.authEnabledDescription":"settings.authDisabledDescription")})]})]}),l?c?.is_admin&&a.jsxs(De,{variant:"secondary",onClick:()=>et(!0),children:[a.jsx(D0,{className:"w-4 h-4"}),i("common.disable")]}):a.jsxs(De,{onClick:()=>e("/setup"),children:[a.jsx(Nd,{className:"w-4 h-4"}),i("common.enable")]})]})})}),ha?.advanced_auth_enabled&&a.jsx(wt,{className:"border-blue-500/30 bg-blue-500/5",children:a.jsx(St,{className:"py-4",children:a.jsxs("div",{className:"flex items-start gap-3",children:[a.jsx("div",{className:"w-10 h-10 rounded-full flex items-center justify-center bg-blue-500/20 flex-shrink-0",children:a.jsx(xm,{className:"w-5 h-5 text-blue-400"})}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-white font-medium",children:i("settings.email.advancedAuthEnabled")}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:i("settings.email.advancedAuthEnabledDesc")})]})]})})}),l&&a.jsxs("div",{className:"grid grid-cols-1 xl:grid-cols-2 gap-6",children:[a.jsxs("div",{className:"space-y-3",children:[c&&a.jsxs(wt,{children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("h3",{className:"text-lg font-semibold text-white flex items-center gap-2",id:"card-currentuser",children:[a.jsx(Ku,{className:"w-5 h-5 text-bambu-green"}),i("settings.currentUser")]}),c.auth_source!=="ldap"&&a.jsxs(De,{size:"sm",variant:"ghost",onClick:()=>Xe(!0),children:[a.jsx(ao,{className:"w-4 h-4"}),i("settings.changePassword")]})]})}),a.jsx(St,{children:a.jsx("div",{className:"flex items-center justify-between",children:a.jsxs("div",{children:[a.jsx("p",{className:"text-white font-medium text-lg",children:c.username}),a.jsxs("div",{className:"flex flex-wrap gap-1 mt-2",children:[c.is_admin&&a.jsx("span",{className:"px-2 py-0.5 rounded-full text-xs font-medium bg-purple-500/20 text-purple-300",children:i("settings.admin")}),c.groups?.map(_e=>a.jsx("span",{className:`px-2 py-0.5 rounded-full text-xs font-medium ${_e.name==="Administrators"?"bg-purple-500/20 text-purple-300":_e.name==="Operators"?"bg-blue-500/20 text-blue-300":_e.name==="Viewers"?"bg-green-500/20 text-green-300":"bg-gray-500/20 text-gray-300"}`,children:_e.name},_e.id))]})]})})})]}),a.jsxs(wt,{children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("h3",{className:"text-lg font-semibold text-white flex items-center gap-2",id:"card-users",children:[a.jsx(Ku,{className:"w-5 h-5 text-bambu-green"}),i("settings.users")]}),m("users:create")&&a.jsxs(De,{size:"sm",onClick:()=>{He(!0),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.addUser")]})]})}),a.jsx(St,{children:Vp?a.jsx("div",{className:"flex items-center justify-center py-8",children:a.jsx(mt,{className:"w-6 h-6 text-bambu-green animate-spin"})}):rd.length===0?a.jsx("p",{className:"text-center text-bambu-gray py-8",children:i("settings.noUsersFound")}):a.jsx("div",{className:"divide-y divide-bambu-dark-tertiary",children:rd.map(_e=>a.jsxs("div",{className:"py-3 flex items-center justify-between",children:[a.jsxs("div",{className:"flex-1 min-w-0",children:[a.jsx("p",{className:"text-white font-medium truncate",children:_e.username}),a.jsxs("div",{className:"flex flex-wrap gap-1 mt-1",children:[_e.auth_source==="ldap"&&a.jsx("span",{className:"px-2 py-0.5 rounded-full text-xs font-medium bg-cyan-500/20 text-cyan-300",children:"LDAP"}),_e.is_admin&&a.jsx("span",{className:"px-2 py-0.5 rounded-full text-xs font-medium bg-purple-500/20 text-purple-300",children:i("settings.admin")}),_e.groups?.map(Et=>a.jsx("span",{className:`px-2 py-0.5 rounded-full text-xs font-medium ${Et.name==="Administrators"?"bg-purple-500/20 text-purple-300":Et.name==="Operators"?"bg-blue-500/20 text-blue-300":Et.name==="Viewers"?"bg-green-500/20 text-green-300":"bg-gray-500/20 text-gray-300"}`,children:Et.name},Et.id))]})]}),a.jsxs("div",{className:"flex items-center gap-1 ml-4",children:[m("users:update")&&a.jsx(De,{size:"sm",variant:"ghost",onClick:()=>sd(_e),children:a.jsx(Ju,{className:"w-4 h-4"})}),m("users:delete")&&_e.id!==c?.id&&a.jsx(De,{size:"sm",variant:"ghost",onClick:()=>Gp(_e.id),children:a.jsx(Zt,{className:"w-4 h-4"})})]})]},_e.id))})})]})]}),a.jsx("div",{children:a.jsxs(wt,{children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("h3",{className:"text-lg font-semibold text-white flex items-center gap-2",id:"card-groups",children:[a.jsx(Wu,{className:"w-5 h-5 text-bambu-green"}),i("settings.groups")]}),m("groups:create")&&a.jsxs(De,{size:"sm",onClick:()=>e("/groups/new"),children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.addGroup")]})]})}),a.jsx(St,{children:Es?a.jsx("div",{className:"flex items-center justify-center py-8",children:a.jsx(mt,{className:"w-6 h-6 text-bambu-green animate-spin"})}):ka.length===0?a.jsx("p",{className:"text-center text-bambu-gray py-8",children:i("settings.noGroupsFound")}):a.jsx("div",{className:"divide-y divide-bambu-dark-tertiary",children:ka.map(_e=>a.jsxs("div",{className:"py-3",children:[a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(Wu,{className:`w-4 h-4 ${_e.name==="Administrators"?"text-purple-400":_e.name==="Operators"?"text-blue-400":_e.name==="Viewers"?"text-green-400":"text-bambu-gray"}`}),a.jsx("span",{className:"text-white font-medium",children:_e.name}),_e.is_system&&a.jsx("span",{className:"px-2 py-0.5 rounded text-xs bg-yellow-500/20 text-yellow-400",children:i("settings.system")})]}),a.jsxs("div",{className:"flex items-center gap-1",children:[m("groups:update")&&a.jsx(De,{size:"sm",variant:"ghost",onClick:()=>e(`/groups/${_e.id}/edit`),children:a.jsx(Ju,{className:"w-4 h-4"})}),m("groups:delete")&&!_e.is_system&&a.jsx(De,{size:"sm",variant:"ghost",onClick:()=>Tt(_e.id),children:a.jsx(Zt,{className:"w-4 h-4"})})]})]}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1 ml-6",children:_e.description||i("settings.noDescription")}),a.jsxs("div",{className:"flex items-center gap-4 mt-2 ml-6 text-xs text-bambu-gray",children:[a.jsx("span",{children:i("settings.userCount",{count:_e.user_count})}),a.jsx("span",{children:i("settings.permissionCount",{count:_e.permissions.length})})]})]},_e.id))})})]})})]}),!l&&a.jsx(wt,{children:a.jsx(St,{className:"py-6",children:a.jsxs("div",{className:"text-center",children:[a.jsx(D0,{className:"w-12 h-12 text-bambu-gray mx-auto mb-4"}),a.jsx("h3",{className:"text-lg font-medium text-white mb-2",children:i("settings.authDisabledTitle")}),a.jsx("p",{className:"text-sm text-bambu-gray mb-4 max-w-md mx-auto",children:i("settings.authDisabledMessage")}),a.jsxs("ul",{className:"space-y-2 text-sm text-bambu-gray mb-6 text-left max-w-xs mx-auto",children:[a.jsxs("li",{className:"flex items-start gap-2",children:[a.jsx(wr,{className:"w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0"}),a.jsx("span",{children:i("settings.authDisabledFeature1")})]}),a.jsxs("li",{className:"flex items-start gap-2",children:[a.jsx(wr,{className:"w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0"}),a.jsx("span",{children:i("settings.authDisabledFeature2")})]}),a.jsxs("li",{className:"flex items-start gap-2",children:[a.jsx(wr,{className:"w-4 h-4 text-bambu-green mt-0.5 flex-shrink-0"}),a.jsx("span",{children:i("settings.authDisabledFeature3")})]})]}),a.jsxs(De,{onClick:()=>e("/setup"),children:[a.jsx(Nd,{className:"w-4 h-4"}),i("settings.enableAuthentication")]})]})})})]}),I==="email"&&a.jsx("div",{className:"max-w-5xl",id:"card-smtp",children:a.jsx(brt,{})}),I==="ldap"&&a.jsx("div",{className:"max-w-5xl",id:"card-ldap",children:a.jsx(yrt,{})}),I==="twofa"&&a.jsx("div",{className:"max-w-2xl",children:a.jsx(wrt,{})}),I==="oidc"&&d&&a.jsx("div",{className:"max-w-3xl",children:a.jsx(_rt,{})})]}),st&&!ha?.advanced_auth_enabled&&a.jsx("div",{className:"fixed inset-0 bg-black flex items-center justify-center z-50 p-4",onClick:()=>{He(!1),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:a.jsxs(wt,{className:"w-full max-w-md",onClick:_e=>_e.stopPropagation(),children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(Ku,{className:"w-5 h-5 text-bambu-green"}),a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.createUser")})]}),a.jsx(De,{variant:"ghost",size:"sm",onClick:()=>{He(!1),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:a.jsx(Bt,{className:"w-5 h-5"})})]})}),a.jsxs(St,{children:[a.jsxs("div",{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("settings.username")}),a.jsx("input",{type:"text",value:jt.username,onChange:_e=>Jt({...jt,username:_e.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("settings.enterUsername"),autoComplete:"username"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("settings.password")}),a.jsx("input",{type:"password",value:jt.password,onChange:_e=>Jt({...jt,password:_e.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("settings.enterPassword"),autoComplete:"new-password",minLength:6})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("settings.confirmPassword")}),a.jsx("input",{type:"password",value:jt.confirmPassword,onChange:_e=>Jt({...jt,confirmPassword:_e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${jt.confirmPassword&&jt.password!==jt.confirmPassword?"border-red-500":"border-bambu-dark-tertiary"}`,placeholder:i("settings.confirmPasswordPlaceholder"),autoComplete:"new-password",minLength:6}),jt.confirmPassword&&jt.password!==jt.confirmPassword&&a.jsx("p",{className:"text-red-400 text-xs mt-1",children:i("settings.passwordsDoNotMatch")})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("settings.groups")}),a.jsxs("div",{className:"space-y-2 max-h-40 overflow-y-auto p-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg",children:[ka.map(_e=>a.jsxs("label",{className:"flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-tertiary cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:jt.group_ids.includes(_e.id),onChange:()=>od(_e.id),className:"w-4 h-4 rounded border-bambu-gray text-bambu-green focus:ring-bambu-green focus:ring-offset-0 bg-bambu-dark"}),a.jsx("span",{className:"text-sm text-white",children:_e.name}),_e.is_system&&a.jsx("span",{className:"text-xs text-yellow-400",children:i("settings.systemBadge")})]},_e.id)),ka.length===0&&a.jsx("p",{className:"text-sm text-bambu-gray",children:i("settings.noGroupsAvailable")})]})]})]}),a.jsxs("div",{className:"mt-6 flex justify-end gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{He(!1),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:i("common.cancel")}),a.jsx(De,{onClick:id,disabled:Vo.isPending||!jt.username||!jt.password||jt.password!==jt.confirmPassword||jt.password.length<6,children:Vo.isPending?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),i("settings.creating")]}):a.jsxs(a.Fragment,{children:[a.jsx(nr,{className:"w-4 h-4"}),i("settings.createUser")]})})]})]})]})}),st&&ha?.advanced_auth_enabled&&a.jsx(nrt,{formData:jt,setFormData:Jt,groups:ka,onClose:()=>{He(!1),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},onCreate:id,isCreating:Vo.isPending,isCreateButtonDisabled:Vo.isPending||!jt.username||!jt.email}),at&&Mt!==null&&a.jsx("div",{className:"fixed inset-0 bg-black flex items-center justify-center z-50 p-4",onClick:()=>{ht(!1),qt(null),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:a.jsxs(wt,{className:"w-full max-w-md",onClick:_e=>_e.stopPropagation(),children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(Ju,{className:"w-5 h-5 text-bambu-green"}),a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.editUser")})]}),a.jsx(De,{variant:"ghost",size:"sm",onClick:()=>{ht(!1),qt(null),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:a.jsx(Bt,{className:"w-5 h-5"})})]})}),a.jsxs(St,{children:[a.jsxs("div",{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm font-medium text-white mb-2",children:[i("settings.username")," ",ha?.advanced_auth_enabled&&a.jsx("span",{className:"text-red-400",children:"*"})]}),a.jsx("input",{type:"text",value:jt.username,onChange:_e=>Jt({...jt,username:_e.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("settings.enterUsername"),autoComplete:"username"})]}),a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm font-medium text-white mb-2",children:[i("users.form.email")||"Email"," ",ha?.advanced_auth_enabled?a.jsx("span",{className:"text-red-400",children:"*"}):a.jsxs("span",{className:"text-bambu-gray font-normal",children:["(",i("users.form.optional")||"optional",")"]})]}),a.jsx("input",{type:"email",value:jt.email,onChange:_e=>Jt({...jt,email:_e.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("users.form.emailPlaceholder")||"user@example.com",required:ha?.advanced_auth_enabled})]}),!ha?.advanced_auth_enabled&&a.jsxs(a.Fragment,{children:[a.jsxs("div",{children:[a.jsxs("label",{className:"block text-sm font-medium text-white mb-2",children:[i("users.form.password")||"Password"," ",a.jsxs("span",{className:"text-bambu-gray font-normal",children:["(",i("users.form.leaveBlankToKeep")||"leave blank to keep current",")"]})]}),a.jsx("input",{type:"password",value:jt.password,onChange:_e=>Jt({...jt,password:_e.target.value,confirmPassword:""}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("settings.enterNewPassword"),autoComplete:"new-password",minLength:6})]}),jt.password&&a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("settings.confirmPassword")}),a.jsx("input",{type:"password",value:jt.confirmPassword,onChange:_e=>Jt({...jt,confirmPassword:_e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${jt.confirmPassword&&jt.password!==jt.confirmPassword?"border-red-500":"border-bambu-dark-tertiary"}`,placeholder:i("settings.confirmNewPassword"),autoComplete:"new-password",minLength:6}),jt.confirmPassword&&jt.password!==jt.confirmPassword&&a.jsx("p",{className:"text-red-400 text-xs mt-1",children:i("settings.passwordsDoNotMatch")})]})]}),ha?.advanced_auth_enabled&&a.jsxs("div",{className:"bg-bambu-dark-secondary/50 border border-bambu-green/20 rounded-lg p-3 space-y-3",children:[a.jsx("p",{className:"text-sm text-bambu-gray",children:i("users.form.passwordManagedByAdvancedAuth")||'Password is managed by Advanced Authentication. Use "Reset Password" to send a new password to the user via email.'}),a.jsx(De,{variant:"secondary",size:"sm",onClick:()=>Mt&&ad.mutate(Mt),disabled:ad.isPending||!jt.email,className:"w-full",children:ad.isPending?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),i("users.form.resettingPassword")||"Resetting Password..."]}):a.jsxs(a.Fragment,{children:[a.jsx(Ts,{className:"w-4 h-4"}),i("users.form.resetPassword")||"Reset Password"]})})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:i("users.form.groups")||"Groups"}),a.jsx("div",{className:"space-y-2 max-h-40 overflow-y-auto p-2 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg",children:ka.map(_e=>a.jsxs("label",{className:"flex items-center gap-3 px-2 py-1.5 rounded hover:bg-bambu-dark-tertiary cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:jt.group_ids.includes(_e.id),onChange:()=>od(_e.id),className:"w-4 h-4 rounded border-bambu-gray text-bambu-green focus:ring-bambu-green focus:ring-offset-0 bg-bambu-dark"}),a.jsx("span",{className:"text-sm text-white",children:_e.name}),_e.is_system&&a.jsxs("span",{className:"text-xs text-yellow-400",children:["(",i("users.system")||"System",")"]})]},_e.id))})]})]}),a.jsxs("div",{className:"mt-6 flex justify-end gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{ht(!1),qt(null),Jt({username:"",password:"",email:"",confirmPassword:"",role:"user",group_ids:[]})},children:i("users.modal.cancel")||"Cancel"}),a.jsx(De,{onClick:()=>Om(Mt),disabled:wc.isPending||!jt.username||ha?.advanced_auth_enabled&&!jt.email||!!(!ha?.advanced_auth_enabled&&jt.password&&(jt.password!==jt.confirmPassword||jt.password.length<6)),children:wc.isPending?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),i("users.modal.saving")||"Saving..."]}):a.jsxs(a.Fragment,{children:[a.jsx(Ji,{className:"w-4 h-4"}),i("users.modal.saveChanges")||"Save Changes"]})})]})]})]})}),Vt!==null&&a.jsx("div",{className:"fixed inset-0 bg-black/80 flex items-center justify-center z-50 p-4",onClick:()=>{Gt(null),an(null)},children:a.jsxs(wt,{className:"w-full max-w-md",onClick:_e=>_e.stopPropagation(),children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center gap-2 text-red-400",children:[a.jsx(Zt,{className:"w-5 h-5"}),a.jsx("h3",{className:"text-lg font-semibold",children:i("settings.deleteUserTitle")})]})}),a.jsx(St,{className:"space-y-3",children:mn?a.jsx("div",{className:"flex items-center justify-center py-4",children:a.jsx("div",{className:"animate-spin rounded-full h-6 w-6 border-2 border-bambu-green border-t-transparent"})}):Qt&&Qt.archives+Qt.queue_items+Qt.library_files>0?a.jsxs(a.Fragment,{children:[a.jsx("p",{className:"text-white",children:i("settings.userHasCreated")}),a.jsxs("ul",{className:"list-disc list-inside text-bambu-gray space-y-1",children:[Qt.archives>0&&a.jsxs("li",{children:[Qt.archives," archive",Qt.archives!==1?"s":""]}),Qt.queue_items>0&&a.jsxs("li",{children:[Qt.queue_items," queue item",Qt.queue_items!==1?"s":""]}),Qt.library_files>0&&a.jsxs("li",{children:[Qt.library_files," library file",Qt.library_files!==1?"s":""]})]}),a.jsx("p",{className:"text-bambu-gray text-sm",children:i("settings.userItemsQuestion")}),a.jsxs("div",{className:"flex flex-col gap-2",children:[a.jsx(De,{variant:"danger",onClick:()=>Sl.mutate({id:Vt,deleteItems:!0}),disabled:Sl.isPending,className:"justify-center",children:i("settings.deleteUserAndItems")}),a.jsx(De,{variant:"secondary",onClick:()=>Sl.mutate({id:Vt,deleteItems:!1}),disabled:Sl.isPending,className:"justify-center",children:i("settings.deleteUserKeepItems")}),a.jsx(De,{variant:"ghost",onClick:()=>{Gt(null),an(null)},disabled:Sl.isPending,className:"justify-center",children:i("common.cancel")})]})]}):a.jsxs(a.Fragment,{children:[a.jsx("p",{className:"text-white",children:i("settings.deleteUserConfirm")}),a.jsx("p",{className:"text-bambu-gray text-sm",children:i("settings.actionCannotBeUndone")}),a.jsxs("div",{className:"flex gap-2 justify-end",children:[a.jsx(De,{variant:"ghost",onClick:()=>{Gt(null),an(null)},disabled:Sl.isPending,children:i("common.cancel")}),a.jsx(De,{variant:"danger",onClick:()=>Sl.mutate({id:Vt,deleteItems:!1}),disabled:Sl.isPending,children:i("settings.deleteUserTitle")})]})]})})]})}),zt!==null&&a.jsx(yn,{title:i("settings.deleteGroupTitle"),message:i("settings.deleteGroupMessage"),confirmText:i("settings.deleteGroup"),variant:"danger",onConfirm:()=>{_l.mutate(zt),Tt(null)},onCancel:()=>Tt(null)}),O==="failure-detection"&&a.jsx("div",{id:"card-failure-detection",children:a.jsx(prt,{})}),O==="backup"&&a.jsx("div",{id:"card-backup",children:a.jsx(hrt,{})}),Ge&&a.jsx(yn,{title:i("settings.disableAuthenticationTitle"),message:i("settings.disableAuthenticationMessage"),confirmText:i("settings.disableAuthentication"),variant:"danger",onConfirm:async()=>{try{await oe.disableAuth(),o(i("settings.toast.authDisabled"),"success"),await u(),et(!1),window.location.href="/"}catch(_e){const Et=_e instanceof Error?_e.message:i("settings.toast.authDisableFailed");o(Et,"error")}},onCancel:()=>et(!1)}),ve&&a.jsx("div",{className:"fixed inset-0 bg-black/70 flex items-center justify-center z-50 p-4",onClick:()=>{Xe(!1),Ve({currentPassword:"",newPassword:"",confirmPassword:""})},children:a.jsxs(wt,{className:"w-full max-w-md",onClick:_e=>_e.stopPropagation(),children:[a.jsx(pn,{children:a.jsxs("div",{className:"flex items-center justify-between",children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx(ao,{className:"w-5 h-5 text-bambu-green"}),a.jsx("h2",{className:"text-lg font-semibold text-white",children:i("settings.changePassword")})]}),a.jsx(De,{variant:"ghost",size:"sm",onClick:()=>{Xe(!1),Ve({currentPassword:"",newPassword:"",confirmPassword:""})},children:a.jsx(Bt,{className:"w-5 h-5"})})]})}),a.jsxs(St,{children:[a.jsxs("div",{className:"space-y-3",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:"Current Password"}),a.jsx("input",{type:"password",value:Pe.currentPassword,onChange:_e=>Ve({...Pe,currentPassword:_e.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("settings.enterCurrentPassword"),autoComplete:"current-password"})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:"New Password"}),a.jsx("input",{type:"password",value:Pe.newPassword,onChange:_e=>Ve({...Pe,newPassword:_e.target.value}),className:"w-full px-4 py-3 bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors",placeholder:i("settings.enterNewPasswordMin6"),autoComplete:"new-password",minLength:6})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm font-medium text-white mb-2",children:"Confirm New Password"}),a.jsx("input",{type:"password",value:Pe.confirmPassword,onChange:_e=>Ve({...Pe,confirmPassword:_e.target.value}),className:`w-full px-4 py-3 bg-bambu-dark-secondary border rounded-lg text-white placeholder-bambu-gray focus:outline-none focus:ring-2 focus:ring-bambu-green/50 focus:border-bambu-green transition-colors ${Pe.confirmPassword&&Pe.newPassword!==Pe.confirmPassword?"border-red-500":"border-bambu-dark-tertiary"}`,placeholder:i("settings.confirmNewPassword"),autoComplete:"new-password",minLength:6}),Pe.confirmPassword&&Pe.newPassword!==Pe.confirmPassword&&a.jsx("p",{className:"text-red-400 text-xs mt-1",children:i("settings.passwordsDoNotMatch")})]})]}),a.jsxs("div",{className:"mt-6 flex justify-end gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>{Xe(!1),Ve({currentPassword:"",newPassword:"",confirmPassword:""})},children:i("common.cancel")}),a.jsx(De,{onClick:async()=>{if(Pe.newPassword!==Pe.confirmPassword){o(i("settings.toast.passwordsDoNotMatch"),"error");return}if(Pe.newPassword.length<6){o(i("settings.toast.passwordTooShort"),"error");return}de(!0);try{await oe.changePassword(Pe.currentPassword,Pe.newPassword),o(i("settings.toast.passwordChanged"),"success"),Xe(!1),Ve({currentPassword:"",newPassword:"",confirmPassword:""})}catch(_e){const Et=_e instanceof Error?_e.message:"Failed to change password";o(Et,"error")}finally{de(!1)}},disabled:we||!Pe.currentPassword||!Pe.newPassword||Pe.newPassword!==Pe.confirmPassword||Pe.newPassword.length<6,children:we?a.jsxs(a.Fragment,{children:[a.jsx(mt,{className:"w-4 h-4 animate-spin"}),i("settings.changing")]}):a.jsxs(a.Fragment,{children:[a.jsx(ao,{className:"w-4 h-4"}),i("settings.changePassword")]})})]})]})]})})]})]})]})})}const cce=t=>{const e=parseFloat(t);return(Math.trunc(e*1e3)/1e3).toFixed(3)},Ert=t=>t.startsWith("HH")?"HF":"S",Drt=t=>{const e=t.match(/^([A-Z]{2}\d{2})/);return e?e[1]:"HH00"},dce=t=>{const e=["High Flow_","High Flow ","Standard_","Standard ","HF_","HF ","S_","S "];for(const r of e)if(t.startsWith(r))return t.slice(r.length);const n=t.indexOf("_");return n>0?t.slice(n+1):t};function z3({profile:t,onEdit:e,onCopy:n,selectionMode:r,isSelected:i,onToggleSelect:s,note:o}){const l=Ert(t.nozzle_id),c=t.nozzle_diameter,d=()=>{r&&s?s():e()};return a.jsxs("div",{className:"flex items-center gap-2",children:[r&&a.jsx("button",{onClick:s,className:"text-bambu-gray hover:text-white transition-colors p-1",children:i?a.jsx(As,{className:"w-4 h-4 text-bambu-green"}):a.jsx(mo,{className:"w-4 h-4"})}),a.jsxs("button",{onClick:d,className:`flex-1 text-left px-3 py-2 bg-bambu-dark rounded hover:bg-bambu-dark-tertiary transition-colors ${i?"ring-1 ring-bambu-green":""}`,children:[a.jsxs("div",{className:"flex items-center gap-2",children:[a.jsx("span",{className:"text-bambu-green font-mono text-sm font-bold whitespace-nowrap",children:cce(t.k_value)}),a.jsx("span",{className:"text-white text-sm truncate flex-1",title:t.name,children:t.name||"Unnamed"}),o&&a.jsx("span",{title:"Has note",children:a.jsx(pJ,{className:"w-3 h-3 text-yellow-500"})}),a.jsxs("span",{className:"text-xs text-bambu-gray whitespace-nowrap",children:[l," ",c]})]}),o&&a.jsxs("div",{className:"text-xs mt-0.5 truncate text-yellow-500/70",title:o,children:["Note: ",o.length>50?o.substring(0,50)+"...":o]})]}),!r&&n&&a.jsx("button",{onClick:u=>{u.stopPropagation(),n()},className:"text-bambu-gray hover:text-white transition-colors p-1",title:"Copy profile",children:a.jsx(ns,{className:"w-4 h-4"})})]})}function U3({profile:t,printerId:e,nozzleDiameter:n,existingProfiles:r=[],builtinFilaments:i=[],isDualNozzle:s=!1,initialNote:o="",initialNoteKey:l=null,onClose:c,onSave:d,onSaveNote:u,hasPermission:m}){const{t:p}=_t(),{showToast:f}=rn(),[x,v]=w.useState(t?.name||""),[b,g]=w.useState(t?.k_value?cce(t.k_value):"0.020"),[S,N]=w.useState(t?.filament_id||""),[P,C]=w.useState(t?.nozzle_id?Drt(t.nozzle_id):"HH00"),[A,T]=w.useState(t?.nozzle_diameter||n),[F,k]=w.useState(t?[t.extruder_id]:s?[0,1]:[0]),[E,$]=w.useState(!1),[z,X]=w.useState({current:0,total:0}),[R,ne]=w.useState(o),re=la.useMemo(()=>{const pe=new Map;for(const fe of i)pe.set(fe.filament_id,fe.name);const be=new Map;for(const fe of r)if(fe.filament_id&&!be.has(fe.filament_id)){const Y=pe.get(fe.filament_id)||dce(fe.name||"");be.set(fe.filament_id,{id:fe.filament_id,name:Y||fe.filament_id})}return Array.from(be.values()).sort((fe,B)=>fe.name.localeCompare(B.name))},[r,i]),J=ot({mutationFn:pe=>(console.log("[KProfile] Calling API..."),oe.setKProfile(e,pe)),onSuccess:pe=>{if(console.log("[KProfile] Save success:",pe),f(p("kProfiles.toast.profileSaved")),u&&R!==o){let be;R===""&&l?be=l:t&&t.slot_id>0?be=t.setting_id||`slot_${t.slot_id}_${t.filament_id}_${t.extruder_id}`:be=`name_${x}_${S}`,u(be,R)}$(!0),setTimeout(()=>{$(!1),d()},2500)},onError:pe=>{console.error("[KProfile] Save error:",pe),f(pe.message,"error"),$(!1)}}),ue=ot({mutationFn:pe=>(console.log("[KProfile] Deleting profile..."),oe.deleteKProfile(e,pe)),onSuccess:pe=>{console.log("[KProfile] Delete success:",pe),f(p("kProfiles.toast.profileDeleted")),$(!0),setTimeout(()=>{$(!1),c()},4e3)},onError:pe=>{console.error("[KProfile] Delete error:",pe),f(pe.message,"error"),$(!1)}}),[ie,se]=w.useState(!1),K=()=>{t&&ue.mutate({slot_id:t.slot_id,extruder_id:t.extruder_id,nozzle_id:t.nozzle_id,nozzle_diameter:t.nozzle_diameter,filament_id:t.filament_id,setting_id:t.setting_id})},ae=async pe=>{if(pe.preventDefault(),s&&!t&&F.length===0){f(p("kProfiles.toast.selectAtLeastOneExtruder"),"error");return}const be=parseFloat(b).toFixed(6),fe=`${P}-${A}`;if(t||F.length===1){const Y={name:x,k_value:be,filament_id:S,nozzle_id:fe,nozzle_diameter:A,extruder_id:t?t.extruder_id:F[0],setting_id:t?.setting_id,slot_id:t?.slot_id??0};console.log("[KProfile] Saving profile:",Y),J.mutate(Y);return}$(!0),X({current:1,total:F.length});const B=F.map(Y=>({name:x,k_value:be,filament_id:S,nozzle_id:fe,nozzle_diameter:A,extruder_id:Y,setting_id:void 0,slot_id:0}));console.log(`[KProfile] Saving ${B.length} profiles in batch:`,B);try{if(await oe.setKProfilesBatch(e,B),f(p("kProfiles.toast.profilesSaved",{count:F.length})),u&&R){const Y=`name_${x}_${S}`;u(Y,R)}}catch(Y){console.error("[KProfile] Failed to save batch:",Y),f(p("kProfiles.toast.failedToSaveBatch"),"error"),$(!1),X({current:0,total:0});return}X({current:F.length,total:F.length}),setTimeout(()=>{$(!1),X({current:0,total:0}),d()},3e3)};return a.jsxs("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4",children:[a.jsxs(wt,{className:"w-full max-w-md relative",children:[E&&a.jsxs("div",{className:"absolute inset-0 bg-bambu-dark-secondary/90 flex flex-col items-center justify-center z-10 rounded-lg",children:[a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin mb-3"}),a.jsx("p",{className:"text-white font-medium",children:z.total>1?p("kProfiles.modal.savingExtruder",{current:z.current,total:z.total}):p("kProfiles.modal.syncing")}),a.jsx("p",{className:"text-bambu-gray text-sm mt-1",children:p("kProfiles.modal.pleaseWait")})]}),a.jsxs(St,{className:"p-0",children:[a.jsxs("div",{className:"flex items-center justify-between p-4 border-b border-bambu-dark-tertiary",children:[a.jsx("h2",{className:"text-xl font-semibold text-white",children:p(t?"kProfiles.modal.editTitle":"kProfiles.modal.addTitle")}),a.jsx("button",{onClick:c,className:"text-bambu-gray hover:text-white transition-colors",disabled:E,children:a.jsx(Bt,{className:"w-5 h-5"})})]}),a.jsxs("form",{onSubmit:ae,className:"p-4 space-y-4",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p("kProfiles.modal.profileName")}),a.jsx("input",{type:"text",value:x,onChange:pe=>v(pe.target.value),disabled:!!t,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${t?"opacity-60 cursor-not-allowed":""}`,placeholder:p("kProfiles.modal.profileNamePlaceholder"),required:!t})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p("kProfiles.modal.kValue")}),a.jsx("input",{type:"text",inputMode:"decimal",value:b,onChange:pe=>{const be=pe.target.value;(be===""||/^\d*\.?\d*$/.test(be))&&g(be)},onBlur:pe=>{const be=parseFloat(pe.target.value);isNaN(be)||g((Math.trunc(be*1e3)/1e3).toFixed(3))},className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none font-mono",placeholder:p("kProfiles.modal.kValuePlaceholder"),required:!0}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:p("kProfiles.modal.kValueHelp")})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p("kProfiles.modal.filament")}),a.jsxs("select",{value:S,onChange:pe=>{const be=pe.target.value;if(N(be),!t&&be&&!x){const fe=re.find(B=>B.id===be);fe&&v(`${P==="HH00"?"HF":"S"} ${fe.name}`)}},disabled:!!t,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${t?"opacity-60 cursor-not-allowed":""}`,required:!t,children:[a.jsx("option",{value:"",children:p("kProfiles.modal.selectFilament")}),t?.filament_id&&a.jsx("option",{value:t.filament_id,children:re.find(pe=>pe.id===t.filament_id)?.name||t.filament_id},t.filament_id),!t&&re.map(pe=>a.jsx("option",{value:pe.id,children:pe.name},pe.id))]}),!t&&re.length===0&&a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:p("kProfiles.modal.noFilamentsHelp")})]}),a.jsxs("div",{className:"grid grid-cols-2 gap-4",children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p("kProfiles.modal.flowType")}),a.jsxs("select",{value:P,onChange:pe=>{const be=pe.target.value;if(C(be),!t&&S&&!x){const fe=re.find(B=>B.id===S);fe&&v(`${be==="HS00"?"HF":"S"} ${fe.name}`)}},disabled:!!t,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${t?"opacity-60 cursor-not-allowed":""}`,children:[a.jsx("option",{value:"HH00",children:p("kProfiles.modal.highFlow")}),a.jsx("option",{value:"HS00",children:p("kProfiles.modal.standard")})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p("kProfiles.modal.nozzleSize")}),a.jsxs("select",{value:A,onChange:pe=>T(pe.target.value),disabled:!!t,className:`w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none ${t?"opacity-60 cursor-not-allowed":""}`,children:[a.jsx("option",{value:"0.2",children:"0.2mm"}),a.jsx("option",{value:"0.4",children:"0.4mm"}),a.jsx("option",{value:"0.6",children:"0.6mm"}),a.jsx("option",{value:"0.8",children:"0.8mm"})]})]})]}),s&&a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p(t?"kProfiles.modal.extruder":"kProfiles.modal.extruders")}),t?a.jsx("div",{className:"px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white opacity-60",children:t.extruder_id===1?p("kProfiles.modal.left"):p("kProfiles.modal.right")}):a.jsxs("div",{className:"flex gap-4",children:[a.jsxs("label",{className:"flex items-center gap-2 cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:F.includes(1),onChange:pe=>{pe.target.checked?k([...F,1]):k(F.filter(be=>be!==1))},className:"w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green focus:ring-offset-0 accent-bambu-green"}),a.jsx("span",{className:"text-white",children:p("kProfiles.modal.left")})]}),a.jsxs("label",{className:"flex items-center gap-2 cursor-pointer",children:[a.jsx("input",{type:"checkbox",checked:F.includes(0),onChange:pe=>{pe.target.checked?k([...F,0]):k(F.filter(be=>be!==0))},className:"w-4 h-4 rounded border-bambu-dark-tertiary bg-bambu-dark text-bambu-green focus:ring-bambu-green focus:ring-offset-0 accent-bambu-green"}),a.jsx("span",{className:"text-white",children:p("kProfiles.modal.right")})]})]})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:p("kProfiles.modal.notes")}),a.jsx("textarea",{value:R,onChange:pe=>ne(pe.target.value),placeholder:p("kProfiles.modal.notesPlaceholder"),rows:2,className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none resize-none"}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:p("kProfiles.modal.notesHelp")})]}),a.jsxs("div",{className:"flex gap-2 pt-4",children:[t&&a.jsx(De,{type:"button",variant:"secondary",onClick:()=>se(!0),disabled:ue.isPending||E||!m("kprofiles:delete"),title:m("kprofiles:delete")?void 0:p("kProfiles.permission.noDelete"),className:"text-red-500 hover:bg-red-500/10",children:ue.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Zt,{className:"w-4 h-4"})}),a.jsx(De,{type:"button",variant:"secondary",onClick:c,disabled:E,className:"flex-1",children:p("common.cancel")}),a.jsxs(De,{type:"submit",disabled:J.isPending||E||!m(t?"kprofiles:update":"kprofiles:create"),title:m(t?"kprofiles:update":"kprofiles:create")?void 0:p(t?"kProfiles.permission.noUpdate":"kProfiles.permission.noCreate"),className:"flex-1",children:[J.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(aS,{className:"w-4 h-4"}),p("common.save")]})]})]})]})]}),ie&&a.jsx("div",{className:"fixed inset-0 bg-black/70 flex items-center justify-center z-[60]",children:a.jsx(wt,{className:"w-full max-w-sm",children:a.jsxs(St,{className:"p-6",children:[a.jsxs("div",{className:"flex items-center gap-3 mb-4",children:[a.jsx("div",{className:"w-10 h-10 rounded-full bg-red-500/20 flex items-center justify-center",children:a.jsx(Zt,{className:"w-5 h-5 text-red-500"})}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-lg font-semibold text-white",children:p("kProfiles.deleteConfirm.title")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:p("kProfiles.deleteConfirm.cannotUndo")})]})]}),a.jsx("p",{className:"text-bambu-gray mb-6",children:p("kProfiles.deleteConfirm.message",{name:t?.name})}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>se(!1),className:"flex-1",children:p("common.cancel")}),a.jsxs(De,{onClick:()=>{se(!1),K()},disabled:ue.isPending,className:"flex-1 bg-red-500 hover:bg-red-600 text-white",children:[ue.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Zt,{className:"w-4 h-4"}),p("common.delete")]})]})]})})})]})}const Bk={NOZZLE_DIAMETER:"bambusy_kprofiles_nozzle",SORT_OPTION:"bambusy_kprofiles_sort"};function Frt(){const{t}=_t(),{showToast:e}=rn(),{hasPermission:n}=gr(),[r,i]=w.useState(null),[s,o]=w.useState(()=>localStorage.getItem(Bk.NOZZLE_DIAMETER)||"0.4"),[l,c]=w.useState(null),[d,u]=w.useState(!1),[m,p]=w.useState(null),[f,x]=w.useState(""),[v,b]=w.useState("all"),[g,S]=w.useState("all"),[N,P]=w.useState(()=>localStorage.getItem(Bk.SORT_OPTION)||"name"),[C,A]=w.useState(!1),[T,F]=w.useState(new Set),[k,E]=w.useState(!1),[$,z]=w.useState(!1),X=w.useCallback(L=>`${L.slot_id}_${L.extruder_id}`,[]);w.useEffect(()=>{localStorage.setItem(Bk.NOZZLE_DIAMETER,s)},[s]),w.useEffect(()=>{localStorage.setItem(Bk.SORT_OPTION,N)},[N]);const{data:R,isLoading:ne}=Qe({queryKey:["printers"],queryFn:oe.getPrinters}),{data:re,isLoading:J,isFetching:ue,error:ie,refetch:se}=Qe({queryKey:["kprofiles",r,s],queryFn:async()=>{console.log("[KProfiles] Fetching profiles for printer",r,"nozzle",s);const L=await oe.getKProfiles(r,s);return console.log("[KProfiles] Received profiles:",L?.profiles?.length||0,"profiles"),L},enabled:!!r,retry:!1,staleTime:0,gcTime:0,refetchOnMount:"always"}),{data:K}=Qe({queryKey:["kprofiles",r,"0.4"],queryFn:()=>oe.getKProfiles(r,"0.4"),enabled:!!r,staleTime:6e4}),{data:ae}=Qe({queryKey:["builtinFilaments"],queryFn:()=>oe.getBuiltinFilaments(),staleTime:3e5}),{data:pe}=Qe({queryKey:["filamentIdMap"],queryFn:()=>oe.getFilamentIdMap(),staleTime:3e5}),{data:be,refetch:fe}=Qe({queryKey:["kprofile-notes",r],queryFn:()=>oe.getKProfileNotes(r),enabled:!!r,staleTime:3e4}),B=ie?.message?.includes("not connected");w.useEffect(()=>{if(!r&&R&&R.length>0){const L=R.find(ee=>ee.is_active);L&&i(L.id)}},[r,R]),w.useEffect(()=>{if(r){const L=setTimeout(()=>{se()},150);return()=>clearTimeout(L)}},[r,s]);const Y=R?.filter(L=>L.is_active)||[],D=la.useMemo(()=>{const L=new Map;if(ae)for(const ee of ae)L.set(ee.filament_id,ee.name);if(pe)for(const[ee,ge]of Object.entries(pe))L.has(ee)||L.set(ee,ge);return L},[ae,pe]),M=la.useMemo(()=>Array.from(D.entries()).map(([L,ee])=>({filament_id:L,name:ee})),[D]),U=la.useCallback(L=>D.get(L.filament_id)||dce(L.name),[D]),Q=la.useMemo(()=>re?.profiles?re.profiles.filter(ee=>{const ge=f.toLowerCase(),ke=!ge||ee.name.toLowerCase().includes(ge)||ee.filament_id.toLowerCase().includes(ge),je=v==="all"||v==="left"&&ee.extruder_id===1||v==="right"&&ee.extruder_id===0,Te=g==="all"||g==="hf"&&ee.nozzle_id.startsWith("HH")||g==="s"&&ee.nozzle_id.startsWith("HS");return ke&&je&&Te}).sort((ee,ge)=>{switch(N){case"k_value":return parseFloat(ee.k_value)-parseFloat(ge.k_value);case"filament":return U(ee).localeCompare(U(ge));default:return ee.name.localeCompare(ge.name)}}):[],[re?.profiles,f,v,g,N,U]),O=R?.find(L=>L.id===r),ce=O?.nozzle_count===2;w.useEffect(()=>{const L=ee=>{ee.target instanceof HTMLInputElement||ee.target instanceof HTMLTextAreaElement||ee.target instanceof HTMLSelectElement||l||d||m||(ee.key==="r"||ee.key==="R"?(ee.preventDefault(),se()):ee.key==="n"||ee.key==="N"?(ee.preventDefault(),u(!0)):ee.key==="Escape"&&C&&(ee.preventDefault(),A(!1),F(new Set)))};return window.addEventListener("keydown",L),()=>window.removeEventListener("keydown",L)},[l,d,m,C,se]);const I=w.useCallback(()=>{if(!re?.profiles||re.profiles.length===0){e(t("kProfiles.toast.noProfilesToExport"),"error");return}const L={version:1,exported_at:new Date().toISOString(),printer:O?.name||"Unknown",nozzle_diameter:s,profiles:re.profiles.map(je=>({name:je.name,k_value:je.k_value,filament_id:je.filament_id,nozzle_id:je.nozzle_id,nozzle_diameter:je.nozzle_diameter,extruder_id:je.extruder_id}))},ee=new Blob([JSON.stringify(L,null,2)],{type:"application/json"}),ge=URL.createObjectURL(ee),ke=document.createElement("a");ke.href=ge,ke.download=`kprofiles_${O?.name||"printer"}_${s}mm_${new Date().toISOString().split("T")[0]}.json`,document.body.appendChild(ke),ke.click(),document.body.removeChild(ke),URL.revokeObjectURL(ge),e(t("kProfiles.toast.exportedProfiles",{count:re.profiles.length}))},[re?.profiles,O,s,e,t]),G=w.useCallback(()=>{const L=document.createElement("input");L.type="file",L.accept=".json",L.onchange=async ee=>{const ge=ee.target.files?.[0];if(ge)try{const ke=await ge.text(),je=JSON.parse(ke);if(!je.profiles||!Array.isArray(je.profiles)){e(t("kProfiles.toast.invalidFileFormat"),"error");return}let Te=0;for(const xe of je.profiles)if(!(!xe.name||!xe.k_value||!xe.filament_id))try{await oe.setKProfile(r,{name:xe.name,k_value:parseFloat(xe.k_value).toFixed(6),filament_id:xe.filament_id,nozzle_id:xe.nozzle_id||`HH00-${s}`,nozzle_diameter:xe.nozzle_diameter||s,extruder_id:xe.extruder_id??0,slot_id:0}),Te++,await new Promise(Fe=>setTimeout(Fe,500))}catch(Fe){console.error("Failed to import profile:",xe.name,Fe)}e(t("kProfiles.toast.importedProfiles",{count:Te,total:je.profiles.length})),se()}catch(ke){console.error("Import error:",ke),e(t("kProfiles.toast.failedToParseImport"),"error")}},L.click()},[r,s,e,se,t]),q=w.useCallback(L=>{F(ee=>{const ge=new Set(ee);return ge.has(L)?ge.delete(L):ge.add(L),ge})},[]),W=w.useCallback(()=>{F(new Set(Q.map(L=>X(L))))},[Q,X]),te=w.useCallback(()=>{T.size!==0&&E(!0)},[T.size]),le=w.useCallback(async()=>{const L=Q.filter(ge=>T.has(X(ge)));z(!0);let ee=0;for(const ge of L)try{await oe.deleteKProfile(r,{slot_id:ge.slot_id,extruder_id:ge.extruder_id,nozzle_id:ge.nozzle_id,nozzle_diameter:ge.nozzle_diameter,filament_id:ge.filament_id,setting_id:ge.setting_id}),ee++,await new Promise(ke=>setTimeout(ke,300))}catch(ke){console.error("Failed to delete profile:",ge.name,ke)}e(t("kProfiles.toast.profilesDeleted",{count:ee})),z(!1),E(!1),A(!1),F(new Set),se()},[r,T,Q,e,se,X,t]),ye=w.useCallback(L=>{const ee=[];return L.setting_id&&ee.push(L.setting_id),ee.push(`slot_${L.slot_id}_${L.filament_id}_${L.extruder_id}`),ee.push(`name_${L.name}_${L.filament_id}`),ee},[]),he=w.useCallback(async(L,ee)=>{if(r)try{await oe.setKProfileNote(r,L,ee),fe()}catch(ge){console.error("Failed to save note:",ge),e(t("kProfiles.toast.failedToSaveNote"),"error")}},[r,fe,e,t]),me=w.useCallback(L=>{if(!be?.notes)return{note:"",key:null};const ee=ye(L);for(const ge of ee)if(be.notes[ge])return{note:be.notes[ge],key:ge};return{note:"",key:null}},[be,ye]),H=w.useCallback(L=>me(L).note,[me]);return ne?a.jsx("div",{className:"flex justify-center py-12",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})}):!R||R.length===0?a.jsx(wt,{children:a.jsxs(St,{className:"py-12 text-center",children:[a.jsx(Oa,{className:"w-12 h-12 text-bambu-gray mx-auto mb-4"}),a.jsx("h3",{className:"text-lg font-semibold text-white mb-2",children:t("kProfiles.noPrintersConfigured")}),a.jsx("p",{className:"text-bambu-gray",children:t("kProfiles.addPrinterInSettings")})]})}):Y.length===0?a.jsx(wt,{children:a.jsxs(St,{className:"py-12 text-center",children:[a.jsx(Mr,{className:"w-12 h-12 text-bambu-gray mx-auto mb-4"}),a.jsx("h3",{className:"text-lg font-semibold text-white mb-2",children:t("kProfiles.noActivePrinters")}),a.jsx("p",{className:"text-bambu-gray",children:t("kProfiles.enablePrinterConnection")})]})}):a.jsxs(a.Fragment,{children:[ue&&!J&&a.jsxs("div",{className:"fixed inset-0 bg-black/50 flex flex-col items-center justify-center z-40",children:[a.jsx(mt,{className:"w-10 h-10 text-bambu-green animate-spin mb-3"}),a.jsx("p",{className:"text-white font-medium",children:t("kProfiles.loadingProfiles")})]}),a.jsxs("div",{className:"flex flex-wrap gap-4 mb-6",children:[a.jsxs("div",{className:"flex-1 min-w-48",children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:t("kProfiles.printer")}),a.jsx("select",{value:r||"",onChange:L=>i(parseInt(L.target.value)),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:Y.map(L=>a.jsx("option",{value:L.id,children:L.name},L.id))})]}),a.jsxs("div",{className:"w-32",children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:t("kProfiles.nozzle")}),a.jsxs("select",{value:s,onChange:L=>o(L.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"0.2",children:"0.2mm"}),a.jsx("option",{value:"0.4",children:"0.4mm"}),a.jsx("option",{value:"0.6",children:"0.6mm"}),a.jsx("option",{value:"0.8",children:"0.8mm"})]})]}),a.jsxs("div",{className:"flex items-end gap-2",children:[a.jsxs(De,{variant:"secondary",onClick:()=>se(),disabled:ue||!n("kprofiles:read"),title:n("kprofiles:read")?void 0:t("kProfiles.permission.noRead"),children:[a.jsx(sr,{className:`w-4 h-4 ${ue?"animate-spin":""}`}),t("kProfiles.refresh")]}),a.jsxs(De,{onClick:()=>u(!0),disabled:!n("kprofiles:create"),title:n("kprofiles:create")?void 0:t("kProfiles.permission.noCreate"),children:[a.jsx(nr,{className:"w-4 h-4"}),t("kProfiles.addProfile")]})]})]}),a.jsxs("div",{className:"flex flex-wrap gap-4 mb-4",children:[a.jsxs("div",{className:"flex-1 min-w-48 relative",children:[a.jsx(Nr,{className:"absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray"}),a.jsx("input",{type:"text",value:f,onChange:L=>x(L.target.value),placeholder:t("kProfiles.searchPlaceholder"),className:"w-full pl-10 pr-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray focus:border-bambu-green focus:outline-none"})]}),ce&&a.jsx("div",{className:"w-36",children:a.jsxs("select",{value:v,onChange:L=>b(L.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"all",children:t("kProfiles.allExtruders")}),a.jsx("option",{value:"left",children:t("kProfiles.leftOnly")}),a.jsx("option",{value:"right",children:t("kProfiles.rightOnly")})]})}),a.jsx("div",{className:"w-32",children:a.jsxs("select",{value:g,onChange:L=>S(L.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"all",children:t("kProfiles.allFlow")}),a.jsx("option",{value:"hf",children:t("kProfiles.hfOnly")}),a.jsx("option",{value:"s",children:t("kProfiles.sOnly")})]})}),a.jsx("div",{className:"w-32",children:a.jsxs("select",{value:N,onChange:L=>P(L.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"name",children:t("kProfiles.sortName")}),a.jsx("option",{value:"k_value",children:t("kProfiles.sortKValue")}),a.jsx("option",{value:"filament",children:t("kProfiles.sortFilament")})]})})]}),a.jsxs("div",{className:"flex flex-wrap gap-2 mb-6",children:[a.jsxs(De,{variant:"secondary",onClick:I,disabled:!re?.profiles?.length||!n("kprofiles:read"),title:n("kprofiles:read")?void 0:t("kProfiles.permission.noExport"),children:[a.jsx(aa,{className:"w-4 h-4"}),t("kProfiles.export")]}),a.jsxs(De,{variant:"secondary",onClick:G,disabled:!n("kprofiles:create"),title:n("kprofiles:create")?void 0:t("kProfiles.permission.noImport"),children:[a.jsx(_a,{className:"w-4 h-4"}),t("kProfiles.import")]}),a.jsx("div",{className:"flex-1"}),C?a.jsxs(a.Fragment,{children:[a.jsxs(De,{variant:"secondary",onClick:W,children:[a.jsx(As,{className:"w-4 h-4"}),t("kProfiles.selectAll")]}),a.jsxs(De,{variant:"secondary",onClick:te,disabled:T.size===0||!n("kprofiles:delete"),className:"text-red-500 hover:bg-red-500/10",title:n("kprofiles:delete")?void 0:t("kProfiles.permission.noDelete"),children:[a.jsx(Zt,{className:"w-4 h-4"}),t("kProfiles.delete")," (",T.size,")"]}),a.jsxs(De,{variant:"secondary",onClick:()=>{A(!1),F(new Set)},children:[a.jsx(Bt,{className:"w-4 h-4"}),t("common.cancel")]})]}):a.jsxs(De,{variant:"secondary",onClick:()=>A(!0),disabled:!Q.length||!n("kprofiles:delete"),title:n("kprofiles:delete")?void 0:t("kProfiles.permission.noDelete"),children:[a.jsx(As,{className:"w-4 h-4"}),t("kProfiles.select")]})]}),J?a.jsx("div",{className:"flex justify-center py-12",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})}):B?a.jsx(wt,{children:a.jsxs(St,{className:"py-12 text-center",children:[a.jsx(qd,{className:"w-12 h-12 text-bambu-gray mx-auto mb-4"}),a.jsx("h3",{className:"text-lg font-semibold text-white mb-2",children:t("kProfiles.printerOffline")}),a.jsx("p",{className:"text-bambu-gray mb-4",children:t("kProfiles.printerOfflineDesc")}),a.jsxs(De,{variant:"secondary",onClick:()=>se(),children:[a.jsx(sr,{className:"w-4 h-4"}),t("common.refresh")]})]})}):Q.length>0?ce?a.jsxs("div",{className:"grid grid-cols-2 gap-4",children:[a.jsxs("div",{children:[a.jsx("h3",{className:"text-sm font-medium text-bambu-gray mb-2 px-1",children:t("kProfiles.leftExtruder")}),a.jsx("div",{className:"space-y-1",children:Q.filter(L=>L.extruder_id===1).map(L=>a.jsx(z3,{profile:L,onEdit:()=>c(L),onCopy:()=>p(L),selectionMode:C,isSelected:T.has(X(L)),onToggleSelect:()=>q(X(L)),note:H(L)},X(L)))})]}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-sm font-medium text-bambu-gray mb-2 px-1",children:t("kProfiles.rightExtruder")}),a.jsx("div",{className:"space-y-1",children:Q.filter(L=>L.extruder_id===0).map(L=>a.jsx(z3,{profile:L,onEdit:()=>c(L),onCopy:()=>p(L),selectionMode:C,isSelected:T.has(X(L)),onToggleSelect:()=>q(X(L)),note:H(L)},X(L)))})]})]}):a.jsx("div",{className:"space-y-1",children:Q.map(L=>a.jsx(z3,{profile:L,onEdit:()=>c(L),onCopy:()=>p(L),selectionMode:C,isSelected:T.has(X(L)),onToggleSelect:()=>q(X(L)),note:H(L)},X(L)))}):f||v!=="all"||g!=="all"?a.jsx(wt,{children:a.jsxs(St,{className:"py-12 text-center",children:[a.jsx(Nr,{className:"w-12 h-12 text-bambu-gray mx-auto mb-4"}),a.jsx("h3",{className:"text-lg font-semibold text-white mb-2",children:t("kProfiles.noMatchingProfiles")}),a.jsx("p",{className:"text-bambu-gray",children:t("kProfiles.noMatchingProfilesDesc")})]})}):a.jsx(wt,{children:a.jsxs(St,{className:"py-12 text-center",children:[a.jsx(aS,{className:"w-12 h-12 text-bambu-gray mx-auto mb-4"}),a.jsx("h3",{className:"text-lg font-semibold text-white mb-2",children:t("kProfiles.noKProfiles")}),a.jsx("p",{className:"text-bambu-gray mb-4",children:t("kProfiles.noKProfilesDesc",{diameter:s})}),a.jsxs(De,{onClick:()=>u(!0),children:[a.jsx(nr,{className:"w-4 h-4"}),t("kProfiles.createFirstProfile")]})]})}),l&&r&&(()=>{const{note:L,key:ee}=me(l);return a.jsx(U3,{profile:l,printerId:r,nozzleDiameter:s,existingProfiles:K?.profiles||re?.profiles,builtinFilaments:M,isDualNozzle:ce,initialNote:L,initialNoteKey:ee,onSaveNote:he,hasPermission:n,onClose:()=>{console.log("[KProfiles] Edit modal onClose - refetching profiles..."),c(null),se()},onSave:()=>{c(null),se()}})})(),d&&r&&a.jsx(U3,{printerId:r,nozzleDiameter:s,existingProfiles:K?.profiles||re?.profiles,builtinFilaments:M,isDualNozzle:ce,onSaveNote:he,hasPermission:n,onClose:()=>{u(!1),se()},onSave:()=>{u(!1),se()}}),m&&r&&a.jsx(U3,{printerId:r,nozzleDiameter:s,existingProfiles:K?.profiles||re?.profiles,builtinFilaments:M,isDualNozzle:ce,onSaveNote:he,hasPermission:n,profile:{...m,slot_id:0,name:`${m.name} (Copy)`},onClose:()=>{p(null),se()},onSave:()=>{p(null),se()}}),k&&a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50 p-4",children:a.jsx(wt,{className:"w-full max-w-sm",children:a.jsxs(St,{className:"p-6",children:[a.jsxs("div",{className:"flex items-center gap-3 mb-4",children:[a.jsx("div",{className:"w-10 h-10 rounded-full bg-red-500/20 flex items-center justify-center",children:a.jsx(Zt,{className:"w-5 h-5 text-red-500"})}),a.jsxs("div",{children:[a.jsx("h3",{className:"text-lg font-semibold text-white",children:t("kProfiles.bulkDelete.title")}),a.jsx("p",{className:"text-sm text-bambu-gray",children:t("kProfiles.bulkDelete.cannotUndo")})]})]}),a.jsx("p",{className:"text-bambu-gray mb-6",children:t("kProfiles.bulkDelete.message",{count:T.size})}),a.jsxs("div",{className:"flex gap-3",children:[a.jsx(De,{variant:"secondary",onClick:()=>E(!1),disabled:$,className:"flex-1",children:t("common.cancel")}),a.jsxs(De,{onClick:le,disabled:$,className:"flex-1 bg-red-500 hover:bg-red-600 text-white",children:[$?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Zt,{className:"w-4 h-4"}),t("common.delete")]})]})]})})})]})}const uce=["PLA","PETG","PCTG","ABS","ASA","TPU","PC","PA","PVA","HIPS","PP","PET","NYLON"],Rrt={PLA:"E8E8E8",PETG:"4A90D9",ABS:"E67E22",ASA:"D35400",TPU:"9B59B6",PC:"BDC3C7",PA:"2ECC71",NYLON:"2ECC71",PVA:"F1C40F",HIPS:"95A5A6",PP:"ECF0F1",PET:"3498DB"};function Lrt(t){const e=t.toUpperCase();for(const n of uce)if(new RegExp(`\\b${n}\\b`).test(e))return n;return null}function Irt(t){const e=t.replace(/@.+$/,"").trim(),n=e.toUpperCase();for(const r of uce){const i=n.indexOf(r);if(i>0){const s=e.slice(0,i).trim();if(s&&s.length>1)return s}}return null}function B3({preset:t,onDelete:e,onExpand:n,isExpanded:r}){const{t:i}=_t(),{hasPermission:s}=gr(),o=t.filament_type||Lrt(t.name),l=t.filament_vendor||Irt(t.name);let c=null,d=!1;if(t.default_filament_colour)try{const u=JSON.parse(t.default_filament_colour),m=Array.isArray(u)?u[0]:u;typeof m=="string"&&/^#?[0-9a-fA-F]{6,8}$/.test(m.replace("#",""))&&(c=m.replace("#","").slice(0,6),d=!0)}catch{const u=t.default_filament_colour;/^#?[0-9a-fA-F]{6,8}$/.test(u.replace("#",""))&&(c=u.replace("#","").slice(0,6),d=!0)}return!c&&o&&(c=Rrt[o.toUpperCase()]||null),a.jsx(wt,{className:"bg-bambu-dark border-bambu-dark-tertiary hover:border-bambu-dark-tertiary/80 transition-colors",children:a.jsxs(St,{className:"p-3",children:[a.jsxs("div",{className:"flex items-start justify-between gap-2",children:[a.jsxs("div",{className:"flex-1 min-w-0",children:[a.jsxs("div",{className:"flex items-center gap-2 mb-1",children:[t.preset_type==="filament"&&a.jsx("div",{className:`w-4 h-4 rounded-full border border-black/20 flex-shrink-0 ${!d&&!c?"opacity-25":d?"":"opacity-50"}`,style:{backgroundColor:c?`#${c}`:"#666"}}),a.jsx("span",{className:"text-sm font-medium text-white truncate",children:t.name})]}),a.jsxs("div",{className:"flex items-center gap-2 flex-wrap",children:[o&&a.jsx("span",{className:"text-xs px-1.5 py-0.5 rounded bg-bambu-green/20 text-bambu-green",children:o}),l&&a.jsx("span",{className:"text-xs text-bambu-gray",children:l}),a.jsx("span",{className:"text-xs px-1.5 py-0.5 rounded bg-blue-500/20 text-blue-400",children:i("profiles.localProfiles.badge")})]})]}),a.jsxs("div",{className:"flex items-center gap-1 flex-shrink-0",children:[s("settings:update")&&a.jsx("button",{onClick:()=>e(t.id),className:"p-1 text-bambu-gray hover:text-red-400 transition-colors",title:i("profiles.localProfiles.delete"),children:a.jsx(Zt,{className:"w-3.5 h-3.5"})}),a.jsx("button",{onClick:()=>n(r?null:t.id),className:"p-1 text-bambu-gray hover:text-white transition-colors",children:r?a.jsx(lc,{className:"w-3.5 h-3.5"}):a.jsx(zn,{className:"w-3.5 h-3.5"})})]})]}),r&&a.jsxs("div",{className:"mt-3 pt-3 border-t border-bambu-dark-tertiary text-xs space-y-1.5",children:[o&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.filamentType")}),a.jsx("span",{className:"text-white",children:o})]}),l&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.vendor")}),a.jsx("span",{className:"text-white",children:l})]}),t.nozzle_temp_min!=null&&t.nozzle_temp_max!=null&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.nozzleTemp")}),a.jsxs("span",{className:"text-white",children:[t.nozzle_temp_min,"–",t.nozzle_temp_max,"°C"]})]}),t.filament_cost&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.cost")}),a.jsx("span",{className:"text-white",children:t.filament_cost})]}),t.filament_density&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.density")}),a.jsxs("span",{className:"text-white",children:[t.filament_density," g/cm³"]})]}),t.pressure_advance&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.pressureAdvance")}),a.jsx("span",{className:"text-white",children:t.pressure_advance})]}),t.compatible_printers&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.compatiblePrinters")}),a.jsx("span",{className:"text-white truncate ml-2",children:(()=>{try{return JSON.parse(t.compatible_printers).join(", ")}catch{return t.compatible_printers}})()})]}),t.inherits&&t.inherits!==t.name&&a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.inheritsFrom")}),a.jsx("span",{className:"text-white truncate ml-2",children:t.inherits})]}),a.jsxs("div",{className:"flex justify-between",children:[a.jsx("span",{className:"text-bambu-gray",children:i("profiles.localProfiles.source")}),a.jsx("span",{className:"text-white capitalize",children:t.source})]})]})]})})}function Ort(){const{t}=_t(),{hasPermission:e}=gr(),n=tn(),{showToast:r}=rn(),[i,s]=w.useState(""),[o,l]=w.useState(null),[c,d]=w.useState(!1),[u,m]=w.useState(null),{data:p,isLoading:f}=Qe({queryKey:["localPresets"],queryFn:()=>oe.getLocalPresets()}),x=ot({mutationFn:async T=>{const F=[];for(const k of Array.from(T)){const E=new FormData;E.append("file",k),F.push(await oe.importLocalPresets(E))}return F},onSuccess:T=>{n.invalidateQueries({queryKey:["localPresets"]});let F=0,k=0,E=0;for(const $ of T)F+=$.imported,k+=$.skipped,E+=$.errors.length;F>0&&r(t("profiles.localProfiles.toast.importSuccess",{count:F})),k>0&&r(t("profiles.localProfiles.toast.importSkipped",{count:k}),"warning"),E>0&&r(t("profiles.localProfiles.toast.importError",{count:E}),"error")},onError:T=>{r(T.message,"error")}}),v=ot({mutationFn:T=>oe.deleteLocalPreset(T),onSuccess:()=>{n.invalidateQueries({queryKey:["localPresets"]}),m(null),r(t("profiles.localProfiles.toast.deleted"))}}),b=w.useCallback(T=>{!T||T.length===0||x.mutate(T)},[x]),g=w.useCallback(T=>{T.preventDefault(),d(!1),b(T.dataTransfer.files)},[b]),S=w.useCallback(T=>{if(!i)return T;const F=i.toLowerCase();return T.filter(k=>k.name.toLowerCase().includes(F)||k.filament_type?.toLowerCase().includes(F)||k.filament_vendor?.toLowerCase().includes(F))},[i]),N=w.useMemo(()=>S(p?.filament||[]),[p?.filament,S]),P=w.useMemo(()=>S(p?.printer||[]),[p?.printer,S]),C=w.useMemo(()=>S(p?.process||[]),[p?.process,S]),A=N.length+P.length+C.length;return f?a.jsx("div",{className:"flex items-center justify-center py-16",children:a.jsx(mt,{className:"w-8 h-8 text-bambu-green animate-spin"})}):a.jsxs("div",{className:"space-y-6",children:[e("settings:update")&&a.jsxs("div",{onDragOver:T=>{T.preventDefault(),d(!0)},onDragLeave:()=>d(!1),onDrop:g,className:`relative border-2 border-dashed rounded-lg p-6 text-center transition-colors ${c?"border-bambu-green bg-bambu-green/10":"border-bambu-dark-tertiary hover:border-bambu-gray"}`,children:[a.jsx("input",{type:"file",accept:".json,.zip,.orca_filament,.bbscfg,.bbsflmt",multiple:!0,className:"absolute inset-0 w-full h-full opacity-0 cursor-pointer",onChange:T=>b(T.target.files)}),x.isPending?a.jsxs("div",{className:"flex items-center justify-center gap-2",children:[a.jsx(mt,{className:"w-5 h-5 text-bambu-green animate-spin"}),a.jsx("span",{className:"text-bambu-gray",children:t("profiles.localProfiles.importing")})]}):a.jsxs(a.Fragment,{children:[a.jsx(_a,{className:"w-8 h-8 text-bambu-gray mx-auto mb-2"}),a.jsx("p",{className:"text-sm text-white font-medium",children:t("profiles.localProfiles.import")}),a.jsx("p",{className:"text-xs text-bambu-gray mt-1",children:t("profiles.localProfiles.importDesc")})]})]}),A>0&&a.jsxs("div",{className:"relative",children:[a.jsx(Nr,{className:"absolute left-3 top-1/2 -translate-y-1/2 w-4 h-4 text-bambu-gray"}),a.jsx("input",{type:"text",value:i,onChange:T=>s(T.target.value),placeholder:t("profiles.localProfiles.search"),className:"w-full pl-9 pr-4 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-sm text-white placeholder-bambu-gray focus:outline-none focus:border-bambu-green"})]}),A===0&&!f&&a.jsxs("div",{className:"text-center py-12",children:[a.jsx(Vg,{className:"w-12 h-12 text-bambu-gray mx-auto mb-3 opacity-50"}),a.jsx("p",{className:"text-bambu-gray",children:t("profiles.localProfiles.noPresets")}),a.jsx("p",{className:"text-xs text-bambu-gray/60 mt-1",children:t("profiles.localProfiles.importDesc")})]}),A>0&&a.jsxs("div",{className:"grid grid-cols-1 md:grid-cols-2 lg:grid-cols-3 gap-6",children:[N.length>0&&a.jsxs("div",{children:[a.jsxs("div",{className:"flex items-center gap-2 mb-3",children:[a.jsx(QP,{className:"w-4 h-4 text-bambu-green"}),a.jsx("h3",{className:"text-sm font-medium text-white",children:t("profiles.localProfiles.filament")}),a.jsxs("span",{className:"text-xs text-bambu-gray",children:["(",N.length,")"]})]}),a.jsx("div",{className:"space-y-2",children:N.map(T=>a.jsx(B3,{preset:T,onDelete:F=>m(F),onExpand:l,isExpanded:o===T.id},T.id))})]}),C.length>0&&a.jsxs("div",{children:[a.jsxs("div",{className:"flex items-center gap-2 mb-3",children:[a.jsx(ia,{className:"w-4 h-4 text-blue-400"}),a.jsx("h3",{className:"text-sm font-medium text-white",children:t("profiles.localProfiles.process")}),a.jsxs("span",{className:"text-xs text-bambu-gray",children:["(",C.length,")"]})]}),a.jsx("div",{className:"space-y-2",children:C.map(T=>a.jsx(B3,{preset:T,onDelete:F=>m(F),onExpand:l,isExpanded:o===T.id},T.id))})]}),P.length>0&&a.jsxs("div",{children:[a.jsxs("div",{className:"flex items-center gap-2 mb-3",children:[a.jsx(Hd,{className:"w-4 h-4 text-orange-400"}),a.jsx("h3",{className:"text-sm font-medium text-white",children:t("profiles.localProfiles.printer")}),a.jsxs("span",{className:"text-xs text-bambu-gray",children:["(",P.length,")"]})]}),a.jsx("div",{className:"space-y-2",children:P.map(T=>a.jsx(B3,{preset:T,onDelete:F=>m(F),onExpand:l,isExpanded:o===T.id},T.id))})]})]}),u!==null&&a.jsx("div",{className:"fixed inset-0 bg-black/50 flex items-center justify-center z-50",children:a.jsxs("div",{className:"bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg p-6 max-w-sm mx-4",children:[a.jsxs("div",{className:"flex items-center gap-2 mb-3",children:[a.jsx(Oa,{className:"w-5 h-5 text-red-400"}),a.jsx("h3",{className:"text-white font-medium",children:t("profiles.localProfiles.deleteConfirmTitle")})]}),a.jsx("p",{className:"text-sm text-bambu-gray mb-4",children:t("profiles.localProfiles.deleteConfirm")}),a.jsxs("div",{className:"flex justify-end gap-2",children:[a.jsx(De,{variant:"secondary",size:"sm",onClick:()=>m(null),children:t("profiles.localProfiles.cancel")}),a.jsxs(De,{variant:"danger",size:"sm",onClick:()=>v.mutate(u),disabled:v.isPending,children:[v.isPending?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(Zt,{className:"w-4 h-4"}),t("profiles.localProfiles.delete")]})]})]})})]})}function O5(t,e){const n=`${t} ${e||""}`,r=n.match(/@?\s*(?:BBL\s+)?(?:Bambu\s+Lab\s+)?([XPAH][1-9][A-Z]?(?:\s*(?:Carbon|mini))?|H2D)/i),i=r?r[1].trim():null,s=n.match(/(\d+\.?\d*)\s*(?:mm\s*)?nozzle|nozzle\s*(\d+\.?\d*)/i),o=s?(s[1]||s[2])+"mm":null,l=n.match(/(\d+\.?\d*)mm\s*(?:Standard|Fine|Extra Fine|Draft|Quality)?/i),c=l?l[1]+"mm":null,d=n.match(/\b(PLA|PETG|ABS|ASA|TPU|PC|PA|PVA|HIPS|PP|PET(?:-?CF)?|PA(?:-?CF)?|PLA(?:-?CF)?)\b/i),u=d?d[1].toUpperCase():null;return{printer:i,nozzle:o,layerHeight:c,filamentType:u}}function Zw(t){return/^(P[FPM]US|PF\d|PP\d)/.test(t)}function zrt({onSuccess:t,t:e}){const{showToast:n}=rn(),[r,i]=w.useState("email"),[s,o]=w.useState(""),[l,c]=w.useState(""),[d,u]=w.useState(""),[m,p]=w.useState(""),[f,x]=w.useState("global"),[v,b]=w.useState(null),[g,S]=w.useState(null),N=ot({mutationFn:()=>oe.cloudLogin(s,l,f),onSuccess:F=>{F.success?(n(e("profiles.login.toast.loggedIn")),t()):F.needs_verification?(b(F.verification_type||"email"),S(F.tfa_key||null),F.verification_type==="totp"?n(e("profiles.login.toast.enterTotp")):n(e("profiles.login.toast.codeSent")),i("code")):n(F.message,"error")},onError:F=>n(F.message,"error")}),P=ot({mutationFn:()=>oe.cloudVerify(s,d,g||void 0,f),onSuccess:F=>{F.success?(n(e("profiles.login.toast.loggedIn")),t()):n(F.message,"error")},onError:F=>n(F.message,"error")}),C=ot({mutationFn:()=>oe.cloudSetToken(m,f),onSuccess:()=>{n(e("profiles.login.toast.tokenSet")),t()},onError:F=>n(F.message,"error")}),A=F=>{F.preventDefault(),r==="email"?N.mutate():r==="code"?P.mutate():r==="token"&&C.mutate()},T=N.isPending||P.isPending||C.isPending;return a.jsx(wt,{className:"max-w-md mx-auto",children:a.jsxs(St,{children:[a.jsxs("div",{className:"text-center mb-6",children:[a.jsx("div",{className:"inline-flex items-center justify-center w-12 h-12 rounded-xl bg-bambu-green/20 mb-3",children:a.jsx(qg,{className:"w-6 h-6 text-bambu-green"})}),a.jsx("h2",{className:"text-xl font-semibold text-white",children:e("profiles.login.title")}),a.jsx("p",{className:"text-sm text-bambu-gray mt-1",children:e("profiles.login.subtitle")})]}),a.jsxs("form",{onSubmit:A,className:"space-y-4",children:[r==="email"&&a.jsxs(a.Fragment,{children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:e("profiles.login.email")}),a.jsx("input",{type:"email",value:s,onChange:F=>o(F.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none",placeholder:"your@email.com",required:!0})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:e("profiles.login.password")}),a.jsx("input",{type:"password",value:l,onChange:F=>c(F.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none",placeholder:"••••••••",required:!0})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:e("profiles.login.region")}),a.jsxs("select",{value:f,onChange:F=>x(F.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"global",children:e("profiles.login.regionGlobal")}),a.jsx("option",{value:"china",children:e("profiles.login.regionChina")})]})]})]}),r==="code"&&a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:e(v==="totp"?"profiles.login.totpCode":"profiles.login.verificationCode")}),a.jsx("p",{className:"text-xs text-bambu-gray mb-2",children:v==="totp"?e("profiles.login.enterTotpHint"):e("profiles.login.checkEmail",{email:s})}),a.jsx("input",{type:"text",value:d,onChange:F=>u(F.target.value.replace(/\D/g,"").slice(0,6)),className:"w-full px-3 py-3 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-center text-2xl tracking-widest font-mono focus:border-bambu-green focus:outline-none",placeholder:"000000",maxLength:6,required:!0})]}),r==="token"&&a.jsxs(a.Fragment,{children:[a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:e("profiles.login.accessToken")}),a.jsx("p",{className:"text-xs text-bambu-gray mb-2",children:e("profiles.login.accessTokenHint")}),a.jsx("textarea",{value:m,onChange:F=>p(F.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white text-xs font-mono placeholder-bambu-gray-dark focus:border-bambu-green focus:outline-none resize-none",placeholder:"eyJ...",rows:4,required:!0})]}),a.jsxs("div",{children:[a.jsx("label",{className:"block text-sm text-bambu-gray mb-1",children:e("profiles.login.region")}),a.jsxs("select",{value:f,onChange:F=>x(F.target.value),className:"w-full px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-white focus:border-bambu-green focus:outline-none",children:[a.jsx("option",{value:"global",children:e("profiles.login.regionGlobal")}),a.jsx("option",{value:"china",children:e("profiles.login.regionChina")})]})]})]}),a.jsxs("div",{className:"flex gap-2 max-[550px]:flex-wrap max-[550px]:items-center",children:[r==="code"&&a.jsx(De,{type:"button",variant:"secondary",onClick:()=>i("email"),className:"flex-1",children:e("profiles.login.back")}),a.jsxs(De,{type:"submit",disabled:T,className:"flex-1",children:[T?a.jsx(mt,{className:"w-4 h-4 animate-spin"}):a.jsx(VH,{className:"w-4 h-4"}),e(r==="email"?"profiles.login.loginButton":r==="code"?"profiles.login.verifyButton":"profiles.login.setTokenButton")]})]}),r==="email"&&a.jsx("div",{className:"pt-4 border-t border-bambu-dark-tertiary",children:a.jsxs("button",{type:"button",onClick:()=>i("token"),className:"text-sm text-bambu-gray hover:text-white flex items-center gap-2 transition-colors",children:[a.jsx(ao,{className:"w-4 h-4"}),e("profiles.login.useToken")]})}),r==="token"&&a.jsx("div",{className:"pt-4 border-t border-bambu-dark-tertiary",children:a.jsxs("button",{type:"button",onClick:()=>i("email"),className:"text-sm text-bambu-gray hover:text-white flex items-center gap-2 transition-colors",children:[a.jsx(VH,{className:"w-4 h-4"}),e("profiles.login.useEmail")]})})]})]})})}function xx({label:t,value:e,options:n,onChange:r}){const[i,s]=w.useState(!1),o=n.find(l=>l.value===e);return a.jsxs("div",{className:"relative",children:[a.jsxs("button",{onClick:()=>s(!i),className:"flex items-center gap-2 px-3 py-2 bg-bambu-dark border border-bambu-dark-tertiary rounded-lg text-sm text-white hover:border-bambu-gray-dark transition-colors",children:[a.jsxs("span",{className:"text-bambu-gray",children:[t,":"]}),a.jsx("span",{children:o?.label||"All"}),a.jsx(zn,{className:`w-4 h-4 text-bambu-gray transition-transform ${i?"rotate-180":""}`})]}),i&&a.jsxs(a.Fragment,{children:[a.jsx("div",{className:"fixed inset-0 z-10",onClick:()=>s(!1)}),a.jsx("div",{className:"absolute top-full left-0 mt-1 min-w-[160px] bg-bambu-dark-secondary border border-bambu-dark-tertiary rounded-lg shadow-xl z-20 py-1 max-h-60 overflow-y-auto",children:n.map(l=>a.jsxs("button",{onClick:()=>{r(l.value),s(!1)},className:`w-full px-3 py-2 text-left text-sm flex items-center justify-between hover:bg-bambu-dark-tertiary transition-colors ${e===l.value?"text-bambu-green":"text-white"}`,children:[a.jsx("span",{children:l.label}),l.count!==void 0&&a.jsx("span",{className:"text-bambu-gray text-xs",children:l.count})]},l.value))})]})]})}function Urt(){const[t,e]=w.useState(!1);w.useEffect(()=>{const r=()=>{e(window.scrollY>300)};return window.addEventListener("scroll",r),()=>window.removeEventListener("scroll",r)},[]);const n=()=>{window.scrollTo({top:0,behavior:"smooth"})};return t?a.jsx("button",{onClick:n,className:"fixed bottom-6 right-6 p-3 bg-bambu-green hover:bg-bambu-green-light text-white rounded-full shadow-lg shadow-bambu-green/25 transition-all z-40","aria-label":"Scroll to top",children:a.jsx(wp,{className:"w-5 h-5"})}):null}function H3({setting:t,onClick:e,onDuplicate:n,compareMode:r,isCompareSelected:i,compareIndex:s,compareDisabled:o,t:l}){const c=O5(t.name),d=Zw(t.setting_id);return a.jsxs("div",{className:"flex items-center gap-2 group",children:[a.jsx("button",{onClick:e,disabled:o,className:`flex-1 text-left px-3 py-2 rounded transition-colors ${i?"bg-blue-500/20 border border-blue-500/50":o?"bg-bambu-dark/50 opacity-40 cursor-not-allowed":"bg-bambu-dark hover:bg-bambu-dark-tertiary"} ${r&&!o?"cursor-pointer":""}`,children:a.jsxs("div",{className:"flex items-center gap-2",children:[i&&s!==void 0&&a.jsx("span",{className:"flex-shrink-0 w-5 h-5 rounded-full bg-blue-500 text-white text-xs flex items-center justify-center font-medium",children:s+1}),!i&&d&&a.jsx("span",{className:"flex-shrink-0 w-1.5 h-1.5 rounded-full bg-bambu-green",title:l("profiles.presets.myPreset")}),a.jsx("span",{className:"text-white text-sm truncate flex-1",title:t.name,children:t.name}),c.filamentType&&t.type==="filament"&&a.jsx("span",{className:"text-xs text-bambu-gray whitespace-nowrap",children:c.filamentType}),c.layerHeight&&t.type==="process"&&a.jsx("span",{className:"text-xs text-bambu-gray whitespace-nowrap",children:c.layerHeight}),c.printer&&a.jsx("span",{className:"text-xs text-bambu-gray whitespace-nowrap",children:c.printer})]})}),a.jsx("button",{onClick:u=>{u.stopPropagation(),n()},className:"opacity-0 group-hover:opacity-100 text-bambu-gray hover:text-white transition-all p-1",title:l("profiles.presets.duplicate"),children:a.jsx(ns,{className:"w-4 h-4"})})]})}function CI(t,e=0){const n="  ".repeat(e);if(t===null)return"null";if(t===void 0)return"undefined";if(typeof t=="string"){if(t.includes("\\n")||t.includes(`
 `)){const i=t.replace(/\\n/g,`
 `).replace(/\\"/g,'"').replace(/\\t/g,"	").split(`
 `);if(i.length>1)return`"""
diff --git a/static/index.html b/static/index.html
index 8ac8e4398..c46f54659 100644
--- a/static/index.html
+++ b/static/index.html
@@ -26,7 +26,7 @@
 
     <!-- Splash screens for iOS -->
     <link rel="apple-touch-startup-image" href="/img/android-chrome-512x512.png" />
-    <script type="module" crossorigin src="/assets/index-CTxVw43p.js"></script>
+    <script type="module" crossorigin src="/assets/index-D4GSGeyj.js"></script>
     <link rel="stylesheet" crossorigin href="/assets/index-7GmlJb0k.css">
   </head>
   <body>